1996 files changed, 172 insertions, 937068 deletions

diff --git a/.cvsignore b/.cvsignore
deleted file mode 100644
index 2a8035f11..000000000
--- a/.cvsignore
+++ /dev/null
@@ -1,5 +0,0 @@
-docs
-images
-unused
-drakxtools.tar.bz2
-isolinux
diff --git a/Makefile b/Makefile
deleted file mode 100644
index 305efcd2c..000000000
--- a/Makefile
+++ /dev/null
@@ -1,109 +0,0 @@
-ROOTDEST = /export
-
-DIRS = tools kernel mdk-stage1 perl-install
-
-
-ARCH := $(patsubst i%86,i386,$(shell uname -m))
-ARCH := $(patsubst sparc%,sparc,$(ARCH))
-
-ifeq (i386,$(ARCH))
-    BOOT_IMG = cdrom.img hd.img network.img usb.img blank.img pcmcia.img other.img
-endif
-ifeq (sparc,$(ARCH))
-    BOOT_IMG  = cdrom.img   hd.img   network.img   live.img   tftp.img   tftprd.img
-    BOOT_IMG += cdrom64.img hd64.img network64.img live64.img tftp64.img tftprd64.img 
-endif
-ifeq (ppc,$(ARCH))
-    BOOT_IMG = all.img
-endif
-ifeq (ia64,$(ARCH))
-    BOOT_IMG = all.img
-endif
-
-FBOOT_IMG = $(BOOT_IMG:%=images/%)
-FBOOT_RDZ = $(FBOOT_IMG:%.img=%.rdz) images/all.rdz
-
-.PHONY: dirs install
-
-build: dirs images
-
-dirs:
-	@for n in $(DIRS); do $(MAKE) -C $$n all || exit 1 ; done
-
-images: $(FBOOT_IMG)
-
-$(FBOOT_RDZ): kernel/all.modules
-	./make_boot_img $@ `basename $(@:%.rdz=%)`
-
-$(FBOOT_IMG): %.img: %.rdz
-	./make_boot_img $@ `basename $(@:%.img=%)`
-
-tar: clean
-	rpm -qa > needed_rpms.lst
-	cd .. ; tar cfj gi.tar.bz2 gi
-	rm needed_rpms.lst
-
-install: build rescue
-	for i in images misc Mandrake Mandrake/base Mandrake/share; do install -d $(ROOTDEST)/$$i ; done
-    ifneq (ppc,$(ARCH))
-	for i in $(FBOOT_IMG); do cp -f $${i}* $(ROOTDEST)/images; done
-    endif
-    ifeq (alpha,$(ARCH))
-	for i in $(FBOOT_RDZ); do cp -f $${i}* $(ROOTDEST)/boot; done
-	cp -f vmlinux.gz $(ROOTDEST)/boot/instboot.gz
-	make -C tools/$(ARCH)/cd install ROOTDEST=$(ROOTDEST)
-    endif
-	cd $(ROOTDEST)/images; rm -rf alternatives 
-	if [ `ls $(ROOTDEST)/images/*.img-* 2>/dev/null | wc -l` -gt 0 ]; then	\
-	  cd $(ROOTDEST)/images; mkdir alternatives; cd alternatives; mv ../*.img-* .; md5sum *.img-* > MD5SUM; \
-	fi
-	cd $(ROOTDEST)/images; md5sum *.img* > MD5SUM
-
-    ifeq (i386,$(ARCH))
-	rm -rf $(ROOTDEST)/isolinux
-	cp -af isolinux $(ROOTDEST)
-    endif
-
-	install live_update $(ROOTDEST)/live_update
-	make -C perl-install full_stage2
-	make -C perl-install/share/advertising install
-
-clean:
-	rm -rf images all.modules all.modules64
-	for i in $(DIRS) rescue; do make -C $$i clean; done
-	find . -name "*~" -o -name ".#*" | xargs rm -f
-
-check:
-	@badrights=`find $(ROOTDEST)/Mandrake/mdkinst | perl -lne 'print if !((stat)[2] & 4)'`; [ -z "$$badrights" ] || { echo "bad rights for files vvvvvvvvvvvvvvvvvvvvvvvvvv" ; echo "$$badrights" ; echo "bad rights for files ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^" ; exit 1; }
-	@missing_kb=`find -name "Entries" | xargs perl -F/ -alne 'print $$ARGV =~ m|(.*)/CVS|, "/$$F[1]" if $$F[1] =~ /\.(png|gif|bmp|xcf|gz|bz2|tar|rdz|so|a|o|mar|img|exe)$$/ && $$F[4] ne "-kb"'` ; [ -z "$$missing_kb" ] || { echo "missing -kb in CVS for files vvvvvvvvvvvvvvvvvvvvvvvvvv" ; echo "$$missing_kb" ; echo "missing -kb in CVS for files ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^" ; exit 1; }
-	$(MAKE) -C perl-install check
-
-upload: 
-	$(MAKE) clean
-
-#	# done before make install to increment ChangeLog version
-	tools/addchangelog.pl tools/cvslog2changelog.pl | tools/mailchangelog.pl &
-
-	$(MAKE) install
-	$(MAKE) check
-	$(MAKE) upload_only
-
-upload_only:
-	function upload() { rsync -qSavz --verbose --exclude '*~' -e ssh --delete $(ROOTDEST)/$$1/$$2 mandrake@ken:/c/cooker/$$1; } ;\
-	upload Mandrake/mdkinst '' ;\
-	upload Mandrake/base compssUsers* ;\
-	upload Mandrake/base rpmsrate ;\
-	upload Mandrake/base *_stage2.bz2 ;\
-	upload Mandrake/share/advertising '' ;\
-	upload misc gendistrib ;\
-	upload misc make_mdkinst_stage2 ;\
-	upload misc packdrake ;\
-	upload misc packdrake.pm ;\
-	upload misc rpmtools.pm ;\
-	upload misc auto ;\
-	upload '' live_update ;\
-	upload images MD5SUM ;\
-	upload images *.img* ;\
-	upload images/alternatives '' ;\
-	upload isolinux '' ;\
-	echo
diff --git a/docs/.cvsignore b/docs/.cvsignore
deleted file mode 100644
index a0593a470..000000000
--- a/docs/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-pictures
diff --git a/docs/BUGS b/docs/BUGS
deleted file mode 100644
index 1d154fcf1..000000000
--- a/docs/BUGS
+++ /dev/null
@@ -1,10 +0,0 @@
-doInstallStep: if there's not enough room, error, but packages are marked installed :(
-
-when you click directly on setupFilesystems and you have scsi, you're fucked.
-Even if you go to setupSCSI, you won't be able to have partitions again.
-
-bug non reproductible:
-- /etc/passwd is empty after `root passwd' stage :(
-- reboot at the end of package installation with a lot of error messages from
-gtk about the progressbar
-
diff --git a/docs/COPYING b/docs/COPYING
deleted file mode 100644
index 60549be51..000000000
--- a/docs/COPYING
+++ /dev/null
@@ -1,340 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) 19yy name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/docs/HACKING b/docs/HACKING
deleted file mode 100644
index a517839ba..000000000
--- a/docs/HACKING
+++ /dev/null
@@ -1,126 +0,0 @@
--=-=--
-DrakX is a very big project, and it needs special setups to work.
-The purpose of this file is to explain how you can setup your box to make it
-compile and run.
--=-=--
-
-Beware, don't try this on a production machine with important data.
-
-
---------------------------------------------------------------------------
-Sources installation:
-
-  First grab the gi.tar.bz2 archive and untar it in your home directory,
-for example from DrakX-*.src.rpm on your Mandrake Linux distribution.
-
-cd to gi
-for i in `du -a | grep CVS/Root | cut -f 2`
-do
-  sed -e 's/prigaux/anoncvs/' $i > $i.tmp
-  mv $i.tmp $i
-done
-
-Then, log yourself into the cvs:
-% export CVS_RSH=ssh
-% export CVSROOT=:ext:anoncvs@cvs.mandrakesoft.com:/cooker
-% cvs checkout gi
-	(passwd: 'cvs')
-And update the gi package:
-cvs update -P -d
-
-
---------------------------------------------------------------------------
-Preparing the compilation process:
-
-(1) target directory
-
-create a /export directory and copy a recent Mandrake Linux CD in there.
-(You don't have to put have all the RPMS...) ; you'll need roughly 1.5
-Gbytes for a full install.
-
-[gc@obiwan ~/cvs/gi] su -c "mkdir /export"
-
-
-(2) devel packages
-
-you need quite a few devel packages to run the stuff; roughly: gcc, make,
-glibc-devel, perl-devel, XFree86-devel, libglib-devel, libgtk+-devel,
-perl-GTK, ldetect*, libslang-devel, libnewt-devel, e2fsprogs, dosfstools,
-rpm-devel, popt-devel, rpmtools, libbzip2*, libncurses*.
-
-you may need a few others I forgot to mention. if the compilation
-fails, try to understand the message and install any necessary
-remaining package.
-
-
-(3) sudo
-
-never build or run DrakX as root; install package sudo, and set up
-relevant permissions; the following should be enough: (in your
-/etc/sudoers)
-
-gc ALL=(root) NOPASSWD:/usr/bin/patch,NOPASSWD:/bin/rpm,NOPASSWD:/bin/mount,NOPASSWD:/bin/cp,NOPASSWD:/bin/umount,NOPASSWD:/usr/bin/install,NOPASSWD:/bin/rm,NOPASSWD:/bin/mv,NOPASSWD:/bin/tar,NOPASSWD:/bin/cpio,NOPASSWD:/bin/chown,NOPASSWD:/bin/mkdir,NOPASSWD:/usr/bin/strip
-
-
-(4) boot kernel
-
-you need one or more kernels and (all?) their modules. it's located in
-subdirectory "all.kernels" in DrakX-*.src.rpm ; if you ever grab (or
-build) another boot kernel, replace or add an entry in "all.kernels" as:
-
-	(a) create your modules subdir (useful to describe the
-            VERSION_RELEASE) and untar your kernel
-
-[gc@obiwan ~/cvs/gi/all.kernels] mkdir 2.4.1-BOOTcustom
-[gc@obiwan ~/cvs/gi/all.kernels] cd 2.4.1-BOOTcustom
-[gc@obiwan ~/cvs/gi/all.kernels/2.4.1-BOOTcustom] tar jxvf ~/mycustomkernel.tar.bz2
-[gc@obiwan ~/cvs/gi/all.kernels/2.4.1-BOOTcustom] ls
-boot/  cardmgr/  lib/
-
-	(c) build kernel/modules stuff for stage1 and stage2
-[gc@obiwan ~/cvs/gi] ./update_kernel
-
-
-(5) pray
-
-[gc@obiwan ~/cvs/gi] make
-
-
----------------------------------------------------------------------------
-The comments written with #- are automatically stripped out at install.
-
-
----------------------------------------------------------------------------
-testing all:
-
-  go to the perl-install directory and execute ./g_auto_install --test
-
-  You should be able to test the whole thing in a non-destructive way.
-
-NEVER compile and/or execute DrakX as root!
-
-
-
-
-Here is how I (dams) made it work on my computer.
--------------------------------------------------
-
-- get the sources
-- install the librairies needed included newt-devel gtk+-devel popt-devel popt gtk-engines
-- cd path/to/gi
-- make
-- mkdir /usr/share/gtk
-- ln -s path/to/gi/perl-install/share/themes /usr/share/gtk
-- ln -s path/to/gi/perl-install/share/step-* /usr/share
-- ln -s path/to/gi/perl-install/share/help.xpm /usr/share
-- ln -s path/to/gi/perl-install/share/isdn* /etc/sysconfdir/network-scripts
-- have a cd architecture linked on /export
-- ln -s /export /tmp/rhimage
-- export PERL_INSTALL_TEST=1
-- cd path/to/gi/perl-install
-- gendistrib --noclean --distrib /export
-- ./install2 in root (dangerous) or chmod a+r /dev/hd* and ./install2 in user
-
-
-
-address all bugreports to dave@null.com
diff --git a/docs/README b/docs/README
deleted file mode 100644
index d35508e66..000000000
--- a/docs/README
+++ /dev/null
@@ -1,377 +0,0 @@
-Well here is a little description of what DrakX needs to work in comparison
-to the RH newt install.
-
-********************************************************************************
-* CVS **************************************************************************
-********************************************************************************
-Like all good free software, DrakX is in CVS :)
-
-You can access it at http://www.mandrakelinux.com/cgi-bin/cvsweb.cgi/gi
-
-or via
-
-export CVS_RSH=ssh
-export CVSROOT=:ext:anoncvs@cvs.mandrakesoft.com:/cooker
-cvs checkout gi
- (enter password 'cvs')
-
-
-This is only read-only access. If you want more, tell me (pixel@mandrakesoft.com)
-
-Alas, all is not in CVS as a lot of things are binary files.
-
-For the boot kernel, see https://kenobi.mandrakesoft.com/~chmou/kernel/BOOT/
-or build your own: 
-- install the kernel-*.src.rpm from
-- go to the /usr/src/RPM/SPECS/ (or any others topdir you have configured).
-- type rpm -ba --with BOOT kernel-2.4.spec.
-Then see function install_kernel() at the end of gi/update_kernel.
-
-For the other things, take SRPMS/DrakX-*.src.rpm
-
-Please note that redoing *all* the stuff is not for the faint of heart. I myself
-sometimes wonder what the whole make does :-%
-Instead, changing some .pm files is quite easy (nice interpreted language)
-
-********************************************************************************
-* Making your custom install ***************************************************
-********************************************************************************
-If you have your own rpms you want to add, or make your own updated cdrom, you
-just have to issue:
-
-% gendistrib --noclean --distrib <DIRS>
-
-Where <DIRS> is the root of all the media that the install will see, this first
-one is the main one :
-
-(1) network or 1-cdrom installs
-	DIRS == the root directory of the Distribution
-
-(2) multi-cdrom install
-	DIRS == the root directories of all the media that the install will see
-
-``gendistrib'' will scan the file Mandrake/base/hdlists in the main root
-directory (the first one in DIRS) to search for all media used. Typically you
-use Mandrake/RPMS* for RPM packages repository.
-For multi-cd, please use Mandrake/RPMS or Mandrake/RPMS1, Mandrake/RPMS2, etc.
-For one CD or a network/hd volume, please use Mandrake/RPMS.
-
-Optionnally, you can modify ``Mandrake/base/rpmsrate''; this file manages
-the relative importance of the files, and thus their installation or not.
-
-Also, mdkinst_stage2.gz must be remade if you modify files in Mandrake/mdkinst.
-See below for information about these files.
-
-********************************************************************************
-* FILES ************************************************************************
-********************************************************************************
-First here are the different things needed :
-
-Mandrake/base/hdlists
-	description of the available install media.
-	format is one line for one medium as
-		<hdlist_name> <rpms_directory> <description>
-	<hdlist_name> should be match regexp /hdlist\S*.cz2?/
-	for example (two cd install) you get
-		hdlist1.cz	Mandrake/RPMS1	Boot CD
-		hdlist2.cz	Mandrake/RPMS2	Extension CD
-
-Mandrake/base/hdlist*.cz
-	table of rpm's headers, referred by ``hdlists''
-	their contents can be listed using ``packdrake -l <hdlist_file>'' or
-	or ``parsehdlist <hdlist_file>''.
-	! Need to be remade when Mandrake/RPMS* changes (with ``gendistrib'') !
-
-Mandrake/base/depslist.ordered
-	for each packages, tell which package it depends on. Also contains the
-	size for some (obscure) bloody reasons.
-	! Need to be remade when Mandrake/RPMS* changes !
-	(with ``gendistrib --noclean --distrib .'')
-
-Mandrake/base/compss
-	obsoletes comps. It store packages in different categories, generated
-	from the %{GROUP} field
-	! Need to be remade when Mandrake/RPMS* changes !
-	(with ``gendistrib --noclean --distrib .'')
-
-Mandrake/base/rpmsrate
-	ranks and classify packages, so that the installer will know which
-        ones to install. format is :
-		<intern_group>
-			<level> <packages>
-	where <intern_group> is a symbolic name used in Mandrake/base/compssUsers* files,
-	and <level> defines importance level as described below :
-		5	must have
-		4	important
-		3	very nice
-		2	nice
-		1	maybe
-	by default (for non expert), group selects packages for level 4 (important)
-	and 5 (must have). export mode add 3 (very nice) level. other level (below 2)
-	can only be selected using individual package selection.
-
-Mandrake/mdkinst
-	live system used on certain installs. See ``Ramdisk or not'' below for
-	more.
-
-Mandrake/base/mdkinst_stage2.bz2
-	for the ramdisk. live sytem in ext2 filesystem bzipped2.
-	generated from Mandrake/mdkinst tree using misc/make_mdkinst_stage2
-	See ``Ramdisk or not'' below for more.
-
-Mandrake/base/rescue_stage2.bz2
-	rescue ramdisk. live sytem in ext2 filesystem bzipped2.
-	this is the ramdisk loaded when typing rescue on boot prompt.
-	there is no live system available, only the ramdisk is used.
-
-images/*.img
-	boot images to use with DrakX. Use:
-	- cdrom for cdrom install
-	- network for ftp/nfs install (non-pcmcia devices)
-	- hd for hard-disk install
-	- pcmcia for pcmcia install (see ``PCMCIA install'' below for more)
-
-	the following modules have been removed from:
-          network.img: acenic sk98lin de4x5
-          cdrom.img and hd.img: BusLogic seagate fdomain g_NCR5380 dc395x_trm tmscsim
-          hd.img: dpt_i2o eata eata_pio eata_dma
-          cdrom.img: aztcd gscd isp16 mcd mcdx optcd cm206 sjcd 
-          pcmcia.img: apa1480_cb
-	they are now in "other.img", 
-
-	blank.img is a blank boot image without a kernel nor initrd. this image
-	can be used to generate custom boot disk.
-
-	if you think one of those modules is used a lot, tell me, i may find some room
-	to put it back on the main floppies.
-
-
-********************************************************************************
-* logs *************************************************************************
-********************************************************************************
-During install, a lot of interesting stuff can be found in different places:
-in consoles and in files. To switch to console 2 for example, do Ctrl-Alt-F2
-from the X install.
-- alt-F1: the stdout of the install. Not very interesting stuff
-- alt-F2: simple shell. Quite a lot of commands are available but as they are
-written in perl (for space), they do not handle the very same options as normal.
-After install, you can do ``chroot /mnt'' to see your system just like after
-rebooting. ``rpm -qa'' works for example.
-- alt-F3: a lot of interesting things. Be carefull, some ``ERROR'' messages are
-not interesting.
-- alt-F4: kernel's place. aka the output of dmesg.
-- alt-F7: the graphical install lives there
-
-- command "bug" puts on floppy lots of interesting stuff.
-- /tmp/stage1.log: same as alt-F3 part when stage1 run (e.g. actions
-  before graphical install really begins)
-- /tmp/ddebug.log: (nearly the) same as latter alt-F3 part
-- /tmp/syslog: same as alt-F4
-- /mnt/root/drakx/ddebug.log: at the end of each step, DrakX tries to backup
-  /tmp/ddebug.log to /mnt/root/drakx. Available only after mounting of /.
-- /mnt/root/drakx/install.log: the log of the installation (or upgrade) of the rpms
-(just like rpm's /mnt/tmp/(install|upgrade).log)
-- /mnt/root/drakx/auto_inst.cfg.pl: a kickstart file generated at the end of each
-step. Can be used in 2 ways: kickstart install or ``defcfg'' install. Hopefully
-you know about kickstart. ``defcfg'' is a way to customize the default values in
-install. For example, French can be the default language with a qwerty keyboard,
-the auto-partitionning partitions can be changed, the default user class can be
-set to developer (!)...
-
-********************************************************************************
-* po translation files *********************************************************
-********************************************************************************
-DrakX uses .po files for its translation. A script takes the different
-strings out of the .pm files. It generates the DrakX.pot file which contains
-all the english strings to translate.
-To add a new language, you just have to add it to lang.pm (if it's not there
-already) and put the .po in the perl-install/po directory (see ``Ramdisk or
-not'' to know if you have to regenerate the mdkinst_stage2.gz)
-
-********************************************************************************
-* PCMCIA install ***************************************************************
-********************************************************************************
-If the media you use to install is a pcmcia device, use the pcmcia boot disk.
-
-********************************************************************************
-* Ramdisk or not ***************************************************************
-********************************************************************************
-The DrakX install is much bigger than the newt one. So the ramdisk which was
-used is getting big, and costs a lot in memory 
-(eg: the mdkinst_stage2 is 14MB - 23/09/99)
-(update! now size is 21MB - 24/01/01)
-(update! now size is 19MB - 26/04/01)
-
-|       | newt    | DrakX
-|-------+---------+----------------------------------------------------------
-| nfs   | live    | live
-| ftp   | ramdisk | ramdisk
-| http  | ramdisk | ramdisk
-| hd    | ramdisk | live if Mandrake/mdkinst/usr/bin/runinstall2 is a link,
-|       |         |   ramdisk otherwise
-| cdrom | ramdisk | live if memory < 52MB, ramdisk otherwise
-
-Where ramdisk is needed, if detected memory is below the limit allowed for
-ramdisk (maintained in file gi/mdk-stage1/config-stage1.h; currently 52 Mb),
-a failure dialog will be printed explaining that there is not enough memory
-to perform the installation.
-
-When i say live, it means that the stage1 will *mount* the
-Mandrake/mdkinst and use it that way.
-
-The ramdisk is used in place of the live in some cases. This ramdisk is filled
-with mdkinst_stage2.gz
-
-For cdrom install, the ramdisk is used to speed up things (access time is quite
-high on cdrom drives)
-
-For pcmcia, it depends on the type of install.
-
-
-********************************************************************************
-* modules **********************************************************************
-********************************************************************************
-Modules can be found in at least 2 places:
-- in /modules/modules.mar
-- in /lib/modules.cz<KERNEL_VERSION_RELEASE>
-
-/modules/modules.mar is used in mdk-stage1. It contains only modules
-interesting for one kind of install. For example in an hd install, it
-contains scsi modules. For a network install, it contains network card
-modules. (To create, extract or view files in a ``mar'' archive, please
-use gi/mdk-stage1/mar/mar; this is basically an archive format meant to
-be minimalistic)
-
-/lib/modules.cz<KERNEL_VERSION_RELEASE> contains all modules, it is used
-in stage2.
-
-
-To install a module, use modprobe which is in /usr/bin. It's a perl wrapper
-around /usr/bin/insmod. It uses the dependencies found in
-/modules/modules.dep (stage1).
-
-/usr/bin/insmod is a wrapper around /usr/bin/insmod_. It just extracts the
-module out of /lib/modules.cz in /tmp. Then it calls insmod_.
-
-/usr/bin/insmod_ is the real prog (which you usually find in /sbin/). You need
-to give it the complete path.
-
-********************************************************************************
-* Making screenshots ***********************************************************
-********************************************************************************
-1. easy solution: press "F2"!
-
-2. On a test machine, make a network install, switch to console (ctrl-alt-F2), enter:
-% xhost+
-then, on another computer:
-% DISPLAY=test_machine:0 xwd -root | convert - screenshot.png
-
-********************************************************************************
-* Miscellaneous ****************************************************************
-********************************************************************************
->  o Media access methods: nfs, ftp, http, hd, cdrom
->  o Stages: init, stage1, stage2
->    - What exactly each stage does
-
-init loads stage1
-stage1 loads stage2, on various medium type
-
-stage2 is too big to fit on a floppy, that's why stage1 exists
-
->    - How each stage relates to the various media access methods
-
-stage1 knows only how to access to the media is compiled for. It contains only
-the kernel modules needed for that media. For eg, the nfs/ftp/http stage1
-doesn't contain scsi modules nor ide.
-
->    - How one stage terminates and another begins. i.e., How does
->      stage1 find, mount, and launch stage2?
-
-/sbin/init just starts /sbin/stage1
-/sbin/stage1 takes care of mounting stage2 (in ramdisk if necessary)
-  then it runs /usr/bin/runinstall2
-
->  o Text and Graphic mode installers
->    - Architectural overview of each
-
-have a look at gi/docs/object_class.fig
-
-
-********************************************************************************
-* OEM **************************************************************************
-********************************************************************************
-> I am a system OEM in Bangalore,India selling systems bundled with
-> Mandrake Linux. The problem is that with every system I sell, I need to
-> install & configure the system which takes HOURS!. Can I do a diskcopy
-> instead?
-> 
-> Please Help. This is a major bottleneck for  me.
-
-many solutions:
-
-- make an install on drive hdb, then :
-      dd if=/dev/hdb of=/dev/hdc
-  but you should make sure the hardware is *REALLY* identical.
-
-- try the oem feature
-   3. - burn a cd out of *latest* cooker or 8.0 and above.
-      - boot on it telling "oem" to syslinux
-      !! it will destroy every data on the harddrive or
-         resize (or use free space) if *ONLY* one fat partition is defined !!
-      - you now have a very automated install matrix 
-      (duplicate it with "dd if=/dev/hdb of=/dev/hdc bs=1M count=730")
-
-    put the harddrive in the oem box, the user will now have an *very* automated
-    install, just asking the root password and user password, and some other
-    question according its hardware.
-
-   4. just like 3. but you may have to mount /cdrom after typing rescue on
-      syslinux prompt (oem script do it automatically if a automatic boot nfs
-      network has been done as server is known). under /cdrom may be anything
-      as long as it provides an installation tree of Mandrake Linux.
-      after that run oem script by typing "/etc/oem -f" for normal installation
-      or "/etc/oem -f server" for server installation (normal with server installed).
-
-   5. (just like 3. without burning a cd, doing the first part by hand)
-      have a look at the /etc/oem script on the rescue and do it by hand...
-
-
-cu Pixel, fpons.
-
-
-comments:
-1. maybe copy unnecessary things -> take too long
-   solution -> use bs=8k count=xxxx 
-2. kernel_reread can be found on the new rescue, source is also at end of this
-mail. This solution works with one partition. Can be easily enhanced to many
-primary partitions... For extended partitions, more complicated, but not much :)
-3. has just been added in latest cooker. It may still have some pb. The main
-current limitation is IDE only, though it can be fixed easily for special cases.
-
---------------------------------------------------------------------------------
-#include <stdio.h>
-#include <sys/mount.h>
-#include <fcntl.h>
-
-void die(char *msg)
-{
-  perror(msg);
-  exit(1);
-}
-
-void kernel_read(char *dev)
-{
-  int fd;
-  if ((fd = open(dev, O_RDONLY)) == -1) die("can't open device");
-  ioctl(fd, BLKRRPART, 0);
-  close(fd);
-}
-
-int main(int argc, char **argv) 
-{
-  if (argc != 2) {
-    fprintf(stderr, "usage: kernel_read_part <hard drive device>\n");
-    exit(1);
-  }
-  kernel_read(argv[1]);
-}
diff --git a/docs/README.devel b/docs/README.devel
deleted file mode 100644
index 0244557ba..000000000
--- a/docs/README.devel
+++ /dev/null
@@ -1,252 +0,0 @@
-Well here is a little description of how DrakX can be modified or extended.
-Please refer to README file for getting DrakX code source and to known more
-exactly how it works and what it can do.
-
-
-********************************************************************************
-* Execution of DrakX ***********************************************************
-********************************************************************************
-DrakX has originally be written by pixel in perl and C.
-entry point for stage2 is /usr/bin/runinstall2 which is typically a link to
-/usr/bin/install2 which simply load module install2.pm and execute
-install2::main with @ARGV.
-
-install2::main parse command line arguments, prepare installation, find the right
-install_interactive class (take a look at gi/docs/object_class.fig) according to
-command line, memory available and if the interactive chosen is initializing
-correctly, else it will try a less-demanding interactive object.
-Once done, $::o is set to this install & interactive object and main runs the
-various step of install2 defined in $o->{steps}, starting with $o->{steps}{first}
-and iterating with method install_any::getNextStep().
-while running step, it trap any errors that may arise and use perl exception to
-change step.
-
-********************************************************************************
-* DrakX modules descriptions ***************************************************
-********************************************************************************
-Here is a brief description of what each modules of DrakX is doing.
-
-install2: main module of DrakX as described above, main loop execution of DrakX.
-
-install_steps: generic installation module containing steps definition, all steps
-  should always be defined here as some methods may be used on automatic mode.
-  there is no interactivity available. typically are defined base operation for
-  configuring each step according to $o.
-
-install_steps_interactive: generic installation module with generic interative
-  methods. typically are found all interactive code of DrakX for each steps.
-
-install_steps_auto_install: implementation installation module without interactive
-  methods to match auto_install mode. this is the simplest as almost no method are
-  redefined (inherit module install_steps only, compared to other implementation
-  modules described below).
-
-install_steps_stdio: implementation installation module with interactive stdio
-  methods to match stdio mode. inherit modules install_steps_interactive and
-  interactive_stdio.
-
-install_steps_newt: implementation installation module with interactive newt
-  methods to match newt mode. inherit modules install_steps_interactive and
-  interactive_newt.
-
-install_steps_gtk: implementation installation module with interactive gtk
-  methods to match gtk mode. inherit modules install_steps_interactive and
-  interactive_gtk.
-
-install_any: contains various methods using generic interactive interface but
-  not used by standalone tools.
-
-install_gtk: contains various methods using gtk interface but not used by
-  standalone tools.
-
-interactive_stdio: implementation methods for interactivity in stdio mode.
-  inherit module interactive.
-
-interactive_newt: implementation methods for interactivity in newt mode.
-  inherit module interactive.
-
-interactive_gtk: implementation methods for interactivity in gtk mode.
-  inherit module interactive.
-
-my_gtk: basic gtk access methods.
-
-any: contains various methods using generic interactive interface. to compare
-  against install_any module as this one is available for standalone tools.
-
-class_discard: simple module that implement every methods undefined to return
-  nothing. this trick is used to ensure no undefined method can arise when using
-  code that reference interactive method which are not defined.
-
-common: contains very simple and very usefull (common) methods to do various task.
-  some methods inspired by functionnal language.
-
-c: contains wrapper to C definition of methods used by DrakX, use of C is necessary
-  for C extern libraries interface (rpmlib, ldetect), kernel interface, XFree
-  interface.
-
-commands: implement some un*x commands, conflicting name with perl contains
-  trailing underscore (_). this module is used by commands perl script that
-  determine which command to run according to $0 (this is used this way when DrakX
-  is running).
-
-run_program: allow running a program with redirection but without using a shell.
-  allow rooted execution.
-
-help: contains all help message displayed by DrakX.
-
-log: log facility methods.
-
-lang: language manipulation methods, get and set sysconfig file, load po.
-
-keyboard: keyboard manipulation methods, get and set sysconfig file, set console
-  keyboard mapping.
-
-mouse: mouse manipulation methods, get and set sysconfig file, change mouse.
-
-timezone: time zone manipulation methods, get and set timezone.
-
-services: services manipulation methods, activate or delete services (see
-  /etc/rc.d/init.d directories).
-
-detect_devices: manage detection of various class of hardware.
-
-devices: manage device file, create device special according device name.
-
-partition_table: base partition table management methods, it manages
-  appriopriate partition_table_XXX object according to what has been read
-  as XXX partition table type.
-
-partition_table_raw: generic class for the following partition_table_XXX.
-
-partition_table_emtpy: matches an empty partition table.
-
-partition_table_dos: matches a DOS partition table.
-
-partition_table_bsd: matches a BSD partition table.
-
-partition_table_mac: matches an Apple partition table.
-
-partition_table_sun: matches a Sun Label partition table.
-
-fs: read and write /etc/fstab file, mount and umount, format.
-
-fsedit: manage (modyfy, edit) mount point associated to partition (like editing
-  /etc/fstab).
-
-swap: swap management methods, format and mount (activation).
-
-raid: raid (software only) management methods.
-
-lvm: lvm (Logical Volume Manager) management methods.
-
-loopback: loopback management methods, used for lnx4win type installation or using
-  a file as a partition.
-
-diskdrake: diskdrake itself, disk graphical (using gtk) manipulation tools.
-
-ftp: ftp mangement methods, used when using ftp install.
-
-http: http management methods, used when using http install.
-
-modparm: kernel modules options management, allow building nice dialog with each
-  module parameter available.
-
-modules: kernel modules management, allow loading or unloading (ala modprobe or
-  insmod).
-
-printer: printer management methods, read and write both LPR or CUPS configuration.
-
-printerdrake: interactive printer management methods.
-
-network: network management methods, get and set sysconfig file.
-
-netconnect: network configuration wizard.
-
-netconnect_const: network configuration wirard data.
-
-Xconfig: X configuration (monitor + already existing config file) management.
-
-Xconfigurator: X configuration wizard.
-
-Xconfigurator_const: X configuration wizard data.
-
-booloader: bootloader (LILO, GRUB, LOADLIN, SILO) configuration management methods.
-
-pkgs: rpm package and hdlist, depslist management methods, allow selecting or
-  unselecting packages, manage rpmsrate file and select group, installation and
-  removal methods of rpm file.
-
-crypto: *obsoleted* module to manage crypto site and rpm file.
-
-standalone: standalone only, allow defining a standalone tools.
-
-bootlook: standalone only, interface with DrakConf to configure bootloader options.
-
-tinyfirewall: standalone only, interface with DrakConf to configure a tiny firewall.
-
-********************************************************************************
-* DrakX FAT resizer module description *****************************************
-********************************************************************************
-here is a fat resizer written in perl and C used by DrakX (diskdrake) to resize
-FAT16/FAT32 partition. it moves clusters to make sure a shrink can be done on the
-limit of the partition itself, if no cluster need to be moved, only boot sector
-partition limit are modified.
-
-any: various methods to flag cluster, compute min size.
-
-boot_sector: boot sector management methods.
-
-c_rewritten: originally resize_fat was only perl, this contains code section that
-  are the most sensible to speed or memory contraints and have been rewritten to C
-  using perl extension.
-
-dir_entry: manage directory structure.
-
-directory: traverse directory recursively, needed to move correctly cluster.
-
-fat: manage fat structure.
-
-info_sector: manage info sector.
-
-io: manage I/O on disk (need to take care of big file as partition size may be
-  larger than 2GB).
-
-main: main resizer algortihm. if needed allocate new clusters, copy files, copy
-  directories. update boot sector info.
-
-********************************************************************************
-* Adding a new step to DrakX ***************************************************
-********************************************************************************
-Say we want to add a question for setting "alawindows" option.
-We put it pretty early in the install, let's say after "Select Installation
-Class".
-
-1. in install2.pm
-
-add
-
-  selectAlawindows => [ __("A la windows or not"), 0, 1, '' ],
-
-after
-
-  selectInstallClass => [ __("Select installation class"), 1, 1, '' ],
-
-the 0, 1, '' means not "redoable", "skip on error", "don't hide"
-
-2. add your function selectAlawindows in install2.pm
-
-sub selectAlawindows  { $o->selectAlawindows }
-
-3. add your function selectAlawindows in install_steps_interactive.pm
-
-sub selectAlawindows {
-    my ($o) = @_;
-    $o->{alawindows} = $o->ask_yesorno('', _("Throw everything away as windobe does?"), 1);
-}
-
-4. add your function selectAlawindows in install_steps.pm (not needed in that
-case, except for auto_install)
-
-sub selectAlawindows  {}
-
-
diff --git a/docs/README.pxe b/docs/README.pxe
deleted file mode 100644
index 2ddd205fe..000000000
--- a/docs/README.pxe
+++ /dev/null
@@ -1,133 +0,0 @@
-Here is a short description to configure a PXE server using dhcpd and tftpd.
-This allows a network boot for your ethernet card conforming to the Interl
-PXE specification.
-
-********************************************************************************
-**********                       General overview                   ************
-********************************************************************************
-
-You need a dhcp server and a tftp server on one or two machines to allow the 
-network boot. We are not using a PXE server to achieve this as it is not
-mandatory. 
-You can install tftp-server and dhcp-server package from the Mandrake
-distribution for example.
-
-On the server machine at 192.168.2.1, you will find a "/etc/dhcpd.conf" sample
-file written by Florin Grad <florin@mandrakesoft.com>, where "mydomain.com" is
-assumed to be your domain name, and 192.168.1.1 a name server. All install are
-done on subnet 192.168.2.0.
-
-All the files that will be downloaded by the tftp daemon are located under 
-"/tftpboot" :
-  "/tftpboot/pxelinux.0" is a program that is loaded directly by the machine
-                         where a network boot will be done, this program comes
-                         from the SYSLINUX package by H. Peter Anvin. (look at
-                         http://syslinux.zytor.com/pxe.php for more information)
-  "/tftpboot/pxelinux.cfg/" is a directory where all configuration file for
-                         pxelinux.0 will be found, pxelinux.0 will download
-                         these file by itself. It searches first for a file
-                         named accordind to the machine IP address in
-			 hexadecimal, for example for 192.168.2.20, it
-			 looks for "C0A80214" first, then "C0A8021" and so
-			 on down to "C0", "C" and "default".
-  "/tftpboot/network.rdz" is the standard network initrd for Mandrake installation.
-  "/tftpboot/vmlinuz"    is the boot kernel for installation.
-  "/tftpboot/help.msg"   is the message displayed by pxelinux.0, note that currently
-                         graphical message (as for install using SYSLINUX 1.48 with
-                         graphic patch by Mandrake) is not supported.
-
-All file "network.rdz", "vmlinuz", "help.msg" can be found by mounting "network.img",
-or the network floppy disk used for install, "pxelinux.cfg" is just an adaptation
-of the file found on the "network.img" called "syslinux.cfg" but without the reference
-to boot.msg (as it is not currently supported).
-
-Update network configuration for your needs and start dhcp server on the machine and
-tftp server and this should work.
-
-********************************************************************************
-* /etc/dhcpd.conf **************************************************************
-********************************************************************************
-ddns-update-style ad-hoc;
-
-authoritative;
-
-option space PXE;
-option PXE.mtftp-ip code 1 = ip-address;
-option PXE.mtftp-cport code 2 = unsigned integer 16;
-option PXE.mtftp-sport code 3 = unsigned integer 16;
-option PXE.mtftp-tmout code 4 = unsigned integer 8;
-option PXE.mtftp-delay code 5 = unsigned integer 8;
-option PXE.discovery-control code 6 = unsigned integer 8;
-option PXE.discovery-mcast-addr code 7 = ip-address;
-
-default-lease-time 28800;
-max-lease-time 86400;
-
-option domain-name "mydomain.com";
-option domain-name-servers 192.168.1.1;
-
-class "PXE" {
-  match if substring(option vendor-class-identifier, 0, 9) = "PXEClient";
-  option vendor-class-identifier "PXEClient";
-
-  vendor-option-space PXE;
-  option PXE.mtftp-ip 0.0.0.0;
-  next-server 192.168.2.1; #tftp server location
-
-  filename "pxelinux.0";          # standard TFTP
-
-}
-
-shared-network "mynetwork" {
-  subnet 192.168.2.0 netmask 255.255.255.0 {
-    option subnet-mask 255.255.255.0;
-    option routers 192.168.2.1;
-
-    ddns-domainname = "mydomain.com";
-
-    pool {
-      range 192.168.2.10 192.168.2.20;
-      allow members of "PXE";
-    }
-  } 
-}
-********************************************************************************
-* /tftpboot/pxelinux.cfg/default ***********************************************
-********************************************************************************
-default linux
-prompt 1
-timeout 72
-display help.msg
-label linux
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga=788
-label vgalo
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga=785
-label vgahi
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga=791
-label vga16
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga16
-label text
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 text
-label patch
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 patch vga=788
-label expert
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 expert vga=788
-label rescue
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 rescue rw
-label oem
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz automatic=method:cdrom root=/dev/ram3 rescue oem rw
-********************************************************************************
-* Usefull linkst ***************************************************************
-********************************************************************************
-
-http://syslinux.zytor.com/pxe.php
-http://www.kano.org.uk/projects/pxe/
diff --git a/docs/SHORTCUTS b/docs/SHORTCUTS
deleted file mode 100644
index 93a7133db..000000000
--- a/docs/SHORTCUTS
+++ /dev/null
@@ -1,51 +0,0 @@
-********************************************************************************
-main shortcuts
-
-F1 -> help
-F2 -> take a screenshot
-F11 -> previous step
-F12 -> next (reachable) step
-
-********************************************************************************
-diskdrake
-
-taken directly from diskdrake.pm:
-
-		"a" => \&Active,
-		"b" => \&Move,
-		"c" => \&Create,
-		"d" => \&Delete,
-		"f" => \&Format,
-		"m" => \&Mount_point,
-		"M" => \&Mount,
-		"n" => \&Create,
-		"o" => \&ReadFromFile,
-		"s" => \&SaveInFile,
-		"q" => \&Exit,
-		"r" => \&Resize,
-		"t" => \&Type,
-		"u" => \&Unmount,
-		"w" => \&WritePartitions,
-		"W" => \&WriteFstab,
-
-hopefully it is explicit enough :)
-
-********************************************************************************
-list choice
-
-- acceleration a la windows (default): enter a letter and the selection will move to the
-first entry beginning with that letter. If you enter another letter it will try
-to find the entry beginning with the 2 letters you have given. In case it fails
-the starting_word is reset.
-- incremental search a la emacs: searches trough the list
-
-Use control-s to use incremental search and then to search next occurence
-
-********************************************************************************
-in case of complete mouse sh**t
-
-XFree86 provides a way of moving the mouse pointer:
-- first, press Ctrl-Shift-NumLock
-- then move the pointer with the keypad arrows
-- press button is ``0'' (aka Inser)
-- release button is ``.'' (aka Suppr)
diff --git a/docs/TODO b/docs/TODO
deleted file mode 100644
index cb9399f82..000000000
--- a/docs/TODO
+++ /dev/null
@@ -1,515 +0,0 @@
--URGENT---------------------------------------------------------------------------------
-check for fpons/pixel BOTH that resize_fat is clean for current version
-relative to 7.0-2.
-
-heavy testing of diskdrake to avoid corrupting partition table, current version
-should be available to fix bogus partition table, writing enabled only when
-partition is Ok (fixme? allow primary partition inside extended one, but with
-warning on diskdrake startup, made them as warning ?).
-
--features-------------------------------------------------------------------------------
-add rpmdrake in menu
-
-(7.1 or later) clean SCSI CDROM autoboot.
-(done,gc,8.0) stage1 & cdrom: add ability in expert to choose the scsi cdrom drive to use
-
-(7.1)better help for partitioning in newbie
-
-(7.1)Improved network configuration (PPP and/or Ethernet)
-PPPoE install and configuration (SuSE includes it, DHCP-like)
-(7.1)standalone applications for configuration (netdrake, timetool, authentificationconf, soundcard)
-
-----
-(7.2) replace normal with standard (in the installClass's)
-
-(7.2 or later)horizontal sub-steps
-
-(7.2 or later)diskdrake in text mode
-
-ask "do you have SCSI?" before asking "probe PCI or not"
-
-(?) paride in stage1
-(done,gc,8.0) stage1 & network: add ability to choose the network interface to use
-
-(?) msec custom
-
-(?)firewall configuration (instant firewalling?)
-
-(?)widget for displaying fdisk (dindinx)
-add fdisk using the zvt widget (taken in gnome-libs)
-
-(?)help in some configuration files.
-
-ability to add nfs/weird_fs entries in fstab
-
-size of packages in crypto
-
--to test--------------------------------------------------------------------------------
-what's lseek64?
-
-ensure installClass is set to something in auto install.
-
-for axp, swriteboot -f1 if swriteboot failed.
-axp with swap part sigsegv
-
-tree for choosing monitors (buggy?)
-
-what happens if a module fails to insmod (scsi step), in beginner/normal/expert
-
-fstab must be sorted (/usr/local after /usr)
-
-RAID upgrades
-
-add choice clean /tmp or not in expert
-
-kernel chosen by default must be the one according to supermount/secure
-
-bug if ide-scsi, no more hdX, but scd0 (aka sr0)
- (and add alias block-major-11 ide-scsi ?)
-
-check on update for conf.modules and modules.conf !
-
-with /usr, /usr/local and /usr/local/e mount points i get an error at step mounting local filesystems
-
--easy fixes-----------------------------------------------------------------------------
-rpmdrake proposition for cdrom labels
-
-use option nocheck to mount for upgrades
-
--fixes needing thinking-----------------------------------------------------------------
-bug: changing mem= in miscellaneous doesn't modify lilo conf if you backtrack
-
-ask network configuration only if NIC found?
-
-configure DHCP for newbies if ethernet & DHCP card available
-
-xvidtune like screen configuration (see SuSE's yast)
-
-live cdrom for alpha (sparc?)
-
-network boot
-
-get the error when getting/reading .rpm files fail
-better timeout handling for network installs
-
-handle not enough room for update
-(fpons)verify the free space is big enough.
-
-the XFdrake test does not handle the fontset
-
-> Here I go into the printer configuration select 'HP Deskjet 722C Colour',
-> print a test ASCII page, pressing 'No' when prompted to indicate the page did
-> not print OK and then hitting cancel when prompted to choose a printer type
-> again.
-> ask_from_list cancel at /usr/lib/libDrakX/my_gtk.pm line 504.
-
-diskdrake: take from parted mklabel, hide(?)
-
-bug in kde desktop if keeps home but not an upgrade
-	
-bug in users: mandrake user is added twice in strange installs
-(mixed of security 0 + ???)
-
-bugs rpmdrake: 
-- just after installing a package, switch to `Installed', the package has wrong name
-- refresh the kde desktop after package installation in rpmdrake
-(restart kpanel)
-- rpmdrake and same name packages
-
-urpmi: pb if XXX-devel requires XXX = 1.2.3 and we updgrade XXX-1.2.3
-
-bug in defcfg in with lang=fr_FR, display is buggy
-
-bug keyboard focus: after switch in console at Xconfig step
-
-
-
--to look at--------------------------------------------------------------------------
-adduserdrake to remove/update users
-
-(???)free provider auto configuration facility (to be discussed).
-auto ppp-configure with free provider
-
-(?)on laptop, configure the MMU to use swap not very often
-
-(?)checkboxes in groups based on compssList (and availableSpace?)
-
-(?)see what can be done with nvram (50 bytes to save information)
-
-better wacom support
-
-(fpons)bug: CANON BJC 4X00 do not work with current rhs-printfilters
-  (work with magicfilters (debian))
-  (should be handled by ghostscript BJC600's driver)
-
-(pix)install text on mem=8M, mem=16M?
-
-(pix)kickstart
-partitioning? raid?
-X configuration and bootloader in kickstart
-
-XFdrake chooseResolutions with ask_from_list do not permit ``Show all''
-
-(?) options in mkfs, progress bar when formatting
-
-(?) when some error occurs, partition must be unset isFormatted
-
--hardware-------------------------------------------------------------------------------
-- with no floppy drive, mkbootdisk step fails badly
-- with bad floppy or write protected, mkbootdisk doesn't say anything
-- try detect_devices::floppies (and how are scsi floppies handled?)
-maybe: do a iotcl FDGETPRM to detect fd1, fd0.
-
-need a simple solution to precise mouse type (syslinux option?)
-
-ELSA Gloria has bad ddc info
-
-token ring is tr0 not eth0
-
-I have Mandrake 6.1  installed and working on a ThinkPad 770.
-To enable the PCMCIA Token ring I have to append the following line to
-/etc/pcmcia/config.opts
-module "ibmtr_cs" opts "mmiobase=0xd2000 srambase=0xd4000"
-
-smp not detected (mhoward@memphisonline.com on cooker, bios=BP6PW)
-
-UDMA66 (ultra66.o for promise)
-
-aha152x needs "insmod aha152x.o aha152x=0x140,11,7"
-
-(obsolete) usb module not removed if no mouse found
-
-(fpons)handle dat drives
-
-hibernation on laptop -> clock not restored
-
-# in 2.3.15 "Silicon Integrated Systems [SiS]|SiS900 10/100 Ethernet" is handled
-
-(?)enable the testing of the mouse type (under X) (wheel)
-possibility to specify the mouse
-
--(?)---------------------------------------------------------------------------------
-(?) handle NT (add entry for it in lilo, put it in fstab)
-
-(?) lilo-0.22-19mdk is buggy with boot=/dev/hde & root=/dev/sda13, it needs
-disk=/dev/hde bios=0x80 & disk=/dev/sda bios=0x81
-
-(?)using setxkb, enable the testing of the keyboard
-
-(?)XFdrake does not handle fbdev
-
-(?) Je viens de faire une installation sur une machine o� seul Be �tait
-install�. Je l'ai supprim� et install� (mode recommand�) Oxygen. Au
-red�marrage, le boot manager de Be appara�t et il est impossible de
-d�marrer Linux.
-Pourquoi ne pas installer LILO si on supprime toutes les partitions ?
-
-(?)initrd in bzip2
-
-(?)smaller zsh (or ash in initrd)
-
-(?)is configureNetworkNet needed with dhcp/bootp?
-
-(?)bug in upgrade: install from hda1:/usr/local/blah with hda1:/
-
-(?)mandrake_desk was not installed while kdebase it there on upgrade
-
-(?)when clicking on X configuration, installation of packages is not displayed
-
-(?)maybe remove commented lines in /usr/lib/perl5/... files
-
-(?)timezone using a picture (pb: how to delimit zones)
-when asking GMT or not, display the time for each possibility
-the list is too big for USA
-
-(?)ability to select the type of install when booting of cdrom
-(?)use the ability of el torito to handle 2.88MB or more 
-
-(obsolete)lilo-deinstallation in case of lilo auto-installation for beginners
-
-(?)loadFont sucks
-
-(obsolete)trash on the screen when X first starts
-
-(?)remove the gray line surrounding the logo
-
-(?)cleanup /etc/services & /etc/protocols
-
-(?)strange: no scsi of type 'fd', only 'tape'
-
-(?)remount ro before X test.
-
-(?)remove every << and >> (doesn't handle > 32bits)
-
-
--done---------------------------------------------------------------------------------
-(7.1,done,fpons) improve printerdrake to at least have the same functionalities as printtool.
-
-(done,fpons)diskdrake can olverlap partitions (resize lower, resize original typically
-after clear all and auto allocate, try maximal size available).
-
-(done,fpons)rewrite mouseconfig in perl?
-
-(done,pix)kudzu or not in miscellaneous
-
-(done,pix)warn the user if not enough ram to fulfill install
-
-(done,fpons)test after printer config
-
-(done,pix)ask for more than the memory size detected
-
-(done,fpons)modem config
-
-(done,pix)call kudzu in batch to initialize its list
-
-(done,pix)standalone generator of mdkinst_stage2.gz
-
-(done,pix)text install
-
-(done,pix) if u choose mouse usb != found mouse, it fails at X config
-
-(done,pix) diskdrake bug: saved information on floppy contains isMounted.
-
-(done,pix) update devices.c from modules.pm
-
-(done,pix) in lilo.conf, put 
-disk=/dev/hdb
-  bios=0x80
-
-(done,pix) diskdrake
-auto_partitions
-suggested partition tables must be better foreach installClass
-
-(done,pix) update the list of modules (in update_kernel)
-
-(done,pix) language support: only choose the right locales and upmark the packages requiring it
-
-(done,pix) move security question before isntallation of packages
-
-(done,pix) install ssh
-
-(done,fpons,pix) change the boot message of syslinux (have something different from RedHat)
-
-(done,pix) install_steps.pm: 569 (128M + 3)
-
-(done,pix) bug: mouse freeze just before network configuration (mouse primax)
-  (was kudzu)
-
-(done,pix) signal 11 in stage1 nfs kickstart mount failed
-
-(done,pix) ask supermount or not, no supermount with kernel-secure
-
-(done,pix) fix bug in g_auto_install (can't go through all)
-
-(done,pix) bug: install from ciril.fr fails
-
-(done,pix)wizard for partitioning in case of one full vfat
-
-(done,dindinx)app for choosing drakxtools (drakxconf)
-(done,pix)verify being root
-(done,pix)log::l -> initlog
-
-(done,pix)install apmd for laptops (maybe not start apmd though)
-(done,pix)icewm apm (sh icewm_apm)
-(done,pix)kde apm (put Kapm.kdelnk in ~/Desktop/Autostart)
-
-(done,pix)bug in adduserdrake: missing pwconv in md5
-(done,pix)correct the default value of draksec (cp draksec)
-(done,pix)in draksec, (and maybe others) have --expert as default if /etc/sysconfig/system has TYPE=expert
-
-(done,pix)bug in XFdrake in install, cancel in choose Card do not close the window
-
-(done,pix)in XFdrake, testing should not overwrite /etc/X11/XF86Config
-
-(done,pix) hwiz and supermount and eject :(
-
-(done(replaced by msec's),pix) bug: usermod -G urpmi a not done (full install)
-
-(done,pix)perl and .ph's
-
-(done,pix) BUG bootp in network install sigsegv
-
-(done,pix) move the last done stuff before Xconfiguration if possible
-
-(done,pix)draksec is buggy, don't try security >= 4
-
-(done,pix)install apmd on laptops?? (maybe ask emcweb@btinernet.com (see alix))
-
-(done,pix)missing alias ll for root
-
-(done,pix)urpmi.addmedia:  |gzip instead of doing it afterwards
-
-(done,pix)locale (and fonts?) buggy in case ramdisk is used
-
-(done,pix)rpmdrake: Installed packages not in hdlist should be there
-
-(done)in ftp install, locale not installed properly
-
-(done,pix)pcmcia.img does not handle hd/cdrom
-
-(done,pix)cyrillic font buggy in DrakX
-
-(done,fred)remove xfs user from kdm
-
-(done,pix)bug with 2 cdrom drives (.kdelnk to there for 1st drive)
-
-(done,pix(works))test ramdisk stage2 and romanian
-
-(done,pix)kfmrc
-
-(done,pix)on laptop, default to 1024x768
-
-(done,pix)mkinitrd and deps
-
-(done,fred(removed the call))XFdrake and mousedrake freeze if lothar launches them
-
-(done,pix)crypto message
-
-(done,pix)test bug with lilo and windows (if not on mbr)
-
-(done,pix)removed icons come back later (kde desktop)
-
-(done,pix(was bug in upgrade reading old config))
-  segfault in linuxconf (adapter 1 empty)
-  (test with the sysconfig sent)
-
-(done,fpons)bug: Lrosqu'on effectue une mise � jour et que /etc/lilo.conf
-contient la variable � default � positionn�e sur autre chose que
-� linux � ou � windows �, DrakX est incapable de g�n�rer LILO.
-
-(done,fpons)bug: GeForce and hd.img?
-
-(done,fpons)for upgrade in expert, give choice of packages to install
-   choosing packages available in upgrade?
-
-(done,pix)rpmdrake: pb uninstalling package with dependencies (rpmdrake is killed?!) (as root too)
-
-(done,pix)noatime option for ext2 fs on laptops (do not wake up the hd)
-       Do  not  update  inode  access times on this
-       file system (e.g, for faster access  on  the
-       news spool to speed up news servers).
-
-(done,pix)kde's icons: 28 horiz and 25 vert grid for big icons
-
-(done,pix)bug: DrakConf don't follow the charset -> add setlocale(LC_ALL, "")
-(done,pix)for ko|ja|zh, gnome-terminal should point to rxvt (-CLE)
-(done,pix)group cdrom in /etc/group (gid=22)
-(done,pix)drakxtools should require urpmi
-(done,pix)bug: gdm unset LANG
-(done,pix) zip with automount -> ppa not autoloaded
-(done,pix)when you set the kde icons to Large, maybe it'd be good to chown the .kderc
-(done,pix)lilo in russian/japaneese is horrible
-(ok,pix)test ide burners
-(ok)test check bad blocks optional for mke2fs
-(done,pix)hd install: no umount is done at the end of install :(
-
-just before release:
-(done,pix)- mandrake_doc-xx, the symlink is no good in /usr/doc/mandrake as 
-(done,pix)- crypto dependencies to update
-(done,pix)- update kudzu's pcitable
-(done,pix)- update pcitable for 86C368 if 3.3.6 (and other S3 3D's)
-            ("ATI|3D Rage P/M Mobility AGP 2x" -> changed to Server:Mach64)
-
-(done,pix)with 2MB of video ram, chooses 8bpp instead of 16bpp
-
-(done,pix) replace
-	{ device => "loop7", type => 0x83, size => ((cat_('/dos/lnx4win/size.txt'))[0]*2048), mntpoint => "/", isFormatted => 1, isMounted => 1 },
-by
-	{ device => "loop7", type => 0x83, size => cat_('/dos/lnx4win/size.txt') * 2048, mntpoint => "/", isFormatted => 1, isMounted => 1 },
-
-(done,fpons)in ftp install, bug with X server install with wu-ftpd 2.6 (see http://www.wu-ftpd.org/broken-clients.html)
-
-(done,pix)ask package installation languages (must be put in RPM_INSTALL_LANG)
-
-(done,pix)bug (by dadou): Si la partition racine est trop petite pour installer le syst�me, un
-message d'erreur appara�t pour signaler le probl�me (bien) mais on ne
-peut en sortir. La seule solution est de red�marrer.
-
-(obsolete)bug when selecting compssUsers, do not deselect after (if u deselect)
-
-(done,pix)detect ide burners and then add hdX=ide-scsi to kernel cmdline
-
-(done,pix)urpmi: handle many args on cmd-line
-
-(done,pix)fix any // in path to ftp server otherwise windobe server bug :(
-
-(done,pix)diskdrake and auto partitioning, may have the last creation of partition rejected,
-try to figure why?
-
-(done,pix)in chooseResolutions: display the graphic card found
-
-(done,pix)with pcmcia, need ONBOOT=no
-
-(fpons,done) XFree: handle by card options
-eg: SIS6326 needs "no_bitblt" "no_bltimage" and 24bpp instead of 32bpp
-
-(done,pix) Xconfiguration: if "can't open fixed font", relaunch xfs.
-
-(obsolete) pb with dependencies ``missing'': icewm do not require XFree86 and so you can have icewm but no X server
-
-(obsolete) bug in ext2resizing (no sparse superbloc, don't finish properly)
-
-(done,pix,7.1)manage a lot of language (ergonomic issue as it already exists)
-
-(done,pix,7.1)tree for choosing things like timezone, monitors, graphic cards, modules, mice, keyboard? ...
-
-(done,pix,7.1)sound config, although very simple, no dedicated steps and only PCI (or maybe ISA-PNP if time left ?)
-
-(done,pix,7.1)partitioning, keyboard shortcut.
-
-(done,fpons,7.1)index/compress hdlist? (for multi-cd)
-! for multi-cd live is mandatory, small transaction are mandatory too.
-
-(done,pix,7.1?)loopback partitions (even root one)
-
-(done,pix)in ok_cancel, focus has 3 states, should be 2 (ask dindinx)
-
-(done,pix,7.1)Generally improved package selection /ergonmic issue.
-Tree -> CTree, ``all'' branch with all packages
-show the value associated (100->a must, 90->great, 80->nice, ... 10->useless, 0->do not install)
-
-(done,pix)let diskdrake have dos/win partition automatically set up with mount point,
-this will help loopback too.
-
-(done,pix,7.1)grub
-
-(done,pix,7.1)feature missing: cancel installation
-
-(obsolete) bug in diskdrake: can in strange cases create a primary partition at sector #0
-
-(done,pix(partly, protection against bugging))bug in diskdrake:
-in expert: blank, create hda5 at beginning, create hda6 at the end, create hda7
-in the middle, remove the first one. Result hda5 at the end and bug.
-
-(obsolete) have a better time estimation of the remaining time in install packages
-
-(done,dindinx+pix)ask_many_from_list can't keyboard scroll
-
-(done,pix,7.1)individual package selection: double click is tiring...
-
-(done,fpons,7.1) sparc ehancement, avoid V7+ machine target (div and mul not in v7 standard)
-
-(done,fpons,7.1)syslinux in graphical mode to be improved for heavily bogus BIOSes.
-
-(done,pix)missing feature in lilo configuration: can't give hda2 with /boot/vmlinuz if
-already hda1 with /boot/vmlinuz
-
-(done,pix)in 640x480 install box is to small (cuz of 'Cancel' button beeing added)
-
-(done,pix)chooseGroup with individual alone
-
-(done)(7.1) rewrite crypto stuff
-(done)crypto: add a cancel & progress bar while downloading
-(done)error handling (like reading hdlist)
-(done)(7.1)progression bar on crypto.
-
-(done, daouda&pix,7.1, other persons)rescue: 
-- small modification for stage1 to get the rescue stage2
-- create a stage2 with many tools (fdisk, bash...)
-the rescue could be on another cd (if multi-cd)
-! care must be taken about modules (if ide is in module...)
-
-(done,7.1)install in 800x600
-- need handling of both 640x480 (mostly for VGA16) and 800x600
-
-(done,NEED 7.1) auto-install for corporate, very important (need consolidation).
diff --git a/docs/advocacy b/docs/advocacy
deleted file mode 100644
index 9e7f00b6b..000000000
--- a/docs/advocacy
+++ /dev/null
@@ -1,87 +0,0 @@
-a little DrakX history:
-
-june 1999: 
-  i start rewriting redhat's install in perl, partly for the fun of it. I'm
-  still working for the army
-
-5 july 1999: 
-  i start full time job at mandrakesoft. But we don't have many computers and i
-  must share the accounting computer with Merieme who is working half-time. No
-  test machine (i test on others box, and destroyed Jacques partitions once),
-  guess how it slows things down?
-
-august 1999: 
-  at last computers, even test one
-  first DrakX version which can install things, very very rough
-
-september 1999: 
-  a friend of mine help me 2 weeks on DrakX relayed by Francois
-
-november 1999:
-  first released version of DrakX (goldpack). Not really stable yet.
-
-january 2000:
-  7.0 is out, with a DrakX quite stable
-
-july 2000: 
-  dams starts working on draknet
-
-mid-october -> mid-january 2000: 
-  gc rewrites the stage1 to win every kb we can 
-  -> size divided by 7 (!) for cdrom
-
-
-The DrakX team is also doing a lot of other things:
-- drakxtools
-- urpmi, early MandrakeUpdate, early rpmdrake...
-- Mandrake Control Center (new DrakConf)
-- packages maintenance/enhancing (esp. ghostscript, 3D-wrappers, lilo)
-- fixing core packages to make them installable
-- scoring packages, sorting them, flagging them... (compssList, rpmsrate)
-- reading/answering cooker and other MLs
-- helping non-perl gurus :)
-
-That doesn't give much. Me being the one more working on plain DrakX. It gives 2
-people working for 1.5 years. IMO it isn't ``spending an enormous amount of
-resources''.
-And what do you mean by ``compared to the code base size''??? DrakX is currently
-around 28K lines, which is big IMO. You can compare it with linuxconf which is
-170K lines. I think the achievement of DrakX is comparable (a 6 times code size
-win from dumb C++ to expressive perl is normal imo).
-
-
-Also it seems like we don't have the same understanding of the word
-"maintenance".
-DrakX functionalities have evolved *a lot* since the beginning:
-
-- hardware detection, configuration, debugging, work-arounding (multi-kernel installs...)
-- making things prettier
-  - more bitmaps
-  - "advanced" button
-  - syslinux graphical boot
-- making it work with latest versions of software (eg: switching to rpm4)
-- finding out the best way to use rpmlib
-- multi-cd
-- draknet: configuring every piece of stupid protocols
-- diskdrake: raid, loopback, LVM, resizing, checking stupid users entry
-- XFdrake: multi-mice, multi-heads, 3D-accel
-- porting to axp/sparc/ppc (with Stew's help)
-- always more i18n
-- keeping things small
-  - .cz format
-  - moving to .png
-  - getFile on demand from mdkinst for ramdisk installs
-
-[...]
-
-> You don't believe the books ? Count yourself; see the man/months spent
-> in 'pure' developoment in drakX, and the resources put in mantainance
-> of the code base; as far as i know, your count should confirm what the
-> books says; more probabily, you will discover that our numbers are
-> even worse.
-
-if you count enhancements, adding features... in maintenance, i confirm the
-numbers, and find them quite normal.
-
-if you only count bug fixing, the time would be much shorter (around 30%).
-
diff --git a/docs/advocacy-interactive b/docs/advocacy-interactive
deleted file mode 100644
index 99036008e..000000000
--- a/docs/advocacy-interactive
+++ /dev/null
@@ -1,60 +0,0 @@
-
-> > We already have some functional backends, frontends, that works great, and has
-> > not been thrown away since 1 year. We use it during install, post install, mcc
-> > and so.
-> 
-> But aren't generic enough.
-
-DrakX handles:
-- buttons
-- bool values (checkboxes)
-- ranges
-- entries
-- combo boxes (editable or not)
-- lists / radio boxes
-- tree lists
-- iconlist
-- wait messages
-
-Features:
-- all the entries above can be mixed
-- nice separation between data and displayed data (eg: choose in list of
-objects representing hda/hdb/... but displayed nicely with size...)
-- keyboard handled nicely in GTK frontend
-- callback on events:
- ok pressed => check before the dialog is hidden
- focus changed => 
-  * enables pre-setting things based on other entries
-  * value checking on the fly
-- simple/advance toggle 
-- shadowing of entries
-- tooltips
-- size of windows computed the best possible
-- perl-based
-
-Misfeatures:
-- display not flexible (though i don't know any of the tools we're talking
-about that is flexible => nice)
-- quite a few features are gtk only (simple/advance toggle, shadowing of
-entries, certain events, tooltips).
-- a stdio front-end exist but handle only certain entries. It would need a
-week-work to finish it
-- a http front-end could be done (mod-perl needed)
-- perl-based
-
-The DrakX frontend (called "interactive") could be moved out of DrakX.
-
-eg of use:
-
-<#part type="text/plain" filename="~/bin/perl/imessage" disposition=attachment>
-<#/part>
-
-[...]
-
-> > -provides a lot of frontends
-> 
-> And you ideally have to provide a frontend by widget set.
-
-nope. The interface is completly standardised, even if it include some
-gtk-like niceties. The *complete* newt (and not just entries and radioboxes
-like bus) binding takes 241 lines.
diff --git a/docs/comparisons b/docs/comparisons
deleted file mode 100644
index 716efd938..000000000
--- a/docs/comparisons
+++ /dev/null
@@ -1,91 +0,0 @@
-redhat 6.1 (fr?), install 766MB, df 900MB, 35min (asked for all groups except "everything")
-
-upgrade to redhat 6.2, sum 757MB, df 936MB, 20min
-
-mandrake 7.1, install 755MB, df 1091MB, 17min (asked install size 910MB), 515 packages
-
-upgrade to cooker, sum 1000MB, df 1404MB, 35min
-
-
-redhat 7.0b, install 815MB, df 960MB, 18min
-redhat 7.0, install 995MB, df MB, 26min
-
-7.2b, 3.3GB 2h26
-
-
-7.2b: (lang fr)
-compssLevel  df  rpm  	time  fs          df/time
-	               	     
-100          64   59  	0:59  ext2 500M   1.08
- 90         132  127  	1:50  ext2 500M   1.20
- 80         226  218  	3:26  ext2 500M	  1.10
- 70         449  387  	5:52  ext2 1G	  1.28
- 60         614  541  	8:36  ext2 1G	  1.19
- 50        1113  943   17:40  ext2 2G	  1.05
- 40        1193 1013   20:39  ext2 2G	  0.96
- 30        1262 1072   22:28  ext2 2G	  0.94
- 20        1445 1219   27:34  ext2 2G	  0.87
- 10        1649 1394   36:58  ext2 2G	  0.74
-  0        1943 1638   48:02  ext2 2G	  0.67
--10        2957 2519  101:49  ext2 4G 	  0.48
-
-7.2b: (lang all)
-compssLevel  df  rpm  	time  fs          df/time
-
-100          70   59  	1:04  ext2 500M   1.09
- 90         289  281  	4:20  ext2 500M	  1.11
- 80         373  361    5:41  ext2 500M	  1.09
- 70         890  794   13:28  ext2 1G	  1.10
-
-
-mem used 7.2cooker
-gtk:   runinstall2 13608(data 9572) + FBDev 2984(data 1544)
-newt:  runinstall2  9516(data 7528)
-stdio: runinstall2  9160(data 7372)
-
-8.0rc1: (lang fr)
-
-rpmsrate
-
-4   ()        175   139    3:25   reiserfs 2G  0.85
-4   all       831   786   18:08   reiserfs 2G  0.76
-
-8.1b
-
-5   ()         77    66    1:24   ext2 300M
-
-8.1pre_rc1     rpm   df                       time/rpm  rpm/df
-
-6   ()         82    66    1:26   ext2 500M   1.05      1.24
-5   ()         89    71    1:38   ext2 500M   1.10	1.25
-3   ()         94    77    1:46   ext2 500M   1.13	1.22
-5   X         145   127    2:09   ext2 500M   0.89	1.14
-3   X         231   217    3:26   ext2 500M   0.89	1.06
-4   kde       393   316    4:31   ext2 2G     0.69	1.24
-4   kde       393   316    4:41   ext2 2G     0.72	1.24
-4   kde       393   316    4:43   ext2 4G     0.72	1.24
-5   all       367   337    5:02   ext2 500M   0.82	1.09
-4   kde+gnome 454   370    5:50   ext2 4G     0.77	1.23
-4   kde+gnome 454   370    6:10   ext2 4G     0.81	1.23
-4   kde+gnome 454   370    6:24   ext2 4G     0.85	1.23
-5   all       489   406    5:55   ext2 4G     0.73	1.20
-5   all       490   406    5:18   ext2 1G     0.65	1.21
-4   kd+gn+dsk 594   494    7:31   ext2 4G     0.76	1.20
-4   prev+dev  827   696   10:27   ext2 4G     0.76	1.19
-4   all      1100   988   19:34   ext2 1G     1.07	1.11
-3   all      1640  1331   31:33   ext2 2G     1.15	1.23
-3   all      1740  1434   39:38   ext2 4G     1.37	1.21
-2   all      2252  1843   54:40   ext2 4G     1.46	1.22
--1  all      2490  2048   61:02   ext2 4G     1.47      1.22
-
-# perl -alpe '$F[4] =~ /(.*):(.*)/; $r = ($1 * 60 + $2) / $F[2]; s|\S+(\s+\S+)\s*$|sprintf("%.2f", $r) . "$1"|e;'
-# perl -ape '$r = $F[2] / $F[3]; s|\S+\s*$|sprintf "%.2f\n", $r|e;'
-
-
-redhat 7.3:
-- do not halt the box when "halt" is used
-- no sysreq
-- kdm has gnome entry whereas gnome is not installed
-  => choosing gnome gives a flashing black screen and kdm reruns
-
-- repartition of packages on various CDs is crap
diff --git a/docs/diskdrake.TODO b/docs/diskdrake.TODO
deleted file mode 100644
index e6f2da038..000000000
--- a/docs/diskdrake.TODO
+++ /dev/null
@@ -1,23 +0,0 @@
-- test what windows can handle (the number of partitions)
-- better keyboard focus handling
-- end sector in Create
-- add warnings for scsi drives if you create more than sdx15
-- the information put in save/restore partitions must be cleaned
-(remove mounted/formatted/..., also remove the Data::Dumper dependency)
-- test, test, test
-- do not allow swap partitions above 2Gigs
-- wanting the first partition to be extended is not used
-- maybe warn if a mounted partition change of dev number
-- text version
-- better error handling (what to do if we find a bad partition table?)
-- display the information about the correspondance color2type
-- handle the partition labels (missing information here)
-- add comments in the code
-- add documentation
-- handle the `luke' case (main extended partition must be extended)
-- ability to batch actions (like chained moves)
-- add a verification after fdiskReadPartitionTable that the start_cyl,
-end_cyl... do correspond to start and start+size. For the moment, this
-information is just discarded :(
-This verif can't be done in fdiskReadPartitionTable as start is relative in
-extended partitions
diff --git a/docs/drakfont/Makefile b/docs/drakfont/Makefile
deleted file mode 100644
index b70b4a0c8..000000000
--- a/docs/drakfont/Makefile
+++ /dev/null
@@ -1,57 +0,0 @@
-#
-#
-#        Project   : Projet  Libre
-#        file      : pki.tex
-#             Date : Thu Jun 21 19:26:19 CEST 2001
-#   (o-       Id   : DUPONT Sebastien
-#   /\        mail : <dupont_s@epita.fr>
-#  Y_/___________________________________________
-#
-
-RM 	= 	@rm -f
-
-CD	=	@cd
-
-ECHO	=	@echo
-
-PRINTF	=	@echo -n
-
-FILE	=	drakfont
-
-DVI	= 	@dvips -j0 -Pcmz -Pamz -o
-
-PS	=	@ps2pdf
-
-LATEX	=	@latex
-
-normal	:
-	$(ECHO) '/*--LATEX--*/'
-	$(LATEX) $(FILE).tex
-
-all	: 
-	$(ECHO) '/*----------latex -> dvi -> ps -> pdf------------'
-	$(ECHO) '/*--LATEX--*/'
-	$(LATEX) $(FILE).tex
-	$(ECHO) '/*--DVI -> PS--*/'
-	$(DVI) $(FILE).ps $(FILE).dvi
-	$(ECHO) '/*--PS -> PDF--*/'
-	$(PS) $(FILE).ps
-	$(ECHO) '/*--That s all--*/'
-
-
-ps	: normal
-	$(ECHO) '/*--DVI -> PS--*/'
-	$(DVI) $(FILE).ps $(FILE).dvi
-	$(ECHO) '/*--That s all--*/'
-
-pdf	: ps
-	$(ECHO) '/*--PS -> PDF--*/'
-	$(PS) $(FILE).ps
-	$(ECHO) '/*--That s all--*/'
-
-clean	:
-	$(RM) $(FILE).toc $(FILE).log $(FILE).aux *~
-
-fclean	:
-	make clean
-	$(RM) $(FILE).ps $(FILE).pdf  $(FILE).dvi  
diff --git a/docs/drakfont/dia_srcs/drakfont.dia b/docs/drakfont/dia_srcs/drakfont.dia
deleted file mode 100644
index c4502a12e..000000000
--- a/docs/drakfont/dia_srcs/drakfont.dia
+++ /dev/null
diff --git a/docs/drakfont/dia_srcs/drakfont_install.dia b/docs/drakfont/dia_srcs/drakfont_install.dia
deleted file mode 100644
index 737c19b9f..000000000
--- a/docs/drakfont/dia_srcs/drakfont_install.dia
+++ /dev/null
diff --git a/docs/drakfont/dia_srcs/drakfont_uninstall.dia b/docs/drakfont/dia_srcs/drakfont_uninstall.dia
deleted file mode 100644
index c06f92dd6..000000000
--- a/docs/drakfont/dia_srcs/drakfont_uninstall.dia
+++ /dev/null
diff --git a/docs/drakfont/drakfont.jpg b/docs/drakfont/drakfont.jpg
deleted file mode 100644
index 898dfe440..000000000
--- a/docs/drakfont/drakfont.jpg
+++ /dev/null
diff --git a/docs/drakfont/drakfont.tex b/docs/drakfont/drakfont.tex
deleted file mode 100644
index bbc936e5b..000000000
--- a/docs/drakfont/drakfont.tex
+++ /dev/null
@@ -1,152 +0,0 @@
-%\documentclass[pdftex]{article} \usepackage{hyperref} . 
-%\documentclass[pdftex,onecolumn,11pt,oneside]{article}
-\documentclass[onecolumn,11pt,oneside]{article}%seminar}
-%\usepackage[pdftex]{hyperref}
-\usepackage{isolatin1}
-%\ifx\pdfoutput\undefined
-
-\usepackage[dvips]{graphicx}
-%\else
-%\usepackage[pdftex]{graphicx}
-%\usepackage[pdftex]{hyperref}
-%\usepackage{type1cm} 
-%\fi
-%\pdfoutput=1 
-\usepackage{color,graphicx,shortvrb,epsfig,verbatim,tabularx}
-\usepackage{url}
-\usepackage{hyperref}
-\urlstyle{sf}
-\usepackage{fancyheadings}
-\usepackage{program}
-\usepackage{ulem}
-\usepackage{amsfonts}
-\usepackage{xspace}
-\usepackage[english,francais]{babel}
-\pagestyle{fancy}
-\newcommand{\trtitle}{Drakfont\\ fonts importation for mandrake linux}
-\DeclareGraphicsRule{.ps}{eps}{.ps}{}
-\DeclareGraphicsExtensions{.ps}
-\renewcommand\star{{\ttfamily*}}
-\let\package\textsf
-\newlength{\gxlen}
-\settowidth{\gxlen}{\package{graphicx}: }
-\newcommand\gs{\makebox[\gxlen][l]{\package{graphics}:}}
-\newcommand\gx{\makebox[\gxlen][l]{\package{graphicx}:}}
-\MakeShortVerb{\|}
-\begin{document}
-\title{$Drakfont$ fonts importation for mandrake linux}
-
-\begin{figure}%[ht]
-\begin{center}
-%\caption{Exemple d'image}
-\mbox{\epsfig{file=mandrake.ps}}\\ %,height=1in,width=2in}}\\
-%\mbox{\epsfig{file=carte_.ps,height=1in,width=2in}}
-\end{center}
-\end{figure}
-%\begin{figure}
-%\begin{center}
-
-%\end{center}
-%\end{figure}
-\author{Dupont Sebastien \\ sdupont@mandrakesoft.com}
-\date{05/10/2001}
-\pagestyle{myheadings}
-\markright{\scriptsize \trtitle}
-\title{\bf \trtitle}
-\maketitle
-\section{drakfont Future Overview}
-
-\paragraph{Fonts import :\\}     
-\begin{itemize} 
-\item pfb ( Adobe Type 1 binary )
-\item pfa ( Adobe Type 1 ASCII )
-\item ttf ( True-Type  )    
-\item pcf.gz		      
-\item Speedo		      
-\item pfa ( Adobe Type 1 ASCII )
-\item ttf ( True-Type  )    
-\item and Bitmap (PCF, BDF, and SNF)
-\end{itemize}
-
-
-\paragraph{Features}                
-\begin{itemize} 
-\item Install fonts from any directory
-\item Get windows fonts on any vfat partitions
-\item UN-installation of any fonts (even if not installed through drakfont)                
-\end{itemize}
-
-
-\paragraph{Support}                
-\begin{itemize} 
-\item Xfs		      
-\item ghostscript \& printer 
-\item Staroffice \& printer  
-\item abiword		      
-\item Koffice, Gnumeric, ... studying
-\item all fonts supported by printer
-\item ( aliases by RENDER in Xfree86 .... -> later )
-\end{itemize}
-
-
-\section{Window interface:}
-\begin{itemize} 
-\item
-\item Fontselectiondialog widget
-\item Command buttons under Fontselectiondialog (like the actual frontend).
-\item Commands buttons:	      
-\item import from windows partition.
-\item import from all fat32 partitions and look for winnt/windows/font
-\item and import all (delete doublon) but don't import if already exist.
-\item import from directory     
-\item look for if it exist before for each font and not delete the original.
-\item (replace all, no, none)
-\item expert options:	      
-\item ask the directory, and look for if it exist before
-\item if it exist ask: (replace all, no, none)
-\item uninstall with list per font type
-\item Expert additional switch
-\item option support:   ghostscript, Staroffice, etc...
-\item check-button. (by default all check)
-\item Printer Application Fonts Support...
-\item check-button. (by default all check)
-\end{itemize}
-
-\section{Command line}
-\paragraph{Font Importation and monitoring application\\}
-\-\-windows\_import : import from all available windows partitions. \\
-\-\-strong         : strong verification of font.\\
-\-\-install        : accept any font file and any directory.\\
-\-\-uninstall      : uninstall any font or any directory of font.\\
-\-\-replace        : replace all font if already exist\\
-\-\-application    : 0 none application.\\
-                 : 1 all application available supported.\\
-                 : name\_of\_application" like  staroffice for only this one.\\
-				      
-\section{Graphics}
-
-to visualize the conceptual graphics please see:\\
-drakfont.jpg\\
-drakfont\_install\.jpg\\
-\& drakfont\_uninstall.jpg\\
-
-
-
-%\begin{figure}%[ht]
-%\begin{center}
-%\caption{Exemple d'image}
-%\mbox{\epsfig{file=drakfont_install.ps}}\\ %,height=1in,width=2in}}\\
-%\mbox{\epsfig{file=carte_.ps,height=1in,width=2in}}
-%\end{center}
-%\end{figure}
-
-
-%\begin{figure}%[ht]
-%\begin{center}
-%\caption{Exemple d'image}
-%\mbox{\epsfig{file=drakfont_uninstall.eps}}\\ %,height=1in,width=2in}}\\
-%\mbox{\epsfig{file=carte_.ps,height=1in,width=2in}}
-%\end{center}
-%\end{figure}
-
-\end{document}
diff --git a/docs/drakfont/drakfont_install.jpg b/docs/drakfont/drakfont_install.jpg
deleted file mode 100644
index 795a5a711..000000000
--- a/docs/drakfont/drakfont_install.jpg
+++ /dev/null
diff --git a/docs/drakfont/drakfont_uninstall.jpg b/docs/drakfont/drakfont_uninstall.jpg
deleted file mode 100644
index 711f28e77..000000000
--- a/docs/drakfont/drakfont_uninstall.jpg
+++ /dev/null
diff --git a/docs/drakfont/mandrake.ps b/docs/drakfont/mandrake.ps
deleted file mode 100644
index 1af9d5bb4..000000000
--- a/docs/drakfont/mandrake.ps
+++ /dev/null
@@ -1,534 +0,0 @@
-%!PS-Adobe-3.0
-%%Creator: GIMP PostScript file plugin V 1.12 by Peter Kirchgessner
-%%Title: /home/seb/drakfont/mandrake.ps
-%%CreationDate: Fri Oct  5 18:28:29 2001
-%%DocumentData: Clean7Bit
-%%LanguageLevel: 2
-%%Pages: 1
-%%BoundingBox: 14 14 424 84
-%%EndComments
-%%BeginProlog
-% Use own dictionary to avoid conflicts
-10 dict begin
-%%EndProlog
-%%Page: 1 1
-% Translate for offset
-14.173228 14.173228 translate
-% Translate to begin of first scanline
-0.000000 69.000000 translate
-409.000000 -69.000000 scale
-% Image geometry
-409 69 8
-% Transformation matrix
-[ 409 0 0 69 0 0 ]
-% Strings to hold RGB-samples per scanline
-/rstr 409 string def
-/gstr 409 string def
-/bstr 409 string def
-{currentfile /ASCII85Decode filter /RunLengthDecode filter rstr readstring pop}
-{currentfile /ASCII85Decode filter /RunLengthDecode filter gstr readstring pop}
-{currentfile /ASCII85Decode filter /RunLengthDecode filter bstr readstring pop}
-true 3
-%%BeginData:        29637 ASCII Bytes
-colorimage
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-bl7e@q"4E6s+13Ds*t~>
-bl7e@m,@els+13Ds*t~>
-bl7e@T5=@Ts+13Ds*t~>
-c2RqDnG2D<JcC<$U&TW~>
-c2RqDl/9_PJcC<$U&TW~>
-c2RqD]71%QJcC<$U&TW~>
-cMn+JnG;n/i;S<-JcDJEJ,~>
-cMn+JmbuTmh#;m)JcDJEJ,~>
-cMn+Jie^A<a8UYiJcDJEJ,~>
-cMn+DnbMk)f)($uJcDJEJ,~>
-cMn+DjkIhQchi:nJcDJEJ,~>
-cMn+DST5n_V>GiDJcDJEJ,~>
-ci47Jn+l_KeBdl?s+13Es*t~>
-ci47Jkhjh)WP\C\s+13Es*t~>
-ci47J^4K&h%!hSus+13Es*t~>
-d/OCNnbW%Rn_2+VJcC<$UAo`~>
-d/OCNn);p@^TP0>JcC<$UAo`~>
-d/OCNj+q1n%LcV6JcC<$UAo`~>
-d/OCHnG2eMo&%LUJcC<$UAo`~>
-d/OCHjkS+u^p135JcC<$UAo`~>
-d/OCHTl`:/%Lk8_JcC<$UAo`~>
-lMgqbp\sLY$2s;fp\"1NjN$P:s+13Es*t~>
-lMgqbp\sLY$2s,He&K8A[BAeGs+13Es*t~>
-lMgqbq>T^[$2r)%;B-/V%3+S`s+13Es*t~>
-li.(dk/mMerri>mqY9a_oE+4!k(3P`s.]OD~>
-li.(dk/mMersJbqin;Gk_SWgdk(3P`s.]OD~>
-li.(dmFhC'rsJbkMeO[R%M'!Pk(3P`s.]OD~>
-m/I4fjeV8=m/I1an+l\UoE4C(gAQU&JcDMFJ,~>
-m/I4fje_>>m/I4bjk\5#rk\cKUso9ns+13Fs*t~>
-m/I4flbMl_m/IIiWH^N?%Ls!Y%&s2Vs+13Fs*t~>
-mJd@ggl^4WrU'UfrU9RVp&4Lbm*a;WJcC<$U]5i~>
-mJd@gglg:XrU'UfrTiCk`r3aV];N^FJcC<$U]5i~>
-mJd@gjg<_0rU'UfrR6L%+8lZO%1J$fJcC<$U]5i~>
-mf*Iik)["5qX+:crq-'^p&+Famb#_TJcC<$U]5i~>
-mf*Iik)d(6qX+:drq#.'b/=1p"21eLoR[$ns.fUE~>
-mf*IilEnChqX+:drp>Y\/e\'l!Xrf8JcC<$U]5i~>
-n,F"!nYD2sp&>!hp%nOYp@\.TrV6BpqX41Qqt(!\hT52;s+13Fs*t~>
-n,F"!nYM8tp&>!hm-F!$l0Rm2rV6BqqW?VZ`;IIS^p(69JcC<$U]5i~>
-n,F"!o>7BVp&>!h[uQH0T!cSkrV6BqqQkK3(&JIB%70K7s+13Fs*t~>
-n,FI)^NR3SrVuomhY$U:q"X[\qY0^VpA+[ds82B`p\"CT!oq>fJcC<$U]5i~>
-n,FI)^j!BUrVuomg;hIdf%Jg6kNM-qn+?PWs82-AeAqF&!jo2uJcC<$U]5i~>
-n,FI)d@e5>rVuom_BM'9>A8)$G_hZm`nC%as80]m<Zq5K!Y$ODJcC<$U]5i~>
-nG`[jf8YC8q>UBuqVJd?m.L&NpAajeq#1!kp%eIZp%e4]kKW1@s+13Fs*t~>
-nG`[jf8YC8q>UC0qVJQ`]>_n8c-Xnhg"Y?>kiqElf#bi+_?.6OkCNYas.fUE~>
-nG`[jhm8^'q>UC0qVI;C%2gQM4%)eE@rZaAKVFlk?7QZc%Kd4N"m:I:JcDMFJ,~>
-nc&gmm]UN9m/I"a#6+8C]\r,HrUg-_rq??c!VZ3]oE4O8iVnE.JcDPGJ,~>
-nc&gmm]UQ:m/I"a(&mjRYd1mV_SX4/`lQ?JcdC7lcH*p!_?7KSh>W!*JcDPGJ,~>
-nc&gmnApp+m/I"a(&mjRCCL^_%M'-d*@NX&6:t6X5:%$?%Km:P%*&9ts+13Gs*t~>
-nc&dibD(8oq>C6srp\(Nj6cI(oE4^PjnOE,JcDPGJ,~>
-nc&dibD(;pq>C6srp\(:[(O6N_?7]o`5D>d"2VXrpjrHrs.o[F~>
-nc&dif<14fq>C6qrp\&r%J^M6%g3L](D78P%KT)pJcC<$V#Pr~>
-o)Apnm'1H"lMg\\#6!f&dH0iglLY2OnG*"XrsA\uq"XjgqtB^[JcC<$\c70~>
-o)ApnmBLT$lMg\\#6!f&\@0,fm(rqD`5^X+rqQL"rpo1Err;l[jSON.JcE:\J,~>
-o)Apnm`LrrlMg\\"T@T$+q<fI"VDOmC#f3frsA\WEU3W(qji66JcC<$\c70~>
-o)Amjb*?Map%eUlqr>9CjmVg,oEY'_p\"4Rr;QWo$2s&VmeZnNp>>Uqs+13\s*t~>
-o)Amjb*?Pbp%eUlqr>2i[_BTE_?e'"cIM%Anb`=`rsAYegtV](lHe5ZJcC<$\c70~>
-o)Amjf"$U`p%eUjqr=df%I4K1%hp3M>Ci]roD\[f$2s$mBDVSN(rc6#s+13\s*t~>
-o)Am`[;pHKrV6BrptE13kO@d/(%q:pq"X[Yp%\Lcs8M65p?qSEe(skOs+13\s*t~>
-o)Am`[W6TMrV6BrptE!V\A.@H(;n2:dFR%+k3DR:s8W)^b0fDEf>-5=JcC<$\c70~>
-o)Am`bFssSrV6BqptC`;%I4K?%hp-C8mQ7RKs0)+s8W)^Q8?5H>YX&NJcC<$\c70~>
-oD]!me>?o:lhCD`rq+[OhWjXqo`+Uap(-omq"aUUq=E"uo]5Yem/DS9JcE:\J,~>
-oD]!meYd,>lhCD`rq+[DZ+@a9_A'o,aNMlWf%T6KmIg(uccXqbaR&nWs+13\s*t~>
-oD]!mgr,DGlhCD_rq+ZT%1VS4'b:op,r7b[?>XPE\DZu+?7Vct]^5WKs+13\s*t~>
-oD]!f^6W?3nb2terp\+KipH=!o`+Uap($ilq"O+(guI)Go(DbUrdk*#s1JA^~>
-oD]!f^6`H5nb2terp\+:Zb4-;_@si+aNVuZf\>QHa2#=.eDfTZqu20HJcEC_J,~>
-oD]!fcFJk?nb2tcrp\*'%H\-7%h]a,2F:;PDg@Us1*L+oT;9Krrdk*#s1JA^~>
-oD]!]YCC#np\"OjrThAHk3qp%o_nFnp@?/4i8NJDeEQYKc-"5QrlP;YVY^&e!rCEmrQ58a`3ciI
-d/OCNp#k&U\;/o>h#@ZZp#k&V\rFr4iVs>cn`8KObf\)MdFe!gir92]puU2Tbl5cb^&\&$s*t~>
-oD]!]YCC#np\"OjrThA1\%]]>_A'o-aN2ZXdCHg.]=keag\&b7bKS30b6#MWqY1!kqUNslb6?&0
-`3ciId/OCNp#k&U\VT)@h#@ZZp#k&V]8k/7iVs>cn`8KObfe/NdFn'hir9DcpuU2Tbfe2P^V9T9
-s*t~>
-oD]!]aJt!3p\"OhrTh?P%H@p+%hp!3-mB]:J%7BArWNL]p"S9UgY;_]!n>*`p\t<kinaRe"PMAM
-b59Qc#laScjPJ7fjo4'8#laScjPS@lgAU"1%0#nbjk\\Fg=b?Co`!kM"oe>aj5&JhgAfS$qjmb;~>
-o`#-pfr/arg&(FA"oIDohWO@goFpf^hTE^[d+I+3\@B)hioYiBMk'a<!fM0fq#:d$hS6+`T:M*e
-C1Mkcdf0[Qg;:S9ZD;SVjSds8$N8Ym]Xb>FH>(\%jSoMbptsB7]<eK2rgs@hW2mGdrT4%`rTDG@
-ZDXGrT)saenX]]1~>
-o`#-pfr/asg&(FA"oIDmZ+.O/_@s_sYb@bpYJAE'\@B)hioYlDMk'a<!fM3gq#:d$hS?1aT:M*e
-C1Mnddf0[Qg;:V:ZD;SWjSds8$N8Ym]XkDGH>1b&jSoMbptsE9]<eK2rgs@hW3!MerT4%`rTDG@
-ZDXGrT)safnX]]1~>
-o`#-phSl(>g&(FA"T.;a%1V;,rs]MI#nAC@F#gb?\]3XkXJrM=rP&E>SaH4P%/o8;a1oC'[\K.H
-S+>#-$N9&:eC)RXUQ4F6hZ!r]j3uH'bep?>eGA8+#laY_hUg0!`PMPg"iA7"cKP5grs&Ggh:9`f
-_>_1NY+"mOs*t~>
-o`#-k`1LULi;W?J"o6r`jR)O$oH!MhhT2q%V6%_Zamms?io]goWKMCCDf9T7A7i^Wq>Uls_PM^#
-EG/W[H],6!df0[K[s3%5GACN#iVq^6$MV#aF)?#9>[lFajo6"lim#-6Ob7puCMe$3G'nq%P-t2M
-rseqc_lA`EF(f,p@pNR+qYpZso@s5Bs*t~>
-o`#-k`1U[Ni;W?J"o6r[[Cj?=_B$G(Yb-l2RA-dea2uK^io]goWfhOEDf9T7A7i^Wq>Uls_PM^#
-EG/W[H]5<"df0[K[s<.7GACN$iVq^6$MV&bFDc2;>[uLbjo6"lim#-6Ob7puCMe$3G'nq%PICAO
-rseqd_lA`EF(f,p@pNU,qYpZso@s5Bs*t~>
-o`#-kd(bp"i;W?J"8U`5%HJ$!%2'$U$Vu+1*4lc6i8Wnik-LYHT`1PdTU(S\rV?I%p=$pYT:h[3
-H]"0#n'_4CpW&ntT;8$8L>i-grsJMAUn"!NSr/*QqrRhkr9<%c`3ueET:MRGTqnTfZa\-TkPl"i
-kL[_[W1f]IQ'I8]k5,)[rq>LQW;hA~>
-o`#*d[?tH4iq!*Orq+U^kO]kem,#gfX.uc3c/-+Vg@4Y3s8V`JaII`jBOk^aA?5P&rseqYZA*4-
-An"tc][5[4df0XJgUa)+DIZpqkM?.FpYNZaKQL^.E9$r[rtYF__PW-/@pN2?>?b?@A7fLoF`b+j
-kl1kZ]qg0nA7#49!`N1[rVm*#m+]aaPkD!TJ,~>
-o`#*d[?tH5iq!*Qrq+UM_o(`U+2GLmT8\SmWkcK^ZHL,*n,E@eo\RZZIq35'An#;Pq>1+#rR\?0
-D.R<g>][R)iqLn$$2<2cTmU`f>^5GfrsJMW^Sup0@p<p4roX4qqq/c_LiHp1=B\p5>[_/TBQ/*:
-\,>Ii%J7B1J8/V$='/O*;cr&Xrs&Gggrugaor.n@~>
-o`#*daL[Uhiq!*Qrq+T=&eX=;rs]qU$49S'^m5IRb>Su4rr<#jhT2duQC+#+P`30KqYq$'hor9p
-R$j.jL:kmmpX9'JpY39ST:_@%Np#6u$MWDlWLorNKS\[fk5Q1nimu&PTTkChKS>2>Od;B(T;/.&
-r94.io[1OUS<f1eIXHKcG2iK##6"&QgW-\oW;hA~>
-o`#*_Y**4%ipm$Orp7u)p$;5no'G5SYcFP#`80S<da$mpg!]Zqs8DcYY`!(2BkCmdRIp@U%J7;r
-C2Rg"@9\fPp%n[9rsAYqkKfKE@U+lYh>[f[o]t&"L1=JFlK8*_qpN'DH"C;]<*!I??<^cDA7fIh
-AT[29lMhb#f;aXCARA><Dg6PQL$&F8rp%YE[[qAdm&9r7~>
-o`#*_Y**4&ipm$Orp7_N`p:Jb^q6hCN/3h#`80S%YKl1M]Wh22s8DcYY`!(3BkCmdRIp@U%J7;r
-C2Rg"@9eoRp%n[9rsAYqkKfNF@U+lYh>[f[o]t&#L1=JFlK8*_qpW-EH"C;]<**RB?X-rFA7fIh
-AT[29lMh1hf;aXCARA><DuP"jL?AO9rp%YE[[qAem&9r7~>
-o`#*__mY_]ipm$Orp619+6j@9%3>la$;[D7h<&&XcK!"r-M[W@rV>`pZBLK>R$E]4o_SRso[(%8
-R%0S,JXtfnqYnqC$2sJYcaTp<K:M;arsAYrld`SMP_,=gk5Q7phU/s3R#QQ;FaJO^I"dTHR$jJ2
-Rd9t<rsAY\`iu#$O*Z#%reLuJk5YJ\mb?C>^7Lk]W;hA~>
-o`#*ZUkW8cipcsMp"fB8mIV+`m,#gfX.uc7h=(70ftQD>j2T+,rVm5nY_6SBEG/onK^em=$iSSQ
-AoDX/BO>#Io$.1>roKu.@9o]!gA_B@WJ4hdV"!RI)#`C(R!*(K;HJLGZF-p8L1t./AnPUc]DUso
-)>M+?H=pbn?DG-N`Pp?ss8VuHXd"9O@X..9s*t~>
-o`#*ZV1rAeipcsMp"%[8mD9RQ]<IodLmP-[h=(70^o$&bj1r.lrVm5nZ%Q\DEG/onK^em=$iSSQ
-AoDX/BO>&Jo$.1>roKu.@:#c"gA_B@WeOqfV"!RI)#`C)R!*(K;HJLGZF-p8LM:70AnPUd]_q'p
-)>M+@H=pbn?DG-N`Pp?ss8VuHXd"9O@X74:s*t~>
-o`#*Z_lo/TipcsMorV=Eljj%)&ISpQ:SPe`n,)Q69AoU*Sm:^^rsJ57Xc8[=R[9,,nGE4nrS5>X
-Od;]1Ne"S/c2S%Jjhn-]K!+Xtrs%],YE=C=nE9fgrT2G=UmR0gG)iE)[BQToO-H$"R?WcQr9F;"
-ps6[OR?rbYV7X[b`ROGXs81Tm\#Gs[PNf%GJ,~>
-o`#*USpk'WipcsMo^2GHmdq7aj3"U,UTDDin,*+anBoYPs7bI*nbrIpl)/<.WHrAm@s759rsSJ2
-I:ACfH"^Ghc1oQ`#Q</JHsU*ip"TKOrR.Hg?!Y;?kPlCl^8$'h@ola#aP>qAk2+1GFD,9!@UY`"
-lMhao^RTFYA7Bc1lgXH7o_\[gps#U\B4YY(l)=W4~>
-o`#*UT710YipcsMo\e<Am_T^R[@rP8Q`A![n,*+anBoYPs7bI*nbrIpl)8B/WI&Gn@s@;:rsSJ2
-I:JIhH"^Ghc1oQ`#Q</JHsU-jp"TKOrR7Qi?!Y>@kPlCl^8$'h@ola$aP>qAk2+1HF_GB"@UYc#
-lMhao^moOZA7Bf2lgXH7o_\[gps#U\B4YY)l)=W4~>
-o`#*U^T!9KipcsMoS[$&m1'g>$OR5:U;YmVqu6WbdF%F_pYacqrVm5h`LVjeVOa*;PjJ;I$hVcD
-Ln(08RYu[Aps&gDrS#,eNe"q<g]%NWg;9eIJ&_3FrttFU_PirgJp*g.gudh_hT2LdS!f\/M6-I:
-ru(IQ]q_!^O-@uWnF?&@qu?]ke&%uMR$+!(W;hA~>
-o`#-TSpXpVgA^[C"T@]_p\""I$M!,kX.uc7h=(7?rr39#nF?DUrqQ0`rr3B*gRr(l_2W\Q@;"d$
-rs\kUW+'bVOa^kHB&<L2rs/AEVfl9Mg%sJ'#Pc0+F'E),qrn%trnXZ6D.[6aLXGVgrr<#sm`B`\
->$>!/P4JSO$NB_ai7ci8j6?C=rVn,AnE]E#]pj(TASZtFkNV-or9Wb8k/F0@AnGb*cfjZYk3)`H
-s*t~>
-o`#-TT6t$XgA^[C"T@N>dDbRk$Ga!9LmP-[h=(7?rr39#nF?DUrqQ0`rr3B*gS&.n_2`bR@;+j%
-rs\kUW+'eWP($tIBAWU3rs/AEVfl9Ng%sJ'#Pc0,F'E,-qrn%trnX]7D.[6bLXGVgrr<#sm`Bc]
->$>!/P4JSO$NB_ai7cl:j6?C=rVn,AnE]E#]ps.UASd(HkN_3pr9`h9k/F3AAnGb*cfjZZk3)`H
-s*t~>
-o`#-T^Sd0Lh#?mE"T?Pj8f@%,#n77L:SPe`n,*+`rs8Jjnb`@cq"=O`rsSh_^m'YkXJMAJMs($<%
-/o#$Nf(?RWL/KohYk_!#PlogUksTSqV2#Tps-RHLk+4Vkl2P"ilJBrR?NDkdI@&4s8W&caeauPL
-OslIo)8RqrqGmFjQ#7bn,!%^s!.O8nF5Vd]qLj]S#+d)n*KQAnaQ&6d_hlKR@9u)mdKW2mf'BhJ
-,~>
-p&>9rfUI1qAAA*6rr_uaq"=(I#jTO4W5RN\qu6*b%/\5;@X67aIVN;&b5VD?%K>h.I9iVgS:>$Q
-E97)srseu&j4W#8g[4q*f#-ePrVm?+nD;IBrVulhiRu`LrqQL&rp\gma3WGQSnqYIiVrfU$iTGD
-a6`g)o\S-WrVQU'rTr7if@K0ao\.C>rVlg-o=(-$>B&X%s8W)nimu]Zq>V-,le:"AlMgh`q8/\K
-BP(dkW9sT^rr`5OC0CL:32Q3Grq"sk`4`U`XfSb5[(FcZrr;`7_S!FWKl(F7COr.a[$dWS`50!q
-Y)I=3B52a`ZFI90PP;6[J,~>
-p&>9rfUI1qA\\37rri&Tfuh5$_?d`GLo&&Gn,*+Rrs\eJS76chQ@<RWB$1,Prsetr]7!t[aII`i
->B/d(r;R6*puL,ZfA#]jm+92@rr)j+rp\difDYaKo\nKRn,E+^%K>kSdE'\f^7T4HCZ59krsSel
-f>m7Wrq,'tir/cS!r_K>rmqA<rUegbg&:pM&+d8uBNoH9rr<#tpu9oVrV?I,rTi4kf'<87s7sR(
-H>$o$D5ck$r;Qltf5"Rg=?*/Js8MWGcG[H+YcY"3['dNop&>!cb/:m&VhJu"B5<*mZa?0pm)?fO
-]!%'3AnPk)S[,f5R[!QLs*t~>
-p&>9rgq9PJM9,Ydrri%ZC+^+e%L<LO$BrEan,*+Rrs\eS]T/*!ZDj@WMUDG&rsetsc_uAqb.Xg>
-KSegir;R6*q<I#!ioT_.nD`!err)j+rq#=.ir/oVp?CVroD\Ob%K>t_hUpZCcbH$,L#N%0rsSeq
-in3f#rq>O6lM^V[!r_WLro+.MrV#=)jSf)X&+dlSRtQUXrr<#tq<Hu!rV?I,rUAn.iU?dGs7t$U
-Vja$?QaH/Zr;QltfoULXFuZ\rs8M]Rh:U3%b/hWGc-=Vmp\t3eg"4[!`N>`"R@UCobg!f8m+Bn9
-dE/\dR@0SC^<FsK]X.@8s*t~>
-p&>9qe<bGiA\.^/rri;fq=jRMoEO?eX3pA4rpKdpp:Z]!N7jqXD.7%`qYpL'qp)$GD:$7nHsp9;
-li$i-rqG-bVh9;XWO9ORQuhZnrpJ^ob/:HB[J'1A`k&CNP0Nt&ruh:,e%:laFG6?XK4J52kPk5<
-g!RmUUOqY(gr[+(Ls#\qrsnq`b-[7VNMEen_5D=oqYpL+m]_pd>`%bGs8D-*^8cn'rVca4rqG*\
-UR%RPTs=LpoX0j'AnG[iJ'@WcrVlruke@"p3O[W8qqfH+UlpI\G'/(ZK85MVUXoD3Z^lo'H#IA.
-B52C3Jph<eeu=peJpMEMAnPdpG_(KqBRfHQs*t~>
-p&>9qeX1VkB"Rm1rri;ahU9C2_?RE4UXAN,rpKdpp:Z]!N7jqXD.7(aqYpL'qp)$GD:$7oHsp9;
-li$i-rqG-bVh9>YWO9RTQuq`orpJ^ob/:HB[J'1Aa1ALOPKj('ruh:,e@_)dFbQHYK4J53kPk5<
-g!RmVUP%_)grd1)M9Gksrsnqab-[7VNMEen_5D@qqYpL+m]i!e>`%bGs8D-*^T*"(rVca4rqG*\
-Um@[QU9XUqoX0j'AnG[iJ'@WcrVlruke@"p3O[W8qqfK,UlpI\G'/(ZK85MWUt5M4[%3#(H#IA.
-B52C3Jph<feuG!fJpMEMAnPdpG_(KqBRfHQs*t~>
-p&>9qft+#DNPkS`rri;GI7tRI%L*@LG1#aTrpKdpp<0q%SCt?PSs,,KqYpL'qq8lGL!\,[W02b$
-li$i-rqPR,`2olF`Qm#^\sr*crpo:3gXjTRanGAcg!Rs[\(^fXruh:0i6o0.Trl)DXHnR#kPk;D
-j58S@_Q2qsjkJ/#Yh8pRrsnqigWd+&Zbjr8e\n',qYpL+m_u]%Jskp(s8D<?eAeW;rVca,rqPO'
-_R[J$_9)TSoYn85rg<nYWS.(GrVlruke@"p3O[W8qrZY\_R?YIUnaccXKT%E_;Y@\aM+mZV4X3E
-R@BhGX/VG]f#G5%X/DV[R@0P9V5p_tQ^[?Fs*t~>
-p&>9qh3`IuAXiDbrr_rbq"=%H"QI&9o)A"U*:U4g@'&CoM/d$8Re?^\rp@4;=eXcaRs8=HV""B`
-,Q6oOY@q-TL6-A%LjW]Uk5P%GR[TP$I!M[1Y`jQ^I!fUSo_e_Fqq]5`?s\8GL2:U?@9ecXrRd?u
-QBI#DJ()9=P_4-kL%YKFp!UC%?<qlDE-@"k@q49irr3PoWJFtfV""E_i5)4IFCTpprr4)=jN*g$
-D1d%QHuQ7cnZ7LaAnG^mH'tnN`mNB$me,iCi[s?cpsm0RKlLX0=^#'8?=RSaG_1XmkFcNo?"%;V
-An>FX>?Y-1Gg1_G>$PKHralFG?X-c<=BBS.Y5a"~>
-p&>9qh3iP!AXrJcrri#Ufuh5#_?@3>b4>PuruCO6LL@4DZANX3A"3/ks8MDqFBYBr\XRhO?DR)i
-s!.L-bcb\bCPIpiI#*/[G38esTUVC9N-orM`j(_WH$k!QI.[@:1]-"IT3tuSP_O!hCLLJ,m/>S$
-PEqAeEe)WUY`sc`AqfpXrq4^MJR2W/QuR;)L1=cKqYpL+l)KPJ?)6uirSYPgMf`H\o`"k4rT)%i
-AT!0GEdVi/qsgbCDe<TpCjDGQ^W+[PkjJ-.rSfElo_?tPTnRJs?<LH:>[CoPD0UYebNGR5>[:cL
-AnGU`?<^T8=*`&@?s6fDAH$0H@p`JE>$+jJl)t&:~>
-p&>9qh7BGJO0/-Irri"VC+^+d%Km4Eb4>PuruCOJYD'@D^TaArN32dQs8MH3UO9'!ah4I3K!+VB
-s!.L1grc+;Js;grVm*+\O66H7^q@=jZ`'b5eB>>$V5L5[Sb2j[1]-:d^Q<o(S=,b7SW\Vqm/>nQ
-\%/rNTr-Gkb.+RLPbIdMrq>6rX,)+]TUDUZYEajsqYpL+l,KrjJZeMBrTDbLZ(mDOo`"k4rT`+M
-OGT3hTr=U#qshD(T:)+9SYj!@e(<I8mIKr7rSfj#o_@Cq_6'AqNJ3%>LlR^eSu&Kjg#oo6Mi<gc
-R@0G,NerOFIZr$VOGJgWQC+)-Q&gfYLP:29l)t&:~>
-p&>9ri0S\"A;0RGrri;fq=jRLoE4*fhYld?6gCXi@*J&VNH8W?MXg`Hqok^>C=;@PQZHJ=](Q+'
-rp%Lt?rMQ_`P77JBOP/&l2U+CMfW]JAS$."@r6'lA7f4[l2CX3qprKA=]_$-c+SaGB4,#@nb_+7
-M/R3CCN#8KEbJrj>'B93oZXOW<,AJK_jGIX@p<^+rVuosf;*h$?,H=6hQhEB?sHc`mJm4bi5(4Q
-EjE?WHZ!A@o('&0AS#IdBP_jEO-ucBZ*q3U`p!F%s81?YR<W=O<Duq-Am\kN&Rf6aDJsd;KO7ef
-@q'%^@p2q3<t'#lAm/8?A79%]AR/=6<rm7(Y5a"~>
-p&>9ri0\b#A;9XHrri;`hU0=0_?70AhYld?6gCXi@*J&VNcS`AMt-iIqok^>CXVIQQucS?](Q+'
-rp%Lt?rVZa`P77JBOP/&l2U+CN,rfKAS$."A8Z6nA7f4\l2CX3qprKA=]_$-c+SdHB4,&Anb_+7
-MK!BECN,AMEbJrj>'K?4oZaUX<,AJK_jPRZ@p<a,rVuosf;3n%?GcF7hm.NC?sHfbmJm4bi5(4R
-F0`HXHu<JBo(')2AS#IdBP_jEO-ucBZ*q3U`p!F%s81BZR<W=O<Dut/B4,%P&Rf6aDJsg<Kj\"j
-@q'%^@p2q3=:B/nB3SJCART.^AR/=6=93C*Y5a"~>
-p&>9ri4>bPOe;19rri;8HV,1C%Kd.DhYld?6gDU_K$Nf-Z_<_HU%/0_qq&W>K$ro&\tP+6_"Ia-
-rpACTOEHPj`P8(;RZ`8jl2U+TT9u1=Q^+/*LkgkKQ'm\hl2CX$qr-#2L3B3*c+Td@R?3$'nb_4I
-SX,h7S=?^MQBIJoJro?up"[`^H\&04_kiuoQ%k"NrVuosh8?4OJB%<]jijTgOG\IOmJm4bkLHeg
-KsJ@mVk0*@o('PkR$a;0R[p7U[(F2obKeJ^fC&Y<ruh3rdCZ6COFVLsH[U3kM34-nStDk)UOdT>
-N0K]tQ%s\aFps/NMgBPoMisHqQ]-:hFodB_Y5a"~>
-o`#-UP]^SJEpNAts7??ep$D;Pj2'a@s$ZkAU1IrnpXt[MAn6;Vs8MDpDHa4-l`?4a>@#qYs8MT-
-Uh!JR`T-LO]o6r=>bplho%(RBIqiCm<HOn>XaY%t?!u^ls"s]2]Tc]&S^Zrtj/n,S?<t/8rU&.L
-P(%.V@TRN?IUlARM<ju\Z$BA\]%ZT=bE7$Y?%_A?s!RZ_T6+:JgA'O+AS-3k;,aC]s8ColO^)V7
-i9Sg_H!=\@pX=Lu@:]@L6"akGDfpAVKo(nYS%ALrl+*7-B44b;GbVLOYFBWC@qB:fBnaC,WMYDh
-BP(^[H)@R?YKGP5WMueYFD>Du?YQ>8W<09Gn#l\@~>
-o`#-UP]^SJF6iJu"SCd-ai!M_!jnlbli0BPgnSFnhY5]cF(Ss2mJm1Q[r,BQl0GF5CKk,uqZ$Qc
-`2$pDIDt7:kIupq?sTSts74aUQ[`aY<`X@9ZE8UlAmJj*rr4hRhS#.Z=.Rh,o]**2D-gP[p&4:.
-^6="\A7AY\T7:BM:l=T7bcuFoA\-U`m)tQ:@U4WMrr4AB`h.?WA_Qq9XCZ!i>#A4rn,N@F^l_l9
-^>S>*T6XXLl1`YT@:<^GAjL'CC2\6@J;&iAR%1bbropt^G\:Ga;L,"B[BH'B@Uit^C2&C<YGnCS
-E+iim??rEIWNXIt^T"31P'(MOA7')Iri#t&b3uM5J,~>
-o`#-U[\T=SPO%l@"S@FZ.M;%X!Y#=mli0BPhnbV3hY5^3U6q+2mJm1Rc(B?gl0H9rSV_jLqZ$Qd
-f>Eo"N5aiIkJ4BrO+FJ's74aUW2c>LJ9QgEZE9[fR#H[Xrr4hRjO:SrG,*OQo]*EbSrJ99p&4:.
-^8S$$QAg6HTotC_ELH.gg<6=BICe/#m)uW0PD,:crr4DCdD)H4L"c=`a-)"2J9>q:n,N@Le[C3_
-^>S>*];CF;l1`YtO-,crrg?$?S=cRSWi`M5]"H>crp.qDV4!KrEJUEr[BH3^Ng,p!S!g%fYGnCg
-T:;74KnuV*WNXIt^T"31S>)L@QAU6hri#t&b3uM5J,~>
-o`#0XQ?d.RC=`CXrr`5dq=a^X#P.6Ah:prSnbMeYji6<Gs*X^eS76L"rSWl_B4,B:s81'6??Olp
-kbj/H>\i<ts8'mAH<=RmlhpeYbaWf_?,?77r:T0RP&"9(NPF*,fq*h.>@QXms8MN%Tk.;IdI[A;
-oXpN1>@#qYrqlBKViGOu<-5k$Z=$^Xbja>pN*KGaiVEKOiLka1>F"XUs"!`PRr)P[i7t\PD5jp_
-B:%6Erp[^p@9KJfqu,0MEE[;BrTCV-?<UZD@qGOL3bN,AF*`26p!9XhC1LLJLVhd-kiC=+Iq`J+
-BObeoj5S[aL2U[5?]*IpioKLtl/L^YZ\rm:A7'B*ro+"?mJ=!cJ,~>
-o`#0XQ?d.RC=`CXrri;^h9a+<_?[lg['-X=]"n-Y!k,,gli2A0bFN*_jo+,%G%Y2rl2UY*TO2lo
-punZ2AR'$0rr;i<YBj;Z_s@7#q95@Q?=(MBs8;QOY**R)=H1)Ijk68YAm8d*s8W)f^7f+?Fj]g[
-s7EsjEEcc&qYpBbj/@uR>uc!\d'@(]H-Gd3[u=QoWo<dQrSaH$@9f)crr4M@\XRGDI,NeeB5X`W
-EbLilp\sZtSmbg"j88f-YAm`bjo+ANE*c^S@:NmGAiaR<CNFfKX7af>JSJ_!<JSHFk31mW\pnF*
-AnY[i_W0Y-Tn[Jt@UG#Eio9%do',/nh6`,^An57idf/5-jR)fHs*t~>
-o`#0XZDF%TOkTg.rri;6GXNAF%fQn=$k3[@%K[(Cip6Vlqp`<?MWOfp[%s+OMs:9=fYE<!fD+RK
-YEt#uiVrlRfZL+DHc,1Is7t*VUlBoEpAb'`jhS?rLj56#fB(\kXI4lrj8]/Yo$Y@AI>H;Brr;W3
-\Y+e/g%t^Fp#EcnSVqcK^<j<AFc+E4iQnfeGcp$$rr(fjX-/%/mf*5;oZ=b;N0iJ`c'<p^[>9=)
-fD#:7e\@5mXQ03Vh8u@BLZSKt\W)?!NKKHlR/<:3R[p1NVo/2[a/b\qLj#!!g?.V[f".<;R$jD.
-P0)bDf<h]QR?NDqfAbfNmIKN$in_;RTp_4(MphUa!p&bFY5a"~>
-o`#0\SpbBcC8q('s8V]lq"=XY%.`iKfuLG"XLZ^>n+6GK"6[b[rp9Y=p:Z`"MX1<)Q?m4QA^gVB
-[r,BTm/>M0IUZQ1kl:YD[?G'&OQ-0;s7sX)F';l'qu6UAn$/*h>B%aLq>TigP@e$<jo>AXd]\:.
-=gIAms8V`'Rr2JHiVriV+7#tfA63'HjRh6#W5n/m\tE_>E7O^_s8LoOJ6uQaoD\bEn#qskCQ?fU
-NHDegi5i[anbr@/Y'aSseG&t.`0FV+L["j6hQqZ;=^"s4>$P?@@V#IM->.(*HI]WtFCnucBufQ:
-rr;umj0s>IAnPXcTDANWY`Ed9@UPDiq>U`q`g(a[A70WGW;hA~>
-o`#0\T7(KdC9%.(rr_oSfZF-0%)KWdXe(W3Q'8&Q^;9]`"1Y&Urp9Y=p:Z`"MX1<)Q[3=RB%-_C
-\8GNVm/>M1IUZT3kl:YD[?G'&OQ-0;s7sX)F';o(qu6UAn$/*h>B%aLq>TigP@e$=jo>AXe$"C/
-=gIAms8V`'Rr2JHiVriV+7#tfA63*IjRh6$W5n/m\tE_>E7O^_s8LoPJ6uQaoD\bEn$&$lCQHlV
-NHMkhi5i[anbr@0Y'aSteG&t.`0FV+M!=s7hQqZ<=^"s4>$P?@@V#IM->.(*He#`uFCnucC<,Z;
-rr;umj0sAJAnPXcT_\WXY`Ed9@UPDiq>U`q`g1g\A70ZHW;hA~>
-o`#0\[&KU_Q+HhcrrhtK@jhld%L<LP$OR1D$4IC>%Kd.J\,Pao0_W]"MONl2k-LqSP)Iuklcu,M
-[d<tJ_5WZQP3DrFkg$Z$I@K6ns8VoA^7pF4gACmL-1Aj`R"U19l1t>I_7,hcM<4d;qqK5oML)_s
-rr<#jah44$L#N%1ru^RG[$H5f\`ED<WN+#'n^"t>JVDYKs8W)W_Q&ZH[e'Lu1@N2lSX6>,e$G.J
-h;HAhf(&_9fZC(LMq%M#maeq,FI27lptiE>I=$HqL51YFO->otrg>(&RAS]_]q_!ZJq:u.qu6Wp
-puAo]R@'D.NjAK\n\MT+R?WN'nbN1jps-FGR?ieol)=W4~>
-o`#0bY^gP%AUF"BrtYM!q=aIQn`o#X]W8'.Uo1&mdH'cfr:C*SaOC%Qs!@0?Lg[%Js6HG3Cgq%n
-ouW_1FkQTeb+Eug>E%qKqSoF\>[52<rr35r]:3S@DrUcqru1.$M.9eIk5G>[n#qsd>`%bGs7Edj
-C0PN+q>UBun?A-h>^,B1ruh="Vh8A[No'X3o&/HpqV830@9]8err<#sd%GYh?IeiMs$GtLMJI3l
-WL\$Lh"gg9me6VZn[4^#D4p%Yf"HrE;.[o@s8McQa0:YNB4=qD<`r[6@:a%_B4Z"YTnR;p@9eiS
-rVZ[/q:UdLB4b[`MXpf;Y`Ed9@UPDiq>U`q`g(a[A70WGW;hA~>
-o`#0bY^pV&AUO(CrtYLoh9a*W^Ug\GQ&(ZkTr4WYVR=.Sr5&QGT?[9"s!@0?Lgd+Ks6HG3Cgq(o
-ouWb3G1l]fb+O&h>E/"LqT#L]>[52<rr35r]:3S@E8plrru1.%M.9eIk5G>[n$&$e>`%bGs7Egk
-C0PQ,q>UBun?A-h>^5H2ruh="W.SJ\O5Ba4o&/HpqV861@9f>frr<#sd%P_i?e+rNs$GtLMJI3l
-WL\$Lh"gg9me6VZn[=d$D4p%Yf"HrE;.[o@s8McQa0:\OB4G%F='8d7@:a%_B4Z"YTnR;p@9noT
-rVZ[/q:UdLB4b[aMt6o<Y`Ed9@UPDiq>U`q`g1g\A70ZHW;hA~>
-o`#0b]W7TkQC[U@rtG@EGXN>X%LijU$ORA5O/J%.$k<%C!t>X6qs=>/nA_\eY42JW[]>s`O3@4I
-]n_Htq>/RTVNHG#m/Qq2`2AK?`Uj*/#PH6PSV;mZrr2p9l,KrlJskd"s8VQ,\<_`7lMpnVbe9O"
-K\-&!rs%u3\=&&2kPkK(ro:quO+!JRqYp'Di:$O$aKUeVVX"0\s8CQbV2BfRq#::Ll,9itTWQ2I
-TTe1,qXEqHrVuE4\t5=nk4.H[Z&!FLb4>T3pZ';uR#$3<G'/"VK8PhYrg=.\T"De@SXGUlSE9_I
-rtG4]XJ2,NQB%[0s7*q4Tp_.$V"+9\#l)]UUm[O-Om/hEJ,~>
-o`#3jbCF>>ASnsUq#CBd'DV7gjOV8SX/2Yr_q3baZ*MsCnGMn\kK)$Fm/JBsWH)@^pAaWdLi?m?
-V;AUk=gIDnot?l=?X0]'s7*C\C0YK.qu6U"n?A-g>_D;?rs/PTUjlcWV"+Ha&F-<R@9]Mrs8M,[
-M.9eHkl1S]#4&4H@pFuZrr3`3dA)"m>f6.3s8DinrqXF(H<spup&=t,pq`M@>@ugls8W)RV1E2e
-Dfg)5C;'TDs!%ElW.SVlHC1@VA6;lY^#f.ks8Mocj4)&ZZE0a]K6:j;@fBsHA8HgPF(f/o@'0"s
-rtGCrV1reuA70`Ns7*=SEFrZfPO\JK#l)E)G@kAnGNl(+J,~>
-o`#3jbCOD?AT#$Vq#;*$jOhPe[Ao^TLm4C4_q3baZ)=V2^\kqN\=^n<m/JBsWH)@_pAaWdLi?m@
-V;AUk=gIDnot?l=?X9c(s7*F]C0YN/qu6U"n?A-g>_MA@rs/PTV12lYV"+Ha&F-?S@9fVts8M,\
-M.9eHkl1S]#4&7I@pFuZrr3`3dA2(n>f6.3s8DinrqXF(H<st!p&=t,pq`PA>A)mms8W)RVL`;f
-Dfg)5CVKcFs!%EmWIn_mHC:IYAQW#[^#f.ks8Mocj4)&ZZE0a]KQV!=@fBsHA8HjQF(f/o@BK+t
-rtGCrV1reuA70cOs7*=SEFrZfPO\JK#l)E*G@kAnGj21,J,~>
-o`#3jcDmA%R$u+pq#;'#L1;M>%1EUO$8Q4s_q3bg[V$!Xq[N];$_d@^s!?sKU4UDYs7!b+T9bhU
-iQdg:[d="dbIs^4J@+nIn]AA4LP4I[rr32l`OM7fQ0J;J#QEPsWfVe7nc&P"lGg)kJ?JDAro_;*
-P_,:drr2p%lbg&oK:M<-rtYLb_PW3<`Ua$.rVQQmq9ZpSNI].Drr3c/cG#s,KAc_.s8LonX-f*A
-U8+-@b5M8<0`BeGXI#0H]>1J/H?G(Xjno)Xrql6GeA]#)XJ;/DLPLnSR$jA-RA@$\R[K:l[IX4p
-'E77+Y+:uHN0N`0n\MT+R?WN'nbN1jps-FGR?ieol)=W4~>
-o`#6qhi2JbBP;n\rqcX2rTs@QiQJ^2WMHN)cJe6bqt/mh\(g-:rU^3Ub0]qNs!Ia#U1@`equ?<%
-MfWKKPI?KVHeJ5pn?A-r?!bbLs66G:A6jWHrr2p%l`,nQ?(CB_ru1aRT6O[J_=mp/rn!uq?!YVI
-s8C?>I:6K`nbrIlk,*c>?)7#irs/;5So@qLh#%!K#P"s\DHgE%r;Q^#o!Oiu>B]0.rs\eJTm:$G
-@q]FcB8?0Xs"O5]RWMk;>[1HHEJ1:2jQkXVf\"]ol1a`6kMtCKbe^K:DeN`p@V0q-C1_'eA@D7/
-rt=e+P]:;G?Ztc8nZ\'oAn#/3nbN1jpr8SCAn5:nl)=W4~>
-o`#6qhi;SdBP;n\rqcX2rT2eVZ_ES<PaA5XcJe6bqt/mhXKK+KrPAZITum)ss!Ia#UL[lgqu?<&
-N,rTLPdc]YI+e>qn?A-r?!khMs66J;A6s`Jrr2p%l`,nQ?(CB_ru1aRT6O[K_Y4$0rn+)s?!b\J
-s8C?>I:6NanbrIlk,3i??DR,jrs/;5So@qMh#%!K#P"s\DHgH&r;Q^#o!Oiu>Bf6/rs\eJU3U-H
-@qfLdB8?0Xs"O5]RWMk;?!UZLEJ1:2jQkXVg"Fosl1a`6kMtCKbe^K;DeN`p@V0q-C1_'eA[_@0
-rt=e,P]:;G?[(i9nZ\'oAn#/3nbN1jpr8VDAn5:ol)=W4~>
-o`#6qhl337R[Kr<rqcX1rOd/&%1ERN(Jp@-cJe6cqt/mhBabIK%Kd.JT_RpS-N;o=Q%@Zds7F@;
-TpVIXag?_[g%k[;`jhY!JBmohl,BilL6Ca!rr32g_m>PYW:0`c)Z%jrV2^#FpAb0lh8?4MJ'@Ze
-rRercObC(2rVm)a`3#/RY4;Mk#PZKWT883VqtpBun\qu/Lk"4Xrr32na1@^nNTU6?%/\PiV2p+[
-Ng,rtV=jcd0_il(UQ'_NI<pEsOK-@^n)i]kj5ASXp[RS4j5&80_69B$S!f\.OI;f4R@07s^A%L(
-'(<]HTp_1&OmE&;_6fo(P_c.*q>U`qcFKa=Q].'kW;hA~>
-o`#6sm&bA@AnZ4XqYL4/o^_[uY,e@pZGkP^oAlm+n,)qIb.c]qnc&._lHdfNmJeL0bFE$\j8T)R
-d>r?]DM3^N?+fV)s6HVBB3Sj$rVkNCIUccGm/I"iro']*?X'c,rr3o/\XRSB?/#2Us8'd/F'N>5
-r;ZQ,R<N(I[.aM!#Q<)DHsU*ip&=srn["Qp>^,?0qu6oeV28knEo[/urs%npP@RmUli-nnp:Zu8
->$@)HDJ!EsdJj+E(\4npDI@4VWi`_GcJS-cftXqsXe:!`qu6U*rr)WambP(/EFrcg@#Aq&AclRU
-U\FWb'(</mEFrZbHKtP#Y`Ed9@UPDiq>U`q`g(a[AR]oKW;hA~>
-o`#6sm&bDAAnZ7YqYL4/o\[]`MhmXjZGkP^oAlp-n,)qIb-/"Z^])(P\u!F@mJeL0bFN*]j8T)R
-d?&E^DM3aO?+fV)s6HYCB3Sm%rVkNDIUccHm/I"iro'`+?X0i-rr3o/\sm\C?J>;Vs8'd/F'N>5
-r;ZQ,R<N(J[.aM!#Q<)EHsU-jp&=srn[+Wq>^5E1qu6oeVMStoF6!9!rs%npP@RmUli-nnp:Zu8
->$@)HDJ!EtdJj+E(\4qqDI@7WWi`_GcJS-cftXqsXe:$aqu6U*rr)WambP+1EFrcg@#Aq&AclRV
-U\FWb'(</mEFrZbHKtP#Y`Ed9@UPDiq>U`q`g1g\AR]rLW;hA~>
-o`#6sm'rdWR@Bk\qYL4.oOf9T$48nBZGkP^oBO;snb`.Kb#AfZr=/o=%$LAPs!@Ql]oS!0rr;cB
-[%`t\XKIS0^@)"#lbg&sLk4C\rnbDhP_bsurr36&j27pYJ%5.Mru1OP]V((0gACpMqU30RLP"@[
-s7jjNUlgAEpAY'srRnubNe"q<rr35na1@[mNop?<rs.l(Z'pW1j8T&X#4BF=Q%>Fjrr3H$bIsO&
-H'jtfR?j2mrr)j5o#.u.N.\"-XgZ'khsgC!eBZ.V^S]QYrr3`4rV6$Qh7C%fR@&tgR[ok6R?iuB
-p\On&n&Mu4R?N>dlMpCj[%WnPLnsS:rs8DF\YPX[Ng&_+s*t~>
-oD]-ke:VIHBQ8U'qu$I:rTWITVkg?,e)^&okeDar]C5b!rThG=gZ\2"o^'uIp$Mc*p:Z`#M<b-@
-rS<QWAnZ$h=G#B*s8V5ZK4J5,jSo&"Q[*(NPOSSO#Q<&EH<ab,q>UC4n$&$i?#\g&s8V`&S8)8O
-jo5;PZ]K6:A%;=5rs/A=T64CFg%t^J#4&=M@pFuZqYpcaU5*JnGNf#*#3i+C@9ou)rr3GsYa/m*
-FiV=FB4bkDq#14/nZ\'nA9QD\jQZ+*qu6<(TS@c=F)SS`q>Ufm^R]IY@olp:Ir>6t!b[5Xqu7?/
-k-U(`Amef#m/QU[O)\c@@$C-Vrs8D=Q$-bOA9[::s*t~>
-oD]-ke:_OIBQA^*qu$I:rSk;MPaSMbe)^&okeMjt]C5b!rThG+Y.;<a_Rl\Wp$Mc*p:Z`#MX(6A
-rS<TXAnZ$h=G#B*s8V5[K4J5,jSo&"R!E1OPjn\P#Q<&FH<ae-q>UC4n$/*j?#em's8V`&S8)8P
-jo5;PZ]K6:A%;=5rs/A>T64CGg%t^J#4&=M@pFuZqYpcaUPESoGj,,+#3i+C@:$&*rr3GsZ'K!,
-G/qFHB4bnEq#14/nZ\'nA9QD\jQZ+*qu6<(TS@c=F)\Yaq>Ufm^R]IY@ols;J8Y?u!b[8Yqu7?/
-k-^.aAmef$m/QU[O)\c@@$C-Vrs8D>Q$-bOA9d@;s*t~>
-oD]-ke>&FuR\?e"qu$I3rNm"@+BkGPe)^&omF&)'_XIL(rThEe$k<1G!t>ZQp$Mc*p<0t'Rd0qQ
-rS=fSR@Bb/I$*7]s8V6#Xd+TsjSo&*\tt[NV==Ka#Q<;kVM]lSq>UC4n&Dl+LPb$is8V`6]pj_8
-jo5;P`3c8%M88ocrs/AH^S?[:g%t^J#4'78Q%PUnqYpca]W[fdP3DlE#3j.3P(C"1rr3Gs`jqIi
-M9!H.R@0DFq#14/n\DN(Oc\#NjQZ+*qu6<6^TXQ5Tps$rq>Ufmcb?0BP_4CfTUu.N!g]SOqu7?/
-kKU<'R?2ogm/QUl[%WnPLnsS:rs8DF\>5O[PEtI3s*t~>
-oD]3skbrH1ASZOGVsOE^ruh3s_Psrbh<an5ikpgsNPF3?rr<#qkeY$ekje<3d)>MBs!@0?M.*4L
-s8W)ZQ?m4V@TQdJnG`Idd\;/!>_MAAq9"eAAS-kirr35u`hIN\CuG9krs%_dLh'b>l2L\om]Vgb
->`7qJs73CMEFWXdp\t1)oYR8@?>SU"s8W)WVh8D`V"+<]#3hh8Cgq>Hrr36&goH!5?c2X;rsn@p
-N+6(Lk2;MDBOu/=rr2p%nZ@^h@Vk9*rri>h\rUh0Acl_$li-e]')U1eNc&E6<-H<EEFrfrAoc)n
-r;RH,bc6,*A6N-Ao)J6aO)\c@@$C-VrsAJ=OEG/JA9?`.WW.J~>
-oD]3skbrK2ASZOHW9jN_ruh3o[%t+Oh<an5il$q!Nka<@rr<#qkeXC'\\H"nVRQ-`s!@0?M.3:M
-s8W)ZQ[3=W@TQdJnG`Idd\D5">_VGBq9"hBAS6tkrr35u`hRT]D;bBlrs%_dLh'e@l2L\om]Vgb
->`A"Ks73CNEFW[fp\t1)oYR8@?>\[#s8W)WW.SMbV"+<]#3hk9CgqAIrr36&goQ'6?c2X;rsn@p
-N+6(Lk2;MDBOu2>rr2p%nZIdi@Vt?+rri>h\rUh0Acl_$li-e]')U4fNc&E6<HlKGEFrfrAol/o
-r;RH,c)Z;,A6N0Bo)J6aO)\c@@$C-VrsAJ=O`b8KA9Hf/WW.J~>
-oD]3skd-eER%:(W_XRR(ruh3V>_of0h<an5l.*2,SA3eNrr<#qkeTIl%1WjW$tf(ts!@0SZ%oLO
-s8W)ZZDO(YP_"%onG`IdftjYOKU:s'q9cUFR$496rr35udD;Q7LuA72rs%`,Ya'p*l2L\om`)`%
-Jt20,s73t0TTtVPp\t1)oZk7FMMU6js8W)Y`3#2SY4;Ag#3i_%SWf6#rr36&hoMjZK#m]crsnA4
-Z]p$0k2<83R[9K&rr2p%n\;?&PEP/,rri>ja0_K<R0/nXmf*+`')US3Z_!MAH&BY@TUD4:R%Dn-
-r;RH,fZ0t[Q\^!uo)J6r[%WnPLnsS:rsAJF[A0.XQ_!.8WW.J~>
-o)Bg*dtqgLAnlF@S]^I$s82'2fB2Z"kL6u'D0r;*jnJcQrsJYc_8"[ena+Z@na6>[lE,>?]Cl1'
--L%4TCLpdPK&6D)s7jL(H!t'Mn,N:<N,WB>GO5A0rpIXpE+4(Trr36&gSB=->`J.Mru1+#LLXkt
-nc/X]]7k-6BpJ>js8M,mP\afRkPkJdrR%Bf?<t/8qYqf)RXT$_DT;YTs8(!>H=1:<qu?]qiMM68
->cdMc]Qe%$C6\Mmrs/(sK5P7<\,H:*55jQB]74L*AnZ")S^HX!rqc!<cF9']AR88;ZerB<A7]Cg
-DMZI5s8W)mf!pl_ARAAEfD5I:Y`Ed9@UPDiq>Us#c&-IPB4u1McIg^bb5JLCJ,~>
-o)Bg*du%mMAnlFAT$$R%s82'2fB2Z"kL@&)DLAJ,jnJcQrsJYc_6'iM^UpANna6>[lE,>@]Cl1'
--L%7UCLpdPK&6D)s7jL(H!t'Nn,N:<NGrK?GjPJ1rpIXpE+4(Trr36&gSB=->`S4Nru1+#LLXkt
-nc/X]]7k-6C6nMls8M,mP\afRkPkJdrR%Eg?=(59qYqf)Rso-`DT;YTs8(!>H=1==qu?]qiMV<9
-?**Vd]Qn+%C6\Mmrs/(sK5P7<\,H:*55jQB]7=R+AnZ")T$lg#rqc!<cFB-^AR88;ZerB=A7]Cg
-DMZI5s8W)mf!pl_ARAAFfD5I:Y`Ed9@UPDiq>Us#c&6OQB4u1NcIgacbPeUDJ,~>
-o)Bg*e"E%mR%0kP^=i/Xs82'2fB2Z"mGQ<uP`W&jjnJcQrsJYc_*8>;%LihXna6>[lGocU_=dg-
--L%t?SX5:\Ol$!8s7jpTV36P3n,N:<Z_*YOSF$:Urp\=LT9#/urr36&hSQ:UJtDB/ru1+@YEb!S
-nc/X]`NGf"R'-)]s8M92\=J\DkPkJdrReucNe"q<qYqf)[],gaR*bg3s8(?dViZ_hqu?]qj2A$\
-J@+n:_5*KeR^)Yers/)/XIbfI`r5l955jcd_Q'&lR@9\C^#&/Trql3IgsER+R#ZK:\)4upQC+)0
-T<HoFs8W)niR#$+R#ZK?fD5I:_6fo(P_c.*q>Us#d^#L4R@BhYgZ%2BgAS2SJ,~>
-o)Ba/m(IUQ@qB=nJ![1Jce7C<f@J6]Vg;umQbhDFr;-F"qrY`0g$%bO`:<9q#6*J_F)'D)rr4>5
-W.f+u<a*6,rr<#i^n5aYBXIF3ro&]MAnPt[p&*jhVh8bsIHgb2-2YoZH='sZo)Jagd@G\sD6rp8
-s7k,rBP(q$_Ya,_]:+%ZAprqCrs/;6Soe1Bg%tRFEU03?BP2(>lM^"mYDdF1DqY-is8CB@HsL(&
-p\NU&D.[I&_>XE6oYc)fAncbIrVui^c'`OhJ7iA'B4u::SZ]T?_S<LQLiHp0:fES5o@f+9@:a(g
-H'PYSbKe,8P]gVF;H'1Mrr;MmO)\c@@$C-Vrsnq]JnS_-BPrBkWhXj:p9+FG~>
-o)Ba/m(IXR@qB=nJ![4Ld+[R>f[e?_W-W)oR).MGr;-F"qrY_sXgu'C\+/nd#6*J`F)0J*rr4>5
-W.f+u<a*6,rr<#i^n5aYBXIF3ro&`NAnQ"\p&*jiVh8bsId-k3-2YoZH='sZo)Jagd@PbtDR9$9
-s7k,sBP(q%_Ya,_]UF.[Aq'"Drs/;6Soe1Cg%tRFEU06@BP2(?lM^"mYDdF1E7t6js8CBAHsL+'
-p\NU&DJ!R'_YsN7oYl2hAnceKrVui^cC/akJS/J(B4u::T!,fC_nWURLiHp0:fES5o@f.:@:a(g
-H'Y_Tbg4;:P]gVF;H'1Mrr;MmO)\c@@$C-Vrsnq]K4nh.BPrBkWhXj:p9+FG~>
-o)Ba/m(f'QPaIr5Wk-3th;mk`iSiSA`MSQHT>B7Nr;-F"qrY^Z$k3XSAb#3g#6*T(U6+()rr4>5
-]<.ZgJ9Sfurr<#ic+g$<OM1;dro'oKR$jP^p\a=.`N>\rT'?7S-2Z3-VN6;8o)JagfY4>OR)&Cp
-s7k-ER[BS?dJNb#d_)KIQ(I7>rs/;D^8$O7g%tRFEU0s,R[KYMmeuV/ag.P'QJDK>s8CWfVi6/O
-p\NUASXGq?dJa+FoZ="uR%()6rVuicgq/okT9bb0R@BkN^<+gRf@8*^Yb78=GB9;0o@fq'P*_T.
-VRXe#gYLQ.\"oCPHul1Jrr;N)[%WnPLnsS:rsnq]W0s!?R\$Rn`knUap9+FG~>
-nc'R)iM^Kt?t<kbFFfLGWNrn2QuunCBp6-WlhUPTrs8Ma_8"[bf>[7Ks(;9#lH6&KFN!>@s8VZ#
-MJQNsK&6D(o^(GHP&OuPU>PtMl(Ds(AT*="XcddEAS,Ll[+3%=oXpK)>?o)?s8Vr8NH&QBIE]p?
-q;R?H@V9bCWMY2mBP(geDm\'3d-e,uA6Na,rqcY7o"B-RA8?UbXdaBWB4YXiRa]EmoY-W)=^g.b
-rp-Y+@qKV2^>dMmfnj<LAp9TQaMOii?&[14CgCFYAS>n&J;9&@Km[`H>uXU'PgK""m_s9V?".A\
-G(l6RSs"Y@@Tu]-MUV7us7*1@@piSIP4AAJ%fYUXB3\hR@qB=iA7:epY5a"~>
-nc'R)iM^Kt?t<kbFFfLGWj9"4R<E(FC6Q6XlhUPTrs8Ma_6'iJX0hBcs(;9#lH6)LFN!>@s8VZ$
-MelWtK&6D(o^(JIP&OuPU>PtMl(Ds(AT*@$Y**pHAS,Ll[+<.@oXpK)>?o)?s8Vr8NH&QBIEg!A
-q;RBJ@V9bDWMb8oBkCpfDm\*5d-e0!A6Nd-rqcY7o"B0SA8?UcY+0QZB4YXiS(#QpoY-W)=^p4c
-rp-\,@qKV2^>dMmfnsENAp9WRaMXrk?B!:5CgCFYAS>n&J;9&@Km[`H>uXX(Q-f+#m_s<W?".A\
-G(l6RSs"Y@@Tu]-MUV7us7*1@@piSIP4AAJ%fYUXBO"qS@qB=iA7:epY5a"~>
-nc'R)iNJ<#OHu<*UT:f<`lu]J];(@6JXa7"lhUPTrs8Ma_*8>;$r-6\s(;9'maoFRT$Qg's8VZ-
-Z(6brOl$!7p@74k\"B%Y\E<ejl*-V?R%LS"agRq4QC+&1a5PS)oZOe8LjmD=s8VrAZ_<bSVqKhH
-q;S9;PF8/P`l+mNQ'[l*S]B^>h<r7hQ\C.PrqcX&o#%)_QCY"hah=C>rg7/a\DQ#goZXk7Kn/"X
-rp.%bQ'n5Fd-9EIfqXaoRAILAf[[p/JXOolOc#3bR$sS@Wir\4Y,IqVMgf_kSC$j*m_tEKN0BX"
-Uoq8B^:()5P_j[*Q.,F+s7*h'Q&poVU[e0[%fYUjOc,9aQ'[r1Q&;L1Y5a"~>
-nc'L+p",mS?!CTA?t!MS@pr\J=&s:,]$fg9rUp0qqrY`/eBP_pnc)Gai3TGCAR/\cG-UrEpW.Sa
-:gh?5rqO73TQadJ>$Z,lPPXprG@4QW>$G08OFL_B=^#BOBs$TcB3S;>h#%-Oq9*kc=]o$FBP6f&
-^2mU`r`Tq;CS5cU=]np>C2'g1M.KgeFQ`K"55O#m@p3&?>$>'WQ=jB(=^c&ZNT?L@>>]7urr;`B
-JRDVb>\S1mVWGI1?<^]DBP:jZBq*B3fqN.d>?bE@rEq6b?!C?/;-%Y9dd[58qr>,4?<^T=?X[DR
-@UNJD<)HhTbjYN1s7)^m>$"^$O7E#F"nKol?WgM1=Thf*;NL@Ns*t~>
-nc'L+p",pU?!CTA?t!MS@pr\J=''C.]$fg9rUp0qqrY_rWM?N]nc)GaiO#VEAR/\dGI%,GpW7\c
-:gqE6rqO:5TQadJ>$Z,mPPXprG[OZX>$G08OFLbC=^#BOBs$TcB3S;?h#%-Oq9*nd=]o$FBP?l'
-^2mXar`Tq;CnPoW=]np>C2'g1MIfpfFm&T#55O#nA6N/@>$G-YQ=sH)=^c&[NoZXB>>];!rr;`B
-Jmhed>\S4oVrbR3?<^]DBP:m[C7EK4fqN1e>?bE@rEq6b?!C?/;HIk<dd[58qr>,5?X-c??X[DR
-@UNJD<)HhUbjYN1s7)an>$"^$OR`,G"nKol?WpS2=Thf*;NUFOs*t~>
-nc'L+p"-."K85AFOHG`kQ'.)ZH$+e2]$fg9rUp0qqrY^Z$k+u[nc*5"kKV#QQ].!!UW332pW]Ol
-GC.C"rqOsb^nm-KLl@n"ZMO4<QAC6NLk^D*R$!;]L51hRO1shcQA'R/h#%-Oq9YalL4tJJP)Sku
-^lsS.Lkp_3Jte9^L5(JEPE3H<Y*4EZMWag855O$,MhHkAL4OW0S;i;YL5_=YW8t@QKQVt/rr;`B
-S;W,XMjBou]&gYfKnbMJR@&t_J>(6Pfr9aYKo(eMrK&XlN/3%2F*3/;dd[58qr>2JJqSo;O-,Wj
-PE:]UHZF=pbjYN1s7*LXJ9uQ_TCM^V"nKp)Jpr4KJHUIKF.`!*s*t~>
-nGa:'o@UL#@Tc`5=&r:!<*O-jVSC^HpAOR^#5dQ!\[\s2nc&ag`,8sbrDsP4R.UFUgM'bkOQ-0;
-mYPO[qc>FQG45Cl\:.[a='g0Qa1$"i='KBoY1hojD.[F1jo5;[qr!`H='&mRNP4]TiO!b,<tf%s
-]Zd<l='&U?LT]@gI;<G.R-aYK+TCiPO^M6l>Ap1P`IV;r=(lrVd,:%)An[7ks8W&_]Qa?V)J"5b
-dI?,&I:$&S='K[-]%6?Io@LF+AQW&8r`9J.<)cdtAq$SmhXpdGrtP7f_j,4H='&F(=&r:!<F0sM
-cL(T0rrVc"K`65uJ$AM=rrr>daJ+0"rFQ.II^&CGs*t~>
-nG`^lo@UL#@p8k5$s$>+<Ej6lVSC^HpAOR^#5dQ!Vim_=nc&ag`,B'erE'V6R.UFUgM0knOQ-0;
-mYPR]qcGLSGOPLm\:.^c=C6BTa1$"j=BoTrYM/#lDJ*X5jo5;[qr!`I=BK*VNP4]TiO!e-=;,2!
-]Zd<m=BJgCLTfFhIV`Y2R-aYK+TCiPO^V?o>]?@R`IV>t=D</Yd,:(*B5*Ins8W&_]QjEX)J+;d
-dI?,&IUH8V=Boj/]%6?Io@LF+Am&5:r`9J.<)lk!B7HbohXpdGrtP7f_j,7J='&F(=&r:"<F:'P
-cL(T0rrVc"K`65uJ$AM=rrr>daJ+3$rFZ4JJ$ALHs*t~>
-nG`[ko@UL4J,Xa'H[9mXFEi=sW5$pJpAOR^#5dQ!57013nc&agc]s*,rH8`sWV$5fgQ-Q%S)X>F
-m\bqiqfXW:O73&0\rV,[G']"Ia1@.PG'JS&ZJ+?3LOO]6jo5;[qr"5uG'87gR(r"aiO4XCFq]7c
-]ZdR7G'8+]Pd9$#RY6-?V!RpW:&aV(S:#L'G_;d/`KY^mG(5INd,:gXIXdpSs8W&_^5[>[G(,FI
-eF;G+NdGqjG'J\/]%6?Io@LF7IsH<cH@(!bGBItMIZ12@hXpdGrtP7f_juO.G^4U^H[9jVFaAnF
-cL(T0rrVc+Q2ZR@Nk"ZTrrr>daJY#JrI+j!Nk"Y_s*t~>
-n,EUkpZ'?$Q[esZ#_\MH]Zo="q#9a^"oIH!ZG#VprrW&S\bi?:[++aJroh(qZdSLGs6n+6qPbL=
-b4#B*j2\I*X0fq*n)M6dWirtTh!j[V]"#B!nG`G6rpe@BWiWSBcJnTtpYiumWN<VTkOIBBXfAS8
-akZCObIG'sg%G.?)>idI[]?F4_:e8@bH\(L[`-kamF/_X^=MrUruh-t`36/A[DLGZqY0$k[&K4e
-YeS]Op\t3lp>sQ-SrS-pGmK4fX16=.meZq]rs/Q"m+&kSOb<RW#)SnWa5?IdrVlroim%JA!mTa"
-p\tBnn(c("rO;sCb2W3!s*t~>
-n,EUkpZ'?$Q[esZ#_\MH]Zo="q#9a^"oIH!VmYm]rrW&S\bi?:[++aJroh(qZdSLGs6n+6qPbL=
-b4#B*j2\I*X0fq*n)M6dWirtTh!j[V]"#B!nG`G6rpe@BWiWSBcJnTtpYiumWN<VTkOIBBXfAS8
-akZCObIG'sg%G.?)>idI[]?F4_:e8@bH\(L[`-kamF/_X^=MrUruh-t`36/A[DLGZqY0$k[&K4e
-YeS]Op\t3lp>sQ-Sr\3rGmSeROK5n6h<t.=rVm-%qWubIYE=M:GmAYPS[6Aoo)8Oe!r1d"rl"r`
-iqW9J"T.ZCb.dha"22k:poaXI~>
-n,EUkpZ'?$SW*N'#`tOY]Zo="q#9a^"oIH!@u'F@rrW&S\bi?:[++aJroh(qZdSLGs6n+6qPbL=
-b4#B*j2\I*X0fq*n)M6dWirtTh!j[V]"#B!nG`G6rpe@BWiWSBcJnTtpYiumWN<VTkOIBBXfAS8
-akZCObIG'sg%G.?)>idI[]?F4_:e8@bH\(L[`-kamF/_X^=MrUruh-t`36/A[DLGZqY0$k[&KLm
-YeS]Op\t3lp>sQ-U6^Z7L^Ap$R&da>h<t.=rVm-%qWubIYF1IML^/d#TsMeso)8Oe!r1d"rl"r`
-iqW9J"T.ZCb.dha"22k:poaXI~>
-mJd^oo&\KIa2Q$<cIh1Do_\XSrri5`f&$)irrW/kkkj?Mk4/?Ks7kj<kOSTOs8)-DqViOVmJ?k^
-qsik0j66%1rqYpAj5oUtqYp?\lKRX*qu-O?rU]75j65q(qu6WpqX3J)j6?47rqGd?j5oUtqYp?[
-l07R,rV-=/rUf@7j6#e*rql3Ij5fIoq#:0]lfmd.r;Q^2rqc'EioB7kpAFphqsin.gY_/]p\k$i
-"o\)WgsX=C`<XK0fAPrcqu6Ek#6";aimuAprl#)_d+d^Qqu6Nn!r_obrp^'\q#0pd$i^"om-<j"
-lKn'9rN?0N~>
-mJd^oo&\KIa2Q$<cIh1Do_\XSrri5`f&$)irrW/kkkj?Mk4/?Ks7kj<kOSTOs8)-DqViOVmJ?k^
-qsik0j66%1rqYpAj5oUtqYp?\lKRX*qu-O?rU]75j65q(qu6WpqX3J)j6?47rqGd?j5oUtqYp?[
-l07R,rV-=/rUf@7j6#e*rql3Ij5fIoq#:0]lfmd.r;Q^2rqc'EioB7kpAFphqsin.gY_/]p\k$i
-"o\)WgsX=C`<XK0fAPrcqu6Ek#6";aimuAprl#)_d+d^Qqu6Nn!r_obrp^'\q#0pd$i^"om-<j"
-lKn'9rN?0N~>
-mJd^oo&\KIa2Q$<cIh1Do_\XSrri5`f&$)irrW/kkkj?Mk4/?Ks7kj<kOSTOs8)-DqViOVmJ?k^
-qsik0j66%1rqYpAj5oUtqYp?\lKRX*qu-O?rU]75j65q(qu6WpqX3J)j6?47rqGd?j5oUtqYp?[
-l07R,rV-=/rUf@7j6#e*rql3Ij5fIoq#:0]lfmd.r;Q^2rqc'EioB7kpAFphqsin.gY_/]p\k$i
-"o\)WgsX=C`<XK0fAPrcqu6Ek#6";aimuAprl#)_d+d^Qqu6Nn!r_obrp^'\q#0pd$i^"om-<j"
-lKn'9rN?0N~>
-li.%cq=O[V"7l-]roa:`r:fsaJcF:#!r`#ppAY6oqtK[[nH8@Tq>Kma"9&&fo)A.]o(Mt[LAuc~>
-li.%cq=O[V"7l-]roa:`r:fsaJcF:#!r`#ppAY6oqtK[[nH8@Tq>Kma"9&&fo)A.]o(Mt[LAuc~>
-li.%cq=O[V"7l-]roa:`r:fsaJcF:#!r`#ppAY6oqtK[[nH8@Tq>Kma"9&&fo)A.]o(Mt[LAuc~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-%%EndData
-showpage
-%%Trailer
-end
-%%EOF
diff --git a/docs/draknet_advanced_doc.txt b/docs/draknet_advanced_doc.txt
deleted file mode 100644
index a0c0c63e0..000000000
--- a/docs/draknet_advanced_doc.txt
+++ /dev/null
@@ -1,165 +0,0 @@
-This document details the entry points you can call without the DrakX graohical
-toolkit. First, the general variables you will encounter further. If you don't
-know wht a variable is, look here. Any additional locally variables are
-commented 'in place'
-
-------------------------------
-Special types (in upper cases)
-------------------------------
- DB_FILE : file storing the ISDN ISP database. see share/isdndb.txt : file of lines in 'Unlisted - edit manually' or /^(.*)\|(.*)\|(.*)=>([0-9]*)=>(.*)=>(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})=>(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})$/ where $1=Land $2=City $3=ISP_name $4=phone_number $5=hostname $6=dns1 $7=dns2
-
----------------------------------------------------------------------------------------
-Summary of common variables used (local variables are described in the function itself)
----------------------------------------------------------------------------------------
-notation : keys : description : type : format (regexp or enumeration. `...' means it's not exhaustive
- $prefix : prefix path (empty in post-install) : string : path
- $isLaptop : flag for laptop : boolean or int : guess
- $isdn : hash table containing isdn infos
-  $isdn->{login} : cnx login : string
-  $isdn->{passwd} : cnx passwd : string
-  $isdn->{phone_in} : user phone : /^[0-9]*$/
-  $isdn->{phone_out} : ISP phone : /^[0-9]*$/
-  $isdn->{dialing_mode} : dialing mode : "auto" or "manual"
-  $isdn->{driver} : driver used for the card : "hisax" or "b1pci" or ...
-  $isdn->{type} : type of card, used for the driver, see netconnect_consts : integer : /^[1-22]|[24-37]$/
-  $isdn->{irq} : irq of the ISA card : integer |
-  $isdn->{mem} : mem of the ISA card : string  |
-  $isdn->{io} : io of the ISA card : string    | see netconnect_consts for examples.
-  $isdn->{io0} : io0 of the ISA card : string  |
-  $isdn->{io1} : i01 of the ISA card : string  |
-  $isdn->{idl} : amount of time after the cnx times out in secs : int
-  $isdn->{user_name} : not used anymore. Not explicit. It represented the name of the connexion.
-  $isdn->{card_type} : card type : string : "isa" or "pci" or "pcmcia"
-  $isdn->{protocol} : cnx protocol : int : 1|2|3 : 1 for old german specific (not used anymore), 2 for europe, 3 for rest of the world
-  $isdn->{id} : card id. Associated with vendor, identify strictly the card. see pcitable : integer
-  $isdn->{description} : card description from pcitable : string
-  $isdn->{vendor} : card vendor : integer
-  $isdn->{passwd2} : passwd verification : string
- $modem : hash table containing modem infos
-  $modem->{device} : device of the modem : string : /ttyS[0-9]/
- $adsl : hash table containing modem infos
-  $adsl->{login} : cnx login : string
-  $adsl->{passwd} : cnx passwd : string
-  $adsl->{atboot} : 
- $netc : hash table containing system-wide networking infos (maybe not true, correct this) : 
-  $netc->{NET_DEVICE}
-  $netc->{dnsServer2}
-  $netc->{dnsServer3}
-  $netc->{DOMAINNAME2}
-  $netc->{NET_INTERFACE} is set to "ppp0"
- $in : interactive object
-
-------------
-Entry points
-------------
-
-isdn_write_config_backend : write isdn info, only for ippp0 -> ask_connect_now
-input :
- $prefix
- $isdn
-$isdn input:
- $isdn->{login} $isdn->{passwd} $isdn->{phone_in} $isdn->{phone_out} $isdn->{dialing_mode}
- $isdn->{driver} $isdn->{type} $isdn->{irq} $isdn->{mem} $isdn->{io} $isdn->{io0} $isdn->{io1}
-
-write_secret_backend : write login and passwd into /etc/ppp/{chap, pap}-secrets. Replace old passwd only if same login
-input :
- $a : login : string : /^.*$/
- $b : passwd : string : /^.*$/
-
-connect_backend : launch the cnx script
-input : $prefix
-
-connect_backend : launch the cnx script
-input : $prefix
-
-read_providers_backend : build the tree of isdn ISP
-input :
- $file : 1st location of the file : ISDN_DB_FILE
- $file2 : 2nd location of the file : ISDN_DB_FILE
-output : the list of ISP : array of strings : array of /^(.*)\|(.*)\|(.*)$/ where $1=Land $2=City $3=ISP_name
-
-get_info_isdn_backend : fills the infos from the line of the tree returned into $isdn and $netc
-input :
- $isdn
- $netc
- $name : the line choosen in the tree of ISP : string : /^(.*)\|(.*)\|(.*)$/ with $1=Land $2=City $3=ISP_name
- $file : 1st location of the file : ISDN_DB_FILE
- $file2 : 2nd location of the file : ISDN_DB_FILE
-$isdn ouput
- $isdn->{user_name}, $isdn->{phone_out}, $netc->{DOMAINNAME2}, $netc->{dnsServer2}, $netc->{dnsServer3},
-$netc output
- $netc->{DOMAINNAME2}, $netc->{dnsServer2}, $netc->{dnsServer3}
-
-isdn_detect_backend : detects isdn pci card and fills the infos in $isdn : only detects one card
-input
- $isdn
-$isdn output:
- $isdn->{description} $isdn->{vendor} $isdn->{id} $isdn->{driver} $isdn->{card_type} $isdn->{type}
-
-isdn_get_list : return isdn cards descriptions list. This function is not use internally.
-output : descriptions : list of strings
-
-isdn_get_info : return isdn card infos. This function is not use internally.
-input : the description of the card (see isdn_get_list)
-output : a reference on the decription of the card. : ref on a hash(description,type,irq,mem,io,io0,io1card,)
-
-conf_network_card_backend : configure the network cards and return the list of them, or configure one specified interface : WARNING, you have to setup the ethernet cards, by calling setup_thiskind($in, 'net', !$::expert, 1) or setup_thiskind_backend before calling this function. Basically, you call this function in 2 times.
-input
- $prefix
- $netc
- $intf
- $type : type of interface, must be given if $interface is : string : "static" or "dhcp"
- $interface : facultative, if given, set this interface and return it in a proper form. If not, return @all_cards
- $ipadr : facultative, ip address of the interface : string
- $netadr : facultative, netaddress of the interface : string
-when $interface is given, informations are written in $intf and $netc. If not, @all_cards is returned.
-$intf output: $device is the result of
- $intf->{$device}->{DEVICE} : which device is concerned : $device is the result of $interface =~ /(eth[0-9]+)/; my $device = $1;;
- $intf->{$device}->{BOOTPROTO} : $type
- $intf->{$device}->{NETMASK} : '255.255.255.0'
- $intf->{$device}->{NETWORK} : $netadr
- $intf->{$device}->{ONBOOT} : "yes"
-$netc output:
- $netc->{nb_cards} : nb of ethernet cards
- $netc->{NET_DEVICE} : this is used to indicate that this eth card is used to connect to internet : $device
-output:
- $all_cards : a list of a list ( (eth1, module1), ... , (ethn, modulen)). Pass the ethx as $interface in further call.
- $device : only returned in case $interface was given it's $interface, but filtered by /eth[0-9+]/ : string : /eth[0-9+]/
-
-adsl_conf_backend : write adsl configuration
-input :
- $prefix
- $adsl
- $netc
- $adsl_type : type of cnx : string : "pptp" or "pppoe"
-$adsl input:
- $adsl->{login}, $adsl->{passwd}, $adsl->{atboot}
-$netc input:
- $netc->{NET_DEVICE}
- $netc->{dnsServer2}
- $netc->{dnsServer3}
- $netc->{DOMAINNAME2}
-$netc output:
- $netc->{NET_INTERFACE} is set to "ppp0"
-
-modem_detect_backend : detects modem on serial ports and fills the infos in $modem : detects only one card
-input
- $modem
- $mouse : facultative, hash containing device to exclude not to test mouse port : ( device => /ttyS[0-9]/ )
-output:
- $modem->{device} : device where the modem were detected
-
-get_net_device : return the device choosen for the net cnx
-no input
-output : name of the internet device.
-
-read_net_conf : read the information stored in $prefix/etc/sysconfig/draknet and $prefix/etc/sysconfig/draknet.`type`
-input:
- $prefix
- $netcnx
- $netc
-
-set_net_conf : set the information from netcnx in $prefix/etc/sysconfig/draknet and $prefix/etc/sysconfig/draknet.`type`
- $prefix
- $netcnx
- $netc : useless! REMOVE ME
diff --git a/docs/interactive/ask_from b/docs/interactive/ask_from
deleted file mode 100755
index dad69247e..000000000
--- a/docs/interactive/ask_from
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-
-my $irq=1;
-my $login;
-my $login2="editable";
-my $check;
-my $range=57;
-
-my $in = 'interactive'->vnew(undef, 'default');
-
-$in->ask_from("window title - ask_from",
-	      "message\nexamples of utilisation of ask_from",
-	      [
-	       { label => "enter scalar", val => \$irq },
-	       { label => "combo (type=>combo optionnal)", val => \$login, list => ['Netherlands', 'France', 'Belgium', 'Italy', 'UK'], type => 'combo'},
-	       { label => "choose from list editable and sorted", val => \$login2, list => ['Netherlands', 'France', 'Belgium', 'Italy', 'UK'], not_edit => 0, sort => 1},
-	       { label => "check box", val => \$check, type => "bool", text => "text" },
-	       { label => "range", val => \$range, type => 'range', min => 0, max => 100 },
-	      ],
-	      complete => sub { print "complete\n";print "$irq\n$login\n$range\n"; },
-#	      focus_out => sub { print "focus_out\n"},
-#	      changed => sub { print "changed\n"; },
-	     ) or $in->exit(0);
-$in->exit(0);
diff --git a/docs/interactive/ask_from_list b/docs/interactive/ask_from_list
deleted file mode 100755
index 63c0ee996..000000000
--- a/docs/interactive/ask_from_list
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use common;
-use interactive;
-
-my %l = (
-	 0 => "Welcome To Crackers",
-	 1 => "Poor",
-	 2 => "Low",
-	 3 => "Medium",
-	 4 => "High",
-	 5 => "Paranoid",
-	);
-
-my $in = 'interactive'->vnew(undef, 'default');
-
-my $level = $in->ask_from_list("window title - ask_from_list",
-			       "radio button\nexamples of utilisation of ask_from_list",
-			       [ values %l ], $l{2}
-			      ) or $in->exit(0);
-
-print "$level\n";
-$in->exit(0);
-
diff --git a/docs/interactive/ask_from_listf b/docs/interactive/ask_from_listf
deleted file mode 100755
index 077540b49..000000000
--- a/docs/interactive/ask_from_listf
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-use Data::Dumper;
-
-my $in = 'interactive'->vnew(undef, 'default');
-
-my @m=(
-       { description => "dhcpcd",
-	 c => 1},
-       { description => "dhcpxd",
-	 c => 3},
-       { description => "dhcp-client",
-	 c => 4},
-      );
-my $f = $in->ask_from_listf(_("ask_from_listf"),
-				_("Which dhcp client do you want to use?\nDefault is dhcpcd"),
-				sub { $_[0]{description} },
-				\@m );
-
-print Data::Dumper->Dump([$f],['f']) . "\n";
-
-$in->exit(0);
-
diff --git a/docs/interactive/ask_from_treelist b/docs/interactive/ask_from_treelist
deleted file mode 100755
index ade7141d4..000000000
--- a/docs/interactive/ask_from_treelist
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use common;
-use interactive;
-
-my $in = 'interactive'->vnew(undef, 'default');
-my $foo = $in->ask_from_treelist("window title - ask_from_treelist",
-		       "message\nexamples of utilisation of ask_from_treelist",
-		       '|',
-		       ['Custom',
-			'Other|Unlisted',
-			'Matrox|Millennium II=>Matrox Millennium II',
-			'Matrox|Millennium G200=>Matrox Millennium G200',
-			'Matrox|Millennium G400=>Matrox Millennium G400',
-			'Matrox|Millennium G450=>Matrox Millennium G450',
-			'Matrox|Millennium G550=>Matrox Millennium G550',
-			'Sun|FFB 67MHz Creator=>Sun FFB 67MHz Creator',
-			'Sun|FFB 67MHz Creator 3D=>Sun FFB 67MHz Creator 3D',
-			'Sun|FFB 75MHz Creator 3D=>Sun FFB 75MHz Creator 3D',
-		       ],
-				 'Custom'
-		      ) or $in->exit(0);
-print "$foo\n";
-$in->exit(0);
diff --git a/docs/interactive/wait_message b/docs/interactive/wait_message
deleted file mode 100755
index 0caec4471..000000000
--- a/docs/interactive/wait_message
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-
-my $in = 'interactive'->vnew(undef, 'default');
-my $wait = $in->wait_message('wainting title', _("Moving files to the new partition"));
-sleep(3);
-$wait->set(_("Removing"));
-sleep(3);
-$in->exit(0);
diff --git a/docs/mdk-vs-redhat b/docs/mdk-vs-redhat
deleted file mode 100644
index 4d0de8223..000000000
--- a/docs/mdk-vs-redhat
+++ /dev/null
@@ -1,43 +0,0 @@
-+ Open Development (at least DrakX)
-+ UDMA66 (HPT366)
-+ gamerz
-+ number of packages
-+ better packages(?)
-+ no automatic handling of ide burners
-+ urpmi/rpmdrake
-+ XFdrake
-+ no newbie install
-+ reiserfs
-+ fat resizing
-+ 3D handling (eg: Voodoo3)
-+ diskdrake (vs diskdruid)
-+ usb storage (?)
-+ KDE2
-+ faces in kdm/gdm
-+ menu
-+ alternatives
-+ /etc/emacs/site-start.d
-+ default config
-+ i18n (bootloader keyboard)
-
-+ More user-friendliness in general:
-	+ you can choose between multiple net devices when more than one are
-	detected
-	+ you are presented with the media descriptions (disks, cdrom's)
-	when you must choose between multiple media, and not only "sda",
-	"hdc", ..
-	+ when installing from a disk partition, you are presented with an
-	extract of the directory contents when you fail to give the
-	correct location, which is very helpful to correct the input
-	instead of simply rebooting to remember where on earth you
-	mirrored the distribution on your disks
-
-+ Automatic mode (Redhat's equivalent is called "kickstart") is not
-  performed according to a file on the floppy but from kernel parameters,
-  which have many pros, among them: (1) we don't need the vfat filesystem
-  for that purpose, and (2) with advanced bootloaders such as grub and
-  lilo you can edit parameters on the fly at boot time.
-
-- no LABEL= in fstab (for auto renumbering of devices)
-- kerberos
-- LDAP
diff --git a/docs/net_object_class.fig b/docs/net_object_class.fig
deleted file mode 100644
index 19f7f5318..000000000
--- a/docs/net_object_class.fig
+++ /dev/null
@@ -1,73 +0,0 @@
-#FIG 3.2
-Landscape
-Center
-Inches
-Letter  
-100.00
-Single
--2
-1200 2
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4050 4162 675 338 4050 4162 4725 4500
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 5700 3112 675 338 5700 3112 6375 3450
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 7275 4087 675 338 7275 4087 7950 4425
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4800 1462 975 487 4800 1462 5775 1950
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 2700 3112 675 338 2700 3112 3375 3450
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4875 5887 975 487 4875 5887 5850 6375
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 9450 5062 675 338 9450 5062 10125 5400
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4654 4038 3900 3225 4654 4038 754 813
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4125 1875 3225 2850
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4575 1950 4200 3750
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5250 1950 5475 2775
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 3000 3450 3600 3900
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5925 3450 6675 3900
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 2700 3450 4050 5550
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4125 4500 4575 5400
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5625 3450 5025 5400
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5775 1575 9450 4725
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 7800 4275 9000 4800
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4800 1950 4800 5400
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 9000 975 9450 4725
-2 2 0 1 0 7 50 0 -1 0.000 0 0 -1 0 0 5
-	 7500 75 10687 75 10687 975 7500 975 7500 75
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 7500 375 5400 1050
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5550 1800 7200 3675
-4 0 0 50 0 0 12 0.0000 4 135 885 4350 1500 Netconnect\001
-4 0 0 50 0 0 12 0.0000 4 135 435 2475 3150 ISDN\001
-4 0 0 50 0 0 12 0.0000 4 135 720 3675 4200 MODEM\001
-4 0 0 50 0 0 12 0.0000 4 135 960 6825 4125 ETHERNET\001
-4 0 0 50 0 0 12 0.0000 4 135 480 5400 3150 ADSL\001
-4 0 0 50 0 0 12 0.0000 4 135 420 4650 5925 Tools\001
-4 0 0 50 0 0 12 0.0000 4 135 660 9150 5100 Network\001
-4 0 0 50 0 0 12 0.0000 4 135 1305 8400 375 Rest of the world\001
-4 0 0 50 0 0 12 0.0000 4 180 2595 7725 600 (draknet, printerdrake, tinyfirewall\001
-4 0 0 50 0 0 12 0.0000 4 180 2310 7725 825 ftp, http, net_monitor, drakgw)\001
-4 0 0 50 0 0 12 0.0000 4 195 2760 3525 6825 Global variables $in, $prefix, $install\001
-4 0 0 50 0 0 12 0.0000 4 180 2340 3525 7050 shared with the module globals\001
diff --git a/docs/object_class.fig b/docs/object_class.fig
deleted file mode 100644
index 44fd3fe89..000000000
--- a/docs/object_class.fig
+++ /dev/null
@@ -1,32 +0,0 @@
-#FIG 3.2
-Landscape
-Center
-Inches
-Letter  
-100.00
-Single
--2
-1200 2
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 2625 1200 2625 1725
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 7575 1125 7575 1650
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 7575 2100 4350 3225
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 5025 2025 4350 3225
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 2625 2100 4350 3225
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 5025 2025 6075 4125
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 2625 1200 4950 1725
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 7575 1125 4950 1725
-4 0 0 100 0 0 12 0.0000 4 180 1755 1800 1050 install_steps_gtk\001
-4 0 0 100 0 0 12 0.0000 4 180 1440 6900 975 install_steps_stdio\001
-4 0 0 100 0 0 12 0.0000 4 180 1140 2100 1950 interactive_gtk\001
-4 0 0 100 0 0 12 0.0000 4 180 1275 6900 1950 interactive_stdio\001
-4 0 0 100 0 0 12 0.0000 4 180 1875 4125 1950 install_steps_interactive\001
-4 0 0 100 0 0 12 0.0000 4 135 810 3975 3450 interactive\001
-4 0 0 100 0 0 12 0.0000 4 180 975 5625 4350 install_steps\001
diff --git a/docs/spec-DrakX-8.0.html b/docs/spec-DrakX-8.0.html
deleted file mode 100644
index 3fd545447..000000000
--- a/docs/spec-DrakX-8.0.html
+++ /dev/null
@@ -1,405 +0,0 @@
-<html><head><title>DrakX Specification for Linux-Mandrake 8.0</title></head>
-<body bgcolor="#FFFFFF" link="#0066FF" vlink="#0066FF" alink="#FF0000">
-<table border="0" cellpadding="0" cellspacing="0" width="100%">
-<tr>
-<td bgcolor="#99AAFF"><h2 align="left">DrakX Specification for Linux-Mandrake 8.0</h2></td></tr>
-<tr><td valign="top">
-Current team of Install group is :
-<p>
-<table cellpadding="2" cellspacing="2" border="1" width="30%">
-<tbody>
-<tr valign="Top">
-<td valign="Top">gc
-
-</td>
-</tr>
-<tr valign="Top">
-<td valign="Top">damien
-
-</td>
-</tr>
-<tr valign="Top">
-<td valign="Top">fpons
-
-</td>
-</tr>
-<tr valign="Top">
-<td valign="Top">pixel
-
-</td>
-</tr>
-</tbody>
-</table>
-<p>
-
-<pre>
-
-  <b>Boot process (stage1)</b>
-
-    Installation begin by booting from CD-ROM or Diskette. From CD-ROM all
-installation method are available (CD, HD, NFS, FTP, HTTP) on options. From
-Diskette according to image selected, only some related method (network or cdrom
-or hd) are available and module managed due to size limitation to 1.44Mb.
-    Options are always available by pressing on F1.
-
-  <b>DrakX process (stage2)</b>
-
-    DrakX installation organized in steps (execution sequence described below).
-Steps listed on left side and help available on bottom right side. most of the
-screen is available for various dialog for interacting with the user. Steps
-execution sequence is automated and described below.
-
-Mouse is probed and if none has been found or if the mouse has not moved, a
-specific mouse configuration is displayed at the begining.
-
-
-Before the graphical steps, there is a detection step. It detects various
-hardware, including modems (from tty0 to tty7), mouse (serial, usb, ps/2) and
-tablets.
-
-    <b>Steps</b>
-
-      <i>Choose Your language</i>: step always displayed. default choice is previous one or
-<font color="#000080"><i>English</i></font>. After choosing a language, a license splash screen translated in the
-chosen language is displayed with <font color="#000080"><i>Accept</i></font> and <font color="#000080"><i>Refuse</i></font> buttons. <font color="#000080"><i>Refuse</i></font> should
-stop installation. <font color="#000080"><i>Accept</i></font> validate language choice which are propagated to all
-DrakX visible widget. Advanced mode allow to select other language available to
-be installed. Advanced mode allow to select language which will be installed on
-system.
-      If step is redone, the license is no more displayed.
-
-      <font color="#000080"><i>Select Install Class</i></font>: step always displayed. default choice is previous one
-or <font color="#000080"><i>Recommended</i></font>. Only one other option available is <font color="#000080"><i>Customized</i></font>. Two buttons
-available are <font color="#000080"><i>Install</i></font> or <font color="#000080"><i>Upgrade</i></font>. Available steps (left side) are changed
-according to installation class selected, where the default is the one of
-<font color="#000080"><i>Recommended</i></font> with <font color="#000080"><i>Install</i></font>.
-
-      <font color="#000080"><i>Hard Drive Detection</i></font>: step always displayed. In recommended mode,
-automatically done. In Customized mode, all modules that manage SCSI/IDE cards
-are loaded automatically and a question asking for other module to load is
-displayed.
-      If clicked later or if to the question to load other module the
-answer is <font color="#000080"><i>Yes</i></font>, a list of module is displayed (or if the question to other
-module to load is. When a module is chosen, two options are available
-<font color="#000080"><i>Autoprobe</i></font> and <font color="#000080"><i>Specify options</i></font>. Autoprobe try to load the module without any
-other user options (default module parameter). Specify options allow user to
-give module parameters individually in a list for all known parameters. At this
-point <font color="#000080"><i>Ok</i></font> or <font color="#000080"><i>Cancel</i></font> are available, Cancel should stop the module installation
-and go to next step. If any error occurs during module installation, a question
-asking to try with other parameter is displayed, the same module is still used.
-
-      <font color="#000080"><i>Setup filesystems</i></font>: step always displayed. display a list of available choice
-accoding to what has been probed. May contains <font color="#000080"><i>Use free space</i></font>, "Use existing
-partition<font color="#000080"><i>, </i></font>Use the window partition for loopback<font color="#000080"><i>, </i></font>Use the free space on the
-Windows partition<font color="#000080"><i>, </i></font>Remove Windows(TM)<font color="#000080"><i>|</i></font>Erase entire disk" (according to disk
-configuration =&gt; only one big fat for the first case only), "Custom disk
-partitioning".
-      If <font color="#000080"><i>Use free space</i></font> mode, auto allocation in available on available disk.
-      If <font color="#000080"><i>Use existing partition</i></font> mode, a list of partition named in Linux
-scheme are displayed with their approximate size in Mb and propose mount point
-to choose in list boxes for each partitions available on hard drive.
-      If <font color="#000080"><i>Use the window partition for loopback</i></font> mode, DrakX use available size
-on the windows partition to create a root file and a swap file which will be
-used in loopback, this means this is a lnx4win installation.
-      If <font color="#000080"><i>Use the free space on the Windows partition</i></font> mode, DrakX will resize
-the windows partition and allocate true linux filesystem (at least / and swap).
-      If <font color="#000080"><i>Remove Windows(TM)</i></font>|<font color="#000080"><i>Erase entire disk</i></font> mode, DrakX clean the
-partition table before auto allocating partition.
-      If <font color="#000080"><i>Custom disk partitioning</i></font> mode, diskdrake is launch. TO BE DEFINED to
-change make diskdrake use only advanced mode.
-Diskdrake show all partition of all non-removable disk graphically. All special
-partition are hidden, only user accessible partition are visible: this remove
-extended partition, whole disk partition on sparc platform. Clicking on a disk
-notebook tab show all his partitions. Clicking on a partition show all actions
-available for this partition (depend if customized or advanced mode) as well as
-information on this partition (depend if customized or advanced mode). Most
-diskdrake operation are done without writing on disk (exception are Resizing
-partitions) and everything is written once on the disk when exiting diskdrake,
-at any time if writing partition table is necessary, there are always a dialog
-box asking the user to confirm the write. If no operation are modifying
-partition table, no dialog is displayed on exit (for example if giving mount
-point to partition). General action are available too:
-        <font color="#000080"><i>Clear All</i></font>: clear all partition of the given disk.
-        <font color="#000080"><i>Auto allocate</i></font>: try to allocate partition in available disk (not the
-seen disk).
-        <font color="#000080"><i>Undo</i></font>: undo last operation.
-        <font color="#000080"><i>Done</i></font>: quit and save changes.
-Other operations are available in advanced mode:
-        <font color="#000080"><i>Rescue partition table</i></font>: try to rescue a lost partition table,
-absolutely no garantee to succeed and may destroy what could be saveable by
-another tools.
-        <font color="#000080"><i>Reload</i></font>: reload partition table from disk, erasing all changes in
-memory done by the user.
-        <font color="#000080"><i>Wizard</i></font>: go to partition wizard, that the partition filesystems default
-behaviour on startup.
-        <font color="#000080"><i>Restore from floppy</i></font>: restore a partition table from previously saved
-partition table from diskdrake.
-        <font color="#000080"><i>Save to floppy</i></font>: save partition table to floppy.
-        <font color="#000080"><i>Options</i></font>: global options available for filesystem configuration. This
-include <font color="#000080"><i>Removable media automouting supermount</i></font> check box disabled by default.
-      Operation available on partition are:
-        <font color="#000080"><i>Mount point</i></font>: change or define mount point for partition, only
-available for true filesystem partition.
-        <font color="#000080"><i>Resize</i></font>: resize partition, if a specific algorithm to keep data is
-used no data may be lost, else all data are lost but nothing is written by
-diskdrake on the partition data in this last case (this means data can be
-restored by restoring original size and location).
-        <font color="#000080"><i>Delete</i></font>: delete partition, if the same partition is created (same type,
-location, size) all data can be restored as diskdrake doesn't write on partition
-data.
-      Operation available on partition table but in advanced mode are:
-        <font color="#000080"><i>Type</i></font>: change type of partition, all data will be lost but diskdrake as
-above does not destroy them, and everyting can be restored.
-        <font color="#000080"><i>Format</i></font>: format partition, at this point, all data ARE LOST.
-        <font color="#000080"><i>Mount</i></font>: mount partition now, usefull for swap to increase memory
-capacity for machine low on resource that are not available to complete setup
-filesystem step correctly (problably if a resize partition is used on FAT fs).
-allow Mounting swap on customized mode too.
-      A legend for partition type colors is available
-(Ext2,ReiserFS,Swap,FAT,Other,Empty). It has additionnal features to create a
-partition or change its type (only available in advanced mode).
-
-      <font color="#000080"><i>Format partitions</i></font>: step always displayed. display list of partition to
-format with click boxes. Some are defined according to type of partitions and if
-the partition has been created or taken back.
-If a partition has already been formated, it is not proposed, or if it should
-not be proposed (alrady existing partition like /mnt/windows).
-On Advanced tag, an additional dialog is displayed to select partition to format
-(all available partition listed) and to format them with bad block checking.
-
-      <font color="#000080"><i>Choose packages</i></font>: step always displayed. default selection done to be
-<font color="#000080"><i>correct</i></font> according to size available, Install or Upgrade, Hardware available.
-This selection is done according to <font color="#000080"><i>Mandrake first choice</i></font> of packages.
-On all mode, display groups and main desktop used (KDE or Gnome), an
-individual package selection check box is available to allow selecting package
-individually. In this case, a dialog displaying a tree with groups, (Mandrake
-first choice/alternatives) and packages is shown on the left part, a description
-window for each packages is shown on the right part.
-
-      <font color="#000080"><i>Install system</i></font>: step always displayed. no interactive and display
-installation progression. include if available and on a CD basis a spash screen
-of advertising and other (pub!).
-
-      <font color="#000080"><i>Hardware panel</i></font>: step always displayed. show current configuration for
-Mouse, Keyboard, TimeZone, Graphic/TV Card, Monitor.
-At each values chosen (list boxes displayed a
-synthesis description) the current dialog is removed from screen and specific
-configuration panels are displayed (like currently for mouse, keyboard ...).
-And end of these specific configuration panels, this one is remapped on screen
-to be accepted in general.
-
-      <b>Sub steps of Hardware panel:</b>
-
-        <font color="#000080"><i>Configure mouse</i></font>: displayed on request or if the mouse has not been
-moved (so unsafe detection), but have to be displayed earlier. A mouse tree
-selection for type is displayed with default case as what is probed or
-<font color="#000080"><i>serial/Generic 2 button Mouse</i></font> if none has been probed. <font color="#000080"><i>Cancel</i></font> disable mouse
-modification and <font color="#000080"><i>Ok</i></font> allow next mouse configuration dialog. Then comes a serial
-port dialog for serial mice (default mouse connected to COM1 if nothing found).
-Then a mouse screen control is chown (according to mouse capacity: 3 buttons
-with or without mouse, need 7 buttons checking ?). Here <font color="#000080"><i>Ok</i></font> validate to go to
-next step and <font color="#000080"><i>Cancel</i></font> to first mouse dialog displayed (mouse tree selection for
-type).
-
-        <font color="#000080"><i>Configure keyboard</i></font>: displayed on request. default is set according to
-TimeZone definition (itself defaulting to language selection at the beginning).
-A list of keyboard is shown to the user and <font color="#000080"><i>Ok</i></font> validates change and return to
-<font color="#000080"><i>Hardware panel</i></font> dialog with enabled change. <font color="#000080"><i>Cancel</i></font> abort any modification and
-return to the same <font color="#000080"><i>Hardware panel</i></font> dialog.
-
-        <font color="#000080"><i>Configure timezone</i></font>: displayed on request. default is set according to
-language selection. A timezone tree selection is shown with only the subtree
-corresponding to the current selection expanded (as other tree dialog). <font color="#000080"><i>Ok</i></font>
-validates change and return to <font color="#000080"><i>Hardware panel</i></font> dialog whereas <font color="#000080"><i>Cancel</i></font> avoid
-the change before returning to the same main dialog.
-
-        <font color="#000080"><i>Graphic Card</i></font>: display graphic card probed. No change available.
-
-        <font color="#000080"><i>TV Card</i></font>: display TV/Tuner card probed. No change available.
-
-        <font color="#000080"><i>Monitor</i></font>: need execution of ddcxinfos at this point. Only Size, Max
-resolution and depth displayed. No change available.
-
-
-      Miscellaneous step have been removed and dispatched to other steps. "Use
-hard drive optimisation<font color="#000080"><i> and </i></font>Enable num lock at startup<font color="#000080"><i> are removed. </i></font>Choose
-security level<font color="#000080"><i> is moved to security step. </i></font>Precise RAM size if needed" and
-<font color="#000080"><i>Clean /tmp at each boot</i></font> are moved to bootloader step.
-<font color="#000080"><i>Removable media automouting</i></font> is moved to diskdrake options.
-
-      <font color="#000080"><i>Security</i></font>: step displayed only in customized mode. TO BE DEFINED. should
-display at least securty level to choose. level are <font color="#000080"><i>Low</i></font>, <font color="#000080"><i>Medium</i></font>, <font color="#000080"><i>High</i></font> and
-for advanced there are <font color="#000080"><i>Welcome To Crackers</i></font>, <font color="#000080"><i>Poor</i></font>, <font color="#000080"><i>Paranoid</i></font> too.
-
-      <font color="#000080"><i>Configure networking</i></font>: step always displayed. dialog always displayed in
-both <font color="#000080"><i>Recommended</i></font> and <font color="#000080"><i>Customized</i></font> mode. A list of network configuration
-entries are shown with the following:
-        <font color="#000080"><i>Configure a normal modem connection</i></font>
-        <font color="#000080"><i>Configure an ISDN connection</i></font>
-        "Configure a DSL (or ADSL) connection
-        <font color="#000080"><i>Configure a cable connection</i></font>
-        <font color="#000080"><i>Configure local network</i></font>|<font color="#000080"><i>Reconfigure local network</i></font>
-        <font color="#000080"><i>Disable networking</i></font>|<font color="#000080"><i>Enable networking</i></font>
-        <font color="#000080"><i>Done</i></font>
-      By cliking on a specific item, another dialog is displayed to configure
-some specific part of the network.
-        <font color="#000080"><i>Configure a normal modem connection</i></font>: display a question to probe for a
-modem if not already detected, then if none are found or probe has been refused
-a list of possible serial device are listed (in the form ttySx / COM(x+1) with
-the current mouse device removed if it is serial). After that a dialog including
-all parameters than can be used is shown. This includes <font color="#000080"><i>Connection Name</i></font>,
-<font color="#000080"><i>Phone number</i></font>, <font color="#000080"><i>Login ID</i></font>, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Authentication</i></font>, <font color="#000080"><i>Domain name</i></font>, <font color="#000080"><i>DNS 1</i></font>
-and <font color="#000080"><i>DNS 2</i></font>. Authentication is a combo of <font color="#000080"><i>PAP</i></font>, <font color="#000080"><i>Termina-Based</i></font> and
-<font color="#000080"><i>Script-Based</i></font> (It seems necessary to get CHAP back on this one, no way of
-testing TO BE DEFINED). If no DNS are given, the connection is configured to try
-using provider DNS. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> button are available.
-        <font color="#000080"><i>Configure an ISDN connection</i></font>:
-Try to detect some PCI card. If not detected, asks if it's a ISA/pcmcia or PCI
-card, and gives the list of the cards. Information are then asked: 
-<font color="#000080"><i>Card IRQ</i></font> only if ISA/pcmcia
-<font color="#000080"><i>Card mem (DMA)</i></font> only if ISA/pcmcia
-<font color="#000080"><i>Card IO</i></font> only if ISA/pcmcia
-<font color="#000080"><i>Card IO_0</i></font> only if ISA/pcmcia with io0
-<font color="#000080"><i>Card IO_1</i></font> only if ISA/pcmcia with io1
-<font color="#000080"><i>Your personal phone number</i></font> phone
-<font color="#000080"><i>Provider name (ex provider.net)</i></font>
-<font color="#000080"><i>Provider phone number</i></font>
-<font color="#000080"><i>Provider dns 1</i></font>
-<font color="#000080"><i>Provider dns 2</i></font>
-<font color="#000080"><i>Dialing mode</i></font> auto or manual
-<font color="#000080"><i>Account Login (user name)</i></font>
-<font color="#000080"><i>Account Password</i></font> hided
-<font color="#000080"><i>Confirm Password</i></font> again
-        <font color="#000080"><i>Configure a DLS (or ADSL) connection</i></font>:
-The user chooses between pptp, pppoe and dhcp. If dhcp, redirection to LAN.
-If there is more than one ethernet card, The user must choose the card to use
-(displayed with the module). After that, some informations are asked:
-<font color="#000080"><i>Provider name (ex provider.net)</i></font>
-<font color="#000080"><i>Provider dns 1</i></font>
-<font color="#000080"><i>Provider dns 2</i></font>
-<font color="#000080"><i>Account Login (user name)</i></font>
-<font color="#000080"><i>Account Password</i></font> hided
-<font color="#000080"><i>Confirm Password</i></font> again
-        <font color="#000080"><i>Configure a cable connection</i></font>: redirection to LAN
-        <font color="#000080"><i>Configure local network</i></font>: display what has been probed with a question
-about using another module and <font color="#000080"><i>Yes</i></font>, <font color="#000080"><i>No</i></font> and <font color="#000080"><i>See hardware info</i></font> buttons.
-<font color="#000080"><i>No</i></font> is the default. If <font color="#000080"><i>Yes</i></font> is clicked a list of modules is displayed with
-<font color="#000080"><i>Ok</i></font> or <font color="#000080"><i>Cancel</i></font> buttons available. <font color="#000080"><i>Cancel</i></font> should go back to previous
-question. If <font color="#000080"><i>See hardware info</i></font> is clicked a list of probed hardware is
-displayed. If <font color="#000080"><i>Yes</i></font> is clicked, for each ethernet interface, a dialog asking for
-IP address, Netmask and Automatic IP check box (DHCP/BOOTP) is displayed. Then
-if DHCP has been chosen, only a dialog asking for Host name and another for HTTP
-proxy and FTP proxy if any. If DHCP has not been chosen, an IP address has to be
-defined and a dialog including <font color="#000080"><i>Host name</i></font>, <font color="#000080"><i>DNS server</i></font>, <font color="#000080"><i>Gateway</i></font> and "Gateway
-device" is displayed. Then the same HTTP proxy and FTP proxy dialog as above. As
-network configuration may to have been reworked a bit it has TO BE DEFINED if
-this is kept like that or not.
-        <font color="#000080"><i>Disable networking</i></font>|<font color="#000080"><i>Enable networking</i></font> is just a way to toggle
-networking on or off, may be to be accessible only for advanced mode.
-        <font color="#000080"><i>Quit</i></font> exit the network step.
-
-<b>NETWORK ADVANCED DOCUMENTATION:</b>
-Here is a list of entry points available in post install without using the ugly
-install graphic toolkit:
-
-<a href=<font color="#000080"><i>http://www.mandrakesoft.com/~damien/html/draknet_advanced_doc.txt</i></font>>http://www.mandrakesoft.com/~damien/html/draknet_advanced_doc.txt</a>
-
-      <font color="#000080"><i>Configure Printer</i></font>: step always displayed. In recommended mode, only
-activated if a local printer is detected, else no printer are configured by
-default. In customized mode or if the step has been clicked a list of printer
-already configured is displayed and the possibility to add or exit the
-configuration. It allow configuration of printers for both LPR and CUPS
-individually (available by advanced mode when adding a printer). Printer
-protocol managed are local/usb/samba/ncp/lpd for LPR and
-local/usb/serial/samba/lpd/cups_network for CUPS.
-
-      <font color="#000080"><i>Set root password</i></font>: step always displayed for Install only. In
-recommended mode display only a <font color="#000080"><i>Password</i></font> entry and a <font color="#000080"><i>Password (again)</i></font> entry
-to select the root password. In advanced mode, a Use NIS (yellow pages) check
-boxes and Use MD5 check box are available. <font color="#000080"><i>Ok</i></font> validate root password and "No
-password<font color="#000080"><i> avoid setting a password. </i></font>No password<font color="#000080"><i> is only available in </i></font>Low"
-security level or less. The length of the minimal password depend upon security level.
-
-In corporate firewall :
-      <font color="#000080"><i>Set admin password</i></font>: step always displayed for Install only. It only
-      displays a <font color="#000080"><i>Password</i></font> entry and a <font color="#000080"><i>Password (again)</i></font> entry
-to select the admin password. 
-The length of the minimal password depend upon security level. (double of the
-      security level)
-
-      <font color="#000080"><i>Add a user</i></font>: step always displayed for Install Only. In recommend mode
-display <font color="#000080"><i>Real name</i></font>, <font color="#000080"><i>User name</i></font>, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Password (again)</i></font> and icon
-choices as graphical. For customized mode a shell combo is available to choose a
-specific shell for the user depending on the package installed. The real name is
-the user friendly name of the user whereas user name is its login id name. The
-box display user that have already been added below the title. <font color="#000080"><i>Accept user</i></font>
-button allow the creation of the user and <font color="#000080"><i>Done</i></font> finish this step. High or
-higher security level implies the creation of at least one user. Password length
-are subject to same restriction according to security level. In advanced mode,
-allow to choose the user in auto login mode.
-
-      <font color="#000080"><i>Create a boot disk</i></font>: step always displayed. In recommended mode this
-step is automatically done by doing nothing. If clicked or customized mode, the
-user is prompted to allow building a boot disk (default is yes). In advanced
-mode allow selection of floppy drive.
-
-      <font color="#000080"><i>Install boot loader</i></font>: step always displayed. In recommended mode this
-step is automatically done. In customized mode, a combo <font color="#000080"><i>Boot device</i></font> list the
-various boot device that can be used where the bootloader can be installed. The
-boot device can the Linux description of the whole disk available (ex: /dev/hda)
-or partition available in these disk or floppy drives. Other platform
-specificity are not listed here.
-      LBA check box is displayed in advanced mode (enabled by default) to
-allow using LBA addressing if available (PC with LILO). bootloader combo to
-select a given bootloader to use, available choice are <font color="#000080"><i>Grub</i></font>, "LILO with text
-menu<font color="#000080"><i>, </i></font>LILO with graphical menu<font color="#000080"><i>. default chosen is </i></font>LILO
-with graphical menu<font color="#000080"><i>. </i></font>Delay before booting default image" entry
-field is available with default value current setting (upgrade) or 5 else.
-<font color="#000080"><i>Precise RAM size if needed (found xx MB)</i></font> entry is displayed too,
-<font color="#000080"><i>clean /tmp</i></font> check box is disabled by default too.
-Boot in graphical mode (init 5) is available here in advanced mode too
-(previously in X configuration). <font color="#000080"><i>Video mode</i></font> combo, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Password (again)</i></font>,
-<font color="#000080"><i>Restrict command line options</i></font> check box is displayed.
-Video mode combo list text mode and video mode used for frame buffer, video mode
-used for frame buffer are available only if the install managed to boot with
-frame buffer activated. Password are restricted according to security level as
-other password. Password are mandatory according to security level TO BE DEFINED.
-
-      <font color="#000080"><i>Configure X</i></font>: step always displayed. By default on recommended mode,
-everything is done automatically if possible up to test of graphic card, and if
-the user accept the settings no more question are asked to him. In customized
-mode a dialog is displayed to choose resolution, color depth and which version
-of XFree (with 3D optionally) is available for the current card where only a
-short description is displayed. <font color="#000080"><i>Ok</i></font> button allow to jump to test phase (for the
-first time only) if available. <font color="#000080"><i>Cancel</i></font> return to main XFree configuration
-window allowing to change Monitor, Graphic card, Server options or Resolution
-with X version to choose. <font color="#000080"><i>Show all</i></font> extend resolution list to more resolutions
-according to card (with onboard memory) only and no more monitor capabilities.
-      The main dialog is a list of command to change some X configuration aspect
-according to advanced mode or not :
-        <font color="#000080"><i>Change Monitor</i></font>: display a tree selection of monitors where default one
-is selected. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> buttons are available.
-        <font color="#000080"><i>Change Graphic card</i></font>: display a tree selection of graphic card where
-default one is selected. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> buttons are available. If <font color="#000080"><i>Unlisted</i></font>
-is chosen, then a tree of server/driver is displayed containing available server
-for XF3 or driver for XF4. <font color="#000080"><i>Cancel</i></font> return to main window and <font color="#000080"><i>Ok</i></font> validates
-change.
-        <font color="#000080"><i>Change Server options</i></font>: available only in advanced mode. display list
-of check boxes options for server currently used. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> available.
-        <font color="#000080"><i>Change Resolution</i></font>: change resolution and depth including with X server
-version chosen (relative to Xdrakres too).
-        <font color="#000080"><i>Show Information</i></font>: display an information dialog showing current
-configuration internals of X.
-        <font color="#000080"><i>Test again</i></font>: restart test with current configuration of X.
-        <font color="#000080"><i>Quit</i></font>: exit X configuration main window. Other question about autologin
-and window manager to use are asked on Add user step.
-
-      <font color="#000080"><i>Exit install</i></font>: step displayed only in customized mode but always
-executed. Only a text is displayed with a <font color="#000080"><i>Ok</i></font> button. If clicked and some step
-have not been executed/completed correctly, a question dialog ask the user if he
-really want to quit now, default answer is <font color="#000080"><i>No</i></font>. Advanced switch let user access
-to do the previously <font color="#000080"><i>Auto install floppy</i></font> step in DrakX &lt; 8.0. This is just a
-question asking the user to generate an auto install floppy automatically.
-</pre>
-</body>
-</html>
diff --git a/docs/wizard.doc b/docs/wizard.doc
deleted file mode 100644
index 0bbf8d254..000000000
--- a/docs/wizard.doc
+++ /dev/null
@@ -1,31 +0,0 @@
-How to handle wizard?
-
-to switch in wizard mode:
-set $::isWizard to true;
-if $::Wizard_no_previous is set to true, the wizard won't display the previous button. Usefull for first step
-if $::Wizard_finished is set to true, the wizard will display Finish instead of Next. Usefull for last step
-
-how to code:
-Code as if there were no wizard.
-OK button is displayed as Next
-Cancel is displayed as Previous
-a additional button Cancel is added, xhich die with the exception 'wizard_cancelled'
-
-You have to handle the previous button. For example:
-
-step 1:
-ask_from list( blablablabl) or return;
-step2:
-ask_from list( blablablabl) or goto step1;
-step3:
-ask_from list( blablablabl) or goto step2;
-
-etc... You don't have to handle the wizard Cancel button as it send an exception.
-
-Understood? If yes, you'll see that there is a pb with ask_yesorno. In this case, yes+next returns true, no+next returns false, Cancel send the exception 'wizard_canceled' and previous send the exception 'wizard previous'. So you have to handle the previous button manually.
-
-plop.
-
-dam's, pour vous servir
-
-
diff --git a/kernel/.cvsignore b/kernel/.cvsignore
deleted file mode 100644
index 827e0ba13..000000000
--- a/kernel/.cvsignore
+++ /dev/null
@@ -1,3 +0,0 @@
-modules.description
-all.modules
-all.kernels
diff --git a/kernel/Makefile b/kernel/Makefile
deleted file mode 100644
index 90fad04b6..000000000
--- a/kernel/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-all: all.modules
-
-all.modules: ../mdk-stage1/mar/mar update_kernel list_modules.pm
-	`../tools/specific_arch ./update_kernel`
-
-../mdk-stage1/mar/mar:
-	make -C `dirname $@`
-
-clean:
-	rm -rf *~ modules.description all.modules all.modules64
-
-check:
-	perl modules.pl check > /dev/null
diff --git a/kernel/check_mar.pl b/kernel/check_mar.pl
deleted file mode 100755
index 556a0e442..000000000
--- a/kernel/check_mar.pl
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/usr/bin/perl
-
-use MDK::Common;
-
-my $mar = '../mdk-stage1/mar/mar';
--x $mar or die "ERROR: Sorry, need $mar binary\n";
-
-my %sanity_check = (
-    hd => [ 
-	qw(aic7xxx sym53c8xx initio), 
-	if_(arch() !~ /ppc/, 'advansys'),
-    ],
-    network => [ 
-	qw(3c59x eepro100 tulip via-rhine ne2k-pci 8139too), 
-	if_(arch() !~ /ppc/, 'e100'), 
-	if_(arch() !~ /ppc|ia64/, 'tlan'),
-    ],
-);
-
-my $main_version = chomp_(cat_("all.kernels/.main"));
-
-foreach (keys %sanity_check) {
-    my $marfile = "all.modules/$main_version/${_}_modules.mar";
-    -e $mar or die "ERROR: missing $marfile\n";
-
-    my @l = map { /(\S+)\.o/ } `$mar -l $marfile`;
-    my @pbs = difference2($sanity_check{$_}, \@l);
-
-    @pbs and die "ERROR: sanity check should prove that " . join(" ", @pbs) . "be part of $marfile\n";
-}
diff --git a/kernel/list_modules.pm b/kernel/list_modules.pm
deleted file mode 100644
index 48929f95e..000000000
--- a/kernel/list_modules.pm
+++ /dev/null
@@ -1,186 +0,0 @@
-package list_modules;
-
-use MDK::Common;
-
-our @ISA = qw(Exporter);
-our @EXPORT = qw(load_dependencies dependencies_closure category2modules module2category sub_categories);
-
-# the categories have 2 purposes
-# - choosing modules to include on stage1's (cf update_kernel and mdk-stage1/pci-resource/update-pci-ids.pl)
-# - performing a load_category or probe_category (modules.pm and many files in perl-install)
-
-our %l = (
-  ################################################################################
-  network => 
-  {
-    main => [
-      if_(arch() =~ /ppc/, qw(mace bmac gmac)),
-      if_(arch() =~ /^sparc/, qw(myri_sbus sunbmac sunhme sunqe)),
-      if_(arch() !~ /alpha/ && arch() !~ /sparc/,
-        qw(3c501 3c503 3c505 3c507 3c509 3c515), # 3c90x
-        qw(82596 abyss ac3200 acenic aironet4500_card at1700 atp com20020-pci),
-        qw(cs89x0 de600 de620),
-        qw(defxx), # most unused
-        qw(depca dgrs dmfe e100 e1000 e2100 eepro eepro100 eexpress epic100 eth16i),
-        qw(ewrk3 hamachi hp hp-plus hp100 ibmtr),
-        qw(lance natsemi ne ne2k-pci ni5010 ni52 ni65 olympic pcnet32 plip rcpci), #old_tulip 
-        qw(sb1000 sis900 sk98lin smc-ultra smc9194 starfire tlan tmspci tulip via-rhine), #sktr 
-        qw(wd winbond-840 yellowfin ns83820),
-      ),
-      qw(3c59x 8139too sundance dl2k), #rtl8139 
-    ],
-    raw => [
-      qw(8390 mii),
-      qw(ppp_generic ppp_async slhc aironet4500_core),
-    ],
-    pcmcia => [ 
-      qw(3c574_cs 3c589_cs airo airo_cs aironet4500_cs axnet_cs fmvj18x_cs),
-      qw(ibmtr_cs netwave_cs nmclan_cs pcnet_cs ray_cs smc91c92_cs wavelan_cs wvlan_cs),
-      qw(xirc2ps_cs xircom_cb xircom_tulip_cb),
-    ],
-    usb => [ 
-      qw(pegasus kaweth usbnet catc CDCEther),
-    ],
-    isdn => [
-      qw(hisax hysdn b1pci t1pci c4),
-    ],
-  },
-
-  ################################################################################
-  disk => 
-  {
-    scsi => [
-      if_(arch() =~ /ppc/, qw(mesh mac53c94)),
-      if_(arch() =~ /^sparc/, qw(qlogicpti)),
-      if_(arch() !~ /alpha/ && arch() !~ /sparc/,
-        qw(3w-xxxx AM53C974 BusLogic NCR53c406a a100u2w advansys aha152x aha1542 aha1740),
-        qw(atp870u dc395x_trm dtc fdomain g_NCR5380 in2000 initio pci2220i psi240i),
-        qw(qla1280 qla2x00 qlogicfas qlogicfc),
-        qw(seagate sim710 sym53c416 t128 tmscsim u14-34f ultrastor wd7000),
-        qw(eata eata_pio eata_dma),
-      ),
-      '53c7,8xx',
-      qw(aic7xxx pci2000 qlogicisp sym53c8xx), # ncr53c8xx
-    ],
-    hardware_raid => [
-      if_(arch() =~ /^sparc/, qw(pluto)),
-      if_(arch() !~ /alpha/ && arch() !~ /sparc/,
-        qw(DAC960 dpt_i2o megaraid aacraid ataraid cciss cpqarray gdth i2o_block),
-        qw(ips ppa imm),
-      ),
-    ],
-    pcmcia => [ qw(aha152x_cs fdomain_cs nsp_cs qlogic_cs ide-cs) ], #ide_cs
-    raw => [ qw(scsi_mod sd_mod) ],
-    usb => [ qw(usb-storage) ],
-    cdrom => [ qw(ide-cd sr_mod cdrom) ],
-  },
-
-  ################################################################################
-
-  bus => 
-  {
-    usb => [ qw(usbcore usb-uhci usb-ohci ehci-hcd usbkbd keybdev input) ],
-    pcmcia => [
-      if_(arch() !~ /^sparc/, qw(pcmcia_core tcic ds i82365 yenta_socket)), # cb_enabler
-    ],
-   #serial_cs
-   #ftl_cs 3c575_cb apa1480_cb epic_cb serial_cb tulip_cb iflash2+_mtd iflash2_mtd
-   #cb_enabler
-  },
-
-  fs => 
-  {
-    network => [ qw(af_packet nfs lockd sunrpc) ],
-    cdrom => [ qw(isofs) ],
-    loopback => [ qw(isofs loop) ],
-    local => [
-      if_(arch() =~ /^i.86/, qw(vfat fat)),
-      if_(arch() =~ /^ppc/, qw(hfs)),
-      qw(reiserfs),
-    ],
-    various => [ qw(smbfs romfs jbd xfs) ],
-
-  },
-
-  ################################################################################
-  multimedia => 
-  {
-    sound => [
-      if_(arch() =~ /ppc/, qw(dmasound_awacs)),
-      if_(arch() !~ /^sparc/,
-        qw(cmpci cs46xx cs4281 es1370 es1371 esssolo1 i810_audio maestro maestro3),
-        qw(nm256_audio pas16 trident via82cxxx_audio sonicvibes emu10k1 ymfpci),
-
-        qw(snd-ice1712 snd-cmipci snd-ens1371),
-        qw(snd-es1938 snd-fm801 snd-intel8x0 snd-rme96),
-        qw(snd-trident snd-ymfpci),
-      ),
-    ],
-    tv => [ qw(bttv cpia_usb ibmcam mod_quickcam ov511 ultracam usbvideo) ],
-    photo => [ qw(dc2xx mdc800) ],
-    radio => [ qw(radio-maxiradio) ],
-    scanner => [ qw(scanner microtek) ],
-    joystick => [ qw(ns558) ],
-  },
-
-  various => 
-  # just here for classification, unused categories (nor auto-detect, nor load_thiskind)
-  {
-    raid => [
-      qw(linear raid0 raid1 raid5 lvm-mod md multipath xor),
-    ],
-    mouse => [
-      qw(busmouse msbusmouse logibusmouse serial qpmouse atixlmouse),
-    ],
-    char => [
-      qw(amd768_rng applicom n_r3964 nvram pc110pad ppdev amd768_pm),
-    ],
-    other => [
-      qw(agpgart defxx i810_rng i810fb ide-floppy ide-scsi ide-tape loop lp nbd sg st parport parport_pc),
-    ],
-  },
-);
-
-my %dependencies;
-
-sub load_dependencies {
-    my ($file) = @_;
-
-    %dependencies = map {
-	my ($f, $deps) = split ':';
-	$f => [ split ' ', $deps ];
-    } cat_($file);
-}
-
-sub dependencies_closure {
-    my @l = map { dependencies_closure($_) } @{$dependencies{$_[0]} || []};
-    (@l, $_[0]);
-}
-
-sub category2modules {
-    map {
-	my ($t1, $t2s) = m|(.*)/(.*)|;
-	map { 
-	    my $l = $l{$t1}{$_} or die "bad category $t1/$_\n" . backtrace();
-	    @$l;
-	} split('\|', $t2s);
-    } split(' ', $_[0]);
-}
-
-sub module2category {
-    my ($module) = @_;
-    foreach my $t1 (keys %l) {
-	my $h = $l{$t1};
-	foreach my $t2 (keys %$h) {
-	  $module eq $_ and return "$t1/$t2" foreach @{$h->{$t2}};
-      }
-    }
-    return;
-}
-
-sub sub_categories {
-    my ($t1) = @_;
-    keys %{$l{$t1}};
-}
-
-1;
diff --git a/kernel/modules.pl b/kernel/modules.pl
deleted file mode 100644
index 067c47386..000000000
--- a/kernel/modules.pl
+++ /dev/null
@@ -1,137 +0,0 @@
-use strict;
-
-
-BEGIN {
-    #- for testing purpose
-    (my $f = __FILE__) =~ s|/[^/]*$||;
-    push @INC, $f;
-}
-
-use MDK::Common;
-use list_modules;
-
-
-my @skip_big_modules_on_stage1 = (
-qw(
-olympic
-sk98lin acenic
-3c90x
-ns83820
-aironet4500_card aironet4500_core com20020-pci hamachi starfire winbond-840
-
-dc395x_trm
-BusLogic seagate fdomain g_NCR5380
-)
-);
-
-my @skip_modules_on_stage1 = (
-  qw(sktr tmspci ibmtr abyss), # alt token ring
-  qw(old_tulip rtl8139),
-  if_(arch() =~ /alpha|ppc/, qw(sb1000)),
-  "apa1480_cb",
-  "imm",
-  "ppa",
-  "plip",
-  qw(3w-xxxx pci2220i qla2x00 i2o_block),
-  qw(eata_pio eata_dma),
-  'AM53C974', # deprecated by tmscsim
-  qw(ac3200 at1700 atp ni5010 ni52 ni65),  #- unused from Jeff
-  "u14-34f", #- duplicate from ultrastor.o
-);
-
-my %images = (
-    network => 'fs/network network/main|raw bus/pcmcia',
-    cdrom   => 'fs/cdrom disk/cdrom|scsi|raw',
-    hd      => 'fs/local fs/loopback disk/scsi|hardware_raid|raw',
-    usb     => 'fs/network|cdrom bus/usb network/usb|raw disk/cdrom|usb|raw',
-    pcmcia  => 'fs/network|cdrom disk/cdrom|pcmcia|raw bus/pcmcia network/pcmcia|raw',
-    other   => 'network/main disk/scsi|hardware_raid ONLY_BIG fs/network network/raw fs/cdrom disk/cdrom|raw',
-    all     => 'fs/network|cdrom|loopback|local bus/pcmcia|usb network/main|pcmcia|usb|raw disk/cdrom|scsi|hardware_raid|pcmcia|usb|raw',
-);
-
-my $verbose = "@ARGV" =~ /-v/;
-images() if "@ARGV" =~ /images/;
-check() if "@ARGV" =~ /check/;
-pci_modules4stage1($1) if "@ARGV" =~ /pci_modules4stage1:(.*)/;
-
-sub images {
-    load_dependencies('modules.dep');
-
-    while (my ($image, $l) = each %images) {
-	my @modules;
-	foreach (split(' ', $l)) { 
-	    if (/ONLY_BIG/) {
-		@modules = intersection(\@modules, \@skip_big_modules_on_stage1);
-		next;
-	    }
-	    push @modules, category2modules($_);
-	}
-
-	@modules = difference2(\@modules, \@skip_modules_on_stage1);
-	if ($image !~ /other|all/) {
-	    @modules = difference2(\@modules, \@skip_big_modules_on_stage1)
-	}
-	@modules = map { dependencies_closure($_) } @modules;
-	printf qq(%s_modules="%s"\n), $image, join(" ", map { "$_.o" } sort @modules);
-    }
-}
-
-sub pci_modules4stage1 {
-    print "$_\n" foreach difference2([ category2modules($_[0]) ], \@skip_modules_on_stage1);
-}
-
-sub check {
-    my $error;
-    my %listed;
-    my %big_modules_categories;
-    while (my ($t1, $l) = each %list_modules::l) {
-	while (my ($t2, $l) = each %$l) {
-	    ref $l or die "bad $l in $t1/$t2";
-	    print "MODULE: $_\n" foreach @$l;
-	    foreach (@$l) {
-		$listed{$_} = 1; 
-		push @{$big_modules_categories{$t1}{$t2}}, $_ if member($_, @skip_modules_on_stage1);
-	    }
-	}
-    }
-
-    # remove accepted categories for other.img
-    delete $big_modules_categories{disk}{hardware_raid};
-    delete $big_modules_categories{disk}{scsi};
-    delete $big_modules_categories{network}{main};
-
-    if (map { %$_ } values %big_modules_categories) {
-	my @l = map { "$_/" . join('|', sort keys %{$big_modules_categories{$_}}) } sort keys %big_modules_categories;
-	print STDERR "WEIRD CATEGORIES USED FOR other.img: ", join(" ", @l), "\n";
-	if ($verbose) {
-	    while (my ($t1, $t2s) = each %big_modules_categories) {
-		print "$t1/$_ used for other.img: ", join(" ", @{$t2s->{$_}}), "\n" foreach keys %$t2s;
-	    }
-	}
-	$error = 1;
-    }
-
-    my %deprecated_modules = %listed;
-    my $not_listed = sub {
-	my ($msg, $verbose, @l) = @_;
-	my %not_listed;
-	foreach (@l) {
-	    my ($mod) = m|([^/]*)\.o(\.gz)?$| or next;
-	    delete $deprecated_modules{$mod};
-	    next if $listed{$mod};
-	    s|.*?mdk(BOOT)?/||;
-	    s|kernel/||; s|drivers/||; s|3rdparty/||;
-	    $_ = dirname $_;
-	    $_ = dirname $_ if $mod eq basename($_);
-	    push @{$not_listed{$_}}, $mod;
-	}
-	if ($verbose) {
-	    print "$msg $_: ", join(" ", @{$not_listed{$_}}), "\n" foreach sort keys %not_listed;
-	}
-    };
-    $not_listed->('NOT LISTED', 1, `cd all.kernels/2.4* ; find -name "*.o" -o -name "*.o.gz"`);
-    $not_listed->('not listed', $verbose, `rpm -qpl /RPMS/kernel-2.4*`);
-    print "bad/old modules : ", join(" ", sort keys %deprecated_modules), "\n" if %deprecated_modules;
-
-    exit $error;
-}
diff --git a/kernel/update_kernel b/kernel/update_kernel
deleted file mode 100755
index fa9600490..000000000
--- a/kernel/update_kernel
+++ /dev/null
@@ -1,94 +0,0 @@
-#!/bin/bash
-
-ALL_KERNELS="all.kernels"
-
-function create_marfile() {
-    marfile=$1
-    shift
-    $GIBASEDIR/mdk-stage1/mar/mar -c $marfile $*
-}
-
-function create_modules() {
-    kernel_path=$1
-    kern=$2
-    echo "Updating modules in '`pwd`' for kernel '$kern'"
-    cp -f `find $kernel_path/lib/modules/ -name "*.o"` .
-    /sbin/depmod -F $kernel_path/boot/System.map* -e *.o | perl -pe 's/\\\n//' \
-	| perl -ne 's/\.o//g; s/[ \t]+/ /g; print if /: /' > modules.dep
-    perl -pi -e 's/((plip|ppa|imm): parport)/$1 parport_pc/' modules.dep
-
-    /sbin/modinfo -f '%{filename} %{description}\n' *.o | perl -lne 'print "$1\t$2" if /(.*?)\.o "(.*)"/' > modules.description
-
-    echo -n "packdrake $kern: "
-    ls *.o | packdrake -b9s "modules.cz" 400000
-    echo "done"
-    mv modules.cz ../modules.cz-$kern
-    for i in network cdrom hd usb other pcmcia all; do
-	modules_var="${i}_modules"
-	eval "create_marfile ${i}_modules.mar \$$modules_var"
-    done
-    echo
-}
-
-[ -e $ALL_KERNELS/.main ] && main=$(cat $ALL_KERNELS/.main)
-
-rpm=$(rpm -qp --qf '%{name}' /RPMS/kernel-BOOT-*.rpm | perl -pe 's/kernel-BOOT-(.*)\.(.*)/$1-${2}BOOT/')
-if [ -n "$rpm" -a ! -e $ALL_KERNELS/$rpm ]; then
-    [ -n "$main" ] && rm -rf $ALL_KERNELS/$main
-    cd $ALL_KERNELS
-    rm -rf $rpm ; mkdir $rpm
-    cd $rpm
-    rpm2cpio /RPMS/kernel-BOOT-*.rpm | cpio -id
-    find -type f -name "*.o.gz" | xargs gunzip
-    cd ../..
-
-    for dir in /tftpboot /var/lib/tftpboot; do
-	rm -f $dir/{vmlinuz,network.rdz}
-    done
-fi 
-
-[ -n "$main" -a -e $ALL_KERNELS/$main ] || {
-    cd $ALL_KERNELS
-    main=$(echo 2.* | sed 's/.* //')
-    echo "Choosing $main"
-    echo $main > .main
-    cd ..
-}
-
-ARCH=`uname -m | sed -e 's/i.86/i386/' -e 's/sparc.*/sparc/'`
-
-eval `perl modules.pl images`
-
-if [ "$ARCH" == "i386" ]; then
-    for i in $ALL_KERNELS/*/boot/vmlinuz*; do
-	#disable any existing resolution!!!
-	/usr/sbin/rdev -v $i 65535 #788 #785 
-    done
-else
-    if [ "$ARCH" == "ppc" ]; then
-        cp -f "$KERNEL_BOOT_PATH"/boot/vmlinux .
-    else
-        cp -f "$KERNEL_BOOT_PATH"/boot/vmlinux.gz .
-    fi
-fi
-
-
-GIBASEDIR=`pwd`/..
-
-rm -rf all.modules ; mkdir all.modules
-for i in $ALL_KERNELS/*; do
-	kern=`basename $i`
-	(
-	    mkdir all.modules/$kern
-	    cd all.modules/$kern
-	    if [ "$kern" = "$main" ]; then
-		create_modules ../../$i $kern
-	    else
-		echo "$kern ($main)"
-		create_modules ../../$i $kern 2>/dev/null
-	    fi
-	) || exit 1
-done
-cp -f all.modules/$main/modules.description .
-
-./check_mar.pl
diff --git a/live_update b/live_update
deleted file mode 100644
index 0778b4ae8..000000000
--- a/live_update
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/bin/sh
-
-message=/usr/X11R6/bin/gmessage
-[ -x $message ] || message=/usr/X11R6/bin/xmessage
-[ -x $message ] || unset message
-
-if [ "$UID" -ne 0 ]; then
-    if [ -x "$message" ]; then
-	case "$LANG" in
-	    fr*) buttons="Arr�ter:0"
-		 msg="Mise � jour en direct de Mandrake Linux.
-
-Vous devez �tre l'utilisateur root pour lancer cette application." ;;
-	    *) buttons="Abort:0"
-	       msg="Mandrake Linux live upgrade.
-
-You need to be root to start this program." ;;
-	esac
-	$message -buttons "$buttons" -print "$msg"
-    else
-	echo >&2 "You need to be root to start this program."
-    fi
-    exit 3
-fi
-
-distrib=`pwd`;
-if [ ! -x "$distrib/Mandrake/mdkinst/usr/bin/perl-install/live_install" ]; then
-    distrib="/mnt/cdrom"
-fi
-if [ ! -x "$distrib/Mandrake/mdkinst/usr/bin/perl-install/live_install" ]; then
-    if [ -x "$message" ]; then
-	case "$LANG" in
-	    fr*) buttons="Arr�ter:0"
-		 msg="Mise � jour en direct de Mandrake Linux.
-
-Impossible de trouver le C�d�rom d'installation de Mandrake Linux dans le premier lecteur." ;;
-	    *) buttons="Abort:0"
-	       msg="Mandrake Linux live upgrade.
-
-Unable to find Mandrake Linux Installation Cd-Rom in the first drive." ;;
-	esac
-	$message -buttons "$buttons" -print "$msg"
-    else
-	echo >&2 "Unable to find Mandrake Linux Installation Cd-Rom in the first drive."
-    fi
-    exit 2
-fi
-
-if [ -x "$message" ]; then
-    case "$LANG" in
-	fr*) buttons="Mise � jour:0,Annuler:1"
-	     msg="Mise � jour en direct de Mandrake Linux.
-
-Appuyez sur \"Mise � jour\" pour lancer la mise � jour de votre syst�me,
-cela prendra quelques minutes avant que l'�cran de DrakX apparaisse.
-
-Appuyez sur \"Annuler\" pour ne pas mettre � jour votre syst�me de cette mani�re." ;;
-	*) buttons="Upgrade:0,Cancel:1"
-	   msg="Mandrake Linux live upgrade.
-
-Press \"Upgrade\" to start live upgrade on your system, note this will
-take some time to prepare the system before DrakX screen appears.
-
-Press \"Cancel\" to avoid upgrading your system this way." ;;
-    esac
-    default=`echo $buttons | cut -d: -f1`
-    $message -buttons "$buttons" -default "$default" -print "$msg"
-    [ $? -ne 0 ] && exit 1
-else
-    echo >&2 "Press ENTER to start live upgrade on your system, note this will
-take some time to prepare the system before DrakX screen appears.
-
-Press CTRL-C to avoid upgrading your system this way."
-fi
-
-cd "$distrib/Mandrake/mdkinst/usr/bin/perl-install" && exec ./live_install
-exit 2
diff --git a/make_boot_img b/make_boot_img
deleted file mode 100755
index 9a0b71c8a..000000000
--- a/make_boot_img
+++ /dev/null
@@ -1,512 +0,0 @@
-#!/usr/bin/perl
-
-@ARGV >= 2 or die "usage: $0 <image> all|other|cdrom|hd|network|usb|blank|pcmcia|live|tftp|tftprd\n";
-
-use Config;
-use MDK::Common;
-Config->import;
-my ($arch) = $Config{archname} =~ /(.*)-/;
-
-($img, $type) = @ARGV;
-
-# move stuff to new "kernel" directory
--d 'kernel' or die "directory kernel is missing\n";
-rename 'all.kernels', 'kernel/all.kernels';
-rename 'all.modules', 'kernel/all.modules';
-
-$default_append = "ramdisk_size=32000 root=/dev/ram3";
-$default_vga = "vga=788";
-
-$instdir = "mdk-stage1";
-$mnt = "/tmp/drakx_mnt";
-$mke2fs = "/sbin/mke2fs -q -m 0 -F -s 1";
-
-if ($>) {
-    $sudo = "sudo";
-    $ENV{PATH} = "/sbin:/usr/sbin:$ENV{PATH}";
-}
-
-sub __ { print @_, "\n"; system(@_); }
-sub _ { __ @_; $? and die; }
-
-_ "$sudo mkdir $mnt" unless -e $mnt;
-_ "$sudo mkdir ${mnt}2" unless -e "${mnt}2";
-
-$install = $ {{
-    all => "stage1-full",
-    other => "stage1-full",
-    blank => "stage1-full",
-    live => "stage1-full",
-    tftp => "stage1-full",
-    tftprd => "stage1-full",
-    pcmcia => "stage1-full",
-    network => "stage1-network",
-    usb => "stage1-usb",
-    cdrom => "stage1-cdrom",
-    hd => "stage1-disk",
-    live64 => "stage1-full",
-    tftp64 => "stage1-full",
-    tftprd64 => "stage1-full",
-    pcmcia64 => "stage1-full",
-    network64 => "stage1-network",
-    cdrom64 => "stage1-cdrom",
-    hd64 => "stage1-disk",
-}}{$type} or die;
-
-mkdir "images";
-chomp($main = `cat kernel/all.kernels/.main`);
-
-if ($img =~ /blank|other|pcmcia/) {
-    @kernels = $main;
-} else {
-    @kernels = map { m|kernel/all.kernels/(.*)| } glob('kernel/all.kernels/*');
-    $img =~ /usb/ and @kernels = grep { $_ !~ /2\.2\.14/ } @kernels;  #- 2.2.14 is too old, usb support was not working properly
-}
-
-foreach (@kernels) {
-    if ($img =~ /rdz$/) {
-	initrd($mnt, "$img-$_");
-    } else {
-	$::{"boot_img_$arch"}->($mnt, "$img-$_", glob("kernel/all.kernels/$_/boot/vmlinu*"));
-	rename("$img-$main", "$img");
-    }
-}
-if ($arch =~ /i.86/ && $img =~ /all/) {
-    isolinux($main, @kernels);
-}
-
-if (my ($tftpboot) = grep { -e $_ } qw(/tftpboot /var/lib/tftpboot)) {
-    system("/bin/cp -f kernel/all.kernels/$main/boot/vmlinu* $tftpboot/vmlinuz 2>/dev/null");
-    system("/bin/cp -f images/network.rdz-$main $tftpboot/network.rdz 2>/dev/null");
-}
-
-sub install_stripped { _ "strip $_[0]"; _ "$sudo install $_[0] $_[1]" }
-
-sub initrd {
-    my ($mnt, $img) = @_;
-    my ($ltype, $I) = $type =~ /(.*?)(64)/; $ltype ||= $type;
-    my $tmp = "$ENV{HOME}/tmp/initrd";
-    my $tar = "$instdir/stage1-data/stage1.tar.bz2";
-
-    __ "$sudo umount $tmp $mnt 2>/dev/null";
-    _ "dd if=/dev/zero of=$tmp bs=1k count=" . ($arch =~ /ia64/ ? ($type eq "all" ? 16386 : 16384) : ($type eq "all" ? 4000 : 2000));
-    _ "$mke2fs $tmp";
-    _ "$sudo mount -t ext2 $tmp $mnt -o loop";
-
-    _ "$sudo tar xjC $mnt -f $tar";
-    install_stripped("$instdir/init", "$mnt/sbin");
-    install_stripped("$instdir/$install", "$mnt/sbin/stage1");
-
-    if ($type eq "network" || $type eq "usb" || $type eq "all" || $type eq "other" || $type eq "blank") {
-	install_stripped("$instdir/ppp/pppd-bin", "$mnt/sbin/pppd");
-	install_stripped("$instdir/rp-pppoe/pppoe-bin", "$mnt/sbin/pppoe");
-	_ "$sudo mknod $mnt/dev/ppp c 108 0";
-	_ "$sudo mknod $mnt/dev/ptyp0 c 2 0";
-	_ "$sudo mknod $mnt/dev/ttyp0 c 3 0";
-    }
-
-    if (member($type, qw(pcmcia all network)) && $arch !~ /ppc/ && $arch !~ /ia64/) {
-	 _ "$sudo cp -a /etc/pcmcia $mnt/etc";
-	 _ "cp $mnt/etc/pcmcia/config /tmp/pcmcia_config_tmp";
-	 _ "tools/patch_pcmcia_config.pl /tmp/pcmcia_config_tmp kernel/all.modules/$main/modules.dep";
-	 _ "sudo mv /tmp/pcmcia_config_tmp $mnt/etc/pcmcia/config";
-    }
-    my ($ext) = $img =~ /rdz-(.*)/ or die "bad initrd name ($img)";
-    $modz = "kernel/all.modules$I/$ext";
-    _ "$sudo cp -f $modz/${ltype}_modules.mar $mnt/modules/modules$I.mar" if $type !~ /blank/;
-    _ "$sudo cp -f $modz/modules.dep $mnt/modules/";
-    _ "$sudo umount $mnt";
-
-
-# Workaround for vfat-loop bug (quite touchy)
-    _ "gzip -9f $tmp";
-    _ "cp -f $tmp.gz $img";
-    _ "rm -f $tmp.gz";
-#    _ "gzip -9 -c $tmp > $img";
-#    _ "rm -f $tmp";
-}
-
-sub entries_append {
-    my ($type) = @_;
-
-    my $automatic = "";
-    $automatic = "automatic=method:cdrom" if ($type eq "cdrom");
-    $automatic = "automatic=method:disk" if ($type eq "hd");
-
-    my @simple_entries = (
-	linux => "$default_vga",
-	vgalo => "vga=785",
-	vgahi => "vga=791",
-	vga16 => "vga16",
-	text => "text",
-	patch => "patch $default_vga",
-	expert => "expert $default_vga",
-	rescue => "rescue rw",
-    );
-    my @entries = (
-        (map { $_->[0] => "$automatic $_->[1]" } group_by2(@simple_entries)),
-	if_(member($type, "cdrom", "all"), oem => "automatic=method:cdrom $default_vga rescue oem rw"),
-        if_($type eq "all", all => "pcmcia $default_vga"),
-    );
-
-    map { [ $_->[0], "$default_append $_->[1]" ] }
-      group_by2(@entries);
-}
-
-sub boot_img_i386 {
-    my ($mnt, $img, $kernel) = @_;
-
-    __ "$sudo umount $mnt 2>/dev/null";
-
-    if ($type eq "hd") {
-	_ "bunzip2 -c $instdir/init-data/msgboot.img.bz2 > $img";
-    } elsif ($type eq "all") {
-	_ "bunzip2 -c $instdir/init-data/msgboot-graphicallogo-2880.img.bz2 > $img";
-    } elsif ($type eq "blank") {
-	_ "bunzip2 -c $instdir/init-data/msgboot-blank.img.bz2 > $img";
-    } else {
-	_ "bunzip2 -c $instdir/init-data/msgboot-graphicallogo.img.bz2 > $img";
-    }
-
-
-    _ "$sudo mount -t vfat -o umask=0 $img $mnt -o loop";
-    _ "cat $kernel > $mnt/vmlinuz" if $type !~ /blank/;
-
-    my $rdz = $img; $rdz =~ s/\.img/.rdz/;
-    initrd("${mnt}2", $rdz) if !-e $rdz;
-    eval { _ "cp -f $rdz $mnt/$type.rdz" };
-    if ($@) {
-	unlink "$mnt/$type.rdz";
-	my $avail = (split ' ', `df $mnt`)[-3];
-	my $s = int((-s $rdz) / 1024);
-	die sprintf("not enough room for $rdz: need %dKB (available %dKB < needed %dKB)\n", $s - $avail, $avail, $s);
-    }
-
-    my $timeout = 72;
-    output "$mnt/syslinux.cfg",
-"default linux
-prompt 1
-timeout $timeout
-display boot.msg
-F1 help.msg
-F2 advanced.msg
-F3 boot.msg
-" . join('', map {
-"label $_->[0]
-  kernel vmlinuz
-  append initrd=$type.rdz $_->[1]
-" } entries_append($type));
-
-    _ "sync";
-    _ "df $mnt";
-}
-
-sub boot_img_alpha {
-    my ($mnt, $img) = @_;
-
-    __ "$sudo umount $mnt 2>/dev/null";
-    _ "dd if=/dev/zero of=$img bs=1k count=1440";
-    _ "$mke2fs $img";
-    _ "/sbin/e2writeboot $img /boot/bootlx";
-    _ "$sudo mount -t ext2 $img $mnt -o loop";
-    _ "cp -f vmlinux.gz $mnt" if $type !~ /blank/;
-    -f "$type.rdz" ? _ "cp -f $type.rdz $mnt" : initrd("${mnt}2", "$mnt/$type.rdz");
-
-    mkdir "$mnt/etc", 0777;
-    output("$mnt/etc/aboot.conf", 
-"0:vmlinux.gz initrd=$type.rdz rw $default_append $type
-1:vmlinux.gz initrd=$type.rdz rw $default_append text $type
-");
-    _ "sync";
-    _ "df $mnt";
-}
-
-sub boot_img_ia64 {
-    my ($mnt, $img, $kernel) = @_;
-	my $rdz = $img; $rdz =~ s/\.img/.rdz/;
-
-    __ "$sudo umount $mnt 2>/dev/null";
-    _ "dd if=/dev/zero of=$img bs=1k count=16384";
-    _ "mkdosfs $img";
-    _ "$sudo mount -t vfat $img $mnt -o loop,umask=000";
-    _ "$sudo cp -f $kernel $mnt/vmlinux";
-    _ "cp -f $rdz $mnt/$type.rdz";
-    _ "$sudo cp -f tools/ia64/elilo.efi $mnt";
-	output("$mnt/elilo.conf", "
-prompt
-timeout=50
-
-image=vmlinux
-        label=linux
-        root=/dev/ram3
-        initrd=$type.rdz
-        append=\" ramdisk_size=120000\"
-        read-only
-
-image=vmlinux
-        label=rescue
-        root=/dev/ram3
-        initrd=$type.rdz
-        append=\" rescue ramdisk_size=120000\"
-");
-    _ "sync";
-    _ "df $mnt";
-
-}
-
-sub boot_img_sparc {
-    my ($mnt, $img) = @_;
-    if ($type =~ /^live(.*)/) {
-	#- hack to produce directly into /export the needed file for cdrom boot.
-	my $dir = "/export";
-	my $boot = "boot"; #- non-absolute pathname only!
-
-	_ "mkdir -p $dir/$boot";
-	_ "cp -f /boot/cd.b /boot/second.b $dir/$boot";
-	_ "cp -f vmlinux$1 $dir/$boot/vmlinux$1";
-	-f "live$1.rdz" ? _ "cp -f live$1.rdz $dir/$boot" : initrd("${mnt}2", "$dir/$boot/live$1.rdz");
-
-	output("$dir/$boot/silo.conf", "
-partition=1
-default=linux
-timeout=100
-read-write
-message=/$boot/boot.msg
-image=\"cat /$boot/boot.msg\"
-  label=1
-  single-key
-image=\"cat /$boot/general.msg\"
-  label=2
-  single-key
-image=\"cat /$boot/expert.msg\"
-  label=3
-  single-key
-image=\"cat /$boot/rescue.msg\"
-  label=4
-  single-key
-image=\"cat /$boot/kickit.msg\"
-  label=5
-  single-key
-image=\"cat /$boot/param.msg\"
-  label=6
-  single-key
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
-  label=linux
-  alias=install
-  initrd=/$boot/live.rdz
-  append=\"ramdisk_size=32000 root=/dev/ram3\"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
-  label=text
-  initrd=/$boot/live.rdz
-  append=\"ramdisk_size=32000 text root=/dev/ram3\"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
-  label=expert
-  initrd=/$boot/live.rdz
-  append=\"ramdisk_size=32000 expert root=/dev/ram3\"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
-  label=ks
-  initrd=/$boot/live.rdz
-  append=\"ramdisk_size=32000 ks root=/dev/ram3\"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
-  label=rescue
-  initrd=/$boot/live.rdz
-  append=\"ramdisk_size=32000 rescue rw root=/dev/ram3\"
-image[sun4u]=/$boot/vmlinux64
-  label=linux
-  alias=install
-  initrd=/$boot/live64.rdz
-  append=\"ramdisk_size=32000 root=/dev/ram3\"
-image[sun4u]=/$boot/vmlinux64
-  label=text
-  initrd=/$boot/live64.rdz
-  append=\"ramdisk_size=32000 text root=/dev/ram3\"
-image[sun4u]=/$boot/vmlinux64
-  label=expert
-  initrd=/$boot/live64.rdz
-  append=\"ramdisk_size=32000 expert root=/dev/ram3\"
-image[sun4u]=/$boot/vmlinux64
-  label=ks
-  initrd=/$boot/live64.rdz
-  append=\"ramdisk_size=32000 ks root=/dev/ram3\"
-image[sun4u]=/$boot/vmlinux64
-  label=rescue
-  initrd=/$boot/live64.rdz
-  append=\"ramdisk_size=32000 rescue rw root=/dev/ram3\"
-");
-
-	output("$dir/$boot/README", "
-To Build a Bootable CD-ROM, try:
-  mkisofs -R -o t.iso -s /$boot/silo.conf /export
-");
-    } elsif ($type =~ /^tftprd(.*)/) {
-	my $dir = "/export";
-	my $boot = "images";
-	my $setarch = $1 ? "sparc64" : "sparc32";
-
-	_ "mkdir -p $dir/$boot";
-	-f "$type.rdz" or initrd("${mnt}2", "$type.rdz");
-	_ "cp -f vmlinux$1.aout $dir/$boot/$type.img";
-	_ "$setarch kernel$1/src/arch/sparc$1/boot/piggyback $dir/$boot/$type.img kernel$1/boot/System.map $type.rdz";
-    } elsif ($type =~ /^tftp(.*)/) {
-	my $dir = "/export";
-	my $boot = "images";
-
-	_ "mkdir -p $dir/$boot";
-	_ "cp -f vmlinux$1.aout $dir/$boot/$type.img";
-    } else {
-	my $dir = "floppy";
-	my ($ltype, $I) = $type =~ /(.*?)(64)/; $ltype ||= $type;
-
-	__ "$sudo umount $mnt 2>/dev/null";
-	_ "rm -rf $dir";
-	_ "mkdir -p $dir";
-	_ "cp -f /boot/fd.b /boot/second.b $dir";
-	_ "cp -f vmlinuz$I $dir/vmlinux$I.gz" if $type !~ /blank/;
-	-f "$type.rdz" ? _ "cp -f $type.rdz $dir" : initrd("${mnt}2", "$dir/$type.rdz");
-
-	output("$dir/boot.msg", "
-Welcome to Mandrake Linux 7.1
-
-Press <Enter> to install or upgrade a system 7mMandrake Linux7m
-");
-
-	output("$dir/silo.conf", "
-partition=1
-default=linux
-timeout=100
-read-write
-message=/boot.msg
-image=/vmlinux$I.gz
-  label=linux
-  initrd=/$type.rdz
-  append=\"ramdisk_size=32000 $ltype root=/dev/ram3\"
-");
-	_ "genromfs -d $dir -f /dev/ram -A 2048,/.. -a 512 -V \'DrakX boot disk\'";
-	_ "$sudo mount -t romfs /dev/ram $mnt";
-	_ "silo -r $mnt -F -i /fd.b -b /second.b -C /silo.conf";
-	_ "$sudo umount $mnt";
-	_ "dd if=/dev/ram of=$type.img bs=1440k count=1";
-	_ "sync";
-	_ "$sudo mount -t romfs /dev/ram $mnt";
-	_ "df $mnt";
-    }
-}
-
-sub boot_img_ppc {
-    my ($mnt, $img, $kern, $modz) = @_;
-    my $dir = "/export";
-    my $boot = "boot"; #- non-absolute pathname only!
-    my ($extension) = $modz =~ /.*\/([^\/]+)/;
-    _ "mkdir -p $dir/$boot";
-    _ "cp -f $kern $dir/$boot/vmlinux";
-    _ "cp -f images/all.rdz$extension $dir/boot/all.gz";
-    _ "cp -f tools/ppc/yaboot $dir/boot/yaboot";
-	
-	output("$dir/$boot/yaboot.conf", "
-init-message = \"\\nWelcome to Mandrake Linux PPC!\\nHit <TAB> for boot options.\\n\\n\"
-timeout = 150
-default = install-novideo
-
-image = cd:,\\\\\\\\vmlinux
-    label = install-novideo
-    root = /dev/ram3
-    initrd = cd:,\\\\\\\\all.gz
-    initrd-size = 32000
-    append = \" video=ofonly\"
-    
-image = cd:,\\\\\\\\vmlinux
-    label = install-atyfb
-    root = /dev/ram3
-    initrd = cd:,\\\\\\\\all.gz
-    initrd-size = 32000
-    append = \" video=atyfb:vmode:17\"
-    
-image = cd:,\\\\\\\\vmlinux
-    label = install-aty128fb
-    root = /dev/ram3
-    initrd = cd:,\\\\\\\\all.gz
-    initrd-size = 32000
-    append = \" video=aty128fb:vmode:17\"
-
-image = cd:,\\\\\\\\vmlinux
-    label = install-text
-    root = /dev/ram3
-    initrd = cd:,\\\\\\\\all.gz
-    initrd-size = 32000
-    append = \" text video=ofonly\"
-
-image = enet:0,vmlinux
-    label = install-net
-    root = /dev/ram3
-    initrd = enet:0,all.gz
-    initrd-size = 32000
-    append = \" video=ofonly\"
-
-image = enet:0,vmlinux
-    label = install-net-text
-    root = /dev/ram3
-    initrd = enet:0,all.gz
-    initrd-size = 32000
-    append = \" text video=ofonly\"
-
-image = cd:,\\\\\\\\vmlinux
-    label = rescue
-    root = /dev/ram3
-    initrd = cd:,\\\\\\\\all.gz
-    initrd-size = 32000
-    append = \" rescue video=ofonly\"    
-
-image = enet:0,vmlinux
-    label = rescue-net
-    root = /dev/ram3
-    initrd = enet:0,all.gz
-    initrd-size = 32000
-    append = \" rescue video=ofonly\"    
-");
-	#- seem to need 2 yaboot.conf, one in the root, and one in boot
-	_ "cp -f $dir/boot/yaboot.conf $dir/yaboot.conf";		
-
-	output("$dir/$boot/README", "
-To Build a Bootable CD-ROM, do:
-cd /tools/ppc
-./mkINSTALLCD /export ppc-cd.img
-");
-
-}
-
-sub isolinux {
-    my ($main, @kernels) = @_;
-    @kernels = ($main, grep { $_ ne $main } @kernels);
-    my $debug = 1 ? '-debug' : '';
-    _ "rm -rf isolinux"; mkdir "isolinux", 0777;
-    my $i = 0;
-    foreach (@kernels) {
-	mkdir "isolinux/alt$i", 0777;
-	my ($kernel) = glob("kernel/all.kernels/$_/boot/vmlinu*");
-	_ "cp $kernel isolinux/alt$i/vmlinuz";
-	_ "cp images/all.rdz-$_ isolinux/alt$i/all.rdz";
-	$i++;
-    }
-    _ "cp /usr/lib/syslinux/isolinux$debug.bin isolinux/isolinux.bin";
-    output "isolinux/isolinux.cfg", "
-default linux
-prompt 1
-timeout 150
-display help.msg
-" . join('', map { 
-"label $_->[0]
-  kernel alt0/vmlinuz
-  append changedisk initrd=alt0/all.rdz $_->[1]
-" } entries_append('all'))
-  . join('', map_index { 
-"label alt$::i
-  kernel alt$::i/vmlinuz
-  append changedisk initrd=alt$::i/all.rdz $default_append $default_vga
-" } @kernels);
-
-    output "isolinux/help.msg", 
-"This is a special bootable CDROM giving you a choice between various kernels.
-
-The default is kernel $main.
-" . join('', map_index { $::i ? "\"alt$::i\" is kernel $_\n" : '' } @kernels);
-}
diff --git a/mdk-stage1/.cvsignore b/mdk-stage1/.cvsignore
deleted file mode 100644
index a96a43de4..000000000
--- a/mdk-stage1/.cvsignore
+++ /dev/null
@@ -1,12 +0,0 @@
-init
-stage1-full
-stage1-cdrom
-stage1-disk
-stage1-network
-debug.log
-.depend
-*.rdz*
-mkinitrd_helper.tar.bz2
-hack_*
-stage1-usb
-rescue-gui
diff --git a/mdk-stage1/Makefile b/mdk-stage1/Makefile
deleted file mode 100644
index 98fb79375..000000000
--- a/mdk-stage1/Makefile
+++ /dev/null
@@ -1,260 +0,0 @@
- #******************************************************************************
- #
- #    mdk-stage1 - the program that will load second-stage install
- #
- # $Id$
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- # Portions from Erik Troan (ewt@redhat.com) Copyright 1996 Red Hat Software 
- #
- #*****************************************************************************
- #
- # Currently:
- #
- # 	ix86
- # init with minilibc
- # stage1 with dietlibc
- #
- # 	ppc
- # init with dietlibc
- # stage1 with glibc
- #
- # 	ia64
- # init with glibc
- # stage1 with glibc
- #
- #*****************************************************************************
-
-
-VERSION = 8.2
-
-top_dir = .
-
-include $(top_dir)/Makefile.common
-
-
-DEFS = -DVERSION=\"$(VERSION)\" -DSPAWN_SHELL
-
-COMPILE = $(CC) $(DEFS) $(CFLAGS)
-
-
- #- stage1 "loader"
-ifeq (i386, $(ARCH))
-INITSRC = minilibc.c init.c
-INIT_DEFS = -DINIT_HEADERS=\"minilibc.h\" -fno-builtin
-else
-INITSRC = init.c
-ifeq (ia64, $(ARCH))
-INIT_DEFS = -DINIT_HEADERS=\"init-libc-headers.h\" $(GLIBC_INCLUDES)
-else
-INIT_DEFS = -DINIT_HEADERS=\"init-libc-headers.h\" $(DIETLIBC_INCLUDES)
-endif
-endif
-
-INITOBJS = $(subst .c,.o,$(INITSRC))
-
-
- #- frontends
-NEWT_FRONTEND_SRC = newt-frontend.c
-GLIBC_NEWT_FRONTEND_LIBS = newt/libnewt.a slang/libslang.a
-DIETLIBC_NEWT_FRONTEND_LIBS = $(subst .a,-DIET.a,$(GLIBC_NEWT_FRONTEND_LIBS))
-
-STDIO_FRONTEND_SRC = stdio-frontend.c
-GLIBC_STDIO_FRONTEND_LIBS =
-DIETLIBC_STDIO_FRONTEND_LIBS =
-
-
-FRONTEND_OBJS = $(subst .c,.o,$($(F)_FRONTEND_SRC))
-
-FRONTEND_LINK = $(FRONTEND_OBJS) $($(L)_$(F)_FRONTEND_LIBS)
-
-ifeq (i386, $(ARCH))
-INSMOD = insmod-busybox
-else
-INSMOD = insmod-modutils
-endif
-
-GLIBC_STAGE1_OWN_LIBS = $(INSMOD)/libinsmod.a mar/libmar.a bzlib/libbzlib.a
-DIETLIBC_STAGE1_OWN_LIBS = $(subst .a,-DIET.a,$(GLIBC_STAGE1_OWN_LIBS))
-STAGE1_OWN_LIBS = $($(L)_STAGE1_OWN_LIBS)
-
-
-ifeq (DIETLIBC, $(L))
-STAGE1_NETWORK_LIBS = $(top_dir)/dietlibc/bin-$(ARCH)/librpc.a
-endif
-
-ifeq (GLIBC, $(L))
-STAGE1_NETWORK_LIBS = /usr/lib/libresolv.a
-endif
-
- #- stage1 itself
-STAGE1SRC = stage1.c log.c tools.c modules.c probing.c mount.c automatic.c frontend-common.c
-CDROMSRC = cdrom.c
-DISKSRC = disk.c lomount.c
-NETWORKSRC = network.c nfsmount.c dhcp.c url.c dns.c adsl.c
-
-ALLSRC = $(INITSRC) $(STAGE1SRC) $(CDROMSRC) $(DISKSRC) $(NETWORKSRC)
-
-
-
-STAGE1OBJS-CDROM = $(subst .c,-CDROM.o,$(STAGE1SRC) $(CDROMSRC))
-
-CDROM_DEFS = -DDISABLE_DISK -DDISABLE_NETWORK
-
-
-STAGE1OBJS-DISK = $(subst .c,-DISK.o,$(STAGE1SRC) $(DISKSRC))
-
-DISK_DEFS = -DDISABLE_CDROM -DDISABLE_NETWORK
-
-
-STAGE1OBJS-NETWORK = $(subst .c,-NETWORK.o,$(STAGE1SRC) $(NETWORKSRC))
-
-NETWORK_DEFS = -DDISABLE_CDROM -DDISABLE_DISK
-
-
-STAGE1OBJS-USB = $(subst .c,-USB.o,$(STAGE1SRC) $(CDROMSRC) $(DISKSRC) $(NETWORKSRC))
-
-STAGE1OBJS-FULL = $(subst .c,-FULL.o,$(STAGE1SRC) $(CDROMSRC) $(DISKSRC) $(NETWORKSRC))
-
-
-ifeq (i386, $(ARCH))
-LDFLAGS_INIT = -static -nostdlib /usr/lib/crt1.o
-else
-ifeq (ia64, $(ARCH))
-LDFLAGS_INIT = $(GLIBC_LDFLAGS_STAGE1)
-INIT_LIBC = $(GLIBC_LIBC)
-else
-LDFLAGS_INIT = $(DIETLIBC_LDFLAGS_STAGE1)
-INIT_LIBC = $(DIETLIBC_LIBC)
-endif
-endif
-
-
-BINS = init stage1-full
-
-ifeq (i386, $(ARCH))
-BINS += stage1-cdrom stage1-disk stage1-network stage1-usb
-endif
-
-ifneq (ia64, $(ARCH))
-DIRS = dietlibc
-endif
-DIRS += mar pci-resource usb-resource bzlib $(INSMOD) slang newt ppp/pppd rp-pppoe/src
-ifeq (i386,$(ARCH))
-DIRS += pcmcia_
-endif
-
-
-ifeq (i386,$(ARCH))
-GLIBC_PCMCIA_LIB = pcmcia_/libpcmcia.a
-DIETLIBC_PCMCIA_LIB = $(subst .a,-DIET.a,$(GLIBC_PCMCIA_LIB))
-PCMCIA_LIB = $($(L)_PCMCIA_LIB)
-PCMCIA_DEFS = -DENABLE_PCMCIA
-endif
-
-
-USB_DEFS_GEN = -DENABLE_USB
-USB_DEFS = -DENABLE_USB -DDISABLE_PCIADAPTERS
-
-all: dirs $(BINS)
-
-dirs:
-	@for n in . $(DIRS); do \
-		[ "$$n" = "." ] || make -C $$n || exit 1 ;\
-	done
-
-init: $(INITOBJS) $(INIT_LIBC)
-	$(CC) $(LDFLAGS_INIT) -o $@ $^
-	$(STRIPCMD) $@
-
-stage1-cdrom: $(STAGE1OBJS-CDROM) $(STAGE1_OWN_LIBS) $(FRONTEND_LINK) $(STAGE1_LIBC)
-	$(CC) $(LDFLAGS_STAGE1) -o $@ $^
-	$(STRIPCMD) $@
-
-stage1-disk: $(STAGE1OBJS-DISK) $(STAGE1_OWN_LIBS) $(FRONTEND_LINK) $(STAGE1_LIBC)
-	$(CC) $(LDFLAGS_STAGE1) -o $@ $^
-	$(STRIPCMD) $@
-
-stage1-network: $(STAGE1OBJS-NETWORK) $(STAGE1_OWN_LIBS) $(STAGE1_NETWORK_LIBS) $(FRONTEND_LINK) $(PCMCIA_LIB) $(STAGE1_LIBC)
-	$(CC) $(LDFLAGS_STAGE1) -o $@ $^
-	$(STRIPCMD) $@
-
-stage1-usb: $(STAGE1OBJS-USB) $(STAGE1_OWN_LIBS) $(STAGE1_NETWORK_LIBS) $(FRONTEND_LINK) $(STAGE1_LIBC)
-	$(CC) $(LDFLAGS_STAGE1) -o $@ $^
-	$(STRIPCMD) $@
-
-stage1-full: $(STAGE1OBJS-FULL) $(STAGE1_OWN_LIBS) $(STAGE1_NETWORK_LIBS) $(FRONTEND_LINK) $(PCMCIA_LIB) $(STAGE1_LIBC)
-	$(CC) $(LDFLAGS_STAGE1) -o $@ $^
-	$(STRIPCMD) $@
-
-
-$(INITOBJS): %.o: %.c
-	$(COMPILE) $(INIT_DEFS) -c $<
-
-$(STAGE1OBJS-CDROM): %-CDROM.o: %.c
-	$(COMPILE) $(INCLUDES) $(CDROM_DEFS) -c $< -o $@
-
-$(STAGE1OBJS-DISK): %-DISK.o: %.c
-	$(COMPILE) $(INCLUDES) $(DISK_DEFS) -c $< -o $@
-
-$(STAGE1OBJS-NETWORK): %-NETWORK.o: %.c
-	$(COMPILE) $(INCLUDES) $(NETWORK_DEFS) $(PCMCIA_DEFS) -c $< -o $@
-
-$(STAGE1OBJS-USB): %-USB.o: %.c
-	$(COMPILE) $(INCLUDES) $(USB_DEFS) -c $< -o $@
-
-$(STAGE1OBJS-FULL): %-FULL.o: %.c
-	$(COMPILE) $(INCLUDES) $(USB_DEFS_GEN) $(PCMCIA_DEFS) -c $< -o $@
-
-.c.o:
-	$(COMPILE) $(INCLUDES) -c $<
-
-
-clean: 
-	@for n in $(DIRS); do \
-		(cd $$n; make clean) \
-	done
-	rm -f *.o .depend *.rdz *.img rescue-gui $(BINS)
-
-
-tar-mkinitrd_helper: clean
-	rm -rf mkinitrd_helper-subdir
-	mkdir mkinitrd_helper-subdir
-	cd mkinitrd_helper-subdir ; cp -a ../dietlibc ../insmod-busybox ../Makefile.common ../insmod.h ../log.h . ; \
-	    cp ../Makefile.mkinitrd_helper Makefile
-	tar cfj mkinitrd_helper.tar.bz2 mkinitrd_helper-subdir --exclude CVS
-	rm -rf mkinitrd_helper-subdir
-
-rescue-gui: rescue-gui.o frontend-common.o $(FRONTEND_LINK) $(STAGE1_LIBC)
-	$(CC) $(LDFLAGS_STAGE1) -o $@ $^
-	$(STRIPCMD) $@
-
-
-.depend:
-	$(CPP) $(CFLAGS) -M $(ALLSRC) > .depend
-
-ifeq (.depend,$(wildcard .depend))
-include .depend
-endif
-
-
-*-CDROM.o: %-CDROM.o: %.o
-
-*-DISK.o: %-DISK.o: %.o
-
-*-NETWORK.o: %-NETWORK.o: %.o
-
-*-USB.o: %-USB.o: %.o
-
-*-FULL.o: %-FULL.o: %.o
-
diff --git a/mdk-stage1/Makefile.common b/mdk-stage1/Makefile.common
deleted file mode 100644
index 7506c1381..000000000
--- a/mdk-stage1/Makefile.common
+++ /dev/null
@@ -1,57 +0,0 @@
- # -*- makefile -*-
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-ARCH := $(patsubst i%86,i386,$(shell uname -m))
-ARCH := $(patsubst sparc%,sparc,$(ARCH))
-
- #- default lib is dietlibc (honoured by main Makefile whenever possible)
-L = DIETLIBC
-#L = GLIBC
-
- #- default frontend is newt (honoured by main Makefile whenever possible)
-F = NEWT
-# F = STDIO
-
- #- override in some situations
-ifeq (ia64, $(ARCH))
-L = GLIBC
-endif
-ifeq (ppc, $(ARCH))
-L = GLIBC
-endif
-
-
- #- flags used by all stuff
-ifeq (ppc, $(ARCH))
-CFLAGS = -Os -pipe -Wall -fomit-frame-pointer
-else
-CFLAGS = -Os -pipe -Wall -Werror -W -fomit-frame-pointer
-endif
-
-DIETLIBC_INCLUDES = -I$(top_dir)/dietlibc/include -I. -I$(top_dir)/bzlib
-GLIBC_INCLUDES = -I. -I$(top_dir)/bzlib
-INCLUDES = $($(L)_INCLUDES)
-
-GLIBC_LDFLAGS_STAGE1 = -static
-DIETLIBC_LDFLAGS_STAGE1 = -nostdlib $(top_dir)/dietlibc/bin-$(ARCH)/start.o
-LDFLAGS_STAGE1 = $($(L)_LDFLAGS_STAGE1)
-
-GLIBC_LIBC =
-DIETLIBC_LIBC = $(top_dir)/dietlibc/bin-$(ARCH)/dietlibc.a
-STAGE1_LIBC = $($(L)_LIBC)
-
-STRIPCMD = strip -R .note -R .comment
-
diff --git a/mdk-stage1/Makefile.mkinitrd_helper b/mdk-stage1/Makefile.mkinitrd_helper
deleted file mode 100644
index 72bef595f..000000000
--- a/mdk-stage1/Makefile.mkinitrd_helper
+++ /dev/null
@@ -1,30 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-
-DIRS = dietlibc insmod-busybox
-
-
-all: dirs
-
-dirs:
-	@for n in . $(DIRS); do \
-		[ "$$n" = "." ] || make -C $$n ;\
-	done
-
-clean: 
-	@for n in $(DIRS); do \
-		(cd $$n; make clean) \
-	done
diff --git a/mdk-stage1/adsl.c b/mdk-stage1/adsl.c
deleted file mode 100644
index d542f2f35..000000000
--- a/mdk-stage1/adsl.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <string.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <sys/ioctl.h>
-#include <errno.h>
-#include <stdio.h>
-#include <resolv.h>
-#include <signal.h>
-
-#include "stage1.h"
-#include "log.h"
-#include "network.h"
-#include "modules.h"
-#include "tools.h"
-#include "frontend.h"
-#include "automatic.h"
-
-#include "adsl.h"
-
-
-static enum return_type adsl_connect(char * net_device, char * username, char * password)
-{
-	char pppoe_call[500];
-	char * pppd_launch[] = { "/sbin/pppd", "pty", pppoe_call, "noipdefault", "noauth", "default-asyncmap", "defaultroute",
-				 "hide-password", "nodetach", "usepeerdns", "local", "mtu", "1492", "mru", "1492", "noaccomp",
-				 "noccp", "nobsdcomp", "nodeflate", "nopcomp", "novj", "novjccomp", "user", username,
-				 "password", password, "lcp-echo-interval", "20", "lcp-echo-failure", "3", "lock", "persist", NULL };
-	int fd;
-	int retries = 10;
-	char * tty_adsl = "/dev/tty6";
-	enum return_type status = RETURN_ERROR;
-	pid_t ppp_pid;
-
-	snprintf(pppoe_call, sizeof(pppoe_call), "/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I %s -T 80 -U -m 1412", net_device);
-
-
-	fd = open(tty_adsl, O_RDWR);
-	if (fd == -1) {
-		log_message("cannot open tty -- no pppd");
-		return RETURN_ERROR;
-	}
-	else if (access(pppd_launch[0], X_OK)) {
-		log_message("cannot open pppd - %s doesn't exist", pppd_launch[0]);
-		return RETURN_ERROR;
-	}
-
-	if (!(ppp_pid = fork())) {
-		dup2(fd, 0);
-		dup2(fd, 1);
-		dup2(fd, 2);
-		
-		close(fd);
-		setsid();
-		if (ioctl(0, TIOCSCTTY, NULL))
-			log_perror("could not set new controlling tty");
-		
-		printf("\t(exec of pppd)\n");
-		execve(pppd_launch[0], pppd_launch, grab_env());
-		log_message("execve of %s failed: %s", pppd_launch[0], strerror(errno));
-		exit(-1);
-	}
-	close(fd);
-	while (retries > 0 && kill(ppp_pid, 0) == 0) {
-		FILE * f;
-		if ((f = fopen("/var/run/pppd.tdb", "rb"))) {
-			while (1) {
-				char buf[500];
-				if (!fgets(buf, sizeof(buf), f))
-					break;
-				if (strstr(buf, "IPLOCAL="))
-					status = RETURN_OK;
-			}
-			fclose(f);
-			if (status == RETURN_OK) {
-				log_message("PPP: connected!");
-				break;
-			}
-		}
-		retries--;
-		log_message("PPP: <sleep>");
-		sleep(2);
-	}
-
-	if (status != RETURN_OK) {
-		log_message("PPP: could not connect");
-		kill(ppp_pid, SIGTERM);
-		sleep(1);
-		kill(ppp_pid, SIGKILL);
-		sleep(1);
-	}
-	return status;
-}
-
-
-enum return_type perform_adsl(struct interface_info * intf)
-{
-	struct in_addr addr;
-	char * questions[] = { "Username", "Password", NULL };
-	char * questions_auto[] = { "adsluser", "adslpass", NULL };
-	static char ** answers = NULL;
-	enum return_type results;
-
-	inet_aton("10.0.0.10", &addr);
-	memcpy(&intf->ip, &addr, sizeof(addr));
-
-	inet_aton("255.255.255.0", &addr);
-	memcpy(&intf->netmask, &addr, sizeof(addr));
-
-	*((uint32_t *) &intf->broadcast) = (*((uint32_t *) &intf->ip) &
-					    *((uint32_t *) &intf->netmask)) | ~(*((uint32_t *) &intf->netmask));
-
-	intf->is_ptp = 0;
-
-	if (configure_net_device(intf)) {
-		stg1_error_message("Could not configure..");
-		return RETURN_ERROR;
-	}
-
-	results = ask_from_entries_auto("Please enter the username and password for your ADSL account.\n"
-					"(Warning! only PPPoE protocol is supported)",
-					questions, &answers, 40, questions_auto, NULL);
-	if (results != RETURN_OK)
-		return results;
-
-	intf->boot_proto = BOOTPROTO_ADSL_PPPOE;
-
-	wait_message("Waiting for ADSL connection to show up...");
-	my_insmod("ppp_generic", ANY_DRIVER_TYPE, NULL);
-	my_insmod("ppp_async", ANY_DRIVER_TYPE, NULL);
-	my_insmod("ppp", ANY_DRIVER_TYPE, NULL);
-	results = adsl_connect(intf->device, answers[0], answers[1]);
-	remove_wait_message();
-
-	if (results != RETURN_OK) {
-		wait_message("Retrying the ADSL connection...");
-		results = adsl_connect(intf->device, answers[0], answers[1]);
-		remove_wait_message();
-	} else {
-		intf->user = strdup(answers[0]);
-		intf->pass = strdup(answers[1]);
-	}
-
-	if (results != RETURN_OK) {
-		stg1_error_message("I could not connect to the ADSL network.");
-		return perform_adsl(intf);
-	}
-
-	sleep(1);
-	res_init();		/* reinit the resolver, pppd modified /etc/resolv.conf */
-
-	return RETURN_OK;
-}
diff --git a/mdk-stage1/adsl.h b/mdk-stage1/adsl.h
deleted file mode 100644
index 9d32cc631..000000000
--- a/mdk-stage1/adsl.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * View the homepage: http://us.mandrakesoft.com/~gc/html/stage1.html
- *
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- *  Portions from GRUB  --  GRand Unified Bootloader
- *  Copyright (C) 2000  Free Software Foundation, Inc.
- *
- *  Itself based on etherboot-4.6.4 by Martin Renters.
- *
- */
-
-#ifndef _ADSL_H_
-#define _ADSL_H_
-
-#include "stage1.h"
-#include "network.h"
-
-enum return_type perform_adsl(struct interface_info * intf);
-
-#endif
diff --git a/mdk-stage1/automatic.c b/mdk-stage1/automatic.c
deleted file mode 100644
index 1c6e021a0..000000000
--- a/mdk-stage1/automatic.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * This is supposed to replace the redhat "kickstart", by name but
- * also by design (less code pollution).
- *
- */
-
-
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include "tools.h"
-#include "stage1.h"
-#include "frontend.h"
-#include "log.h"
-
-#include "automatic.h"
-
-
-static struct param_elem * automatic_params;
-static char * value_not_bound = "";
-
-void grab_automatic_params(char * line)
-{
-	int i, p;
-	struct param_elem tmp_params[50];
-
-	i = 0; p = 0;
-	while (line[i] != '\0') {
-		char *name, *value;
-		int k;
-		int j = i;
-		while (line[i] != ':' && line[i] != '\0')
-			i++;
-		name = memdup(&line[j], i-j + 1);
-		name[i-j] = 0;
-
-		k = i+1;
-		i++;
-		while (line[i] != ',' && line[i] != '\0')
-			i++;
-		value = memdup(&line[k], i-k + 1);
-		value[i-k] = 0;
-
-		tmp_params[p].name = name;
-		tmp_params[p].value = value;
-		p++;
-		if (line[i] == '\0')
-			break;
-		i++;
-	}
-
-	tmp_params[p++].name = NULL;
-	automatic_params = memdup(tmp_params, sizeof(struct param_elem) * p);
-
-	log_message("AUTOMATIC MODE: got %d params", p-1);
-}
-
-
-char * get_auto_value(char * auto_param)
-{
-	struct param_elem * ptr = automatic_params;
-
-	struct param_elem short_aliases[] =
-		{ { "method", "met" }, { "network", "netw" }, { "interface", "int" }, { "gateway", "gat" },
-		  { "netmask", "netm" }, { "adsluser", "adslu" }, { "adslpass", "adslp" }, { "hostname", "hos" },
-		  { "domain", "dom" }, { "server", "ser" }, { "directory", "dir" }, { "user", "use" },
-		  { "pass", "pas" }, { "disk", "dis" }, { "partition", "par" }, { NULL, NULL } };
-	struct param_elem * ptr_alias = short_aliases;
-	while (ptr_alias->name) {
-		if (streq(auto_param, ptr_alias->name))
-			break;
-		ptr_alias++;
-	}
-
-	while (ptr->name) {
-		if (streq(ptr->name, auto_param)
-		    || (ptr_alias->name && streq(ptr_alias->value, ptr->name)))
-			return ptr->value;
-		ptr++;
-	}
-
-	return value_not_bound;
-}
-
-
-enum return_type ask_from_list_auto(char *msg, char ** elems, char ** choice, char * auto_param, char ** elems_auto)
-{
-	if (!IS_AUTOMATIC)
-		return ask_from_list(msg, elems, choice);
-	else {
-		char ** sav_elems = elems;
-		char * tmp = get_auto_value(auto_param);
-		while (elems && *elems) {
-			if (!strcmp(tmp, *elems_auto)) {
-				*choice = *elems;
-				log_message("AUTOMATIC: parameter %s for %s means returning %s", tmp, auto_param, *elems);
-				return RETURN_OK;
-			}
-			elems++;
-			elems_auto++;
-		}
-		unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
-		return ask_from_list(msg, sav_elems, choice);
-	}
-}
-
-enum return_type ask_from_list_comments_auto(char *msg, char ** elems, char ** elems_comments, char ** choice, char * auto_param, char ** elems_auto)
-{
-	if (!IS_AUTOMATIC)
-		return ask_from_list_comments(msg, elems, elems_comments, choice);
-	else {
-		char ** sav_elems = elems;
-		char * tmp = get_auto_value(auto_param);
-		while (elems && *elems) {
-			if (!strcmp(tmp, *elems_auto)) {
-				*choice = *elems;
-				log_message("AUTOMATIC: parameter %s for %s means returning %s", tmp, auto_param, *elems);
-				return RETURN_OK;
-			}
-			elems++;
-			elems_auto++;
-		}
-		unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
-		return ask_from_list_comments(msg, sav_elems, elems_comments, choice);
-	}
-}
-
-
-enum return_type ask_from_entries_auto(char *msg, char ** questions, char *** answers, int entry_size, char ** questions_auto, void (*callback_func)(char ** strings))
-{
-	if (!IS_AUTOMATIC)
-		return ask_from_entries(msg, questions, answers, entry_size, callback_func);
-	else {
-		char * tmp_answers[50];
-		int i = 0;
-		while (questions && *questions) {
-			tmp_answers[i] = get_auto_value(*questions_auto);
-			log_message("AUTOMATIC: question %s answers %s because of param %s", *questions, tmp_answers[i], *questions_auto);
-			i++;
-			questions++;
-			questions_auto++;
-			
-		}
-		*answers = memdup(tmp_answers, sizeof(char *) * i);
-		return RETURN_OK;
-	}
-}
diff --git a/mdk-stage1/automatic.h b/mdk-stage1/automatic.h
deleted file mode 100644
index c2ac0a73d..000000000
--- a/mdk-stage1/automatic.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * This is supposed to replace the redhat "kickstart", by name but
- * also by design (no code pollution).
- *
- */
-
-#ifndef _AUTOMATIC_H_
-#define _AUTOMATIC_H_
-
-#include "stage1.h"
-
-void grab_automatic_params(char * line);
-
-enum return_type ask_from_list_auto(char *msg, char ** elems, char ** choice, char * auto_param, char ** elems_auto);
-enum return_type ask_from_list_comments_auto(char *msg, char ** elems, char ** elems_comments, char ** choice, char * auto_param, char ** elems_auto);
-enum return_type ask_from_entries_auto(char *msg, char ** questions, char *** answers, int entry_size, char ** questions_auto, void (*callback_func)(char ** strings));
-
-#endif
diff --git a/mdk-stage1/bzlib/Makefile b/mdk-stage1/bzlib/Makefile
deleted file mode 100644
index 03a2c254b..000000000
--- a/mdk-stage1/bzlib/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-LIBNAME = libbzlib
-
-OBJS = blocksort.o bzlib.o compress.o crctable.o decompress.o huffman.o randtable.o
-
-DEFS =
-
-INCS =
-
-
-TARGETS = $(LIBNAME).a
-
-ifeq (DIETLIBC, $(L))
-TARGETS += $(LIBNAME)-DIET.a
-endif
-
-all: $(TARGETS)
-
-clean:
-	rm -f *.o *.a
-
-OBJS-DIET = $(subst .o,-DIET.o,$(OBJS))
-
-$(LIBNAME).a: $(OBJS)
-	ar -cru $@ $^
-	ranlib $@
-
-$(LIBNAME)-DIET.a: $(OBJS-DIET)
-	ar -cru $@ $^
-	ranlib $@
-
-$(OBJS): %.o: %.c
-	$(CC) $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -c $< -o $@
-
-$(OBJS-DIET): %-DIET.o: %.c
-	$(CC) $(CFLAGS) $(DEFS) $(INCS) $(DIETLIBC_INCLUDES) -c $< -o $@
diff --git a/mdk-stage1/bzlib/blocksort.c b/mdk-stage1/bzlib/blocksort.c
deleted file mode 100644
index c1b78c483..000000000
--- a/mdk-stage1/bzlib/blocksort.c
+++ /dev/null
@@ -1,1138 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Block sorting machinery                               ---*/
-/*---                                           blocksort.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
-
-  To get some idea how the block sorting algorithms in this file 
-  work, read my paper 
-     On the Performance of BWT Sorting Algorithms
-  in Proceedings of the IEEE Data Compression Conference 2000,
-  Snowbird, Utah, USA, 27-30 March 2000.  The main sort in this
-  file implements the algorithm called  cache  in the paper.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-/*---------------------------------------------*/
-/*--- Fallback O(N log(N)^2) sorting        ---*/
-/*--- algorithm, for repetitive blocks      ---*/
-/*---------------------------------------------*/
-
-/*---------------------------------------------*/
-static 
-__inline__
-void fallbackSimpleSort ( UInt32* fmap, 
-                          UInt32* eclass, 
-                          Int32   lo, 
-                          Int32   hi )
-{
-   Int32 i, j, tmp;
-   UInt32 ec_tmp;
-
-   if (lo == hi) return;
-
-   if (hi - lo > 3) {
-      for ( i = hi-4; i >= lo; i-- ) {
-         tmp = fmap[i];
-         ec_tmp = eclass[tmp];
-         for ( j = i+4; j <= hi && ec_tmp > eclass[fmap[j]]; j += 4 )
-            fmap[j-4] = fmap[j];
-         fmap[j-4] = tmp;
-      }
-   }
-
-   for ( i = hi-1; i >= lo; i-- ) {
-      tmp = fmap[i];
-      ec_tmp = eclass[tmp];
-      for ( j = i+1; j <= hi && ec_tmp > eclass[fmap[j]]; j++ )
-         fmap[j-1] = fmap[j];
-      fmap[j-1] = tmp;
-   }
-}
-
-
-/*---------------------------------------------*/
-#define fswap(zz1, zz2) \
-   { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; }
-
-#define fvswap(zzp1, zzp2, zzn)       \
-{                                     \
-   Int32 yyp1 = (zzp1);               \
-   Int32 yyp2 = (zzp2);               \
-   Int32 yyn  = (zzn);                \
-   while (yyn > 0) {                  \
-      fswap(fmap[yyp1], fmap[yyp2]);  \
-      yyp1++; yyp2++; yyn--;          \
-   }                                  \
-}
-
-
-#define fmin(a,b) ((a) < (b)) ? (a) : (b)
-
-#define fpush(lz,hz) { stackLo[sp] = lz; \
-                       stackHi[sp] = hz; \
-                       sp++; }
-
-#define fpop(lz,hz) { sp--;              \
-                      lz = stackLo[sp];  \
-                      hz = stackHi[sp]; }
-
-#define FALLBACK_QSORT_SMALL_THRESH 10
-#define FALLBACK_QSORT_STACK_SIZE   100
-
-
-static
-void fallbackQSort3 ( UInt32* fmap, 
-                      UInt32* eclass,
-                      Int32   loSt, 
-                      Int32   hiSt )
-{
-   Int32 unLo, unHi, ltLo, gtHi, n, m;
-   Int32 sp, lo, hi;
-   UInt32 med, r, r3;
-   Int32 stackLo[FALLBACK_QSORT_STACK_SIZE];
-   Int32 stackHi[FALLBACK_QSORT_STACK_SIZE];
-
-   r = 0;
-
-   sp = 0;
-   fpush ( loSt, hiSt );
-
-   while (sp > 0) {
-
-      AssertH ( sp < FALLBACK_QSORT_STACK_SIZE, 1004 );
-
-      fpop ( lo, hi );
-      if (hi - lo < FALLBACK_QSORT_SMALL_THRESH) {
-         fallbackSimpleSort ( fmap, eclass, lo, hi );
-         continue;
-      }
-
-      /* Random partitioning.  Median of 3 sometimes fails to
-         avoid bad cases.  Median of 9 seems to help but 
-         looks rather expensive.  This too seems to work but
-         is cheaper.  Guidance for the magic constants 
-         7621 and 32768 is taken from Sedgewick's algorithms
-         book, chapter 35.
-      */
-      r = ((r * 7621) + 1) % 32768;
-      r3 = r % 3;
-      if (r3 == 0) med = eclass[fmap[lo]]; else
-      if (r3 == 1) med = eclass[fmap[(lo+hi)>>1]]; else
-                   med = eclass[fmap[hi]];
-
-      unLo = ltLo = lo;
-      unHi = gtHi = hi;
-
-      while (1) {
-         while (1) {
-            if (unLo > unHi) break;
-            n = (Int32)eclass[fmap[unLo]] - (Int32)med;
-            if (n == 0) { 
-               fswap(fmap[unLo], fmap[ltLo]); 
-               ltLo++; unLo++; 
-               continue; 
-            };
-            if (n > 0) break;
-            unLo++;
-         }
-         while (1) {
-            if (unLo > unHi) break;
-            n = (Int32)eclass[fmap[unHi]] - (Int32)med;
-            if (n == 0) { 
-               fswap(fmap[unHi], fmap[gtHi]); 
-               gtHi--; unHi--; 
-               continue; 
-            };
-            if (n < 0) break;
-            unHi--;
-         }
-         if (unLo > unHi) break;
-         fswap(fmap[unLo], fmap[unHi]); unLo++; unHi--;
-      }
-
-      AssertD ( unHi == unLo-1, "fallbackQSort3(2)" );
-
-      if (gtHi < ltLo) continue;
-
-      n = fmin(ltLo-lo, unLo-ltLo); fvswap(lo, unLo-n, n);
-      m = fmin(hi-gtHi, gtHi-unHi); fvswap(unLo, hi-m+1, m);
-
-      n = lo + unLo - ltLo - 1;
-      m = hi - (gtHi - unHi) + 1;
-
-      if (n - lo > hi - m) {
-         fpush ( lo, n );
-         fpush ( m, hi );
-      } else {
-         fpush ( m, hi );
-         fpush ( lo, n );
-      }
-   }
-}
-
-#undef fmin
-#undef fpush
-#undef fpop
-#undef fswap
-#undef fvswap
-#undef FALLBACK_QSORT_SMALL_THRESH
-#undef FALLBACK_QSORT_STACK_SIZE
-
-
-/*---------------------------------------------*/
-/* Pre:
-      nblock > 0
-      eclass exists for [0 .. nblock-1]
-      ((UChar*)eclass) [0 .. nblock-1] holds block
-      ptr exists for [0 .. nblock-1]
-
-   Post:
-      ((UChar*)eclass) [0 .. nblock-1] holds block
-      All other areas of eclass destroyed
-      fmap [0 .. nblock-1] holds sorted order
-      bhtab [ 0 .. 2+(nblock/32) ] destroyed
-*/
-
-#define       SET_BH(zz)  bhtab[(zz) >> 5] |= (1 << ((zz) & 31))
-#define     CLEAR_BH(zz)  bhtab[(zz) >> 5] &= ~(1 << ((zz) & 31))
-#define     ISSET_BH(zz)  (bhtab[(zz) >> 5] & (1 << ((zz) & 31)))
-#define      WORD_BH(zz)  bhtab[(zz) >> 5]
-#define UNALIGNED_BH(zz)  ((zz) & 0x01f)
-
-static
-void fallbackSort ( UInt32* fmap, 
-                    UInt32* eclass, 
-                    UInt32* bhtab,
-                    Int32   nblock,
-                    Int32   verb )
-{
-   Int32 ftab[257];
-   Int32 ftabCopy[256];
-   Int32 H, i, j, k, l, r, cc, cc1;
-   Int32 nNotDone;
-   Int32 nBhtab;
-   UChar* eclass8 = (UChar*)eclass;
-
-   /*--
-      Initial 1-char radix sort to generate
-      initial fmap and initial BH bits.
-   --*/
-   if (verb >= 4)
-      VPrintf0 ( "        bucket sorting ...\n" );
-   for (i = 0; i < 257;    i++) ftab[i] = 0;
-   for (i = 0; i < nblock; i++) ftab[eclass8[i]]++;
-   for (i = 0; i < 256;    i++) ftabCopy[i] = ftab[i];
-   for (i = 1; i < 257;    i++) ftab[i] += ftab[i-1];
-
-   for (i = 0; i < nblock; i++) {
-      j = eclass8[i];
-      k = ftab[j] - 1;
-      ftab[j] = k;
-      fmap[k] = i;
-   }
-
-   nBhtab = 2 + (nblock / 32);
-   for (i = 0; i < nBhtab; i++) bhtab[i] = 0;
-   for (i = 0; i < 256; i++) SET_BH(ftab[i]);
-
-   /*--
-      Inductively refine the buckets.  Kind-of an
-      "exponential radix sort" (!), inspired by the
-      Manber-Myers suffix array construction algorithm.
-   --*/
-
-   /*-- set sentinel bits for block-end detection --*/
-   for (i = 0; i < 32; i++) { 
-      SET_BH(nblock + 2*i);
-      CLEAR_BH(nblock + 2*i + 1);
-   }
-
-   /*-- the log(N) loop --*/
-   H = 1;
-   while (1) {
-
-      if (verb >= 4) 
-         VPrintf1 ( "        depth %6d has ", H );
-
-      j = 0;
-      for (i = 0; i < nblock; i++) {
-         if (ISSET_BH(i)) j = i;
-         k = fmap[i] - H; if (k < 0) k += nblock;
-         eclass[k] = j;
-      }
-
-      nNotDone = 0;
-      r = -1;
-      while (1) {
-
-	 /*-- find the next non-singleton bucket --*/
-         k = r + 1;
-         while (ISSET_BH(k) && UNALIGNED_BH(k)) k++;
-         if (ISSET_BH(k)) {
-            while (WORD_BH(k) == 0xffffffff) k += 32;
-            while (ISSET_BH(k)) k++;
-         }
-         l = k - 1;
-         if (l >= nblock) break;
-         while (!ISSET_BH(k) && UNALIGNED_BH(k)) k++;
-         if (!ISSET_BH(k)) {
-            while (WORD_BH(k) == 0x00000000) k += 32;
-            while (!ISSET_BH(k)) k++;
-         }
-         r = k - 1;
-         if (r >= nblock) break;
-
-         /*-- now [l, r] bracket current bucket --*/
-         if (r > l) {
-            nNotDone += (r - l + 1);
-            fallbackQSort3 ( fmap, eclass, l, r );
-
-            /*-- scan bucket and generate header bits-- */
-            cc = -1;
-            for (i = l; i <= r; i++) {
-               cc1 = eclass[fmap[i]];
-               if (cc != cc1) { SET_BH(i); cc = cc1; };
-            }
-         }
-      }
-
-      if (verb >= 4) 
-         VPrintf1 ( "%6d unresolved strings\n", nNotDone );
-
-      H *= 2;
-      if (H > nblock || nNotDone == 0) break;
-   }
-
-   /*-- 
-      Reconstruct the original block in
-      eclass8 [0 .. nblock-1], since the
-      previous phase destroyed it.
-   --*/
-   if (verb >= 4)
-      VPrintf0 ( "        reconstructing block ...\n" );
-   j = 0;
-   for (i = 0; i < nblock; i++) {
-      while (ftabCopy[j] == 0) j++;
-      ftabCopy[j]--;
-      eclass8[fmap[i]] = (UChar)j;
-   }
-   AssertH ( j < 256, 1005 );
-}
-
-#undef       SET_BH
-#undef     CLEAR_BH
-#undef     ISSET_BH
-#undef      WORD_BH
-#undef UNALIGNED_BH
-
-
-/*---------------------------------------------*/
-/*--- The main, O(N^2 log(N)) sorting       ---*/
-/*--- algorithm.  Faster for "normal"       ---*/
-/*--- non-repetitive blocks.                ---*/
-/*---------------------------------------------*/
-
-/*---------------------------------------------*/
-static
-__inline__
-Bool mainGtU ( UInt32  i1, 
-               UInt32  i2,
-               UChar*  block, 
-               UInt16* quadrant,
-               UInt32  nblock,
-               Int32*  budget )
-{
-   Int32  k;
-   UChar  c1, c2;
-   UInt16 s1, s2;
-
-   AssertD ( i1 != i2, "mainGtU" );
-   /* 1 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 2 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 3 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 4 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 5 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 6 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 7 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 8 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 9 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 10 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 11 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 12 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-
-   k = nblock + 8;
-
-   do {
-      /* 1 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 2 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 3 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 4 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 5 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 6 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 7 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 8 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-
-      if (i1 >= nblock) i1 -= nblock;
-      if (i2 >= nblock) i2 -= nblock;
-
-      k -= 8;
-      (*budget)--;
-   }
-      while (k >= 0);
-
-   return False;
-}
-
-
-/*---------------------------------------------*/
-/*--
-   Knuth's increments seem to work better
-   than Incerpi-Sedgewick here.  Possibly
-   because the number of elems to sort is
-   usually small, typically <= 20.
---*/
-static
-Int32 incs[14] = { 1, 4, 13, 40, 121, 364, 1093, 3280,
-                   9841, 29524, 88573, 265720,
-                   797161, 2391484 };
-
-static
-void mainSimpleSort ( UInt32* ptr,
-                      UChar*  block,
-                      UInt16* quadrant,
-                      Int32   nblock,
-                      Int32   lo, 
-                      Int32   hi, 
-                      Int32   d,
-                      Int32*  budget )
-{
-   Int32 i, j, h, bigN, hp;
-   UInt32 v;
-
-   bigN = hi - lo + 1;
-   if (bigN < 2) return;
-
-   hp = 0;
-   while (incs[hp] < bigN) hp++;
-   hp--;
-
-   for (; hp >= 0; hp--) {
-      h = incs[hp];
-
-      i = lo + h;
-      while (True) {
-
-         /*-- copy 1 --*/
-         if (i > hi) break;
-         v = ptr[i];
-         j = i;
-         while ( mainGtU ( 
-                    ptr[j-h]+d, v+d, block, quadrant, nblock, budget 
-                 ) ) {
-            ptr[j] = ptr[j-h];
-            j = j - h;
-            if (j <= (lo + h - 1)) break;
-         }
-         ptr[j] = v;
-         i++;
-
-         /*-- copy 2 --*/
-         if (i > hi) break;
-         v = ptr[i];
-         j = i;
-         while ( mainGtU ( 
-                    ptr[j-h]+d, v+d, block, quadrant, nblock, budget 
-                 ) ) {
-            ptr[j] = ptr[j-h];
-            j = j - h;
-            if (j <= (lo + h - 1)) break;
-         }
-         ptr[j] = v;
-         i++;
-
-         /*-- copy 3 --*/
-         if (i > hi) break;
-         v = ptr[i];
-         j = i;
-         while ( mainGtU ( 
-                    ptr[j-h]+d, v+d, block, quadrant, nblock, budget 
-                 ) ) {
-            ptr[j] = ptr[j-h];
-            j = j - h;
-            if (j <= (lo + h - 1)) break;
-         }
-         ptr[j] = v;
-         i++;
-
-         if (*budget < 0) return;
-      }
-   }
-}
-
-
-/*---------------------------------------------*/
-/*--
-   The following is an implementation of
-   an elegant 3-way quicksort for strings,
-   described in a paper "Fast Algorithms for
-   Sorting and Searching Strings", by Robert
-   Sedgewick and Jon L. Bentley.
---*/
-
-#define mswap(zz1, zz2) \
-   { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; }
-
-#define mvswap(zzp1, zzp2, zzn)       \
-{                                     \
-   Int32 yyp1 = (zzp1);               \
-   Int32 yyp2 = (zzp2);               \
-   Int32 yyn  = (zzn);                \
-   while (yyn > 0) {                  \
-      mswap(ptr[yyp1], ptr[yyp2]);    \
-      yyp1++; yyp2++; yyn--;          \
-   }                                  \
-}
-
-static 
-__inline__
-UChar mmed3 ( UChar a, UChar b, UChar c )
-{
-   UChar t;
-   if (a > b) { t = a; a = b; b = t; };
-   if (b > c) { 
-      b = c;
-      if (a > b) b = a;
-   }
-   return b;
-}
-
-#define mmin(a,b) ((a) < (b)) ? (a) : (b)
-
-#define mpush(lz,hz,dz) { stackLo[sp] = lz; \
-                          stackHi[sp] = hz; \
-                          stackD [sp] = dz; \
-                          sp++; }
-
-#define mpop(lz,hz,dz) { sp--;             \
-                         lz = stackLo[sp]; \
-                         hz = stackHi[sp]; \
-                         dz = stackD [sp]; }
-
-
-#define mnextsize(az) (nextHi[az]-nextLo[az])
-
-#define mnextswap(az,bz)                                        \
-   { Int32 tz;                                                  \
-     tz = nextLo[az]; nextLo[az] = nextLo[bz]; nextLo[bz] = tz; \
-     tz = nextHi[az]; nextHi[az] = nextHi[bz]; nextHi[bz] = tz; \
-     tz = nextD [az]; nextD [az] = nextD [bz]; nextD [bz] = tz; }
-
-
-#define MAIN_QSORT_SMALL_THRESH 20
-#define MAIN_QSORT_DEPTH_THRESH (BZ_N_RADIX + BZ_N_QSORT)
-#define MAIN_QSORT_STACK_SIZE 100
-
-static
-void mainQSort3 ( UInt32* ptr,
-                  UChar*  block,
-                  UInt16* quadrant,
-                  Int32   nblock,
-                  Int32   loSt, 
-                  Int32   hiSt, 
-                  Int32   dSt,
-                  Int32*  budget )
-{
-   Int32 unLo, unHi, ltLo, gtHi, n, m, med;
-   Int32 sp, lo, hi, d;
-
-   Int32 stackLo[MAIN_QSORT_STACK_SIZE];
-   Int32 stackHi[MAIN_QSORT_STACK_SIZE];
-   Int32 stackD [MAIN_QSORT_STACK_SIZE];
-
-   Int32 nextLo[3];
-   Int32 nextHi[3];
-   Int32 nextD [3];
-
-   sp = 0;
-   mpush ( loSt, hiSt, dSt );
-
-   while (sp > 0) {
-
-      AssertH ( sp < MAIN_QSORT_STACK_SIZE, 1001 );
-
-      mpop ( lo, hi, d );
-      if (hi - lo < MAIN_QSORT_SMALL_THRESH || 
-          d > MAIN_QSORT_DEPTH_THRESH) {
-         mainSimpleSort ( ptr, block, quadrant, nblock, lo, hi, d, budget );
-         if (*budget < 0) return;
-         continue;
-      }
-
-      med = (Int32) 
-            mmed3 ( block[ptr[ lo         ]+d],
-                    block[ptr[ hi         ]+d],
-                    block[ptr[ (lo+hi)>>1 ]+d] );
-
-      unLo = ltLo = lo;
-      unHi = gtHi = hi;
-
-      while (True) {
-         while (True) {
-            if (unLo > unHi) break;
-            n = ((Int32)block[ptr[unLo]+d]) - med;
-            if (n == 0) { 
-               mswap(ptr[unLo], ptr[ltLo]); 
-               ltLo++; unLo++; continue; 
-            };
-            if (n >  0) break;
-            unLo++;
-         }
-         while (True) {
-            if (unLo > unHi) break;
-            n = ((Int32)block[ptr[unHi]+d]) - med;
-            if (n == 0) { 
-               mswap(ptr[unHi], ptr[gtHi]); 
-               gtHi--; unHi--; continue; 
-            };
-            if (n <  0) break;
-            unHi--;
-         }
-         if (unLo > unHi) break;
-         mswap(ptr[unLo], ptr[unHi]); unLo++; unHi--;
-      }
-
-      AssertD ( unHi == unLo-1, "mainQSort3(2)" );
-
-      if (gtHi < ltLo) {
-         mpush(lo, hi, d+1 );
-         continue;
-      }
-
-      n = mmin(ltLo-lo, unLo-ltLo); mvswap(lo, unLo-n, n);
-      m = mmin(hi-gtHi, gtHi-unHi); mvswap(unLo, hi-m+1, m);
-
-      n = lo + unLo - ltLo - 1;
-      m = hi - (gtHi - unHi) + 1;
-
-      nextLo[0] = lo;  nextHi[0] = n;   nextD[0] = d;
-      nextLo[1] = m;   nextHi[1] = hi;  nextD[1] = d;
-      nextLo[2] = n+1; nextHi[2] = m-1; nextD[2] = d+1;
-
-      if (mnextsize(0) < mnextsize(1)) mnextswap(0,1);
-      if (mnextsize(1) < mnextsize(2)) mnextswap(1,2);
-      if (mnextsize(0) < mnextsize(1)) mnextswap(0,1);
-
-      AssertD (mnextsize(0) >= mnextsize(1), "mainQSort3(8)" );
-      AssertD (mnextsize(1) >= mnextsize(2), "mainQSort3(9)" );
-
-      mpush (nextLo[0], nextHi[0], nextD[0]);
-      mpush (nextLo[1], nextHi[1], nextD[1]);
-      mpush (nextLo[2], nextHi[2], nextD[2]);
-   }
-}
-
-#undef mswap
-#undef mvswap
-#undef mpush
-#undef mpop
-#undef mmin
-#undef mnextsize
-#undef mnextswap
-#undef MAIN_QSORT_SMALL_THRESH
-#undef MAIN_QSORT_DEPTH_THRESH
-#undef MAIN_QSORT_STACK_SIZE
-
-
-/*---------------------------------------------*/
-/* Pre:
-      nblock > N_OVERSHOOT
-      block32 exists for [0 .. nblock-1 +N_OVERSHOOT]
-      ((UChar*)block32) [0 .. nblock-1] holds block
-      ptr exists for [0 .. nblock-1]
-
-   Post:
-      ((UChar*)block32) [0 .. nblock-1] holds block
-      All other areas of block32 destroyed
-      ftab [0 .. 65536 ] destroyed
-      ptr [0 .. nblock-1] holds sorted order
-      if (*budget < 0), sorting was abandoned
-*/
-
-#define BIGFREQ(b) (ftab[((b)+1) << 8] - ftab[(b) << 8])
-#define SETMASK (1 << 21)
-#define CLEARMASK (~(SETMASK))
-
-static
-void mainSort ( UInt32* ptr, 
-                UChar*  block,
-                UInt16* quadrant, 
-                UInt32* ftab,
-                Int32   nblock,
-                Int32   verb,
-                Int32*  budget )
-{
-   Int32  i, j, k, ss, sb;
-   Int32  runningOrder[256];
-   Bool   bigDone[256];
-   Int32  copyStart[256];
-   Int32  copyEnd  [256];
-   UChar  c1;
-   Int32  numQSorted;
-   UInt16 s;
-   if (verb >= 4) VPrintf0 ( "        main sort initialise ...\n" );
-
-   /*-- set up the 2-byte frequency table --*/
-   for (i = 65536; i >= 0; i--) ftab[i] = 0;
-
-   j = block[0] << 8;
-   i = nblock-1;
-   for (; i >= 3; i -= 4) {
-      quadrant[i] = 0;
-      j = (j >> 8) | ( ((UInt16)block[i]) << 8);
-      ftab[j]++;
-      quadrant[i-1] = 0;
-      j = (j >> 8) | ( ((UInt16)block[i-1]) << 8);
-      ftab[j]++;
-      quadrant[i-2] = 0;
-      j = (j >> 8) | ( ((UInt16)block[i-2]) << 8);
-      ftab[j]++;
-      quadrant[i-3] = 0;
-      j = (j >> 8) | ( ((UInt16)block[i-3]) << 8);
-      ftab[j]++;
-   }
-   for (; i >= 0; i--) {
-      quadrant[i] = 0;
-      j = (j >> 8) | ( ((UInt16)block[i]) << 8);
-      ftab[j]++;
-   }
-
-   /*-- (emphasises close relationship of block & quadrant) --*/
-   for (i = 0; i < BZ_N_OVERSHOOT; i++) {
-      block   [nblock+i] = block[i];
-      quadrant[nblock+i] = 0;
-   }
-
-   if (verb >= 4) VPrintf0 ( "        bucket sorting ...\n" );
-
-   /*-- Complete the initial radix sort --*/
-   for (i = 1; i <= 65536; i++) ftab[i] += ftab[i-1];
-
-   s = block[0] << 8;
-   i = nblock-1;
-   for (; i >= 3; i -= 4) {
-      s = (s >> 8) | (block[i] << 8);
-      j = ftab[s] -1;
-      ftab[s] = j;
-      ptr[j] = i;
-      s = (s >> 8) | (block[i-1] << 8);
-      j = ftab[s] -1;
-      ftab[s] = j;
-      ptr[j] = i-1;
-      s = (s >> 8) | (block[i-2] << 8);
-      j = ftab[s] -1;
-      ftab[s] = j;
-      ptr[j] = i-2;
-      s = (s >> 8) | (block[i-3] << 8);
-      j = ftab[s] -1;
-      ftab[s] = j;
-      ptr[j] = i-3;
-   }
-   for (; i >= 0; i--) {
-      s = (s >> 8) | (block[i] << 8);
-      j = ftab[s] -1;
-      ftab[s] = j;
-      ptr[j] = i;
-   }
-
-   /*--
-      Now ftab contains the first loc of every small bucket.
-      Calculate the running order, from smallest to largest
-      big bucket.
-   --*/
-   for (i = 0; i <= 255; i++) {
-      bigDone     [i] = False;
-      runningOrder[i] = i;
-   }
-
-   {
-      Int32 vv;
-      Int32 h = 1;
-      do h = 3 * h + 1; while (h <= 256);
-      do {
-         h = h / 3;
-         for (i = h; i <= 255; i++) {
-            vv = runningOrder[i];
-            j = i;
-            while ( BIGFREQ(runningOrder[j-h]) > BIGFREQ(vv) ) {
-               runningOrder[j] = runningOrder[j-h];
-               j = j - h;
-               if (j <= (h - 1)) goto zero;
-            }
-            zero:
-            runningOrder[j] = vv;
-         }
-      } while (h != 1);
-   }
-
-   /*--
-      The main sorting loop.
-   --*/
-
-   numQSorted = 0;
-
-   for (i = 0; i <= 255; i++) {
-
-      /*--
-         Process big buckets, starting with the least full.
-         Basically this is a 3-step process in which we call
-         mainQSort3 to sort the small buckets [ss, j], but
-         also make a big effort to avoid the calls if we can.
-      --*/
-      ss = runningOrder[i];
-
-      /*--
-         Step 1:
-         Complete the big bucket [ss] by quicksorting
-         any unsorted small buckets [ss, j], for j != ss.  
-         Hopefully previous pointer-scanning phases have already
-         completed many of the small buckets [ss, j], so
-         we don't have to sort them at all.
-      --*/
-      for (j = 0; j <= 255; j++) {
-         if (j != ss) {
-            sb = (ss << 8) + j;
-            if ( ! (ftab[sb] & SETMASK) ) {
-               Int32 lo = ftab[sb]   & CLEARMASK;
-               Int32 hi = (ftab[sb+1] & CLEARMASK) - 1;
-               if (hi > lo) {
-                  if (verb >= 4)
-                     VPrintf4 ( "        qsort [0x%x, 0x%x]   "
-                                "done %d   this %d\n",
-                                ss, j, numQSorted, hi - lo + 1 );
-                  mainQSort3 ( 
-                     ptr, block, quadrant, nblock, 
-                     lo, hi, BZ_N_RADIX, budget 
-                  );   
-                  numQSorted += (hi - lo + 1);
-                  if (*budget < 0) return;
-               }
-            }
-            ftab[sb] |= SETMASK;
-         }
-      }
-
-      AssertH ( !bigDone[ss], 1006 );
-
-      /*--
-         Step 2:
-         Now scan this big bucket [ss] so as to synthesise the
-         sorted order for small buckets [t, ss] for all t,
-         including, magically, the bucket [ss,ss] too.
-         This will avoid doing Real Work in subsequent Step 1's.
-      --*/
-      {
-         for (j = 0; j <= 255; j++) {
-            copyStart[j] =  ftab[(j << 8) + ss]     & CLEARMASK;
-            copyEnd  [j] = (ftab[(j << 8) + ss + 1] & CLEARMASK) - 1;
-         }
-         for (j = ftab[ss << 8] & CLEARMASK; j < copyStart[ss]; j++) {
-            k = ptr[j]-1; if (k < 0) k += nblock;
-            c1 = block[k];
-            if (!bigDone[c1])
-               ptr[ copyStart[c1]++ ] = k;
-         }
-         for (j = (ftab[(ss+1) << 8] & CLEARMASK) - 1; j > copyEnd[ss]; j--) {
-            k = ptr[j]-1; if (k < 0) k += nblock;
-            c1 = block[k];
-            if (!bigDone[c1]) 
-               ptr[ copyEnd[c1]-- ] = k;
-         }
-      }
-
-      AssertH ( copyStart[ss]-1 == copyEnd[ss], 1007 );
-
-      for (j = 0; j <= 255; j++) ftab[(j << 8) + ss] |= SETMASK;
-
-      /*--
-         Step 3:
-         The [ss] big bucket is now done.  Record this fact,
-         and update the quadrant descriptors.  Remember to
-         update quadrants in the overshoot area too, if
-         necessary.  The "if (i < 255)" test merely skips
-         this updating for the last bucket processed, since
-         updating for the last bucket is pointless.
-
-         The quadrant array provides a way to incrementally
-         cache sort orderings, as they appear, so as to 
-         make subsequent comparisons in fullGtU() complete
-         faster.  For repetitive blocks this makes a big
-         difference (but not big enough to be able to avoid
-         the fallback sorting mechanism, exponential radix sort).
-
-         The precise meaning is: at all times:
-
-            for 0 <= i < nblock and 0 <= j <= nblock
-
-            if block[i] != block[j], 
-
-               then the relative values of quadrant[i] and 
-                    quadrant[j] are meaningless.
-
-               else {
-                  if quadrant[i] < quadrant[j]
-                     then the string starting at i lexicographically
-                     precedes the string starting at j
-
-                  else if quadrant[i] > quadrant[j]
-                     then the string starting at j lexicographically
-                     precedes the string starting at i
-
-                  else
-                     the relative ordering of the strings starting
-                     at i and j has not yet been determined.
-               }
-      --*/
-      bigDone[ss] = True;
-
-      if (i < 255) {
-         Int32 bbStart  = ftab[ss << 8] & CLEARMASK;
-         Int32 bbSize   = (ftab[(ss+1) << 8] & CLEARMASK) - bbStart;
-         Int32 shifts   = 0;
-
-         while ((bbSize >> shifts) > 65534) shifts++;
-
-         for (j = bbSize-1; j >= 0; j--) {
-            Int32 a2update     = ptr[bbStart + j];
-            UInt16 qVal        = (UInt16)(j >> shifts);
-            quadrant[a2update] = qVal;
-            if (a2update < BZ_N_OVERSHOOT)
-               quadrant[a2update + nblock] = qVal;
-         }
-         AssertH ( ((bbSize-1) >> shifts) <= 65535, 1002 );
-      }
-
-   }
-
-   if (verb >= 4)
-      VPrintf3 ( "        %d pointers, %d sorted, %d scanned\n",
-                 nblock, numQSorted, nblock - numQSorted );
-}
-
-#undef BIGFREQ
-#undef SETMASK
-#undef CLEARMASK
-
-
-/*---------------------------------------------*/
-/* Pre:
-      nblock > 0
-      arr2 exists for [0 .. nblock-1 +N_OVERSHOOT]
-      ((UChar*)arr2)  [0 .. nblock-1] holds block
-      arr1 exists for [0 .. nblock-1]
-
-   Post:
-      ((UChar*)arr2) [0 .. nblock-1] holds block
-      All other areas of block destroyed
-      ftab [ 0 .. 65536 ] destroyed
-      arr1 [0 .. nblock-1] holds sorted order
-*/
-void BZ2_blockSort ( EState* s )
-{
-   UInt32* ptr    = s->ptr; 
-   UChar*  block  = s->block;
-   UInt32* ftab   = s->ftab;
-   Int32   nblock = s->nblock;
-   Int32   verb   = s->verbosity;
-   Int32   wfact  = s->workFactor;
-   UInt16* quadrant;
-   Int32   budget;
-   Int32   budgetInit;
-   Int32   i;
-
-   if (nblock < 10000) {
-      fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb );
-   } else {
-      /* Calculate the location for quadrant, remembering to get
-         the alignment right.  Assumes that &(block[0]) is at least
-         2-byte aligned -- this should be ok since block is really
-         the first section of arr2.
-      */
-      i = nblock+BZ_N_OVERSHOOT;
-      if (i & 1) i++;
-      quadrant = (UInt16*)(&(block[i]));
-
-      /* (wfact-1) / 3 puts the default-factor-30
-         transition point at very roughly the same place as 
-         with v0.1 and v0.9.0.  
-         Not that it particularly matters any more, since the
-         resulting compressed stream is now the same regardless
-         of whether or not we use the main sort or fallback sort.
-      */
-      if (wfact < 1  ) wfact = 1;
-      if (wfact > 100) wfact = 100;
-      budgetInit = nblock * ((wfact-1) / 3);
-      budget = budgetInit;
-
-      mainSort ( ptr, block, quadrant, ftab, nblock, verb, &budget );
-      if (verb >= 3) 
-         VPrintf3 ( "      %d work, %d block, ratio %5.2f\n",
-                    budgetInit - budget,
-                    nblock, 
-                    (float)(budgetInit - budget) /
-                    (float)(nblock==0 ? 1 : nblock) ); 
-      if (budget < 0) {
-         if (verb >= 2) 
-            VPrintf0 ( "    too repetitive; using fallback"
-                       " sorting algorithm\n" );
-         fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb );
-      }
-   }
-
-   s->origPtr = -1;
-   for (i = 0; i < s->nblock; i++)
-      if (ptr[i] == 0)
-         { s->origPtr = i; break; };
-
-   AssertH( s->origPtr != -1, 1003 );
-}
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                       blocksort.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/bzlib.c b/mdk-stage1/bzlib/bzlib.c
deleted file mode 100644
index b1fc85236..000000000
--- a/mdk-stage1/bzlib/bzlib.c
+++ /dev/null
@@ -1,1567 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Library top-level functions.                          ---*/
-/*---                                               bzlib.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-/*--
-   CHANGES
-   ~~~~~~~
-   0.9.0 -- original version.
-
-   0.9.0a/b -- no changes in this file.
-
-   0.9.0c
-      * made zero-length BZ_FLUSH work correctly in bzCompress().
-      * fixed bzWrite/bzRead to ignore zero-length requests.
-      * fixed bzread to correctly handle read requests after EOF.
-      * wrong parameter order in call to bzDecompressInit in
-        bzBuffToBuffDecompress.  Fixed.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-
-#include "bzlib_private.h"
-
-
-/*---------------------------------------------------*/
-/*--- Compression stuff                           ---*/
-/*---------------------------------------------------*/
-
-
-/*---------------------------------------------------*/
-#ifndef BZ_NO_STDIO
-void BZ2_bz__AssertH__fail ( int errcode )
-{
-   fprintf(stderr, 
-      "\n\nbzip2/libbzip2: internal error number %d.\n"
-      "This is a bug in bzip2/libbzip2, %s.\n"
-      "Please report it to me at: jseward@acm.org.  If this happened\n"
-      "when you were using some program which uses libbzip2 as a\n"
-      "component, you should also report this bug to the author(s)\n"
-      "of that program.  Please make an effort to report this bug;\n"
-      "timely and accurate bug reports eventually lead to higher\n"
-      "quality software.  Thanks.  Julian Seward, 21 March 2000.\n\n",
-      errcode,
-      BZ2_bzlibVersion()
-   );
-   exit(3);
-}
-#endif
-
-
-/*---------------------------------------------------*/
-static
-int bz_config_ok ( void )
-{
-   if (sizeof(int)   != 4) return 0;
-   if (sizeof(short) != 2) return 0;
-   if (sizeof(char)  != 1) return 0;
-   return 1;
-}
-
-
-/*---------------------------------------------------*/
-static
-void* default_bzalloc ( void* opaque __attribute__ ((unused)), Int32 items, Int32 size )
-{
-   void* v = malloc ( items * size );
-   return v;
-}
-
-static
-void default_bzfree ( void* opaque __attribute__ ((unused)), void* addr )
-{
-   if (addr != NULL) free ( addr );
-}
-
-
-/*---------------------------------------------------*/
-static
-void prepare_new_block ( EState* s )
-{
-   Int32 i;
-   s->nblock = 0;
-   s->numZ = 0;
-   s->state_out_pos = 0;
-   BZ_INITIALISE_CRC ( s->blockCRC );
-   for (i = 0; i < 256; i++) s->inUse[i] = False;
-   s->blockNo++;
-}
-
-
-/*---------------------------------------------------*/
-static
-void init_RL ( EState* s )
-{
-   s->state_in_ch  = 256;
-   s->state_in_len = 0;
-}
-
-
-static
-Bool isempty_RL ( EState* s )
-{
-   if (s->state_in_ch < 256 && s->state_in_len > 0)
-      return False; else
-      return True;
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzCompressInit) 
-                    ( bz_stream* strm, 
-                     int        blockSize100k,
-                     int        verbosity,
-                     int        workFactor )
-{
-   Int32   n;
-   EState* s;
-
-   if (!bz_config_ok()) return BZ_CONFIG_ERROR;
-
-   if (strm == NULL || 
-       blockSize100k < 1 || blockSize100k > 9 ||
-       workFactor < 0 || workFactor > 250)
-     return BZ_PARAM_ERROR;
-
-   if (workFactor == 0) workFactor = 30;
-   if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
-   if (strm->bzfree == NULL) strm->bzfree = default_bzfree;
-
-   s = BZALLOC( sizeof(EState) );
-   if (s == NULL) return BZ_MEM_ERROR;
-   s->strm = strm;
-
-   s->arr1 = NULL;
-   s->arr2 = NULL;
-   s->ftab = NULL;
-
-   n       = 100000 * blockSize100k;
-   s->arr1 = BZALLOC( n                  * sizeof(UInt32) );
-   s->arr2 = BZALLOC( (n+BZ_N_OVERSHOOT) * sizeof(UInt32) );
-   s->ftab = BZALLOC( 65537              * sizeof(UInt32) );
-
-   if (s->arr1 == NULL || s->arr2 == NULL || s->ftab == NULL) {
-      if (s->arr1 != NULL) BZFREE(s->arr1);
-      if (s->arr2 != NULL) BZFREE(s->arr2);
-      if (s->ftab != NULL) BZFREE(s->ftab);
-      if (s       != NULL) BZFREE(s);
-      return BZ_MEM_ERROR;
-   }
-
-   s->blockNo           = 0;
-   s->state             = BZ_S_INPUT;
-   s->mode              = BZ_M_RUNNING;
-   s->combinedCRC       = 0;
-   s->blockSize100k     = blockSize100k;
-   s->nblockMAX         = 100000 * blockSize100k - 19;
-   s->verbosity         = verbosity;
-   s->workFactor        = workFactor;
-
-   s->block             = (UChar*)s->arr2;
-   s->mtfv              = (UInt16*)s->arr1;
-   s->zbits             = NULL;
-   s->ptr               = (UInt32*)s->arr1;
-
-   strm->state          = s;
-   strm->total_in_lo32  = 0;
-   strm->total_in_hi32  = 0;
-   strm->total_out_lo32 = 0;
-   strm->total_out_hi32 = 0;
-   init_RL ( s );
-   prepare_new_block ( s );
-   return BZ_OK;
-}
-
-
-/*---------------------------------------------------*/
-static
-void add_pair_to_block ( EState* s )
-{
-   Int32 i;
-   UChar ch = (UChar)(s->state_in_ch);
-   for (i = 0; i < s->state_in_len; i++) {
-      BZ_UPDATE_CRC( s->blockCRC, ch );
-   }
-   s->inUse[s->state_in_ch] = True;
-   switch (s->state_in_len) {
-      case 1:
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         break;
-      case 2:
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         break;
-      case 3:
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         break;
-      default:
-         s->inUse[s->state_in_len-4] = True;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = ((UChar)(s->state_in_len-4));
-         s->nblock++;
-         break;
-   }
-}
-
-
-/*---------------------------------------------------*/
-static
-void flush_RL ( EState* s )
-{
-   if (s->state_in_ch < 256) add_pair_to_block ( s );
-   init_RL ( s );
-}
-
-
-/*---------------------------------------------------*/
-#define ADD_CHAR_TO_BLOCK(zs,zchh0)               \
-{                                                 \
-   UInt32 zchh = (UInt32)(zchh0);                 \
-   /*-- fast track the common case --*/           \
-   if (zchh != zs->state_in_ch &&                 \
-       zs->state_in_len == 1) {                   \
-      UChar ch = (UChar)(zs->state_in_ch);        \
-      BZ_UPDATE_CRC( zs->blockCRC, ch );          \
-      zs->inUse[zs->state_in_ch] = True;          \
-      zs->block[zs->nblock] = (UChar)ch;          \
-      zs->nblock++;                               \
-      zs->state_in_ch = zchh;                     \
-   }                                              \
-   else                                           \
-   /*-- general, uncommon cases --*/              \
-   if (zchh != zs->state_in_ch ||                 \
-      zs->state_in_len == 255) {                  \
-      if (zs->state_in_ch < 256)                  \
-         add_pair_to_block ( zs );                \
-      zs->state_in_ch = zchh;                     \
-      zs->state_in_len = 1;                       \
-   } else {                                       \
-      zs->state_in_len++;                         \
-   }                                              \
-}
-
-
-/*---------------------------------------------------*/
-static
-Bool copy_input_until_stop ( EState* s )
-{
-   Bool progress_in = False;
-
-   if (s->mode == BZ_M_RUNNING) {
-
-      /*-- fast track the common case --*/
-      while (True) {
-         /*-- block full? --*/
-         if (s->nblock >= s->nblockMAX) break;
-         /*-- no input? --*/
-         if (s->strm->avail_in == 0) break;
-         progress_in = True;
-         ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) ); 
-         s->strm->next_in++;
-         s->strm->avail_in--;
-         s->strm->total_in_lo32++;
-         if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
-      }
-
-   } else {
-
-      /*-- general, uncommon case --*/
-      while (True) {
-         /*-- block full? --*/
-         if (s->nblock >= s->nblockMAX) break;
-         /*-- no input? --*/
-         if (s->strm->avail_in == 0) break;
-         /*-- flush/finish end? --*/
-         if (s->avail_in_expect == 0) break;
-         progress_in = True;
-         ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) ); 
-         s->strm->next_in++;
-         s->strm->avail_in--;
-         s->strm->total_in_lo32++;
-         if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
-         s->avail_in_expect--;
-      }
-   }
-   return progress_in;
-}
-
-
-/*---------------------------------------------------*/
-static
-Bool copy_output_until_stop ( EState* s )
-{
-   Bool progress_out = False;
-
-   while (True) {
-
-      /*-- no output space? --*/
-      if (s->strm->avail_out == 0) break;
-
-      /*-- block done? --*/
-      if (s->state_out_pos >= s->numZ) break;
-
-      progress_out = True;
-      *(s->strm->next_out) = s->zbits[s->state_out_pos];
-      s->state_out_pos++;
-      s->strm->avail_out--;
-      s->strm->next_out++;
-      s->strm->total_out_lo32++;
-      if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
-   }
-
-   return progress_out;
-}
-
-
-/*---------------------------------------------------*/
-static
-Bool handle_compress ( bz_stream* strm )
-{
-   Bool progress_in  = False;
-   Bool progress_out = False;
-   EState* s = strm->state;
-   
-   while (True) {
-
-      if (s->state == BZ_S_OUTPUT) {
-         progress_out |= copy_output_until_stop ( s );
-         if (s->state_out_pos < s->numZ) break;
-         if (s->mode == BZ_M_FINISHING && 
-             s->avail_in_expect == 0 &&
-             isempty_RL(s)) break;
-         prepare_new_block ( s );
-         s->state = BZ_S_INPUT;
-         if (s->mode == BZ_M_FLUSHING && 
-             s->avail_in_expect == 0 &&
-             isempty_RL(s)) break;
-      }
-
-      if (s->state == BZ_S_INPUT) {
-         progress_in |= copy_input_until_stop ( s );
-         if (s->mode != BZ_M_RUNNING && s->avail_in_expect == 0) {
-            flush_RL ( s );
-            BZ2_compressBlock ( s, (Bool)(s->mode == BZ_M_FINISHING) );
-            s->state = BZ_S_OUTPUT;
-         }
-         else
-         if (s->nblock >= s->nblockMAX) {
-            BZ2_compressBlock ( s, False );
-            s->state = BZ_S_OUTPUT;
-         }
-         else
-         if (s->strm->avail_in == 0) {
-            break;
-         }
-      }
-
-   }
-
-   return progress_in || progress_out;
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzCompress) ( bz_stream *strm, int action )
-{
-   Bool progress;
-   EState* s;
-   if (strm == NULL) return BZ_PARAM_ERROR;
-   s = strm->state;
-   if (s == NULL) return BZ_PARAM_ERROR;
-   if (s->strm != strm) return BZ_PARAM_ERROR;
-
-   preswitch:
-   switch (s->mode) {
-
-      case BZ_M_IDLE:
-         return BZ_SEQUENCE_ERROR;
-
-      case BZ_M_RUNNING:
-         if (action == BZ_RUN) {
-            progress = handle_compress ( strm );
-            return progress ? BZ_RUN_OK : BZ_PARAM_ERROR;
-         } 
-         else
-	 if (action == BZ_FLUSH) {
-            s->avail_in_expect = strm->avail_in;
-            s->mode = BZ_M_FLUSHING;
-            goto preswitch;
-         }
-         else
-         if (action == BZ_FINISH) {
-            s->avail_in_expect = strm->avail_in;
-            s->mode = BZ_M_FINISHING;
-            goto preswitch;
-         }
-         else 
-            return BZ_PARAM_ERROR;
-
-      case BZ_M_FLUSHING:
-         if (action != BZ_FLUSH) return BZ_SEQUENCE_ERROR;
-         if (s->avail_in_expect != s->strm->avail_in) 
-            return BZ_SEQUENCE_ERROR;
-         progress = handle_compress ( strm );
-         if (s->avail_in_expect > 0 || !isempty_RL(s) ||
-             s->state_out_pos < s->numZ) return BZ_FLUSH_OK;
-         s->mode = BZ_M_RUNNING;
-         return BZ_RUN_OK;
-
-      case BZ_M_FINISHING:
-         if (action != BZ_FINISH) return BZ_SEQUENCE_ERROR;
-         if (s->avail_in_expect != s->strm->avail_in) 
-            return BZ_SEQUENCE_ERROR;
-         progress = handle_compress ( strm );
-         if (!progress) return BZ_SEQUENCE_ERROR;
-         if (s->avail_in_expect > 0 || !isempty_RL(s) ||
-             s->state_out_pos < s->numZ) return BZ_FINISH_OK;
-         s->mode = BZ_M_IDLE;
-         return BZ_STREAM_END;
-   }
-   return BZ_OK; /*--not reached--*/
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzCompressEnd)  ( bz_stream *strm )
-{
-   EState* s;
-   if (strm == NULL) return BZ_PARAM_ERROR;
-   s = strm->state;
-   if (s == NULL) return BZ_PARAM_ERROR;
-   if (s->strm != strm) return BZ_PARAM_ERROR;
-
-   if (s->arr1 != NULL) BZFREE(s->arr1);
-   if (s->arr2 != NULL) BZFREE(s->arr2);
-   if (s->ftab != NULL) BZFREE(s->ftab);
-   BZFREE(strm->state);
-
-   strm->state = NULL;   
-
-   return BZ_OK;
-}
-
-
-/*---------------------------------------------------*/
-/*--- Decompression stuff                         ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzDecompressInit) 
-                     ( bz_stream* strm, 
-                       int        verbosity,
-                       int        small )
-{
-   DState* s;
-
-   if (!bz_config_ok()) return BZ_CONFIG_ERROR;
-
-   if (strm == NULL) return BZ_PARAM_ERROR;
-   if (small != 0 && small != 1) return BZ_PARAM_ERROR;
-   if (verbosity < 0 || verbosity > 4) return BZ_PARAM_ERROR;
-
-   if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
-   if (strm->bzfree == NULL) strm->bzfree = default_bzfree;
-
-   s = BZALLOC( sizeof(DState) );
-   if (s == NULL) return BZ_MEM_ERROR;
-   s->strm                  = strm;
-   strm->state              = s;
-   s->state                 = BZ_X_MAGIC_1;
-   s->bsLive                = 0;
-   s->bsBuff                = 0;
-   s->calculatedCombinedCRC = 0;
-   strm->total_in_lo32      = 0;
-   strm->total_in_hi32      = 0;
-   strm->total_out_lo32     = 0;
-   strm->total_out_hi32     = 0;
-   s->smallDecompress       = (Bool)small;
-   s->ll4                   = NULL;
-   s->ll16                  = NULL;
-   s->tt                    = NULL;
-   s->currBlockNo           = 0;
-   s->verbosity             = verbosity;
-
-   return BZ_OK;
-}
-
-
-/*---------------------------------------------------*/
-static
-void unRLE_obuf_to_output_FAST ( DState* s )
-{
-   UChar k1;
-
-   if (s->blockRandomised) {
-
-      while (True) {
-         /* try to finish existing run */
-         while (True) {
-            if (s->strm->avail_out == 0) return;
-            if (s->state_out_len == 0) break;
-            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
-            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
-            s->state_out_len--;
-            s->strm->next_out++;
-            s->strm->avail_out--;
-            s->strm->total_out_lo32++;
-            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
-         }
-   
-         /* can a new run be started? */
-         if (s->nblock_used == s->save_nblock+1) return;
-               
-   
-         s->state_out_len = 1;
-         s->state_out_ch = s->k0;
-         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 2;
-         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 3;
-         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         s->state_out_len = ((Int32)k1) + 4;
-         BZ_GET_FAST(s->k0); BZ_RAND_UPD_MASK; 
-         s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
-      }
-
-   } else {
-
-      /* restore */
-      UInt32        c_calculatedBlockCRC = s->calculatedBlockCRC;
-      UChar         c_state_out_ch       = s->state_out_ch;
-      Int32         c_state_out_len      = s->state_out_len;
-      Int32         c_nblock_used        = s->nblock_used;
-      Int32         c_k0                 = s->k0;
-      UInt32*       c_tt                 = s->tt;
-      UInt32        c_tPos               = s->tPos;
-      char*         cs_next_out          = s->strm->next_out;
-      unsigned int  cs_avail_out         = s->strm->avail_out;
-      /* end restore */
-
-      UInt32       avail_out_INIT = cs_avail_out;
-      Int32        s_save_nblockPP = s->save_nblock+1;
-      unsigned int total_out_lo32_old;
-
-      while (True) {
-
-         /* try to finish existing run */
-         if (c_state_out_len > 0) {
-            while (True) {
-               if (cs_avail_out == 0) goto return_notr;
-               if (c_state_out_len == 1) break;
-               *( (UChar*)(cs_next_out) ) = c_state_out_ch;
-               BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
-               c_state_out_len--;
-               cs_next_out++;
-               cs_avail_out--;
-            }
-            s_state_out_len_eq_one:
-            {
-               if (cs_avail_out == 0) { 
-                  c_state_out_len = 1; goto return_notr;
-               };
-               *( (UChar*)(cs_next_out) ) = c_state_out_ch;
-               BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
-               cs_next_out++;
-               cs_avail_out--;
-            }
-         }   
-         /* can a new run be started? */
-         if (c_nblock_used == s_save_nblockPP) {
-            c_state_out_len = 0; goto return_notr;
-         };   
-         c_state_out_ch = c_k0;
-         BZ_GET_FAST_C(k1); c_nblock_used++;
-         if (k1 != c_k0) { 
-            c_k0 = k1; goto s_state_out_len_eq_one; 
-         };
-         if (c_nblock_used == s_save_nblockPP) 
-            goto s_state_out_len_eq_one;
-   
-         c_state_out_len = 2;
-         BZ_GET_FAST_C(k1); c_nblock_used++;
-         if (c_nblock_used == s_save_nblockPP) continue;
-         if (k1 != c_k0) { c_k0 = k1; continue; };
-   
-         c_state_out_len = 3;
-         BZ_GET_FAST_C(k1); c_nblock_used++;
-         if (c_nblock_used == s_save_nblockPP) continue;
-         if (k1 != c_k0) { c_k0 = k1; continue; };
-   
-         BZ_GET_FAST_C(k1); c_nblock_used++;
-         c_state_out_len = ((Int32)k1) + 4;
-         BZ_GET_FAST_C(c_k0); c_nblock_used++;
-      }
-
-      return_notr:
-      total_out_lo32_old = s->strm->total_out_lo32;
-      s->strm->total_out_lo32 += (avail_out_INIT - cs_avail_out);
-      if (s->strm->total_out_lo32 < total_out_lo32_old)
-         s->strm->total_out_hi32++;
-
-      /* save */
-      s->calculatedBlockCRC = c_calculatedBlockCRC;
-      s->state_out_ch       = c_state_out_ch;
-      s->state_out_len      = c_state_out_len;
-      s->nblock_used        = c_nblock_used;
-      s->k0                 = c_k0;
-      s->tt                 = c_tt;
-      s->tPos               = c_tPos;
-      s->strm->next_out     = cs_next_out;
-      s->strm->avail_out    = cs_avail_out;
-      /* end save */
-   }
-}
-
-
-
-/*---------------------------------------------------*/
-__inline__ Int32 BZ2_indexIntoF ( Int32 indx, Int32 *cftab )
-{
-   Int32 nb, na, mid;
-   nb = 0;
-   na = 256;
-   do {
-      mid = (nb + na) >> 1;
-      if (indx >= cftab[mid]) nb = mid; else na = mid;
-   }
-   while (na - nb != 1);
-   return nb;
-}
-
-
-/*---------------------------------------------------*/
-static
-void unRLE_obuf_to_output_SMALL ( DState* s )
-{
-   UChar k1;
-
-   if (s->blockRandomised) {
-
-      while (True) {
-         /* try to finish existing run */
-         while (True) {
-            if (s->strm->avail_out == 0) return;
-            if (s->state_out_len == 0) break;
-            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
-            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
-            s->state_out_len--;
-            s->strm->next_out++;
-            s->strm->avail_out--;
-            s->strm->total_out_lo32++;
-            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
-         }
-   
-         /* can a new run be started? */
-         if (s->nblock_used == s->save_nblock+1) return;
-               
-   
-         s->state_out_len = 1;
-         s->state_out_ch = s->k0;
-         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 2;
-         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 3;
-         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         s->state_out_len = ((Int32)k1) + 4;
-         BZ_GET_SMALL(s->k0); BZ_RAND_UPD_MASK; 
-         s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
-      }
-
-   } else {
-
-      while (True) {
-         /* try to finish existing run */
-         while (True) {
-            if (s->strm->avail_out == 0) return;
-            if (s->state_out_len == 0) break;
-            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
-            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
-            s->state_out_len--;
-            s->strm->next_out++;
-            s->strm->avail_out--;
-            s->strm->total_out_lo32++;
-            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
-         }
-   
-         /* can a new run be started? */
-         if (s->nblock_used == s->save_nblock+1) return;
-   
-         s->state_out_len = 1;
-         s->state_out_ch = s->k0;
-         BZ_GET_SMALL(k1); s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 2;
-         BZ_GET_SMALL(k1); s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 3;
-         BZ_GET_SMALL(k1); s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         BZ_GET_SMALL(k1); s->nblock_used++;
-         s->state_out_len = ((Int32)k1) + 4;
-         BZ_GET_SMALL(s->k0); s->nblock_used++;
-      }
-
-   }
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzDecompress) ( bz_stream *strm )
-{
-   DState* s;
-   if (strm == NULL) return BZ_PARAM_ERROR;
-   s = strm->state;
-   if (s == NULL) return BZ_PARAM_ERROR;
-   if (s->strm != strm) return BZ_PARAM_ERROR;
-
-   while (True) {
-      if (s->state == BZ_X_IDLE) return BZ_SEQUENCE_ERROR;
-      if (s->state == BZ_X_OUTPUT) {
-         if (s->smallDecompress)
-            unRLE_obuf_to_output_SMALL ( s ); else
-            unRLE_obuf_to_output_FAST  ( s );
-         if (s->nblock_used == s->save_nblock+1 && s->state_out_len == 0) {
-            BZ_FINALISE_CRC ( s->calculatedBlockCRC );
-            if (s->verbosity >= 3) 
-               VPrintf2 ( " {0x%x, 0x%x}", s->storedBlockCRC, 
-                          s->calculatedBlockCRC );
-            if (s->verbosity >= 2) VPrintf0 ( "]" );
-            if (s->calculatedBlockCRC != s->storedBlockCRC)
-               return BZ_DATA_ERROR;
-            s->calculatedCombinedCRC 
-               = (s->calculatedCombinedCRC << 1) | 
-                    (s->calculatedCombinedCRC >> 31);
-            s->calculatedCombinedCRC ^= s->calculatedBlockCRC;
-            s->state = BZ_X_BLKHDR_1;
-         } else {
-            return BZ_OK;
-         }
-      }
-      if (s->state >= BZ_X_MAGIC_1) {
-         Int32 r = BZ2_decompress ( s );
-         if (r == BZ_STREAM_END) {
-            if (s->verbosity >= 3)
-               VPrintf2 ( "\n    combined CRCs: stored = 0x%x, computed = 0x%x", 
-                          s->storedCombinedCRC, s->calculatedCombinedCRC );
-            if (s->calculatedCombinedCRC != s->storedCombinedCRC)
-               return BZ_DATA_ERROR;
-            return r;
-         }
-         if (s->state != BZ_X_OUTPUT) return r;
-      }
-   }
-
-   AssertH ( 0, 6001 );
-
-   return 0;  /*NOTREACHED*/
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzDecompressEnd)  ( bz_stream *strm )
-{
-   DState* s;
-   if (strm == NULL) return BZ_PARAM_ERROR;
-   s = strm->state;
-   if (s == NULL) return BZ_PARAM_ERROR;
-   if (s->strm != strm) return BZ_PARAM_ERROR;
-
-   if (s->tt   != NULL) BZFREE(s->tt);
-   if (s->ll16 != NULL) BZFREE(s->ll16);
-   if (s->ll4  != NULL) BZFREE(s->ll4);
-
-   BZFREE(strm->state);
-   strm->state = NULL;
-
-   return BZ_OK;
-}
-
-
-#ifndef BZ_NO_STDIO
-/*---------------------------------------------------*/
-/*--- File I/O stuff                              ---*/
-/*---------------------------------------------------*/
-
-#define BZ_SETERR(eee)                    \
-{                                         \
-   if (bzerror != NULL) *bzerror = eee;   \
-   if (bzf != NULL) bzf->lastErr = eee;   \
-}
-
-typedef 
-   struct {
-      FILE*     handle;
-      Char      buf[BZ_MAX_UNUSED];
-      Int32     bufN;
-      Bool      writing;
-      bz_stream strm;
-      Int32     lastErr;
-      Bool      initialisedOk;
-   }
-   bzFile;
-
-
-/*---------------------------------------------*/
-static Bool myfeof ( FILE* f )
-{
-	return feof(f) ? True : False;
-}
-
-
-/*---------------------------------------------------*/
-BZFILE* BZ_API(BZ2_bzWriteOpen) 
-                    ( int*  bzerror,      
-                      FILE* f, 
-                      int   blockSize100k, 
-                      int   verbosity,
-                      int   workFactor )
-{
-   Int32   ret;
-   bzFile* bzf = NULL;
-
-   BZ_SETERR(BZ_OK);
-
-   if (f == NULL ||
-       (blockSize100k < 1 || blockSize100k > 9) ||
-       (workFactor < 0 || workFactor > 250) ||
-       (verbosity < 0 || verbosity > 4))
-      { BZ_SETERR(BZ_PARAM_ERROR); return NULL; };
-
-   if (ferror(f))
-      { BZ_SETERR(BZ_IO_ERROR); return NULL; };
-
-   bzf = malloc ( sizeof(bzFile) );
-   if (bzf == NULL)
-      { BZ_SETERR(BZ_MEM_ERROR); return NULL; };
-
-   BZ_SETERR(BZ_OK);
-   bzf->initialisedOk = False;
-   bzf->bufN          = 0;
-   bzf->handle        = f;
-   bzf->writing       = True;
-   bzf->strm.bzalloc  = NULL;
-   bzf->strm.bzfree   = NULL;
-   bzf->strm.opaque   = NULL;
-
-   if (workFactor == 0) workFactor = 30;
-   ret = BZ2_bzCompressInit ( &(bzf->strm), blockSize100k, 
-                              verbosity, workFactor );
-   if (ret != BZ_OK)
-      { BZ_SETERR(ret); free(bzf); return NULL; };
-
-   bzf->strm.avail_in = 0;
-   bzf->initialisedOk = True;
-   return bzf;   
-}
-
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzWrite)
-             ( int*    bzerror, 
-               BZFILE* b, 
-               void*   buf, 
-               int     len )
-{
-   Int32 n, n2, ret;
-   bzFile* bzf = (bzFile*)b;
-
-   BZ_SETERR(BZ_OK);
-   if (bzf == NULL || buf == NULL || len < 0)
-      { BZ_SETERR(BZ_PARAM_ERROR); return; };
-   if (!(bzf->writing))
-      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
-   if (ferror(bzf->handle))
-      { BZ_SETERR(BZ_IO_ERROR); return; };
-
-   if (len == 0)
-      { BZ_SETERR(BZ_OK); return; };
-
-   bzf->strm.avail_in = len;
-   bzf->strm.next_in  = buf;
-
-   while (True) {
-      bzf->strm.avail_out = BZ_MAX_UNUSED;
-      bzf->strm.next_out = bzf->buf;
-      ret = BZ2_bzCompress ( &(bzf->strm), BZ_RUN );
-      if (ret != BZ_RUN_OK)
-         { BZ_SETERR(ret); return; };
-
-      if (bzf->strm.avail_out < BZ_MAX_UNUSED) {
-         n = BZ_MAX_UNUSED - bzf->strm.avail_out;
-         n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar), 
-                       n, bzf->handle );
-         if (n != n2 || ferror(bzf->handle))
-            { BZ_SETERR(BZ_IO_ERROR); return; };
-      }
-
-      if (bzf->strm.avail_in == 0)
-         { BZ_SETERR(BZ_OK); return; };
-   }
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzWriteClose)
-                  ( int*          bzerror, 
-                    BZFILE*       b, 
-                    int           abandon,
-                    unsigned int* nbytes_in,
-                    unsigned int* nbytes_out )
-{
-   BZ2_bzWriteClose64 ( bzerror, b, abandon, 
-                        nbytes_in, NULL, nbytes_out, NULL );
-}
-
-
-void BZ_API(BZ2_bzWriteClose64)
-                  ( int*          bzerror, 
-                    BZFILE*       b, 
-                    int           abandon,
-                    unsigned int* nbytes_in_lo32,
-                    unsigned int* nbytes_in_hi32,
-                    unsigned int* nbytes_out_lo32,
-                    unsigned int* nbytes_out_hi32 )
-{
-   Int32   n, n2, ret;
-   bzFile* bzf = (bzFile*)b;
-
-   if (bzf == NULL)
-      { BZ_SETERR(BZ_OK); return; };
-   if (!(bzf->writing))
-      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
-   if (ferror(bzf->handle))
-      { BZ_SETERR(BZ_IO_ERROR); return; };
-
-   if (nbytes_in_lo32 != NULL) *nbytes_in_lo32 = 0;
-   if (nbytes_in_hi32 != NULL) *nbytes_in_hi32 = 0;
-   if (nbytes_out_lo32 != NULL) *nbytes_out_lo32 = 0;
-   if (nbytes_out_hi32 != NULL) *nbytes_out_hi32 = 0;
-
-   if ((!abandon) && bzf->lastErr == BZ_OK) {
-      while (True) {
-         bzf->strm.avail_out = BZ_MAX_UNUSED;
-         bzf->strm.next_out = bzf->buf;
-         ret = BZ2_bzCompress ( &(bzf->strm), BZ_FINISH );
-         if (ret != BZ_FINISH_OK && ret != BZ_STREAM_END)
-            { BZ_SETERR(ret); return; };
-
-         if (bzf->strm.avail_out < BZ_MAX_UNUSED) {
-            n = BZ_MAX_UNUSED - bzf->strm.avail_out;
-            n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar), 
-                          n, bzf->handle );
-            if (n != n2 || ferror(bzf->handle))
-               { BZ_SETERR(BZ_IO_ERROR); return; };
-         }
-
-         if (ret == BZ_STREAM_END) break;
-      }
-   }
-
-   if ( !abandon && !ferror ( bzf->handle ) ) {
-      fflush ( bzf->handle );
-      if (ferror(bzf->handle))
-         { BZ_SETERR(BZ_IO_ERROR); return; };
-   }
-
-   if (nbytes_in_lo32 != NULL)
-      *nbytes_in_lo32 = bzf->strm.total_in_lo32;
-   if (nbytes_in_hi32 != NULL)
-      *nbytes_in_hi32 = bzf->strm.total_in_hi32;
-   if (nbytes_out_lo32 != NULL)
-      *nbytes_out_lo32 = bzf->strm.total_out_lo32;
-   if (nbytes_out_hi32 != NULL)
-      *nbytes_out_hi32 = bzf->strm.total_out_hi32;
-
-   BZ_SETERR(BZ_OK);
-   BZ2_bzCompressEnd ( &(bzf->strm) );
-   free ( bzf );
-}
-
-
-/*---------------------------------------------------*/
-BZFILE* BZ_API(BZ2_bzReadOpen) 
-                   ( int*  bzerror, 
-                     FILE* f, 
-                     int   verbosity,
-                     int   small,
-                     void* unused,
-                     int   nUnused )
-{
-   bzFile* bzf = NULL;
-   int     ret;
-
-   BZ_SETERR(BZ_OK);
-
-   if (f == NULL || 
-       (small != 0 && small != 1) ||
-       (verbosity < 0 || verbosity > 4) ||
-       (unused == NULL && nUnused != 0) ||
-       (unused != NULL && (nUnused < 0 || nUnused > BZ_MAX_UNUSED)))
-      { BZ_SETERR(BZ_PARAM_ERROR); return NULL; };
-
-   if (ferror(f))
-      { BZ_SETERR(BZ_IO_ERROR); return NULL; };
-
-   bzf = malloc ( sizeof(bzFile) );
-   if (bzf == NULL) 
-      { BZ_SETERR(BZ_MEM_ERROR); return NULL; };
-
-   BZ_SETERR(BZ_OK);
-
-   bzf->initialisedOk = False;
-   bzf->handle        = f;
-   bzf->bufN          = 0;
-   bzf->writing       = False;
-   bzf->strm.bzalloc  = NULL;
-   bzf->strm.bzfree   = NULL;
-   bzf->strm.opaque   = NULL;
-   
-   while (nUnused > 0) {
-      bzf->buf[bzf->bufN] = *((UChar*)(unused)); bzf->bufN++;
-      unused = ((void*)( 1 + ((UChar*)(unused))  ));
-      nUnused--;
-   }
-
-   ret = BZ2_bzDecompressInit ( &(bzf->strm), verbosity, small );
-   if (ret != BZ_OK)
-      { BZ_SETERR(ret); free(bzf); return NULL; };
-
-   bzf->strm.avail_in = bzf->bufN;
-   bzf->strm.next_in  = bzf->buf;
-
-   bzf->initialisedOk = True;
-   return bzf;   
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzReadClose) ( int *bzerror, BZFILE *b )
-{
-   bzFile* bzf = (bzFile*)b;
-
-   BZ_SETERR(BZ_OK);
-   if (bzf == NULL)
-      { BZ_SETERR(BZ_OK); return; };
-
-   if (bzf->writing)
-      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
-
-   if (bzf->initialisedOk)
-      (void)BZ2_bzDecompressEnd ( &(bzf->strm) );
-   free ( bzf );
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzRead) 
-           ( int*    bzerror, 
-             BZFILE* b, 
-             void*   buf, 
-             int     len )
-{
-   Int32   n, ret;
-   bzFile* bzf = (bzFile*)b;
-
-   BZ_SETERR(BZ_OK);
-
-   if (bzf == NULL || buf == NULL || len < 0)
-      { BZ_SETERR(BZ_PARAM_ERROR); return 0; };
-
-   if (bzf->writing)
-      { BZ_SETERR(BZ_SEQUENCE_ERROR); return 0; };
-
-   if (len == 0)
-      { BZ_SETERR(BZ_OK); return 0; };
-
-   bzf->strm.avail_out = len;
-   bzf->strm.next_out = buf;
-
-   while (True) {
-
-      if (ferror(bzf->handle)) 
-         { BZ_SETERR(BZ_IO_ERROR); return 0; };
-
-      if (bzf->strm.avail_in == 0 && !myfeof(bzf->handle)) {
-         n = fread ( bzf->buf, sizeof(UChar), 
-                     BZ_MAX_UNUSED, bzf->handle );
-         if (ferror(bzf->handle))
-            { BZ_SETERR(BZ_IO_ERROR); return 0; };
-         bzf->bufN = n;
-         bzf->strm.avail_in = bzf->bufN;
-         bzf->strm.next_in = bzf->buf;
-      }
-
-      ret = BZ2_bzDecompress ( &(bzf->strm) );
-
-      if (ret != BZ_OK && ret != BZ_STREAM_END)
-         { BZ_SETERR(ret); return 0; };
-
-      if (ret == BZ_OK && myfeof(bzf->handle) && 
-          bzf->strm.avail_in == 0 && bzf->strm.avail_out > 0)
-         { BZ_SETERR(BZ_UNEXPECTED_EOF); return 0; };
-
-      if (ret == BZ_STREAM_END)
-         { BZ_SETERR(BZ_STREAM_END);
-           return len - bzf->strm.avail_out; };
-      if (bzf->strm.avail_out == 0)
-         { BZ_SETERR(BZ_OK); return len; };
-      
-   }
-
-   return 0; /*not reached*/
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzReadGetUnused) 
-                     ( int*    bzerror, 
-                       BZFILE* b, 
-                       void**  unused, 
-                       int*    nUnused )
-{
-   bzFile* bzf = (bzFile*)b;
-   if (bzf == NULL)
-      { BZ_SETERR(BZ_PARAM_ERROR); return; };
-   if (bzf->lastErr != BZ_STREAM_END)
-      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
-   if (unused == NULL || nUnused == NULL)
-      { BZ_SETERR(BZ_PARAM_ERROR); return; };
-
-   BZ_SETERR(BZ_OK);
-   *nUnused = bzf->strm.avail_in;
-   *unused = bzf->strm.next_in;
-}
-#endif
-
-
-/*---------------------------------------------------*/
-/*--- Misc convenience stuff                      ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzBuffToBuffCompress) 
-                         ( char*         dest, 
-                           unsigned int* destLen,
-                           char*         source, 
-                           unsigned int  sourceLen,
-                           int           blockSize100k, 
-                           int           verbosity, 
-                           int           workFactor )
-{
-   bz_stream strm;
-   int ret;
-
-   if (dest == NULL || destLen == NULL || 
-       source == NULL ||
-       blockSize100k < 1 || blockSize100k > 9 ||
-       verbosity < 0 || verbosity > 4 ||
-       workFactor < 0 || workFactor > 250) 
-      return BZ_PARAM_ERROR;
-
-   if (workFactor == 0) workFactor = 30;
-   strm.bzalloc = NULL;
-   strm.bzfree = NULL;
-   strm.opaque = NULL;
-   ret = BZ2_bzCompressInit ( &strm, blockSize100k, 
-                              verbosity, workFactor );
-   if (ret != BZ_OK) return ret;
-
-   strm.next_in = source;
-   strm.next_out = dest;
-   strm.avail_in = sourceLen;
-   strm.avail_out = *destLen;
-
-   ret = BZ2_bzCompress ( &strm, BZ_FINISH );
-   if (ret == BZ_FINISH_OK) goto output_overflow;
-   if (ret != BZ_STREAM_END) goto errhandler;
-
-   /* normal termination */
-   *destLen -= strm.avail_out;   
-   BZ2_bzCompressEnd ( &strm );
-   return BZ_OK;
-
-   output_overflow:
-   BZ2_bzCompressEnd ( &strm );
-   return BZ_OUTBUFF_FULL;
-
-   errhandler:
-   BZ2_bzCompressEnd ( &strm );
-   return ret;
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzBuffToBuffDecompress) 
-                           ( char*         dest, 
-                             unsigned int* destLen,
-                             char*         source, 
-                             unsigned int  sourceLen,
-                             int           small,
-                             int           verbosity )
-{
-   bz_stream strm;
-   int ret;
-
-   if (dest == NULL || destLen == NULL || 
-       source == NULL ||
-       (small != 0 && small != 1) ||
-       verbosity < 0 || verbosity > 4) 
-          return BZ_PARAM_ERROR;
-
-   strm.bzalloc = NULL;
-   strm.bzfree = NULL;
-   strm.opaque = NULL;
-   ret = BZ2_bzDecompressInit ( &strm, verbosity, small );
-   if (ret != BZ_OK) return ret;
-
-   strm.next_in = source;
-   strm.next_out = dest;
-   strm.avail_in = sourceLen;
-   strm.avail_out = *destLen;
-
-   ret = BZ2_bzDecompress ( &strm );
-   if (ret == BZ_OK) goto output_overflow_or_eof;
-   if (ret != BZ_STREAM_END) goto errhandler;
-
-   /* normal termination */
-   *destLen -= strm.avail_out;
-   BZ2_bzDecompressEnd ( &strm );
-   return BZ_OK;
-
-   output_overflow_or_eof:
-   if (strm.avail_out > 0) {
-      BZ2_bzDecompressEnd ( &strm );
-      return BZ_UNEXPECTED_EOF;
-   } else {
-      BZ2_bzDecompressEnd ( &strm );
-      return BZ_OUTBUFF_FULL;
-   };      
-
-   errhandler:
-   BZ2_bzDecompressEnd ( &strm );
-   return ret; 
-}
-
-
-/*---------------------------------------------------*/
-/*--
-   Code contributed by Yoshioka Tsuneo
-   (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
-   to support better zlib compatibility.
-   This code is not _officially_ part of libbzip2 (yet);
-   I haven't tested it, documented it, or considered the
-   threading-safeness of it.
-   If this code breaks, please contact both Yoshioka and me.
---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-/*--
-   return version like "0.9.0c".
---*/
-const char * BZ_API(BZ2_bzlibVersion)(void)
-{
-   return BZ_VERSION;
-}
-
-
-#ifndef BZ_NO_STDIO
-/*---------------------------------------------------*/
-
-#if defined(_WIN32) || defined(OS2) || defined(MSDOS)
-#   include <fcntl.h>
-#   include <io.h>
-#   define SET_BINARY_MODE(file) setmode(fileno(file),O_BINARY)
-#else
-#   define SET_BINARY_MODE(file)
-#endif
-static
-BZFILE * bzopen_or_bzdopen
-               ( const char *path,   /* no use when bzdopen */
-                 int fd,             /* no use when bzdopen */
-                 const char *mode,
-                 int open_mode)      /* bzopen: 0, bzdopen:1 */
-{
-   int    bzerr;
-   char   unused[BZ_MAX_UNUSED];
-   int    blockSize100k = 9;
-   int    writing       = 0;
-   char   mode2[10]     = "";
-   FILE   *fp           = NULL;
-   BZFILE *bzfp         = NULL;
-   int    verbosity     = 0;
-   int    workFactor    = 30;
-   int    smallMode     = 0;
-   int    nUnused       = 0; 
-
-   if (mode == NULL) return NULL;
-   while (*mode) {
-      switch (*mode) {
-      case 'r':
-         writing = 0; break;
-      case 'w':
-         writing = 1; break;
-      case 's':
-         smallMode = 1; break;
-      default:
-         if (isdigit((int)(*mode))) {
-            blockSize100k = *mode-'0';
-         }
-      }
-      mode++;
-   }
-   strcat(mode2, writing ? "w" : "r" );
-   strcat(mode2,"b");   /* binary mode */
-
-   if (open_mode==0) {
-      if (path==NULL || strcmp(path,"")==0) {
-        fp = (writing ? stdout : stdin);
-        SET_BINARY_MODE(fp);
-      } else {
-        fp = fopen(path,mode2);
-      }
-   } else {
-#ifdef BZ_STRICT_ANSI
-      fp = NULL;
-#else
-      fp = fdopen(fd,mode2);
-#endif
-   }
-   if (fp == NULL) return NULL;
-
-   if (writing) {
-      /* Guard against total chaos and anarchy -- JRS */
-      if (blockSize100k < 1) blockSize100k = 1;
-      if (blockSize100k > 9) blockSize100k = 9; 
-      bzfp = BZ2_bzWriteOpen(&bzerr,fp,blockSize100k,
-                             verbosity,workFactor);
-   } else {
-      bzfp = BZ2_bzReadOpen(&bzerr,fp,verbosity,smallMode,
-                            unused,nUnused);
-   }
-   if (bzfp == NULL) {
-      if (fp != stdin && fp != stdout) fclose(fp);
-      return NULL;
-   }
-   return bzfp;
-}
-
-
-/*---------------------------------------------------*/
-/*--
-   open file for read or write.
-      ex) bzopen("file","w9")
-      case path="" or NULL => use stdin or stdout.
---*/
-BZFILE * BZ_API(BZ2_bzopen)
-               ( const char *path,
-                 const char *mode )
-{
-   return bzopen_or_bzdopen(path,-1,mode,/*bzopen*/0);
-}
-
-
-/*---------------------------------------------------*/
-BZFILE * BZ_API(BZ2_bzdopen)
-               ( int fd,
-                 const char *mode )
-{
-   return bzopen_or_bzdopen(NULL,fd,mode,/*bzdopen*/1);
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzread) (BZFILE* b, void* buf, int len )
-{
-   int bzerr, nread;
-   if (((bzFile*)b)->lastErr == BZ_STREAM_END) return 0;
-   nread = BZ2_bzRead(&bzerr,b,buf,len);
-   if (bzerr == BZ_OK || bzerr == BZ_STREAM_END) {
-      return nread;
-   } else {
-      return -1;
-   }
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzwrite) (BZFILE* b, void* buf, int len )
-{
-   int bzerr;
-
-   BZ2_bzWrite(&bzerr,b,buf,len);
-   if(bzerr == BZ_OK){
-      return len;
-   }else{
-      return -1;
-   }
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzflush) (BZFILE *b __attribute__ ((unused)))
-{
-   /* do nothing now... */
-   return 0;
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzclose) (BZFILE* b)
-{
-   int bzerr;
-   FILE *fp = ((bzFile *)b)->handle;
-   
-   if (b==NULL) {return;}
-   if(((bzFile*)b)->writing){
-      BZ2_bzWriteClose(&bzerr,b,0,NULL,NULL);
-      if(bzerr != BZ_OK){
-         BZ2_bzWriteClose(NULL,b,1,NULL,NULL);
-      }
-   }else{
-      BZ2_bzReadClose(&bzerr,b);
-   }
-   if(fp!=stdin && fp!=stdout){
-      fclose(fp);
-   }
-}
-
-
-/*---------------------------------------------------*/
-/*--
-   return last error code 
---*/
-static char *bzerrorstrings[] = {
-       "OK"
-      ,"SEQUENCE_ERROR"
-      ,"PARAM_ERROR"
-      ,"MEM_ERROR"
-      ,"DATA_ERROR"
-      ,"DATA_ERROR_MAGIC"
-      ,"IO_ERROR"
-      ,"UNEXPECTED_EOF"
-      ,"OUTBUFF_FULL"
-      ,"CONFIG_ERROR"
-      ,"???"   /* for future */
-      ,"???"   /* for future */
-      ,"???"   /* for future */
-      ,"???"   /* for future */
-      ,"???"   /* for future */
-      ,"???"   /* for future */
-};
-
-
-const char * BZ_API(BZ2_bzerror) (BZFILE *b, int *errnum)
-{
-   int err = ((bzFile *)b)->lastErr;
-
-   if(err>0) err = 0;
-   *errnum = err;
-   return bzerrorstrings[err*-1];
-}
-#endif
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                           bzlib.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/bzlib.h b/mdk-stage1/bzlib/bzlib.h
deleted file mode 100644
index c9447a295..000000000
--- a/mdk-stage1/bzlib/bzlib.h
+++ /dev/null
@@ -1,319 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Public header file for the library.                   ---*/
-/*---                                               bzlib.h ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-
-#ifndef _BZLIB_H
-#define _BZLIB_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define BZ_RUN               0
-#define BZ_FLUSH             1
-#define BZ_FINISH            2
-
-#define BZ_OK                0
-#define BZ_RUN_OK            1
-#define BZ_FLUSH_OK          2
-#define BZ_FINISH_OK         3
-#define BZ_STREAM_END        4
-#define BZ_SEQUENCE_ERROR    (-1)
-#define BZ_PARAM_ERROR       (-2)
-#define BZ_MEM_ERROR         (-3)
-#define BZ_DATA_ERROR        (-4)
-#define BZ_DATA_ERROR_MAGIC  (-5)
-#define BZ_IO_ERROR          (-6)
-#define BZ_UNEXPECTED_EOF    (-7)
-#define BZ_OUTBUFF_FULL      (-8)
-#define BZ_CONFIG_ERROR      (-9)
-
-typedef 
-   struct {
-      char *next_in;
-      unsigned int avail_in;
-      unsigned int total_in_lo32;
-      unsigned int total_in_hi32;
-
-      char *next_out;
-      unsigned int avail_out;
-      unsigned int total_out_lo32;
-      unsigned int total_out_hi32;
-
-      void *state;
-
-      void *(*bzalloc)(void *,int,int);
-      void (*bzfree)(void *,void *);
-      void *opaque;
-   } 
-   bz_stream;
-
-
-#ifndef BZ_IMPORT
-#define BZ_EXPORT
-#endif
-
-#ifdef _WIN32
-#   include <stdio.h>
-#   include <windows.h>
-#   ifdef small
-      /* windows.h define small to char */
-#      undef small
-#   endif
-#   ifdef BZ_EXPORT
-#   define BZ_API(func) WINAPI func
-#   define BZ_EXTERN extern
-#   else
-   /* import windows dll dynamically */
-#   define BZ_API(func) (WINAPI * func)
-#   define BZ_EXTERN
-#   endif
-#else
-#   define BZ_API(func) func
-#   define BZ_EXTERN extern
-#endif
-
-
-/*-- Core (low-level) library functions --*/
-
-BZ_EXTERN int BZ_API(BZ2_bzCompressInit) ( 
-      bz_stream* strm, 
-      int        blockSize100k, 
-      int        verbosity, 
-      int        workFactor 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzCompress) ( 
-      bz_stream* strm, 
-      int action 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzCompressEnd) ( 
-      bz_stream* strm 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzDecompressInit) ( 
-      bz_stream *strm, 
-      int       verbosity, 
-      int       small
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzDecompress) ( 
-      bz_stream* strm 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzDecompressEnd) ( 
-      bz_stream *strm 
-   );
-
-
-
-/*-- High(er) level library functions --*/
-
-#ifndef BZ_NO_STDIO
-#define BZ_MAX_UNUSED 5000
-
-typedef void BZFILE;
-
-BZ_EXTERN BZFILE* BZ_API(BZ2_bzReadOpen) ( 
-      int*  bzerror,   
-      FILE* f, 
-      int   verbosity, 
-      int   small,
-      void* unused,    
-      int   nUnused 
-   );
-
-BZ_EXTERN void BZ_API(BZ2_bzReadClose) ( 
-      int*    bzerror, 
-      BZFILE* b 
-   );
-
-BZ_EXTERN void BZ_API(BZ2_bzReadGetUnused) ( 
-      int*    bzerror, 
-      BZFILE* b, 
-      void**  unused,  
-      int*    nUnused 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzRead) ( 
-      int*    bzerror, 
-      BZFILE* b, 
-      void*   buf, 
-      int     len 
-   );
-
-BZ_EXTERN BZFILE* BZ_API(BZ2_bzWriteOpen) ( 
-      int*  bzerror,      
-      FILE* f, 
-      int   blockSize100k, 
-      int   verbosity, 
-      int   workFactor 
-   );
-
-BZ_EXTERN void BZ_API(BZ2_bzWrite) ( 
-      int*    bzerror, 
-      BZFILE* b, 
-      void*   buf, 
-      int     len 
-   );
-
-BZ_EXTERN void BZ_API(BZ2_bzWriteClose) ( 
-      int*          bzerror, 
-      BZFILE*       b, 
-      int           abandon, 
-      unsigned int* nbytes_in, 
-      unsigned int* nbytes_out 
-   );
-
-BZ_EXTERN void BZ_API(BZ2_bzWriteClose64) ( 
-      int*          bzerror, 
-      BZFILE*       b, 
-      int           abandon, 
-      unsigned int* nbytes_in_lo32, 
-      unsigned int* nbytes_in_hi32, 
-      unsigned int* nbytes_out_lo32, 
-      unsigned int* nbytes_out_hi32
-   );
-#endif
-
-
-/*-- Utility functions --*/
-
-BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffCompress) ( 
-      char*         dest, 
-      unsigned int* destLen,
-      char*         source, 
-      unsigned int  sourceLen,
-      int           blockSize100k, 
-      int           verbosity, 
-      int           workFactor 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffDecompress) ( 
-      char*         dest, 
-      unsigned int* destLen,
-      char*         source, 
-      unsigned int  sourceLen,
-      int           small, 
-      int           verbosity 
-   );
-
-
-/*--
-   Code contributed by Yoshioka Tsuneo
-   (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
-   to support better zlib compatibility.
-   This code is not _officially_ part of libbzip2 (yet);
-   I haven't tested it, documented it, or considered the
-   threading-safeness of it.
-   If this code breaks, please contact both Yoshioka and me.
---*/
-
-BZ_EXTERN const char * BZ_API(BZ2_bzlibVersion) (
-      void
-   );
-
-#ifndef BZ_NO_STDIO
-BZ_EXTERN BZFILE * BZ_API(BZ2_bzopen) (
-      const char *path,
-      const char *mode
-   );
-
-BZ_EXTERN BZFILE * BZ_API(BZ2_bzdopen) (
-      int        fd,
-      const char *mode
-   );
-         
-BZ_EXTERN int BZ_API(BZ2_bzread) (
-      BZFILE* b, 
-      void* buf, 
-      int len 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzwrite) (
-      BZFILE* b, 
-      void*   buf, 
-      int     len 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzflush) (
-      BZFILE* b
-   );
-
-BZ_EXTERN void BZ_API(BZ2_bzclose) (
-      BZFILE* b
-   );
-
-BZ_EXTERN const char * BZ_API(BZ2_bzerror) (
-      BZFILE *b, 
-      int    *errnum
-   );
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/*-------------------------------------------------------------*/
-/*--- end                                           bzlib.h ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/bzlib_private.h b/mdk-stage1/bzlib/bzlib_private.h
deleted file mode 100644
index fb51c7a1d..000000000
--- a/mdk-stage1/bzlib/bzlib_private.h
+++ /dev/null
@@ -1,530 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Private header file for the library.                  ---*/
-/*---                                       bzlib_private.h ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-
-#ifndef _BZLIB_PRIVATE_H
-#define _BZLIB_PRIVATE_H
-
-#include <stdlib.h>
-
-#ifndef BZ_NO_STDIO
-#include <stdio.h>
-#include <ctype.h>
-#include <string.h>
-#endif
-
-#include "bzlib.h"
-
-
-
-/*-- General stuff. --*/
-
-#define BZ_VERSION  "1.0.1, 23-June-2000"
-
-typedef char            Char;
-typedef unsigned char   Bool;
-typedef unsigned char   UChar;
-typedef int             Int32;
-typedef unsigned int    UInt32;
-typedef short           Int16;
-typedef unsigned short  UInt16;
-
-#define True  ((Bool)1)
-#define False ((Bool)0)
-
-#ifndef __GNUC__
-#define __inline__  /* */
-#endif 
-
-#ifndef BZ_NO_STDIO
-extern void BZ2_bz__AssertH__fail ( int errcode );
-#define AssertH(cond,errcode) \
-   { if (!(cond)) BZ2_bz__AssertH__fail ( errcode ); }
-#if BZ_DEBUG
-#define AssertD(cond,msg) \
-   { if (!(cond)) {       \
-      fprintf ( stderr,   \
-        "\n\nlibbzip2(debug build): internal error\n\t%s\n", msg );\
-      exit(1); \
-   }}
-#else
-#define AssertD(cond,msg) /* */
-#endif
-#define VPrintf0(zf) \
-   fprintf(stderr,zf)
-#define VPrintf1(zf,za1) \
-   fprintf(stderr,zf,za1)
-#define VPrintf2(zf,za1,za2) \
-   fprintf(stderr,zf,za1,za2)
-#define VPrintf3(zf,za1,za2,za3) \
-   fprintf(stderr,zf,za1,za2,za3)
-#define VPrintf4(zf,za1,za2,za3,za4) \
-   fprintf(stderr,zf,za1,za2,za3,za4)
-#define VPrintf5(zf,za1,za2,za3,za4,za5) \
-   fprintf(stderr,zf,za1,za2,za3,za4,za5)
-#else
-extern void bz_internal_error ( int errcode );
-#define AssertH(cond,errcode) \
-   { if (!(cond)) bz_internal_error ( errcode ); }
-#define AssertD(cond,msg) /* */
-#define VPrintf0(zf) /* */
-#define VPrintf1(zf,za1) /* */
-#define VPrintf2(zf,za1,za2) /* */
-#define VPrintf3(zf,za1,za2,za3) /* */
-#define VPrintf4(zf,za1,za2,za3,za4) /* */
-#define VPrintf5(zf,za1,za2,za3,za4,za5) /* */
-#endif
-
-
-#define BZALLOC(nnn) (strm->bzalloc)(strm->opaque,(nnn),1)
-#define BZFREE(ppp)  (strm->bzfree)(strm->opaque,(ppp))
-
-
-/*-- Constants for the back end. --*/
-
-#define BZ_MAX_ALPHA_SIZE 258
-#define BZ_MAX_CODE_LEN    23
-
-#define BZ_RUNA 0
-#define BZ_RUNB 1
-
-#define BZ_N_GROUPS 6
-#define BZ_G_SIZE   50
-#define BZ_N_ITERS  4
-
-#define BZ_MAX_SELECTORS (2 + (900000 / BZ_G_SIZE))
-
-
-
-/*-- Stuff for randomising repetitive blocks. --*/
-
-extern Int32 BZ2_rNums[512];
-
-#define BZ_RAND_DECLS                          \
-   Int32 rNToGo;                               \
-   Int32 rTPos                                 \
-
-#define BZ_RAND_INIT_MASK                      \
-   s->rNToGo = 0;                              \
-   s->rTPos  = 0                               \
-
-#define BZ_RAND_MASK ((s->rNToGo == 1) ? 1 : 0)
-
-#define BZ_RAND_UPD_MASK                       \
-   if (s->rNToGo == 0) {                       \
-      s->rNToGo = BZ2_rNums[s->rTPos];         \
-      s->rTPos++;                              \
-      if (s->rTPos == 512) s->rTPos = 0;       \
-   }                                           \
-   s->rNToGo--;
-
-
-
-/*-- Stuff for doing CRCs. --*/
-
-extern UInt32 BZ2_crc32Table[256];
-
-#define BZ_INITIALISE_CRC(crcVar)              \
-{                                              \
-   crcVar = 0xffffffffL;                       \
-}
-
-#define BZ_FINALISE_CRC(crcVar)                \
-{                                              \
-   crcVar = ~(crcVar);                         \
-}
-
-#define BZ_UPDATE_CRC(crcVar,cha)              \
-{                                              \
-   crcVar = (crcVar << 8) ^                    \
-            BZ2_crc32Table[(crcVar >> 24) ^    \
-                           ((UChar)cha)];      \
-}
-
-
-
-/*-- States and modes for compression. --*/
-
-#define BZ_M_IDLE      1
-#define BZ_M_RUNNING   2
-#define BZ_M_FLUSHING  3
-#define BZ_M_FINISHING 4
-
-#define BZ_S_OUTPUT    1
-#define BZ_S_INPUT     2
-
-#define BZ_N_RADIX 2
-#define BZ_N_QSORT 12
-#define BZ_N_SHELL 18
-#define BZ_N_OVERSHOOT (BZ_N_RADIX + BZ_N_QSORT + BZ_N_SHELL + 2)
-
-
-
-
-/*-- Structure holding all the compression-side stuff. --*/
-
-typedef
-   struct {
-      /* pointer back to the struct bz_stream */
-      bz_stream* strm;
-
-      /* mode this stream is in, and whether inputting */
-      /* or outputting data */
-      Int32    mode;
-      Int32    state;
-
-      /* remembers avail_in when flush/finish requested */
-      UInt32   avail_in_expect;
-
-      /* for doing the block sorting */
-      UInt32*  arr1;
-      UInt32*  arr2;
-      UInt32*  ftab;
-      Int32    origPtr;
-
-      /* aliases for arr1 and arr2 */
-      UInt32*  ptr;
-      UChar*   block;
-      UInt16*  mtfv;
-      UChar*   zbits;
-
-      /* for deciding when to use the fallback sorting algorithm */
-      Int32    workFactor;
-
-      /* run-length-encoding of the input */
-      UInt32   state_in_ch;
-      Int32    state_in_len;
-      BZ_RAND_DECLS;
-
-      /* input and output limits and current posns */
-      Int32    nblock;
-      Int32    nblockMAX;
-      Int32    numZ;
-      Int32    state_out_pos;
-
-      /* map of bytes used in block */
-      Int32    nInUse;
-      Bool     inUse[256];
-      UChar    unseqToSeq[256];
-
-      /* the buffer for bit stream creation */
-      UInt32   bsBuff;
-      Int32    bsLive;
-
-      /* block and combined CRCs */
-      UInt32   blockCRC;
-      UInt32   combinedCRC;
-
-      /* misc administratium */
-      Int32    verbosity;
-      Int32    blockNo;
-      Int32    blockSize100k;
-
-      /* stuff for coding the MTF values */
-      Int32    nMTF;
-      Int32    mtfFreq    [BZ_MAX_ALPHA_SIZE];
-      UChar    selector   [BZ_MAX_SELECTORS];
-      UChar    selectorMtf[BZ_MAX_SELECTORS];
-
-      UChar    len     [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-      Int32    code    [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-      Int32    rfreq   [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-      /* second dimension: only 3 needed; 4 makes index calculations faster */
-      UInt32   len_pack[BZ_MAX_ALPHA_SIZE][4];
-
-   }
-   EState;
-
-
-
-/*-- externs for compression. --*/
-
-extern void 
-BZ2_blockSort ( EState* );
-
-extern void 
-BZ2_compressBlock ( EState*, Bool );
-
-extern void 
-BZ2_bsInitWrite ( EState* );
-
-extern void 
-BZ2_hbAssignCodes ( Int32*, UChar*, Int32, Int32, Int32 );
-
-extern void 
-BZ2_hbMakeCodeLengths ( UChar*, Int32*, Int32, Int32 );
-
-
-
-/*-- states for decompression. --*/
-
-#define BZ_X_IDLE        1
-#define BZ_X_OUTPUT      2
-
-#define BZ_X_MAGIC_1     10
-#define BZ_X_MAGIC_2     11
-#define BZ_X_MAGIC_3     12
-#define BZ_X_MAGIC_4     13
-#define BZ_X_BLKHDR_1    14
-#define BZ_X_BLKHDR_2    15
-#define BZ_X_BLKHDR_3    16
-#define BZ_X_BLKHDR_4    17
-#define BZ_X_BLKHDR_5    18
-#define BZ_X_BLKHDR_6    19
-#define BZ_X_BCRC_1      20
-#define BZ_X_BCRC_2      21
-#define BZ_X_BCRC_3      22
-#define BZ_X_BCRC_4      23
-#define BZ_X_RANDBIT     24
-#define BZ_X_ORIGPTR_1   25
-#define BZ_X_ORIGPTR_2   26
-#define BZ_X_ORIGPTR_3   27
-#define BZ_X_MAPPING_1   28
-#define BZ_X_MAPPING_2   29
-#define BZ_X_SELECTOR_1  30
-#define BZ_X_SELECTOR_2  31
-#define BZ_X_SELECTOR_3  32
-#define BZ_X_CODING_1    33
-#define BZ_X_CODING_2    34
-#define BZ_X_CODING_3    35
-#define BZ_X_MTF_1       36
-#define BZ_X_MTF_2       37
-#define BZ_X_MTF_3       38
-#define BZ_X_MTF_4       39
-#define BZ_X_MTF_5       40
-#define BZ_X_MTF_6       41
-#define BZ_X_ENDHDR_2    42
-#define BZ_X_ENDHDR_3    43
-#define BZ_X_ENDHDR_4    44
-#define BZ_X_ENDHDR_5    45
-#define BZ_X_ENDHDR_6    46
-#define BZ_X_CCRC_1      47
-#define BZ_X_CCRC_2      48
-#define BZ_X_CCRC_3      49
-#define BZ_X_CCRC_4      50
-
-
-
-/*-- Constants for the fast MTF decoder. --*/
-
-#define MTFA_SIZE 4096
-#define MTFL_SIZE 16
-
-
-
-/*-- Structure holding all the decompression-side stuff. --*/
-
-typedef
-   struct {
-      /* pointer back to the struct bz_stream */
-      bz_stream* strm;
-
-      /* state indicator for this stream */
-      Int32    state;
-
-      /* for doing the final run-length decoding */
-      UChar    state_out_ch;
-      Int32    state_out_len;
-      Bool     blockRandomised;
-      BZ_RAND_DECLS;
-
-      /* the buffer for bit stream reading */
-      UInt32   bsBuff;
-      Int32    bsLive;
-
-      /* misc administratium */
-      Int32    blockSize100k;
-      Bool     smallDecompress;
-      Int32    currBlockNo;
-      Int32    verbosity;
-
-      /* for undoing the Burrows-Wheeler transform */
-      Int32    origPtr;
-      UInt32   tPos;
-      Int32    k0;
-      Int32    unzftab[256];
-      Int32    nblock_used;
-      Int32    cftab[257];
-      Int32    cftabCopy[257];
-
-      /* for undoing the Burrows-Wheeler transform (FAST) */
-      UInt32   *tt;
-
-      /* for undoing the Burrows-Wheeler transform (SMALL) */
-      UInt16   *ll16;
-      UChar    *ll4;
-
-      /* stored and calculated CRCs */
-      UInt32   storedBlockCRC;
-      UInt32   storedCombinedCRC;
-      UInt32   calculatedBlockCRC;
-      UInt32   calculatedCombinedCRC;
-
-      /* map of bytes used in block */
-      Int32    nInUse;
-      Bool     inUse[256];
-      Bool     inUse16[16];
-      UChar    seqToUnseq[256];
-
-      /* for decoding the MTF values */
-      UChar    mtfa   [MTFA_SIZE];
-      Int32    mtfbase[256 / MTFL_SIZE];
-      UChar    selector   [BZ_MAX_SELECTORS];
-      UChar    selectorMtf[BZ_MAX_SELECTORS];
-      UChar    len  [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-
-      Int32    limit  [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-      Int32    base   [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-      Int32    perm   [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-      Int32    minLens[BZ_N_GROUPS];
-
-      /* save area for scalars in the main decompress code */
-      Int32    save_i;
-      Int32    save_j;
-      Int32    save_t;
-      Int32    save_alphaSize;
-      Int32    save_nGroups;
-      Int32    save_nSelectors;
-      Int32    save_EOB;
-      Int32    save_groupNo;
-      Int32    save_groupPos;
-      Int32    save_nextSym;
-      Int32    save_nblockMAX;
-      Int32    save_nblock;
-      Int32    save_es;
-      Int32    save_N;
-      Int32    save_curr;
-      Int32    save_zt;
-      Int32    save_zn; 
-      Int32    save_zvec;
-      Int32    save_zj;
-      Int32    save_gSel;
-      Int32    save_gMinlen;
-      Int32*   save_gLimit;
-      Int32*   save_gBase;
-      Int32*   save_gPerm;
-
-   }
-   DState;
-
-
-
-/*-- Macros for decompression. --*/
-
-#define BZ_GET_FAST(cccc)                     \
-    s->tPos = s->tt[s->tPos];                 \
-    cccc = (UChar)(s->tPos & 0xff);           \
-    s->tPos >>= 8;
-
-#define BZ_GET_FAST_C(cccc)                   \
-    c_tPos = c_tt[c_tPos];                    \
-    cccc = (UChar)(c_tPos & 0xff);            \
-    c_tPos >>= 8;
-
-#define SET_LL4(i,n)                                          \
-   { if (((i) & 0x1) == 0)                                    \
-        s->ll4[(i) >> 1] = (s->ll4[(i) >> 1] & 0xf0) | (n); else    \
-        s->ll4[(i) >> 1] = (s->ll4[(i) >> 1] & 0x0f) | ((n) << 4);  \
-   }
-
-#define GET_LL4(i)                             \
-   ((((UInt32)(s->ll4[(i) >> 1])) >> (((i) << 2) & 0x4)) & 0xF)
-
-#define SET_LL(i,n)                          \
-   { s->ll16[i] = (UInt16)(n & 0x0000ffff);  \
-     SET_LL4(i, n >> 16);                    \
-   }
-
-#define GET_LL(i) \
-   (((UInt32)s->ll16[i]) | (GET_LL4(i) << 16))
-
-#define BZ_GET_SMALL(cccc)                            \
-      cccc = BZ2_indexIntoF ( s->tPos, s->cftab );    \
-      s->tPos = GET_LL(s->tPos);
-
-
-/*-- externs for decompression. --*/
-
-extern Int32 
-BZ2_indexIntoF ( Int32, Int32* );
-
-extern Int32 
-BZ2_decompress ( DState* );
-
-extern void 
-BZ2_hbCreateDecodeTables ( Int32*, Int32*, Int32*, UChar*,
-                           Int32,  Int32, Int32 );
-
-
-#endif
-
-
-/*-- BZ_NO_STDIO seems to make NULL disappear on some platforms. --*/
-
-#ifdef BZ_NO_STDIO
-#ifndef NULL
-#define NULL 0
-#endif
-#endif
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                   bzlib_private.h ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/compress.c b/mdk-stage1/bzlib/compress.c
deleted file mode 100644
index 58d5abe7c..000000000
--- a/mdk-stage1/bzlib/compress.c
+++ /dev/null
@@ -1,720 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Compression machinery (not incl block sorting)        ---*/
-/*---                                            compress.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-/*--
-   CHANGES
-   ~~~~~~~
-   0.9.0 -- original version.
-
-   0.9.0a/b -- no changes in this file.
-
-   0.9.0c
-      * changed setting of nGroups in sendMTFValues() so as to 
-        do a bit better on small files
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-
-#include "bzlib_private.h"
-
-
-/*---------------------------------------------------*/
-/*--- Bit stream I/O                              ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-void BZ2_bsInitWrite ( EState* s )
-{
-   s->bsLive = 0;
-   s->bsBuff = 0;
-}
-
-
-/*---------------------------------------------------*/
-static
-void bsFinishWrite ( EState* s )
-{
-   while (s->bsLive > 0) {
-      s->zbits[s->numZ] = (UChar)(s->bsBuff >> 24);
-      s->numZ++;
-      s->bsBuff <<= 8;
-      s->bsLive -= 8;
-   }
-}
-
-
-/*---------------------------------------------------*/
-#define bsNEEDW(nz)                           \
-{                                             \
-   while (s->bsLive >= 8) {                   \
-      s->zbits[s->numZ]                       \
-         = (UChar)(s->bsBuff >> 24);          \
-      s->numZ++;                              \
-      s->bsBuff <<= 8;                        \
-      s->bsLive -= 8;                         \
-   }                                          \
-}
-
-
-/*---------------------------------------------------*/
-static
-__inline__
-void bsW ( EState* s, Int32 n, UInt32 v )
-{
-   bsNEEDW ( n );
-   s->bsBuff |= (v << (32 - s->bsLive - n));
-   s->bsLive += n;
-}
-
-
-/*---------------------------------------------------*/
-static
-void bsPutUInt32 ( EState* s, UInt32 u )
-{
-   bsW ( s, 8, (u >> 24) & 0xffL );
-   bsW ( s, 8, (u >> 16) & 0xffL );
-   bsW ( s, 8, (u >>  8) & 0xffL );
-   bsW ( s, 8,  u        & 0xffL );
-}
-
-
-/*---------------------------------------------------*/
-static
-void bsPutUChar ( EState* s, UChar c )
-{
-   bsW( s, 8, (UInt32)c );
-}
-
-
-/*---------------------------------------------------*/
-/*--- The back end proper                         ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-static
-void makeMaps_e ( EState* s )
-{
-   Int32 i;
-   s->nInUse = 0;
-   for (i = 0; i < 256; i++)
-      if (s->inUse[i]) {
-         s->unseqToSeq[i] = s->nInUse;
-         s->nInUse++;
-      }
-}
-
-
-/*---------------------------------------------------*/
-static
-void generateMTFValues ( EState* s )
-{
-   UChar   yy[256];
-   Int32   i, j;
-   Int32   zPend;
-   Int32   wr;
-   Int32   EOB;
-
-   /* 
-      After sorting (eg, here),
-         s->arr1 [ 0 .. s->nblock-1 ] holds sorted order,
-         and
-         ((UChar*)s->arr2) [ 0 .. s->nblock-1 ] 
-         holds the original block data.
-
-      The first thing to do is generate the MTF values,
-      and put them in
-         ((UInt16*)s->arr1) [ 0 .. s->nblock-1 ].
-      Because there are strictly fewer or equal MTF values
-      than block values, ptr values in this area are overwritten
-      with MTF values only when they are no longer needed.
-
-      The final compressed bitstream is generated into the
-      area starting at
-         (UChar*) (&((UChar*)s->arr2)[s->nblock])
-
-      These storage aliases are set up in bzCompressInit(),
-      except for the last one, which is arranged in 
-      compressBlock().
-   */
-   UInt32* ptr   = s->ptr;
-   UChar* block  = s->block;
-   UInt16* mtfv  = s->mtfv;
-
-   makeMaps_e ( s );
-   EOB = s->nInUse+1;
-
-   for (i = 0; i <= EOB; i++) s->mtfFreq[i] = 0;
-
-   wr = 0;
-   zPend = 0;
-   for (i = 0; i < s->nInUse; i++) yy[i] = (UChar) i;
-
-   for (i = 0; i < s->nblock; i++) {
-      UChar ll_i;
-      AssertD ( wr <= i, "generateMTFValues(1)" );
-      j = ptr[i]-1; if (j < 0) j += s->nblock;
-      ll_i = s->unseqToSeq[block[j]];
-      AssertD ( ll_i < s->nInUse, "generateMTFValues(2a)" );
-
-      if (yy[0] == ll_i) { 
-         zPend++;
-      } else {
-
-         if (zPend > 0) {
-            zPend--;
-            while (True) {
-               if (zPend & 1) {
-                  mtfv[wr] = BZ_RUNB; wr++; 
-                  s->mtfFreq[BZ_RUNB]++; 
-               } else {
-                  mtfv[wr] = BZ_RUNA; wr++; 
-                  s->mtfFreq[BZ_RUNA]++; 
-               }
-               if (zPend < 2) break;
-               zPend = (zPend - 2) / 2;
-            };
-            zPend = 0;
-         }
-         {
-            register UChar  rtmp;
-            register UChar* ryy_j;
-            register UChar  rll_i;
-            rtmp  = yy[1];
-            yy[1] = yy[0];
-            ryy_j = &(yy[1]);
-            rll_i = ll_i;
-            while ( rll_i != rtmp ) {
-               register UChar rtmp2;
-               ryy_j++;
-               rtmp2  = rtmp;
-               rtmp   = *ryy_j;
-               *ryy_j = rtmp2;
-            };
-            yy[0] = rtmp;
-            j = ryy_j - &(yy[0]);
-            mtfv[wr] = j+1; wr++; s->mtfFreq[j+1]++;
-         }
-
-      }
-   }
-
-   if (zPend > 0) {
-      zPend--;
-      while (True) {
-         if (zPend & 1) {
-            mtfv[wr] = BZ_RUNB; wr++; 
-            s->mtfFreq[BZ_RUNB]++; 
-         } else {
-            mtfv[wr] = BZ_RUNA; wr++; 
-            s->mtfFreq[BZ_RUNA]++; 
-         }
-         if (zPend < 2) break;
-         zPend = (zPend - 2) / 2;
-      };
-      zPend = 0;
-   }
-
-   mtfv[wr] = EOB; wr++; s->mtfFreq[EOB]++;
-
-   s->nMTF = wr;
-}
-
-
-/*---------------------------------------------------*/
-#define BZ_LESSER_ICOST  0
-#define BZ_GREATER_ICOST 15
-
-static
-void sendMTFValues ( EState* s )
-{
-   Int32 v, t, i, j, gs, ge, totc, bt, bc, iter;
-   Int32 nSelectors, alphaSize, minLen, maxLen, selCtr;
-   Int32 nGroups, nBytes;
-
-   /*--
-   UChar  len [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-   is a global since the decoder also needs it.
-
-   Int32  code[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-   Int32  rfreq[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-   are also globals only used in this proc.
-   Made global to keep stack frame size small.
-   --*/
-
-
-   UInt16 cost[BZ_N_GROUPS];
-   Int32  fave[BZ_N_GROUPS];
-
-   UInt16* mtfv = s->mtfv;
-
-   if (s->verbosity >= 3)
-      VPrintf3( "      %d in block, %d after MTF & 1-2 coding, "
-                "%d+2 syms in use\n", 
-                s->nblock, s->nMTF, s->nInUse );
-
-   alphaSize = s->nInUse+2;
-   for (t = 0; t < BZ_N_GROUPS; t++)
-      for (v = 0; v < alphaSize; v++)
-         s->len[t][v] = BZ_GREATER_ICOST;
-
-   /*--- Decide how many coding tables to use ---*/
-   AssertH ( s->nMTF > 0, 3001 );
-   if (s->nMTF < 200)  nGroups = 2; else
-   if (s->nMTF < 600)  nGroups = 3; else
-   if (s->nMTF < 1200) nGroups = 4; else
-   if (s->nMTF < 2400) nGroups = 5; else
-                       nGroups = 6;
-
-   /*--- Generate an initial set of coding tables ---*/
-   { 
-      Int32 nPart, remF, tFreq, aFreq;
-
-      nPart = nGroups;
-      remF  = s->nMTF;
-      gs = 0;
-      while (nPart > 0) {
-         tFreq = remF / nPart;
-         ge = gs-1;
-         aFreq = 0;
-         while (aFreq < tFreq && ge < alphaSize-1) {
-            ge++;
-            aFreq += s->mtfFreq[ge];
-         }
-
-         if (ge > gs 
-             && nPart != nGroups && nPart != 1 
-             && ((nGroups-nPart) % 2 == 1)) {
-            aFreq -= s->mtfFreq[ge];
-            ge--;
-         }
-
-         if (s->verbosity >= 3)
-            VPrintf5( "      initial group %d, [%d .. %d], "
-                      "has %d syms (%4.1f%%)\n",
-                      nPart, gs, ge, aFreq, 
-                      (100.0 * (float)aFreq) / (float)(s->nMTF) );
- 
-         for (v = 0; v < alphaSize; v++)
-            if (v >= gs && v <= ge) 
-               s->len[nPart-1][v] = BZ_LESSER_ICOST; else
-               s->len[nPart-1][v] = BZ_GREATER_ICOST;
- 
-         nPart--;
-         gs = ge+1;
-         remF -= aFreq;
-      }
-   }
-
-   /*--- 
-      Iterate up to BZ_N_ITERS times to improve the tables.
-   ---*/
-   for (iter = 0; iter < BZ_N_ITERS; iter++) {
-
-      for (t = 0; t < nGroups; t++) fave[t] = 0;
-
-      for (t = 0; t < nGroups; t++)
-         for (v = 0; v < alphaSize; v++)
-            s->rfreq[t][v] = 0;
-
-      /*---
-        Set up an auxiliary length table which is used to fast-track
-	the common case (nGroups == 6). 
-      ---*/
-      if (nGroups == 6) {
-         for (v = 0; v < alphaSize; v++) {
-            s->len_pack[v][0] = (s->len[1][v] << 16) | s->len[0][v];
-            s->len_pack[v][1] = (s->len[3][v] << 16) | s->len[2][v];
-            s->len_pack[v][2] = (s->len[5][v] << 16) | s->len[4][v];
-	 }
-      }
-
-      nSelectors = 0;
-      totc = 0;
-      gs = 0;
-      while (True) {
-
-         /*--- Set group start & end marks. --*/
-         if (gs >= s->nMTF) break;
-         ge = gs + BZ_G_SIZE - 1; 
-         if (ge >= s->nMTF) ge = s->nMTF-1;
-
-         /*-- 
-            Calculate the cost of this group as coded
-            by each of the coding tables.
-         --*/
-         for (t = 0; t < nGroups; t++) cost[t] = 0;
-
-         if (nGroups == 6 && 50 == ge-gs+1) {
-            /*--- fast track the common case ---*/
-            register UInt32 cost01, cost23, cost45;
-            register UInt16 icv;
-            cost01 = cost23 = cost45 = 0;
-
-#           define BZ_ITER(nn)                \
-               icv = mtfv[gs+(nn)];           \
-               cost01 += s->len_pack[icv][0]; \
-               cost23 += s->len_pack[icv][1]; \
-               cost45 += s->len_pack[icv][2]; \
-
-            BZ_ITER(0);  BZ_ITER(1);  BZ_ITER(2);  BZ_ITER(3);  BZ_ITER(4);
-            BZ_ITER(5);  BZ_ITER(6);  BZ_ITER(7);  BZ_ITER(8);  BZ_ITER(9);
-            BZ_ITER(10); BZ_ITER(11); BZ_ITER(12); BZ_ITER(13); BZ_ITER(14);
-            BZ_ITER(15); BZ_ITER(16); BZ_ITER(17); BZ_ITER(18); BZ_ITER(19);
-            BZ_ITER(20); BZ_ITER(21); BZ_ITER(22); BZ_ITER(23); BZ_ITER(24);
-            BZ_ITER(25); BZ_ITER(26); BZ_ITER(27); BZ_ITER(28); BZ_ITER(29);
-            BZ_ITER(30); BZ_ITER(31); BZ_ITER(32); BZ_ITER(33); BZ_ITER(34);
-            BZ_ITER(35); BZ_ITER(36); BZ_ITER(37); BZ_ITER(38); BZ_ITER(39);
-            BZ_ITER(40); BZ_ITER(41); BZ_ITER(42); BZ_ITER(43); BZ_ITER(44);
-            BZ_ITER(45); BZ_ITER(46); BZ_ITER(47); BZ_ITER(48); BZ_ITER(49);
-
-#           undef BZ_ITER
-
-            cost[0] = cost01 & 0xffff; cost[1] = cost01 >> 16;
-            cost[2] = cost23 & 0xffff; cost[3] = cost23 >> 16;
-            cost[4] = cost45 & 0xffff; cost[5] = cost45 >> 16;
-
-         } else {
-	    /*--- slow version which correctly handles all situations ---*/
-            for (i = gs; i <= ge; i++) { 
-               UInt16 icv = mtfv[i];
-               for (t = 0; t < nGroups; t++) cost[t] += s->len[t][icv];
-            }
-         }
- 
-         /*-- 
-            Find the coding table which is best for this group,
-            and record its identity in the selector table.
-         --*/
-         bc = 999999999; bt = -1;
-         for (t = 0; t < nGroups; t++)
-            if (cost[t] < bc) { bc = cost[t]; bt = t; };
-         totc += bc;
-         fave[bt]++;
-         s->selector[nSelectors] = bt;
-         nSelectors++;
-
-         /*-- 
-            Increment the symbol frequencies for the selected table.
-          --*/
-         if (nGroups == 6 && 50 == ge-gs+1) {
-            /*--- fast track the common case ---*/
-
-#           define BZ_ITUR(nn) s->rfreq[bt][ mtfv[gs+(nn)] ]++
-
-            BZ_ITUR(0);  BZ_ITUR(1);  BZ_ITUR(2);  BZ_ITUR(3);  BZ_ITUR(4);
-            BZ_ITUR(5);  BZ_ITUR(6);  BZ_ITUR(7);  BZ_ITUR(8);  BZ_ITUR(9);
-            BZ_ITUR(10); BZ_ITUR(11); BZ_ITUR(12); BZ_ITUR(13); BZ_ITUR(14);
-            BZ_ITUR(15); BZ_ITUR(16); BZ_ITUR(17); BZ_ITUR(18); BZ_ITUR(19);
-            BZ_ITUR(20); BZ_ITUR(21); BZ_ITUR(22); BZ_ITUR(23); BZ_ITUR(24);
-            BZ_ITUR(25); BZ_ITUR(26); BZ_ITUR(27); BZ_ITUR(28); BZ_ITUR(29);
-            BZ_ITUR(30); BZ_ITUR(31); BZ_ITUR(32); BZ_ITUR(33); BZ_ITUR(34);
-            BZ_ITUR(35); BZ_ITUR(36); BZ_ITUR(37); BZ_ITUR(38); BZ_ITUR(39);
-            BZ_ITUR(40); BZ_ITUR(41); BZ_ITUR(42); BZ_ITUR(43); BZ_ITUR(44);
-            BZ_ITUR(45); BZ_ITUR(46); BZ_ITUR(47); BZ_ITUR(48); BZ_ITUR(49);
-
-#           undef BZ_ITUR
-
-         } else {
-	    /*--- slow version which correctly handles all situations ---*/
-            for (i = gs; i <= ge; i++)
-               s->rfreq[bt][ mtfv[i] ]++;
-         }
-
-         gs = ge+1;
-      }
-      if (s->verbosity >= 3) {
-         VPrintf2 ( "      pass %d: size is %d, grp uses are ", 
-                   iter+1, totc/8 );
-         for (t = 0; t < nGroups; t++)
-            VPrintf1 ( "%d ", fave[t] );
-         VPrintf0 ( "\n" );
-      }
-
-      /*--
-        Recompute the tables based on the accumulated frequencies.
-      --*/
-      for (t = 0; t < nGroups; t++)
-         BZ2_hbMakeCodeLengths ( &(s->len[t][0]), &(s->rfreq[t][0]), 
-                                 alphaSize, 20 );
-   }
-
-
-   AssertH( nGroups < 8, 3002 );
-   AssertH( nSelectors < 32768 &&
-            nSelectors <= (2 + (900000 / BZ_G_SIZE)),
-            3003 );
-
-
-   /*--- Compute MTF values for the selectors. ---*/
-   {
-      UChar pos[BZ_N_GROUPS], ll_i, tmp2, tmp;
-      for (i = 0; i < nGroups; i++) pos[i] = i;
-      for (i = 0; i < nSelectors; i++) {
-         ll_i = s->selector[i];
-         j = 0;
-         tmp = pos[j];
-         while ( ll_i != tmp ) {
-            j++;
-            tmp2 = tmp;
-            tmp = pos[j];
-            pos[j] = tmp2;
-         };
-         pos[0] = tmp;
-         s->selectorMtf[i] = j;
-      }
-   };
-
-   /*--- Assign actual codes for the tables. --*/
-   for (t = 0; t < nGroups; t++) {
-      minLen = 32;
-      maxLen = 0;
-      for (i = 0; i < alphaSize; i++) {
-         if (s->len[t][i] > maxLen) maxLen = s->len[t][i];
-         if (s->len[t][i] < minLen) minLen = s->len[t][i];
-      }
-      AssertH ( !(maxLen > 20), 3004 );
-      AssertH ( !(minLen < 1),  3005 );
-      BZ2_hbAssignCodes ( &(s->code[t][0]), &(s->len[t][0]), 
-                          minLen, maxLen, alphaSize );
-   }
-
-   /*--- Transmit the mapping table. ---*/
-   { 
-      Bool inUse16[16];
-      for (i = 0; i < 16; i++) {
-          inUse16[i] = False;
-          for (j = 0; j < 16; j++)
-             if (s->inUse[i * 16 + j]) inUse16[i] = True;
-      }
-     
-      nBytes = s->numZ;
-      for (i = 0; i < 16; i++)
-         if (inUse16[i]) bsW(s,1,1); else bsW(s,1,0);
-
-      for (i = 0; i < 16; i++)
-         if (inUse16[i])
-            for (j = 0; j < 16; j++) {
-               if (s->inUse[i * 16 + j]) bsW(s,1,1); else bsW(s,1,0);
-            }
-
-      if (s->verbosity >= 3) 
-         VPrintf1( "      bytes: mapping %d, ", s->numZ-nBytes );
-   }
-
-   /*--- Now the selectors. ---*/
-   nBytes = s->numZ;
-   bsW ( s, 3, nGroups );
-   bsW ( s, 15, nSelectors );
-   for (i = 0; i < nSelectors; i++) { 
-      for (j = 0; j < s->selectorMtf[i]; j++) bsW(s,1,1);
-      bsW(s,1,0);
-   }
-   if (s->verbosity >= 3)
-      VPrintf1( "selectors %d, ", s->numZ-nBytes );
-
-   /*--- Now the coding tables. ---*/
-   nBytes = s->numZ;
-
-   for (t = 0; t < nGroups; t++) {
-      Int32 curr = s->len[t][0];
-      bsW ( s, 5, curr );
-      for (i = 0; i < alphaSize; i++) {
-         while (curr < s->len[t][i]) { bsW(s,2,2); curr++; /* 10 */ };
-         while (curr > s->len[t][i]) { bsW(s,2,3); curr--; /* 11 */ };
-         bsW ( s, 1, 0 );
-      }
-   }
-
-   if (s->verbosity >= 3)
-      VPrintf1 ( "code lengths %d, ", s->numZ-nBytes );
-
-   /*--- And finally, the block data proper ---*/
-   nBytes = s->numZ;
-   selCtr = 0;
-   gs = 0;
-   while (True) {
-      if (gs >= s->nMTF) break;
-      ge = gs + BZ_G_SIZE - 1; 
-      if (ge >= s->nMTF) ge = s->nMTF-1;
-      AssertH ( s->selector[selCtr] < nGroups, 3006 );
-
-      if (nGroups == 6 && 50 == ge-gs+1) {
-            /*--- fast track the common case ---*/
-            UInt16 mtfv_i;
-            UChar* s_len_sel_selCtr 
-               = &(s->len[s->selector[selCtr]][0]);
-            Int32* s_code_sel_selCtr
-               = &(s->code[s->selector[selCtr]][0]);
-
-#           define BZ_ITAH(nn)                      \
-               mtfv_i = mtfv[gs+(nn)];              \
-               bsW ( s,                             \
-                     s_len_sel_selCtr[mtfv_i],      \
-                     s_code_sel_selCtr[mtfv_i] )
-
-            BZ_ITAH(0);  BZ_ITAH(1);  BZ_ITAH(2);  BZ_ITAH(3);  BZ_ITAH(4);
-            BZ_ITAH(5);  BZ_ITAH(6);  BZ_ITAH(7);  BZ_ITAH(8);  BZ_ITAH(9);
-            BZ_ITAH(10); BZ_ITAH(11); BZ_ITAH(12); BZ_ITAH(13); BZ_ITAH(14);
-            BZ_ITAH(15); BZ_ITAH(16); BZ_ITAH(17); BZ_ITAH(18); BZ_ITAH(19);
-            BZ_ITAH(20); BZ_ITAH(21); BZ_ITAH(22); BZ_ITAH(23); BZ_ITAH(24);
-            BZ_ITAH(25); BZ_ITAH(26); BZ_ITAH(27); BZ_ITAH(28); BZ_ITAH(29);
-            BZ_ITAH(30); BZ_ITAH(31); BZ_ITAH(32); BZ_ITAH(33); BZ_ITAH(34);
-            BZ_ITAH(35); BZ_ITAH(36); BZ_ITAH(37); BZ_ITAH(38); BZ_ITAH(39);
-            BZ_ITAH(40); BZ_ITAH(41); BZ_ITAH(42); BZ_ITAH(43); BZ_ITAH(44);
-            BZ_ITAH(45); BZ_ITAH(46); BZ_ITAH(47); BZ_ITAH(48); BZ_ITAH(49);
-
-#           undef BZ_ITAH
-
-      } else {
-	 /*--- slow version which correctly handles all situations ---*/
-         for (i = gs; i <= ge; i++) {
-            bsW ( s, 
-                  s->len  [s->selector[selCtr]] [mtfv[i]],
-                  s->code [s->selector[selCtr]] [mtfv[i]] );
-         }
-      }
-
-
-      gs = ge+1;
-      selCtr++;
-   }
-   AssertH( selCtr == nSelectors, 3007 );
-
-   if (s->verbosity >= 3)
-      VPrintf1( "codes %d\n", s->numZ-nBytes );
-}
-
-
-/*---------------------------------------------------*/
-void BZ2_compressBlock ( EState* s, Bool is_last_block )
-{
-   if (s->nblock > 0) {
-
-      BZ_FINALISE_CRC ( s->blockCRC );
-      s->combinedCRC = (s->combinedCRC << 1) | (s->combinedCRC >> 31);
-      s->combinedCRC ^= s->blockCRC;
-      if (s->blockNo > 1) s->numZ = 0;
-
-      if (s->verbosity >= 2)
-         VPrintf4( "    block %d: crc = 0x%8x, "
-                   "combined CRC = 0x%8x, size = %d\n",
-                   s->blockNo, s->blockCRC, s->combinedCRC, s->nblock );
-
-      BZ2_blockSort ( s );
-   }
-
-   s->zbits = (UChar*) (&((UChar*)s->arr2)[s->nblock]);
-
-   /*-- If this is the first block, create the stream header. --*/
-   if (s->blockNo == 1) {
-      BZ2_bsInitWrite ( s );
-      bsPutUChar ( s, 'B' );
-      bsPutUChar ( s, 'Z' );
-      bsPutUChar ( s, 'h' );
-      bsPutUChar ( s, (UChar)('0' + s->blockSize100k) );
-   }
-
-   if (s->nblock > 0) {
-
-      bsPutUChar ( s, 0x31 ); bsPutUChar ( s, 0x41 );
-      bsPutUChar ( s, 0x59 ); bsPutUChar ( s, 0x26 );
-      bsPutUChar ( s, 0x53 ); bsPutUChar ( s, 0x59 );
-
-      /*-- Now the block's CRC, so it is in a known place. --*/
-      bsPutUInt32 ( s, s->blockCRC );
-
-      /*-- 
-         Now a single bit indicating (non-)randomisation. 
-         As of version 0.9.5, we use a better sorting algorithm
-         which makes randomisation unnecessary.  So always set
-         the randomised bit to 'no'.  Of course, the decoder
-         still needs to be able to handle randomised blocks
-         so as to maintain backwards compatibility with
-         older versions of bzip2.
-      --*/
-      bsW(s,1,0);
-
-      bsW ( s, 24, s->origPtr );
-      generateMTFValues ( s );
-      sendMTFValues ( s );
-   }
-
-
-   /*-- If this is the last block, add the stream trailer. --*/
-   if (is_last_block) {
-
-      bsPutUChar ( s, 0x17 ); bsPutUChar ( s, 0x72 );
-      bsPutUChar ( s, 0x45 ); bsPutUChar ( s, 0x38 );
-      bsPutUChar ( s, 0x50 ); bsPutUChar ( s, 0x90 );
-      bsPutUInt32 ( s, s->combinedCRC );
-      if (s->verbosity >= 2)
-         VPrintf1( "    final combined CRC = 0x%x\n   ", s->combinedCRC );
-      bsFinishWrite ( s );
-   }
-}
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                        compress.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/crctable.c b/mdk-stage1/bzlib/crctable.c
deleted file mode 100644
index c0ea3f769..000000000
--- a/mdk-stage1/bzlib/crctable.c
+++ /dev/null
@@ -1,148 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Table for doing CRCs                                  ---*/
-/*---                                            crctable.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-/*--
-  I think this is an implementation of the AUTODIN-II,
-  Ethernet & FDDI 32-bit CRC standard.  Vaguely derived
-  from code by Rob Warnock, in Section 51 of the
-  comp.compression FAQ.
---*/
-
-UInt32 BZ2_crc32Table[256] = {
-
-   /*-- Ugly, innit? --*/
-
-   0x00000000L, 0x04c11db7L, 0x09823b6eL, 0x0d4326d9L,
-   0x130476dcL, 0x17c56b6bL, 0x1a864db2L, 0x1e475005L,
-   0x2608edb8L, 0x22c9f00fL, 0x2f8ad6d6L, 0x2b4bcb61L,
-   0x350c9b64L, 0x31cd86d3L, 0x3c8ea00aL, 0x384fbdbdL,
-   0x4c11db70L, 0x48d0c6c7L, 0x4593e01eL, 0x4152fda9L,
-   0x5f15adacL, 0x5bd4b01bL, 0x569796c2L, 0x52568b75L,
-   0x6a1936c8L, 0x6ed82b7fL, 0x639b0da6L, 0x675a1011L,
-   0x791d4014L, 0x7ddc5da3L, 0x709f7b7aL, 0x745e66cdL,
-   0x9823b6e0L, 0x9ce2ab57L, 0x91a18d8eL, 0x95609039L,
-   0x8b27c03cL, 0x8fe6dd8bL, 0x82a5fb52L, 0x8664e6e5L,
-   0xbe2b5b58L, 0xbaea46efL, 0xb7a96036L, 0xb3687d81L,
-   0xad2f2d84L, 0xa9ee3033L, 0xa4ad16eaL, 0xa06c0b5dL,
-   0xd4326d90L, 0xd0f37027L, 0xddb056feL, 0xd9714b49L,
-   0xc7361b4cL, 0xc3f706fbL, 0xceb42022L, 0xca753d95L,
-   0xf23a8028L, 0xf6fb9d9fL, 0xfbb8bb46L, 0xff79a6f1L,
-   0xe13ef6f4L, 0xe5ffeb43L, 0xe8bccd9aL, 0xec7dd02dL,
-   0x34867077L, 0x30476dc0L, 0x3d044b19L, 0x39c556aeL,
-   0x278206abL, 0x23431b1cL, 0x2e003dc5L, 0x2ac12072L,
-   0x128e9dcfL, 0x164f8078L, 0x1b0ca6a1L, 0x1fcdbb16L,
-   0x018aeb13L, 0x054bf6a4L, 0x0808d07dL, 0x0cc9cdcaL,
-   0x7897ab07L, 0x7c56b6b0L, 0x71159069L, 0x75d48ddeL,
-   0x6b93dddbL, 0x6f52c06cL, 0x6211e6b5L, 0x66d0fb02L,
-   0x5e9f46bfL, 0x5a5e5b08L, 0x571d7dd1L, 0x53dc6066L,
-   0x4d9b3063L, 0x495a2dd4L, 0x44190b0dL, 0x40d816baL,
-   0xaca5c697L, 0xa864db20L, 0xa527fdf9L, 0xa1e6e04eL,
-   0xbfa1b04bL, 0xbb60adfcL, 0xb6238b25L, 0xb2e29692L,
-   0x8aad2b2fL, 0x8e6c3698L, 0x832f1041L, 0x87ee0df6L,
-   0x99a95df3L, 0x9d684044L, 0x902b669dL, 0x94ea7b2aL,
-   0xe0b41de7L, 0xe4750050L, 0xe9362689L, 0xedf73b3eL,
-   0xf3b06b3bL, 0xf771768cL, 0xfa325055L, 0xfef34de2L,
-   0xc6bcf05fL, 0xc27dede8L, 0xcf3ecb31L, 0xcbffd686L,
-   0xd5b88683L, 0xd1799b34L, 0xdc3abdedL, 0xd8fba05aL,
-   0x690ce0eeL, 0x6dcdfd59L, 0x608edb80L, 0x644fc637L,
-   0x7a089632L, 0x7ec98b85L, 0x738aad5cL, 0x774bb0ebL,
-   0x4f040d56L, 0x4bc510e1L, 0x46863638L, 0x42472b8fL,
-   0x5c007b8aL, 0x58c1663dL, 0x558240e4L, 0x51435d53L,
-   0x251d3b9eL, 0x21dc2629L, 0x2c9f00f0L, 0x285e1d47L,
-   0x36194d42L, 0x32d850f5L, 0x3f9b762cL, 0x3b5a6b9bL,
-   0x0315d626L, 0x07d4cb91L, 0x0a97ed48L, 0x0e56f0ffL,
-   0x1011a0faL, 0x14d0bd4dL, 0x19939b94L, 0x1d528623L,
-   0xf12f560eL, 0xf5ee4bb9L, 0xf8ad6d60L, 0xfc6c70d7L,
-   0xe22b20d2L, 0xe6ea3d65L, 0xeba91bbcL, 0xef68060bL,
-   0xd727bbb6L, 0xd3e6a601L, 0xdea580d8L, 0xda649d6fL,
-   0xc423cd6aL, 0xc0e2d0ddL, 0xcda1f604L, 0xc960ebb3L,
-   0xbd3e8d7eL, 0xb9ff90c9L, 0xb4bcb610L, 0xb07daba7L,
-   0xae3afba2L, 0xaafbe615L, 0xa7b8c0ccL, 0xa379dd7bL,
-   0x9b3660c6L, 0x9ff77d71L, 0x92b45ba8L, 0x9675461fL,
-   0x8832161aL, 0x8cf30badL, 0x81b02d74L, 0x857130c3L,
-   0x5d8a9099L, 0x594b8d2eL, 0x5408abf7L, 0x50c9b640L,
-   0x4e8ee645L, 0x4a4ffbf2L, 0x470cdd2bL, 0x43cdc09cL,
-   0x7b827d21L, 0x7f436096L, 0x7200464fL, 0x76c15bf8L,
-   0x68860bfdL, 0x6c47164aL, 0x61043093L, 0x65c52d24L,
-   0x119b4be9L, 0x155a565eL, 0x18197087L, 0x1cd86d30L,
-   0x029f3d35L, 0x065e2082L, 0x0b1d065bL, 0x0fdc1becL,
-   0x3793a651L, 0x3352bbe6L, 0x3e119d3fL, 0x3ad08088L,
-   0x2497d08dL, 0x2056cd3aL, 0x2d15ebe3L, 0x29d4f654L,
-   0xc5a92679L, 0xc1683bceL, 0xcc2b1d17L, 0xc8ea00a0L,
-   0xd6ad50a5L, 0xd26c4d12L, 0xdf2f6bcbL, 0xdbee767cL,
-   0xe3a1cbc1L, 0xe760d676L, 0xea23f0afL, 0xeee2ed18L,
-   0xf0a5bd1dL, 0xf464a0aaL, 0xf9278673L, 0xfde69bc4L,
-   0x89b8fd09L, 0x8d79e0beL, 0x803ac667L, 0x84fbdbd0L,
-   0x9abc8bd5L, 0x9e7d9662L, 0x933eb0bbL, 0x97ffad0cL,
-   0xafb010b1L, 0xab710d06L, 0xa6322bdfL, 0xa2f33668L,
-   0xbcb4666dL, 0xb8757bdaL, 0xb5365d03L, 0xb1f740b4L
-};
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                        crctable.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/decompress.c b/mdk-stage1/bzlib/decompress.c
deleted file mode 100644
index 65cf75d8f..000000000
--- a/mdk-stage1/bzlib/decompress.c
+++ /dev/null
@@ -1,664 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Decompression machinery                               ---*/
-/*---                                          decompress.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-
-/*---------------------------------------------------*/
-static
-void makeMaps_d ( DState* s )
-{
-   Int32 i;
-   s->nInUse = 0;
-   for (i = 0; i < 256; i++)
-      if (s->inUse[i]) {
-         s->seqToUnseq[s->nInUse] = i;
-         s->nInUse++;
-      }
-}
-
-
-/*---------------------------------------------------*/
-#define RETURN(rrr)                               \
-   { retVal = rrr; goto save_state_and_return; };
-
-#define GET_BITS(lll,vvv,nnn)                     \
-   case lll: s->state = lll;                      \
-   while (True) {                                 \
-      if (s->bsLive >= nnn) {                     \
-         UInt32 v;                                \
-         v = (s->bsBuff >>                        \
-             (s->bsLive-nnn)) & ((1 << nnn)-1);   \
-         s->bsLive -= nnn;                        \
-         vvv = v;                                 \
-         break;                                   \
-      }                                           \
-      if (s->strm->avail_in == 0) RETURN(BZ_OK);  \
-      s->bsBuff                                   \
-         = (s->bsBuff << 8) |                     \
-           ((UInt32)                              \
-              (*((UChar*)(s->strm->next_in))));   \
-      s->bsLive += 8;                             \
-      s->strm->next_in++;                         \
-      s->strm->avail_in--;                        \
-      s->strm->total_in_lo32++;                   \
-      if (s->strm->total_in_lo32 == 0)            \
-         s->strm->total_in_hi32++;                \
-   }
-
-#define GET_UCHAR(lll,uuu)                        \
-   GET_BITS(lll,uuu,8)
-
-#define GET_BIT(lll,uuu)                          \
-   GET_BITS(lll,uuu,1)
-
-/*---------------------------------------------------*/
-#define GET_MTF_VAL(label1,label2,lval)           \
-{                                                 \
-   if (groupPos == 0) {                           \
-      groupNo++;                                  \
-      if (groupNo >= nSelectors)                  \
-         RETURN(BZ_DATA_ERROR);                   \
-      groupPos = BZ_G_SIZE;                       \
-      gSel = s->selector[groupNo];                \
-      gMinlen = s->minLens[gSel];                 \
-      gLimit = &(s->limit[gSel][0]);              \
-      gPerm = &(s->perm[gSel][0]);                \
-      gBase = &(s->base[gSel][0]);                \
-   }                                              \
-   groupPos--;                                    \
-   zn = gMinlen;                                  \
-   GET_BITS(label1, zvec, zn);                    \
-   while (1) {                                    \
-      if (zn > 20 /* the longest code */)         \
-         RETURN(BZ_DATA_ERROR);                   \
-      if (zvec <= gLimit[zn]) break;              \
-      zn++;                                       \
-      GET_BIT(label2, zj);                        \
-      zvec = (zvec << 1) | zj;                    \
-   };                                             \
-   if (zvec - gBase[zn] < 0                       \
-       || zvec - gBase[zn] >= BZ_MAX_ALPHA_SIZE)  \
-      RETURN(BZ_DATA_ERROR);                      \
-   lval = gPerm[zvec - gBase[zn]];                \
-}
-
-
-/*---------------------------------------------------*/
-Int32 BZ2_decompress ( DState* s )
-{
-   UChar      uc;
-   Int32      retVal;
-   Int32      minLen, maxLen;
-   bz_stream* strm = s->strm;
-
-   /* stuff that needs to be saved/restored */
-   Int32  i;
-   Int32  j;
-   Int32  t;
-   Int32  alphaSize;
-   Int32  nGroups;
-   Int32  nSelectors;
-   Int32  EOB;
-   Int32  groupNo;
-   Int32  groupPos;
-   Int32  nextSym;
-   Int32  nblockMAX;
-   Int32  nblock;
-   Int32  es;
-   Int32  N;
-   Int32  curr;
-   Int32  zt;
-   Int32  zn; 
-   Int32  zvec;
-   Int32  zj;
-   Int32  gSel;
-   Int32  gMinlen;
-   Int32* gLimit;
-   Int32* gBase;
-   Int32* gPerm;
-
-   if (s->state == BZ_X_MAGIC_1) {
-      /*initialise the save area*/
-      s->save_i           = 0;
-      s->save_j           = 0;
-      s->save_t           = 0;
-      s->save_alphaSize   = 0;
-      s->save_nGroups     = 0;
-      s->save_nSelectors  = 0;
-      s->save_EOB         = 0;
-      s->save_groupNo     = 0;
-      s->save_groupPos    = 0;
-      s->save_nextSym     = 0;
-      s->save_nblockMAX   = 0;
-      s->save_nblock      = 0;
-      s->save_es          = 0;
-      s->save_N           = 0;
-      s->save_curr        = 0;
-      s->save_zt          = 0;
-      s->save_zn          = 0;
-      s->save_zvec        = 0;
-      s->save_zj          = 0;
-      s->save_gSel        = 0;
-      s->save_gMinlen     = 0;
-      s->save_gLimit      = NULL;
-      s->save_gBase       = NULL;
-      s->save_gPerm       = NULL;
-   }
-
-   /*restore from the save area*/
-   i           = s->save_i;
-   j           = s->save_j;
-   t           = s->save_t;
-   alphaSize   = s->save_alphaSize;
-   nGroups     = s->save_nGroups;
-   nSelectors  = s->save_nSelectors;
-   EOB         = s->save_EOB;
-   groupNo     = s->save_groupNo;
-   groupPos    = s->save_groupPos;
-   nextSym     = s->save_nextSym;
-   nblockMAX   = s->save_nblockMAX;
-   nblock      = s->save_nblock;
-   es          = s->save_es;
-   N           = s->save_N;
-   curr        = s->save_curr;
-   zt          = s->save_zt;
-   zn          = s->save_zn; 
-   zvec        = s->save_zvec;
-   zj          = s->save_zj;
-   gSel        = s->save_gSel;
-   gMinlen     = s->save_gMinlen;
-   gLimit      = s->save_gLimit;
-   gBase       = s->save_gBase;
-   gPerm       = s->save_gPerm;
-
-   retVal = BZ_OK;
-
-   switch (s->state) {
-
-      GET_UCHAR(BZ_X_MAGIC_1, uc);
-      if (uc != 'B') RETURN(BZ_DATA_ERROR_MAGIC);
-
-      GET_UCHAR(BZ_X_MAGIC_2, uc);
-      if (uc != 'Z') RETURN(BZ_DATA_ERROR_MAGIC);
-
-      GET_UCHAR(BZ_X_MAGIC_3, uc)
-      if (uc != 'h') RETURN(BZ_DATA_ERROR_MAGIC);
-
-      GET_BITS(BZ_X_MAGIC_4, s->blockSize100k, 8)
-      if (s->blockSize100k < '1' || 
-          s->blockSize100k > '9') RETURN(BZ_DATA_ERROR_MAGIC);
-      s->blockSize100k -= '0';
-
-      if (s->smallDecompress) {
-         s->ll16 = BZALLOC( s->blockSize100k * 100000 * sizeof(UInt16) );
-         s->ll4  = BZALLOC( 
-                      ((1 + s->blockSize100k * 100000) >> 1) * sizeof(UChar) 
-                   );
-         if (s->ll16 == NULL || s->ll4 == NULL) RETURN(BZ_MEM_ERROR);
-      } else {
-         s->tt  = BZALLOC( s->blockSize100k * 100000 * sizeof(Int32) );
-         if (s->tt == NULL) RETURN(BZ_MEM_ERROR);
-      }
-
-      GET_UCHAR(BZ_X_BLKHDR_1, uc);
-
-      if (uc == 0x17) goto endhdr_2;
-      if (uc != 0x31) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_BLKHDR_2, uc);
-      if (uc != 0x41) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_BLKHDR_3, uc);
-      if (uc != 0x59) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_BLKHDR_4, uc);
-      if (uc != 0x26) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_BLKHDR_5, uc);
-      if (uc != 0x53) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_BLKHDR_6, uc);
-      if (uc != 0x59) RETURN(BZ_DATA_ERROR);
-
-      s->currBlockNo++;
-      if (s->verbosity >= 2)
-         VPrintf1 ( "\n    [%d: huff+mtf ", s->currBlockNo );
- 
-      s->storedBlockCRC = 0;
-      GET_UCHAR(BZ_X_BCRC_1, uc);
-      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
-      GET_UCHAR(BZ_X_BCRC_2, uc);
-      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
-      GET_UCHAR(BZ_X_BCRC_3, uc);
-      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
-      GET_UCHAR(BZ_X_BCRC_4, uc);
-      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
-
-      GET_BITS(BZ_X_RANDBIT, s->blockRandomised, 1);
-
-      s->origPtr = 0;
-      GET_UCHAR(BZ_X_ORIGPTR_1, uc);
-      s->origPtr = (s->origPtr << 8) | ((Int32)uc);
-      GET_UCHAR(BZ_X_ORIGPTR_2, uc);
-      s->origPtr = (s->origPtr << 8) | ((Int32)uc);
-      GET_UCHAR(BZ_X_ORIGPTR_3, uc);
-      s->origPtr = (s->origPtr << 8) | ((Int32)uc);
-
-      if (s->origPtr < 0)
-         RETURN(BZ_DATA_ERROR);
-      if (s->origPtr > 10 + 100000*s->blockSize100k) 
-         RETURN(BZ_DATA_ERROR);
-
-      /*--- Receive the mapping table ---*/
-      for (i = 0; i < 16; i++) {
-         GET_BIT(BZ_X_MAPPING_1, uc);
-         if (uc == 1) 
-            s->inUse16[i] = True; else 
-            s->inUse16[i] = False;
-      }
-
-      for (i = 0; i < 256; i++) s->inUse[i] = False;
-
-      for (i = 0; i < 16; i++)
-         if (s->inUse16[i])
-            for (j = 0; j < 16; j++) {
-               GET_BIT(BZ_X_MAPPING_2, uc);
-               if (uc == 1) s->inUse[i * 16 + j] = True;
-            }
-      makeMaps_d ( s );
-      if (s->nInUse == 0) RETURN(BZ_DATA_ERROR);
-      alphaSize = s->nInUse+2;
-
-      /*--- Now the selectors ---*/
-      GET_BITS(BZ_X_SELECTOR_1, nGroups, 3);
-      if (nGroups < 2 || nGroups > 6) RETURN(BZ_DATA_ERROR);
-      GET_BITS(BZ_X_SELECTOR_2, nSelectors, 15);
-      if (nSelectors < 1) RETURN(BZ_DATA_ERROR);
-      for (i = 0; i < nSelectors; i++) {
-         j = 0;
-         while (True) {
-            GET_BIT(BZ_X_SELECTOR_3, uc);
-            if (uc == 0) break;
-            j++;
-            if (j >= nGroups) RETURN(BZ_DATA_ERROR);
-         }
-         s->selectorMtf[i] = j;
-      }
-
-      /*--- Undo the MTF values for the selectors. ---*/
-      {
-         UChar pos[BZ_N_GROUPS], tmp, v;
-         for (v = 0; v < nGroups; v++) pos[v] = v;
-   
-         for (i = 0; i < nSelectors; i++) {
-            v = s->selectorMtf[i];
-            tmp = pos[v];
-            while (v > 0) { pos[v] = pos[v-1]; v--; }
-            pos[0] = tmp;
-            s->selector[i] = tmp;
-         }
-      }
-
-      /*--- Now the coding tables ---*/
-      for (t = 0; t < nGroups; t++) {
-         GET_BITS(BZ_X_CODING_1, curr, 5);
-         for (i = 0; i < alphaSize; i++) {
-            while (True) {
-               if (curr < 1 || curr > 20) RETURN(BZ_DATA_ERROR);
-               GET_BIT(BZ_X_CODING_2, uc);
-               if (uc == 0) break;
-               GET_BIT(BZ_X_CODING_3, uc);
-               if (uc == 0) curr++; else curr--;
-            }
-            s->len[t][i] = curr;
-         }
-      }
-
-      /*--- Create the Huffman decoding tables ---*/
-      for (t = 0; t < nGroups; t++) {
-         minLen = 32;
-         maxLen = 0;
-         for (i = 0; i < alphaSize; i++) {
-            if (s->len[t][i] > maxLen) maxLen = s->len[t][i];
-            if (s->len[t][i] < minLen) minLen = s->len[t][i];
-         }
-         BZ2_hbCreateDecodeTables ( 
-            &(s->limit[t][0]), 
-            &(s->base[t][0]), 
-            &(s->perm[t][0]), 
-            &(s->len[t][0]),
-            minLen, maxLen, alphaSize
-         );
-         s->minLens[t] = minLen;
-      }
-
-      /*--- Now the MTF values ---*/
-
-      EOB      = s->nInUse+1;
-      nblockMAX = 100000 * s->blockSize100k;
-      groupNo  = -1;
-      groupPos = 0;
-
-      for (i = 0; i <= 255; i++) s->unzftab[i] = 0;
-
-      /*-- MTF init --*/
-      {
-         Int32 ii, jj, kk;
-         kk = MTFA_SIZE-1;
-         for (ii = 256 / MTFL_SIZE - 1; ii >= 0; ii--) {
-            for (jj = MTFL_SIZE-1; jj >= 0; jj--) {
-               s->mtfa[kk] = (UChar)(ii * MTFL_SIZE + jj);
-               kk--;
-            }
-            s->mtfbase[ii] = kk + 1;
-         }
-      }
-      /*-- end MTF init --*/
-
-      nblock = 0;
-      GET_MTF_VAL(BZ_X_MTF_1, BZ_X_MTF_2, nextSym);
-
-      while (True) {
-
-         if (nextSym == EOB) break;
-
-         if (nextSym == BZ_RUNA || nextSym == BZ_RUNB) {
-
-            es = -1;
-            N = 1;
-            do {
-               if (nextSym == BZ_RUNA) es = es + (0+1) * N; else
-               if (nextSym == BZ_RUNB) es = es + (1+1) * N;
-               N = N * 2;
-               GET_MTF_VAL(BZ_X_MTF_3, BZ_X_MTF_4, nextSym);
-            }
-               while (nextSym == BZ_RUNA || nextSym == BZ_RUNB);
-
-            es++;
-            uc = s->seqToUnseq[ s->mtfa[s->mtfbase[0]] ];
-            s->unzftab[uc] += es;
-
-            if (s->smallDecompress)
-               while (es > 0) {
-                  if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
-                  s->ll16[nblock] = (UInt16)uc;
-                  nblock++;
-                  es--;
-               }
-            else
-               while (es > 0) {
-                  if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
-                  s->tt[nblock] = (UInt32)uc;
-                  nblock++;
-                  es--;
-               };
-
-            continue;
-
-         } else {
-
-            if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
-
-            /*-- uc = MTF ( nextSym-1 ) --*/
-            {
-               Int32 ii, jj, kk, pp, lno, off;
-               UInt32 nn;
-               nn = (UInt32)(nextSym - 1);
-
-               if (nn < MTFL_SIZE) {
-                  /* avoid general-case expense */
-                  pp = s->mtfbase[0];
-                  uc = s->mtfa[pp+nn];
-                  while (nn > 3) {
-                     Int32 z = pp+nn;
-                     s->mtfa[(z)  ] = s->mtfa[(z)-1];
-                     s->mtfa[(z)-1] = s->mtfa[(z)-2];
-                     s->mtfa[(z)-2] = s->mtfa[(z)-3];
-                     s->mtfa[(z)-3] = s->mtfa[(z)-4];
-                     nn -= 4;
-                  }
-                  while (nn > 0) { 
-                     s->mtfa[(pp+nn)] = s->mtfa[(pp+nn)-1]; nn--; 
-                  };
-                  s->mtfa[pp] = uc;
-               } else { 
-                  /* general case */
-                  lno = nn / MTFL_SIZE;
-                  off = nn % MTFL_SIZE;
-                  pp = s->mtfbase[lno] + off;
-                  uc = s->mtfa[pp];
-                  while (pp > s->mtfbase[lno]) { 
-                     s->mtfa[pp] = s->mtfa[pp-1]; pp--; 
-                  };
-                  s->mtfbase[lno]++;
-                  while (lno > 0) {
-                     s->mtfbase[lno]--;
-                     s->mtfa[s->mtfbase[lno]] 
-                        = s->mtfa[s->mtfbase[lno-1] + MTFL_SIZE - 1];
-                     lno--;
-                  }
-                  s->mtfbase[0]--;
-                  s->mtfa[s->mtfbase[0]] = uc;
-                  if (s->mtfbase[0] == 0) {
-                     kk = MTFA_SIZE-1;
-                     for (ii = 256 / MTFL_SIZE-1; ii >= 0; ii--) {
-                        for (jj = MTFL_SIZE-1; jj >= 0; jj--) {
-                           s->mtfa[kk] = s->mtfa[s->mtfbase[ii] + jj];
-                           kk--;
-                        }
-                        s->mtfbase[ii] = kk + 1;
-                     }
-                  }
-               }
-            }
-            /*-- end uc = MTF ( nextSym-1 ) --*/
-
-            s->unzftab[s->seqToUnseq[uc]]++;
-            if (s->smallDecompress)
-               s->ll16[nblock] = (UInt16)(s->seqToUnseq[uc]); else
-               s->tt[nblock]   = (UInt32)(s->seqToUnseq[uc]);
-            nblock++;
-
-            GET_MTF_VAL(BZ_X_MTF_5, BZ_X_MTF_6, nextSym);
-            continue;
-         }
-      }
-
-      /* Now we know what nblock is, we can do a better sanity
-         check on s->origPtr.
-      */
-      if (s->origPtr < 0 || s->origPtr >= nblock)
-         RETURN(BZ_DATA_ERROR);
-
-      s->state_out_len = 0;
-      s->state_out_ch  = 0;
-      BZ_INITIALISE_CRC ( s->calculatedBlockCRC );
-      s->state = BZ_X_OUTPUT;
-      if (s->verbosity >= 2) VPrintf0 ( "rt+rld" );
-
-      /*-- Set up cftab to facilitate generation of T^(-1) --*/
-      s->cftab[0] = 0;
-      for (i = 1; i <= 256; i++) s->cftab[i] = s->unzftab[i-1];
-      for (i = 1; i <= 256; i++) s->cftab[i] += s->cftab[i-1];
-
-      if (s->smallDecompress) {
-
-         /*-- Make a copy of cftab, used in generation of T --*/
-         for (i = 0; i <= 256; i++) s->cftabCopy[i] = s->cftab[i];
-
-         /*-- compute the T vector --*/
-         for (i = 0; i < nblock; i++) {
-            uc = (UChar)(s->ll16[i]);
-            SET_LL(i, s->cftabCopy[uc]);
-            s->cftabCopy[uc]++;
-         }
-
-         /*-- Compute T^(-1) by pointer reversal on T --*/
-         i = s->origPtr;
-         j = GET_LL(i);
-         do {
-            Int32 tmp = GET_LL(j);
-            SET_LL(j, i);
-            i = j;
-            j = tmp;
-         }
-            while (i != s->origPtr);
-
-         s->tPos = s->origPtr;
-         s->nblock_used = 0;
-         if (s->blockRandomised) {
-            BZ_RAND_INIT_MASK;
-            BZ_GET_SMALL(s->k0); s->nblock_used++;
-            BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK; 
-         } else {
-            BZ_GET_SMALL(s->k0); s->nblock_used++;
-         }
-
-      } else {
-
-         /*-- compute the T^(-1) vector --*/
-         for (i = 0; i < nblock; i++) {
-            uc = (UChar)(s->tt[i] & 0xff);
-            s->tt[s->cftab[uc]] |= (i << 8);
-            s->cftab[uc]++;
-         }
-
-         s->tPos = s->tt[s->origPtr] >> 8;
-         s->nblock_used = 0;
-         if (s->blockRandomised) {
-            BZ_RAND_INIT_MASK;
-            BZ_GET_FAST(s->k0); s->nblock_used++;
-            BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK; 
-         } else {
-            BZ_GET_FAST(s->k0); s->nblock_used++;
-         }
-
-      }
-
-      RETURN(BZ_OK);
-
-
-
-    endhdr_2:
-
-      GET_UCHAR(BZ_X_ENDHDR_2, uc);
-      if (uc != 0x72) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_ENDHDR_3, uc);
-      if (uc != 0x45) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_ENDHDR_4, uc);
-      if (uc != 0x38) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_ENDHDR_5, uc);
-      if (uc != 0x50) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_ENDHDR_6, uc);
-      if (uc != 0x90) RETURN(BZ_DATA_ERROR);
-
-      s->storedCombinedCRC = 0;
-      GET_UCHAR(BZ_X_CCRC_1, uc);
-      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
-      GET_UCHAR(BZ_X_CCRC_2, uc);
-      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
-      GET_UCHAR(BZ_X_CCRC_3, uc);
-      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
-      GET_UCHAR(BZ_X_CCRC_4, uc);
-      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
-
-      s->state = BZ_X_IDLE;
-      RETURN(BZ_STREAM_END);
-
-      default: AssertH ( False, 4001 );
-   }
-
-   AssertH ( False, 4002 );
-
-   save_state_and_return:
-
-   s->save_i           = i;
-   s->save_j           = j;
-   s->save_t           = t;
-   s->save_alphaSize   = alphaSize;
-   s->save_nGroups     = nGroups;
-   s->save_nSelectors  = nSelectors;
-   s->save_EOB         = EOB;
-   s->save_groupNo     = groupNo;
-   s->save_groupPos    = groupPos;
-   s->save_nextSym     = nextSym;
-   s->save_nblockMAX   = nblockMAX;
-   s->save_nblock      = nblock;
-   s->save_es          = es;
-   s->save_N           = N;
-   s->save_curr        = curr;
-   s->save_zt          = zt;
-   s->save_zn          = zn;
-   s->save_zvec        = zvec;
-   s->save_zj          = zj;
-   s->save_gSel        = gSel;
-   s->save_gMinlen     = gMinlen;
-   s->save_gLimit      = gLimit;
-   s->save_gBase       = gBase;
-   s->save_gPerm       = gPerm;
-
-   return retVal;   
-}
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                      decompress.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/huffman.c b/mdk-stage1/bzlib/huffman.c
deleted file mode 100644
index 8994f0bb9..000000000
--- a/mdk-stage1/bzlib/huffman.c
+++ /dev/null
@@ -1,232 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Huffman coding low-level stuff                        ---*/
-/*---                                             huffman.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-/*---------------------------------------------------*/
-#define WEIGHTOF(zz0)  ((zz0) & 0xffffff00)
-#define DEPTHOF(zz1)   ((zz1) & 0x000000ff)
-#define MYMAX(zz2,zz3) ((zz2) > (zz3) ? (zz2) : (zz3))
-
-#define ADDWEIGHTS(zw1,zw2)                           \
-   (WEIGHTOF(zw1)+WEIGHTOF(zw2)) |                    \
-   (1 + MYMAX(DEPTHOF(zw1),DEPTHOF(zw2)))
-
-#define UPHEAP(z)                                     \
-{                                                     \
-   Int32 zz, tmp;                                     \
-   zz = z; tmp = heap[zz];                            \
-   while (weight[tmp] < weight[heap[zz >> 1]]) {      \
-      heap[zz] = heap[zz >> 1];                       \
-      zz >>= 1;                                       \
-   }                                                  \
-   heap[zz] = tmp;                                    \
-}
-
-#define DOWNHEAP(z)                                   \
-{                                                     \
-   Int32 zz, yy, tmp;                                 \
-   zz = z; tmp = heap[zz];                            \
-   while (True) {                                     \
-      yy = zz << 1;                                   \
-      if (yy > nHeap) break;                          \
-      if (yy < nHeap &&                               \
-          weight[heap[yy+1]] < weight[heap[yy]])      \
-         yy++;                                        \
-      if (weight[tmp] < weight[heap[yy]]) break;      \
-      heap[zz] = heap[yy];                            \
-      zz = yy;                                        \
-   }                                                  \
-   heap[zz] = tmp;                                    \
-}
-
-
-/*---------------------------------------------------*/
-void BZ2_hbMakeCodeLengths ( UChar *len, 
-                             Int32 *freq,
-                             Int32 alphaSize,
-                             Int32 maxLen )
-{
-   /*--
-      Nodes and heap entries run from 1.  Entry 0
-      for both the heap and nodes is a sentinel.
-   --*/
-   Int32 nNodes, nHeap, n1, n2, i, j, k;
-   Bool  tooLong;
-
-   Int32 heap   [ BZ_MAX_ALPHA_SIZE + 2 ];
-   Int32 weight [ BZ_MAX_ALPHA_SIZE * 2 ];
-   Int32 parent [ BZ_MAX_ALPHA_SIZE * 2 ]; 
-
-   for (i = 0; i < alphaSize; i++)
-      weight[i+1] = (freq[i] == 0 ? 1 : freq[i]) << 8;
-
-   while (True) {
-
-      nNodes = alphaSize;
-      nHeap = 0;
-
-      heap[0] = 0;
-      weight[0] = 0;
-      parent[0] = -2;
-
-      for (i = 1; i <= alphaSize; i++) {
-         parent[i] = -1;
-         nHeap++;
-         heap[nHeap] = i;
-         UPHEAP(nHeap);
-      }
-
-      AssertH( nHeap < (BZ_MAX_ALPHA_SIZE+2), 2001 );
-   
-      while (nHeap > 1) {
-         n1 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
-         n2 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
-         nNodes++;
-         parent[n1] = parent[n2] = nNodes;
-         weight[nNodes] = ADDWEIGHTS(weight[n1], weight[n2]);
-         parent[nNodes] = -1;
-         nHeap++;
-         heap[nHeap] = nNodes;
-         UPHEAP(nHeap);
-      }
-
-      AssertH( nNodes < (BZ_MAX_ALPHA_SIZE * 2), 2002 );
-
-      tooLong = False;
-      for (i = 1; i <= alphaSize; i++) {
-         j = 0;
-         k = i;
-         while (parent[k] >= 0) { k = parent[k]; j++; }
-         len[i-1] = j;
-         if (j > maxLen) tooLong = True;
-      }
-      
-      if (! tooLong) break;
-
-      for (i = 1; i < alphaSize; i++) {
-         j = weight[i] >> 8;
-         j = 1 + (j / 2);
-         weight[i] = j << 8;
-      }
-   }
-}
-
-
-/*---------------------------------------------------*/
-void BZ2_hbAssignCodes ( Int32 *code,
-                         UChar *length,
-                         Int32 minLen,
-                         Int32 maxLen,
-                         Int32 alphaSize )
-{
-   Int32 n, vec, i;
-
-   vec = 0;
-   for (n = minLen; n <= maxLen; n++) {
-      for (i = 0; i < alphaSize; i++)
-         if (length[i] == n) { code[i] = vec; vec++; };
-      vec <<= 1;
-   }
-}
-
-
-/*---------------------------------------------------*/
-void BZ2_hbCreateDecodeTables ( Int32 *limit,
-                                Int32 *base,
-                                Int32 *perm,
-                                UChar *length,
-                                Int32 minLen,
-                                Int32 maxLen,
-                                Int32 alphaSize )
-{
-   Int32 pp, i, j, vec;
-
-   pp = 0;
-   for (i = minLen; i <= maxLen; i++)
-      for (j = 0; j < alphaSize; j++)
-         if (length[j] == i) { perm[pp] = j; pp++; };
-
-   for (i = 0; i < BZ_MAX_CODE_LEN; i++) base[i] = 0;
-   for (i = 0; i < alphaSize; i++) base[length[i]+1]++;
-
-   for (i = 1; i < BZ_MAX_CODE_LEN; i++) base[i] += base[i-1];
-
-   for (i = 0; i < BZ_MAX_CODE_LEN; i++) limit[i] = 0;
-   vec = 0;
-
-   for (i = minLen; i <= maxLen; i++) {
-      vec += (base[i+1] - base[i]);
-      limit[i] = vec-1;
-      vec <<= 1;
-   }
-   for (i = minLen + 1; i <= maxLen; i++)
-      base[i] = ((limit[i-1] + 1) << 1) - base[i];
-}
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                         huffman.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/randtable.c b/mdk-stage1/bzlib/randtable.c
deleted file mode 100644
index a1fc82cfb..000000000
--- a/mdk-stage1/bzlib/randtable.c
+++ /dev/null
@@ -1,128 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Table for randomising repetitive blocks               ---*/
-/*---                                           randtable.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-
-/*---------------------------------------------*/
-Int32 BZ2_rNums[512] = { 
-   619, 720, 127, 481, 931, 816, 813, 233, 566, 247, 
-   985, 724, 205, 454, 863, 491, 741, 242, 949, 214, 
-   733, 859, 335, 708, 621, 574, 73, 654, 730, 472, 
-   419, 436, 278, 496, 867, 210, 399, 680, 480, 51, 
-   878, 465, 811, 169, 869, 675, 611, 697, 867, 561, 
-   862, 687, 507, 283, 482, 129, 807, 591, 733, 623, 
-   150, 238, 59, 379, 684, 877, 625, 169, 643, 105, 
-   170, 607, 520, 932, 727, 476, 693, 425, 174, 647, 
-   73, 122, 335, 530, 442, 853, 695, 249, 445, 515, 
-   909, 545, 703, 919, 874, 474, 882, 500, 594, 612, 
-   641, 801, 220, 162, 819, 984, 589, 513, 495, 799, 
-   161, 604, 958, 533, 221, 400, 386, 867, 600, 782, 
-   382, 596, 414, 171, 516, 375, 682, 485, 911, 276, 
-   98, 553, 163, 354, 666, 933, 424, 341, 533, 870, 
-   227, 730, 475, 186, 263, 647, 537, 686, 600, 224, 
-   469, 68, 770, 919, 190, 373, 294, 822, 808, 206, 
-   184, 943, 795, 384, 383, 461, 404, 758, 839, 887, 
-   715, 67, 618, 276, 204, 918, 873, 777, 604, 560, 
-   951, 160, 578, 722, 79, 804, 96, 409, 713, 940, 
-   652, 934, 970, 447, 318, 353, 859, 672, 112, 785, 
-   645, 863, 803, 350, 139, 93, 354, 99, 820, 908, 
-   609, 772, 154, 274, 580, 184, 79, 626, 630, 742, 
-   653, 282, 762, 623, 680, 81, 927, 626, 789, 125, 
-   411, 521, 938, 300, 821, 78, 343, 175, 128, 250, 
-   170, 774, 972, 275, 999, 639, 495, 78, 352, 126, 
-   857, 956, 358, 619, 580, 124, 737, 594, 701, 612, 
-   669, 112, 134, 694, 363, 992, 809, 743, 168, 974, 
-   944, 375, 748, 52, 600, 747, 642, 182, 862, 81, 
-   344, 805, 988, 739, 511, 655, 814, 334, 249, 515, 
-   897, 955, 664, 981, 649, 113, 974, 459, 893, 228, 
-   433, 837, 553, 268, 926, 240, 102, 654, 459, 51, 
-   686, 754, 806, 760, 493, 403, 415, 394, 687, 700, 
-   946, 670, 656, 610, 738, 392, 760, 799, 887, 653, 
-   978, 321, 576, 617, 626, 502, 894, 679, 243, 440, 
-   680, 879, 194, 572, 640, 724, 926, 56, 204, 700, 
-   707, 151, 457, 449, 797, 195, 791, 558, 945, 679, 
-   297, 59, 87, 824, 713, 663, 412, 693, 342, 606, 
-   134, 108, 571, 364, 631, 212, 174, 643, 304, 329, 
-   343, 97, 430, 751, 497, 314, 983, 374, 822, 928, 
-   140, 206, 73, 263, 980, 736, 876, 478, 430, 305, 
-   170, 514, 364, 692, 829, 82, 855, 953, 676, 246, 
-   369, 970, 294, 750, 807, 827, 150, 790, 288, 923, 
-   804, 378, 215, 828, 592, 281, 565, 555, 710, 82, 
-   896, 831, 547, 261, 524, 462, 293, 465, 502, 56, 
-   661, 821, 976, 991, 658, 869, 905, 758, 745, 193, 
-   768, 550, 608, 933, 378, 286, 215, 979, 792, 961, 
-   61, 688, 793, 644, 986, 403, 106, 366, 905, 644, 
-   372, 567, 466, 434, 645, 210, 389, 550, 919, 135, 
-   780, 773, 635, 389, 707, 100, 626, 958, 165, 504, 
-   920, 176, 193, 713, 857, 265, 203, 50, 668, 108, 
-   645, 990, 626, 197, 510, 357, 358, 850, 858, 364, 
-   936, 638
-};
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                       randtable.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/cdrom.c b/mdk-stage1/cdrom.c
deleted file mode 100644
index c3ff2e802..000000000
--- a/mdk-stage1/cdrom.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <sys/mount.h>
-#include "stage1.h"
-#include "frontend.h"
-#include "modules.h"
-#include "probing.h"
-#include "log.h"
-#include "mount.h"
-
-#include "cdrom.h"
-
-
-static int mount_that_cd_device(char * dev_name)
-{
-	char device_fullname[50];
-
-	strcpy(device_fullname, "/dev/");
-	strcat(device_fullname, dev_name);
-
-	return my_mount(device_fullname, IMAGE_LOCATION, "iso9660", 0);
-}
-
-
-static int test_that_cd()
-{
-	return access(IMAGE_LOCATION LIVE_LOCATION, R_OK);
-}
-
-
-static enum return_type try_with_device(char * dev_name, char * dev_model);
-
-static enum return_type do_with_device(char * dev_name, char * dev_model)
-{
-	if (test_that_cd()) {
-		enum return_type results;
-		umount(IMAGE_LOCATION);
-		results = ask_yes_no("That CDROM disc does not seem to be a " DISTRIB_NAME " Installation CDROM.\nRetry with another disc?");
-		if (results == RETURN_OK)
-			return try_with_device(dev_name, dev_model);
-		return results;
-	}
-
-	log_message("found a " DISTRIB_NAME " CDROM, good news!");
-
-	if (IS_SPECIAL_STAGE2 || ramdisk_possible())
-		load_ramdisk(); /* we don't care about return code, we'll do it live if we failed */
-
-	if (IS_RESCUE)
-		umount(IMAGE_LOCATION);
-
-	method_name = strdup("cdrom");
-	return RETURN_OK;
-}		
-
-static enum return_type try_with_device(char * dev_name, char * dev_model)
-{
-	wait_message("Trying to access a CDROM disc (drive %s)", dev_model);
-
-	if (mount_that_cd_device(dev_name) == -1) {
-		enum return_type results;
-		char msg[500];
-		unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
-		remove_wait_message();
-
-		snprintf(msg, sizeof(msg), "I can't access a " DISTRIB_NAME " Installation disc in your CDROM drive (%s).\nRetry?", dev_model);
-		results = ask_yes_no(msg);
-		if (results == RETURN_OK)
-			return try_with_device(dev_name, dev_model);
-		return results;
-	}	
-	remove_wait_message();
-
-	return do_with_device(dev_name, dev_model);
-}
-
-enum return_type cdrom_prepare(void)
-{
-	char ** medias, ** ptr, ** medias_models;
-	char * choice;
-	int i, count = 0;
-	enum return_type results;
-
-	my_insmod("ide-cd", ANY_DRIVER_TYPE, NULL);
-	my_insmod("sr_mod", ANY_DRIVER_TYPE, NULL);
-	
-	get_medias(CDROM, &medias, &medias_models);
-
-	ptr = medias;
-	while (ptr && *ptr) {
-		count++;
-		ptr++;
-	}
-
-	if (count == 0) {
-		stg1_error_message("No CDROM device found.");
-		i = ask_insmod(SCSI_ADAPTERS);
-		if (i == RETURN_BACK)
-			return RETURN_BACK;
-		return cdrom_prepare();
-	}
-
-	if (count == 1) {
-		results = try_with_device(*medias, *medias_models);
-		if (results == RETURN_OK)
-			return RETURN_OK;
-		i = ask_insmod(SCSI_ADAPTERS);
-		if (i == RETURN_BACK)
-			return RETURN_BACK;
-		return cdrom_prepare();
-	}
-
-	if (IS_AUTOMATIC) {
-		char ** model = medias_models;
-		ptr = medias;
-		while (ptr && *ptr) {
-			wait_message("Trying to access " DISTRIB_NAME " CDROM disc (drive %s)", *model);
-			if (mount_that_cd_device(*ptr) != -1) {
-				if (!test_that_cd()) {
-					remove_wait_message();
-					return do_with_device(*ptr, *model);
-				}
-				else
-					umount(IMAGE_LOCATION);
-			}
-			remove_wait_message();
-			ptr++;
-			model++;
-		}
-		unset_param(MODE_AUTOMATIC);
-		return cdrom_prepare();
-	}
-	else {
-		results = ask_from_list_comments("Please choose the CDROM drive to use for the installation.", medias, medias_models, &choice);
-		if (results == RETURN_OK) {
-			char ** model = medias_models;
-			ptr = medias;
-			while (ptr && *ptr && model && *model) {
-				if (!strcmp(*ptr, choice))
-					break;
-				ptr++;
-				model++;
-			}
-			results = try_with_device(choice, *model);
-		} else
-			return results;
-	}
-
-	if (results == RETURN_OK)
-		return RETURN_OK;
-	if (results == RETURN_BACK)
-		return cdrom_prepare();
-
-	i = ask_insmod(SCSI_ADAPTERS);
-	if (i == RETURN_BACK)
-		return RETURN_BACK;
-	return cdrom_prepare();
-}
diff --git a/mdk-stage1/cdrom.h b/mdk-stage1/cdrom.h
deleted file mode 100644
index 639487eed..000000000
--- a/mdk-stage1/cdrom.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _CDROM_H_
-#define _CDROM_H_
-
-#include "stage1.h"
-
-enum return_type cdrom_prepare(void);
-
-#endif
diff --git a/mdk-stage1/config-stage1.h b/mdk-stage1/config-stage1.h
deleted file mode 100644
index 3af38a446..000000000
--- a/mdk-stage1/config-stage1.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _CONFIG_STAGE1_H_
-#define _CONFIG_STAGE1_H_
-
-#define _GNU_SOURCE 1
-
-
-/* If we have more than that amount of memory (in Mbytes), we assume we can load the second stage as a ramdisk */
-#define MEM_LIMIT_RAMDISK 52
-
-/* If we have more than that amount of memory (in Mbytes), we assume we can load the rescue as a ramdisk */
-#define MEM_LIMIT_RESCUE 40
-
-#define DISTRIB_NAME "Mandrake Linux"
-
-#define RAMDISK_COMPRESSION_RATIO 1.95
-
-#define LIVE_LOCATION    "/Mandrake/mdkinst/"
-#define RAMDISK_LOCATION "/Mandrake/base/"
-#define IMAGE_LOCATION   "/tmp/image"
-#define STAGE2_LOCATION  "/tmp/stage2"
-
-/* user-definable (in Makefile): DISABLE_NETWORK, DISABLE_DISK, DISABLE_CDROM, DISABLE_PCMCIA */
-
-
-/* some factorizing for disabling more features */
-
-#ifdef DISABLE_DISK
-#ifdef DISABLE_CDROM
-#define DISABLE_MEDIAS
-#endif
-#endif
-
-
-#endif
diff --git a/mdk-stage1/dhcp.c b/mdk-stage1/dhcp.c
deleted file mode 100644
index 32c7a932b..000000000
--- a/mdk-stage1/dhcp.c
+++ /dev/null
@@ -1,679 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-/*
- * Portions from GRUB  --  GRand Unified Bootloader
- * Copyright (C) 2000  Free Software Foundation, Inc.
- */
-
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/socket.h>
-#include <sys/ioctl.h>
-#include <net/if.h>
-#include <arpa/inet.h>
-#include <net/route.h>
-#include <errno.h>
-#include <net/ethernet.h>
-#include <netinet/ip.h>
-#include <netinet/udp.h>
-#include <sys/time.h>
-#include <time.h>
-#include <fcntl.h>
-#include <sys/poll.h>
-
-#include "stage1.h"
-#include "log.h"
-#include "network.h"
-#include "frontend.h"
-#include "automatic.h"
-
-#include "dhcp.h"
-
-
-typedef int bp_int32;
-typedef short bp_int16;
-
-#define BOOTP_OPTION_NETMASK		1
-#define BOOTP_OPTION_GATEWAY		3
-#define BOOTP_OPTION_DNS		6
-#define BOOTP_OPTION_HOSTNAME		12
-#define BOOTP_OPTION_DOMAIN		15
-#define BOOTP_OPTION_BROADCAST		28
-
-#define DHCP_OPTION_REQADDR		50
-#define DHCP_OPTION_LEASE		51
-#define DHCP_OPTION_TYPE		53
-#define DHCP_OPTION_SERVER		54
-#define DHCP_OPTION_OPTIONREQ		55
-#define DHCP_OPTION_MAXSIZE		57
-
-#define DHCP_OPTION_CLIENT_IDENTIFIER	61
-
-#define BOOTP_CLIENT_PORT	68
-#define BOOTP_SERVER_PORT	67
-
-#define BOOTP_OPCODE_REQUEST	1
-#define BOOTP_OPCODE_REPLY	2
-
-#define DHCP_TYPE_DISCOVER	1
-#define DHCP_TYPE_OFFER		2
-#define DHCP_TYPE_REQUEST	3
-#define DHCP_TYPE_ACK		5
-#define DHCP_TYPE_RELEASE	7
-
-#define BOOTP_VENDOR_LENGTH	64
-#define DHCP_VENDOR_LENGTH	340
-
-struct bootp_request {
-	char opcode;
-	char hw;
-	char hwlength;
-	char hopcount;
-	bp_int32 id;
-	bp_int16 secs;
-	bp_int16 flags;
-	bp_int32 ciaddr, yiaddr, server_ip, bootp_gw_ip;
-	char hwaddr[16];
-	char servername[64];
-	char bootfile[128];
-	char vendor[DHCP_VENDOR_LENGTH];
-} ;
-
-static const char vendor_cookie[] = { 99, 130, 83, 99, 255 };
-
-
-static unsigned int verify_checksum(void * buf2, int length2)
-{
-	unsigned int csum = 0;
-	unsigned short * sp;
-
-	for (sp = (unsigned short *) buf2; length2 > 0; (length2 -= 2), sp++)
-		csum += *sp;
-	
-	while (csum >> 16)
-		csum = (csum & 0xffff) + (csum >> 16);
-
-	return (csum == 0xffff);
-}
-
-
-static int initial_setup_interface(char * device, int s) {
-	struct sockaddr_in * addrp;
-	struct ifreq req;
-	struct rtentry route;
-	int true = 1;
-	
-	addrp = (struct sockaddr_in *) &req.ifr_addr;
-	
-	strcpy(req.ifr_name, device);
-	addrp->sin_family = AF_INET;
-	addrp->sin_port = 0;
-	memset(&addrp->sin_addr, 0, sizeof(addrp->sin_addr));
-	
-	req.ifr_flags = 0; /* take it down */
-	if (ioctl(s, SIOCSIFFLAGS, &req)) {
-		log_perror("SIOCSIFFLAGS (downing)");
-		return -1;
-	}
-    
-	addrp->sin_family = AF_INET;
-	addrp->sin_addr.s_addr = htonl(0);
-	if (ioctl(s, SIOCSIFADDR, &req)) {
-		log_perror("SIOCSIFADDR");
-		return -1;
-	}
-
-	req.ifr_flags = IFF_UP | IFF_BROADCAST | IFF_RUNNING;
-	if (ioctl(s, SIOCSIFFLAGS, &req)) {
-		log_perror("SIOCSIFFLAGS (upping)");
-		return -1;
-	}
-
-	memset(&route, 0, sizeof(route));
-	memcpy(&route.rt_gateway, addrp, sizeof(*addrp));
-	
-	addrp->sin_family = AF_INET;
-	addrp->sin_port = 0;
-	addrp->sin_addr.s_addr = INADDR_ANY;
-	memcpy(&route.rt_dst, addrp, sizeof(*addrp));
-	memcpy(&route.rt_genmask, addrp, sizeof(*addrp));
-	
-	route.rt_dev = device;
-	route.rt_flags = RTF_UP;
-	route.rt_metric = 0;
-	
-	if (ioctl(s, SIOCADDRT, &route)) {
-		if (errno != EEXIST) {
-			close(s);
-			log_perror("SIOCADDRT");
-			return -1;
-		}
-	}
-	
-	if (setsockopt(s, SOL_SOCKET, SO_BROADCAST, &true, sizeof(true))) {
-		close(s);
-		log_perror("setsockopt");
-		return -1;
-	}
-
-	/* I need to sleep a bit in order for kernel to finish init of the
-           network device; this would allow to not send further multiple
-           dhcp requests when only one is needed. */
-	wait_message("Bringing up networking...");
-	sleep(2);
-	remove_wait_message();
-
-	return 0;
-}
-
-
-void set_missing_ip_info(struct interface_info * intf)
-{
-	bp_int32 ipNum = *((bp_int32 *) &intf->ip);
-	bp_int32 nmNum;
-
-	if (intf->netmask.s_addr == 0)
-		inet_aton(guess_netmask(inet_ntoa(intf->ip)), &intf->netmask);
-
-	nmNum = *((bp_int32 *) &intf->netmask);
-
-	if (intf->broadcast.s_addr == 0)
-		*((bp_int32 *) &intf->broadcast) = (ipNum & nmNum) | ~(nmNum);
-
-	if (intf->network.s_addr == 0)
-		*((bp_int32 *) &intf->network) = ipNum & nmNum;
-}
-
-static void parse_reply(struct bootp_request * breq, struct interface_info * intf)
-{
-	unsigned char * chptr;
-	unsigned char option, length;
-
-	if (breq->bootfile && strlen(breq->bootfile) > 0)
-		stage2_kickstart = strdup(breq->bootfile);
-	
-	memcpy(&intf->ip, &breq->yiaddr, 4);
-
-	chptr = breq->vendor;
-	chptr += 4;
-	while (*chptr != 0xFF && (void *) chptr < (void *) breq->vendor + DHCP_VENDOR_LENGTH) {
-		char tmp_str[500];
-		option = *chptr++;
-		if (!option)
-			continue;
-		length = *chptr++;
-
-		switch (option) {
-		case BOOTP_OPTION_DNS:
-			memcpy(&dns_server, chptr, sizeof(dns_server));
-			log_message("got dns %s", inet_ntoa(dns_server));
-			if (length >= sizeof(dns_server)*2) {
-				memcpy(&dns_server2, chptr+sizeof(dns_server), sizeof(dns_server2));
-				log_message("got dns2 %s", inet_ntoa(dns_server2));
-			}
-			break;
-
-		case BOOTP_OPTION_NETMASK:
-			memcpy(&intf->netmask, chptr, sizeof(intf->netmask));
-			log_message("got netmask %s", inet_ntoa(intf->netmask));
-			break;
-		    
-		case BOOTP_OPTION_DOMAIN:
-			memcpy(tmp_str, chptr, length);
-			tmp_str[length] = '\0';
-			domain = strdup(tmp_str);
-			log_message("got domain %s", domain);
-			break;
-
-		case BOOTP_OPTION_BROADCAST:
-			memcpy(&intf->broadcast, chptr, sizeof(intf->broadcast));
-			log_message("got broadcast %s", inet_ntoa(intf->broadcast));
-			break;
-
-		case BOOTP_OPTION_GATEWAY:
-			memcpy(&gateway, chptr, sizeof(gateway));
-			log_message("got gateway %s", inet_ntoa(gateway));
-			break;
-
-		case BOOTP_OPTION_HOSTNAME:
-			memcpy(tmp_str, chptr, length);
-			tmp_str[length] = '\0';
-			hostname = strdup(tmp_str);
-			log_message("got hostname %s", hostname);
-			break;
-
-		}
-
-		chptr += length;
-	}
-
-	set_missing_ip_info(intf);
-}
-
-
-static void init_vendor_codes(struct bootp_request * breq) {
-	memcpy(breq->vendor, vendor_cookie, sizeof(vendor_cookie));
-}
-
-static char gen_hwaddr[16];
-
-static int prepare_request(struct bootp_request * breq, int sock, char * device)
-{
-	struct ifreq req;
-	
-	memset(breq, 0, sizeof(*breq));
-	
-	breq->opcode = BOOTP_OPCODE_REQUEST;
-	
-	strcpy(req.ifr_name, device);
-	if (ioctl(sock, SIOCGIFHWADDR, &req)) {
-		log_perror("SIOCSIFHWADDR");
-		return -1;
-	}
-	
-	breq->hw = 1; 		/* ethernet */
-	breq->hwlength = IFHWADDRLEN;	
-	memcpy(breq->hwaddr, req.ifr_hwaddr.sa_data, IFHWADDRLEN);
-	memcpy(gen_hwaddr, req.ifr_hwaddr.sa_data, IFHWADDRLEN);
-	
-	breq->hopcount = 0;
-	
-	init_vendor_codes(breq);
-	
-	return 0;
-}
-
-static int get_vendor_code(struct bootp_request * bresp, unsigned char option, void * data)
-{
-	unsigned char * chptr;
-	unsigned int length, theOption;
-	
-	chptr = bresp->vendor + 4;
-	while (*chptr != 0xFF && *chptr != option) {
-		theOption = *chptr++;
-		if (!theOption)
-			continue;
-		length = *chptr++;
-		chptr += length;
-	}
-	
-	if (*chptr++ == 0xff)
-		return 1;
-	
-	length = *chptr++;
-	memcpy(data, chptr, length);
-	
-	return 0;
-}
-
-
-static unsigned long currticks(void)
-{
-	struct timeval tv;
-	unsigned long csecs;
-	unsigned long ticks_per_csec, ticks_per_usec;
-	
-	/* Note: 18.2 ticks/sec.  */
-	
-	gettimeofday (&tv, 0);
-	csecs = tv.tv_sec / 10;
-	ticks_per_csec = csecs * 182;
-	ticks_per_usec = (((tv.tv_sec - csecs * 10) * 1000000 + tv.tv_usec) * 182 / 10000000);
-	return ticks_per_csec + ticks_per_usec;
-}
-
-
-#define BACKOFF_LIMIT 7
-#define	TICKS_PER_SEC 18
-#define MAX_ARP_RETRIES	4
-
-static void rfc951_sleep(int exp)
-{
-	static long seed = 0;
-	long q;
-	unsigned long tmo;
-	
-	if (exp > BACKOFF_LIMIT)
-		exp = BACKOFF_LIMIT;
-	
-	if (!seed)
-		/* Initialize linear congruential generator.  */
-		seed = (currticks () + *(long *) &gen_hwaddr + ((short *) gen_hwaddr)[2]);
-  
-	/* Simplified version of the LCG given in Bruce Scheier's
-	   "Applied Cryptography".  */
-	q = seed / 53668;
-	if ((seed = 40014 * (seed - 53668 * q) - 12211 * q) < 0)
-		seed += 2147483563l;
-	
-	/* Compute mask.  */
-	for (tmo = 63; tmo <= 60 * TICKS_PER_SEC && --exp > 0; tmo = 2 * tmo + 1)
-		;
-  
-	/* Sleep.  */
-	log_message("<sleep>");
-	
-	for (tmo = (tmo & seed) + currticks (); currticks () < tmo;);
-}
-
-
-static int handle_transaction(int s, struct bootp_request * breq, struct bootp_request * bresp,
-			      struct sockaddr_in * server_addr, int dhcp_type)
-{
-	struct pollfd polls;
-	int i, j;
-	int retry = 1;
-	int sin;
-	char eth_packet[ETH_FRAME_LEN];
-	struct iphdr * ip_hdr;
-	struct udphdr * udp_hdr;
-	unsigned char type;
-	unsigned long starttime;
-	int timeout = 1;
-
-	breq->id = starttime = currticks();
-	breq->secs = 0;
-
-	sin = socket(AF_PACKET, SOCK_DGRAM, ntohs(ETH_P_IP));
-	if (sin < 0) {
-		log_perror("af_packet socket");
-		return -1;
-	}
-
-	while (retry <= MAX_ARP_RETRIES) {
-		i = sizeof(*breq);
-
-		if (sendto(s, breq, i, 0, (struct sockaddr *) server_addr, sizeof(*server_addr)) != i) {
-			close(s);
-			log_perror("sendto");
-			return -1;
-		}
-		
-		polls.fd = sin;
-		polls.events = POLLIN;
-
-		while (poll(&polls, 1, timeout*1000) == 1) {
-
-			if ((j = recv(sin, eth_packet, sizeof(eth_packet), 0)) == -1) {
-				log_perror("recv");
-				continue;
-			}
-			
-			/* We need to do some basic sanity checking of the header */
-			if (j < (signed)(sizeof(*ip_hdr) + sizeof(*udp_hdr)))
-				continue;
-			
-			ip_hdr = (void *) eth_packet;
-			if (!verify_checksum(ip_hdr, sizeof(*ip_hdr)))
-				continue;
-
-			if (ntohs(ip_hdr->tot_len) > j)
-				continue;
-
-			j = ntohs(ip_hdr->tot_len);
-			
-			if (ip_hdr->protocol != IPPROTO_UDP)
-				continue;
-			
-			udp_hdr = (void *) (eth_packet + sizeof(*ip_hdr));
-
-			if (ntohs(udp_hdr->source) != BOOTP_SERVER_PORT)
-				continue;
-			
-			if (ntohs(udp_hdr->dest) != BOOTP_CLIENT_PORT)
-				continue;
-			/* Go on with this packet; it looks sane */
-			
-			/* Originally copied sizeof (*bresp) - this is a security
-			   problem due to a potential underflow of the source
-			   buffer.  Also, it trusted that the packet was properly
-			   0xFF terminated, which is not true in the case of the
-			   DHCP server on Cisco 800 series ISDN router. */
-			
-			memset (bresp, 0xFF, sizeof (*bresp));
-			memcpy (bresp, (char *) udp_hdr + sizeof (*udp_hdr), j - sizeof (*ip_hdr) - sizeof (*udp_hdr));
-			
-			/* sanity checks */
-			if (bresp->id != breq->id)
-				continue;
-			if (bresp->opcode != BOOTP_OPCODE_REPLY)
-				continue;
-			if (bresp->hwlength != breq->hwlength)
-				continue;
-			if (memcmp(bresp->hwaddr, breq->hwaddr, bresp->hwlength))
-				continue;
-			if (get_vendor_code(bresp, DHCP_OPTION_TYPE, &type) || type != dhcp_type)
-				continue;
-			if (memcmp(bresp->vendor, vendor_cookie, 4))
-				continue;
-			return 0;
-		}
-		rfc951_sleep(retry);
-		breq->secs = htons ((currticks () - starttime) / 20);
-		retry++;
-		timeout *= 2;
-		if (timeout > 5)
-			timeout = 5;
-	}
-	
-	return -1;
-}
-
-static void add_vendor_code(struct bootp_request * breq, unsigned char option, unsigned char length, void * data)
-{
-	unsigned char * chptr;
-	int theOption, theLength;
-
-	chptr = breq->vendor;
-	chptr += 4;
-	while (*chptr != 0xFF && *chptr != option) {
-		theOption = *chptr++;
-		if (!theOption) continue;
-		theLength = *chptr++;
-		chptr += theLength;
-	}
-
-	*chptr++ = option;
-	*chptr++ = length;
-	memcpy(chptr, data, length);
-	chptr[length] = 0xff;
-}
-
-
-char * dhcp_hostname = NULL;
-char * dhcp_domain = NULL;
-
-enum return_type perform_dhcp(struct interface_info * intf)
-{
-	int s, i;
-	struct sockaddr_in server_addr;
-	struct sockaddr_in client_addr;
-	struct sockaddr_in broadcast_addr;
-	struct bootp_request breq, bresp;
-	unsigned char messageType;
-	unsigned int lease;
-	short aShort;
-	int num_options;
-	char requested_options[50];
-	char * client_id_str, * client_id_hwaddr;
-
-	if (strncmp(intf->device, "eth", 3)) {
-		stg1_error_message("DHCP available only for Ethernet networking.");
-		return RETURN_ERROR;
-	}
-
-	s = socket(AF_INET, SOCK_DGRAM, 0);
-	if (s < 0) {
-		log_perror("socket");
-		return RETURN_ERROR;
-	}
-
-	{
-		enum return_type results;
-		char * questions[] = { "Host name", "Domain name", NULL };
-		char * questions_auto[] = { "hostname", "domain" };
-		static char ** answers = NULL;
-		char * boulet;
-
-		client_id_str = client_id_hwaddr = NULL;
-		
-		results = ask_from_entries_auto("If the DHCP server needs to know you by name; please fill in this information. "
-						"Valid answers are for example: `mybox' for hostname and `mynetwork.com' for "
-						"domain name, for a machine called `mybox.mynetwork.com' on the Internet.",
-						questions, &answers, 32, questions_auto, NULL);
-		if (results == RETURN_OK)
-		{
-			dhcp_hostname = answers[0];
-			if ((boulet = strchr(dhcp_hostname, '.')) != NULL)
-				boulet[0] = '\0';
-			dhcp_domain = answers[1];
-			
-			if (*dhcp_hostname && *dhcp_domain) {
-				/* if we have both, then create client id from them */
-				client_id_str = malloc(1 + strlen(dhcp_hostname) + 1 + strlen(dhcp_domain) + 1);
-				client_id_str[0] = '\0';
-				sprintf(client_id_str+1, "%s.%s", dhcp_hostname, dhcp_domain);
-			}
-		}
-	}
-
-	if (initial_setup_interface(intf->device, s) != 0) {
-		close(s);
-		return RETURN_ERROR;
-	}
-
-	if (prepare_request(&breq, s, intf->device) != 0) {
-		close(s);
-		return RETURN_ERROR;
-	}
-
-	messageType = DHCP_TYPE_DISCOVER;
-	add_vendor_code(&breq, DHCP_OPTION_TYPE, 1, &messageType);
-
-	/* add pieces needed to have DDNS/DHCP IP selection based on requested name */
-	if (dhcp_hostname && *dhcp_hostname) { /* pick client id form based on absence or presence of domain name */
-		if (*dhcp_domain) /* alternate style <hostname>.<domainname> */
-			add_vendor_code(&breq, DHCP_OPTION_CLIENT_IDENTIFIER, strlen(client_id_str+1)+1, client_id_str);
-		else { /* usual style (aka windows / dhcpcd) */
-			/* but put MAC in form required for client identifier first */
-			client_id_hwaddr = malloc(IFHWADDRLEN+2);
-			client_id_hwaddr[0] = 1;  /* set flag for ethernet */
-			memcpy(client_id_hwaddr+1, gen_hwaddr, IFHWADDRLEN);
-			add_vendor_code(&breq, DHCP_OPTION_CLIENT_IDENTIFIER, IFHWADDRLEN+1, client_id_hwaddr);
-		}
-		/* this is the one that the dhcp server really wants for DDNS updates */
-		add_vendor_code(&breq, BOOTP_OPTION_HOSTNAME, strlen(dhcp_hostname), dhcp_hostname);
-		log_message("DHCP: telling server to use name = %s", dhcp_hostname);
-	}
-
-	memset(&client_addr.sin_addr, 0, sizeof(&client_addr.sin_addr));
-	client_addr.sin_family = AF_INET;
-	client_addr.sin_port = htons(BOOTP_CLIENT_PORT);	/* bootp client */
-
-	if (bind(s, (struct sockaddr *) &client_addr, sizeof(client_addr))) {
-		log_perror("bind");
-		return RETURN_ERROR;
-	}
-
-	broadcast_addr.sin_family = AF_INET;
-	broadcast_addr.sin_port = htons(BOOTP_SERVER_PORT);	/* bootp server */
-	memset(&broadcast_addr.sin_addr, 0xff, sizeof(broadcast_addr.sin_addr));  /* broadcast */
-
-	log_message("DHCP: sending DISCOVER");
-
-	wait_message("Sending DHCP request...");
-	i = handle_transaction(s, &breq, &bresp, &broadcast_addr, DHCP_TYPE_OFFER);
-	remove_wait_message();
-
-	if (i != 0) {
-		stg1_error_message("No DHCP reply received.");
-		close(s);
-		return RETURN_ERROR;
-	}
-
-	server_addr.sin_family = AF_INET;
-	server_addr.sin_port = htons(BOOTP_SERVER_PORT);	/* bootp server */
-	if (get_vendor_code(&bresp, DHCP_OPTION_SERVER, &server_addr.sin_addr)) {
-		close(s);
-		log_message("DHCPOFFER didn't include server address");
-		return RETURN_ERROR;
-	}
-
-	init_vendor_codes(&breq);
-	messageType = DHCP_TYPE_REQUEST;
-	add_vendor_code(&breq, DHCP_OPTION_TYPE, 1, &messageType);
-	add_vendor_code(&breq, DHCP_OPTION_SERVER, 4, &server_addr.sin_addr);
-	add_vendor_code(&breq, DHCP_OPTION_REQADDR, 4, &bresp.yiaddr);
-
-	/* if used the first time, then have to use it again */
-	if (dhcp_hostname && *dhcp_hostname) { /* add pieces needed to have DDNS/DHCP IP selection based on requested name */
-		if (dhcp_domain && *dhcp_domain) /* alternate style */
-			add_vendor_code(&breq, DHCP_OPTION_CLIENT_IDENTIFIER, strlen(client_id_str+1)+1, client_id_str);
-		else /* usual style (aka windows / dhcpcd) */
-			add_vendor_code(&breq, DHCP_OPTION_CLIENT_IDENTIFIER, IFHWADDRLEN+1, client_id_hwaddr);
-		/* this is the one that the dhcp server really wants for DDNS updates */
-		add_vendor_code(&breq, BOOTP_OPTION_HOSTNAME, strlen(dhcp_hostname), dhcp_hostname);
-	}
-
-	aShort = ntohs(sizeof(struct bootp_request));
-	add_vendor_code(&breq, DHCP_OPTION_MAXSIZE, 2, &aShort);
-
-	num_options = 0;
-	requested_options[num_options++] = BOOTP_OPTION_NETMASK;
-	requested_options[num_options++] = BOOTP_OPTION_GATEWAY;
-	requested_options[num_options++] = BOOTP_OPTION_DNS;
-	requested_options[num_options++] = BOOTP_OPTION_DOMAIN;
-	requested_options[num_options++] = BOOTP_OPTION_BROADCAST;
-	add_vendor_code(&breq, DHCP_OPTION_OPTIONREQ, num_options, requested_options);
-
-	/* request a lease of 1 hour */
-	i = htonl(60 * 60);
-	add_vendor_code(&breq, DHCP_OPTION_LEASE, 4, &i);
-
-	log_message("DHCP: sending REQUEST");
-
-	i = handle_transaction(s, &breq, &bresp, &broadcast_addr, DHCP_TYPE_ACK);
-
-	if (i != 0) {
-		close(s);
-		return RETURN_ERROR;
-	}
-
-	if (get_vendor_code(&bresp, DHCP_OPTION_LEASE, &lease)) {
-		log_message("failed to get lease time\n");
-		return RETURN_ERROR;
-	}
-	lease = ntohl(lease);
-
-	close(s);
-
-	intf->netmask.s_addr = 0;
-	intf->broadcast.s_addr = 0;
-	intf->network.s_addr = 0;
-
-	parse_reply(&bresp, intf);
-
-	return RETURN_OK;
-}
diff --git a/mdk-stage1/dhcp.h b/mdk-stage1/dhcp.h
deleted file mode 100644
index 71d062e9c..000000000
--- a/mdk-stage1/dhcp.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * View the homepage: http://us.mandrakesoft.com/~gc/html/stage1.html
- *
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- *  Portions from GRUB  --  GRand Unified Bootloader
- *  Copyright (C) 2000  Free Software Foundation, Inc.
- *
- *  Itself based on etherboot-4.6.4 by Martin Renters.
- *
- */
-
-#ifndef _DHCP_H_
-#define _DHCP_H_
-
-#include "stage1.h"
-#include "network.h"
-
-enum return_type perform_dhcp(struct interface_info * intf);
-
-extern char * dhcp_hostname;
-
-#endif
diff --git a/mdk-stage1/dietlibc/.cvsignore b/mdk-stage1/dietlibc/.cvsignore
deleted file mode 100644
index 7c88cb004..000000000
--- a/mdk-stage1/dietlibc/.cvsignore
+++ /dev/null
@@ -1,12 +0,0 @@
-t
-elftrunc
-mapfile
-t1
-load
-compile
-bin-alpha
-bin-arm
-bin-i386
-bin-mips
-bin-ppc
-bin-sparc
diff --git a/mdk-stage1/dietlibc/AUTHOR b/mdk-stage1/dietlibc/AUTHOR
deleted file mode 100644
index 6d8ab1a05..000000000
--- a/mdk-stage1/dietlibc/AUTHOR
+++ /dev/null
@@ -1 +0,0 @@
-Felix von Leitner <felix-dietlibc@fefe.de>
diff --git a/mdk-stage1/dietlibc/Makefile b/mdk-stage1/dietlibc/Makefile
deleted file mode 100644
index b6e7b2783..000000000
--- a/mdk-stage1/dietlibc/Makefile
+++ /dev/null
@@ -1,146 +0,0 @@
-ARCH=$(shell uname -m | sed 's/i[4-9]86/i386/')
-
-OBJDIR=bin-$(ARCH)
-
-all: $(OBJDIR) $(OBJDIR)/start.o $(OBJDIR)/dietlibc.a $(OBJDIR)/liblatin1.a $(OBJDIR)/librpc.a $(OBJDIR)/diet
-
-CFLAGS=-pipe
-CROSS=
-
-VPATH=lib:libstdio:libugly:libcruft:libcrypt:libshell:liblatin1:librpc:libregex:syscalls.c
-
-SYSCALLOBJ=$(patsubst syscalls.s/%.S,$(OBJDIR)/%.o,$(wildcard syscalls.s/*.S))
-
-LIBOBJ=$(patsubst lib/%.c,$(OBJDIR)/%.o,$(wildcard lib/*.c))
-LIBUGLYOBJ=$(patsubst libugly/%.c,$(OBJDIR)/%.o,$(wildcard libugly/*.c))
-LIBSTDIOOBJ=$(patsubst libstdio/%.c,$(OBJDIR)/%.o,$(wildcard libstdio/*.c))
-LIBCRUFTOBJ=$(patsubst libcruft/%.c,$(OBJDIR)/%.o,$(wildcard libcruft/*.c))
-LIBCRYPTOBJ=$(patsubst libcrypt/%.c,$(OBJDIR)/%.o,$(wildcard libcrypt/*.c))
-LIBSHELLOBJ=$(patsubst libshell/%.c,$(OBJDIR)/%.o,$(wildcard libshell/*.c))
-
-LIBRPCOBJ=$(patsubst librpc/%.c,$(OBJDIR)/%.o,$(wildcard librpc/*.c))
-LIBREGEXOBJ=$(patsubst libregex/%.c,$(OBJDIR)/%.o,$(wildcard libregex/*.c))
-
-include $(ARCH)/Makefile.add
-
-ifeq ($(CFLAGS),-pipe)
-CFLAGS+=-O -fomit-frame-pointer
-endif
-
-ifneq ($(DEBUG),)
-CFLAGS = -g
-COMMENT = :
-endif
-CFLAGS += -Wall -Wno-switch
-
-PWD=$(shell pwd)
-
-.SUFFIXES:
-.SUFFIXES: .S .c
-
-$(OBJDIR):
-	mkdir $@
-
-% :: %,v
-
-$(OBJDIR)/%.o: %.S
-	$(CROSS)$(CC) -I. -Iinclude $(CFLAGS) -c $< -o $@
-
-$(OBJDIR)/%.o: %.c
-	$(CROSS)$(CC) -I. -Iinclude $(CFLAGS) -c $< -o $@
-	$(COMMENT) $(CROSS)strip -x -R .comment -R .note $@
-
-DIETLIBC_OBJ = $(SYSCALLOBJ) $(LIBOBJ) $(LIBSTDIOOBJ) $(LIBUGLYOBJ) \
-$(LIBCRUFTOBJ) $(LIBCRYPTOBJ) $(LIBSHELLOBJ) $(LIBREGEXOBJ) \
-$(OBJDIR)/__longjmp.o $(OBJDIR)/setjmp.o $(OBJDIR)/unified.o \
-$(OBJDIR)/mmap.o $(OBJDIR)/clone.o
-
-$(OBJDIR)/dietlibc.a: $(DIETLIBC_OBJ) $(OBJDIR)/start.o
-	$(CROSS)ar cru $@ $(DIETLIBC_OBJ)
-
-$(OBJDIR)/librpc.a: $(LIBRPCOBJ)
-	$(CROSS)ar cru $@ $(LIBRPCOBJ)
-
-LIBLATIN1_OBJS=$(patsubst liblatin1/%.c,$(OBJDIR)/%.o,$(wildcard liblatin1/*.c))
-$(OBJDIR)/liblatin1.a: $(LIBLATIN1_OBJS)
-	$(CROSS)ar cru $@ $^
-
-$(OBJDIR)/libdietc.so: $(OBJDIR)/dietlibc.a
-	$(CROSS)ld -whole-archive -shared -o $@ $^
-
-$(SYSCALLOBJ): syscalls.h
-
-$(OBJDIR)/diet: diet.c $(OBJDIR)/start.o $(OBJDIR)/dietlibc.a
-	$(CROSS)$(CC) -Iinclude $(CFLAGS) -nostdlib -o $@ $^ -DDIETHOME=\"$(PWD)\"
-	$(CROSS)strip -R .comment -R .note $@
-
-$(OBJDIR)/djb: $(OBJDIR)/compile $(OBJDIR)/load
-
-$(OBJDIR)/compile:
-	echo 'exec gcc $(CFLAGS) -I$(PWD)/$(OBJDIR)/include -c $${1+"$$@"}' > $@
-	chmod 755 $@
-
-$(OBJDIR)/load:
-	echo 'main="$$1"; shift; exec gcc -nostdlib -o "$$main" $(PWD)/$(OBJDIR)/start.o "$$main".o $${1+"$$@"} $(PWD)/$(OBJDIR)/dietlibc.a -lgcc'  > $@
-	chmod 755 $@
-
-clean:
-	rm -f *.o *.a t t1 compile load exports mapfile libdietc.so
-	rm -rf bin-*
-
-tar: clean
-	rm -f armv4l
-	ln -sf arm armv4l
-	cd ..; tar cvvf dietlibc.tar.bz2 dietlibc --use=bzip2 --exclude CVS
-
-$(OBJDIR)/exports: $(OBJDIR)/dietlibc.a
-	nm -g $(OBJDIR)/dietlibc.a | grep -w T | awk '{ print $$3 }' | sort -u > $(OBJDIR)/exports
-
-.PHONY: t t1
-t:
-	$(CROSS)$(CC) -g $(CFLAGS) -fno-builtin -nostdlib -Iinclude -o t t.c $(OBJDIR)/start.o $(OBJDIR)/dietlibc.a -lgcc -Wl,-Map,mapfile
-
-t1:
-	$(CROSS)$(CC) -g -o t1 t.c
-
-install: $(OBJDIR)/start.o $(OBJDIR)/dietlibc.a $(OBJDIR)/liblatin1.a $(OBJDIR)/diet
-	cp $(OBJDIR)/start.o $(INSTALLPREFIX)$(prefix)/lib/dietstart.o
-	cp $(OBJDIR)/dietlibc.a $(INSTALLPREFIX)$(prefix)/lib/libdietc.a
-	cp $(OBJDIR)/liblatin1.a $(INSTALLPREFIX)$(prefix)/lib/libdietlatin1.a
-	cp $(OBJDIR)/diet $(INSTALLPREFIX)$(prefix)/bin/diet
-
-.PHONY: sparc ppc mips arm alpha i386
-
-arm sparc ppc alpha i386:
-	$(MAKE) ARCH=$@ CROSS=$@-linux- all t bin-$@/libdietc.so
-
-mips:
-	$(MAKE) ARCH=$@ CROSS=$@-linux-gnu- all t bin-$@/libdietc.so
-
-cross:
-	$(MAKE) arm sparc ppc alpha i386 mips
-
-
-# these depend on dietfeatures.h for large file backward compatibility
-$(OBJDIR)/__fstat64.o $(OBJDIR)/__lstat64.o $(OBJDIR)/__stat64.o: dietfeatures.h
-
-# these depend on dietfeatures.h for thread support
-$(OBJDIR)/alloc.o $(OBJDIR)/perror.o $(OBJDIR)/logging.o $(OBJDIR)/unified.o: dietfeatures.h
-
-# these depend on dietfeatures.h for linker warnings
-$(OBJDIR)/assert_fail.o $(OBJDIR)/sprintf.o $(OBJDIR)/vsnprintf.o $(OBJDIR)/___div.o $(OBJDIR)/fflush.o $(OBJDIR)/setvbuf.o $(OBJDIR)/system.o $(OBJDIR)/sendfile.o $(OBJDIR)/setenv.o: dietfeatures.h
-
-# these depend on dietfeatures.h for buffered stdio
-fclose.o $(OBJDIR)/fdglue.o $(OBJDIR)/fflush.o $(OBJDIR)/fgetc.o $(OBJDIR)/fputc.o $(OBJDIR)/fread.o $(OBJDIR)/fseek.o $(OBJDIR)/printf.o $(OBJDIR)/setvbuf.o $(OBJDIR)/stderr.o $(OBJDIR)/stdin.o $(OBJDIR)/stdout.o $(OBJDIR)/fwrite.o $(OBJDIR)/puts.o: dietfeatures.h
-
-# these depend on dietfeatures.h for fast string routines
-strcasecmp.o $(OBJDIR)/strcat.o $(OBJDIR)/strchr.o $(OBJDIR)/strcmp.o $(OBJDIR)/strcpy.o $(OBJDIR)/strlen.o $(OBJDIR)/strncasecmp.o $(OBJDIR)/strncat.o $(OBJDIR)/strrchr.o: dietfeatures.h
-
-# these depend on dietfeatures.h for /proc
-$(OBJDIR)/tty.o: dietfeatures.h
-
-# these depend on dietfeatures.h for ungetc support ;-)
-$(OBJDIR)/ungetc.o: dietfeatures.h
-
-# these depend on dietfeatures.h for WANT_TZFILE_PARSER
-$(OBJDIR)/localtime_r.o: dietfeatures.h
diff --git a/mdk-stage1/dietlibc/README b/mdk-stage1/dietlibc/README
deleted file mode 100644
index ce9838832..000000000
--- a/mdk-stage1/dietlibc/README
+++ /dev/null
@@ -1,43 +0,0 @@
-diet libc to statically link programs that don't need all the bloat
-from glibc.
-
-malloc, printf and scanf contributed from Olaf Dreesen.
-
-To compile:
-
-	$ make
-
-make should compile the diet libc itself without warnings.  In addition
-to the diet libc, the default make target includes t, which is a test
-program and probably contains code which produces warnings.  You can
-safely ignore them.
-
-When make is done, it will have created dietlibc.a in bin-i386 (or
-bin-ppc, bin-alpha, bin-sparc, bin-ppc or bin-arm, depending on your
-architecture).  In that directory you will also find a program called
-"diet", which you need to copy in a directory in your $PATH:
-
-	# install bin-i386/diet /usr/local/bin
-
-Then you can compile programs by prepending diet to the command line,
-i.e.
-
-	$ diet gcc -s -Os -pipe -o t t.c
-
-diet is cross-compiler friendly and can also be used like this:
-
-	$ diet sparc-linux-gcc -o t t.c
-
-diet will then link against dietlibc.a from bin-sparc, of course.
-diet comes with a man page (diet.1), which you can copy to an
-appropriate location, too:
-
-	# cp diet.1 /usr/local/man/man1
-
-After you compiled the diet libc successfully, I invite you to check out
-the embedded utils (http://www.fefe.de/embutils/) and the diet libc
-binary repository (ftp://foobar.math.fu-berlin.de/pub/dietlibc/), too.
-The embedded utils are small replacements for common utilities like mv,
-chown, ls, and even a small tar that can extract tar files.  The binary
-repository contains a few utilities I linked against the diet libc, for
-example gzip, bzip2 and fdisk.
diff --git a/mdk-stage1/dietlibc/alpha/Makefile.add b/mdk-stage1/dietlibc/alpha/Makefile.add
deleted file mode 100644
index 10ff0faef..000000000
--- a/mdk-stage1/dietlibc/alpha/Makefile.add
+++ /dev/null
@@ -1,5 +0,0 @@
-
-CFLAGS+=-Os -Iinclude -fomit-frame-pointer -fstrict-aliasing
-VPATH:=alpha:syscalls.s:$(VPATH)
-
-LIBOBJ+=$(patsubst %,$(OBJDIR)/%,divq.o divl.o remq.o reml.o seteuid.o __time.o)
diff --git a/mdk-stage1/dietlibc/alpha/__longjmp.S b/mdk-stage1/dietlibc/alpha/__longjmp.S
deleted file mode 100644
index d86d76717..000000000
--- a/mdk-stage1/dietlibc/alpha/__longjmp.S
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifdef __alpha__
-
-#include <setjmp.h>
-
-.text
-.align 2
-
-.global __longjmp
-__longjmp:
-	mov	$17, $0 	/* a1 -> v0 */
-
-	ldq	 $9, (JB_S0*8) ($16)	/* s0 */
-	ldq	$10, (JB_S1*8) ($16)	/* s1 */
-	ldq	$11, (JB_S2*8) ($16)	/* s2 */
-	ldq	$12, (JB_S3*8) ($16)	/* s3 */
-	ldq	$13, (JB_S4*8) ($16)	/* s4 */
-	ldq	$14, (JB_S5*8) ($16)	/* s5 */
-
-	ldq	$26, (JB_PC*8) ($16)	/* ra */
-	ldq	$fp, (JB_FP*8) ($16)	/* fp */
-	ldq	 $1, (JB_SP*8) ($16)	/* sp */
-
-	ldt	$f2, (JB_F2*8) ($16)	/* f2 */
-	ldt	$f3, (JB_F3*8) ($16)	/* f3 */
-	ldt	$f4, (JB_F4*8) ($16)	/* f4 */
-	ldt	$f5, (JB_F5*8) ($16)	/* f5 */
-	ldt	$f6, (JB_F6*8) ($16)	/* f6 */
-	ldt	$f7, (JB_F7*8) ($16)	/* f7 */
-	ldt	$f8, (JB_F8*8) ($16)	/* f8 */
-	ldt	$f9, (JB_F9*8) ($16)	/* f9 */
-
-	cmoveq	 $0, 0x1, $0
-	mov	 $1, $sp
-
-	ret	$31, ($26), 1
-
-
-#endif
diff --git a/mdk-stage1/dietlibc/alpha/__time.c b/mdk-stage1/dietlibc/alpha/__time.c
deleted file mode 100644
index 07275e0e3..000000000
--- a/mdk-stage1/dietlibc/alpha/__time.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <time.h>
-#include <sys/time.h>
-
-time_t time(time_t *foo) {
-  struct timeval tv;
-  time_t tmp=(time_t)-1;
-  if (gettimeofday(&tv,0)==0)
-    tmp=(time_t)tv.tv_sec;
-  if (foo) *foo=tmp;
-  return tmp;
-}
diff --git a/mdk-stage1/dietlibc/alpha/accept.S b/mdk-stage1/dietlibc/alpha/accept.S
deleted file mode 100644
index 459c45d7a..000000000
--- a/mdk-stage1/dietlibc/alpha/accept.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(accept,accept,__libc_accept)
diff --git a/mdk-stage1/dietlibc/alpha/bind.S b/mdk-stage1/dietlibc/alpha/bind.S
deleted file mode 100644
index 86a04cb70..000000000
--- a/mdk-stage1/dietlibc/alpha/bind.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(bind,bind)
diff --git a/mdk-stage1/dietlibc/alpha/clone.S b/mdk-stage1/dietlibc/alpha/clone.S
deleted file mode 100644
index b7e32d707..000000000
--- a/mdk-stage1/dietlibc/alpha/clone.S
+++ /dev/null
@@ -1,42 +0,0 @@
-#include "syscalls.h"
-#include <asm/errno.h>
-
-.text
-.align 2
-.weak clone
-clone:
-.global __clone
-.type __clone,@function
-__clone:
-	ldiq	$0, EINVAL
-	beq	$16, .Lerror
-	beq	$17, .Lerror
-
-	subq	$17, 16, $17
-	stq	$16, 0($17)
-	stq	$19, 8($17)
-	mov	$18, $16
-
-	lda	$0, __NR_clone($31)
-	callsys
-	bne	$19, .Lerror
-
-	beq	$0, .Lstart_thread
-
-	ret	$31, ($26), 0x01
-
-.Lerror:
-	jmp	error_unified_syscall
-
-.Lstart_thread:
-	clr	$fp
-
-	ldq	$27, 0($sp)
-	ldq	$16, 8($sp)
-
-	jsr	$26, ($27), 0x04
-
-	ldgp	$gp, 0($26)
-	mov	$0,  $16
-	jsr	$26, exit
-
diff --git a/mdk-stage1/dietlibc/alpha/connect.S b/mdk-stage1/dietlibc/alpha/connect.S
deleted file mode 100644
index c191ca808..000000000
--- a/mdk-stage1/dietlibc/alpha/connect.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(connect,connect,__libc_connect)
diff --git a/mdk-stage1/dietlibc/alpha/divl.S b/mdk-stage1/dietlibc/alpha/divl.S
deleted file mode 100644
index 3af22a5e8..000000000
--- a/mdk-stage1/dietlibc/alpha/divl.S
+++ /dev/null
@@ -1,101 +0,0 @@
-/* taken from glibc 2.2 */
-
-	.set noreorder
-	.set noat
-
-	.ent __divlu
-	.globl __divlu
-
-	.align 3
-__divlu :
-	lda	$30 , - 48 ($30 )
-	.frame	$30 , 48 , $23  , 0
-	.prologue 0
-.Ludiv:
-	stq	$1 , 0($30 )
-	zapnot  $25   ,15,  $1
-	stq	$2 , 8($30 )
-	zapnot  $24   ,15,  $2
-	stq	$0 , 16($30 )
-	clr	$27
-	stq	$3  , 24($30 )
-	ldiq	$0  , 1
-	 stq $4   ,32($30 )
-	beq	$1  , .Ldivbyzero
-
-	.align 3
-
-
-1:	cmpult	$1  , $2  , $at
-	s8addq	$1  , $31 , $1
-	s8addq	$0  , $31 , $0
-	bne	$at  , 1b
-
-
-
-3:	 addq $27    ,$0  , $4
-	srl	$0  , 1, $0
-	cmpule	$1  , $2  , $at
-	subq	$2  , $1  , $3
-	 cmovne $at   ,$4  , $27
-	srl	$1  , 1, $1
-	cmovne	$at  , $3  , $2
-	bne	$0  , 3b
-
-.Ldone:	ldq	$1 , 0($30 )
-	ldq	$2 , 8($30 )
-	ldq	$0 , 16($30 )
-	ldq	$3  , 24($30 )
-	 ldq $4   ,32($30 )
-	lda	$30 , 48 ($30 )
-	ret	$31 , ($23  ), 1
-
-.Ldivbyzero:
-	mov	$16 , $3
-	ldiq	$16 , -2
-	call_pal 170
-	mov	$3  , $16
-	clr	$27
-	br	.Ldone
-
-	.end __divlu
-
-	.ent __divl
-	.globl __divl
-
-	.align 3
-__divl :
-	lda	$30 , - 48 ($30 )
-	.frame	$30 , 48 , $23  , 0
-	.prologue 0
-	or	$24  , $25  , $at
-	sextl  $at  , $at
-	bge	$at , .Ludiv
-
-
-	stq	$24  , 0($30 )
-	negl  $24   ,  $at
-	stq	$25  , 8($30 )
-	cmovge	$at , $at , $24
-	stq	$23  , 16($30 )
-	negl  $25   ,  $at
-	stq	$3  , 24($30 )
-	cmovge	$at , $at , $25
-
-
-	bsr	$23  , __divlu
-
-
-	ldq	$24  , 0($30 )
-	ldq	$25  , 8($30 )
-	xor $24  , $25  ,  $at
-	negl  $27   ,  $3
-	sextl  $at  , $at
-	ldq	$23  , 16($30 )
-	cmovlt	$at , $3  , $27
-	ldq	$3  , 24($30 )
-
-	lda	$30 , 48 ($30 )
-	ret	$31 , ($23  ), 1
-
-	.end	__divl
diff --git a/mdk-stage1/dietlibc/alpha/divq.S b/mdk-stage1/dietlibc/alpha/divq.S
deleted file mode 100644
index cf70862c4..000000000
--- a/mdk-stage1/dietlibc/alpha/divq.S
+++ /dev/null
@@ -1,102 +0,0 @@
-/* taken from glibc 2.2 */
-
-        .set noreorder
-        .set noat
-
-        .ent __divqu
-        .globl __divqu
-
-        .align 3
-__divqu :
-        lda     $30 , - 48 ($30 )
-        .frame  $30 , 48 , $23  , 0
-        .prologue 0
-$udiv:
-        stq     $1 , 0($30 )
-        mov  $25   ,  $1
-        stq     $2 , 8($30 )
-        mov  $24   ,  $2
-        stq     $0 , 16($30 )
-        clr     $27
-        stq     $3  , 24($30 )
-        ldiq    $0  , 1
-         stq $4   ,32($30 )
-        beq     $1  , $divbyzero
-
-        .align 3
-
-
-1:      cmpult  $1  , $2  , $at
-        blt     $1  , 2f
-        addq    $1  , $1  , $1
-        addq    $0  , $0  , $0
-        bne     $at  , 1b
-        unop
-2:
-3:       addq $27    ,$0  , $4
-        srl     $0  , 1, $0
-        cmpule  $1  , $2  , $at
-        subq    $2  , $1  , $3
-         cmovne $at   ,$4  , $27
-        srl     $1  , 1, $1
-        cmovne  $at  , $3  , $2
-        bne     $0  , 3b
-
-$done:  ldq     $1 , 0($30 )
-        ldq     $2 , 8($30 )
-        ldq     $0 , 16($30 )
-        ldq     $3  , 24($30 )
-         ldq $4   ,32($30 )
-        lda     $30 , 48 ($30 )
-        ret     $31 , ($23  ), 1
-
-$divbyzero:
-        mov     $16 , $3
-        ldiq    $16 , -2
-        call_pal 170
-        mov     $3  , $16
-        clr     $27
-        br      $done
-
-        .end __divqu
-
-        .ent __divq
-        .globl __divq
-
-        .align 3
-__divq :
-        lda     $30 , - 48 ($30 )
-        .frame  $30 , 48 , $23  , 0
-        .prologue 0
-        or      $24  , $25  , $at
-
-        bge     $at , $udiv
-
-
-        stq     $24  , 0($30 )
-        negq  $24   ,  $at
-        stq     $25  , 8($30 )
-        cmovge  $at , $at , $24
-        stq     $23  , 16($30 )
-        negq  $25   ,  $at
-        stq     $3  , 24($30 )
-        cmovge  $at , $at , $25
-
-
-        bsr     $23  , __divqu
-
-
-        ldq     $24  , 0($30 )
-        ldq     $25  , 8($30 )
-        xor $24  , $25  ,  $at
-        negq  $27   ,  $3
-
-        ldq     $23  , 16($30 )
-        cmovlt  $at , $3  , $27
-        ldq     $3  , 24($30 )
-
-        lda     $30 , 48 ($30 )
-        ret     $31 , ($23  ), 1
-
-        .end    __divq
-
diff --git a/mdk-stage1/dietlibc/alpha/getegid.S b/mdk-stage1/dietlibc/alpha/getegid.S
deleted file mode 100644
index 89c35d45e..000000000
--- a/mdk-stage1/dietlibc/alpha/getegid.S
+++ /dev/null
@@ -1,11 +0,0 @@
-.text
-.align 2
-.global getegid
-getegid:
-	lda	$sp,-8($sp)
-	stq	$26, 0($sp)
-	jsr	getgid
-	ldq	$26, 0($sp)
-	lda	$sp, 8($sp)
-	cmovge	$0, $20, $0
-	ret
diff --git a/mdk-stage1/dietlibc/alpha/geteuid.S b/mdk-stage1/dietlibc/alpha/geteuid.S
deleted file mode 100644
index 087ca7348..000000000
--- a/mdk-stage1/dietlibc/alpha/geteuid.S
+++ /dev/null
@@ -1,11 +0,0 @@
-.text
-.align 2
-.global geteuid
-geteuid:
-	lda	$sp,-8($sp)
-	stq	$26, 0($sp)
-	jsr	getuid
-	ldq	$26, 0($sp)
-	lda	$sp, 8($sp)
-	cmovge	$0, $20, $0
-	ret
diff --git a/mdk-stage1/dietlibc/alpha/getgid.S b/mdk-stage1/dietlibc/alpha/getgid.S
deleted file mode 100644
index 7350082f3..000000000
--- a/mdk-stage1/dietlibc/alpha/getgid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getxgid,getgid)
diff --git a/mdk-stage1/dietlibc/alpha/getpeername.S b/mdk-stage1/dietlibc/alpha/getpeername.S
deleted file mode 100644
index 3b3f48b1a..000000000
--- a/mdk-stage1/dietlibc/alpha/getpeername.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getpeername,getpeername)
diff --git a/mdk-stage1/dietlibc/alpha/getpid.S b/mdk-stage1/dietlibc/alpha/getpid.S
deleted file mode 100644
index d8b3523b2..000000000
--- a/mdk-stage1/dietlibc/alpha/getpid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getxpid,getpid)
diff --git a/mdk-stage1/dietlibc/alpha/getppid.S b/mdk-stage1/dietlibc/alpha/getppid.S
deleted file mode 100644
index e181268c3..000000000
--- a/mdk-stage1/dietlibc/alpha/getppid.S
+++ /dev/null
@@ -1,11 +0,0 @@
-.text
-.align 2
-.global getppid
-getppid:
-	lda	$sp,-8($sp)
-	stq	$26, 0($sp)
-	jsr	getpid
-	ldq	$26, 0($sp)
-	lda	$sp, 8($sp)
-	cmovge	$0, $20, $0
-	ret
diff --git a/mdk-stage1/dietlibc/alpha/getsockname.S b/mdk-stage1/dietlibc/alpha/getsockname.S
deleted file mode 100644
index 2727d88da..000000000
--- a/mdk-stage1/dietlibc/alpha/getsockname.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getsockname,getsockname)
diff --git a/mdk-stage1/dietlibc/alpha/getsockopt.S b/mdk-stage1/dietlibc/alpha/getsockopt.S
deleted file mode 100644
index 44b4a910a..000000000
--- a/mdk-stage1/dietlibc/alpha/getsockopt.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getsockopt,getsockopt)
diff --git a/mdk-stage1/dietlibc/alpha/getuid.S b/mdk-stage1/dietlibc/alpha/getuid.S
deleted file mode 100644
index fcb5570c2..000000000
--- a/mdk-stage1/dietlibc/alpha/getuid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getxuid,getuid)
diff --git a/mdk-stage1/dietlibc/alpha/listen.S b/mdk-stage1/dietlibc/alpha/listen.S
deleted file mode 100644
index 1102831d4..000000000
--- a/mdk-stage1/dietlibc/alpha/listen.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(listen,listen)
diff --git a/mdk-stage1/dietlibc/alpha/mmap.S b/mdk-stage1/dietlibc/alpha/mmap.S
deleted file mode 100644
index 2e57fbb74..000000000
--- a/mdk-stage1/dietlibc/alpha/mmap.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(mmap,mmap)
diff --git a/mdk-stage1/dietlibc/alpha/msgctl.S b/mdk-stage1/dietlibc/alpha/msgctl.S
deleted file mode 100644
index d7caed2cc..000000000
--- a/mdk-stage1/dietlibc/alpha/msgctl.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(msgctl,msgctl)
diff --git a/mdk-stage1/dietlibc/alpha/msgget.S b/mdk-stage1/dietlibc/alpha/msgget.S
deleted file mode 100644
index 518d67ac4..000000000
--- a/mdk-stage1/dietlibc/alpha/msgget.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(msgget,msgget)
diff --git a/mdk-stage1/dietlibc/alpha/msgrcv.S b/mdk-stage1/dietlibc/alpha/msgrcv.S
deleted file mode 100644
index ab62e6c30..000000000
--- a/mdk-stage1/dietlibc/alpha/msgrcv.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(msgrcv,msgrcv)
diff --git a/mdk-stage1/dietlibc/alpha/msgsnd.S b/mdk-stage1/dietlibc/alpha/msgsnd.S
deleted file mode 100644
index 890a996a2..000000000
--- a/mdk-stage1/dietlibc/alpha/msgsnd.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(msgsnd,msgsnd)
diff --git a/mdk-stage1/dietlibc/alpha/pipe.S b/mdk-stage1/dietlibc/alpha/pipe.S
deleted file mode 100644
index 3dfef10bf..000000000
--- a/mdk-stage1/dietlibc/alpha/pipe.S
+++ /dev/null
@@ -1,17 +0,0 @@
-#include "syscalls.h"
-
-.text
-.align 2
-.global pipe
-.type pipe,@function
-pipe:
-        lda     $0, __NR_pipe($31)
-        callsys
-        bne     $19, .Lerror
-        stl     $0,  0($16)
-        stl     $20, 4($16)
-        clr     $0
-        ret     $31, ($26), 0x01
-.Lerror:
-        br      error_unified_syscall
-
diff --git a/mdk-stage1/dietlibc/alpha/recv.S b/mdk-stage1/dietlibc/alpha/recv.S
deleted file mode 100644
index 17664f2e2..000000000
--- a/mdk-stage1/dietlibc/alpha/recv.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(recv,recv,__libc_recv)
diff --git a/mdk-stage1/dietlibc/alpha/recvfrom.S b/mdk-stage1/dietlibc/alpha/recvfrom.S
deleted file mode 100644
index d8e3922af..000000000
--- a/mdk-stage1/dietlibc/alpha/recvfrom.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(recvfrom,recvfrom,__libc_recvfrom)
diff --git a/mdk-stage1/dietlibc/alpha/recvmsg.S b/mdk-stage1/dietlibc/alpha/recvmsg.S
deleted file mode 100644
index 6ce87eebb..000000000
--- a/mdk-stage1/dietlibc/alpha/recvmsg.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(recvmsg,recvmsg)
diff --git a/mdk-stage1/dietlibc/alpha/reml.S b/mdk-stage1/dietlibc/alpha/reml.S
deleted file mode 100644
index 2d89e3280..000000000
--- a/mdk-stage1/dietlibc/alpha/reml.S
+++ /dev/null
@@ -1,101 +0,0 @@
-/* taken from glibc 2.2 */
-
-	.set noreorder
-	.set noat
-
-	.ent __remlu
-	.globl __remlu
-
-	.align 3
-__remlu :
-	lda	$30 , -32($30)
-	.frame	$30 , 32 , $23  , 0
-	.prologue 0
-.Ludiv:
-	stq	$1  , 0($30)
-	zapnot	$25 , 15 , $1
-	stq	$2  , 8($30)
-	zapnot  $24 , 15 , $27
-	stq	$0  , 16($30)
-	clr	$2
-	stq	$3  , 24($30)
-	ldiq	$0  , 1
-
-	beq	$1  , .Ldivbyzero
-
-	.align 3
-
-
-1:	cmpult	$1  , $27 , $at
-	s8addq	$1  , $31 , $1
-	s8addq	$0  , $31 , $0
-	bne	$at , 1b
-
-
-
-3:
-	srl	$0  , 1 , $0
-	cmpule	$1  , $27 , $at
-	subq	$27 , $1 , $3
-
-	srl	$1  , 1  , $1
-	cmovne	$at , $3  , $27
-	bne	$0  , 3b
-
-.Ldone:	ldq	$1 , 0($30)
-	ldq	$2 , 8($30)
-	ldq	$0 , 16($30)
-	ldq	$3 , 24($30)
-
-	lda	$30 , 32($30)
-	ret	$31 , ($23), 1
-
-.Ldivbyzero:
-	mov	$16 , $3
-	ldiq	$16 , -2
-	call_pal 170
-	mov	$3  , $16
-	clr	$27
-	br	.Ldone
-
-	.end __remlu
-
-	.ent __reml
-	.globl __reml
-
-	.align 3
-__reml :
-	lda	$30 , - 32 ($30 )
-	.frame	$30 , 32 , $23  , 0
-	.prologue 0
-	or	$24 , $25  , $at
-	sextl	$at , $at
-	bge	$at , .Ludiv
-
-
-	stq	$24 , 0($30 )
-	negl	$24 ,  $at
-	stq	$25 , 8($30 )
-	cmovge	$at , $at , $24
-	stq	$23 , 16($30 )
-	negl	$25 ,  $at
-	stq	$3  , 24($30 )
-	cmovge	$at , $at , $25
-
-
-	bsr	$23 , __remlu
-
-
-	ldq	$24 , 0($30 )
-	ldq	$25 , 8($30 )
-	mov	$24 ,  $at
-	negl	$27 ,  $3
-	sextl	$at , $at
-	ldq	$23 , 16($30 )
-	cmovlt	$at , $3  , $27
-	ldq	$3  , 24($30 )
-
-	lda	$30 , 32 ($30 )
-	ret	$31 , ($23  ), 1
-
-	.end	__reml
diff --git a/mdk-stage1/dietlibc/alpha/remq.S b/mdk-stage1/dietlibc/alpha/remq.S
deleted file mode 100644
index 713484da3..000000000
--- a/mdk-stage1/dietlibc/alpha/remq.S
+++ /dev/null
@@ -1,97 +0,0 @@
-/* taken from glibc 2.2 */
-
-	.set noreorder
-	.set noat
-
-	.ent __remqu
-	.globl __remqu
-
-	.align 3
-__remqu :
-	lda	$30 , - 32 ($30 )
-	.frame	$30 , 32 , $23  , 0
-	.prologue 0
-.Ludiv:
-	stq	$1  , 0($30 )
-	mov	$25 ,  $1
-	stq	$2  , 8($30 )
-	mov	$24 ,  $27
-	stq	$0  , 16($30 )
-	clr	$2
-	stq	$3  , 24($30 )
-	ldiq	$0  , 1
-
-	beq	$1  , .Ldivbyzero
-
-	.align 3
-
-1:	cmpult	$1  , $27   , $at
-	blt	$1  , 2f
-	addq	$1  , $1  , $1
-	addq	$0  , $0  , $0
-	bne	$at , 1b
-	unop
-2:
-3:
-	srl	$0  , 1, $0
-	cmpule	$1  , $27   , $at
-	subq	$27 , $1  , $3
-
-	srl	$1  , 1, $1
-	cmovne	$at , $3  , $27
-	bne	$0  , 3b
-
-.Ldone:	ldq	$1  , 0($30 )
-	ldq	$2  , 8($30 )
-	ldq	$0  , 16($30 )
-	ldq	$3  , 24($30 )
-
-	lda	$30 , 32 ($30 )
-	ret	$31 , ($23  ), 1
-
-.Ldivbyzero:
-	mov	$16 , $3
-	ldiq	$16 , -2
-	call_pal 170
-	mov	$3  , $16
-	clr	$27
-	br	.Ldone
-
-	.end __remqu
-
-	.ent __remq
-	.globl __remq
-
-	.align 3
-__remq :
-	lda	$30 , - 32 ($30 )
-	.frame	$30 , 32 , $23  , 0
-	.prologue 0
-	or	$24  , $25  , $at
-
-	bge	$at , .Ludiv
-
-	stq	$24 , 0($30 )
-	negq	$24 , $at
-	stq	$25 , 8($30 )
-	cmovge	$at , $at , $24
-	stq	$23 , 16($30 )
-	negq	$25 , $at
-	stq	$3  , 24($30 )
-	cmovge	$at , $at , $25
-
-	bsr	$23 , __remqu
-
-	ldq	$24 , 0($30 )
-	ldq	$25 , 8($30 )
-	mov	$24 ,  $at
-	negq	$27 ,  $3
-
-	ldq	$23 , 16($30 )
-	cmovlt	$at , $3  , $27
-	ldq	$3  , 24($30 )
-
-	lda	$30 , 32 ($30 )
-	ret	$31 , ($23  ), 1
-
-	.end	__remq
diff --git a/mdk-stage1/dietlibc/alpha/semctl.S b/mdk-stage1/dietlibc/alpha/semctl.S
deleted file mode 100644
index e215ed955..000000000
--- a/mdk-stage1/dietlibc/alpha/semctl.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(semctl,semctl)
diff --git a/mdk-stage1/dietlibc/alpha/semget.S b/mdk-stage1/dietlibc/alpha/semget.S
deleted file mode 100644
index 67f488546..000000000
--- a/mdk-stage1/dietlibc/alpha/semget.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(semget,semget)
diff --git a/mdk-stage1/dietlibc/alpha/semop.S b/mdk-stage1/dietlibc/alpha/semop.S
deleted file mode 100644
index 81b6fc606..000000000
--- a/mdk-stage1/dietlibc/alpha/semop.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(semop,semop)
diff --git a/mdk-stage1/dietlibc/alpha/send.S b/mdk-stage1/dietlibc/alpha/send.S
deleted file mode 100644
index cfd11be2a..000000000
--- a/mdk-stage1/dietlibc/alpha/send.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(send,send,__libc_send)
diff --git a/mdk-stage1/dietlibc/alpha/sendmsg.S b/mdk-stage1/dietlibc/alpha/sendmsg.S
deleted file mode 100644
index 14646ad68..000000000
--- a/mdk-stage1/dietlibc/alpha/sendmsg.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sendmsg,sendmsg)
diff --git a/mdk-stage1/dietlibc/alpha/sendto.S b/mdk-stage1/dietlibc/alpha/sendto.S
deleted file mode 100644
index 17a033011..000000000
--- a/mdk-stage1/dietlibc/alpha/sendto.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(sendto,sendto,__libc_sendto)
diff --git a/mdk-stage1/dietlibc/alpha/seteuid.c b/mdk-stage1/dietlibc/alpha/seteuid.c
deleted file mode 100644
index a7cf47893..000000000
--- a/mdk-stage1/dietlibc/alpha/seteuid.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <sys/types.h>
-#include <unistd.h>
-
-#undef seteuid
-int seteuid(uid_t euid) {
-  return setreuid(-1,euid);
-}
diff --git a/mdk-stage1/dietlibc/alpha/setjmp.S b/mdk-stage1/dietlibc/alpha/setjmp.S
deleted file mode 100644
index 3768056be..000000000
--- a/mdk-stage1/dietlibc/alpha/setjmp.S
+++ /dev/null
@@ -1,46 +0,0 @@
-#include <setjmp.h>
-
-.text
-.global __sigsetjmp
-__sigsetjmp:
-	ldgp	$gp,  0($gp)
-
-	mov	$sp, $1
-	lda	$sp, -16($sp)
-
-	stq	$26, 0($sp)	/* save ra */
-
-	stq	 $9, (JB_S0*8) ($16)	/* s0 */
-	stq	$10, (JB_S1*8) ($16)	/* s1 */
-	stq	$11, (JB_S2*8) ($16)	/* s2 */
-	stq	$12, (JB_S3*8) ($16)	/* s3 */
-	stq	$13, (JB_S4*8) ($16)	/* s4 */
-	stq	$14, (JB_S5*8) ($16)	/* s5 */
-
-	stq	$26, (JB_PC*8) ($16)	/* ra */
-	stq	$fp, (JB_FP*8) ($16)	/* fp */
-	stq	 $1, (JB_SP*8) ($16)	/* sp */
-
-	stt	$f2, (JB_F2*8) ($16)	/* f2 */
-	stt	$f3, (JB_F3*8) ($16)	/* f3 */
-	stt	$f4, (JB_F4*8) ($16)	/* f4 */
-	stt	$f5, (JB_F5*8) ($16)	/* f5 */
-	stt	$f6, (JB_F6*8) ($16)	/* f6 */
-	stt	$f7, (JB_F7*8) ($16)	/* f7 */
-	stt	$f8, (JB_F8*8) ($16)	/* f8 */
-	stt	$f9, (JB_F9*8) ($16)	/* f9 */
-
-	br	$26, __sigjmp_save	/* call __sigjmp_save */
-
-	ldq	$26, 0($sp)	/* restore ra */
-
-	lda	$sp, 16($sp)
-	ret	$31, ($26), 1	/* back to caller */
-
-.weak setjmp
-setjmp:
-.weak __setjmp
-__setjmp:
-	ldgp	$gp,  0($gp)
-	mov	0, $17
-	br	__sigsetjmp
diff --git a/mdk-stage1/dietlibc/alpha/setsockopt.S b/mdk-stage1/dietlibc/alpha/setsockopt.S
deleted file mode 100644
index e3fe1d321..000000000
--- a/mdk-stage1/dietlibc/alpha/setsockopt.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setsockopt,setsockopt)
diff --git a/mdk-stage1/dietlibc/alpha/shmat.S b/mdk-stage1/dietlibc/alpha/shmat.S
deleted file mode 100644
index 51248173d..000000000
--- a/mdk-stage1/dietlibc/alpha/shmat.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(shmat,shmat)
diff --git a/mdk-stage1/dietlibc/alpha/shmctl.S b/mdk-stage1/dietlibc/alpha/shmctl.S
deleted file mode 100644
index d56caace4..000000000
--- a/mdk-stage1/dietlibc/alpha/shmctl.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(shmctl,shmctl)
diff --git a/mdk-stage1/dietlibc/alpha/shmdt.S b/mdk-stage1/dietlibc/alpha/shmdt.S
deleted file mode 100644
index d9812a799..000000000
--- a/mdk-stage1/dietlibc/alpha/shmdt.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(shmdt,shmdt)
diff --git a/mdk-stage1/dietlibc/alpha/shmget.S b/mdk-stage1/dietlibc/alpha/shmget.S
deleted file mode 100644
index 82914223f..000000000
--- a/mdk-stage1/dietlibc/alpha/shmget.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(shmget,shmget)
diff --git a/mdk-stage1/dietlibc/alpha/shutdown.S b/mdk-stage1/dietlibc/alpha/shutdown.S
deleted file mode 100644
index 9b5139325..000000000
--- a/mdk-stage1/dietlibc/alpha/shutdown.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(shutdown,shutdown)
diff --git a/mdk-stage1/dietlibc/alpha/signal.S b/mdk-stage1/dietlibc/alpha/signal.S
deleted file mode 100644
index ceca0f02d..000000000
--- a/mdk-stage1/dietlibc/alpha/signal.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(osf_signal,signal)
diff --git a/mdk-stage1/dietlibc/alpha/sigprocmask.S b/mdk-stage1/dietlibc/alpha/sigprocmask.S
deleted file mode 100644
index d9da836c2..000000000
--- a/mdk-stage1/dietlibc/alpha/sigprocmask.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(osf_sigprocmask,sigprocmask,__sigprocmask)
diff --git a/mdk-stage1/dietlibc/alpha/socket.S b/mdk-stage1/dietlibc/alpha/socket.S
deleted file mode 100644
index 85401f56e..000000000
--- a/mdk-stage1/dietlibc/alpha/socket.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(socket,socket)
diff --git a/mdk-stage1/dietlibc/alpha/socketcall.S b/mdk-stage1/dietlibc/alpha/socketcall.S
deleted file mode 100644
index b150bd5d5..000000000
--- a/mdk-stage1/dietlibc/alpha/socketcall.S
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-
-/*
- * Doesn't exist on alpha ( accept, bind, ... are SYSCALLS !?! )
- */
diff --git a/mdk-stage1/dietlibc/alpha/start.S b/mdk-stage1/dietlibc/alpha/start.S
deleted file mode 100644
index 00b8e950d..000000000
--- a/mdk-stage1/dietlibc/alpha/start.S
+++ /dev/null
@@ -1,35 +0,0 @@
-#include "start.h"
-
-#ifdef __alpha__
-
-.text
-.align 2
-	.set noreorder
-
-.global __start
-__start:
-.global _start
-_start:
-	clr	$fp		/* clear frame pointer */
-
-	br	$gp,.Lstart	/* set global pointer */
-.Lstart:
-	ldgp	$gp, 0($gp)
-
-/* prepare to call main */
-	ldl	$16, 0($sp)	/* argc */
-
-	lda	$17, 8($sp)	/* argv */
-
-	addq	$16,   1, $18	/* argp */
-	s8addq	$18, $17, $18	/* (8*(argc+1))+argv -> argp  */
-
-	stq	$18, environ
-
-	mov	 $0, $21	/* mov v0(dynload) to a5 */
-
-	jsr	$26, main
-	mov	 $0, $16
-	jsr	$26, exit	/* YES, CALL! for threads and atexit ! (+4 byte) */
-
-#endif
diff --git a/mdk-stage1/dietlibc/alpha/strlen.c b/mdk-stage1/dietlibc/alpha/strlen.c
deleted file mode 100644
index ac532254a..000000000
--- a/mdk-stage1/dietlibc/alpha/strlen.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#include <string.h>
-
-static const unsigned long long magic = 0x0101010101010101LL;
-
-size_t strlen(const char *s)
-{
-  const char *t = s;
-  unsigned long long word;
-
-  if (!s) return 0;
-
-  /* Byte compare up until 64 bit word boundary */
-  for (; ((unsigned long long) t & 7); t++)
-    if (!*t) return t - s;
-
-  /* Word compare */
-  do {
-    word = *((unsigned long long *) t); t += 8;
-    word = (word - magic) &~ word;
-    word &= (magic << 7);
-  } while (word == 0);
-
-  /* word & 0x8080808080808080 == word */
-  word = (word - 1) & (magic << 8);
-  word += (word << 32);
-  word += (word << 16);
-  word += (word << 8);
-  t += word >> 56;
-  return ((const char *) t) - 8 - s;
-}
-
-
diff --git a/mdk-stage1/dietlibc/alpha/time.S b/mdk-stage1/dietlibc/alpha/time.S
deleted file mode 100644
index e69de29bb..000000000
--- a/mdk-stage1/dietlibc/alpha/time.S
+++ /dev/null
diff --git a/mdk-stage1/dietlibc/alpha/unified.S b/mdk-stage1/dietlibc/alpha/unified.S
deleted file mode 100644
index 02a1c9bcd..000000000
--- a/mdk-stage1/dietlibc/alpha/unified.S
+++ /dev/null
@@ -1,29 +0,0 @@
-#include <dietfeatures.h>
-
-.global __unified_syscall
-__unified_syscall:
-	callsys
-	bne	$19, .Lerror
-	ret	$31, ($26), 0x01
-
-.Lerror:
-.global error_unified_syscall
-error_unified_syscall:
-#ifdef WANT_THREAD_SAVE
-	lda	$sp, -16($sp)	/* alloc 2 qwords on stack */
-	stq	$26, 0($sp)	/* save ra to stack */
-	stq	$0,  8($sp)	/* save v0 to stack */
-
-	jsr	$26, __errno_location	/* call __errno_location */
-
-	ldq	$1,  8($sp)	/* write old v0 to errno */
-	stl	$1,  0($0)
-
-	lda	$0,  -1($31)	/* new return value is -1 */
-	ldq	$26, 0($sp)	/* restore return address */
-	lda	$sp, 16($sp)	/* free 2 qwords on stack */
-#else
-	lda	$1,  errno
-	stl	$0,  0($1)
-#endif
-	ret	$31, ($26), 0x01  /* return */
diff --git a/mdk-stage1/dietlibc/alpha/utime.S b/mdk-stage1/dietlibc/alpha/utime.S
deleted file mode 100644
index a9a8aada6..000000000
--- a/mdk-stage1/dietlibc/alpha/utime.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(utimes,utime)
diff --git a/mdk-stage1/dietlibc/alpha/waitpid.S b/mdk-stage1/dietlibc/alpha/waitpid.S
deleted file mode 100644
index 6dc1c99db..000000000
--- a/mdk-stage1/dietlibc/alpha/waitpid.S
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <syscalls.h>
-
-.text
-.align 2
-.weak waitpid
-waitpid:
-.global __libc_waitpid
-__libc_waitpid:
-	clr	$19
-	br	wait4
diff --git a/mdk-stage1/dietlibc/diet.c b/mdk-stage1/dietlibc/diet.c
deleted file mode 100644
index 1de6befc8..000000000
--- a/mdk-stage1/dietlibc/diet.c
+++ /dev/null
@@ -1,112 +0,0 @@
-#include <string.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-/* goal:
- *   when invoked as
- * "diet gcc -c t.c"
- *   exec
- * "gcc -I/path/to/dietlibc/include -c t.c"
- *
- *   when invoked as
- * "diet sparc-linux-gcc -o t t.o"
- *   exec
- * "sparc-linux-gcc -nostdlib -static -o t t.o /path/to/dietlibc/bin-sparc/start.o /path/to/dietlibc/bin-sparc/dietlibc.a"
-*/
-
-void error(const char *message) {
-  write(2,message,strlen(message));
-  exit(1);
-}
-
-int main(int argc,char *argv[]) {
-  int link=0;
-  int compile=0;
-  char diethome[]=DIETHOME;
-  char platform[1000]=DIETHOME "/bin-";
-  char *nostdlib="-nostdlib";
-  char *libgcc="-lgcc";
-  char dashL[1000]="-L";
-  int i;
-
-  if (argc<2) {
-    error("usage: diet [gcc command line]\n"
-	  "e.g.   diet gcc -c t.c\n"
-	  "or     diet sparc-linux-gcc -o foo foo.c bar.o\n");
-  }
-  {
-    char *tmp=strchr(argv[1],0)-2;
-    char *tmp2;
-    char *cc=argv[1];
-    if (tmp<cc) goto donttouch;
-    if ((tmp2=strchr(cc,'-'))) {	/* cross compiling? */
-      int len=strlen(platform);
-      if (tmp2-cc>90) error("platform name too long!\n");
-      memmove(platform+len,argv[1],tmp2-cc);
-      platform[tmp2-cc+len]=0;
-/*      printf("found platform %s\n",platform); */
-    } else {
-#ifdef __sparc__
-      strcat(platform,"sparc");
-#endif
-#ifdef __ppc__
-      strcat(platform,"ppc");
-#endif
-#ifdef __i386__
-      strcat(platform,"i386");
-#endif
-#ifdef __alpha__
-      strcat(platform,"alpha");
-#endif
-#ifdef __arm__
-      strcat(platform,"arm");
-#endif
-#ifdef __mips__
-      strcat(platform,"mips");
-#endif
-    }
-    strcat(dashL,platform);
-    if (!strcmp(tmp,"cc")) {
-      char **newargv;
-      char **dest;
-      char *a,*b,*c;
-/* we need to add -I... if the command line contains -c, -S or -E */
-      for (i=2; i<argc; ++i)
-	if (!strcmp(argv[i],"-c") || !strcmp(argv[i],"-S") || !strcmp(argv[i],"-E"))
-	  compile=1;
-/* we need to add -nostdlib if we are not compiling*/
-      link=!compile;
-#if 0
-      for (i=2; i<argc; ++i)
-	if (!strcmp(argv[i],"-o"))
-	  if (!compile) link=1;
-#endif
-      newargv=alloca(sizeof(char*)*(argc+6));
-      a=alloca(strlen(diethome)+20);
-      b=alloca(strlen(platform)+20);
-      c=alloca(strlen(platform)+20);
-
-      strcpy(a,"-I"); strcat(a,diethome); strcat(a,"/include");
-      strcpy(b,platform); strcat(b,"/start.o");
-      strcpy(c,platform); strcat(c,"/dietlibc.a");
-
-      dest=newargv;
-      *dest++=argv[1];
-      if (link) { *dest++=nostdlib; *dest++=dashL; }
-      if (compile || link) *dest++=a;
-      for (i=2; i<argc; ++i)
-	*dest++=argv[i];
-      if (link) { *dest++=b; *dest++=c; *dest++=libgcc; }
-      *dest=0;
-      execvp(newargv[0],newargv);
-      goto error;
-    } else if (!strcmp(tmp,"ld")) {
-    }
-  }
-donttouch:
-  execvp(argv[1],argv+1);
-error:
-  error("execvp failed!\n");
-  return 1;
-}
diff --git a/mdk-stage1/dietlibc/dietdirent.h b/mdk-stage1/dietlibc/dietdirent.h
deleted file mode 100644
index d732cf7dc..000000000
--- a/mdk-stage1/dietlibc/dietdirent.h
+++ /dev/null
@@ -1,6 +0,0 @@
-struct __dirstream {
-  int fd;
-  char buf[1024];
-  unsigned int num;
-  unsigned int cur;
-};				/* stream data from opendir() */
diff --git a/mdk-stage1/dietlibc/dietfeatures.h b/mdk-stage1/dietlibc/dietfeatures.h
deleted file mode 100644
index e1de38577..000000000
--- a/mdk-stage1/dietlibc/dietfeatures.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _DIETFEATURES_H
-#define _DIETFEATURES_H
-
-/* feel free to comment some of these out to reduce code size */
-
-//#define WANT_FLOATING_POINT_IN_PRINTF
-//#define WANT_FLOATING_POINT_IN_SCANF
-#define WANT_CHARACTER_CLASSES_IN_SCANF
-#define WANT_NULL_PRINTF
-
-#define SLASH_PROC_OK
-
-// #define WANT_BUFFERED_STDIO
-
-/* use errno_location instead of errno */
-// #define WANT_THREAD_SAFE
-
-/* make the startcode, etc. dynamic aware */
-/* #undef WANT_DYNAMIC */
-
-/* do you want smaller or faster string routines? */
-/* #define WANT_FASTER_STRING_ROUTINES */
-
-/* do you want ungetc?  makes fgetc more complex */
-#define WANT_UNGETC
-
-// #define WANT_LINKER_WARNINGS
-
-/* you need to define this if you want to run your programs with large
- * file support on kernel 2.2 or 2.4 */
-// #define WANT_LARGEFILE_BACKCOMPAT
-
-/* do you want localtime(3) to read /etc/localtime?
- * Needed for daylight saving time etc. */
-// #define WANT_TZFILE_PARSER
-
-/* stop uncommenting here ;-) */
-#ifndef WANT_FASTER_STRING_ROUTINES
-#define WANT_SMALL_STRING_ROUTINES
-#endif
-
-#endif
diff --git a/mdk-stage1/dietlibc/dietstdarg.h b/mdk-stage1/dietlibc/dietstdarg.h
deleted file mode 100644
index 827671b22..000000000
--- a/mdk-stage1/dietlibc/dietstdarg.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <stdarg.h>
-
-/* this assumes that va_copy() will be a macro, it is on gcc */
-#ifndef va_copy
-# ifdef __va_copy
-#  define va_copy(x, y) __va_copy(x, y)
-# else
-/* assume copying it works... */
-#  define va_copy(x, y) x = y
-# endif
-#endif
-
diff --git a/mdk-stage1/dietlibc/dietstdio.h b/mdk-stage1/dietlibc/dietstdio.h
deleted file mode 100644
index a1cbeba83..000000000
--- a/mdk-stage1/dietlibc/dietstdio.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* diet stdio -- no buffering ;-} */
-
-#include "dietfeatures.h"
-#include <sys/types.h>
-#ifdef WANT_THREAD_SAVE
-#include <pthread.h>
-#endif
-
-#define BUFSIZE 128
-
-typedef struct __file {
-  int fd;
-  int flags;
-#ifdef WANT_BUFFERED_STDIO
-  unsigned int bs;	/* read: bytes in buffer */
-  unsigned int bm;	/* position in buffer */
-  char buf[BUFSIZE];
-  struct __file *next;	/* for fflush */
-#endif
-  pid_t popen_kludge;
-#ifdef WANT_UNGETC
-  char ungetbuf;
-  char ungotten;
-#endif
-#ifdef WANT_THREAD_SAVE
-  pthread_mutex_t m;
-#endif
-} FILE;
-
-extern FILE *__stdio_root;
-
-#define ERRORINDICATOR 1
-#define EOFINDICATOR 2
-#define BUFINPUT 4
-#define BUFLINEWISE 8
-#define NOBUF 16
-#define UNSEEKABLE 32
-
-#define _IONBF 0
-#define _IOLBF 1
-#define _IOFBF 2
-
-/* internal function to flush buffer.
- * However, if next is BUFINPUT and the buffer is an input buffer, it
- * will not be flushed. Vice versa for output */
-extern int __fflush4(FILE *stream,int next);
-
-FILE *fopen (const char *path, const char *mode);
-FILE *fdopen (int fildes, const char *mode);
-FILE *freopen (const char *path, const char *mode, FILE *stream);
-
-int fgetc(FILE *stream);
-char *fgets(char *s, int size, FILE *stream);
-int getc(FILE *stream);
-int getchar(void);
-char *gets(char *s);
-int ungetc(int c, FILE *stream);
-
-int fputc(int c, FILE *stream);
-int fputs(const char *s, FILE *stream);
-int putc(int c, FILE *stream);
-int putchar(int c);
-int puts(const char *s);
-
-long fseek( FILE *stream, long offset, int whence);
-long ftell( FILE *stream);
-void rewind( FILE *stream);
-int fgetpos( FILE *stream, fpos_t *pos);
-int fsetpos( FILE *stream, fpos_t *pos);
-
-size_t fread( void *ptr, size_t size, size_t nmemb, FILE *stream);
-
-size_t fwrite( const void *ptr, size_t size, size_t nmemb, FILE *stream);
-
-int fflush(FILE *stream);
-
-int fclose(FILE *stream);
-
-extern FILE *stdout, *stderr, *stdin;
-
-#define EOF (int)(-1)
diff --git a/mdk-stage1/dietlibc/dietwarning.h b/mdk-stage1/dietlibc/dietwarning.h
deleted file mode 100644
index f7c67a175..000000000
--- a/mdk-stage1/dietlibc/dietwarning.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#include "dietfeatures.h"
-
-#ifdef WANT_LINKER_WARNINGS
-
-#ifndef __ASSEMBLER__
-
-#define link_warning(symbol,msg) \
-  asm (".section .gnu.warning." symbol "\n\t.string \"" msg "\"\n\t.previous");
-
-#else
-
-#define link_warning(symbol,msg) \
-  .section .gnu.warning.##symbol ;\
-  .string msg ;\
-  .previous
-
-#endif
-
-#else
-
-#define link_warning(foo,bar)
-
-#endif
diff --git a/mdk-stage1/dietlibc/dirstream.h b/mdk-stage1/dietlibc/dirstream.h
deleted file mode 100644
index dc8fba79c..000000000
--- a/mdk-stage1/dietlibc/dirstream.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* Copyright (C) 1991, 1992 Free Software Foundation, Inc.
-This file is part of the GNU C Library.
-
-The GNU C Library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
-
-The GNU C Library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
-
-You should have received a copy of the GNU Library General Public
-License along with the GNU C Library; see the file COPYING.LIB.  If
-not, write to the, 1992 Free Software Foundation, Inc., 675 Mass Ave,
-Cambridge, MA 02139, USA.  */
-
-/*
- *	POSIX Standard: 5.1.2 Directory Operations	<dirent.h>
- */
-
-#ifndef	_DIRSTREAM_H
-
-#define	_DIRSTREAM_H	1
-
-#include <sys/types.h>
-#include <dirent.h>
-#ifdef _POSIX_THREADS
-#include <pthread.h>
-#endif
-
-/* For now, syscall readdir () only supports one entry at a time. It
- * will be changed in the future.
-#define NUMENT		3
-*/
-#ifndef NUMENT
-#define NUMENT		1
-#endif
-
-#define SINGLE_READDIR	11
-#define MULTI_READDIR	12
-#define NEW_READDIR	13
-
-/* Directory stream type.  */
-struct __dirstream {
-  /* file descriptor */
-  int dd_fd;
-
-  /* offset of the next dir entry in buffer */
-  off_t dd_nextloc;
-
-  /* bytes of valid entries in buffer */
-  size_t dd_size;
-
-  /* -> directory buffer */
-  struct dirent *dd_buf;
-
-  /* we have to convert */
-  struct dirent convbuf;
-
-  /* offset of the next dir entry in directory. */
-  off_t dd_nextoff;
-
-  /* total size of buffer */
-  size_t dd_max;
- 
-  enum {unknown, have_getdents, no_getdents} dd_getdents;
-
-  /* lock */
-#ifdef _POSIX_THREADS
-  pthread_mutex_t *dd_lock;
-#else
-  void *dd_lock;
-#endif
-};				/* stream data from opendir() */
-
-#endif /* dirent.h  */
diff --git a/mdk-stage1/dietlibc/i386/Makefile.add b/mdk-stage1/dietlibc/i386/Makefile.add
deleted file mode 100644
index b685cc360..000000000
--- a/mdk-stage1/dietlibc/i386/Makefile.add
+++ /dev/null
@@ -1,3 +0,0 @@
-
-CFLAGS+=-march=i386 -mcpu=i386 -Os -fomit-frame-pointer
-VPATH:=i386:syscalls.s:$(VPATH)
diff --git a/mdk-stage1/dietlibc/i386/__longjmp.S b/mdk-stage1/dietlibc/i386/__longjmp.S
deleted file mode 100644
index 098275037..000000000
--- a/mdk-stage1/dietlibc/i386/__longjmp.S
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <setjmp.h>
-
-.text
-.global __longjmp
-__longjmp:
-	movl 4(%esp), %ecx	/* User's jmp_buf in %ecx.  */
-	movl 8(%esp), %eax	/* Second argument is return value.  */
-	/* Save the return address now.  */
-	movl (JB_PC*4)(%ecx), %edx
-	/* Restore registers.  */
-	movl (JB_BX*4)(%ecx), %ebx
-	movl (JB_SI*4)(%ecx), %esi
-	movl (JB_DI*4)(%ecx), %edi
-	movl (JB_BP*4)(%ecx), %ebp
-	movl (JB_SP*4)(%ecx), %esp
-	/* Jump to saved PC.  */
-	jmp *%edx
-.size __longjmp,.-__longjmp;
diff --git a/mdk-stage1/dietlibc/i386/__testandset.S b/mdk-stage1/dietlibc/i386/__testandset.S
deleted file mode 100644
index af7b4d5a0..000000000
--- a/mdk-stage1/dietlibc/i386/__testandset.S
+++ /dev/null
@@ -1,8 +0,0 @@
-.text
-.global __testandset
-__testandset:
-	xorl	%eax, %eax
-	movl	0x4(%esp),%edx
-	incl	%eax
-	xchgl	%eax,(%edx)
-	ret
diff --git a/mdk-stage1/dietlibc/i386/clone.S b/mdk-stage1/dietlibc/i386/clone.S
deleted file mode 100644
index ac02eb468..000000000
--- a/mdk-stage1/dietlibc/i386/clone.S
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <asm/unistd.h>
-
-.text
-.weak clone
-clone:
-.global __clone
-__clone:
-	movl	4(%esp), %ecx	/* have non null thread_funcion */
-	testl	%ecx, %ecx
-	je	.Lclone_error
-
-	movl	8(%esp), %ecx	/* have non null child_stack pointer */
-	testl	%ecx, %ecx
-	je	.Lclone_error
-
-	/* put the parameter on thread stack */
-	subl	$8, %ecx
-
-	movl	16(%esp), %eax	/* arg */
-	movl	%eax, 4(%ecx)
-
-	movl	4(%esp), %eax	/* thread_func */
-	movl	%eax, 0(%ecx)
-
-	/* the syscall */
-	pushl	%ebx
-	movl	16(%esp), %ebx	/* flags */
-	movl	$__NR_clone, %eax
-	int	$0x80
-	popl	%ebx
-
-	testl	%eax, %eax
-	jl	.Lclone_error
-	je	.Lstart_thread
-	ret
-
-.Lstart_thread:
-	xorl	%ebp,%ebp
-	call	*%ebx
-	pushl	%eax
-	call	_exit
-
-.Lclone_error:
-	negl	%eax
-	pushl	%eax
-	call	__errno_location
-	popl	%ecx
-	movl	%ecx, (%eax)
-	xorl	%eax, %eax
-	decl	%eax
-	ret
diff --git a/mdk-stage1/dietlibc/i386/mmap.c b/mdk-stage1/dietlibc/i386/mmap.c
deleted file mode 100644
index 26ecb55c0..000000000
--- a/mdk-stage1/dietlibc/i386/mmap.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <linux/types.h>
-#include <linux/unistd.h>
-
-#define __NR__mmap __NR_mmap
-_syscall1(int,_mmap,unsigned long *,buffer)
-
-char *mmap(char *addr, size_t len, int prot, int flags, int fd, unsigned long off) {
-  unsigned long buffer[6];
-  buffer[0] = (unsigned long)addr;
-  buffer[1] = (unsigned long)len;
-  buffer[2] = (unsigned long)prot;
-  buffer[3] = (unsigned long)flags;
-  buffer[4] = (unsigned long)fd;
-  buffer[5] = (unsigned long)off;
-  return (char*) _mmap(buffer);
-}
diff --git a/mdk-stage1/dietlibc/i386/select.S b/mdk-stage1/dietlibc/i386/select.S
deleted file mode 100644
index 9e7066eae..000000000
--- a/mdk-stage1/dietlibc/i386/select.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(_newselect,select,__libc_select)
diff --git a/mdk-stage1/dietlibc/i386/setjmp.S b/mdk-stage1/dietlibc/i386/setjmp.S
deleted file mode 100644
index 9bfecf565..000000000
--- a/mdk-stage1/dietlibc/i386/setjmp.S
+++ /dev/null
@@ -1,62 +0,0 @@
-#include <setjmp.h>
-
-/* setjmp for i386.
-   Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-.section	.rodata
-.text
-.weak setjmp
-setjmp:
-.globl __setjmp
-__setjmp:
-	popl %eax		/* Pop return address.  */
-	popl %ecx		/* Pop jmp_buf.  */
-	pushl $0		/* Push zero argument.  */
-	pushl %ecx		/* Push jmp_buf.  */
-	pushl %eax		/* Push back return address.  */
-
-.globl __sigsetjmp
-__sigsetjmp:
-	movl 4(%esp), %eax	/* User's jmp_buf in %eax.  */
-	/* Save registers.  */
-	movl %ebx, (JB_BX*4)(%eax)
-	movl %esi, (JB_SI*4)(%eax)
-	movl %edi, (JB_DI*4)(%eax)
-	movl %ebp, (JB_BP*4)(%eax)
-	leal 4(%esp), %ecx	/* Save SP as it will be after we return.  */
-	movl %ecx, (JB_SP*4)(%eax)
-	movl 0(%esp), %ecx	/* Save PC we are returning to now.  */
-	movl %ecx, (JB_PC*4)(%eax)
-
-	/* Make a tail call to __sigjmp_save; it takes the same args.  */
-#ifdef	PIC
-	/* We cannot use the PLT, because it requires that %ebx be set, but
-           we can't save and restore our caller's value.  Instead, we do an
-           indirect jump through the GOT, using for the temporary register
-           %ecx, which is call-clobbered.  */
-	call L(here)
-L(here):
-	popl %ecx
-	addl $_GLOBAL_OFFSET_TABLE_+[.-L(here)], %ecx
-	movl C_SYMBOL_NAME(__sigjmp_save@GOT)(%ecx), %ecx
-	jmp *%ecx
-#else
-	jmp __sigjmp_save
-#endif
-.size __sigsetjmp,.-__sigsetjmp;
diff --git a/mdk-stage1/dietlibc/i386/start.S b/mdk-stage1/dietlibc/i386/start.S
deleted file mode 100644
index 167bb779c..000000000
--- a/mdk-stage1/dietlibc/i386/start.S
+++ /dev/null
@@ -1,42 +0,0 @@
-#include "start.h"
-
-#ifdef __i386__
-.text
-.globl _start
-_start:
-#if 0
-	popl	%ecx
-	movl	%esp, %esi
-	leal	4(%esp,%ecx,4),%eax
-#else
-	movl (%esp),%ecx	/* %ecx = argc */
-	leal 4(%esp),%esi	/* %esi = argv */
-
-	leal 4(%esi,%ecx,4),%eax	/* eax = 4*ecx+4 = envp */
-#endif
-	pushl %eax
-	pushl %esi
-	pushl %ecx
-	movl %eax,environ
-
-#ifdef WANT_DYNAMIC
-/* in %edx we have the dynamic _fini ( register this if non null ) */
-	test	%edx, %edx
-	je	.Linit
-	push	%edx
-	call	atexit
-	pop	%edx
-.Linit:
-	call	_init
-	push	$_fini
-	call	atexit
-	pop	%edx
-#endif
-
-	call main
-	pushl %eax
-	call exit
-.Lfefe:
-	.size	 _start,.Lfefe-_start
-#endif
-
diff --git a/mdk-stage1/dietlibc/i386/unified.S b/mdk-stage1/dietlibc/i386/unified.S
deleted file mode 100644
index f182bdb4b..000000000
--- a/mdk-stage1/dietlibc/i386/unified.S
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <dietfeatures.h>
-
-.text
-.global __unified_syscall
-__unified_syscall:
-	movzbl	%al, %eax
-	push	%edi
-	push	%esi
-	push	%ebx
-	movl	%esp,%edi
-	movl	0x10(%edi),%ebx
-	movl	0x14(%edi),%ecx
-	movl	0x18(%edi),%edx
-	movl	0x1c(%edi),%esi
-	movl	0x20(%edi),%edi
-	int	$0x80
-	cmp	$-124,%eax
-	jbe	.Lnoerror
-#ifdef WANT_THREAD_SAVE
-	movl	%eax,%ebx
-	call	__errno_location
-	neg	%ebx
-	movl	%ebx,(%eax)
-#else
-	neg	%eax
-	mov	%eax,errno
-#endif
-	xor	%eax,%eax
-	dec	%eax
-.Lnoerror:
-	pop	%ebx
-	pop	%esi
-	pop	%edi
-	ret
diff --git a/mdk-stage1/dietlibc/include/alloca.h b/mdk-stage1/dietlibc/include/alloca.h
deleted file mode 100644
index e69de29bb..000000000
--- a/mdk-stage1/dietlibc/include/alloca.h
+++ /dev/null
diff --git a/mdk-stage1/dietlibc/include/arpa/inet.h b/mdk-stage1/dietlibc/include/arpa/inet.h
deleted file mode 100644
index 6d5a6dc35..000000000
--- a/mdk-stage1/dietlibc/include/arpa/inet.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ARPA_INET_H
-#define _ARPA_INET_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <netinet/in.h>
-
-int inet_aton(const char *cp, struct in_addr *inp) __THROW;
-unsigned long int inet_addr(const char *cp) __THROW;
-unsigned long int inet_network(const char *cp) __THROW;
-char *inet_ntoa(struct in_addr in) __THROW;
-struct in_addr inet_makeaddr(int net, int host) __THROW;
-unsigned long int inet_lnaof(struct in_addr in) __THROW;
-unsigned long int inet_netof(struct in_addr in) __THROW;
-
-int inet_pton (int AF, const char* CP, void* BUF) __THROW;
-const char* inet_ntop (int AF, const void* CP, char* BUF, size_t LEN) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/arpa/nameser.h b/mdk-stage1/dietlibc/include/arpa/nameser.h
deleted file mode 100644
index 1ee048d66..000000000
--- a/mdk-stage1/dietlibc/include/arpa/nameser.h
+++ /dev/null
@@ -1,217 +0,0 @@
-#ifndef _ARPA_NAMESER_H
-#define _ARPA_NAMESER_H
-
-#include <endian.h>
-
-#define NS_PACKETSZ	512	/* maximum packet size */
-#define NS_MAXDNAME	1025	/* maximum domain name */
-#define NS_MAXCDNAME	255	/* maximum compressed domain name */
-#define NS_MAXLABEL	63	/* maximum length of domain label */
-#define NS_HFIXEDSZ	12	/* #/bytes of fixed data in header */
-#define NS_QFIXEDSZ	4	/* #/bytes of fixed data in query */
-#define NS_RRFIXEDSZ	10	/* #/bytes of fixed data in r record */
-#define NS_INT32SZ	4	/* #/bytes of data in a u_int32_t */
-#define NS_INT16SZ	2	/* #/bytes of data in a u_int16_t */
-#define NS_INT8SZ	1	/* #/bytes of data in a u_int8_t */
-#define NS_INADDRSZ	4	/* IPv4 T_A */
-#define NS_IN6ADDRSZ	16	/* IPv6 T_AAAA */
-#define NS_CMPRSFLGS	0xc0	/* Flag bits indicating name compression. */
-#define NS_DEFAULTPORT	53	/* For both TCP and UDP. */
-
-/*
- * Currently defined type values for resources and queries.
- */
-typedef enum __ns_type {
-	ns_t_invalid = 0,	/* Cookie. */
-	ns_t_a = 1,		/* Host address. */
-	ns_t_ns = 2,		/* Authoritative server. */
-	ns_t_md = 3,		/* Mail destination. */
-	ns_t_mf = 4,		/* Mail forwarder. */
-	ns_t_cname = 5,		/* Canonical name. */
-	ns_t_soa = 6,		/* Start of authority zone. */
-	ns_t_mb = 7,		/* Mailbox domain name. */
-	ns_t_mg = 8,		/* Mail group member. */
-	ns_t_mr = 9,		/* Mail rename name. */
-	ns_t_null = 10,		/* Null resource record. */
-	ns_t_wks = 11,		/* Well known service. */
-	ns_t_ptr = 12,		/* Domain name pointer. */
-	ns_t_hinfo = 13,	/* Host information. */
-	ns_t_minfo = 14,	/* Mailbox information. */
-	ns_t_mx = 15,		/* Mail routing information. */
-	ns_t_txt = 16,		/* Text strings. */
-	ns_t_rp = 17,		/* Responsible person. */
-	ns_t_afsdb = 18,	/* AFS cell database. */
-	ns_t_x25 = 19,		/* X_25 calling address. */
-	ns_t_isdn = 20,		/* ISDN calling address. */
-	ns_t_rt = 21,		/* Router. */
-	ns_t_nsap = 22,		/* NSAP address. */
-	ns_t_nsap_ptr = 23,	/* Reverse NSAP lookup (deprecated). */
-	ns_t_sig = 24,		/* Security signature. */
-	ns_t_key = 25,		/* Security key. */
-	ns_t_px = 26,		/* X.400 mail mapping. */
-	ns_t_gpos = 27,		/* Geographical position (withdrawn). */
-	ns_t_aaaa = 28,		/* Ip6 Address. */
-	ns_t_loc = 29,		/* Location Information. */
-	ns_t_nxt = 30,		/* Next domain (security). */
-	ns_t_eid = 31,		/* Endpoint identifier. */
-	ns_t_nimloc = 32,	/* Nimrod Locator. */
-	ns_t_srv = 33,		/* Server Selection. */
-	ns_t_atma = 34,		/* ATM Address */
-	ns_t_naptr = 35,	/* Naming Authority PoinTeR */
-	ns_t_kx = 36,		/* Key Exchange */
-	ns_t_cert = 37,		/* Certification record */
-	ns_t_a6 = 38,		/* IPv6 address (deprecates AAAA) */
-	ns_t_dname = 39,	/* Non-terminal DNAME (for IPv6) */
-	ns_t_sink = 40,		/* Kitchen sink (experimentatl) */
-	ns_t_opt = 41,		/* EDNS0 option (meta-RR) */
-	ns_t_tsig = 250,	/* Transaction signature. */
-	ns_t_ixfr = 251,	/* Incremental zone transfer. */
-	ns_t_axfr = 252,	/* Transfer zone of authority. */
-	ns_t_mailb = 253,	/* Transfer mailbox records. */
-	ns_t_maila = 254,	/* Transfer mail agent records. */
-	ns_t_any = 255,		/* Wildcard match. */
-	ns_t_zxfr = 256,	/* BIND-specific, nonstandard. */
-	ns_t_max = 65536
-} ns_type;
-
-/*
- * Values for class field
- */
-typedef enum __ns_class {
-	ns_c_invalid = 0,	/* Cookie. */
-	ns_c_in = 1,		/* Internet. */
-	ns_c_2 = 2,		/* unallocated/unsupported. */
-	ns_c_chaos = 3,		/* MIT Chaos-net. */
-	ns_c_hs = 4,		/* MIT Hesiod. */
-	/* Query class values which do not appear in resource records */
-	ns_c_none = 254,	/* for prereq. sections in update requests */
-	ns_c_any = 255,		/* Wildcard match. */
-	ns_c_max = 65536
-} ns_class;
-
-typedef struct {
-        unsigned        id :16;         /* query identification number */
-#if BYTE_ORDER == BIG_ENDIAN
-                        /* fields in third byte */
-        unsigned        qr: 1;          /* response flag */
-        unsigned        opcode: 4;      /* purpose of message */
-        unsigned        aa: 1;          /* authoritive answer */
-        unsigned        tc: 1;          /* truncated message */
-        unsigned        rd: 1;          /* recursion desired */
-                        /* fields in fourth byte */
-        unsigned        ra: 1;          /* recursion available */
-        unsigned        unused :1;      /* unused bits (MBZ as of 4.9.3a3) */
-        unsigned        ad: 1;          /* authentic data from named */
-        unsigned        cd: 1;          /* checking disabled by resolver */
-        unsigned        rcode :4;       /* response code */
-#endif
-#if BYTE_ORDER == LITTLE_ENDIAN || BYTE_ORDER == PDP_ENDIAN
-                        /* fields in third byte */
-        unsigned        rd :1;          /* recursion desired */
-        unsigned        tc :1;          /* truncated message */
-        unsigned        aa :1;          /* authoritive answer */
-        unsigned        opcode :4;      /* purpose of message */
-        unsigned        qr :1;          /* response flag */
-                        /* fields in fourth byte */
-        unsigned        rcode :4;       /* response code */
-        unsigned        cd: 1;          /* checking disabled by resolver */
-        unsigned        ad: 1;          /* authentic data from named */
-        unsigned        unused :1;      /* unused bits (MBZ as of 4.9.3a3) */
-        unsigned        ra :1;          /* recursion available */
-#endif
-                        /* remaining bytes */
-        unsigned        qdcount :16;    /* number of question entries */
-        unsigned        ancount :16;    /* number of answer entries */
-        unsigned        nscount :16;    /* number of authority entries */
-        unsigned        arcount :16;    /* number of resource entries */
-} HEADER;
-
-#define PACKETSZ        NS_PACKETSZ
-#define MAXDNAME        NS_MAXDNAME
-#define MAXCDNAME       NS_MAXCDNAME
-#define MAXLABEL        NS_MAXLABEL
-#define HFIXEDSZ        NS_HFIXEDSZ
-#define QFIXEDSZ        NS_QFIXEDSZ
-#define RRFIXEDSZ       NS_RRFIXEDSZ
-#define INT32SZ         NS_INT32SZ
-#define INT16SZ         NS_INT16SZ
-#define INADDRSZ        NS_INADDRSZ
-#define IN6ADDRSZ       NS_IN6ADDRSZ
-#define INDIR_MASK      NS_CMPRSFLGS
-#define NAMESERVER_PORT NS_DEFAULTPORT
-
-#define S_ZONE          ns_s_zn
-#define S_PREREQ        ns_s_pr
-#define S_UPDATE        ns_s_ud
-#define S_ADDT          ns_s_ar
-
-#define QUERY           ns_o_query
-#define IQUERY          ns_o_iquery
-#define STATUS          ns_o_status
-#define NS_NOTIFY_OP    ns_o_notify
-#define NS_UPDATE_OP    ns_o_update
-
-#define NOERROR         ns_r_noerror
-#define FORMERR         ns_r_formerr
-#define SERVFAIL        ns_r_servfail
-#define NXDOMAIN        ns_r_nxdomain
-#define NOTIMP          ns_r_notimpl
-#define REFUSED         ns_r_refused
-#define YXDOMAIN        ns_r_yxdomain
-#define YXRRSET         ns_r_yxrrset
-#define NXRRSET         ns_r_nxrrset
-#define NOTAUTH         ns_r_notauth
-#define NOTZONE         ns_r_notzone
-
-#define DELETE          ns_uop_delete
-#define ADD             ns_uop_add
-
-#define T_A             ns_t_a
-#define T_NS            ns_t_ns
-#define T_MD            ns_t_md
-#define T_MF            ns_t_mf
-#define T_CNAME         ns_t_cname
-#define T_SOA           ns_t_soa
-#define T_MB            ns_t_mb
-#define T_MG            ns_t_mg
-#define T_MR            ns_t_mr
-#define T_NULL          ns_t_null
-#define T_WKS           ns_t_wks
-#define T_PTR           ns_t_ptr
-#define T_HINFO         ns_t_hinfo
-#define T_MINFO         ns_t_minfo
-#define T_MX            ns_t_mx
-#define T_TXT           ns_t_txt
-#define T_RP            ns_t_rp
-#define T_AFSDB         ns_t_afsdb
-#define T_X25           ns_t_x25
-#define T_ISDN          ns_t_isdn
-#define T_RT            ns_t_rt
-#define T_NSAP          ns_t_nsap
-#define T_NSAP_PTR      ns_t_nsap_ptr
-#define T_SIG           ns_t_sig
-#define T_KEY           ns_t_key
-#define T_PX            ns_t_px
-#define T_GPOS          ns_t_gpos
-#define T_AAAA          ns_t_aaaa
-#define T_LOC           ns_t_loc
-#define T_NXT           ns_t_nxt
-#define T_EID           ns_t_eid
-#define T_NIMLOC        ns_t_nimloc
-#define T_SRV           ns_t_srv
-#define T_ATMA          ns_t_atma
-#define T_NAPTR         ns_t_naptr
-#define T_TSIG          ns_t_tsig
-#define T_IXFR          ns_t_ixfr
-#define T_AXFR          ns_t_axfr
-#define T_MAILB         ns_t_mailb
-#define T_MAILA         ns_t_maila
-#define T_ANY           ns_t_any
-
-#define C_IN            ns_c_in
-#define C_CHAOS         ns_c_chaos
-#define C_HS            ns_c_hs
-#define C_NONE          ns_c_none
-#define C_ANY           ns_c_any
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/assert.h b/mdk-stage1/dietlibc/include/assert.h
deleted file mode 100644
index bb573d0f2..000000000
--- a/mdk-stage1/dietlibc/include/assert.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _ASSERT_H
-#define _ASSERT_H
-
-#include <sys/cdefs.h>
-
-/* This prints an "Assertion failed" message and aborts.  */
-extern void __assert_fail (__const char *__assertion, __const char *__file,
-			   unsigned int __line, __const char *__function)
-     __THROW __attribute__ ((__noreturn__));
-
-#ifdef __PRETTY_FUNCTION__
-#define __ASSERT_FUNCTION __PRETTY_FUNCTION__
-#else
-#define __ASSERT_FUNCTION __func__
-#endif
-
-#undef assert
-#ifdef NDEBUG
-#define assert(expr)
-#else
-# define assert(expr)							      \
-  ((void) ((expr) ? 0 :							      \
-	   (__assert_fail (#expr,				      \
-			   __FILE__, __LINE__, __ASSERT_FUNCTION), 0)))
-#endif
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/ctype.h b/mdk-stage1/dietlibc/include/ctype.h
deleted file mode 100644
index 9322e8c7b..000000000
--- a/mdk-stage1/dietlibc/include/ctype.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef	_CTYPE_H
-#define _CTYPE_H
-
-#include <sys/cdefs.h>
-
-extern int isascii (int c) __THROW __attribute__ ((__const__));
-extern int isblank (int c) __THROW __attribute__ ((__const__));
-extern int isalnum (int c) __THROW __attribute__ ((__const__));
-extern int isalpha (int c) __THROW __attribute__ ((__const__));
-extern int isdigit (int c) __THROW __attribute__ ((__const__));
-extern int isspace (int c) __THROW __attribute__ ((__const__));
-
-extern int isupper (int c) __THROW __attribute__ ((__const__));
-extern int islower (int c) __THROW __attribute__ ((__const__));
-
-extern int tolower(int c) __THROW __attribute__ ((__const__));
-extern int toupper(int c) __THROW __attribute__ ((__const__));
-
-extern int isprint(int c) __THROW __attribute__ ((__const__));
-extern int ispunct(int c) __THROW __attribute__ ((__const__));
-extern int iscntrl(int c) __THROW __attribute__ ((__const__));
-
-/* fscking GNU extensions! */
-extern int isxdigit(int c) __THROW __attribute__ ((__const__));
-
-extern int isgraph(int c) __THROW __attribute__ ((__const__));
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/daemon.h b/mdk-stage1/dietlibc/include/daemon.h
deleted file mode 100644
index 9049f367d..000000000
--- a/mdk-stage1/dietlibc/include/daemon.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _DAEMON_H
-#define _DAEMON_H
-
-extern int daemon (int nochdir,int noclose);
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/dirent.h b/mdk-stage1/dietlibc/include/dirent.h
deleted file mode 100644
index b0ad4f5ec..000000000
--- a/mdk-stage1/dietlibc/include/dirent.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _DIRENT_H
-#define _DIRENT_H       1
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <linux/dirent.h>
-
-#define d_fileno	d_ino	/* Backwards compatibility.  */
-
-#undef  _DIRENT_HAVE_D_NAMLEN
-#define _DIRENT_HAVE_D_RECLEN
-#define _DIRENT_HAVE_D_OFF
-#define _DIRENT_HAVE_D_TYPE
-
-typedef struct __dirstream DIR;
-
-DIR *opendir (const char *__name) __THROW;
-int closedir (DIR *__dirp) __THROW;
-struct dirent *readdir (DIR *__dirp) __THROW;
-struct dirent64 *readdir64 (DIR *__dirp) __THROW;
-void rewinddir (DIR *__dirp) __THROW;
-void seekdir (DIR *__dirp, long int __pos) __THROW;
-long int telldir (DIR *__dirp) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/dlfcn.h b/mdk-stage1/dietlibc/include/dlfcn.h
deleted file mode 100644
index b96f8f615..000000000
--- a/mdk-stage1/dietlibc/include/dlfcn.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _DLFCN_H
-#define _DLFCN_H 1
-
-#define RTLD_LAZY	0x00000
-#define RTLD_NOW	0x00001
-
-#define RTLD_LOCAL	0x00000
-#define RTLD_GLOBAL	0x10000
-
-void *dlopen (const char *filename, int flag);
-const char *dlerror(void);
-void *dlsym(void *handle, char *symbol);
-int dlclose (void *handle);
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/elf.h b/mdk-stage1/dietlibc/include/elf.h
deleted file mode 100644
index be09dbee4..000000000
--- a/mdk-stage1/dietlibc/include/elf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/elf.h>
diff --git a/mdk-stage1/dietlibc/include/endian.h b/mdk-stage1/dietlibc/include/endian.h
deleted file mode 100644
index 463c24fff..000000000
--- a/mdk-stage1/dietlibc/include/endian.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef	_ENDIAN_H
-#define	_ENDIAN_H
-
-#define	__LITTLE_ENDIAN	1234
-#define	__BIG_ENDIAN	4321
-
-#ifdef __i386__
-#define __BYTE_ORDER __LITTLE_ENDIAN
-#define __FLOAT_WORD_ORDER __BYTE_ORDER
-#endif
-
-#ifdef __sparc__
-#define __BYTE_ORDER __BIG_ENDIAN
-#define __FLOAT_WORD_ORDER __BYTE_ORDER
-#endif
-
-#ifdef __mips__
-#ifdef __MIPSEB__
-#define __BIG_ENDIAN__
-#endif
-#endif
-
-#ifndef __BYTE_ORDER
-#ifdef __BIG_ENDIAN__
-#define __BYTE_ORDER __BIG_ENDIAN
-#define __FLOAT_WORD_ORDER __BYTE_ORDER
-#else
-#define __BYTE_ORDER __LITTLE_ENDIAN
-#define __FLOAT_WORD_ORDER __BYTE_ORDER
-#endif
-#endif
-
-#define LITTLE_ENDIAN	__LITTLE_ENDIAN
-#define BIG_ENDIAN	__BIG_ENDIAN
-#define BYTE_ORDER	__BYTE_ORDER
-
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-# define __LONG_LONG_PAIR(HI, LO) LO, HI
-#elif __BYTE_ORDER == __BIG_ENDIAN
-# define __LONG_LONG_PAIR(HI, LO) HI, LO
-#endif
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/errno.h b/mdk-stage1/dietlibc/include/errno.h
deleted file mode 100644
index d1c68f39c..000000000
--- a/mdk-stage1/dietlibc/include/errno.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ERRNO_H
-#define	_ERRNO_H
-
-extern int errno;
-
-#include <linux/errno.h>
-
-extern int *__errno_location(void);
-extern void __set_errno(int error);
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/fcntl.h b/mdk-stage1/dietlibc/include/fcntl.h
deleted file mode 100644
index b792502c1..000000000
--- a/mdk-stage1/dietlibc/include/fcntl.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _FCNTL_H
-#define _FCNTL_H
-
-#include <sys/cdefs.h>
-
-#include <sys/types.h>
-#include <unistd.h>
-
-#include <asm/fcntl.h>
-
-extern int fcntl (int __fd, int __cmd, ...) __THROW;
-extern int open (const char *__file, int __oflag, ...) __THROW;
-extern int open64 (const char *__file, int __oflag, ...) __THROW;
-extern int creat (const char *__file, mode_t __mode) __THROW;
-extern int creat64 (const char *__file, mode_t __mode) __THROW;
-extern int lockf (int __fd, int __cmd, off_t __len) __THROW;
-extern int lockf64 (int __fd, int __cmd, off64_t __len) __THROW;
-
-#define F_ULOCK 0	/* Unlock a previously locked region.  */
-#define F_LOCK  1	/* Lock a region for exclusive use.  */
-#define F_TLOCK 2	/* Test and lock a region for exclusive use.  */
-#define F_TEST  3	/* Test a region for other processes locks.  */
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/features.h b/mdk-stage1/dietlibc/include/features.h
deleted file mode 100644
index 5b0283f20..000000000
--- a/mdk-stage1/dietlibc/include/features.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#warning "someone included features.h, apparently someone is including glibc headers!"
-
-#define __dietlibc__
diff --git a/mdk-stage1/dietlibc/include/fnmatch.h b/mdk-stage1/dietlibc/include/fnmatch.h
deleted file mode 100644
index 762b43ff7..000000000
--- a/mdk-stage1/dietlibc/include/fnmatch.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _FNMATCH_H
-#define _FNMATCH_H
-
-#include <sys/cdefs.h>
-
-int fnmatch(const char *pattern, const char *string, int flags) __THROW;
-
-#define FNM_NOESCAPE 1
-#define FNM_PATHNAME 2
-#define FNM_FILE_NAME 2
-#define FNM_PERIOD 4
-#define FNM_LEADING_DIR 8
-#define FNM_CASEFOLD 16
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/ftw.h b/mdk-stage1/dietlibc/include/ftw.h
deleted file mode 100644
index c888f0021..000000000
--- a/mdk-stage1/dietlibc/include/ftw.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _FTW_H
-#define _FTW_H
-
-#include <sys/cdefs.h>
-#include <sys/stat.h>
-
-struct FTW
-  {
-    int base;
-    int level;
-  };
-
-int ftw (const char *dir, int (*fn)(const char *file, const struct stat *sb, int flag), int depth) __THROW;
-int  nftw (const char *dir, int (*fn)(const char *file, const struct stat *sb, int flag, struct FTW *s), int depth, int flags) __THROW;
-
-enum
-{
-  FTW_F,		/* Regular file.  */
-#define FTW_F	 FTW_F
-  FTW_D,		/* Directory.  */
-#define FTW_D	 FTW_D
-  FTW_DNR,		/* Unreadable directory.  */
-#define FTW_DNR	 FTW_DNR
-  FTW_NS,		/* Unstatable file.  */
-#define FTW_NS	 FTW_NS
-  FTW_SL,		/* Symbolic link.  */
-# define FTW_SL	 FTW_SL
-/* These flags are only passed from the `nftw' function.  */
-  FTW_DP,		/* Directory, all subdirs have been visited. */
-# define FTW_DP	 FTW_DP
-  FTW_SLN		/* Symbolic link naming non-existing file.  */
-# define FTW_SLN FTW_SLN
-};
-
-typedef int (*__ftw_func_t) (__const char *__filename,
-			     __const struct stat *__status, int __flag) __THROW;
-
-typedef int (*__nftw_func_t) (__const char *__filename,
-			      __const struct stat *__status, int __flag,
-			      struct FTW *__info) __THROW;
-
-#ifndef __NO_STAT64
-typedef int (*__ftw64_func_t) (__const char *__filename,
-			       __const struct stat64 *__status, int __flag) __THROW;
-
-typedef int (*__nftw64_func_t) (__const char *__filename,
-				__const struct stat64 *__status,
-				int __flag, struct FTW *__info) __THROW;
-#endif
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/getopt.h b/mdk-stage1/dietlibc/include/getopt.h
deleted file mode 100644
index ebfc5522d..000000000
--- a/mdk-stage1/dietlibc/include/getopt.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef __GETOPT_H__
-#define __GETOPT_H__
-
-extern int optind,opterr;
-extern char *optarg;
-int getopt(int argc, char *argv[], char *options);
-
-/* the following was taken from GNU getopt, it's not actually supported
- * by the diet libc! */
-extern int optopt;
-
-struct option {
-  const char* name;
-  int has_arg;
-  int* flag;
-  int val;
-};
-
-#define no_argument             0
-#define required_argument       1
-#define optional_argument       2
-
-extern int getopt_long(int argc, char *const *argv,
-		       const char *shortopts, const struct option *longopts,
-		       int *longind);
-
-extern int getopt_long_only(int argc, char *const *argv,
-			    const char *shortopts, const struct option *longopts,
-			    int *longind);
-
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/glob.h b/mdk-stage1/dietlibc/include/glob.h
deleted file mode 100644
index 80febbccf..000000000
--- a/mdk-stage1/dietlibc/include/glob.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef _GLOB_H
-#define _GLOB_H
-
-
-typedef struct {
-	size_t gl_pathc;    /* Count of paths matched so far  */
-	char **gl_pathv;    /* List of matched pathnames.  */
-	size_t gl_offs;     /* Slots to reserve in `gl_pathv'.  */
-	int gl_flags;		/* Set to FLAGS, maybe | GLOB_MAGCHAR.  */
-} glob_t;
-
-
-int glob(const char *pattern, int flags,
-	 int errfunc(const char * epath, int eerrno),
-	 glob_t *pglob) __THROW;
-
-void globfree(glob_t *pglob) __THROW;
-
-
-
-/* Bits set in the FLAGS argument to `glob'.  */
-#define	GLOB_ERR	(1 << 0)/* Return on read errors.  */
-#define	GLOB_MARK	(1 << 1)/* Append a slash to each name.  */
-#define	GLOB_NOSORT	(1 << 2)/* Don't sort the names.  */
-#define	GLOB_DOOFFS	(1 << 3)/* Insert PGLOB->gl_offs NULLs.  */
-#define	GLOB_NOCHECK	(1 << 4)/* If nothing matches, return the pattern.  */
-#define	GLOB_APPEND	(1 << 5)/* Append to results of a previous call.  */
-#define	GLOB_NOESCAPE	(1 << 6)/* Backslashes don't quote metacharacters.  */
-#define	GLOB_PERIOD	(1 << 7)/* Leading `.' can be matched by metachars.  */
-
-#define GLOB_MAGCHAR	 (1 << 8)/* Set in gl_flags if any metachars seen.  */
-#define GLOB_ALTDIRFUNC  (1 << 9)/* Use gl_opendir et al functions.  */
-#define GLOB_BRACE	 (1 << 10)/* Expand "{a,b}" to "a" "b".  */
-#define GLOB_NOMAGIC	 (1 << 11)/* If no magic chars, return the pattern.  */
-#define GLOB_TILDE	 (1 << 12)/* Expand ~user and ~ to home directories. */
-#define GLOB_ONLYDIR	 (1 << 13)/* Match only directories.  */
-#define GLOB_TILDE_CHECK (1 << 14)/* Like GLOB_TILDE but return an error
-				      if the user name is not available.  */
-#define __GLOB_FLAGS	(GLOB_ERR|GLOB_MARK|GLOB_NOSORT|GLOB_DOOFFS| \
-			 GLOB_NOESCAPE|GLOB_NOCHECK|GLOB_APPEND|     \
-			 GLOB_PERIOD|GLOB_ALTDIRFUNC|GLOB_BRACE|     \
-			 GLOB_NOMAGIC|GLOB_TILDE|GLOB_ONLYDIR|GLOB_TILDE_CHECK)
-
-
-/* Error returns from `glob'.  */
-#define	GLOB_NOSPACE	1	/* Ran out of memory.  */
-#define	GLOB_ABORTED	2	/* Read error.  */
-#define	GLOB_NOMATCH	3	/* No matches found.  */
-#define GLOB_NOSYS	4	/* Not implemented.  */
-/* Previous versions of this file defined GLOB_ABEND instead of
-   GLOB_ABORTED.  Provide a compatibility definition here.  */
-#define GLOB_ABEND GLOB_ABORTED
-
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/grp.h b/mdk-stage1/dietlibc/include/grp.h
deleted file mode 100644
index 32bf49afc..000000000
--- a/mdk-stage1/dietlibc/include/grp.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _GRP_H
-#define _GRP_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-struct group
-  {
-    char *gr_name;		/* Group name.	*/
-    char *gr_passwd;		/* Password.	*/
-    gid_t gr_gid;		/* Group ID.	*/
-    char **gr_mem;		/* Member list.	*/
-  };
-
-extern struct group *getgrgid (gid_t uid) __THROW;
-extern struct group *getgrnam (const char *name) __THROW;
-
-extern struct group *getgrent(void) __THROW;
-extern void setgrent(void) __THROW;
-extern void endgrent(void) __THROW;
-
-extern int setgroups(size_t n, const gid_t *groups) __THROW;
-extern int initgroups(const char *user, gid_t group) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/inttypes.h b/mdk-stage1/dietlibc/include/inttypes.h
deleted file mode 100644
index e69de29bb..000000000
--- a/mdk-stage1/dietlibc/include/inttypes.h
+++ /dev/null
diff --git a/mdk-stage1/dietlibc/include/limits.h b/mdk-stage1/dietlibc/include/limits.h
deleted file mode 100644
index a333debfd..000000000
--- a/mdk-stage1/dietlibc/include/limits.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef _LIMITS_H
-#define _LIMITS_H
-
-#include <linux/limits.h>
-
-#define __WORDSIZE 32
-
-#ifdef __alpha__
-#undef __WORDSIZE
-#define __WORDSIZE 64
-#endif
-
-#ifndef PATH_MAX
-#define PATH_MAX 4096
-#endif
-
-#define CHAR_BIT 8
-
-#define SCHAR_MIN (-128)
-#define SCHAR_MAX 0x7f
-#define UCHAR_MAX 0xff
-
-#define SHRT_MIN (-SHRT_MAX-1)
-#define SHRT_MAX 0x7fff
-#define USHRT_MAX 0xffff
-
-#define INT_MIN (-INT_MAX-1)
-#define INT_MAX 0x7fffffff
-#define UINT_MAX 0xffffffff
-
-#if __WORDSIZE == 64
-#define LONG_MAX 9223372036854775807L
-#define ULONG_MAX 18446744073709551615UL
-#else
-#define LONG_MAX 2147483647L
-#define ULONG_MAX 4294967295UL
-#endif
-#define LONG_MIN (-LONG_MAX - 1L)
-
-#define LLONG_MAX 9223372036854775807LL
-#define LLONG_MIN (-LLONG_MAX - 1LL)
-
-/* Maximum value an `unsigned long long int' can hold.  (Minimum is 0.)  */
-#define ULLONG_MAX 18446744073709551615ULL
-
-#define PASS_MAX 256
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/locale.h b/mdk-stage1/dietlibc/include/locale.h
deleted file mode 100644
index acbeec8c1..000000000
--- a/mdk-stage1/dietlibc/include/locale.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#warning "there is no locale support for diet libc yet"
-
-#define setlocale(a,b) 0
-#define bindtextdomain
-#define textdomain
-
diff --git a/mdk-stage1/dietlibc/include/malloc.h b/mdk-stage1/dietlibc/include/malloc.h
deleted file mode 100644
index c8b49f26d..000000000
--- a/mdk-stage1/dietlibc/include/malloc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <stdlib.h>
diff --git a/mdk-stage1/dietlibc/include/math.h b/mdk-stage1/dietlibc/include/math.h
deleted file mode 100644
index 2f4f2e33f..000000000
--- a/mdk-stage1/dietlibc/include/math.h
+++ /dev/null
@@ -1,61 +0,0 @@
-#ifndef _MATH_H
-#define _MATH_H
-
-#include <sys/cdefs.h>
-
-#define M_E		2.7182818284590452354	/* e */
-#define M_LOG2E		1.4426950408889634074	/* log_2 e */
-#define M_LOG10E	0.43429448190325182765	/* log_10 e */
-#define M_LN2		0.69314718055994530942	/* log_e 2 */
-#define M_LN10		2.30258509299404568402	/* log_e 10 */
-#define M_PI		3.14159265358979323846	/* pi */
-#define M_PI_2		1.57079632679489661923	/* pi/2 */
-#define M_PI_4		0.78539816339744830962	/* pi/4 */
-#define M_1_PI		0.31830988618379067154	/* 1/pi */
-#define M_2_PI		0.63661977236758134308	/* 2/pi */
-#define M_2_SQRTPI	1.12837916709551257390	/* 2/sqrt(pi) */
-#define M_SQRT2		1.41421356237309504880	/* sqrt(2) */
-#define M_SQRT1_2	0.70710678118654752440	/* 1/sqrt(2) */
-
-#define M_El		2.7182818284590452353602874713526625L  /* e */
-#define M_LOG2El	1.4426950408889634073599246810018922L  /* log_2 e */
-#define M_LOG10El	0.4342944819032518276511289189166051L  /* log_10 e */
-#define M_LN2l		0.6931471805599453094172321214581766L  /* log_e 2 */
-#define M_LN10l		2.3025850929940456840179914546843642L  /* log_e 10 */
-#define M_PIl		3.1415926535897932384626433832795029L  /* pi */
-#define M_PI_2l		1.5707963267948966192313216916397514L  /* pi/2 */
-#define M_PI_4l		0.7853981633974483096156608458198757L  /* pi/4 */
-#define M_1_PIl		0.3183098861837906715377675267450287L  /* 1/pi */
-#define M_2_PIl		0.6366197723675813430755350534900574L  /* 2/pi */
-#define M_2_SQRTPIl	1.1283791670955125738961589031215452L  /* 2/sqrt(pi) */
-#define M_SQRT2l	1.4142135623730950488016887242096981L  /* sqrt(2) */
-#define M_SQRT1_2l	0.7071067811865475244008443621048490L  /* 1/sqrt(2) */
-
-double sin(double d) __THROW __attribute__((__const__));
-double cos(double d) __THROW __attribute__((__const__));
-double tan(double d) __THROW __attribute__((__const__));
-
-double sinh(double d) __THROW __attribute__((__const__));
-double cosh(double d) __THROW __attribute__((__const__));
-double tanh(double d) __THROW __attribute__((__const__));
-
-double asin(double d) __THROW __attribute__((__const__));
-double acos(double d) __THROW __attribute__((__const__));
-double atan(double d) __THROW __attribute__((__const__));
-
-double asinh(double d) __THROW __attribute__((__const__));
-double acosh(double d) __THROW __attribute__((__const__));
-double atanh(double d) __THROW __attribute__((__const__));
-
-double exp(double d) __THROW __attribute__((__const__));
-double log(double d) __THROW __attribute__((__const__));
-double log10(double d) __THROW __attribute__((__const__));
-
-double pow(double x, double y) __THROW __attribute__((__const__));
-
-double sqrt(double x) __THROW __attribute__((__const__));
-double fabs(double x) __THROW __attribute__((__const__));
-double fmod(double x, double y) __THROW __attribute__((__const__));
-
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/memory.h b/mdk-stage1/dietlibc/include/memory.h
deleted file mode 100644
index 39adee705..000000000
--- a/mdk-stage1/dietlibc/include/memory.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _MEMORY_H
-#define _MEMORY_H
-
-#include <string.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/mntent.h b/mdk-stage1/dietlibc/include/mntent.h
deleted file mode 100644
index 301403224..000000000
--- a/mdk-stage1/dietlibc/include/mntent.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef _MNTENT_H
-#define _MNTENT_H
-
-#include <sys/cdefs.h>
-#include <stdio.h>
-#include <paths.h>
-
-#define MNTTAB          _PATH_MNTTAB    /* Deprecated alias.  */
-#define MOUNTED         _PATH_MOUNTED   /* Deprecated alias.  */
-
-/* General filesystem types.  */
-#define MNTTYPE_IGNORE	"ignore"	/* Ignore this entry.  */
-#define MNTTYPE_NFS	"nfs"		/* Network file system.  */
-#define MNTTYPE_SWAP	"swap"		/* Swap device.  */
-
-
-/* Generic mount options.  */
-#define MNTOPT_DEFAULTS	"defaults"	/* Use all default options.  */
-#define MNTOPT_RO	"ro"		/* Read only.  */
-#define MNTOPT_RW	"rw"		/* Read/write.  */
-#define MNTOPT_SUID	"suid"		/* Set uid allowed.  */
-#define MNTOPT_NOSUID	"nosuid"	/* No set uid allowed.  */
-#define MNTOPT_NOAUTO	"noauto"	/* Do not auto mount.  */
-
-__BEGIN_DECLS
-
-/* Structure describing a mount table entry.  */
-struct mntent
-  {
-    char *mnt_fsname;		/* Device or server for filesystem.  */
-    char *mnt_dir;		/* Directory mounted on.  */
-    char *mnt_type;		/* Type of filesystem: ufs, nfs, etc.  */
-    char *mnt_opts;		/* Comma-separated options for fs.  */
-    int mnt_freq;		/* Dump frequency (in days).  */
-    int mnt_passno;		/* Pass number for `fsck'.  */
-  };
-
-
-/* Prepare to begin reading and/or writing mount table entries from the
-   beginning of FILE.  MODE is as for `fopen'.  */
-extern FILE *setmntent (const char *file, const char *mode) __THROW;
-
-/* Read one mount table entry from STREAM.  Returns a pointer to storage
-   reused on the next call, or null for EOF or error (use feof/ferror to
-   check).  */
-extern struct mntent *getmntent (FILE* stream) __THROW;
-
-#ifdef __USE_MISC
-/* Reentrant version of the above function.  */
-extern struct mntent *getmntent_r (FILE* stream,
-				   struct mntent* result,
-				   char* buffer,
-				   int bufsize) __THROW;
-#endif
-
-/* Write the mount table entry described by MNT to STREAM.
-   Return zero on success, nonzero on failure.  */
-extern int addmntent (FILE* stream,
-		      const struct mntent* mnt) __THROW;
-
-/* Close a stream opened with `setmntent'.  */
-extern int endmntent (FILE *stream) __THROW;
-
-/* Search MNT->mnt_opts for an option matching OPT.
-   Returns the address of the substring, or null if none found.  */
-extern char *hasmntopt (const struct mntent *__mnt,
-			const char *opt) __THROW;
-
-
-__END_DECLS
-
-#endif	/* mntent.h */
diff --git a/mdk-stage1/dietlibc/include/net/if.h b/mdk-stage1/dietlibc/include/net/if.h
deleted file mode 100644
index 88f386f46..000000000
--- a/mdk-stage1/dietlibc/include/net/if.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _NET_IF_H
-#define _NET_IF_H
-
-#include <sys/cdefs.h>
-
-#include <linux/if.h>
-
-unsigned int if_nametoindex (const char *ifname) __THROW;
-char *if_indextoname (unsigned int ifindex, char *ifname) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/net/if_arp.h b/mdk-stage1/dietlibc/include/net/if_arp.h
deleted file mode 100644
index fe37a22dc..000000000
--- a/mdk-stage1/dietlibc/include/net/if_arp.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _NET_IF_ARP_H
-#define _NET_IF_ARP_H
-
-#include <linux/if_arp.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/net/route.h b/mdk-stage1/dietlibc/include/net/route.h
deleted file mode 100644
index 5e5db7b1a..000000000
--- a/mdk-stage1/dietlibc/include/net/route.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _NET_IF_ROUTE_H
-#define _NET_IF_ROUTE_H
-
-#include <linux/route.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/netdb.h b/mdk-stage1/dietlibc/include/netdb.h
deleted file mode 100644
index e90ea81ac..000000000
--- a/mdk-stage1/dietlibc/include/netdb.h
+++ /dev/null
@@ -1,90 +0,0 @@
-#ifndef _NETDB_H
-#define _NETDB_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-/* Absolute file name for network data base files.  */
-#define	_PATH_HEQUIV		"/etc/hosts.equiv"
-#define	_PATH_HOSTS		"/etc/hosts"
-#define	_PATH_NETWORKS		"/etc/networks"
-#define	_PATH_NSSWITCH_CONF	"/etc/nsswitch.conf"
-#define	_PATH_PROTOCOLS		"/etc/protocols"
-#define	_PATH_SERVICES		"/etc/services"
-
-/* Description of data base entry for a single service.  */
-struct servent
-{
-  char *s_name;			/* Official service name.  */
-  char **s_aliases;		/* Alias list.  */
-  int s_port;			/* Port number.  */
-  char *s_proto;		/* Protocol to use.  */
-};
-
-extern void endservent (void) __THROW;
-extern struct servent *getservent (void) __THROW;
-extern struct servent *getservbyname (const char *__name,
-				      const char *__proto) __THROW;
-extern struct servent *getservbyport (int __port, const char *__proto)
-     __THROW;
-
-struct hostent
-{
-  char *h_name;			/* Official name of host.  */
-  char **h_aliases;		/* Alias list.  */
-  int h_addrtype;		/* Host address type.  */
-  socklen_t h_length;		/* Length of address.  */
-  char **h_addr_list;		/* List of addresses from name server.  */
-#define	h_addr	h_addr_list[0]	/* Address, for backward compatibility.  */
-};
-
-extern void endhostent (void) __THROW;
-extern struct hostent *gethostent (void) __THROW;
-extern struct hostent *gethostbyaddr (const void *__addr, socklen_t __len,
-				      int __type) __THROW;
-extern struct hostent *gethostbyname (const char *__name) __THROW;
-extern struct hostent *gethostbyname2 (const char *__name, int __af) __THROW;
-
-/* this glibc "invention" is so ugly, I'm going to throw up any minute
- * now */
-extern int gethostbyname_r(const char* NAME, struct hostent* RESULT_BUF,char* BUF,
-			   size_t BUFLEN, struct hostent** RESULT,
-			   int* H_ERRNOP) __THROW;
-
-#define HOST_NOT_FOUND 1
-#define TRY_AGAIN 2
-#define NO_RECOVERY 3
-#define NO_ADDRESS 4
-
-extern int gethostbyaddr_r(const char* addr, size_t length, int format,
-		    struct hostent* result, char *buf, size_t buflen,
-		    struct hostent **RESULT, int *h_errnop) __THROW;
-
-struct protoent {
-  char    *p_name;        /* official protocol name */
-  char    **p_aliases;    /* alias list */
-  int     p_proto;        /* protocol number */
-};
-
-struct protoent *getprotoent(void) __THROW;
-struct protoent *getprotobyname(const char *name) __THROW;
-struct protoent *getprotobynumber(int proto) __THROW;
-void setprotoent(int stayopen) __THROW;
-void endprotoent(void) __THROW;
-
-
-/* Description of data base entry for a single network.  NOTE: here a
-   poor assumption is made.  The network number is expected to fit
-   into an unsigned long int variable.  */
-struct netent
-{
-  char *n_name;			/* Official name of network.  */
-  char **n_aliases;		/* Alias list.  */
-  int n_addrtype;		/* Net address type.  */
-  uint32_t n_net;		/* Network number.  */
-};
-
-extern struct netent *getnetbyname (__const char *__name) __THROW;
-
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/netinet/in.h b/mdk-stage1/dietlibc/include/netinet/in.h
deleted file mode 100644
index 0569c8289..000000000
--- a/mdk-stage1/dietlibc/include/netinet/in.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _NETINET_IN_H
-#define _NETINET_IN_H
-
-#include <linux/in.h>
-#include <linux/in6.h>
-
-#define IPPORT_RESERVED 1024
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/netinet/in_systm.h b/mdk-stage1/dietlibc/include/netinet/in_systm.h
deleted file mode 100644
index e69de29bb..000000000
--- a/mdk-stage1/dietlibc/include/netinet/in_systm.h
+++ /dev/null
diff --git a/mdk-stage1/dietlibc/include/netinet/ip.h b/mdk-stage1/dietlibc/include/netinet/ip.h
deleted file mode 100644
index 35bf9cc42..000000000
--- a/mdk-stage1/dietlibc/include/netinet/ip.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _NETINET_IP_H
-#define _NETINET_IP_H
-
-#include <linux/ip.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/paths.h b/mdk-stage1/dietlibc/include/paths.h
deleted file mode 100644
index 0e36bb10e..000000000
--- a/mdk-stage1/dietlibc/include/paths.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _PATHS_H
-#define _PATHS_H
-
-#define _PATH_BSHELL "/bin/sh"
-#define _PATH_DEFPATH "/bin:/usr/bin:"
-
-#define _PATH_DEVNULL "/dev/null"
-
-#define _PATH_CONSOLE "/dev/console"
-#define _PATH_MOUNTED "/etc/mtab"
-
-#define _PATH_PASSWD "/etc/passwd"
-#define _PATH_GROUP "/etc/group"
-#define _PATH_SHADOW "/etc/shadow"
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/pthread.h b/mdk-stage1/dietlibc/include/pthread.h
deleted file mode 100644
index e922ab28b..000000000
--- a/mdk-stage1/dietlibc/include/pthread.h
+++ /dev/null
@@ -1,227 +0,0 @@
-#ifndef _PTHREAD_H
-#define _PTHREAD_H 1
-
-#include <sched.h>
-#include <signal.h>
-#include <setjmp.h>
-
-/* arg... kernel haeder... */
-#define ENOTSUP 524 /* Operation is not supported */
-
-#define PTHREAD_STACK_SIZE	16384
-
-#define PTHREAD_THREADS_MAX	128
-
-#define MAX_SPIN_COUNT		50
-#define SPIN_SLEEP_DURATION	2000001
-
-#define PTHREAD_KEYS_MAX	7
-#define PTHREAD_DESTRUCTOR_ITERATIONS 10
-
-typedef struct _pthread_descr_struct *_pthread_descr;
-typedef unsigned long int pthread_t;
-
-/* Fast locks */
-struct _pthread_fastlock {
-  int __spinlock;
-};
-
-/* Mutexes */
-typedef struct {
-  struct _pthread_fastlock lock;
-  _pthread_descr owner;
-  int kind;
-  unsigned int count;
-} pthread_mutex_t;
-
-enum {
-  PTHREAD_MUTEX_FAST_NP,
-  PTHREAD_MUTEX_RECURSIVE_NP,
-  PTHREAD_MUTEX_ERRORCHECK_NP,
-};
-
-enum
-{
-  PTHREAD_PROCESS_PRIVATE,
-#define PTHREAD_PROCESS_PRIVATE PTHREAD_PROCESS_PRIVATE
-  PTHREAD_PROCESS_SHARED
-#define PTHREAD_PROCESS_SHARED PTHREAD_PROCESS_SHARED
-};
-
-#define PTHREAD_MUTEX_INITIALIZER \
-{{0}, 0, PTHREAD_MUTEX_FAST_NP, 0}
-
-#define PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP \
-{{0}, 0, PTHREAD_MUTEX_RECURSIVE_NP, 0}
-
-#define PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP \
-{{0}, 0, PTHREAD_MUTEX_ERRORCHECK_NP, 0}
-
-typedef struct {
-  int __mutexkind;
-} pthread_mutexattr_t;
-
-int pthread_mutex_init(pthread_mutex_t *mutex,
-		const pthread_mutexattr_t *mutexattr);
-int pthread_mutex_lock(pthread_mutex_t *mutex);
-int pthread_mutex_unlock(pthread_mutex_t *mutex);
-int pthread_mutex_trylock(pthread_mutex_t *mutex);
-int pthread_mutex_destroy(pthread_mutex_t *mutex);
-
-/* Conditions */
-typedef void* pthread_condattr_t;
-
-typedef struct {
-  struct _pthread_fastlock lock;
-  _pthread_descr wait_chain;
-} pthread_cond_t;
-
-#define PTHREAD_COND_INITIALIZER \
-{{0},0}
-
-int pthread_cond_init(pthread_cond_t *cond, pthread_condattr_t *cond_attr);
-int pthread_cond_destroy(pthread_cond_t *cond);
-int pthread_cond_signal(pthread_cond_t *cond);
-int pthread_cond_broadcast(pthread_cond_t *cond);
-int pthread_cond_timedwait(pthread_cond_t *cond, pthread_mutex_t *mutex,
-			   const struct timespec *abstime);
-int pthread_cond_wait(pthread_cond_t *cond, pthread_mutex_t *mutex);
-
-/* only for completeness (always return NULL) */
-int pthread_condattr_init(pthread_condattr_t *attr);
-int pthread_condattr_destroy(pthread_condattr_t *attr);
-int pthread_condattr_getpshared(const pthread_condattr_t *attr, int *pshared);
-int pthread_condattr_setpshared(pthread_condattr_t *attr, int pshared);
-
-/* thread specific variables */
-typedef unsigned int pthread_key_t;
-
-int pthread_key_create(pthread_key_t *key, void (*destructor)(const void*));
-int pthread_key_delete(pthread_key_t key);
-int pthread_setspecific(pthread_key_t key, const void *value);
-const void *pthread_getspecific(pthread_key_t key);
-
-
-/* Attributes for threads.  */
-typedef struct
-{
-  int		__detachstate;
-  int		__schedpolicy;
-  struct sched_param	__schedparam;
-  int		__inheritsched;
-  int		__scope;
-  void *	__stackaddr;
-  unsigned long __stacksize;
-} pthread_attr_t;
-
-enum
-{
-  PTHREAD_CREATE_JOINABLE,
-#define PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_JOINABLE
-  PTHREAD_CREATE_DETACHED
-#define PTHREAD_CREATE_DETACHED PTHREAD_CREATE_DETACHED
-};
-
-enum
-{
-  PTHREAD_EXPLICIT_SCHED,
-#define PTHREAD_EXPLICIT_SCHED PTHREAD_EXPLICIT_SCHED
-  PTHREAD_INHERIT_SCHED
-#define PTHREAD_INHERIT_SCHED PTHREAD_INHERIT_SCHED
-};
-
-enum	/* for completeness */
-{
-  PTHREAD_SCOPE_SYSTEM,
-#define PTHREAD_SCOPE_SYSTEM PTHREAD_SCOPE_SYSTEM
-  PTHREAD_SCOPE_PROCESS
-#define PTHREAD_SCOPE_PROCESS PTHREAD_SCOPE_PROCESS
-};
-
-int pthread_attr_init(pthread_attr_t *attr);
-int pthread_attr_destroy(pthread_attr_t *attr);
-
-int pthread_attr_setdetachstate(pthread_attr_t *attr, int detachstate);
-int pthread_attr_getdetachstate(const pthread_attr_t *attr, int *detachstate);
-
-int pthread_attr_setschedpolicy(pthread_attr_t *attr, int policy);
-int pthread_attr_getschedpolicy(const pthread_attr_t *attr, int *policy);
-
-int pthread_attr_setschedparam(pthread_attr_t *attr,
-				const struct sched_param *param);
-int pthread_attr_getschedparam(const pthread_attr_t *attr,
-				struct sched_param *param);
-
-int pthread_attr_setinheritsched(pthread_attr_t *attr, int inherit);
-int pthread_attr_getinheritsched(const pthread_attr_t *attr, int *inherit);
-
-int pthread_attr_setscope(pthread_attr_t *attr, int scope);
-int pthread_attr_getscope(const pthread_attr_t *attr, int *scope);
-
-int pthread_attr_setstackaddr(pthread_attr_t *attr, void *stack);
-int pthread_attr_getstackaddr(pthread_attr_t *attr, void **stack);
-
-int pthread_attr_setstacksize(pthread_attr_t *attr, size_t stacksize);
-int pthread_attr_getstacksize(pthread_attr_t *attr, size_t *stacksize);
-
-/* ONCE */
-typedef int pthread_once_t;
-#define PTHREAD_ONCE_INIT	0
-
-int __pthread_once(pthread_once_t* once_control, void (*init_routine)(void));
-int pthread_once(pthread_once_t* once_control, void (*init_routine)(void));
-
-/* CANCEL */
-
-enum {
-  PTHREAD_CANCEL_ENABLE,
-#define PTHREAD_CANCEL_ENABLE PTHREAD_CANCEL_ENABLE
-  PTHREAD_CANCEL_DISABLE,
-#define PTHREAD_CANCEL_DISABLE PTHREAD_CANCEL_DISABLE
-};
-
-enum {
-  PTHREAD_CANCEL_ASYNCHRONOUS,
-#define PTHREAD_CANCEL_ASYNCHRONOUS PTHREAD_CANCEL_ASYNCHRONOUS
-  PTHREAD_CANCEL_DEFERRED,
-#define PTHREAD_CANCEL_DEFERRED PTHREAD_CANCEL_DEFERRED
-};
-
-#define PTHREAD_CANCELED ((void *) -1)
-
-int pthread_cancel(pthread_t thread);
-int pthread_setcancelstate(int state, int *oldstate);
-
-int pthread_setcanceltype(int type, int *oldtype);
-
-void pthread_testcancel(void);
-
-/* CLEANUP */
-
-void pthread_cleanup_push(void (*routine)(void*), void *arg);
-void pthread_cleanup_pop (int execute);
-
-void pthread_cleanup_push_defer_np(void (*routine)(void *), void *arg);
-void pthread_cleanup_pop_restore_np(int execute);
-
-/* FORK */
-
-pid_t pthread_atfork(void (*prepare)(void), void (*parent)(void),
-		     void (*child)(void));
-
-/* THREADS */
-int pthread_create (pthread_t *__thread,
-		const pthread_attr_t *__attr,
-		void *(*__start_routine) (void *),
-		void *__arg);
-
-void pthread_exit (void *__retval) __attribute__ ((__noreturn__));
-
-int pthread_join (pthread_t __th, void **__thread_return);
-
-int pthread_detach (pthread_t __th);
-
-pthread_t pthread_self (void);
-int pthread_equal (pthread_t __thread1, pthread_t __thread2);
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/pwd.h b/mdk-stage1/dietlibc/include/pwd.h
deleted file mode 100644
index e6fb5d0be..000000000
--- a/mdk-stage1/dietlibc/include/pwd.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _PWD_H
-#define _PWD_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-struct passwd {
-  char *pw_name;		/* Username.  */
-  char *pw_passwd;		/* Password.  */
-  uid_t pw_uid;			/* User ID.  */
-  gid_t pw_gid;			/* Group ID.  */
-  char *pw_gecos;		/* Real name.  */
-  char *pw_dir;			/* Home directory.  */
-  char *pw_shell;		/* Shell program.  */
-};
-
-extern struct passwd *getpwuid (uid_t __uid) __THROW;
-extern struct passwd *getpwnam (const char *__name) __THROW;
-
-extern struct passwd *getpwent(void) __THROW;
-extern void setpwent(void) __THROW;
-extern void endpwent(void) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/regex.h b/mdk-stage1/dietlibc/include/regex.h
deleted file mode 100644
index be609d9db..000000000
--- a/mdk-stage1/dietlibc/include/regex.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _REGEX_H
-#define _REGEX_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-typedef ptrdiff_t regoff_t;
-
-typedef struct {
-  regoff_t rm_so;
-  regoff_t rm_eo;
-} regmatch_t;
-
-#define REG_EXTENDED 1
-#define REG_ICASE 2
-#define REG_NOSUB 4
-#define REG_NEWLINE 8
-
-#define REG_NOTBOL 1
-#define REG_NOTEOL 2
-
-#define REG_NOMATCH -1
-
-#define RE_DUP_MAX 255
-
-struct __regex_t;
-
-typedef int (*matcher)(void*,const char*,int ofs,struct __regex_t *t,int plus,int eflags);
-
-typedef struct __regex_t {
-  struct regex {
-    matcher m;
-    void* next;
-    int pieces;
-    int num;
-    struct branch *b;
-  } r;
-  int brackets,cflags;
-  regmatch_t *l;
-} regex_t;
-
-int regcomp(regex_t *preg, const char *regex, int cflags) __THROW;
-int regexec(const regex_t *preg, const char *string, size_t nmatch, regmatch_t pmatch[], int eflags) __THROW;
-size_t regerror(int errcode, const regex_t *preg, char *errbuf, size_t errbuf_size) __THROW;
-void regfree(regex_t *preg) __THROW;
-
-enum __regex_errors {
-  REG_NOERROR,
-  REG_BADRPT, /* Invalid use of repetition operators such as using `*' as the first character. */
-  REG_BADBR, /* Invalid use of back reference operator. */
-  REG_EBRACE, /* Un-matched brace interval operators. */
-  REG_EBRACK, /* Un-matched bracket list operators. */
-  REG_ERANGE, /* Invalid use of the range operator, eg. the ending point of the
-		 range occurs  prior  to  the  starting point. */
-  REG_ECTYPE, /* Unknown character class name. */
-  REG_ECOLLATE, /* Invalid collating element. */
-  REG_EPAREN, /* Un-matched parenthesis group operators. */
-  REG_ESUBREG, /* Invalid back reference to a subexpression. */
-  REG_EEND, /* Non specific error.  This is not defined by POSIX.2. */
-  REG_EESCAPE, /* Trailing backslash. */
-  REG_BADPAT, /* Invalid use of pattern operators such as group or list. */
-  REG_ESIZE, /* Compiled  regular  expression  requires  a  pattern  buffer
-		larger than 64Kb.  This is not defined by POSIX.2. */
-  REG_ESPACE, /* regcomp ran out of space */
-};
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/resolv.h b/mdk-stage1/dietlibc/include/resolv.h
deleted file mode 100644
index 4e90799c2..000000000
--- a/mdk-stage1/dietlibc/include/resolv.h
+++ /dev/null
@@ -1 +0,0 @@
-void res_init(void);
diff --git a/mdk-stage1/dietlibc/include/rpc/auth.h b/mdk-stage1/dietlibc/include/rpc/auth.h
deleted file mode 100644
index 4aa7d21ce..000000000
--- a/mdk-stage1/dietlibc/include/rpc/auth.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/* @(#)auth.h	2.3 88/08/07 4.0 RPCSRC; from 1.17 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-/*
- * auth.h, Authentication interface.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * The data structures are completely opaque to the client.  The client
- * is required to pass a AUTH * to routines that create rpc
- * "sessions".
- */
-
-#ifndef _RPC_AUTH_H
-
-#define _RPC_AUTH_H	1
-#include <sys/cdefs.h>
-#include <rpc/xdr.h>
-
-__BEGIN_DECLS
-
-#define MAX_AUTH_BYTES	400
-#define MAXNETNAMELEN	255	/* maximum length of network user's name */
-
-/*
- * Status returned from authentication check
- */
-enum auth_stat {
-	AUTH_OK=0,
-	/*
-	 * failed at remote end
-	 */
-	AUTH_BADCRED=1,			/* bogus credentials (seal broken) */
-	AUTH_REJECTEDCRED=2,		/* client should begin new session */
-	AUTH_BADVERF=3,			/* bogus verifier (seal broken) */
-	AUTH_REJECTEDVERF=4,		/* verifier expired or was replayed */
-	AUTH_TOOWEAK=5,			/* rejected due to security reasons */
-	/*
-	 * failed locally
-	*/
-	AUTH_INVALIDRESP=6,		/* bogus response verifier */
-	AUTH_FAILED=7			/* some unknown reason */
-};
-
-union des_block {
-	struct {
-		u_int32_t high;
-		u_int32_t low;
-	} key;
-	char c[8];
-};
-typedef union des_block des_block;
-extern bool_t xdr_des_block (XDR *__xdrs, des_block *__blkp) __THROW;
-
-/*
- * Authentication info.  Opaque to client.
- */
-struct opaque_auth {
-	enum_t	oa_flavor;		/* flavor of auth */
-	caddr_t	oa_base;		/* address of more auth stuff */
-	u_int	oa_length;		/* not to exceed MAX_AUTH_BYTES */
-};
-
-/*
- * Auth handle, interface to client side authenticators.
- */
-typedef struct AUTH AUTH;
-struct AUTH {
-  struct opaque_auth ah_cred;
-  struct opaque_auth ah_verf;
-  union des_block ah_key;
-  struct auth_ops {
-    void (*ah_nextverf) (AUTH *);
-    int  (*ah_marshal) (AUTH *, XDR *);		/* nextverf & serialize */
-    int  (*ah_validate) (AUTH *, struct opaque_auth *);
-						/* validate verifier */
-    int  (*ah_refresh) (AUTH *);		/* refresh credentials */
-    void (*ah_destroy) (AUTH *); 	    	/* destroy this structure */
-  } *ah_ops;
-  caddr_t ah_private;
-};
-
-
-/*
- * Authentication ops.
- * The ops and the auth handle provide the interface to the authenticators.
- *
- * AUTH	*auth;
- * XDR	*xdrs;
- * struct opaque_auth verf;
- */
-#define AUTH_NEXTVERF(auth)		\
-		((*((auth)->ah_ops->ah_nextverf))(auth))
-#define auth_nextverf(auth)		\
-		((*((auth)->ah_ops->ah_nextverf))(auth))
-
-#define AUTH_MARSHALL(auth, xdrs)	\
-		((*((auth)->ah_ops->ah_marshal))(auth, xdrs))
-#define auth_marshall(auth, xdrs)	\
-		((*((auth)->ah_ops->ah_marshal))(auth, xdrs))
-
-#define AUTH_VALIDATE(auth, verfp)	\
-		((*((auth)->ah_ops->ah_validate))((auth), verfp))
-#define auth_validate(auth, verfp)	\
-		((*((auth)->ah_ops->ah_validate))((auth), verfp))
-
-#define AUTH_REFRESH(auth)		\
-		((*((auth)->ah_ops->ah_refresh))(auth))
-#define auth_refresh(auth)		\
-		((*((auth)->ah_ops->ah_refresh))(auth))
-
-#define AUTH_DESTROY(auth)		\
-		((*((auth)->ah_ops->ah_destroy))(auth))
-#define auth_destroy(auth)		\
-		((*((auth)->ah_ops->ah_destroy))(auth))
-
-
-extern struct opaque_auth _null_auth;
-
-
-/*
- * These are the various implementations of client side authenticators.
- */
-
-/*
- * Unix style authentication
- * AUTH *authunix_create(machname, uid, gid, len, aup_gids)
- *	char *machname;
- *	int uid;
- *	int gid;
- *	int len;
- *	int *aup_gids;
- */
-extern AUTH *authunix_create (char *__machname,uid_t __uid, gid_t __gid,
-			      int __len, gid_t *__aup_gids) __THROW;
-extern AUTH *authunix_create_default (void) __THROW;
-extern AUTH *authnone_create (void) __THROW;
-extern AUTH *authdes_create (const char *__servername, u_int __window,
-			     struct sockaddr *__syncaddr, des_block *__ckey)
-     __THROW;
-extern AUTH *authdes_pk_create (const char *, netobj *, u_int,
-				struct sockaddr *, des_block *) __THROW;
-
-
-#define AUTH_NONE	0		/* no authentication */
-#define	AUTH_NULL	0		/* backward compatibility */
-#define	AUTH_SYS	1		/* unix style (uid, gids) */
-#define	AUTH_UNIX	AUTH_SYS
-#define	AUTH_SHORT	2		/* short hand unix style */
-#define AUTH_DES	3		/* des style (encrypted timestamps) */
-#define AUTH_DH		AUTH_DES	/* Diffie-Hellman (this is DES) */
-#define AUTH_KERB       4               /* kerberos style */
-
-/*
- *  Netname manipulating functions
- *
- */
-extern int getnetname (char *) __THROW;
-extern int host2netname (char *, __const char *, __const char *) __THROW;
-extern int user2netname (char *, __const uid_t, __const char *) __THROW;
-extern int netname2user (__const char *, uid_t *, gid_t *, int *, gid_t *)
-     __THROW;
-extern int netname2host (__const char *, char *, __const int) __THROW;
-
-/*
- *
- * These routines interface to the keyserv daemon
- *
- */
-extern int key_decryptsession (char *, des_block *) __THROW;
-extern int key_decryptsession_pk (char *, netobj *, des_block *) __THROW;
-extern int key_encryptsession (char *, des_block *) __THROW;
-extern int key_encryptsession_pk (char *, netobj *, des_block *) __THROW;
-extern int key_gendes (des_block *) __THROW;
-extern int key_setsecret (char *) __THROW;
-extern int key_secretkey_is_set (void) __THROW;
-extern int key_get_conv (char *, des_block *) __THROW;
-
-/*
- * XDR an opaque authentication struct.
- */
-extern bool_t xdr_opaque_auth (XDR *, struct opaque_auth *) __THROW;
-
-__END_DECLS
-
-#endif /* rpc/auth.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/auth_des.h b/mdk-stage1/dietlibc/include/rpc/auth_des.h
deleted file mode 100644
index 198b299e7..000000000
--- a/mdk-stage1/dietlibc/include/rpc/auth_des.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/* Copyright (C) 1996, 1997, 1998, 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#ifndef _RPC_AUTH_DES_H
-#define _RPC_AUTH_DES_H	1
-
-#include <sys/cdefs.h>
-#include <rpc/auth.h>
-
-__BEGIN_DECLS
-
-/* There are two kinds of "names": fullnames and nicknames */
-enum authdes_namekind
-  {
-    ADN_FULLNAME,
-    ADN_NICKNAME
-  };
-
-/* A fullname contains the network name of the client,
-   a conversation key and the window */
-struct authdes_fullname
-  {
-    char *name;		/* network name of client, up to MAXNETNAMELEN */
-    des_block key;	/* conversation key */
-    uint32_t window;	/* associated window */
-  };
-
-/* A credential */
-struct authdes_cred
-  {
-    enum authdes_namekind adc_namekind;
-    struct authdes_fullname adc_fullname;
-    uint32_t adc_nickname;
-  };
-
-/* A timeval replacement for !32bit platforms */
-struct rpc_timeval
-  {
-    uint32_t tv_sec;            /* Seconds.  */
-    uint32_t tv_usec;           /* Microseconds.  */
-  };
-
-/* A des authentication verifier */
-struct authdes_verf
-  {
-    union
-      {
-	struct rpc_timeval adv_ctime;	/* clear time */
-	des_block adv_xtime;		/* crypt time */
-      }
-    adv_time_u;
-    uint32_t adv_int_u;
-  };
-
-/* des authentication verifier: client variety
-
-   adv_timestamp is the current time.
-   adv_winverf is the credential window + 1.
-   Both are encrypted using the conversation key. */
-#define adv_timestamp  adv_time_u.adv_ctime
-#define adv_xtimestamp adv_time_u.adv_xtime
-#define adv_winverf    adv_int_u
-
-/* des authentication verifier: server variety
-
-   adv_timeverf is the client's timestamp + client's window
-   adv_nickname is the server's nickname for the client.
-   adv_timeverf is encrypted using the conversation key. */
-#define adv_timeverf   adv_time_u.adv_ctime
-#define adv_xtimeverf  adv_time_u.adv_xtime
-#define adv_nickname   adv_int_u
-
-/* Map a des credential into a unix cred. */
-extern int authdes_getucred (__const struct authdes_cred * __adc,
-			     uid_t * __uid, gid_t * __gid,
-			     short *__grouplen, gid_t * __groups) __THROW;
-
-/* Get the public key for NAME and place it in KEY.  NAME can only be
-   up to MAXNETNAMELEN bytes long and the destination buffer KEY should
-   have HEXKEYBYTES + 1 bytes long to fit all characters from the key.  */
-extern int getpublickey (__const char *__name, char *__key) __THROW;
-
-/* Get the secret key for NAME and place it in KEY.  PASSWD is used to
-   decrypt the encrypted key stored in the database.  NAME can only be
-   up to MAXNETNAMELEN bytes long and the destination buffer KEY
-   should have HEXKEYBYTES + 1 bytes long to fit all characters from
-   the key.  */
-extern int getsecretkey (__const char *__name, char *__key,
-			 __const char *__passwd) __THROW;
-
-extern int rtime (struct sockaddr_in *__addrp, struct rpc_timeval *__timep,
-		  struct rpc_timeval *__timeout) __THROW;
-
-__END_DECLS
-
-
-#endif /* rpc/auth_des.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/auth_unix.h b/mdk-stage1/dietlibc/include/rpc/auth_unix.h
deleted file mode 100644
index 7a1bfa9f0..000000000
--- a/mdk-stage1/dietlibc/include/rpc/auth_unix.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* @(#)auth_unix.h	2.2 88/07/29 4.0 RPCSRC; from 1.8 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*      @(#)auth_unix.h 1.5 86/07/16 SMI      */
-
-/*
- * auth_unix.h, Protocol for UNIX style authentication parameters for RPC
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-/*
- * The system is very weak.  The client uses no encryption for  it
- * credentials and only sends null verifiers.  The server sends backs
- * null verifiers or optionally a verifier that suggests a new short hand
- * for the credentials.
- */
-
-#ifndef _RPC_AUTH_UNIX_H
-#define _RPC_AUTH_UNIX_H	1
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <rpc/types.h>
-#include <rpc/auth.h>
-#include <rpc/xdr.h>
-
-__BEGIN_DECLS
-
-/* The machine name is part of a credential; it may not exceed 255 bytes */
-#define MAX_MACHINE_NAME 255
-
-/* gids compose part of a credential; there may not be more than 16 of them */
-#define NGRPS 16
-
-/*
- * Unix style credentials.
- */
-struct authunix_parms
-  {
-    u_long aup_time;
-    char *aup_machname;
-    uid_t aup_uid;
-    gid_t aup_gid;
-    u_int aup_len;
-    gid_t *aup_gids;
-  };
-
-extern bool_t xdr_authunix_parms (XDR *__xdrs, struct authunix_parms *__p)
-     __THROW;
-
-/*
- * If a response verifier has flavor AUTH_SHORT,
- * then the body of the response verifier encapsulates the following structure;
- * again it is serialized in the obvious fashion.
- */
-struct short_hand_verf
-  {
-    struct opaque_auth new_cred;
-  };
-
-__END_DECLS
-
-#endif /* rpc/auth_unix.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/clnt.h b/mdk-stage1/dietlibc/include/rpc/clnt.h
deleted file mode 100644
index 60b0fafdf..000000000
--- a/mdk-stage1/dietlibc/include/rpc/clnt.h
+++ /dev/null
@@ -1,421 +0,0 @@
-/* @(#)clnt.h	2.1 88/07/29 4.0 RPCSRC; from 1.31 88/02/08 SMI*/
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-/*
- * clnt.h - Client side remote procedure call interface.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_CLNT_H
-#define _RPC_CLNT_H	1
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <rpc/types.h>
-#include <rpc/auth.h>
-#include <sys/un.h>
-
-__BEGIN_DECLS
-
-/*
- * Rpc calls return an enum clnt_stat.  This should be looked at more,
- * since each implementation is required to live with this (implementation
- * independent) list of errors.
- */
-enum clnt_stat {
-	RPC_SUCCESS=0,			/* call succeeded */
-	/*
-	 * local errors
-	 */
-	RPC_CANTENCODEARGS=1,		/* can't encode arguments */
-	RPC_CANTDECODERES=2,		/* can't decode results */
-	RPC_CANTSEND=3,			/* failure in sending call */
-	RPC_CANTRECV=4,			/* failure in receiving result */
-	RPC_TIMEDOUT=5,			/* call timed out */
-	/*
-	 * remote errors
-	 */
-	RPC_VERSMISMATCH=6,		/* rpc versions not compatible */
-	RPC_AUTHERROR=7,		/* authentication error */
-	RPC_PROGUNAVAIL=8,		/* program not available */
-	RPC_PROGVERSMISMATCH=9,		/* program version mismatched */
-	RPC_PROCUNAVAIL=10,		/* procedure unavailable */
-	RPC_CANTDECODEARGS=11,		/* decode arguments error */
-	RPC_SYSTEMERROR=12,		/* generic "other problem" */
-	RPC_NOBROADCAST = 21,		/* Broadcasting not supported */
-	/*
-	 * callrpc & clnt_create errors
-	 */
-	RPC_UNKNOWNHOST=13,		/* unknown host name */
-	RPC_UNKNOWNPROTO=17,		/* unknown protocol */
-	RPC_UNKNOWNADDR = 19,		/* Remote address unknown */
-
-	/*
-	 * rpcbind errors
-	 */
-	RPC_RPCBFAILURE=14,		/* portmapper failed in its call */
-#define RPC_PMAPFAILURE RPC_RPCBFAILURE
-	RPC_PROGNOTREGISTERED=15,	/* remote program is not registered */
-	RPC_N2AXLATEFAILURE = 22,	/* Name to addr translation failed */
-	/*
-	 * unspecified error
-	 */
-	RPC_FAILED=16,
-	RPC_INTR=18,
-	RPC_TLIERROR=20,
-	RPC_UDERROR=23,
-        /*
-         * asynchronous errors
-         */
-        RPC_INPROGRESS = 24,
-        RPC_STALERACHANDLE = 25
-};
-
-
-/*
- * Error info.
- */
-struct rpc_err {
-  enum clnt_stat re_status;
-  union {
-    int RE_errno;		/* related system error */
-    enum auth_stat RE_why;	/* why the auth error occurred */
-    struct {
-      u_long low;		/* lowest verion supported */
-      u_long high;		/* highest verion supported */
-    } RE_vers;
-    struct {			/* maybe meaningful if RPC_FAILED */
-      long s1;
-      long s2;
-    } RE_lb;			/* life boot & debugging only */
-  } ru;
-#define	re_errno	ru.RE_errno
-#define	re_why		ru.RE_why
-#define	re_vers		ru.RE_vers
-#define	re_lb		ru.RE_lb
-};
-
-
-/*
- * Client rpc handle.
- * Created by individual implementations, see e.g. rpc_udp.c.
- * Client is responsible for initializing auth, see e.g. auth_none.c.
- */
-typedef struct CLIENT CLIENT;
-struct CLIENT {
-  AUTH	*cl_auth;		 /* authenticator */
-  struct clnt_ops {
-    enum clnt_stat (*cl_call) (CLIENT *, u_long, xdrproc_t, caddr_t, xdrproc_t,
-			       caddr_t, struct timeval);
-			       	/* call remote procedure */
-    void (*cl_abort) (void);	/* abort a call */
-    void (*cl_geterr) (CLIENT *, struct rpc_err *);
-				/* get specific error code */
-    bool_t (*cl_freeres) (CLIENT *, xdrproc_t, caddr_t);
-				/* frees results */
-    void (*cl_destroy) (CLIENT *); /* destroy this structure */
-    bool_t (*cl_control) (CLIENT *, int, char *);
-				/* the ioctl() of rpc */
-  } *cl_ops;
-  caddr_t cl_private;		/* private stuff */
-};
-
-
-/*
- * client side rpc interface ops
- *
- * Parameter types are:
- *
- */
-
-/*
- * enum clnt_stat
- * CLNT_CALL(rh, proc, xargs, argsp, xres, resp, timeout)
- * 	CLIENT *rh;
- *	u_long proc;
- *	xdrproc_t xargs;
- *	caddr_t argsp;
- *	xdrproc_t xres;
- *	caddr_t resp;
- *	struct timeval timeout;
- */
-#define	CLNT_CALL(rh, proc, xargs, argsp, xres, resp, secs)	\
-	((*(rh)->cl_ops->cl_call)(rh, proc, xargs, argsp, xres, resp, secs))
-#define	clnt_call(rh, proc, xargs, argsp, xres, resp, secs)	\
-	((*(rh)->cl_ops->cl_call)(rh, proc, xargs, argsp, xres, resp, secs))
-
-/*
- * void
- * CLNT_ABORT(rh);
- * 	CLIENT *rh;
- */
-#define	CLNT_ABORT(rh)	((*(rh)->cl_ops->cl_abort)(rh))
-#define	clnt_abort(rh)	((*(rh)->cl_ops->cl_abort)(rh))
-
-/*
- * struct rpc_err
- * CLNT_GETERR(rh);
- * 	CLIENT *rh;
- */
-#define	CLNT_GETERR(rh,errp)	((*(rh)->cl_ops->cl_geterr)(rh, errp))
-#define	clnt_geterr(rh,errp)	((*(rh)->cl_ops->cl_geterr)(rh, errp))
-
-
-/*
- * bool_t
- * CLNT_FREERES(rh, xres, resp);
- * 	CLIENT *rh;
- *	xdrproc_t xres;
- *	caddr_t resp;
- */
-#define	CLNT_FREERES(rh,xres,resp) ((*(rh)->cl_ops->cl_freeres)(rh,xres,resp))
-#define	clnt_freeres(rh,xres,resp) ((*(rh)->cl_ops->cl_freeres)(rh,xres,resp))
-
-/*
- * bool_t
- * CLNT_CONTROL(cl, request, info)
- *      CLIENT *cl;
- *      u_int request;
- *      char *info;
- */
-#define	CLNT_CONTROL(cl,rq,in) ((*(cl)->cl_ops->cl_control)(cl,rq,in))
-#define	clnt_control(cl,rq,in) ((*(cl)->cl_ops->cl_control)(cl,rq,in))
-
-/*
- * control operations that apply to all transports
- *
- * Note: options marked XXX are no-ops in this implementation of RPC.
- * The are present in TI-RPC but can't be implemented here since they
- * depend on the presence of STREAMS/TLI, which we don't have.
- */
-#define CLSET_TIMEOUT        1    /* set timeout (timeval) */
-#define CLGET_TIMEOUT        2    /* get timeout (timeval) */
-#define CLGET_SERVER_ADDR    3    /* get server's address (sockaddr) */
-#define CLGET_FD             6    /* get connections file descriptor */
-#define CLGET_SVC_ADDR       7    /* get server's address (netbuf)      XXX */
-#define CLSET_FD_CLOSE       8    /* close fd while clnt_destroy */
-#define CLSET_FD_NCLOSE      9    /* Do not close fd while clnt_destroy*/
-#define CLGET_XID            10   /* Get xid */
-#define CLSET_XID            11   /* Set xid */
-#define CLGET_VERS           12   /* Get version number */
-#define CLSET_VERS           13   /* Set version number */
-#define CLGET_PROG           14   /* Get program number */
-#define CLSET_PROG           15   /* Set program number */
-#define CLSET_SVC_ADDR       16   /* get server's address (netbuf)      XXX */
-#define CLSET_PUSH_TIMOD     17   /* push timod if not already present  XXX */
-#define CLSET_POP_TIMOD      18   /* pop timod                          XXX */
-/*
- * Connectionless only control operations
- */
-#define CLSET_RETRY_TIMEOUT	4	/* set retry timeout (timeval) */
-#define CLGET_RETRY_TIMEOUT	5	/* get retry timeout (timeval) */
-
-/*
- * void
- * CLNT_DESTROY(rh);
- * 	CLIENT *rh;
- */
-#define	CLNT_DESTROY(rh)	((*(rh)->cl_ops->cl_destroy)(rh))
-#define	clnt_destroy(rh)	((*(rh)->cl_ops->cl_destroy)(rh))
-
-
-/*
- * RPCTEST is a test program which is accessible on every rpc
- * transport/port.  It is used for testing, performance evaluation,
- * and network administration.
- */
-
-#define RPCTEST_PROGRAM		((u_long)1)
-#define RPCTEST_VERSION		((u_long)1)
-#define RPCTEST_NULL_PROC	((u_long)2)
-#define RPCTEST_NULL_BATCH_PROC	((u_long)3)
-
-/*
- * By convention, procedure 0 takes null arguments and returns them
- */
-
-#define NULLPROC ((u_long)0)
-
-/*
- * Below are the client handle creation routines for the various
- * implementations of client side rpc.  They can return NULL if a
- * creation failure occurs.
- */
-
-/*
- * Memory based rpc (for speed check and testing)
- * CLIENT *
- * clntraw_create(prog, vers)
- *	u_long prog;
- *	u_long vers;
- */
-extern CLIENT *clntraw_create (__const u_long __prog, __const u_long __vers)
-     __THROW;
-
-
-/*
- * Generic client creation routine. Supported protocols are "udp", "tcp" and
- * "unix"
- * CLIENT *
- * clnt_create(host, prog, vers, prot)
- *	char *host; 	-- hostname
- *	u_long prog;	-- program number
- *	u_ong vers;	-- version number
- *	char *prot;	-- protocol
- */
-extern CLIENT *clnt_create (__const char *__host, __const u_long __prog,
-			    __const u_long __vers, __const char *__prot)
-     __THROW;
-
-
-/*
- * TCP based rpc
- * CLIENT *
- * clnttcp_create(raddr, prog, vers, sockp, sendsz, recvsz)
- *	struct sockaddr_in *raddr;
- *	u_long prog;
- *	u_long version;
- *	register int *sockp;
- *	u_int sendsz;
- *	u_int recvsz;
- */
-extern CLIENT *clnttcp_create (struct sockaddr_in *__raddr, u_long __prog,
-			       u_long __version, int *__sockp, u_int __sendsz,
-			       u_int __recvsz) __THROW;
-
-/*
- * UDP based rpc.
- * CLIENT *
- * clntudp_create(raddr, program, version, wait, sockp)
- *	struct sockaddr_in *raddr;
- *	u_long program;
- *	u_long version;
- *	struct timeval wait_resend;
- *	int *sockp;
- *
- * Same as above, but you specify max packet sizes.
- * CLIENT *
- * clntudp_bufcreate(raddr, program, version, wait, sockp, sendsz, recvsz)
- *	struct sockaddr_in *raddr;
- *	u_long program;
- *	u_long version;
- *	struct timeval wait_resend;
- *	int *sockp;
- *	u_int sendsz;
- *	u_int recvsz;
- */
-extern CLIENT *clntudp_create (struct sockaddr_in *__raddr, u_long __program,
-			       u_long __version, struct timeval __wait_resend,
-			       int *__sockp) __THROW;
-extern CLIENT *clntudp_bufcreate (struct sockaddr_in *__raddr,
-				  u_long __program, u_long __version,
-				  struct timeval __wait_resend, int *__sockp,
-				  u_int __sendsz, u_int __recvsz) __THROW;
-
-
-
-
-/*
- * AF_UNIX based rpc
- * CLIENT *
- * clntunix_create(raddr, prog, vers, sockp, sendsz, recvsz)
- *      struct sockaddr_un *raddr;
- *      u_long prog;
- *      u_long version;
- *      register int *sockp;
- *      u_int sendsz;
- *      u_int recvsz;
- */
-extern CLIENT *clntunix_create  (struct sockaddr_un *__raddr, u_long __program,
-				 u_long __version, int *__sockp,
-				 u_int __sendsz, u_int __recvsz) __THROW;
-
-
-extern int callrpc (__const char *__host, __const u_long __prognum,
-		    __const u_long __versnum, __const u_long __procnum,
-		    __const xdrproc_t __inproc, __const char *__in,
-		    __const xdrproc_t __outproc, char *__out) __THROW;
-extern int _rpc_dtablesize (void) __THROW;
-
-/*
- * Print why creation failed
- */
-extern void clnt_pcreateerror (__const char *__msg) __THROW;	/* stderr */
-extern char *clnt_spcreateerror(__const char *__msg) __THROW;	/* string */
-
-/*
- * Like clnt_perror(), but is more verbose in its output
- */
-extern void clnt_perrno (enum clnt_stat __num) __THROW;		/* stderr */
-
-/*
- * Print an English error message, given the client error code
- */
-extern void clnt_perror (CLIENT *__clnt, __const char *__msg) __THROW;
-							/* stderr */
-extern char *clnt_sperror (CLIENT *__clnt, __const char *__msg) __THROW;
-							/* string */
-
-/*
- * If a creation fails, the following allows the user to figure out why.
- */
-struct rpc_createerr {
-	enum clnt_stat cf_stat;
-	struct rpc_err cf_error; /* useful when cf_stat == RPC_PMAPFAILURE */
-};
-
-extern struct rpc_createerr rpc_createerr;
-
-
-
-/*
- * Copy error message to buffer.
- */
-extern char *clnt_sperrno (enum clnt_stat __num) __THROW;	/* string */
-
-/*
- * get the port number on the host for the rpc program,version and proto
- */
-extern int getrpcport (__const char * __host, u_long __prognum,
-		       u_long __versnum, u_int proto) __THROW;
-
-/*
- * get the local host's IP address without consulting
- * name service library functions
- */
-extern void get_myaddress (struct sockaddr_in *) __THROW;
-
-#define UDPMSGSIZE	8800	/* rpc imposed limit on udp msg size */
-#define RPCSMALLMSGSIZE	400	/* a more reasonable packet size */
-
-__END_DECLS
-
-#endif /* rpc/clnt.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/des_crypt.h b/mdk-stage1/dietlibc/include/rpc/des_crypt.h
deleted file mode 100644
index 6a65887d3..000000000
--- a/mdk-stage1/dietlibc/include/rpc/des_crypt.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * @(#)des_crypt.h	2.1 88/08/11 4.0 RPCSRC;	from 1.4 88/02/08 (C) 1986 SMI
- *
- * des_crypt.h, des library routine interface
- * Copyright (C) 1986, Sun Microsystems, Inc.
- */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-#ifndef __DES_CRYPT_H__
-#define __DES_CRYPT_H__ 1
-
-#include <features.h>
-
-__BEGIN_DECLS
-
-#define DES_MAXDATA 8192	/* max bytes encrypted in one call */
-#define DES_DIRMASK (1 << 0)
-#define DES_ENCRYPT (0*DES_DIRMASK)	/* Encrypt */
-#define DES_DECRYPT (1*DES_DIRMASK)	/* Decrypt */
-
-
-#define DES_DEVMASK (1 << 1)
-#define	DES_HW (0*DES_DEVMASK)	/* Use hardware device */
-#define DES_SW (1*DES_DEVMASK)	/* Use software device */
-
-
-#define DESERR_NONE 0	/* succeeded */
-#define DESERR_NOHWDEVICE 1	/* succeeded, but hw device not available */
-#define DESERR_HWERROR 2	/* failed, hardware/driver error */
-#define DESERR_BADPARAM 3	/* failed, bad parameter to call */
-
-#define DES_FAILED(err) \
-	((err) > DESERR_NOHWDEVICE)
-
-/*
- * cbc_crypt()
- * ecb_crypt()
- *
- * Encrypt (or decrypt) len bytes of a buffer buf.
- * The length must be a multiple of eight.
- * The key should have odd parity in the low bit of each byte.
- * ivec is the input vector, and is updated to the new one (cbc only).
- * The mode is created by oring together the appropriate parameters.
- * DESERR_NOHWDEVICE is returned if DES_HW was specified but
- * there was no hardware to do it on (the data will still be
- * encrypted though, in software).
- */
-
-
-/*
- * Cipher Block Chaining mode
- */
-extern int cbc_crypt (char *__key, char *__buf, unsigned __len,
-		      unsigned __mode, char *__ivec) __THROW;
-
-/*
- * Electronic Code Book mode
- */
-extern int ecb_crypt (char *__key, char *__buf, unsigned __len,
-		      unsigned __mode) __THROW;
-
-/*
- * Set des parity for a key.
- * DES parity is odd and in the low bit of each byte
- */
-extern void des_setparity (char *__key) __THROW;
-
-__END_DECLS
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/rpc/key_prot.h b/mdk-stage1/dietlibc/include/rpc/key_prot.h
deleted file mode 100644
index 3e2eb7208..000000000
--- a/mdk-stage1/dietlibc/include/rpc/key_prot.h
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * Please do not edit this file.
- * It was generated using rpcgen.
- */
-
-#ifndef _KEY_PROT_H_RPCGEN
-#define _KEY_PROT_H_RPCGEN
-
-#include <rpc/rpc.h>
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if 0
-#pragma ident	"@(#)key_prot.x	1.7	94/04/29 SMI"
-#endif
-/* Copyright (c)  1990, 1991 Sun Microsystems, Inc. */
-
-/* 
- * Compiled from key_prot.x using rpcgen.
- * DO NOT EDIT THIS FILE!
- * This is NOT source code!
- */
-#define PROOT 3
-#define HEXMODULUS "d4a0ba0250b6fd2ec626e7efd637df76c716e22d0944b88b"
-#define HEXKEYBYTES 48
-#define KEYSIZE 192
-#define KEYBYTES 24
-#define KEYCHECKSUMSIZE 16
-
-enum keystatus {
-	KEY_SUCCESS = 0,
-	KEY_NOSECRET = 1,
-	KEY_UNKNOWN = 2,
-	KEY_SYSTEMERR = 3,
-};
-typedef enum keystatus keystatus;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_keystatus(XDR *, keystatus*);
-#elif __STDC__ 
-extern  bool_t xdr_keystatus(XDR *, keystatus*);
-#else /* Old Style C */ 
-bool_t xdr_keystatus();
-#endif /* Old Style C */ 
-
-
-typedef char keybuf[HEXKEYBYTES];
-#ifdef __cplusplus 
-extern "C" bool_t xdr_keybuf(XDR *, keybuf);
-#elif __STDC__ 
-extern  bool_t xdr_keybuf(XDR *, keybuf);
-#else /* Old Style C */ 
-bool_t xdr_keybuf();
-#endif /* Old Style C */ 
-
-
-typedef char *netnamestr;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_netnamestr(XDR *, netnamestr*);
-#elif __STDC__ 
-extern  bool_t xdr_netnamestr(XDR *, netnamestr*);
-#else /* Old Style C */ 
-bool_t xdr_netnamestr();
-#endif /* Old Style C */ 
-
-
-struct cryptkeyarg {
-	netnamestr remotename;
-	des_block deskey;
-};
-typedef struct cryptkeyarg cryptkeyarg;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_cryptkeyarg(XDR *, cryptkeyarg*);
-#elif __STDC__ 
-extern  bool_t xdr_cryptkeyarg(XDR *, cryptkeyarg*);
-#else /* Old Style C */ 
-bool_t xdr_cryptkeyarg();
-#endif /* Old Style C */ 
-
-
-struct cryptkeyarg2 {
-	netnamestr remotename;
-	netobj remotekey;
-	des_block deskey;
-};
-typedef struct cryptkeyarg2 cryptkeyarg2;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_cryptkeyarg2(XDR *, cryptkeyarg2*);
-#elif __STDC__ 
-extern  bool_t xdr_cryptkeyarg2(XDR *, cryptkeyarg2*);
-#else /* Old Style C */ 
-bool_t xdr_cryptkeyarg2();
-#endif /* Old Style C */ 
-
-
-struct cryptkeyres {
-	keystatus status;
-	union {
-		des_block deskey;
-	} cryptkeyres_u;
-};
-typedef struct cryptkeyres cryptkeyres;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_cryptkeyres(XDR *, cryptkeyres*);
-#elif __STDC__ 
-extern  bool_t xdr_cryptkeyres(XDR *, cryptkeyres*);
-#else /* Old Style C */ 
-bool_t xdr_cryptkeyres();
-#endif /* Old Style C */ 
-
-#define MAXGIDS 16
-
-struct unixcred {
-	u_int uid;
-	u_int gid;
-	struct {
-		u_int gids_len;
-		u_int *gids_val;
-	} gids;
-};
-typedef struct unixcred unixcred;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_unixcred(XDR *, unixcred*);
-#elif __STDC__ 
-extern  bool_t xdr_unixcred(XDR *, unixcred*);
-#else /* Old Style C */ 
-bool_t xdr_unixcred();
-#endif /* Old Style C */ 
-
-
-struct getcredres {
-	keystatus status;
-	union {
-		unixcred cred;
-	} getcredres_u;
-};
-typedef struct getcredres getcredres;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_getcredres(XDR *, getcredres*);
-#elif __STDC__ 
-extern  bool_t xdr_getcredres(XDR *, getcredres*);
-#else /* Old Style C */ 
-bool_t xdr_getcredres();
-#endif /* Old Style C */ 
-
-
-struct key_netstarg {
-	keybuf st_priv_key;
-	keybuf st_pub_key;
-	netnamestr st_netname;
-};
-typedef struct key_netstarg key_netstarg;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_key_netstarg(XDR *, key_netstarg*);
-#elif __STDC__ 
-extern  bool_t xdr_key_netstarg(XDR *, key_netstarg*);
-#else /* Old Style C */ 
-bool_t xdr_key_netstarg();
-#endif /* Old Style C */ 
-
-
-struct key_netstres {
-	keystatus status;
-	union {
-		key_netstarg knet;
-	} key_netstres_u;
-};
-typedef struct key_netstres key_netstres;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_key_netstres(XDR *, key_netstres*);
-#elif __STDC__ 
-extern  bool_t xdr_key_netstres(XDR *, key_netstres*);
-#else /* Old Style C */ 
-bool_t xdr_key_netstres();
-#endif /* Old Style C */ 
-
-
-#ifndef opaque
-#define opaque char
-#endif
-
-
-#define KEY_PROG ((u_long)100029)
-#define KEY_VERS ((u_long)1)
-
-#ifdef __cplusplus
-#define KEY_SET ((u_long)1)
-extern "C" keystatus * key_set_1(opaque *, CLIENT *);
-extern "C" keystatus * key_set_1_svc(opaque *, struct svc_req *);
-#define KEY_ENCRYPT ((u_long)2)
-extern "C" cryptkeyres * key_encrypt_1(cryptkeyarg *, CLIENT *);
-extern "C" cryptkeyres * key_encrypt_1_svc(cryptkeyarg *, struct svc_req *);
-#define KEY_DECRYPT ((u_long)3)
-extern "C" cryptkeyres * key_decrypt_1(cryptkeyarg *, CLIENT *);
-extern "C" cryptkeyres * key_decrypt_1_svc(cryptkeyarg *, struct svc_req *);
-#define KEY_GEN ((u_long)4)
-extern "C" des_block * key_gen_1(void *, CLIENT *);
-extern "C" des_block * key_gen_1_svc(void *, struct svc_req *);
-#define KEY_GETCRED ((u_long)5)
-extern "C" getcredres * key_getcred_1(netnamestr *, CLIENT *);
-extern "C" getcredres * key_getcred_1_svc(netnamestr *, struct svc_req *);
-
-#elif __STDC__
-#define KEY_SET ((u_long)1)
-extern  keystatus * key_set_1(opaque *, CLIENT *);
-extern  keystatus * key_set_1_svc(opaque *, struct svc_req *);
-#define KEY_ENCRYPT ((u_long)2)
-extern  cryptkeyres * key_encrypt_1(cryptkeyarg *, CLIENT *);
-extern  cryptkeyres * key_encrypt_1_svc(cryptkeyarg *, struct svc_req *);
-#define KEY_DECRYPT ((u_long)3)
-extern  cryptkeyres * key_decrypt_1(cryptkeyarg *, CLIENT *);
-extern  cryptkeyres * key_decrypt_1_svc(cryptkeyarg *, struct svc_req *);
-#define KEY_GEN ((u_long)4)
-extern  des_block * key_gen_1(void *, CLIENT *);
-extern  des_block * key_gen_1_svc(void *, struct svc_req *);
-#define KEY_GETCRED ((u_long)5)
-extern  getcredres * key_getcred_1(netnamestr *, CLIENT *);
-extern  getcredres * key_getcred_1_svc(netnamestr *, struct svc_req *);
-
-#else /* Old Style C */ 
-#define KEY_SET ((u_long)1)
-extern  keystatus * key_set_1();
-extern  keystatus * key_set_1_svc();
-#define KEY_ENCRYPT ((u_long)2)
-extern  cryptkeyres * key_encrypt_1();
-extern  cryptkeyres * key_encrypt_1_svc();
-#define KEY_DECRYPT ((u_long)3)
-extern  cryptkeyres * key_decrypt_1();
-extern  cryptkeyres * key_decrypt_1_svc();
-#define KEY_GEN ((u_long)4)
-extern  des_block * key_gen_1();
-extern  des_block * key_gen_1_svc();
-#define KEY_GETCRED ((u_long)5)
-extern  getcredres * key_getcred_1();
-extern  getcredres * key_getcred_1_svc();
-#endif /* Old Style C */ 
-#define KEY_VERS2 ((u_long)2)
-
-#ifdef __cplusplus
-extern "C" keystatus * key_set_2(opaque *, CLIENT *);
-extern "C" keystatus * key_set_2_svc(opaque *, struct svc_req *);
-extern "C" cryptkeyres * key_encrypt_2(cryptkeyarg *, CLIENT *);
-extern "C" cryptkeyres * key_encrypt_2_svc(cryptkeyarg *, struct svc_req *);
-extern "C" cryptkeyres * key_decrypt_2(cryptkeyarg *, CLIENT *);
-extern "C" cryptkeyres * key_decrypt_2_svc(cryptkeyarg *, struct svc_req *);
-extern "C" des_block * key_gen_2(void *, CLIENT *);
-extern "C" des_block * key_gen_2_svc(void *, struct svc_req *);
-extern "C" getcredres * key_getcred_2(netnamestr *, CLIENT *);
-extern "C" getcredres * key_getcred_2_svc(netnamestr *, struct svc_req *);
-#define KEY_ENCRYPT_PK ((u_long)6)
-extern "C" cryptkeyres * key_encrypt_pk_2(cryptkeyarg2 *, CLIENT *);
-extern "C" cryptkeyres * key_encrypt_pk_2_svc(cryptkeyarg2 *, struct svc_req *);
-#define KEY_DECRYPT_PK ((u_long)7)
-extern "C" cryptkeyres * key_decrypt_pk_2(cryptkeyarg2 *, CLIENT *);
-extern "C" cryptkeyres * key_decrypt_pk_2_svc(cryptkeyarg2 *, struct svc_req *);
-#define KEY_NET_PUT ((u_long)8)
-extern "C" keystatus * key_net_put_2(key_netstarg *, CLIENT *);
-extern "C" keystatus * key_net_put_2_svc(key_netstarg *, struct svc_req *);
-#define KEY_NET_GET ((u_long)9)
-extern "C" key_netstres * key_net_get_2(void *, CLIENT *);
-extern "C" key_netstres * key_net_get_2_svc(void *, struct svc_req *);
-#define KEY_GET_CONV ((u_long)10)
-extern "C" cryptkeyres * key_get_conv_2(opaque *, CLIENT *);
-extern "C" cryptkeyres * key_get_conv_2_svc(opaque *, struct svc_req *);
-
-#elif __STDC__
-extern  keystatus * key_set_2(opaque *, CLIENT *);
-extern  keystatus * key_set_2_svc(opaque *, struct svc_req *);
-extern  cryptkeyres * key_encrypt_2(cryptkeyarg *, CLIENT *);
-extern  cryptkeyres * key_encrypt_2_svc(cryptkeyarg *, struct svc_req *);
-extern  cryptkeyres * key_decrypt_2(cryptkeyarg *, CLIENT *);
-extern  cryptkeyres * key_decrypt_2_svc(cryptkeyarg *, struct svc_req *);
-extern  des_block * key_gen_2(void *, CLIENT *);
-extern  des_block * key_gen_2_svc(void *, struct svc_req *);
-extern  getcredres * key_getcred_2(netnamestr *, CLIENT *);
-extern  getcredres * key_getcred_2_svc(netnamestr *, struct svc_req *);
-#define KEY_ENCRYPT_PK ((u_long)6)
-extern  cryptkeyres * key_encrypt_pk_2(cryptkeyarg2 *, CLIENT *);
-extern  cryptkeyres * key_encrypt_pk_2_svc(cryptkeyarg2 *, struct svc_req *);
-#define KEY_DECRYPT_PK ((u_long)7)
-extern  cryptkeyres * key_decrypt_pk_2(cryptkeyarg2 *, CLIENT *);
-extern  cryptkeyres * key_decrypt_pk_2_svc(cryptkeyarg2 *, struct svc_req *);
-#define KEY_NET_PUT ((u_long)8)
-extern  keystatus * key_net_put_2(key_netstarg *, CLIENT *);
-extern  keystatus * key_net_put_2_svc(key_netstarg *, struct svc_req *);
-#define KEY_NET_GET ((u_long)9)
-extern  key_netstres * key_net_get_2(void *, CLIENT *);
-extern  key_netstres * key_net_get_2_svc(void *, struct svc_req *);
-#define KEY_GET_CONV ((u_long)10)
-extern  cryptkeyres * key_get_conv_2(opaque *, CLIENT *);
-extern  cryptkeyres * key_get_conv_2_svc(opaque *, struct svc_req *);
-
-#else /* Old Style C */ 
-extern  keystatus * key_set_2();
-extern  keystatus * key_set_2_svc();
-extern  cryptkeyres * key_encrypt_2();
-extern  cryptkeyres * key_encrypt_2_svc();
-extern  cryptkeyres * key_decrypt_2();
-extern  cryptkeyres * key_decrypt_2_svc();
-extern  des_block * key_gen_2();
-extern  des_block * key_gen_2_svc();
-extern  getcredres * key_getcred_2();
-extern  getcredres * key_getcred_2_svc();
-#define KEY_ENCRYPT_PK ((u_long)6)
-extern  cryptkeyres * key_encrypt_pk_2();
-extern  cryptkeyres * key_encrypt_pk_2_svc();
-#define KEY_DECRYPT_PK ((u_long)7)
-extern  cryptkeyres * key_decrypt_pk_2();
-extern  cryptkeyres * key_decrypt_pk_2_svc();
-#define KEY_NET_PUT ((u_long)8)
-extern  keystatus * key_net_put_2();
-extern  keystatus * key_net_put_2_svc();
-#define KEY_NET_GET ((u_long)9)
-extern  key_netstres * key_net_get_2();
-extern  key_netstres * key_net_get_2_svc();
-#define KEY_GET_CONV ((u_long)10)
-extern  cryptkeyres * key_get_conv_2();
-extern  cryptkeyres * key_get_conv_2_svc();
-#endif /* Old Style C */ 
-
-#endif /* !_KEY_PROT_H_RPCGEN */
diff --git a/mdk-stage1/dietlibc/include/rpc/netdb.h b/mdk-stage1/dietlibc/include/rpc/netdb.h
deleted file mode 100644
index da4bddfc4..000000000
--- a/mdk-stage1/dietlibc/include/rpc/netdb.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* @(#)netdb.h	2.1 88/07/29 3.9 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*	@(#)rpc.h 1.8 87/07/24 SMI	*/
-
-/* Cleaned up for GNU C library roland@gnu.ai.mit.edu:
-   added multiple inclusion protection and use of <sys/cdefs.h>.
-   In GNU this file is #include'd by <netdb.h>.  */
-
-#ifndef _RPC_NETDB_H
-#define _RPC_NETDB_H	1
-
-#include <sys/cdefs.h>
-
-#define __need_size_t
-#include <stddef.h>
-
-__BEGIN_DECLS
-
-struct rpcent
-{
-  char *r_name;		/* Name of server for this rpc program.  */
-  char **r_aliases;	/* Alias list.  */
-  int r_number;		/* RPC program number.  */
-};
-
-extern void setrpcent (int __stayopen) __THROW;
-extern void endrpcent (void) __THROW;
-extern struct rpcent *getrpcbyname (__const char *__name) __THROW;
-extern struct rpcent *getrpcbynumber (int __number) __THROW;
-extern struct rpcent *getrpcent (void) __THROW;
-
-#ifdef __USE_MISC
-extern int getrpcbyname_r (__const char *__name, struct rpcent *__result_buf,
-			   char *__buffer, size_t __buflen,
-			   struct rpcent **__result) __THROW;
-
-extern int getrpcbynumber_r (int __number, struct rpcent *__result_buf,
-			     char *__buffer, size_t __buflen,
-			     struct rpcent **__result) __THROW;
-
-extern int getrpcent_r (struct rpcent *__result_buf, char *__buffer,
-			size_t __buflen, struct rpcent **__result) __THROW;
-#endif
-
-__END_DECLS
-
-#endif /* rpc/netdb.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/pmap_clnt.h b/mdk-stage1/dietlibc/include/rpc/pmap_clnt.h
deleted file mode 100644
index 68bc8d8ec..000000000
--- a/mdk-stage1/dietlibc/include/rpc/pmap_clnt.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* @(#)pmap_clnt.h	2.1 88/07/29 4.0 RPCSRC; from 1.11 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-/*
- * pmap_clnt.h
- * Supplies C routines to get to portmap services.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_PMAP_CLNT_H
-#define _RPC_PMAP_CLNT_H	1
-
-#include <sys/cdefs.h>
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <rpc/clnt.h>
-
-__BEGIN_DECLS
-
-typedef bool_t (*resultproc_t) (caddr_t resp, struct sockaddr_in *raddr);
-
-/*
- * Usage:
- *	success = pmap_set(program, version, protocol, port);
- *	success = pmap_unset(program, version);
- *	port = pmap_getport(address, program, version, protocol);
- *	head = pmap_getmaps(address);
- *	clnt_stat = pmap_rmtcall(address, program, version, procedure,
- *		xdrargs, argsp, xdrres, resp, tout, port_ptr)
- *		(works for udp only.)
- * 	clnt_stat = clnt_broadcast(program, version, procedure,
- *		xdrargs, argsp,	xdrres, resp, eachresult)
- *		(like pmap_rmtcall, except the call is broadcasted to all
- *		locally connected nets.  For each valid response received,
- *		the procedure eachresult is called.  Its form is:
- *	done = eachresult(resp, raddr)
- *		bool_t done;
- *		caddr_t resp;
- *		struct sockaddr_in raddr;
- *		where resp points to the results of the call and raddr is the
- *		address if the responder to the broadcast.
- */
-
-extern bool_t pmap_set (__const u_long __program, __const u_long __vers,
-			int __protocol, u_short __port) __THROW;
-extern bool_t pmap_unset (__const u_long __program, __const u_long __vers)
-     __THROW;
-extern struct pmaplist *pmap_getmaps (struct sockaddr_in *__address) __THROW;
-extern enum clnt_stat pmap_rmtcall (struct sockaddr_in *__addr,
-				    __const u_long __prog,
-				    __const u_long __vers,
-				    __const u_long __proc,
-				    xdrproc_t __xdrargs,
-				    caddr_t __argsp, xdrproc_t __xdrres,
-				    caddr_t __resp, struct timeval __tout,
-				    u_long *__port_ptr) __THROW;
-extern enum clnt_stat clnt_broadcast (__const u_long __prog,
-				      __const u_long __vers,
-				      __const u_long __proc, xdrproc_t __xargs,
-				      caddr_t __argsp, xdrproc_t __xresults,
-				      caddr_t __resultsp,
-				      resultproc_t __eachresult) __THROW;
-extern u_short pmap_getport (struct sockaddr_in *__address,
-			     __const u_long __program,
-			     __const u_long __version, u_int __protocol)
-     __THROW;
-
-__END_DECLS
-
-#endif /* rpc/pmap_clnt.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/pmap_prot.h b/mdk-stage1/dietlibc/include/rpc/pmap_prot.h
deleted file mode 100644
index fd7fb8e7e..000000000
--- a/mdk-stage1/dietlibc/include/rpc/pmap_prot.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/* @(#)pmap_prot.h	2.1 88/07/29 4.0 RPCSRC; from 1.14 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-/*
- * pmap_prot.h
- * Protocol for the local binder service, or pmap.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_PMAP_PROT_H
-#define _RPC_PMAP_PROT_H	1
-
-#include <sys/cdefs.h>
-
-#include <rpc/xdr.h>
-
-__BEGIN_DECLS
-
-/* The following procedures are supported by the protocol:
- *
- * PMAPPROC_NULL() returns ()
- * 	takes nothing, returns nothing
- *
- * PMAPPROC_SET(struct pmap) returns (bool_t)
- * 	TRUE is success, FALSE is failure.  Registers the tuple
- *	[prog, vers, prot, port].
- *
- * PMAPPROC_UNSET(struct pmap) returns (bool_t)
- *	TRUE is success, FALSE is failure.  Un-registers pair
- *	[prog, vers].  prot and port are ignored.
- *
- * PMAPPROC_GETPORT(struct pmap) returns (long unsigned).
- *	0 is failure.  Otherwise returns the port number where the pair
- *	[prog, vers] is registered.  It may lie!
- *
- * PMAPPROC_DUMP() RETURNS (struct pmaplist *)
- *
- * PMAPPROC_CALLIT(unsigned, unsigned, unsigned, string<>)
- * 	RETURNS (port, string<>);
- * usage: encapsulatedresults = PMAPPROC_CALLIT(prog, vers, proc, encapsulatedargs);
- * 	Calls the procedure on the local machine.  If it is not registered,
- *	this procedure is quite; ie it does not return error information!!!
- *	This procedure only is supported on rpc/udp and calls via
- *	rpc/udp.  This routine only passes null authentication parameters.
- *	This file has no interface to xdr routines for PMAPPROC_CALLIT.
- *
- * The service supports remote procedure calls on udp/ip or tcp/ip socket 111.
- */
-
-#define PMAPPORT		((u_short)111)
-#define PMAPPROG		((u_long)100000)
-#define PMAPVERS		((u_long)2)
-#define PMAPVERS_PROTO		((u_long)2)
-#define PMAPVERS_ORIG		((u_long)1)
-#define PMAPPROC_NULL		((u_long)0)
-#define PMAPPROC_SET		((u_long)1)
-#define PMAPPROC_UNSET		((u_long)2)
-#define PMAPPROC_GETPORT	((u_long)3)
-#define PMAPPROC_DUMP		((u_long)4)
-#define PMAPPROC_CALLIT		((u_long)5)
-
-struct pmap {
-	long unsigned pm_prog;
-	long unsigned pm_vers;
-	long unsigned pm_prot;
-	long unsigned pm_port;
-};
-
-extern bool_t xdr_pmap (XDR *__xdrs, struct pmap *__regs) __THROW;
-
-struct pmaplist {
-	struct pmap	pml_map;
-	struct pmaplist *pml_next;
-};
-
-extern bool_t xdr_pmaplist (XDR *__xdrs, struct pmaplist **__rp) __THROW;
-
-__END_DECLS
-
-#endif /* rpc/pmap_prot.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/pmap_rmt.h b/mdk-stage1/dietlibc/include/rpc/pmap_rmt.h
deleted file mode 100644
index 160f998ca..000000000
--- a/mdk-stage1/dietlibc/include/rpc/pmap_rmt.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* @(#)pmap_rmt.h	2.1 88/07/29 4.0 RPCSRC; from 1.2 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-/*
- * Structures and XDR routines for parameters to and replies from
- * the portmapper remote-call-service.
- *
- * Copyright (C) 1986, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_PMAP_RMT_H
-#define _RPC_PMAP_RMT_H	1
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-
-__BEGIN_DECLS
-
-struct rmtcallargs {
-	u_long prog, vers, proc, arglen;
-	caddr_t args_ptr;
-	xdrproc_t xdr_args;
-};
-
-extern bool_t xdr_rmtcall_args (XDR *__xdrs, struct rmtcallargs *__crp)
-     __THROW;
-
-struct rmtcallres {
-	u_long *port_ptr;
-	u_long resultslen;
-	caddr_t results_ptr;
-	xdrproc_t xdr_results;
-};
-
-extern bool_t xdr_rmtcallres (XDR *__xdrs, struct rmtcallres *__crp) __THROW;
-
-__END_DECLS
-
-#endif /* rpc/pmap_rmt.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/rpc.h b/mdk-stage1/dietlibc/include/rpc/rpc.h
deleted file mode 100644
index 20b341d74..000000000
--- a/mdk-stage1/dietlibc/include/rpc/rpc.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* @(#)rpc.h	2.3 88/08/10 4.0 RPCSRC; from 1.9 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-/*
- * rpc.h, Just includes the billions of rpc header files necessary to
- * do remote procedure calling.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_RPC_H
-#define _RPC_RPC_H 1
-
-#include <rpc/types.h>		/* some typedefs */
-#include <netinet/in.h>
-
-/* external data representation interfaces */
-#include <rpc/xdr.h>		/* generic (de)serializer */
-
-/* Client side only authentication */
-#include <rpc/auth.h>		/* generic authenticator (client side) */
-
-/* Client side (mostly) remote procedure call */
-#include <rpc/clnt.h>		/* generic rpc stuff */
-
-/* semi-private protocol headers */
-#include <rpc/rpc_msg.h>	/* protocol for rpc messages */
-#include <rpc/auth_unix.h>	/* protocol for unix style cred */
-#include <rpc/auth_des.h>	/* protocol for des style cred */
-
-/* Server side only remote procedure callee */
-#include <rpc/svc.h>		/* service manager and multiplexer */
-#include <rpc/svc_auth.h>	/* service side authenticator */
-
-/*
- * COMMENT OUT THE NEXT INCLUDE IF RUNNING ON SUN OS OR ON A VERSION
- * OF UNIX BASED ON NFSSRC.  These systems will already have the structures
- * defined by <rpc/netdb.h> included in <netdb.h>.
- */
-/* routines for parsing /etc/rpc */
-#include <rpc/netdb.h>		/* structures and routines to parse /etc/rpc */
-
-int bindresvport(int sd, struct sockaddr_in* sin) __THROW;
-
-#endif /* rpc/rpc.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/rpc_des.h b/mdk-stage1/dietlibc/include/rpc/rpc_des.h
deleted file mode 100644
index 0f36d1697..000000000
--- a/mdk-stage1/dietlibc/include/rpc/rpc_des.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*
- * Generic DES driver interface
- * Keep this file hardware independent!
- * Copyright (c) 1986 by Sun Microsystems, Inc.
- */
-
-#ifndef _DES_H
-#define _DES_H
-
-#include <sys/types.h>
-
-#define DES_MAXLEN 	65536	/* maximum # of bytes to encrypt  */
-#define DES_QUICKLEN	16	/* maximum # of bytes to encrypt quickly */
-
-enum desdir
-  {
-    ENCRYPT, DECRYPT
-  };
-enum desmode
-  {
-    CBC, ECB
-  };
-
-/*
- * parameters to ioctl call
- */
-struct desparams
-  {
-    u_char des_key[8];		/* key (with low bit parity) */
-    enum desdir des_dir;	/* direction */
-    enum desmode des_mode;	/* mode */
-    u_char des_ivec[8];		/* input vector */
-    unsigned des_len;		/* number of bytes to crypt */
-    union
-      {
-	u_char UDES_data[DES_QUICKLEN];
-	u_char *UDES_buf;
-      }
-    UDES;
-#define des_data UDES.UDES_data	/* direct data here if quick */
-#define des_buf	UDES.UDES_buf	/* otherwise, pointer to data */
-  };
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/rpc/rpc_msg.h b/mdk-stage1/dietlibc/include/rpc/rpc_msg.h
deleted file mode 100644
index 636d60ea9..000000000
--- a/mdk-stage1/dietlibc/include/rpc/rpc_msg.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/* @(#)rpc_msg.h	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*      @(#)rpc_msg.h 1.7 86/07/16 SMI      */
-
-#ifndef _RPC_MSG_H
-#define _RPC_MSG_H 1
-
-#include <sys/cdefs.h>
-
-#include <rpc/xdr.h>
-#include <rpc/clnt.h>
-
-/*
- * rpc_msg.h
- * rpc message definition
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#define RPC_MSG_VERSION		((u_long) 2)
-#define RPC_SERVICE_PORT	((u_short) 2048)
-
-__BEGIN_DECLS
-
-/*
- * Bottom up definition of an rpc message.
- * NOTE: call and reply use the same overall struct but
- * different parts of unions within it.
- */
-
-enum msg_type {
-	CALL=0,
-	REPLY=1
-};
-
-enum reply_stat {
-	MSG_ACCEPTED=0,
-	MSG_DENIED=1
-};
-
-enum accept_stat {
-	SUCCESS=0,
-	PROG_UNAVAIL=1,
-	PROG_MISMATCH=2,
-	PROC_UNAVAIL=3,
-	GARBAGE_ARGS=4,
-	SYSTEM_ERR=5
-};
-
-enum reject_stat {
-	RPC_MISMATCH=0,
-	AUTH_ERROR=1
-};
-
-/*
- * Reply part of an rpc exchange
- */
-
-/*
- * Reply to an rpc request that was accepted by the server.
- * Note: there could be an error even though the request was
- * accepted.
- */
-struct accepted_reply {
-	struct opaque_auth	ar_verf;
-	enum accept_stat	ar_stat;
-	union {
-		struct {
-			u_long	low;
-			u_long	high;
-		} AR_versions;
-		struct {
-			caddr_t	where;
-			xdrproc_t proc;
-		} AR_results;
-		/* and many other null cases */
-	} ru;
-#define	ar_results	ru.AR_results
-#define	ar_vers		ru.AR_versions
-};
-
-/*
- * Reply to an rpc request that was rejected by the server.
- */
-struct rejected_reply {
-	enum reject_stat rj_stat;
-	union {
-		struct {
-			u_long low;
-			u_long high;
-		} RJ_versions;
-		enum auth_stat RJ_why;  /* why authentication did not work */
-	} ru;
-#define	rj_vers	ru.RJ_versions
-#define	rj_why	ru.RJ_why
-};
-
-/*
- * Body of a reply to an rpc request.
- */
-struct reply_body {
-	enum reply_stat rp_stat;
-	union {
-		struct accepted_reply RP_ar;
-		struct rejected_reply RP_dr;
-	} ru;
-#define	rp_acpt	ru.RP_ar
-#define	rp_rjct	ru.RP_dr
-};
-
-/*
- * Body of an rpc request call.
- */
-struct call_body {
-	u_long cb_rpcvers;	/* must be equal to two */
-	u_long cb_prog;
-	u_long cb_vers;
-	u_long cb_proc;
-	struct opaque_auth cb_cred;
-	struct opaque_auth cb_verf; /* protocol specific - provided by client */
-};
-
-/*
- * The rpc message
- */
-struct rpc_msg {
-	u_long			rm_xid;
-	enum msg_type		rm_direction;
-	union {
-		struct call_body RM_cmb;
-		struct reply_body RM_rmb;
-	} ru;
-#define	rm_call		ru.RM_cmb
-#define	rm_reply	ru.RM_rmb
-};
-#define	acpted_rply	ru.RM_rmb.ru.RP_ar
-#define	rjcted_rply	ru.RM_rmb.ru.RP_dr
-
-
-/*
- * XDR routine to handle a rpc message.
- * xdr_callmsg(xdrs, cmsg)
- * 	XDR *xdrs;
- * 	struct rpc_msg *cmsg;
- */
-extern bool_t	xdr_callmsg (XDR *__xdrs, struct rpc_msg *__cmsg) __THROW;
-
-/*
- * XDR routine to pre-serialize the static part of a rpc message.
- * xdr_callhdr(xdrs, cmsg)
- * 	XDR *xdrs;
- * 	struct rpc_msg *cmsg;
- */
-extern bool_t	xdr_callhdr (XDR *__xdrs, struct rpc_msg *__cmsg) __THROW;
-
-/*
- * XDR routine to handle a rpc reply.
- * xdr_replymsg(xdrs, rmsg)
- * 	XDR *xdrs;
- * 	struct rpc_msg *rmsg;
- */
-extern bool_t	xdr_replymsg (XDR *__xdrs, struct rpc_msg *__rmsg) __THROW;
-
-/*
- * Fills in the error part of a reply message.
- * _seterr_reply(msg, error)
- * 	struct rpc_msg *msg;
- * 	struct rpc_err *error;
- */
-extern void	_seterr_reply (struct rpc_msg *__msg, struct rpc_err *__error)
-     __THROW;
-
-__END_DECLS
-
-#endif /* rpc/rpc_msg.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/svc.h b/mdk-stage1/dietlibc/include/rpc/svc.h
deleted file mode 100644
index 27c997dde..000000000
--- a/mdk-stage1/dietlibc/include/rpc/svc.h
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-/*
- * svc.h, Server-side remote procedure call interface.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_SVC_H
-#define _RPC_SVC_H 1
-
-#include <sys/cdefs.h>
-#include <rpc/rpc_msg.h>
-
-__BEGIN_DECLS
-
-/*
- * This interface must manage two items concerning remote procedure calling:
- *
- * 1) An arbitrary number of transport connections upon which rpc requests
- * are received.  The two most notable transports are TCP and UDP;  they are
- * created and registered by routines in svc_tcp.c and svc_udp.c, respectively;
- * they in turn call xprt_register and xprt_unregister.
- *
- * 2) An arbitrary number of locally registered services.  Services are
- * described by the following four data: program number, version number,
- * "service dispatch" function, a transport handle, and a boolean that
- * indicates whether or not the exported program should be registered with a
- * local binder service;  if true the program's number and version and the
- * port number from the transport handle are registered with the binder.
- * These data are registered with the rpc svc system via svc_register.
- *
- * A service's dispatch function is called whenever an rpc request comes in
- * on a transport.  The request's program and version numbers must match
- * those of the registered service.  The dispatch function is passed two
- * parameters, struct svc_req * and SVCXPRT *, defined below.
- */
-
-enum xprt_stat {
-	XPRT_DIED,
-	XPRT_MOREREQS,
-	XPRT_IDLE
-};
-
-/*
- * Server side transport handle
- */
-typedef struct SVCXPRT SVCXPRT;
-struct SVCXPRT {
-  int xp_sock;
-  u_short xp_port;		/* associated port number */
-  const struct xp_ops {
-    bool_t	(*xp_recv) (SVCXPRT *__xprt, struct rpc_msg *__msg);
-				/* receive incoming requests */
-    enum xprt_stat (*xp_stat) (SVCXPRT *__xprt);
-				/* get transport status */
-    bool_t	(*xp_getargs) (SVCXPRT *__xprt, xdrproc_t __xdr_args,
-			       caddr_t args_ptr); /* get arguments */
-    bool_t	(*xp_reply) (SVCXPRT *__xprt, struct rpc_msg *__msg);
-				/* send reply */
-    bool_t	(*xp_freeargs) (SVCXPRT *__xprt, xdrproc_t __xdr_args,
-				caddr_t args_ptr);
-				/* free mem allocated for args */
-    void	(*xp_destroy) (SVCXPRT *__xprt);
-				/* destroy this struct */
-  } *xp_ops;
-  int		xp_addrlen;	 /* length of remote address */
-  struct sockaddr_in xp_raddr;	 /* remote address */
-  struct opaque_auth xp_verf;	 /* raw response verifier */
-  caddr_t		xp_p1;		 /* private */
-  caddr_t		xp_p2;		 /* private */
-  char		xp_pad [256];	/* padding, internal use */
-};
-
-/*
- *  Approved way of getting address of caller
- */
-#define svc_getcaller(x) (&(x)->xp_raddr)
-
-/*
- * Operations defined on an SVCXPRT handle
- *
- * SVCXPRT		*xprt;
- * struct rpc_msg	*msg;
- * xdrproc_t		 xargs;
- * caddr_t		 argsp;
- */
-#define SVC_RECV(xprt, msg)				\
-	(*(xprt)->xp_ops->xp_recv)((xprt), (msg))
-#define svc_recv(xprt, msg)				\
-	(*(xprt)->xp_ops->xp_recv)((xprt), (msg))
-
-#define SVC_STAT(xprt)					\
-	(*(xprt)->xp_ops->xp_stat)(xprt)
-#define svc_stat(xprt)					\
-	(*(xprt)->xp_ops->xp_stat)(xprt)
-
-#define SVC_GETARGS(xprt, xargs, argsp)			\
-	(*(xprt)->xp_ops->xp_getargs)((xprt), (xargs), (argsp))
-#define svc_getargs(xprt, xargs, argsp)			\
-	(*(xprt)->xp_ops->xp_getargs)((xprt), (xargs), (argsp))
-
-#define SVC_REPLY(xprt, msg)				\
-	(*(xprt)->xp_ops->xp_reply) ((xprt), (msg))
-#define svc_reply(xprt, msg)				\
-	(*(xprt)->xp_ops->xp_reply) ((xprt), (msg))
-
-#define SVC_FREEARGS(xprt, xargs, argsp)		\
-	(*(xprt)->xp_ops->xp_freeargs)((xprt), (xargs), (argsp))
-#define svc_freeargs(xprt, xargs, argsp)		\
-	(*(xprt)->xp_ops->xp_freeargs)((xprt), (xargs), (argsp))
-
-#define SVC_DESTROY(xprt)				\
-	(*(xprt)->xp_ops->xp_destroy)(xprt)
-#define svc_destroy(xprt)				\
-	(*(xprt)->xp_ops->xp_destroy)(xprt)
-
-
-/*
- * Service request
- */
-struct svc_req {
-  rpcprog_t rq_prog;            /* service program number */
-  rpcvers_t rq_vers;            /* service protocol version */
-  rpcproc_t rq_proc;            /* the desired procedure */
-  struct opaque_auth rq_cred;   /* raw creds from the wire */
-  caddr_t rq_clntcred;          /* read only cooked cred */
-  SVCXPRT *rq_xprt;             /* associated transport */
-};
-
-#ifndef __DISPATCH_FN_T
-#define __DISPATCH_FN_T
-typedef void (*__dispatch_fn_t) (struct svc_req*, SVCXPRT*);
-#endif
-
-/*
- * Service registration
- *
- * svc_register(xprt, prog, vers, dispatch, protocol)
- *	SVCXPRT *xprt;
- *	rpcprog_t prog;
- *	rpcvers_t vers;
- *	void (*dispatch)(struct svc_req*, SVCXPRT*);
- *	rpcprot_t protocol;  like TCP or UDP, zero means do not register
- */
-extern bool_t svc_register (SVCXPRT *__xprt, rpcprog_t __prog,
-			    rpcvers_t __vers, __dispatch_fn_t __dispatch,
-			    rpcprot_t __protocol) __THROW;
-
-/*
- * Service un-registration
- *
- * svc_unregister(prog, vers)
- *	rpcprog_t prog;
- *	rpcvers_t vers;
- */
-extern void svc_unregister (rpcprog_t __prog, rpcvers_t __vers) __THROW;
-
-/*
- * Transport registration.
- *
- * xprt_register(xprt)
- *	SVCXPRT *xprt;
- */
-extern void xprt_register (SVCXPRT *__xprt) __THROW;
-
-/*
- * Transport un-register
- *
- * xprt_unregister(xprt)
- *	SVCXPRT *xprt;
- */
-extern void xprt_unregister (SVCXPRT *__xprt) __THROW;
-
-
-/*
- * When the service routine is called, it must first check to see if it
- * knows about the procedure;  if not, it should call svcerr_noproc
- * and return.  If so, it should deserialize its arguments via
- * SVC_GETARGS (defined above).  If the deserialization does not work,
- * svcerr_decode should be called followed by a return.  Successful
- * decoding of the arguments should be followed the execution of the
- * procedure's code and a call to svc_sendreply.
- *
- * Also, if the service refuses to execute the procedure due to too-
- * weak authentication parameters, svcerr_weakauth should be called.
- * Note: do not confuse access-control failure with weak authentication!
- *
- * NB: In pure implementations of rpc, the caller always waits for a reply
- * msg.  This message is sent when svc_sendreply is called.
- * Therefore pure service implementations should always call
- * svc_sendreply even if the function logically returns void;  use
- * xdr.h - xdr_void for the xdr routine.  HOWEVER, tcp based rpc allows
- * for the abuse of pure rpc via batched calling or pipelining.  In the
- * case of a batched call, svc_sendreply should NOT be called since
- * this would send a return message, which is what batching tries to avoid.
- * It is the service/protocol writer's responsibility to know which calls are
- * batched and which are not.  Warning: responding to batch calls may
- * deadlock the caller and server processes!
- */
-
-extern bool_t	svc_sendreply (SVCXPRT *xprt, xdrproc_t __xdr_results,
-			       caddr_t __xdr_location) __THROW;
-
-extern void	svcerr_decode (SVCXPRT *__xprt) __THROW;
-
-extern void	svcerr_weakauth (SVCXPRT *__xprt) __THROW;
-
-extern void	svcerr_noproc (SVCXPRT *__xprt) __THROW;
-
-extern void	svcerr_progvers (SVCXPRT *__xprt, rpcvers_t __low_vers,
-				 rpcvers_t __high_vers) __THROW;
-
-extern void	svcerr_auth (SVCXPRT *__xprt, enum auth_stat __why) __THROW;
-
-extern void	svcerr_noprog (SVCXPRT *__xprt) __THROW;
-
-extern void	svcerr_systemerr (SVCXPRT *__xprt) __THROW;
-
-/*
- * Lowest level dispatching -OR- who owns this process anyway.
- * Somebody has to wait for incoming requests and then call the correct
- * service routine.  The routine svc_run does infinite waiting; i.e.,
- * svc_run never returns.
- * Since another (coexistent) package may wish to selectively wait for
- * incoming calls or other events outside of the rpc architecture, the
- * routine svc_getreq is provided.  It must be passed readfds, the
- * "in-place" results of a select system call (see select, section 2).
- */
-
-/*
- * Global keeper of rpc service descriptors in use
- * dynamic; must be inspected before each call to select
- */
-
-extern struct pollfd *svc_pollfd;
-extern int svc_max_pollfd;
-extern fd_set svc_fdset;
-#define svc_fds svc_fdset.fds_bits[0]	/* compatibility */
-
-/*
- * a small program implemented by the svc_rpc implementation itself;
- * also see clnt.h for protocol numbers.
- */
-extern void svc_getreq (int __rdfds) __THROW;
-extern void svc_getreq_common (const int __fd) __THROW;
-extern void svc_getreqset (fd_set *__readfds) __THROW;
-extern void svc_getreq_poll (struct pollfd *, const int) __THROW;
-extern void svc_exit (void) __THROW;
-extern void svc_run (void) __THROW;
-
-/*
- * Socket to use on svcxxx_create call to get default socket
- */
-#define	RPC_ANYSOCK	-1
-
-/*
- * These are the existing service side transport implementations
- */
-
-/*
- * Memory based rpc for testing and timing.
- */
-extern SVCXPRT *svcraw_create (void) __THROW;
-
-/*
- * Udp based rpc.
- */
-extern SVCXPRT *svcudp_create (int __sock) __THROW;
-extern SVCXPRT *svcudp_bufcreate (int __sock, u_int __sendsz, u_int __recvsz)
-     __THROW;
-
-/*
- * Tcp based rpc.
- */
-extern SVCXPRT *svctcp_create (int __sock, u_int __sendsize, u_int __recvsize)
-     __THROW;
-
-
-/*
- * Unix based rpc.
- */
-extern SVCXPRT *svcunix_create (int __sock, u_int __sendsize, u_int __recvsize,
-				char *__path) __THROW;
-
-
-__END_DECLS
-
-#endif /* rpc/svc.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/svc_auth.h b/mdk-stage1/dietlibc/include/rpc/svc_auth.h
deleted file mode 100644
index cd4b8da29..000000000
--- a/mdk-stage1/dietlibc/include/rpc/svc_auth.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* @(#)svc_auth.h	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*      @(#)svc_auth.h 1.6 86/07/16 SMI      */
-
-/*
- * svc_auth.h, Service side of rpc authentication.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_SVC_AUTH_H
-#define _RPC_SVC_AUTH_H	1
-
-#include <sys/cdefs.h>
-#include <rpc/svc.h>
-
-__BEGIN_DECLS
-
-/*
- * Server side authenticator
- */
-extern enum auth_stat _authenticate (struct svc_req *__rqst,
-				     struct rpc_msg *__msg) __THROW;
-
-__END_DECLS
-
-#endif /* rpc/svc_auth.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/types.h b/mdk-stage1/dietlibc/include/rpc/types.h
deleted file mode 100644
index e2e8402be..000000000
--- a/mdk-stage1/dietlibc/include/rpc/types.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/* fixincludes should not add extern "C" to this file */
-/*
- * Rpc additions to <sys/types.h>
- */
-#ifndef _RPC_TYPES_H
-#define _RPC_TYPES_H 1
-
-typedef int bool_t;
-typedef int enum_t;
-/* This needs to be changed to uint32_t in the future */
-typedef unsigned long rpcprog_t;
-typedef unsigned long rpcvers_t;
-typedef unsigned long rpcproc_t;
-typedef unsigned long rpcprot_t;
-typedef unsigned long rpcport_t;
-
-#define        __dontcare__    -1
-
-#ifndef FALSE
-#      define  FALSE   (0)
-#endif
-
-#ifndef TRUE
-#      define  TRUE    (1)
-#endif
-
-#ifndef NULL
-#      define  NULL 0
-#endif
-
-#include <stdlib.h>		/* For malloc decl.  */
-#define mem_alloc(bsize)	malloc(bsize)
-#define mem_free(ptr, bsize)	free(ptr)
-
-#ifndef makedev /* ie, we haven't already included it */
-#include <sys/types.h>
-#endif
-#include <sys/time.h>
-#include <sys/param.h>
-
-#include <netinet/in.h>
-
-#ifndef INADDR_LOOPBACK
-#define       INADDR_LOOPBACK         (u_long)0x7F000001
-#endif
-#ifndef MAXHOSTNAMELEN
-#define        MAXHOSTNAMELEN  64
-#endif
-
-#endif /* rpc/types.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/xdr.h b/mdk-stage1/dietlibc/include/rpc/xdr.h
deleted file mode 100644
index ce092f085..000000000
--- a/mdk-stage1/dietlibc/include/rpc/xdr.h
+++ /dev/null
@@ -1,379 +0,0 @@
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-/*
- * xdr.h, External Data Representation Serialization Routines.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_XDR_H
-#define _RPC_XDR_H 1
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <rpc/types.h>
-
-/* We need FILE.  */
-#include <stdio.h>
-
-__BEGIN_DECLS
-
-/*
- * XDR provides a conventional way for converting between C data
- * types and an external bit-string representation.  Library supplied
- * routines provide for the conversion on built-in C data types.  These
- * routines and utility routines defined here are used to help implement
- * a type encode/decode routine for each user-defined type.
- *
- * Each data type provides a single procedure which takes two arguments:
- *
- *      bool_t
- *      xdrproc(xdrs, argresp)
- *              XDR *xdrs;
- *              <type> *argresp;
- *
- * xdrs is an instance of a XDR handle, to which or from which the data
- * type is to be converted.  argresp is a pointer to the structure to be
- * converted.  The XDR handle contains an operation field which indicates
- * which of the operations (ENCODE, DECODE * or FREE) is to be performed.
- *
- * XDR_DECODE may allocate space if the pointer argresp is null.  This
- * data can be freed with the XDR_FREE operation.
- *
- * We write only one procedure per data type to make it easy
- * to keep the encode and decode procedures for a data type consistent.
- * In many cases the same code performs all operations on a user defined type,
- * because all the hard work is done in the component type routines.
- * decode as a series of calls on the nested data types.
- */
-
-/*
- * Xdr operations.  XDR_ENCODE causes the type to be encoded into the
- * stream.  XDR_DECODE causes the type to be extracted from the stream.
- * XDR_FREE can be used to release the space allocated by an XDR_DECODE
- * request.
- */
-enum xdr_op {
-  XDR_ENCODE = 0,
-  XDR_DECODE = 1,
-  XDR_FREE = 2
-};
-
-/*
- * This is the number of bytes per unit of external data.
- */
-#define BYTES_PER_XDR_UNIT	(4)
-/*
- * This only works if the above is a power of 2.  But it's defined to be
- * 4 by the appropriate RFCs.  So it will work.  And it's normally quicker
- * than the old routine.
- */
-#if 1
-#define RNDUP(x)  (((x) + BYTES_PER_XDR_UNIT - 1) & ~(BYTES_PER_XDR_UNIT - 1))
-#else /* this is the old routine */
-#define RNDUP(x)  ((((x) + BYTES_PER_XDR_UNIT - 1) / BYTES_PER_XDR_UNIT) \
-		    * BYTES_PER_XDR_UNIT)
-#endif
-
-/*
- * The XDR handle.
- * Contains operation which is being applied to the stream,
- * an operations vector for the particular implementation (e.g. see xdr_mem.c),
- * and two private fields for the use of the particular implementation.
- */
-typedef struct XDR XDR;
-struct XDR
-  {
-    enum xdr_op x_op;		/* operation; fast additional param */
-    struct xdr_ops
-      {
-	bool_t (*x_getlong) (XDR *__xdrs, long *__lp);
-	/* get a long from underlying stream */
-	bool_t (*x_putlong) (XDR *__xdrs, const long *__lp);
-	/* put a long to " */
-	bool_t (*x_getbytes) (XDR *__xdrs, caddr_t __addr, u_int __len);
-	/* get some bytes from " */
-	bool_t (*x_putbytes) (XDR *__xdrs, const char *__addr, u_int __len);
-	/* put some bytes to " */
-	u_int (*x_getpostn) (const XDR *__xdrs);
-	/* returns bytes off from beginning */
-	bool_t (*x_setpostn) (XDR *__xdrs, u_int __pos);
-	/* lets you reposition the stream */
-	int32_t *(*x_inline) (XDR *__xdrs, int __len);
-	/* buf quick ptr to buffered data */
-	void (*x_destroy) (XDR *__xdrs);
-	/* free privates of this xdr_stream */
-	bool_t (*x_getint32) (XDR *__xdrs, int32_t *__ip);
-	/* get a int from underlying stream */
-	bool_t (*x_putint32) (XDR *__xdrs, const int32_t *__ip);
-	/* put a int to " */
-      }
-     *x_ops;
-    caddr_t x_public;		/* users' data */
-    caddr_t x_private;		/* pointer to private data */
-    caddr_t x_base;		/* private used for position info */
-    int x_handy;		/* extra private word */
-  };
-
-/*
- * A xdrproc_t exists for each data type which is to be encoded or decoded.
- *
- * The second argument to the xdrproc_t is a pointer to an opaque pointer.
- * The opaque pointer generally points to a structure of the data type
- * to be decoded.  If this pointer is 0, then the type routines should
- * allocate dynamic storage of the appropriate size and return it.
- * bool_t       (*xdrproc_t)(XDR *, caddr_t *);
- */
-typedef bool_t (*xdrproc_t) (XDR *, void *,...);
-
-
-/*
- * Operations defined on a XDR handle
- *
- * XDR          *xdrs;
- * int32_t      *int32p;
- * long         *longp;
- * caddr_t       addr;
- * u_int         len;
- * u_int         pos;
- */
-#define XDR_GETINT32(xdrs, int32p)                      \
-        (*(xdrs)->x_ops->x_getint32)(xdrs, int32p)
-#define xdr_getint32(xdrs, int32p)                      \
-        (*(xdrs)->x_ops->x_getint32)(xdrs, int32p)
-
-#define XDR_PUTINT32(xdrs, int32p)                      \
-        (*(xdrs)->x_ops->x_putint32)(xdrs, int32p)
-#define xdr_putint32(xdrs, int32p)                      \
-        (*(xdrs)->x_ops->x_putint32)(xdrs, int32p)
-
-#define XDR_GETLONG(xdrs, longp)			\
-	(*(xdrs)->x_ops->x_getlong)(xdrs, longp)
-#define xdr_getlong(xdrs, longp)			\
-	(*(xdrs)->x_ops->x_getlong)(xdrs, longp)
-
-#define XDR_PUTLONG(xdrs, longp)			\
-	(*(xdrs)->x_ops->x_putlong)(xdrs, longp)
-#define xdr_putlong(xdrs, longp)			\
-	(*(xdrs)->x_ops->x_putlong)(xdrs, longp)
-
-#define XDR_GETBYTES(xdrs, addr, len)			\
-	(*(xdrs)->x_ops->x_getbytes)(xdrs, addr, len)
-#define xdr_getbytes(xdrs, addr, len)			\
-	(*(xdrs)->x_ops->x_getbytes)(xdrs, addr, len)
-
-#define XDR_PUTBYTES(xdrs, addr, len)			\
-	(*(xdrs)->x_ops->x_putbytes)(xdrs, addr, len)
-#define xdr_putbytes(xdrs, addr, len)			\
-	(*(xdrs)->x_ops->x_putbytes)(xdrs, addr, len)
-
-#define XDR_GETPOS(xdrs)				\
-	(*(xdrs)->x_ops->x_getpostn)(xdrs)
-#define xdr_getpos(xdrs)				\
-	(*(xdrs)->x_ops->x_getpostn)(xdrs)
-
-#define XDR_SETPOS(xdrs, pos)				\
-	(*(xdrs)->x_ops->x_setpostn)(xdrs, pos)
-#define xdr_setpos(xdrs, pos)				\
-	(*(xdrs)->x_ops->x_setpostn)(xdrs, pos)
-
-#define	XDR_INLINE(xdrs, len)				\
-	(*(xdrs)->x_ops->x_inline)(xdrs, len)
-#define	xdr_inline(xdrs, len)				\
-	(*(xdrs)->x_ops->x_inline)(xdrs, len)
-
-#define	XDR_DESTROY(xdrs)					\
-	do {							\
-		if ((xdrs)->x_ops->x_destroy)			\
-			(*(xdrs)->x_ops->x_destroy)(xdrs);	\
-	} while (0)
-#define	xdr_destroy(xdrs)					\
-	do {							\
-		if ((xdrs)->x_ops->x_destroy)			\
-			(*(xdrs)->x_ops->x_destroy)(xdrs);	\
-	} while (0)
-
-/*
- * Support struct for discriminated unions.
- * You create an array of xdrdiscrim structures, terminated with
- * a entry with a null procedure pointer.  The xdr_union routine gets
- * the discriminant value and then searches the array of structures
- * for a matching value.  If a match is found the associated xdr routine
- * is called to handle that part of the union.  If there is
- * no match, then a default routine may be called.
- * If there is no match and no default routine it is an error.
- */
-#define NULL_xdrproc_t ((xdrproc_t)0)
-struct xdr_discrim
-{
-  int value;
-  xdrproc_t proc;
-};
-
-/*
- * Inline routines for fast encode/decode of primitive data types.
- * Caveat emptor: these use single memory cycles to get the
- * data from the underlying buffer, and will fail to operate
- * properly if the data is not aligned.  The standard way to use these
- * is to say:
- *      if ((buf = XDR_INLINE(xdrs, count)) == NULL)
- *              return (FALSE);
- *      <<< macro calls >>>
- * where ``count'' is the number of bytes of data occupied
- * by the primitive data types.
- *
- * N.B. and frozen for all time: each data type here uses 4 bytes
- * of external representation.
- */
-
-#define IXDR_GET_INT32(buf)           ((int32_t)ntohl((uint32_t)*(buf)++))
-#define IXDR_PUT_INT32(buf, v)        (*(buf)++ = (int32_t)htonl((uint32_t)(v)))
-#define IXDR_GET_U_INT32(buf)         ((uint32_t)IXDR_GET_INT32(buf))
-#define IXDR_PUT_U_INT32(buf, v)      IXDR_PUT_INT32(buf, (int32_t)(v))
-
-/* WARNING: The IXDR_*_LONG defines are removed by Sun for new platforms
- * and shouldn't be used any longer. Code which use this defines or longs
- * in the RPC code will not work on 64bit Solaris platforms !
- */
-#define IXDR_GET_LONG(buf) \
-	((long)ntohl((u_long)*__extension__((u_int32_t*)(buf))++))
-#define IXDR_PUT_LONG(buf, v) \
-	(*__extension__((u_int32_t*)(buf))++ = (long)htonl((u_long)(v)))
-#define IXDR_GET_U_LONG(buf)	      ((u_long)IXDR_GET_LONG(buf))
-#define IXDR_PUT_U_LONG(buf, v)	      IXDR_PUT_LONG(buf, (long)(v))
-
-
-#define IXDR_GET_BOOL(buf)            ((bool_t)IXDR_GET_LONG(buf))
-#define IXDR_GET_ENUM(buf, t)         ((t)IXDR_GET_LONG(buf))
-#define IXDR_GET_SHORT(buf)           ((short)IXDR_GET_LONG(buf))
-#define IXDR_GET_U_SHORT(buf)         ((u_short)IXDR_GET_LONG(buf))
-
-#define IXDR_PUT_BOOL(buf, v)         IXDR_PUT_LONG(buf, (long)(v))
-#define IXDR_PUT_ENUM(buf, v)         IXDR_PUT_LONG(buf, (long)(v))
-#define IXDR_PUT_SHORT(buf, v)        IXDR_PUT_LONG(buf, (long)(v))
-#define IXDR_PUT_U_SHORT(buf, v)      IXDR_PUT_LONG(buf, (long)(v))
-
-/*
- * These are the "generic" xdr routines.
- * None of these can have const applied because it's not possible to
- * know whether the call is a read or a write to the passed parameter
- * also, the XDR structure is always updated by some of these calls.
- */
-extern bool_t xdr_void (void) __THROW;
-extern bool_t xdr_short (XDR *__xdrs, short *__sp) __THROW;
-extern bool_t xdr_u_short (XDR *__xdrs, u_short *__usp) __THROW;
-extern bool_t xdr_int (XDR *__xdrs, int *__ip) __THROW;
-extern bool_t xdr_u_int (XDR *__xdrs, u_int *__up) __THROW;
-extern bool_t xdr_long (XDR *__xdrs, long *__lp) __THROW;
-extern bool_t xdr_u_long (XDR *__xdrs, u_long *__ulp) __THROW;
-extern bool_t xdr_hyper (XDR *__xdrs, __quad_t *__llp) __THROW;
-extern bool_t xdr_u_hyper (XDR *__xdrs, __u_quad_t *__ullp) __THROW;
-extern bool_t xdr_longlong_t (XDR *__xdrs, __quad_t *__llp) __THROW;
-extern bool_t xdr_u_longlong_t (XDR *__xdrs, __u_quad_t *__ullp) __THROW;
-extern bool_t xdr_int8_t (XDR *__xdrs, int8_t *__ip) __THROW;
-extern bool_t xdr_uint8_t (XDR *__xdrs, uint8_t *__up) __THROW;
-extern bool_t xdr_int16_t (XDR *__xdrs, int16_t *__ip) __THROW;
-extern bool_t xdr_uint16_t (XDR *__xdrs, uint16_t *__up) __THROW;
-extern bool_t xdr_int32_t (XDR *__xdrs, int32_t *__ip) __THROW;
-extern bool_t xdr_uint32_t (XDR *__xdrs, uint32_t *__up) __THROW;
-extern bool_t xdr_int64_t (XDR *__xdrs, int64_t *__ip) __THROW;
-extern bool_t xdr_uint64_t (XDR *__xdrs, uint64_t *__up) __THROW;
-extern bool_t xdr_bool (XDR *__xdrs, bool_t *__bp) __THROW;
-extern bool_t xdr_enum (XDR *__xdrs, enum_t *__ep) __THROW;
-extern bool_t xdr_array (XDR * _xdrs, caddr_t *__addrp, u_int *__sizep,
-			 u_int __maxsize, u_int __elsize, xdrproc_t __elproc)
-     __THROW;
-extern bool_t xdr_bytes (XDR *__xdrs, char **__cpp, u_int *__sizep,
-			 u_int __maxsize) __THROW;
-extern bool_t xdr_opaque (XDR *__xdrs, caddr_t __cp, u_int __cnt) __THROW;
-extern bool_t xdr_string (XDR *__xdrs, char **__cpp, u_int __maxsize) __THROW;
-extern bool_t xdr_union (XDR *__xdrs, enum_t *__dscmp, char *__unp,
-			 const struct xdr_discrim *__choices,
-			 xdrproc_t dfault) __THROW;
-extern bool_t xdr_char (XDR *__xdrs, char *__cp) __THROW;
-extern bool_t xdr_u_char (XDR *__xdrs, u_char *__cp) __THROW;
-extern bool_t xdr_vector (XDR *__xdrs, char *__basep, u_int __nelem,
-			  u_int __elemsize, xdrproc_t __xdr_elem) __THROW;
-extern bool_t xdr_float (XDR *__xdrs, float *__fp) __THROW;
-extern bool_t xdr_double (XDR *__xdrs, double *__dp) __THROW;
-extern bool_t xdr_reference (XDR *__xdrs, caddr_t *__xpp, u_int __size,
-			     xdrproc_t __proc) __THROW;
-extern bool_t xdr_pointer (XDR *__xdrs, char **__objpp,
-			   u_int __obj_size, xdrproc_t __xdr_obj) __THROW;
-extern bool_t xdr_wrapstring (XDR *__xdrs, char **__cpp) __THROW;
-extern u_long xdr_sizeof (xdrproc_t, void *) __THROW;
-
-/*
- * Common opaque bytes objects used by many rpc protocols;
- * declared here due to commonality.
- */
-#define MAX_NETOBJ_SZ 1024
-struct netobj
-{
-  u_int n_len;
-  char *n_bytes;
-};
-typedef struct netobj netobj;
-extern bool_t xdr_netobj (XDR *__xdrs, struct netobj *__np) __THROW;
-
-/*
- * These are the public routines for the various implementations of
- * xdr streams.
- */
-
-/* XDR using memory buffers */
-extern void xdrmem_create (XDR *__xdrs, const caddr_t __addr,
-			   u_int __size, enum xdr_op __xop) __THROW;
-
-/* XDR using stdio library */
-extern void xdrstdio_create (XDR *__xdrs, FILE *__file, enum xdr_op __xop)
-     __THROW;
-
-/* XDR pseudo records for tcp */
-extern void xdrrec_create (XDR *__xdrs, u_int __sendsize,
-			   u_int __recvsize, caddr_t __tcp_handle,
-			   int (*__readit) (char *, char *, int),
-			   int (*__writeit) (char *, char *, int)) __THROW;
-
-/* make end of xdr record */
-extern bool_t xdrrec_endofrecord (XDR *__xdrs, bool_t __sendnow) __THROW;
-
-/* move to beginning of next record */
-extern bool_t xdrrec_skiprecord (XDR *__xdrs) __THROW;
-
-/* true if no more input */
-extern bool_t xdrrec_eof (XDR *__xdrs) __THROW;
-
-/* free memory buffers for xdr */
-extern void xdr_free (xdrproc_t __proc, char *__objp) __THROW;
-
-__END_DECLS
-
-#endif /* rpc/xdr.h */
diff --git a/mdk-stage1/dietlibc/include/sched.h b/mdk-stage1/dietlibc/include/sched.h
deleted file mode 100644
index 5e4430d29..000000000
--- a/mdk-stage1/dietlibc/include/sched.h
+++ /dev/null
@@ -1,74 +0,0 @@
-#ifndef _SCHED_H
-#define _SCHED_H 1
-
-#include <time.h>
-
-#include <sys/types.h>
-#ifndef u16
-#define u16 __u16
-#endif
-
-/* till those F**KIN' kernel headers are sane: A COPY !
- * #include <linux/sched.h>
- * A COPY OF THE STUFF WE NEED.... *GRUMBLE* */
-
-/*
- * cloning flags:
- */
-#define CSIGNAL         0x000000ff      /* signal mask to be sent at exit */
-#define CLONE_VM        0x00000100      /* set if VM shared between processes */
-#define CLONE_FS        0x00000200      /* set if fs info shared between processes */
-#define CLONE_FILES     0x00000400      /* set if open files shared between processes */
-#define CLONE_SIGHAND   0x00000800      /* set if signal handlers and blocked signals shared */
-#define CLONE_PID       0x00001000      /* set if pid shared */
-#define CLONE_PTRACE    0x00002000      /* set if we want to let tracing continue on the child too */
-#define CLONE_VFORK     0x00004000      /* set if the parent wants the child to wake it up on mm_release */
-#define CLONE_PARENT    0x00008000      /* set if we want to have the same parent as the cloner */
-#define CLONE_THREAD    0x00010000      /* Same thread group? */
-
-#define CLONE_SIGNAL    (CLONE_SIGHAND | CLONE_THREA)
-
-/*
- * Scheduling policies
- */
-#define SCHED_OTHER		0
-#define SCHED_FIFO		1
-#define SCHED_RR		2
-
-/*
- * This is an additional bit set when we want to
- * yield the CPU for one re-schedule..
- */
-#define SCHED_YIELD		0x10
-
-struct sched_param {
-	int sched_priority;
-};
-
-/* END OF COPY form kernel-header */
-
-int __sched_setparam(pid_t pid, const struct sched_param *p);
-int sched_setparam(pid_t pid, const struct sched_param *p);
-
-int __sched_getparam(pid_t pid, struct sched_param *p);
-int sched_getparam(pid_t pid, struct sched_param *p);
-
-int __sched_getscheduler(pid_t pid);
-int sched_getscheduler(pid_t pid);
-
-int __sched_setscheduler(pid_t pid, int policy, const struct sched_param *p);
-int sched_setscheduler(pid_t pid, int policy, const struct sched_param *p);
-
-int __sched_yield(void);
-int sched_yield(void);
-
-int __sched_get_priority_max(int policy);
-int sched_get_priority_max(int policy);
-
-int __sched_get_priority_min(int policy);
-int sched_get_priority_min(int policy);
-
-int __sched_rr_get_interval(pid_t pid, struct timespec *tp);
-int sched_rr_get_interval(pid_t pid, struct timespec *tp);
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/scsi/scsi.h b/mdk-stage1/dietlibc/include/scsi/scsi.h
deleted file mode 100644
index 652e44ee9..000000000
--- a/mdk-stage1/dietlibc/include/scsi/scsi.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/* Copyright (C) 1998, 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/*
- * This header file contains public constants and structures used by
- * the scsi code for linux.
- */
-
-#ifndef _SCSI_SCSI_H
-#define _SCSI_SCSI_H	1
-
-/*
- *      SCSI opcodes
- */
-
-#define TEST_UNIT_READY       0x00
-#define REZERO_UNIT           0x01
-#define REQUEST_SENSE         0x03
-#define FORMAT_UNIT           0x04
-#define READ_BLOCK_LIMITS     0x05
-#define REASSIGN_BLOCKS       0x07
-#define READ_6                0x08
-#define WRITE_6               0x0a
-#define SEEK_6                0x0b
-#define READ_REVERSE          0x0f
-#define WRITE_FILEMARKS       0x10
-#define SPACE                 0x11
-#define INQUIRY               0x12
-#define RECOVER_BUFFERED_DATA 0x14
-#define MODE_SELECT           0x15
-#define RESERVE               0x16
-#define RELEASE               0x17
-#define COPY                  0x18
-#define ERASE                 0x19
-#define MODE_SENSE            0x1a
-#define START_STOP            0x1b
-#define RECEIVE_DIAGNOSTIC    0x1c
-#define SEND_DIAGNOSTIC       0x1d
-#define ALLOW_MEDIUM_REMOVAL  0x1e
-
-#define SET_WINDOW            0x24
-#define READ_CAPACITY         0x25
-#define READ_10               0x28
-#define WRITE_10              0x2a
-#define SEEK_10               0x2b
-#define WRITE_VERIFY          0x2e
-#define VERIFY                0x2f
-#define SEARCH_HIGH           0x30
-#define SEARCH_EQUAL          0x31
-#define SEARCH_LOW            0x32
-#define SET_LIMITS            0x33
-#define PRE_FETCH             0x34
-#define READ_POSITION         0x34
-#define SYNCHRONIZE_CACHE     0x35
-#define LOCK_UNLOCK_CACHE     0x36
-#define READ_DEFECT_DATA      0x37
-#define MEDIUM_SCAN           0x38
-#define COMPARE               0x39
-#define COPY_VERIFY           0x3a
-#define WRITE_BUFFER          0x3b
-#define READ_BUFFER           0x3c
-#define UPDATE_BLOCK          0x3d
-#define READ_LONG             0x3e
-#define WRITE_LONG            0x3f
-#define CHANGE_DEFINITION     0x40
-#define WRITE_SAME            0x41
-#define READ_TOC              0x43
-#define LOG_SELECT            0x4c
-#define LOG_SENSE             0x4d
-#define MODE_SELECT_10        0x55
-#define RESERVE_10            0x56
-#define RELEASE_10            0x57
-#define MODE_SENSE_10         0x5a
-#define PERSISTENT_RESERVE_IN 0x5e
-#define PERSISTENT_RESERVE_OUT 0x5f
-#define MOVE_MEDIUM           0xa5
-#define READ_12               0xa8
-#define WRITE_12              0xaa
-#define WRITE_VERIFY_12       0xae
-#define SEARCH_HIGH_12        0xb0
-#define SEARCH_EQUAL_12       0xb1
-#define SEARCH_LOW_12         0xb2
-#define READ_ELEMENT_STATUS   0xb8
-#define SEND_VOLUME_TAG       0xb6
-#define WRITE_LONG_2          0xea
-
-/*
- *  Status codes
- */
-
-#define GOOD                 0x00
-#define CHECK_CONDITION      0x01
-#define CONDITION_GOOD       0x02
-#define BUSY                 0x04
-#define INTERMEDIATE_GOOD    0x08
-#define INTERMEDIATE_C_GOOD  0x0a
-#define RESERVATION_CONFLICT 0x0c
-#define COMMAND_TERMINATED   0x11
-#define QUEUE_FULL           0x14
-
-#define STATUS_MASK          0x3e
-
-/*
- *  SENSE KEYS
- */
-
-#define NO_SENSE            0x00
-#define RECOVERED_ERROR     0x01
-#define NOT_READY           0x02
-#define MEDIUM_ERROR        0x03
-#define HARDWARE_ERROR      0x04
-#define ILLEGAL_REQUEST     0x05
-#define UNIT_ATTENTION      0x06
-#define DATA_PROTECT        0x07
-#define BLANK_CHECK         0x08
-#define COPY_ABORTED        0x0a
-#define ABORTED_COMMAND     0x0b
-#define VOLUME_OVERFLOW     0x0d
-#define MISCOMPARE          0x0e
-
-
-/*
- *  DEVICE TYPES
- */
-
-#define TYPE_DISK           0x00
-#define TYPE_TAPE           0x01
-#define TYPE_PROCESSOR      0x03    /* HP scanners use this */
-#define TYPE_WORM           0x04    /* Treated as ROM by our system */
-#define TYPE_ROM            0x05
-#define TYPE_SCANNER        0x06
-#define TYPE_MOD            0x07    /* Magneto-optical disk -
-				     * - treated as TYPE_DISK */
-#define TYPE_MEDIUM_CHANGER 0x08
-#define TYPE_ENCLOSURE	    0x0d    /* Enclosure Services Device */
-#define TYPE_NO_LUN         0x7f
-
-/*
- * standard mode-select header prepended to all mode-select commands
- *
- * moved here from cdrom.h -- kraxel
- */
-
-struct ccs_modesel_head
-  {
-    unsigned char _r1;			/* reserved.  */
-    unsigned char medium;		/* device-specific medium type.  */
-    unsigned char _r2;			/* reserved.  */
-    unsigned char block_desc_length;	/* block descriptor length.  */
-    unsigned char density;		/* device-specific density code.  */
-    unsigned char number_blocks_hi;	/* number of blocks in this block
-					   desc.  */
-    unsigned char number_blocks_med;
-    unsigned char number_blocks_lo;
-    unsigned char _r3;
-    unsigned char block_length_hi;	/* block length for blocks in this
-					   desc.  */
-    unsigned char block_length_med;
-    unsigned char block_length_lo;
-  };
-
-/*
- *  MESSAGE CODES
- */
-
-#define COMMAND_COMPLETE    0x00
-#define EXTENDED_MESSAGE    0x01
-#define     EXTENDED_MODIFY_DATA_POINTER    0x00
-#define     EXTENDED_SDTR                   0x01
-#define     EXTENDED_EXTENDED_IDENTIFY      0x02    /* SCSI-I only */
-#define     EXTENDED_WDTR                   0x03
-#define SAVE_POINTERS       0x02
-#define RESTORE_POINTERS    0x03
-#define DISCONNECT          0x04
-#define INITIATOR_ERROR     0x05
-#define ABORT               0x06
-#define MESSAGE_REJECT      0x07
-#define NOP                 0x08
-#define MSG_PARITY_ERROR    0x09
-#define LINKED_CMD_COMPLETE 0x0a
-#define LINKED_FLG_CMD_COMPLETE 0x0b
-#define BUS_DEVICE_RESET    0x0c
-
-#define INITIATE_RECOVERY   0x0f            /* SCSI-II only */
-#define RELEASE_RECOVERY    0x10            /* SCSI-II only */
-
-#define SIMPLE_QUEUE_TAG    0x20
-#define HEAD_OF_QUEUE_TAG   0x21
-#define ORDERED_QUEUE_TAG   0x22
-
-/*
- * Here are some scsi specific ioctl commands which are sometimes useful.
- */
-/* These are a few other constants only used by scsi devices.  */
-
-#define SCSI_IOCTL_GET_IDLUN 0x5382
-
-/* Used to turn on and off tagged queuing for scsi devices.  */
-
-#define SCSI_IOCTL_TAGGED_ENABLE 0x5383
-#define SCSI_IOCTL_TAGGED_DISABLE 0x5384
-
-/* Used to obtain the host number of a device.  */
-#define SCSI_IOCTL_PROBE_HOST 0x5385
-
-/* Used to get the bus number for a device.  */
-#define SCSI_IOCTL_GET_BUS_NUMBER 0x5386
-
-#endif /* scsi/scsi.h */
diff --git a/mdk-stage1/dietlibc/include/scsi/scsi_ioctl.h b/mdk-stage1/dietlibc/include/scsi/scsi_ioctl.h
deleted file mode 100644
index bc9931838..000000000
--- a/mdk-stage1/dietlibc/include/scsi/scsi_ioctl.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* Copyright (C) 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#ifndef _SCSI_IOCTL_H
-#define _SCSI_IOCTL_H 
-
-/* IOCTLs for SCSI.  */
-#define SCSI_IOCTL_SEND_COMMAND		1	/* Send a command to the SCSI host.  */
-#define SCSI_IOCTL_TEST_UNIT_READY	2	/* Test if unit is ready.  */
-#define SCSI_IOCTL_BENCHMARK_COMMAND	3
-#define SCSI_IOCTL_SYNC			4	/* Request synchronous parameters.  */
-#define SCSI_IOCTL_START_UNIT		5
-#define SCSI_IOCTL_STOP_UNIT		6
-#define SCSI_IOCTL_DOORLOCK		0x5380	/* Lock the eject mechanism.  */
-#define SCSI_IOCTL_DOORUNLOCK		0x5381	/* Unlock the mechanism.  */
-
-#endif
-
-
diff --git a/mdk-stage1/dietlibc/include/scsi/sg.h b/mdk-stage1/dietlibc/include/scsi/sg.h
deleted file mode 100644
index 00334654e..000000000
--- a/mdk-stage1/dietlibc/include/scsi/sg.h
+++ /dev/null
@@ -1,274 +0,0 @@
-/* Copyright (C) 1997, 1998, 1999, 2000  Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/*
-   History:
-    Started: Aug 9 by Lawrence Foard (entropy@world.std.com), to allow user
-     process control of SCSI devices.
-    Development Sponsored by Killy Corp. NY NY
-*/
-
-#ifndef _SCSI_SG_H
-#define _SCSI_SG_H	1
-
-#include <sys/types.h>
-
-/* New interface introduced in the 3.x SG drivers follows */
-
-/* Same structure as used by readv() Linux system call. It defines one
-   scatter-gather element. */
-typedef struct sg_iovec
-{
-  void * iov_base;            /* Starting address  */
-  size_t iov_len;             /* Length in bytes  */
-} sg_iovec_t;
-
-
-typedef struct sg_io_hdr
-{
-  int interface_id;           /* [i] 'S' for SCSI generic (required) */
-  int dxfer_direction;        /* [i] data transfer direction  */
-  unsigned char cmd_len;      /* [i] SCSI command length ( <= 16 bytes) */
-  unsigned char mx_sb_len;    /* [i] max length to write to sbp */
-  unsigned short int iovec_count; /* [i] 0 implies no scatter gather */
-  unsigned int dxfer_len;     /* [i] byte count of data transfer */
-  void * dxferp;              /* [i], [*io] points to data transfer memory
-				 or scatter gather list */
-  unsigned char * cmdp;       /* [i], [*i] points to command to perform */
-  unsigned char * sbp;        /* [i], [*o] points to sense_buffer memory */
-  unsigned int timeout;       /* [i] MAX_UINT->no timeout (unit: millisec) */
-  unsigned int flags;         /* [i] 0 -> default, see SG_FLAG... */
-  int pack_id;                /* [i->o] unused internally (normally) */
-  void * usr_ptr;             /* [i->o] unused internally */
-  unsigned char status;       /* [o] scsi status */
-  unsigned char masked_status;/* [o] shifted, masked scsi status */
-  unsigned char msg_status;   /* [o] messaging level data (optional) */
-  unsigned char sb_len_wr;    /* [o] byte count actually written to sbp */
-  unsigned short int host_status; /* [o] errors from host adapter */
-  unsigned short int driver_status;/* [o] errors from software driver */
-  int resid;                  /* [o] dxfer_len - actual_transferred */
-  unsigned int duration;      /* [o] time taken by cmd (unit: millisec) */
-  unsigned int info;          /* [o] auxiliary information */
-} sg_io_hdr_t;
-
-
-/* Use negative values to flag difference from original sg_header structure.  */
-#define SG_DXFER_NONE -1        /* e.g. a SCSI Test Unit Ready command */
-#define SG_DXFER_TO_DEV -2      /* e.g. a SCSI WRITE command */
-#define SG_DXFER_FROM_DEV -3    /* e.g. a SCSI READ command */
-#define SG_DXFER_TO_FROM_DEV -4 /* treated like SG_DXFER_FROM_DEV with the
-				   additional property than during indirect
-				   IO the user buffer is copied into the
-				   kernel buffers before the transfer */
-
-
-/* following flag values can be "or"-ed together */
-#define SG_FLAG_DIRECT_IO 1     /* default is indirect IO */
-#define SG_FLAG_LUN_INHIBIT 2   /* default is to put device's lun into */
-				/* the 2nd byte of SCSI command */
-#define SG_FLAG_NO_DXFER 0x10000 /* no transfer of kernel buffers to/from */
-				/* user space (debug indirect IO) */
-
-/* The following 'info' values are "or"-ed together.  */
-#define SG_INFO_OK_MASK	0x1
-#define SG_INFO_OK	0x0	/* no sense, host nor driver "noise" */
-#define SG_INFO_CHECK	0x1     /* something abnormal happened */
-
-#define SG_INFO_DIRECT_IO_MASK	0x6
-#define SG_INFO_INDIRECT_IO 	0x0	/* data xfer via kernel buffers (or no xfer) */
-#define SG_INFO_DIRECT_IO 	0x2	/* direct IO requested and performed */
-#define SG_INFO_MIXED_IO 	0x4	/* part direct, part indirect IO */
-
-
-/* Request information about a specific SG device, used by
-   SG_GET_SCSI_ID ioctl ().  */
-struct sg_scsi_id {
-  /* Host number as in "scsi<n>" where 'n' is one of 0, 1, 2 etc.  */
-  int host_no;
-  int channel;
-  /* SCSI id of target device.  */
-  int scsi_id;
-  int lun;
-  /* TYPE_... defined in <scsi/scsi.h>.  */
-  int scsi_type;
-  /* Host (adapter) maximum commands per lun.  */
-  short int h_cmd_per_lun;
-  /* Device (or adapter) maximum queue length.  */
-  short int d_queue_depth;
-  /* Unused, set to 0 for now.  */
-  int unused[2];
-};
-
-/* Used by SG_GET_REQUEST_TABLE ioctl().  */
-typedef struct sg_req_info {
-    char req_state;     /* 0 -> not used, 1 -> written, 2 -> ready to read */
-    char orphan;        /* 0 -> normal request, 1 -> from interruped SG_IO */
-    char sg_io_owned;   /* 0 -> complete with read(), 1 -> owned by SG_IO */
-    char problem;       /* 0 -> no problem detected, 1 -> error to report */
-    int pack_id;        /* pack_id associated with request */
-    void * usr_ptr;     /* user provided pointer (in new interface) */
-    unsigned int duration; /* millisecs elapsed since written (req_state==1)
-			      or request duration (req_state==2) */
-    int unused;
-} sg_req_info_t;
-
-
-/* IOCTLs: Those ioctls that are relevant to the SG 3.x drivers follow.
- [Those that only apply to the SG 2.x drivers are at the end of the file.]
- (_GET_s yield result via 'int *' 3rd argument unless otherwise indicated) */
-
-#define SG_EMULATED_HOST 0x2203 /* true for emulated host adapter (ATAPI) */
-
-/* Used to configure SCSI command transformation layer for ATAPI devices */
-/* Only supported by the ide-scsi driver */
-#define SG_SET_TRANSFORM 0x2204 /* N.B. 3rd arg is not pointer but value: */
-		      /* 3rd arg = 0 to disable transform, 1 to enable it */
-#define SG_GET_TRANSFORM 0x2205
-
-#define SG_SET_RESERVED_SIZE 0x2275  /* request a new reserved buffer size */
-#define SG_GET_RESERVED_SIZE 0x2272  /* actual size of reserved buffer */
-
-/* The following ioctl has a 'sg_scsi_id_t *' object as its 3rd argument. */
-#define SG_GET_SCSI_ID 0x2276   /* Yields fd's bus, chan, dev, lun + type */
-/* SCSI id information can also be obtained from SCSI_IOCTL_GET_IDLUN */
-
-/* Override host setting and always DMA using low memory ( <16MB on i386) */
-#define SG_SET_FORCE_LOW_DMA 0x2279  /* 0-> use adapter setting, 1-> force */
-#define SG_GET_LOW_DMA 0x227a   /* 0-> use all ram for dma; 1-> low dma ram */
-
-/* When SG_SET_FORCE_PACK_ID set to 1, pack_id is input to read() which
-   tries to fetch a packet with a matching pack_id, waits, or returns EAGAIN.
-   If pack_id is -1 then read oldest waiting. When ...FORCE_PACK_ID set to 0
-   then pack_id ignored by read() and oldest readable fetched. */
-#define SG_SET_FORCE_PACK_ID 0x227b
-#define SG_GET_PACK_ID 0x227c /* Yields oldest readable pack_id (or -1) */
-
-#define SG_GET_NUM_WAITING 0x227d /* Number of commands awaiting read() */
-
-/* Yields max scatter gather tablesize allowed by current host adapter */
-#define SG_GET_SG_TABLESIZE 0x227F  /* 0 implies can't do scatter gather */
-
-#define SG_GET_VERSION_NUM 0x2282 /* Example: version 2.1.34 yields 20134 */
-
-/* Returns -EBUSY if occupied. 3rd argument pointer to int (see next) */
-#define SG_SCSI_RESET 0x2284
-/* Associated values that can be given to SG_SCSI_RESET follow */
-#define SG_SCSI_RESET_NOTHING	0
-#define SG_SCSI_RESET_DEVICE	1
-#define SG_SCSI_RESET_BUS	2
-#define SG_SCSI_RESET_HOST	3
-
-/* synchronous SCSI command ioctl, (only in version 3 interface) */
-#define SG_IO 0x2285   /* similar effect as write() followed by read() */
-
-#define SG_GET_REQUEST_TABLE 0x2286   /* yields table of active requests */
-
-/* How to treat EINTR during SG_IO ioctl(), only in SG 3.x series */
-#define SG_SET_KEEP_ORPHAN 0x2287 /* 1 -> hold for read(), 0 -> drop (def) */
-#define SG_GET_KEEP_ORPHAN 0x2288
-
-
-#define SG_SCATTER_SZ (8 * 4096)  /* PAGE_SIZE not available to user */
-/* Largest size (in bytes) a single scatter-gather list element can have.
-   The value must be a power of 2 and <= (PAGE_SIZE * 32) [131072 bytes on
-   i386]. The minimum value is PAGE_SIZE. If scatter-gather not supported
-   by adapter then this value is the largest data block that can be
-   read/written by a single scsi command. The user can find the value of
-   PAGE_SIZE by calling getpagesize() defined in unistd.h . */
-
-#define SG_DEFAULT_RETRIES 1
-
-/* Defaults, commented if they differ from original sg driver */
-#define SG_DEF_FORCE_LOW_DMA 0  /* was 1 -> memory below 16MB on i386 */
-#define SG_DEF_FORCE_PACK_ID 0
-#define SG_DEF_KEEP_ORPHAN 0
-#define SG_DEF_RESERVED_SIZE SG_SCATTER_SZ /* load time option */
-
-/* maximum outstanding requests, write() yields EDOM if exceeded */
-#define SG_MAX_QUEUE 16
-
-#define SG_BIG_BUFF SG_DEF_RESERVED_SIZE    /* for backward compatibility */
-
-/* Alternate style type names, "..._t" variants preferred */
-typedef struct sg_io_hdr Sg_io_hdr;
-typedef struct sg_io_vec Sg_io_vec;
-typedef struct sg_scsi_id Sg_scsi_id;
-typedef struct sg_req_info Sg_req_info;
-
-
-/* vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv */
-/*   The older SG interface based on the 'sg_header' structure follows.   */
-/* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */
-
-#define SG_MAX_SENSE 16   /* this only applies to the sg_header interface */
-
-struct sg_header
- {
-   /* Length of incoming packet (including header).  */
-   int pack_len;
-   /* Maximal length of expected reply.  */
-   int reply_len;
-   /* Id number of packet.  */
-   int pack_id;
-   /* 0==ok, otherwise error number.  */
-   int result;
-   /* Force 12 byte command length for group 6 & 7 commands.  */
-   unsigned int twelve_byte:1;
-   /* SCSI status from target.  */
-   unsigned int target_status:5;
-   /* Host status (see "DID" codes).  */
-   unsigned int host_status:8;
-   /* Driver status+suggestion.  */
-   unsigned int driver_status:8;
-   /* Unused.  */
-   unsigned int other_flags:10;
-   /* Output in 3 cases:
-      when target_status is CHECK_CONDITION or
-      when target_status is COMMAND_TERMINATED or
-      when (driver_status & DRIVER_SENSE) is true.  */
-   unsigned char sense_buffer[SG_MAX_SENSE];
- };
-
-
-/* IOCTLs: The following are not required (or ignored) when the sg_io_hdr_t
-	   interface is used. They are kept for backward compatibility with
-	   the original and version 2 drivers. */
-
-#define SG_SET_TIMEOUT		0x2201	/* Set timeout; *(int *)arg==timeout.  */
-#define SG_GET_TIMEOUT		0x2202	/* Get timeout; return timeout.  */
-
-/* Get/set command queuing state per fd (default is SG_DEF_COMMAND_Q). */
-#define SG_GET_COMMAND_Q	0x2270	/* Yields 0 (queuing off) or 1 (on).  */
-#define SG_SET_COMMAND_Q 	0x2271	/* Change queuing state with 0 or 1.  */
-
-/* Turn on error sense trace (1..8), dump this device to log/console (9)
-   or dump all sg device states ( >9 ) to log/console.  */
-#define SG_SET_DEBUG		0x227e	/* 0 -> turn off debug */
-
-#define SG_NEXT_CMD_LEN		0x2283	/* Override SCSI command length with given
-					   number on the next write() on this file
-					   descriptor.  */
-
-/* Defaults, commented if they differ from original sg driver */
-#define SG_DEFAULT_TIMEOUT (60*HZ) /* HZ == 'jiffies in 1 second' */
-#define SG_DEF_COMMAND_Q 0     /* command queuing is always on when
-				  the new interface is used */
-#define SG_DEF_UNDERRUN_FLAG 0
-
-
-#endif	/* scsi/sg.h */
diff --git a/mdk-stage1/dietlibc/include/setjmp.h b/mdk-stage1/dietlibc/include/setjmp.h
deleted file mode 100644
index 66fc288f4..000000000
--- a/mdk-stage1/dietlibc/include/setjmp.h
+++ /dev/null
@@ -1,123 +0,0 @@
-#ifndef _SETJMP_H
-#define _SETJMP_H
-
-#include <sys/cdefs.h>
-
-#ifdef __i386__
-#ifndef __ASSEMBLER__
-typedef int __jmp_buf[6];
-#endif
-# define JB_BX	0
-# define JB_SI	1
-# define JB_DI	2
-# define JB_BP	3
-# define JB_SP	4
-# define JB_PC	5
-# define JB_SIZE 24
-#endif
-
-#ifdef __alpha__
-#define JB_S0  0
-#define JB_S1  1
-#define JB_S2  2
-#define JB_S3  3
-#define JB_S4  4
-#define JB_S5  5
-#define JB_PC  6
-#define JB_FP  7
-#define JB_SP  8
-#define JB_F2  9
-#define JB_F3  10
-#define JB_F4  11
-#define JB_F5  12
-#define JB_F6  13
-#define JB_F7  14
-#define JB_F8  15
-#define JB_F9  16
-#ifndef __ASSEMBLER__
-typedef long int __jmp_buf[17];
-#endif
-#endif
-
-#ifdef __mips__
-#ifndef __ASSEMBLER__
-typedef struct
-  {
-    void * __pc;	/* Program counter.  */
-    void * __sp;	/* Stack pointer.  */
-    int __regs[8];	/* Callee-saved registers s0 through s7.  */
-    void * __fp;	/* The frame pointer.  */
-    void * __gp;	/* The global pointer.  */
-    int __fpc_csr;	/* Floating point status register.  */
-    double __fpregs[6];	/* Callee-saved floating point registers.  */
-  } __jmp_buf[1];
-#endif
-#endif
-
-#ifdef __sparc__
-#define JB_SP  0
-#define JB_FP  1
-#define JB_PC  2
-#ifndef __ASSEMBLER__
-typedef int __jmp_buf[3];
-#endif
-#endif
-
-#ifdef __arm__
-#define __JMP_BUF_SP            8
-#ifndef __ASSEMBLER__
-typedef int __jmp_buf[10];
-#endif
-#endif
-
-#ifdef __powerpc__
-# define JB_GPR1   0  /* Also known as the stack pointer */
-# define JB_GPR2   1
-# define JB_LR     2  /* The address we will return to */
-# define JB_GPRS   3  /* GPRs 14 through 31 are saved, 18 in total */
-# define JB_CR     21 /* Condition code registers. */
-# define JB_FPRS   22 /* FPRs 14 through 31 are saved, 18*2 words total */
-# define JB_SIZE   (58*4)
-#ifndef __ASSEMBLER__
-typedef long int __jmp_buf[58];
-#endif
-#endif
-
-#ifndef __ASSEMBLER__
-
-typedef int sig_atomic_t;
-#define __sig_atomic_t sig_atomic_t
-
-# define _SIGSET_NWORDS	(1024 / (8 * sizeof (unsigned long int)))
-typedef struct
-  {
-    unsigned long int __val[_SIGSET_NWORDS];
-  } __sigset_t;
-
-/* Calling environment, plus possibly a saved signal mask.  */
-typedef struct __jmp_buf_tag	/* C++ doesn't like tagless structs.  */
-  {
-    /* NOTE: The machine-dependent definitions of `__sigsetjmp'
-       assume that a `jmp_buf' begins with a `__jmp_buf'.
-       Do not move this member or add others before it.  */
-    __jmp_buf __jmpbuf;		/* Calling environment.  */
-    int __mask_was_saved;	/* Saved the signal mask?  */
-    __sigset_t __saved_mask;	/* Saved signal mask.  */
-  } jmp_buf[1];
-
-extern int __sigsetjmp (jmp_buf __env, int __savemask) __THROW;
-
-extern void longjmp (jmp_buf __env, int __val)
-     __THROW __attribute__ ((__noreturn__));
-
-typedef jmp_buf sigjmp_buf;
-
-extern void siglongjmp (sigjmp_buf __env, int __val)
-     __THROW __attribute__ ((__noreturn__));
-
-#define setjmp(env) __sigsetjmp(env,0)
-#define sigsetjmp(a,b) __sigsetjmp(a,b)
-
-#endif
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/shadow.h b/mdk-stage1/dietlibc/include/shadow.h
deleted file mode 100644
index 4d6341af1..000000000
--- a/mdk-stage1/dietlibc/include/shadow.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _SHADOW_H
-#define _SHADOW_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-struct spwd {
-	char *sp_namp;		/* user login name */
-	char *sp_pwdp;		/* encrypted password */
-	long  sp_lstchg;	/* last password change */
-	int   sp_min;		/* days until change allowed. */
-	int   sp_max;		/* days before change required */
-	int   sp_warn;		/* days warning for expiration */
-	int   sp_inact;		/* days before  account  inactive */
-	int   sp_expire;	/* date when account expires */
-	int   sp_flag;		/* reserved for future use */
-};
-
-extern struct spwd *getspent(void) __THROW;
-extern void setspent(void) __THROW;
-extern void endspent(void) __THROW;
-extern struct spwd *getspnam (__const char *__name) __THROW;
-
-#endif /* _SHADOW_H */
diff --git a/mdk-stage1/dietlibc/include/signal.h b/mdk-stage1/dietlibc/include/signal.h
deleted file mode 100644
index 9ed93fe83..000000000
--- a/mdk-stage1/dietlibc/include/signal.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef _SIGNAL_H
-#define _SIGNAL_H
-
-#include <sys/cdefs.h>
-
-#define __WANT_POSIX1B_SIGNALS__
-
-#include <linux/types.h>
-#include <linux/signal.h>
-
-typedef void (*sighandler_t)(int);
-
-int sigemptyset(sigset_t *set) __THROW;
-int sigfillset(sigset_t *set) __THROW;
-int sigaddset(sigset_t *set, int signum) __THROW;
-int sigdelset(sigset_t *set, int signum) __THROW;
-int sigprocmask(int how, const sigset_t *set, sigset_t *oldset) __THROW;
-sighandler_t signal(int signum, sighandler_t action);
-int raise (int sig) __THROW;
-int sigaction(int signum, const struct sigaction *act, struct sigaction *oldact) __THROW;
-int sigaltstack(const struct sigaltstack *newstack, struct sigaltstack *oldstack) __THROW;
-
-#ifndef SIGCLD
-#define SIGCLD SIGCHLD
-#endif
-
-extern const char *const sys_siglist[];
-
-typedef __sighandler_t sig_t;
-
-#ifndef NSIG
-#define NSIG _NSIG
-#endif
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/stdint.h b/mdk-stage1/dietlibc/include/stdint.h
deleted file mode 100644
index d287e6794..000000000
--- a/mdk-stage1/dietlibc/include/stdint.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _STDINT_H
-#define _STDINT_H
-
-#include <sys/types.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/stdio.h b/mdk-stage1/dietlibc/include/stdio.h
deleted file mode 100644
index 92d9dc0cb..000000000
--- a/mdk-stage1/dietlibc/include/stdio.h
+++ /dev/null
@@ -1,97 +0,0 @@
-#ifndef _STDIO_H
-#define _STDIO_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-typedef struct __stdio_file FILE;
-
-FILE *fopen (const char *path, const char *mode) __THROW;
-FILE *fdopen (int fildes, const char *mode) __THROW;
-FILE *freopen (const char *path, const char *mode, FILE *stream) __THROW;
-
-int printf(const char *format, ...) __THROW;
-int fprintf(FILE *stream, const char *format, ...) __THROW;
-int sprintf(char *str, const char *format, ...) __THROW;
-int snprintf(char *str, size_t size, const char *format, ...) __THROW;
-int asprintf(char **ptr, const char* format, ...) __THROW;
-
-int scanf( const char *format, ...) __THROW;
-int fscanf( FILE *stream, const char *format, ...) __THROW;
-int sscanf( const char *str, const char *format, ...) __THROW;
-
-#include <stdarg.h>
-
-int vprintf(const char *format, va_list ap) __THROW;
-int vfprintf(FILE *stream, const char *format, va_list ap) __THROW;
-int vsprintf(char *str, const char *format, va_list ap) __THROW;
-int vsnprintf(char *str, size_t size, const char *format, va_list ap) __THROW;
-
-int vscanf( const char *format, va_list ap) __THROW;
-int vsscanf( const char *str, const char *format, va_list ap) __THROW;
-int vfscanf( FILE *stream, const char *format, va_list ap) __THROW;
-
-int fgetc(FILE *stream) __THROW;
-char *fgets(char *s, int size, FILE *stream) __THROW;
-int getc(FILE *stream) __THROW;
-int getchar(void) __THROW;
-char *gets(char *s) __THROW;
-int ungetc(int c, FILE *stream) __THROW;
-
-int fputc(int c, FILE *stream) __THROW;
-int fputs(const char *s, FILE *stream) __THROW;
-
-#define putc(c,stream) fputc(c,stream)
-#define putchar(c) fputc(c,stdout)
-
-#define getchar() fgetc(stdin)
-#define getc(stream) fgetc(stream)
-
-int puts(const char *s) __THROW;
-
-long fseek( FILE *stream, long offset, int whence) __THROW;
-long ftell( FILE *stream) __THROW;
-void rewind( FILE *stream) __THROW;
-int fgetpos( FILE *stream, fpos_t *pos) __THROW;
-int fsetpos( FILE *stream, fpos_t *pos) __THROW;
-
-size_t fread( void *ptr, size_t size, size_t nmemb, FILE *stream) __THROW;
-
-size_t fwrite( const void *ptr, size_t size, size_t nmemb, FILE *stream) __THROW;
-
-int fflush(FILE *stream) __THROW;
-
-int fclose(FILE *stream) __THROW;
-
-void clearerr(FILE *stream) __THROW;
-int feof (FILE *stream) __THROW;
-int ferror( FILE *stream) __THROW;
-int fileno( FILE *stream) __THROW;
-
-int remove(const char *pathname) __THROW;
-
-void perror(const char *s) __THROW;
-
-extern FILE *stdin, *stdout, *stderr;
-
-#define EOF (int)(-1)
-
-#define BUFSIZ 128
-
-#define _IONBF 0
-#define _IOLBF 1
-#define _IOFBF 2
-
-int setvbuf(FILE *stream, char *buf, int mode , size_t size) __THROW;
-
-#define setbuf(stream,buf) setvbuf(stream,buf,buf?_IOFBF:_IONBF,BUFSIZ)
-#define setbuffer(stream,buf,size) setvbuf(stream,buf,buf?_IOFBF:_IONBF,size)
-#define setlinebuf(stream) setvbuf(stream,0,_IOLBF,BUFSIZ)
-
-FILE *popen(const char *command, const char *type) __THROW;
-int pclose(FILE *stream) __THROW;
-
-#define getc_unlocked(stream) getc(stream)
-#define putc_unlocked(c,stream) putc(c,stream)
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/stdlib.h b/mdk-stage1/dietlibc/include/stdlib.h
deleted file mode 100644
index 6a13a48ff..000000000
--- a/mdk-stage1/dietlibc/include/stdlib.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _STDLIB_H
-#define _STDLIB_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#define __LIBC_DIETLIBC__
-
-void *calloc(size_t nmemb, size_t size) __THROW;
-void *malloc(size_t size) __THROW;
-void free(void *ptr) __THROW;
-void *realloc(void *ptr, size_t size) __THROW;
-
-char *getenv(const char *name) __THROW __pure__;
-int putenv(const char *string) __THROW;
-int setenv(const char *name, const char *value, int overwrite) __THROW;
-void unsetenv(const char *name) __THROW;
-
-int atexit(void (*function)(void)) __THROW;
-
-double strtod(const char *nptr, char **endptr) __THROW;
-long int strtol(const char *nptr, char **endptr, int base) __THROW;
-unsigned long int strtoul(const char *nptr, char **endptr, int base) __THROW;
-
-int __ltostr(char *s, int size, unsigned long i, int base, char UpCase) __THROW;
-#ifdef __GNUC__
-long long int strtoll(const char *nptr, char **endptr, int base) __THROW;
-unsigned long long int strtoull(const char *nptr, char **endptr, int base) __THROW;
-int __lltostr(char *s, int size, unsigned long long i, int base, char UpCase) __THROW;
-#endif
-
-int atoi(const char *nptr) __THROW;
-long int atol(const char *nptr) __THROW;
-double atof(const char *nptr) __THROW;
-
-void exit(int status) __THROW __attribute__((noreturn));
-void abort(void) __THROW;
-
-/* warning: the rand() implementation of the diet libc really sucks. */
-#define RAND_MAX 32767
-
-extern int rand(void) __THROW;
-extern void srand(unsigned int seed) __THROW;
-
-void qsort(void *base, size_t nmemb, size_t size, int (*compar)(const void *, const void *)) __THROW;
-void *bsearch(const void *key, const void *base, size_t nmemb, size_t size, int (*compar)(const void *, const void *)) __THROW;
-
-extern char **environ;
-
-#define EXIT_SUCCESS 0
-#define EXIT_FAILURE 1
-
-/* now this function is the greatest bullshit I have ever seen.
- * The ISO people must be out of their minds. */
-typedef struct { int quot,rem; } div_t;
-div_t div(int numer, int denom) __THROW __attribute__((const));
-
-void *alloca(size_t size) __THROW; /* gcc built-in */
-
-char *realpath(const char *path, char *resolved_path) __THROW;
-
-int abs(int j) __THROW;
-
-long int random(void) __THROW;
-void srandom(unsigned int seed) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/string.h b/mdk-stage1/dietlibc/include/string.h
deleted file mode 100644
index 1ef78ae54..000000000
--- a/mdk-stage1/dietlibc/include/string.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef _STRING_H
-#define _STRING_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-char *strcpy(char *dest, const char *src) __THROW;
-char *strncpy(char *dest, const char *src, size_t n) __THROW;
-
-void *memccpy(void *dest, const void *src, int c, size_t n) __THROW;
-void *memcpy(void *dest, const void *src, size_t n) __THROW;
-void *memmove(void *dest, const void *src, size_t n) __THROW;
-
-int memccmp(const void *s1, const void *s2, int c, size_t n) __THROW __pure__;
-int memcmp(const void *s1, const void *s2, size_t n) __THROW __pure__;
-int strcmp(const char *s1, const char *s2) __THROW __pure__;
-int strncmp(const char *s1, const char *s2, size_t n) __THROW __pure__;
-
-int strcasecmp(const char *s1, const char *s2) __THROW __pure__;
-int strncasecmp(const char *s1, const char *s2, size_t n) __THROW __pure__;
-
-size_t strlen(const char *s) __THROW __pure__;
-
-char *strstr(const char *haystack, const char *needle) __THROW __pure__;
-
-char *strdup(const char *s) __THROW;
-
-char *strchr(const char *s, int c) __THROW __pure__;
-char *strrchr(const char *s, int c) __THROW __pure__;
-
-char *strcat(char *dest, const char *src) __THROW;
-char *strncat(char *dest, const char *src, size_t n) __THROW;
-
-size_t strspn(const char *s, const char *accept) __THROW;
-size_t strcspn(const char *s, const char *reject) __THROW;
-
-char *strpbrk(const char *s, const char *accept) __THROW;
-char *strsep(char **stringp, const char *delim) __THROW;
-
-void* memset(void *s, int c, size_t n) __THROW;
-
-#undef NULL
-#define NULL (void*)0
-
-#define bzero(s,n) memset(s,0,n)
-#define bcopy(src,dest,n) memmove(dest,src,n)
-#define bcmp(a,b,n) memcmp(a,b,n)
-
-char *strerror(int errnum) __THROW;
-char *strsignal(int signum) __THROW;
-
-char *strtok(char *s, const char *delim) __THROW;
-char *strtok_r(char *s, const char *delim, char **ptrptr) __THROW;
-
-int ffs(int i) __THROW __attribute__((__const__));
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/strings.h b/mdk-stage1/dietlibc/include/strings.h
deleted file mode 100644
index ec947a9b9..000000000
--- a/mdk-stage1/dietlibc/include/strings.h
+++ /dev/null
@@ -1,2 +0,0 @@
-#warning "your code included obsolescent <strings.h>.  Please change that to <string.h>!"
-#include <string.h>
diff --git a/mdk-stage1/dietlibc/include/sys/cdefs.h b/mdk-stage1/dietlibc/include/sys/cdefs.h
deleted file mode 100644
index 895bb74b8..000000000
--- a/mdk-stage1/dietlibc/include/sys/cdefs.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _SYS_CDEFS_H
-#define _SYS_CDEFS_H
-
-#define __dietlibc__
-
-#ifndef __cplusplus
-#define throw ()
-#define __THROW
-#define __BEGIN_DECLS
-#define __END_DECLS
-#else
-#define __THROW throw ()
-#define __BEGIN_DECLS extern "C" {
-#define __END_DECLS }
-#endif
-
-#ifndef __GNUC__
-#define __attribute__(xyz)
-#endif
-
-#define __pure__
-#ifdef __GNUC__
-#if (__GNUC__ > 2) || ((__GNUC__ == 2) && (__GNUC_MINOR__ >= 96))
-#undef __pure__
-#define __pure__ __attribute__ ((__pure__))
-#endif
-
-#if (__GNUC__ == 2) && (__GNUC_MINOR__ < 95)
-#define __restrict__
-#endif
-
-#endif
-
-#define __P(x) x
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/file.h b/mdk-stage1/dietlibc/include/sys/file.h
deleted file mode 100644
index 93787fd42..000000000
--- a/mdk-stage1/dietlibc/include/sys/file.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _SYS_FILE_H
-#define _SYS_FILE_H
-
-#include <sys/cdefs.h>
-
-extern int fcntl(int fd, int cmd, ...) __THROW;
-extern int flock(int fd, int operation) __THROW;
-
-/* Operations for the `flock' call.  */
-#define	LOCK_SH	1	/* Shared lock.  */
-#define	LOCK_EX	2 	/* Exclusive lock.  */
-#define	LOCK_UN	8	/* Unlock.  */
-
-/* Can be OR'd in to one of the above.  */
-#define	LOCK_NB	4	/* Don't block when locking.  */
-
-
-
-#endif	/* _SYS_FILE_H */
diff --git a/mdk-stage1/dietlibc/include/sys/io.h b/mdk-stage1/dietlibc/include/sys/io.h
deleted file mode 100644
index cce841735..000000000
--- a/mdk-stage1/dietlibc/include/sys/io.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef _IO_H
-#define _IO_H
-
-int ioperm(unsigned long from, unsigned long num, int turn_on) __THROW;
-
-#ifdef __i386__
-
-static __inline void
-outb (unsigned char value, unsigned short int port)
-{
-  __asm__ __volatile__ ("outb %b0,%w1": :"a" (value), "Nd" (port));
-}
-
-static __inline unsigned char
-inb (unsigned short int port)
-{
-  unsigned char _v;
-
-  __asm__ __volatile__ ("inb %w1,%0":"=a" (_v):"Nd" (port));
-  return _v;
-}
-
-static __inline unsigned short int
-inw (unsigned short int port)
-{
-  unsigned short _v;
-
-  __asm__ __volatile__ ("inw %w1,%0":"=a" (_v):"Nd" (port));
-  return _v;
-}
-
-static __inline void
-outw (unsigned short int value, unsigned short int port)
-{
-  __asm__ __volatile__ ("outw %w0,%w1": :"a" (value), "Nd" (port));
-
-}
-
-#endif
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/ioctl.h b/mdk-stage1/dietlibc/include/sys/ioctl.h
deleted file mode 100644
index fca1aeeab..000000000
--- a/mdk-stage1/dietlibc/include/sys/ioctl.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _IOCTL_H
-#define _IOCTL_H
-
-#include <sys/cdefs.h>
-#include <linux/ioctl.h>
-#include <asm/ioctls.h>
-
-int ioctl(int d, int request, ...) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/ipc.h b/mdk-stage1/dietlibc/include/sys/ipc.h
deleted file mode 100644
index 9184a2a82..000000000
--- a/mdk-stage1/dietlibc/include/sys/ipc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _SYS_IPC_H
-#define _SYS_IPC_H
-
-#include <sys/cdefs.h>
-#include <linux/ipc.h>
-#include <asm/page.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/kd.h b/mdk-stage1/dietlibc/include/sys/kd.h
deleted file mode 100644
index 9e9a5152b..000000000
--- a/mdk-stage1/dietlibc/include/sys/kd.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _SYS_KD_H
-#define _SYS_KD_H
-
-#include <linux/kd.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/mman.h b/mdk-stage1/dietlibc/include/sys/mman.h
deleted file mode 100644
index dc398ba90..000000000
--- a/mdk-stage1/dietlibc/include/sys/mman.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _SYS_MMAN_H
-#define _SYS_MMAN_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <linux/mman.h>
-#include <asm/page.h>
-
-#ifndef PAGE_SIZE
-#warning PAGE_SIZE undefined
-#endif
-
-#define MAP_FAILED      ((void *) -1)
-
-extern void *mmap (void *__addr, size_t __len, int __prot,
-                   int __flags, int __fd, off_t __offset);
-
-extern int munmap (void *__addr, size_t __len) __THROW;
-extern int mprotect (void *__addr, size_t __len, int __prot) __THROW;
-extern int msync (void *__addr, size_t __len, int __flags) __THROW;
-extern void *mremap (void *__addr, size_t __old_len, size_t __new_len,
-		     int __may_move) __THROW;
-extern int mincore (void *__start, size_t __len, unsigned char *__vec);
-
-#ifdef __quad_t
-extern void *mmap64 (void *__addr, size_t __len, int __prot,
-		     int __flags, int __fd, off64_t __offset) __THROW;
-#endif
-
-int mlockall(int flags) __THROW;
-int munlockall(void) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/mount.h b/mdk-stage1/dietlibc/include/sys/mount.h
deleted file mode 100644
index 2e9e86774..000000000
--- a/mdk-stage1/dietlibc/include/sys/mount.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _SYS_MOUNT_H
-#define _SYS_MOUNT_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <linux/fs.h>
-
-int  mount(const char* specialfile, const char* dir, const char* filesystemtype,
-	   unsigned long rwflag, const void * data) __THROW;
-
-int umount(const char *specialfile) __THROW;
-
-int umount(const char *dir) __THROW;
-
-int umount2(const char *specialfile, int mflag) __THROW;
-
-int umount2(const char *dir, int mflag) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/msg.h b/mdk-stage1/dietlibc/include/sys/msg.h
deleted file mode 100644
index ea1e470b6..000000000
--- a/mdk-stage1/dietlibc/include/sys/msg.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _SYS_MSG_H
-#define _SYS_MSG_H
-
-#include <linux/msg.h>
-#include <sys/ipc.h>
-#include <asm/page.h>
-
-extern int msgctl (int msqid, int cmd, struct msqid_ds *buf) __THROW;
-extern int msgget (key_t key, int msgflg) __THROW;
-extern int msgrcv (int msqid, void *msgp, size_t msgsz, long int msgtyp, int msgflg) __THROW;
-extern int msgsnd (int msqid, const void *msgp, size_t msgsz, int msgflg) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/mtio.h b/mdk-stage1/dietlibc/include/sys/mtio.h
deleted file mode 100644
index e70663407..000000000
--- a/mdk-stage1/dietlibc/include/sys/mtio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _SYS_MTIO_H
-#define _SYS_MTIO_H
-
-#include <linux/mtio.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/param.h b/mdk-stage1/dietlibc/include/sys/param.h
deleted file mode 100644
index 05f4d40e2..000000000
--- a/mdk-stage1/dietlibc/include/sys/param.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _SYS_PARAM_H
-#define _SYS_PARAM_H
-
-#include <limits.h>
-
-#define MAXPATHLEN     PATH_MAX
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/poll.h b/mdk-stage1/dietlibc/include/sys/poll.h
deleted file mode 100644
index adce26687..000000000
--- a/mdk-stage1/dietlibc/include/sys/poll.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _SYS_POLL_H
-#define _SYS_POLL_H
-
-#include <sys/cdefs.h>
-
-#include <linux/poll.h>
-
-extern int poll(struct pollfd *ufds, unsigned int nfds, int timeout) __THROW;
-
-
-#endif	/* _SYS_POLL_H */
diff --git a/mdk-stage1/dietlibc/include/sys/ptrace.h b/mdk-stage1/dietlibc/include/sys/ptrace.h
deleted file mode 100644
index 9dd730bc6..000000000
--- a/mdk-stage1/dietlibc/include/sys/ptrace.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _SYS_PTRACE_H
-#define _SYS_PTRACE_H
-
-#include <sys/cdefs.h>
-
-#include <linux/ptrace.h>
-
-extern long int ptrace (int request, ...) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/reboot.h b/mdk-stage1/dietlibc/include/sys/reboot.h
deleted file mode 100644
index ba58d296a..000000000
--- a/mdk-stage1/dietlibc/include/sys/reboot.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _SYS_REBOOT_H
-#define _SYS_REBOOT_H
-
-#include <linux/reboot.h>
-
-/* Reboot or halt the system.  */
-int reboot (int flag, void *arg);
-
-#endif	/* _SYS_REBOOT_H */
diff --git a/mdk-stage1/dietlibc/include/sys/resource.h b/mdk-stage1/dietlibc/include/sys/resource.h
deleted file mode 100644
index 442434cd1..000000000
--- a/mdk-stage1/dietlibc/include/sys/resource.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _SYS_RESOURCE_H
-#define _SYS_RESOURCE_H
-
-#include <sys/cdefs.h>
-#include <linux/resource.h>
-
-int getpriority(int which, int who) __THROW;
-int setpriority(int which, int who, int prio) __THROW;
-
-int getrlimit (int resource, struct rlimit *rlim);
-int getrusage (int who, struct rusage *usage);
-int setrlimit (int resource, const struct rlimit *rlim);
-
-typedef unsigned long rlim_t;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/select.h b/mdk-stage1/dietlibc/include/sys/select.h
deleted file mode 100644
index e69de29bb..000000000
--- a/mdk-stage1/dietlibc/include/sys/select.h
+++ /dev/null
diff --git a/mdk-stage1/dietlibc/include/sys/sem.h b/mdk-stage1/dietlibc/include/sys/sem.h
deleted file mode 100644
index cc182649c..000000000
--- a/mdk-stage1/dietlibc/include/sys/sem.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _SYS_SEM_H
-#define _SYS_SEM_H
-
-#include <linux/sem.h>
-#include <sys/ipc.h>
-
-extern int semget( key_t key, int nsems, int semflg) __THROW;
-extern int semctl(int semid, int semnum, int cmd, union semun arg) __THROW;
-extern int semop(int semid, struct sembuf *sops, unsigned nsops) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/sendfile.h b/mdk-stage1/dietlibc/include/sys/sendfile.h
deleted file mode 100644
index 2e0c04add..000000000
--- a/mdk-stage1/dietlibc/include/sys/sendfile.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _SYS_SENDFILE_H
-#define _SYS_SENDFILE_H
-
-#include <sys/cdefs.h>
-
-extern ssize_t sendfile (int __out_fd, int __in_fd, off_t *offset,
-			 size_t __count) __THROW;
-
-#endif	/* sys/sendfile.h */
diff --git a/mdk-stage1/dietlibc/include/sys/shm.h b/mdk-stage1/dietlibc/include/sys/shm.h
deleted file mode 100644
index c27f5ddcf..000000000
--- a/mdk-stage1/dietlibc/include/sys/shm.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _SYS_SHM_H
-#define _SYS_SHM_H
-
-#include <linux/shm.h>
-#include <sys/ipc.h>
-#include <asm/page.h>
-
-#ifndef PAGE_SIZE
-#define PAGE_SIZE getpagesize()
-#endif
-
-extern int shmget(key_t key, int size, int shmflg) __THROW;
-extern void *shmat(int shmid, const void *shmaddr, int shmflg) __THROW;
-extern int shmdt (const void *shmaddr) __THROW;
-extern int shmctl(int shmid, int cmd, struct shmid_ds *buf) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/signal.h b/mdk-stage1/dietlibc/include/sys/signal.h
deleted file mode 100644
index 2e602dad8..000000000
--- a/mdk-stage1/dietlibc/include/sys/signal.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <signal.h>
diff --git a/mdk-stage1/dietlibc/include/sys/socket.h b/mdk-stage1/dietlibc/include/sys/socket.h
deleted file mode 100644
index a1435501c..000000000
--- a/mdk-stage1/dietlibc/include/sys/socket.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef _SYS_SOCKET_H
-#define _SYS_SOCKET_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <linux/socket.h>
-
-#ifndef SOCK_DGRAM
-/* the Linux kernel headers suck really badly on non-x86 */
-#define SOCK_STREAM	1		/* stream (connection) socket	*/
-#define SOCK_DGRAM	2		/* datagram (conn.less) socket	*/
-#define SOCK_RAW	3		/* raw socket			*/
-#define SOCK_RDM	4		/* reliably-delivered message	*/
-#define SOCK_SEQPACKET	5		/* sequential packet socket	*/
-#define SOCK_PACKET	10		/* linux specific way of	*/
-#endif
-
-struct sockaddr_storage {
-  char __tmp[sizeof(struct sockaddr)];
-};
-
-int socket(int domain, int type, int protocol) __THROW;
-int accept(int s, struct sockaddr *addr, socklen_t *addrlen) __THROW;
-int connect(int sockfd, const struct sockaddr *serv_addr, socklen_t addrlen) __THROW;
-int bind(int sockfd, struct sockaddr *my_addr, socklen_t addrlen) __THROW;
-int recv(int s, void *buf, size_t len, int flags) __THROW;
-int recvfrom(int s, void *buf, size_t len, int flags, struct sockaddr *from, socklen_t *fromlen) __THROW;
-int recvmsg(int s, struct msghdr *msg, int flags) __THROW;
-int send(int s, const void *msg, size_t len, int flags) __THROW;
-int sendto(int s, const void *msg, size_t len, int flags, const struct sockaddr *to, socklen_t tolen) __THROW;
-int sendmsg(int s, const struct msghdr *msg, int flags) __THROW;
-
-int getpeername(int s, struct sockaddr *name, socklen_t *namelen) __THROW;
-int getsockname(int  s , struct sockaddr * name , socklen_t * namelen) __THROW;
-
-int getsockopt(int s, int level, int optname, void *optval, socklen_t *optlen) __THROW;
-int setsockopt(int s, int level, int optname, const void *optval, socklen_t optlen) __THROW;
-
-int listen(int s, int backlog) __THROW;
-
-#define SHUT_RD 0
-#define SHUT_WR 1
-#define SHUT_RDWR 2
-int shutdown(int s, int how) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/stat.h b/mdk-stage1/dietlibc/include/sys/stat.h
deleted file mode 100644
index 10fddfa42..000000000
--- a/mdk-stage1/dietlibc/include/sys/stat.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _SYS_STAT_H
-#define _SYS_STAT_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <linux/stat.h>
-#include <asm/stat.h>
-
-#ifndef STAT64_HAS_BROKEN_ST_INO
-#define __NO_STAT64
-#endif
-
-extern int stat(const char *__file, struct stat *__buf) __THROW;
-extern int fstat(int __fd, struct stat *__buf) __THROW;
-extern int lstat(const char *__file, struct stat *__buf) __THROW;
-
-#ifdef __NO_STAT64
-#undef _FILE_OFFSET_BITS
-#else
-extern int stat64(const char *__file, struct stat64 *__buf) __THROW;
-extern int fstat64(int __fd, struct stat64 *__buf) __THROW;
-extern int lstat64(const char *__file, struct stat64 *__buf) __THROW;
-#endif
-
-#if _FILE_OFFSET_BITS == 64
-#define lstat(file,buf) lstat64(file,buf)
-#define fstat(file,buf) fstat64(file,buf)
-#define stat stat64
-#endif
-
-#define major(dev) (((dev)>>8) & 0xff)
-#define minor(dev) ((dev) & 0xff)
-#define makedev(major, minor) ((((unsigned int) (major)) << 8) | ((unsigned int) (minor)))
-
-extern int chmod (const char *__file, mode_t __mode) __THROW;
-
-extern int fchmod (int __fd, mode_t __mode) __THROW;
-
-extern mode_t umask (mode_t __mask) __THROW;
-
-extern int mkdir (const char *__path, mode_t __mode) __THROW;
-
-extern int mknod (const char *__path, mode_t __mode, dev_t __dev) __THROW;
-
-extern int mkfifo (const char *__path, mode_t __mode) __THROW;
-
-#define S_IREAD S_IRUSR
-#define S_IWRITE S_IWUSR
-#define S_IEXEC S_IXUSR
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/syscall.h b/mdk-stage1/dietlibc/include/sys/syscall.h
deleted file mode 100644
index 5d6b5a4ad..000000000
--- a/mdk-stage1/dietlibc/include/sys/syscall.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _SYSCALL_H
-#define _SYSCALL_H
-
-#include <asm/unistd.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/sysinfo.h b/mdk-stage1/dietlibc/include/sys/sysinfo.h
deleted file mode 100644
index 5f059d469..000000000
--- a/mdk-stage1/dietlibc/include/sys/sysinfo.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _SYS_SYSINFO_H
-#define _SYS_SYSINFO_H
-
-#include <sys/cdefs.h>
-#include <linux/kernel.h>
-
-int sysinfo(struct sysinfo *info) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/syslog.h b/mdk-stage1/dietlibc/include/sys/syslog.h
deleted file mode 100644
index 91bf0d1fa..000000000
--- a/mdk-stage1/dietlibc/include/sys/syslog.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef _SYS_SYSLOG_H
-#define _SYS_SYSLOG_H 1
-
-#include <sys/cdefs.h>
-#include <stdarg.h>
-
-#define _PATH_LOG	"/dev/log"
-
-/*
- * priorities/facilities are encoded into a single 32-bit quantity, where the
- * bottom 3 bits are the priority (0-7) and the top 28 bits are the facility
- * (0-big number).  Both the priorities and the facilities map roughly
- * one-to-one to strings in the syslogd(8) source code.  This mapping is
- * included in this file.
- *
- * priorities (these are ordered)
- */
-#define LOG_EMERG	0	/* system is unusable */
-#define LOG_ALERT	1	/* action must be taken immediately */
-#define LOG_CRIT	2	/* critical conditions */
-#define LOG_ERR		3	/* error conditions */
-#define LOG_WARNING	4	/* warning conditions */
-#define LOG_NOTICE	5	/* normal but significant condition */
-#define LOG_INFO	6	/* informational */
-#define LOG_DEBUG	7	/* debug-level messages */
-
-#define LOG_PRIMASK	0x07	/* mask to extract priority part (internal) */
-				/* extract priority */
-#define LOG_PRI(p)	((p) & LOG_PRIMASK)
-#define LOG_MAKEPRI(fac, pri)	(((fac) << 3) | (pri))
-
-/* facility codes */
-#define LOG_KERN	(0<<3)	/* kernel messages */
-#define LOG_USER	(1<<3)	/* random user-level messages */
-#define LOG_MAIL	(2<<3)	/* mail system */
-#define LOG_DAEMON	(3<<3)	/* system daemons */
-#define LOG_AUTH	(4<<3)	/* security/authorization messages */
-#define LOG_SYSLOG	(5<<3)	/* messages generated internally by syslogd */
-#define LOG_LPR		(6<<3)	/* line printer subsystem */
-#define LOG_NEWS	(7<<3)	/* network news subsystem */
-#define LOG_UUCP	(8<<3)	/* UUCP subsystem */
-#define LOG_CRON	(9<<3)	/* clock daemon */
-#define LOG_AUTHPRIV	(10<<3)	/* security/authorization messages (private) */
-#define LOG_FTP		(11<<3)	/* ftp daemon */
-
-	/* other codes through 15 reserved for system use */
-#define LOG_LOCAL0	(16<<3)	/* reserved for local use */
-#define LOG_LOCAL1	(17<<3)	/* reserved for local use */
-#define LOG_LOCAL2	(18<<3)	/* reserved for local use */
-#define LOG_LOCAL3	(19<<3)	/* reserved for local use */
-#define LOG_LOCAL4	(20<<3)	/* reserved for local use */
-#define LOG_LOCAL5	(21<<3)	/* reserved for local use */
-#define LOG_LOCAL6	(22<<3)	/* reserved for local use */
-#define LOG_LOCAL7	(23<<3)	/* reserved for local use */
-
-#define LOG_NFACILITIES	24	/* current number of facilities */
-#define LOG_FACMASK	0x03f8	/* mask to extract facility part */
-				/* facility of pri */
-#define LOG_FAC(p)	(((p) & LOG_FACMASK) >> 3)
-
-/*
- * arguments to setlogmask.
- */
-#define LOG_MASK(pri)	(1 << (pri))		/* mask for one priority */
-#define LOG_UPTO(pri)	((1 << ((pri)+1)) - 1)	/* all priorities through pri */
-
-/*
- * Option flags for openlog.
- *
- * LOG_ODELAY no longer does anything.
- * LOG_NDELAY is the inverse of what it used to be.
- */
-#define LOG_PID		0x01	/* log the pid with each message */
-#define LOG_CONS	0x02	/* log on the console if errors in sending */
-#define LOG_ODELAY	0x04	/* delay open until first syslog() (default) */
-#define LOG_NDELAY	0x08	/* don't delay open */
-#define LOG_NOWAIT	0x10	/* don't wait for console forks: DEPRECATED */
-#define LOG_PERROR	0x20	/* log to stderr as well */
-
-/* Open connection to system logger.  */
-/* against the glibc-routine ident has not to be const ! */
-/* instead ident is limited to 80 characters ! */
-void openlog (const char *ident, int option, int  facility);
-
-void closelog (void) __THROW;
-
-int setlogmask (int mask) __THROW;
-
-void syslog (int priority, const char *format, ...) __THROW;
-
-void vsyslog (int priority, const char *format, va_list arg_ptr) __THROW;
-
-/* yuck yuck yuck, only needed for syslogd. */
-typedef struct _code {
-  char *c_name;
-  int c_val;
-} CODE;
-
-extern CODE prioritynames[];
-extern CODE facilitynames[];
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/time.h b/mdk-stage1/dietlibc/include/sys/time.h
deleted file mode 100644
index 11144f57b..000000000
--- a/mdk-stage1/dietlibc/include/sys/time.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef _SYS_TIME_H
-#define _SYS_TIME_H	1
-
-#include <sys/cdefs.h>
-
-#include <sys/types.h>
-#include <linux/time.h>
-
-#if defined __USE_GNU || defined __USE_BSD
-typedef struct timezone *__timezone_ptr_t;
-#else
-typedef void *__timezone_ptr_t;
-#endif
-
-int getitimer(int which, struct itimerval *value) __THROW;
-int setitimer(int which, const struct itimerval *value, struct itimerval *ovalue) __THROW;
-
-int gettimeofday(struct timeval *tv, struct timezone *tz) __THROW;
-int settimeofday(const struct timeval *tv , const struct timezone *tz) __THROW;
-
-extern int adjtime (const struct timeval *__delta,
-		    struct timeval *__olddelta) __THROW;
-
-struct tm
-{
-  int tm_sec;			/* Seconds.	[0-60] (1 leap second) */
-  int tm_min;			/* Minutes.	[0-59] */
-  int tm_hour;			/* Hours.	[0-23] */
-  int tm_mday;			/* Day.		[1-31] */
-  int tm_mon;			/* Month.	[0-11] */
-  int tm_year;			/* Year	- 1900.  */
-  int tm_wday;			/* Day of week.	[0-6] */
-  int tm_yday;			/* Days in year.[0-365]	*/
-  int tm_isdst;			/* DST.		[-1/0/1]*/
-
-  long int tm_gmtoff;		/* Seconds east of UTC.  */
-  const char *tm_zone;		/* Timezone abbreviation.  */
-};
-
-struct tm* gmtime(const time_t *t) __THROW;
-struct tm* gmtime_r(const time_t *t, struct tm *r) __THROW;
-
-struct tm* localtime(const time_t *t) __THROW;
-struct tm* localtime_r(const time_t *t, struct tm *r) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/times.h b/mdk-stage1/dietlibc/include/sys/times.h
deleted file mode 100644
index 72ec62fec..000000000
--- a/mdk-stage1/dietlibc/include/sys/times.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _SYS_TIMES_H
-#define _SYS_TIMES_H
-
-#include <linux/times.h>
-
-clock_t times(struct tms *buf);
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/types.h b/mdk-stage1/dietlibc/include/sys/types.h
deleted file mode 100644
index 34dbaa9f1..000000000
--- a/mdk-stage1/dietlibc/include/sys/types.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _SYS_TYPES_H
-#define _SYS_TYPES_H
-
-#include <linux/types.h>
-#include <linux/posix_types.h>
-#include <linux/socket.h>
-
-#ifdef __GNUC__
-#define __quad_t __quad_t
-typedef long long int __quad_t;
-typedef unsigned long long int __u_quad_t;
-#else
-#warning no long long support - no 64 bit file I/O support
-typedef long int __quad_t;
-typedef unsigned long int __u_quad_t;
-#endif
-
-
-#ifdef __quad_t
-typedef __quad_t off64_t;
-typedef __u_quad_t ino64_t;
-typedef __quad_t blkcnt64_t;
-#endif
-
-typedef long int fpos_t;
-
-#define socklen_t socklen_t
-typedef unsigned int socklen_t;
-
-typedef long int blksize_t;
-typedef long int blkcnt_t;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/uio.h b/mdk-stage1/dietlibc/include/sys/uio.h
deleted file mode 100644
index d64fd33c9..000000000
--- a/mdk-stage1/dietlibc/include/sys/uio.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _SYS_UIO
-#define _SYS_UIO 1
-
-#include <linux/uio.h>
-
-int readv(int filedes, const struct iovec *vector, size_t count);
-int writev(int filedes, const struct iovec *vector, size_t count);
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/un.h b/mdk-stage1/dietlibc/include/sys/un.h
deleted file mode 100644
index 213d9290e..000000000
--- a/mdk-stage1/dietlibc/include/sys/un.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef	_SYS_UN_H
-#define	_SYS_UN_H
-
-#include <sys/cdefs.h>
-
-#include <linux/un.h>
-
-#endif	/* sys/un.h  */
diff --git a/mdk-stage1/dietlibc/include/sys/utsname.h b/mdk-stage1/dietlibc/include/sys/utsname.h
deleted file mode 100644
index 37bf6c811..000000000
--- a/mdk-stage1/dietlibc/include/sys/utsname.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef	_SYS_UTSNAME_H
-#define	_SYS_UTSNAME_H	1
-
-#include <sys/cdefs.h>
-
-/* Length of the entries in `struct utsname' is 65.  */
-#define _UTSNAME_LENGTH 65
-#define _UTSNAME_NODENAME_LENGTH _UTSNAME_LENGTH
-
-/* Linux provides as additional information in the `struct utsname'
-   the name of the current domain.  Define _UTSNAME_DOMAIN_LENGTH
-   to a value != 0 to activate this entry.  */
-#define _UTSNAME_DOMAIN_LENGTH _UTSNAME_LENGTH
-
-struct utsname {
-  /* Name of the implementation of the operating system.  */
-  char sysname[_UTSNAME_LENGTH];
-
-  /* Name of this node on the network.  */
-  char nodename[_UTSNAME_NODENAME_LENGTH];
-
-  /* Current release level of this implementation.  */
-  char release[_UTSNAME_LENGTH];
-  /* Current version level of this release.  */
-  char version[_UTSNAME_LENGTH];
-
-  /* Name of the hardware type the system is running on.  */
-  char machine[_UTSNAME_LENGTH];
-
-  /* Name of the domain of this node on the network.  */
-  char domainname[_UTSNAME_DOMAIN_LENGTH];
-};
-
-extern int uname (struct utsname *__name) __THROW;
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/vfs.h b/mdk-stage1/dietlibc/include/sys/vfs.h
deleted file mode 100644
index e4740a225..000000000
--- a/mdk-stage1/dietlibc/include/sys/vfs.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _SYS_VFS_H
-#define _SYS_VFS_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <linux/vfs.h>
-
-int statfs(const char *path, struct statfs *buf) __THROW;
-int fstatfs(int fd, struct statfs *buf) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/wait.h b/mdk-stage1/dietlibc/include/sys/wait.h
deleted file mode 100644
index eb70112e2..000000000
--- a/mdk-stage1/dietlibc/include/sys/wait.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef _SYS_WAIT_H
-#define _SYS_WAIT_H
-
-#include <sys/cdefs.h>
-#include <sys/resource.h>
-#include <linux/wait.h>
-
-/* If WIFEXITED(STATUS), the low-order 8 bits of the status.  */
-#define __WEXITSTATUS(status)	(((status) & 0xff00) >> 8)
-#define WEXITSTATUS __WEXITSTATUS
-
-/* If WIFSIGNALED(STATUS), the terminating signal.  */
-#define __WTERMSIG(status)	((status) & 0x7f)
-#define WTERMSIG __WTERMSIG
-
-/* If WIFSTOPPED(STATUS), the signal that stopped the child.  */
-#define __WSTOPSIG(status)	__WEXITSTATUS(status)
-#define WSTOPSIG __WSTOPSIG
-
-/* Nonzero if STATUS indicates normal termination.  */
-#define WIFEXITED(status)	(__WTERMSIG(status) == 0)
-
-/* Nonzero if STATUS indicates termination by a signal.  */
-#define WIFSIGNALED(status)	(!WIFSTOPPED(status) && !WIFEXITED(status))
-
-/* Nonzero if STATUS indicates the child is stopped.  */
-#define WIFSTOPPED(status)	(((status) & 0xff) == 0x7f)
-
-
-pid_t wait(int *status) __THROW;
-pid_t waitpid(pid_t pid, int *status, int options) __THROW;
-
-pid_t wait3(int *status, int options, struct rusage *rusage) __THROW;
-
-pid_t wait4(pid_t pid, int *status, int options, struct rusage *rusage) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/syslog.h b/mdk-stage1/dietlibc/include/syslog.h
deleted file mode 100644
index 830b4928a..000000000
--- a/mdk-stage1/dietlibc/include/syslog.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <sys/syslog.h>
diff --git a/mdk-stage1/dietlibc/include/termios.h b/mdk-stage1/dietlibc/include/termios.h
deleted file mode 100644
index f10909c1b..000000000
--- a/mdk-stage1/dietlibc/include/termios.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef	_TERMIOS_H
-#define	_TERMIOS_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-/* man, the Linux kernel headers suck */
-#define __USE_BSD
-#include <linux/termios.h>
-#undef __USE_BSD
-
-pid_t tcgetpgrp(int fd) __THROW;
-int tcsetpgrp(int fd, pid_t pgrpid) __THROW;
-int tcgetattr(int fd, struct termios *termios_p) __THROW;
-int tcsetattr(int fd, int optional_actions, struct termios *termios_p) __THROW;
-speed_t cfgetospeed(struct termios *termios_p) __THROW;
-int cfsetospeed(struct termios *termios_p, speed_t speed) __THROW;
-speed_t cfgetispeed(struct termios *termios_p) __THROW;
-int cfsetispeed(struct termios *termios_p, speed_t speed) __THROW;
-int tcflush(int fd, int queue_selector) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/time.h b/mdk-stage1/dietlibc/include/time.h
deleted file mode 100644
index 827c85b97..000000000
--- a/mdk-stage1/dietlibc/include/time.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _TIME_H
-#define _TIME_H
-
-#include <sys/cdefs.h>
-#include <sys/time.h>
-
-extern int __isleap(int year);
-
-int nanosleep(const struct timespec *req, struct timespec *rem) __THROW;
-unsigned int sleep(unsigned int secs) __THROW;
-
-time_t mktime(struct tm *timeptr) __THROW __pure__;
-
-char *asctime(const struct tm *timeptr) __THROW;
-char *asctime_r(const struct tm *timeptr, char *buf) __THROW;
-
-char *ctime(const time_t *timep) __THROW;
-
-size_t strftime(char *s, size_t max, const char *format, const struct tm *tm) __THROW;
-time_t time(time_t *t) __THROW;
-
-int stime(time_t *t) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/unistd.h b/mdk-stage1/dietlibc/include/unistd.h
deleted file mode 100644
index 1a528c0e4..000000000
--- a/mdk-stage1/dietlibc/include/unistd.h
+++ /dev/null
@@ -1,168 +0,0 @@
-#ifndef _UNISTD_H
-#define _UNISTD_H
-
-#include <sys/cdefs.h>
-#include <dirent.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <getopt.h>
-#include <linux/sysctl.h>
-#include <sys/stat.h>
-
-/* Values for the second argument to access.
-   These may be OR'd together.  */
-#define R_OK 4 /* Test for read permission.  */
-#define W_OK 2 /* Test for write permission.  */
-#define X_OK 1 /* Test for execute permission.  */
-#define F_OK 0 /* Test for existence.  */
-
-/* Test for access to NAME using the real UID and real GID.  */
-extern int access (__const char *__name, int __type) __THROW;
-
-#define SEEK_SET 0
-#define SEEK_CUR 1
-#define SEEK_END 2
-
-#define STDIN_FILENO   0
-#define STDOUT_FILENO  1
-#define STDERR_FILENO  2
-
-off_t lseek(int fildes, off_t offset, int whence) __THROW;
-int llseek(int fildes, unsigned long hi, unsigned long lo, loff_t* result,int whence) __THROW;
-#ifndef __NO_STAT64
-loff_t lseek64(int fildes, loff_t offset, int whence) __THROW;
-#endif
-#if _FILE_OFFSET_BITS == 64
-#define lseek(fildes,offset,whence) lseek64(fildes,offset,whence)
-#endif
-
-int chdir(const char *path) __THROW;
-int fchdir(int fd) __THROW;
-int mkdir(const char *pathname, mode_t mode) __THROW;
-int rmdir(const char *pathname) __THROW;
-char *getcwd(char *buf, size_t size) __THROW;
-
-int open(const char* pathname,int flags, ...) __THROW;
-int open64(const char* pathname,int flags, ...) __THROW;
-int creat(const char* pathname,mode_t mode) __THROW;
-int creat64(const char* pathname,mode_t mode) __THROW;
-int write(int fd,const void* buf,size_t len) __THROW;
-int read(int fd,void* buf,size_t len) __THROW;
-int close(int fd) __THROW;
-
-int unlink(const char *pathname) __THROW;
-
-int pread(int fd, void *buf, size_t count, off_t offset);
-int pwrite(int fd, const void *buf, size_t count, off_t offset);
-
-int execve(const char *filename, char *const argv [], char *const envp[]) __THROW;
-int execlp(const char *file, const char *arg, ...) __THROW;
-int execv(const char *path, char *const argv[]) __THROW;
-int execvp(const char *file, char *const argv[]) __THROW;
-int execl(const char *path, ...) __THROW;
-
-pid_t getpid(void) __attribute__((__const__)) __THROW;
-pid_t getppid(void) __THROW;
-int kill(pid_t pid, int sig) __THROW;
-
-int setpgid (pid_t pid,pid_t pgid) __THROW;
-pid_t getpgid (pid_t pid) __THROW;
-int setpgrp (void) __THROW;
-pid_t getpgrp (void) __THROW;
-pid_t setsid (void) __THROW;
-int dup (int oldfd) __THROW;
-int dup2 (int oldfd,int newfd) __THROW;
-
-int mknod(const char *pathname, mode_t mode, dev_t dev) __THROW;
-
-int getdents(unsigned int fd, struct dirent *dirp, unsigned int count) __THROW;
-int getdents64(unsigned int fd, struct dirent64 *dirp, unsigned int count) __THROW;
-
-pid_t fork(void) __THROW;
-pid_t vfork(void) __THROW;
-
-int readlink(const char *path, char *buf, size_t bufsiz) __THROW;
-int symlink(const char *oldpath, const char *newpath) __THROW;
-int link(const char *oldpath, const char *newpath) __THROW;
-
-int chown(const char *path, uid_t owner, gid_t group) __THROW;
-int fchown(int fd, uid_t owner, gid_t group) __THROW;
-int lchown(const char *path, uid_t owner, gid_t group) __THROW;
-
-int fsync(int fd) __THROW;
-
-int pipe(int filedes[2]) __THROW;
-
-char *ttyname (int desc) __THROW;
-
-int brk(void *end_data_segment) __THROW;
-void *sbrk(ptrdiff_t increment) __THROW;
-
-int gethostname(char *name, size_t len) __THROW;
-int sethostname(const char *name, size_t len) __THROW;
-
-void usleep(unsigned long usec) __THROW;
-unsigned int sleep(unsigned int seconds) __THROW;
-
-unsigned int alarm(unsigned int seconds) __THROW;
-int sync(void) __THROW;
-
-int isatty(int desc) __THROW;
-
-void _exit(int status) __THROW __attribute__((noreturn));
-
-extern int daemon (int nochdir,int noclose) __THROW;
-
-#if _FILE_OFFSET_BITS == 64
-#define open open64
-#define creat creat64
-#endif
-
-extern char* getlogin(void) __THROW;
-/* warning: the diet libc getlogin() simply returns getenv("LOGNAME") */
-
-int chroot(const char *path) __THROW;
-
-uid_t getuid(void) __THROW;
-uid_t geteuid(void) __THROW;
-gid_t getgid(void) __THROW;
-gid_t getegid(void) __THROW;
-int setuid(uid_t uid) __THROW;
-/* int seteuid(uid_t uid) __THROW; */
-int setgid(gid_t gid) __THROW;
-/* int setegid(gid_t gid) __THROW; */
-int setregid(gid_t rgid, gid_t egid) __THROW;
-int setreuid(uid_t ruid, uid_t euid) __THROW;
-#define seteuid(euid) setreuid(-1,euid)
-#define setegid(egid) setregid(-1,egid)
-
-int rename(const char *oldpath, const char *newpath) __THROW;
-int ftruncate(int fd, off_t length) __THROW;
-
-int mkstemp(char *Template) __THROW;
-
-int select(int n, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout) __THROW;
-
-int nice(int inc) __THROW;
-
-extern char *__environ[];
-
-char *crypt(const char *key, const char *salt) __THROW;
-void encrypt(char block[64], int edflag) __THROW;
-void setkey(const char *key) __THROW;
-
-size_t getpagesize(void) __attribute__((__const__)) __THROW;
-
-int getdomainname(char *name, size_t len) __THROW;
-int setdomainname(const char *name, size_t len) __THROW;
-
-int getgroups(int size, gid_t list[]) __THROW;
-
-/* warning: linux specific: */
-int _sysctl(struct __sysctl_args *args) __THROW;
-int  sendfile(int out_fd, int in_fd, off_t *offset, size_t count) __THROW;
-
-int getdtablesize(void) __THROW;
-char *getpass(const char * prompt) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/utime.h b/mdk-stage1/dietlibc/include/utime.h
deleted file mode 100644
index 41674f379..000000000
--- a/mdk-stage1/dietlibc/include/utime.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _UTIME_H
-#define _UTIME_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <time.h>
-
-struct utimbuf {
-  time_t actime;  /* access time */
-  time_t modtime; /* modification time */
-};
-
-int utime(const char *filename, struct utimbuf *buf) __THROW;
-
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/utmp.h b/mdk-stage1/dietlibc/include/utmp.h
deleted file mode 100644
index 2946be921..000000000
--- a/mdk-stage1/dietlibc/include/utmp.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef _UTMP_H
-#define _UTMP_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <time.h>
-
-#define UT_LINESIZE	32
-#define UT_NAMESIZE	32
-#define UT_HOSTSIZE	256
-
-#define _PATH_UTMP	"/var/run/utmp"
-#define _PATH_WTMP	"/var/log/wtmp"
-
-/* The structure describing an entry in the database of
-   previous logins.  */
-struct lastlog
-  {
-    time_t ll_time;
-    char ll_line[UT_LINESIZE];
-    char ll_host[UT_HOSTSIZE];
-  };
-
-/* The structure describing the status of a terminated process.  This
-   type is used in `struct utmp' below.  */
-struct exit_status
-  {
-    short int e_termination;	/* Process termination status.  */
-    short int e_exit;		/* Process exit status.  */
-  };
-
-/* The structure describing an entry in the user accounting database.  */
-struct utmp
-{
-  short int ut_type;		/* Type of login.  */
-  pid_t ut_pid;			/* Process ID of login process.  */
-  char ut_line[UT_LINESIZE];	/* Devicename.  */
-  char ut_id[4];		/* Inittab ID.  */
-  char ut_user[UT_NAMESIZE];	/* Username.  */
-  char ut_host[UT_HOSTSIZE];	/* Hostname for remote login.  */
-#define ut_name ut_host
-  struct exit_status ut_exit;	/* Exit status of a process marked
-				   as DEAD_PROCESS.  */
-  long int ut_session;		/* Session ID, used for windowing.  */
-  struct timeval ut_tv;		/* Time entry was made.  */
-  int32_t ut_addr_v6[4];	/* Internet address of remote host.  */
-  char __unused[20];		/* Reserved for future use.  */
-};
-
-/* Values for the `ut_type' field of a `struct utmp'.  */
-#define EMPTY		0	/* No valid user accounting information.  */
-
-#define RUN_LVL		1	/* The system's runlevel.  */
-#define BOOT_TIME	2	/* Time of system boot.  */
-#define NEW_TIME	3	/* Time after system clock changed.  */
-#define OLD_TIME	4	/* Time when system clock changed.  */
-
-#define INIT_PROCESS	5	/* Process spawned by the init process.  */
-#define LOGIN_PROCESS	6	/* Session leader of a logged in user.  */
-#define USER_PROCESS	7	/* Normal process.  */
-#define DEAD_PROCESS	8	/* Terminated process.  */
-
-#define ACCOUNTING	9
-
-/* Tell the user that we have a modern system with UT_HOST, UT_PID,
-   UT_TYPE, UT_ID and UT_TV fields.  */
-#define _HAVE_UT_TYPE	1
-#define _HAVE_UT_PID	1
-#define _HAVE_UT_ID	1
-#define _HAVE_UT_TV	1
-#define _HAVE_UT_HOST	1
-
-#endif
diff --git a/mdk-stage1/dietlibc/lib/__dtostr.c b/mdk-stage1/dietlibc/lib/__dtostr.c
deleted file mode 100644
index e9a8a83d3..000000000
--- a/mdk-stage1/dietlibc/lib/__dtostr.c
+++ /dev/null
@@ -1,104 +0,0 @@
-#include <stdio.h>
-/* convert double to string.  Helper for sprintf. */
-
-int __dtostr(double d,char *buf,int maxlen,int prec) {
-  unsigned long long *x=(unsigned long long *)&d;
-  /* step 1: extract sign, mantissa and exponent */
-  signed int s=*x>>63;
-  signed long e=((*x>>52)&((1<<11)-1))-1023;
-/*  unsigned long long m=*x & ((1ull<<52)-1); */
-  /* step 2: exponent is base 2, compute exponent for base 10 */
-  signed long e10=1+(long)(e*0.30102999566398119802); /* log10(2) */
-  /* step 3: calculate 10^e10 */
-  int i;
-  double tmp=10.0;
-  char *oldbuf=buf;
-  int initial=1;
-
-  if (d==0.0) {
-    *buf='0'; ++buf;
-    goto done;
-  }
-  if (s) { d=-d; *buf='-'; --maxlen; buf++; }
-/*  printf("e=%d e10=%d prec=%d\n",e,e10,prec); */
-  if (e10>=0) {
-    i=e10;
-    while (i>10) { tmp=tmp*1e10; i-=10; }
-    while (i>1) { tmp=tmp*10; --i; }
-  } else {
-    i=(e10=-e10);
-    while (i>10) { tmp=tmp*1e-10; i-=10; }
-    while (i>1) { tmp=tmp/10; --i; }
-  }
-  while (d/tmp<1) {
-    --e10;
-    tmp/=10.0;
-  }
-  /* step 4: see if precision is sufficient to display all digits */
-  if (e10>prec) {
-    /* use scientific notation */
-    int len=__dtostr(d/tmp,buf,maxlen,prec);
-    if (len==0) return 0;
-    maxlen-=len; buf+=len;
-    if (--maxlen>=0) {
-      *buf='e';
-      ++buf;
-    }
-    for (len=1000; len>0; len/=10) {
-      if (e10>=len || !initial) {
-	if (--maxlen>=0) {
-	  *buf=(e10/len)+'0';
-	  ++buf;
-	}
-	initial=0;
-	e10=e10%len;
-      }
-    }
-    if (maxlen>=0) return buf-oldbuf;
-    return 0;
-  }
-  /* step 5: loop through the digits, inserting the decimal point when
-   * appropriate */
-  if (d<1.0) {
-    double x=1.0;
-    int first=1;
-    do {
-      if (--maxlen<0) return buf-oldbuf;
-      *buf='0'; ++buf;
-      if (first) {
-	first=0;
-	*buf='.'; ++buf;
-	if (--maxlen<0) return buf-oldbuf;
-      }
-      x/=10.0;
-    } while (x>d);
-  }
-  for (; prec>0; ) {
-    double tmp2=d/tmp;
-    char c;
-    d-=((int)tmp2*tmp);
-    c=((int)tmp2);
-    if ((!initial)||c) {
-      if (--maxlen>=0) {
-	initial=0;
-	*buf=c+'0';
-	++buf;
-      } else
-	return 0;
-      --prec;
-    }
-    if (tmp>0.5 && tmp<1.5) {
-      tmp=1e-1;
-      initial=0;
-      if (--maxlen>=0) {
-	*buf='.';
-	++buf;
-      } else
-	return 0;
-    } else
-      tmp/=10.0;
-  }
-done:
-  *buf=0;
-  return buf-oldbuf;
-}
diff --git a/mdk-stage1/dietlibc/lib/__fstat64.c b/mdk-stage1/dietlibc/lib/__fstat64.c
deleted file mode 100644
index 6f9fcb2c5..000000000
--- a/mdk-stage1/dietlibc/lib/__fstat64.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include "dietfeatures.h"
-
-#ifdef WANT_LARGEFILE_BACKCOMPAT
-#include <sys/stat.h>
-#ifndef __NO_STAT64
-#include <errno.h>
-
-extern int __dietlibc_fstat64(int __fd, struct stat64 *__buf);
-extern void __stat64_cvt(const struct stat *src,struct stat64 *dest);
-
-int fstat64(int __fd, struct stat64 *__buf) {
-  if (__dietlibc_fstat64(__fd,__buf)) {
-    struct stat temp;
-#ifdef WANT_THREAD_SAFE
-    if (*__errno_location()!=ENOSYS) return -1;
-#else
-    if (errno!=ENOSYS) return -1;
-#endif
-    if (fstat(__fd,&temp)) return -1;
-    __stat64_cvt(&temp,__buf);
-  }
-  return 0;
-}
-#endif
-#endif
diff --git a/mdk-stage1/dietlibc/lib/__getcwd.c b/mdk-stage1/dietlibc/lib/__getcwd.c
deleted file mode 100644
index e97fc4520..000000000
--- a/mdk-stage1/dietlibc/lib/__getcwd.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <stdlib.h>
-
-extern int __syscall_getcwd(char* buf, size_t size);
-
-char *getcwd(char *buf, size_t size) {
-  int tmp;
-  if ((tmp=__syscall_getcwd(buf,size))<0) return 0;
-  buf[tmp]=0;
-  return buf;
-}
diff --git a/mdk-stage1/dietlibc/lib/__isnan.c b/mdk-stage1/dietlibc/lib/__isnan.c
deleted file mode 100644
index 9d21e9824..000000000
--- a/mdk-stage1/dietlibc/lib/__isnan.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <stdio.h>
-
-int __isnan(double d) {
-  unsigned long long *x=(unsigned long long *)&d;
-  return (*x==0x7FF8002000000000ll || *x==0x7FF0002000000000);
-}
-
-#if 0
-TestFromIeeeExtended("7FFF0000000000000000");   /* +infinity */
-TestFromIeeeExtended("FFFF0000000000000000");   /* -infinity */
-TestFromIeeeExtended("7FFF8001000000000000");   /* Quiet NaN(1) */
-TestFromIeeeExtended("7FFF0001000000000000");   /* Signalling NaN(1) */
-TestFromIeeeExtended("3FFFFEDCBA9876543210");   /* accuracy test */
-#endif
diff --git a/mdk-stage1/dietlibc/lib/__lltostr.c b/mdk-stage1/dietlibc/lib/__lltostr.c
deleted file mode 100644
index eb4a27cef..000000000
--- a/mdk-stage1/dietlibc/lib/__lltostr.c
+++ /dev/null
@@ -1,31 +0,0 @@
-#include <string.h>
-
-int __lltostr(char *s, int size, unsigned long long i, int base, char UpCase)
-{
-  char *tmp;
-  int j=0;
-
-  s[--size]=0;
-
-  tmp=s+size;
-
-  if ((base==0)||(base>36)) base=10;
-
-  j=0;
-  if (!i)
-  {
-    *(--tmp)='0';
-    j=1;
-  }
-
-  while((tmp>s)&&(i))
-  {
-    tmp--;
-    if ((*tmp=i%base+'0')>'9') *tmp+=(UpCase?'A':'a')-'9'-1;
-    i=i/base;
-    j++;
-  }
-  memmove(s,tmp,j+1);
-
-  return j;
-}
diff --git a/mdk-stage1/dietlibc/lib/__lstat64.c b/mdk-stage1/dietlibc/lib/__lstat64.c
deleted file mode 100644
index a871f3917..000000000
--- a/mdk-stage1/dietlibc/lib/__lstat64.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include "dietfeatures.h"
-
-#ifdef WANT_LARGEFILE_BACKCOMPAT
-#include <sys/stat.h>
-#ifndef __NO_STAT64
-#include <errno.h>
-
-extern int __dietlibc_lstat64(const char *__file, struct stat64 *__buf);
-extern void __stat64_cvt(const struct stat *src,struct stat64 *dest);
-
-int lstat64(const char *__file, struct stat64 *__buf) {
-  if (__dietlibc_lstat64(__file,__buf)) {
-    struct stat temp;
-#ifdef WANT_THREAD_SAFE
-    if (*__errno_location()!=ENOSYS) return -1;
-#else
-    if (errno!=ENOSYS) return -1;
-#endif
-    if (lstat(__file,&temp)) return -1;
-    __stat64_cvt(&temp,__buf);
-  }
-  return 0;
-}
-#endif
-#endif
diff --git a/mdk-stage1/dietlibc/lib/__ltostr.c b/mdk-stage1/dietlibc/lib/__ltostr.c
deleted file mode 100644
index 57e0690d2..000000000
--- a/mdk-stage1/dietlibc/lib/__ltostr.c
+++ /dev/null
@@ -1,31 +0,0 @@
-#include <string.h>
-
-int __ltostr(char *s, int size, unsigned long i, int base, char UpCase)
-{
-  char *tmp;
-  int j=0;
-
-  s[--size]=0;
-
-  tmp=s+size;
-
-  if ((base==0)||(base>36)) base=10;
-
-  j=0;
-  if (!i)
-  {
-    *(--tmp)='0';
-    j=1;
-  }
-
-  while((tmp>s)&&(i))
-  {
-    tmp--;
-    if ((*tmp=i%base+'0')>'9') *tmp+=(UpCase?'A':'a')-'9'-1;
-    i=i/base;
-    j++;
-  }
-  memmove(s,tmp,j+1);
-
-  return j;
-}
diff --git a/mdk-stage1/dietlibc/lib/__stat64.c b/mdk-stage1/dietlibc/lib/__stat64.c
deleted file mode 100644
index dfb0d4315..000000000
--- a/mdk-stage1/dietlibc/lib/__stat64.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include "dietfeatures.h"
-
-#ifdef WANT_LARGEFILE_BACKCOMPAT
-#include <sys/stat.h>
-#ifndef __NO_STAT64
-#include <errno.h>
-
-extern int __dietlibc_stat64(const char *__file, struct stat64 *__buf);
-extern void __stat64_cvt(const struct stat *src,struct stat64 *dest);
-
-int stat64(const char *__file, struct stat64 *__buf) {
-  if (__dietlibc_stat64(__file,__buf)) {
-    struct stat temp;
-#ifdef WANT_THREAD_SAFE
-    if (*__errno_location()!=ENOSYS) return -1;
-#else
-    if (errno!=ENOSYS) return -1;
-#endif
-    if (stat(__file,&temp)) return -1;
-    __stat64_cvt(&temp,__buf);
-  }
-  return 0;
-}
-#endif
-#endif
diff --git a/mdk-stage1/dietlibc/lib/__stat64_cvt.c b/mdk-stage1/dietlibc/lib/__stat64_cvt.c
deleted file mode 100644
index dced352a4..000000000
--- a/mdk-stage1/dietlibc/lib/__stat64_cvt.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <sys/stat.h>
-#ifndef __NO_STAT64
-
-void __stat64_cvt(const struct stat *src,struct stat64 *dest) {
-  dest->st_dev=src->st_dev;
-  dest->st_ino=src->st_ino;
-  dest->st_mode=src->st_mode;
-  dest->st_nlink=src->st_nlink;
-  dest->st_uid=src->st_gid;
-  dest->st_rdev=src->st_rdev;
-  dest->st_size=src->st_size;
-  dest->st_blksize=src->st_blksize;
-  dest->st_blocks=src->st_blocks;
-  dest->st_atime=src->st_atime;
-  dest->st_mtime=src->st_mtime;
-  dest->st_ctime=src->st_ctime;
-}
-#endif
diff --git a/mdk-stage1/dietlibc/lib/__xmknod.c b/mdk-stage1/dietlibc/lib/__xmknod.c
deleted file mode 100644
index 4739a1f5f..000000000
--- a/mdk-stage1/dietlibc/lib/__xmknod.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <sys/stat.h>
-
-int __xmknod(int ver,char* filename,mode_t mode,dev_t *dev) {
-  return mknod(filename,mode,*dev);
-}
-
diff --git a/mdk-stage1/dietlibc/lib/_brk.c b/mdk-stage1/dietlibc/lib/_brk.c
deleted file mode 100644
index 6d0b29c03..000000000
--- a/mdk-stage1/dietlibc/lib/_brk.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <unistd.h>
-
-extern int __diet_brk(void *end_data_segment);
-
-void* __curbrk=0;
-
-int __brk(void *end_data_segment) {
-  int res;
-  if ((res=__diet_brk(end_data_segment))==0)
-    __curbrk=end_data_segment;
-  return res;
-}
-
-int brk (void *end_data_segment) __attribute__((weak,alias("__brk")));
diff --git a/mdk-stage1/dietlibc/lib/abort.c b/mdk-stage1/dietlibc/lib/abort.c
deleted file mode 100644
index 55bfb8f0f..000000000
--- a/mdk-stage1/dietlibc/lib/abort.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <linux/types.h>
-#include <linux/signal.h>
-#include <signal.h>
-#include <stdlib.h>
-
-void abort() {
-  sigset_t t;
-  if (!sigemptyset(&t) && !sigaddset(&t, SIGABRT))
-    sigprocmask(SIG_UNBLOCK, &t, 0);
-  while (1)
-    if (raise(SIGABRT))
-      exit(127);
-}
diff --git a/mdk-stage1/dietlibc/lib/abs.c b/mdk-stage1/dietlibc/lib/abs.c
deleted file mode 100644
index 9d7055358..000000000
--- a/mdk-stage1/dietlibc/lib/abs.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <stdlib.h>
-
-int abs(int j)
-{
-	return (j < 0) ? -j : j;
-}
diff --git a/mdk-stage1/dietlibc/lib/accept.c b/mdk-stage1/dietlibc/lib/accept.c
deleted file mode 100644
index c7e8254ca..000000000
--- a/mdk-stage1/dietlibc/lib/accept.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_accept(int a, void * addr, void * addr2) {
-#ifdef __i386__
-  return socketcall(SYS_ACCEPT, (long*)&a);
-#else
-  unsigned long args[] = { a, (long) addr, (long) addr2 };
-  return socketcall(SYS_ACCEPT, args);
-#endif
-}
-
-int accept(int a, void * addr, void * addr2) __attribute__((weak,alias("__libc_accept")));
diff --git a/mdk-stage1/dietlibc/lib/alarm.c b/mdk-stage1/dietlibc/lib/alarm.c
deleted file mode 100644
index fd35372f2..000000000
--- a/mdk-stage1/dietlibc/lib/alarm.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* Copyright (C) 1991, 1992, 1994, 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <unistd.h>
-#include <sys/time.h>
-
-/* Schedule an alarm.  In SECONDS seconds, the process will get a SIGALRM.
-   If SECONDS is zero, any currently scheduled alarm will be cancelled.
-   The function returns the number of seconds remaining until the last
-   alarm scheduled would have signaled, or zero if there wasn't one.
-   There is no return value to indicate an error, but you can set `errno'
-   to 0 and check its value after calling `alarm', and this might tell you.
-   The signal may come late due to processor scheduling.  */
-unsigned int
-alarm (seconds)
-     unsigned int seconds;
-{
-  struct itimerval old, new;
-  unsigned int retval;
-
-  new.it_interval.tv_usec = 0;
-  new.it_interval.tv_sec = 0;
-  new.it_value.tv_usec = 0;
-  new.it_value.tv_sec = (long int) seconds;
-  if (setitimer (ITIMER_REAL, &new, &old) < 0)
-    return 0;
-
-  retval = old.it_value.tv_sec;
-  if (old.it_value.tv_usec)
-    ++retval;
-  return retval;
-}
diff --git a/mdk-stage1/dietlibc/lib/alloc.c b/mdk-stage1/dietlibc/lib/alloc.c
deleted file mode 100644
index 8cb87a69b..000000000
--- a/mdk-stage1/dietlibc/lib/alloc.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * malloc/free by O.Dreesen
- */
-
-#include <linux/unistd.h>
-#include <asm/mman.h>
-#include <linux/errno.h>
-#include "dietfeatures.h"
-
-#if 0
-#include <sys/mman.h>
-#define _LIBC
-#include <errno.h>
-#endif
-
-#include <linux/types.h>
-
-#if defined(MAP_ANONYMOUS) && !defined(MAP_ANON)
-#define MAP_ANON MAP_ANONYMOUS
-#endif
-
-#ifndef MAP_FAILED
-#define MAP_FAILED ((void*)-1)
-#endif
-
-#ifndef NULL
-#define NULL ((void*)0)
-#endif
-
-extern void * mmap(void *start, size_t length, int prot , int flags, int fd, off_t offset);
-extern void *memset(void *s, int c, size_t n);
-extern void *memcpy(void *dest, const void *src, size_t n);
-
-typedef struct t_alloc_head {
-  unsigned int magic1;
-  struct t_alloc_head *ptr;
-  unsigned long size;
-  unsigned int magic2;
-} alloc_head;
-
-/* guess what ? the virtual block size */
-#define MEM_BLOCK_SIZE	4096
-
-/* minimum allocated bytes */
-#define MEM_ALLOC_MIN	4
-
-/* Initial start position in memory */
-#define MEM_ALLOC_START	((char*)0x18000000)
-
-/* Make every block align */
-#define MEM_ALIGN(s)	(((s)+MEM_ALLOC_MIN-1)&(~(MEM_ALLOC_MIN-1)))
-#define PAGE_ALIGN(s)	(((s)+MEM_BLOCK_SIZE-1)&(~(MEM_BLOCK_SIZE-1)))
-#define PAGE_ALIGNP(p)	((char*)PAGE_ALIGN((size_t)(p)))
-
-#define END_OF_BLOCK(p)	((alloc_head*)(((char*)(p))+((p)->size)))
-#define START_BLOCK(p)	((alloc_head*)(((char*)(p))-sizeof(alloc_head)))
-#define START_DATA(p)	(((char*)(p))+sizeof(alloc_head))
-#define MIN_ALLOC(s)	(((((s)+sizeof(alloc_head)-1)/MEM_ALLOC_MIN)+1)*MEM_ALLOC_MIN)
-
-#define ALLOC_MAGIC1	0xbad2f7ee
-#define ALLOC_MAGIC2	0xf7ee2bad
-
-/* freelist handler */
-static alloc_head base = {ALLOC_MAGIC1,&base,0,ALLOC_MAGIC2};
-static char *alloc_get_end = MEM_ALLOC_START;
-
-void __libc_free(void *ptr)
-{
-  alloc_head *prev,*p,*block;
-
-  if (ptr==NULL) return;
-
-  block=START_BLOCK(ptr);
-  if (block->magic1 != ALLOC_MAGIC1) return;
-  if (block->magic2 != ALLOC_MAGIC2) return;
-
-  prev=&base;
-  for (p=prev->ptr ; ; prev=p, p=p->ptr)
-  {
-    if ((block>prev)&&(block<p)) break; /* found the gap block belongs */
-    if ((prev>p)&&(block<p)) break;	  /* block pre freelist */
-    if ((prev>p)&&(block>prev)) break;  /* block after freelist */
-
-    /* emergency escape: freelist has ONLY one entry the freelist base */
-    if (p->ptr==p) break;
-  }
-  prev->ptr = block;
-
-  if (END_OF_BLOCK(block)==p)
-  { /* join right neighbor */
-    block->ptr   = p->ptr;
-    block->size += p->size;
-  }
-  else
-    block->ptr = p;
-
-  if (END_OF_BLOCK(prev)==block)
-  { /* join left neighbor */
-    prev->size += block->size;
-    prev->ptr   = block->ptr;
-  }
-}
-void free(void *ptr) __attribute__((weak,alias("__libc_free")));
-
-static void *alloc_get_mem(unsigned long size)
-{
-  char *tmp;
-  alloc_head *ah;
-
-  size=PAGE_ALIGN(size);
-
-  /* map free pages @ alloc_get_end */
-  tmp=mmap(alloc_get_end, size, PROT_READ|PROT_WRITE,
-	   MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
-  if (tmp==MAP_FAILED)
-  {
-    /* OK we can't map free pages @ alloc_get_end so try free position */
-    tmp=mmap(0, size, PROT_READ|PROT_WRITE,
-	     MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
-    if (tmp==MAP_FAILED)
-    {
-      errno = ENOMEM;
-      return NULL;	/* PANIC ! */
-    }
-    alloc_get_end=tmp;
-  }
-
-  alloc_get_end+=size;
-
-  /* make a header */
-  ah=(alloc_head*)tmp;
-  ah->magic1=ALLOC_MAGIC1;
-  ah->magic2=ALLOC_MAGIC2;
-  ah->ptr=ah;
-  ah->size=size;
-
-  /* link new free maped pages in freelist */
-  __libc_free(START_DATA(tmp));
-
-  return &base;
-}
-
-void *__libc_malloc(size_t size)
-{
-  alloc_head *p, *prev;
-  size_t need;
-
-  /* needed MEM_ALLOC_MIN */
-  need=MIN_ALLOC(size);
-
-  prev=&base;
-  for (p=prev->ptr;;prev=p,p=p->ptr)
-  {
-    if (p->size>=need)
-    {
-      if (p->size==need)
-      { /* fit PERFECT */
-	prev->ptr=p->ptr;	/* relink freelist */
-      }
-      else
-      {
-	alloc_head *tmp=(alloc_head*)(((char*)p)+need);
-	if ((p->size-need)<sizeof(alloc_head))
-	{ /* work around: if there is not enough space for freelist head.
-	   * this waste some bytes ( < sizeof(alloc_head) ) */
-	  need=p->size;
-	  prev->ptr=p->ptr;	/* relink freelist */
-	}
-	else
-	{
-	  prev->ptr=tmp;
-	  tmp->magic1=ALLOC_MAGIC1;
-	  tmp->magic2=ALLOC_MAGIC2;
-	  tmp->ptr=p->ptr;
-	  tmp->size=p->size-need;	/* remaining size */
-	}
-
-	p->size=need;	/* set size */
-      }
-      p->ptr=p;		/* self-link */
-
-      return (void*)START_DATA(p);
-    }
-    else if (p==&base)
-    {
-      if ((p=alloc_get_mem(need))==NULL) goto err_out;
-    }
-  }
-err_out:
-  return NULL;
-}
-void *malloc(size_t size) __attribute__((weak,alias("__libc_malloc")));
-
-void *calloc(size_t nmemb,size_t size)
-{
-  size_t n=nmemb*size;
-  void *tmp=malloc(n);
-  if (tmp) memset(tmp,0,n);
-  return tmp;
-}
-
-void *realloc(void *ptr,size_t size)
-{
-  alloc_head *tmp=0,*tf=0;
-  long need=0;
-  long diff=0;
-
-  if (ptr)
-  {
-    if (size)
-    {
-      tmp=START_BLOCK(ptr);
-      need=MIN_ALLOC(size);  /* only this size will survive */
-      diff=tmp->size-need;
-      if (diff<0)
-      {
-	if ((tf=malloc(size)))
-	{
-	  memcpy(tf,ptr,tmp->size-sizeof(alloc_head));
-	  free(ptr);
-	  return tf;
-	}
-	return NULL;
-      }
-      if (diff>=sizeof(alloc_head))
-      {
-	tmp->size=need;
-	tf=END_OF_BLOCK(tmp);
-	tf->magic1=ALLOC_MAGIC1;
-	tf->magic2=ALLOC_MAGIC2;
-	tf->ptr=tf;
-	tf->size=diff;
-	free(START_DATA(tf));
-      }
-      return ptr;
-    }
-    else
-      free(ptr);
-  }
-  else if (size>0)
-    return malloc(size);
-  return NULL;
-}
diff --git a/mdk-stage1/dietlibc/lib/assert_fail.c b/mdk-stage1/dietlibc/lib/assert_fail.c
deleted file mode 100644
index 3d6ba65c1..000000000
--- a/mdk-stage1/dietlibc/lib/assert_fail.c
+++ /dev/null
@@ -1,30 +0,0 @@
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include "dietwarning.h"
-
-extern int __ltostr(char *s, int size, unsigned long i, int base, char UpCase);
-
-void __assert_fail (const char *assertion, const char *file, unsigned int line, const char *function)
-{
-  int alen=strlen(assertion);
-  int flen=strlen(file);
-  int fulen=strlen(function);
-  char *buf=(char*)alloca(alen+flen+fulen+50);
-  if (buf) {
-    char *tmp;
-    *buf=0;
-    if (file) strcat(strcat(buf,file),":");
-    tmp=buf+strlen(buf);
-    __ltostr(tmp,10,line,10,0);
-    strcat(buf,": ");
-    if (function) strcat(strcat(buf,function),": ");
-    strcat(buf,"Assertion `");
-    strcat(buf,assertion);
-    strcat(buf,"' failed.\n");
-    write(2,buf,strlen(buf));
-  }
-  abort();
-}
-
-link_warning("__assert_fail","warning: your code still has assertions enabled!")
diff --git a/mdk-stage1/dietlibc/lib/atexit.c b/mdk-stage1/dietlibc/lib/atexit.c
deleted file mode 100644
index 8204af06c..000000000
--- a/mdk-stage1/dietlibc/lib/atexit.c
+++ /dev/null
@@ -1,23 +0,0 @@
-typedef void (*function)(void);
-
-static function __atexitlist[4];
-
-int atexit(function t) {
-  int i;
-  for (i=0; i<4; i++)
-    if (__atexitlist[i]==0) {
-      __atexitlist[i]=t;
-      return 0;
-    }
-  return -1;
-}
-
-extern void _exit(int code) __attribute__((noreturn));
-
-void exit(int code) {
-  if (__atexitlist[3]) __atexitlist[3]();
-  if (__atexitlist[2]) __atexitlist[2]();
-  if (__atexitlist[1]) __atexitlist[1]();
-  if (__atexitlist[0]) __atexitlist[0]();
-  _exit(code);
-}
diff --git a/mdk-stage1/dietlibc/lib/atof.c b/mdk-stage1/dietlibc/lib/atof.c
deleted file mode 100644
index 54221390e..000000000
--- a/mdk-stage1/dietlibc/lib/atof.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <stdlib.h>
-
-double atof(const char *nptr) {
-#if 0
-  return strtod(nptr,0);
-#else
-  double tmp=strtod(nptr,0);
-  return tmp;
-#endif
-}
diff --git a/mdk-stage1/dietlibc/lib/atoi.c b/mdk-stage1/dietlibc/lib/atoi.c
deleted file mode 100644
index fe952b8c4..000000000
--- a/mdk-stage1/dietlibc/lib/atoi.c
+++ /dev/null
@@ -1,8 +0,0 @@
-int atoi(const char* s) {
-  int v=0;
-  int sign=1;
-  if (*s=='-') { sign=-1; ++s; } else if (*s=='+') ++s;
-  while (*s && (*s>='0') && (*s<='9'))
-    v=v*10+*s++-'0';
-  return v*sign;
-}
diff --git a/mdk-stage1/dietlibc/lib/atol.c b/mdk-stage1/dietlibc/lib/atol.c
deleted file mode 100644
index 558a004b9..000000000
--- a/mdk-stage1/dietlibc/lib/atol.c
+++ /dev/null
@@ -1,8 +0,0 @@
-long int atol(const char* s) {
-  long int v=0;
-  int sign=1;
-  if (*s=='-') { sign=-1; ++s; } else if (*s=='+') ++s;
-  while (*s && (*s>='0') && (*s<='9'))
-    v=v*10+*s++-'0';
-  return v*sign;
-}
diff --git a/mdk-stage1/dietlibc/lib/bind.c b/mdk-stage1/dietlibc/lib/bind.c
deleted file mode 100644
index ec1c93e1b..000000000
--- a/mdk-stage1/dietlibc/lib/bind.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int bind(int a, void * b, int c) {
-#ifdef __i386__
-  return socketcall(SYS_BIND, (long*)&a);
-#else
-  unsigned long args[] = { a, (long) b, c };
-  return socketcall(SYS_BIND, args);
-#endif
-}
diff --git a/mdk-stage1/dietlibc/lib/bsearch.c b/mdk-stage1/dietlibc/lib/bsearch.c
deleted file mode 100644
index d2f5c74b2..000000000
--- a/mdk-stage1/dietlibc/lib/bsearch.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <stdlib.h>
-
-void *bsearch(const void *key, const void *base, size_t nmemb, size_t size, int (*compar)(const void *, const void *)) {
-  const char *v, *r;
-  int res;
-  r=base+(nmemb-1)*size;
-  do {
-    register int num=nmemb/2;
-    v=base+num*size;
-    if ((res=compar(key,v))<0) {
-      r=v-size;
-      nmemb=num;
-    } else {
-      if (res==0) return (void*)v;
-      base=v+size;
-      nmemb-=num;
-    }
-  } while ((char*)base<=r);
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/cfmakeraw.c b/mdk-stage1/dietlibc/lib/cfmakeraw.c
deleted file mode 100644
index 7f6df9913..000000000
--- a/mdk-stage1/dietlibc/lib/cfmakeraw.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <termios.h>
-#include <sys/ioctl.h>
-
-void cfmakeraw(struct termios *t)
-{
-     t->c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP|INLCR|IGNCR|ICRNL|IXON);
-     t->c_oflag &= ~OPOST;
-     t->c_lflag &= ~(ECHO|ECHONL|ICANON|ISIG|IEXTEN);
-     t->c_cflag &= ~(CSIZE|PARENB);
-     t->c_cflag |= CS8;
-     t->c_cc[VMIN] = 1;
-     t->c_cc[VTIME] = 0;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/closedir.c b/mdk-stage1/dietlibc/lib/closedir.c
deleted file mode 100644
index e73025eb1..000000000
--- a/mdk-stage1/dietlibc/lib/closedir.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include "dietdirent.h"
-#include <unistd.h>
-#include <dirent.h>
-#include <stdlib.h>
-
-int closedir (DIR* d) {
-  int res=close(d->fd);
-  free(d);
-  return res;
-}
diff --git a/mdk-stage1/dietlibc/lib/connect.c b/mdk-stage1/dietlibc/lib/connect.c
deleted file mode 100644
index 01fd61a6c..000000000
--- a/mdk-stage1/dietlibc/lib/connect.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_connect(int a, void * b, int c) {
-#ifdef __i386__
-  return socketcall(SYS_CONNECT, (long*)&a);
-#else
-  unsigned long args[] = { a, (long) b, c };
-  return socketcall(SYS_CONNECT, args);
-#endif
-}
-
-int connect(int a, void * b, int c) __attribute__((weak,alias("__libc_connect")));
diff --git a/mdk-stage1/dietlibc/lib/creat.c b/mdk-stage1/dietlibc/lib/creat.c
deleted file mode 100644
index 82145b515..000000000
--- a/mdk-stage1/dietlibc/lib/creat.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <fcntl.h>
-
-int creat(const char *file,mode_t mode) {
-  return open(file,O_WRONLY|O_CREAT|O_TRUNC,mode);
-}
diff --git a/mdk-stage1/dietlibc/lib/creat64.c b/mdk-stage1/dietlibc/lib/creat64.c
deleted file mode 100644
index 8cf897b57..000000000
--- a/mdk-stage1/dietlibc/lib/creat64.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <fcntl.h>
-
-#ifndef O_LARGEFILE
-#define O_LARGEFILE 0
-#endif
-
-int creat64(const char *file,mode_t mode) {
-  return open(file,O_WRONLY|O_CREAT|O_TRUNC|O_LARGEFILE,mode);
-}
diff --git a/mdk-stage1/dietlibc/lib/errlist.c b/mdk-stage1/dietlibc/lib/errlist.c
deleted file mode 100644
index d0e712190..000000000
--- a/mdk-stage1/dietlibc/lib/errlist.c
+++ /dev/null
@@ -1,132 +0,0 @@
-
-const char *const sys_errlist[] = {
-	"Success",				/* 0 */
-	"Operation not permitted", 		/* EPERM */
-	"No such file or directory", 		/* ENOENT */
-	"No such process", 			/* ESRCH */
-	"Interrupted system call", 		/* EINTR */
-	"I/O error", 				/* EIO */
-	"No such device or address", 		/* ENXIO */
-	"Arg list too long", 			/* E2BIG */
-	"Exec format error", 			/* ENOEXEC */
-	"Bad file number", 			/* EBADF */
-	"No child processes", 			/* ECHILD */
-	"Try again", 				/* EAGAIN */
-	"Out of memory", 			/* ENOMEM */
-	"Permission denied", 			/* EACCES */
-	"Bad address", 				/* EFAULT */
-	"Block device required", 		/* ENOTBLK */
-	"Device or resource busy", 		/* EBUSY */
-	"File exists", 				/* EEXIST */
-	"Cross-device link", 			/* EXDEV */
-	"No such device", 			/* ENODEV */
-	"Not a directory", 			/* ENOTDIR */
-	"Is a directory", 			/* EISDIR */
-	"Invalid argument", 			/* EINVAL */
-	"File table overflow", 			/* ENFILE */
-	"Too many open files", 			/* EMFILE */
-	"Not a typewriter", 			/* ENOTTY */
-	"Text file busy", 			/* ETXTBSY */
-	"File too large", 			/* EFBIG */
-	"No space left on device", 		/* ENOSPC */
-	"Illegal seek", 			/* ESPIPE */
-	"Read-only file system", 		/* EROFS */
-	"Too many links", 			/* EMLINK */
-	"Broken pipe", 				/* EPIPE */
-	"Math argument out of domain of func", 	/* EDOM */
-	"Math result not representable", 	/* ERANGE */
-	"Resource deadlock would occur", 	/* EDEADLK */
-	"File name too long", 			/* ENAMETOOLONG */
-	"No record locks available", 		/* ENOLCK */
-	"Function not implemented", 		/* ENOSYS */
-	"Directory not empty", 			/* ENOTEMPTY */
-	"Too many symbolic links encountered", 	/* ELOOP */
-	"Operation would block", 		/* EWOULDBLOCK */
-	"No message of desired type", 		/* ENOMSG */
-	"Identifier removed", 			/* EIDRM */
-	"Channel number out of range", 		/* ECHRNG */
-	"Level 2 not synchronized", 		/* EL2NSYNC */
-	"Level 3 halted", 			/* EL3HLT */
-	"Level 3 reset", 			/* EL3RST */
-	"Link number out of range", 		/* ELNRNG */
-	"Protocol driver not attached", 	/* EUNATCH */
-	"No CSI structure available", 		/* ENOCSI */
-	"Level 2 halted", 			/* EL2HLT */
-	"Invalid exchange", 			/* EBADE */
-	"Invalid request descriptor", 		/* EBADR */
-	"Exchange full", 			/* EXFULL */
-	"No anode", 				/* ENOANO */
-	"Invalid request code", 		/* EBADRQC */
-	"Invalid slot", 			/* EBADSLT */
-	"File locking deadlock error", 		/* EDEADLOCK */
-	"Bad font file format", 		/* EBFONT */
-	"Device not a stream", 			/* ENOSTR */
-	"No data available", 			/* ENODATA */
-	"Timer expired", 			/* ETIME */
-	"Out of streams resources", 		/* ENOSR */
-	"Machine is not on the network", 	/* ENONET */
-	"Package not installed", 		/* ENOPKG */
-	"Object is remote", 			/* EREMOTE */
-	"Link has been severed", 		/* ENOLINK */
-	"Advertise error", 			/* EADV */
-	"Srmount error", 			/* ESRMNT */
-	"Communication error on send", 		/* ECOMM */
-	"Protocol error", 			/* EPROTO */
-	"Multihop attempted", 			/* EMULTIHOP */
-	"RFS specific error", 			/* EDOTDOT */
-	"Not a data message", 			/* EBADMSG */
-	"Value too large for defined data type", 	/* EOVERFLOW */
-	"Name not unique on network", 		/* ENOTUNIQ */
-	"File descriptor in bad state", 	/* EBADFD */
-	"Remote address changed", 		/* EREMCHG */
-	"Can not access a needed shared library", 	/* ELIBACC */
-	"Accessing a corrupted shared library", 	/* ELIBBAD */
-	".lib section in a.out corrupted", 	/* ELIBSCN */
-	"Attempting to link in too many shared libraries", 	/* ELIBMAX */
-	"Cannot exec a shared library directly", 	/* ELIBEXEC */
-	"Illegal byte sequence", 		/* EILSEQ */
-	"Interrupted system call should be restarted", 	/* ERESTART */
-	"Streams pipe error", 			/* ESTRPIPE */
-	"Too many users", 			/* EUSERS */
-	"Socket operation on non-socket", 	/* ENOTSOCK */
-	"Destination address required", 	/* EDESTADDRREQ */
-	"Message too long", 			/* EMSGSIZE */
-	"Protocol wrong type for socket", 	/* EPROTOTYPE */
-	"Protocol not available", 		/* ENOPROTOOPT */
-	"Protocol not supported", 		/* EPROTONOSUPPORT */
-	"Socket type not supported", 		/* ESOCKTNOSUPPORT */
-	"Operation not supported on transport endpoint", 	/* EOPNOTSUPP */
-	"Protocol family not supported", 	/* EPFNOSUPPORT */
-	"Address family not supported by protocol", 	/* EAFNOSUPPORT */
-	"Address already in use", 		/* EADDRINUSE */
-	"Cannot assign requested address", 	/* EADDRNOTAVAIL */
-	"Network is down", 			/* ENETDOWN */
-	"Network is unreachable", 		/* ENETUNREACH */
-	"Network dropped connection because of reset", 	/* ENETRESET */
-	"Software caused connection abort", 	/* ECONNABORTED */
-	"Connection reset by peer", 		/* ECONNRESET */
-	"No buffer space available", 		/* ENOBUFS */
-	"Transport endpoint is already connected", 	/* EISCONN */
-	"Transport endpoint is not connected", 	/* ENOTCONN */
-	"Cannot send after transport endpoint shutdown", 	/* ESHUTDOWN */
-	"Too many references: cannot splice", 	/* ETOOMANYREFS */
-	"Connection timed out", 		/* ETIMEDOUT */
-	"Connection refused", 			/* ECONNREFUSED */
-	"Host is down", 			/* EHOSTDOWN */
-	"No route to host", 			/* EHOSTUNREACH */
-	"Operation already in progress", 	/* EALREADY */
-	"Operation now in progress", 		/* EINPROGRESS */
-	"Stale NFS file handle", 		/* ESTALE */
-	"Structure needs cleaning", 		/* EUCLEAN */
-	"Not a XENIX named type file", 		/* ENOTNAM */
-	"No XENIX semaphores available", 	/* ENAVAIL */
-	"Is a named type file", 		/* EISNAM */
-	"Remote I/O error", 			/* EREMOTEIO */
-	"Quota exceeded", 			/* EDQUOT */
-	"No medium found",			/* ENOMEDIUM */
-	"Wrong medium type",			/* EMEDIUMTYPE */
-	0
-};
-
-
-const int sys_nerr = ((sizeof (sys_errlist))/(sizeof(char *))-1);
diff --git a/mdk-stage1/dietlibc/lib/errno_location.c b/mdk-stage1/dietlibc/lib/errno_location.c
deleted file mode 100644
index 286f833c9..000000000
--- a/mdk-stage1/dietlibc/lib/errno_location.c
+++ /dev/null
@@ -1,5 +0,0 @@
-extern int errno;
-
-int *__errno_location() { return &errno; }
-
-int *errno_location() __attribute__((weak,alias("__errno_location")));
diff --git a/mdk-stage1/dietlibc/lib/exec_lib.c b/mdk-stage1/dietlibc/lib/exec_lib.c
deleted file mode 100644
index 3129224a0..000000000
--- a/mdk-stage1/dietlibc/lib/exec_lib.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <unistd.h>
-#include <paths.h>
-
-extern char **environ;
-
-int __exec_shell(const char *file, char *const argv[]) {
-  int i;
-
-  for (i = 0; argv[i]; i++);
-
-  {
-    char *shell_argv[i + 1];
-    shell_argv[0] = _PATH_BSHELL;
-    shell_argv[1] = (char *) file;
-    for (; i > 1; i--)
-      shell_argv[i] = argv[i - 1];
-    return execve(_PATH_BSHELL, shell_argv, environ);
-  }
-}
-
diff --git a/mdk-stage1/dietlibc/lib/exec_lib.h b/mdk-stage1/dietlibc/lib/exec_lib.h
deleted file mode 100644
index 0971bd1fb..000000000
--- a/mdk-stage1/dietlibc/lib/exec_lib.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __EXEC_LIB_H
-#define __EXEC_LIB_H
-
-#include <paths.h>
-
-extern int __exec_shell(const char *file, char *const argv[]);
-
-#endif /* __EXEC_LIB_H */
-
diff --git a/mdk-stage1/dietlibc/lib/execl.c b/mdk-stage1/dietlibc/lib/execl.c
deleted file mode 100644
index 71459e71f..000000000
--- a/mdk-stage1/dietlibc/lib/execl.c
+++ /dev/null
@@ -1,24 +0,0 @@
-#include <stdarg.h>
-#include <unistd.h>
-#include <errno.h>
-#include <stdlib.h>
-
-int execl( const char *path,...) {
-  va_list ap;
-  int n,i;
-  char **argv,*tmp;
-  va_start(ap, path);
-  n=1;
-  while ((tmp=va_arg(ap,char *)))
-    ++n;
-  va_end (ap);
-  if ((argv=(char **)alloca(n*sizeof(char*)))) {
-    va_start(ap, path);
-    for (i=0; i<n; ++i)
-      argv[i]=va_arg(ap,char *);
-    va_end (ap);
-    return execve(path,argv,environ);
-  }
-  __set_errno(ENOMEM);
-  return -1;
-}
diff --git a/mdk-stage1/dietlibc/lib/execlp.c b/mdk-stage1/dietlibc/lib/execlp.c
deleted file mode 100644
index 3aea1e960..000000000
--- a/mdk-stage1/dietlibc/lib/execlp.c
+++ /dev/null
@@ -1,26 +0,0 @@
-#include <stdarg.h>
-#include <unistd.h>
-#include <errno.h>
-#include <stdlib.h>
-#include "dietstdarg.h"
-
-int execlp(const char* file, const char *arg,...) {
-  va_list ap,bak;
-  int n,i;
-  char **argv,*tmp;
-  va_start(ap, arg);
-  va_copy(bak,ap);
-  n=2;
-  while ((tmp=va_arg(ap,char *)))
-    ++n;
-  va_end (ap);
-  if ((argv=(char **)alloca(n*sizeof(char*)))) {
-    argv[0]=arg;
-    for (i=0; i<n; ++i)
-      argv[i+1]=va_arg(bak,char *);
-    va_end (bak);
-    return execvp(file,argv);
-  }
-  __set_errno(ENOMEM);
-  return -1;
-}
diff --git a/mdk-stage1/dietlibc/lib/execv.c b/mdk-stage1/dietlibc/lib/execv.c
deleted file mode 100644
index efd760253..000000000
--- a/mdk-stage1/dietlibc/lib/execv.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <limits.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-#include "exec_lib.h"
-
-int execv(const char *file, char *const argv[]) {
-  if (execve(file,argv,environ)==-1) {
-    if (errno==ENOEXEC) __exec_shell(file,argv);
-  }
-  return -1;
-}
diff --git a/mdk-stage1/dietlibc/lib/execvp.c b/mdk-stage1/dietlibc/lib/execvp.c
deleted file mode 100644
index 20521d69f..000000000
--- a/mdk-stage1/dietlibc/lib/execvp.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include <limits.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-#include "exec_lib.h"
-
-int execvp(const char *file, char *const argv[]) {
-  char *path=getenv("PATH");
-  char *cur,*next;
-  char buf[PATH_MAX];
-  if (strchr((char*)file,'/')) {
-    if (execve(file,argv,environ)==-1) {
-      if (errno==ENOEXEC) __exec_shell(file,argv);
-      return -1;
-    }
-  }
-  if (!path) path=_PATH_DEFPATH;
-  for (cur=path; cur; cur=next) {
-    next=strchr(cur,':');
-    if (!next)
-      next=cur+strlen(cur);
-    if (next==cur) {
-      buf[0]='.';
-      cur--;
-    } else
-      memmove(buf,cur,next-cur);
-    buf[next-cur]='/';
-    memmove(&buf[next-cur+1],file,strlen(file)+1);
-    if (execve(buf,argv,environ)==-1) {
-      if (errno==ENOEXEC) return __exec_shell(buf,argv);
-      if ((errno!=EACCES) && (errno!=ENOENT)) return -1;
-    }
-    if (*next==0) break;
-    next++;
-  }
-  return -1;
-}
diff --git a/mdk-stage1/dietlibc/lib/ftw.c b/mdk-stage1/dietlibc/lib/ftw.c
deleted file mode 100644
index a3c04af9a..000000000
--- a/mdk-stage1/dietlibc/lib/ftw.c
+++ /dev/null
@@ -1,52 +0,0 @@
-#include <linux/stat.h>
-#include <unistd.h>
-#include <limits.h>
-#include <ftw.h>
-#include <dirent.h>
-#include <string.h>
-#include <stdlib.h>
-
-int ftw(const char *dir,int (*fn)(const char *file, const struct stat *sb, int flag), int depth) {
-  char *cwd;
-  int cwdlen;
-  DIR *d;
-  struct dirent *de;
-  struct stat sb;
-  if (chdir(dir)) return -1;
-  cwd=alloca(PATH_MAX+1);
-  if (!getcwd(cwd,PATH_MAX)) return -1;
-  cwd[PATH_MAX]=0;
-  cwdlen=strlen(cwd);
-/*  write(1,"ftw in ",7); puts(cwd); */
-  if (!(d=opendir("."))) return -1;
-  while ((de=readdir(d))) {
-    int res;
-    int flag;
-    int nlen;
-    char *filename;
-    if (de->d_name[0]=='.' &&
-	(de->d_name[1]==0 ||
-	(de->d_name[1]=='.' && de->d_name[2]==0))) continue;
-    nlen=strlen(de->d_name);
-    filename=alloca(nlen+cwdlen+3);
-    memmove(filename,cwd,cwdlen);
-    filename[cwdlen]='/';
-    memmove(filename+cwdlen+1,de->d_name,nlen+1);
-    if (!lstat(de->d_name,&sb)) {
-      if (S_ISLNK(sb.st_mode)) flag=FTW_SL; else
-      if (S_ISDIR(sb.st_mode)) flag=FTW_D; else
-      flag=FTW_F;
-    } else
-      flag=FTW_NS;
-    res=fn(filename,&sb,flag);
-    if (res) return res;
-    if (flag==FTW_D && depth>0) {
-      res=ftw(filename,fn,depth-1);
-      chdir(dir);
-      if (res) return res;
-    }
-/*    puts(de->d_name); */
-  }
-  closedir(d);
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/getdomainname.c b/mdk-stage1/dietlibc/lib/getdomainname.c
deleted file mode 100644
index 2554fe4c3..000000000
--- a/mdk-stage1/dietlibc/lib/getdomainname.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#define _GNU_SOURCE
-
-#include <sys/types.h>
-#include <sys/utsname.h>
-
-int getdomainname(char *name,size_t len) {
-  struct utsname u;
-  int res=uname(&u);
-  if (res==0) {
-    int i;
-    if (len>=_UTSNAME_DOMAIN_LENGTH)
-      len=_UTSNAME_DOMAIN_LENGTH;
-    for (i=0; i<len; i++)
-      name[i]=u.domainname[i];
-  }
-  return res;
-}
diff --git a/mdk-stage1/dietlibc/lib/getenv.c b/mdk-stage1/dietlibc/lib/getenv.c
deleted file mode 100644
index fc37e9927..000000000
--- a/mdk-stage1/dietlibc/lib/getenv.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <string.h>
-
-extern char **environ;
-
-extern char *getenv(const char *s)
-{
-  int i;
-  unsigned int len;
-
-  if (!environ || !s) return 0;
-  len = strlen(s);
-  for (i = 0;environ[i];++i)
-    if ((memcmp(environ[i],s,len)==0) && (environ[i][len] == '='))
-      return environ[i] + len + 1;
-  return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/gethostname.c b/mdk-stage1/dietlibc/lib/gethostname.c
deleted file mode 100644
index ccc0fbc8e..000000000
--- a/mdk-stage1/dietlibc/lib/gethostname.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#define _GNU_SOURCE
-
-#include <sys/types.h>
-#include <sys/utsname.h>
-
-int gethostname(char *name,size_t len) {
-  struct utsname u;
-  int res=uname(&u);
-  if (res==0) {
-    int i;
-    if (len>=_UTSNAME_NODENAME_LENGTH)
-      len=_UTSNAME_NODENAME_LENGTH;
-    for (i=0; i<len; i++)
-      name[i]=u.nodename[i];
-  }
-  return res;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/getopt.c b/mdk-stage1/dietlibc/lib/getopt.c
deleted file mode 100644
index 93097122f..000000000
--- a/mdk-stage1/dietlibc/lib/getopt.c
+++ /dev/null
@@ -1,118 +0,0 @@
-#include "getopt.h"
-#include <string.h>
-
-/*
- * by Olaf Dreesen
- */
-
-int opterr;
-
-int optind=1;
-char *optarg;
-
-static int opt_unknown=1,opt_unknown_len;
-
-static int getopt_check(int c,char*o,int ol)
-{
-  int i;
-  if (c==':') return 2;
-  for (i=0;i<ol;i++)
-  {
-    if (o[i]==c)
-    {
-      if (o[i+1]==':') return 1;
-      return 0;
-    }
-  }
-  return 2;
-}
-
-static void getopt_sort(char*v[],int oi)
-{
-  int i;
-  char *tmp, *tmp2=0;
-
-  if (opt_unknown_len)
-  {
-    tmp=v[optind-(1+oi)];
-    if (oi) tmp2=v[optind-1];
-
-    for (i=opt_unknown+opt_unknown_len;i>opt_unknown;i--) v[i+oi]=v[i-1];
-
-    v[opt_unknown++]=tmp;
-    if (oi) v[opt_unknown++]=tmp2;
-  }
-}
-
-static char* nextchar;
-int getopt(int c,char*v[],char*o)
-{
-  int ol=strlen(o);
-  int ret=0;
-  int oi=0;
-
-  optarg=0;
-
-  while (nextchar || (optind<c))
-  {
-    if (nextchar)
-    {
-      if ((ret=(*(++nextchar))))
-      {
-	switch (getopt_check(ret,o,ol))
-	{
-	case 1:
-	  if (*(++nextchar))
-	    optarg=nextchar;
-	  else
-	  {
-	    if (optind<c)
-	    {
-	      oi=1;
-	      optarg=v[optind++];
-	    }
-	    else
-	      ret='?';
-	  }
-	  nextchar=0;
-	case 0:
-	  if (!nextchar)
-	    getopt_sort(v,oi);
-	  else
-	    if (!(*(nextchar+1)))
-	      getopt_sort(v,oi);
-	  return ret;
-	  break;
-	default:
-	  return '?';
-	  break;
-	}
-      }
-      else
-	nextchar=0;
-    }
-    else
-    {
-      if ((v[optind][0]=='-')&&((v[optind][1]!=0)))
-      {
-	if ((v[optind][1]=='-')&&(v[optind][2]==0))
-	{
-	  getopt_sort(v,oi);
-	  optind=opt_unknown;
-	  return -1;
-	}
-	else
-	{
-	  nextchar=v[optind];
-	}
-      }
-      else
-      {
-	++opt_unknown_len;
-      }
-      ++optind;
-    }
-  }
-  optind=opt_unknown;
-  return -1;
-}
diff --git a/mdk-stage1/dietlibc/lib/getpeername.c b/mdk-stage1/dietlibc/lib/getpeername.c
deleted file mode 100644
index 8adcddf55..000000000
--- a/mdk-stage1/dietlibc/lib/getpeername.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int getpeername(int a, void * b, int c) {
-#ifdef __i386__
-  return socketcall(SYS_GETPEERNAME, (long*)&a);
-#else
-  unsigned long args[] = { a, (long) b, c };
-  return socketcall(SYS_GETPEERNAME, args);
-#endif
-}
-
diff --git a/mdk-stage1/dietlibc/lib/getpgrp.c b/mdk-stage1/dietlibc/lib/getpgrp.c
deleted file mode 100644
index ee2ab0257..000000000
--- a/mdk-stage1/dietlibc/lib/getpgrp.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <unistd.h>
-
-int getpgrp()
-{
-  return getpgid(0);
-}
diff --git a/mdk-stage1/dietlibc/lib/getservent.c b/mdk-stage1/dietlibc/lib/getservent.c
deleted file mode 100644
index bf25d046b..000000000
--- a/mdk-stage1/dietlibc/lib/getservent.c
+++ /dev/null
@@ -1,137 +0,0 @@
-#include <unistd.h>
-#include <fcntl.h>
-#include <netdb.h>
-#include <sys/mman.h>
-#include <errno.h>
-#include <netinet/in.h>
-#include <string.h>
-#include <ctype.h>
-
-static int servicesfd=-1;
-static char* servicesmap;
-static unsigned int serviceslen;
-
-static char* aliases[10];
-
-static char *cur;
-
-/* nameserver	42/tcp		name		# IEN 116 */
-struct servent *getservent(void) {
-  static struct servent se;
-  char *last;
-  int aliasidx;
-  if (servicesfd<0) {
-    servicesfd=open(_PATH_SERVICES,O_RDONLY);
-    if (servicesfd<0) return 0;
-    serviceslen=lseek(servicesfd,0,SEEK_END);
-    servicesmap=mmap(0,serviceslen,PROT_READ|PROT_WRITE,MAP_PRIVATE,servicesfd,0);
-    if ((long)servicesmap==(-1)) goto error;
-    cur=servicesmap;
-  }
-  last=servicesmap+serviceslen;
-again:
-  se.s_name=0;
-  se.s_aliases=aliases; aliases[0]=0;
-  se.s_port=0;
-  se.s_proto=0;
-  if (cur>=last) return 0;
-  if (*cur=='#' || *cur=='\n') goto parseerror;
-  /* first, the primary name */
-  if (!isalpha(*cur)) goto parseerror;
-  se.s_name=cur;
-  se.s_aliases=aliases;
-  while (cur<last && isalnum(*cur)) cur++;
-  if (cur>=last) return 0;
-  if (*cur=='\n') goto parseerror;
-  *cur=0; cur++;
-  /* second, the port */
-  while (cur<last && isblank(*cur)) cur++;
-  while (cur<last && isdigit(*cur)) {
-    se.s_port=se.s_port*10+*cur-'0';
-    cur++;
-  }
-  se.s_port=htons(se.s_port);
-  if (cur>=last) return 0;
-  /* third, "/tcp" or "/udp" */
-  if (*cur!='/') goto parseerror;
-  cur++;
-  se.s_proto=cur;
-  while (cur<last && isalpha(*cur)) ++cur;
-  if (cur>=last) return 0;
-  if (*cur=='\n') { *cur++=0; return &se; }
-  *cur=0; cur++;
-  /* now the aliases */
-  for (aliasidx=0;aliasidx<10;++aliasidx) {
-    while (cur<last && isblank(*cur)) ++cur;
-    aliases[aliasidx]=cur;
-    while (cur<last && isalpha(*cur)) ++cur;
-    if (*cur=='\n') { *cur++=0; ++aliasidx; break; }
-    if (cur>=last || !isblank(*cur)) break;
-    *cur++=0;
-  }
-  aliases[aliasidx]=0;
-  return &se;
-parseerror:
-  while (cur<last && *cur!='\n') cur++;
-  cur++;
-  goto again;
-error:
-  if (servicesmap!=(char*)-1) munmap(servicesmap,serviceslen);
-  if (servicesfd!=-1) close(servicesfd);
-  servicesmap=(char*)-1;
-  servicesfd=-1;
-  errno=ENOMEM;
-  return 0;
-}
-
-void setservent(int stayopen) {
-  cur=servicesmap;
-}
-
-struct servent *getservbyname(const char *name, const char *proto) {
-  struct servent *s;
-  setservent(0);
-  for (s=getservent(); s; s=getservent()) {
-    char **tmp;
-#if 0
-    write(1,"found ",6);
-    write(1,s->s_name,strlen(s->s_name));
-    write(1,"/",1);
-    write(1,s->s_proto,strlen(s->s_proto));
-    write(1,"\n",1);
-    if (!strcmp(name,"auth")) {
-      tmp=s->s_aliases;
-      write(1,"  aka ",5);
-      while (*tmp) {
-	write(1,*tmp,strlen(*tmp));
-	write(1,", ",2);
-	++tmp;
-      }
-      write(1,"\n",1);
-    }
-#endif
-    if (!strcmp(name,s->s_name) && !strcmp(proto,s->s_proto))
-      return s;
-    tmp=s->s_aliases;
-    while (*tmp)
-      if (!strcmp(name,*tmp++)) return s;
-  }
-  return 0;
-}
-
-struct servent *getservbyport(int port, const char *proto) {
-  struct servent *s;
-  for (s=getservent(); s; s=getservent()) {
-    if (port==s->s_port && !strcmp(proto,s->s_proto))
-      return s;
-  }
-  return 0;
-}
-
-void endservent(void) {
-  if (servicesmap!=(char*)-1) munmap(servicesmap,serviceslen);
-  if (servicesfd!=-1) close(servicesfd);
-  servicesmap=(char*)-1;
-  servicesfd=-1;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/getsockname.c b/mdk-stage1/dietlibc/lib/getsockname.c
deleted file mode 100644
index 61a3ea24a..000000000
--- a/mdk-stage1/dietlibc/lib/getsockname.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int getsockname(int a, void * b, int c) {
-#ifdef __i386__
-  return socketcall(SYS_GETSOCKNAME, (long*)&a);
-#else
-  unsigned long args[] = { a, (long) b, c };
-  return socketcall(SYS_GETSOCKNAME, args);
-#endif
-}
-
diff --git a/mdk-stage1/dietlibc/lib/getsockopt.c b/mdk-stage1/dietlibc/lib/getsockopt.c
deleted file mode 100644
index 8c0a57557..000000000
--- a/mdk-stage1/dietlibc/lib/getsockopt.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int getsockopt(int a, int b, int c, void *d, int e) {
-#ifdef __i386__
-  return socketcall(SYS_GETSOCKOPT, (long*)&a);
-#else
-  unsigned long args[] = { a, b, c, (long)d, e };
-  return socketcall(SYS_GETSOCKOPT, args);
-#endif
-}
-
diff --git a/mdk-stage1/dietlibc/lib/htonl.c b/mdk-stage1/dietlibc/lib/htonl.c
deleted file mode 100644
index 490de42c4..000000000
--- a/mdk-stage1/dietlibc/lib/htonl.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <endian.h>
-
-unsigned long int htonl(unsigned long int hostlong) {
-#if __BYTE_ORDER==__LITTLE_ENDIAN
-  return (hostlong>>24) | ((hostlong&0xff0000)>>8) |
-	  ((hostlong&0xff00)<<8) | (hostlong<<24);
-#else
-  return hostlong;
-#endif
-}
-
-unsigned long int ntohl(unsigned long int hostlong) __attribute__((weak,alias("htonl")));
diff --git a/mdk-stage1/dietlibc/lib/htons.c b/mdk-stage1/dietlibc/lib/htons.c
deleted file mode 100644
index 765d3bbc5..000000000
--- a/mdk-stage1/dietlibc/lib/htons.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <endian.h>
-
-unsigned short int htons(unsigned short int hostshort) {
-#if __BYTE_ORDER==__LITTLE_ENDIAN
-  return ((hostshort>>8)&0xff) | (hostshort<<8);
-#else
-  return hostshort;
-#endif
-}
-
-unsigned short int ntohs(unsigned short int hostshort) __attribute__((weak,alias("htons")));
diff --git a/mdk-stage1/dietlibc/lib/if_indextoname.c b/mdk-stage1/dietlibc/lib/if_indextoname.c
deleted file mode 100644
index e683755f6..000000000
--- a/mdk-stage1/dietlibc/lib/if_indextoname.c
+++ /dev/null
@@ -1,29 +0,0 @@
-#include <linux/if.h>
-#include <linux/net.h>
-#include <sys/ioctl.h>
-#include <unistd.h>
-#include <sys/socket.h>
-
-#ifndef SOCK_DGRAM
-#define SOCK_DGRAM 2
-#endif
-
-char* if_indextoname(unsigned int interface,char* blub) {
-  struct ifreq ifr;
-  int fd;
-
-  fd=socket(AF_INET6,SOCK_DGRAM,0);
-  if (fd<0) fd=socket(AF_INET,SOCK_DGRAM,0);
-  ifr.ifr_ifindex=interface;
-  if (ioctl(fd,SIOCGIFNAME,&ifr)==0) {
-    int i;
-    close(fd);
-    for (i=0; i<IFNAMSIZ-1; i++)
-      if (!(blub[i]=ifr.ifr_name[i]))
-	return blub;
-    blub[i]=0;
-    return blub;
-  }
-  close(fd);
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/if_nametoindex.c b/mdk-stage1/dietlibc/lib/if_nametoindex.c
deleted file mode 100644
index 5923963b1..000000000
--- a/mdk-stage1/dietlibc/lib/if_nametoindex.c
+++ /dev/null
@@ -1,27 +0,0 @@
-#include <linux/if.h>
-#include <linux/net.h>
-#include <sys/ioctl.h>
-#include <unistd.h>
-#include <sys/socket.h>
-
-#ifndef SOCK_DGRAM
-#define SOCK_DGRAM 2
-#endif
-
-int if_nametoindex(char* blub) {
-  struct ifreq ifr;
-  int fd;
-  char *tmp;
-  int len=sizeof(ifr.ifr_name);
-  fd=socket(AF_INET6,SOCK_DGRAM,0);
-  if (fd<0) fd=socket(AF_INET,SOCK_DGRAM,0);
-  for (tmp=ifr.ifr_name; len>0; --len) {
-    if ((*tmp++=*blub++)==0) break;
-  }
-  if (ioctl(fd,SIOCGIFINDEX,&ifr)==0) {
-    close(fd);
-    return ifr.ifr_ifindex;
-  }
-  close(fd);
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/isalnum.c b/mdk-stage1/dietlibc/lib/isalnum.c
deleted file mode 100644
index 4d363fab9..000000000
--- a/mdk-stage1/dietlibc/lib/isalnum.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <ctype.h>
-
-int __isalnum_ascii(int c) {
-  return isalpha(c) || isdigit(c);
-}
-
-int isalnum(int c) __attribute__((weak,alias("__isalnum_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isalpha.c b/mdk-stage1/dietlibc/lib/isalpha.c
deleted file mode 100644
index 07ea69696..000000000
--- a/mdk-stage1/dietlibc/lib/isalpha.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <ctype.h>
-
-int __isalpha_ascii(int c) {
-  return (c>='a' && c<='z') || (c>='A' && c<='Z');
-}
-
-int isalpha(int c) __attribute__((weak,alias("__isalpha_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isascii.c b/mdk-stage1/dietlibc/lib/isascii.c
deleted file mode 100644
index e06994783..000000000
--- a/mdk-stage1/dietlibc/lib/isascii.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <ctype.h>
-
-int isascii(int c) {
-  return (c & 0x80) == 0;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/isatty.c b/mdk-stage1/dietlibc/lib/isatty.c
deleted file mode 100644
index b31609720..000000000
--- a/mdk-stage1/dietlibc/lib/isatty.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#define ioctl libc_ioctl
-#include <termios.h>
-#undef ioctl
-#include <sys/ioctl.h>
-
-extern int errno;
-
-int isatty(int fd)
-{
-  int save;
-  int is_tty;
-  struct termios term;
-
-  save = errno;
-  is_tty = ioctl(fd, TCGETS, &term) == 0;
-  errno = save;
-
-  return is_tty;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/isblank.c b/mdk-stage1/dietlibc/lib/isblank.c
deleted file mode 100644
index 034e543b1..000000000
--- a/mdk-stage1/dietlibc/lib/isblank.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <ctype.h>
-
-int isblank(int ch)
-{
-  return ((ch==' ')||(ch=='\t'));
-}
diff --git a/mdk-stage1/dietlibc/lib/iscntrl.c b/mdk-stage1/dietlibc/lib/iscntrl.c
deleted file mode 100644
index a183a54f1..000000000
--- a/mdk-stage1/dietlibc/lib/iscntrl.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <ctype.h>
-
-int __iscntrl_ascii(int c) {
-  return (c<32) || (c==127);
-}
-
-int iscntrl(int c) __attribute__((weak,alias("__iscntrl_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isdigit.c b/mdk-stage1/dietlibc/lib/isdigit.c
deleted file mode 100644
index 8a7c3e801..000000000
--- a/mdk-stage1/dietlibc/lib/isdigit.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <ctype.h>
-
-int __isdigit_ascii(int c) {
-  return (c>='0' && c<='9');
-}
-
-int isdigit(int c) __attribute__((weak,alias("__isdigit_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isgraph.c b/mdk-stage1/dietlibc/lib/isgraph.c
deleted file mode 100644
index 807f90ff0..000000000
--- a/mdk-stage1/dietlibc/lib/isgraph.c
+++ /dev/null
@@ -1,5 +0,0 @@
-int __isgraph_ascii(int c) {
-  return (c>=33 && c<=126);
-}
-
-int isgraph(int c) __attribute__((weak,alias("__isgraph_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/islower.c b/mdk-stage1/dietlibc/lib/islower.c
deleted file mode 100644
index 6a9afa519..000000000
--- a/mdk-stage1/dietlibc/lib/islower.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <ctype.h>
-
-int __islower_ascii(int c) {
-  return (c>='a' && c<='z');
-}
-
-int islower(int c) __attribute__((weak,alias("__islower_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isprint.c b/mdk-stage1/dietlibc/lib/isprint.c
deleted file mode 100644
index e980658a5..000000000
--- a/mdk-stage1/dietlibc/lib/isprint.c
+++ /dev/null
@@ -1,6 +0,0 @@
-
-int __isprint_ascii(int c) {
-  return (c>=32 && c<=126);
-}
-
-int isprint(int c) __attribute__((weak,alias("__isprint_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/ispunct.c b/mdk-stage1/dietlibc/lib/ispunct.c
deleted file mode 100644
index 2fd1183b1..000000000
--- a/mdk-stage1/dietlibc/lib/ispunct.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <ctype.h>
-
-int __ispunct_ascii(int c) {
-  return isprint(c) && !( isalnum(c) || isspace(c) );
-}
-
-int ispunct(int c) __attribute__((weak,alias("__ispunct_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isspace.c b/mdk-stage1/dietlibc/lib/isspace.c
deleted file mode 100644
index 916f784ab..000000000
--- a/mdk-stage1/dietlibc/lib/isspace.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <ctype.h>
-
-int __isspace_ascii(int ch)
-{
-  return ((ch==' ')||(ch=='\f')||(ch=='\t')||(ch=='\v')||(ch=='\r')||(ch=='\n'));
-}
-
-int isspace(int c) __attribute__((weak,alias("__isspace_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isupper.c b/mdk-stage1/dietlibc/lib/isupper.c
deleted file mode 100644
index 933dfc169..000000000
--- a/mdk-stage1/dietlibc/lib/isupper.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <ctype.h>
-
-int __isupper_ascii(int c) {
-  return (c>='A' && c<='Z');
-}
-
-int isupper(int c) __attribute__((weak,alias("__isupper_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isxdigit.c b/mdk-stage1/dietlibc/lib/isxdigit.c
deleted file mode 100644
index 22a711f2d..000000000
--- a/mdk-stage1/dietlibc/lib/isxdigit.c
+++ /dev/null
@@ -1,5 +0,0 @@
-int __isxdigit_ascii(int c) {
-  return ((c>='0'&&c<='9') || (c>='A'&&c<='F') || (c>='a'&&c<='f'));
-}
-
-int isxdigit(int c) __attribute__((weak,alias("__isxdigit_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/listen.c b/mdk-stage1/dietlibc/lib/listen.c
deleted file mode 100644
index 56a51be06..000000000
--- a/mdk-stage1/dietlibc/lib/listen.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int listen(int a, int b) {
-#ifdef __i386__
-  return socketcall(SYS_LISTEN, (long*)&a);
-#else
-  unsigned long args[] = { a, b, 0 };
-  return socketcall(SYS_LISTEN, args);
-#endif
-}
-
diff --git a/mdk-stage1/dietlibc/lib/lockf.c b/mdk-stage1/dietlibc/lib/lockf.c
deleted file mode 100644
index 2b1d004ef..000000000
--- a/mdk-stage1/dietlibc/lib/lockf.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <sys/types.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <errno.h>
-
-int lockf(int fd, int cmd, off_t len) {
-  struct flock fl;
-  fl.l_whence=SEEK_CUR;
-  fl.l_start=0;
-  fl.l_len=len;
-  fl.l_pid=0;
-  switch (cmd) {
-  case F_TEST:
-    if (fcntl(fd,F_GETLK,&fl)<0)
-      return -1;
-    if (fl.l_type == F_UNLCK || fl.l_pid == getpid ())
-      return 0;
-    errno=EACCES;
-    return -1;
-  case F_ULOCK:
-    fl.l_type=F_UNLCK;
-    cmd=F_SETLK;
-    break;
-  case F_LOCK:
-    fl.l_type = F_WRLCK;
-    cmd = F_SETLKW;
-    break;
-  case F_TLOCK:
-    fl.l_type = F_WRLCK;
-    cmd = F_SETLK;
-    break;
-  default:
-    errno=EINVAL;
-    return -1;
-  }
-  return fcntl(fd,cmd,&fl);
-}
diff --git a/mdk-stage1/dietlibc/lib/longjmp.c b/mdk-stage1/dietlibc/lib/longjmp.c
deleted file mode 100644
index d0a5719c1..000000000
--- a/mdk-stage1/dietlibc/lib/longjmp.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/* Copyright (C) 1991, 92, 94, 95, 97, 98 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* #include <stddef.h> */
-#include <setjmp.h>
-#include <signal.h>
-
-extern int __sigprocmask(int how,void* set,void* oldset);
-extern void __longjmp(void* env, int val);
-
-/*
-extern void _longjmp_unwind (jmp_buf env, int val);
-*/
-/* Set the signal mask to the one specified in ENV, and jump
-   to the position specified in ENV, causing the setjmp
-   call there to return VAL, or 1 if VAL is 0.  */
-void __siglongjmp (sigjmp_buf env, int val)
-{
-  /* Perform any cleanups needed by the frames being unwound.  */
-  /*
-  _longjmp_unwind (env, val);
-  */
-
-  if (env[0].__mask_was_saved)
-    /* Restore the saved signal mask.  */
-    (void) __sigprocmask (SIG_SETMASK, &env[0].__saved_mask,
-			  (sigset_t *) NULL);
-
-  /* Call the machine-dependent function to restore machine state.  */
-  __longjmp (env[0].__jmpbuf, val ?: 1);
-}
-
-void siglongjmp (sigjmp_buf env, int val) __attribute__((weak,alias("__siglongjmp")));
-void longjmp (sigjmp_buf env, int val) __attribute__((weak,alias("__siglongjmp")));
-void _longjmp (sigjmp_buf env, int val) __attribute__((weak,alias("__siglongjmp")));
-void __libc_longjmp (sigjmp_buf env, int val) __attribute__((weak,alias("__siglongjmp")));
diff --git a/mdk-stage1/dietlibc/lib/lseek64.c b/mdk-stage1/dietlibc/lib/lseek64.c
deleted file mode 100644
index f39e779f9..000000000
--- a/mdk-stage1/dietlibc/lib/lseek64.c
+++ /dev/null
@@ -1,22 +0,0 @@
-#include "dietfeatures.h"
-
-#ifdef WANT_LARGEFILE_BACKCOMPAT
-#include <sys/stat.h>
-#ifndef __NO_STAT64
-#include <errno.h>
-#include <unistd.h>
-
-loff_t lseek64(int fildes, loff_t offset, int whence) {
-  loff_t tmp;
-  if (llseek(fildes,offset>>32,offset&0xffffffff,&tmp,whence)) {
-#ifdef WANT_THREAD_SAFE
-    if (*__errno_location()!=ENOSYS) return -1;
-#else
-    if (errno!=ENOSYS) return -1;
-#endif
-    return (loff_t)lseek(fildes,(off_t)offset,whence);
-  }
-  return tmp;
-}
-#endif
-#endif
diff --git a/mdk-stage1/dietlibc/lib/memccmp.c b/mdk-stage1/dietlibc/lib/memccmp.c
deleted file mode 100644
index 3a8c14f60..000000000
--- a/mdk-stage1/dietlibc/lib/memccmp.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#define _POSIX_SOURCE
-#define _XOPEN_SOURCE
-#include <sys/types.h>
-
-int memccmp(const void *dst, const void *src, int c, size_t count)
-{
-  register const char *a = dst;
-  register const char *b = src;
-  while (count--)
-  {
-    register int res=(*a - *b);
-    if (res) return res;
-    if (*a==c) return 0;
-    ++a; ++b;
-  }
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/memccpy.c b/mdk-stage1/dietlibc/lib/memccpy.c
deleted file mode 100644
index 6d6ac98ab..000000000
--- a/mdk-stage1/dietlibc/lib/memccpy.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#define _POSIX_SOURCE
-#define _XOPEN_SOURCE
-#include <sys/types.h>
-
-void *memccpy(void *dst, const void *src, int c, size_t count)
-{
-  char *a = dst;
-  const char *b = src;
-  while (count--)
-  {
-    *a++ = *b;
-    if (*b==c)
-    {
-      return (void *)a;
-    }
-    b++;
-  }
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/memchr.c b/mdk-stage1/dietlibc/lib/memchr.c
deleted file mode 100644
index 93d81328a..000000000
--- a/mdk-stage1/dietlibc/lib/memchr.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <sys/types.h>
-
-char *memchr(const char *s, int c, size_t n) {
-  int i;
-  for (i=n; i; --i)
-    if (*s++==c)
-      return (char*)s;
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/memcmp.c b/mdk-stage1/dietlibc/lib/memcmp.c
deleted file mode 100644
index c05a46863..000000000
--- a/mdk-stage1/dietlibc/lib/memcmp.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <sys/types.h>
-
-int memcmp(const void *dst, const void *src, size_t count) {
-  register int r;
-  register const char *d=dst;
-  register const char *s=src;
-  while (count--) {
-    if ((r=(*d - *s)))
-      return r;
-    ++d;
-    ++s;
-  }
-  return 0;
-}
-
-int bcmp(const char *a,const char *b,size_t c)	__attribute__((weak,alias("memcmp")));
diff --git a/mdk-stage1/dietlibc/lib/memcpy.c b/mdk-stage1/dietlibc/lib/memcpy.c
deleted file mode 100644
index 0c688b509..000000000
--- a/mdk-stage1/dietlibc/lib/memcpy.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <sys/types.h>
-
-void* memcpy(void* dst, const void* src, size_t count) {
-  register char *d=dst;
-  register const char *s=src;
-  ++count;	/* this actually produces better code than using count-- */
-  while (--count) {
-    *d = *s;
-    ++d; ++s;
-  }
-  return dst;
-}
diff --git a/mdk-stage1/dietlibc/lib/memmove.c b/mdk-stage1/dietlibc/lib/memmove.c
deleted file mode 100644
index 7adb2be91..000000000
--- a/mdk-stage1/dietlibc/lib/memmove.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#define _POSIX_SOURCE
-#define _XOPEN_SOURCE
-#include <sys/types.h>
-
-void *memmove(void *dst, const void *src, size_t count)
-{
-  char *a = dst;
-  const char *b = src;
-  if (src!=dst)
-  {
-    if (src>dst)
-    {
-      while (count--) *a++ = *b++;
-    }
-    else
-    {
-      a+=count-1;
-      b+=count-1;
-      while (count--) *a-- = *b--;
-    }
-  }
-  return dst;
-}
diff --git a/mdk-stage1/dietlibc/lib/memset.c b/mdk-stage1/dietlibc/lib/memset.c
deleted file mode 100644
index 5f9ae49ee..000000000
--- a/mdk-stage1/dietlibc/lib/memset.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <sys/types.h>
-
-void * memset(void * dst, int s, size_t count) {
-    register char * a = dst;
-    count++;	/* this actually creates smaller code than using count-- */
-    while (--count)
-	*a++ = s;
-    return dst;
-}
diff --git a/mdk-stage1/dietlibc/lib/mkfifo.c b/mdk-stage1/dietlibc/lib/mkfifo.c
deleted file mode 100644
index 596efbe27..000000000
--- a/mdk-stage1/dietlibc/lib/mkfifo.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <linux/stat.h>
-#include <unistd.h>
-
-int mkfifo(const char *fn,mode_t mode) {
-  return mknod(fn,S_IFIFO|mode,0);
-}
diff --git a/mdk-stage1/dietlibc/lib/msgctl.c b/mdk-stage1/dietlibc/lib/msgctl.c
deleted file mode 100644
index 19ea6d8cf..000000000
--- a/mdk-stage1/dietlibc/lib/msgctl.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/msg.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int msgctl(int msqid, int cmd, struct msqid_ds *buf) {
-  return __ipc(MSGCTL,msqid,cmd,0,buf);
-}
diff --git a/mdk-stage1/dietlibc/lib/msgget.c b/mdk-stage1/dietlibc/lib/msgget.c
deleted file mode 100644
index 9bca09ebe..000000000
--- a/mdk-stage1/dietlibc/lib/msgget.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/msg.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int msgget(key_t key,int flag) {
-  return __ipc(MSGGET,key,flag,0,0);
-}
diff --git a/mdk-stage1/dietlibc/lib/msgrcv.c b/mdk-stage1/dietlibc/lib/msgrcv.c
deleted file mode 100644
index b4ae9cc6c..000000000
--- a/mdk-stage1/dietlibc/lib/msgrcv.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/msg.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int msgrcv(int msqid, void *msgp, size_t msgsz, long int msgtyp, int msgflg) {
-  struct ipc_kludge tmp;
-  tmp.msgp = msgp;
-  tmp.msgtyp = msgtyp;
-  return __ipc(MSGRCV,msqid, msgsz, msgflg, &tmp);
-}
diff --git a/mdk-stage1/dietlibc/lib/msgsnd.c b/mdk-stage1/dietlibc/lib/msgsnd.c
deleted file mode 100644
index 6203053f0..000000000
--- a/mdk-stage1/dietlibc/lib/msgsnd.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/msg.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int msgsnd (int msqid, const void *msgp, size_t msgsz, int msgflg) {
-  return __ipc(MSGSND,msqid, msgsz, msgflg, msgp);
-}
diff --git a/mdk-stage1/dietlibc/lib/nop.c b/mdk-stage1/dietlibc/lib/nop.c
deleted file mode 100644
index c05bea813..000000000
--- a/mdk-stage1/dietlibc/lib/nop.c
+++ /dev/null
@@ -1,7 +0,0 @@
-
-int __fflush_stdin()	 __attribute__((weak,alias("__return0")));
-int __fflush_stdout()	 __attribute__((weak,alias("__return0")));
-int __fflush_stderr()	 __attribute__((weak,alias("__return0")));
-
-/* used for weak aliases */
-int __return0() { return 0; }
diff --git a/mdk-stage1/dietlibc/lib/open64.c b/mdk-stage1/dietlibc/lib/open64.c
deleted file mode 100644
index f1499d017..000000000
--- a/mdk-stage1/dietlibc/lib/open64.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <linux/types.h>
-#include <linux/fcntl.h>
-
-#ifndef O_LARGEFILE
-#define O_LARGEFILE 0
-#endif
-
-extern int open(const char* file,int oflag,int mode);
-
-int __libc_open64(const char* file,int oflag,int mode) {
-  return open(file,oflag|O_LARGEFILE,mode);
-}
-
-int open64(const char* file,int oflag,int mode) __attribute__((weak,alias("__libc_open64")));
diff --git a/mdk-stage1/dietlibc/lib/opendir.c b/mdk-stage1/dietlibc/lib/opendir.c
deleted file mode 100644
index 5c0c4a305..000000000
--- a/mdk-stage1/dietlibc/lib/opendir.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include "dietdirent.h"
-#include <unistd.h>
-#include <dirent.h>
-#include <stdlib.h>
-#include <fcntl.h>
-
-DIR *opendir (const char *name) {
-  DIR *t=(DIR*)malloc(sizeof(DIR));
-  if (t) {
-    if ((t->fd=open(name,O_RDONLY|O_DIRECTORY))>=0) {
-      t->num=t->cur=0;
-    } else {
-      free(t);
-      t=0;
-    }
-  }
-  return t;
-}
diff --git a/mdk-stage1/dietlibc/lib/perror.c b/mdk-stage1/dietlibc/lib/perror.c
deleted file mode 100644
index ecab7250b..000000000
--- a/mdk-stage1/dietlibc/lib/perror.c
+++ /dev/null
@@ -1,22 +0,0 @@
-#include "dietfeatures.h"
-#include <unistd.h>
-#include <string.h>
-#include <errno.h>
-
-extern char *sys_errlist[];
-extern int sys_nerr;
-extern int errno;
-
-void perror(const char *s) {
-  register char *message="[unknown error]";
-  write(2,s,strlen(s));
-  write(2,": ",2);
-  if (errno>=0 && errno<sys_nerr)
-#ifdef WANT_THREAD_SAFE
-    message=sys_errlist[*__errno_location()];
-#else
-    message=sys_errlist[errno];
-#endif
-  write(2,message,strlen(message));
-  write(2,"\n",1);
-}
diff --git a/mdk-stage1/dietlibc/lib/pread.c b/mdk-stage1/dietlibc/lib/pread.c
deleted file mode 100644
index b922aa93e..000000000
--- a/mdk-stage1/dietlibc/lib/pread.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <endian.h>
-#include <sys/types.h>
-
-extern size_t __pread(int fd, void *buf, size_t count, off_t a,off_t b);
-
-size_t __libc_pread(int fd, void *buf, size_t count, off_t offset) {
-  return __pread(fd,buf,count,offset,0);
-}
-
-int pread(int fd, void *buf, size_t count, off_t offset) __attribute__((weak,alias("__libc_pread")));
diff --git a/mdk-stage1/dietlibc/lib/pread64.c b/mdk-stage1/dietlibc/lib/pread64.c
deleted file mode 100644
index e6ba4d103..000000000
--- a/mdk-stage1/dietlibc/lib/pread64.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <endian.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-#ifndef __NO_STAT64
-extern size_t __pread(int fd, void *buf, size_t count, off_t a,off_t b);
-
-size_t __libc_pread64(int fd, void *buf, size_t count, off64_t offset) {
-  return __pread(fd,buf,count,__LONG_LONG_PAIR (offset&0xffffffff,offset>>32));
-}
-
-int pread64(int fd, void *buf, size_t count, off_t offset) __attribute__((weak,alias("__libc_pread64")));
-#endif
diff --git a/mdk-stage1/dietlibc/lib/putenv.c b/mdk-stage1/dietlibc/lib/putenv.c
deleted file mode 100644
index 274b16b0e..000000000
--- a/mdk-stage1/dietlibc/lib/putenv.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <stdlib.h>
-#include <string.h>
-
-int putenv(const char *string) {
-  int len;
-  int envc;
-  char *tmp;
-  const char **ep;
-  char **newenv;
-  static char **origenv=0;
-  if (!origenv) origenv=environ;
-  if (!(tmp=strchr(string,'=')))
-    len=strlen(string);
-  else
-    len=tmp-string+1;
-  for (envc=0, ep=(const char**)environ; *ep; ++ep) {
-    if (!memcmp(string,*ep,len)) { /* found */
-      if (!tmp) {
-	for (; ep[1]; ++ep) ep[0]=ep[1];
-	ep[0]=0;
-	return 0;
-      }
-      *ep=string;
-      return 0;
-    }
-    ++envc;
-  }
-  if (tmp) {
-    newenv=(char**)malloc((envc+2)*sizeof(char*));
-    if (!newenv) return -1;
-    newenv[0]=(char*)string;
-    memcpy(newenv+1,environ,(envc+1)*sizeof(char*));
-    if (environ!=origenv) free(environ);
-    environ=newenv;
-  }
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/puts.c b/mdk-stage1/dietlibc/lib/puts.c
deleted file mode 100644
index 54415151d..000000000
--- a/mdk-stage1/dietlibc/lib/puts.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <unistd.h>
-#include <string.h>
-#include "dietstdio.h"
-#include "dietfeatures.h"
-
-int puts(const char *s) {
-#ifdef WANT_BUFFERED_STDIO
-  return fwrite(s,1,strlen(s),stdout) && fputc('\n',stdout);
-#else
-  return write(1,s,strlen(s)) && write(1,"\n",1);
-#endif
-}
diff --git a/mdk-stage1/dietlibc/lib/qsort.c b/mdk-stage1/dietlibc/lib/qsort.c
deleted file mode 100644
index 2a8824bf3..000000000
--- a/mdk-stage1/dietlibc/lib/qsort.c
+++ /dev/null
@@ -1,125 +0,0 @@
-#include <stdlib.h>
-#include <assert.h>
-
-/* comments:
-     1. insertion sort sofort, nicht nachtr�glich
-     2. threshold = 16
- */
-
-static inline void iswap(void *a,void *b,size_t size) {
-  register char *x=a;
-  register char *y=b;
-  register char *z=x+size;
-  while (x<z) {
-    register char tmp=*x;
-    *x=*y;
-    *y=tmp;
-    ++x; ++y;
-  }
-}
-
-static inline void swap(void *base,size_t size,size_t a,size_t b) {
-  iswap(base+a*size,base+b*size,size);
-}
-
-#if 0
-extern int array[];
-
-void dumparray() {
-  printf("array now {%d,%d,%d,%d,%d}\n",array[0],array[1],array[2],array[3],array[4]);
-}
-#endif
-
-void isort(void *base, size_t nmemb, size_t size, int (*compar)(const void *, const void *)) {
-  int i;
-  while (nmemb>1) {
-    char *min=base;
-    char *tmp=min+size;
-    for (i=1; i<nmemb; ++i) {
-      if (compar(tmp,min)<0)
-	min=tmp;
-      tmp+=size;
-    }
-    iswap(min,base,size);
-    base+=size;
-    nmemb-=1;
-  }
-}
-
-void qsort(void *base, size_t nmemb, size_t size, int (*compar)(const void *, const void *)) {
-#ifdef DEBUG
-  char *dbase=base;
-  char *dmax=base+(nmemb-1)*size;
-  char dmemb=nmemb;
-#endif
-  static int level=0;
-  char* v;	/* pivot */
-  char* mid, *max, *min;
-  int lmemb;
-
-#if 0
-  int left,right;
-  left=(int*)base-array;
-  right=left+nmemb-1;
-  ++level;
-  { int i; for (i=0; i<level; ++i) printf("  "); }
-  printf("qsort: level %d; base=%p, %dx%d; array[%d..%d]\n",level,base,nmemb,size,left,right);
-  assert(left>=0 && right<=1000);
-#endif
-  if (nmemb<=8) {
-    --level;
-    return isort(base,nmemb,size,compar);
-  }
-  {
-    mid=base+(nmemb/2)*size;
-    max=base+(nmemb-1)*size;
-
-    if (compar(base,max)<0)	/* a[left] < a[right] */
-      if (compar(base,mid)<0)	/* a[left] < a[med] */
-	if (compar(max,mid)<0)	/* a[left] < a[right] < a[med] */
-	  v=max;
-	else			/* a[left] < a[med] < a[right] */
-	  v=mid;
-      else			/* a[med] < a[left] < a[right] */
-	v=base;
-    else			/* a[right] < a[left] */
-      if (compar(base,mid)<0)	/* a[right] < a[left] < a[med] */
-	v=base;
-      else			/* a[right] < a[left] && a[med] < a[left] */
-	if (compar(max,mid)<0)	/* a[right] < a[med] < a[left] */
-	  v=mid;
-	else
-	  v=max;
-//    printf("%d %d %d -> median %d\n",*(int*)base,*(int*)mid,*(int*)max,*(int*)v);
-  }
-  if (v != max)
-    iswap(v,max,size);
-  v=max;
-  min=base; lmemb=0;
-  for (;;) {
-    while (compar(min,v)<0) { min+=size; ++lmemb; }
-    while (compar(max-=size,v)>0) ;
-    if (min>=max) break;
-    iswap(min,max,size);
-  }
-  iswap(min,v,size);
-#ifdef DEBUG
-//    { int i; for (i=0; i<level; ++i) printf("  "); }
-//    printf("-=< base=%p, min=%p, nmemb=%d, lmemb=%d (%d)\n",base,min,nmemb,lmemb,(min-(char*)base)/size);
-    assert(lmemb==((min-(char*)base)/size));
-#endif
-  if (min>(char*)base+size) {
-#ifdef DEBUG
-    assert(base==dbase);
-#endif
-//    { int i; for (i=0; i<level; ++i) printf("  "); }
-//    printf("+-left %d [%d..%d] of [%d..%d]\n",level+1,left,left+lmemb,left,right);
-    qsort(base,lmemb,size,compar);
-  }
-  if (nmemb>lmemb+1) {
-//    { int i; for (i=0; i<level; ++i) printf("  "); }
-//    printf("+-right %d [%d..%d] of [%d..%d]\n",level+1,left+lmemb,right,left,right);
-    qsort(min+size,nmemb-lmemb-1,size,compar);
-  }
-  --level;
-}
diff --git a/mdk-stage1/dietlibc/lib/raise.c b/mdk-stage1/dietlibc/lib/raise.c
deleted file mode 100644
index 606546034..000000000
--- a/mdk-stage1/dietlibc/lib/raise.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <linux/types.h>
-#include <unistd.h>
-#include <signal.h>
-#include "syscalls.h"
-
-int raise(int sig) {
-  return kill(getpid(),sig);
-}
diff --git a/mdk-stage1/dietlibc/lib/rand.c b/mdk-stage1/dietlibc/lib/rand.c
deleted file mode 100644
index 10bfaf94d..000000000
--- a/mdk-stage1/dietlibc/lib/rand.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <stdlib.h>
-
-static unsigned int seed=1;
-
-int rand() {
-  return ((seed = seed * 1103515245 + 12345) % ((unsigned int)RAND_MAX + 1));
-}
-
-void srand(unsigned int i) { seed=i; }
diff --git a/mdk-stage1/dietlibc/lib/random.c b/mdk-stage1/dietlibc/lib/random.c
deleted file mode 100644
index e7785c455..000000000
--- a/mdk-stage1/dietlibc/lib/random.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <stdlib.h>
-
-static unsigned int seed=1;
-
-long int random() {
-  return ((seed = seed * 1103515245 + 12345) % ((unsigned int)RAND_MAX + 1));
-}
-
-void srandom(unsigned int i) { seed=i; }
diff --git a/mdk-stage1/dietlibc/lib/readdir.c b/mdk-stage1/dietlibc/lib/readdir.c
deleted file mode 100644
index 689f5d08b..000000000
--- a/mdk-stage1/dietlibc/lib/readdir.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include "dietdirent.h"
-#include <unistd.h>
-#include <dirent.h>
-#include <stdlib.h>
-
-struct dirent* readdir(DIR *d) {
-  if (!d->num || (d->cur += ((struct dirent*)(d->buf+d->cur))->d_reclen)>=d->num) {
-    int res=getdents(d->fd,(struct dirent*)d->buf,1023);
-    if (res<=0) return 0;
-    d->num=res; d->cur=0;
-  }
-  return (struct dirent*)(d->buf+d->cur);
-}
diff --git a/mdk-stage1/dietlibc/lib/reboot.c b/mdk-stage1/dietlibc/lib/reboot.c
deleted file mode 100644
index 7f47a95dd..000000000
--- a/mdk-stage1/dietlibc/lib/reboot.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <sys/reboot.h>
-
-int __reboot(int magic1, int magic2, int cmd, void * arg);
-
-int reboot(int cmd, void *arg)
-{
-  return __reboot(LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2, cmd, arg);
-}
diff --git a/mdk-stage1/dietlibc/lib/recv.c b/mdk-stage1/dietlibc/lib/recv.c
deleted file mode 100644
index bc6b1e5d7..000000000
--- a/mdk-stage1/dietlibc/lib/recv.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_recv(int a, const void * b, size_t c, int flags) {
-#ifdef __i386__
-  return socketcall(SYS_RECV,(long*)&a);
-#else
-  unsigned long args[] = { a, (long) b, c, flags };
-  return socketcall(SYS_RECV, args);
-#endif
-}
-
-int recv(int a, const void * b, size_t c, int flags)
-  __attribute__ ((weak, alias("__libc_recv")));
diff --git a/mdk-stage1/dietlibc/lib/recvfrom.c b/mdk-stage1/dietlibc/lib/recvfrom.c
deleted file mode 100644
index 802ad665f..000000000
--- a/mdk-stage1/dietlibc/lib/recvfrom.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_recvfrom(int a, const void * b, size_t c, int flags, void *to, void *tolen) {
-#ifdef __i386__
-  return socketcall(SYS_RECVFROM, (long*)&a);
-#else
-  unsigned long args[] = { a, (long) b, c, flags, (long) to, (long) tolen };
-  return socketcall(SYS_RECVFROM, args);
-#endif
-}
-
-int recvfrom(int a, const void * b, size_t c, int flags, void *to, void *tolen)
- __attribute__ ((weak,alias("__libc_recvfrom"))) ;
diff --git a/mdk-stage1/dietlibc/lib/recvmsg.c b/mdk-stage1/dietlibc/lib/recvmsg.c
deleted file mode 100644
index c14c58c78..000000000
--- a/mdk-stage1/dietlibc/lib/recvmsg.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_recvmsg(int a, struct msghdr* msg, int flags) {
-#ifdef __i386__
-  return socketcall(SYS_RECVMSG, (long*)&a);
-#else
-  unsigned long args[] = { a, (long) msg, flags };
-  return socketcall(SYS_RECVMSG, args);
-#endif
-}
-
-int recvmsg(int a, struct msghdr *msg, int flags)
- __attribute__ ((weak,alias("__libc_recvmsg"))) ;
diff --git a/mdk-stage1/dietlibc/lib/remove.c b/mdk-stage1/dietlibc/lib/remove.c
deleted file mode 100644
index d5125bfed..000000000
--- a/mdk-stage1/dietlibc/lib/remove.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-int remove(const char* filename) {
-  if (unlink(filename)) {
-    if (errno==EISDIR)
-      return rmdir(filename);
-    return -1;
-  }
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/rewind.c b/mdk-stage1/dietlibc/lib/rewind.c
deleted file mode 100644
index 48434a316..000000000
--- a/mdk-stage1/dietlibc/lib/rewind.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <dietstdio.h>
-#include <unistd.h>
-
-void rewind( FILE *stream) {
-  fseek(stream, 0L, SEEK_SET);
-}
diff --git a/mdk-stage1/dietlibc/lib/rewinddir.c b/mdk-stage1/dietlibc/lib/rewinddir.c
deleted file mode 100644
index addc7bde9..000000000
--- a/mdk-stage1/dietlibc/lib/rewinddir.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include "dietdirent.h"
-#include <unistd.h>
-#include <dirent.h>
-
-void rewinddir(DIR *d) {
-  if (lseek(d->fd,0,SEEK_SET) != (off_t)-1)
-    d->num=d->cur=0;
-}
diff --git a/mdk-stage1/dietlibc/lib/sbrk.c b/mdk-stage1/dietlibc/lib/sbrk.c
deleted file mode 100644
index 945ad5a16..000000000
--- a/mdk-stage1/dietlibc/lib/sbrk.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <unistd.h>
-
-extern int __brk(void *end_data_segment);
-
-extern void* __curbrk;
-
-void* __sbrk(ptrdiff_t increment) {
-  void* oldbrk;
-  if (__curbrk==0)
-    if (__brk(0) < 0)
-      return (void*)-1;
-  if (increment==0)
-    return __curbrk;
-  oldbrk=__curbrk;
-  if (__brk(oldbrk+increment)<0)
-    return (void*)-1;
-  return oldbrk;
-}
-
-void* sbrk (ptrdiff_t increment) __attribute__((weak,alias("__sbrk")));
diff --git a/mdk-stage1/dietlibc/lib/seekdir.c b/mdk-stage1/dietlibc/lib/seekdir.c
deleted file mode 100644
index cf111fbc8..000000000
--- a/mdk-stage1/dietlibc/lib/seekdir.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include "dietdirent.h"
-#include <unistd.h>
-#include <dirent.h>
-
-void seekdir(DIR *d,off_t offset) {
-  if (lseek(d->fd,offset,SEEK_SET) != (off_t)-1)
-    d->num=d->cur=0;
-}
diff --git a/mdk-stage1/dietlibc/lib/semctl.c b/mdk-stage1/dietlibc/lib/semctl.c
deleted file mode 100644
index ddc0aae95..000000000
--- a/mdk-stage1/dietlibc/lib/semctl.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/sem.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int semctl(int semid, int semnum, int cmd, union semun arg) {
-  return __ipc(SEMCTL,semid,semnum,cmd,&arg);
-}
diff --git a/mdk-stage1/dietlibc/lib/semget.c b/mdk-stage1/dietlibc/lib/semget.c
deleted file mode 100644
index 056aeae04..000000000
--- a/mdk-stage1/dietlibc/lib/semget.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/sem.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int semget(key_t key, int nsems, int semflg) {
-  return __ipc(SEMGET,key,nsems,semflg,0);
-}
diff --git a/mdk-stage1/dietlibc/lib/semop.c b/mdk-stage1/dietlibc/lib/semop.c
deleted file mode 100644
index abfde73a7..000000000
--- a/mdk-stage1/dietlibc/lib/semop.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/sem.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int semop(int semid,struct sembuf *sops,unsigned nsops) {
-  return __ipc(SEMOP,semid,nsops,0,sops);
-}
diff --git a/mdk-stage1/dietlibc/lib/send.c b/mdk-stage1/dietlibc/lib/send.c
deleted file mode 100644
index c1adf1b5d..000000000
--- a/mdk-stage1/dietlibc/lib/send.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_send(int a, const void * b, size_t c, int flags) {
-#ifdef __i386__
-  return socketcall(SYS_SEND, (long*)&a);
-#else
-  unsigned long args[] = { a, (long) b, c, flags };
-  return socketcall(SYS_SEND, args);
-#endif
-}
-
-int send(int a, const void * b, size_t c, int flags)
-  __attribute__ ((weak, alias("__libc_send")));
diff --git a/mdk-stage1/dietlibc/lib/sendmsg.c b/mdk-stage1/dietlibc/lib/sendmsg.c
deleted file mode 100644
index 277265985..000000000
--- a/mdk-stage1/dietlibc/lib/sendmsg.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_sendmsg(int a, const struct msghdr* msg, int flags) {
-#ifdef __i386__
-  return socketcall(SYS_SENDMSG, (long*)&a);
-#else
-  unsigned long args[] = { a, (long) msg, flags };
-  return socketcall(SYS_SENDMSG, args);
-#endif
-}
-
-int sendmsg(int a, const struct msghdr *msg, int flags)
- __attribute__ ((weak,alias("__libc_sendmsg"))) ;
diff --git a/mdk-stage1/dietlibc/lib/sendto.c b/mdk-stage1/dietlibc/lib/sendto.c
deleted file mode 100644
index 078c010ea..000000000
--- a/mdk-stage1/dietlibc/lib/sendto.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_sendto(int a, const void * b, size_t c, int flags, void *to, int tolen) {
-#ifdef __i386__
-  return socketcall(SYS_SENDTO, (long*)&a);
-#else
-  unsigned long args[] = { a, (long) b, c, flags, (long) to, tolen };
-  return socketcall(SYS_SENDTO, args);
-#endif
-}
-
-int sendto(int a, const void * b, size_t c, int flags, void *to, int tolen)
-  __attribute__ ((weak, alias("__libc_sendto")));
diff --git a/mdk-stage1/dietlibc/lib/set_errno.c b/mdk-stage1/dietlibc/lib/set_errno.c
deleted file mode 100644
index 6553bc496..000000000
--- a/mdk-stage1/dietlibc/lib/set_errno.c
+++ /dev/null
@@ -1,9 +0,0 @@
-extern int errno;
-
-void __set_errno(int error) __attribute__ ((weak));
-
-void __set_errno(int error)
-{
-  errno=error;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/setpgrp.c b/mdk-stage1/dietlibc/lib/setpgrp.c
deleted file mode 100644
index 825ca3725..000000000
--- a/mdk-stage1/dietlibc/lib/setpgrp.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <unistd.h>
-
-int setpgrp()
-{
-  return setpgid(0,0);
-}
diff --git a/mdk-stage1/dietlibc/lib/setsockopt.c b/mdk-stage1/dietlibc/lib/setsockopt.c
deleted file mode 100644
index 781e9c31c..000000000
--- a/mdk-stage1/dietlibc/lib/setsockopt.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int setsockopt(int a, int b, int c, void *d, void *e) {
-#ifdef __i386__
-  return socketcall(SYS_SETSOCKOPT, (long*)&a);
-#else
-  unsigned long args[] = { a, b, c, (long)d, (long) e };
-  return socketcall(SYS_SETSOCKOPT, args);
-#endif
-}
-
diff --git a/mdk-stage1/dietlibc/lib/shmat.c b/mdk-stage1/dietlibc/lib/shmat.c
deleted file mode 100644
index 63284b1ea..000000000
--- a/mdk-stage1/dietlibc/lib/shmat.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-#include <asm/ipc.h>
-
-extern void* __ipc();
-
-void* shmat(int shmid,const void* shmaddr,int shmflg) {
-  void* raddr;
-  register void* result;
-  result=__ipc(SHMAT,shmid,shmflg,&raddr,shmaddr);
-  if ((unsigned long)result <= -(unsigned long)SHMLBA)
-    result=raddr;
-  return result;
-}
diff --git a/mdk-stage1/dietlibc/lib/shmctl.c b/mdk-stage1/dietlibc/lib/shmctl.c
deleted file mode 100644
index 8f942f2a4..000000000
--- a/mdk-stage1/dietlibc/lib/shmctl.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int shmctl(int shmid, int cmd, struct shmid_ds *buf) {
-  return __ipc(SHMCTL,shmid,cmd,0,buf);
-}
diff --git a/mdk-stage1/dietlibc/lib/shmdt.c b/mdk-stage1/dietlibc/lib/shmdt.c
deleted file mode 100644
index 36db10f08..000000000
--- a/mdk-stage1/dietlibc/lib/shmdt.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int shmdt(const void* shmaddr) {
-  return __ipc(SHMDT,0,0,0,shmaddr);
-}
diff --git a/mdk-stage1/dietlibc/lib/shmget.c b/mdk-stage1/dietlibc/lib/shmget.c
deleted file mode 100644
index 9b03f5deb..000000000
--- a/mdk-stage1/dietlibc/lib/shmget.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int shmget(key_t key, int size, int shmflg) {
-  return __ipc(SHMGET,key,size,shmflg,0);
-}
diff --git a/mdk-stage1/dietlibc/lib/shutdown.c b/mdk-stage1/dietlibc/lib/shutdown.c
deleted file mode 100644
index 0a6be6c37..000000000
--- a/mdk-stage1/dietlibc/lib/shutdown.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_shutdown(int s, int how) {
-#ifdef __i386__
-  return socketcall(SYS_SHUTDOWN, (long*)&s);
-#else
-  unsigned long args[] = { s, (long) how, 0 };
-  return socketcall(SYS_SHUTDOWN, args);
-#endif
-}
-
-int shutdown(int s, int how) __attribute__((weak,alias("__libc_shutdown")));
diff --git a/mdk-stage1/dietlibc/lib/sigaddset.c b/mdk-stage1/dietlibc/lib/sigaddset.c
deleted file mode 100644
index 8ce69ea77..000000000
--- a/mdk-stage1/dietlibc/lib/sigaddset.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#define __KERNEL__
-#define sigaddset foobar
-#include <asm/signal.h>
-#undef sigaddset
-
-int __sigaddset(sigset_t *set, int signo) {
-  unsigned long sig = signo - 1;
-  if (_NSIG_WORDS == 1)
-    set->sig[0] |= 1UL << sig;
-  else
-    set->sig[sig / _NSIG_BPW] |= 1UL << (sig % _NSIG_BPW);
-  return 0;
-}
-
-int sigaddset (sigset_t *env, int signo) __attribute__((weak,alias("__sigaddset")));
diff --git a/mdk-stage1/dietlibc/lib/sigdelset.c b/mdk-stage1/dietlibc/lib/sigdelset.c
deleted file mode 100644
index 2c3385ea8..000000000
--- a/mdk-stage1/dietlibc/lib/sigdelset.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#define __KERNEL__
-#define sigdelset foobar
-#include <asm/signal.h>
-#undef sigdelset
-
-int __sigdelset(sigset_t *set, int signo) {
-  unsigned long sig = signo - 1;
-  if (_NSIG_WORDS == 1)
-    set->sig[0] &= ~(1UL << sig);
-  else
-    set->sig[sig / _NSIG_BPW] &= ~(1UL << (sig % _NSIG_BPW));
-  return 0;
-}
-
-int sigdelset (sigset_t *env, int signo) __attribute__((weak,alias("__sigdelset")));
diff --git a/mdk-stage1/dietlibc/lib/sigemptyset.c b/mdk-stage1/dietlibc/lib/sigemptyset.c
deleted file mode 100644
index f4532f96e..000000000
--- a/mdk-stage1/dietlibc/lib/sigemptyset.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#define __USE_EXTERN_INLINES 1
-#include <signal.h>
-#include <errno.h>
-#include <string.h>
-
-int sigemptyset(sigset_t *set) {
-  if (set==NULL) {
-    __set_errno(EINVAL);
-    return -1;
-  }
-  memset(set,0,sizeof(*set));
-  return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/sigfillset.c b/mdk-stage1/dietlibc/lib/sigfillset.c
deleted file mode 100644
index ddac6e391..000000000
--- a/mdk-stage1/dietlibc/lib/sigfillset.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#define __KERNEL__
-#include <asm/signal.h>
-
-int __sigfillset (sigset_t *set) {
-  int i;
-  for (i=0; i<_NSIG_WORDS; i++)
-    set->sig[i]=~0;
-  return 0;
-}
-
-int sigfillset(sigset_t *env) __attribute__((weak,alias("__sigfillset")));
diff --git a/mdk-stage1/dietlibc/lib/sigismember.c b/mdk-stage1/dietlibc/lib/sigismember.c
deleted file mode 100644
index 67a258884..000000000
--- a/mdk-stage1/dietlibc/lib/sigismember.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#define __USE_EXTERN_INLINES 1
-#include <signal.h>
-
-# define __sigmask(sig) \
-  (((unsigned long int) 1) << (((sig) - 1) % (8 * sizeof (unsigned long int))))
-
-# define __sigword(sig) (((sig) - 1) / (8 * sizeof (unsigned long int)))
-
-# define _SIGSET_NWORDS	(1024 / (8 * sizeof (unsigned long int)))
-typedef struct
-  {
-    unsigned long int __val[_SIGSET_NWORDS];
-  } __sigset_t;
-
-int __sigismember(const __sigset_t *set, int signo) {
-  unsigned long int __mask = __sigmask (signo);
-  unsigned long int __word = __sigword (signo);
-  return (set->__val[__word] & __mask);
-}
-
-int sigismember(const sigset_t *env, int signo) __attribute__((weak,alias("__sigismember")));
diff --git a/mdk-stage1/dietlibc/lib/sigjmp.c b/mdk-stage1/dietlibc/lib/sigjmp.c
deleted file mode 100644
index be97c62cc..000000000
--- a/mdk-stage1/dietlibc/lib/sigjmp.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Copyright (C) 1992, 1994, 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include <setjmp.h>
-#include <signal.h>
-#include <string.h>
-
-/* This function is called by the `sigsetjmp' macro
-   before doing a `__setjmp' on ENV[0].__jmpbuf.
-   Always return zero.  */
-
-int
-__sigjmp_save (sigjmp_buf env, int savemask)
-{
-  env[0].__mask_was_saved = (savemask &&
-			     sigprocmask (SIG_BLOCK, (sigset_t *) NULL,
-					    (sigset_t*)&env[0].__saved_mask) == 0);
-
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/sleep.c b/mdk-stage1/dietlibc/lib/sleep.c
deleted file mode 100644
index ec5b99533..000000000
--- a/mdk-stage1/dietlibc/lib/sleep.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <linux/time.h>
-#include <time.h>
-
-unsigned int sleep(unsigned int secs) {
-  struct timespec t;
-  t.tv_sec=secs;
-  t.tv_nsec=0;
-  nanosleep(&t,&t);
-  return secs-t.tv_sec;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/snprintf.c b/mdk-stage1/dietlibc/lib/snprintf.c
deleted file mode 100644
index 096c06115..000000000
--- a/mdk-stage1/dietlibc/lib/snprintf.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <stdarg.h>
-#include <sys/types.h>
-
-int vsnprintf (char *str,size_t size,const char *format, va_list arg_ptr);
-
-int snprintf(char *str,size_t size,const char *format,...)
-{
-  int n;
-  va_list arg_ptr;
-  va_start(arg_ptr, format);
-  n=vsnprintf(str,size,format,arg_ptr);
-  va_end (arg_ptr);
-  return n;
-}
diff --git a/mdk-stage1/dietlibc/lib/socket.c b/mdk-stage1/dietlibc/lib/socket.c
deleted file mode 100644
index 1684a6a2b..000000000
--- a/mdk-stage1/dietlibc/lib/socket.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int socket(int a, int b, int c) {
-#ifdef __i386__
-  return socketcall(SYS_SOCKET, (long*)&a);
-#else
-  unsigned long args[] = { a, b, c };
-  return socketcall(SYS_SOCKET, args);
-#endif
-}
diff --git a/mdk-stage1/dietlibc/lib/speed.c b/mdk-stage1/dietlibc/lib/speed.c
deleted file mode 100644
index a7fcca7c9..000000000
--- a/mdk-stage1/dietlibc/lib/speed.c
+++ /dev/null
@@ -1,67 +0,0 @@
-#include <unistd.h>
-#include <termios.h>
-#include <sys/types.h>
-
-#include <asm/errno.h>
-
-extern int errno;
-
-/* Hack around a kernel bug; value must correspond to the one used in tcsetattr.c */
-#define IBAUD0	020000000000
-
-
-/* Return the output baud rate stored in *TERMIOS_P.  */
-speed_t cfgetospeed (struct termios *termios_p)
-{
-	return termios_p->c_cflag & (CBAUD | CBAUDEX);
-}
-
-
-/* Return the input baud rate stored in *TERMIOS_P.
-   Although for Linux there is no difference between input and output
-   speed, the numerical 0 is a special case for the input baud rate. It
-   should set the input baud rate to the output baud rate. */
-speed_t cfgetispeed (struct termios *termios_p)
-{
-	return ((termios_p->c_iflag & IBAUD0)
-		? 0 : termios_p->c_cflag & (CBAUD | CBAUDEX));
-}
-
-
-/* Set the output baud rate stored in *TERMIOS_P to SPEED.  */
-int cfsetospeed (struct termios *termios_p, speed_t speed)
-{
-	if ((speed & ~CBAUD) != 0 && (speed < B57600 || speed > B460800)) {
-		errno = EINVAL;
-		return -1;
-	}
-	
-	termios_p->c_cflag &= ~(CBAUD | CBAUDEX);
-	termios_p->c_cflag |= speed;
-	
-	return 0;
-}
-
-
-/* Set the input baud rate stored in *TERMIOS_P to SPEED.
-   Although for Linux there is no difference between input and output
-   speed, the numerical 0 is a special case for the input baud rate.  It
-   should set the input baud rate to the output baud rate.  */
-int cfsetispeed (struct termios *termios_p, speed_t speed)
-{
-	if ((speed & ~CBAUD) != 0 && (speed < B57600 || speed > B460800)) {
-		errno = EINVAL;
-		return -1;
-	}
-	
-	if (speed == 0)
-		termios_p->c_iflag |= IBAUD0;
-	else
-	{
-		termios_p->c_iflag &= ~IBAUD0;
-		termios_p->c_cflag &= ~(CBAUD | CBAUDEX);
-		termios_p->c_cflag |= speed;
-	}
-	
-	return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/sprintf.c b/mdk-stage1/dietlibc/lib/sprintf.c
deleted file mode 100644
index b355d01f9..000000000
--- a/mdk-stage1/dietlibc/lib/sprintf.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <stdarg.h>
-#include <linux/types.h>
-#include <stdlib.h>
-#include "dietwarning.h"
-
-int vsnprintf (char *str,size_t size,const char *format, va_list arg_ptr);
-
-int sprintf(char *dest,const char *format,...)
-{
-  int n;
-  va_list arg_ptr;
-  va_start(arg_ptr, format);
-  n=vsnprintf(dest,1000000,format,arg_ptr);
-  va_end (arg_ptr);
-  return n;
-}
-
-link_warning("sprintf","warning: Avoid sprintf; use snprintf.  It is more secure and faster.")
diff --git a/mdk-stage1/dietlibc/lib/sscanf.c b/mdk-stage1/dietlibc/lib/sscanf.c
deleted file mode 100644
index 341e74bba..000000000
--- a/mdk-stage1/dietlibc/lib/sscanf.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <stdarg.h>
-
-int vsscanf(const char *str, const char *format, va_list arg_ptr);
-
-int sscanf(const char *str, const char *format, ...)
-{
-  int n;
-  va_list arg_ptr;
-  va_start(arg_ptr, format);
-  n=vsscanf(str,format,arg_ptr);
-  va_end (arg_ptr);
-  return n;
-}
diff --git a/mdk-stage1/dietlibc/lib/strcasecmp.c b/mdk-stage1/dietlibc/lib/strcasecmp.c
deleted file mode 100644
index d978488a4..000000000
--- a/mdk-stage1/dietlibc/lib/strcasecmp.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <ctype.h>
-#include "dietfeatures.h"
-
-int strcasecmp(register const char *s,register const char *t) {
-  register char x;
-
-  for (;;) {
-    x = tolower(*s); if (x != tolower(*t)) break; if (!x) break; ++s; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
-    x = tolower(*s); if (x != tolower(*t)) break; if (!x) break; ++s; ++t;
-    x = tolower(*s); if (x != tolower(*t)) break; if (!x) break; ++s; ++t;
-    x = tolower(*s); if (x != tolower(*t)) break; if (!x) break; ++s; ++t;
-#endif
-  }
-  return ((int)(unsigned int)(unsigned char) x)
-       - ((int)(unsigned int)(unsigned char) *t);
-}
diff --git a/mdk-stage1/dietlibc/lib/strcat.c b/mdk-stage1/dietlibc/lib/strcat.c
deleted file mode 100644
index 8a755afea..000000000
--- a/mdk-stage1/dietlibc/lib/strcat.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include "dietfeatures.h"
-#include <string.h>
-
-char* strcat(register char* s,register const char* t)
-{
-  char *dest=s;
-  s+=strlen(s);
-  for (;;) {
-    if (!(*s = *t)) break; ++s; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
-    if (!(*s = *t)) break; ++s; ++t;
-    if (!(*s = *t)) break; ++s; ++t;
-    if (!(*s = *t)) break; ++s; ++t;
-#endif
-  }
-  return dest;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/strchr.c b/mdk-stage1/dietlibc/lib/strchr.c
deleted file mode 100644
index 0c2050da6..000000000
--- a/mdk-stage1/dietlibc/lib/strchr.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include "dietfeatures.h"
-
-char *strchr(register const char *t, int c) {
-  register char ch;
-
-  ch = c;
-  for (;;) {
-    if (*t == ch) break; if (!*t) return 0; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
-    if (*t == ch) break; if (!*t) return 0; ++t;
-    if (*t == ch) break; if (!*t) return 0; ++t;
-    if (*t == ch) break; if (!*t) return 0; ++t;
-#endif
-  }
-  return (char*)t;
-}
-
-char *index(char *t,int c)	__attribute__((weak,alias("strchr")));
diff --git a/mdk-stage1/dietlibc/lib/strcmp.c b/mdk-stage1/dietlibc/lib/strcmp.c
deleted file mode 100644
index 0db324e66..000000000
--- a/mdk-stage1/dietlibc/lib/strcmp.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include "dietfeatures.h"
-
-int strcmp(register const char *s,register const char *t) {
-  register char x;
-
-  for (;;) {
-    x = *s; if (x != *t) break; if (!x) break; ++s; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
-    x = *s; if (x != *t) break; if (!x) break; ++s; ++t;
-    x = *s; if (x != *t) break; if (!x) break; ++s; ++t;
-    x = *s; if (x != *t) break; if (!x) break; ++s; ++t;
-#endif
-  }
-  return ((int)(unsigned int)(unsigned char) x)
-       - ((int)(unsigned int)(unsigned char) *t);
-}
diff --git a/mdk-stage1/dietlibc/lib/strcpy.c b/mdk-stage1/dietlibc/lib/strcpy.c
deleted file mode 100644
index 49693c30d..000000000
--- a/mdk-stage1/dietlibc/lib/strcpy.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include "dietfeatures.h"
-
-char* strcpy(register char* s,register const char* t)
-{
-  char *dest=s;
-  for (;;) {
-    if (!(*s = *t)) return dest; ++s; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
-    if (!(*s = *t)) return dest; ++s; ++t;
-    if (!(*s = *t)) return dest; ++s; ++t;
-    if (!(*s = *t)) return dest; ++s; ++t;
-#endif
-  }
-}
-
diff --git a/mdk-stage1/dietlibc/lib/strcspn.c b/mdk-stage1/dietlibc/lib/strcspn.c
deleted file mode 100644
index 37053c72c..000000000
--- a/mdk-stage1/dietlibc/lib/strcspn.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <sys/types.h>
-#include <string.h>
-
-size_t strcspn(const char *s, const char *reject)
-{
-  size_t l=0;
-  int a=1,i,al=strlen(reject);
-
-  while((a)&&(*s))
-  {
-    for(i=0;(a)&&(i<al);i++)
-      if (*s==reject[i]) a=0;
-    if (a) l++;
-    s++;
-  }
-  return l;
-}
diff --git a/mdk-stage1/dietlibc/lib/strdup.c b/mdk-stage1/dietlibc/lib/strdup.c
deleted file mode 100644
index 6a2ea5f95..000000000
--- a/mdk-stage1/dietlibc/lib/strdup.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <string.h>
-#include <stdlib.h>
-
-char *strdup(const char *s) {
-  char *tmp=(char *)malloc(strlen(s)+1);
-  if (!tmp) return 0;
-  strcpy(tmp,s);
-  return tmp;
-}
diff --git a/mdk-stage1/dietlibc/lib/strerror.c b/mdk-stage1/dietlibc/lib/strerror.c
deleted file mode 100644
index f15b86aae..000000000
--- a/mdk-stage1/dietlibc/lib/strerror.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <string.h>
-
-extern char *sys_errlist[];
-extern int sys_nerr;
-
-char *strerror(int errnum) {
-  if (errnum>=0 && errnum<sys_nerr)
-    return sys_errlist[errnum];
-  return "[unknown error]";
-}
diff --git a/mdk-stage1/dietlibc/lib/strlcat.c b/mdk-stage1/dietlibc/lib/strlcat.c
deleted file mode 100644
index fd35ec8af..000000000
--- a/mdk-stage1/dietlibc/lib/strlcat.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*	$OpenBSD: strlcat.c,v 1.2 1999/06/17 16:28:58 millert Exp $	*/
-
-/*
- * Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char *rcsid = "$OpenBSD: strlcat.c,v 1.2 1999/06/17 16:28:58 millert Exp $";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/types.h>
-#include <string.h>
-
-/*
- * Appends src to string dst of size siz (unlike strncat, siz is the
- * full size of dst, not space left).  At most siz-1 characters
- * will be copied.  Always NUL terminates (unless siz == 0).
- * Returns strlen(initial dst) + strlen(src); if retval >= siz,
- * truncation occurred.
- */
-size_t strlcat(dst, src, siz)
-	char *dst;
-	const char *src;
-	size_t siz;
-{
-	register char *d = dst;
-	register const char *s = src;
-	register size_t n = siz;
-	size_t dlen;
-
-	/* Find the end of dst and adjust bytes left but don't go past end */
-	while (*d != '\0' && n-- != 0)
-		d++;
-	dlen = d - dst;
-	n = siz - dlen;
-
-	if (n == 0)
-		return(dlen + strlen(s));
-	while (*s != '\0') {
-		if (n != 1) {
-			*d++ = *s;
-			n--;
-		}
-		s++;
-	}
-	*d = '\0';
-
-	return(dlen + (s - src));	/* count does not include NUL */
-}
diff --git a/mdk-stage1/dietlibc/lib/strlcpy.3 b/mdk-stage1/dietlibc/lib/strlcpy.3
deleted file mode 100644
index e00af8d6b..000000000
--- a/mdk-stage1/dietlibc/lib/strlcpy.3
+++ /dev/null
@@ -1,169 +0,0 @@
-.\" $OpenBSD: strlcpy.3,v 1.10 2000/11/06 01:03:25 aaron Exp $
-.\"
-.\" Copyright (c) 1998, 2000 Todd C. Miller <Todd.Miller@courtesan.com>
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. The name of the author may not be used to endorse or promote products
-.\"    derived from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
-.\" INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
-.\" AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL
-.\" THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-.\" EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-.\" PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-.\" OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-.\" WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-.\" OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-.\" ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.Dd June 22, 1998
-.Dt STRLCPY 3
-.Os
-.Sh NAME
-.Nm strlcpy ,
-.Nm strlcat
-.Nd size-bounded string copying and concatenation
-.Sh SYNOPSIS
-.Fd #include <string.h>
-.Ft size_t
-.Fn strlcpy "char *dst" "const char *src" "size_t size"
-.Ft size_t
-.Fn strlcat "char *dst" "const char *src" "size_t size"
-.Sh DESCRIPTION
-The
-.Fn strlcpy
-and
-.Fn strlcat
-functions copy and concatenate strings respectively.
-They are designed
-to be safer, more consistent, and less error prone replacements for
-.Xr strncpy 3
-and
-.Xr strncat 3 .
-Unlike those functions,
-.Fn strlcpy
-and
-.Fn strlcat
-take the full size of the buffer (not just the length) and guarantee to
-NUL-terminate the result (as long as
-.Fa size
-is larger than 0 or, in the case of
-.Fn strlcat ,
-as long as there is at least one byte free in
-.Fa dst ) .
-Note that you should include a byte for the NUL in
-.Fa size .
-Also note that
-.Fn strlcpy  
-and
-.Fn strlcat
-only operate on true
-.Dq C
-strings.
-This means that for
-.Fn strlcpy
-.Fa src
-must be NUL-terminated and for
-.Fn strlcat
-both
-.Fa src
-and
-.Fa dst
-must be NUL-terminated.
-.Pp
-The
-.Fn strlcpy
-function copies up to
-.Fa size
-- 1 characters from the NUL-terminated string
-.Fa src
-to
-.Fa dst ,
-NUL-terminating the result.
-.Pp
-The
-.Fn strlcat
-function appends the NUL-terminated string
-.Fa src
-to the end of
-.Fa dst .
-It will append at most
-.Fa size
-- strlen(dst) - 1 bytes, NUL-terminating the result.
-.Sh RETURN VALUES
-The
-.Fn strlcpy
-and
-.Fn strlcat
-functions return the total length of the string they tried to create.
-For
-.Fn strlcpy
-that means the length of
-.Fa src .
-For
-.Fn strlcat
-that means the initial length of
-.Fa dst
-plus
-the length of
-.Fa src .
-While this may seem somewhat confusing it was done to make
-truncation detection simple.
-.Sh EXAMPLES
-The following code fragment illustrates the simple case:
-.Bd -literal -offset indent
-char *s, *p, buf[BUFSIZ];
-
-\&...
-
-(void)strlcpy(buf, s, sizeof(buf));
-(void)strlcat(buf, p, sizeof(buf));
-.Ed
-.Pp
-To detect truncation, perhaps while building a pathname, something
-like the following might be used:
-.Bd -literal -offset indent
-char *dir, *file, pname[MAXPATHLEN];
-
-\&...
-
-if (strlcpy(pname, dir, sizeof(pname)) >= sizeof(pname))
-	goto toolong;
-if (strlcat(pname, file, sizeof(pname)) >= sizeof(pname))
-	goto toolong;
-.Ed
-.Pp
-Since we know how many characters we copied the first time, we can
-speed things up a bit by using a copy instead of an append:
-.Bd -literal -offset indent
-char *dir, *file, pname[MAXPATHLEN];
-size_t n;
-
-\&...
-
-n = strlcpy(pname, dir, sizeof(pname));
-if (n >= sizeof(pname))
-	goto toolong;
-if (strlcpy(pname + n, file, sizeof(pname) - n) >= sizeof(pname) - n)
-	goto toolong;
-.Ed
-.Pp
-However, one may question the validity of such optimizations, as they
-defeat the whole purpose of
-.Fn strlcpy
-and
-.Fn strlcat .
-As a matter of fact, the first version of this manual page got it wrong.
-.Sh SEE ALSO
-.Xr snprintf 3 ,
-.Xr strncat 3 ,
-.Xr strncpy 3
diff --git a/mdk-stage1/dietlibc/lib/strlcpy.c b/mdk-stage1/dietlibc/lib/strlcpy.c
deleted file mode 100644
index b935b9527..000000000
--- a/mdk-stage1/dietlibc/lib/strlcpy.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*	$OpenBSD: strlcpy.c,v 1.3 1999/04/24 01:17:37 millert Exp $	*/
-
-/*
- * Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char *rcsid = "$OpenBSD: strlcpy.c,v 1.3 1999/04/24 01:17:37 millert Exp $";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/types.h>
-#include <string.h>
-
-/*
- * Copy src to string dst of size siz.  At most siz-1 characters
- * will be copied.  Always NUL terminates (unless siz == 0).
- * Returns strlen(src); if retval >= siz, truncation occurred.
- */
-size_t strlcpy(dst, src, siz)
-	char *dst;
-	const char *src;
-	size_t siz;
-{
-	register char *d = dst;
-	register const char *s = src;
-	register size_t n = siz;
-
-	/* Copy as many bytes as will fit */
-	if (n != 0 && --n != 0) {
-		do {
-			if ((*d++ = *s++) == 0)
-				break;
-		} while (--n != 0);
-	}
-
-	/* Not enough room in dst, add NUL and traverse rest of src */
-	if (n == 0) {
-		if (siz != 0)
-			*d = '\0';		/* NUL-terminate dst */
-		while (*s++)
-			;
-	}
-
-	return(s - src - 1);	/* count does not include NUL */
-}
diff --git a/mdk-stage1/dietlibc/lib/strlen.c b/mdk-stage1/dietlibc/lib/strlen.c
deleted file mode 100644
index 56c085dac..000000000
--- a/mdk-stage1/dietlibc/lib/strlen.c
+++ /dev/null
@@ -1,47 +0,0 @@
-#include <endian.h>
-#include "dietfeatures.h"
-#include <string.h>
-
-#ifdef WANT_SMALL_STRING_ROUTINES
-size_t strlen(const char *s) {
-  register int i;
-  if (!s) return 0;
-  for (i=0; *s; ++s) ++i;
-  return i;
-}
-#else
-static const unsigned long magic = 0x01010101;
-
-size_t strlen(const char *s)
-{
-  const char *t = s;
-  unsigned long word;
-
-  if (!s) return 0;
-
-  /* Byte compare up until word boundary */
-  for (; ((unsigned long) t & 3); t++)
-    if (!*t) return t - s;
-
-  /* Word compare */
-  do {
-    word = *((unsigned long *) t); t += 4;
-    word = (word - magic) &~ word;
-    word &= (magic << 7);
-  } while (word == 0);
-
-#if BYTE_ORDER == LITTLE_ENDIAN
-  /* word & 0x80808080 == word */
-  word = (word - 1) & (magic << 10);
-  word += (word << 8) + (word << 16);
-  t += word >> 26;
-#else
-  if ((word & 0x80800000) == 0) {
-    word <<= 16;
-    t += 2;
-  }
-  if ((word & 0x80000000) == 0) t += 1;
-#endif
-  return ((const char *) t) - 4 - s;
-}
-#endif
diff --git a/mdk-stage1/dietlibc/lib/strncasecmp.c b/mdk-stage1/dietlibc/lib/strncasecmp.c
deleted file mode 100644
index 8a5445e53..000000000
--- a/mdk-stage1/dietlibc/lib/strncasecmp.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <ctype.h>
-#include <sys/types.h>
-#include <string.h>
-
-int strncasecmp(const char *s, const char *t, size_t n) {
-  register char x;
-  register const char* u=s+n;
-  for (;;) {
-    x = tolower(*s); if (x!=tolower(*t)) break; if (!x) break; if (++s>=u) return 0; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
-    x = tolower(*s); if (x!=tolower(*t)) break; if (!x) break; if (++s>=u) return 0; ++t;
-    x = tolower(*s); if (x!=tolower(*t)) break; if (!x) break; if (++s>=u) return 0; ++t;
-    x = tolower(*s); if (x!=tolower(*t)) break; if (!x) break; if (++s>=u) return 0; ++t;
-#endif
-  }
-  return ((int)(unsigned int)(unsigned char) x)
-       - ((int)(unsigned int)(unsigned char) *t);
-}
diff --git a/mdk-stage1/dietlibc/lib/strncat.c b/mdk-stage1/dietlibc/lib/strncat.c
deleted file mode 100644
index a08e97916..000000000
--- a/mdk-stage1/dietlibc/lib/strncat.c
+++ /dev/null
@@ -1,31 +0,0 @@
-#include "dietfeatures.h"
-#include <string.h>
-
-#ifdef WANT_NON_COMPLIANT_STRNCAT
-/* this implementation is not standards compliant.
- * the standard says that strncat(dest,"foobar",3) should write 'f', 'o'
- * and 'o'.  The programmer is then expected to overwrite the last byte
- * with '\0', which is often forgotten.  This implementation makes sure
- * the last written bytes is always '\0'. */
-#endif
-
-char *strncat(char *s, const char *t, size_t n) {
-  char *dest=s;
-  register char *max;
-  s+=strlen(s);
-#ifdef WANT_NON_COMPLIANT_STRNCAT
-  max=s+n-1;
-#else
-  max=s+n;
-#endif
-  for (;;) {
-    if (!(*s = *t)) break; if (++s==max) break; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
-    if (!(*s = *t)) break; if (++s==max) break; ++t;
-    if (!(*s = *t)) break; if (++s==max) break; ++t;
-    if (!(*s = *t)) break; if (++s==max) break; ++t;
-#endif
-  }
-  *s=0;
-  return dest;
-}
diff --git a/mdk-stage1/dietlibc/lib/strncmp.c b/mdk-stage1/dietlibc/lib/strncmp.c
deleted file mode 100644
index 7c08c0fa7..000000000
--- a/mdk-stage1/dietlibc/lib/strncmp.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <sys/types.h>
-#include <string.h>
-
-int strncmp(const char *s1, const char *s2, size_t n) {
-  return memccmp(s1,s2,0,n);
-}
diff --git a/mdk-stage1/dietlibc/lib/strncpy.c b/mdk-stage1/dietlibc/lib/strncpy.c
deleted file mode 100644
index 531387b7f..000000000
--- a/mdk-stage1/dietlibc/lib/strncpy.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#define _POSIX_SOURCE
-#define _XOPEN_SOURCE
-#include <sys/types.h>
-#include <string.h>
-
-char *strncpy(char *dest, const char *src, size_t n)
-{
-  memccpy(dest,src,0,n);
-  return dest;
-}
diff --git a/mdk-stage1/dietlibc/lib/strpbrk.c b/mdk-stage1/dietlibc/lib/strpbrk.c
deleted file mode 100644
index e18fd2a2d..000000000
--- a/mdk-stage1/dietlibc/lib/strpbrk.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <sys/types.h>
-#include <string.h>
-
-char *strpbrk(const char *s, const char *accept) {
-  register int i,l=strlen(accept);
-  for (; *s; s++)
-    for (i=0; i<l; i++)
-      if (*s == accept[i])
-	return (char*)s;
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/strrchr.c b/mdk-stage1/dietlibc/lib/strrchr.c
deleted file mode 100644
index 1abb655e2..000000000
--- a/mdk-stage1/dietlibc/lib/strrchr.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <string.h>
-#include "dietfeatures.h"
-
-char *strrchr(const char *t, int c) {
-  register char ch;
-  register const char *l=0;
-
-  ch = c;
-  for (;;) {
-    if (*t == ch) l=t; if (!*t) return (char*)l; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
-    if (*t == ch) l=t; if (!*t) return (char*)l; ++t;
-    if (*t == ch) l=t; if (!*t) return (char*)l; ++t;
-    if (*t == ch) l=t; if (!*t) return (char*)l; ++t;
-#endif
-  }
-  return (char*)l;
-}
-
-char *rindex(const char *t,int c)	__attribute__((weak,alias("strrchr")));
diff --git a/mdk-stage1/dietlibc/lib/strsep.c b/mdk-stage1/dietlibc/lib/strsep.c
deleted file mode 100644
index a1bf1872a..000000000
--- a/mdk-stage1/dietlibc/lib/strsep.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <string.h>
-
-char *strsep(char **stringp, const char *delim) {
-  register char *tmp=*stringp;
-  register char *tmp2=tmp;
-  register const char *tmp3;
-  for (tmp2=tmp; *tmp2; ++tmp2) {
-    for (tmp3=delim; *tmp3; ++tmp3)
-      if (*tmp2==*tmp3) {	/* delimiter found */
-	*tmp2=0;
-	*stringp=tmp2+1;
-	return tmp;
-      }
-  }
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/strspn.c b/mdk-stage1/dietlibc/lib/strspn.c
deleted file mode 100644
index 2b3a4c116..000000000
--- a/mdk-stage1/dietlibc/lib/strspn.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <sys/types.h>
-#include <string.h>
-
-size_t strspn(const char *s, const char *accept)
-{
-  size_t l=0;
-  int a=1,i,al=strlen(accept);
-
-  while((a)&&(*s))
-  {
-    for(a=i=0;(!a)&&(i<al);i++)
-      if (*s==accept[i]) a=1;
-    if (a) l++;
-    s++;
-  }
-  return l;
-}
diff --git a/mdk-stage1/dietlibc/lib/strstr.c b/mdk-stage1/dietlibc/lib/strstr.c
deleted file mode 100644
index 641d9d7ac..000000000
--- a/mdk-stage1/dietlibc/lib/strstr.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <sys/types.h>
-#include <string.h>
-
-char *strstr(const char *haystack, const char *needle) {
-  int nl=strlen(needle);
-  int hl=strlen(haystack);
-  int i;
-  if (nl>hl) return 0;
-  for (i=hl-nl+1; i; --i) {
-    if (!memcmp(haystack,needle,nl))
-      return (char*)haystack;
-    ++haystack;
-  }
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/strtod.c b/mdk-stage1/dietlibc/lib/strtod.c
deleted file mode 100644
index cbe983d84..000000000
--- a/mdk-stage1/dietlibc/lib/strtod.c
+++ /dev/null
@@ -1,52 +0,0 @@
-#include <string.h>
-
-extern char isspace(char c);
-
-#ifdef __GNUC__
-static inline char isdigit(char c) { return (c>='0' && c<='9'); }
-#endif
-
-double strtod(const char *nptr, char **endptr) {
-  double d=0;
-  register const char *c=nptr;
-  char neg=0;
-  while (*c && isspace(*c)) ++c;
-  switch (*c) {
-  case '-': neg=1;
-  case '+': c++; break;
-  default: break;
-  }
-  while (isdigit(*c)) {
-    d=d*10+(*c-'0');
-    ++c;
-  }
-  if (*c=='.') {
-    double factor=.1;
-    while (isdigit(*++c)) {
-      d=d+(factor*(*c-'0'));
-      factor/=10;
-    }
-  }
-  if ((*c|32)=='e') {
-    int exp=0;
-    double factor=10;
-    if (c[1]<'0') {
-      switch (c[1]) {
-      case '-': factor=0.1;
-      case '+': c++; break;
-      default:
-	d=0;
-	c=nptr;
-	goto done;
-      }
-    }
-    while (isdigit(*++c))
-      exp=exp*10+(*c-'0');
-    while (exp) {	/* XXX: this introduces rounding errors */
-      d*=factor; --exp;
-    }
-  }
-done:
-  if (endptr) *endptr=(char*)c;
-  return d;
-}
diff --git a/mdk-stage1/dietlibc/lib/strtok.c b/mdk-stage1/dietlibc/lib/strtok.c
deleted file mode 100644
index 86337da7b..000000000
--- a/mdk-stage1/dietlibc/lib/strtok.c
+++ /dev/null
@@ -1,8 +0,0 @@
-char *strtok_r(char *s, const char *delim, char **ptrptr);
-
-static char *strtok_pos;
-
-char *strtok(char *s, const char *delim)
-{
-  return strtok_r(s,delim,&strtok_pos);
-}
diff --git a/mdk-stage1/dietlibc/lib/strtok_r.c b/mdk-stage1/dietlibc/lib/strtok_r.c
deleted file mode 100644
index 93f9401de..000000000
--- a/mdk-stage1/dietlibc/lib/strtok_r.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <string.h>
-
-char *strtok_r(char *s, const char *delim, char **ptrptr)
-{
-  int i;
-  char *tmp=0;
-
-  if (s) (*ptrptr)=s;
-
-  if (**ptrptr)
-  {
-    while(!(i=strcspn(*ptrptr,delim))) (*ptrptr)++;
-    if (**ptrptr)
-    {
-      tmp=(*ptrptr);
-      (*ptrptr)+=i;
-      if (**ptrptr) *(*ptrptr)++=0;
-    }
-  }
-  return tmp;
-}
diff --git a/mdk-stage1/dietlibc/lib/strtol.c b/mdk-stage1/dietlibc/lib/strtol.c
deleted file mode 100644
index ead89f408..000000000
--- a/mdk-stage1/dietlibc/lib/strtol.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <ctype.h>
-
-extern unsigned long int strtoul(const char *nptr, char **endptr, int base);
-
-long int strtol(const char *nptr, char **endptr, int base)
-{
-  int neg=0;
-  unsigned long int v;
-
-  while(isspace(*nptr)) nptr++;
-
-  if (*nptr == '-' && isdigit(nptr[1])) { neg=-1; nptr++; }
-  v=strtoul(nptr,endptr,base);
-  return (neg?-v:v);
-}
diff --git a/mdk-stage1/dietlibc/lib/strtoll.c b/mdk-stage1/dietlibc/lib/strtoll.c
deleted file mode 100644
index 7b8e28a1d..000000000
--- a/mdk-stage1/dietlibc/lib/strtoll.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <ctype.h>
-
-extern unsigned long int strtoull(const char *nptr, char **endptr, int base);
-
-long int strtoll(const char *nptr, char **endptr, int base)
-{
-  int neg=0;
-  unsigned long long int v;
-
-  while(isspace(*nptr)) nptr++;
-
-  if (*nptr == '-' && isdigit(nptr[1])) { neg=-1; nptr++; }
-  v=strtoull(nptr,endptr,base);
-  return (neg?-v:v);
-}
diff --git a/mdk-stage1/dietlibc/lib/strtoul.c b/mdk-stage1/dietlibc/lib/strtoul.c
deleted file mode 100644
index 3f93962a9..000000000
--- a/mdk-stage1/dietlibc/lib/strtoul.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#include <ctype.h>
-
-/* static char *num="0123456789abcdefghijklmnopqrstuvwxyz"; */
-
-unsigned long int strtoul(const char *nptr, char **endptr, int base)
-{
-  long int v=0;
-
-  while(isspace(*nptr)) ++nptr;
-
-  if (*nptr == '+') ++nptr;
-  if (!base) {
-    if (*nptr=='0') {
-      base=8;
-      if ((*(nptr+1)=='x')||(*(nptr+1)=='X')) {
-	nptr+=2;
-	base=16;
-      }
-    }
-    else
-      base=10;
-  }
-  while(*nptr) {
-    register unsigned char c=*nptr;
-    c=(c>='a'?c-'a'+10:c>='A'?c-'A'+10:c-'0');
-    if (c>=base) break;
-    v=v*base+c;
-    ++nptr;
-  }
-  if (endptr) *endptr=(char *)nptr;
-  return v;
-}
diff --git a/mdk-stage1/dietlibc/lib/strtoull.c b/mdk-stage1/dietlibc/lib/strtoull.c
deleted file mode 100644
index 40818958d..000000000
--- a/mdk-stage1/dietlibc/lib/strtoull.c
+++ /dev/null
@@ -1,30 +0,0 @@
-#include <ctype.h>
-
-unsigned long long int strtoull(const char *nptr, char **endptr, int base)
-{
-  long long int v=0;
-
-  while(isspace(*nptr)) ++nptr;
-
-  if (*nptr == '+') ++nptr;
-  if (!base) {
-    if (*nptr=='0') {
-      base=8;
-      if ((*(nptr+1)=='x')||(*(nptr+1)=='X')) {
-	nptr+=2;
-	base=16;
-      }
-    }
-    else
-      base=10;
-  }
-  while(*nptr) {
-    register unsigned char c=*nptr;
-    c=(c>='a'?c-'a'+10:c>='A'?c-'A'+10:c-'0');
-    if (c>=base) break;
-    v=v*base+c;
-    ++nptr;
-  }
-  if (endptr) *endptr=(char *)nptr;
-  return v;
-}
diff --git a/mdk-stage1/dietlibc/lib/sys_siglist.c b/mdk-stage1/dietlibc/lib/sys_siglist.c
deleted file mode 100644
index 80d7b3fb0..000000000
--- a/mdk-stage1/dietlibc/lib/sys_siglist.c
+++ /dev/null
@@ -1,37 +0,0 @@
-const char *const sys_siglist[] =
-  {
-    "Signal 0",
-    "Hangup",
-    "Interrupt",
-    "Quit",
-    "Illegal instruction",
-    "Trace/breakpoint trap",
-    "IOT trap",
-    "EMT trap",
-    "Floating point exception",
-    "Killed",
-    "Bus error",
-    "Segmentation fault",
-    "Bad system call",
-    "Broken pipe",
-    "Alarm clock",
-    "Terminated",
-    "Urgent I/O condition",
-    "Stopped (signal)",
-    "Stopped",
-    "Continued",
-    "Child exited",
-    "Stopped (tty input)",
-    "Stopped (tty output)",
-    "I/O possible",
-    "CPU time limit exceeded",
-    "File size limit exceeded",
-    "Virtual timer expired",
-    "Profiling timer expired",
-    "Window changed",
-    "Resource lost",
-    "User defined signal 1",
-    "User defined signal 2",
-    0
-  };
-
diff --git a/mdk-stage1/dietlibc/lib/tcdrain.c b/mdk-stage1/dietlibc/lib/tcdrain.c
deleted file mode 100644
index 7a760f643..000000000
--- a/mdk-stage1/dietlibc/lib/tcdrain.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <sys/ioctl.h>
-
-int __libc_tcdrain(int fd)
-{
-  return ioctl(fd, TCSBRK, 1);
-}
-
-int tcdrain(int fd) __attribute__((weak,alias("__libc_tcdrain")));
diff --git a/mdk-stage1/dietlibc/lib/tcflush.c b/mdk-stage1/dietlibc/lib/tcflush.c
deleted file mode 100644
index a19fe11d1..000000000
--- a/mdk-stage1/dietlibc/lib/tcflush.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <unistd.h>
-#include <termios.h>
-#include <sys/ioctl.h>
-
-#include <asm/errno.h>
-
-extern int errno;
-
-/* Flush pending data on FD.  */
-int tcflush(int fd, int queue_selector)
-{
-	switch (queue_selector) {
-	case TCIFLUSH:
-		return ioctl(fd, TCFLSH, 0);
-	case TCOFLUSH:
-		return ioctl(fd, TCFLSH, 1);
-	case TCIOFLUSH:
-		return ioctl(fd, TCFLSH, 2);
-	default:
-		errno = EINVAL;
-		return -1;
-	}
-}
diff --git a/mdk-stage1/dietlibc/lib/tcgetattr.c b/mdk-stage1/dietlibc/lib/tcgetattr.c
deleted file mode 100644
index f35d39442..000000000
--- a/mdk-stage1/dietlibc/lib/tcgetattr.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <termios.h>
-#include <sys/ioctl.h>
-
-int tcgetattr(int fildes, struct termios *termios_p)
-{
-  return ioctl(fildes, TCGETS, termios_p);
-}
diff --git a/mdk-stage1/dietlibc/lib/tcgetpgrp.c b/mdk-stage1/dietlibc/lib/tcgetpgrp.c
deleted file mode 100644
index f2a290651..000000000
--- a/mdk-stage1/dietlibc/lib/tcgetpgrp.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <termios.h>
-#include <sys/ioctl.h>
-
-int tcgetpgrp(int fildes)
-{
-  return ioctl(fildes, TIOCGPGRP);
-}
diff --git a/mdk-stage1/dietlibc/lib/tcsetattr.c b/mdk-stage1/dietlibc/lib/tcsetattr.c
deleted file mode 100644
index cf70354d2..000000000
--- a/mdk-stage1/dietlibc/lib/tcsetattr.c
+++ /dev/null
@@ -1,27 +0,0 @@
-#define tcsetattr libc_tcsetattr
-#include <termios.h>
-#include <sys/ioctl.h>
-#undef tcsetattr
-
-#include <asm/errno.h>
-
-extern int errno;
-
-/* Hack around a kernel bug; value must correspond to the one used in speed.c */
-#define IBAUD0	020000000000
-
-int tcsetattr(int fildes, int optional_actions, struct termios *termios_p)
-{
-  termios_p->c_iflag &= ~IBAUD0;
-  switch (optional_actions) {
-  case TCSANOW:
-    return ioctl(fildes, TCSETS, termios_p);
-  case TCSADRAIN:
-    return ioctl(fildes, TCSETSW, termios_p);
-  case TCSAFLUSH:
-    return ioctl(fildes, TCSETSF, termios_p);
-  default:
-    errno = EINVAL;
-    return -1;
-  }
-}
diff --git a/mdk-stage1/dietlibc/lib/tcsetpgrp.c b/mdk-stage1/dietlibc/lib/tcsetpgrp.c
deleted file mode 100644
index 6c40b5c79..000000000
--- a/mdk-stage1/dietlibc/lib/tcsetpgrp.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <termios.h>
-#include <sys/ioctl.h>
-
-int tcsetpgrp(int fildes, pid_t pgrpid)
-{
-  return ioctl(fildes, TIOCSPGRP, &pgrpid);
-}
diff --git a/mdk-stage1/dietlibc/lib/telldir.c b/mdk-stage1/dietlibc/lib/telldir.c
deleted file mode 100644
index 58be5d034..000000000
--- a/mdk-stage1/dietlibc/lib/telldir.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "dietdirent.h"
-#include <unistd.h>
-#include <dirent.h>
-
-off_t telldir(DIR *d) {
-  return lseek(d->fd,0,SEEK_CUR)-d->num+d->cur;
-}
diff --git a/mdk-stage1/dietlibc/lib/tolower.c b/mdk-stage1/dietlibc/lib/tolower.c
deleted file mode 100644
index 4b7c7cf2d..000000000
--- a/mdk-stage1/dietlibc/lib/tolower.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <ctype.h>
-
-inline int tolower(int c) {
-  return (c>='A' && c<='Z')?c-'A'+'a':c;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/toupper.c b/mdk-stage1/dietlibc/lib/toupper.c
deleted file mode 100644
index c048e60bb..000000000
--- a/mdk-stage1/dietlibc/lib/toupper.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <ctype.h>
-
-inline int toupper(int c) {
-  return (c>='a' && c<='z')?c-'a'+'A':c;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/ttyname.c b/mdk-stage1/dietlibc/lib/ttyname.c
deleted file mode 100644
index a6b479088..000000000
--- a/mdk-stage1/dietlibc/lib/ttyname.c
+++ /dev/null
@@ -1,59 +0,0 @@
-#include "dietfeatures.h"
-#include <unistd.h>
-#include <sys/stat.h>
-
-#ifdef __linux__
-
-extern int __ltostr(char *s, int size, unsigned long i, int base, char UpCase);
-
-char *ttyname(int fd) {
-#ifdef SLASH_PROC_OK
-  char ibuf[20];
-  static char obuf[20];
-  strcpy(ibuf,"/proc/self/fd/");
-  ibuf[__ltostr(ibuf+14,6,fd,10,0)+14]=0;
-  if (readlink(ibuf,obuf,sizeof(obuf)-1)<0) return 0;
-  return obuf;
-#else
-  static char buf[20]="/dev/tty";
-  struct stat s;
-  char *c=buf+8;
-  int n;
-  if (fstat(fd,&s)) return 0;
-  if (S_ISCHR(s.st_mode)) {
-    n=minor(s.st_rdev);
-    switch (major(s.st_rdev)) {
-    case 4:
-      buf[5]='t'; buf[7]='y';
-      if (n>63) {
-	n-=64;
-	*c='S';
-	++c;
-      }
-num:
-      c[__ltostr(c,6,n,10,0)]=0;
-      break;
-    case 2:
-      buf[5]='p'; buf[7]='y';
-      buf[8]='p'-(n>>4);
-      buf[9]=n%4+'0';
-      if (buf[9]>'9') *c+='a'-'0';
-      buf[10]=0;
-    case 136:
-    case 137:
-    case 138:
-    case 139:
-      buf[5]='p'; buf[7]='s';
-      n+=(major(s.st_rdev)-136)<<8;
-      *c='/'; ++c;
-      goto num;
-    default:
-      return 0;
-    }
-    return buf;
-  }
-  return 0;
-#endif
-}
-
-#endif
diff --git a/mdk-stage1/dietlibc/lib/usleep.c b/mdk-stage1/dietlibc/lib/usleep.c
deleted file mode 100644
index 494f99233..000000000
--- a/mdk-stage1/dietlibc/lib/usleep.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <linux/time.h>
-#include <time.h>
-
-/* nano * 1000 == usecs
- * usecs * 1000 == msecs
- * msecs * 1000 = secs */
-void usleep(unsigned int usecs) {
-  struct timespec t;
-  t.tv_sec=usecs/1000000;
-  t.tv_nsec=(usecs%1000000)*1000;
-  nanosleep(&t,&t);
-}
diff --git a/mdk-stage1/dietlibc/lib/vfork.c b/mdk-stage1/dietlibc/lib/vfork.c
deleted file mode 100644
index 795cddb05..000000000
--- a/mdk-stage1/dietlibc/lib/vfork.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <linux/types.h>
-#include <unistd.h>
-
-pid_t vfork(void) {
-  return fork();
-}
diff --git a/mdk-stage1/dietlibc/lib/vfprintf.c b/mdk-stage1/dietlibc/lib/vfprintf.c
deleted file mode 100644
index c33a2404b..000000000
--- a/mdk-stage1/dietlibc/lib/vfprintf.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <stdarg.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include "dietstdarg.h"
-
-int vfprintf(FILE *fstream, const char *format, va_list ap)
-{
-  char *tmp;
-  va_list cp_ap;
-  size_t n = 0;
-
-  va_copy(cp_ap, ap);
-  n=vsnprintf(0, 1000000, format, cp_ap);
-  tmp=alloca(n+2);
-  vsnprintf(tmp, n+1, format, ap);
-  fwrite(tmp, n,1, fstream);
-  return n;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/vprintf.c b/mdk-stage1/dietlibc/lib/vprintf.c
deleted file mode 100644
index 46ecc47a4..000000000
--- a/mdk-stage1/dietlibc/lib/vprintf.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <stdarg.h>
-#include <linux/types.h>
-#include <unistd.h>
-#include <stdlib.h>
-
-int vsnprintf (char *str,size_t size,const char *format, va_list arg_ptr);
-
-int vprintf(const char *format, va_list ap)
-{
-  char tmp[1000000];
-  size_t n = vsnprintf(tmp, sizeof(tmp), format, ap);
-  write(1, tmp, n);
-  return n;
-}
diff --git a/mdk-stage1/dietlibc/lib/vsnprintf.c b/mdk-stage1/dietlibc/lib/vsnprintf.c
deleted file mode 100644
index f425066e3..000000000
--- a/mdk-stage1/dietlibc/lib/vsnprintf.c
+++ /dev/null
@@ -1,238 +0,0 @@
-#include "dietfeatures.h"
-#include <stdarg.h>
-#include <sys/types.h>
-#include <stdlib.h>
-#include <string.h>
-#include "dietwarning.h"
-
-extern int __ltostr(char *s, int size, unsigned long i, int base, char UpCase);
-extern int __dtostr(double d,char *buf,int maxlen,int prec);
-
-int vsnprintf (char *str, size_t size, const char *format, va_list arg_ptr)
-{
-  size_t apos,i;
-  char ch,buf[1024];
-  char *pb;
-  char flag_in_sign;
-  char flag_hash,flag_zero,flag_left,flag_space,flag_sign,flag_dot,flag_long;
-  long number,width,preci,buf_len,pad;
-  char padwith;
-
-  size--;
-
-  apos=0;
-  while (apos<size)
-  {
-    ch=*format++;
-    switch (ch)
-    {
-    case '%':
-      flag_hash=0;
-      flag_zero=0;
-      flag_left=0;
-      flag_space=0;
-      flag_sign=0;
-      flag_dot=0;
-      flag_in_sign=0;
-      flag_long=0;
-
-      width=0;
-      padwith=' ';
-
-inn_vsnprintf:
-      if (apos>=size) continue; /* ARGL !!! */
-
-      ch=*format++;
-      switch (ch)
-      {
-/* Format end ?!? */
-      case 0:
-	return -1;
-	break;
-
-/* Format flag chars */
-      case '#':
-	flag_hash=1;
-	goto inn_vsnprintf;
-
-      case 'l':
-	++flag_long;
-	goto inn_vsnprintf;
-
-      case '0':
-	padwith='0';
-	goto inn_vsnprintf;
-
-      case '-':
-	flag_left=1;
-	goto inn_vsnprintf;
-
-      case ' ':
-	flag_space=1;
-	goto inn_vsnprintf;
-
-      case '+':
-	flag_sign=1;
-	goto inn_vsnprintf;
-
-      case '1':
-      case '2':
-      case '3':
-      case '4':
-      case '5':
-      case '6':
-      case '7':
-      case '8':
-      case '9':
-	if(flag_dot) return -1;
-	width=strtol(--format,&pb,10);
-	format=pb;
-	goto inn_vsnprintf;
-
-      case '*':
-	width=va_arg(arg_ptr,int);
-	goto inn_vsnprintf;
-
-      case '.':
-	flag_dot=1;
-	if (*format=='*') {
-	  preci=va_arg(arg_ptr,int);
-	  ++format;
-	} else {
-	  preci=strtol(format,&pb,10);
-	  format=pb;
-	}
-	goto inn_vsnprintf;
-
-/* Format conversion chars */
-      case 'c':
-	ch=(char)va_arg(arg_ptr,int);
-      case '%':
-	if (str) str[apos]=ch; ++apos;
-	break;
-
-      case 's':
-	pb=va_arg(arg_ptr,char *);
-#ifdef WANT_NULL_PRINTF
-	if (!pb) pb="(null)";
-#endif
-	buf_len=strlen(pb);
-	if (flag_dot && buf_len>preci) buf_len=preci;
-	if (buf_len>size-apos) buf_len=size-apos;
-
-print_out:
-	if (str) {
-	  if (width && (!flag_left))
-	  {
-	    for (pad=width-buf_len; pad>0; --pad) str[apos++]=padwith;
-	  }
-	  for(i=0;i<buf_len;++i) { str[apos++]=pb[i]; } /* strncpy */
-	  if (width && (flag_left))
-	  {
-	    for (pad=width-buf_len; pad>0; --pad) str[apos++]=padwith;
-	  }
-	} else {
-	  if (width) {
-	    apos+=width>buf_len?width:buf_len;
-	  } else {
-	    apos+=size>buf_len?buf_len:size;
-	  }
-	}
-
-	break;
-
-	/* Numbers */
-      case 'b':
-	i=2;
-	goto num_vsnprintf;
-      case 'p':
-	flag_hash=1;
-	width=sizeof(void *)<<1;
-	padwith='0';
-	ch='x';
-      case 'X':
-      case 'x':
-	i=16;
-	if (flag_hash)
-	{
-	  if (str) {
-	    str[apos++]='0';
-	    str[apos++]=ch;
-	  } else
-	    apos+=2;
-	}
-	goto num_vsnprintf;
-      case 'd':
-      case 'i':
-	flag_in_sign=1;
-      case 'u':
-	i=10;
-	goto num_vsnprintf;
-      case 'o':
-	i=8;
-	if (flag_hash) { if (str) str[apos]='0'; ++apos; }
-
-num_vsnprintf:
-	if (apos>=size) continue; /* ARGL !!! */
-
-	if (flag_long)
-	  number=va_arg(arg_ptr,long);
-	else
-	  number=va_arg(arg_ptr,int);
-
-	if (flag_in_sign && (number<0))
-	{
-	  number*=-1;
-	  flag_in_sign=2;
-	}
-
-	buf_len=__ltostr(buf+1,sizeof(buf)-1,(unsigned long) number,i,0);
-	pb=buf+1;
-
-	if (flag_in_sign==2)
-	{
-	  *(--pb)='-';
-	  buf_len++;
-	}
-	else if ((flag_in_sign)&&(flag_sign || flag_space))
-	{
-	  *(--pb)=(flag_sign)?'+':' ';
-	  buf_len++;
-	}
-	goto print_out;
-
-#ifdef WANT_FLOATING_POINT_IN_PRINTF
-      case 'f':
-      case 'g':
-	{
-	  double d=va_arg(arg_ptr,double);
-	  buf_len=__dtostr(d,buf,sizeof(buf),width?width:6);
-	  if (flag_dot) {
-	    char *tmp;
-	    if ((tmp=strchr(buf,'.'))) {
-	      while (preci>-1 && *++tmp) --preci;
-	      *tmp=0;
-	    }
-	  }
-	  pb=buf;
-	  goto print_out;
-	}
-#endif
-      default:
-	break;
-      }
-      break;
-    case 0:
-      if (str) str[apos]=0;
-      return apos;
-    default:
-      if (str) str[apos]=ch; apos++;
-      break;
-    }
-  }
-  if (str) str[apos]=0;
-  return apos;
-}
-
-link_warning("vsnprintf","warning: the printf functions add several kilobytes of bloat.")
-
diff --git a/mdk-stage1/dietlibc/lib/vsprintf.c b/mdk-stage1/dietlibc/lib/vsprintf.c
deleted file mode 100644
index 10ff04bd7..000000000
--- a/mdk-stage1/dietlibc/lib/vsprintf.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <stdarg.h>
-#include <linux/types.h>
-#include <stdlib.h>
-
-int vsnprintf (char *str,size_t size,const char *format, va_list arg_ptr);
-
-int vsprintf(char *dest,const char *format, va_list arg_ptr)
-{
-  return vsnprintf(dest,1000000,format,arg_ptr);
-}
diff --git a/mdk-stage1/dietlibc/lib/vsscanf.c b/mdk-stage1/dietlibc/lib/vsscanf.c
deleted file mode 100644
index 1c4c9b787..000000000
--- a/mdk-stage1/dietlibc/lib/vsscanf.c
+++ /dev/null
@@ -1,304 +0,0 @@
-#include "dietfeatures.h"
-#include <stdarg.h>
-#include <sys/types.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <string.h>
-
-const char *skip_ws(const char *str)
-{
-  while ((*str)&&(isspace(*str))) str++;
-  return str;
-}
-
-extern double strtod(const char *s,char **f);
-
-int vsscanf(const char *str, const char *format, va_list arg_ptr)
-{
-  int n=0,div;
-  unsigned char ch;
-
-  char flag_discard, flag_malloc, flag_half, flag_long, flag_longlong;
-  char flag_width;
-
-  unsigned long width;
-
-  /* arg_ptr tmps */
-#ifdef WANT_FLOATING_POINT_IN_SCANF
-  double d,*pd;
-  float *pf;
-#endif
-
-  long l=0,*pl;
-  short *ph;
-  int *pi;
-  char *s;
-
-  while ((*str)&&(*format))
-  {
-    const char *prevfmt=format;
-    format=skip_ws(format);
-    ch=*format++;
-    if (!ch) continue;
-
-    switch (ch)
-    {
-    case '%':
-      div=0;
-      flag_discard=0;
-      flag_malloc=0;
-      flag_half=0;
-      flag_long=0;
-      flag_longlong=0;
-
-      flag_width=0;
-      width=-1;
-
-inn_vsscanf:
-      ch=*format++;
-
-      switch (ch)
-      {
-      case 0:
-	return 0;
-
-      case '%':
-	if (*(str++)!=ch) return n;
-	break;
-
-      /* flags */
-      case '*':
-	flag_discard=1;
-	goto inn_vsscanf;
-
-      case 'a':
-	flag_malloc=1;
-	goto inn_vsscanf;
-
-      case 'h':
-	flag_half=1;
-	goto inn_vsscanf;
-
-      case 'l':
-	if (flag_long) flag_longlong=1;
-	flag_long=1;
-	goto inn_vsscanf;
-
-	/* longlong ? NOT YET ! */
-      case 'q':
-      case 'L':
-	flag_longlong=1;
-	goto inn_vsscanf;
-
-      case '1':
-      case '2':
-      case '3':
-      case '4':
-      case '5':
-      case '6':
-      case '7':
-      case '8':
-      case '9':
-	width=strtol(format-1,&s,10);
-	format=s;
-	flag_width=1;
-	goto inn_vsscanf;
-
-      /* conversion */
-
-      case 'n':
-	while (width && *str)
-	{
-	  *(s++)=*(str++);
-	  --width;
-	  l++;
-	}
-	if (!flag_discard)
-	{
-	  pl=(long *)va_arg(arg_ptr,long*);
-	  *pl=l;
-	  ++n;
-	}
-	break;
-
-      case 'p':
-      case 'X':
-      case 'x':
-	div+=6;
-      case 'd':
-	div+=2;
-      case 'o':
-	div+=8;
-      case 'u':
-      case 'i':
-	if (*(str=skip_ws(str)))
-	{
-	  l=strtol(str,&s,div);
-	  if (str!=s)
-	  {
-	    if (!flag_discard)
-	    {
-	      if (flag_long)
-	      {
-		pl=(long *)va_arg(arg_ptr,long*);
-		*pl=l;
-	      }
-	      else if (flag_half)
-	      {
-		ph=(short *)va_arg(arg_ptr,short*);
-		*ph=l;
-	      }
-	      else
-	      {
-		pi=(int *)va_arg(arg_ptr,int*);
-		*pi=l;
-	      }
-	      ++n;
-	    }
-	    str=s;
-	  }
-	  else
-	    return n;
-	}
-	break;
-
-#ifdef WANT_FLOATING_POINT_IN_SCANF
-      case 'e':
-      case 'E':
-      case 'f':
-      case 'g':
-	if (*(str=skip_ws(str)))
-	{
-	  d=strtod(str,&s);
-	  if (str!=s)
-	  {
-	    if (!flag_discard)
-	    {
-	      if (flag_long)
-	      {
-		pd=(double *)va_arg(arg_ptr,double*);
-		*pd=d;
-	      }
-	      else
-	      {
-		pf=(float *)va_arg(arg_ptr,float*);
-		*pf=d;
-	      }
-	      ++n;
-	    }
-	    str=s;
-	  }
-	  else
-	    return n;
-	}
-	break;
-#endif
-
-      case 'c':
-	if (!flag_discard)
-	{
-	  s=(char *)va_arg(arg_ptr,char*);
-	  ++n;
-	}
-	if (!flag_width) width=1;
-	while (width && *str)
-	{
-	  if (!flag_discard) *(s++)=*(str);
-	  ++str;
-	  --width;
-	}
-	break;
-
-      case 's':
-	if (!flag_discard)
-	{
-	  s=(char *)va_arg(arg_ptr,char*);
-	  ++n;
-	}
-	if (*(str=skip_ws(str)))
-	{
-	  while (width && (!isspace(*str)))
-	  {
-	    if (!flag_discard) *(s++)=*(str);
-	    if (!*str) break;
-	    ++str;
-	    --width;
-	  }
-	  *s=0;
-	}
-	break;
-
-#ifdef WANT_CHARACTER_CLASSES_IN_SCANF
-      case '[':
-	{
-	  char cset[256];
-	  int flag_not=0;
-	  int flag_dash=0;
-	  memset(cset,0,sizeof(cset));
-	  ch=*format++;
-
-	  /* first char specials */
-	  if (ch=='^')
-	  {
-	    flag_not=1;
-	    ch=*format++;
-	  }
-	  if ((ch=='-')||(ch==']'))
-	  {
-	    cset[ch]=1;
-	    ch=*format++;
-	  }
-
-	  /* almost all non special chars */
-	  for (;(*format) && (*format!=']');++format) {
-	    if (flag_dash)
-	    {
-	      register unsigned char tmp=*format;
-	      for (;ch<=tmp;++ch) cset[ch]=1;
-	      flag_dash=0;
-	      ch=*(++format);
-	    }
-	    else if (*format=='-') flag_dash=1;
-	    else
-	    {
-	      cset[ch]=1;
-	      ch=*format;
-	    }
-	  }
-
-	  /* last char specials */
-	  if (flag_dash) cset['-']=1;
-	  else cset[ch]=1;
-
-	  /* like %c or %s */
-	  if (!flag_discard)
-	  {
-	    s=(char *)va_arg(arg_ptr,char*);
-	    ++n;
-	  }
-	  while (width && (cset[(unsigned char)(*str)]-flag_not))
-	  {
-	    if (!flag_discard) *(s++)=*(str);
-	    if (!*str) break;
-	    ++str;
-	    --width;
-	  }
-	}
-	break;
-#endif
-      }
-      break;
-
-    default:
-      if (prevfmt<format) {
-	while (prevfmt<format) {
-	  if (*str!=*prevfmt) return n;
-	  ++str; ++prevfmt;
-	}
-      } else
-	if (*(str++)!=ch) return n;
-      break;
-    }
-  }
-  return n;
-}
diff --git a/mdk-stage1/dietlibc/lib/wait.c b/mdk-stage1/dietlibc/lib/wait.c
deleted file mode 100644
index 8459af18c..000000000
--- a/mdk-stage1/dietlibc/lib/wait.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <sys/types.h>
-#include <sys/wait.h>
-
-pid_t wait(int *status) {
-  return waitpid(-1,status,0);
-}
diff --git a/mdk-stage1/dietlibc/lib/wait3.c b/mdk-stage1/dietlibc/lib/wait3.c
deleted file mode 100644
index 19e90740c..000000000
--- a/mdk-stage1/dietlibc/lib/wait3.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <sys/wait.h>
-
-int wait3(int* status,int opts,struct rusage* rusage) {
-  return wait4(-1,status,opts,rusage);
-}
diff --git a/mdk-stage1/dietlibc/libcruft/___div.c b/mdk-stage1/dietlibc/libcruft/___div.c
deleted file mode 100644
index d359dc47b..000000000
--- a/mdk-stage1/dietlibc/libcruft/___div.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include "dietwarning.h"
-#include <stdlib.h>
-
-div_t div(int numer, int denom) {
-  div_t temp;
-  temp.quot=numer/denom;
-  temp.rem=numer%denom;
-  return temp;
-}
-
-link_warning("div","warning: your code uses div(), which is completely superfluous!");
diff --git a/mdk-stage1/dietlibc/libcruft/dnscruft.c b/mdk-stage1/dietlibc/libcruft/dnscruft.c
deleted file mode 100644
index d7a0efa50..000000000
--- a/mdk-stage1/dietlibc/libcruft/dnscruft.c
+++ /dev/null
@@ -1,115 +0,0 @@
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <sys/socket.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <arpa/inet.h>
-#include <string.h>
-#include <ctype.h>
-#include <stdlib.h>
-
-int __dns_fd=-1;
-
-void __dns_make_fd() {
-  int tmp;
-  struct sockaddr_in si;
-  if (__dns_fd>0) return;
-  tmp=socket(PF_INET,SOCK_DGRAM,IPPROTO_UDP);
-  if (tmp<0) {
-	  perror("__dns_make_fd!socket");
-	  return;
-  }
-  si.sin_family=AF_INET;
-  si.sin_port=0;
-  si.sin_addr.s_addr=INADDR_ANY;
-  if (bind(tmp,(struct sockaddr*)&si,sizeof(si))) {
-	  perror("__dns_make_fd!bind");
-	  return;
-  }
-  __dns_fd=tmp;
-}
-
-int __dns_servers=0;
-struct sockaddr __dns_server_ips[8];
-
-int __dns_search=0;
-char *__dns_domains[8];
-
-void __dns_readstartfiles() {
-  int fd;
-  char *buf=alloca(4096);
-  int len;
-  if (__dns_servers>0) return;
-  {
-    struct sockaddr_in to;
-    char *cacheip=getenv("DNSCACHEIP");
-    if (cacheip) {
-      to.sin_port=htons(53);
-      to.sin_family=AF_INET;
-      if (inet_aton(cacheip,&to.sin_addr)) {
-	memmove(__dns_server_ips,&to,sizeof(struct sockaddr));
-	++__dns_servers;
-      }
-    }
-  }
-  if ((fd=open("/etc/resolv.conf",O_RDONLY))<0) return;
-  len=read(fd,buf,4096);
-  close(fd);
-  {
-    char *last=buf+len;
-    for (; buf<last;) {
-      if (!strncmp(buf,"nameserver",10)) {
-	buf+=10;
-	while (buf<last && *buf!='\n') {
-	  while (buf<last && isblank(*buf)) ++buf;
-	  {
-	    char *tmp=buf;
-	    struct sockaddr_in i;
-	    while (buf<last && !isspace(*buf)) ++buf;
-	    if (buf>=last) break;
-	    *buf=0;
-	    if (inet_aton(tmp,&i.sin_addr)) {
-	      i.sin_family=AF_INET;
-	      i.sin_port=htons(53);
-	      memmove(&__dns_server_ips[__dns_servers],&i,sizeof(struct sockaddr));
-	      if (__dns_servers<8) ++__dns_servers;
-	    }
-	  }
-	}
-      }
-      if (!strncmp(buf,"search",6) || !strncmp(buf,"domain",6)) {
-	buf+=6;
-      }
-      while (buf<last && *buf!='\n') ++buf;
-      while (buf<last && *buf=='\n') ++buf;
-    }
-  }
-}
-
-/* return length of decoded data or -1 */
-int __dns_decodename(unsigned char *packet,int offset,unsigned char *dest,int maxlen) {
-  unsigned char *tmp;
-  unsigned char *max=dest+maxlen;
-  unsigned char *after=packet+offset;
-  int ok=0;
-  for (tmp=after; maxlen>0&&*tmp; ) {
-    if ((*tmp>>6)==3) {		/* goofy DNS decompression */
-      unsigned int ofs=((unsigned int)(*tmp&0x3f)<<8)|*(tmp+1);
-      if (ofs>=offset) return -1;	/* RFC1035: "pointer to a _prior_ occurrance" */
-      if (after<tmp+2) after=tmp+2;
-      tmp=packet+ofs;
-      ok=0;
-    } else {
-      unsigned int duh;
-      if (dest+*tmp+1>max) return -1;
-      for (duh=*tmp; duh>0; --duh)
-	*dest++=*++tmp;
-      *dest++='.'; ok=1;
-      ++tmp;
-      if (tmp>after) { after=tmp; if (!*tmp) ++after; }
-    }
-  }
-  if (ok) --dest;
-  *dest=0;
-  return after-packet;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/dnscruft2.c b/mdk-stage1/dietlibc/libcruft/dnscruft2.c
deleted file mode 100644
index b59207072..000000000
--- a/mdk-stage1/dietlibc/libcruft/dnscruft2.c
+++ /dev/null
@@ -1,185 +0,0 @@
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <sys/poll.h>
-#include <unistd.h>
-#include <errno.h>
-
-#include <stdio.h>
-
-extern int h_errno;
-
-static char dnspacket[]="\xfe\xfe\001\000\000\001\000\000\000\000\000\000";
-
-extern void __dns_make_fd();
-extern int __dns_fd;
-
-extern int __dns_servers;
-extern struct sockaddr __dns_server_ips[];
-
-extern void __dns_readstartfiles();
-
-extern int __dns_decodename(unsigned char *packet,int offset,unsigned char *dest,int maxlen);
-
-/* Oh boy, this interface sucks so badly, there are no words for it.
- * Not one, not two, but _three_ error signalling methods!  (*h_errnop
- * nonzero?  return value nonzero?  *RESULT zero?)  The glibc goons
- * really outdid themselves with this one. */
-int __dns_gethostbyx_r(const char* name, struct hostent* result,
-			char *buf, size_t buflen,
-			struct hostent **RESULT, int *h_errnop, int lookfor) {
-  int names,ips;
-  unsigned char *cur;
-  unsigned char *max;
-  unsigned char packet[512];
-  __dns_make_fd();
-
-  if (lookfor==1) {
-    result->h_aliases=(char**)(buf+8*4);
-    result->h_addrtype=AF_INET;
-    result->h_length=4;
-    result->h_addr_list=(char**)buf;
-  } else {
-    result->h_aliases=(char**)(buf+8*16);
-    result->h_addrtype=AF_INET6;
-    result->h_length=16;
-    result->h_addr_list=(char**)buf;
-  }
-  result->h_aliases[0]=0;
-
-  cur=buf+16*sizeof(char*);
-  max=buf+buflen;
-  names=ips=0;
-
-  memmove(packet,dnspacket,12);
-  *(unsigned short*)packet=rand();
-  {
-    unsigned char* x;
-    const char* y,* tmp;
-    x=packet+12; y=name;
-    while (*y) {
-      while (*y=='.') ++y;
-      for (tmp=y; *tmp && *tmp!='.'; ++tmp) ;
-      *x=tmp-y;
-      if (!(tmp-y)) break;
-      ++x;
-      if (x>=packet+510-(tmp-y)) { *h_errnop=ERANGE; return 1; }
-      memmove(x,y,tmp-y);
-      x+=tmp-y;
-      if (!*tmp) {
-	*x=0;
-	break;
-      }
-      y=tmp;
-    }
-    *++x= 0; *++x= lookfor;	/* A */
-    *++x= 0; *++x= 1;	/* IN */
-    ++x;
-    {
-      int i;	/* current server */
-      int j;	/* timeout count down */
-      struct pollfd duh;
-      i=0; j=30;
-      __dns_readstartfiles();
-      duh.fd=__dns_fd;
-      duh.events=POLLIN;
-      for (j=30; j>0; --j) {
-	sendto(__dns_fd,packet,x-packet,0,(struct sockaddr*)&(__dns_server_ips[i]),sizeof(struct sockaddr));
-	if (++i > __dns_servers) i=0;
-	if (poll(&duh,1,1) == 1) {
-	  /* read and parse answer */
-	  unsigned char inpkg[1500];
-	  /*int len=*/ read(__dns_fd,inpkg,1500);
-#if 0
-	  {
-	    int tft=open("duh",0);
-	    read(tft,inpkg,1500);
-	    close(tft);
-	  }
-#endif
-	  /* header, question, answer, authority, additional */
-	  if (inpkg[0]!=packet[0] || inpkg[1]!=packet[1]) continue;	/* wrong ID */
-	  if ((inpkg[2]&0xf9) != 0x81) continue;	/* not answer */
-	  if ((inpkg[3]&0x0f) != 0) break;		/* error */
-	  tmp=inpkg+12;
-	  {
-	    char name[257];
-	    unsigned short q=((unsigned short)inpkg[4]<<8)+inpkg[5];
-	    while (q>0) {
-	      while (*tmp) tmp+=*tmp+1;
-	      tmp+=5;
-	      --q;
-	    }
-	    q=((unsigned short)inpkg[6]<<8)+inpkg[7];
-	    if (q<1) break;
-	    while (q>0) {
-	      int decofs=__dns_decodename(inpkg,tmp-(char*)inpkg,name,256);
-	      if (decofs<0) break;
-	      tmp=inpkg+decofs;
-	      --q;
-	      if (tmp[0]!=0 || tmp[1]!=lookfor ||	/* TYPE != A */
-	          tmp[2]!=0 || tmp[3]!=1) {		/* CLASS != IN */
-		if (tmp[1]==5) {	/* CNAME */
-		  tmp+=10;
-		  decofs=__dns_decodename(inpkg,tmp-(char*)inpkg,name,256);
-		  if (decofs<0) break;
-		  tmp=inpkg+decofs;
-		} else
-		  break;
-		continue;
-	      }
-	      tmp+=10;	/* skip type, class, TTL and length */
-	      {
-		int slen;
-		if (lookfor==1 || lookfor==28) /* A or AAAA*/ {
-		  slen=strlen(name);
-		  if (cur+slen+8+(lookfor==28?12:0)>=max) { *h_errnop=NO_RECOVERY; return 1; }
-		} else if (lookfor==12) /* PTR */ {
-		  decofs=__dns_decodename(inpkg,tmp-(char*)inpkg,name,256);
-		  if (decofs<0) break;
-		  tmp=inpkg+decofs;
-		  slen=strlen(name);
-		} else
-		  slen=strlen(name);
-		strcpy(cur,name);
-		if (names==0)
-		  result->h_name=cur;
-		else
-		  result->h_aliases[names-1]=cur;
-		result->h_aliases[names]=0;
-		++names;
-/*		cur+=slen+1; */
-		cur+=(slen|3)+1;
-		result->h_addr_list[ips++] = cur;
-		if (lookfor==1) /* A */ {
-		  *(int*)cur=*(int*)tmp;
-		  cur+=4;
-		  result->h_addr_list[ips]=0;
-		} else if (lookfor==28) /* AAAA */ {
-		  {
-		    int i;
-		    for (i=0; i<16; ++i) cur[i]=tmp[i];
-		  }
-		  cur+=16;
-		  result->h_addr_list[ips]=0;
-		}
-	      }
-/*	      puts(name); */
-	    }
-	  }
-/*	  printf("%d answers\n",((unsigned short)inpkg[6]<<8)+inpkg[7]);
-	  printf("ok\n");*/
-	  *h_errnop=0;
-	  *RESULT=result;
-	  return 0;
-	}
-/*kaputt:*/
-      }
-    }
-  }
-  return 1;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/entlib.c b/mdk-stage1/dietlibc/libcruft/entlib.c
deleted file mode 100644
index f88b3f057..000000000
--- a/mdk-stage1/dietlibc/libcruft/entlib.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * dietlibc/lib/entlib.c - Generic delimited-line parsing library
- *
- * Copyright 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
- *
- * This is a brand new implementation, based on the interface
- * described in man-pages-1.34-1mdk man pages package.
- */
-
-
-#include "entlib.h" /* this is our only include */
-
-
-/*
- * __ent_start
- *
- * Allocates and zeroes the module's state structure,
- * and open a handle to /etc/passwd.
- *
- * Returns -1 on failure and sets errno, or zero for success.
- */
-
-int __ent_start(const char *pathname, struct __ent_state **st_ref)
-{
-	struct __ent_state *st;
-	
-	if (*st_ref)
-		return 0;
-
-	st = calloc(1, sizeof(*st));
-	if (!st) {
-		errno = ENOMEM;
-		return -1;
-	}
-
-	st->fd = open(pathname, O_RDONLY);
-	if (st->fd == -1) {
-		/* errno should have been set by open(2) */
-		free(st);
-		st = NULL;
-		return -1;
-	}
-
-	*st_ref = st;
-	return 0;
-}
-
-
-/*
- * __ent_get_line
- *
- * Eliminates a previous line from the buffer, if any.
- * Then reads in a new line from /etc/passwd, if necessary.
- *
- * Returns -1 on failure, or zero for success.
- */
-
-int __ent_get_line(struct __ent_state *st)
-{
-	int rc;
-
-	/* overwrite previous line, by shifting the rest
-	 * of the rest to the front of the buffer
-	 */
-	if (st->bufptr) {
-		unsigned int slop = st->buflen - st->bufptr;
-		memmove(st->ent_buf, &st->ent_buf[st->bufptr], slop);
-		st->bufptr = 0;
-		st->buflen = slop;
-		st->ent_buf[st->buflen] = 0; /* null terminate */
-	}
-
-	if (st->buflen == __ENT_BUFSIZ || strchr(st->ent_buf, '\n'))
-		return 0;
-
-	rc = read(st->fd, &st->ent_buf[st->buflen], __ENT_BUFSIZ - st->buflen);
-	if (rc < 0)
-		return -1;
-
-	st->buflen += rc;
-	if (st->buflen == 0)
-		return -1;
-
-	return 0;
-}
-
-
-/*
- * __ent_split
- *
- * Splits a string into parts based on a delimiter.
- * Stops processing when \n is reached also.
- *
- * Returns -1 on failure, or zero on success.
- */
-
-int __ent_split(struct __ent_state *st, char **parts,
-		int n_parts, int delimiter, int require_exact)
-{
-	char *s = &st->ent_buf[st->bufptr];
-	int idx = 0;
-
-	/* empty list */
-	if (!*s) {
-		if (!require_exact)
-			return 0;
-		return -1;
-	}
-
-	/* scan through string, sticking string pointers
-	 * into parts[] as delimiters are found
-	 */
-	parts[idx++] = s;
-	while (*s) {
-		st->bufptr++;
-		if (*s == '\n') {
-			*s = 0; /* null terminate */
-			break;
-		}
-		if (*s == delimiter) {
-			*s = 0; /* null terminate */
-			/* boundary error: too many delimiters */
-			if (idx == n_parts)
-				return -1;
-			s++;
-			parts[idx++] = s;
-		} else {
-			s++;
-		}
-	}
-
-	if (!require_exact)
-		return 0;
-	return (n_parts == idx) ? 0 : -1;
-}
-
-
-void __ent_set(struct __ent_state *st)
-{
-	if (!st)
-		return;
-	st->buflen = st->bufptr = 0;
-	lseek(st->fd, 0, SEEK_SET);
-}
-
-
-void __ent_end(struct __ent_state *st)
-{
-	if (!st)
-		return;
-	close(st->fd);
-	free(st);
-}
diff --git a/mdk-stage1/dietlibc/libcruft/entlib.h b/mdk-stage1/dietlibc/libcruft/entlib.h
deleted file mode 100644
index 2659d542e..000000000
--- a/mdk-stage1/dietlibc/libcruft/entlib.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * dietlibc/lib/entlib.h - Generic delimited-line parsing library header
- *
- * Copyright 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
- *
- * This is a brand new implementation, based on the interface
- * described in man-pages-1.34-1mdk man pages package.
- */
-
-#ifndef __ENTLIB_H
-#define __ENTLIB_H
-
-#include <sys/types.h>	/* for open(2), lseek(2) */
-#include <sys/stat.h>	/* for open(2) */
-#include <fcntl.h>	/* for open(2) */
-#include <unistd.h>	/* for close(2), lseek(2) */
-#include <stdlib.h>	/* for calloc(3), free(3) */
-#include <errno.h>	/* for errno */
-#include <string.h>	/* for memmove(3) */
-#include <stdlib.h>	/* for atoi(3) */
-#include <paths.h>	/* for the file locations */
-
-#include <pwd.h>	/* for struct passwd */
-#include <grp.h>	/* for struct group */
-#include <shadow.h>	/* for struct spwd */
-
-/* should be a multiple of 64 to create decent alignment */
-#define __ENT_BUFSIZ (64 * 2)
-#define __ENT_RAW_BUFSIZ (__ENT_BUFSIZ + 2) /* some overlap required */
-
-struct __ent_state {
-	char ent_buf[__ENT_RAW_BUFSIZ];	/* raw file data buffer */
-	unsigned int buflen;		/* amount of valid data in ent_buf */
-	unsigned int bufptr;		/* next valid position in ent_buf */
-	int fd;				/* /etc/passwd file descriptor */
-};
-
-extern int __ent_start(const char *pathname, struct __ent_state **st_ref);
-extern int __ent_get_line(struct __ent_state *st);
-extern int __ent_split(struct __ent_state *st, char **parts, int n_parts, int delimiter, int require_exact);
-extern void __ent_set(struct __ent_state *st);
-extern void __ent_end(struct __ent_state *st);
-
-#endif /* __ENTLIB_H */
diff --git a/mdk-stage1/dietlibc/libcruft/getdtablesize.c b/mdk-stage1/dietlibc/libcruft/getdtablesize.c
deleted file mode 100644
index 227354714..000000000
--- a/mdk-stage1/dietlibc/libcruft/getdtablesize.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <unistd.h>
-#include <limits.h>
-
-int getdtablesize(void) {
-  return OPEN_MAX;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/getgrgid.c b/mdk-stage1/dietlibc/libcruft/getgrgid.c
deleted file mode 100644
index 0c223056c..000000000
--- a/mdk-stage1/dietlibc/libcruft/getgrgid.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <grp.h>
-#include <string.h>
-#include <stdlib.h>
-
-struct group *getgrgid(gid_t gid) {
-  struct group *tmp;
-  setgrent();
-  for (;;) {
-    tmp=getgrent();
-    if (!tmp) return 0;
-    if (tmp->gr_gid == gid)
-      return tmp;
-  }
-}
diff --git a/mdk-stage1/dietlibc/libcruft/getgrnam.c b/mdk-stage1/dietlibc/libcruft/getgrnam.c
deleted file mode 100644
index 1bdbb42a8..000000000
--- a/mdk-stage1/dietlibc/libcruft/getgrnam.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <grp.h>
-#include <string.h>
-#include <stdlib.h>
-
-struct group *getgrnam(const char* name) {
-  struct group *tmp;
-  setgrent();
-  for (;;) {
-    tmp=getgrent();
-    if (!tmp) return 0;
-    if (!strcmp(tmp->gr_name,name))
-      return tmp;
-  }
-}
diff --git a/mdk-stage1/dietlibc/libcruft/gethostbyaddr.c b/mdk-stage1/dietlibc/libcruft/gethostbyaddr.c
deleted file mode 100644
index a4207d44d..000000000
--- a/mdk-stage1/dietlibc/libcruft/gethostbyaddr.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <sys/poll.h>
-#include <unistd.h>
-#include <errno.h>
-
-extern int h_errno;
-
-struct hostent* gethostbyaddr(const void *addr, socklen_t len, int type) {
-  static struct hostent hostbuf;
-  struct hostent *hp;
-  size_t hstbuflen;
-  char *tmphstbuf;
-  int res;
-  int herr;
-
-  hstbuflen = 1024;
-  /* Allocate buffer, remember to free it to avoid a memory leakage.  */
-  tmphstbuf = malloc (hstbuflen);
-
-  while ((res = gethostbyaddr_r (addr, len, type, &hostbuf, tmphstbuf, hstbuflen,
-				  &hp, &herr)) == ERANGE)
-    {
-      /* Enlarge the buffer.  */
-      hstbuflen *= 2;
-      tmphstbuf = realloc (tmphstbuf, hstbuflen);
-    }
-  /*  Check for errors.  */
-  if (res || hp == NULL)
-    return NULL;
-  return hp;
-}
-
diff --git a/mdk-stage1/dietlibc/libcruft/gethostbyaddr_r.c b/mdk-stage1/dietlibc/libcruft/gethostbyaddr_r.c
deleted file mode 100644
index 37174ab13..000000000
--- a/mdk-stage1/dietlibc/libcruft/gethostbyaddr_r.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <sys/poll.h>
-#include <unistd.h>
-#include <errno.h>
-
-#include <stdio.h>
-
-extern int __dns_gethostbyx_r(const char* name, struct hostent* result,
-			char *buf, size_t buflen,
-			struct hostent **RESULT, int *h_errnop, int lookfor);
-
-static int i2a(char* dest,unsigned int x) {
-  register unsigned int tmp=x;
-  register int len=0;
-  if (x>=100) { *dest++=tmp/100+'0'; tmp=tmp%100; ++len; }
-  if (x>=10) { *dest++=tmp/10+'0'; tmp=tmp%10; ++len; }
-  *dest++=tmp+'0';
-  return len+1;
-}
-
-/* Oh boy, this interface sucks so badly, there are no words for it.
- * Not one, not two, but _three_ error signalling methods!  (*h_errnop
- * nonzero?  return value nonzero?  *RESULT zero?)  The glibc goons
- * really outdid themselves with this one. */
-int gethostbyaddr_r(const char* addr, size_t length, int format,
-		    struct hostent* result, char *buf, size_t buflen,
-		    struct hostent **RESULT, int *h_errnop) {
-  if (format==AF_INET) {
-    char tmpbuf[50];
-    char *tmp;
-    int res;
-    tmp=tmpbuf+i2a(tmpbuf,(unsigned char)addr[3]); *tmp++='.';
-    tmp+=i2a(tmp,(unsigned char)addr[2]); *tmp++='.';
-    tmp+=i2a(tmp,(unsigned char)addr[1]); *tmp++='.';
-    tmp+=i2a(tmp,(unsigned char)addr[0]); strcpy(tmp,".in-addr.arpa");
-    res= __dns_gethostbyx_r(tmpbuf,result,buf+4,buflen-4,RESULT,h_errnop,12);	/* 12 == ns_t_ptr */
-    if (res==0) {
-      result->h_addr_list[0]=buf;
-      result->h_addr_list[1]=buf;
-      *(int*)buf=*(int*)addr;
-    }
-    return res;
-  }
-  return 1;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/gethostbyname.c b/mdk-stage1/dietlibc/libcruft/gethostbyname.c
deleted file mode 100644
index 5db5bf3c5..000000000
--- a/mdk-stage1/dietlibc/libcruft/gethostbyname.c
+++ /dev/null
@@ -1,39 +0,0 @@
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <sys/poll.h>
-#include <unistd.h>
-#include <errno.h>
-
-extern int h_errno;
-
-struct hostent* gethostbyname (const char *host)
-{
-  static struct hostent hostbuf;
-  struct hostent *hp;
-  size_t hstbuflen;
-  char *tmphstbuf;
-  int res;
-  int herr;
-
-  hstbuflen = 1024;
-  /* Allocate buffer, remember to free it to avoid a memory leakage.  */
-  tmphstbuf = malloc (hstbuflen);
-
-  while ((res = gethostbyname_r (host, &hostbuf, tmphstbuf, hstbuflen,
-				  &hp, &herr)) == ERANGE)
-    {
-      /* Enlarge the buffer.  */
-      hstbuflen *= 2;
-      tmphstbuf = realloc (tmphstbuf, hstbuflen);
-    }
-  /*  Check for errors.  */
-  if (res || hp == NULL)
-    return NULL;
-  return hp;
-}
-
diff --git a/mdk-stage1/dietlibc/libcruft/gethostbyname2.c b/mdk-stage1/dietlibc/libcruft/gethostbyname2.c
deleted file mode 100644
index 3d8296616..000000000
--- a/mdk-stage1/dietlibc/libcruft/gethostbyname2.c
+++ /dev/null
@@ -1,40 +0,0 @@
-
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <sys/poll.h>
-#include <unistd.h>
-#include <errno.h>
-
-extern int h_errno;
-
-struct hostent* gethostbyname2(const char *host,int AF)
-{
-  static struct hostent hostbuf;
-  struct hostent *hp;
-  size_t hstbuflen;
-  char *tmphstbuf;
-  int res;
-  int herr;
-
-  hstbuflen = 1024;
-  /* Allocate buffer, remember to free it to avoid a memory leakage.  */
-  tmphstbuf = malloc (hstbuflen);
-
-  while ((res = gethostbyname2_r (host, AF,&hostbuf, tmphstbuf, hstbuflen,
-				  &hp, &herr)) == ERANGE)
-    {
-      /* Enlarge the buffer.  */
-      hstbuflen *= 2;
-      tmphstbuf = realloc (tmphstbuf, hstbuflen);
-    }
-  /*  Check for errors.  */
-  if (res || hp == NULL)
-    return NULL;
-  return hp;
-}
-
diff --git a/mdk-stage1/dietlibc/libcruft/gethostbyname2_r.c b/mdk-stage1/dietlibc/libcruft/gethostbyname2_r.c
deleted file mode 100644
index b505ccfbc..000000000
--- a/mdk-stage1/dietlibc/libcruft/gethostbyname2_r.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <sys/poll.h>
-#include <unistd.h>
-#include <errno.h>
-
-#include <stdio.h>
-
-extern int __dns_gethostbyx_r(const char* name, struct hostent* result,
-			char *buf, size_t buflen,
-			struct hostent **RESULT, int *h_errnop, int lookfor);
-
-/* Oh boy, this interface sucks so badly, there are no words for it.
- * Not one, not two, but _three_ error signalling methods!  (*h_errnop
- * nonzero?  return value nonzero?  *RESULT zero?)  The glibc goons
- * really outdid themselves with this one. */
-int gethostbyname2_r(const char* name, int AF, struct hostent* result,
-				char *buf, size_t buflen,
-				struct hostent **RESULT, int *h_errnop) {
-  int L=strlen(name);
-  int lookfor=0;
-  switch (AF) {
-  case AF_INET: lookfor=1; break;
-  case AF_INET6: lookfor=28; break;
-  default: *h_errnop=EINVAL; return 1;
-  }
-  result->h_name=buf;
-  if (buflen<L) { *h_errnop=ERANGE; return 1; }
-  strcpy(buf,name);
-  return __dns_gethostbyx_r(name,result,buf+L,buflen-L,RESULT,h_errnop,lookfor);
-}
diff --git a/mdk-stage1/dietlibc/libcruft/gethostbyname_r.c b/mdk-stage1/dietlibc/libcruft/gethostbyname_r.c
deleted file mode 100644
index d5a531f0f..000000000
--- a/mdk-stage1/dietlibc/libcruft/gethostbyname_r.c
+++ /dev/null
@@ -1,30 +0,0 @@
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <sys/poll.h>
-#include <unistd.h>
-#include <errno.h>
-
-#include <stdio.h>
-
-extern int __dns_gethostbyx_r(const char* name, struct hostent* result,
-			char *buf, size_t buflen,
-			struct hostent **RESULT, int *h_errnop, int lookfor);
-
-/* Oh boy, this interface sucks so badly, there are no words for it.
- * Not one, not two, but _three_ error signalling methods!  (*h_errnop
- * nonzero?  return value nonzero?  *RESULT zero?)  The glibc goons
- * really outdid themselves with this one. */
-int gethostbyname_r(const char* name, struct hostent* result,
-				char *buf, size_t buflen,
-				struct hostent **RESULT, int *h_errnop) {
-  int L=strlen(name);
-  result->h_name=buf;
-  if (buflen<L) { *h_errnop=ERANGE; return 1; }
-  strcpy(buf,name);
-  return __dns_gethostbyx_r(name,result,buf+L,buflen-L,RESULT,h_errnop,1);
-}
diff --git a/mdk-stage1/dietlibc/libcruft/getlogin.c b/mdk-stage1/dietlibc/libcruft/getlogin.c
deleted file mode 100644
index 359f44d9f..000000000
--- a/mdk-stage1/dietlibc/libcruft/getlogin.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <stdlib.h>
-
-char* getlogin() {
-  return getenv("LOGNAME");
-}
diff --git a/mdk-stage1/dietlibc/libcruft/getpagesize.c b/mdk-stage1/dietlibc/libcruft/getpagesize.c
deleted file mode 100644
index dea4a9693..000000000
--- a/mdk-stage1/dietlibc/libcruft/getpagesize.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-
-#ifndef PAGE_SIZE
-#define PAGE_SIZE 4096
-#endif
-
-size_t __libc_getpagesize(void) {
-  return PAGE_SIZE;
-}
-
-size_t getpagesize(void)       __attribute__((weak,alias("__libc_getpagesize")));
-
diff --git a/mdk-stage1/dietlibc/libcruft/getpass.c b/mdk-stage1/dietlibc/libcruft/getpass.c
deleted file mode 100644
index 3da7cd2b3..000000000
--- a/mdk-stage1/dietlibc/libcruft/getpass.c
+++ /dev/null
@@ -1,40 +0,0 @@
-#include <termios.h>
-#include <unistd.h>
-#include <limits.h>
-#include <fcntl.h>
-#include <string.h>
-
-char *getpass(const char* prompt) {
-  struct termios old,tmp;
-  int out,in=open("/dev/tty",O_RDWR);
-  int doclose=(in>=0);
-  static char buf[PASS_MAX];
-  if (doclose) { in=0; out=2; } else out=in;
-  if (!tcgetattr(in,&old)) {
-    tmp=old;
-    tmp.c_lflag &= ~(ECHO|ISIG);
-    tcsetattr(in,TCSAFLUSH,&tmp);
-  }
-  write(out,prompt,strlen(prompt));
-  {
-    int nread,ofs=0;
-    for (;;) {
-      nread=read(in,buf+ofs,PASS_MAX-ofs);
-      if (nread<0) {
-	buf[ofs]=0;
-	break;
-      } else if (ofs+nread>=PASS_MAX) {
-	buf[PASS_MAX-1]=0;
-	break;
-      } else if (buf[ofs+nread-1]=='\n') {
-	buf[ofs+nread-1]=0;
-	break;
-      }
-      ofs+=nread;
-    }
-    write(out,"\n",1);
-  }
-  tcsetattr(in,TCSAFLUSH,&old);
-  if (doclose) close(in);
-  return buf;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/getpwnam.c b/mdk-stage1/dietlibc/libcruft/getpwnam.c
deleted file mode 100644
index 53aae74d1..000000000
--- a/mdk-stage1/dietlibc/libcruft/getpwnam.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <pwd.h>
-#include <string.h>
-#include <stdlib.h>
-
-struct passwd *getpwnam(const char * name) {
-  struct passwd *tmp;
-  setpwent();
-  for (;;) {
-    tmp=getpwent();
-    if (!tmp) return 0;
-    if (!strcmp(tmp->pw_name,name))
-      return tmp;
-  }
-}
diff --git a/mdk-stage1/dietlibc/libcruft/getpwuid.c b/mdk-stage1/dietlibc/libcruft/getpwuid.c
deleted file mode 100644
index eef14e6e8..000000000
--- a/mdk-stage1/dietlibc/libcruft/getpwuid.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <pwd.h>
-#include <string.h>
-#include <stdlib.h>
-
-struct passwd *getpwuid(uid_t uid) {
-  struct passwd *tmp;
-  setpwent();
-  for (;;) {
-    tmp=getpwent();
-    if (!tmp) return 0;
-    if (tmp->pw_uid==uid)
-      return tmp;
-  }
-}
diff --git a/mdk-stage1/dietlibc/libcruft/getspnam.c b/mdk-stage1/dietlibc/libcruft/getspnam.c
deleted file mode 100644
index e6573345d..000000000
--- a/mdk-stage1/dietlibc/libcruft/getspnam.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <shadow.h>
-#include <string.h>
-#include <stdlib.h>
-
-struct spwd *getspnam(const char * name) {
-  struct spwd *tmp;
-  setspent();
-  for (;;) {
-    tmp=getspent();
-    if (!tmp) return 0;
-    if (!strcmp(tmp->sp_namp,name))
-      return tmp;
-  }
-}
diff --git a/mdk-stage1/dietlibc/libcruft/grent.c b/mdk-stage1/dietlibc/libcruft/grent.c
deleted file mode 100644
index 0357657de..000000000
--- a/mdk-stage1/dietlibc/libcruft/grent.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * dietlibc/lib/grent.c - getgrent(3)/setgrent(3)/endgrent(3) implementation
- *
- * Copyright 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
- *
- * This is a brand new implementation, based on the interface
- * described in man-pages-1.34-1mdk man pages package.
- */
-
-
-#include "entlib.h" /* this is our only include */
-
-#define MAX_GROUP_MEMBERS 16 /* matches Linux kernel task struct */
-
-static struct __ent_state *st = NULL; /* state held across calls */
-static char *gr_mem[MAX_GROUP_MEMBERS+1];
-static struct group gr;
-
-struct group *getgrent(void)
-{
-	char *parts[4], *grouplist;
-	unsigned int bufptr;
-
-	if (__ent_start(_PATH_GROUP, &st))
-		return NULL;
-	if (__ent_get_line(st))
-		goto err_out;
-	if (__ent_split(st, parts, 4, ':', 1) < 0)
-		goto err_out;
-
-	gr.gr_name	= parts[0];
-	gr.gr_passwd	= parts[1];
-	gr.gr_gid	= (gid_t) atoi(parts[2]);
-	grouplist	= parts[3];
-
-	memset(&gr_mem, 0, sizeof(gr_mem));
-	gr.gr_mem = gr_mem;
-
-	/* rewind bufptr to beginning of group list */
-	bufptr = st->bufptr;
-	st->bufptr = (int) (grouplist - st->ent_buf);
-
-	__ent_split(st, gr_mem, MAX_GROUP_MEMBERS, ',', 0);
-	st->bufptr = bufptr;
-
-	return &gr;
-
-err_out:
-	st->buflen = st->bufptr = 0;	/* invalidate file data buffer */
-	return NULL;
-}
-
-void setgrent(void) { __ent_set(st); }
-void endgrent(void) { __ent_end(st); st=NULL; }
diff --git a/mdk-stage1/dietlibc/libcruft/h_errno.c b/mdk-stage1/dietlibc/libcruft/h_errno.c
deleted file mode 100644
index 73ead0469..000000000
--- a/mdk-stage1/dietlibc/libcruft/h_errno.c
+++ /dev/null
@@ -1 +0,0 @@
-int h_errno;
diff --git a/mdk-stage1/dietlibc/libcruft/herrno_location.c b/mdk-stage1/dietlibc/libcruft/herrno_location.c
deleted file mode 100644
index 203f73d4b..000000000
--- a/mdk-stage1/dietlibc/libcruft/herrno_location.c
+++ /dev/null
@@ -1,5 +0,0 @@
-extern int h_errno;
-
-int *__h_errno_location() { return &h_errno; }
-
-int *h_errno_location() __attribute__((weak,alias("__h_errno_location")));
diff --git a/mdk-stage1/dietlibc/libcruft/inet_addr.c b/mdk-stage1/dietlibc/libcruft/inet_addr.c
deleted file mode 100644
index 0b8531ab1..000000000
--- a/mdk-stage1/dietlibc/libcruft/inet_addr.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-unsigned long int inet_addr(const char *cp) {
-  struct in_addr foo;
-  if (inet_aton(cp,&foo))
-    return foo.s_addr;
-  else
-    return (unsigned long int)-1;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/inet_aton.c b/mdk-stage1/dietlibc/libcruft/inet_aton.c
deleted file mode 100644
index ac7d9d007..000000000
--- a/mdk-stage1/dietlibc/libcruft/inet_aton.c
+++ /dev/null
@@ -1,43 +0,0 @@
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <stdlib.h>
-
-/* inet_aton() converts the Internet host address cp from the standard
- * numbers-and-dots  notation  into  binary data  and  stores it in the
- * structure that inp points to. inet_aton returns nonzero if the
- * address is valid, zero if not. */
-
-/* problem is, inet_aton is historically quite, uh, lenient.
- * the following are all acceptable:
- *   0x7f000001 == 127.1 == 127.0.0.1.0 == 127.0.0.1
- * btw: 127.0.0.x.y == 127.0.0.(x|y)
- * and: 10.1.1 == 10.1.0.1 (huh?!)
- * and: 10 == 0.0.0.10 (?!?!?)
- * The Berkeley people must have been so stoned that they are still high.
- */
-
-/* I hereby disclaim that I wrote this code. */
-int inet_aton(const char *cp, struct in_addr *inp) {
-  int i;
-  unsigned int ip=0;
-  char *tmp=(char*)cp;
-  for (i=24; ;) {
-    long j;
-    j=strtol(tmp,&tmp,0);
-    if (*tmp==0) {
-      ip|=j;
-      break;
-    }
-    if (*tmp=='.') {
-      if (j>255) return 0;
-      ip|=(j<<i);
-      if (i>0) i-=8;
-      ++tmp;
-      continue;
-    }
-    return 0;
-  }
-  inp->s_addr=htonl(ip);
-  return 1;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/inet_ntoa.c b/mdk-stage1/dietlibc/libcruft/inet_ntoa.c
deleted file mode 100644
index f8c975f7a..000000000
--- a/mdk-stage1/dietlibc/libcruft/inet_ntoa.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-extern char *inet_ntoa_r(struct in_addr in,char* buf);
-
-char *inet_ntoa(struct in_addr in) {
-  static char buf[20];
-  return inet_ntoa_r(in,buf);
-}
diff --git a/mdk-stage1/dietlibc/libcruft/inet_ntoa_r.c b/mdk-stage1/dietlibc/libcruft/inet_ntoa_r.c
deleted file mode 100644
index dcf0eab7b..000000000
--- a/mdk-stage1/dietlibc/libcruft/inet_ntoa_r.c
+++ /dev/null
@@ -1,22 +0,0 @@
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-static unsigned int i2a(char* dest,unsigned int x) {
-  register unsigned int tmp=x;
-  register unsigned int len=0;
-  if (x>=100) { *dest++=tmp/100+'0'; tmp=tmp%100; ++len; }
-  if (x>=10) { *dest++=tmp/10+'0'; tmp=tmp%10; ++len; }
-  *dest++=tmp+'0';
-  return len+1;
-}
-
-char *inet_ntoa_r(struct in_addr in,char* buf) {
-  unsigned int len;
-  unsigned char *ip=(unsigned char*)&in;
-  len=i2a(buf,ip[0]); buf[len]='.'; ++len;
-  len+=i2a(buf+ len,ip[1]); buf[len]='.'; ++len;
-  len+=i2a(buf+ len,ip[2]); buf[len]='.'; ++len;
-  len+=i2a(buf+ len,ip[3]); buf[len]=0;
-  return buf;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/inet_ntop.c b/mdk-stage1/dietlibc/libcruft/inet_ntop.c
deleted file mode 100644
index 77c47f239..000000000
--- a/mdk-stage1/dietlibc/libcruft/inet_ntop.c
+++ /dev/null
@@ -1,75 +0,0 @@
-#include <arpa/inet.h>
-
-extern char *inet_ntoa_r(struct in_addr in,char* buf);
-
-static const unsigned char V4mappedprefix[12]={0,0,0,0,0,0,0,0,0,0,0xff,0xff};
-
-static char tohex(char hexdigit) {
-  return hexdigit>9?hexdigit+'a'-10:hexdigit+'0';
-}
-
-static int fmt_xlong(char* s,unsigned int i) {
-  char* bak=s;
-  *s=tohex((i>>12)&0xf); if (s!=bak || *s!='0') ++s;
-  *s=tohex((i>>8)&0xf); if (s!=bak || *s!='0') ++s;
-  *s=tohex((i>>4)&0xf); if (s!=bak || *s!='0') ++s;
-  *s=tohex(i&0xf);
-  return s-bak+1;
-}
-
-unsigned int fmt_ip6(char *s,const char ip[16])
-{
-  unsigned int len;
-  unsigned int i;
-  unsigned int temp;
-  unsigned int compressing;
-  int j;
-
-  len = 0; compressing = 0;
-  for (j=0; j<16; j+=2) {
-    if (j==12 && !memcmp(ip,V4mappedprefix,12)) {
-      inet_ntoa_r(*(struct in_addr*)(ip+12),s);
-      temp=strlen(s);
-      return len+temp;
-    }
-    temp = ((unsigned long) (unsigned char) ip[j] << 8) +
-            (unsigned long) (unsigned char) ip[j+1];
-    if (temp == 0) {
-      if (!compressing) {
-	compressing=1;
-	if (j==0) {
-	  *s++=':'; ++len;
-	}
-      }
-    } else {
-      if (compressing) {
-	compressing=0;
-	*s++=':'; ++len;
-      }
-      i = fmt_xlong(s,temp); len += i; s += i;
-      if (j<14) {
-	*s++ = ':';
-	++len;
-      }
-    }
-  }
-  *s=0;
-  return len;
-}
-
-const char* inet_ntop(int AF, const void *CP, char *BUF, size_t LEN) {
-  char buf[100];
-  int len;
-  if (AF==AF_INET) {
-    inet_ntoa_r(*(struct in_addr*)CP,buf);
-    len=strlen(buf);
-  } else if (AF==AF_INET6) {
-    len=fmt_ip6(buf,CP);
-  } else
-    return 0;
-  if (len<LEN) {
-    strcpy(BUF,buf);
-    return BUF;
-  }
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/inet_pton.c b/mdk-stage1/dietlibc/libcruft/inet_pton.c
deleted file mode 100644
index d5c17509c..000000000
--- a/mdk-stage1/dietlibc/libcruft/inet_pton.c
+++ /dev/null
@@ -1,97 +0,0 @@
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <errno.h>
-
-static unsigned int scan_ip6(const char *s,char ip[16])
-{
-  unsigned int i;
-  unsigned int len=0;
-  unsigned long u;
-
-  char suffix[16];
-  int prefixlen=0;
-  int suffixlen=0;
-
-  for (i=0; i<16; i++) ip[i]=0;
-
-  for (;;) {
-    if (*s == ':') {
-      len++;
-      if (s[1] == ':') {	/* Found "::", skip to part 2 */
-	s+=2;
-	len++;
-	break;
-      }
-      s++;
-    }
-    {
-      char *tmp;
-      u=strtol(s,&tmp,16);
-      i=tmp-s;
-    }
-
-    if (!i) return 0;
-    if (prefixlen==12 && s[i]=='.') {
-      /* the last 4 bytes may be written as IPv4 address */
-      if (inet_aton(s,(struct in_addr*)(ip+12)))
-	return i+len;
-      else
-	return 0;
-    }
-    ip[prefixlen++] = (u >> 8);
-    ip[prefixlen++] = (u & 255);
-    s += i; len += i;
-    if (prefixlen==16)
-      return len;
-  }
-
-/* part 2, after "::" */
-  for (;;) {
-    if (*s == ':') {
-      if (suffixlen==0)
-	break;
-      s++;
-      len++;
-    } else if (suffixlen!=0)
-      break;
-    {
-      char *tmp;
-      u=strtol(s,&tmp,16);
-      i=tmp-s;
-    }
-    if (!i) {
-      len--;
-      break;
-    }
-    if (suffixlen+prefixlen<=12 && s[i]=='.') {
-      if (inet_aton(s,(struct in_addr*)(suffix+suffixlen))) {
-	suffixlen+=4;
-	len+=strlen(s);
-	break;
-      } else
-	prefixlen=12-suffixlen;	/* make end-of-loop test true */
-    }
-    suffix[suffixlen++] = (u >> 8);
-    suffix[suffixlen++] = (u & 255);
-    s += i; len += i;
-    if (prefixlen+suffixlen==16)
-      break;
-  }
-  for (i=0; i<suffixlen; i++)
-    ip[16-suffixlen+i] = suffix[i];
-  return len;
-}
-
-int inet_pton(int AF, const char *CP, void *BUF) {
-  if (AF==AF_INET) {
-    if (!inet_aton(CP,(struct in_addr*)BUF))
-      return 0;
-  } else if (AF==AF_INET6) {
-    if (CP[scan_ip6(CP,BUF)])
-      return 0;
-  } else {
-    errno=EAFNOSUPPORT;
-    return -1;
-  }
-  return 1;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/initgroups.c b/mdk-stage1/dietlibc/libcruft/initgroups.c
deleted file mode 100644
index 7d24866e9..000000000
--- a/mdk-stage1/dietlibc/libcruft/initgroups.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <grp.h>
-#include <sys/types.h>
-#include <string.h>
-
-int initgroups(const char *user, gid_t group) {
-  int n=0;
-  gid_t grouplist[32];
-  struct group *g;
-  setgrent();
-  while ((g=getgrent())) {
-    char **duh=g->gr_mem;
-    while (*duh) {
-      if (!strcmp(*duh,user)) {
-	grouplist[n]=g->gr_gid;
-	if (++n>=32)
-	  break;
-      }
-      duh++;
-    }
-  }
-  return setgroups(n,grouplist);
-}
-
diff --git a/mdk-stage1/dietlibc/libcruft/mkstemp.c b/mdk-stage1/dietlibc/libcruft/mkstemp.c
deleted file mode 100644
index 3b24ecb54..000000000
--- a/mdk-stage1/dietlibc/libcruft/mkstemp.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <unistd.h>
-#include <fcntl.h>
-#include <string.h>
-#include <errno.h>
-
-int mkstemp(char* template) {
-  char *tmp=template+strlen(template)-6;
-  int randfd;
-  int i,res;
-  unsigned int random;
-  for (i=0; i<6; ++i) if (tmp[i]!='X') { __set_errno(EINVAL); return -1; }
-  randfd=open("/dev/urandom",O_RDONLY);
-  for (;;) {
-    read(randfd,&random,sizeof(random));
-    for (i=0; i<6; ++i) {
-      int hexdigit=(random>>(i*5))&0x1f;
-      tmp[i]=hexdigit>9?hexdigit+'a'-10:hexdigit+'0';
-    }
-    res=open(template,O_CREAT|O_RDWR|O_EXCL,0600);
-    if (res>=0) return res;
-  }
-  close(randfd);
-}
diff --git a/mdk-stage1/dietlibc/libcruft/pwent.c b/mdk-stage1/dietlibc/libcruft/pwent.c
deleted file mode 100644
index 30a8a0957..000000000
--- a/mdk-stage1/dietlibc/libcruft/pwent.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * dietlibc/lib/pwent.c - getpwent(3)/setpwent(3)/endpwent(3) implementation
- *
- * Copyright 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
- *
- * This is a brand new implementation, based on the interface
- * described in man-pages-1.34-1mdk man pages package.
- */
-
-
-#include "entlib.h" /* this is our only include */
-
-static struct __ent_state *st = NULL; /* state held across calls */
-static struct passwd pw;
-
-struct passwd *getpwent(void)
-{
-	char *parts[7];
-
-	if (__ent_start(_PATH_PASSWD, &st))
-		return NULL;
-	if (__ent_get_line(st))
-		goto err_out;
-	if (__ent_split(st, parts, 7, ':', 1) < 0)
-		goto err_out;
-
-	pw.pw_name	= parts[0];
-	pw.pw_passwd	= parts[1];
-	pw.pw_uid	= (uid_t) atoi(parts[2]);
-	pw.pw_gid	= (gid_t) atoi(parts[3]);
-	pw.pw_gecos	= parts[4];
-	pw.pw_dir	= parts[5];
-	pw.pw_shell	= parts[6];
-
-	return &pw;
-
-err_out:
-	st->buflen = st->bufptr = 0;	/* invalidate file data buffer */
-	return NULL;
-}
-
-void setpwent(void) { __ent_set(st); }
-void endpwent(void) { __ent_end(st); st=NULL; }
diff --git a/mdk-stage1/dietlibc/libcruft/res_init.c b/mdk-stage1/dietlibc/libcruft/res_init.c
deleted file mode 100644
index 9322af298..000000000
--- a/mdk-stage1/dietlibc/libcruft/res_init.c
+++ /dev/null
@@ -1,7 +0,0 @@
-extern int __dns_servers;
-extern void __dns_readstartfiles(void);
-
-int res_init(void) {
-  __dns_servers=0;
-  __dns_readstartfiles();
-}
diff --git a/mdk-stage1/dietlibc/libcruft/spent.c b/mdk-stage1/dietlibc/libcruft/spent.c
deleted file mode 100644
index e4beb81e4..000000000
--- a/mdk-stage1/dietlibc/libcruft/spent.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * dietlibc/lib/spent.c - getspent(3)/setspent(3)/endspent(3) implementation
- *
- * Copyright 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
- *
- * This is a brand new implementation, based on the interface
- * described in man-pages-1.34-1mdk man pages package.
- */
-
-
-#include "entlib.h" /* this is our only include */
-
-static struct __ent_state *st = NULL; /* state held across calls */
-static struct spwd sp;
-
-struct spwd *getspent(void)
-{
-	char *parts[9];
-
-	if (__ent_start(_PATH_SHADOW, &st))
-		return NULL;
-	if (__ent_get_line(st))
-		goto err_out;
-	if (__ent_split(st, parts, 9, ':', 1) < 0)
-		goto err_out;
-
-	sp.sp_namp	= parts[0];
-	sp.sp_pwdp	= parts[1];
-	sp.sp_lstchg	= atoi(parts[2]); /* XXX: atol */
-	sp.sp_min	= atoi(parts[3]);
-	sp.sp_max	= atoi(parts[4]);
-	sp.sp_warn	= atoi(parts[5]);
-	sp.sp_inact	= atoi(parts[6]);
-	sp.sp_expire	= atoi(parts[7]);
-	sp.sp_flag	= atoi(parts[8]);
-
-	return &sp;
-
-err_out:
-	st->buflen = st->bufptr = 0;	/* invalidate file data buffer */
-	return NULL;
-}
-
-void setspent(void) { __ent_set(st); }
-void endspent(void) { __ent_end(st); st=NULL; }
diff --git a/mdk-stage1/dietlibc/libcrypt/crypt.c b/mdk-stage1/dietlibc/libcrypt/crypt.c
deleted file mode 100644
index 933397f5f..000000000
--- a/mdk-stage1/dietlibc/libcrypt/crypt.c
+++ /dev/null
@@ -1,309 +0,0 @@
-#include "dietfeatures.h"
-#include <unistd.h>
-
-/* Initial permutation, */
-static char IP[] = {
-  57,49,41,33,25,17, 9, 1,
-  59,51,43,35,27,19,11, 3,
-  61,53,45,37,29,21,13, 5,
-  63,55,47,39,31,23,15, 7,
-  56,48,40,32,24,16, 8, 0,
-  58,50,42,34,26,18,10, 2,
-  60,52,44,36,28,20,12, 4,
-  62,54,46,38,30,22,14, 6
-};
-
-/* Final permutation, FP = IP^(-1) */
-static char FP[] = {
-  39, 7,47,15,55,23,63,31,
-  38, 6,46,14,54,22,62,30,
-  37, 5,45,13,53,21,61,29,
-  36, 4,44,12,52,20,60,28,
-  35, 3,43,11,51,19,59,27,
-  34, 2,42,10,50,18,58,26,
-  33, 1,41, 9,49,17,57,25,
-  32, 0,40, 8,48,16,56,24
-};
-
-/* Permuted-choice 1 from the key bits to yield C and D.
- * Note that bits 8,16... are left out: They are intended for a parity check.
- */
-static char PC1_C[] = {
-  56,48,40,32,24,16, 8,
-   0,57,49,41,33,25,17,
-   9, 1,58,50,42,34,26,
-  18,10, 2,59,51,43,35
-};
-
-static char PC1_D[] = {
-  62,54,46,38,30,22,14,
-   6,61,53,45,37,29,21,
-  13, 5,60,52,44,36,28,
-  20,12, 4,27,19,11, 3
-};
-
-/* Sequence of shifts used for the key schedule. */
-static char shifts[] = { 1,1,2,2,2,2,2,2,1,2,2,2,2,2,2,1 };
-
-/*
- * Permuted-choice 2, to pick out the bits from the CD array that generate
- * the key schedule.
- */
-static char PC2_C[] = {
-  13, 16, 10, 23,  0,  4,  2, 27, 14,  5, 20,  9,
-  22, 18, 11,  3, 25,  7, 15,  6, 26, 19, 12,  1
-};
-
-static char PC2_D[] = {
-  12, 23,  2,  8, 18, 26,  1, 11, 22, 16,  4, 19,
-  15, 20, 10, 27,  5, 24, 17, 13, 21,  7,  0,  3
-};
-
-/* The C and D arrays used to calculate the key schedule. */
-
-static char C[28];
-static char D[28];
-/* The key schedule. Generated from the key. */
-static char KS[16][48];
-
-/* The E bit-selection table. */
-static char E[48];
-static char e2[] = {
-  32,  1,  2,  3,  4,  5,  4,  5,  6,  7,  8,  9,
-   8,  9, 10, 11, 12, 13, 12, 13, 14, 15, 16, 17,
-  16, 17, 18, 19, 20, 21, 20, 21, 22, 23, 24, 25,
-  24, 25, 26, 27, 28, 29, 28, 29, 30, 31, 32,  1
-};
-
-/* Set up the key schedule from the key. */
-void setkey(const char *key)
-{
-  register int i, j, k;
-  int  t;
-  int  s;
-
-  /* First, generate C and D by permuting the key.  The low order bit of each
-   * 8-bit char is not used, so C and D are only 28 bits apiece.
-   */
-  for(i=0; i < 28; i++) {
-    C[i] = key[(int)PC1_C[i]];
-    D[i] = key[(int)PC1_D[i]];
-  }
-  /* To generate Ki, rotate C and D according to schedule and pick up a
-   * permutation using PC2.
-   */
-  for(i=0; i < 16; i++) {
-    /* rotate. */
-    s = shifts[i];
-    for(k=0; k < s; k++) {
-      t = C[0];
-      for(j=0; j < 27; j++)
-	C[j] = C[j+1];
-      C[27] = t;
-      t = D[0];
-      for(j=0; j < 27; j++)
-	D[j] = D[j+1];
-      D[27] = t;
-    }
-    /* get Ki. Note C and D are concatenated. */
-    for(j=0; j < 24; j++) {
-      KS[i][j] = C[(int)PC2_C[j]];
-      KS[i][j+24] = D[(int)PC2_D[j]];
-    }
-  }
-
-  for(i=0; i < 48; i++)
-    E[i] = e2[i];
-}
-
-/* The 8 selection functions. For some reason, they give a 0-origin index,
- * unlike everything else.
- */
-static char S[8][64] = {
-  {
-    14, 4,13, 1, 2,15,11, 8, 3,10, 6,12, 5, 9, 0, 7,
-     0,15, 7, 4,14, 2,13, 1,10, 6,12,11, 9, 5, 3, 8,
-     4, 1,14, 8,13, 6, 2,11,15,12, 9, 7, 3,10, 5, 0,
-    15,12, 8, 2, 4, 9, 1, 7, 5,11, 3,14,10, 0, 6,13
-  },
-
-  {
-    15, 1, 8,14, 6,11, 3, 4, 9, 7, 2,13,12, 0, 5,10,
-     3,13, 4, 7,15, 2, 8,14,12, 0, 1,10, 6, 9,11, 5,
-     0,14, 7,11,10, 4,13, 1, 5, 8,12, 6, 9, 3, 2,15,
-    13, 8,10, 1, 3,15, 4, 2,11, 6, 7,12, 0, 5,14, 9
-  },
-
-  {
-    10, 0, 9,14, 6, 3,15, 5, 1,13,12, 7,11, 4, 2, 8,
-    13, 7, 0, 9, 3, 4, 6,10, 2, 8, 5,14,12,11,15, 1,
-    13, 6, 4, 9, 8,15, 3, 0,11, 1, 2,12, 5,10,14, 7,
-     1,10,13, 0, 6, 9, 8, 7, 4,15,14, 3,11, 5, 2,12
-  },
-
-  {
-     7,13,14, 3, 0, 6, 9,10, 1, 2, 8, 5,11,12, 4,15,
-    13, 8,11, 5, 6,15, 0, 3, 4, 7, 2,12, 1,10,14, 9,
-    10, 6, 9, 0,12,11, 7,13,15, 1, 3,14, 5, 2, 8, 4,
-     3,15, 0, 6,10, 1,13, 8, 9, 4, 5,11,12, 7, 2,14
-  },
-
-  {
-     2,12, 4, 1, 7,10,11, 6, 8, 5, 3,15,13, 0,14, 9,
-    14,11, 2,12, 4, 7,13, 1, 5, 0,15,10, 3, 9, 8, 6,
-     4, 2, 1,11,10,13, 7, 8,15, 9,12, 5, 6, 3, 0,14,
-    11, 8,12, 7, 1,14, 2,13, 6,15, 0, 9,10, 4, 5, 3
-  },
-
-  {
-    12, 1,10,15, 9, 2, 6, 8, 0,13, 3, 4,14, 7, 5,11,
-    10,15, 4, 2, 7,12, 9, 5, 6, 1,13,14, 0,11, 3, 8,
-     9,14,15, 5, 2, 8,12, 3, 7, 0, 4,10, 1,13,11, 6,
-     4, 3, 2,12, 9, 5,15,10,11,14, 1, 7, 6, 0, 8,13
-  },
-
-  {
-     4,11, 2,14,15, 0, 8,13, 3,12, 9, 7, 5,10, 6, 1,
-    13, 0,11, 7, 4, 9, 1,10,14, 3, 5,12, 2,15, 8, 6,
-     1, 4,11,13,12, 3, 7,14,10,15, 6, 8, 0, 5, 9, 2,
-     6,11,13, 8, 1, 4,10, 7, 9, 5, 0,15,14, 2, 3,12
-  },
-
-  {
-    13, 2, 8, 4, 6,15,11, 1,10, 9, 3,14, 5, 0,12, 7,
-     1,15,13, 8,10, 3, 7, 4,12, 5, 6,11, 0,14, 9, 2,
-     7,11, 4, 1, 9,12,14, 2, 0, 6,10,13,15, 3, 5, 8,
-     2, 1,14, 7, 4,10, 8,13,15,12, 9, 0, 3, 5, 6,11
-  }
-};
-
-/* P is a permutation on the selected combination of the current L and key. */
-static char P[] = {
-  15, 6,19,20, 28,11,27,16,  0,14,22,25,  4,17,30, 9,
-   1, 7,23,13, 31,26, 2, 8, 18,12,29, 5, 21,10, 3,24
-};
-
-/* The current block, divided into 2 halves. */
-static char L[32], R[32];
-static char tempL[32];
-static char f[32];
-
-/* The combination of the key and the input, before selection. */
-static char preS[48];
-
-/* The payoff: encrypt a block. */
-void encrypt(char block[64], int edflag)
-{
-  int  i, ii;
-  register int t, j, k;
-
-  /* First, permute the bits in the input */
-  for(j=0; j < 64; j++)
-    L[j] = block[(int)IP[j]];
-  /* Perform an encryption operation 16 times. */
-  for(ii=0; ii < 16; ii++) {
-    i = ii;
-    /* Save the R array, which will be the new L. */
-    for(j=0; j < 32; j++)
-      tempL[j] = R[j];
-    /* Expand R to 48 bits using the E selector;
-     * exclusive-or with the current key bits.
-     */
-    for(j=0; j < 48; j++)
-      preS[j] = R[E[j]-1] ^ KS[i][j];
-    /* The pre-select bits are now considered in 8 groups of 6 bits each.
-     * The 8 selection functions map these 6-bit quantities into 4-bit
-     * quantities and the results permuted to make an f(R, K).
-     * The indexing into the selection functions is peculiar;
-     * it could be simplified by rewriting the tables.
-     */
-    for(j=0; j < 8; j++) {
-      t = ((j<<1)+j)<<1;
-      k = S[j][(preS[t]<<5)+
-	 (preS[t+1]<<3)+
-	 (preS[t+2]<<2)+
-	 (preS[t+3]<<1)+
-	 (preS[t+4]   )+
-	 (preS[t+5]<<4)];
-      t = j << 2;
-      f[t  ] = (k>>3)&01;
-      f[t+1] = (k>>2)&01;
-      f[t+2] = (k>>1)&01;
-      f[t+3] = (k   )&01;
-    }
-    /* The new R is L ^ f(R, K). The f here has to be permuted first, though. */
-    for(j=0; j < 32; j++)
-      R[j] = L[j] ^ f[(int)P[j]];
-    /* Finally, the new L (the original R) is copied back. */
-    for(j=0; j < 32; j++)
-      L[j] = tempL[j];
-  }
-  /* The output L and R are reversed. */
-  for(j=0; j < 32; j++) {
-    L[j] ^= R[j];
-    R[j] ^= L[j];
-    L[j] ^= R[j];
-  }
-  /* The final output gets the inverse permutation of the very original. */
-  for(j=0; j < 64; j++)
-    block[j] = L[(int)FP[j]];
-}
-
-char * crypt(const char *pw, const char *salt)
-{
-  register int i, j, c;
-  static char block[66], iobuf[16];
-
-  for(i=0; i < 66; i++)
-    block[i] = 0;
-  for(i=0; (c= *pw) && i < 64; pw++) {
-    for(j=0; j < 7; j++, i++)
-      block[i] = (c>>(6-j)) & 01;
-    i++;
-  }
-
-  setkey(block);
-
-  for(i=0; i < 66; i++)
-    block[i] = 0;
-
-  for(i=0; i < 2; i++) {
-    c = *salt++;
-    iobuf[i] = c;
-    if(c > 'Z')
-      c -= 6;
-    if(c > '9')
-      c -= 7;
-    c -= '.';
-    for(j=0; j < 6; j++) {
-      if((c>>j) & 01) {
-	int ind1 = (((i<<1)+i)<< 1) + j;
-	int ind2 = ind1 + 24;
-	E[ind1] ^= E[ind2];
-	E[ind2] ^= E[ind1];
-	E[ind1] ^= E[ind2];
-      }
-    }
-  }
-
-  for(i=0; i < 25; i++)
-    encrypt(block, 0);
-
-  for(i=0; i < 11; i++) {
-    c = 0;
-    for(j=0; j < 6; j++) {
-      c <<= 1;
-      c |= block[(((i<<1)+i)<<1)+j];
-    }
-    c += '.';
-    if(c > '9')
-      c += 7;
-    if(c > 'Z')
-      c += 6;
-    iobuf[i+2] = c;
-  }
-  iobuf[i+2] = 0;
-  if(iobuf[1] == 0)
-    iobuf[1] = iobuf[0];
-  return(iobuf);
-}
diff --git a/mdk-stage1/dietlibc/libdl/Makefile b/mdk-stage1/dietlibc/libdl/Makefile
deleted file mode 100644
index c0463f887..000000000
--- a/mdk-stage1/dietlibc/libdl/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-# local "test" make file
-
-SRC = $(wildcard *.c) test/test.c
-OBJ = _dl_jump.o $(SRC:.c=.o)
-
-#CFLAGS = -Wall -O2
-CFLAGS = -g
-
-%.o : %.S
-	$(HOME)/bin/diet gcc $(CFLAGS) -c -o $@ $^
-
-%.o : %.c
-	$(HOME)/bin/diet gcc $(CFLAGS) -c -o $@ $^
-
-all: test.out
-
-test.g: test.c
-	gcc -o $@ $^ -ldl
-
-test.out: $(OBJ)
-	$(HOME)/bin/diet gcc -o $@ $^
-
-clean:
-	$(RM) *.o *.a *.out *~ # *.so
diff --git a/mdk-stage1/dietlibc/libdl/README b/mdk-stage1/dietlibc/libdl/README
deleted file mode 100644
index 5d77bde34..000000000
--- a/mdk-stage1/dietlibc/libdl/README
+++ /dev/null
@@ -1,6 +0,0 @@
-this is the experimental libdl test-pre-pre-alpha code
-
-written by Olaf Dreesen
-
-Shouldn't work yet had some problems with the elf specs...
-and more inconsistencies...
diff --git a/mdk-stage1/dietlibc/libdl/_dl_int.h b/mdk-stage1/dietlibc/libdl/_dl_int.h
deleted file mode 100644
index 659e6ee0f..000000000
--- a/mdk-stage1/dietlibc/libdl/_dl_int.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef ___DL_INT_H__
-#define ___DL_INT_H__
-
-#include <elf.h>
-
-struct _dl_handle {
-  /* basic */
-  void *	mem_base;	/* base address of maped *.so */
-  unsigned long mem_size;	/* len of mem block */
-  unsigned int  lnk_count;	/* reference count */
-
-  /* symbol resolve helper */
-  unsigned long*hash_tab;	/* hash table */
-  Elf32_Sym *	dyn_sym_tab;	/* dynamic symbol table */
-  char *	dyn_str_tab;	/* dyn_name table */
-
-  Elf32_Rel *	plt_rel;	/* PLT relocation table */
-
-  /* FINI */
-  void (*fini)(void);
-};
-
-#define HASH_BUCKET_LEN(p)	((p))
-#define HASH_BUCKET(p)		((p)+2)
-
-#define HASH_CHAIN_LEN(p)	((p)+1)
-#define HASH_CHAIN(p)		((p)+2+HASH_BUCKET_LEN(p))
-
-unsigned long elf_hash(const unsigned char *name);
-
-#endif
diff --git a/mdk-stage1/dietlibc/libdl/_dl_jump.S b/mdk-stage1/dietlibc/libdl/_dl_jump.S
deleted file mode 100644
index 134f31ea5..000000000
--- a/mdk-stage1/dietlibc/libdl/_dl_jump.S
+++ /dev/null
@@ -1,8 +0,0 @@
-.text
-.global _dl_jump
-_dl_jump:
-	call	do_rel
-	pop	%edx
-	pop	%edx
-	jmp	*%eax
-
diff --git a/mdk-stage1/dietlibc/libdl/_dl_open.c b/mdk-stage1/dietlibc/libdl/_dl_open.c
deleted file mode 100644
index 1f907db21..000000000
--- a/mdk-stage1/dietlibc/libdl/_dl_open.c
+++ /dev/null
@@ -1,207 +0,0 @@
-#include <stdio.h>
-#include <unistd.h>
-#include <sys/mman.h>
-#include <dlfcn.h>
-#include <linux/elf.h>
-
-#include "_dl_int.h"
-
-struct _dl_handle dl_test;
-
-#define _ELF_DWN_ROUND(ps,n)	((n)&(~((ps)-1)))
-#define _ELF_UP_ROUND(ps,n)	((((n)&((ps)-1))?(ps):0)+ _ELF_DWN_ROUND((ps),(n)))
-#define _ELF_RST_ROUND(ps,n)	((n)&((ps)-1))
-
-void _dl_jump();
-
-/*
- * this file is a Q. & D. hack ... don't think this is bug free or meaningfull
- */
-
-static void *do_map_in(void *base, unsigned long length, int flags, int fd, unsigned long offset)
-{
-  int perm = 0;
-  if (flags & PF_X) perm|=PROT_EXEC;
-  if (flags & PF_R) perm|=PROT_READ;
-  if (flags & PF_W) perm|=PROT_WRITE;
-  return mmap(base, length, perm, MAP_PRIVATE|((base)?MAP_FIXED:0), fd, offset);
-}
-
-unsigned long do_rel(struct _dl_handle * tmp_dl, unsigned long off)
-{
-//  struct _dl_handle * tmp_dl = ((void*)*((&off)-1));
-  Elf32_Rel *tmp = ((void*)tmp_dl->plt_rel)+off;
-  int sym=ELF32_R_SYM(tmp->r_info);
-  register unsigned long sym_val;
-
-  printf("do_rel %08x %08x\n",tmp_dl,off);
-
-  printf ("do_rel %08x+%x\n",tmp_dl->plt_rel,off);
-  printf("do_rel @ %08x with type %d -> %d\n",tmp->r_offset,ELF32_R_TYPE(tmp->r_info),sym);
-
-  printf("do_rel sym %08x\n",tmp_dl->dyn_sym_tab[sym].st_value);
-
-  /* modify GOT for REAL symbol */
-  sym_val=((unsigned long)(tmp_dl->mem_base+tmp_dl->dyn_sym_tab[sym].st_value));
-  *((unsigned long*)(tmp_dl->mem_base+tmp->r_offset))=sym_val;
-
-  printf("do_rel sym %08x\n",sym_val);
-  /* HOWTO JUMP ?!? */
-  return sym_val;
-}
-
-void *_dl_open(const char*pathname, int fd, int flag)
-{
-  int ps=getpagesize();
-  int i;
-  unsigned char buf[1024];
-  char *m=0,*d;
-  struct _dl_handle *ret=0;
-
-  unsigned long l;
-
-  Elf32_Ehdr *eh;
-  Elf32_Phdr *ph;
-
-  int ld_nr=0;
-  Elf32_Phdr *ld[4]={0,0,0,0};
-  Elf32_Phdr *dyn=0;
-
-  if (fd==-1) return 0;
-
-  printf("_dl_open: %s\n",pathname);
-
-  read(fd, buf, 1024);
-  eh=(Elf32_Ehdr*)buf;
-  ph=(Elf32_Phdr*)&buf[eh->e_phoff];
-
-  for (i=0; i<eh->e_phnum; i++) {
-    if (ph[i].p_type==PT_LOAD) {
-      ld[ld_nr++]=ph+i;
-    }
-    if (ph[i].p_type==PT_DYNAMIC) {
-      dyn=ph+i;
-    }
-  }
-
-  if (ld_nr==1) {
-    unsigned long offset = _ELF_DWN_ROUND(ps,ld[0]->p_offset);
-    unsigned long off = _ELF_RST_ROUND(ps,ld[0]->p_offset);
-    unsigned long length = _ELF_UP_ROUND(ps,ld[0]->p_memsz+off);
-    m = (char*)do_map_in(0, length, ld[0]->p_flags, fd, offset);
-
-    /* zero pad bss */
-    l = ld[0]->p_offset+ld[0]->p_filesz;
-    memset(m+l,0,length-l);
-
-    dl_test.mem_base=m;
-    dl_test.mem_size=length;
-    dl_test.lnk_count=0;
-
-    ret = &dl_test;
-  }
-  else if (ld_nr==2) { /* aem... yes Quick & Really Dirty / for the avarage 99% */
-    //unsigned long text_addr = _ELF_DWN_ROUND(ps,ld[0]->p_vaddr);
-    unsigned long text_offset = _ELF_DWN_ROUND(ps,ld[0]->p_offset);
-    unsigned long text_off = _ELF_RST_ROUND(ps,ld[0]->p_offset);
-    unsigned long text_size = _ELF_UP_ROUND(ps,ld[0]->p_memsz+text_off);
-
-    unsigned long data_addr = _ELF_DWN_ROUND(ps,ld[1]->p_vaddr);
-    unsigned long data_offset = _ELF_DWN_ROUND(ps,ld[1]->p_offset);
-    unsigned long data_off = _ELF_RST_ROUND(ps,ld[1]->p_offset);
-    unsigned long data_size = _ELF_UP_ROUND(ps,ld[1]->p_memsz+data_off);
-    unsigned long data_fsize = _ELF_UP_ROUND(ps,ld[1]->p_filesz+data_off);
-
-    /* mmap all mem_blocks for *.so */
-    l = text_size+data_size;
-
-    dl_test.mem_size=l;
-
-    m = (char*) do_map_in(0,l,ld[0]->p_flags,fd,text_offset);
-
-    /* release data,bss part */
-    mprotect(m+data_addr, data_size, PROT_NONE);
-
-    /* mmap data,bss part */
-    d = (char*) do_map_in(m+data_addr,data_fsize,ld[1]->p_flags,fd,data_offset);
-
-    /* zero pad bss */
-    l = data_off+ld[1]->p_filesz;
-    memset(d+l,0,data_size-l);
-
-    /* more bss ? */
-    if (data_size>data_fsize) {
-      l = data_size-data_fsize;
-      mmap(d+data_fsize, l, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0);
-    }
-
-    dl_test.mem_base=m;
-    dl_test.lnk_count=0;
-    ret = &dl_test;
-  }
-
-  printf("_dl_open pre resolv\n");
-  if (ret) {
-    Elf32_Dyn* dyn_tab = (void*)m+dyn->p_vaddr;
-    void (*init)();
-    unsigned long* got=0;
-    void* jmprel=0;
-    int pltreltype=0;
-    int pltrelsize=0;
-
-    printf("_dl_open IN resolv\n");
-    for(i=0;dyn_tab[i].d_tag;i++) {
-      if (dyn_tab[i].d_tag==DT_HASH) {
-	ret->hash_tab = (unsigned long*)(m+dyn_tab[i].d_un.d_ptr);
-      }
-      if (dyn_tab[i].d_tag==DT_SYMTAB) {
-	ret->dyn_sym_tab = (Elf32_Sym*)(m+dyn_tab[i].d_un.d_ptr);
-      }
-      if (dyn_tab[i].d_tag==DT_STRTAB) {
-	ret->dyn_str_tab = (char*)(m+dyn_tab[i].d_un.d_ptr);
-      }
-      if (dyn_tab[i].d_tag==DT_FINI) {
-	ret->fini = (void(*)(void))(m+dyn_tab[i].d_un.d_val);
-      }
-      if (dyn_tab[i].d_tag==DT_INIT) {
-	init = (void(*)(void))(m+dyn_tab[i].d_un.d_val);
-	printf("init @ %08x\n",init);
-      }
-      if (dyn_tab[i].d_tag==DT_PLTGOT) {
-	got=(unsigned long*)(m+dyn_tab[i].d_un.d_val);
-      }
-      if (dyn_tab[i].d_tag==DT_PLTREL) {
-	pltreltype=dyn_tab[i].d_un.d_val;
-      }
-      if (dyn_tab[i].d_tag==DT_PLTRELSZ) {
-	pltrelsize=dyn_tab[i].d_un.d_val;
-      }
-      if (dyn_tab[i].d_tag==DT_JMPREL) {
-	jmprel=(m+dyn_tab[i].d_un.d_val);
-	dl_test.plt_rel=jmprel;
-      }
-    }
-    /* GOT */
-    got[0]+=(unsigned long)m;
-    got[1]=(unsigned long)&dl_test;
-//    got[2]=(unsigned long)do_rel;
-    got[2]=(unsigned long)(_dl_jump);
-    /* */
-
-    if (pltreltype == DT_REL) {
-      Elf32_Rel *tmp = jmprel;
-      for (;(char*)tmp<(((char*)jmprel)+pltrelsize);(char*)tmp=((char*)tmp)+sizeof(Elf32_Rel)) {
-	*((unsigned long*)(m+tmp->r_offset))+=(unsigned long)m;
-//	*((unsigned long*)(m+tmp->r_offset))+=(unsigned long)do_rel;
-	printf("rel @ %08x with type %d -> %d\n",tmp->r_offset,ELF32_R_TYPE(tmp->r_info),ELF32_R_SYM(tmp->r_info));
-      }
-    }
-
-  printf("_dl_open post resolv, pre init\n");
-    init();
-  }
-  printf("_dl_open post resolv, init\n");
-
-  close(fd);
-  return ret;
-}
diff --git a/mdk-stage1/dietlibc/libdl/_dl_search.c b/mdk-stage1/dietlibc/libdl/_dl_search.c
deleted file mode 100644
index 5e3217d46..000000000
--- a/mdk-stage1/dietlibc/libdl/_dl_search.c
+++ /dev/null
@@ -1,84 +0,0 @@
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <dlfcn.h>
-
-#include <fcntl.h>
-#include <stdio.h>
-
-#define WANT_LD_SO_CONF_SEARCH
-
-static const char *_dl_search_rpath=0;
-void _dl_set_rpath(const char *path) { _dl_search_rpath=path; }
-
-/* search a colon (semicolon) seperated path for the libraray "filename" */
-static int _dl_search_path(char *buf, int len, const char*path, const int pathlen, const char *filename)
-{
-  int fd,l=len,i=1;
-  const char *c,*pe=path+pathlen;
-
-  if (path) {
-    for (c=path; c<pe; c+=i) {
-      if ((*c==':')||(*c==';')) ++c;
-      i=strcspn(c,":;");
-      if (i) {
-	strncpy(buf, c, i); buf[i]=0;
-	l-=i;
-	strncat(buf, "/", l);
-      }
-      else
-	buf[0]=0;
-      strncat(buf, filename, --l);
-//      printf("_dl_search: %s\n",buf);
-      if ((fd=open(buf,O_RDONLY))!=-1) return fd;
-    }
-  }
-  return -1;
-}
-
-/* parse the SMALL file "conf" for lib directories (aem... hang me if you can :) ) */
-static int _dl_search_conf(char *buf, int len, const char *conf, const char *filename)
-{
-  char ld_so_conf[1024];
-  int i,l,fd=open(conf,O_RDONLY);
-  if (fd!=-1) {
-    l=read(fd,ld_so_conf,sizeof(ld_so_conf)-1);
-    ld_so_conf[sizeof(ld_so_conf)-1]=0;
-    close(fd);
-    if (ld_so_conf[l-1]=='\n') ld_so_conf[--l]=0;
-    for (i=0;i<l;i++) if (ld_so_conf[i]=='\n') ld_so_conf[i]=':';
-    if ((fd=_dl_search_path(buf,len,ld_so_conf,l,filename))!=-1) return fd;
-  }
-  return -1;
-}
-
-int _dl_search(char *buf, int len, const char *filename)
-{
-  int fd;
-
-  /* 1. search the LD_RUN_PATH (from the executable */
-  if (_dl_search_rpath) {
-    if ((fd=_dl_search_path(buf,len,_dl_search_rpath,strlen(_dl_search_rpath),filename))!=-1) return fd;
-  }
-
-  /* 2. IF we have a "secure" enviroment THEN search LD_LIBRARY_PATH */
-  if (getuid()==geteuid()) {
-    char *p=getenv("LD_LIBRARY_PATH");
-    if (p)
-      if ((fd=_dl_search_path(buf,len,p,strlen(p),filename))!=-1) return fd;
-  }
-
-  /* 3. search all pathes in the the /etc/diet.ld.conf, a dietlibc extension :) */
-  if ((fd=_dl_search_conf(buf,len,"/etc/diet.ld.conf",filename))!=-1) return fd;
-
-#ifdef WANT_LD_SO_CONF_SEARCH
-  /* 4. search all pathes in the the /etc/ld.so.conf / can't handle this ...=lib?? crap */
-  if ((fd=_dl_search_conf(buf,len,"/etc/ld.so.conf",filename))!=-1) return fd;
-#endif
-
-  /* default path search */
-  {
-    const char* def_path="/usr/lib:/lib";
-    return _dl_search_path(buf,len,def_path,strlen(def_path),filename);
-  }
-}
diff --git a/mdk-stage1/dietlibc/libdl/dlclose.c b/mdk-stage1/dietlibc/libdl/dlclose.c
deleted file mode 100644
index 384550c47..000000000
--- a/mdk-stage1/dietlibc/libdl/dlclose.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include "_dl_int.h"
-
-int dlclose (void *handle)
-{
-  if (handle) {
-    struct _dl_handle *h = handle;
-    if (h->lnk_count) {
-      --h->lnk_count;
-      return -1;
-    }
-    if (munmap(h->mem_base,h->mem_size)!=0) return -1;
-  }
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libdl/dlerror.c b/mdk-stage1/dietlibc/libdl/dlerror.c
deleted file mode 100644
index 1e31bae54..000000000
--- a/mdk-stage1/dietlibc/libdl/dlerror.c
+++ /dev/null
@@ -1,4 +0,0 @@
-const char *dlerror(void)
-{
-  return "HAE ?!?";
-}
diff --git a/mdk-stage1/dietlibc/libdl/dlopen.c b/mdk-stage1/dietlibc/libdl/dlopen.c
deleted file mode 100644
index 1693d889f..000000000
--- a/mdk-stage1/dietlibc/libdl/dlopen.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <fcntl.h>
-#include <dlfcn.h>
-#include <limits.h>
-
-int _dl_search(char*buf, int bufsize, const char*filename);
-void *_dl_open(const char*pathname, int fd, int flag);
-
-void *dlopen (const char *filename, int flag)
-{
-  int fd;
-  char buf[PATH_MAX];
-  const char *p;
-  if (*filename=='/')
-    fd=open(p=filename,O_RDONLY);
-  else {
-    p=buf;
-    fd=_dl_search(buf,sizeof(buf),filename);
-  }
-
-  return _dl_open(p,fd,flag);
-}
diff --git a/mdk-stage1/dietlibc/libdl/dlsym.c b/mdk-stage1/dietlibc/libdl/dlsym.c
deleted file mode 100644
index 2af940837..000000000
--- a/mdk-stage1/dietlibc/libdl/dlsym.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "_dl_int.h"
-
-void *dlsym(void *handle, char *symbol)
-{
-  printf("dlsym(%08x,%s) -> %08x\n",handle,symbol,elf_hash(symbol)%17);
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libdl/elf_hash.c b/mdk-stage1/dietlibc/libdl/elf_hash.c
deleted file mode 100644
index 463dba0dd..000000000
--- a/mdk-stage1/dietlibc/libdl/elf_hash.c
+++ /dev/null
@@ -1,12 +0,0 @@
-unsigned long elf_hash(const unsigned char *name)
-{
-  unsigned long h=0, g;
-
-  while (*name)
-  {
-    h = (h<<4) + *(name++);
-    if (g = h&0xf0000000) h ^= g>>24;
-    h &= ~g;
-  }
-  return h;
-}
diff --git a/mdk-stage1/dietlibc/liblatin1/latin1-iscntrl.c b/mdk-stage1/dietlibc/liblatin1/latin1-iscntrl.c
deleted file mode 100644
index b0c3605b0..000000000
--- a/mdk-stage1/dietlibc/liblatin1/latin1-iscntrl.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <ctype.h>
-
-int iscntrl(int c) {
-  return (c<32) || (c>=127 && c<=160);
-}
diff --git a/mdk-stage1/dietlibc/liblatin1/latin1-isgraph.c b/mdk-stage1/dietlibc/liblatin1/latin1-isgraph.c
deleted file mode 100644
index c8d4a5df0..000000000
--- a/mdk-stage1/dietlibc/liblatin1/latin1-isgraph.c
+++ /dev/null
@@ -1,4 +0,0 @@
-int isgraph(int c) {
-  return (c>=33 && c<=126) || (c>=161 && c<=255);
-}
-
diff --git a/mdk-stage1/dietlibc/liblatin1/latin1-islower.c b/mdk-stage1/dietlibc/liblatin1/latin1-islower.c
deleted file mode 100644
index cab1a5171..000000000
--- a/mdk-stage1/dietlibc/liblatin1/latin1-islower.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <ctype.h>
-
-int islower(int c) {
-  return (c>='a' && c<='z') || (c>=223 && c<=255 && c!=247);
-}
diff --git a/mdk-stage1/dietlibc/liblatin1/latin1-isprint.c b/mdk-stage1/dietlibc/liblatin1/latin1-isprint.c
deleted file mode 100644
index f632483a0..000000000
--- a/mdk-stage1/dietlibc/liblatin1/latin1-isprint.c
+++ /dev/null
@@ -1,4 +0,0 @@
-
-int isprint(int c) {
-  return (c>=32 && c<=126) || (c>=160 && c<=255);
-}
diff --git a/mdk-stage1/dietlibc/liblatin1/latin1-isupper.c b/mdk-stage1/dietlibc/liblatin1/latin1-isupper.c
deleted file mode 100644
index 1c1d59db8..000000000
--- a/mdk-stage1/dietlibc/liblatin1/latin1-isupper.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <ctype.h>
-
-int isupper(int c) {
-  return (c>='A' && c<='Z') || (c>=192 && c<=222 && c!=215);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/CHANGES b/mdk-stage1/dietlibc/libpthread/CHANGES
deleted file mode 100644
index d39d990ba..000000000
--- a/mdk-stage1/dietlibc/libpthread/CHANGES
+++ /dev/null
@@ -1,45 +0,0 @@
-This is the pthread implementation of dietlibc.
-Written from scratch by Olaf Dreesen.
-
-Thu Apr 12 16:47:12 MEST 2001
-
-  added conditional variables...
-  except pthread_cond_timedwait all should work man-page like
-  pthread_cond_timedwait dosen't handle cancel request according to man-page
-
-  added thread specific key handling (all according to man-page)
-
-Fri Mar 30 18:47:37 MEST 2001
-
-  uff found some logic errors and fixed them.
-  pthread_create had a problem with user provided stacks.
-
-
-Fri Mar 23 14:09:54 MET 2001
-
-  arg.. the kernel-header are so inconsistent...
-  on x86 it works on arm and sparc not due to MISSING defines, miss-places
-  includes and __KERNEL__ checks....
-  the best in this category is that the kernel-header are changed that the
-  buggy (g)libc haven't to change... (f..k glibc, the headers HAVE to be
-  CONSISTENT)
-  a public defined symbol on arch X have to be in Y to unless marked...
-  that is mainly speaking SCHED.H ! arg....
-
-
-Wed Mar 14 04:28:45 MET 2001
-
-  I have implemented the "Manager Thread" so that nested thread creation
-  works. really ugly stuff... don't look at it unless you're sitting on solid
-  ground.
-
-
-Mon Mar 12 16:16:00 CET 2001
-
-  first of all:
-  I strongly suggest NOT to use it yet, it's very, very, ... very
-  experimental. I guess you got the point. there is still much debug code,
-  incomplete functions and unusable states....
-
-  I'm still working on the final alpha...
-
diff --git a/mdk-stage1/dietlibc/libpthread/Makefile b/mdk-stage1/dietlibc/libpthread/Makefile
deleted file mode 100644
index 06420f43a..000000000
--- a/mdk-stage1/dietlibc/libpthread/Makefile
+++ /dev/null
@@ -1,139 +0,0 @@
-all: libpthread.a
-
-ARCH=$(shell uname -m | sed 's/i[4-9]86/i386/')
-
-CFLAGS=-pipe
-CROSS=
-
-CC=gcc
-
-VPATH=../$(ARCH)/
-
-PTHREAD_OBJS = \
-	__testandset.o \
- \
-	thread_internal.o \
-	thread_key.o \
- \
-	pthread_once.o pthread_spinlock.o \
- \
-	pthread_create.o pthread_detach.o \
-	pthread_join.o pthread_self.o \
-	pthread_exit.o \
- \
-	pthread_cleanup_push.o \
-	pthread_cleanup_pop.o \
- \
-	pthread_attr_getdetachstate.o \
-	pthread_attr_getinheritsched.o \
-	pthread_attr_getschedparam.o \
-	pthread_attr_getschedpolicy.o \
-	pthread_attr_getscope.o \
-	pthread_attr_getstackaddr.o \
-	pthread_attr_getstacksize.o \
-	pthread_attr_init.o \
-	pthread_attr_setdetachstate.o \
-	pthread_attr_setinheritsched.o \
-	pthread_attr_setschedparam.o \
-	pthread_attr_setschedpolicy.o \
-	pthread_attr_setscope.o \
-	pthread_attr_setstackaddr.o \
-	pthread_attr_setstacksize.o \
- \
-	pthread_cancel.o pthread_setcancelstate.o \
-	pthread_setcanceltype.o pthread_testcancel.o \
- \
-	pthread_mutex_init.o \
-	pthread_mutex_destroy.o \
-	pthread_mutex_lock.o \
-	pthread_mutex_trylock.o \
-	pthread_mutex_unlock.o \
- \
-	pthread_mutexattr_getkind_np.o \
-	pthread_mutexattr_init.o \
-	pthread_mutexattr_setkind_np.o \
- \
-	pthread_condattr.o \
-	pthread_cond_broadcast.o \
-	pthread_cond_destroy.o \
-	pthread_cond_init.o \
-	pthread_cond_signal.o \
-	pthread_cond_timedwait.o \
-	pthread_cond_wait.o \
- \
-	pthread_key_create.o \
-	pthread_key_delete.o \
-	pthread_getspecific.o \
-	pthread_setspecific.o \
- \
-	pthread_atfork.o \
-	pthread_sys_alloc.o \
-	pthread_sys_close.o \
-	pthread_sys_create.o \
-	pthread_sys_fcntl.o \
-	pthread_sys_fsync.o \
-	pthread_sys_nanosleep.o \
-	pthread_sys_logging.o \
-	pthread_sys_open.o \
-	pthread_sys_pause.o \
-	pthread_sys_read.o \
-	pthread_sys_sigsuspend.o \
-	pthread_sys_tcdrain.o \
-	pthread_sys_waitpid.o \
-	pthread_sys_write.o
-
-%.o : %.c
-	$(CC) $(CFLAGS) -c -o $@ $?
-
-include ../$(ARCH)/Makefile.add
-
-ifeq ($(CFLAGS),-pipe)
-CFLAGS+=-O -fomit-frame-pointer
-endif
-
-#CFLAGS = -g
-CFLAGS += -Wall
-
-CFLAGS += -I.. -I../include -Wall
-
-PWD=$(shell pwd)
-
-.SUFFIXES:
-.SUFFIXES: .S .c
-
-% :: %,v
-
-%.o: %.S
-	$(CROSS)$(CC) -I. -Iinclude $(CFLAGS) -c $<
-
-%.o: %.c
-	$(CROSS)$(CC) -I. -Iinclude $(CFLAGS) -c $<
-#	$(CROSS)strip -x -R .comment -R .note $@
-
-libpthread.a: $(PTHREAD_OBJS)
-	ar cr $@ $^
-
-libpthread.so: libpthread.a
-	$(CROSS)ld -whole-archive -shared -o $@ $^
-
-
-clean:
-	$(RM) *.o *.a *.so *.out *~
-
-exports: libpthread.a
-	nm -g libpthread.a | grep -w T | awk '{ print $$3 }' | sort -u > exports
-
-.PHONY: test.out
-
-test.out: test.o libpthread.a $(LIBS)
-	$(CROSS)$(CC) -g $(CFLAGS) -nostdlib ../bin-$(ARCH)/start.o -o $@ $^ ../bin-$(ARCH)/dietlibc.a -lgcc
-
-
-.PHONY: sparc ppc mips arm alpha i386
-
-sparc ppc alpha i386:
-	$(MAKE) ARCH=$@ CROSS=$@-linux- all t libdietc.so
-
-mips arm:
-	$(MAKE) ARCH=$@ CROSS=$@-linux-gnu- all t libdietc.so
-
diff --git a/mdk-stage1/dietlibc/libpthread/README b/mdk-stage1/dietlibc/libpthread/README
deleted file mode 100644
index 3139c731d..000000000
--- a/mdk-stage1/dietlibc/libpthread/README
+++ /dev/null
@@ -1,42 +0,0 @@
-LIBPTHREAD
-
-  This is the pthread implementation of dietlibc.
-  Written from scratch by Olaf Dreesen.
-
-1. STATUS: incomplete but should work (or not... I had a lot of heisen-bugs...)
-	On non i386 archs the kernel header have major differences...
-	NO workaround yet for this problems...
-
-It's like linuxthreads a clone base thread implementation.
-
-I have implemented a "Manager Thread" with all the pain it involves...
-Nested thread creation is now working fine...
-
-
-2. HOW-TO make this lib:
-
-	1. generate the dietlibc in the parent directory.
-	   and make sure you have WANT_THREAD_SAVE active in the file:
-	   dietfeatures.h
-
-	2. change back here and type make
-
-	and then you should have a libpthread.a
-
-
-3. NOTES
-
-NON STANDARD SIGNAL HANDLING for the threads:
-
-  SIGHUP	the targeted thread is canceled
-	depends on the cancel type of the thread.
-
-	ASYNCHRONOUS: the signal handler will KILL the thread immediately.
-
-	DEFERRED: the signal handler mark its thread as canceled.
-		(only for the sig-handler to do some sane stuff...)
-
-  SIGTERM	the thread is KILLED
-	if the thread signaled is the main thread, then ALL child-threads
-	will get a SIGHUP and after some micros a SIGTERM....
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_atfork.c b/mdk-stage1/dietlibc/libpthread/pthread_atfork.c
deleted file mode 100644
index 2dc612dcc..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_atfork.c
+++ /dev/null
@@ -1,77 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-#define PTHREAD_NUM_ATFORK 4
-
-static struct _pthread_fastlock __atfork_struct_lock;
-static struct {
-  int used;
-  void (*prepare)(void);
-  void (*parent)(void);
-  void (*child)(void);
-} pthread_atfork_buf[PTHREAD_NUM_ATFORK];
-
-int pthread_atfork(void (*prepare)(void),
-		   void (*parent)(void),
-		   void (*child)(void))
-{
-  int i,ret=-1;
-
-  __NO_ASYNC_CANCEL_BEGIN;
-  __pthread_lock(&__atfork_struct_lock);
-
-  for (i=0;i<PTHREAD_NUM_ATFORK; ++i) {
-    if (!(pthread_atfork_buf[i].used)) {
-      pthread_atfork_buf[i].prepare=prepare;
-      pthread_atfork_buf[i].parent=parent;
-      pthread_atfork_buf[i].child=child;
-      ret=0;
-      break;
-    }
-  }
-
-  __pthread_unlock(&__atfork_struct_lock);
-  __NO_ASYNC_CANCEL_END;
-
-  if (ret) (*(__errno_location()))=ENOMEM;
-  return ret;
-}
-
-pid_t fork(void)
-{
-  pid_t pid;
-  int i=PTHREAD_NUM_ATFORK;
-
-  __NO_ASYNC_CANCEL_BEGIN;
-
-  __TEST_CANCEL();
-  __pthread_lock(&__atfork_struct_lock);
-
-  while (i) {
-    if (pthread_atfork_buf[--i].used)
-      if (pthread_atfork_buf[i].prepare)
-	pthread_atfork_buf[i].prepare();
-  }
-
-  pid=__libc_fork();
-
-  if (pid>0) {		/* parent */
-    for (i=0;i<PTHREAD_NUM_ATFORK;++i)
-      if (pthread_atfork_buf[i].used)
-	if (pthread_atfork_buf[i].parent)
-	  pthread_atfork_buf[i].parent();
-  } else if (pid==0) {	/* child */
-    for (i=0;i<PTHREAD_NUM_ATFORK;++i)
-      if (pthread_atfork_buf[i].used)
-	if (pthread_atfork_buf[i].child)
-	  pthread_atfork_buf[i].child();
-  }
-
-  __pthread_unlock(&__atfork_struct_lock);
-  __NO_ASYNC_CANCEL_END;
-
-  return pid;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_getdetachstate.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_getdetachstate.c
deleted file mode 100644
index ccdfc0e47..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_getdetachstate.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_getdetachstate(const pthread_attr_t *attr, int *detachstate)
-{
-  __THREAD_INIT();
-
-  *detachstate=attr->__detachstate;
-  return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_getinheritsched.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_getinheritsched.c
deleted file mode 100644
index 314fd8ade..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_getinheritsched.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_getinheritsched(const pthread_attr_t *attr, int *inherit)
-{
-  __THREAD_INIT();
-
-  *inherit = attr->__inheritsched;
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_getschedparam.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_getschedparam.c
deleted file mode 100644
index f0a9a07d1..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_getschedparam.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_getschedparam(const pthread_attr_t *attr, struct sched_param *param)
-{
-  __THREAD_INIT();
-
-  param->sched_priority=attr->__schedparam.sched_priority;
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_getschedpolicy.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_getschedpolicy.c
deleted file mode 100644
index 53f1bed8c..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_getschedpolicy.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_getschedpolicy(const pthread_attr_t *attr, int *policy)
-{
-  __THREAD_INIT();
-
-  *policy = attr->__schedpolicy;
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_getscope.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_getscope.c
deleted file mode 100644
index 99a33110d..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_getscope.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_getscope(const pthread_attr_t *attr, int *scope)
-{
-  __THREAD_INIT();
-
-  *scope=PTHREAD_SCOPE_SYSTEM;
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_getstackaddr.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_getstackaddr.c
deleted file mode 100644
index d71421901..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_getstackaddr.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_getstackaddr(pthread_attr_t *attr, void **stack)
-{
-  __THREAD_INIT();
-
-  *stack=attr->__stackaddr;
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_getstacksize.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_getstacksize.c
deleted file mode 100644
index 4785979a0..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_getstacksize.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_getstacksize(pthread_attr_t *attr, size_t *stacksize)
-{
-  __THREAD_INIT();
-
-  *stacksize=attr->__stacksize;
-  return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_init.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_init.c
deleted file mode 100644
index 726e88fe5..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_init.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_init(pthread_attr_t *attr)
-{
-  __THREAD_INIT();
-
-  memset(attr,0,sizeof(pthread_attr_t));
-  attr->__stacksize=PTHREAD_STACK_SIZE;
-  return 0;
-}
-
-int pthread_attr_destroy(pthread_attr_t *attr) __attribute__((alias("pthread_attr_init")));
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_setdetachstate.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_setdetachstate.c
deleted file mode 100644
index 690ad5f8e..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_setdetachstate.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_setdetachstate(pthread_attr_t *attr, int detachstate)
-{
-  __THREAD_INIT();
-
-  if ((detachstate == PTHREAD_CREATE_JOINABLE) ||
-      (detachstate == PTHREAD_CREATE_DETACHED)) {
-    attr->__detachstate=detachstate;
-    return 0;
-  }
-  (*(__errno_location()))=EINVAL;
-  return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_setinheritsched.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_setinheritsched.c
deleted file mode 100644
index f38e6e35e..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_setinheritsched.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_setinheritsched(pthread_attr_t *attr, int inherit)
-{
-  __THREAD_INIT();
-
-  if ((inherit==PTHREAD_INHERIT_SCHED) ||
-      (inherit==PTHREAD_EXPLICIT_SCHED)) {
-    attr->__inheritsched=inherit;
-    return 0;
-  }
-  (*(__errno_location()))=EINVAL;
-  return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_setschedparam.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_setschedparam.c
deleted file mode 100644
index 833c0111b..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_setschedparam.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_setschedparam(pthread_attr_t *attr, const struct sched_param *param)
-{
-  __THREAD_INIT();
-
-  if ((attr->__schedpolicy == SCHED_OTHER) && (param->sched_priority == 0)) {
-    attr->__schedparam.sched_priority=0;
-    return 0;
-  }
-  if (((attr->__schedpolicy == SCHED_RR) || (attr->__schedpolicy == SCHED_RR))
-      && ((param->sched_priority > 0) && (param->sched_priority < 100))) {
-    attr->__schedparam.sched_priority=param->sched_priority;
-    return 0;
-  }
-  (*(__errno_location()))=EINVAL;
-  return -1;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_setschedpolicy.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_setschedpolicy.c
deleted file mode 100644
index e845bca32..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_setschedpolicy.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_setschedpolicy(pthread_attr_t *attr, int policy)
-{
-  __THREAD_INIT();
-
-  if (policy==SCHED_OTHER) {
-    attr->__schedpolicy=policy;
-    return 0;
-  }
-  if ((policy==SCHED_FIFO) || (policy==SCHED_RR)) {
-    if (geteuid()==0) {
-      attr->__schedpolicy=policy;
-      return 0;
-    }
-    (*(__errno_location()))=ENOTSUP;
-  }
-  else
-    (*(__errno_location()))=EINVAL;
-  return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_setscope.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_setscope.c
deleted file mode 100644
index 39088c9b2..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_setscope.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_setscope(pthread_attr_t *attr, int scope)
-{
-  __THREAD_INIT();
-
-  if (scope==PTHREAD_SCOPE_SYSTEM) return 0;
-
-  if (scope==PTHREAD_SCOPE_PROCESS)
-    (*(__errno_location()))=ENOTSUP;
-  else
-    (*(__errno_location()))=EINVAL;
-  return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_setstackaddr.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_setstackaddr.c
deleted file mode 100644
index 4b320cd9d..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_setstackaddr.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_setstackaddr(pthread_attr_t *attr, void *stack)
-{
-  __THREAD_INIT();
-
-  attr->__stackaddr=stack;
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_setstacksize.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_setstacksize.c
deleted file mode 100644
index cfbab7747..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_setstacksize.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_setstacksize(pthread_attr_t *attr, size_t stacksize)
-{
-  __THREAD_INIT();
-
-  if (stacksize>=PTHREAD_STACK_SIZE) {
-    attr->__stacksize=stacksize;
-    return 0;
-  }
-  (*(__errno_location()))=EINVAL;
-  return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cancel.c b/mdk-stage1/dietlibc/libpthread/pthread_cancel.c
deleted file mode 100644
index 4c87a3ed1..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cancel.c
+++ /dev/null
@@ -1,35 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_cancel(pthread_t th)
-{
-  pthread_t j;
-  _pthread_descr thread;
-
-  __THREAD_INIT();
-
-  j=__find_thread_id(th);
-
-  if (j==-1) {
-    (*(__errno_location()))=ESRCH;
-    return -1;
-  }
-  thread = __get_thread_struct(j);
-
-  if (thread==0) {
-    (*(__errno_location()))=ESRCH;
-    return -1;
-  }
-
-  if (thread->cancelstate!=PTHREAD_CANCEL_DISABLE) {
-    thread->canceled=1;
-    if (thread->canceltype!=PTHREAD_CANCEL_DEFERRED) {
-      kill(thread->pid,SIGHUP);
-    }
-  }
-
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cleanup_pop.c b/mdk-stage1/dietlibc/libpthread/pthread_cleanup_pop.c
deleted file mode 100644
index 641bb6083..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cleanup_pop.c
+++ /dev/null
@@ -1,27 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-void pthread_cleanup_pop(int execute)
-{
-  _pthread_descr this;
-  struct thread_cleanup_t tmp;
-  int i=PTHREAD_MAX_CLEANUP;
-
-  __THREAD_INIT();
-
-  this = __thread_self();
-
-  while(i>0) {
-    if (this->cleanup_stack[--i].func) {
-      tmp.func=this->cleanup_stack[i].func;
-      tmp.arg=this->cleanup_stack[i].arg;
-      this->cleanup_stack[i].func=0;
-      break;
-    }
-  }
-
-  if (execute) tmp.func(tmp.arg);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cleanup_push.c b/mdk-stage1/dietlibc/libpthread/pthread_cleanup_push.c
deleted file mode 100644
index cd2aabf71..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cleanup_push.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-void pthread_cleanup_push(void (*func)(void*), void *arg)
-{
-  _pthread_descr this;
-  int i;
-
-  __THREAD_INIT();
-
-  this = __thread_self();
-
-  for (i=0; i<PTHREAD_MAX_CLEANUP; ++i) {
-    if (this->cleanup_stack[i].func==0) {
-      this->cleanup_stack[i].func=func;
-      this->cleanup_stack[i].arg=arg;
-      break;
-    }
-  }
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cond_broadcast.c b/mdk-stage1/dietlibc/libpthread/pthread_cond_broadcast.c
deleted file mode 100644
index d3c2274f3..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cond_broadcast.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_cond_broadcast(pthread_cond_t *cond)
-{
-  _pthread_descr tmp;
-
-  __THREAD_INIT();
-
-  __pthread_lock(&(cond->lock));
-  while ((tmp=cond->wait_chain)) {
-    cond->wait_chain=tmp->waitnext;
-    tmp->waitnext=0;
-    tmp->waiting=0;
-  }
-  __pthread_unlock(&(cond->lock));
-
-  return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cond_destroy.c b/mdk-stage1/dietlibc/libpthread/pthread_cond_destroy.c
deleted file mode 100644
index 9a6cc4f0b..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cond_destroy.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_cond_destroy(pthread_cond_t *cond)
-{
-  __THREAD_INIT();
-
-  if (cond->wait_chain) {
-    (*__errno_location())=EBUSY;
-    return 1;
-  }
-
-  memset(cond,0,sizeof(pthread_cond_t));
-  return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cond_init.c b/mdk-stage1/dietlibc/libpthread/pthread_cond_init.c
deleted file mode 100644
index 20b38bef2..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cond_init.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_cond_init(pthread_cond_t *cond, pthread_condattr_t *cond_attr)
-{
-  __THREAD_INIT();
-
-  memset(cond,0,sizeof(pthread_cond_t));
-  return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cond_signal.c b/mdk-stage1/dietlibc/libpthread/pthread_cond_signal.c
deleted file mode 100644
index 60bf2119c..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cond_signal.c
+++ /dev/null
@@ -1,24 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_cond_signal(pthread_cond_t *cond)
-{
-  _pthread_descr tmp=0;
-
-  __THREAD_INIT();
-
-  __pthread_lock(&(cond->lock));
-  if ((tmp=cond->wait_chain)) cond->wait_chain=tmp->waitnext;
-  __pthread_unlock(&(cond->lock));
-
-  if (tmp) {
-    tmp->waitnext=0;
-    tmp->waiting=0;
-  }
-
-  return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cond_timedwait.c b/mdk-stage1/dietlibc/libpthread/pthread_cond_timedwait.c
deleted file mode 100644
index 6613f2ca9..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cond_timedwait.c
+++ /dev/null
@@ -1,43 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_cond_timedwait(pthread_cond_t *cond, pthread_mutex_t *mutex,
-			   const struct timespec *abstime)
-{
-  _pthread_descr tmp;
-  _pthread_descr this;
-  int ret;
-
-  __THREAD_INIT();
-
-  this=__thread_self();
-
-  /* put in wait-chain */
-  __pthread_lock(&(cond->lock));
-  this->waiting=1;
-  if (cond->wait_chain) {
-    for(tmp=cond->wait_chain;tmp->waitnext;tmp=tmp->waitnext);
-    tmp->waitnext=this;
-  } else cond->wait_chain=this;
-  __pthread_unlock(&(cond->lock));
-
-  /* Aeh yeah / wait till signal */
-  pthread_mutex_unlock(mutex);
-  ret=nanosleep(abstime,0);
-  pthread_mutex_lock(mutex);
-
-  __TEST_CANCEL();
-
-  if (ret) {
-    if ((*__errno_location())!=EINTR) return -1;
-    return 0;
-  }
-
-  (*__errno_location())=ETIMEDOUT;
-  return -1;
-}
-
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cond_wait.c b/mdk-stage1/dietlibc/libpthread/pthread_cond_wait.c
deleted file mode 100644
index 0c6c0ae13..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cond_wait.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_cond_wait(pthread_cond_t *cond, pthread_mutex_t *mutex)
-{
-  _pthread_descr tmp;
-  _pthread_descr this;
-
-  __THREAD_INIT();
-
-  this=__thread_self();
-
-  /* put in wait-chain */
-  __pthread_lock(&(cond->lock));
-  this->waiting=1;
-  if (cond->wait_chain) {
-    for(tmp=cond->wait_chain;tmp->waitnext;tmp=tmp->waitnext);
-    tmp->waitnext=this;
-  } else cond->wait_chain=this;
-  __pthread_unlock(&(cond->lock));
-
-  /* Aeh yeah / wait till signal */
-  pthread_mutex_unlock(mutex);
-  while (this->waiting) {
-    __thread_wait_some_time();
-    if (this->canceled) this->waiting=0;	/* we got a cancel signal */
-  }
-  pthread_mutex_lock(mutex);
-
-  __TEST_CANCEL();
-  return 0;
-}
-
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_condattr.c b/mdk-stage1/dietlibc/libpthread/pthread_condattr.c
deleted file mode 100644
index c537890ba..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_condattr.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <pthread.h>
-
-int pthread_condattr_init(pthread_condattr_t *attr)
-{
-  return 0;
-}
-
-int pthread_condattr_destroy(pthread_condattr_t *attr)
-__attribute__((alias("pthread_condattr_init")));
-
-int pthread_condattr_getpshared(const pthread_condattr_t *attr, int *pshared)
-__attribute__((alias("pthread_condattr_init")));
-
-int pthread_condattr_setpshared(pthread_condattr_t *attr, int pshared)
-__attribute__((alias("pthread_condattr_init")));
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_create.c b/mdk-stage1/dietlibc/libpthread/pthread_create.c
deleted file mode 100644
index b4a499081..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_create.c
+++ /dev/null
@@ -1,76 +0,0 @@
-#include <unistd.h>
-#include <stdlib.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_create (pthread_t *thread, const pthread_attr_t *attr,
-		void *(*start_routine) (void *), void *arg)
-{
-  int ret=0;
-  _pthread_descr td;
-  pthread_attr_t default_attr;
-
-  __THREAD_INIT();
-
-  if (start_routine==0) {
-    (*(__errno_location()))=EINVAL;
-    return -1;
-  }
-
-  td = __thread_get_free();
-
-  if (td) {
-    if (!(attr)) {
-      pthread_attr_init(&default_attr);
-      attr=&default_attr;
-    }
-
-    if ((td->policy!=SCHED_OTHER)&&(td->priority==0)) {
-      (*(__errno_location()))=EINVAL;
-      return -1;
-    }
-
-    if (attr->__inheritsched==PTHREAD_INHERIT_SCHED) {
-      _pthread_descr this = __thread_self();
-      td->policy	= this->policy;
-      td->priority	= this->priority;
-    } else {
-      td->policy	= attr->__schedpolicy;
-      td->priority	= attr->__schedparam.sched_priority;
-    }
-
-    td->func		= start_routine;
-    td->arg		= arg;
-
-    td->detached	= attr->__detachstate;
-
-    td->stack_size	= attr->__stacksize;
-
-    if (!(td->stack_addr)) {
-      char *stack=(char*)malloc(td->stack_size);
-      if (!(stack)) {
-	(*(__errno_location()))=EINVAL;
-	return -1;
-      }
-      td->stack_begin	= stack;
-      td->stack_addr	= stack+td->stack_size;
-    } else {
-      td->stack_begin	= 0;
-      td->stack_addr	= attr->__stackaddr;
-    }
-
-    ret = signal_manager_thread(td);
-
-    if (ret>1)
-      *thread=ret;
-    else
-      __thread_cleanup(td);
-  }
-  else
-    (*(__errno_location()))=EAGAIN;
-
-  if (ret<2) return -1;
-  return ret;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_detach.c b/mdk-stage1/dietlibc/libpthread/pthread_detach.c
deleted file mode 100644
index c07280389..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_detach.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_detach(pthread_t th)
-{
-  pthread_t j;
-  _pthread_descr thread;
-
-  __THREAD_INIT();
-
-  j=__find_thread_id(th);
-
-  if (j==-1) {
-    (*(__errno_location()))=ESRCH;
-    return -1;
-  }
-  thread = __get_thread_struct(j);
-
-  if (thread==0) {
-    (*(__errno_location()))=ESRCH;
-    return -1;
-  }
-
-  if (thread->detached) {
-    (*(__errno_location()))=EINVAL;
-    return -1;
-  }
-
-  if (!thread->joined) {
-    thread->detached=1;
-  }
-
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_exit.c b/mdk-stage1/dietlibc/libpthread/pthread_exit.c
deleted file mode 100644
index 41eac0a33..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_exit.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-void pthread_exit(void *retval)
-{
-  _pthread_descr this;
-
-  __THREAD_INIT();
-
-  this = __thread_self();
-  this->retval = retval;
-
-  longjmp(this->jmp_exit,1);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_getspecific.c b/mdk-stage1/dietlibc/libpthread/pthread_getspecific.c
deleted file mode 100644
index c2f84c814..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_getspecific.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-extern struct _thread_key __thread_keys[PTHREAD_KEYS_MAX];
-const void *pthread_getspecific(pthread_key_t key)
-{
-  int id;
-  __THREAD_INIT();
-
-  id=__find_thread_id(getpid());
-
-  if ((key<PTHREAD_KEYS_MAX) && (__thread_keys[key].used)) {
-    return __thread_keys[key].tkd[id];
-  }
-  return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_join.c b/mdk-stage1/dietlibc/libpthread/pthread_join.c
deleted file mode 100644
index 5b295bad1..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_join.c
+++ /dev/null
@@ -1,50 +0,0 @@
-#include <unistd.h>
-#include <stdlib.h>
-#include <errno.h>
-
-#include "thread_internal.h"
-#include <pthread.h>
-
-int pthread_join(pthread_t th, void **thread_return)
-{
-  pthread_t j;
-  _pthread_descr this, thread;
-
-  __THREAD_INIT();
-
-  this = __thread_self();
-  j=__find_thread_id(th);
-
-  if (j==-1) {
-    (*(__errno_location()))=ESRCH;
-    return -1;
-  }
-
-  thread = __get_thread_struct(j);
-
-  /* error handling */
-  if (thread==0) {
-    (*(__errno_location()))=ESRCH;
-    return -1;
-  }
-
-  if (this==thread) {
-    (*(__errno_location()))=EDEADLK;
-    return -1;
-  }
-
-  if (thread->detached || thread->joined) {
-    (*(__errno_location()))=EINVAL;
-    return -1;
-  }
-
-  thread->joined=this;
-  this->join=1;
-
-  while(this->join) __thread_wait_some_time();
-
-  if (thread_return) *thread_return=this->retval;
-
-  return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_key_create.c b/mdk-stage1/dietlibc/libpthread/pthread_key_create.c
deleted file mode 100644
index 44fccea6a..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_key_create.c
+++ /dev/null
@@ -1,35 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-extern struct _pthread_fastlock __thread_keys_lock;
-extern struct _thread_key __thread_keys[PTHREAD_KEYS_MAX];
-int pthread_key_create(pthread_key_t *key, void (*destructor)(const void*))
-{
-  int ret=-1,i;
-
-  __THREAD_INIT();
-
-  __NO_ASYNC_CANCEL_BEGIN;
-  __pthread_lock(&__thread_keys_lock);
-
-  for (i=0; i<PTHREAD_KEYS_MAX; i++) {
-    if (!__thread_keys[i].used) {
-      __thread_keys[i].used=1;
-      __thread_keys[i].destructor=destructor;
-      memset(__thread_keys[i].tkd,0,PTHREAD_THREADS_MAX*sizeof(struct _thread_key));
-      *key=i;
-      ret=0;
-      break;
-    }
-  }
-
-  __pthread_unlock(&__thread_keys_lock);
-  __NO_ASYNC_CANCEL_END;
-
-  if (ret) (*__errno_location())=EAGAIN;
-  return ret;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_key_delete.c b/mdk-stage1/dietlibc/libpthread/pthread_key_delete.c
deleted file mode 100644
index b1bc366e2..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_key_delete.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-extern struct _thread_key __thread_keys[PTHREAD_KEYS_MAX];
-int pthread_key_delete(pthread_key_t key)
-{
-  __THREAD_INIT();
-
-  if (key>=PTHREAD_KEYS_MAX) {
-    (*__errno_location())=EINVAL;
-    return -1;
-  }
-
-  __thread_keys[key].used=0;
-
-  return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutex_destroy.c b/mdk-stage1/dietlibc/libpthread/pthread_mutex_destroy.c
deleted file mode 100644
index 33a16abd4..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutex_destroy.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_mutex_destroy(pthread_mutex_t *mutex)
-{
-  __THREAD_INIT();
-
-  if ((mutex->owner)||(mutex->lock.__spinlock)) {
-    (*(__errno_location()))=EBUSY;
-    return -1;
-  }
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutex_init.c b/mdk-stage1/dietlibc/libpthread/pthread_mutex_init.c
deleted file mode 100644
index b1797fb20..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutex_init.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_mutex_init(pthread_mutex_t *mutex,
-			const pthread_mutexattr_t *mutexattr)
-{
-  __THREAD_INIT();
-
-  memset(mutex,0,sizeof(pthread_mutex_t));
-  if (mutexattr) {
-    mutex->kind=mutexattr->__mutexkind;
-  }
-  return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutex_lock.c b/mdk-stage1/dietlibc/libpthread/pthread_mutex_lock.c
deleted file mode 100644
index 0c3ade9e8..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutex_lock.c
+++ /dev/null
@@ -1,33 +0,0 @@
-#include <unistd.h>
-#include <sched.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-/* will never return EINVAL ! */
-
-int pthread_mutex_lock(pthread_mutex_t *mutex)
-{
-  _pthread_descr this;
-
-  __THREAD_INIT();
-
-  this = __thread_self();
-
-  if (this!=mutex->owner) {
-    /* wait for mutex to free */
-    __pthread_lock(&(mutex->lock));
-
-    mutex->owner=this;
-  }
-  else if (mutex->kind==PTHREAD_MUTEX_ERRORCHECK_NP)
-  {
-    (*(__errno_location()))=EDEADLK;
-    return -1;
-  }
-
-  if (mutex->kind==PTHREAD_MUTEX_RECURSIVE_NP) ++(mutex->count);
-
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutex_trylock.c b/mdk-stage1/dietlibc/libpthread/pthread_mutex_trylock.c
deleted file mode 100644
index fcf63f75e..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutex_trylock.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <unistd.h>
-#include <sched.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-/* will never return EINVAL ! */
-
-int pthread_mutex_trylock(pthread_mutex_t *mutex)
-{
-  _pthread_descr this;
-
-  __THREAD_INIT();
-
-  this = __thread_self();
-
-  if (this!=mutex->owner) {
-    /* wait for mutex to free */
-    if (__pthread_trylock(&(mutex->lock))) {
-      (*(__errno_location()))=EBUSY;
-      return -1;
-    }
-
-    mutex->owner=this;
-  }
-  else if (mutex->kind==PTHREAD_MUTEX_ERRORCHECK_NP)
-  {
-    (*(__errno_location()))=EDEADLK;
-    return -1;
-  }
-
-  if (mutex->kind==PTHREAD_MUTEX_RECURSIVE_NP) ++(mutex->count);
-
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutex_unlock.c b/mdk-stage1/dietlibc/libpthread/pthread_mutex_unlock.c
deleted file mode 100644
index 0b5a1d0f7..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutex_unlock.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <unistd.h>
-#include <sched.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-/* will never return EINVAL ! */
-
-int pthread_mutex_unlock(pthread_mutex_t *mutex)
-{
-  _pthread_descr this;
-
-  __THREAD_INIT();
-
-  this = __thread_self();
-
-  if (this==mutex->owner) {
-    if (mutex->kind==PTHREAD_MUTEX_RECURSIVE_NP) {
-      if (--(mutex->count))
-	return 0;
-    }
-
-    mutex->owner=0;
-    __pthread_unlock(&(mutex->lock));
-  }
-  else if (mutex->kind==PTHREAD_MUTEX_ERRORCHECK_NP)
-  {
-    (*(__errno_location()))=EPERM;
-    return -1;
-  }
-
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_getkind_np.c b/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_getkind_np.c
deleted file mode 100644
index 63cd9133c..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_getkind_np.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_mutexattr_getkind_np(const pthread_mutexattr_t *attr, int *kind)
-{
-  __THREAD_INIT();
-
-  *kind=attr->__mutexkind;
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_init.c b/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_init.c
deleted file mode 100644
index ff60e4c74..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_init.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_mutexattr_init(pthread_mutexattr_t *attr)
-{
-  __THREAD_INIT();
-
-  attr->__mutexkind = 0;
-  return 0;
-}
-
-int pthread_mutexattr_destroy(pthread_mutexattr_t *attr) __attribute__((alias ("pthread_mutexattr_init")));
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_setkind_np.c b/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_setkind_np.c
deleted file mode 100644
index ac600f8ed..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_setkind_np.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_mutexattr_setkind_np(pthread_mutexattr_t *attr, int kind)
-{
-  __THREAD_INIT();
-
-  if ((kind==PTHREAD_MUTEX_FAST_NP) || (kind==PTHREAD_MUTEX_RECURSIVE_NP) ||
-      (kind==PTHREAD_MUTEX_ERRORCHECK_NP)) {
-    attr->__mutexkind=kind;
-    return 0;
-  }
-  (*(__errno_location()))=EINVAL;
-  return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_once.c b/mdk-stage1/dietlibc/libpthread/pthread_once.c
deleted file mode 100644
index 16d9cb392..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_once.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <pthread.h>
-#include "thread_internal.h"
-
-int __pthread_once (pthread_once_t* once_control, void (*init_routine)(void))
-{
-  if (!(__testandset(once_control))) init_routine();
-  return 0;
-}
-int pthread_once (pthread_once_t* once_control, void (*init_routine)(void)) __attribute__((alias("__pthread_once")));
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_self.c b/mdk-stage1/dietlibc/libpthread/pthread_self.c
deleted file mode 100644
index 394686dd4..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_self.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <unistd.h>
-#include <pthread.h>
-
-pthread_t pthread_self() { return getpid(); }
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_setcancelstate.c b/mdk-stage1/dietlibc/libpthread/pthread_setcancelstate.c
deleted file mode 100644
index b906492fb..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_setcancelstate.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_setcancelstate(int state, int *oldstate)
-{
-  _pthread_descr thread;
-
-  __THREAD_INIT();
-
-  if ((state==PTHREAD_CANCEL_ENABLE) || (state==PTHREAD_CANCEL_DISABLE))
-  {
-    thread = __thread_self();
-
-    if (oldstate) *oldstate = thread->cancelstate;
-    thread->cancelstate = state;
-
-    return 0;
-  }
-
-  (*(__errno_location()))=EINVAL;
-  return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_setcanceltype.c b/mdk-stage1/dietlibc/libpthread/pthread_setcanceltype.c
deleted file mode 100644
index 03d1f53de..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_setcanceltype.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_setcanceltype(int type, int *oldtype)
-{
-  _pthread_descr thread;
-
-  __THREAD_INIT();
-
-  if ((type==PTHREAD_CANCEL_DEFERRED) || (type==PTHREAD_CANCEL_ASYNCHRONOUS))
-  {
-    thread = __thread_self();
-
-    if (oldtype) *oldtype = thread->canceltype;
-    thread->canceltype = type;
-
-    return 0;
-  }
-
-  (*(__errno_location()))=EINVAL;
-  return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_setspecific.c b/mdk-stage1/dietlibc/libpthread/pthread_setspecific.c
deleted file mode 100644
index 78339c20b..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_setspecific.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-extern struct _thread_key __thread_keys[PTHREAD_KEYS_MAX];
-int pthread_setspecific(pthread_key_t key, const void *value)
-{
-  int id;
-  __THREAD_INIT();
-
-  id=__find_thread_id(getpid());
-  if ((key<PTHREAD_KEYS_MAX) && (__thread_keys[key].used)) {
-    __thread_keys[key].tkd[id]=value;
-    return 0;
-  }
-  (*__errno_location())=EINVAL;
-  return -1;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_spinlock.c b/mdk-stage1/dietlibc/libpthread/pthread_spinlock.c
deleted file mode 100644
index 449782adf..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_spinlock.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include <time.h>
-#include <pthread.h>
-#include "thread_internal.h"
-
-static void __pthread_acquire(int * spinlock)
-{
-  int cnt = 0;
-  struct timespec tm;
-
-  while (__testandset(spinlock)) {
-    if (cnt < MAX_SPIN_COUNT) {
-      sched_yield();
-      cnt++;
-    } else {
-      tm.tv_sec = 0;
-      tm.tv_nsec = SPIN_SLEEP_DURATION;
-      __libc_nanosleep(&tm, 0);
-      cnt = 0;
-    }
-  }
-}
-
-void __pthread_lock(struct _pthread_fastlock * lock)
-{
-  __pthread_acquire(&lock->__spinlock);
-}
-
-int __pthread_trylock(struct _pthread_fastlock * lock)
-{
-  return __testandset(&lock->__spinlock);
-}
-
-int __pthread_unlock(struct _pthread_fastlock * lock)
-{
-  return (lock->__spinlock = 0);
-}
-
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_alloc.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_alloc.c
deleted file mode 100644
index 9f7d23d79..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_alloc.c
+++ /dev/null
@@ -1,26 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-static pthread_mutex_t mutex_alloc = PTHREAD_MUTEX_INITIALIZER;
-
-void free(void *ptr)
-{
-  __NO_ASYNC_CANCEL_BEGIN;
-  pthread_mutex_lock(&mutex_alloc);
-  __libc_free(ptr);
-  pthread_mutex_unlock(&mutex_alloc);
-  __NO_ASYNC_CANCEL_END;
-}
-
-void *malloc(size_t size)
-{
-  register void *ret;
-  __NO_ASYNC_CANCEL_BEGIN;
-  pthread_mutex_lock(&mutex_alloc);
-  ret=__libc_malloc(size);
-  pthread_mutex_unlock(&mutex_alloc);
-  __NO_ASYNC_CANCEL_END;
-  return ret;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_close.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_close.c
deleted file mode 100644
index 84d5d5f36..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_close.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int close(int fd)
-{
-  __TEST_CANCEL();
-  return __libc_close(fd);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_create.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_create.c
deleted file mode 100644
index 9d47844f5..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_create.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int creat(const char *pathname, mode_t mode)
-{
-  __TEST_CANCEL();
-  return __libc_creat(pathname,mode);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_fcntl.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_fcntl.c
deleted file mode 100644
index 99210a488..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_fcntl.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int fcntl(int fd, int cmd, void *arg)
-{
-  __TEST_CANCEL();
-  return __libc_fcntl(fd,cmd,arg);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_fsync.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_fsync.c
deleted file mode 100644
index a2c995069..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_fsync.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int fsync(int fd)
-{
-  __TEST_CANCEL();
-  return __libc_fsync(fd);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_logging.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_logging.c
deleted file mode 100644
index 6070ad219..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_logging.c
+++ /dev/null
@@ -1,31 +0,0 @@
-#include <unistd.h>
-#include <stdarg.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-static pthread_mutex_t mutex_syslog = PTHREAD_MUTEX_INITIALIZER;
-
-void closelog(void)
-{
-  pthread_cleanup_push((void(*)(void*))pthread_mutex_unlock,&mutex_syslog);
-  pthread_mutex_lock(&mutex_syslog);
-  __libc_closelog();
-  pthread_cleanup_pop(1);
-}
-
-void openlog(const char *ident, int option, int facility)
-{
-  pthread_cleanup_push((void(*)(void*))pthread_mutex_unlock,&mutex_syslog);
-  pthread_mutex_lock(&mutex_syslog);
-  __libc_openlog(ident, option, facility);
-  pthread_cleanup_pop(1);
-}
-
-void vsyslog(int priority, const char *format, va_list arg_ptr)
-{
-  pthread_cleanup_push((void(*)(void*))pthread_mutex_unlock,&mutex_syslog);
-  pthread_mutex_lock(&mutex_syslog);
-  __libc_vsyslog(priority, format, arg_ptr);
-  pthread_cleanup_pop(1);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_nanosleep.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_nanosleep.c
deleted file mode 100644
index 699de4654..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_nanosleep.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <time.h>
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int nanosleep(const struct timespec *req, struct timespec *rem)
-{
-  __TEST_CANCEL();
-  return __libc_nanosleep(req,rem);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_open.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_open.c
deleted file mode 100644
index 513f6a323..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_open.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int __pthread_open(const char *pathname, int flags, mode_t mode)
-{
-  __TEST_CANCEL();
-  return __libc_open(pathname,flags,mode);
-}
-
-int open(const char *pathname, int flags, ...) __attribute__((alias("__pthread_open")));
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_pause.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_pause.c
deleted file mode 100644
index ab15ead11..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_pause.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pause()
-{
-  __TEST_CANCEL();
-  return __libc_pause();
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_read.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_read.c
deleted file mode 100644
index 60f886003..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_read.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int read(int fd, void *buf, size_t count)
-{
-  __TEST_CANCEL();
-  return __libc_read(fd,buf,count);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_sigsuspend.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_sigsuspend.c
deleted file mode 100644
index 72cd783ae..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_sigsuspend.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int sigsuspend(const sigset_t *mask)
-{
-  __TEST_CANCEL();
-  return __libc_sigsuspend(mask);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_tcdrain.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_tcdrain.c
deleted file mode 100644
index 1ac33adfc..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_tcdrain.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int tcdrain(int fd)
-{
-  __TEST_CANCEL();
-  return __libc_tcdrain(fd);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_waitpid.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_waitpid.c
deleted file mode 100644
index 76d5ddca7..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_waitpid.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-pid_t waitpid(pid_t pid, int *status, int options)
-{
-  __TEST_CANCEL();
-  return __libc_waitpid(pid,status,options);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_write.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_write.c
deleted file mode 100644
index 37541ae42..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_write.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int write(int fd, const void *buf, size_t count)
-{
-  __TEST_CANCEL();
-  return __libc_write(fd,buf,count);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_testcancel.c b/mdk-stage1/dietlibc/libpthread/pthread_testcancel.c
deleted file mode 100644
index 68f91e743..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_testcancel.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-void pthread_testcancel()
-{
-  _pthread_descr thread;
-  __THREAD_INIT();
-
-  thread=__thread_self();
-
-  if (thread->canceled) {
-    pthread_exit(PTHREAD_CANCELED);
-  }
-}
diff --git a/mdk-stage1/dietlibc/libpthread/test.c b/mdk-stage1/dietlibc/libpthread/test.c
deleted file mode 100644
index 3272c1753..000000000
--- a/mdk-stage1/dietlibc/libpthread/test.c
+++ /dev/null
@@ -1,72 +0,0 @@
-#include <stdio.h>
-#include <pthread.h>
-
-#include <unistd.h>
-#include <signal.h>
-
-#include <errno.h>
-
-int ra;
-
-void test(int sig)
-{
-  printf("SIGNAL %d in %d\n",sig,getpid());
-  fflush(stdout);
-  signal(SIGHUP, test);
-}
-
-void* thread(void* arg)
-{
-  int i;
-  for (i=0;i<10; i++)
-  {
-    printf("child %ld %8p\n", pthread_self(),arg);
-    sleep(1);
-  }
-  return arg;
-}
-
-void* thread2(void *arg)
-{
-  pthread_t t;
-  int i;
-
-  printf("child %ld %8p\n", pthread_self(),arg);
-  for (i=0; i<3; ++i) {
-    printf("child starting next in %d secs %ld %8p\n", 3-i, pthread_self(),arg);
-    sleep(1);
-  }
-  pthread_create(&t,0, thread, (void*)2);
-  printf("new child @ %ld\n",t);
-  return (void*)t;
-}
-
-int main(int argc, char*argv[])
-{
-  pthread_t t;
-
-  signal(SIGHUP, test);
-
-  pthread_create(&t,0, thread2, 0);
-  pthread_create(&t,0, thread, (void *)3);
-  pthread_create(&t,0, thread, (void *)1);
-
-  puts("main");
-
-#if 0
-  {
-    int i;
-    for(i=0;i<4;i++) sleep(1);
-  }
-#else
-  {
-    int *tt;
-    int i = pthread_join(t,(void*)&tt);
-    printf("join %d %p %d\n",i,tt,(*(__errno_location())));
-  }
-#endif
-
-  puts("main exit");
-
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/thread_internal.c b/mdk-stage1/dietlibc/libpthread/thread_internal.c
deleted file mode 100644
index a93806203..000000000
--- a/mdk-stage1/dietlibc/libpthread/thread_internal.c
+++ /dev/null
@@ -1,344 +0,0 @@
-#include <signal.h>
-#include <string.h>
-#include <sys/wait.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <errno.h>
-
-#include <sched.h>
-#include <sys/resource.h>
-
-#include <stdio.h>
-#include "thread_internal.h"
-
-static struct _pthread_fastlock __thread_struct_lock = {0};
-static struct _pthread_descr_struct threads[PTHREAD_THREADS_MAX];
-static int _max_used_thread_id=1;
-pthread_once_t __thread_inited;
-
-static struct _pthread_fastlock __manager_thread_signal_lock = {0};
-static struct _pthread_fastlock __manager_thread_data_lock = {1};
-static struct _pthread_fastlock __manager_thread_data_go_lock = {1};
-
-//#define DEBUG
-
-/* find thread */
-int __find_thread_id(int pid)
-{
-  register int i;
-  for (i=0; i<_max_used_thread_id; i++)
-    if (threads[i].pid==pid)
-      return i;
-  return -1;
-}
-
-/* get thread */
-_pthread_descr __get_thread_struct(int id)
-{
-  return threads+id;
-}
-
-/* thread errno location */
-int *__errno_location(void)
-{
-  int id=0;
-  if (__thread_inited) id=__find_thread_id(getpid());
-  if (id<0)
-    return 0;
-  else
-    return &threads[id].errno;
-}
-
-/* thread self */
-_pthread_descr __thread_self()
-{
-  register int i=__find_thread_id(getpid());
-  if (i<0)
-    return 0;
-  else
-    return threads+i;
-}
-
-/* allocate a thread slot */
-_pthread_descr __thread_get_free()
-{
-  _pthread_descr ret=0;
-  int i;
-
-  __NO_ASYNC_CANCEL_BEGIN;
-  __pthread_lock(&__thread_struct_lock);
-
-  for (i=0; i<PTHREAD_THREADS_MAX; i++) {
-    if (threads[i].pid==0) {
-      threads[i].pid=1; /* mark as taken */
-      ret = threads+i;
-      if (i>=_max_used_thread_id) _max_used_thread_id=i+1;
-      break;
-    }
-  }
-
-  __pthread_unlock(&__thread_struct_lock);
-  __NO_ASYNC_CANCEL_END;
-  return ret;
-}
-
-/* sleep a little (reschedule for this time) */
-void __thread_wait_some_time()
-{
-  struct timespec reg;
-  reg.tv_sec=0;
-  reg.tv_nsec=SPIN_SLEEP_DURATION;
-  __libc_nanosleep(&reg,0);
-}
-
-/* cleanup a thread struct */
-void __thread_cleanup(_pthread_descr th)
-{
-  /* lib provided stack should be freed */
-  if (th->stack_begin) free(th->stack_begin);
-
-  /* an other thread has joined this on */
-  if (th->joined) {
-    th->joined->retval=th->retval;
-    th->joined->join=0;
-    th->joined=0;
-  }
-  th->pid=0;	/* mark struct as free */
-}
-
-/* SIGHUP handler (thread cnacel) PTHREAD_CANCEL_ASYNCHRONOUS */
-static void __thread_cancel_handler(int sig)
-{
-  _pthread_descr this;
-  this = __thread_self();
-  this->canceled=1;
-  if (this->canceltype==PTHREAD_CANCEL_ASYNCHRONOUS)
-    pthread_exit(PTHREAD_CANCELED);
-  signal( SIGHUP, __thread_cancel_handler );
-}
-
-/* kill ALL threads / other then prime task and manager thread */
-static void __kill_all_threads()
-{
-  int i;
-
-  for (i=2; i<_max_used_thread_id; i++) {
-    if (threads[i].pid>1) {
-#ifdef DEBUG
-      printf("CANCEL ! %d\n",threads[i].pid);
-#endif
-      threads[i].canceled=1;
-      kill(threads[i].pid, SIGHUP);	/* cancel thread */
-    }
-  }
-
-  __thread_wait_some_time();
-
-  for (i=2; i<_max_used_thread_id; i++) {
-    if (threads[i].pid>1) {
-#ifdef DEBUG
-      printf("KILL ! %d\n",threads[i].pid);
-#endif
-      kill(threads[i].pid, SIGTERM);	/* KILL thread */
-    }
-  }
-}
-
-__attribute__((weak)) volatile void __thread_start__key(int id) { return; }
-__attribute__((weak,alias("__thread_start__key"))) volatile void __thread_exit__key(int id);
-
-/* support for manager */
-static void *__mthread_starter(void *arg)
-{
-  _pthread_descr td = (_pthread_descr)arg;
-  int i = td->stack_size-4096;
-
-  /* just to be sure */
-  td->pid=getpid();
-
-  /* signal handling for a thread */
-  signal(SIGTERM, _exit);
-  signal(SIGCHLD, SIG_DFL);
-  signal(SIGHUP, __thread_cancel_handler );
-
-  /* limit stack so that we NEVER have to worry */
-  setrlimit(RLIMIT_STACK, (struct rlimit *)(&i));
-
-  /* set scheduler */
-  if (td->policy!=SCHED_OTHER) {
-    struct sched_param sp;
-    sp.sched_priority=td->priority;
-    sched_setscheduler(td->pid,td->policy, &sp);
-  }
-
-  /* thread_key glue */
-  __thread_start__key(td-threads);
-
-#ifdef DEBUG
-  printf("in starter %d, parameter %8p\n", td->pid, td->func);
-#endif
-
-  if (!td->canceled) {
-    if (!(setjmp(td->jmp_exit))) {
-      td->retval=td->func(td->arg);
-#ifdef DEBUG
-    } else {
-      printf("pthread_exit called in %d\n", td->pid);
-#endif
-    }
-  }
-  pthread_setcanceltype(PTHREAD_CANCEL_DEFERRED,0);
-
-  /* thread_key glue */
-  __thread_exit__key(td-threads);
-
-#ifdef DEBUG
-  printf("end starter %d, retval %8p\n", td->pid, td->retval);
-#endif
-
-  /* wake joined thread and put retval */
-  if (td->joined) {
-    td->joined->retval=td->retval;
-    td->joined->join=0;
-    td->joined=0;
-  }
-
-  /* execute all functions on the cleanup-stack */
-  for (i=PTHREAD_MAX_CLEANUP;i;) {
-    if (td->cleanup_stack[--i].func) {
-      td->cleanup_stack[i].func(td->cleanup_stack[i].arg);
-    }
-  }
-
-  return 0;
-}
-
-
-/* manager thread and signal handler */
-static char __manager_thread_stack[12*1024];
-static volatile _pthread_descr __manager_thread_data;
-static void __manager_SIGCHLD(int sig)
-{
-  int pid, status, i;
-
-  while(1) {
-    pid = __libc_waitpid (-1, &status, WNOHANG);
-    if (pid <= 0) break;
-
-    for (i=0; i<_max_used_thread_id; i++) {
-      if (threads[i].pid==pid) {
-	__thread_cleanup(threads+i);
-	break;
-      }
-    }
-  }
-}
-
-static void __manager_SIGTERM(int sig)
-{
-  __kill_all_threads();
-  _exit(0);
-}
-
-static void* __manager_thread(void *arg)
-{
-  struct sigaction sig_action_chld;
-  sig_action_chld.sa_handler = __manager_SIGCHLD;
-  sigemptyset(&sig_action_chld.sa_mask);
-  sig_action_chld.sa_flags = SA_RESTART;
-
-  sigaction(SIGCHLD, &sig_action_chld, 0);
-  signal(SIGTERM, __manager_SIGTERM);
-  signal(SIGHUP, SIG_IGN);
-
-  __pthread_unlock(&__manager_thread_data_go_lock);	/* release init */
-  while(1) {
-    do {
-      __thread_wait_some_time();
-      if (getppid()<0) __manager_SIGTERM(0);
-    } while (__pthread_trylock(&__manager_thread_data_lock));
-
-    __manager_thread_data->pid =
-      __clone(__mthread_starter,
-	      __manager_thread_data->stack_addr,
-	      CLONE_VM | CLONE_FS | CLONE_FILES | SIGCHLD,
-	      __manager_thread_data);
-    __thread_wait_some_time();
-#ifdef DEBUG
-    printf("manager new thread %d\n",__manager_thread_data->pid);
-#endif
-    __pthread_unlock(&__manager_thread_data_go_lock);	/* release sender */
-  }
-  return 0;
-}
-
-/* pthread_create bottom half */
-int signal_manager_thread(_pthread_descr td)
-{
-  __NO_ASYNC_CANCEL_BEGIN;
-
-  __pthread_lock(&__manager_thread_signal_lock);	/* lock */
-
-  __manager_thread_data = td;
-  __thread_wait_some_time();
-  __pthread_unlock(&__manager_thread_data_lock);	/* signal manager to start */
-  __thread_wait_some_time();
-  __pthread_lock(&__manager_thread_data_go_lock);	/* wait for manager */
-
-  __pthread_unlock(&__manager_thread_signal_lock);	/* unlock */
-
-  __NO_ASYNC_CANCEL_END;
-
-  return td->pid;
-}
-
-
-/* thread stop */
-static void __thread_main_exit()
-{
-  if (getpid()!=threads[0].pid) {
-#ifdef DEBUG
-    printf("A THREAD ? %d\n",getpid());
-#endif
-    kill(threads[0].pid, SIGTERM);
-    while(1) __thread_wait_some_time();
-  }
-#ifdef DEBUG
-  else
-    printf("EXIT ! %d\n",getpid());
-#endif
-
-  /* stop ALL threads */
-  kill(threads[1].pid, SIGTERM);
-  __thread_wait_some_time();
-  __kill_all_threads();
-}
-
-/* thread intern init */
-void __thread_init()
-{
-  if (atexit(__thread_main_exit)==-1)
-    exit(42);
-
-#ifdef DEBUG
-  printf("INIT ! %d\n",getpid());
-  memset(threads,0,sizeof(threads));
-#endif
-
-  threads[0].pid = getpid();
-
-  ++_max_used_thread_id;
-  threads[1].stack_size=sizeof(__manager_thread_stack);
-  threads[1].stack_addr=&__manager_thread_stack[sizeof(__manager_thread_stack)];
-  threads[1].stack_begin=0;
-  threads[1].func=__manager_thread;
-
-  threads[1].pid = __clone(__mthread_starter, threads[1].stack_addr,
-			   CLONE_VM | CLONE_FS | CLONE_FILES, threads+1);
-
-#ifdef DEBUG
-  printf("manager thread @ : %d\n",threads[1].pid);
-#endif
-  __pthread_lock(&__manager_thread_data_go_lock);	/* wait for manager to be ready */
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/thread_internal.h b/mdk-stage1/dietlibc/libpthread/thread_internal.h
deleted file mode 100644
index 5eb3bbd08..000000000
--- a/mdk-stage1/dietlibc/libpthread/thread_internal.h
+++ /dev/null
@@ -1,131 +0,0 @@
-#ifndef __THREAD_INTERNAL_H__
-#define __THREAD_INTERNAL_H__
-
-#include <pthread.h>
-#include <stdarg.h>
-#include <setjmp.h>
-#include "dietfeatures.h"
-#ifndef WANT_THREAD_SAFE
-#error "the diet libc is not compiled with thread safeness enabled!"
-#endif
-
-/* cleanup */
-#define PTHREAD_MAX_CLEANUP 8
-struct thread_cleanup_t {
-  void (*func)(void*);
-  void *arg;
-};
-
-/* the thread descriptor / internal */
-struct _pthread_descr_struct {
-  /* runtime handling */
-  struct _pthread_descr_struct *joined; /* a joined thread or NULL */
-
-  /* conditional variables */
-  struct _pthread_descr_struct *waitnext; /* an other waiting thread or NULL */
-  int  waiting;			/* internal waiting "lock" */
-
-  /* thread/process data */
-  int  pid;			/* Process id */
-
-  int  policy;			/* thread scheduling policy */
-  int  priority;		/* thread priority */
-
-  /* errno handling */
-  int   errno;
-  int h_errno;
-
-  /* stack handling */
-  unsigned int stack_size;	/* stack size for setrlimit */
-  void *stack_addr;		/* stack address for clone */
-  void *stack_begin;		/* begin of lib-stack / lowest address (free) */
-
-  /* thread exit handling */
-  void  *retval;		/* thread return value */
-  int   join;			/* thread waits for other to return */
-  jmp_buf jmp_exit;		/* pthread_exit jump */
-
-  /* thread flags */
-  int  detached;		/* thread is detached */
-  int  canceled;		/* thread canceled */
-
-  /* cancel handling */
-  int  cancelstate;		/* cancel state */
-  int  canceltype;		/* type of cancellation */
-
-  /* thread basics */
-  void* (*func) (void* arg);	/* thread function */
-  void* arg;			/* thread argument */
-
-  /* create thread / manager thread lock */
-  struct _pthread_fastlock *manager_lock;
-
-  /* cleanup stack */
-  struct thread_cleanup_t cleanup_stack[PTHREAD_MAX_CLEANUP];
-
-} __attribute__ ((aligned(32)));
-
-/* thread keys */
-struct _thread_key {
-  int used;
-  void (*destructor)(const void*);
-  const void *tkd[PTHREAD_THREADS_MAX];
-};
-
-/* internal stuff */
-int __testandset(int *spinlock);
-
-void __pthread_lock(struct _pthread_fastlock * lock);
-int __pthread_trylock(struct _pthread_fastlock * lock);
-int __pthread_unlock(struct _pthread_fastlock * lock);
-
-int __clone(void* (*fn)(void*), void* stack, int flags, void *arg);
-
-int __find_thread_id(int pid);
-_pthread_descr __get_thread_struct(int id);
-
-_pthread_descr __thread_get_free();
-_pthread_descr __thread_self();
-
-void __thread_cleanup(_pthread_descr th);
-
-void __thread_wait_some_time();
-
-#define __NO_ASYNC_CANCEL_BEGIN { int oldtype; pthread_setcanceltype(PTHREAD_CANCEL_DEFERRED, &oldtype);
-#define __NO_ASYNC_CANCEL_END pthread_setcanceltype(oldtype,0); pthread_testcancel(); }
-#define __NO_ASYNC_CANCEL_STOP pthread_setcanceltype(oldtype,0); }
-
-/* manager thread stuff */
-int signal_manager_thread(_pthread_descr td);
-
-/* init stuff */
-extern pthread_once_t __thread_inited;
-void __thread_init();
-#define __THREAD_INIT() __pthread_once(&__thread_inited, __thread_init)
-#define __TEST_CANCEL() pthread_testcancel()
-
-/* diet libc syscalls */
-
-void  __libc_free(void *ptr);
-void *__libc_malloc(size_t size);
-
-void __libc_closelog(void);
-void __libc_openlog(const char *ident, int option, int facility);
-void __libc_vsyslog(int priority, const char *format, va_list arg_ptr);
-
-pid_t __libc_fork(void);
-
-int __libc_close(int fd);
-int __libc_creat(const char *pathname, mode_t mode);
-int __libc_fcntl(int fd, int cmd, void *arg);
-int __libc_fsync(int fd);
-int __libc_nanosleep(const struct timespec *req, struct timespec *rem);
-int __libc_open(const char *pathname, int flags, mode_t mode);
-int __libc_pause(void);
-int __libc_read(int fd, void *buf, size_t count);
-int __libc_sigsuspend(const sigset_t *mask);
-int __libc_tcdrain(int fd);
-pid_t __libc_waitpid(pid_t pid, int *status, int options);
-int __libc_write(int fd, const void *buf, size_t count);
-
-#endif
diff --git a/mdk-stage1/dietlibc/libpthread/thread_key.c b/mdk-stage1/dietlibc/libpthread/thread_key.c
deleted file mode 100644
index b0f719fc9..000000000
--- a/mdk-stage1/dietlibc/libpthread/thread_key.c
+++ /dev/null
@@ -1,41 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-struct _pthread_fastlock __thread_keys_lock;
-struct _thread_key __thread_keys[PTHREAD_KEYS_MAX];
-
-void __thread_start__key(int id)
-{
-  int i;
-
-  __NO_ASYNC_CANCEL_BEGIN;
-  __pthread_lock(&__thread_keys_lock);
-
-  for (i=0; i<PTHREAD_KEYS_MAX; i++) {
-    __thread_keys[i].tkd[id]=0;
-  }
-
-  __pthread_unlock(&__thread_keys_lock);
-  __NO_ASYNC_CANCEL_END;
-}
-
-void __thread_exit__key(int id)
-{
-  int i,try;
-
-  __NO_ASYNC_CANCEL_BEGIN;
-  __pthread_lock(&__thread_keys_lock);
-
-  for (i=0; i<PTHREAD_KEYS_MAX; i++) {
-    if ((__thread_keys[i].used) && (__thread_keys[i].destructor)) {
-      for (try=0;__thread_keys[i].tkd[id] && (try<PTHREAD_DESTRUCTOR_ITERATIONS);++try)
-	__thread_keys[i].destructor(__thread_keys[i].tkd[id]);
-    }
-  }
-
-  __pthread_unlock(&__thread_keys_lock);
-  __NO_ASYNC_CANCEL_STOP;
-}
diff --git a/mdk-stage1/dietlibc/libregex/rx.c b/mdk-stage1/dietlibc/libregex/rx.c
deleted file mode 100644
index b28358c2e..000000000
--- a/mdk-stage1/dietlibc/libregex/rx.c
+++ /dev/null
@@ -1,434 +0,0 @@
-#include <regex.h>
-#include <stdlib.h>
-#include <ctype.h>
-#include <sys/types.h>
-#include <string.h>
-
-/* this is ugly.
- * the idea is to build a parse tree, then do some poor man's OOP with a
- * generic matcher function call that is always that the start of each
- * record, and a next pointer.  When the parse tree is done, we need to
- * recursively set the next pointers to point to the part of the parse
- * tree that needs to match next.
- * This is the prototype of the generic match function call pointer.
- * The first argument is the "this" pointer, the second is the text to
- * be matched against, ofs is the offset from the start of the matched
- * text (so we can match "^") and matches is an array where match
- * positions are stored. */
-/* now declared in regex.h: */
-/* typedef int (*matcher)(void*,const char*,int ofs,regmatch_t* matches,int plus,int eflags); */
-
-/* one would think that this is approach is an order of magnitude slower
- * than the standard NFA approach, but it isn't.  The busybox grep took
- * 0.26 seconds for a fixed string compared to 0.19 seconds for the
- * glibc regex. */
-
-/* first part: parse a regex into a parse tree */
-struct bracketed {
-  unsigned int cc[32];
-};
-
-/* now declared in regex.h:
-struct regex {
-  matcher m;
-  void* next;
-  int pieces;
-  int num;
-  struct branch *b;
-}; */
-
-struct atom {
-  matcher m;
-  void* next;
-  enum { EMPTY, REGEX, BRACKET, ANY, LINESTART, LINEEND, WORDSTART, WORDEND, CHAR, } type;
-  int bnum;
-  union {
-    struct regex r;
-    struct bracketed b;
-    char c;
-  } u;
-};
-
-struct piece {
-  matcher m;
-  void* next;
-  struct atom a;
-  unsigned char min,max;
-};
-
-struct branch {
-  matcher m;
-  void* next;
-  int num;
-  struct piece *p;
-};
-
-static void clearcc(unsigned int* x) {
-  memset(x,0,sizeof(*x));
-}
-
-static void setcc(unsigned int* x,unsigned int bit) {
-  x[bit/32]|=(1<<((bit%32)-1));
-}
-
-static int issetcc(unsigned int* x,unsigned int bit) {
-  return x[bit/32] & (1<<((bit%32)-1));
-}
-
-static const char* parsebracketed(struct bracketed*__restrict__ b,const char*__restrict__ s,regex_t*__restrict__ rx) {
-  const char* t;
-  int i,negflag=0;
-  if (*s!='[') return s;
-  t=s+1;
-  clearcc(b->cc);
-  if (*t=='^') { negflag=1; ++t; }
-  do {
-    if (*t==0) return s;
-    setcc(b->cc,rx->cflags&REG_ICASE?*t:tolower(*t));
-    if (t[1]=='-' && t[2]!=']') {
-      for (i=*t+1; i<=t[2]; ++i) setcc(b->cc,rx->cflags&REG_ICASE?i:tolower(i));
-      t+=2;
-    }
-    ++t;
-  } while (*t!=']');
-  if (negflag) for (i=0; i<32; ++i) b->cc[i]=~b->cc[i];
-  return t+1;
-}
-
-static const char* parseregex(struct regex* r,const char* s,regex_t* rx);
-
-static int matchatom(void*__restrict__ x,const char*__restrict__ s,int ofs,struct __regex_t*__restrict__ preg,int plus,int eflags) {
-  register struct atom* a=(struct atom*)x;
-  int matchlen=0;
-  switch (a->type) {
-  case EMPTY:
-//    printf("matching EMPTY against \"%s\"\n",s);
-    preg->l[a->bnum].rm_so=preg->l[a->bnum].rm_eo=ofs;
-    goto match;
-  case REGEX:
-//    printf("matching REGEX against \"%s\"\n",s);
-    if ((matchlen=a->u.r.m(a,s,ofs,preg,0,eflags))>=0) {
-      preg->l[a->bnum].rm_so=ofs;
-      preg->l[a->bnum].rm_eo=ofs+matchlen;
-      goto match;
-    }
-    break;
-  case BRACKET:
-//    printf("matching BRACKET against \"%s\"\n",s);
-    matchlen=1;
-    if (*s=='\n' && (preg->cflags&REG_NEWLINE)) break;
-    if (*s && issetcc(a->u.b.cc,(preg->cflags&REG_ICASE?tolower(*s):*s)))
-      goto match;
-    break;
-  case ANY:
-//    printf("matching ANY against \"%s\"\n",s);
-    if (*s=='\n' && (preg->cflags&REG_NEWLINE)) break;
-    matchlen=1;
-    if (*s) goto match;
-    break;
-  case LINESTART:
-//    printf("matching LINESTART against \"%s\"\n",s);
-    if (ofs==0 && (eflags&REG_NOTBOL)==0) {
-      goto match;
-    }
-    break;
-  case LINEEND:
-//    printf("matching LINEEND against \"%s\"\n",s);
-    if ((*s && *s!='\n') || (eflags&REG_NOTEOL)==0) break;
-    goto match;
-  case WORDSTART:
-    if ((ofs==0 || isspace(s[-1])) && !isspace(*s))
-      goto match;
-    break;
-  case WORDEND:
-    if (ofs>0 && !isspace(s[-1]) && isspace(*s))
-      goto match;
-    break;
-  case CHAR:
-//    printf("matching CHAR %c against \"%s\"\n",a->u.c,s);
-    matchlen=1;
-    if (((preg->cflags&REG_ICASE)?tolower(*s):*s)==a->u.c) goto match;
-    break;
-  }
-  return -1;
-match:
-  if (a->next)
-    return ((struct atom*)(a->next))->m(a->next,s+matchlen,ofs+matchlen,preg,plus+matchlen,eflags);
-  else
-    return plus+matchlen;
-}
-
-static const char* parseatom(struct atom*__restrict__ a,const char*__restrict__ s,regex_t*__restrict__ rx) {
-  const char *tmp;
-  a->m=matchatom;
-  a->bnum=-1;
-  switch (*s) {
-  case '(':
-    a->bnum=++rx->brackets;
-    if (s[1]==')') {
-      a->type=EMPTY;
-      return s+2;
-    }
-    a->type=REGEX;
-    if ((tmp=parseregex(&a->u.r,s+1,rx))!=s) {
-      if (*tmp==')')
-	return tmp+1;
-    }
-  case 0:
-  case '|':
-  case ')':
-    return s;
-  case '[':
-    a->type=BRACKET;
-    if ((tmp=parsebracketed(&a->u.b,s,rx))!=s)
-      return tmp;
-    return s;
-  case '.':
-    a->type=ANY;
-    break;
-  case '^':
-    a->type=LINESTART;
-    break;
-  case '$':
-    a->type=LINEEND;
-    break;
-  case '\\':
-    if (!*++s) return s;
-    if (*s=='<') {
-      a->type=WORDSTART;
-      break;
-    } else if (*s=='>') {
-      a->type=WORDEND;
-      break;
-    }
-  default:
-    a->type=CHAR;
-    a->u.c=rx->cflags&REG_ICASE?*s:tolower(*s);
-    break;
-  }
-  return s+1;
-}
-
-/* needs to do "greedy" matching, i.e. match as often as possible */
-static int matchpiece(void*__restrict__ x,const char*__restrict__ s,int ofs,struct __regex_t*__restrict__ preg,int plus,int eflags) {
-  register struct piece* a=(struct piece*)x;
-  int matchlen=0;
-  int tmp,num=0;
-  unsigned int *offsets=alloca(sizeof(int)*a->max);
-  offsets[0]=0;
-//  printf("matchpiece \"%s\"...\n",s);
-  /* first, try to match the atom as often as possible, up to a->max times */
-  if (a->max == 1 && a->min == 1)
-    return a->a.m(&a->a,s+matchlen,ofs+matchlen,preg,0,eflags);
-  while (num<a->max) {
-    void* save=a->a.next;
-    a->a.next=0;
-    if ((tmp=a->a.m(&a->a,s+matchlen,ofs+matchlen,preg,0,eflags))>=0) {
-      a->a.next=save;
-      ++num;
-      matchlen+=tmp;
-      offsets[num]=tmp;
-    } else {
-      a->a.next=save;
-      break;
-    }
-  }
-  if (num<a->min) return -1;		/* already at minimum matches; signal mismatch */
-  /* then, while the rest does not match, back off */
-  for (;;) {
-    if (a->next)
-      tmp=((struct atom*)(a->next))->m(a->next,s+matchlen,ofs+matchlen,preg,plus+matchlen,eflags);
-    else
-      tmp=plus+matchlen;
-    if (tmp>=0) break;	/* it did match; don't back off any further */
-    matchlen-=offsets[num];
-    --num;
-  }
-  return tmp;
-}
-
-static const char* parsepiece(struct piece*__restrict__ p,const char*__restrict__ s,regex_t*__restrict__ rx) {
-  const char* tmp=parseatom(&p->a,s,rx);
-  if (tmp==s) return s;
-  p->m=matchpiece;
-  p->min=p->max=1;
-  switch (*tmp) {
-  case '*': p->min=0; p->max=RE_DUP_MAX; break;
-  case '+': p->min=1; p->max=RE_DUP_MAX; break;
-  case '?': p->min=0; p->max=1; break;
-  case '{':
-    if (isdigit(*++tmp)) {
-      p->min=*tmp-'0'; p->max=RE_DUP_MAX;
-      while (isdigit(*++tmp)) p->min=p->min*10+*tmp-'0';
-      if (*tmp==',') {
-	if (isdigit(*++tmp)) {
-	  p->max=*tmp-'0';
-	  while (isdigit(*++tmp)) p->max=p->max*10+*tmp-'0';
-	}
-      }
-      if (*tmp!='}') return s;
-      ++tmp;
-    }
-  default:
-    return tmp;
-  }
-  return tmp+1;
-}
-
-/* trivial, just pass through */
-static int matchbranch(void*__restrict__ x,const char*__restrict__ s,int ofs,struct __regex_t*__restrict__ preg,int plus,int eflags) {
-  register struct branch* a=(struct branch*)x;
-  int tmp;
-  tmp=a->p->m(a->p,s,ofs,preg,plus,eflags);
-  if (tmp>=0) {
-    if (a->next)
-      return ((struct atom*)(a->next))->m(a->next,s+tmp,ofs+tmp,preg,plus+tmp,eflags);
-    else
-      return plus+tmp;
-  }
-  return -1;
-}
-
-static const char* parsebranch(struct branch*__restrict__ b,const char*__restrict__ s,regex_t*__restrict__ rx,int*__restrict__ pieces) {
-  struct piece p;
-  const char *tmp;
-  b->m=matchbranch;
-  b->num=0; b->p=0;
-  for (;;) {
-    if (*s=='|') {
-      if (b->num==0) {
-	tmp=s+1;
-	p.a.type=EMPTY;
-	p.min=p.max=1;
-      }
-    } else {
-      tmp=parsepiece(&p,s,rx);
-      if (tmp==s) return s;
-    }
-    if (!(b->p=realloc(b->p,++b->num*sizeof(p)))) return s;
-    b->p[b->num-1]=p;
-    if (*s=='|') { ++tmp; break; }
-    s=tmp;
-  }
-  *pieces+=b->num;
-  return tmp;
-}
-
-/* try the branches one by one */
-static int matchregex(void*__restrict__ x,const char*__restrict__ s,int ofs,struct __regex_t*__restrict__ preg,int plus,int eflags) {
-  register struct regex* a=(struct regex*)x;
-  int i,tmp;
-  for (i=0; i<a->num; ++i) {
-    tmp=a->b[i].m(&a->b[i],s,ofs,preg,plus,eflags);
-    if (tmp>=0) {
-      if (a->next)
-	return ((struct atom*)(a->next))->m(a->next,s+tmp,ofs+tmp,preg,plus+tmp,eflags);
-      else
-	return plus+tmp;
-    }
-  }
-  return -1;
-}
-
-static const char* parseregex(struct regex*__restrict__ r,const char*__restrict__ s,regex_t*__restrict__ p) {
-  struct branch b;
-  const char *tmp;
-  r->m=matchregex;
-  r->num=0; r->b=0; r->pieces=0;
-  for (;;) {
-    tmp=parsebranch(&b,s,p,&r->pieces);
-    if (tmp==s) return s;
-    if (!(r->b=realloc(r->b,++r->num*sizeof(b)))) return s;
-    r->b[r->num-1]=b;
-    s=tmp;
-  }
-  return tmp;
-}
-
-
-/* The matcher relies on the presence of next pointers, of which the
- * parser does not know the correct destination.  So we need an
- * additional pass through the data structure that sets the next
- * pointers correctly. */
-static void regex_putnext(struct regex* r,void* next);
-
-static void atom_putnext(struct atom*__restrict__ a,void*__restrict__ next) {
-  a->next=next;
-  if (a->type==REGEX)
-    regex_putnext(&a->u.r,next);
-}
-
-static void piece_putnext(struct piece*__restrict__ p,void*__restrict__ next) {
-  p->next=next;
-  atom_putnext(&p->a,next);
-}
-
-static void branch_putnext(struct branch*__restrict__ b,void*__restrict__ next) {
-  int i;
-  for (i=0; i<b->num-1; ++i)
-    piece_putnext(&b->p[i],&b->p[i+1]);
-  piece_putnext(&b->p[i],0);
-  b->next=next;
-}
-
-static void regex_putnext(struct regex*__restrict__ r,void*__restrict__ next) {
-  int i;
-  for (i=0; i<r->num; ++i)
-    branch_putnext(&r->b[i],next);
-  r->next=next;
-}
-
-
-
-int regcomp(regex_t*__restrict__ preg, const char*__restrict__ regex, int cflags) {
-  const char* t=parseregex(&preg->r,regex,preg);
-  if (t==regex) return -1;
-  regex_putnext(&preg->r,0);
-  preg->cflags=cflags;
-  return 0;
-}
-
-int regexec(const regex_t*__restrict__ preg, const char*__restrict__ string, size_t nmatch, regmatch_t pmatch[], int eflags) {
-  int matched;
-  const char *orig=string;
-  ((regex_t*)preg)->l=alloca(sizeof(regmatch_t)*(preg->brackets+1));
-  while (*string) {
-    matched=preg->r.m((void*)&preg->r,string,string-orig,(regex_t*)preg,0,eflags);
-    if (matched>=0) {
-      if ((preg->cflags&REG_NOSUB)==0) memmove(pmatch,preg->l,nmatch*sizeof(regmatch_t));
-      return 0;
-    }
-    ++string; eflags|=REG_NOTBOL;
-  }
-  return REG_NOMATCH;
-}
-
-
-
-void regfree(regex_t* preg) {
-  int i;
-  for (i=0; i<preg->r.num; ++i) {
-    free(preg->r.b[i].p);
-    free(preg->r.b);
-  }
-}
-
-size_t regerror(int errcode, const regex_t*__restrict__ preg, char*__restrict__ errbuf, size_t errbuf_size) {
-  strncpy(errbuf,"invalid regular expression (sorry)",errbuf_size);
-  return strlen(errbuf);
-}
-
-
-
-
-#if 0
-int main() {
-  struct regex r;
-  int bnum=-1;
-  const char* t=parseregex(&r,"^a*ab$",&bnum);
-  regex_putnext(&r,0);
-  printf("%d pieces, %s\n",r.pieces,t);
-  printf("%d\n",r.m(&r,"aaab",0,0,0));
-  return 0;
-}
-#endif
diff --git a/mdk-stage1/dietlibc/librpc/auth_none.c b/mdk-stage1/dietlibc/librpc/auth_none.c
deleted file mode 100644
index 7a4dffe87..000000000
--- a/mdk-stage1/dietlibc/librpc/auth_none.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* @(#)auth_none.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)auth_none.c 1.19 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * auth_none.c
- * Creates a client authentication handle for passing "null" 
- * credentials and verifiers to remote systems. 
- * 
- * Copyright (C) 1984, Sun Microsystems, Inc. 
- */
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <rpc/auth.h>
-#define MAX_MARSHEL_SIZE 20
-
-/*
- * Authenticator operations routines
- */
-static void authnone_verf();
-static void authnone_destroy();
-static bool_t authnone_marshal();
-static bool_t authnone_validate();
-static bool_t authnone_refresh();
-
-static struct auth_ops ops = {
-	authnone_verf,
-	authnone_marshal,
-	authnone_validate,
-	authnone_refresh,
-	authnone_destroy
-};
-
-static struct authnone_private {
-	AUTH no_client;
-	char marshalled_client[MAX_MARSHEL_SIZE];
-	u_int mcnt;
-} *authnone_private;
-
-AUTH *authnone_create()
-{
-	register struct authnone_private *ap = authnone_private;
-	XDR xdr_stream;
-	register XDR *xdrs;
-
-	if (ap == 0) {
-		ap = (struct authnone_private *) calloc(1, sizeof(*ap));
-		if (ap == 0)
-			return (0);
-		authnone_private = ap;
-	}
-	if (!ap->mcnt) {
-		ap->no_client.ah_cred = ap->no_client.ah_verf = _null_auth;
-		ap->no_client.ah_ops = &ops;
-		xdrs = &xdr_stream;
-		xdrmem_create(xdrs, ap->marshalled_client,
-					  (u_int) MAX_MARSHEL_SIZE, XDR_ENCODE);
-		(void) xdr_opaque_auth(xdrs, &ap->no_client.ah_cred);
-		(void) xdr_opaque_auth(xdrs, &ap->no_client.ah_verf);
-		ap->mcnt = XDR_GETPOS(xdrs);
-		XDR_DESTROY(xdrs);
-	}
-	return (&ap->no_client);
-}
-
- /*ARGSUSED*/ static bool_t authnone_marshal(client, xdrs)
-AUTH *client;
-XDR *xdrs;
-{
-	register struct authnone_private *ap = authnone_private;
-
-	if (ap == 0)
-		return (0);
-	return ((*xdrs->x_ops->x_putbytes) (xdrs,
-										ap->marshalled_client, ap->mcnt));
-}
-
-static void authnone_verf()
-{
-}
-
-static bool_t authnone_validate()
-{
-
-	return (TRUE);
-}
-
-static bool_t authnone_refresh()
-{
-
-	return (FALSE);
-}
-
-static void authnone_destroy()
-{
-}
diff --git a/mdk-stage1/dietlibc/librpc/auth_unix.c b/mdk-stage1/dietlibc/librpc/auth_unix.c
deleted file mode 100644
index 5daeb5f4a..000000000
--- a/mdk-stage1/dietlibc/librpc/auth_unix.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/* @(#)auth_unix.c	2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)auth_unix.c 1.19 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * auth_unix.c, Implements UNIX style authentication parameters. 
- *  
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * The system is very weak.  The client uses no encryption for it's
- * credentials and only sends null verifiers.  The server sends backs
- * null verifiers or optionally a verifier that suggests a new short hand
- * for the credentials.
- *
- */
-
-#include <stdio.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <string.h>
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <rpc/auth.h>
-#include <rpc/auth_unix.h>
-
-/*
- * Unix authenticator operations vector
- */
-static void authunix_nextverf();
-static bool_t authunix_marshal();
-static bool_t authunix_validate();
-static bool_t authunix_refresh();
-static void authunix_destroy();
-
-static struct auth_ops auth_unix_ops = {
-	authunix_nextverf,
-	authunix_marshal,
-	authunix_validate,
-	authunix_refresh,
-	authunix_destroy
-};
-
-/*
- * This struct is pointed to by the ah_private field of an auth_handle.
- */
-struct audata {
-	struct opaque_auth au_origcred;	/* original credentials */
-	struct opaque_auth au_shcred;	/* short hand cred */
-	u_long au_shfaults;			/* short hand cache faults */
-	char au_marshed[MAX_AUTH_BYTES];
-	u_int au_mpos;				/* xdr pos at end of marshed */
-};
-
-#define	AUTH_PRIVATE(auth)	((struct audata *)auth->ah_private)
-
-static void marshal_new_auth();
-
-
-/*
- * Create a unix style authenticator.
- * Returns an auth handle with the given stuff in it.
- */
-AUTH *authunix_create __P ((char *machname, uid_t uid,
-				   gid_t gid, int len,
-				   gid_t *aup_gids))
-{
-	struct authunix_parms aup;
-	char mymem[MAX_AUTH_BYTES];
-	struct timeval now;
-	XDR xdrs;
-	register AUTH *auth;
-	register struct audata *au;
-
-	/*
-	 * Allocate and set up auth handle
-	 */
-	auth = (AUTH *) mem_alloc(sizeof(*auth));
-#ifndef KERNEL
-	if (auth == NULL) {
-		(void) fprintf(stderr, "authunix_create: out of memory\n");
-		return (NULL);
-	}
-#endif
-	au = (struct audata *) mem_alloc(sizeof(*au));
-#ifndef KERNEL
-	if (au == NULL) {
-		(void) fprintf(stderr, "authunix_create: out of memory\n");
-		return (NULL);
-	}
-#endif
-	auth->ah_ops = &auth_unix_ops;
-	auth->ah_private = (caddr_t) au;
-	auth->ah_verf = au->au_shcred = _null_auth;
-	au->au_shfaults = 0;
-
-	/*
-	 * fill in param struct from the given params
-	 */
-	(void) gettimeofday(&now, (struct timezone *) 0);
-	aup.aup_time = now.tv_sec;
-	aup.aup_machname = machname;
-	aup.aup_uid = uid;
-	aup.aup_gid = gid;
-	aup.aup_len = (u_int) len;
-	aup.aup_gids = aup_gids;
-
-	/*
-	 * Serialize the parameters into origcred
-	 */
-	xdrmem_create(&xdrs, mymem, MAX_AUTH_BYTES, XDR_ENCODE);
-	if (!xdr_authunix_parms(&xdrs, &aup))
-		abort();
-	au->au_origcred.oa_length = len = XDR_GETPOS(&xdrs);
-	au->au_origcred.oa_flavor = AUTH_UNIX;
-#ifdef KERNEL
-	au->au_origcred.oa_base = mem_alloc((u_int) len);
-#else
-	if ((au->au_origcred.oa_base = mem_alloc((u_int) len)) == NULL) {
-		(void) fprintf(stderr, "authunix_create: out of memory\n");
-		return (NULL);
-	}
-#endif
-	bcopy(mymem, au->au_origcred.oa_base, (u_int) len);
-
-	/*
-	 * set auth handle to reflect new cred.
-	 */
-	auth->ah_cred = au->au_origcred;
-	marshal_new_auth(auth);
-	return (auth);
-}
-
-/*
- * Returns an auth handle with parameters determined by doing lots of
- * syscalls.
- */
-AUTH *authunix_create_default()
-{
-	register int len;
-	char machname[MAX_MACHINE_NAME + 1];
-	register int uid;
-	register int gid;
-	gid_t gids[NGRPS];
-
-	if (gethostname(machname, MAX_MACHINE_NAME) == -1)
-		abort();
-	machname[MAX_MACHINE_NAME] = 0;
-	uid = geteuid();
-	gid = getegid();
-	if ((len = getgroups(NGRPS, gids)) < 0)
-		abort();
-	return (authunix_create(machname, uid, gid, len, gids));
-}
-
-/*
- * authunix operations
- */
-
-static void authunix_nextverf(auth)
-AUTH *auth;
-{
-	/* no action necessary */
-}
-
-static bool_t authunix_marshal(auth, xdrs)
-AUTH *auth;
-XDR *xdrs;
-{
-	register struct audata *au = AUTH_PRIVATE(auth);
-
-	return (XDR_PUTBYTES(xdrs, au->au_marshed, au->au_mpos));
-}
-
-static bool_t authunix_validate(auth, verf)
-register AUTH *auth;
-struct opaque_auth verf;
-{
-	register struct audata *au;
-	XDR xdrs;
-
-	if (verf.oa_flavor == AUTH_SHORT) {
-		au = AUTH_PRIVATE(auth);
-		xdrmem_create(&xdrs, verf.oa_base, verf.oa_length, XDR_DECODE);
-
-		if (au->au_shcred.oa_base != NULL) {
-			mem_free(au->au_shcred.oa_base, au->au_shcred.oa_length);
-			au->au_shcred.oa_base = NULL;
-		}
-		if (xdr_opaque_auth(&xdrs, &au->au_shcred)) {
-			auth->ah_cred = au->au_shcred;
-		} else {
-			xdrs.x_op = XDR_FREE;
-			(void) xdr_opaque_auth(&xdrs, &au->au_shcred);
-			au->au_shcred.oa_base = NULL;
-			auth->ah_cred = au->au_origcred;
-		}
-		marshal_new_auth(auth);
-	}
-	return (TRUE);
-}
-
-static bool_t authunix_refresh(auth)
-register AUTH *auth;
-{
-	register struct audata *au = AUTH_PRIVATE(auth);
-	struct authunix_parms aup;
-	struct timeval now;
-	XDR xdrs;
-	register int stat;
-
-	if (auth->ah_cred.oa_base == au->au_origcred.oa_base) {
-		/* there is no hope.  Punt */
-		return (FALSE);
-	}
-	au->au_shfaults++;
-
-	/* first deserialize the creds back into a struct authunix_parms */
-	aup.aup_machname = NULL;
-	aup.aup_gids = (gid_t *) NULL;
-	xdrmem_create(&xdrs, au->au_origcred.oa_base,
-				  au->au_origcred.oa_length, XDR_DECODE);
-	stat = xdr_authunix_parms(&xdrs, &aup);
-	if (!stat)
-		goto done;
-
-	/* update the time and serialize in place */
-	(void) gettimeofday(&now, (struct timezone *) 0);
-	aup.aup_time = now.tv_sec;
-	xdrs.x_op = XDR_ENCODE;
-	XDR_SETPOS(&xdrs, 0);
-	stat = xdr_authunix_parms(&xdrs, &aup);
-	if (!stat)
-		goto done;
-	auth->ah_cred = au->au_origcred;
-	marshal_new_auth(auth);
-  done:
-	/* free the struct authunix_parms created by deserializing */
-	xdrs.x_op = XDR_FREE;
-	(void) xdr_authunix_parms(&xdrs, &aup);
-	XDR_DESTROY(&xdrs);
-	return (stat);
-}
-
-static void authunix_destroy(auth)
-register AUTH *auth;
-{
-	register struct audata *au = AUTH_PRIVATE(auth);
-
-	mem_free(au->au_origcred.oa_base, au->au_origcred.oa_length);
-
-	if (au->au_shcred.oa_base != NULL)
-		mem_free(au->au_shcred.oa_base, au->au_shcred.oa_length);
-
-	mem_free(auth->ah_private, sizeof(struct audata));
-
-	if (auth->ah_verf.oa_base != NULL)
-		mem_free(auth->ah_verf.oa_base, auth->ah_verf.oa_length);
-
-	mem_free((caddr_t) auth, sizeof(*auth));
-}
-
-/*
- * Marshals (pre-serializes) an auth struct.
- * sets private data, au_marshed and au_mpos
- */
-static void marshal_new_auth(auth)
-register AUTH *auth;
-{
-	XDR xdr_stream;
-	register XDR *xdrs = &xdr_stream;
-	register struct audata *au = AUTH_PRIVATE(auth);
-
-	xdrmem_create(xdrs, au->au_marshed, MAX_AUTH_BYTES, XDR_ENCODE);
-	if ((!xdr_opaque_auth(xdrs, &(auth->ah_cred))) ||
-		(!xdr_opaque_auth(xdrs, &(auth->ah_verf)))) {
-		perror("auth_none.c - Fatal marshalling problem");
-	} else {
-		au->au_mpos = XDR_GETPOS(xdrs);
-	}
-	XDR_DESTROY(xdrs);
-}
diff --git a/mdk-stage1/dietlibc/librpc/authunix_prot.c b/mdk-stage1/dietlibc/librpc/authunix_prot.c
deleted file mode 100644
index ddcadb808..000000000
--- a/mdk-stage1/dietlibc/librpc/authunix_prot.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* @(#)authunix_prot.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)authunix_prot.c 1.15 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * authunix_prot.c
- * XDR for UNIX style authentication parameters for RPC
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <rpc/auth.h>
-#include <rpc/auth_unix.h>
-
-/*
- * XDR for unix authentication parameters.
- */
-bool_t xdr_authunix_parms(xdrs, p)
-register XDR *xdrs;
-register struct authunix_parms *p;
-{
-  int a,b;
-
-	if (xdr_u_long(xdrs, &(p->aup_time))
-		&& xdr_string(xdrs, &(p->aup_machname), MAX_MACHINE_NAME)
-		&& xdr_int(xdrs, &a)
-		&& xdr_int(xdrs, &b)
-		&& xdr_array(xdrs, (caddr_t *) & (p->aup_gids),
-					 &(p->aup_len), NGRPS, sizeof(int), (xdrproc_t)xdr_int)) {
-		p->aup_uid=(uid_t)a;
-		p->aup_gid=(gid_t)b;
-		return (TRUE);
-	}
-	return (FALSE);
-}
diff --git a/mdk-stage1/dietlibc/librpc/bindresvport.c b/mdk-stage1/dietlibc/librpc/bindresvport.c
deleted file mode 100644
index 8b65261dd..000000000
--- a/mdk-stage1/dietlibc/librpc/bindresvport.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-/*
- * Copyright (c) 1987 by Sun Microsystems, Inc.
- */
-
-#include <unistd.h>
-#include <string.h>
-#include <sys/types.h>
-#include <errno.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-
-/*
- * Bind a socket to a privileged IP port
- */
-int bindresvport(sd, sin)
-int sd;
-struct sockaddr_in *sin;
-{
-	int res;
-	static short port;
-	struct sockaddr_in myaddr;
-	extern int errno;
-	int i;
-
-#define STARTPORT 600
-#define ENDPORT (IPPORT_RESERVED - 1)
-#define NPORTS	(ENDPORT - STARTPORT + 1)
-
-	if (sin == (struct sockaddr_in *) 0) {
-		sin = &myaddr;
-		bzero(sin, sizeof(*sin));
-		sin->sin_family = AF_INET;
-	} else if (sin->sin_family != AF_INET) {
-		errno = EPFNOSUPPORT;
-		return (-1);
-	}
-	if (port == 0) {
-		port = (getpid() % NPORTS) + STARTPORT;
-	}
-	res = -1;
-	errno = EADDRINUSE;
-	for (i = 0; i < NPORTS && res < 0 && errno == EADDRINUSE; i++) {
-		sin->sin_port = htons(port++);
-		if (port > ENDPORT) {
-			port = STARTPORT;
-		}
-		res = bind(sd, (struct sockaddr*)sin, sizeof(struct sockaddr_in));
-	}
-	return (res);
-}
diff --git a/mdk-stage1/dietlibc/librpc/clnt_generic.c b/mdk-stage1/dietlibc/librpc/clnt_generic.c
deleted file mode 100644
index 9bb81cc80..000000000
--- a/mdk-stage1/dietlibc/librpc/clnt_generic.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/* @(#)clnt_generic.c	2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)clnt_generic.c 1.4 87/08/11 (C) 1987 SMI";
-#endif
-/*
- * Copyright (C) 1987, Sun Microsystems, Inc.
- */
-#include <rpc/rpc.h>
-#include <sys/socket.h>
-#include <errno.h>
-#include <netdb.h>
-#include <string.h>
-
-/*
- * Generic client creation: takes (hostname, program-number, protocol) and
- * returns client handle. Default options are set, which the user can 
- * change using the rpc equivalent of ioctl()'s.
- */
-CLIENT *clnt_create __P ((const char *hostname, const u_long prog,
-				 const u_long vers, const char *proto))
-{
-	struct hostent *h;
-	struct protoent *p;
-	struct sockaddr_in sin;
-	int sock;
-	struct timeval tv;
-	CLIENT *client;
-
-	h = gethostbyname(hostname);
-	if (h == NULL) {
-		rpc_createerr.cf_stat = RPC_UNKNOWNHOST;
-		return (NULL);
-	}
-	if (h->h_addrtype != AF_INET) {
-		/*
-		 * Only support INET for now
-		 */
-		rpc_createerr.cf_stat = RPC_SYSTEMERROR;
-		rpc_createerr.cf_error.re_errno = EAFNOSUPPORT;
-		return (NULL);
-	}
-#ifdef __linux__
-	bzero((char *) &sin, sizeof(sin));
-#endif
-	sin.sin_family = h->h_addrtype;
-	sin.sin_port = 0;
-#ifndef __linux__
-	bzero(sin.sin_zero, sizeof(sin.sin_zero));
-#endif
-	bcopy(h->h_addr, (char *) &sin.sin_addr, h->h_length);
-	p = getprotobyname(proto);
-	if (p == NULL) {
-		rpc_createerr.cf_stat = RPC_UNKNOWNPROTO;
-		rpc_createerr.cf_error.re_errno = EPFNOSUPPORT;
-		return (NULL);
-	}
-	sock = RPC_ANYSOCK;
-	switch (p->p_proto) {
-	case IPPROTO_UDP:
-		tv.tv_sec = 5;
-		tv.tv_usec = 0;
-		client = clntudp_create(&sin, prog, vers, tv, &sock);
-		if (client == NULL) {
-			return (NULL);
-		}
-		tv.tv_sec = 25;
-		clnt_control(client, CLSET_TIMEOUT, (char*)&tv);
-		break;
-	case IPPROTO_TCP:
-		client = clnttcp_create(&sin, prog, vers, &sock, 0, 0);
-		if (client == NULL) {
-			return (NULL);
-		}
-		tv.tv_sec = 25;
-		tv.tv_usec = 0;
-		clnt_control(client, CLSET_TIMEOUT, (char*)&tv);
-		break;
-	default:
-		rpc_createerr.cf_stat = RPC_SYSTEMERROR;
-		rpc_createerr.cf_error.re_errno = EPFNOSUPPORT;
-		return (NULL);
-	}
-	return (client);
-}
diff --git a/mdk-stage1/dietlibc/librpc/clnt_perror.c b/mdk-stage1/dietlibc/librpc/clnt_perror.c
deleted file mode 100644
index 4ede1a43e..000000000
--- a/mdk-stage1/dietlibc/librpc/clnt_perror.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/* @(#)clnt_perror.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)clnt_perror.c 1.15 87/10/07 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * clnt_perror.c
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- */
-#include <stdio.h>
-
-#include <rpc/types.h>
-#include <rpc/auth.h>
-#include <rpc/clnt.h>
-
-//extern char *sys_errlist[];
-//static char *auth_errmsg();
-
-extern char *strcpy();
-
-#if 0
-static char *buf;
-
-static char *_buf()
-{
-
-	if (buf == 0)
-		buf = (char *) malloc(256);
-	return (buf);
-}
-#endif	
-
-/*
- * Print reply error info
- */
-char *clnt_sperror __P ((CLIENT *rpch, const char *s))
-{
-#if 0
-	struct rpc_err e;
-	void clnt_perrno();
-	char *err;
-	char *str = _buf();
-	char *strstart = str;
-
-	if (str == 0)
-		return (0);
-	CLNT_GETERR(rpch, &e);
-
-	(void) sprintf(str, "%s: ", s);
-	str += strlen(str);
-
-	(void) strcpy(str, clnt_sperrno(e.re_status));
-	str += strlen(str);
-
-	switch (e.re_status) {
-	case RPC_SUCCESS:
-	case RPC_CANTENCODEARGS:
-	case RPC_CANTDECODERES:
-	case RPC_TIMEDOUT:
-	case RPC_PROGUNAVAIL:
-	case RPC_PROCUNAVAIL:
-	case RPC_CANTDECODEARGS:
-	case RPC_SYSTEMERROR:
-	case RPC_UNKNOWNHOST:
-	case RPC_UNKNOWNPROTO:
-	case RPC_PMAPFAILURE:
-	case RPC_PROGNOTREGISTERED:
-	case RPC_FAILED:
-		break;
-
-	case RPC_CANTSEND:
-	case RPC_CANTRECV:
-		(void) sprintf(str, "; errno = %s", sys_errlist[e.re_errno]);
-		str += strlen(str);
-		break;
-
-	case RPC_VERSMISMATCH:
-		(void) sprintf(str,
-					   "; low version = %lu, high version = %lu",
-					   e.re_vers.low, e.re_vers.high);
-		str += strlen(str);
-		break;
-
-	case RPC_AUTHERROR:
-		err = auth_errmsg(e.re_why);
-		(void) sprintf(str, "; why = ");
-		str += strlen(str);
-		if (err != NULL) {
-			(void) sprintf(str, "%s", err);
-		} else {
-			(void) sprintf(str,
-						   "(unknown authentication error - %d)",
-						   (int) e.re_why);
-		}
-		str += strlen(str);
-		break;
-
-	case RPC_PROGVERSMISMATCH:
-		(void) sprintf(str,
-					   "; low version = %lu, high version = %lu",
-					   e.re_vers.low, e.re_vers.high);
-		str += strlen(str);
-		break;
-
-	default:					/* unknown */
-		(void) sprintf(str,
-					   "; s1 = %lu, s2 = %lu", e.re_lb.s1, e.re_lb.s2);
-		str += strlen(str);
-		break;
-	}
-	(void) sprintf(str, "\n");
-	return (strstart);
-#endif
-	return (0);
-}
-
-void clnt_perror __P ((CLIENT *rpch, const char *s))
-{
-	(void) fprintf(stderr, "%s", clnt_sperror(rpch, s));
-}
-
-
-struct rpc_errtab {
-	enum clnt_stat status;
-	char *message;
-};
-
-#if 0
-static struct rpc_errtab rpc_errlist[] = {
-	{RPC_SUCCESS,
-	 "RPC: Success"},
-	{RPC_CANTENCODEARGS,
-	 "RPC: Can't encode arguments"},
-	{RPC_CANTDECODERES,
-	 "RPC: Can't decode result"},
-	{RPC_CANTSEND,
-	 "RPC: Unable to send"},
-	{RPC_CANTRECV,
-	 "RPC: Unable to receive"},
-	{RPC_TIMEDOUT,
-	 "RPC: Timed out"},
-	{RPC_VERSMISMATCH,
-	 "RPC: Incompatible versions of RPC"},
-	{RPC_AUTHERROR,
-	 "RPC: Authentication error"},
-	{RPC_PROGUNAVAIL,
-	 "RPC: Program unavailable"},
-	{RPC_PROGVERSMISMATCH,
-	 "RPC: Program/version mismatch"},
-	{RPC_PROCUNAVAIL,
-	 "RPC: Procedure unavailable"},
-	{RPC_CANTDECODEARGS,
-	 "RPC: Server can't decode arguments"},
-	{RPC_SYSTEMERROR,
-	 "RPC: Remote system error"},
-	{RPC_UNKNOWNHOST,
-	 "RPC: Unknown host"},
-	{RPC_UNKNOWNPROTO,
-	 "RPC: Unknown protocol"},
-	{RPC_PMAPFAILURE,
-	 "RPC: Port mapper failure"},
-	{RPC_PROGNOTREGISTERED,
-	 "RPC: Program not registered"},
-	{RPC_FAILED,
-	 "RPC: Failed (unspecified error)"}
-};
-#endif
-
-/*
- * This interface for use by clntrpc
- */
-char *clnt_sperrno(stat)
-enum clnt_stat stat;
-{
-#if 0
-	int i;
-
-	for (i = 0; i < sizeof(rpc_errlist) / sizeof(struct rpc_errtab); i++) {
-		if (rpc_errlist[i].status == stat) {
-			return (rpc_errlist[i].message);
-		}
-	}
-#endif
-	return ("RPC: (unknown error code)");
-}
-
-void clnt_perrno(num)
-enum clnt_stat num;
-{
-	(void) fprintf(stderr, "%s", clnt_sperrno(num));
-}
-
-
-char *clnt_spcreateerror __P ((__const char *s))
-{
-#if 0
-	extern int sys_nerr;
-	extern char *sys_errlist[];
-	char *str = _buf();
-
-	if (str == 0)
-		return (0);
-	(void) sprintf(str, "%s: ", s);
-	(void) strcat(str, clnt_sperrno(rpc_createerr.cf_stat));
-	switch (rpc_createerr.cf_stat) {
-	case RPC_PMAPFAILURE:
-		(void) strcat(str, " - ");
-		(void) strcat(str, clnt_sperrno(rpc_createerr.cf_error.re_status));
-		break;
-
-	case RPC_SYSTEMERROR:
-		(void) strcat(str, " - ");
-		if (rpc_createerr.cf_error.re_errno > 0
-			&& rpc_createerr.cf_error.re_errno < sys_nerr)
-			(void) strcat(str,
-						  sys_errlist[rpc_createerr.cf_error.re_errno]);
-		else
-			(void) sprintf(&str[strlen(str)], "Error %d",
-						   rpc_createerr.cf_error.re_errno);
-		break;
-	}
-	(void) strcat(str, "\n");
-	return (str);
-#endif
-	return(0);
-}
-
-extern void clnt_pcreateerror __P ((__const char *s))
-{
-	(void) fprintf(stderr, "%s", clnt_spcreateerror(s));
-}
-
-struct auth_errtab {
-	enum auth_stat status;
-	char *message;
-};
-
-#if 0
-static struct auth_errtab auth_errlist[] = {
-	{AUTH_OK,
-	 "Authentication OK"},
-	{AUTH_BADCRED,
-	 "Invalid client credential"},
-	{AUTH_REJECTEDCRED,
-	 "Server rejected credential"},
-	{AUTH_BADVERF,
-	 "Invalid client verifier"},
-	{AUTH_REJECTEDVERF,
-	 "Server rejected verifier"},
-	{AUTH_TOOWEAK,
-	 "Client credential too weak"},
-	{AUTH_INVALIDRESP,
-	 "Invalid server verifier"},
-	{AUTH_FAILED,
-	 "Failed (unspecified error)"},
-};
-
-static char *auth_errmsg(stat)
-enum auth_stat stat;
-{
-	int i;
-
-	for (i = 0; i < sizeof(auth_errlist) / sizeof(struct auth_errtab); i++) {
-		if (auth_errlist[i].status == stat) {
-			return (auth_errlist[i].message);
-		}
-	}
-	return (NULL);
-}
-#endif	
diff --git a/mdk-stage1/dietlibc/librpc/clnt_raw.c b/mdk-stage1/dietlibc/librpc/clnt_raw.c
deleted file mode 100644
index 7479b55d6..000000000
--- a/mdk-stage1/dietlibc/librpc/clnt_raw.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/* @(#)clnt_raw.c	2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)clnt_raw.c 1.22 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * clnt_raw.c
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * Memory based rpc for simple testing and timing.
- * Interface to create an rpc client and server in the same process.
- * This lets us similate rpc and get round trip overhead, without
- * any interference from the kernal.
- */
-
-#include <rpc/rpc.h>
-
-#define MCALL_MSG_SIZE 24
-
-/*
- * This is the "network" we will be moving stuff over.
- */
-static struct clntraw_private {
-	CLIENT client_object;
-	XDR xdr_stream;
-	char _raw_buf[UDPMSGSIZE];
-	char mashl_callmsg[MCALL_MSG_SIZE];
-	u_int mcnt;
-} *clntraw_private;
-
-static enum clnt_stat clntraw_call();
-static void clntraw_abort();
-static void clntraw_geterr();
-static bool_t clntraw_freeres();
-static bool_t clntraw_control();
-static void clntraw_destroy();
-
-static struct clnt_ops client_ops = {
-	clntraw_call,
-	clntraw_abort,
-	clntraw_geterr,
-	clntraw_freeres,
-	clntraw_destroy,
-	clntraw_control
-};
-
-void svc_getreq();
-
-/*
- * Create a client handle for memory based rpc.
- */
-CLIENT *clntraw_create(prog, vers)
-u_long prog;
-u_long vers;
-{
-	register struct clntraw_private *clp = clntraw_private;
-	struct rpc_msg call_msg;
-	XDR *xdrs = &clp->xdr_stream;
-	CLIENT *client = &clp->client_object;
-
-	if (clp == 0) {
-		clp = (struct clntraw_private *) calloc(1, sizeof(*clp));
-		if (clp == 0)
-			return (0);
-		clntraw_private = clp;
-	}
-	/*
-	 * pre-serialize the staic part of the call msg and stash it away
-	 */
-	call_msg.rm_direction = CALL;
-	call_msg.rm_call.cb_rpcvers = RPC_MSG_VERSION;
-	call_msg.rm_call.cb_prog = prog;
-	call_msg.rm_call.cb_vers = vers;
-	xdrmem_create(xdrs, clp->mashl_callmsg, MCALL_MSG_SIZE, XDR_ENCODE);
-	if (!xdr_callhdr(xdrs, &call_msg)) {
-		perror("clnt_raw.c - Fatal header serialization error.");
-	}
-	clp->mcnt = XDR_GETPOS(xdrs);
-	XDR_DESTROY(xdrs);
-
-	/*
-	 * Set xdrmem for client/server shared buffer
-	 */
-	xdrmem_create(xdrs, clp->_raw_buf, UDPMSGSIZE, XDR_FREE);
-
-	/*
-	 * create client handle
-	 */
-	client->cl_ops = &client_ops;
-	client->cl_auth = authnone_create();
-	return (client);
-}
-
-static enum clnt_stat
-clntraw_call(h, proc, xargs, argsp, xresults, resultsp, timeout)
-CLIENT *h;
-u_long proc;
-xdrproc_t xargs;
-caddr_t argsp;
-xdrproc_t xresults;
-caddr_t resultsp;
-struct timeval timeout;
-{
-	register struct clntraw_private *clp = clntraw_private;
-	register XDR *xdrs = &clp->xdr_stream;
-	struct rpc_msg msg;
-	enum clnt_stat status;
-	struct rpc_err error;
-
-	if (clp == 0)
-		return (RPC_FAILED);
-  call_again:
-	/*
-	 * send request
-	 */
-	xdrs->x_op = XDR_ENCODE;
-	XDR_SETPOS(xdrs, 0);
-	((struct rpc_msg *) clp->mashl_callmsg)->rm_xid++;
-	if ((!XDR_PUTBYTES(xdrs, clp->mashl_callmsg, clp->mcnt)) ||
-		(!XDR_PUTLONG(xdrs, (long *) &proc)) ||
-		(!AUTH_MARSHALL(h->cl_auth, xdrs)) || (!(*xargs) (xdrs, argsp))) {
-		return (RPC_CANTENCODEARGS);
-	}
-	(void) XDR_GETPOS(xdrs);	/* called just to cause overhead */
-
-	/*
-	 * We have to call server input routine here because this is
-	 * all going on in one process. Yuk.
-	 */
-	svc_getreq(1);
-
-	/*
-	 * get results
-	 */
-	xdrs->x_op = XDR_DECODE;
-	XDR_SETPOS(xdrs, 0);
-	msg.acpted_rply.ar_verf = _null_auth;
-	msg.acpted_rply.ar_results.where = resultsp;
-	msg.acpted_rply.ar_results.proc = xresults;
-	if (!xdr_replymsg(xdrs, &msg))
-		return (RPC_CANTDECODERES);
-	_seterr_reply(&msg, &error);
-	status = error.re_status;
-
-	if (status == RPC_SUCCESS) {
-		if (!AUTH_VALIDATE(h->cl_auth, &msg.acpted_rply.ar_verf)) {
-			status = RPC_AUTHERROR;
-		}
-	} /* end successful completion */
-	else {
-		if (AUTH_REFRESH(h->cl_auth))
-			goto call_again;
-	}							/* end of unsuccessful completion */
-
-	if (status == RPC_SUCCESS) {
-		if (!AUTH_VALIDATE(h->cl_auth, &msg.acpted_rply.ar_verf)) {
-			status = RPC_AUTHERROR;
-		}
-		if (msg.acpted_rply.ar_verf.oa_base != NULL) {
-			xdrs->x_op = XDR_FREE;
-			(void) xdr_opaque_auth(xdrs, &(msg.acpted_rply.ar_verf));
-		}
-	}
-
-	return (status);
-}
-
-static void clntraw_geterr()
-{
-}
-
-
-static bool_t clntraw_freeres(cl, xdr_res, res_ptr)
-CLIENT *cl;
-xdrproc_t xdr_res;
-caddr_t res_ptr;
-{
-	register struct clntraw_private *clp = clntraw_private;
-	register XDR *xdrs = &clp->xdr_stream;
-	bool_t rval;
-
-	if (clp == 0) {
-		rval = (bool_t) RPC_FAILED;
-		return (rval);
-	}
-	xdrs->x_op = XDR_FREE;
-	return ((*xdr_res) (xdrs, res_ptr));
-}
-
-static void clntraw_abort()
-{
-}
-
-static bool_t clntraw_control()
-{
-	return (FALSE);
-}
-
-static void clntraw_destroy()
-{
-}
diff --git a/mdk-stage1/dietlibc/librpc/clnt_simple.c b/mdk-stage1/dietlibc/librpc/clnt_simple.c
deleted file mode 100644
index f309f86ff..000000000
--- a/mdk-stage1/dietlibc/librpc/clnt_simple.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/* @(#)clnt_simple.c	2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)clnt_simple.c 1.35 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/* 
- * clnt_simple.c
- * Simplified front end to rpc.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <stdio.h>
-#include <unistd.h>
-#include <rpc/rpc.h>
-#include <sys/socket.h>
-#include <netdb.h>
-#include <string.h>
-
-static struct callrpc_private {
-	CLIENT *client;
-	int socket;
-	int oldprognum, oldversnum, valid;
-	char *oldhost;
-} *callrpc_private;
-
-int callrpc (const char *host, const u_long prognum,
-			 const u_long versnum, const u_long procnum,
-			 const xdrproc_t inproc, const char *in,
-			 const xdrproc_t outproc, char *out)
-{
-	register struct callrpc_private *crp = callrpc_private;
-	struct sockaddr_in server_addr;
-	enum clnt_stat clnt_stat;
-	struct hostent *hp;
-	struct timeval timeout, tottimeout;
-
-	if (crp == 0) {
-		crp = (struct callrpc_private *) calloc(1, sizeof(*crp));
-		if (crp == 0)
-			return (0);
-		callrpc_private = crp;
-	}
-	if (crp->oldhost == NULL) {
-		crp->oldhost = malloc(256);
-		crp->oldhost[0] = 0;
-		crp->socket = RPC_ANYSOCK;
-	}
-	if (crp->valid && crp->oldprognum == prognum
-		&& crp->oldversnum == versnum && strcmp(crp->oldhost, host) == 0) {
-		/* reuse old client */
-	} else {
-		crp->valid = 0;
-		(void) close(crp->socket);
-		crp->socket = RPC_ANYSOCK;
-		if (crp->client) {
-			clnt_destroy(crp->client);
-			crp->client = NULL;
-		}
-		if ((hp = gethostbyname(host)) == NULL)
-			return ((int) RPC_UNKNOWNHOST);
-		timeout.tv_usec = 0;
-		timeout.tv_sec = 5;
-		bcopy(hp->h_addr, (char *) &server_addr.sin_addr, hp->h_length);
-		server_addr.sin_family = AF_INET;
-		server_addr.sin_port = 0;
-		if ((crp->client = clntudp_create(&server_addr, (u_long) prognum,
-										  (u_long) versnum, timeout,
-										  &crp->socket)) == NULL)
-			return ((int) rpc_createerr.cf_stat);
-		crp->valid = 1;
-		crp->oldprognum = prognum;
-		crp->oldversnum = versnum;
-		(void) strcpy(crp->oldhost, host);
-	}
-	tottimeout.tv_sec = 25;
-	tottimeout.tv_usec = 0;
-	clnt_stat = clnt_call(crp->client, procnum, inproc, (char*)in,
-						  outproc, out, tottimeout);
-	/* 
-	 * if call failed, empty cache
-	 */
-	if (clnt_stat != RPC_SUCCESS)
-		crp->valid = 0;
-	return ((int) clnt_stat);
-}
diff --git a/mdk-stage1/dietlibc/librpc/clnt_tcp.c b/mdk-stage1/dietlibc/librpc/clnt_tcp.c
deleted file mode 100644
index 8c39e8933..000000000
--- a/mdk-stage1/dietlibc/librpc/clnt_tcp.c
+++ /dev/null
@@ -1,463 +0,0 @@
-/* @(#)clnt_tcp.c	2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)clnt_tcp.c 1.37 87/10/05 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * clnt_tcp.c, Implements a TCP/IP based, client side RPC.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * TCP based RPC supports 'batched calls'.
- * A sequence of calls may be batched-up in a send buffer.  The rpc call
- * return immediately to the client even though the call was not necessarily
- * sent.  The batching occurs if the results' xdr routine is NULL (0) AND
- * the rpc timeout value is zero (see clnt.h, rpc).
- *
- * Clients should NOT casually batch calls that in fact return results; that is,
- * the server side should be aware that a call is batched and not produce any
- * return message.  Batched calls that produce many result messages can
- * deadlock (netlock) the client and the server....
- *
- * Now go hang yourself.
- */
-
-#include <stdio.h>
-#include <rpc/rpc.h>
-#include <sys/socket.h>
-#include <netdb.h>
-#include <errno.h>
-#include <rpc/pmap_clnt.h>
-#include <unistd.h>
-
-#define MCALL_MSG_SIZE 24
-
-extern int errno;
-
-static int readtcp();
-static int writetcp();
-
-static enum clnt_stat clnttcp_call();
-static void clnttcp_abort();
-static void clnttcp_geterr();
-static bool_t clnttcp_freeres();
-static bool_t clnttcp_control();
-static void clnttcp_destroy();
-
-static struct clnt_ops tcp_ops = {
-	clnttcp_call,
-	clnttcp_abort,
-	clnttcp_geterr,
-	clnttcp_freeres,
-	clnttcp_destroy,
-	clnttcp_control
-};
-
-struct ct_data {
-	int ct_sock;
-	bool_t ct_closeit;
-	struct timeval ct_wait;
-	bool_t ct_waitset;			/* wait set by clnt_control? */
-	struct sockaddr_in ct_addr;
-	struct rpc_err ct_error;
-	char ct_mcall[MCALL_MSG_SIZE];	/* marshalled callmsg */
-	u_int ct_mpos;				/* pos after marshal */
-	XDR ct_xdrs;
-};
-
-/*
- * Create a client handle for a tcp/ip connection.
- * If *sockp<0, *sockp is set to a newly created TCP socket and it is
- * connected to raddr.  If *sockp non-negative then
- * raddr is ignored.  The rpc/tcp package does buffering
- * similar to stdio, so the client must pick send and receive buffer sizes,];
- * 0 => use the default.
- * If raddr->sin_port is 0, then a binder on the remote machine is
- * consulted for the right port number.
- * NB: *sockp is copied into a private area.
- * NB: It is the clients responsibility to close *sockp.
- * NB: The rpch->cl_auth is set null authentication.  Caller may wish to set this
- * something more useful.
- */
-CLIENT *clnttcp_create(raddr, prog, vers, sockp, sendsz, recvsz)
-struct sockaddr_in *raddr;
-u_long prog;
-u_long vers;
-register int *sockp;
-u_int sendsz;
-u_int recvsz;
-{
-	CLIENT *h;
-	register struct ct_data *ct;
-	struct timeval now;
-	struct rpc_msg call_msg;
-
-	h = (CLIENT *) mem_alloc(sizeof(*h));
-	if (h == NULL) {
-		(void) fprintf(stderr, "clnttcp_create: out of memory\n");
-		rpc_createerr.cf_stat = RPC_SYSTEMERROR;
-		rpc_createerr.cf_error.re_errno = errno;
-		goto fooy;
-	}
-	ct = (struct ct_data *) mem_alloc(sizeof(*ct));
-	if (ct == NULL) {
-		(void) fprintf(stderr, "clnttcp_create: out of memory\n");
-		rpc_createerr.cf_stat = RPC_SYSTEMERROR;
-		rpc_createerr.cf_error.re_errno = errno;
-		goto fooy;
-	}
-
-	/*
-	 * If no port number given ask the pmap for one
-	 */
-	if (raddr->sin_port == 0) {
-		u_short port;
-
-		if ((port = pmap_getport(raddr, prog, vers, IPPROTO_TCP)) == 0) {
-			mem_free((caddr_t) ct, sizeof(struct ct_data));
-
-			mem_free((caddr_t) h, sizeof(CLIENT));
-			return ((CLIENT *) NULL);
-		}
-		raddr->sin_port = htons(port);
-	}
-
-	/*
-	 * If no socket given, open one
-	 */
-	if (*sockp < 0) {
-		*sockp = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
-		(void) bindresvport(*sockp, (struct sockaddr_in *) 0);
-		if ((*sockp < 0)
-			|| (connect(*sockp, (struct sockaddr *) raddr,
-						sizeof(*raddr)) < 0)) {
-			rpc_createerr.cf_stat = RPC_SYSTEMERROR;
-			rpc_createerr.cf_error.re_errno = errno;
-			(void) close(*sockp);
-			goto fooy;
-		}
-		ct->ct_closeit = TRUE;
-	} else {
-		ct->ct_closeit = FALSE;
-	}
-
-	/*
-	 * Set up private data struct
-	 */
-	ct->ct_sock = *sockp;
-	ct->ct_wait.tv_usec = 0;
-	ct->ct_waitset = FALSE;
-	ct->ct_addr = *raddr;
-
-	/*
-	 * Initialize call message
-	 */
-	(void) gettimeofday(&now, (struct timezone *) 0);
-	call_msg.rm_xid = getpid() ^ now.tv_sec ^ now.tv_usec;
-	call_msg.rm_direction = CALL;
-	call_msg.rm_call.cb_rpcvers = RPC_MSG_VERSION;
-	call_msg.rm_call.cb_prog = prog;
-	call_msg.rm_call.cb_vers = vers;
-
-	/*
-	 * pre-serialize the staic part of the call msg and stash it away
-	 */
-	xdrmem_create(&(ct->ct_xdrs), ct->ct_mcall, MCALL_MSG_SIZE,
-				  XDR_ENCODE);
-	if (!xdr_callhdr(&(ct->ct_xdrs), &call_msg)) {
-		if (ct->ct_closeit) {
-			(void) close(*sockp);
-		}
-		goto fooy;
-	}
-	ct->ct_mpos = XDR_GETPOS(&(ct->ct_xdrs));
-	XDR_DESTROY(&(ct->ct_xdrs));
-
-	/*
-	 * Create a client handle which uses xdrrec for serialization
-	 * and authnone for authentication.
-	 */
-	xdrrec_create(&(ct->ct_xdrs), sendsz, recvsz,
-				  (caddr_t) ct, readtcp, writetcp);
-	h->cl_ops = &tcp_ops;
-	h->cl_private = (caddr_t) ct;
-	h->cl_auth = authnone_create();
-	return (h);
-
-  fooy:
-	/*
-	 * Something goofed, free stuff and barf
-	 */
-	mem_free((caddr_t) ct, sizeof(struct ct_data));
-
-	mem_free((caddr_t) h, sizeof(CLIENT));
-	return ((CLIENT *) NULL);
-}
-
-static enum clnt_stat
-clnttcp_call(h, proc, xdr_args, args_ptr, xdr_results, results_ptr,
-			 timeout)
-register CLIENT *h;
-u_long proc;
-xdrproc_t xdr_args;
-caddr_t args_ptr;
-xdrproc_t xdr_results;
-caddr_t results_ptr;
-struct timeval timeout;
-{
-	register struct ct_data *ct = (struct ct_data *) h->cl_private;
-	register XDR *xdrs = &(ct->ct_xdrs);
-	struct rpc_msg reply_msg;
-	u_long x_id;
-	u_long *msg_x_id = (u_long *) (ct->ct_mcall);	/* yuk */
-	register bool_t shipnow;
-	int refreshes = 2;
-
-	if (!ct->ct_waitset) {
-		ct->ct_wait = timeout;
-	}
-
-	shipnow =
-		(xdr_results == (xdrproc_t) 0 && timeout.tv_sec == 0
-		 && timeout.tv_usec == 0) ? FALSE : TRUE;
-
-  call_again:
-	xdrs->x_op = XDR_ENCODE;
-	ct->ct_error.re_status = RPC_SUCCESS;
-	x_id = ntohl(--(*msg_x_id));
-	if ((!XDR_PUTBYTES(xdrs, ct->ct_mcall, ct->ct_mpos)) ||
-		(!XDR_PUTLONG(xdrs, (long *) &proc)) ||
-		(!AUTH_MARSHALL(h->cl_auth, xdrs)) ||
-		(!(*xdr_args) (xdrs, args_ptr))) {
-		if (ct->ct_error.re_status == RPC_SUCCESS)
-			ct->ct_error.re_status = RPC_CANTENCODEARGS;
-		(void) xdrrec_endofrecord(xdrs, TRUE);
-		return (ct->ct_error.re_status);
-	}
-	if (!xdrrec_endofrecord(xdrs, shipnow))
-		return (ct->ct_error.re_status = RPC_CANTSEND);
-	if (!shipnow)
-		return (RPC_SUCCESS);
-	/*
-	 * Hack to provide rpc-based message passing
-	 */
-	if (timeout.tv_sec == 0 && timeout.tv_usec == 0) {
-		return (ct->ct_error.re_status = RPC_TIMEDOUT);
-	}
-
-
-	/*
-	 * Keep receiving until we get a valid transaction id
-	 */
-	xdrs->x_op = XDR_DECODE;
-	while (TRUE) {
-		reply_msg.acpted_rply.ar_verf = _null_auth;
-		reply_msg.acpted_rply.ar_results.where = NULL;
-		reply_msg.acpted_rply.ar_results.proc = (xdrproc_t)xdr_void;
-		if (!xdrrec_skiprecord(xdrs))
-			return (ct->ct_error.re_status);
-		/* now decode and validate the response header */
-		if (!xdr_replymsg(xdrs, &reply_msg)) {
-			if (ct->ct_error.re_status == RPC_SUCCESS)
-				continue;
-			return (ct->ct_error.re_status);
-		}
-		if (reply_msg.rm_xid == x_id)
-			break;
-	}
-
-	/*
-	 * process header
-	 */
-	_seterr_reply(&reply_msg, &(ct->ct_error));
-	if (ct->ct_error.re_status == RPC_SUCCESS) {
-		if (!AUTH_VALIDATE(h->cl_auth, &reply_msg.acpted_rply.ar_verf)) {
-			ct->ct_error.re_status = RPC_AUTHERROR;
-			ct->ct_error.re_why = AUTH_INVALIDRESP;
-		} else if (!(*xdr_results) (xdrs, results_ptr)) {
-			if (ct->ct_error.re_status == RPC_SUCCESS)
-				ct->ct_error.re_status = RPC_CANTDECODERES;
-		}
-		/* free verifier ... */
-		if (reply_msg.acpted_rply.ar_verf.oa_base != NULL) {
-			xdrs->x_op = XDR_FREE;
-			(void) xdr_opaque_auth(xdrs, &(reply_msg.acpted_rply.ar_verf));
-		}
-	} /* end successful completion */
-	else {
-		/* maybe our credentials need to be refreshed ... */
-		if (refreshes-- && AUTH_REFRESH(h->cl_auth))
-			goto call_again;
-	}							/* end of unsuccessful completion */
-	return (ct->ct_error.re_status);
-}
-
-static void clnttcp_geterr(h, errp)
-CLIENT *h;
-struct rpc_err *errp;
-{
-	register struct ct_data *ct = (struct ct_data *) h->cl_private;
-
-	*errp = ct->ct_error;
-}
-
-static bool_t clnttcp_freeres(cl, xdr_res, res_ptr)
-CLIENT *cl;
-xdrproc_t xdr_res;
-caddr_t res_ptr;
-{
-	register struct ct_data *ct = (struct ct_data *) cl->cl_private;
-	register XDR *xdrs = &(ct->ct_xdrs);
-
-	xdrs->x_op = XDR_FREE;
-	return ((*xdr_res) (xdrs, res_ptr));
-}
-
-static void clnttcp_abort()
-{
-}
-
-static bool_t clnttcp_control(cl, request, info)
-CLIENT *cl;
-int request;
-char *info;
-{
-	register struct ct_data *ct = (struct ct_data *) cl->cl_private;
-
-	switch (request) {
-	case CLSET_TIMEOUT:
-		ct->ct_wait = *(struct timeval *) info;
-		ct->ct_waitset = TRUE;
-		break;
-	case CLGET_TIMEOUT:
-		*(struct timeval *) info = ct->ct_wait;
-		break;
-	case CLGET_SERVER_ADDR:
-		*(struct sockaddr_in *) info = ct->ct_addr;
-		break;
-	default:
-		return (FALSE);
-	}
-	return (TRUE);
-}
-
-
-static void clnttcp_destroy(h)
-CLIENT *h;
-{
-	register struct ct_data *ct = (struct ct_data *) h->cl_private;
-
-	if (ct->ct_closeit) {
-		(void) close(ct->ct_sock);
-	}
-	XDR_DESTROY(&(ct->ct_xdrs));
-	mem_free((caddr_t) ct, sizeof(struct ct_data));
-
-	mem_free((caddr_t) h, sizeof(CLIENT));
-}
-
-/*
- * Interface between xdr serializer and tcp connection.
- * Behaves like the system calls, read & write, but keeps some error state
- * around for the rpc level.
- */
-static int readtcp(ct, buf, len)
-register struct ct_data *ct;
-caddr_t buf;
-register int len;
-{
-#ifdef FD_SETSIZE
-	fd_set mask;
-	fd_set readfds;
-
-	if (len == 0)
-		return (0);
-	FD_ZERO(&mask);
-	FD_SET(ct->ct_sock, &mask);
-#else
-	register int mask = 1 << (ct->ct_sock);
-	int readfds;
-
-	if (len == 0)
-		return (0);
-
-#endif							/* def FD_SETSIZE */
-	while (TRUE) {
-		readfds = mask;
-		switch (select
-				(_rpc_dtablesize(), &readfds, 0, 0,
-				 &(ct->ct_wait))) {
-		case 0:
-			ct->ct_error.re_status = RPC_TIMEDOUT;
-			return (-1);
-
-		case -1:
-			if (errno == EINTR)
-				continue;
-			ct->ct_error.re_status = RPC_CANTRECV;
-			ct->ct_error.re_errno = errno;
-			return (-1);
-		}
-		break;
-	}
-	switch (len = read(ct->ct_sock, buf, len)) {
-
-	case 0:
-		/* premature eof */
-		ct->ct_error.re_errno = ECONNRESET;
-		ct->ct_error.re_status = RPC_CANTRECV;
-		len = -1;				/* it's really an error */
-		break;
-
-	case -1:
-		ct->ct_error.re_errno = errno;
-		ct->ct_error.re_status = RPC_CANTRECV;
-		break;
-	}
-	return (len);
-}
-
-static int writetcp(ct, buf, len)
-struct ct_data *ct;
-caddr_t buf;
-int len;
-{
-	register int i, cnt;
-
-	for (cnt = len; cnt > 0; cnt -= i, buf += i) {
-		if ((i = write(ct->ct_sock, buf, cnt)) == -1) {
-			ct->ct_error.re_errno = errno;
-			ct->ct_error.re_status = RPC_CANTSEND;
-			return (-1);
-		}
-	}
-	return (len);
-}
diff --git a/mdk-stage1/dietlibc/librpc/clnt_udp.c b/mdk-stage1/dietlibc/librpc/clnt_udp.c
deleted file mode 100644
index 7305d3ff1..000000000
--- a/mdk-stage1/dietlibc/librpc/clnt_udp.c
+++ /dev/null
@@ -1,437 +0,0 @@
-/* @(#)clnt_udp.c	2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)clnt_udp.c 1.39 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * clnt_udp.c, Implements a UDP/IP based, client side RPC.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <stdio.h>
-#include <rpc/rpc.h>
-#include <sys/socket.h>
-#include <sys/ioctl.h>
-#include <netdb.h>
-#include <errno.h>
-#include <rpc/pmap_clnt.h>
-#include <unistd.h>
-
-extern int errno;
-
-/*
- * UDP bases client side rpc operations
- */
-static enum clnt_stat clntudp_call();
-static void clntudp_abort();
-static void clntudp_geterr();
-static bool_t clntudp_freeres();
-static bool_t clntudp_control();
-static void clntudp_destroy();
-
-static struct clnt_ops udp_ops = {
-	clntudp_call,
-	clntudp_abort,
-	clntudp_geterr,
-	clntudp_freeres,
-	clntudp_destroy,
-	clntudp_control
-};
-
-/* 
- * Private data kept per client handle
- */
-struct cu_data {
-	int cu_sock;
-	bool_t cu_closeit;
-	struct sockaddr_in cu_raddr;
-	int cu_rlen;
-	struct timeval cu_wait;
-	struct timeval cu_total;
-	struct rpc_err cu_error;
-	XDR cu_outxdrs;
-	u_int cu_xdrpos;
-	u_int cu_sendsz;
-	char *cu_outbuf;
-	u_int cu_recvsz;
-	char cu_inbuf[1];
-};
-
-/*
- * Create a UDP based client handle.
- * If *sockp<0, *sockp is set to a newly created UPD socket.
- * If raddr->sin_port is 0 a binder on the remote machine
- * is consulted for the correct port number.
- * NB: It is the clients responsibility to close *sockp.
- * NB: The rpch->cl_auth is initialized to null authentication.
- *     Caller may wish to set this something more useful.
- *
- * wait is the amount of time used between retransmitting a call if
- * no response has been heard;  retransmition occurs until the actual
- * rpc call times out.
- *
- * sendsz and recvsz are the maximum allowable packet sizes that can be
- * sent and received.
- */
-CLIENT *clntudp_bufcreate(raddr, program, version, wait, sockp, sendsz,
-						  recvsz)
-struct sockaddr_in *raddr;
-u_long program;
-u_long version;
-struct timeval wait;
-register int *sockp;
-u_int sendsz;
-u_int recvsz;
-{
-	CLIENT *cl;
-	register struct cu_data *cu;
-	struct timeval now;
-	struct rpc_msg call_msg;
-
-	cl = (CLIENT *) mem_alloc(sizeof(CLIENT));
-	if (cl == NULL) {
-		(void) fprintf(stderr, "clntudp_create: out of memory\n");
-		rpc_createerr.cf_stat = RPC_SYSTEMERROR;
-		rpc_createerr.cf_error.re_errno = errno;
-		goto fooy;
-	}
-	sendsz = ((sendsz + 3) / 4) * 4;
-	recvsz = ((recvsz + 3) / 4) * 4;
-	cu = (struct cu_data *) mem_alloc(sizeof(*cu) + sendsz + recvsz);
-	if (cu == NULL) {
-		(void) fprintf(stderr, "clntudp_create: out of memory\n");
-		rpc_createerr.cf_stat = RPC_SYSTEMERROR;
-		rpc_createerr.cf_error.re_errno = errno;
-		goto fooy;
-	}
-	cu->cu_outbuf = &cu->cu_inbuf[recvsz];
-
-	(void) gettimeofday(&now, (struct timezone *) 0);
-	if (raddr->sin_port == 0) {
-		u_short port;
-
-		if ((port =
-			 pmap_getport(raddr, program, version, IPPROTO_UDP)) == 0) {
-			goto fooy;
-		}
-		raddr->sin_port = htons(port);
-	}
-	cl->cl_ops = &udp_ops;
-	cl->cl_private = (caddr_t) cu;
-	cu->cu_raddr = *raddr;
-	cu->cu_rlen = sizeof(cu->cu_raddr);
-	cu->cu_wait = wait;
-	cu->cu_total.tv_sec = -1;
-	cu->cu_total.tv_usec = -1;
-	cu->cu_sendsz = sendsz;
-	cu->cu_recvsz = recvsz;
-	call_msg.rm_xid = getpid() ^ now.tv_sec ^ now.tv_usec;
-	call_msg.rm_direction = CALL;
-	call_msg.rm_call.cb_rpcvers = RPC_MSG_VERSION;
-	call_msg.rm_call.cb_prog = program;
-	call_msg.rm_call.cb_vers = version;
-	xdrmem_create(&(cu->cu_outxdrs), cu->cu_outbuf, sendsz, XDR_ENCODE);
-	if (!xdr_callhdr(&(cu->cu_outxdrs), &call_msg)) {
-		goto fooy;
-	}
-	cu->cu_xdrpos = XDR_GETPOS(&(cu->cu_outxdrs));
-	if (*sockp < 0) {
-		int dontblock = 1;
-
-		*sockp = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
-		if (*sockp < 0) {
-			rpc_createerr.cf_stat = RPC_SYSTEMERROR;
-			rpc_createerr.cf_error.re_errno = errno;
-			goto fooy;
-		}
-		/* attempt to bind to prov port */
-		(void) bindresvport(*sockp, (struct sockaddr_in *) 0);
-		/* the sockets rpc controls are non-blocking */
-		(void) ioctl(*sockp, FIONBIO, (char *) &dontblock);
-		cu->cu_closeit = TRUE;
-	} else {
-		cu->cu_closeit = FALSE;
-	}
-	cu->cu_sock = *sockp;
-	cl->cl_auth = authnone_create();
-	return (cl);
-  fooy:
-	if (cu)
-		mem_free((caddr_t) cu, sizeof(*cu) + sendsz + recvsz);
-	if (cl)
-		mem_free((caddr_t) cl, sizeof(CLIENT));
-	return ((CLIENT *) NULL);
-}
-
-CLIENT *clntudp_create(raddr, program, version, wait, sockp)
-struct sockaddr_in *raddr;
-u_long program;
-u_long version;
-struct timeval wait;
-register int *sockp;
-{
-
-	return (clntudp_bufcreate(raddr, program, version, wait, sockp,
-							  UDPMSGSIZE, UDPMSGSIZE));
-}
-
-static enum clnt_stat
-clntudp_call(cl, proc, xargs, argsp, xresults, resultsp, utimeout)
-register CLIENT *cl;			/* client handle */
-u_long proc;					/* procedure number */
-xdrproc_t xargs;				/* xdr routine for args */
-caddr_t argsp;					/* pointer to args */
-xdrproc_t xresults;				/* xdr routine for results */
-caddr_t resultsp;				/* pointer to results */
-struct timeval utimeout;		/* seconds to wait before giving up */
-{
-	register struct cu_data *cu = (struct cu_data *) cl->cl_private;
-	register XDR *xdrs;
-	register int outlen;
-	register int inlen;
-	int fromlen;
-
-#ifdef FD_SETSIZE
-	fd_set readfds;
-	fd_set mask;
-#else
-	int readfds;
-	register int mask;
-#endif							/* def FD_SETSIZE */
-	struct sockaddr_in from;
-	struct rpc_msg reply_msg;
-	XDR reply_xdrs;
-	struct timeval time_waited;
-	bool_t ok;
-	int nrefreshes = 2;			/* number of times to refresh cred */
-	struct timeval timeout;
-
-	if (cu->cu_total.tv_usec == -1) {
-		timeout = utimeout;		/* use supplied timeout */
-	} else {
-		timeout = cu->cu_total;	/* use default timeout */
-	}
-
-	time_waited.tv_sec = 0;
-	time_waited.tv_usec = 0;
-  call_again:
-	xdrs = &(cu->cu_outxdrs);
-	xdrs->x_op = XDR_ENCODE;
-	XDR_SETPOS(xdrs, cu->cu_xdrpos);
-	/*
-	 * the transaction is the first thing in the out buffer
-	 */
-	(*(u_short *) (cu->cu_outbuf))++;
-	if ((!XDR_PUTLONG(xdrs, (long *) &proc)) ||
-		(!AUTH_MARSHALL(cl->cl_auth, xdrs)) || (!(*xargs) (xdrs, argsp)))
-		return (cu->cu_error.re_status = RPC_CANTENCODEARGS);
-	outlen = (int) XDR_GETPOS(xdrs);
-
-  send_again:
-	if (sendto(cu->cu_sock, cu->cu_outbuf, outlen, 0,
-			   (struct sockaddr *) &(cu->cu_raddr), cu->cu_rlen)
-		!= outlen) {
-		cu->cu_error.re_errno = errno;
-		return (cu->cu_error.re_status = RPC_CANTSEND);
-	}
-
-	/*
-	 * Hack to provide rpc-based message passing
-	 */
-	if (timeout.tv_sec == 0 && timeout.tv_usec == 0) {
-		return (cu->cu_error.re_status = RPC_TIMEDOUT);
-	}
-	/*
-	 * sub-optimal code appears here because we have
-	 * some clock time to spare while the packets are in flight.
-	 * (We assume that this is actually only executed once.)
-	 */
-	reply_msg.acpted_rply.ar_verf = _null_auth;
-	reply_msg.acpted_rply.ar_results.where = resultsp;
-	reply_msg.acpted_rply.ar_results.proc = xresults;
-#ifdef FD_SETSIZE
-	FD_ZERO(&mask);
-	FD_SET(cu->cu_sock, &mask);
-#else
-	mask = 1 << cu->cu_sock;
-#endif							/* def FD_SETSIZE */
-	for (;;) {
-		readfds = mask;
-		switch (select(_rpc_dtablesize(), &readfds, 0, 0, &(cu->cu_wait))) {
-
-		case 0:
-			time_waited.tv_sec += cu->cu_wait.tv_sec;
-			time_waited.tv_usec += cu->cu_wait.tv_usec;
-			while (time_waited.tv_usec >= 1000000) {
-				time_waited.tv_sec++;
-				time_waited.tv_usec -= 1000000;
-			}
-			if ((time_waited.tv_sec < timeout.tv_sec) ||
-				((time_waited.tv_sec == timeout.tv_sec) &&
-				 (time_waited.tv_usec < timeout.tv_usec)))
-				goto send_again;
-			return (cu->cu_error.re_status = RPC_TIMEDOUT);
-
-			/*
-			 * buggy in other cases because time_waited is not being
-			 * updated.
-			 */
-		case -1:
-			if (errno == EINTR)
-				continue;
-			cu->cu_error.re_errno = errno;
-			return (cu->cu_error.re_status = RPC_CANTRECV);
-		}
-		do {
-			fromlen = sizeof(struct sockaddr);
-
-			inlen = recvfrom(cu->cu_sock, cu->cu_inbuf,
-							 (int) cu->cu_recvsz, 0,
-							 (struct sockaddr *) &from, &fromlen);
-		} while (inlen < 0 && errno == EINTR);
-		if (inlen < 0) {
-			if (errno == EWOULDBLOCK)
-				continue;
-			cu->cu_error.re_errno = errno;
-			return (cu->cu_error.re_status = RPC_CANTRECV);
-		}
-		if (inlen < sizeof(u_long))
-			continue;
-		/* see if reply transaction id matches sent id */
-		if (*((u_long *) (cu->cu_inbuf)) != *((u_long *) (cu->cu_outbuf)))
-			continue;
-		/* we now assume we have the proper reply */
-		break;
-	}
-
-	/*
-	 * now decode and validate the response
-	 */
-	xdrmem_create(&reply_xdrs, cu->cu_inbuf, (u_int) inlen, XDR_DECODE);
-	ok = xdr_replymsg(&reply_xdrs, &reply_msg);
-	/* XDR_DESTROY(&reply_xdrs);  save a few cycles on noop destroy */
-	if (ok) {
-		_seterr_reply(&reply_msg, &(cu->cu_error));
-		if (cu->cu_error.re_status == RPC_SUCCESS) {
-			if (!AUTH_VALIDATE(cl->cl_auth,
-							   &reply_msg.acpted_rply.ar_verf)) {
-				cu->cu_error.re_status = RPC_AUTHERROR;
-				cu->cu_error.re_why = AUTH_INVALIDRESP;
-			}
-			if (reply_msg.acpted_rply.ar_verf.oa_base != NULL) {
-				xdrs->x_op = XDR_FREE;
-				(void) xdr_opaque_auth(xdrs,
-									   &(reply_msg.acpted_rply.ar_verf));
-			}
-		} /* end successful completion */
-		else {
-			/* maybe our credentials need to be refreshed ... */
-			if (nrefreshes > 0 && AUTH_REFRESH(cl->cl_auth)) {
-				nrefreshes--;
-				goto call_again;
-			}
-		}						/* end of unsuccessful completion */
-	} /* end of valid reply message */
-	else {
-		cu->cu_error.re_status = RPC_CANTDECODERES;
-	}
-	return (cu->cu_error.re_status);
-}
-
-static void clntudp_geterr(cl, errp)
-CLIENT *cl;
-struct rpc_err *errp;
-{
-	register struct cu_data *cu = (struct cu_data *) cl->cl_private;
-
-	*errp = cu->cu_error;
-}
-
-
-static bool_t clntudp_freeres(cl, xdr_res, res_ptr)
-CLIENT *cl;
-xdrproc_t xdr_res;
-caddr_t res_ptr;
-{
-	register struct cu_data *cu = (struct cu_data *) cl->cl_private;
-	register XDR *xdrs = &(cu->cu_outxdrs);
-
-	xdrs->x_op = XDR_FREE;
-	return ((*xdr_res) (xdrs, res_ptr));
-}
-
-static void clntudp_abort( /*h */ )
-	/*CLIENT *h; */
-{
-}
-
-static bool_t clntudp_control(cl, request, info)
-CLIENT *cl;
-int request;
-char *info;
-{
-	register struct cu_data *cu = (struct cu_data *) cl->cl_private;
-
-	switch (request) {
-	case CLSET_TIMEOUT:
-		cu->cu_total = *(struct timeval *) info;
-		break;
-	case CLGET_TIMEOUT:
-		*(struct timeval *) info = cu->cu_total;
-		break;
-	case CLSET_RETRY_TIMEOUT:
-		cu->cu_wait = *(struct timeval *) info;
-		break;
-	case CLGET_RETRY_TIMEOUT:
-		*(struct timeval *) info = cu->cu_wait;
-		break;
-	case CLGET_SERVER_ADDR:
-		*(struct sockaddr_in *) info = cu->cu_raddr;
-		break;
-	default:
-		return (FALSE);
-	}
-	return (TRUE);
-}
-
-static void clntudp_destroy(cl)
-CLIENT *cl;
-{
-	register struct cu_data *cu = (struct cu_data *) cl->cl_private;
-
-	if (cu->cu_closeit) {
-		(void) close(cu->cu_sock);
-	}
-	XDR_DESTROY(&(cu->cu_outxdrs));
-	mem_free((caddr_t) cu, (sizeof(*cu) + cu->cu_sendsz + cu->cu_recvsz));
-	mem_free((caddr_t) cl, sizeof(CLIENT));
-}
diff --git a/mdk-stage1/dietlibc/librpc/get_myaddress.c b/mdk-stage1/dietlibc/librpc/get_myaddress.c
deleted file mode 100644
index cd63383d0..000000000
--- a/mdk-stage1/dietlibc/librpc/get_myaddress.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* @(#)get_myaddress.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)get_myaddress.c 1.4 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * get_myaddress.c
- *
- * Get client's IP address via ioctl.  This avoids using the yellowpages.
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/types.h>
-#include <rpc/pmap_prot.h>
-#include <sys/socket.h>
-#include <stdio.h>
-//#include <net/if.h>
-#include <sys/ioctl.h>
-#include <arpa/inet.h>
-#include <netinet/in.h>
-
-/* DO use gethostbyname because it's portable */
-#include <unistd.h>
-#include <netdb.h>
-#include <string.h>
-void get_myaddress(struct sockaddr_in* addr)
-{
-	char localhost[256 + 1];
-	struct hostent *hp;
-
-	gethostname(localhost, 256);
-	if ((hp = gethostbyname(localhost)) == NULL) {
-		perror("get_myaddress: gethostbyname");
-		exit(1);
-	}
-	addr->sin_family = AF_INET;
-	bcopy((char *) hp->h_addr, (char *) &addr->sin_addr, hp->h_length);
-	addr->sin_port = htons(PMAPPORT);
-}
diff --git a/mdk-stage1/dietlibc/librpc/getrpcent.c b/mdk-stage1/dietlibc/librpc/getrpcent.c
deleted file mode 100644
index 5e7f694d2..000000000
--- a/mdk-stage1/dietlibc/librpc/getrpcent.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/* @(#)getrpcent.c	2.2 88/07/29 4.0 RPCSRC */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)getrpcent.c 1.9 87/08/11  Copyr 1984 Sun Micro";
-#endif
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-/*
- * Copyright (c) 1985 by Sun Microsystems, Inc.
- */
-
-#include <stdio.h>
-#include <sys/types.h>
-#include <rpc/rpc.h>
-#include <netdb.h>
-#include <sys/socket.h>
-#include <string.h>
-
-/*
- * Internet version.
- */
-struct rpcdata {
-	FILE *rpcf;
-	char *current;
-	int currentlen;
-	int stayopen;
-#define	MAXALIASES	35
-	char *rpc_aliases[MAXALIASES];
-	struct rpcent rpc;
-	char line[BUFSIZ + 1];
-	char *domain;
-} *rpcdata;
-
-static struct rpcent *interpret();
-struct hostent *gethostent();
-char *inet_ntoa();
-
-#ifndef __linux__
-static char *index();
-#else
-char *index();
-#endif
-
-static char RPCDB[] = "/etc/rpc";
-
-static struct rpcdata *_rpcdata()
-{
-	register struct rpcdata *d = rpcdata;
-
-	if (d == 0) {
-		d = (struct rpcdata *) calloc(1, sizeof(struct rpcdata));
-
-		rpcdata = d;
-	}
-	return (d);
-}
-
-struct rpcent *getrpcbynumber(number)
-register int number;
-{
-	register struct rpcdata *d = _rpcdata();
-	register struct rpcent *p;
-
-	if (d == 0)
-		return (0);
-	setrpcent(0);
-	while ((p = getrpcent())) {
-		if (p->r_number == number)
-			break;
-	}
-	endrpcent();
-	return (p);
-}
-
-struct rpcent *
-#ifdef __linux__
-getrpcbyname(const char *name)
-#else
-getrpcbyname(name)
-char *name;
-#endif
-{
-	struct rpcent *rpc;
-	char **rp;
-
-	setrpcent(0);
-	while ((rpc = getrpcent())) {
-		if (strcmp(rpc->r_name, name) == 0)
-			return (rpc);
-		for (rp = rpc->r_aliases; *rp != NULL; rp++) {
-			if (strcmp(*rp, name) == 0)
-				return (rpc);
-		}
-	}
-	endrpcent();
-	return (NULL);
-}
-
-#ifdef __linux__
-void
-#endif
-setrpcent(f)
-int f;
-{
-	register struct rpcdata *d = _rpcdata();
-
-	if (d == 0)
-		return;
-	if (d->rpcf == NULL)
-		d->rpcf = fopen(RPCDB, "r");
-	else
-		rewind(d->rpcf);
-	if (d->current)
-		free(d->current);
-	d->current = NULL;
-	d->stayopen |= f;
-}
-
-#ifdef __linux__
-void
-#endif
-endrpcent()
-{
-	register struct rpcdata *d = _rpcdata();
-
-	if (d == 0)
-		return;
-	if (d->current && !d->stayopen) {
-		free(d->current);
-		d->current = NULL;
-	}
-	if (d->rpcf && !d->stayopen) {
-		fclose(d->rpcf);
-		d->rpcf = NULL;
-	}
-}
-
-struct rpcent *getrpcent()
-{
-	register struct rpcdata *d = _rpcdata();
-
-	if (d == 0)
-		return (NULL);
-	if (d->rpcf == NULL && (d->rpcf = fopen(RPCDB, "r")) == NULL)
-		return (NULL);
-	if (fgets(d->line, BUFSIZ, d->rpcf) == NULL)
-		return (NULL);
-	return interpret(d->line, strlen(d->line));
-}
-
-#ifdef __linux__
-static char *firstwhite(s)
-char *s;
-{
-	char *s1, *s2;
-
-	s1 = index(s, ' ');
-	s2 = index(s, '\t');
-	if (s1) {
-		if (s2)
-			return (s1 < s2) ? s1 : s2;
-		else
-			return s1;
-	} else
-		return s2;
-}
-#endif
-
-static struct rpcent *interpret(const char* val, int len)
-{
-	register struct rpcdata *d = _rpcdata();
-	char *p;
-	register char *cp, **q;
-
-	if (d == 0)
-		return 0;
-	strncpy(d->line, val, len);
-	p = d->line;
-	d->line[len] = '\n';
-	if (*p == '#')
-		return (getrpcent());
-	cp = index(p, '#');
-	if (cp == NULL) {
-		cp = index(p, '\n');
-		if (cp == NULL)
-			return (getrpcent());
-	}
-	*cp = '\0';
-#ifdef __linux__
-	if ((cp = firstwhite(p)))
-		*cp++ = 0;
-	else
-		return (getrpcent());
-#else
-	cp = index(p, ' ');
-	if (cp == NULL) {
-		cp = index(p, '\t');
-		if (cp == NULL)
-			return (getrpcent());
-	}
-	*cp++ = '\0';
-#endif
-	/* THIS STUFF IS INTERNET SPECIFIC */
-	d->rpc.r_name = d->line;
-	while (*cp == ' ' || *cp == '\t')
-		cp++;
-	d->rpc.r_number = atoi(cp);
-	q = d->rpc.r_aliases = d->rpc_aliases;
-#ifdef __linux__
-	if ((cp = firstwhite(cp)))
-		*cp++ = '\0';
-#else
-	cp = index(p, ' ');
-	if (cp != NULL)
-		*cp++ = '\0';
-	else {
-		cp = index(p, '\t');
-		if (cp != NULL)
-			*cp++ = '\0';
-	}
-#endif
-	while (cp && *cp) {
-		if (*cp == ' ' || *cp == '\t') {
-			cp++;
-			continue;
-		}
-		if (q < &(d->rpc_aliases[MAXALIASES - 1]))
-			*q++ = cp;
-#ifdef __linux__
-		if ((cp = firstwhite(cp)))
-			*cp++ = '\0';
-#else
-		cp = index(p, ' ');
-		if (cp != NULL)
-			*cp++ = '\0';
-		else {
-			cp = index(p, '\t');
-			if (cp != NULL)
-				*cp++ = '\0';
-		}
-#endif
-	}
-	*q = NULL;
-	return (&d->rpc);
-}
diff --git a/mdk-stage1/dietlibc/librpc/getrpcport.c b/mdk-stage1/dietlibc/librpc/getrpcport.c
deleted file mode 100644
index a7085cbe7..000000000
--- a/mdk-stage1/dietlibc/librpc/getrpcport.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* @(#)getrpcport.c	2.1 88/07/29 4.0 RPCSRC */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)getrpcport.c 1.3 87/08/11 SMI";
-#endif
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-/*
- * Copyright (c) 1985 by Sun Microsystems, Inc.
- */
-
-#include <stdio.h>
-#include <rpc/rpc.h>
-#include <netdb.h>
-#include <sys/socket.h>
-#include <string.h>
-#include <rpc/pmap_clnt.h>
-
-extern int getrpcport (const char * host, u_long prognum,
-			   u_long versnum, u_int proto)
-{
-	struct sockaddr_in addr;
-	struct hostent *hp;
-
-	if ((hp = gethostbyname(host)) == NULL)
-		return (0);
-	bcopy(hp->h_addr, (char *) &addr.sin_addr, hp->h_length);
-	addr.sin_family = AF_INET;
-	addr.sin_port = 0;
-	return (pmap_getport(&addr, prognum, versnum, proto));
-}
diff --git a/mdk-stage1/dietlibc/librpc/pmap_clnt.c b/mdk-stage1/dietlibc/librpc/pmap_clnt.c
deleted file mode 100644
index 428675656..000000000
--- a/mdk-stage1/dietlibc/librpc/pmap_clnt.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/* @(#)pmap_clnt.c	2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)pmap_clnt.c 1.37 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * pmap_clnt.c
- * Client interface to pmap rpc service.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/rpc.h>
-#include <rpc/pmap_prot.h>
-#include <rpc/pmap_clnt.h>
-#include <unistd.h>
-
-static struct timeval timeout = { 5, 0 };
-static struct timeval tottimeout = { 60, 0 };
-
-void clnt_perror();
-
-
-/*
- * Set a mapping between program,version and port.
- * Calls the pmap service remotely to do the mapping.
- */
-bool_t pmap_set(program, version, protocol, port)
-u_long program;
-u_long version;
-int protocol;
-u_short port;
-{
-	struct sockaddr_in myaddress;
-	int socket = -1;
-	register CLIENT *client;
-	struct pmap parms;
-	bool_t rslt;
-
-	get_myaddress(&myaddress);
-	client = clntudp_bufcreate(&myaddress, PMAPPROG, PMAPVERS,
-							   timeout, &socket, RPCSMALLMSGSIZE,
-							   RPCSMALLMSGSIZE);
-	if (client == (CLIENT *) NULL)
-		return (FALSE);
-	parms.pm_prog = program;
-	parms.pm_vers = version;
-	parms.pm_prot = protocol;
-	parms.pm_port = port;
-	if (CLNT_CALL(client, PMAPPROC_SET, (xdrproc_t)xdr_pmap, (caddr_t)&parms, (xdrproc_t)xdr_bool, (caddr_t)&rslt,
-				  tottimeout) != RPC_SUCCESS) {
-		clnt_perror(client, "Cannot register service");
-		return (FALSE);
-	}
-	CLNT_DESTROY(client);
-	(void) close(socket);
-	return (rslt);
-}
-
-/*
- * Remove the mapping between program,version and port.
- * Calls the pmap service remotely to do the un-mapping.
- */
-bool_t pmap_unset(program, version)
-u_long program;
-u_long version;
-{
-	struct sockaddr_in myaddress;
-	int socket = -1;
-	register CLIENT *client;
-	struct pmap parms;
-	bool_t rslt;
-
-	get_myaddress(&myaddress);
-	client = clntudp_bufcreate(&myaddress, PMAPPROG, PMAPVERS,
-							   timeout, &socket, RPCSMALLMSGSIZE,
-							   RPCSMALLMSGSIZE);
-	if (client == (CLIENT *) NULL)
-		return (FALSE);
-	parms.pm_prog = program;
-	parms.pm_vers = version;
-	parms.pm_port = parms.pm_prot = 0;
-	CLNT_CALL(client, PMAPPROC_UNSET, (xdrproc_t)xdr_pmap, (caddr_t)&parms, (xdrproc_t)xdr_bool, (caddr_t)&rslt,
-			  tottimeout);
-	CLNT_DESTROY(client);
-	(void) close(socket);
-	return (rslt);
-}
diff --git a/mdk-stage1/dietlibc/librpc/pmap_getmaps.c b/mdk-stage1/dietlibc/librpc/pmap_getmaps.c
deleted file mode 100644
index 6940783fb..000000000
--- a/mdk-stage1/dietlibc/librpc/pmap_getmaps.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* @(#)pmap_getmaps.c	2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)pmap_getmaps.c 1.10 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * pmap_getmap.c
- * Client interface to pmap rpc service.
- * contains pmap_getmaps, which is only tcp service involved
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/rpc.h>
-#include <rpc/pmap_prot.h>
-#include <rpc/pmap_clnt.h>
-#include <sys/socket.h>
-#include <netdb.h>
-#include <stdio.h>
-#include <errno.h>
-//#include <net/if.h>
-#include <sys/ioctl.h>
-#define NAMELEN 255
-#define MAX_BROADCAST_SIZE 1400
-#include <unistd.h>
-
-extern int errno;
-
-/*
- * Get a copy of the current port maps.
- * Calls the pmap service remotely to do get the maps.
- */
-struct pmaplist *pmap_getmaps(address)
-struct sockaddr_in *address;
-{
-	struct pmaplist *head = (struct pmaplist *) NULL;
-	int socket = -1;
-	struct timeval minutetimeout;
-	register CLIENT *client;
-
-	minutetimeout.tv_sec = 60;
-	minutetimeout.tv_usec = 0;
-	address->sin_port = htons(PMAPPORT);
-	client = clnttcp_create(address, PMAPPROG, PMAPVERS, &socket, 50, 500);
-	if (client != (CLIENT *) NULL) {
-		if (CLNT_CALL(client, PMAPPROC_DUMP, (xdrproc_t)xdr_void, NULL, (xdrproc_t)xdr_pmaplist,
-					  (caddr_t)&head, minutetimeout) != RPC_SUCCESS) {
-			clnt_perror(client, "pmap_getmaps rpc problem");
-		}
-		CLNT_DESTROY(client);
-	}
-	(void) close(socket);
-	address->sin_port = 0;
-	return (head);
-}
diff --git a/mdk-stage1/dietlibc/librpc/pmap_getport.c b/mdk-stage1/dietlibc/librpc/pmap_getport.c
deleted file mode 100644
index 174dca41a..000000000
--- a/mdk-stage1/dietlibc/librpc/pmap_getport.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/* @(#)pmap_getport.c	2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)pmap_getport.c 1.9 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * pmap_getport.c
- * Client interface to pmap rpc service.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/rpc.h>
-#include <rpc/pmap_prot.h>
-#include <rpc/pmap_clnt.h>
-#include <sys/socket.h>
-//#include <net/if.h>
-#include <unistd.h>
-
-static struct timeval timeout = { 5, 0 };
-static struct timeval tottimeout = { 60, 0 };
-
-/*
- * Find the mapped port for program,version.
- * Calls the pmap service remotely to do the lookup.
- * Returns 0 if no map exists.
- */
-u_short pmap_getport(address, program, version, protocol)
-struct sockaddr_in *address;
-u_long program;
-u_long version;
-u_int protocol;
-{
-	u_short port = 0;
-	int socket = -1;
-	register CLIENT *client;
-	struct pmap parms;
-
-	address->sin_port = htons(PMAPPORT);
-	client = clntudp_bufcreate(address, PMAPPROG,
-							   PMAPVERS, timeout, &socket, RPCSMALLMSGSIZE,
-							   RPCSMALLMSGSIZE);
-	if (client != (CLIENT *) NULL) {
-		parms.pm_prog = program;
-		parms.pm_vers = version;
-		parms.pm_prot = protocol;
-		parms.pm_port = 0;		/* not needed or used */
-		if (CLNT_CALL(client, PMAPPROC_GETPORT, (xdrproc_t)xdr_pmap, (caddr_t)&parms,
-					  (xdrproc_t)xdr_u_short, (caddr_t)&port, tottimeout) != RPC_SUCCESS) {
-			rpc_createerr.cf_stat = RPC_PMAPFAILURE;
-			clnt_geterr(client, &rpc_createerr.cf_error);
-		} else if (port == 0) {
-			rpc_createerr.cf_stat = RPC_PROGNOTREGISTERED;
-		}
-		CLNT_DESTROY(client);
-	}
-	(void) close(socket);
-	address->sin_port = 0;
-	return (port);
-}
diff --git a/mdk-stage1/dietlibc/librpc/pmap_prot.c b/mdk-stage1/dietlibc/librpc/pmap_prot.c
deleted file mode 100644
index ec8b5af79..000000000
--- a/mdk-stage1/dietlibc/librpc/pmap_prot.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/* @(#)pmap_prot.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)pmap_prot.c 1.17 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * pmap_prot.c
- * Protocol for the local binder service, or pmap.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <rpc/pmap_prot.h>
-
-
-bool_t xdr_pmap(xdrs, regs)
-XDR *xdrs;
-struct pmap *regs;
-{
-
-	if (xdr_u_long(xdrs, &regs->pm_prog) &&
-		xdr_u_long(xdrs, &regs->pm_vers) &&
-		xdr_u_long(xdrs, &regs->pm_prot))
-			return (xdr_u_long(xdrs, &regs->pm_port));
-	return (FALSE);
-}
diff --git a/mdk-stage1/dietlibc/librpc/pmap_prot2.c b/mdk-stage1/dietlibc/librpc/pmap_prot2.c
deleted file mode 100644
index 870c844ed..000000000
--- a/mdk-stage1/dietlibc/librpc/pmap_prot2.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/* @(#)pmap_prot2.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)pmap_prot2.c 1.3 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * pmap_prot2.c
- * Protocol for the local binder service, or pmap.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <rpc/pmap_prot.h>
-
-
-/* 
- * What is going on with linked lists? (!)
- * First recall the link list declaration from pmap_prot.h:
- *
- * struct pmaplist {
- *	struct pmap pml_map;
- *	struct pmaplist *pml_map;
- * };
- *
- * Compare that declaration with a corresponding xdr declaration that 
- * is (a) pointer-less, and (b) recursive:
- *
- * typedef union switch (bool_t) {
- * 
- *	case TRUE: struct {
- *		struct pmap;
- * 		pmaplist_t foo;
- *	};
- *
- *	case FALSE: struct {};
- * } pmaplist_t;
- *
- * Notice that the xdr declaration has no nxt pointer while
- * the C declaration has no bool_t variable.  The bool_t can be
- * interpreted as ``more data follows me''; if FALSE then nothing
- * follows this bool_t; if TRUE then the bool_t is followed by
- * an actual struct pmap, and then (recursively) by the 
- * xdr union, pamplist_t.  
- *
- * This could be implemented via the xdr_union primitive, though this
- * would cause a one recursive call per element in the list.  Rather than do
- * that we can ``unwind'' the recursion
- * into a while loop and do the union arms in-place.
- *
- * The head of the list is what the C programmer wishes to past around
- * the net, yet is the data that the pointer points to which is interesting;
- * this sounds like a job for xdr_reference!
- */
-bool_t xdr_pmaplist(XDR* xdrs, struct pmaplist** rp)
-{
-	/*
-	 * more_elements is pre-computed in case the direction is
-	 * XDR_ENCODE or XDR_FREE.  more_elements is overwritten by
-	 * xdr_bool when the direction is XDR_DECODE.
-	 */
-	bool_t more_elements;
-	register int freeing = (xdrs->x_op == XDR_FREE);
-	register struct pmaplist **next=0;
-
-	while (TRUE) {
-		more_elements = (bool_t) (*rp != NULL);
-		if (!xdr_bool(xdrs, &more_elements))
-			return (FALSE);
-		if (!more_elements)
-			return (TRUE);		/* we are done */
-		/*
-		 * the unfortunate side effect of non-recursion is that in
-		 * the case of freeing we must remember the next object
-		 * before we free the current object ...
-		 */
-		if (freeing)
-			next = &((*rp)->pml_next);
-		if (!xdr_reference(xdrs, (caddr_t *) rp,
-						   (u_int) sizeof(struct pmaplist), (xdrproc_t)xdr_pmap))
-			return (FALSE);
-
-		rp = (freeing) ? next : &((*rp)->pml_next);
-	}
-}
diff --git a/mdk-stage1/dietlibc/librpc/pmap_rmt.c b/mdk-stage1/dietlibc/librpc/pmap_rmt.c
deleted file mode 100644
index 02efcf91c..000000000
--- a/mdk-stage1/dietlibc/librpc/pmap_rmt.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/* @(#)pmap_rmt.c	2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)pmap_rmt.c 1.21 87/08/27 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * pmap_rmt.c
- * Client interface to pmap rpc service.
- * remote call and broadcast service
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/rpc.h>
-#include <rpc/pmap_prot.h>
-#include <rpc/pmap_clnt.h>
-#include <rpc/pmap_rmt.h>
-#include <sys/socket.h>
-#include <stdio.h>
-#include <errno.h>
-//#include <net/if.h>
-#include <sys/ioctl.h>
-#include <arpa/inet.h>
-#define MAX_BROADCAST_SIZE 1400
-#include <unistd.h>
-#include <string.h>
-
-extern int errno;
-static struct timeval timeout = { 3, 0 };
-
-
-/*
- * pmapper remote-call-service interface.
- * This routine is used to call the pmapper remote call service
- * which will look up a service program in the port maps, and then
- * remotely call that routine with the given parameters.  This allows
- * programs to do a lookup and call in one step.
-*/
-enum clnt_stat
-pmap_rmtcall(addr, prog, vers, proc, xdrargs, argsp, xdrres, resp, tout,
-			 port_ptr)
-struct sockaddr_in *addr;
-u_long prog, vers, proc;
-xdrproc_t xdrargs, xdrres;
-caddr_t argsp, resp;
-struct timeval tout;
-u_long *port_ptr;
-{
-	int socket = -1;
-	register CLIENT *client;
-	struct rmtcallargs a;
-	struct rmtcallres r;
-	enum clnt_stat stat;
-
-	addr->sin_port = htons(PMAPPORT);
-	client = clntudp_create(addr, PMAPPROG, PMAPVERS, timeout, &socket);
-	if (client != (CLIENT *) NULL) {
-		a.prog = prog;
-		a.vers = vers;
-		a.proc = proc;
-		a.args_ptr = argsp;
-		a.xdr_args = xdrargs;
-		r.port_ptr = port_ptr;
-		r.results_ptr = resp;
-		r.xdr_results = xdrres;
-		stat = CLNT_CALL(client, PMAPPROC_CALLIT, (xdrproc_t)xdr_rmtcall_args, (caddr_t)&a,
-						 (xdrproc_t)xdr_rmtcallres, (caddr_t)&r, tout);
-		CLNT_DESTROY(client);
-	} else {
-		stat = RPC_FAILED;
-	}
-	(void) close(socket);
-	addr->sin_port = 0;
-	return (stat);
-}
-
-
-/*
- * XDR remote call arguments
- * written for XDR_ENCODE direction only
- */
-bool_t xdr_rmtcall_args(XDR* xdrs, struct rmtcallargs* cap)
-{
-	u_int lenposition, argposition, position;
-
-	if (xdr_u_long(xdrs, &(cap->prog)) &&
-		xdr_u_long(xdrs, &(cap->vers)) && xdr_u_long(xdrs, &(cap->proc))) {
-		lenposition = XDR_GETPOS(xdrs);
-		if (!xdr_u_long(xdrs, &(cap->arglen)))
-			return (FALSE);
-		argposition = XDR_GETPOS(xdrs);
-		if (!(*(cap->xdr_args)) (xdrs, cap->args_ptr))
-			return (FALSE);
-		position = XDR_GETPOS(xdrs);
-		cap->arglen = (u_long) position - (u_long) argposition;
-		XDR_SETPOS(xdrs, lenposition);
-		if (!xdr_u_long(xdrs, &(cap->arglen)))
-			return (FALSE);
-		XDR_SETPOS(xdrs, position);
-		return (TRUE);
-	}
-	return (FALSE);
-}
-
-/*
- * XDR remote call results
- * written for XDR_DECODE direction only
- */
-bool_t xdr_rmtcallres(XDR* xdrs, struct rmtcallres* crp)
-{
-	caddr_t port_ptr;
-
-	port_ptr = (caddr_t) crp->port_ptr;
-	if (xdr_reference(xdrs, &port_ptr, sizeof(u_long),
-					  (xdrproc_t)xdr_u_long) && xdr_u_long(xdrs, &crp->resultslen)) {
-		crp->port_ptr = (u_long *) port_ptr;
-		return ((*(crp->xdr_results)) (xdrs, crp->results_ptr));
-	}
-	return (FALSE);
-}
-
-
-/*
- * The following is kludged-up support for simple rpc broadcasts.
- * Someday a large, complicated system will replace these trivial 
- * routines which only support udp/ip .
- */
-
-static int getbroadcastnets(addrs, sock, buf)
-struct in_addr *addrs;
-int sock;						/* any valid socket will do */
-char *buf;						/* why allocxate more when we can use existing... */
-{
-#ifdef __linux__
-	struct sockaddr_in addr;
-
-	get_myaddress(&addr);
-#if 1
-	printf("%s(%d): no inet_makeaddr()\n", __FILE__, __LINE__);
-#else
-	addrs[0] = inet_makeaddr(inet_netof(addr.sin_addr), INADDR_ANY);
-#endif
-	return 1;
-#else
-	struct ifconf ifc;
-	struct ifreq ifreq, *ifr;
-	struct sockaddr_in *sin;
-	int n, i;
-
-	ifc.ifc_len = UDPMSGSIZE;
-	ifc.ifc_buf = buf;
-	if (ioctl(sock, SIOCGIFCONF, (char *) &ifc) < 0) {
-		perror("broadcast: ioctl (get interface configuration)");
-		return (0);
-	}
-	ifr = ifc.ifc_req;
-	for (i = 0, n = ifc.ifc_len / sizeof(struct ifreq); n > 0; n--, ifr++) {
-		ifreq = *ifr;
-		if (ioctl(sock, SIOCGIFFLAGS, (char *) &ifreq) < 0) {
-			perror("broadcast: ioctl (get interface flags)");
-			continue;
-		}
-		if ((ifreq.ifr_flags & IFF_BROADCAST) &&
-			(ifreq.ifr_flags & IFF_UP) &&
-			ifr->ifr_addr.sa_family == AF_INET) {
-			sin = (struct sockaddr_in *) &ifr->ifr_addr;
-#ifdef SIOCGIFBRDADDR			/* 4.3BSD */
-			if (ioctl(sock, SIOCGIFBRDADDR, (char *) &ifreq) < 0) {
-#if 1
-				printf("%s(%d): no inet_makeaddr()\n", __FILE__, __LINE__);
-#else
-				addrs[i++] = inet_makeaddr(inet_netof
-										   (sin->sin_addr.s_addr),
-										   INADDR_ANY);
-#endif
-			} else {
-				addrs[i++] = ((struct sockaddr_in *)
-							  &ifreq.ifr_addr)->sin_addr;
-			}
-#else							/* 4.2 BSD */
-#if 1
-			printf("%s(%d): no inet_makeaddr()\n", __FILE__, __LINE__);
-#else
-			addrs[i++] = inet_makeaddr(inet_netof
-									   (sin->sin_addr.s_addr), INADDR_ANY);
-#endif
-#endif
-		}
-	}
-	return (i);
-#endif
-}
-
-enum clnt_stat
-clnt_broadcast(prog, vers, proc, xargs, argsp, xresults, resultsp,
-			   eachresult)
-u_long prog;					/* program number */
-u_long vers;					/* version number */
-u_long proc;					/* procedure number */
-xdrproc_t xargs;				/* xdr routine for args */
-caddr_t argsp;					/* pointer to args */
-xdrproc_t xresults;				/* xdr routine for results */
-caddr_t resultsp;				/* pointer to results */
-resultproc_t eachresult;		/* call with each result obtained */
-{
-	enum clnt_stat stat;
-	AUTH *unix_auth = authunix_create_default();
-	XDR xdr_stream;
-	register XDR *xdrs = &xdr_stream;
-	int outlen, inlen, fromlen, nets;
-	register int sock;
-	int on = 1;
-
-#ifdef FD_SETSIZE
-	fd_set mask;
-	fd_set readfds;
-#else
-	int readfds;
-	register int mask;
-#endif							/* def FD_SETSIZE */
-	register int i;
-	bool_t done = FALSE;
-	register u_long xid;
-	u_long port;
-	struct in_addr addrs[20];
-	struct sockaddr_in baddr, raddr;	/* broadcast and response addresses */
-	struct rmtcallargs a;
-	struct rmtcallres r;
-	struct rpc_msg msg;
-	struct timeval t;
-	char outbuf[MAX_BROADCAST_SIZE], inbuf[UDPMSGSIZE];
-
-	/*
-	 * initialization: create a socket, a broadcast address, and
-	 * preserialize the arguments into a send buffer.
-	 */
-	if ((sock = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP)) < 0) {
-		perror("Cannot create socket for broadcast rpc");
-		stat = RPC_CANTSEND;
-		goto done_broad;
-	}
-#ifdef SO_BROADCAST
-	if (setsockopt(sock, SOL_SOCKET, SO_BROADCAST, &on, sizeof(on)) < 0) {
-		perror("Cannot set socket option SO_BROADCAST");
-		stat = RPC_CANTSEND;
-		goto done_broad;
-	}
-#endif							/* def SO_BROADCAST */
-#ifdef FD_SETSIZE
-	FD_ZERO(&mask);
-	FD_SET(sock, &mask);
-#else
-	mask = (1 << sock);
-#endif							/* def FD_SETSIZE */
-	nets = getbroadcastnets(addrs, sock, inbuf);
-	bzero((char *) &baddr, sizeof(baddr));
-	baddr.sin_family = AF_INET;
-	baddr.sin_port = htons(PMAPPORT);
-	baddr.sin_addr.s_addr = htonl(INADDR_ANY);
-/*	baddr.sin_addr.S_un.S_addr = htonl(INADDR_ANY); */
-	(void) gettimeofday(&t, (struct timezone *) 0);
-	msg.rm_xid = xid = getpid() ^ t.tv_sec ^ t.tv_usec;
-	t.tv_usec = 0;
-	msg.rm_direction = CALL;
-	msg.rm_call.cb_rpcvers = RPC_MSG_VERSION;
-	msg.rm_call.cb_prog = PMAPPROG;
-	msg.rm_call.cb_vers = PMAPVERS;
-	msg.rm_call.cb_proc = PMAPPROC_CALLIT;
-	msg.rm_call.cb_cred = unix_auth->ah_cred;
-	msg.rm_call.cb_verf = unix_auth->ah_verf;
-	a.prog = prog;
-	a.vers = vers;
-	a.proc = proc;
-	a.xdr_args = xargs;
-	a.args_ptr = argsp;
-	r.port_ptr = &port;
-	r.xdr_results = xresults;
-	r.results_ptr = resultsp;
-	xdrmem_create(xdrs, outbuf, MAX_BROADCAST_SIZE, XDR_ENCODE);
-	if ((!xdr_callmsg(xdrs, &msg)) || (!xdr_rmtcall_args(xdrs, &a))) {
-		stat = RPC_CANTENCODEARGS;
-		goto done_broad;
-	}
-	outlen = (int) xdr_getpos(xdrs);
-	xdr_destroy(xdrs);
-	/*
-	 * Basic loop: broadcast a packet and wait a while for response(s).
-	 * The response timeout grows larger per iteration.
-	 */
-	for (t.tv_sec = 4; t.tv_sec <= 14; t.tv_sec += 2) {
-		for (i = 0; i < nets; i++) {
-			baddr.sin_addr = addrs[i];
-			if (sendto(sock, outbuf, outlen, 0,
-					   (struct sockaddr *) &baddr,
-					   sizeof(struct sockaddr)) != outlen) {
-				perror("Cannot send broadcast packet");
-				stat = RPC_CANTSEND;
-				goto done_broad;
-			}
-		}
-		if (eachresult == NULL) {
-			stat = RPC_SUCCESS;
-			goto done_broad;
-		}
-	  recv_again:
-		msg.acpted_rply.ar_verf = _null_auth;
-		msg.acpted_rply.ar_results.where = (caddr_t) & r;
-		msg.acpted_rply.ar_results.proc = (xdrproc_t)xdr_rmtcallres;
-		readfds = mask;
-		switch (select(_rpc_dtablesize(), &readfds, 0, 0, &t)) {
-
-		case 0:				/* timed out */
-			stat = RPC_TIMEDOUT;
-			continue;
-
-		case -1:				/* some kind of error */
-			if (errno == EINTR)
-				goto recv_again;
-			perror("Broadcast select problem");
-			stat = RPC_CANTRECV;
-			goto done_broad;
-
-		}						/* end of select results switch */
-	  try_again:
-		fromlen = sizeof(struct sockaddr);
-
-		inlen = recvfrom(sock, inbuf, UDPMSGSIZE, 0,
-						 (struct sockaddr *) &raddr, &fromlen);
-		if (inlen < 0) {
-			if (errno == EINTR)
-				goto try_again;
-			perror("Cannot receive reply to broadcast");
-			stat = RPC_CANTRECV;
-			goto done_broad;
-		}
-		if (inlen < sizeof(u_long))
-			goto recv_again;
-		/*
-		 * see if reply transaction id matches sent id.
-		 * If so, decode the results.
-		 */
-		xdrmem_create(xdrs, inbuf, (u_int) inlen, XDR_DECODE);
-		if (xdr_replymsg(xdrs, &msg)) {
-			if ((msg.rm_xid == xid) &&
-				(msg.rm_reply.rp_stat == MSG_ACCEPTED) &&
-				(msg.acpted_rply.ar_stat == SUCCESS)) {
-				raddr.sin_port = htons((u_short) port);
-				done = (*eachresult) (resultsp, &raddr);
-			}
-			/* otherwise, we just ignore the errors ... */
-		} else {
-#ifdef notdef
-			/* some kind of deserialization problem ... */
-			if (msg.rm_xid == xid)
-				fprintf(stderr, "Broadcast deserialization problem");
-			/* otherwise, just random garbage */
-#endif
-		}
-		xdrs->x_op = XDR_FREE;
-		msg.acpted_rply.ar_results.proc = (xdrproc_t)xdr_void;
-		(void) xdr_replymsg(xdrs, &msg);
-		(void) (*xresults) (xdrs, resultsp);
-		xdr_destroy(xdrs);
-		if (done) {
-			stat = RPC_SUCCESS;
-			goto done_broad;
-		} else {
-			goto recv_again;
-		}
-	}
-  done_broad:
-	(void) close(sock);
-	AUTH_DESTROY(unix_auth);
-	return (stat);
-}
diff --git a/mdk-stage1/dietlibc/librpc/rpc_callmsg.c b/mdk-stage1/dietlibc/librpc/rpc_callmsg.c
deleted file mode 100644
index 4b3a9880e..000000000
--- a/mdk-stage1/dietlibc/librpc/rpc_callmsg.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/* @(#)rpc_callmsg.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)rpc_callmsg.c 1.4 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * rpc_callmsg.c
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- */
-
-#include <sys/param.h>
-
-#include <rpc/rpc.h>
-#include <string.h>
-
-/*
- * XDR a call message
- */
-bool_t xdr_callmsg(xdrs, cmsg)
-register XDR *xdrs;
-register struct rpc_msg *cmsg;
-{
-	register int32_t *buf;
-	register struct opaque_auth *oa;
-
-	if (xdrs->x_op == XDR_ENCODE) {
-		if (cmsg->rm_call.cb_cred.oa_length > MAX_AUTH_BYTES) {
-			return (FALSE);
-		}
-		if (cmsg->rm_call.cb_verf.oa_length > MAX_AUTH_BYTES) {
-			return (FALSE);
-		}
-		buf = XDR_INLINE(xdrs, 8 * BYTES_PER_XDR_UNIT
-						 + RNDUP(cmsg->rm_call.cb_cred.oa_length)
-						 + 2 * BYTES_PER_XDR_UNIT
-						 + RNDUP(cmsg->rm_call.cb_verf.oa_length));
-		if (buf != NULL) {
-			IXDR_PUT_LONG(buf, cmsg->rm_xid);
-			IXDR_PUT_ENUM(buf, cmsg->rm_direction);
-			if (cmsg->rm_direction != CALL) {
-				return (FALSE);
-			}
-			IXDR_PUT_LONG(buf, cmsg->rm_call.cb_rpcvers);
-			if (cmsg->rm_call.cb_rpcvers != RPC_MSG_VERSION) {
-				return (FALSE);
-			}
-			IXDR_PUT_LONG(buf, cmsg->rm_call.cb_prog);
-			IXDR_PUT_LONG(buf, cmsg->rm_call.cb_vers);
-			IXDR_PUT_LONG(buf, cmsg->rm_call.cb_proc);
-			oa = &cmsg->rm_call.cb_cred;
-			IXDR_PUT_ENUM(buf, oa->oa_flavor);
-			IXDR_PUT_LONG(buf, oa->oa_length);
-			if (oa->oa_length) {
-				bcopy(oa->oa_base, (caddr_t) buf, oa->oa_length);
-				buf += RNDUP(oa->oa_length) / sizeof(long);
-			}
-			oa = &cmsg->rm_call.cb_verf;
-			IXDR_PUT_ENUM(buf, oa->oa_flavor);
-			IXDR_PUT_LONG(buf, oa->oa_length);
-			if (oa->oa_length) {
-				bcopy(oa->oa_base, (caddr_t) buf, oa->oa_length);
-				/* no real need....
-				   buf += RNDUP(oa->oa_length) / sizeof (long);
-				 */
-			}
-			return (TRUE);
-		}
-	}
-	if (xdrs->x_op == XDR_DECODE) {
-		buf = XDR_INLINE(xdrs, 8 * BYTES_PER_XDR_UNIT);
-		if (buf != NULL) {
-			cmsg->rm_xid = IXDR_GET_LONG(buf);
-			cmsg->rm_direction = IXDR_GET_ENUM(buf, enum msg_type);
-
-			if (cmsg->rm_direction != CALL) {
-				return (FALSE);
-			}
-			cmsg->rm_call.cb_rpcvers = IXDR_GET_LONG(buf);
-			if (cmsg->rm_call.cb_rpcvers != RPC_MSG_VERSION) {
-				return (FALSE);
-			}
-			cmsg->rm_call.cb_prog = IXDR_GET_LONG(buf);
-			cmsg->rm_call.cb_vers = IXDR_GET_LONG(buf);
-			cmsg->rm_call.cb_proc = IXDR_GET_LONG(buf);
-			oa = &cmsg->rm_call.cb_cred;
-			oa->oa_flavor = IXDR_GET_ENUM(buf, enum_t);
-			oa->oa_length = IXDR_GET_LONG(buf);
-			if (oa->oa_length) {
-				if (oa->oa_length > MAX_AUTH_BYTES) {
-					return (FALSE);
-				}
-				if (oa->oa_base == NULL) {
-					oa->oa_base = (caddr_t)
-						mem_alloc(oa->oa_length);
-				}
-				buf = XDR_INLINE(xdrs, RNDUP(oa->oa_length));
-				if (buf == NULL) {
-					if (xdr_opaque(xdrs, oa->oa_base,
-								   oa->oa_length) == FALSE) {
-						return (FALSE);
-					}
-				} else {
-					bcopy((caddr_t) buf, oa->oa_base, oa->oa_length);
-					/* no real need....
-					   buf += RNDUP(oa->oa_length) /
-					   sizeof (long);
-					 */
-				}
-			}
-			oa = &cmsg->rm_call.cb_verf;
-			buf = XDR_INLINE(xdrs, 2 * BYTES_PER_XDR_UNIT);
-			if (buf == NULL) {
-				if (xdr_enum(xdrs, &oa->oa_flavor) == FALSE ||
-					xdr_u_int(xdrs, &oa->oa_length) == FALSE) {
-					return (FALSE);
-				}
-			} else {
-				oa->oa_flavor = IXDR_GET_ENUM(buf, enum_t);
-				oa->oa_length = IXDR_GET_LONG(buf);
-			}
-			if (oa->oa_length) {
-				if (oa->oa_length > MAX_AUTH_BYTES) {
-					return (FALSE);
-				}
-				if (oa->oa_base == NULL) {
-					oa->oa_base = (caddr_t)
-						mem_alloc(oa->oa_length);
-				}
-				buf = XDR_INLINE(xdrs, RNDUP(oa->oa_length));
-				if (buf == NULL) {
-					if (xdr_opaque(xdrs, oa->oa_base,
-								   oa->oa_length) == FALSE) {
-						return (FALSE);
-					}
-				} else {
-					bcopy((caddr_t) buf, oa->oa_base, oa->oa_length);
-					/* no real need...
-					   buf += RNDUP(oa->oa_length) /
-					   sizeof (long);
-					 */
-				}
-			}
-			return (TRUE);
-		}
-	}
-	if (xdr_u_long(xdrs, &(cmsg->rm_xid)) &&
-		xdr_enum(xdrs, (enum_t *) & (cmsg->rm_direction)) &&
-		(cmsg->rm_direction == CALL) &&
-		xdr_u_long(xdrs, &(cmsg->rm_call.cb_rpcvers)) &&
-		(cmsg->rm_call.cb_rpcvers == RPC_MSG_VERSION) &&
-		xdr_u_long(xdrs, &(cmsg->rm_call.cb_prog)) &&
-		xdr_u_long(xdrs, &(cmsg->rm_call.cb_vers)) &&
-		xdr_u_long(xdrs, &(cmsg->rm_call.cb_proc)) &&
-		xdr_opaque_auth(xdrs, &(cmsg->rm_call.cb_cred)))
-			return (xdr_opaque_auth(xdrs, &(cmsg->rm_call.cb_verf)));
-	return (FALSE);
-}
diff --git a/mdk-stage1/dietlibc/librpc/rpc_commondata.c b/mdk-stage1/dietlibc/librpc/rpc_commondata.c
deleted file mode 100644
index 39648d284..000000000
--- a/mdk-stage1/dietlibc/librpc/rpc_commondata.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* @(#)rpc_commondata.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#include <rpc/rpc.h>
-/*
- * This file should only contain common data (global data) that is exported
- * by public interfaces 
- */
-struct opaque_auth _null_auth;
-
-#ifdef FD_SETSIZE
-fd_set svc_fdset;
-#else
-int svc_fds;
-#endif							/* def FD_SETSIZE */
-struct rpc_createerr rpc_createerr;
diff --git a/mdk-stage1/dietlibc/librpc/rpc_dtablesize.c b/mdk-stage1/dietlibc/librpc/rpc_dtablesize.c
deleted file mode 100644
index b08ebaccd..000000000
--- a/mdk-stage1/dietlibc/librpc/rpc_dtablesize.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/* @(#)rpc_dtablesize.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)rpc_dtablesize.c 1.2 87/08/11 Copyr 1987 Sun Micro";
-#endif
-
-#include <unistd.h>
-
-/*
- * Cache the result of getdtablesize(), so we don't have to do an
- * expensive system call every time.
- */
-int _rpc_dtablesize()
-{
-	static int size;
-
-	if (size == 0) {
-		size = getdtablesize();
-	}
-	return (size);
-}
diff --git a/mdk-stage1/dietlibc/librpc/rpc_prot.c b/mdk-stage1/dietlibc/librpc/rpc_prot.c
deleted file mode 100644
index 19a4db27f..000000000
--- a/mdk-stage1/dietlibc/librpc/rpc_prot.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/* @(#)rpc_prot.c	2.3 88/08/07 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)rpc_prot.c 1.36 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * rpc_prot.c
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * This set of routines implements the rpc message definition,
- * its serializer and some common rpc utility routines.
- * The routines are meant for various implementations of rpc -
- * they are NOT for the rpc client or rpc service implementations!
- * Because authentication stuff is easy and is part of rpc, the opaque
- * routines are also in this program.
- */
-
-#include <sys/param.h>
-
-#include <rpc/rpc.h>
-
-/* * * * * * * * * * * * * * XDR Authentication * * * * * * * * * * * */
-
-struct opaque_auth _null_auth;
-
-/*
- * XDR an opaque authentication struct
- * (see auth.h)
- */
-bool_t xdr_opaque_auth(xdrs, ap)
-register XDR *xdrs;
-register struct opaque_auth *ap;
-{
-
-	if (xdr_enum(xdrs, &(ap->oa_flavor)))
-		return (xdr_bytes(xdrs, &ap->oa_base,
-						  &ap->oa_length, MAX_AUTH_BYTES));
-	return (FALSE);
-}
-
-/*
- * XDR a DES block
- */
-bool_t xdr_des_block(xdrs, blkp)
-register XDR *xdrs;
-register des_block *blkp;
-{
-	return (xdr_opaque(xdrs, (caddr_t) blkp, sizeof(des_block)));
-}
-
-/* * * * * * * * * * * * * * XDR RPC MESSAGE * * * * * * * * * * * * * * * */
-
-/*
- * XDR the MSG_ACCEPTED part of a reply message union
- */
-bool_t xdr_accepted_reply(xdrs, ar)
-register XDR *xdrs;
-register struct accepted_reply *ar;
-{
-
-	/* personalized union, rather than calling xdr_union */
-	if (!xdr_opaque_auth(xdrs, &(ar->ar_verf)))
-		return (FALSE);
-	if (!xdr_enum(xdrs, (enum_t *) & (ar->ar_stat)))
-		return (FALSE);
-	switch (ar->ar_stat) {
-
-	case SUCCESS:
-		return ((*(ar->ar_results.proc)) (xdrs, ar->ar_results.where));
-
-	case PROG_MISMATCH:
-		if (!xdr_u_long(xdrs, &(ar->ar_vers.low)))
-			return (FALSE);
-		return (xdr_u_long(xdrs, &(ar->ar_vers.high)));
-	}
-	return (TRUE);				/* TRUE => open ended set of problems */
-}
-
-/*
- * XDR the MSG_DENIED part of a reply message union
- */
-bool_t xdr_rejected_reply(xdrs, rr)
-register XDR *xdrs;
-register struct rejected_reply *rr;
-{
-
-	/* personalized union, rather than calling xdr_union */
-	if (!xdr_enum(xdrs, (enum_t *) & (rr->rj_stat)))
-		return (FALSE);
-	switch (rr->rj_stat) {
-
-	case RPC_MISMATCH:
-		if (!xdr_u_long(xdrs, &(rr->rj_vers.low)))
-			return (FALSE);
-		return (xdr_u_long(xdrs, &(rr->rj_vers.high)));
-
-	case AUTH_ERROR:
-		return (xdr_enum(xdrs, (enum_t *) & (rr->rj_why)));
-	}
-	return (FALSE);
-}
-
-static struct xdr_discrim reply_dscrm[3] = {
-	{(int) MSG_ACCEPTED, (xdrproc_t)xdr_accepted_reply},
-	{(int) MSG_DENIED, (xdrproc_t)xdr_rejected_reply},
-	{__dontcare__, NULL_xdrproc_t}
-};
-
-/*
- * XDR a reply message
- */
-bool_t xdr_replymsg(xdrs, rmsg)
-register XDR *xdrs;
-register struct rpc_msg *rmsg;
-{
-	if (xdr_u_long(xdrs, &(rmsg->rm_xid)) &&
-		xdr_enum(xdrs, (enum_t *) & (rmsg->rm_direction)) &&
-		(rmsg->rm_direction == REPLY))
-		return (xdr_union(xdrs, (enum_t *) & (rmsg->rm_reply.rp_stat),
-						  (caddr_t) & (rmsg->rm_reply.ru), reply_dscrm,
-						  NULL_xdrproc_t));
-	return (FALSE);
-}
-
-
-/*
- * Serializes the "static part" of a call message header.
- * The fields include: rm_xid, rm_direction, rpcvers, prog, and vers.
- * The rm_xid is not really static, but the user can easily munge on the fly.
- */
-bool_t xdr_callhdr(xdrs, cmsg)
-register XDR *xdrs;
-register struct rpc_msg *cmsg;
-{
-
-	cmsg->rm_direction = CALL;
-	cmsg->rm_call.cb_rpcvers = RPC_MSG_VERSION;
-	if (
-		(xdrs->x_op == XDR_ENCODE) &&
-		xdr_u_long(xdrs, &(cmsg->rm_xid)) &&
-		xdr_enum(xdrs, (enum_t *) & (cmsg->rm_direction)) &&
-		xdr_u_long(xdrs, &(cmsg->rm_call.cb_rpcvers)) &&
-		xdr_u_long(xdrs, &(cmsg->rm_call.cb_prog)))
-			return (xdr_u_long(xdrs, &(cmsg->rm_call.cb_vers)));
-	return (FALSE);
-}
-
-/* ************************** Client utility routine ************* */
-
-static void accepted(acpt_stat, error)
-register enum accept_stat acpt_stat;
-register struct rpc_err *error;
-{
-
-	switch (acpt_stat) {
-
-	case PROG_UNAVAIL:
-		error->re_status = RPC_PROGUNAVAIL;
-		return;
-
-	case PROG_MISMATCH:
-		error->re_status = RPC_PROGVERSMISMATCH;
-		return;
-
-	case PROC_UNAVAIL:
-		error->re_status = RPC_PROCUNAVAIL;
-		return;
-
-	case GARBAGE_ARGS:
-		error->re_status = RPC_CANTDECODEARGS;
-		return;
-
-	case SYSTEM_ERR:
-		error->re_status = RPC_SYSTEMERROR;
-		return;
-
-	case SUCCESS:
-		error->re_status = RPC_SUCCESS;
-		return;
-	}
-	/* something's wrong, but we don't know what ... */
-	error->re_status = RPC_FAILED;
-	error->re_lb.s1 = (long) MSG_ACCEPTED;
-	error->re_lb.s2 = (long) acpt_stat;
-}
-
-static void rejected(rjct_stat, error)
-register enum reject_stat rjct_stat;
-register struct rpc_err *error;
-{
-
-	switch (rjct_stat) {
-
-	case RPC_VERSMISMATCH:
-		error->re_status = RPC_VERSMISMATCH;
-		return;
-
-	case AUTH_ERROR:
-		error->re_status = RPC_AUTHERROR;
-		return;
-	}
-	/* something's wrong, but we don't know what ... */
-	error->re_status = RPC_FAILED;
-	error->re_lb.s1 = (long) MSG_DENIED;
-	error->re_lb.s2 = (long) rjct_stat;
-}
-
-/*
- * given a reply message, fills in the error
- */
-void _seterr_reply(msg, error)
-register struct rpc_msg *msg;
-register struct rpc_err *error;
-{
-
-	/* optimized for normal, SUCCESSful case */
-	switch (msg->rm_reply.rp_stat) {
-
-	case MSG_ACCEPTED:
-		if (msg->acpted_rply.ar_stat == SUCCESS) {
-			error->re_status = RPC_SUCCESS;
-			return;
-		};
-		accepted(msg->acpted_rply.ar_stat, error);
-		break;
-
-	case MSG_DENIED:
-		rejected(msg->rjcted_rply.rj_stat, error);
-		break;
-
-	default:
-		error->re_status = RPC_FAILED;
-		error->re_lb.s1 = (long) (msg->rm_reply.rp_stat);
-		break;
-	}
-	switch (error->re_status) {
-
-	case RPC_VERSMISMATCH:
-		error->re_vers.low = msg->rjcted_rply.rj_vers.low;
-		error->re_vers.high = msg->rjcted_rply.rj_vers.high;
-		break;
-
-	case RPC_AUTHERROR:
-		error->re_why = msg->rjcted_rply.rj_why;
-		break;
-
-	case RPC_PROGVERSMISMATCH:
-		error->re_vers.low = msg->acpted_rply.ar_vers.low;
-		error->re_vers.high = msg->acpted_rply.ar_vers.high;
-		break;
-	}
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc.c b/mdk-stage1/dietlibc/librpc/svc.c
deleted file mode 100644
index 4fcdb5216..000000000
--- a/mdk-stage1/dietlibc/librpc/svc.c
+++ /dev/null
@@ -1,479 +0,0 @@
-/* @(#)svc.c	2.4 88/08/11 4.0 RPCSRC; from 1.44 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)svc.c 1.41 87/10/13 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * svc.c, Server-side remote procedure call interface.
- *
- * There are two sets of procedures here.  The xprt routines are
- * for handling transport handles.  The svc routines handle the
- * list of service routines.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <errno.h>
-#include <rpc/rpc.h>
-#include <rpc/pmap_clnt.h>
-#ifdef __linux__
-#include <sys/types.h>
-#endif
-
-extern int errno;
-
-#ifdef FD_SETSIZE
-static SVCXPRT **xports;
-#else
-#define NOFILE 32
-
-static SVCXPRT *xports[NOFILE];
-#endif							/* def FD_SETSIZE */
-
-#define NULL_SVC ((struct svc_callout *)0)
-#define	RQCRED_SIZE	400			/* this size is excessive */
-
-/*
- * The services list
- * Each entry represents a set of procedures (an rpc program).
- * The dispatch routine takes request structs and runs the
- * apropriate procedure.
- */
-static struct svc_callout {
-	struct svc_callout *sc_next;
-	u_long sc_prog;
-	u_long sc_vers;
-	void (*sc_dispatch) ();
-} *svc_head;
-
-static struct svc_callout *svc_find();
-
-/* ***************  SVCXPRT related stuff **************** */
-
-/*
- * Activate a transport handle.
- */
-void xprt_register(xprt)
-SVCXPRT *xprt;
-{
-	register int sock = xprt->xp_sock;
-
-#ifdef FD_SETSIZE
-	if (xports == NULL) {
-		xports = (SVCXPRT **)
-			mem_alloc(FD_SETSIZE * sizeof(SVCXPRT *));
-	}
-	if (sock < _rpc_dtablesize()) {
-		xports[sock] = xprt;
-		FD_SET(sock, &svc_fdset);
-	}
-#else
-	if (sock < NOFILE) {
-		xports[sock] = xprt;
-		svc_fds |= (1 << sock);
-	}
-#endif							/* def FD_SETSIZE */
-
-}
-
-/*
- * De-activate a transport handle. 
- */
-void xprt_unregister(xprt)
-SVCXPRT *xprt;
-{
-	register int sock = xprt->xp_sock;
-
-#ifdef FD_SETSIZE
-	if ((sock < _rpc_dtablesize()) && (xports[sock] == xprt)) {
-		xports[sock] = (SVCXPRT *) 0;
-		FD_CLR(sock, &svc_fdset);
-	}
-#else
-	if ((sock < NOFILE) && (xports[sock] == xprt)) {
-		xports[sock] = (SVCXPRT *) 0;
-		svc_fds &= ~(1 << sock);
-	}
-#endif							/* def FD_SETSIZE */
-}
-
-
-/* ********************** CALLOUT list related stuff ************* */
-
-/*
- * Add a service program to the callout list.
- * The dispatch routine will be called when a rpc request for this
- * program number comes in.
- */
-bool_t svc_register(xprt, prog, vers, dispatch, protocol)
-SVCXPRT *xprt;
-u_long prog;
-u_long vers;
-void (*dispatch) ();
-rpcprot_t protocol;
-{
-	struct svc_callout *prev;
-	register struct svc_callout *s;
-
-	if ((s = svc_find(prog, vers, &prev)) != NULL_SVC) {
-		if (s->sc_dispatch == dispatch)
-			goto pmap_it;		/* he is registering another xptr */
-		return (FALSE);
-	}
-	s = (struct svc_callout *) mem_alloc(sizeof(struct svc_callout));
-
-	if (s == (struct svc_callout *) 0) {
-		return (FALSE);
-	}
-	s->sc_prog = prog;
-	s->sc_vers = vers;
-	s->sc_dispatch = dispatch;
-	s->sc_next = svc_head;
-	svc_head = s;
-  pmap_it:
-	/* now register the information with the local binder service */
-	if (protocol) {
-		return (pmap_set(prog, vers, protocol, xprt->xp_port));
-	}
-	return (TRUE);
-}
-
-/*
- * Remove a service program from the callout list.
- */
-void svc_unregister(prog, vers)
-u_long prog;
-u_long vers;
-{
-	struct svc_callout *prev;
-	register struct svc_callout *s;
-
-	if ((s = svc_find(prog, vers, &prev)) == NULL_SVC)
-		return;
-	if (prev == NULL_SVC) {
-		svc_head = s->sc_next;
-	} else {
-		prev->sc_next = s->sc_next;
-	}
-	s->sc_next = NULL_SVC;
-	mem_free((char *) s, (u_int) sizeof(struct svc_callout));
-
-	/* now unregister the information with the local binder service */
-	(void) pmap_unset(prog, vers);
-}
-
-/*
- * Search the callout list for a program number, return the callout
- * struct.
- */
-static struct svc_callout *svc_find(prog, vers, prev)
-u_long prog;
-u_long vers;
-struct svc_callout **prev;
-{
-	register struct svc_callout *s, *p;
-
-	p = NULL_SVC;
-	for (s = svc_head; s != NULL_SVC; s = s->sc_next) {
-		if ((s->sc_prog == prog) && (s->sc_vers == vers))
-			goto done;
-		p = s;
-	}
-  done:
-	*prev = p;
-	return (s);
-}
-
-/* ******************* REPLY GENERATION ROUTINES  ************ */
-
-/*
- * Send a reply to an rpc request
- */
-bool_t svc_sendreply(xprt, xdr_results, xdr_location)
-register SVCXPRT *xprt;
-xdrproc_t xdr_results;
-caddr_t xdr_location;
-{
-	struct rpc_msg rply;
-
-	rply.rm_direction = REPLY;
-	rply.rm_reply.rp_stat = MSG_ACCEPTED;
-	rply.acpted_rply.ar_verf = xprt->xp_verf;
-	rply.acpted_rply.ar_stat = SUCCESS;
-	rply.acpted_rply.ar_results.where = xdr_location;
-	rply.acpted_rply.ar_results.proc = xdr_results;
-	return (SVC_REPLY(xprt, &rply));
-}
-
-/*
- * No procedure error reply
- */
-void svcerr_noproc(xprt)
-register SVCXPRT *xprt;
-{
-	struct rpc_msg rply;
-
-	rply.rm_direction = REPLY;
-	rply.rm_reply.rp_stat = MSG_ACCEPTED;
-	rply.acpted_rply.ar_verf = xprt->xp_verf;
-	rply.acpted_rply.ar_stat = PROC_UNAVAIL;
-	SVC_REPLY(xprt, &rply);
-}
-
-/*
- * Can't decode args error reply
- */
-void svcerr_decode(xprt)
-register SVCXPRT *xprt;
-{
-	struct rpc_msg rply;
-
-	rply.rm_direction = REPLY;
-	rply.rm_reply.rp_stat = MSG_ACCEPTED;
-	rply.acpted_rply.ar_verf = xprt->xp_verf;
-	rply.acpted_rply.ar_stat = GARBAGE_ARGS;
-	SVC_REPLY(xprt, &rply);
-}
-
-/*
- * Some system error
- */
-void svcerr_systemerr(xprt)
-register SVCXPRT *xprt;
-{
-	struct rpc_msg rply;
-
-	rply.rm_direction = REPLY;
-	rply.rm_reply.rp_stat = MSG_ACCEPTED;
-	rply.acpted_rply.ar_verf = xprt->xp_verf;
-	rply.acpted_rply.ar_stat = SYSTEM_ERR;
-	SVC_REPLY(xprt, &rply);
-}
-
-/*
- * Authentication error reply
- */
-void svcerr_auth(xprt, why)
-SVCXPRT *xprt;
-enum auth_stat why;
-{
-	struct rpc_msg rply;
-
-	rply.rm_direction = REPLY;
-	rply.rm_reply.rp_stat = MSG_DENIED;
-	rply.rjcted_rply.rj_stat = AUTH_ERROR;
-	rply.rjcted_rply.rj_why = why;
-	SVC_REPLY(xprt, &rply);
-}
-
-/*
- * Auth too weak error reply
- */
-void svcerr_weakauth(xprt)
-SVCXPRT *xprt;
-{
-
-	svcerr_auth(xprt, AUTH_TOOWEAK);
-}
-
-/*
- * Program unavailable error reply
- */
-void svcerr_noprog(xprt)
-register SVCXPRT *xprt;
-{
-	struct rpc_msg rply;
-
-	rply.rm_direction = REPLY;
-	rply.rm_reply.rp_stat = MSG_ACCEPTED;
-	rply.acpted_rply.ar_verf = xprt->xp_verf;
-	rply.acpted_rply.ar_stat = PROG_UNAVAIL;
-	SVC_REPLY(xprt, &rply);
-}
-
-/*
- * Program version mismatch error reply
- */
-void svcerr_progvers(xprt, low_vers, high_vers)
-register SVCXPRT *xprt;
-u_long low_vers;
-u_long high_vers;
-{
-	struct rpc_msg rply;
-
-	rply.rm_direction = REPLY;
-	rply.rm_reply.rp_stat = MSG_ACCEPTED;
-	rply.acpted_rply.ar_verf = xprt->xp_verf;
-	rply.acpted_rply.ar_stat = PROG_MISMATCH;
-	rply.acpted_rply.ar_vers.low = low_vers;
-	rply.acpted_rply.ar_vers.high = high_vers;
-	SVC_REPLY(xprt, &rply);
-}
-
-/* ******************* SERVER INPUT STUFF ******************* */
-
-/*
- * Get server side input from some transport.
- *
- * Statement of authentication parameters management:
- * This function owns and manages all authentication parameters, specifically
- * the "raw" parameters (msg.rm_call.cb_cred and msg.rm_call.cb_verf) and
- * the "cooked" credentials (rqst->rq_clntcred).
- * However, this function does not know the structure of the cooked
- * credentials, so it make the following assumptions: 
- *   a) the structure is contiguous (no pointers), and
- *   b) the cred structure size does not exceed RQCRED_SIZE bytes. 
- * In all events, all three parameters are freed upon exit from this routine.
- * The storage is trivially management on the call stack in user land, but
- * is mallocated in kernel land.
- */
-
-void svc_getreq(rdfds)
-int rdfds;
-{
-#ifdef FD_SETSIZE
-	fd_set readfds;
-
-	FD_ZERO(&readfds);
-/*#ifdef __linux__*/
-#if 0
-	readfds = rdfds;
-#else
-	readfds.fds_bits[0] = rdfds;
-#endif
-	svc_getreqset(&readfds);
-#else
-	int readfds = rdfds & svc_fds;
-
-	svc_getreqset(&readfds);
-#endif							/* def FD_SETSIZE */
-}
-
-void svc_getreqset(readfds)
-#ifdef FD_SETSIZE
-fd_set *readfds;
-{
-#else
-int *readfds;
-{
-	int readfds_local = *readfds;
-#endif							/* def FD_SETSIZE */
-	enum xprt_stat stat;
-	struct rpc_msg msg;
-	int prog_found;
-	u_long low_vers;
-	u_long high_vers;
-	struct svc_req r;
-	register SVCXPRT *xprt;
-	register u_long mask;
-	register int bit;
-	register u_long *maskp;
-	register int setsize;
-	register int sock;
-	char cred_area[2 * MAX_AUTH_BYTES + RQCRED_SIZE];
-
-	msg.rm_call.cb_cred.oa_base = cred_area;
-	msg.rm_call.cb_verf.oa_base = &(cred_area[MAX_AUTH_BYTES]);
-	r.rq_clntcred = &(cred_area[2 * MAX_AUTH_BYTES]);
-
-
-#ifdef FD_SETSIZE
-	setsize = _rpc_dtablesize();
-#ifdef __linux__
-/*#define NFDBITS	32*/
-	maskp = (u_long *) readfds;
-#else
-	maskp = (u_long *) readfds->fds_bits;
-#endif
-	for (sock = 0; sock < setsize; sock += NFDBITS) {
-		for (mask = *maskp++; (bit = ffs(mask)); mask ^= (1 << (bit - 1))) {
-			/* sock has input waiting */
-			xprt = xports[sock + bit - 1];
-#else
-	for (sock = 0; readfds_local != 0; sock++, readfds_local >>= 1) {
-		if ((readfds_local & 1) != 0) {
-			/* sock has input waiting */
-			xprt = xports[sock];
-#endif							/* def FD_SETSIZE */
-			/* now receive msgs from xprtprt (support batch calls) */
-			do {
-				if (SVC_RECV(xprt, &msg)) {
-
-					/* now find the exported program and call it */
-					register struct svc_callout *s;
-					enum auth_stat why;
-
-					r.rq_xprt = xprt;
-					r.rq_prog = msg.rm_call.cb_prog;
-					r.rq_vers = msg.rm_call.cb_vers;
-					r.rq_proc = msg.rm_call.cb_proc;
-					r.rq_cred = msg.rm_call.cb_cred;
-					/* first authenticate the message */
-					if ((why = _authenticate(&r, &msg)) != AUTH_OK) {
-						svcerr_auth(xprt, why);
-						goto call_done;
-					}
-					/* now match message with a registered service */
-					prog_found = FALSE;
-					low_vers = 0 - 1;
-					high_vers = 0;
-					for (s = svc_head; s != NULL_SVC; s = s->sc_next) {
-						if (s->sc_prog == r.rq_prog) {
-							if (s->sc_vers == r.rq_vers) {
-								(*s->sc_dispatch) (&r, xprt);
-								goto call_done;
-							}	/* found correct version */
-							prog_found = TRUE;
-							if (s->sc_vers < low_vers)
-								low_vers = s->sc_vers;
-							if (s->sc_vers > high_vers)
-								high_vers = s->sc_vers;
-						}		/* found correct program */
-					}
-					/*
-					 * if we got here, the program or version
-					 * is not served ...
-					 */
-					if (prog_found)
-						svcerr_progvers(xprt, low_vers, high_vers);
-					else
-						svcerr_noprog(xprt);
-					/* Fall through to ... */
-				}
-			  call_done:
-				if ((stat = SVC_STAT(xprt)) == XPRT_DIED) {
-					SVC_DESTROY(xprt);
-					break;
-				}
-			} while (stat == XPRT_MOREREQS);
-		}
-	}
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc_auth.c b/mdk-stage1/dietlibc/librpc/svc_auth.c
deleted file mode 100644
index 336586d95..000000000
--- a/mdk-stage1/dietlibc/librpc/svc_auth.c
+++ /dev/null
@@ -1,115 +0,0 @@
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)svc_auth.c	2.1 88/08/07 4.0 RPCSRC; from 1.19 87/08/11 Copyr 1984 Sun Micro";
-#endif
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-/*
- * svc_auth_nodes.c, Server-side rpc authenticator interface,
- * *WITHOUT* DES authentication.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/rpc.h>
-
-/*
- * svcauthsw is the bdevsw of server side authentication. 
- * 
- * Server side authenticators are called from authenticate by
- * using the client auth struct flavor field to index into svcauthsw.
- * The server auth flavors must implement a routine that looks  
- * like: 
- * 
- *	enum auth_stat
- *	flavorx_auth(rqst, msg)
- *		register struct svc_req *rqst; 
- *		register struct rpc_msg *msg;
- *
- */
-
-enum auth_stat _svcauth_null();		/* no authentication */
-enum auth_stat _svcauth_unix();		/* unix style (uid, gids) */
-enum auth_stat _svcauth_short();	/* short hand unix style */
-
-static struct {
-	enum auth_stat (*authenticator) ();
-} svcauthsw[] = {
-	{ _svcauth_null },			/* AUTH_NULL */
-	{ _svcauth_unix },			/* AUTH_UNIX */
-	{ _svcauth_short },			/* AUTH_SHORT */
-};
-
-#define	AUTH_MAX	2			/* HIGHEST AUTH NUMBER */
-
-
-/*
- * The call rpc message, msg has been obtained from the wire.  The msg contains
- * the raw form of credentials and verifiers.  authenticate returns AUTH_OK
- * if the msg is successfully authenticated.  If AUTH_OK then the routine also
- * does the following things:
- * set rqst->rq_xprt->verf to the appropriate response verifier;
- * sets rqst->rq_client_cred to the "cooked" form of the credentials.
- *
- * NB: rqst->rq_cxprt->verf must be pre-alloctaed;
- * its length is set appropriately.
- *
- * The caller still owns and is responsible for msg->u.cmb.cred and
- * msg->u.cmb.verf.  The authentication system retains ownership of
- * rqst->rq_client_cred, the cooked credentials.
- *
- * There is an assumption that any flavour less than AUTH_NULL is
- * invalid.
- */
-enum auth_stat _authenticate(rqst, msg)
-register struct svc_req *rqst;
-struct rpc_msg *msg;
-{
-	register int cred_flavor;
-
-	rqst->rq_cred = msg->rm_call.cb_cred;
-	rqst->rq_xprt->xp_verf.oa_flavor = _null_auth.oa_flavor;
-	rqst->rq_xprt->xp_verf.oa_length = 0;
-	cred_flavor = rqst->rq_cred.oa_flavor;
-	if ((cred_flavor <= AUTH_MAX) && (cred_flavor >= AUTH_NULL)) {
-		return ((*(svcauthsw[cred_flavor].authenticator)) (rqst, msg));
-	}
-
-	return (AUTH_REJECTEDCRED);
-}
-
-enum auth_stat _svcauth_null( /*rqst, msg */ )
-	/*struct svc_req *rqst;
-	   struct rpc_msg *msg; */
-{
-
-	return (AUTH_OK);
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc_auth_unix.c b/mdk-stage1/dietlibc/librpc/svc_auth_unix.c
deleted file mode 100644
index 7e0305f0a..000000000
--- a/mdk-stage1/dietlibc/librpc/svc_auth_unix.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/* @(#)svc_auth_unix.c	2.3 88/08/01 4.0 RPCSRC; from 1.28 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)svc_auth_unix.c 1.28 88/02/08 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * svc_auth_unix.c
- * Handles UNIX flavor authentication parameters on the service side of rpc.
- * There are two svc auth implementations here: AUTH_UNIX and AUTH_SHORT.
- * _svcauth_unix does full blown unix style uid,gid+gids auth,
- * _svcauth_short uses a shorthand auth to index into a cache of longhand auths.
- * Note: the shorthand has been gutted for efficiency.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <stdio.h>
-#include <rpc/rpc.h>
-#include <string.h>
-
-/*
- * Unix longhand authenticator
- */
-enum auth_stat _svcauth_unix(rqst, msg)
-register struct svc_req *rqst;
-register struct rpc_msg *msg;
-{
-	register enum auth_stat stat;
-	XDR xdrs;
-	register struct authunix_parms *aup;
-	register int32_t *buf;
-	struct area {
-		struct authunix_parms area_aup;
-		char area_machname[MAX_MACHINE_NAME + 1];
-		gid_t area_gids[NGRPS];
-	} *area;
-	u_int auth_len;
-	int str_len, gid_len;
-	register int i;
-
-	area = (struct area *) rqst->rq_clntcred;
-	aup = &area->area_aup;
-	aup->aup_machname = area->area_machname;
-	aup->aup_gids = area->area_gids;
-	auth_len = (u_int) msg->rm_call.cb_cred.oa_length;
-	xdrmem_create(&xdrs, msg->rm_call.cb_cred.oa_base, auth_len,
-				  XDR_DECODE);
-	buf = XDR_INLINE(&xdrs, auth_len);
-	if (buf != NULL) {
-		aup->aup_time = IXDR_GET_LONG(buf);
-		str_len = IXDR_GET_U_LONG(buf);
-		if (str_len > MAX_MACHINE_NAME) {
-			stat = AUTH_BADCRED;
-			goto done;
-		}
-		bcopy((caddr_t) buf, aup->aup_machname, (u_int) str_len);
-		aup->aup_machname[str_len] = 0;
-		str_len = RNDUP(str_len);
-		buf += str_len / sizeof(long);
-
-		aup->aup_uid = IXDR_GET_LONG(buf);
-		aup->aup_gid = IXDR_GET_LONG(buf);
-		gid_len = IXDR_GET_U_LONG(buf);
-		if (gid_len > NGRPS) {
-			stat = AUTH_BADCRED;
-			goto done;
-		}
-		aup->aup_len = gid_len;
-		for (i = 0; i < gid_len; i++) {
-			aup->aup_gids[i] = IXDR_GET_LONG(buf);
-		}
-		/*
-		 * five is the smallest unix credentials structure -
-		 * timestamp, hostname len (0), uid, gid, and gids len (0).
-		 */
-		if ((5 + gid_len) * BYTES_PER_XDR_UNIT + str_len > auth_len) {
-			(void) printf("bad auth_len gid %d str %d auth %d\n",
-						  gid_len, str_len, auth_len);
-			stat = AUTH_BADCRED;
-			goto done;
-		}
-	} else if (!xdr_authunix_parms(&xdrs, aup)) {
-		xdrs.x_op = XDR_FREE;
-		(void) xdr_authunix_parms(&xdrs, aup);
-		stat = AUTH_BADCRED;
-		goto done;
-	}
-	rqst->rq_xprt->xp_verf.oa_flavor = AUTH_NULL;
-	rqst->rq_xprt->xp_verf.oa_length = 0;
-	stat = AUTH_OK;
-  done:
-	XDR_DESTROY(&xdrs);
-	return (stat);
-}
-
-
-/*
- * Shorthand unix authenticator
- * Looks up longhand in a cache.
- */
- /*ARGSUSED*/ enum auth_stat _svcauth_short(rqst, msg)
-struct svc_req *rqst;
-struct rpc_msg *msg;
-{
-	return (AUTH_REJECTEDCRED);
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc_raw.c b/mdk-stage1/dietlibc/librpc/svc_raw.c
deleted file mode 100644
index c13ea5e06..000000000
--- a/mdk-stage1/dietlibc/librpc/svc_raw.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/* @(#)svc_raw.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)svc_raw.c 1.15 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * svc_raw.c,   This a toy for simple testing and timing.
- * Interface to create an rpc client and server in the same UNIX process.
- * This lets us similate rpc and get rpc (round trip) overhead, without
- * any interference from the kernal.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/rpc.h>
-
-
-/*
- * This is the "network" that we will be moving data over
- */
-static struct svcraw_private {
-	char _raw_buf[UDPMSGSIZE];
-	SVCXPRT server;
-	XDR xdr_stream;
-	char verf_body[MAX_AUTH_BYTES];
-} *svcraw_private;
-
-static bool_t svcraw_recv();
-static enum xprt_stat svcraw_stat();
-static bool_t svcraw_getargs();
-static bool_t svcraw_reply();
-static bool_t svcraw_freeargs();
-static void svcraw_destroy();
-
-static struct xp_ops server_ops = {
-	svcraw_recv,
-	svcraw_stat,
-	svcraw_getargs,
-	svcraw_reply,
-	svcraw_freeargs,
-	svcraw_destroy
-};
-
-SVCXPRT *svcraw_create()
-{
-	register struct svcraw_private *srp = svcraw_private;
-
-	if (srp == 0) {
-		srp = (struct svcraw_private *) calloc(1, sizeof(*srp));
-		if (srp == 0)
-			return (0);
-	}
-	srp->server.xp_sock = 0;
-	srp->server.xp_port = 0;
-	srp->server.xp_ops = &server_ops;
-	srp->server.xp_verf.oa_base = srp->verf_body;
-	xdrmem_create(&srp->xdr_stream, srp->_raw_buf, UDPMSGSIZE, XDR_FREE);
-	return (&srp->server);
-}
-
-static enum xprt_stat svcraw_stat()
-{
-
-	return (XPRT_IDLE);
-}
-
-static bool_t svcraw_recv(xprt, msg)
-SVCXPRT *xprt;
-struct rpc_msg *msg;
-{
-	register struct svcraw_private *srp = svcraw_private;
-	register XDR *xdrs;
-
-	if (srp == 0)
-		return (0);
-	xdrs = &srp->xdr_stream;
-	xdrs->x_op = XDR_DECODE;
-	XDR_SETPOS(xdrs, 0);
-	if (!xdr_callmsg(xdrs, msg))
-		return (FALSE);
-	return (TRUE);
-}
-
-static bool_t svcraw_reply(xprt, msg)
-SVCXPRT *xprt;
-struct rpc_msg *msg;
-{
-	register struct svcraw_private *srp = svcraw_private;
-	register XDR *xdrs;
-
-	if (srp == 0)
-		return (FALSE);
-	xdrs = &srp->xdr_stream;
-	xdrs->x_op = XDR_ENCODE;
-	XDR_SETPOS(xdrs, 0);
-	if (!xdr_replymsg(xdrs, msg))
-		return (FALSE);
-	(void) XDR_GETPOS(xdrs);	/* called just for overhead */
-	return (TRUE);
-}
-
-static bool_t svcraw_getargs(xprt, xdr_args, args_ptr)
-SVCXPRT *xprt;
-xdrproc_t xdr_args;
-caddr_t args_ptr;
-{
-	register struct svcraw_private *srp = svcraw_private;
-
-	if (srp == 0)
-		return (FALSE);
-	return ((*xdr_args) (&srp->xdr_stream, args_ptr));
-}
-
-static bool_t svcraw_freeargs(xprt, xdr_args, args_ptr)
-SVCXPRT *xprt;
-xdrproc_t xdr_args;
-caddr_t args_ptr;
-{
-	register struct svcraw_private *srp = svcraw_private;
-	register XDR *xdrs;
-
-	if (srp == 0)
-		return (FALSE);
-	xdrs = &srp->xdr_stream;
-	xdrs->x_op = XDR_FREE;
-	return ((*xdr_args) (xdrs, args_ptr));
-}
-
-static void svcraw_destroy()
-{
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc_run.c b/mdk-stage1/dietlibc/librpc/svc_run.c
deleted file mode 100644
index c7150e357..000000000
--- a/mdk-stage1/dietlibc/librpc/svc_run.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* @(#)svc_run.c	2.1 88/07/29 4.0 RPCSRC */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)svc_run.c 1.1 87/10/13 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-
-/*
- * This is the rpc server side idle loop
- * Wait for input, call server program.
- */
-#include <rpc/rpc.h>
-#include <errno.h>
-#include <unistd.h>
-
-void svc_run()
-{
-#ifdef FD_SETSIZE
-	fd_set readfds;
-#else
-	int readfds;
-#endif							/* def FD_SETSIZE */
-	extern int errno;
-
-	for (;;) {
-#ifdef FD_SETSIZE
-		readfds = svc_fdset;
-#else
-		readfds = svc_fds;
-#endif							/* def FD_SETSIZE */
-		switch (select(_rpc_dtablesize(), &readfds, 0, 0, 0)) {
-		case -1:
-			if (errno == EINTR) {
-				continue;
-			}
-			perror("svc_run: - select failed");
-			return;
-		case 0:
-			continue;
-		default:
-			svc_getreqset(&readfds);
-		}
-	}
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc_simple.c b/mdk-stage1/dietlibc/librpc/svc_simple.c
deleted file mode 100644
index 0bb9a19eb..000000000
--- a/mdk-stage1/dietlibc/librpc/svc_simple.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/* @(#)svc_simple.c	2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)svc_simple.c 1.18 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/* 
- * svc_simple.c
- * Simplified front end to rpc.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <stdio.h>
-#include <rpc/rpc.h>
-#include <sys/socket.h>
-#include <netdb.h>
-#include <rpc/pmap_clnt.h>
-#include <string.h>
-
-static struct proglst {
-	char *(*p_progname) ();
-	int p_prognum;
-	int p_procnum;
-	xdrproc_t p_inproc, p_outproc;
-	struct proglst *p_nxt;
-} *proglst;
-static void universal();
-static SVCXPRT *transp;
-struct proglst *pl;
-
-int registerrpc(int prognum, int versnum, int procnum, char *(*progname)(), xdrproc_t inproc, xdrproc_t outproc)
-{
-
-	if (procnum == NULLPROC) {
-		(void) fprintf(stderr,
-					   "can't reassign procedure number %d\n", NULLPROC);
-		return (-1);
-	}
-	if (transp == 0) {
-		transp = svcudp_create(RPC_ANYSOCK);
-		if (transp == NULL) {
-			(void) fprintf(stderr, "couldn't create an rpc server\n");
-			return (-1);
-		}
-	}
-	(void) pmap_unset((u_long) prognum, (u_long) versnum);
-	if (!svc_register(transp, (u_long) prognum, (u_long) versnum,
-					  universal, IPPROTO_UDP)) {
-		(void) fprintf(stderr, "couldn't register prog %d vers %d\n",
-					   prognum, versnum);
-		return (-1);
-	}
-	pl = (struct proglst *) malloc(sizeof(struct proglst));
-
-	if (pl == NULL) {
-		(void) fprintf(stderr, "registerrpc: out of memory\n");
-		return (-1);
-	}
-	pl->p_progname = progname;
-	pl->p_prognum = prognum;
-	pl->p_procnum = procnum;
-	pl->p_inproc = inproc;
-	pl->p_outproc = outproc;
-	pl->p_nxt = proglst;
-	proglst = pl;
-	return (0);
-}
-
-static void universal(rqstp, transp)
-struct svc_req *rqstp;
-SVCXPRT *transp;
-{
-	int prog, proc;
-	char *outdata;
-	char xdrbuf[UDPMSGSIZE];
-	struct proglst *pl;
-
-	/* 
-	 * enforce "procnum 0 is echo" convention
-	 */
-	if (rqstp->rq_proc == NULLPROC) {
-		if (svc_sendreply(transp, (xdrproc_t)xdr_void, (char *) NULL) == FALSE) {
-			(void) fprintf(stderr, "xxx\n");
-			exit(1);
-		}
-		return;
-	}
-	prog = rqstp->rq_prog;
-	proc = rqstp->rq_proc;
-	for (pl = proglst; pl != NULL; pl = pl->p_nxt)
-		if (pl->p_prognum == prog && pl->p_procnum == proc) {
-			/* decode arguments into a CLEAN buffer */
-			bzero(xdrbuf, sizeof(xdrbuf));	/* required ! */
-			if (!svc_getargs(transp, pl->p_inproc, xdrbuf)) {
-				svcerr_decode(transp);
-				return;
-			}
-			outdata = (*(pl->p_progname)) (xdrbuf);
-			if (outdata == NULL && pl->p_outproc != (xdrproc_t)xdr_void)
-				/* there was an error */
-				return;
-			if (!svc_sendreply(transp, pl->p_outproc, outdata)) {
-				(void) fprintf(stderr,
-							   "trouble replying to prog %d\n",
-							   pl->p_prognum);
-				exit(1);
-			}
-			/* free the decoded arguments */
-			(void) svc_freeargs(transp, pl->p_inproc, xdrbuf);
-			return;
-		}
-	(void) fprintf(stderr, "never registered prog %d\n", prog);
-	exit(1);
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc_tcp.c b/mdk-stage1/dietlibc/librpc/svc_tcp.c
deleted file mode 100644
index 6edafa1b1..000000000
--- a/mdk-stage1/dietlibc/librpc/svc_tcp.c
+++ /dev/null
@@ -1,406 +0,0 @@
-/* @(#)svc_tcp.c	2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)svc_tcp.c 1.21 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * svc_tcp.c, Server side for TCP/IP based RPC. 
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * Actually implements two flavors of transporter -
- * a tcp rendezvouser (a listner and connection establisher)
- * and a record/tcp stream.
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <rpc/rpc.h>
-#include <sys/socket.h>
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-
-/*
- * Ops vector for TCP/IP based rpc service handle
- */
-static bool_t svctcp_recv();
-static enum xprt_stat svctcp_stat();
-static bool_t svctcp_getargs();
-static bool_t svctcp_reply();
-static bool_t svctcp_freeargs();
-static void svctcp_destroy();
-
-static struct xp_ops svctcp_op = {
-	svctcp_recv,
-	svctcp_stat,
-	svctcp_getargs,
-	svctcp_reply,
-	svctcp_freeargs,
-	svctcp_destroy
-};
-
-/*
- * Ops vector for TCP/IP rendezvous handler
- */
-static bool_t rendezvous_request();
-static enum xprt_stat rendezvous_stat();
-
-static struct xp_ops svctcp_rendezvous_op = {
-	rendezvous_request,
-	rendezvous_stat,
-	(void*)abort,
-	(void*)abort,
-	(void*)abort,
-	svctcp_destroy
-};
-
-static int readtcp(), writetcp();
-static SVCXPRT *makefd_xprt();
-
-struct tcp_rendezvous {			/* kept in xprt->xp_p1 */
-	u_int sendsize;
-	u_int recvsize;
-};
-
-struct tcp_conn {				/* kept in xprt->xp_p1 */
-	enum xprt_stat strm_stat;
-	u_long x_id;
-	XDR xdrs;
-	char verf_body[MAX_AUTH_BYTES];
-};
-
-/*
- * Usage:
- *	xprt = svctcp_create(sock, send_buf_size, recv_buf_size);
- *
- * Creates, registers, and returns a (rpc) tcp based transporter.
- * Once *xprt is initialized, it is registered as a transporter
- * see (svc.h, xprt_register).  This routine returns
- * a NULL if a problem occurred.
- *
- * If sock<0 then a socket is created, else sock is used.
- * If the socket, sock is not bound to a port then svctcp_create
- * binds it to an arbitrary port.  The routine then starts a tcp
- * listener on the socket's associated port.  In any (successful) case,
- * xprt->xp_sock is the registered socket number and xprt->xp_port is the
- * associated port number.
- *
- * Since tcp streams do buffered io similar to stdio, the caller can specify
- * how big the send and receive buffers are via the second and third parms;
- * 0 => use the system default.
- */
-SVCXPRT *svctcp_create(sock, sendsize, recvsize)
-register int sock;
-u_int sendsize;
-u_int recvsize;
-{
-	bool_t madesock = FALSE;
-	register SVCXPRT *xprt;
-	register struct tcp_rendezvous *r;
-	struct sockaddr_in addr;
-	int len = sizeof(struct sockaddr_in);
-
-	if (sock == RPC_ANYSOCK) {
-		if ((sock = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP)) < 0) {
-			perror("svc_tcp.c - tcp socket creation problem");
-			return ((SVCXPRT *) NULL);
-		}
-		madesock = TRUE;
-	}
-	bzero((char *) &addr, sizeof(addr));
-	addr.sin_family = AF_INET;
-	if (bindresvport(sock, &addr)) {
-		addr.sin_port = 0;
-		(void) bind(sock, (struct sockaddr *) &addr, len);
-	}
-	if ((getsockname(sock, (struct sockaddr *) &addr, &len) != 0) ||
-		(listen(sock, 2) != 0)) {
-		perror("svctcp_.c - cannot getsockname or listen");
-		if (madesock)
-			(void) close(sock);
-		return ((SVCXPRT *) NULL);
-	}
-	r = (struct tcp_rendezvous *) mem_alloc(sizeof(*r));
-	if (r == NULL) {
-		(void) fprintf(stderr, "svctcp_create: out of memory\n");
-		return (NULL);
-	}
-	r->sendsize = sendsize;
-	r->recvsize = recvsize;
-	xprt = (SVCXPRT *) mem_alloc(sizeof(SVCXPRT));
-	if (xprt == NULL) {
-		(void) fprintf(stderr, "svctcp_create: out of memory\n");
-		return (NULL);
-	}
-	xprt->xp_p2 = NULL;
-	xprt->xp_p1 = (caddr_t) r;
-	xprt->xp_verf = _null_auth;
-	xprt->xp_ops = &svctcp_rendezvous_op;
-	xprt->xp_port = ntohs(addr.sin_port);
-	xprt->xp_sock = sock;
-	xprt_register(xprt);
-	return (xprt);
-}
-
-/*
- * Like svtcp_create(), except the routine takes any *open* UNIX file
- * descriptor as its first input.
- */
-SVCXPRT *svcfd_create(fd, sendsize, recvsize)
-int fd;
-u_int sendsize;
-u_int recvsize;
-{
-
-	return (makefd_xprt(fd, sendsize, recvsize));
-}
-
-static SVCXPRT *makefd_xprt(fd, sendsize, recvsize)
-int fd;
-u_int sendsize;
-u_int recvsize;
-{
-	register SVCXPRT *xprt;
-	register struct tcp_conn *cd;
-
-	xprt = (SVCXPRT *) mem_alloc(sizeof(SVCXPRT));
-	if (xprt == (SVCXPRT *) NULL) {
-		(void) fprintf(stderr, "svc_tcp: makefd_xprt: out of memory\n");
-		goto done;
-	}
-	cd = (struct tcp_conn *) mem_alloc(sizeof(struct tcp_conn));
-
-	if (cd == (struct tcp_conn *) NULL) {
-		(void) fprintf(stderr, "svc_tcp: makefd_xprt: out of memory\n");
-		mem_free((char *) xprt, sizeof(SVCXPRT));
-		xprt = (SVCXPRT *) NULL;
-		goto done;
-	}
-	cd->strm_stat = XPRT_IDLE;
-	xdrrec_create(&(cd->xdrs), sendsize, recvsize,
-				  (caddr_t) xprt, readtcp, writetcp);
-	xprt->xp_p2 = NULL;
-	xprt->xp_p1 = (caddr_t) cd;
-	xprt->xp_verf.oa_base = cd->verf_body;
-	xprt->xp_addrlen = 0;
-	xprt->xp_ops = &svctcp_op;	/* truely deals with calls */
-	xprt->xp_port = 0;			/* this is a connection, not a rendezvouser */
-	xprt->xp_sock = fd;
-	xprt_register(xprt);
-  done:
-	return (xprt);
-}
-
-static bool_t rendezvous_request(xprt)
-register SVCXPRT *xprt;
-{
-	int sock;
-	struct tcp_rendezvous *r;
-	struct sockaddr_in addr;
-	int len;
-
-	r = (struct tcp_rendezvous *) xprt->xp_p1;
-  again:
-	len = sizeof(struct sockaddr_in);
-
-	if ((sock = accept(xprt->xp_sock, (struct sockaddr *) &addr,
-					   &len)) < 0) {
-		if (errno == EINTR)
-			goto again;
-		return (FALSE);
-	}
-	/*
-	 * make a new transporter (re-uses xprt)
-	 */
-	xprt = makefd_xprt(sock, r->sendsize, r->recvsize);
-	xprt->xp_raddr = addr;
-	xprt->xp_addrlen = len;
-	return (FALSE);				/* there is never an rpc msg to be processed */
-}
-
-static enum xprt_stat rendezvous_stat()
-{
-
-	return (XPRT_IDLE);
-}
-
-static void svctcp_destroy(xprt)
-register SVCXPRT *xprt;
-{
-	register struct tcp_conn *cd = (struct tcp_conn *) xprt->xp_p1;
-
-	xprt_unregister(xprt);
-	(void) close(xprt->xp_sock);
-	if (xprt->xp_port != 0) {
-		/* a rendezvouser socket */
-		xprt->xp_port = 0;
-	} else {
-		/* an actual connection socket */
-		XDR_DESTROY(&(cd->xdrs));
-	}
-	mem_free((caddr_t) cd, sizeof(struct tcp_conn));
-
-	mem_free((caddr_t) xprt, sizeof(SVCXPRT));
-}
-
-/*
- * All read operations timeout after 35 seconds.
- * A timeout is fatal for the connection.
- */
-static struct timeval wait_per_try = { 35, 0 };
-
-/*
- * reads data from the tcp conection.
- * any error is fatal and the connection is closed.
- * (And a read of zero bytes is a half closed stream => error.)
- */
-static int readtcp(xprt, buf, len)
-register SVCXPRT *xprt;
-caddr_t buf;
-register int len;
-{
-	register int sock = xprt->xp_sock;
-
-#ifdef FD_SETSIZE
-	fd_set mask;
-	fd_set readfds;
-
-	FD_ZERO(&mask);
-	FD_SET(sock, &mask);
-#else
-	register int mask = 1 << sock;
-	int readfds;
-#endif							/* def FD_SETSIZE */
-	do {
-		readfds = mask;
-		if (select(_rpc_dtablesize(), &readfds, 0, 0, &wait_per_try) <= 0) {
-			if (errno == EINTR) {
-				continue;
-			}
-			goto fatal_err;
-		}
-#ifdef FD_SETSIZE
-	} while (!FD_ISSET(sock, &readfds));
-#else
-	} while (readfds != mask);
-#endif							/* def FD_SETSIZE */
-	if ((len = read(sock, buf, len)) > 0) {
-		return (len);
-	}
-  fatal_err:
-	((struct tcp_conn *) (xprt->xp_p1))->strm_stat = XPRT_DIED;
-	return (-1);
-}
-
-/*
- * writes data to the tcp connection.
- * Any error is fatal and the connection is closed.
- */
-static int writetcp(xprt, buf, len)
-register SVCXPRT *xprt;
-caddr_t buf;
-int len;
-{
-	register int i, cnt;
-
-	for (cnt = len; cnt > 0; cnt -= i, buf += i) {
-		if ((i = write(xprt->xp_sock, buf, cnt)) < 0) {
-			((struct tcp_conn *) (xprt->xp_p1))->strm_stat = XPRT_DIED;
-			return (-1);
-		}
-	}
-	return (len);
-}
-
-static enum xprt_stat svctcp_stat(xprt)
-SVCXPRT *xprt;
-{
-	register struct tcp_conn *cd = (struct tcp_conn *) (xprt->xp_p1);
-
-	if (cd->strm_stat == XPRT_DIED)
-		return (XPRT_DIED);
-	if (!xdrrec_eof(&(cd->xdrs)))
-		return (XPRT_MOREREQS);
-	return (XPRT_IDLE);
-}
-
-static bool_t svctcp_recv(xprt, msg)
-SVCXPRT *xprt;
-register struct rpc_msg *msg;
-{
-	register struct tcp_conn *cd = (struct tcp_conn *) (xprt->xp_p1);
-	register XDR *xdrs = &(cd->xdrs);
-
-	xdrs->x_op = XDR_DECODE;
-	(void) xdrrec_skiprecord(xdrs);
-	if (xdr_callmsg(xdrs, msg)) {
-		cd->x_id = msg->rm_xid;
-		return (TRUE);
-	}
-	return (FALSE);
-}
-
-static bool_t svctcp_getargs(xprt, xdr_args, args_ptr)
-SVCXPRT *xprt;
-xdrproc_t xdr_args;
-caddr_t args_ptr;
-{
-
-	return ((*xdr_args)
-			(&(((struct tcp_conn *) (xprt->xp_p1))->xdrs), args_ptr));
-}
-
-static bool_t svctcp_freeargs(xprt, xdr_args, args_ptr)
-SVCXPRT *xprt;
-xdrproc_t xdr_args;
-caddr_t args_ptr;
-{
-	register XDR *xdrs = &(((struct tcp_conn *) (xprt->xp_p1))->xdrs);
-
-	xdrs->x_op = XDR_FREE;
-	return ((*xdr_args) (xdrs, args_ptr));
-}
-
-static bool_t svctcp_reply(xprt, msg)
-SVCXPRT *xprt;
-register struct rpc_msg *msg;
-{
-	register struct tcp_conn *cd = (struct tcp_conn *) (xprt->xp_p1);
-	register XDR *xdrs = &(cd->xdrs);
-	register bool_t stat;
-
-	xdrs->x_op = XDR_ENCODE;
-	msg->rm_xid = cd->x_id;
-	stat = xdr_replymsg(xdrs, msg);
-	(void) xdrrec_endofrecord(xdrs, TRUE);
-	return (stat);
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc_udp.c b/mdk-stage1/dietlibc/librpc/svc_udp.c
deleted file mode 100644
index 1cdb5ce91..000000000
--- a/mdk-stage1/dietlibc/librpc/svc_udp.c
+++ /dev/null
@@ -1,467 +0,0 @@
-/* @(#)svc_udp.c	2.2 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)svc_udp.c 1.24 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * svc_udp.c,
- * Server side for UDP/IP based RPC.  (Does some caching in the hopes of
- * achieving execute-at-most-once semantics.)
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <stdio.h>
-#include <rpc/rpc.h>
-#include <sys/socket.h>
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-
-
-#define rpc_buffer(xprt) ((xprt)->xp_p1)
-#define MAX(a, b)     ((a > b) ? a : b)
-
-static bool_t svcudp_recv();
-static bool_t svcudp_reply();
-static enum xprt_stat svcudp_stat();
-static bool_t svcudp_getargs();
-static bool_t svcudp_freeargs();
-static void svcudp_destroy();
-
-static struct xp_ops svcudp_op = {
-	svcudp_recv,
-	svcudp_stat,
-	svcudp_getargs,
-	svcudp_reply,
-	svcudp_freeargs,
-	svcudp_destroy
-};
-
-extern int errno;
-
-/*
- * kept in xprt->xp_p2
- */
-struct svcudp_data {
-	u_int su_iosz;				/* byte size of send.recv buffer */
-	u_long su_xid;				/* transaction id */
-	XDR su_xdrs;				/* XDR handle */
-	char su_verfbody[MAX_AUTH_BYTES];	/* verifier body */
-	char *su_cache;				/* cached data, NULL if no cache */
-};
-
-#define	su_data(xprt)	((struct svcudp_data *)(xprt->xp_p2))
-
-static int cache_get(SVCXPRT* xprt, struct rpc_msg* msg, char** replyp, u_long* replylenp);
-static void cache_set(SVCXPRT* xprt, u_long replylen);
-
-/*
- * Usage:
- *	xprt = svcudp_create(sock);
- *
- * If sock<0 then a socket is created, else sock is used.
- * If the socket, sock is not bound to a port then svcudp_create
- * binds it to an arbitrary port.  In any (successful) case,
- * xprt->xp_sock is the registered socket number and xprt->xp_port is the
- * associated port number.
- * Once *xprt is initialized, it is registered as a transporter;
- * see (svc.h, xprt_register).
- * The routines returns NULL if a problem occurred.
- */
-SVCXPRT *svcudp_bufcreate(sock, sendsz, recvsz)
-register int sock;
-u_int sendsz, recvsz;
-{
-	bool_t madesock = FALSE;
-	register SVCXPRT *xprt;
-	register struct svcudp_data *su;
-	struct sockaddr_in addr;
-	int len = sizeof(struct sockaddr_in);
-
-	if (sock == RPC_ANYSOCK) {
-		if ((sock = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP)) < 0) {
-			perror("svcudp_create: socket creation problem");
-			return ((SVCXPRT *) NULL);
-		}
-		madesock = TRUE;
-	}
-	bzero((char *) &addr, sizeof(addr));
-	addr.sin_family = AF_INET;
-	if (bindresvport(sock, &addr)) {
-		addr.sin_port = 0;
-		(void) bind(sock, (struct sockaddr *) &addr, len);
-	}
-	if (getsockname(sock, (struct sockaddr *) &addr, &len) != 0) {
-		perror("svcudp_create - cannot getsockname");
-		if (madesock)
-			(void) close(sock);
-		return ((SVCXPRT *) NULL);
-	}
-	xprt = (SVCXPRT *) mem_alloc(sizeof(SVCXPRT));
-	if (xprt == NULL) {
-		(void) fprintf(stderr, "svcudp_create: out of memory\n");
-		return (NULL);
-	}
-	su = (struct svcudp_data *) mem_alloc(sizeof(*su));
-	if (su == NULL) {
-		(void) fprintf(stderr, "svcudp_create: out of memory\n");
-		return (NULL);
-	}
-	su->su_iosz = ((MAX(sendsz, recvsz) + 3) / 4) * 4;
-	if ((rpc_buffer(xprt) = mem_alloc(su->su_iosz)) == NULL) {
-		(void) fprintf(stderr, "svcudp_create: out of memory\n");
-		return (NULL);
-	}
-	xdrmem_create(&(su->su_xdrs), rpc_buffer(xprt), su->su_iosz,
-				  XDR_DECODE);
-	su->su_cache = NULL;
-	xprt->xp_p2 = (caddr_t) su;
-	xprt->xp_verf.oa_base = su->su_verfbody;
-	xprt->xp_ops = &svcudp_op;
-	xprt->xp_port = ntohs(addr.sin_port);
-	xprt->xp_sock = sock;
-	xprt_register(xprt);
-	return (xprt);
-}
-
-SVCXPRT *svcudp_create(sock)
-int sock;
-{
-
-	return (svcudp_bufcreate(sock, UDPMSGSIZE, UDPMSGSIZE));
-}
-
-static enum xprt_stat svcudp_stat(xprt)
-SVCXPRT *xprt;
-{
-
-	return (XPRT_IDLE);
-}
-
-static bool_t svcudp_recv(xprt, msg)
-register SVCXPRT *xprt;
-struct rpc_msg *msg;
-{
-	register struct svcudp_data *su = su_data(xprt);
-	register XDR *xdrs = &(su->su_xdrs);
-	register int rlen;
-	char *reply;
-	u_long replylen;
-
-  again:
-	xprt->xp_addrlen = sizeof(struct sockaddr_in);
-
-	rlen = recvfrom(xprt->xp_sock, rpc_buffer(xprt), (int) su->su_iosz,
-					0, (struct sockaddr *) &(xprt->xp_raddr),
-					&(xprt->xp_addrlen));
-	if (rlen == -1 && errno == EINTR)
-		goto again;
-	if (rlen < 4 * sizeof(u_long))
-		return (FALSE);
-	xdrs->x_op = XDR_DECODE;
-	XDR_SETPOS(xdrs, 0);
-	if (!xdr_callmsg(xdrs, msg))
-		return (FALSE);
-	su->su_xid = msg->rm_xid;
-	if (su->su_cache != NULL) {
-		if (cache_get(xprt, msg, &reply, &replylen)) {
-			(void) sendto(xprt->xp_sock, reply, (int) replylen, 0,
-						  (struct sockaddr *) &xprt->xp_raddr,
-						  xprt->xp_addrlen);
-			return (TRUE);
-		}
-	}
-	return (TRUE);
-}
-
-static bool_t svcudp_reply(xprt, msg)
-register SVCXPRT *xprt;
-struct rpc_msg *msg;
-{
-	register struct svcudp_data *su = su_data(xprt);
-	register XDR *xdrs = &(su->su_xdrs);
-	register int slen;
-	register bool_t stat = FALSE;
-
-	xdrs->x_op = XDR_ENCODE;
-	XDR_SETPOS(xdrs, 0);
-	msg->rm_xid = su->su_xid;
-	if (xdr_replymsg(xdrs, msg)) {
-		slen = (int) XDR_GETPOS(xdrs);
-		if (sendto(xprt->xp_sock, rpc_buffer(xprt), slen, 0,
-				   (struct sockaddr *) &(xprt->xp_raddr), xprt->xp_addrlen)
-			== slen) {
-			stat = TRUE;
-			if (su->su_cache && slen >= 0) {
-				cache_set(xprt, (u_long) slen);
-			}
-		}
-	}
-	return (stat);
-}
-
-static bool_t svcudp_getargs(xprt, xdr_args, args_ptr)
-SVCXPRT *xprt;
-xdrproc_t xdr_args;
-caddr_t args_ptr;
-{
-
-	return ((*xdr_args) (&(su_data(xprt)->su_xdrs), args_ptr));
-}
-
-static bool_t svcudp_freeargs(xprt, xdr_args, args_ptr)
-SVCXPRT *xprt;
-xdrproc_t xdr_args;
-caddr_t args_ptr;
-{
-	register XDR *xdrs = &(su_data(xprt)->su_xdrs);
-
-	xdrs->x_op = XDR_FREE;
-	return ((*xdr_args) (xdrs, args_ptr));
-}
-
-static void svcudp_destroy(xprt)
-register SVCXPRT *xprt;
-{
-	register struct svcudp_data *su = su_data(xprt);
-
-	xprt_unregister(xprt);
-	(void) close(xprt->xp_sock);
-	XDR_DESTROY(&(su->su_xdrs));
-	mem_free(rpc_buffer(xprt), su->su_iosz);
-	mem_free((caddr_t) su, sizeof(struct svcudp_data));
-
-	mem_free((caddr_t) xprt, sizeof(SVCXPRT));
-}
-
-
-/***********this could be a separate file*********************/
-
-/*
- * Fifo cache for udp server
- * Copies pointers to reply buffers into fifo cache
- * Buffers are sent again if retransmissions are detected.
- */
-
-#define SPARSENESS 4			/* 75% sparse */
-
-#define CACHE_PERROR(msg)	\
-	(void) fprintf(stderr,"%s\n", msg)
-
-#define ALLOC(type, size)	\
-	(type *) mem_alloc((unsigned) (sizeof(type) * (size)))
-
-#define BZERO(addr, type, size)	 \
-	bzero((char *) addr, sizeof(type) * (int) (size))
-
-/*
- * An entry in the cache
- */
-typedef struct cache_node *cache_ptr;
-struct cache_node {
-	/*
-	 * Index into cache is xid, proc, vers, prog and address
-	 */
-	u_long cache_xid;
-	u_long cache_proc;
-	u_long cache_vers;
-	u_long cache_prog;
-	struct sockaddr_in cache_addr;
-	/*
-	 * The cached reply and length
-	 */
-	char *cache_reply;
-	u_long cache_replylen;
-	/*
-	 * Next node on the list, if there is a collision
-	 */
-	cache_ptr cache_next;
-};
-
-
-
-/*
- * The entire cache
- */
-struct udp_cache {
-	u_long uc_size;				/* size of cache */
-	cache_ptr *uc_entries;		/* hash table of entries in cache */
-	cache_ptr *uc_fifo;			/* fifo list of entries in cache */
-	u_long uc_nextvictim;		/* points to next victim in fifo list */
-	u_long uc_prog;				/* saved program number */
-	u_long uc_vers;				/* saved version number */
-	u_long uc_proc;				/* saved procedure number */
-	struct sockaddr_in uc_addr;	/* saved caller's address */
-};
-
-
-/*
- * the hashing function
- */
-#define CACHE_LOC(transp, xid)	\
- (xid % (SPARSENESS*((struct udp_cache *) su_data(transp)->su_cache)->uc_size))
-
-
-/*
- * Enable use of the cache. 
- * Note: there is no disable.
- */
-int svcudp_enablecache(SVCXPRT* transp, u_long size)
-{
-	struct svcudp_data *su = su_data(transp);
-	struct udp_cache *uc;
-
-	if (su->su_cache != NULL) {
-		CACHE_PERROR("enablecache: cache already enabled");
-		return (0);
-	}
-	uc = ALLOC(struct udp_cache, 1);
-	if (uc == NULL) {
-		CACHE_PERROR("enablecache: could not allocate cache");
-		return (0);
-	}
-	uc->uc_size = size;
-	uc->uc_nextvictim = 0;
-	uc->uc_entries = ALLOC(cache_ptr, size * SPARSENESS);
-	if (uc->uc_entries == NULL) {
-		CACHE_PERROR("enablecache: could not allocate cache data");
-		return (0);
-	}
-	BZERO(uc->uc_entries, cache_ptr, size * SPARSENESS);
-	uc->uc_fifo = ALLOC(cache_ptr, size);
-	if (uc->uc_fifo == NULL) {
-		CACHE_PERROR("enablecache: could not allocate cache fifo");
-		return (0);
-	}
-	BZERO(uc->uc_fifo, cache_ptr, size);
-	su->su_cache = (char *) uc;
-	return (1);
-}
-
-
-/*
- * Set an entry in the cache
- */
-static void cache_set(SVCXPRT* xprt, u_long replylen)
-{
-	register cache_ptr victim;
-	register cache_ptr *vicp;
-	register struct svcudp_data *su = su_data(xprt);
-	struct udp_cache *uc = (struct udp_cache *) su->su_cache;
-	u_int loc;
-	char *newbuf;
-
-	/*
-	 * Find space for the new entry, either by
-	 * reusing an old entry, or by mallocing a new one
-	 */
-	victim = uc->uc_fifo[uc->uc_nextvictim];
-	if (victim != NULL) {
-		loc = CACHE_LOC(xprt, victim->cache_xid);
-		for (vicp = &uc->uc_entries[loc];
-			 *vicp != NULL && *vicp != victim;
-			 vicp = &(*vicp)->cache_next);
-		if (*vicp == NULL) {
-			CACHE_PERROR("cache_set: victim not found");
-			return;
-		}
-		*vicp = victim->cache_next;	/* remote from cache */
-		newbuf = victim->cache_reply;
-	} else {
-		victim = ALLOC(struct cache_node, 1);
-
-		if (victim == NULL) {
-			CACHE_PERROR("cache_set: victim alloc failed");
-			return;
-		}
-		newbuf = mem_alloc(su->su_iosz);
-		if (newbuf == NULL) {
-			CACHE_PERROR("cache_set: could not allocate new rpc_buffer");
-			return;
-		}
-	}
-
-	/*
-	 * Store it away
-	 */
-	victim->cache_replylen = replylen;
-	victim->cache_reply = rpc_buffer(xprt);
-	rpc_buffer(xprt) = newbuf;
-	xdrmem_create(&(su->su_xdrs), rpc_buffer(xprt), su->su_iosz,
-				  XDR_ENCODE);
-	victim->cache_xid = su->su_xid;
-	victim->cache_proc = uc->uc_proc;
-	victim->cache_vers = uc->uc_vers;
-	victim->cache_prog = uc->uc_prog;
-	victim->cache_addr = uc->uc_addr;
-	loc = CACHE_LOC(xprt, victim->cache_xid);
-	victim->cache_next = uc->uc_entries[loc];
-	uc->uc_entries[loc] = victim;
-	uc->uc_fifo[uc->uc_nextvictim++] = victim;
-	uc->uc_nextvictim %= uc->uc_size;
-}
-
-/*
- * Try to get an entry from the cache
- * return 1 if found, 0 if not found
- */
-static int cache_get(SVCXPRT* xprt, struct rpc_msg* msg, char** replyp, u_long* replylenp)
-{
-	u_int loc;
-	register cache_ptr ent;
-	register struct svcudp_data *su = su_data(xprt);
-	register struct udp_cache *uc = (struct udp_cache *) su->su_cache;
-
-#	define EQADDR(a1, a2)	(bcmp((char*)&a1, (char*)&a2, sizeof(a1)) == 0)
-
-	loc = CACHE_LOC(xprt, su->su_xid);
-	for (ent = uc->uc_entries[loc]; ent != NULL; ent = ent->cache_next) {
-		if (ent->cache_xid == su->su_xid &&
-			ent->cache_proc == uc->uc_proc &&
-			ent->cache_vers == uc->uc_vers &&
-			ent->cache_prog == uc->uc_prog &&
-			EQADDR(ent->cache_addr, uc->uc_addr)) {
-			*replyp = ent->cache_reply;
-			*replylenp = ent->cache_replylen;
-			return (1);
-		}
-	}
-	/*
-	 * Failed to find entry
-	 * Remember a few things so we can do a set later
-	 */
-	uc->uc_proc = msg->rm_call.cb_proc;
-	uc->uc_vers = msg->rm_call.cb_vers;
-	uc->uc_prog = msg->rm_call.cb_prog;
-	uc->uc_addr = xprt->xp_raddr;
-	return (0);
-}
diff --git a/mdk-stage1/dietlibc/librpc/xdr.c b/mdk-stage1/dietlibc/librpc/xdr.c
deleted file mode 100644
index 864b47dea..000000000
--- a/mdk-stage1/dietlibc/librpc/xdr.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/* @(#)xdr.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)xdr.c 1.35 87/08/12";
-#endif
-
-/*
- * xdr.c, Generic XDR routines implementation.
- *
- * Copyright (C) 1986, Sun Microsystems, Inc.
- *
- * These are the "generic" xdr routines used to serialize and de-serialize
- * most common data items.  See xdr.h for more info on the interface to
- * xdr.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <string.h>
-
-/*
- * constants specific to the xdr "protocol"
- */
-#define XDR_FALSE	((long) 0)
-#define XDR_TRUE	((long) 1)
-#define LASTUNSIGNED	((u_int) 0-1)
-
-/*
- * for unit alignment
- */
-static char xdr_zero[BYTES_PER_XDR_UNIT] = { 0, 0, 0, 0 };
-
-/*
- * Free a data structure using XDR
- * Not a filter, but a convenient utility nonetheless
- */
-void xdr_free(xdrproc_t proc, char* objp)
-{
-	XDR x;
-
-	x.x_op = XDR_FREE;
-	(*proc) (&x, objp);
-}
-
-/*
- * XDR nothing
- */
-bool_t xdr_void( /* xdrs, addr */ )
-	/* XDR *xdrs; */
-	/* caddr_t addr; */
-{
-
-	return (TRUE);
-}
-
-/*
- * XDR integers
- */
-bool_t xdr_int(XDR* xdrs, int* ip)
-{
-
-#ifdef lint
-	(void) (xdr_short(xdrs, (short *) ip));
-	return (xdr_long(xdrs, (long *) ip));
-#else
-	if (sizeof(int) == sizeof(long)) {
-		return (xdr_long(xdrs, (long *) ip));
-	} else {
-		return (xdr_short(xdrs, (short *) ip));
-	}
-#endif
-}
-
-/*
- * XDR unsigned integers
- */
-bool_t xdr_u_int(XDR* xdrs, unsigned int* up)
-{
-
-#ifdef lint
-	(void) (xdr_short(xdrs, (short *) up));
-	return (xdr_u_long(xdrs, (u_long *) up));
-#else
-	if (sizeof(u_int) == sizeof(u_long)) {
-		return (xdr_u_long(xdrs, (u_long *) up));
-	} else {
-		return (xdr_short(xdrs, (short *) up));
-	}
-#endif
-}
-
-/*
- * XDR long integers
- * same as xdr_u_long - open coded to save a proc call!
- */
-bool_t xdr_long(XDR* xdrs, long* lp)
-{
-
-	if (xdrs->x_op == XDR_ENCODE)
-		return (XDR_PUTLONG(xdrs, lp));
-
-	if (xdrs->x_op == XDR_DECODE)
-		return (XDR_GETLONG(xdrs, lp));
-
-	if (xdrs->x_op == XDR_FREE)
-		return (TRUE);
-
-	return (FALSE);
-}
-
-/*
- * XDR unsigned long integers
- * same as xdr_long - open coded to save a proc call!
- */
-bool_t xdr_u_long(XDR* xdrs, unsigned long* ulp)
-{
-
-	if (xdrs->x_op == XDR_DECODE)
-		return (XDR_GETLONG(xdrs, (long *) ulp));
-	if (xdrs->x_op == XDR_ENCODE)
-		return (XDR_PUTLONG(xdrs, (long *) ulp));
-	if (xdrs->x_op == XDR_FREE)
-		return (TRUE);
-	return (FALSE);
-}
-
-/*
- * XDR short integers
- */
-bool_t xdr_short(XDR* xdrs, short* sp)
-{
-	long l;
-
-	switch (xdrs->x_op) {
-
-	case XDR_ENCODE:
-		l = (long) *sp;
-		return (XDR_PUTLONG(xdrs, &l));
-
-	case XDR_DECODE:
-		if (!XDR_GETLONG(xdrs, &l)) {
-			return (FALSE);
-		}
-		*sp = (short) l;
-		return (TRUE);
-
-	case XDR_FREE:
-		return (TRUE);
-	}
-	return (FALSE);
-}
-
-/*
- * XDR unsigned short integers
- */
-bool_t xdr_u_short(XDR* xdrs, unsigned short* usp)
-{
-	u_long l;
-
-	switch (xdrs->x_op) {
-
-	case XDR_ENCODE:
-		l = (u_long) * usp;
-		return (XDR_PUTLONG(xdrs, &l));
-
-	case XDR_DECODE:
-		if (!XDR_GETLONG(xdrs, &l)) {
-			return (FALSE);
-		}
-		*usp = (u_short) l;
-		return (TRUE);
-
-	case XDR_FREE:
-		return (TRUE);
-	}
-	return (FALSE);
-}
-
-
-/*
- * XDR a char
- */
-bool_t xdr_char(XDR* xdrs, char* cp)
-{
-	int i;
-
-	i = (*cp);
-	if (!xdr_int(xdrs, &i)) {
-		return (FALSE);
-	}
-	*cp = i;
-	return (TRUE);
-}
-
-/*
- * XDR an unsigned char
- */
-bool_t xdr_u_char(XDR* xdrs, unsigned char* cp)
-{
-	u_int u;
-
-	u = (*cp);
-	if (!xdr_u_int(xdrs, &u)) {
-		return (FALSE);
-	}
-	*cp = u;
-	return (TRUE);
-}
-
-/*
- * XDR booleans
- */
-bool_t xdr_bool(xdrs, bp)
-register XDR *xdrs;
-bool_t *bp;
-{
-	long lb;
-
-	switch (xdrs->x_op) {
-
-	case XDR_ENCODE:
-		lb = *bp ? XDR_TRUE : XDR_FALSE;
-		return (XDR_PUTLONG(xdrs, &lb));
-
-	case XDR_DECODE:
-		if (!XDR_GETLONG(xdrs, &lb)) {
-			return (FALSE);
-		}
-		*bp = (lb == XDR_FALSE) ? FALSE : TRUE;
-		return (TRUE);
-
-	case XDR_FREE:
-		return (TRUE);
-	}
-	return (FALSE);
-}
-
-/*
- * XDR enumerations
- */
-bool_t xdr_enum(xdrs, ep)
-XDR *xdrs;
-enum_t *ep;
-{
-#ifndef lint
-	enum sizecheck { SIZEVAL };	/* used to find the size of an enum */
-
-	/*
-	 * enums are treated as ints
-	 */
-	if (sizeof(enum sizecheck) == sizeof(long)) {
-		return (xdr_long(xdrs, (long *) ep));
-	} else if (sizeof(enum sizecheck) == sizeof(short)) {
-		return (xdr_short(xdrs, (short *) ep));
-	} else {
-		return (FALSE);
-	}
-#else
-	(void) (xdr_short(xdrs, (short *) ep));
-	return (xdr_long(xdrs, (long *) ep));
-#endif
-}
-
-/*
- * XDR opaque data
- * Allows the specification of a fixed size sequence of opaque bytes.
- * cp points to the opaque object and cnt gives the byte length.
- */
-bool_t xdr_opaque(xdrs, cp, cnt)
-register XDR *xdrs;
-caddr_t cp;
-register u_int cnt;
-{
-	register u_int rndup;
-	static char crud[BYTES_PER_XDR_UNIT];
-
-	/*
-	 * if no data we are done
-	 */
-	if (cnt == 0)
-		return (TRUE);
-
-	/*
-	 * round byte count to full xdr units
-	 */
-	rndup = cnt % BYTES_PER_XDR_UNIT;
-	if (rndup > 0)
-		rndup = BYTES_PER_XDR_UNIT - rndup;
-
-	if (xdrs->x_op == XDR_DECODE) {
-		if (!XDR_GETBYTES(xdrs, cp, cnt)) {
-			return (FALSE);
-		}
-		if (rndup == 0)
-			return (TRUE);
-		return (XDR_GETBYTES(xdrs, crud, rndup));
-	}
-
-	if (xdrs->x_op == XDR_ENCODE) {
-		if (!XDR_PUTBYTES(xdrs, cp, cnt)) {
-			return (FALSE);
-		}
-		if (rndup == 0)
-			return (TRUE);
-		return (XDR_PUTBYTES(xdrs, xdr_zero, rndup));
-	}
-
-	if (xdrs->x_op == XDR_FREE) {
-		return (TRUE);
-	}
-
-	return (FALSE);
-}
-
-/*
- * XDR counted bytes
- * *cpp is a pointer to the bytes, *sizep is the count.
- * If *cpp is NULL maxsize bytes are allocated
- */
-bool_t xdr_bytes(xdrs, cpp, sizep, maxsize)
-register XDR *xdrs;
-char **cpp;
-register u_int *sizep;
-u_int maxsize;
-{
-	register char *sp = *cpp;	/* sp is the actual string pointer */
-	register u_int nodesize;
-
-	/*
-	 * first deal with the length since xdr bytes are counted
-	 */
-	if (!xdr_u_int(xdrs, sizep)) {
-		return (FALSE);
-	}
-	nodesize = *sizep;
-	if ((nodesize > maxsize) && (xdrs->x_op != XDR_FREE)) {
-		return (FALSE);
-	}
-
-	/*
-	 * now deal with the actual bytes
-	 */
-	switch (xdrs->x_op) {
-
-	case XDR_DECODE:
-		if (nodesize == 0) {
-			return (TRUE);
-		}
-		if (sp == NULL) {
-			*cpp = sp = (char *) mem_alloc(nodesize);
-		}
-		if (sp == NULL) {
-			(void) fprintf(stderr, "xdr_bytes: out of memory\n");
-			return (FALSE);
-		}
-		/* fall into ... */
-
-	case XDR_ENCODE:
-		return (xdr_opaque(xdrs, sp, nodesize));
-
-	case XDR_FREE:
-		if (sp != NULL) {
-			mem_free(sp, nodesize);
-			*cpp = NULL;
-		}
-		return (TRUE);
-	}
-	return (FALSE);
-}
-
-/*
- * Implemented here due to commonality of the object.
- */
-bool_t xdr_netobj(xdrs, np)
-XDR *xdrs;
-struct netobj *np;
-{
-
-	return (xdr_bytes(xdrs, &np->n_bytes, &np->n_len, MAX_NETOBJ_SZ));
-}
-
-/*
- * XDR a descriminated union
- * Support routine for discriminated unions.
- * You create an array of xdrdiscrim structures, terminated with
- * an entry with a null procedure pointer.  The routine gets
- * the discriminant value and then searches the array of xdrdiscrims
- * looking for that value.  It calls the procedure given in the xdrdiscrim
- * to handle the discriminant.  If there is no specific routine a default
- * routine may be called.
- * If there is no specific or default routine an error is returned.
- */
-bool_t xdr_union(XDR* xdrs, enum_t* dscmp, char* unp, const struct xdr_discrim* choices, xdrproc_t dfault)
-{
-	register enum_t dscm;
-
-	/*
-	 * we deal with the discriminator;  it's an enum
-	 */
-	if (!xdr_enum(xdrs, dscmp)) {
-		return (FALSE);
-	}
-	dscm = *dscmp;
-
-	/*
-	 * search choices for a value that matches the discriminator.
-	 * if we find one, execute the xdr routine for that value.
-	 */
-	for (; choices->proc != NULL_xdrproc_t; choices++) {
-		if (choices->value == dscm)
-			return ((*(choices->proc)) (xdrs, unp, LASTUNSIGNED));
-	}
-
-	/*
-	 * no match - execute the default xdr routine if there is one
-	 */
-	return ((dfault == NULL_xdrproc_t) ? FALSE :
-			(*dfault) (xdrs, unp, LASTUNSIGNED));
-}
-
-
-/*
- * Non-portable xdr primitives.
- * Care should be taken when moving these routines to new architectures.
- */
-
-
-/*
- * XDR null terminated ASCII strings
- * xdr_string deals with "C strings" - arrays of bytes that are
- * terminated by a NULL character.  The parameter cpp references a
- * pointer to storage; If the pointer is null, then the necessary
- * storage is allocated.  The last parameter is the max allowed length
- * of the string as specified by a protocol.
- */
-bool_t xdr_string(xdrs, cpp, maxsize)
-register XDR *xdrs;
-char **cpp;
-u_int maxsize;
-{
-	register char *sp = *cpp;	/* sp is the actual string pointer */
-	u_int size;
-	u_int nodesize;
-
-	/*
-	 * first deal with the length since xdr strings are counted-strings
-	 */
-	switch (xdrs->x_op) {
-	case XDR_FREE:
-		if (sp == NULL) {
-			return (TRUE);		/* already free */
-		}
-		/* fall through... */
-	case XDR_ENCODE:
-		size = strlen(sp);
-		break;
-	}
-	if (!xdr_u_int(xdrs, &size)) {
-		return (FALSE);
-	}
-	if (size > maxsize) {
-		return (FALSE);
-	}
-	nodesize = size + 1;
-
-	/*
-	 * now deal with the actual bytes
-	 */
-	switch (xdrs->x_op) {
-
-	case XDR_DECODE:
-		if (nodesize == 0) {
-			return (TRUE);
-		}
-		if (sp == NULL)
-			*cpp = sp = (char *) mem_alloc(nodesize);
-		if (sp == NULL) {
-			(void) fprintf(stderr, "xdr_string: out of memory\n");
-			return (FALSE);
-		}
-		sp[size] = 0;
-		/* fall into ... */
-
-	case XDR_ENCODE:
-		return (xdr_opaque(xdrs, sp, size));
-
-	case XDR_FREE:
-		mem_free(sp, nodesize);
-		*cpp = NULL;
-		return (TRUE);
-	}
-	return (FALSE);
-}
-
-/* 
- * Wrapper for xdr_string that can be called directly from 
- * routines like clnt_call
- */
-bool_t xdr_wrapstring(xdrs, cpp)
-XDR *xdrs;
-char **cpp;
-{
-	if (xdr_string(xdrs, cpp, LASTUNSIGNED)) {
-		return (TRUE);
-	}
-	return (FALSE);
-}
diff --git a/mdk-stage1/dietlibc/librpc/xdr_array.c b/mdk-stage1/dietlibc/librpc/xdr_array.c
deleted file mode 100644
index f8ae12b19..000000000
--- a/mdk-stage1/dietlibc/librpc/xdr_array.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/* @(#)xdr_array.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)xdr_array.c 1.10 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * xdr_array.c, Generic XDR routines impelmentation.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * These are the "non-trivial" xdr primitives used to serialize and de-serialize
- * arrays.  See xdr.h for more info on the interface to xdr.
- */
-
-#include <stdio.h>
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <string.h>
-
-#define LASTUNSIGNED	((u_int)0-1)
-
-
-/*
- * XDR an array of arbitrary elements
- * *addrp is a pointer to the array, *sizep is the number of elements.
- * If addrp is NULL (*sizep * elsize) bytes are allocated.
- * elsize is the size (in bytes) of each element, and elproc is the
- * xdr procedure to call to handle each element of the array.
- */
-bool_t xdr_array(xdrs, addrp, sizep, maxsize, elsize, elproc)
-register XDR *xdrs;
-caddr_t *addrp;					/* array pointer */
-u_int *sizep;					/* number of elements */
-u_int maxsize;					/* max numberof elements */
-u_int elsize;					/* size in bytes of each element */
-xdrproc_t elproc;				/* xdr routine to handle each element */
-{
-	register u_int i;
-	register caddr_t target = *addrp;
-	register u_int c;			/* the actual element count */
-	register bool_t stat = TRUE;
-	register u_int nodesize;
-
-	/* like strings, arrays are really counted arrays */
-	if (!xdr_u_int(xdrs, sizep)) {
-		return (FALSE);
-	}
-	c = *sizep;
-	if ((c > maxsize) && (xdrs->x_op != XDR_FREE)) {
-		return (FALSE);
-	}
-	nodesize = c * elsize;
-
-	/*
-	 * if we are deserializing, we may need to allocate an array.
-	 * We also save time by checking for a null array if we are freeing.
-	 */
-	if (target == NULL)
-		switch (xdrs->x_op) {
-		case XDR_DECODE:
-			if (c == 0)
-				return (TRUE);
-			*addrp = target = mem_alloc(nodesize);
-			if (target == NULL) {
-				(void) fprintf(stderr, "xdr_array: out of memory\n");
-				return (FALSE);
-			}
-			bzero(target, nodesize);
-			break;
-
-		case XDR_FREE:
-			return (TRUE);
-		}
-
-	/*
-	 * now we xdr each element of array
-	 */
-	for (i = 0; (i < c) && stat; i++) {
-		stat = (*elproc) (xdrs, target, LASTUNSIGNED);
-		target += elsize;
-	}
-
-	/*
-	 * the array may need freeing
-	 */
-	if (xdrs->x_op == XDR_FREE) {
-		mem_free(*addrp, nodesize);
-		*addrp = NULL;
-	}
-	return (stat);
-}
-
-/*
- * xdr_vector():
- *
- * XDR a fixed length array. Unlike variable-length arrays,
- * the storage of fixed length arrays is static and unfreeable.
- * > basep: base of the array
- * > size: size of the array
- * > elemsize: size of each element
- * > xdr_elem: routine to XDR each element
- */
-bool_t xdr_vector(xdrs, basep, nelem, elemsize, xdr_elem)
-register XDR *xdrs;
-register char *basep;
-register u_int nelem;
-register u_int elemsize;
-register xdrproc_t xdr_elem;
-{
-	register u_int i;
-	register char *elptr;
-
-	elptr = basep;
-	for (i = 0; i < nelem; i++) {
-		if (!(*xdr_elem) (xdrs, elptr, LASTUNSIGNED)) {
-			return (FALSE);
-		}
-		elptr += elemsize;
-	}
-	return (TRUE);
-}
diff --git a/mdk-stage1/dietlibc/librpc/xdr_float.c b/mdk-stage1/dietlibc/librpc/xdr_float.c
deleted file mode 100644
index f8eb5e99c..000000000
--- a/mdk-stage1/dietlibc/librpc/xdr_float.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/* @(#)xdr_float.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)xdr_float.c 1.12 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * xdr_float.c, Generic XDR routines impelmentation.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * These are the "floating point" xdr routines used to (de)serialize
- * most common data items.  See xdr.h for more info on the interface to
- * xdr.
- */
-
-#include <stdio.h>
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-
-/*
- * NB: Not portable.
- * This routine works on Suns (Sky / 68000's) and Vaxen.
- */
-
-#ifdef __linux__
-/* cheat big time */
-#define sparc
-#endif
-
-#ifdef vax
-
-/* What IEEE single precision floating point looks like on a Vax */
-struct ieee_single {
-	unsigned int mantissa:23;
-	unsigned int exp:8;
-	unsigned int sign:1;
-};
-
-/* Vax single precision floating point */
-struct vax_single {
-	unsigned int mantissa1:7;
-	unsigned int exp:8;
-	unsigned int sign:1;
-	unsigned int mantissa2:16;
-};
-
-#define VAX_SNG_BIAS	0x81
-#define IEEE_SNG_BIAS	0x7f
-
-static struct sgl_limits {
-	struct vax_single s;
-	struct ieee_single ieee;
-} sgl_limits[2] = {
-	{ {
-	0x7f, 0xff, 0x0, 0xffff},	/* Max Vax */
-	{
-	0x0, 0xff, 0x0}},			/* Max IEEE */
-	{ {
-	0x0, 0x0, 0x0, 0x0},		/* Min Vax */
-	{
-	0x0, 0x0, 0x0}}				/* Min IEEE */
-};
-#endif							/* vax */
-
-bool_t xdr_float(xdrs, fp)
-register XDR *xdrs;
-register float *fp;
-{
-#if !defined(mc68000) && !defined(sparc)
-	struct ieee_single is;
-	struct vax_single vs, *vsp;
-	struct sgl_limits *lim;
-	int i;
-#endif
-	switch (xdrs->x_op) {
-
-	case XDR_ENCODE:
-#if defined(mc68000) || defined(sparc)
-		return (XDR_PUTLONG(xdrs, (long *) fp));
-#else
-		vs = *((struct vax_single *) fp);
-		for (i = 0, lim = sgl_limits;
-
-			 i < sizeof(sgl_limits) / sizeof(struct sgl_limits);
-			 i++, lim++) {
-			if ((vs.mantissa2 == lim->s.mantissa2) &&
-				(vs.exp == lim->s.exp) &&
-				(vs.mantissa1 == lim->s.mantissa1)) {
-				is = lim->ieee;
-				goto shipit;
-			}
-		}
-		is.exp = vs.exp - VAX_SNG_BIAS + IEEE_SNG_BIAS;
-		is.mantissa = (vs.mantissa1 << 16) | vs.mantissa2;
-	  shipit:
-		is.sign = vs.sign;
-		return (XDR_PUTLONG(xdrs, (long *) &is));
-#endif
-
-	case XDR_DECODE:
-#if defined(mc68000) || defined(sparc)
-		return (XDR_GETLONG(xdrs, (long *) fp));
-#else
-		vsp = (struct vax_single *) fp;
-		if (!XDR_GETLONG(xdrs, (long *) &is))
-			return (FALSE);
-		for (i = 0, lim = sgl_limits;
-
-			 i < sizeof(sgl_limits) / sizeof(struct sgl_limits);
-			 i++, lim++) {
-			if ((is.exp == lim->ieee.exp) &&
-				(is.mantissa == lim->ieee.mantissa)) {
-				*vsp = lim->s;
-				goto doneit;
-			}
-		}
-		vsp->exp = is.exp - IEEE_SNG_BIAS + VAX_SNG_BIAS;
-		vsp->mantissa2 = is.mantissa;
-		vsp->mantissa1 = (is.mantissa >> 16);
-	  doneit:
-		vsp->sign = is.sign;
-		return (TRUE);
-#endif
-
-	case XDR_FREE:
-		return (TRUE);
-	}
-	return (FALSE);
-}
-
-/*
- * This routine works on Suns (Sky / 68000's) and Vaxen.
- */
-
-#ifdef vax
-/* What IEEE double precision floating point looks like on a Vax */
-struct ieee_double {
-	unsigned int mantissa1:20;
-	unsigned int exp:11;
-	unsigned int sign:1;
-	unsigned int mantissa2:32;
-};
-
-/* Vax double precision floating point */
-struct vax_double {
-	unsigned int mantissa1:7;
-	unsigned int exp:8;
-	unsigned int sign:1;
-	unsigned int mantissa2:16;
-	unsigned int mantissa3:16;
-	unsigned int mantissa4:16;
-};
-
-#define VAX_DBL_BIAS	0x81
-#define IEEE_DBL_BIAS	0x3ff
-#define MASK(nbits)	((1 << nbits) - 1)
-
-static struct dbl_limits {
-	struct vax_double d;
-	struct ieee_double ieee;
-} dbl_limits[2] = {
-	{ {
-	0x7f, 0xff, 0x0, 0xffff, 0xffff, 0xffff},	/* Max Vax */
-	{
-	0x0, 0x7ff, 0x0, 0x0}},		/* Max IEEE */
-	{ {
-	0x0, 0x0, 0x0, 0x0, 0x0, 0x0},	/* Min Vax */
-	{
-	0x0, 0x0, 0x0, 0x0}}		/* Min IEEE */
-};
-
-#endif							/* vax */
-
-
-bool_t xdr_double(xdrs, dp)
-register XDR *xdrs;
-double *dp;
-{
-	register long *lp;
-
-#if !defined(mc68000) && !defined(sparc)
-	struct ieee_double id;
-	struct vax_double vd;
-	register struct dbl_limits *lim;
-	int i;
-#endif
-
-	switch (xdrs->x_op) {
-
-	case XDR_ENCODE:
-#if defined(mc68000) || defined(sparc)
-		lp = (long *) dp;
-#else
-		vd = *((struct vax_double *) dp);
-		for (i = 0, lim = dbl_limits;
-
-			 i < sizeof(dbl_limits) / sizeof(struct dbl_limits);
-			 i++, lim++) {
-			if ((vd.mantissa4 == lim->d.mantissa4) &&
-				(vd.mantissa3 == lim->d.mantissa3) &&
-				(vd.mantissa2 == lim->d.mantissa2) &&
-				(vd.mantissa1 == lim->d.mantissa1) &&
-				(vd.exp == lim->d.exp)) {
-				id = lim->ieee;
-				goto shipit;
-			}
-		}
-		id.exp = vd.exp - VAX_DBL_BIAS + IEEE_DBL_BIAS;
-		id.mantissa1 = (vd.mantissa1 << 13) | (vd.mantissa2 >> 3);
-		id.mantissa2 = ((vd.mantissa2 & MASK(3)) << 29) |
-			(vd.mantissa3 << 13) | ((vd.mantissa4 >> 3) & MASK(13));
-	  shipit:
-		id.sign = vd.sign;
-		lp = (long *) &id;
-#endif
-		return (XDR_PUTLONG(xdrs, lp++) && XDR_PUTLONG(xdrs, lp));
-
-	case XDR_DECODE:
-#if defined(mc68000) || defined(sparc)
-		lp = (long *) dp;
-		return (XDR_GETLONG(xdrs, lp++) && XDR_GETLONG(xdrs, lp));
-#else
-		lp = (long *) &id;
-		if (!XDR_GETLONG(xdrs, lp++) || !XDR_GETLONG(xdrs, lp))
-			return (FALSE);
-		for (i = 0, lim = dbl_limits;
-
-			 i < sizeof(dbl_limits) / sizeof(struct dbl_limits);
-			 i++, lim++) {
-			if ((id.mantissa2 == lim->ieee.mantissa2) &&
-				(id.mantissa1 == lim->ieee.mantissa1) &&
-				(id.exp == lim->ieee.exp)) {
-				vd = lim->d;
-				goto doneit;
-			}
-		}
-		vd.exp = id.exp - IEEE_DBL_BIAS + VAX_DBL_BIAS;
-		vd.mantissa1 = (id.mantissa1 >> 13);
-		vd.mantissa2 = ((id.mantissa1 & MASK(13)) << 3) |
-			(id.mantissa2 >> 29);
-		vd.mantissa3 = (id.mantissa2 >> 13);
-		vd.mantissa4 = (id.mantissa2 << 3);
-	  doneit:
-		vd.sign = id.sign;
-		*dp = *((double *) &vd);
-		return (TRUE);
-#endif
-
-	case XDR_FREE:
-		return (TRUE);
-	}
-	return (FALSE);
-}
diff --git a/mdk-stage1/dietlibc/librpc/xdr_mem.c b/mdk-stage1/dietlibc/librpc/xdr_mem.c
deleted file mode 100644
index 755f6abf1..000000000
--- a/mdk-stage1/dietlibc/librpc/xdr_mem.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/* @(#)xdr_mem.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)xdr_mem.c 1.19 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * xdr_mem.h, XDR implementation using memory buffers.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * If you have some data to be interpreted as external data representation
- * or to be converted to external data representation in a memory buffer,
- * then this is the package for you.
- *
- */
-
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <netinet/in.h>
-#include <string.h>
-
-static bool_t xdrmem_getlong();
-static bool_t xdrmem_putlong();
-static bool_t xdrmem_getbytes();
-static bool_t xdrmem_putbytes();
-static u_int xdrmem_getpos();
-static bool_t xdrmem_setpos();
-static int32_t *xdrmem_inline();
-static void xdrmem_destroy();
-
-static struct xdr_ops xdrmem_ops = {
-	xdrmem_getlong,
-	xdrmem_putlong,
-	xdrmem_getbytes,
-	xdrmem_putbytes,
-	xdrmem_getpos,
-	xdrmem_setpos,
-	xdrmem_inline,
-	xdrmem_destroy
-};
-
-/*
- * The procedure xdrmem_create initializes a stream descriptor for a
- * memory buffer.  
- */
-void xdrmem_create(xdrs, addr, size, op)
-register XDR *xdrs;
-caddr_t addr;
-u_int size;
-enum xdr_op op;
-{
-
-	xdrs->x_op = op;
-	xdrs->x_ops = &xdrmem_ops;
-	xdrs->x_private = xdrs->x_base = addr;
-	xdrs->x_handy = size;
-}
-
-static void xdrmem_destroy( /*xdrs */ )
-	/*XDR *xdrs; */
-{
-}
-
-static bool_t xdrmem_getlong(xdrs, lp)
-register XDR *xdrs;
-long *lp;
-{
-
-	if ((xdrs->x_handy -= sizeof(long)) < 0)
-		return (FALSE);
-
-	*lp = (long) ntohl((u_long) (*((long *) (xdrs->x_private))));
-	xdrs->x_private += sizeof(long);
-
-	return (TRUE);
-}
-
-static bool_t xdrmem_putlong(xdrs, lp)
-register XDR *xdrs;
-long *lp;
-{
-
-	if ((xdrs->x_handy -= sizeof(long)) < 0)
-		return (FALSE);
-
-	*(long *) xdrs->x_private = (long) htonl((u_long) (*lp));
-	xdrs->x_private += sizeof(long);
-
-	return (TRUE);
-}
-
-static bool_t xdrmem_getbytes(xdrs, addr, len)
-register XDR *xdrs;
-caddr_t addr;
-register u_int len;
-{
-
-	if ((xdrs->x_handy -= len) < 0)
-		return (FALSE);
-	bcopy(xdrs->x_private, addr, len);
-	xdrs->x_private += len;
-	return (TRUE);
-}
-
-static bool_t xdrmem_putbytes(xdrs, addr, len)
-register XDR *xdrs;
-caddr_t addr;
-register u_int len;
-{
-
-	if ((xdrs->x_handy -= len) < 0)
-		return (FALSE);
-	bcopy(addr, xdrs->x_private, len);
-	xdrs->x_private += len;
-	return (TRUE);
-}
-
-static u_int xdrmem_getpos(xdrs)
-register XDR *xdrs;
-{
-
-	return ((u_int) xdrs->x_private - (u_int) xdrs->x_base);
-}
-
-static bool_t xdrmem_setpos(xdrs, pos)
-register XDR *xdrs;
-u_int pos;
-{
-	register caddr_t newaddr = xdrs->x_base + pos;
-	register caddr_t lastaddr = xdrs->x_private + xdrs->x_handy;
-
-	if ((long) newaddr > (long) lastaddr)
-		return (FALSE);
-	xdrs->x_private = newaddr;
-	xdrs->x_handy = (int) lastaddr - (int) newaddr;
-	return (TRUE);
-}
-
-static int32_t *xdrmem_inline(xdrs, len)
-register XDR *xdrs;
-int len;
-{
-	int32_t *buf = 0;
-
-	if (xdrs->x_handy >= len) {
-		xdrs->x_handy -= len;
-		buf = (int32_t *) xdrs->x_private;
-		xdrs->x_private += len;
-	}
-	return (buf);
-}
diff --git a/mdk-stage1/dietlibc/librpc/xdr_rec.c b/mdk-stage1/dietlibc/librpc/xdr_rec.c
deleted file mode 100644
index 83e800f5e..000000000
--- a/mdk-stage1/dietlibc/librpc/xdr_rec.c
+++ /dev/null
@@ -1,573 +0,0 @@
-/* @(#)xdr_rec.c	2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)xdr_rec.c 1.21 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * xdr_rec.c, Implements TCP/IP based XDR streams with a "record marking"
- * layer above tcp (for rpc's use).
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * These routines interface XDRSTREAMS to a tcp/ip connection.
- * There is a record marking layer between the xdr stream
- * and the tcp transport level.  A record is composed on one or more
- * record fragments.  A record fragment is a thirty-two bit header followed
- * by n bytes of data, where n is contained in the header.  The header
- * is represented as a htonl(u_long).  Thegh order bit encodes
- * whether or not the fragment is the last fragment of the record
- * (1 => fragment is last, 0 => more fragments to follow. 
- * The other 31 bits encode the byte length of the fragment.
- */
-
-#include <stdio.h>
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <netinet/in.h>
-#include <string.h>
-
-extern long lseek();
-
-static u_int fix_buf_size();
-
-static bool_t xdrrec_getlong();
-static bool_t xdrrec_putlong();
-static bool_t xdrrec_getbytes();
-static bool_t xdrrec_putbytes();
-static u_int xdrrec_getpos();
-static bool_t xdrrec_setpos();
-static int32_t *xdrrec_inline();
-static void xdrrec_destroy();
-
-static struct xdr_ops xdrrec_ops = {
-	xdrrec_getlong,
-	xdrrec_putlong,
-	xdrrec_getbytes,
-	xdrrec_putbytes,
-	xdrrec_getpos,
-	xdrrec_setpos,
-	xdrrec_inline,
-	xdrrec_destroy
-};
-
-/*
- * A record is composed of one or more record fragments.
- * A record fragment is a two-byte header followed by zero to
- * 2**32-1 bytes.  The header is treated as a long unsigned and is
- * encode/decoded to the network via htonl/ntohl.  The low order 31 bits
- * are a byte count of the fragment.  The highest order bit is a boolean:
- * 1 => this fragment is the last fragment of the record,
- * 0 => this fragment is followed by more fragment(s).
- *
- * The fragment/record machinery is not general;  it is constructed to
- * meet the needs of xdr and rpc based on tcp.
- */
-
-#define LAST_FRAG ((u_long)(1 << 31))
-
-typedef struct rec_strm {
-	caddr_t tcp_handle;
-	caddr_t the_buffer;
-	/*
-	 * out-goung bits
-	 */
-	int (*writeit) ();
-	caddr_t out_base;			/* output buffer (points to frag header) */
-	caddr_t out_finger;			/* next output position */
-	caddr_t out_boundry;		/* data cannot up to this address */
-	u_long *frag_header;		/* beginning of curren fragment */
-	bool_t frag_sent;			/* true if buffer sent in middle of record */
-	/*
-	 * in-coming bits
-	 */
-	int (*readit) ();
-	u_long in_size;				/* fixed size of the input buffer */
-	caddr_t in_base;
-	caddr_t in_finger;			/* location of next byte to be had */
-	caddr_t in_boundry;			/* can read up to this location */
-	long fbtbc;					/* fragment bytes to be consumed */
-	bool_t last_frag;
-	u_int sendsize;
-	u_int recvsize;
-} RECSTREAM;
-
-
-/*
- * Create an xdr handle for xdrrec
- * xdrrec_create fills in xdrs.  Sendsize and recvsize are
- * send and recv buffer sizes (0 => use default).
- * tcp_handle is an opaque handle that is passed as the first parameter to
- * the procedures readit and writeit.  Readit and writeit are read and
- * write respectively.   They are like the system
- * calls expect that they take an opaque handle rather than an fd.
- */
-void xdrrec_create(xdrs, sendsize, recvsize, tcp_handle, readit, writeit)
-register XDR *xdrs;
-register u_int sendsize;
-register u_int recvsize;
-caddr_t tcp_handle;
-int (*readit) ();				/* like read, but pass it a tcp_handle, not sock */
-int (*writeit) ();				/* like write, but pass it a tcp_handle, not sock */
-{
-	register RECSTREAM *rstrm = (RECSTREAM *) mem_alloc(sizeof(RECSTREAM));
-
-	if (rstrm == NULL) {
-		(void) fprintf(stderr, "xdrrec_create: out of memory\n");
-		/* 
-		 *  This is bad.  Should rework xdrrec_create to 
-		 *  return a handle, and in this case return NULL
-		 */
-		return;
-	}
-	/*
-	 * adjust sizes and allocate buffer quad byte aligned
-	 */
-	rstrm->sendsize = sendsize = fix_buf_size(sendsize);
-	rstrm->recvsize = recvsize = fix_buf_size(recvsize);
-	rstrm->the_buffer =
-		mem_alloc(sendsize + recvsize + BYTES_PER_XDR_UNIT);
-	if (rstrm->the_buffer == NULL) {
-		(void) fprintf(stderr, "xdrrec_create: out of memory\n");
-		return;
-	}
-	for (rstrm->out_base = rstrm->the_buffer;
-		 (u_int) rstrm->out_base % BYTES_PER_XDR_UNIT != 0;
-		 rstrm->out_base++);
-	rstrm->in_base = rstrm->out_base + sendsize;
-	/*
-	 * now the rest ...
-	 */
-	xdrs->x_ops = &xdrrec_ops;
-	xdrs->x_private = (caddr_t) rstrm;
-	rstrm->tcp_handle = tcp_handle;
-	rstrm->readit = readit;
-	rstrm->writeit = writeit;
-	rstrm->out_finger = rstrm->out_boundry = rstrm->out_base;
-	rstrm->frag_header = (u_long *) rstrm->out_base;
-	rstrm->out_finger += sizeof(u_long);
-	rstrm->out_boundry += sendsize;
-	rstrm->frag_sent = FALSE;
-	rstrm->in_size = recvsize;
-	rstrm->in_boundry = rstrm->in_base;
-	rstrm->in_finger = (rstrm->in_boundry += recvsize);
-	rstrm->fbtbc = 0;
-	rstrm->last_frag = TRUE;
-}
-
-
-/*
- * The reoutines defined below are the xdr ops which will go into the
- * xdr handle filled in by xdrrec_create.
- */
-
-static bool_t xdrrec_getlong(xdrs, lp)
-XDR *xdrs;
-long *lp;
-{
-	register RECSTREAM *rstrm = (RECSTREAM *) (xdrs->x_private);
-	register long *buflp = (long *) (rstrm->in_finger);
-	long mylong;
-
-	/* first try the inline, fast case */
-	if ((rstrm->fbtbc >= sizeof(long)) &&
-		(((int) rstrm->in_boundry - (int) buflp) >= sizeof(long))) {
-		*lp = (long) ntohl((u_long) (*buflp));
-		rstrm->fbtbc -= sizeof(long);
-		rstrm->in_finger += sizeof(long);
-	} else {
-		if (!xdrrec_getbytes(xdrs, (caddr_t) & mylong, sizeof(long)))
-			return (FALSE);
-
-		*lp = (long) ntohl((u_long) mylong);
-	}
-	return (TRUE);
-}
-
-/*
- * Internal useful routines
- */
-static bool_t flush_out(RECSTREAM* rstrm, bool_t eor)
-{
-	register u_long eormask = (eor == TRUE) ? LAST_FRAG : 0;
-	register u_long len = (u_long) (rstrm->out_finger) -
-		(u_long) (rstrm->frag_header) - sizeof(u_long);
-
-	*(rstrm->frag_header) = htonl(len | eormask);
-	len = (u_long) (rstrm->out_finger) - (u_long) (rstrm->out_base);
-	if ((*(rstrm->writeit)) (rstrm->tcp_handle, rstrm->out_base, (int) len)
-		!= (int) len)
-		return (FALSE);
-	rstrm->frag_header = (u_long *) rstrm->out_base;
-	rstrm->out_finger = (caddr_t) rstrm->out_base + sizeof(u_long);
-	return (TRUE);
-}
-
-static bool_t
-/* knows nothing about records!  Only about input buffers */
-fill_input_buf(rstrm)
-register RECSTREAM *rstrm;
-{
-	register caddr_t where;
-	u_int i;
-	register int len;
-
-	where = rstrm->in_base;
-	i = (u_int) rstrm->in_boundry % BYTES_PER_XDR_UNIT;
-	where += i;
-	len = rstrm->in_size - i;
-	if ((len = (*(rstrm->readit)) (rstrm->tcp_handle, where, len)) == -1)
-		return (FALSE);
-	rstrm->in_finger = where;
-	where += len;
-	rstrm->in_boundry = where;
-	return (TRUE);
-}
-
-static bool_t
-/* knows nothing about records!  Only about input buffers */
-get_input_bytes(rstrm, addr, len)
-register RECSTREAM *rstrm;
-register caddr_t addr;
-register int len;
-{
-	register int current;
-
-	while (len > 0) {
-		current = (int) rstrm->in_boundry - (int) rstrm->in_finger;
-		if (current == 0) {
-			if (!fill_input_buf(rstrm))
-				return (FALSE);
-			continue;
-		}
-		current = (len < current) ? len : current;
-		bcopy(rstrm->in_finger, addr, current);
-		rstrm->in_finger += current;
-		addr += current;
-		len -= current;
-	}
-	return (TRUE);
-}
-
-static bool_t
-/* next two bytes of the input stream are treated as a header */
-set_input_fragment(rstrm)
-register RECSTREAM *rstrm;
-{
-	u_long header;
-
-	if (!get_input_bytes(rstrm, (caddr_t) & header, sizeof(header)))
-		return (FALSE);
-	header = (long) ntohl(header);
-	rstrm->last_frag = ((header & LAST_FRAG) == 0) ? FALSE : TRUE;
-	rstrm->fbtbc = header & (~LAST_FRAG);
-	return (TRUE);
-}
-
-static bool_t
-/* consumes input bytes; knows nothing about records! */
-skip_input_bytes(rstrm, cnt)
-register RECSTREAM *rstrm;
-long cnt;
-{
-	register int current;
-
-	while (cnt > 0) {
-		current = (int) rstrm->in_boundry - (int) rstrm->in_finger;
-		if (current == 0) {
-			if (!fill_input_buf(rstrm))
-				return (FALSE);
-			continue;
-		}
-		current = (cnt < current) ? cnt : current;
-		rstrm->in_finger += current;
-		cnt -= current;
-	}
-	return (TRUE);
-}
-
-static u_int fix_buf_size(s)
-register u_int s;
-{
-
-	if (s < 100)
-		s = 4000;
-	return (RNDUP(s));
-}
-static bool_t xdrrec_putlong(xdrs, lp)
-XDR *xdrs;
-long *lp;
-{
-	register RECSTREAM *rstrm = (RECSTREAM *) (xdrs->x_private);
-	register long *dest_lp = ((long *) (rstrm->out_finger));
-
-	if ((rstrm->out_finger += sizeof(long)) > rstrm->out_boundry) {
-		/*
-		 * this case should almost never happen so the code is
-		 * inefficient
-		 */
-		rstrm->out_finger -= sizeof(long);
-
-		rstrm->frag_sent = TRUE;
-		if (!flush_out(rstrm, FALSE))
-			return (FALSE);
-		dest_lp = ((long *) (rstrm->out_finger));
-		rstrm->out_finger += sizeof(long);
-	}
-	*dest_lp = (long) htonl((u_long) (*lp));
-	return (TRUE);
-}
-
-static bool_t
-/* must manage buffers, fragments, and records */
-xdrrec_getbytes(xdrs, addr, len)
-XDR *xdrs;
-register caddr_t addr;
-register u_int len;
-{
-	register RECSTREAM *rstrm = (RECSTREAM *) (xdrs->x_private);
-	register int current;
-
-	while (len > 0) {
-		current = rstrm->fbtbc;
-		if (current == 0) {
-			if (rstrm->last_frag)
-				return (FALSE);
-			if (!set_input_fragment(rstrm))
-				return (FALSE);
-			continue;
-		}
-		current = (len < current) ? len : current;
-		if (!get_input_bytes(rstrm, addr, current))
-			return (FALSE);
-		addr += current;
-		rstrm->fbtbc -= current;
-		len -= current;
-	}
-	return (TRUE);
-}
-
-static bool_t xdrrec_putbytes(xdrs, addr, len)
-XDR *xdrs;
-register caddr_t addr;
-register u_int len;
-{
-	register RECSTREAM *rstrm = (RECSTREAM *) (xdrs->x_private);
-	register int current;
-
-	while (len > 0) {
-		current = (u_int) rstrm->out_boundry - (u_int) rstrm->out_finger;
-		current = (len < current) ? len : current;
-		bcopy(addr, rstrm->out_finger, current);
-		rstrm->out_finger += current;
-		addr += current;
-		len -= current;
-		if (rstrm->out_finger == rstrm->out_boundry) {
-			rstrm->frag_sent = TRUE;
-			if (!flush_out(rstrm, FALSE))
-				return (FALSE);
-		}
-	}
-	return (TRUE);
-}
-
-static u_int xdrrec_getpos(xdrs)
-register XDR *xdrs;
-{
-	register RECSTREAM *rstrm = (RECSTREAM *) xdrs->x_private;
-	register long pos;
-
-	pos = lseek((int) rstrm->tcp_handle, (long) 0, 1);
-	if (pos != -1)
-		switch (xdrs->x_op) {
-
-		case XDR_ENCODE:
-			pos += rstrm->out_finger - rstrm->out_base;
-			break;
-
-		case XDR_DECODE:
-			pos -= rstrm->in_boundry - rstrm->in_finger;
-			break;
-
-		default:
-			pos = (u_int) - 1;
-			break;
-		}
-	return ((u_int) pos);
-}
-
-static bool_t xdrrec_setpos(xdrs, pos)
-register XDR *xdrs;
-u_int pos;
-{
-	register RECSTREAM *rstrm = (RECSTREAM *) xdrs->x_private;
-	u_int currpos = xdrrec_getpos(xdrs);
-	int delta = currpos - pos;
-	caddr_t newpos;
-
-	if ((int) currpos != -1)
-		switch (xdrs->x_op) {
-
-		case XDR_ENCODE:
-			newpos = rstrm->out_finger - delta;
-			if ((newpos > (caddr_t) (rstrm->frag_header)) &&
-				(newpos < rstrm->out_boundry)) {
-				rstrm->out_finger = newpos;
-				return (TRUE);
-			}
-			break;
-
-		case XDR_DECODE:
-			newpos = rstrm->in_finger - delta;
-			if ((delta < (int) (rstrm->fbtbc)) &&
-				(newpos <= rstrm->in_boundry) &&
-				(newpos >= rstrm->in_base)) {
-				rstrm->in_finger = newpos;
-				rstrm->fbtbc -= delta;
-				return (TRUE);
-			}
-			break;
-		}
-	return (FALSE);
-}
-
-static int32_t *xdrrec_inline(xdrs, len)
-register XDR *xdrs;
-int len;
-{
-	register RECSTREAM *rstrm = (RECSTREAM *) xdrs->x_private;
-	int32_t *buf = NULL;
-
-	switch (xdrs->x_op) {
-
-	case XDR_ENCODE:
-		if ((rstrm->out_finger + len) <= rstrm->out_boundry) {
-			buf = (int32_t *) rstrm->out_finger;
-			rstrm->out_finger += len;
-		}
-		break;
-
-	case XDR_DECODE:
-		if ((len <= rstrm->fbtbc) &&
-			((rstrm->in_finger + len) <= rstrm->in_boundry)) {
-			buf = (int32_t *) rstrm->in_finger;
-			rstrm->fbtbc -= len;
-			rstrm->in_finger += len;
-		}
-		break;
-	}
-	return (buf);
-}
-
-static void xdrrec_destroy(xdrs)
-register XDR *xdrs;
-{
-	register RECSTREAM *rstrm = (RECSTREAM *) xdrs->x_private;
-
-	mem_free(rstrm->the_buffer,
-			 rstrm->sendsize + rstrm->recvsize + BYTES_PER_XDR_UNIT);
-	mem_free((caddr_t) rstrm, sizeof(RECSTREAM));
-}
-
-
-/*
- * Exported routines to manage xdr records
- */
-
-/*
- * Before reading (deserializing from the stream, one should always call
- * this procedure to guarantee proper record alignment.
- */
-bool_t xdrrec_skiprecord(xdrs)
-XDR *xdrs;
-{
-	register RECSTREAM *rstrm = (RECSTREAM *) (xdrs->x_private);
-
-	while (rstrm->fbtbc > 0 || (!rstrm->last_frag)) {
-		if (!skip_input_bytes(rstrm, rstrm->fbtbc))
-			return (FALSE);
-		rstrm->fbtbc = 0;
-		if ((!rstrm->last_frag) && (!set_input_fragment(rstrm)))
-			return (FALSE);
-	}
-	rstrm->last_frag = FALSE;
-	return (TRUE);
-}
-
-/*
- * Look ahead fuction.
- * Returns TRUE iff there is no more input in the buffer 
- * after consuming the rest of the current record.
- */
-bool_t xdrrec_eof(xdrs)
-XDR *xdrs;
-{
-	register RECSTREAM *rstrm = (RECSTREAM *) (xdrs->x_private);
-
-	while (rstrm->fbtbc > 0 || (!rstrm->last_frag)) {
-		if (!skip_input_bytes(rstrm, rstrm->fbtbc))
-			return (TRUE);
-		rstrm->fbtbc = 0;
-		if ((!rstrm->last_frag) && (!set_input_fragment(rstrm)))
-			return (TRUE);
-	}
-	if (rstrm->in_finger == rstrm->in_boundry)
-		return (TRUE);
-	return (FALSE);
-}
-
-/*
- * The client must tell the package when an end-of-record has occurred.
- * The second paraemters tells whether the record should be flushed to the
- * (output) tcp stream.  (This let's the package support batched or
- * pipelined procedure calls.)  TRUE => immmediate flush to tcp connection.
- */
-bool_t xdrrec_endofrecord(xdrs, sendnow)
-XDR *xdrs;
-bool_t sendnow;
-{
-	register RECSTREAM *rstrm = (RECSTREAM *) (xdrs->x_private);
-	register u_long len;		/* fragment length */
-
-	if (sendnow || rstrm->frag_sent ||
-		((u_long) rstrm->out_finger + sizeof(u_long) >=
-		 (u_long) rstrm->out_boundry)) {
-		rstrm->frag_sent = FALSE;
-		return (flush_out(rstrm, TRUE));
-	}
-	len = (u_long) (rstrm->out_finger) - (u_long) (rstrm->frag_header) -
-		sizeof(u_long);
-	*(rstrm->frag_header) = htonl((u_long) len | LAST_FRAG);
-	rstrm->frag_header = (u_long *) rstrm->out_finger;
-	rstrm->out_finger += sizeof(u_long);
-	return (TRUE);
-}
-
-
diff --git a/mdk-stage1/dietlibc/librpc/xdr_reference.c b/mdk-stage1/dietlibc/librpc/xdr_reference.c
deleted file mode 100644
index 7715d821c..000000000
--- a/mdk-stage1/dietlibc/librpc/xdr_reference.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/* @(#)xdr_reference.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)xdr_reference.c 1.11 87/08/11 SMI";
-#endif
-
-/*
- * xdr_reference.c, Generic XDR routines impelmentation.
- *
- * Copyright (C) 1987, Sun Microsystems, Inc.
- *
- * These are the "non-trivial" xdr primitives used to serialize and de-serialize
- * "pointers".  See xdr.h for more info on the interface to xdr.
- */
-
-#include <stdio.h>
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <string.h>
-
-#define LASTUNSIGNED	((u_int)0-1)
-
-/*
- * XDR an indirect pointer
- * xdr_reference is for recursively translating a structure that is
- * referenced by a pointer inside the structure that is currently being
- * translated.  pp references a pointer to storage. If *pp is null
- * the  necessary storage is allocated.
- * size is the sizeof the referneced structure.
- * proc is the routine to handle the referenced structure.
- */
-bool_t xdr_reference(xdrs, pp, size, proc)
-register XDR *xdrs;
-caddr_t *pp;					/* the pointer to work on */
-u_int size;						/* size of the object pointed to */
-xdrproc_t proc;					/* xdr routine to handle the object */
-{
-	register caddr_t loc = *pp;
-	register bool_t stat;
-
-	if (loc == NULL)
-		switch (xdrs->x_op) {
-		case XDR_FREE:
-			return (TRUE);
-
-		case XDR_DECODE:
-			*pp = loc = (caddr_t) mem_alloc(size);
-			if (loc == NULL) {
-				(void) fprintf(stderr, "xdr_reference: out of memory\n");
-				return (FALSE);
-			}
-			bzero(loc, (int) size);
-			break;
-		}
-
-	stat = (*proc) (xdrs, loc, LASTUNSIGNED);
-
-	if (xdrs->x_op == XDR_FREE) {
-		mem_free(loc, size);
-		*pp = NULL;
-	}
-	return (stat);
-}
-
-
-/*
- * xdr_pointer():
- *
- * XDR a pointer to a possibly recursive data structure. This
- * differs with xdr_reference in that it can serialize/deserialiaze
- * trees correctly.
- *
- *  What's sent is actually a union:
- *
- *  union object_pointer switch (boolean b) {
- *  case TRUE: object_data data;
- *  case FALSE: void nothing;
- *  }
- *
- * > objpp: Pointer to the pointer to the object.
- * > obj_size: size of the object.
- * > xdr_obj: routine to XDR an object.
- *
- */
-bool_t xdr_pointer(xdrs, objpp, obj_size, xdr_obj)
-register XDR *xdrs;
-char **objpp;
-u_int obj_size;
-xdrproc_t xdr_obj;
-{
-
-	bool_t more_data;
-
-	more_data = (*objpp != NULL);
-	if (!xdr_bool(xdrs, &more_data)) {
-		return (FALSE);
-	}
-	if (!more_data) {
-		*objpp = NULL;
-		return (TRUE);
-	}
-	return (xdr_reference(xdrs, objpp, obj_size, xdr_obj));
-}
diff --git a/mdk-stage1/dietlibc/librpc/xdr_stdio.c b/mdk-stage1/dietlibc/librpc/xdr_stdio.c
deleted file mode 100644
index e3190e0a9..000000000
--- a/mdk-stage1/dietlibc/librpc/xdr_stdio.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/* @(#)xdr_stdio.c	2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
-	"@(#)xdr_stdio.c 1.16 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * xdr_stdio.c, XDR implementation on standard i/o file.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * This set of routines implements a XDR on a stdio stream.
- * XDR_ENCODE serializes onto the stream, XDR_DECODE de-serializes
- * from the stream.
- */
-
-#include <rpc/types.h>
-#include <stdio.h>
-#include <rpc/xdr.h>
-
-static bool_t xdrstdio_getlong();
-static bool_t xdrstdio_putlong();
-static bool_t xdrstdio_getbytes();
-static bool_t xdrstdio_putbytes();
-static u_int xdrstdio_getpos();
-static bool_t xdrstdio_setpos();
-static int32_t *xdrstdio_inline();
-static void xdrstdio_destroy();
-
-/*
- * Ops vector for stdio type XDR
- */
-static struct xdr_ops xdrstdio_ops = {
-	xdrstdio_getlong,			/* deseraialize a long int */
-	xdrstdio_putlong,			/* seraialize a long int */
-	xdrstdio_getbytes,			/* deserialize counted bytes */
-	xdrstdio_putbytes,			/* serialize counted bytes */
-	xdrstdio_getpos,			/* get offset in the stream */
-	xdrstdio_setpos,			/* set offset in the stream */
-	xdrstdio_inline,			/* prime stream for inline macros */
-	xdrstdio_destroy			/* destroy stream */
-};
-
-/*
- * Initialize a stdio xdr stream.
- * Sets the xdr stream handle xdrs for use on the stream file.
- * Operation flag is set to op.
- */
-void xdrstdio_create(xdrs, file, op)
-register XDR *xdrs;
-FILE *file;
-enum xdr_op op;
-{
-
-	xdrs->x_op = op;
-	xdrs->x_ops = &xdrstdio_ops;
-	xdrs->x_private = (caddr_t) file;
-	xdrs->x_handy = 0;
-	xdrs->x_base = 0;
-}
-
-/*
- * Destroy a stdio xdr stream.
- * Cleans up the xdr stream handle xdrs previously set up by xdrstdio_create.
- */
-static void xdrstdio_destroy(xdrs)
-register XDR *xdrs;
-{
-	(void) fflush((FILE *) xdrs->x_private);
-	/* xx should we close the file ?? */
-};
-
-static bool_t xdrstdio_getlong(xdrs, lp)
-XDR *xdrs;
-register long *lp;
-{
-
-	if (fread((caddr_t) lp, sizeof(long), 1, (FILE *) xdrs->x_private) !=
-		1) return (FALSE);
-
-#ifndef mc68000
-	*lp = ntohl(*lp);
-#endif
-	return (TRUE);
-}
-
-static bool_t xdrstdio_putlong(xdrs, lp)
-XDR *xdrs;
-long *lp;
-{
-
-#ifndef mc68000
-	long mycopy = htonl(*lp);
-
-	lp = &mycopy;
-#endif
-	if (fwrite((caddr_t) lp, sizeof(long), 1, (FILE *) xdrs->x_private) !=
-		1) return (FALSE);
-
-	return (TRUE);
-}
-
-static bool_t xdrstdio_getbytes(xdrs, addr, len)
-XDR *xdrs;
-caddr_t addr;
-u_int len;
-{
-
-	if ((len != 0)
-		&& (fread(addr, (int) len, 1, (FILE *) xdrs->x_private) != 1))
-		return (FALSE);
-	return (TRUE);
-}
-
-static bool_t xdrstdio_putbytes(xdrs, addr, len)
-XDR *xdrs;
-caddr_t addr;
-u_int len;
-{
-
-	if ((len != 0)
-		&& (fwrite(addr, (int) len, 1, (FILE *) xdrs->x_private) != 1))
-		return (FALSE);
-	return (TRUE);
-}
-
-static u_int xdrstdio_getpos(xdrs)
-XDR *xdrs;
-{
-
-	return ((u_int) ftell((FILE *) xdrs->x_private));
-}
-
-static bool_t xdrstdio_setpos(xdrs, pos)
-XDR *xdrs;
-u_int pos;
-{
-
-	return ((fseek((FILE *) xdrs->x_private, (long) pos, 0) < 0) ?
-			FALSE : TRUE);
-}
-
-static int32_t *xdrstdio_inline(xdrs, len)
-XDR *xdrs;
-u_int len;
-{
-
-	/*
-	 * Must do some work to implement this: must insure
-	 * enough data in the underlying stdio buffer,
-	 * that the buffer is aligned so that we can indirect through a
-	 * long *, and stuff this pointer in xdrs->x_buf.  Doing
-	 * a fread or fwrite to a scratch buffer would defeat
-	 * most of the gains to be had here and require storage
-	 * management on this buffer, so we don't do this.
-	 */
-	return (NULL);
-}
diff --git a/mdk-stage1/dietlibc/libshell/fnmatch.c b/mdk-stage1/dietlibc/libshell/fnmatch.c
deleted file mode 100644
index 4e7664510..000000000
--- a/mdk-stage1/dietlibc/libshell/fnmatch.c
+++ /dev/null
@@ -1,74 +0,0 @@
-#include <ctype.h>
-#include <fnmatch.h>
-
-#define NOTFIRST 128
-
-static int match(char c,char d,int flags) {
-  if (flags&FNM_CASEFOLD)
-    return (tolower(c)==tolower(d));
-  else
-    return (c==d);
-}
-
-int fnmatch(const char *pattern, const char *string, int flags) {
-  if (*string==0) {
-    while (*pattern=='*') ++pattern;
-    return (!!*pattern);
-  }
-  if (*string=='.' && *pattern!='.' && (flags&FNM_PERIOD)) {
-    /* don't match if FNM_PERIOD and this is the first char */
-    if ((flags&FNM_PERIOD) && (!(flags&NOTFIRST)))
-      return 1;
-    /* don't match if FNM_PERIOD and FNM_FILE_NAME and previous was '/' */
-    if ((flags&(FNM_FILE_NAME|FNM_PERIOD)) && string[-1]=='/')
-      return 1;
-  }
-  flags|=NOTFIRST;
-  switch (*pattern) {
-  case '[':
-    ++pattern;
-    while (*pattern && *pattern!=']') {
-      if (flags&FNM_PATHNAME || *string!='/') {
-	int res=0;
-	if (pattern[1]=='-') {
-	  if (*string>=*pattern && *string<=pattern[2]) res=1;
-	  if (flags&FNM_CASEFOLD) {
-	    if (tolower(*string)>=tolower(*pattern) && tolower(*string)<=tolower(pattern[2])) res=1;
-	  }
-	} else
-	  res=match(*pattern,*string,flags);
-	if (res) {
-	  while (*pattern && *pattern!=']') ++pattern;
-	  return fnmatch(pattern+1,string+1,flags);
-	}
-      }
-      ++pattern;
-    }
-    break;
-  case '\\':
-    if (flags&FNM_NOESCAPE) {
-      if (*string=='\\')
-	return fnmatch(pattern+1,string+1,flags);
-    } else {
-      if (*string==pattern[1])
-	return fnmatch(pattern+2,string+1,flags);
-    }
-    break;
-  case '*':
-    if (!pattern[1] || fnmatch(pattern+1,string,flags)==0)
-      return 0;
-    else
-      if (*string!='/')
-	return fnmatch(pattern,string+1,flags);
-    break;
-  case 0:
-    if (*string==0 || (*string=='/' && (flags&FNM_LEADING_DIR)))
-      return 0;
-    break;
-  default:
-    if (match(*pattern,*string,flags))
-      return fnmatch(pattern+1,string+1,flags);
-    break;
-  }
-  return 1;
-}
diff --git a/mdk-stage1/dietlibc/libshell/glob.c b/mdk-stage1/dietlibc/libshell/glob.c
deleted file mode 100644
index 34d09d87a..000000000
--- a/mdk-stage1/dietlibc/libshell/glob.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * dietlibc/libshell/glob.c
- *
- * Copyright 2001 Guillaume Cottenceau <gc@mandrakesoft.com>
- *
- * This is free software, licensed under the Gnu General Public License.
- *
- */
-
-/*
- * unsupported: GLOB_BRACE GLOB_ALTDIRFUNC GLOB_MAGCHAR
- */
-
-#define DEBUG(x)
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <assert.h>
-#include <fnmatch.h>
-#include <dirent.h>
-#include <pwd.h>
-
-#include <glob.h>
-
-
-
-/* If i18n, should be using strcoll */
-static int cmp_func(const void * a, const void * b)
-{
-	const char *const s1 = *(const char *const * const) a;
-	const char *const s2 = *(const char *const * const) b;
-	if (s1 == NULL)
-		return 1;
-	if (s2 == NULL)
-		return -1;
-	return strcmp(s1, s2);
-}
-
-
-/* Like `glob', but PATTERN is a final pathname component,
-   and matches are searched for in DIRECTORY.
-   The GLOB_NOSORT bit in FLAGS is ignored.  No sorting is ever done.
-   The GLOB_APPEND flag is assumed to be set (always appends).
-   Prepends DIRECTORY in constructed PGLOB. */
-static int glob_in_dir(const char *pattern, const char *directory, int flags,
-		       int errfunc(const char * epath, int eerrno),
-		       glob_t *pglob)
-{
-	DIR *dp = opendir(directory);
-	int nfound = 0;
-
-	int i;
-	char * ptr;
-
-	void close_dir_keep_errno(void) {
-		int save = errno;
-		if (dp)
-			closedir (dp);
-		__set_errno(save);
-	}
-	int add_entry(const char * name) {
-		pglob->gl_pathv	= (char **) realloc(pglob->gl_pathv,
-						    (pglob->gl_pathc + pglob->gl_offs + 2)
-						    * sizeof (char *));
-		if (pglob->gl_pathv == NULL)
-			return 1;
-		pglob->gl_pathv[pglob->gl_offs + pglob->gl_pathc] = strdup(name);
-		pglob->gl_pathv[pglob->gl_offs + pglob->gl_pathc + 1] = NULL;
-		pglob->gl_pathc++;
-		nfound++;
-		return 0;
-	}
-	void build_fullname(char * fullname, int fullnamesize, const char * directory, const char * filename) {
-		if (!strcmp(directory, "/"))
-			snprintf(fullname, fullnamesize, "/%s", filename);
-		else if (!strcmp(directory, "."))
-			snprintf(fullname, fullnamesize, "%s", filename);
-		else
-			snprintf(fullname, fullnamesize, "%s/%s", directory, filename);
-	}
-
-	if (!dp) {
-		if (errno != ENOTDIR
-		    && ((errfunc != NULL && (*errfunc) (directory, errno))
-			|| (flags & GLOB_ERR)))
-		      return GLOB_ABORTED;
-	} else {
-		int fnm_flags = ((!(flags & GLOB_PERIOD) ? FNM_PERIOD : 0)
-				 | ((flags & GLOB_NOESCAPE) ? FNM_NOESCAPE : 0));
-		struct dirent *ep;
-		while ((ep = readdir(dp))) {
-			i = strlen(directory) + strlen(ep->d_name) + 2;
-			ptr = (char *) alloca(i);
-			build_fullname(ptr, i, directory, ep->d_name);
-			if (flags & GLOB_ONLYDIR) {
-				struct stat statr;
-				if (stat(ptr, &statr) || !S_ISDIR(statr.st_mode))
-					continue;
-			}
-			if (fnmatch(pattern, ep->d_name, fnm_flags) == 0)
-				if (add_entry(ptr))
-					goto memory_error;
-		}
-	}
-
-	close_dir_keep_errno();
-
-	if (nfound != 0)
-		pglob->gl_flags = flags;
-	else if (flags & GLOB_NOCHECK) {
-		/* nfound == 0 */
-		i = strlen(directory) + strlen(pattern) + 2;
-		ptr = (char *) alloca(i);
-		build_fullname(ptr, i, directory, pattern);
-		if (add_entry(ptr))
-			goto memory_error;
-	}
-
-	return (nfound == 0) ? GLOB_NOMATCH : 0;
-
- memory_error:
-	/* We're in trouble since we can't free the already allocated memory. [allocated from strdup(filame)]
-	 * Well, after all, when malloc returns NULL we're already in a bad mood, and no doubt the
-	 * program will manage to segfault by itself very soon :-). */
-	close_dir_keep_errno();
-	return GLOB_NOSPACE;
-}
-
-
-
-int glob(const char *pattern, int flags, int errfunc(const char * epath, int eerrno), glob_t *pglob)
-{
-	char * pattern_;
-	char * filename;
-	char * dirname;
-	size_t oldcount;
-	struct stat statr;
-
-	size_t i; /* tmp variables are declared here to save a bit of object space */
-	int j, k;    /* */
-	char * ptr, * ptr2;
-
-	if (pattern == NULL || pglob == NULL || (flags & ~__GLOB_FLAGS) != 0) {
-		__set_errno (EINVAL);
-		return -1;
-	}
-
-	if (!(flags & GLOB_DOOFFS))
-		pglob->gl_offs = 0;
-
-
-	/* Duplicate pattern so I can make modif to it later (to handle
-           TILDE stuff replacing old contents, and to null-terminate the
-           directory) */
-	pattern_ = alloca(strlen(pattern) + 1);
-	strcpy(pattern_, pattern);
-
-	/* Check for TILDE stuff */
-	if ((flags & (GLOB_TILDE|GLOB_TILDE_CHECK)) && pattern_[0] == '~') {
-		char * home_dir = NULL;
-		if (pattern_[1] == '\0' || pattern_[1] == '/') {
-			/* She's asking for ~, her homedir */
-			home_dir = getenv("HOME");
-		} else {
-			/* She's asking for another one's homedir */
-			struct passwd * p;
-			ptr2 = alloca(strlen(pattern_) + 1);
-			strcpy(ptr2, pattern_ + 1);
-			ptr = strchr(ptr2, '/');
-			if (ptr != NULL)
-				*ptr = '\0';
-			if (((p = getpwnam(ptr2)) != NULL))
-				home_dir = p->pw_dir;
-		}
-		if (home_dir != NULL) {
-			i = strlen(home_dir) + strlen(pattern_); /* pessimistic (the ~ case) */
-			ptr = alloca(i);
-			strncpy(ptr, home_dir, i);
-			ptr2 = pattern_ + 1;
-			while (*ptr2 != '/' && *ptr2 != '\0')
-				ptr2++;
-			strncat(ptr, ptr2, i);
-			pattern_ = ptr;
-		} else if (flags & GLOB_TILDE_CHECK)
-			return GLOB_NOMATCH;
-	}
-
-	/* Find the filename */
-	filename = strrchr(pattern_, '/');
-
-	if (filename == NULL) {
-		/* We have no '/' in the pattern */
-		filename = pattern_;
-		dirname = ".";
-	} else if (filename == pattern_) {
-		/* "/pattern".  */
-		dirname = "/";
-		filename++;
-	} else {
-		dirname = pattern_;
-		filename++;
-		/* allow dirname to be null terminated */
-		*(filename-1) = '\0';
-
-		if (filename[0] == '\0' && strcmp(pattern_, "/")) {
-			/* "pattern/".  Expand "pattern", appending slashes.  */
-			j = glob(dirname, flags | GLOB_MARK, errfunc, pglob);
-			if (j == 0)
-				pglob->gl_flags = ((pglob->gl_flags & ~GLOB_MARK)
-						   | (flags & GLOB_MARK));
-			return j;
-		}
-	}
-
-	
-	/* Reserve memory for pglob */
-	if (!(flags & GLOB_APPEND)) {
-		pglob->gl_pathc = 0;
-		if (!(flags & GLOB_DOOFFS))
-			pglob->gl_pathv = NULL;
-		else {
-			pglob->gl_pathv = (char **) malloc((pglob->gl_offs + 1) * sizeof (char *));
-			if (pglob->gl_pathv == NULL)
-				return GLOB_NOSPACE;
-			for (i = 0; i <= pglob->gl_offs; i++)
-				pglob->gl_pathv[i] = NULL;
-		}
-	}
-
-
-	oldcount = pglob->gl_pathc + pglob->gl_offs;
-
-
-	/* Begin real work */
-	if (!strcmp(dirname, "/") || !strcmp(dirname, ".")
-	    || (!strchr(dirname, '*') && !strchr(dirname, '?') && !strchr(dirname, '['))) {
-		/* Approx of a terminal state, glob directly in dir. */
-		j = glob_in_dir(filename, dirname, flags, errfunc, pglob);
-		if (j != 0)
-			return j;
-	} else {
-		/* We are not in a terminal state, so we have to glob for
-		   the directory, and then glob for the pattern in each
-		   directory found. */
-		glob_t dirs;
-
-		j = glob(dirname, ((flags & (GLOB_ERR | GLOB_NOCHECK | GLOB_NOESCAPE | GLOB_ALTDIRFUNC))
-				   | GLOB_NOSORT | GLOB_ONLYDIR),
-			 errfunc, &dirs);
-		if (j != 0)
-			return j;
-
-		/* We have successfully globbed the directory name.
-		   For each name we found, call glob_in_dir on it and FILENAME,
-		   appending the results to PGLOB.  */
-		for (i = 0; i < dirs.gl_pathc; i++) {
-			j = glob_in_dir(filename, dirs.gl_pathv[i], ((flags | GLOB_APPEND) & ~GLOB_NOCHECK),
-					errfunc, pglob);
-			if (j == GLOB_NOMATCH)
-				/* No matches in this directory.  Try the next.  */
-				continue;
-			if (j != 0) {
-				globfree(&dirs);
-				globfree(pglob);
-				return j;
-			}
-		}
-
-		/* We have ignored the GLOB_NOCHECK flag in the `glob_in_dir' calls.
-		   But if we have not found any matching entry and the GLOB_NOCHECK
-		   flag was set we must return the list consisting of the disrectory
-		   names followed by the filename.  */
-		if (pglob->gl_pathc + pglob->gl_offs == oldcount)
-		{
-			/* No matches.  */
-			if (flags & GLOB_NOCHECK)
-			{
-				for (i = 0; i < dirs.gl_pathc; i++) {
-					if (stat(dirs.gl_pathv[i], &statr) || !S_ISDIR(statr.st_mode))
-						continue;
-
-					/* stat is okay, we will add the entry, but before let's resize the pathv */
-					j = pglob->gl_pathc + pglob->gl_offs;
-					pglob->gl_pathv = (char **) realloc(pglob->gl_pathv, (j + 2) * sizeof (char *));
-					if (pglob->gl_pathv == NULL) {
-						globfree (&dirs);
-						return GLOB_NOSPACE;
-					}
-
-					/* okay now we add the new entry */
-					k = strlen(dirs.gl_pathv[i]) + 1 + strlen(filename) + 1;
-					if ((pglob->gl_pathv[j] = malloc(k)) == NULL) {
-						globfree(&dirs);
-						globfree(pglob);
-						return GLOB_NOSPACE;
-					}
-					snprintf(pglob->gl_pathv[j], k, "%s/%s", dirs.gl_pathv[i], filename);
-					pglob->gl_pathc++;
-					pglob->gl_pathv[j+1] = NULL;
-				}
-			} else {
-				globfree(&dirs);
-				return GLOB_NOMATCH;
-			}
-		}
-
-		globfree (&dirs);
-	}
-
-
-	if (flags & GLOB_MARK) {
-		for (i = oldcount; i < pglob->gl_pathc + pglob->gl_offs; i++)
-			if (!stat(pglob->gl_pathv[i], &statr) && S_ISDIR(statr.st_mode)) {
-				size_t len = strlen(pglob->gl_pathv[i]) + 2;
-				ptr = realloc(pglob->gl_pathv[i], len);
-				if (ptr == NULL) {
-					globfree(pglob);
-					return GLOB_NOSPACE;
-				}
-				strcpy(&ptr[len - 2], "/");
-				pglob->gl_pathv[i] = ptr;
-			}
-	}
-
-	if (!(flags & GLOB_NOSORT)) {
-		qsort(&pglob->gl_pathv[oldcount],
-		      pglob->gl_pathc + pglob->gl_offs - oldcount,
-		      sizeof(char *), cmp_func);
-	}
-
-	return 0;
-}
-
-
-/* Free storage allocated in PGLOB by a previous `glob' call.  */
-void globfree (glob_t * pglob)
-{
-  if (pglob->gl_pathv != NULL) {
-      size_t i;
-      for (i = 0; i < pglob->gl_pathc; i++)
-	      if (pglob->gl_pathv[pglob->gl_offs + i] != NULL)
-		      free((void *) pglob->gl_pathv[pglob->gl_offs + i]);
-      free((void *) pglob->gl_pathv);
-  }
-}
diff --git a/mdk-stage1/dietlibc/libshell/realpath.c b/mdk-stage1/dietlibc/libshell/realpath.c
deleted file mode 100644
index 1377018e5..000000000
--- a/mdk-stage1/dietlibc/libshell/realpath.c
+++ /dev/null
@@ -1,31 +0,0 @@
-#include <limits.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <string.h>
-#include "dietfeatures.h"
-
-char *realpath(const char *path, char *resolved_path) {
-  int fd=open(".",O_RDONLY);
-  char *tmp="";
-  if (chdir(path)) {
-#ifdef WANT_THREAD_SAFE
-    if (*__errno_location()==ENOTDIR)
-#else
-    if (errno==ENOTDIR)
-#endif
-    {
-      if ((tmp=strrchr(path,'/'))) {
-	memmove(resolved_path,path,tmp-path);
-	resolved_path[tmp-path]=0;
-	if (chdir(resolved_path)) { resolved_path=0; goto abort; }
-      }
-    }
-  }
-  if (!getcwd(resolved_path,PATH_MAX)) { resolved_path=0; goto abort; }
-  strcat(resolved_path,tmp);
-abort:
-  fchdir(fd);
-  close(fd);
-  return resolved_path;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/clearerr.c b/mdk-stage1/dietlibc/libstdio/clearerr.c
deleted file mode 100644
index 8bde8c702..000000000
--- a/mdk-stage1/dietlibc/libstdio/clearerr.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "dietstdio.h"
-
-void clearerr( FILE *stream) {
-  stream->flags&=~(ERRORINDICATOR|EOFINDICATOR);
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fclose.c b/mdk-stage1/dietlibc/libstdio/fclose.c
deleted file mode 100644
index a955c6086..000000000
--- a/mdk-stage1/dietlibc/libstdio/fclose.c
+++ /dev/null
@@ -1,26 +0,0 @@
-#include "dietstdio.h"
-#include <stdlib.h>
-#include <unistd.h>
-
-int fclose(FILE *stream) {
-  int res;
-#ifdef WANT_BUFFERED_STDIO
-  FILE *f,*fl;
-#endif
-  if (!stream)
-	  return EOF;
-  fflush(stream);
-  res=close(stream->fd);
-#ifdef WANT_BUFFERED_STDIO
-  for (fl=0,f=__stdio_root; f; fl=f,f=f->next)
-    if (f==stream) {
-      if (fl)
-	fl->next=f->next;
-      else
-	__stdio_root=f->next;
-      break;
-    }
-#endif
-  free(stream);
-  return res;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fdglue.c b/mdk-stage1/dietlibc/libstdio/fdglue.c
deleted file mode 100644
index 1c3918f1f..000000000
--- a/mdk-stage1/dietlibc/libstdio/fdglue.c
+++ /dev/null
@@ -1,52 +0,0 @@
-#include "dietstdio.h"
-#include <unistd.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <stdlib.h>
-
-#ifdef WANT_BUFFERED_STDIO
-extern int __stdio_atexit;
-extern void __stdio_flushall();
-#endif
-
-int __stdio_parse_mode(const char *mode) {
-  int f=0;
-  for (;;) {
-    switch (*mode) {
-    case 0: return f;
-    case 'b': break;
-    case 'r': f=O_RDONLY; break;
-    case 'w': f=O_WRONLY|O_CREAT|O_TRUNC; break;
-    case 'a': f=O_WRONLY|O_CREAT|O_APPEND; break;
-    case '+': f=(f&(~O_WRONLY))|O_RDWR; break;
-    }
-    ++mode;
-  }
-}
-
-FILE* __stdio_init_file(int fd) {
-  FILE *tmp=(FILE*)malloc(sizeof(FILE));
-  if (!tmp) {
-    close(fd);
-    errno=ENOMEM;
-    return 0;
-  }
-  tmp->fd=fd;
-#ifdef WANT_BUFFERED_STDIO
-  tmp->bm=0;
-  tmp->bs=0;
-#endif
-#ifdef WANT_UNGETC
-  tmp->ungotten = 0;
-#endif
-  tmp->flags=0;
-#ifdef WANT_BUFFERED_STDIO
-  if (__stdio_atexit==0) {
-    __stdio_atexit=1;
-    atexit(__stdio_flushall);
-  }
-  tmp->next=__stdio_root;
-  __stdio_root=tmp;
-#endif
-  return tmp;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fdopen.c b/mdk-stage1/dietlibc/libstdio/fdopen.c
deleted file mode 100644
index aee14fb0c..000000000
--- a/mdk-stage1/dietlibc/libstdio/fdopen.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <sys/types.h>
-#include <dietstdio.h>
-#include <unistd.h>
-
-#define SEEK_END 2
-
-int __stdio_parse_mode(const char *mode);
-FILE* __stdio_init_file(int fd);
-
-FILE *fdopen (int filedes, const char *mode) {
-  int f=0;	/* O_RDONLY, O_WRONLY or O_RDWR */
-  int fd;
-
-  f=__stdio_parse_mode(mode);
-  if ((fd=filedes)<0) return 0;
-  {
-	  FILE * ret = __stdio_init_file(fd);
-	  ret->flags |= UNSEEKABLE;
-	  return ret;
-  }
-}
diff --git a/mdk-stage1/dietlibc/libstdio/feof.c b/mdk-stage1/dietlibc/libstdio/feof.c
deleted file mode 100644
index b7e86fe3b..000000000
--- a/mdk-stage1/dietlibc/libstdio/feof.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <dietstdio.h>
-
-int feof(FILE *stream) {
-#ifdef WANT_UNGETC
-  /* yuck!!! */
-  if (stream->ungotten) return 0;
-#endif
-  return (stream->flags&EOFINDICATOR);
-}
diff --git a/mdk-stage1/dietlibc/libstdio/ferror.c b/mdk-stage1/dietlibc/libstdio/ferror.c
deleted file mode 100644
index e86873be0..000000000
--- a/mdk-stage1/dietlibc/libstdio/ferror.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <dietstdio.h>
-
-int ferror(FILE *stream) {
-  return (stream->flags&ERRORINDICATOR);
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fflush.c b/mdk-stage1/dietlibc/libstdio/fflush.c
deleted file mode 100644
index 7078e04f4..000000000
--- a/mdk-stage1/dietlibc/libstdio/fflush.c
+++ /dev/null
@@ -1,62 +0,0 @@
-#include "dietstdio.h"
-#include <unistd.h>
-#include <stdlib.h>
-#include "dietwarning.h"
-
-FILE *__stdio_root;
-
-#ifdef WANT_BUFFERED_STDIO
-int __stdio_atexit=0;
-
-void __stdio_flushall() {
-  fflush(0);
-}
-
-extern int __fflush_stdin();
-extern int __fflush_stdout();
-extern int __fflush_stderr();
-
-int fflush(FILE *stream) {
-  if (stream==0) {
-    int res;
-    FILE *f;
-    __fflush_stdin();
-    __fflush_stdout();
-    __fflush_stderr();
-    for (res=0, f=__stdio_root; f; f=f->next)
-      if (fflush(f))
-	res=-1;
-    return res;
-  }
-  if (stream->flags&BUFINPUT) {
-    register int tmp;
-    if ((tmp=stream->bm-stream->bs)) lseek(stream->fd,tmp,SEEK_CUR);
-  } else
-    if (stream->bm && write(stream->fd,stream->buf,stream->bm)!=stream->bm) {
-      stream->flags|=ERRORINDICATOR;
-      return -1;
-    }
-  stream->bm=0;
-  return 0;
-}
-
-int __fflush4(FILE *stream,int next) {
-  if (!__stdio_atexit) {
-    __stdio_atexit=1;
-    atexit(__stdio_flushall);
-  }
-  if ((stream->flags&BUFINPUT)!=next) {
-    int res=fflush(stream);
-    stream->flags=(stream->flags&~BUFINPUT)|next;
-    return res;
-  }
-  return 0;
-}
-
-#else
-int fflush(FILE *stream) {
-  return 0;
-}
-#endif
-
-link_warning("fflush","warning: your code uses stdio (several kilobytes of bloat).")
diff --git a/mdk-stage1/dietlibc/libstdio/fgetc.c b/mdk-stage1/dietlibc/libstdio/fgetc.c
deleted file mode 100644
index 90d83961a..000000000
--- a/mdk-stage1/dietlibc/libstdio/fgetc.c
+++ /dev/null
@@ -1,40 +0,0 @@
-#include "dietstdio.h"
-#include <unistd.h>
-
-extern int feof(FILE *stream);
-
-int fgetc(FILE *stream) {
-  unsigned char c;
-#ifdef WANT_UNGETC
-  if (stream->ungotten) {
-    stream->ungotten=0;
-    return stream->ungetbuf;
-  }
-#endif
-  if (feof(stream))
-    return EOF;
-#ifdef WANT_BUFFERED_STDIO
-  if (__fflush4(stream,BUFINPUT)) return EOF;
-  if (stream->bm>=stream->bs) {
-    int len=read(stream->fd,stream->buf,BUFSIZE);
-    if (len==0) {
-      stream->flags|=EOFINDICATOR;
-      return EOF;
-    } else if (len<0) {
-      stream->flags|=ERRORINDICATOR;
-      return EOF;
-    }
-    stream->bm=0;
-    stream->bs=len;
-  }
-  c=stream->buf[stream->bm];
-  ++stream->bm;
-  return c;
-#else
-  if (read(stream->fd,&c,1)!=1) {
-    stream->flags|=ERRORINDICATOR;
-    return EOF;
-  }
-  return c;
-#endif
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fgets.c b/mdk-stage1/dietlibc/libstdio/fgets.c
deleted file mode 100644
index c613d452d..000000000
--- a/mdk-stage1/dietlibc/libstdio/fgets.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include "dietstdio.h"
-
-extern int ferror(FILE *stream);
-
-char *fgets(char *s, int size, FILE *stream) {
-  char *orig=s;
-  int l;
-  for (l=size; l>0;) {
-    int c=fgetc(stream);
-    if (c==EOF) break;
-    *s=c;
-    ++s;
-    --l;
-    if (c=='\n') break;
-  }
-  if (l==size || ferror(stream))
-    return 0;
-  *s=0;
-  return orig;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fileno.c b/mdk-stage1/dietlibc/libstdio/fileno.c
deleted file mode 100644
index f021d3881..000000000
--- a/mdk-stage1/dietlibc/libstdio/fileno.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <dietstdio.h>
-
-int fileno(FILE *stream) {
-  return stream->fd;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fopen.c b/mdk-stage1/dietlibc/libstdio/fopen.c
deleted file mode 100644
index aac17be42..000000000
--- a/mdk-stage1/dietlibc/libstdio/fopen.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <sys/types.h>
-#include <dietstdio.h>
-#include <unistd.h>
-
-#define SEEK_END 2
-
-extern int __stdio_atexit;
-extern void __stdio_flushall();
-
-extern int __stdio_parse_mode(const char *mode);
-extern FILE* __stdio_init_file(int fd);
-
-FILE *fopen (const char *path, const char *mode) {
-  int f=0;	/* O_RDONLY, O_WRONLY or O_RDWR */
-  int fd;
-
-  f=__stdio_parse_mode(mode);
-  if ((fd=open(path,f,0666))<0)
-    return 0;
-  return __stdio_init_file(fd);
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fprintf.c b/mdk-stage1/dietlibc/libstdio/fprintf.c
deleted file mode 100644
index 237fd1e51..000000000
--- a/mdk-stage1/dietlibc/libstdio/fprintf.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <stdarg.h>
-#include <linux/types.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-extern int vsnprintf (char *str,size_t size,const char *format, va_list arg_ptr);
-
-int fprintf(FILE *f,const char *format,...) {
-  int n;
-  char *printf_buf;
-/*  char printf_buf[1024]; */
-  va_list arg_ptr;
-  va_start(arg_ptr, format);
-  n=vsnprintf(0,1000000,format,arg_ptr);
-/*  write(1,printf_buf,strlen(printf_buf)); */
-  va_end (arg_ptr);
-  va_start (arg_ptr, format);
-  printf_buf=alloca(n+2);
-  n=vsnprintf(printf_buf,n+1,format,arg_ptr);
-  va_end (arg_ptr);
-  fwrite(printf_buf,n,1,f);
-  return n;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fputc.c b/mdk-stage1/dietlibc/libstdio/fputc.c
deleted file mode 100644
index b816f7c4d..000000000
--- a/mdk-stage1/dietlibc/libstdio/fputc.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <dietstdio.h>
-#ifndef WANT_BUFFERED_STDIO
-#include <unistd.h>
-#endif
-
-int fputc(int c, FILE *stream) {
-#ifdef WANT_BUFFERED_STDIO
-  if (__fflush4(stream,0)) return EOF;
-  if (stream->bm>=BUFSIZE-1)
-    if (fflush(stream)) return EOF;
-  stream->buf[stream->bm]=c;
-  ++stream->bm;
-  if ((stream->flags&BUFLINEWISE) && c=='\n')	/* puke */
-    if (fflush(stream)) return EOF;
-#else
-  write(stream->fd,&c,1);
-#endif
-  return 0;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fputs.c b/mdk-stage1/dietlibc/libstdio/fputs.c
deleted file mode 100644
index 51ee9a96e..000000000
--- a/mdk-stage1/dietlibc/libstdio/fputs.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "dietstdio.h"
-#include <string.h>
-
-int fputs(const char *s, FILE *stream) {
-  return fwrite(s,strlen(s),1,stream);
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fread.c b/mdk-stage1/dietlibc/libstdio/fread.c
deleted file mode 100644
index 29afa1489..000000000
--- a/mdk-stage1/dietlibc/libstdio/fread.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <sys/types.h>
-#include "dietstdio.h"
-#include <unistd.h>
-
-size_t fread( void *ptr, size_t size, size_t nmemb, FILE *stream) {
-  int res;
-#ifdef WANT_BUFFERED_STDIO
-  unsigned long i,j;
-  j=size*nmemb;
-#ifdef WANT_UNGETC
-  if (stream->ungotten) {
-    *(char*)ptr=stream->ungetbuf;
-    ptr=((char*)ptr)+1;
-    --j;
-  }
-  if (!j) return 1;
-#endif
-  for (i=0; i<j; ++i) {
-    res=fgetc(stream);
-    if (res==EOF)
-      return i/size;
-    else
-      ((unsigned char*)ptr)[i]=(unsigned char)res;
-  }
-  return nmemb;
-#else
-#ifdef WANT_UNGETC
-  unsigned long j=size*nmemb;
-#endif
-  fflush(stream);
-#ifdef WANT_UNGETC
-  if (stream->ungotten) {
-    *(char*)ptr=stream->ungetbuf;
-    ptr=((char*)ptr)+1;
-    --j;
-  }
-  if (!j) return 1;
-  res=read(stream->fd,ptr,j);
-#else
-  res=read(stream->fd,ptr,size*nmemb);
-#endif
-  if (res<0) {
-    stream->flags|=ERRORINDICATOR;
-    return 0;
-  } else if (res<size*nmemb)
-	  if (!(stream->flags & UNSEEKABLE)
-	      || ((stream->flags & UNSEEKABLE) && res == 0))
-		  stream->flags|=EOFINDICATOR;
-  return res/size;
-#endif
-}
diff --git a/mdk-stage1/dietlibc/libstdio/freopen.c b/mdk-stage1/dietlibc/libstdio/freopen.c
deleted file mode 100644
index 8d4644a10..000000000
--- a/mdk-stage1/dietlibc/libstdio/freopen.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <sys/types.h>
-#include <dietstdio.h>
-#include <unistd.h>
-
-FILE *freopen (const char *path, const char *mode, FILE *stream) {
-  fclose(stream);
-  stream=fopen(path,mode);
-  return stream;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fseek.c b/mdk-stage1/dietlibc/libstdio/fseek.c
deleted file mode 100644
index 5bb96bc6e..000000000
--- a/mdk-stage1/dietlibc/libstdio/fseek.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <dietstdio.h>
-#include <unistd.h>
-
-long fseek(FILE *stream, long offset, int whence) {
-  fflush(stream);
-#ifdef WANT_BUFFERED_STDIO
-  stream->bm=0; stream->bs=0;
-#endif
-  stream->flags&=~(ERRORINDICATOR|EOFINDICATOR);
-  return (lseek(stream->fd,offset,whence));
-}
diff --git a/mdk-stage1/dietlibc/libstdio/ftell.c b/mdk-stage1/dietlibc/libstdio/ftell.c
deleted file mode 100644
index 42d2c9f26..000000000
--- a/mdk-stage1/dietlibc/libstdio/ftell.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <dietstdio.h>
-#include <unistd.h>
-
-long ftell(FILE *stream) {
-  fflush(stream);
-  return (lseek(stream->fd,0,SEEK_CUR));
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fwrite.c b/mdk-stage1/dietlibc/libstdio/fwrite.c
deleted file mode 100644
index 5691661a5..000000000
--- a/mdk-stage1/dietlibc/libstdio/fwrite.c
+++ /dev/null
@@ -1,30 +0,0 @@
-#include <sys/types.h>
-#include "dietstdio.h"
-#include <unistd.h>
-
-size_t fwrite( const void *ptr, size_t size, size_t nmemb, FILE *stream) {
-  int res;
-#ifdef WANT_BUFFERED_STDIO
-  long len=size*nmemb;
-  long i;
-  if (len>BUFSIZE || (stream->flags&NOBUF)) {
-    if (!(stream->flags&NOBUF)) fflush(stream);
-    res=write(stream->fd,ptr,size*nmemb);
-  } else {
-    register const unsigned char *c=ptr;
-    for (i=size*nmemb; i>0; --i,++c)
-      if (fputc(*c,stream)) {
-	res=-1;
-	break;
-      }
-    res=size*nmemb;
-  }
-#else
-  res=write(stream->fd,ptr,size*nmemb);
-#endif
-  if (res<0) {
-    stream->flags|=ERRORINDICATOR;
-    return 0;
-  }
-  return size?res/size:0;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/printf.c b/mdk-stage1/dietlibc/libstdio/printf.c
deleted file mode 100644
index 571420dc3..000000000
--- a/mdk-stage1/dietlibc/libstdio/printf.c
+++ /dev/null
@@ -1,29 +0,0 @@
-#include <stdarg.h>
-#include <linux/types.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include "dietstdio.h"
-
-int vsnprintf (char *str,size_t size,const char *format, va_list arg_ptr);
-
-int printf(const char *format,...)
-{
-  int n;
-  char *printf_buf;
-/*  char printf_buf[1024]; */
-  va_list arg_ptr;
-  va_start(arg_ptr, format);
-  n=vsnprintf(0,1000000,format,arg_ptr);
-/*  write(1,printf_buf,strlen(printf_buf)); */
-  va_end (arg_ptr);
-  va_start (arg_ptr, format);
-  printf_buf=alloca(n+2);
-  n=vsnprintf(printf_buf,n+1,format,arg_ptr);
-#ifdef WANT_BUFFERED_STDIO
-  fwrite(printf_buf,n,1,stdout);
-#else
-  write(1,printf_buf,n);
-#endif
-  va_end (arg_ptr);
-  return n;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/putchar.c b/mdk-stage1/dietlibc/libstdio/putchar.c
deleted file mode 100644
index 7e5285a48..000000000
--- a/mdk-stage1/dietlibc/libstdio/putchar.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <stdio.h>
-
-#undef putchar
-int putchar(int c) {
-  return fputc(c,stdout);
-}
diff --git a/mdk-stage1/dietlibc/libstdio/setvbuf.c b/mdk-stage1/dietlibc/libstdio/setvbuf.c
deleted file mode 100644
index d0b1b7640..000000000
--- a/mdk-stage1/dietlibc/libstdio/setvbuf.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <sys/types.h>
-#include "dietstdio.h"
-#include <unistd.h>
-#include "dietwarning.h"
-
-int setvbuf(FILE *stream, char *buf, int flags , size_t size) {
-#ifdef WANT_BUFFERED_STDIO
-  switch (flags) {
-  case _IONBF: stream->flags = (stream->flags & ~(BUFLINEWISE)) | NOBUF; break;
-  case _IOLBF: stream->flags = (stream->flags & ~(BUFLINEWISE|NOBUF)) | BUFLINEWISE; break;
-  case _IOFBF: stream->flags = stream->flags & ~(NOBUF | BUFLINEWISE); break;
-  default: return -1;
-  }
-#endif
-  return 0;
-}
-
-link_warning("setvbuf","setvbuf does not implement changing the buffer in diet libc.")
diff --git a/mdk-stage1/dietlibc/libstdio/stderr.c b/mdk-stage1/dietlibc/libstdio/stderr.c
deleted file mode 100644
index a82b1b727..000000000
--- a/mdk-stage1/dietlibc/libstdio/stderr.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <dietstdio.h>
-
-#ifdef WANT_BUFFERED_STDIO
-static FILE __stderr = { 2, NOBUF, 0, 0 };
-
-int __fflush_stderr() {
-  return fflush(stderr);
-}
-#else
-static FILE __stderr = { 2, 0 };
-#endif
-
-FILE *stderr=&__stderr;
diff --git a/mdk-stage1/dietlibc/libstdio/stdin.c b/mdk-stage1/dietlibc/libstdio/stdin.c
deleted file mode 100644
index 2db82f9ab..000000000
--- a/mdk-stage1/dietlibc/libstdio/stdin.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <dietstdio.h>
-
-#ifdef WANT_BUFFERED_STDIO
-static FILE __stdin = { 0, BUFINPUT, 0, 0 };
-
-int __fflush_stdin() {
-  return fflush(stdin);
-}
-#else
-static FILE __stdin = { 0, 0 };
-#endif
-
-FILE *stdin=&__stdin;
diff --git a/mdk-stage1/dietlibc/libstdio/stdout.c b/mdk-stage1/dietlibc/libstdio/stdout.c
deleted file mode 100644
index 481fb1014..000000000
--- a/mdk-stage1/dietlibc/libstdio/stdout.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <dietstdio.h>
-
-#ifdef WANT_BUFFERED_STDIO
-static FILE __stdout = { 1, BUFLINEWISE, 0, 0 };
-
-int __fflush_stdout() {
-  return fflush(stdout);
-}
-#else
-static FILE __stdout = { 1, 0 };
-#endif
-
-FILE *stdout=&__stdout;
-
diff --git a/mdk-stage1/dietlibc/libstdio/ungetc.c b/mdk-stage1/dietlibc/libstdio/ungetc.c
deleted file mode 100644
index ae03e9381..000000000
--- a/mdk-stage1/dietlibc/libstdio/ungetc.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include "dietstdio.h"
-
-#ifdef WANT_UNGETC
-int ungetc(int c, FILE *stream) {
-  if (stream->ungotten)
-    return EOF;
-  stream->ungotten=1;
-  stream->ungetbuf=(char)(unsigned char)c;
-  return c;
-}
-#endif
diff --git a/mdk-stage1/dietlibc/libugly/asctime.c b/mdk-stage1/dietlibc/libugly/asctime.c
deleted file mode 100644
index e1fcc8706..000000000
--- a/mdk-stage1/dietlibc/libugly/asctime.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <time.h>
-
-static char buf[25];
-
-char *asctime(const struct tm *timeptr) {
-  return asctime_r(timeptr,buf);
-}
diff --git a/mdk-stage1/dietlibc/libugly/asctime_r.c b/mdk-stage1/dietlibc/libugly/asctime_r.c
deleted file mode 100644
index 46325927c..000000000
--- a/mdk-stage1/dietlibc/libugly/asctime_r.c
+++ /dev/null
@@ -1,29 +0,0 @@
-#include <time.h>
-
-static const char days[] = "Sun Mon Tue Wed Thu Fri Sat ";
-static const char months[] = "Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec ";
-
-static void num2str(char *c,int i) {
-  c[0]=i/10+'0';
-  c[1]=i%10+'0';
-}
-
-char *asctime_r(const struct tm *t, char *buf) {
-  /* "Wed Jun 30 21:49:08 1993\n" */
-  *(int*)buf=*(int*)(days+(t->tm_wday<<2));
-  *(int*)(buf+4)=*(int*)(months+(t->tm_mon<<2));
-  num2str(buf+8,t->tm_mday);
-  if (buf[8]=='0') buf[8]=' ';
-  buf[10]=' ';
-  num2str(buf+11,t->tm_hour);
-  if (buf[11]=='0') buf[11]=' ';
-  buf[13]=':';
-  num2str(buf+14,t->tm_min);
-  buf[16]=':';
-  num2str(buf+17,t->tm_sec);
-  buf[19]=' ';
-  num2str(buf+20,(t->tm_year+1900)/100);
-  num2str(buf+22,(t->tm_year+1900)%100);
-  buf[24]='\n';
-  return buf;
-}
diff --git a/mdk-stage1/dietlibc/libugly/asprintf.c b/mdk-stage1/dietlibc/libugly/asprintf.c
deleted file mode 100644
index d10c20b4a..000000000
--- a/mdk-stage1/dietlibc/libugly/asprintf.c
+++ /dev/null
@@ -1,22 +0,0 @@
-#include <stdarg.h>
-#include <linux/types.h>
-#include <stdlib.h>
-#include "dietwarning.h"
-
-extern int vsnprintf (char *str,size_t size,const char *format, va_list arg_ptr);
-
-int asprintf(char **s, const char *format,...)
-{
-  int n;
-  va_list arg_ptr;
-  va_start(arg_ptr, format);
-  n=vsnprintf(0,1000000,format,arg_ptr);
-  va_end (arg_ptr);
-  va_start (arg_ptr, format);
-  if ((*s=malloc(n+2))) {
-    n=vsnprintf(*s,n+1,format,arg_ptr);
-    va_end(arg_ptr);
-    return n;
-  }
-  return -1;
-}
diff --git a/mdk-stage1/dietlibc/libugly/ctime.c b/mdk-stage1/dietlibc/libugly/ctime.c
deleted file mode 100644
index a0e12d673..000000000
--- a/mdk-stage1/dietlibc/libugly/ctime.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <time.h>
-
-char *ctime(const time_t *timep) {
-  return asctime(localtime(timep));
-}
diff --git a/mdk-stage1/dietlibc/libugly/daemon.c b/mdk-stage1/dietlibc/libugly/daemon.c
deleted file mode 100644
index 6748cc3c9..000000000
--- a/mdk-stage1/dietlibc/libugly/daemon.c
+++ /dev/null
@@ -1,35 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <paths.h>
-
-#include "daemon.h"
-
-int daemon (int nochdir,int noclose)
-{
-   int fd;
-   switch (fork ())
-         {
-          case -1:
-                return (-1);
-          case 0:
-                break;
-          default:
-                _exit (0);
-         }
-   if (setsid () == -1)
-         return (-1);
-   if (!nochdir) chdir ("/");
-   if (!noclose)
-         {
-                fd = open (_PATH_DEVNULL,O_RDWR,0);
-                if (fd == -1) return (-1);
-                dup2 (fd,STDIN_FILENO);
-                dup2 (fd,STDOUT_FILENO);
-                dup2 (fd,STDERR_FILENO);
-                close (fd);
-         }
-   return (0);
-}
-
diff --git a/mdk-stage1/dietlibc/libugly/endmntent.c b/mdk-stage1/dietlibc/libugly/endmntent.c
deleted file mode 100644
index 00ade38e5..000000000
--- a/mdk-stage1/dietlibc/libugly/endmntent.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdio.h>
-#include <mntent.h>
-
-int endmntent(FILE *filep) {
-  return fclose(filep);
-}
-
diff --git a/mdk-stage1/dietlibc/libugly/facilitynames.c b/mdk-stage1/dietlibc/libugly/facilitynames.c
deleted file mode 100644
index 8b0e1f21f..000000000
--- a/mdk-stage1/dietlibc/libugly/facilitynames.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#include <sys/syslog.h>
-
-#ifndef INTERNAL_MARK
-#define INTERNAL_MARK 0x300
-#endif
-
-CODE facilitynames[] =
-  {
-    { "auth", LOG_AUTH },
-    { "authpriv", LOG_AUTHPRIV },
-    { "cron", LOG_CRON },
-    { "daemon", LOG_DAEMON },
-    { "ftp", LOG_FTP },
-    { "kern", LOG_KERN },
-    { "lpr", LOG_LPR },
-    { "mail", LOG_MAIL },
-    { "mark", INTERNAL_MARK },		/* INTERNAL */
-    { "news", LOG_NEWS },
-    { "security", LOG_AUTH },		/* DEPRECATED */
-    { "syslog", LOG_SYSLOG },
-    { "user", LOG_USER },
-    { "uucp", LOG_UUCP },
-    { "local0", LOG_LOCAL0 },
-    { "local1", LOG_LOCAL1 },
-    { "local2", LOG_LOCAL2 },
-    { "local3", LOG_LOCAL3 },
-    { "local4", LOG_LOCAL4 },
-    { "local5", LOG_LOCAL5 },
-    { "local6", LOG_LOCAL6 },
-    { "local7", LOG_LOCAL7 },
-    { 0, -1 }
-  };
diff --git a/mdk-stage1/dietlibc/libugly/getmntent.c b/mdk-stage1/dietlibc/libugly/getmntent.c
deleted file mode 100644
index 250a77b7f..000000000
--- a/mdk-stage1/dietlibc/libugly/getmntent.c
+++ /dev/null
@@ -1,30 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <mntent.h>
-#include <string.h>
-
-struct mntent *getmntent(FILE *filep) {
-  static struct mntent m;
-  char buf[1024];
-  do {
-    char *tmp=buf;
-    int num;
-    fgets(buf,1024,filep);
-/* "/dev/ide/host0/bus0/target0/lun0/part2 / reiserfs defaults 1 1" */
-    for (num=0; num<6; ++num) {
-      switch (num) {
-      case 0: m.mnt_fsname=tmp; break;
-      case 1: m.mnt_dir=tmp; break;
-      case 2: m.mnt_type=tmp; break;
-      case 3: m.mnt_opts=tmp; break;
-      case 4: m.mnt_freq=strtol(tmp,&tmp,0); if (*tmp!=' ') continue; break;
-      case 5: m.mnt_passno=strtol(tmp,&tmp,0); if (*tmp=='\n') return &m; break;
-      }
-      if ((tmp=strchr(tmp,' '))) {
-	if (num<4) *tmp++=0;
-	while (*tmp==' ') ++tmp;
-      } else
-	continue;
-    }
-  } while (1);
-}
diff --git a/mdk-stage1/dietlibc/libugly/getprotoent.c b/mdk-stage1/dietlibc/libugly/getprotoent.c
deleted file mode 100644
index a648e2307..000000000
--- a/mdk-stage1/dietlibc/libugly/getprotoent.c
+++ /dev/null
@@ -1,130 +0,0 @@
-#include <unistd.h>
-#include <fcntl.h>
-#include <netdb.h>
-#include <sys/mman.h>
-#include <errno.h>
-#include <netinet/in.h>
-#include <string.h>
-#include <ctype.h>
-
-static int protofd=-1;
-static char* protomap;
-static unsigned int protolen;
-
-static char* aliases[10];
-
-static char *cur;
-
-/* ip	0	IP		# internet protocol, pseudo protocol number */
-struct protoent *getprotoent(void) {
-  static struct protoent pe;
-  char *last;
-  int aliasidx;
-  if (protofd<0) {
-    protofd=open(_PATH_SERVICES,O_RDONLY);
-    if (protofd<0) return 0;
-    protolen=lseek(protofd,0,SEEK_END);
-    protomap=mmap(0,protolen,PROT_READ|PROT_WRITE,MAP_PRIVATE,protofd,0);
-    if ((long)protomap==(-1)) goto error;
-    cur=protomap;
-  }
-  last=protomap+protolen;
-again:
-  pe.p_name=0;
-  pe.p_aliases=aliases; aliases[0]=0;
-  pe.p_proto=0;
-  if (cur>=last) return 0;
-  if (*cur=='#' || *cur=='\n') goto parseerror;
-  /* first, the primary name */
-  if (!isalpha(*cur)) goto parseerror;
-  pe.p_name=cur;
-  pe.p_aliases=aliases;
-  while (cur<last && isalnum(*cur)) cur++;
-  if (cur>=last) return 0;
-  if (*cur=='\n') goto parseerror;
-  *cur=0; cur++;
-  /* second, the protocol number */
-  while (cur<last && isblank(*cur)) cur++;
-  while (cur<last && isdigit(*cur)) {
-    pe.p_proto=pe.p_proto*10+*cur-'0';
-    cur++;
-  }
-/*  pe.p_proto=htons(pe.s_proto); */
-  if (cur>=last) return 0;
-  if (*cur=='\n') { *cur++=0; return &pe; }
-  *cur=0; cur++;
-  /* now the aliases */
-  for (aliasidx=0;aliasidx<10;++aliasidx) {
-    while (cur<last && isblank(*cur)) ++cur;
-    aliases[aliasidx]=cur;
-    while (cur<last && isalpha(*cur)) ++cur;
-    if (*cur=='\n') { *cur++=0; ++aliasidx; break; }
-    if (cur>=last || !isblank(*cur)) break;
-    *cur++=0;
-  }
-  aliases[aliasidx]=0;
-  return &pe;
-parseerror:
-  while (cur<last && *cur!='\n') cur++;
-  cur++;
-  goto again;
-error:
-  if (protomap!=(char*)-1) munmap(protomap,protolen);
-  if (protofd!=-1) close(protofd);
-  protomap=(char*)-1;
-  protofd=-1;
-  errno=ENOMEM;
-  return 0;
-}
-
-void setprotoent(int stayopen) {
-  cur=protomap;
-}
-
-struct protoent *getprotobyname(const char *name) {
-  struct protoent *s;
-  setprotoent(0);
-  for (s=getprotoent(); s; s=getprotoent()) {
-    char **tmp;
-#if 0
-    write(1,"found ",6);
-    write(1,s->p_name,strlen(s->p_name));
-    write(1,"/",1);
-    write(1,s->p_proto,strlen(s->p_proto));
-    write(1,"\n",1);
-    if (!strcmp(name,"auth")) {
-      tmp=s->p_aliases;
-      write(1,"  aka ",5);
-      while (*tmp) {
-	write(1,*tmp,strlen(*tmp));
-	write(1,", ",2);
-	++tmp;
-      }
-      write(1,"\n",1);
-    }
-#endif
-    if (!strcmp(name,s->p_name))
-      return s;
-    tmp=s->p_aliases;
-    while (*tmp)
-      if (!strcmp(name,*tmp++)) return s;
-  }
-  return 0;
-}
-
-struct protoent *getprotobynumber(int proto) {
-  struct protoent *s;
-  for (s=getprotoent(); s; s=getprotoent()) {
-    if (proto==s->p_proto)
-      return s;
-  }
-  return 0;
-}
-
-void endprotoent(void) {
-  if (protomap!=(char*)-1) munmap(protomap,protolen);
-  if (protofd!=-1) close(protofd);
-  protomap=(char*)-1;
-  protofd=-1;
-}
-
diff --git a/mdk-stage1/dietlibc/libugly/gmtime.c b/mdk-stage1/dietlibc/libugly/gmtime.c
deleted file mode 100644
index d33af7972..000000000
--- a/mdk-stage1/dietlibc/libugly/gmtime.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <time.h>
-
-struct tm* gmtime(const time_t *t) {
-  static struct tm tmp;
-  return gmtime_r(t,&tmp);
-}
diff --git a/mdk-stage1/dietlibc/libugly/gmtime_r.c b/mdk-stage1/dietlibc/libugly/gmtime_r.c
deleted file mode 100644
index c102d10fa..000000000
--- a/mdk-stage1/dietlibc/libugly/gmtime_r.c
+++ /dev/null
@@ -1,35 +0,0 @@
-#include <time.h>
-
-/* seconds per day */
-#define SPD 24*60*60
-
-extern unsigned int __spm[];
-
-struct tm *gmtime_r(const time_t *timep, struct tm *r) {
-  time_t i;
-  register time_t work=*timep%(SPD);
-  r->tm_sec=work%60; work/=60;
-  r->tm_min=work%60; r->tm_hour=work/60;
-  work=*timep/(SPD);
-  r->tm_wday=(4+work)%7;
-  for (i=1970; ; ++i) {
-    register time_t k=__isleap(i)?366:365;
-    if (work>k)
-      work-=k;
-    else
-      break;
-  }
-  r->tm_year=i-1900;
-  r->tm_yday=work;
-
-  r->tm_mday=1;
-  if (__isleap(i) && (work>58)) {
-    if (work==59) r->tm_mday=2; /* 29.2. */
-    work-=1;
-  }
-
-  for (i=11; i && __spm[i]>work; --i) ;
-  r->tm_mon=i;
-  r->tm_mday+=work-__spm[i];
-  return r;
-}
diff --git a/mdk-stage1/dietlibc/libugly/isleap.c b/mdk-stage1/dietlibc/libugly/isleap.c
deleted file mode 100644
index dcfa1ced6..000000000
--- a/mdk-stage1/dietlibc/libugly/isleap.c
+++ /dev/null
@@ -1,6 +0,0 @@
-int __isleap(int year) {
-  /* every fourth year is a leap year except for century years that are
-   * not divisible by 400. */
-/*  return (year % 4 == 0 && (year % 100 != 0 || year % 400 == 0)); */
-  return (!(year%4) && ((year%100) || !(year%400)));
-}
diff --git a/mdk-stage1/dietlibc/libugly/localtime.c b/mdk-stage1/dietlibc/libugly/localtime.c
deleted file mode 100644
index 6fa6acf8a..000000000
--- a/mdk-stage1/dietlibc/libugly/localtime.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <time.h>
-
-struct tm* localtime(const time_t* t) {
-  static struct tm tmp;
-  return localtime_r(t,&tmp);
-}
diff --git a/mdk-stage1/dietlibc/libugly/localtime_r.c b/mdk-stage1/dietlibc/libugly/localtime_r.c
deleted file mode 100644
index d4bc073ce..000000000
--- a/mdk-stage1/dietlibc/libugly/localtime_r.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include "dietfeatures.h"
-#include <time.h>
-#include <sys/time.h>
-
-#ifdef WANT_TZFILE_PARSER
-extern void __maplocaltime();
-extern time_t __tzfile_map(time_t t, int *isdst);
-#endif
-
-struct tm* localtime_r(const time_t* t, struct tm* r) {
-  time_t tmp;
-#ifdef WANT_TZFILE_PARSER
-  __maplocaltime();
-  tmp=__tzfile_map(*t,&r->tm_isdst);
-#else
-  struct timezone tz;
-  gettimeofday(0, &tz);
-  tmp=*t-tz.tz_minuteswest*60L;
-#endif
-  return gmtime_r(&tmp,r);
-}
diff --git a/mdk-stage1/dietlibc/libugly/logging.c b/mdk-stage1/dietlibc/libugly/logging.c
deleted file mode 100644
index 69c2c2337..000000000
--- a/mdk-stage1/dietlibc/libugly/logging.c
+++ /dev/null
@@ -1,211 +0,0 @@
-#include "dietfeatures.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdarg.h>
-#include <errno.h>
-#include <unistd.h>
-#include <asm/socket.h>
-#include <fcntl.h>
-#include <syslog.h>
-#include <string.h>
-#include <time.h>
-#include <sys/socket.h>
-#include <signal.h>
-
-#define _PATH_CONSOLE	"/dev/console"
-#define BUF_SIZE 512	/* messagebuffer size (>= 200) */
-
-#define MAX_LOGTAG 80
-
-/* those have to be global *sigh* */
-static volatile int	connected = 0;  /* have done connect */
-static volatile int	LogMask = 0xff; /* mask of priorities to be logged */
-static char		LogTag[MAX_LOGTAG];	/* string to tag the entry with */
-static int		LogFile = -1;   /* fd for log */
-static int		LogType = SOCK_DGRAM; /* type of socket connection */
-static int		LogFacility = LOG_USER; /* default facility code */
-static int		LogStat;	/* status bits, set by openlog() */
-extern char		*__progname;	/* Program name, from crt0. */
-static struct sockaddr	SyslogAddr;	/* AF_UNIX address of local logger */
-
-static void closelog_intern(void)
-{
-  if (!connected) return;
-  close(LogFile);
-  LogFile = -1;
-  connected = 0;
-}
-
-void closelog(void)
-{
-  closelog_intern();
-
-  LogTag[0]=0;
-  LogType = SOCK_DGRAM;
-}
-
-static void openlog_intern(int option, int facility)
-{
-  LogStat = option;
-  if (facility && ((facility & ~LOG_FACMASK) == 0))
-    LogFacility = facility;
-
-  /* yep, there is a continue inside ;) */
-  while(1) {
-    if (LogFile == -1) {
-      SyslogAddr.sa_family = AF_UNIX;
-      strncpy(SyslogAddr.sa_data, _PATH_LOG, sizeof(SyslogAddr.sa_data));
-      if (LogStat & LOG_NDELAY)
-      {
-	if ((LogFile = socket(AF_UNIX, LogType, 0)) == -1) return;
-	fcntl(LogFile, F_SETFD, 1);
-      }
-    }
-    if ((LogFile != -1) && !connected) {
-#ifdef WANT_THREAD_SAFE
-      int old_errno = (*(__errno_location()));
-#else
-      int old_errno=errno;
-#endif
-      if(connect(LogFile, &SyslogAddr, sizeof(SyslogAddr)) == -1) {
-#ifdef WANT_THREAD_SAFE
-	int saved_errno = (*(__errno_location()));
-#else
-	int saved_errno=errno;
-#endif
-	close(LogFile);
-	LogFile = -1;
-	if((LogType == SOCK_DGRAM) && (saved_errno == EPROTOTYPE)) {
-	  /* retry with SOCK_STREAM instead of SOCK_DGRAM */
-	  LogType = SOCK_STREAM;
-#ifdef WANT_THREAD_SAFE
-	  (*(__errno_location()))=old_errno;
-#else
-	  errno=old_errno;
-#endif
-	  continue;
-	}
-      }
-      else connected = 1;
-    }
-    break;
-  }
-}
-
-/* has to be secured against multiple, simultanious call's in threaded environment */
-void openlog(const char *ident, int option, int facility)
-{
-  if (ident) {
-    strncpy(LogTag,ident,MAX_LOGTAG);
-    LogTag[MAX_LOGTAG-1]=0;
-  }
-  openlog_intern(option, facility);
-}
-
-int setlogmask(int mask)
-{
-  int old = LogMask;
-  if (mask) LogMask = mask;
-  return old;
-}
-
-void vsyslog(int priority, const char *format, va_list arg_ptr)
-{
-  char buffer[BUF_SIZE];
-  char time_buf[20];
-  int buflen, headerlen;
-  time_t now;
-  struct tm now_tm;
-  pid_t pid;
-  int fd;
-  int sigpipe;
-  struct sigaction action, oldaction;
-  struct sigaction *oldaction_ptr = NULL;
-#ifdef WANT_THREAD_SAFE
-  int saved_errno = (*(__errno_location()));
-#else
-  int saved_errno = errno;
-#endif
-
-  /* check for invalid priority/facility bits */
-  if (priority & ~(LOG_PRIMASK|LOG_FACMASK)) {
-    syslog(LOG_ERR|LOG_CONS|LOG_PERROR|LOG_PID, "syslog: unknown facility/priorityority: %x", priority);
-    priority &= LOG_PRIMASK|LOG_FACMASK;
-  }
-
-  /* check priority against setlogmask */
-  if ((LOG_MASK(LOG_PRI(priority)) && LogMask) == 0) return;
-
-  /* Set default facility if none specified. */
-  if ((priority & LOG_FACMASK) == 0) priority |= LogFacility;
-
-  pid = getpid();
-  time(&now);
-  strftime(time_buf, 20, "%h %e %T", localtime_r (&now, &now_tm));
-
-  if (LogStat & LOG_PID)
-    headerlen = snprintf(buffer, 130, "<%d>%s %s[%d]: ", priority, time_buf, LogTag, pid);
-  else
-    headerlen = snprintf(buffer, 130, "<%d>%s %s: ", priority, time_buf, LogTag);
-
-  if (!LogTag[0]) {
-    if ((LogStat & LOG_PID) != LOG_PID)
-      headerlen = snprintf(buffer, 130, "<%d>%s (unknown)[%d]: ", priority, time_buf, pid);
-    strcat(buffer+headerlen, "syslog without openlog w/ ident, please check code!");
-    buflen = 41;
-  }
-  else {
-#ifdef WANT_THREAD_SAFE
-    (*(__errno_location()))=saved_errno;
-#else
-    errno=saved_errno;
-#endif
-    buflen = vsnprintf(buffer+headerlen, BUF_SIZE - headerlen, format, arg_ptr);
-  }
-  if (LogStat & LOG_PERROR) {
-    write(1, buffer+headerlen, buflen);
-    if (buffer[headerlen+buflen] != '\n') write(1,"\n", 1);
-  }
-
-  /* prepare for broken connection */
-  memset(&action, 0, sizeof(action));
-  action.sa_handler = SIG_IGN;
-  sigemptyset(&action.sa_mask);
-
-  if ((sigpipe = sigaction (SIGPIPE, &action, &oldaction))==0)
-    oldaction_ptr = &oldaction;
-
-  if (!connected) openlog_intern(LogStat | LOG_NDELAY, 0);
-
-  /* If we have a SOCK_STREAM connection, also send ASCII NUL as a
-   * record terminator. */
-  if (LogType == SOCK_STREAM) buflen++;
-
-  if (!connected || (send(LogFile, buffer, buflen+headerlen, 0) != buflen+headerlen)) {
-    if (LogType == SOCK_STREAM) buflen--;
-    closelog_intern();
-    /*
-     * Output the message to the console; don't worry about blocking,
-     * if console blocks everything will.  Make sure the error reported
-     * is the one from the syslogd failure.
-     */
-    if ((LogStat & LOG_CONS) &&
-       ((fd = open(_PATH_CONSOLE, O_WRONLY|O_NOCTTY, 0)) >= 0))
-    {
-      write(fd, buffer, buflen+headerlen);
-      write(fd, "\r\n", 2);
-    }
-  }
-
-  if (sigpipe == 0)
-    sigaction(SIGPIPE, &oldaction, (struct sigaction *) NULL);
-}
-
-void syslog(int priority, const char *format, ...)
-{
-  va_list arg_ptr;
-  va_start(arg_ptr, format);
-  vsyslog(priority, format, arg_ptr);
-  va_end(arg_ptr);
-}
diff --git a/mdk-stage1/dietlibc/libugly/mktime.c b/mdk-stage1/dietlibc/libugly/mktime.c
deleted file mode 100644
index ee4dab6c1..000000000
--- a/mdk-stage1/dietlibc/libugly/mktime.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <time.h>
-
-/* seconds per day */
-#define SPD 24*60*60
-
-extern unsigned int __spm[];
-
-time_t mktime(struct tm *t) {
-  time_t x=0;
-  unsigned int i;
-  if (t->tm_year<70) return (time_t)(-1);
-  for (i=70; i<t->tm_year; ++i) {
-    x+=__isleap(i+1900)?366:365;
-  }
-  t->tm_yday=__spm[t->tm_mon] + t->tm_mday-1 + ((t->tm_mon>2) && __isleap(t->tm_year)?1:0);
-  x+=t->tm_yday;
-  /* x is now the number of days since Jan 1 1970 */
-  t->tm_wday=(4+x)%7;
-  x = x*SPD + t->tm_hour*60*60 + t->tm_min*60 + t->tm_sec;
-  return x;
-}
diff --git a/mdk-stage1/dietlibc/libugly/pclose.c b/mdk-stage1/dietlibc/libugly/pclose.c
deleted file mode 100644
index e33076c19..000000000
--- a/mdk-stage1/dietlibc/libugly/pclose.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <sys/types.h>
-#include <sys/wait.h>
-#include "dietstdio.h"
-
-int pclose(FILE *f) {
-  int status;
-  fclose(f);
-  if (waitpid(f->popen_kludge,&status,0)>=0)
-    return status;
-  return -1;
-}
diff --git a/mdk-stage1/dietlibc/libugly/popen.c b/mdk-stage1/dietlibc/libugly/popen.c
deleted file mode 100644
index e0e441495..000000000
--- a/mdk-stage1/dietlibc/libugly/popen.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#include "dietstdio.h"
-#include <unistd.h>
-
-extern char **environ;
-
-FILE *popen(const char *command, const char *type) {
-  int pfd[2];
-  int fd0;
-  pid_t pid;
-  if (pipe(pfd)<0) return 0;
-  fd0=(*type=='r');
-  if ((pid=vfork())<0) {
-    close(pfd[0]);
-    close(pfd[1]);
-    return 0;
-  }
-  if (!pid) {	/* child */
-    char *argv[]={"sh","-c",0,0};
-    close(pfd[!fd0]); close(fd0);
-    dup2(pfd[fd0],fd0); close(pfd[fd0]);
-    argv[2]=(char*)command;
-    execve("/bin/sh",argv,environ);
-    _exit(255);
-  }
-  close(pfd[fd0]);
-  {
-    register FILE* f;
-    if ((f=fdopen(pfd[!fd0],type)))
-      f->popen_kludge=pid;
-    return f;
-  }
-}
diff --git a/mdk-stage1/dietlibc/libugly/prioritynames.c b/mdk-stage1/dietlibc/libugly/prioritynames.c
deleted file mode 100644
index 87a99b76d..000000000
--- a/mdk-stage1/dietlibc/libugly/prioritynames.c
+++ /dev/null
@@ -1,22 +0,0 @@
-#include <sys/syslog.h>
-
-#ifndef INTERNAL_NOPRI
-#define INTERNAL_NOPRI 0x10
-#endif
-
-CODE prioritynames[] =
-  {
-    { "alert", LOG_ALERT },
-    { "crit", LOG_CRIT },
-    { "debug", LOG_DEBUG },
-    { "emerg", LOG_EMERG },
-    { "err", LOG_ERR },
-    { "error", LOG_ERR },		/* DEPRECATED */
-    { "info", LOG_INFO },
-    { "none", INTERNAL_NOPRI },		/* INTERNAL */
-    { "notice", LOG_NOTICE },
-    { "panic", LOG_EMERG },		/* DEPRECATED */
-    { "warn", LOG_WARNING },		/* DEPRECATED */
-    { "warning", LOG_WARNING },
-    { 0, -1 }
-  };
diff --git a/mdk-stage1/dietlibc/libugly/setenv.c b/mdk-stage1/dietlibc/libugly/setenv.c
deleted file mode 100644
index bf47cdb79..000000000
--- a/mdk-stage1/dietlibc/libugly/setenv.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <string.h>
-#include <stdlib.h>
-
-#include <dietwarning.h>
-link_warning("setenv","setenv calls malloc.  Avoid it in small programs.");
-
-int setenv(const char *name, const char *value, int overwrite) {
-  char *c=malloc(strlen(name)+strlen(value)+3);
-  if (getenv(name)) {
-    if (!overwrite) return 0;
-    unsetenv(name);
-  }
-  strcpy(c,name);
-  strcat(c,"=");
-  strcat(c,value);
-  return putenv(c);
-}
diff --git a/mdk-stage1/dietlibc/libugly/setmntent.c b/mdk-stage1/dietlibc/libugly/setmntent.c
deleted file mode 100644
index a91d3902b..000000000
--- a/mdk-stage1/dietlibc/libugly/setmntent.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdio.h>
-#include <mntent.h>
-
-FILE *setmntent(const char *filename, const char *type) {
-  return fopen(filename,type);
-}
-
diff --git a/mdk-stage1/dietlibc/libugly/strftime.c b/mdk-stage1/dietlibc/libugly/strftime.c
deleted file mode 100644
index b7e750ab1..000000000
--- a/mdk-stage1/dietlibc/libugly/strftime.c
+++ /dev/null
@@ -1,182 +0,0 @@
-#include <sys/types.h>
-#include <time.h>
-
-static char *sweekdays[]={"Sun","Mon","Tue","Wed","Thu","Fri","Sat"};
-static char *weekdays[]={"Sunday","Monday","Tuesday","Wednesday","Thursday","Friday","Saturday"};
-static char *smonths[]={"Jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sep","Oct","Nov","Dec"};
-static char *months[]={"January","February","March","April","May","June","July","August","September","October","November","December"};
-static char *ampm[]={"am","pm","AM","PM"};
-
-static int i2a(char* dest,unsigned int x) {
-  register unsigned int tmp=x;
-  register int len=0;
-  *dest++=tmp/10+'0'; tmp=tmp%10; ++len;
-  *dest++=tmp+'0';
-  return 2;
-}
-
-static int i2as(char* dest,unsigned int x) {
-  int len=i2a(dest,x);
-  if (*dest=='0') *dest=' ';
-  return len;
-}
-
-size_t strftime(char *s, size_t max, const char *format, const struct tm *tm) {
-  char *t=s;
-  const char *src;
-  char buf[5];
-  while (*format) {
-    switch (*format) {
-    case 0: break;
-    case '%':
-      switch (*++format) {
-      case '%': *t='%'; ++t; break;
-      case 'a': src=sweekdays[tm->tm_wday]; goto append;
-      case 'A': src=weekdays[tm->tm_wday]; goto append;
-      case 'h':
-      case 'b': src=smonths[tm->tm_mon]; goto append;
-      case 'B': src=months[tm->tm_mon]; goto append;
-      case 'c': t+=strftime(t,max-(t-s),"%b %a %d %k:%M:%S %Z %Y",tm); break;
-      case 'C': buf[i2a(buf,(tm->tm_year+1900)/100)]=0; src=buf; goto append;
-      case 'd': buf[i2a(buf,tm->tm_mday)]=0; src=buf; goto append;
-      case 'e': buf[i2as(buf,tm->tm_mday)]=0; src=buf; goto append;
-      case 'H': buf[i2a(buf,tm->tm_hour)]=0; src=buf; goto append;
-      case 'I': buf[i2a(buf,tm->tm_hour%12)]=0; src=buf; goto append;
-      case 'j': buf[i2a(buf,tm->tm_yday)]=0; src=buf; goto append;
-      case 'k': buf[i2as(buf,tm->tm_hour)]=0; src=buf; goto append;
-      case 'l': buf[i2as(buf,tm->tm_hour%12)]=0; src=buf; goto append;
-      case 'm': buf[i2a(buf,tm->tm_mon+1)]=0; src=buf; goto append;
-      case 'M': buf[i2a(buf,tm->tm_min)]=0; src=buf; goto append;
-      case 'n': *t='\n'; break;
-      case 'p': src=ampm[tm->tm_hour>11?3:2]; goto append;
-      case 'P': src=ampm[tm->tm_hour>11?1:0]; goto append;
-      case 'r': t+=strftime(t,max-(t-s),"%I:%M:%S %p",tm); break;
-      case 'R': t+=strftime(t,max-(t-s),"%H:%M",tm); break;
-      case 'S': buf[i2a(buf,tm->tm_sec)]=0; src=buf; goto append;
-      case 't': *t='\t'; break;
-      case 'T': t+=strftime(t,max-(t-s),"%H:%M:%S",tm); break;
-      case 'u': buf[i2a(buf,tm->tm_wday?tm->tm_wday:7)]=0; src=buf; goto append;
-      case 'w': buf[i2a(buf,tm->tm_wday)]=0; src=buf; goto append;
-      case 'x': t+=strftime(t,max-(t-s),"%b %a %d",tm); break;
-      case 'X': t+=strftime(t,max-(t-s),"%k:%M:%S",tm); break;
-      case 'y': buf[i2a(buf,tm->tm_year%100)]=0; src=buf; goto append;
-      case 'Y': i2a(buf,(tm->tm_year+1900)/100); buf[i2a(buf+2,(tm->tm_year%100))+2]=0; src=buf; goto append;
-      case 'Z': src="GMT"; goto append; /* hehe */
-append:
-      while (*src && t<s+max) { *t=*src; ++t; ++src; }
-      };
-      break;
-    default:
-      *t=*format; ++t;
-    }
-    ++format;
-    if (t>=s+max) break;
-    continue;
-  }
-  *t=0; return t-s;
-}
-
-
-
-/*
-       %u     The day of the week as a decimal,  range  1  to  7,
-              Monday being 1.  See also %w. (SU)
-
-       %U     The  week  number  of the current year as a decimal
-              number, range 00 to 53,  starting  with  the  first
-              Sunday as the first day of week 01. See also %V and
-              %W.
-
-       %V     The ISO 8601:1988 week number of the  current  year
-              as  a  decimal number, range 01 to 53, where week 1
-              is the first week that has at least 4 days  in  the
-              current  year,  and with Monday as the first day of
-              the week. See also %U and %W. (SU)
-
-       %w     The day of the week as a decimal,  range  0  to  6,
-              Sunday being 0.  See also %u.
-
-       %W     The  week  number  of the current year as a decimal
-              number, range 00 to 53,  starting  with  the  first
-              Monday as the first day of week 01.
-
-       %x     The  preferred  date representation for the current
-              locale without the time.
-
-       %X     The preferred time representation for  the  current
-              locale without the date.
-
-       %y     The  year  as  a  decimal  number without a century
-              (range 00 to 99).
-
-       %Y     The year as a decimal number including the century.
-
-       %z     The time-zone as hour offset from GMT.  Required to
-              emit RFC822-conformant dates (using "%a, %d  %b  %Y
-              %H:%M:%S %z"). (GNU)
-
-       %Z     The time zone or name or abbreviation.
-
-       %+     The date and time in date(1) format. (TZ)
-
-       %%     A literal `%' character.
-
-       Some  conversion  specifiers  can be modified by preceding
-       them by the E or O modifier to indicate that  an  alterna�
-       tive  format should be used.  If the alternative format or
-       specification does not exist for the current  locale,  the
-       behaviour will be as if the unmodified conversion specifi�
-       cation were used. (SU) The Single Unix Specification  men�
-       tions  %Ec,  %EC,  %Ex, %EX, %Ry, %EY, %Od, %Oe, %OH, %OI,
-       %Om, %OM, %OS, %Ou, %OU, %OV, %Ow,  %OW,  %Oy,  where  the
-       effect  of  the  O  modifier is to use alternative numeric
-       symbols (say, roman numerals), and that of the E  modifier
-
-
-
-GNU                       29 March 1999                         3
-
-
-
-
-
-STRFTIME(3)         Linux Programmer's Manual         STRFTIME(3)
-
-
-       is to use a locale-dependent alternative representation.
-
-       The  broken-down time structure tm is defined in <time.h>.
-       See also ctime(3).
-
-
-RETURN VALUE
-       The strftime() function returns the number  of  characters
-       placed  in  the array s, not including the terminating NUL
-       character, provided the string, including the  terminating
-       NUL,  fits.   Otherwise, it returns 0, and the contents of
-       the array is undefined.  (Thus at least since libc  4.4.4;
-       very  old  versions  of  libc,  such  as libc 4.4.1, would
-       return max if the array was too small.)
-
-       Note that the return value 0 does not necessarily indicate
-       an  error; for example, in many locales %p yields an empty
-       string.
-
-ENVIRONMENT
-       The environment variables TZ and LC_TIME are used.
-
-CONFORMING TO
-       ANSI C, SVID 3, ISO 9899.   There  are  strict  inclusions
-       between the set of conversions given in ANSI C (unmarked),
-       those given in the Single Unix Specification (marked  SU),
-       those  given  in Olson's timezone package (marked TZ), and
-       those given in glibc (marked GNU), except that %+  is  not
-       supported  in glibc2. On the other hand glibc2 has several
-       more extensions.  POSIX.1 only refers to ANSI  C;  POSIX.2
-       describes  under  date(1)  several  extensions  that could
-       apply to strftime as well.
-
-SEE ALSO
-       date(1), time(2), ctime(3), setlocale(3), sprintf(3)
-
-*/
diff --git a/mdk-stage1/dietlibc/libugly/strsignal.c b/mdk-stage1/dietlibc/libugly/strsignal.c
deleted file mode 100644
index 54314d2c7..000000000
--- a/mdk-stage1/dietlibc/libugly/strsignal.c
+++ /dev/null
@@ -1,92 +0,0 @@
-#include <signal.h>
-/* F....ng Kernel haeder is damn broken... */
-#ifndef _NSIG
-#define _NSIG 64
-#endif
-#include <asm/signal.h>
-
-char * strsignal(int sig) {
-  if (sig==SIGHUP)
-    return "Hangup";
-  else if (sig==SIGINT)
-    return "Interrupt";
-  else if (sig==SIGQUIT)
-    return "Quit";
-  else if (sig==SIGILL)
-    return "Illegal instruction";
-  else if (sig==SIGTRAP)
-    return "Trace/breakpoint trap";
-  else if (sig==SIGABRT)
-    return "Aborted";
-  else if (sig==SIGFPE)
-    return "Floating point exception";
-  else if (sig==SIGKILL)
-    return "Killed";
-  else if (sig==SIGBUS)
-    return "Bus error";
-  else if (sig==SIGSEGV)
-    return "Segmentation fault";
-  else if (sig==SIGPIPE)
-    return "Broken pipe";
-  else if (sig==SIGALRM)
-    return "Alarm clock";
-  else if (sig==SIGTERM)
-    return "Terminated";
-  else if (sig==SIGURG)
-    return "Urgent I/O condition";
-  else if (sig==SIGSTOP)
-    return "Stopped (signal)";
-  else if (sig==SIGTSTP)
-    return "Stopped";
-  else if (sig==SIGCONT)
-    return "Continue";
-  else if (sig==SIGCHLD)
-    return "Child exited";
-  else if (sig==SIGTTIN)
-    return "Stopped (tty input)";
-  else if (sig==SIGTTOU)
-    return "Stopped (tty output)";
-  else if (sig==SIGIO)
-    return "I/O possible";
-  else if (sig==SIGXCPU)
-    return "CPU time limit exceeded";
-  else if (sig==SIGXFSZ)
-    return "File size limit exceeded";
-  else if (sig==SIGVTALRM)
-    return "Virtual timer expired";
-  else if (sig==SIGPROF)
-    return "Profiling timer expired";
-  else if (sig==SIGWINCH)
-    return "Window changed";
-  else if (sig==SIGUSR1)
-    return "User defined signal 1";
-  else if (sig==SIGUSR2)
-    return "User defined signal 1";
-#ifdef SIGEMT
-  else if (sig==SIGEMT)
-    return "EMT trap";
-#endif
-#ifdef SIGSYS
-  else if (sig==SIGSYS)
-    return "Bad system call";
-#endif
-#ifdef SIGSTKFLT
-  else if (sig==SIGSTKFLT)
-    return "Stack fault";
-#endif
-#ifdef SIGINFO
-  else if (sig==SIGINFO)
-    return "Information request";
-#elif defined(SIGPWR) && (!defined(SIGLOST) || (SIGPWR!=SIGLOST))
-  else if (sig==SIGPWR)
-    return "Power falure";
-#endif
-#ifdef SIGLOST
-  else if (sig==SIGLOST)
-    return "Resource lost";
-#endif
-  else if ((sig>=SIGRTMIN)&&(sig<=SIGRTMAX))
-    return "Real time signal";
-  else
-    return "(unknown signal)";
-}
diff --git a/mdk-stage1/dietlibc/libugly/system.c b/mdk-stage1/dietlibc/libugly/system.c
deleted file mode 100644
index b9eea20eb..000000000
--- a/mdk-stage1/dietlibc/libugly/system.c
+++ /dev/null
@@ -1,69 +0,0 @@
-#include <signal.h>
-#include <asm/errno.h>
-#include <errno.h>
-#include <unistd.h>
-#include "dietwarning.h"
-
-#define SHELL_PATH      "/bin/sh"       /* Path of the shell.  */
-#define SHELL_NAME      "sh"            /* Name to give it.  */
-
-extern char **environ;
-
-int __libc_fork();
-int __libc_waitpid(int pid, int *status, int options);
-int execve(const char*filename, char *const argv[], char *const envp[]);
-void __set_errno(int errno);
-int sigaction(int signum,  const  struct  sigaction  *act, struct sigaction *oldact);
-
-int __libc_system (const char *line)
-{
-  struct sigaction sa, intr, quit;
-  int save,pid,ret=-1;
-
-  if (line == 0) return __libc_system("exit 0") == 0;
-
-  sa.sa_handler = SIG_IGN;
-  sa.sa_flags = 0;
-  sigemptyset (&sa.sa_mask);
-
-  if (sigaction(SIGINT,  &sa, &intr)<0) return -1;
-  if (sigaction(SIGQUIT, &sa, &quit)<0) {
-    save = errno;
-    sigaction (SIGINT, &intr, (struct sigaction*)0);
-    __set_errno (save);
-    return -1;
-  }
-
-  pid=__libc_fork();
-  if (pid>0)
-  { /* parent */
-    int n;
-    do
-      n=__libc_waitpid(pid, &ret, 0);
-    while ((n==-1) && (errno==EINTR));
-    if (n!=pid) ret=-1;
-  }
-  else if (!pid)
-  { /* child */
-    const char *nargs[4];
-    nargs[0] = SHELL_NAME;
-    nargs[1] = "-c";
-    nargs[2] = line;
-    nargs[3] = 0;
-
-    sigaction(SIGINT,  &intr, (struct sigaction*)0);
-    sigaction(SIGQUIT, &quit, (struct sigaction*)0);
-
-    execve(SHELL_PATH,(char *const *)nargs, environ);
-    _exit(127);
-  }
-  save = errno;
-  sigaction (SIGINT,  &intr, (struct sigaction *)0);
-  sigaction (SIGQUIT, &quit, (struct sigaction *)0);
-  __set_errno(save);
-  return ret;
-}
-
-int system (const char *line) __attribute__((weak,alias("__libc_system")));
-
-link_warning("system","warning: system() is a security risk.  Use fork and execvp instead!")
diff --git a/mdk-stage1/dietlibc/libugly/time_table_spd.c b/mdk-stage1/dietlibc/libugly/time_table_spd.c
deleted file mode 100644
index bfe1cf86d..000000000
--- a/mdk-stage1/dietlibc/libugly/time_table_spd.c
+++ /dev/null
@@ -1,17 +0,0 @@
-
-/* seconds per month -- nonleap! */
-const unsigned int __spm[12] =
-  { 0,
-    (31),
-    (31+28),
-    (31+28+31),
-    (31+28+31+30),
-    (31+28+31+30+31),
-    (31+28+31+30+31+30),
-    (31+28+31+30+31+30+31),
-    (31+28+31+30+31+30+31+31),
-    (31+28+31+30+31+30+31+31+30),
-    (31+28+31+30+31+30+31+31+30+31),
-    (31+28+31+30+31+30+31+31+30+31+30),
-  };
-
diff --git a/mdk-stage1/dietlibc/libugly/tzfile.c b/mdk-stage1/dietlibc/libugly/tzfile.c
deleted file mode 100644
index 5702d4bea..000000000
--- a/mdk-stage1/dietlibc/libugly/tzfile.c
+++ /dev/null
@@ -1,86 +0,0 @@
-#include "dietfeatures.h"
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/mman.h>
-#include <netinet/in.h>
-
-#include <stdio.h>
-
-#ifdef WANT_TZFILE_PARSER
-static char *tzfile=0;
-static int tzlen=-1;
-
-void __maplocaltime() {
-  int fd;
-  unsigned int len;
-  if (tzlen>=0) return;
-  tzlen=0;
-  if ((fd=open("/etc/localtime",O_RDONLY))<0) return;
-  len=lseek(fd,0,SEEK_END);
-  if ((tzfile=mmap(0,len,PROT_READ,MAP_SHARED,fd,0))==MAP_FAILED) return;
-  close(fd);
-  if (ntohl(*(int*)tzfile) != 0x545a6966) return;
-  tzlen=len;
-}
-
-char *tzset(void)	__attribute__((weak,alias("__maplocaltime")));
-
-static unsigned long __myntohl(const unsigned char* c) {
-  return (((unsigned long)c[0])<<24) +
-         (((unsigned long)c[1])<<16) +
-         (((unsigned long)c[2])<<8) +
-         ((unsigned long)c[3]);
-}
-
-time_t __tzfile_map(time_t t, int *isdst) {
-  /* "TZif" plus 16 reserved bytes. */
-  char *tmp;
-  int i;
-  int tzh_ttisgmtcnt, tzh_ttisstdcnt, tzh_leapcnt, tzh_timecnt, tzh_typecnt, tzh_charcnt;
-  *isdst=0;
-  if (!tzfile) return t;
-  tzh_ttisgmtcnt=ntohl(*(int*)(tzfile+20));
-  tzh_ttisstdcnt=ntohl(*(int*)(tzfile+24));
-  tzh_leapcnt=ntohl(*(int*)(tzfile+28));
-  tzh_timecnt=ntohl(*(int*)(tzfile+32));
-  tzh_typecnt=ntohl(*(int*)(tzfile+36));
-  tzh_charcnt=ntohl(*(int*)(tzfile+40));
-
-#if 0
-  tmp=tzfile+20+6*4;
-  printf("ttisgmtcnt %d ttisstdcnt %d leapcnt %d timecnt %d typecnt %d charcnt %d\n",tzh_ttisgmtcnt,tzh_ttisstdcnt, tzh_leapcnt, tzh_timecnt, tzh_typecnt, tzh_charcnt);
-  printf("transition times: ");
-  for (i=0; i<tzh_timecnt; ++i) {
-    printf("%s%lu",i?", ":"",ntohl(*(int*)tmp)); tmp+=4;
-  }
-  printf("\n");
-  printf("indices: ");
-  for (i=0; i<tzh_timecnt; ++i) {
-    printf("%s%d",i?", ":"",*tmp); ++tmp;
-  }
-  printf("\n");
-  printf("transition times: ");
-  for (i=0; i<tzh_typecnt; ++i) {
-    printf("%s(%lu,%d,%d)",i?", ":"",ntohl(*(int*)tmp),tmp[4],tmp[5]); tmp+=6;
-  }
-  printf("\n");
-#endif
-
-  tmp=tzfile+20+6*4;
-  for (i=0; i<tzh_timecnt; ++i)
-    if ((time_t)__myntohl(tmp+i*4) >= t) {
-/*      printf("match at %d\n",i); */
-      tmp+=tzh_timecnt*4;
-      i=tmp[i-1];
-/*      printf("using index %d\n",i); */
-      tmp+=tzh_timecnt;
-      tmp+=i*6;
-/*      printf("(%lu,%d,%d)\n",ntohl(*(int*)tmp),tmp[4],tmp[5]); */
-      *isdst=tmp[4];
-      return t+__myntohl(tmp);
-    }
-  return t;
-}
-#else
-void tzset(void)	__attribute__((weak,alias("return0")));
-#endif
diff --git a/mdk-stage1/dietlibc/libugly/unsetenv.c b/mdk-stage1/dietlibc/libugly/unsetenv.c
deleted file mode 100644
index 46e880271..000000000
--- a/mdk-stage1/dietlibc/libugly/unsetenv.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <stdlib.h>
-
-void unsetenv(const char *name) {
-  putenv(name);
-}
-
diff --git a/mdk-stage1/dietlibc/ppc/Makefile.add b/mdk-stage1/dietlibc/ppc/Makefile.add
deleted file mode 100644
index 641cf1ade..000000000
--- a/mdk-stage1/dietlibc/ppc/Makefile.add
+++ /dev/null
@@ -1,3 +0,0 @@
-
-CFLAGS+=-mpowerpc-gpopt -mpowerpc-gfxopt -Os
-VPATH:=ppc:syscalls.s:$(VPATH)
diff --git a/mdk-stage1/dietlibc/ppc/__longjmp.S b/mdk-stage1/dietlibc/ppc/__longjmp.S
deleted file mode 100644
index 8113eeeea..000000000
--- a/mdk-stage1/dietlibc/ppc/__longjmp.S
+++ /dev/null
@@ -1,59 +0,0 @@
-#include <setjmp.h>
-
-
-#ifdef PIC
-#define JUMPTARGET(name) name##@plt
-#else
-#define JUMPTARGET(name) name
-#endif
-
-.global __longjmp
-.type __longjmp,@function
-.align 2
-__longjmp:
-	lwz 1,(JB_GPR1*4)(3)
-	lwz 2,(JB_GPR2*4)(3)
-	lwz 0,(JB_LR*4)(3)
-	lwz 14,((JB_GPRS+0)*4)(3)
-	lfd 14,((JB_FPRS+0*2)*4)(3)
-	lwz 15,((JB_GPRS+1)*4)(3)
-	lfd 15,((JB_FPRS+1*2)*4)(3)
-	lwz 16,((JB_GPRS+2)*4)(3)
-	lfd 16,((JB_FPRS+2*2)*4)(3)
-	lwz 17,((JB_GPRS+3)*4)(3)
-	lfd 17,((JB_FPRS+3*2)*4)(3)
-	lwz 18,((JB_GPRS+4)*4)(3)
-	lfd 18,((JB_FPRS+4*2)*4)(3)
-	lwz 19,((JB_GPRS+5)*4)(3)
-	lfd 19,((JB_FPRS+5*2)*4)(3)
-	lwz 20,((JB_GPRS+6)*4)(3)
-	lfd 20,((JB_FPRS+6*2)*4)(3)
-	mtlr 0
-	lwz 21,((JB_GPRS+7)*4)(3)
-	lfd 21,((JB_FPRS+7*2)*4)(3)
-	lwz 22,((JB_GPRS+8)*4)(3)
-	lfd 22,((JB_FPRS+8*2)*4)(3)
-	lwz 0,(JB_CR*4)(3)
-	lwz 23,((JB_GPRS+9)*4)(3)
-	lfd 23,((JB_FPRS+9*2)*4)(3)
-	lwz 24,((JB_GPRS+10)*4)(3)
-	lfd 24,((JB_FPRS+10*2)*4)(3)
-	lwz 25,((JB_GPRS+11)*4)(3)
-	lfd 25,((JB_FPRS+11*2)*4)(3)
-	mtcrf 0xFF,0
-	lwz 26,((JB_GPRS+12)*4)(3)
-	lfd 26,((JB_FPRS+12*2)*4)(3)
-	lwz 27,((JB_GPRS+13)*4)(3)
-	lfd 27,((JB_FPRS+13*2)*4)(3)
-	lwz 28,((JB_GPRS+14)*4)(3)
-	lfd 28,((JB_FPRS+14*2)*4)(3)
-	lwz 29,((JB_GPRS+15)*4)(3)
-	lfd 29,((JB_FPRS+15*2)*4)(3)
-	lwz 30,((JB_GPRS+16)*4)(3)
-	lfd 30,((JB_FPRS+16*2)*4)(3)
-	lwz 31,((JB_GPRS+17)*4)(3)
-	lfd 31,((JB_FPRS+17*2)*4)(3)
-	mr 3,4
-	blr
-.size __longjmp,.-__longjmp
-
diff --git a/mdk-stage1/dietlibc/ppc/__testandset.S b/mdk-stage1/dietlibc/ppc/__testandset.S
deleted file mode 100644
index a6063fbb2..000000000
--- a/mdk-stage1/dietlibc/ppc/__testandset.S
+++ /dev/null
@@ -1,11 +0,0 @@
-.global __testandset
-.type __testandset,@function
-.align 2
-__testandset:
-	lwarx	5,0,3
-	add	0,4,5
-	stwcx	0,0,3
-	bne	__testandset
-	blr
-.size __testandset,.-__testandset
-
diff --git a/mdk-stage1/dietlibc/ppc/mmap.c b/mdk-stage1/dietlibc/ppc/mmap.c
deleted file mode 100644
index 25d2926b2..000000000
--- a/mdk-stage1/dietlibc/ppc/mmap.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <linux/types.h>
-#include <linux/unistd.h>
-
-int mmap(void*start,size_t length,int prot,int flags,int fd,off_t offset) {
-  unsigned long __sc_ret, __sc_err;
-  {
-    register unsigned long __sc_0 __asm__ ("r0");
-    register unsigned long __sc_3 __asm__ ("r3");
-    register unsigned long __sc_4 __asm__ ("r4");
-    register unsigned long __sc_5 __asm__ ("r5");
-    register unsigned long __sc_6 __asm__ ("r6");
-    register unsigned long __sc_7 __asm__ ("r7");
-    register unsigned long __sc_8 __asm__ ("r8");
-
-    __sc_3 = (unsigned long) (start);
-    __sc_4 = (unsigned long) (length);
-    __sc_5 = (unsigned long) (prot);
-    __sc_6 = (unsigned long) (flags);
-    __sc_7 = (unsigned long) (fd);
-    __sc_8 = (unsigned long) (offset);
-    __sc_0 = __NR_mmap;
-    __asm__ __volatile__
-	    ("sc           \n\t"
-	      "mfcr %1      "
-	    : "=&r" (__sc_3), "=&r" (__sc_0)
-	    : "0"   (__sc_3), "1"   (__sc_0),
-	      "r"   (__sc_4),
-	      "r"   (__sc_5),
-	      "r"   (__sc_6),
-	      "r"   (__sc_7),
-	      "r"   (__sc_8)
-	    : __syscall_clobbers);
-    __sc_ret = __sc_3;
-    __sc_err = __sc_0;
-  }
-  __syscall_return (int);
-}
diff --git a/mdk-stage1/dietlibc/ppc/setjmp.S b/mdk-stage1/dietlibc/ppc/setjmp.S
deleted file mode 100644
index 50fa2bdd4..000000000
--- a/mdk-stage1/dietlibc/ppc/setjmp.S
+++ /dev/null
@@ -1,56 +0,0 @@
-#include <setjmp.h>
-
-#ifdef PIC
-#define JUMPTARGET(name) name##@plt
-#else
-#define JUMPTARGET(name) name
-#endif
-
-.global __sigsetjmp
-.type __sigsetjmp,@function
-.align 2
-__sigsetjmp:
-        stw  1,(JB_GPR1*4)(3)
-        mflr 0
-        stw  2,(JB_GPR2*4)(3)
-        stw  14,((JB_GPRS+0)*4)(3)
-        stfd 14,((JB_FPRS+0*2)*4)(3)
-        stw  0,(JB_LR*4)(3)
-        stw  15,((JB_GPRS+1)*4)(3)
-        stfd 15,((JB_FPRS+1*2)*4)(3)
-        mfcr 0
-        stw  16,((JB_GPRS+2)*4)(3)
-        stfd 16,((JB_FPRS+2*2)*4)(3)
-        stw  0,(JB_CR*4)(3)
-        stw  17,((JB_GPRS+3)*4)(3)
-        stfd 17,((JB_FPRS+3*2)*4)(3)
-        stw  18,((JB_GPRS+4)*4)(3)
-        stfd 18,((JB_FPRS+4*2)*4)(3)
-        stw  19,((JB_GPRS+5)*4)(3)
-        stfd 19,((JB_FPRS+5*2)*4)(3)
-        stw  20,((JB_GPRS+6)*4)(3)
-        stfd 20,((JB_FPRS+6*2)*4)(3)
-        stw  21,((JB_GPRS+7)*4)(3)
-        stfd 21,((JB_FPRS+7*2)*4)(3)
-        stw  22,((JB_GPRS+8)*4)(3)
-        stfd 22,((JB_FPRS+8*2)*4)(3)
-        stw  23,((JB_GPRS+9)*4)(3)
-        stfd 23,((JB_FPRS+9*2)*4)(3)
-        stw  24,((JB_GPRS+10)*4)(3)
-        stfd 24,((JB_FPRS+10*2)*4)(3)
-        stw  25,((JB_GPRS+11)*4)(3)
-        stfd 25,((JB_FPRS+11*2)*4)(3)
-        stw  26,((JB_GPRS+12)*4)(3)
-        stfd 26,((JB_FPRS+12*2)*4)(3)
-        stw  27,((JB_GPRS+13)*4)(3)
-        stfd 27,((JB_FPRS+13*2)*4)(3)
-        stw  28,((JB_GPRS+14)*4)(3)
-        stfd 28,((JB_FPRS+14*2)*4)(3)
-        stw  29,((JB_GPRS+15)*4)(3)
-        stfd 29,((JB_FPRS+15*2)*4)(3)
-        stw  30,((JB_GPRS+16)*4)(3)
-        stfd 30,((JB_FPRS+16*2)*4)(3)
-        stw  31,((JB_GPRS+17)*4)(3)
-        stfd 31,((JB_FPRS+17*2)*4)(3)
-        b JUMPTARGET (__sigjmp_save)
-.size __sigsetjmp,.-__sigsetjmp
diff --git a/mdk-stage1/dietlibc/ppc/start.S b/mdk-stage1/dietlibc/ppc/start.S
deleted file mode 100644
index c7afeecd2..000000000
--- a/mdk-stage1/dietlibc/ppc/start.S
+++ /dev/null
@@ -1,44 +0,0 @@
-#include "start.h"
-
-#ifdef __powerpc__
-
-.text
-.global _start
-.type _start,@function
-_start:
- /* Save the stack pointer, in case we're statically linked under Linux.  */
-	mr      9,1
- /* Set up an initial stack frame, and clear the LR.  */
-	clrrwi  1,1,4
-	li      0,0
-	stwu    1,-16(1)
-	mtlr    0
-	stw     0,0(1)
-
- /* r9 enth�lt den initialen Stackpointer.
-    argc = (r9)
-    argv = (r9+4)
-    envp = argv+(argc+1)*4 */
-
-	lwzu	3,0(9)	/* argc */
-	addi	4,9,4	/* argv */
-	add	5,0,3	/* argc... */
-	addi	5,5,1	/* argc+1...*/
-	slwi	5,5,2	/* (argc+1)*4 */
-	add	5,5,4	/* argv+(argc+1)*4 */
-
-	lis	6,environ@ha
-	stw	5,environ@l(6)
-
-	bl	main
-	b	exit
-.size _start,.-_start
-
-
-/* Define a symbol for the first piece of initialized data.  */
-        .section ".data"
-__data_start:
-
-
-#endif
-
diff --git a/mdk-stage1/dietlibc/ppc/unified.S b/mdk-stage1/dietlibc/ppc/unified.S
deleted file mode 100644
index d2b419f0b..000000000
--- a/mdk-stage1/dietlibc/ppc/unified.S
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <dietfeatures.h>
-
-.text
-.global __unified_syscall
-__unified_syscall:
-	sc
-	mfcr	0
-	andis.	9,0,4096
-	mr	0,3
-	beq	.L1
-#ifdef WANT_THREAD_SAVE
-	bl	__set_errno
-#else
-	lis	9,errno@ha
-	stw	3,errno@l(9)
-#endif
-	li	0,-1
-.L1:
-	mr	3,0
-	blr
-
diff --git a/mdk-stage1/dietlibc/sparc/Makefile.add b/mdk-stage1/dietlibc/sparc/Makefile.add
deleted file mode 100644
index 0de05b1db..000000000
--- a/mdk-stage1/dietlibc/sparc/Makefile.add
+++ /dev/null
@@ -1,3 +0,0 @@
-
-CFLAGS+=-mcpu=supersparc -Os
-VPATH:=sparc:syscalls.s:$(VPATH)
diff --git a/mdk-stage1/dietlibc/sparc/__longjmp.S b/mdk-stage1/dietlibc/sparc/__longjmp.S
deleted file mode 100644
index 72e001a2f..000000000
--- a/mdk-stage1/dietlibc/sparc/__longjmp.S
+++ /dev/null
@@ -1,67 +0,0 @@
-#include <setjmp.h>
-
-#define JB_SP  0
-#define JB_FP  1
-#define JB_PC  2
-
-#define ENV(base,reg) [%base + (reg * 4)]
-#define ST_FLUSH_WINDOWS 3
-#define RW_FP [%fp + 0x48]
-
-.text
-.global __longjmp
-__longjmp:
-	/* Store our arguments in global registers so we can still
-	   use them while unwinding frames and their register windows.  */
-
-	ld ENV(o0,JB_FP), %g3   /* Cache target FP in register %g3.  */
-	mov %o0, %g1            /* ENV in %g1 */
-	orcc %o1, %g0, %g2      /* VAL in %g2 */
-	be,a 0f                 /* Branch if zero; else skip delay slot.  */
-	 mov 1, %g2             /* Delay slot only hit if zero: VAL = 1.  */
-0:
-	xor %fp, %g3, %o0
-	add %fp, 512, %o1
-	andncc %o0, 4095, %o0
-	bne .Lthread
-	 cmp %o1, %g3
-	bl .Lthread
-
-	/* Now we will loop, unwinding the register windows up the stack
-	   until the restored %fp value matches the target value in %g3.  */
-
-.Lloop:
-	cmp %fp, %g3            /* Have we reached the target frame? */
-	bl,a .Lloop             /* Loop while current fp is below target.  */
-	 restore                /* Unwind register window in delay slot.  */
-	be,a .Lfound            /* Better have hit it exactly.  */
-	 ld ENV(g1,JB_SP), %o0  /* Delay slot: extract target SP.  */
-
-.Lthread:
-	/*
-	 * Do a "flush register windows trap".  The trap handler in the
-	 * kernel writes all the register windows to their stack slots, and
-	 * marks them all as invalid (needing to be sucked up from the
-	 * stack when used).  This ensures that all information needed to
-	 * unwind to these callers is in memory, not in the register
-	 * windows.
-	 */
-	ta      ST_FLUSH_WINDOWS
-	ld      ENV(g1,JB_PC), %o7 /* Set return PC. */
-	ld      ENV(g1,JB_SP), %fp /* Set saved SP on restore below. */
-	sub     %fp, 64, %sp    /* Allocate a register frame. */
-	st      %g3, RW_FP      /* Set saved FP on restore below. */
-	retl
-	 restore %g2, 0, %o0    /* Restore values from above register frame. */
-
-.Lfound:
-	/* We have unwound register windows so %fp matches the target.  */
-	mov %o0, %sp            /* OK, install new SP.  */
-
-.Lsp_ok:
-	ld ENV(g1,JB_PC), %o0   /* Extract target return PC.  */
-	jmp %o0 + 8             /* Return there.  */
-	 mov %g2, %o0           /* Delay slot: set return value.  */
-
-.size __longjmp, . - __longjmp
-
diff --git a/mdk-stage1/dietlibc/sparc/__testandset.S b/mdk-stage1/dietlibc/sparc/__testandset.S
deleted file mode 100644
index 84f6cf597..000000000
--- a/mdk-stage1/dietlibc/sparc/__testandset.S
+++ /dev/null
@@ -1,6 +0,0 @@
-.text
-.align 4
-.global __testandset
-__testandset:
-	retl
-	ldstub	[%o0], %o0
diff --git a/mdk-stage1/dietlibc/sparc/clone.S b/mdk-stage1/dietlibc/sparc/clone.S
deleted file mode 100644
index 58b438249..000000000
--- a/mdk-stage1/dietlibc/sparc/clone.S
+++ /dev/null
@@ -1,45 +0,0 @@
-#include <asm/errno.h>
-#include <asm/unistd.h>
-
-.text
-.align 4
-.weak clone
-clone:
-.global __clone
-__clone:
-	save	%sp, -96, %sp
-
-	tst	%i0		/* check for function pointer */
-	be	.Lerror
-	tst	%i1		/* check for stack pointer */
-	be	.Lerror
-	nop
-
-	mov	%i1, %o1	/* child-stack */
-	mov	%i2, %o0	/* clone-flags */
-	mov	__NR_clone, %g1
-	ta	0x10		/* syscall: clone */
-	bcs	.Lerror
-
-	tst	%o1
-	bne	.Lstart		/* we are the child :) */
-	nop
-	mov	%o0, %i0	/* return child pid */
-	ret
-	restore
-
-.Lerror:
-	call	__errno_location
-	nop
-	mov	EINVAL, %l0
-	st	%l0, [%o0]
-	ret
-	restore	%g0, -1, %o0
-
-.Lstart:
-	call	%i0		/* call child-function */
-	mov	%i3, %o0	/* put arg in the right place for the child */
-
-	call	_exit		/* child returned */
-	nop
-
diff --git a/mdk-stage1/dietlibc/sparc/fork.S b/mdk-stage1/dietlibc/sparc/fork.S
deleted file mode 100644
index 869c9b30c..000000000
--- a/mdk-stage1/dietlibc/sparc/fork.S
+++ /dev/null
@@ -1,25 +0,0 @@
-#include "syscalls.h"
-
-.text
-.weak fork
-fork:
-.global __libc_fork
-__libc_fork:
-	mov	2, %g1
-	ta	0x10
-	bcc,a	1f
-	nop
-	save	%sp, -96, %sp
-#ifdef WANT_THREAD_SAVE
-	call	__errno_location
-	nop
-#else
-	sethi	%hi(errno), %o0
-	or	%o0, %lo(errno), %o0
-#endif
-	st	%i0, [ %o0 ]
-	retl
-	restore	%g0, -1, %o0
-1:	dec	%o1
-	retl
-	and	%o0, %o1, %o0
diff --git a/mdk-stage1/dietlibc/sparc/mmap.c b/mdk-stage1/dietlibc/sparc/mmap.c
deleted file mode 100644
index 25ebdc24e..000000000
--- a/mdk-stage1/dietlibc/sparc/mmap.c
+++ /dev/null
@@ -1,43 +0,0 @@
-#include <linux/types.h>
-#include <linux/unistd.h>
-
-#define __SYSCALL_STRING                                                \
-        "ta     0x10;"                                                  \
-        "bcs    2f;"                                                    \
-        " nop;"                                                         \
-        "1:"                                                            \
-        ".subsection 2;"                                                \
-        "2:"                                                            \
-        "save   %%sp, -192, %%sp;"                                      \
-        "call   __errno_location;"                                      \
-        " nop;"                                                         \
-        "st     %%i0,[%%o0];"                                           \
-        "ba     1b;"                                                    \
-        " restore %%g0, -1, %%o0;"                                      \
-        ".previous;"
-
-#define __SYSCALL_CLOBBERS "g2", "g3", "g4", "g5", "g7",                \
-        "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",                 \
-        "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",           \
-        "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",         \
-        "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",         \
-        "cc", "memory"
-
-#define inline_syscall6(name,arg1,arg2,arg3,arg4,arg5,arg6)             \
-({                                                                      \
-        register long __o0 __asm__ ("o0") = (long)(arg1);               \
-        register long __o1 __asm__ ("o1") = (long)(arg2);               \
-        register long __o2 __asm__ ("o2") = (long)(arg3);               \
-        register long __o3 __asm__ ("o3") = (long)(arg4);               \
-        register long __o4 __asm__ ("o4") = (long)(arg5);               \
-        register long __o5 __asm__ ("o5") = (long)(arg6);               \
-        register long __g1 __asm__ ("g1") = __NR_##name;                \
-        __asm__ (__SYSCALL_STRING : "=r" (__g1), "=r" (__o0) :          \
-                 "0" (__g1), "1" (__o0), "r" (__o1), "r" (__o2),        \
-                 "r" (__o3), "r" (__o4), "r" (__o5) :                   \
-                 __SYSCALL_CLOBBERS);                                   \
-        __o0;                                                           \
-})
-int mmap(void*start,size_t length,int prot,int flags,int fd,off_t offset) {
-  return inline_syscall6(mmap,start,length,prot,flags,fd,offset);
-}
diff --git a/mdk-stage1/dietlibc/sparc/pipe.S b/mdk-stage1/dietlibc/sparc/pipe.S
deleted file mode 100644
index 820da2570..000000000
--- a/mdk-stage1/dietlibc/sparc/pipe.S
+++ /dev/null
@@ -1,26 +0,0 @@
-#include "syscalls.h"
-
-.text
-.global pipe
-pipe:
-	mov	%o0, %o2
-	mov	__NR_pipe, %g1
-	ta 0x10
-	bcc,a	1f
-	nop
-	save	%sp, -96, %sp
-#ifdef WANT_THREAD_SAVE
-	call	__errno_location
-	nop
-#else
-	sethi	%hi(errno), %o0
-	or	%o0, %lo(errno), %o0
-#endif
-	st	%i0, [ %o0 ]
-	ret
-	restore	%g0, -1, %o0
-
-1:	st	%o0, [ %o2 ]
-	st	%o1, [ %o2 + 4 ]
-	retl
-	mov	%g0, %o0
diff --git a/mdk-stage1/dietlibc/sparc/setjmp.S b/mdk-stage1/dietlibc/sparc/setjmp.S
deleted file mode 100644
index efc5a7013..000000000
--- a/mdk-stage1/dietlibc/sparc/setjmp.S
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <setjmp.h>
-
-#define JB_SP  0
-#define JB_FP  1
-#define JB_PC  2
-
-#define ST_FLUSH_WINDOWS        0x03
-
-.section	.rodata
-.text
-.globl __setjmp
-__setjmp:
-        b       1f
-         set    0, %o1
-.size __setjmp,.-__setjmp
-
-.globl setjmp
-setjmp:
-        set     1, %o1
-.size setjmp,.-setjmp
-
-.globl __sigsetjmp
-__sigsetjmp:
-1:
-        /* Save our PC, SP and FP.  Save the signal mask if requested with
-           a tail-call for simplicity; it always returns zero.  */
-        ta      ST_FLUSH_WINDOWS
-
-        st      %o7, [%o0 + (JB_PC * 4)]
-        st      %sp, [%o0 + (JB_SP * 4)]
-        st      %fp, [%o0 + (JB_FP * 4)]
-
-        mov     %o7, %g1
-        call    __sigjmp_save
-         mov    %g1, %o7
-.size __sigsetjmp,.-__sigsetjmp
-
diff --git a/mdk-stage1/dietlibc/sparc/shmat.c b/mdk-stage1/dietlibc/sparc/shmat.c
deleted file mode 100644
index 73b2d89a9..000000000
--- a/mdk-stage1/dietlibc/sparc/shmat.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-#include <asm/ipc.h>
-
-extern void* __ipc();
-
-#ifndef PAGE_SIZE
-#define PAGE_SIZE 4096
-#endif
-
-void* shmat(int shmid,const void* shmaddr,int shmflg) {
-  void* raddr;
-  register void* result;
-  result=__ipc(SHMAT,shmid,shmflg,&raddr,shmaddr);
-  if ((unsigned long)result <= -(unsigned long)PAGE_SIZE)
-    result=raddr;
-  return result;
-}
diff --git a/mdk-stage1/dietlibc/sparc/start.S b/mdk-stage1/dietlibc/sparc/start.S
deleted file mode 100644
index e948aaddc..000000000
--- a/mdk-stage1/dietlibc/sparc/start.S
+++ /dev/null
@@ -1,46 +0,0 @@
-#include "start.h"
-
-#ifdef __sparc__
-        .section ".text"
-        .align 4
-        .global _start
-        .type _start,@function
-_start:
-
-  /* Terminate the stack frame, and reserve space for functions to
-     drop their arguments.  */
-        mov     %g0, %fp
-        sub     %sp, 6*4, %sp
-
-  /* Extract the arguments and environment as encoded on the stack.  The
-     argument info starts after one register window (16 words) past the SP.  */
-        ld      [%sp+22*4], %o0
-        add     %sp, 23*4, %o1
-	add	%o1, %o0, %o2
-	add	%o2, %o0, %o2
-	add	%o2, %o0, %o2
-	add	%o2, %o0, %o2
-	add	%o2, 4, %o2
-
-	sethi   %hi(environ), %o3
-	or      %o3, %lo(environ), %o3
-	st	%o2, [%o3]
-
-  /* When starting a binary via the dynamic linker, %g1 contains the
-     address of the shared library termination function, which will be
-     registered with atexit().  If we are statically linked, this will
-     be NULL.  */
-
-  /* Let libc do the rest of the initialization, and call main.  */
-	call	main
-        mov     %g1, %o5
-
-	b	exit
-	mov %o0, %i0
-
-  /* Die very horribly if exit returns.  */
-        unimp
-
-        .size _start, .-_start
-#endif
-
diff --git a/mdk-stage1/dietlibc/sparc/udiv.S b/mdk-stage1/dietlibc/sparc/udiv.S
deleted file mode 100644
index 87479e7bd..000000000
--- a/mdk-stage1/dietlibc/sparc/udiv.S
+++ /dev/null
@@ -1,363 +0,0 @@
-#ifdef __sparc__
-   /* This file is generated from divrem.m4; DO NOT EDIT! */
-/*
- * Division and remainder, from Appendix E of the Sparc Version 8
- * Architecture Manual, with fixes from Gordon Irlam.
- */
-
-/*
- * Input: dividend and divisor in %o0 and %o1 respectively.
- *
- * m4 parameters:
- *  .udiv	name of function to generate
- *  div		div=div => %o0 / %o1; div=rem => %o0 % %o1
- *  false		false=true => signed; false=false => unsigned
- *
- * Algorithm parameters:
- *  N		how many bits per iteration we try to get (4)
- *  WORDSIZE	total number of bits (32)
- *
- * Derived constants:
- *  TOPBITS	number of bits in the top decade of a number
- *
- * Important variables:
- *  Q		the partial quotient under development (initially 0)
- *  R		the remainder so far, initially the dividend
- *  ITER	number of main division loop iterations required;
- *		equal to ceil(log2(quotient) / N).  Note that this
- *		is the log base (2^N) of the quotient.
- *  V		the current comparand, initially divisor*2^(ITER*N-1)
- *
- * Cost:
- *  Current estimate for non-large dividend is
- *	ceil(log2(quotient) / N) * (10 + 7N/2) + C
- *  A large dividend is one greater than 2^(31-TOPBITS) and takes a
- *  different path, as the upper bits of the quotient must be developed
- *  one bit at a time.
- */
-
-
-
-#define C_LABEL(name) name:
-
-#define C_SYMBOL_NAME(name) name
-
-#define ENTRY(name) \
-        .global C_SYMBOL_NAME(name); \
-        .align 4;\
-        C_LABEL(name);\
-        .type name,@function;
-
-#define LOC(name)  . ## L ## name
-
-#define END(name) \
-        .size name, . - name
-
-#define ST_DIV0                 0x02
-
-ENTRY(.udiv)
-
-	! Ready to divide.  Compute size of quotient; scale comparand.
-	orcc	%o1, %g0, %o5
-	bne	1f
-	mov	%o0, %o3
-
-		! Divide by zero trap.  If it returns, return 0 (about as
-		! wrong as possible, but that is what SunOS does...).
-		ta	ST_DIV0
-		retl
-		clr	%o0
-
-1:
-	cmp	%o3, %o5			! if %o1 exceeds %o0, done
-	blu	LOC(got_result)		! (and algorithm fails otherwise)
-	clr	%o2
-	sethi	%hi(1 << (32 - 4 - 1)), %g1
-	cmp	%o3, %g1
-	blu	LOC(not_really_big)
-	clr	%o4
-
-	! Here the dividend is >= 2**(31-N) or so.  We must be careful here,
-	! as our usual N-at-a-shot divide step will cause overflow and havoc.
-	! The number of bits in the result here is N*ITER+SC, where SC <= N.
-	! Compute ITER in an unorthodox manner: know we need to shift V into
-	! the top decade: so do not even bother to compare to R.
-	1:
-		cmp	%o5, %g1
-		bgeu	3f
-		mov	1, %g2
-		sll	%o5, 4, %o5
-		b	1b
-		add	%o4, 1, %o4
-
-	! Now compute %g2.
-	2:	addcc	%o5, %o5, %o5
-		bcc	LOC(not_too_big)
-		add	%g2, 1, %g2
-
-		! We get here if the %o1 overflowed while shifting.
-		! This means that %o3 has the high-order bit set.
-		! Restore %o5 and subtract from %o3.
-		sll	%g1, 4, %g1	! high order bit
-		srl	%o5, 1, %o5		! rest of %o5
-		add	%o5, %g1, %o5
-		b	LOC(do_single_div)
-		sub	%g2, 1, %g2
-
-	LOC(not_too_big):
-	3:	cmp	%o5, %o3
-		blu	2b
-		nop
-		be	LOC(do_single_div)
-		nop
-	/* NB: these are commented out in the V8-Sparc manual as well */
-	/* (I do not understand this) */
-	! %o5 > %o3: went too far: back up 1 step
-	!	srl	%o5, 1, %o5
-	!	dec	%g2
-	! do single-bit divide steps
-	!
-	! We have to be careful here.  We know that %o3 >= %o5, so we can do the
-	! first divide step without thinking.  BUT, the others are conditional,
-	! and are only done if %o3 >= 0.  Because both %o3 and %o5 may have the high-
-	! order bit set in the first step, just falling into the regular
-	! division loop will mess up the first time around.
-	! So we unroll slightly...
-	LOC(do_single_div):
-		subcc	%g2, 1, %g2
-		bl	LOC(end_regular_divide)
-		nop
-		sub	%o3, %o5, %o3
-		mov	1, %o2
-		b	LOC(end_single_divloop)
-		nop
-	LOC(single_divloop):
-		sll	%o2, 1, %o2
-		bl	1f
-		srl	%o5, 1, %o5
-		! %o3 >= 0
-		sub	%o3, %o5, %o3
-		b	2f
-		add	%o2, 1, %o2
-	1:	! %o3 < 0
-		add	%o3, %o5, %o3
-		sub	%o2, 1, %o2
-	2:
-	LOC(end_single_divloop):
-		subcc	%g2, 1, %g2
-		bge	LOC(single_divloop)
-		tst	%o3
-		b,a	LOC(end_regular_divide)
-
-LOC(not_really_big):
-1:
-	sll	%o5, 4, %o5
-	cmp	%o5, %o3
-	bleu	1b
-	addcc	%o4, 1, %o4
-	be	LOC(got_result)
-	sub	%o4, 1, %o4
-
-	tst	%o3	! set up for initial iteration
-LOC(divloop):
-	sll	%o2, 4, %o2
-		! depth 1, accumulated bits 0
-	bl	LOC(1.16)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 2, accumulated bits 1
-	bl	LOC(2.17)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 3, accumulated bits 3
-	bl	LOC(3.19)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 4, accumulated bits 7
-	bl	LOC(4.23)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (7*2+1), %o2
-	
-LOC(4.23):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (7*2-1), %o2
-	
-	
-LOC(3.19):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 4, accumulated bits 5
-	bl	LOC(4.21)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (5*2+1), %o2
-	
-LOC(4.21):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (5*2-1), %o2
-	
-	
-	
-LOC(2.17):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 3, accumulated bits 1
-	bl	LOC(3.17)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 4, accumulated bits 3
-	bl	LOC(4.19)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (3*2+1), %o2
-	
-LOC(4.19):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (3*2-1), %o2
-	
-	
-LOC(3.17):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 4, accumulated bits 1
-	bl	LOC(4.17)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (1*2+1), %o2
-	
-LOC(4.17):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (1*2-1), %o2
-	
-	
-	
-	
-LOC(1.16):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 2, accumulated bits -1
-	bl	LOC(2.15)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 3, accumulated bits -1
-	bl	LOC(3.15)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 4, accumulated bits -1
-	bl	LOC(4.15)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-1*2+1), %o2
-	
-LOC(4.15):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-1*2-1), %o2
-	
-	
-LOC(3.15):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 4, accumulated bits -3
-	bl	LOC(4.13)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-3*2+1), %o2
-	
-LOC(4.13):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-3*2-1), %o2
-	
-	
-	
-LOC(2.15):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 3, accumulated bits -3
-	bl	LOC(3.13)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 4, accumulated bits -5
-	bl	LOC(4.11)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-5*2+1), %o2
-	
-LOC(4.11):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-5*2-1), %o2
-	
-	
-LOC(3.13):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 4, accumulated bits -7
-	bl	LOC(4.9)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-7*2+1), %o2
-	
-LOC(4.9):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-7*2-1), %o2
-	
-	
-	
-	
-	9:
-LOC(end_regular_divide):
-	subcc	%o4, 1, %o4
-	bge	LOC(divloop)
-	tst	%o3
-	bl,a	LOC(got_result)
-	! non-restoring fixup here (one instruction only!)
-	sub	%o2, 1, %o2
-
-
-LOC(got_result):
-
-	retl
-	mov %o2, %o0
-
-END(.udiv)
-
-#endif
diff --git a/mdk-stage1/dietlibc/sparc/umul.S b/mdk-stage1/dietlibc/sparc/umul.S
deleted file mode 100644
index 15038ab2a..000000000
--- a/mdk-stage1/dietlibc/sparc/umul.S
+++ /dev/null
@@ -1,170 +0,0 @@
-#ifdef __sparc__
-/*
- * Unsigned multiply.  Returns %o0 * %o1 in %o1%o0 (i.e., %o1 holds the
- * upper 32 bits of the 64-bit product).
- *
- * This code optimizes short (less than 13-bit) multiplies.  Short
- * multiplies require 25 instruction cycles, and long ones require
- * 45 instruction cycles.
- *
- * On return, overflow has occurred (%o1 is not zero) if and only if
- * the Z condition code is clear, allowing, e.g., the following:
- *
- *	call	.umul
- *	nop
- *	bnz	overflow	(or tnz)
- */
-
-#define C_LABEL(name) name:
-
-#define C_SYMBOL_NAME(name) name
-
-#define ENTRY(name) \
-        .global C_SYMBOL_NAME(name); \
-        .align 4;\
-        C_LABEL(name);\
-        .type name,@function;
-
-#define LOC(name)  . ## L ## name
-
-#define END(name) \
-        .size name, . - name
-
-ENTRY(.umul)
-	or	%o0, %o1, %o4
-	mov	%o0, %y			! multiplier -> Y
-	andncc	%o4, 0xfff, %g0		! test bits 12..31 of *both* args
-	be	LOC(mul_shortway)	! if zero, can do it the short way
-	 andcc	%g0, %g0, %o4		! zero the partial product; clear N & V
-
-	/*
-	 * Long multiply.  32 steps, followed by a final shift step.
-	 */
-	mulscc	%o4, %o1, %o4	! 1
-	mulscc	%o4, %o1, %o4	! 2
-	mulscc	%o4, %o1, %o4	! 3
-	mulscc	%o4, %o1, %o4	! 4
-	mulscc	%o4, %o1, %o4	! 5
-	mulscc	%o4, %o1, %o4	! 6
-	mulscc	%o4, %o1, %o4	! 7
-	mulscc	%o4, %o1, %o4	! 8
-	mulscc	%o4, %o1, %o4	! 9
-	mulscc	%o4, %o1, %o4	! 10
-	mulscc	%o4, %o1, %o4	! 11
-	mulscc	%o4, %o1, %o4	! 12
-	mulscc	%o4, %o1, %o4	! 13
-	mulscc	%o4, %o1, %o4	! 14
-	mulscc	%o4, %o1, %o4	! 15
-	mulscc	%o4, %o1, %o4	! 16
-	mulscc	%o4, %o1, %o4	! 17
-	mulscc	%o4, %o1, %o4	! 18
-	mulscc	%o4, %o1, %o4	! 19
-	mulscc	%o4, %o1, %o4	! 20
-	mulscc	%o4, %o1, %o4	! 21
-	mulscc	%o4, %o1, %o4	! 22
-	mulscc	%o4, %o1, %o4	! 23
-	mulscc	%o4, %o1, %o4	! 24
-	mulscc	%o4, %o1, %o4	! 25
-	mulscc	%o4, %o1, %o4	! 26
-	mulscc	%o4, %o1, %o4	! 27
-	mulscc	%o4, %o1, %o4	! 28
-	mulscc	%o4, %o1, %o4	! 29
-	mulscc	%o4, %o1, %o4	! 30
-	mulscc	%o4, %o1, %o4	! 31
-	mulscc	%o4, %o1, %o4	! 32
-	mulscc	%o4, %g0, %o4	! final shift
-
-	/*
-	 * Normally, with the shift-and-add approach, if both numbers are
-	 * positive you get the correct result.  With 32-bit two's-complement
-	 * numbers, -x is represented as
-	 *
-	 *		  x		    32
-	 *	( 2  -  ------ ) mod 2  *  2
-	 *		   32
-	 *		  2
-	 *
-	 * (the `mod 2' subtracts 1 from 1.bbbb).  To avoid lots of 2^32s,
-	 * we can treat this as if the radix point were just to the left
-	 * of the sign bit (multiply by 2^32), and get
-	 *
-	 *	-x  =  (2 - x) mod 2
-	 *
-	 * Then, ignoring the `mod 2's for convenience:
-	 *
-	 *   x *  y	= xy
-	 *  -x *  y	= 2y - xy
-	 *   x * -y	= 2x - xy
-	 *  -x * -y	= 4 - 2x - 2y + xy
-	 *
-	 * For signed multiplies, we subtract (x << 32) from the partial
-	 * product to fix this problem for negative multipliers (see mul.s).
-	 * Because of the way the shift into the partial product is calculated
-	 * (N xor V), this term is automatically removed for the multiplicand,
-	 * so we don't have to adjust.
-	 *
-	 * But for unsigned multiplies, the high order bit wasn't a sign bit,
-	 * and the correction is wrong.  So for unsigned multiplies where the
-	 * high order bit is one, we end up with xy - (y << 32).  To fix it
-	 * we add y << 32.
-	 */
-#if 0
-	tst	%o1
-	bl,a	1f		! if %o1 < 0 (high order bit = 1),
-	 add	%o4, %o0, %o4	! %o4 += %o0 (add y to upper half)
-1:	rd	%y, %o0		! get lower half of product
-	retl
-	 addcc	%o4, %g0, %o1	! put upper half in place and set Z for %o1==0
-#else
-	/* Faster code from tege@sics.se.  */
-	sra	%o1, 31, %o2	! make mask from sign bit
-	and	%o0, %o2, %o2	! %o2 = 0 or %o0, depending on sign of %o1
-	rd	%y, %o0		! get lower half of product
-	retl
-	 addcc	%o4, %o2, %o1	! add compensation and put upper half in place
-#endif
-
-LOC(mul_shortway):
-	/*
-	 * Short multiply.  12 steps, followed by a final shift step.
-	 * The resulting bits are off by 12 and (32-12) = 20 bit positions,
-	 * but there is no problem with %o0 being negative (unlike above),
-	 * and overflow is impossible (the answer is at most 24 bits long).
-	 */
-	mulscc	%o4, %o1, %o4	! 1
-	mulscc	%o4, %o1, %o4	! 2
-	mulscc	%o4, %o1, %o4	! 3
-	mulscc	%o4, %o1, %o4	! 4
-	mulscc	%o4, %o1, %o4	! 5
-	mulscc	%o4, %o1, %o4	! 6
-	mulscc	%o4, %o1, %o4	! 7
-	mulscc	%o4, %o1, %o4	! 8
-	mulscc	%o4, %o1, %o4	! 9
-	mulscc	%o4, %o1, %o4	! 10
-	mulscc	%o4, %o1, %o4	! 11
-	mulscc	%o4, %o1, %o4	! 12
-	mulscc	%o4, %g0, %o4	! final shift
-
-	/*
-	 * %o4 has 20 of the bits that should be in the result; %y has
-	 * the bottom 12 (as %y's top 12).  That is:
-	 *
-	 *	  %o4		    %y
-	 * +----------------+----------------+
-	 * | -12- |   -20-  | -12- |   -20-  |
-	 * +------(---------+------)---------+
-	 *	   -----result-----
-	 *
-	 * The 12 bits of %o4 left of the `result' area are all zero;
-	 * in fact, all top 20 bits of %o4 are zero.
-	 */
-
-	rd	%y, %o5
-	sll	%o4, 12, %o0	! shift middle bits left 12
-	srl	%o5, 20, %o5	! shift low bits right 20
-	or	%o5, %o0, %o0
-	retl
-	 addcc	%g0, %g0, %o1	! %o1 = zero, and set Z
-
-END(.umul)
-#endif
diff --git a/mdk-stage1/dietlibc/sparc/unified.S b/mdk-stage1/dietlibc/sparc/unified.S
deleted file mode 100644
index 3cd609da5..000000000
--- a/mdk-stage1/dietlibc/sparc/unified.S
+++ /dev/null
@@ -1,28 +0,0 @@
-#include <dietfeatures.h>
-
-.text
-.global __unified_syscall
-__unified_syscall:
-	ta	0x10
-
-	bcc	1f
-	save	%sp, -104, %sp
-
-	neg	%i0, %i0
-1:
-	add	%i0, 0xff, %l2
-	cmp	%l2, 0xfe
-	bgu	2f
-	neg	%i0, %l3
-#ifdef WANT_THREAD_SAVE
-	call	__errno_location
-	nop
-#else
-	sethi	%hi(errno), %o0
-	or	%o0, %lo(errno), %o0
-#endif
-	st	%l3, [ %o0 ]
-	mov	-1, %i0
-2:
-	ret
-	restore
diff --git a/mdk-stage1/dietlibc/sparc/urem.S b/mdk-stage1/dietlibc/sparc/urem.S
deleted file mode 100644
index 943cb7873..000000000
--- a/mdk-stage1/dietlibc/sparc/urem.S
+++ /dev/null
@@ -1,362 +0,0 @@
-#ifdef __sparc__
-   /* This file is generated from divrem.m4; DO NOT EDIT! */
-/*
- * Division and remainder, from Appendix E of the Sparc Version 8
- * Architecture Manual, with fixes from Gordon Irlam.
- */
-
-/*
- * Input: dividend and divisor in %o0 and %o1 respectively.
- *
- * m4 parameters:
- *  .urem	name of function to generate
- *  rem		rem=div => %o0 / %o1; rem=rem => %o0 % %o1
- *  false		false=true => signed; false=false => unsigned
- *
- * Algorithm parameters:
- *  N		how many bits per iteration we try to get (4)
- *  WORDSIZE	total number of bits (32)
- *
- * Derived constants:
- *  TOPBITS	number of bits in the top decade of a number
- *
- * Important variables:
- *  Q		the partial quotient under development (initially 0)
- *  R		the remainder so far, initially the dividend
- *  ITER	number of main division loop iterations required;
- *		equal to ceil(log2(quotient) / N).  Note that this
- *		is the log base (2^N) of the quotient.
- *  V		the current comparand, initially divisor*2^(ITER*N-1)
- *
- * Cost:
- *  Current estimate for non-large dividend is
- *	ceil(log2(quotient) / N) * (10 + 7N/2) + C
- *  A large dividend is one greater than 2^(31-TOPBITS) and takes a
- *  different path, as the upper bits of the quotient must be developed
- *  one bit at a time.
- */
-
-
-
-#define C_LABEL(name) name:
-
-#define C_SYMBOL_NAME(name) name
-
-#define ENTRY(name) \
-        .global C_SYMBOL_NAME(name); \
-        .align 4;\
-        C_LABEL(name);\
-        .type name,@function;
-
-#define LOC(name)  . ## L ## name
-
-#define END(name) \
-        .size name, . - name
-
-#define ST_DIV0                 0x02
-
-ENTRY(.urem)
-
-	! Ready to divide.  Compute size of quotient; scale comparand.
-	orcc	%o1, %g0, %o5
-	bne	1f
-	mov	%o0, %o3
-
-		! Divide by zero trap.  If it returns, return 0 (about as
-		! wrong as possible, but that is what SunOS does...).
-		ta	ST_DIV0
-		retl
-		clr	%o0
-
-1:
-	cmp	%o3, %o5			! if %o1 exceeds %o0, done
-	blu	LOC(got_result)		! (and algorithm fails otherwise)
-	clr	%o2
-	sethi	%hi(1 << (32 - 4 - 1)), %g1
-	cmp	%o3, %g1
-	blu	LOC(not_really_big)
-	clr	%o4
-
-	! Here the dividend is >= 2**(31-N) or so.  We must be careful here,
-	! as our usual N-at-a-shot divide step will cause overflow and havoc.
-	! The number of bits in the result here is N*ITER+SC, where SC <= N.
-	! Compute ITER in an unorthodox manner: know we need to shift V into
-	! the top decade: so do not even bother to compare to R.
-	1:
-		cmp	%o5, %g1
-		bgeu	3f
-		mov	1, %g2
-		sll	%o5, 4, %o5
-		b	1b
-		add	%o4, 1, %o4
-
-	! Now compute %g2.
-	2:	addcc	%o5, %o5, %o5
-		bcc	LOC(not_too_big)
-		add	%g2, 1, %g2
-
-		! We get here if the %o1 overflowed while shifting.
-		! This means that %o3 has the high-order bit set.
-		! Restore %o5 and subtract from %o3.
-		sll	%g1, 4, %g1	! high order bit
-		srl	%o5, 1, %o5		! rest of %o5
-		add	%o5, %g1, %o5
-		b	LOC(do_single_div)
-		sub	%g2, 1, %g2
-
-	LOC(not_too_big):
-	3:	cmp	%o5, %o3
-		blu	2b
-		nop
-		be	LOC(do_single_div)
-		nop
-	/* NB: these are commented out in the V8-Sparc manual as well */
-	/* (I do not understand this) */
-	! %o5 > %o3: went too far: back up 1 step
-	!	srl	%o5, 1, %o5
-	!	dec	%g2
-	! do single-bit divide steps
-	!
-	! We have to be careful here.  We know that %o3 >= %o5, so we can do the
-	! first divide step without thinking.  BUT, the others are conditional,
-	! and are only done if %o3 >= 0.  Because both %o3 and %o5 may have the high-
-	! order bit set in the first step, just falling into the regular
-	! division loop will mess up the first time around.
-	! So we unroll slightly...
-	LOC(do_single_div):
-		subcc	%g2, 1, %g2
-		bl	LOC(end_regular_divide)
-		nop
-		sub	%o3, %o5, %o3
-		mov	1, %o2
-		b	LOC(end_single_divloop)
-		nop
-	LOC(single_divloop):
-		sll	%o2, 1, %o2
-		bl	1f
-		srl	%o5, 1, %o5
-		! %o3 >= 0
-		sub	%o3, %o5, %o3
-		b	2f
-		add	%o2, 1, %o2
-	1:	! %o3 < 0
-		add	%o3, %o5, %o3
-		sub	%o2, 1, %o2
-	2:
-	LOC(end_single_divloop):
-		subcc	%g2, 1, %g2
-		bge	LOC(single_divloop)
-		tst	%o3
-		b,a	LOC(end_regular_divide)
-
-LOC(not_really_big):
-1:
-	sll	%o5, 4, %o5
-	cmp	%o5, %o3
-	bleu	1b
-	addcc	%o4, 1, %o4
-	be	LOC(got_result)
-	sub	%o4, 1, %o4
-
-	tst	%o3	! set up for initial iteration
-LOC(divloop):
-	sll	%o2, 4, %o2
-		! depth 1, accumulated bits 0
-	bl	LOC(1.16)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 2, accumulated bits 1
-	bl	LOC(2.17)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 3, accumulated bits 3
-	bl	LOC(3.19)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 4, accumulated bits 7
-	bl	LOC(4.23)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (7*2+1), %o2
-	
-LOC(4.23):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (7*2-1), %o2
-	
-	
-LOC(3.19):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 4, accumulated bits 5
-	bl	LOC(4.21)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (5*2+1), %o2
-	
-LOC(4.21):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (5*2-1), %o2
-	
-	
-	
-LOC(2.17):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 3, accumulated bits 1
-	bl	LOC(3.17)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 4, accumulated bits 3
-	bl	LOC(4.19)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (3*2+1), %o2
-	
-LOC(4.19):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (3*2-1), %o2
-	
-	
-LOC(3.17):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 4, accumulated bits 1
-	bl	LOC(4.17)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (1*2+1), %o2
-	
-LOC(4.17):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (1*2-1), %o2
-	
-	
-	
-	
-LOC(1.16):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 2, accumulated bits -1
-	bl	LOC(2.15)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 3, accumulated bits -1
-	bl	LOC(3.15)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 4, accumulated bits -1
-	bl	LOC(4.15)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-1*2+1), %o2
-	
-LOC(4.15):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-1*2-1), %o2
-	
-	
-LOC(3.15):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 4, accumulated bits -3
-	bl	LOC(4.13)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-3*2+1), %o2
-	
-LOC(4.13):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-3*2-1), %o2
-	
-	
-	
-LOC(2.15):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 3, accumulated bits -3
-	bl	LOC(3.13)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-			! depth 4, accumulated bits -5
-	bl	LOC(4.11)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-5*2+1), %o2
-	
-LOC(4.11):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-5*2-1), %o2
-	
-	
-LOC(3.13):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-			! depth 4, accumulated bits -7
-	bl	LOC(4.9)
-	srl	%o5,1,%o5
-	! remainder is positive
-	subcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-7*2+1), %o2
-	
-LOC(4.9):
-	! remainder is negative
-	addcc	%o3,%o5,%o3
-		b	9f
-		add	%o2, (-7*2-1), %o2
-	
-	
-	
-	
-	9:
-LOC(end_regular_divide):
-	subcc	%o4, 1, %o4
-	bge	LOC(divloop)
-	tst	%o3
-	bl,a	LOC(got_result)
-	! non-restoring fixup here (one instruction only!)
-	add	%o3, %o1, %o3
-
-
-LOC(got_result):
-
-	retl
-	mov %o3, %o0
-
-END(.urem)
-#endif
diff --git a/mdk-stage1/dietlibc/start.h b/mdk-stage1/dietlibc/start.h
deleted file mode 100644
index 7f9e6be28..000000000
--- a/mdk-stage1/dietlibc/start.h
+++ /dev/null
@@ -1,14 +0,0 @@
-.section ".bss"
-.align 8
-
-.weak errno
-errno:
-.global __errno
-__errno:
-	.long 0
-
-.weak environ
-environ:
-.global __environ
-__environ:
-	.long 0
diff --git a/mdk-stage1/dietlibc/syscalls.c/_llseek.c b/mdk-stage1/dietlibc/syscalls.c/_llseek.c
deleted file mode 100644
index fdf49eba5..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/_llseek.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <unistd.h>
-#include <sys/types.h>
-#include "syscalls.h"
-
-_syscall5(int,_llseek,uint,fd,ulong,hi,ulong,lo,loff_t*,res,uint,wh);
diff --git a/mdk-stage1/dietlibc/syscalls.c/_newselect.c b/mdk-stage1/dietlibc/syscalls.c/_newselect.c
deleted file mode 100644
index cb42193bd..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/_newselect.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <linux/types.h>
-#include <linux/time.h>
-#include "syscalls.h"
-
-_syscall5(int,_newselect,int,n,fd_set *,rd,fd_set *,wr,fd_set *,ex,struct timeval *,timeval);
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/access.c b/mdk-stage1/dietlibc/syscalls.c/access.c
deleted file mode 100644
index 80944733a..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/access.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,access,const char*,pathname,int,mode)
diff --git a/mdk-stage1/dietlibc/syscalls.c/chdir.c b/mdk-stage1/dietlibc/syscalls.c/chdir.c
deleted file mode 100644
index a679f528d..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/chdir.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,chdir,void*,path)
diff --git a/mdk-stage1/dietlibc/syscalls.c/chmod.c b/mdk-stage1/dietlibc/syscalls.c/chmod.c
deleted file mode 100644
index 80ad33b40..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/chmod.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,chmod,const char * ,path,mode_t,mode)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/chown.c b/mdk-stage1/dietlibc/syscalls.c/chown.c
deleted file mode 100644
index 5a9352684..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/chown.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,chown,char*,path,uid_t,owner,gid_t,group)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/chroot.c b/mdk-stage1/dietlibc/syscalls.c/chroot.c
deleted file mode 100644
index ab39f7ebe..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/chroot.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,chroot,void*,path)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/clone.c b/mdk-stage1/dietlibc/syscalls.c/clone.c
deleted file mode 100644
index 985eee4c8..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/clone.c
+++ /dev/null
@@ -1 +0,0 @@
-#warning "No CLONE support yet"
diff --git a/mdk-stage1/dietlibc/syscalls.c/close.c b/mdk-stage1/dietlibc/syscalls.c/close.c
deleted file mode 100644
index a7d7f0076..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/close.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,close,int,fd)
diff --git a/mdk-stage1/dietlibc/syscalls.c/dup.c b/mdk-stage1/dietlibc/syscalls.c/dup.c
deleted file mode 100644
index 9c28f0bd6..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/dup.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,dup,int,fd)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/dup2.c b/mdk-stage1/dietlibc/syscalls.c/dup2.c
deleted file mode 100644
index 399314aa8..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/dup2.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,dup2,int,one,int,two)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/execve.c b/mdk-stage1/dietlibc/syscalls.c/execve.c
deleted file mode 100644
index c2bac0117..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/execve.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,execve,const char *,fn,void *,argv,void *,envp)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/exit.c b/mdk-stage1/dietlibc/syscalls.c/exit.c
deleted file mode 100644
index 87087c939..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/exit.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,exit,int,exitcode)
diff --git a/mdk-stage1/dietlibc/syscalls.c/fchdir.c b/mdk-stage1/dietlibc/syscalls.c/fchdir.c
deleted file mode 100644
index b3a41dc7a..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/fchdir.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,fchdir,int,fd)
diff --git a/mdk-stage1/dietlibc/syscalls.c/fchmod.c b/mdk-stage1/dietlibc/syscalls.c/fchmod.c
deleted file mode 100644
index 09e52b6c7..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/fchmod.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,fchmod,int,filedes,mode_t,mode)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/fchown.c b/mdk-stage1/dietlibc/syscalls.c/fchown.c
deleted file mode 100644
index 58923a137..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/fchown.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,fchown,int,fd,uid_t,owner,gid_t,group)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/fcntl.c b/mdk-stage1/dietlibc/syscalls.c/fcntl.c
deleted file mode 100644
index b21be9531..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/fcntl.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,fcntl,int,fd,int,cmd,long,arg)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/flock.c b/mdk-stage1/dietlibc/syscalls.c/flock.c
deleted file mode 100644
index 6fcb336ef..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/flock.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,flock,int,fd,int,op)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/fork.c b/mdk-stage1/dietlibc/syscalls.c/fork.c
deleted file mode 100644
index 1d4b892b6..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/fork.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "syscalls.h"
-
-#ifndef __sparc__
-
-_syscall0(int,fork)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.c/fsync.c b/mdk-stage1/dietlibc/syscalls.c/fsync.c
deleted file mode 100644
index db6198b8a..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/fsync.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,fsync,int,fd)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/ftruncate.c b/mdk-stage1/dietlibc/syscalls.c/ftruncate.c
deleted file mode 100644
index 5f002a899..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/ftruncate.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <sys/types.h>
-#include "syscalls.h"
-
-_syscall2(int,ftruncate,int,fd,off_t,length)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getcwd.c b/mdk-stage1/dietlibc/syscalls.c/getcwd.c
deleted file mode 100644
index 9e5e4a3e2..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getcwd.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-
-/* this syscall exists since Linux 2.1.92 */
-
-_syscall2(int,getcwd,char*,buf,unsigned long,size)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getdents.c b/mdk-stage1/dietlibc/syscalls.c/getdents.c
deleted file mode 100644
index be941b21e..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getdents.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int, getdents, unsigned int, fd, void *, dirp, unsigned int, count);
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/getegid.c b/mdk-stage1/dietlibc/syscalls.c/getegid.c
deleted file mode 100644
index 3213d640c..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getegid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall0(gid_t,getegid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/geteuid.c b/mdk-stage1/dietlibc/syscalls.c/geteuid.c
deleted file mode 100644
index 5b31a3cca..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/geteuid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall0(uid_t,geteuid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getgid.c b/mdk-stage1/dietlibc/syscalls.c/getgid.c
deleted file mode 100644
index 2f7d96286..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getgid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall0(gid_t,getgid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getgroups.c b/mdk-stage1/dietlibc/syscalls.c/getgroups.c
deleted file mode 100644
index 3e4d6797a..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getgroups.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,getgroups,int,size,int*,list)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getpgid.c b/mdk-stage1/dietlibc/syscalls.c/getpgid.c
deleted file mode 100644
index 0b4ff528b..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getpgid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall1(pid_t,getpgid,pid_t,pid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getpid.c b/mdk-stage1/dietlibc/syscalls.c/getpid.c
deleted file mode 100644
index d60a8db9a..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getpid.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall0(int,getpid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getppid.c b/mdk-stage1/dietlibc/syscalls.c/getppid.c
deleted file mode 100644
index ee87a8eae..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getppid.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall0(int,getppid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getpriority.c b/mdk-stage1/dietlibc/syscalls.c/getpriority.c
deleted file mode 100644
index 6f94bcf42..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getpriority.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,getpriority,int,which,int,who)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/getresgid.c b/mdk-stage1/dietlibc/syscalls.c/getresgid.c
deleted file mode 100644
index 264ec7dce..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getresgid.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-#ifdef __NR_getresgid
-
-_syscall3(int,getresgid,gid_t*,rgid,gid_t*,egid,gid_t*,sgid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.c/getresuid.c b/mdk-stage1/dietlibc/syscalls.c/getresuid.c
deleted file mode 100644
index 74e2daec2..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getresuid.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-#ifdef __getresuid
-
-_syscall3(int,getresuid,uid_t*,ruid,uid_t*,euid,uid_t*,suid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.c/getrlimit.c b/mdk-stage1/dietlibc/syscalls.c/getrlimit.c
deleted file mode 100644
index 635b2baf4..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getrlimit.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,getrlimit,int,resource,void*,rlim)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getrusage.c b/mdk-stage1/dietlibc/syscalls.c/getrusage.c
deleted file mode 100644
index 815d3e617..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getrusage.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,getrusage,int,who,void*,rusage)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getsid.c b/mdk-stage1/dietlibc/syscalls.c/getsid.c
deleted file mode 100644
index 69974c36c..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getsid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall1(pid_t,getsid,pid_t,pid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/gettimeofday.c b/mdk-stage1/dietlibc/syscalls.c/gettimeofday.c
deleted file mode 100644
index 5f4931a0c..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/gettimeofday.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include <linux/time.h>
-#include "syscalls.h"
-
-_syscall2(int,gettimeofday,struct timeval *,tv,void *,tz)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getuid.c b/mdk-stage1/dietlibc/syscalls.c/getuid.c
deleted file mode 100644
index bf38447a6..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getuid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall0(uid_t,getuid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/ioctl.c b/mdk-stage1/dietlibc/syscalls.c/ioctl.c
deleted file mode 100644
index 1612109d3..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/ioctl.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,ioctl,int,fd,int,request,void *,argp)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/kill.c b/mdk-stage1/dietlibc/syscalls.c/kill.c
deleted file mode 100644
index e56b0ac1b..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/kill.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,kill,pid_t,pid,int,sig)
diff --git a/mdk-stage1/dietlibc/syscalls.c/lchown.c b/mdk-stage1/dietlibc/syscalls.c/lchown.c
deleted file mode 100644
index 976d2ee1f..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/lchown.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,lchown,char*,path,uid_t,owner,gid_t,group)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/link.c b/mdk-stage1/dietlibc/syscalls.c/link.c
deleted file mode 100644
index ab9b427d9..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/link.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,link,const char *,a,const char *,b)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/lseek.c b/mdk-stage1/dietlibc/syscalls.c/lseek.c
deleted file mode 100644
index 9925a2185..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/lseek.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(unsigned long,lseek,int,fd,unsigned long,offset,int,whence)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/mkdir.c b/mdk-stage1/dietlibc/syscalls.c/mkdir.c
deleted file mode 100644
index aac682c99..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/mkdir.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,mkdir,void*,path,mode_t,mode)
diff --git a/mdk-stage1/dietlibc/syscalls.c/mknod.c b/mdk-stage1/dietlibc/syscalls.c/mknod.c
deleted file mode 100644
index 00e836b73..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/mknod.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,mknod,const char*,pathname,mode_t,mode,dev_t,dev)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/mount.c b/mdk-stage1/dietlibc/syscalls.c/mount.c
deleted file mode 100644
index 2d71ee812..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/mount.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall5(int,mount,const char *,spec,const char *,dir,const char *,type,unsigned long,rwflag,const void *,data);
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/mprotect.c b/mdk-stage1/dietlibc/syscalls.c/mprotect.c
deleted file mode 100644
index 634a12089..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/mprotect.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,mprotect,const void *,addr, size_t, len, int, prot)
diff --git a/mdk-stage1/dietlibc/syscalls.c/mremap.c b/mdk-stage1/dietlibc/syscalls.c/mremap.c
deleted file mode 100644
index 37d066bac..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/mremap.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall4(int,mremap,void*,old_address,size_t,old_size,size_t,new_size,unsigned long,flags)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/munmap.c b/mdk-stage1/dietlibc/syscalls.c/munmap.c
deleted file mode 100644
index 40bc98270..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/munmap.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,munmap,void*,start,size_t,len)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/nanosleep.c b/mdk-stage1/dietlibc/syscalls.c/nanosleep.c
deleted file mode 100644
index 71aca1f09..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/nanosleep.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include <linux/time.h>
-#include "syscalls.h"
-
-_syscall2(int,nanosleep,struct timeval *,in,struct timeval *,out)
diff --git a/mdk-stage1/dietlibc/syscalls.c/open.c b/mdk-stage1/dietlibc/syscalls.c/open.c
deleted file mode 100644
index 8b3ccfcc3..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/open.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,open,const char *,fn,int,flags,mode_t,mode)
diff --git a/mdk-stage1/dietlibc/syscalls.c/pipe.c b/mdk-stage1/dietlibc/syscalls.c/pipe.c
deleted file mode 100644
index 42197c881..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/pipe.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall1(int,pipe,int *,filedes)
diff --git a/mdk-stage1/dietlibc/syscalls.c/poll.c b/mdk-stage1/dietlibc/syscalls.c/poll.c
deleted file mode 100644
index 10d0d1f78..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/poll.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,poll,void *,ufds,int,nfds,int,timeout)
diff --git a/mdk-stage1/dietlibc/syscalls.c/read.c b/mdk-stage1/dietlibc/syscalls.c/read.c
deleted file mode 100644
index f5532054e..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/read.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,read,int,fd,const char *,buf,unsigned long,count)
diff --git a/mdk-stage1/dietlibc/syscalls.c/readlink.c b/mdk-stage1/dietlibc/syscalls.c/readlink.c
deleted file mode 100644
index 482f8fe27..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/readlink.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-#include <linux/types.h>
-
-_syscall3(int,readlink,char*,path,char*,buf,size_t,bufsiz)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/reboot.c b/mdk-stage1/dietlibc/syscalls.c/reboot.c
deleted file mode 100644
index 0ad474894..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/reboot.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,reboot,int,magic,int,magic_too,int,flag)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/rename.c b/mdk-stage1/dietlibc/syscalls.c/rename.c
deleted file mode 100644
index f86d50728..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/rename.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,rename,char*,oldpath,char*,newpath)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/rmdir.c b/mdk-stage1/dietlibc/syscalls.c/rmdir.c
deleted file mode 100644
index 303885264..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/rmdir.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,rmdir,void*,path)
diff --git a/mdk-stage1/dietlibc/syscalls.c/setdomainname.c b/mdk-stage1/dietlibc/syscalls.c/setdomainname.c
deleted file mode 100644
index 83d3aa8b8..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setdomainname.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,setdomainname,const char *,name,int,len)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/setgid.c b/mdk-stage1/dietlibc/syscalls.c/setgid.c
deleted file mode 100644
index 1f7263aeb..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setgid.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,setgid,int,gid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/setgroups.c b/mdk-stage1/dietlibc/syscalls.c/setgroups.c
deleted file mode 100644
index fed3b85c1..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setgroups.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,setgroups,int,size,const int*,list)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/sethostname.c b/mdk-stage1/dietlibc/syscalls.c/sethostname.c
deleted file mode 100644
index e4b736f87..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/sethostname.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,sethostname,const char *,name,int,len)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/setitimer.c b/mdk-stage1/dietlibc/syscalls.c/setitimer.c
deleted file mode 100644
index 28935cab7..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setitimer.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,setitimer,int,which,void *,value,void *,ovalue)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/setpgid.c b/mdk-stage1/dietlibc/syscalls.c/setpgid.c
deleted file mode 100644
index 66fbf82dd..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setpgid.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,setpgid,int,name,int,len)
diff --git a/mdk-stage1/dietlibc/syscalls.c/setpriority.c b/mdk-stage1/dietlibc/syscalls.c/setpriority.c
deleted file mode 100644
index bc04227d2..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setpriority.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,setpriority,int,which,int,who,int,prio)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/setregid.c b/mdk-stage1/dietlibc/syscalls.c/setregid.c
deleted file mode 100644
index c6911aca8..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setregid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,setregid,gid_t,rgid,gid_t,egid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/setresgid.c b/mdk-stage1/dietlibc/syscalls.c/setresgid.c
deleted file mode 100644
index 817fd2942..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setresgid.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-#ifdef __NR_setresgid
-
-_syscall3(int,setresgid,gid_t*,rgid,gid_t*,egid,gid_t*,sgid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.c/setresuid.c b/mdk-stage1/dietlibc/syscalls.c/setresuid.c
deleted file mode 100644
index 7073d8ac2..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setresuid.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-#ifdef __NR_setresuid
-
-_syscall3(int,setresuid,uid_t*,ruid,uid_t*,euid,uid_t*,suid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.c/setreuid.c b/mdk-stage1/dietlibc/syscalls.c/setreuid.c
deleted file mode 100644
index c0c23a12d..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setreuid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,setreuid,uid_t,ruid,uid_t,euid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/setrlimit.c b/mdk-stage1/dietlibc/syscalls.c/setrlimit.c
deleted file mode 100644
index 213234282..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setrlimit.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,setrlimit,int,resource,void*,rlim)
diff --git a/mdk-stage1/dietlibc/syscalls.c/setsid.c b/mdk-stage1/dietlibc/syscalls.c/setsid.c
deleted file mode 100644
index 4b35a1316..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setsid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall0(pid_t,setsid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/setuid.c b/mdk-stage1/dietlibc/syscalls.c/setuid.c
deleted file mode 100644
index 620876c9f..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setuid.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,setuid,int,uid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/sigaction.c b/mdk-stage1/dietlibc/syscalls.c/sigaction.c
deleted file mode 100644
index cfa5c683f..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/sigaction.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,sigaction,int,signum,void*,act,void*,oldact)
diff --git a/mdk-stage1/dietlibc/syscalls.c/signal.c b/mdk-stage1/dietlibc/syscalls.c/signal.c
deleted file mode 100644
index 1a913be45..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/signal.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,signal,int,num,void *,len)
diff --git a/mdk-stage1/dietlibc/syscalls.c/sigpending.c b/mdk-stage1/dietlibc/syscalls.c/sigpending.c
deleted file mode 100644
index 08fb23991..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/sigpending.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,sigpending,void*,set)
diff --git a/mdk-stage1/dietlibc/syscalls.c/sigprocmask.c b/mdk-stage1/dietlibc/syscalls.c/sigprocmask.c
deleted file mode 100644
index e9dcc2d67..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/sigprocmask.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,sigprocmask,int,how,void*,set,void*,oldset)
diff --git a/mdk-stage1/dietlibc/syscalls.c/sigsuspend.c b/mdk-stage1/dietlibc/syscalls.c/sigsuspend.c
deleted file mode 100644
index 0fe90e623..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/sigsuspend.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,sigsuspend,void*,mask)
diff --git a/mdk-stage1/dietlibc/syscalls.c/socketcall.c b/mdk-stage1/dietlibc/syscalls.c/socketcall.c
deleted file mode 100644
index eee1ae86d..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/socketcall.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,socketcall,int,code,unsigned long *, args)
diff --git a/mdk-stage1/dietlibc/syscalls.c/swapoff.c b/mdk-stage1/dietlibc/syscalls.c/swapoff.c
deleted file mode 100644
index e1daa89a9..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/swapoff.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,swapoff,const char *,fn)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/swapon.c b/mdk-stage1/dietlibc/syscalls.c/swapon.c
deleted file mode 100644
index 543e41e79..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/swapon.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,swapon,const char*,path,int,swapflags)
diff --git a/mdk-stage1/dietlibc/syscalls.c/symlink.c b/mdk-stage1/dietlibc/syscalls.c/symlink.c
deleted file mode 100644
index b3f4d0b1c..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/symlink.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,symlink,const char *,a,const char *,b)
diff --git a/mdk-stage1/dietlibc/syscalls.c/sync.c b/mdk-stage1/dietlibc/syscalls.c/sync.c
deleted file mode 100644
index cca17461f..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/sync.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall0(int,sync)
diff --git a/mdk-stage1/dietlibc/syscalls.c/syslog.c b/mdk-stage1/dietlibc/syscalls.c/syslog.c
deleted file mode 100644
index aace870ea..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/syslog.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,syslog,int, type, char *, buf, int, len);
diff --git a/mdk-stage1/dietlibc/syscalls.c/time.c b/mdk-stage1/dietlibc/syscalls.c/time.c
deleted file mode 100644
index dc15b28f9..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/time.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall1(time_t,time,time_t*,path)
diff --git a/mdk-stage1/dietlibc/syscalls.c/truncate.c b/mdk-stage1/dietlibc/syscalls.c/truncate.c
deleted file mode 100644
index 721bd7134..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/truncate.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,truncate,const char*,path,off_t,length)
diff --git a/mdk-stage1/dietlibc/syscalls.c/umask.c b/mdk-stage1/dietlibc/syscalls.c/umask.c
deleted file mode 100644
index 506038243..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/umask.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall1(int,umask,mode_t,mask)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/umount.c b/mdk-stage1/dietlibc/syscalls.c/umount.c
deleted file mode 100644
index 4d3ef7637..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/umount.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,umount,const char *,dir)
diff --git a/mdk-stage1/dietlibc/syscalls.c/uname.c b/mdk-stage1/dietlibc/syscalls.c/uname.c
deleted file mode 100644
index 68f135007..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/uname.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall1(int,uname,void *,utsname)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/unlink.c b/mdk-stage1/dietlibc/syscalls.c/unlink.c
deleted file mode 100644
index 860ccebbf..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/unlink.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,unlink,const char *,fn)
diff --git a/mdk-stage1/dietlibc/syscalls.c/utime.c b/mdk-stage1/dietlibc/syscalls.c/utime.c
deleted file mode 100644
index 185bdf9e8..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/utime.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,utime,void*,filename,void*,buf)
diff --git a/mdk-stage1/dietlibc/syscalls.c/vhangup.c b/mdk-stage1/dietlibc/syscalls.c/vhangup.c
deleted file mode 100644
index bb0669765..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/vhangup.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall0(int,vhangup)
diff --git a/mdk-stage1/dietlibc/syscalls.c/wait4.c b/mdk-stage1/dietlibc/syscalls.c/wait4.c
deleted file mode 100644
index 4ae7eabcd..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/wait4.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall4(int,wait4,pid_t,pid,int *,status,int,opts,void *,rusage)
diff --git a/mdk-stage1/dietlibc/syscalls.c/waitpid.c b/mdk-stage1/dietlibc/syscalls.c/waitpid.c
deleted file mode 100644
index b7167f9ce..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/waitpid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,waitpid,int,pid,int *,status,int,options)
diff --git a/mdk-stage1/dietlibc/syscalls.c/write.c b/mdk-stage1/dietlibc/syscalls.c/write.c
deleted file mode 100644
index d1f7347d5..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/write.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,write,int,fd,const char *,buf,unsigned long,count)
diff --git a/mdk-stage1/dietlibc/syscalls.h b/mdk-stage1/dietlibc/syscalls.h
deleted file mode 100644
index eba7a3c00..000000000
--- a/mdk-stage1/dietlibc/syscalls.h
+++ /dev/null
@@ -1,142 +0,0 @@
-#ifdef __ASSEMBLER__
-
-#include <asm/unistd.h>
-
-#else
-
-#include <linux/unistd.h>
-
-#endif
-
-#ifdef __i386__
-
-#define syscall_weak(name,wsym,sym) \
-.text; \
-.weak wsym; \
-wsym: ; \
-.global sym; \
-sym: \
-	movb $__NR_##name,%al; \
-	jmp __unified_syscall
-
-#define syscall(name,sym) \
-.text; \
-.global sym; \
-sym: \
-	movb $__NR_##name,%al; \
-	jmp __unified_syscall
-
-#endif
-
-#ifdef __sparc__
-
-#define syscall_weak(name,wsym,sym) \
-.text; \
-.weak wsym; \
-wsym: ; \
-.global sym; \
-sym: \
-	b __unified_syscall; \
-	mov __NR_##name, %g1
-
-#define syscall(name,sym) \
-.text; \
-.global sym; \
-sym: \
-	b __unified_syscall; \
-	mov __NR_##name, %g1
-
-#endif
-
-#ifdef __powerpc__
-
-#define syscall_weak(name,wsym,sym) \
-.text; \
-.weak wsym; \
-wsym: ; \
-.global sym; \
-sym: \
-	li	0,__NR_##name; \
-	b __unified_syscall
-
-#define syscall(name,sym) \
-.text; \
-.global sym; \
-sym: \
-	li	0,__NR_##name; \
-	b __unified_syscall
-
-#endif
-
-
-#ifdef __mips__
-
-#define syscall_weak(name,wsym,sym) \
-.text; \
-.weak wsym; \
-wsym: ; \
-.global sym; \
-.ent sym; \
-sym: \
-	li	$2,__NR_##name; \
-	la	$25,__unified_syscall; \
-	jr	$25; \
-.end sym
-
-#define syscall(name,sym) \
-.text; \
-.global sym; \
-.ent sym; \
-sym: \
-	li	$2,__NR_##name; \
-	la	$25,__unified_syscall; \
-	jr	$25; \
-.end sym
-
-#endif
-
-#ifdef __arm__
-
-#define syscall_weak(name,wsym,sym) \
-.text; \
-.weak wsym; \
-wsym: ; \
-.global sym; \
-sym: \
-	swi	__NR_##name; \
-	b	__unified_syscall
-
-#define syscall(name,sym) \
-.text; \
-.global sym; \
-sym: \
-	swi	__NR_##name; \
-	b	__unified_syscall
-
-#endif
-
-
-#ifdef __alpha__
-
-#define syscall_weak(name,wsym,sym) \
-.text ; \
-.align 2 ; \
-.weak wsym; \
-.type wsym,@function ; \
-wsym: ; \
-.global sym ; \
-.type sym,@function ; \
-sym: ; \
-        lda     $0, __NR_##name($31) ; \
-        br      __unified_syscall
-
-#define syscall(name,sym) \
-.text ; \
-.align 2 ; \
-.global sym ; \
-.type sym,@function ; \
-sym: ; \
-        lda     $0, __NR_##name($31) ; \
-        br      __unified_syscall
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/__getpagesize.S b/mdk-stage1/dietlibc/syscalls.s/__getpagesize.S
deleted file mode 100644
index c9fd97898..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/__getpagesize.S
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __NR_getpagesize
-syscall(getpagesize,getpagesize)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/__pread.S b/mdk-stage1/dietlibc/syscalls.s/__pread.S
deleted file mode 100644
index ad47c7873..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/__pread.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(pread,__pread,__libc__pread)
diff --git a/mdk-stage1/dietlibc/syscalls.s/__reboot.S b/mdk-stage1/dietlibc/syscalls.s/__reboot.S
deleted file mode 100644
index 0de4f25b2..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/__reboot.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(reboot,__reboot)
diff --git a/mdk-stage1/dietlibc/syscalls.s/_llseek.S b/mdk-stage1/dietlibc/syscalls.s/_llseek.S
deleted file mode 100644
index 3e240d822..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/_llseek.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(_llseek,_llseek)
diff --git a/mdk-stage1/dietlibc/syscalls.s/access.S b/mdk-stage1/dietlibc/syscalls.s/access.S
deleted file mode 100644
index d1edafd8c..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/access.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(access,access)
diff --git a/mdk-stage1/dietlibc/syscalls.s/brk.S b/mdk-stage1/dietlibc/syscalls.s/brk.S
deleted file mode 100644
index 6e21810bd..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/brk.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(brk,__diet_brk)
diff --git a/mdk-stage1/dietlibc/syscalls.s/chdir.S b/mdk-stage1/dietlibc/syscalls.s/chdir.S
deleted file mode 100644
index 204f3dd6c..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/chdir.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(chdir,chdir)
diff --git a/mdk-stage1/dietlibc/syscalls.s/chmod.S b/mdk-stage1/dietlibc/syscalls.s/chmod.S
deleted file mode 100644
index c1b85f5a4..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/chmod.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(chmod,chmod)
diff --git a/mdk-stage1/dietlibc/syscalls.s/chown.S b/mdk-stage1/dietlibc/syscalls.s/chown.S
deleted file mode 100644
index daac3bf13..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/chown.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(chown,chown)
diff --git a/mdk-stage1/dietlibc/syscalls.s/chroot.S b/mdk-stage1/dietlibc/syscalls.s/chroot.S
deleted file mode 100644
index 65de1e473..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/chroot.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(chroot,chroot)
diff --git a/mdk-stage1/dietlibc/syscalls.s/close.S b/mdk-stage1/dietlibc/syscalls.s/close.S
deleted file mode 100644
index 361ca5272..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/close.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(close,close,__libc_close)
diff --git a/mdk-stage1/dietlibc/syscalls.s/dup.S b/mdk-stage1/dietlibc/syscalls.s/dup.S
deleted file mode 100644
index b2977fd43..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/dup.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(dup,dup)
diff --git a/mdk-stage1/dietlibc/syscalls.s/dup2.S b/mdk-stage1/dietlibc/syscalls.s/dup2.S
deleted file mode 100644
index 774bfbfe7..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/dup2.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(dup2,dup2)
diff --git a/mdk-stage1/dietlibc/syscalls.s/execve.S b/mdk-stage1/dietlibc/syscalls.s/execve.S
deleted file mode 100644
index ff952ae7d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/execve.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(execve,execve)
diff --git a/mdk-stage1/dietlibc/syscalls.s/exit.S b/mdk-stage1/dietlibc/syscalls.s/exit.S
deleted file mode 100644
index 11c989529..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/exit.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(exit,exit,_exit)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fchdir.S b/mdk-stage1/dietlibc/syscalls.s/fchdir.S
deleted file mode 100644
index 0aeaf610b..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fchdir.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(fchdir,fchdir)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fchmod.S b/mdk-stage1/dietlibc/syscalls.s/fchmod.S
deleted file mode 100644
index 30bc2e210..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fchmod.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(fchmod,fchmod)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fchown.S b/mdk-stage1/dietlibc/syscalls.s/fchown.S
deleted file mode 100644
index bc2a296ea..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fchown.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(fchown,fchown)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fcntl.S b/mdk-stage1/dietlibc/syscalls.s/fcntl.S
deleted file mode 100644
index 2285929a0..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fcntl.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(fcntl,fcntl,__libc_fcntl)
diff --git a/mdk-stage1/dietlibc/syscalls.s/flock.S b/mdk-stage1/dietlibc/syscalls.s/flock.S
deleted file mode 100644
index 7b4daeff7..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/flock.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(flock,flock)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fork.S b/mdk-stage1/dietlibc/syscalls.s/fork.S
deleted file mode 100644
index b40c3f708..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fork.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(fork,fork,__libc_fork)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fstat.S b/mdk-stage1/dietlibc/syscalls.s/fstat.S
deleted file mode 100644
index 9dd465cda..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fstat.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(fstat,fstat)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fstat64.S b/mdk-stage1/dietlibc/syscalls.s/fstat64.S
deleted file mode 100644
index 0c7a41609..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fstat64.S
+++ /dev/null
@@ -1,8 +0,0 @@
-#include "dietfeatures.h"
-#include "syscalls.h"
-
-#ifdef WANT_LARGEFILE_BACKCOMPAT
-syscall(fstat64,__dietlibc_fstat64)
-#else
-syscall(fstat64,fstat64)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/fstatfs.S b/mdk-stage1/dietlibc/syscalls.s/fstatfs.S
deleted file mode 100644
index a23c8770c..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fstatfs.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(fstatfs,fstatfs)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fsync.S b/mdk-stage1/dietlibc/syscalls.s/fsync.S
deleted file mode 100644
index 66af59ef9..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fsync.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(fsync,fsync,__libc_fsync)
diff --git a/mdk-stage1/dietlibc/syscalls.s/ftruncate.S b/mdk-stage1/dietlibc/syscalls.s/ftruncate.S
deleted file mode 100644
index dde57a615..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/ftruncate.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(ftruncate,ftruncate)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getcwd.S b/mdk-stage1/dietlibc/syscalls.s/getcwd.S
deleted file mode 100644
index e13262f20..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getcwd.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getcwd,__syscall_getcwd)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getdents.S b/mdk-stage1/dietlibc/syscalls.s/getdents.S
deleted file mode 100644
index f476e939d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getdents.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getdents,getdents)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getdents64.S b/mdk-stage1/dietlibc/syscalls.s/getdents64.S
deleted file mode 100644
index 16859addf..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getdents64.S
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __NR_getdents64
-syscall(getdents64,getdents64)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/getegid.S b/mdk-stage1/dietlibc/syscalls.s/getegid.S
deleted file mode 100644
index 64843ee35..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getegid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getegid,getegid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/geteuid.S b/mdk-stage1/dietlibc/syscalls.s/geteuid.S
deleted file mode 100644
index 55dc00981..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/geteuid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(geteuid,geteuid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getgid.S b/mdk-stage1/dietlibc/syscalls.s/getgid.S
deleted file mode 100644
index 39f092685..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getgid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getgid,getgid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getgroups.S b/mdk-stage1/dietlibc/syscalls.s/getgroups.S
deleted file mode 100644
index b4c57689c..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getgroups.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getgroups,getgroups)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getitimer.S b/mdk-stage1/dietlibc/syscalls.s/getitimer.S
deleted file mode 100644
index 9a2084080..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getitimer.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getitimer,getitimer)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getpgid.S b/mdk-stage1/dietlibc/syscalls.s/getpgid.S
deleted file mode 100644
index e568f060f..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getpgid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getpgid,getpgid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getpid.S b/mdk-stage1/dietlibc/syscalls.s/getpid.S
deleted file mode 100644
index 093884785..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getpid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getpid,getpid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getppid.S b/mdk-stage1/dietlibc/syscalls.s/getppid.S
deleted file mode 100644
index b05e64ae3..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getppid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getppid,getppid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getpriority.S b/mdk-stage1/dietlibc/syscalls.s/getpriority.S
deleted file mode 100644
index 848b27ed7..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getpriority.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getpriority,getpriority)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getresgid.S b/mdk-stage1/dietlibc/syscalls.s/getresgid.S
deleted file mode 100644
index a1d873c15..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getresgid.S
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __NR_getresgid
-
-syscall(getresgid,getresgid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/getresuid.S b/mdk-stage1/dietlibc/syscalls.s/getresuid.S
deleted file mode 100644
index 62f6d764f..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getresuid.S
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __getresuid
-
-syscall(getresuid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/getrlimit.S b/mdk-stage1/dietlibc/syscalls.s/getrlimit.S
deleted file mode 100644
index 1c63c0196..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getrlimit.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getrlimit,getrlimit)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getrusage.S b/mdk-stage1/dietlibc/syscalls.s/getrusage.S
deleted file mode 100644
index 2972c4938..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getrusage.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getrusage,getrusage)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getsid.S b/mdk-stage1/dietlibc/syscalls.s/getsid.S
deleted file mode 100644
index cf5cce9d5..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getsid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getsid,getsid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/gettimeofday.S b/mdk-stage1/dietlibc/syscalls.s/gettimeofday.S
deleted file mode 100644
index f364b787a..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/gettimeofday.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(gettimeofday,gettimeofday)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getuid.S b/mdk-stage1/dietlibc/syscalls.s/getuid.S
deleted file mode 100644
index c53c25a7a..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getuid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getuid,getuid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/ioctl.S b/mdk-stage1/dietlibc/syscalls.s/ioctl.S
deleted file mode 100644
index 463d319dc..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/ioctl.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(ioctl,ioctl)
diff --git a/mdk-stage1/dietlibc/syscalls.s/ioperm.S b/mdk-stage1/dietlibc/syscalls.s/ioperm.S
deleted file mode 100644
index 0acfde07a..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/ioperm.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(ioperm,ioperm)
diff --git a/mdk-stage1/dietlibc/syscalls.s/iopl.S b/mdk-stage1/dietlibc/syscalls.s/iopl.S
deleted file mode 100644
index 06a6c53fb..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/iopl.S
+++ /dev/null
@@ -1,6 +0,0 @@
-
-#include "syscalls.h"
-
-#ifdef __NR_iopl
-syscall(iopl,iopl)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/ipc.S b/mdk-stage1/dietlibc/syscalls.s/ipc.S
deleted file mode 100644
index 40479400d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/ipc.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(ipc,__ipc)
diff --git a/mdk-stage1/dietlibc/syscalls.s/kill.S b/mdk-stage1/dietlibc/syscalls.s/kill.S
deleted file mode 100644
index eb466dd33..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/kill.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(kill,kill)
diff --git a/mdk-stage1/dietlibc/syscalls.s/lchown.S b/mdk-stage1/dietlibc/syscalls.s/lchown.S
deleted file mode 100644
index 19dfefaef..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/lchown.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(lchown,lchown)
diff --git a/mdk-stage1/dietlibc/syscalls.s/link.S b/mdk-stage1/dietlibc/syscalls.s/link.S
deleted file mode 100644
index 8015d11c8..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/link.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(link,link)
diff --git a/mdk-stage1/dietlibc/syscalls.s/llseek.S b/mdk-stage1/dietlibc/syscalls.s/llseek.S
deleted file mode 100644
index 0318b492e..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/llseek.S
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "dietfeatures.h"
-#include "syscalls.h"
-
-#ifdef __NR__llseek
-syscall(_llseek,llseek)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/lseek.S b/mdk-stage1/dietlibc/syscalls.s/lseek.S
deleted file mode 100644
index 93707a22a..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/lseek.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(lseek,lseek,__libc_lseek)
diff --git a/mdk-stage1/dietlibc/syscalls.s/lstat.S b/mdk-stage1/dietlibc/syscalls.s/lstat.S
deleted file mode 100644
index 5720161c0..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/lstat.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(lstat,lstat)
diff --git a/mdk-stage1/dietlibc/syscalls.s/lstat64.S b/mdk-stage1/dietlibc/syscalls.s/lstat64.S
deleted file mode 100644
index 33fd5ab94..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/lstat64.S
+++ /dev/null
@@ -1,8 +0,0 @@
-#include "dietfeatures.h"
-#include "syscalls.h"
-
-#ifdef WANT_LARGEFILE_BACKCOMPAT
-syscall(lstat64,__dietlibc_lstat64)
-#else
-syscall(lstat64,lstat64)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/mkdir.S b/mdk-stage1/dietlibc/syscalls.s/mkdir.S
deleted file mode 100644
index d6214ee46..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/mkdir.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(mkdir,mkdir)
diff --git a/mdk-stage1/dietlibc/syscalls.s/mknod.S b/mdk-stage1/dietlibc/syscalls.s/mknod.S
deleted file mode 100644
index c1b2af12d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/mknod.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(mknod,mknod)
diff --git a/mdk-stage1/dietlibc/syscalls.s/mlockall.S b/mdk-stage1/dietlibc/syscalls.s/mlockall.S
deleted file mode 100644
index 6ad0eef9d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/mlockall.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(mlockall,mlockall)
diff --git a/mdk-stage1/dietlibc/syscalls.s/mount.S b/mdk-stage1/dietlibc/syscalls.s/mount.S
deleted file mode 100644
index 2fd845561..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/mount.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(mount,mount)
diff --git a/mdk-stage1/dietlibc/syscalls.s/mprotect.S b/mdk-stage1/dietlibc/syscalls.s/mprotect.S
deleted file mode 100644
index 73e9a8e17..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/mprotect.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(mprotect,mprotect)
diff --git a/mdk-stage1/dietlibc/syscalls.s/mremap.S b/mdk-stage1/dietlibc/syscalls.s/mremap.S
deleted file mode 100644
index 259ccec99..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/mremap.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(mremap,mremap)
diff --git a/mdk-stage1/dietlibc/syscalls.s/munlockall.S b/mdk-stage1/dietlibc/syscalls.s/munlockall.S
deleted file mode 100644
index 776811dea..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/munlockall.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(munlockall,munlockall)
diff --git a/mdk-stage1/dietlibc/syscalls.s/munmap.S b/mdk-stage1/dietlibc/syscalls.s/munmap.S
deleted file mode 100644
index b43a7b22d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/munmap.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(munmap,munmap)
diff --git a/mdk-stage1/dietlibc/syscalls.s/nanosleep.S b/mdk-stage1/dietlibc/syscalls.s/nanosleep.S
deleted file mode 100644
index 279a52604..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/nanosleep.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(nanosleep,nanosleep,__libc_nanosleep)
diff --git a/mdk-stage1/dietlibc/syscalls.s/nice.S b/mdk-stage1/dietlibc/syscalls.s/nice.S
deleted file mode 100644
index 7d3f740b2..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/nice.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(nice,nice)
diff --git a/mdk-stage1/dietlibc/syscalls.s/open.S b/mdk-stage1/dietlibc/syscalls.s/open.S
deleted file mode 100644
index 280efd0d9..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/open.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(open,open,__libc_open)
diff --git a/mdk-stage1/dietlibc/syscalls.s/pause.S b/mdk-stage1/dietlibc/syscalls.s/pause.S
deleted file mode 100644
index cdf42cabd..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/pause.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(pause,pause,__libc_pause)
diff --git a/mdk-stage1/dietlibc/syscalls.s/personality.S b/mdk-stage1/dietlibc/syscalls.s/personality.S
deleted file mode 100644
index 34b467084..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/personality.S
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __NR_personality
-syscall(personality,personality)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/pipe.S b/mdk-stage1/dietlibc/syscalls.s/pipe.S
deleted file mode 100644
index 03994d055..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/pipe.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(pipe,pipe)
diff --git a/mdk-stage1/dietlibc/syscalls.s/poll.S b/mdk-stage1/dietlibc/syscalls.s/poll.S
deleted file mode 100644
index 359f55ddd..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/poll.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(poll,poll)
diff --git a/mdk-stage1/dietlibc/syscalls.s/ptrace.s b/mdk-stage1/dietlibc/syscalls.s/ptrace.s
deleted file mode 100644
index 392e6a4ed..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/ptrace.s
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(ptrace,ptrace)
diff --git a/mdk-stage1/dietlibc/syscalls.s/pwrite.S b/mdk-stage1/dietlibc/syscalls.s/pwrite.S
deleted file mode 100644
index f52ead7b2..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/pwrite.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(pwrite,__pwrite)
diff --git a/mdk-stage1/dietlibc/syscalls.s/query_module.S b/mdk-stage1/dietlibc/syscalls.s/query_module.S
deleted file mode 100644
index cb2f1d852..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/query_module.S
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __NR_query_module
-syscall(query_module,query_module)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/read.S b/mdk-stage1/dietlibc/syscalls.s/read.S
deleted file mode 100644
index 33fdb7531..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/read.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(read,read,__libc_read)
diff --git a/mdk-stage1/dietlibc/syscalls.s/readlink.S b/mdk-stage1/dietlibc/syscalls.s/readlink.S
deleted file mode 100644
index 850e77c4e..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/readlink.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(readlink,readlink)
diff --git a/mdk-stage1/dietlibc/syscalls.s/readv.S b/mdk-stage1/dietlibc/syscalls.s/readv.S
deleted file mode 100644
index 757c26bfb..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/readv.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(readv,readv)
diff --git a/mdk-stage1/dietlibc/syscalls.s/rename.S b/mdk-stage1/dietlibc/syscalls.s/rename.S
deleted file mode 100644
index f92f1dc5d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/rename.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(rename,rename)
diff --git a/mdk-stage1/dietlibc/syscalls.s/rmdir.S b/mdk-stage1/dietlibc/syscalls.s/rmdir.S
deleted file mode 100644
index 341216e8c..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/rmdir.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(rmdir,rmdir)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S b/mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S
deleted file mode 100644
index caf403672..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_get_priority_max,sched_get_priority_max)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S b/mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S
deleted file mode 100644
index a0c3337dc..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_get_priority_min,sched_get_priority_min)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_getparam.S b/mdk-stage1/dietlibc/syscalls.s/sched_getparam.S
deleted file mode 100644
index 7190a40ae..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_getparam.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_getparam,sched_getparam)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S b/mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S
deleted file mode 100644
index 08709b65e..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_getscheduler,sched_getscheduler)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S b/mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S
deleted file mode 100644
index 150b9a98d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_rr_get_interval,sched_rr_get_interval)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_setparam.S b/mdk-stage1/dietlibc/syscalls.s/sched_setparam.S
deleted file mode 100644
index 3a6dd1dcc..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_setparam.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_setparam,sched_setparam)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S b/mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S
deleted file mode 100644
index 27869d6ce..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_setscheduler,sched_setscheduler)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_yield.S b/mdk-stage1/dietlibc/syscalls.s/sched_yield.S
deleted file mode 100644
index ccb9ac1d0..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_yield.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_yield,sched_yield)
diff --git a/mdk-stage1/dietlibc/syscalls.s/select.S b/mdk-stage1/dietlibc/syscalls.s/select.S
deleted file mode 100644
index f585d0449..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/select.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(select,select)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sendfile.S b/mdk-stage1/dietlibc/syscalls.s/sendfile.S
deleted file mode 100644
index 12d6195dd..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sendfile.S
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "syscalls.h"
-#include "dietwarning.h"
-
-syscall_weak(sendfile,sendfile,__libc_sendfile)
-
-link_warning(sendfile,"sendfile is not portable and does not support large files")
diff --git a/mdk-stage1/dietlibc/syscalls.s/setdomainname.S b/mdk-stage1/dietlibc/syscalls.s/setdomainname.S
deleted file mode 100644
index eaade25da..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setdomainname.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setdomainname,setdomainname)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setgid.S b/mdk-stage1/dietlibc/syscalls.s/setgid.S
deleted file mode 100644
index 69b18a9c9..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setgid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setgid,setgid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setgroups.S b/mdk-stage1/dietlibc/syscalls.s/setgroups.S
deleted file mode 100644
index ce8e800a6..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setgroups.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setgroups,setgroups)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sethostname.S b/mdk-stage1/dietlibc/syscalls.s/sethostname.S
deleted file mode 100644
index 7616d4848..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sethostname.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sethostname,sethostname)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setitimer.S b/mdk-stage1/dietlibc/syscalls.s/setitimer.S
deleted file mode 100644
index bcb0623ba..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setitimer.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setitimer,setitimer)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setpgid.S b/mdk-stage1/dietlibc/syscalls.s/setpgid.S
deleted file mode 100644
index e93db31dc..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setpgid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setpgid,setpgid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setpriority.S b/mdk-stage1/dietlibc/syscalls.s/setpriority.S
deleted file mode 100644
index 57d7bc388..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setpriority.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setpriority,setpriority)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setregid.S b/mdk-stage1/dietlibc/syscalls.s/setregid.S
deleted file mode 100644
index 3a7abbc28..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setregid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setregid,setregid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setresgid.S b/mdk-stage1/dietlibc/syscalls.s/setresgid.S
deleted file mode 100644
index 64cbac94e..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setresgid.S
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __setresgid
-
-syscall(setresgid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/setresuid.S b/mdk-stage1/dietlibc/syscalls.s/setresuid.S
deleted file mode 100644
index 20b6abee9..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setresuid.S
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __setresuid
-
-syscall(setresuid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/setreuid.S b/mdk-stage1/dietlibc/syscalls.s/setreuid.S
deleted file mode 100644
index 33ca8deed..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setreuid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setreuid,setreuid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setrlimit.S b/mdk-stage1/dietlibc/syscalls.s/setrlimit.S
deleted file mode 100644
index 605105658..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setrlimit.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setrlimit,setrlimit)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setsid.S b/mdk-stage1/dietlibc/syscalls.s/setsid.S
deleted file mode 100644
index d1ef1c58e..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setsid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setsid,setsid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setuid.S b/mdk-stage1/dietlibc/syscalls.s/setuid.S
deleted file mode 100644
index d20571cbf..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setuid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setuid,setuid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sigaction.S b/mdk-stage1/dietlibc/syscalls.s/sigaction.S
deleted file mode 100644
index 32382870c..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sigaction.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sigaction,sigaction)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sigaltstack.S b/mdk-stage1/dietlibc/syscalls.s/sigaltstack.S
deleted file mode 100644
index b07d90f40..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sigaltstack.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(sigaltstack,sigaltstack,__sigaltstack)
diff --git a/mdk-stage1/dietlibc/syscalls.s/signal.S b/mdk-stage1/dietlibc/syscalls.s/signal.S
deleted file mode 100644
index 86c4d5db0..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/signal.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(signal,signal)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sigpending.S b/mdk-stage1/dietlibc/syscalls.s/sigpending.S
deleted file mode 100644
index 08715bef5..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sigpending.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sigpending,sigpending)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sigprocmask.S b/mdk-stage1/dietlibc/syscalls.s/sigprocmask.S
deleted file mode 100644
index 07f5b9d26..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sigprocmask.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(sigprocmask,sigprocmask,__sigprocmask)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sigsuspend.S b/mdk-stage1/dietlibc/syscalls.s/sigsuspend.S
deleted file mode 100644
index 062264ab6..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sigsuspend.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(sigsuspend,sigsuspend,__libc_sigsuspend)
diff --git a/mdk-stage1/dietlibc/syscalls.s/socketcall.S b/mdk-stage1/dietlibc/syscalls.s/socketcall.S
deleted file mode 100644
index 5837c049a..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/socketcall.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(socketcall,socketcall)
diff --git a/mdk-stage1/dietlibc/syscalls.s/stat.S b/mdk-stage1/dietlibc/syscalls.s/stat.S
deleted file mode 100644
index 2aa3bc088..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/stat.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(stat,stat)
diff --git a/mdk-stage1/dietlibc/syscalls.s/stat64.S b/mdk-stage1/dietlibc/syscalls.s/stat64.S
deleted file mode 100644
index 734fcab20..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/stat64.S
+++ /dev/null
@@ -1,8 +0,0 @@
-#include "dietfeatures.h"
-#include "syscalls.h"
-
-#ifdef WANT_LARGEFILE_BACKCOMPAT
-syscall(stat64,__dietlibc_stat64)
-#else
-syscall(stat64,stat64)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/statfs.S b/mdk-stage1/dietlibc/syscalls.s/statfs.S
deleted file mode 100644
index 7560f569d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/statfs.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(statfs,statfs)
diff --git a/mdk-stage1/dietlibc/syscalls.s/stime.S b/mdk-stage1/dietlibc/syscalls.s/stime.S
deleted file mode 100644
index 9d9f5bf0a..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/stime.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(stime,stime)
diff --git a/mdk-stage1/dietlibc/syscalls.s/swapoff.S b/mdk-stage1/dietlibc/syscalls.s/swapoff.S
deleted file mode 100644
index f75ec94e0..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/swapoff.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(swapoff,swapoff)
diff --git a/mdk-stage1/dietlibc/syscalls.s/swapon.S b/mdk-stage1/dietlibc/syscalls.s/swapon.S
deleted file mode 100644
index d10594168..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/swapon.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(swapon,swapon)
diff --git a/mdk-stage1/dietlibc/syscalls.s/symlink.S b/mdk-stage1/dietlibc/syscalls.s/symlink.S
deleted file mode 100644
index 07a6a7fdc..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/symlink.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(symlink,symlink)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sync.S b/mdk-stage1/dietlibc/syscalls.s/sync.S
deleted file mode 100644
index 1ee021693..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sync.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sync,sync)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sysctl.S b/mdk-stage1/dietlibc/syscalls.s/sysctl.S
deleted file mode 100644
index 536e62b3d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sysctl.S
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __NR_sysctl
-syscall(sysctl,_sysctl)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/sysinfo.S b/mdk-stage1/dietlibc/syscalls.s/sysinfo.S
deleted file mode 100644
index eaec7941e..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sysinfo.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sysinfo,sysinfo)
diff --git a/mdk-stage1/dietlibc/syscalls.s/syslog.S b/mdk-stage1/dietlibc/syscalls.s/syslog.S
deleted file mode 100644
index 6af3c4eac..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/syslog.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(syslog,__syscall_syslog)
diff --git a/mdk-stage1/dietlibc/syscalls.s/time.S b/mdk-stage1/dietlibc/syscalls.s/time.S
deleted file mode 100644
index 26c79091c..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/time.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(time,time)
diff --git a/mdk-stage1/dietlibc/syscalls.s/times.S b/mdk-stage1/dietlibc/syscalls.s/times.S
deleted file mode 100644
index dcc8a6dd0..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/times.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(times,times)
diff --git a/mdk-stage1/dietlibc/syscalls.s/truncate.S b/mdk-stage1/dietlibc/syscalls.s/truncate.S
deleted file mode 100644
index 7052bdcee..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/truncate.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(truncate,truncate)
diff --git a/mdk-stage1/dietlibc/syscalls.s/umask.S b/mdk-stage1/dietlibc/syscalls.s/umask.S
deleted file mode 100644
index 9f8ffeda6..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/umask.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(umask,umask)
diff --git a/mdk-stage1/dietlibc/syscalls.s/umount.S b/mdk-stage1/dietlibc/syscalls.s/umount.S
deleted file mode 100644
index 4a423d964..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/umount.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(umount,umount)
diff --git a/mdk-stage1/dietlibc/syscalls.s/umount2.S b/mdk-stage1/dietlibc/syscalls.s/umount2.S
deleted file mode 100644
index 4cdd6a200..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/umount2.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(umount2,umount2)
diff --git a/mdk-stage1/dietlibc/syscalls.s/uname.S b/mdk-stage1/dietlibc/syscalls.s/uname.S
deleted file mode 100644
index a460d2aa6..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/uname.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(uname,uname)
diff --git a/mdk-stage1/dietlibc/syscalls.s/unlink.S b/mdk-stage1/dietlibc/syscalls.s/unlink.S
deleted file mode 100644
index bd6713061..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/unlink.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(unlink,unlink)
diff --git a/mdk-stage1/dietlibc/syscalls.s/utime.S b/mdk-stage1/dietlibc/syscalls.s/utime.S
deleted file mode 100644
index 08cd22158..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/utime.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(utime,utime)
diff --git a/mdk-stage1/dietlibc/syscalls.s/vhangup.S b/mdk-stage1/dietlibc/syscalls.s/vhangup.S
deleted file mode 100644
index 6e2d1d343..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/vhangup.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(vhangup,vhangup)
diff --git a/mdk-stage1/dietlibc/syscalls.s/wait4.S b/mdk-stage1/dietlibc/syscalls.s/wait4.S
deleted file mode 100644
index ca6773569..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/wait4.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(wait4,wait4)
diff --git a/mdk-stage1/dietlibc/syscalls.s/waitpid.S b/mdk-stage1/dietlibc/syscalls.s/waitpid.S
deleted file mode 100644
index 5cdc18afb..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/waitpid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(waitpid,waitpid,__libc_waitpid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/write.S b/mdk-stage1/dietlibc/syscalls.s/write.S
deleted file mode 100644
index ba20395df..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/write.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(write,write,__libc_write)
diff --git a/mdk-stage1/dietlibc/syscalls.s/writev.S b/mdk-stage1/dietlibc/syscalls.s/writev.S
deleted file mode 100644
index 8ec7aa6b0..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/writev.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(writev,writev)
diff --git a/mdk-stage1/disk.c b/mdk-stage1/disk.c
deleted file mode 100644
index 8488a767e..000000000
--- a/mdk-stage1/disk.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/mount.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include "stage1.h"
-#include "frontend.h"
-#include "modules.h"
-#include "probing.h"
-#include "log.h"
-#include "mount.h"
-#include "lomount.h"
-#include "automatic.h"
-
-#include "disk.h"
-
-struct partition_detection_anchor {
-	off_t offset;
-	const char * anchor;
-};
-
-static int seek_and_compare(int fd, struct partition_detection_anchor anch)
-{
-	char buf[500];
-	size_t count;
-	if (lseek(fd, anch.offset, SEEK_SET) == (off_t)-1) {
-		log_perror("seek failed");
-		return -1;
-	}
-	count = read(fd, buf, strlen(anch.anchor));
-	if (count != strlen(anch.anchor)) {
-		log_perror("read failed");
-		return -1;
-	}
-	buf[count] = '\0';
-	if (strcmp(anch.anchor, buf))
-		return 1;
-	return 0;
-}
-
-static const char * detect_partition_type(char * dev)
-{
-	struct partition_detection_info {
-		const char * name;
-		struct partition_detection_anchor anchor0;
-		struct partition_detection_anchor anchor1;
-		struct partition_detection_anchor anchor2;
-	};
-	struct partition_detection_info partitions_signatures[] = { 
-		{ "Linux Swap", { 4086, "SWAP-SPACE" }, { 0, NULL }, { 0, NULL } },
-		{ "Linux Swap", { 4086, "SWAPSPACE2" }, { 0, NULL }, { 0, NULL } },
-		{ "Ext2", { 0x438, "\x53\xEF" }, { 0, NULL }, { 0, NULL } },
-		{ "ReiserFS", { 0x10034, "ReIsErFs" }, { 0, NULL }, { 0, NULL } },
-		{ "ReiserFS", { 0x10034, "ReIsEr2Fs" }, { 0, NULL }, { 0, NULL } },
-		{ "XFS", { 0, "XFSB" }, { 0x200, "XAGF" }, { 0x400, "XAGI" } },
-		{ "JFS", { 0x8000, "JFS1" }, { 0, NULL }, { 0, NULL } },
-		{ "NTFS", { 0x1FE, "\x55\xAA" }, { 0x3, "NTFS" }, { 0, NULL } },
-		{ "FAT32", { 0x1FE, "\x55\xAA" }, { 0x52, "FAT32" }, { 0, NULL } },
-		{ "FAT", { 0x1FE, "\x55\xAA" }, { 0x36, "FAT" }, { 0, NULL } },
-		{ "Linux LVM", { 0, "HM\1\0" }, { 0, NULL }, { 0, NULL } }
-	};
-	int partitions_signatures_nb = sizeof(partitions_signatures) / sizeof(struct partition_detection_info);
-	int i;
-	int fd;
-
-	char device_fullname[50];
-	strcpy(device_fullname, "/dev/");
-	strcat(device_fullname, dev);
-
-	if (ensure_dev_exists(device_fullname))
-		return NULL;
-	log_message("guessing type of %s", device_fullname);
-
-	if ((fd = open(device_fullname, O_RDONLY, 0)) < 0) {
-		log_perror("open");
-		return NULL;
-	}
-	
-	for (i=0; i<partitions_signatures_nb; i++) {
-		int results = seek_and_compare(fd, partitions_signatures[i].anchor0);
-		if (results == -1)
-			goto detect_partition_type_end;
-		if (results == 1)
-			continue;
-		if (!partitions_signatures[i].anchor1.anchor)
-			goto detect_partition_found_it;
-
-		results = seek_and_compare(fd, partitions_signatures[i].anchor1);
-		if (results == -1)
-			goto detect_partition_type_end;
-		if (results == 1)
-			continue;
-		if (!partitions_signatures[i].anchor2.anchor)
-			goto detect_partition_found_it;
-
-		results = seek_and_compare(fd, partitions_signatures[i].anchor2);
-		if (results == -1)
-			goto detect_partition_type_end;
-		if (results == 1)
-			continue;
-
-	detect_partition_found_it:
-		return partitions_signatures[i].name;
-	}
-
- detect_partition_type_end:
-	close(fd);
-	return NULL;
-}
-
-static char * disk_extract_list_directory(char * direct)
-{
-	char ** full = list_directory(direct);
-	char tmp[2000] = "";
-	int i;
-	for (i=0; i<5 ; i++) {
-		if (!full || !*full)
-			break;
-		strcat(tmp, *full);
-		strcat(tmp, "\n");
-		full++;
-	}
-	return strdup(tmp);
-}
-
-static enum return_type try_with_device(char *dev_name)
-{
-	char * questions_location[] = { "Directory or ISO image", NULL };
-	char * questions_location_auto[] = { "directory", NULL };
-	static char ** answers_location = NULL;
-	char device_fullname[50];
-	char location_full[500];
-
-	char * disk_own_mount = "/tmp/hdimage";
-
-	int major, minor, blocks;
-	char name[100];
-
-	char buf[512];
-	FILE * f;
-	char * parts[50];
-	char * parts_comments[50];
-	struct stat statbuf;
-	int i = 0;
-	enum return_type results;
-	char * choice;
-
-	if (!(f = fopen("/proc/partitions", "rb")) || !fgets(buf, sizeof(buf), f) || !fgets(buf, sizeof(buf), f)) {
-		log_perror(dev_name);
-		stg1_error_message("Could not read partitions information.");
-		return RETURN_ERROR;
-	}
-
-	while (fgets(buf, sizeof(buf), f)) {
-		bzero(name, sizeof(name));
-		sscanf(buf, " %d %d %d %s", &major, &minor, &blocks, name);
-		if ((strstr(name, dev_name) == name) && (blocks > 1) && (name[strlen(dev_name)] != '\0')) {
-			const char * partition_type = detect_partition_type(name);
-			parts[i] = strdup(name);
-			parts_comments[i] = (char *) malloc(sizeof(char) * 100);
-			sprintf(parts_comments[i], "size: %d Mbytes", blocks >> 10);
-			if (partition_type) {
-				strcat(parts_comments[i], ", type: ");
-				strcat(parts_comments[i], partition_type);
-			}
-			i++;
-		}
-	}
-	parts[i] = NULL;
-	fclose(f);
-
-	if (parts[0] == NULL) {
-		stg1_error_message("No partitions found.");
-		return RETURN_ERROR;
-	}
-
-	results = ask_from_list_comments_auto("Please choose the partition where " DISTRIB_NAME " is copied.",
-					      parts, parts_comments, &choice, "partition", parts);
-	if (results != RETURN_OK)
-		return results;
-
-	strcpy(device_fullname, "/dev/");
-	strcat(device_fullname, choice);
-
-	if (my_mount(device_fullname, disk_own_mount, "ext2", 0) == -1 &&
-	    my_mount(device_fullname, disk_own_mount, "vfat", 0) == -1 &&
-	    my_mount(device_fullname, disk_own_mount, "reiserfs", 0) == -1) {
-		stg1_error_message("I can't find a valid filesystem (tried: ext2, vfat, reiserfs).");
-		return try_with_device(dev_name);
-	}
-
-	if (ask_from_entries_auto("Please enter the directory (or ISO image file) containing the " DISTRIB_NAME " Distribution.",
-				  questions_location, &answers_location, 24, questions_location_auto, NULL) != RETURN_OK) {
-		umount(disk_own_mount);
-		return try_with_device(dev_name);
-	}
-
-	strcpy(location_full, disk_own_mount);
-	strcat(location_full, "/");
-	strcat(location_full, answers_location[0]);
-
-	if (access(location_full, R_OK)) {
-		stg1_error_message("Directory or ISO image file could not be found on partition.\n"
-			      "Here's a short extract of the files in the root of the partition:\n"
-			      "%s", disk_extract_list_directory(disk_own_mount));
-		umount(disk_own_mount);
-		return try_with_device(dev_name);
-	}
-
-	unlink(IMAGE_LOCATION);
-
-	if (!stat(location_full, &statbuf) && !S_ISDIR(statbuf.st_mode)) {
-		log_message("%s exists and is not a directory, assuming this is an ISO image", location_full);
-		if (lomount(location_full, IMAGE_LOCATION)) {
-			stg1_error_message("Could not mount file %s as an ISO image of the " DISTRIB_NAME " Distribution.", answers_location[0]);
-			umount(disk_own_mount);
-			return try_with_device(dev_name);
-		}
-	} else
-		symlink(location_full, IMAGE_LOCATION);
-
-	if (IS_SPECIAL_STAGE2 || ramdisk_possible()) {
-		/* RAMDISK install */
-		if (access(IMAGE_LOCATION RAMDISK_LOCATION, R_OK)) {
-			stg1_error_message("I can't find the " DISTRIB_NAME " Distribution in the specified directory. "
-				      "(I need the subdirectory " RAMDISK_LOCATION ")\n"
-				      "Here's a short extract of the files in the directory:\n"
-				      "%s", disk_extract_list_directory(IMAGE_LOCATION));
-			loumount();
-			umount(disk_own_mount);
-			return try_with_device(dev_name);
-		}
-		if (load_ramdisk() != RETURN_OK) {
-			stg1_error_message("Could not load program into memory.");
-			loumount();
-			umount(disk_own_mount);
-			return try_with_device(dev_name);
-		}
-	} else {
-		/* LIVE install */
-		char p;
-		if (access(IMAGE_LOCATION LIVE_LOCATION, R_OK)) {
-			stg1_error_message("I can't find the " DISTRIB_NAME " Distribution in the specified directory. "
-				      "(I need the subdirectory " LIVE_LOCATION ")\n"
-				      "Here's a short extract of the files in the directory:\n"
-				      "%s", disk_extract_list_directory(IMAGE_LOCATION));
-			loumount();
-			umount(disk_own_mount);
-			return try_with_device(dev_name);
-		}
-		if (readlink(IMAGE_LOCATION LIVE_LOCATION "/usr/bin/runinstall2", &p, 1) != 1) {
-			stg1_error_message("The " DISTRIB_NAME " Distribution seems to be copied on a Windows partition. "
-				      "You need more memory to perform an installation from a Windows partition. "
-				      "Another solution if to copy the " DISTRIB_NAME " Distribution on a Linux partition.");
-			loumount();
-			umount(disk_own_mount);
-			return try_with_device(dev_name);
-		}
-		log_message("found the " DISTRIB_NAME " Installation, good news!");
-	}
-
-	if (IS_RESCUE) {
-		loumount();
-		umount(disk_own_mount);
-	}
-
-	method_name = strdup("disk");
-	return RETURN_OK;
-}
-
-enum return_type disk_prepare(void)
-{
-	char ** medias, ** ptr, ** medias_models;
-	char * choice;
-	int i, count = 0;
-	enum return_type results;
-
-	my_insmod("sd_mod", ANY_DRIVER_TYPE, NULL);
-	
-	get_medias(DISK, &medias, &medias_models);
-
-	ptr = medias;
-	while (ptr && *ptr) {
-		count++;
-		ptr++;
-	}
-
-	if (count == 0) {
-		stg1_error_message("No DISK drive found.");
-		i = ask_insmod(SCSI_ADAPTERS);
-		if (i == RETURN_BACK)
-			return RETURN_BACK;
-		return disk_prepare();
-	}
-
-	if (count == 1) {
-		results = try_with_device(*medias);
-		if (results == RETURN_OK)
-			return RETURN_OK;
-		i = ask_insmod(SCSI_ADAPTERS);
-		if (i == RETURN_BACK)
-			return RETURN_BACK;
-		return disk_prepare();
-	}
-
-	results = ask_from_list_comments_auto("Please choose the DISK drive on which you copied the " DISTRIB_NAME " Distribution.",
-					      medias, medias_models, &choice, "disk", medias);
-
-	if (results != RETURN_OK)
-		return results;
-
-	results = try_with_device(choice);
-	if (results == RETURN_OK)
-		return RETURN_OK;
-	i = ask_insmod(SCSI_ADAPTERS);
-	if (i == RETURN_BACK)
-		return RETURN_BACK;
-	return disk_prepare();
-}
diff --git a/mdk-stage1/disk.h b/mdk-stage1/disk.h
deleted file mode 100644
index 54213cf68..000000000
--- a/mdk-stage1/disk.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _DISK_H_
-#define _DISK_H_
-
-enum return_type disk_prepare(void);
-
-#endif
diff --git a/mdk-stage1/dns.c b/mdk-stage1/dns.c
deleted file mode 100644
index d1e67c78d..000000000
--- a/mdk-stage1/dns.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-
-// dietlibc can do hostname lookup, whereas glibc can't when linked statically :-(
-
-#ifdef __LIBC_DIETLIBC__
-
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <netdb.h>
-#include <sys/socket.h>
-
-#include "network.h"
-#include "log.h"
-
-#include "dns.h"
-
-int mygethostbyname(char * name, struct in_addr * addr)
-{
-	struct hostent * h = gethostbyname(name);
-	if (!h) {
-		if (domain) {
-			// gethostbyname from dietlibc doesn't support domain handling
-			char fully_qualified[500];
-			sprintf(fully_qualified, "%s.%s", name, domain);
-			h = gethostbyname(fully_qualified);
-			if (!h) {
-				log_message("unknown host %s", name);
-				return -1;
-			}
-		} else
-			return -1;
-	}
-	
-	if (h->h_addr_list && (h->h_addr_list)[0]) {
-		memcpy(addr, (h->h_addr_list)[0], sizeof(*addr));
-		log_message("is-at: %s", inet_ntoa(*addr));
-		return 0;
-	}
-	return -1;
-}
-
-char * mygethostbyaddr(char * ipnum)
-{
-	struct in_addr in;
-	struct hostent * host;
-	if (!inet_aton(ipnum, &in))
-		return NULL;
-	host = gethostbyaddr(&in, strlen((void *) &in), AF_INET);
-	if (host && host->h_name)
-		return host->h_name;
-	return NULL;
-}
-
-
-#else // __LIBC_DIETLIBC__
-
-#include <alloca.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <resolv.h>
-#include <arpa/nameser.h>
-#include <arpa/inet.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "log.h"
-
-#include "dns.h"
-
-/* This is dumb, but glibc doesn't like to do hostname lookups w/o libc.so */
-
-union dns_response {
-    HEADER hdr;
-    u_char buf[PACKETSZ];
-} ;
-
-static int do_query(char * query, int queryType, char ** domainName, struct in_addr * ipNum)
-{
-	int len, ancount, type;
-	u_char * data, * end;
-	char name[MAXDNAME];
-	union dns_response response;
-	
-#ifdef __sparc__
-	/* from jj: */
-	/* We have to wait till ethernet negotiation is done */
-	_res.retry = 3;
-#else
-	_res.retry = 2;
-#endif
-
-
-	len = res_search(query, C_IN, queryType, (void *) &response, sizeof(response));
-	if (len <= 0)
-		return -1;
-
-	if (ntohs(response.hdr.rcode) != NOERROR)
-		return -1;
-
-	ancount = ntohs(response.hdr.ancount);
-	if (ancount < 1)
-		return -1;
-	
-	data = response.buf + sizeof(HEADER);
-	end = response.buf + len;
-	
-	/* skip the question */
-	data += dn_skipname(data, end) + QFIXEDSZ;
-
-	/* parse the answer(s) */
-	while (--ancount >= 0 && data < end) {
-
-		/* skip the domain name portion of the RR record */
-		data += dn_skipname(data, end);
-
-		/* get RR information */
-		GETSHORT(type, data);
-		data += INT16SZ; /* skipp class */
-		data += INT32SZ; /* skipp TTL */
-		GETSHORT(len,  data);
-
-		if (type == T_PTR) {
-			/* we got a pointer */
-			len = dn_expand(response.buf, end, data, name, sizeof(name));
-			if (len <= 0) return -1;
-			if (queryType == T_PTR && domainName) {
-				/* we wanted a pointer */
-				*domainName = malloc(strlen(name) + 1);
-				strcpy(*domainName, name);
-				return 0;
-			}
-		} else if (type == T_A) {
-			/* we got an address */
-			if (queryType == T_A && ipNum) {
-				/* we wanted an address */
-				memcpy(ipNum, data, sizeof(*ipNum));
-				return 0;
-			}
-		}
-		
-		/* move ahead to next RR */
-		data += len;
-	} 
-	
-	return -1;
-}
-
-char * mygethostbyaddr(char * ipnum) {
-	int rc;
-	char * result;
-	char * strbuf;
-	char * chptr;
-	char * splits[4];
-	int i;
-
-	_res.retry = 1;
-	
-	strbuf = alloca(strlen(ipnum) + 1);
-	strcpy(strbuf, ipnum);
-	
-	ipnum = alloca(strlen(strbuf) + 20);
-	
-	for (i = 0; i < 4; i++) {
-		chptr = strbuf;
-		while (*chptr && *chptr != '.')
-			chptr++;
-		*chptr = '\0';
-		
-		if (chptr - strbuf > 3) return NULL;
-		splits[i] = strbuf;
-		strbuf = chptr + 1;
-	}
-	
-	sprintf(ipnum, "%s.%s.%s.%s.in-addr.arpa", splits[3], splits[2], splits[1], splits[0]);
-	
-	rc = do_query(ipnum, T_PTR, &result, NULL);
-	
-	if (rc) 
-		return NULL;
-	else
-		return result;
-}
-
-int mygethostbyname(char * name, struct in_addr * addr) {
-	int rc = do_query(name, T_A, NULL, addr);
-	if (!rc)
-		log_message("is-at %s", inet_ntoa(*addr));
-	return rc;
-}
-
-#endif
diff --git a/mdk-stage1/dns.h b/mdk-stage1/dns.h
deleted file mode 100644
index 97af9c08a..000000000
--- a/mdk-stage1/dns.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef H_DNS
-#define H_DNS 
-
-#include <netinet/in.h>
-
-int mygethostbyname(char * name, struct in_addr * addr);
-char * mygethostbyaddr(char * ipnum);
-
-#endif
diff --git a/mdk-stage1/doc/HACKING b/mdk-stage1/doc/HACKING
deleted file mode 100644
index d196c8010..000000000
--- a/mdk-stage1/doc/HACKING
+++ /dev/null
@@ -1,31 +0,0 @@
-If you have to boot pretty often, you'll appreciate to speed the things up
-a little.
-
-Here's what we use: the GRUB feature to boot from the network using the
-DHCP protocol and the TFTP protocol.
-
-Here's the "menu.lst" to do that:
-
--=-=--
-
-timeout 0
-
-title linux
-dhcp
-tftpserver 192.168.1.17
-kernel (nd)/tftpboot/gc/vmlinuz ramdisk=32000 vga=788
-initrd (nd)/tftpboot/gc/network.rdz
-
--=-=--
-
-
-The option "tftpserver" is used to override the tftpserver address given
-as an answer by the DHCP server. That way, you'll not need to bother your
-system administrator to modify his dhcp server configuration.
-
-The directory /tftpboot seems to be the only one defaultly accepted by the
-server, and its subdirs.
-
-
-Of course, your GRUB needs to be compiled with the specific code for your
-network card; use ./configure --help in the GRUB build dir for more infos.
diff --git a/mdk-stage1/doc/README b/mdk-stage1/doc/README
deleted file mode 100644
index 09edce6c2..000000000
--- a/mdk-stage1/doc/README
+++ /dev/null
@@ -1,185 +0,0 @@
--------------------------------------------------------
-*  Stage1 of the Mandrake Linux installation program  *
--------------------------------------------------------
-
-
-[ Author ]
-
-	Guillaume Cottenceau (gc@mandrakesoft.com)
-
-
-[ Copyright ]
-
-	Copyright 2000 MandrakeSoft
-
-	Partially inspired by Redhat stuff (install from 5.x and 7.x) copyright
-	Red Hat Software, and Debian stuff (boot-floppies) copyright by their
-	respective holders.
-
-
-[ Licence ]
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-	
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-	
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
-
-
-	*** WARNING! ***
-
-	This General Public License does not permit incorporating any part
-	of this program as a library into proprietary programs.
-
-
-[ Online ]
-
-	http://us.mandrakesoft.com/~gc/html/stage1.html
-
-
-[ Purpose ]
-
-	This code will take the control of the computer after that Linux
-	kernel booted properly, and will try to run the main installer
-	(also known as "stage 2") from a series of different media
-	including harddrive, cdrom, and network.
-
-	Use the source, Luke.
-
-
-
-
-                -=-=-- Okay, now, more details --=-=-
-
-
-	[ Installing Mandrake Linux ]
-
-Per default, just insert your Mandrake Linux Installation CD into your
-CDROM tray, be sure your system BIOS is configured to boot on your CDROM,
-and that's all.
-
-If you have multiple CDROM drives and the installer can't autodetect in
-which CDROM drive is the disc, it may ask you to choose the correct drive,
-between your CDROM drives.
-
-Also, if you want to install from an SCSI CDROM, the installer should
-detect your SCSI adapter; if it fails you may have to select the right
-driver and/or supply additional parameters.
-
-
-        [ Position of the problem ]
-
-The need for alternate installation methods come with more specific
-hardware configuration and/or need for frequent updates of the Installer
-software.
-
-All of these methods will require to use a special boot disk. The method
-is to download it and then to copy it "physically" to a floppy with the
-command:
-
-# dd if=<boot-disk> of=/dev/fd0
-
-Our boot disks are called "cdrom.img", "network.img", etc.
-
-
-        [ Installation from CDROM ]
-
-The first situation you may encounter is an old BIOS which does not permit
-you to boot from your CDROM drive.
-
-In that case, you'll need to use the "cdrom.img" image file. The steps are
-the same as with CDROM boot, and everything should be automatic.
-
-
-        [ Installation from DISK ]
-
-If you like trying occasionnally our development version, the Cooker, one
-of the easiest way is to grab a local copy of the Distribution on one of
-your local hard drives, and to install from that location.
-
-At present time, you can install from IDE or SCSI drives, from Linux
-(ext2), Windows (vfat) or Reiserfs partition.
-
-In that case, you'll need to use the "hd.img" image file. The dialogs will
-ask you to choose the DISK drive to use to install from, then the
-partition on which you copied the Distribution, then the location
-(directory) in which you copied the Distribution.
-
-
-        [ Installation from NETWORK ]
-
-For convenience, you can also install from a NFS volume, from a FTP
-server, or from a HTTP server. NFS installs are maybe the fastest
-and most convenient possible, so if you need to do frequent and/or
-multiple installs, you may like this option.
-
-In that case, you'll need to use the "network.img" image file. If you have
-PCI network card(s), you'll probably have to only setup your network
-options. If not, you'll have to choose the appropriate driver(s) and/or
-optional parameters. Supported network configurations include static IP
-allocation and DHCP automatic configuration.
-
-
-        [ Installation from PCMCIA ]
-
-If you want to perform an installation on your laptop that is not based on
-local IDE CDROM or DISK, nor on built-in network card, but on PCMCIA
-extension (probably a network adapter or CDROM drive), you'll need the
-"pcmcia.img" image file.
-
-PCMCIA services should automatically start and be transparent to you.
-Then, you'll follow the instructions according to your preferred
-installation method.
-
-
-	[ Monitoring a stage1 session ]
-
-Linux supports virtual consoles. You can switch between them by issueing
-Ctrl+Alt+Fx key, in which 'x' is the number of the console. Here's console
-occupancy during stage1.
-
-(#1) The user-interface of the stage1 is on the first console. In case of
-newt interaction, it's provided with a neat blue and black color scheme,
-and nice widgets. In case of stdio interaction (cdrom and disk installs),
-it's more basic but still usable :-).
-
-(#2) A shell is provided on second console in some cases (you need to
-compile it with -DSPAWN_SHELL and you need to provide a valid shell in the
-initrd) and of course it's not in, in image files of Mandrake Linux
-releases because it's too much diskspace.
-
-(#3) The log is printed out on the third console. This is the location
-where you can find most valuable information, prefixed by a '*'. See
-"log.h" for calls that print things out to the log.
-
-(#4) The kernel messages are printed on the fourth console. There is a
-process forked very early in the init (the program before the stage1)
-which monitors /proc/kmsg for new kernel messages. Also, syslog stuff (the
-logs commited by the programs) should appear on the /dev/log Unix socket,
-this is also printed on this console.
-
-(#5) Former place for the stderr of insmod calls. It's not used anymore.
-
-(#6) Place where a trivial interactive communication with the stage1 is
-set up if the parameter -DSPAWN_INTERACTIVE is compiled in. Basically, you
-can set switches such as "expert" and "rescue" on the fly with this
-feature. It's implemented with a fork and a Unix pipe.
-
-
-        [ Rescueing a system ]
-
-Since Mandrake Linux 7.1, we provide a rescue system through each of the
-previously described methods. You don't need a special "rescue.img" file.
-Just hit "F1" at boot time, type in "rescue", and follow the first steps
-of the installation according to the method you chose (choose
-disks/partitions for disk method, network parameters for network method,
-etc). Then, you'll end up with a workable system, very useful to rescue a
-damaged system, or do other basic actions.
diff --git a/mdk-stage1/doc/TECH-INFOS b/mdk-stage1/doc/TECH-INFOS
deleted file mode 100644
index 074b35d31..000000000
--- a/mdk-stage1/doc/TECH-INFOS
+++ /dev/null
@@ -1,91 +0,0 @@
-
-| (*) Automatic install
-\----------------------
-
-This feature is used to replace redhat kickstart. It uses the kernel
-parameter "automatic" with keywords separated with commas and colons, on
-the following genres:
-
-	automatic=method:nfs,network:static,ip:192.168.1.24,server:192.168.1.7,directory:/stable/i586
-
-	automatic=method:ftp,network:dhcp,server:ftp.ciril.fr,directory:/pub/linux/mandrake-devel/cooker
-
-	automatic=method:ftp,network:dhcp,server:companyserver,directory:/mdkinst,user:XXX,pass:XXX
-
-	automatic=method:ftp,interface:eth1,network:dhcp,...
-
-	automatic=method:ftp,network:adsl,adsluser:XXX,adslpass:XXX,...
-
-	automatic=method:cdrom
-
-	automatic=method:disk,disk:hdb,partition:hdb7
-
-
-The keywords correspond to each "virtual" question answered automatically,
-either from a list or from a free field.
-
-
-Keywords are:
-
-
-`method' <- (nfs,ftp,http,cdrom,disk)
-
-if nfs/ftp/http:
-
-    `network' <- (static,dhcp,adsl)
-
-    if multiple interfaces detected:
-
-        `interface' <- (list-of-detected-interfaces)
-
-    fi
-
-    if static:
-
-        `ip', `dns', `gateway', `netmask' (free fields)
-
-    elsif adsl:
-
-	`adsluser', `adslpass' (free field)
-
-    fi
-
-    if resolving fails:
-
-        `hostname', `domain' (free fields)
-
-    fi   
-
-    `server', `directory' (free fields)
-
-    if ftp:
-
-        `user', `pass' (free fields)
-
-    fi
-
-fi
-
-if disk:
-
-    `disk' <- (list-of-detected-disks)
-
-    `partition' <- (list-of-detected-partitions)
-
-    `directory' (free fields)
-
-fi
-
-
-
-You may use shorter versions of keywords (it helps reducing size of
-commandline), please find each keyword short-alias counterpart in file
-../automatic.c under the identifier named "short_aliases".
-
-This gives for example for:
-
-	automatic=method:nfs,network:static,ip:192.168.1.24,server:192.168.1.7,directory:/stable/i586
-==>
-	automatic=met:nfs,net:static,ip:192.168.1.24,ser:192.168.1.7,dir:/stable/i586
-
-
diff --git a/mdk-stage1/doc/UPDATEMODULES b/mdk-stage1/doc/UPDATEMODULES
deleted file mode 100644
index 89d86d365..000000000
--- a/mdk-stage1/doc/UPDATEMODULES
+++ /dev/null
@@ -1,74 +0,0 @@
-This is the documentation for the "Update Modules" (Update Drivers)
-feature.
-
-This feature aims to propose new modules or replacement modules for the
-install. This is useful when there is a firmware update for a given
-driver, an additional driver needed for something, etc.
-
-
-You must use a floppy disk with e2fs filesystem (NOT vfat/windows
-formatted). Use "mke2fs /dev/fd0" on your own box to format a floppy with
-e2fs filesystem.
-
-This disk may contain a number of kernel modules on the root (e.g. not in
-a subdirectory); some of them may replace existing modules, some of them
-may be added. This disk must contain a special file, named "to_load", on
-the root (not in a subdirectory). This file will contain a series of
-module names, with optional module options; the program will try to load
-all these modules one after another, using file on the floppy if present,
-else using file within standard module repository ("marfile" on the boot
-floppy). It can contain comments, these are strictly defined by the
-presence of a hash (#) character on column 0 of any line.
-
-
-Here's a typical scenario:
-
-
-1. Boot the floppy (or cdrom) with the option "updatemodules"
-
-   (you may do that by pressing F1 then entering "linux updatemodules")
-
-
-2. At the very beginning of the User Interface, you are asked to insert
-   the Update Modules disk. Insert the Update Modules disk and press
-   Enter.
-
---=----=----=----=----=----=----=----=----=--
-Our example disk contains:
-
-[root@obiwan mnt]# ll floppy/
-total 77
-drwxr-xr-x    2 root     root        12288 Jul 26 12:02 lost+found/
--rw-r--r--    1 root     root         9051 Jul 26 12:43 msdos.o
--rw-r--r--    1 root     root        13660 Jul 26 12:04 ppa.o
--rw-r--r--    1 root     root           54 Jul 26 12:46 to_load
--rw-r--r--    1 root     root        32108 Jul 26 12:04 uhci.o
--rw-r--r--    1 root     root         6572 Jul 26 12:04 wacom.o
-[root@obiwan mnt]# cat floppy/to_load 
-# Update Drivers description file
-3c59x
-# fat is a dep for msdos
-fat
-# updated msdos (handling of 9+4 filenames)
-msdos
-ppa
-# ISA network card needing options
-ne io=0x300 irq=7
-[root@obiwan mnt]# 
---=----=----=----=----=----=----=----=----=--
-
-
-3. The program reads the special file "to_load" and processes the files.
-
-	a- 3c59x   loaded from the marfile on the boot floppy
-	b- fat     loaded from the marfile on the boot floppy
-	c- msdos   loaded from the update modules floppy
-	d- ppa     loaded from the update modules floppy
-        e- ne      loaded from the marfile on the boot floppy
-
-
-
-!!! Beware !!!, the dependencies are not handled automatically in
-the case of load from the update modules floppy, that's why on
-our example we need to load "fat" from the standard modules
-before "msdos" from the update floppy.
diff --git a/mdk-stage1/doc/WHY-DIETLIBC b/mdk-stage1/doc/WHY-DIETLIBC
deleted file mode 100644
index e7c526b49..000000000
--- a/mdk-stage1/doc/WHY-DIETLIBC
+++ /dev/null
@@ -1,50 +0,0 @@
-(the dietlibc is a replacement for the glibc, which aim is to produce
-smaller statically linked binaries)
-
-
-The use for dietlibc in the stage1 was clear because currently used
-install process on x86 is from a 1.44 Mbytes floppy. On this floppy we
-need to fit the kernel, modules (scsi and network access), and the code to
-do the basic things to load the stage2. The only part on which we could
-progress was the code.
-
-As always, figures demonstrate evidences. Here are the size of the
-binaries used for the cdrom, disk, network and full floppy installs, using
-newt as the UI library:
-
-	- with glibc
-
--rwxr-xr-x    1 gc       gc         569448 May 15 15:29 stage1-cdrom
--rwxr-xr-x    1 gc       gc         572264 May 15 15:29 stage1-disk
--rwxr-xr-x    1 gc       gc         624712 May 15 15:30 stage1-network
--rwxr-xr-x    1 gc       gc         720360 May 15 15:29 stage1-full
-
-	- with dietlibc
-
--rwxr-xr-x    1 gc       gc         169332 May 15 14:26 stage1-cdrom
--rwxr-xr-x    1 gc       gc         172180 May 15 14:26 stage1-disk
--rwxr-xr-x    1 gc       gc         198612 May 15 14:26 stage1-network
--rwxr-xr-x    1 gc       gc         251764 May 15 14:26 stage1-full
-
-
-The `stage1-full' binary has code for many things, most notably: data
-decrunching (bzlib), archive extraction (in-house format), module loading
-(insmod from busybox), PCI detection, ide and scsi handling,
-cdrom/disk/loopback mounting, DHCP client negociation (redhat+grub), NFS
-mounting (util-linux), FTP and HTTP transmission (redhat), pcmcia
-initializing (pcmcia-cs), UI interaction (slang/newt); with use of the
-dietlibc, the binary is only 250 kbytes!
-
-
-Due to the modular coding, it is also possible to choose to not use
-slang/newt as the UI, but a stdio-only UI. In that case, the binaries get
-even smaller:
-
--rwxr-xr-x    1 gc       gc         104500 May 15 15:46 stage1-cdrom*
--rwxr-xr-x    1 gc       gc         107348 May 15 15:46 stage1-disk*
--rwxr-xr-x    1 gc       gc         133972 May 15 15:47 stage1-network*
--rwxr-xr-x    1 gc       gc         187348 May 15 15:46 stage1-full*
-
-
-
-gc [Tue May 15 15:58:34 2001]
\ No newline at end of file
diff --git a/mdk-stage1/doc/documented..frontend.h b/mdk-stage1/doc/documented..frontend.h
deleted file mode 100644
index 10417ef3b..000000000
--- a/mdk-stage1/doc/documented..frontend.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Using high-level UI.
- *
- * These functions are frontend-independant: your program won't know each
- * `frontend' (e.g. each way to grab user input) will be used.
- *
- * Then you may link your binary against any `frontend' that implement all
- * these functions (and possibly necessary libraries).
- */
-
-
-#ifndef _FRONTEND_H_
-#define _FRONTEND_H_
-
-/* this must be called before anything else */
-void init_frontend(void);
-
-/* this must be called before exit of program */
-void finish_frontend(void);
-
-
-void info_message(char *msg, ...) __attribute__ ((format (printf, 1, 2))); /* (blocks program) */
-
-void error_message(char *msg, ...) __attribute__ ((format (printf, 1, 2))); /* (blocks program) */
-
-/* (doesn't block program) 
- * (this is not necessarily stackable, e.g. only one wait_message at a time) */
-void wait_message(char *msg, ...) __attribute__ ((format (printf, 1, 2)));
-
-/* call this to finish the wait on wait_message */
-void remove_wait_message(void);
-
-/* monitor progression of something (downloading a file, etc)
- * if size of progression is unknown, use `0' */
-void init_progression(char *msg, int size);
-void update_progression(int current_size);
-void end_progression(void);
-
-enum frontend_return { RETURN_OK, RETURN_BACK, RETURN_ERROR };
-
-/* Yes == RETURN_OK    No == RETURN_ERROR    Back == RETURN_BACK */
-enum frontend_return ask_yes_no(char *msg);
-
-/* [elems] NULL terminated array of char*
- * [choice] address of a (unitialized) char* */
-enum frontend_return ask_from_list(char *msg, char ** elems, char ** choice);
-
-enum frontend_return ask_from_list_comments(char *msg, char ** elems, char ** elems_comments, char ** choice);
-
-/* [questions] NULL terminated array of char*
- * [answers] address of a (unitialized) char**, will contain a non-NULL terminated array of char*
- * [callback_func] function called at most when the answers change; it can examine the array of char* and assign some new char* */
-enum frontend_return ask_from_entries(char *msg, char ** questions, char *** answers, int entry_size, void (*callback_func)(char ** strings));
-
-#endif
diff --git a/mdk-stage1/frontend-common.c b/mdk-stage1/frontend-common.c
deleted file mode 100644
index caddeb7d4..000000000
--- a/mdk-stage1/frontend-common.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdlib.h>
-#include <stdarg.h>
-
-#include "frontend.h"
-
-
-void info_message(char *msg, ...)
-{
-	va_list args;
-	va_start(args, msg);
-	vinfo_message(msg, args);
-	va_end(args);
-}
-
-void wait_message(char *msg, ...)
-{
-	va_list args;
-	va_start(args, msg);
-	vwait_message(msg, args);
-	va_end(args);
-}
-
-void error_message(char *msg, ...)
-{
-	va_list args;
-	va_start(args, msg);
-	verror_message(msg, args);
-	va_end(args);
-}
diff --git a/mdk-stage1/frontend.h b/mdk-stage1/frontend.h
deleted file mode 100644
index 9c2609281..000000000
--- a/mdk-stage1/frontend.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * For doc please read doc/documented..frontend.h
- */
-
-#ifndef _FRONTEND_H_
-#define _FRONTEND_H_
-
-#include <stdarg.h>
-
-
-enum return_type { RETURN_OK, RETURN_BACK, RETURN_ERROR };
-
-void init_frontend(char * welcome_msg);
-void finish_frontend(void);
-
-void error_message(char *msg, ...) __attribute__ ((format (printf, 1, 2))); /* blocking */
-void info_message(char *msg, ...) __attribute__ ((format (printf, 1, 2))); /* blocking */
-void wait_message(char *msg, ...) __attribute__ ((format (printf, 1, 2))); /* non-blocking */
-void remove_wait_message(void);
-
-void init_progression(char *msg, int size);
-void update_progression(int current_size);
-void end_progression(void);
-
-enum return_type ask_yes_no(char *msg);
-enum return_type ask_from_list(char *msg, char ** elems, char ** choice);
-enum return_type ask_from_list_comments(char *msg, char ** elems, char ** elems_comments, char ** choice);
-enum return_type ask_from_entries(char *msg, char ** questions, char *** answers, int entry_size, void (*callback_func)(char ** strings));
-
-void suspend_to_console(void);
-void resume_from_suspend(void);
-
-void verror_message(char *msg, va_list ap);
-void vinfo_message(char *msg, va_list ap);
-void vwait_message(char *msg, va_list ap);
-
-
-#endif
diff --git a/mdk-stage1/init-data/emptyboot.img.bz2 b/mdk-stage1/init-data/emptyboot.img.bz2
deleted file mode 100644
index 6ae939c1b..000000000
--- a/mdk-stage1/init-data/emptyboot.img.bz2
+++ /dev/null
diff --git a/mdk-stage1/init-data/msgboot-blank.img.bz2 b/mdk-stage1/init-data/msgboot-blank.img.bz2
deleted file mode 100644
index a572093d9..000000000
--- a/mdk-stage1/init-data/msgboot-blank.img.bz2
+++ /dev/null
diff --git a/mdk-stage1/init-data/msgboot-graphicallogo-2880.img.bz2 b/mdk-stage1/init-data/msgboot-graphicallogo-2880.img.bz2
deleted file mode 100644
index 9d5d276fb..000000000
--- a/mdk-stage1/init-data/msgboot-graphicallogo-2880.img.bz2
+++ /dev/null
diff --git a/mdk-stage1/init-data/msgboot-graphicallogo.img.bz2 b/mdk-stage1/init-data/msgboot-graphicallogo.img.bz2
deleted file mode 100644
index cbbdb8cc7..000000000
--- a/mdk-stage1/init-data/msgboot-graphicallogo.img.bz2
+++ /dev/null
diff --git a/mdk-stage1/init-data/msgboot.img.bz2 b/mdk-stage1/init-data/msgboot.img.bz2
deleted file mode 100644
index e06018f11..000000000
--- a/mdk-stage1/init-data/msgboot.img.bz2
+++ /dev/null
diff --git a/mdk-stage1/init-libc-headers.h b/mdk-stage1/init-libc-headers.h
deleted file mode 100644
index 01761e869..000000000
--- a/mdk-stage1/init-libc-headers.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <sys/mount.h>
-#include <linux/un.h>
-#include <errno.h>
-#include <signal.h>
-#include <sys/resource.h>
-#include <sys/wait.h>
-#include <linux/unistd.h>
-#include <sys/select.h>
-
-#ifndef SOCK_STREAM
-#define SOCK_STREAM 1
-#endif
-
-static inline _syscall3(int, syslog, int, type, char *, bufp, int, len);
-static inline _syscall3(int, reboot, int, magic, int, magic2, int, flag);
diff --git a/mdk-stage1/init.c b/mdk-stage1/init.c
deleted file mode 100644
index dc4239ac3..000000000
--- a/mdk-stage1/init.c
+++ /dev/null
@@ -1,468 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef INIT_HEADERS
-#include "init-libc-headers.h"
-#else
-#include INIT_HEADERS
-#endif
-
-#include "config-stage1.h"
-
-#if defined(__powerpc__)
-#define TIOCSCTTY     0x540
-#endif
-
-char * env[] = {
-	"PATH=/usr/bin:/bin:/sbin:/usr/sbin:/mnt/sbin:/mnt/usr/sbin:/mnt/bin:/mnt/usr/bin",
-	"LD_LIBRARY_PATH=/lib:/usr/lib:/mnt/lib:/mnt/usr/lib:/usr/X11R6/lib:/mnt/usr/X11R6/lib",
-	"HOME=/",
-	"TERM=linux",
-	"TERMINFO=/etc/terminfo",
-	NULL
-};
-
-
-/* 
- * this needs to handle the following cases:
- *
- *	1) run from a CD root filesystem
- *	2) run from a read only nfs rooted filesystem
- *      3) run from a floppy
- *	4) run from a floppy that's been loaded into a ramdisk 
- *
- */
-
-int testing;
-int klog_pid;
-
-
-void fatal_error(char *msg)
-{
-	printf("FATAL ERROR IN INIT: %s\n\nI can't recover from this, please reboot manually and send bugreport.\n", msg);
-	while (1);
-}
-
-void print_error(char *msg)
-{
-	printf("E: %s\n", msg);
-}
-
-void print_warning(char *msg)
-{
-	printf("W: %s\n", msg);
-}
-
-void print_int_init(int fd, int i)
-{
-	char buf[10];
-	char * chptr = buf + 9;
-	int j = 0;
-	
-	if (i < 0)
-	{
-		write(1, "-", 1);
-		i = -1 * i;
-	}
-	
-	while (i)
-	{
-		*chptr-- = '0' + (i % 10);
-		j++;
-		i = i / 10;
-	}
-	
-	write(fd, chptr + 1, j);
-}
-
-void print_str_init(int fd, char * string)
-{
-	write(fd, string, strlen(string));
-}
-
-
-/* fork to:
- *   (1) watch /proc/kmsg and copy the stuff to /dev/tty4
- *   (2) listens to /dev/log and copy also this stuff (log from programs)
- */
-void doklog()
-{
-	fd_set readset, unixs;
-	int in, out, i;
-	int log;
-	int s;
-	int sock = -1;
-	struct sockaddr_un sockaddr;
-	char buf[1024];
-	int readfd;
-
-	/* open kernel message logger */
-	in = open("/proc/kmsg", O_RDONLY,0);
-	if (in < 0) {
-		print_error("could not open /proc/kmsg");
-		return;
-	}
-
-	if ((log = open("/tmp/syslog", O_WRONLY | O_CREAT, 0644)) < 0) {
-		print_error("error opening /tmp/syslog");
-		sleep(5);
-		return;
-	}
-
-	if ((klog_pid = fork())) {
-		close(in);
-		close(log);
-		return;
-	} else {
-		close(0); 
-		close(1);
-		close(2);
-	}
-	
-	out = open("/dev/tty4", O_WRONLY, 0);
-	if (out < 0) 
-		print_warning("couldn't open tty for syslog -- still using /tmp/syslog\n");
-
-	/* now open the syslog socket */
-// ############# LINUX 2.4 /dev/log IS BUGGED! --> apparently the syslogs can't reach me, and it's full up after a while
-//	  sockaddr.sun_family = AF_UNIX;
-//	  strncpy(sockaddr.sun_path, "/dev/log", UNIX_PATH_MAX);
-//	  sock = socket(AF_UNIX, SOCK_STREAM, 0);
-//	  if (sock < 0) {
-//		  printf("error creating socket: %d\n", errno);
-//		  sleep(5);
-//	  }
-//
-//	  print_str_init(log, "] got socket\n");
-//	  if (bind(sock, (struct sockaddr *) &sockaddr, sizeof(sockaddr.sun_family) + strlen(sockaddr.sun_path)))	{
-//		  print_str_init(log, "] bind error: ");
-//		  print_int_init(log, errno);
-//		  print_str_init(log, "\n");
-//		  sleep(//	  }
-//
-//	  print_str_init(log, "] bound socket\n");
-//	  chmod("/dev/log", 0666);
-//	  if (listen(sock, 5)) {
-//		  print_str_init(log, "] listen error: ");
-//		  print_int_init(log, errno);
-//		  print_str_init(log, "\n");
-//		  sleep(5);
-//	  }
-
-	/* disable on-console syslog output */
-	syslog(8, NULL, 1);
-
-	print_str_init(log, "] kernel/system logger ok\n");
-	FD_ZERO(&unixs);
-	while (1) {
-		memcpy(&readset, &unixs, sizeof(unixs));
-
-		if (sock >= 0)
-			FD_SET(sock, &readset);
-		FD_SET(in, &readset);
-		
-		i = select(20, &readset, NULL, NULL, NULL);
-		if (i <= 0)
-			continue;
-
-		/* has /proc/kmsg things to tell us? */
-		if (FD_ISSET(in, &readset)) {
-			i = read(in, buf, sizeof(buf));
-			if (i > 0) {
-				if (out >= 0)
-					write(out, buf, i);
-				write(log, buf, i);
-			}
-		} 
-
-		/* examine some fd's in the hope to find some syslog outputs from programs */
-		for (readfd = 0; readfd < 20; ++readfd) {
-			if (FD_ISSET(readfd, &readset) && FD_ISSET(readfd, &unixs)) {
-				i = read(readfd, buf, sizeof(buf));
-				if (i > 0) {
-					/* grep out the output of RPM telling that it installed/removed some packages */
-					if (!strstr(buf, "mdk installed") && !strstr(buf, "mdk removed")) {
-						if (out >= 0)
-							write(out, buf, i);
-						write(log, buf, i);
-					}
-				} else if (i == 0) {
-					/* socket closed */
-					close(readfd);
-					FD_CLR(readfd, &unixs);
-				}
-			}
-		}
-
-		/* the socket has moved, new stuff to do */
-		if (sock >= 0 && FD_ISSET(sock, &readset)) {
-			s = sizeof(sockaddr);
-			readfd = accept(sock, (struct sockaddr *) &sockaddr, &s);
-			if (readfd < 0) {
-				char * msg_error = "] error in accept\n";
-				if (out >= 0)
-					write(out, msg_error, strlen(msg_error));
-				write(log, msg_error, strlen(msg_error));
-				close(sock);
-				sock = -1;
-			}
-			else
-				FD_SET(readfd, &unixs);
-		}
-	}
-}
-
-
-#define LOOP_CLR_FD	0x4C01
-
-void del_loop(char *device) 
-{
-	int fd;
-	if ((fd = open(device, O_RDONLY, 0)) < 0) {
-		printf("del_loop open failed\n");
-		return;
-	}
-
-	if (ioctl(fd, LOOP_CLR_FD, 0) < 0) {
-		printf("del_loop ioctl failed");
-		return;
-	}
-
-	close(fd);
-}
-
-struct filesystem
-{
-	char * dev;
-	char * name;
-	char * fs;
-	int mounted;
-};
-
-/* attempt to unmount all filesystems in /proc/mounts */
-void unmount_filesystems(void)
-{
-	int fd, size;
-	char buf[65535];			/* this should be big enough */
-	char *p;
-	struct filesystem fs[500];
-	int numfs = 0;
-	int i, nb;
-	
-	printf("unmounting filesystems...\n"); 
-	
-	fd = open("/proc/mounts", O_RDONLY, 0);
-	if (fd < 1) {
-		print_error("failed to open /proc/mounts");
-		sleep(2);
-		return;
-	}
-
-	size = read(fd, buf, sizeof(buf) - 1);
-	buf[size] = '\0';
-
-	close(fd);
-
-	p = buf;
-	while (*p) {
-		fs[numfs].mounted = 1;
-		fs[numfs].dev = p;
-		while (*p != ' ') p++;
-		*p++ = '\0';
-		fs[numfs].name = p;
-		while (*p != ' ') p++;
-		*p++ = '\0';
-		fs[numfs].fs = p;
-		while (*p != ' ') p++;
-		*p++ = '\0';
-		while (*p != '\n') p++;
-		p++;
-		if (strcmp(fs[numfs].name, "/") != 0) numfs++; /* skip if root, no need to take initrd root in account */
-	}
-
-	/* Pixel's ultra-optimized sorting algorithm:
-	   multiple passes trying to umount everything until nothing moves
-	   anymore (a.k.a holy shotgun method) */
-	do {
-		nb = 0;
-		for (i = 0; i < numfs; i++) {
-			/*printf("trying with %s\n", fs[i].name);*/
-			if (fs[i].mounted && umount(fs[i].name) == 0) { 
-				if (strncmp(fs[i].dev + sizeof("/dev/") - 1, "loop",
-					    sizeof("loop") - 1) == 0)
-					del_loop(fs[i].dev);
-				
-				printf("\t%s\n", fs[i].name);
-				fs[i].mounted = 0;
-				nb++;
-			}
-		}
-	} while (nb);
-	
-	for (i = nb = 0; i < numfs; i++)
-		if (fs[i].mounted) {
-			printf("\t%s umount failed\n", fs[i].name);
-			if (strcmp(fs[i].fs, "ext2") == 0) nb++; /* don't count not-ext2 umount failed */
-		}
-	
-	if (nb) {
-		printf("failed to umount some filesystems\n");
-		while (1);
-	}
-}
-
-int exit_value_rescue = 66;
-
-int main(int argc __attribute__ ((unused)), char **argv __attribute__ ((unused)))
-{
-	pid_t installpid, childpid;
-	int wait_status;
-	int fd;
-	int abnormal_termination = 0;
-	int end_stage2 = 0;
-
-	/* getpid() != 1 should work, by linuxrc tends to get a larger pid */
-	testing = (getpid() > 50);
-
-	if (!testing) {
-		/* turn off screen blanking */
-		printf("\033[9;0]");
-		printf("\033[8]");
-	}
-	else
-		printf("*** TESTING MODE ***\n");
-
-
-	printf("\n\t\t\t\033[1;40mWelcome to \033[1;36mMandrake\033[0;39m Linux\n\n");
-	
-	if (!testing) {
-		if (mount("/proc", "/proc", "proc", 0, NULL))
-			fatal_error("Unable to mount proc filesystem");
-	}
-	
-
-	/* ignore Control-C and keyboard stop signals */
-	signal(SIGINT, SIG_IGN);
-	signal(SIGTSTP, SIG_IGN);
-
-
-	if (!testing) {
-		fd = open("/dev/tty1", O_RDWR, 0);
-		if (fd < 0)
-			/* try with devfs */
-			fd = open("/dev/vc/1", O_RDWR, 0);
-		
-		if (fd < 0)
-			fatal_error("failed to open /dev/tty1 and /dev/vc/1");
-		
-		dup2(fd, 0);
-		dup2(fd, 1);
-		dup2(fd, 2);
-		close(fd);
-	}
-		
-
-	/* I set me up as session leader (probably not necessary?) */
-	setsid();
-	if (ioctl(0, TIOCSCTTY, NULL))
-		print_error("could not set new controlling tty");
-
-	if (!testing) {
-		char my_hostname[] = "localhost.localdomain";
-		sethostname(my_hostname, sizeof(my_hostname));
-		/* the default domainname (as of 2.0.35) is "(none)", which confuses 
-		   glibc */
-		setdomainname("", 0);
-	}
-
-	if (!testing) 
-		doklog();
-
-	/* Go into normal init mode - keep going, and then do a orderly shutdown
-	   when:
-	   
-	   1) install exits
-	   2) we receive a SIGHUP 
-	*/
-
-	printf("If more people were to meet doing raklets, this planet\n");
-	printf("would be a safer place.\n");
-	printf("\n");
-	printf("Running install...\n"); 
-	
-	if (!(installpid = fork())) {
-		/* child */
-		char * child_argv[2];
-		child_argv[0] = "/sbin/stage1";
-		child_argv[1] = NULL;
-
-		execve(child_argv[0], child_argv, env);
-		printf("error in exec of stage1 :-(\n");
-		return 0;
-	}
-
-	while (!end_stage2) {
-		childpid = wait4(-1, &wait_status, 0, NULL);
-		if (childpid == installpid)
-			end_stage2 = 1;
-	}
-
-	if (!WIFEXITED(wait_status) || (WEXITSTATUS(wait_status) != 0 && WEXITSTATUS(wait_status) != exit_value_rescue)) {
-		printf("install exited abnormally :-( ");
-		if (WIFSIGNALED(wait_status))
-			printf("-- received signal %d", WTERMSIG(wait_status));
-		printf("\n");
-		abnormal_termination = 1;
-	} else if (WIFEXITED(wait_status) && WEXITSTATUS(wait_status) == exit_value_rescue) {
-		kill(klog_pid, 9);
-		printf("exiting init -- giving hand to rescue\n");
-		return 0;
-        } else
-		printf("install succeeded\n");
-
-	if (testing)
-		return 0;
-
-	sync(); sync();
-
-	printf("sending termination signals...");
-	kill(-1, 15);
-	sleep(2);
-	printf("done\n");
-
-	printf("sending kill signals...");
-	kill(-1, 9);
-	sleep(2);
-	printf("done\n");
-
-	unmount_filesystems();
-
-	if (!abnormal_termination) {
-		printf("rebooting system\n");
-		sleep(2);
-		reboot(0xfee1dead, 672274793, 0x01234567);
-	} else {
-		printf("you may safely reboot your system\n");
-		while (1);
-	}
-
-	return 0;
-}
diff --git a/mdk-stage1/insmod-busybox/.cvsignore b/mdk-stage1/insmod-busybox/.cvsignore
deleted file mode 100644
index 26a2c08c9..000000000
--- a/mdk-stage1/insmod-busybox/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-insmod
-insmod-DIET
diff --git a/mdk-stage1/insmod-busybox/Config.h b/mdk-stage1/insmod-busybox/Config.h
deleted file mode 100644
index 8388416b7..000000000
--- a/mdk-stage1/insmod-busybox/Config.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/* vi: set sw=4 ts=4: */
-// This file defines the feature set to be compiled into busybox.
-// When you turn things off here, they won't be compiled in at all.
-//
-//// This file is parsed by sed. You MUST use single line comments.
-//   i.e.  //#define BB_BLAH
-//
-//
-// BusyBox Applications
-#define BB_INSMOD
-// End of Applications List
-//
-//
-//
-// ---------------------------------------------------------
-// This is where feature definitions go.  Generally speaking,
-// turning this stuff off makes things a bit smaller (and less 
-// pretty/useful).
-//
-//
-//
-// Turn this on to use Erik's very cool devps, and devmtab kernel drivers,
-// thereby eliminating the need for the /proc filesystem and thereby saving
-// lots and lots memory for more important things.  You can not use this and
-// USE_PROCFS at the same time...  NOTE:  If you enable this feature, you
-// _must_ have patched the kernel to include the devps patch that is included
-// in the busybox/kernel-patches directory.  You will also need to create some
-// device special files in /dev on your embedded system:
-//        mknod /dev/mtab c 10 22
-//        mknod /dev/ps c 10 21
-// I emailed Linus and this patch will not be going into the stock kernel.
-//#define BB_FEATURE_USE_DEVPS_PATCH
-//
-// enable features that use the /proc filesystem (apps that 
-// break without this will tell you on compile)...
-// You can't use this and BB_FEATURE_USE_DEVPS_PATCH 
-// at the same time...
-#define BB_FEATURE_USE_PROCFS
-
-//
-// Enable tab completion in the shell (not yet 
-// working very well -- so don't turn this on)
-//#define BB_FEATURE_SH_TAB_COMPLETION
-//
-//Turn on extra fbset options
-//#define BB_FEATURE_FBSET_FANCY
-//
-//Turn on fbset readmode support
-//#define BB_FEATURE_FBSET_READMODE
-//
-// You must enable one or both of these features
-// Support installing modules from pre 2.1 kernels
-//#define BB_FEATURE_INSMOD_OLD_KERNEL
-// Support installing modules from kernel versions after 2.1.18
-#define BB_FEATURE_INSMOD_NEW_KERNEL
-//
-// Support module version checking
-//#define BB_FEATURE_INSMOD_VERSION_CHECKING
-//
-// Support for Minix filesystem, version 2
-//#define BB_FEATURE_MINIX2
-//
-//
-// Enable busybox --install [-s]
-// to create links (or symlinks) for all the commands that are 
-// compiled into the binary.  (needs /proc filesystem)
-// #define BB_FEATURE_INSTALLER
-//
-// Clean up all memory before exiting -- usually not needed
-// as the OS can clean up...  Don't enable this unless you
-// have a really good reason for cleaning things up manually.
-//#define BB_FEATURE_CLEAN_UP
-//
-// End of Features List
-//
-//
-//
-//
-//
-//
-//---------------------------------------------------
-// Nothing beyond this point should ever be touched by 
-// mere mortals so leave this stuff alone.
-//
-#ifdef BB_FEATURE_MOUNT_MTAB_SUPPORT
-#define BB_MTAB
-#endif
-//
-#if defined BB_FEATURE_SH_COMMAND_EDITING && defined BB_SH
-#define BB_CMDEDIT
-#endif
-//
-#ifdef BB_KILLALL
-#ifndef BB_KILL
-#define BB_KILL
-#endif
-#endif
-//
-#ifdef BB_FEATURE_LINUXRC
-#ifndef BB_INIT
-#define BB_INIT
-#endif
-#define BB_LINUXRC
-#endif
-//
-#ifdef BB_GZIP
-#ifndef BB_GUNZIP
-#define BB_GUNZIP
-#endif
-#endif
-//
-#if defined BB_MOUNT && defined BB_FEATURE_NFSMOUNT
-#define BB_NFSMOUNT
-#endif
-//
-#if defined BB_FEATURE_SH_COMMAND_EDITING
-#ifndef BB_FEATURE_USE_TERMIOS
-#define BB_FEATURE_USE_TERMIOS
-#endif
-#endif
-//
-#if defined BB_FEATURE_AUTOWIDTH
-#ifndef BB_FEATURE_USE_TERMIOS
-#define BB_FEATURE_USE_TERMIOS
-#endif
-#endif
-//
-#if defined BB_INSMOD
-#ifndef BB_FEATURE_INSMOD_OLD_KERNEL
-#define BB_FEATURE_INSMOD_NEW_KERNEL
-#endif
-#endif
diff --git a/mdk-stage1/insmod-busybox/Makefile b/mdk-stage1/insmod-busybox/Makefile
deleted file mode 100644
index c8649ae0d..000000000
--- a/mdk-stage1/insmod-busybox/Makefile
+++ /dev/null
@@ -1,65 +0,0 @@
- #******************************************************************************
- #
- #    insmod from busybox (i386 only)
- #
- # $Id$
- #
- # Copyright (C) 1999,2000 by Lineo, inc.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-all: insmod insmod-DIET libinsmod.a libinsmod-DIET.a
-
-clean:
-	rm -f *.o insmod insmod-DIET libinsmod.a libinsmod-DIET.a
-
-
-FLAGS = -c -Wall -Os -fomit-frame-pointer -D_GNU_SOURCE -DBB_VER='"0.47"' -DBB_BT='"2000.12.06-14:02+0000"'
-
-
-insmod: insmod-frontend.o insmod.o utility-standalone.o
-	gcc -o $@ $^
-	$(STRIPCMD) $@
-
-insmod-DIET: insmod-frontend-DIET.o insmod-DIET.o utility-standalone-DIET.o
-	gcc $(DIETLIBC_LDFLAGS_STAGE1) -o $@ $^ $(DIETLIBC_LIBC)
-	$(STRIPCMD) $@
-
-
-libinsmod.a: insmod.o utility.o
-	ar cru $@ $^
-	ranlib $@
-
-libinsmod-DIET.a: insmod-DIET.o utility-DIET.o
-	ar cru $@ $^
-	ranlib $@
-
-insmod-frontend.o: insmod-frontend.c busybox.h
-	gcc $(FLAGS) $(GLIBC_INCLUDES) insmod-frontend.c
-
-insmod-frontend-DIET.o: insmod-frontend.c busybox.h
-	gcc $(FLAGS) $(DIETLIBC_INCLUDES) -o $@ insmod-frontend.c
-
-utility.o: utility.c busybox.h
-	gcc $(FLAGS) $(GLIBC_INCLUDES) utility.c
-
-utility-DIET.o: utility.c busybox.h
-	gcc $(FLAGS) $(DIETLIBC_INCLUDES) -o $@ utility.c
-
-utility-standalone.o: utility.c busybox.h
-	gcc $(FLAGS) $(GLIBC_INCLUDES) -o $@ -D_STANDALONE_ utility.c
-
-utility-standalone-DIET.o: utility.c busybox.h
-	gcc $(FLAGS) $(DIETLIBC_INCLUDES) -o $@ -D_STANDALONE_ utility.c
-
-insmod.o: insmod.c busybox.h
-	gcc $(FLAGS) $(GLIBC_INCLUDES) insmod.c
-
-insmod-DIET.o: insmod.c busybox.h
-	gcc $(FLAGS) $(DIETLIBC_INCLUDES) -o $@ insmod.c
-
diff --git a/mdk-stage1/insmod-busybox/README b/mdk-stage1/insmod-busybox/README
deleted file mode 100644
index 06695074a..000000000
--- a/mdk-stage1/insmod-busybox/README
+++ /dev/null
@@ -1,8 +0,0 @@
-This insmod code comes from busybox-0.47
-
-ftp://ftp.lineo.com/pub/busybox
-
-It is cool but works only for ix86 architecture.
-
-
-gc
diff --git a/mdk-stage1/insmod-busybox/busybox.h b/mdk-stage1/insmod-busybox/busybox.h
deleted file mode 100644
index a2d620c8b..000000000
--- a/mdk-stage1/insmod-busybox/busybox.h
+++ /dev/null
@@ -1,467 +0,0 @@
-/* vi: set sw=4 ts=4: */
-/*
- * Busybox main internal header file
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Based in part on code from sash, Copyright (c) 1999 by David I. Bell 
- * Permission has been granted to redistribute this code under the GPL.
- *
- */
-#ifndef	_BB_INTERNAL_H_
-#define	_BB_INTERNAL_H_    1
-
-#include "Config.h"
-
-#ifdef DMALLOC
-#include "dmalloc.h"
-#endif
-
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <sys/param.h>
-/* for the _syscall() macros */
-#include <sys/syscall.h>
-#include <linux/unistd.h>
-#include <linux/kernel.h>
-
-/* Some useful definitions */
-#define FALSE   ((int) 1)
-#define TRUE    ((int) 0)
-
-/* for mtab.c */
-#define MTAB_GETMOUNTPT '1'
-#define MTAB_GETDEVICE  '2'
-
-#define BUF_SIZE        8192
-#define EXPAND_ALLOC    1024
-
-
-#define isBlank(ch)     (((ch) == ' ') || ((ch) == '\t'))
-#define isDecimal(ch)   (((ch) >= '0') && ((ch) <= '9'))
-#define isOctal(ch)     (((ch) >= '0') && ((ch) <= '7'))
-#define isWildCard(ch)  (((ch) == '*') || ((ch) == '?') || ((ch) == '['))
-
-/* Macros for min/max.  */
-#ifndef MIN
-#define	MIN(a,b) (((a)<(b))?(a):(b))
-#endif
-
-#ifndef MAX
-#define	MAX(a,b) (((a)>(b))?(a):(b))
-#endif
-
-
-/* I don't like nested includes, but the string and io functions are used
- * too often
- */
-#include <stdio.h>
-#if !defined(NO_STRING_H) || defined(STDC_HEADERS)
-#  include <string.h>
-#  if !defined(STDC_HEADERS) && !defined(NO_MEMORY_H) && !defined(__GNUC__)
-#    include <memory.h>
-#  endif
-#  define memzero(s, n)     memset ((void *)(s), 0, (n))
-#else
-#  include <strings.h>
-#  define strchr            index
-#  define strrchr           rindex
-#  define memcpy(d, s, n)   bcopy((s), (d), (n))
-#  define memcmp(s1, s2, n) bcmp((s1), (s2), (n))
-#  define memzero(s, n)     bzero((s), (n))
-#endif
-
-
-enum Location {
-	_BB_DIR_ROOT = 0,
-	_BB_DIR_BIN,
-	_BB_DIR_SBIN,
-	_BB_DIR_USR_BIN,
-	_BB_DIR_USR_SBIN
-};
-
-struct BB_applet {
-	const	char*	name;
-	int	(*main)(int argc, char** argv);
-	enum	Location	location;
-	const	char*	usage;
-};
-/* From busybox.c */
-extern const struct BB_applet applets[];
-
-extern int ar_main(int argc, char **argv);
-extern int basename_main(int argc, char **argv);
-extern int bogomips_main(int argc, char **argv);
-extern int busybox_main(int argc, char** argv);
-extern int cat_main(int argc, char** argv);
-extern int chmod_chown_chgrp_main(int argc, char** argv);
-extern int chroot_main(int argc, char** argv);
-extern int chvt_main(int argc, char** argv);
-extern int clear_main(int argc, char** argv);
-extern int cp_mv_main(int argc, char** argv);
-extern int cut_main(int argc, char** argv);
-extern int date_main(int argc, char** argv);
-extern int dc_main(int argc, char** argv);
-extern int dd_main(int argc, char** argv);
-extern int dirname_main(int argc, char** argv);
-extern int deallocvt_main(int argc, char** argv);
-extern int df_main(int argc, char** argv);
-extern int dmesg_main(int argc, char** argv);
-extern int dos2unix_main(int argc, char** argv);
-extern int du_main(int argc, char** argv);
-extern int dumpkmap_main(int argc, char** argv);
-extern int dutmp_main(int argc, char** argv);
-extern int echo_main(int argc, char** argv);
-extern int expr_main(int argc, char** argv);
-extern int false_main(int argc, char** argv);
-extern int fbset_main(int argc, char** argv);
-extern int fdisk_main(int argc, char** argv);
-extern int fdflush_main(int argc, char **argv);
-extern int fsck_minix_main(int argc, char **argv);
-extern int find_main(int argc, char** argv);
-extern int free_main(int argc, char** argv);
-extern int freeramdisk_main(int argc, char** argv);
-extern int getopt_main(int argc, char** argv);
-extern int grep_main(int argc, char** argv);
-extern int gunzip_main (int argc, char** argv);
-extern int gzip_main(int argc, char** argv);
-extern int halt_main(int argc, char** argv);
-extern int head_main(int argc, char** argv);
-extern int hostid_main(int argc, char** argv);
-extern int hostname_main(int argc, char** argv);
-extern int id_main(int argc, char** argv);
-extern int init_main(int argc, char** argv);
-extern int insmod_main(int argc, char** argv);
-extern int kill_main(int argc, char** argv);
-extern int length_main(int argc, char** argv);
-extern int ln_main(int argc, char** argv);
-extern int loadacm_main(int argc, char** argv);
-extern int loadfont_main(int argc, char** argv);
-extern int loadkmap_main(int argc, char** argv);
-extern int losetup_main(int argc, char** argv);
-extern int logger_main(int argc, char **argv);
-extern int logname_main(int argc, char **argv);
-extern int ls_main(int argc, char** argv);
-extern int lsmod_main(int argc, char** argv);
-extern int makedevs_main(int argc, char** argv);
-extern int md5sum_main(int argc, char** argv);
-extern int mkdir_main(int argc, char** argv);
-extern int mkfifo_main(int argc, char **argv);
-extern int mkfs_minix_main(int argc, char **argv);
-extern int mknod_main(int argc, char** argv);
-extern int mkswap_main(int argc, char** argv);
-extern int mktemp_main(int argc, char **argv);
-extern int nc_main(int argc, char** argv);
-extern int more_main(int argc, char** argv);
-extern int mount_main(int argc, char** argv);
-extern int mt_main(int argc, char** argv);
-extern int nslookup_main(int argc, char **argv);
-extern int ping_main(int argc, char **argv);
-extern int poweroff_main(int argc, char **argv);
-extern int printf_main(int argc, char** argv);
-extern int ps_main(int argc, char** argv);
-extern int pwd_main(int argc, char** argv);
-extern int rdate_main(int argc, char** argv);
-extern int reboot_main(int argc, char** argv);
-extern int renice_main(int argc, char** argv);
-extern int reset_main(int argc, char** argv);
-extern int rm_main(int argc, char** argv);
-extern int rmdir_main(int argc, char **argv);
-extern int rmmod_main(int argc, char** argv);
-extern int sed_main(int argc, char** argv);
-extern int sfdisk_main(int argc, char** argv);
-extern int setkeycodes_main(int argc, char** argv);
-extern int shell_main(int argc, char** argv);
-extern int sleep_main(int argc, char** argv);
-extern int sort_main(int argc, char** argv);
-extern int swap_on_off_main(int argc, char** argv);
-extern int sync_main(int argc, char** argv);
-extern int syslogd_main(int argc, char **argv);
-extern int tail_main(int argc, char** argv);
-extern int tar_main(int argc, char** argv);
-extern int tee_main(int argc, char** argv);
-extern int test_main(int argc, char** argv);
-extern int telnet_main(int argc, char** argv);
-extern int touch_main(int argc, char** argv);
-extern int tr_main(int argc, char** argv);
-extern int true_main(int argc, char** argv);
-extern int tput_main(int argc, char** argv);
-extern int tryopen_main(int argc, char** argv);
-extern int tty_main(int argc, char** argv);
-extern int umount_main(int argc, char** argv);
-extern int uname_main(int argc, char** argv);
-extern int uniq_main(int argc, char** argv);
-extern int unix2dos_main(int argc, char** argv);
-extern int unrpm_main(int argc, char** argv);
-extern int update_main(int argc, char** argv);
-extern int uptime_main(int argc, char** argv);
-extern int usleep_main(int argc, char** argv);
-extern int uuencode_main(int argc, char** argv);
-extern int uudecode_main(int argc, char** argv);
-extern int wc_main(int argc, char** argv);
-extern int wget_main(int argc, char** argv);
-extern int which_main(int argc, char** argv);
-extern int whoami_main(int argc, char** argv);
-extern int xargs_main(int argc, char** argv);
-extern int yes_main(int argc, char** argv);
-
-extern const char ar_usage[];
-extern const char basename_usage[];
-extern const char cat_usage[];
-extern const char chgrp_usage[];
-extern const char chmod_usage[];
-extern const char chown_usage[];
-extern const char chroot_usage[];
-extern const char chvt_usage[];
-extern const char clear_usage[];
-extern const char cp_usage[];
-extern const char cut_usage[];
-extern const char date_usage[];
-extern const char dc_usage[];
-extern const char dd_usage[];
-extern const char deallocvt_usage[];
-extern const char df_usage[];
-extern const char dirname_usage[];
-extern const char dmesg_usage[];
-extern const char dos2unix_usage[];
-extern const char du_usage[];
-extern const char dumpkmap_usage[];
-extern const char dutmp_usage[];
-extern const char echo_usage[];
-extern const char expr_usage[];
-extern const char false_usage[];
-extern const char fdflush_usage[];
-extern const char find_usage[];
-extern const char free_usage[];
-extern const char freeramdisk_usage[];
-extern const char fsck_minix_usage[];
-extern const char grep_usage[];
-extern const char gunzip_usage[];
-extern const char gzip_usage[];
-extern const char halt_usage[];
-extern const char head_usage[];
-extern const char hostid_usage[];
-extern const char hostname_usage[];
-extern const char id_usage[];
-extern const char insmod_usage[];
-extern const char kill_usage[];
-extern const char killall_usage[];
-extern const char length_usage[];
-extern const char ln_usage[];
-extern const char loadacm_usage[];
-extern const char loadfont_usage[];
-extern const char loadkmap_usage[];
-extern const char logger_usage[];
-extern const char logname_usage[];
-extern const char ls_usage[];
-extern const char lsmod_usage[];
-extern const char makedevs_usage[];
-extern const char md5sum_usage[];
-extern const char mkdir_usage[];
-extern const char mkfifo_usage[];
-extern const char mkfs_minix_usage[];
-extern const char mknod_usage[];
-extern const char mkswap_usage[];
-extern const char mktemp_usage[];
-extern const char more_usage[];
-extern const char mount_usage[]; 
-extern const char mt_usage[];
-extern const char mv_usage[];
-extern const char nc_usage[];
-extern const char nslookup_usage[];
-extern const char ping_usage[];
-extern const char poweroff_usage[];
-extern const char printf_usage[];
-extern const char ps_usage[];
-extern const char pwd_usage[];
-extern const char rdate_usage[];
-extern const char reboot_usage[];
-extern const char renice_usage[];
-extern const char reset_usage[];
-extern const char rm_usage[];
-extern const char rmdir_usage[];
-extern const char rmmod_usage[];
-extern const char sed_usage[];
-extern const char setkeycodes_usage[];
-extern const char shell_usage[];
-extern const char sleep_usage[];
-extern const char sort_usage[];
-extern const char swapoff_usage[];
-extern const char swapon_usage[];
-extern const char sync_usage[];
-extern const char syslogd_usage[];
-extern const char tail_usage[];
-extern const char tar_usage[];
-extern const char tee_usage[];
-extern const char telnet_usage[];
-extern const char test_usage[];
-extern const char touch_usage[];
-extern const char tr_usage[];
-extern const char true_usage[];
-extern const char tty_usage[];
-extern const char umount_usage[];
-extern const char uname_usage[];
-extern const char uniq_usage[];
-extern const char unix2dos_usage[];
-extern const char unrpm_usage[];
-extern const char update_usage[];
-extern const char uptime_usage[];
-extern const char usleep_usage[];
-extern const char uudecode_usage[];
-extern const char uuencode_usage[];
-extern const char wc_usage[];
-extern const char wget_usage[];
-extern const char which_usage[];
-extern const char whoami_usage[];
-extern const char xargs_usage[];
-extern const char yes_usage[];
-
-extern const char *applet_name;
-
-extern void usage(const char *usage) __attribute__ ((noreturn));
-extern void errorMsg(const char *s, ...) __attribute__ ((format (printf, 1, 2)));
-extern void logperror(char *s);
-extern void fatalError(const char *s, ...) __attribute__ ((noreturn, format (printf, 1, 2)));
-
-const char *modeString(int mode);
-const char *timeString(time_t timeVal);
-int isDirectory(const char *name, const int followLinks, struct stat *statBuf);
-int isDevice(const char *name);
-
-typedef struct ino_dev_hash_bucket_struct {
-  struct ino_dev_hash_bucket_struct *next;
-  ino_t ino;
-  dev_t dev;
-  char name[1];
-} ino_dev_hashtable_bucket_t;
-int is_in_ino_dev_hashtable(const struct stat *statbuf, char **name);
-void add_to_ino_dev_hashtable(const struct stat *statbuf, const char *name);
-void reset_ino_dev_hashtable(void);
-
-int copyFile(const char *srcName, const char *destName,
-		 int setModes, int followLinks, int forceFlag);
-int copySubFile(int srcFd, int dstFd, size_t remaining);
-char *buildName(const char *dirName, const char *fileName);
-int makeString(int argc, const char **argv, char *buf, int bufLen);
-char *getChunk(int size);
-char *chunkstrdup(const char *str);
-void freeChunks(void);
-int fullWrite(int fd, const char *buf, int len);
-int fullRead(int fd, char *buf, int len);
-int recursiveAction(const char *fileName, int recurse, int followLinks, int depthFirst,
-	  int (*fileAction) (const char *fileName, struct stat* statbuf, void* userData),
-	  int (*dirAction) (const char *fileName, struct stat* statbuf, void* userData),
-	  void* userData);
-
-extern int createPath (const char *name, int mode);
-extern int parse_mode( const char* s, mode_t* theMode);
-
-extern int get_kernel_revision(void);
-
-extern int get_console_fd(char* tty_name);
-extern struct mntent *findMountPoint(const char *name, const char *table);
-extern void write_mtab(char* blockDevice, char* directory, 
-	char* filesystemType, long flags, char* string_flags);
-extern void erase_mtab(const char * name);
-extern void mtab_read(void);
-extern char *mtab_first(void **iter);
-extern char *mtab_next(void **iter);
-extern char *mtab_getinfo(const char *match, const char which);
-extern int check_wildcard_match(const char* text, const char* pattern);
-extern long getNum (const char *cp);
-extern pid_t* findPidByName( char* pidName);
-extern int find_real_root_device_name(char* name);
-extern char *get_line_from_file(FILE *file);
-extern void print_file(FILE *file);
-extern int print_file_by_name(char *filename);
-extern char process_escape_sequence(char **ptr);
-extern char *get_last_path_component(char *path);
-// extern void xregcomp(regex_t *preg, const char *regex, int cflags);
-
-#ifndef DMALLOC 
-extern void *xmalloc (size_t size);
-extern void *xrealloc(void *old, size_t size);
-extern void *xcalloc(size_t nmemb, size_t size);
-extern char *xstrdup (const char *s);
-#endif
-extern char *xstrndup (const char *s, int n);
-
-
-/* These parse entries in /etc/passwd and /etc/group.  This is desirable
- * for BusyBox since we want to avoid using the glibc NSS stuff, which
- * increases target size and is often not needed embedded systems.  */
-extern long my_getpwnam(char *name);
-extern long my_getgrnam(char *name);
-extern void my_getpwuid(char *name, long uid);
-extern void my_getgrgid(char *group, long gid);
-extern long my_getpwnamegid(char *name);
-
-extern int device_open(char *device, int mode);
-
-#if defined BB_FEATURE_MOUNT_LOOP
-extern int del_loop(const char *device);
-extern int set_loop(const char *device, const char *file, int offset, int *loopro);
-extern char *find_unused_loop_device (void);
-#endif
-
-
-#if (__GLIBC__ < 2) && (defined BB_SYSLOGD || defined BB_INIT)
-extern int vdprintf(int d, const char *format, va_list ap);
-#endif
-
-#if defined BB_NFSMOUNT
-int nfsmount(const char *spec, const char *node, int *flags,
-	     char **extra_opts, char **mount_opts, int running_bg);
-#endif
-
-#ifndef RB_POWER_OFF
-/* Stop system and switch power off if possible.  */
-#define RB_POWER_OFF   0x4321fedc
-#endif
-
-/* Include our own copy of struct sysinfo to avoid binary compatability
- * problems with Linux 2.4, which changed things.  Grumble, grumble. */
-//struct sysinfo {
-//	  long uptime;			/* Seconds since boot */
-//	  unsigned long loads[3];		/* 1, 5, and 15 minute load averages */
-//	  unsigned long totalram;		/* Total usable main memory size */
-//	  unsigned long freeram;		/* Available memory size */
-//	  unsigned long sharedram;	/* Amount of shared memory */
-//	  unsigned long bufferram;	/* Memory used by buffers */
-//	  unsigned long totalswap;	/* Total swap space size */
-//	  unsigned long freeswap;		/* swap space still available */
-//	  unsigned short procs;		/* Number of current processes */
-//	  unsigned long totalhigh;	/* Total high memory size */
-//	  unsigned long freehigh;		/* Available high memory size */
-//	  unsigned int mem_unit;		/* Memory unit size in bytes */
-//	  char _f[20-2*sizeof(long)-sizeof(int)];	/* Padding: libc5 uses this.. */
-//};
-extern int sysinfo (struct sysinfo* info);
-
-/* Bit map related macros -- libc5 doens't provide these... sigh.  */
-#ifndef setbit
-#define NBBY            CHAR_BIT
-#define setbit(a,i)     ((a)[(i)/NBBY] |= 1<<((i)%NBBY))
-#define clrbit(a,i)     ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
-#define isset(a,i)      ((a)[(i)/NBBY] & (1<<((i)%NBBY)))
-#define isclr(a,i)      (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
-#endif
-
-#endif /* _BB_INTERNAL_H_ */
diff --git a/mdk-stage1/insmod-busybox/insmod-frontend.c b/mdk-stage1/insmod-busybox/insmod-frontend.c
deleted file mode 100644
index 3e5d6b3d7..000000000
--- a/mdk-stage1/insmod-busybox/insmod-frontend.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdio.h>
-
-
-int insmod_main( int argc, char **argv);
-
-int main( int argc, char **argv)
-{
-	printf("Using insmod provided by busybox.\n");
-	return insmod_main(argc, argv);
-}
diff --git a/mdk-stage1/insmod-busybox/insmod.c b/mdk-stage1/insmod-busybox/insmod.c
deleted file mode 100644
index bdf7ba5f7..000000000
--- a/mdk-stage1/insmod-busybox/insmod.c
+++ /dev/null
@@ -1,2951 +0,0 @@
-/* vi: set sw=4 ts=4: */
-/*
- * Mini insmod implementation for busybox
- *
- * Copyright (C) 1999,2000 by Lineo, inc.
- * Written by Erik Andersen <andersen@lineo.com>
- * and Ron Alder <alder@lineo.com>
- *
- * Modified by Bryan Rittmeyer <bryan@ixiacom.com> to support SH4
- * and (theoretically) SH3. Note that there is still no true
- * multiple architecture support. You just get SH3|SH4|i386, despite
- * the mention of ARM and m68k--which may or may not work (but
- * almost certainly do not, due to at least MATCH_MACHINE). I have
- * only tested SH4 in little endian mode.
- *
- * Based almost entirely on the Linux modutils-2.3.11 implementation.
- *   Copyright 1996, 1997 Linux International.
- *   New implementation contributed by Richard Henderson <rth@tamu.edu>
- *   Based on original work by Bjorn Ekwall <bj0rn@blox.se>
- *   Restructured (and partly rewritten) by:
- *   Bj�rn Ekwall <bj0rn@blox.se> February 1999
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include "../insmod.h"
-#include "busybox.h"
-#include <stdlib.h>
-#include <stdio.h>
-#include <stddef.h>
-#include <errno.h>
-#include <unistd.h>
-#include <dirent.h>
-#include <ctype.h>
-#include <assert.h>
-#include <sys/utsname.h>
-
-//----------------------------------------------------------------------------
-//--------modutils module.h, lines 45-242
-//----------------------------------------------------------------------------
-
-/* Definitions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-
-#ifndef MODUTILS_MODULE_H
-#define MODUTILS_MODULE_H 1
-
-#ident "$Id$"
-
-/* This file contains the structures used by the 2.0 and 2.1 kernels.
-   We do not use the kernel headers directly because we do not wish
-   to be dependant on a particular kernel version to compile insmod.  */
-
-
-/*======================================================================*/
-/* The structures used by Linux 2.0.  */
-
-/* The symbol format used by get_kernel_syms(2).  */
-struct old_kernel_sym
-{
-  unsigned long value;
-  char name[60];
-};
-
-struct old_module_ref
-{
-  unsigned long module;		/* kernel addresses */
-  unsigned long next;
-};
-
-struct old_module_symbol
-{
-  unsigned long addr;
-  unsigned long name;
-};
-
-struct old_symbol_table
-{
-  int size;			/* total, including string table!!! */
-  int n_symbols;
-  int n_refs;
-  struct old_module_symbol symbol[0]; /* actual size defined by n_symbols */
-  struct old_module_ref ref[0];	/* actual size defined by n_refs */
-};
-
-struct old_mod_routines
-{
-  unsigned long init;
-  unsigned long cleanup;
-};
-
-struct old_module
-{
-  unsigned long next;
-  unsigned long ref;		/* the list of modules that refer to me */
-  unsigned long symtab;
-  unsigned long name;
-  int size;			/* size of module in pages */
-  unsigned long addr;		/* address of module */
-  int state;
-  unsigned long cleanup;	/* cleanup routine */
-};
-
-/* Sent to init_module(2) or'ed into the code size parameter.  */
-#define OLD_MOD_AUTOCLEAN 0x40000000 /* big enough, but no sign problems... */
-
-int get_kernel_syms(struct old_kernel_sym *);
-int old_sys_init_module(const char *name, char *code, unsigned codesize,
-			struct old_mod_routines *, struct old_symbol_table *);
-
-/*======================================================================*/
-/* For sizeof() which are related to the module platform and not to the
-   environment isnmod is running in, use sizeof_xx instead of sizeof(xx).  */
-
-#define tgt_sizeof_char		sizeof(char)
-#define tgt_sizeof_short	sizeof(short)
-#define tgt_sizeof_int		sizeof(int)
-#define tgt_sizeof_long		sizeof(long)
-#define tgt_sizeof_char_p	sizeof(char *)
-#define tgt_sizeof_void_p	sizeof(void *)
-#define tgt_long		long
-
-#if defined(__sparc__) && !defined(__sparc_v9__) && defined(ARCH_sparc64)
-#undef tgt_sizeof_long
-#undef tgt_sizeof_char_p
-#undef tgt_sizeof_void_p
-#undef tgt_long
-#define tgt_sizeof_long		8
-#define tgt_sizeof_char_p	8
-#define tgt_sizeof_void_p	8
-#define tgt_long		long long
-#endif
-
-/*======================================================================*/
-/* The structures used in Linux 2.1.  */
-
-/* Note: new_module_symbol does not use tgt_long intentionally */
-struct new_module_symbol
-{
-  unsigned long value;
-  unsigned long name;
-};
-
-struct new_module_persist;
-
-struct new_module_ref
-{
-  unsigned tgt_long dep;		/* kernel addresses */
-  unsigned tgt_long ref;
-  unsigned tgt_long next_ref;
-};
-
-struct new_module
-{
-  unsigned tgt_long size_of_struct;	/* == sizeof(module) */
-  unsigned tgt_long next;
-  unsigned tgt_long name;
-  unsigned tgt_long size;
-
-  tgt_long usecount;
-  unsigned tgt_long flags;		/* AUTOCLEAN et al */
-
-  unsigned nsyms;
-  unsigned ndeps;
-
-  unsigned tgt_long syms;
-  unsigned tgt_long deps;
-  unsigned tgt_long refs;
-  unsigned tgt_long init;
-  unsigned tgt_long cleanup;
-  unsigned tgt_long ex_table_start;
-  unsigned tgt_long ex_table_end;
-#ifdef __alpha__
-  unsigned tgt_long gp;
-#endif
-  /* Everything after here is extension.  */
-  unsigned tgt_long persist_start;
-  unsigned tgt_long persist_end;
-  unsigned tgt_long can_unload;
-  unsigned tgt_long runsize;
-};
-
-struct new_module_info
-{
-  unsigned long addr;
-  unsigned long size;
-  unsigned long flags;
-	   long usecount;
-};
-
-/* Bits of module.flags.  */
-#define NEW_MOD_RUNNING		1
-#define NEW_MOD_DELETED		2
-#define NEW_MOD_AUTOCLEAN	4
-#define NEW_MOD_VISITED		8
-#define NEW_MOD_USED_ONCE	16
-
-int new_sys_init_module(const char *name, const struct new_module *);
-int query_module(const char *name, int which, void *buf, size_t bufsize,
-		 size_t *ret);
-
-/* Values for query_module's which.  */
-
-#define QM_MODULES	1
-#define QM_DEPS		2
-#define QM_REFS		3
-#define QM_SYMBOLS	4
-#define QM_INFO		5
-
-/*======================================================================*/
-/* The system calls unchanged between 2.0 and 2.1.  */
-
-unsigned long create_module(const char *, size_t);
-int delete_module(const char *);
-
-
-#endif /* module.h */
-
-//----------------------------------------------------------------------------
-//--------end of modutils module.h
-//----------------------------------------------------------------------------
-
-
-
-//----------------------------------------------------------------------------
-//--------modutils obj.h, lines 253-462
-//----------------------------------------------------------------------------
-
-/* Elf object file loading and relocation routines.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-
-#ifndef MODUTILS_OBJ_H
-#define MODUTILS_OBJ_H 1
-
-#ident "$Id$"
-
-/* The relocatable object is manipulated using elfin types.  */
-
-#include <stdio.h>
-#include <elf.h>
-
-
-/* Machine-specific elf macros for i386 et al.  */
-
-/* the SH changes have only been tested on the SH4 in =little endian= mode */
-/* I'm not sure about big endian, so let's warn: */
-
-#if (defined(__SH4__) || defined(__SH3__)) && defined(__BIG_ENDIAN__)
-#error insmod.c may require changes for use on big endian SH4/SH3
-#endif
-
-/* it may or may not work on the SH1/SH2... So let's error on those
-   also */
-#if (defined(__sh__) && (!(defined(__SH3__) || defined(__SH4__))))
-#error insmod.c may require changes for non-SH3/SH4 use
-#endif
-
-#define ELFCLASSM	ELFCLASS32
-#define ELFDATAM	ELFDATA2LSB
-
-
-
-#if defined(__sh__)
-
-#define MATCH_MACHINE(x) (x == EM_SH)
-#define SHT_RELM	SHT_RELA
-#define Elf32_RelM	Elf32_Rela
-
-#else
-
-/* presumably we can use these for anything but the SH */
-/* this is the previous behavior, but it does result in
-   insmod.c being broken on anything except i386 */
-
-#define MATCH_MACHINE(x)  (x == EM_386)
-#define SHT_RELM	SHT_REL
-#define Elf32_RelM	Elf32_Rel
-
-#endif
-
-#ifndef ElfW
-# if ELFCLASSM == ELFCLASS32
-#  define ElfW(x)  Elf32_ ## x
-#  define ELFW(x)  ELF32_ ## x
-# else
-#  define ElfW(x)  Elf64_ ## x
-#  define ELFW(x)  ELF64_ ## x
-# endif
-#endif
-
-/* For some reason this is missing from libc5.  */
-#ifndef ELF32_ST_INFO
-# define ELF32_ST_INFO(bind, type)       (((bind) << 4) + ((type) & 0xf))
-#endif
-
-#ifndef ELF64_ST_INFO
-# define ELF64_ST_INFO(bind, type)       (((bind) << 4) + ((type) & 0xf))
-#endif
-
-struct obj_string_patch;
-struct obj_symbol_patch;
-
-struct obj_section
-{
-  ElfW(Shdr) header;
-  const char *name;
-  char *contents;
-  struct obj_section *load_next;
-  int idx;
-};
-
-struct obj_symbol
-{
-  struct obj_symbol *next;	/* hash table link */
-  const char *name;
-  unsigned long value;
-  unsigned long size;
-  int secidx;			/* the defining section index/module */
-  int info;
-  int ksymidx;			/* for export to the kernel symtab */
-  int referenced;		/* actually used in the link */
-};
-
-/* Hardcode the hash table size.  We shouldn't be needing so many
-   symbols that we begin to degrade performance, and we get a big win
-   by giving the compiler a constant divisor.  */
-
-#define HASH_BUCKETS  521
-
-struct obj_file
-{
-  ElfW(Ehdr) header;
-  ElfW(Addr) baseaddr;
-  struct obj_section **sections;
-  struct obj_section *load_order;
-  struct obj_section **load_order_search_start;
-  struct obj_string_patch *string_patches;
-  struct obj_symbol_patch *symbol_patches;
-  int (*symbol_cmp)(const char *, const char *);
-  unsigned long (*symbol_hash)(const char *);
-  unsigned long local_symtab_size;
-  struct obj_symbol **local_symtab;
-  struct obj_symbol *symtab[HASH_BUCKETS];
-};
-
-enum obj_reloc
-{
-  obj_reloc_ok,
-  obj_reloc_overflow,
-  obj_reloc_dangerous,
-  obj_reloc_unhandled
-};
-
-struct obj_string_patch
-{
-  struct obj_string_patch *next;
-  int reloc_secidx;
-  ElfW(Addr) reloc_offset;
-  ElfW(Addr) string_offset;
-};
-
-struct obj_symbol_patch
-{
-  struct obj_symbol_patch *next;
-  int reloc_secidx;
-  ElfW(Addr) reloc_offset;
-  struct obj_symbol *sym;
-};
-
-
-/* Generic object manipulation routines.  */
-
-unsigned long obj_elf_hash(const char *);
-
-unsigned long obj_elf_hash_n(const char *, unsigned long len);
-
-struct obj_symbol *obj_add_symbol (struct obj_file *f, const char *name,
-				   unsigned long symidx, int info, int secidx,
-				   ElfW(Addr) value, unsigned long size);
-
-struct obj_symbol *obj_find_symbol (struct obj_file *f,
-					 const char *name);
-
-ElfW(Addr) obj_symbol_final_value(struct obj_file *f,
-				  struct obj_symbol *sym);
-
-void obj_set_symbol_compare(struct obj_file *f,
-			    int (*cmp)(const char *, const char *),
-			    unsigned long (*hash)(const char *));
-
-struct obj_section *obj_find_section (struct obj_file *f,
-					   const char *name);
-
-void obj_insert_section_load_order (struct obj_file *f,
-				    struct obj_section *sec);
-
-struct obj_section *obj_create_alloced_section (struct obj_file *f,
-						const char *name,
-						unsigned long align,
-						unsigned long size);
-
-struct obj_section *obj_create_alloced_section_first (struct obj_file *f,
-						      const char *name,
-						      unsigned long align,
-						      unsigned long size);
-
-void *obj_extend_section (struct obj_section *sec, unsigned long more);
-
-int obj_string_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
-		     const char *string);
-
-int obj_symbol_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
-		     struct obj_symbol *sym);
-
-int obj_check_undefineds(struct obj_file *f);
-
-void obj_allocate_commons(struct obj_file *f);
-
-unsigned long obj_load_size (struct obj_file *f);
-
-int obj_relocate (struct obj_file *f, ElfW(Addr) base);
-
-struct obj_file *obj_load(FILE *f);
-
-int obj_create_image (struct obj_file *f, char *image);
-
-/* Architecture specific manipulation routines.  */
-
-struct obj_file *arch_new_file (void);
-
-struct obj_section *arch_new_section (void);
-
-struct obj_symbol *arch_new_symbol (void);
-
-enum obj_reloc arch_apply_relocation (struct obj_file *f,
-				      struct obj_section *targsec,
-				      struct obj_section *symsec,
-				      struct obj_symbol *sym,
-				      ElfW(RelM) *rel, ElfW(Addr) value);
-
-int arch_create_got (struct obj_file *f);
-
-struct new_module;
-int arch_init_module (struct obj_file *f, struct new_module *);
-
-#endif /* obj.h */
-//----------------------------------------------------------------------------
-//--------end of modutils obj.h
-//----------------------------------------------------------------------------
-
-
-
-
-
-#define _PATH_MODULES	"/lib/modules"
-#define STRVERSIONLEN	32
-
-#if !defined(BB_FEATURE_INSMOD_NEW_KERNEL) && !defined(BB_FEATURE_INSMOD_OLD_KERNEL)
-#error "Must have ether BB_FEATURE_INSMOD_NEW_KERNEL or BB_FEATURE_INSMOD_OLD_KERNEL defined"
-#endif
-
-/*======================================================================*/
-
-int flag_force_load = 1;
-int flag_autoclean = 0;
-int flag_export = 1;
-
-
-/*======================================================================*/
-
-/* previously, these were named i386_* but since we could be
-   compiling for the sh, I've renamed them to the more general
-   arch_* These structures are the same between the x86 and SH, 
-   and we can't support anything else right now anyway. In the
-   future maybe they should be #if defined'd */
-
-struct arch_got_entry {
-	int offset;
-	unsigned offset_done:1;
-	unsigned reloc_done:1;
-};
-
-struct arch_file {
-	struct obj_file root;
-	struct obj_section *got;
-};
-
-struct arch_symbol {
-	struct obj_symbol root;
-	struct arch_got_entry gotent;
-};
-
-
-struct external_module {
-	const char *name;
-	ElfW(Addr) addr;
-	int used;
-	size_t nsyms;
-	struct new_module_symbol *syms;
-};
-
-struct new_module_symbol *ksyms;
-size_t nksyms;
-
-struct external_module *ext_modules;
-int n_ext_modules;
-int n_ext_modules_used;
-
-
-
-/* Some firendly syscalls to cheer everyone's day...  */
-#define __NR_new_sys_init_module  __NR_init_module
-_syscall2(int, new_sys_init_module, const char *, name,
-		  const struct new_module *, info)
-#define __NR_old_sys_init_module  __NR_init_module
-_syscall5(int, old_sys_init_module, const char *, name, char *, code,
-		  unsigned, codesize, struct old_mod_routines *, routines,
-		  struct old_symbol_table *, symtab)
-#ifndef BB_RMMOD
-_syscall1(int, delete_module, const char *, name)
-#else
-extern int delete_module(const char *);
-#endif
-
-/* This is kind of troublesome. See, we don't actually support
-   the m68k or the arm the same way we support i386 and (now)
-   sh. In doing my SH patch, I just assumed that whatever works
-   for i386 also works for m68k and arm since currently insmod.c
-   does nothing special for them. If this isn't true, the below
-   line is rather misleading IMHO, and someone should either
-   change it or add more proper architecture-dependent support
-   for these boys.
-
-   -- Bryan Rittmeyer <bryan@ixiacom.com>                    */
-
-#if defined(__i386__) || defined(__m68k__) || defined(__arm__)
-/* Jump through hoops to fixup error return codes */
-#define __NR__create_module  __NR_create_module
-static inline _syscall2(long, _create_module, const char *, name, size_t,
-						size)
-unsigned long create_module(const char *name, size_t size)
-{
-	long ret = _create_module(name, size);
-
-	if (ret == -1 && errno > 125) {
-		ret = -errno;
-		errno = 0;
-	}
-	return ret;
-}
-#else
-_syscall2(unsigned long, create_module, const char *, name, size_t, size)
-#endif
-static char m_filename[BUFSIZ + 1] = "\0";
-static char m_fullName[BUFSIZ + 1] = "\0";
-
-/*======================================================================*/
-
-
-/*======================================================================*/
-
-struct obj_file *arch_new_file(void)
-{
-	struct arch_file *f;
-	f = xmalloc(sizeof(*f));
-	f->got = NULL;
-	return &f->root;
-}
-
-struct obj_section *arch_new_section(void)
-{
-	return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *arch_new_symbol(void)
-{
-	struct arch_symbol *sym;
-	sym = xmalloc(sizeof(*sym));
-	memset(&sym->gotent, 0, sizeof(sym->gotent));
-	return &sym->root;
-}
-
-enum obj_reloc
-arch_apply_relocation(struct obj_file *f,
-					  struct obj_section *targsec,
-					  struct obj_section *symsec,
-					  struct obj_symbol *sym,
-#if defined(__sh__)
-		                          Elf32_Rela * rel, Elf32_Addr v)
-#else
-					  Elf32_Rel * rel, Elf32_Addr v)
-#endif
-{
-	struct arch_file *ifile = (struct arch_file *) f;
-	struct arch_symbol *isym = (struct arch_symbol *) sym;
-
-	Elf32_Addr *loc = (Elf32_Addr *) (targsec->contents + rel->r_offset);
-	Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-	Elf32_Addr got = ifile->got ? ifile->got->header.sh_addr : 0;
-
-	enum obj_reloc ret = obj_reloc_ok;
-
-	switch (ELF32_R_TYPE(rel->r_info)) {
-
-/* even though these constants seem to be the same for
-   the i386 and the sh, we "#if define" them for clarity
-   and in case that ever changes */
-#if defined(__sh__)
-	case R_SH_NONE:
-#else
-	case R_386_NONE:
-#endif
-		break;
-
-#if defined(__sh__)
-	case R_SH_DIR32:
-#else
-	case R_386_32:
-#endif
-		*loc += v;
-		break;
-
-#if defined(__sh__)
-        case R_SH_REL32:
-#else
-	case R_386_PLT32:
-	case R_386_PC32:
-#endif
-		*loc += v - dot;
-		break;
-
-#if defined(__sh__)
-        case R_SH_PLT32:
-                *loc = v - dot;
-                break;
-#endif
-
-
-#if defined(__sh__)
-        case R_SH_GLOB_DAT:
-        case R_SH_JMP_SLOT:
-               	*loc = v;
-                break;
-#else
-	case R_386_GLOB_DAT:
-	case R_386_JMP_SLOT:
-		*loc = v;
-		break;
-#endif
-
-#if defined(__sh__)
-        case R_SH_RELATIVE:
-	        *loc += f->baseaddr + rel->r_addend;
-                break;
-#else
-        case R_386_RELATIVE:
-		*loc += f->baseaddr;
-		break;
-#endif
-
-#if defined(__sh__)
-        case R_SH_GOTPC:
-		assert(got != 0);
-		*loc += got - dot + rel->r_addend;;
-		break;
-#else
-	case R_386_GOTPC:
-		assert(got != 0);
-		*loc += got - dot;
-		break;
-#endif
-
-#if defined(__sh__)
-	case R_SH_GOT32:
- 		assert(isym != NULL);
- 		if (!isym->gotent.reloc_done) {
- 			isym->gotent.reloc_done = 1;
- 			*(Elf32_Addr *) (ifile->got->contents + isym->gotent.offset) =
- 				v;
- 		}
-		*loc += isym->gotent.offset + rel->r_addend;
- 		break;
-#else
-	case R_386_GOT32:
-		assert(isym != NULL);
-		if (!isym->gotent.reloc_done) {
-			isym->gotent.reloc_done = 1;
-			*(Elf32_Addr *) (ifile->got->contents + isym->gotent.offset) =
-				v;
-		}
-		*loc += isym->gotent.offset;
-		break;
-#endif
-
-#if defined(__sh__)
-	case R_SH_GOTOFF:
-#else
-	case R_386_GOTOFF:
-#endif
-		assert(got != 0);
-		*loc += v - got;
-		break;
-
-	default:
-		ret = obj_reloc_unhandled;
-		break;
-	}
-
-	return ret;
-}
-
-int arch_create_got(struct obj_file *f)
-{
-	struct arch_file *ifile = (struct arch_file *) f;
-	int i, n, offset = 0, gotneeded = 0;
-
-	n = ifile->root.header.e_shnum;
-	for (i = 0; i < n; ++i) {
-		struct obj_section *relsec, *symsec, *strsec;
-#if defined(__sh__)
-		Elf32_Rela *rel, *relend;
-#else
-		Elf32_Rel *rel, *relend;
-#endif
-		Elf32_Sym *symtab;
-		const char *strtab;
-
-		relsec = ifile->root.sections[i];
-		if (relsec->header.sh_type != SHT_REL)
-			continue;
-
-		symsec = ifile->root.sections[relsec->header.sh_link];
-		strsec = ifile->root.sections[symsec->header.sh_link];
-
-
-#if defined(__sh__)
-		rel = (Elf32_Rela *) relsec->contents;
-		relend = rel + (relsec->header.sh_size / sizeof(Elf32_Rela));
-#else
-		rel = (Elf32_Rel *) relsec->contents;
-		relend = rel + (relsec->header.sh_size / sizeof(Elf32_Rel));
-#endif
-		symtab = (Elf32_Sym *) symsec->contents;
-		strtab = (const char *) strsec->contents;
-
-		for (; rel < relend; ++rel) {
-			Elf32_Sym *extsym;
-			struct arch_symbol *intsym;
-			const char *name;
-
-			switch (ELF32_R_TYPE(rel->r_info)) {
-#if defined(__sh__)
-			case R_SH_GOTPC:
-			case R_SH_GOTOFF:
-#else
-			case R_386_GOTPC:
-			case R_386_GOTOFF:
-#endif
-				gotneeded = 1;
-			default:
-				continue;
-
-#if defined(__sh__)
-			case R_SH_GOT32:
-#else
-			case R_386_GOT32:
-#endif
-				break;
-			}
-
-			extsym = &symtab[ELF32_R_SYM(rel->r_info)];
-			if (extsym->st_name)
-				name = strtab + extsym->st_name;
-			else
-				name = f->sections[extsym->st_shndx]->name;
-			intsym =
-				(struct arch_symbol *) obj_find_symbol(&ifile->root, name);
-
-			if (!intsym->gotent.offset_done) {
-				intsym->gotent.offset_done = 1;
-				intsym->gotent.offset = offset;
-				offset += 4;
-			}
-		}
-	}
-
-	if (offset > 0 || gotneeded)
-		ifile->got =
-			obj_create_alloced_section(&ifile->root, ".got", 4, offset);
-
-	return 1;
-}
-
-int arch_init_module(struct obj_file *f, struct new_module *mod)
-{
-	return 1;
-}
-
-
-/*======================================================================*/
-
-/* Standard ELF hash function.  */
-inline unsigned long obj_elf_hash_n(const char *name, unsigned long n)
-{
-	unsigned long h = 0;
-	unsigned long g;
-	unsigned char ch;
-
-	while (n > 0) {
-		ch = *name++;
-		h = (h << 4) + ch;
-		if ((g = (h & 0xf0000000)) != 0) {
-			h ^= g >> 24;
-			h &= ~g;
-		}
-		n--;
-	}
-	return h;
-}
-
-unsigned long obj_elf_hash(const char *name)
-{
-	return obj_elf_hash_n(name, strlen(name));
-}
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-/* Get the kernel version in the canonical integer form.  */
-
-static int get_kernel_version(char str[STRVERSIONLEN])
-{
-	struct utsname uts_info;
-	char *p, *q;
-	int a, b, c;
-
-	if (uname(&uts_info) < 0)
-		return -1;
-	strncpy(str, uts_info.release, STRVERSIONLEN);
-	p = uts_info.release;
-
-	a = strtoul(p, &p, 10);
-	if (*p != '.')
-		return -1;
-	b = strtoul(p + 1, &p, 10);
-	if (*p != '.')
-		return -1;
-	c = strtoul(p + 1, &q, 10);
-	if (p + 1 == q)
-		return -1;
-
-	return a << 16 | b << 8 | c;
-}
-
-/* String comparison for non-co-versioned kernel and module.  */
-
-static int ncv_strcmp(const char *a, const char *b)
-{
-	size_t alen = strlen(a), blen = strlen(b);
-
-	if (blen == alen + 10 && b[alen] == '_' && b[alen + 1] == 'R')
-		return strncmp(a, b, alen);
-	else if (alen == blen + 10 && a[blen] == '_' && a[blen + 1] == 'R')
-		return strncmp(a, b, blen);
-	else
-		return strcmp(a, b);
-}
-
-/* String hashing for non-co-versioned kernel and module.  Here
-   we are simply forced to drop the crc from the hash.  */
-
-static unsigned long ncv_symbol_hash(const char *str)
-{
-	size_t len = strlen(str);
-	if (len > 10 && str[len - 10] == '_' && str[len - 9] == 'R')
-		len -= 10;
-	return obj_elf_hash_n(str, len);
-}
-
-void
-obj_set_symbol_compare(struct obj_file *f,
-					   int (*cmp) (const char *, const char *),
-					   unsigned long (*hash) (const char *))
-{
-	if (cmp)
-		f->symbol_cmp = cmp;
-	if (hash) {
-		struct obj_symbol *tmptab[HASH_BUCKETS], *sym, *next;
-		int i;
-
-		f->symbol_hash = hash;
-
-		memcpy(tmptab, f->symtab, sizeof(tmptab));
-		memset(f->symtab, 0, sizeof(f->symtab));
-
-		for (i = 0; i < HASH_BUCKETS; ++i)
-			for (sym = tmptab[i]; sym; sym = next) {
-				unsigned long h = hash(sym->name) % HASH_BUCKETS;
-				next = sym->next;
-				sym->next = f->symtab[h];
-				f->symtab[h] = sym;
-			}
-	}
-}
-
-#endif							/* BB_FEATURE_INSMOD_VERSION_CHECKING */
-
-
-struct obj_symbol *obj_add_symbol(struct obj_file *f, const char *name,
-								  unsigned long symidx, int info,
-								  int secidx, ElfW(Addr) value,
-								  unsigned long size)
-{
-	struct obj_symbol *sym;
-	unsigned long hash = f->symbol_hash(name) % HASH_BUCKETS;
-	int n_type = ELFW(ST_TYPE) (info);
-	int n_binding = ELFW(ST_BIND) (info);
-
-	for (sym = f->symtab[hash]; sym; sym = sym->next)
-		if (f->symbol_cmp(sym->name, name) == 0) {
-			int o_secidx = sym->secidx;
-			int o_info = sym->info;
-			int o_type = ELFW(ST_TYPE) (o_info);
-			int o_binding = ELFW(ST_BIND) (o_info);
-
-			/* A redefinition!  Is it legal?  */
-
-			if (secidx == SHN_UNDEF)
-				return sym;
-			else if (o_secidx == SHN_UNDEF)
-				goto found;
-			else if (n_binding == STB_GLOBAL && o_binding == STB_LOCAL) {
-				/* Cope with local and global symbols of the same name
-				   in the same object file, as might have been created
-				   by ld -r.  The only reason locals are now seen at this
-				   level at all is so that we can do semi-sensible things
-				   with parameters.  */
-
-				struct obj_symbol *nsym, **p;
-
-				nsym = arch_new_symbol();
-				nsym->next = sym->next;
-				nsym->ksymidx = -1;
-
-				/* Excise the old (local) symbol from the hash chain.  */
-				for (p = &f->symtab[hash]; *p != sym; p = &(*p)->next)
-					continue;
-				*p = sym = nsym;
-				goto found;
-			} else if (n_binding == STB_LOCAL) {
-				/* Another symbol of the same name has already been defined.
-				   Just add this to the local table.  */
-				sym = arch_new_symbol();
-				sym->next = NULL;
-				sym->ksymidx = -1;
-				f->local_symtab[symidx] = sym;
-				goto found;
-			} else if (n_binding == STB_WEAK)
-				return sym;
-			else if (o_binding == STB_WEAK)
-				goto found;
-			/* Don't unify COMMON symbols with object types the programmer
-			   doesn't expect.  */
-			else if (secidx == SHN_COMMON
-					 && (o_type == STT_NOTYPE || o_type == STT_OBJECT))
-				return sym;
-			else if (o_secidx == SHN_COMMON
-					 && (n_type == STT_NOTYPE || n_type == STT_OBJECT))
-				goto found;
-			else {
-				/* Don't report an error if the symbol is coming from
-				   the kernel or some external module.  */
-				if (secidx <= SHN_HIRESERVE)
-					errorMsg("%s multiply defined", name);
-				return sym;
-			}
-		}
-
-	/* Completely new symbol.  */
-	sym = arch_new_symbol();
-	sym->next = f->symtab[hash];
-	f->symtab[hash] = sym;
-	sym->ksymidx = -1;
-
-	if (ELFW(ST_BIND) (info) == STB_LOCAL)
-		f->local_symtab[symidx] = sym;
-
-  found:
-	sym->name = name;
-	sym->value = value;
-	sym->size = size;
-	sym->secidx = secidx;
-	sym->info = info;
-
-	return sym;
-}
-
-struct obj_symbol *obj_find_symbol(struct obj_file *f, const char *name)
-{
-	struct obj_symbol *sym;
-	unsigned long hash = f->symbol_hash(name) % HASH_BUCKETS;
-
-	for (sym = f->symtab[hash]; sym; sym = sym->next)
-		if (f->symbol_cmp(sym->name, name) == 0)
-			return sym;
-
-	return NULL;
-}
-
-ElfW(Addr)
-	obj_symbol_final_value(struct obj_file * f, struct obj_symbol * sym)
-{
-	if (sym) {
-		if (sym->secidx >= SHN_LORESERVE)
-			return sym->value;
-
-		return sym->value + f->sections[sym->secidx]->header.sh_addr;
-	} else {
-		/* As a special case, a NULL sym has value zero.  */
-		return 0;
-	}
-}
-
-struct obj_section *obj_find_section(struct obj_file *f, const char *name)
-{
-	int i, n = f->header.e_shnum;
-
-	for (i = 0; i < n; ++i)
-		if (strcmp(f->sections[i]->name, name) == 0)
-			return f->sections[i];
-
-	return NULL;
-}
-
-static int obj_load_order_prio(struct obj_section *a)
-{
-	unsigned long af, ac;
-
-	af = a->header.sh_flags;
-
-	ac = 0;
-	if (a->name[0] != '.' || strlen(a->name) != 10 ||
-		strcmp(a->name + 5, ".init"))
-		ac |= 32;
-	if (af & SHF_ALLOC)
-		ac |= 16;
-	if (!(af & SHF_WRITE))
-		ac |= 8;
-	if (af & SHF_EXECINSTR)
-		ac |= 4;
-	if (a->header.sh_type != SHT_NOBITS)
-		ac |= 2;
-
-	return ac;
-}
-
-void
-obj_insert_section_load_order(struct obj_file *f, struct obj_section *sec)
-{
-	struct obj_section **p;
-	int prio = obj_load_order_prio(sec);
-	for (p = f->load_order_search_start; *p; p = &(*p)->load_next)
-		if (obj_load_order_prio(*p) < prio)
-			break;
-	sec->load_next = *p;
-	*p = sec;
-}
-
-struct obj_section *obj_create_alloced_section(struct obj_file *f,
-											   const char *name,
-											   unsigned long align,
-											   unsigned long size)
-{
-	int newidx = f->header.e_shnum++;
-	struct obj_section *sec;
-
-	f->sections = xrealloc(f->sections, (newidx + 1) * sizeof(sec));
-	f->sections[newidx] = sec = arch_new_section();
-
-	memset(sec, 0, sizeof(*sec));
-	sec->header.sh_type = SHT_PROGBITS;
-	sec->header.sh_flags = SHF_WRITE | SHF_ALLOC;
-	sec->header.sh_size = size;
-	sec->header.sh_addralign = align;
-	sec->name = name;
-	sec->idx = newidx;
-	if (size)
-		sec->contents = xmalloc(size);
-
-	obj_insert_section_load_order(f, sec);
-
-	return sec;
-}
-
-struct obj_section *obj_create_alloced_section_first(struct obj_file *f,
-													 const char *name,
-													 unsigned long align,
-													 unsigned long size)
-{
-	int newidx = f->header.e_shnum++;
-	struct obj_section *sec;
-
-	f->sections = xrealloc(f->sections, (newidx + 1) * sizeof(sec));
-	f->sections[newidx] = sec = arch_new_section();
-
-	memset(sec, 0, sizeof(*sec));
-	sec->header.sh_type = SHT_PROGBITS;
-	sec->header.sh_flags = SHF_WRITE | SHF_ALLOC;
-	sec->header.sh_size = size;
-	sec->header.sh_addralign = align;
-	sec->name = name;
-	sec->idx = newidx;
-	if (size)
-		sec->contents = xmalloc(size);
-
-	sec->load_next = f->load_order;
-	f->load_order = sec;
-	if (f->load_order_search_start == &f->load_order)
-		f->load_order_search_start = &sec->load_next;
-
-	return sec;
-}
-
-void *obj_extend_section(struct obj_section *sec, unsigned long more)
-{
-	unsigned long oldsize = sec->header.sh_size;
-	sec->contents = xrealloc(sec->contents, sec->header.sh_size += more);
-	return sec->contents + oldsize;
-}
-
-
-
-/* Conditionally add the symbols from the given symbol set to the
-   new module.  */
-
-static int
-add_symbols_from(
-				 struct obj_file *f,
-				 int idx, struct new_module_symbol *syms, size_t nsyms)
-{
-	struct new_module_symbol *s;
-	size_t i;
-	int used = 0;
-
-	for (i = 0, s = syms; i < nsyms; ++i, ++s) {
-
-		/* Only add symbols that are already marked external.  If we
-		   override locals we may cause problems for argument initialization.
-		   We will also create a false dependency on the module.  */
-		struct obj_symbol *sym;
-
-		sym = obj_find_symbol(f, (char *) s->name);
-		if (sym && !ELFW(ST_BIND) (sym->info) == STB_LOCAL) {
-			sym = obj_add_symbol(f, (char *) s->name, -1,
-								 ELFW(ST_INFO) (STB_GLOBAL, STT_NOTYPE),
-								 idx, s->value, 0);
-			/* Did our symbol just get installed?  If so, mark the
-			   module as "used".  */
-			if (sym->secidx == idx)
-				used = 1;
-		}
-	}
-
-	return used;
-}
-
-static void add_kernel_symbols(struct obj_file *f)
-{
-	struct external_module *m;
-	int i, nused = 0;
-
-	/* Add module symbols first.  */
-
-	for (i = 0, m = ext_modules; i < n_ext_modules; ++i, ++m)
-		if (m->nsyms
-			&& add_symbols_from(f, SHN_HIRESERVE + 2 + i, m->syms,
-								m->nsyms)) m->used = 1, ++nused;
-
-	n_ext_modules_used = nused;
-
-	/* And finally the symbols from the kernel proper.  */
-
-	if (nksyms)
-		add_symbols_from(f, SHN_HIRESERVE + 1, ksyms, nksyms);
-}
-
-static char *get_modinfo_value(struct obj_file *f, const char *key)
-{
-	struct obj_section *sec;
-	char *p, *v, *n, *ep;
-	size_t klen = strlen(key);
-
-	sec = obj_find_section(f, ".modinfo");
-	if (sec == NULL)
-		return NULL;
-	p = sec->contents;
-	ep = p + sec->header.sh_size;
-	while (p < ep) {
-		v = strchr(p, '=');
-		n = strchr(p, '\0');
-		if (v) {
-			if (p + klen == v && strncmp(p, key, klen) == 0)
-				return v + 1;
-		} else {
-			if (p + klen == n && strcmp(p, key) == 0)
-				return n;
-		}
-		p = n + 1;
-	}
-
-	return NULL;
-}
-
-
-/*======================================================================*/
-/* Functions relating to module loading in pre 2.1 kernels.  */
-
-static int
-old_process_module_arguments(struct obj_file *f, int argc, char **argv)
-{
-	while (argc > 0) {
-		char *p, *q;
-		struct obj_symbol *sym;
-		int *loc;
-
-		p = *argv;
-		if ((q = strchr(p, '=')) == NULL) {
-			argc--;
-			continue;
-                }
-		*q++ = '\0';
-
-		sym = obj_find_symbol(f, p);
-
-		/* Also check that the parameter was not resolved from the kernel.  */
-		if (sym == NULL || sym->secidx > SHN_HIRESERVE) {
-			errorMsg("symbol for parameter %s not found", p);
-			return 0;
-		}
-
-		loc = (int *) (f->sections[sym->secidx]->contents + sym->value);
-
-		/* Do C quoting if we begin with a ".  */
-		if (*q == '"') {
-			char *r, *str;
-
-			str = alloca(strlen(q));
-			for (r = str, q++; *q != '"'; ++q, ++r) {
-				if (*q == '\0') {
-					errorMsg("improperly terminated string argument for %s", p);
-					return 0;
-				} else if (*q == '\\')
-					switch (*++q) {
-					case 'a':
-						*r = '\a';
-						break;
-					case 'b':
-						*r = '\b';
-						break;
-					case 'e':
-						*r = '\033';
-						break;
-					case 'f':
-						*r = '\f';
-						break;
-					case 'n':
-						*r = '\n';
-						break;
-					case 'r':
-						*r = '\r';
-						break;
-					case 't':
-						*r = '\t';
-						break;
-
-					case '0':
-					case '1':
-					case '2':
-					case '3':
-					case '4':
-					case '5':
-					case '6':
-					case '7':
-						{
-							int c = *q - '0';
-							if (q[1] >= '0' && q[1] <= '7') {
-								c = (c * 8) + *++q - '0';
-								if (q[1] >= '0' && q[1] <= '7')
-									c = (c * 8) + *++q - '0';
-							}
-							*r = c;
-						}
-						break;
-
-					default:
-						*r = *q;
-						break;
-				} else
-					*r = *q;
-			}
-			*r = '\0';
-			obj_string_patch(f, sym->secidx, sym->value, str);
-		} else if (*q >= '0' && *q <= '9') {
-			do
-				*loc++ = strtoul(q, &q, 0);
-			while (*q++ == ',');
-		} else {
-			char *contents = f->sections[sym->secidx]->contents;
-			char *loc = contents + sym->value;
-			char *r;			/* To search for commas */
-
-			/* Break the string with comas */
-			while ((r = strchr(q, ',')) != (char *) NULL) {
-				*r++ = '\0';
-				obj_string_patch(f, sym->secidx, loc - contents, q);
-				loc += sizeof(char *);
-				q = r;
-			}
-
-			/* last part */
-			obj_string_patch(f, sym->secidx, loc - contents, q);
-		}
-
-		argc--, argv++;
-	}
-
-	return 1;
-}
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-static int old_is_module_checksummed(struct obj_file *f)
-{
-	return obj_find_symbol(f, "Using_Versions") != NULL;
-}
-/* Get the module's kernel version in the canonical integer form.  */
-
-static int
-old_get_module_version(struct obj_file *f, char str[STRVERSIONLEN])
-{
-	struct obj_symbol *sym;
-	char *p, *q;
-	int a, b, c;
-
-	sym = obj_find_symbol(f, "kernel_version");
-	if (sym == NULL)
-		return -1;
-
-	p = f->sections[sym->secidx]->contents + sym->value;
-	strncpy(str, p, STRVERSIONLEN);
-
-	a = strtoul(p, &p, 10);
-	if (*p != '.')
-		return -1;
-	b = strtoul(p + 1, &p, 10);
-	if (*p != '.')
-		return -1;
-	c = strtoul(p + 1, &q, 10);
-	if (p + 1 == q)
-		return -1;
-
-	return a << 16 | b << 8 | c;
-}
-
-#endif   /* BB_FEATURE_INSMOD_VERSION_CHECKING */
-
-#ifdef BB_FEATURE_INSMOD_OLD_KERNEL
-
-/* Fetch all the symbols and divvy them up as appropriate for the modules.  */
-
-static int old_get_kernel_symbols(const char *m_name)
-{
-	struct old_kernel_sym *ks, *k;
-	struct new_module_symbol *s;
-	struct external_module *mod;
-	int nks, nms, nmod, i;
-
-	nks = get_kernel_syms(NULL);
-	if (nks < 0) {
-		errorMsg("get_kernel_syms: %s: %s", m_name, strerror(errno));
-		return 0;
-	}
-
-	ks = k = xmalloc(nks * sizeof(*ks));
-
-	if (get_kernel_syms(ks) != nks) {
-		logperror("inconsistency with get_kernel_syms -- is someone else "
-			   "playing with modules?");
-		free(ks);
-		return 0;
-	}
-
-	/* Collect the module information.  */
-
-	mod = NULL;
-	nmod = -1;
-
-	while (k->name[0] == '#' && k->name[1]) {
-		struct old_kernel_sym *k2;
-		struct new_module_symbol *s;
-
-		/* Find out how many symbols this module has.  */
-		for (k2 = k + 1; k2->name[0] != '#'; ++k2)
-			continue;
-		nms = k2 - k - 1;
-
-		mod = xrealloc(mod, (++nmod + 1) * sizeof(*mod));
-		mod[nmod].name = k->name + 1;
-		mod[nmod].addr = k->value;
-		mod[nmod].used = 0;
-		mod[nmod].nsyms = nms;
-		mod[nmod].syms = s = (nms ? xmalloc(nms * sizeof(*s)) : NULL);
-
-		for (i = 0, ++k; i < nms; ++i, ++s, ++k) {
-			s->name = (unsigned long) k->name;
-			s->value = k->value;
-		}
-
-		k = k2;
-	}
-
-	ext_modules = mod;
-	n_ext_modules = nmod + 1;
-
-	/* Now collect the symbols for the kernel proper.  */
-
-	if (k->name[0] == '#')
-		++k;
-
-	nksyms = nms = nks - (k - ks);
-	ksyms = s = (nms ? xmalloc(nms * sizeof(*s)) : NULL);
-
-	for (i = 0; i < nms; ++i, ++s, ++k) {
-		s->name = (unsigned long) k->name;
-		s->value = k->value;
-	}
-
-	return 1;
-}
-
-/* Return the kernel symbol checksum version, or zero if not used.  */
-
-static int old_is_kernel_checksummed(void)
-{
-	/* Using_Versions is the first symbol.  */
-	if (nksyms > 0
-		&& strcmp((char *) ksyms[0].name,
-				  "Using_Versions") == 0) return ksyms[0].value;
-	else
-		return 0;
-}
-
-
-static int old_create_mod_use_count(struct obj_file *f)
-{
-	struct obj_section *sec;
-
-	sec = obj_create_alloced_section_first(f, ".moduse", sizeof(long),
-										   sizeof(long));
-
-	obj_add_symbol(f, "mod_use_count_", -1,
-				   ELFW(ST_INFO) (STB_LOCAL, STT_OBJECT), sec->idx, 0,
-				   sizeof(long));
-
-	return 1;
-}
-
-static int
-old_init_module(const char *m_name, struct obj_file *f,
-				unsigned long m_size)
-{
-	char *image;
-	struct old_mod_routines routines;
-	struct old_symbol_table *symtab;
-	int ret;
-
-	/* Create the symbol table */
-	{
-		int nsyms = 0, strsize = 0, total;
-
-		/* Size things first... */
-		if (flag_export) {
-			int i;
-			for (i = 0; i < HASH_BUCKETS; ++i) {
-				struct obj_symbol *sym;
-				for (sym = f->symtab[i]; sym; sym = sym->next)
-					if (ELFW(ST_BIND) (sym->info) != STB_LOCAL
-						&& sym->secidx <= SHN_HIRESERVE) 
-					{
-						sym->ksymidx = nsyms++;
-						strsize += strlen(sym->name) + 1;
-					}
-			}
-		}
-
-		total = (sizeof(struct old_symbol_table)
-				 + nsyms * sizeof(struct old_module_symbol)
-				 + n_ext_modules_used * sizeof(struct old_module_ref)
-				 + strsize);
-		symtab = xmalloc(total);
-		symtab->size = total;
-		symtab->n_symbols = nsyms;
-		symtab->n_refs = n_ext_modules_used;
-
-		if (flag_export && nsyms) {
-			struct old_module_symbol *ksym;
-			char *str;
-			int i;
-
-			ksym = symtab->symbol;
-			str = ((char *) ksym + nsyms * sizeof(struct old_module_symbol)
-				   + n_ext_modules_used * sizeof(struct old_module_ref));
-
-			for (i = 0; i < HASH_BUCKETS; ++i) {
-				struct obj_symbol *sym;
-				for (sym = f->symtab[i]; sym; sym = sym->next)
-					if (sym->ksymidx >= 0) {
-						ksym->addr = obj_symbol_final_value(f, sym);
-						ksym->name =
-							(unsigned long) str - (unsigned long) symtab;
-
-						str = stpcpy(str, sym->name) + 1;
-						ksym++;
-					}
-			}
-		}
-
-		if (n_ext_modules_used) {
-			struct old_module_ref *ref;
-			int i;
-
-			ref = (struct old_module_ref *)
-				((char *) symtab->symbol + nsyms * sizeof(struct old_module_symbol));
-
-			for (i = 0; i < n_ext_modules; ++i)
-				if (ext_modules[i].used)
-					ref++->module = ext_modules[i].addr;
-		}
-	}
-
-	/* Fill in routines.  */
-
-	routines.init =
-		obj_symbol_final_value(f, obj_find_symbol(f, "init_module"));
-	routines.cleanup =
-		obj_symbol_final_value(f, obj_find_symbol(f, "cleanup_module"));
-
-	/* Whew!  All of the initialization is complete.  Collect the final
-	   module image and give it to the kernel.  */
-
-	image = xmalloc(m_size);
-	obj_create_image(f, image);
-
-	/* image holds the complete relocated module, accounting correctly for
-	   mod_use_count.  However the old module kernel support assume that
-	   it is receiving something which does not contain mod_use_count.  */
-	ret = old_sys_init_module(m_name, image + sizeof(long),
-							  m_size | (flag_autoclean ? OLD_MOD_AUTOCLEAN
-										: 0), &routines, symtab);
-	if (ret)
-		errorMsg("init_module: %s: %s", m_name, strerror(errno));
-
-	free(image);
-	free(symtab);
-
-	return ret == 0;
-}
-
-#else
-
-#define old_create_mod_use_count(x) TRUE
-#define old_init_module(x, y, z) TRUE
-
-#endif							/* BB_FEATURE_INSMOD_OLD_KERNEL */
-
-
-
-/*======================================================================*/
-/* Functions relating to module loading after 2.1.18.  */
-
-static int
-new_process_module_arguments(struct obj_file *f, int argc, char **argv)
-{
-	while (argc > 0) {
-		char *p, *q, *key;
-		struct obj_symbol *sym;
-		char *contents, *loc;
-		int min, max, n;
-
-		p = *argv;
-		if ((q = strchr(p, '=')) == NULL) {
-			argc--;
-			continue;
-                }
-
-		key = alloca(q - p + 6);
-		memcpy(key, "parm_", 5);
-		memcpy(key + 5, p, q - p);
-		key[q - p + 5] = 0;
-
-		p = get_modinfo_value(f, key);
-		key += 5;
-		if (p == NULL) {
-			errorMsg("invalid parameter %s", key);
-			return 0;
-		}
-
-		sym = obj_find_symbol(f, key);
-
-		/* Also check that the parameter was not resolved from the kernel.  */
-		if (sym == NULL || sym->secidx > SHN_HIRESERVE) {
-			errorMsg("symbol for parameter %s not found", key);
-			return 0;
-		}
-
-		if (isdigit(*p)) {
-			min = strtoul(p, &p, 10);
-			if (*p == '-')
-				max = strtoul(p + 1, &p, 10);
-			else
-				max = min;
-		} else
-			min = max = 1;
-
-		contents = f->sections[sym->secidx]->contents;
-		loc = contents + sym->value;
-		n = (*++q != '\0');
-
-		while (1) {
-			if ((*p == 's') || (*p == 'c')) {
-				char *str;
-
-				/* Do C quoting if we begin with a ", else slurp the lot.  */
-				if (*q == '"') {
-					char *r;
-
-					str = alloca(strlen(q));
-					for (r = str, q++; *q != '"'; ++q, ++r) {
-						if (*q == '\0') {
-							errorMsg("improperly terminated string argument for %s",
-									key);
-							return 0;
-						} else if (*q == '\\')
-							switch (*++q) {
-							case 'a':
-								*r = '\a';
-								break;
-							case 'b':
-								*r = '\b';
-								break;
-							case 'e':
-								*r = '\033';
-								break;
-							case 'f':
-								*r = '\f';
-								break;
-							case 'n':
-								*r = '\n';
-								break;
-							case 'r':
-								*r = '\r';
-								break;
-							case 't':
-								*r = '\t';
-								break;
-
-							case '0':
-							case '1':
-							case '2':
-							case '3':
-							case '4':
-							case '5':
-							case '6':
-							case '7':
-								{
-									int c = *q - '0';
-									if (q[1] >= '0' && q[1] <= '7') {
-										c = (c * 8) + *++q - '0';
-										if (q[1] >= '0' && q[1] <= '7')
-											c = (c * 8) + *++q - '0';
-									}
-									*r = c;
-								}
-								break;
-
-							default:
-								*r = *q;
-								break;
-						} else
-							*r = *q;
-					}
-					*r = '\0';
-					++q;
-				} else {
-					char *r;
-
-					/* In this case, the string is not quoted. We will break
-					   it using the coma (like for ints). If the user wants to
-					   include comas in a string, he just has to quote it */
-
-					/* Search the next coma */
-					r = strchr(q, ',');
-
-					/* Found ? */
-					if (r != (char *) NULL) {
-						/* Recopy the current field */
-						str = alloca(r - q + 1);
-						memcpy(str, q, r - q);
-
-						/* I don't know if it is usefull, as the previous case
-						   doesn't null terminate the string ??? */
-						str[r - q] = '\0';
-
-						/* Keep next fields */
-						q = r;
-					} else {
-						/* last string */
-						str = q;
-						q = "";
-					}
-				}
-
-				if (*p == 's') {
-					/* Normal string */
-					obj_string_patch(f, sym->secidx, loc - contents, str);
-					loc += tgt_sizeof_char_p;
-				} else {
-					/* Array of chars (in fact, matrix !) */
-					unsigned long charssize;	/* size of each member */
-
-					/* Get the size of each member */
-					/* Probably we should do that outside the loop ? */
-					if (!isdigit(*(p + 1))) {
-						errorMsg("parameter type 'c' for %s must be followed by"
-								" the maximum size", key);
-						return 0;
-					}
-					charssize = strtoul(p + 1, (char **) NULL, 10);
-
-					/* Check length */
-					if (strlen(str) >= charssize) {
-						errorMsg("string too long for %s (max %ld)", key,
-								charssize - 1);
-						return 0;
-					}
-
-					/* Copy to location */
-					strcpy((char *) loc, str);
-					loc += charssize;
-				}
-			} else {
-				long v = strtoul(q, &q, 0);
-				switch (*p) {
-				case 'b':
-					*loc++ = v;
-					break;
-				case 'h':
-					*(short *) loc = v;
-					loc += tgt_sizeof_short;
-					break;
-				case 'i':
-					*(int *) loc = v;
-					loc += tgt_sizeof_int;
-					break;
-				case 'l':
-					*(long *) loc = v;
-					loc += tgt_sizeof_long;
-					break;
-
-				default:
-					errorMsg("unknown parameter type '%c' for %s", *p, key);
-					return 0;
-				}
-			}
-
-		  retry_end_of_value:
-			switch (*q) {
-			case '\0':
-				goto end_of_arg;
-
-			case ' ':
-			case '\t':
-			case '\n':
-			case '\r':
-				++q;
-				goto retry_end_of_value;
-
-			case ',':
-				if (++n > max) {
-					errorMsg("too many values for %s (max %d)", key, max);
-					return 0;
-				}
-				++q;
-				break;
-
-			default:
-				errorMsg("invalid argument syntax for %s", key);
-				return 0;
-			}
-		}
-
-	  end_of_arg:
-		if (n < min) {
-			errorMsg("too few values for %s (min %d)", key, min);
-			return 0;
-		}
-
-		argc--, argv++;
-	}
-
-	return 1;
-}
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-static int new_is_module_checksummed(struct obj_file *f)
-{
-	const char *p = get_modinfo_value(f, "using_checksums");
-	if (p)
-		return atoi(p);
-	else
-		return 0;
-}
-
-/* Get the module's kernel version in the canonical integer form.  */
-
-static int
-new_get_module_version(struct obj_file *f, char str[STRVERSIONLEN])
-{
-	char *p, *q;
-	int a, b, c;
-
-	p = get_modinfo_value(f, "kernel_version");
-	if (p == NULL)
-		return -1;
-	strncpy(str, p, STRVERSIONLEN);
-
-	a = strtoul(p, &p, 10);
-	if (*p != '.')
-		return -1;
-	b = strtoul(p + 1, &p, 10);
-	if (*p != '.')
-		return -1;
-	c = strtoul(p + 1, &q, 10);
-	if (p + 1 == q)
-		return -1;
-
-	return a << 16 | b << 8 | c;
-}
-
-#endif   /* BB_FEATURE_INSMOD_VERSION_CHECKING */
-
-
-#ifdef BB_FEATURE_INSMOD_NEW_KERNEL
-
-/* Fetch the loaded modules, and all currently exported symbols.  */
-
-static int new_get_kernel_symbols(void)
-{
-	char *module_names, *mn;
-	struct external_module *modules, *m;
-	struct new_module_symbol *syms, *s;
-	size_t ret, bufsize, nmod, nsyms, i, j;
-
-	/* Collect the loaded modules.  */
-
-	module_names = xmalloc(bufsize = 256);
-  retry_modules_load:
-	if (query_module(NULL, QM_MODULES, module_names, bufsize, &ret)) {
-		if (errno == ENOSPC) {
-			module_names = xrealloc(module_names, bufsize = ret);
-			goto retry_modules_load;
-		}
-		errorMsg("QM_MODULES: %s", strerror(errno));
-		return 0;
-	}
-
-	n_ext_modules = nmod = ret;
-	ext_modules = modules = xmalloc(nmod * sizeof(*modules));
-	memset(modules, 0, nmod * sizeof(*modules));
-
-	/* Collect the modules' symbols.  */
-
-	for (i = 0, mn = module_names, m = modules;
-		 i < nmod; ++i, ++m, mn += strlen(mn) + 1) {
-		struct new_module_info info;
-
-		if (query_module(mn, QM_INFO, &info, sizeof(info), &ret)) {
-			if (errno == ENOENT) {
-				/* The module was removed out from underneath us.  */
-				continue;
-			}
-			errorMsg("query_module: QM_INFO: %s: %s", mn, strerror(errno));
-			return 0;
-		}
-
-		syms = xmalloc(bufsize = 1024);
-	  retry_mod_sym_load:
-		if (query_module(mn, QM_SYMBOLS, syms, bufsize, &ret)) {
-			switch (errno) {
-			case ENOSPC:
-				syms = xrealloc(syms, bufsize = ret);
-				goto retry_mod_sym_load;
-			case ENOENT:
-				/* The module was removed out from underneath us.  */
-				continue;
-			default:
-				errorMsg("query_module: QM_SYMBOLS: %s: %s", mn, strerror(errno));
-				return 0;
-			}
-		}
-		nsyms = ret;
-
-		m->name = mn;
-		m->addr = info.addr;
-		m->nsyms = nsyms;
-		m->syms = syms;
-
-		for (j = 0, s = syms; j < nsyms; ++j, ++s) {
-			s->name += (unsigned long) syms;
-		}
-	}
-
-	/* Collect the kernel's symbols.  */
-
-	syms = xmalloc(bufsize = 16 * 1024);
-  retry_kern_sym_load:
-	if (query_module(NULL, QM_SYMBOLS, syms, bufsize, &ret)) {
-		if (errno == ENOSPC) {
-			syms = xrealloc(syms, bufsize = ret);
-			goto retry_kern_sym_load;
-		}
-		errorMsg("kernel: QM_SYMBOLS: %s", strerror(errno));
-		return 0;
-	}
-	nksyms = nsyms = ret;
-	ksyms = syms;
-
-	for (j = 0, s = syms; j < nsyms; ++j, ++s) {
-		s->name += (unsigned long) syms;
-	}
-	return 1;
-}
-
-
-/* Return the kernel symbol checksum version, or zero if not used.  */
-
-static int new_is_kernel_checksummed(void)
-{
-	struct new_module_symbol *s;
-	size_t i;
-
-	/* Using_Versions is not the first symbol, but it should be in there.  */
-
-	for (i = 0, s = ksyms; i < nksyms; ++i, ++s)
-		if (strcmp((char *) s->name, "Using_Versions") == 0)
-			return s->value;
-
-	return 0;
-}
-
-
-static int new_create_this_module(struct obj_file *f, const char *m_name)
-{
-	struct obj_section *sec;
-
-	sec = obj_create_alloced_section_first(f, ".this", tgt_sizeof_long,
-										   sizeof(struct new_module));
-	memset(sec->contents, 0, sizeof(struct new_module));
-
-	obj_add_symbol(f, "__this_module", -1,
-				   ELFW(ST_INFO) (STB_LOCAL, STT_OBJECT), sec->idx, 0,
-				   sizeof(struct new_module));
-
-	obj_string_patch(f, sec->idx, offsetof(struct new_module, name),
-					 m_name);
-
-	return 1;
-}
-
-
-static int new_create_module_ksymtab(struct obj_file *f)
-{
-	struct obj_section *sec;
-	int i;
-
-	/* We must always add the module references.  */
-
-	if (n_ext_modules_used) {
-		struct new_module_ref *dep;
-		struct obj_symbol *tm;
-
-		sec = obj_create_alloced_section(f, ".kmodtab", tgt_sizeof_void_p,
-										 (sizeof(struct new_module_ref)
-										  * n_ext_modules_used));
-		if (!sec)
-			return 0;
-
-		tm = obj_find_symbol(f, "__this_module");
-		dep = (struct new_module_ref *) sec->contents;
-		for (i = 0; i < n_ext_modules; ++i)
-			if (ext_modules[i].used) {
-				dep->dep = ext_modules[i].addr;
-				obj_symbol_patch(f, sec->idx,
-								 (char *) &dep->ref - sec->contents, tm);
-				dep->next_ref = 0;
-				++dep;
-			}
-	}
-
-	if (flag_export && !obj_find_section(f, "__ksymtab")) {
-		size_t nsyms;
-		int *loaded;
-
-		sec =
-			obj_create_alloced_section(f, "__ksymtab", tgt_sizeof_void_p,
-									   0);
-
-		/* We don't want to export symbols residing in sections that
-		   aren't loaded.  There are a number of these created so that
-		   we make sure certain module options don't appear twice.  */
-
-		loaded = alloca(sizeof(int) * (i = f->header.e_shnum));
-		while (--i >= 0)
-			loaded[i] = (f->sections[i]->header.sh_flags & SHF_ALLOC) != 0;
-
-		for (nsyms = i = 0; i < HASH_BUCKETS; ++i) {
-			struct obj_symbol *sym;
-			for (sym = f->symtab[i]; sym; sym = sym->next)
-				if (ELFW(ST_BIND) (sym->info) != STB_LOCAL
-					&& sym->secidx <= SHN_HIRESERVE
-					&& (sym->secidx >= SHN_LORESERVE
-						|| loaded[sym->secidx])) {
-					ElfW(Addr) ofs = nsyms * 2 * tgt_sizeof_void_p;
-
-					obj_symbol_patch(f, sec->idx, ofs, sym);
-					obj_string_patch(f, sec->idx, ofs + tgt_sizeof_void_p,
-									 sym->name);
-
-					nsyms++;
-				}
-		}
-
-		obj_extend_section(sec, nsyms * 2 * tgt_sizeof_char_p);
-	}
-
-	return 1;
-}
-
-
-static int
-new_init_module(const char *m_name, struct obj_file *f,
-				unsigned long m_size)
-{
-	struct new_module *module;
-	struct obj_section *sec;
-	void *image;
-	int ret;
-	tgt_long m_addr;
-
-	sec = obj_find_section(f, ".this");
-	module = (struct new_module *) sec->contents;
-	m_addr = sec->header.sh_addr;
-
-	module->size_of_struct = sizeof(*module);
-	module->size = m_size;
-	module->flags = flag_autoclean ? NEW_MOD_AUTOCLEAN : 0;
-
-	sec = obj_find_section(f, "__ksymtab");
-	if (sec && sec->header.sh_size) {
-		module->syms = sec->header.sh_addr;
-		module->nsyms = sec->header.sh_size / (2 * tgt_sizeof_char_p);
-	}
-
-	if (n_ext_modules_used) {
-		sec = obj_find_section(f, ".kmodtab");
-		module->deps = sec->header.sh_addr;
-		module->ndeps = n_ext_modules_used;
-	}
-
-	module->init =
-		obj_symbol_final_value(f, obj_find_symbol(f, "init_module"));
-	module->cleanup =
-		obj_symbol_final_value(f, obj_find_symbol(f, "cleanup_module"));
-
-	sec = obj_find_section(f, "__ex_table");
-	if (sec) {
-		module->ex_table_start = sec->header.sh_addr;
-		module->ex_table_end = sec->header.sh_addr + sec->header.sh_size;
-	}
-
-	sec = obj_find_section(f, ".text.init");
-	if (sec) {
-		module->runsize = sec->header.sh_addr - m_addr;
-	}
-	sec = obj_find_section(f, ".data.init");
-	if (sec) {
-		if (!module->runsize ||
-			module->runsize > sec->header.sh_addr - m_addr)
-				module->runsize = sec->header.sh_addr - m_addr;
-	}
-
-	if (!arch_init_module(f, module))
-		return 0;
-
-	/* Whew!  All of the initialization is complete.  Collect the final
-	   module image and give it to the kernel.  */
-
-	image = xmalloc(m_size);
-	obj_create_image(f, image);
-
-	ret = new_sys_init_module(m_name, (struct new_module *) image);
-	if (ret)
-		errorMsg("init_module: %s: %s", m_name, strerror(errno));
-
-	free(image);
-
-	return ret == 0;
-}
-
-#else
-
-#define new_init_module(x, y, z) TRUE
-#define new_create_this_module(x, y) 0
-#define new_create_module_ksymtab(x)
-
-#endif							/* BB_FEATURE_INSMOD_OLD_KERNEL */
-
-
-/*======================================================================*/
-
-int
-obj_string_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
-				 const char *string)
-{
-	struct obj_string_patch *p;
-	struct obj_section *strsec;
-	size_t len = strlen(string) + 1;
-	char *loc;
-
-	p = xmalloc(sizeof(*p));
-	p->next = f->string_patches;
-	p->reloc_secidx = secidx;
-	p->reloc_offset = offset;
-	f->string_patches = p;
-
-	strsec = obj_find_section(f, ".kstrtab");
-	if (strsec == NULL) {
-		strsec = obj_create_alloced_section(f, ".kstrtab", 1, len);
-		p->string_offset = 0;
-		loc = strsec->contents;
-	} else {
-		p->string_offset = strsec->header.sh_size;
-		loc = obj_extend_section(strsec, len);
-	}
-	memcpy(loc, string, len);
-
-	return 1;
-}
-
-int
-obj_symbol_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
-				 struct obj_symbol *sym)
-{
-	struct obj_symbol_patch *p;
-
-	p = xmalloc(sizeof(*p));
-	p->next = f->symbol_patches;
-	p->reloc_secidx = secidx;
-	p->reloc_offset = offset;
-	p->sym = sym;
-	f->symbol_patches = p;
-
-	return 1;
-}
-
-int obj_check_undefineds(struct obj_file *f)
-{
-	unsigned long i;
-	int ret = 1;
-
-	for (i = 0; i < HASH_BUCKETS; ++i) {
-		struct obj_symbol *sym;
-		for (sym = f->symtab[i]; sym; sym = sym->next)
-			if (sym->secidx == SHN_UNDEF) {
-				if (ELFW(ST_BIND) (sym->info) == STB_WEAK) {
-					sym->secidx = SHN_ABS;
-					sym->value = 0;
-				} else {
-					errorMsg("unresolved symbol %s", sym->name);
-					ret = 0;
-				}
-			}
-	}
-
-	return ret;
-}
-
-void obj_allocate_commons(struct obj_file *f)
-{
-	struct common_entry {
-		struct common_entry *next;
-		struct obj_symbol *sym;
-	} *common_head = NULL;
-
-	unsigned long i;
-
-	for (i = 0; i < HASH_BUCKETS; ++i) {
-		struct obj_symbol *sym;
-		for (sym = f->symtab[i]; sym; sym = sym->next)
-			if (sym->secidx == SHN_COMMON) {
-				/* Collect all COMMON symbols and sort them by size so as to
-				   minimize space wasted by alignment requirements.  */
-				{
-					struct common_entry **p, *n;
-					for (p = &common_head; *p; p = &(*p)->next)
-						if (sym->size <= (*p)->sym->size)
-							break;
-
-					n = alloca(sizeof(*n));
-					n->next = *p;
-					n->sym = sym;
-					*p = n;
-				}
-			}
-	}
-
-	for (i = 1; i < f->local_symtab_size; ++i) {
-		struct obj_symbol *sym = f->local_symtab[i];
-		if (sym && sym->secidx == SHN_COMMON) {
-			struct common_entry **p, *n;
-			for (p = &common_head; *p; p = &(*p)->next)
-				if (sym == (*p)->sym)
-					break;
-				else if (sym->size < (*p)->sym->size) {
-					n = alloca(sizeof(*n));
-					n->next = *p;
-					n->sym = sym;
-					*p = n;
-					break;
-				}
-		}
-	}
-
-	if (common_head) {
-		/* Find the bss section.  */
-		for (i = 0; i < f->header.e_shnum; ++i)
-			if (f->sections[i]->header.sh_type == SHT_NOBITS)
-				break;
-
-		/* If for some reason there hadn't been one, create one.  */
-		if (i == f->header.e_shnum) {
-			struct obj_section *sec;
-
-			f->sections = xrealloc(f->sections, (i + 1) * sizeof(sec));
-			f->sections[i] = sec = arch_new_section();
-			f->header.e_shnum = i + 1;
-
-			memset(sec, 0, sizeof(*sec));
-			sec->header.sh_type = SHT_PROGBITS;
-			sec->header.sh_flags = SHF_WRITE | SHF_ALLOC;
-			sec->name = ".bss";
-			sec->idx = i;
-		}
-
-		/* Allocate the COMMONS.  */
-		{
-			ElfW(Addr) bss_size = f->sections[i]->header.sh_size;
-			ElfW(Addr) max_align = f->sections[i]->header.sh_addralign;
-			struct common_entry *c;
-
-			for (c = common_head; c; c = c->next) {
-				ElfW(Addr) align = c->sym->value;
-
-				if (align > max_align)
-					max_align = align;
-				if (bss_size & (align - 1))
-					bss_size = (bss_size | (align - 1)) + 1;
-
-				c->sym->secidx = i;
-				c->sym->value = bss_size;
-
-				bss_size += c->sym->size;
-			}
-
-			f->sections[i]->header.sh_size = bss_size;
-			f->sections[i]->header.sh_addralign = max_align;
-		}
-	}
-
-	/* For the sake of patch relocation and parameter initialization,
-	   allocate zeroed data for NOBITS sections now.  Note that after
-	   this we cannot assume NOBITS are really empty.  */
-	for (i = 0; i < f->header.e_shnum; ++i) {
-		struct obj_section *s = f->sections[i];
-		if (s->header.sh_type == SHT_NOBITS) {
-			s->contents = memset(xmalloc(s->header.sh_size),
-								 0, s->header.sh_size);
-			s->header.sh_type = SHT_PROGBITS;
-		}
-	}
-}
-
-unsigned long obj_load_size(struct obj_file *f)
-{
-	unsigned long dot = 0;
-	struct obj_section *sec;
-
-	/* Finalize the positions of the sections relative to one another.  */
-
-	for (sec = f->load_order; sec; sec = sec->load_next) {
-		ElfW(Addr) align;
-
-		align = sec->header.sh_addralign;
-		if (align && (dot & (align - 1)))
-			dot = (dot | (align - 1)) + 1;
-
-		sec->header.sh_addr = dot;
-		dot += sec->header.sh_size;
-	}
-
-	return dot;
-}
-
-int obj_relocate(struct obj_file *f, ElfW(Addr) base)
-{
-	int i, n = f->header.e_shnum;
-	int ret = 1;
-
-	/* Finalize the addresses of the sections.  */
-
-	f->baseaddr = base;
-	for (i = 0; i < n; ++i)
-		f->sections[i]->header.sh_addr += base;
-
-	/* And iterate over all of the relocations.  */
-
-	for (i = 0; i < n; ++i) {
-		struct obj_section *relsec, *symsec, *targsec, *strsec;
-		ElfW(RelM) * rel, *relend;
-		ElfW(Sym) * symtab;
-		const char *strtab;
-
-		relsec = f->sections[i];
-		if (relsec->header.sh_type != SHT_RELM)
-			continue;
-
-		symsec = f->sections[relsec->header.sh_link];
-		targsec = f->sections[relsec->header.sh_info];
-		strsec = f->sections[symsec->header.sh_link];
-
-		rel = (ElfW(RelM) *) relsec->contents;
-		relend = rel + (relsec->header.sh_size / sizeof(ElfW(RelM)));
-		symtab = (ElfW(Sym) *) symsec->contents;
-		strtab = (const char *) strsec->contents;
-
-		for (; rel < relend; ++rel) {
-			ElfW(Addr) value = 0;
-			struct obj_symbol *intsym = NULL;
-			unsigned long symndx;
-			ElfW(Sym) * extsym = 0;
-			const char *errmsg;
-
-			/* Attempt to find a value to use for this relocation.  */
-
-			symndx = ELFW(R_SYM) (rel->r_info);
-			if (symndx) {
-				/* Note we've already checked for undefined symbols.  */
-
-				extsym = &symtab[symndx];
-				if (ELFW(ST_BIND) (extsym->st_info) == STB_LOCAL) {
-					/* Local symbols we look up in the local table to be sure
-					   we get the one that is really intended.  */
-					intsym = f->local_symtab[symndx];
-				} else {
-					/* Others we look up in the hash table.  */
-					const char *name;
-					if (extsym->st_name)
-						name = strtab + extsym->st_name;
-					else
-						name = f->sections[extsym->st_shndx]->name;
-					intsym = obj_find_symbol(f, name);
-				}
-
-				value = obj_symbol_final_value(f, intsym);
-				intsym->referenced = 1;
-			}
-#if SHT_RELM == SHT_RELA
-#if defined(__alpha__) && defined(AXP_BROKEN_GAS)
-			/* Work around a nasty GAS bug, that is fixed as of 2.7.0.9.  */
-			if (!extsym || !extsym->st_name ||
-				ELFW(ST_BIND) (extsym->st_info) != STB_LOCAL)
-#endif
-				value += rel->r_addend;
-#endif
-
-			/* Do it! */
-			switch (arch_apply_relocation
-					(f, targsec, symsec, intsym, rel, value)) {
-			case obj_reloc_ok:
-				break;
-
-			case obj_reloc_overflow:
-				errmsg = "Relocation overflow";
-				goto bad_reloc;
-			case obj_reloc_dangerous:
-				errmsg = "Dangerous relocation";
-				goto bad_reloc;
-			case obj_reloc_unhandled:
-				errmsg = "Unhandled relocation";
-			  bad_reloc:
-				if (extsym) {
-					errorMsg("%s of type %ld for %s", errmsg,
-							(long) ELFW(R_TYPE) (rel->r_info),
-							strtab + extsym->st_name);
-				} else {
-					errorMsg("%s of type %ld", errmsg,
-							(long) ELFW(R_TYPE) (rel->r_info));
-				}
-				ret = 0;
-				break;
-			}
-		}
-	}
-
-	/* Finally, take care of the patches.  */
-
-	if (f->string_patches) {
-		struct obj_string_patch *p;
-		struct obj_section *strsec;
-		ElfW(Addr) strsec_base;
-		strsec = obj_find_section(f, ".kstrtab");
-		strsec_base = strsec->header.sh_addr;
-
-		for (p = f->string_patches; p; p = p->next) {
-			struct obj_section *targsec = f->sections[p->reloc_secidx];
-			*(ElfW(Addr) *) (targsec->contents + p->reloc_offset)
-				= strsec_base + p->string_offset;
-		}
-	}
-
-	if (f->symbol_patches) {
-		struct obj_symbol_patch *p;
-
-		for (p = f->symbol_patches; p; p = p->next) {
-			struct obj_section *targsec = f->sections[p->reloc_secidx];
-			*(ElfW(Addr) *) (targsec->contents + p->reloc_offset)
-				= obj_symbol_final_value(f, p->sym);
-		}
-	}
-
-	return ret;
-}
-
-int obj_create_image(struct obj_file *f, char *image)
-{
-	struct obj_section *sec;
-	ElfW(Addr) base = f->baseaddr;
-
-	for (sec = f->load_order; sec; sec = sec->load_next) {
-		char *secimg;
-
-		if (sec->header.sh_size == 0)
-			continue;
-
-		secimg = image + (sec->header.sh_addr - base);
-
-		/* Note that we allocated data for NOBITS sections earlier.  */
-		memcpy(secimg, sec->contents, sec->header.sh_size);
-	}
-
-	return 1;
-}
-
-/*======================================================================*/
-
-struct obj_file *obj_load(FILE * fp)
-{
-	struct obj_file *f;
-	ElfW(Shdr) * section_headers;
-	int shnum, i;
-	char *shstrtab;
-
-	/* Read the file header.  */
-
-	f = arch_new_file();
-	memset(f, 0, sizeof(*f));
-	f->symbol_cmp = strcmp;
-	f->symbol_hash = obj_elf_hash;
-	f->load_order_search_start = &f->load_order;
-
-	fseek(fp, 0, SEEK_SET);
-	if (fread(&f->header, sizeof(f->header), 1, fp) != 1) {
-		errorMsg("error reading ELF header: %s", strerror(errno));
-		return NULL;
-	}
-
-	if (f->header.e_ident[EI_MAG0] != ELFMAG0
-		|| f->header.e_ident[EI_MAG1] != ELFMAG1
-		|| f->header.e_ident[EI_MAG2] != ELFMAG2
-		|| f->header.e_ident[EI_MAG3] != ELFMAG3) {
-		errorMsg("not an ELF file");
-		return NULL;
-	}
-	if (f->header.e_ident[EI_CLASS] != ELFCLASSM
-		|| f->header.e_ident[EI_DATA] != ELFDATAM
-		|| f->header.e_ident[EI_VERSION] != EV_CURRENT
-		|| !MATCH_MACHINE(f->header.e_machine)) {
-		errorMsg("ELF file not for this architecture");
-		return NULL;
-	}
-	if (f->header.e_type != ET_REL) {
-		errorMsg("ELF file not a relocatable object");
-		return NULL;
-	}
-
-	/* Read the section headers.  */
-
-	if (f->header.e_shentsize != sizeof(ElfW(Shdr))) {
-		errorMsg("section header size mismatch: %lu != %lu",
-				(unsigned long) f->header.e_shentsize,
-				(unsigned long) sizeof(ElfW(Shdr)));
-		return NULL;
-	}
-
-	shnum = f->header.e_shnum;
-	f->sections = xmalloc(sizeof(struct obj_section *) * shnum);
-	memset(f->sections, 0, sizeof(struct obj_section *) * shnum);
-
-	section_headers = alloca(sizeof(ElfW(Shdr)) * shnum);
-	fseek(fp, f->header.e_shoff, SEEK_SET);
-	if (fread(section_headers, sizeof(ElfW(Shdr)), shnum, fp) != shnum) {
-		errorMsg("error reading ELF section headers: %s", strerror(errno));
-		return NULL;
-	}
-
-	/* Read the section data.  */
-
-	for (i = 0; i < shnum; ++i) {
-		struct obj_section *sec;
-
-		f->sections[i] = sec = arch_new_section();
-		memset(sec, 0, sizeof(*sec));
-
-		sec->header = section_headers[i];
-		sec->idx = i;
-
-		switch (sec->header.sh_type) {
-		case SHT_NULL:
-		case SHT_NOTE:
-		case SHT_NOBITS:
-			/* ignore */
-			break;
-
-		case SHT_PROGBITS:
-		case SHT_SYMTAB:
-		case SHT_STRTAB:
-		case SHT_RELM:
-			if (sec->header.sh_size > 0) {
-				sec->contents = xmalloc(sec->header.sh_size);
-				fseek(fp, sec->header.sh_offset, SEEK_SET);
-				if (fread(sec->contents, sec->header.sh_size, 1, fp) != 1) {
-					errorMsg("error reading ELF section data: %s", strerror(errno));
-					return NULL;
-				}
-			} else {
-				sec->contents = NULL;
-			}
-			break;
-
-#if SHT_RELM == SHT_REL
-		case SHT_RELA:
-			errorMsg("RELA relocations not supported on this architecture");
-			return NULL;
-#else
-		case SHT_REL:
-			errorMsg("REL relocations not supported on this architecture");
-			return NULL;
-#endif
-
-		default:
-			if (sec->header.sh_type >= SHT_LOPROC) {
-				/* Assume processor specific section types are debug
-				   info and can safely be ignored.  If this is ever not
-				   the case (Hello MIPS?), don't put ifdefs here but
-				   create an arch_load_proc_section().  */
-				break;
-			}
-
-			errorMsg("can't handle sections of type %ld",
-					(long) sec->header.sh_type);
-			return NULL;
-		}
-	}
-
-	/* Do what sort of interpretation as needed by each section.  */
-
-	shstrtab = f->sections[f->header.e_shstrndx]->contents;
-
-	for (i = 0; i < shnum; ++i) {
-		struct obj_section *sec = f->sections[i];
-		sec->name = shstrtab + sec->header.sh_name;
-	}
-
-	for (i = 0; i < shnum; ++i) {
-		struct obj_section *sec = f->sections[i];
-
-		if (sec->header.sh_flags & SHF_ALLOC)
-			obj_insert_section_load_order(f, sec);
-
-		switch (sec->header.sh_type) {
-		case SHT_SYMTAB:
-			{
-				unsigned long nsym, j;
-				char *strtab;
-				ElfW(Sym) * sym;
-
-				if (sec->header.sh_entsize != sizeof(ElfW(Sym))) {
-					errorMsg("symbol size mismatch: %lu != %lu",
-							(unsigned long) sec->header.sh_entsize,
-							(unsigned long) sizeof(ElfW(Sym)));
-					return NULL;
-				}
-
-				nsym = sec->header.sh_size / sizeof(ElfW(Sym));
-				strtab = f->sections[sec->header.sh_link]->contents;
-				sym = (ElfW(Sym) *) sec->contents;
-
-				/* Allocate space for a table of local symbols.  */
-				j = f->local_symtab_size = sec->header.sh_info;
-				f->local_symtab = xmalloc(j *=
-										  sizeof(struct obj_symbol *));
-				memset(f->local_symtab, 0, j);
-
-				/* Insert all symbols into the hash table.  */
-				for (j = 1, ++sym; j < nsym; ++j, ++sym) {
-					const char *name;
-					if (sym->st_name)
-						name = strtab + sym->st_name;
-		else
-						name = f->sections[sym->st_shndx]->name;
-
-					obj_add_symbol(f, name, j, sym->st_info, sym->st_shndx,
-								   sym->st_value, sym->st_size);
-		}
-	}
-			break;
-
-		case SHT_RELM:
-			if (sec->header.sh_entsize != sizeof(ElfW(RelM))) {
-				errorMsg("relocation entry size mismatch: %lu != %lu",
-						(unsigned long) sec->header.sh_entsize,
-						(unsigned long) sizeof(ElfW(RelM)));
-				return NULL;
-			}
-			break;
-		}
-	}
-
-	return f;
-}
-
-static void hide_special_symbols(struct obj_file *f)
-{
-	static const char *const specials[] = {
-		"cleanup_module",
-		"init_module",
-		"kernel_version",
-		NULL
-	};
-
-	struct obj_symbol *sym;
-	const char *const *p;
-
-	for (p = specials; *p; ++p)
-		if ((sym = obj_find_symbol(f, *p)) != NULL)
-			sym->info =
-				ELFW(ST_INFO) (STB_LOCAL, ELFW(ST_TYPE) (sym->info));
-}
-
-
-void my_usage(void)
-{
-	printf("Usage.");
-	exit(0);
-}
-
-extern int insmod_main( int argc, char **argv)
-{
-	int k_crcs;
-	int k_new_syscalls;
-	int len;
-	char *tmp;
-	unsigned long m_size;
-	ElfW(Addr) m_addr;
-	FILE *fp;
-	struct obj_file *f;
-	char m_name[BUFSIZ + 1] = "\0";
-	int exit_status = FALSE;
-	int m_has_modinfo;
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-	int k_version;
-	char k_strversion[STRVERSIONLEN];
-	char m_strversion[STRVERSIONLEN];
-	int m_version;
-	int m_crcs;
-#endif
-
-
-	if (argc <= 1)
-		my_usage();
-
-	argv++; argc--;
-
-	/* Grab the module name */
-	if ((tmp = strrchr(*argv, '/')) != NULL) {
-		tmp++;
-	} else {
-		tmp = *argv;
-	}
-	len = strlen(tmp);
-
-	if (len > 2 && tmp[len - 2] == '.' && tmp[len - 1] == 'o')
-		len -= 2;
-	memcpy(m_name, tmp, len);
-	strcpy(m_fullName, m_name);
-	strcat(m_fullName, ".o");
-
-	/* Get a filedesc for the module */
-	if ((fp = fopen(*argv, "r")) == NULL) {
-		errorMsg("Module %s not found", *argv);
-		return -1;
-	} else
-		memcpy(m_filename, *argv, strlen(*argv));
-
-
-	if ((f = obj_load(fp)) == NULL) {
-		logperror("Could not load the module");
-		goto out;
-	}
-
-	if (get_modinfo_value(f, "kernel_version") == NULL)
-		m_has_modinfo = 0;
-	else
-		m_has_modinfo = 1;
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-	/* Version correspondence?  */
-
-	k_version = get_kernel_version(k_strversion);
-	if (m_has_modinfo) {
-		m_version = new_get_module_version(f, m_strversion);
-	} else {
-		m_version = old_get_module_version(f, m_strversion);
-		if (m_version == -1) {
-			errorMsg("couldn't find the kernel version the module was "
-					"compiled for");
-			goto out;
-		}
-	}
-
-	if (strncmp(k_strversion, m_strversion, STRVERSIONLEN) != 0) {
-		if (flag_force_load) {
-			errorMsg("Warning: kernel-module version mismatch\n"
-					"\t%s was compiled for kernel version %s\n"
-					"\twhile this kernel is version %s",
-					m_filename, m_strversion, k_strversion);
-		} else {
-			errorMsg("kernel-module version mismatch\n"
-					"\t%s was compiled for kernel version %s\n"
-					"\twhile this kernel is version %s.",
-					m_filename, m_strversion, k_strversion);
-			goto out;
-		}
-	}
-	k_crcs = 0;
-#endif							/* BB_FEATURE_INSMOD_VERSION_CHECKING */
-
-	k_new_syscalls = !query_module(NULL, 0, NULL, 0, NULL);
-
-	if (k_new_syscalls) {
-#ifdef BB_FEATURE_INSMOD_NEW_KERNEL
-		if (!new_get_kernel_symbols())
-			goto out;
-		k_crcs = new_is_kernel_checksummed();
-#else
-		errorMsg("Not configured to support new kernels");
-		goto out;
-#endif
-	} else {
-#ifdef BB_FEATURE_INSMOD_OLD_KERNEL
-		if (!old_get_kernel_symbols(m_name))
-			goto out;
-		k_crcs = old_is_kernel_checksummed();
-#else
-		errorMsg("Not configured to support old kernels");
-		goto out;
-#endif
-	}
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-	if (m_has_modinfo)
-		m_crcs = new_is_module_checksummed(f);
-	else
-		m_crcs = old_is_module_checksummed(f);
-
-	if (m_crcs != k_crcs)
-		obj_set_symbol_compare(f, ncv_strcmp, ncv_symbol_hash);
-#endif							/* BB_FEATURE_INSMOD_VERSION_CHECKING */
-
-	/* Let the module know about the kernel symbols.  */
-	add_kernel_symbols(f);
-
-	/* Allocate common symbols, symbol tables, and string tables.  */
-
-	if (k_new_syscalls 
-		? !new_create_this_module(f, m_name)
-		: !old_create_mod_use_count(f)) 
-	{
-		goto out;
-	}
-
-	if (!obj_check_undefineds(f)) {
-		goto out;
-	}
-	obj_allocate_commons(f);
-
-	if (m_has_modinfo
-	    ? !new_process_module_arguments(f, argc-1, argv+1)
-	    : !old_process_module_arguments(f, argc-1, argv+1)) 
-	{
-		goto out;
-	}
-
-	arch_create_got(f);
-	hide_special_symbols(f);
-
-	if (k_new_syscalls)
-		new_create_module_ksymtab(f);
-
-	/* Find current size of the module */
-	m_size = obj_load_size(f);
-
-
-	errno = 0;
-	m_addr = create_module(m_name, m_size);
-	switch (errno) {
-	case 0:
-		break;
-	case EEXIST:
-		errorMsg("A module named %s already exists", m_name);
-		/* Considered as a success in stage1 */
-		fclose(fp);
-		return(TRUE);
-	case ENOMEM:
-		errorMsg("Can't allocate kernel memory for module; needed %lu bytes",
-				m_size);
-		goto out;
-	default:
-		errorMsg("create_module: %s: %s", m_name, strerror(errno));
-		goto out;
-	}
-
-	if (!obj_relocate(f, m_addr)) {
-		delete_module(m_name);
-		goto out;
-	}
-
-	if (k_new_syscalls 
-		? !new_init_module(m_name, f, m_size)
-		: !old_init_module(m_name, f, m_size)) 
-	{
-		delete_module(m_name);
-		goto out;
-	}
-
-	exit_status = TRUE;
-
-out:
-	fclose(fp);
-	return(exit_status);
-}
-
-
-int insmod_call(char * full_filename, char * params)
-{
-	int argc = 2;
-	char *argv[50];
-	char * ptr = params;
-	argv[0] = "stage1";
-	argv[1] = full_filename;
-
-	while (ptr != NULL) {
-		argv[argc] = ptr;
-		argc++;
-		ptr = strchr(ptr, ' ');
-		if (ptr) {
-			ptr[0] = '\0';
-			ptr++;
-		}
-	}
-
-	return insmod_main(argc, argv);
-}
diff --git a/mdk-stage1/insmod-busybox/loop.h b/mdk-stage1/insmod-busybox/loop.h
deleted file mode 100644
index cba8c6b2b..000000000
--- a/mdk-stage1/insmod-busybox/loop.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/posix_types.h>
-#undef dev_t
-#define dev_t __kernel_dev_t
-#include <linux/loop.h>
-#undef dev_t
diff --git a/mdk-stage1/insmod-busybox/messages.c b/mdk-stage1/insmod-busybox/messages.c
deleted file mode 100644
index 81fd9c75c..000000000
--- a/mdk-stage1/insmod-busybox/messages.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/* vi: set sw=4 ts=4: */
-/*
- * Copyright (C) 2000 by BitterSweet Enterprises, LLC.
- * Written by Karl M. Hegbloom <karlheg@debian.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-/*
- *  Let's put all of these messages in one place, and link this in as
- *  a separate object module, so that there are not going to be
- *  multiple non-unique but very similar strings in the binary.
- *  Perhaps this will make it simpler to internationalize also, and
- *  may make the binary slightly smaller.
- */
-
-// To use this header file, include something like this:
-//
-//#define BB_DECLARE_EXTERN
-//#define bb_need_memory_exhausted
-//#include "messages.c"
-//
-//Then just use the string memory_exhausted when it is needed.
-//
-
-#include "busybox.h"
-#ifndef _BB_MESSAGES_C
-#define _BB_MESSAGES_C
-
-#ifdef BB_DECLARE_EXTERN
-#  define BB_DEF_MESSAGE(symbol, string_const) extern const char *symbol;
-#else
-#  define BB_DEF_MESSAGE(symbol, string_const) const char *symbol = string_const;
-#endif
-
-
-#if defined bb_need_full_version || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(full_version,
-	 "BusyBox v" BB_VER " (" BB_BT ") multi-call binary -- GPL2")
-#endif
-#if defined bb_need_name_too_long || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(name_too_long, "file name too long\n")
-#endif
-#if defined bb_need_omitting_directory || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(omitting_directory, "%s: omitting directory\n")
-#endif
-#if defined bb_need_not_a_directory || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(not_a_directory, "%s: not a directory\n")
-#endif
-#if defined bb_need_memory_exhausted || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(memory_exhausted, "memory exhausted\n")
-#endif
-#if defined bb_need_invalid_date || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(invalid_date, "invalid date `%s'\n")
-#endif
-#if defined bb_need_invalid_option || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(invalid_option, "invalid option -- %c\n")
-#endif
-#if defined bb_need_io_error || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(io_error, "%s: input/output error -- %s\n")
-#endif
-#if defined bb_need_help || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(dash_dash_help, "--help")
-#endif
-#if defined bb_need_write_error || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(write_error, "Write Error\n")
-#endif
-#if defined bb_need_too_few_args || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(too_few_args, "too few arguments\n")
-#endif
-#if defined bb_need_name_longer_then_foo || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(name_longer_then_foo, "Names longer then %d chars not supported.\n")
-#endif
-
-
-#endif /* _BB_MESSAGES_C */
-
diff --git a/mdk-stage1/insmod-busybox/utility.c b/mdk-stage1/insmod-busybox/utility.c
deleted file mode 100644
index ffd323347..000000000
--- a/mdk-stage1/insmod-busybox/utility.c
+++ /dev/null
@@ -1,1759 +0,0 @@
-/* vi: set sw=4 ts=4: */
-/*
- * Utility routines.
- *
- * Copyright (C) tons of folks.  Tracking down who wrote what
- * isn't something I'm going to worry about...  If you wrote something
- * here, please feel free to acknowledge your work.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Based in part on code from sash, Copyright (c) 1999 by David I. Bell 
- * Permission has been granted to redistribute this code under the GPL.
- *
- */
-
-#include "busybox.h"
-#if defined (BB_CHMOD_CHOWN_CHGRP) \
- || defined (BB_CP_MV)		   \
- || defined (BB_FIND)		   \
- || defined (BB_INSMOD)		   \
- || defined (BB_LS)		   \
- || defined (BB_RM)		   \
- || defined (BB_TAR)
-/* same conditions as recursiveAction */
-#define bb_need_name_too_long
-#endif
-#define bb_need_memory_exhausted
-#define bb_need_full_version
-#define BB_DECLARE_EXTERN
-#include "messages.c"
-
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <dirent.h>
-#include <time.h>
-#include <utime.h>
-#include <unistd.h>
-#include <ctype.h>
-#include <sys/ioctl.h>
-#include <sys/utsname.h>		/* for uname(2) */
-
-/* Busybox mount uses either /proc/filesystems or /dev/mtab to get the 
- * list of available filesystems used for the -t auto option */ 
-#if defined BB_FEATURE_USE_PROCFS && defined BB_FEATURE_USE_DEVPS_PATCH
-//#error Sorry, but busybox can't use both /proc and /dev/ps at the same time -- Pick one and try again.
-#error "Sorry, but busybox can't use both /proc and /dev/ps at the same time -- Pick one and try again."
-#endif
-
-
-#if defined BB_MOUNT || defined BB_UMOUNT || defined BB_DF
-#  if defined BB_MTAB
-const char mtab_file[] = "/etc/mtab";
-#  else
-#    if defined BB_FEATURE_USE_PROCFS
-const char mtab_file[] = "/proc/mounts";
-#    else
-#      if defined BB_FEATURE_USE_DEVPS_PATCH
-const char mtab_file[] = "/dev/mtab";
-#    else
-#        error With (BB_MOUNT||BB_UMOUNT||BB_DF) defined, you must define either BB_MTAB or ( BB_FEATURE_USE_PROCFS | BB_FEATURE_USE_DEVPS_PATCH)
-#    endif
-#  endif
-#  endif
-#endif
-
-#ifdef _STANDALONE_
-void errorMsg(const char *s, ...)
-{
-	va_list p;
-
-	fflush(stdout);
-	printf("busybox: ");
-	va_start(p, s);
-	vprintf(s, p);
-	va_end(p);
-	printf("\n");
-	fflush(stdout);
-}
-
-extern void logperror(char *s)
-{
-		perror(s);
-}
-
-void fatalError(const char *s, ...)
-{
-	va_list p;
-
-	fflush(stdout);
-	fprintf(stdout, "busybox: ");
-	va_start(p, s);
-	vfprintf(stdout, s, p);
-	va_end(p);
-	fprintf(stdout, "\n");
-	fflush(stdout);
-	exit(FALSE);
-}
-#else /* _STANDALONE_ */
-#include "../log.h"
-extern void errorMsg(const char *s, ...)
-{
-	va_list p;
-
-	va_start(p, s);
-	vlog_message(s, p);
-	va_end(p);
-}
-
-extern void logperror(char *s)
-{
-		log_perror(s);
-}
-
-extern void fatalError(const char *s, ...)
-{
-	va_list p;
-
-	va_start(p, s);
-	vlog_message(s, p);
-	va_end(p);
-	while (1);
-}
-#endif /* _STANDALONE_ */
-
-
-#if defined BB_INIT
-/* Returns kernel version encoded as major*65536 + minor*256 + patch,
- * so, for example,  to check if the kernel is greater than 2.2.11:
- *     if (get_kernel_revision() <= 2*65536+2*256+11) { <stuff> }
- */
-extern int get_kernel_revision(void)
-{
-	struct utsname name;
-	int major = 0, minor = 0, patch = 0;
-
-	if (uname(&name) == -1) {
-		perror("cannot get system information");
-		return (0);
-	}
-	sscanf(name.version, "%d.%d.%d", &major, &minor, &patch);
-	return major * 65536 + minor * 256 + patch;
-}
-#endif                                                 /* BB_INIT */
-
-
-
-#if defined BB_FREE || defined BB_INIT || defined BB_UNAME || defined BB_UPTIME
-_syscall1(int, sysinfo, struct sysinfo *, info);
-#endif                                                 /* BB_INIT */
-
-#if defined BB_MOUNT || defined BB_UMOUNT
-
-#ifndef __NR_umount2
-#define __NR_umount2           52
-#endif
-
-/* Include our own version of <sys/mount.h>, since libc5 doesn't
- * know about umount2 */
-extern _syscall1(int, umount, const char *, special_file);
-extern _syscall2(int, umount2, const char *, special_file, int, flags);
-extern _syscall5(int, mount, const char *, special_file, const char *, dir,
-		const char *, fstype, unsigned long int, rwflag, const void *, data);
-#endif
-
-#if defined BB_INSMOD || defined BB_LSMOD
-#ifndef __NR_query_module
-#define __NR_query_module     167
-#endif
-_syscall5(int, query_module, const char *, name, int, which,
-		void *, buf, size_t, bufsize, size_t*, ret);
-#endif
-
-
-#if defined (BB_CP_MV) || defined (BB_DU)
-
-#define HASH_SIZE	311		/* Should be prime */
-#define hash_inode(i)	((i) % HASH_SIZE)
-
-static ino_dev_hashtable_bucket_t *ino_dev_hashtable[HASH_SIZE];
-
-/*
- * Return 1 if statbuf->st_ino && statbuf->st_dev are recorded in
- * `ino_dev_hashtable', else return 0
- *
- * If NAME is a non-NULL pointer to a character pointer, and there is
- * a match, then set *NAME to the value of the name slot in that
- * bucket.
- */
-int is_in_ino_dev_hashtable(const struct stat *statbuf, char **name)
-{
-	ino_dev_hashtable_bucket_t *bucket;
-
-	bucket = ino_dev_hashtable[hash_inode(statbuf->st_ino)];
-	while (bucket != NULL) {
-	  if ((bucket->ino == statbuf->st_ino) &&
-		  (bucket->dev == statbuf->st_dev))
-	  {
-		if (name) *name = bucket->name;
-		return 1;
-	  }
-	  bucket = bucket->next;
-	}
-	return 0;
-}
-
-/* Add statbuf to statbuf hash table */
-void add_to_ino_dev_hashtable(const struct stat *statbuf, const char *name)
-{
-	int i;
-	size_t s;
-	ino_dev_hashtable_bucket_t *bucket;
-    
-	i = hash_inode(statbuf->st_ino);
-	s = name ? strlen(name) : 0;
-	bucket = xmalloc(sizeof(ino_dev_hashtable_bucket_t) + s);
-	bucket->ino = statbuf->st_ino;
-	bucket->dev = statbuf->st_dev;
-	if (name)
-		strcpy(bucket->name, name);
-	else
-		bucket->name[0] = '\0';
-	bucket->next = ino_dev_hashtable[i];
-	ino_dev_hashtable[i] = bucket;
-}
-
-/* Clear statbuf hash table */
-void reset_ino_dev_hashtable(void)
-{
-	int i;
-	ino_dev_hashtable_bucket_t *bucket;
-
-	for (i = 0; i < HASH_SIZE; i++) {
-		while (ino_dev_hashtable[i] != NULL) {
-			bucket = ino_dev_hashtable[i]->next;
-			free(ino_dev_hashtable[i]);
-			ino_dev_hashtable[i] = bucket;
-		}
-	}
-}
-
-#endif /* BB_CP_MV || BB_DU */
-
-#if defined (BB_CP_MV) || defined (BB_DU) || defined (BB_LN) || defined (BB_AR)
-/*
- * Return TRUE if a fileName is a directory.
- * Nonexistant files return FALSE.
- */
-int isDirectory(const char *fileName, const int followLinks, struct stat *statBuf)
-{
-	int status;
-	int didMalloc = 0;
-
-	if (statBuf == NULL) {
-	    statBuf = (struct stat *)xmalloc(sizeof(struct stat));
-	    ++didMalloc;
-	}
-
-	if (followLinks == TRUE)
-		status = stat(fileName, statBuf);
-	else
-		status = lstat(fileName, statBuf);
-
-	if (status < 0 || !(S_ISDIR(statBuf->st_mode))) {
-	    status = FALSE;
-	}
-	else status = TRUE;
-
-	if (didMalloc) {
-	    free(statBuf);
-	    statBuf = NULL;
-	}
-	return status;
-}
-#endif
-
-#if defined (BB_AR) || defined BB_CP_MV
-/*
- * Copy readSize bytes between two file descriptors
- */
-int copySubFile(int srcFd, int dstFd, size_t remaining)
-{
-        size_t size;
-        char buffer[BUFSIZ];
-
-        while (remaining > 0) {
-                if (remaining > BUFSIZ)
-                        size = BUFSIZ;
-                else
-                        size = remaining;
-                if (fullWrite(dstFd, buffer, fullRead(srcFd, buffer, size)) < size)
-                        return(FALSE);
-                remaining -= size;
-        }
-        return (TRUE);
-}
-#endif
-
-
-#if defined (BB_CP_MV)
-/*
- * Copy one file to another, while possibly preserving its modes, times, and
- * modes.  Returns TRUE if successful, or FALSE on a failure with an error
- * message output.  (Failure is not indicated if attributes cannot be set.)
- * -Erik Andersen
- */
-int
-copyFile(const char *srcName, const char *destName,
-		 int setModes, int followLinks, int forceFlag)
-{
-	int rfd;
-	int wfd;
-	int status;
-	struct stat srcStatBuf;
-	struct stat dstStatBuf;
-	struct utimbuf times;
-
-	if (followLinks == TRUE)
-		status = stat(srcName, &srcStatBuf);
-	else
-		status = lstat(srcName, &srcStatBuf);
-
-	if (status < 0) {
-		perror(srcName);
-		return FALSE;
-	}
-
-	if (followLinks == TRUE)
-		status = stat(destName, &dstStatBuf);
-	else
-		status = lstat(destName, &dstStatBuf);
-
-	if (status < 0 || forceFlag==TRUE) {
-		unlink(destName);
-		dstStatBuf.st_ino = -1;
-		dstStatBuf.st_dev = -1;
-	}
-
-	if ((srcStatBuf.st_dev == dstStatBuf.st_dev) &&
-		(srcStatBuf.st_ino == dstStatBuf.st_ino)) {
-		errorMsg("Copying file \"%s\" to itself\n", srcName);
-		return FALSE;
-	}
-
-	if (S_ISDIR(srcStatBuf.st_mode)) {
-		//fprintf(stderr, "copying directory %s to %s\n", srcName, destName);
-		/* Make sure the directory is writable */
-		status = mkdir(destName, 0777777 ^ umask(0));
-		if (status < 0 && errno != EEXIST) {
-			perror(destName);
-			return FALSE;
-		}
-	} else if (S_ISLNK(srcStatBuf.st_mode)) {
-		char link_val[BUFSIZ + 1];
-		int link_size;
-
-		//fprintf(stderr, "copying link %s to %s\n", srcName, destName);
-		/* Warning: This could possibly truncate silently, to BUFSIZ chars */
-		link_size = readlink(srcName, &link_val[0], BUFSIZ);
-		if (link_size < 0) {
-			perror(srcName);
-			return FALSE;
-		}
-		link_val[link_size] = '\0';
-		status = symlink(link_val, destName);
-		if (status < 0) {
-			perror(destName);
-			return FALSE;
-		}
-#if (__GLIBC__ >= 2) && (__GLIBC_MINOR__ >= 1)
-		if (setModes == TRUE) {
-			/* Try to set owner, but fail silently like GNU cp */
-			lchown(destName, srcStatBuf.st_uid, srcStatBuf.st_gid);
-		}
-#endif
-		return TRUE;
-	} else if (S_ISFIFO(srcStatBuf.st_mode)) {
-		//fprintf(stderr, "copying fifo %s to %s\n", srcName, destName);
-		if (mkfifo(destName, 0644) < 0) {
-			perror(destName);
-			return FALSE;
-		}
-	} else if (S_ISBLK(srcStatBuf.st_mode) || S_ISCHR(srcStatBuf.st_mode)
-			   || S_ISSOCK(srcStatBuf.st_mode)) {
-		//fprintf(stderr, "copying soc, blk, or chr %s to %s\n", srcName, destName);
-		if (mknod(destName, srcStatBuf.st_mode, srcStatBuf.st_rdev) < 0) {
-			perror(destName);
-			return FALSE;
-		}
-	} else if (S_ISREG(srcStatBuf.st_mode)) {
-		//fprintf(stderr, "copying regular file %s to %s\n", srcName, destName);
-		rfd = open(srcName, O_RDONLY);
-		if (rfd < 0) {
-			perror(srcName);
-			return FALSE;
-		}
-
-	 	wfd = open(destName, O_WRONLY | O_CREAT | O_TRUNC,
-				 srcStatBuf.st_mode);
-		if (wfd < 0) {
-			perror(destName);
-			close(rfd);
-			return FALSE;
-		}
-
-		if (copySubFile(rfd, wfd, srcStatBuf.st_size)==FALSE)
-			goto error_exit;	
-		
-		close(rfd);
-		if (close(wfd) < 0) {
-			return FALSE;
-		}
-	}
-
-	if (setModes == TRUE) {
-		/* This is fine, since symlinks never get here */
-		if (chown(destName, srcStatBuf.st_uid, srcStatBuf.st_gid) < 0) {
-			perror(destName);
-			exit FALSE;
-		}
-		if (chmod(destName, srcStatBuf.st_mode) < 0) {
-			perror(destName);
-			exit FALSE;
-		}
-		times.actime = srcStatBuf.st_atime;
-		times.modtime = srcStatBuf.st_mtime;
-		if (utime(destName, &times) < 0) {
-			perror(destName);
-			exit FALSE;
-		}
-	}
-
-	return TRUE;
-
-  error_exit:
-	perror(destName);
-	close(rfd);
-	close(wfd);
-
-	return FALSE;
-}
-#endif							/* BB_CP_MV */
-
-
-
-#if defined BB_TAR || defined BB_LS ||defined BB_AR
-
-#define TYPEINDEX(mode) (((mode) >> 12) & 0x0f)
-#define TYPECHAR(mode)  ("0pcCd?bB-?l?s???" [TYPEINDEX(mode)])
-
-/* The special bits. If set, display SMODE0/1 instead of MODE0/1 */
-static const mode_t SBIT[] = {
-	0, 0, S_ISUID,
-	0, 0, S_ISGID,
-	0, 0, S_ISVTX
-};
-
-/* The 9 mode bits to test */
-static const mode_t MBIT[] = {
-	S_IRUSR, S_IWUSR, S_IXUSR,
-	S_IRGRP, S_IWGRP, S_IXGRP,
-	S_IROTH, S_IWOTH, S_IXOTH
-};
-
-#define MODE1  "rwxrwxrwx"
-#define MODE0  "---------"
-#define SMODE1 "..s..s..t"
-#define SMODE0 "..S..S..T"
-
-/*
- * Return the standard ls-like mode string from a file mode.
- * This is static and so is overwritten on each call.
- */
-const char *modeString(int mode)
-{
-	static char buf[12];
-
-	int i;
-
-	buf[0] = TYPECHAR(mode);
-	for (i = 0; i < 9; i++) {
-		if (mode & SBIT[i])
-			buf[i + 1] = (mode & MBIT[i]) ? SMODE1[i] : SMODE0[i];
-		else
-			buf[i + 1] = (mode & MBIT[i]) ? MODE1[i] : MODE0[i];
-	}
-	return buf;
-}
-#endif							/* BB_TAR || BB_LS */
-
-
-#if defined BB_TAR || defined BB_AR
-/*
- * Return the standard ls-like time string from a time_t
- * This is static and so is overwritten on each call.
- */
-const char *timeString(time_t timeVal)
-{
-	time_t now;
-	char *str;
-	static char buf[26];
-
-	time(&now);
-
-	str = ctime(&timeVal);
-
-	strcpy(buf, &str[4]);
-	buf[12] = '\0';
-
-	if ((timeVal > now) || (timeVal < now - 365 * 24 * 60 * 60L)) {
-		strcpy(&buf[7], &str[20]);
-		buf[11] = '\0';
-	}
-
-	return buf;
-}
-#endif /* BB_TAR || BB_AR */
-
-#if defined BB_TAR || defined BB_CP_MV || defined BB_AR
-/*
- * Write all of the supplied buffer out to a file.
- * This does multiple writes as necessary.
- * Returns the amount written, or -1 on an error.
- */
-int fullWrite(int fd, const char *buf, int len)
-{
-	int cc;
-	int total;
-
-	total = 0;
-
-	while (len > 0) {
-		cc = write(fd, buf, len);
-
-		if (cc < 0)
-			return -1;
-
-		buf += cc;
-		total += cc;
-		len -= cc;
-	}
-
-	return total;
-}
-#endif /* BB_TAR || BB_CP_MV || BB_AR */
-
-
-#if defined BB_TAR || defined BB_TAIL || defined BB_AR || defined BB_SH || defined BB_CP_MV
-/*
- * Read all of the supplied buffer from a file.
- * This does multiple reads as necessary.
- * Returns the amount read, or -1 on an error.
- * A short read is returned on an end of file.
- */
-int fullRead(int fd, char *buf, int len)
-{
-	int cc;
-	int total;
-
-	total = 0;
-
-	while (len > 0) {
-		cc = read(fd, buf, len);
-
-		if (cc < 0)
-			return -1;
-
-		if (cc == 0)
-			break;
-
-		buf += cc;
-		total += cc;
-		len -= cc;
-	}
-
-	return total;
-}
-#endif /* BB_TAR || BB_TAIL || BB_AR || BB_SH */
-
-
-#if defined (BB_CHMOD_CHOWN_CHGRP) \
- || defined (BB_CP_MV)			\
- || defined (BB_FIND)			\
- || defined (BB_INSMOD)			\
- || defined (BB_LS)				\
- || defined (BB_RM)				\
- || defined (BB_TAR)
-
-/*
- * Walk down all the directories under the specified 
- * location, and do something (something specified
- * by the fileAction and dirAction function pointers).
- *
- * Unfortunatly, while nftw(3) could replace this and reduce 
- * code size a bit, nftw() wasn't supported before GNU libc 2.1, 
- * and so isn't sufficiently portable to take over since glibc2.1
- * is so stinking huge.
- */
-int recursiveAction(const char *fileName,
-					int recurse, int followLinks, int depthFirst,
-					int (*fileAction) (const char *fileName,
-									   struct stat * statbuf,
-									   void* userData),
-					int (*dirAction) (const char *fileName,
-									  struct stat * statbuf,
-									  void* userData),
-					void* userData)
-{
-	int status;
-	struct stat statbuf;
-	struct dirent *next;
-
-	if (followLinks == TRUE)
-		status = stat(fileName, &statbuf);
-	else
-		status = lstat(fileName, &statbuf);
-
-	if (status < 0) {
-#ifdef BB_DEBUG_PRINT_SCAFFOLD
-		fprintf(stderr,
-				"status=%d followLinks=%d TRUE=%d\n",
-				status, followLinks, TRUE);
-#endif
-		perror(fileName);
-		return FALSE;
-	}
-
-	if ((followLinks == FALSE) && (S_ISLNK(statbuf.st_mode))) {
-		if (fileAction == NULL)
-			return TRUE;
-		else
-			return fileAction(fileName, &statbuf, userData);
-	}
-
-	if (recurse == FALSE) {
-		if (S_ISDIR(statbuf.st_mode)) {
-			if (dirAction != NULL)
-				return (dirAction(fileName, &statbuf, userData));
-			else
-				return TRUE;
-		}
-	}
-
-	if (S_ISDIR(statbuf.st_mode)) {
-		DIR *dir;
-
-		dir = opendir(fileName);
-		if (!dir) {
-			perror(fileName);
-			return FALSE;
-		}
-		if (dirAction != NULL && depthFirst == FALSE) {
-			status = dirAction(fileName, &statbuf, userData);
-			if (status == FALSE) {
-				perror(fileName);
-				return FALSE;
-			}
-		}
-		while ((next = readdir(dir)) != NULL) {
-			char nextFile[BUFSIZ + 1];
-
-			if ((strcmp(next->d_name, "..") == 0)
-				|| (strcmp(next->d_name, ".") == 0)) {
-				continue;
-			}
-			if (strlen(fileName) + strlen(next->d_name) + 1 > BUFSIZ) {
-				errorMsg("name_too_long");
-				return FALSE;
-			}
-			memset(nextFile, 0, sizeof(nextFile));
-			sprintf(nextFile, "%s/%s", fileName, next->d_name);
-			status =
-				recursiveAction(nextFile, TRUE, followLinks, depthFirst,
-								fileAction, dirAction, userData);
-			if (status == FALSE) {
-				closedir(dir);
-				return FALSE;
-			}
-		}
-		status = closedir(dir);
-		if (status < 0) {
-			perror(fileName);
-			return FALSE;
-		}
-		if (dirAction != NULL && depthFirst == TRUE) {
-			status = dirAction(fileName, &statbuf, userData);
-			if (status == FALSE) {
-				perror(fileName);
-				return FALSE;
-			}
-		}
-	} else {
-		if (fileAction == NULL)
-			return TRUE;
-		else
-			return fileAction(fileName, &statbuf, userData);
-	}
-	return TRUE;
-}
-
-#endif							/* BB_CHMOD_CHOWN_CHGRP || BB_CP_MV || BB_FIND || BB_LS || BB_INSMOD */
-
-
-
-#if defined (BB_TAR) || defined (BB_MKDIR) || defined (BB_AR)
-/*
- * Attempt to create the directories along the specified path, except for
- * the final component.  The mode is given for the final directory only,
- * while all previous ones get default protections.  Errors are not reported
- * here, as failures to restore files can be reported later.
- */
-extern int createPath(const char *name, int mode)
-{
-	char *cp;
-	char *cpOld;
-	char buf[BUFSIZ + 1];
-	int retVal = 0;
-
-	strcpy(buf, name);
-	for (cp = buf; *cp == '/'; cp++);
-	cp = strchr(cp, '/');
-	while (cp) {
-		cpOld = cp;
-		cp = strchr(cp + 1, '/');
-		*cpOld = '\0';
-		retVal = mkdir(buf, cp ? 0777 : mode);
-		if (retVal != 0 && errno != EEXIST) {
-			perror(buf);
-			return FALSE;
-		}
-		*cpOld = '/';
-	}
-	return TRUE;
-}
-#endif							/* BB_TAR || BB_MKDIR */
-
-
-
-#if defined (BB_CHMOD_CHOWN_CHGRP) || defined (BB_MKDIR) \
- || defined (BB_MKFIFO) || defined (BB_MKNOD) || defined (BB_AR)
-/* [ugoa]{+|-|=}[rwxst] */
-
-
-
-extern int parse_mode(const char *s, mode_t * theMode)
-{
-	mode_t andMode =
-
-		S_ISVTX | S_ISUID | S_ISGID | S_IRWXU | S_IRWXG | S_IRWXO;
-	mode_t orMode = 0;
-	mode_t mode = 0;
-	mode_t groups = 0;
-	char type;
-	char c;
-
-	if (s==NULL)
-		return (FALSE);
-
-	do {
-		for (;;) {
-			switch (c = *s++) {
-			case '\0':
-				return -1;
-			case 'u':
-				groups |= S_ISUID | S_IRWXU;
-				continue;
-			case 'g':
-				groups |= S_ISGID | S_IRWXG;
-				continue;
-			case 'o':
-				groups |= S_IRWXO;
-				continue;
-			case 'a':
-				groups |= S_ISUID | S_ISGID | S_IRWXU | S_IRWXG | S_IRWXO;
-				continue;
-			case '+':
-			case '=':
-			case '-':
-				type = c;
-				if (groups == 0)	/* The default is "all" */
-					groups |=
-						S_ISUID | S_ISGID | S_IRWXU | S_IRWXG | S_IRWXO;
-				break;
-			default:
-				if (isdigit(c) && c >= '0' && c <= '7' &&
-					mode == 0 && groups == 0) {
-					*theMode = strtol(--s, NULL, 8);
-					return (TRUE);
-				} else
-					return (FALSE);
-			}
-			break;
-		}
-
-		while ((c = *s++) != '\0') {
-			switch (c) {
-			case ',':
-				break;
-			case 'r':
-				mode |= S_IRUSR | S_IRGRP | S_IROTH;
-				continue;
-			case 'w':
-				mode |= S_IWUSR | S_IWGRP | S_IWOTH;
-				continue;
-			case 'x':
-				mode |= S_IXUSR | S_IXGRP | S_IXOTH;
-				continue;
-			case 's':
-				mode |= S_IXGRP | S_ISUID | S_ISGID;
-				continue;
-			case 't':
-				mode |= 0;
-				continue;
-			default:
-				*theMode &= andMode;
-				*theMode |= orMode;
-				return (TRUE);
-			}
-			break;
-		}
-		switch (type) {
-		case '=':
-			andMode &= ~(groups);
-			/* fall through */
-		case '+':
-			orMode |= mode & groups;
-			break;
-		case '-':
-			andMode &= ~(mode & groups);
-			orMode &= andMode;
-			break;
-		}
-	} while (c == ',');
-	*theMode &= andMode;
-	*theMode |= orMode;
-	return (TRUE);
-}
-
-
-#endif
-/* BB_CHMOD_CHOWN_CHGRP || BB_MKDIR || BB_MKFIFO || BB_MKNOD */
-
-
-
-
-
-#if defined BB_CHMOD_CHOWN_CHGRP || defined BB_PS || defined BB_LS \
- || defined BB_TAR || defined BB_ID || defined BB_LOGGER \
- || defined BB_LOGNAME || defined BB_WHOAMI
-
-/* This parses entries in /etc/passwd and /etc/group.  This is desirable
- * for BusyBox, since we want to avoid using the glibc NSS stuff, which
- * increases target size and is often not needed or wanted for embedded
- * systems.
- *
- * /etc/passwd entries look like this: 
- *		root:x:0:0:root:/root:/bin/bash
- * and /etc/group entries look like this: 
- *		root:x:0:
- *
- * This uses buf as storage to hold things.
- * 
- */
-unsigned long my_getid(const char *filename, char *name, long id, long *gid)
-{
-	FILE *file;
-	char *rname, *start, *end, buf[128];
-	long rid;
-	long rgid = 0;
-
-	file = fopen(filename, "r");
-	if (file == NULL) {
-		/* Do not complain.  It is ok for /etc/passwd and
-		 * friends to be missing... */
-		return (-1);
-	}
-
-	while (fgets(buf, 128, file) != NULL) {
-		if (buf[0] == '#')
-			continue;
-
-		/* username/group name */
-		start = buf;
-		end = strchr(start, ':');
-		if (end == NULL)
-			continue;
-		*end = '\0';
-		rname = start;
-
-		/* password */
-		start = end + 1;
-		end = strchr(start, ':');
-		if (end == NULL)
-			continue;
-
-		/* uid in passwd, gid in group */
-		start = end + 1;
-		rid = (unsigned long) strtol(start, &end, 10);
-		if (end == start)
-			continue;
-
-		/* gid in passwd */
-		start = end + 1;
-		rgid = (unsigned long) strtol(start, &end, 10);
-		
-		if (name) {
-			if (0 == strcmp(rname, name)) {
-			    if (gid) *gid = rgid;
-				fclose(file);
-				return (rid);
-			}
-		}
-		if (id != -1 && id == rid) {
-			strncpy(name, rname, 8);
-			if (gid) *gid = rgid;
-			fclose(file);
-			return (TRUE);
-		}
-	}
-	fclose(file);
-	return (-1);
-}
-
-/* returns a uid given a username */
-long my_getpwnam(char *name)
-{
-	return my_getid("/etc/passwd", name, -1, NULL);
-}
-
-/* returns a gid given a group name */
-long my_getgrnam(char *name)
-{
-	return my_getid("/etc/group", name, -1, NULL);
-}
-
-/* gets a username given a uid */
-void my_getpwuid(char *name, long uid)
-{
-	my_getid("/etc/passwd", name, uid, NULL);
-}
-
-/* gets a groupname given a gid */
-void my_getgrgid(char *group, long gid)
-{
-	my_getid("/etc/group", group, gid, NULL);
-}
-
-/* gets a gid given a user name */
-long my_getpwnamegid(char *name)
-{
-	long gid;
-	my_getid("/etc/passwd", name, -1, &gid);
-	return gid;
-}
-
-#endif
- /* BB_CHMOD_CHOWN_CHGRP || BB_PS || BB_LS || BB_TAR \
- || BB_ID || BB_LOGGER || BB_LOGNAME || BB_WHOAMI */
-
-
-#if (defined BB_CHVT) || (defined BB_DEALLOCVT) || (defined BB_SETKEYCODES)
-
-/* From <linux/kd.h> */ 
-#define KDGKBTYPE       0x4B33  /* get keyboard type */
-#define         KB_84           0x01
-#define         KB_101          0x02    /* this is what we always answer */
-
-int is_a_console(int fd)
-{
-	char arg;
-
-	arg = 0;
-	return (ioctl(fd, KDGKBTYPE, &arg) == 0
-			&& ((arg == KB_101) || (arg == KB_84)));
-}
-
-static int open_a_console(char *fnam)
-{
-	int fd;
-
-	/* try read-only */
-	fd = open(fnam, O_RDWR);
-
-	/* if failed, try read-only */
-	if (fd < 0 && errno == EACCES)
-		fd = open(fnam, O_RDONLY);
-
-	/* if failed, try write-only */
-	if (fd < 0 && errno == EACCES)
-		fd = open(fnam, O_WRONLY);
-
-	/* if failed, fail */
-	if (fd < 0)
-		return -1;
-
-	/* if not a console, fail */
-	if (!is_a_console(fd)) {
-		close(fd);
-		return -1;
-	}
-
-	/* success */
-	return fd;
-}
-
-/*
- * Get an fd for use with kbd/console ioctls.
- * We try several things because opening /dev/console will fail
- * if someone else used X (which does a chown on /dev/console).
- *
- * if tty_name is non-NULL, try this one instead.
- */
-
-int get_console_fd(char *tty_name)
-{
-	int fd;
-
-	if (tty_name) {
-		if (-1 == (fd = open_a_console(tty_name)))
-			return -1;
-		else
-			return fd;
-	}
-
-	fd = open_a_console("/dev/tty");
-	if (fd >= 0)
-		return fd;
-
-	fd = open_a_console("/dev/tty0");
-	if (fd >= 0)
-		return fd;
-
-	fd = open_a_console("/dev/console");
-	if (fd >= 0)
-		return fd;
-
-	for (fd = 0; fd < 3; fd++)
-		if (is_a_console(fd))
-			return fd;
-
-	errorMsg("Couldnt get a file descriptor referring to the console\n");
-	return -1;					/* total failure */
-}
-
-
-#endif							/* BB_CHVT || BB_DEALLOCVT || BB_SETKEYCODES */
-
-
-#if defined BB_FIND || defined BB_INSMOD
-/*
- * Routine to see if a text string is matched by a wildcard pattern.
- * Returns TRUE if the text is matched, or FALSE if it is not matched
- * or if the pattern is invalid.
- *  *		matches zero or more characters
- *  ?		matches a single character
- *  [abc]	matches 'a', 'b' or 'c'
- *  \c		quotes character c
- * Adapted from code written by Ingo Wilken, and
- * then taken from sash, Copyright (c) 1999 by David I. Bell
- * Permission is granted to use, distribute, or modify this source,
- * provided that this copyright notice remains intact.
- * Permission to distribute this code under the GPL has been granted.
- */
-extern int check_wildcard_match(const char *text, const char *pattern)
-{
-	const char *retryPat;
-	const char *retryText;
-	int ch;
-	int found;
-	int len;
-
-	retryPat = NULL;
-	retryText = NULL;
-
-	while (*text || *pattern) {
-		ch = *pattern++;
-
-		switch (ch) {
-		case '*':
-			retryPat = pattern;
-			retryText = text;
-			break;
-
-		case '[':
-			found = FALSE;
-
-			while ((ch = *pattern++) != ']') {
-				if (ch == '\\')
-					ch = *pattern++;
-
-				if (ch == '\0')
-					return FALSE;
-
-				if (*text == ch)
-					found = TRUE;
-			}
-			len=strlen(text);
-			if (found == FALSE && len!=0) {
-				return FALSE;
-			}
-			if (found == TRUE) {
-				if (strlen(pattern)==0 && len==1) {
-					return TRUE;
-				}
-				if (len!=0) {
-					text++;
-					continue;
-				}
-			}
-
-			/* fall into next case */
-
-		case '?':
-			if (*text++ == '\0')
-				return FALSE;
-
-			break;
-
-		case '\\':
-			ch = *pattern++;
-
-			if (ch == '\0')
-				return FALSE;
-
-			/* fall into next case */
-
-		default:
-			if (*text == ch) {
-				if (*text)
-					text++;
-				break;
-			}
-
-			if (*text) {
-				pattern = retryPat;
-				text = ++retryText;
-				break;
-			}
-
-			return FALSE;
-		}
-
-		if (pattern == NULL)
-			return FALSE;
-	}
-
-	return TRUE;
-}
-#endif                            /* BB_FIND || BB_INSMOD */
-
-
-
-
-#if defined BB_DF || defined BB_MTAB
-/*
- * Given a block device, find the mount table entry if that block device
- * is mounted.
- *
- * Given any other file (or directory), find the mount table entry for its
- * filesystem.
- */
-extern struct mntent *findMountPoint(const char *name, const char *table)
-{
-	struct stat s;
-	dev_t mountDevice;
-	FILE *mountTable;
-	struct mntent *mountEntry;
-
-	if (stat(name, &s) != 0)
-		return 0;
-
-	if ((s.st_mode & S_IFMT) == S_IFBLK)
-		mountDevice = s.st_rdev;
-	else
-		mountDevice = s.st_dev;
-
-
-	if ((mountTable = setmntent(table, "r")) == 0)
-		return 0;
-
-	while ((mountEntry = getmntent(mountTable)) != 0) {
-		if (strcmp(name, mountEntry->mnt_dir) == 0
-			|| strcmp(name, mountEntry->mnt_fsname) == 0)	/* String match. */
-			break;
-		if (stat(mountEntry->mnt_fsname, &s) == 0 && s.st_rdev == mountDevice)	/* Match the device. */
-			break;
-		if (stat(mountEntry->mnt_dir, &s) == 0 && s.st_dev == mountDevice)	/* Match the directory's mount point. */
-			break;
-	}
-	endmntent(mountTable);
-	return mountEntry;
-}
-#endif							/* BB_DF || BB_MTAB */
-
-
-
-#if defined BB_DD || defined BB_TAIL
-/*
- * Read a number with a possible multiplier.
- * Returns -1 if the number format is illegal.
- */
-extern long getNum(const char *cp)
-{
-	long value;
-
-	if (!isDecimal(*cp))
-		return -1;
-
-	value = 0;
-
-	while (isDecimal(*cp))
-		value = value * 10 + *cp++ - '0';
-
-	switch (*cp++) {
-	case 'M':
-	case 'm':					/* `tail' uses it traditionally */
-		value *= 1048576;
-		break;
-
-	case 'k':
-		value *= 1024;
-		break;
-
-	case 'b':
-		value *= 512;
-		break;
-
-	case 'w':
-		value *= 2;
-		break;
-
-	case '\0':
-		return value;
-
-	default:
-		return -1;
-	}
-
-	if (*cp)
-		return -1;
-
-	return value;
-}
-#endif							/* BB_DD || BB_TAIL */
-
-
-#if defined BB_INIT || defined BB_SYSLOGD 
-/* try to open up the specified device */
-extern int device_open(char *device, int mode)
-{
-	int m, f, fd = -1;
-
-	m = mode | O_NONBLOCK;
-
-	/* Retry up to 5 times */
-	for (f = 0; f < 5; f++)
-		if ((fd = open(device, m, 0600)) >= 0)
-			break;
-	if (fd < 0)
-		return fd;
-	/* Reset original flags. */
-	if (m != mode)
-		fcntl(fd, F_SETFL, mode);
-	return fd;
-}
-#endif							/* BB_INIT BB_SYSLOGD */
-
-
-#if defined BB_KILLALL || ( defined BB_FEATURE_LINUXRC && ( defined BB_HALT || defined BB_REBOOT || defined BB_POWEROFF ))
-#ifdef BB_FEATURE_USE_DEVPS_PATCH
-#include <linux/devps.h> /* For Erik's nifty devps device driver */
-#endif
-
-#if defined BB_FEATURE_USE_DEVPS_PATCH
-/* findPidByName()
- *  
- *  This finds the pid of the specified process,
- *  by using the /dev/ps device driver.
- *
- *  Returns a list of all matching PIDs
- */
-extern pid_t* findPidByName( char* pidName)
-{
-	int fd, i, j;
-	char device[] = "/dev/ps";
-	pid_t num_pids;
-	pid_t* pid_array = NULL;
-	pid_t* pidList=NULL;
-
-	/* open device */ 
-	fd = open(device, O_RDONLY);
-	if (fd < 0)
-		fatalError( "open failed for `%s': %s\n", device, strerror (errno));
-
-	/* Find out how many processes there are */
-	if (ioctl (fd, DEVPS_GET_NUM_PIDS, &num_pids)<0) 
-		fatalError( "\nDEVPS_GET_PID_LIST: %s\n", strerror (errno));
-	
-	/* Allocate some memory -- grab a few extras just in case 
-	 * some new processes start up while we wait. The kernel will
-	 * just ignore any extras if we give it too many, and will trunc.
-	 * the list if we give it too few.  */
-	pid_array = (pid_t*) xcalloc( num_pids+10, sizeof(pid_t));
-	pid_array[0] = num_pids+10;
-
-	/* Now grab the pid list */
-	if (ioctl (fd, DEVPS_GET_PID_LIST, pid_array)<0) 
-		fatalError( "\nDEVPS_GET_PID_LIST: %s\n", strerror (errno));
-
-	/* Now search for a match */
-	for (i=1, j=0; i<pid_array[0] ; i++) {
-		char* p;
-		struct pid_info info;
-
-	    info.pid = pid_array[i];
-	    if (ioctl (fd, DEVPS_GET_PID_INFO, &info)<0)
-			fatalError( "\nDEVPS_GET_PID_INFO: %s\n", strerror (errno));
-
-		/* Make sure we only match on the process name */
-		p=info.command_line+1;
-		while ((*p != 0) && !isspace(*(p)) && (*(p-1) != '\\')) { 
-			(p)++;
-		}
-		if (isspace(*(p)))
-				*p='\0';
-
-		if ((strstr(info.command_line, pidName) != NULL)
-				&& (strlen(pidName) == strlen(info.command_line))) {
-			pidList=xrealloc( pidList, sizeof(pid_t) * (j+2));
-			pidList[j++]=info.pid;
-		}
-	}
-	if (pidList)
-		pidList[j]=0;
-
-	/* Free memory */
-	free( pid_array);
-
-	/* close device */
-	if (close (fd) != 0) 
-		fatalError( "close failed for `%s': %s\n",device, strerror (errno));
-
-	return pidList;
-}
-#else		/* BB_FEATURE_USE_DEVPS_PATCH */
-#if ! defined BB_FEATURE_USE_PROCFS
-#error Sorry, I depend on the /proc filesystem right now.
-#endif
-
-/* findPidByName()
- *  
- *  This finds the pid of the specified process.
- *  Currently, it's implemented by rummaging through 
- *  the proc filesystem.
- *
- *  Returns a list of all matching PIDs
- */
-extern pid_t* findPidByName( char* pidName)
-{
-	DIR *dir;
-	struct dirent *next;
-	pid_t* pidList=NULL;
-	int i=0;
-
-	dir = opendir("/proc");
-	if (!dir)
-		fatalError( "Cannot open /proc: %s\n", strerror (errno));
-	
-	while ((next = readdir(dir)) != NULL) {
-		FILE *status;
-		char filename[256];
-		char buffer[256];
-
-		/* If it isn't a number, we don't want it */
-		if (!isdigit(*next->d_name))
-			continue;
-
-		sprintf(filename, "/proc/%s/cmdline", next->d_name);
-		status = fopen(filename, "r");
-		if (!status) {
-			continue;
-		}
-		fgets(buffer, 256, status);
-		fclose(status);
-
-		if (strstr(get_last_path_component(buffer), pidName) != NULL) {
-			pidList=xrealloc( pidList, sizeof(pid_t) * (i+2));
-			pidList[i++]=strtol(next->d_name, NULL, 0);
-		}
-	}
-
-	if (pidList)
-		pidList[i]=0;
-	return pidList;
-}
-#endif							/* BB_FEATURE_USE_DEVPS_PATCH */
-#endif							/* BB_KILLALL || ( BB_FEATURE_LINUXRC && ( BB_HALT || BB_REBOOT || BB_POWEROFF )) */
-
-#ifndef DMALLOC
-/* this should really be farmed out to libbusybox.a */
-extern void *xmalloc(size_t size)
-{
-	void *ptr = malloc(size);
-
-	if (!ptr)
-		fatalError("memory_exhausted");
-	return ptr;
-}
-
-extern void *xrealloc(void *old, size_t size)
-{
-	void *ptr;
-	if (!size)
-			size = 1;
-	ptr = realloc(old, size);
-	if (!ptr)
-		fatalError("memory_exhausted");
-	return ptr;
-}
-
-extern void *xcalloc(size_t nmemb, size_t size)
-{
-	void *ptr = calloc(nmemb, size);
-	if (!ptr)
-		fatalError("memory_exhausted");
-	return ptr;
-}
-#endif
-
-#if defined BB_FEATURE_NFSMOUNT || defined BB_SH || defined BB_LS
-# ifndef DMALLOC
-extern char * xstrdup (const char *s) {
-	char *t;
-
-	if (s == NULL)
-		return NULL;
-
-	t = strdup (s);
-
-	if (t == NULL)
-		fatalError("memory_exhausted");
-
-	return t;
-}
-# endif
-#endif
-
-#if defined BB_FEATURE_NFSMOUNT
-extern char * xstrndup (const char *s, int n) {
-	char *t;
-
-	if (s == NULL)
-		fatalError("xstrndup bug");
-
-	t = xmalloc(n+1);
-	strncpy(t,s,n);
-	t[n] = 0;
-
-	return t;
-}
-#endif
-
-
-#if (__GLIBC__ < 2) && (defined BB_SYSLOGD || defined BB_INIT)
-extern int vdprintf(int d, const char *format, va_list ap)
-{
-	char buf[BUF_SIZE];
-	int len;
-
-	len = vsprintf(buf, format, ap);
-	return write(d, buf, len);
-}
-#endif							/* BB_SYSLOGD */
-
-
-#if defined BB_FEATURE_MOUNT_LOOP
-#include <fcntl.h>
-#include "loop.h" /* Pull in loop device support */
-
-extern int del_loop(const char *device)
-{
-	int fd;
-
-	if ((fd = open(device, O_RDONLY)) < 0) {
-		perror(device);
-		return (FALSE);
-	}
-	if (ioctl(fd, LOOP_CLR_FD, 0) < 0) {
-		perror("ioctl: LOOP_CLR_FD");
-		return (FALSE);
-	}
-	close(fd);
-	return (TRUE);
-}
-
-extern int set_loop(const char *device, const char *file, int offset,
-					int *loopro)
-{
-	struct loop_info loopinfo;
-	int fd, ffd, mode;
-
-	mode = *loopro ? O_RDONLY : O_RDWR;
-	if ((ffd = open(file, mode)) < 0 && !*loopro
-		&& (errno != EROFS || (ffd = open(file, mode = O_RDONLY)) < 0)) {
-		perror(file);
-		return 1;
-	}
-	if ((fd = open(device, mode)) < 0) {
-		close(ffd);
-		perror(device);
-		return 1;
-	}
-	*loopro = (mode == O_RDONLY);
-
-	memset(&loopinfo, 0, sizeof(loopinfo));
-	strncpy(loopinfo.lo_name, file, LO_NAME_SIZE);
-	loopinfo.lo_name[LO_NAME_SIZE - 1] = 0;
-
-	loopinfo.lo_offset = offset;
-
-	loopinfo.lo_encrypt_key_size = 0;
-	if (ioctl(fd, LOOP_SET_FD, ffd) < 0) {
-		perror("ioctl: LOOP_SET_FD");
-		close(fd);
-		close(ffd);
-		return 1;
-	}
-	if (ioctl(fd, LOOP_SET_STATUS, &loopinfo) < 0) {
-		(void) ioctl(fd, LOOP_CLR_FD, 0);
-		perror("ioctl: LOOP_SET_STATUS");
-		close(fd);
-		close(ffd);
-		return 1;
-	}
-	close(fd);
-	close(ffd);
-	return 0;
-}
-
-extern char *find_unused_loop_device(void)
-{
-	char dev[20];
-	int i, fd;
-	struct stat statbuf;
-	struct loop_info loopinfo;
-
-	for (i = 0; i <= 7; i++) {
-		sprintf(dev, "/dev/loop%d", i);
-		if (stat(dev, &statbuf) == 0 && S_ISBLK(statbuf.st_mode)) {
-			if ((fd = open(dev, O_RDONLY)) >= 0) {
-				if (ioctl(fd, LOOP_GET_STATUS, &loopinfo) == -1) {
-					if (errno == ENXIO) {	/* probably free */
-						close(fd);
-						return strdup(dev);
-					}
-				}
-				close(fd);
-			}
-		}
-	}
-	return NULL;
-}
-#endif							/* BB_FEATURE_MOUNT_LOOP */
-
-#if defined BB_MOUNT || defined BB_DF || ( defined BB_UMOUNT && ! defined BB_MTAB)
-extern int find_real_root_device_name(char* name)
-{
-	DIR *dir;
-	struct dirent *entry;
-	struct stat statBuf, rootStat;
-	char fileName[BUFSIZ];
-
-	if (stat("/", &rootStat) != 0) {
-		errorMsg("could not stat '/'\n");
-		return( FALSE);
-	}
-
-	dir = opendir("/dev");
-	if (!dir) {
-		errorMsg("could not open '/dev'\n");
-		return( FALSE);
-	}
-
-	while((entry = readdir(dir)) != NULL) {
-
-		/* Must skip ".." since that is "/", and so we 
-		 * would get a false positive on ".."  */
-		if (strcmp(entry->d_name, "..") == 0)
-			continue;
-
-		snprintf( fileName, strlen(name)+1, "/dev/%s", entry->d_name);
-
-		if (stat(fileName, &statBuf) != 0)
-			continue;
-		/* Some char devices have the same dev_t as block
-		 * devices, so make sure this is a block device */
-		if (! S_ISBLK(statBuf.st_mode))
-			continue;
-		if (statBuf.st_rdev == rootStat.st_rdev) {
-			strcpy(name, fileName); 
-			return ( TRUE);
-		}
-	}
-
-	return( FALSE);
-}
-#endif
-
-
-/* get_line_from_file() - This function reads an entire line from a text file
- * up to a newline. It returns a malloc'ed char * which must be stored and
- * free'ed  by the caller. */
-extern char *get_line_from_file(FILE *file)
-{
-	static const int GROWBY = 80; /* how large we will grow strings by */
-
-	int ch;
-	int idx = 0;
-	char *linebuf = NULL;
-	int linebufsz = 0;
-
-	while (1) {
-		ch = fgetc(file);
-		if (ch == EOF)
-			break;
-		/* grow the line buffer as necessary */
-		while (idx > linebufsz-2)
-			linebuf = xrealloc(linebuf, linebufsz += GROWBY);
-		linebuf[idx++] = (char)ch;
-		if ((char)ch == '\n')
-			break;
-	}
-
-	if (idx == 0)
-		return NULL;
-
-	linebuf[idx] = 0;
-	return linebuf;
-}
-
-#if defined BB_CAT
-extern void print_file(FILE *file)
-{
-	int c;
-
-	while ((c = getc(file)) != EOF)
-		putc(c, stdout);
-	fclose(file);
-	fflush(stdout);
-}
-
-extern int print_file_by_name(char *filename)
-{
-	FILE *file;
-	file = fopen(filename, "r");
-	if (file == NULL) {
-		return FALSE;
-	}
-	print_file(file);
-	return TRUE;
-}
-#endif /* BB_CAT || BB_LSMOD */
-
-#if defined BB_ECHO || defined BB_TR
-char process_escape_sequence(char **ptr)
-{
-	char c;
-
-	switch (c = *(*ptr)++) {
-	case 'a':
-		c = '\a';
-		break;
-	case 'b':
-		c = '\b';
-		break;
-	case 'f':
-		c = '\f';
-		break;
-	case 'n':
-		c = '\n';
-		break;
-	case 't':
-		c = '\t';
-		break;
-	case 'v':
-		c = '\v';
-		break;
-	case '\\':
-		c = '\\';
-		break;
-	case '0': case '1': case '2': case '3':
-	case '4': case '5': case '6': case '7':
-		c -= '0';
-		if ('0' <= **ptr && **ptr <= '7') {
-			c = c * 8 + (*(*ptr)++ - '0');
-			if ('0' <= **ptr && **ptr <= '7')
-				c = c * 8 + (*(*ptr)++ - '0');
-		}
-		break;
-	default:
-		(*ptr)--;
-		c = '\\';
-		break;
-	}
-	return c;
-}
-#endif
-
-#if defined BB_BASENAME || defined BB_LN || defined BB_SH
-char *get_last_path_component(char *path)
-{
-	char *s=path+strlen(path)-1;
-
-	/* strip trailing slashes */
-	while (s && *s == '/') {
-		*s-- = '\0';
-	}
-
-	/* find last component */
-	s = strrchr(path, '/');
-	if (s==NULL) return path;
-	else return s+1;
-}
-#endif
-
-#if defined BB_GREP || defined BB_SED
-void xregcomp(regex_t *preg, const char *regex, int cflags)
-{
-	int ret;
-	if ((ret = regcomp(preg, regex, cflags)) != 0) {
-		int errmsgsz = regerror(ret, preg, NULL, 0);
-		char *errmsg = xmalloc(errmsgsz);
-		regerror(ret, preg, errmsg, errmsgsz);
-		fatalError("bb_regcomp: %s\n", errmsg);
-	}
-}
-#endif
-
-/* END CODE */
-/*
-Local Variables:
-c-file-style: "linux"
-c-basic-offset: 4
-tab-width: 4
-End:
-*/
diff --git a/mdk-stage1/insmod-modutils/Makefile b/mdk-stage1/insmod-modutils/Makefile
deleted file mode 100644
index e8f78d2d0..000000000
--- a/mdk-stage1/insmod-modutils/Makefile
+++ /dev/null
@@ -1,63 +0,0 @@
- #******************************************************************************
- #
- #    insmod from modutils (generic)
- #
- # $Id$
- #
- # Copyright 1996, 1997 Linux International.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-INCS = -I./include
-
-DEFS = -Wno-error -D_GNU_SOURCE -DELF_MACHINE_H='"elf_$(ARCH).h"' -DARCH_$(ARCH)
-
-
-DIRS = util obj
-
-all: dirs insmod libinsmod.a #libinsmod-DIET.a
-
-dirs:
-	@for n in . $(DIRS); do \
-		[ "$$n" = "." ] || make -C $$n ;\
-	done
-
-clean:
-	@for n in $(DIRS); do \
-		(cd $$n; make clean) \
-	done
-	rm -rf t *.o insmod libinsmod.a libinsmod-DIET.a
-
-
-insmod: insmod-frontend.o insmod.o ./util/libutil-STANDALONE.a ./obj/libobj.a
-	gcc -o $@ $^
-	$(STRIPCMD) $@
-
-t/.create_stuff: util/libutil.a obj/libobj.a
-	rm -rf t
-	mkdir t
-	cd t &&	for e in $^; do ar -x ../$$e; done
-	touch t/.create_stuff
-
-libinsmod.a: insmod.o t/.create_stuff
-	ar cru $@ insmod.o t/*
-	ranlib $@
-
-libinsmod-DIET.a: insmod-DIET.o ./util/libutil-DIET.a ./obj/libobj-DIET.a
-	ar cru $@ $^
-	ranlib $@
-
-insmod-frontend.o: insmod-frontend.c insmod.c
-	gcc $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -c insmod-frontend.c
-
-insmod.o: insmod.c
-	gcc $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -c insmod.c
-
-insmod-DIET.o: insmod.c
-	gcc $(CFLAGS) $(DEFS) $(INCS) $(DIETLIBC_INCLUDES) -o $@ -c insmod.c
-
diff --git a/mdk-stage1/insmod-modutils/include/config.h b/mdk-stage1/insmod-modutils/include/config.h
deleted file mode 100644
index 11da6a523..000000000
--- a/mdk-stage1/insmod-modutils/include/config.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Configuration file management
- *
- * Copyright 1994, 1995, 1996, 1997:
- *	Jacques Gelinas <jack@solucorp.qc.ca>
- *	Bj�rn Ekwall <bj0rn@blox.se> February, March 1999
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef _CONFIG_H
-#define _CONFIG_H
-
-#include <stdio.h>
-#include <sys/utsname.h>
-
-#define ETC_MODULES_CONF	"/etc/modules.conf"
-
-#define EXEC_PRE_INSTALL 0
-#define EXEC_POST_INSTALL 1
-#define EXEC_PRE_REMOVE 2
-#define EXEC_POST_REMOVE 3
-#define EXEC_INSTALL 4
-#define EXEC_REMOVE 5
-
-struct PATH_TYPE {
-	char *type;
-	char *path;
-};
-
-struct EXEC_TYPE {
-	int when;
-	char *module;
-	char *cmd;
-};
-
-typedef struct {
-	char *name;
-	GLOB_LIST *opts;
-	int autoclean;
-} OPT_LIST;
-
-/* config.c */
-extern int flag_autoclean;
-extern struct utsname uts_info;
-extern char *aliaslist[];
-extern struct PATH_TYPE *modpath;
-extern int nmodpath;
-extern struct EXEC_TYPE *execs;
-extern int nexecs;
-extern char *insmod_opt;
-extern char *config_file;
-extern char *optlist[];
-extern char *prune[];
-extern OPT_LIST *opt_list;
-extern OPT_LIST *abovelist;
-extern OPT_LIST *belowlist;
-extern OPT_LIST *prunelist;
-extern OPT_LIST *probe_list;
-extern OPT_LIST *probeall_list;
-extern OPT_LIST *aliases;
-extern time_t config_mtime;
-extern int root_check_off;	/* Check modules are owned by root? */
-
-/* Information about generated files */
-struct gen_files {
-	char *base;		/* xxx in /lib/modules/`uname -r`/modules.xxx */
-	char *name;             /* name actually used */
-	time_t mtime;
-};
-
-extern struct gen_files gen_file[];
-extern const int gen_file_count;
-/* The enum order must match the gen_file initialization order in config.c */
-enum gen_file_enum {
-	GEN_GENERIC_STRINGFILE,
-	GEN_PCIMAPFILE,
-	GEN_ISAPNPMAPFILE,
-	GEN_USBMAPFILE,
-	GEN_PARPORTMAPFILE,
-	GEN_DEPFILE,
-};
-
-extern char *persistdir;
-
-char *fgets_strip(char *buf, int sizebuf, FILE * fin, int *lineno);
-int config_read(int all, char *force_ver, char *base_dir, char *conf_file);
-GLOB_LIST *config_lstmod(const char *match, const char *type, int first_only);
-char *search_module_path(const char *base);
-
-#endif /* _CONFIG_H */
diff --git a/mdk-stage1/insmod-modutils/include/elf_alpha.h b/mdk-stage1/insmod-modutils/include/elf_alpha.h
deleted file mode 100644
index f1ec66f1c..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_alpha.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Machine-specific elf macros for the Alpha.  */
-#ident "$Id$"
-
-#define ELFCLASSM	ELFCLASS64
-#define ELFDATAM	ELFDATA2LSB
-
-#define MATCH_MACHINE(x)  (x == EM_ALPHA)
-
-#define SHT_RELM	SHT_RELA
-#define Elf64_RelM	Elf64_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_arm.h b/mdk-stage1/insmod-modutils/include/elf_arm.h
deleted file mode 100644
index f6b531e88..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_arm.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Machine-specific elf macros for ARM.  */
-#ident "$Id$"
-
-#define ELFCLASSM	ELFCLASS32
-#define ELFDATAM	ELFDATA2LSB
-
-#define MATCH_MACHINE(x)  (x == EM_ARM)
-
-#define SHT_RELM	SHT_REL
-#define Elf32_RelM	Elf32_Rel
diff --git a/mdk-stage1/insmod-modutils/include/elf_hppa.h b/mdk-stage1/insmod-modutils/include/elf_hppa.h
deleted file mode 100644
index 9a1bd34ce..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_hppa.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Machine-specific elf macros for HP-PA.  */
-
-#define ELFCLASSM	ELFCLASS32
-#define ELFDATAM	ELFDATA2MSB
-
-#define MATCH_MACHINE(x)  (x == EM_PARISC)
-
-#define SHT_RELM	SHT_RELA
-#define Elf32_RelM	Elf32_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_hppa64.h b/mdk-stage1/insmod-modutils/include/elf_hppa64.h
deleted file mode 100644
index 05b201aef..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_hppa64.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Machine-specific elf macros for HP-PA64.  */
-
-#define ELFCLASSM	ELFCLASS64
-#define ELFDATAM	ELFDATA2MSB
-
-#define MATCH_MACHINE(x)  (x == EM_PARISC)
-
-#define SHT_RELM	SHT_RELA
-#define Elf64_RelM	Elf64_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_i386.h b/mdk-stage1/insmod-modutils/include/elf_i386.h
deleted file mode 100644
index c6c2d326e..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_i386.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Machine-specific elf macros for i386 et al.  */
-#ident "$Id$"
-
-#define ELFCLASSM	ELFCLASS32
-#define ELFDATAM	ELFDATA2LSB
-
-#define MATCH_MACHINE(x)  (x == EM_386)
-
-#define SHT_RELM	SHT_REL
-#define Elf32_RelM	Elf32_Rel
diff --git a/mdk-stage1/insmod-modutils/include/elf_ia64.h b/mdk-stage1/insmod-modutils/include/elf_ia64.h
deleted file mode 100644
index b4d902956..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_ia64.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Machine-specific elf macros for ia64.  */
-
-#define ELFCLASSM	ELFCLASS64
-#define ELFDATAM	ELFDATA2LSB
-
-#define MATCH_MACHINE(x)  (x == EM_IA_64)
-
-#define SHT_RELM	SHT_RELA
-#define Elf64_RelM	Elf64_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_m68k.h b/mdk-stage1/insmod-modutils/include/elf_m68k.h
deleted file mode 100644
index 817fc8f2c..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_m68k.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Machine-specific elf macros for m68k.  */
-#ident "$Id$"
-
-#define ELFCLASSM	ELFCLASS32
-#define ELFDATAM	ELFDATA2MSB
-
-#define MATCH_MACHINE(x)  (x == EM_68K)
-
-#define SHT_RELM	SHT_RELA
-#define Elf32_RelM	Elf32_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_mips.h b/mdk-stage1/insmod-modutils/include/elf_mips.h
deleted file mode 100644
index 8a0430216..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_mips.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Machine-specific elf macros for MIPS.  */
-#ident "$Id$"
-
-#define ELFCLASSM	ELFCLASS32
-#ifdef __MIPSEB__
-#define ELFDATAM	ELFDATA2MSB
-#endif
-#ifdef __MIPSEL__
-#define ELFDATAM	ELFDATA2LSB
-#endif
-
-/* Account for ELF spec changes.  */
-#ifndef EM_MIPS_RS3_LE
-#ifdef EM_MIPS_RS4_BE
-#define EM_MIPS_RS3_LE	EM_MIPS_RS4_BE
-#else
-#define EM_MIPS_RS3_LE	10
-#endif
-#endif /* !EM_MIPS_RS3_LE */
-
-#define MATCH_MACHINE(x)  (x == EM_MIPS || x == EM_MIPS_RS3_LE)
-
-#define SHT_RELM	SHT_REL
-#define Elf32_RelM	Elf32_Rel
diff --git a/mdk-stage1/insmod-modutils/include/elf_ppc.h b/mdk-stage1/insmod-modutils/include/elf_ppc.h
deleted file mode 100644
index 71596de8c..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_ppc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Machine-specific elf macros for the PowerPC.  */
-#ident "$Id$"
-
-#define ELFCLASSM	ELFCLASS32
-#define ELFDATAM	ELFDATA2MSB
-
-#define MATCH_MACHINE(x)  (x == EM_PPC)
-
-#define SHT_RELM	SHT_RELA
-#define Elf32_RelM	Elf32_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_s390.h b/mdk-stage1/insmod-modutils/include/elf_s390.h
deleted file mode 100644
index 547d66b83..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_s390.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Machine-specific elf macros for i386 et al.  */
-#ident "$Id$"
-
-#define ELFCLASSM	ELFCLASS32
-#define ELFDATAM	ELFDATA2MSB
-
-#define MATCH_MACHINE(x)  (x == EM_S390)
-
-#define SHT_RELM	SHT_RELA
-#define Elf32_RelM	Elf32_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_sparc.h b/mdk-stage1/insmod-modutils/include/elf_sparc.h
deleted file mode 100644
index 9b5c348d9..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_sparc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Machine-specific elf macros for the Sparc.  */
-#ident "$Id$"
-
-#define ELFCLASSM	ELFCLASS32
-#define ELFDATAM	ELFDATA2MSB
-
-#define MATCH_MACHINE(x)  (x == EM_SPARC)
-
-#define SHT_RELM	SHT_RELA
-#define Elf32_RelM	Elf32_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_sparc64.h b/mdk-stage1/insmod-modutils/include/elf_sparc64.h
deleted file mode 100644
index 158edd7e1..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_sparc64.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Machine-specific elf macros for the Sparc.  */
-#ident "$Id$"
-
-#define ELFCLASSM	ELFCLASS64
-#define ELFDATAM	ELFDATA2MSB
-
-#ifndef EM_SPARCV9
-#define EM_SPARCV9 43
-#endif
-#ifndef EM_SPARC64
-#define EM_SPARC64 11
-#endif
-#define MATCH_MACHINE(x)  ((x) == EM_SPARCV9 || (x) == EM_SPARC64)
-
-#define SHT_RELM	SHT_RELA
-#define Elf64_RelM	Elf64_Rela
-
-#ifndef ELF64_R_SYM
-#define ELF64_R_SYM(x)	((x) >> 32)
-#define ELF64_R_TYPE(x)	((unsigned)(x))
-#endif
-
-#ifndef ELF64_ST_BIND
-#define ELF64_ST_BIND(x)	((x) >> 4)
-#define ELF64_ST_TYPE(x)	((x) & 0xf)
-#endif
-
diff --git a/mdk-stage1/insmod-modutils/include/kallsyms.h b/mdk-stage1/insmod-modutils/include/kallsyms.h
deleted file mode 100644
index 9748873cf..000000000
--- a/mdk-stage1/insmod-modutils/include/kallsyms.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* kallsyms headers
-   Copyright 2000 Keith Owens <kaos@ocs.com.au>
-
-   This file is part of the Linux modutils.  It is exported to kernel
-   space so debuggers can access the kallsyms data.
-
-   The kallsyms data contains all the non-stack symbols from a kernel
-   or a module.  The kernel symbols are held between __start___kallsyms
-   and __stop___kallsyms.  The symbols for a module are accessed via
-   the struct module chain which is based at module_list.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ident "$Id$"
-
-#ifndef MODUTILS_KALLSYMS_H
-#define MODUTILS_KALLSYMS_H 1
-
-/* Have to (re)define these ElfW entries here because external kallsyms
- * code does not have access to modutils/include/obj.h.  This code is
- * included from user spaces tools (modutils) and kernel, they need
- * different includes.
- */
-
-#ifndef ELFCLASS32
-#ifdef __KERNEL__
-#include <linux/elf.h>
-#else	/* __KERNEL__ */
-#include <elf.h>
-#endif	/* __KERNEL__ */
-#endif	/* ELFCLASS32 */
-
-#ifndef ELFCLASSM
-#define ELFCLASSM ELF_CLASS
-#endif
-
-#ifndef ElfW
-# if ELFCLASSM == ELFCLASS32
-#  define ElfW(x)  Elf32_ ## x
-#  define ELFW(x)  ELF32_ ## x
-# else
-#  define ElfW(x)  Elf64_ ## x
-#  define ELFW(x)  ELF64_ ## x
-# endif
-#endif
-
-/* Format of data in the kallsyms section.
- * Most of the fields are small numbers but the total size and all
- * offsets can be large so use the 32/64 bit types for these fields.
- *
- * Do not use sizeof() on these structures, modutils may be using extra
- * fields.  Instead use the size fields in the header to access the
- * other bits of data.
- */  
-
-struct kallsyms_header {
-	int		size;		/* Size of this header */
-	ElfW(Word)	total_size;	/* Total size of kallsyms data */
-	int		sections;	/* Number of section entries */
-	ElfW(Off)	section_off;	/* Offset to first section entry */
-	int		section_size;	/* Size of one section entry */
-	int		symbols;	/* Number of symbol entries */
-	ElfW(Off)	symbol_off;	/* Offset to first symbol entry */
-	int		symbol_size;	/* Size of one symbol entry */
-	ElfW(Off)	string_off;	/* Offset to first string */
-	ElfW(Addr)	start;		/* Start address of first section */
-	ElfW(Addr)	end;		/* End address of last section */
-};
-
-struct kallsyms_section {
-	ElfW(Addr)	start;		/* Start address of section */
-	ElfW(Word)	size;		/* Size of this section */
-	ElfW(Off)	name_off;	/* Offset to section name */
-	ElfW(Word)	flags;		/* Flags from section */
-};
-
-struct kallsyms_symbol {
-	ElfW(Off)	section_off;	/* Offset to section that owns this symbol */
-	ElfW(Addr)	symbol_addr;	/* Address of symbol */
-	ElfW(Off)	name_off;	/* Offset to symbol name */
-};
-
-#define KALLSYMS_SEC_NAME "__kallsyms"
-#define KALLSYMS_IDX 2			/* obj_kallsyms creates kallsyms as section 2 */
-
-#define kallsyms_next_sec(h,s) \
-	((s) = (struct kallsyms_section *)((char *)(s) + (h)->section_size))
-#define kallsyms_next_sym(h,s) \
-	((s) = (struct kallsyms_symbol *)((char *)(s) + (h)->symbol_size))
-
-int kallsyms_symbol_to_address(
-	const char       *name,			/* Name to lookup */
-	unsigned long    *token,		/* Which module to start with */
-	const char      **mod_name,		/* Set to module name or "kernel" */
-	unsigned long    *mod_start,		/* Set to start address of module */
-	unsigned long    *mod_end,		/* Set to end address of module */
-	const char      **sec_name,		/* Set to section name */
-	unsigned long    *sec_start,		/* Set to start address of section */
-	unsigned long    *sec_end,		/* Set to end address of section */
-	const char      **sym_name,		/* Set to full symbol name */
-	unsigned long    *sym_start,		/* Set to start address of symbol */
-	unsigned long    *sym_end		/* Set to end address of symbol */
-	);
-
-int kallsyms_address_to_symbol(
-	unsigned long     address,		/* Address to lookup */
-	const char      **mod_name,		/* Set to module name */
-	unsigned long    *mod_start,		/* Set to start address of module */
-	unsigned long    *mod_end,		/* Set to end address of module */
-	const char      **sec_name,		/* Set to section name */
-	unsigned long    *sec_start,		/* Set to start address of section */
-	unsigned long    *sec_end,		/* Set to end address of section */
-	const char      **sym_name,		/* Set to full symbol name */
-	unsigned long    *sym_start,		/* Set to start address of symbol */
-	unsigned long    *sym_end		/* Set to end address of symbol */
-	);
-
-#endif /* kallsyms.h */
diff --git a/mdk-stage1/insmod-modutils/include/kerneld.h b/mdk-stage1/insmod-modutils/include/kerneld.h
deleted file mode 100644
index 3bc2c9d42..000000000
--- a/mdk-stage1/insmod-modutils/include/kerneld.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* Definitions for the Linux kerneld SYSV IPC interface.
-   This file was part of the Linux kernel, and so is covered by the GPL.  */
-
-#ifndef MODUTILS_KERNELD_H
-#define MODUTILS_KERNELD_H
-
-#ident "$Id$"
-
-#define KERNELD_SYSTEM 1
-#define KERNELD_REQUEST_MODULE 2		/* "insmod" */
-#define KERNELD_RELEASE_MODULE 3		/* "rmmod" */
-#define KERNELD_DELAYED_RELEASE_MODULE 4	/* "rmmod" */
-#define KERNELD_CANCEL_RELEASE_MODULE 5		/* "rmmod" */
-#define KERNELD_REQUEST_ROUTE 6			/* net/ipv4/route.c */
-#define KERNELD_BLANKER 7			/* drivers/char/console.c */
-#define KERNELD_PNP 8				/* drivers/pnp/kerneld.c */
-#define KERNELD_ARP 256				/* net/ipv4/arp.c */
-
-#ifdef NEW_KERNELD_PROTOCOL
-# define OLDIPC_KERNELD 00040000	/* old kerneld message channel */
-# define IPC_KERNELD 00140000		/* new kerneld message channel */
-# define KDHDR (sizeof(long) + sizeof(short) + sizeof(short))
-# define NULL_KDHDR 0, 2, 0
-#else /* NEW_KERNELD_PROTOCOL */
-# define IPC_KERNELD 00040000
-# define KDHDR (sizeof(long))
-# define NULL_KDHDR 0
-#endif /* NEW_KERNELD_PROTOCOL */
-
-#define KERNELD_MAXCMD 0x7ffeffff
-#define KERNELD_MINSEQ 0x7fff0000 /* "commands" legal up to 0x7ffeffff */
-#define KERNELD_WAIT 0x80000000
-#define KERNELD_NOWAIT 0
-
-struct kerneld_msg
-  {
-    long mtype;
-    long id;
-#ifdef NEW_KERNELD_PROTOCOL
-    short version;
-    short pid;
-#endif /* NEW_KERNELD_PROTOCOL */
-    char text[1];
-  };
-
-#endif /* kerneld.h */
diff --git a/mdk-stage1/insmod-modutils/include/modstat.h b/mdk-stage1/insmod-modutils/include/modstat.h
deleted file mode 100644
index b8a58eeae..000000000
--- a/mdk-stage1/insmod-modutils/include/modstat.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * For kernel module status and information
- *
- * Add module_name_list and l_module_name_list.
- *   Keith Owens <kaos@ocs.com.au> November 1999.
- * Bj�rn Ekwall <bj0rn@blox.se> February 1999.
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-#ifndef _KERNEL_H
-#define _KERNEL_H
-
-#define K_SYMBOLS 1 /* Want info about symbols */
-#define K_INFO 2 /* Want extended module info */
-#define K_REFS 4 /* Want info about references */
-
-struct module_stat {
-	char *name;
-	unsigned long addr;
-	unsigned long modstruct; /* COMPAT_2_0! *//* depends on architecture? */
-	unsigned long size;
-	unsigned long flags;
-	long usecount;
-	size_t nsyms;
-	struct module_symbol *syms;
-	size_t nrefs;
-	struct module_stat **refs;
-	unsigned long status;
-};
-
-extern struct module_stat *module_stat;
-extern size_t n_module_stat;
-extern char *module_name_list;
-extern size_t l_module_name_list;
-extern struct module_symbol *ksyms;
-extern size_t nksyms;
-extern int k_new_syscalls;
-
-int get_kernel_info(int type);
-
-#endif /* _KERNEL_H */
diff --git a/mdk-stage1/insmod-modutils/include/module.h b/mdk-stage1/insmod-modutils/include/module.h
deleted file mode 100644
index db49ab2b2..000000000
--- a/mdk-stage1/insmod-modutils/include/module.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/* Definitions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-
-#ifndef MODUTILS_MODULE_H
-#define MODUTILS_MODULE_H 1
-
-#ident "$Id$"
-
-/* This file contains the structures used by the 2.0 and 2.1 kernels.
-   We do not use the kernel headers directly because we do not wish
-   to be dependant on a particular kernel version to compile insmod.  */
-
-
-/*======================================================================*/
-/* The structures used by Linux 2.0.  */
-
-/* The symbol format used by get_kernel_syms(2).  */
-struct old_kernel_sym
-{
-  unsigned long value;
-  char name[60];
-};
-
-struct old_module_ref
-{
-  unsigned long module;		/* kernel addresses */
-  unsigned long next;
-};
-
-struct old_module_symbol
-{
-  unsigned long addr;
-  unsigned long name;
-};
-
-struct old_symbol_table
-{
-  int size;			/* total, including string table!!! */
-  int n_symbols;
-  int n_refs;
-  struct old_module_symbol symbol[0]; /* actual size defined by n_symbols */
-  struct old_module_ref ref[0];	/* actual size defined by n_refs */
-};
-
-struct old_mod_routines
-{
-  unsigned long init;
-  unsigned long cleanup;
-};
-
-struct old_module
-{
-  unsigned long next;
-  unsigned long ref;		/* the list of modules that refer to me */
-  unsigned long symtab;
-  unsigned long name;
-  int size;			/* size of module in pages */
-  unsigned long addr;		/* address of module */
-  int state;
-  unsigned long cleanup;	/* cleanup routine */
-};
-
-/* Sent to init_module(2) or'ed into the code size parameter.  */
-#define OLD_MOD_AUTOCLEAN 0x40000000 /* big enough, but no sign problems... */
-
-int get_kernel_syms(struct old_kernel_sym *);
-int old_sys_init_module(const char *name, char *code, unsigned codesize,
-			struct old_mod_routines *, struct old_symbol_table *);
-
-/*======================================================================*/
-/* For sizeof() which are related to the module platform and not to the
-   environment isnmod is running in, use sizeof_xx instead of sizeof(xx).  */
-
-#define tgt_sizeof_char		sizeof(char)
-#define tgt_sizeof_short	sizeof(short)
-#define tgt_sizeof_int		sizeof(int)
-#define tgt_sizeof_long		sizeof(long)
-#define tgt_sizeof_char_p	sizeof(char *)
-#define tgt_sizeof_void_p	sizeof(void *)
-#define tgt_long		long
-#define tgt_long_fmt		"l"
-
-/* This assumes that long long on a 32 bit system is equivalent to long on the
- * equivalent 64 bit system.  Also that void and char pointers are 8 bytes on
- * all 64 bit systems.  Add per system tweaks if it ever becomes necessary.
- */
-#if defined(COMMON_3264) && defined(ONLY_64)
-#undef tgt_long
-#undef tgt_long_fmt
-#undef tgt_sizeof_long
-#undef tgt_sizeof_char_p
-#undef tgt_sizeof_void_p
-#define tgt_long                long long
-#define tgt_long_fmt		"ll"
-#define tgt_sizeof_long         8
-#define tgt_sizeof_char_p       8
-#define tgt_sizeof_void_p       8
-#endif
-
-/*======================================================================*/
-/* The structures used in Linux 2.1 onwards.  */
-
-/* Note: module_symbol does not use tgt_long intentionally */
-struct module_symbol
-{
-  unsigned long value;
-  unsigned long name;
-};
-
-struct module_ref
-{
-  unsigned tgt_long dep;		/* kernel addresses */
-  unsigned tgt_long ref;
-  unsigned tgt_long next_ref;
-};
-
-struct module
-{
-  unsigned tgt_long size_of_struct;	/* == sizeof(module) */
-  unsigned tgt_long next;
-  unsigned tgt_long name;
-  unsigned tgt_long size;
-
-  tgt_long usecount;
-  unsigned tgt_long flags;		/* AUTOCLEAN et al */
-
-  unsigned nsyms;
-  unsigned ndeps;
-
-  unsigned tgt_long syms;
-  unsigned tgt_long deps;
-  unsigned tgt_long refs;
-  unsigned tgt_long init;
-  unsigned tgt_long cleanup;
-  unsigned tgt_long ex_table_start;
-  unsigned tgt_long ex_table_end;
-#ifdef __alpha__
-  unsigned tgt_long gp;
-#endif
-  /* Everything after here is extension.  */
-  unsigned tgt_long read_start;		/* Read data from existing module */
-  unsigned tgt_long read_end;
-  unsigned tgt_long can_unload;
-  unsigned tgt_long runsize;
-  unsigned tgt_long kallsyms_start;
-  unsigned tgt_long kallsyms_end;
-  unsigned tgt_long archdata_start;
-  unsigned tgt_long archdata_end;
-  unsigned tgt_long kernel_data;
-};
-
-struct module_info
-{
-  unsigned long addr;
-  unsigned long size;
-  unsigned long flags;
-	   long usecount;
-};
-
-/* Bits of module.flags.  */
-#define NEW_MOD_RUNNING		1
-#define NEW_MOD_DELETED		2
-#define NEW_MOD_AUTOCLEAN	4
-#define NEW_MOD_VISITED		8
-#define NEW_MOD_USED_ONCE	16
-#define NEW_MOD_INITIALIZING	64
-
-int sys_init_module(const char *name, const struct module *);
-int query_module(const char *name, int which, void *buf, size_t bufsize,
-		 size_t *ret);
-
-/* Values for query_module's which.  */
-
-#define QM_MODULES	1
-#define QM_DEPS		2
-#define QM_REFS		3
-#define QM_SYMBOLS	4
-#define QM_INFO		5
-
-/*======================================================================*/
-/* The system calls unchanged between 2.0 and 2.1.  */
-
-unsigned long create_module(const char *, size_t);
-int delete_module(const char *);
-
-/* In safe mode the last parameter is forced to be a module name and meta
- * expansion is not allowed on that name.
- */
-extern unsigned int safemode;
-
-#endif /* module.h */
diff --git a/mdk-stage1/insmod-modutils/include/obj.h b/mdk-stage1/insmod-modutils/include/obj.h
deleted file mode 100644
index b140c65c3..000000000
--- a/mdk-stage1/insmod-modutils/include/obj.h
+++ /dev/null
@@ -1,275 +0,0 @@
-/* Elf object file loading and relocation routines.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-   obj_free() added by Bj�rn Ekwall <bj0rn@blox.se> March 1999
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-
-#ifndef MODUTILS_OBJ_H
-#define MODUTILS_OBJ_H 1
-
-#ident "$Id$"
-
-/* The relocatable object is manipulated using elfin types.  */
-
-#include <stdio.h>
-#include <elf.h>
-#include ELF_MACHINE_H
-
-#ifndef ElfW
-# if ELFCLASSM == ELFCLASS32
-#  define ElfW(x)  Elf32_ ## x
-#  define ELFW(x)  ELF32_ ## x
-# else
-#  define ElfW(x)  Elf64_ ## x
-#  define ELFW(x)  ELF64_ ## x
-# endif
-#endif
-
-#if defined(COMMON_3264) && defined(ONLY_32)
-#  define ObjW(x)  obj32_ ## x
-#else
-#  if defined(COMMON_3264) && defined(ONLY_64)
-#    define ObjW(x)  obj64_ ## x
-#  else
-#    define ObjW(x)    obj_ ## x
-#  endif
-#endif
-
-/* For some reason this is missing from lib5.  */
-#ifndef ELF32_ST_INFO
-# define ELF32_ST_INFO(bind, type)       (((bind) << 4) + ((type) & 0xf))
-#endif
-
-#ifndef ELF64_ST_INFO
-# define ELF64_ST_INFO(bind, type)       (((bind) << 4) + ((type) & 0xf))
-#endif
-
-struct obj_string_patch_struct;
-struct obj_symbol_patch_struct;
-
-struct obj_section
-{
-  ElfW(Shdr) header;
-  const char *name;
-  char *contents;
-  struct obj_section *load_next;
-  int idx;
-};
-
-struct obj_symbol
-{
-  struct obj_symbol *next;	/* hash table link */
-  const char *name;
-  unsigned long value;
-  unsigned long size;
-  int secidx;			/* the defining section index/module */
-  int info;
-  int ksymidx;			/* for export to the kernel symtab */
-  int r_type;			/* relocation type */
-};
-
-/* Hardcode the hash table size.  We shouldn't be needing so many
-   symbols that we begin to degrade performance, and we get a big win
-   by giving the compiler a constant divisor.  */
-
-#define HASH_BUCKETS  521
-
-struct obj_file
-{
-  ElfW(Ehdr) header;
-  ElfW(Addr) baseaddr;
-  struct obj_section **sections;
-  struct obj_section *load_order;
-  struct obj_section **load_order_search_start;
-  struct obj_string_patch_struct *string_patches;
-  struct obj_symbol_patch_struct *symbol_patches;
-  int (*symbol_cmp)(const char *, const char *);
-  unsigned long (*symbol_hash)(const char *);
-  unsigned long local_symtab_size;
-  struct obj_symbol **local_symtab;
-  struct obj_symbol *symtab[HASH_BUCKETS];
-  const char *filename;
-  char *persist;
-};
-
-enum obj_reloc
-{
-  obj_reloc_ok,
-  obj_reloc_overflow,
-  obj_reloc_dangerous,
-  obj_reloc_unhandled,
-  obj_reloc_constant_gp
-};
-
-struct obj_string_patch_struct
-{
-  struct obj_string_patch_struct *next;
-  int reloc_secidx;
-  ElfW(Addr) reloc_offset;
-  ElfW(Addr) string_offset;
-};
-
-struct obj_symbol_patch_struct
-{
-  struct obj_symbol_patch_struct *next;
-  int reloc_secidx;
-  ElfW(Addr) reloc_offset;
-  struct obj_symbol *sym;
-};
-
-
-/* Generic object manipulation routines.  */
-
-#define obj_elf_hash			ObjW(elf_hash)
-#define obj_elf_hash_n			ObjW(elf_hash_n)
-#define obj_add_symbol			ObjW(add_symbol)
-#define obj_find_symbol			ObjW(find_symbol)
-#define obj_symbol_final_value		ObjW(symbol_final_value)
-#define obj_set_symbol_compare		ObjW(set_symbol_compare)
-#define obj_find_section		ObjW(find_section)
-#define obj_insert_section_load_order	ObjW(insert_section_load_order)
-#define obj_create_alloced_section	ObjW(create_alloced_section)
-#define obj_create_alloced_section_first \
-					ObjW(create_alloced_section_first)
-#define obj_extend_section		ObjW(extend_section)
-#define obj_string_patch		ObjW(string_patch)
-#define obj_symbol_patch		ObjW(symbol_patch)
-#define obj_check_undefineds		ObjW(check_undefineds)
-#define obj_clear_undefineds		ObjW(clear_undefineds)
-#define obj_allocate_commons		ObjW(allocate_commons)
-#define obj_load_size			ObjW(load_size)
-#define obj_relocate			ObjW(relocate)
-#define obj_load			ObjW(load)
-#define obj_free			ObjW(free)
-#define obj_create_image		ObjW(create_image)
-#define obj_addr_to_native_ptr		ObjW(addr_to_native_ptr)
-#define obj_native_ptr_to_addr		ObjW(native_ptr_to_addr)
-#define arch_new_file			ObjW(arch_new_file)
-#define arch_new_section		ObjW(arch_new_section)
-#define arch_new_symbol			ObjW(arch_new_symbol)
-#define arch_apply_relocation		ObjW(arch_apply_relocation)
-#define arch_create_got			ObjW(arch_create_got)
-#define arch_init_module		ObjW(arch_init_module)
-#define arch_load_proc_section		ObjW(arch_load_proc_section)
-#define arch_finalize_section_address	ObjW(arch_finalize_section_address)
-#define arch_archdata			ObjW(arch_archdata)
-
-unsigned long obj_elf_hash (const char *);
-
-unsigned long obj_elf_hash_n (const char *, unsigned long len);
-
-struct obj_symbol *obj_add_symbol (struct obj_file *f, const char *name,
-				   unsigned long symidx, int info, int secidx,
-				   ElfW(Addr) value, unsigned long size);
-
-struct obj_symbol *obj_find_symbol (struct obj_file *f,
-					 const char *name);
-
-ElfW(Addr) obj_symbol_final_value (struct obj_file *f,
-				  struct obj_symbol *sym);
-
-void obj_set_symbol_compare (struct obj_file *f,
-			    int (*cmp)(const char *, const char *),
-			    unsigned long (*hash)(const char *));
-
-struct obj_section *obj_find_section (struct obj_file *f,
-					   const char *name);
-
-void obj_insert_section_load_order (struct obj_file *f,
-				    struct obj_section *sec);
-
-struct obj_section *obj_create_alloced_section (struct obj_file *f,
-						const char *name,
-						unsigned long align,
-						unsigned long size);
-
-struct obj_section *obj_create_alloced_section_first (struct obj_file *f,
-						      const char *name,
-						      unsigned long align,
-						      unsigned long size);
-
-void *obj_extend_section (struct obj_section *sec, unsigned long more);
-
-int obj_string_patch (struct obj_file *f, int secidx, ElfW(Addr) offset,
-		     const char *string);
-
-int obj_symbol_patch (struct obj_file *f, int secidx, ElfW(Addr) offset,
-		     struct obj_symbol *sym);
-
-int obj_check_undefineds (struct obj_file *f, int quiet);
-
-void obj_clear_undefineds (struct obj_file *f);
-
-void obj_allocate_commons (struct obj_file *f);
-
-unsigned long obj_load_size (struct obj_file *f);
-
-int obj_relocate (struct obj_file *f, ElfW(Addr) base);
-
-struct obj_file *obj_load (int f, Elf32_Half e_type, const char *filename);
-
-void obj_free (struct obj_file *f);
-
-int obj_create_image (struct obj_file *f, char *image);
-
-int obj_kallsyms (struct obj_file *fin, struct obj_file **fout);
-
-/* Architecture specific manipulation routines.  */
-
-struct obj_file *arch_new_file (void);
-
-struct obj_section *arch_new_section (void);
-
-struct obj_symbol *arch_new_symbol (void);
-
-enum obj_reloc arch_apply_relocation (struct obj_file *f,
-				      struct obj_section *targsec,
-				      struct obj_section *symsec,
-				      struct obj_symbol *sym,
-				      ElfW(RelM) *rel, ElfW(Addr) value);
-
-int arch_create_got (struct obj_file *f);
-
-struct module;
-int arch_init_module (struct obj_file *f, struct module *);
-
-int arch_load_proc_section (struct obj_section *sec, int fp);
-
-int arch_finalize_section_address (struct obj_file *f, ElfW(Addr) base);
-
-int arch_archdata (struct obj_file *fin, struct obj_section *sec);
-
-#define ARCHDATA_SEC_NAME "__archdata"
-
-/* Pointers in objects can be 32 or 64 bit */
-union obj_ptr_4 {
-	Elf32_Word addr;
-	void *ptr;
-};
-union obj_ptr_8 {
-	Elf64_Xword addr;
-	void *ptr;
-};
-
-void *obj_addr_to_native_ptr(ElfW(Addr));
-
-ElfW(Addr) obj_native_ptr_to_addr(void *);
-
-#endif /* obj.h */
diff --git a/mdk-stage1/insmod-modutils/include/util.h b/mdk-stage1/insmod-modutils/include/util.h
deleted file mode 100644
index b2e4a67c3..000000000
--- a/mdk-stage1/insmod-modutils/include/util.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* Miscelaneous utility functions.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-
-#ifndef MODUTILS_UTIL_H
-#define MODUTILS_UTIL_H 1
-
-#ident "$Id$"
-
-#include <stdio.h>
-#include <sys/stat.h>
-
-#define SHELL_META "&();|<>$`\"'\\!{}[]~=+:?*" /* Sum of bj0rn and Debian */
-
-void *xmalloc(size_t);
-void *xrealloc(void *, size_t);
-char *xstrdup(const char *);
-char *xstrcat(char *, const char *, size_t);
-int   xsystem(const char *, char *const[]);
-int   arch64(void);
-
-typedef int (*xftw_func_t)(const char *, const struct stat *);
-extern int xftw(const char *directory, xftw_func_t);
-
-/* Error logging */
-extern int log;
-extern int errors;
-extern const char *error_file;
-
-extern int flag_verbose;
-extern void verbose(const char *ctl,...);
-
-void error(const char *fmt, ...)
-#ifdef __GNUC__
-  __attribute__((format(printf, 1, 2)))
-#endif
-  ;
-
-void lprintf(const char *fmt, ...)
-#ifdef __GNUC__
-  __attribute__((format(printf, 1, 2)))
-#endif
-  ;
-
-void setsyslog(const char *program);
-
-/*
- * Generic globlist <bj0rn@blox.se>
- */
-typedef struct {
-	int pathc;       /* Count of paths matched so far  */
-	char **pathv;    /* List of matched pathnames.  */
-} GLOB_LIST;
-int meta_expand(char *pt, GLOB_LIST *g, char *base_dir, char *version, int type);
-#define ME_BUILTIN_COMMAND	1
-#define ME_SHELL_COMMAND	2
-#define ME_GLOB			4
-#define ME_ALL			(ME_GLOB|ME_SHELL_COMMAND|ME_BUILTIN_COMMAND)
-
-extern void snap_shot(const char *module_name, int number);
-extern void snap_shot_log(const char *fmt,...);
-
-#ifdef CONFIG_USE_ZLIB
-int gzf_open(const char *name, int mode);
-int gzf_read(int fd, void *buf, size_t count);
-off_t gzf_lseek(int fd, off_t offset, int whence);
-void gzf_close(int fd);
-
-#else /* ! CONFIG_USE_ZLIB */
-
-#include <unistd.h>
-
-#define gzf_open	open
-#define gzf_read	read
-#define gzf_lseek	lseek
-#define gzf_close	close
-
-#endif /* CONFIG_USE_ZLIB */
-
-#define SYMPREFIX "__insmod_";
-extern const char symprefix[10];	/* Must be sizeof(SYMPREFIX), including nul */
-
-#endif /* util.h */
diff --git a/mdk-stage1/insmod-modutils/include/version.h b/mdk-stage1/insmod-modutils/include/version.h
deleted file mode 100644
index 51ca0eb29..000000000
--- a/mdk-stage1/insmod-modutils/include/version.h
+++ /dev/null
@@ -1 +0,0 @@
-#define MODUTILS_VERSION "2.4.2"
diff --git a/mdk-stage1/insmod-modutils/insmod-frontend.c b/mdk-stage1/insmod-modutils/insmod-frontend.c
deleted file mode 100644
index 2b3aa1acb..000000000
--- a/mdk-stage1/insmod-modutils/insmod-frontend.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdio.h>
-
-
-int insmod_main( int argc, char **argv);
-
-int main( int argc, char **argv)
-{
-	printf("Using insmod provided by modutils.\n");
-	return insmod_main(argc, argv);
-}
diff --git a/mdk-stage1/insmod-modutils/insmod.c b/mdk-stage1/insmod-modutils/insmod.c
deleted file mode 100644
index 359b28837..000000000
--- a/mdk-stage1/insmod-modutils/insmod.c
+++ /dev/null
@@ -1,1964 +0,0 @@
-/* Insert a module into a running kernel.
-   Copyright 1996, 1997 Linux International.
-
-   New implementation contributed by Richard Henderson <rth@tamu.edu>
-   Based on original work by Bjorn Ekwall <bj0rn@blox.se>
-   Restructured (and partly rewritten) by:
-	Bj�rn Ekwall <bj0rn@blox.se> February 1999
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-  */
-
-  /*
-     Fixes:
-
-     Adjust module size for mod_use_count in old_init_module:
-     B. James Phillippe <bryan@terran.org>
-
-     Merged modprobe + many fixes: Bj�rn Ekwall <bj0rn@blox.se> February 1999
-     SMP "friendliness" (and -P): Bill Zumach <zumach+@transarc.com>
-
-     Ksymoops support: Keith Owens <kaos@ocs.com.au> August 1999.
-
-     Add -r flag: Keith Owens <kaos@ocs.com.au> October 1999.
-
-     More flexible recognition of the way the utility was called.
-     Suggested by Stepan Kasal, implemented in a different way by Keith
-     Owens <kaos@ocs.com.au> December 1999.
-
-     Rationalize common code for 32/64 bit architectures.
-       Keith Owens <kaos@ocs.com.au> December 1999.
-     Add arch64().
-       Keith Owens <kaos@ocs.com.au> December 1999.
-     kallsyms support
-       Keith Owens <kaos@ocs.com.au> April 2000.
-     archdata support
-       Keith Owens <kaos@ocs.com.au> August 2000.
-     Add insmod -O, move print map before sys_init_module.
-       Keith Owens <kaos@ocs.com.au> October 2000.
-     Add insmod -S.
-       Keith Owens <kaos@ocs.com.au> November 2000.
-     Add persistent data support.
-       Keith Owens <kaos@ocs.com.au> November 2000.
-   */
-
-#ident "$Id$"
-
-#include "../insmod.h"
-#include <sys/types.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-//#include <alloca.h>  provided by stdlib
-#include <limits.h>
-#include <ctype.h>
-#include <errno.h>
-#include <stddef.h>
-#include <getopt.h>
-#include <sys/stat.h>
-#include <sys/file.h>
-
-#include "module.h"
-#include "obj.h"
-#include "kallsyms.h"
-#include "util.h"
-#include "version.h"
-
-#include "modstat.h"
-#include "config.h"
-
-#define STRVERSIONLEN	32
-
-/*======================================================================*/
-
-static int flag_force_load = 0;
-static int flag_silent_probe = 0;
-static int flag_export = 1;
-static int flag_load_map = 0;
-static int flag_ksymoops = 1;
-
-static int n_ext_modules_used;
-static int m_has_modinfo;
-
-extern int insmod_main(int argc, char **argv);
-extern int insmod_main_32(int argc, char **argv);
-extern int insmod_main_64(int argc, char **argv);
-extern int modprobe_main(int argc, char **argv);
-extern int rmmod_main(int argc, char **argv);
-extern int ksyms_main(int argc, char **argv);
-extern int lsmod_main(int argc, char **argv);
-extern int kallsyms_main(int argc, char **argv);
-
-/*======================================================================*/
-
-/* Get the kernel version in the canonical integer form.  */
-
-static int get_kernel_version(char str[STRVERSIONLEN])
-{
-	char *p, *q;
-	int a, b, c;
-
-	strncpy(str, uts_info.release, STRVERSIONLEN);
-	p = uts_info.release;
-
-	a = strtoul(p, &p, 10);
-	if (*p != '.')
-		return -1;
-	b = strtoul(p + 1, &p, 10);
-	if (*p != '.')
-		return -1;
-	c = strtoul(p + 1, &q, 10);
-	if (p + 1 == q)
-		return -1;
-
-	return a << 16 | b << 8 | c;
-}
-
-/* String comparison for non-co-versioned kernel and module.
- * prefix should be the same as used by genksyms for this kernel.
- */
-static char *ncv_prefix = NULL;	/* Overridden by --prefix option */
-static int ncv_plen = 0;
-
-/* Only set prefix once. If set by the user, use it.  If not set by the
- * user, look for a well known kernel symbol and derive the prefix from
- * there.  Otherwise set the prefix depending on whether uts_info
- * includes SMP or not for backwards compatibility.
- */
-static void set_ncv_prefix(char *prefix)
-{
-	static char derived_prefix[256];
-	static const char *well_known_symbol[] = { "get_module_symbol_R",
-						   "inter_module_get_R",
-						 };
-	struct module_symbol *s;
-	int i, j, l, m, pl;
-	const char *name;
-	char *p;
-
-	if (ncv_prefix)
-		return;
-
-	if (prefix)
-		ncv_prefix = prefix;
-	else {
-		/* Extract the prefix (if any) from well known symbols */
-		for (i = 0, s = ksyms; i < nksyms; ++i, ++s) {
-			name = (char *) s->name;
-			l = strlen(name);
-			for (j = 0; j < sizeof(well_known_symbol)/sizeof(well_known_symbol[0]); ++j) {
-				m = strlen(well_known_symbol[j]);
-				if (m + 8 > l ||
-				    strncmp(name, well_known_symbol[j], m))
-					continue;
-				pl = l - m - 8;
-				if (pl > sizeof(derived_prefix)-1)
-					continue;	/* Prefix is wrong length */
-				/* Must end with 8 hex digits */
-				(void) strtoul(name+l-8, &p, 16);
-				if (*p == 0) {
-					strncpy(derived_prefix, name+m, pl);
-					*(derived_prefix+pl) = '\0';
-					ncv_prefix = derived_prefix;
-					break;
-				}
-			}
-		}
-	}
-	if (!ncv_prefix) {
-		p = strchr(uts_info.version, ' ');
-		if (p && *(++p) && !strncmp(p, "SMP ", 4))
-			ncv_prefix = "smp_";
-		else
-			ncv_prefix = "";
-	}
-	ncv_plen = strlen(ncv_prefix);
-	if (flag_verbose)
-		lprintf("Symbol version prefix '%s'", ncv_prefix);
-}
-
-static int ncv_strcmp(const char *a, const char *b)
-{
-	size_t alen = strlen(a), blen = strlen(b);
-
-	if (blen == alen + 10 + ncv_plen &&
-	    b[alen] == '_' &&
-	    b[alen + 1] == 'R' &&
-	    !(ncv_plen && strncmp(b + alen + 2, ncv_prefix, ncv_plen))) {
-		return strncmp(a, b, alen);
-	} else if (alen == blen + 10 + ncv_plen &&
-		   a[blen] == '_' && a[blen + 1] == 'R' &&
-		   !(ncv_plen && strncmp(a + blen + 2, ncv_prefix, ncv_plen))) {
-		return strncmp(a, b, blen);
-	} else
-		return strcmp(a, b);
-}
-
-/*
- * String hashing for non-co-versioned kernel and module.
- * Here we are simply forced to drop the crc from the hash.
- */
-static unsigned long ncv_symbol_hash(const char *str)
-{
-	size_t len = strlen(str);
-
-	if (len > 10 + ncv_plen &&
-	    str[len - 10 - ncv_plen] == '_' &&
-	    str[len - 9 - ncv_plen] == 'R' &&
-	    !(
-	      ncv_plen &&
-	      strncmp(str + len - (8 + ncv_plen), ncv_prefix, ncv_plen)
-	     ))
-		len -= 10 + ncv_plen;
-	return obj_elf_hash_n(str, len);
-}
-
-/*
- * Conditionally add the symbols from the given symbol set
- * to the new module.
- */
-static int add_symbols_from(struct obj_file *f, int idx,
-			    struct module_symbol *syms, size_t nsyms)
-{
-	struct module_symbol *s;
-	size_t i;
-	int used = 0;
-
-	for (i = 0, s = syms; i < nsyms; ++i, ++s) {
-		/*
-		 * Only add symbols that are already marked external.
-		 * If we override locals we may cause problems for
-		 * argument initialization.
-		 * We will also create a false dependency on the module.
-		 */
-		struct obj_symbol *sym;
-
-		sym = obj_find_symbol(f, (char *) s->name);
-		if (sym && !ELFW(ST_BIND) (sym->info) == STB_LOCAL) {
-			sym = obj_add_symbol(f, (char *) s->name, -1,
-				  ELFW(ST_INFO) (STB_GLOBAL, STT_NOTYPE),
-					     idx, s->value, 0);
-			/*
-			 * Did our symbol just get installed?
-			 * If so, mark the module as "used".
-			 */
-			if (sym->secidx == idx)
-				used = 1;
-		}
-	}
-
-	return used;
-}
-
-static void add_kernel_symbols(struct obj_file *f)
-{
-	struct module_stat *m;
-	size_t i, nused = 0;
-
-	/* Add module symbols first.  */
-	for (i = 0, m = module_stat; i < n_module_stat; ++i, ++m)
-		if (m->nsyms &&
-		    add_symbols_from(f, SHN_HIRESERVE + 2 + i, m->syms, m->nsyms))
-			m->status = 1 /* used */, ++nused;
-	n_ext_modules_used = nused;
-
-	/* And finally the symbols from the kernel proper.  */
-	if (nksyms)
-		add_symbols_from(f, SHN_HIRESERVE + 1, ksyms, nksyms);
-}
-
-static void hide_special_symbols(struct obj_file *f)
-{
-	struct obj_symbol *sym;
-	const char *const *p;
-	static const char *const specials[] =
-	{
-		"cleanup_module",
-		"init_module",
-		"kernel_version",
-		NULL
-	};
-
-	for (p = specials; *p; ++p)
-		if ((sym = obj_find_symbol(f, *p)) != NULL)
-			sym->info = ELFW(ST_INFO) (STB_LOCAL, ELFW(ST_TYPE) (sym->info));
-}
-
-static void print_load_map(struct obj_file *f)
-{
-	struct obj_symbol *sym;
-	struct obj_symbol **all, **p;
-	struct obj_section *sec;
-	int load_map_cmp(const void *a, const void *b) {
-		struct obj_symbol **as = (struct obj_symbol **) a;
-		struct obj_symbol **bs = (struct obj_symbol **) b;
-		unsigned long aa = obj_symbol_final_value(f, *as);
-		unsigned long ba = obj_symbol_final_value(f, *bs);
-		 return aa < ba ? -1 : aa > ba ? 1 : 0;
-	}
-	int i, nsyms, *loaded;
-
-	/* Report on the section layout.  */
-
-	lprintf("Sections:       Size      %-*s  Align",
-		(int) (2 * sizeof(void *)), "Address");
-
-	for (sec = f->load_order; sec; sec = sec->load_next) {
-		int a;
-		unsigned long tmp;
-
-		for (a = -1, tmp = sec->header.sh_addralign; tmp; ++a)
-			tmp >>= 1;
-		if (a == -1)
-			a = 0;
-
-		lprintf("%-16s%08lx  %0*lx  2**%d",
-			sec->name,
-			(long)sec->header.sh_size,
-			(int) (2 * sizeof(void *)),
-			(long)sec->header.sh_addr,
-			a);
-	}
-
-	/* Quick reference which section indicies are loaded.  */
-
-	loaded = alloca(sizeof(int) * (i = f->header.e_shnum));
-	while (--i >= 0)
-		loaded[i] = (f->sections[i]->header.sh_flags & SHF_ALLOC) != 0;
-
-	/* Collect the symbols we'll be listing.  */
-
-	for (nsyms = i = 0; i < HASH_BUCKETS; ++i)
-		for (sym = f->symtab[i]; sym; sym = sym->next)
-			if (sym->secidx <= SHN_HIRESERVE
-			    && (sym->secidx >= SHN_LORESERVE || loaded[sym->secidx]))
-				++nsyms;
-
-	all = alloca(nsyms * sizeof(struct obj_symbol *));
-
-	for (i = 0, p = all; i < HASH_BUCKETS; ++i)
-		for (sym = f->symtab[i]; sym; sym = sym->next)
-			if (sym->secidx <= SHN_HIRESERVE
-			    && (sym->secidx >= SHN_LORESERVE || loaded[sym->secidx]))
-				*p++ = sym;
-
-	/* Sort them by final value.  */
-	qsort(all, nsyms, sizeof(struct obj_file *), load_map_cmp);
-
-	/* And list them.  */
-	lprintf("\nSymbols:");
-	for (p = all; p < all + nsyms; ++p) {
-		char type = '?';
-		unsigned long value;
-
-		sym = *p;
-		if (sym->secidx == SHN_ABS) {
-			type = 'A';
-			value = sym->value;
-		} else if (sym->secidx == SHN_UNDEF) {
-			type = 'U';
-			value = 0;
-		} else {
-			struct obj_section *sec = f->sections[sym->secidx];
-
-			if (sec->header.sh_type == SHT_NOBITS)
-				type = 'B';
-			else if (sec->header.sh_flags & SHF_ALLOC) {
-				if (sec->header.sh_flags & SHF_EXECINSTR)
-					type = 'T';
-				else if (sec->header.sh_flags & SHF_WRITE)
-					type = 'D';
-				else
-					type = 'R';
-			}
-			value = sym->value + sec->header.sh_addr;
-		}
-
-		if (ELFW(ST_BIND) (sym->info) == STB_LOCAL)
-			type = tolower(type);
-
-		lprintf("%0*lx %c %s", (int) (2 * sizeof(void *)), value,
-			type, sym->name);
-	}
-}
-
-/************************************************************************/
-/* begin compat */
-
-static char * get_modinfo_value(struct obj_file *f, const char *key)
-{
-	struct obj_section *sec;
-	char *p, *v, *n, *ep;
-	size_t klen = strlen(key);
-
-	sec = obj_find_section(f, ".modinfo");
-	if (sec == NULL)
-		return NULL;
-
-	p = sec->contents;
-	ep = p + sec->header.sh_size;
-	while (p < ep) {
-		v = strchr(p, '=');
-		n = strchr(p, '\0');
-		if (v) {
-			if (v - p == klen && strncmp(p, key, klen) == 0)
-				return v + 1;
-		} else {
-			if (n - p == klen && strcmp(p, key) == 0)
-				return n;
-		}
-		p = n + 1;
-	}
-
-	return NULL;
-}
-
-static int create_this_module(struct obj_file *f, const char *m_name)
-{
-	struct obj_section *sec;
-
-	sec = obj_create_alloced_section_first(f, ".this", tgt_sizeof_long,
-					       sizeof(struct module));
-	memset(sec->contents, 0, sizeof(struct module));
-
-	obj_add_symbol(f, "__this_module", -1, ELFW(ST_INFO) (STB_LOCAL, STT_OBJECT),
-		       sec->idx, 0, sizeof(struct module));
-
-	obj_string_patch(f, sec->idx, offsetof(struct module, name), m_name);
-
-	return 1;
-}
-
-#ifdef COMPAT_2_0
-static int old_create_mod_use_count(struct obj_file *f)
-{
-	struct obj_section *sec;
-	struct obj_symbol  *got;
-
-	sec = obj_create_alloced_section_first(f, ".moduse",
-					       sizeof(long), sizeof(long));
-
-	obj_add_symbol(f, "mod_use_count_",
-		       -1, ELFW(ST_INFO)(STB_LOCAL, STT_OBJECT),
-		       sec->idx, 0, sizeof(long));
-
-	/*
-	 * patb: if there is a _GLOBAL_OFFSET_TABLE_,
-	 * add .got section for PIC type modules;
-	 * we have to do this here, because obj_* calls are not made until
-	 * after obj_check_undefined
-	 * is there a better place for this exception?
-	 */
-	got = obj_find_symbol(f, "_GLOBAL_OFFSET_TABLE_");
-	if (got)
-{
-		sec = obj_create_alloced_section(f, ".got",
-						 sizeof(long), sizeof(long));
-		got->secidx = sec->idx; /* mark the symbol as defined */
-	}
-	return 1;
-}
-#endif
-
-/* add an entry to the __ksymtab section, creating it if necessary */
-static void add_ksymtab(struct obj_file *f, struct obj_symbol *sym)
-{
-	struct obj_section *sec;
-	ElfW(Addr) ofs;
-
-	/* ensure __ksymtab is allocated, EXPORT_NOSYMBOLS creates a non-alloc section.
-	 * If __ksymtab is defined but not marked alloc, x out the first character
-	 * (no obj_delete routine) and create a new __ksymtab with the correct
-	 * characteristics.
-	 */
-	sec = obj_find_section(f, "__ksymtab");
-	if (sec && !(sec->header.sh_flags & SHF_ALLOC)) {
-		*((char *)(sec->name)) = 'x';	/* override const */
-		sec = NULL;
-	}
-	if (!sec)
-		sec = obj_create_alloced_section(f, "__ksymtab", tgt_sizeof_void_p, 0);
-	if (!sec)
-		return;
-	sec->header.sh_flags |= SHF_ALLOC;
-
-	ofs = sec->header.sh_size;
-	obj_symbol_patch(f, sec->idx, ofs, sym);
-	obj_string_patch(f, sec->idx, ofs + tgt_sizeof_void_p, sym->name);
-	obj_extend_section(sec, 2 * tgt_sizeof_char_p);
-}
-
-static int create_module_ksymtab(struct obj_file *f)
-{
-	struct obj_section *sec;
-	int i;
-
-	/* We must always add the module references.  */
-
-	if (n_ext_modules_used) {
-		struct module_ref *dep;
-		struct obj_symbol *tm;
-
-		sec = obj_create_alloced_section(f, ".kmodtab", tgt_sizeof_void_p,
-					   (sizeof(struct module_ref)
-					    * n_ext_modules_used));
-		if (!sec)
-			return 0;
-
-		tm = obj_find_symbol(f, "__this_module");
-		dep = (struct module_ref *) sec->contents;
-		for (i = 0; i < n_module_stat; ++i)
-			if (module_stat[i].status /* used */) {
-				dep->dep = module_stat[i].addr;
-				obj_symbol_patch(f, sec->idx, (char *) &dep->ref - sec->contents, tm);
-				dep->next_ref = 0;
-				++dep;
-			}
-	}
-	if (flag_export && !obj_find_section(f, "__ksymtab")) {
-		int *loaded;
-
-		/* We don't want to export symbols residing in sections that
-		   aren't loaded.  There are a number of these created so that
-		   we make sure certain module options don't appear twice.  */
-
-		loaded = alloca(sizeof(int) * (i = f->header.e_shnum));
-		while (--i >= 0)
-			loaded[i] = (f->sections[i]->header.sh_flags & SHF_ALLOC) != 0;
-
-		for (i = 0; i < HASH_BUCKETS; ++i) {
-			struct obj_symbol *sym;
-			for (sym = f->symtab[i]; sym; sym = sym->next) {
-				if (ELFW(ST_BIND) (sym->info) != STB_LOCAL
-				    && sym->secidx <= SHN_HIRESERVE
-				    && (sym->secidx >= SHN_LORESERVE
-					|| loaded[sym->secidx])) {
-					add_ksymtab(f, sym);
-				}
-			}
-		}
-	}
-	return 1;
-}
-
-/* Get the module's kernel version in the canonical integer form.  */
-static int get_module_version(struct obj_file *f, char str[STRVERSIONLEN])
-{
-	int a, b, c;
-	char *p, *q;
-
-	if ((p = get_modinfo_value(f, "kernel_version")) == NULL) {
-		struct obj_symbol *sym;
-
-		m_has_modinfo = 0;
-		if ((sym = obj_find_symbol(f, "kernel_version")) == NULL)
-			sym = obj_find_symbol(f, "__module_kernel_version");
-		if (sym == NULL)
-			return -1;
-		p = f->sections[sym->secidx]->contents + sym->value;
-	} else
-		m_has_modinfo = 1;
-
-	strncpy(str, p, STRVERSIONLEN);
-
-	a = strtoul(p, &p, 10);
-	if (*p != '.')
-		return -1;
-	b = strtoul(p + 1, &p, 10);
-	if (*p != '.')
-		return -1;
-	c = strtoul(p + 1, &q, 10);
-	if (p + 1 == q)
-		return -1;
-
-	return a << 16 | b << 8 | c;
-}
-
-/* Return the kernel symbol checksum version, or zero if not used. */
-static int is_kernel_checksummed(void)
-{
-	struct module_symbol *s;
-	size_t i;
-
-	/*
-	 * Using_Versions might not be the first symbol,
-	 * but it should be in there.
-	 */
-	for (i = 0, s = ksyms; i < nksyms; ++i, ++s)
-		if (strcmp((char *) s->name, "Using_Versions") == 0)
-			return s->value;
-
-	return 0;
-}
-
-static int is_module_checksummed(struct obj_file *f)
-{
-	if (m_has_modinfo) {
-		const char *p = get_modinfo_value(f, "using_checksums");
-		if (p)
-			return atoi(p);
-		else
-			return 0;
-	} else
-		return obj_find_symbol(f, "Using_Versions") != NULL;
-}
-
-/* add module source, timestamp, kernel version and a symbol for the
- * start of some sections.  this info is used by ksymoops to do better
- * debugging.
- */
-static void add_ksymoops_symbols(struct obj_file *f, const char *filename,
-				 const char *m_name)
-{
-	struct obj_section *sec;
-	struct obj_symbol *sym;
-	char *name, *absolute_filename;
-	char str[STRVERSIONLEN], real[PATH_MAX];
-	int i, l, lm_name, lfilename, use_ksymtab, version;
-	struct stat statbuf;
-
-	static const char *section_names[] = {
-		".text",
-		".rodata",
-		".data",
-		".bss"
-	};
-
-	if (realpath(filename, real)) {
-		absolute_filename = xstrdup(real);
-	}
-	else {
-		int save_errno = errno;
-		error("cannot get realpath for %s", filename);
-		errno = save_errno;
-		absolute_filename = xstrdup(filename);
-	}
-
-	lm_name = strlen(m_name);
-	lfilename = strlen(absolute_filename);
-
-	/* add to ksymtab if it already exists or there is no ksymtab and other symbols
-	 * are not to be exported.  otherwise leave ksymtab alone for now, the
-	 * "export all symbols" compatibility code will export these symbols later.
-	 */
-
-	use_ksymtab =  obj_find_section(f, "__ksymtab") || !flag_export;
-
-	if ((sec = obj_find_section(f, ".this"))) {
-		/* tag the module header with the object name, last modified
-		 * timestamp and module version.  worst case for module version
-		 * is 0xffffff, decimal 16777215.  putting all three fields in
-		 * one symbol is less readable but saves kernel space.
-		 */
-		l = sizeof(symprefix)+			/* "__insmod_" */
-		    lm_name+				/* module name */
-		    2+					/* "_O" */
-		    lfilename+				/* object filename */
-		    2+					/* "_M" */
-		    2*sizeof(statbuf.st_mtime)+		/* mtime in hex */
-		    2+					/* "_V" */
-		    8+					/* version in dec */
-		    1;					/* nul */
-		name = xmalloc(l);
-		if (stat(absolute_filename, &statbuf) != 0)
-			statbuf.st_mtime = 0;
-		version = get_module_version(f, str);	/* -1 if not found */
-		snprintf(name, l, "%s%s_O%s_M%0*lX_V%d",
-			 symprefix, m_name, absolute_filename,
-			 2*sizeof(statbuf.st_mtime), statbuf.st_mtime,
-			 version);
-		sym = obj_add_symbol(f, name, -1,
-				     ELFW(ST_INFO) (STB_GLOBAL, STT_NOTYPE),
-				     sec->idx, sec->header.sh_addr, 0);
-		if (use_ksymtab)
-			add_ksymtab(f, sym);
-	}
-	free(absolute_filename);
-
-	/* record where the persistent data is going, same address as previous symbol */
-
-	if (f->persist) {
-		l = sizeof(symprefix)+		/* "__insmod_" */
-			lm_name+		/* module name */
-			2+			/* "_P" */
-			strlen(f->persist)+	/* data store */
-			1;			/* nul */
-		name = xmalloc(l);
-		snprintf(name, l, "%s%s_P%s",
-			 symprefix, m_name, f->persist);
-		sym = obj_add_symbol(f, name, -1, ELFW(ST_INFO) (STB_GLOBAL, STT_NOTYPE),
-				     sec->idx, sec->header.sh_addr, 0);
-		if (use_ksymtab)
-			add_ksymtab(f, sym);
-	}
-
-	/* tag the desired sections if size is non-zero */
-
-	for (i = 0; i < sizeof(section_names)/sizeof(section_names[0]); ++i) {
-		if ((sec = obj_find_section(f, section_names[i])) &&
-		    sec->header.sh_size) {
-			l = sizeof(symprefix)+		/* "__insmod_" */
-				lm_name+		/* module name */
-				2+			/* "_S" */
-				strlen(sec->name)+	/* section name */
-				2+			/* "_L" */
-				8+			/* length in dec */
-				1;			/* nul */
-			name = xmalloc(l);
-			snprintf(name, l, "%s%s_S%s_L%ld",
-				 symprefix, m_name, sec->name,
-				 (long)sec->header.sh_size);
-			sym = obj_add_symbol(f, name, -1, ELFW(ST_INFO) (STB_GLOBAL, STT_NOTYPE),
-					     sec->idx, sec->header.sh_addr, 0);
-			if (use_ksymtab)
-				add_ksymtab(f, sym);
-		}
-	}
-}
-
-static int process_module_arguments(struct obj_file *f, int argc, char **argv, int required)
-{
-	for (; argc > 0; ++argv, --argc) {
-		struct obj_symbol *sym;
-		int c;
-		int min, max;
-		int n;
-		char *contents;
-		char *input;
-		char *fmt;
-		char *key;
-		char *loc;
-
-		if ((input = strchr(*argv, '=')) == NULL)
-			continue;
-
-		n = input - *argv;
-		input += 1; /* skip '=' */
-
-		key = alloca(n + 6);
-
-		if (m_has_modinfo) {
-			memcpy(key, "parm_", 5);
-			memcpy(key + 5, *argv, n);
-			key[n + 5] = '\0';
-			if ((fmt = get_modinfo_value(f, key)) == NULL) {
-				if (required) {
-					error("invalid parameter %s", key);
-					return 0;
-				}
-				else {
-					if (flag_verbose)
-						lprintf("ignoring %s", *argv);
-					continue;	/* silently ignore optional parameters */
-				}
-			}
-			key += 5;
-
-			if (isdigit(*fmt)) {
-				min = strtoul(fmt, &fmt, 10);
-				if (*fmt == '-')
-					max = strtoul(fmt + 1, &fmt, 10);
-				else
-					max = min;
-			} else
-				min = max = 1;
-		} else { /* not m_has_modinfo */
-			memcpy(key, *argv, n);
-			key[n] = '\0';
-
-			if (isdigit(*input))
-				fmt = "i";
-			else
-				fmt = "s";
-			min = max = 0;
-		}
-
-		sym = obj_find_symbol(f, key);
-
-		/*
-		 * Also check that the parameter was not
-		 * resolved from the kernel.
-		 */
-		if (sym == NULL || sym->secidx > SHN_HIRESERVE) {
-			error("symbol for parameter %s not found", key);
-			return 0;
-		}
-
-		contents = f->sections[sym->secidx]->contents;
-		loc = contents + sym->value;
-		n = 1;
-
-		while (*input) {
-			char *str;
-
-			switch (*fmt) {
-			case 's':
-			case 'c':
-				/*
-				 * Do C quoting if we begin with a ",
-				 * else slurp the lot.
-				 */
-				if (*input == '"') {
-					char *r;
-
-					str = alloca(strlen(input));
-					for (r = str, input++; *input != '"'; ++input, ++r) {
-						if (*input == '\0') {
-							error("improperly terminated string argument for %s", key);
-							return 0;
-						}
-						/* else */
-						if (*input != '\\') {
-							*r = *input;
-							continue;
-						}
-						/* else  handle \ */
-						switch (*++input) {
-						case 'a': *r = '\a'; break;
-						case 'b': *r = '\b'; break;
-						case 'e': *r = '\033'; break;
-						case 'f': *r = '\f'; break;
-						case 'n': *r = '\n'; break;
-						case 'r': *r = '\r'; break;
-						case 't': *r = '\t'; break;
-
-						case '0':
-						case '1':
-						case '2':
-						case '3':
-						case '4':
-						case '5':
-						case '6':
-						case '7':
-							c = *input - '0';
-							if ('0' <= input[1] && input[1] <= '7') {
-								c = (c * 8) + *++input - '0';
-								if ('0' <= input[1] && input[1] <= '7')
-									c = (c * 8) + *++input - '0';
-							}
-							*r = c;
-							break;
-
-						default: *r = *input; break;
-						}
-					}
-					*r = '\0';
-					++input;
-				} else {
-					/*
-					 * The string is not quoted.
-					 * We will break it using the comma
-					 * (like for ints).
-					 * If the user wants to include commas
-					 * in a string, he just has to quote it
-					 */
-					char *r;
-
-					/* Search the next comma */
-					if ((r = strchr(input, ',')) != NULL) {
-						/*
-						 * Found a comma
-						 * Recopy the current field
-						 */
-						str = alloca(r - input + 1);
-						memcpy(str, input, r - input);
-						str[r - input] = '\0';
-						/* Keep next fields */
-						input = r;
-					} else {
-						/* last string */
-						str = input;
-						input = "";
-					}
-				}
-
-				if (*fmt == 's') {
-					/* Normal string */
-					obj_string_patch(f, sym->secidx, loc - contents, str);
-					loc += tgt_sizeof_char_p;
-				} else {
-					/* Array of chars (in fact, matrix !) */
-					long charssize;	/* size of each member */
-
-					/* Get the size of each member */
-					/* Probably we should do that outside the loop ? */
-					if (!isdigit(*(fmt + 1))) {
-						error("parameter type 'c' for %s must be followed by"
-						" the maximum size", key);
-						return 0;
-					}
-					charssize = strtoul(fmt + 1, (char **) NULL, 10);
-
-					/* Check length */
-					if (strlen(str) >= charssize-1) {
-						error("string too long for %s (max %ld)",
-						      key, charssize - 1);
-						return 0;
-					}
-					/* Copy to location */
-					strcpy((char *) loc, str);	/* safe, see check above */
-					loc += charssize;
-				}
-				/*
-				 * End of 's' and 'c'
-				 */
-				break;
-
-			case 'b':
-				*loc++ = strtoul(input, &input, 0);
-				break;
-
-			case 'h':
-				*(short *) loc = strtoul(input, &input, 0);
-				loc += tgt_sizeof_short;
-				break;
-
-			case 'i':
-				*(int *) loc = strtoul(input, &input, 0);
-				loc += tgt_sizeof_int;
-				break;
-
-			case 'l':
-				*(long *) loc = strtoul(input, &input, 0);
-				loc += tgt_sizeof_long;
-				break;
-
-			default:
-				error("unknown parameter type '%c' for %s",
-				      *fmt, key);
-				return 0;
-			}
-			/*
-			 * end of switch (*fmt)
-			 */
-
-			while (*input && isspace(*input))
-				++input;
-			if (*input == '\0')
-				break; /* while (*input) */
-			/* else */
-
-			if (*input == ',') {
-				if (max && (++n > max)) {
-					error("too many values for %s (max %d)", key, max);
-					return 0;
-				}
-				++input;
-				/* continue with while (*input) */
-			} else {
-				error("invalid argument syntax for %s: '%c'",
-				      key, *input);
-				return 0;
-			}
-		} /* end of while (*input) */
-
-		if (min && (n < min)) {
-			error("too few values for %s (min %d)", key, min);
-			return 0;
-		}
-	} /* end of for (;argc > 0;) */
-
-	return 1;
-}
-
-
-/* Add a kallsyms section if the kernel supports all symbols. */
-static int add_kallsyms(struct obj_file *f,
-			struct obj_section **module_kallsyms, int force_kallsyms)
-{
-	struct module_symbol *s;
-	struct obj_file *f_kallsyms;
-	struct obj_section *sec_kallsyms;
-	size_t i;
-	int l;
-	const char *p, *pt_R;
-	unsigned long start = 0, stop = 0;
-
-	for (i = 0, s = ksyms; i < nksyms; ++i, ++s) {
-		p = (char *)s->name;
-		pt_R = strstr(p, "_R");
-		if (pt_R)
-			l = pt_R - p;
-		else
-			l = strlen(p);
-		if (strncmp(p, "__start_" KALLSYMS_SEC_NAME, l) == 0)
-			start = s->value;
-		else if (strncmp(p, "__stop_" KALLSYMS_SEC_NAME, l) == 0)
-			stop = s->value;
-	}
-
-	if (start >= stop && !force_kallsyms)
-		return(0);
-
-	/* The kernel contains all symbols, do the same for this module. */
-
-	/* Add an empty kallsyms section to the module if necessary */
-	for (i = 0; i < f->header.e_shnum; ++i) {
-		if (strcmp(f->sections[i]->name, KALLSYMS_SEC_NAME) == 0) {
-			*module_kallsyms = f->sections[i];
-			break;
-		}
-	    }
-	if (!*module_kallsyms)
-		*module_kallsyms = obj_create_alloced_section(f, KALLSYMS_SEC_NAME, 0, 0);
-
-	/* Size and populate kallsyms */
-	if (obj_kallsyms(f, &f_kallsyms))
-		return(1);
-	sec_kallsyms = f_kallsyms->sections[KALLSYMS_IDX];
-	(*module_kallsyms)->header.sh_addralign = sec_kallsyms->header.sh_addralign;
-	(*module_kallsyms)->header.sh_size = sec_kallsyms->header.sh_size;
-	free((*module_kallsyms)->contents);
-	(*module_kallsyms)->contents = sec_kallsyms->contents;
-	sec_kallsyms->contents = NULL;
-	obj_free(f_kallsyms);
-
-	return 0;
-}
-
-
-/* Add an arch data section if the arch wants it. */
-static int add_archdata(struct obj_file *f,
-			struct obj_section **sec)
-{
-	size_t i;
-
-	*sec = NULL;
-	/* Add an empty archdata section to the module if necessary */
-	for (i = 0; i < f->header.e_shnum; ++i) {
-		if (strcmp(f->sections[i]->name, ARCHDATA_SEC_NAME) == 0) {
-			*sec = f->sections[i];
-			break;
-		}
-	    }
-	if (!*sec)
-		*sec = obj_create_alloced_section(f, ARCHDATA_SEC_NAME, 16, 0);
-
-	/* Size and populate archdata */
-	if (arch_archdata(f, *sec))
-		return(1);
-	return 0;
-}
-
-
-static int init_module(const char *m_name, struct obj_file *f,
-		       unsigned long m_size, const char *blob_name,
-		       unsigned int noload, unsigned int flag_load_map)
-{
-	struct module *module;
-	struct obj_section *sec;
-	void *image;
-	int ret = 0;
-	tgt_long m_addr;
-
-	sec = obj_find_section(f, ".this");
-	module = (struct module *) sec->contents;
-	m_addr = sec->header.sh_addr;
-
-	module->size_of_struct = sizeof(*module);
-	module->size = m_size;
-	module->flags = flag_autoclean ? NEW_MOD_AUTOCLEAN : 0;
-
-	sec = obj_find_section(f, "__ksymtab");
-	if (sec && sec->header.sh_size) {
-		module->syms = sec->header.sh_addr;
-		module->nsyms = sec->header.sh_size / (2 * tgt_sizeof_char_p);
-	}
-	if (n_ext_modules_used) {
-		sec = obj_find_section(f, ".kmodtab");
-		module->deps = sec->header.sh_addr;
-		module->ndeps = n_ext_modules_used;
-	}
-	module->init = obj_symbol_final_value(f, obj_find_symbol(f, "init_module"));
-	module->cleanup = obj_symbol_final_value(f,
-		obj_find_symbol(f, "cleanup_module"));
-
-	sec = obj_find_section(f, "__ex_table");
-	if (sec) {
-		module->ex_table_start = sec->header.sh_addr;
-		module->ex_table_end = sec->header.sh_addr + sec->header.sh_size;
-	}
-	sec = obj_find_section(f, ".text.init");
-	if (sec) {
-		module->runsize = sec->header.sh_addr - m_addr;
-	}
-	sec = obj_find_section(f, ".data.init");
-	if (sec) {
-		if (!module->runsize ||
-		    module->runsize > sec->header.sh_addr - m_addr)
-			module->runsize = sec->header.sh_addr - m_addr;
-	}
-	sec = obj_find_section(f, ARCHDATA_SEC_NAME);
-	if (sec && sec->header.sh_size) {
-		module->archdata_start = sec->header.sh_addr;
-		module->archdata_end = module->archdata_start + sec->header.sh_size;
-	}
-	sec = obj_find_section(f, KALLSYMS_SEC_NAME);
-	if (sec && sec->header.sh_size) {
-		module->kallsyms_start = sec->header.sh_addr;
-		module->kallsyms_end = module->kallsyms_start + sec->header.sh_size;
-	}
-	if (!arch_init_module(f, module))
-		return 0;
-
-	/*
-	 * Whew!  All of the initialization is complete.
-	 * Collect the final module image and give it to the kernel.
-	 */
-	image = xmalloc(m_size);
-	obj_create_image(f, image);
-
-	if (flag_load_map)
-		print_load_map(f);
-
-	if (blob_name) {
-		int fd, l;
-		fd = open(blob_name, O_WRONLY|O_CREAT|O_TRUNC, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH);
-		if (fd < 0) {
-			error("open %s failed %m", blob_name);
-			ret = -1;
-		}
-		else {
-			if ((l = write(fd, image, m_size)) != m_size) {
-				error("write %s failed %m", blob_name);
-				ret = -1;
-			}
-			close(fd);
-		}
-	}
-
-	if (ret == 0 && !noload) {
-		fflush(stdout);		/* Flush any debugging output */
-		ret = sys_init_module(m_name, (struct module *) image);
-		if (ret) {
-			error("init_module: %m");
-			lprintf("Hint: insmod errors can be caused by incorrect module parameters, "
-				"including invalid IO or IRQ parameters");
-		}
-	}
-
-	free(image);
-
-	return ret == 0;
-}
-
-#ifdef COMPAT_2_0
-static int old_init_module(const char *m_name, struct obj_file *f,
-			   unsigned long m_size)
-{
-	char *image;
-	struct old_mod_routines routines;
-	struct old_symbol_table *symtab;
-	int ret;
-	int nsyms = 0, strsize = 0, total;
-
-	/* Create the symbol table */
-	/* Size things first... */
-	if (flag_export) {
-		int i;
-		for (i = 0; i < HASH_BUCKETS; ++i) {
-			struct obj_symbol *sym;
-
-			for (sym = f->symtab[i]; sym; sym = sym->next)
-				if (ELFW(ST_BIND) (sym->info) != STB_LOCAL &&
-				    sym->secidx <= SHN_HIRESERVE) {
-					sym->ksymidx = nsyms++;
-					strsize += strlen(sym->name) + 1;
-				}
-		}
-	}
-	total = (sizeof(struct old_symbol_table) +
-		 nsyms * sizeof(struct old_module_symbol) +
-		 n_ext_modules_used * sizeof(struct old_module_ref) +
-		 strsize);
-	symtab = xmalloc(total);
-	symtab->size = total;
-	symtab->n_symbols = nsyms;
-	symtab->n_refs = n_ext_modules_used;
-
-	if (flag_export && nsyms) {
-		struct old_module_symbol *ksym;
-		char *str;
-		int i;
-
-		ksym = symtab->symbol;
-		str = ((char *) ksym +
-		       nsyms * sizeof(struct old_module_symbol) +
-		       n_ext_modules_used * sizeof(struct old_module_ref));
-
-		for (i = 0; i < HASH_BUCKETS; ++i) {
-			struct obj_symbol *sym;
-			for (sym = f->symtab[i]; sym; sym = sym->next)
-				if (sym->ksymidx >= 0) {
-					ksym->addr = obj_symbol_final_value(f, sym);
-					ksym->name = (unsigned long) str - (unsigned long) symtab;
-
-					str = stpcpy(str, sym->name) + 1;
-					ksym++;
-				}
-		}
-	}
-
-	if (n_ext_modules_used) {
-		struct old_module_ref *ref;
-		int i;
-
-		ref = (struct old_module_ref *)
-		    ((char *) symtab->symbol + nsyms * sizeof(struct old_module_symbol));
-
-		for (i = 0; i < n_module_stat; ++i) {
-			if (module_stat[i].status /* used */) {
-				ref++->module = module_stat[i].modstruct;
-			}
-		}
-	}
-
-	/* Fill in routines.  */
-
-	routines.init = obj_symbol_final_value(f, obj_find_symbol(f, "init_module"));
-	routines.cleanup = obj_symbol_final_value(f,
-		obj_find_symbol(f, "cleanup_module"));
-
-	/*
-	 * Whew!  All of the initialization is complete.
-	 * Collect the final module image and give it to the kernel.
-	 */
-	image = xmalloc(m_size);
-	obj_create_image(f, image);
-
-	/*
-	 * image holds the complete relocated module,
-	 * accounting correctly for mod_use_count.
-	 * However the old module kernel support assume that it
-	 * is receiving something which does not contain mod_use_count.
-	 */
-	ret = old_sys_init_module(m_name, image + sizeof(long),
-				  (m_size - sizeof(long)) |
-				  (flag_autoclean ? OLD_MOD_AUTOCLEAN : 0),
-				  &routines,
-				  symtab);
-	if (ret)
-		error("init_module: %m");
-
-	free(image);
-	free(symtab);
-
-	return ret == 0;
-}
-#endif
-/* end compat */
-/************************************************************************/
-
-/* Check that a module parameter has a reasonable definition */
-static int check_module_parameter(struct obj_file *f, char *key, char *value, int *persist_flag)
-{
-	struct obj_symbol *sym;
-	int min, max;
-	char *p = value;
-
-	sym = obj_find_symbol(f, key);
-	if (sym == NULL) {
-		/* FIXME: For 2.2 kernel compatibility, only issue warnings for
-		 *        most error conditions.  Make these all errors in 2.5.
-		 */
-		lprintf("Warning: %s symbol for parameter %s not found", error_file, key);
-		return(1);
-	}
-
-	if (isdigit(*p)) {
-		min = strtoul(p, &p, 10);
-		if (*p == '-')
-			max = strtoul(p + 1, &p, 10);
-		else
-			max = min;
-	} else
-		min = max = 1;
-
-	if (max < min) {
-		lprintf("Warning: %s parameter %s has max < min!", error_file, key);
-		return(1);
-	}
-
-	switch (*p) {
-	case 'c':
-		if (!isdigit(p[1])) {
-			lprintf("%s parameter %s has no size after 'c'!", error_file, key);
-			return(1);
-		}
-		while (isdigit(p[1]))
-			++p;	/* swallow c array size */
-		break;
-	case 'b':	/* drop through */
-	case 'h':	/* drop through */
-	case 'i':	/* drop through */
-	case 'l':	/* drop through */
-	case 's':
-		break;
-	case '\0':
-		lprintf("%s parameter %s has no format character!", error_file, key);
-		return(1);
-	default:
-		lprintf("%s parameter %s has unknown format character '%c'", error_file, key, *p);
-		return(1);
-	}
-	switch (*++p) {
-	case 'p':
-		if (*(p-1) == 's') {
-			error("parameter %s is invalid persistent string", key);
-			return(1);
-		}
-		*persist_flag = 1;
-		break;
-	case '\0':
-		break;
-	default:
-		lprintf("%s parameter %s has unknown format modifier '%c'", error_file, key, *p);
-		return(1);
-	}
-	return(0);
-}
-
-/* Check that all module parameters have reasonable definitions */
-static void check_module_parameters(struct obj_file *f, int *persist_flag)
-{
-	struct obj_section *sec;
-	char *ptr, *value, *n, *endptr;
-	int namelen, err = 0;
-
-	sec = obj_find_section(f, ".modinfo");
-	if (sec == NULL) {
-		/* module does not support typed parameters */
-		return;
-	}
-
-	ptr = sec->contents;
-	endptr = ptr + sec->header.sh_size;
-	while (ptr < endptr && !err) {
-		value = strchr(ptr, '=');
-		n = strchr(ptr, '\0');
-		if (value) {
-			namelen = value - ptr;
-			if (namelen >= 5 && strncmp(ptr, "parm_", 5) == 0
-			    && !(namelen > 10 && strncmp(ptr, "parm_desc_", 10) == 0)) {
-				char *pname = xmalloc(namelen + 1);
-				strncpy(pname, ptr + 5, namelen - 5);
-				pname[namelen - 5] = '\0';
-				err = check_module_parameter(f, pname, value+1, persist_flag);
-				free(pname);
-			}
-		} else {
-			if (n - ptr >= 5 && strncmp(ptr, "parm_", 5) == 0) {
-				error("parameter %s found with no value", ptr);
-				err = 1;
-			}
-		}
-		ptr = n + 1;
-	}
-
-	if (err)
-		*persist_flag = 0;
-	return;
-}
-
-
-/* For common 3264 code, only compile the usage message once, in the 64 bit version */
-#if defined(COMMON_3264) && defined(ONLY_32)
-extern void insmod_usage(void);		/* Use the copy in the 64 bit version */
-#else	/* Common 64 bit version or any non common code - compile usage routine */
-void insmod_usage(void)
-{
-	fputs("Usage:\n"
-	      "insmod [-fhkLmnpqrsSvVxXyY] [-e persist_name] [-o module_name] [-O blob_name] [-P prefix] module [ symbol=value ... ]\n"
-	      "\n"
-	      "  module                Name of a loadable kernel module ('.o' can be omitted)\n"
-	      "  -f, --force           Force loading under wrong kernel version\n"
-	      "  -h, --help            Print this message\n"
-	      "  -k, --autoclean       Make module autoclean-able\n"
-	      "  -L, --lock            Prevent simultaneous loads of the same module\n"
-	      "  -m, --map             Generate load map (so crashes can be traced)\n"
-	      "  -n, --noload          Don't load, just show\n"
-	      "  -p, --probe           Probe mode; check if the module matches the kernel\n"
-	      "  -q, --quiet           Don't print unresolved symbols\n"
-	      "  -r, --root            Allow root to load modules not owned by root\n"
-	      "  -s, --syslog          Report errors via syslog\n"
-	      "  -S, --kallsyms        Force kallsyms on module\n"
-	      "  -v, --verbose         Verbose output\n"
-	      "  -V, --version         Show version\n"
-	      "  -x, --noexport        Do not export externs\n"
-	      "  -X, --export          Do export externs (default)\n"
-	      "  -y, --noksymoops      Do not add ksymoops symbols\n"
-	      "  -Y, --ksymoops        Do add ksymoops symbols (default)\n"
-	      "  -e persist_name\n"
-	      "      --persist=persist_name Filename to hold any persistent data from the module\n"
-	      "  -o NAME, --name=NAME  Set internal module name to NAME\n"
-	      "  -O NAME, --blob=NAME  Save the object as a binary blob in NAME\n"
-	      "  -P PREFIX\n"
-	      "      --prefix=PREFIX   Prefix for kernel or module symbols\n"
-	      ,stderr);
-	exit(1);
-}
-#endif	/* defined(COMMON_3264) && defined(ONLY_32) */
-
-#if defined(COMMON_3264) && defined(ONLY_32)
-#define INSMOD_MAIN insmod_main_32	/* 32 bit version */
-#elif defined(COMMON_3264) && defined(ONLY_64)
-#define INSMOD_MAIN insmod_main_64	/* 64 bit version */
-#else
-#define INSMOD_MAIN insmod_main		/* Not common code */
-#endif
-
-int INSMOD_MAIN(int argc, char **argv)
-{
-	int k_version;
-	int k_crcs;
-	char k_strversion[STRVERSIONLEN];
-	struct option long_opts[] = {
-		{"force", 0, 0, 'f'},
-		{"help", 0, 0, 'h'},
-		{"autoclean", 0, 0, 'k'},
-		{"lock", 0, 0, 'L'},
-		{"map", 0, 0, 'm'},
-		{"noload", 0, 0, 'n'},
-		{"probe", 0, 0, 'p'},
-		{"poll", 0, 0, 'p'},	/* poll is deprecated, remove in 2.5 */
-		{"quiet", 0, 0, 'q'},
-		{"root", 0, 0, 'r'},
-		{"syslog", 0, 0, 's'},
-		{"kallsyms", 0, 0, 'S'},
-		{"verbose", 0, 0, 'v'},
-		{"version", 0, 0, 'V'},
-		{"noexport", 0, 0, 'x'},
-		{"export", 0, 0, 'X'},
-		{"noksymoops", 0, 0, 'y'},
-		{"ksymoops", 0, 0, 'Y'},
-
-		{"persist", 1, 0, 'e'},
-		{"name", 1, 0, 'o'},
-		{"blob", 1, 0, 'O'},
-		{"prefix", 1, 0, 'P'},
-		{0, 0, 0, 0}
-	};
-	char *m_name = NULL;
-	char *blob_name = NULL;		/* Save object as binary blob */
-	int m_version;
-	ElfW(Addr) m_addr;
-	unsigned long m_size;
-	int m_crcs;
-	char m_strversion[STRVERSIONLEN];
-	char *filename;
-	char *persist_name = NULL;	/* filename to hold any persistent data */
-	int fp;
-	struct obj_file *f;
-	struct obj_section *kallsyms = NULL, *archdata = NULL;
-	int o;
-	int noload = 0;
-	int dolock = 1; /*Note: was: 0; */
-	int quiet = 0;
-	int exit_status = 1;
-	int force_kallsyms = 0;
-	int persist_parms = 0;	/* does module have persistent parms? */
-	int i;
-
-	error_file = "insmod";
-
-	/* To handle repeated calls from combined modprobe */
-	errors = optind = 0;
-
-	/* Process the command line.  */
-	while ((o = getopt_long(argc, argv, "fhkLmnpqrsSvVxXyYe:o:O:P:R:",
-				&long_opts[0], NULL)) != EOF)
-		switch (o) {
-		case 'f':	/* force loading */
-			flag_force_load = 1;
-			break;
-		case 'h':       /* Print the usage message. */
-			insmod_usage();
-			break;
-		case 'k':	/* module loaded by kerneld, auto-cleanable */
-			flag_autoclean = 1;
-			break;
-		case 'L':	/* protect against recursion.  */
-			dolock = 1;
-			break;
-		case 'm':	/* generate load map */
-			flag_load_map = 1;
-			break;
-		case 'n':	/* don't load, just check */
-			noload = 1;
-			break;
-		case 'p':	/* silent probe mode */
-			flag_silent_probe = 1;
-			break;
-		case 'q':	/* Don't print unresolved symbols */
-			quiet = 1;
-			break;
-		case 'r':	/* allow root to load non-root modules */
-			root_check_off = !root_check_off;
-			break;
-		case 's':	/* start syslog */
-			setsyslog("insmod");
-			break;
-		case 'S':	/* Force kallsyms */
-			force_kallsyms = 1;
-			break;
-		case 'v':	/* verbose output */
-			flag_verbose = 1;
-			break;
-		case 'V':
-			fputs("insmod version " MODUTILS_VERSION "\n", stderr);
-			break;
-		case 'x':	/* do not export externs */
-			flag_export = 0;
-			break;
-		case 'X':	/* do export externs */
-			flag_export = 1;
-			break;
-		case 'y':	/* do not define ksymoops symbols */
-			flag_ksymoops = 0;
-			break;
-		case 'Y':	/* do define ksymoops symbols */
-			flag_ksymoops = 1;
-			break;
-
-		case 'e':	/* persistent data filename */
-			free(persist_name);
-			persist_name = xstrdup(optarg);
-			break;
-		case 'o':	/* name the output module */
-			m_name = optarg;
-			break;
-		case 'O':	/* save the output module object */
-			blob_name = optarg;
-			break;
-		case 'P':	/* use prefix on crc */
-			set_ncv_prefix(optarg);
-			break;
-
-		default:
-			insmod_usage();
-			break;
-		}
-
-	if (optind >= argc) {
-		insmod_usage();
-	}
-	filename = argv[optind++];
-
-	if (config_read(0, NULL, "", NULL) < 0) {
-		error("Failed handle configuration");
-	}
-
-	if (persist_name && !*persist_name &&
-	    (!persistdir || !*persistdir)) {
-		free(persist_name);
-		persist_name = NULL;
-		if (flag_verbose)
-			lprintf("insmod: -e \"\" ignored, no persistdir");
-	}
-
-	if (m_name == NULL) {
-		size_t len;
-		char *p;
-
-		if ((p = strrchr(filename, '/')) != NULL)
-			p++;
-		else
-			p = filename;
-		len = strlen(p);
-		if (len > 2 && p[len - 2] == '.' && p[len - 1] == 'o')
-			len -= 2;
-		else if (len > 4 && p[len - 4] == '.' && p[len - 3] == 'm'
-			 && p[len - 2] == 'o' && p[len - 1] == 'd')
-			len -= 4;
-#ifdef CONFIG_USE_ZLIB
-		else if (len > 5 && !strcmp(p + len - 5, ".o.gz"))
-			len -= 5;
-#endif
-
-		m_name = xmalloc(len + 1);
-		memcpy(m_name, p, len);
-		m_name[len] = '\0';
-	}
-
-	/* Locate the file to be loaded.  */
-	if (!strchr(filename, '/') && !strchr(filename, '.')) {
-		char *tmp = search_module_path(filename);
-		if (tmp == NULL) {
-			error("%s: no module by that name found", filename);
-			return 1;
-		}
-		filename = tmp;
-		lprintf("Using %s", filename);
-	} else if (flag_verbose)
-		lprintf("Using %s", filename);
-
-	/* And open it.  */
-	if ((fp = gzf_open(filename, O_RDONLY)) == -1) {
-		error("%s: %m", filename);
-		return 1;
-	}
-	/* Try to prevent multiple simultaneous loads.  */
-	if (dolock)
-		flock(fp, LOCK_EX);
-
-	if (!get_kernel_info(K_SYMBOLS))
-		goto out;
-
-	/*
-	 * Set the genksyms prefix if this is a versioned kernel
-	 * and it's not already set.
-	 */
-	set_ncv_prefix(NULL);
-
-	for (i = 0; i < n_module_stat; ++i) {
-		if (strcmp(module_stat[i].name, m_name) == 0) {
-			error("a module named %s already exists", m_name);
-			goto out;
-		}
-	}
-
-	error_file = filename;
-	if ((f = obj_load(fp, ET_REL, filename)) == NULL)
-		goto out;
-
-	/* Version correspondence?  */
-	k_version = get_kernel_version(k_strversion);
-	m_version = get_module_version(f, m_strversion);
-	if (m_version == -1) {
-		error("couldn't find the kernel version the module was compiled for");
-		goto out;
-	}
-
-	k_crcs = is_kernel_checksummed();
-	m_crcs = is_module_checksummed(f);
-	if ((m_crcs == 0 || k_crcs == 0) &&
-	    strncmp(k_strversion, m_strversion, STRVERSIONLEN) != 0) {
-		if (flag_force_load) {
-			lprintf("Warning: kernel-module version mismatch\n"
-			      "\t%s was compiled for kernel version %s\n"
-				"\twhile this kernel is version %s",
-				filename, m_strversion, k_strversion);
-		} else {
-			if (!quiet)
-				error("kernel-module version mismatch\n"
-				      "\t%s was compiled for kernel version %s\n"
-				      "\twhile this kernel is version %s.",
-				      filename, m_strversion, k_strversion);
-			goto out;
-		}
-	}
-	if (m_crcs != k_crcs)
-		obj_set_symbol_compare(f, ncv_strcmp, ncv_symbol_hash);
-
-	/* Let the module know about the kernel symbols.  */
-	add_kernel_symbols(f);
-
-	/* Allocate common symbols, symbol tables, and string tables.
-	 *
-	 * The calls marked DEPMOD indicate the bits of code that depmod
-	 * uses to do a pseudo relocation, ignoring undefined symbols.
-	 * Any changes made to the relocation sequence here should be
-	 * checked against depmod.
-	 */
-#ifdef COMPAT_2_0
-	if (k_new_syscalls
-	    ? !create_this_module(f, m_name)
-	    : !old_create_mod_use_count(f))
-		goto out;
-#else
-	if (!create_this_module(f, m_name))
-		goto out;
-#endif
-
-	if (!obj_check_undefineds(f, quiet))	/* DEPMOD, obj_clear_undefineds */
-		goto out;
-	obj_allocate_commons(f);	/* DEPMOD */
-
-	check_module_parameters(f, &persist_parms);
-
-	if (optind < argc) {
-		if (!process_module_arguments(f, argc - optind, argv + optind, 1))
-			goto out;
-	}
-	arch_create_got(f);	/* DEPMOD */
-	hide_special_symbols(f);
-
-	if (persist_parms && persist_name && *persist_name) {
-		f->persist = persist_name;
-		persist_name = NULL;
-	}
-
-	if (persist_parms &&
-	    persist_name && !*persist_name) {
-		/* -e "".  This is ugly.  Take the filename, compare it against
-		 * each of the module paths until we find a match on the start
-		 * of the filename, assume the rest is the relative path.  Have
-		 * to do it this way because modprobe uses absolute filenames
-		 * for module names in modules.dep and the format of modules.dep
-		 * does not allow for any backwards compatible changes, so there
-		 * is nowhere to store the relative filename.  The only way this
-		 * should fail to calculate a relative path is "insmod ./xxx", for
-		 * that case the user has to specify -e filename.
-		 */
-		int j, l = strlen(filename);
-		char *relative = NULL;
-		char *p;
-		for (i = 0; i < nmodpath; ++i) {
-			p = modpath[i].path;
-			j = strlen(p);
-			while (j && p[j] == '/')
-				--j;
-			if (j < l && strncmp(filename, p, j) == 0 && filename[j] == '/') {
-				while (filename[j] == '/')
-					++j;
-				relative = xstrdup(filename+j);
-				break;
-			}
-		}
-		if (relative) {
-			i = strlen(relative);
-			if (i > 3 && strcmp(relative+i-3, ".gz") == 0)
-				relative[i -= 3] = '\0';
-			if (i > 2 && strcmp(relative+i-2, ".o") == 0)
-				relative[i -= 2] = '\0';
-			else if (i > 4 && strcmp(relative+i-4, ".mod") == 0)
-				relative[i -= 4] = '\0';
-			f->persist = xmalloc(strlen(persistdir) + 1 + i + 1);
-			strcpy(f->persist, persistdir);	/* safe, xmalloc */
-			strcat(f->persist, "/");	/* safe, xmalloc */
-			strcat(f->persist, relative);	/* safe, xmalloc */
-			free(relative);
-		}
-		else
-			error("Cannot calculate persistent filename");
-	}
-
-	if (f->persist && *(f->persist) != '/') {
-		error("Persistent filenames must be absolute, ignoring '%s'",
-			f->persist);
-		free(f->persist);
-		f->persist = NULL;
-	}
-
-	if (f->persist && !flag_ksymoops) {
-		error("has persistent data but ksymoops symbols are not available");
-		free(f->persist);
-		f->persist = NULL;
-	}
-
-	if (f->persist && !k_new_syscalls) {
-		error("has persistent data but the kernel is too old to support it");
-		free(f->persist);
-		f->persist = NULL;
-	}
-
-	if (persist_parms && flag_verbose) {
-		if (f->persist)
-			lprintf("Persist filename '%s'", f->persist);
-		else
-			lprintf("No persistent filename available");
-	}
-
-	if (f->persist) {
-		FILE *fp = fopen(f->persist, "r");
-		if (!fp) {
-			if (flag_verbose)
-				lprintf("Cannot open persist file '%s' %m", f->persist);
-		}
-		else {
-			int pargc = 0;
-			char *pargv[1000];	/* hard coded but big enough */
-			char line[3000];	/* hard coded but big enough */
-			char *p;
-			while (fgets(line, sizeof(line), fp)) {
-				p = strchr(line, '\n');
-				if (!p) {
-					error("Persistent data line is too long\n%s", line);
-					break;
-				}
-				*p = '\0';
-				p = line;
-				while (isspace(*p))
-					++p;
-				if (!*p || *p == '#')
-					continue;
-				if (pargc == sizeof(pargv)/sizeof(pargv[0])) {
-					error("More than %d persistent parameters", pargc);
-					break;
-				}
-				pargv[pargc++] = xstrdup(p);
-			}
-			fclose(fp);
-			if (!process_module_arguments(f, pargc, pargv, 0))
-				goto out;
-			while (pargc--)
-				free(pargv[pargc]);
-		}
-	}
-
-	if (flag_ksymoops)
-		add_ksymoops_symbols(f, filename, m_name);
-
-	if (k_new_syscalls)
-		create_module_ksymtab(f);
-
-	/* archdata based on relocatable addresses */
-	if (add_archdata(f, &archdata))
-		goto out;
-
-	/* kallsyms based on relocatable addresses */
-	if (add_kallsyms(f, &kallsyms, force_kallsyms))
-		goto out;
-	/**** No symbols or sections to be changed after kallsyms above ***/
-
-	if (errors)
-		goto out;
-
-	/* If we were just checking, we made it.  */
-	if (flag_silent_probe) {
-		exit_status = 0;
-		goto out;
-	}
-	/* Module has now finished growing; find its size and install it.  */
-	m_size = obj_load_size(f);	/* DEPMOD */
-
-	if (noload) {
-		/* Don't bother actually touching the kernel.  */
-		m_addr = 0x12340000;
-	} else {
-		errno = 0;
-		m_addr = create_module(m_name, m_size);
-		switch (errno) {
-		case 0:
-			break;
-		case EEXIST:
-			if (dolock) {
-				/*
-				 * Assume that we were just invoked
-				 * simultaneous with another insmod
-				 * and return success.
-				 */
-				exit_status = 0;
-				goto out;
-			}
-			error("a module named %s already exists", m_name);
-			goto out;
-		case ENOMEM:
-			error("can't allocate kernel memory for module; needed %lu bytes",
-			      m_size);
-			goto out;
-		default:
-			error("create_module: %m");
-			goto out;
-		}
-	}
-
-	/* module is already built, complete with ksymoops symbols for the
-	 * persistent filename.  If the kernel does not support persistent data
-	 * then give an error but continue.  It is too difficult to clean up at
-	 * this stage and this error will only occur on backported modules.
-	 * rmmod will also get an error so warn the user now.
-	 */
-	if (f->persist && !noload) {
-		struct {
-			struct module m;
-			int data;
-		} test_read;
-		memset(&test_read, 0, sizeof(test_read));
-		test_read.m.size_of_struct = -sizeof(test_read.m);      /* -ve size => read, not write */
-		test_read.m.read_start = m_addr + sizeof(struct module);
-		test_read.m.read_end = test_read.m.read_start + sizeof(test_read.data);
-		if (sys_init_module(m_name, (struct module *) &test_read)) {
-			int old_errors = errors;
-			error("has persistent data but the kernel is too old to support it."
-				"  Expect errors during rmmod as well");
-			errors = old_errors;
-		}
-	}
-
-	if (!obj_relocate(f, m_addr)) {	/* DEPMOD */
-		if (!noload)
-			delete_module(m_name);
-		goto out;
-	}
-
-	/* Do archdata again, this time we have the final addresses */
-	if (add_archdata(f, &archdata))
-		goto out;
-
-	/* Do kallsyms again, this time we have the final addresses */
-	if (add_kallsyms(f, &kallsyms, force_kallsyms))
-		goto out;
-
-#ifdef COMPAT_2_0
-	if (k_new_syscalls)
-		init_module(m_name, f, m_size, blob_name, noload, flag_load_map);
-	else if (!noload)
-		old_init_module(m_name, f, m_size);
-#else
-	init_module(m_name, f, m_size, blob_name, noload, flag_load_map);
-#endif
-	if (errors) {
-		if (!noload)
-			delete_module(m_name);
-		goto out;
-	}
-	exit_status = 0;
-
-      out:
-	if (dolock)
-		flock(fp, LOCK_UN);
-	close(fp);
-	if (!noload)
-		snap_shot(NULL, 0);
-
-	return exit_status;
-}
-
-/* For common 3264 code, add an overall insmod_main, in the 64 bit version. */
-#if defined(COMMON_3264) && defined(ONLY_64)
-int insmod_main(int argc, char **argv)
-{
-	if (arch64())
-		return insmod_main_64(argc, argv);
-	else
-		return insmod_main_32(argc, argv);
-}
-#endif	/* defined(COMMON_3264) && defined(ONLY_64) */
-
-
-
-int insmod_call(char * full_filename, char * params)
-{
-	int argc = 2;
-	char *argv[50];
-	char * ptr = params;
-	argv[0] = "stage1";
-	argv[1] = full_filename;
-
-	while (ptr != NULL) {
-		argv[argc] = ptr;
-		argc++;
-		ptr = strchr(ptr, ' ');
-		if (ptr) {
-			ptr[0] = '\0';
-			ptr++;
-		}
-	}
-
-	return insmod_main(argc, argv);
-}
diff --git a/mdk-stage1/insmod-modutils/obj/Makefile b/mdk-stage1/insmod-modutils/obj/Makefile
deleted file mode 100644
index 34b5df2d9..000000000
--- a/mdk-stage1/insmod-modutils/obj/Makefile
+++ /dev/null
@@ -1,33 +0,0 @@
- #******************************************************************************
- #
- #    insmod from modutils (generic)
- #
- # $Id$
- #
- # Copyright 1996, 1997 Linux International.
- #
- #*****************************************************************************
-
-top_dir = ../..
-
-include $(top_dir)/Makefile.common
-
-
-all: libobj.a
-
-clean:
-	rm -f *.o *.a
-
-
-INCS = -I./../include
-
-DEFS = -D_GNU_SOURCE -DELF_MACHINE_H='"elf_$(ARCH).h"' -DARCH_$(ARCH) -DCONFIG_ROOT_CHECK_OFF=0
-
-OBJS = obj_kallsyms.o obj_common.o obj_load.o obj_reloc.o obj_$(ARCH).o
-
-libobj.a: $(OBJS)
-	ar cru $@ $^
-	ranlib $@
-
-.c.o:
-	gcc $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -c $<
diff --git a/mdk-stage1/insmod-modutils/obj/obj_alpha.c b/mdk-stage1/insmod-modutils/obj/obj_alpha.c
deleted file mode 100644
index 4006b3442..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_alpha.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/* Alpha specific support for Elf loading and relocation.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-/*======================================================================*/
-
-struct alpha_got_entry
-{
-  struct alpha_got_entry *next;
-  ElfW(Addr) addend;
-  int offset;
-  int reloc_done;
-};
-
-struct alpha_file
-{
-  struct obj_file root;
-  struct obj_section *got;
-};
-
-struct alpha_symbol
-{
-  struct obj_symbol root;
-  struct alpha_got_entry *got_entries;
-};
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  struct alpha_file *f;
-  f = xmalloc(sizeof(*f));
-  f->got = NULL;
-  return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  struct alpha_symbol *sym;
-  sym = xmalloc(sizeof(*sym));
-  sym->got_entries = NULL;
-  return &sym->root;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *f,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf64_Rela *rel,
-		       Elf64_Addr v)
-{
-  struct alpha_file *af = (struct alpha_file *)f;
-  struct alpha_symbol *asym = (struct alpha_symbol *)sym;
-
-  unsigned long *lloc = (unsigned long *)(targsec->contents + rel->r_offset);
-  unsigned int *iloc = (unsigned int *)lloc;
-  Elf64_Addr dot = targsec->header.sh_addr + rel->r_offset;
-  Elf64_Addr gp = af->got->header.sh_addr + 0x8000;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF64_R_TYPE(rel->r_info))
-    {
-    case R_ALPHA_NONE:
-    case R_ALPHA_LITUSE:
-      break;
-
-    case R_ALPHA_REFQUAD:
-      *lloc += v;
-      break;
-
-    case R_ALPHA_GPREL32:
-      v -= gp;
-      if ((Elf64_Sxword)v > 0x7fffffff
-	  || (Elf64_Sxword)v < -(Elf64_Sxword)0x80000000)
-	ret = obj_reloc_overflow;
-      *iloc = v;
-      break;
-
-    case R_ALPHA_LITERAL:
-      {
-	struct alpha_got_entry *gotent;
-
-	assert(asym != NULL);
-	gotent = asym->got_entries;
-	while (gotent->addend != rel->r_addend)
-	  gotent = gotent->next;
-
-	if (!gotent->reloc_done)
-	  {
-	    *(unsigned long *)(af->got->contents + gotent->offset) = v;
-	    gotent->reloc_done = 1;
-	  }
-
-	*iloc = (*iloc & ~0xffff) | ((gotent->offset - 0x8000) & 0xffff);
-      }
-    break;
-
-    case R_ALPHA_GPDISP:
-      {
-	unsigned int *p_ldah, *p_lda;
-	unsigned int i_ldah, i_lda, hi, lo;
-
-	p_ldah = iloc;
-	p_lda = (unsigned int *)((char *)iloc + rel->r_addend);
-	i_ldah = *p_ldah;
-	i_lda = *p_lda;
-
-	/* Make sure the instructions are righteous.  */
-	if ((i_ldah >> 26) != 9 || (i_lda >> 26) != 8)
-	  ret = obj_reloc_dangerous;
-
-	/* Extract the existing addend.  */
-	v = (i_ldah & 0xffff) << 16 | (i_lda & 0xffff);
-	v = (v ^ 0x80008000) - 0x80008000;
-
-	v += gp - dot;
-
-	if ((Elf64_Sxword)v >= 0x7fff8000
-	    || (Elf64_Sxword)v < -(Elf64_Sxword)0x80000000)
-	  ret = obj_reloc_overflow;
-
-	/* Modify the instructions and finish up.  */
-	lo = v & 0xffff;
-	hi = ((v >> 16) + ((v >> 15) & 1)) & 0xffff;
-
-	*p_ldah = (i_ldah & 0xffff0000) | hi;
-	*p_lda = (i_lda & 0xffff0000) | lo;
-      }
-    break;
-
-    case R_ALPHA_BRADDR:
-      v -= dot + 4;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      else if ((Elf64_Sxword)v > 0x3fffff
-	       || (Elf64_Sxword)v < -(Elf64_Sxword)0x400000)
-	ret = obj_reloc_overflow;
-      v /= 4;
-
-      *iloc = (*iloc & ~0x1fffff) | (v & 0x1fffff);
-      break;
-
-    case R_ALPHA_HINT:
-      v -= dot + 4;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      v /= 4;
-
-      *iloc = (*iloc & ~0x3fff) | (v & 0x3fff);
-      break;
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
-  struct alpha_file *af = (struct alpha_file *)f;
-  int i, n, offset = 0;
-
-  n = af->root.header.e_shnum;
-  for (i = 0; i < n; ++i)
-    {
-      struct obj_section *relsec, *symsec, *strsec;
-      Elf64_Rela *rel, *relend;
-      Elf64_Sym *symtab;
-      const char *strtab;
-
-      relsec = af->root.sections[i];
-      if (relsec->header.sh_type != SHT_RELA)
-	continue;
-
-      symsec = af->root.sections[relsec->header.sh_link];
-      strsec = af->root.sections[symsec->header.sh_link];
-
-      rel = (Elf64_Rela *)relsec->contents;
-      relend = rel + (relsec->header.sh_size / sizeof(Elf64_Rela));
-      symtab = (Elf64_Sym *)symsec->contents;
-      strtab = (const char *)strsec->contents;
-
-      for (; rel < relend; ++rel)
-	{
-	  struct alpha_got_entry *ent;
-	  Elf64_Sym *extsym;
-	  struct alpha_symbol *intsym;
-	  const char *name;
-
-	  if (ELF64_R_TYPE(rel->r_info) != R_ALPHA_LITERAL)
-	    continue;
-
-	  extsym = &symtab[ELF64_R_SYM(rel->r_info)];
-	  if (extsym->st_name)
-	    name = strtab + extsym->st_name;
-	  else
-	    name = f->sections[extsym->st_shndx]->name;
-	  intsym = (struct alpha_symbol *)obj_find_symbol(&af->root, name);
-
-	  for (ent = intsym->got_entries; ent ; ent = ent->next)
-	    if (ent->addend == rel->r_addend)
-	      goto found;
-
-	  ent = xmalloc(sizeof(*ent));
-	  ent->addend = rel->r_addend;
-	  ent->offset = offset;
-	  ent->reloc_done = 0;
-	  ent->next = intsym->got_entries;
-	  intsym->got_entries = ent;
-	  offset += 8;
-
-	found:;
-	}
-    }
-
-  if (offset > 0x10000)
-    {
-      error(".got section overflow: %#x > 0x10000", offset);
-      return 0;
-    }
-
-  /* We always want a .got section so that we always have a GP for
-     use with GPDISP and GPREL32 relocs.  Besides, if the section
-     is empty we don't use up space anyway.  */
-  af->got = obj_create_alloced_section(&af->root, ".got", 8, offset);
-
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  struct alpha_file *af = (struct alpha_file *)f;
-
-  mod->gp = af->got->header.sh_addr + 0x8000;
-
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf64_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_arm.c b/mdk-stage1/insmod-modutils/obj/obj_arm.c
deleted file mode 100644
index 7a843f947..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_arm.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/* ARM specific support for Elf loading and relocation.
-   Copyright 1996, 1997, 1998 Linux International.
-
-   Contributed by Phil Blundell <philb@gnu.org>
-   and wms <woody@corelcomputer.com>
-   based on the i386 code by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct arm_plt_entry
-{
-  int offset;
-  int allocated:1;
-  int inited:1;                // has been set up
-};
-
-struct arm_got_entry
-{
-  int offset;
-  int allocated : 1;
-  unsigned reloc_done : 1;
-};
-
-struct arm_file
-{
-  struct obj_file root;
-  struct obj_section *plt;
-  struct obj_section *got;
-};
-
-struct arm_symbol
-{
-  struct obj_symbol root;
-  struct arm_plt_entry pltent;
-  struct arm_got_entry gotent;
-};
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  struct arm_file *f;
-  f = xmalloc(sizeof(*f));
-  f->got = NULL;
-  return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  struct arm_symbol *sym;
-  sym = xmalloc(sizeof(*sym));
-  memset(&sym->gotent, 0, sizeof(sym->gotent));
-  memset(&sym->pltent, 0, sizeof(sym->pltent));
-  return &sym->root;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *f,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf32_Rel *rel,
-		       Elf32_Addr v)
-{
-  struct arm_file *afile = (struct arm_file *)f;
-  struct arm_symbol *asym  = (struct arm_symbol *)sym;
-
-  Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
-  Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-  Elf32_Addr got = afile->got ? afile->got->header.sh_addr : 0;
-  Elf32_Addr plt = afile->plt ? afile->plt->header.sh_addr : 0;
-
-  struct arm_plt_entry *pe;
-  unsigned long *ip;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF32_R_TYPE(rel->r_info))
-    {
-    case R_ARM_NONE:
-      break;
-
-    case R_ARM_ABS32:
-      *loc += v;
-      break;
-
-    case R_ARM_GOT32:
-      /* needs an entry in the .got: set it, once */
-      if (! asym->gotent.reloc_done)
-	{
-	  asym->gotent.reloc_done = 1;
-	  *(Elf32_Addr *)(afile->got->contents + asym->gotent.offset) = v;
-	}
-      /* make the reloc with_respect_to_.got */
-      *loc += asym->gotent.offset;
-      break;
-
-      /* relative reloc, always to _GLOBAL_OFFSET_TABLE_ (which is .got)
-	 similar to branch, but is full 32 bits relative */
-    case R_ARM_GOTPC:
-      assert(got);
-      *loc += got - dot;
-      break;
-
-    case R_ARM_PC24:
-    case R_ARM_PLT32:
-      /* find the plt entry and initialize it if necessary */
-      assert(asym != NULL);
-      pe = (struct arm_plt_entry*) &asym->pltent;
-      if (! pe->inited)
-	{
-	  ip = (unsigned long *) (afile->plt->contents + pe->offset);
-	  ip[0] = 0xe51ff004;			/* ldr pc,[pc,#-4] */
-	  ip[1] = v;				/* sym@ */
-	  pe->inited = 1;
-	}
-
-      /* relative distance to target */
-      v -= dot;
-      /* if the target is too far away.... */
-      if ((int)v < -0x02000000 || (int)v >= 0x02000000)
-	{
-	  /* go via the plt */
-	  v = plt + pe->offset - dot;
-	}
-      if (v & 3)
-	ret = obj_reloc_dangerous;
-
-      /* Convert to words. */
-      v >>= 2;
-
-      /* merge the offset into the instruction. */
-      *loc = (*loc & ~0x00ffffff) | ((v + *loc) & 0x00ffffff);
-      break;
-
-      /* address relative to the got */
-    case R_ARM_GOTOFF:
-      assert(got);
-      *loc += v - got;
-      break;
-
-    default:
-      printf("Warning: unhandled reloc %d\n",ELF32_R_TYPE(rel->r_info));
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
-  struct arm_file *afile = (struct arm_file *) f;
-  int i;
-  struct obj_section *sec, *syms, *strs;
-  ElfW(Rel) *rel, *relend;
-  ElfW(Sym) *symtab, *extsym;
-  const char *strtab, *name;
-  struct arm_symbol *intsym;
-  struct arm_plt_entry *pe;
-  struct arm_got_entry *ge;
-  int got_offset = 0, plt_offset = 0;
-
-  for (i = 0; i < f->header.e_shnum; ++i)
-    {
-      sec = f->sections[i];
-      if (sec->header.sh_type != SHT_RELM)
-	continue;
-      syms = f->sections[sec->header.sh_link];
-      strs = f->sections[syms->header.sh_link];
-
-      rel = (ElfW(RelM) *) sec->contents;
-      relend = rel + (sec->header.sh_size / sizeof(ElfW(RelM)));
-      symtab = (ElfW(Sym) *) syms->contents;
-      strtab = (const char *) strs->contents;
-
-      for (; rel < relend; ++rel)
-	{
-	  extsym = &symtab[ELF32_R_SYM(rel->r_info)];
-
-	  switch(ELF32_R_TYPE(rel->r_info)) {
-	  case R_ARM_PC24:
-	  case R_ARM_PLT32:
-	    if (extsym->st_name)
-	      name = strtab + extsym->st_name;
-	    else
-	      name = f->sections[extsym->st_shndx]->name;
-	    intsym = (struct arm_symbol *) obj_find_symbol(f, name);
-
-	    pe = &intsym->pltent;
-
-	    if (! pe->allocated)
-	      {
-		pe->allocated = 1;
-		pe->offset = plt_offset;
-		plt_offset += 8;
-		pe->inited = 0;
-	      }
-	    break;
-
-	    /* these two don_t need got entries, but they need
-	       the .got to exist */
-	  case R_ARM_GOTOFF:
-	  case R_ARM_GOTPC:
-	    if (got_offset==0) got_offset = 4;
-	    break;
-
-	  case R_ARM_GOT32:
-	    if (extsym->st_name)
-	      name = strtab + extsym->st_name;
-	    else
-	      name = f->sections[extsym->st_shndx]->name;
-	    intsym = (struct arm_symbol *) obj_find_symbol(f, name);
-
-	    ge = (struct arm_got_entry *) &intsym->gotent;
-	    if (! ge->allocated)
-	      {
-		ge->allocated = 1;
-		ge->offset = got_offset;
-		got_offset += sizeof(void*);
-	      }
-	    break;
-
-	  default:
-	    continue;
-	  }
-	}
-    }
-
-  /* if there was a _GLOBAL_OFFSET_TABLE_, then the .got section
-   exists already; find it and use it */
-  if (got_offset)
-  {
-      struct obj_section* sec = obj_find_section(f, ".got");
-      if (sec)
-	obj_extend_section(sec, got_offset);
-      else
-	{
-	  sec = obj_create_alloced_section(f, ".got", 8, got_offset);
-	  assert(sec);
-	}
-      afile->got = sec;
-  }
-
-  if (plt_offset)
-    afile->plt = obj_create_alloced_section(f, ".plt", 8, plt_offset);
-
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_common.c b/mdk-stage1/insmod-modutils/obj/obj_common.c
deleted file mode 100644
index 2a6606c94..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_common.c
+++ /dev/null
@@ -1,399 +0,0 @@
-/* Elf file, section, and symbol manipulation routines.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <string.h>
-#include <assert.h>
-
-#include <obj.h>
-#include <util.h>
-#include <module.h>
-
-/*======================================================================*/
-
-/* Standard ELF hash function.  */
-inline unsigned long
-obj_elf_hash_n(const char *name, unsigned long n)
-{
-  unsigned long h = 0;
-  unsigned long g;
-  unsigned char ch;
-
-  while (n > 0)
-    {
-      ch = *name++;
-      h = (h << 4) + ch;
-      if ((g = (h & 0xf0000000)) != 0)
-	{
-	  h ^= g >> 24;
-	  h &= ~g;
-	}
-      n--;
-    }
-  return h;
-}
-
-unsigned long
-obj_elf_hash (const char *name)
-{
-  return obj_elf_hash_n(name, strlen(name));
-}
-
-void
-obj_set_symbol_compare (struct obj_file *f,
-			int (*cmp)(const char *, const char *),
-			unsigned long (*hash)(const char *))
-{
-  if (cmp)
-    f->symbol_cmp = cmp;
-  if (hash)
-    {
-      struct obj_symbol *tmptab[HASH_BUCKETS], *sym, *next;
-      int i;
-
-      f->symbol_hash = hash;
-
-      memcpy(tmptab, f->symtab, sizeof(tmptab));
-      memset(f->symtab, 0, sizeof(f->symtab));
-
-      for (i = 0; i < HASH_BUCKETS; ++i)
-	for (sym = tmptab[i]; sym ; sym = next)
-	  {
-	    unsigned long h = hash(sym->name) % HASH_BUCKETS;
-	    next = sym->next;
-	    sym->next = f->symtab[h];
-	    f->symtab[h] = sym;
-	  }
-    }
-}
-
-struct obj_symbol *
-obj_add_symbol (struct obj_file *f, const char *name, unsigned long symidx,
-		int info, int secidx, ElfW(Addr) value, unsigned long size)
-{
-  struct obj_symbol *sym;
-  unsigned long hash = f->symbol_hash(name) % HASH_BUCKETS;
-  int n_type = ELFW(ST_TYPE)(info);
-  int n_binding = ELFW(ST_BIND)(info);
-
-  for (sym = f->symtab[hash]; sym; sym = sym->next)
-    if (f->symbol_cmp(sym->name, name) == 0)
-      {
-	int o_secidx = sym->secidx;
-	int o_info = sym->info;
-	int o_type = ELFW(ST_TYPE)(o_info);
-	int o_binding = ELFW(ST_BIND)(o_info);
-
-	/* A redefinition!  Is it legal?  */
-
-	if (secidx == SHN_UNDEF)
-	  return sym;
-	else if (o_secidx == SHN_UNDEF)
-	  goto found;
-	else if (n_binding == STB_GLOBAL && o_binding == STB_LOCAL)
-	  {
-	    /* Cope with local and global symbols of the same name
-	       in the same object file, as might have been created
-	       by ld -r.  The only reason locals are now seen at this
-	       level at all is so that we can do semi-sensible things
-	       with parameters.  */
-
-	    struct obj_symbol *nsym, **p;
-
-	    nsym = arch_new_symbol();
-	    nsym->next = sym->next;
-	    nsym->ksymidx = -1;
-
-	    /* Excise the old (local) symbol from the hash chain.  */
-	    for (p = &f->symtab[hash]; *p != sym; p = &(*p)->next)
-	      continue;
-	    *p = sym = nsym;
-	    goto found;
-	  }
-	else if (n_binding == STB_LOCAL)
-	  {
-	    /* Another symbol of the same name has already been defined.
-	       Just add this to the local table.  */
-	    sym = arch_new_symbol();
-	    sym->next = NULL;
-	    sym->ksymidx = -1;
-	    f->local_symtab[symidx] = sym;
-	    goto found;
-	  }
-	else if (n_binding == STB_WEAK)
-	  return sym;
-	else if (o_binding == STB_WEAK)
-	  goto found;
-	/* Don't unify COMMON symbols with object types the programmer
-	   doesn't expect.  */
-	else if (secidx == SHN_COMMON
-		 && (o_type == STT_NOTYPE || o_type == STT_OBJECT))
-	  return sym;
-	else if (o_secidx == SHN_COMMON
-		 && (n_type == STT_NOTYPE || n_type == STT_OBJECT))
-	  goto found;
-	else
-	  {
-	    /* Don't report an error if the symbol is coming from
-	       the kernel or some external module.  */
-	    if (secidx <= SHN_HIRESERVE)
-	      error("%s multiply defined", name);
-	    return sym;
-	  }
-      }
-
-  /* Completely new symbol.  */
-  sym = arch_new_symbol();
-  sym->next = f->symtab[hash];
-  f->symtab[hash] = sym;
-  sym->ksymidx = -1;
-
-  if (ELFW(ST_BIND)(info) == STB_LOCAL && symidx != -1) {
-    if (symidx >= f->local_symtab_size)
-      error("local symbol %s with index %ld exceeds local_symtab_size %ld",
-        name, (long) symidx, (long) f->local_symtab_size);
-    else
-      f->local_symtab[symidx] = sym;
-  }
-
-found:
-  sym->name = name;
-  sym->value = value;
-  sym->size = size;
-  sym->secidx = secidx;
-  sym->info = info;
-  sym->r_type = 0;	/* should be R_arch_NONE for all arch */
-
-  return sym;
-}
-
-struct obj_symbol *
-obj_find_symbol (struct obj_file *f, const char *name)
-{
-  struct obj_symbol *sym;
-  unsigned long hash = f->symbol_hash(name) % HASH_BUCKETS;
-
-  for (sym = f->symtab[hash]; sym; sym = sym->next)
-    if (f->symbol_cmp(sym->name, name) == 0)
-      return sym;
-
-  return NULL;
-}
-
-ElfW(Addr)
-obj_symbol_final_value (struct obj_file *f, struct obj_symbol *sym)
-{
-  if (sym)
-    {
-      if (sym->secidx >= SHN_LORESERVE)
-	return sym->value;
-
-      return sym->value + f->sections[sym->secidx]->header.sh_addr;
-    }
-  else
-    {
-      /* As a special case, a NULL sym has value zero.  */
-      return 0;
-    }
-}
-
-struct obj_section *
-obj_find_section (struct obj_file *f, const char *name)
-{
-  int i, n = f->header.e_shnum;
-
-  for (i = 0; i < n; ++i)
-    if (strcmp(f->sections[i]->name, name) == 0)
-      return f->sections[i];
-
-  return NULL;
-}
-
-static int
-obj_load_order_prio(struct obj_section *a)
-{
-  unsigned long af, ac;
-
-  af = a->header.sh_flags;
-
-  ac = 0;
-  if (a->name[0] != '.' || strlen(a->name) != 10 ||
-      strcmp(a->name + 5, ".init")) ac |= 32;
-  if (af & SHF_ALLOC) ac |= 16;
-  if (!(af & SHF_WRITE)) ac |= 8;
-  if (af & SHF_EXECINSTR) ac |= 4;
-  if (a->header.sh_type != SHT_NOBITS) ac |= 2;
-#if defined(ARCH_ia64)
-  if (af & SHF_IA_64_SHORT) ac -= 1;
-#endif
-
-  return ac;
-}
-
-void
-obj_insert_section_load_order (struct obj_file *f, struct obj_section *sec)
-{
-  struct obj_section **p;
-  int prio = obj_load_order_prio(sec);
-  for (p = f->load_order_search_start; *p ; p = &(*p)->load_next)
-    if (obj_load_order_prio(*p) < prio)
-      break;
-  sec->load_next = *p;
-  *p = sec;
-}
-
-struct obj_section *
-obj_create_alloced_section (struct obj_file *f, const char *name,
-			    unsigned long align, unsigned long size)
-{
-  int newidx = f->header.e_shnum++;
-  struct obj_section *sec;
-
-  f->sections = xrealloc(f->sections, (newidx+1) * sizeof(sec));
-  f->sections[newidx] = sec = arch_new_section();
-
-  memset(sec, 0, sizeof(*sec));
-  sec->header.sh_type = SHT_PROGBITS;
-  sec->header.sh_flags = SHF_WRITE|SHF_ALLOC;
-  sec->header.sh_size = size;
-  sec->header.sh_addralign = align;
-  sec->name = name;
-  sec->idx = newidx;
-  if (size)
-    sec->contents = xmalloc(size);
-
-  obj_insert_section_load_order(f, sec);
-
-  return sec;
-}
-
-struct obj_section *
-obj_create_alloced_section_first (struct obj_file *f, const char *name,
-				  unsigned long align, unsigned long size)
-{
-  int newidx = f->header.e_shnum++;
-  struct obj_section *sec;
-
-  f->sections = xrealloc(f->sections, (newidx+1) * sizeof(sec));
-  f->sections[newidx] = sec = arch_new_section();
-
-  memset(sec, 0, sizeof(*sec));
-  sec->header.sh_type = SHT_PROGBITS;
-  sec->header.sh_flags = SHF_WRITE|SHF_ALLOC;
-  sec->header.sh_size = size;
-  sec->header.sh_addralign = align;
-  sec->name = name;
-  sec->idx = newidx;
-  if (size)
-    sec->contents = xmalloc(size);
-
-  sec->load_next = f->load_order;
-  f->load_order = sec;
-  if (f->load_order_search_start == &f->load_order)
-    f->load_order_search_start = &sec->load_next;
-
-  return sec;
-}
-
-void *
-obj_extend_section (struct obj_section *sec, unsigned long more)
-{
-  unsigned long oldsize = sec->header.sh_size;
-  sec->contents = xrealloc(sec->contents, sec->header.sh_size += more);
-  return sec->contents + oldsize;
-}
-
-/* Convert an object pointer (address) to a native pointer and vice versa.
- * It gets interesting when the object has 64 bit pointers but modutils
- * is running 32 bit.  This is nasty code but it stops the compiler giving
- * spurious warning messages.  "I know what I am doing" ...
- */
-
-void *
-obj_addr_to_native_ptr (ElfW(Addr) addr)
-{
-	unsigned int convert = (sizeof(void *) << 8) + sizeof(addr);	/* to, from */
-	union obj_ptr_4 p4;
-	union obj_ptr_8 p8;
-	switch (convert) {
-	case 0x0404:
-		p4.addr = addr;
-		return(p4.ptr);
-		break;
-	case 0x0408:
-		p4.addr = addr;
-		if (p4.addr != addr) {
-			error("obj_addr_to_native_ptr truncation %" tgt_long_fmt "x",
-				(tgt_long) addr);
-			exit(1);
-		}
-		return(p4.ptr);
-		break;
-	case 0x0804:
-		p8.addr = addr;
-		return(p8.ptr);
-		break;
-	case 0x0808:
-		p8.addr = addr;
-		return(p8.ptr);
-		break;
-	default:
-		error("obj_addr_to_native_ptr unknown conversion 0x%04x", convert);
-		exit(1);
-	}
-}
-
-ElfW(Addr)
-obj_native_ptr_to_addr (void *ptr)
-{
-	unsigned int convert = (sizeof(ElfW(Addr)) << 8) + sizeof(ptr);	/* to, from */
-	union obj_ptr_4 p4;
-	union obj_ptr_8 p8;
-	switch (convert) {
-	case 0x0404:
-		p4.ptr = ptr;
-		return(p4.addr);
-		break;
-	case 0x0408:
-		p8.ptr = ptr;
-		p4.addr = p8.addr;
-		if (p4.addr != p8.addr) {
-			error("obj_native_ptr_to_addr truncation %" tgt_long_fmt "x",
-				(tgt_long) p8.addr);
-			exit(1);
-		}
-		return(p4.addr);
-		break;
-	case 0x0804:
-		p4.ptr = ptr;
-		return(p4.addr);	/* compiler expands to 8 */
-		break;
-	case 0x0808:
-		p8.ptr = ptr;
-		return(p8.addr);
-		break;
-	default:
-		error("obj_native_ptr_to_addr unknown conversion 0x%04x", convert);
-		exit(1);
-	}
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_hppa.c b/mdk-stage1/insmod-modutils/obj/obj_hppa.c
deleted file mode 100644
index 4207e692e..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_hppa.c
+++ /dev/null
@@ -1,668 +0,0 @@
-/*
- * PA-RISC specific support for Elf loading and relocation.
- * Copyright 2000 David Huggins-Daines <dhd@linuxcare.com>, Linuxcare Inc.
- * Copyright 2000 Richard Hirst <rhirst@linuxcare.com>, Linuxcare Inc.
- *
- * Based on the IA-64 support, which is:
- * Copyright 2000 Mike Stephens <mike.stephens@intel.com>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <stdlib.h>
-#include <string.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-#include <modstat.h>	/* For ksyms */
-
-
-typedef struct _hppa_stub_t
-{
-  struct _hppa_stub_t *next;
-  int offset;
-  int reloc_done;
-} hppa_stub_t;
-
-typedef struct _hppa_symbol_t
-{
-  struct obj_symbol root;
-  hppa_stub_t *stub;
-} hppa_symbol_t;
-
-typedef struct _hppa_file_t
-{
-  struct obj_file root;
-  struct obj_section *stub;
-  Elf32_Addr dp;
-} hppa_file_t;
-
-/* The ABI defines various more esoteric types, but these are the only
-   ones we actually need. */
-enum hppa_fsel
-{
-  e_fsel,
-  e_lsel,
-  e_rsel,
-  e_lrsel,
-  e_rrsel
-};
-
-/* This could be a call to obj_create_alloced_section() followed
- * by an overwrite of sec->header.sh_flags.
- */
-
-struct obj_section *
-obj_hppa_create_alloced_section (struct obj_file *f, const char *name,
-				 unsigned long align, unsigned long size,
-				 unsigned long sh_flags)
-{
-  int newidx = f->header.e_shnum++;
-  struct obj_section *sec;
-
-  f->sections = xrealloc(f->sections, (newidx+1) * sizeof(sec));
-  f->sections[newidx] = sec = arch_new_section();
-
-  memset(sec, 0, sizeof(*sec));
-  sec->header.sh_type = SHT_PROGBITS;
-  sec->header.sh_flags = sh_flags;
-  sec->header.sh_size = size;
-  sec->header.sh_addralign = align;
-  sec->name = name;
-  sec->idx = newidx;
-  if (size)
-    sec->contents = xmalloc(size);
-
-  obj_insert_section_load_order(f, sec);
-
-  return sec;
-}
-
-struct obj_file *
-arch_new_file (void)
-{
-  hppa_file_t *f;
-  f = xmalloc(sizeof(*f));
-  f->stub = NULL;
-  return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  hppa_symbol_t *sym;
-  sym = xmalloc(sizeof(*sym));
-  sym->stub = NULL;
-  return &sym->root;
-}
-
-/* This is called for architecture specific sections we might need to
-   do special things to. */
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-  /* Assume it's just a debugging section that we can safely
-     ignore ...  */
-  sec->contents = NULL;
-
-  return 0;
-}
-
-/* =================================================================
-
-   These functions are from libhppa.h in the GNU BFD library.
-   (c) 1990, 91, 92, 93, 94, 95, 96, 98, 99, 2000
-   Free Software Foundation, Inc.
-
-   ================================================================= */
-
-/* The *sign_extend functions are used to assemble various bitfields
-   taken from an instruction and return the resulting immediate
-   value.  */
-
-static inline int
-sign_extend (x, len)
-     int x, len;
-{
-  int signbit = (1 << (len - 1));
-  int mask = (signbit << 1) - 1;
-  return ((x & mask) ^ signbit) - signbit;
-}
-
-static inline int
-low_sign_extend (x, len)
-     int x, len;
-{
-  return (x >> 1) - ((x & 1) << (len - 1));
-}
-
-
-/* The re_assemble_* functions prepare an immediate value for
-   insertion into an opcode. pa-risc uses all sorts of weird bitfields
-   in the instruction to hold the value.  */
-
-static inline int
-sign_unext (x, len)
-     int x, len;
-{
-  int len_ones;
-
-  len_ones = (1 << len) - 1;
-
-  return x & len_ones;
-}
-
-static inline int
-low_sign_unext (x, len)
-     int x, len;
-{
-  int temp;
-  int sign;
-
-  sign = (x >> (len-1)) & 1;
-
-  temp = sign_unext (x, len-1);
-
-  return (temp << 1) | sign;
-}
-
-static inline int
-re_assemble_3 (as3)
-     int as3;
-{
-  return ((  (as3 & 4) << (13-2))
-	  | ((as3 & 3) << (13+1)));
-}
-
-static inline int
-re_assemble_12 (as12)
-     int as12;
-{
-  return ((  (as12 & 0x800) >> 11)
-	  | ((as12 & 0x400) >> (10 - 2))
-	  | ((as12 & 0x3ff) << (1 + 2)));
-}
-
-static inline int
-re_assemble_14 (as14)
-     int as14;
-{
-  return ((  (as14 & 0x1fff) << 1)
-	  | ((as14 & 0x2000) >> 13));
-}
-
-static inline int
-re_assemble_16 (as16)
-     int as16;
-{
-  int s, t;
-
-  /* Unusual 16-bit encoding, for wide mode only.  */
-  t = (as16 << 1) & 0xffff;
-  s = (as16 & 0x8000);
-  return (t ^ s ^ (s >> 1)) | (s >> 15);
-}
-
-static inline int
-re_assemble_17 (as17)
-     int as17;
-{
-  return ((  (as17 & 0x10000) >> 16)
-	  | ((as17 & 0x0f800) << (16 - 11))
-	  | ((as17 & 0x00400) >> (10 - 2))
-	  | ((as17 & 0x003ff) << (1 + 2)));
-}
-
-static inline int
-re_assemble_21 (as21)
-     int as21;
-{
-  return ((  (as21 & 0x100000) >> 20)
-	  | ((as21 & 0x0ffe00) >> 8)
-	  | ((as21 & 0x000180) << 7)
-	  | ((as21 & 0x00007c) << 14)
-	  | ((as21 & 0x000003) << 12));
-}
-
-static inline int
-re_assemble_22 (as22)
-     int as22;
-{
-  return ((  (as22 & 0x200000) >> 21)
-	  | ((as22 & 0x1f0000) << (21 - 16))
-	  | ((as22 & 0x00f800) << (16 - 11))
-	  | ((as22 & 0x000400) >> (10 - 2))
-	  | ((as22 & 0x0003ff) << (1 + 2)));
-}
-
-
-/* Handle field selectors for PA instructions.
-   The L and R (and LS, RS etc.) selectors are used in pairs to form a
-   full 32 bit address.  eg.
-
-   LDIL	L'start,%r1		; put left part into r1
-   LDW	R'start(%r1),%r2	; add r1 and right part to form address
-
-   This function returns sign extended values in all cases.
-*/
-
-static inline unsigned int
-hppa_field_adjust (value, addend, r_field)
-     unsigned int value;
-     int addend;
-     enum hppa_fsel r_field;
-{
-  unsigned int sym_val;
-
-  sym_val = value - addend;
-  switch (r_field)
-    {
-    case e_fsel:
-      /* F: No change.  */
-      break;
-
-    case e_lsel:
-      /* L:  Select top 21 bits.  */
-      value = value >> 11;
-      break;
-
-    case e_rsel:
-      /* R:  Select bottom 11 bits.  */
-      value = value & 0x7ff;
-      break;
-
-    case e_lrsel:
-      /* LR:  L with rounding of the addend to nearest 8k.  */
-      value = sym_val + ((addend + 0x1000) & -0x2000);
-      value = value >> 11;
-      break;
-
-    case e_rrsel:
-      /* RR:  R with rounding of the addend to nearest 8k.
-	 We need to return a value such that 2048 * LR'x + RR'x == x
-	 ie. RR'x = s+a - (s + (((a + 0x1000) & -0x2000) & -0x800))
-	 .	  = s+a - ((s & -0x800) + ((a + 0x1000) & -0x2000))
-	 .	  = (s & 0x7ff) + a - ((a + 0x1000) & -0x2000)  */
-      value = (sym_val & 0x7ff) + (((addend & 0x1fff) ^ 0x1000) - 0x1000);
-      break;
-
-    default:
-      abort();
-    }
-  return value;
-}
-
-/* Insert VALUE into INSN using R_FORMAT to determine exactly what
-   bits to change.  */
-
-static inline int
-hppa_rebuild_insn (insn, value, r_format)
-     int insn;
-     int value;
-     int r_format;
-{
-  switch (r_format)
-    {
-    case 11:
-      return (insn & ~ 0x7ff) | low_sign_unext (value, 11);
-
-    case 12:
-      return (insn & ~ 0x1ffd) | re_assemble_12 (value);
-
-
-    case 10:
-      return (insn & ~ 0x3ff1) | re_assemble_14 (value & -8);
-
-    case -11:
-      return (insn & ~ 0x3ff9) | re_assemble_14 (value & -4);
-
-    case 14:
-      return (insn & ~ 0x3fff) | re_assemble_14 (value);
-
-
-    case -10:
-      return (insn & ~ 0xfff1) | re_assemble_16 (value & -8);
-
-    case -16:
-      return (insn & ~ 0xfff9) | re_assemble_16 (value & -4);
-
-    case 16:
-      return (insn & ~ 0xffff) | re_assemble_16 (value);
-
-
-    case 17:
-      return (insn & ~ 0x1f1ffd) | re_assemble_17 (value);
-
-    case 21:
-      return (insn & ~ 0x1fffff) | re_assemble_21 (value);
-
-    case 22:
-      return (insn & ~ 0x3ff1ffd) | re_assemble_22 (value);
-
-    case 32:
-      return value;
-
-    default:
-      abort ();
-    }
-  return insn;
-}
-
-/* ====================================================================
-
-   End of functions from GNU BFD. 
-
-   ==================================================================== */
-
-/* This is where we get the opportunity to create any extra dynamic
-   sections we might need.  In our case we do not need a GOT because
-   our code is not PIC, but we do need to create a stub section.
-
-   This is significantly less complex than what we do for shared
-   libraries because, obviously, modules are not shared.  Also we have
-   no issues related to symbol visibility, lazy linking, etc.
-   The kernels dp is fixed (at symbol data_start), and we can fix up any
-   DPREL refs in the module to use that same dp value.
-   All PCREL17F refs result in a stub with the following format:
-
-  	ldil L'func_addr,%r1
-        be,n R'func_addr(%sr4,%r1)
-
-  Note, all PCREL17F get a stub, regardless of whether they are
-  local or external.  With local ones, and external ones to other
-  modules, there is a good chance we could manage without the stub.
-  I'll leave that for a future optimisation.
- */
-
-#define LDIL_R1		0x20200000	/* ldil  L'XXX,%r1		*/
-#define BE_N_SR4_R1	0xe0202002	/* be,n  R'XXX(%sr4,%r1)	*/
-
-#define STUB_SIZE 8
-
-int
-arch_create_got(struct obj_file *f)
-{
-  hppa_file_t *hfile = (hppa_file_t *)f;
-  int i, n;
-  int stub_offset = 0;
-
-  /* Create stub section.
-   * XXX set flags, see obj_ia64.c
-   */
-  hfile->stub = obj_create_alloced_section(f, ".stub", STUB_SIZE, 0);
-
-  /* Actually this is a lot like check_relocs() in a BFD backend.  We
-     walk all sections and all their relocations and look for ones
-     that need special treatment. */
-  n = hfile->root.header.e_shnum;
-  for (i = 0; i < n; ++i)
-    {
-      struct obj_section *relsec, *symsec, *strsec;
-      Elf32_Rela *rel, *relend;
-      Elf32_Sym *symtab;
-      char const *strtab;
-
-      relsec = hfile->root.sections[i];
-      if (relsec->header.sh_type != SHT_RELA)
-	continue;
-
-      symsec = hfile->root.sections[relsec->header.sh_link];
-      strsec = hfile->root.sections[symsec->header.sh_link];
-
-      rel = (Elf32_Rela *)relsec->contents;
-      relend = rel + (relsec->header.sh_size / sizeof(Elf32_Rela));
-      symtab = (Elf32_Sym *)symsec->contents;
-      strtab = (char const *)strsec->contents;
-
-      for (; rel < relend; rel++)
-	{
-	  int need_stub = 0;
-
-	  switch (ELF32_R_TYPE(rel->r_info))
-	    {
-	    default:
-	      continue;
-
-	    case R_PARISC_PCREL17F:
-	      need_stub = 1;
-	      break;
-	    }
-
-	  if (need_stub)
-	    {
-	      Elf32_Sym *extsym;
-	      hppa_symbol_t *hsym;
-	      char const *name;
-	      int local;
-	      unsigned long symndx;
-
-	      symndx = ELF32_R_SYM(rel->r_info);
-	      extsym = symtab + symndx;
-	      if (ELF32_ST_BIND(extsym->st_info) == STB_LOCAL)
-		hsym = (hppa_symbol_t *) f->local_symtab[symndx];
-	      else
-		{
-		  if (extsym->st_name)
-		    name = strtab + extsym->st_name;
-		  else
-		    name = f->sections[extsym->st_shndx]->name;
-		  hsym = (hppa_symbol_t *)obj_find_symbol(f, name);
-		}
-	      local = hsym->root.secidx <= SHN_HIRESERVE;
-
-	      if (need_stub)
-		{
-		  hppa_stub_t *stub;
-
-		  if (hsym->stub == NULL)
-		    {
-		      stub = (hppa_stub_t *) xmalloc(sizeof(hppa_stub_t));
-		      stub->offset = stub_offset;
-		      stub->reloc_done = 0;
-		      hsym->stub = stub;
-		      stub_offset += STUB_SIZE;
-		      need_stub = 0;
-		    }
-		}
-	    }
-        }
-    }
-  if (stub_offset)
-    {
-      hfile->stub->contents = xmalloc(stub_offset);
-      hfile->stub->header.sh_size = stub_offset;
-    }
-  return 1;
-}
-
-
-enum obj_reloc
-arch_apply_relocation(struct obj_file *f,
-		      struct obj_section *targsec,
-		      struct obj_section *symsec,
-		      struct obj_symbol *sym,
-		      Elf32_Rela *rel,
-		      Elf32_Addr v)
-{
-  hppa_file_t *hfile = (hppa_file_t *) f;
-  hppa_symbol_t *hsym  = (hppa_symbol_t *) sym;
-
-  Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
-  Elf32_Addr dot = (targsec->header.sh_addr + rel->r_offset) & ~0x03;
-  Elf32_Addr dp = hfile->dp;
-  Elf32_Word r_info = ELF32_R_TYPE(rel->r_info);
-
-  enum obj_reloc ret = obj_reloc_ok;
-  enum hppa_fsel fsel = e_fsel;	/* Avoid compiler warning */
-  unsigned int r_format;
-
-  /* Fix up the value, and determine whether we can handle this
-     relocation. */
-  switch (r_info)
-  {
-  case R_PARISC_PLABEL32:
-  case R_PARISC_DIR32:
-  case R_PARISC_DIR21L:
-  case R_PARISC_DIR14R:
-    /* Easy. */
-    break;
-
-  case R_PARISC_DPREL21L:
-  case R_PARISC_DPREL14R:
-    v -= dp;
-    break;
-
-  case R_PARISC_PCREL17F:
-    /* Find an import stub. */
-    assert(hsym->stub != NULL);
-    assert(hfile->stub != NULL);
-    /* XXX Optimise.  We may not need a stub for short branches */
-    if (!hsym->stub->reloc_done) {
-      /* Need to create the .stub entry */
-      Elf32_Addr *pstub, stubv;
-
-      pstub = (Elf32_Addr *)(hfile->stub->contents + hsym->stub->offset);
-      pstub[0] = LDIL_R1;
-      pstub[1] = BE_N_SR4_R1;
-      stubv = hppa_field_adjust(v, rel->r_addend, e_lrsel);
-      pstub[0] = hppa_rebuild_insn(pstub[0], stubv, 21);
-      stubv = hppa_field_adjust(v, rel->r_addend, e_rrsel);
-      stubv >>= 2;	/* Branch; divide by 4 */
-      pstub[1] = hppa_rebuild_insn(pstub[1], stubv, 17);
-      hsym->stub->reloc_done = 1;
-    }
-    v = hsym->stub->offset + hfile->stub->header.sh_addr;
-    break;
-
-  default:
-    return obj_reloc_unhandled;
-  }
-
-  /* Find the field selector. */
-  switch (r_info)
-    {
-    case R_PARISC_DIR32:
-    case R_PARISC_PLABEL32:
-    case R_PARISC_PCREL17F:
-      fsel = e_fsel;
-      break;
-	
-    case R_PARISC_DPREL21L:
-    case R_PARISC_DIR21L:
-      fsel = e_lrsel;
-      break;
-
-    case R_PARISC_DPREL14R:
-    case R_PARISC_DIR14R:
-      fsel = e_rrsel;
-      break;
-    }
-
-  v = hppa_field_adjust(v, rel->r_addend, fsel);
-
-  switch (r_info)
-    {
-    case R_PARISC_PCREL17F:
-    case R_PARISC_PCREL17R:
-    case R_PARISC_PCREL22F:
-      v = v - dot - 8;
-    case R_PARISC_DIR17F:
-    case R_PARISC_DIR17R:
-      /* This is a branch.  Divide the offset by four. */
-      v >>= 2;
-      break;
-    default:
-      break;
-    }
-
-  /* Find the format. */
-  switch (r_info)
-    {
-    case R_PARISC_DIR32:
-    case R_PARISC_PLABEL32:
-      r_format = 32;
-      break;
-
-    case R_PARISC_DPREL21L:
-    case R_PARISC_DIR21L:
-      r_format = 21;
-      break;
-
-    case R_PARISC_PCREL17F:
-      r_format = 17;
-      break;
-	
-    case R_PARISC_DPREL14R:
-    case R_PARISC_DIR14R:
-      r_format = 14;
-      break;
-
-    default:
-      abort();
-    }
-
-  *loc = hppa_rebuild_insn(*loc, v, r_format);
-
-  return ret;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *f, struct obj_section *sec)
-{
-  struct module_symbol *s;
-  int i;
-  hppa_file_t *hfile = (hppa_file_t *)f;
-
-  /* Initialise dp to the kernels dp (symbol data_start)
-   */
-  for (i = 0, s = ksyms; i < nksyms; i++, s++)
-    if (!strcmp((char *)s->name, "data_start"))
-      break;
-  if (i >= nksyms) {
-    error("Cannot initialise dp, 'data_start' not found\n");
-    return 1;
-  }
-  hfile->dp = s->value;
-  
-  return 0;
-}
-
diff --git a/mdk-stage1/insmod-modutils/obj/obj_hppa64.c b/mdk-stage1/insmod-modutils/obj/obj_hppa64.c
deleted file mode 100644
index fe32911ff..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_hppa64.c
+++ /dev/null
@@ -1,686 +0,0 @@
-/*
- * hppa parisc64 specific support for Elf loading and relocation.
- * Copyright 2000 Richard Hirst <rhirst@linuxcare.com>, Linuxcare Inc.
- *
- * Based on ia64 specific support which was
- *   Copyright 2000 Mike Stephens <mike.stephens@intel.com>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <assert.h>
-#include <stdlib.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-#ifndef TRUE
-#define TRUE  ~FALSE
-#endif
-
-/*======================================================================*/
-
-typedef struct _hppa64_opd_t
-{
-    int offset;
-    int reloc_done;
-} hppa64_opd_t;
-
-typedef struct _hppa64_stub_t
-{
-    struct _hppa64_stub_t *next;
-    Elf64_Addr addend;
-    int offset;
-    int reloc_done;
-} hppa64_stub_t;
-
-typedef struct _hppa64_got_t
-{
-    struct _hppa64_got_t *next;
-    Elf64_Addr addend;
-    int offset;
-    int reloc_done;
-} hppa64_got_t;
-
-typedef struct _hppa64_symbol_t
-{
-    struct obj_symbol root;
-    hppa64_got_t *gotent;
-    hppa64_opd_t *opdent;
-    hppa64_stub_t *stubent;
-} hppa64_symbol_t;
-
-typedef struct _hppa64_file_t
-{
-    struct obj_file root;
-    struct obj_section *got;
-    struct obj_section *opd;
-    struct obj_section *stub;
-    Elf64_Addr gp;
-    Elf64_Addr text;
-    Elf64_Addr data;
-    Elf64_Addr bss;
-} hppa64_file_t;
-
-/*
- * XXX This stub assumes it can reach the .got entry with a +/- 8K offset
- * from dp.  Perhaps we should use a .plt for these entries to give a
- * greater chance of that being true.
- *
- *     53 7b 00 00     ldd 0(dp),dp
- *     			R_PARISC_LTOFF14R <.got entry offset from dp>
- *     53 61 00 20     ldd 10(dp),r1
- *     e8 20 d0 00     bve (r1)
- *     53 7b 00 30     ldd 18(dp),dp
- *
- * We need a different stub for millicode calls, which doesn't screw
- * dp:
- *
- *     53 61 00 00     ldd 0(dp),r1
- *     			R_PARISC_LTOFF14R <.got entry offset from dp>
- *     50 21 00 20     ldd 10(r1),r1
- *     e8 20 d0 00     bve (r1)
- *     08 00 02 40     nop
- *
- */
-
-/* NOTE: to keep the code cleaner we make all stubs the same size.
- */
-
-#define SIZEOF_STUB	16
-
-unsigned char hppa64_stub_extern[] =
-{
-       0x53, 0x7b, 0x00, 0x00,
-       0x53, 0x61, 0x00, 0x20,
-       0xe8, 0x20, 0xd0, 0x00,
-       0x53, 0x7b, 0x00, 0x30,
-};
-
-unsigned char hppa64_stub_millicode[] =
-{
-       0x53, 0x61, 0x00, 0x00,
-       0x50, 0x21, 0x00, 0x20,
-       0xe8, 0x20, 0xd0, 0x00,
-       0x08, 0x00, 0x02, 0x40,
-};
-
-/*======================================================================*/
-
-enum obj_reloc
-patch_14r(Elf64_Xword v64, Elf64_Word *p)
-{
-	Elf64_Word i = *p;
-	Elf64_Word v = (Elf64_Word)v64;
-
-	if (v & 0x80000000)
-		v |= ~0x7ff;
-	else
-		v &= 0x7ff;
-	i &= ~ 0x3fff;
-	i |=    (v & 0x1fff) << 1 |
-		(v & 0x2000) >> 13;
-	*p = i;
-
-    return obj_reloc_ok;
-}
-
-enum obj_reloc
-patch_21l(Elf64_Xword v64, Elf64_Word *p)
-{
-	Elf64_Word i = *p;
-	Elf64_Word v = (Elf64_Word)v64;
-
-	v &= 0xfffff800;
-	if (v & 0x80000000)
-		v += 0x800;
-	i &= ~ 0x1fffff;
-	i |=    (v & 0x80000000) >> 31 |
-		(v & 0x7ff00000) >> 19 |
-		(v & 0x000c0000) >> 4 |
-		(v & 0x0003e000) << 3 |
-		(v & 0x00001800) << 1;
-	*p = i;
-
-    return obj_reloc_ok;
-}
-
-
-/* All 14 bits this time...  This is used to patch the .got offset in
- * a stub for PCREL22F.
- */
-
-enum obj_reloc
-patch_14r2(Elf64_Xword v64, Elf64_Word *p)
-{
-	Elf64_Word i = *p;
-	Elf64_Word v = (Elf64_Word)v64;
-
-	if ((Elf64_Sxword)v64 > 0x1fffL ||
-			(Elf64_Sxword)v64 < -0x2000L)
-		return obj_reloc_overflow;
-	i &= ~ 0x3fff;
-	i |=    (v & 0x2000) >> 13 |
-		(v & 0x1fff) << 1;
-	*p = i;
-
-    return obj_reloc_ok;
-}
-
-
-enum obj_reloc
-patch_22f(Elf64_Xword v64, Elf64_Word *p)
-{
-	Elf64_Word i = *p;
-	Elf64_Word v = (Elf64_Word)v64;
-
-	if ((Elf64_Sxword)v64 > 0x800000-1 ||
-	    (Elf64_Sxword)v64 < -0x800000)
-		return obj_reloc_overflow;
-
-	i &= ~ 0x03ff1ffd;
-	i |=    (v & 0x00800000) >> 23 |
-		(v & 0x007c0000) << 3 |
-		(v & 0x0003e000) << 3 |
-		(v & 0x00001000) >> 10 |
-		(v & 0x00000ffc) << 1;
-	*p = i;
-
-    return obj_reloc_ok;
-}
-
-
-struct obj_section *
-obj_hppa64_create_alloced_section (struct obj_file *f, const char *name,
-    unsigned long align, unsigned long size, unsigned long sh_flags)
-{
-    int newidx = f->header.e_shnum++;
-    struct obj_section *sec;
-
-    f->sections = xrealloc(f->sections, (newidx+1) * sizeof(sec));
-    f->sections[newidx] = sec = arch_new_section();
-
-    memset(sec, 0, sizeof(*sec));
-    sec->header.sh_type = SHT_PROGBITS;
-    sec->header.sh_flags = sh_flags;
-    sec->header.sh_size = size;
-    sec->header.sh_addralign = align;
-    sec->name = name;
-    sec->idx = newidx;
-    if (size)
-	sec->contents = xmalloc(size);
-
-    obj_insert_section_load_order(f, sec);
-
-    return sec;
-}
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-    hppa64_file_t *f;
-    f = xmalloc(sizeof(*f));
-    f->got = NULL;
-    f->opd = NULL;
-    f->stub = NULL;
-    return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-    return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-    hppa64_symbol_t *sym;
-    sym = xmalloc(sizeof(*sym));
-    sym->gotent = NULL;
-    sym->opdent = NULL;
-    sym->stubent = NULL;
-    return &sym->root;
-}
-
-/* This may not be needed, but does no harm (copied from ia64).
- */
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    switch (sec->header.sh_type)
-    {
-    case SHT_PARISC_EXT :
-	sec->contents = NULL;
-	break;
-
-    case SHT_PARISC_UNWIND :
-	if (sec->header.sh_size > 0)
-	{
-	    sec->contents = xmalloc(sec->header.sh_size);
-	    gzf_lseek(fp, sec->header.sh_offset, SEEK_SET);
-	    if (gzf_read(fp, sec->contents, sec->header.sh_size) != sec->header.sh_size)
-	    {
-		error("error reading ELF section data: %m");
-		return -1;
-	    }
-	}
-	else
-	    sec->contents = NULL;
-	break;
-    default:
-      error("Unknown section header type: %08x", sec->header.sh_type);
-      return -1;
-    }
-    return 0;
-}
-
-int
-arch_create_got(struct obj_file *f)
-{
-    hppa64_file_t *hfile = (hppa64_file_t *)f;
-    int i;
-    int n;
-    int got_offset = 0;
-    int opd_offset = 64;
-    int stub_offset = 0;
-
-    n = hfile->root.header.e_shnum;
-    for (i = 0; i < n; ++i)
-    {
-	struct obj_section *relsec, *symsec, *strsec;
-	Elf64_Rela *rel, *relend;
-	Elf64_Sym *symtab;
-	const char *strtab;
-
-	relsec = hfile->root.sections[i];
-	if (relsec->header.sh_type != SHT_RELA)
-	    continue;
-
-	symsec = hfile->root.sections[relsec->header.sh_link];
-	strsec = hfile->root.sections[symsec->header.sh_link];
-
-	rel = (Elf64_Rela *)relsec->contents;
-	relend = rel + (relsec->header.sh_size / sizeof(Elf64_Rela));
-	symtab = (Elf64_Sym *)symsec->contents;
-	strtab = (const char *)strsec->contents;
-
-	for (; rel < relend; ++rel)
-	{
-	    int need_got = FALSE;
-	    int need_opd = FALSE;
-	    int need_stub = FALSE;
-
-	    switch (ELF64_R_TYPE(rel->r_info))
-	    {
-	    default:
-		{
-		    unsigned r_info = ELF64_R_TYPE(rel->r_info);
-		    printf("r_info 0x%x not handled\n", r_info);
-		}
-		continue;
-	    case R_PARISC_LTOFF14R:
-	    case R_PARISC_LTOFF21L:
-	        /* These are simple indirect references to symbols through the
-                 * DLT.  We need to create a DLT entry for any symbols which
-                 * appears in a DLTIND relocation.
-		 */
-		need_got = TRUE;
-		break;
-	    case R_PARISC_PCREL22F:
-		/* These are function calls.  Depending on their precise
-		 * target we may need to make a stub for them.  The stub
-		 * uses the dlt, so we need to create dlt entries for
-		 * these symbols too.
-		 */
-		need_got = TRUE;
-		need_stub = TRUE;
-		break;
-	    case R_PARISC_DIR64:
-		break;
-	    case R_PARISC_FPTR64:
-		/* This is a simple OPD entry (only created for local symbols,
-		 * see below).
-		 */
-		need_opd = TRUE;
-		break;
-	    }
-
-	    if (need_got || need_opd || need_stub)
-	    {
-		Elf64_Sym     *extsym;
-		hppa64_symbol_t *isym;
-		const char    *name;
-		int            local;
-		unsigned long  symndx;
-
-		symndx = ELF64_R_SYM(rel->r_info);
-		extsym = &symtab[symndx];
-		if (ELF64_ST_BIND(extsym->st_info) == STB_LOCAL)
-		{
-		    isym = (hppa64_symbol_t *) f->local_symtab[symndx];
-		}
-		else
-		{
-		    if (extsym->st_name)
-			name = strtab + extsym->st_name;
-		    else
-			name = f->sections[extsym->st_shndx]->name;
-		    isym = (hppa64_symbol_t *)obj_find_symbol(f, name);
-		}
-		local = isym->root.secidx <= SHN_HIRESERVE;
-
-		if (need_stub)
-		{
-		    hppa64_stub_t *stub;
-
-		    for (stub = isym->stubent; stub != NULL; stub = stub->next)
-			if (stub->addend == rel->r_addend)
-			    break;
-		    if (stub == NULL)
-		    {
-			stub = (hppa64_stub_t *) xmalloc(sizeof(hppa64_stub_t));
-			stub->next = isym->stubent;
-			stub->addend = rel->r_addend;
-			stub->offset = stub_offset;
-			stub->reloc_done = FALSE;
-			isym->stubent = stub;
-			{
-			    stub_offset += SIZEOF_STUB;
-			}
-			need_stub = FALSE;
-		    }
-		}
-		if (need_got)
-		{
-		    hppa64_got_t *got;
-
-		    for (got = isym->gotent; got != NULL; got = got->next)
-			if (got->addend == rel->r_addend)
-			    break;
-		    if (got == NULL)
-		    {
-			got = (hppa64_got_t *) xmalloc(sizeof(hppa64_got_t));
-			got->next = isym->gotent;
-			got->addend = rel->r_addend;
-			got->offset = got_offset;
-			got->reloc_done = FALSE;
-			isym->gotent = got;
-			got_offset += 8;
-			need_got = FALSE;
-		    }
-		}
-		if (need_opd && local)
-		{
-		    hppa64_opd_t *opd;
-
-		    if (isym->opdent == NULL)
-		    {
-			opd = (hppa64_opd_t *) xmalloc(sizeof(hppa64_opd_t));
-			opd->offset = opd_offset;
-			opd->reloc_done = FALSE;
-			isym->opdent = opd;
-			opd_offset += 32;
-			need_opd = FALSE;
-		    }
-		}
-	    }
-	}
-    }
-
-    hfile->got = obj_hppa64_create_alloced_section(f, ".got", 8, got_offset,
-	(SHF_ALLOC | SHF_WRITE | SHF_PARISC_SHORT));
-    assert(hfile->got != NULL);
-
-    hfile->opd = obj_hppa64_create_alloced_section(f, ".opd", 16, opd_offset,
-	(SHF_ALLOC | SHF_WRITE | SHF_PARISC_SHORT));
-    assert(hfile->opd != NULL);
-
-    if (stub_offset > 0)
-    {
-	hfile->stub = obj_hppa64_create_alloced_section(f, ".stub", 16,
-	    stub_offset, (SHF_ALLOC | SHF_EXECINSTR | SHF_PARISC_SHORT));
-	assert(hfile->stub != NULL);
-    }
-
-    return 1;
-}
-
-
-/* This is a small simple version which seems to work fine.  ia64 has
- * a much more complex algorithm.  We point dp at the end of the .got,
- * which is the start of the .opd.
- */
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf64_Addr base)
-{
-    hppa64_file_t *hfile = (hppa64_file_t *)f;
-    int        n = f->header.e_shnum;
-    int        i;
-
-    f->baseaddr = base;
-    for (i = 0; i < n; ++i)
-	f->sections[i]->header.sh_addr += base;
-
-    /* Pick a sensible value for gp */
-    hfile->gp = hfile->got->header.sh_addr + hfile->got->header.sh_size;
-
-    return 1;
-}
-
-
-enum obj_reloc
-arch_apply_relocation(struct obj_file *f,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf64_Rela *rel,
-		       Elf64_Addr v)
-{
-    hppa64_file_t *hfile = (hppa64_file_t *) f;
-    hppa64_symbol_t *isym  = (hppa64_symbol_t *) sym;
-
-    Elf64_Word  *loc = (Elf64_Word *)(targsec->contents + rel->r_offset);
-    Elf64_Addr  dot = (targsec->header.sh_addr + rel->r_offset) & ~0x03;
-
-    Elf64_Addr  got = hfile->got->header.sh_addr;
-    Elf64_Addr  gp = hfile->gp;
-
-    Elf64_Xword r_info = ELF64_R_TYPE(rel->r_info);
-
-    enum obj_reloc ret = obj_reloc_ok;
-
-    switch (r_info)
-    {
-    default:
-	ret = obj_reloc_unhandled;
-	break;
-    case R_PARISC_LTOFF14R:
-    case R_PARISC_LTOFF21L:
-	{
-	    hppa64_got_t *ge;
-
-	    assert(isym != NULL);
-	    for (ge = isym->gotent; ge != NULL && ge->addend != rel->r_addend; )
-		ge = ge->next;
-	    assert(ge != NULL);
-	    if (!ge->reloc_done)
-	    {
-		ge->reloc_done = TRUE;
-		*(Elf64_Addr *)(hfile->got->contents + ge->offset) = v;
-	    }
-	    v = got + ge->offset - gp;
-	    if (r_info == R_PARISC_LTOFF14R)
-		ret = patch_14r(v, loc);
-	    else
-		ret = patch_21l(v, loc);
-	}
-	break;
-    case R_PARISC_PCREL22F:
-	{
-	    hppa64_got_t *ge;
-
-	    assert(isym != NULL);
-	    for (ge = isym->gotent; ge != NULL && ge->addend != rel->r_addend; )
-		ge = ge->next;
-	    assert(ge != NULL);
-	    if (!ge->reloc_done)
-	    {
-		ge->reloc_done = TRUE;
-		*(Elf64_Addr *)(hfile->got->contents + ge->offset) = v;
-	    }
-	    if ((isym->root.secidx > SHN_HIRESERVE) ||
-		((Elf64_Sxword) (v - dot - 8) > 0x800000-1) ||
-		((Elf64_Sxword) (v - dot - 8) < -0x800000))
-	    {
-		hppa64_stub_t *se;
-
-		for (se = isym->stubent; se != NULL && se->addend != rel->r_addend; )
-		    se = se->next;
-		assert(se != NULL);
-		if (!se->reloc_done)
-		{
-		    /* This requires that we can get from dp to the entry in +/- 8K,
-		     * or +/- 1000 entries.  patch_14r2() will check that.
-		     * Only need these dlt entries for calls to external/far
-		     * functions, so should probably put them in a seperate section
-		     * before dlt and point dp at the section.  Change to that
-		     * scheme if we hit problems with big modules.
-		     */
-		    unsigned char *stub;
-
-		    if (!strncmp(isym->root.name, "$$", 2))
-			stub = hppa64_stub_millicode;
-		    else
-			stub = hppa64_stub_extern;
-		    se->reloc_done = TRUE;
-		    memcpy((Elf64_Addr *)(hfile->stub->contents + se->offset),
-	    			stub, SIZEOF_STUB);
-		    v = (Elf64_Addr)(hfile->got->header.sh_addr + ge->offset) - gp;
-		    ret = patch_14r2(v, (Elf64_Word *)(hfile->stub->contents + se->offset));
-		}
-		v = hfile->stub->header.sh_addr + se->offset;
-	    }
-	    v = v - dot - 8;
-	    if (ret == obj_reloc_ok)
-	        ret = patch_22f(v, loc);
-	}
-	break;
-    case R_PARISC_DIR64:
-	{
-	    loc[0] = v >> 32;
-	    loc[1] = v;
-	}
-	break;
-    case R_PARISC_FPTR64:
-	{
-	    assert(isym != NULL);
-	    if (isym->root.secidx <= SHN_HIRESERVE) /* local */
-	    {
-		assert(isym->opdent != NULL);
-		if (!isym->opdent->reloc_done)
-		{
-		    isym->opdent->reloc_done = TRUE;
-		    *(Elf64_Addr *)(hfile->opd->contents + isym->opdent->offset + 16) = v;
-		    *(Elf64_Addr *)(hfile->opd->contents + isym->opdent->offset + 24) = gp;
-		}
-		v = hfile->opd->header.sh_addr + isym->opdent->offset;
-	    }
-	    loc[0] = v >> 32;
-	    loc[1] = v;
-	}
-	break;
-    }
-    return ret;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-    hppa64_file_t *hfile = (hppa64_file_t *)f;
-    Elf64_Addr *opd = (Elf64_Addr *)(hfile->opd->contents);
-
-    opd[0] = 0;
-    opd[1] = 0;
-    if ((opd[2] = mod->init) != 0)
-    {
-	opd[3] = hfile->gp;
-	mod->init = hfile->opd->header.sh_addr;
-    }
-
-    opd[4] = 0;
-    opd[5] = 0;
-    if ((opd[6] = mod->cleanup) != 0)
-    {
-	opd[7] = hfile->gp;
-	mod->cleanup = hfile->opd->header.sh_addr + 32;
-    }
-
-    return 1;
-}
-
-/* XXX Is this relevant to parisc? */
-
-int
-arch_archdata (struct obj_file *f, struct obj_section *archdata_sec)
-{
-    hppa64_file_t *hfile = (hppa64_file_t *)f;
-    struct archdata {
-	unsigned tgt_long unw_table;
-	unsigned tgt_long segment_base;
-	unsigned tgt_long unw_start;
-	unsigned tgt_long unw_end;
-	unsigned tgt_long gp;
-    } *ad;
-    int i;
-    struct obj_section *sec;
-
-    free(archdata_sec->contents);
-    archdata_sec->contents = xmalloc(sizeof(struct archdata));
-    memset(archdata_sec->contents, 0, sizeof(struct archdata));
-    archdata_sec->header.sh_size = sizeof(struct archdata);
-
-    ad = (struct archdata *)(archdata_sec->contents);
-    ad->gp = hfile->gp;
-    ad->unw_start = 0;
-    ad->unw_end = 0;
-    ad->unw_table = 0;
-    ad->segment_base = f->sections[1]->header.sh_addr;
-    for (i = 0; i < f->header.e_shnum; ++i)
-    {
-	sec = f->sections[i];
-	if (sec->header.sh_type == SHT_PARISC_UNWIND)
-	{
-	    ad->unw_start = sec->header.sh_addr;
-	    ad->unw_end = sec->header.sh_addr + sec->header.sh_size;
-	    break;
-	}
-    }
-
-    return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_i386.c b/mdk-stage1/insmod-modutils/obj/obj_i386.c
deleted file mode 100644
index 28df3448c..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_i386.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/* i386 specific support for Elf loading and relocation.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct i386_got_entry
-{
-  int offset;
-  unsigned offset_done : 1;
-  unsigned reloc_done : 1;
-};
-
-struct i386_file
-{
-  struct obj_file root;
-  struct obj_section *got;
-};
-
-struct i386_symbol
-{
-  struct obj_symbol root;
-  struct i386_got_entry gotent;
-};
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  struct i386_file *f;
-  f = xmalloc(sizeof(*f));
-  f->got = NULL;
-  return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  struct i386_symbol *sym;
-  sym = xmalloc(sizeof(*sym));
-  memset(&sym->gotent, 0, sizeof(sym->gotent));
-  return &sym->root;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *f,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf32_Rel *rel,
-		       Elf32_Addr v)
-{
-  struct i386_file *ifile = (struct i386_file *)f;
-  struct i386_symbol *isym  = (struct i386_symbol *)sym;
-
-  Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
-  Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-  Elf32_Addr got = ifile->got ? ifile->got->header.sh_addr : 0;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF32_R_TYPE(rel->r_info))
-    {
-    case R_386_NONE:
-      break;
-
-    case R_386_32:
-      *loc += v;
-      break;
-
-    case R_386_PLT32:
-    case R_386_PC32:
-      *loc += v - dot;
-      break;
-
-    case R_386_GLOB_DAT:
-    case R_386_JMP_SLOT:
-      *loc = v;
-      break;
-
-    case R_386_RELATIVE:
-      *loc += f->baseaddr;
-      break;
-
-    case R_386_GOTPC:
-      assert(got != 0);
-      *loc += got - dot;
-      break;
-
-    case R_386_GOT32:
-      assert(isym != NULL);
-      if (!isym->gotent.reloc_done)
-	{
-	  isym->gotent.reloc_done = 1;
-	  *(Elf32_Addr *)(ifile->got->contents + isym->gotent.offset) = v;
-	}
-      *loc += isym->gotent.offset;
-      break;
-
-    case R_386_GOTOFF:
-      assert(got != 0);
-      *loc += v - got;
-      break;
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
-  struct i386_file *ifile = (struct i386_file *)f;
-  int i, n, offset = 0, gotneeded = 0;
-
-  n = ifile->root.header.e_shnum;
-  for (i = 0; i < n; ++i)
-    {
-      struct obj_section *relsec, *symsec, *strsec;
-      Elf32_Rel *rel, *relend;
-      Elf32_Sym *symtab;
-      const char *strtab;
-
-      relsec = ifile->root.sections[i];
-      if (relsec->header.sh_type != SHT_REL)
-	continue;
-
-      symsec = ifile->root.sections[relsec->header.sh_link];
-      strsec = ifile->root.sections[symsec->header.sh_link];
-
-      rel = (Elf32_Rel *)relsec->contents;
-      relend = rel + (relsec->header.sh_size / sizeof(Elf32_Rel));
-      symtab = (Elf32_Sym *)symsec->contents;
-      strtab = (const char *)strsec->contents;
-
-      for (; rel < relend; ++rel)
-	{
-	  Elf32_Sym *extsym;
-	  struct i386_symbol *intsym;
-	  const char *name;
-
-	  switch (ELF32_R_TYPE(rel->r_info))
-	    {
-	    case R_386_GOTPC:
-	    case R_386_GOTOFF:
-	      gotneeded = 1;
-	    default:
-	      continue;
-
-	    case R_386_GOT32:
-	      break;
-	    }
-
-	  extsym = &symtab[ELF32_R_SYM(rel->r_info)];
-	  if (extsym->st_name)
-	    name = strtab + extsym->st_name;
-	  else
-	    name = f->sections[extsym->st_shndx]->name;
-	  intsym = (struct i386_symbol *)obj_find_symbol(&ifile->root, name);
-
-	  if (!intsym->gotent.offset_done)
-	    {
-	      intsym->gotent.offset_done = 1;
-	      intsym->gotent.offset = offset;
-	      offset += 4;
-	    }
-	}
-    }
-
-  if (offset > 0 || gotneeded)
-    ifile->got = obj_create_alloced_section(&ifile->root, ".got", 4, offset);
-
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_ia64.c b/mdk-stage1/insmod-modutils/obj/obj_ia64.c
deleted file mode 100644
index 4f92c5d27..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_ia64.c
+++ /dev/null
@@ -1,1065 +0,0 @@
-/*
- * ia64 specific support for Elf loading and relocation.
- * Copyright 2000 Mike Stephens <mike.stephens@intel.com>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <assert.h>
-#include <stdlib.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-#ifndef TRUE
-#define TRUE  ~FALSE
-#endif
-
-/*======================================================================*/
-
-typedef struct _ia64_opd_t
-{
-    int offset;
-    int reloc_done;
-} ia64_opd_t;
-
-typedef struct _ia64_plt_t
-{
-    struct _ia64_plt_t *next;
-    Elf64_Addr addend;
-    int text_offset;
-    int data_offset;
-    int reloc_done;
-} ia64_plt_t;
-
-typedef struct _ia64_got_t
-{
-    struct _ia64_got_t *next;
-    Elf64_Addr addend;
-    int offset;
-    int reloc_done;
-} ia64_got_t;
-
-typedef struct _ia64_symbol_t
-{
-    struct obj_symbol root;
-    ia64_got_t *gotent;
-    ia64_opd_t *opdent;
-    ia64_plt_t *pltent;
-} ia64_symbol_t;
-
-typedef struct _ia64_file_t
-{
-    struct obj_file root;
-    struct obj_section *got;
-    struct obj_section *opd;
-    struct obj_section *pltt;
-    struct obj_section *pltd;
-    Elf64_Addr gp;
-    Elf64_Addr text;
-    Elf64_Addr data;
-    Elf64_Addr bss;
-} ia64_file_t;
-
-/*
- * aa=gp rel address of the function descriptor in the .IA_64.pltoff section
- */
-unsigned char ia64_plt_local[] =
-{
-    0x0b, 0x78, 0x00, 0x02, 0x00, 0x24, /* [MMI] addl r15=aa,gp;;   */
-    0x00, 0x41, 0x3c, 0x30, 0x28, 0xc0, /*       ld8 r16=[r15],8    */
-    0x01, 0x08, 0x00, 0x84,             /*       mov r14=gp;;       */
-    0x11, 0x08, 0x00, 0x1e, 0x18, 0x10, /* [MIB] ld8 gp=[r15]       */
-    0x60, 0x80, 0x04, 0x80, 0x03, 0x00, /*       mov b6=r16         */
-    0x60, 0x00, 0x80, 0x00              /*       br.few b6;;        */
-};
-
-unsigned char ia64_plt_extern[] =
-{
-    0x0b, 0x80, 0x00, 0x02, 0x00, 0x24, /* [MMI] addl r16=aa,gp;;   */
-    0xf0, 0x00, 0x40, 0x30, 0x20, 0x00, /*       ld8 r15=[r16]      */
-    0x00, 0x00, 0x04, 0x00,             /*       nop.i 0x0;;        */
-    0x0b, 0x80, 0x20, 0x1e, 0x18, 0x14, /* [MMI] ld8 r16=[r15],8;;  */
-    0x10, 0x00, 0x3c, 0x30, 0x20, 0xc0, /*       ld8 gp=[r15]       */
-    0x00, 0x09, 0x00, 0x07,             /*       mov b6=r16;;       */
-    0x11, 0x00, 0x00, 0x00, 0x01, 0x00, /* [MIB] nop.m 0x0          */
-    0x00, 0x00, 0x00, 0x02, 0x00, 0x00, /*       nop.i 0x0          */
-    0x60, 0x00, 0x80, 0x00              /*       br.few b6;;        */
-};
-
-/*======================================================================*/
-
-/*
- * return the instruction at slot in bundle
- */
-Elf64_Xword
-obj_ia64_ins_extract_from_bundle(Elf64_Addr *bundle, Elf64_Xword slot)
-{
-    switch (slot)
-    {
-    case 0 :
-	return (*bundle >> 5) & 0x1ffffffffff;
-
-    case 1 :
-	return (((*bundle >> 46) & 0x3ffff) |
-	    (*(bundle + 1) << 18)) & 0x1ffffffffff;
-
-    case 2 :
-	return (*(bundle + 1) >> 23) & 0x1ffffffffff;
-
-    default:
-    }
-    return (-1);
-}
-
-/*
- * insert a instruction at slot in bundle
- */
-void
-obj_ia64_ins_insert_in_bundle(Elf64_Addr *bundle, Elf64_Xword slot, Elf64_Xword ins)
-{
-    Elf64_Xword i;
-    Elf64_Xword in = ins & 0x1ffffffffff;
-
-    switch (slot)
-    {
-    case 0 :
-	i = *bundle & 0xffffc0000000001f;
-       *bundle = i | (in << 5);
-	break;
-
-    case 1 :
-	i = *bundle & 0x00003fffffffffff;
-	*bundle = i | (in << 46);
-
-	++bundle;
-	i = *bundle & 0xffffffffff800000;
-	*bundle = i | (in >> 18);
-	break;
-
-    case 2 :
-	++bundle;
-	i = *bundle & 0x00000000007fffff;
-	*bundle = i | (in << 23);
-	break;
-    }
-}
-
-/*
- * add a immediate 14 value to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_imm14(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
-    Elf64_Xword ins;
-
-    ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
-    ins &= 0xffffffee07f01fff;
-    ins |= ((v & 0x2000) << 23) | ((v & 0x1f80) << 20) | ((v & 0x007f) << 13);
-    obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
-    if (((Elf64_Sxword) v > 8191) || ((Elf64_Sxword) v < -8192))
-	return obj_reloc_overflow;
-    return obj_reloc_ok;
-}
-
-/*
- * add a immediate 22 value to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_imm22(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
-    Elf64_Xword ins;
-
-    ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
-    ins &= 0xffffffe000301fff;
-    ins |= ((v & 0x200000) << 15) | ((v & 0x1f0000) << 6) |
-	   ((v & 0x00ff80) << 20) | ((v & 0x00007f) << 13);
-    obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
-    if (((Elf64_Sxword) v > 2097151) || ((Elf64_Sxword) v < -2097152))
-	return obj_reloc_overflow;
-    return obj_reloc_ok;
-}
-
-/*
- * add a immediate 21 value (form 1) to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_pcrel21b(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
-    Elf64_Xword ins;
-
-    ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
-    ins &= 0xffffffee00001fff;
-    ins |= ((v & 0x1000000) << 12) | ((v & 0x0fffff0) << 9);
-    obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
-    return obj_reloc_ok;
-}
-
-/*
- * add a immediate 21 value (form 2) to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_pcrel21m(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
-    Elf64_Xword ins;
-
-    ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
-    ins &= 0xffffffee000fe03f;
-    ins |= ((v & 0x1000000) << 12) | ((v & 0x0fff800) << 9) |
-	   ((v & 0x00007f0) << 2);
-    obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
-    return obj_reloc_ok;
-}
-
-/*
- * add a immediate 21 value (form 3) to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_pcrel21f(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
-    Elf64_Xword ins;
-
-    ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
-    ins &= 0xffffffeffc00003f;
-    ins |= ((v & 0x1000000) << 12) | ((v & 0x0fffff0) << 2);
-    obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
-    return obj_reloc_ok;
-}
-
-/*
- * add a immediate 64 value to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_imm64(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
-    Elf64_Xword ins;
-
-    assert(slot == 1);
-    ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
-    ins &= 0xffffffee000101ff;
-    ins |= ((v & 0x8000000000000000) >> 28) | ((v & 0x0000000000200000)) |
-	   ((v & 0x00000000001f0000) <<  6) | ((v & 0x000000000000ff80) << 20) |
-	   ((v & 0x000000000000007f) << 13);
-    obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
-    obj_ia64_ins_insert_in_bundle(bundle, ++slot, ((v & 0x7fffffffffc00000) >> 22));
-    return obj_reloc_ok;
-}
-
-/*
- * create a plt entry
- */
-enum obj_reloc
-obj_ia64_generate_plt(Elf64_Addr v,
-		       Elf64_Addr gp,
-		       ia64_file_t *ifile,
-		       ia64_symbol_t *isym,
-		       ia64_plt_t *pltent)
-{
-    *(Elf64_Addr *)(ifile->pltd->contents + pltent->data_offset) = v;
-    if (isym->root.secidx <= SHN_HIRESERVE)
-    {
-	/* local entry */
-	*(Elf64_Addr *)(ifile->pltd->contents + pltent->data_offset + 8) = gp;
-	memcpy((Elf64_Addr *)(ifile->pltt->contents + pltent->text_offset),
-	    ia64_plt_local, sizeof(ia64_plt_local));
-    }
-    else
-    {
-	/* external entry */
-	memcpy((Elf64_Addr *)(ifile->pltt->contents + pltent->text_offset),
-	    ia64_plt_extern, sizeof(ia64_plt_extern));
-    }
-    return obj_ia64_ins_imm22(
-	(ifile->pltd->header.sh_addr + pltent->data_offset - gp),
-	(Elf64_Addr *)(ifile->pltt->contents + pltent->text_offset), 0);
-}
-
-struct obj_section *
-obj_ia64_create_alloced_section (struct obj_file *f, const char *name,
-    unsigned long align, unsigned long size, unsigned long sh_flags)
-{
-    int newidx = f->header.e_shnum++;
-    struct obj_section *sec;
-
-    f->sections = xrealloc(f->sections, (newidx+1) * sizeof(sec));
-    f->sections[newidx] = sec = arch_new_section();
-
-    memset(sec, 0, sizeof(*sec));
-    sec->header.sh_type = SHT_PROGBITS;
-    sec->header.sh_flags = sh_flags;
-    sec->header.sh_size = size;
-    sec->header.sh_addralign = align;
-    sec->name = name;
-    sec->idx = newidx;
-    if (size)
-	sec->contents = xmalloc(size);
-
-    obj_insert_section_load_order(f, sec);
-
-    return sec;
-}
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-    ia64_file_t *f;
-    f = xmalloc(sizeof(*f));
-    f->got = NULL;
-    f->opd = NULL;
-    f->pltt = NULL;
-    f->pltd = NULL;
-    return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-    return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-    ia64_symbol_t *sym;
-    sym = xmalloc(sizeof(*sym));
-    sym->gotent = NULL;
-    sym->opdent = NULL;
-    sym->pltent = NULL;
-    return &sym->root;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    switch (sec->header.sh_type)
-    {
-    case SHT_IA_64_EXT :
-	sec->contents = NULL;
-	break;
-
-    case SHT_IA_64_UNWIND :
-	if (sec->header.sh_size > 0)
-	{
-	    sec->contents = xmalloc(sec->header.sh_size);
-	    gzf_lseek(fp, sec->header.sh_offset, SEEK_SET);
-	    if (gzf_read(fp, sec->contents, sec->header.sh_size) != sec->header.sh_size)
-	    {
-		error("error reading ELF section data: %m");
-		return -1;
-	    }
-	}
-	else
-	    sec->contents = NULL;
-	break;
-
-    default:
-      error("Unknown section header type: %08x", sec->header.sh_type);
-      return -1;
-    }
-    return 0;
-}
-
-int
-arch_create_got(struct obj_file *f)
-{
-    ia64_file_t *ifile = (ia64_file_t *)f;
-    int i;
-    int n;
-    int got_offset = 0;
-    int opd_offset = 32;
-    int plt_text_offset = 0;
-    int plt_data_offset = 0;
-
-    n = ifile->root.header.e_shnum;
-    for (i = 0; i < n; ++i)
-    {
-	struct obj_section *relsec, *symsec, *strsec;
-	Elf64_Rela *rel, *relend;
-	Elf64_Sym *symtab;
-	const char *strtab;
-
-	relsec = ifile->root.sections[i];
-	if (relsec->header.sh_type != SHT_RELA)
-	    continue;
-
-	symsec = ifile->root.sections[relsec->header.sh_link];
-	strsec = ifile->root.sections[symsec->header.sh_link];
-
-	rel = (Elf64_Rela *)relsec->contents;
-	relend = rel + (relsec->header.sh_size / sizeof(Elf64_Rela));
-	symtab = (Elf64_Sym *)symsec->contents;
-	strtab = (const char *)strsec->contents;
-
-	for (; rel < relend; ++rel)
-	{
-	    int need_got = FALSE;
-	    int need_opd = FALSE;
-	    int need_plt = FALSE;
-
-	    switch (ELF64_R_TYPE(rel->r_info))
-	    {
-	    default:
-		continue;
-
-	    case R_IA64_FPTR64I :       /* @fptr(sym + add), mov imm64 */
-	    case R_IA64_FPTR32LSB :     /* @fptr(sym + add), data4 LSB */
-	    case R_IA64_FPTR64LSB :     /* @fptr(sym + add), data8 LSB */
-		need_opd = TRUE;
-		break;
-
-	    case R_IA64_LTOFF22 :       /* @ltoff(sym + add), add imm22 */
-	    case R_IA64_LTOFF22X :
-	    case R_IA64_LTOFF64I :      /* @ltoff(sym + add), mov imm64 */
-		need_got = TRUE;
-		break;
-
-	    case R_IA64_LTOFF_FPTR22 :  /* @ltoff(@fptr(s+a)), imm22 */
-	    case R_IA64_LTOFF_FPTR64I : /* @ltoff(@fptr(s+a)), imm64 */
-	    case R_IA64_LTOFF_FPTR32LSB :
-	    case R_IA64_LTOFF_FPTR64LSB :
-		need_got = TRUE;
-		need_opd = TRUE;
-		break;
-
-	    case R_IA64_PLTOFF22 :      /* @pltoff(sym + add), add imm22 */
-	    case R_IA64_PLTOFF64I :     /* @pltoff(sym + add), mov imm64 */
-	    case R_IA64_PLTOFF64LSB :   /* @pltoff(sym + add), data8 LSB */
-
-	    case R_IA64_PCREL21B :      /* @pcrel(sym + add), ptb, call */
-	    case R_IA64_PCREL21M :      /* @pcrel(sym + add), chk.s */
-	    case R_IA64_PCREL21F :      /* @pcrel(sym + add), fchkf */
-		need_plt = TRUE;
-		break;
-	    }
-
-	    if (need_got || need_opd || need_plt)
-	    {
-		Elf64_Sym     *extsym;
-		ia64_symbol_t *isym;
-		const char    *name;
-		int            local;
-		unsigned long  symndx;
-
-		symndx = ELF64_R_SYM(rel->r_info);
-		extsym = &symtab[symndx];
-		if (ELF64_ST_BIND(extsym->st_info) == STB_LOCAL)
-		{
-		    isym = (ia64_symbol_t *) f->local_symtab[symndx];
-		}
-		else
-		{
-		    if (extsym->st_name)
-			name = strtab + extsym->st_name;
-		    else
-			name = f->sections[extsym->st_shndx]->name;
-		    isym = (ia64_symbol_t *)obj_find_symbol(f, name);
-		}
-		local = isym->root.secidx <= SHN_HIRESERVE;
-
-		if (need_plt)
-		{
-		    ia64_plt_t *plt;
-
-		    for (plt = isym->pltent; plt != NULL; plt = plt->next)
-			if (plt->addend == rel->r_addend)
-			    break;
-		    if (plt == NULL)
-		    {
-			plt = (ia64_plt_t *) xmalloc(sizeof(ia64_plt_t));
-			plt->next = isym->pltent;
-			plt->addend = rel->r_addend;
-			plt->text_offset = plt_text_offset;
-			plt->data_offset = plt_data_offset;
-			plt->reloc_done = FALSE;
-			isym->pltent = plt;
-			if (local)
-			{
-			    plt_text_offset += sizeof(ia64_plt_local);
-			    plt_data_offset += 16;
-			}
-			else
-			{
-			    plt_text_offset += sizeof(ia64_plt_extern);
-			    plt_data_offset += 8;
-			}
-			need_plt = FALSE;
-		    }
-		}
-		if (need_got)
-		{
-		    ia64_got_t *got;
-
-		    for (got = isym->gotent; got != NULL; got = got->next)
-			if (got->addend == rel->r_addend)
-			    break;
-		    if (got == NULL)
-		    {
-			got = (ia64_got_t *) xmalloc(sizeof(ia64_got_t));
-			got->next = isym->gotent;
-			got->addend = rel->r_addend;
-			got->offset = got_offset;
-			got->reloc_done = FALSE;
-			isym->gotent = got;
-			got_offset += 8;
-			need_got = FALSE;
-		    }
-		}
-		if (need_opd && local)
-		{
-		    ia64_opd_t *opd;
-
-		    if (isym->opdent == NULL)
-		    {
-			opd = (ia64_opd_t *) xmalloc(sizeof(ia64_opd_t));
-			opd->offset = opd_offset;
-			opd->reloc_done = FALSE;
-			isym->opdent = opd;
-			opd_offset += 16;
-			need_opd = FALSE;
-		    }
-		}
-	    }
-	}
-    }
-
-    ifile->got = obj_ia64_create_alloced_section(f, ".got", 8, got_offset,
-	(SHF_ALLOC | SHF_WRITE | SHF_IA_64_SHORT));
-    assert(ifile->got != NULL);
-
-    ifile->opd = obj_ia64_create_alloced_section(f, ".opd", 16, opd_offset,
-	(SHF_ALLOC | SHF_WRITE | SHF_IA_64_SHORT));
-    assert(ifile->opd != NULL);
-
-    if (plt_text_offset > 0)
-    {
-	ifile->pltt = obj_ia64_create_alloced_section(f, ".plt", 16,
-	    plt_text_offset, (SHF_ALLOC | SHF_EXECINSTR | SHF_IA_64_SHORT));
-	ifile->pltd = obj_ia64_create_alloced_section(f, ".IA_64.pltoff",
-	    16, plt_data_offset, (SHF_ALLOC | SHF_WRITE | SHF_IA_64_SHORT));
-	assert(ifile->pltt != NULL);
-	assert(ifile->pltd != NULL);
-    }
-
-    return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf64_Addr base)
-{
-    ia64_file_t *ifile = (ia64_file_t *)f;
-    Elf64_Addr min_addr = (Elf64_Addr) -1;
-    Elf64_Addr max_addr = 0;
-    Elf64_Addr min_short_addr = (Elf64_Addr) -1;
-    Elf64_Addr max_short_addr = 0;
-    Elf64_Addr gp;
-    Elf64_Addr text = (Elf64_Addr) -1;
-    Elf64_Addr data = (Elf64_Addr) -1;
-    Elf64_Addr bss = (Elf64_Addr) -1;
-    int        n = f->header.e_shnum;
-    int        i;
-
-    /*
-     * Finalize the addresses of the sections, find the min and max
-     * address of all sections marked short, and collect min and max
-     * address of any type, for use in selecting a nice gp.
-     *
-     * The algorithm used for selecting set the GP value was taken from
-     * the ld/bfd code contributed by David Mosberger-Tang <davidm@hpl.hp.com>
-     */
-    f->baseaddr = base;
-    for (i = 0; i < n; ++i)
-    {
-	Elf64_Shdr *header = &f->sections[i]->header;
-	Elf64_Addr lo;
-	Elf64_Addr hi;
-
-	header->sh_addr += base;
-	if (header->sh_flags & SHF_ALLOC)
-	{
-	    lo = header->sh_addr;
-	    hi = header->sh_addr + header->sh_size;
-	    if (hi < lo)
-		hi = (Elf64_Addr) -1;
-
-	    if (min_addr > lo)
-		min_addr = lo;
-	    if (max_addr < hi)
-		max_addr = hi;
-	    if (header->sh_flags & SHF_IA_64_SHORT)
-	    {
-		if (min_short_addr > lo)
-		    min_short_addr = lo;
-		if (max_short_addr < hi)
-		    max_short_addr = hi;
-	    }
-	    if ((header->sh_type & SHT_NOBITS) && (lo < bss))
-		bss = lo;
-	    else if ((header->sh_flags & SHF_EXECINSTR) && (lo < text))
-		text = lo;
-	    else if (lo < data)
-		data = lo;
-	}
-    }
-    /* Pick a sensible value for gp */
-
-    /* Start with just the address of the .got */
-    gp = ifile->got->header.sh_addr;
-
-    /*
-     * If it is possible to address the entire image, but we
-     * don't with the choice above, adjust.
-     */
-    if ((max_addr - min_addr < 0x400000) && (max_addr - gp <= 0x200000) &&
-	(gp - min_addr > 0x200000))
-    {
-	gp = min_addr + 0x200000;
-    }
-    else if (max_short_addr != 0)
-    {
-	/* If we don't cover all the short data, adjust */
-	if (max_short_addr - gp >= 0x200000)
-	    gp = min_short_addr + 0x200000;
-
-	/* If we're addressing stuff past the end, adjust back */
-	if (gp > max_addr)
-	    gp = max_addr - 0x200000 + 8;
-    }
-
-    /*
-     * Validate whether all SHF_IA_64_SHORT sections are within
-     * range of the chosen GP.
-     */
-    if (max_short_addr != 0)
-    {
-	if (max_short_addr - min_short_addr >= 0x400000)
-	{
-	    error("short data segment overflowed (0x%lx >= 0x400000)",
-		(unsigned long)(max_short_addr - min_short_addr));
-	    return 0;
-	}
-	else if (((gp > min_short_addr) && (gp - min_short_addr > 0x200000)) ||
-	    ((gp < max_short_addr) && (max_short_addr - gp >= 0x200000)))
-	{
-	    error("GP does not cover short data segment");
-	    return 0;
-	}
-    }
-    ifile->gp = gp;
-    ifile->text = text;
-    ifile->data = data;
-    ifile->bss = bss;
-    return 1;
-}
-
-/* Targets can be unaligned, use memcpy instead of assignment */
-#define COPY_64LSB(loc, v) \
-    do { \
-    Elf64_Xword reloc = (v); \
-    memcpy((void *)(loc), &reloc, 8); \
-    } while(0)
-#define COPY_32LSB(loc, v) \
-    do { \
-    Elf32_Xword reloc = (v); \
-    memcpy((void *)(loc), &reloc, 4); \
-    if ((v) != reloc) \
-	ret = obj_reloc_overflow; \
-    } while(0)
-
-enum obj_reloc
-arch_apply_relocation(struct obj_file *f,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf64_Rela *rel,
-		       Elf64_Addr v)
-{
-    ia64_file_t *ifile = (ia64_file_t *) f;
-    ia64_symbol_t *isym  = (ia64_symbol_t *) sym;
-
-    Elf64_Addr  loc = (Elf64_Addr)(targsec->contents + rel->r_offset);
-    Elf64_Addr  dot = (targsec->header.sh_addr + rel->r_offset) & ~0x03;
-
-    Elf64_Addr  got = ifile->got->header.sh_addr;
-    Elf64_Addr  gp = ifile->gp;
-
-    Elf64_Addr *bundle = (Elf64_Addr *)(loc & ~0x03);
-    Elf64_Xword slot = loc & 0x03;
-
-    Elf64_Xword r_info = ELF64_R_TYPE(rel->r_info);
-
-    enum obj_reloc ret = obj_reloc_ok;
-
-    /* We cannot load modules compiled with -mconstant-gp */
-#ifndef EF_IA_64_CONS_GP
-#define EF_IA_64_CONS_GP 0x00000040
-#endif
-#ifndef EF_IA_64_NOFUNCDESC_CONS_GP
-#define EF_IA_64_NOFUNCDESC_CONS_GP 0x00000080
-#endif
-    if (f->header.e_flags & (EF_IA_64_CONS_GP | EF_IA_64_NOFUNCDESC_CONS_GP))
-	return obj_reloc_constant_gp;
-
-    switch (r_info)
-    {
-    case R_IA64_NONE :          /* none */
-    case R_IA64_LDXMOV :        /* Use of LTOFF22X.  */
-	break;
-
-    case R_IA64_IMM14 :         /* symbol + addend, add imm14 */
-	ret = obj_ia64_ins_imm14(v, bundle, slot);
-	break;
-
-    case R_IA64_IMM22 :         /* symbol + addend, add imm22 */
-	ret = obj_ia64_ins_imm22(v, bundle, slot);
-	break;
-
-    case R_IA64_IMM64 :         /* symbol + addend, movl imm64 */
-	ret = obj_ia64_ins_imm64(v, bundle, slot);
-	break;
-
-    case R_IA64_DIR32LSB :      /* symbol + addend, data4 LSB */
-	COPY_32LSB(loc, v);
-	break;
-
-    case R_IA64_DIR64LSB :      /* symbol + addend, data8 LSB */
-	COPY_64LSB(loc, v);
-	break;
-
-    case R_IA64_GPREL22 :       /* @gprel(sym + add), add imm22 */
-	v -= gp;
-	ret = obj_ia64_ins_imm22(v, bundle, slot);
-	break;
-
-    case R_IA64_GPREL64I :      /* @gprel(sym + add), mov imm64 */
-	v -= gp;
-	ret = obj_ia64_ins_imm64(v, bundle, slot);
-	break;
-
-    case R_IA64_GPREL32LSB :    /* @gprel(sym + add), data4 LSB */
-	COPY_32LSB(loc, v-gp);
-	break;
-
-    case R_IA64_GPREL64LSB :    /* @gprel(sym + add), data8 LSB */
-	COPY_64LSB(loc, v-gp);
-	break;
-
-    case R_IA64_LTOFF22 :       /* @ltoff(sym + add), add imm22 */
-    case R_IA64_LTOFF22X :      /* LTOFF22, relaxable.  */
-    case R_IA64_LTOFF64I :      /* @ltoff(sym + add), mov imm64 */
-	{
-	    ia64_got_t *ge;
-
-	    assert(isym != NULL);
-	    for (ge = isym->gotent; ge != NULL && ge->addend != rel->r_addend; )
-		ge = ge->next;
-	    assert(ge != NULL);
-	    if (!ge->reloc_done)
-	    {
-		ge->reloc_done = TRUE;
-		*(Elf64_Addr *)(ifile->got->contents + ge->offset) = v;
-	    }
-	    v = got + ge->offset - gp;
-	    if (r_info == R_IA64_LTOFF64I)
-		ret = obj_ia64_ins_imm64(v, bundle, slot);
-	    else
-		ret = obj_ia64_ins_imm22(v, bundle, slot);
-	}
-	break;
-
-    case R_IA64_PLTOFF22 :      /* @pltoff(sym + add), add imm22 */
-    case R_IA64_PLTOFF64I :     /* @pltoff(sym + add), mov imm64 */
-    case R_IA64_PLTOFF64LSB :   /* @pltoff(sym + add), data8 LSB */
-	{
-	    ia64_plt_t *pe;
-
-	    assert(isym != NULL);
-	    for (pe = isym->pltent; pe != NULL && pe->addend != rel->r_addend; )
-		pe = pe->next;
-	    assert(pe != NULL);
-	    if (!pe->reloc_done)
-	    {
-		pe->reloc_done = TRUE;
-		ret = obj_ia64_generate_plt(v, gp, ifile, isym, pe);
-	    }
-	    v = ifile->pltt->header.sh_addr + pe->text_offset - gp;
-	    switch (r_info)
-	    {
-	    case R_IA64_PLTOFF22 :
-		ret = obj_ia64_ins_imm22(v, bundle, slot);
-		break;
-
-	    case R_IA64_PLTOFF64I :
-		ret = obj_ia64_ins_imm64(v, bundle, slot);
-		break;
-
-	    case R_IA64_PLTOFF64LSB :
-		COPY_64LSB(loc, v);
-		break;
-	    }
-	}
-	break;
-
-    case R_IA64_FPTR64I :       /* @fptr(sym + add), mov imm64 */
-    case R_IA64_FPTR32LSB :     /* @fptr(sym + add), data4 LSB */
-    case R_IA64_FPTR64LSB :     /* @fptr(sym + add), data8 LSB */
-	assert(isym != NULL);
-	if (isym->root.secidx <= SHN_HIRESERVE)
-	{
-	    assert(isym->opdent != NULL);
-	    if (!isym->opdent->reloc_done)
-	    {
-		isym->opdent->reloc_done = TRUE;
-		*(Elf64_Addr *)(ifile->opd->contents + isym->opdent->offset) = v;
-		*(Elf64_Addr *)(ifile->opd->contents + isym->opdent->offset + 8) = gp;
-	    }
-	    v = ifile->opd->header.sh_addr + isym->opdent->offset;
-	}
-	switch (r_info)
-	{
-	case R_IA64_FPTR64I :
-	    ret = obj_ia64_ins_imm64(v, bundle, slot);
-	    break;
-
-	case R_IA64_FPTR32LSB :
-	    COPY_32LSB(loc, v);
-	    break;
-
-	case R_IA64_FPTR64LSB :     /* @fptr(sym + add), data8 LSB */
-	    /* Target can be unaligned */
-	    COPY_64LSB(loc, v);
-	    break;
-	}
-	break;
-
-    case R_IA64_PCREL21B :      /* @pcrel(sym + add), ptb, call */
-    case R_IA64_PCREL21M :      /* @pcrel(sym + add), chk.s */
-    case R_IA64_PCREL21F :      /* @pcrel(sym + add), fchkf */
-	assert(isym != NULL);
-	if ((isym->root.secidx > SHN_HIRESERVE) ||
-	   ((Elf64_Sxword) (v - dot) > 16777215) ||
-	   ((Elf64_Sxword) (v - dot) < -16777216))
-	{
-	    ia64_plt_t *pe;
-
-	    for (pe = isym->pltent; pe != NULL && pe->addend != rel->r_addend; )
-		pe = pe->next;
-	    assert(pe != NULL);
-	    if (!pe->reloc_done)
-	    {
-		pe->reloc_done = TRUE;
-		ret = obj_ia64_generate_plt(v, gp, ifile, isym, pe);
-	    }
-	    v = ifile->pltt->header.sh_addr + pe->text_offset;
-	}
-	v -= dot;
-	switch (r_info)
-	{
-	case R_IA64_PCREL21B :
-	    ret = obj_ia64_ins_pcrel21b(v, bundle, slot);
-	    break;
-
-	case R_IA64_PCREL21M :
-	    ret = obj_ia64_ins_pcrel21m(v, bundle, slot);
-	    break;
-
-	case R_IA64_PCREL21F :
-	    ret = obj_ia64_ins_pcrel21f(v, bundle, slot);
-	    break;
-	}
-	break;
-
-    case R_IA64_PCREL32LSB :    /* @pcrel(sym + add), data4 LSB */
-	COPY_32LSB(loc, v-dot);
-	break;
-
-    case R_IA64_PCREL64LSB :    /* @pcrel(sym + add), data8 LSB */
-	COPY_64LSB(loc, v-dot);
-	break;
-
-    case R_IA64_LTOFF_FPTR22 :  /* @ltoff(@fptr(s+a)), imm22 */
-    case R_IA64_LTOFF_FPTR64I : /* @ltoff(@fptr(s+a)), imm64 */
-    case R_IA64_LTOFF_FPTR32LSB : /* @ltoff(@fptr(s+a)), data4 */
-    case R_IA64_LTOFF_FPTR64LSB : /* @ltoff(@fptr(s+a)), data8 */
-	{
-	    ia64_got_t *ge;
-
-	    assert(isym != NULL);
-	    if (isym->root.secidx <= SHN_HIRESERVE)
-	    {
-		assert(isym->opdent != NULL);
-		if (!isym->opdent->reloc_done)
-		{
-		    isym->opdent->reloc_done = TRUE;
-		    *(Elf64_Addr *)(ifile->opd->contents + isym->opdent->offset) = v;
-		    *(Elf64_Addr *)(ifile->opd->contents + isym->opdent->offset + 8) = gp;
-		}
-		v = ifile->opd->header.sh_addr + isym->opdent->offset;
-	    }
-	    for (ge = isym->gotent; ge != NULL && ge->addend != rel->r_addend; )
-		ge = ge->next;
-	    assert(ge != NULL);
-	    if (!ge->reloc_done)
-	    {
-		ge->reloc_done = TRUE;
-		*(Elf64_Addr *)(ifile->got->contents + ge->offset) =  v;
-	    }
-	    v = got + ge->offset - gp;
-	    switch (r_info)
-	    {
-	    case R_IA64_LTOFF_FPTR22 :
-		ret = obj_ia64_ins_imm22(v, bundle, slot);
-		break;
-
-	    case R_IA64_LTOFF_FPTR64I :
-		ret = obj_ia64_ins_imm64(v, bundle, slot);
-		break;
-
-	    case R_IA64_LTOFF_FPTR32LSB :
-		COPY_32LSB(loc, v);
-		break;
-
-	    case R_IA64_LTOFF_FPTR64LSB :
-		COPY_64LSB(loc, v);
-		break;
-	    }
-	}
-	break;
-
-    case R_IA64_SEGREL32LSB :   /* @segrel(sym + add), data4 LSB */
-    case R_IA64_SEGREL64LSB :   /* @segrel(sym + add), data8 LSB */
-	if (targsec->header.sh_type & SHT_NOBITS)
-	    v = ifile->bss - v;
-	else if (targsec->header.sh_flags & SHF_EXECINSTR)
-	    v = ifile->text - v;
-	else
-	    v = ifile->data - v;
-	if (r_info == R_IA64_SEGREL32LSB)
-	    COPY_32LSB(loc, v);
-	else
-	    COPY_64LSB(loc, v);
-	break;
-
-    case R_IA64_SECREL32LSB :   /* @secrel(sym + add), data4 LSB */
-	COPY_32LSB(loc, targsec->header.sh_addr - v);
-	break;
-
-    case R_IA64_SECREL64LSB :   /* @secrel(sym + add), data8 LSB */
-	COPY_64LSB(loc, targsec->header.sh_addr - v);
-	break;
-
-    /*
-     * We don't handle the big-endian relocates
-     *
-     * R_IA64_DIR32MSB        symbol + addend, data4 MSB
-     * R_IA64_DIR64MSB        symbol + addend, data8 MSB
-     * R_IA64_GPREL32MSB      @gprel(sym + add), data4 MSB
-     * R_IA64_GPREL64MSB      @gprel(sym + add), data8 MSB
-     * R_IA64_PLTOFF64MSB     @pltoff(sym + add), data8 MSB
-     * R_IA64_FPTR32MSB       @fptr(sym + add), data4 MSB
-     * R_IA64_FPTR64MSB       @fptr(sym + add), data8 MSB
-     * R_IA64_PCREL32MSB      @pcrel(sym + add), data4 MSB
-     * R_IA64_PCREL64MSB      @pcrel(sym + add), data8 MSB
-     * R_IA64_SEGREL32MSB     @segrel(sym + add), data4 MSB
-     * R_IA64_SEGREL64MSB     @segrel(sym + add), data8 MSB
-     * R_IA64_SECREL32MSB     @secrel(sym + add), data4 MSB
-     * R_IA64_SECREL64MSB     @secrel(sym + add), data8 MSB
-     * R_IA64_REL32MSB        data 4 + REL
-     * R_IA64_REL64MSB        data 8 + REL
-     * R_IA64_LTV32MSB        symbol + addend, data4 MSB
-     * R_IA64_LTV64MSB        symbol + addend, data8 MSB
-     * R_IA64_IPLTMSB         dynamic reloc, imported PLT, MSB
-     */
-    default:
-    case R_IA64_REL32LSB :      /* data 4 + REL */
-    case R_IA64_REL64LSB :      /* data 8 + REL */
-    case R_IA64_LTV32LSB :      /* symbol + addend, data4 LSB */
-    case R_IA64_LTV64LSB :      /* symbol + addend, data8 LSB */
-    case R_IA64_IPLTLSB :       /* dynamic reloc, imported PLT, LSB */
-	ret = obj_reloc_unhandled;
-	break;
-    }
-    return ret;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-    ia64_file_t *ifile = (ia64_file_t *)f;
-    Elf64_Addr *opd = (Elf64_Addr *)(ifile->opd->contents);
-
-    if ((opd[0] = mod->init) != 0)
-    {
-	opd[1] = ifile->gp;
-	mod->init = ifile->opd->header.sh_addr;
-    }
-
-    if ((opd[2] = mod->cleanup) != 0)
-    {
-	opd[3] = ifile->gp;
-	mod->cleanup = ifile->opd->header.sh_addr + 16;
-    }
-
-    return 1;
-}
-
-int
-arch_archdata (struct obj_file *f, struct obj_section *archdata_sec)
-{
-    ia64_file_t *ifile = (ia64_file_t *)f;
-    struct archdata {
-	unsigned tgt_long unw_table;
-	unsigned tgt_long segment_base;
-	unsigned tgt_long unw_start;
-	unsigned tgt_long unw_end;
-	unsigned tgt_long gp;
-    } *ad;
-    int i;
-    struct obj_section *sec;
-
-    free(archdata_sec->contents);
-    archdata_sec->contents = xmalloc(sizeof(struct archdata));
-    memset(archdata_sec->contents, 0, sizeof(struct archdata));
-    archdata_sec->header.sh_size = sizeof(struct archdata);
-
-    ad = (struct archdata *)(archdata_sec->contents);
-    ad->gp = ifile->gp;
-    ad->unw_start = 0;
-    ad->unw_end = 0;
-    ad->unw_table = 0;
-    ad->segment_base = f->sections[1]->header.sh_addr;
-    for (i = 0; i < f->header.e_shnum; ++i)
-    {
-	sec = f->sections[i];
-	if (sec->header.sh_type == SHT_IA_64_UNWIND)
-	{
-	    ad->unw_start = sec->header.sh_addr;
-	    ad->unw_end = sec->header.sh_addr + sec->header.sh_size;
-	    break;
-	}
-    }
-
-    return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_kallsyms.c b/mdk-stage1/insmod-modutils/obj/obj_kallsyms.c
deleted file mode 100644
index 8385fb892..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_kallsyms.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/* Build a section containing all non-stack symbols.
-   Copyright 2000 Keith Owens <kaos@ocs.com.au>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <string.h>
-#include <malloc.h>
-
-#include "obj.h"
-#include "kallsyms.h"
-#include "util.h"
-
-/*======================================================================*/
-
-#define EXPAND_BY 4096  /* Arbitrary */
-
-/* Append a string to the big list of strings */
-
-static void
-append_string (const char *s, char **strings,
-	       ElfW(Word) *strings_size, ElfW(Word) *strings_left)
-{
-    int l = strlen(s) + 1;
-    while (l > *strings_left) {
-	*strings = xrealloc(*strings, *strings_size += EXPAND_BY);
-	*strings_left += EXPAND_BY;
-    }
-    memcpy((char *)*strings+*strings_size-*strings_left, s, l);
-    *strings_left -= l;
-}
-
-
-/* Append a symbol to the big list of symbols */
-
-static void
-append_symbol (const struct kallsyms_symbol *s,
-	       struct kallsyms_symbol **symbols,
-	       ElfW(Word) *symbols_size, ElfW(Word) *symbols_left)
-{
-    int l = sizeof(*s);
-    while (l > *symbols_left) {
-	*symbols = xrealloc(*symbols, *symbols_size += EXPAND_BY);
-	*symbols_left += EXPAND_BY;
-    }
-    memcpy((char *)*symbols+*symbols_size-*symbols_left, s, l);
-    *symbols_left -= l;
-}
-
-/* qsort compare routine to sort symbols */
-
-static const char *sym_strings;
-
-static int
-symbol_compare (const void *a, const void *b)
-{
-    struct kallsyms_symbol *c = (struct kallsyms_symbol *) a;
-    struct kallsyms_symbol *d = (struct kallsyms_symbol *) b;
-
-    if (c->symbol_addr > d->symbol_addr)
-	return(1);
-    if (c->symbol_addr < d->symbol_addr)
-	return(-1);
-    return(strcmp(sym_strings+c->name_off, sym_strings+d->name_off));
-}
-
-
-/* Extract all symbols from the input obj_file, ignore ones that are
- * no use for debugging, build an output obj_file containing only the
- * kallsyms section.
- *
- * The kallsyms section is a bit unusual.  It deliberately has no
- * relocatable data, all "pointers" are represented as byte offsets
- * into the the section.  This means it can be stored anywhere without
- * relocation problems.  In particular it can be stored within a kernel
- * image, it can be stored separately from the kernel image, it can be
- * appended to a module just before loading, it can be stored in a
- * separate area etc.
- *
- * Format of the kallsyms section.
- *
- * Header:
- *   Size of header.
- *   Total size of kallsyms data, including strings.
- *   Number of loaded sections.
- *   Offset to first section entry from start of header.
- *   Size of each section entry, excluding the name string.
- *   Number of symbols.
- *   Offset to first symbol entry from start of header.
- *   Size of each symbol entry, excluding the name string.
- *
- * Section entry - one per loaded section.
- *   Start of section[1].
- *   Size of section.
- *   Offset to name of section, from start of strings.
- *   Section flags.
- *
- * Symbol entry - one per symbol in the input file[2].
- *   Offset of section that owns this symbol, from start of section data.
- *   Address of symbol within the real section[1].
- *   Offset to name of symbol, from start of strings.
- *
- * Notes: [1] This is an exception to the "represent pointers as
- *            offsets" rule, it is a value, not an offset.  The start
- *            address of a section or a symbol is extracted from the
- *            obj_file data which may contain absolute or relocatable
- *            addresses.  If the addresses are relocatable then the
- *            caller must adjust the section and/or symbol entries in
- *            kallsyms after relocation.
- *        [2] Only symbols that fall within loaded sections are stored.
- */
-
-int
-obj_kallsyms (struct obj_file *fin, struct obj_file **fout_result)
-{
-    struct obj_file *fout;
-    int i, loaded = 0, *fin_to_allsym_map;
-    struct obj_section *isec, *osec;
-    struct kallsyms_header *a_hdr;
-    struct kallsyms_section *a_sec;
-    ElfW(Off) sec_off;
-    struct kallsyms_symbol *symbols = NULL, a_sym;
-    ElfW(Word) symbols_size = 0, symbols_left = 0;
-    char *strings = NULL, *p;
-    ElfW(Word) strings_size = 0, strings_left = 0;
-    ElfW(Off) file_offset;
-    static char strtab[] = "\000" KALLSYMS_SEC_NAME;
-
-    /* Create the kallsyms section.  */
-    fout = arch_new_file();
-    memset(fout, 0, sizeof(*fout));
-    fout->symbol_cmp = strcmp;
-    fout->symbol_hash = obj_elf_hash;
-    fout->load_order_search_start = &fout->load_order;
-
-    /* Copy file characteristics from input file and modify to suit */
-    memcpy(&fout->header, &fin->header, sizeof(fout->header));
-    fout->header.e_type = ET_REL;		/* Output is relocatable */
-    fout->header.e_entry = 0;			/* No entry point */
-    fout->header.e_phoff = 0;			/* No program header */
-    file_offset = sizeof(fout->header);		/* Step over Elf header */
-    fout->header.e_shoff = file_offset;		/* Section headers next */
-    fout->header.e_phentsize = 0;		/* No program header */
-    fout->header.e_phnum = 0;			/* No program header */
-    fout->header.e_shnum = KALLSYMS_IDX+1;	/* Initial, strtab, kallsyms */
-    fout->header.e_shstrndx = KALLSYMS_IDX-1;	/* strtab */
-    file_offset += fout->header.e_shentsize * fout->header.e_shnum;
-
-    /* Populate the section data for kallsyms itself */
-    fout->sections = xmalloc(sizeof(*(fout->sections))*fout->header.e_shnum);
-    memset(fout->sections, 0, sizeof(*(fout->sections))*fout->header.e_shnum);
-
-    fout->sections[0] = osec = arch_new_section();
-    memset(osec, 0, sizeof(*osec));
-    osec->header.sh_type = SHT_NULL;
-    osec->header.sh_link = SHN_UNDEF;
-
-    fout->sections[KALLSYMS_IDX-1] = osec = arch_new_section();
-    memset(osec, 0, sizeof(*osec));
-    osec->name = ".strtab";
-    osec->header.sh_type = SHT_STRTAB;
-    osec->header.sh_link = SHN_UNDEF;
-    osec->header.sh_offset = file_offset;
-    osec->header.sh_size = sizeof(strtab);
-    osec->contents = xmalloc(sizeof(strtab));
-    memcpy(osec->contents, strtab, sizeof(strtab));
-    file_offset += osec->header.sh_size;
-
-    fout->sections[KALLSYMS_IDX] = osec = arch_new_section();
-    memset(osec, 0, sizeof(*osec));
-    osec->name = KALLSYMS_SEC_NAME;
-    osec->header.sh_name = 1;			/* Offset in strtab */
-    osec->header.sh_type = SHT_PROGBITS;	/* Load it */
-    osec->header.sh_flags = SHF_ALLOC;		/* Read only data */
-    osec->header.sh_link = SHN_UNDEF;
-    osec->header.sh_addralign = sizeof(ElfW(Word));
-    file_offset = (file_offset + osec->header.sh_addralign - 1)
-	& -(osec->header.sh_addralign);
-    osec->header.sh_offset = file_offset;
-
-    /* How many loaded sections are there? */
-    for (i = 0; i < fin->header.e_shnum; ++i) {
-	if (fin->sections[i]->header.sh_flags & SHF_ALLOC)
-	    ++loaded;
-    }
-
-    /* Initial contents, header + one entry per input section.  No strings. */
-    osec->header.sh_size = sizeof(*a_hdr) + loaded*sizeof(*a_sec);
-    a_hdr = (struct kallsyms_header *) osec->contents =
-    	xmalloc(osec->header.sh_size);
-    memset(osec->contents, 0, osec->header.sh_size);
-    a_hdr->size = sizeof(*a_hdr);
-    a_hdr->sections = loaded;
-    a_hdr->section_off = a_hdr->size;
-    a_hdr->section_size = sizeof(*a_sec);
-    a_hdr->symbol_off = osec->header.sh_size;
-    a_hdr->symbol_size = sizeof(a_sym);
-    a_hdr->start = (ElfW(Addr))(~0);
-
-    /* Map input section numbers to kallsyms section offsets. */
-    sec_off = 0;	/* Offset to first kallsyms section entry */
-    fin_to_allsym_map = xmalloc(sizeof(*fin_to_allsym_map)*fin->header.e_shnum);
-    for (i = 0; i < fin->header.e_shnum; ++i) {
-	isec = fin->sections[i];
-	if (isec->header.sh_flags & SHF_ALLOC) {
-	    fin_to_allsym_map[isec->idx] = sec_off;
-	    sec_off += a_hdr->section_size;
-	}
-	else
-	    fin_to_allsym_map[isec->idx] = -1;	/* Ignore this section */
-    }
-
-    /* Copy the loaded section data. */
-    a_sec = (struct kallsyms_section *) ((char *) a_hdr + a_hdr->section_off);
-    for (i = 0; i < fin->header.e_shnum; ++i) {
-	isec = fin->sections[i];
-	if (!(isec->header.sh_flags & SHF_ALLOC))
-	    continue;
-	a_sec->start = isec->header.sh_addr;
-	a_sec->size = isec->header.sh_size;
-	a_sec->flags = isec->header.sh_flags;
-	a_sec->name_off = strings_size - strings_left;
-	append_string(isec->name, &strings, &strings_size, &strings_left);
-	if (a_sec->start < a_hdr->start)
-	    a_hdr->start = a_sec->start;
-	if (a_sec->start+a_sec->size > a_hdr->end)
-	    a_hdr->end = a_sec->start+a_sec->size;
-	++a_sec;
-    }
-
-    /* Build the kallsyms symbol table from the symbol hashes. */
-    for (i = 0; i < HASH_BUCKETS; ++i) {
-	struct obj_symbol *sym = fin->symtab[i];
-	for (sym = fin->symtab[i]; sym ; sym = sym->next) {
-	    if (!sym || sym->secidx >= fin->header.e_shnum)
-		continue;
-	    if ((a_sym.section_off = fin_to_allsym_map[sym->secidx]) == -1)
-		continue;
-	    if (strcmp(sym->name, "gcc2_compiled.") == 0 ||
-		strncmp(sym->name, "__insmod_", 9) == 0)
-		continue;
-	    a_sym.symbol_addr = sym->value;
-	    if (fin->header.e_type == ET_REL)
-		a_sym.symbol_addr += fin->sections[sym->secidx]->header.sh_addr;
-	    a_sym.name_off = strings_size - strings_left;
-	    append_symbol(&a_sym, &symbols, &symbols_size, &symbols_left);
-	    append_string(sym->name, &strings, &strings_size, &strings_left);
-	    ++a_hdr->symbols;
-	}
-    }
-    free(fin_to_allsym_map);
-
-    /* Sort the symbols into ascending order by address and name */
-    sym_strings = strings;	/* For symbol_compare */
-    qsort((char *) symbols, (unsigned) a_hdr->symbols,
-	sizeof(* symbols), symbol_compare);
-    sym_strings = NULL;
-
-    /* Put the lot together */
-    osec->header.sh_size = a_hdr->total_size =
-	a_hdr->symbol_off +
-	a_hdr->symbols*a_hdr->symbol_size +
-	strings_size - strings_left;
-    a_hdr = (struct kallsyms_header *) osec->contents =
-	xrealloc(a_hdr, a_hdr->total_size);
-    p = (char *)a_hdr + a_hdr->symbol_off;
-    memcpy(p, symbols, a_hdr->symbols*a_hdr->symbol_size);
-    free(symbols);
-    p += a_hdr->symbols*a_hdr->symbol_size;
-    a_hdr->string_off = p - (char *)a_hdr;
-    memcpy(p, strings, strings_size - strings_left);
-    free(strings);
-
-    *fout_result = fout;
-    return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_load.c b/mdk-stage1/insmod-modutils/obj/obj_load.c
deleted file mode 100644
index 4db20a998..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_load.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/* Elf file reader.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-   obj_free() added by Bj�rn Ekwall <bj0rn@blox.se> March 1999
-   Support for kallsyms Keith Owens <kaos@ocs.com.au> April 2000
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <alloca.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-#include "obj.h"
-#include "util.h"
-
-/*======================================================================*/
-
-struct obj_file *
-obj_load (int fp, Elf32_Half e_type, const char *filename)
-{
-  struct obj_file *f;
-  ElfW(Shdr) *section_headers;
-  int shnum, i;
-  char *shstrtab;
-
-  /* Read the file header.  */
-
-  f = arch_new_file();
-  memset(f, 0, sizeof(*f));
-  f->symbol_cmp = strcmp;
-  f->symbol_hash = obj_elf_hash;
-  f->load_order_search_start = &f->load_order;
-
-  gzf_lseek(fp, 0, SEEK_SET);
-  if (gzf_read(fp, &f->header, sizeof(f->header)) != sizeof(f->header))
-    {
-      error("error reading ELF header %s: %m", filename);
-      return NULL;
-    }
-
-  if (f->header.e_ident[EI_MAG0] != ELFMAG0
-      || f->header.e_ident[EI_MAG1] != ELFMAG1
-      || f->header.e_ident[EI_MAG2] != ELFMAG2
-      || f->header.e_ident[EI_MAG3] != ELFMAG3)
-    {
-      error("%s is not an ELF file", filename);
-      return NULL;
-    }
-  if (f->header.e_ident[EI_CLASS] != ELFCLASSM
-      || f->header.e_ident[EI_DATA] != ELFDATAM
-      || f->header.e_ident[EI_VERSION] != EV_CURRENT
-      || !MATCH_MACHINE(f->header.e_machine))
-    {
-      error("ELF file %s not for this architecture", filename);
-      return NULL;
-    }
-  if (f->header.e_type != e_type && e_type != ET_NONE)
-    {
-      switch (e_type) {
-      case ET_REL:
-	error("ELF file %s not a relocatable object", filename);
-	break;
-      case ET_EXEC:
-	error("ELF file %s not an executable object", filename);
-	break;
-      default:
-	error("ELF file %s has wrong type, expecting %d got %d",
-		filename, e_type, f->header.e_type);
-	break;
-      }
-      return NULL;
-    }
-
-  /* Read the section headers.  */
-
-  if (f->header.e_shentsize != sizeof(ElfW(Shdr)))
-    {
-      error("section header size mismatch %s: %lu != %lu",
-	    filename,
-	    (unsigned long)f->header.e_shentsize,
-	    (unsigned long)sizeof(ElfW(Shdr)));
-      return NULL;
-    }
-
-  shnum = f->header.e_shnum;
-  f->sections = xmalloc(sizeof(struct obj_section *) * shnum);
-  memset(f->sections, 0, sizeof(struct obj_section *) * shnum);
-
-  section_headers = alloca(sizeof(ElfW(Shdr)) * shnum);
-  gzf_lseek(fp, f->header.e_shoff, SEEK_SET);
-  if (gzf_read(fp, section_headers, sizeof(ElfW(Shdr))*shnum) != sizeof(ElfW(Shdr))*shnum)
-    {
-      error("error reading ELF section headers %s: %m", filename);
-      return NULL;
-    }
-
-  /* Read the section data.  */
-
-  for (i = 0; i < shnum; ++i)
-    {
-      struct obj_section *sec;
-
-      f->sections[i] = sec = arch_new_section();
-      memset(sec, 0, sizeof(*sec));
-
-      sec->header = section_headers[i];
-      sec->idx = i;
-
-      switch (sec->header.sh_type)
-	{
-	case SHT_NULL:
-	case SHT_NOTE:
-	case SHT_NOBITS:
-	  /* ignore */
-	  break;
-
-	case SHT_PROGBITS:
-	case SHT_SYMTAB:
-	case SHT_STRTAB:
-	case SHT_RELM:
-	  if (sec->header.sh_size > 0)
-	    {
-	      sec->contents = xmalloc(sec->header.sh_size);
-	      gzf_lseek(fp, sec->header.sh_offset, SEEK_SET);
-	      if (gzf_read(fp, sec->contents, sec->header.sh_size) != sec->header.sh_size)
-		{
-		  error("error reading ELF section data %s: %m", filename);
-		  return NULL;
-		}
-	    }
-	  else
-	    sec->contents = NULL;
-	  break;
-
-#if SHT_RELM == SHT_REL
-	case SHT_RELA:
-	  if (sec->header.sh_size) {
-	    error("RELA relocations not supported on this architecture %s", filename);
-	    return NULL;
-	  }
-	  break;
-#else
-	case SHT_REL:
-	  if (sec->header.sh_size) {
-	    error("REL relocations not supported on this architecture %s", filename);
-	    return NULL;
-	  }
-	  break;
-#endif
-
-	default:
-	  if (sec->header.sh_type >= SHT_LOPROC)
-	    {
-	      if (arch_load_proc_section(sec, fp) < 0)
-		return NULL;
-	      break;
-	    }
-
-	  error("can't handle sections of type %ld %s",
-		(long)sec->header.sh_type, filename);
-	  return NULL;
-	}
-    }
-
-  /* Do what sort of interpretation as needed by each section.  */
-
-  shstrtab = f->sections[f->header.e_shstrndx]->contents;
-
-  for (i = 0; i < shnum; ++i)
-    {
-      struct obj_section *sec = f->sections[i];
-      sec->name = shstrtab + sec->header.sh_name;
-    }
-
-  for (i = 0; i < shnum; ++i)
-    {
-      struct obj_section *sec = f->sections[i];
-
-      /* .modinfo and .modstring should be contents only but gcc has no
-       *  attribute for that.  The kernel may have marked these sections as
-       *  ALLOC, ignore the allocate bit.
-       */
-      if (strcmp(sec->name, ".modinfo") == 0 ||
-	  strcmp(sec->name, ".modstring") == 0)
-	sec->header.sh_flags &= ~SHF_ALLOC;
-
-      if (sec->header.sh_flags & SHF_ALLOC)
-	obj_insert_section_load_order(f, sec);
-
-      switch (sec->header.sh_type)
-	{
-	case SHT_SYMTAB:
-	  {
-	    unsigned long nsym, j;
-	    char *strtab;
-	    ElfW(Sym) *sym;
-
-	    if (sec->header.sh_entsize != sizeof(ElfW(Sym)))
-	      {
-		error("symbol size mismatch %s: %lu != %lu",
-		      filename,
-		      (unsigned long)sec->header.sh_entsize,
-		      (unsigned long)sizeof(ElfW(Sym)));
-		return NULL;
-	      }
-
-	    nsym = sec->header.sh_size / sizeof(ElfW(Sym));
-	    strtab = f->sections[sec->header.sh_link]->contents;
-	    sym = (ElfW(Sym) *) sec->contents;
-
-	    /* Allocate space for a table of local symbols.  */
-	    j = f->local_symtab_size = sec->header.sh_info;
-	    f->local_symtab = xmalloc(j *= sizeof(struct obj_symbol *));
-	    memset(f->local_symtab, 0, j);
-
-	    /* Insert all symbols into the hash table.  */
-	    for (j = 1, ++sym; j < nsym; ++j, ++sym)
-	      {
-		const char *name;
-		if (sym->st_name)
-		  name = strtab+sym->st_name;
-		else
-		  name = f->sections[sym->st_shndx]->name;
-
-		obj_add_symbol(f, name, j, sym->st_info, sym->st_shndx,
-			       sym->st_value, sym->st_size);
-
-	      }
-	  }
-	break;
-	}
-    }
-
-  /* second pass to add relocation data to symbols */
-  for (i = 0; i < shnum; ++i)
-    {
-      struct obj_section *sec = f->sections[i];
-      switch (sec->header.sh_type)
-	{
-	case SHT_RELM:
-	  {
-	    unsigned long nrel, j;
-	    ElfW(RelM) *rel;
-	    struct obj_section *symtab;
-	    char *strtab;
-	    if (sec->header.sh_entsize != sizeof(ElfW(RelM)))
-	      {
-		error("relocation entry size mismatch %s: %lu != %lu",
-		      filename,
-		      (unsigned long)sec->header.sh_entsize,
-		      (unsigned long)sizeof(ElfW(RelM)));
-		return NULL;
-	      }
-
-	    nrel = sec->header.sh_size / sizeof(ElfW(RelM));
-	    rel = (ElfW(RelM) *) sec->contents;
-	    symtab = f->sections[sec->header.sh_link];
-	    strtab = f->sections[symtab->header.sh_link]->contents;
-
-	    /* Save the relocate type in each symbol entry.  */
-	    for (j = 0; j < nrel; ++j, ++rel)
-	      {
-		ElfW(Sym) *extsym;
-		struct obj_symbol *intsym;
-		unsigned long symndx;
-		symndx = ELFW(R_SYM)(rel->r_info);
-		if (symndx)
-		  {
-		    extsym = ((ElfW(Sym) *) symtab->contents) + symndx;
-		    if (ELFW(ST_BIND)(extsym->st_info) == STB_LOCAL)
-		      {
-			/* Local symbols we look up in the local table to be sure
-			   we get the one that is really intended.  */
-			intsym = f->local_symtab[symndx];
-		      }
-		    else
-		      {
-			/* Others we look up in the hash table.  */
-			const char *name;
-			if (extsym->st_name)
-			  name = strtab + extsym->st_name;
-			else
-			  name = f->sections[extsym->st_shndx]->name;
-			intsym = obj_find_symbol(f, name);
-		      }
-		    intsym->r_type = ELFW(R_TYPE)(rel->r_info);
-		  }
-	      }
-	  }
-	  break;
-	}
-    }
-
-  f->filename = xstrdup(filename);
-
-  return f;
-}
-
-void obj_free(struct obj_file *f)
-{
-	struct obj_section *sec;
-	struct obj_symbol *sym;
-	struct obj_symbol *next;
-	int i;
-	int n;
-
-	if (f->sections) {
-		n = f->header.e_shnum;
-		for (i = 0; i < n; ++i) {
-			if ((sec = f->sections[i]) != NULL) {
-				if (sec->contents)
-					free(sec->contents);
-				free(sec);
-			}
-		}
-		free(f->sections);
-	}
-
-	for (i = 0; i < HASH_BUCKETS; ++i) {
-		for (sym = f->symtab[i]; sym; sym = next) {
-			next = sym->next;
-			free(sym);
-		}
-	}
-
-	if (f->local_symtab)
-		free(f->local_symtab);
-
-	if (f->filename)
-		free((char *)(f->filename));
-
-	if (f->persist)
-		free((char *)(f->persist));
-
-	free(f);
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_m68k.c b/mdk-stage1/insmod-modutils/obj/obj_m68k.c
deleted file mode 100644
index cb485aed7..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_m68k.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/* m68k specific support for Elf loading and relocation.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stddef.h>
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  return xmalloc(sizeof(struct obj_file));
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  return xmalloc(sizeof(struct obj_symbol));
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *ef,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf32_Rela *rel,
-		       Elf32_Addr v)
-{
-  char *loc = targsec->contents + rel->r_offset;
-  Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF32_R_TYPE(rel->r_info))
-    {
-    case R_68K_NONE:
-      break;
-
-    case R_68K_8:
-      if (v > 0xff)
-	ret = obj_reloc_overflow;
-      *(char *)loc = v;
-      break;
-    case R_68K_16:
-      if (v > 0xffff)
-	ret = obj_reloc_overflow;
-      *(short *)loc = v;
-      break;
-    case R_68K_32:
-      *(int *)loc = v;
-      break;
-
-    case R_68K_PC8:
-      v -= dot;
-      if ((Elf32_Sword)v > 0x7f || (Elf32_Sword)v < -(Elf32_Sword)0x80)
-	ret = obj_reloc_overflow;
-      *(char *)loc = v;
-      break;
-    case R_68K_PC16:
-      v -= dot;
-      if ((Elf32_Sword)v > 0x7fff || (Elf32_Sword)v < -(Elf32_Sword)0x8000)
-	ret = obj_reloc_overflow;
-      *(short *)loc = v;
-      break;
-    case R_68K_PC32:
-      *(int *)loc = v - dot;
-      break;
-
-    case R_68K_RELATIVE:
-      *(int *)loc += ef->baseaddr;
-      break;
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *ef)
-{
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_mips.c b/mdk-stage1/insmod-modutils/obj/obj_mips.c
deleted file mode 100644
index c2315b659..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_mips.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/* MIPS specific support for Elf loading and relocation.
-   Copyright 1997, 1998 Linux International.
-   Contributed by Ralf Baechle <ralf@gnu.ai.mit.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <stdlib.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct mips_hi16
-{
-  struct mips_hi16 *next;
-  Elf32_Addr *addr;
-  Elf32_Addr value;
-};
-
-struct mips_file
-{
-  struct obj_file root;
-  struct mips_hi16 *mips_hi16_list;
-};
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  struct mips_file *mf;
-
-  mf = xmalloc(sizeof(*mf));
-  mf->mips_hi16_list = NULL;
-
-  return (struct obj_file *) mf;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  return xmalloc(sizeof(struct obj_symbol));
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-  switch (sec->header.sh_type)
-    {
-    case SHT_MIPS_DEBUG:
-    case SHT_MIPS_REGINFO:
-      /* Actually these two sections are as useless as something can be ...  */
-      sec->contents = NULL;
-      break;
-
-    case SHT_MIPS_LIBLIST:
-    case SHT_MIPS_CONFLICT:
-    case SHT_MIPS_GPTAB:
-    case SHT_MIPS_UCODE:
-    case SHT_MIPS_OPTIONS:
-    case SHT_MIPS_DWARF:
-    case SHT_MIPS_EVENTS:
-      /* These shouldn't ever be in a module file.  */
-      error("Unhandled section header type: %08x", sec->header.sh_type);
-
-    default:
-      /* We don't even know the type.  This time it might as well be a
-	 supernova.  */
-      error("Unknown section header type: %08x", sec->header.sh_type);
-      return -1;
-    }
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *f,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf32_Rel *rel,
-		       Elf32_Addr v)
-{
-  struct mips_file *mf = (struct mips_file *)f;
-  Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
-  Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-  enum obj_reloc ret = obj_reloc_ok;
-
-  /* _gp_disp is a magic symbol for PIC which is not supported for
-     the kernel and loadable modules.  */
-  if (strcmp(sym->name, "_gp_disp") == 0)
-	ret = obj_reloc_unhandled;
-
-  switch (ELF32_R_TYPE(rel->r_info))
-    {
-    case R_MIPS_NONE:
-      break;
-
-    case R_MIPS_32:
-      *loc += v;
-      break;
-
-    case R_MIPS_26:
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      if ((v & 0xf0000000) != ((dot + 4) & 0xf0000000))
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x03ffffff) | ((*loc + (v >> 2)) & 0x03ffffff);
-      break;
-
-    case R_MIPS_HI16:
-      {
-	struct mips_hi16 *n;
-
-	/* We cannot relocate this one now because we don't know the value
-	   of the carry we need to add.  Save the information, and let LO16
-	   do the actual relocation.  */
-	n = (struct mips_hi16 *) xmalloc (sizeof *n);
-	n->addr = loc;
-	n->value = v;
-	n->next = mf->mips_hi16_list;
-	mf->mips_hi16_list = n;
-	break;
-      }
-
-    case R_MIPS_LO16:
-      {
-	unsigned long insnlo = *loc;
-	Elf32_Addr val, vallo;
-
-	/* Sign extend the addend we extract from the lo insn.  */
-	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
-
-	if (mf->mips_hi16_list != NULL)
-	  {
-	    struct mips_hi16 *l;
-
-	    l = mf->mips_hi16_list;
-	    while (l != NULL)
-	      {
-		struct mips_hi16 *next;
-		unsigned long insn;
-
-		/* The value for the HI16 had best be the same. */
-		assert(v == l->value);
-
-		/* Do the HI16 relocation.  Note that we actually don't
-		   need to know anything about the LO16 itself, except where
-		   to find the low 16 bits of the addend needed by the LO16.  */
-		insn = *l->addr;
-		val = ((insn & 0xffff) << 16) + vallo;
-		val += v;
-
-		/* Account for the sign extension that will happen in the
-		   low bits.  */
-		val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
-
-		insn = (insn &~ 0xffff) | val;
-		*l->addr = insn;
-
-		next = l->next;
-		free(l);
-		l = next;
-	      }
-
-	    mf->mips_hi16_list = NULL;
-	  }
-
-	/* Ok, we're done with the HI16 relocs.  Now deal with the LO16.  */
-	val = v + vallo;
-	insnlo = (insnlo & ~0xffff) | (val & 0xffff);
-	*loc = insnlo;
-	break;
-      }
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_ppc.c b/mdk-stage1/insmod-modutils/obj/obj_ppc.c
deleted file mode 100644
index 89bb8e46b..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_ppc.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/* PowerPC specific support for Elf loading and relocation.
-   Copyright 1996, 1997 Linux International.
-
-   Adapted by Paul Mackerras <paulus@cs.anu.edu.au> from the
-   obj-sparc.c and obj-alpha.c files.
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stddef.h>
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-#include <assert.h>
-
-
-/*======================================================================*/
-
-/*
- * Unfortunately, the bl (branch-and-link) instruction used for
- * procedure calls on the PowerPC can only reach +/- 32MB from the
- * current instruction.  If the module is loaded far enough away from
- * the main kernel text (or other modules) that this limit is
- * exceeded, we have to redirect procedure calls via a procedure
- * linkage table (PLT).  Each entry in the PLT contains instructions
- * to put the address of the procedure in a register and jump to it.
- */
-
-typedef unsigned int instruction;	/* a powerpc instruction (4 bytes) */
-
-struct ppc_plt_entry
-{
-  struct ppc_plt_entry *next;
-  ElfW(Addr) addend;
-  int offset;
-  int inited;
-};
-
-struct ppc_file
-{
-  struct obj_file file;
-  struct obj_section *plt;
-};
-
-struct ppc_symbol
-{
-  struct obj_symbol sym;
-  struct ppc_plt_entry *plt_entries;
-};
-
-struct obj_file *
-arch_new_file (void)
-{
-  struct ppc_file *f;
-
-  f = xmalloc(sizeof(struct ppc_file));
-  f->plt = NULL;
-  return &f->file;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  struct ppc_symbol *p;
-
-  p = xmalloc(sizeof(struct ppc_symbol));
-  p->plt_entries = NULL;
-  return &p->sym;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *ef,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf32_Rela *rel,
-		       Elf32_Addr v)
-{
-  Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
-  Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-  struct ppc_file *pf = (struct ppc_file *) ef;
-  struct ppc_symbol *psym = (struct ppc_symbol *) sym;
-  struct ppc_plt_entry *pe;
-  instruction *ip;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF32_R_TYPE(rel->r_info))
-    {
-    case R_PPC_ADDR16_HA:
-      *(unsigned short *)loc = (v + 0x8000) >> 16;
-      break;
-
-    case R_PPC_ADDR16_HI:
-      *(unsigned short *)loc = v >> 16;
-      break;
-
-    case R_PPC_ADDR16_LO:
-      *(unsigned short *)loc = v;
-      break;
-
-    case R_PPC_REL24:
-      /* find the plt entry and initialize it if necessary */
-      assert(psym != NULL);
-      for (pe = psym->plt_entries; pe != NULL && pe->addend != rel->r_addend; )
-	pe = pe->next;
-      assert(pe != NULL);
-      if (!pe->inited)
-	{
-	  ip = (instruction *) (pf->plt->contents + pe->offset);
-	  ip[0] = 0x3d600000 + ((v + 0x8000) >> 16);  /* lis r11,sym@ha */
-	  ip[1] = 0x396b0000 + (v & 0xffff);	      /* addi r11,r11,sym@l */
-	  ip[2] = 0x7d6903a6;			      /* mtctr r11 */
-	  ip[3] = 0x4e800420;			      /* bctr */
-	  pe->inited = 1;
-	}
-
-      v -= dot;
-      if ((int)v < -0x02000000 || (int)v >= 0x02000000)
-	{
-	  /* go via the plt */
-	  v = pf->plt->header.sh_addr + pe->offset - dot;
-	}
-      if (v & 3)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x03fffffc) | (v & 0x03fffffc);
-      break;
-
-    case R_PPC_REL32:
-      *loc = v - dot;
-      break;
-
-    case R_PPC_ADDR32:
-      *loc = v;
-      break;
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
-  struct ppc_file *pf = (struct ppc_file *) f;
-  int i, offset;
-  struct obj_section *sec, *syms, *strs;
-  ElfW(Rela) *rel, *relend;
-  ElfW(Sym) *symtab, *extsym;
-  const char *strtab, *name;
-  struct ppc_symbol *intsym;
-  struct ppc_plt_entry *pe;
-
-  offset = 0;
-  for (i = 0; i < f->header.e_shnum; ++i)
-    {
-      sec = f->sections[i];
-      if (sec->header.sh_type != SHT_RELM)
-	continue;
-      syms = f->sections[sec->header.sh_link];
-      strs = f->sections[syms->header.sh_link];
-
-      rel = (ElfW(RelM) *) sec->contents;
-      relend = rel + (sec->header.sh_size / sizeof(ElfW(RelM)));
-      symtab = (ElfW(Sym) *) syms->contents;
-      strtab = (const char *) strs->contents;
-
-      for (; rel < relend; ++rel)
-	{
-	  if (ELF32_R_TYPE(rel->r_info) != R_PPC_REL24)
-	    continue;
-	  extsym = &symtab[ELF32_R_SYM(rel->r_info)];
-	  if (extsym->st_name)
-	    name = strtab + extsym->st_name;
-	  else
-	    name = f->sections[extsym->st_shndx]->name;
-	  intsym = (struct ppc_symbol *) obj_find_symbol(f, name);
-
-	  for (pe = intsym->plt_entries; pe != NULL; pe = pe->next)
-	    if (pe->addend == rel->r_addend)
-	      break;
-	  if (pe == NULL)
-	    {
-	      pe = xmalloc(sizeof(struct ppc_plt_entry));
-	      pe->next = intsym->plt_entries;
-	      pe->addend = rel->r_addend;
-	      pe->offset = offset;
-	      pe->inited = 0;
-	      intsym->plt_entries = pe;
-	      offset += 16;
-	    }
-	}
-    }
-
-  pf->plt = obj_create_alloced_section(f, ".plt", 16, offset);
-
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_reloc.c b/mdk-stage1/insmod-modutils/obj/obj_reloc.c
deleted file mode 100644
index f5f2de90d..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_reloc.c
+++ /dev/null
@@ -1,435 +0,0 @@
-/* Elf relocation routines.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <assert.h>
-#include <alloca.h>
-
-#include <obj.h>
-#include <util.h>
-
-/*======================================================================*/
-
-int
-obj_string_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
-		 const char *string)
-{
-  struct obj_string_patch_struct *p;
-  struct obj_section *strsec;
-  size_t len = strlen(string)+1;
-  char *loc;
-
-  p = xmalloc(sizeof(*p));
-  p->next = f->string_patches;
-  p->reloc_secidx = secidx;
-  p->reloc_offset = offset;
-  f->string_patches = p;
-
-  strsec = obj_find_section(f, ".kstrtab");
-  if (strsec == NULL)
-    {
-      strsec = obj_create_alloced_section(f, ".kstrtab", 1, len);
-      p->string_offset = 0;
-      loc = strsec->contents;
-    }
-  else
-    {
-      p->string_offset = strsec->header.sh_size;
-      loc = obj_extend_section(strsec, len);
-    }
-  memcpy(loc, string, len);
-
-  return 1;
-}
-
-int
-obj_symbol_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
-		 struct obj_symbol *sym)
-{
-  struct obj_symbol_patch_struct *p;
-
-  p = xmalloc(sizeof(*p));
-  p->next = f->symbol_patches;
-  p->reloc_secidx = secidx;
-  p->reloc_offset = offset;
-  p->sym = sym;
-  f->symbol_patches = p;
-
-  return 1;
-}
-
-int
-obj_check_undefineds(struct obj_file *f, int quiet)
-{
-  unsigned long i;
-  int ret = 1;
-
-  for (i = 0; i < HASH_BUCKETS; ++i)
-    {
-      struct obj_symbol *sym;
-      for (sym = f->symtab[i]; sym ; sym = sym->next)
-	if (sym->secidx == SHN_UNDEF)
-	  {
-	    if (ELFW(ST_BIND)(sym->info) == STB_WEAK)
-	      {
-		sym->secidx = SHN_ABS;
-		sym->value = 0;
-	      }
-	    else if (sym->r_type) /* assumes R_arch_NONE is 0 on all arch */
-	      {
-		if (!quiet)
-			error("unresolved symbol %s", sym->name);
-		ret = 0;
-	      }
-	  }
-    }
-
-  return ret;
-}
-
-void
-obj_clear_undefineds(struct obj_file *f)
-{
-  unsigned long i;
-  struct obj_symbol *sym;
-  for (i = 0; i < HASH_BUCKETS; ++i)
-    {
-      for (sym = f->symtab[i]; sym ; sym = sym->next)
-	if (sym->secidx == SHN_UNDEF)
-	  {
-	    sym->secidx = SHN_ABS;
-	    sym->value = 0;
-	  }
-    }
-}
-
-void
-obj_allocate_commons(struct obj_file *f)
-{
-  struct common_entry
-  {
-    struct common_entry *next;
-    struct obj_symbol *sym;
-  } *common_head = NULL;
-
-  unsigned long i;
-
-  for (i = 0; i < HASH_BUCKETS; ++i)
-    {
-      struct obj_symbol *sym;
-      for (sym = f->symtab[i]; sym ; sym = sym->next)
-	if (sym->secidx == SHN_COMMON)
-	  {
-	    /* Collect all COMMON symbols and sort them by size so as to
-	       minimize space wasted by alignment requirements.  */
-	    {
-	      struct common_entry **p, *n;
-	      for (p = &common_head; *p ; p = &(*p)->next)
-		if (sym->size <= (*p)->sym->size)
-		  break;
-
-	      n = alloca(sizeof(*n));
-	      n->next = *p;
-	      n->sym = sym;
-	      *p = n;
-	    }
-	  }
-    }
-
-  for (i = 1; i < f->local_symtab_size; ++i)
-    {
-      struct obj_symbol *sym = f->local_symtab[i];
-      if (sym && sym->secidx == SHN_COMMON)
-	{
-	  struct common_entry **p, *n;
-	  for (p = &common_head; *p ; p = &(*p)->next)
-	    if (sym == (*p)->sym)
-	      break;
-	    else if (sym->size < (*p)->sym->size)
-	      {
-		n = alloca(sizeof(*n));
-		n->next = *p;
-		n->sym = sym;
-		*p = n;
-		break;
-	      }
-	}
-    }
-
-  if (common_head)
-    {
-      /* Find the bss section.  */
-      for (i = 0; i < f->header.e_shnum; ++i)
-	if (f->sections[i]->header.sh_type == SHT_NOBITS)
-	  break;
-
-      /* If for some reason there hadn't been one, create one.  */
-      if (i == f->header.e_shnum)
-	{
-	  struct obj_section *sec;
-
-	  f->sections = xrealloc(f->sections, (i+1) * sizeof(sec));
-	  f->sections[i] = sec = arch_new_section();
-	  f->header.e_shnum = i+1;
-
-	  memset(sec, 0, sizeof(*sec));
-	  sec->header.sh_type = SHT_PROGBITS;
-	  sec->header.sh_flags = SHF_WRITE|SHF_ALLOC;
-	  sec->name = ".bss";
-	  sec->idx = i;
-	}
-
-      /* Allocate the COMMONS.  */
-      {
-	ElfW(Addr) bss_size = f->sections[i]->header.sh_size;
-	ElfW(Addr) max_align = f->sections[i]->header.sh_addralign;
-	struct common_entry *c;
-
-	for (c = common_head; c ; c = c->next)
-	  {
-	    ElfW(Addr) align = c->sym->value;
-
-	    if (align > max_align)
-	      max_align = align;
-	    if (bss_size & (align - 1))
-	      bss_size = (bss_size | (align - 1)) + 1;
-
-	    c->sym->secidx = i;
-	    c->sym->value = bss_size;
-
-	    bss_size += c->sym->size;
-	  }
-
-	f->sections[i]->header.sh_size = bss_size;
-	f->sections[i]->header.sh_addralign = max_align;
-      }
-    }
-
-  /* For the sake of patch relocation and parameter initialization,
-     allocate zeroed data for NOBITS sections now.  Note that after
-     this we cannot assume NOBITS are really empty.  */
-  for (i = 0; i < f->header.e_shnum; ++i)
-    {
-      struct obj_section *s = f->sections[i];
-      if (s->header.sh_type == SHT_NOBITS)
-	{
-	  if (s->header.sh_size)
-	    s->contents = memset(xmalloc(s->header.sh_size),
-				 0, s->header.sh_size);
-	  else
-	    s->contents = NULL;
-	  s->header.sh_type = SHT_PROGBITS;
-	}
-    }
-}
-
-unsigned long
-obj_load_size (struct obj_file *f)
-{
-  unsigned long dot = 0;
-  struct obj_section *sec;
-
-  /* Finalize the positions of the sections relative to one another.  */
-
-  for (sec = f->load_order; sec ; sec = sec->load_next)
-    {
-      ElfW(Addr) align;
-
-      align = sec->header.sh_addralign;
-      if (align && (dot & (align - 1)))
-	dot = (dot | (align - 1)) + 1;
-
-      sec->header.sh_addr = dot;
-      dot += sec->header.sh_size;
-    }
-
-  return dot;
-}
-
-int
-obj_relocate (struct obj_file *f, ElfW(Addr) base)
-{
-  int i, n = f->header.e_shnum;
-  int ret = 1;
-
-  /* Finalize the addresses of the sections.  */
-
-  arch_finalize_section_address(f, base);
-
-  /* And iterate over all of the relocations.  */
-
-  for (i = 0; i < n; ++i)
-    {
-      struct obj_section *relsec, *symsec, *targsec, *strsec;
-      ElfW(RelM) *rel, *relend;
-      ElfW(Sym) *symtab;
-      const char *strtab;
-
-      relsec = f->sections[i];
-      if (relsec->header.sh_type != SHT_RELM)
-	continue;
-
-      symsec = f->sections[relsec->header.sh_link];
-      targsec = f->sections[relsec->header.sh_info];
-      strsec = f->sections[symsec->header.sh_link];
-
-      rel = (ElfW(RelM) *)relsec->contents;
-      relend = rel + (relsec->header.sh_size / sizeof(ElfW(RelM)));
-      symtab = (ElfW(Sym) *)symsec->contents;
-      strtab = (const char *)strsec->contents;
-
-      for (; rel < relend; ++rel)
-	{
-	  ElfW(Addr) value = 0;
-	  struct obj_symbol *intsym = NULL;
-	  unsigned long symndx;
-	  ElfW(Sym) *extsym = 0;
-	  const char *errmsg;
-
-	  /* Attempt to find a value to use for this relocation.  */
-
-	  symndx = ELFW(R_SYM)(rel->r_info);
-	  if (symndx)
-	    {
-	      /* Note we've already checked for undefined symbols.  */
-
-	      extsym = &symtab[symndx];
-	      if (ELFW(ST_BIND)(extsym->st_info) == STB_LOCAL)
-		{
-		  /* Local symbols we look up in the local table to be sure
-		     we get the one that is really intended.  */
-		  intsym = f->local_symtab[symndx];
-		}
-	      else
-		{
-		  /* Others we look up in the hash table.  */
-		  const char *name;
-		  if (extsym->st_name)
-		    name = strtab + extsym->st_name;
-		  else
-		    name = f->sections[extsym->st_shndx]->name;
-		  intsym = obj_find_symbol(f, name);
-		}
-
-	      value = obj_symbol_final_value(f, intsym);
-	    }
-
-#if SHT_RELM == SHT_RELA
-#if defined(__alpha__) && defined(AXP_BROKEN_GAS)
-	  /* Work around a nasty GAS bug, that is fixed as of 2.7.0.9.  */
-	  if (!extsym || !extsym->st_name ||
-	      ELFW(ST_BIND)(extsym->st_info) != STB_LOCAL)
-#endif
-	  value += rel->r_addend;
-#endif
-
-	  /* Do it! */
-	  switch (arch_apply_relocation(f,targsec,symsec,intsym,rel,value))
-	    {
-	    case obj_reloc_ok:
-	      break;
-
-	    case obj_reloc_overflow:
-	      errmsg = "Relocation overflow";
-	      goto bad_reloc;
-	    case obj_reloc_dangerous:
-	      errmsg = "Dangerous relocation";
-	      goto bad_reloc;
-	    case obj_reloc_unhandled:
-	      errmsg = "Unhandled relocation";
-	      goto bad_reloc;
-	    case obj_reloc_constant_gp:
-	      errmsg = "Modules compiled with -mconstant-gp cannot be loaded";
-	      goto bad_reloc;
-	    bad_reloc:
-	      if (extsym)
-		{
-		  error("%s of type %ld for %s", errmsg,
-			(long)ELFW(R_TYPE)(rel->r_info),
-			strtab + extsym->st_name);
-		}
-	      else
-		{
-		  error("%s of type %ld", errmsg,
-			(long)ELFW(R_TYPE)(rel->r_info));
-		}
-	      ret = 0;
-	      break;
-	    }
-	}
-    }
-
-  /* Finally, take care of the patches.  */
-
-  if (f->string_patches)
-    {
-      struct obj_string_patch_struct *p;
-      struct obj_section *strsec;
-      ElfW(Addr) strsec_base;
-      strsec = obj_find_section(f, ".kstrtab");
-      strsec_base = strsec->header.sh_addr;
-
-      for (p = f->string_patches; p ; p = p->next)
-	{
-	  struct obj_section *targsec = f->sections[p->reloc_secidx];
-	  *(ElfW(Addr) *)(targsec->contents + p->reloc_offset)
-	    = strsec_base + p->string_offset;
-	}
-    }
-
-  if (f->symbol_patches)
-    {
-      struct obj_symbol_patch_struct *p;
-
-      for (p = f->symbol_patches; p; p = p->next)
-	{
-	  struct obj_section *targsec = f->sections[p->reloc_secidx];
-	  *(ElfW(Addr) *)(targsec->contents + p->reloc_offset)
-	    = obj_symbol_final_value(f, p->sym);
-	}
-    }
-
-  return ret;
-}
-
-int
-obj_create_image (struct obj_file *f, char *image)
-{
-  struct obj_section *sec;
-  ElfW(Addr) base = f->baseaddr;
-
-  for (sec = f->load_order; sec ; sec = sec->load_next)
-    {
-      char *secimg;
-
-      if (sec->contents == 0)
-	continue;
-
-      secimg = image + (sec->header.sh_addr - base);
-
-      /* Note that we allocated data for NOBITS sections earlier.  */
-      memcpy(secimg, sec->contents, sec->header.sh_size);
-    }
-
-  return 1;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_s390.c b/mdk-stage1/insmod-modutils/obj/obj_s390.c
deleted file mode 100644
index 3da72e771..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_s390.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/* S/390 specific support for Elf loading and relocation.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct s390_got_entry
-{
-  int offset;
-  unsigned offset_done : 1;
-  unsigned reloc_done : 1;
-};
-
-struct s390_file
-{
-  struct obj_file root;
-  struct obj_section *got;
-};
-
-struct s390_symbol
-{
-  struct obj_symbol root;
-  struct s390_got_entry gotent;
-};
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  struct s390_file *f;
-  f = xmalloc(sizeof(*f));
-  f->got = NULL;
-  return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  struct s390_symbol *sym;
-  sym = xmalloc(sizeof(*sym));
-  memset(&sym->gotent, 0, sizeof(sym->gotent));
-  return &sym->root;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *f,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf32_Rela *rel,
-		       Elf32_Addr v)
-{
-  struct s390_file *ifile = (struct s390_file *)f;
-  struct s390_symbol *isym  = (struct s390_symbol *)sym;
-
-  Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
-  Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-  Elf32_Addr got = ifile->got ? ifile->got->header.sh_addr : 0;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF32_R_TYPE(rel->r_info))
-    {
-    case R_390_NONE:
-      break;
-
-    case R_390_32:
-      *loc += v;
-      break;
-
-    case R_390_PLT32:
-    case R_390_PC32:
-      *loc += v - dot;
-      break;
-
-    case R_390_GLOB_DAT:
-    case R_390_JMP_SLOT:
-      *loc = v;
-      break;
-
-    case R_390_RELATIVE:
-      *loc += f->baseaddr;
-      break;
-
-    case R_390_GOTPC:
-      assert(got != 0);
-      *loc += got - dot;
-      break;
-
-    case R_390_GOT32:
-      assert(isym != NULL);
-      if (!isym->gotent.reloc_done)
-	{
-	  isym->gotent.reloc_done = 1;
-	  *(Elf32_Addr *)(ifile->got->contents + isym->gotent.offset) = v;
-	}
-      *loc += isym->gotent.offset;
-      break;
-
-    case R_390_GOTOFF:
-      assert(got != 0);
-      *loc += v - got;
-      break;
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
-  struct s390_file *ifile = (struct s390_file *)f;
-  int i, n, offset = 0, gotneeded = 0;
-
-  n = ifile->root.header.e_shnum;
-  for (i = 0; i < n; ++i)
-    {
-      struct obj_section *relsec, *symsec, *strsec;
-      Elf32_Rel *rel, *relend;
-      Elf32_Sym *symtab;
-      const char *strtab;
-
-      relsec = ifile->root.sections[i];
-      if (relsec->header.sh_type != SHT_REL)
-	continue;
-
-      symsec = ifile->root.sections[relsec->header.sh_link];
-      strsec = ifile->root.sections[symsec->header.sh_link];
-
-      rel = (Elf32_Rel *)relsec->contents;
-      relend = rel + (relsec->header.sh_size / sizeof(Elf32_Rel));
-      symtab = (Elf32_Sym *)symsec->contents;
-      strtab = (const char *)strsec->contents;
-
-      for (; rel < relend; ++rel)
-	{
-	  Elf32_Sym *extsym;
-	  struct s390_symbol *intsym;
-	  const char *name;
-
-	  switch (ELF32_R_TYPE(rel->r_info))
-	    {
-	    case R_390_GOTPC:
-	    case R_390_GOTOFF:
-	      gotneeded = 1;
-	    default:
-	      continue;
-
-	    case R_390_GOT32:
-	      break;
-	    }
-
-	  extsym = &symtab[ELF32_R_SYM(rel->r_info)];
-	  if (extsym->st_name)
-	    name = strtab + extsym->st_name;
-	  else
-	    name = f->sections[extsym->st_shndx]->name;
-	  intsym = (struct s390_symbol *)obj_find_symbol(&ifile->root, name);
-
-	  if (!intsym->gotent.offset_done)
-	    {
-	      intsym->gotent.offset_done = 1;
-	      intsym->gotent.offset = offset;
-	      offset += 4;
-	    }
-	}
-    }
-
-  if (offset > 0 || gotneeded)
-    ifile->got = obj_create_alloced_section(&ifile->root, ".got", 4, offset);
-
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *m)
-{
-  return 1;
-}
-
-int         
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{    
-  int  i, n = f->header.e_shnum;
-             
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;  
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_sparc.c b/mdk-stage1/insmod-modutils/obj/obj_sparc.c
deleted file mode 100644
index 1a03c9090..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_sparc.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/* Sparc specific support for Elf loading and relocation.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stddef.h>
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  return xmalloc(sizeof(struct obj_file));
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  return xmalloc(sizeof(struct obj_symbol));
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *ef,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf32_Rela *rel,
-		       Elf32_Addr v)
-{
-  Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
-  Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF32_R_TYPE(rel->r_info))
-    {
-    case R_SPARC_NONE:
-      break;
-    case R_SPARC_8:
-      if (v > 0xff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xff) | (v & 0xff);
-      break;
-    case R_SPARC_16:
-      if (v > 0xffff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xffff) | (v & 0xffff);
-      break;
-    case R_SPARC_32:
-      *loc = v;
-      break;
-    case R_SPARC_DISP8:
-      v -= dot;
-      if (v > 0xff)
-        ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xff) | (v & 0xff);
-      break;
-    case R_SPARC_DISP16:
-      v -= dot;
-      if (v > 0xffff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xffff) | (v & 0xffff);
-      break;
-    case R_SPARC_DISP32:
-      v -= dot;
-      *loc = v;
-      break;
-    case R_SPARC_WDISP30:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x3fffffff) | (v >> 2);
-      break;
-    case R_SPARC_WDISP22:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x3fffff) | ((v >> 2) & 0x3fffff);
-      break;
-    case R_SPARC_HI22:
-      *loc = (*loc & ~0x3fffff) | (v >> 10);
-      break;
-    case R_SPARC_22:
-      if (v > 0x3fffff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x3fffff) | (v & 0x3fffff);
-      break;
-    case R_SPARC_13:
-      if (v > 0x1fff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x1fff) | (v & 0x1fff);
-      break;
-    case R_SPARC_LO10:
-      *loc = (*loc & ~0x3ff) | (v & 0x3ff);
-      break;
-
-    case R_SPARC_PC10:
-      v -= dot;
-      *loc = (*loc & ~0x3ff) | (v & 0x3ff);
-      break;
-    case R_SPARC_PC22:
-      v -= dot;
-      *loc = (*loc & ~0x3fffff) | (v >> 10);
-      break;
-
-    case R_SPARC_UA32:
-      *(((char *)loc) + 0) = (char)(v >> 24);
-      *(((char *)loc) + 1) = (char)(v >> 16);
-      *(((char *)loc) + 2) = (char)(v >> 8);
-      *(((char *)loc) + 3) = (char)v;
-      break;
-
-#ifdef R_SPARC_10
-    case R_SPARC_10:
-      if (v > 0x3ff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x3ff) | (v & 0x3ff);
-      break;
-    case R_SPARC_11:
-      if (v > 0x7ff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x7ff) | (v & 0x7ff);
-      break;
-    case R_SPARC_WDISP16:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x303fff) | ((v << 4) & 0x300000) | ((v >> 2) & 0x3fff);
-      break;
-    case R_SPARC_WDISP19:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x7ffff) | ((v >> 2) & 0x7ffff);
-      break;
-    case R_SPARC_7:
-      if (v > 0x7f)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x7f) | (v & 0x7f);
-      break;
-    case R_SPARC_5:
-      if (v > 0x1f)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x1f) | (v & 0x1f);
-      break;
-    case R_SPARC_6:
-      if (v > 0x3f)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x3f) | (v & 0x3f);
-      break;
-#endif /* R_SPARC_10 */
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *ef)
-{
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_sparc64.c b/mdk-stage1/insmod-modutils/obj/obj_sparc64.c
deleted file mode 100644
index 84e8d18a0..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_sparc64.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/* Sparc64 specific support for Elf loading and relocation.
-   Copyright 1997 Linux International.
-
-   Contributed by Jakub Jelinek <jj@sunsite.mff.cuni.cz>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stddef.h>
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  return xmalloc(sizeof(struct obj_file));
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  return xmalloc(sizeof(struct obj_symbol));
-}
-
-#ifdef BROKEN_SPARC64_RELOCS
-
-#undef R_SPARC_PLT32
-#undef R_SPARC_HIPLT22
-#undef R_SPARC_LOPLT10
-#undef R_SPARC_PCPLT32
-#undef R_SPARC_PCPLT22
-#undef R_SPARC_PCPLT10
-#undef R_SPARC_10
-#undef R_SPARC_11
-#undef R_SPARC_64
-#undef R_SPARC_OLO10
-#undef R_SPARC_HH22
-#undef R_SPARC_HM10
-#undef R_SPARC_LM22
-#undef R_SPARC_PC_HH22
-#undef R_SPARC_PC_HM10
-#undef R_SPARC_PC_LM22
-#undef R_SPARC_WDISP16
-#undef R_SPARC_WDISP19
-#undef R_SPARC_GLOB_JMP
-#undef R_SPARC_7
-#undef R_SPARC_5
-#undef R_SPARC_6
-
-#define R_SPARC_10		24
-#define R_SPARC_11		25
-#define R_SPARC_64		26
-#define R_SPARC_OLO10		27
-#define R_SPARC_HH22		28
-#define R_SPARC_HM10		29
-#define R_SPARC_LM22		30
-#define R_SPARC_PC_HH22		31
-#define R_SPARC_PC_HM10		32
-#define R_SPARC_PC_LM22		33
-#define R_SPARC_WDISP16		34
-#define R_SPARC_WDISP19		35
-#define R_SPARC_GLOB_JMP	36
-#define R_SPARC_7		37
-#define R_SPARC_5		38
-#define R_SPARC_6		39
-
-#else
-
-#ifndef R_SPARC_64
-
-#define R_SPARC_64		32
-#define R_SPARC_OLO10		33
-#define R_SPARC_HH22		34
-#define R_SPARC_HM10		35
-#define R_SPARC_LM22		36
-#define R_SPARC_PC_HH22		37
-#define R_SPARC_PC_HM10		38
-#define R_SPARC_PC_LM22		39
-
-#endif
-
-#endif
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-#define ELF64_R_TYPE_ID(info)	((info) & 0xff)
-#define ELF64_R_TYPE_DATA(info) ((info) >> 8)
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *ef,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf64_Rela *rel,
-		       Elf64_Addr v)
-{
-  unsigned int *loc = (unsigned int *)(targsec->contents + rel->r_offset);
-  unsigned int dot = targsec->header.sh_addr + rel->r_offset;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF64_R_TYPE_ID(rel->r_info))
-    {
-    case R_SPARC_NONE:
-      break;
-
-    case R_SPARC_64:
-    case R_SPARC_UA64:
-      if (! ((long) loc & 3)) {
-	/* Common in .eh_frame */
-	((unsigned int *) loc) [0] = v >> 32;
-	((unsigned int *) loc) [1] = v;
-	break;
-      }
-      ((unsigned char *) loc) [0] = v >> 56;
-      ((unsigned char *) loc) [1] = v >> 48;
-      ((unsigned char *) loc) [2] = v >> 40;
-      ((unsigned char *) loc) [3] = v >> 32;
-      ((unsigned char *) loc) [4] = v >> 24;
-      ((unsigned char *) loc) [5] = v >> 16;
-      ((unsigned char *) loc) [6] = v >> 8;
-      ((unsigned char *) loc) [7] = v;
-      break;
-    case R_SPARC_32:
-    case R_SPARC_UA32:
-      if (! ((long) loc & 3)) {
-	*loc = v;
-	break;
-      }
-      ((unsigned char *) loc) [0] = v >> 24;
-      ((unsigned char *) loc) [1] = v >> 16;
-      ((unsigned char *) loc) [2] = v >> 8;
-      ((unsigned char *) loc) [3] = v;
-      break;
-    case R_SPARC_16:
-      if (v > 0xffff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xffff) | (v & 0xffff);
-      break;
-    case R_SPARC_8:
-      if (v > 0xff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xff) | (v & 0xff);
-      break;
-
-    case R_SPARC_DISP32:
-      v -= dot;
-      *loc = v;
-      break;
-    case R_SPARC_DISP16:
-      v -= dot;
-      if (v > 0xffff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xffff) | (v & 0xffff);
-      break;
-    case R_SPARC_DISP8:
-      v -= dot;
-      if (v > 0xff)
-        ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xff) | (v & 0xff);
-      break;
-    case R_SPARC_WDISP30:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x3fffffff) | ((v >> 2) & 0x3fffffff);
-      break;
-
-    /* MEDLOW code model relocs */
-    case R_SPARC_LO10:
-      *loc = (*loc & ~0x3ff) | (v & 0x3ff);
-      break;
-    case R_SPARC_HI22:
-      *loc = (*loc & ~0x3fffff) | (v >> 10);
-      break;
-    case R_SPARC_OLO10:
-      *loc = (*loc & ~0x1fff) | (((v & 0x3ff) + ELF64_R_TYPE_DATA (rel->r_info)) & 0x1fff);
-      break;
-
-    /* MEDMID code model relocs */
-    case R_SPARC_H44:
-      *loc = (*loc & ~0x3fffff) | (v >> 22);
-      break;
-    case R_SPARC_M44:
-      *loc = (*loc & ~0x3ff) | ((v >> 12) & 0x3ff);
-      break;
-    case R_SPARC_L44:
-      *loc = (*loc & ~0xfff) | (v & 0xfff);
-      break;
-
-    /* MEDANY code model relocs */
-    case R_SPARC_HH22:
-      *loc = (*loc & ~0x3fffff) | (v >> 42);
-      break;
-    case R_SPARC_HM10:
-      *loc = (*loc & ~0x3ff) | ((v >> 32) & 0x3ff);
-      break;
-    case R_SPARC_LM22:
-      *loc = (*loc & ~0x3fffff) | ((v >> 10) & 0x3fffff);
-      break;
-
-    case R_SPARC_WDISP22:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x3fffff) | ((v >> 2) & 0x3fffff);
-      break;
-    case R_SPARC_22:
-      if (v > 0x3fffff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x3fffff) | (v & 0x3fffff);
-      break;
-    case R_SPARC_13:
-      if (v > 0x1fff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x1fff) | (v & 0x1fff);
-      break;
-
-    case R_SPARC_PC10:
-      v -= dot;
-      *loc = (*loc & ~0x3ff) | (v & 0x3ff);
-      break;
-    case R_SPARC_PC22:
-      v -= dot;
-      *loc = (*loc & ~0x3fffff) | ((v >> 10) & 0x3fffff);
-      break;
-
-#ifdef R_SPARC_10
-    case R_SPARC_10:
-      if (v > 0x3ff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x3ff) | (v & 0x3ff);
-      break;
-    case R_SPARC_11:
-      if (v > 0x7ff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x7ff) | (v & 0x7ff);
-      break;
-
-#ifdef R_SPARC_64
-    case R_SPARC_PC_HH22:
-      v -= dot;
-      *loc = (*loc & ~0x3fffff) | (v >> 42);
-      break;
-    case R_SPARC_PC_HM10:
-      v -= dot;
-      *loc = (*loc & ~0x3ff) | ((v >> 32) & 0x3ff);
-      break;
-    case R_SPARC_PC_LM22:
-      v -= dot;
-      *loc = (*loc & ~0x3fffff) | ((v >> 10) & 0x3fffff);
-      break;
-#endif
-
-    case R_SPARC_WDISP16:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x303fff) | ((v << 4) & 0x300000) | ((v >> 2) & 0x3fff);
-      break;
-    case R_SPARC_WDISP19:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x7ffff) | ((v >> 2) & 0x7ffff);
-      break;
-    case R_SPARC_7:
-      if (v > 0x7f)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x7f) | (v & 0x7f);
-      break;
-    case R_SPARC_5:
-      if (v > 0x1f)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x1f) | (v & 0x1f);
-      break;
-    case R_SPARC_6:
-      if (v > 0x3f)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x3f) | (v & 0x3f);
-      break;
-#endif /* R_SPARC_10 */
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *ef)
-{
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf64_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/util/Makefile b/mdk-stage1/insmod-modutils/util/Makefile
deleted file mode 100644
index 763f046f2..000000000
--- a/mdk-stage1/insmod-modutils/util/Makefile
+++ /dev/null
@@ -1,42 +0,0 @@
- #******************************************************************************
- #
- #    insmod from modutils (generic)
- #
- # $Id$
- #
- # Copyright 1996, 1997 Linux International.
- #
- #*****************************************************************************
-
-top_dir = ../..
-
-include $(top_dir)/Makefile.common
-
-
-all: libutil.a libutil-STANDALONE.a #libutil-DIET.a
-
-clean:
-	rm -f *.o *.a
-
-
-INCS = -I./../include
-
-DEFS = -Wno-error -D_GNU_SOURCE -DELF_MACHINE_H='"elf_$(ARCH).h"' -DARCH_$(ARCH) -DHAVE_WORDEXP=1 -DHAVE_GLOB=1 -DCONFIG_ROOT_CHECK_OFF=0
-
-
-OBJS = xmalloc.o xrealloc.o xstrcat.o xstrdup.o xsystem.o xftw.o \
-        modstat.o meta_expand.o config.o snap_shot.o arch64.o gzfiles.o sys_nim.o sys_oim.o
-
-libutil.a: $(OBJS) logger.o
-	ar cru $@ $^
-	ranlib $@
-
-libutil-STANDALONE.a: $(OBJS) logger-standalone.o
-	ar cru $@ $^
-	ranlib $@
-
-logger-standalone.o: logger.c
-	gcc $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -o $@ -D_STANDALONE_ -c logger.c
-
-.c.o:
-	gcc $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -c $<
diff --git a/mdk-stage1/insmod-modutils/util/alias.h b/mdk-stage1/insmod-modutils/util/alias.h
deleted file mode 100644
index c925a04f3..000000000
--- a/mdk-stage1/insmod-modutils/util/alias.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * This file is split out from config.c for easier editing
- */
-
-/*
- * tbpath and tbtype are used to build the complete set of paths for finding
- * modules, but only when we search for individual directories, they are not
- * used for [boot] and [toplevel] searches.
- */
-static char *tbpath[] =
-{
-	"/lib/modules",
-	NULL			/* marks the end of the list! */
-};
-
-char *tbtype[] =
-{
-	"kernel",		/* as of 2.3.14 this must be first */
-	"fs",
-	"net",
-	"scsi",
-	"block",
-	"cdrom",
-	"ipv4",
-	"ipv6",
-	"sound",
-	"fc4",
-	"video",
-	"misc",
-	"pcmcia",
-	"atm",
-	"usb",
-	"ide",
-	"ieee1394",
-	"mtd",
-	NULL			/* marks the end of the list! */
-};
-
-/*
- * This is the list of pre-defined aliases.
- * Each entry can be overridden by an entry in /etc/modules.conf
- */
-char *aliaslist[] =
-{
-	"binfmt-204 binfmt_aout",
-	"binfmt-263 binfmt_aout",
-	"binfmt-264 binfmt_aout",
-	"binfmt-267 binfmt_aout",
-	"binfmt-387 binfmt_aout",
-	"binfmt-332 iBCS",
-	"binfmt--310 binfmt_java",
-
-	"block-major-1 rd",
-	"block-major-2 floppy",
-	"block-major-3 ide-probe-mod",
-	"block-major-7 loop",
-	"block-major-8 sd_mod",
-	"block-major-9 md", /* For modular RAID */
-	"block-major-11 sr_mod",
-	"block-major-13 xd",
-	"block-major-15 cdu31a",
-	"block-major-16 gscd",
-	"block-major-17 optcd",
-	"block-major-18 sjcd",
-	"block-major-20 mcdx",
-	"block-major-22 ide-probe-mod",
-	"block-major-23 mcd",
-	"block-major-24 sonycd535",
-	"block-major-25 sbpcd",
-	"block-major-26 sbpcd",
-	"block-major-27 sbpcd",
-	"block-major-29 aztcd",
-	"block-major-32 cm206",
-	"block-major-33 ide-probe-mod",
-	"block-major-34 ide-probe-mod",
-	"block-major-37 ide-tape",
-	"block-major-44 ftl",		/* from David Woodhouse <dwmw2@infradead.org> */
-	"block-major-56 ide-probe-mod",
-	"block-major-57 ide-probe-mod",
-	"block-major-88 ide-probe-mod",
-	"block-major-89 ide-probe-mod",
-	"block-major-90 ide-probe-mod",
-	"block-major-91 ide-probe-mod",
-	"block-major-93 nftl",		/* from David Woodhouse <dwmw2@infradead.org> */
-
-	"char-major-4 serial",
-	"char-major-5 serial",
-	"char-major-6 lp",
-	"char-major-9 st",
-	"char-major-10 off",		/* was: mouse, was: misc */
-	"char-major-10-0 busmouse",	/* /dev/logibm Logitech bus mouse */
-	"char-major-10-1 off",		/* /dev/psaux PS/2-style mouse port */
-	"char-major-10-2 msbusmouse",	/* /dev/inportbm Microsoft Inport bus mouse */
-	"char-major-10-3 atixlmouse",	/* /dev/atibm ATI XL bus mouse */
-					/* /dev/jbm J-mouse */
-					/* /dev/amigamouse Amiga mouse (68k/Amiga) */
-					/* /dev/atarimouse Atari mouse */
-					/* /dev/sunmouse Sun mouse */
-					/* /dev/beep Fancy beep device */
-					/* /dev/modreq Kernel module load request */
-	"char-major-10-130 wdt",	/* /dev/watchdog Watchdog timer port */
-	"char-major-10-131 wdt",	/* /dev/temperature Machine internal temperature */
-					/* /dev/hwtrap Hardware fault trap */
-					/* /dev/exttrp External device trap */
-	"char-major-10-135 off",	/* rtc cannot be compiled as a module */
-	"char-major-10-139 openprom",	/* /dev/openprom Linux/Sparc interface */
-	"char-major-10-144 nvram",	/* from Tigran Aivazian <tigran@sco.COM> */
-	"char-major-10-157 applicom",	/* from David Woodhouse <dwmw2@infradead.org> */
-	"char-major-10-175 agpgart",    /* /dev/agpgart GART AGP mapping access */
-	"char-major-10-184 microcode",	/* Tigran Aivazian <tigran@veritas.com> */
-
-	"char-major-14 soundcore",
-	"char-major-19 cyclades",
-	"char-major-20 cyclades",
-	"char-major-21 sg",
-	"char-major-22 pcxx", /* ?? */
-	"char-major-23 pcxx", /* ?? */
-	"char-major-27 ftape",
-	"char-major-34 scc",
-	"char-major-35 tclmidi",
-	"char-major-36 netlink",
-	"char-major-37 ide-tape",
-	"char-major-48 riscom8",
-	"char-major-49 riscom8",
-	"char-major-57 esp",
-	"char-major-58 esp",
-	"char-major-63 kdebug",
-	"char-major-90 mtdchar",	/* from David Woodhouse <dwmw2@infradead.org> */
-	"char-major-99 ppdev",
-	"char-major-107 3dfx", /* from Tigran Aivazian <tigran@sco.COM> */
-	"char-major-161 ircomm-tty",
-
-	"dos msdos",
-	"dummy0 dummy",
-	"dummy1 dummy",
-	"eth0 off",
-	"iso9660 isofs",
-	"md-personality-1 linear",
-	"md-personality-2 raid0",
-        "md-personality-3 raid1",
-        "md-personality-4 raid5",
-
-	"net-pf-1 unix",	/* PF_UNIX	1  Unix domain sockets */
-	"net-pf-2 ipv4",	/* PF_INET	2  Internet IP Protocol */
-	"net-pf-3 off",		/* PF_AX25	3  Amateur Radio AX.25 */
-	"net-pf-4 ipx",		/* PF_IPX	4  Novell IPX */
-	"net-pf-5 appletalk",	/* PF_APPLETALK	5  Appletalk DDP */
-	"net-pf-6 off",		/* PF_NETROM	6  Amateur radio NetROM */
-				/* PF_BRIDGE	7  Multiprotocol bridge */
-				/* PF_AAL5	8  Reserved for Werner's ATM */
-				/* PF_X25	9  Reserved for X.25 project */
-				/* PF_INET6	10 IP version 6 */
-
-	/* next two from <dairiki@matthews.dairiki.org>  Thanks! */
-	"net-pf-17 af_packet",
-	"net-pf-19 off",	/* acorn econet */
-
-	"netalias-2 ip_alias",
-	"plip0 plip",
-	"plip1 plip",
-	"cipcb0 cipcb",
-	"cipcb1 cipcb",
-	"cipcb2 cipcb",
-	"cipcb3 cipcb",
-	"ppp0 ppp",
-	"ppp1 ppp",
-	"scsi_hostadapter off",	/* if not in config file */
-	"slip0 slip",
-	"slip1 slip",
-	"tty-ldisc-1 slip",
-	"tty-ldisc-3 ppp",
-	"ppp-compress-21 bsd_comp",
-	"ppp-compress-24 ppp_deflate",
-	"ppp-compress-26 ppp_deflate",
-
-#ifndef __sparc__
-	"parport_lowlevel parport_pc",
-#else
-        "parport_lowlevel parport_ax",
-#endif
-
-	"tty-ldisc-11 irtty",
-
-	"usbdevfs usbcore",
-
-	NULL			/* marks the end of the list! */
-};
-
-/*
- * This is the list of pre-defined options.
- * Each entry can be overridden by an entry in /etc/modules.conf
- */
-char *optlist[] =
-{
-	"dummy0 -o dummy0",
-	"dummy1 -o dummy1",
-	"sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330",
-	NULL			/* marks the end of the list! */
-};
-
-/*
- * This is the list of pre-defined "above"s,
- * used for pull-in of additional modules
- * Each entry can be overridden by an entry in /etc/modules.conf
- */
-char *above[] =
-{
-	NULL			/* marks the end of the list! */
-};
-
-/*
- * This is the list of pre-defined "below"s,
- * used for push-in of additional modules
- * Each entry can be overridden by an entry in /etc/modules.conf
- */
-char *below[] =
-{
-	NULL			/* marks the end of the list! */
-};
-
-/*
- * This is the list of pre-defined "prune"s,
- * used to exclude paths from scan of /lib/modules.
- * /etc/modules.conf can add entries but not remove them.
- */
-char *prune[] =
-{
-        ".rhkmvtag",
-	"modules.dep",
-	"modules.generic_string",
-	"modules.pcimap",
-	"modules.isapnpmap",
-	"modules.usbmap",
-	"modules.parportmap",
-	"System.map",
-	".config",
-	"build",		/* symlink to source tree */
-	"vmlinux",
-	"vmlinuz",
-	"bzImage",
-	"zImage",
-	".rhkmvtag",		/* wish RedHat had told me before they did this */
-	NULL			/* marks the end of the list! */
-};
diff --git a/mdk-stage1/insmod-modutils/util/arch64.c b/mdk-stage1/insmod-modutils/util/arch64.c
deleted file mode 100644
index 4d5ace223..000000000
--- a/mdk-stage1/insmod-modutils/util/arch64.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Misc utility functions.
-   Copyright 1996, 1997 Linux International.
-   Written by Keith Owens <kaos@ocs.com.au>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <string.h>
-#include <sys/utsname.h>
-#include "util.h"
-
-/*======================================================================*/
-
-/* Indicate if the current machine uses 64 bit architecture */
-int arch64(void)
-{
-	struct utsname u;
-	return(!uname(&u) && strstr(u.machine, "64"));
-}
diff --git a/mdk-stage1/insmod-modutils/util/config.c b/mdk-stage1/insmod-modutils/util/config.c
deleted file mode 100644
index a860920f6..000000000
--- a/mdk-stage1/insmod-modutils/util/config.c
+++ /dev/null
@@ -1,1591 +0,0 @@
-/*
- * Handle the configuration, including /etc/modules.conf
- *
- * Copyright 1994, 1995, 1996, 1997:
- *	Jacques Gelinas <jack@solucorp.qc.ca>
- *	Bj�rn Ekwall <bj0rn@blox.se> February 1999
- *	Keith Owens <kaos@ocs.com.au> October 1999
- *
- * "kernelversion" idea from the Debian release via:
- *      Wichert Akkerman <wakkerma@cs.leidenuniv.nl>
- *
- * Bj�rn, inspired by Richard Henderson <rth@twiddle.net>, cleaned up
- * the wildcard handling and started using ftw in March 1999
- * Cleanup of hardcoded arrays: Bj�rn Ekwall <bj0rn@blox.se> March 1999
- * Many additional keywords: Bj�rn Ekwall <bj0rn@blox.se> (C) March 1999
- * Standardize on /etc/modules.conf Keith Owens <kaos@ocs.com.au> October 1999
- *
- * Alpha typecast:Michal Jaegermann <michal@ellpspace.math.ualberta.ca>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- * Specification: /etc/modules.conf / format
- *	Modules may be located at different places in the filesystem.
- *
- *	The file /etc/modules.conf contains different definitions to
- *	control the manipulation of modules.
- *
- *	Standard Unix style comments and continuation line are supported.
- *	Comments begin with a # and continue until the end of the line.
- *	A line continues on the next one if the last non-white character
- *	is a \.
- */
-/* #Specification: /etc/modules.conf / format / official name */
-
-#include <stdio.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <ctype.h>
-#include <sys/stat.h>
-#include <signal.h>
-#include <limits.h>
-#include <sys/param.h>
-#include <errno.h>
-
-#include "util.h"
-#include "config.h"
-#include "alias.h"
-
-int flag_autoclean; /* set/used by modprobe and insmod */
-
-struct utsname uts_info;
-
-struct PATH_TYPE *modpath;
-int nmodpath = 0;
-static int maxpath = 0;
-
-struct EXEC_TYPE *execs;
-int nexecs = 0;
-static int maxexecs = 0;
-
-OPT_LIST *opt_list;
-static int n_opt_list;
-
-OPT_LIST *abovelist;
-static int n_abovelist;
-
-OPT_LIST *belowlist;
-static int n_belowlist;
-
-OPT_LIST *prunelist;
-static int n_prunelist;
-
-OPT_LIST *probe_list;
-static int n_probe_list;
-
-OPT_LIST *probeall_list;
-static int n_probeall_list;
-
-OPT_LIST *aliases;
-static int n_aliases;
-
-char *persistdir = "/var/lib/modules/persist";
-
-const char symprefix[] = SYMPREFIX;
-
-char *insmod_opt = NULL;
-char *config_file = NULL;	/* Which file was actually used */
-time_t config_mtime;
-int root_check_off = CONFIG_ROOT_CHECK_OFF;	/* Default is modules must be owned by root */
-static char *config_version;	/* Hack for config_add */
-int quick = 0;			/* Option -A */
-
-/* The initialization order must match the gen_file_enum order in config.h */
-struct gen_files gen_file[] = {
-	{"generic_string", NULL, 0},
-	{"pcimap", NULL, 0},
-	{"isapnpmap", NULL, 0},
-	{"usbmap", NULL, 0},
-	{"parportmap", NULL, 0},
-	{"dep", NULL, 0},
-};
-
-const int gen_file_count = sizeof(gen_file)/sizeof(gen_file[0]);
-
-int flag_verbose;
-
-unsigned long safemode;
-
-void verbose(const char *ctl,...)
-{
-	if (flag_verbose) {
-		va_list list;
-		va_start(list, ctl);
-		vprintf(ctl, list);
-		va_end(list); 
-		fflush(stdout);
-	}
-}
-
-
-/*
- *	Check to see if the existing modules.xxx files need updating,
- *	based on the timestamps of the modules and the config file.
- */
-static int check_update (const char *file, const struct stat *sb)
-{
-	int len = strlen(file);
-	int i;
-
-	if (!S_ISREG(sb->st_mode))
-		return 0;
-	for (i = 0; i < gen_file_count; ++i) {
-		if (sb->st_mtime > gen_file[i].mtime)
-			break;
-	}
-	if (i == gen_file_count)
-		return 0;	/* All generated files are up to date */
-
-	if (len > 2 && !strcmp(file + len - 2, ".o"))
-		return 1;
-	else if (len > 4 && !strcmp(file + len - 4, ".mod"))
-		return 1;
-#ifdef CONFIG_USE_ZLIB
-	else if (len > 5 && !strcmp(file + len - 5, ".o.gz"))
-		return 1;
-#endif
-	return 0;
-}
-
-static int need_update (const char *force_ver, const char *base_dir)
-{
-	struct stat tmp;
-	char dep[PATH_MAX];
-	int i;
-	uname (&uts_info);
-	if (!force_ver)
-		force_ver = uts_info.release;
-
-	if (strlen (force_ver) > 50)
-		/* That's just silly. */
-		return 1;
-
-	for (i = 0; i < gen_file_count; ++i) {
-		if (stat(gen_file[i].name, &tmp))
-			return 1;	/* No dependency file yet, so we need to build it. */
-		gen_file[i].mtime = tmp.st_mtime;
-	}
-
-	if (stat ("/etc/modules.conf", &tmp) &&
-	    stat ("/etc/conf.modules", &tmp))
-		return 1;
-
-	for (i = 0; i < gen_file_count; ++i) {
-		if (tmp.st_mtime > gen_file[i].mtime)
-			return 1;	/* Config file is newer. */
-	}
-
-	snprintf (dep, sizeof(dep), "%s/lib/modules/%s", base_dir, force_ver);
-	return xftw (dep, check_update);
-}
-
-
-/*
- *	Strip white char at the end of a string.
- *	Return the address of the last non white char + 1 (point on the '\0').
- */
-static char *strip_end(char *str)
-{
-	int len = strlen(str);
-
-	for (str += len - 1; len > 0 && (isspace(*str)); --len, --str)
-		*str = '\0';
-	return str + 1;
-}
-
-/*
- *	Read a line of a configuration file and process continuation lines.
- *	Return buf, or NULL if EOF.
- *	Blank at the end of line are always stripped.
- *	Everything on a line following comchar is a comment.
- *
- *	Continuation character is \
- *	Comment character is #
- */
-char *fgets_strip(char *buf, int sizebuf, FILE * fin, int *lineno)
-{
-	int nocomment = 1; /* No comments found ? */
-	int contline = 0;
-	char *start = buf;
-	char *ret = NULL;
-	char comchar = '#';
-	char contchar = '\\';
-
-	*buf = '\0';
-
-	while (fgets(buf, sizebuf, fin) != NULL) {
-		char *end = strip_end(buf);
-		char *pt = strchr(buf, comchar);
-
-		if (pt != NULL) {
-			nocomment = 0;
-			*pt = '\0';
-			end = strip_end(buf);
-		}
-
-		if (lineno != NULL)
-			(*lineno)++;
-		ret = start;
-		if (contline) {
-			char *pt = buf;
-
-			while (isspace(*pt))
-				pt++;
-			if (pt > buf + 1) {
-				strcpy(buf + 1, pt);	/* safe, backward copy */
-				buf[0] = ' ';
-				end -= (int) (pt - buf) - 1;
-			} else if (pt == buf + 1) {
-				buf[0] = ' ';
-			}
-		}
-		if (end > buf && *(end - 1) == contchar) {
-			if (end == buf + 1 || *(end - 2) != contchar) {
-				/* Continuation */
-				contline = 1;
-				end--;
-				*end = '\0';
-				buf = end;
-			} else {
-				*(end - 1) = '\0';
-				break;
-			}
-		} else {
-			break;
-		}
-	}
-
-	return ret;
-}
-
-static char *next_word(char *pt)
-{
-	char *match;
-	char *pt2;
-
-	/* find end of word */
-	for (pt2 = pt; *pt2 && !(isspace(*pt2)); ++pt2) {
-		if ((match = strchr("\"'`", *pt2)) != NULL) {
-			for (++pt2; *pt2 && *pt2 != *match; ++pt2) {
-				if (*pt2 == '\\' && *(pt2 + 1) == *match)
-					++pt2;
-			}
-		}
-	}
-
-	/* skip leading whitespace before next word */
-	if (*pt2) {
-		*pt2++ = '\0'; /* terminate last word */
-		while (*pt2 && isspace(*pt2))
-			++pt2;
-	}
-	return pt2;
-}
-
-static GLOB_LIST *addlist(GLOB_LIST *orig, GLOB_LIST *add)
-{
-	if (!orig)
-		return add;
-	/* else */
-	orig->pathv = (char **)xrealloc(orig->pathv,
-					(orig->pathc + add->pathc + 1) *
-					sizeof(char *));
-	memcpy(orig->pathv + orig->pathc, add->pathv,
-	       add->pathc * sizeof(char *));
-	orig->pathc += add->pathc;
-	orig->pathv[orig->pathc] = NULL;
-	/*
-	free(add->pathv);
-	free(add);
-	*/
-	return orig;
-}
-
-static void decode_list(int *n, OPT_LIST **list, char *arg, int adding,
-			char *version, int opts)
-{
-	GLOB_LIST *pg;
-	GLOB_LIST *prevlist = NULL;
-	int i, autoclean = 1;
-	int where = *n;
-	char *arg2 = next_word(arg);
-
-	if (opts && !strcmp (arg, "-k")) {
-		if (!*arg2)
-			error("Missing module argument after -k\n");
-		arg = arg2;
-		arg2 = next_word(arg);
-		autoclean = 0;
-	}
-
-	for (i = 0; i < *n; ++i) {
-		if (strcmp((*list)[i].name, arg) == 0) {
-			if (adding)
-				prevlist = (*list)[i].opts;
-			else
-				free((*list)[i].opts);
-			(*list)[i].opts = NULL;
-			where = i;
-			break;
-		}
-	}
-	if (where == *n) {
-		(*list) = (OPT_LIST *)xrealloc((*list),
-			  (*n + 2) * sizeof(OPT_LIST));
-		(*list)[*n].name = xstrdup(arg);
-		(*list)[*n].autoclean = autoclean;
-		*n += 1;
-		memset(&(*list)[*n], 0, sizeof(OPT_LIST));
-	} else if (!autoclean)
-		(*list)[where].autoclean = 0;
-	pg = (GLOB_LIST *)xmalloc(sizeof(GLOB_LIST));
-	meta_expand(arg2, pg, NULL, version, ME_ALL);
-	(*list)[where].opts = addlist(prevlist, pg);
-}
-
-static void decode_exec(char *arg, int type)
-{
-	char *arg2;
-
-	execs[nexecs].when = type;
-	arg2 = next_word(arg);
-	execs[nexecs].module = xstrdup(arg);
-	execs[nexecs].cmd = xstrdup(arg2);
-	if (++nexecs >= maxexecs) {
-		maxexecs += 10;
-		execs = (struct EXEC_TYPE *)xrealloc(execs,
-			maxexecs * sizeof(struct EXEC_TYPE));
-	}
-}
-
-static int build_list(char **in, OPT_LIST **out, char *version, int opts)
-{
-	GLOB_LIST *pg;
-	int i;
-
-	for (i = 0; in[i]; ++i) {
-		char *p = xstrdup(in[i]);
-		char *pt = next_word(p);
-		char *pn = p;
-
-		*out = (OPT_LIST *)xrealloc(*out, (i + 2) * sizeof(OPT_LIST));
-		(*out)[i].autoclean = 1;
-		if (opts && !strcmp (p, "-k")) {
-		    pn = pt;
-		    pt = next_word(pn);
-		    (*out)[i].autoclean = 0;
-		}
-		pg = (GLOB_LIST *)xmalloc(sizeof(GLOB_LIST));
-		meta_expand(pt, pg, NULL, version, ME_ALL);
-		(*out)[i].name = xstrdup(pn);
-		(*out)[i].opts = pg;
-		free(p);
-	}
-	memset(&(*out)[i], 0, sizeof(OPT_LIST));
-
-	return i;
-}
-
-/* Environment variables can override defaults, testing only */
-static void gen_file_env(struct gen_files *gf)
-{
-	if (!safemode) {
-		char *e = xmalloc(strlen(gf->base)+5), *p1 = gf->base, *p2 = e;
-		while ((*p2++ = toupper(*p1++))) ;
-		strcpy(p2-1, "PATH");	/* safe, xmalloc */
-		if ((p2 = getenv(e)) != NULL) {
-			free(gf->name);
-			gf->name = xstrdup(p2);
-		}
-		free(e);
-	}
-}
-
-/* Read a config option for a generated filename */
-static int gen_file_conf(struct gen_files *gf, int assgn, const char *parm, const char *arg)
-{
-
-	int l = strlen(gf->base);
-	if (assgn &&
-	    strncmp(parm, gf->base, l) == 0 &&
-	    strcmp(parm+l, "file") == 0 &&
-	    !gf->name) {
-		gf->name = xstrdup(arg);
-		return(0);
-	}
-	return(1);
-}
-
-/* Check we have a name for a generated file */
-static int gen_file_check(struct gen_files *gf, GLOB_LIST *g,
-			  char *base_dir, char *version)
-{
-	char tmp[PATH_MAX];
-	int ret = 0;
-	if (!gf->name) {
-		/*
-		 * Specification: config file / no xxxfile parameter
-		 * The default value for generated filename xxx is:
-		 *
-		 * xxxfile=/lib/modules/`uname -r`/modules.xxx
-		 *
-		 * If the config file exists but lacks an xxxfile
-		 * specification, the default value is used since
-		 * the system can't work without one.
-		 */
-		snprintf(tmp, sizeof(tmp), "%s/lib/modules/%s/modules.%s",
-			base_dir, version, gf->base);
-		gf->name = xstrdup(tmp);
-	} else { /* xxxfile defined in modules.conf */
-		/*
-		 * If we have a xxxfile definition in the configuration file
-		 * we must resolve any shell meta-chars in its value.
-		 */
-		if (meta_expand(gf->name, g, base_dir, version, ME_ALL))
-			ret = -1;
-		else if (!g->pathv || g->pathv[0] == NULL)
-			ret = -1;
-		else {
-			free(gf->name);
-			gf->name = xstrdup(g->pathv[0]);
-		}
-	}
-	return(ret);
-}
-
-/*
- *	Read the configuration file.
- *	If parameter "all" == 0 then ignore everything except path info
- *	Return -1 if any error.
- *	Error messages generated.
- */
-static int do_read(int all, char *force_ver, char *base_dir, char *conf_file, int depth)
-{
-	#define MAX_LEVEL 20
-	FILE *fin;
-	GLOB_LIST g;
-	int i;
-	int assgn;
-	int drop_default_paths = 1;
-	int lineno = 0;
-	int ret = 0;
-	int state[MAX_LEVEL + 1]; /* nested "if" */
-	int level = 0;
-	char buf[3000];
-	char tmpline[100];
-	char **pathp;
-	char *envpath;
-	char *version;
-	char *type;
-	char **glb;
-	char old_name[] = "/etc/conf.modules";
-	int conf_file_specified = 0;
-
-	/*
-	 * The configuration file is optional.
-	 * No error is printed if it is missing.
-	 * If it is missing the following content is assumed.
-	 *
-	 * path[boot]=/lib/modules/boot
-	 *
-	 * path[toplevel]=/lib/modules/`uname -r`
-	 *
-	 * path[toplevel]=/lib/modules/`kernelversion`
-	 *   (where kernelversion gives the major kernel version: "2.0", "2.2"...)
-	 *
-	 * path[toplevel]=/lib/modules/default
-	 *
-	 * path[kernel]=/lib/modules/kernel
-	 * path[fs]=/lib/modules/fs
-	 * path[net]=/lib/modules/net
-	 * path[scsi]=/lib/modules/scsi
-	 * path[block]=/lib/modules/block
-	 * path[cdrom]=/lib/modules/cdrom
-	 * path[ipv4]=/lib/modules/ipv4
-	 * path[ipv6]=/lib/modules/ipv6
-	 * path[sound]=/lib/modules/sound
-	 * path[fc4]=/lib/modules/fc4
-	 * path[video]=/lib/modules/video
-	 * path[misc]=/lib/modules/misc
-	 * path[pcmcia]=/lib/modules/pcmcia
-	 * path[atm]=/lib/modules/atm
-	 * path[usb]=/lib/modules/usb
-	 * path[ide]=/lib/modules/ide
-	 * path[ieee1394]=/lib/modules/ieee1394
-	 * path[mtd]=/lib/modules/mtd
-	 *
-	 * The idea is that modprobe will look first if the
-	 * modules are compiled for the current release of the kernel.
-	 * If not found, it will look for modules that fit for the
-	 * general kernelversion (2.0, 2.2 and so on).
-	 * If still not found, it will look into the default release.
-	 * And if still not found, it will look in the other directories.
-	 *
-	 * The strategy should be like this:
-	 * When you install a new linux kernel, the modules should go
-	 * into a directory related to the release (version) of the kernel.
-	 * Then you can do a symlink "default" to this directory.
-	 *
-	 * Each time you compile a new kernel, the make modules_install
-	 * will create a new directory, but it won't change thee default.
-	 *
-	 * When you get a module unrelated to the kernel distribution
-	 * you can place it in one of the last three directory types.
-	 *
-	 * This is the default strategy. Of course you can overide
-	 * this in /etc/modules.conf.
-	 *
-	 * 2.3.15 added a new file tree walk algorithm which made it possible to
-	 * point at a top level directory and get the same behaviour as earlier
-	 * versions of modutils.  2.3.16 takes this one stage further, it
-	 * removes all the individual directory names from most of the scans,
-	 * only pointing at the top level directory.  The only exception is the
-	 * last ditch scan, scanning all of /lib/modules would be a bad idea(TM)
-	 * so the last ditch scan still runs individual directory names under
-	 * /lib/modules.
-	 *
-	 * Additional syntax:
-	 *
-	 * [add] above module module1 ...
-	 *	Specify additional modules to pull in on top of a module
-	 *
-	 * [add] below module module1 ...
-	 *	Specify additional modules needed to be able to load a module
-	 *
-	 * [add] prune filename ...
-	 *
-	 * [add] probe name module1 ...
-	 *	When "name" is requested, modprobe tries to install each
-	 *	module in the list until it succeeds.
-	 *
-	 * [add] probeall name module1 ...
-	 *	When "name" is requested, modprobe tries to install all
-	 *	modules in the list.
-	 *	If any module is installed, the command has succeeded.
-	 *
-	 * [add] options module option_list
-	 *
-	 * For all of the above, the optional "add" prefix is used to
-	 * add to a list instead of replacing the contents.
-	 *
-	 * include FILE_TO_INCLUDE
-	 *	This does what you expect. No limitation on include levels.
-	 *
-	 * persistdir=persist_directory
-	 *	Name the directory to save persistent data from modules.
-	 *
-	 * In the following WORD is a sequence if non-white characters.
-	 * If ' " or ` is found in the string, all characters up to the
-	 * matching ' " or ` will also be included, even whitespace.
-	 * Every WORD will then be expanded w.r.t. meta-characters.
-	 * If the expanded result gives more than one word, then only
-	 * the first word of the result will be used.
-	 *
-	 *
-	 * define CODE WORD
-	 *		Do a putenv("CODE=WORD")
-	 *
-	 * EXPRESSION below can be:
-	 *	WORD compare_op WORD
-	 *		where compare_op is one of == != < <= >= >
-	 *		The string values of the WORDs are compared
-	 * or
-	 *	-n WORD compare_op WORD
-	 *		where compare_op is one of == != < <= >= >
-	 *		The numeric values of the WORDs are compared
-	 * or
-	 *	WORD
-	 *		if the expansion of WORD fails, or if the
-	 *		expansion is "0" (zero), "false" or "" (empty)
-	 *		then the expansion has the value FALSE.
-	 *		Otherwise the expansion has the value TRUE
-	 * or
-	 *	-f FILENAME
-	 *		Test if the file FILENAME exists
-	 * or
-	 *	-k
-	 *		Test if "autoclean" (i.e. called from the kernel)
-	 * or
-	 *	! EXPRESSION
-	 *		A negated expression is also an expression
-	 *
-	 * if EXPRESSION
-	 *	any config line
-	 *	...
-	 * elseif EXPRESSION
-	 *	any config line
-	 *	...
-	 * else
-	 *	any config line
-	 *	...
-	 * endif
-	 *
-	 * The else and elseif keywords are optional.
-	 * "if"-statements nest up to 20 levels.
-	 */
-
-	state[0] = 1;
-
-	if (force_ver)
-		version = force_ver;
-	else
-		version = uts_info.release;
-
-	config_version = xstrdup(version);
-
-	/* Only read the default entries on the first file */
-	if (depth == 0) {
-		maxpath = 100;
-		modpath = (struct PATH_TYPE *)xmalloc(maxpath * sizeof(struct PATH_TYPE));
-		nmodpath = 0;
-
-		maxexecs = 10;
-		execs = (struct EXEC_TYPE *)xmalloc(maxexecs * sizeof(struct EXEC_TYPE));
-		nexecs = 0;
-
-		/*
-		 * Build predef options
-		 */
-		if (all && optlist[0])
-			n_opt_list = build_list(optlist, &opt_list, version, 1);
-
-		/*
-		 * Build predef above
-		 */
-		if (all && above[0])
-			n_abovelist = build_list(above, &abovelist, version, 0);
-
-		/*
-		 * Build predef below
-		 */
-		if (all && below[0])
-			n_belowlist = build_list(below, &belowlist, version, 0);
-
-		/*
-		 * Build predef prune list
-		 */
-		if (prune[0])
-			n_prunelist = build_list(prune, &prunelist, version, 0);
-
-		/*
-		 * Build predef aliases
-		 */
-		if (all && aliaslist[0])
-			n_aliases = build_list(aliaslist, &aliases, version, 0);
-
-		/* Order and priority is now: (MODPATH + modules.conf) || (predefs + modules.conf) */
-		if ((envpath = getenv("MODPATH")) != NULL && !safemode) {
-			size_t len;
-			char *p;
-			char *path;
-
-			/* Make a copy so's we can mung it with strtok.  */
-			len = strlen(envpath) + 1;
-			p = alloca(len);
-			memcpy(p, envpath, len);
-			path = alloca(PATH_MAX);
-
-			for (p = strtok(p, ":"); p != NULL; p = strtok(NULL, ":")) {
-				len = snprintf(path, PATH_MAX, p, version);
-				modpath[nmodpath].path = xstrdup(path);
-				if ((type = strrchr(path, '/')) != NULL)
-					type += 1;
-				else
-					type = "misc";
-				modpath[nmodpath].type = xstrdup(type);
-				if (++nmodpath >= maxpath) {
-					maxpath += 100;
-					modpath = (struct PATH_TYPE *)xrealloc(modpath,
-						maxpath * sizeof(struct PATH_TYPE));
-				}
-
-			}
-		} else {
-			/*
-			 * Build the default "path[type]" configuration
-			 */
-			int n;
-			char *k;
-
-			/* The first entry in the path list */
-			modpath[nmodpath].type = xstrdup("boot");
-			snprintf(tmpline, sizeof(tmpline), "%s/lib/modules/boot", base_dir);
-			modpath[nmodpath].path = xstrdup(tmpline);
-			++nmodpath;
-
-			/* The second entry in the path list, `uname -r` */
-			modpath[nmodpath].type = xstrdup("toplevel");
-			snprintf(tmpline, sizeof(tmpline), "%s/lib/modules/%s", base_dir, version);
-			modpath[nmodpath].path = xstrdup(tmpline);
-			++nmodpath;
-
-			/* The third entry in the path list, `kernelversion` */
-			modpath[nmodpath].type = xstrdup("toplevel");
-			for (n = 0, k = version; *k; ++k) {
-				if (*k == '.' && ++n == 2)
-					break;
-			}
-			snprintf(tmpline, sizeof(tmpline), "%s/lib/modules/%.*s", base_dir,
-				(/* typecast for Alpha */ int)(k - version), version);
-			modpath[nmodpath].path = xstrdup(tmpline);
-			++nmodpath;
-
-			/* The rest of the entries in the path list */
-			for (pathp = tbpath; *pathp; ++pathp) {
-				char **type;
-
-				for (type = tbtype; *type; ++type) {
-					char path[PATH_MAX];
-
-					snprintf(path, sizeof(path), "%s%s/%s", base_dir, *pathp, *type);
-					if (meta_expand(path, &g, NULL, version, ME_ALL))
-						return -1;
-
-					for (glb = g.pathv; glb && *glb; ++glb) {
-						modpath[nmodpath].type = xstrdup(*type);
-						modpath[nmodpath].path = *glb;
-						if (++nmodpath >= maxpath) {
-							maxpath += 100;
-							modpath = (struct PATH_TYPE *)xrealloc(modpath,
-								maxpath * sizeof(struct PATH_TYPE));
-						}
-					}
-				}
-			}
-		}
-
-		/* Environment overrides for testing only, undocumented */
-		for (i = 0; i < gen_file_count; ++i)
-			gen_file_env(gen_file+i);
-
-	}	/* End of depth == 0 */
-
-	if (conf_file ||
-	    ((conf_file = getenv("MODULECONFIG")) != NULL && *conf_file && !safemode)) {
-		if (!(fin = fopen(conf_file, "r"))) {
-			error("Can't open %s", conf_file);
-			return -1;
-		}
-		conf_file_specified = 1;
-	} else {
-		if (!(fin = fopen((conf_file = ETC_MODULES_CONF), "r"))) {
-			/* Fall back to non-standard name */
-			if ((fin = fopen((conf_file = old_name), "r"))) {
-				fprintf(stderr,
-					"Warning: modutils is reading from %s because\n"
-					"         %s does not exist.  The use of %s is\n"
-					"         deprecated, please rename %s to %s\n"
-					"         as soon as possible.  Command\n"
-					"         mv %s %s\n",
-					old_name, ETC_MODULES_CONF,
-					old_name, old_name, ETC_MODULES_CONF,
-					old_name, ETC_MODULES_CONF);
-			}
-			/* So what... use the default configuration */
-		}
-	}
-
-	if (fin) {
-		struct stat statbuf1, statbuf2;
-		if (fstat(fileno(fin), &statbuf1) == 0)
-			config_mtime = statbuf1.st_mtime;
-		config_file = xstrdup(conf_file);	/* Save name actually used */
-		if (!conf_file_specified &&
-		    stat(ETC_MODULES_CONF, &statbuf1) == 0 &&
-		    stat(old_name, &statbuf2) == 0) {
-			/* Both /etc files exist */
-			if (statbuf1.st_dev == statbuf2.st_dev &&
-			    statbuf1.st_ino == statbuf2.st_ino) {
-				if (lstat(ETC_MODULES_CONF, &statbuf1) == 0 &&
-				    S_ISLNK(statbuf1.st_mode))
-					fprintf(stderr,
-						"Warning: You do not need a link from %s to\n"
-						"         %s.  The use of %s is deprecated,\n"
-						"         please remove %s and rename %s\n"
-						"         to %s as soon as possible.  Commands.\n"
-						"           rm %s\n"
-						"           mv %s %s\n",
-						ETC_MODULES_CONF, old_name,
-						old_name, ETC_MODULES_CONF, old_name, ETC_MODULES_CONF,
-						ETC_MODULES_CONF,
-						old_name, ETC_MODULES_CONF);
-				else {
-#ifndef NO_WARN_ON_OLD_LINK
-					fprintf(stderr,
-						"Warning: You do not need a link from %s to\n"
-						"         %s.  The use of %s is deprecated,\n"
-						"         please remove %s as soon as possible.  Command\n"
-						"           rm %s\n",
-						old_name, ETC_MODULES_CONF,
-						old_name, old_name,
-						old_name);
-#endif
-				}
-			}
-			else
-				fprintf(stderr,
-					"Warning: modutils is reading from %s and\n"
-					"         ignoring %s.  The use of %s is deprecated,\n"
-					"         please remove %s as soon as possible.  Command\n"
-					"           rm %s\n",
-					ETC_MODULES_CONF, old_name,
-					old_name, old_name,
-					old_name);
-		}
-	}
-
-	/*
-	 * Finally, decode the file
-	 */
-	while (fin && fgets_strip(buf, sizeof(buf) - 1, fin, &lineno) != NULL) {
-		char *arg2;
-		char *parm = buf;
-		char *arg;
-		int one_err = 0;
-		int adding;
-
-		while (isspace(*parm))
-			parm++;
-
-		if (strncmp(parm, "add", 3) == 0) {
-			adding = 1;
-			parm += 3;
-			while (isspace(*parm))
-				parm++;
-		} else
-			adding = 0;
-
-		arg = parm;
-
-		if (*parm == '\0')
-			continue;
-
-		one_err = 1;
-
-		while (*arg > ' ' && *arg != '=')
-			arg++;
-
-		if (*arg == '=')
-			assgn = 1;
-		else
-			assgn = 0;
-		*arg++ = '\0';
-		while (isspace(*arg))
-			arg++;
-
-		/*
-		 * endif
-		 */
-		if (!assgn && strcmp(parm, "endif") == 0) {
-			if (level > 0)
-				--level;
-			else {
-				error("unmatched endif in line %d", lineno);
-				return -1;
-			}
-			continue;
-		}
-
-		/*
-		 * else
-		 */
-		if (!assgn && strcmp(parm, "else") == 0) {
-			if (level <= 0) {
-				error("else without if in line %d", lineno);
-				return -1;
-			}
-			state[level] = !state[level];
-			continue;
-		}
-
-		/*
-		 * elseif
-		 */
-		if (!assgn && strcmp(parm, "elseif") == 0) {
-			if (level <= 0) {
-				error("elseif without if in line %d", lineno);
-				return -1;
-			}
-			if (state[level] != 0) {
-				/*
-				 * We have already found a TRUE
-				 * if statement in this "chain".
-				 * That's what "2" means.
-				 */
-				state[level] = 2;
-				continue;
-			}
-			/* else: No TRUE if has been found, cheat */
-			/*
-			 * The "if" handling increments level,
-			 * but this is the _same_ level as before.
-			 * So, compensate for it.
-			 */
-			--level;
-			parm = "if";
-			/* Fallthru to "if" */
-		}
-
-		/*
-		 * if
-		 */
-		if (strcmp(parm, "if") == 0) {
-			char *cmp;
-			int not = 0;
-			int numeric = 0;
-
-			if (level >= MAX_LEVEL) {
-				error("Too many nested if's in line %d\n", lineno);
-				return -1;
-			}
-			state[++level] = 0; /* default false */
-
-			if (*arg == '!') {
-				not = 1;
-				arg = next_word(arg);
-			}
-
-			if (strncmp(arg, "-k", 2) == 0) {
-				state[level] = flag_autoclean;
-				continue;
-			}
-
-			if (strncmp(arg, "-f", 2) == 0) {
-				char *file = next_word(arg);
-				meta_expand(file, &g, NULL, version, ME_ALL);
-				if (access(g.pathc ? g.pathv[0] : file, R_OK) == 0)
-					state[level] = !not;
-				else
-					state[level] = not;
-				continue;
-			}
-
-			if (strncmp(arg, "-n", 2) == 0) {
-				numeric = 1;
-				arg = next_word(arg);
-			}
-
-
-			cmp = next_word(arg);
-			if (*cmp) {
-				GLOB_LIST g2;
-				long n1 = 0;
-				long n2 = 0;
-				char *w1 = "";
-				char *w2 = "";
-
-				arg2 = next_word(cmp);
-
-				meta_expand(arg, &g, NULL, version, ME_ALL);
-				if (g.pathc && g.pathv[0])
-					w1 = g.pathv[0];
-
-				meta_expand(arg2, &g2, NULL, version, ME_ALL);
-				if (g2.pathc && g2.pathv[0])
-					w2 = g2.pathv[0];
-
-				if (numeric) {
-					n1 = strtol(w1, NULL, 0);
-					n2 = strtol(w2, NULL, 0);
-				}
-
-				if (strcmp(cmp, "==") == 0 ||
-				    strcmp(cmp, "=") == 0) {
-					if (numeric)
-					    state[level] = (n1 == n2);
-					else
-					    state[level] = strcmp(w1, w2) == 0;
-				} else if (strcmp(cmp, "!=") == 0) {
-					if (numeric)
-					    state[level] = (n1 != n2);
-					else
-					    state[level] = strcmp(w1, w2) != 0;
-				} else if (strcmp(cmp, ">=") == 0) {
-					if (numeric)
-					    state[level] = (n1 >= n2);
-					else
-					    state[level] = strcmp(w1, w2) >= 0;
-				} else if (strcmp(cmp, "<=") == 0) {
-					if (numeric)
-					    state[level] = (n1 <= n2);
-					else
-					    state[level] = strcmp(w1, w2) <= 0;
-				} else if (strcmp(cmp, ">") == 0) {
-					if (numeric)
-					    state[level] = (n1 > n2);
-					else
-					    state[level] = strcmp(w1, w2) > 0;
-				} else if (strcmp(cmp, "<") == 0) {
-					if (numeric)
-					    state[level] = (n1 < n2);
-					else
-					    state[level] = strcmp(w1, w2) < 0;
-				}
-			} else { /* Check defined value, if any */
-				/* undef or defined as
-				 *	"" or "0" or "false" => false
-				 *  defined => true
-				 */
-				if (!meta_expand(arg, &g, NULL, version, ME_ALL) &&
-				    g.pathc > 0 &&
-				    strcmp(g.pathv[0], "0") != 0 &&
-				    strcmp(g.pathv[0], "false") != 0 &&
-				    strlen(g.pathv[0]) != 0)
-					state[level] = 1; /* true */
-			}
-			if (not)
-				state[level] = !state[level];
-
-			continue;
-		}
-
-		/*
-		 * Should we bother?
-		 */
-		if (state[level] != 1)
-			continue;
-
-		/*
-		 * define
-		 */
-		if (!assgn && strcmp(parm, "define") == 0) {
-			char env[PATH_MAX];
-
-			arg2 = next_word(arg);
-			meta_expand(arg2, &g, NULL, version, ME_ALL);
-			snprintf(env, sizeof(env), "%s=%s", arg, (g.pathc ? g.pathv[0] : ""));
-			putenv(env);
-			one_err = 0;
-		}
-
-		/*
-		 * include
-		 */
-		if (!assgn && strcmp(parm, "include") == 0) {
-			meta_expand(arg, &g, NULL, version, ME_ALL);
-
-			if (!do_read(all, version, base_dir, g.pathc ? g.pathv[0] : arg, depth+1))
-				one_err = 0;
-			else
-				error("include %s failed\n", arg);
-		}
-
-		/*
-		 * above
-		 */
-		else if (all && !assgn && strcmp(parm, "above") == 0) {
-			decode_list(&n_abovelist, &abovelist, arg, adding, version, 0);
-			one_err = 0;
-		}
-
-		/*
-		 * below
-		 */
-		else if (all && !assgn && strcmp(parm, "below") == 0) {
-			decode_list(&n_belowlist, &belowlist, arg, adding, version, 0);
-			one_err = 0;
-		}
-
-		/*
-		 * prune
-		 */
-		else if (all && !assgn && strcmp(parm, "prune") == 0) {
-			decode_list(&n_prunelist, &prunelist, arg, adding, version, 0);
-			one_err = 0;
-		}
-
-		/*
-		 * probe
-		 */
-		else if (all && !assgn && strcmp(parm, "probe") == 0) {
-			decode_list(&n_probe_list, &probe_list, arg, adding, version, 0);
-			one_err = 0;
-		}
-
-		/*
-		 * probeall
-		 */
-		else if (all && !assgn && strcmp(parm, "probeall") == 0) {
-			decode_list(&n_probeall_list, &probeall_list, arg, adding, version, 0);
-			one_err = 0;
-		}
-
-		/*
-		 * options
-		 */
-		else if (all && !assgn && strcmp(parm, "options") == 0) {
-			decode_list(&n_opt_list, &opt_list, arg, adding, version, 1);
-			one_err = 0;
-		}
-
-		/*
-		 * alias
-		 */
-		else if (all && !assgn && strcmp(parm, "alias") == 0) {
-			/*
-			 * Replace any previous (default) definitions
-			 * for the same module
-			 */
-			decode_list(&n_aliases, &aliases, arg, 0, version, 0);
-			one_err = 0;
-		}
-
-		/*
-		 * Specification: /etc/modules.conf
-		 * The format of the commands in /etc/modules.conf are:
-		 *
-		 *	pre-install module command
-		 *	install module command
-		 *	post-install module command
-		 *	pre-remove module command
-		 *	remove module command
-		 *	post-remove module command
-		 *
-		 * The different words are separated by tabs or spaces.
-		 */
-		/*
-		 * pre-install
-		 */
-		else if (all && !assgn && (strcmp(parm, "pre-install") == 0)) {
-			decode_exec(arg, EXEC_PRE_INSTALL);
-			one_err = 0;
-		}
-
-		/*
-		 * install
-		 */
-		else if (all && !assgn && (strcmp(parm, "install") == 0)) {
-			decode_exec(arg, EXEC_INSTALL);
-			one_err = 0;
-		}
-
-		/*
-		 * post-install
-		 */
-		else if (all && !assgn && (strcmp(parm, "post-install") == 0)) {
-			decode_exec(arg, EXEC_POST_INSTALL);
-			one_err = 0;
-		}
-
-		/*
-		 * pre-remove
-		 */
-		else if (all && !assgn && (strcmp(parm, "pre-remove") == 0)) {
-			decode_exec(arg, EXEC_PRE_REMOVE);
-			one_err = 0;
-		}
-
-		/*
-		 * remove
-		 */
-		else if (all && !assgn && (strcmp(parm, "remove") == 0)) {
-			decode_exec(arg, EXEC_REMOVE);
-			one_err = 0;
-		}
-
-		/*
-		 * post-remove
-		 */
-		else if (all && !assgn && (strcmp(parm, "post-remove") == 0)) {
-			decode_exec(arg, EXEC_POST_REMOVE);
-			one_err = 0;
-		}
-
-		/*
-		 * insmod_opt=
-		 */
-		else if (assgn && (strcmp(parm, "insmod_opt") == 0)) {
-			insmod_opt = xstrdup(arg);
-			one_err = 0;
-		}
-
-		/*
-		 * keep
-		 */
-		else if (!assgn && (strcmp(parm, "keep") == 0)) {
-			drop_default_paths = 0;
-			one_err = 0;
-		}
-
-		/*
-		 * path...=
-		 */
-		else if (assgn && strncmp(parm, "path", 4) == 0) {
-			/*
-			 * Specification: config file / path parameter
-			 * The path parameter specifies a directory to
-			 * search for modules.
-			 * This parameter may be repeated multiple times.
-			 *
-			 * Note that the actual path may be defined using
-			 * wildcards and other shell meta-chars, such as "*?`".
-			 * For example:
-			 *      path[misc]=/lib/modules/1.1.5?/misc
-			 *
-			 * Optionally the path keyword carries a tag.
-			 * This tells us a little more about the purpose of
-			 * this directory and allows some automated operations.
-			 * A path is marked with a tag by adding the tag,
-			 * enclosed in square brackets, to the path keyword:
-			 * #
-			 * path[boot]=/lib/modules/boot
-			 * #
-			 * This case identifies the path a of directory
-			 * holding modules loadable a boot time.
-			 */
-
-			if (drop_default_paths) {
-				int n;
-
-				/*
-				 * Specification: config file / path / default
-				 *
-				 * Whenever there is a path[] specification
-				 * in the config file, all the default
-				 * path are reset.
-				 *
-				 * If one instead wants to _add_ to the default
-				 * set of paths, one has to have the option
-				 *    keep
-				 * before the first path[]-specification line
-				 * in the configuration file.
-				 */
-				drop_default_paths = 0;
-				for (n = 0; n < nmodpath; n++) {
-					free(modpath[n].path);
-					free(modpath[n].type);
-				}
-				nmodpath = 0;
-			}
-
-			/*
-			 * Get (the optional) tag
-			 * If the tag is missing, the word "misc"
-			 * is assumed.
-			 */
-			type = "misc";
-
-			if (parm[4] == '[') {
-				char *pt_type = parm + 5;
-
-				while (*pt_type != '\0' && *pt_type != ']')
-					pt_type++;
-
-				if (*pt_type == ']' && pt_type[1] == '\0') {
-					*pt_type = '\0';
-					type = parm + 5;
-				} /* else CHECKME */
-			}
-
-			/*
-			 * Handle the actual path description
-			 */
-			if (meta_expand(arg, &g, base_dir, version, ME_ALL))
-				return -1;
-			for (glb = g.pathv; glb && *glb; ++glb) {
-				modpath[nmodpath].type = xstrdup(type);
-				modpath[nmodpath].path = *glb;
-				if (++nmodpath >= maxpath) {
-					maxpath += 100;
-					modpath = (struct PATH_TYPE *)xrealloc(modpath,
-						maxpath * sizeof(struct PATH_TYPE));
-				}
-			}
-			one_err = 0;
-		}
-
-		/*
-		 * persistdir
-		 */
-		else if (assgn && strcmp(parm, "persistdir") == 0) {
-			meta_expand(arg, &g, NULL, version, ME_ALL);
-			persistdir = xstrdup(g.pathc ? g.pathv[0] : arg);
-			one_err = 0;
-		}
-
-		/* Names for generated files in config file */
-		for (i = 0; one_err && i < gen_file_count; ++i)
-			one_err = gen_file_conf(gen_file+i, assgn, parm, arg);
-
-		/*
-		 * any errors so far?
-		 */
-		if (all == 0)
-			one_err = 0;
-		else if (one_err) {
-			error("Invalid line %d in %s\n\t%s",
-				     lineno, conf_file, buf);
-			ret = -1;
-		}
-	}
-	if (fin)
-		fclose(fin);
-
-	if (level) {
-		error("missing endif at %s EOF", conf_file);
-		ret = -1;
-	}
-
-	if (ret)
-		return ret;
-	/* else */
-
-	/* Check we have names for generated files */
-	for (i = 0; !ret && i < gen_file_count; ++i)
-		ret = gen_file_check(gen_file+i, &g, base_dir, version);
-
-	return ret;
-}
-
-int config_read(int all, char *force_ver, char *base_dir, char *conf_file)
-{
-	int r;
-	if (modpath != NULL)
-		return 0; /* already initialized */
-
-	if (uname(&uts_info) < 0) {
-		error("Failed to find kernel name information");
-		return -1;
-	}
-
-	r = do_read(all, force_ver, base_dir, conf_file, 0);
-
-	if (quick && !r && !need_update (force_ver, base_dir))
-		exit (0);
-
-	return r;
-}
-
-/****************************************************************************/
-/*
- *	FIXME: Far too much global state.  KAO.
- */
-static int found;
-static int favail;
-static int one_only;
-static int meta_expand_type;
-char **list;
-static const char *filter_by_file;
-static char *filter_by_dir;
-
-/*
- *	Add a file name if it exist
- */
-static int config_add(const char *file, const struct stat *sb)
-{
-	int i;
-	int npaths = 0;
-	char **paths = NULL;
-
-	if (meta_expand_type) {
-		GLOB_LIST g;
-		char **p;
-		char full[PATH_MAX];
-
-		snprintf(full, sizeof(full), "%s/%s", file, filter_by_file);
-
-		if (filter_by_dir && !strstr(full, filter_by_dir))
-			return 0;
-
-		if (meta_expand(full, &g, NULL, config_version, meta_expand_type))
-			return 1;
-		for (p = g.pathv; p && *p; ++p) {
-			paths = (char **)xrealloc(paths,
-					(npaths + 1) * sizeof(char *));
-			paths[npaths++] = *p;
-		}
-	} else { /* normal path match or match with "*" */
-		if (!S_ISREG(sb->st_mode))
-			return 0;
-
-		if (strcmp(filter_by_file, "*")) {
-			char *p;
-
-			if ((p = strrchr(file, '/')) == NULL)
-				p = (char *)file;
-			else
-				p += 1;
-
-			if (strcmp(p, filter_by_file))
-				return 0;
-		}
-		if (filter_by_dir && !strstr(file, filter_by_dir))
-			return 0;
-		paths = (char **)xmalloc(sizeof(char **));
-		*paths = xstrdup(file);
-		npaths = 1;
-	}
-
-	for (i = 0; i < npaths; ++i) {
-		struct stat sbuf;
-
-		if (S_ISDIR(sb->st_mode)) {
-			if (stat(paths[i], &sbuf) == 0)
-				sb = &sbuf;
-		}
-		if (S_ISREG(sb->st_mode) && sb->st_mode & S_IRUSR) {
-			int j;
-			char **this;
-
-			if (!root_check_off) {
-				if (sb->st_uid != 0) {
-					error("%s is not owned by root", paths[i]);
-					continue;
-				}
-			}
-
-			/* avoid duplicates */
-			for (j = 0, this = list; j < found; ++j, ++this) {
-				if (strcmp(*this, paths[i]) == 0) {
-					free(paths[i]);
-					goto next;
-				}
-			}
-
-			list[found] = paths[i];
-			if (++found >= favail)
-				list = (char **)xrealloc(list,
-				     (favail += 100) * sizeof(char *));
-
-			if (one_only) {
-				for (j = i + 1; j < npaths; ++j)
-					free(paths[j]);
-				free(paths);
-				return 1; /* finish xftw */
-			}
-		}
-	    next:
-	}
-
-	if (npaths > 0)
-		free(paths);
-
-	return 0;
-}
-
-/*
- * Find modules matching the name "match" in directory of type "type"
- * (type == NULL matches all)
- *
- * Return a pointer to the list of modules found (or NULL if error).
- * Update the counter (sent as parameter).
- */
-GLOB_LIST *config_lstmod(const char *match, const char *type, int first_only)
-{
-	/*
-	 * Note:
-	 * There are _no_ wildcards remaining in the path descriptions!
-	 */
-	struct stat sb;
-	int i;
-	int ret = 0;
-	char *path = NULL;
-	char this[PATH_MAX];
-
-	if (!match)
-		match = "*";
-	one_only = first_only;
-	found = 0;
-	filter_by_file = match;
-	filter_by_dir = NULL;
-	if (type) {
-		char tmpdir[PATH_MAX];
-		snprintf(tmpdir, sizeof(tmpdir), "/%s/", type);
-		filter_by_dir = xstrdup(tmpdir);
-	}
-	/* In safe mode, the module name is always handled as is, without meta
-	 * expansion.  It might have come from an end user via kmod and must
-	 * not be trusted.  Even in unsafe mode, only apply globbing to the
-	 * module name, not command expansion.  We trust config file input so
-	 * applying command expansion is safe, we do not trust command line input.
-	 * This assumes that the only time the user can specify -C config file 
-	 * is when they run under their own authority.  In particular all
-	 * mechanisms that call modprobe as root on behalf of the user must
-	 * run in safe mode, without letting the user supply a config filename.
-	 */
-	meta_expand_type = 0;
-	if (strpbrk(match, SHELL_META) && strcmp(match, "*") && !safemode)
-		meta_expand_type = ME_GLOB|ME_BUILTIN_COMMAND;
-
-	list = (char **)xmalloc((favail = 100) * sizeof(char *));
-
-	for (i = 0; i < nmodpath; i++) {
-		path = modpath[i].path;
-		/* Special case: insmod: handle single, non-wildcard match */
-		if (first_only && strpbrk(match, SHELL_META) == NULL) {
-			/* Fix for "2.1.121 syntax */
-			snprintf(this, sizeof(this), "%s/%s/%s", path,
-						  modpath[i].type, match);
-			if (stat(this, &sb) == 0 &&
-			    config_add(this, &sb))
-				break;
-			/* End fix for "2.1.121 syntax */
-
-			snprintf(this, sizeof(this), "%s/%s", path, match);
-			if (stat(this, &sb) == 0 &&
-			    config_add(this, &sb))
-				break;
-		}
-
-		/* Start looking */
-		if ((ret = xftw(path, config_add))) {
-			break;
-		}
-	}
-	if (ret >= 0) {
-		GLOB_LIST *g = (GLOB_LIST *)xmalloc(sizeof(GLOB_LIST));
-		g->pathc = found;
-		g->pathv = list;
-		free(filter_by_dir);
-		return g;
-	}
-	free(list);
-	free(filter_by_dir);
-	return NULL;
-}
-
-/* Given a bare module name, poke through the module path to find the file.  */
-char *search_module_path(const char *base)
-{
-	GLOB_LIST *g;
-
-	if (config_read(0, NULL, "", NULL) < 0)
-		return NULL;
-	/* else */
-	g = config_lstmod(base, NULL, 1);
-	if (g == NULL || g->pathc == 0) {
-		char base_o[PATH_MAX];
-
-		snprintf(base_o, sizeof(base_o), "%s.o", base);
-		g = config_lstmod(base_o, NULL, 1);
-#ifdef CONFIG_USE_ZLIB
-		if (g == NULL || g->pathc == 0) {
-			snprintf(base_o, sizeof(base_o), "%s.o.gz", base);
-			g = config_lstmod(base_o, NULL, 1);
-		}
-#endif
-	}
-	if (g == NULL || g->pathc == 0)
-		return NULL;
-	/* else */
-	return g->pathv[0];
-}
diff --git a/mdk-stage1/insmod-modutils/util/gzfiles.c b/mdk-stage1/insmod-modutils/util/gzfiles.c
deleted file mode 100644
index 8d02253bb..000000000
--- a/mdk-stage1/insmod-modutils/util/gzfiles.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * This simple library intends to make it transparent to read gzipped and/or
- * standard files. This is simple enough to fit modutils' needs, but may be
- * easily adapted to anyone's needs. It's completely free, do what you want
- * with it .  - Willy Tarreau <willy@meta-x.org> - 2000/05/05 -
- */
-
-#ifdef CONFIG_USE_ZLIB
-
-#include <stdio.h>
-#include <zlib.h>
-#include <sys/types.h>
-#include <fcntl.h>
-#include <unistd.h>
-
-/* redefinition of gz_stream which isn't exported by zlib */
-typedef struct gz_stream {
-    z_stream stream;
-    int      z_err;   /* error code for last stream operation */
-    int      z_eof;   /* set if end of input file */
-    FILE     *file;   /* .gz file */
-    Byte     *inbuf;  /* input buffer */
-    Byte     *outbuf; /* output buffer */
-    uLong    crc;     /* crc32 of uncompressed data */
-    char     *msg;    /* error message */
-    char     *path;   /* path name for debugging only */
-    int      transparent; /* 1 if input file is not a .gz file */
-    char     mode;    /* 'w' or 'r' */
-    long     startpos; /* start of compressed data in file (header skipped) */
-} gz_stream;
-
-/* maximum number of simultaneous open files, also greater file descriptor number */
-#define MAXFD	64
-
-/* this static list is assumed to be filled with NULLs at runtime */
-static gzFile gzf_fds[MAXFD];
-
-/* returns the filedesc of the opened file. */
-int gzf_open(const char *name, int mode) {
-    int fd;
-    gzFile g;
-
-    if ((g=gzopen(name, "rb")) != NULL) {
-	fd=fileno(((gz_stream*)g)->file);
-	gzf_fds[fd]=g;
-    }
-    else if ((fd=open(name, mode)) != -1) {
-	gzf_fds[fd]=NULL; /* NULL means not GZ mode */
-    }
-    return fd;
-}
-
-off_t gzf_lseek(int fd, off_t offset, int whence) {
-    if (fd<0 || fd>=MAXFD || gzf_fds[fd]==NULL)
-	return lseek(fd, offset, whence);
-    else
-	return gzseek(gzf_fds[fd], offset, whence);
-}
-
-int gzf_read(int fd, void *buf, size_t count) {
-    if (fd<0 || fd>=MAXFD || gzf_fds[fd]==NULL)
-	return read(fd, buf, count);
-    else
-	return gzread(gzf_fds[fd], buf, count);
-}
-
-void gzf_close(int fd) {
-    if (fd<0 || fd>=MAXFD || gzf_fds[fd]==NULL)
-	close(fd);
-    else
-	gzclose(gzf_fds[fd]);
-}
-#endif
-
diff --git a/mdk-stage1/insmod-modutils/util/logger.c b/mdk-stage1/insmod-modutils/util/logger.c
deleted file mode 100644
index 3b790df5a..000000000
--- a/mdk-stage1/insmod-modutils/util/logger.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/* Error logging facilities.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
-  */
-
-#ident "$Id$"
-
-#include <stdio.h>
-#include <stdarg.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <syslog.h>
-
-#include "util.h"
-
-/*======================================================================*/
-
-int errors;
-const char *error_file;
-int log;
-
-#define STOREMSG
-#ifdef STOREMSG
-struct cbuf {
-	struct cbuf *next;
-	int type;
-	char *msg;
-} *head, *tail;
-
-static void savemsg(int type, char *msg)
-{
-	struct cbuf *me = (struct cbuf *)xmalloc(sizeof(struct cbuf));
-	char *s = xstrdup(msg);
-
-	me->next = NULL;
-	me->type = type;
-	me->msg = s;
-
-	if (tail)
-		tail->next = me;
-	else
-		head = me;
-	tail = me;
-}
-
-#endif /* STOREMSG */
-
-static void dumpmsg(void)
-{
-	for (;head; head = head->next)
-		syslog(head->type, "%s", head->msg);
-}
-
-void setsyslog(const char *program)
-{
-	openlog(program, LOG_CONS, LOG_DAEMON);
-#ifdef STOREMSG
-	atexit(dumpmsg);
-#endif
-	log = 1;
-}
-
-
-
-#ifdef _STANDALONE_
-static int silent;
-
-const char *program_name;
-
-void error(const char *fmt,...)
-{
-	va_list args;
-
-	if (silent)
-		;
-	else if (log) {
-		char buf[1024];
-		int n;
-
-		if (error_file)
-			n = snprintf(buf, sizeof(buf), "%s: ", error_file);
-		else
-			n = 0;
-		va_start(args, fmt);
-		vsnprintf(buf + n, sizeof(buf) - n, fmt, args);
-		va_end(args);
-#ifdef STOREMSG
-		savemsg(LOG_ERR, buf);
-#else
-		syslog(LOG_ERR, "%s", buf);
-#endif
-	} else {
-		if (error_file)
-			fprintf(stderr, "%s: ", error_file);
-		va_start(args, fmt);
-		vfprintf(stderr, fmt, args);
-		va_end(args);
-		putc('\n', stderr);
-	}
-
-	errors++;
-}
-
-void lprintf(const char *fmt,...)
-{
-	va_list args;
-
-	if (silent);
-	else if (log) {
-		char buf[1024];
-		va_start(args, fmt);
-		vsnprintf(buf, sizeof(buf), fmt, args);
-		va_end(args);
-#ifdef STOREMSG
-		savemsg(LOG_INFO, buf);
-#else
-		syslog(LOG_INFO, "%s", buf);
-#endif
-	} else {
-		va_start(args, fmt);
-		vfprintf(stdout, fmt, args);
-		va_end(args);
-		putchar('\n');
-	}
-}
-
-#else /* _STANDALONE_ */
-#include "../../log.h"
-void error(const char *s, ...)
-{
-	va_list p;
-
-	va_start(p, s);
-	vlog_message(s, p);
-	va_end(p);
-}
-
-void lprintf(const char *s, ...)
-{
-	va_list p;
-
-	va_start(p, s);
-	vlog_message(s, p);
-	va_end(p);
-}
-#endif
diff --git a/mdk-stage1/insmod-modutils/util/meta_expand.c b/mdk-stage1/insmod-modutils/util/meta_expand.c
deleted file mode 100644
index 41fb4024c..000000000
--- a/mdk-stage1/insmod-modutils/util/meta_expand.c
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- * Handle expansion of meta charaters
- *
- * Copyright 1999 Bj�rn Ekwall <bj0rn@blox.se>
- *
- * "kernelversion" idea from the Debian release via:
- *	Wichert Akkerman <wakkerma@cs.leidenuniv.nl>
- *
- * Use wordexp(): idea from Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * Alpha typecast: Michal Jaegermann <michal@ellpspace.math.ualberta.ca>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifdef HAVE_WORDEXP
-#undef HAVE_WORDEXP
-#define HAVE_WORDEXP 0
-#endif
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <limits.h>
-#include <string.h>
-#include <ctype.h>
-#if HAVE_WORDEXP
-#include <wordexp.h>
-#elif HAVE_GLOB
-#include <glob.h>
-#endif
-#include "util.h"
-
-/*
- * Split into words delimited by whitespace,
- * handle remaining quotes though...
- * If strip_quotes != 0 then strip one level of quotes from the line.
- */
-static void split_line(GLOB_LIST *g, char *line, int strip_quotes)
-{
-	int len;
-	char *d;
-	char *e;
-	char *p;
-	char tmpline[PATH_MAX];
-
-	for (p = line; *p; p = e) {
-		/* Skip leading whitespace */
-		while (*p && isspace(*p))
-			++p;
-
-		/* find end of word */
-		d = tmpline;
-		for (e = p; *e && !(isspace(*e)); ++e) {
-			char match;
-
-			/* Quote handling */
-			switch (*e) {
-			case '\\':
-				if (!strip_quotes)
-					*d++ = *e;
-				break;
-
-			case '"':
-			case '\'':
-				match = *e;
-				if (!strip_quotes)
-					*d++ = *e;
-				for (++e; *e && *e != match; ++e) {
-					*d++ = *e;
-					if (*e == '\\' && *(e + 1) == match)
-						*d++ = *++e;
-				}
-				if (!strip_quotes)
-					*d++ = *e;
-				break;
-
-			default:
-				*d++ = *e;
-				break;
-			}
-		}
-
-		if ((len = (int)(d - tmpline)) > 0) {
-			char *str = xmalloc(len + 1);
-			strncpy(str, tmpline, len);
-			str[len] = '\0';
-			g->pathv = (char **)xrealloc(g->pathv,
-				   (g->pathc + 2) * sizeof(char *));
-			g->pathv[g->pathc++] = str;
-		}
-	}
-
-	if (g->pathc)
-		g->pathv[g->pathc] = NULL;
-}
-
-static int glob_it(char *pt, GLOB_LIST *g)
-{
-#if HAVE_WORDEXP
-	wordexp_t w;
-
-	memset(&w, 0, sizeof(w));
-	if (wordexp(pt, &w, WRDE_UNDEF)) {
-		/*
-		error("wordexp %s failed", pt);
-		*/
-		return -1;
-	}
-	/* else */
-	g->pathc = w.we_wordc;
-	g->pathv = w.we_wordv;
-
-	return 0;
-#elif HAVE_GLOB /* but not wordexp */
-	glob_t w;
-
-	memset(&w, 0, sizeof(w));
-	if (glob(pt, GLOB_NOSORT, NULL, &w)) {
-		/*
-		error("glob %s failed", pt);
-		*/
-		return -1;
-	}
-	/* else */
-	if (w.gl_pathc && strpbrk(w.gl_pathv[0], SHELL_META)) {
-		globfree(&w);
-		return -1;
-	}
-	g->pathc = w.gl_pathc;
-	g->pathv = w.gl_pathv;
-
-	return 0;
-#else /* Neither wordexp nor glob */
-	return -1;
-#endif
-}
-
-/*
- * Expand the string (including meta-character) to a list of matches
- *
- * Return 0 if OK else -1
- */
-int meta_expand(char *pt, GLOB_LIST *g, char *base_dir, char *version, int type)
-{
-	FILE *fin;
-	int len = 0;
-	char *line = NULL;
-	char *p, *p1;
-	char tmpline[PATH_MAX + 1];
-	char wrk[sizeof(tmpline)];
-	char tmpcmd[2*sizeof(tmpline)+20];	/* room for /bin/echo "text" */
-
-	g->pathc = 0;
-	g->pathv = NULL;
-
-	/*
-	 * Take care of version dependent expansions
-	 * Needed for forced version handling
-	 */
-	if ((p = strchr(pt, '`')) != NULL && (type & ME_BUILTIN_COMMAND)) {
-		do {
-			char *s;
-
-			for (s = p + 1; isspace(*s); ++s)
-				;
-
-			if (strncmp(s, "uname -r", 8) == 0) {
-				while (*s && (*s != '`'))
-					++s;
-				if (*s == '`') {
-					*p = '\0';
-					snprintf(wrk, sizeof(wrk), "%s%s%s",
-						     pt,
-						     version,
-						     s + 1);
-					*p = '`';
-				}
-				strcpy(tmpline, wrk);	/* safe, same size */
-				pt = tmpline;
-			} else if (strncmp(s, "kernelversion", 13) == 0) {
-				while (*s && (*s != '`'))
-					++s;
-				if (*s == '`') {
-					int n;
-					char *k;
-
-					*p = '\0';
-					for (n = 0, k = version; *k; ++k) {
-						if (*k == '.' && ++n == 2)
-							break;
-					}
-					snprintf(wrk, sizeof(wrk), "%s%.*s%s",
-						     pt,
-						     /* typecast for Alpha */
-						     (int)(k - version),
-						     version,
-						     s + 1);
-					*p = '`';
-					strcpy(tmpline, wrk);	/* safe, same size */
-					pt = tmpline;
-				}
-			} else
-				break;
-		} while ((p = strchr(pt, '`')) != NULL);
-	}
-
-	/*
-	 * Any remaining meta-chars?
-	 */
-	if (strpbrk(pt, SHELL_META) == NULL) {
-		/*
-		 * No meta-chars.
-		 * Split into words, delimited by whitespace.
-		 */
-		snprintf(wrk, sizeof(wrk), "%s%s", (base_dir ? base_dir : ""), pt);
-		strcpy(tmpline, wrk);	/* safe, same size */
-		if ((p = strtok(tmpline, " \t\n")) != NULL) {
-			while (p) {
-				g->pathv = (char **)xrealloc(g->pathv,
-					   (g->pathc + 2) * sizeof(char *));
-				g->pathv[g->pathc++] = xstrdup(p);
-				p = strtok(NULL, " \t\n");
-			}
-		}
-		if (g->pathc)
-			g->pathv[g->pathc] = NULL;
-		return 0;
-	}
-	/* else */
-	/*
-	 * Handle remaining meta-chars
-	 */
-
-	/*
-	 * Just plain quotes?
-	 */
-	if (strpbrk(pt, "&();|<>$`!{}[]~=+:?*") == NULL &&
-	    (p = strpbrk(pt, "\"'\\"))) {
-		split_line(g, pt, 1);
-		return 0;
-	}
-
-	if (strpbrk(pt, "&();|<>$`\"'\\!{}~+:[]~?*") == NULL) {
-		/* Only "=" remaining, should be module options */
-		split_line(g, pt, 0);
-		return 0;
-	}
-
-	/*
-	 * If there are meta-characters and
-	 * if they are only shell glob meta-characters: do globbing
-	 */
-#if HAVE_WORDEXP
-	if (strpbrk(pt, "&();|<>`\"'\\!{}~=+:") == NULL &&
-	    strpbrk(pt, "$[]~?*"))
-#else
-	if (strpbrk(pt, "&();|<>$`\"'\\!{}~=+:") == NULL &&
-	    strpbrk(pt, "[]~?*"))
-#endif
-		if ((type & ME_GLOB) && glob_it(pt, g) == 0)
-			return 0;
-
-	if (strpbrk(pt, "&();|<>$`\"'\\!{}~+:[]~?*") == NULL) {
-		/* Only "=" remaining, should be module options */
-		split_line(g, pt, 0);
-		return 0;
-	}
-
-	/*
-	 * Last resort: Use "echo".
-	 * DANGER: Applying shell expansion to user supplied input is a
-	 *         major security risk.  Modutils code should only do meta
-	 *         expansion via shell commands for trusted data.  Basically
-	 *         this means only for data in the config file.   Even that
-	 *         assumes that the user cannot run modprobe as root with
-	 *         their own config file.  Programs (including the kernel)
-	 *         that invoke modprobe as root with user supplied input must
-	 *         pass exactly one user supplied parameter and must set
-	 *         safe mode.
-	 */
-	if (!(type & ME_SHELL_COMMAND))
-		return 0;
-	snprintf(wrk, sizeof(wrk), "%s%s", (base_dir ? base_dir : ""), pt);
-	strcpy(tmpline, wrk);	/* safe, same size */
-	snprintf(tmpcmd, sizeof(tmpcmd), "/bin/echo \"");
-	for (p = tmpline, p1 = tmpcmd + strlen(tmpcmd); *p; ++p, ++p1) {
-		if (*p == '"' || *p == '\\')
-			*p1++ = '\\';
-		*p1 = *p;
-	}
-	*p1++ = '"';
-	*p1++ = '\0';
-	if (p1 - tmpcmd > sizeof(tmpcmd)) {
-		error("tmpcmd overflow, should never happen");
-		exit(1);
-	}
-	if ((fin = popen(tmpcmd, "r")) == NULL) {
-		error("Can't execute: %s", tmpcmd);
-		return -1;
-	}
-	/* else */
-
-	/*
-	 * Collect the result
-	 */
-	while (fgets(tmpcmd, PATH_MAX, fin) != NULL) {
-		int l = strlen(tmpcmd);
-
-		line = (char *)xrealloc(line, len + l + 1);
-		line[len] = '\0';
-		strcat(line + len, tmpcmd);	/* safe, realloc */
-		len += l;
-	}
-	pclose(fin);
-
-	if (line) {
-		/* shell used to strip one set of quotes.  Paranoia code in
-		 * 2.3.20 stops that strip so we do it ourselves.
-		 */
-		split_line(g, line, 1);
-		free(line);
-	}
-
-	return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/util/modstat.c b/mdk-stage1/insmod-modutils/util/modstat.c
deleted file mode 100644
index ad82306c0..000000000
--- a/mdk-stage1/insmod-modutils/util/modstat.c
+++ /dev/null
@@ -1,419 +0,0 @@
-/*
- * Get kernel symbol table(s) and other relevant module info.
- *
- * Add module_name_list and l_module_name_list.
- *   Keith Owens <kaos@ocs.com.au> November 1999.
- * Bj�rn Ekwall <bj0rn@blox.se> in February 1999 (C)
- * Initial work contributed by Richard Henderson <rth@tamu.edu>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <errno.h>
-#include "util.h"
-#include "module.h"
-#include "obj.h"
-#include "modstat.h"
-
-struct module_stat *module_stat;
-size_t n_module_stat;
-char *module_name_list;
-size_t l_module_name_list;
-struct module_symbol *ksyms;
-size_t nksyms;
-int k_new_syscalls;
-
-static void *old_kernsym;
-
-/************************************************************************/
-static void drop(void)
-{
-	/*
-	 * Clean the slate for multiple runs
-	 */
-	if (module_stat) {
-		struct module_stat *m;
-		int i;
-
-		for (i = 0, m = module_stat; i < n_module_stat; ++i, ++m) {
-			if (m->syms)
-				free(m->syms);
-			if (m->refs)
-				free(m->refs);
-		}
-		free(module_stat);
-		module_stat = NULL;
-		n_module_stat = 0;
-	}
-	if (module_name_list) {
-		free(module_name_list);
-		module_name_list = NULL;
-		l_module_name_list = 0;
-	}
-	if (ksyms) {
-		free(ksyms);
-		ksyms = NULL;
-		nksyms = 0;
-	}
-	if (old_kernsym) {
-		free(old_kernsym);
-		old_kernsym = NULL;
-	}
-}
-
-static int new_get_kernel_info(int type)
-{
-	struct module_stat *modules;
-	struct module_stat *m;
-	struct module_symbol *syms;
-	struct module_symbol *s;
-	size_t ret;
-	size_t bufsize;
-	size_t nmod;
-	size_t nsyms;
-	size_t i;
-	size_t j;
-	char *module_names;
-	char *mn;
-
-	drop();
-
-	/*
-	 * Collect the loaded modules
-	 */
-	module_names = xmalloc(bufsize = 256);
-	while (query_module(NULL, QM_MODULES, module_names, bufsize, &ret)) {
-		if (errno != ENOSPC) {
-			error("QM_MODULES: %m\n");
-			return 0;
-		}
-		module_names = xrealloc(module_names, bufsize = ret);
-	}
-	module_name_list = module_names;
-	l_module_name_list = bufsize;
-	n_module_stat = nmod = ret;
-	module_stat = modules = xmalloc(nmod * sizeof(struct module_stat));
-	memset(modules, 0, nmod * sizeof(struct module_stat));
-
-	/* Collect the info from the modules */
-	for (i = 0, mn = module_names, m = modules;
-	     i < nmod;
-	     ++i, ++m, mn += strlen(mn) + 1) {
-		struct module_info info;
-
-		m->name = mn;
-		if (query_module(mn, QM_INFO, &info, sizeof(info), &ret)) {
-			if (errno == ENOENT) {
-			/* The module was removed out from underneath us. */
-				m->flags = NEW_MOD_DELETED;
-				continue;
-			}
-			/* else oops */
-			error("module %s: QM_INFO: %m", mn);
-			return 0;
-		}
-
-		m->addr = info.addr;
-
-		if (type & K_INFO) {
-			m->size = info.size;
-			m->flags = info.flags;
-			m->usecount = info.usecount;
-			m->modstruct = info.addr;
-		}
-
-		if (type & K_REFS) {
-			int mm;
-			char *mrefs;
-			char *mr;
-
-			mrefs = xmalloc(bufsize = 64);
-			while (query_module(mn, QM_REFS, mrefs, bufsize, &ret)) {
-				if (errno != ENOSPC) {
-					error("QM_REFS: %m");
-					return 1;
-				}
-				mrefs = xrealloc(mrefs, bufsize = ret);
-			}
-			for (j = 0, mr = mrefs;
-			     j < ret;
-			     ++j, mr += strlen(mr) + 1) {
-				for (mm = 0; mm < i; ++mm) {
-					if (strcmp(mr, module_stat[mm].name) == 0) {
-						m->nrefs += 1;
-						m->refs = xrealloc(m->refs, m->nrefs * sizeof(struct module_stat **));
-						m->refs[m->nrefs - 1] = module_stat + mm;
-						break;
-					}
-				}
-			}
-			free(mrefs);
-		}
-
-		if (type & K_SYMBOLS) { /* Want info about symbols */
-			syms = xmalloc(bufsize = 1024);
-			while (query_module(mn, QM_SYMBOLS, syms, bufsize, &ret)) {
-				if (errno == ENOSPC) {
-					syms = xrealloc(syms, bufsize = ret);
-					continue;
-				}
-				if (errno == ENOENT) {
-					/*
-					 * The module was removed out
-					 * from underneath us.
-					 */
-					m->flags = NEW_MOD_DELETED;
-					free(syms);
-					goto next;
-				} else {
-					error("module %s: QM_SYMBOLS: %m", mn);
-					return 0;
-				}
-			}
-			nsyms = ret;
-
-			m->nsyms = nsyms;
-			m->syms = syms;
-
-			/* Convert string offsets to string pointers */
-			for (j = 0, s = syms; j < nsyms; ++j, ++s)
-				s->name += (unsigned long) syms;
-		}
-		next:
-	}
-
-	if (type & K_SYMBOLS) { /* Want info about symbols */
-		/* Collect the kernel's symbols.  */
-		syms = xmalloc(bufsize = 16 * 1024);
-		while (query_module(NULL, QM_SYMBOLS, syms, bufsize, &ret)) {
-			if (errno != ENOSPC) {
-				error("kernel: QM_SYMBOLS: %m");
-				return 0;
-			}
-			syms = xrealloc(syms, bufsize = ret);
-		}
-		nksyms = nsyms = ret;
-		ksyms = syms;
-
-		/* Convert string offsets to string pointers */
-		for (j = 0, s = syms; j < nsyms; ++j, ++s)
-			s->name += (unsigned long) syms;
-	}
-
-	return 1;
-}
-
-#ifdef COMPAT_2_0
-/************************************************************************/
-
-#define mscan(offs,siz,ptr) \
-	if (lseek(kmem_fd, (off_t)(offs), SEEK_SET) == -1 || \
-	    read(kmem_fd, (ptr), (siz)) != (siz)) { \
-		if (kmem_fd != -1) \
-			close(kmem_fd); \
-		error("kmem: %m"); \
-		return 0; \
-	}
-
-#define OLD_MOD_RUNNING 1
-#define OLD_MOD_DELETED 2
-#define OLD_MOD_VISITED   0x20000000
-
-/* Fetch all the symbols and divvy them up as appropriate for the modules.  */
-static int old_get_kernel_info(int type)
-{
-	struct old_kernel_sym *kernsym;
-	struct old_kernel_sym *k;
-	struct module_stat *module;
-	struct module_stat *mod;
-	struct module_symbol *s = NULL;
-	int kmem_fd = -1;
-	int nkernsym;
-	int nmod;
-	int nm;
-	int nms;
-	int i;
-
-	drop();
-	module_name_list = xmalloc(1);
-	*module_name_list = '\0';
-
-	if ((nkernsym = get_kernel_syms(NULL)) < 0) {
-		error("get_kernel_syms: %m");
-		return 0;
-	}
-	kernsym = k = xmalloc(nkernsym * sizeof(struct old_kernel_sym));
-	old_kernsym = kernsym;
-	if (get_kernel_syms(kernsym) != nkernsym) {
-		error("inconsistency with get_kernel_syms -- is someone else "
-		      "playing with modules?");
-		free(kernsym);
-		return 0;
-	}
-
-	/* Number of modules */
-	for (k = kernsym, nmod = 0, i = 0; i < nkernsym; ++i, ++k) {
-		if (k->name[0] == '#') {
-			if (k->name[1]) {
-				++nmod;
-				i = strlen(k->name+1) + 1;
-				module_name_list =
-					xrealloc(module_name_list,
-					l_module_name_list + i);
-				strcpy(module_name_list+l_module_name_list,	/* safe, xrealloc */
-					k->name+1);
-				l_module_name_list += i;	/* NUL separated strings */
-			}
-			else
-				break;
-		}
-	}
-	module_stat = mod = module = xmalloc(nmod * sizeof(struct module_stat));
-	memset(module, 0, nmod * sizeof(struct module_stat));
-	n_module_stat = nmod;
-
-	/*
-	 * Will we need kernel internal info?
-	 */
-	if ((type & K_INFO) || (type & K_REFS)) {
-		if ((kmem_fd = open("/dev/kmem", O_RDONLY)) < 0) {
-			perror("ksyms: open /dev/kmem");
-			return 0;
-		}
-	}
-
-	/*
-	 * Collect the module information.
-	 */
-	for (k = kernsym, nm = 0, i = 0; i < nkernsym; ++i, ++k) {
-		if (k->name[0] == '#') {
-			struct old_kernel_sym *p;
-			struct old_module info;
-
-			if (k->name[1] == '\0')
-				break; /* kernel resident symbols follow */
-			/* else normal module */
-
-			module = mod++;
-			++nm;
-			module->name = k->name + 1;
-			module->modstruct = k->value;
-
-			if ((type & K_INFO) || (type & K_REFS)) {
-				long tmp;
-				/*
-				 * k->value is the address of the
-				 * struct old_module
-				 * in the kernel (for use via /dev/kmem)
-				 */
-				mscan(k->value, sizeof(info), &info);
-				module->addr = info.addr;
-				module->size = info.size * getpagesize();
-
-				mscan(info.addr, sizeof(long), &tmp);
-				module->flags = info.state &
-						(OLD_MOD_RUNNING | OLD_MOD_DELETED);
-				module->flags |= NEW_MOD_USED_ONCE; /* Cheat */
-				if (tmp & OLD_MOD_AUTOCLEAN)
-					module->flags |= NEW_MOD_AUTOCLEAN;
-				if (tmp & OLD_MOD_VISITED)
-					module->flags |= NEW_MOD_VISITED;
-
-				module->usecount = tmp & ~(OLD_MOD_AUTOCLEAN | OLD_MOD_VISITED);
-			}
-
-			if ((type & K_REFS) && info.ref) {
-				struct old_module_ref mr;
-				int j;
-				unsigned long ref = info.ref;
-
-				do {
-					mscan(ref, sizeof(struct old_module_ref), &mr);
-					for (j = 0; j < nm -1; ++j) {
-						if (mr.module == module_stat[j].modstruct) {
-							module->nrefs += 1;
-							module->refs = xrealloc(module->refs, module->nrefs * sizeof(struct module_stat **));
-							module->refs[module->nrefs - 1] = module_stat + j;
-							break;
-						}
-					}
-				} while ((ref = mr.next) != 0);
-			}
-
-			if (!(type & K_SYMBOLS))
-				continue;
-			/*
-			 * Find out how many symbols this module has.
-			 */
-			for (nms = 0, p = k+1; p->name[0] != '#'; ++p)
-				++nms;
-			s = xmalloc(nms * sizeof(struct module_symbol));
-			module->syms = s;
-			module->nsyms = nms;
-		} else if (type & K_SYMBOLS) { /* Want info about symbols */
-			s->name = (unsigned long) k->name;
-			s->value = k->value;
-			++s;
-		}
-	}
-	if ((type & K_INFO) || (type & K_REFS)) {
-		if (kmem_fd != -1)
-			close(kmem_fd);
-	}
-
-	/*
-	 * Kernel resident symbols follows
-	 */
-	if (type & K_SYMBOLS) { /* Want info about symbols */
-		if (k->name[0] == '#')
-			++k;
-		nksyms = nkernsym - (k - kernsym);
-		if (nksyms) {
-			ksyms = s = xmalloc(nksyms * sizeof(struct module_symbol));
-			for (i = 0; i < nksyms; ++i, ++k) {
-				if (k->name[0] != '#') {
-					s->name = (unsigned long) k->name;
-					s->value = k->value;
-					++s;
-				}
-			}
-			nksyms = s - ksyms;
-		} else
-			ksyms = NULL;
-	}
-
-	return 1;
-}
-#endif /* COMPAT_2_0 */
-
-int get_kernel_info(int type)
-{
-	k_new_syscalls = !query_module(NULL, 0, NULL, 0, NULL);
-
-#ifdef COMPAT_2_0
-	if (!k_new_syscalls)
-		return old_get_kernel_info(type);
-#endif /* COMPAT_2_0 */
-
-	return new_get_kernel_info(type);
-}
diff --git a/mdk-stage1/insmod-modutils/util/snap_shot.c b/mdk-stage1/insmod-modutils/util/snap_shot.c
deleted file mode 100644
index ae0cc7c79..000000000
--- a/mdk-stage1/insmod-modutils/util/snap_shot.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/* Take a snap shot of ksyms and modules for Oops debugging
-   Copyright 1999 Linux International.
-
-   Contributed by Keith Owens <kaos@ocs.com.au>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
-  */
-
-#ident "$Id$"
-
-#include <errno.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <time.h>
-#include <unistd.h>
-#include <string.h>
-
-#include "module.h"
-#include "obj.h"
-#include "modstat.h"
-#include "util.h"
-
-static char snap_dir[] = "/var/log/ksymoops";
-
-/* If snap_dir exists, take a snap shot of ksyms and modules to snap_dir.
- * Prefix the files with the equivalent of
- * date +%Y%m%d%T%M%S | sed -e 's/://g'
- */
-void snap_shot(const char *module_names, int n_module_names)
-{
-	char file[] = "ccyymmddhhmmss.modules", buffer[4096];
-	static char *infile[] = { "/proc/ksyms", "/proc/modules" };
-	static char *suffix[] = {       "ksyms",       "modules" };
-	struct tm *local;
-	time_t t;
-	int i, l;
-	FILE *in, *out;
-
-	if (module_names) {
-		/* Only snap shot if the list of modules has changed.
-		 * Otherwise auto cleanup takes a snap shot every time
-		 * and ends up with a large snap shot directory.
-		 */
-		char *new_module_names;
-		size_t n_new_module_names;
-		get_kernel_info(0);
-		new_module_names = module_name_list;
-		n_new_module_names = n_module_stat;
-		if (n_module_names && n_new_module_names == n_module_names) {
-			while (n_module_names) {
-				if (strcmp(module_names, new_module_names))
-					break;	/* difference detected */
-				i = strlen(module_names) + 1;
-				module_names += i;
-				new_module_names += i;
-				--n_module_names;
-			}
-		}
-		if (!n_module_names)
-			return;	/* no difference, no need for snap shot */
-	}
-
-	if (chdir(snap_dir))
-		return;
-	t = time(NULL);
-	local = localtime(&t);
-	for (i = 0; i < sizeof(infile)/sizeof(infile[0]); ++i) {
-		snprintf(file, sizeof(file), "%04d%02d%02d%02d%02d%02d.%s",
-			local->tm_year+1900,
-			local->tm_mon + 1,
-			local->tm_mday,
-			local->tm_hour,
-			local->tm_min,
-			local->tm_sec,
-			suffix[i]);
-		out = fopen(file, "w");
-		if (!out) {
-			error("cannot create %s/%s %m", snap_dir, file);
-			return;
-		}
-		in = fopen(infile[i], "r");
-		if (!in) {
-			error("cannot open %s %m", infile[i]);
-			return;
-		}
-		while ((l = fread(buffer, 1, sizeof(buffer), in)) > 0) {
-			if (fwrite(buffer, l, 1, out) != 1) {
-				error("unable to write to %s %m", file);
-				fclose(in);
-				fclose(out);
-				return;
-			}
-		}
-		if (ferror(in))
-			error("unable to read from %s %m", infile[i]);
-		fclose(in);
-		fclose(out);
-	}
-}
-
-/* If snap_dir exists, log a message to snap_dir.  The log file is called the
- * equivalent of date +%Y%m%d | sed -e 's/://g'.  Each line is prefixed with
- * timestamp down to seconds and followed by a newline.
- */
-void snap_shot_log(const char *fmt,...)
-{
-	char date[] = "ccyymmdd", file[] = "ccyymmdd.log", stamp[] = "ccyymmdd hhmmss";
-	struct tm *local;
-	time_t t;
-	FILE *log;
-	va_list args;
-	int save_errno = errno;
-
-	if (chdir(snap_dir))
-		return;
-	t = time(NULL);
-	local = localtime(&t);
-	snprintf(date, sizeof(date), "%04d%02d%02d",
-			local->tm_year+1900,
-			local->tm_mon + 1,
-			local->tm_mday);
-	snprintf(file, sizeof(file), "%s.log", date);
-	log = fopen(file, "a");
-	if (!log) {
-		error("cannot create %s/%s %m", snap_dir, file);
-		return;
-	}
-	snprintf(stamp, sizeof(stamp), "%s %02d%02d%02d",
-		date,
-		local->tm_hour,
-		local->tm_min,
-		local->tm_sec);
-	fprintf(log, "%s ", stamp);
-	va_start(args, fmt);
-	errno = save_errno;	/* fmt may use %m */
-	vfprintf(log, fmt, args);
-	va_end(args);
-	fprintf(log, "\n");
-	fclose(log);
-}
diff --git a/mdk-stage1/insmod-modutils/util/sys_cm.c b/mdk-stage1/insmod-modutils/util/sys_cm.c
deleted file mode 100644
index 851fb709e..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_cm.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* Functions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
-   _syscall* defined.  */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-#if defined(__i386__) || defined(__m68k__) || defined(__arm__)
-
-#define __NR__create_module  __NR_create_module
-static inline _syscall2(long, _create_module, const char *, name, size_t, size)
-
-unsigned long create_module(const char *name, size_t size)
-{
-  /* Why all this fuss?
-
-     In linux 2.1, the address returned by create module point in
-     kernel space which is now mapped at the top of user space (at
-     0xc0000000 on i386). This looks like a negative number for a
-     long. The normal syscall macro of linux 2.0 (and all libc compile
-     with linux 2.0 or below) consider that the return value is a
-     negative number and consider it is an error number (A kernel
-     convention, return value are positive or negative, indicating the
-     error number).
-
-     By checking the value of errno, we know if we have been fooled by
-     the syscall2 macro and we fix it.  */
-
-  long ret = _create_module(name, size);
-  if (ret == -1 && errno > 125)
-    {
-      ret = -errno;
-      errno = 0;
-    }
-  return ret;
-}
-
-#elif defined(__alpha__)
-
-/* Alpha doesn't have the same problem, exactly, but a bug in older
-   kernels fails to clear the error flag.  Clear it here explicitly.  */
-
-#define __NR__create_module  __NR_create_module
-static inline _syscall4(unsigned long, _create_module, const char *, name,
-			size_t, size, size_t, dummy, size_t, err);
-
-unsigned long create_module(const char *name, size_t size)
-{
-  return _create_module(name, size, 0, 0);
-}
-
-#else
-
-/* Sparc, MIPS, (and Alpha, but that's another problem) don't mistake
-   return values for errors due to the nature of the system call.  */
-
-_syscall2(unsigned long, create_module, const char *, name, size_t, size)
-
-#endif
diff --git a/mdk-stage1/insmod-modutils/util/sys_dm.c b/mdk-stage1/insmod-modutils/util/sys_dm.c
deleted file mode 100644
index a166a30f4..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_dm.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Functions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
-   _syscall* defined.  */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-_syscall1(int, delete_module, const char *, name)
diff --git a/mdk-stage1/insmod-modutils/util/sys_gks.c b/mdk-stage1/insmod-modutils/util/sys_gks.c
deleted file mode 100644
index f71772c71..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_gks.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Functions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
-   _syscall* defined.  */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-_syscall1(int, get_kernel_syms, struct old_kernel_sym *, ksyms)
diff --git a/mdk-stage1/insmod-modutils/util/sys_nim.c b/mdk-stage1/insmod-modutils/util/sys_nim.c
deleted file mode 100644
index bbe42135c..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_nim.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/* Functions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
-   _syscall* defined.  */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-#ifndef CONFIG_USE_SYSCALL
-
-extern int init_module(const char *name, const struct module *info);
-
-int 
-sys_init_module(const char *name, const struct module *info)
-{
-  return init_module(name, info);
-}
-
-#else
-
-#define __NR_sys_init_module  __NR_init_module
-_syscall2(int, sys_init_module, const char *, name,
-	  const struct module *, info)
-
-#endif
diff --git a/mdk-stage1/insmod-modutils/util/sys_oim.c b/mdk-stage1/insmod-modutils/util/sys_oim.c
deleted file mode 100644
index 73ac6be52..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_oim.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Functions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
-   _syscall* defined.  */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-#define __NR_old_sys_init_module  __NR_init_module
-_syscall5(int, old_sys_init_module, const char *, name, char *, code,
-	  unsigned, codesize, struct old_mod_routines *, routines,
-	  struct old_symbol_table *, symtab)
diff --git a/mdk-stage1/insmod-modutils/util/sys_qm.c b/mdk-stage1/insmod-modutils/util/sys_qm.c
deleted file mode 100644
index 119a219a2..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_qm.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/* Functions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
-   _syscall* defined.  */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-/* I am fucking tired of the "this doesn't build on 2.0.x" questions.
-   But if you ask, we still officially require 2.1.x to build.  */
-#if !defined(__NR_query_module)
-# if defined(__i386__)
-#  define __NR_query_module 167
-# elif defined(__alpha__)
-#  define __NR_query_module 347
-# elif defined(__sparc__)
-#  define __NR_query_module 184
-# elif defined(__mc68000__)
-#  define __NR_query_module 167
-# elif defined(__arm__)
-#  define __NR_query_module (__NR_SYSCALL_BASE + 167)
-# elif defined(__mips__)
-#  define __NR_query_module 4187
-# endif
-#endif
-
-_syscall5(int, query_module, const char *, name, int, which,
-	  void *, buf, size_t, bufsize, size_t *, ret);
diff --git a/mdk-stage1/insmod-modutils/util/xftw.c b/mdk-stage1/insmod-modutils/util/xftw.c
deleted file mode 100644
index fe764a63c..000000000
--- a/mdk-stage1/insmod-modutils/util/xftw.c
+++ /dev/null
@@ -1,422 +0,0 @@
-/*
- * modutils specific implementation of ftw().
- *
- * Copyright 2000:
- *  Keith Owens <kaos@ocs.com.au> August 2000
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
-    modutils requires special processing during the file tree walk
-    of /lib/modules/<version> and any paths that the user specifies.
-    The standard ftw() does a blind walk of all paths and can end
-    up following the build symlink down the kernel source tree.
-    Although nftw() has the option to get more control such as not
-    automatically following symbolic links, even that is not enough
-    for modutils.  The requirements are:
-
-    Paths must be directories or symlinks to directories.
-
-    Each directory is read and sorted into alphabetical order
-    before processing.
-
-    A directory is type 1 iff it was specified on a path statement
-    (either explicit or default) and the directory contains a
-    subdirectory with one of the known names and the directory name
-    does not end with "/kernel".  Otherwise it is type 2.
-
-    In a type 1 directory, walk the kernel subdirectory if it exists,
-    then the old known names in their historical order then any
-    remaining directory entries in alphabetical order and finally any
-    non-directory entries in alphabetical order.
-
-    Entries in a type 1 directory are filtered against the "prune"
-    list.  A type 1 directory can contain additional files which
-    are not modules nor symlinks to modules.  The prune list skips
-    known additional files, if a distribution wants to store
-    additional text files in the top level directory they should be
-    added to the prune list.
-
-    A type 2 directory must contain only modules or symlinks to
-    modules.  They are processed in alphabetical order, without
-    pruning.  Symlinks to directories are an error in type 2
-    directories.
-
-    The user function is not called for type 1 directories, nor for
-    pruned entries.  It is called for type 2 directories and their
-    contents.  It is also called for any files left in a type 1
-    directory after pruning and processing type 2 subdirectories.
-    The user function never sees symlinks, they are resolved before
-    calling the function.
-
-    Why have different directory types?  The original file tree
-    walk was not well defined.  Some users specified each directory
-    individually, others just pointed at the top level directory.
-    Either version worked until the "build" symlink was added.  Now
-    users who specify the top level directory end up running the
-    entire kernel source tree looking for modules, not nice.  We
-    cannot just ignore symlinks because pcmcia uses symlinks to
-    modules for backwards compatibility.
-
-    Type 1 is when a user specifies the top level directory which needs
-    special processing, type 2 is individual subdirectories.  But the
-    only way to tell the difference is by looking at the contents.  The
-    "/kernel" directory introduced in 2.3.12 either contains nothing
-    (old make modules_install) or contains all the kernel modules using
-    the same tree structure as the source.  Because "/kernel" can
-    contain old names but is really a type 2 directory, it is detected
-    as a special case.
- */
-
-#include <dirent.h>
-#include <errno.h>
-#include <limits.h>
-#include <malloc.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/stat.h>
-
-#include "util.h"
-#include "config.h"
-
-extern char *tbpath[];
-
-extern OPT_LIST *prune_list;
-extern int n_prune_list;
-
-extern char *tbtype[];
-
-struct xftw_dirent {
-    struct stat statbuf;
-    char *name;
-    char *fullname;
-};
-
-#define XFTW_MAXDEPTH 64    /* Maximum directory depth handled */
-
-typedef struct {
-    struct xftw_dirent *contents;
-    int size;
-    int used;
-} xftw_tree_t;
-
-static xftw_tree_t tree[XFTW_MAXDEPTH];
-
-/* Free all data for one tree level */
-static void xftw_free_tree(int depth)
-{
-    int i;
-    xftw_tree_t *t = tree+depth;
-    for (i = 0; i < t->size; ++i) {
-	free(t->contents[i].name);
-	free(t->contents[i].fullname);
-    }
-    free(t->contents);
-    t->contents = NULL;
-    t->size = 0;
-    t->used = 0;
-}
-
-/* Increment dirents used at this depth, resizing if necessary */
-static void xftw_add_dirent(int depth)
-{
-    xftw_tree_t *t = tree+depth;
-    int i, size = t->size;
-    if (++t->used < size)
-	return;
-    size += 10; /* arbitrary increment */
-    t->contents = xrealloc(t->contents, size*sizeof(*(t->contents)));
-    for (i = t->size; i < size; ++i) {
-	memset(&(t->contents[i].statbuf), 0, sizeof(t->contents[i].statbuf));
-	t->contents[i].name = NULL;
-	t->contents[i].fullname = NULL;
-    }
-    t->size = size;
-}
-
-/* Concatenate directory name and entry name into one string.
- * Note: caller must free result or leak.
- */
-static char *xftw_dir_name(const char *directory, const char *entry)
-{
-    int i = strlen(directory);
-    char *name;
-    if (entry)
-	i += strlen(entry);
-    i += 2;
-    name = xmalloc(i);
-    strcpy(name, directory);	/* safe, xmalloc */
-    if (*directory && entry)
-	strcat(name, "/");	/* safe, xmalloc */
-    if (entry)
-	strcat(name, entry);	/* safe, xmalloc */
-    return(name);
-}
-
-/* Call the user function for a directory entry */
-static int xftw_do_name(const char *directory, const char *entry, struct stat *sb, xftw_func_t funcptr)
-{
-    int ret = 0;
-    char *name = xftw_dir_name(directory, entry);
-
-    if (S_ISLNK(sb->st_mode)) {
-	char real[PATH_MAX], *newname;
-	verbose("resolving %s symlink to ", name);
-	if (!(newname = realpath(name, real))) {
-	    if (errno == ENOENT) {
-		verbose("%s: does not exist, dangling symlink ignored\n", real);
-		goto cleanup;
-	    }
-	    perror("... failed");
-	    goto cleanup;
-	}
-	verbose("%s ", newname);
-	if (lstat(newname, sb)) {
-	    error("lstat on %s failed ", newname);
-	    perror("");
-	    goto cleanup;
-	}
-	free(name);
-	name = xstrdup(newname);
-    }
-
-    if (!S_ISREG(sb->st_mode) &&
-	!S_ISDIR(sb->st_mode)) {
-	error("%s is not plain file nor directory\n", name);
-	goto cleanup;
-    }
-	
-    verbose("user function %s\n", name);
-    ret = (*funcptr)(name, sb);
-cleanup:
-    free(name);
-    return(ret);
-}
-
-/* Sort directory entries into alphabetical order */
-static int xftw_sortdir(const void *a, const void *b)
-{
-    return(strcmp(((struct xftw_dirent *)a)->name, ((struct xftw_dirent *)b)->name));
-}
-
-/* Read a directory and sort it, ignoring "." and ".." */
-static int xftw_readdir(const char *directory, int depth)
-{
-    DIR *d;
-    struct dirent *ent;
-    verbose("xftw_readdir %s\n", directory);
-    if (!(d = opendir(directory))) {
-	perror(directory);
-	return(1);
-    }
-    while ((ent = readdir(d))) {
-	char *name;
-	struct xftw_dirent *f;
-	if (strcmp(ent->d_name, ".") == 0 ||
-	    strcmp(ent->d_name, "..") == 0)
-	    continue;
-	name = xftw_dir_name(directory, ent->d_name);
-	xftw_add_dirent(depth); 
-	f = tree[depth].contents+tree[depth].used-1;
-	f->name = xstrdup(ent->d_name);
-	f->fullname = name;     /* do not free name, it is in use */
-	if (lstat(name, &(f->statbuf))) {
-	    perror(name);
-	    return(1);
-	}
-    }
-    closedir(d);
-    qsort(tree[depth].contents, tree[depth].used, sizeof(*(tree[0].contents)), &xftw_sortdir);
-    return(0);
-}
-
-/* Process a type 2 directory */
-int xftw_type2(const char *directory, const char *entry, int depth, xftw_func_t funcptr)
-{
-    int ret, i;
-    xftw_tree_t *t = tree+depth;
-    struct stat statbuf;
-    char *dirname = xftw_dir_name(directory, entry);
-
-    verbose("type 2 %s\n", dirname);
-    if (depth > XFTW_MAXDEPTH) {
-	error("xftw_type2 exceeded maxdepth\n");
-	ret = 1;
-	goto cleanup;
-    }
-    if ((ret = xftw_readdir(dirname, depth)))
-	goto cleanup;
-
-    t = tree+depth;
-    /* user function sees type 2 directories */
-    if ((ret = lstat(dirname, &statbuf)) ||
-	(ret = xftw_do_name("", dirname, &statbuf, funcptr)))
-	goto cleanup;
-
-    /* user sees all contents of type 2 directory, no pruning */
-    for (i = 0; i < t->used; ++i) {
-	struct xftw_dirent *c = t->contents+i;
-	if (S_ISLNK(c->statbuf.st_mode)) {
-	    if (!stat(c->name, &(c->statbuf))) {
-		if (S_ISDIR(c->statbuf.st_mode)) {
-		    error("symlink to directory is not allowed, %s ignored\n", c->name);
-		    *(c->name) = '\0';  /* ignore it */
-		}
-	    }
-	}
-	if (!*(c->name))
-	    continue;
-	if (S_ISDIR(c->statbuf.st_mode)) {
-	    /* recursion is the curse of the programming classes */
-	    ret = xftw_type2(dirname, c->name, depth+1, funcptr);
-	    if (ret)
-		goto cleanup;
-	}
-	else if ((ret = xftw_do_name(dirname, c->name, &(c->statbuf), funcptr)))
-	    goto cleanup;
-	*(c->name) = '\0';  /* processed */
-    }
-
-    ret = 0;
-cleanup:
-    free(dirname);
-    return(ret);
-}
-
-/* Only external visible function.  Decide on the type of directory and
- * process accordingly.
- */
-int xftw(const char *directory, xftw_func_t funcptr)
-{
-    struct stat statbuf;
-    int ret, i, j, type;
-    xftw_tree_t *t;
-    struct xftw_dirent *c;
-
-    verbose("xftw starting at %s ", directory);
-    if (lstat(directory, &statbuf)) {
-	verbose("lstat on %s failed\n", directory);
-	return(0);
-    }
-    if (S_ISLNK(statbuf.st_mode)) {
-	char real[PATH_MAX];
-	verbose("resolving symlink to ");
-	if (!(directory = realpath(directory, real))) {
-	    if (errno == ENOENT) {
-		verbose("%s: does not exist, dangling symlink ignored\n", real);
-		return(0);
-	    }
-	    perror("... failed");
-	    return(-1);
-	}
-	verbose("%s ", directory);
-	if (lstat(directory, &statbuf)) {
-	    error("lstat on %s failed ", directory);
-	    perror("");
-	    return(-1);
-	}
-    }
-    if (!S_ISDIR(statbuf.st_mode)) {
-	error("%s is not a directory\n", directory);
-	return(-1);
-    }
-    verbose("\n");
-
-    /* All returns after this point must be via cleanup */
-
-    if ((ret = xftw_readdir(directory, 0)))
-	goto cleanup;
-
-    t = tree;   /* depth 0 */
-    type = 2;
-    for (i = 0 ; type == 2 && i < t->used; ++i) {
-	c = t->contents+i;
-	for (j = 0; tbtype[j]; ++j) {
-	    if (strcmp(c->name, tbtype[j]) == 0 &&
-		S_ISDIR(c->statbuf.st_mode)) {
-		const char *p = directory + strlen(directory) - 1;
-		if (*p == '/')
-		    --p;
-		if (p - directory >= 6 && strncmp(p-6, "/kernel", 7) == 0)
-		    continue;	/* "/kernel" path is a special case, type 2 */
-		type = 1;   /* known subdirectory */
-		break;
-	    }
-	}
-    }
-
-    if (type == 1) {
-	OPT_LIST *p;
-	/* prune entries in type 1 directories only */
-	for (i = 0 ; i < t->used; ++i) {
-	    for (p = prunelist; p->name; ++p) {
-		c = t->contents+i;
-		if (strcmp(p->name, c->name) == 0) {
-		    verbose("pruned %s\n", c->name);
-		    *(c->name) = '\0';  /* ignore */
-		}
-	    }
-	}
-	/* run known subdirectories first in historical order, "kernel" is now top of list */
-	for (i = 0 ; i < t->used; ++i) {
-	    c = t->contents+i;
-	    for (j = 0; tbtype[j]; ++j) {
-		if (*(c->name) &&
-		    strcmp(c->name, tbtype[j]) == 0 &&
-		    S_ISDIR(c->statbuf.st_mode)) {
-		    if ((ret = xftw_type2(directory, c->name, 1, funcptr)))
-			goto cleanup;
-		    *(c->name) = '\0';  /* processed */
-		}
-	    }
-	}
-	/* any other directories left, in alphabetical order */
-	for (i = 0 ; i < t->used; ++i) {
-	    c = t->contents+i;
-	    if (*(c->name) &&
-	        S_ISDIR(c->statbuf.st_mode)) {
-		if ((ret = xftw_type2(directory, c->name, 1, funcptr)))
-		    goto cleanup;
-		*(c->name) = '\0';  /* processed */
-	    }
-	}
-	/* anything else is passed to the user function */
-	for (i = 0 ; i < t->used; ++i) {
-	    c = t->contents+i;
-	    if (*(c->name)) {
-		verbose("%s found in type 1 directory %s\n", c->name, directory);
-		if ((ret = xftw_do_name(directory, c->name, &(c->statbuf), funcptr)))
-		    goto cleanup;
-		*(c->name) = '\0';  /* processed */
-	    }
-	}
-    }
-    else {
-	/* type 2 */
-	xftw_free_tree(0);
-	if ((ret = xftw_type2(directory, NULL, 0, funcptr)))
-	    goto cleanup;
-    }
-
-    /* amazing, it all worked */
-    ret = 0;
-cleanup:
-    for (i = 0; i < XFTW_MAXDEPTH; ++i)
-	xftw_free_tree(i);
-    return(ret);
-}
diff --git a/mdk-stage1/insmod-modutils/util/xmalloc.c b/mdk-stage1/insmod-modutils/util/xmalloc.c
deleted file mode 100644
index 9113d47fe..000000000
--- a/mdk-stage1/insmod-modutils/util/xmalloc.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Misc utility functions.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include "util.h"
-
-
-/*======================================================================*/
-
-void *
-xmalloc(size_t size)
-{
-  void *ptr = malloc(size);
-  if (!ptr)
-    {
-      error("Out of memory");
-      exit(1);
-    }
-  return ptr;
-}
diff --git a/mdk-stage1/insmod-modutils/util/xrealloc.c b/mdk-stage1/insmod-modutils/util/xrealloc.c
deleted file mode 100644
index d287486f7..000000000
--- a/mdk-stage1/insmod-modutils/util/xrealloc.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Misc utility functions.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include "util.h"
-
-
-/*======================================================================*/
-
-void *
-xrealloc(void *old, size_t size)
-{
-  void *ptr = realloc(old, size);
-  if (!ptr)
-    {
-      error("Out of memory");
-      exit(1);
-    }
-  return ptr;
-}
diff --git a/mdk-stage1/insmod-modutils/util/xstrcat.c b/mdk-stage1/insmod-modutils/util/xstrcat.c
deleted file mode 100644
index abb075c83..000000000
--- a/mdk-stage1/insmod-modutils/util/xstrcat.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Misc utility functions.
-   Copyright 2000 Keith Owens <kaos@ocs.com.au>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id"
-
-#include <stdlib.h>
-#include <string.h>
-#include "util.h"
-
-
-/*======================================================================*/
-
-char *
-xstrcat(char *dest, const char *src, size_t size)
-{
-  int ldest = strlen(dest);
-  int lsrc = strlen(src);
-  if ((size - ldest - 1) < lsrc) {
-    error("xstrcat: destination overflow");
-    exit(1);
-  }
-  memcpy(dest+ldest, src, lsrc+1);
-  return(dest);
-}
diff --git a/mdk-stage1/insmod-modutils/util/xstrdup.c b/mdk-stage1/insmod-modutils/util/xstrdup.c
deleted file mode 100644
index 11b289eb0..000000000
--- a/mdk-stage1/insmod-modutils/util/xstrdup.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* Misc utility functions.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include "util.h"
-
-
-/*======================================================================*/
-
-char *
-xstrdup(const char *s)
-{
-  char *n = strdup(s);
-  if (!n)
-    {
-      error("Out of memory");
-      exit(1);
-    }
-  return n;
-}
diff --git a/mdk-stage1/insmod-modutils/util/xsystem.c b/mdk-stage1/insmod-modutils/util/xsystem.c
deleted file mode 100644
index edb995268..000000000
--- a/mdk-stage1/insmod-modutils/util/xsystem.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/* Misc utility functions.
-   Copyright 2000 Keith Owens <kaos@ocs.com.au>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ident "$Id"
-
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <errno.h>
-#include <unistd.h>
-
-
-/*======================================================================*/
-
-/* Clone of the system() function From Steven's Advanced Programming in a Unix
- * Environment.  Modified to use *argv[] and execvp to avoid shell expansion
- * problems, modutils runs as root so system() is unsafe.
- */
-
-int
-xsystem(const char *file, char *const argv[])
-{
-  pid_t pid;
-  int status;
-  if ((pid = fork()) < 0)
-    return(-1);
-  if (pid == 0) {
-    execvp(file, argv);
-    _exit(127);
-  }
-  while (waitpid(pid, &status, 0) < 0) {
-    if (errno != EINTR)
-      return(-1);
-  }
-  return(status);
-}
diff --git a/mdk-stage1/insmod.h b/mdk-stage1/insmod.h
deleted file mode 100644
index d91f239cf..000000000
--- a/mdk-stage1/insmod.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _INSMOD_INTERFACE_H_
-#define _INSMOD_INTERFACE_H_
-
-int insmod_call(char * full_filename, char * params);
-
-#endif
diff --git a/mdk-stage1/linux-2.2/nfs.h b/mdk-stage1/linux-2.2/nfs.h
deleted file mode 100644
index 7936d5a71..000000000
--- a/mdk-stage1/linux-2.2/nfs.h
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * NFS protocol definitions
- */
-#ifndef _LINUX_NFS_H
-#define _LINUX_NFS_H
-
-#include <linux/sunrpc/msg_prot.h>
-
-#define NFS_PORT	2049
-#define NFS_MAXDATA	8192
-#define NFS_MAXPATHLEN	1024
-#define NFS_MAXNAMLEN	255
-#define NFS_MAXGROUPS	16
-#define NFS_FHSIZE	32
-#define NFS_COOKIESIZE	4
-#define NFS_FIFO_DEV	(-1)
-#define NFSMODE_FMT	0170000
-#define NFSMODE_DIR	0040000
-#define NFSMODE_CHR	0020000
-#define NFSMODE_BLK	0060000
-#define NFSMODE_REG	0100000
-#define NFSMODE_LNK	0120000
-#define NFSMODE_SOCK	0140000
-#define NFSMODE_FIFO	0010000
-
-	
-enum nfs_stat {
-	NFS_OK = 0,
-	NFSERR_PERM = 1,
-	NFSERR_NOENT = 2,
-	NFSERR_IO = 5,
-	NFSERR_NXIO = 6,
-	NFSERR_EAGAIN = 11,
-	NFSERR_ACCES = 13,
-	NFSERR_EXIST = 17,
-	NFSERR_XDEV = 18,
-	NFSERR_NODEV = 19,
-	NFSERR_NOTDIR = 20,
-	NFSERR_ISDIR = 21,
-	NFSERR_INVAL = 22,	/* that Sun forgot */
-	NFSERR_FBIG = 27,
-	NFSERR_NOSPC = 28,
-	NFSERR_ROFS = 30,
-	NFSERR_OPNOTSUPP = 45,
-	NFSERR_NAMETOOLONG = 63,
-	NFSERR_NOTEMPTY = 66,
-	NFSERR_DQUOT = 69,
-	NFSERR_STALE = 70,
-	NFSERR_WFLUSH = 99
-};
-
-enum nfs_ftype {
-	NFNON = 0,
-	NFREG = 1,
-	NFDIR = 2,
-	NFBLK = 3,
-	NFCHR = 4,
-	NFLNK = 5,
-	NFSOCK = 6,
-	NFBAD = 7,
-	NFFIFO = 8
-};
-
-struct nfs_fh {
-	char			data[NFS_FHSIZE];
-};
-
-#define NFS_PROGRAM		100003
-#define NFS_VERSION		2
-#define NFSPROC_NULL		0
-#define NFSPROC_GETATTR		1
-#define NFSPROC_SETATTR		2
-#define NFSPROC_ROOT		3
-#define NFSPROC_LOOKUP		4
-#define NFSPROC_READLINK	5
-#define NFSPROC_READ		6
-#define NFSPROC_WRITECACHE	7
-#define NFSPROC_WRITE		8
-#define NFSPROC_CREATE		9
-#define NFSPROC_REMOVE		10
-#define NFSPROC_RENAME		11
-#define NFSPROC_LINK		12
-#define NFSPROC_SYMLINK		13
-#define NFSPROC_MKDIR		14
-#define NFSPROC_RMDIR		15
-#define NFSPROC_READDIR		16
-#define NFSPROC_STATFS		17
-
-/* Mount support for NFSroot */
-#ifdef __KERNEL__
-#define NFS_MNT_PROGRAM		100005
-#define NFS_MNT_VERSION		1
-#define NFS_MNT_PORT		627
-#define NFS_MNTPROC_MNT		1
-#define NFS_MNTPROC_UMNT	3
-#endif
-
-#if defined(__KERNEL__) || defined(NFS_NEED_KERNEL_TYPES)
-
-extern struct rpc_program	nfs_program;
-extern struct rpc_stat		nfs_rpcstat;
-
-struct nfs_time {
-	__u32			seconds;
-	__u32			useconds;
-};
-
-struct nfs_fattr {
-	enum nfs_ftype		type;
-	__u32			mode;
-	__u32			nlink;
-	__u32			uid;
-	__u32			gid;
-	__u32			size;
-	__u32			blocksize;
-	__u32			rdev;
-	__u32			blocks;
-	__u32			fsid;
-	__u32			fileid;
-	struct nfs_time		atime;
-	struct nfs_time		mtime;
-	struct nfs_time		ctime;
-};
-
-struct nfs_sattr {
-	__u32			mode;
-	__u32			uid;
-	__u32			gid;
-	__u32			size;
-	struct nfs_time		atime;
-	struct nfs_time		mtime;
-};
-
-struct nfs_fsinfo {
-	__u32			tsize;
-	__u32			bsize;
-	__u32			blocks;
-	__u32			bfree;
-	__u32			bavail;
-};
-
-struct nfs_writeargs {
-	struct nfs_fh *		fh;
-	__u32			offset;
-	__u32			count;
-	const void *		buffer;
-};
-
-#ifdef NFS_NEED_XDR_TYPES
-
-struct nfs_sattrargs {
-	struct nfs_fh *		fh;
-	struct nfs_sattr *	sattr;
-};
-
-struct nfs_diropargs {
-	struct nfs_fh *		fh;
-	const char *		name;
-};
-
-struct nfs_readargs {
-	struct nfs_fh *		fh;
-	__u32			offset;
-	__u32			count;
-	void *			buffer;
-};
-
-struct nfs_createargs {
-	struct nfs_fh *		fh;
-	const char *		name;
-	struct nfs_sattr *	sattr;
-};
-
-struct nfs_renameargs {
-	struct nfs_fh *		fromfh;
-	const char *		fromname;
-	struct nfs_fh *		tofh;
-	const char *		toname;
-};
-
-struct nfs_linkargs {
-	struct nfs_fh *		fromfh;
-	struct nfs_fh *		tofh;
-	const char *		toname;
-};
-
-struct nfs_symlinkargs {
-	struct nfs_fh *		fromfh;
-	const char *		fromname;
-	const char *		topath;
-	struct nfs_sattr *	sattr;
-};
-
-struct nfs_readdirargs {
-	struct nfs_fh *		fh;
-	__u32			cookie;
-	void *			buffer;
-	unsigned int		bufsiz;
-};
-
-struct nfs_diropok {
-	struct nfs_fh *		fh;
-	struct nfs_fattr *	fattr;
-};
-
-struct nfs_readres {
-	struct nfs_fattr *	fattr;
-	unsigned int		count;
-};
-
-struct nfs_readlinkres {
-	char **			string;
-	unsigned int *		lenp;
-	unsigned int		maxlen;
-	void *			buffer;
-};
-
-struct nfs_readdirres {
-	void *			buffer;
-	unsigned int		bufsiz;
-};
-
-#endif /* NFS_NEED_XDR_TYPES */
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/mdk-stage1/linux-2.2/nfs_mount.h b/mdk-stage1/linux-2.2/nfs_mount.h
deleted file mode 100644
index 60493b150..000000000
--- a/mdk-stage1/linux-2.2/nfs_mount.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _LINUX_NFS_MOUNT_H
-#define _LINUX_NFS_MOUNT_H
-
-/*
- *  linux/include/linux/nfs_mount.h
- *
- *  Copyright (C) 1992  Rick Sladkey
- *
- *  structure passed from user-space to kernel-space during an nfs mount
- */
-
-/*
- * WARNING!  Do not delete or change the order of these fields.  If
- * a new field is required then add it to the end.  The version field
- * tracks which fields are present.  This will ensure some measure of
- * mount-to-kernel version compatibility.  Some of these aren't used yet
- * but here they are anyway.
- */
-#define NFS_MOUNT_VERSION	3
-
-struct nfs_mount_data {
-	int		version;		/* 1 */
-	int		fd;			/* 1 */
-	struct nfs_fh	root;			/* 1 */
-	int		flags;			/* 1 */
-	int		rsize;			/* 1 */
-	int		wsize;			/* 1 */
-	int		timeo;			/* 1 */
-	int		retrans;		/* 1 */
-	int		acregmin;		/* 1 */
-	int		acregmax;		/* 1 */
-	int		acdirmin;		/* 1 */
-	int		acdirmax;		/* 1 */
-	struct sockaddr_in addr;		/* 1 */
-	char		hostname[256];		/* 1 */
-	int		namlen;			/* 2 */
-	unsigned int	bsize;			/* 3 */
-};
-
-/* bits in the flags field */
-
-#define NFS_MOUNT_SOFT		0x0001	/* 1 */
-#define NFS_MOUNT_INTR		0x0002	/* 1 */
-#define NFS_MOUNT_SECURE	0x0004	/* 1 */
-#define NFS_MOUNT_POSIX		0x0008	/* 1 */
-#define NFS_MOUNT_NOCTO		0x0010	/* 1 */
-#define NFS_MOUNT_NOAC		0x0020	/* 1 */
-#define NFS_MOUNT_TCP		0x0040	/* 2 */
-#define NFS_MOUNT_VER3		0x0080	/* 3 */
-#define NFS_MOUNT_KERBEROS	0x0100	/* 3 */
-#define NFS_MOUNT_NONLM		0x0200	/* 3 */
- 
-#endif
diff --git a/mdk-stage1/log.c b/mdk-stage1/log.c
deleted file mode 100644
index 319079fd7..000000000
--- a/mdk-stage1/log.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <string.h>
-#include <time.h>
-#include <errno.h>
-#include "stage1.h"
-
-#include "log.h"
-
-static FILE * logtty  = NULL;
-static FILE * logfile = NULL;
-
-
-void vlog_message(const char * s, va_list args)
-{
-	if (logfile) {
-		fprintf(logfile, "* ");
-		vfprintf(logfile, s, args);
-		fprintf(logfile, "\n");
-		fflush(logfile);
-	}
-	if (logtty) {
-		fprintf(logtty, "* ");
-		vfprintf(logtty, s, args);
-		fprintf(logtty, "\n");
-		fflush(logtty);
-	}
-}
-
-
-void log_message(const char * s, ...)
-{
-	va_list args;
-	va_start(args, s);
-	vlog_message(s, args);
-	va_end(args);
-	
-	return;
-}
-
-void log_perror(char *msg)
-{
-	log_message("%s: %s", msg, strerror(errno));
-}
-
-
-void open_log(void)
-{
-	if (!IS_TESTING) {
-		logtty  = fopen("/dev/tty3", "w");
-		logfile = fopen("/tmp/stage1.log", "w");
-	}
-	else
-		logfile = fopen("debug.log", "w");
-}
-
-void close_log(void)
-{
-	if (logfile) {
-		log_message("stage1: disconnecting life support systems");
-		fclose(logfile);
-		if (logtty)
-			fclose(logtty);
-	}
-}
diff --git a/mdk-stage1/log.h b/mdk-stage1/log.h
deleted file mode 100644
index 90aa3f6e6..000000000
--- a/mdk-stage1/log.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-
-#ifndef _LOG_H_
-#define _LOG_H_
-
-#include <stdarg.h>
-
-void log_message(const char * s, ...) __attribute__ ((format (printf, 1, 2)));
-void vlog_message(const char * s, va_list args);
-void log_perror(char *msg);
-void open_log(void);
-void close_log(void);
-
-#endif
diff --git a/mdk-stage1/lomount.c b/mdk-stage1/lomount.c
deleted file mode 100644
index 991a862c7..000000000
--- a/mdk-stage1/lomount.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/* This code comes from util-linux-2.10n (mount/lomount.c)
- * (this is a simplified version of this code)
- */
-
-#include <sys/types.h>
-#include <sys/mount.h>
-#include <sys/ioctl.h>
-#include <sys/mount.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-
-#include "stage1.h"
-#include "frontend.h"
-#include "log.h"
-#include "mount.h"
-#include "modules.h"
-
-#include "lomount.h"
-
-
-#define LO_NAME_SIZE	64
-#define LO_KEY_SIZE	32
-
-struct loop_info
-{
-	int		lo_number;	/* ioctl r/o */
-	dev_t		lo_device; 	/* ioctl r/o */
-	unsigned long	lo_inode; 	/* ioctl r/o */
-	dev_t		lo_rdevice; 	/* ioctl r/o */
-	int		lo_offset;
-	int		lo_encrypt_type;
-	int		lo_encrypt_key_size; 	/* ioctl w/o */
-	int		lo_flags;	/* ioctl r/o */
-	char		lo_name[LO_NAME_SIZE];
-	unsigned char	lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
-	unsigned long	lo_init[2];
-	char		reserved[4];
-};
-
-#define LOOP_SET_FD	0x4C00
-#define LOOP_CLR_FD	0x4C01
-#define LOOP_SET_STATUS	0x4C02
-#define LOOP_GET_STATUS	0x4C03
-
-int
-set_loop (const char *device, const char *file)
-{
-	struct loop_info loopinfo;
-	int fd, ffd, mode;
-
-	mode = O_RDONLY;
-
-	if ((ffd = open (file, mode)) < 0)
-		return 1;
-  
-	if ((fd = open (device, mode)) < 0) {
-		close(ffd);
-		return 1;
-	}
-
-	memset(&loopinfo, 0, sizeof (loopinfo));
-	strncpy(loopinfo.lo_name, file, LO_NAME_SIZE);
-	loopinfo.lo_name[LO_NAME_SIZE - 1] = 0;
-	loopinfo.lo_offset = 0;
-
-#ifdef MCL_FUTURE  
-	/*
-	 * Oh-oh, sensitive data coming up. Better lock into memory to prevent
-	 * passwd etc being swapped out and left somewhere on disk.
-	 */
-  
-	  if(mlockall(MCL_CURRENT|MCL_FUTURE)) {
-		  log_message("CRITICAL Couldn't lock into memory! %s (memlock)", strerror(errno));
-		  return 1;
-	  }
-#endif
-
-	if (ioctl(fd, LOOP_SET_FD, ffd) < 0) {
-		close(fd);
-		close(ffd);
-		return 1;
-	}
-
-	if (ioctl(fd, LOOP_SET_STATUS, &loopinfo) < 0) {
-		(void) ioctl (fd, LOOP_CLR_FD, 0);
-		close(fd);
-		close(ffd);
-		return 1;
-	}
-
-	close(fd);
-	close(ffd);
-	return 0;
-}
-
-
-char * loopdev = "/dev/loop3"; /* Ugly. But do I care? */
-
-void
-del_loop(void)
-{
-	int fd;
-
-	if ((fd = open (loopdev, O_RDONLY)) < 0)
-		return;
-
-	if (ioctl (fd, LOOP_CLR_FD, 0) < 0)
-		return;
-  
-	close (fd);
-}
-
-
-static char * where_mounted = NULL;
-
-int
-lomount(char *loopfile, char *where)
-{
-  
-	long int flag;
-
-	flag = MS_MGC_VAL;
-	flag |= MS_RDONLY;
-
-	my_insmod("loop", ANY_DRIVER_TYPE, NULL);
-
-	if (set_loop(loopdev, loopfile)) {
-		log_message("set_loop failed on %s (%s)", loopdev, strerror(errno));
-		return 1;
-	}
-  
-	if (my_mount(loopdev, where, "iso9660", 0)) {
-		del_loop();
-		return 1;
-	}
-
-	where_mounted = strdup(where);
-	log_message("lomount succeeded for %s on %s", loopfile, where);
-	return 0;
-}
-
-
-int
-loumount()
-{
-	if (where_mounted) {
-		umount(where_mounted);
-		where_mounted = NULL;
-	}
-	del_loop();
-	return 0;
-}
-
-
diff --git a/mdk-stage1/lomount.h b/mdk-stage1/lomount.h
deleted file mode 100644
index 3b8a30ac1..000000000
--- a/mdk-stage1/lomount.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef LOMOUNT_H
-#define LOMOUNT_H
-
-int lomount(char *loopfile, char *where);
-int loumount(void);
-
-#endif
diff --git a/mdk-stage1/mar/.cvsignore b/mdk-stage1/mar/.cvsignore
deleted file mode 100644
index bfde37886..000000000
--- a/mdk-stage1/mar/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-mar
diff --git a/mdk-stage1/mar/Makefile b/mdk-stage1/mar/Makefile
deleted file mode 100644
index 801785947..000000000
--- a/mdk-stage1/mar/Makefile
+++ /dev/null
@@ -1,61 +0,0 @@
- #******************************************************************************
- #
- #    mar - The Mandrake Archiver
- #
- # $Id$
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-TARGETS = libmar.a mar
-
-
-ifeq (DIETLIBC, $(L))
-TARGETS += libmar-DIET.a
-endif
-
-
-all: $(TARGETS)
-
-clean:
-	rm -f *.o libmar.a libmar-DIET.a mar
-
-
-mar: mar-frontend.o mar-extract-only-standalone.o
-	gcc -o mar mar-frontend.o mar-extract-only-standalone.o -lbz2
-	$(STRIPCMD) $@
-
-libmar.a: mar-extract-only.o
-	ar -cru $@ $^
-	ranlib $@
-
-libmar-DIET.a: mar-extract-only-DIET.o
-	ar -cru $@ $^
-	ranlib $@
-
-mar-extract-only.o: mar-extract-only.c mar-extract-only.h mar.h
-	gcc $(CFLAGS) $(GLIBC_INCLUDES) -c mar-extract-only.c
-
-mar-extract-only-DIET.o: mar-extract-only.c mar-extract-only.h mar.h
-	gcc $(CFLAGS) $(DIETLIBC_INCLUDES) -o $@ -c mar-extract-only.c
-
-mar-frontend.o: mar-frontend.c mar.h mar-extract-only.h
-	gcc $(CFLAGS) $(GLIBC_INCLUDES) -c mar-frontend.c
-
-mar-extract-only-standalone.o: mar-extract-only.c mar-extract-only.h mar.h
-	gcc $(CFLAGS) $(GLIBC_INCLUDES) -o $@ -D_STANDALONE_ -c mar-extract-only.c
diff --git a/mdk-stage1/mar/mar-extract-only.c b/mdk-stage1/mar/mar-extract-only.c
deleted file mode 100644
index a5b6ccd2f..000000000
--- a/mdk-stage1/mar/mar-extract-only.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * mar - The Mandrake Archiver
- *
- * An archiver that supports compression (through zlib).
- *
- */
-
-/*
- * This code should suffice for stage1 on-the-fly uncompression of kernel modules.
- * (and it DOES perform tests and return values, blaaaah..)
- */
-
-#include "mar-extract-only.h"
-#include "mar.h"
-
-#ifdef _STANDALONE_
-void
-zerr(BZFILE * f) /* decrease code size */
-{
-	fprintf(stderr, BZ2_bzerror(f, &z_errnum));
-}
-
-inline void
-log_perror(char *msg)
-{
-	perror(msg);
-}
-void
-log_message(char *msg)
-{
-	fprintf(stderr, msg);
-}
-#else /* _STANDALONE_ */
-#include "../log.h"
-void
-zerr(BZFILE * f) /* decrease code size */
-{
-	log_message(BZ2_bzerror(f, &z_errnum));
-}
-#endif /* _STANDALONE_ */
-
-
-static int
-mar_open_file(char *filename, struct mar_stream *s)
-{
-	int end_filetable = 0;
-	struct mar_element * previous_element = NULL;
-
-	/* mar_zfile */
-	s->mar_zfile = BZ2_bzopen(filename, "rb");
-	if (!s->mar_zfile)
-	{
-		log_perror(filename);
-		return -1;
-	}
-
-	while (end_filetable == 0)
-	{
-		char buf[512];
-		int ptr = 0;
-		/* read filename */
-		do
-		{
-			if (BZ2_bzread(s->mar_zfile, &(buf[ptr]), sizeof(char)) != sizeof(char))
-			{
-				zerr(s->mar_zfile);
-				return -1;
-			}
-			ptr++;
-		} while ((buf[ptr-1] != 0) && (ptr < 512));
-		/* ptr == 1 when we arrive on the "char 0" of the end of the filetable */
-		if (ptr > 1)
-		{
-			struct mar_element * e = (struct mar_element *) malloc(sizeof(struct mar_element));
-			e->filename = strdup(buf);
-			/* read file_length */
-			if (BZ2_bzread(s->mar_zfile, &(e->file_length), sizeof(int)) != sizeof(int))
-			{
-				zerr(s->mar_zfile);
-				return -1;
-			}
-			/* read data_offset */
-			if (BZ2_bzread(s->mar_zfile, &(e->data_offset), sizeof(int)) != sizeof(int))
-			{
-				zerr(s->mar_zfile);
-				return -1;
-			}
-			/* write down chaining */
-			if (previous_element)
-				previous_element->next_element = e;
-			else
-				s->first_element = e;
-			previous_element = e;
-		}
-		else
-			end_filetable = 1;
-
-	}
-	/* chaining for last element */
-	previous_element->next_element = NULL;
-
-	return 0;
-}
-
-
-char **
-mar_list_contents(char * mar_filename)
-{
-	struct mar_stream s;
-	struct mar_element * elem;
-	char * tmp_contents[500];
-	char ** answ;
-	int i = 0;
-
-	if (mar_open_file(mar_filename, &s))
-		return NULL;
-
-	elem = s.first_element;
-	while (elem)
-	{
-		tmp_contents[i++] = strdup(elem->filename);
-		elem = elem->next_element;
-	}
-	tmp_contents[i++] = NULL;
-	answ = (char **) malloc(sizeof(char *) * i);
-	memcpy(answ, tmp_contents, sizeof(char *) * i);
-	return answ;
-}
-
-
-int
-mar_extract_file(char *mar_filename, char *filename_to_extract, char *dest_dir)
-{
-	struct mar_stream s;
-	struct mar_element * elem;
-
-	if (mar_open_file(mar_filename, &s))
-		return -1;
-
-	elem = s.first_element;
-	while (elem)
-	{
-		if (strcmp(elem->filename, filename_to_extract) == 0)
-		{
-			char garb_buf[4096];
-			char *buf;
-			char *dest_file;
-			int fd;
-			size_t i;
-			dest_file = (char *) alloca(strlen(dest_dir) + strlen(filename_to_extract) + 1);
-			strcpy(dest_file, dest_dir);
-			strcat(dest_file, filename_to_extract);
-			fd = creat(dest_file, 00660);
-			if (fd == -1)
-			{
-				log_perror(dest_file);
-				return -1;
-			}
-			buf = (char *) alloca(elem->file_length);
-			if (!buf)
-			{
-				log_perror(dest_file);
-				return -1;
-			}
-			i = elem->data_offset;
-			while (i > 0) {
-				int to_read = i > sizeof(garb_buf) ? sizeof(garb_buf) : i;
-				if (BZ2_bzread(s.mar_zfile, garb_buf, to_read) != to_read) {
-					log_message("MAR: unexpected EOF in stream");
-					return -1;
-				}
-				i -= to_read;
-			}
-			if (BZ2_bzread(s.mar_zfile, buf, elem->file_length) != elem->file_length)
-			{
-				zerr(s.mar_zfile);
-				return -1;
-			}
-			if (write(fd, buf, elem->file_length) != elem->file_length)
-			{
-				log_perror(dest_file);
-				return -1;
-			}
-			close(fd); /* do not check return value for code size */
-			BZ2_bzclose(s.mar_zfile);
-			return 0;
-		}
-		elem = elem->next_element;
-	}
-	BZ2_bzclose(s.mar_zfile);
-	return 1; /* 1 for file_not_found_in_archive */
-}
-
-
diff --git a/mdk-stage1/mar/mar-extract-only.h b/mdk-stage1/mar/mar-extract-only.h
deleted file mode 100644
index 6fa34efe4..000000000
--- a/mdk-stage1/mar/mar-extract-only.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * mar - The Mandrake Archiver
- *
- * An archiver that supports compression (through zlib).
- *
- */
-
-/*
- * Header for stage1 on-the-fly needs.
- */
-
-#ifndef MAR_EXTRACT_ONLY_H
-#define MAR_EXTRACT_ONLY_H
-
-int mar_extract_file(char *mar_filename, char *filename_to_extract, char *dest_dir);
-char ** mar_list_contents(char *mar_filename);
-
-#endif
diff --git a/mdk-stage1/mar/mar-frontend.c b/mdk-stage1/mar/mar-frontend.c
deleted file mode 100644
index f55ba6fe6..000000000
--- a/mdk-stage1/mar/mar-frontend.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * mar - The Mandrake Archiver
- *
- * An archiver that supports compression (through zlib).
- *
- */
-
-/*
- * This code includes the extracting and creating features.
- *
- */
-
-#include "mar.h"
-#include "mar-extract-only.h"
-
-
-int
-file_size(char *filename)
-{
-	struct stat buf;
-	if (stat(filename, &buf) != 0)
-	{
-		perror(filename);
-		return -1;
-	}
-	return buf.st_size;
-}
-
-
-/* Yes I don't use the datastructure I directly write the final fileformat in memory then write down it.
- * Yes it's bad.
- */
-/* ``files'' is a NULL-terminated array of char* */
-
-char * fnf_tag = "FILE_NOT_FOUND&";
-
-int
-mar_create_file(char *dest_file, char **files)
-{
-	int filenum = 0;
-	int current_offset_filetable = 0;
-	int current_delta_rawdata = 0;
-	int filetable_size;
-	char * temp_marfile_buffer;
-	int total_length = 0;
-
-	filetable_size = sizeof(char); /* ``char 0'' */
-	while (files[filenum])
-	{
-		int fsiz = file_size(files[filenum]);
-		if (fsiz == -1)
-			files[filenum] = fnf_tag;
-		else {
-			filetable_size += 2*sizeof(int) /* file_length, data_offset */ + strlen(files[filenum]) + 1;
-			total_length += fsiz;
-		}
-		filenum++;
-	}
-
-	total_length += filetable_size;
-
-	temp_marfile_buffer = (char *) malloc(total_length); /* create the whole file in-memory (not with alloca! it can be bigger than typical limit for stack of programs (ulimit -s) */
-	DEBUG_MAR(printf("D: mar::create_marfile total-length %d\n", total_length););
-
-	filenum = 0;
-	while (files[filenum])
-	{
-		if (strcmp(files[filenum], fnf_tag)) {
-			FILE * f = fopen(files[filenum], "r");
-			int fsize;
-			if (!f)
-			{
-				perror(files[filenum]);
-				return -1;
-			}
-			
-			/* filename */
-			strcpy(&(temp_marfile_buffer[current_offset_filetable]), files[filenum]);
-			current_offset_filetable += strlen(files[filenum]) + 1;
-			
-			/* file_length */
-			fsize = file_size(files[filenum]);
-			if (fsize == -1) return -1;
-			memcpy(&temp_marfile_buffer[current_offset_filetable], &fsize, sizeof(int));
-			current_offset_filetable += sizeof(int);
-			
-			/* data_offset */
-			memcpy(&temp_marfile_buffer[current_offset_filetable], &current_delta_rawdata, sizeof(int));
-			current_offset_filetable += sizeof(int);
-			
-			/* data_raw_data */
-			if (fread(&temp_marfile_buffer[current_delta_rawdata + filetable_size], 1, fsize, f) != (size_t)fsize)
-			{
-				perror(files[filenum]);
-				return -1;
-			}
-			fclose(f);
-
-			current_delta_rawdata += fsize;
-		}
-
-		filenum++;
-	}
-
-	/* write down ``char 0'' to terminate file table */
-	memset(&temp_marfile_buffer[current_offset_filetable], 0, sizeof(char));
-
-	/* ok, buffer is ready, let's write it on-disk */
-	{
-		BZFILE * f = BZ2_bzopen(dest_file, "w9");
-		if (!f)
-		{
-			perror(dest_file);
-			return -1;
-		}
-		if (BZ2_bzwrite(f, temp_marfile_buffer, total_length) != total_length)
-		{
-			fprintf(stderr, BZ2_bzerror(f, &z_errnum));
-			return -1;
-		}
-		BZ2_bzclose(f);
-	}
-
-	printf("mar: created archive %s (%d files, length %d)\n", dest_file, filenum, total_length);
-	return 0;
-}
-
-
-void
-print_usage(char *progname)
-{
-	printf("Usage: %s [-lxc] [files..]\n", progname);
-	exit(0);
-}
-
-int
-main(int argc, char **argv)
-{
-	if (argc <= 2)
-		print_usage(argv[0]);
-	
-	if (argc >= 3)
-	{
-		if (strcmp(argv[1], "-l") == 0)
-		{
-			char ** contents = mar_list_contents(argv[2]);
-			if (contents)
-				while (contents && *contents) {
-					printf("\t%s\n", *contents);
-					contents++;
-				}
-			exit(0);
-		}
-		if ((strcmp(argv[1], "-x") == 0) && argc == 4)
-		{
-			int res = mar_extract_file(argv[2], argv[3], "./");
-			if (res == 1)
-				fprintf(stderr, "W: file-not-found-in-archive %s\n", argv[3]);
-			if (res == -1)
-				exit(-1);
-			exit(0);
-		}
-		if ((strcmp(argv[1], "-c") == 0) && argc >= 4)
-		{
-			char **files = (char **) alloca(((argc-3)+1) * sizeof(char *));
-			int i = 3;
-			while (i < argc)
-			{
-				files[i-3] = argv[i];
-				i++;
-			}
-			files[argc-3] = NULL;
-			{
-				int results;
-				results = mar_create_file(argv[2], files);
-				if (results != 0)
-					fprintf(stderr, "E: create-marfile-failed\n");
-				exit(results);
-			}
-					
-		}
-	}
-	
-	return 0;
-}
diff --git a/mdk-stage1/mar/mar.h b/mdk-stage1/mar/mar.h
deleted file mode 100644
index 672d7ded8..000000000
--- a/mdk-stage1/mar/mar.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * mar - The Mandrake Archiver
- *
- * An archiver that supports compression (through bzlib).
- *
- * Designed to be small so these bad designs are inside:
- *  . archive and compression are mixed together
- *  . create the mar file in-memory
- *  . does not free memory
- *
- */
-
-#ifndef MAR_H
-#define MAR_H
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <unistd.h>
-
-#include <bzlib.h>
-
-/*
- * Format of a mar file:
- *
- * ASCIIZ filename         \           |
- * int file_length         | repeated  | bzipped
- * int pointer_in_archive  /           |
- * char 0                              |
- * raw_files_data                      /
- *
- */
-
-struct mar_element
-{
-	char * filename;             /* filename (ASCIIZ) of the element */
-	int file_length;             /* length (in bytes) of the raw data of the element */
-	int data_offset;             /* seek start of the raw data in the underlying mar stream */
-	struct mar_element * next_element;  /* pointer to the next element in the mar stream; NULL if last */
-};
-
-struct mar_stream
-{
-	struct mar_element * first_element;  /* pointer to the first element inside the mar stream */
-	BZFILE * mar_zfile;            /* associated zfile (opened) */
-};
-
-int z_errnum;
-
-#define DEBUG_MAR(x)
-
-#endif
diff --git a/mdk-stage1/minilibc.c b/mdk-stage1/minilibc.c
deleted file mode 100644
index 73d7deae5..000000000
--- a/mdk-stage1/minilibc.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-
-#define MINILIBC_INTERNAL
-
-#include "minilibc.h"
-
-int atexit (void (*__func) (void) __attribute__ ((unused)))
-{
-	return 0;
-}
-
-void exit()
-{
-	_do_exit(0);
-	for (;;); /* Shut up gcc */
-}
-
-
-char ** _environ = NULL;
-int errno = 0;
-
-void _init (int __status __attribute__ ((unused)))
-{
-}
-
-void __libc_init_first (int __status __attribute__ ((unused)))
-{
-}
-
-int __libc_start_main (int (*main) (int, char **, char **), int argc,
-		       char **argv, void (*init) (void) __attribute__ ((unused)), void (*fini) (void) __attribute__ ((unused)),
-		       void (*rtld_fini) (void) __attribute__ ((unused)), void *stack_end __attribute__ ((unused)))
-{
-	exit ((*main) (argc, argv, NULL));
-	/* never get here */
-	return 0;
-}
-
-void _fini (int __status __attribute__ ((unused)))
-{
-}
-
-inline int socket(int a, int b, int c)
-{
-	unsigned long args[] = { a, b, c };
-	
-	return socketcall(SYS_SOCKET, args);
-}
-
-inline int bind(int a, void * b, int c)
-{
-	unsigned long args[] = { a, (long) b, c };
-	
-	return socketcall(SYS_BIND, args);
-}
-
-inline int listen(int a, int b)
-{
-	unsigned long args[] = { a, b, 0 };
-	
-	return socketcall(SYS_LISTEN, args);
-}
-
-inline int accept(int a, void * addr, void * addr2)
-{
-	unsigned long args[] = { a, (long) addr, (long) addr2 };
-	
-	return socketcall(SYS_ACCEPT, args);
-}
-
-
-void sleep(int secs)
-{
-	struct timeval tv;
-	
-	tv.tv_sec = secs;
-	tv.tv_usec = 0;
-	
-	select(0, NULL, NULL, NULL, &tv);
-}
-
-
-int strlen(const char * string)
-{
-	int i = 0;
-	
-	while (*string++) i++;
-	
-	return i;
-}
-
-char * strncpy(char * dst, const char * src, int len)
-{
-	char * chptr = dst;
-	int i = 0;
-	
-	while (*src && i < len) *dst++ = *src++, i++;
-	if (i < len) *dst = '\0';
-	
-	return chptr;
-}
-
-char * strcpy(char * dst, const char * src)
-{
-	char * chptr = dst;
-	
-	while (*src) *dst++ = *src++;
-	*dst = '\0';
-	
-	return chptr;
-}
-
-void * memcpy(void * dst, const void * src, size_t count)
-{
-	char * a = dst;
-	const char * b = src;
-	
-	while (count--)
-		*a++ = *b++;
-	
-	return dst;
-}
-
-
-int strcmp(const char * a, const char * b)
-{
-	int i, j;  
-	
-	i = strlen(a); j = strlen(b);
-	if (i < j)
-		return -1;
-	else if (j < i)
-	return 1;
-
-	while (*a && (*a == *b)) a++, b++;
-	
-	if (!*a) return 0;
-	
-	if (*a < *b)
-		return -1;
-	else
-		return 1;
-}
-
-int strncmp(const char * a, const char * b, int len)
-{
-	char buf1[1000], buf2[1000];
-	
-	strncpy(buf1, a, len);
-	strncpy(buf2, b, len);
-	buf1[len] = '\0';
-	buf2[len] = '\0';
-	
-	return strcmp(buf1, buf2);
-}
-
-char * strchr(char * str, int ch)
-{
-	char * chptr;
-	
-	chptr = str;
-	while (*chptr)
-	{
-		if (*chptr == ch) return chptr;
-		chptr++;
-	}
-
-	return NULL;
-}
-
-
-char * strstr(char *haystack, char *needle)
-{
-	char * tmp = haystack;
-	while ((tmp = strchr(tmp, needle[0])) != NULL) {
-		int i = 1;
-		while (i < strlen(tmp) && i < strlen(needle) && tmp[i] == needle[i])
-			i++;
-		if (needle[i] == '\0')
-			return tmp;
-		tmp++;
-	}
-	return NULL;
-}
-
-
-/* Minimum printf which handles only characters, %d's and %s's */
-void printf(char * fmt, ...)
-{
-	char buf[2048];
-	char * start = buf;
-	char * chptr = buf;
-	va_list args;
-	char * strarg;
-	int numarg;
-
-	strncpy(buf, fmt, sizeof(buf));
-	va_start(args, fmt);
-
-	while (start)
-	{
-		while (*chptr != '%' && *chptr) chptr++;
-		
-		if (*chptr == '%')
-		{
-			*chptr++ = '\0';
-			print_str_init(1, start);
-			
-			switch (*chptr++)
-			{
-			case 's': 
-				strarg = va_arg(args, char *);
-				print_str_init(1, strarg);
-				break;
-				
-			case 'd':
-				numarg = va_arg(args, int);
-				print_int_init(1, numarg);
-				break;
-			}
-			
-			start = chptr;
-		}
-		else
-		{
-			print_str_init(1, start);
-			start = NULL;
-		}
-	}
-}
-
diff --git a/mdk-stage1/minilibc.h b/mdk-stage1/minilibc.h
deleted file mode 100644
index e0775e3a0..000000000
--- a/mdk-stage1/minilibc.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-
-#include <stdarg.h>
-
-#define _LOOSE_KERNEL_NAMES 1
-
-#define NULL ((void *) 0)
-
-#define	WIFSTOPPED(status)	(((status) & 0xff) == 0x7f)
-#define	WIFSIGNALED(status)	(!WIFSTOPPED(status) && !WIFEXITED(status))
-#define	WEXITSTATUS(status)	(((status) & 0xff00) >> 8)
-#define	WTERMSIG(status)	((status) & 0x7f)
-#define	WSTOPSIG(status)	WEXITSTATUS(status)
-#define	WIFEXITED(status)	(WTERMSIG(status) == 0)
-
-#define MS_MGC_VAL 0xc0ed0000
-
-#define isspace(a) (a == ' ' || a == '\t')
-
-extern char ** _environ;
-
-extern int errno;
-
-/* Aieee, gcc 2.95+ creates a stub for posix_types.h on i386 which brings
-   glibc headers in and thus makes __FD_SET etc. not defined with 2.3+ kernels. */
-#define _FEATURES_H 1
-#include <linux/socket.h>
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/if.h>
-#include <linux/un.h>
-#include <linux/loop.h>
-#include <linux/net.h>
-#include <asm/posix_types.h>
-#include <asm/termios.h>
-#include <asm/ioctls.h>
-#include <asm/unistd.h>
-#include <asm/fcntl.h>
-#include <asm/signal.h>
-
-
-#ifndef MINILIBC_INTERNAL
-static inline _syscall5(int,mount,const char *,spec,const char *,dir,const char *,type,unsigned long,rwflag,const void *,data);
-static inline _syscall5(int,_newselect,int,n,fd_set *,rd,fd_set *,wr,fd_set *,ex,struct timeval *,timeval);
-static inline _syscall4(int,wait4,pid_t,pid,int *,status,int,opts,void *,rusage)
-static inline _syscall3(int,write,int,fd,const char *,buf,unsigned long,count)
-static inline _syscall3(int,reboot,int,magic,int,magic_too,int,flag)
-static inline _syscall3(int,execve,const char *,fn,void *,argv,void *,envp)
-static inline _syscall3(int,read,int,fd,const char *,buf,unsigned long,count)
-static inline _syscall3(int,open,const char *,fn,int,flags,mode_t,mode)
-static inline _syscall3(int,ioctl,int,fd,int,request,void *,argp)
-static inline _syscall2(int,dup2,int,one,int,two)
-static inline _syscall2(int,kill,pid_t,pid,int,sig)
-static inline _syscall2(int,symlink,const char *,a,const char *,b)
-static inline _syscall2(int,chmod,const char * ,path,mode_t,mode)
-static inline _syscall2(int,sethostname,const char *,name,int,len)
-static inline _syscall2(int,setdomainname,const char *,name,int,len)
-static inline _syscall2(int,setpgid,int,name,int,len)
-static inline _syscall2(int,signal,int,num,void *,len)
-static inline _syscall1(int,umount,const char *,dir)
-static inline _syscall1(int,unlink,const char *,fn)
-static inline _syscall1(int,close,int,fd)
-static inline _syscall1(int,swapoff,const char *,fn)
-static inline _syscall0(int,getpid)
-static inline _syscall0(int,sync)
-#ifdef __sparc__
-/* Nonstandard fork calling convention :( */
-static inline int fork(void) {
-  int __res;
-  __asm__ __volatile__ (
-    "mov %0, %%g1\n\t"
-    "t 0x10\n\t"
-    "bcc 1f\n\t"
-    "dec %%o1\n\t"
-    "sethi %%hi(%2), %%g1\n\t"
-    "st %%o0, [%%g1 + %%lo(%2)]\n\t"
-    "b 2f\n\t"
-    "mov -1, %0\n\t"
-    "1:\n\t"
-    "and %%o0, %%o1, %0\n\t"
-    "2:\n\t"
-    : "=r" (__res)
-    : "0" (__NR_fork), "i" (&errno)
-    : "g1", "o0", "cc");
-  return __res;
-}
-#else
-static inline _syscall0(int,fork)
-#endif
-static inline _syscall0(pid_t,setsid)
-static inline _syscall3(int,syslog,int, type, char *, buf, int, len);
-#else
-static inline _syscall5(int,_newselect,int,n,fd_set *,rd,fd_set *,wr,fd_set *,ex,struct timeval *,timeval);
-static inline _syscall3(int,write,int,fd,const char *,buf,unsigned long,count)
-static inline _syscall2(int,socketcall,int,code,unsigned long *, args)
-#define __NR__do_exit __NR_exit
-extern inline _syscall1(int,_do_exit,int,exitcode)
-#endif
-
-#define select _newselect
-
-extern int errno;
-
-inline int socket(int a, int b, int c);
-inline int bind(int a, void * b, int c);
-inline int listen(int a, int b);
-inline int accept(int a, void * addr, void * addr2);
-
-void sleep(int secs);
-
-int strlen(const char * string);
-char * strcpy(char * dst, const char * src);
-void * memcpy(void * dst, const void * src, size_t count);
-int strcmp(const char * a, const char * b);
-int strncmp(const char * a, const char * b, int len);
-char * strchr(char * str, int ch);
-char * strstr(char *haystack, char *needle);
-char * strncpy(char * dst, const char * src, int len);
-
-void print_str_init(int fd, char * string);
-void print_int_init(int fd, int i);
-/* Minimum printf which handles only characters, %d's and %s's */
-void printf(char * fmt, ...) __attribute__ ((format (printf, 1, 2)));
-
diff --git a/mdk-stage1/mkinitrd_helper/Makefile b/mdk-stage1/mkinitrd_helper/Makefile
deleted file mode 100644
index 1fa6a345a..000000000
--- a/mdk-stage1/mkinitrd_helper/Makefile
+++ /dev/null
@@ -1,46 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-VERSION = 1.1.1
-
-DEFS = -DVERSION=\"$(VERSION)\"
-
-
-MKINITRD_HELPER_SRC = mkinitrd_helper.c
-MKINITRD_HELPER_LIBS = ../insmod-busybox/libinsmod-DIET.a
-
-MKINITRD_HELPER_OBJS = $(subst .c,.o,$(MKINITRD_HELPER_SRC))
-
-BIN = mkinitrd_helper 
-
-all: $(BIN)
-
-clean:
-	rm -f *.o $(BIN)
-
-FLAGS = -Wall -Werror -Os -fomit-frame-pointer -c
-
-
-$(MKINITRD_HELPER_OBJS): %.o: %.c
-	$(CC) $(DEFS) $(DIETLIBC_INCLUDES) -I.. -c $< -o $@
-
-mkinitrd_helper: $(MKINITRD_HELPER_OBJS) $(MKINITRD_HELPER_LIBS) $(DIETLIBC_LIBC)
-	$(CC) $(DIETLIBC_LDFLAGS_STAGE1) -o $@ $^
-	$(STRIPCMD) $@
diff --git a/mdk-stage1/mkinitrd_helper/mkinitrd_helper.c b/mdk-stage1/mkinitrd_helper/mkinitrd_helper.c
deleted file mode 100644
index 67be7c340..000000000
--- a/mdk-stage1/mkinitrd_helper/mkinitrd_helper.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2001 MandrakeSoft
- *
- * This software is covered by the GPL license.
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * This little program replaces usual sash and insmod.static based script
- * from mkinitrd (that insmod modules, plus possibly mount a partition and
- * losetup a loopback-based / on the partition).
- *
- *
- * On my machine:
- *   gzipped sash + insmod.static         502491 bytes
- *   gzipped <this-program>                14243 bytes
- *
- * There will be room for linux-2.4 and many modules, now. Cool.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <sys/mount.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/ioctl.h>
-#include <signal.h>
-
-#include "insmod.h"
-
-int quiet = 0;
-
-void vlog_message(const char * s, va_list args)
-{
-	vprintf(s, args);
-	printf("\n");
-}
-
-void log_perror(char *msg)
-{
-	perror(msg);
-}
-
-
-static void fatal_error(char *msg)
-{
-	printf("[] E: %s\n[] giving hand to kernel.\n", msg);
-        exit(-1);
-}
-
-static void warning(char *msg)
-{
-	printf("[] W: %s\n", msg);
-}
-
-static void parse_parms(const char * parm, char ** parm1, char ** parm2, char ** parm3)
-{
-	char * ptr;
-	
-	ptr = strchr(parm, '\n');
-	if (!ptr)
-		fatal_error("bad config file: no newline after parms");
-
-	*parm1 = malloc(ptr-parm+1); /* yup, never freed :-) */
-	memcpy(*parm1, parm, ptr-parm);
-	(*parm1)[ptr-parm] = '\0';
-
-	if (!parm2)
-		return;
-
-	*parm2 = strchr(*parm1, ' ');
-	if (!*parm2)
-		return;
-	**parm2 = '\0';
-	(*parm2)++;
-
-	if (!parm3)
-		return;
-
-	*parm3 = strchr(*parm2, ' ');
-	if (!*parm3)
-		return;
-	**parm3 = '\0';
-	(*parm3)++;
-}
-
-
-static void insmod_(const char * parm)
-{
-	char * mod_name, * options;
-
-	parse_parms(parm, &mod_name, &options, NULL);
-
-#ifdef DEBUG
-	printf("insmod %s options %s\n", mod_name, options);
-#endif
-	if (!quiet)
-		printf("[] Loading module %s\n", mod_name);
-
-	if (insmod_call(mod_name, options))
-		perror("insmod failed");
-}
-
-
-static void mount_(const char * parm)
-{
-	char * dev, * location, * fs;
-	unsigned long flags;
-	char * opts = NULL;
-
-	parse_parms(parm, &dev, &location, &fs);
-
-#ifdef DEBUG
-	printf("mounting %s on %s as type %s\n", dev, location, fs);
-#endif
-	if (!quiet)
-		printf("[] Mounting device containing loopback root filesystem\n");
-
-	flags = MS_MGC_VAL;
-
-	if (!strcmp(fs, "vfat"))
-		opts = "check=relaxed";
-
-	if (mount(dev, location, fs, flags, opts))
-		perror("mount failed");
-}
-
-
-#define LO_NAME_SIZE	64
-#define LO_KEY_SIZE	32
-
-struct loop_info
-{
-	int		lo_number;	/* ioctl r/o */
-	dev_t		lo_device; 	/* ioctl r/o */
-	unsigned long	lo_inode; 	/* ioctl r/o */
-	dev_t		lo_rdevice; 	/* ioctl r/o */
-	int		lo_offset;
-	int		lo_encrypt_type;
-	int		lo_encrypt_key_size; 	/* ioctl w/o */
-	int		lo_flags;	/* ioctl r/o */
-	char		lo_name[LO_NAME_SIZE];
-	unsigned char	lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
-	unsigned long	lo_init[2];
-	char		reserved[4];
-};
-
-#define LOOP_SET_FD	0x4C00
-#define LOOP_CLR_FD	0x4C01
-#define LOOP_SET_STATUS	0x4C02
-
-static void set_loop_(const char * parm)
-{
-	struct loop_info loopinfo;
-	int fd, ffd;
-	char * device, * file;
-
-	parse_parms(parm, &device, &file, NULL);
-
-#ifdef DEBUG
-	printf("set_looping %s with %s\n", device, file);
-#endif
-	if (!quiet)
-		printf("[] Setting up loopback file %s\n", file);
-
-	if ((ffd = open(file, O_RDWR)) < 0) {
-		perror("set_loop, opening file in rw");
-		exit(-1);
-	}
-  
-	if ((fd = open(device, O_RDWR)) < 0) {
-		perror("set_loop, opening loop device in rw");
-		close(ffd);
-		exit(-1);
-	}
-
-	memset(&loopinfo, 0, sizeof (loopinfo));
-	strncpy(loopinfo.lo_name, file, LO_NAME_SIZE);
-	loopinfo.lo_name[LO_NAME_SIZE - 1] = 0;
-	loopinfo.lo_offset = 0;
-
-	if (ioctl(fd, LOOP_SET_FD, ffd) < 0) {
-		close(fd);
-		close(ffd);
-		perror("LOOP_SET_FD");
-		exit(-1);
-	}
-
-	if (ioctl(fd, LOOP_SET_STATUS, &loopinfo) < 0) {
-		(void) ioctl (fd, LOOP_CLR_FD, 0);
-		close(fd);
-		close(ffd);
-		perror("LOOP_SET_STATUS");
-		exit(-1);
-	}
-
-	close(fd);
-	close(ffd);
-}
-
-
-#define MD_MAJOR 9
-#define RAID_AUTORUN           _IO (MD_MAJOR, 0x14)
-#include <linux/raid/md_u.h>
-
-static void raidautorun_(const char * parm)
-{
-	char * device;
-	int fd;
-
-	parse_parms(parm, &device, NULL, NULL);
-
-	if (!quiet)
-		printf("[] Calling raid autorun for %s\n", device);
-	
-	fd = open(device, O_RDWR, 0);
-	if (fd < 0) {
-		printf("raidautorun: failed to open %s: %d\n", device, errno);
-		return;
-	}
-	
-	if (ioctl(fd, RAID_AUTORUN, 0)) {
-		printf("raidautorun: RAID_AUTORUN failed: %d\n", errno);
-	}
-	
-	close(fd);
-}
-
-static int handle_command(char ** ptr, char * cmd_name, void (*cmd_func)(const char * parm))
-{
-	if (!strncmp(*ptr, cmd_name, strlen(cmd_name))) {
-		*ptr = strchr(*ptr, '\n');
-		if (!*ptr)
-			fatal_error("Bad config file: no newline after command");
-		(*ptr)++;
-		cmd_func(*ptr);
-		*ptr = strchr(*ptr, '\n');
-		if (!*ptr)
-			exit(0);
-		(*ptr)++;
-		return 1;
-	}
-	return 0;
-}
-
-
-int main(int argc, char **argv)
-{
-	int fd_conf, i;
-	char buf[5000];
-	char * ptr;
-
-	if (strstr(argv[0], "modprobe"))
-		exit(0);
-
-	if (mount("/proc", "/loopfs", "proc", 0, NULL))
-		printf("[] couldn't mount proc filesystem\n");
-	else {
-		int fd_cmdline = open("/loopfs/cmdline", O_RDONLY);
-		if (fd_cmdline > 0) {
-			i = read(fd_cmdline, buf, sizeof(buf));
-			if (i == -1)
-				warning("could not read cmdline");
-			else {
-				buf[i] = '\0';
-				if (strstr(buf, "quiet"))
-					quiet = 1;
-			}
-			close(fd_cmdline);
-		}
-		umount("/loopfs");
-	}
-
-	if (!quiet)
-		printf("[] initrd_helper v" VERSION "\n");
-
-	if ((fd_conf = open("/mkinitrd_helper.conf", O_RDONLY)) < 0)
-		fatal_error("could not open mkinitrd_helper config file");
-	
-	i = read(fd_conf, buf, sizeof(buf));
-	if (i == -1)
-		fatal_error("could not read mkinitrd_helper config file");
-	buf[i] = '\0';
-	close(fd_conf);
-
-	ptr = buf;
-
-	while (*ptr)
-		if (!(handle_command(&ptr, "insmod", insmod_) +
-		      handle_command(&ptr, "mount", mount_) +
-		      handle_command(&ptr, "raidautorun", raidautorun_) +
-		      handle_command(&ptr, "set_loop", set_loop_)))
-			warning("unkown command (trying to continue)");
-
-	return 0;
-}
diff --git a/mdk-stage1/modules.c b/mdk-stage1/modules.c
deleted file mode 100644
index 1fe1cd42a..000000000
--- a/mdk-stage1/modules.c
+++ /dev/null
@@ -1,437 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * (1) calculate dependencies
- * (2) unarchive relevant modules
- * (3) insmod them
- */
-
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/mount.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include "insmod.h"
-#include "stage1.h"
-#include "log.h"
-#include "mar/mar-extract-only.h"
-#include "frontend.h"
-#include "mount.h"
-#include "modules_descr.h"
-
-#include "modules.h"
-
-static struct module_deps_elem * modules_deps = NULL;
-
-static char * archive_name = "/modules/modules.mar";
-int disable_modules = 0;
-
-
-/* unarchive and insmod given module
- * WARNING: module must not contain the trailing ".o"
- */
-static enum insmod_return insmod_archived_file(const char * mod_name, char * options)
-{
-	char module_name[50];
-	char final_name[50] = "/tmp/";
-	int i, rc;
-
-	strncpy(module_name, mod_name, sizeof(module_name));
-	strcat(module_name, ".o");
-	i = mar_extract_file(archive_name, module_name, "/tmp/");
-	if (i == 1) {
-		log_message("file-not-found-in-archive %s (maybe you can try another boot floppy such as 'other.img' for seldom used SCSI modules)", module_name);
-		return INSMOD_FAILED_FILE_NOT_FOUND;
-	}
-	if (i != 0)
-		return INSMOD_FAILED;
-
-	strcat(final_name, mod_name);
-	strcat(final_name, ".o");
-
-	rc = insmod_call(final_name, options);
-	unlink(final_name); /* sucking no space left on device */
-	if (rc) {
-		log_message("\tfailed");
-		return INSMOD_FAILED;
-	}
-	return INSMOD_OK;
-}
-
-
-
-static int load_modules_dependencies(void)
-{
-	char * deps_file = "/modules/modules.dep";
-	char * buf, * ptr, * start, * end;
-	struct stat s;
-	int fd, line, i;
-
-	log_message("loading modules dependencies");
-
-	if (IS_TESTING)
-		return 0;
-
-	fd = open(deps_file, O_RDONLY);
-	if (fd == -1) {
-		log_perror(deps_file);
-		return -1;
-	}
-	
-	fstat(fd, &s);
-	buf = alloca(s.st_size + 1);
-	if (read(fd, buf, s.st_size) != (ssize_t)s.st_size) {
-		log_perror(deps_file);
-		return -1;
-	}
-	buf[s.st_size] = '\0';
-	close(fd);
-
-	ptr = buf;
-	line = 0;
-	while (ptr) {
-		line++;
-		ptr = strchr(ptr + 1, '\n');
-	}
-
-	modules_deps = malloc(sizeof(*modules_deps) * (line+1));
-
-	start = buf;
-	line = 0;
-	while (start < (buf+s.st_size) && *start) {
-		char * tmp_deps[50];
-
-		end = strchr(start, '\n');
-		*end = '\0';
-
-		ptr = strchr(start, ':');
-		if (!ptr) {
-			start = end + 1;
-			continue;
-		}
-		*ptr = '\0';
-		ptr++;
-
-		while (*ptr && (*ptr == ' ')) ptr++;
-		if (!*ptr) {
-			start = end + 1;
-			continue;
-		}
-
-		/* sort of a good line */
-		modules_deps[line].name = strdup(start);
-
-		start = ptr;
-		i = 0;
-		while (start && *start) {
-			ptr = strchr(start, ' ');
-			if (ptr) *ptr = '\0';
-			tmp_deps[i++] = strdup(start);
-			if (ptr)
-				start = ptr + 1;
-			else
-				start = NULL;
-			while (start && *start && *start == ' ')
-				start++;
-		}
-		tmp_deps[i++] = NULL;
-
-		modules_deps[line].deps = memdup(tmp_deps, sizeof(char *) * i);
-
-		line++;
-		start = end + 1;
-	}
-	modules_deps[line].name = NULL;
-
-	return 0;
-}
-
-
-void init_modules_insmoding(void)
-{
-	if (load_modules_dependencies()) {
-		log_message("warning, error initing modules stuff, modules loading disabled");
-		disable_modules = 1;
-	}
-}
-
-
-static void add_modules_conf(char * str)
-{
-	static char data[5000] = "";
-	char * target = "/etc/modules.conf";
-	int fd;
-
-	if (strlen(data) + strlen(str) >= sizeof(data))
-		return;
-
-	strcat(data, str);
-	strcat(data, "\n");
-
-	fd = open(target, O_CREAT|O_WRONLY|O_TRUNC, 00660);
-	
-	if (fd == -1) {
-		log_perror(str);
-		return;
-	}
-
-	if (write(fd, data, strlen(data) + 1) != (ssize_t) (strlen(data) + 1))
-		log_perror(str);
-
-	close(fd);
-}
-
-
-static int module_already_present(const char * name)
-{
-	FILE * f;
-	int answ = 0;
-	f = fopen("/proc/modules", "rb");
-	while (1) {
-		char buf[500];
-		if (!fgets(buf, sizeof(buf), f)) break;
-		if (!strncmp(name, buf, strlen(name)) && buf[strlen(name)] == ' ')
-			answ = 1;
-	}
-	fclose(f);
-	return answ;
-}
-
-
-static enum insmod_return insmod_with_deps(const char * mod_name, char * options)
-{
-	struct module_deps_elem * dep;
-
-	dep = modules_deps;
-	while (dep && dep->name && strcmp(dep->name, mod_name)) dep++;
-
-	if (dep && dep->name && dep->deps) {
-		char ** one_dep;
-		one_dep = dep->deps;
-		while (*one_dep) {
-			/* here, we can fail but we don't care, if the error is
-			 * important, the desired module will fail also */
-			insmod_with_deps(*one_dep, NULL);
-			one_dep++;
-		}
-	}
-
-	if (module_already_present(mod_name))
-		return INSMOD_OK;
-
-	log_message("needs %s", mod_name);
-	return insmod_archived_file(mod_name, options);
-}
-
-
-#ifndef DISABLE_NETWORK
-enum insmod_return my_insmod(const char * mod_name, enum driver_type type, char * options)
-#else
-enum insmod_return my_insmod(const char * mod_name, enum driver_type type __attribute__ ((unused)), char * options)
-#endif
-{
-	int i;
-#ifndef DISABLE_NETWORK
-	char ** net_devices = NULL; /* fucking compiler */
-#endif
-
-	log_message("have to insmod %s", mod_name);
-
-	if (disable_modules) {
-		log_message("\tdisabled");
-		return INSMOD_OK;
-	}
-
-#ifndef DISABLE_NETWORK
-	if (type == NETWORK_DEVICES)
-		net_devices = get_net_devices();
-#endif
-
-	if (IS_TESTING)
-		return INSMOD_OK;
-
-	i = insmod_with_deps(mod_name, options);
-	if (i == 0) {
-		log_message("\tsucceeded %s", mod_name);
-#ifndef DISABLE_NETWORK
-		if (type == NETWORK_DEVICES) {
-			char ** new_net_devices = get_net_devices();
-			while (new_net_devices && *new_net_devices) {
-				char alias[500];
-				char ** ptr = net_devices;
-				while (ptr && *ptr) {
-					if (!strcmp(*new_net_devices, *ptr))
-						goto already_present;
-					ptr++;
-				}
-				sprintf(alias, "alias %s %s", *new_net_devices, mod_name);
-				add_modules_conf(alias);
-				log_message("NET: %s", alias);
-				net_discovered_interface(*new_net_devices);
-				
-			already_present:
-				new_net_devices++;
-			}
-		}
-#endif
-	} else
-		log_message("warning, insmod failed (%s %s) (%d)", mod_name, options, i);
-	
-	return i;
-
-}
-
-static enum return_type insmod_with_options(char * mod, enum driver_type type)
-{
-	char * questions[] = { "Options", NULL };
-	static char ** answers = NULL;
-	enum return_type results;
-	char options[500] = "options ";
-
-	results = ask_from_entries("Please enter the parameters to give to the kernel:", questions, &answers, 24, NULL);
-	if (results != RETURN_OK)
-		return results;
-
-	strcat(options, mod);
-	strcat(options, " ");
-	strcat(options, answers[0]); // because my_insmod will eventually modify the string
-	
-	if (my_insmod(mod, type, answers[0]) != INSMOD_OK) {
-		stg1_error_message("Insmod failed.");
-		return RETURN_ERROR;
-	}
-	
-	add_modules_conf(options);
-
-	return RETURN_OK;
-}
-
-enum return_type ask_insmod(enum driver_type type)
-{
-	char * mytype;
-	char msg[200];
-	enum return_type results;
-	char * choice;
-
-	unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
-
-	if (type == SCSI_ADAPTERS)
-		mytype = "SCSI";
-	else if (type == NETWORK_DEVICES)
-		mytype = "NET";
-	else
-		return RETURN_ERROR;
-
-	if (disable_modules)
-		return RETURN_BACK;
-
-	snprintf(msg, sizeof(msg), "Which driver should I try to gain %s access?", mytype);
-
-	{
-		char ** drivers = mar_list_contents(archive_name);
-		char ** descrs = malloc(sizeof(char *) * string_array_length(drivers));
-		char ** p_drivers = drivers;
-		char ** p_descrs = descrs;
-		while (p_drivers && *p_drivers) {
-			int i;
-			*p_descrs = NULL;
-			for (i = 0 ; i < modules_descriptions_num ; i++) {
-				if (!strncmp(*p_drivers, modules_descriptions[i].module, strlen(modules_descriptions[i].module))
-				    && (*p_drivers)[strlen(modules_descriptions[i].module)] == '.') /* one contains '.o' not the other */
-					*p_descrs = modules_descriptions[i].descr;
-			}
-			p_drivers++;
-			p_descrs++;
-		}
-		results = ask_from_list_comments(msg, drivers, descrs, &choice);
-	}
-
-	if (results == RETURN_OK) {
-		choice[strlen(choice)-2] = '\0'; /* remove trailing .o */
-		return insmod_with_options(choice, type);
-	} else
-		return results;
-}
-
-
-void update_modules(void)
-{
-	FILE * f;
-	char ** disk_contents;
-	char final_name[500];
-	char floppy_mount_location[] = "/tmp/floppy";
-
-	stg1_info_message("Please insert the Update Modules floppy.");;
-
-	my_insmod("floppy", ANY_DRIVER_TYPE, NULL);
-
-	if (my_mount("/dev/fd0", floppy_mount_location, "ext2", 0) == -1) {
-		enum return_type results = ask_yes_no("I can't find a Linux ext2 floppy in first floppy drive.\n"
-						      "Retry?");
-		if (results == RETURN_OK)
-			return update_modules();
-		return;
-	}
-
-	disk_contents = list_directory(floppy_mount_location);
-
-	if (!(f = fopen("/tmp/floppy/to_load", "rb"))) {
-		stg1_error_message("I can't find \"to_load\" file.");
-		umount(floppy_mount_location);
-		return update_modules();
-	}
-	while (1) {
-		char module[500];
-		char * options;
-		char ** entry = disk_contents;
-
-		if (!fgets(module, sizeof(module), f)) break;
-		if (module[0] == '#' || strlen(module) == 0)
-			continue;
-
-		while (module[strlen(module)-1] == '\n')
-			module[strlen(module)-1] = '\0';
-		options = strchr(module, ' ');
-		if (options) {
-			options[0] = '\0';
-			options++;
-		}
-
-		log_message("updatemodules: (%s) (%s)", module, options);
-		while (entry && *entry) {
-			if (!strncmp(*entry, module, strlen(module)) && (*entry)[strlen(module)] == '.') {
-				sprintf(final_name, "%s/%s", floppy_mount_location, *entry);
-				if (insmod_call(final_name, options)) {
-					log_message("\t%s (floppy): failed", *entry);
-					stg1_error_message("Insmod %s (floppy) failed.", *entry);
-				}
-				break;
-			}
-			entry++;
-		}
-		if (!entry || !*entry) {
-			enum insmod_return ret = my_insmod(module, ANY_DRIVER_TYPE, options);
-			if (ret != INSMOD_OK) {
-				log_message("\t%s (marfile): failed", module);
-				stg1_error_message("Insmod %s (marfile) failed.", module);
-			}
-		}
-	}
-	fclose(f);
-	umount(floppy_mount_location);
-}
diff --git a/mdk-stage1/modules.h b/mdk-stage1/modules.h
deleted file mode 100644
index a5fccb609..000000000
--- a/mdk-stage1/modules.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _MODULES_H_
-#define _MODULES_H_
-
-#include "stage1.h"
-#include "probing.h"
-
-enum insmod_return { INSMOD_OK, INSMOD_FAILED, INSMOD_FAILED_FILE_NOT_FOUND };
-
-void init_modules_insmoding(void);
-enum insmod_return my_insmod(const char * mod_name, enum driver_type type, char * options);
-enum return_type ask_insmod(enum driver_type);
-void update_modules(void);
-
-struct module_deps_elem {
-    char * name;
-    char ** deps;
-};
-
-extern int disable_modules;
-
-#endif
diff --git a/mdk-stage1/modules_descr.h b/mdk-stage1/modules_descr.h
deleted file mode 100644
index d38f437d8..000000000
--- a/mdk-stage1/modules_descr.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2001 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _MODULES_DESCR_H_
-#define _MODULES_DESCR_H_
-
-struct module_descr {
-	const char * module;
-	char * descr;
-};
-
-struct module_descr modules_descriptions[] = {
-#ifndef DISABLE_NETWORK
-	/* description of network drivers that have not very explicit names */
-	{ "ne",        "NE1000/NE2000/clones" },
-	{ "ne2k-pci",  "PCI NE2000" },
-	{ "depca",     "DEC DEPCA/DE100/DE101/DE200/DE201/DE202/DE210/DE422" },
-	{ "dgrs",      "Digi RightSwitch SE-X" },
-	{ "ewrk3",     "DEC DE203/DE204/DE205" },
-	{ "lance",     "Allied Telesis AT1500, HP J2405A, NE2100/NE2500" },
-	{ "sis900",    "SiS 900/7016/630E, Am79c901, RTL8201" },
-	{ "via-rhine", "VIA VT86c100A Rhine-II, 3043 Rhine-I" },
-	{ "tulip",     "DEC 21040-family based cards" },
-	{ "wd",        "WD8003/WD8013" },
-	{ "bmac",      "Macintosh integrated ethernet (G3)" },
-	{ "gmac",      "Macintosh integrated ethernet (G4/iBook)" },
-	{ "mace",      "Macintosh integrated ethernet (PowerMac)" },
-#endif
-
-#ifndef DISABLE_MEDIAS
-	/* description of scsi drivers that have not very explicit names */
-	{ "53c7,8xx",  "NCR53c810/700" },
-	{ "sim710",    "NCR53c710" },
-	{ "aic7xxx",   "Adaptec 7xxx family (AIC/AHA/etc)" },
-	{ "atp870u",   "ACARD/ARTOP AEC-6710/6712" },
-	{ "ncr53c8xx", "Symbios 53c family" },
-	{ "sym53c8xx", "Symbios 53c family" },
-	{ "sim710",    "NCR53C710 family" },
-	{ "mesh",      "Macintosh integrated SCSI (NewWorld or internal SCSI)" },
-	{ "mac53c94",  "Macintosh integrated SCSI (OldWorld or external SCSI)" },
-#endif
-
-#ifdef ENABLE_USB
-	/* description of usb drivers that have not very explicit names */
-	{ "usbnet",    "Netchip or Prolific USB-USB Bridge" },
-	{ "pegasus",   "ADMtek AN986 (USB Ethernet chipset)" },
-	{ "kaweth",    "KL5KUSB101 (USB Ethernet chipset)" },
-	{ "catc",      "CATC EL1210A NetMate USB Ethernet" },
-#endif
-};
-
-int modules_descriptions_num = sizeof(modules_descriptions) / sizeof(struct module_descr);
-
-
-#endif
diff --git a/mdk-stage1/mount.c b/mdk-stage1/mount.c
deleted file mode 100644
index 917100479..000000000
--- a/mdk-stage1/mount.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <sys/mount.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include "log.h"
-#include "modules.h"
-
-#include "mount.h"
-
-
-
-#ifndef DISABLE_MEDIAS
-/* WARNING: this won't work if the argument is not /dev/ based */
-int ensure_dev_exists(char *dev)
-{
-	int major, minor;
-	int type = S_IFBLK; /* my default type is block. don't forget to change for chars */
-	char * name;
-	struct stat buf;
-	char * ptr;
-	
-	name = &dev[5]; /* we really need that dev be passed as /dev/something.. */
-
-	if (!stat(dev, &buf))
-		return 0; /* if the file already exists, we assume it's correct */
-
-	if (name[0] == 's' && name[1] == 'd') {
-		/* SCSI disks */
-		major = 8;
-		minor = (name[2] - 'a') << 4;
-		if (name[3] && name[4])
-			minor += 10 + (name[4] - '0');
-		else if (name[3])
-			minor += (name[3] - '0');
-	} else if (name[0] == 'h' && name[1] == 'd') {
-		/* IDE disks/cd's */
-		if (name[2] == 'a')
-			major = 3, minor = 0;
-		else if (name[2] == 'b')
-			major = 3, minor = 64;
-		else if (name[2] == 'c')
-			major = 22, minor = 0;
-		else if (name[2] == 'd')
-			major = 22, minor = 64;
-		else if (name[2] == 'e')
-			major = 33, minor = 0;
-		else if (name[2] == 'f')
-			major = 33, minor = 64;
-		else if (name[2] == 'g')
-			major = 34, minor = 0;
-		else if (name[2] == 'h')
-			major = 34, minor = 64;
-		else
-			return -1;
-		
-		if (name[3] && name[4])
-			minor += 10 + (name[4] - '0');
-		else if (name[3])
-			minor += (name[3] - '0');
-	} else if (name[0] == 's' && name[1] == 'r') {
-		/* SCSI cd's */
-		major = 11;
-		minor = name[2] - '0';
-	} else if (ptr_begins_static_str(name, "ida/") ||
-		   ptr_begins_static_str(name, "cciss/")) {
-		/* Compaq Smart Array "ida/c0d0{p1}" */
-		ptr = strchr(name, '/');
-		mkdir("/dev/ida", 0755);
-		mkdir("/dev/cciss", 0755);
-		major = ptr_begins_static_str(name, "ida/") ? 72 : 104 + charstar_to_int(ptr+2);
-		ptr = strchr(ptr, 'd');
-		minor = 16 * charstar_to_int(ptr+1);
-		ptr = strchr(ptr, 'p');
-		minor += charstar_to_int(ptr+1);
-	} else if (ptr_begins_static_str(name, "rd/")) {
-		/* DAC960 "rd/cXdXXpX" */
-		mkdir("/dev/rd", 0755);
-		major = 48 + charstar_to_int(name+4);
-		ptr = strchr(name+4, 'd');
-		minor = 8 * charstar_to_int(ptr+1);
-		ptr = strchr(ptr, 'p');
-		minor += charstar_to_int(ptr+1);
-	} else {
-		log_message("I don't know how to create device %s, please post bugreport to me!", dev);
-		return -1;
-	}
-
-	if (mknod(dev, type | 0600, makedev(major, minor))) {
-		log_perror(dev);
-		return -1;
-	}
-	
-	return 0;
-}
-#endif /* DISABLE_MEDIAS */
-
-
-/* mounts, creating the device if needed+possible */
-int my_mount(char *dev, char *location, char *fs, int force_rw)
-{
-	unsigned long flags = MS_MGC_VAL | (force_rw ? 0 : MS_RDONLY);
-	char * opts = NULL;
-	struct stat buf;
-	int rc;
-
-#ifndef DISABLE_MEDIAS
-	if (strcmp(fs, "nfs")) {
-	    rc = ensure_dev_exists(dev);
-	    if (rc != 0) {
-		    log_message("could not create required device file");
-		    return -1;
-	    }
-	}
-#endif
-
-	log_message("mounting %s on %s as type %s", dev, location, fs);
-
-	if (stat(location, &buf)) {
-		if (mkdir(location, 0755)) {
-			log_perror("could not create location dir");
-			return -1;
-		}
-	} else if (!S_ISDIR(buf.st_mode)) {
-		log_message("not a dir %s, will unlink and mkdir", location);
-		if (unlink(location)) {
-			log_perror("could not unlink");
-			return -1;
-		}
-		if (mkdir(location, 0755)) {
-			log_perror("could not create location dir");
-			return -1;
-		}
-	}
-
-#ifndef DISABLE_MEDIAS
-	if (!strcmp(fs, "vfat")) {
-		my_insmod("vfat", ANY_DRIVER_TYPE, NULL);
-		opts = "check=relaxed";
-	}
-
-	if (!strcmp(fs, "reiserfs"))
-		my_insmod("reiserfs", ANY_DRIVER_TYPE, NULL);
-
-	if (!strcmp(fs, "iso9660"))
-		my_insmod("isofs", ANY_DRIVER_TYPE, NULL);
-#endif
-
-#ifndef DISABLE_NETWORK
-	if (!strcmp(fs, "nfs")) {
-		int flags = MS_RDONLY;
-		my_insmod("nfs", ANY_DRIVER_TYPE, NULL);
-		log_message("preparing nfsmount for %s", dev);
-		rc = nfsmount_prepare(dev, &flags, &opts);
-		if (rc != 0)
-			return rc;
-	}
-#endif
-
-	rc = mount(dev, location, fs, flags, opts);
-	if (rc != 0) {
-		log_perror("mount failed");
-		rmdir(location);
-	}
-
-	return rc;
-}
diff --git a/mdk-stage1/mount.h b/mdk-stage1/mount.h
deleted file mode 100644
index 82795462f..000000000
--- a/mdk-stage1/mount.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _MOUNT_H_
-#define _MOUNT_H_
-
-#ifndef DISABLE_NETWORK
-#include "nfsmount.h"
-#endif
-
-int my_mount(char *dev, char *location, char *fs, int force_rw);
-
-#ifndef DISABLE_MEDIAS
-int ensure_dev_exists(char *dev);
-#endif
-
-#endif
diff --git a/mdk-stage1/mount_rpcgen.h b/mdk-stage1/mount_rpcgen.h
deleted file mode 100644
index d70ccaf9d..000000000
--- a/mdk-stage1/mount_rpcgen.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * Please do not edit this file.
- * It was generated using rpcgen.
- */
-
-#ifndef _MOUNT_H_RPCGEN
-#define _MOUNT_H_RPCGEN
-
-#include <rpc/rpc.h>
-
-#define MNTPATHLEN 1024
-#define MNTNAMLEN 255
-#define FHSIZE 32
-
-typedef char fhandle[FHSIZE];
-#ifdef __cplusplus 
-extern "C" bool_t xdr_fhandle(XDR *, fhandle);
-#elif __STDC__ 
-extern  bool_t xdr_fhandle(XDR *, fhandle);
-#else /* Old Style C */ 
-bool_t xdr_fhandle();
-#endif /* Old Style C */ 
-
-
-struct fhstatus {
-	u_int fhs_status;
-	union {
-		fhandle fhs_fhandle;
-	} fhstatus_u;
-};
-typedef struct fhstatus fhstatus;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_fhstatus(XDR *, fhstatus*);
-#elif __STDC__ 
-extern  bool_t xdr_fhstatus(XDR *, fhstatus*);
-#else /* Old Style C */ 
-bool_t xdr_fhstatus();
-#endif /* Old Style C */ 
-
-
-typedef char *dirpath;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_dirpath(XDR *, dirpath*);
-#elif __STDC__ 
-extern  bool_t xdr_dirpath(XDR *, dirpath*);
-#else /* Old Style C */ 
-bool_t xdr_dirpath();
-#endif /* Old Style C */ 
-
-
-typedef char *name;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_name(XDR *, name*);
-#elif __STDC__ 
-extern  bool_t xdr_name(XDR *, name*);
-#else /* Old Style C */ 
-bool_t xdr_name();
-#endif /* Old Style C */ 
-
-
-typedef struct mountbody *mountlist;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_mountlist(XDR *, mountlist*);
-#elif __STDC__ 
-extern  bool_t xdr_mountlist(XDR *, mountlist*);
-#else /* Old Style C */ 
-bool_t xdr_mountlist();
-#endif /* Old Style C */ 
-
-
-struct mountbody {
-	name ml_hostname;
-	dirpath ml_directory;
-	mountlist ml_next;
-};
-typedef struct mountbody mountbody;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_mountbody(XDR *, mountbody*);
-#elif __STDC__ 
-extern  bool_t xdr_mountbody(XDR *, mountbody*);
-#else /* Old Style C */ 
-bool_t xdr_mountbody();
-#endif /* Old Style C */ 
-
-
-typedef struct groupnode *groups;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_groups(XDR *, groups*);
-#elif __STDC__ 
-extern  bool_t xdr_groups(XDR *, groups*);
-#else /* Old Style C */ 
-bool_t xdr_groups();
-#endif /* Old Style C */ 
-
-
-struct groupnode {
-	name gr_name;
-	groups gr_next;
-};
-typedef struct groupnode groupnode;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_groupnode(XDR *, groupnode*);
-#elif __STDC__ 
-extern  bool_t xdr_groupnode(XDR *, groupnode*);
-#else /* Old Style C */ 
-bool_t xdr_groupnode();
-#endif /* Old Style C */ 
-
-
-typedef struct exportnode *exports;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_exports(XDR *, exports*);
-#elif __STDC__ 
-extern  bool_t xdr_exports(XDR *, exports*);
-#else /* Old Style C */ 
-bool_t xdr_exports();
-#endif /* Old Style C */ 
-
-
-struct exportnode {
-	dirpath ex_dir;
-	groups ex_groups;
-	exports ex_next;
-};
-typedef struct exportnode exportnode;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_exportnode(XDR *, exportnode*);
-#elif __STDC__ 
-extern  bool_t xdr_exportnode(XDR *, exportnode*);
-#else /* Old Style C */ 
-bool_t xdr_exportnode();
-#endif /* Old Style C */ 
-
-
-#define MOUNTPROG ((u_long)100005)
-#define MOUNTVERS ((u_long)1)
-
-#ifdef __cplusplus
-#define MOUNTPROC_NULL ((u_long)0)
-extern "C" void * mountproc_null_1(void *, CLIENT *);
-extern "C" void * mountproc_null_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_MNT ((u_long)1)
-extern "C" fhstatus * mountproc_mnt_1(dirpath *, CLIENT *);
-extern "C" fhstatus * mountproc_mnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_DUMP ((u_long)2)
-extern "C" mountlist * mountproc_dump_1(void *, CLIENT *);
-extern "C" mountlist * mountproc_dump_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_UMNT ((u_long)3)
-extern "C" void * mountproc_umnt_1(dirpath *, CLIENT *);
-extern "C" void * mountproc_umnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_UMNTALL ((u_long)4)
-extern "C" void * mountproc_umntall_1(void *, CLIENT *);
-extern "C" void * mountproc_umntall_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORT ((u_long)5)
-extern "C" exports * mountproc_export_1(void *, CLIENT *);
-extern "C" exports * mountproc_export_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORTALL ((u_long)6)
-extern "C" exports * mountproc_exportall_1(void *, CLIENT *);
-extern "C" exports * mountproc_exportall_1_svc(void *, struct svc_req *);
-
-#elif __STDC__
-#define MOUNTPROC_NULL ((u_long)0)
-extern  void * mountproc_null_1(void *, CLIENT *);
-extern  void * mountproc_null_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_MNT ((u_long)1)
-extern  fhstatus * mountproc_mnt_1(dirpath *, CLIENT *);
-extern  fhstatus * mountproc_mnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_DUMP ((u_long)2)
-extern  mountlist * mountproc_dump_1(void *, CLIENT *);
-extern  mountlist * mountproc_dump_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_UMNT ((u_long)3)
-extern  void * mountproc_umnt_1(dirpath *, CLIENT *);
-extern  void * mountproc_umnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_UMNTALL ((u_long)4)
-extern  void * mountproc_umntall_1(void *, CLIENT *);
-extern  void * mountproc_umntall_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORT ((u_long)5)
-extern  exports * mountproc_export_1(void *, CLIENT *);
-extern  exports * mountproc_export_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORTALL ((u_long)6)
-extern  exports * mountproc_exportall_1(void *, CLIENT *);
-extern  exports * mountproc_exportall_1_svc(void *, struct svc_req *);
-
-#else /* Old Style C */ 
-#define MOUNTPROC_NULL ((u_long)0)
-extern  void * mountproc_null_1();
-extern  void * mountproc_null_1_svc();
-#define MOUNTPROC_MNT ((u_long)1)
-extern  fhstatus * mountproc_mnt_1();
-extern  fhstatus * mountproc_mnt_1_svc();
-#define MOUNTPROC_DUMP ((u_long)2)
-extern  mountlist * mountproc_dump_1();
-extern  mountlist * mountproc_dump_1_svc();
-#define MOUNTPROC_UMNT ((u_long)3)
-extern  void * mountproc_umnt_1();
-extern  void * mountproc_umnt_1_svc();
-#define MOUNTPROC_UMNTALL ((u_long)4)
-extern  void * mountproc_umntall_1();
-extern  void * mountproc_umntall_1_svc();
-#define MOUNTPROC_EXPORT ((u_long)5)
-extern  exports * mountproc_export_1();
-extern  exports * mountproc_export_1_svc();
-#define MOUNTPROC_EXPORTALL ((u_long)6)
-extern  exports * mountproc_exportall_1();
-extern  exports * mountproc_exportall_1_svc();
-#endif /* Old Style C */ 
-
-#endif /* !_MOUNT_H_RPCGEN */
diff --git a/mdk-stage1/network.c b/mdk-stage1/network.c
deleted file mode 100644
index 3d3107ddf..000000000
--- a/mdk-stage1/network.c
+++ /dev/null
@@ -1,833 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <sys/socket.h>
-#include <net/if.h>
-#include <arpa/inet.h>
-#include <net/route.h>
-#include <sys/ioctl.h>
-#include <sys/mount.h>
-#include <stdio.h>
-#include <netdb.h>
-#include <resolv.h>
-
-#include "stage1.h"
-#include "frontend.h"
-#include "modules.h"
-#include "probing.h"
-#include "log.h"
-#include "mount.h"
-#include "automatic.h"
-#include "dhcp.h"
-#include "adsl.h"
-#include "url.h"
-#include "dns.h"
-
-#include "network.h"
-
-
-static void error_message_net(void)  /* reduce code size */
-{
-	stg1_error_message("Could not configure network.");
-}
-
-
-int configure_net_device(struct interface_info * intf)
-{
-	struct ifreq req;
-	struct rtentry route;
-	int s;
-	struct sockaddr_in addr;
-	struct in_addr ia;
-	char ip[20], nm[20], nw[20], bc[20];
-	
-	addr.sin_family = AF_INET;
-	addr.sin_port = 0;
-	
-	memcpy(&ia, &intf->ip, sizeof(intf->ip));
-	strcpy(ip, inet_ntoa(ia));
-	
-	memcpy(&ia, &intf->netmask, sizeof(intf->netmask));
-	strcpy(nm, inet_ntoa(ia));
-	
-	memcpy(&ia, &intf->broadcast, sizeof(intf->broadcast));
-	strcpy(bc, inet_ntoa(ia));
-	
-	memcpy(&ia, &intf->network, sizeof(intf->network));
-	strcpy(nw, inet_ntoa(ia));
-
-	log_message("configuring device %s ip: %s nm: %s nw: %s bc: %s", intf->device, ip, nm, nw, bc);
-
-	if (IS_TESTING)
-		return 0;
-
-	s = socket(AF_INET, SOCK_DGRAM, 0);
-	if (s < 0) {
-		log_perror("socket");
-		error_message_net();
-		return 1;
-	}
-
-	strcpy(req.ifr_name, intf->device);
-
-	if (intf->is_up == 1) {
-		log_message("interface already up, downing before reconfigure");
-
-		req.ifr_flags = 0;
-		if (ioctl(s, SIOCSIFFLAGS, &req)) {
-			close(s);
-			log_perror("SIOCSIFFLAGS (downing)");
-			error_message_net();
-			return 1;
-		}
-	}
-		
-	/* sets IP address */
-	addr.sin_port = 0;
-	memcpy(&addr.sin_addr, &intf->ip, sizeof(intf->ip));
-	memcpy(&req.ifr_addr, &addr, sizeof(addr));
-	if (ioctl(s, SIOCSIFADDR, &req)) {
-		close(s);
-		log_perror("SIOCSIFADDR");
-		error_message_net();
-		return 1;
-	}
-
-	/* sets broadcast */
-	memcpy(&addr.sin_addr, &intf->broadcast, sizeof(intf->broadcast));
-	memcpy(&req.ifr_broadaddr, &addr, sizeof(addr));
-	if (ioctl(s, SIOCSIFBRDADDR, &req)) {
-		close(s);
-		log_perror("SIOCSIFBRDADDR");
-		error_message_net();
-		return 1;
-	}
-
-	/* sets netmask */
-	memcpy(&addr.sin_addr, &intf->netmask, sizeof(intf->netmask));
-	memcpy(&req.ifr_netmask, &addr, sizeof(addr));
-	if (ioctl(s, SIOCSIFNETMASK, &req)) {
-		close(s);
-		log_perror("SIOCSIFNETMASK");
-		error_message_net();
-		return 1;
-	}
-
-	if (intf->is_ptp)
-		req.ifr_flags = IFF_UP | IFF_RUNNING | IFF_POINTOPOINT | IFF_NOARP;
-	else
-		req.ifr_flags = IFF_UP | IFF_RUNNING | IFF_BROADCAST;
-
-	/* brings up networking! */
-	if (ioctl(s, SIOCSIFFLAGS, &req)) {
-		close(s);
-		log_perror("SIOCSIFFLAGS (upping)");
-		error_message_net();
-		return 1;
-	}
-
-	memset(&route, 0, sizeof(route));
-	route.rt_dev = intf->device;
-	route.rt_flags = RTF_UP;
-	
-	memcpy(&addr.sin_addr, &intf->network, sizeof(intf->network));
-	memcpy(&route.rt_dst, &addr, sizeof(addr));
-	
-	memcpy(&addr.sin_addr, &intf->netmask, sizeof(intf->netmask));
-	memcpy(&route.rt_genmask, &addr, sizeof(addr));
-
-	/* adds route */
-	if (ioctl(s, SIOCADDRT, &route)) {
-		close(s);
-		log_perror("SIOCADDRT");
-		error_message_net();
-		return 1;
-	}
-
-	close(s);
-
-	intf->is_up = 1;
-
-	if (intf->boot_proto != BOOTPROTO_DHCP && !streq(intf->device, "lo")) {
-		/* I need to sleep a bit in order for kernel to finish
-		   init of the network device; if not, first sendto() for
-		   gethostbyaddr will get an EINVAL. */
-		wait_message("Bringing up networking...");
-		sleep(2);
-		remove_wait_message();
-	}
-
-	return 0;
-}
-
-/* host network informations */ 
-char * hostname = NULL;
-char * domain = NULL;
-struct in_addr gateway = { 0 };
-struct in_addr dns_server = { 0 };
-struct in_addr dns_server2 = { 0 };
-
-static int add_default_route(void)
-{
-	int s;
-	struct rtentry route;
-	struct sockaddr_in addr;
-
-	if (IS_TESTING)
-		return 0;
-
-	if (gateway.s_addr == 0) {
-		log_message("no gateway provided, can't add default route");
-		return 0;
-	}
-
-	s = socket(AF_INET, SOCK_DGRAM, 0);
-	if (s < 0) {
-		close(s);
-		log_perror("socket");
-		error_message_net();
-		return 1;
-	}
-
-	memset(&route, 0, sizeof(route));
-
-	addr.sin_family = AF_INET;
-	addr.sin_port = 0;
-	addr.sin_addr = gateway;
-	memcpy(&route.rt_gateway, &addr, sizeof(addr));
-
-	addr.sin_addr.s_addr = INADDR_ANY;
-	memcpy(&route.rt_dst, &addr, sizeof(addr));
-	memcpy(&route.rt_genmask, &addr, sizeof(addr));
-
-	route.rt_flags = RTF_UP | RTF_GATEWAY;
-	route.rt_metric = 0;
-
-	if (ioctl(s, SIOCADDRT, &route)) {
-		close(s);
-		log_perror("SIOCADDRT");
-		error_message_net();
-		return 1;
-	}
-
-	close(s);
-	
-	return 0;
-}
-
-
-static int write_resolvconf(void) {
-	char * filename = "/etc/resolv.conf";
-	FILE * f;
-	
-	if (dns_server.s_addr == 0) {
-		log_message("resolvconf needs a dns server");
-		return -1;
-	}
-
-	f = fopen(filename, "w");
-	if (!f) {
-		log_perror(filename);
-		return -1;
-	}
-
-	if (domain)
-		fprintf(f, "search %s\n", domain); /* we can live without the domain search (user will have to enter fully-qualified names) */
-	fprintf(f, "nameserver %s\n", inet_ntoa(dns_server));
-	if (dns_server2.s_addr != 0)
-		fprintf(f, "nameserver %s\n", inet_ntoa(dns_server2));
-
-	fclose(f);
-	res_init();		/* reinit the resolver so DNS changes take affect */
-
-	return 0;
-}
-
-
-static int save_netinfo(struct interface_info * intf) {
-	char * file_network = "/tmp/network";
-	char file_intf[500];
-	FILE * f;
-	
-	f = fopen(file_network, "w");
-	if (!f) {
-		log_perror(file_network);
-		return -1;
-	}
-
-	fprintf(f, "NETWORKING=yes\n");
-	fprintf(f, "FORWARD_IPV4=false\n");
-
-	if (hostname)
-		fprintf(f, "HOSTNAME=%s\n", hostname);
-	if (domain)
-		fprintf(f, "DOMAINNAME=%s\n", domain);
-	if (dhcp_hostname && !streq(dhcp_hostname, ""))
-		fprintf(f, "DHCP_HOSTNAME=%s\n", dhcp_hostname);
-	
-	if (gateway.s_addr != 0)
-		fprintf(f, "GATEWAY=%s\n", inet_ntoa(gateway));
-
-	fclose(f);
-
-	
-	strcpy(file_intf, "/tmp/ifcfg-");
-	strcat(file_intf, intf->device);
-
-	f = fopen(file_intf, "w");
-	if (!f) {
-		log_perror(file_intf);
-		return -1;
-	}
-
-	fprintf(f, "DEVICE=%s\n", intf->device);
-
-	if (intf->boot_proto == BOOTPROTO_DHCP)
-		fprintf(f, "BOOTPROTO=dhcp\n");
-	else if (intf->boot_proto == BOOTPROTO_STATIC) {
-		fprintf(f, "BOOTPROTO=static\n");
-		fprintf(f, "IPADDR=%s\n", inet_ntoa(intf->ip));
-		fprintf(f, "NETMASK=%s\n", inet_ntoa(intf->netmask));
-		fprintf(f, "NETWORK=%s\n", inet_ntoa(intf->network));
-		fprintf(f, "BROADCAST=%s\n", inet_ntoa(intf->broadcast));
-	} else if (intf->boot_proto == BOOTPROTO_ADSL_PPPOE) {
-		fprintf(f, "BOOTPROTO=adsl_pppoe\n");
-		fprintf(f, "USER=%s\n", intf->user);
-		fprintf(f, "PASS=%s\n", intf->pass);
-	}
-
-	fclose(f);
-
-	return 0;
-}
-
-
-char * guess_netmask(char * ip_addr)
-{
-	struct in_addr addr;
-	unsigned long int tmp;
-
-	if (streq(ip_addr, "") || !inet_aton(ip_addr, &addr))
-		return "";
-
-	log_message("guessing netmask");
-
-	tmp = ntohl(addr.s_addr);
-	
-	if (((tmp & 0xFF000000) >> 24) <= 127)
-		return "255.0.0.0";
-	else if (((tmp & 0xFF000000) >> 24) <= 191)
-		return "255.255.0.0";
-	else 
-		return "255.255.255.0";
-}
-
-
-static void static_ip_callback(char ** strings)
-{
-	struct in_addr addr;
-
-	if (!inet_aton(strings[0], &addr))
-		return;
-
-	if (!strcmp(strings[1], "")) {
-		char * ptr;
-		strings[1] = strdup(strings[0]);
-		ptr = strrchr(strings[1], '.');
-		if (ptr)
-			*(ptr+1) = '\0';
-	}
-
-	if (!strcmp(strings[2], ""))
-		strings[2] = strdup(strings[1]);
-
-	if (!strcmp(strings[3], ""))
-		strings[3] = strdup(guess_netmask(strings[0]));
-}
-
-
-static enum return_type setup_network_interface(struct interface_info * intf)
-{
-	enum return_type results;
-	char * bootprotos[] = { "Static", "DHCP", "ADSL", NULL };
-	char * bootprotos_auto[] = { "static", "dhcp", "adsl" };
-	char * choice;
-
-	results = ask_from_list_auto("Please choose the desired IP attribution.", bootprotos, &choice, "network", bootprotos_auto);
-	if (results != RETURN_OK)
-		return results;
-
-	if (!strcmp(choice, "Static")) {
-		char * questions[] = { "IP of this machine", "IP of DNS", "IP of default gateway", "Netmask", NULL };
-		char * questions_auto[] = { "ip", "dns", "gateway", "netmask" };
-		static char ** answers = NULL;
-		struct in_addr addr;
-
-		results = ask_from_entries_auto("Please enter the network information. (leave netmask blank for Internet standard)",
-						questions, &answers, 16, questions_auto, static_ip_callback);
-		if (results != RETURN_OK)
-			return setup_network_interface(intf);
-
-		if (streq(answers[0], "") || !inet_aton(answers[0], &addr)) {
-			stg1_error_message("Invalid IP address.");
-			return setup_network_interface(intf);
-		}
-		memcpy(&intf->ip, &addr, sizeof(addr));
-
-		if (!inet_aton(answers[1], &dns_server)) {
-			log_message("invalid DNS");
-			dns_server.s_addr = 0; /* keep an understandable state */
-		}
-
-		if (!inet_aton(answers[2], &gateway)) {
-			log_message("invalid gateway");
-			gateway.s_addr = 0; /* keep an understandable state */
-		}
-
-		if ((streq(answers[3], "") && inet_aton(guess_netmask(answers[0]), &addr))
-		    || inet_aton(answers[3], &addr))
-			memcpy(&intf->netmask, &addr, sizeof(addr));
-		else {
-			stg1_error_message("Invalid netmask.");
-			return setup_network_interface(intf);
-		}
-
-		*((uint32_t *) &intf->broadcast) = (*((uint32_t *) &intf->ip) &
-						    *((uint32_t *) &intf->netmask)) | ~(*((uint32_t *) &intf->netmask));
-
-		inet_aton("255.255.255.255", &addr);
-		if (!memcmp(&addr, &intf->netmask, sizeof(addr))) {
-			log_message("netmask is 255.255.255.255 -> point to point device");
-			intf->network = gateway;
-			intf->is_ptp = 1;
-		} else {
-			*((uint32_t *) &intf->network) = *((uint32_t *) &intf->ip) & *((uint32_t *) &intf->netmask);
-			intf->is_ptp = 0;
-		}
-		intf->boot_proto = BOOTPROTO_STATIC;
-
-		if (configure_net_device(intf))
-			return RETURN_ERROR;
-
-	} else if (streq(choice, "DHCP")) {
-		results = perform_dhcp(intf);
-
-		if (results == RETURN_BACK)
-			return setup_network_interface(intf);
-		if (results == RETURN_ERROR)
-			return results;
-		intf->boot_proto = BOOTPROTO_DHCP;
-
-		if (configure_net_device(intf))
-			return RETURN_ERROR;
-
-	} else if (streq(choice, "ADSL")) {
-		results = perform_adsl(intf);
-
-		if (results == RETURN_BACK)
-			return setup_network_interface(intf);
-		if (results == RETURN_ERROR)
-			return results;
-	} else
-		return RETURN_ERROR;
-	
-	return add_default_route();
-}
-
-
-static enum return_type configure_network(struct interface_info * intf)
-{
-	char * dnshostname;
-
-	if (hostname && domain)
-		return RETURN_OK;
-
-	dnshostname = mygethostbyaddr(inet_ntoa(intf->ip));
-
-	if (dnshostname) {
-		hostname = strdup(dnshostname);
-		domain = strchr(strdup(hostname), '.') + 1;
-		log_message("got hostname and domain from dns entry, %s and %s", hostname, domain);
-		return RETURN_OK;
-	}
-
-	log_message("reverse name lookup on self failed");
-
-	if (domain)
-		return RETURN_OK;
-
-	if (dns_server.s_addr != 0) {
-		wait_message("Trying to resolve dns...");
-		dnshostname = mygethostbyaddr(inet_ntoa(dns_server));
-		remove_wait_message();
-	}
-
-	if (dnshostname) {
-		domain = strchr(strdup(dnshostname), '.') + 1;
-		log_message("got domain from DNS fullname, %s", domain);
-	} else {
-		enum return_type results;
-		char * questions[] = { "Host name", "Domain name", NULL };
-		char * questions_auto[] = { "hostname", "domain" };
-		static char ** answers = NULL;
-		char * boulet;
-		
-		log_message("reverse name lookup on DNS failed");
-		
-		results = ask_from_entries_auto("I could not guess hostname and domain name; please fill in this information. "
-						"Valid answers are for example: `mybox' for hostname and `mynetwork.com' for "
-						"domain name, for a machine called `mybox.mynetwork.com' on the Internet.",
-						questions, &answers, 32, questions_auto, NULL);
-		if (results != RETURN_OK)
-			return results;
-		
-		hostname = answers[0];
-		if ((boulet = strchr(hostname, '.')) != NULL)
-			boulet[0] = '\0';
-		domain = answers[1];
-	}
-
-	return RETURN_OK;
-}
-
-
-static enum return_type bringup_networking(struct interface_info * intf)
-{
-	static struct interface_info loopback;
-	enum return_type results = RETURN_ERROR;
-	
-	my_insmod("af_packet", ANY_DRIVER_TYPE, NULL);
-
-	while (results != RETURN_OK) {
-		results = setup_network_interface(intf);
-		if (results != RETURN_OK)
-			return results;
-		write_resolvconf();
-		results = configure_network(intf);
-	}
-
-	write_resolvconf(); /* maybe we have now domain to write also */
-
-	if (loopback.is_up == 0) {
-		int rc;
-		strcpy(loopback.device, "lo");
-		loopback.is_ptp = 0;
-		loopback.is_up = 0;
-		loopback.ip.s_addr = htonl(0x7f000001);
-		loopback.netmask.s_addr = htonl(0xff000000);
-		loopback.broadcast.s_addr = htonl(0x7fffffff);
-		loopback.network.s_addr = htonl(0x7f000000);
-		rc = configure_net_device(&loopback);
-		if (rc)
-			return RETURN_ERROR;
-	}
-
-	return RETURN_OK;
-}
-
-
-static char * interface_select(void)
-{
-	char ** interfaces, ** ptr;
-	char * descriptions[50];
-	char * choice;
-	int i, count = 0;
-	enum return_type results;
-
-	interfaces = get_net_devices();
-
-	ptr = interfaces;
-	while (ptr && *ptr) {
-		count++;
-		ptr++;
-	}
-
-	if (count == 0) {
-		stg1_error_message("No NET device found.\n"
-				   "Hint: if you're using a Laptop, note that PCMCIA Network adapters are now supported either with `pcmcia.img' or `network.img', please try both these bootdisks.");
-		i = ask_insmod(NETWORK_DEVICES);
-		if (i == RETURN_BACK)
-			return NULL;
-		return interface_select();
-	}
-
-	if (count == 1)
-		return *interfaces;
-
-	i = 0;
-	while (interfaces[i]) {
-		descriptions[i] = get_net_intf_description(interfaces[i]);
-		i++;
-	}
-
-	results = ask_from_list_comments_auto("Please choose the NET device to use for the installation.",
-					      interfaces, descriptions, &choice, "interface", interfaces);
-
-	if (results != RETURN_OK)
-		return NULL;
-
-	return choice;
-}
-
-
-
-/* -=-=-- */
-
-
-static enum return_type intf_select_and_up(void)
-{
-	static struct interface_info intf[20];
-	static int num_interfaces = 0;
-	struct interface_info * sel_intf = NULL;
-	int i;
-	enum return_type results;
-	char * iface = interface_select();
-	
-	if (iface == NULL)
-		return RETURN_BACK;
-	
-	for (i = 0; i < num_interfaces ; i++)
-		if (!strcmp(intf[i].device, iface))
-			sel_intf = &(intf[i]);
-	
-	if (sel_intf == NULL) {
-		sel_intf = &(intf[num_interfaces]);
-		strcpy(sel_intf->device, iface);
-		sel_intf->is_up = 0;
-		num_interfaces++;
-	}
-	
-	results = bringup_networking(sel_intf);
-
-	if (results == RETURN_OK)
-		save_netinfo(sel_intf);
-	
-	return results;
-}
-
-
-
-enum return_type nfs_prepare(void)
-{
-	char * questions[] = { "NFS server name", DISTRIB_NAME " directory", NULL };
-	char * questions_auto[] = { "server", "directory", NULL };
-	static char ** answers = NULL;
-	char * nfsmount_location;
-	enum return_type results = intf_select_and_up();
-
-	if (results != RETURN_OK)
-		return results;
-
-	do {
-		results = ask_from_entries_auto("Please enter the name or IP address of your NFS server, "
-						"and the directory containing the " DISTRIB_NAME " Distribution.",
-						questions, &answers, 40, questions_auto, NULL);
-		if (results != RETURN_OK || streq(answers[0], "")) {
-			unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
-			return nfs_prepare();
-		}
-		
-		nfsmount_location = malloc(strlen(answers[0]) + strlen(answers[1]) + 2);
-		strcpy(nfsmount_location, answers[0]);
-		strcat(nfsmount_location, ":");
-		strcat(nfsmount_location, answers[1]);
-		
-		if (my_mount(nfsmount_location, IMAGE_LOCATION, "nfs", 0) == -1) {
-			stg1_error_message("I can't mount the directory from the NFS server.");
-			results = RETURN_BACK;
-			continue;
-		}
-
-		if (access(IMAGE_LOCATION LIVE_LOCATION, R_OK)) {
-			stg1_error_message("That NFS volume does not seem to contain the " DISTRIB_NAME " Distribution.");
-			umount(IMAGE_LOCATION);
-			results = RETURN_BACK;
-		}
-	}
-	while (results == RETURN_BACK);
-
-	log_message("found the " DISTRIB_NAME " Installation, good news!");
-
-	if (IS_SPECIAL_STAGE2) {
-		if (load_ramdisk() != RETURN_OK) {
-			stg1_error_message("Could not load program into memory.");
-			return nfs_prepare();
-		}
-	}
-
-	if (IS_RESCUE)
-		umount(IMAGE_LOCATION);
-
-	method_name = strdup("nfs");
-	return RETURN_OK;
-}
-
-
-enum return_type ftp_prepare(void)
-{
-	char * questions[] = { "FTP server", DISTRIB_NAME " directory", "Login", "Password", NULL };
-	char * questions_auto[] = { "server", "directory", "user", "pass", NULL };
-	static char ** answers = NULL;
-	enum return_type results;
-
-	if (!ramdisk_possible()) {
-		stg1_error_message("FTP install needs more than %d Mbytes of memory (detected %d Mbytes).",
-			      MEM_LIMIT_RAMDISK, total_memory());
-		return RETURN_ERROR;
-	}
-
-	results = intf_select_and_up();
-
-	if (results != RETURN_OK)
-		return results;
-
-	do {
-		char location_full[500];
-		int ftp_serv_response;
-		int fd, size;
-
-		results = ask_from_entries_auto("Please enter the name or IP address of the FTP server, "
-						"the directory containing the " DISTRIB_NAME " Distribution, "
-						"and the login/pass if necessary (leave login blank for anonymous).",
-						questions, &answers, 40, questions_auto, NULL);
-		if (results != RETURN_OK || streq(answers[0], "")) {
-			unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
-			return ftp_prepare();
-		}
-
-		log_message("FTP: trying to connect to %s", answers[0]);
-
-		ftp_serv_response = ftp_open_connection(answers[0], answers[2], answers[3], "");
-		if (ftp_serv_response < 0) {
-			log_message("FTP: error connect %d", ftp_serv_response);
-			if (ftp_serv_response == FTPERR_BAD_HOSTNAME)
-				stg1_error_message("Error: bad hostname.");
-			else if (ftp_serv_response == FTPERR_FAILED_CONNECT)
-				stg1_error_message("Error: failed to connect to remote host.");
-			else
-				stg1_error_message("Error: couldn't connect.");
-			results = RETURN_BACK;
-			continue;
-		}
-		strcpy(location_full, answers[1]);
-		strcat(location_full, get_ramdisk_realname());
-
-		log_message("FTP: trying to retrieve %s", location_full);
-
-		fd = ftp_start_download(ftp_serv_response, location_full, &size);
-		if (fd < 0) {
-			log_message("FTP: error get %d", fd);
-			if (fd == FTPERR_PASSIVE_ERROR)
-				stg1_error_message("Error: error with passive connection.");
-			else if (fd == FTPERR_FILE_NOT_FOUND)
-				stg1_error_message("Error: file not found (%s).", location_full);
-			else if (fd == FTPERR_BAD_SERVER_RESPONSE)
-				stg1_error_message("Error: bad server response (server too busy?).");
-			else
-				stg1_error_message("Error: couldn't retrieve Installation program.");
-			results = RETURN_BACK;
-			continue;
-		}
-
-		log_message("FTP: size of download %d bytes", size);
-		
-		results = load_ramdisk_fd(fd, size);
-		if (results == RETURN_OK)
-			ftp_end_data_command(ftp_serv_response);
-		else
-			return results;
-
-		method_name = strdup("ftp");
-		add_to_env("HOST", answers[0]);
-		add_to_env("PREFIX", answers[1]);
-		if (strcmp(answers[2], "")) {
-			add_to_env("LOGIN", answers[2]);
-			add_to_env("PASSWORD", answers[3]);
-		}
-	}
-	while (results == RETURN_BACK);
-
-	return RETURN_OK;
-}
-
-enum return_type http_prepare(void)
-{
-	char * questions[] = { "HTTP server", DISTRIB_NAME " directory", NULL };
-	char * questions_auto[] = { "server", "directory", NULL };
-	static char ** answers = NULL;
-	enum return_type results;
-
-	if (!ramdisk_possible()) {
-		stg1_error_message("HTTP install needs more than %d Mbytes of memory (detected %d Mbytes).",
-			      MEM_LIMIT_RAMDISK, total_memory());
-		return RETURN_ERROR;
-	}
-
-	results = intf_select_and_up();
-
-	if (results != RETURN_OK)
-		return results;
-
-	do {
-		char location_full[500];
-		int fd, size;
-
-		results = ask_from_entries_auto("Please enter the name or IP address of the HTTP server, "
-						"and the directory containing the " DISTRIB_NAME " Distribution.",
-						questions, &answers, 40, questions_auto, NULL);
-		if (results != RETURN_OK || streq(answers[0], "")) {
-			unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
-			return http_prepare();
-		}
-
-		strcpy(location_full, answers[1]);
-		strcat(location_full, get_ramdisk_realname());
-
-		log_message("HTTP: trying to retrieve %s from %s", location_full, answers[0]);
-		
-		fd = http_download_file(answers[0], location_full, &size);
-		if (fd < 0) {
-			log_message("HTTP: error %d", fd);
-			if (fd == FTPERR_FAILED_CONNECT)
-				stg1_error_message("Error: couldn't connect to server.");
-			else
-				stg1_error_message("Error: couldn't get file (%s).", location_full);
-			results = RETURN_BACK;
-			continue;
-		}
-
-		log_message("HTTP: size of download %d bytes", size);
-		
-		if (load_ramdisk_fd(fd, size) != RETURN_OK)
-			return RETURN_ERROR;
-
-		method_name = strdup("http");
-		sprintf(location_full, "http://%s/%s", answers[0], answers[1]);
-		add_to_env("URLPREFIX", location_full);
-	}
-	while (results == RETURN_BACK);
-
-	return RETURN_OK;
-
-}
diff --git a/mdk-stage1/network.h b/mdk-stage1/network.h
deleted file mode 100644
index 02eea45b6..000000000
--- a/mdk-stage1/network.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _NETWORK_H_
-#define _NETWORK_H_
-
-#include <netinet/in.h>
-#include <netinet/ip.h>
-#include <arpa/inet.h>
-
-
-enum return_type nfs_prepare(void);
-enum return_type ftp_prepare(void);
-enum return_type http_prepare(void);
-
-
-enum boot_proto_type { BOOTPROTO_STATIC, BOOTPROTO_DHCP, BOOTPROTO_ADSL_PPPOE };
-
-/* all of these in_addr things are in network byte order! */
-struct interface_info {
-	char device[10];
-	int is_ptp, is_up;
-	struct in_addr ip, netmask, broadcast, network;
-	enum boot_proto_type boot_proto;
-	char *user, *pass; /* for ADSL connection */
-};
-
-
-/* these are to be used only by dhcp.c */
-
-char * guess_netmask(char * ip_addr);
-
-int configure_net_device(struct interface_info * intf);
-
-extern char * hostname;
-extern char * domain;
-extern struct in_addr gateway;
-extern struct in_addr dns_server;
-extern struct in_addr dns_server2;
-
-
-
-#endif
diff --git a/mdk-stage1/newt-frontend.c b/mdk-stage1/newt-frontend.c
deleted file mode 100644
index f50defee1..000000000
--- a/mdk-stage1/newt-frontend.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-
-/*
- * Each different frontend must implement all functions defined in frontend.h
- */
-
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <sys/time.h>
-#include "newt/newt.h"
-
-#include "frontend.h"
-
-void init_frontend(char * welcome_msg)
-{
-	int i;
-	for (i=0; i<38; i++) printf("\n");
-	newtInit();
-	newtCls();
-	
-	newtDrawRootText(0, 0, welcome_msg);
-	
-	newtPushHelpLine(" <Alt-F1> for here, <Alt-F3> to see the logs, <Alt-F4> for kernel msg");
-	newtRefresh();
-}
-
-
-void finish_frontend(void)
-{
-	newtFinished();
-}
-
-
-void verror_message(char *msg, va_list ap)
-{
-	newtWinMessagev("Error", "Ok", msg, ap);
-}
-
-void vinfo_message(char *msg, va_list ap)
-{
-	newtWinMessagev("Notice", "Ok", msg, ap);
-}
-
-
-void vwait_message(char *msg, va_list ap)
-{
-	int width, height;
-	char * title = "Please wait...";
-	newtComponent c, f;
-	newtGrid grid;
-	char * buf = NULL;
-	char * flowed;
-	int size = 0;
-	int i = 0;
-	
-	do {
-		size += 1000;
-		if (buf) free(buf);
-		buf = malloc(size);
-		i = vsnprintf(buf, size, msg, ap);
-	} while (i >= size || i == -1);
-
-	flowed = newtReflowText(buf, 60, 5, 5, &width, &height);
-	
-	c = newtTextbox(-1, -1, width, height, NEWT_TEXTBOX_WRAP);
-	newtTextboxSetText(c, flowed);
-
-	grid = newtCreateGrid(1, 1);
-	newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, c, 0, 0, 0, 0, 0, 0);
-	newtGridWrappedWindow(grid, title);
-
-	free(flowed);
-	free(buf);
-
-	f = newtForm(NULL, NULL, 0);
-	newtFormAddComponent(f, c);
-
-	newtDrawForm(f);
-	newtRefresh();
-	newtFormDestroy(f);
-}
-
-void remove_wait_message(void)
-{
-	newtPopWindow();
-}
-
-
-static newtComponent form = NULL, scale = NULL;
-static int size_progress;
-static int actually_drawn;
-static char * msg_progress;
-
-void init_progression(char *msg, int size)
-{
-	size_progress = size;
-	if (size) {
-		actually_drawn = 0;
-		newtCenteredWindow(70, 5, "Please wait...");
-		form = newtForm(NULL, NULL, 0);
-		newtFormAddComponent(form, newtLabel(1, 1, msg));
-		scale = newtScale(1, 3, 68, size);
-		newtFormAddComponent(form, scale);
-		newtDrawForm(form);
-		newtRefresh();
-	}
-	else {
-		wait_message(msg);
-		msg_progress = msg;
-	}
-}
-
-void update_progression(int current_size)
-{
-	if (size_progress) {
-		if (current_size <= size_progress)
-			newtScaleSet(scale, current_size);
-		newtRefresh();
-	}
-	else {
-		struct timeval t;
-		int time;
-		static int last_time = -1;
-		gettimeofday(&t, NULL);
-		time = t.tv_sec*3 + t.tv_usec/300000;
-		if (time != last_time) {
-			char msg_prog_final[500];
-			sprintf(msg_prog_final, "%s (%d bytes read) ", msg_progress, current_size);
-			remove_wait_message();
-			wait_message(msg_prog_final);
-		}
-		last_time = time;
-	}
-}
-
-void end_progression(void)
-{
-	if (size_progress) {
-		newtPopWindow();
-		newtFormDestroy(form);
-	}
-	else
-		remove_wait_message();
-}
-
-
-enum return_type ask_from_list_comments(char *msg, char ** elems, char ** elems_comments, char ** choice)
-{
-	char * items[500];
-	int answer = 0, rc;
-	char ** sav_elems = elems;
-	int i;
-
-	i = 0;
-	while (elems && *elems) {
-		int j = (*elems_comments) ? strlen(*elems_comments) : 0;
-		items[i] = malloc(sizeof(char) * (strlen(*elems) + j + 4));
-		strcpy(items[i], *elems);
-		if (*elems_comments) {
-			strcat(items[i], " (");
-			strcat(items[i], *elems_comments);
-			strcat(items[i], ")");
-		}
-		elems_comments++;
-		i++;
-		elems++;
-	}
-	items[i] = NULL;
-
-	rc = newtWinMenu("Please choose...", msg, 52, 5, 5, 7, items, &answer, "Ok", "Cancel", NULL);
-
-	if (rc == 2)
-		return RETURN_BACK;
-
-	*choice = strdup(sav_elems[answer]);
-
-	return RETURN_OK;
-}
-
-
-enum return_type ask_from_list(char *msg, char ** elems, char ** choice)
-{
-	int answer = 0, rc;
-
-	rc = newtWinMenu("Please choose...", msg, 52, 5, 5, 7, elems, &answer, "Ok", "Cancel", NULL);
-
-	if (rc == 2)
-		return RETURN_BACK;
-
-	*choice = strdup(elems[answer]);
-
-	return RETURN_OK;
-}
-
-
-enum return_type ask_yes_no(char *msg)
-{
-	int rc;
-
-	rc = newtWinTernary("Please answer...", "Yes", "No", "Back", msg);
-
-	if (rc == 1)
-		return RETURN_OK;
-	else if (rc == 3)
-		return RETURN_BACK;
-	else return RETURN_ERROR;
-}
-
-
-static void (*callback_real_function)(char ** strings) = NULL;
-
-static void default_callback(newtComponent co __attribute__ ((unused)), void * data)
-{
-	newtComponent * entries = data;
-	char * strings[50], ** ptr;
-
-	if (!callback_real_function)
-		return;
-
-	ptr = strings;
-	while (entries && *entries) {
-		*ptr = newtEntryGetValue(*entries);
-		entries++;
-		ptr++;
-	}
-
-	callback_real_function(strings);
-
-	ptr = strings;
-	entries = data;
-	while (entries && *entries) {
-		newtEntrySet(*entries, strdup(*ptr), 1);
-		entries++;
-		ptr++;
-	}
-}
-
-/* only supports up to 50 buttons and entries -- shucks! */
-static int mynewtWinEntries(char * title, char * text, int suggestedWidth, int flexDown, 
-			    int flexUp, int dataWidth, void (*callback_func)(char ** strings),
-			    struct newtWinEntry * items, char * button1, ...) {
-	newtComponent buttons[50], result, form, textw;
-	newtGrid grid, buttonBar, subgrid;
-	int numItems;
-	int rc, i;
-	int numButtons;
-	char * buttonName;
-	newtComponent entries[50];
-
-	va_list args;
-	
-	textw = newtTextboxReflowed(-1, -1, text, suggestedWidth, flexDown,
-				    flexUp, 0);
-	
-	for (numItems = 0; items[numItems].text; numItems++); 
-	
-	buttonName = button1, numButtons = 0;
-	va_start(args, button1);
-	while (buttonName) {
-		buttons[numButtons] = newtButton(-1, -1, buttonName);
-		numButtons++;
-		buttonName = va_arg(args, char *);
-	}
-	
-	va_end(args);
-	
-	buttonBar = newtCreateGrid(numButtons, 1);
-	for (i = 0; i < numButtons; i++) {
-		newtGridSetField(buttonBar, i, 0, NEWT_GRID_COMPONENT, 
-				 buttons[i],
-				 i ? 1 : 0, 0, 0, 0, 0, 0);
-	}
-
-	if (callback_func) {
-		callback_real_function = callback_func;
-		entries[numItems] = NULL;
-	}
-	else
-		callback_real_function = NULL;
-	
-	subgrid = newtCreateGrid(2, numItems);
-	for (i = 0; i < numItems; i++) {
-		newtComponent entr = newtEntry(-1, -1, items[i].value ? 
-					       *items[i].value : NULL, dataWidth,
-					       items[i].value, items[i].flags);
-
-		newtGridSetField(subgrid, 0, i, NEWT_GRID_COMPONENT,
-				 newtLabel(-1, -1, items[i].text),
-				 0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
-		newtGridSetField(subgrid, 1, i, NEWT_GRID_COMPONENT,
-				 entr,
-				 1, 0, 0, 0, 0, 0);
-		if (callback_func) {
-			entries[i] = entr;
-			newtComponentAddCallback(entr, default_callback, entries);
-		}
-	}
-	
-	
-	grid = newtCreateGrid(1, 3);
-	form = newtForm(NULL, 0, 0);
-	newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, textw, 
-			 0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
-	newtGridSetField(grid, 0, 1, NEWT_GRID_SUBGRID, subgrid, 
-			 0, 1, 0, 0, 0, 0);
-	newtGridSetField(grid, 0, 2, NEWT_GRID_SUBGRID, buttonBar, 
-			 0, 1, 0, 0, 0, NEWT_GRID_FLAG_GROWX);
-	newtGridAddComponentsToForm(grid, form, 1);
-	newtGridWrappedWindow(grid, title);
-	newtGridFree(grid, 1);
-	
-	result = newtRunForm(form);
-	
-	for (rc = 0; rc < numItems; rc++)
-		*items[rc].value = strdup(*items[rc].value);
-	
-	for (rc = 0; result != buttons[rc] && rc < numButtons; rc++);
-	if (rc == numButtons) 
-		rc = 0; /* F12 */
-	else 
-		rc++;
-	
-	newtFormDestroy(form);
-	newtPopWindow();
-	
-	return rc;
-}
-
-
-enum return_type ask_from_entries(char *msg, char ** questions, char *** answers, int entry_size, void (*callback_func)(char ** strings))
-{
-	struct newtWinEntry entries[50];
-	int j, i = 0;
-	int rc;
-	char ** already_answers = NULL;
-
-	while (questions && *questions) {
-		entries[i].text = *questions;
-		entries[i].flags = NEWT_FLAG_SCROLL | (!strcmp(*questions, "Password") ? NEWT_FLAG_PASSWORD : 0);
-		i++;
-		questions++;
-	}
-	entries[i].text = NULL;
-	entries[i].value = NULL;
-
-	if (*answers == NULL)
-		*answers = (char **) malloc(sizeof(char *) * i);
-	else
-		already_answers = *answers;
-
-	for (j = 0 ; j < i ; j++) {
-		entries[j].value = &((*answers)[j]);
-		if (already_answers && *already_answers) {
-			*(entries[j].value) = *already_answers;
-			already_answers++;
-		} else
-			*(entries[j].value) = NULL;
-	}
-
-	rc = mynewtWinEntries("Please fill in entries...", msg, 52, 5, 5, entry_size, callback_func, entries, "Ok", "Cancel", NULL); 
-
-	if (rc == 3)
-		return RETURN_BACK;
-	if (rc != 1)
-		return RETURN_ERROR;
-	
-	return RETURN_OK;
-}
-
-
-void suspend_to_console(void) { newtSuspend(); }
-void resume_from_suspend(void) { newtResume(); }
diff --git a/mdk-stage1/newt/Makefile b/mdk-stage1/newt/Makefile
deleted file mode 100644
index 171bcf0cb..000000000
--- a/mdk-stage1/newt/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-LIBNAME = libnewt
-
-OBJS = newt.o button.o form.o checkbox.o entry.o label.o listbox.o scrollbar.o textbox.o scale.o grid.o windows.o buttonbar.o checkboxtree.o
-
-DEFS = -DVERSION=\"0.50.19\"
-
-INCS = -I../slang
-
-
-TARGETS = $(LIBNAME).a
-
-ifeq (DIETLIBC, $(L))
-TARGETS += $(LIBNAME)-DIET.a
-endif
-
-all: $(TARGETS)
-
-clean:
-	rm -f *.o *.a
-
-OBJS-DIET = $(subst .o,-DIET.o,$(OBJS))
-
-$(LIBNAME).a: $(OBJS)
-	ar -cru $@ $^
-	ranlib $@
-
-$(LIBNAME)-DIET.a: $(OBJS-DIET)
-	ar -cru $@ $^
-	ranlib $@
-
-$(OBJS): %.o: %.c
-	gcc $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -c $< -o $@
-
-$(OBJS-DIET): %-DIET.o: %.c
-	gcc $(CFLAGS) $(DEFS) $(INCS) $(DIETLIBC_INCLUDES) -c $< -o $@
-
diff --git a/mdk-stage1/newt/button.c b/mdk-stage1/newt/button.c
deleted file mode 100644
index 1ff360dc5..000000000
--- a/mdk-stage1/newt/button.c
+++ /dev/null
@@ -1,190 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct button {
-    char * text;
-    int compact;
-};
-
-static void buttonDrawIt(newtComponent co, int active, int pushed);
-static void buttonDrawText(newtComponent co, int active, int pushed);
-
-static void buttonDraw(newtComponent c);
-static void buttonDestroy(newtComponent co);
-static struct eventResult buttonEvent(newtComponent c,
-				      struct event ev);
-static void buttonPlace(newtComponent co, int newLeft, int newTop);
-
-static struct componentOps buttonOps = {
-    buttonDraw,
-    buttonEvent,
-    buttonDestroy,
-    buttonPlace,
-    newtDefaultMappedHandler,
-} ;
-
-static newtComponent createButton(int left, int row, const char * text, int compact) {
-    newtComponent co;
-    struct button * bu;
-
-    co = malloc(sizeof(*co));
-    bu = malloc(sizeof(struct button));
-    co->data = bu;
-
-    bu->text = strdup(text);
-    bu->compact = compact;
-    co->ops = &buttonOps;
-
-    if (bu->compact) {
-	co->height = 1;
-	co->width = strlen(text) + 3;
-    } else {
-	co->height = 4;
-	co->width = strlen(text) + 5;
-    }
-
-    co->top = row;
-    co->left = left;
-    co->takesFocus = 1;
-    co->isMapped = 0;
-
-    newtGotorc(co->top, co->left);
-
-    return co;
-}
-
-newtComponent newtCompactButton(int left, int row, const char * text) {
-    return createButton(left, row, text, 1);
-}
-
-newtComponent newtButton(int left, int row, const char * text) {
-    return createButton(left, row, text, 0);
-}
-
-static void buttonDestroy(newtComponent co) {
-    struct button * bu = co->data;
-
-    free(bu->text);
-    free(bu);
-    free(co);
-}
-
-static void buttonPlace(newtComponent co, int newLeft, int newTop) {
-    co->top = newTop;
-    co->left = newLeft;
-
-    newtGotorc(co->top, co->left);
-}
-
-static void buttonDraw(newtComponent co) {
-    buttonDrawIt(co, 0, 0);
-}
-
-static void buttonDrawIt(newtComponent co, int active, int pushed) {
-    struct button * bu = co->data;
-
-    if (!co->isMapped) return;
-
-    SLsmg_set_color(NEWT_COLORSET_BUTTON);
-
-    if (bu->compact) {
-	if (active)
-	    SLsmg_set_color(NEWT_COLORSET_COMPACTBUTTON);
-	else
-	    SLsmg_set_color(NEWT_COLORSET_BUTTON);
-	newtGotorc(co->top+ pushed, co->left + 1 + pushed);
-	SLsmg_write_char('<');
-	SLsmg_write_string(bu->text);
-	SLsmg_write_char('>');
-    } else {
-	if (pushed) {
-	    SLsmg_set_color(NEWT_COLORSET_BUTTON);
-	    newtDrawBox(co->left + 1, co->top + 1, co->width - 1, 3, 0);
-
-	    SLsmg_set_color(NEWT_COLORSET_WINDOW);
-	    newtClearBox(co->left, co->top, co->width, 1);
-	    newtClearBox(co->left, co->top, 1, co->height);
-	} else {
-	    newtDrawBox(co->left, co->top, co->width - 1, 3, 1);
-	}
-
-	buttonDrawText(co, active, pushed);
-    }
-}
-
-static void buttonDrawText(newtComponent co, int active, int pushed) {
-    struct button * bu = co->data;
-
-    if (pushed) pushed = 1;
-
-    if (active)
-	SLsmg_set_color(NEWT_COLORSET_ACTBUTTON);
-    else
-	SLsmg_set_color(NEWT_COLORSET_BUTTON);
-
-    newtGotorc(co->top + 1 + pushed, co->left + 1 + pushed);
-    SLsmg_write_char(' ');
-    SLsmg_write_string(bu->text);
-    SLsmg_write_char(' ');
-}
-
-static struct eventResult buttonEvent(newtComponent co,
-				      struct event ev) {
-    struct eventResult er;
-    struct button * bu = co->data;
-
-    if (ev.when == EV_NORMAL) {
-	switch (ev.event) {
-	  case EV_FOCUS:
-	    buttonDrawIt(co, 1, 0);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case EV_UNFOCUS:
-	    buttonDrawIt(co, 0, 0);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case EV_KEYPRESS:
-	    if (ev.u.key == ' ' || ev.u.key == '\r') {
-		if (!bu->compact) {
-		    /* look pushed */
-		    buttonDrawIt(co, 1, 1);
-		    newtRefresh();
-		    newtDelay(150000);
-		    buttonDrawIt(co, 1, 0);
-		    newtRefresh();
-		    newtDelay(150000);
-		}
-
-		er.result = ER_EXITFORM;
-	    } else
-		er.result = ER_IGNORED;
-	    break;
-	  case EV_MOUSE:
-	      if (ev.u.mouse.type == MOUSE_BUTTON_DOWN &&
-		  co->top <= ev.u.mouse.y &&
-		  co->top + co->height - !bu->compact > ev.u.mouse.y &&
-		  co->left <= ev.u.mouse.x &&
-		  co->left + co->width - !bu->compact > ev.u.mouse.x) {
-		  if (!bu->compact) {
-		      buttonDrawIt(co, 1, 1);
-		      newtRefresh();
-		      newtDelay(150000);
-		      buttonDrawIt(co, 1, 0);
-		      newtRefresh();
-		      newtDelay(150000);
-		  }
-		  er.result = ER_EXITFORM;
-	      }
-	    break;
-	}
-    } else
-	er.result = ER_IGNORED;
-
-    return er;
-}
diff --git a/mdk-stage1/newt/buttonbar.c b/mdk-stage1/newt/buttonbar.c
deleted file mode 100644
index 45473c9d2..000000000
--- a/mdk-stage1/newt/buttonbar.c
+++ /dev/null
@@ -1,46 +0,0 @@
-#include <stdarg.h>
-
-#include "newt.h"
-
-/* if they try and pack more then 50 buttons, screw 'em */
-newtGrid newtButtonBarv(char * button1, newtComponent * b1comp, va_list args) {
-    newtGrid grid;
-    struct buttonInfo {
-	char * name;
-	newtComponent * compPtr;
-    } buttons[50];
-    int num;
-    int i;
-
-    buttons[0].name = button1, buttons[0].compPtr = b1comp, num = 1;
-    while (1) {
-	buttons[num].name = va_arg(args, char *);
-	if (!buttons[num].name) break;
-	buttons[num].compPtr = va_arg(args, newtComponent *);
-	num++;
-    }
-
-    grid = newtCreateGrid(num, 1);
-
-    for (i = 0; i < num; i++) {
-	*buttons[i].compPtr = newtButton(-1, -1, buttons[i].name);
-	newtGridSetField(grid, i, 0, NEWT_GRID_COMPONENT, 
-			 *buttons[i].compPtr,
-			 num ? 1 : 0, 0, 0, 0, 0, 0);
-    }
-
-    return grid;
-}
-
-newtGrid newtButtonBar(char * button1, newtComponent * b1comp, ...) {
-    va_list args;
-    newtGrid grid;
-
-    va_start(args, b1comp);
-
-    grid = newtButtonBarv(button1, b1comp, args);
-
-    va_end(args);
- 
-    return grid;
-}
diff --git a/mdk-stage1/newt/checkbox.c b/mdk-stage1/newt/checkbox.c
deleted file mode 100644
index eee514c98..000000000
--- a/mdk-stage1/newt/checkbox.c
+++ /dev/null
@@ -1,290 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-enum type { CHECK, RADIO };
-
-struct checkbox {
-    char * text;
-    char * seq;
-    char * result;
-    newtComponent prevButton, lastButton;
-    enum type type;
-    char value;
-    int active, inactive;
-    const void * data;
-    int flags;
-    int hasFocus;
-};
-
-static void makeActive(newtComponent co);
-
-static void cbDraw(newtComponent c);
-static void cbDestroy(newtComponent co);
-struct eventResult cbEvent(newtComponent co, struct event ev);
-
-static struct componentOps cbOps = {
-    cbDraw,
-    cbEvent,
-    cbDestroy,
-    newtDefaultPlaceHandler,
-    newtDefaultMappedHandler,
-} ;
-
-newtComponent newtRadiobutton(int left, int top, const char * text, int isDefault,
-			      newtComponent prevButton) {
-    newtComponent co;
-    newtComponent curr;
-    struct checkbox * rb;
-    char initialValue;
-
-    if (isDefault)
-	initialValue = '*';
-    else
-	initialValue = ' ';
-
-    co = newtCheckbox(left, top, text, initialValue, " *", NULL);
-    rb = co->data;
-    rb->type = RADIO;
-
-    rb->prevButton = prevButton;
-
-    for (curr = co; curr; curr = rb->prevButton) {
-	rb = curr->data;
-	rb->lastButton = co;
-    }
-
-    return co;
-}
-
-newtComponent newtRadioGetCurrent(newtComponent setMember) {
-    struct checkbox * rb = setMember->data;
-
-    setMember = rb->lastButton;
-    rb = setMember->data;
-
-    while (rb && rb->value != '*') {
-	setMember = rb->prevButton;
-	if (!setMember)
-	  return NULL;
-	rb = setMember->data;
-    }
-
-    return setMember;
-}
-
-char newtCheckboxGetValue(newtComponent co) {
-    struct checkbox * cb = co->data;
-
-    return cb->value;
-}
-
-void newtCheckboxSetValue(newtComponent co, char value) {
-    struct checkbox * cb = co->data;
-
-    *cb->result = value;
-    cbDraw(co);
-}
-
-newtComponent newtCheckbox(int left, int top, const char * text, char defValue,
-			   const char * seq, char * result) {
-    newtComponent co;
-    struct checkbox * cb;
-
-    if (!seq) seq = " *";
-
-    co = malloc(sizeof(*co));
-    cb = malloc(sizeof(struct checkbox));
-    co->data = cb;
-    cb->flags = 0;
-    if (result)
-	cb->result = result;
-    else
-	cb->result = &cb->value;
-
-    cb->text = strdup(text);
-    cb->seq = strdup(seq);
-    cb->type = CHECK;
-    cb->hasFocus = 0;
-    cb->inactive = COLORSET_CHECKBOX;
-    cb->active = COLORSET_ACTCHECKBOX;
-    defValue ? (*cb->result = defValue) : (*cb->result = cb->seq[0]);
-
-    co->ops = &cbOps;
-
-    co->callback = NULL;
-    co->height = 1;
-    co->width = strlen(text) + 4;
-    co->top = top;
-    co->left = left;
-    co->takesFocus = 1;
-
-    return co;
-}
-
-void newtCheckboxSetFlags(newtComponent co, int flags, enum newtFlagsSense sense) {
-    struct checkbox * cb = co->data;
-    int row, col;
-
-    cb->flags = newtSetFlags(cb->flags, flags, sense);
-
-    if (!(cb->flags & NEWT_FLAG_DISABLED))
-	co->takesFocus = 1;
-    else
-	co->takesFocus = 0;
-
-    newtGetrc(&row, &col);
-    cbDraw(co);
-    newtGotorc(row, col);
-}
-
-static void cbDraw(newtComponent c) {
-    struct checkbox * cb = c->data;
-
-    if (c->top == -1 || !c->isMapped) return;
-
-    if (cb->flags & NEWT_FLAG_DISABLED) {
-	cb->inactive = NEWT_COLORSET_DISENTRY;
-	cb->active = NEWT_COLORSET_DISENTRY;
-    } else {
-	cb->inactive = COLORSET_CHECKBOX;
-	cb->active = COLORSET_ACTCHECKBOX;
-    }
-
-    SLsmg_set_color(cb->inactive);
-
-    newtGotorc(c->top, c->left);
-
-    switch (cb->type) {
-      case RADIO:
-	SLsmg_write_string("( ) ");
-	break;
-
-      case CHECK:
-	SLsmg_write_string("[ ] ");
-	break;
-
-      default:
-	break;
-    }
-
-    SLsmg_write_string(cb->text);
-
-    if (cb->hasFocus)
-	SLsmg_set_color(cb->active);
-
-    newtGotorc(c->top, c->left + 1);
-    SLsmg_write_char(*cb->result);
-}
-
-static void cbDestroy(newtComponent co) {
-    struct checkbox * cb = co->data;
-
-    free(cb->text);
-    free(cb->seq);
-    free(cb);
-    free(co);
-}
-
-struct eventResult cbEvent(newtComponent co, struct event ev) {
-    struct checkbox * cb = co->data;
-    struct eventResult er;
-    const char * cur;
-
-    if (ev.when == EV_NORMAL) {
-	switch (ev.event) {
-	  case EV_FOCUS:
-	    cb->hasFocus = 1;
-	    cbDraw(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case EV_UNFOCUS:
-	    cb->hasFocus = 0;
-	    cbDraw(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case EV_KEYPRESS:
-	    if (ev.u.key == ' ') {
-		if (cb->type == RADIO) {
-		    makeActive(co);
-		} else if (cb->type == CHECK) {
-		    cur = strchr(cb->seq, *cb->result);
-		    if (!cur)
-			*cb->result = *cb->seq;
-		    else {
-			cur++;
-			if (! *cur)
-			    *cb->result = *cb->seq;
-			else
-			    *cb->result = *cur;
-		    }
-		    cbDraw(co);
-		    er.result = ER_SWALLOWED;
-
-		    if (co->callback)
-			co->callback(co, co->callbackData);
-		} else {
-		    er.result = ER_IGNORED;
-		}
-	    } else if(ev.u.key == NEWT_KEY_ENTER) {
-		er.result = ER_IGNORED;
-	    } else {
-		er.result = ER_IGNORED;
-	    }
-	    break;
-   	  case EV_MOUSE:
-	    if (ev.u.mouse.type == MOUSE_BUTTON_DOWN) {
-		if (cb->type == RADIO) {
-		    makeActive(co);
-		} else if (cb->type == CHECK) {
-		    cur = strchr(cb->seq, *cb->result);
-		    if (!cur)
-			*cb->result = *cb->seq;
-		    else {
-			cur++;
-			if (! *cur)
-			    *cb->result = *cb->seq;
-			else
-			    *cb->result = *cur;
-		    }
-		    cbDraw(co);
-		    er.result = ER_SWALLOWED;
-
-		    if (co->callback)
-			co->callback(co, co->callbackData);
-		}
-	    }
-	}
-    } else
-	er.result = ER_IGNORED;
-
-    return er;
-}
-
-static void makeActive(newtComponent co) {
-    struct checkbox * cb = co->data;
-    struct checkbox * rb;
-    newtComponent curr;
-
-    /* find the one that's turned off */
-    curr = cb->lastButton;
-    rb = curr->data;
-    while (curr && rb->value == rb->seq[0]) {
-	curr = rb->prevButton;
-	if (curr) rb = curr->data;
-    }
-    if (curr) {
-	rb->value = rb->seq[0];
-	cbDraw(curr);
-    }
-    cb->value = cb->seq[1];
-    cbDraw(co);
-
-    if (co->callback)
-	co->callback(co, co->callbackData);
-}
diff --git a/mdk-stage1/newt/checkboxtree.c b/mdk-stage1/newt/checkboxtree.c
deleted file mode 100644
index 00113f23e..000000000
--- a/mdk-stage1/newt/checkboxtree.c
+++ /dev/null
@@ -1,714 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct items {
-    char * text;
-    const void *data;
-    unsigned char selected;
-    struct items *next;
-    struct items *prev;
-    struct items *branch;
-    int flags;
-    int depth;
-};
-
-struct CheckboxTree {
-    newtComponent sb;
-    int curWidth;	/* size of text w/o scrollbar or border*/
-    int curHeight;	/* size of text w/o border */
-    struct items * itemlist;
-    struct items ** flatList, ** currItem, ** firstItem;
-    int flatCount;
-    int flags;
-    int pad;
-    char * seq;
-    char * result;
-};
-
-static void ctDraw(newtComponent c);
-static void ctDestroy(newtComponent co);
-static void ctPlace(newtComponent co, int newLeft, int newTop);
-struct eventResult ctEvent(newtComponent co, struct event ev);
-static void ctMapped(newtComponent co, int isMapped);
-static struct items * findItem(struct items * items, const void * data);
-static void buildFlatList(newtComponent co);
-static void doBuildFlatList(struct CheckboxTree * ct, struct items * item);
-enum countWhat { COUNT_EXPOSED=0, COUNT_SELECTED=1 };
-static int countItems(struct items * item, enum countWhat justExposed);
-
-static struct componentOps ctOps = {
-    ctDraw,
-    ctEvent,
-    ctDestroy,
-    ctPlace,
-    ctMapped,
-} ;
-
-static int countItems(struct items * item, enum countWhat what) {
-    int count = 0;
-
-    while (item) {
-        if ((!item->branch && item->selected == what) || (what == COUNT_EXPOSED))
-	    count++;
-	if (item->branch || (what == COUNT_EXPOSED && item->selected))
-	    count += countItems(item->branch, what);
-	item = item->next;
-    }
-
-    return count;
-}
-
-static void doBuildFlatList(struct CheckboxTree * ct, struct items * item) {
-    while (item) {
-    	ct->flatList[ct->flatCount++] = item;
-	if (item->branch && item->selected) doBuildFlatList(ct, item->branch);
-	item = item->next;
-    }
-}
-
-static void buildFlatList(newtComponent co) {
-    struct CheckboxTree * ct = co->data;
-
-    if (ct->flatList) free(ct->flatList);
-    ct->flatCount = countItems(ct->itemlist, COUNT_EXPOSED);
-
-    ct->flatList = malloc(sizeof(*ct->flatList) * (ct->flatCount+1));
-    ct->flatCount = 0;
-    doBuildFlatList(ct, ct->itemlist);
-    ct->flatList[ct->flatCount] = NULL;
-}
-
-int newtCheckboxTreeAddItem(newtComponent co, 
-			    const char * text, const void * data,
-			    int flags, int index, ...) {
-    va_list argList;
-    int numIndexes;
-    int * indexes;
-    int i;
-
-    va_start(argList, index);
-    numIndexes = 0;
-    i = index;
-    while (i != NEWT_ARG_LAST) {
-	numIndexes++;
-	i = va_arg(argList, int);
-    }
-
-    va_end(argList);
-
-    indexes = alloca(sizeof(*indexes) * (numIndexes + 1));
-    va_start(argList, index);
-    numIndexes = 0;
-    i = index;
-    va_start(argList, index);
-    while (i != NEWT_ARG_LAST) {
-	indexes[numIndexes++] = i;
-	i = va_arg(argList, int);
-    }
-    va_end(argList);
-
-    indexes[numIndexes++] = NEWT_ARG_LAST;
-
-    return newtCheckboxTreeAddArray(co, text, data, flags, indexes);
-}
-
-static int doFindItemPath(struct items * items, void * data, int * path, 
-			  int * len) {
-    int where = 0;
-
-    while (items) {
-	if (items->data == data) {
-	    if (path) path[items->depth] = where;
-	    if (len) *len = items->depth + 1;
-	    return 1;
-	}
-
-	if (items->branch && doFindItemPath(items->branch, data, path, len)) {
-	    if (path) path[items->depth] = where;
-	    return 1;
-	}
-
-	items = items->next;
-	where++;
-    }
-
-    return 0;
-}
-
-int * newtCheckboxTreeFindItem(newtComponent co, void * data) {
-    int len;
-    int * path;
-    struct CheckboxTree * ct = co->data;
-
-    if (!doFindItemPath(ct->itemlist, data, NULL, &len)) return NULL;
-
-    path = malloc(sizeof(*path) * (len + 1));
-    doFindItemPath(ct->itemlist, data, path, NULL);
-    path[len] = NEWT_ARG_LAST;
-
-    return path;
-}
-
-int newtCheckboxTreeAddArray(newtComponent co, 
-			    const char * text, const void * data,
-			    int flags, int * indexes) {
-    struct items * curList, * newNode, * item = NULL;
-    struct items ** listPtr = NULL;
-    int i, index, numIndexes;
-    struct CheckboxTree * ct = co->data;
-
-    numIndexes = 0;
-    while (indexes[numIndexes] != NEWT_ARG_LAST) numIndexes++;
-
-    if (!ct->itemlist) {
-	if (numIndexes > 1) return -1;
-
-    	ct->itemlist = malloc(sizeof(*ct->itemlist));
-    	item = ct->itemlist;
-	item->prev = NULL;
-	item->next = NULL;
-    } else {
-	curList = ct->itemlist;
-	listPtr = &ct->itemlist;
-
-	i = 0;
-	index = indexes[i];
-	while (i < numIndexes) {
-	    item = curList;
-
-	    if (index == NEWT_ARG_APPEND) {
-	    	item = NULL;
-	    } else {
-		while (index && item) 
-		    item = item->next, index--;
-	    }
-
-	    i++;
-	    if (i < numIndexes) {
-		curList = item->branch;
-		listPtr = &item->branch;
-		if (!curList && (i + 1 != numIndexes)) return -1;
-
-		index = indexes[i];
-	    }
-	}
-
-	if (!curList) { 			/* create a new branch */
-	    item = malloc(sizeof(*curList->prev));
-	    item->next = item->prev = NULL;
-	    *listPtr = item;
-	} else if (!item) {			/* append to end */
-	    item = curList;
-	    while (item->next) item = item->next;
-	    item->next = malloc(sizeof(*curList->prev));
-	    item->next->prev = item;
-	    item = item->next;
-	    item->next = NULL;
-	} else { 
-	    newNode = malloc(sizeof(*newNode));
-	    newNode->prev = item->prev;
-	    newNode->next = item;
-
-	    if (item->prev) item->prev->next = newNode;
-	    item->prev = newNode;
-	    item = newNode;
-	    if (!item->prev) *listPtr = item;
-	}
-    }
-    	
-    item->text = strdup(text);
-    item->data = data;
-    if (flags & NEWT_FLAG_SELECTED) {
-    	item->selected = 1;
-    } else {
-	item->selected = 0;
-    }
-    item->flags = flags;
-    item->branch = NULL;
-    item->depth = numIndexes - 1;
-
-    i = 4 + (3 * item->depth);
-
-    if ((strlen(text) + i + ct->pad) > (size_t)co->width) {
-	co->width = strlen(text) + i + ct->pad;
-    }
-
-    return 0;
-}
-
-static struct items * findItem(struct items * items, const void * data) {
-    struct items * i;
-
-    while (items) {
-	if (items->data == data) return items;
-    	if (items->branch) {
-	    i = findItem(items->branch, data);
-	    if (i) return i;
-	}
-
-	items = items->next;
-    }
-
-    return NULL;
-}
-
-static void listSelected(struct items * items, int * num, const void ** list, int seqindex) {
-    while (items) {
-	    if ((seqindex ? items->selected==seqindex : items->selected) && !items->branch)
-	    list[(*num)++] = (void *) items->data;
-	if (items->branch)
-	    listSelected(items->branch, num, list, seqindex);
-	items = items->next;
-    }
-}
-
-const void ** newtCheckboxTreeGetSelection(newtComponent co, int *numitems)
-{
-    return newtCheckboxTreeGetMultiSelection(co, numitems, 0);
-}
-
-const void ** newtCheckboxTreeGetMultiSelection(newtComponent co, int *numitems, char seqnum)
-{
-    struct CheckboxTree * ct;
-    const void **retval;
-    int seqindex=0;
-
-    if(!co || !numitems) return NULL;
-
-    ct = co->data;
-	
-    if (seqnum) {
-	    while( ct->seq[seqindex] && ( ct->seq[seqindex] != seqnum )) seqindex++;
-    } else {
-	    seqindex = 0;
-    }
-
-    *numitems = countItems(ct->itemlist, (seqindex ? seqindex : COUNT_SELECTED));
-    if (!*numitems) return NULL;
-    
-    retval = malloc(*numitems * sizeof(void *));
-    *numitems = 0;
-    listSelected(ct->itemlist, numitems, retval, seqindex);
-
-    return retval;
-}
-
-newtComponent newtCheckboxTree(int left, int top, int height, int flags) {
-	return newtCheckboxTreeMulti(left, top, height, NULL, flags);
-}
-
-newtComponent newtCheckboxTreeMulti(int left, int top, int height, char *seq, int flags) {
-    newtComponent co;
-    struct CheckboxTree * ct;
-
-    co = malloc(sizeof(*co));
-    ct = malloc(sizeof(struct CheckboxTree));
-    co->callback = NULL;
-    co->data = ct;
-    co->ops = &ctOps;
-    co->takesFocus = 1;
-    co->height = height;
-    co->width = 0;
-    co->isMapped = 0;
-    ct->itemlist = NULL;
-    ct->firstItem = NULL;
-    ct->currItem = NULL;
-    ct->flatList = NULL;
-	if (seq)
-	  ct->seq = strdup(seq);
-	else
-	  ct->seq = strdup(" *");
-    if (flags & NEWT_FLAG_SCROLL) {
-	ct->sb = newtVerticalScrollbar(left, top, height,
-				       COLORSET_LISTBOX, COLORSET_ACTLISTBOX);
-	ct->pad = 2;
-    } else {
-	ct->sb = NULL;
-	ct->pad = 0;
-    }
-    
-    return co;
-}
-
-static void ctMapped(newtComponent co, int isMapped) {
-    struct CheckboxTree * ct = co->data;
-
-    co->isMapped = isMapped;
-    if (ct->sb)
-	ct->sb->ops->mapped(ct->sb, isMapped);
-}
-
-static void ctPlace(newtComponent co, int newLeft, int newTop) {
-    struct CheckboxTree * ct = co->data;
-
-    co->top = newTop;
-    co->left = newLeft;
-
-    if (ct->sb)
-	ct->sb->ops->place(ct->sb, co->left + co->width - 1, co->top);
-}
-
-int ctSetItem(newtComponent co, struct items *item, enum newtFlagsSense sense)
-{
-    struct CheckboxTree * ct = co->data;
-    struct items * currItem;
-    struct items * firstItem;
-    
-    if (!item)
-	return 1;
-    
-    switch(sense) {
-	case NEWT_FLAGS_RESET:
-	    item->selected = 0;
-	    break;
-	case NEWT_FLAGS_SET:
-	    item->selected = 1;
-	    break;
-	case NEWT_FLAGS_TOGGLE:
-	    if (item->branch)
-	      item->selected = !item->selected;
-	    else {
-		    item->selected++;
-		    if (item->selected==strlen(ct->seq))
-		      item->selected = 0;
-	    }
-	    break;
-    }
-
-    if (item->branch) {
-    	currItem = *ct->currItem;
-	firstItem = *ct->firstItem;
-
-    	buildFlatList(co);
-
-    	ct->currItem = ct->flatList;
-	while (*ct->currItem != currItem) ct->currItem++;
-
-    	ct->firstItem = ct->flatList;
-    	if (ct->flatCount > co->height) {
-		struct items ** last = ct->flatList + ct->flatCount - co->height;
-		while (*ct->firstItem != firstItem && ct->firstItem != last)
-		    ct->firstItem++;
-	}
-    }
-
-    return 0;
-}
-
-static void ctSetItems(struct items *item, int selected)
-{
-    for (; item; item = item->next) {
-	if (!item->branch)
-	    item->selected = selected;
-	else
-	    ctSetItems(item->branch, selected);
-    }
-}
-
-static void ctDraw(newtComponent co) {
-    struct CheckboxTree * ct = co->data;
-    struct items ** item; 
-    int i, j;
-    char * spaces = NULL;
-    int currRow = -1;
-
-    if (!co->isMapped) return ;
-
-    if (!ct->firstItem) {
-	buildFlatList(co);
-	ct->firstItem = ct->currItem = ct->flatList;
-    }
-
-    item = ct->firstItem;
-    
-    i = 0;
-    while (*item && i < co->height) {
-	newtGotorc(co->top + i, co->left);
-	if (*item == *ct->currItem) {
-	    SLsmg_set_color(NEWT_COLORSET_ACTLISTBOX);
-	    currRow = co->top + i;
-	} else
-	    SLsmg_set_color(NEWT_COLORSET_LISTBOX);
-
-	for (j = 0; j < (*item)->depth; j++)
-	    SLsmg_write_string("   ");
-
-	if ((*item)->branch) {
-	    if ((*item)->selected) 
-		SLsmg_write_string("<-> ");
-	    else
-		SLsmg_write_string("<+> ");
-	} else {
-	    char tmp[5];
-	    snprintf(tmp,5,"[%c] ",ct->seq[(*item)->selected]);
-	    SLsmg_write_string(tmp);
-	}
-
-	SLsmg_write_nstring((*item)->text, co->width - 4 - 
-					   (3 * (*item)->depth));
-	item++;
-	i++;
-    }
-
-    /* There could be empty lines left (i.e. if the user closes an expanded
-       list which is the last thing in the tree, and whose elements are
-       displayed at the bottom of the screen */
-    if (i < co->height) {
-	spaces = alloca(co->width);
-	memset(spaces, ' ', co->width);
-	SLsmg_set_color(NEWT_COLORSET_LISTBOX);
-    }
-    while (i < co->height) {
-	newtGotorc(co->top + i, co->left);
-	SLsmg_write_nstring(spaces, co->width);
-	i++;
-    }
-    
-    if(ct->sb) {
-	newtScrollbarSet(ct->sb, ct->currItem - ct->flatList, 
-			 ct->flatCount - 1);
-	ct->sb->ops->draw(ct->sb);
-    }
-
-    newtGotorc(currRow, co->left + 1);
-}
-
-static void ctDestroy(newtComponent co) {
-    struct CheckboxTree * ct = co->data;
-    struct items * item, * nextitem;
-
-    nextitem = item = ct->itemlist;
-
-    while (item != NULL) {
-	nextitem = item->next;
-	free(item->text);
-	free(item);
-	item = nextitem;
-    }
-
-    free(ct->seq);
-    free(ct);
-    free(co);
-}
-
-struct eventResult ctEvent(newtComponent co, struct event ev) {
-    struct CheckboxTree * ct = co->data;
-    struct eventResult er;
-    struct items ** listEnd, ** lastItem;
-    int key, selnum = 1;
-
-    er.result = ER_IGNORED;
-
-    if(ev.when == EV_EARLY || ev.when == EV_LATE) {
-	return er;
-    }
-
-    switch(ev.event) {
-    case EV_KEYPRESS:
-	key = ev.u.key;
-	if (key == (char) key && key != ' ') {
-	    for (selnum = 0; ct->seq[selnum]; selnum++)
-	    if (key == ct->seq[selnum])
-		break;
-	    if (!ct->seq[selnum])
-		switch (key) {
-		case '-': selnum = 0; break;
-		case '+':
-		case '*': selnum = 1; break;
-		}
-	    if (ct->seq[selnum])
-		key = '*';
-	}
-	switch(key) {
-	case ' ':
-	case NEWT_KEY_ENTER:
-	    ctSetItem(co, *ct->currItem, NEWT_FLAGS_TOGGLE);
-	    er.result = ER_SWALLOWED;
-	    if (!(*ct->currItem)->branch || (*ct->currItem)->selected)
-		key = NEWT_KEY_DOWN;
-	    else
-		key = '*';
-	    break;
-	case '*':
-	    if ((*ct->currItem)->branch) {
-		ctSetItems((*ct->currItem)->branch, selnum);
-		if (!(*ct->currItem)->selected)
-		    key = NEWT_KEY_DOWN;
-	    } else {
-		(*ct->currItem)->selected = selnum;
-		key = NEWT_KEY_DOWN;
-	    }
-	    er.result = ER_SWALLOWED;
-	    break;
-	}
-	switch (key) {
-	case '*':
-	    ctDraw(co);
-	    if(co->callback) co->callback(co, co->callbackData);
-	    return er;
-	case NEWT_KEY_HOME:
-	    ct->currItem = ct->flatList;
-	    ct->firstItem = ct->flatList;
-	    ctDraw(co);
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    return er;
-	case NEWT_KEY_END:
-	    ct->currItem = ct->flatList + ct->flatCount - 1;
-	    if (ct->flatCount <= co->height)
-		ct->firstItem = ct->flatList;
-	    else
-		ct->firstItem = ct->flatList + ct->flatCount - co->height;
-	    ctDraw(co);
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    return er;
-	case NEWT_KEY_DOWN:
-	    if (ev.u.key != NEWT_KEY_DOWN) {
-		if(co->callback) co->callback(co, co->callbackData);
-		if (strlen(ct->seq) != 2) {
-		    ctDraw(co);
-		    return er;
-		}
-	    }
-	    if ((ct->currItem - ct->flatList + 1) < ct->flatCount) {
-		ct->currItem++;
-
-		if (ct->currItem - ct->firstItem >= co->height) 
-		    ct->firstItem++;
-
-		ctDraw(co);
-	    } else if (ev.u.key != NEWT_KEY_DOWN)
-	        ctDraw(co);
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    return er;
-	case NEWT_KEY_UP:
-	    if (ct->currItem != ct->flatList) {
-		ct->currItem--;
-
-		if (ct->currItem < ct->firstItem)
-		    ct->firstItem = ct->currItem;
-		    
-		ctDraw(co);
-	    }
-	    er.result = ER_SWALLOWED;
-	    if(co->callback) co->callback(co, co->callbackData);
-	    return er;
-	case NEWT_KEY_PGUP:
-	    if (ct->firstItem - co->height < ct->flatList) {
-	    	ct->firstItem = ct->currItem = ct->flatList;
-	    } else {
-		ct->currItem -= co->height;
-		ct->firstItem -= co->height;
-	    }
-
-	    ctDraw(co);
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    return er;
-	case NEWT_KEY_PGDN:
-	    listEnd = ct->flatList + ct->flatCount - 1;
-	    lastItem = ct->firstItem + co->height - 1;
-
-	    if (lastItem + co->height > listEnd) {
-	    	ct->firstItem = listEnd - co->height + 1;
-		ct->currItem = listEnd;
-	    } else {
-	    	ct->currItem += co->height;
-		ct->firstItem += co->height;
-	    }
-
-	    ctDraw(co);
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    return er;
-	}
-	break;
-
-    case EV_FOCUS:
-	ctDraw(co);
-	er.result = ER_SWALLOWED;
-	break;
-	
-    case EV_UNFOCUS:
-	ctDraw(co);
-	er.result = ER_SWALLOWED;
-	break;
-    default:
-	break;
-    }
-
-    return er;
-}
-
-const void * newtCheckboxTreeGetCurrent(newtComponent co) {
-    struct CheckboxTree * ct = co->data;
-
-    if (!ct->currItem) return NULL;
-    return (*ct->currItem)->data;
-}
-
-void newtCheckboxTreeSetEntry(newtComponent co, const void * data, const char * text)
-{
-    struct CheckboxTree * ct;
-    struct items * item;
-    int i;
-
-    if (!co) return;
-    ct = co->data;
-    item = findItem(ct->itemlist, data);
-    if (!item) return;
-
-    free(item->text);
-    item->text = strdup(text);
-
-    i = 4 + (3 * item->depth);
-
-    if ((strlen(text) + i + ct->pad) > (size_t)co->width) {
-	co->width = strlen(text) + i + ct->pad;
-    }
-
-    ctDraw(co);
-}
-
-char newtCheckboxTreeGetEntryValue(newtComponent co, const void * data)
-{
-    struct CheckboxTree * ct;
-    struct items * item;
-
-    if (!co) return -1;
-    ct = co->data;
-    item = findItem(ct->itemlist, data);
-    if (!item) return -1;
-    if (item->branch)
-	return item->selected ? NEWT_CHECKBOXTREE_EXPANDED : NEWT_CHECKBOXTREE_COLLAPSED;
-    else
-	return ct->seq[item->selected];
-}
-
-void newtCheckboxTreeSetEntryValue(newtComponent co, const void * data, char value)
-{
-    struct CheckboxTree * ct;
-    struct items * item;
-    int i;
-
-    if (!co) return;
-    ct = co->data;
-    item = findItem(ct->itemlist, data);
-    if (!item || item->branch) return;
-
-    for(i = 0; ct->seq[i]; i++)
-	if (value == ct->seq[i])
-	    break;
-
-    if (!ct->seq[i]) return;
-    item->selected = i;
-
-    ctDraw(co);
-}
-
diff --git a/mdk-stage1/newt/entry.c b/mdk-stage1/newt/entry.c
deleted file mode 100644
index 1b33f1c6f..000000000
--- a/mdk-stage1/newt/entry.c
+++ /dev/null
@@ -1,376 +0,0 @@
-#include <ctype.h>
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct entry {
-    int flags;
-    char * buf;
-    char ** resultPtr;
-    int bufAlloced;
-    int bufUsed;		/* amount of the buffer that's been used */
-    int cursorPosition; 	/* cursor *in the string* on on screen */
-    int firstChar;		/* first character position being shown */
-    newtEntryFilter filter;
-    void * filterData;
-};
-
-static void entryDraw(newtComponent co);
-static void entryDestroy(newtComponent co);
-static struct eventResult entryEvent(newtComponent co,
-			             struct event ev);
-
-static struct eventResult entryHandleKey(newtComponent co, int key);
-
-static struct componentOps entryOps = {
-    entryDraw,
-    entryEvent,
-    entryDestroy,
-    newtDefaultPlaceHandler,
-    newtDefaultMappedHandler,
-} ;
-
-void newtEntrySet(newtComponent co, const char * value, int cursorAtEnd) {
-    struct entry * en = co->data;
-
-    if ((strlen(value) + 1) > (unsigned int)en->bufAlloced) {
-	free(en->buf);
-	en->bufAlloced = strlen(value) + 1;
-	en->buf = malloc(en->bufAlloced);
-	if (en->resultPtr) *en->resultPtr = en->buf;
-    }
-    memset(en->buf, 0, en->bufAlloced);		/* clear the buffer */
-    strcpy(en->buf, value);
-    en->bufUsed = strlen(value);
-    en->firstChar = 0;
-    if (cursorAtEnd)
-	en->cursorPosition = en->bufUsed;
-    else
-	en->cursorPosition = 0;
-
-    entryDraw(co);
-} ;
-
-newtComponent newtEntry(int left, int top, const char * initialValue, int width,
-			char ** resultPtr, int flags) {
-    newtComponent co;
-    struct entry * en;
-
-    co = malloc(sizeof(*co));
-    en = malloc(sizeof(struct entry));
-    co->data = en;
-
-    co->top = top;
-    co->left = left;
-    co->height = 1;
-    co->width = width;
-    co->isMapped = 0;
-    co->callback = NULL;
-
-    co->ops = &entryOps;
-
-    en->flags = flags;
-    en->cursorPosition = 0;
-    en->firstChar = 0;
-    en->bufUsed = 0;
-    en->bufAlloced = width + 1;
-    en->filter = NULL;
-
-    if (!(en->flags & NEWT_FLAG_DISABLED))
-	co->takesFocus = 1;
-    else
-	co->takesFocus = 0;
-
-    if (initialValue && strlen(initialValue) > (unsigned int)width) {
-	en->bufAlloced = strlen(initialValue) + 1;
-    }
-    en->buf = malloc(en->bufAlloced);
-    en->resultPtr = resultPtr;
-    if (en->resultPtr) *en->resultPtr = en->buf;
-
-    memset(en->buf, 0, en->bufAlloced);
-    if (initialValue) {
-	strcpy(en->buf, initialValue);
-	en->bufUsed = strlen(initialValue);
-	en->cursorPosition = en->bufUsed;
-    } else {
-	*en->buf = '\0';
-	en->bufUsed = 0;
-	en->cursorPosition = 0;
-    }
-
-    return co;
-}
-
-static void entryDraw(newtComponent co) {
-    struct entry * en = co->data;
-    int i;
-    char * chptr;
-    int len;
-
-    if (!co->isMapped) return;
-
-    if (en->flags & NEWT_FLAG_DISABLED)
-	SLsmg_set_color(NEWT_COLORSET_DISENTRY);
-    else
-	SLsmg_set_color(NEWT_COLORSET_ENTRY);
-
-    if (en->flags & NEWT_FLAG_HIDDEN) {
-	newtGotorc(co->top, co->left);
-	for (i = 0; i < co->width; i++)
-	    SLsmg_write_char('_');
-	newtGotorc(co->top, co->left);
-
-	return;
-    }
-
-    newtGotorc(co->top, co->left);
-
-    if (en->cursorPosition < en->firstChar) {
-	/* scroll to the left */
-	en->firstChar = en->cursorPosition;
-    } else if ((en->firstChar + co->width) <= en->cursorPosition) {
-	/* scroll to the right */
-	en->firstChar = en->cursorPosition - co->width + 1;
-    }
-
-    chptr = en->buf + en->firstChar;
-
-    if (en->flags & NEWT_FLAG_PASSWORD) {
-	char *tmpptr, *p;
-
-	tmpptr = alloca(strlen(chptr+2));
-	strcpy(tmpptr, chptr);
-	for (p = tmpptr; *p; p++)
-	    *p = '*';
-	chptr = tmpptr;
-    }			
-
-    len = strlen(chptr);
-
-    if (len <= co->width) {
-	i = len;
-	SLsmg_write_string(chptr);
-	while (i < co->width) {
-	    SLsmg_write_char('_');
-	    i++;
-	}
-    } else {
-	SLsmg_write_nstring(chptr, co->width);
-    }
-
-    if (en->flags & NEWT_FLAG_HIDDEN)
-	newtGotorc(co->top, co->left);
-    else
-	newtGotorc(co->top, co->left + (en->cursorPosition - en->firstChar));
-}
-
-void newtEntrySetFlags(newtComponent co, int flags, enum newtFlagsSense sense) {
-    struct entry * en = co->data;
-    int row, col;
-
-    en->flags = newtSetFlags(en->flags, flags, sense);
-
-    if (!(en->flags & NEWT_FLAG_DISABLED))
-	co->takesFocus = 1;
-    else
-	co->takesFocus = 0;
-
-    newtGetrc(&row, &col);
-    entryDraw(co);
-    newtGotorc(row, col);
-}
-
-static void entryDestroy(newtComponent co) {
-    struct entry * en = co->data;
-
-    free(en->buf);
-    free(en);
-    free(co);
-}
-
-static struct eventResult entryEvent(newtComponent co,
-				     struct event ev) {
-    struct entry * en = co->data;
-    struct eventResult er;
-    int ch;
-
-    if (ev.when == EV_NORMAL) {
-	switch (ev.event) {
-	case EV_FOCUS:
-	    newtCursorOn();
-	    if (en->flags & NEWT_FLAG_HIDDEN)
-		newtGotorc(co->top, co->left);
-	    else
-		newtGotorc(co->top, co->left +
-			   (en->cursorPosition - en->firstChar));
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	case EV_UNFOCUS:
-	    newtCursorOff();
-	    newtGotorc(0, 0);
-	    er.result = ER_SWALLOWED;
-	    if (co->callback)
-		co->callback(co, co->callbackData);
-	    break;
-
-	case EV_KEYPRESS:
-	    ch = ev.u.key;
-	    if (en->filter)
-		ch = en->filter(co, en->filterData, ch, en->cursorPosition);
-	    if (ch) er = entryHandleKey(co, ch);
-	    break;
-
-	case EV_MOUSE:
-	    if ((ev.u.mouse.type == MOUSE_BUTTON_DOWN) &&
-		(en->flags ^ NEWT_FLAG_HIDDEN)) {
-		if (strlen(en->buf) >= (size_t) (ev.u.mouse.x - co->left)) {
-		    en->cursorPosition = ev.u.mouse.x - co->left;
-		    newtGotorc(co->top,
-			       co->left +(en->cursorPosition - en->firstChar));
-		} else {
-		    en->cursorPosition = strlen(en->buf);
-		    newtGotorc(co->top,
-			       co->left +(en->cursorPosition - en->firstChar));
-		}
-	    }
-	    break;
-	}
-    } else
-	er.result = ER_IGNORED;
-
-    return er;
-}
-
-static struct eventResult entryHandleKey(newtComponent co, int key) {
-    struct entry * en = co->data;
-    struct eventResult er;
-    char * chptr, * insPoint;
-
-    er.result = ER_SWALLOWED;
-    switch (key) {
-      case '\r':				/* Return */
-	if (en->flags & NEWT_FLAG_RETURNEXIT) {
-	    er.result = ER_EXITFORM;
-	} else {
-	    er.result = ER_NEXTCOMP;
-	}
-	break;
-
-      case '\001':				/* ^A */
-      case NEWT_KEY_HOME:
-	en->cursorPosition = 0;
-	break;
-
-      case '\005':				/* ^E */
-      case NEWT_KEY_END:
-	en->cursorPosition = en->bufUsed;
-	break;
-
-      case '\013':				/* ^K */
-	en->bufUsed = en->cursorPosition;
-	memset(en->buf + en->bufUsed, 0, en->bufAlloced - en->bufUsed);
-	break;
-
-      case '\002':				/* ^B */
-      case NEWT_KEY_LEFT:
-	if (en->cursorPosition)
-	    en->cursorPosition--;
-	break;
-
-      case '\004':
-      case NEWT_KEY_DELETE:
-	chptr = en->buf + en->cursorPosition;
-	if (*chptr) {
-	    chptr++;
-	    while (*chptr) {
-		*(chptr - 1) = *chptr;
-		chptr++;
-	    }
-	    *(chptr - 1) = '\0';
-	    en->bufUsed--;
-	}
-	break;
-
-      case NEWT_KEY_BKSPC:
-	if (en->cursorPosition) {
-	    /* if this isn't true, there's nothing to erase */
-	    chptr = en->buf + en->cursorPosition;
-	    en->bufUsed--;
-	    en->cursorPosition--;
-	    while (*chptr) {
-		*(chptr - 1) = *chptr;
-		chptr++;
-	    }
-	    *(chptr - 1) = '\0';
-	}
-	break;
-
-      case '\006':				/* ^B */
-      case NEWT_KEY_RIGHT:
-	if (en->cursorPosition < en->bufUsed)
-	    en->cursorPosition++;
-	break;
-
-      default:
-	if ((key >= 0x20 && key <= 0x7e) || (key >= 0xa0 && key <= 0xff)) {
-	    if (!(en->flags & NEWT_FLAG_SCROLL) && en->bufUsed >= co->width) {
-		SLtt_beep();
-		break;
-	    }
-
-	    if ((en->bufUsed + 1) == en->bufAlloced) {
-		en->bufAlloced += 20;
-		en->buf = realloc(en->buf, en->bufAlloced);
-		if (en->resultPtr) *en->resultPtr = en->buf;
-		memset(en->buf + en->bufUsed + 1, 0, 20);
-	    }
-
-	    if (en->cursorPosition == en->bufUsed) {
-		en->bufUsed++;
-	    } else {
-		/* insert the new character */
-
-		/* chptr is the last character in the string */
-		chptr = (en->buf + en->bufUsed) - 1;
-		if ((en->bufUsed + 1) == en->bufAlloced) {
-		    /* this string fills the buffer, so clip it */
-		    chptr--;
-		} else
-		    en->bufUsed++;
-
-		insPoint = en->buf + en->cursorPosition;
-
-		while (chptr >= insPoint) {
-		    *(chptr + 1) = *chptr;
-		    chptr--;
-		}
-
-	    }
-
-	    en->buf[en->cursorPosition++] = key;
-	} else {
-	    er.result = ER_IGNORED;
-	}
-    }
-
-    entryDraw(co);
-
-    return er;
-}
-
-char * newtEntryGetValue(newtComponent co) {
-    struct entry * en = co->data;
-
-    return en->buf;
-}
-
-void newtEntrySetFilter(newtComponent co, newtEntryFilter filter, void * data) {
-    struct entry * en = co->data;
-    en->filter = filter;
-    en->filterData = data;
-}
diff --git a/mdk-stage1/newt/form.c b/mdk-stage1/newt/form.c
deleted file mode 100644
index 4ad465e38..000000000
--- a/mdk-stage1/newt/form.c
+++ /dev/null
@@ -1,712 +0,0 @@
-#include <unistd.h>
-#include <slang.h>
-#include <stdarg.h>
-#include <stdlib.h>
-#include <sys/time.h>
-#include <sys/types.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-
-/****************************************************************************
-    These forms handle vertical scrolling of components with a height of 1
-
-    Horizontal scrolling won't work, and scrolling large widgets will fail
-    miserably. It shouldn't be too hard to fix either of those if anyone
-    cares to. I only use scrolling for listboxes and text boxes though so
-    I didn't bother.
-*****************************************************************************/
-
-struct element {
-    int top, left;		/* Actual, not virtual. These are translated */
-    newtComponent co;		/* into actual through vertOffset */
-};
-
-struct fdInfo {
-    int fd;
-    int flags;
-};
-
-struct form {
-    int numCompsAlloced;
-    struct element * elements;
-    int numComps;
-    int currComp;
-    int fixedHeight;
-    int flags;
-    int vertOffset;
-    newtComponent vertBar, exitComp;
-    const char * help;
-    int numRows;
-    int * hotKeys;
-    int numHotKeys;
-    int background;
-    int beenSet;
-    int numFds;
-    struct fdInfo * fds;
-    int maxFd;
-    int timer;    /* in milliseconds */
-    struct timeval lastTimeout;
-    void * helpTag;
-    newtCallback helpCb;
-};
-
-static void gotoComponent(struct form * form, int newComp);
-static struct eventResult formEvent(newtComponent co, struct event ev);
-static struct eventResult sendEvent(newtComponent comp, struct event ev);
-static void formPlace(newtComponent co, int left, int top);
-
-/* Global, ick */
-static newtCallback helpCallback;
-
-/* this isn't static as grid.c tests against it to find forms */
-struct componentOps formOps = {
-    newtDrawForm,
-    formEvent,
-    newtFormDestroy,
-    formPlace,
-    newtDefaultMappedHandler,
-} ;
-
-static inline int componentFits(newtComponent co, int compNum) {
-    struct form * form = co->data;
-    struct element * el = form->elements + compNum;
-
-    if ((co->top + form->vertOffset) > el->top) return 0;
-    if ((co->top + form->vertOffset + co->height) <
-	    (el->top + el->co->height)) return 0;
-
-    return 1;
-}
-
-newtComponent newtForm(newtComponent vertBar, void * help, int flags) {
-    newtComponent co;
-    struct form * form;
-
-    co = malloc(sizeof(*co));
-    form = malloc(sizeof(*form));
-    co->data = form;
-    co->width = 0;
-    co->height = 0;
-    co->top = -1;
-    co->left = -1;
-    co->isMapped = 0;
-
-    co->takesFocus = 0;			/* we may have 0 components */
-    co->ops = &formOps;
-
-    form->help = help;
-    form->flags = flags;
-    form->numCompsAlloced = 5;
-    form->numComps = 0;
-    form->currComp = -1;
-    form->vertOffset = 0;
-    form->fixedHeight = 0;
-    form->numRows = 0;
-    form->numFds = 0;
-    form->maxFd = 0;
-    form->fds = NULL;
-    form->beenSet = 0;
-    form->elements = malloc(sizeof(*(form->elements)) * form->numCompsAlloced);
-
-    form->background = COLORSET_WINDOW;
-    form->hotKeys = malloc(sizeof(int));
-    form->numHotKeys = 0;
-    form->timer = 0;
-    form->lastTimeout.tv_sec = form->lastTimeout.tv_usec = 0;
-    if (!(form->flags & NEWT_FLAG_NOF12)) {
-	newtFormAddHotKey(co, NEWT_KEY_F12);
-    }
-
-    if (vertBar)
-	form->vertBar = vertBar;
-    else
-	form->vertBar = NULL;
-
-    form->helpTag = help;
-    form->helpCb = helpCallback;
-
-    return co;
-}
-
-newtComponent newtFormGetCurrent(newtComponent co) {
-    struct form * form = co->data;
-
-    return form->elements[form->currComp].co;
-}
-
-void newtFormSetCurrent(newtComponent co, newtComponent subco) {
-    struct form * form = co->data;
-    int i, new;
-
-    for (i = 0; i < form->numComps; i++) {
-	 if (form->elements[i].co == subco) break;
-    }
-
-    if (form->elements[i].co != subco) return;
-    new = i;
-
-    if (co->isMapped && !componentFits(co, new)) {
-	gotoComponent(form, -1);
-	form->vertOffset = form->elements[new].top - co->top - 1;
-	if (form->vertOffset > (form->numRows - co->height))
-	    form->vertOffset = form->numRows - co->height;
-    }
-
-    gotoComponent(form, new);
-}
-
-void newtFormSetTimer(newtComponent co, int millisecs) {
-    struct form * form = co->data;
-
-    form->timer = millisecs;
-    form->lastTimeout.tv_usec = 0;
-    form->lastTimeout.tv_sec = 0;
-}
-
-void newtFormSetHeight(newtComponent co, int height) {
-    struct form * form = co->data;
-
-    form->fixedHeight = 1;
-    co->height = height;
-}
-
-void newtFormSetWidth(newtComponent co, int width) {
-    co->width = width;
-}
-
-void newtFormAddComponent(newtComponent co, newtComponent newco) {
-    struct form * form = co->data;
-
-    co->takesFocus = 1;
-
-    if (form->numCompsAlloced == form->numComps) {
-	form->numCompsAlloced += 5;
-	form->elements = realloc(form->elements,
-			    sizeof(*(form->elements)) * form->numCompsAlloced);
-    }
-
-    /* we grab real values for these a bit later */
-    form->elements[form->numComps].left = -2;
-    form->elements[form->numComps].top = -2;
-    form->elements[form->numComps].co = newco;
-
-    if (newco->takesFocus && form->currComp == -1)
-	form->currComp = form->numComps;
-
-    form->numComps++;
-}
-
-void newtFormAddComponents(newtComponent co, ...) {
-    va_list ap;
-    newtComponent subco;
-
-    va_start(ap, co);
-
-    while ((subco = va_arg(ap, newtComponent)))
-	newtFormAddComponent(co, subco);
-
-    va_end(ap);
-}
-
-static void formPlace(newtComponent co, int left, int top) {
-    struct form * form = co->data;
-    int vertDelta, horizDelta;
-    struct element * el;
-    int i;
-
-    newtFormSetSize(co);
-
-    vertDelta = top - co->top;
-    horizDelta = left - co->left;
-    co->top = top;
-    co->left = left;
-
-    for (i = 0, el = form->elements; i < form->numComps; i++, el++) {
-	el->co->top += vertDelta;
-	el->top += vertDelta;
-	el->co->left += horizDelta;
-	el->left += horizDelta;
-    }
-}
-
-void newtDrawForm(newtComponent co) {
-    struct form * form = co->data;
-    struct element * el;
-    int i;
-
-    newtFormSetSize(co);
-
-    SLsmg_set_color(form->background);
-    newtClearBox(co->left, co->top, co->width, co->height);
-    for (i = 0, el = form->elements; i < form->numComps; i++, el++) {
-	/* the scrollbar *always* fits somewhere */
-	if (el->co == form->vertBar) {
-	    el->co->ops->mapped(el->co, 1);
-	    el->co->ops->draw(el->co);
-	} else {
-	    /* only draw it if it'll fit on the screen vertically */
-	    if (componentFits(co, i)) {
-		el->co->top = el->top - form->vertOffset;
-		el->co->ops->mapped(el->co, 1);
-		el->co->ops->draw(el->co);
-	    } else {
-		el->co->ops->mapped(el->co, 0);
-	    }
-	}
-    }
-
-    if (form->vertBar)
-	newtScrollbarSet(form->vertBar, form->vertOffset,
-			 form->numRows - co->height);
-}
-
-static struct eventResult formEvent(newtComponent co, struct event ev) {
-    struct form * form = co->data;
-    newtComponent subco = form->elements[form->currComp].co;
-    int new, wrap = 0;
-    struct eventResult er;
-    int dir = 0, page = 0;
-    int i, num, found;
-    struct element * el;
-
-    er.result = ER_IGNORED;
-    if (!form->numComps) return er;
-
-    subco = form->elements[form->currComp].co;
-
-    switch (ev.when) {
-      case EV_EARLY:
-	  if (ev.event == EV_KEYPRESS) {
-	    if (ev.u.key == NEWT_KEY_TAB) {
-		er.result = ER_SWALLOWED;
-		dir = 1;
-		wrap = 1;
-	    } else if (ev.u.key == NEWT_KEY_UNTAB) {
-		er.result = ER_SWALLOWED;
-		dir = -1;
-		wrap = 1;
-	    }
-	}
-
-	if (form->numComps) {
-	    i = form->currComp;
-	    num = 0;
-	    while (er.result == ER_IGNORED && num != form->numComps ) {
-		er = form->elements[i].co->ops->event(form->elements[i].co, ev);
-
-		num++;
-		i++;
-		if (i == form->numComps) i = 0;
-	    }
-	}
-
-	break;
-
-      case EV_NORMAL:
-	  if (ev.event == EV_MOUSE) {
-	      found = 0;
-	      for (i = 0, el = form->elements; i < form->numComps; i++, el++) {
-		  if ((el->co->top <= ev.u.mouse.y) &&
-		      (el->co->top + el->co->height > ev.u.mouse.y) &&
-		      (el->co->left <= ev.u.mouse.x) &&
-		      (el->co->left + el->co->width > ev.u.mouse.x)) {
-		      found = 1;
-		      if (el->co->takesFocus) {
-			  gotoComponent(form, i);
-			  subco = form->elements[form->currComp].co;
-		      }
-		  }
-		  /* If we did not find a co to send this event to, we
-		     should just swallow the event here. */
-	      }
-	      if (!found) {
-		  er.result = ER_SWALLOWED;
-
-		  return er;
-	      }
-	  }
-	er = subco->ops->event(subco, ev);
-	switch (er.result) {
-	  case ER_NEXTCOMP:
-	    er.result = ER_SWALLOWED;
-	    dir = 1;
-	    break;
-
-	  case ER_EXITFORM:
-	    form->exitComp = subco;
-	    break;
-
-	  default:
-	    break;
-	}
-	break;
-
-      case EV_LATE:
-	er = subco->ops->event(subco, ev);
-
-	if (er.result == ER_IGNORED) {
-	    switch (ev.u.key) {
-	      case NEWT_KEY_UP:
-	      case NEWT_KEY_LEFT:
-	      case NEWT_KEY_BKSPC:
-		er.result = ER_SWALLOWED;
-		dir = -1;
-		break;
-
-	      case NEWT_KEY_DOWN:
-	      case NEWT_KEY_RIGHT:
-		er.result = ER_SWALLOWED;
-		dir = 1;
-		break;
-
-	     case NEWT_KEY_PGUP:
-		er.result = ER_SWALLOWED;
-		dir = -1;
-		page = 1;
-		break;
-
-	     case NEWT_KEY_PGDN:
-		er.result = ER_SWALLOWED;
-		dir = 1;
-		page = 1;
-		break;
-	    }
-	}
-    }
-
-    if (dir) {
-	new = form->currComp;
-
-	if (page) {
-	    new += dir * co->height;
-	    if (new < 0)
-		new = 0;
-	    else if (new >= form->numComps)
-		new = (form->numComps - 1);
-
-	    while (!form->elements[new].co->takesFocus)
-		new = new - dir;
-	} else {
-	    do {
-		new += dir;
-
-		if (wrap) {
-		    if (new < 0)
-			new = form->numComps - 1;
-		    else if (new >= form->numComps)
-			new = 0;
-		} else if (new < 0 || new >= form->numComps)
-		    return er;
-	    } while (!form->elements[new].co->takesFocus);
-	}
-
-	/* make sure this component is visible */
-	if (!componentFits(co, new)) {
-	    gotoComponent(form, -1);
-
-	    if (dir < 0) {
-		/* make the new component the first one */
-		form->vertOffset = form->elements[new].top - co->top;
-	    } else {
-		/* make the new component the last one */
-		form->vertOffset = (form->elements[new].top +
-					form->elements[new].co->height) -
-				    (co->top + co->height);
-	    }
-
-	    if (form->vertOffset < 0) form->vertOffset = 0;
-	    if (form->vertOffset > (form->numRows - co->height))
-		form->vertOffset = form->numRows - co->height;
-
-	    newtDrawForm(co);
-	}
-
-	gotoComponent(form, new);
-	er.result = ER_SWALLOWED;
-    }
-
-    return er;
-}
-
-/* this also destroys all of the components on the form */
-void newtFormDestroy(newtComponent co) {
-    newtComponent subco;
-    struct form * form = co->data;
-    int i;
-
-    /* first, destroy all of the components */
-    for (i = 0; i < form->numComps; i++) {
-	subco = form->elements[i].co;
-	if (subco->ops->destroy) {
-	    subco->ops->destroy(subco);
-	} else {
-	    if (subco->data) free(subco->data);
-	    free(subco);
-	}
-    }
-
-    if (form->hotKeys) free(form->hotKeys);
-
-    free(form->elements);
-    free(form);
-    free(co);
-}
-
-newtComponent newtRunForm(newtComponent co) {
-    struct newtExitStruct es;
-
-    newtFormRun(co, &es);
-    if (es.reason == NEWT_EXIT_HOTKEY) {
-	if (es.u.key == NEWT_KEY_F12) {
-	    es.reason = NEWT_EXIT_COMPONENT;
-	    es.u.co = co;
-	} else {
-	    return NULL;
-	}
-    }
-
-    return es.u.co;
-}
-
-void newtFormAddHotKey(newtComponent co, int key) {
-    struct form * form = co->data;
-
-    form->numHotKeys++;
-    form->hotKeys = realloc(form->hotKeys, sizeof(int) * form->numHotKeys);
-    form->hotKeys[form->numHotKeys - 1] = key;
-}
-
-void newtFormSetSize(newtComponent co) {
-    struct form * form = co->data;
-    int delta, i;
-    struct element * el;
-
-    if (form->beenSet) return;
-
-    form->beenSet = 1;
-
-    if (!form->numComps) return;
-
-    co->width = 0;
-    if (!form->fixedHeight) co->height = 0;
-
-    co->top = form->elements[0].co->top;
-    co->left = form->elements[0].co->left;
-    for (i = 0, el = form->elements; i < form->numComps; i++, el++) {
-	if (el->co->ops == &formOps)
-	    newtFormSetSize(el->co);
-
- 	el->left = el->co->left;
- 	el->top = el->co->top;
-
-	if (co->left > el->co->left) {
-	    delta = co->left - el->co->left;
-	    co->left -= delta;
-	    co->width += delta;
-	}
-
-	if (co->top > el->co->top) {
-	    delta = co->top - el->co->top;
-	    co->top -= delta;
-	    if (!form->fixedHeight)
-		co->height += delta;
-	}
-
-	if ((co->left + co->width) < (el->co->left + el->co->width))
-	    co->width = (el->co->left + el->co->width) - co->left;
-
-	if (!form->fixedHeight) {
-	    if ((co->top + co->height) < (el->co->top + el->co->height))
-		co->height = (el->co->top + el->co->height) - co->top;
-	}
-
-	if ((el->co->top + el->co->height - co->top) > form->numRows) {
-	    form->numRows = el->co->top + el->co->height - co->top;
-	}
-    }
-}
-
-void newtFormRun(newtComponent co, struct newtExitStruct * es) {
-    struct form * form = co->data;
-    struct event ev;
-    struct eventResult er;
-    int key, i, max;
-    int done = 0;
-    fd_set readSet, writeSet;
-    struct timeval nextTimeout, now, timeout;
-
-    newtFormSetSize(co);
-    /* draw all of the components */
-    newtDrawForm(co);
-
-    if (form->currComp == -1) {
-	gotoComponent(form, 0);
-    } else
-	gotoComponent(form, form->currComp);
-
-    while (!done) {
-	newtRefresh();
-
-	FD_ZERO(&readSet);
-	FD_ZERO(&writeSet);
-	FD_SET(0, &readSet);
-	max = form->maxFd;
-
-	for (i = 0; i < form->numFds; i++) {
-	    if (form->fds[i].flags & NEWT_FD_READ)
-		FD_SET(form->fds[i].fd, &readSet);
-	    if (form->fds[i].flags & NEWT_FD_WRITE)
-		FD_SET(form->fds[i].fd, &writeSet);
-	}
-
-	if (form->timer) {
-	    /* Calculate when we next need to return with a timeout. Do
-	       this inside the loop in case a callback resets the timer. */
-	    if (!form->lastTimeout.tv_sec && !form->lastTimeout.tv_usec)
-		gettimeofday(&form->lastTimeout, NULL);
-
-	    nextTimeout.tv_sec = form->lastTimeout.tv_sec + 
-		    (form->timer / 1000);
-	    nextTimeout.tv_usec = form->lastTimeout.tv_usec + 
-				    (form->timer % 1000) * 1000;
-
-	    gettimeofday(&now, 0);
-
-	    if (now.tv_sec > nextTimeout.tv_sec) {
-		timeout.tv_sec = timeout.tv_usec = 0;
-	    } else if (now.tv_sec == nextTimeout.tv_sec) {
-		timeout.tv_sec = 0;
-		if (now.tv_usec > nextTimeout.tv_usec)
-		    timeout.tv_usec = 0;
-		else
-		    timeout.tv_usec = nextTimeout.tv_usec - now.tv_usec;
-	    } else if (now.tv_sec < nextTimeout.tv_sec) {
-		timeout.tv_sec = nextTimeout.tv_sec - now.tv_sec;
-		if (now.tv_usec > nextTimeout.tv_usec)
-		    timeout.tv_sec--,
-		    timeout.tv_usec = nextTimeout.tv_usec + 1000000 -
-					now.tv_usec;
-		else 
-		    timeout.tv_usec = nextTimeout.tv_usec - now.tv_usec;
-	    }
-	} else {
-	    timeout.tv_sec = timeout.tv_usec = 0;
-	}
-
-	i = select(max + 1, &readSet, &writeSet, NULL, 
-			form->timer ? &timeout : NULL);
-	if (i < 0) continue;	/* ?? What should we do here? */
-
-	if (i == 0) {
-	    done = 1;
-	    es->reason = NEWT_EXIT_TIMER;
-	    gettimeofday(&form->lastTimeout, NULL);
-	} else
-	{
-	    if (FD_ISSET(0, &readSet)) {
-
-		key = newtGetKey();
-
-		if (key == NEWT_KEY_RESIZE) {
-		    /* newtResizeScreen(1); */
-		    continue;
-		}
-
-		for (i = 0; i < form->numHotKeys; i++) {
-		    if (form->hotKeys[i] == key) {
-			es->reason = NEWT_EXIT_HOTKEY;
-			es->u.key = key;
-			done = 1;
-			break;
-		    }
-		}
-
-		if (key == NEWT_KEY_F1 && form->helpTag && form->helpCb)
-		    form->helpCb(co, form->helpTag);
-
-		if (!done) {
-		    ev.event = EV_KEYPRESS;
-		    ev.u.key = key;
-
-		    er = sendEvent(co, ev);
-
-		    if (er.result == ER_EXITFORM) {
-			done = 1;
-			es->reason = NEWT_EXIT_COMPONENT;
-			es->u.co = form->exitComp;
-		    }
-		}
-	    } else {
-		es->reason = NEWT_EXIT_FDREADY;
-		done = 1;
-	    }
-	}
-    }
-    newtRefresh();
-}
-
-static struct eventResult sendEvent(newtComponent co, struct event ev) {
-    struct eventResult er;
-
-    ev.when = EV_EARLY;
-    er = co->ops->event(co, ev);
-
-    if (er.result == ER_IGNORED) {
-	ev.when = EV_NORMAL;
-	er = co->ops->event(co, ev);
-    }
-
-    if (er.result == ER_IGNORED) {
-	ev.when = EV_LATE;
-	er = co->ops->event(co, ev);
-    }
-
-    return er;
-}
-
-static void gotoComponent(struct form * form, int newComp) {
-    struct event ev;
-
-    if (form->currComp != -1) {
-	ev.event = EV_UNFOCUS;
-	sendEvent(form->elements[form->currComp].co, ev);
-    }
-
-    form->currComp = newComp;
-
-    if (form->currComp != -1) {
-	ev.event = EV_FOCUS;
-	ev.when = EV_NORMAL;
-	sendEvent(form->elements[form->currComp].co, ev);
-    }
-}
-
-void newtComponentAddCallback(newtComponent co, newtCallback f, void * data) {
-    co->callback = f;
-    co->callbackData = data;
-}
-
-void newtComponentTakesFocus(newtComponent co, int val) {
-    co->takesFocus = val;
-}
-
-void newtFormSetBackground(newtComponent co, int color) {
-    struct form * form = co->data;
-
-    form->background = color;
-}
-
-void newtFormWatchFd(newtComponent co, int fd, int fdFlags) {
-    struct form * form = co->data;
-
-    form->fds = realloc(form->fds, (form->numFds + 1) * sizeof(*form->fds));
-    form->fds[form->numFds].fd = fd;
-    form->fds[form->numFds++].flags = fdFlags;
-    if (form->maxFd < fd) form->maxFd = fd;
-}
-
-void newtSetHelpCallback(newtCallback cb) {
-    helpCallback = cb;
-}
diff --git a/mdk-stage1/newt/grid.c b/mdk-stage1/newt/grid.c
deleted file mode 100644
index 37d2b2e74..000000000
--- a/mdk-stage1/newt/grid.c
+++ /dev/null
@@ -1,389 +0,0 @@
-#include <alloca.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct gridField {
-    enum newtGridElement type;
-    union {
-	newtGrid grid;
-	newtComponent co;
-    } u;
-    int padLeft, padTop, padRight, padBottom;
-    int anchor;
-    int flags;
-}; 
-
-struct grid_s {
-    int rows, cols;
-    int width, height;		/* totals, -1 means unknown */
-    struct gridField ** fields;
-};
-
-/* this is a bit of a hack */
-extern struct componentOps formOps[];
-
-newtGrid newtCreateGrid(int cols, int rows) {
-    newtGrid grid;
-
-    grid = malloc(sizeof(*grid));
-    grid->rows = rows;
-    grid->cols = cols;
-
-    grid->fields = malloc(sizeof(*grid->fields) * cols);
-    while (cols--) {
-	grid->fields[cols] = malloc(sizeof(**(grid->fields)) * rows);
-	memset(grid->fields[cols], 0, sizeof(**(grid->fields)) * rows);
-    }
-
-    grid->width = grid->height = -1;
-
-    return grid;
-}
-
-void newtGridSetField(newtGrid grid, int col, int row, 
-		      enum newtGridElement type, void * val, int padLeft,
-		      int padTop, int padRight, int padBottom, int anchor,
-		      int flags) {
-    struct gridField * field = &grid->fields[col][row];
-
-    if (field->type == NEWT_GRID_SUBGRID) 
-	newtGridFree(field->u.grid, 1);
-
-    field->type = type;
-    field->u.co = (void *) val;
-
-    field->padLeft = padLeft;
-    field->padRight = padRight;
-    field->padTop = padTop;
-    field->padBottom = padBottom;
-    field->anchor = anchor;
-    field->flags = flags;
-
-    grid->width = grid->height = -1;
-}
-
-static void distSpace(int extra, int items, int * list) {
-    int all, some, i;
-
-    all = extra / items;
-    some = extra % items;
-    for (i = 0; i < items; i++) {
-	list[i] += all;
-	if (some) {
-	    list[i]++;
-	    some--;
-	}
-    }
-}
-
-static void shuffleGrid(newtGrid grid, int left, int top, int set) {
-    struct gridField * field;
-    int row, col;
-    int i, j;
-    int minWidth, minHeight;
-    int * widths, * heights;
-    int thisLeft, thisTop;
-    int x, y, remx, remy;
-
-    widths = alloca(sizeof(*widths) * grid->cols);
-    memset(widths, 0, sizeof(*widths) * grid->cols);
-    heights = alloca(sizeof(*heights) * grid->rows);
-    memset(heights, 0, sizeof(*heights) * grid->rows);
-
-    minWidth = 0;
-    for (row = 0; row < grid->rows; row++) {
-	i = 0;
-	for (col = 0; col < grid->cols; col++) {
-	    field = &grid->fields[col][row];
-	    if (field->type == NEWT_GRID_SUBGRID) {
-		/* we'll have to redo this later */
-		if (field->u.grid->width == -1) 
-		    shuffleGrid(field->u.grid, left, top, 0);
-		j = field->u.grid->width;
-	    } else if (field->type == NEWT_GRID_COMPONENT) {
-		if (field->u.co->ops == formOps)
-		    newtFormSetSize(field->u.co);
-		j = field->u.co->width;
-	    } else 
-		j = 0;
-
-	    j += field->padLeft + field->padRight;
-
-	    if (j > widths[col]) widths[col] = j;
-	    i += widths[col];
-	}
-
-	if (i > minWidth) minWidth = i;
-    }
-
-    minHeight = 0;
-    for (col = 0; col < grid->cols; col++) {
-	i = 0;
-	for (row = 0; row < grid->rows; row++) {
-	    field = &grid->fields[col][row];
-	    if (field->type == NEWT_GRID_SUBGRID) {
-		/* we'll have to redo this later */
-		if (field->u.grid->height == -1) 
-		    shuffleGrid(field->u.grid, 0, 0, 0);
-		j = field->u.grid->height;
-	    } else if (field->type == NEWT_GRID_COMPONENT){
-		j = field->u.co->height;
-	    } else 
-		j = 0;
-
-	    j += field->padTop + field->padBottom;
-
-	    if (j > heights[row]) heights[row] = j;
-	    i += heights[row];
-	}
-
-	if (i > minHeight) minHeight = i;
-    }
-
-    /* this catches the -1 case */
-    if (grid->width < minWidth) grid->width = minWidth;		/* ack! */
-    if (grid->height < minHeight) grid->height = minHeight;	/* ditto! */
-
-    if (!set) return;
-
-    distSpace(grid->width - minWidth, grid->cols, widths);
-    distSpace(grid->height - minHeight, grid->rows, heights);
-
-    thisTop = top;
-    for (row = 0; row < grid->rows; row++) {
-	i = 0;
-	thisLeft = left;
-	for (col = 0; col < grid->cols; col++) {
-	    field = &grid->fields[col][row];
-
-	    if (field->type == NEWT_GRID_EMPTY) continue;
-
-	    x = thisLeft + field->padLeft;
-	    remx = widths[col] - field->padLeft - field->padRight;
-	    y = thisTop + field->padTop;
-	    remy = heights[row] - field->padTop - field->padBottom;
-
-	    if (field->type == NEWT_GRID_SUBGRID) {
-		remx -= field->u.grid->width;
-		remy -= field->u.grid->height;
-	    } else if (field->type == NEWT_GRID_COMPONENT) {
-		remx -= field->u.co->width;
-		remy -= field->u.co->height;
-	    }
-
-	    if (!(field->flags & NEWT_GRID_FLAG_GROWX)) {
-		if (field->anchor & NEWT_ANCHOR_RIGHT)
-		    x += remx;
-		else if (!(field->anchor & NEWT_ANCHOR_LEFT))
-		    x += (remx / 2);
-	    }
-	 
-	    if (!(field->flags & NEWT_GRID_FLAG_GROWY)) {
-		if (field->anchor & NEWT_ANCHOR_BOTTOM)
-		    y += remx;
-		else if (!(field->anchor & NEWT_ANCHOR_TOP))
-		    y += (remy / 2);
-	    }
-
-	    if (field->type == NEWT_GRID_SUBGRID) {
-		if (field->flags & NEWT_GRID_FLAG_GROWX)
-		    field->u.grid->width = widths[col] - field->padLeft 
-						- field->padRight;
-		if (field->flags & NEWT_GRID_FLAG_GROWY)
-		    field->u.grid->height = heights[col] - field->padTop
-						- field->padBottom;
-
-		shuffleGrid(field->u.grid, x, y, 1);
-	    } else if (field->type == NEWT_GRID_COMPONENT) {
-		field->u.co->ops->place(field->u.co, x, y);
-	    }
-
-	    thisLeft += widths[col];
-	}
-
-	thisTop += heights[row];
-    }
-}
-
-void newtGridPlace(newtGrid grid, int left, int top) {
-    shuffleGrid(grid, left, top, 1);
-}
-
-void newtGridFree(newtGrid grid, int recurse) {
-    int row, col;
-
-    for (col = 0; col < grid->cols; col++) {
-	if (recurse) {
-	    for (row = 0; row < grid->rows; row++) {
-		if (grid->fields[col][row].type == NEWT_GRID_SUBGRID)
-		    newtGridFree(grid->fields[col][row].u.grid, 1);
-	    }
-	}
-
-	free(grid->fields[col]);
-    }
-
-    free(grid->fields);
-    free(grid);
-}
-
-void newtGridGetSize(newtGrid grid, int * width, int * height) {
-    if (grid->width == -1 || grid->height == -1) {
-	grid->width = grid->height = -1;
-	shuffleGrid(grid, 0, 0, 1);
-    }
-
-    *width = grid->width;
-    *height = grid->height;
-}
-
-void newtGridWrappedWindow(newtGrid grid, char * title) {
-    int width, height, offset = 0;
-
-    newtGridGetSize(grid, &width, &height);
-    if ((size_t)width < strlen(title) + 2) {
-	offset = ((strlen(title) + 2) - width) / 2; 
-	width = strlen(title) + 2;
-    }
-    newtCenteredWindow(width + 2, height + 2, title);
-    newtGridPlace(grid, 1 + offset, 1);
-}
-
-void newtGridWrappedWindowAt(newtGrid grid, char * title, int left, int top) {
-    int width, height;
-
-    newtGridGetSize(grid, &width, &height);
-    newtOpenWindow(left, top, width + 2, height + 2, title);
-    newtGridPlace(grid, 1, 1);
-}
-
-void newtGridAddComponentsToForm(newtGrid grid, newtComponent form, 
-				 int recurse) {
-    int row, col;
-
-    for (col = 0; col < grid->cols; col++) {
-	for (row = 0; row < grid->rows; row++) {
-	    if (grid->fields[col][row].type == NEWT_GRID_SUBGRID && recurse)
-		newtGridAddComponentsToForm(grid->fields[col][row].u.grid,
-					    form, 1);
-	    else if (grid->fields[col][row].type == NEWT_GRID_COMPONENT)
-		newtFormAddComponent(form, grid->fields[col][row].u.co);
-	}
-    }
-}
-
-/* this handles up to 50 items */
-static newtGrid stackem(int isVert, enum newtGridElement type1, void * what1,
-			va_list args, int close) {
-    struct item {
-	enum newtGridElement type;
-	void * what;
-    } items[50];
-    int i, num;
-    newtGrid grid;
-    
-    items[0].type = type1, items[0].what = what1, num = 1;
-    while (1) {
-	items[num].type = va_arg(args, enum newtGridElement);
-	if (items[num].type == NEWT_GRID_EMPTY) break;
-
-	items[num].what = va_arg(args, void *);
-	num++;
-    }
-
-    grid = newtCreateGrid(isVert ? 1 : num, isVert ? num : 1);
-
-    for (i = 0; i < num; i++) {
-	newtGridSetField(grid, isVert ? 0 : i, isVert ? i : 0, 
-			 items[i].type, items[i].what,
-			 close ? 0 : (i ? (isVert ? 0 : 1) : 0),
-			 close ? 0 : (i ? (isVert ? 1 : 0) : 0), 0, 0, 0, 0);
-    }
-
-    return grid;
-}
-
-newtGrid newtGridHCloseStacked(enum newtGridElement type1, void * what1, ...) {
-    va_list args;
-    newtGrid grid;
-
-    va_start(args, what1);
-
-    grid = stackem(0, type1, what1, args, 1);
-
-    va_start(args, what1);
-
-    return grid;
-}
-
-newtGrid newtGridVCloseStacked(enum newtGridElement type1, void * what1, ...) {
-    va_list args;
-    newtGrid grid;
-
-    va_start(args, what1);
-
-    grid = stackem(1, type1, what1, args, 1);
-
-    va_start(args, what1);
-
-    return grid;
-}
-
-newtGrid newtGridVStacked(enum newtGridElement type1, void * what1, ...) {
-    va_list args;
-    newtGrid grid;
-
-    va_start(args, what1);
-
-    grid = stackem(1, type1, what1, args, 0);
-
-    va_start(args, what1);
-
-    return grid;
-}
-
-newtGrid newtGridHStacked(enum newtGridElement type1, void * what1, ...) {
-    va_list args;
-    newtGrid grid;
-
-    va_start(args, what1);
-
-    grid = stackem(0, type1, what1, args, 0);
-
-    va_start(args, what1);
-
-    return grid;
-}
-
-newtGrid newtGridBasicWindow(newtComponent text, newtGrid middle,
-			     newtGrid buttons) {
-    newtGrid grid;
-
-    grid = newtCreateGrid(1, 3);
-    newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, text,
-		     0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
-    newtGridSetField(grid, 0, 1, NEWT_GRID_SUBGRID, middle,
-		     0, 1, 0, 0, 0, 0);
-    newtGridSetField(grid, 0, 2, NEWT_GRID_SUBGRID, buttons,
-		     0, 1, 0, 0, 0, NEWT_GRID_FLAG_GROWX);
-
-    return grid;
-}
-
-newtGrid newtGridSimpleWindow(newtComponent text, newtComponent middle,
-			     newtGrid buttons) {
-    newtGrid grid;
-
-    grid = newtCreateGrid(1, 3);
-    newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, text,
-		     0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
-    newtGridSetField(grid, 0, 1, NEWT_GRID_COMPONENT, middle,
-		     0, 1, 0, 0, 0, 0);
-    newtGridSetField(grid, 0, 2, NEWT_GRID_SUBGRID, buttons,
-		     0, 1, 0, 0, 0, NEWT_GRID_FLAG_GROWX);
-
-    return grid;
-}
diff --git a/mdk-stage1/newt/label.c b/mdk-stage1/newt/label.c
deleted file mode 100644
index f1a9cebbf..000000000
--- a/mdk-stage1/newt/label.c
+++ /dev/null
@@ -1,81 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct label {
-    char * text;
-    int length;
-};
-
-static void labelDraw(newtComponent co);
-static void labelDestroy(newtComponent co);
-
-static struct componentOps labelOps = {
-    labelDraw,
-    newtDefaultEventHandler,
-    labelDestroy,
-    newtDefaultPlaceHandler,
-    newtDefaultMappedHandler,
-} ;
-
-newtComponent newtLabel(int left, int top, const char * text) {
-    newtComponent co;
-    struct label * la;
-
-    co = malloc(sizeof(*co));
-    la = malloc(sizeof(struct label));
-    co->data = la;
-
-    co->ops = &labelOps;
-
-    co->height = 1;
-    co->width = strlen(text);
-    co->top = top;
-    co->left = left;
-    co->takesFocus = 0;
-
-    la->length = strlen(text);
-    la->text = strdup(text);
-
-    return co;
-}
-
-void newtLabelSetText(newtComponent co, const char * text) {
-    int newLength;
-    struct label * la = co->data;
-
-    newLength = strlen(text);
-    if (newLength <= la->length) {
-	memset(la->text, ' ', la->length);
-	memcpy(la->text, text, newLength);
-    } else {
-	free(la->text);
-	la->text = strdup(text);
-	la->length = newLength;
-	co->width = newLength;
-    }
-
-    labelDraw(co);
-}
-
-static void labelDraw(newtComponent co) {
-    struct label * la = co->data;
-
-    if (co->isMapped == -1) return;
-
-    SLsmg_set_color(COLORSET_LABEL);
-
-    newtGotorc(co->top, co->left);
-    SLsmg_write_string(la->text);
-}
-
-static void labelDestroy(newtComponent co) {
-    struct label * la = co->data;
-
-    free(la->text);
-    free(la);
-    free(co);
-}
diff --git a/mdk-stage1/newt/listbox.c b/mdk-stage1/newt/listbox.c
deleted file mode 100644
index cdbf792ca..000000000
--- a/mdk-stage1/newt/listbox.c
+++ /dev/null
@@ -1,752 +0,0 @@
-/* This goofed-up box whacked into shape by Elliot Lee <sopwith@cuc.edu>
-   (from the original listbox by Erik Troan <ewt@redhat.com>)
-   and contributed to newt for use under the LGPL license.
-   Copyright (C) 1996, 1997 Elliot Lee */
-
-#include <slang.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-
-/* Linked list of items in the listbox */
-struct items {
-    char * text;
-    const void *data;
-    unsigned char isSelected;
-    struct items *next;
-};
-
-/* Holds all the relevant information for this listbox */
-struct listbox {
-    newtComponent sb;   /* Scrollbar on right side of listbox */
-    int curWidth;	/* size of text w/o scrollbar or border*/
-    int curHeight;	/* size of text w/o border */
-    int sbAdjust;
-    int bdxAdjust, bdyAdjust;
-    int numItems, numSelected;
-    int userHasSetWidth;
-    int currItem, startShowItem; /* startShowItem is the first item displayed
-				   on the screen */
-    int isActive; /* If we handle key events all the time, it seems
-		     to do things even when they are supposed to be for
-		     another button/whatever */
-    struct items *boxItems;
-    int grow;
-    int flags; /* flags for this listbox, right now just
-		  NEWT_FLAG_RETURNEXIT */
-};
-
-static void listboxDraw(newtComponent co);
-static void listboxDestroy(newtComponent co);
-static struct eventResult listboxEvent(newtComponent co, struct event ev);
-static void newtListboxRealSetCurrent(newtComponent co);
-static void listboxPlace(newtComponent co, int newLeft, int newTop);
-static inline void updateWidth(newtComponent co, struct listbox * li,
-				int maxField);
-static void listboxMapped(newtComponent co, int isMapped);
-
-static struct componentOps listboxOps = {
-    listboxDraw,
-    listboxEvent,
-    listboxDestroy,
-    listboxPlace,
-    listboxMapped,
-};
-
-static void listboxMapped(newtComponent co, int isMapped) {
-    struct listbox * li = co->data;
-
-    co->isMapped = isMapped;
-    if (li->sb)
-	li->sb->ops->mapped(li->sb, isMapped);
-}
-
-static void listboxPlace(newtComponent co, int newLeft, int newTop) {
-    struct listbox * li = co->data;
-
-    co->top = newTop;
-    co->left = newLeft;
-
-    if (li->sb)
-	li->sb->ops->place(li->sb, co->left + co->width - li->bdxAdjust - 1,
-			   co->top);
-}
-
-newtComponent newtListbox(int left, int top, int height, int flags) {
-    newtComponent co, sb;
-    struct listbox * li;
-
-    if (!(co = malloc(sizeof(*co))))
-	return NULL;
-
-    if (!(li = malloc(sizeof(struct listbox)))) {
-	free(co);
-	return NULL;
-    }
-
-    li->boxItems = NULL;
-    li->numItems = 0;
-    li->currItem = 0;
-    li->numSelected = 0;
-    li->isActive = 0;
-    li->userHasSetWidth = 0;
-    li->startShowItem = 0;
-    li->sbAdjust = 0;
-    li->bdxAdjust = 0;
-    li->bdyAdjust = 0;
-    li->flags = flags & (NEWT_FLAG_RETURNEXIT | NEWT_FLAG_BORDER |
-			 NEWT_FLAG_MULTIPLE);
-
-    if (li->flags & NEWT_FLAG_BORDER) {
-	li->bdxAdjust = 2;
-	li->bdyAdjust = 1;
-    }
-
-    co->height = height;
-    li->curHeight = co->height - (2 * li->bdyAdjust);
-
-    if (height) {
-	li->grow = 0;
-	if (flags & NEWT_FLAG_SCROLL) {
-	    sb = newtVerticalScrollbar(left, top + li->bdyAdjust,
-					li->curHeight,
-					COLORSET_LISTBOX, COLORSET_ACTLISTBOX);
-	    li->sbAdjust = 3;
-	} else {
-	    sb = NULL;
-	}
-    } else {
-	li->grow = 1;
-	sb = NULL;
-    }
-
-    li->sb = sb;
-    co->data = li;
-    co->isMapped = 0;
-    co->left = left;
-    co->top = top;
-    co->ops = &listboxOps;
-    co->takesFocus = 1;
-    co->callback = NULL;
-
-    updateWidth(co, li, 5);
-
-    return co;
-}
-
-static inline void updateWidth(newtComponent co, struct listbox * li,
-				int maxField) {
-    li->curWidth = maxField;
-    co->width = li->curWidth + li->sbAdjust + 2 * li->bdxAdjust;
-
-    if (li->sb)
-	li->sb->left = co->left + co->width - li->bdxAdjust - 1;
-}
-
-void newtListboxSetCurrentByKey(newtComponent co, void * key) {
-    struct listbox * li = co->data;
-    struct items * item;
-    int i;
-
-    item = li->boxItems, i = 0;
-    while (item && item->data != key)
-	item = item->next, i++;
-
-    if (item)
-	newtListboxSetCurrent(co, i);
-}
-
-void newtListboxSetCurrent(newtComponent co, int num)
-{
-    struct listbox * li = co->data;
-
-    if (num >= li->numItems)
-	li->currItem = li->numItems - 1;
-    else if (num < 0)
-	li->currItem = 0;
-    else
-	li->currItem = num;
-
-    if (li->currItem < li->startShowItem)
-	li->startShowItem = li->currItem;
-    else if (li->currItem - li->startShowItem > li->curHeight - 1)
-	li->startShowItem = li->currItem - li->curHeight + 1;
-    if (li->startShowItem + li->curHeight > li->numItems)
-	li->startShowItem = li->numItems - li->curHeight;
-    if(li->startShowItem < 0)
-	li->startShowItem = 0;
-
-    newtListboxRealSetCurrent(co);
-}
-
-static void newtListboxRealSetCurrent(newtComponent co)
-{
-    struct listbox * li = co->data;
-
-    if(li->sb)
-	newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
-    listboxDraw(co);
-    if(co->callback) co->callback(co, co->callbackData);
-}
-
-void newtListboxSetWidth(newtComponent co, int width) {
-    struct listbox * li = co->data;
-
-    co->width = width;
-    li->curWidth = co->width - li->sbAdjust - 2 * li->bdxAdjust;
-    li->userHasSetWidth = 1;
-    if (li->sb) li->sb->left = co->width + co->left - 1;
-    listboxDraw(co);
-}
-
-void * newtListboxGetCurrent(newtComponent co) {
-    struct listbox * li = co->data;
-    int i;
-    struct items *item;
-
-    for(i = 0, item = li->boxItems; item != NULL && i < li->currItem;
-	i++, item = item->next);
-
-    if (item)
-	return (void *)item->data;
-    else
-	return NULL;
-}
-
-void newtListboxSelectItem(newtComponent co, const void * key,
-	enum newtFlagsSense sense)
-{
-    struct listbox * li = co->data;
-    int i;
-    struct items * item;
-
-    item = li->boxItems, i = 0;
-    while (item && item->data != key)
-	item = item->next, i++;
-
-    if (!item) return;
-
-    if (item->isSelected)
-	li->numSelected--;
-
-    switch(sense) {
-	case NEWT_FLAGS_RESET:
-		item->isSelected = 0; break;
-	case NEWT_FLAGS_SET:
-		item->isSelected = 1; break;
-	case NEWT_FLAGS_TOGGLE:
-		item->isSelected = !item->isSelected;
-    }
-
-    if (item->isSelected)
-	li->numSelected++;
-
-    listboxDraw(co);
-}
-
-void newtListboxClearSelection(newtComponent co)
-{
-    struct items *item;
-    struct listbox * li = co->data;
-
-    for(item = li->boxItems; item != NULL;
-	item = item->next)
-	item->isSelected = 0;
-    li->numSelected = 0;
-    listboxDraw(co);
-}
-
-/* Free the returned array after use, but NOT the values in the array */
-void ** newtListboxGetSelection(newtComponent co, int *numitems)
-{
-    struct listbox * li;
-    int i;
-    void **retval;
-    struct items *item;
-
-    if(!co || !numitems) return NULL;
-
-    li = co->data;
-    if(!li || !li->numSelected) return NULL;
-
-    retval = malloc(li->numSelected * sizeof(void *));
-    for(i = 0, item = li->boxItems; item != NULL;
-	item = item->next)
-	if(item->isSelected)
-	    retval[i++] = (void *)item->data;
-    *numitems = li->numSelected;
-    return retval;
-}
-
-void newtListboxSetEntry(newtComponent co, int num, const char * text) {
-    struct listbox * li = co->data;
-    int i;
-    struct items *item;
-
-    for(i = 0, item = li->boxItems; item != NULL && i < num;
-	i++, item = item->next);
-
-    if(!item)
-	return;
-    else {
-	free(item->text);
-	item->text = strdup(text);
-    }
-    if (li->userHasSetWidth == 0 && strlen(text) > (size_t)li->curWidth) {
-	updateWidth(co, li, strlen(text));
-    }
-
-    if (num >= li->startShowItem && num <= li->startShowItem + co->height)
-	listboxDraw(co);
-}
-
-void newtListboxSetData(newtComponent co, int num, void * data) {
-    struct listbox * li = co->data;
-    int i;
-    struct items *item;
-
-    for(i = 0, item = li->boxItems; item != NULL && i < num;
-	i++, item = item->next);
-
-    item->data = data;
-}
-
-int newtListboxAppendEntry(newtComponent co, const char * text,
-	                const void * data) {
-    struct listbox * li = co->data;
-    struct items *item;
-
-    if(li->boxItems) {
-	for (item = li->boxItems; item->next != NULL; item = item->next);
-
-	item = item->next = malloc(sizeof(struct items));
-    } else {
-	item = li->boxItems = malloc(sizeof(struct items));
-    }
-
-    if (!li->userHasSetWidth && text && (strlen(text) > (size_t)li->curWidth))
-	updateWidth(co, li, strlen(text));
-
-    item->text = strdup(text); item->data = data; item->next = NULL;
-    item->isSelected = 0;
-
-    if (li->grow)
-	co->height++, li->curHeight++;
-    li->numItems++;
-
-    return 0;
-}
-
-int newtListboxInsertEntry(newtComponent co, const char * text,
-	                   const void * data, void * key) {
-    struct listbox * li = co->data;
-    struct items *item, *t;
-
-    if (li->boxItems) {
-	if (key) {
-	    item = li->boxItems;
-	    while (item && item->data != key) item = item->next;
-
-	    if (!item) return 1;
-
-	    t = item->next;
-	    item = item->next = malloc(sizeof(struct items));
-	    item->next = t;
-	} else {
-	    t = li->boxItems;
-	    item = li->boxItems = malloc(sizeof(struct items));
-	    item->next = t;
-	}
-    } else if (key) {
-	return 1;
-    } else {
-	item = li->boxItems = malloc(sizeof(struct items));
-	item->next = NULL;
-    }
-
-    if (!li->userHasSetWidth && text && (strlen(text) > (size_t)li->curWidth))
-	updateWidth(co, li, strlen(text));
-
-    item->text = strdup(text?text:"(null)"); item->data = data;
-    item->isSelected = 0;
-
-    if (li->sb)
-	li->sb->left = co->left + co->width - li->bdxAdjust - 1;
-    li->numItems++;
-
-    listboxDraw(co);
-
-    return 0;
-}
-
-int newtListboxDeleteEntry(newtComponent co, void * key) {
-    struct listbox * li = co->data;
-    int widest = 0, t;
-    struct items *item, *item2 = NULL;
-    int num;
-
-    if (li->boxItems == NULL || li->numItems <= 0)
-	return 0;
-
-    num = 0;
-
-    item2 = NULL, item = li->boxItems;
-    while (item && item->data != key) {
-	item2 = item;
-	item = item->next;
-	num++;
-    }
-
-    if (!item)
-	return -1;
-
-    if (item2)
-	item2->next = item->next;
-    else
-	li->boxItems = item->next;
-
-    free(item->text);
-    free(item);
-    li->numItems--;
-
-    if (!li->userHasSetWidth) {
-	widest = 0;
-	for (item = li->boxItems; item != NULL; item = item->next)
-	    if ((t = strlen(item->text)) > widest) widest = t;
-    }
-
-    if (li->currItem >= num)
-	li->currItem--;
-
-    if (!li->userHasSetWidth) {
-	updateWidth(co, li, widest);
-    }
-
-    listboxDraw(co);
-
-    return 0;
-}
-
-void newtListboxClear(newtComponent co)
-{
-    struct listbox * li;
-    struct items *anitem, *nextitem;
-    if(co == NULL || (li = co->data) == NULL)
-	return;
-    for(anitem = li->boxItems; anitem != NULL; anitem = nextitem) {
-	nextitem = anitem->next;
-	free(anitem->text);
-	free(anitem);
-    }
-    li->numItems = li->numSelected = li->currItem = li->startShowItem = 0;
-    li->boxItems = NULL;
-    if (!li->userHasSetWidth)
-	updateWidth(co, li, 5);
-}
-
-/* If you don't want to get back the text, pass in NULL for the ptr-ptr. Same
-   goes for the data. */
-void newtListboxGetEntry(newtComponent co, int num, char **text, void **data) {
-    struct listbox * li = co->data;
-    int i;
-    struct items *item;
-
-    if (!li->boxItems || num >= li->numItems) {
-	if(text)
-	    *text = NULL;
-	if(data)
-	    *data = NULL;
-	return;
-    }
-
-    i = 0;
-    item = li->boxItems;
-    while (item && i < num) {
-	i++, item = item->next;
-    }
-
-    if (item) {
-	if (text)
-	    *text = item->text;
-	if (data)
-	    *data = (void *)item->data;
-    }
-}
-
-static void listboxDraw(newtComponent co)
-{
-    struct listbox * li = co->data;
-    struct items *item;
-    int i, j;
-
-    if (!co->isMapped) return ;
-
-    if(li->flags & NEWT_FLAG_BORDER) {
-      if(li->isActive)
-	  SLsmg_set_color(NEWT_COLORSET_ACTLISTBOX);
-      else
-          SLsmg_set_color(NEWT_COLORSET_LISTBOX);
-
-      newtDrawBox(co->left, co->top, co->width, co->height, 0);
-    }
-
-    if(li->sb)
-	li->sb->ops->draw(li->sb);
-
-    SLsmg_set_color(NEWT_COLORSET_LISTBOX);
-
-    for(i = 0, item = li->boxItems; item != NULL && i < li->startShowItem;
-	i++, item = item->next);
-
-    j = i;
-
-    for (i = 0; item != NULL && i < li->curHeight; i++, item = item->next) {
-	if (!item->text) continue;
-
-	newtGotorc(co->top + i + li->bdyAdjust, co->left + li->bdxAdjust);
-	if(j + i == li->currItem) {
-	    if(item->isSelected)
-		SLsmg_set_color(NEWT_COLORSET_ACTSELLISTBOX);
-	    else
-		SLsmg_set_color(NEWT_COLORSET_ACTLISTBOX);
-	} else if(item->isSelected)
-	    SLsmg_set_color(NEWT_COLORSET_SELLISTBOX);
-	else
-	    SLsmg_set_color(NEWT_COLORSET_LISTBOX);
-
-	SLsmg_write_nstring(item->text, li->curWidth);
-
-    }
-    newtGotorc(co->top + (li->currItem - li->startShowItem), co->left);
-}
-
-static struct eventResult listboxEvent(newtComponent co, struct event ev) {
-    struct eventResult er;
-    struct listbox * li = co->data;
-    struct items *item;
-    int i;
-    
-    er.result = ER_IGNORED;
-
-    if(ev.when == EV_EARLY || ev.when == EV_LATE) {
-	return er;
-    }
-
-    switch(ev.event) {
-      case EV_KEYPRESS:
-	if (!li->isActive) break;
-
-	switch(ev.u.key) {
-	  case ' ':
-	    if(!(li->flags & NEWT_FLAG_MULTIPLE)) break;
-	    newtListboxSelectItem(co, li->boxItems[li->currItem].data,
-				  NEWT_FLAGS_TOGGLE);
-	    er.result = ER_SWALLOWED;
-	    /* We don't break here, because it is cool to be able to
-	       hold space to select a bunch of items in a list at once */
-
-	  case NEWT_KEY_DOWN:
-	    if(li->numItems <= 0) break;
-	    if(li->currItem < li->numItems - 1) {
-		li->currItem++;
-		if(li->currItem > (li->startShowItem + li->curHeight - 1)) {
-		    li->startShowItem = li->currItem - li->curHeight + 1;
-		    if(li->startShowItem + li->curHeight > li->numItems)
-			li->startShowItem = li->numItems - li->curHeight;
-		}
-		if(li->sb)
-		    newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
-		listboxDraw(co);
-	    }
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_ENTER:
-	    if(li->numItems <= 0) break;
-	    if(li->flags & NEWT_FLAG_RETURNEXIT)
-		er.result = ER_EXITFORM;
-	    break;
-
-	  case NEWT_KEY_UP:
-	    if(li->numItems <= 0) break;
-	    if(li->currItem > 0) {
-		li->currItem--;
-		if(li->currItem < li->startShowItem)
-		    li->startShowItem = li->currItem;
-		if(li->sb)
-		    newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
-		listboxDraw(co);
-	    }
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_PGUP:
-	    if(li->numItems <= 0) break;
-	    li->startShowItem -= li->curHeight - 1;
-	    if(li->startShowItem < 0)
-		li->startShowItem = 0;
-	    li->currItem -= li->curHeight - 1;
-	    if(li->currItem < 0)
-		li->currItem = 0;
-	    newtListboxRealSetCurrent(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_PGDN:
-	    if(li->numItems <= 0) break;
-	    li->startShowItem += li->curHeight;
-	    if(li->startShowItem > (li->numItems - li->curHeight)) {
-		li->startShowItem = li->numItems - li->curHeight;
-	    }
-	    li->currItem += li->curHeight;
-	    if(li->currItem >= li->numItems) {
-		li->currItem = li->numItems - 1;
-	    }
-	    newtListboxRealSetCurrent(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_HOME:
-	    if(li->numItems <= 0) break;
-	    newtListboxSetCurrent(co, 0);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_END:
-	    if(li->numItems <= 0) break;
-	    li->startShowItem = li->numItems - li->curHeight;
-	    if(li->startShowItem < 0)
-		li->startShowItem = 0;
-	    li->currItem = li->numItems - 1;
-	    newtListboxRealSetCurrent(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-	  default:
-	      if (li->numItems <= 0) break;
-              if (ev.u.key < NEWT_KEY_EXTRA_BASE && isalpha(ev.u.key)) {
-		  for(i = 0, item = li->boxItems; item != NULL &&
-			  i < li->currItem; i++, item = item->next);
-
-		  if (item && item->text && (toupper(*item->text) == toupper(ev.u.key))) {
-		      item = item->next;
-		      i++;
-		  } else { 
-		      item = li->boxItems;
-		      i = 0;
-		  }
-		  while (item && item->text &&
-			 toupper(*item->text) != toupper(ev.u.key)) {
-		      item = item->next;
-		      i++;
-		  }
-		  if (item) {
-		      li->currItem = i;
-		      if(li->currItem < li->startShowItem ||
-			 li->currItem > li->startShowItem)
-			  li->startShowItem =
-			      li->currItem > li->numItems - li->curHeight ?
-			      li->startShowItem = li->numItems - li->curHeight :
-			      li->currItem;
-		      if(li->sb)
-			  newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
-		      newtListboxRealSetCurrent(co);
-		      er.result = ER_SWALLOWED;
-		  }
-	      }
-	}
-	break;
-
-      case EV_FOCUS:
-	li->isActive = 1;
-	listboxDraw(co);
-	er.result = ER_SWALLOWED;
-	break;
-
-      case EV_UNFOCUS:
-	li->isActive = 0;
-	listboxDraw(co);
-	er.result = ER_SWALLOWED;
-	break;
-
-      case EV_MOUSE:
-	  /* if this mouse click was within the listbox, make the current
-	     item the item clicked on. */
-	/* Up scroll arrow */
-	if (li->sb &&
-	    ev.u.mouse.x == co->left + co->width - li->bdxAdjust - 1 &&
-	    ev.u.mouse.y == co->top + li->bdyAdjust) {
-	    if(li->numItems <= 0) break;
-	    if(li->currItem > 0) {
-		li->currItem--;
-		if(li->currItem < li->startShowItem)
-		    li->startShowItem = li->currItem;
-		if(li->sb)
-		    newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
-		listboxDraw(co);
-	    }
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    break;
-	}
-	/* Down scroll arrow */
-	if (li->sb &&
-	    ev.u.mouse.x == co->left + co->width - li->bdxAdjust - 1 &&
-	    ev.u.mouse.y == co->top + co->height - li->bdyAdjust - 1) {
-	    if(li->numItems <= 0) break;
-	    if(li->currItem < li->numItems - 1) {
-		li->currItem++;
-		if(li->currItem > (li->startShowItem + li->curHeight - 1)) {
-		    li->startShowItem = li->currItem - li->curHeight + 1;
-		    if(li->startShowItem + li->curHeight > li->numItems)
-			li->startShowItem = li->numItems - li->curHeight;
-		}
-		if(li->sb)
-		    newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
-		listboxDraw(co);
-	    }
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    break;
-	}
-	if ((ev.u.mouse.y >= co->top + li->bdyAdjust) &&
-	    (ev.u.mouse.y <= co->top + co->height - (li->bdyAdjust * 2)) &&
-	    (ev.u.mouse.x >= co->left + li->bdxAdjust) &&
-	    (ev.u.mouse.x <= co->left + co->width + (li->bdxAdjust * 2))) {
-	    li->currItem = li->startShowItem +
-		(ev.u.mouse.y - li->bdyAdjust - co->top);
-	    newtListboxRealSetCurrent(co);
-	    listboxDraw(co);
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    break;
-	}
-    }
-
-    return er;
-}
-
-static void listboxDestroy(newtComponent co) {
-    struct listbox * li = co->data;
-    struct items * item, * nextitem;
-
-    nextitem = item = li->boxItems;
-
-    while (item != NULL) {
-	nextitem = item->next;
-	free(item->text);
-	free(item);
-	item = nextitem;
-    }
-
-    if (li->sb) li->sb->ops->destroy(li->sb);
-
-    free(li);
-    free(co);
-}
diff --git a/mdk-stage1/newt/newt.c b/mdk-stage1/newt/newt.c
deleted file mode 100644
index d6cb3cd96..000000000
--- a/mdk-stage1/newt/newt.c
+++ /dev/null
@@ -1,672 +0,0 @@
-#include <slang.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/signal.h>
-#include <sys/time.h>
-#include <sys/types.h>
-#include <termios.h>
-#include <unistd.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct Window {
-    int height, width, top, left;
-    short * buffer;
-    char * title;
-};
-
-struct keymap {
-    char * str;
-    int code;
-    char * tc;
-};
-
-static struct Window windowStack[20];
-static struct Window * currentWindow = NULL;
-
-static char * helplineStack[20];
-static char ** currentHelpline = NULL;
-
-static int cursorRow, cursorCol;
-static int needResize;
-static int cursorOn = 1;
-
-static const char * defaultHelpLine =
-"  <Tab>/<Alt-Tab> between elements   |  <Space> selects   |  <F12> next screen"
-;
-
-const struct newtColors newtDefaultColorPalette = {
-	  "cyan", "black", 			/* root fg, bg */
-	  "black", "blue",			/* border fg, bg */
-	  "white", "blue",			/* window fg, bg */
-	  "white", "black",			/* shadow fg, bg */
-	  "white", "blue",			/* title fg, bg */
-	  "black", "cyan",			/* button fg, bg */
-	  "yellow", "cyan",			/* active button fg, bg */
-	  "yellow", "blue",			/* checkbox fg, bg */
-	  "blue", "brown",			/* active checkbox fg, bg */
-	  "yellow", "blue",			/* entry box fg, bg */
-	  "white", "blue",			/* label fg, bg */
-	  "black", "cyan",			/* listbox fg, bg */
-	  "yellow", "cyan",			/* active listbox fg, bg */
-	  "white", "blue",			/* textbox fg, bg */
-	  "cyan", "black",			/* active textbox fg, bg */
-	  "white", "blue",			/* help line */
-	  "yellow", "blue",			/* root text */
-	  "blue",					/* scale full */
-	  "red",					/* scale empty */
-	  "blue", "cyan",				/* disabled entry fg, bg */
-	  "white", "blue",			/* compact button fg, bg */
-	  "yellow", "red",			/* active & sel listbox */
-	  "black", "brown"			/* selected listbox */
-};
-
-static const struct keymap keymap[] = {
-	{ "\033OA", 		NEWT_KEY_UP, 		"kh" },
-	{ "\033[A", 		NEWT_KEY_UP, 		"ku" },
-	{ "\033OB", 		NEWT_KEY_DOWN, 		"kd" },
-	{ "\033[B", 		NEWT_KEY_DOWN, 		"kd" },
-	{ "\033[C", 		NEWT_KEY_RIGHT, 	"kr" },
-	{ "\033OC", 		NEWT_KEY_RIGHT, 	"kr" },
-	{ "\033[D", 		NEWT_KEY_LEFT, 		"kl" },
-	{ "\033OD", 		NEWT_KEY_LEFT, 		"kl" },
-	{ "\033[H",		NEWT_KEY_HOME, 		"kh" },
-	{ "\033[1~",		NEWT_KEY_HOME, 		"kh" },
-	{ "\033Ow",		NEWT_KEY_END, 		"kH" },
-	{ "\033[4~",		NEWT_KEY_END, 		"kH" },
-
-	{ "\033[3~",		NEWT_KEY_DELETE,	"kl" },
-	{ "\033[2~", 		NEWT_KEY_INSERT,	NULL },
-
-	{ "\033\t",		NEWT_KEY_UNTAB,		NULL },
-
-	{ "\033[5~",		NEWT_KEY_PGUP,		NULL },
-	{ "\033[6~",		NEWT_KEY_PGDN,		NULL },
-	{ "\033V",		NEWT_KEY_PGUP, 		"kH" },
-	{ "\033v",		NEWT_KEY_PGUP, 		"kH" },
-
-	{ "\033[[A",		NEWT_KEY_F1,		NULL },
-	{ "\033[[B",		NEWT_KEY_F2,		NULL },
-	{ "\033[[C",		NEWT_KEY_F3,		NULL },
-	{ "\033[[D",		NEWT_KEY_F4,		NULL },
-	{ "\033[[E",		NEWT_KEY_F5,		NULL },
-
-	{ "\033OP",		NEWT_KEY_F1,		NULL },
-	{ "\033OQ",		NEWT_KEY_F2,		NULL },
-	{ "\033OR",		NEWT_KEY_F3,		NULL },
-	{ "\033OS",		NEWT_KEY_F4,		NULL },
-
-	{ "\033[11~",		NEWT_KEY_F1,		NULL },
-	{ "\033[12~",		NEWT_KEY_F2,		NULL },
-	{ "\033[13~",		NEWT_KEY_F3,		NULL },
-	{ "\033[14~",		NEWT_KEY_F4,		NULL },
-	{ "\033[15~",		NEWT_KEY_F5,		NULL },
-	{ "\033[17~",		NEWT_KEY_F6,		NULL },
-	{ "\033[18~",		NEWT_KEY_F7,		NULL },
-	{ "\033[19~",		NEWT_KEY_F8,		NULL },
-	{ "\033[20~",		NEWT_KEY_F9,		NULL },
-	{ "\033[21~",		NEWT_KEY_F10,		NULL },
-	{ "\033[23~",		NEWT_KEY_F11,		NULL },
-	{ "\033[24~",		NEWT_KEY_F12,		NULL },
-
-	{ NULL, 	0, 			NULL },	/* LEAVE this one */
-};
-static char keyPrefix = '\033';
-
-static const char * version = "Newt windowing library version " VERSION
-			" - (C) 1996-2000 Red Hat Software. "
-		        "Redistributable under the term of the Library "
-		        "GNU Public License. "
-			"Written by Erik Troan\n";
-
-static newtSuspendCallback suspendCallback = NULL;
-static void * suspendCallbackData = NULL;
-
-void newtSetSuspendCallback(newtSuspendCallback cb, void * data) {
-    suspendCallback = cb;
-    suspendCallbackData = data;
-}
-
-static void handleSigwinch(int signum __attribute__ ((unused))) {
-    needResize = 1;
-}
-
-static int getkeyInterruptHook(void) {
-    return -1;
-}
-
-void newtFlushInput(void) {
-    while (SLang_input_pending(0)) {
-	SLang_getkey();
-    }
-}
-
-void newtRefresh(void) {
-    SLsmg_refresh();
-}
-
-void newtSuspend(void) {
-    SLtt_set_cursor_visibility (1);
-    SLsmg_suspend_smg();
-    SLang_reset_tty();
-    SLtt_set_cursor_visibility (cursorOn);
-}
-
-void newtResume(void) {
-    SLsmg_resume_smg ();
-    SLsmg_refresh();
-    SLang_init_tty(0, 0, 0);
-}
-
-void newtCls(void) {
-    SLsmg_set_color(NEWT_COLORSET_ROOT);
-    SLsmg_gotorc(0, 0);
-    SLsmg_erase_eos();
-
-    newtRefresh();
-}
-
-#if defined(THIS_DOESNT_WORK)
-void newtResizeScreen(int redraw) {
-    newtPushHelpLine("");
-
-    SLtt_get_screen_size();
-    SLang_init_tty(0, 0, 0);
-
-    SLsmg_touch_lines (0, SLtt_Screen_Rows - 1);
-
-    /* I don't know why I need this */
-    SLsmg_refresh();
-
-    newtPopHelpLine();
-
-    if (redraw)
-	SLsmg_refresh();
-}
-#endif
-
-int newtInit(void) {
-    char * MonoValue, * MonoEnv = "NEWT_MONO";
-
-    /* use the version variable just to be sure it gets included */
-    strlen(version);
-
-    SLtt_get_terminfo();
-    SLtt_get_screen_size();
-
-    MonoValue = getenv(MonoEnv);
-    if ( MonoValue == NULL ) {
-	SLtt_Use_Ansi_Colors = 1;
-    } else {
-	SLtt_Use_Ansi_Colors = 0;
-    }
-
-    SLsmg_init_smg();
-    SLang_init_tty(0, 0, 0);
-
-    newtSetColors(newtDefaultColorPalette);
-    newtCursorOff();
-    /*initKeymap();*/
-
-    /*memset(&sa, 0, sizeof(sa));
-    sa.sa_handler = handleSigwinch;
-    sigaction(SIGWINCH, &sa, NULL);*/
-
-    SLsignal_intr(SIGWINCH, handleSigwinch);
-    SLang_getkey_intr_hook = getkeyInterruptHook;
-
-
-
-    return 0;
-}
-
-int newtFinished(void) {
-    SLsmg_gotorc(SLtt_Screen_Rows - 1, 0);
-    newtCursorOn();
-    SLsmg_refresh();
-    SLsmg_reset_smg();
-    SLang_reset_tty();
-
-    return 0;
-}
-
-void newtSetColors(struct newtColors colors) {
-    SLtt_set_color(NEWT_COLORSET_ROOT, "", colors.rootFg, colors.rootBg);
-    SLtt_set_color(NEWT_COLORSET_BORDER, "", colors.borderFg, colors.borderBg);
-    SLtt_set_color(NEWT_COLORSET_WINDOW, "", colors.windowFg, colors.windowBg);
-    SLtt_set_color(NEWT_COLORSET_SHADOW, "", colors.shadowFg, colors.shadowBg);
-    SLtt_set_color(NEWT_COLORSET_TITLE, "", colors.titleFg, colors.titleBg);
-    SLtt_set_color(NEWT_COLORSET_BUTTON, "", colors.buttonFg, colors.buttonBg);
-    SLtt_set_color(NEWT_COLORSET_ACTBUTTON, "", colors.actButtonFg,
-			colors.actButtonBg);
-    SLtt_set_color(NEWT_COLORSET_CHECKBOX, "", colors.checkboxFg,
-			colors.checkboxBg);
-    SLtt_set_color(NEWT_COLORSET_ACTCHECKBOX, "", colors.actCheckboxFg,
-			colors.actCheckboxBg);
-    SLtt_set_color(NEWT_COLORSET_ENTRY, "", colors.entryFg, colors.entryBg);
-    SLtt_set_color(NEWT_COLORSET_LABEL, "", colors.labelFg, colors.labelBg);
-    SLtt_set_color(NEWT_COLORSET_LISTBOX, "", colors.listboxFg,
-			colors.listboxBg);
-    SLtt_set_color(NEWT_COLORSET_ACTLISTBOX, "", colors.actListboxFg,
-			colors.actListboxBg);
-    SLtt_set_color(NEWT_COLORSET_TEXTBOX, "", colors.textboxFg,
-			colors.textboxBg);
-    SLtt_set_color(NEWT_COLORSET_ACTTEXTBOX, "", colors.actTextboxFg,
-			colors.actTextboxBg);
-    SLtt_set_color(NEWT_COLORSET_HELPLINE, "", colors.helpLineFg,
-			colors.helpLineBg);
-    SLtt_set_color(NEWT_COLORSET_ROOTTEXT, "", colors.rootTextFg,
-			colors.rootTextBg);
-
-    SLtt_set_color(NEWT_COLORSET_EMPTYSCALE, "", "black",
-			colors.emptyScale);
-    SLtt_set_color(NEWT_COLORSET_FULLSCALE, "", "black",
-			colors.fullScale);
-    SLtt_set_color(NEWT_COLORSET_DISENTRY, "", colors.disabledEntryFg,
-			colors.disabledEntryBg);
-
-    SLtt_set_color(NEWT_COLORSET_COMPACTBUTTON, "", colors.compactButtonFg,
-			colors.compactButtonBg);
-
-    SLtt_set_color(NEWT_COLORSET_ACTSELLISTBOX, "", colors.actSelListboxFg,
-		   colors.actSelListboxBg);
-    SLtt_set_color(NEWT_COLORSET_SELLISTBOX, "", colors.selListboxFg,
-		   colors.selListboxBg);
-}
-
-int newtGetKey(void) {
-    int key;
-    char buf[10], * chptr = buf;
-    const struct keymap * curr;
-
-    do {
-	key = SLang_getkey();
-	if (key == 0xFFFF) {
-	    if (needResize)
-		return NEWT_KEY_RESIZE;
-
-	    /* ignore other signals */
-	    continue;
-	}
-
-	if (key == NEWT_KEY_SUSPEND && suspendCallback)
-	    suspendCallback(suspendCallbackData);
-    } while (key == NEWT_KEY_SUSPEND);
-
-    switch (key) {
-      case 'v' | 0x80:
-      case 'V' | 0x80:
-	return NEWT_KEY_PGUP;
-
-      case 22:
-	return NEWT_KEY_PGDN;
-
-	return NEWT_KEY_BKSPC;
-      case 0x7f:
-	return NEWT_KEY_BKSPC;
-
-      case 0x08:
-	return NEWT_KEY_BKSPC;
-
-      default:
-	if (key != keyPrefix) return key;
-    }
-
-    memset(buf, 0, sizeof(buf));
-
-    *chptr++ = key;
-    while (SLang_input_pending(5)) {
-	key = SLang_getkey();
-	if (key == keyPrefix) {
-	    /* he hit unknown keys too many times -- start over */
-	    memset(buf, 0, sizeof(buf));
-	    chptr = buf;
-	}
-
-	*chptr++ = key;
-
-	/* this search should use bsearch(), but when we only look through
-	   a list of 20 (or so) keymappings, it's probably faster just to
-	   do a inline linear search */
-
-	for (curr = keymap; curr->code; curr++) {
-	    if (curr->str) {
-		if (!strcmp(curr->str, buf))
-		    return curr->code;
-	    }
-	}
-    }
-
-    for (curr = keymap; curr->code; curr++) {
-	if (curr->str) {
-	    if (!strcmp(curr->str, buf))
-		return curr->code;
-	}
-    }
-
-    /* Looks like we were a bit overzealous in reading characters. Return
-       just the first character, and put everything else back in the buffer
-       for later */
-
-    chptr--;
-    while (chptr > buf)
-	SLang_ungetkey(*chptr--);
-
-    return *chptr;
-}
-
-void newtWaitForKey(void) {
-    newtRefresh();
-
-    SLang_getkey();
-    newtClearKeyBuffer();
-}
-
-void newtClearKeyBuffer(void) {
-    while (SLang_input_pending(1)) {
-	SLang_getkey();
-    }
-}
-
-int newtOpenWindow(int left, int top, int width, int height,
-			  const char * title) {
-    int j, row, col;
-    int n;
-    int i;
-
-    newtFlushInput();
-
-    if (!currentWindow) {
-	currentWindow = windowStack;
-    } else {
-	currentWindow++;
-    }
-
-    currentWindow->left = left;
-    currentWindow->top = top;
-    currentWindow->width = width;
-    currentWindow->height = height;
-    currentWindow->title = title ? strdup(title) : NULL;
-
-    currentWindow->buffer = malloc(sizeof(short) * (width + 3) * (height + 3));
-
-    row = top - 1;
-    col = left - 1;
-    n = 0;
-    for (j = 0; j < height + 3; j++, row++) {
-	SLsmg_gotorc(row, col);
-	SLsmg_read_raw(currentWindow->buffer + n,
-				currentWindow->width + 3);
-	n += currentWindow->width + 3;
-    }
-
-    SLsmg_set_color(NEWT_COLORSET_BORDER);
-    SLsmg_draw_box(top - 1, left - 1, height + 2, width + 2);
-
-    if (currentWindow->title) {
-	i = strlen(currentWindow->title) + 4;
-	i = ((width - i) / 2) + left;
-	SLsmg_gotorc(top - 1, i);
-	SLsmg_set_char_set(1);
-	SLsmg_write_char(SLSMG_RTEE_CHAR);
-	SLsmg_set_char_set(0);
-	SLsmg_write_char(' ');
-	SLsmg_set_color(NEWT_COLORSET_TITLE);
-	SLsmg_write_string((char *)currentWindow->title);
-	SLsmg_set_color(NEWT_COLORSET_BORDER);
-	SLsmg_write_char(' ');
-	SLsmg_set_char_set(1);
-	SLsmg_write_char(SLSMG_LTEE_CHAR);
-	SLsmg_set_char_set(0);
-    }
-
-    SLsmg_set_color(NEWT_COLORSET_WINDOW);
-    SLsmg_fill_region(top, left, height, width, ' ');
-
-    SLsmg_set_color(NEWT_COLORSET_SHADOW);
-    SLsmg_fill_region(top + height + 1, left, 1, width + 2, ' ');
-    SLsmg_fill_region(top, left + width + 1, height + 1, 1, ' ');
-
-    for (i = top; i < (top + height + 1); i++) {
-	SLsmg_gotorc(i, left + width + 1);
-	SLsmg_write_string(" ");
-    }
-
-    return 0;
-}
-
-int newtCenteredWindow(int width, int height, const char * title) {
-    int top, left;
-
-    top = (SLtt_Screen_Rows - height) / 2;
-
-    /* I don't know why, but this seems to look better */
-    if ((SLtt_Screen_Rows % 2) && (top % 2)) top--;
-
-    left = (SLtt_Screen_Cols - width) / 2;
-
-    newtOpenWindow(left, top, width, height, title);
-
-    return 0;
-}
-
-void newtPopWindow(void) {
-    int j, row, col;
-    int n = 0;
-
-    row = col = 0;
-
-    row = currentWindow->top - 1;
-    col = currentWindow->left - 1;
-    for (j = 0; j < currentWindow->height + 3; j++, row++) {
-	SLsmg_gotorc(row, col);
-	SLsmg_write_raw(currentWindow->buffer + n,
-				currentWindow->width + 3);
-	n += currentWindow->width + 3;
-    }
-
-    free(currentWindow->buffer);
-    free(currentWindow->title);
-
-    if (currentWindow == windowStack)
-	currentWindow = NULL;
-    else
-	currentWindow--;
-
-    SLsmg_set_char_set(0);
-
-    newtRefresh();
-}
-
-void newtGetWindowPos(int * x, int * y) {
-    if (currentWindow) {
-	*x = currentWindow->left;
-	*y = currentWindow->top;
-    } else
-	*x = *y = 0;
-}
-
-void newtGetrc(int * row, int * col) {
-   *row = cursorRow;
-   *col = cursorCol;
-}
-
-void newtGotorc(int newRow, int newCol) {
-    if (currentWindow) {
-	newRow += currentWindow->top;
-	newCol += currentWindow->left;
-    }
-
-    cursorRow = newRow;
-    cursorCol = newCol;
-    SLsmg_gotorc(cursorRow, cursorCol);
-}
-
-void newtDrawBox(int left, int top, int width, int height, int shadow) {
-    if (currentWindow) {
-	top += currentWindow->top;
-	left += currentWindow->left;
-    }
-
-    SLsmg_draw_box(top, left, height, width);
-
-    if (shadow) {
-	SLsmg_set_color(NEWT_COLORSET_SHADOW);
-	SLsmg_fill_region(top + height, left + 1, 1, width - 1, ' ');
-	SLsmg_fill_region(top + 1, left + width, height, 1, ' ');
-    }
-}
-
-void newtClearBox(int left, int top, int width, int height) {
-    if (currentWindow) {
-	top += currentWindow->top;
-	left += currentWindow->left;
-    }
-
-    SLsmg_fill_region(top, left, height, width, ' ');
-}
-
-#if 0
-/* This doesn't seem to work quite right. I don't know why not, but when
-   I rsh from an rxvt into a box and run this code, the machine returns
-   console key's (\033[B) rather then xterm ones (\033OB). */
-static void initKeymap(void) {
-    struct keymap * curr;
-
-    for (curr = keymap; curr->code; curr++) {
-	if (!curr->str)
-	    curr->str = SLtt_tgetstr(curr->tc);
-    }
-
-    /* Newt's keymap handling is a bit broken. It assumes that any extended
-       keystrokes begin with ESC. If you're using a homebrek terminal you
-       will probably need to fix this, or just yell at me and I'll be so
-       ashamed of myself for doing it this way I'll fix it */
-
-    keyPrefix = 0x1b;		/* ESC */
-}
-#endif
-
-void newtDelay(int usecs) {
-    fd_set set;
-    struct timeval tv;
-
-    FD_ZERO(&set);
-
-    tv.tv_sec = usecs / 1000000;
-    tv.tv_usec = usecs % 1000000;
-
-    select(0, &set, &set, &set, &tv);
-}
-
-struct eventResult newtDefaultEventHandler(newtComponent c __attribute__ ((unused)),
-					   struct event ev __attribute__ ((unused))) {
-    struct eventResult er;
-
-    er.result = ER_IGNORED;
-    return er;
-}
-
-void newtRedrawHelpLine(void) {
-    char * buf;
-
-    SLsmg_set_color(NEWT_COLORSET_HELPLINE);
-
-    buf = alloca(SLtt_Screen_Cols + 1);
-    memset(buf, ' ', SLtt_Screen_Cols);
-    buf[SLtt_Screen_Cols] = '\0';
-
-    if (currentHelpline)
-	memcpy(buf, *currentHelpline, strlen(*currentHelpline));
-
-    SLsmg_gotorc(SLtt_Screen_Rows - 1, 0);
-    SLsmg_write_string(buf);
-}
-
-void newtPushHelpLine(const char * text) {
-    if (!text)
-	text = defaultHelpLine;
-
-    if (currentHelpline)
-	(*(++currentHelpline)) = strdup(text);
-    else {
-	currentHelpline = helplineStack;
-	*currentHelpline = strdup(text);
-    }
-
-    newtRedrawHelpLine();
-}
-
-void newtPopHelpLine(void) {
-    if (!currentHelpline) return;
-
-    free(*currentHelpline);
-    if (currentHelpline == helplineStack)
-	currentHelpline = NULL;
-    else
-	currentHelpline--;
-
-    newtRedrawHelpLine();
-}
-
-void newtDrawRootText(int col, int row, const char * text) {
-    SLsmg_set_color(NEWT_COLORSET_ROOTTEXT);
-
-    if (col < 0) {
-	col = SLtt_Screen_Cols + col;
-    }
-
-    if (row < 0) {
-	row = SLtt_Screen_Rows + row;
-    }
-
-    SLsmg_gotorc(row, col);
-    SLsmg_write_string((char *)text);
-}
-
-int newtSetFlags(int oldFlags, int newFlags, enum newtFlagsSense sense) {
-    switch (sense) {
-      case NEWT_FLAGS_SET:
-	return oldFlags | newFlags;
-
-      case NEWT_FLAGS_RESET:
-	return oldFlags & (~newFlags);
-
-      case NEWT_FLAGS_TOGGLE:
-	return oldFlags ^ newFlags;
-
-      default:
-	return oldFlags;
-    }
-}
-
-void newtBell(void)
-{
-    SLtt_beep();
-}
-
-void newtGetScreenSize(int * cols, int * rows) {
-    if (rows) *rows = SLtt_Screen_Rows;
-    if (cols) *cols = SLtt_Screen_Cols;
-}
-
-void newtDefaultPlaceHandler(newtComponent c, int newLeft, int newTop) {
-    c->left = newLeft;
-    c->top = newTop;
-}
-
-void newtDefaultMappedHandler(newtComponent c, int isMapped) {
-    c->isMapped = isMapped;
-}
-
-void newtCursorOff(void) {
-    cursorOn = 0;
-    SLtt_set_cursor_visibility (cursorOn);
-}
-
-void newtCursorOn(void) {
-    cursorOn = 1;
-    SLtt_set_cursor_visibility (cursorOn);
-}
diff --git a/mdk-stage1/newt/newt.h b/mdk-stage1/newt/newt.h
deleted file mode 100644
index d3fd8bedc..000000000
--- a/mdk-stage1/newt/newt.h
+++ /dev/null
@@ -1,362 +0,0 @@
-#ifndef H_NEWT
-#define H_NEWT
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <stdarg.h>
-
-#define NEWT_COLORSET_ROOT 		2
-#define NEWT_COLORSET_BORDER 		3
-#define NEWT_COLORSET_WINDOW		4
-#define NEWT_COLORSET_SHADOW		5
-#define NEWT_COLORSET_TITLE		6
-#define NEWT_COLORSET_BUTTON		7
-#define NEWT_COLORSET_ACTBUTTON		8
-#define NEWT_COLORSET_CHECKBOX		9
-#define NEWT_COLORSET_ACTCHECKBOX	10
-#define NEWT_COLORSET_ENTRY		11
-#define NEWT_COLORSET_LABEL		12
-#define NEWT_COLORSET_LISTBOX		13
-#define NEWT_COLORSET_ACTLISTBOX	14
-#define NEWT_COLORSET_TEXTBOX		15
-#define NEWT_COLORSET_ACTTEXTBOX	16
-#define NEWT_COLORSET_HELPLINE		17
-#define NEWT_COLORSET_ROOTTEXT		18
-#define NEWT_COLORSET_EMPTYSCALE	19
-#define NEWT_COLORSET_FULLSCALE		20
-#define NEWT_COLORSET_DISENTRY		21
-#define NEWT_COLORSET_COMPACTBUTTON	22
-#define NEWT_COLORSET_ACTSELLISTBOX	23
-#define NEWT_COLORSET_SELLISTBOX	24
-
-#define NEWT_ARG_LAST			-100000
-#define NEWT_ARG_APPEND			-1
-
-struct newtColors {
-    char * rootFg, * rootBg;
-    char * borderFg, * borderBg;
-    char * windowFg, * windowBg;
-    char * shadowFg, * shadowBg;
-    char * titleFg, * titleBg;
-    char * buttonFg, * buttonBg;
-    char * actButtonFg, * actButtonBg;
-    char * checkboxFg, * checkboxBg;
-    char * actCheckboxFg, * actCheckboxBg;
-    char * entryFg, * entryBg;
-    char * labelFg, * labelBg;
-    char * listboxFg, * listboxBg;
-    char * actListboxFg, * actListboxBg;
-    char * textboxFg, * textboxBg;
-    char * actTextboxFg, * actTextboxBg;
-    char * helpLineFg, * helpLineBg;
-    char * rootTextFg, * rootTextBg;
-    char * emptyScale, * fullScale;
-    char * disabledEntryFg, * disabledEntryBg;
-    char * compactButtonFg, * compactButtonBg;
-    char * actSelListboxFg, * actSelListboxBg;
-    char * selListboxFg, * selListboxBg;
-};
-
-enum newtFlagsSense { NEWT_FLAGS_SET, NEWT_FLAGS_RESET, NEWT_FLAGS_TOGGLE };
-
-#define NEWT_FLAG_RETURNEXIT 	(1 << 0)
-#define NEWT_FLAG_HIDDEN 	(1 << 1)
-#define NEWT_FLAG_SCROLL 	(1 << 2)
-#define NEWT_FLAG_DISABLED 	(1 << 3)
-/* OBSOLETE #define NEWT_FLAG_NOSCROLL 	(1 << 4)	for listboxes */
-#define NEWT_FLAG_BORDER	(1 << 5)
-#define NEWT_FLAG_WRAP		(1 << 6)
-#define NEWT_FLAG_NOF12		(1 << 7)
-#define NEWT_FLAG_MULTIPLE      (1 << 8)
-#define NEWT_FLAG_SELECTED	(1 << 9)
-#define NEWT_FLAG_CHECKBOX	(1 << 10)
-#define NEWT_FLAG_PASSWORD      (1 << 11)  /* draw '*'  of chars in entrybox */
-#define NEWT_FD_READ		(1 << 0)
-#define NEWT_FD_WRITE		(1 << 1)
-
-#define NEWT_CHECKBOXTREE_COLLAPSED	'\0'
-#define NEWT_CHECKBOXTREE_EXPANDED	'\1'
-#define NEWT_CHECKBOXTREE_UNSELECTED	' '
-#define NEWT_CHECKBOXTREE_SELECTED	'*'
-
-/* Backwards compatibility */
-#define NEWT_LISTBOX_RETURNEXIT NEWT_FLAG_RETURNEXIT
-#define NEWT_ENTRY_SCROLL	NEWT_FLAG_SCROLL
-#define NEWT_ENTRY_HIDDEN	NEWT_FLAG_HIDDEN
-#define NEWT_ENTRY_RETURNEXIT	NEWT_FLAG_RETURNEXIT
-#define NEWT_ENTRY_DISABLED	NEWT_FLAG_DISABLED
-
-#define NEWT_TEXTBOX_WRAP	NEWT_FLAG_WRAP
-#define NEWT_TEXTBOX_SCROLL	NEWT_FLAG_SCROLL
-#define NEWT_FORM_NOF12		NEWT_FLAG_NOF12
-
-#define newtListboxAddEntry	newtListboxAppendEntry
-
-
-typedef struct newtComponent_struct * newtComponent;
-
-extern const struct newtColors newtDefaultColorPalette;
-
-typedef void (*newtCallback)(newtComponent, void *);
-typedef void (*newtSuspendCallback)(void * data);
-
-int newtInit(void);
-int newtFinished(void);
-void newtCls(void);
-void newtResizeScreen(int redraw);
-void newtWaitForKey(void);
-void newtClearKeyBuffer(void);
-void newtDelay(int usecs);
-/* top, left are *not* counting the border */
-int newtOpenWindow(int left, int top, int width, int height, 
-			  const char * title);
-int newtCenteredWindow(int width, int height, const char * title);
-void newtPopWindow(void);
-void newtSetColors(struct newtColors colors);
-void newtRefresh(void);
-void newtSuspend(void);
-void newtSetSuspendCallback(newtSuspendCallback cb, void * data);
-void newtSetHelpCallback(newtCallback cb);
-void newtResume(void);
-void newtPushHelpLine(const char * text);
-void newtRedrawHelpLine(void);
-void newtPopHelpLine(void);
-void newtDrawRootText(int col, int row, const char * text);
-void newtBell(void);
-void newtCursorOff(void);
-void newtCursorOn(void);
-
-/* Components */
-
-newtComponent newtCompactButton(int left, int top, const char * text);
-newtComponent newtButton(int left, int top, const char * text);
-newtComponent newtCheckbox(int left, int top, const char * text, char defValue,
-			   const char * seq, char * result);
-char newtCheckboxGetValue(newtComponent co);
-void newtCheckboxSetValue(newtComponent co, char value);
-void newtCheckboxSetFlags(newtComponent co, int flags, enum newtFlagsSense sense);
-
-    
-newtComponent newtRadiobutton(int left, int top, const char * text, int isDefault,
-			      newtComponent prevButton);
-newtComponent newtRadioGetCurrent(newtComponent setMember);
-newtComponent newtListitem(int left, int top, const char * text, int isDefault,
-			      newtComponent prevItem, const void * data, int flags);
-void newtListitemSet(newtComponent co, const char * text);
-void * newtListitemGetData(newtComponent co);
-void newtGetScreenSize(int * cols, int * rows);
-
-newtComponent newtLabel(int left, int top, const char * text);
-void newtLabelSetText(newtComponent co, const char * text);
-newtComponent newtVerticalScrollbar(int left, int top, int height,
-				    int normalColorset, int thumbColorset);
-void newtScrollbarSet(newtComponent co, int where, int total);
-
-newtComponent newtListbox(int left, int top, int height, int flags);
-void * newtListboxGetCurrent(newtComponent co);
-void newtListboxSetCurrent(newtComponent co, int num);
-void newtListboxSetCurrentByKey(newtComponent co, void * key);
-void newtListboxSetEntry(newtComponent co, int num, const char * text);
-void newtListboxSetWidth(newtComponent co, int width);
-void newtListboxSetData(newtComponent co, int num, void * data);
-int newtListboxAppendEntry(newtComponent co, const char * text, 
-			   const void * data);
-/* Send the key to insert after, or NULL to insert at the top */
-int newtListboxInsertEntry(newtComponent co, const char * text, const void * data, void * key);
-int newtListboxDeleteEntry(newtComponent co, void * data);
-void newtListboxClear(newtComponent co); /* removes all entries from listbox */
-void newtListboxGetEntry(newtComponent co, int num, char **text, void **data);
-/* Returns an array of data pointers from items, last element is NULL */
-void **newtListboxGetSelection(newtComponent co, int *numitems);
-void newtListboxClearSelection(newtComponent co);
-void newtListboxSelectItem(newtComponent co, const void * key,
-	enum newtFlagsSense sense);
-
-newtComponent newtCheckboxTree(int left, int top, int height, int flags);
-newtComponent newtCheckboxTreeMulti(int left, int top, int height, char *seq, int flags);
-const void ** newtCheckboxTreeGetSelection(newtComponent co, int *numitems);
-const void * newtCheckboxTreeGetCurrent(newtComponent co);
-const void ** newtCheckboxTreeGetMultiSelection(newtComponent co, int *numitems, char seqnum);
-/* last item is NEWT_ARG_LAST for all of these */
-int newtCheckboxTreeAddItem(newtComponent co, 
-			    const char * text, const void * data,
-			    int flags, int index, ...);
-int newtCheckboxTreeAddArray(newtComponent co, 
-			     const char * text, const void * data,
-			     int flags, int * indexes);
-int * newtCheckboxTreeFindItem(newtComponent co, void * data);
-void newtCheckboxTreeSetEntry(newtComponent co, const void * data,
-			      const char * text);
-char newtCheckboxTreeGetEntryValue(newtComponent co, const void * data);
-void newtCheckboxTreeSetEntryValue(newtComponent co, const void * data,
-				   char value);
-    
-newtComponent newtTextboxReflowed(int left, int top, char * text, int width,
-				  int flexDown, int flexUp, int flags);
-newtComponent newtTextbox(int left, int top, int width, int height, int flags);
-void newtTextboxSetText(newtComponent co, const char * text);
-void newtTextboxSetHeight(newtComponent co, int height);
-int newtTextboxGetNumLines(newtComponent co);
-char * newtReflowText(char * text, int width, int flexDown, int flexUp,
-		      int * actualWidth, int * actualHeight);
-
-struct newtExitStruct {
-    enum { NEWT_EXIT_HOTKEY, NEWT_EXIT_COMPONENT, NEWT_EXIT_FDREADY,
-	   NEWT_EXIT_TIMER } reason;
-    union {
-	int key;
-	newtComponent co;
-    } u;
-} ;
-
-newtComponent newtForm(newtComponent vertBar, void * helpTag, int flags);
-void newtFormSetTimer(newtComponent form, int millisecs);
-void newtFormWatchFd(newtComponent form, int fd, int fdFlags);
-void newtFormSetSize(newtComponent co);
-newtComponent newtFormGetCurrent(newtComponent co);
-void newtFormSetBackground(newtComponent co, int color);
-void newtFormSetCurrent(newtComponent co, newtComponent subco);
-void newtFormAddComponent(newtComponent form, newtComponent co);
-void newtFormAddComponents(newtComponent form, ...);
-void newtFormSetHeight(newtComponent co, int height);
-void newtFormSetWidth(newtComponent co, int width);
-newtComponent newtRunForm(newtComponent form);		/* obsolete */
-void newtFormRun(newtComponent co, struct newtExitStruct * es);
-void newtDrawForm(newtComponent form);
-void newtFormAddHotKey(newtComponent co, int key);
-
-typedef int (*newtEntryFilter)(newtComponent entry, void * data, int ch,
-			       int cursor);
-newtComponent newtEntry(int left, int top, const char * initialValue, int width,
-			char ** resultPtr, int flags);
-void newtEntrySet(newtComponent co, const char * value, int cursorAtEnd);
-void newtEntrySetFilter(newtComponent co, newtEntryFilter filter, void * data);
-char * newtEntryGetValue(newtComponent co);
-void newtEntrySetFlags(newtComponent co, int flags, enum newtFlagsSense sense);
-
-newtComponent newtScale(int left, int top, int width, int fullValue);
-void newtScaleSet(newtComponent co, unsigned int amount);
-
-void newtComponentAddCallback(newtComponent co, newtCallback f, void * data);
-void newtComponentTakesFocus(newtComponent co, int val);
-
-/* this also destroys all of the components (including other forms) on the 
-   form */
-void newtFormDestroy(newtComponent form);	
-
-/* Key codes */
-
-#define NEWT_KEY_TAB			'\t'
-#define NEWT_KEY_ENTER			'\r'
-#define NEWT_KEY_SUSPEND		'\032'			/* ctrl - z*/
-#define NEWT_KEY_RETURN			NEWT_KEY_ENTER
-
-#define NEWT_KEY_EXTRA_BASE		0x8000
-#define NEWT_KEY_UP			NEWT_KEY_EXTRA_BASE + 1
-#define NEWT_KEY_DOWN			NEWT_KEY_EXTRA_BASE + 2
-#define NEWT_KEY_LEFT			NEWT_KEY_EXTRA_BASE + 4
-#define NEWT_KEY_RIGHT			NEWT_KEY_EXTRA_BASE + 5
-#define NEWT_KEY_BKSPC			NEWT_KEY_EXTRA_BASE + 6
-#define NEWT_KEY_DELETE			NEWT_KEY_EXTRA_BASE + 7
-#define NEWT_KEY_HOME			NEWT_KEY_EXTRA_BASE + 8
-#define NEWT_KEY_END			NEWT_KEY_EXTRA_BASE + 9
-#define NEWT_KEY_UNTAB			NEWT_KEY_EXTRA_BASE + 10
-#define NEWT_KEY_PGUP			NEWT_KEY_EXTRA_BASE + 11
-#define NEWT_KEY_PGDN			NEWT_KEY_EXTRA_BASE + 12
-#define NEWT_KEY_INSERT			NEWT_KEY_EXTRA_BASE + 13
-
-#define NEWT_KEY_F1			NEWT_KEY_EXTRA_BASE + 101
-#define NEWT_KEY_F2			NEWT_KEY_EXTRA_BASE + 102
-#define NEWT_KEY_F3			NEWT_KEY_EXTRA_BASE + 103
-#define NEWT_KEY_F4			NEWT_KEY_EXTRA_BASE + 104
-#define NEWT_KEY_F5			NEWT_KEY_EXTRA_BASE + 105
-#define NEWT_KEY_F6			NEWT_KEY_EXTRA_BASE + 106
-#define NEWT_KEY_F7			NEWT_KEY_EXTRA_BASE + 107
-#define NEWT_KEY_F8			NEWT_KEY_EXTRA_BASE + 108
-#define NEWT_KEY_F9			NEWT_KEY_EXTRA_BASE + 109
-#define NEWT_KEY_F10			NEWT_KEY_EXTRA_BASE + 110
-#define NEWT_KEY_F11			NEWT_KEY_EXTRA_BASE + 111
-#define NEWT_KEY_F12			NEWT_KEY_EXTRA_BASE + 112
-
-/* not really a key, but newtGetKey returns it */
-#define NEWT_KEY_RESIZE			NEWT_KEY_EXTRA_BASE + 113
-
-#define NEWT_ANCHOR_LEFT		(1 << 0)
-#define NEWT_ANCHOR_RIGHT		(1 << 1)
-#define NEWT_ANCHOR_TOP			(1 << 2)
-#define NEWT_ANCHOR_BOTTOM		(1 << 3)
-
-#define NEWT_GRID_FLAG_GROWX		(1 << 0)
-#define NEWT_GRID_FLAG_GROWY		(1 << 1)
-
-typedef struct grid_s * newtGrid;
-enum newtGridElement { NEWT_GRID_EMPTY = 0,
-		       NEWT_GRID_COMPONENT, NEWT_GRID_SUBGRID };
-
-newtGrid newtCreateGrid(int cols, int rows);
-/* TYPE, what, TYPE, what, ..., NULL */
-newtGrid newtGridVStacked(enum newtGridElement type, void * what, ...);
-newtGrid newtGridVCloseStacked(enum newtGridElement type, void * what, ...);
-newtGrid newtGridHStacked(enum newtGridElement type1, void * what1, ...);
-newtGrid newtGridHCloseStacked(enum newtGridElement type1, void * what1, ...);
-newtGrid newtGridBasicWindow(newtComponent text, newtGrid middle,
-			     newtGrid buttons);
-newtGrid newtGridSimpleWindow(newtComponent text, newtComponent middle,
-			     newtGrid buttons);
-void newtGridSetField(newtGrid grid, int col, int row, 
-		      enum newtGridElement type, void * val, int padLeft,
-		      int padTop, int padRight, int padBottom, int anchor,
-		      int flags);
-void newtGridPlace(newtGrid grid, int left, int top);
-#define newtGridDestroy newtGridFree
-void newtGridFree(newtGrid grid, int recurse);
-void newtGridGetSize(newtGrid grid, int * width, int * height);
-void newtGridWrappedWindow(newtGrid grid, char * title);
-void newtGridWrappedWindowAt(newtGrid grid, char * title, int left, int top);
-void newtGridAddComponentsToForm(newtGrid grid, newtComponent form, 
-				 int recurse);
-
-/* convienve */
-newtGrid newtButtonBarv(char * button1, newtComponent * b1comp, va_list args);
-newtGrid newtButtonBar(char * button1, newtComponent * b1comp, ...);
-
-/* automatically centered and shrink wrapped */
-void newtWinMessage(char * title, char * buttonText, char * text, ...);
-void newtWinMessagev(char * title, char * buttonText, char * text, 
-		     va_list argv);
-
-/* having separate calls for these two seems silly, but having two separate
-   variable length-arg lists seems like a bad idea as well */
-
-/* Returns 0 if F12 was pressed, 1 for button1, 2 for button2 */
-int newtWinChoice(char * title, char * button1, char * button2, 
-		   char * text, ...);
-/* Returns 0 if F12 was pressed, 1 for button1, 2 for button2, 
-   3 for button3 */
-int newtWinTernary(char * title, char * button1, char * button2, 
-		   char * button3, char * message, ...);
-
-/* Returns the button number pressed, 0 on F12 */
-int newtWinMenu(char * title, char * text, int suggestedWidth, int flexDown, 
-		int flexUp, int maxListHeight, char ** items, int * listItem,
-		char * button1, ...);
-
-struct newtWinEntry {
-    char * text;
-    char ** value;		/* may be initialized to set default */
-    int flags;
-};
-
-/* Returns the button number pressed, 0 on F12. The final values are
-   dynamically allocated, and need to be freed. */
-int newtWinEntries(char * title, char * text, int suggestedWidth, int flexDown, 
-		   int flexUp, int dataWidth, 
-		   struct newtWinEntry * items, char * button1, ...);
-
-#ifdef __cplusplus
-} /* End of extern "C" { */
-#endif
-
-#endif /* H_NEWT */
diff --git a/mdk-stage1/newt/newt_pr.h b/mdk-stage1/newt/newt_pr.h
deleted file mode 100644
index 76f5e2f6f..000000000
--- a/mdk-stage1/newt/newt_pr.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef H_NEWT_PR
-#define H_NEWT_PR
-
-#define COLORSET_ROOT 		NEWT_COLORSET_ROOT
-#define COLORSET_BORDER 	NEWT_COLORSET_BORDER
-#define COLORSET_WINDOW		NEWT_COLORSET_WINDOW
-#define COLORSET_SHADOW		NEWT_COLORSET_SHADOW
-#define COLORSET_TITLE		NEWT_COLORSET_TITLE
-#define COLORSET_BUTTON		NEWT_COLORSET_BUTTON
-#define COLORSET_ACTBUTTON	NEWT_COLORSET_ACTBUTTON
-#define COLORSET_CHECKBOX	NEWT_COLORSET_CHECKBOX
-#define COLORSET_ACTCHECKBOX	NEWT_COLORSET_ACTCHECKBOX
-#define COLORSET_ENTRY		NEWT_COLORSET_ENTRY
-#define COLORSET_LABEL		NEWT_COLORSET_LABEL
-#define COLORSET_LISTBOX	NEWT_COLORSET_LISTBOX
-#define COLORSET_ACTLISTBOX	NEWT_COLORSET_ACTLISTBOX
-#define COLORSET_TEXTBOX	NEWT_COLORSET_TEXTBOX
-#define COLORSET_ACTTEXTBOX	NEWT_COLORSET_ACTTEXTBOX
-
-int newtSetFlags(int oldFlags, int newFlags, enum newtFlagsSense sense);
-
-void newtGotorc(int row, int col);
-void newtGetrc(int * row, int * col);
-void newtGetWindowPos(int * x, int * y);
-void newtDrawBox(int left, int top, int width, int height, int shadow);
-void newtClearBox(int left, int top, int width, int height);
-
-int newtGetKey(void);
-
-struct newtComponent_struct {
-    /* common data */
-    int height, width;
-    int top, left;
-    int takesFocus;
-    int isMapped;
-
-    struct componentOps * ops;
-
-    newtCallback callback;
-    void * callbackData;
-
-    void * data;
-} ;
-
-enum eventResultTypes { ER_IGNORED, ER_SWALLOWED, ER_EXITFORM, ER_SETFOCUS,
-			ER_NEXTCOMP };
-struct eventResult {
-    enum eventResultTypes result;
-    union {
-	newtComponent focus;
-    } u;
-};
-
-enum eventTypes { EV_FOCUS, EV_UNFOCUS, EV_KEYPRESS, EV_MOUSE };
-enum eventSequence { EV_EARLY, EV_NORMAL, EV_LATE };
-
-struct event {
-    enum eventTypes event;
-    enum eventSequence when;
-    union {
-	int key;
-	struct {
-	    enum { MOUSE_MOTION, MOUSE_BUTTON_DOWN, MOUSE_BUTTON_UP } type;
-	    int x, y;
-	} mouse;
-    } u;
-} ;
-
-struct componentOps {
-    void (* draw)(newtComponent c);
-    struct eventResult (* event)(newtComponent c, struct event ev);
-    void (* destroy)(newtComponent c);
-    void (* place)(newtComponent c, int newLeft, int newTop);
-    void (* mapped)(newtComponent c, int isMapped);
-} ;
-
-void newtDefaultPlaceHandler(newtComponent c, int newLeft, int newTop);
-void newtDefaultMappedHandler(newtComponent c, int isMapped);
-struct eventResult newtDefaultEventHandler(newtComponent c,
-					   struct event ev);
-
-#endif /* H_NEWT_PR */
diff --git a/mdk-stage1/newt/scale.c b/mdk-stage1/newt/scale.c
deleted file mode 100644
index 800958580..000000000
--- a/mdk-stage1/newt/scale.c
+++ /dev/null
@@ -1,72 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct scale {
-    int fullValue;
-    int charsSet;
-};
-
-static void scaleDraw(newtComponent co);
-
-static struct componentOps scaleOps = {
-    scaleDraw,
-    newtDefaultEventHandler,
-    NULL,
-    newtDefaultPlaceHandler,
-    newtDefaultMappedHandler,
-} ;
-
-newtComponent newtScale(int left, int top, int width, int fullValue) {
-    newtComponent co;
-    struct scale * sc;
-
-    co = malloc(sizeof(*co));
-    sc = malloc(sizeof(struct scale));
-    co->data = sc;
-
-    co->ops = &scaleOps;
-
-    co->height = 1;
-    co->width = width;
-    co->top = top;
-    co->left = left;
-    co->takesFocus = 0;
-
-    sc->fullValue = fullValue;
-    sc->charsSet = 0;
-
-    return co;
-}
-
-void newtScaleSet(newtComponent co, unsigned int amount) {
-    struct scale * sc = co->data;
-    int newCharsSet;
-
-    newCharsSet = (amount * co->width) / sc->fullValue;
-    
-    if (newCharsSet != sc->charsSet) {
-	sc->charsSet = newCharsSet;
-	scaleDraw(co);
-    }
-}
-
-static void scaleDraw(newtComponent co) {
-    struct scale * sc = co->data;
-    int i;
-
-    if (co->top == -1) return;
-
-    newtGotorc(co->top, co->left);
-
-    SLsmg_set_color(NEWT_COLORSET_FULLSCALE);
-    for (i = 0; i < sc->charsSet; i++)
-	SLsmg_write_string(" ");
-
-    SLsmg_set_color(NEWT_COLORSET_EMPTYSCALE);
-    for (i = 0; i < (co->width - sc->charsSet); i++)
-	SLsmg_write_string(" ");
-}
diff --git a/mdk-stage1/newt/scrollbar.c b/mdk-stage1/newt/scrollbar.c
deleted file mode 100644
index cb4bc2757..000000000
--- a/mdk-stage1/newt/scrollbar.c
+++ /dev/null
@@ -1,124 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct scrollbar {
-    int curr;
-    int cs, csThumb;
-    int arrows;
-} ;
-
-static void sbDraw(newtComponent co);
-static void sbDestroy(newtComponent co);
-static void sbDrawThumb(newtComponent co, int isOn);
-
-static struct componentOps sbOps = {
-    sbDraw,
-    newtDefaultEventHandler,
-    sbDestroy,
-    newtDefaultPlaceHandler,
-    newtDefaultMappedHandler,
-} ;
-
-void newtScrollbarSet(newtComponent co, int where, int total) {
-    struct scrollbar * sb = co->data;
-    int new;
-
-    if (sb->arrows)
-	new = (where * (co->height - 3)) / (total ? total : 1) + 1;
-    else
-	new = (where * (co->height - 1)) / (total ? total : 1);
-    if (new != sb->curr) {
-	sbDrawThumb(co, 0);
-	sb->curr = new;
-	sbDrawThumb(co, 1);
-    }
-}
-
-newtComponent newtVerticalScrollbar(int left, int top, int height,
-				    int normalColorset, int thumbColorset) {
-    newtComponent co;
-    struct scrollbar * sb;
-
-    co = malloc(sizeof(*co));
-    sb = malloc(sizeof(*sb));
-    co->data = sb;
-
-    if (!strcmp(getenv("TERM"), "linux") && height >= 2) {
-	sb->arrows = 1;
-	sb->curr = 1;
-    } else {
-	sb->arrows = 0;
-	sb->curr = 0;
-    }
-    sb->cs = normalColorset;
-    sb->csThumb = thumbColorset;
-
-    co->ops = &sbOps;
-    co->isMapped = 0;
-    co->left = left;
-    co->top = top;
-    co->height = height;
-    co->width = 1;
-    co->takesFocus = 0;  
-    
-    return co;
-}
-
-static void sbDraw(newtComponent co) {
-    struct scrollbar * sb = co->data;
-    int i;
-
-    if (!co->isMapped) return;
-
-    SLsmg_set_color(sb->cs);
-
-    SLsmg_set_char_set(1);
-    if (sb->arrows) {
-	newtGotorc(co->top, co->left);
- 	SLsmg_write_char('\x2d');
-	for (i = 1; i < co->height - 1; i++) {
-	    newtGotorc(i + co->top, co->left);
-	    SLsmg_write_char('\x61');
-	}
-	newtGotorc(co->top + co->height - 1, co->left);
- 	SLsmg_write_char('\x2e');
-    } else {
-	for (i = 0; i < co->height; i++) {
-	    newtGotorc(i + co->top, co->left);
-	    SLsmg_write_char('\x61');
-	}
-    }
-
-    SLsmg_set_char_set(0);
-
-    sbDrawThumb(co, 1);
-}
-
-static void sbDrawThumb(newtComponent co, int isOn) {
-    struct scrollbar * sb = co->data;
-    char ch = isOn ? '#' : '\x61';
-
-    if (!co->isMapped) return;
-
-    newtGotorc(sb->curr + co->top, co->left);
-    SLsmg_set_char_set(1);
-
-    /*if (isOn)
-	SLsmg_set_color(sb->csThumb);
-    else*/
-	SLsmg_set_color(sb->cs);
-
-    SLsmg_write_char(ch);
-    SLsmg_set_char_set(0);
-}
-
-static void sbDestroy(newtComponent co) {
-    struct scrollbar * sb = co->data;
- 
-    free(sb);
-    free(co);
-}
diff --git a/mdk-stage1/newt/textbox.c b/mdk-stage1/newt/textbox.c
deleted file mode 100644
index 8eb4ae4db..000000000
--- a/mdk-stage1/newt/textbox.c
+++ /dev/null
@@ -1,409 +0,0 @@
-#include <ctype.h>
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct textbox {
-    char ** lines;
-    int numLines;
-    int linesAlloced;
-    int doWrap;
-    newtComponent sb;
-    int topLine;
-    int textWidth;
-};
-
-static char * expandTabs(const char * text);
-static void textboxDraw(newtComponent co);
-static void addLine(newtComponent co, const char * s, int len);
-static void doReflow(const char * text, char ** resultPtr, int width, 
-		     int * badness, int * heightPtr);
-static struct eventResult textboxEvent(newtComponent c,
-				      struct event ev);
-static void textboxDestroy(newtComponent co);
-static void textboxPlace(newtComponent co, int newLeft, int newTop);
-static void textboxMapped(newtComponent co, int isMapped);
-
-static struct componentOps textboxOps = {
-    textboxDraw,
-    textboxEvent,
-    textboxDestroy,
-    textboxPlace,
-    textboxMapped,
-} ;
-
-static void textboxMapped(newtComponent co, int isMapped) {
-    struct textbox * tb = co->data;
-
-    co->isMapped = isMapped;
-    if (tb->sb)
-	tb->sb->ops->mapped(tb->sb, isMapped);
-}
-
-static void textboxPlace(newtComponent co, int newLeft, int newTop) {
-    struct textbox * tb = co->data;
-
-    co->top = newTop;
-    co->left = newLeft;
-
-    if (tb->sb)
-	tb->sb->ops->place(tb->sb, co->left + co->width - 1, co->top);
-}
-
-void newtTextboxSetHeight(newtComponent co, int height) {
-    co->height = height;
-}
-
-int newtTextboxGetNumLines(newtComponent co) {
-    struct textbox * tb = co->data;
-
-    return (tb->numLines);
-}
-
-newtComponent newtTextboxReflowed(int left, int top, char * text, int width,
-				  int flexDown, int flexUp, int flags __attribute__ ((unused))) {
-    newtComponent co;
-    char * reflowedText;
-    int actWidth, actHeight;
-
-    reflowedText = newtReflowText(text, width, flexDown, flexUp,
-				  &actWidth, &actHeight);
-    
-    co = newtTextbox(left, top, actWidth, actHeight, NEWT_FLAG_WRAP);
-    newtTextboxSetText(co, reflowedText);
-    free(reflowedText);
-
-    return co;
-}
-
-newtComponent newtTextbox(int left, int top, int width, int height, int flags) {
-    newtComponent co;
-    struct textbox * tb;
-
-    co = malloc(sizeof(*co));
-    tb = malloc(sizeof(*tb));
-    co->data = tb;
-
-    co->ops = &textboxOps;
-
-    co->height = height;
-    co->top = top;
-    co->left = left;
-    co->takesFocus = 0;
-    co->width = width;
-
-    tb->doWrap = flags & NEWT_FLAG_WRAP;
-    tb->numLines = 0;
-    tb->linesAlloced = 0;
-    tb->lines = NULL;
-    tb->topLine = 0;
-    tb->textWidth = width;
-
-    if (flags & NEWT_FLAG_SCROLL) {
-	co->width += 2;
-	tb->sb = newtVerticalScrollbar(co->left + co->width - 1, co->top, 
-			   co->height, COLORSET_TEXTBOX, COLORSET_TEXTBOX);
-    } else {
-	tb->sb = NULL;
-    }
-
-    return co;
-}
-
-static char * expandTabs(const char * text) {
-    int bufAlloced = strlen(text) + 40;
-    char * buf, * dest;
-    const char * src;
-    int bufUsed = 0;
-    int linePos = 0;
-    int i;
-
-    buf = malloc(bufAlloced + 1);
-    for (src = text, dest = buf; *src; src++) {
-	if ((bufUsed + 10) > bufAlloced) {
-	    bufAlloced += strlen(text) / 2;
-	    buf = realloc(buf, bufAlloced + 1);
-	    dest = buf + bufUsed;
-	}
-	if (*src == '\t') {
-	    i = 8 - (linePos & 8);
-	    memset(dest, ' ', i);
-	    dest += i, bufUsed += i, linePos += i;
-	} else {
-	    if (*src == '\n')
-		linePos = 0;
-	    else
-		linePos++;
-
-	    *dest++ = *src;
-	    bufUsed++;
-	}
-    }
-
-    *dest = '\0';
-    return buf;
-}
-
-#define iseuckanji(c)   (0xa1 <= (unsigned char)(c&0xff) && (unsigned char)(c&0xff) <= 0xfe)
-
-static void doReflow(const char * text, char ** resultPtr, int width, 
-		     int * badness, int * heightPtr) {
-    char * result = NULL;
-    const char * chptr, * end;
-    int i;
-    int howbad = 0;
-    int height = 0;
-    int kanji = 0;
-
-    if (resultPtr) {
-	/* XXX I think this will work */
-	result = malloc(strlen(text) + (strlen(text) / width) + 50);
-	*result = '\0';
-    }
-
-    while (*text) {
-        kanji = 0;
-	end = strchr(text, '\n');
-	if (!end)
-	    end = text + strlen(text);
-
-	while (*text && text < end) {
-	    if (end - text < width) {
-		if (result) {
-		    strncat(result, text, end - text);
-		    strcat(result, "\n");
-		    height++;
-		}
-
-		if (end - text < (width / 2))
-		    howbad += ((width / 2) - (end - text)) / 2;
-		text = end;
-		if (*text) text++;
-	    } else {
-	        chptr = text;
-	        kanji = 0;
-	        for ( i = 0; i < width - 1; i++ ) {
-		    if ( !iseuckanji(*chptr)) {
-			kanji = 0;
-		    } else if ( kanji == 1 ) {
-		        kanji = 2; 
-		    } else {
-		        kanji = 1;
-		    }
-		    chptr++;
-		}
-	        if (kanji == 0) {
-		    while (chptr > text && !isspace(*chptr)) chptr--;
-		    while (chptr > text && isspace(*chptr)) chptr--;
-		    chptr++;
-		}
-		
-		if (chptr-text == 1 && !isspace(*chptr))
-		  chptr = text + width - 1;
-
-		if (chptr > text)
-		    howbad += width - (chptr - text) + 1;
-		if (result) {
-		  if (kanji == 1) {
-		    strncat(result, text, chptr - text + 1);
-		    chptr++;
-		    kanji = 0;
-		  } else {
-		    strncat(result, text, chptr - text);
-		  }
-		    strcat(result, "\n");
-		    height++;
-		}
-
-	        if (isspace(*chptr))
-		    text = chptr + 1;
-		else
-		  text = chptr;
-		while (isspace(*text)) text++;
-	    }
-	}
-    }
-
-//    if (result) printf("result: %s\n", result);
-
-    if (badness) *badness = howbad;
-    if (resultPtr) *resultPtr = result;
-    if (heightPtr) *heightPtr = height;
-}
-
-char * newtReflowText(char * text, int width, int flexDown, int flexUp,
-		      int * actualWidth, int * actualHeight) {
-    int min, max;
-    int i;
-    char * result;
-    int minbad, minbadwidth, howbad;
-    char * expandedText;
-
-    expandedText = expandTabs(text);
-
-    if (flexDown || flexUp) {
-	min = width - flexDown;
-	max = width + flexUp;
-
-	minbad = -1;
-	minbadwidth = width;
-
-	for (i = min; i <= max; i++) {
-	    doReflow(expandedText, NULL, i, &howbad, NULL);
-
-	    if (minbad == -1 || howbad < minbad) {
-		minbad = howbad;
-		minbadwidth = i;
-	    }
- 	}
-
-	width = minbadwidth;
-    }
-
-    doReflow(expandedText, &result, width, NULL, actualHeight);
-    free(expandedText);
-    if (actualWidth) *actualWidth = width;
-    return result;
-}
-
-void newtTextboxSetText(newtComponent co, const char * text) {
-    const char * start, * end;
-    struct textbox * tb = co->data;
-    char * reflowed, * expanded;
-    int badness, height;
-
-    if (tb->lines) {
-	free(tb->lines);
-	tb->linesAlloced = tb->numLines = 0;
-    }
-
-    expanded = expandTabs(text);
-
-    if (tb->doWrap) {
-	doReflow(expanded, &reflowed, tb->textWidth, &badness, &height);
-	free(expanded);
-	expanded = reflowed;
-    }
-
-    for (start = expanded; *start; start++)
-	if (*start == '\n') tb->linesAlloced++;
-
-    /* This ++ leaves room for an ending line w/o a \n */
-    tb->linesAlloced++;
-    tb->lines = malloc(sizeof(char *) * tb->linesAlloced);
-
-    start = expanded;
-    while ((end = strchr(start, '\n'))) {
-	addLine(co, start, end - start);
-	start = end + 1;
-    }
-
-    if (*start)
-	addLine(co, start, strlen(start));
-
-    free(expanded);
-}
-
-/* This assumes the buffer is allocated properly! */
-static void addLine(newtComponent co, const char * s, int len) {
-    struct textbox * tb = co->data;
-
-    if (len > tb->textWidth) len = tb->textWidth;
-
-    tb->lines[tb->numLines] = malloc(tb->textWidth + 1);
-    memset(tb->lines[tb->numLines], ' ', tb->textWidth); 
-    memcpy(tb->lines[tb->numLines], s, len);
-    tb->lines[tb->numLines++][tb->textWidth] = '\0';
-}
-
-static void textboxDraw(newtComponent c) {
-    int i;
-    struct textbox * tb = c->data;
-    int size;
-
-    if (tb->sb) {
-	size = tb->numLines - c->height;
-	newtScrollbarSet(tb->sb, tb->topLine, size ? size : 0);
-	tb->sb->ops->draw(tb->sb);
-    }
-
-    SLsmg_set_color(NEWT_COLORSET_TEXTBOX);
-   
-    for (i = 0; (i + tb->topLine) < tb->numLines && i < c->height; i++) {
-	newtGotorc(c->top + i, c->left);
-	SLsmg_write_string(tb->lines[i + tb->topLine]);
-    }
-}
-
-static struct eventResult textboxEvent(newtComponent co, 
-				      struct event ev) {
-    struct textbox * tb = co->data;
-    struct eventResult er;
-
-    er.result = ER_IGNORED;
-
-    if (ev.when == EV_EARLY && ev.event == EV_KEYPRESS && tb->sb) {
-	switch (ev.u.key) {
-	  case NEWT_KEY_UP:
-	    if (tb->topLine) tb->topLine--;
-	    textboxDraw(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_DOWN:
-	    if (tb->topLine < (tb->numLines - co->height)) tb->topLine++;
-	    textboxDraw(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_PGDN:
-	    tb->topLine += co->height;
-	    if (tb->topLine > (tb->numLines - co->height)) {
-		tb->topLine = tb->numLines - co->height;
-		if (tb->topLine < 0) tb->topLine = 0;
-	    }
-	    textboxDraw(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_PGUP:
-	    tb->topLine -= co->height;
-	    if (tb->topLine < 0) tb->topLine = 0;
-	    textboxDraw(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-	}
-    }
-    if (ev.when == EV_EARLY && ev.event == EV_MOUSE && tb->sb) {
-	/* Top scroll arrow */
-	if (ev.u.mouse.x == co->width && ev.u.mouse.y == co->top) {
-	    if (tb->topLine) tb->topLine--;
-	    textboxDraw(co);
-	    
-	    er.result = ER_SWALLOWED;
-	}
-	/* Bottom scroll arrow */
-	if (ev.u.mouse.x == co->width &&
-	    ev.u.mouse.y == co->top + co->height - 1) {
-	    if (tb->topLine < (tb->numLines - co->height)) tb->topLine++;
-	    textboxDraw(co);
-	    
-	    er.result = ER_SWALLOWED;
-	}
-    }
-    return er;
-}
-
-static void textboxDestroy(newtComponent co) {
-    int i;
-    struct textbox * tb = co->data;
-
-    for (i = 0; i < tb->numLines; i++) 
-	free(tb->lines[i]);
-    free(tb->lines);
-    free(tb);
-    free(co);
-}
diff --git a/mdk-stage1/newt/windows.c b/mdk-stage1/newt/windows.c
deleted file mode 100644
index 30a8d526c..000000000
--- a/mdk-stage1/newt/windows.c
+++ /dev/null
@@ -1,275 +0,0 @@
-#include <errno.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "errno.h"
-#include "newt.h"
-
-static void * newtvwindow(char * title, char * button1, char * button2, 
-		       char * button3, char * message, va_list args) {
-    newtComponent b1, b2 = NULL, b3 = NULL, t, f, answer;
-    char * buf = NULL;
-    int size = 0;
-    int i = 0;
-    int scroll = 0;
-    int width, height;
-    char * flowedText;
-    newtGrid grid, buttonGrid;
-
-    do {
-	size += 1000;
-	if (buf) free(buf);
-	buf = malloc(size);
-	i = vsnprintf(buf, size, message, args);
-    } while (i >= size || i == -1);
-
-    flowedText = newtReflowText(buf, 50, 5, 5, &width, &height);
-    if (height > 6) {
-	free(flowedText);
-	flowedText = newtReflowText(buf, 60, 5, 5, &width, &height);
-    }
-    free(buf);
-
-    if (height > 12) {
-	height = 12;
-	scroll = NEWT_FLAG_SCROLL;
-    }
-    t = newtTextbox(-1, -1, width, height, NEWT_TEXTBOX_WRAP | scroll);
-    newtTextboxSetText(t, flowedText);
-    free(flowedText);
-
-    if (button3) {
-	buttonGrid = newtButtonBar(button1, &b1, button2, &b2, 
-				   button3, &b3, NULL);
-    } else if (button2) {
-	buttonGrid = newtButtonBar(button1, &b1, button2, &b2, NULL);
-    } else {
-	buttonGrid = newtButtonBar(button1, &b1, NULL);
-    }
-
-    newtGridSetField(buttonGrid, 0, 0, NEWT_GRID_COMPONENT, b1, 
-		     0, 0, button2 ? 1 : 0, 0, 0, 0);
-
-    grid = newtCreateGrid(1, 2);
-    newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, t, 0, 0, 0, 0, 0, 0);
-    newtGridSetField(grid, 0, 1, NEWT_GRID_SUBGRID, buttonGrid, 
-		     0, 1, 0, 0, 0, NEWT_GRID_FLAG_GROWX);
-    newtGridWrappedWindow(grid, title);
-
-    f = newtForm(NULL, NULL, 0);
-    newtFormAddComponents(f, t, b1, NULL);
-
-    if (button2)
-	newtFormAddComponent(f, b2);
-    if (button3)
-	newtFormAddComponent(f, b3);
-
-    answer = newtRunForm(f);
-    newtGridFree(grid, 1);
- 
-    newtFormDestroy(f);
-    newtPopWindow();
-
-    if (answer == f)
-	return NULL;
-    else if (answer == b1)
-	return button1;
-    else if (answer == b2)
-	return button2;
-
-    return button3;
-}
-
-int newtWinChoice(char * title, char * button1, char * button2, 
-		   char * message, ...) {
-    va_list args;
-    void * rc;
-
-    va_start(args, message);
-    rc = newtvwindow(title, button1, button2, NULL, message, args);
-    va_end(args);
-
-    if (rc == button1)
-	return 1;
-    else if (rc == button2)
-	return 2;
-
-    return 0;
-}
-
-void newtWinMessage(char * title, char * buttonText, char * text, ...) {
-    va_list args;
-
-    va_start(args, text);
-    newtvwindow(title, buttonText, NULL, NULL, text, args);
-    va_end(args);
-}
-
-void newtWinMessagev(char * title, char * buttonText, char * text, 
-		     va_list argv) {
-    newtvwindow(title, buttonText, NULL, NULL, text, argv);
-}
-
-int newtWinTernary(char * title, char * button1, char * button2, 
-		   char * button3, char * message, ...) {
-    va_list args;
-    void * rc;
-
-    va_start(args, message);
-    rc = newtvwindow(title, button1, button2, button3, message, args);
-    va_end(args);
-
-    if (rc == button1)
-	return 1;
-    else if (rc == button2)
-	return 2;
-    else if (rc == button3)
-	return 3;
-
-    return 0;
-}
-
-/* only supports up to 50 buttons -- shucks! */
-int newtWinMenu(char * title, char * text, int suggestedWidth, int flexDown, 
-		int flexUp, int maxListHeight, char ** items, int * listItem,
-		char * button1, ...) {
-    newtComponent textbox, listbox, result, form;
-    va_list args;
-    newtComponent buttons[50];
-    newtGrid grid, buttonBar;
-    int numButtons;
-    int i, rc;
-    int needScroll;
-    char * buttonName;
-
-    textbox = newtTextboxReflowed(-1, -1, text, suggestedWidth, flexDown,
-			          flexUp, 0);
-
-    for (i = 0; items[i]; i++) ;
-    if (i < maxListHeight) maxListHeight = i;
-    needScroll = i > maxListHeight;
-
-    listbox = newtListbox(-1, -1, maxListHeight, 
-		  (needScroll ? NEWT_FLAG_SCROLL : 0) | NEWT_FLAG_RETURNEXIT);
-    for (i = 0; items[i]; i++) {
-	newtListboxAddEntry(listbox, items[i], (void *) (long)i);
-    }
-
-    newtListboxSetCurrent(listbox, *listItem);
-
-    buttonName = button1, numButtons = 0;
-    va_start(args, button1);
-    while (buttonName) {
-	buttons[numButtons] = newtButton(-1, -1, buttonName);
-	numButtons++;
-	buttonName = va_arg(args, char *);
-    }
-
-    va_end(args);
-
-    buttonBar = newtCreateGrid(numButtons, 1);
-    for (i = 0; i < numButtons; i++) {
-	newtGridSetField(buttonBar, i, 0, NEWT_GRID_COMPONENT, 
-			 buttons[i],
-			 i ? 1 : 0, 0, 0, 0, 0, 0);
-    }
-
-    grid = newtGridSimpleWindow(textbox, listbox, buttonBar);
-    newtGridWrappedWindow(grid, title);
-
-    form = newtForm(NULL, 0, 0);
-    newtGridAddComponentsToForm(grid, form, 1);
-    newtGridFree(grid, 1);
-
-    result = newtRunForm(form);
-
-    *listItem = ((long) newtListboxGetCurrent(listbox));
-
-    for (rc = 0; result != buttons[rc] && rc < numButtons; rc++);
-    if (rc == numButtons) 
-	rc = 0; /* F12 or return-on-exit (which are the same for us) */
-    else 
-	rc++;
-
-    newtFormDestroy(form);
-    newtPopWindow();
-
-    return rc;
-}
-
-/* only supports up to 50 buttons and entries -- shucks! */
-int newtWinEntries(char * title, char * text, int suggestedWidth, int flexDown, 
-		   int flexUp, int dataWidth, 
-		   struct newtWinEntry * items, char * button1, ...) {
-    newtComponent buttons[50], result, form, textw;
-    newtGrid grid, buttonBar, subgrid;
-    int numItems;
-    int rc, i;
-    int numButtons;
-    char * buttonName;
-    va_list args;
-
-    textw = newtTextboxReflowed(-1, -1, text, suggestedWidth, flexDown,
-			        flexUp, 0);
-
-    for (numItems = 0; items[numItems].text; numItems++); 
-
-    buttonName = button1, numButtons = 0;
-    va_start(args, button1);
-    while (buttonName) {
-	buttons[numButtons] = newtButton(-1, -1, buttonName);
-	numButtons++;
-	buttonName = va_arg(args, char *);
-    }
-
-    va_end(args);
-
-    buttonBar = newtCreateGrid(numButtons, 1);
-    for (i = 0; i < numButtons; i++) {
-	newtGridSetField(buttonBar, i, 0, NEWT_GRID_COMPONENT, 
-			 buttons[i],
-			 i ? 1 : 0, 0, 0, 0, 0, 0);
-    }
-
-    subgrid = newtCreateGrid(2, numItems);
-    for (i = 0; i < numItems; i++) {
-	newtGridSetField(subgrid, 0, i, NEWT_GRID_COMPONENT,
-		         newtLabel(-1, -1, items[i].text),
-		         0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
-	newtGridSetField(subgrid, 1, i, NEWT_GRID_COMPONENT,
-		         newtEntry(-1, -1, items[i].value ? 
-				    *items[i].value : NULL, dataWidth,
-				    items[i].value, items[i].flags),
-		         1, 0, 0, 0, 0, 0);
-    }
-
-    grid = newtCreateGrid(1, 3);
-    form = newtForm(NULL, 0, 0);
-    newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, textw, 
-		     0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
-    newtGridSetField(grid, 0, 1, NEWT_GRID_SUBGRID, subgrid, 
-		     0, 1, 0, 0, 0, 0);
-    newtGridSetField(grid, 0, 2, NEWT_GRID_SUBGRID, buttonBar, 
-		     0, 1, 0, 0, 0, NEWT_GRID_FLAG_GROWX);
-    newtGridAddComponentsToForm(grid, form, 1);
-    newtGridWrappedWindow(grid, title);
-    newtGridFree(grid, 1);
-
-    result = newtRunForm(form);
-
-    for (rc = 0; rc < numItems; rc++)
-	*items[rc].value = strdup(*items[rc].value);
-
-    for (rc = 0; result != buttons[rc] && rc < numButtons; rc++);
-    if (rc == numButtons) 
-	rc = 0; /* F12 */
-    else 
-	rc++;
-
-    newtFormDestroy(form);
-    newtPopWindow();
-
-    return rc;
-}
diff --git a/mdk-stage1/nfsmount.c b/mdk-stage1/nfsmount.c
deleted file mode 100644
index 032fde60c..000000000
--- a/mdk-stage1/nfsmount.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/* this is based on work from redhat, made it lighter (gc)
- */
-
-
-/* MODIFIED for Red Hat Linux installer
- * msw@redhat.com
- * o always mounts without lockd
- * o uses our own host resolution
- */
-
-/*
- * nfsmount.c -- Linux NFS mount
- * Copyright (C) 1993 Rick Sladkey <jrs@world.std.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * Wed Feb  8 12:51:48 1995, biro@yggdrasil.com (Ross Biro): allow all port
- * numbers to be specified on the command line.
- *
- * Fri, 8 Mar 1996 18:01:39, Swen Thuemmler <swen@uni-paderborn.de>:
- * Omit the call to connect() for Linux version 1.3.11 or later.
- *
- * Wed Oct  1 23:55:28 1997: Dick Streefland <dick_streefland@tasking.com>
- * Implemented the "bg", "fg" and "retry" mount options for NFS.
- */
-
-/*
- * nfsmount.c,v 1.1.1.1 1993/11/18 08:40:51 jrs Exp
- */
-
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <netdb.h>
-#include <sys/mount.h>
-#include <rpc/rpc.h>
-#include <rpc/pmap_prot.h>
-#include <rpc/pmap_clnt.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <sys/utsname.h>
-#include <sys/stat.h>
-#include <arpa/inet.h>
-#include "linux-2.2/nfs.h"
-#include "linux-2.2/nfs_mount.h" //#include "mount_constants.h"
-
-#include "log.h"
-#include "dns.h"
-
-#include "nfsmount.h"
-
-
-bool_t
-xdr_fhandle(XDR *xdrs, fhandle objp)
-{
-	 if (!xdr_opaque(xdrs, objp, FHSIZE)) {
-		 return (FALSE);
-	 }
-	return (TRUE);
-}
-
-bool_t
-xdr_fhstatus(XDR *xdrs, fhstatus *objp)
-{
-
-	 if (!xdr_u_int(xdrs, &objp->fhs_status)) {
-		 return (FALSE);
-	 }
-	switch (objp->fhs_status) {
-	case 0:
-		 if (!xdr_fhandle(xdrs, objp->fhstatus_u.fhs_fhandle)) {
-			 return (FALSE);
-		 }
-		break;
-	default:
-		break;
-	}
-	return (TRUE);
-}
-
-bool_t
-xdr_dirpath(XDR *xdrs, dirpath *objp)
-{
-
-	 if (!xdr_string(xdrs, objp, MNTPATHLEN)) {
-		 return (FALSE);
-	 }
-	return (TRUE);
-}
-
-
-static int nfs_mount_version = 3; /* kernel >= 2.1.32 */   /* *********** TODO for kernel 2.4, nfs-mount version 4 */
-
-
-int nfsmount_prepare(const char *spec, int *flags, char **mount_opts)
-{
-	char hostdir[1024];
-	CLIENT *mclient;
-	char *hostname, *dirname;
-	fhandle root_fhandle;
-	struct timeval total_timeout;
-	enum clnt_stat clnt_stat;
-	static struct nfs_mount_data data;
-	struct sockaddr_in server_addr;
-	struct sockaddr_in mount_server_addr;
-	int msock, fsock;
-	struct timeval retry_timeout;
-	struct fhstatus status;
-	char *s;
-	int port;
-
-	msock = fsock = -1;
-	mclient = NULL;
-
-	strncpy(hostdir, spec, sizeof(hostdir));
-	if ((s = (strchr(hostdir, ':')))) {
-		hostname = hostdir;
-		dirname = s + 1;
-		*s = '\0';
-	} else {
-		log_message("nfsmount: format not host:dir");
-		goto fail;
-	}
-
-	server_addr.sin_family = AF_INET;
-
-	/* first, try as IP address */
-	if (!inet_aton(hostname, &server_addr.sin_addr)) {
-		/* failure, try as machine name */
-		if (mygethostbyname(hostname, &server_addr.sin_addr))
-			goto fail;
-	}
-
-	memcpy (&mount_server_addr, &server_addr, sizeof (mount_server_addr));
-
-
-
-	/* Set default options.
-	 * timeo is filled in after we know whether it'll be TCP or UDP. */
-	memset(&data, 0, sizeof(data));
-	data.retrans	= 3;
-	data.acregmin	= 3;
-	data.acregmax	= 60;
-	data.acdirmin	= 30;
-	data.acdirmax	= 60;
-	data.rsize = 8192;
-	data.wsize = 8192;
-	data.bsize = 8192;
-#if NFS_MOUNT_VERSION >= 2
-	data.namlen	= NAME_MAX;
-#endif
-
-#if NFS_MOUNT_VERSION >= 3
-	if (nfs_mount_version >= 3)
-	        data.flags |= NFS_MOUNT_NONLM; /* HACK HACK msw */
-#endif
-
-	/* Adjust options if none specified */
-	if (!data.timeo)
-		data.timeo = 7;  /* udp */
-
-
-	data.version = nfs_mount_version;
-	*mount_opts = (char *) &data;
-
-	if (*flags & MS_REMOUNT)
-		return 0;
-
-
-	retry_timeout.tv_sec = 3;
-	retry_timeout.tv_usec = 0;
-	total_timeout.tv_sec = 20;
-	total_timeout.tv_usec = 0;
-
-
-	/* contact the mount daemon via TCP */
-	mount_server_addr.sin_port = htons(0);
-	msock = RPC_ANYSOCK;
-	mclient = clnttcp_create(&mount_server_addr, MOUNTPROG, MOUNTVERS, &msock, 0, 0);
-	
-	/* if this fails, contact the mount daemon via UDP */
-	if (!mclient) {
-		mount_server_addr.sin_port = htons(0);
-		msock = RPC_ANYSOCK;
-		mclient = clntudp_create(&mount_server_addr, MOUNTPROG, MOUNTVERS, retry_timeout, &msock);
-	}
-	if (mclient) {
-				/* try to mount hostname:dirname */
-		mclient->cl_auth = authunix_create_default();
-		clnt_stat = clnt_call(mclient, MOUNTPROC_MNT,
-				      (xdrproc_t) xdr_dirpath, (caddr_t) &dirname,
-				      (xdrproc_t) xdr_fhstatus, (caddr_t) &status,
-				      total_timeout);
-		if (clnt_stat != RPC_SUCCESS) {
-			if (errno != ECONNREFUSED) {
-				log_message(clnt_sperror(mclient, "mount"));
-				goto fail;	/* don't retry */
-			}
-			log_message(clnt_sperror(mclient, "mount"));
-			auth_destroy(mclient->cl_auth);
-			clnt_destroy(mclient);
-			mclient = 0;
-			close(msock);
-		}
-	} else
-		goto fail;
-
-	if (status.fhs_status != 0) {
-		if (status.fhs_status == 2)
-			log_message("NFS server says: No such file or directory");
-		else if (status.fhs_status == 13)
-			log_message("NFS server says: Permission denied");
-		else 
-			log_message("nfsmount prepare failed, reason given by server: %d", status.fhs_status);
-		goto fail;
-	}
-
-	memcpy((char *) &root_fhandle, (char *) status.fhstatus_u.fhs_fhandle, sizeof (root_fhandle));
-
-	/* create nfs socket for kernel */
-
-	fsock = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
-	if (fsock < 0) {
-		log_perror("nfs socket");
-		goto fail;
-	}
-	if (bindresvport(fsock, 0) < 0) {
-		log_perror("nfs bindresvport");
-		goto fail;
-	}
-	server_addr.sin_port = PMAPPORT;
-	port = pmap_getport(&server_addr, NFS_PROGRAM, NFS_VERSION, IPPROTO_UDP);
-	if (port == 0)
-		port = NFS_PORT;
-#ifdef NFS_MOUNT_DEBUG
-	else
-		log_message("used portmapper to find NFS port\n");
-	log_message("using port %d for nfs deamon\n", port);
-#endif
-	server_addr.sin_port = htons(port);
-
-	/* prepare data structure for kernel */
-
-	data.fd = fsock;
-	memcpy((char *) &data.root, (char *) &root_fhandle, sizeof (root_fhandle));
-	memcpy((char *) &data.addr, (char *) &server_addr, sizeof(data.addr));
-	strncpy(data.hostname, hostname, sizeof(data.hostname));
-
-	/* clean up */
-
-	auth_destroy(mclient->cl_auth);
-	clnt_destroy(mclient);
-	close(msock);
-	return 0;
-
-	/* abort */
-
- fail:
-	if (msock != -1) {
-		if (mclient) {
-			auth_destroy(mclient->cl_auth);
-			clnt_destroy(mclient);
-		}
-		close(msock);
-	}
-	if (fsock != -1)
-		close(fsock);
-
-	return -1;
-}	
-
diff --git a/mdk-stage1/nfsmount.h b/mdk-stage1/nfsmount.h
deleted file mode 100644
index 12ffa69a6..000000000
--- a/mdk-stage1/nfsmount.h
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * Please do not edit this file.
- * It was generated using rpcgen.
- */
-
-#ifndef _NFSMOUNT_H_RPCGEN
-#define _NFSMOUNT_H_RPCGEN
-
-#include <rpc/rpc.h>
-
-int nfsmount_prepare(const char *spec, int *flags, char **mount_opts);
-
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user or with the express written consent of
- * Sun Microsystems, Inc.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*
- * Copyright (c) 1985, 1990 by Sun Microsystems, Inc.
- */
-
-/* from @(#)mount.x	1.3 91/03/11 TIRPC 1.0 */
-#ifndef _rpcsvc_mount_h
-#define _rpcsvc_mount_h
-#define MNTPATHLEN 1024
-#define MNTNAMLEN 255
-#define FHSIZE 32
-
-typedef char fhandle[FHSIZE];
-#ifdef __cplusplus 
-extern "C" bool_t xdr_fhandle(XDR *, fhandle);
-#elif __STDC__ 
-extern  bool_t xdr_fhandle(XDR *, fhandle);
-#else /* Old Style C */ 
-bool_t xdr_fhandle();
-#endif /* Old Style C */ 
-
-
-struct fhstatus {
-	u_int fhs_status;
-	union {
-		fhandle fhs_fhandle;
-	} fhstatus_u;
-};
-typedef struct fhstatus fhstatus;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_fhstatus(XDR *, fhstatus*);
-#elif __STDC__ 
-extern  bool_t xdr_fhstatus(XDR *, fhstatus*);
-#else /* Old Style C */ 
-bool_t xdr_fhstatus();
-#endif /* Old Style C */ 
-
-
-typedef char *dirpath;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_dirpath(XDR *, dirpath*);
-#elif __STDC__ 
-extern  bool_t xdr_dirpath(XDR *, dirpath*);
-#else /* Old Style C */ 
-bool_t xdr_dirpath();
-#endif /* Old Style C */ 
-
-
-typedef char *name;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_name(XDR *, name*);
-#elif __STDC__ 
-extern  bool_t xdr_name(XDR *, name*);
-#else /* Old Style C */ 
-bool_t xdr_name();
-#endif /* Old Style C */ 
-
-
-typedef struct mountbody *mountlist;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_mountlist(XDR *, mountlist*);
-#elif __STDC__ 
-extern  bool_t xdr_mountlist(XDR *, mountlist*);
-#else /* Old Style C */ 
-bool_t xdr_mountlist();
-#endif /* Old Style C */ 
-
-
-struct mountbody {
-	name ml_hostname;
-	dirpath ml_directory;
-	mountlist ml_next;
-};
-typedef struct mountbody mountbody;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_mountbody(XDR *, mountbody*);
-#elif __STDC__ 
-extern  bool_t xdr_mountbody(XDR *, mountbody*);
-#else /* Old Style C */ 
-bool_t xdr_mountbody();
-#endif /* Old Style C */ 
-
-
-typedef struct groupnode *groups;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_groups(XDR *, groups*);
-#elif __STDC__ 
-extern  bool_t xdr_groups(XDR *, groups*);
-#else /* Old Style C */ 
-bool_t xdr_groups();
-#endif /* Old Style C */ 
-
-
-struct groupnode {
-	name gr_name;
-	groups gr_next;
-};
-typedef struct groupnode groupnode;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_groupnode(XDR *, groupnode*);
-#elif __STDC__ 
-extern  bool_t xdr_groupnode(XDR *, groupnode*);
-#else /* Old Style C */ 
-bool_t xdr_groupnode();
-#endif /* Old Style C */ 
-
-
-typedef struct exportnode *exports;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_exports(XDR *, exports*);
-#elif __STDC__ 
-extern  bool_t xdr_exports(XDR *, exports*);
-#else /* Old Style C */ 
-bool_t xdr_exports();
-#endif /* Old Style C */ 
-
-
-struct exportnode {
-	dirpath ex_dir;
-	groups ex_groups;
-	exports ex_next;
-};
-typedef struct exportnode exportnode;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_exportnode(XDR *, exportnode*);
-#elif __STDC__ 
-extern  bool_t xdr_exportnode(XDR *, exportnode*);
-#else /* Old Style C */ 
-bool_t xdr_exportnode();
-#endif /* Old Style C */ 
-
-
-struct ppathcnf {
-	int pc_link_max;
-	short pc_max_canon;
-	short pc_max_input;
-	short pc_name_max;
-	short pc_path_max;
-	short pc_pipe_buf;
-	u_char pc_vdisable;
-	char pc_xxx;
-	short pc_mask[2];
-};
-typedef struct ppathcnf ppathcnf;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_ppathcnf(XDR *, ppathcnf*);
-#elif __STDC__ 
-extern  bool_t xdr_ppathcnf(XDR *, ppathcnf*);
-#else /* Old Style C */ 
-bool_t xdr_ppathcnf();
-#endif /* Old Style C */ 
-
-#endif /*!_rpcsvc_mount_h*/
-
-#define MOUNTPROG ((u_long)100005)
-#define MOUNTVERS ((u_long)1)
-
-#ifdef __cplusplus
-#define MOUNTPROC_NULL ((u_long)0)
-extern "C" void * mountproc_null_1(void *, CLIENT *);
-extern "C" void * mountproc_null_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_MNT ((u_long)1)
-extern "C" fhstatus * mountproc_mnt_1(dirpath *, CLIENT *);
-extern "C" fhstatus * mountproc_mnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_DUMP ((u_long)2)
-extern "C" mountlist * mountproc_dump_1(void *, CLIENT *);
-extern "C" mountlist * mountproc_dump_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_UMNT ((u_long)3)
-extern "C" void * mountproc_umnt_1(dirpath *, CLIENT *);
-extern "C" void * mountproc_umnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_UMNTALL ((u_long)4)
-extern "C" void * mountproc_umntall_1(void *, CLIENT *);
-extern "C" void * mountproc_umntall_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORT ((u_long)5)
-extern "C" exports * mountproc_export_1(void *, CLIENT *);
-extern "C" exports * mountproc_export_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORTALL ((u_long)6)
-extern "C" exports * mountproc_exportall_1(void *, CLIENT *);
-extern "C" exports * mountproc_exportall_1_svc(void *, struct svc_req *);
-
-#elif __STDC__
-#define MOUNTPROC_NULL ((u_long)0)
-extern  void * mountproc_null_1(void *, CLIENT *);
-extern  void * mountproc_null_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_MNT ((u_long)1)
-extern  fhstatus * mountproc_mnt_1(dirpath *, CLIENT *);
-extern  fhstatus * mountproc_mnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_DUMP ((u_long)2)
-extern  mountlist * mountproc_dump_1(void *, CLIENT *);
-extern  mountlist * mountproc_dump_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_UMNT ((u_long)3)
-extern  void * mountproc_umnt_1(dirpath *, CLIENT *);
-extern  void * mountproc_umnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_UMNTALL ((u_long)4)
-extern  void * mountproc_umntall_1(void *, CLIENT *);
-extern  void * mountproc_umntall_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORT ((u_long)5)
-extern  exports * mountproc_export_1(void *, CLIENT *);
-extern  exports * mountproc_export_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORTALL ((u_long)6)
-extern  exports * mountproc_exportall_1(void *, CLIENT *);
-extern  exports * mountproc_exportall_1_svc(void *, struct svc_req *);
-
-#else /* Old Style C */ 
-#define MOUNTPROC_NULL ((u_long)0)
-extern  void * mountproc_null_1();
-extern  void * mountproc_null_1_svc();
-#define MOUNTPROC_MNT ((u_long)1)
-extern  fhstatus * mountproc_mnt_1();
-extern  fhstatus * mountproc_mnt_1_svc();
-#define MOUNTPROC_DUMP ((u_long)2)
-extern  mountlist * mountproc_dump_1();
-extern  mountlist * mountproc_dump_1_svc();
-#define MOUNTPROC_UMNT ((u_long)3)
-extern  void * mountproc_umnt_1();
-extern  void * mountproc_umnt_1_svc();
-#define MOUNTPROC_UMNTALL ((u_long)4)
-extern  void * mountproc_umntall_1();
-extern  void * mountproc_umntall_1_svc();
-#define MOUNTPROC_EXPORT ((u_long)5)
-extern  exports * mountproc_export_1();
-extern  exports * mountproc_export_1_svc();
-#define MOUNTPROC_EXPORTALL ((u_long)6)
-extern  exports * mountproc_exportall_1();
-extern  exports * mountproc_exportall_1_svc();
-#endif /* Old Style C */ 
-#define MOUNTVERS_POSIX ((u_long)2)
-
-#ifdef __cplusplus
-extern "C" void * mountproc_null_2(void *, CLIENT *);
-extern "C" void * mountproc_null_2_svc(void *, struct svc_req *);
-extern "C" fhstatus * mountproc_mnt_2(dirpath *, CLIENT *);
-extern "C" fhstatus * mountproc_mnt_2_svc(dirpath *, struct svc_req *);
-extern "C" mountlist * mountproc_dump_2(void *, CLIENT *);
-extern "C" mountlist * mountproc_dump_2_svc(void *, struct svc_req *);
-extern "C" void * mountproc_umnt_2(dirpath *, CLIENT *);
-extern "C" void * mountproc_umnt_2_svc(dirpath *, struct svc_req *);
-extern "C" void * mountproc_umntall_2(void *, CLIENT *);
-extern "C" void * mountproc_umntall_2_svc(void *, struct svc_req *);
-extern "C" exports * mountproc_export_2(void *, CLIENT *);
-extern "C" exports * mountproc_export_2_svc(void *, struct svc_req *);
-extern "C" exports * mountproc_exportall_2(void *, CLIENT *);
-extern "C" exports * mountproc_exportall_2_svc(void *, struct svc_req *);
-#define MOUNTPROC_PATHCONF ((u_long)7)
-extern "C" ppathcnf * mountproc_pathconf_2(dirpath *, CLIENT *);
-extern "C" ppathcnf * mountproc_pathconf_2_svc(dirpath *, struct svc_req *);
-
-#elif __STDC__
-extern  void * mountproc_null_2(void *, CLIENT *);
-extern  void * mountproc_null_2_svc(void *, struct svc_req *);
-extern  fhstatus * mountproc_mnt_2(dirpath *, CLIENT *);
-extern  fhstatus * mountproc_mnt_2_svc(dirpath *, struct svc_req *);
-extern  mountlist * mountproc_dump_2(void *, CLIENT *);
-extern  mountlist * mountproc_dump_2_svc(void *, struct svc_req *);
-extern  void * mountproc_umnt_2(dirpath *, CLIENT *);
-extern  void * mountproc_umnt_2_svc(dirpath *, struct svc_req *);
-extern  void * mountproc_umntall_2(void *, CLIENT *);
-extern  void * mountproc_umntall_2_svc(void *, struct svc_req *);
-extern  exports * mountproc_export_2(void *, CLIENT *);
-extern  exports * mountproc_export_2_svc(void *, struct svc_req *);
-extern  exports * mountproc_exportall_2(void *, CLIENT *);
-extern  exports * mountproc_exportall_2_svc(void *, struct svc_req *);
-#define MOUNTPROC_PATHCONF ((u_long)7)
-extern  ppathcnf * mountproc_pathconf_2(dirpath *, CLIENT *);
-extern  ppathcnf * mountproc_pathconf_2_svc(dirpath *, struct svc_req *);
-
-#else /* Old Style C */ 
-extern  void * mountproc_null_2();
-extern  void * mountproc_null_2_svc();
-extern  fhstatus * mountproc_mnt_2();
-extern  fhstatus * mountproc_mnt_2_svc();
-extern  mountlist * mountproc_dump_2();
-extern  mountlist * mountproc_dump_2_svc();
-extern  void * mountproc_umnt_2();
-extern  void * mountproc_umnt_2_svc();
-extern  void * mountproc_umntall_2();
-extern  void * mountproc_umntall_2_svc();
-extern  exports * mountproc_export_2();
-extern  exports * mountproc_export_2_svc();
-extern  exports * mountproc_exportall_2();
-extern  exports * mountproc_exportall_2_svc();
-#define MOUNTPROC_PATHCONF ((u_long)7)
-extern  ppathcnf * mountproc_pathconf_2();
-extern  ppathcnf * mountproc_pathconf_2_svc();
-#endif /* Old Style C */ 
-
-#endif /* !_NFSMOUNT_H_RPCGEN */
diff --git a/mdk-stage1/pci-resource/.cvsignore b/mdk-stage1/pci-resource/.cvsignore
deleted file mode 100644
index 4c7b0844b..000000000
--- a/mdk-stage1/pci-resource/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-pci-ids.h
diff --git a/mdk-stage1/pci-resource/Makefile b/mdk-stage1/pci-resource/Makefile
deleted file mode 100644
index 046ab29dd..000000000
--- a/mdk-stage1/pci-resource/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
- #******************************************************************************
- #
- # $Id$
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-
-all: pci-ids.h
-
-pci-ids.h: /usr/share/ldetect-lst/pcitable update-pci-ids.pl
-	perl update-pci-ids.pl > $@ || { rm -f $@; exit 1; }
-
-clean:
-	rm -f pci-ids.h
diff --git a/mdk-stage1/pci-resource/update-pci-ids.pl b/mdk-stage1/pci-resource/update-pci-ids.pl
deleted file mode 100755
index 73f1d151b..000000000
--- a/mdk-stage1/pci-resource/update-pci-ids.pl
+++ /dev/null
@@ -1,46 +0,0 @@
-#!/usr/bin/perl
-
-use strict;
-use MDK::Common;
-
-require '/usr/bin/merge2pcitable.pl';
-my $pci = read_pcitable("/usr/share/ldetect-lst/pcitable");
-
-print '
-#define PCI_REVISION_ID         0x08    /* Revision ID */
-
-struct pci_module_map {
-	unsigned short	vendor;     /* PCI vendor id */
-	unsigned short	device;     /* PCI device id */
-	const char      *name;      /* PCI human readable name */
-	const char      *module;    /* module to load */
-};
-
-';
-
-my %t = ( 
-    network => 'network/main',
-    medias  => 'disk/scsi|hardware_raid',
-);
-
-foreach my $type (keys %t) {
-    my @modules = chomp_(`perl ../../kernel/modules.pl pci_modules4stage1:"$t{$type}"`);
-
-    print "#ifndef DISABLE_".uc($type)."
-struct pci_module_map ${type}_pci_ids[] = {
-";
-
-    foreach my $k (sort keys %$pci) {
-	my $v = $pci->{$k};
-	member($v->[0], @modules) or next;
-	$k =~ /^(....)(....)/;
-	printf qq|\t{ 0x%s, 0x%s, "%s", "%s" },\n|,
-	  $1, $2, $v->[1], $v->[0];
-    }
-
-    print "};
-int ${type}_num_ids = sizeof(${type}_pci_ids) / sizeof(struct pci_module_map);
-#endif
-
-";
-}
diff --git a/mdk-stage1/pcmcia_/Makefile b/mdk-stage1/pcmcia_/Makefile
deleted file mode 100644
index bb3b0257e..000000000
--- a/mdk-stage1/pcmcia_/Makefile
+++ /dev/null
@@ -1,48 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2001 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-all: libpcmcia.a libpcmcia-DIET.a
-
-clean:
-	rm -f *.o libpcmcia.a
-
-FLAGS = -D__linux__ -Wall -Werror -Os -fomit-frame-pointer -pipe -c -I..
-
-
-OBJS = probe.o cardmgr.o lex_config.o yacc_config.o
-
-OBJS-DIET = $(subst .o,-DIET.o,$(OBJS))
-
-
-libpcmcia.a: $(OBJS)
-	ar -cru $@ $^
-	ranlib $@
-
-libpcmcia-DIET.a: $(OBJS-DIET)
-	ar -cru $@ $^
-	ranlib $@
-
-
-$(OBJS): %.o: %.c
-	gcc $(FLAGS) $(GLIBC_INCLUDES) -c $< -o $@
-
-$(OBJS-DIET): %-DIET.o: %.c
-	gcc $(FLAGS)  $(DIETLIBC_INCLUDES) -c $< -o $@
-
diff --git a/mdk-stage1/pcmcia_/bulkmem.h b/mdk-stage1/pcmcia_/bulkmem.h
deleted file mode 100644
index 7748d4432..000000000
--- a/mdk-stage1/pcmcia_/bulkmem.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * Definitions for bulk memory services
- *
- * bulkmem.h 1.13 2001/08/24 12:16:12
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- * bulkmem.h 1.3 1995/05/27 04:49:49
- */
-
-#ifndef _LINUX_BULKMEM_H
-#define _LINUX_BULKMEM_H
-
-/* For GetFirstRegion and GetNextRegion */
-typedef struct region_info_t {
-    u_int		Attributes;
-    u_int		CardOffset;
-    u_int		RegionSize;
-    u_int		AccessSpeed;
-    u_int		BlockSize;
-    u_int		PartMultiple;
-    u_char		JedecMfr, JedecInfo;
-    memory_handle_t	next;
-} region_info_t;
-
-#define REGION_TYPE		0x0001
-#define REGION_TYPE_CM		0x0000
-#define REGION_TYPE_AM		0x0001
-#define REGION_PREFETCH		0x0008
-#define REGION_CACHEABLE	0x0010
-#define REGION_BAR_MASK		0xe000
-#define REGION_BAR_SHIFT	13
-
-/* For OpenMemory */
-typedef struct open_mem_t {
-    u_int		Attributes;
-    u_int		Offset;
-} open_mem_t;
-
-/* Attributes for OpenMemory */
-#define MEMORY_TYPE		0x0001
-#define MEMORY_TYPE_CM		0x0000
-#define MEMORY_TYPE_AM		0x0001
-#define MEMORY_EXCLUSIVE	0x0002
-#define MEMORY_PREFETCH		0x0008
-#define MEMORY_CACHEABLE	0x0010
-#define MEMORY_BAR_MASK		0xe000
-#define MEMORY_BAR_SHIFT	13
-
-typedef struct eraseq_entry_t {
-    memory_handle_t	Handle;
-    u_char		State;
-    u_int		Size;
-    u_int		Offset;
-    void		*Optional;
-} eraseq_entry_t;
-
-typedef struct eraseq_hdr_t {
-    int			QueueEntryCnt;
-    eraseq_entry_t	*QueueEntryArray;
-} eraseq_hdr_t;
-
-#define ERASE_QUEUED		0x00
-#define ERASE_IN_PROGRESS(n)	(((n) > 0) && ((n) < 0x80))
-#define ERASE_IDLE		0xff
-#define ERASE_PASSED		0xe0
-#define ERASE_FAILED		0xe1
-
-#define ERASE_MISSING		0x80
-#define ERASE_MEDIA_WRPROT	0x84
-#define ERASE_NOT_ERASABLE	0x85
-#define ERASE_BAD_OFFSET	0xc1
-#define ERASE_BAD_TECH		0xc2
-#define ERASE_BAD_SOCKET	0xc3
-#define ERASE_BAD_VCC		0xc4
-#define ERASE_BAD_VPP		0xc5
-#define ERASE_BAD_SIZE		0xc6
-
-/* For CopyMemory */
-typedef struct copy_op_t {
-    u_int		Attributes;
-    u_int		SourceOffset;
-    u_int		DestOffset;
-    u_int		Count;
-} copy_op_t;
-
-/* For ReadMemory and WriteMemory */
-typedef struct mem_op_t {
-    u_int	Attributes;
-    u_int	Offset;
-    u_int	Count;
-} mem_op_t;
-
-#define MEM_OP_BUFFER		0x01
-#define MEM_OP_BUFFER_USER	0x00
-#define MEM_OP_BUFFER_KERNEL	0x01
-#define MEM_OP_DISABLE_ERASE	0x02
-#define MEM_OP_VERIFY		0x04
-
-/* For RegisterMTD */
-typedef struct mtd_reg_t {
-    u_int	Attributes;
-    u_int	Offset;
-    u_long	MediaID;
-} mtd_reg_t;
-
-/*
- *  Definitions for MTD requests
- */
-
-typedef struct mtd_request_t {
-    u_int	SrcCardOffset;
-    u_int	DestCardOffset;
-    u_int	TransferLength;
-    u_int	Function;
-    u_long	MediaID;
-    u_int	Status;
-    u_int	Timeout;
-} mtd_request_t;
-
-/* Fields in MTD Function */
-#define MTD_REQ_ACTION		0x003
-#define MTD_REQ_ERASE		0x000
-#define MTD_REQ_READ		0x001
-#define MTD_REQ_WRITE		0x002
-#define MTD_REQ_COPY		0x003
-#define MTD_REQ_NOERASE		0x004
-#define MTD_REQ_VERIFY		0x008
-#define MTD_REQ_READY		0x010
-#define MTD_REQ_TIMEOUT		0x020
-#define MTD_REQ_LAST		0x040
-#define MTD_REQ_FIRST		0x080
-#define MTD_REQ_KERNEL		0x100
-
-/* Status codes */
-#define MTD_WAITREQ	0x00
-#define MTD_WAITTIMER	0x01
-#define MTD_WAITRDY	0x02
-#define MTD_WAITPOWER	0x03
-
-/*
- *  Definitions for MTD helper functions
- */
-
-/* For MTDModifyWindow */
-typedef struct mtd_mod_win_t {
-    u_int	Attributes;
-    u_int	AccessSpeed;
-    u_int	CardOffset;
-} mtd_mod_win_t;
-
-/* For MTDSetVpp */
-typedef struct mtd_vpp_req_t {
-    u_char	Vpp1, Vpp2;
-} mtd_vpp_req_t;
-
-/* For MTDRDYMask */
-typedef struct mtd_rdy_req_t {
-    u_int	Mask;
-} mtd_rdy_req_t;
-
-enum mtd_helper {
-    MTDRequestWindow, MTDModifyWindow, MTDReleaseWindow,
-    MTDSetVpp, MTDRDYMask
-};
-
-#ifdef IN_CARD_SERVICES
-extern int MTDHelperEntry(int func, void *a1, void *a2);
-#else
-extern int MTDHelperEntry(int func, ...);
-#endif
-
-#endif /* _LINUX_BULKMEM_H */
diff --git a/mdk-stage1/pcmcia_/cardmgr.c b/mdk-stage1/pcmcia_/cardmgr.c
deleted file mode 100644
index 1db18b55b..000000000
--- a/mdk-stage1/pcmcia_/cardmgr.c
+++ /dev/null
@@ -1,1652 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * Code comes from /anonymous@projects.sourceforge.net:/pub/pcmcia-cs/pcmcia-cs-3.1.29.tar.bz2
- *
- *   Licence of this code follows:
- *
- */
-/*======================================================================
-
-    PCMCIA Card Manager daemon
-
-    cardmgr.c 1.161 2001/08/24 12:19:19
-
-    The contents of this file are subject to the Mozilla Public
-    License Version 1.1 (the "License"); you may not use this file
-    except in compliance with the License. You may obtain a copy of
-    the License at http://www.mozilla.org/MPL/
-
-    Software distributed under the License is distributed on an "AS
-    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-    implied. See the License for the specific language governing
-    rights and limitations under the License.
-
-    The initial developer of the original code is David A. Hinds
-    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
-    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
-
-    Alternatively, the contents of this file may be used under the
-    terms of the GNU General Public License version 2 (the "GPL"), in
-    which case the provisions of the GPL are applicable instead of the
-    above.  If you wish to allow the use of your version of this file
-    only under the terms of the GPL and not to allow others to use
-    your version of this file under the MPL, indicate your decision
-    by deleting the provisions above and replace them with the notice
-    and other provisions required by the GPL.  If you do not delete
-    the provisions above, a recipient may use your version of this
-    file under either the MPL or the GPL.
-    
-======================================================================*/
-
-#ifndef __linux__
-#include <pcmcia/u_compat.h>
-#endif
-
-#include <sys/types.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <errno.h>
-//mdk-stage1// #include <syslog.h>
-//mdk-stage1// #include <getopt.h>
-#include <signal.h>
-#include <sys/time.h>
-#include <sys/ioctl.h>
-#include <sys/wait.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-#include <sys/file.h>
-
-#include <pcmcia_/version.h>
-//mdk-stage1// #include <pcmcia/config.h>
-#include <pcmcia_/cs_types.h>
-#include <pcmcia_/cs.h>
-#include <pcmcia_/cistpl.h>
-#include <pcmcia_/ds.h>
-
-#include "cardmgr.h"
-
-#include "../log.h"
-#include "modules.h"
-#include "pcmcia.h"
-
-/*====================================================================*/
-
-typedef struct socket_info_t {
-    int			fd;
-    int			state;
-    card_info_t		*card;
-    bind_info_t		*bind[MAX_BINDINGS];
-    mtd_ident_t		*mtd[2*CISTPL_MAX_DEVICES];
-} socket_info_t;
-
-#define SOCKET_PRESENT	0x01
-#define SOCKET_READY	0x02
-#define SOCKET_HOTPLUG	0x04
-
-/* Linked list of resource adjustments */
-struct adjust_list_t *root_adjust = NULL;
-
-/* Linked list of device definitions */
-struct device_info_t *root_device = NULL;
-
-/* Special pointer to "anonymous" card definition */
-struct card_info_t *blank_card = NULL;
-
-/* Linked list of card definitions */
-struct card_info_t *root_card = NULL;
-
-/* Linked list of function definitions */
-struct card_info_t *root_func = NULL;
-
-/* Linked list of MTD definitions */
-struct mtd_ident_t *root_mtd = NULL;
-
-/* Default MTD */
-struct mtd_ident_t *default_mtd = NULL;
-
-static int sockets;
-static struct socket_info_t socket[MAX_SOCKS];
-
-/* Default path for config file, device scripts */
-#ifdef ETC
-static char *configpath = ETC;
-#else
-static char *configpath = "/etc/pcmcia";
-#endif
-
-/* Default path for pid file */
-//mdk-stage1// static char *pidfile = "/var/run/cardmgr.pid";
-
-#ifdef __linux__
-/* Default path for finding modules */
-//mdk-stage1// static char *modpath = NULL;
-#endif
-
-/* Default path for socket info table */
-static char *stabfile;
-
-/* If set, don't generate beeps when cards are inserted */
-//mdk-stage1// static int be_quiet = 0;
-
-/* If set, use modprobe instead of insmod */
-//mdk-stage1// static int do_modprobe = 0;
-
-/* If set, configure already inserted cards, then exit */
-//mdk-stage1// static int one_pass = 0;
-
-/* Extra message logging? */
-//mdk-stage1// static int verbose = 0;
-
-/*====================================================================*/
-
-#ifdef __linux__
-
-static int major = 0;
-
-static int lookup_dev(char *name)
-{
-    FILE *f;
-    int n;
-    char s[32], t[32];
-    
-    f = fopen("/proc/devices", "r");
-    if (f == NULL)
-	return -errno;
-    while (fgets(s, 32, f) != NULL) {
-	if (sscanf(s, "%d %s", &n, t) == 2)
-	    if (strcmp(name, t) == 0)
-		break;
-    }
-    fclose(f);
-    if (strcmp(name, t) == 0)
-	return n;
-    else
-	return -ENODEV;
-}
-
-int open_dev(dev_t dev, int mode)
-{
-    char * fn = "/tmp/cardmgr_tmp";
-    int fd;
-
-    unlink(fn);
-	if (mknod(fn, mode, dev) != 0)
-		return -1;
-    fd = open(fn, (mode&S_IWRITE)?O_RDWR:O_RDONLY);
-    if (fd < 0)
-	fd = open(fn, O_NONBLOCK|((mode&S_IWRITE)?O_RDWR:O_RDONLY));
-    unlink(fn);
-    return fd;
-}
-
-#endif /* __linux__ */
-
-int open_sock(int sock, int mode)
-{
-#ifdef __linux__
-    dev_t dev = (major<<8)+sock;
-    return open_dev(dev, mode);
-#endif
-#ifdef __BEOS__
-    int fd;
-    char fn[B_OS_NAME_LENGTH];
-    sprintf(fn, "/dev/pcmcia/sock%d", sock);
-    return open(fn, (mode & S_IWRITE) ? O_RDWR: O_RDONLY);
-#endif
-}
-
-/*======================================================================
-
-    xlate_scsi_name() is a sort-of-hack used to deduce the minor
-    device numbers of SCSI devices, from the information available to
-    the low-level driver.
-    
-======================================================================*/
-
-#ifdef __linux__
-
-#include <linux/major.h>
-#include <scsi/scsi.h>
-//mdk-stage1// #define VERSION(v,p,s) (((v)<<16)+(p<<8)+s)
-//mdk-stage1// #if (LINUX_VERSION_CODE < VERSION(2,1,126))
-//mdk-stage1// #define SCSI_DISK0_MAJOR SCSI_DISK_MAJOR
-//mdk-stage1// #endif
-
-static int xlate_scsi_name(bind_info_t *bind)
-{
-    int i, fd, mode, minor;
-    u_long arg[2], id1, id2;
-
-    id1 = strtol(bind->name+3, NULL, 16);
-    if ((bind->major == SCSI_DISK0_MAJOR) ||
-	(bind->major == SCSI_CDROM_MAJOR))
-	mode = S_IREAD|S_IFBLK;
-    else
-	mode = S_IREAD|S_IFCHR;
-    
-    for (i = 0; i < 16; i++) {
-	minor = (bind->major == SCSI_DISK0_MAJOR) ? (i<<4) : i;
-	fd = open_dev((bind->major<<8)+minor, mode);
-	if (fd < 0)
-	    continue;
-	if (ioctl(fd, SCSI_IOCTL_GET_IDLUN, arg) == 0) {
-	    id2 = (arg[0]&0x0f) + ((arg[0]>>4)&0xf0) +
-		((arg[0]>>8)&0xf00) + ((arg[0]>>12)&0xf000);
-	    if (id1 == id2) {
-		close(fd);
-		switch (bind->major) {
-		case SCSI_DISK0_MAJOR:
-		case SCSI_GENERIC_MAJOR:
-		    sprintf(bind->name+2, "%c", 'a'+i); break;
-		case SCSI_CDROM_MAJOR:
-		    sprintf(bind->name, "scd%d", i); break;
-		case SCSI_TAPE_MAJOR:
-		    sprintf(bind->name+2, "%d", i); break;
-		}
-		bind->minor = minor;
-		return 0;
-	    }
-	}
-	close(fd);
-    }
-    return -1;
-}
-#endif
-
-/*====================================================================*/
-
-#define BEEP_TIME 150
-#define BEEP_OK   1000
-#define BEEP_WARN 2000
-#define BEEP_ERR  4000
-
-#ifdef __linux__
-
-//mdk-stage1// #include <sys/kd.h>
-//mdk-stage1// 
-static void beep(unsigned int ms, unsigned int freq)
-{
-//mdk-stage1//     int fd, arg;
-//mdk-stage1// 
-//mdk-stage1//     if (be_quiet)
-//mdk-stage1// 	return;
-//mdk-stage1//     fd = open("/dev/console", O_RDWR);
-//mdk-stage1//     if (fd < 0)
-//mdk-stage1// 	return;
-//mdk-stage1//     arg = (ms << 16) | freq;
-//mdk-stage1//     ioctl(fd, KDMKTONE, arg);
-//mdk-stage1//     close(fd);
-//mdk-stage1//     usleep(ms*1000);
-}
-
-#endif /* __linux__ */
-
-#ifdef __BEOS__
-static void beep(unsigned int ms, unsigned int freq)
-{
-    if (!be_quiet) system("/bin/beep");
-}
-#endif
-
-/*====================================================================*/
-
-//mdk-stage1// static void write_pid(void)
-//mdk-stage1// {
-//mdk-stage1//     FILE *f;
-//mdk-stage1//     f = fopen(pidfile, "w");
-//mdk-stage1//     if (f == NULL)
-//mdk-stage1// 	syslog(LOG_WARNING, "could not open %s: %m", pidfile);
-//mdk-stage1//     else {
-//mdk-stage1// 	fprintf(f, "%d\n", getpid());
-//mdk-stage1// 	fclose(f);
-//mdk-stage1//     }
-//mdk-stage1// }
-
-static void write_stab(void)
-{
-    int i, j, k;
-    FILE *f;
-    socket_info_t *s;
-    bind_info_t *bind;
-
-    f = fopen(stabfile, "w");
-    if (f == NULL) {
-	log_message("CM: fopen(stabfile) failed: %m");
-	return;
-    }
-#ifndef __BEOS__
-    if (flock(fileno(f), LOCK_EX) != 0) {
-	log_message("CM: flock(stabfile) failed: %m");
-	return;
-    }
-#endif
-    for (i = 0; i < sockets; i++) {
-	s = &socket[i];
-	fprintf(f, "Socket %d: ", i);
-	if (!(s->state & SOCKET_PRESENT)) {
-	    fprintf(f, "empty\n");
-//mdk-stage1// 	} else if (s->state & SOCKET_HOTPLUG) {
-//mdk-stage1// 	    fprintf(f, "CardBus hotplug device\n");
-	} else if (!s->card) {
-	    fprintf(f, "unsupported card\n");
-	} else {
-	    fprintf(f, "%s\n", s->card->name);
-	    for (j = 0; j < s->card->bindings; j++)
-		for (k = 0, bind = s->bind[j];
-		     bind != NULL;
-		     k++, bind = bind->next) {
-		    char *class = s->card->device[j]->class;
-		    fprintf(f, "%d\t%s\t%s\t%d\t%s",
-			    i, (class ? class : "none"),
-			    bind->dev_info, k, bind->name);
-		    if (bind->major)
-			fprintf(f, "\t%d\t%d\n",
-				bind->major, bind->minor);
-		    else
-			fputc('\n', f);
-		}
-	}
-    }
-    fflush(f);
-#ifndef __BEOS__
-    flock(fileno(f), LOCK_UN);
-#endif
-    fclose(f);
-}
-
-/*====================================================================*/
-
-static int get_tuple(int ns, cisdata_t code, ds_ioctl_arg_t *arg)
-{
-    socket_info_t *s = &socket[ns];
-    
-    arg->tuple.DesiredTuple = code;
-    arg->tuple.Attributes = 0;
-    if (ioctl(s->fd, DS_GET_FIRST_TUPLE, arg) != 0)
-	return -1;
-    arg->tuple.TupleOffset = 0;
-    if (ioctl(s->fd, DS_GET_TUPLE_DATA, arg) != 0) {
-	log_message("CM: error reading CIS data on socket %d: %m", ns);
-	return -1;
-    }
-    if (ioctl(s->fd, DS_PARSE_TUPLE, arg) != 0) {
-	log_message("CM: error parsing CIS on socket %d: %m", ns);
-	return -1;
-    }
-    return 0;
-}
-
-/*======================================================================
-
-    Code to fetch a 2.4 kernel's hot plug PCI driver list
-
-    This is distasteful but is the best I could come up with.
-
-======================================================================*/
-
-#ifdef __linux__
-
-typedef struct pci_id {
-    u_short vendor, device;
-    struct pci_id *next;
-} pci_id_t;
-
-static int get_pci_id(int ns, pci_id_t *id)
-{
-    socket_info_t *s = &socket[ns];
-    config_info_t config;
-
-    config.Function = config.ConfigBase = 0;
-    if ((ioctl(s->fd, DS_GET_CONFIGURATION_INFO, &config) != 0) ||
-	(config.IntType != INT_CARDBUS) || !config.ConfigBase)
-	return 0;
-    id->vendor = config.ConfigBase & 0xffff;
-    id->device = config.ConfigBase >> 16;
-    return 1;
-}
-
-#endif /* __linux__ */
-
-/*====================================================================*/
-
-//mdk-stage1// static void log_card_info(cistpl_vers_1_t *vers,
-//mdk-stage1// 			  cistpl_manfid_t *manfid,
-//mdk-stage1// 			  cistpl_funcid_t *funcid,
-//mdk-stage1// 			  pci_id_t *pci_id)
-//mdk-stage1// {
-//mdk-stage1//     char v[256] = "";
-//mdk-stage1//     int i;
-//mdk-stage1//     static char *fn[] = {
-//mdk-stage1// 	"multi", "memory", "serial", "parallel", "fixed disk",
-//mdk-stage1// 	"video", "network", "AIMS", "SCSI"
-//mdk-stage1//     };
-//mdk-stage1//     
-//mdk-stage1//     if (vers) {
-//mdk-stage1// 	for (i = 0; i < vers->ns; i++)
-//mdk-stage1// 	    sprintf(v+strlen(v), "%s\"%s\"",
-//mdk-stage1// 		    (i>0) ? ", " : "", vers->str+vers->ofs[i]);
-//mdk-stage1// 	syslog(LOG_INFO, "  product info: %s", v);
-//mdk-stage1//     } else {
-//mdk-stage1// 	syslog(LOG_INFO, "  no product info available");
-//mdk-stage1//     }
-//mdk-stage1//     *v = '\0';
-//mdk-stage1//     if (manfid->manf != 0)
-//mdk-stage1// 	sprintf(v, "  manfid: 0x%04x, 0x%04x",
-//mdk-stage1// 		manfid->manf, manfid->card);
-//mdk-stage1//     if (funcid->func != 0xff)
-//mdk-stage1// 	sprintf(v+strlen(v), "  function: %d (%s)", funcid->func,
-//mdk-stage1// 		fn[funcid->func]);
-//mdk-stage1//     if (strlen(v) > 0) syslog(LOG_INFO, "%s", v);
-//mdk-stage1//     if (pci_id->vendor != 0)
-//mdk-stage1// 	syslog(LOG_INFO, "  PCI id: 0x%04x, 0x%04x",
-//mdk-stage1// 	       pci_id->vendor, pci_id->device);
-//mdk-stage1// }
-
-static card_info_t *lookup_card(int ns)
-{
-    socket_info_t *s = &socket[ns];
-    card_info_t *card = NULL;
-    ds_ioctl_arg_t arg;
-    cistpl_vers_1_t *vers = NULL;
-    cistpl_manfid_t manfid = { 0, 0 };
-    pci_id_t pci_id = { 0, 0 };
-    cistpl_funcid_t funcid = { 0xff, 0xff };
-    cs_status_t status;
-    int i, ret, has_cis = 0;
-
-    /* Do we have a CIS structure? */
-    ret = ioctl(s->fd, DS_VALIDATE_CIS, &arg);
-    has_cis = ((ret == 0) && (arg.cisinfo.Chains > 0));
-    
-    /* Try to read VERS_1, MANFID tuples */
-    if (has_cis) {
-	/* rule of thumb: cards with no FUNCID, but with common memory
-	   device geometry information, are probably memory cards */
-	if (get_tuple(ns, CISTPL_FUNCID, &arg) == 0)
-	    memcpy(&funcid, &arg.tuple_parse.parse.funcid,
-		   sizeof(funcid));
-	else if (get_tuple(ns, CISTPL_DEVICE_GEO, &arg) == 0)
-	    funcid.func = CISTPL_FUNCID_MEMORY;
-	if (get_tuple(ns, CISTPL_MANFID, &arg) == 0)
-	    memcpy(&manfid, &arg.tuple_parse.parse.manfid,
-		   sizeof(manfid));
-	if (get_tuple(ns, CISTPL_VERS_1, &arg) == 0)
-	    vers = &arg.tuple_parse.parse.version_1;
-
-	for (card = root_card; card; card = card->next) {
-
-	    if (card->ident_type &
-		~(VERS_1_IDENT|MANFID_IDENT|TUPLE_IDENT))
-		continue;
-
-	    if (card->ident_type & VERS_1_IDENT) {
-		if (vers == NULL)
-		    continue;
-		for (i = 0; i < card->id.vers.ns; i++) {
-		    if (strcmp(card->id.vers.pi[i], "*") == 0)
-			continue;
-		    if (i >= vers->ns)
-			break;
-		    if (strcmp(card->id.vers.pi[i],
-			       vers->str+vers->ofs[i]) != 0)
-			break;
-		}
-		if (i < card->id.vers.ns)
-		    continue;
-	    }
-	    
-	    if (card->ident_type & MANFID_IDENT) {
-		if ((manfid.manf != card->manfid.manf) ||
-		    (manfid.card != card->manfid.card))
-		    continue;
-	    }
-		
-	    if (card->ident_type & TUPLE_IDENT) {
-		arg.tuple.DesiredTuple = card->id.tuple.code;
-		arg.tuple.Attributes = 0;
-		ret = ioctl(s->fd, DS_GET_FIRST_TUPLE, &arg);
-		if (ret != 0) continue;
-		arg.tuple.TupleOffset = card->id.tuple.ofs;
-		ret = ioctl(s->fd, DS_GET_TUPLE_DATA, &arg);
-		if (ret != 0) continue;
-		if (strncmp((char *)arg.tuple_parse.data,
-			    card->id.tuple.info,
-			    strlen(card->id.tuple.info)) != 0)
-		    continue;
-	    }
-
-	    break; /* we have a match */
-	}
-    }
-
-    /* Check PCI vendor/device info */
-    status.Function = 0;
-    ioctl(s->fd, DS_GET_STATUS, &status);
-    if (status.CardState & CS_EVENT_CB_DETECT) {
-	if (get_pci_id(ns, &pci_id)) {
-	    if (!card) {
-		for (card = root_card; card; card = card->next)
-		    if ((card->ident_type == PCI_IDENT) &&
-			(pci_id.vendor == card->manfid.manf) &&
-			(pci_id.device == card->manfid.card))
-			break;
-	    }
-	} else {
-	    /* this is a 2.4 kernel; hotplug handles these cards */
-//mdk-stage1//	    s->state |= SOCKET_HOTPLUG;
-	    log_message("CM: socket %d: CardBus hotplug device", ns);
-	    //beep(BEEP_TIME, BEEP_OK);
-//mdk-stage1//	    return NULL;
-	}
-    }
-
-    /* Try for a FUNCID match */
-    if (!card && (funcid.func != 0xff)) {
-	for (card = root_func; card; card = card->next)
-	    if (card->id.func.funcid == funcid.func)
-		break;
-    }
-
-    if (card) {
-	log_message("CM: socket %d: %s", ns, card->name);
- 	beep(BEEP_TIME, BEEP_OK);
-//mdk-stage1// 	if (verbose) log_card_info(vers, &manfid, &funcid, &pci_id);
-	return card;
-    }
-
-    if (!blank_card || (status.CardState & CS_EVENT_CB_DETECT) ||
-	manfid.manf || manfid.card || pci_id.vendor || vers) {
-	log_message("CM: unsupported card in socket %d", ns);
-//mdk-stage1// 	if (one_pass) return NULL;
-	beep(BEEP_TIME, BEEP_ERR);
-//mdk-stage1// 	log_card_info(vers, &manfid, &funcid, &pci_id);
-	return NULL;
-    } else {
-	card = blank_card;
-	log_message("CM: socket %d: %s", ns, card->name);
- 	beep(BEEP_TIME, BEEP_WARN);
-	return card;
-    }
-}
-
-/*====================================================================*/
-
-static int load_config(void)
-{
-    if (chdir(configpath) != 0) {
-	    log_message("CM: chdir to %s failed: %m", configpath);
-	    return -1;
-    }
-    if (parse_configfile("config") != 0) {
-	    log_message("CM: parsing of config file failed: %m");
-	    return -1;
-    }
-    if (root_device == NULL)
-		log_message("CM: no device drivers defined");
-    if ((root_card == NULL) && (root_func == NULL))
-		log_message("CM: no cards defined");
-    return 0;
-}
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static void free_card(card_info_t *card)
-//mdk-stage1// {
-//mdk-stage1//     if (card && (--card->refs == 0)) {
-//mdk-stage1// 	int i;
-//mdk-stage1// 	free(card->name);
-//mdk-stage1// 	switch(card->ident_type) {
-//mdk-stage1// 	case VERS_1_IDENT:
-//mdk-stage1// 	    for (i = 0; i < card->id.vers.ns; i++)
-//mdk-stage1// 		free(card->id.vers.pi[i]);
-//mdk-stage1// 	break;
-//mdk-stage1// 	case TUPLE_IDENT:
-//mdk-stage1// 	    free(card->id.tuple.info);
-//mdk-stage1// 	    break;
-//mdk-stage1// 	default:
-//mdk-stage1// 	    break;
-//mdk-stage1// 	}
-//mdk-stage1// 	free(card);
-//mdk-stage1//     }
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// static void free_device(device_info_t *dev)
-//mdk-stage1// {
-//mdk-stage1//     if (dev && (--dev->refs == 0)) {
-//mdk-stage1// 	int i;
-//mdk-stage1// 	for (i = 0; i < dev->modules; i++) {
-//mdk-stage1// 	    free(dev->module[i]);
-//mdk-stage1// 	    if (dev->opts[i]) free(dev->opts[i]);
-//mdk-stage1// 	}
-//mdk-stage1// 	if (dev->class) free(dev->class);
-//mdk-stage1// 	free(dev);
-//mdk-stage1//     }
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// static void free_mtd(mtd_ident_t *mtd)
-//mdk-stage1// {
-//mdk-stage1//     if (mtd && (--mtd->refs == 0)) {
-//mdk-stage1// 	free(mtd->name);
-//mdk-stage1// 	free(mtd->module);
-//mdk-stage1// 	free(mtd);
-//mdk-stage1//     }
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// static void free_config(void)
-//mdk-stage1// {
-//mdk-stage1//     while (root_adjust != NULL) {
-//mdk-stage1// 	adjust_list_t *adj = root_adjust;
-//mdk-stage1// 	root_adjust = root_adjust->next;
-//mdk-stage1// 	free(adj);
-//mdk-stage1//     }
-//mdk-stage1//     
-//mdk-stage1//     while (root_device != NULL) {
-//mdk-stage1// 	device_info_t *dev = root_device;
-//mdk-stage1// 	root_device = root_device->next;
-//mdk-stage1// 	free_device(dev);
-//mdk-stage1//     }
-//mdk-stage1// 
-//mdk-stage1//     while (root_card != NULL) {
-//mdk-stage1// 	card_info_t *card = root_card;
-//mdk-stage1// 	root_card = root_card->next;
-//mdk-stage1// 	free_card(card);
-//mdk-stage1//     }
-//mdk-stage1//     
-//mdk-stage1//     while (root_func != NULL) {
-//mdk-stage1// 	card_info_t *card = root_func;
-//mdk-stage1// 	root_func = root_func->next;
-//mdk-stage1// 	free_card(card);
-//mdk-stage1//     }
-//mdk-stage1//     blank_card = NULL;
-//mdk-stage1//     
-//mdk-stage1//     while (root_mtd != NULL) {
-//mdk-stage1// 	mtd_ident_t *mtd = root_mtd;
-//mdk-stage1// 	root_mtd = root_mtd->next;
-//mdk-stage1// 	free_mtd(mtd);
-//mdk-stage1//     }
-//mdk-stage1//     default_mtd = NULL;
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static int execute(char *msg, char *cmd)
-//mdk-stage1// {
-//mdk-stage1//     int ret;
-//mdk-stage1//     FILE *f;
-//mdk-stage1//     char line[256];
-//mdk-stage1// 
-//mdk-stage1//     syslog(LOG_INFO, "executing: '%s'", cmd);
-//mdk-stage1//     strcat(cmd, " 2>&1");
-//mdk-stage1//     f = popen(cmd, "r");
-//mdk-stage1//     while (fgets(line, 255, f)) {
-//mdk-stage1// 	line[strlen(line)-1] = '\0';
-//mdk-stage1// 	syslog(LOG_INFO, "+ %s", line);
-//mdk-stage1//     }
-//mdk-stage1//     ret = pclose(f);
-//mdk-stage1//     if (WIFEXITED(ret)) {
-//mdk-stage1// 	if (WEXITSTATUS(ret))
-//mdk-stage1// 	    syslog(LOG_INFO, "%s exited with status %d",
-//mdk-stage1// 		   msg, WEXITSTATUS(ret));
-//mdk-stage1// 	return WEXITSTATUS(ret);
-//mdk-stage1//     } else
-//mdk-stage1// 	syslog(LOG_INFO, "%s exited on signal %d",
-//mdk-stage1// 	       msg, WTERMSIG(ret));
-//mdk-stage1//     return -1;
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static int execute_on_dev(char *action, char *class, char *dev)
-//mdk-stage1// {
-//mdk-stage1//     /* Fixed length strings are ok here */
-//mdk-stage1//     char msg[128], cmd[128];
-//mdk-stage1// 
-//mdk-stage1//     sprintf(msg, "%s cmd", action);
-//mdk-stage1//     sprintf(cmd, "./%s %s %s", class, action, dev);
-//mdk-stage1//     return execute(msg, cmd);
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// static int execute_on_all(char *cmd, char *class, int sn, int fn)
-//mdk-stage1// {
-//mdk-stage1//     socket_info_t *s = &socket[sn];
-//mdk-stage1//     bind_info_t *bind;
-//mdk-stage1//     int ret = 0;
-//mdk-stage1//     for (bind = s->bind[fn]; bind != NULL; bind = bind->next)
-//mdk-stage1// 	if (bind->name[0] && (bind->name[2] != '#'))
-//mdk-stage1// 	    ret |= execute_on_dev(cmd, class, bind->name);
-//mdk-stage1//     return ret;
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// #ifdef __linux__
-//mdk-stage1// 
-//mdk-stage1// typedef struct module_list_t {
-//mdk-stage1//     char *mod;
-//mdk-stage1//     int usage;
-//mdk-stage1//     struct module_list_t *next;
-//mdk-stage1// } module_list_t;
-//mdk-stage1// 
-//mdk-stage1// static module_list_t *module_list = NULL;
-//mdk-stage1// 
-//mdk-stage1// static int try_insmod(char *mod, char *opts)
-//mdk-stage1// {
-//mdk-stage1//     char *cmd = malloc(strlen(mod) + strlen(modpath) +
-//mdk-stage1// 		       (opts ? strlen(opts) : 0) + 30);
-//mdk-stage1//     int ret;
-//mdk-stage1// 
-//mdk-stage1//     strcpy(cmd, "insmod ");
-//mdk-stage1//     if (strchr(mod, '/') != NULL)
-//mdk-stage1// 	sprintf(cmd+7, "%s/%s.o", modpath, mod);
-//mdk-stage1//     else
-//mdk-stage1// 	sprintf(cmd+7, "%s/pcmcia/%s.o", modpath, mod);
-//mdk-stage1//     if (access(cmd+7, R_OK) != 0) {
-//mdk-stage1// 	syslog(LOG_INFO, "module %s not available", cmd+7);
-//mdk-stage1// 	free(cmd);
-//mdk-stage1// 	return -1;
-//mdk-stage1//     }
-//mdk-stage1//     if (opts) {
-//mdk-stage1// 	strcat(cmd, " ");
-//mdk-stage1// 	strcat(cmd, opts);
-//mdk-stage1//     }
-//mdk-stage1//     ret = execute("insmod", cmd);
-//mdk-stage1//     free(cmd);
-//mdk-stage1//     return ret;
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// static int try_modprobe(char *mod, char *opts)
-//mdk-stage1// {
-//mdk-stage1//     char *cmd = malloc(strlen(mod) + (opts ? strlen(opts) : 0) + 20);
-//mdk-stage1//     char *s = strrchr(mod, '/');
-//mdk-stage1//     int ret;
-//mdk-stage1// 
-//mdk-stage1//     sprintf(cmd, "modprobe %s", (s) ? s+1 : mod);
-//mdk-stage1//     if (opts) {
-//mdk-stage1// 	strcat(cmd, " ");
-//mdk-stage1// 	strcat(cmd, opts);
-//mdk-stage1//     }
-//mdk-stage1//     ret = execute("modprobe", cmd);
-//mdk-stage1//     free(cmd);
-//mdk-stage1//     return ret;
-//mdk-stage1// }
-
-static void install_module(char *mod, char *opts)
-{
-	my_insmod(mod, ANY_DRIVER_TYPE, opts);
-//mdk-stage1//     module_list_t *ml;
-//mdk-stage1// 
-//mdk-stage1//     for (ml = module_list; ml != NULL; ml = ml->next)
-//mdk-stage1// 	if (strcmp(mod, ml->mod) == 0) break;
-//mdk-stage1//     if (ml == NULL) {
-//mdk-stage1// 	ml = (module_list_t *)malloc(sizeof(struct module_list_t));
-//mdk-stage1// 	ml->mod = mod;
-//mdk-stage1// 	ml->usage = 0;
-//mdk-stage1// 	ml->next = module_list;
-//mdk-stage1// 	module_list = ml;
-//mdk-stage1//     }
-//mdk-stage1//     ml->usage++;
-//mdk-stage1//     if (ml->usage != 1)
-//mdk-stage1// 	return;
-//mdk-stage1// 
-//mdk-stage1// #ifdef __linux__
-//mdk-stage1//     if (access("/proc/bus/pccard/drivers", R_OK) == 0) {
-//mdk-stage1// 	FILE *f = fopen("/proc/bus/pccard/drivers", "r");
-//mdk-stage1// 	if (f) {
-//mdk-stage1// 	    char a[61], s[33];
-//mdk-stage1// 	    while (fgets(a, 60, f)) {
-//mdk-stage1// 		int is_kernel;
-//mdk-stage1// 		sscanf(a, "%s %d", s, &is_kernel);
-//mdk-stage1// 		if (strcmp(s, mod) != 0) continue;
-//mdk-stage1// 		/* If it isn't a module, we won't try to rmmod */
-//mdk-stage1// 		ml->usage += is_kernel;
-//mdk-stage1// 		fclose(f);
-//mdk-stage1// 		return;
-//mdk-stage1// 	    }
-//mdk-stage1// 	    fclose(f);
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1// #endif
-//mdk-stage1// 
-//mdk-stage1//     if (do_modprobe) {
-//mdk-stage1// 	if (try_modprobe(mod, opts) != 0)
-//mdk-stage1// 	    try_insmod(mod, opts);
-//mdk-stage1//     } else {
-//mdk-stage1// 	if (try_insmod(mod, opts) != 0)
-//mdk-stage1// 	    try_modprobe(mod, opts);
-//mdk-stage1//     }
-}
-
-//mdk-stage1// static void remove_module(char *mod)
-//mdk-stage1// {
-//mdk-stage1//     char *s, cmd[128];
-//mdk-stage1//     module_list_t *ml;
-//mdk-stage1// 
-//mdk-stage1//     for (ml = module_list; ml != NULL; ml = ml->next)
-//mdk-stage1// 	if (strcmp(mod, ml->mod) == 0) break;
-//mdk-stage1//     if (ml != NULL) {
-//mdk-stage1// 	ml->usage--;
-//mdk-stage1// 	if (ml->usage == 0) {
-//mdk-stage1// 	    /* Strip off leading path names */
-//mdk-stage1// 	    s = strrchr(mod, '/');
-//mdk-stage1// 	    s = (s) ? s+1 : mod;
-//mdk-stage1// 	    sprintf(cmd, do_modprobe ? "modprobe -r %s" : "rmmod %s", s);
-//mdk-stage1// 	    execute(do_modprobe ? "modprobe" : "rmmod", cmd);
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// #endif /* __linux__ */
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// #ifdef __BEOS__
-//mdk-stage1// 
-//mdk-stage1// #define install_module(a,b)
-//mdk-stage1// #define remove_module(a)
-//mdk-stage1// 
-//mdk-stage1// static void republish_driver(char *mod)
-//mdk-stage1// {
-//mdk-stage1//     int fd = open("/dev", O_RDWR);
-//mdk-stage1//     write(fd, mod, strlen(mod));
-//mdk-stage1//     close(fd);
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// #endif /* __BEOS__ */
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-
-static mtd_ident_t *lookup_mtd(region_info_t *region)
-{
-    mtd_ident_t *mtd;
-    int match = 0;
-    
-    for (mtd = root_mtd; mtd; mtd = mtd->next) {
-	switch (mtd->mtd_type) {
-	case JEDEC_MTD:
-	    if ((mtd->jedec_mfr == region->JedecMfr) &&
-		(mtd->jedec_info == region->JedecInfo)) {
-		match = 1;
-		break;
-	    }
-	case DTYPE_MTD:
-	    break;
-	default:
-	    break;
-	}
-	if (match) break;
-    }
-    if (mtd)
-	return mtd;
-    else
-	return default_mtd;
-}
-
-/*====================================================================*/
-
-static void bind_mtd(int sn)
-{
-    socket_info_t *s = &socket[sn];
-    region_info_t region;
-    bind_info_t bind;
-    mtd_info_t mtd_info;
-    mtd_ident_t *mtd;
-    int i, attr, ret, nr;
-
-    nr = 0;
-    for (attr = 0; attr < 2; attr++) {
-	region.Attributes = attr;
-	ret = ioctl(s->fd, DS_GET_FIRST_REGION, &region);
-	while (ret == 0) {
-	    mtd = lookup_mtd(&region);
-	    if (mtd) {
-		/* Have we seen this MTD before? */
-		for (i = 0; i < nr; i++)
-		    if (s->mtd[i] == mtd) break;
-		if (i == nr) {
-		    install_module(mtd->module, mtd->opts);
-		    s->mtd[nr] = mtd;
-		    mtd->refs++;
-		    nr++;
-		}
-		log_message("CM: %s memory region at 0x%x: %s",
-		       attr ? "Attribute" : "Common", region.CardOffset,
-		       mtd->name);
-		/* Bind MTD to this region */
-		strcpy(mtd_info.dev_info, s->mtd[i]->module);
-		mtd_info.Attributes = region.Attributes;
-		mtd_info.CardOffset = region.CardOffset;
-		if (ioctl(s->fd, DS_BIND_MTD, &mtd_info) != 0) {
-		    log_message("CM: bind MTD '%s' to region at 0x%x failed: %m",
-			   (char *)mtd_info.dev_info, region.CardOffset);
-		}
-	    }
-	    ret = ioctl(s->fd, DS_GET_NEXT_REGION, &region);
-	}
-    }
-    s->mtd[nr] = NULL;
-    
-    /* Now bind each unique MTD as a normal client of this socket */
-    for (i = 0; i < nr; i++) {
-	strcpy(bind.dev_info, s->mtd[i]->module);
-	bind.function = 0;
-	if (ioctl(s->fd, DS_BIND_REQUEST, &bind) != 0)
-	    log_message("CM: bind MTD '%s' to socket %d failed: %m",
-		   (char *)bind.dev_info, sn);
-    }
-}
-
-/*====================================================================*/
-
-static void update_cis(socket_info_t *s)
-{
-    cisdump_t cis;
-    FILE *f = fopen(s->card->cis_file, "r");
-    if (f == NULL)
-	log_message("CM: could not open '%s': %m", s->card->cis_file);
-    else {
-	cis.Length = fread(cis.Data, 1, CISTPL_MAX_CIS_SIZE, f);
-	fclose(f);
-	if (ioctl(s->fd, DS_REPLACE_CIS, &cis) != 0)
-	    log_message("CM: could not replace CIS: %m");
-    }
-}
-
-/*====================================================================*/
-
-static void do_insert(int sn)
-{
-    socket_info_t *s = &socket[sn];
-    card_info_t *card;
-    device_info_t **dev;
-    bind_info_t *bind, **tail;
-    int i, j, ret;
-
-    /* Already identified? */
-    if ((s->card != NULL) && (s->card != blank_card))
-	return;
-
-    log_message("CM: initializing socket %d", sn);
-    card = lookup_card(sn);
-    if (s->state & SOCKET_HOTPLUG) {
-	write_stab();
-	return;
-    }
-    /* Make sure we've learned something new before continuing */
-    if (card == s->card)
-	return;
-    s->card = card;
-    card->refs++;
-    if (card->cis_file) update_cis(s);
-
-    dev = card->device;
-
-    /* Set up MTD's */
-    for (i = 0; i < card->bindings; i++)
-	if (dev[i]->needs_mtd)
-	    break;
-    if (i < card->bindings)
-	bind_mtd(sn);
-
-#ifdef __linux__
-    /* Install kernel modules */
-    for (i = 0; i < card->bindings; i++) {
-	dev[i]->refs++;
-	for (j = 0; j < dev[i]->modules; j++)
-	    install_module(dev[i]->module[j], dev[i]->opts[j]);
-    }
-#endif
-    
-    /* Bind drivers by their dev_info identifiers */
-    for (i = 0; i < card->bindings; i++) {
-	bind = calloc(1, sizeof(bind_info_t));
-	strcpy((char *)bind->dev_info, (char *)dev[i]->dev_info);
-	if (strcmp(bind->dev_info, "cb_enabler") == 0)
-	    bind->function = BIND_FN_ALL;
-	else
-	    bind->function = card->dev_fn[i];
-	if (ioctl(s->fd, DS_BIND_REQUEST, bind) != 0) {
-	    if (errno == EBUSY) {
-		log_message("CM: '%s' already bound to socket %d",
-		       (char *)bind->dev_info, sn);
-	    } else {
-		log_message("CM: bind '%s' to socket %d failed: %m",
-		       (char *)bind->dev_info, sn);
-		beep(BEEP_TIME, BEEP_ERR);
-		write_stab();
-		return;
-	    }
-	}
-
-#ifdef __BEOS__
-	republish_driver(dev[i]->module[0]);
-#endif
-
-	for (ret = j = 0; j < 10; j++) {
-	    ret = ioctl(s->fd, DS_GET_DEVICE_INFO, bind);
-	    if ((ret == 0) || (errno != EAGAIN))
-		break;
-	    usleep(100000);
-	}
-	if (ret != 0) {
-	    log_message("CM: get dev info on socket %d failed: %m",
-		   sn);
-	    ioctl(s->fd, DS_UNBIND_REQUEST, bind);
-	    beep(BEEP_TIME, BEEP_ERR);
-	    write_stab();
-	    return;
-	}
-	tail = &s->bind[i];
-	while (ret == 0) {
-	    bind_info_t *old;
-#ifdef __linux__
-	    if ((strlen(bind->name) > 3) && (bind->name[2] == '#'))
-		xlate_scsi_name(bind);
-#endif
-	    old = *tail = bind; tail = (bind_info_t **)&bind->next;
-	    bind = (bind_info_t *)malloc(sizeof(bind_info_t));
-	    memcpy(bind, old, sizeof(bind_info_t));
-	    ret = ioctl(s->fd, DS_GET_NEXT_DEVICE, bind);
-	}
-	*tail = NULL; free(bind);
-	write_stab();
-    }
-
-//mdk-stage1//     /* Run "start" commands */
-//mdk-stage1//     for (i = ret = 0; i < card->bindings; i++)
-//mdk-stage1// 	if (dev[i]->class)
-//mdk-stage1// 	    ret |= execute_on_all("start", dev[i]->class, sn, i);
-//mdk-stage1//     beep(BEEP_TIME, (ret) ? BEEP_ERR : BEEP_OK);
-    
-}
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static int do_check(int sn)
-//mdk-stage1// {
-//mdk-stage1//     socket_info_t *s = &socket[sn];
-//mdk-stage1//     card_info_t *card;
-//mdk-stage1//     device_info_t **dev;
-//mdk-stage1//     int i, ret;
-//mdk-stage1// 
-//mdk-stage1//     card = s->card;
-//mdk-stage1//     if (card == NULL)
-//mdk-stage1// 	return 0;
-//mdk-stage1//     
-//mdk-stage1//     /* Run "check" commands */
-//mdk-stage1//     dev = card->device;
-//mdk-stage1//     for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// 	if (dev[i]->class) {
-//mdk-stage1// 	    ret = execute_on_all("check", dev[i]->class, sn, i);
-//mdk-stage1// 	    if (ret != 0)
-//mdk-stage1// 		return CS_IN_USE;
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1//     return 0;
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static void do_remove(int sn)
-//mdk-stage1// {
-//mdk-stage1//     socket_info_t *s = &socket[sn];
-//mdk-stage1//     card_info_t *card;
-//mdk-stage1//     device_info_t **dev;
-//mdk-stage1//     bind_info_t *bind;
-//mdk-stage1//     int i, j;
-//mdk-stage1// 
-//mdk-stage1//     if (verbose) syslog(LOG_INFO, "shutting down socket %d", sn);
-//mdk-stage1// 
-//mdk-stage1//     card = s->card;
-//mdk-stage1//     if (card == NULL)
-//mdk-stage1// 	goto done;
-//mdk-stage1// 
-//mdk-stage1//     /* Run "stop" commands */
-//mdk-stage1//     dev = card->device;
-//mdk-stage1//     for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// 	if (dev[i]->class) {
-//mdk-stage1// 	    execute_on_all("stop", dev[i]->class, sn, i);
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1// 
-//mdk-stage1//     /* unbind driver instances */
-//mdk-stage1//     for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// 	if (s->bind[i]) {
-//mdk-stage1// 	    if (ioctl(s->fd, DS_UNBIND_REQUEST, s->bind[i]) != 0)
-//mdk-stage1// 		syslog(LOG_INFO, "unbind '%s' from socket %d failed: %m",
-//mdk-stage1// 		       (char *)s->bind[i]->dev_info, sn);
-//mdk-stage1// 	    while (s->bind[i]) {
-//mdk-stage1// 		bind = s->bind[i];
-//mdk-stage1// 		s->bind[i] = bind->next;
-//mdk-stage1// 		free(bind);
-//mdk-stage1// 	    }
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1//     for (i = 0; (s->mtd[i] != NULL); i++) {
-//mdk-stage1// 	bind_info_t b;
-//mdk-stage1// 	strcpy(b.dev_info, s->mtd[i]->module);
-//mdk-stage1// 	b.function = 0;
-//mdk-stage1// 	if (ioctl(s->fd, DS_UNBIND_REQUEST, &b) != 0)
-//mdk-stage1// 	    syslog(LOG_INFO, "unbind MTD '%s' from socket %d failed: %m",
-//mdk-stage1// 		   s->mtd[i]->module, sn);
-//mdk-stage1//     }
-//mdk-stage1// 
-//mdk-stage1//     /* remove kernel modules in inverse order */
-//mdk-stage1//     for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// 	for (j = dev[i]->modules-1; j >= 0; j--)
-//mdk-stage1// 	    remove_module(dev[i]->module[j]);
-//mdk-stage1// 	free_device(dev[i]);
-//mdk-stage1//     }
-//mdk-stage1//     /* Remove any MTD's bound to this socket */
-//mdk-stage1//     for (i = 0; (s->mtd[i] != NULL); i++) {
-//mdk-stage1// 	remove_module(s->mtd[i]->module);
-//mdk-stage1// 	free_mtd(s->mtd[i]);
-//mdk-stage1// 	s->mtd[i] = NULL;
-//mdk-stage1//     }
-//mdk-stage1// 
-//mdk-stage1// done:
-//mdk-stage1//     beep(BEEP_TIME, BEEP_OK);
-//mdk-stage1//     free_card(card);
-//mdk-stage1//     s->card = NULL;
-//mdk-stage1//     write_stab();
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static void do_suspend(int sn)
-//mdk-stage1// {
-//mdk-stage1//     socket_info_t *s = &socket[sn];
-//mdk-stage1//     card_info_t *card;
-//mdk-stage1//     device_info_t **dev;
-//mdk-stage1//     int i, ret;
-//mdk-stage1//     
-//mdk-stage1//     card = s->card;
-//mdk-stage1//     if (card == NULL)
-//mdk-stage1// 	return;
-//mdk-stage1//     dev = card->device;
-//mdk-stage1//     for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// 	if (dev[i]->class) {
-//mdk-stage1// 	    ret = execute_on_all("suspend", dev[i]->class, sn, i);
-//mdk-stage1// 	    if (ret != 0)
-//mdk-stage1// 		beep(BEEP_TIME, BEEP_ERR);
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static void do_resume(int sn)
-//mdk-stage1// {
-//mdk-stage1//     socket_info_t *s = &socket[sn];
-//mdk-stage1//     card_info_t *card;
-//mdk-stage1//     device_info_t **dev;
-//mdk-stage1//     int i, ret;
-//mdk-stage1//     
-//mdk-stage1//     card = s->card;
-//mdk-stage1//     if (card == NULL)
-//mdk-stage1// 	return;
-//mdk-stage1//     dev = card->device;
-//mdk-stage1//     for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// 	if (dev[i]->class) {
-//mdk-stage1// 	    ret = execute_on_all("resume", dev[i]->class, sn, i);
-//mdk-stage1// 	    if (ret != 0)
-//mdk-stage1// 		beep(BEEP_TIME, BEEP_ERR);
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1// }
-
-/*====================================================================*/
-
-static void wait_for_pending(void)
-{
-    cs_status_t status;
-    int i;
-    status.Function = 0;
-    for (;;) {
-	usleep(100000);
-	for (i = 0; i < sockets; i++)
-	    if ((ioctl(socket[i].fd, DS_GET_STATUS, &status) == 0) &&
-		(status.CardState & CS_EVENT_CARD_INSERTION))
-		break;
-	if (i == sockets) break;
-    }
-}
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static void free_resources(void)
-//mdk-stage1// {
-//mdk-stage1//     adjust_list_t *al;
-//mdk-stage1//     int fd = socket[0].fd;
-//mdk-stage1// 
-//mdk-stage1//     for (al = root_adjust; al; al = al->next) {
-//mdk-stage1// 	if (al->adj.Action == ADD_MANAGED_RESOURCE) {
-//mdk-stage1// 	    al->adj.Action = REMOVE_MANAGED_RESOURCE;
-//mdk-stage1// 	    ioctl(fd, DS_ADJUST_RESOURCE_INFO, &al->adj);
-//mdk-stage1// 	} else if ((al->adj.Action == REMOVE_MANAGED_RESOURCE) &&
-//mdk-stage1// 		   (al->adj.Resource == RES_IRQ)) {
-//mdk-stage1// 	    al->adj.Action = ADD_MANAGED_RESOURCE;
-//mdk-stage1// 	    ioctl(fd, DS_ADJUST_RESOURCE_INFO, &al->adj);
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1//     
-//mdk-stage1// }
-
-/*====================================================================*/
-
-static void adjust_resources(void)
-{
-    adjust_list_t *al;
-    int ret;
-    char tmp[64];
-    int fd = socket[0].fd;
-    
-    for (al = root_adjust; al; al = al->next) {
-	ret = ioctl(fd, DS_ADJUST_RESOURCE_INFO, &al->adj);
-	if (ret != 0) {
-	    switch (al->adj.Resource) {
-	    case RES_MEMORY_RANGE:
-		sprintf(tmp, "memory %#lx-%#lx",
-			al->adj.resource.memory.Base,
-			al->adj.resource.memory.Base +
-			al->adj.resource.memory.Size - 1);
-		break;
-	    case RES_IO_RANGE:
-		sprintf(tmp, "IO ports %#x-%#x",
-			al->adj.resource.io.BasePort,
-			al->adj.resource.io.BasePort +
-			al->adj.resource.io.NumPorts - 1);
-		break;
-	    case RES_IRQ:
-		sprintf(tmp, "irq %u", al->adj.resource.irq.IRQ);
-		break;
-	    }
-	    log_message("CM: could not adjust resource: %s: %m", tmp);
-	}
-    }
-}
-    
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static int cleanup_files = 0;
-//mdk-stage1// 
-//mdk-stage1// static void fork_now(void)
-//mdk-stage1// {
-//mdk-stage1//     int ret;
-//mdk-stage1//     if ((ret = fork()) > 0) {
-//mdk-stage1// 	cleanup_files = 0;
-//mdk-stage1// 	exit(0);
-//mdk-stage1//     }
-//mdk-stage1//     if (ret == -1)
-//mdk-stage1// 	syslog(LOG_ERR, "forking: %m");
-//mdk-stage1//     if (setsid() < 0)
-//mdk-stage1// 	syslog(LOG_ERR, "detaching from tty: %m");
-//mdk-stage1// }    
-//mdk-stage1// 
-//mdk-stage1// static void done(void)
-//mdk-stage1// {
-//mdk-stage1//     syslog(LOG_INFO, "exiting");
-//mdk-stage1//     if (cleanup_files) {
-//mdk-stage1// 	unlink(pidfile);
-//mdk-stage1// 	unlink(stabfile);
-//mdk-stage1//     }
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// /* most recent signal */
-//mdk-stage1// static int caught_signal = 0;
-//mdk-stage1// 
-//mdk-stage1// static void catch_signal(int sig)
-//mdk-stage1// {
-//mdk-stage1//     caught_signal = sig;
-//mdk-stage1//     if (signal(sig, catch_signal) == SIG_ERR)
-//mdk-stage1// 	syslog(LOG_INFO, "signal(%d): %m", sig);
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// static void handle_signal(void)
-//mdk-stage1// {
-//mdk-stage1//     int i;
-//mdk-stage1//     switch (caught_signal) {
-//mdk-stage1//     case SIGTERM:
-//mdk-stage1//     case SIGINT:
-//mdk-stage1// 	for (i = 0; i < sockets; i++)
-//mdk-stage1// 	    if ((socket[i].state & SOCKET_PRESENT) &&
-//mdk-stage1// 		(do_check(i) == 0)) do_remove(i);
-//mdk-stage1// 	free_resources();
-//mdk-stage1// 	exit(0);
-//mdk-stage1// 	break;
-//mdk-stage1//     case SIGHUP:
-//mdk-stage1// 	free_resources();
-//mdk-stage1// 	free_config();
-//mdk-stage1// 	syslog(LOG_INFO, "re-loading config file");
-//mdk-stage1// 	load_config();
-//mdk-stage1// 	adjust_resources();
-//mdk-stage1// 	break;
-//mdk-stage1// #ifdef SIGPWR
-//mdk-stage1//     case SIGPWR:
-//mdk-stage1// 	break;
-//mdk-stage1// #endif
-//mdk-stage1//     }
-//mdk-stage1// }
-
-/*====================================================================*/
-
-static int init_sockets(void)
-{
-    int fd, i;
-    servinfo_t serv;
-
-#ifdef __linux__
-    major = lookup_dev("pcmcia");
-    if (major < 0) {
-	if (major == -ENODEV)
-	    log_message("CM: no pcmcia driver in /proc/devices");
-	else
-	    log_message("CM: could not open /proc/devices: %m");
-	return -1;
-    }
-#endif
-    for (fd = -1, i = 0; i < MAX_SOCKS; i++) {
-	fd = open_sock(i, S_IFCHR|S_IREAD|S_IWRITE);
-	if (fd < 0) break;
-	socket[i].fd = fd;
-	socket[i].state = 0;
-    }
-    if ((fd < 0) && (errno != ENODEV) && (errno != ENOENT))
-	log_message("CM: open_sock(socket %d) failed: %m", i);
-    sockets = i;
-    if (sockets == 0) {
-	log_message("CM: no sockets found!");
-	return -1;
-    } else
-	log_message("CM: watching %d sockets", sockets);
-
-    if (ioctl(socket[0].fd, DS_GET_CARD_SERVICES_INFO, &serv) == 0) {
-	if (serv.Revision != CS_RELEASE_CODE)
-	    log_message("CM: warning, Card Services release does not match kernel (generally harmless)");
-    } else {
-	log_message("CM: could not get CS revision info!");
-	return -1;
-    }
-    adjust_resources();
-    return 0;
-}
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// int main(int argc, char *argv[])
-//mdk-stage1// {
-//mdk-stage1//     int optch, errflg;
-//mdk-stage1//     int i, max_fd, ret, event, pass;
-//mdk-stage1//     int delay_fork = 0;
-//mdk-stage1//     struct timeval tv;
-//mdk-stage1//     fd_set fds;
-//mdk-stage1// 
-//mdk-stage1//     if (access("/var/lib/pcmcia", R_OK) == 0) {
-//mdk-stage1// 	stabfile = "/var/lib/pcmcia/stab";
-//mdk-stage1//     } else {
-//mdk-stage1// 	stabfile = "/var/run/stab";
-//mdk-stage1//     }
-//mdk-stage1// 
-//mdk-stage1//     errflg = 0;
-//mdk-stage1//     while ((optch = getopt(argc, argv, "Vqdvofc:m:p:s:")) != -1) {
-//mdk-stage1// 	switch (optch) {
-//mdk-stage1// 	case 'V':
-//mdk-stage1// 	    fprintf(stderr, "cardmgr version " CS_RELEASE "\n");
-//mdk-stage1// 	    return 0;
-//mdk-stage1// 	    break;
-//mdk-stage1// 	case 'q':
-//mdk-stage1// 	    be_quiet = 1; break;
-//mdk-stage1// 	case 'v':
-//mdk-stage1// 	    verbose = 1; break;
-//mdk-stage1// 	case 'o':
-//mdk-stage1// 	    one_pass = 1; break;
-//mdk-stage1// 	case 'f':
-//mdk-stage1// 	    delay_fork = 1; break;
-//mdk-stage1// 	case 'c':
-//mdk-stage1// 	    configpath = strdup(optarg); break;
-//mdk-stage1// #ifdef __linux__
-//mdk-stage1// 	case 'd':
-//mdk-stage1// 	    do_modprobe = 1; break;
-//mdk-stage1// 	case 'm':
-//mdk-stage1// 	    modpath = strdup(optarg); break;
-//mdk-stage1// #endif
-//mdk-stage1// 	case 'p':
-//mdk-stage1// 	    pidfile = strdup(optarg); break;
-//mdk-stage1// 	case 's':
-//mdk-stage1// 	    stabfile = strdup(optarg); break;
-//mdk-stage1// 	default:
-//mdk-stage1// 	    errflg = 1; break;
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1//     if (errflg || (optind < argc)) {
-//mdk-stage1// 	fprintf(stderr, "usage: %s [-V] [-q] [-v] [-d] [-o] [-f] "
-//mdk-stage1// 		"[-c configpath] [-m modpath]\n               "
-//mdk-stage1// 		"[-p pidfile] [-s stabfile]\n", argv[0]);
-//mdk-stage1// 	exit(EXIT_FAILURE);
-//mdk-stage1//     }
-//mdk-stage1// 
-//mdk-stage1// #ifdef DEBUG
-//mdk-stage1//     openlog("cardmgr", LOG_PID|LOG_PERROR, LOG_DAEMON);
-//mdk-stage1// #else
-//mdk-stage1//     openlog("cardmgr", LOG_PID|LOG_CONS, LOG_DAEMON);
-//mdk-stage1//     close(0); close(1); close(2);
-//mdk-stage1//     if (!delay_fork && !one_pass)
-//mdk-stage1// 	fork_now();
-//mdk-stage1// #endif
-//mdk-stage1//     
-//mdk-stage1//     syslog(LOG_INFO, "starting, version is " CS_RELEASE);
-//mdk-stage1//     atexit(&done);
-//mdk-stage1//     putenv("PATH=/bin:/sbin:/usr/bin:/usr/sbin");
-//mdk-stage1//     if (verbose)
-//mdk-stage1// 	putenv("VERBOSE=1");
-//mdk-stage1// 
-//mdk-stage1// #ifdef __linux__
-//mdk-stage1//     if (modpath == NULL) {
-//mdk-stage1// 	if (access("/lib/modules/preferred", X_OK) == 0)
-//mdk-stage1// 	    modpath = "/lib/modules/preferred";
-//mdk-stage1// 	else {
-//mdk-stage1// 	    struct utsname utsname;
-//mdk-stage1// 	    if (uname(&utsname) != 0) {
-//mdk-stage1// 		syslog(LOG_ERR, "uname(): %m");
-//mdk-stage1// 		exit(EXIT_FAILURE);
-//mdk-stage1// 	    }
-//mdk-stage1// 	    modpath = (char *)malloc(strlen(utsname.release)+14);
-//mdk-stage1// 	    sprintf(modpath, "/lib/modules/%s", utsname.release);
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1//     if (access(modpath, X_OK) != 0)
-//mdk-stage1// 	syslog(LOG_INFO, "cannot access %s: %m", modpath);
-//mdk-stage1//     /* We default to using modprobe if it is available */
-//mdk-stage1//     do_modprobe |= (access("/sbin/modprobe", X_OK) == 0);
-//mdk-stage1// #endif /* __linux__ */
-//mdk-stage1//     
-//mdk-stage1//     load_config();
-//mdk-stage1//     
-//mdk-stage1//     if (init_sockets() != 0)
-//mdk-stage1// 	exit(EXIT_FAILURE);
-//mdk-stage1// 
-//mdk-stage1//     /* If we've gotten this far, then clean up pid and stab at exit */
-//mdk-stage1//     write_pid();
-//mdk-stage1//     write_stab();
-//mdk-stage1//     cleanup_files = 1;
-//mdk-stage1//     
-//mdk-stage1//     if (signal(SIGHUP, catch_signal) == SIG_ERR)
-//mdk-stage1// 	syslog(LOG_ERR, "signal(SIGHUP): %m");
-//mdk-stage1//     if (signal(SIGTERM, catch_signal) == SIG_ERR)
-//mdk-stage1// 	syslog(LOG_ERR, "signal(SIGTERM): %m");
-//mdk-stage1//     if (signal(SIGINT, catch_signal) == SIG_ERR)
-//mdk-stage1// 	syslog(LOG_ERR, "signal(SIGINT): %m");
-//mdk-stage1// #ifdef SIGPWR
-//mdk-stage1//     if (signal(SIGPWR, catch_signal) == SIG_ERR)
-//mdk-stage1// 	syslog(LOG_ERR, "signal(SIGPWR): %m");
-//mdk-stage1// #endif
-//mdk-stage1//     
-//mdk-stage1//     for (i = max_fd = 0; i < sockets; i++)
-//mdk-stage1// 	max_fd = (socket[i].fd > max_fd) ? socket[i].fd : max_fd;
-//mdk-stage1// 
-//mdk-stage1//     /* First select() call: poll, don't wait */
-//mdk-stage1//     tv.tv_sec = tv.tv_usec = 0;
-//mdk-stage1// 
-//mdk-stage1//     /* Wait for sockets in setup-pending state to settle */
-//mdk-stage1//     if (one_pass || delay_fork)
-//mdk-stage1// 	wait_for_pending();
-//mdk-stage1//     
-//mdk-stage1//     for (pass = 0; ; pass++) {
-//mdk-stage1// 	FD_ZERO(&fds);
-//mdk-stage1// 	for (i = 0; i < sockets; i++)
-//mdk-stage1// 	    FD_SET(socket[i].fd, &fds);
-//mdk-stage1// 
-//mdk-stage1// 	while ((ret = select(max_fd+1, &fds, NULL, NULL,
-//mdk-stage1// 			     ((pass == 0) ? &tv : NULL))) < 0) {
-//mdk-stage1// 	    if (errno == EINTR) {
-//mdk-stage1// 		handle_signal();
-//mdk-stage1// 	    } else {
-//mdk-stage1// 		syslog(LOG_ERR, "select(): %m");
-//mdk-stage1// 		exit(EXIT_FAILURE);
-//mdk-stage1// 	    }
-//mdk-stage1// 	}
-//mdk-stage1// 
-//mdk-stage1// 	for (i = 0; i < sockets; i++) {
-//mdk-stage1// 	    if (!FD_ISSET(socket[i].fd, &fds))
-//mdk-stage1// 		continue;
-//mdk-stage1// 	    ret = read(socket[i].fd, &event, 4);
-//mdk-stage1// 	    if ((ret == -1) && (errno != EAGAIN))
-//mdk-stage1// 		syslog(LOG_INFO, "read(%d): %m\n", i);
-//mdk-stage1// 	    if (ret != 4)
-//mdk-stage1// 		continue;
-//mdk-stage1// 	    
-//mdk-stage1// 	    switch (event) {
-//mdk-stage1// 	    case CS_EVENT_CARD_REMOVAL:
-//mdk-stage1// 		socket[i].state = 0;
-//mdk-stage1// 		do_remove(i);
-//mdk-stage1// 		break;
-//mdk-stage1// 	    case CS_EVENT_EJECTION_REQUEST:
-//mdk-stage1// 		ret = do_check(i);
-//mdk-stage1// 		if (ret == 0) {
-//mdk-stage1// 		    socket[i].state = 0;
-//mdk-stage1// 		    do_remove(i);
-//mdk-stage1// 		}
-//mdk-stage1// 		write(socket[i].fd, &ret, 4);
-//mdk-stage1// 		break;
-//mdk-stage1// 	    case CS_EVENT_CARD_INSERTION:
-//mdk-stage1// 	    case CS_EVENT_INSERTION_REQUEST:
-//mdk-stage1// 		socket[i].state |= SOCKET_PRESENT;
-//mdk-stage1// 	    case CS_EVENT_CARD_RESET:
-//mdk-stage1// 		socket[i].state |= SOCKET_READY;
-//mdk-stage1// 		do_insert(i);
-//mdk-stage1// 		break;
-//mdk-stage1// 	    case CS_EVENT_RESET_PHYSICAL:
-//mdk-stage1// 		socket[i].state &= ~SOCKET_READY;
-//mdk-stage1// 		break;
-//mdk-stage1// 	    case CS_EVENT_PM_SUSPEND:
-//mdk-stage1// 		do_suspend(i);
-//mdk-stage1// 		break;
-//mdk-stage1// 	    case CS_EVENT_PM_RESUME:
-//mdk-stage1// 		do_resume(i);
-//mdk-stage1// 		break;
-//mdk-stage1// 	    }
-//mdk-stage1// 	    
-//mdk-stage1// 	}
-//mdk-stage1// 
-//mdk-stage1// 	if (one_pass)
-//mdk-stage1// 	    exit(EXIT_SUCCESS);
-//mdk-stage1// 	if (delay_fork) {
-//mdk-stage1// 	    fork_now();
-//mdk-stage1// 	    write_pid();
-//mdk-stage1// 	}
-//mdk-stage1// 	
-//mdk-stage1//     } /* repeat */
-//mdk-stage1//     return 0;
-//mdk-stage1// }
-
-
-
-static void cardmgr_fail(void)
-{
-	log_message("CM: cardmgr: failed");
-}
-
-int cardmgr_call(void)
-{
-	int i, max_fd, ret, event;
-	struct timeval tv;
-	fd_set fds;
-	
-	stabfile = "/var/run/stab";
-	
-	log_message("CM: cardmgr/hacked starting, version is " CS_RELEASE);
-	
-	if (load_config()) {
-		cardmgr_fail();
-		return -1;
-	}
-	
-	if (init_sockets()) {
-		cardmgr_fail();
-		return -1;
-	}
-	
-	/* If we've gotten this far, then clean up pid and stab at exit */
-	write_stab();
-    
-	for (i = max_fd = 0; i < sockets; i++)
-		max_fd = (socket[i].fd > max_fd) ? socket[i].fd : max_fd;
-
-	/* First select() call: poll, don't wait */
-	tv.tv_sec = tv.tv_usec = 0;
-
-	/* Wait for sockets in setup-pending state to settle */
-	wait_for_pending();
-    
-
-	FD_ZERO(&fds);
-	for (i = 0; i < sockets; i++)
-		FD_SET(socket[i].fd, &fds);
-
-	if (select(max_fd+1, &fds, NULL, NULL, &tv) < 0) {
-		log_perror("CM: select fails");
-		return -1;
-	}
-
-	for (i = 0; i < sockets; i++) {
-		if (!FD_ISSET(socket[i].fd, &fds))
-			continue;
-		ret = read(socket[i].fd, &event, 4);
-		if ((ret == -1) && (errno != EAGAIN))
-			log_message("CM: read(%d): %m", i);
-		if (ret != 4)
-			continue;
-	    
-		switch (event) {
-		case CS_EVENT_CARD_INSERTION:
-		case CS_EVENT_INSERTION_REQUEST:
-			socket[i].state |= SOCKET_PRESENT;
-		case CS_EVENT_CARD_RESET:
-			socket[i].state |= SOCKET_READY;
-			do_insert(i);
-			break;
-		case CS_EVENT_RESET_PHYSICAL:
-			socket[i].state &= ~SOCKET_READY;
-			break;
-		}
-	    
-	}
-
-	return 0;
-	
-}
diff --git a/mdk-stage1/pcmcia_/cardmgr.h b/mdk-stage1/pcmcia_/cardmgr.h
deleted file mode 100644
index 1d002e972..000000000
--- a/mdk-stage1/pcmcia_/cardmgr.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * cardmgr.h 1.37 2001/08/24 12:19:20
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#define MAX_SOCKS	8
-#define MAX_BINDINGS	4
-#define MAX_MODULES	4
-
-typedef struct adjust_list_t {
-    adjust_t		adj;
-    struct adjust_list_t *next;
-} adjust_list_t;
-
-typedef struct func_ident_t {
-    u_char		funcid;
-} func_ident_t;
-
-typedef struct manfid_ident_t {
-    u_short		manf;
-    u_short		card;
-} manfid_ident_t;
-
-typedef struct vers_ident_t {
-    int			ns;
-    char		*pi[4];
-} vers_ident_t;
-
-typedef struct tuple_ident_t {
-    cisdata_t		code;
-    long		ofs;
-    char		*info;
-} tuple_ident_t;
-
-typedef struct device_info_t {
-    dev_info_t		dev_info;
-    int			needs_mtd;
-    int			modules;
-    char		*module[MAX_MODULES];
-    char		*opts[MAX_MODULES];
-    char		*class;
-    int			refs;
-    struct device_info_t *next;
-} device_info_t;
-
-#define VERS_1_IDENT	0x0001
-#define MANFID_IDENT	0x0002
-#define TUPLE_IDENT	0x0010
-#define FUNC_IDENT	0x0020
-#define BLANK_IDENT	0x0040
-#define PCI_IDENT	0x0080
-#define EXCL_IDENT	0x00f0
-
-typedef struct card_info_t {
-    char		*name;
-    int			ident_type;
-    union {
-	vers_ident_t	vers;
-	tuple_ident_t	tuple;
-	func_ident_t	func;
-    } id;
-    manfid_ident_t	manfid;
-    int			bindings;
-    device_info_t	*device[MAX_BINDINGS];
-    int			dev_fn[MAX_BINDINGS];
-    char		*cis_file;
-    int			refs;
-    struct card_info_t	*next;
-} card_info_t;
-
-typedef struct mtd_ident_t {
-    char		*name;
-    enum {
-	JEDEC_MTD=1, DTYPE_MTD, DEFAULT_MTD
-    } mtd_type;
-    int			dtype, jedec_mfr, jedec_info;
-    char		*module, *opts;
-    int			refs;
-    struct mtd_ident_t	*next;
-} mtd_ident_t;
-    
-extern adjust_list_t	*root_adjust;
-extern device_info_t	*root_device;
-extern card_info_t	*blank_card;
-extern card_info_t	*root_card, *root_func;
-extern mtd_ident_t	*root_mtd, *default_mtd;
-
-int parse_configfile(char *fn);
diff --git a/mdk-stage1/pcmcia_/cirrus.h b/mdk-stage1/pcmcia_/cirrus.h
deleted file mode 100644
index 49d7fa2de..000000000
--- a/mdk-stage1/pcmcia_/cirrus.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * cirrus.h 1.10 2001/08/24 12:15:33
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_CIRRUS_H
-#define _LINUX_CIRRUS_H
-
-#ifndef PCI_VENDOR_ID_CIRRUS
-#define PCI_VENDOR_ID_CIRRUS		0x1013
-#endif
-#ifndef PCI_DEVICE_ID_CIRRUS_6729
-#define PCI_DEVICE_ID_CIRRUS_6729	0x1100
-#endif
-#ifndef PCI_DEVICE_ID_CIRRUS_6832
-#define PCI_DEVICE_ID_CIRRUS_6832	0x1110
-#endif
-
-#define PD67_MISC_CTL_1		0x16	/* Misc control 1 */
-#define PD67_FIFO_CTL		0x17	/* FIFO control */
-#define PD67_MISC_CTL_2		0x1E	/* Misc control 2 */
-#define PD67_CHIP_INFO		0x1f	/* Chip information */
-#define PD67_ATA_CTL		0x026	/* 6730: ATA control */
-#define PD67_EXT_INDEX		0x2e	/* Extension index */
-#define PD67_EXT_DATA		0x2f	/* Extension data */
-
-#define pd67_ext_get(s, r) \
-    (i365_set(s, PD67_EXT_INDEX, r), i365_get(s, PD67_EXT_DATA))
-#define pd67_ext_set(s, r, v) \
-    (i365_set(s, PD67_EXT_INDEX, r), i365_set(s, PD67_EXT_DATA, v))
-
-/* PD6722 extension registers -- indexed in PD67_EXT_INDEX */
-#define PD67_DATA_MASK0		0x01	/* Data mask 0 */
-#define PD67_DATA_MASK1		0x02	/* Data mask 1 */
-#define PD67_DMA_CTL		0x03	/* DMA control */
-
-/* PD6730 extension registers -- indexed in PD67_EXT_INDEX */
-#define PD67_EXT_CTL_1		0x03	/* Extension control 1 */
-#define PD67_MEM_PAGE(n)	((n)+5)	/* PCI window bits 31:24 */
-#define PD67_EXTERN_DATA	0x0a
-#define PD67_MISC_CTL_3		0x25
-#define PD67_SMB_PWR_CTL	0x26
-
-/* I/O window address offset */
-#define PD67_IO_OFF(w)		(0x36+((w)<<1))
-
-/* Timing register sets */
-#define PD67_TIME_SETUP(n)	(0x3a + 3*(n))
-#define PD67_TIME_CMD(n)	(0x3b + 3*(n))
-#define PD67_TIME_RECOV(n)	(0x3c + 3*(n))
-
-/* Flags for PD67_MISC_CTL_1 */
-#define PD67_MC1_5V_DET		0x01	/* 5v detect */
-#define PD67_MC1_MEDIA_ENA	0x01	/* 6730: Multimedia enable */
-#define PD67_MC1_VCC_3V		0x02	/* 3.3v Vcc */
-#define PD67_MC1_PULSE_MGMT	0x04
-#define PD67_MC1_PULSE_IRQ	0x08
-#define PD67_MC1_SPKR_ENA	0x10
-#define PD67_MC1_INPACK_ENA	0x80
-
-/* Flags for PD67_FIFO_CTL */
-#define PD67_FIFO_EMPTY		0x80
-
-/* Flags for PD67_MISC_CTL_2 */
-#define PD67_MC2_FREQ_BYPASS	0x01
-#define PD67_MC2_DYNAMIC_MODE	0x02
-#define PD67_MC2_SUSPEND	0x04
-#define PD67_MC2_5V_CORE	0x08
-#define PD67_MC2_LED_ENA	0x10	/* IRQ 12 is LED enable */
-#define PD67_MC2_FAST_PCI	0x10	/* 6729: PCI bus > 25 MHz */
-#define PD67_MC2_3STATE_BIT7	0x20	/* Floppy change bit */
-#define PD67_MC2_DMA_MODE	0x40
-#define PD67_MC2_IRQ15_RI	0x80	/* IRQ 15 is ring enable */
-
-/* Flags for PD67_CHIP_INFO */
-#define PD67_INFO_SLOTS		0x20	/* 0 = 1 slot, 1 = 2 slots */
-#define PD67_INFO_CHIP_ID	0xc0
-#define PD67_INFO_REV		0x1c
-
-/* Fields in PD67_TIME_* registers */
-#define PD67_TIME_SCALE		0xc0
-#define PD67_TIME_SCALE_1	0x00
-#define PD67_TIME_SCALE_16	0x40
-#define PD67_TIME_SCALE_256	0x80
-#define PD67_TIME_SCALE_4096	0xc0
-#define PD67_TIME_MULT		0x3f
-
-/* Fields in PD67_DMA_CTL */
-#define PD67_DMA_MODE		0xc0
-#define PD67_DMA_OFF		0x00
-#define PD67_DMA_DREQ_INPACK	0x40
-#define PD67_DMA_DREQ_WP	0x80
-#define PD67_DMA_DREQ_BVD2	0xc0
-#define PD67_DMA_PULLUP		0x20	/* Disable socket pullups? */
-
-/* Fields in PD67_EXT_CTL_1 */
-#define PD67_EC1_VCC_PWR_LOCK	0x01
-#define PD67_EC1_AUTO_PWR_CLEAR	0x02
-#define PD67_EC1_LED_ENA	0x04
-#define PD67_EC1_INV_CARD_IRQ	0x08
-#define PD67_EC1_INV_MGMT_IRQ	0x10
-#define PD67_EC1_PULLUP_CTL	0x20
-
-/* Fields in PD67_EXTERN_DATA */
-#define PD67_EXD_VS1(s)		(0x01 << ((s)<<1))
-#define PD67_EXD_VS2(s)		(0x02 << ((s)<<1))
-
-/* Fields in PD67_MISC_CTL_3 */
-#define PD67_MC3_IRQ_MASK	0x03
-#define PD67_MC3_IRQ_PCPCI	0x00
-#define PD67_MC3_IRQ_EXTERN	0x01
-#define PD67_MC3_IRQ_PCIWAY	0x02
-#define PD67_MC3_IRQ_PCI	0x03
-#define PD67_MC3_PWR_MASK	0x0c
-#define PD67_MC3_PWR_SERIAL	0x00
-#define PD67_MC3_PWR_TI2202	0x08
-#define PD67_MC3_PWR_SMB	0x0c
-
-/* Register definitions for Cirrus PD6832 PCI-to-CardBus bridge */
-
-/* PD6832 extension registers -- indexed in PD67_EXT_INDEX */
-#define PD68_EXT_CTL_2			0x0b
-#define PD68_PCI_SPACE			0x22
-#define PD68_PCCARD_SPACE		0x23
-#define PD68_WINDOW_TYPE		0x24
-#define PD68_EXT_CSC			0x2e
-#define PD68_MISC_CTL_4			0x2f
-#define PD68_MISC_CTL_5			0x30
-#define PD68_MISC_CTL_6			0x31
-
-/* Extra flags in PD67_MISC_CTL_3 */
-#define PD68_MC3_HW_SUSP		0x10
-#define PD68_MC3_MM_EXPAND		0x40
-#define PD68_MC3_MM_ARM			0x80
-
-/* Bridge Control Register */
-#define  PD6832_BCR_MGMT_IRQ_ENA	0x0800
-
-/* Socket Number Register */
-#define PD6832_SOCKET_NUMBER		0x004c	/* 8 bit */
-
-/* Data structure for tracking vendor-specific state */
-typedef struct cirrus_state_t {
-    u_char		misc1;		/* PD67_MISC_CTL_1 */
-    u_char		misc2;		/* PD67_MISC_CTL_2 */
-    u_char		ectl1;		/* PD67_EXT_CTL_1 */
-    u_char		timer[6];	/* PD67_TIME_* */
-} cirrus_state_t;
-
-#define CIRRUS_PCIC_ID \
-    IS_PD6729, IS_PD6730, IS_PD6832
-
-#define CIRRUS_PCIC_INFO \
-    { "Cirrus PD6729", IS_CIRRUS|IS_PCI, ID(CIRRUS, 6729) },		\
-    { "Cirrus PD6730", IS_CIRRUS|IS_PCI, PCI_VENDOR_ID_CIRRUS, -1 },	\
-    { "Cirrus PD6832", IS_CIRRUS|IS_CARDBUS, ID(CIRRUS, 6832) }
-
-#endif /* _LINUX_CIRRUS_H */
diff --git a/mdk-stage1/pcmcia_/cistpl.h b/mdk-stage1/pcmcia_/cistpl.h
deleted file mode 100644
index 1d4cac20e..000000000
--- a/mdk-stage1/pcmcia_/cistpl.h
+++ /dev/null
@@ -1,604 +0,0 @@
-/*
- * cistpl.h 1.35 2001/08/24 12:16:12
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_CISTPL_H
-#define _LINUX_CISTPL_H
-
-#define CISTPL_NULL		0x00
-#define CISTPL_DEVICE		0x01
-#define CISTPL_LONGLINK_CB	0x02
-#define CISTPL_INDIRECT		0x03
-#define CISTPL_CONFIG_CB	0x04
-#define CISTPL_CFTABLE_ENTRY_CB	0x05
-#define CISTPL_LONGLINK_MFC	0x06
-#define CISTPL_BAR		0x07
-#define CISTPL_PWR_MGMNT	0x08
-#define CISTPL_EXTDEVICE	0x09
-#define CISTPL_CHECKSUM		0x10
-#define CISTPL_LONGLINK_A	0x11
-#define CISTPL_LONGLINK_C	0x12
-#define CISTPL_LINKTARGET	0x13
-#define CISTPL_NO_LINK		0x14
-#define CISTPL_VERS_1		0x15
-#define CISTPL_ALTSTR		0x16
-#define CISTPL_DEVICE_A		0x17
-#define CISTPL_JEDEC_C		0x18
-#define CISTPL_JEDEC_A		0x19
-#define CISTPL_CONFIG		0x1a
-#define CISTPL_CFTABLE_ENTRY	0x1b
-#define CISTPL_DEVICE_OC	0x1c
-#define CISTPL_DEVICE_OA	0x1d
-#define CISTPL_DEVICE_GEO	0x1e
-#define CISTPL_DEVICE_GEO_A	0x1f
-#define CISTPL_MANFID		0x20
-#define CISTPL_FUNCID		0x21
-#define CISTPL_FUNCE		0x22
-#define CISTPL_SWIL		0x23
-#define CISTPL_END		0xff
-/* Layer 2 tuples */
-#define CISTPL_VERS_2		0x40
-#define CISTPL_FORMAT		0x41
-#define CISTPL_GEOMETRY		0x42
-#define CISTPL_BYTEORDER	0x43
-#define CISTPL_DATE		0x44
-#define CISTPL_BATTERY		0x45
-#define CISTPL_FORMAT_A		0x47
-/* Layer 3 tuples */
-#define CISTPL_ORG		0x46
-#define CISTPL_SPCL		0x90
-
-typedef struct cistpl_longlink_t {
-    u_int	addr;
-} cistpl_longlink_t;
-
-typedef struct cistpl_checksum_t {
-    u_short	addr;
-    u_short	len;
-    u_char	sum;
-} cistpl_checksum_t;
-
-#define CISTPL_MAX_FUNCTIONS	8
-#define CISTPL_MFC_ATTR		0x00
-#define CISTPL_MFC_COMMON	0x01
-
-typedef struct cistpl_longlink_mfc_t {
-    u_char	nfn;
-    struct {
-	u_char	space;
-	u_int	addr;
-    } fn[CISTPL_MAX_FUNCTIONS];
-} cistpl_longlink_mfc_t;
-
-#define CISTPL_MAX_ALTSTR_STRINGS	4
-
-typedef struct cistpl_altstr_t {
-    u_char	ns;
-    u_char	ofs[CISTPL_MAX_ALTSTR_STRINGS];
-    char	str[254];
-} cistpl_altstr_t;
-
-#define CISTPL_DTYPE_NULL	0x00
-#define CISTPL_DTYPE_ROM	0x01
-#define CISTPL_DTYPE_OTPROM	0x02
-#define CISTPL_DTYPE_EPROM	0x03
-#define CISTPL_DTYPE_EEPROM	0x04
-#define CISTPL_DTYPE_FLASH	0x05
-#define CISTPL_DTYPE_SRAM	0x06
-#define CISTPL_DTYPE_DRAM	0x07
-#define CISTPL_DTYPE_FUNCSPEC	0x0d
-#define CISTPL_DTYPE_EXTEND	0x0e
-
-#define CISTPL_MAX_DEVICES	4
-
-typedef struct cistpl_device_t {
-    u_char	ndev;
-    struct {
-	u_char 	type;
-	u_char	wp;
-	u_int	speed;
-	u_int	size;
-    } dev[CISTPL_MAX_DEVICES];
-} cistpl_device_t;
-
-#define CISTPL_DEVICE_MWAIT	0x01
-#define CISTPL_DEVICE_3VCC	0x02
-
-typedef struct cistpl_device_o_t {
-    u_char		flags;
-    cistpl_device_t	device;
-} cistpl_device_o_t;
-
-#define CISTPL_VERS_1_MAX_PROD_STRINGS	4
-
-typedef struct cistpl_vers_1_t {
-    u_char	major;
-    u_char	minor;
-    u_char	ns;
-    u_char	ofs[CISTPL_VERS_1_MAX_PROD_STRINGS];
-    char	str[254];
-} cistpl_vers_1_t;
-
-typedef struct cistpl_jedec_t {
-    u_char	nid;
-    struct {
-	u_char	mfr;
-	u_char	info;
-    } id[CISTPL_MAX_DEVICES];
-} cistpl_jedec_t;
-
-typedef struct cistpl_manfid_t {
-    u_short	manf;
-    u_short	card;
-} cistpl_manfid_t;
-
-#define CISTPL_FUNCID_MULTI	0x00
-#define CISTPL_FUNCID_MEMORY	0x01
-#define CISTPL_FUNCID_SERIAL	0x02
-#define CISTPL_FUNCID_PARALLEL	0x03
-#define CISTPL_FUNCID_FIXED	0x04
-#define CISTPL_FUNCID_VIDEO	0x05
-#define CISTPL_FUNCID_NETWORK	0x06
-#define CISTPL_FUNCID_AIMS	0x07
-#define CISTPL_FUNCID_SCSI	0x08
-
-#define CISTPL_SYSINIT_POST	0x01
-#define CISTPL_SYSINIT_ROM	0x02
-
-typedef struct cistpl_funcid_t {
-    u_char	func;
-    u_char	sysinit;
-} cistpl_funcid_t;
-
-typedef struct cistpl_funce_t {
-    u_char	type;
-    u_char	data[0];
-} cistpl_funce_t;
-
-/*======================================================================
-
-    Modem Function Extension Tuples
-
-======================================================================*/
-
-#define CISTPL_FUNCE_SERIAL_IF		0x00
-#define CISTPL_FUNCE_SERIAL_CAP		0x01
-#define CISTPL_FUNCE_SERIAL_SERV_DATA	0x02
-#define CISTPL_FUNCE_SERIAL_SERV_FAX	0x03
-#define CISTPL_FUNCE_SERIAL_SERV_VOICE	0x04
-#define CISTPL_FUNCE_SERIAL_CAP_DATA	0x05
-#define CISTPL_FUNCE_SERIAL_CAP_FAX	0x06
-#define CISTPL_FUNCE_SERIAL_CAP_VOICE	0x07
-#define CISTPL_FUNCE_SERIAL_IF_DATA	0x08
-#define CISTPL_FUNCE_SERIAL_IF_FAX	0x09
-#define CISTPL_FUNCE_SERIAL_IF_VOICE	0x0a
-
-/* UART identification */
-#define CISTPL_SERIAL_UART_8250		0x00
-#define CISTPL_SERIAL_UART_16450	0x01
-#define CISTPL_SERIAL_UART_16550	0x02
-#define CISTPL_SERIAL_UART_8251		0x03
-#define CISTPL_SERIAL_UART_8530		0x04
-#define CISTPL_SERIAL_UART_85230	0x05
-
-/* UART capabilities */
-#define CISTPL_SERIAL_UART_SPACE	0x01
-#define CISTPL_SERIAL_UART_MARK		0x02
-#define CISTPL_SERIAL_UART_ODD		0x04
-#define CISTPL_SERIAL_UART_EVEN		0x08
-#define CISTPL_SERIAL_UART_5BIT		0x01
-#define CISTPL_SERIAL_UART_6BIT		0x02
-#define CISTPL_SERIAL_UART_7BIT		0x04
-#define CISTPL_SERIAL_UART_8BIT		0x08
-#define CISTPL_SERIAL_UART_1STOP	0x10
-#define CISTPL_SERIAL_UART_MSTOP	0x20
-#define CISTPL_SERIAL_UART_2STOP	0x40
-
-typedef struct cistpl_serial_t {
-    u_char	uart_type;
-    u_char	uart_cap_0;
-    u_char	uart_cap_1;
-} cistpl_serial_t;
-
-typedef struct cistpl_modem_cap_t {
-    u_char	flow;
-    u_char	cmd_buf;
-    u_char	rcv_buf_0, rcv_buf_1, rcv_buf_2;
-    u_char	xmit_buf_0, xmit_buf_1, xmit_buf_2;
-} cistpl_modem_cap_t;
-
-#define CISTPL_SERIAL_MOD_103		0x01
-#define CISTPL_SERIAL_MOD_V21		0x02
-#define CISTPL_SERIAL_MOD_V23		0x04
-#define CISTPL_SERIAL_MOD_V22		0x08
-#define CISTPL_SERIAL_MOD_212A		0x10
-#define CISTPL_SERIAL_MOD_V22BIS	0x20
-#define CISTPL_SERIAL_MOD_V26		0x40
-#define CISTPL_SERIAL_MOD_V26BIS	0x80
-#define CISTPL_SERIAL_MOD_V27BIS	0x01
-#define CISTPL_SERIAL_MOD_V29		0x02
-#define CISTPL_SERIAL_MOD_V32		0x04
-#define CISTPL_SERIAL_MOD_V32BIS	0x08
-#define CISTPL_SERIAL_MOD_V34		0x10
-
-#define CISTPL_SERIAL_ERR_MNP2_4	0x01
-#define CISTPL_SERIAL_ERR_V42_LAPM	0x02
-
-#define CISTPL_SERIAL_CMPR_V42BIS	0x01
-#define CISTPL_SERIAL_CMPR_MNP5		0x02
-
-#define CISTPL_SERIAL_CMD_AT1		0x01
-#define CISTPL_SERIAL_CMD_AT2		0x02
-#define CISTPL_SERIAL_CMD_AT3		0x04
-#define CISTPL_SERIAL_CMD_MNP_AT	0x08
-#define CISTPL_SERIAL_CMD_V25BIS	0x10
-#define CISTPL_SERIAL_CMD_V25A		0x20
-#define CISTPL_SERIAL_CMD_DMCL		0x40
-
-typedef struct cistpl_data_serv_t {
-    u_char	max_data_0;
-    u_char	max_data_1;
-    u_char	modulation_0;
-    u_char	modulation_1;
-    u_char	error_control;
-    u_char	compression;
-    u_char	cmd_protocol;
-    u_char	escape;
-    u_char	encrypt;
-    u_char	misc_features;
-    u_char	ccitt_code[0];
-} cistpl_data_serv_t;
-
-typedef struct cistpl_fax_serv_t {
-    u_char	max_data_0;
-    u_char	max_data_1;
-    u_char	modulation;
-    u_char	encrypt;
-    u_char	features_0;
-    u_char	features_1;
-    u_char	ccitt_code[0];
-} cistpl_fax_serv_t;
-
-typedef struct cistpl_voice_serv_t {
-    u_char	max_data_0;
-    u_char	max_data_1;
-} cistpl_voice_serv_t;
-
-/*======================================================================
-
-    LAN Function Extension Tuples
-
-======================================================================*/
-
-#define CISTPL_FUNCE_LAN_TECH		0x01
-#define CISTPL_FUNCE_LAN_SPEED		0x02
-#define CISTPL_FUNCE_LAN_MEDIA		0x03
-#define CISTPL_FUNCE_LAN_NODE_ID	0x04
-#define CISTPL_FUNCE_LAN_CONNECTOR	0x05
-
-/* LAN technologies */
-#define CISTPL_LAN_TECH_ARCNET		0x01
-#define CISTPL_LAN_TECH_ETHERNET	0x02
-#define CISTPL_LAN_TECH_TOKENRING	0x03
-#define CISTPL_LAN_TECH_LOCALTALK	0x04
-#define CISTPL_LAN_TECH_FDDI		0x05
-#define CISTPL_LAN_TECH_ATM		0x06
-#define CISTPL_LAN_TECH_WIRELESS	0x07
-
-typedef struct cistpl_lan_tech_t {
-    u_char	tech;
-} cistpl_lan_tech_t;
-
-typedef struct cistpl_lan_speed_t {
-    u_int	speed;
-} cistpl_lan_speed_t;
-
-/* LAN media definitions */
-#define CISTPL_LAN_MEDIA_UTP		0x01
-#define CISTPL_LAN_MEDIA_STP		0x02
-#define CISTPL_LAN_MEDIA_THIN_COAX	0x03
-#define CISTPL_LAN_MEDIA_THICK_COAX	0x04
-#define CISTPL_LAN_MEDIA_FIBER		0x05
-#define CISTPL_LAN_MEDIA_900MHZ		0x06
-#define CISTPL_LAN_MEDIA_2GHZ		0x07
-#define CISTPL_LAN_MEDIA_5GHZ		0x08
-#define CISTPL_LAN_MEDIA_DIFF_IR	0x09
-#define CISTPL_LAN_MEDIA_PTP_IR		0x0a
-
-typedef struct cistpl_lan_media_t {
-    u_char	media;
-} cistpl_lan_media_t;
-
-typedef struct cistpl_lan_node_id_t {
-    u_char	nb;
-    u_char	id[16];
-} cistpl_lan_node_id_t;
-
-typedef struct cistpl_lan_connector_t {
-    u_char	code;
-} cistpl_lan_connector_t;
-
-/*======================================================================
-
-    IDE Function Extension Tuples
-
-======================================================================*/
-
-#define CISTPL_IDE_INTERFACE		0x01
-
-typedef struct cistpl_ide_interface_t {
-    u_char	interface;
-} cistpl_ide_interface_t;
-
-/* First feature byte */
-#define CISTPL_IDE_SILICON		0x04
-#define CISTPL_IDE_UNIQUE		0x08
-#define CISTPL_IDE_DUAL			0x10
-
-/* Second feature byte */
-#define CISTPL_IDE_HAS_SLEEP		0x01
-#define CISTPL_IDE_HAS_STANDBY		0x02
-#define CISTPL_IDE_HAS_IDLE		0x04
-#define CISTPL_IDE_LOW_POWER		0x08
-#define CISTPL_IDE_REG_INHIBIT		0x10
-#define CISTPL_IDE_HAS_INDEX		0x20
-#define CISTPL_IDE_IOIS16		0x40
-
-typedef struct cistpl_ide_feature_t {
-    u_char	feature1;
-    u_char	feature2;
-} cistpl_ide_feature_t;
-
-#define CISTPL_FUNCE_IDE_IFACE		0x01
-#define CISTPL_FUNCE_IDE_MASTER		0x02
-#define CISTPL_FUNCE_IDE_SLAVE		0x03
-
-/*======================================================================
-
-    Configuration Table Entries
-
-======================================================================*/
-
-#define CISTPL_BAR_SPACE	0x07
-#define CISTPL_BAR_SPACE_IO	0x10
-#define CISTPL_BAR_PREFETCH	0x20
-#define CISTPL_BAR_CACHEABLE	0x40
-#define CISTPL_BAR_1MEG_MAP	0x80
-
-typedef struct cistpl_bar_t {
-    u_char	attr;
-    u_int	size;
-} cistpl_bar_t;
-
-typedef struct cistpl_config_t {
-    u_char	last_idx;
-    u_int	base;
-    u_int	rmask[4];
-    u_char	subtuples;
-} cistpl_config_t;
-
-/* These are bits in the 'present' field, and indices in 'param' */
-#define CISTPL_POWER_VNOM	0
-#define CISTPL_POWER_VMIN	1
-#define CISTPL_POWER_VMAX	2
-#define CISTPL_POWER_ISTATIC	3
-#define CISTPL_POWER_IAVG	4
-#define CISTPL_POWER_IPEAK	5
-#define CISTPL_POWER_IDOWN	6
-
-#define CISTPL_POWER_HIGHZ_OK	0x01
-#define CISTPL_POWER_HIGHZ_REQ	0x02
-
-typedef struct cistpl_power_t {
-    u_char	present;
-    u_char	flags;
-    u_int	param[7];
-} cistpl_power_t;
-
-typedef struct cistpl_timing_t {
-    u_int	wait, waitscale;
-    u_int	ready, rdyscale;
-    u_int	reserved, rsvscale;
-} cistpl_timing_t;
-
-#define CISTPL_IO_LINES_MASK	0x1f
-#define CISTPL_IO_8BIT		0x20
-#define CISTPL_IO_16BIT		0x40
-#define CISTPL_IO_RANGE		0x80
-
-#define CISTPL_IO_MAX_WIN	16
-
-typedef struct cistpl_io_t {
-    u_char	flags;
-    u_char	nwin;
-    struct {
-	u_int	base;
-	u_int	len;
-    } win[CISTPL_IO_MAX_WIN];
-} cistpl_io_t;
-
-typedef struct cistpl_irq_t {
-    u_int	IRQInfo1;
-    u_int	IRQInfo2;
-} cistpl_irq_t;
-
-#define CISTPL_MEM_MAX_WIN	8
-
-typedef struct cistpl_mem_t {
-    u_char	flags;
-    u_char	nwin;
-    struct {
-	u_int	len;
-	u_int	card_addr;
-	u_int	host_addr;
-    } win[CISTPL_MEM_MAX_WIN];
-} cistpl_mem_t;
-
-#define CISTPL_CFTABLE_DEFAULT		0x0001
-#define CISTPL_CFTABLE_BVDS		0x0002
-#define CISTPL_CFTABLE_WP		0x0004
-#define CISTPL_CFTABLE_RDYBSY		0x0008
-#define CISTPL_CFTABLE_MWAIT		0x0010
-#define CISTPL_CFTABLE_AUDIO		0x0800
-#define CISTPL_CFTABLE_READONLY		0x1000
-#define CISTPL_CFTABLE_PWRDOWN		0x2000
-
-typedef struct cistpl_cftable_entry_t {
-    u_char		index;
-    u_short		flags;
-    u_char		interface;
-    cistpl_power_t	vcc, vpp1, vpp2;
-    cistpl_timing_t	timing;
-    cistpl_io_t		io;
-    cistpl_irq_t	irq;
-    cistpl_mem_t	mem;
-    u_char		subtuples;
-} cistpl_cftable_entry_t;
-
-#define CISTPL_CFTABLE_MASTER		0x000100
-#define CISTPL_CFTABLE_INVALIDATE	0x000200
-#define CISTPL_CFTABLE_VGA_PALETTE	0x000400
-#define CISTPL_CFTABLE_PARITY		0x000800
-#define CISTPL_CFTABLE_WAIT		0x001000
-#define CISTPL_CFTABLE_SERR		0x002000
-#define CISTPL_CFTABLE_FAST_BACK	0x004000
-#define CISTPL_CFTABLE_BINARY_AUDIO	0x010000
-#define CISTPL_CFTABLE_PWM_AUDIO	0x020000
-
-typedef struct cistpl_cftable_entry_cb_t {
-    u_char		index;
-    u_int		flags;
-    cistpl_power_t	vcc, vpp1, vpp2;
-    u_char		io;
-    cistpl_irq_t	irq;
-    u_char		mem;
-    u_char		subtuples;
-} cistpl_cftable_entry_cb_t;
-
-typedef struct cistpl_device_geo_t {
-    u_char		ngeo;
-    struct {
-	u_char		buswidth;
-	u_int		erase_block;
-	u_int		read_block;
-	u_int		write_block;
-	u_int		partition;
-	u_int		interleave;
-    } geo[CISTPL_MAX_DEVICES];
-} cistpl_device_geo_t;
-
-typedef struct cistpl_vers_2_t {
-    u_char	vers;
-    u_char	comply;
-    u_short	dindex;
-    u_char	vspec8, vspec9;
-    u_char	nhdr;
-    u_char	vendor, info;
-    char	str[244];
-} cistpl_vers_2_t;
-
-typedef struct cistpl_org_t {
-    u_char	data_org;
-    char	desc[30];
-} cistpl_org_t;
-
-#define CISTPL_ORG_FS		0x00
-#define CISTPL_ORG_APPSPEC	0x01
-#define CISTPL_ORG_XIP		0x02
-
-typedef struct cistpl_format_t {
-    u_char	type;
-    u_char	edc;
-    u_int	offset;
-    u_int	length;
-} cistpl_format_t;
-
-#define CISTPL_FORMAT_DISK	0x00
-#define CISTPL_FORMAT_MEM	0x01
-
-#define CISTPL_EDC_NONE		0x00
-#define CISTPL_EDC_CKSUM	0x01
-#define CISTPL_EDC_CRC		0x02
-#define CISTPL_EDC_PCC		0x03
-
-typedef union cisparse_t {
-    cistpl_device_t		device;
-    cistpl_checksum_t		checksum;
-    cistpl_longlink_t		longlink;
-    cistpl_longlink_mfc_t	longlink_mfc;
-    cistpl_vers_1_t		version_1;
-    cistpl_altstr_t		altstr;
-    cistpl_jedec_t		jedec;
-    cistpl_manfid_t		manfid;
-    cistpl_funcid_t		funcid;
-    cistpl_funce_t		funce;
-    cistpl_bar_t		bar;
-    cistpl_config_t		config;
-    cistpl_cftable_entry_t	cftable_entry;
-    cistpl_cftable_entry_cb_t	cftable_entry_cb;
-    cistpl_device_geo_t		device_geo;
-    cistpl_vers_2_t		vers_2;
-    cistpl_org_t		org;
-    cistpl_format_t		format;
-} cisparse_t;
-
-typedef struct tuple_t {
-    u_int	Attributes;
-    cisdata_t 	DesiredTuple;
-    u_int	Flags;		/* internal use */
-    u_int	LinkOffset;	/* internal use */
-    u_int	CISOffset;	/* internal use */
-    cisdata_t	TupleCode;
-    cisdata_t	TupleLink;
-    cisdata_t	TupleOffset;
-    cisdata_t	TupleDataMax;
-    cisdata_t	TupleDataLen;
-    cisdata_t	*TupleData;
-} tuple_t;
-
-/* Special cisdata_t value */
-#define RETURN_FIRST_TUPLE	0xff
-
-/* Attributes for tuple calls */
-#define TUPLE_RETURN_LINK	0x01
-#define TUPLE_RETURN_COMMON	0x02
-
-/* For ValidateCIS */
-typedef struct cisinfo_t {
-    u_int	Chains;
-} cisinfo_t;
-
-#define CISTPL_MAX_CIS_SIZE	0x200
-
-/* For ReplaceCIS */
-typedef struct cisdump_t {
-    u_int	Length;
-    cisdata_t	Data[CISTPL_MAX_CIS_SIZE];
-} cisdump_t;
-
-#endif /* LINUX_CISTPL_H */
diff --git a/mdk-stage1/pcmcia_/cs.h b/mdk-stage1/pcmcia_/cs.h
deleted file mode 100644
index dea6937eb..000000000
--- a/mdk-stage1/pcmcia_/cs.h
+++ /dev/null
@@ -1,465 +0,0 @@
-/*
- * cs.h 1.73 2001/08/24 12:16:12
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_CS_H
-#define _LINUX_CS_H
-
-/* For AccessConfigurationRegister */
-typedef struct conf_reg_t {
-    u_char	Function;
-    u_int	Action;
-    off_t	Offset;
-    u_int	Value;
-} conf_reg_t;
-
-/* Actions */
-#define CS_READ		1
-#define CS_WRITE	2
-
-/* for AdjustResourceInfo */
-typedef struct adjust_t {
-    u_int	Action;
-    u_int	Resource;
-    u_int	Attributes;
-    union {
-	struct memory {
-	    u_long	Base;
-	    u_long	Size;
-	} memory;
-	struct io {
-	    ioaddr_t	BasePort;
-	    ioaddr_t	NumPorts;
-	    u_int	IOAddrLines;
-	} io;
-	struct irq {
-	    u_int	IRQ;
-	} irq;
-    } resource;
-} adjust_t;
-
-/* Action field */
-#define REMOVE_MANAGED_RESOURCE		1
-#define ADD_MANAGED_RESOURCE		2
-#define GET_FIRST_MANAGED_RESOURCE	3
-#define GET_NEXT_MANAGED_RESOURCE	4
-/* Resource field */
-#define RES_MEMORY_RANGE		1
-#define RES_IO_RANGE			2
-#define RES_IRQ				3
-/* Attribute field */
-#define RES_IRQ_TYPE			0x03
-#define RES_IRQ_TYPE_EXCLUSIVE		0
-#define RES_IRQ_TYPE_TIME		1
-#define RES_IRQ_TYPE_DYNAMIC		2
-#define RES_IRQ_CSC			0x04
-#define RES_SHARED			0x08
-#define RES_RESERVED			0x10
-#define RES_ALLOCATED			0x20
-#define RES_REMOVED			0x40
-
-typedef struct servinfo_t {
-    char	Signature[2];
-    u_int	Count;
-    u_int	Revision;
-    u_int	CSLevel;
-    char	*VendorString;
-} servinfo_t;
-
-typedef struct event_callback_args_t {
-    client_handle_t client_handle;
-    void	*info;
-    void	*mtdrequest;
-    void	*buffer;
-    void	*misc;
-    void	*client_data;
-    struct bus_operations *bus;
-} event_callback_args_t;
-
-/* for GetConfigurationInfo */
-typedef struct config_info_t {
-    u_char	Function;
-    u_int	Attributes;
-    u_int	Vcc, Vpp1, Vpp2;
-    u_int	IntType;
-    u_int	ConfigBase;
-    u_char	Status, Pin, Copy, Option, ExtStatus;
-    u_int	Present;
-    u_int	CardValues;
-    u_int	AssignedIRQ;
-    u_int	IRQAttributes;
-    ioaddr_t	BasePort1;
-    ioaddr_t	NumPorts1;
-    u_int	Attributes1;
-    ioaddr_t	BasePort2;
-    ioaddr_t	NumPorts2;
-    u_int	Attributes2;
-    u_int	IOAddrLines;
-} config_info_t;
-
-/* For CardValues field */
-#define CV_OPTION_VALUE		0x01
-#define CV_STATUS_VALUE		0x02
-#define CV_PIN_REPLACEMENT	0x04
-#define CV_COPY_VALUE		0x08
-#define CV_EXT_STATUS		0x10
-
-/* For GetFirst/NextClient */
-typedef struct client_req_t {
-    socket_t	Socket;
-    u_int	Attributes;
-} client_req_t;
-
-#define CLIENT_THIS_SOCKET	0x01
-
-/* For RegisterClient */
-typedef struct client_reg_t {
-    dev_info_t	*dev_info;
-    u_int	Attributes;
-    u_int	EventMask;
-    int		(*event_handler)(event_t event, int priority,
-				 event_callback_args_t *);
-    event_callback_args_t event_callback_args;
-    u_int	Version;
-} client_reg_t;
-
-/* ModifyConfiguration */
-typedef struct modconf_t {
-    u_int	Attributes;
-    u_int	Vcc, Vpp1, Vpp2;
-} modconf_t;
-
-/* Attributes for ModifyConfiguration */
-#define CONF_IRQ_CHANGE_VALID	0x100
-#define CONF_VCC_CHANGE_VALID	0x200
-#define CONF_VPP1_CHANGE_VALID	0x400
-#define CONF_VPP2_CHANGE_VALID	0x800
-
-/* For RequestConfiguration */
-typedef struct config_req_t {
-    u_int	Attributes;
-    u_int	Vcc, Vpp1, Vpp2;
-    u_int	IntType;
-    u_int	ConfigBase;
-    u_char	Status, Pin, Copy, ExtStatus;
-    u_char	ConfigIndex;
-    u_int	Present;
-} config_req_t;
-
-/* Attributes for RequestConfiguration */
-#define CONF_ENABLE_IRQ		0x01
-#define CONF_ENABLE_DMA		0x02
-#define CONF_ENABLE_SPKR	0x04
-#define CONF_VALID_CLIENT	0x100
-
-/* IntType field */
-#define INT_MEMORY		0x01
-#define INT_MEMORY_AND_IO	0x02
-#define INT_CARDBUS		0x04
-#define INT_ZOOMED_VIDEO	0x08
-
-/* For RequestIO and ReleaseIO */
-typedef struct io_req_t {
-    ioaddr_t	BasePort1;
-    ioaddr_t	NumPorts1;
-    u_int	Attributes1;
-    ioaddr_t	BasePort2;
-    ioaddr_t	NumPorts2;
-    u_int	Attributes2;
-    u_int	IOAddrLines;
-} io_req_t;
-
-/* Attributes for RequestIO and ReleaseIO */
-#define IO_SHARED		0x01
-#define IO_FIRST_SHARED		0x02
-#define IO_FORCE_ALIAS_ACCESS	0x04
-#define IO_DATA_PATH_WIDTH	0x18
-#define IO_DATA_PATH_WIDTH_8	0x00
-#define IO_DATA_PATH_WIDTH_16	0x08
-#define IO_DATA_PATH_WIDTH_AUTO	0x10
-
-/* For RequestIRQ and ReleaseIRQ */
-typedef struct irq_req_t {
-    u_int	Attributes;
-    u_int	AssignedIRQ;
-    u_int	IRQInfo1, IRQInfo2;
-    void	*Handler;
-    void	*Instance;
-} irq_req_t;
-
-/* Attributes for RequestIRQ and ReleaseIRQ */
-#define IRQ_TYPE			0x03
-#define IRQ_TYPE_EXCLUSIVE		0x00
-#define IRQ_TYPE_TIME			0x01
-#define IRQ_TYPE_DYNAMIC_SHARING	0x02
-#define IRQ_FORCED_PULSE		0x04
-#define IRQ_FIRST_SHARED		0x08
-#define IRQ_HANDLE_PRESENT		0x10
-#define IRQ_PULSE_ALLOCATED		0x100
-
-/* Bits in IRQInfo1 field */
-#define IRQ_MASK		0x0f
-#define IRQ_NMI_ID		0x01
-#define IRQ_IOCK_ID		0x02
-#define IRQ_BERR_ID		0x04
-#define IRQ_VEND_ID		0x08
-#define IRQ_INFO2_VALID		0x10
-#define IRQ_LEVEL_ID		0x20
-#define IRQ_PULSE_ID		0x40
-#define IRQ_SHARE_ID		0x80
-
-typedef struct eventmask_t {
-    u_int	Attributes;
-    u_int	EventMask;
-} eventmask_t;
-
-#define CONF_EVENT_MASK_VALID	0x01
-
-/* Configuration registers present */
-#define PRESENT_OPTION		0x001
-#define PRESENT_STATUS		0x002
-#define PRESENT_PIN_REPLACE	0x004
-#define PRESENT_COPY		0x008
-#define PRESENT_EXT_STATUS	0x010
-#define PRESENT_IOBASE_0	0x020
-#define PRESENT_IOBASE_1	0x040
-#define PRESENT_IOBASE_2	0x080
-#define PRESENT_IOBASE_3	0x100
-#define PRESENT_IOSIZE		0x200
-
-/* For GetMemPage, MapMemPage */
-typedef struct memreq_t {
-    u_int	CardOffset;
-    page_t	Page;
-} memreq_t;
-
-/* For ModifyWindow */
-typedef struct modwin_t {
-    u_int	Attributes;
-    u_int	AccessSpeed;
-} modwin_t;
-
-/* For RequestWindow */
-typedef struct win_req_t {
-    u_int	Attributes;
-    u_long	Base;
-    u_int	Size;
-    u_int	AccessSpeed;
-} win_req_t;
-
-/* Attributes for RequestWindow */
-#define WIN_ADDR_SPACE		0x0001
-#define WIN_ADDR_SPACE_MEM	0x0000
-#define WIN_ADDR_SPACE_IO	0x0001
-#define WIN_MEMORY_TYPE		0x0002
-#define WIN_MEMORY_TYPE_CM	0x0000
-#define WIN_MEMORY_TYPE_AM	0x0002
-#define WIN_ENABLE		0x0004
-#define WIN_DATA_WIDTH		0x0018
-#define WIN_DATA_WIDTH_8	0x0000
-#define WIN_DATA_WIDTH_16	0x0008
-#define WIN_DATA_WIDTH_32	0x0010
-#define WIN_PAGED		0x0020
-#define WIN_SHARED		0x0040
-#define WIN_FIRST_SHARED	0x0080
-#define WIN_USE_WAIT		0x0100
-#define WIN_STRICT_ALIGN	0x0200
-#define WIN_MAP_BELOW_1MB	0x0400
-#define WIN_PREFETCH		0x0800
-#define WIN_CACHEABLE		0x1000
-#define WIN_BAR_MASK		0xe000
-#define WIN_BAR_SHIFT		13
-
-/* Attributes for RegisterClient */
-#define INFO_MASTER_CLIENT	0x01
-#define INFO_IO_CLIENT		0x02
-#define INFO_MTD_CLIENT		0x04
-#define INFO_MEM_CLIENT		0x08
-#define MAX_NUM_CLIENTS		3
-
-#define INFO_CARD_SHARE		0x10
-#define INFO_CARD_EXCL		0x20
-
-typedef struct cs_status_t {
-    u_char	Function;
-    event_t 	CardState;
-    event_t	SocketState;
-} cs_status_t;
-
-typedef struct error_info_t {
-    int		func;
-    int		retcode;
-} error_info_t;
-
-/* Special stuff for binding drivers to sockets */
-typedef struct bind_req_t {
-    socket_t	Socket;
-    u_char	Function;
-    dev_info_t	*dev_info;
-} bind_req_t;
-
-/* Flag to bind to all functions */
-#define BIND_FN_ALL	0xff
-
-typedef struct mtd_bind_t {
-    socket_t	Socket;
-    u_int	Attributes;
-    u_int	CardOffset;
-    dev_info_t	*dev_info;
-} mtd_bind_t;
-
-/* Events */
-#define CS_EVENT_PRI_LOW		0
-#define CS_EVENT_PRI_HIGH		1
-
-#define CS_EVENT_WRITE_PROTECT		0x000001
-#define CS_EVENT_CARD_LOCK		0x000002
-#define CS_EVENT_CARD_INSERTION		0x000004
-#define CS_EVENT_CARD_REMOVAL		0x000008
-#define CS_EVENT_BATTERY_DEAD		0x000010
-#define CS_EVENT_BATTERY_LOW		0x000020
-#define CS_EVENT_READY_CHANGE		0x000040
-#define CS_EVENT_CARD_DETECT		0x000080
-#define CS_EVENT_RESET_REQUEST		0x000100
-#define CS_EVENT_RESET_PHYSICAL		0x000200
-#define CS_EVENT_CARD_RESET		0x000400
-#define CS_EVENT_REGISTRATION_COMPLETE	0x000800
-#define CS_EVENT_RESET_COMPLETE		0x001000
-#define CS_EVENT_PM_SUSPEND		0x002000
-#define CS_EVENT_PM_RESUME		0x004000
-#define CS_EVENT_INSERTION_REQUEST	0x008000
-#define CS_EVENT_EJECTION_REQUEST	0x010000
-#define CS_EVENT_MTD_REQUEST		0x020000
-#define CS_EVENT_ERASE_COMPLETE		0x040000
-#define CS_EVENT_REQUEST_ATTENTION	0x080000
-#define CS_EVENT_CB_DETECT		0x100000
-#define CS_EVENT_3VCARD			0x200000
-#define CS_EVENT_XVCARD			0x400000
-
-/* Return codes */
-#define CS_SUCCESS		0x00
-#define CS_BAD_ADAPTER		0x01
-#define CS_BAD_ATTRIBUTE	0x02
-#define CS_BAD_BASE		0x03
-#define CS_BAD_EDC		0x04
-#define CS_BAD_IRQ		0x06
-#define CS_BAD_OFFSET		0x07
-#define CS_BAD_PAGE		0x08
-#define CS_READ_FAILURE		0x09
-#define CS_BAD_SIZE		0x0a
-#define CS_BAD_SOCKET		0x0b
-#define CS_BAD_TYPE		0x0d
-#define CS_BAD_VCC		0x0e
-#define CS_BAD_VPP		0x0f
-#define CS_BAD_WINDOW		0x11
-#define CS_WRITE_FAILURE	0x12
-#define CS_NO_CARD		0x14
-#define CS_UNSUPPORTED_FUNCTION	0x15
-#define CS_UNSUPPORTED_MODE	0x16
-#define CS_BAD_SPEED		0x17
-#define CS_BUSY			0x18
-#define CS_GENERAL_FAILURE	0x19
-#define CS_WRITE_PROTECTED	0x1a
-#define CS_BAD_ARG_LENGTH	0x1b
-#define CS_BAD_ARGS		0x1c
-#define CS_CONFIGURATION_LOCKED	0x1d
-#define CS_IN_USE		0x1e
-#define CS_NO_MORE_ITEMS	0x1f
-#define CS_OUT_OF_RESOURCE	0x20
-#define CS_BAD_HANDLE		0x21
-
-#define CS_BAD_TUPLE		0x40
-
-#ifdef __KERNEL__
-
-/*
- *  Calls to set up low-level "Socket Services" drivers
- */
-
-typedef int (*ss_entry_t)(u_int sock, u_int cmd, void *arg);
-extern int register_ss_entry(int nsock, ss_entry_t entry);
-extern void unregister_ss_entry(ss_entry_t entry);
-
-/*
- *  The main Card Services entry point
- */
-
-enum service {
-    AccessConfigurationRegister, AddSocketServices,
-    AdjustResourceInfo, CheckEraseQueue, CloseMemory, CopyMemory,
-    DeregisterClient, DeregisterEraseQueue, GetCardServicesInfo,
-    GetClientInfo, GetConfigurationInfo, GetEventMask,
-    GetFirstClient, GetFirstPartion, GetFirstRegion, GetFirstTuple,
-    GetNextClient, GetNextPartition, GetNextRegion, GetNextTuple,
-    GetStatus, GetTupleData, MapLogSocket, MapLogWindow, MapMemPage,
-    MapPhySocket, MapPhyWindow, ModifyConfiguration, ModifyWindow,
-    OpenMemory, ParseTuple, ReadMemory, RegisterClient,
-    RegisterEraseQueue, RegisterMTD, RegisterTimer,
-    ReleaseConfiguration, ReleaseExclusive, ReleaseIO, ReleaseIRQ,
-    ReleaseSocketMask, ReleaseWindow, ReplaceSocketServices,
-    RequestConfiguration, RequestExclusive, RequestIO, RequestIRQ,
-    RequestSocketMask, RequestWindow, ResetCard, ReturnSSEntry,
-    SetEventMask, SetRegion, ValidateCIS, VendorSpecific,
-    WriteMemory, BindDevice, BindMTD, ReportError,
-    SuspendCard, ResumeCard, EjectCard, InsertCard, ReplaceCIS,
-    GetFirstWindow, GetNextWindow, GetMemPage
-};
-
-#ifdef IN_CARD_SERVICES
-extern int CardServices(int func, void *a1, void *a2, void *a3);
-#else
-extern int CardServices(int func, ...);
-#endif
-
-#ifdef __BEOS__
-#define SS_MODULE_NAME(s)	("busses/pcmcia/" s "/v1")
-#define MTD_MODULE_NAME(s)	("busses/pcmcia/" s "/v1")
-#define CS_CLIENT_MODULE_NAME	"bus_managers/pcmcia_cs/client/v1"
-typedef struct cs_client_module_info {
-    bus_manager_info	binfo;
-    int (*_CardServices)(int, ...);
-    int (*_MTDHelperEntry)(int, ...);
-    void (*_add_timer)(struct timer_list *);
-    void (*_del_timer)(struct timer_list *);
-} cs_client_module_info;
-#define CS_SOCKET_MODULE_NAME "bus_managers/pcmcia_cs/socket/v1"
-typedef struct cs_socket_module_info {
-    bus_manager_info	binfo;
-    int (*_register_ss_entry)(int, ss_entry_t);
-    void (*_unregister_ss_entry)(ss_entry_t);
-    void (*_add_timer)(struct timer_list *);
-    void (*_del_timer)(struct timer_list *);
-    int (*register_resource)(int, u_long, u_long);
-    int (*release_resource)(int, u_long, u_long);
-    int (*check_resource)(int, u_long, u_long);
-} cs_socket_module_info;
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_CS_H */
diff --git a/mdk-stage1/pcmcia_/cs_types.h b/mdk-stage1/pcmcia_/cs_types.h
deleted file mode 100644
index a6b56b6bf..000000000
--- a/mdk-stage1/pcmcia_/cs_types.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * cs_types.h 1.19 2001/08/24 12:16:12
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_CS_TYPES_H
-#define _LINUX_CS_TYPES_H
-
-#ifdef __linux__
-#ifdef __KERNEL__
-#include <linux/types.h>
-#else
-#include <sys/types.h>
-#endif
-#endif
-
-typedef u_short	socket_t;
-typedef u_short	ioaddr_t;
-typedef u_int	event_t;
-typedef u_char	cisdata_t;
-typedef u_short	page_t;
-
-struct client_t;
-typedef struct client_t *client_handle_t;
-
-struct window_t;
-typedef struct window_t *window_handle_t;
-
-struct region_t;
-typedef struct region_t *memory_handle_t;
-
-struct eraseq_t;
-typedef struct eraseq_t *eraseq_handle_t;
-
-#ifndef DEV_NAME_LEN
-#define DEV_NAME_LEN 32
-#endif
-
-typedef char dev_info_t[DEV_NAME_LEN];
-
-#endif /* _LINUX_CS_TYPES_H */
diff --git a/mdk-stage1/pcmcia_/driver_ops.h b/mdk-stage1/pcmcia_/driver_ops.h
deleted file mode 100644
index a7223e2c6..000000000
--- a/mdk-stage1/pcmcia_/driver_ops.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * driver_ops.h 1.16 2001/08/24 12:16:13
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_DRIVER_OPS_H
-#define _LINUX_DRIVER_OPS_H
-
-#ifndef DEV_NAME_LEN
-#define DEV_NAME_LEN	32
-#endif
-
-#ifdef __KERNEL__
-
-typedef struct dev_node_t {
-    char		dev_name[DEV_NAME_LEN];
-    u_short		major, minor;
-    struct dev_node_t	*next;
-} dev_node_t;
-
-typedef struct dev_locator_t {
-    enum { LOC_ISA, LOC_PCI } bus;
-    union {
-	struct {
-	    u_short	io_base_1, io_base_2;
-	    u_long	mem_base;
-	    u_char	irq, dma;
-	} isa;
-	struct {
-	    u_char	bus;
-	    u_char	devfn;
-	} pci;
-    } b;
-} dev_locator_t;
-
-typedef struct driver_operations {
-    char		*name;
-    dev_node_t		*(*attach) (dev_locator_t *loc);
-    void		(*suspend) (dev_node_t *dev);
-    void		(*resume) (dev_node_t *dev);
-    void		(*detach) (dev_node_t *dev);
-} driver_operations;
-
-int register_driver(struct driver_operations *ops);
-void unregister_driver(struct driver_operations *ops);
-
-#ifdef __BEOS__
-#define CB_ENABLER_MODULE_NAME	"bus_managers/cb_enabler/v1"
-typedef struct cb_enabler_module_info {
-    bus_manager_info	binfo;
-    int (*register_driver)(struct driver_operations *ops);
-    void (*unregister_driver)(struct driver_operations *ops);
-} cb_enabler_module_info;
-#endif /* __BEOS__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_DRIVER_OPS_H */
diff --git a/mdk-stage1/pcmcia_/ds.h b/mdk-stage1/pcmcia_/ds.h
deleted file mode 100644
index d191b09d6..000000000
--- a/mdk-stage1/pcmcia_/ds.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * ds.h 1.57 2001/08/24 12:16:13
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_DS_H
-#define _LINUX_DS_H
-
-#include <pcmcia_/driver_ops.h>
-#include <pcmcia_/bulkmem.h>
-
-typedef struct tuple_parse_t {
-    tuple_t		tuple;
-    cisdata_t		data[255];
-    cisparse_t		parse;
-} tuple_parse_t;
-
-typedef struct win_info_t {
-    window_handle_t	handle;
-    win_req_t		window;
-    memreq_t		map;
-} win_info_t;
-    
-typedef struct bind_info_t {
-    dev_info_t		dev_info;
-    u_char		function;
-    struct dev_link_t	*instance;
-    char		name[DEV_NAME_LEN];
-    u_short		major, minor;
-    void		*next;
-} bind_info_t;
-
-typedef struct mtd_info_t {
-    dev_info_t		dev_info;
-    u_int		Attributes;
-    u_int		CardOffset;
-} mtd_info_t;
-
-typedef union ds_ioctl_arg_t {
-    servinfo_t		servinfo;
-    adjust_t		adjust;
-    config_info_t	config;
-    tuple_t		tuple;
-    tuple_parse_t	tuple_parse;
-    client_req_t	client_req;
-    cs_status_t		status;
-    conf_reg_t		conf_reg;
-    cisinfo_t		cisinfo;
-    region_info_t	region;
-    bind_info_t		bind_info;
-    mtd_info_t		mtd_info;
-    win_info_t		win_info;
-    cisdump_t		cisdump;
-} ds_ioctl_arg_t;
-
-#define DS_GET_CARD_SERVICES_INFO	_IOR ('d', 1, servinfo_t)
-#define DS_ADJUST_RESOURCE_INFO		_IOWR('d', 2, adjust_t)
-#define DS_GET_CONFIGURATION_INFO	_IOWR('d', 3, config_info_t)
-#define DS_GET_FIRST_TUPLE		_IOWR('d', 4, tuple_t)
-#define DS_GET_NEXT_TUPLE		_IOWR('d', 5, tuple_t)
-#define DS_GET_TUPLE_DATA		_IOWR('d', 6, tuple_parse_t)
-#define DS_PARSE_TUPLE			_IOWR('d', 7, tuple_parse_t)
-#define DS_RESET_CARD			_IO  ('d', 8)
-#define DS_GET_STATUS			_IOWR('d', 9, cs_status_t)
-#define DS_ACCESS_CONFIGURATION_REGISTER _IOWR('d', 10, conf_reg_t)
-#define DS_VALIDATE_CIS			_IOR ('d', 11, cisinfo_t)
-#define DS_SUSPEND_CARD			_IO  ('d', 12)
-#define DS_RESUME_CARD			_IO  ('d', 13)
-#define DS_EJECT_CARD			_IO  ('d', 14)
-#define DS_INSERT_CARD			_IO  ('d', 15)
-#define DS_GET_FIRST_REGION		_IOWR('d', 16, region_info_t)
-#define DS_GET_NEXT_REGION		_IOWR('d', 17, region_info_t)
-#define DS_REPLACE_CIS			_IOWR('d', 18, cisdump_t)
-#define DS_GET_FIRST_WINDOW		_IOR ('d', 19, win_info_t)
-#define DS_GET_NEXT_WINDOW		_IOWR('d', 20, win_info_t)
-#define DS_GET_MEM_PAGE			_IOWR('d', 21, win_info_t)
-
-#define DS_BIND_REQUEST			_IOWR('d', 60, bind_info_t)
-#define DS_GET_DEVICE_INFO		_IOWR('d', 61, bind_info_t) 
-#define DS_GET_NEXT_DEVICE		_IOWR('d', 62, bind_info_t) 
-#define DS_UNBIND_REQUEST		_IOW ('d', 63, bind_info_t)
-#define DS_BIND_MTD			_IOWR('d', 64, mtd_info_t)
-
-#ifdef __KERNEL__
-
-typedef struct dev_link_t {
-    dev_node_t		*dev;
-    u_int		state, open;
-    wait_queue_head_t	pending;
-    struct timer_list	release;
-    client_handle_t	handle;
-    io_req_t		io;
-    irq_req_t		irq;
-    config_req_t	conf;
-    window_handle_t	win;
-    void		*priv;
-    struct dev_link_t	*next;
-} dev_link_t;
-
-/* Flags for device state */
-#define DEV_PRESENT		0x01
-#define DEV_CONFIG		0x02
-#define DEV_STALE_CONFIG	0x04	/* release on close */
-#define DEV_STALE_LINK		0x08	/* detach on release */
-#define DEV_CONFIG_PENDING	0x10
-#define DEV_RELEASE_PENDING	0x20
-#define DEV_SUSPEND		0x40
-#define DEV_BUSY		0x80
-
-#define DEV_OK(l) \
-    ((l) && ((l->state & ~DEV_BUSY) == (DEV_CONFIG|DEV_PRESENT)))
-
-int register_pccard_driver(dev_info_t *dev_info,
-			   dev_link_t *(*attach)(void),
-			   void (*detach)(dev_link_t *));
-
-int unregister_pccard_driver(dev_info_t *dev_info);
-
-#define register_pcmcia_driver register_pccard_driver
-#define unregister_pcmcia_driver unregister_pccard_driver
-
-#ifdef __BEOS__
-#define DS_MODULE_NAME "bus_managers/pcmcia_ds/v1"
-typedef struct ds_module_info {
-    bus_manager_info binfo;
-    int (*_register_pccard_driver)(dev_info_t *,
-				   dev_link_t *(*)(void),
-				   void (*)(dev_link_t *));
-    int (*_unregister_pccard_driver)(dev_info_t *);
-    struct driver_info_t **root_driver;
-    int *sockets;
-    struct socket_info_t **socket_table;
-    sem_id *list_sem;
-} ds_module_info;
-#endif /* __BEOS__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_DS_H */
diff --git a/mdk-stage1/pcmcia_/i82365.h b/mdk-stage1/pcmcia_/i82365.h
deleted file mode 100644
index 27ee5837c..000000000
--- a/mdk-stage1/pcmcia_/i82365.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * i82365.h 1.21 2001/08/24 12:15:33
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_I82365_H
-#define _LINUX_I82365_H
-
-/* register definitions for the Intel 82365SL PCMCIA controller */
-
-/* Offsets for PCIC registers */
-#define I365_IDENT	0x00	/* Identification and revision */
-#define I365_STATUS	0x01	/* Interface status */
-#define I365_POWER	0x02	/* Power and RESETDRV control */
-#define I365_INTCTL	0x03	/* Interrupt and general control */
-#define I365_CSC	0x04	/* Card status change */
-#define I365_CSCINT	0x05	/* Card status change interrupt control */
-#define I365_ADDRWIN	0x06	/* Address window enable */
-#define I365_IOCTL	0x07	/* I/O control */
-#define I365_GENCTL	0x16	/* Card detect and general control */
-#define I365_GBLCTL	0x1E	/* Global control register */
-
-/* Offsets for I/O and memory window registers */
-#define I365_IO(map)	(0x08+((map)<<2))
-#define I365_MEM(map)	(0x10+((map)<<3))
-#define I365_W_START	0
-#define I365_W_STOP	2
-#define I365_W_OFF	4
-
-/* Flags for I365_STATUS */
-#define I365_CS_BVD1	0x01
-#define I365_CS_STSCHG	0x01
-#define I365_CS_BVD2	0x02
-#define I365_CS_SPKR	0x02
-#define I365_CS_DETECT	0x0C
-#define I365_CS_WRPROT	0x10
-#define I365_CS_READY	0x20	/* Inverted */
-#define I365_CS_POWERON	0x40
-#define I365_CS_GPI	0x80
-
-/* Flags for I365_POWER */
-#define I365_PWR_OFF	0x00	/* Turn off the socket */
-#define I365_PWR_OUT	0x80	/* Output enable */
-#define I365_PWR_NORESET 0x40	/* Disable RESETDRV on resume */
-#define I365_PWR_AUTO	0x20	/* Auto pwr switch enable */
-#define I365_VCC_MASK	0x18	/* Mask for turning off Vcc */
-/* There are different layouts for B-step and DF-step chips: the B
-   step has independent Vpp1/Vpp2 control, and the DF step has only
-   Vpp1 control, plus 3V control */
-#define I365_VCC_5V	0x10	/* Vcc = 5.0v */
-#define I365_VCC_3V	0x18	/* Vcc = 3.3v */
-#define I365_VPP2_MASK	0x0c	/* Mask for turning off Vpp2 */
-#define I365_VPP2_5V	0x04	/* Vpp2 = 5.0v */
-#define I365_VPP2_12V	0x08	/* Vpp2 = 12.0v */
-#define I365_VPP1_MASK	0x03	/* Mask for turning off Vpp1 */
-#define I365_VPP1_5V	0x01	/* Vpp2 = 5.0v */
-#define I365_VPP1_12V	0x02	/* Vpp2 = 12.0v */
-
-/* Flags for I365_INTCTL */
-#define I365_RING_ENA	0x80
-#define I365_PC_RESET	0x40
-#define I365_PC_IOCARD	0x20
-#define I365_INTR_ENA	0x10
-#define I365_IRQ_MASK	0x0F
-
-/* Flags for I365_CSC and I365_CSCINT*/
-#define I365_CSC_BVD1	0x01
-#define I365_CSC_STSCHG	0x01
-#define I365_CSC_BVD2	0x02
-#define I365_CSC_READY	0x04
-#define I365_CSC_DETECT	0x08
-#define I365_CSC_ANY	0x0F
-#define I365_CSC_GPI	0x10
-
-/* Flags for I365_ADDRWIN */
-#define I365_ADDR_MEMCS16	0x20
-#define I365_ENA_IO(map)	(0x40 << (map))
-#define I365_ENA_MEM(map)	(0x01 << (map))
-
-/* Flags for I365_IOCTL */
-#define I365_IOCTL_MASK(map)	(0x0F << (map<<2))
-#define I365_IOCTL_WAIT(map)	(0x08 << (map<<2))
-#define I365_IOCTL_0WS(map)	(0x04 << (map<<2))
-#define I365_IOCTL_IOCS16(map)	(0x02 << (map<<2))
-#define I365_IOCTL_16BIT(map)	(0x01 << (map<<2))
-
-/* Flags for I365_GENCTL */
-#define I365_CTL_16DELAY	0x01
-#define I365_CTL_RESET		0x02
-#define I365_CTL_GPI_ENA	0x04
-#define I365_CTL_GPI_CTL	0x08
-#define I365_CTL_RESUME		0x10
-#define I365_CTL_SW_IRQ		0x20
-
-/* Flags for I365_GBLCTL */
-#define I365_GBL_PWRDOWN	0x01
-#define I365_GBL_CSC_LEV	0x02
-#define I365_GBL_WRBACK		0x04
-#define I365_GBL_IRQ_0_LEV	0x08
-#define I365_GBL_IRQ_1_LEV	0x10
-
-/* Flags for memory window registers */
-#define I365_MEM_16BIT	0x8000	/* In memory start high byte */
-#define I365_MEM_0WS	0x4000
-#define I365_MEM_WS1	0x8000	/* In memory stop high byte */
-#define I365_MEM_WS0	0x4000
-#define I365_MEM_WRPROT	0x8000	/* In offset high byte */
-#define I365_MEM_REG	0x4000
-
-#define I365_REG(slot, reg)	(((slot) << 6) | (reg))
-
-/* Default ISA interrupt mask */
-#define I365_ISA_IRQ_MASK	0xdeb8	/* irq's 3-5,7,9-12,14,15 */
-
-/* Device ID's for PCI-to-PCMCIA bridges */
-
-#ifndef PCI_VENDOR_ID_INTEL
-#define PCI_VENDOR_ID_INTEL		0x8086
-#endif
-#ifndef PCI_DEVICE_ID_INTEL_82092AA_0
-#define PCI_DEVICE_ID_INTEL_82092AA_0	0x1221
-#endif
-#ifndef PCI_VENDOR_ID_OMEGA
-#define PCI_VENDOR_ID_OMEGA		0x119b
-#endif
-#ifndef PCI_DEVICE_ID_OMEGA_82C092G
-#define PCI_DEVICE_ID_OMEGA_82C092G	0x1221
-#endif
-
-#endif /* _LINUX_I82365_H */
diff --git a/mdk-stage1/pcmcia_/lex_config.c b/mdk-stage1/pcmcia_/lex_config.c
deleted file mode 100644
index 2f990618d..000000000
--- a/mdk-stage1/pcmcia_/lex_config.c
+++ /dev/null
@@ -1,2053 +0,0 @@
-/* A lexical scanner generated by flex */
-
-/* Scanner skeleton version:
- * $Header$
- */
-
-#define FLEX_SCANNER
-#define YY_FLEX_MAJOR_VERSION 2
-#define YY_FLEX_MINOR_VERSION 5
-
-#include <stdio.h>
-
-
-/* cfront 1.2 defines "c_plusplus" instead of "__cplusplus" */
-#ifdef c_plusplus
-#ifndef __cplusplus
-#define __cplusplus
-#endif
-#endif
-
-
-#ifdef __cplusplus
-
-#include <stdlib.h>
-#include <unistd.h>
-
-/* Use prototypes in function declarations. */
-#define YY_USE_PROTOS
-
-/* The "const" storage-class-modifier is valid. */
-#define YY_USE_CONST
-
-#else	/* ! __cplusplus */
-
-#if __STDC__
-
-#define YY_USE_PROTOS
-#define YY_USE_CONST
-
-#endif	/* __STDC__ */
-#endif	/* ! __cplusplus */
-
-#ifdef __TURBOC__
- #pragma warn -rch
- #pragma warn -use
-#include <io.h>
-#include <stdlib.h>
-#define YY_USE_CONST
-#define YY_USE_PROTOS
-#endif
-
-#ifdef YY_USE_CONST
-#define yyconst const
-#else
-#define yyconst
-#endif
-
-
-#ifdef YY_USE_PROTOS
-#define YY_PROTO(proto) proto
-#else
-#define YY_PROTO(proto) ()
-#endif
-
-/* Returned upon end-of-file. */
-#define YY_NULL 0
-
-/* Promotes a possibly negative, possibly signed char to an unsigned
- * integer for use as an array index.  If the signed char is negative,
- * we want to instead treat it as an 8-bit unsigned char, hence the
- * double cast.
- */
-#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
-
-/* Enter a start condition.  This macro really ought to take a parameter,
- * but we do it the disgusting crufty way forced on us by the ()-less
- * definition of BEGIN.
- */
-#define BEGIN yy_start = 1 + 2 *
-
-/* Translate the current start state into a value that can be later handed
- * to BEGIN to return to the state.  The YYSTATE alias is for lex
- * compatibility.
- */
-#define YY_START ((yy_start - 1) / 2)
-#define YYSTATE YY_START
-
-/* Action number for EOF rule of a given start state. */
-#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
-
-/* Special action meaning "start processing a new file". */
-#define YY_NEW_FILE yyrestart( yyin )
-
-#define YY_END_OF_BUFFER_CHAR 0
-
-/* Size of default input buffer. */
-#define YY_BUF_SIZE 16384
-
-typedef struct yy_buffer_state *YY_BUFFER_STATE;
-
-extern int yyleng;
-extern FILE *yyin, *yyout;
-
-#define EOB_ACT_CONTINUE_SCAN 0
-#define EOB_ACT_END_OF_FILE 1
-#define EOB_ACT_LAST_MATCH 2
-
-/* The funky do-while in the following #define is used to turn the definition
- * int a single C statement (which needs a semi-colon terminator).  This
- * avoids problems with code like:
- *
- * 	if ( condition_holds )
- *		yyless( 5 );
- *	else
- *		do_something_else();
- *
- * Prior to using the do-while the compiler would get upset at the
- * "else" because it interpreted the "if" statement as being all
- * done when it reached the ';' after the yyless() call.
- */
-
-/* Return all but the first 'n' matched characters back to the input stream. */
-
-#define yyless(n) \
-	do \
-		{ \
-		/* Undo effects of setting up yytext. */ \
-		*yy_cp = yy_hold_char; \
-		YY_RESTORE_YY_MORE_OFFSET \
-		yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \
-		YY_DO_BEFORE_ACTION; /* set up yytext again */ \
-		} \
-	while ( 0 )
-
-//mdk-stage1// #define unput(c) yyunput( c, yytext_ptr )
-
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- */
-typedef unsigned int yy_size_t;
-
-
-struct yy_buffer_state
-	{
-	FILE *yy_input_file;
-
-	char *yy_ch_buf;		/* input buffer */
-	char *yy_buf_pos;		/* current position in input buffer */
-
-	/* Size of input buffer in bytes, not including room for EOB
-	 * characters.
-	 */
-	yy_size_t yy_buf_size;
-
-	/* Number of characters read into yy_ch_buf, not including EOB
-	 * characters.
-	 */
-	int yy_n_chars;
-
-	/* Whether we "own" the buffer - i.e., we know we created it,
-	 * and can realloc() it to grow it, and should free() it to
-	 * delete it.
-	 */
-	int yy_is_our_buffer;
-
-	/* Whether this is an "interactive" input source; if so, and
-	 * if we're using stdio for input, then we want to use getc()
-	 * instead of fread(), to make sure we stop fetching input after
-	 * each newline.
-	 */
-	int yy_is_interactive;
-
-	/* Whether we're considered to be at the beginning of a line.
-	 * If so, '^' rules will be active on the next match, otherwise
-	 * not.
-	 */
-	int yy_at_bol;
-
-	/* Whether to try to fill the input buffer when we reach the
-	 * end of it.
-	 */
-	int yy_fill_buffer;
-
-	int yy_buffer_status;
-#define YY_BUFFER_NEW 0
-#define YY_BUFFER_NORMAL 1
-	/* When an EOF's been seen but there's still some text to process
-	 * then we mark the buffer as YY_EOF_PENDING, to indicate that we
-	 * shouldn't try reading from the input source any more.  We might
-	 * still have a bunch of tokens to match, though, because of
-	 * possible backing-up.
-	 *
-	 * When we actually see the EOF, we change the status to "new"
-	 * (via yyrestart()), so that the user can continue scanning by
-	 * just pointing yyin at a new input file.
-	 */
-#define YY_BUFFER_EOF_PENDING 2
-	};
-
-static YY_BUFFER_STATE yy_current_buffer = 0;
-
-/* We provide macros for accessing buffer states in case in the
- * future we want to put the buffer states in a more general
- * "scanner state".
- */
-#define YY_CURRENT_BUFFER yy_current_buffer
-
-
-/* yy_hold_char holds the character lost when yytext is formed. */
-static char yy_hold_char;
-
-static int yy_n_chars;		/* number of characters read into yy_ch_buf */
-
-
-int yyleng;
-
-/* Points to current character in buffer. */
-static char *yy_c_buf_p = (char *) 0;
-static int yy_init = 1;		/* whether we need to initialize */
-static int yy_start = 0;	/* start state number */
-
-/* Flag which is used to allow yywrap()'s to do buffer switches
- * instead of setting up a fresh yyin.  A bit of a hack ...
- */
-static int yy_did_buffer_switch_on_eof;
-
-void yyrestart YY_PROTO(( FILE *input_file ));
-
-void yy_switch_to_buffer YY_PROTO(( YY_BUFFER_STATE new_buffer ));
-void yy_load_buffer_state YY_PROTO(( void ));
-YY_BUFFER_STATE yy_create_buffer YY_PROTO(( FILE *file, int size ));
-void yy_delete_buffer YY_PROTO(( YY_BUFFER_STATE b ));
-void yy_init_buffer YY_PROTO(( YY_BUFFER_STATE b, FILE *file ));
-void yy_flush_buffer YY_PROTO(( YY_BUFFER_STATE b ));
-#define YY_FLUSH_BUFFER yy_flush_buffer( yy_current_buffer )
-
-YY_BUFFER_STATE yy_scan_buffer YY_PROTO(( char *base, yy_size_t size ));
-YY_BUFFER_STATE yy_scan_string YY_PROTO(( yyconst char *yy_str ));
-YY_BUFFER_STATE yy_scan_bytes YY_PROTO(( yyconst char *bytes, int len ));
-
-static void *yy_flex_alloc YY_PROTO(( yy_size_t ));
-static void *yy_flex_realloc YY_PROTO(( void *, yy_size_t ));
-static void yy_flex_free YY_PROTO(( void * ));
-
-#define yy_new_buffer yy_create_buffer
-
-#define yy_set_interactive(is_interactive) \
-	{ \
-	if ( ! yy_current_buffer ) \
-		yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
-	yy_current_buffer->yy_is_interactive = is_interactive; \
-	}
-
-#define yy_set_bol(at_bol) \
-	{ \
-	if ( ! yy_current_buffer ) \
-		yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
-	yy_current_buffer->yy_at_bol = at_bol; \
-	}
-
-#define YY_AT_BOL() (yy_current_buffer->yy_at_bol)
-
-typedef unsigned char YY_CHAR;
-FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
-typedef int yy_state_type;
-extern char *yytext;
-#define yytext_ptr yytext
-
-static yy_state_type yy_get_previous_state YY_PROTO(( void ));
-static yy_state_type yy_try_NUL_trans YY_PROTO(( yy_state_type current_state ));
-static int yy_get_next_buffer YY_PROTO(( void ));
-static void yy_fatal_error YY_PROTO(( yyconst char msg[] ));
-
-/* Done after the current pattern has been matched and before the
- * corresponding action - sets up yytext.
- */
-#define YY_DO_BEFORE_ACTION \
-	yytext_ptr = yy_bp; \
-	yyleng = (int) (yy_cp - yy_bp); \
-	yy_hold_char = *yy_cp; \
-	*yy_cp = '\0'; \
-	yy_c_buf_p = yy_cp;
-
-#define YY_NUM_RULES 45
-#define YY_END_OF_BUFFER 46
-static yyconst short int yy_accept[247] =
-    {   0,
-        5,    5,    2,    2,   46,   44,    5,    4,    5,   44,
-        6,   41,   41,   44,   44,   44,   44,   44,   44,   44,
-       44,   44,   44,   44,   44,   44,   44,   44,   44,    3,
-        2,   45,    5,    5,    6,    0,   43,    0,    6,   41,
-        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,   30,    0,
-        0,    0,    3,    2,    0,   43,    0,   42,    0,    0,
-        0,    0,    9,    0,    0,    0,    0,    0,    0,    0,
-        0,   18,    0,    0,    0,    0,   23,    0,    0,    0,
-
-        0,   26,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,    8,   10,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,    0,   25,
-        0,   27,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,   11,    0,    0,   14,    0,    0,    0,    0,
-       19,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,   31,    0,    0,    0,    0,    0,   13,    0,
-        0,    0,    0,   20,   21,   22,    0,    0,    0,   28,
-        0,    0,    0,    1,    0,    0,    0,    0,   12,   15,
-        0,    0,   17,    0,    0,    0,    0,   29,    0,    0,
-
-       32,    0,    0,    0,    0,   16,    0,    0,    0,    0,
-        0,    0,    0,   39,    7,    0,    0,   24,    0,    0,
-        0,    0,    0,   36,    0,    0,    0,    0,    0,    0,
-       33,    0,    0,    0,   34,    0,    0,    0,   40,    0,
-        0,   35,   37,    0,   38,    0
-    } ;
-
-static yyconst int yy_ec[256] =
-    {   0,
-        1,    1,    1,    1,    1,    1,    1,    1,    2,    3,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    4,    1,    5,    6,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    7,    8,    8,
-        8,    8,    8,    8,    8,    8,    8,    1,    6,    1,
-        1,    1,    1,    1,    9,    9,    9,    9,    9,    9,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,   10,    1,    1,   11,    1,   12,   13,   14,   15,
-
-       16,   17,   18,    1,   19,   20,   21,   22,   23,   24,
-       25,   26,   27,   28,   29,   30,   31,   32,   33,   34,
-       35,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1
-    } ;
-
-static yyconst int yy_meta[36] =
-    {   0,
-        1,    2,    3,    2,    1,    1,    4,    4,    4,    1,
-        1,    4,    4,    4,    4,    4,    4,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1
-    } ;
-
-static yyconst short int yy_base[253] =
-    {   0,
-        0,    0,   34,   37,  293,  294,   40,  294,   41,   41,
-        0,   41,   45,   31,  273,   42,   40,  257,   38,   34,
-      274,   47,  273,  262,   53,  271,   57,   35,   60,    0,
-       79,  294,   82,   83,    0,   83,  294,   87,    0,   87,
-        0,  263,  260,  260,  255,  253,  269,   74,  245,  265,
-      244,  253,  262,  248,  259,  249,  249,  256,  255,   80,
-      239,  240,  248,  238,   80,  236,  236,  232,  294,  236,
-      233,  245,    0,   97,   95,   97,  108,    0,  230,  234,
-      242,  241,  294,  226,  242,  234,  226,  229,  234,  235,
-      226,  294,  231,  229,  220,  213,  294,  228,  209,  212,
-
-      228,  294,  209,  219,  221,  217,  216,  206,  211,  203,
-      215,  219,  194,  294,  294,  199,  196,  212,  209,  193,
-      208,  192,  190,  206,  200,  190,  195,  187,  190,  294,
-      192,  294,  188,  184,  200,  198,  195,  192,  188,  181,
-      191,  181,  294,  181,  186,  294,  186,  189,  180,  183,
-      294,  182,  161,  179,  183,  165,  170,  167,  158,  177,
-      166,  171,  294,  161,  174,  172,  158,  152,  294,  165,
-      165,  154,  162,  294,  166,  294,  153,  154,  158,  294,
-      157,  157,  160,  294,  146,  157,  140,  136,  294,  294,
-      147,  141,  294,  150,  133,  151,  139,  294,  148,  133,
-
-      294,  143,  142,  127,  126,  294,  142,  138,  140,  140,
-      124,  124,  136,  294,  294,  126,  118,  294,  130,  118,
-      113,  114,  115,  294,  125,  127,  108,  116,   99,   87,
-      294,   90,   87,   86,  294,   96,   78,   74,  294,   75,
-       64,  294,  294,   46,  294,  294,  118,  122,  126,  130,
-      134,   64
-    } ;
-
-static yyconst short int yy_def[253] =
-    {   0,
-      246,    1,  247,  247,  246,  246,  246,  246,  246,  248,
-      249,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  250,
-      246,  246,  246,  246,  249,  248,  246,  251,  249,  246,
-      252,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  250,  246,  248,  248,  251,  252,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,    0,  246,  246,  246,  246,
-      246,  246
-    } ;
-
-static yyconst short int yy_nxt[330] =
-    {   0,
-        6,    7,    8,    9,   10,   11,   12,   13,    6,    6,
-        6,   14,   15,   16,   17,   18,   19,    6,   20,   21,
-        6,    6,   22,   23,   24,   25,    6,   26,   27,   28,
-        6,   29,    6,    6,    6,   31,   32,   31,   31,   32,
-       31,   33,   33,   33,   34,   37,   35,   40,   40,   42,
-       38,   40,   40,   45,   43,   48,   51,   53,   56,   69,
-       46,   54,   57,   47,   62,   70,   63,   78,   52,   49,
-       66,   58,   67,  245,   41,   71,   59,   64,   72,  244,
-       74,   68,   74,   33,   33,   33,   34,   37,   35,   36,
-       85,   76,   38,   40,   40,   98,   77,  104,   74,   37,
-
-       74,   37,  243,  242,   38,   86,   38,  241,  105,   99,
-       36,  240,   76,  239,  238,  237,  236,   77,   30,   30,
-       30,   30,   36,   36,   36,   36,   39,   39,  235,   39,
-       73,  234,  233,   73,   75,   75,   75,   75,  232,  231,
-      230,  229,  228,  227,  226,  225,  224,  223,  222,  221,
-      220,  219,  218,  217,  216,  215,  214,  213,  212,  211,
-      210,  209,  208,  207,  206,  205,  204,  203,  202,  201,
-      200,  199,  198,  197,  196,  195,  194,  193,  192,  191,
-      190,  189,  188,  187,  186,  185,  184,  183,  182,  181,
-      180,  179,  178,  177,  176,  175,  174,  173,  172,  171,
-
-      170,  169,  168,  167,  166,  165,  164,  163,  162,  161,
-      160,  159,  158,  157,  156,  155,  154,  153,  152,  151,
-      150,  149,  148,  147,  146,  145,  144,  143,  142,  141,
-      140,  139,  138,  137,  136,  135,  134,  133,  132,  131,
-      130,  129,  128,  127,  126,  125,  124,  123,  122,  121,
-      120,  119,  118,  117,  116,  115,  114,  113,  112,  111,
-      110,  109,  108,  107,  106,  103,  102,  101,  100,   97,
-       96,   95,   94,   93,   92,   91,   90,   89,   88,   87,
-       84,   83,   82,   81,   80,   79,   65,   61,   60,   55,
-       50,   44,  246,    5,  246,  246,  246,  246,  246,  246,
-
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246
-    } ;
-
-static yyconst short int yy_chk[330] =
-    {   0,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    3,    3,    3,    4,    4,
-        4,    7,    9,    7,    9,   10,    9,   12,   12,   14,
-       10,   13,   13,   16,   14,   17,   19,   20,   22,   28,
-       16,   20,   22,   16,   25,   28,   25,  252,   19,   17,
-       27,   22,   27,  244,   12,   29,   22,   25,   29,  241,
-       31,   27,   31,   33,   34,   33,   34,   36,   34,   38,
-       48,   38,   36,   40,   40,   60,   38,   65,   74,   75,
-
-       74,   76,  240,  238,   75,   48,   76,  237,   65,   60,
-       77,  236,   77,  234,  233,  232,  230,   77,  247,  247,
-      247,  247,  248,  248,  248,  248,  249,  249,  229,  249,
-      250,  228,  227,  250,  251,  251,  251,  251,  226,  225,
-      223,  222,  221,  220,  219,  217,  216,  213,  212,  211,
-      210,  209,  208,  207,  205,  204,  203,  202,  200,  199,
-      197,  196,  195,  194,  192,  191,  188,  187,  186,  185,
-      183,  182,  181,  179,  178,  177,  175,  173,  172,  171,
-      170,  168,  167,  166,  165,  164,  162,  161,  160,  159,
-      158,  157,  156,  155,  154,  153,  152,  150,  149,  148,
-
-      147,  145,  144,  142,  141,  140,  139,  138,  137,  136,
-      135,  134,  133,  131,  129,  128,  127,  126,  125,  124,
-      123,  122,  121,  120,  119,  118,  117,  116,  113,  112,
-      111,  110,  109,  108,  107,  106,  105,  104,  103,  101,
-      100,   99,   98,   96,   95,   94,   93,   91,   90,   89,
-       88,   87,   86,   85,   84,   82,   81,   80,   79,   72,
-       71,   70,   68,   67,   66,   64,   63,   62,   61,   59,
-       58,   57,   56,   55,   54,   53,   52,   51,   50,   49,
-       47,   46,   45,   44,   43,   42,   26,   24,   23,   21,
-       18,   15,    5,  246,  246,  246,  246,  246,  246,  246,
-
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246
-    } ;
-
-static yy_state_type yy_last_accepting_state;
-static char *yy_last_accepting_cpos;
-
-/* The intent behind this definition is that it'll catch
- * any uses of REJECT which flex missed.
- */
-#define REJECT reject_used_but_not_detected
-#define yymore() yymore_used_but_not_detected
-#define YY_MORE_ADJ 0
-#define YY_RESTORE_YY_MORE_OFFSET
-char *yytext;
-#line 1 "lex_config.l"
-#define INITIAL 0
-/* Special state for handling include files */
-#define src 1
-
-#line 5 "lex_config.l"
-/*
- * lex_config.l 1.40 2001/08/24 12:21:25
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#undef src
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <syslog.h>
-#include <glob.h>
-#define src 1
-
-#include <pcmcia_/cs_types.h>
-#include <pcmcia_/cs.h>
-
-#include "yacc_config.h"
-
-/* For assembling nice error messages */
-char *current_file;
-int current_lineno;
-
-static int lex_number(char *s);
-static int lex_string(char *s);
-static void do_source(char *fn);
-static int do_eof(void);
-
-
-/* Macros after this point can all be overridden by user definitions in
- * section 1.
- */
-
-#ifndef YY_SKIP_YYWRAP
-#ifdef __cplusplus
-extern "C" int yywrap YY_PROTO(( void ));
-#else
-extern int yywrap YY_PROTO(( void ));
-#endif
-#endif
-
-#ifndef YY_NO_UNPUT
-//mdk-stage1// static void yyunput YY_PROTO(( int c, char *buf_ptr ));
-#endif
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy YY_PROTO(( char *, yyconst char *, int ));
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen YY_PROTO(( yyconst char * ));
-#endif
-
-#ifndef YY_NO_INPUT
-#ifdef __cplusplus
-static int yyinput YY_PROTO(( void ));
-#else
-static int input YY_PROTO(( void ));
-#endif
-#endif
-
-#if YY_STACK_USED
-static int yy_start_stack_ptr = 0;
-static int yy_start_stack_depth = 0;
-static int *yy_start_stack = 0;
-#ifndef YY_NO_PUSH_STATE
-static void yy_push_state YY_PROTO(( int new_state ));
-#endif
-#ifndef YY_NO_POP_STATE
-static void yy_pop_state YY_PROTO(( void ));
-#endif
-#ifndef YY_NO_TOP_STATE
-static int yy_top_state YY_PROTO(( void ));
-#endif
-
-#else
-#define YY_NO_PUSH_STATE 1
-#define YY_NO_POP_STATE 1
-#define YY_NO_TOP_STATE 1
-#endif
-
-#ifdef YY_MALLOC_DECL
-YY_MALLOC_DECL
-#else
-#if __STDC__
-#ifndef __cplusplus
-#include <stdlib.h>
-#endif
-#else
-/* Just try to get by without declaring the routines.  This will fail
- * miserably on non-ANSI systems for which sizeof(size_t) != sizeof(int)
- * or sizeof(void*) != sizeof(int).
- */
-#endif
-#endif
-
-/* Amount of stuff to slurp up with each read. */
-#ifndef YY_READ_BUF_SIZE
-#define YY_READ_BUF_SIZE 8192
-#endif
-
-/* Copy whatever the last rule matched to the standard output. */
-
-#ifndef ECHO
-/* This used to be an fputs(), but since the string might contain NUL's,
- * we now use fwrite().
- */
-#define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
-#endif
-
-/* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
- * is returned in "result".
- */
-#ifndef YY_INPUT
-#define YY_INPUT(buf,result,max_size) \
-	if ( yy_current_buffer->yy_is_interactive ) \
-		{ \
-		int c = '*', n; \
-		for ( n = 0; n < max_size && \
-			     (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
-			buf[n] = (char) c; \
-		if ( c == '\n' ) \
-			buf[n++] = (char) c; \
-		if ( c == EOF && ferror( yyin ) ) \
-			YY_FATAL_ERROR( "input in flex scanner failed" ); \
-		result = n; \
-		} \
-	else if ( ((result = fread( buf, 1, max_size, yyin )) == 0) \
-		  && ferror( yyin ) ) \
-		YY_FATAL_ERROR( "input in flex scanner failed" );
-#endif
-
-/* No semi-colon after return; correct usage is to write "yyterminate();" -
- * we don't want an extra ';' after the "return" because that will cause
- * some compilers to complain about unreachable statements.
- */
-#ifndef yyterminate
-#define yyterminate() return YY_NULL
-#endif
-
-/* Number of entries by which start-condition stack grows. */
-#ifndef YY_START_STACK_INCR
-#define YY_START_STACK_INCR 25
-#endif
-
-/* Report a fatal error. */
-#ifndef YY_FATAL_ERROR
-#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
-#endif
-
-/* Default declaration of generated scanner - a define so the user can
- * easily add parameters.
- */
-#ifndef YY_DECL
-#define YY_DECL int yylex YY_PROTO(( void ))
-#endif
-
-/* Code executed at the beginning of each rule, after yytext and yyleng
- * have been set up.
- */
-#ifndef YY_USER_ACTION
-#define YY_USER_ACTION
-#endif
-
-/* Code executed at the end of each rule. */
-#ifndef YY_BREAK
-#define YY_BREAK break;
-#endif
-
-#define YY_RULE_SETUP \
-	YY_USER_ACTION
-
-YY_DECL
-	{
-	register yy_state_type yy_current_state;
-	register char *yy_cp = NULL, *yy_bp = NULL;
-	register int yy_act;
-
-#line 63 "lex_config.l"
-
-
-
-	if ( yy_init )
-		{
-		yy_init = 0;
-
-#ifdef YY_USER_INIT
-		YY_USER_INIT;
-#endif
-
-		if ( ! yy_start )
-			yy_start = 1;	/* first start state */
-
-		if ( ! yyin )
-			yyin = stdin;
-
-		if ( ! yyout )
-			yyout = stdout;
-
-		if ( ! yy_current_buffer )
-			yy_current_buffer =
-				yy_create_buffer( yyin, YY_BUF_SIZE );
-
-		yy_load_buffer_state();
-		}
-
-	while ( 1 )		/* loops until end-of-file is reached */
-		{
-		yy_cp = yy_c_buf_p;
-
-		/* Support of yytext. */
-		*yy_cp = yy_hold_char;
-
-		/* yy_bp points to the position in yy_ch_buf of the start of
-		 * the current run.
-		 */
-		yy_bp = yy_cp;
-
-		yy_current_state = yy_start;
-yy_match:
-		do
-			{
-			register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
-			if ( yy_accept[yy_current_state] )
-				{
-				yy_last_accepting_state = yy_current_state;
-				yy_last_accepting_cpos = yy_cp;
-				}
-			while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
-				{
-				yy_current_state = (int) yy_def[yy_current_state];
-				if ( yy_current_state >= 247 )
-					yy_c = yy_meta[(unsigned int) yy_c];
-				}
-			yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
-			++yy_cp;
-			}
-		while ( yy_base[yy_current_state] != 294 );
-
-yy_find_action:
-		yy_act = yy_accept[yy_current_state];
-		if ( yy_act == 0 )
-			{ /* have to back up */
-			yy_cp = yy_last_accepting_cpos;
-			yy_current_state = yy_last_accepting_state;
-			yy_act = yy_accept[yy_current_state];
-			}
-
-		YY_DO_BEFORE_ACTION;
-
-
-do_action:	/* This label is used only to access EOF actions. */
-
-
-		switch ( yy_act )
-	{ /* beginning of action switch */
-			case 0: /* must back up */
-			/* undo the effects of YY_DO_BEFORE_ACTION */
-			*yy_cp = yy_hold_char;
-			yy_cp = yy_last_accepting_cpos;
-			yy_current_state = yy_last_accepting_state;
-			goto yy_find_action;
-
-case 1:
-YY_RULE_SETUP
-#line 65 "lex_config.l"
-BEGIN(src);
-	YY_BREAK
-case 2:
-YY_RULE_SETUP
-#line 66 "lex_config.l"
-/* skip */ ;
-	YY_BREAK
-case 3:
-YY_RULE_SETUP
-#line 67 "lex_config.l"
-do_source(yytext); BEGIN(INITIAL);
-	YY_BREAK
-case YY_STATE_EOF(INITIAL):
-case YY_STATE_EOF(src):
-#line 68 "lex_config.l"
-if (do_eof()) yyterminate();
-	YY_BREAK
-case 4:
-YY_RULE_SETUP
-#line 70 "lex_config.l"
-current_lineno++;
-	YY_BREAK
-case 5:
-YY_RULE_SETUP
-#line 71 "lex_config.l"
-/* skip */ ;
-	YY_BREAK
-case 6:
-YY_RULE_SETUP
-#line 72 "lex_config.l"
-/* skip */ ;
-	YY_BREAK
-case 7:
-YY_RULE_SETUP
-#line 74 "lex_config.l"
-return ANONYMOUS;
-	YY_BREAK
-case 8:
-YY_RULE_SETUP
-#line 75 "lex_config.l"
-return BIND;
-	YY_BREAK
-case 9:
-YY_RULE_SETUP
-#line 76 "lex_config.l"
-return CIS;
-	YY_BREAK
-case 10:
-YY_RULE_SETUP
-#line 77 "lex_config.l"
-return CARD;
-	YY_BREAK
-case 11:
-YY_RULE_SETUP
-#line 78 "lex_config.l"
-return CLASS;
-	YY_BREAK
-case 12:
-YY_RULE_SETUP
-#line 79 "lex_config.l"
-return DEFAULT;
-	YY_BREAK
-case 13:
-YY_RULE_SETUP
-#line 80 "lex_config.l"
-return DEVICE;
-	YY_BREAK
-case 14:
-YY_RULE_SETUP
-#line 81 "lex_config.l"
-return DTYPE;
-	YY_BREAK
-case 15:
-YY_RULE_SETUP
-#line 82 "lex_config.l"
-return EXCLUDE;
-	YY_BREAK
-case 16:
-YY_RULE_SETUP
-#line 83 "lex_config.l"
-return FUNCTION;
-	YY_BREAK
-case 17:
-YY_RULE_SETUP
-#line 84 "lex_config.l"
-return INCLUDE;
-	YY_BREAK
-case 18:
-YY_RULE_SETUP
-#line 85 "lex_config.l"
-return IRQ_NO;
-	YY_BREAK
-case 19:
-YY_RULE_SETUP
-#line 86 "lex_config.l"
-return JEDEC;
-	YY_BREAK
-case 20:
-YY_RULE_SETUP
-#line 87 "lex_config.l"
-return MANFID;
-	YY_BREAK
-case 21:
-YY_RULE_SETUP
-#line 88 "lex_config.l"
-return MEMORY;
-	YY_BREAK
-case 22:
-YY_RULE_SETUP
-#line 89 "lex_config.l"
-return MODULE;
-	YY_BREAK
-case 23:
-YY_RULE_SETUP
-#line 90 "lex_config.l"
-return MTD;
-	YY_BREAK
-case 24:
-YY_RULE_SETUP
-#line 91 "lex_config.l"
-return NEEDS_MTD;
-	YY_BREAK
-case 25:
-YY_RULE_SETUP
-#line 92 "lex_config.l"
-return OPTS;
-	YY_BREAK
-case 26:
-YY_RULE_SETUP
-#line 93 "lex_config.l"
-return PCI;
-	YY_BREAK
-case 27:
-YY_RULE_SETUP
-#line 94 "lex_config.l"
-return PORT;
-	YY_BREAK
-case 28:
-YY_RULE_SETUP
-#line 95 "lex_config.l"
-return REGION;
-	YY_BREAK
-case 29:
-YY_RULE_SETUP
-#line 96 "lex_config.l"
-return RESERVE;
-	YY_BREAK
-case 30:
-YY_RULE_SETUP
-#line 97 "lex_config.l"
-return TO;
-	YY_BREAK
-case 31:
-YY_RULE_SETUP
-#line 98 "lex_config.l"
-return TUPLE;
-	YY_BREAK
-case 32:
-YY_RULE_SETUP
-#line 99 "lex_config.l"
-return VERSION;
-	YY_BREAK
-case 33:
-YY_RULE_SETUP
-#line 101 "lex_config.l"
-return lex_number("1");
-	YY_BREAK
-case 34:
-YY_RULE_SETUP
-#line 102 "lex_config.l"
-return lex_number("2");
-	YY_BREAK
-case 35:
-YY_RULE_SETUP
-#line 103 "lex_config.l"
-return lex_number("3");
-	YY_BREAK
-case 36:
-YY_RULE_SETUP
-#line 104 "lex_config.l"
-return lex_number("4");
-	YY_BREAK
-case 37:
-YY_RULE_SETUP
-#line 105 "lex_config.l"
-return lex_number("5");
-	YY_BREAK
-case 38:
-YY_RULE_SETUP
-#line 106 "lex_config.l"
-return lex_number("6");
-	YY_BREAK
-case 39:
-YY_RULE_SETUP
-#line 107 "lex_config.l"
-return lex_number("7");
-	YY_BREAK
-case 40:
-YY_RULE_SETUP
-#line 108 "lex_config.l"
-return lex_number("8");
-	YY_BREAK
-case 41:
-YY_RULE_SETUP
-#line 110 "lex_config.l"
-return lex_number(yytext);
-	YY_BREAK
-case 42:
-YY_RULE_SETUP
-#line 112 "lex_config.l"
-return lex_number(yytext);
-	YY_BREAK
-case 43:
-YY_RULE_SETUP
-#line 114 "lex_config.l"
-return lex_string(yytext);
-	YY_BREAK
-case 44:
-YY_RULE_SETUP
-#line 116 "lex_config.l"
-return yytext[0];
-	YY_BREAK
-case 45:
-YY_RULE_SETUP
-#line 118 "lex_config.l"
-ECHO;
-	YY_BREAK
-
-	case YY_END_OF_BUFFER:
-		{
-		/* Amount of text matched not including the EOB char. */
-		int yy_amount_of_matched_text = (int) (yy_cp - yytext_ptr) - 1;
-
-		/* Undo the effects of YY_DO_BEFORE_ACTION. */
-		*yy_cp = yy_hold_char;
-		YY_RESTORE_YY_MORE_OFFSET
-
-		if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_NEW )
-			{
-			/* We're scanning a new file or input source.  It's
-			 * possible that this happened because the user
-			 * just pointed yyin at a new source and called
-			 * yylex().  If so, then we have to assure
-			 * consistency between yy_current_buffer and our
-			 * globals.  Here is the right place to do so, because
-			 * this is the first action (other than possibly a
-			 * back-up) that will match for the new input source.
-			 */
-			yy_n_chars = yy_current_buffer->yy_n_chars;
-			yy_current_buffer->yy_input_file = yyin;
-			yy_current_buffer->yy_buffer_status = YY_BUFFER_NORMAL;
-			}
-
-		/* Note that here we test for yy_c_buf_p "<=" to the position
-		 * of the first EOB in the buffer, since yy_c_buf_p will
-		 * already have been incremented past the NUL character
-		 * (since all states make transitions on EOB to the
-		 * end-of-buffer state).  Contrast this with the test
-		 * in input().
-		 */
-		if ( yy_c_buf_p <= &yy_current_buffer->yy_ch_buf[yy_n_chars] )
-			{ /* This was really a NUL. */
-			yy_state_type yy_next_state;
-
-			yy_c_buf_p = yytext_ptr + yy_amount_of_matched_text;
-
-			yy_current_state = yy_get_previous_state();
-
-			/* Okay, we're now positioned to make the NUL
-			 * transition.  We couldn't have
-			 * yy_get_previous_state() go ahead and do it
-			 * for us because it doesn't know how to deal
-			 * with the possibility of jamming (and we don't
-			 * want to build jamming into it because then it
-			 * will run more slowly).
-			 */
-
-			yy_next_state = yy_try_NUL_trans( yy_current_state );
-
-			yy_bp = yytext_ptr + YY_MORE_ADJ;
-
-			if ( yy_next_state )
-				{
-				/* Consume the NUL. */
-				yy_cp = ++yy_c_buf_p;
-				yy_current_state = yy_next_state;
-				goto yy_match;
-				}
-
-			else
-				{
-				yy_cp = yy_c_buf_p;
-				goto yy_find_action;
-				}
-			}
-
-		else switch ( yy_get_next_buffer() )
-			{
-			case EOB_ACT_END_OF_FILE:
-				{
-				yy_did_buffer_switch_on_eof = 0;
-
-				if ( yywrap() )
-					{
-					/* Note: because we've taken care in
-					 * yy_get_next_buffer() to have set up
-					 * yytext, we can now set up
-					 * yy_c_buf_p so that if some total
-					 * hoser (like flex itself) wants to
-					 * call the scanner after we return the
-					 * YY_NULL, it'll still work - another
-					 * YY_NULL will get returned.
-					 */
-					yy_c_buf_p = yytext_ptr + YY_MORE_ADJ;
-
-					yy_act = YY_STATE_EOF(YY_START);
-					goto do_action;
-					}
-
-				else
-					{
-					if ( ! yy_did_buffer_switch_on_eof )
-						YY_NEW_FILE;
-					}
-				break;
-				}
-
-			case EOB_ACT_CONTINUE_SCAN:
-				yy_c_buf_p =
-					yytext_ptr + yy_amount_of_matched_text;
-
-				yy_current_state = yy_get_previous_state();
-
-				yy_cp = yy_c_buf_p;
-				yy_bp = yytext_ptr + YY_MORE_ADJ;
-				goto yy_match;
-
-			case EOB_ACT_LAST_MATCH:
-				yy_c_buf_p =
-				&yy_current_buffer->yy_ch_buf[yy_n_chars];
-
-				yy_current_state = yy_get_previous_state();
-
-				yy_cp = yy_c_buf_p;
-				yy_bp = yytext_ptr + YY_MORE_ADJ;
-				goto yy_find_action;
-			}
-		break;
-		}
-
-	default:
-		YY_FATAL_ERROR(
-			"fatal flex scanner internal error--no action found" );
-	} /* end of action switch */
-		} /* end of scanning one token */
-	} /* end of yylex */
-
-
-/* yy_get_next_buffer - try to read in a new buffer
- *
- * Returns a code representing an action:
- *	EOB_ACT_LAST_MATCH -
- *	EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- *	EOB_ACT_END_OF_FILE - end of file
- */
-
-static int yy_get_next_buffer()
-	{
-	register char *dest = yy_current_buffer->yy_ch_buf;
-	register char *source = yytext_ptr;
-	register int number_to_move, i;
-	int ret_val;
-
-	if ( yy_c_buf_p > &yy_current_buffer->yy_ch_buf[yy_n_chars + 1] )
-		YY_FATAL_ERROR(
-		"fatal flex scanner internal error--end of buffer missed" );
-
-	if ( yy_current_buffer->yy_fill_buffer == 0 )
-		{ /* Don't try to fill the buffer, so this is an EOF. */
-		if ( yy_c_buf_p - yytext_ptr - YY_MORE_ADJ == 1 )
-			{
-			/* We matched a single character, the EOB, so
-			 * treat this as a final EOF.
-			 */
-			return EOB_ACT_END_OF_FILE;
-			}
-
-		else
-			{
-			/* We matched some text prior to the EOB, first
-			 * process it.
-			 */
-			return EOB_ACT_LAST_MATCH;
-			}
-		}
-
-	/* Try to read more data. */
-
-	/* First move last chars to start of buffer. */
-	number_to_move = (int) (yy_c_buf_p - yytext_ptr) - 1;
-
-	for ( i = 0; i < number_to_move; ++i )
-		*(dest++) = *(source++);
-
-	if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_EOF_PENDING )
-		/* don't do the read, it's not guaranteed to return an EOF,
-		 * just force an EOF
-		 */
-		yy_current_buffer->yy_n_chars = yy_n_chars = 0;
-
-	else
-		{
-		int num_to_read =
-			yy_current_buffer->yy_buf_size - number_to_move - 1;
-
-		while ( num_to_read <= 0 )
-			{ /* Not enough room in the buffer - grow it. */
-#ifdef YY_USES_REJECT
-			YY_FATAL_ERROR(
-"input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
-#else
-
-			/* just a shorter name for the current buffer */
-			YY_BUFFER_STATE b = yy_current_buffer;
-
-			int yy_c_buf_p_offset =
-				(int) (yy_c_buf_p - b->yy_ch_buf);
-
-			if ( b->yy_is_our_buffer )
-				{
-				int new_size = b->yy_buf_size * 2;
-
-				if ( new_size <= 0 )
-					b->yy_buf_size += b->yy_buf_size / 8;
-				else
-					b->yy_buf_size *= 2;
-
-				b->yy_ch_buf = (char *)
-					/* Include room in for 2 EOB chars. */
-					yy_flex_realloc( (void *) b->yy_ch_buf,
-							 b->yy_buf_size + 2 );
-				}
-			else
-				/* Can't grow it, we don't own it. */
-				b->yy_ch_buf = 0;
-
-			if ( ! b->yy_ch_buf )
-				YY_FATAL_ERROR(
-				"fatal error - scanner input buffer overflow" );
-
-			yy_c_buf_p = &b->yy_ch_buf[yy_c_buf_p_offset];
-
-			num_to_read = yy_current_buffer->yy_buf_size -
-						number_to_move - 1;
-#endif
-			}
-
-		if ( num_to_read > YY_READ_BUF_SIZE )
-			num_to_read = YY_READ_BUF_SIZE;
-
-		/* Read in more data. */
-		YY_INPUT( (&yy_current_buffer->yy_ch_buf[number_to_move]),
-			yy_n_chars, num_to_read );
-
-		yy_current_buffer->yy_n_chars = yy_n_chars;
-		}
-
-	if ( yy_n_chars == 0 )
-		{
-		if ( number_to_move == YY_MORE_ADJ )
-			{
-			ret_val = EOB_ACT_END_OF_FILE;
-			yyrestart( yyin );
-			}
-
-		else
-			{
-			ret_val = EOB_ACT_LAST_MATCH;
-			yy_current_buffer->yy_buffer_status =
-				YY_BUFFER_EOF_PENDING;
-			}
-		}
-
-	else
-		ret_val = EOB_ACT_CONTINUE_SCAN;
-
-	yy_n_chars += number_to_move;
-	yy_current_buffer->yy_ch_buf[yy_n_chars] = YY_END_OF_BUFFER_CHAR;
-	yy_current_buffer->yy_ch_buf[yy_n_chars + 1] = YY_END_OF_BUFFER_CHAR;
-
-	yytext_ptr = &yy_current_buffer->yy_ch_buf[0];
-
-	return ret_val;
-	}
-
-
-/* yy_get_previous_state - get the state just before the EOB char was reached */
-
-static yy_state_type yy_get_previous_state()
-	{
-	register yy_state_type yy_current_state;
-	register char *yy_cp;
-
-	yy_current_state = yy_start;
-
-	for ( yy_cp = yytext_ptr + YY_MORE_ADJ; yy_cp < yy_c_buf_p; ++yy_cp )
-		{
-		register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
-		if ( yy_accept[yy_current_state] )
-			{
-			yy_last_accepting_state = yy_current_state;
-			yy_last_accepting_cpos = yy_cp;
-			}
-		while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
-			{
-			yy_current_state = (int) yy_def[yy_current_state];
-			if ( yy_current_state >= 247 )
-				yy_c = yy_meta[(unsigned int) yy_c];
-			}
-		yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
-		}
-
-	return yy_current_state;
-	}
-
-
-/* yy_try_NUL_trans - try to make a transition on the NUL character
- *
- * synopsis
- *	next_state = yy_try_NUL_trans( current_state );
- */
-
-#ifdef YY_USE_PROTOS
-static yy_state_type yy_try_NUL_trans( yy_state_type yy_current_state )
-#else
-static yy_state_type yy_try_NUL_trans( yy_current_state )
-yy_state_type yy_current_state;
-#endif
-	{
-	register int yy_is_jam;
-	register char *yy_cp = yy_c_buf_p;
-
-	register YY_CHAR yy_c = 1;
-	if ( yy_accept[yy_current_state] )
-		{
-		yy_last_accepting_state = yy_current_state;
-		yy_last_accepting_cpos = yy_cp;
-		}
-	while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
-		{
-		yy_current_state = (int) yy_def[yy_current_state];
-		if ( yy_current_state >= 247 )
-			yy_c = yy_meta[(unsigned int) yy_c];
-		}
-	yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
-	yy_is_jam = (yy_current_state == 246);
-
-	return yy_is_jam ? 0 : yy_current_state;
-	}
-
-
-//mdk-stage1// #ifndef YY_NO_UNPUT
-//mdk-stage1// #ifdef YY_USE_PROTOS
-//mdk-stage1// static void yyunput( int c, register char *yy_bp )
-//mdk-stage1// #else
-//mdk-stage1// static void yyunput( c, yy_bp )
-//mdk-stage1// int c;
-//mdk-stage1// register char *yy_bp;
-//mdk-stage1// #endif
-//mdk-stage1// 	{
-//mdk-stage1// 	register char *yy_cp = yy_c_buf_p;
-//mdk-stage1// 
-//mdk-stage1// 	/* undo effects of setting up yytext */
-//mdk-stage1// 	*yy_cp = yy_hold_char;
-//mdk-stage1// 
-//mdk-stage1// 	if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
-//mdk-stage1// 		{ /* need to shift things up to make room */
-//mdk-stage1// 		/* +2 for EOB chars. */
-//mdk-stage1// 		register int number_to_move = yy_n_chars + 2;
-//mdk-stage1// 		register char *dest = &yy_current_buffer->yy_ch_buf[
-//mdk-stage1// 					yy_current_buffer->yy_buf_size + 2];
-//mdk-stage1// 		register char *source =
-//mdk-stage1// 				&yy_current_buffer->yy_ch_buf[number_to_move];
-//mdk-stage1// 
-//mdk-stage1// 		while ( source > yy_current_buffer->yy_ch_buf )
-//mdk-stage1// 			*--dest = *--source;
-//mdk-stage1// 
-//mdk-stage1// 		yy_cp += (int) (dest - source);
-//mdk-stage1// 		yy_bp += (int) (dest - source);
-//mdk-stage1// 		yy_current_buffer->yy_n_chars =
-//mdk-stage1// 			yy_n_chars = yy_current_buffer->yy_buf_size;
-//mdk-stage1// 
-//mdk-stage1// 		if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
-//mdk-stage1// 			YY_FATAL_ERROR( "flex scanner push-back overflow" );
-//mdk-stage1// 		}
-//mdk-stage1// 
-//mdk-stage1// 	*--yy_cp = (char) c;
-//mdk-stage1// 
-//mdk-stage1// 
-//mdk-stage1// 	yytext_ptr = yy_bp;
-//mdk-stage1// 	yy_hold_char = *yy_cp;
-//mdk-stage1// 	yy_c_buf_p = yy_cp;
-//mdk-stage1// 	}
-//mdk-stage1// #endif	/* ifndef YY_NO_UNPUT */
-
-
-#ifdef __cplusplus
-static int yyinput()
-#else
-static int input()
-#endif
-	{
-	int c;
-
-	*yy_c_buf_p = yy_hold_char;
-
-	if ( *yy_c_buf_p == YY_END_OF_BUFFER_CHAR )
-		{
-		/* yy_c_buf_p now points to the character we want to return.
-		 * If this occurs *before* the EOB characters, then it's a
-		 * valid NUL; if not, then we've hit the end of the buffer.
-		 */
-		if ( yy_c_buf_p < &yy_current_buffer->yy_ch_buf[yy_n_chars] )
-			/* This was really a NUL. */
-			*yy_c_buf_p = '\0';
-
-		else
-			{ /* need more input */
-			int offset = yy_c_buf_p - yytext_ptr;
-			++yy_c_buf_p;
-
-			switch ( yy_get_next_buffer() )
-				{
-				case EOB_ACT_LAST_MATCH:
-					/* This happens because yy_g_n_b()
-					 * sees that we've accumulated a
-					 * token and flags that we need to
-					 * try matching the token before
-					 * proceeding.  But for input(),
-					 * there's no matching to consider.
-					 * So convert the EOB_ACT_LAST_MATCH
-					 * to EOB_ACT_END_OF_FILE.
-					 */
-
-					/* Reset buffer status. */
-					yyrestart( yyin );
-
-					/* fall through */
-
-				case EOB_ACT_END_OF_FILE:
-					{
-					if ( yywrap() )
-						return EOF;
-
-					if ( ! yy_did_buffer_switch_on_eof )
-						YY_NEW_FILE;
-#ifdef __cplusplus
-					return yyinput();
-#else
-					return input();
-#endif
-					}
-
-				case EOB_ACT_CONTINUE_SCAN:
-					yy_c_buf_p = yytext_ptr + offset;
-					break;
-				}
-			}
-		}
-
-	c = *(unsigned char *) yy_c_buf_p;	/* cast for 8-bit char's */
-	*yy_c_buf_p = '\0';	/* preserve yytext */
-	yy_hold_char = *++yy_c_buf_p;
-
-
-	return c;
-	}
-
-
-#ifdef YY_USE_PROTOS
-void yyrestart( FILE *input_file )
-#else
-void yyrestart( input_file )
-FILE *input_file;
-#endif
-	{
-	if ( ! yy_current_buffer )
-		yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE );
-
-	yy_init_buffer( yy_current_buffer, input_file );
-	yy_load_buffer_state();
-	}
-
-
-#ifdef YY_USE_PROTOS
-void yy_switch_to_buffer( YY_BUFFER_STATE new_buffer )
-#else
-void yy_switch_to_buffer( new_buffer )
-YY_BUFFER_STATE new_buffer;
-#endif
-	{
-	if ( yy_current_buffer == new_buffer )
-		return;
-
-	if ( yy_current_buffer )
-		{
-		/* Flush out information for old buffer. */
-		*yy_c_buf_p = yy_hold_char;
-		yy_current_buffer->yy_buf_pos = yy_c_buf_p;
-		yy_current_buffer->yy_n_chars = yy_n_chars;
-		}
-
-	yy_current_buffer = new_buffer;
-	yy_load_buffer_state();
-
-	/* We don't actually know whether we did this switch during
-	 * EOF (yywrap()) processing, but the only time this flag
-	 * is looked at is after yywrap() is called, so it's safe
-	 * to go ahead and always set it.
-	 */
-	yy_did_buffer_switch_on_eof = 1;
-	}
-
-
-#ifdef YY_USE_PROTOS
-void yy_load_buffer_state( void )
-#else
-void yy_load_buffer_state()
-#endif
-	{
-	yy_n_chars = yy_current_buffer->yy_n_chars;
-	yytext_ptr = yy_c_buf_p = yy_current_buffer->yy_buf_pos;
-	yyin = yy_current_buffer->yy_input_file;
-	yy_hold_char = *yy_c_buf_p;
-	}
-
-
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_create_buffer( FILE *file, int size )
-#else
-YY_BUFFER_STATE yy_create_buffer( file, size )
-FILE *file;
-int size;
-#endif
-	{
-	YY_BUFFER_STATE b;
-
-	b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
-	if ( ! b )
-		YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
-	b->yy_buf_size = size;
-
-	/* yy_ch_buf has to be 2 characters longer than the size given because
-	 * we need to put in 2 end-of-buffer characters.
-	 */
-	b->yy_ch_buf = (char *) yy_flex_alloc( b->yy_buf_size + 2 );
-	if ( ! b->yy_ch_buf )
-		YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
-	b->yy_is_our_buffer = 1;
-
-	yy_init_buffer( b, file );
-
-	return b;
-	}
-
-
-#ifdef YY_USE_PROTOS
-void yy_delete_buffer( YY_BUFFER_STATE b )
-#else
-void yy_delete_buffer( b )
-YY_BUFFER_STATE b;
-#endif
-	{
-	if ( ! b )
-		return;
-
-	if ( b == yy_current_buffer )
-		yy_current_buffer = (YY_BUFFER_STATE) 0;
-
-	if ( b->yy_is_our_buffer )
-		yy_flex_free( (void *) b->yy_ch_buf );
-
-	yy_flex_free( (void *) b );
-	}
-
-
-#ifndef YY_ALWAYS_INTERACTIVE
-#ifndef YY_NEVER_INTERACTIVE
-extern int isatty YY_PROTO(( int ));
-#endif
-#endif
-
-#ifdef YY_USE_PROTOS
-void yy_init_buffer( YY_BUFFER_STATE b, FILE *file )
-#else
-void yy_init_buffer( b, file )
-YY_BUFFER_STATE b;
-FILE *file;
-#endif
-
-
-	{
-	yy_flush_buffer( b );
-
-	b->yy_input_file = file;
-	b->yy_fill_buffer = 1;
-
-#if YY_ALWAYS_INTERACTIVE
-	b->yy_is_interactive = 1;
-#else
-#if YY_NEVER_INTERACTIVE
-	b->yy_is_interactive = 0;
-#else
-	b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
-#endif
-#endif
-	}
-
-
-#ifdef YY_USE_PROTOS
-void yy_flush_buffer( YY_BUFFER_STATE b )
-#else
-void yy_flush_buffer( b )
-YY_BUFFER_STATE b;
-#endif
-
-	{
-	if ( ! b )
-		return;
-
-	b->yy_n_chars = 0;
-
-	/* We always need two end-of-buffer characters.  The first causes
-	 * a transition to the end-of-buffer state.  The second causes
-	 * a jam in that state.
-	 */
-	b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
-	b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
-
-	b->yy_buf_pos = &b->yy_ch_buf[0];
-
-	b->yy_at_bol = 1;
-	b->yy_buffer_status = YY_BUFFER_NEW;
-
-	if ( b == yy_current_buffer )
-		yy_load_buffer_state();
-	}
-
-
-#ifndef YY_NO_SCAN_BUFFER
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_scan_buffer( char *base, yy_size_t size )
-#else
-YY_BUFFER_STATE yy_scan_buffer( base, size )
-char *base;
-yy_size_t size;
-#endif
-	{
-	YY_BUFFER_STATE b;
-
-	if ( size < 2 ||
-	     base[size-2] != YY_END_OF_BUFFER_CHAR ||
-	     base[size-1] != YY_END_OF_BUFFER_CHAR )
-		/* They forgot to leave room for the EOB's. */
-		return 0;
-
-	b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
-	if ( ! b )
-		YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
-
-	b->yy_buf_size = size - 2;	/* "- 2" to take care of EOB's */
-	b->yy_buf_pos = b->yy_ch_buf = base;
-	b->yy_is_our_buffer = 0;
-	b->yy_input_file = 0;
-	b->yy_n_chars = b->yy_buf_size;
-	b->yy_is_interactive = 0;
-	b->yy_at_bol = 1;
-	b->yy_fill_buffer = 0;
-	b->yy_buffer_status = YY_BUFFER_NEW;
-
-	yy_switch_to_buffer( b );
-
-	return b;
-	}
-#endif
-
-
-#ifndef YY_NO_SCAN_STRING
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_scan_string( yyconst char *yy_str )
-#else
-YY_BUFFER_STATE yy_scan_string( yy_str )
-yyconst char *yy_str;
-#endif
-	{
-	int len;
-	for ( len = 0; yy_str[len]; ++len )
-		;
-
-	return yy_scan_bytes( yy_str, len );
-	}
-#endif
-
-
-#ifndef YY_NO_SCAN_BYTES
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_scan_bytes( yyconst char *bytes, int len )
-#else
-YY_BUFFER_STATE yy_scan_bytes( bytes, len )
-yyconst char *bytes;
-int len;
-#endif
-	{
-	YY_BUFFER_STATE b;
-	char *buf;
-	yy_size_t n;
-	int i;
-
-	/* Get memory for full buffer, including space for trailing EOB's. */
-	n = len + 2;
-	buf = (char *) yy_flex_alloc( n );
-	if ( ! buf )
-		YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
-
-	for ( i = 0; i < len; ++i )
-		buf[i] = bytes[i];
-
-	buf[len] = buf[len+1] = YY_END_OF_BUFFER_CHAR;
-
-	b = yy_scan_buffer( buf, n );
-	if ( ! b )
-		YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
-
-	/* It's okay to grow etc. this buffer, and we should throw it
-	 * away when we're done.
-	 */
-	b->yy_is_our_buffer = 1;
-
-	return b;
-	}
-#endif
-
-
-#ifndef YY_NO_PUSH_STATE
-#ifdef YY_USE_PROTOS
-static void yy_push_state( int new_state )
-#else
-static void yy_push_state( new_state )
-int new_state;
-#endif
-	{
-	if ( yy_start_stack_ptr >= yy_start_stack_depth )
-		{
-		yy_size_t new_size;
-
-		yy_start_stack_depth += YY_START_STACK_INCR;
-		new_size = yy_start_stack_depth * sizeof( int );
-
-		if ( ! yy_start_stack )
-			yy_start_stack = (int *) yy_flex_alloc( new_size );
-
-		else
-			yy_start_stack = (int *) yy_flex_realloc(
-					(void *) yy_start_stack, new_size );
-
-		if ( ! yy_start_stack )
-			YY_FATAL_ERROR(
-			"out of memory expanding start-condition stack" );
-		}
-
-	yy_start_stack[yy_start_stack_ptr++] = YY_START;
-
-	BEGIN(new_state);
-	}
-#endif
-
-
-#ifndef YY_NO_POP_STATE
-static void yy_pop_state()
-	{
-	if ( --yy_start_stack_ptr < 0 )
-		YY_FATAL_ERROR( "start-condition stack underflow" );
-
-	BEGIN(yy_start_stack[yy_start_stack_ptr]);
-	}
-#endif
-
-
-#ifndef YY_NO_TOP_STATE
-static int yy_top_state()
-	{
-	return yy_start_stack[yy_start_stack_ptr - 1];
-	}
-#endif
-
-#ifndef YY_EXIT_FAILURE
-#define YY_EXIT_FAILURE 2
-#endif
-
-#ifdef YY_USE_PROTOS
-static void yy_fatal_error( yyconst char msg[] )
-#else
-static void yy_fatal_error( msg )
-char msg[];
-#endif
-	{
-	(void) fprintf( stderr, "%s\n", msg );
-	exit( YY_EXIT_FAILURE );
-	}
-
-
-
-/* Redefine yyless() so it works in section 3 code. */
-
-#undef yyless
-#define yyless(n) \
-	do \
-		{ \
-		/* Undo effects of setting up yytext. */ \
-		yytext[yyleng] = yy_hold_char; \
-		yy_c_buf_p = yytext + n; \
-		yy_hold_char = *yy_c_buf_p; \
-		*yy_c_buf_p = '\0'; \
-		yyleng = n; \
-		} \
-	while ( 0 )
-
-
-/* Internal utility routines. */
-
-#ifndef yytext_ptr
-#ifdef YY_USE_PROTOS
-static void yy_flex_strncpy( char *s1, yyconst char *s2, int n )
-#else
-static void yy_flex_strncpy( s1, s2, n )
-char *s1;
-yyconst char *s2;
-int n;
-#endif
-	{
-	register int i;
-	for ( i = 0; i < n; ++i )
-		s1[i] = s2[i];
-	}
-#endif
-
-#ifdef YY_NEED_STRLEN
-#ifdef YY_USE_PROTOS
-static int yy_flex_strlen( yyconst char *s )
-#else
-static int yy_flex_strlen( s )
-yyconst char *s;
-#endif
-	{
-	register int n;
-	for ( n = 0; s[n]; ++n )
-		;
-
-	return n;
-	}
-#endif
-
-
-#ifdef YY_USE_PROTOS
-static void *yy_flex_alloc( yy_size_t size )
-#else
-static void *yy_flex_alloc( size )
-yy_size_t size;
-#endif
-	{
-	return (void *) malloc( size );
-	}
-
-#ifdef YY_USE_PROTOS
-static void *yy_flex_realloc( void *ptr, yy_size_t size )
-#else
-static void *yy_flex_realloc( ptr, size )
-void *ptr;
-yy_size_t size;
-#endif
-	{
-	/* The cast to (char *) in the following accommodates both
-	 * implementations that use char* generic pointers, and those
-	 * that use void* generic pointers.  It works with the latter
-	 * because both ANSI C and C++ allow castless assignment from
-	 * any pointer type to void*, and deal with argument conversions
-	 * as though doing an assignment.
-	 */
-	return (void *) realloc( (char *) ptr, size );
-	}
-
-#ifdef YY_USE_PROTOS
-static void yy_flex_free( void *ptr )
-#else
-static void yy_flex_free( ptr )
-void *ptr;
-#endif
-	{
-	free( ptr );
-	}
-
-#if YY_MAIN
-int main()
-	{
-	yylex();
-	return 0;
-	}
-#endif
-#line 118 "lex_config.l"
-
-
-#ifndef yywrap
-int yywrap() { return 1; }
-#endif
-
-/*======================================================================
-
-    Stuff to parse basic data types
-
-======================================================================*/
-
-static int lex_number(char *s)
-{
-    yylval.num = strtoul(s, NULL, 0);
-    return NUMBER;
-}
-
-static int lex_string(char *s)
-{
-    int n = strlen(s);
-    yylval.str = malloc(n-1);
-    strncpy(yylval.str, s+1, n-2);
-    yylval.str[n-2] = '\0';
-    return STRING;
-}
-
-/*======================================================================
-
-    Code to support nesting of configuration files
-
-======================================================================*/
-
-#define MAX_SOURCE_DEPTH 4
-struct source_stack {
-    YY_BUFFER_STATE	buffer;
-    char		*filename;
-    int			lineno, fileno;
-    FILE		*file;
-    glob_t		glob;
-} source_stack[MAX_SOURCE_DEPTH];
-static int source_stack_ptr = 0;
-static int parse_env = 0;
-
-static int get_glob(void)
-{
-    struct source_stack *s = &source_stack[source_stack_ptr];
-    while (s->fileno < s->glob.gl_pathc) {
-	char *fn = s->glob.gl_pathv[s->fileno];
-	s->file = fopen(fn, "r");
-	if (s->file == NULL) {
-	    if (strpbrk(fn, "?*[") == NULL)
-		syslog(LOG_INFO, "could not open '%s': %m", fn);
-	    s->fileno++;
-	} else {
-	    current_lineno = 1;
-	    current_file = strdup(fn);
-	    yy_switch_to_buffer(yy_create_buffer(s->file, YY_BUF_SIZE));
-	    source_stack_ptr++;
-	    s->fileno++;
-	    return 0;
-	}
-    }
-    return -1;
-}
-
-static void do_source(char *fn)
-{
-    struct source_stack *s = &source_stack[source_stack_ptr];
-
-    if (source_stack_ptr >= MAX_SOURCE_DEPTH) {
-	syslog(LOG_INFO, "source depth limit exceeded");
-	return;
-    }
-    glob(fn, GLOB_NOCHECK, NULL, &s->glob);
-    s->fileno = 0;
-    s->buffer = YY_CURRENT_BUFFER;
-    s->lineno = current_lineno;
-    s->filename = current_file;
-    get_glob();
-}
-
-static int do_eof(void)
-{
-    struct source_stack *s = &source_stack[--source_stack_ptr];
-    if (source_stack_ptr < 0) {
-	if (parse_env == 0) {
-	    char *t = getenv("PCMCIA_OPTS");
-	    if (t == NULL) return -1;
-	    parse_env = 1;
-	    source_stack_ptr = 0;
-	    current_file = "PCMCIA_OPTS";
-	    current_lineno = 1;
-	    yy_scan_string(t);
-	    return 0;
-	} else
-	    return -1;
-    }
-    fclose(s->file);
-    free(current_file);
-    yy_delete_buffer(YY_CURRENT_BUFFER);
-    if (get_glob() != 0) {
-	yy_switch_to_buffer(s->buffer);
-	current_lineno = s->lineno;
-	current_file = s->filename;
-    }
-    return 0;
-}
-
-/*======================================================================
-
-    The main entry point... returns -1 if the file can't be accessed.
-
-======================================================================*/
-int yyparse(void);
-
-int parse_configfile(char *fn)
-{
-    FILE *f;
-    
-    f = fopen(fn, "r");
-    if (!f) {
-	syslog(LOG_INFO, "could not open '%s': %m", fn);
-	return -1;
-    }
-    current_lineno = 1;
-    current_file = fn;
-    source_stack_ptr = 0;
-    yyrestart(f);
-    yyparse();
-    fclose(f);
-    return 0;
-}
-
diff --git a/mdk-stage1/pcmcia_/merge_from_pcitable b/mdk-stage1/pcmcia_/merge_from_pcitable
deleted file mode 100755
index 74fc56f31..000000000
--- a/mdk-stage1/pcmcia_/merge_from_pcitable
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/usr/bin/perl
-
-# This program will show on stdout yenta_socket stuff from pcitable
-# which is not in probe.c
-
-use MDK::Common;
-
-my @probelines = cat_('probe.c');
-my $status = 0;
-foreach (@probelines) {
-    if ($status == 0) {
-	/^pci_id_t pci_id\[\] = {/ and $status = 1;
-    } elsif ($status == 1) {
-	/^\s*{\s*0x([\da-f]+),\s*0x([\da-f]+),\s*"([^"]*)",\s*"([^"]*)"\s*}/
-	  and push @probes, { vendor => $1, device => $2, tag => $3, name => $4, vd => "$1$2" };
-	/^};/ and last;
-    }
-}
-
-require '/usr/bin/merge2pcitable.pl';
-my $drivers = read_pcitable("/usr/share/ldetect-lst/pcitable");
-
-foreach my $k (sort keys %$drivers) {
-    $v = $drivers->{$k};
-    $k =~ /^(....)(....)/;
-    push @pcitable, { vendor => $1, device => $2, driver => $v->[0], name => $v->[1], vd => "$1$2" };
-}
-
-my @res;
-print "Missing in `probe.c':\n";
-foreach my $p (@pcitable) {
-    next if $p->{driver} ne 'yenta_socket';
-    member($p->{vd}, map { $_->{vd} } @probes) or
-      push @res, "    { 0x$p->{vendor}, 0x$p->{device}, \"..\", \"$p->{name}\" },\n";
-}
-print sort @res;
-@res = ();
-print "\n";
-
-print "Missing in pcitable:\n";
-foreach my $p (@probes) {
-    my @r = grep { $_->{vd} eq $p->{vd} } @pcitable;
-    @r > 1 and die "duplicate entry in pcitable <$p->{vd}>\n";
-    if (@r && $r[0]->{driver} ne 'yenta_socket') {
-	push @res, "0x$p->{vendor}\t0x$p->{device}\t\"yenta_socket\"\t\"$r[0]->{name}\"\n";
-	$r[0]->{driver} ne 'unknown' and print STDERR "WARNING, driver for <$p->{vd}> was <$r[0]->{driver}>\n";
-    }
-}
-print sort @res;
-@res = ();
-print "\n";
diff --git a/mdk-stage1/pcmcia_/pcmcia.h b/mdk-stage1/pcmcia_/pcmcia.h
deleted file mode 100644
index 1967b3497..000000000
--- a/mdk-stage1/pcmcia_/pcmcia.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _PCMCIA_CARDMGR_INTERFACE_H_
-#define _PCMCIA_CARDMGR_INTERFACE_H_
-
-char * pcmcia_probe(void);
-int cardmgr_call(void);
-
-#endif
diff --git a/mdk-stage1/pcmcia_/probe.c b/mdk-stage1/pcmcia_/probe.c
deleted file mode 100644
index 9877ad404..000000000
--- a/mdk-stage1/pcmcia_/probe.c
+++ /dev/null
@@ -1,513 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000-2001 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * Code comes from /anonymous@projects.sourceforge.net:/pub/pcmcia-cs/pcmcia-cs-3.1.29.tar.bz2
- */
-
-/*======================================================================
-
-    PCMCIA controller probe
-
-    probe.c 1.55 2001/08/24 12:19:20
-
-    The contents of this file are subject to the Mozilla Public
-    License Version 1.1 (the "License"); you may not use this file
-    except in compliance with the License. You may obtain a copy of
-    the License at http://www.mozilla.org/MPL/
-
-    Software distributed under the License is distributed on an "AS
-    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-    implied. See the License for the specific language governing
-    rights and limitations under the License.
-
-    The initial developer of the original code is David A. Hinds
-    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
-    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
-
-    Alternatively, the contents of this file may be used under the
-    terms of the GNU General Public License version 2 (the "GPL"), in
-    which case the provisions of the GPL are applicable instead of the
-    above.  If you wish to allow the use of your version of this file
-    only under the terms of the GPL and not to allow others to use
-    your version of this file under the MPL, indicate your decision
-    by deleting the provisions above and replace them with the notice
-    and other provisions required by the GPL.  If you do not delete
-    the provisions above, a recipient may use your version of this
-    file under either the MPL or the GPL.
-    
-======================================================================*/
-
-#include <sys/types.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-
-//mdk-stage1// #include <pcmcia/config.h>
-#include "log.h"
-#include "pcmcia.h"
-
-/*====================================================================*/
-
-//mdk-stage1// #ifdef CONFIG_PCI
-
-typedef struct {
-    u_short	vendor, device;
-    char	*tag;
-    char	*name;
-} pci_id_t;
-
-pci_id_t pci_id[] = {
-    { 0x1013, 0x1100, "Cirrus Logic CL 6729", "Cirrus PD6729" },
-    { 0x1013, 0x1110, "Cirrus Logic PD 6832", "Cirrus PD6832" },
-    { 0x10b3, 0xb106, "SMC 34C90", "SMC 34C90" },
-    { 0x1180, 0x0465, "Ricoh RL5C465", "Ricoh RL5C465" },
-    { 0x1180, 0x0466, "Ricoh RL5C466", "Ricoh RL5C466" },
-    { 0x1180, 0x0475, "Ricoh RL5C475", "Ricoh RL5C475" },
-    { 0x1180, 0x0476, "Ricoh RL5C476", "Ricoh RL5C476" },
-    { 0x1180, 0x0477, "Ricoh RL5c477", "Ricoh RL5c477" },   //mdk-stage1// added from pcitable
-    { 0x1180, 0x0478, "Ricoh RL5C478", "Ricoh RL5C478" },
-    { 0x104c, 0xac12, "Texas Instruments PCI1130", "TI 1130" },
-    { 0x104c, 0xac13, "Texas Instruments PCI1031", "TI 1031" },
-    { 0x104c, 0xac15, "Texas Instruments PCI1131", "TI 1131" },
-    { 0x104c, 0xac1a, "Texas Instruments PCI1210", "TI 1210" },
-    { 0x104c, 0xac1e, "Texas Instruments PCI1211", "TI 1211" },
-    { 0x104c, 0xac17, "Texas Instruments PCI1220", "TI 1220" },
-    { 0x104c, 0xac19, "Texas Instruments PCI1221", "TI 1221" },
-    { 0x104c, 0xac1c, "Texas Instruments PCI1225", "TI 1225" },
-    { 0x104c, 0xac16, "Texas Instruments PCI1250", "TI 1250A" },
-    { 0x104c, 0xac1d, "Texas Instruments PCI1251A", "TI 1251A" },
-    { 0x104c, 0xac1f, "Texas Instruments PCI1251B", "TI 1251B" },
-    { 0x104c, 0xac50, "Texas Instruments PCI1410", "TI 1410" },
-    { 0x104c, 0xac51, "Texas Instruments PCI1420", "TI 1420" },
-    { 0x104c, 0xac1b, "Texas Instruments PCI1450", "TI 1450" },
-    { 0x104c, 0xac52, "Texas Instruments PCI1451", "TI 1451" },
-    { 0x104c, 0xac41, "Texas Instruments PCI4410", "TI 4410" },
-    { 0x104c, 0xac40, "Texas Instruments PCI4450", "TI 4450" },
-    { 0x104c, 0xac42, "Texas Instruments PCI4451", "TI 4451" },
-    { 0x1217, 0x6729, "O2 Micro 6729", "O2Micro OZ6729" },
-    { 0x1217, 0x673a, "O2 Micro 6730", "O2Micro OZ6730" },
-    { 0x1217, 0x6832, "O2 Micro 6832/6833", "O2Micro OZ6832/OZ6833" },
-    { 0x1217, 0x6836, "O2 Micro 6836/6860", "O2Micro OZ6836/OZ6860" },
-    { 0x1217, 0x6872, "O2 Micro 6812", "O2Micro OZ6812" },
-    { 0x1217, 0x6925, "O2 Micro 6922", "O2Micro OZ6922 CardBus Controller" },
-    { 0x1217, 0x6933, "O2 Micro 6933", "O2Micro OZ6933 Cardbus Controller" },
-    { 0x1217, 0x6972, "O2 Micro 6912", "O2Micro OZ6912 CardBus Controller" },
-    { 0x1179, 0x0603, "Toshiba ToPIC95-A", "Toshiba ToPIC95-A" },
-    { 0x1179, 0x060a, "Toshiba ToPIC95-B", "Toshiba ToPIC95-B" },
-    { 0x1179, 0x060f, "Toshiba ToPIC97", "Toshiba ToPIC97" },
-    { 0x1179, 0x0617, "Toshiba ToPIC100", "Toshiba ToPIC100" },
-    { 0x119b, 0x1221, "Omega Micro 82C092G", "Omega Micro 82C092G" },
-    { 0x8086, 0x1221, "Intel 82092AA", "Intel 82092AA_0" },
-    { 0x8086, 0x1222, "Intel 82092AA", "Intel 82092AA_1" }   //mdk-stage1// added from pcitable
-};
-#define PCI_COUNT (sizeof(pci_id)/sizeof(pci_id_t))
-
-char * driver = NULL;
-
-static int pci_probe(void)
-{
-    char s[256], *name = NULL;
-    u_int device, vendor, i;
-    FILE *f;
-    
-//mdk-stage1//     if (!module)
-    log_message("PCMCIA: probing PCI bus..");
-
-    if ((f = fopen("/proc/bus/pci/devices", "r")) != NULL) {
-	while (fgets(s, 256, f) != NULL) {
-	    u_int n = strtoul(s+5, NULL, 16);
-	    vendor = (n >> 16); device = (n & 0xffff);
-	    for (i = 0; i < PCI_COUNT; i++)
-		if ((vendor == pci_id[i].vendor) &&
-		    (device == pci_id[i].device)) break;
-	    if (i < PCI_COUNT) {
-		name = pci_id[i].name;
-		if (pci_id[i].vendor == 0x1013 && pci_id[i].device == 0x1100)
-			driver = "i82365";
-		else
-			driver = "yenta_socket";
-		break;
-	    }
-	}
-    }
-//mdk-stage1// else if ((f = fopen("/proc/pci", "r")) != NULL) {
-//mdk-stage1// 	while (fgets(s, 256, f) != NULL) {
-//mdk-stage1// 	    t = strstr(s, "Device id=");
-//mdk-stage1// 	    if (t) {
-//mdk-stage1// 		device = strtoul(t+10, NULL, 16);
-//mdk-stage1// 		t = strstr(s, "Vendor id=");
-//mdk-stage1// 		vendor = strtoul(t+10, NULL, 16);
-//mdk-stage1// 		for (i = 0; i < PCI_COUNT; i++)
-//mdk-stage1// 		    if ((vendor == pci_id[i].vendor) &&
-//mdk-stage1// 			(device == pci_id[i].device)) break;
-//mdk-stage1// 	    } else
-//mdk-stage1// 		for (i = 0; i < PCI_COUNT; i++)
-//mdk-stage1// 		    if (strstr(s, pci_id[i].tag) != NULL) break;
-//mdk-stage1// 	    if (i != PCI_COUNT) {
-//mdk-stage1// 		name = pci_id[i].name;
-//mdk-stage1// 		break;
-//mdk-stage1// 	    } else {
-//mdk-stage1// 		t = strstr(s, "CardBus bridge");
-//mdk-stage1// 		if (t != NULL) {
-//mdk-stage1// 		    name = t + 16;
-//mdk-stage1// 		    t = strchr(s, '(');
-//mdk-stage1// 		    t[-1] = '\0';
-//mdk-stage1// 		    break;
-//mdk-stage1// 		}
-//mdk-stage1// 	    }
-//mdk-stage1// 	}
-//mdk-stage1//     }
-    fclose(f);
-
-    if (name) {
-//mdk-stage1// 	if (module)
-//mdk-stage1// 	    printf("i82365\n");
-//mdk-stage1// 	else
-	    log_message("\t%s found, 2 sockets.", name);
-	return 0;
-    } else {
-//mdk-stage1// 	if (!module)
-	    log_message("\tnot found.");
-	return -ENODEV;
-    }
-}
-//mdk-stage1// #endif
-
-/*====================================================================*/
-
-//mdk-stage1// #ifdef CONFIG_ISA
-//mdk-stage1// 
-//mdk-stage1// #ifdef __GLIBC__
-#include <sys/io.h>
-//mdk-stage1// #else
-//mdk-stage1// #include <asm/io.h>
-//mdk-stage1// #endif
-typedef u_short ioaddr_t;
-
-#include "i82365.h"
-#include "cirrus.h"
-#include "vg468.h"
-
-static ioaddr_t i365_base = 0x03e0;
-
-static u_char i365_get(u_short sock, u_short reg)
-{
-    u_char val = I365_REG(sock, reg);
-    outb(val, i365_base); val = inb(i365_base+1);
-    return val;
-}
-
-static void i365_set(u_short sock, u_short reg, u_char data)
-{
-    u_char val = I365_REG(sock, reg);
-    outb(val, i365_base); outb(data, i365_base+1);
-}
-
-static void i365_bset(u_short sock, u_short reg, u_char mask)
-{
-    u_char d = i365_get(sock, reg);
-    d |= mask;
-    i365_set(sock, reg, d);
-}
-
-static void i365_bclr(u_short sock, u_short reg, u_char mask)
-{
-    u_char d = i365_get(sock, reg);
-    d &= ~mask;
-    i365_set(sock, reg, d);
-}
-
-int i365_probe(void)
-{
-    int val, sock, done;
-    char *name = "i82365sl";
-
-//mdk-stage1// if (!module)
-    log_message("PCMCIA: probing for Intel PCIC (ISA)..");
-//mdk-stage1//     if (verbose) printf("\n");
-    
-    sock = done = 0;
-    if (ioperm(i365_base, 4, 1)) {
-               log_perror("PCMCIA: ioperm");
-               return -1;
-    }
-    ioperm(0x80, 1, 1);
-    for (; sock < 2; sock++) {
-	val = i365_get(sock, I365_IDENT);
-//mdk-stage1//	if (verbose)
-//mdk-stage1//	    printf("  ident(%d)=%#2.2x", sock, val); 
-	switch (val) {
-	case 0x82:
-	    name = "i82365sl A step";
-	    break;
-	case 0x83:
-	    name = "i82365sl B step";
-	    break;
-	case 0x84:
-	    name = "VLSI 82C146";
-	    break;
-	case 0x88: case 0x89: case 0x8a:
-	    name = "IBM Clone";
-	    break;
-	case 0x8b: case 0x8c:
-	    break;
-	default:
-	    done = 1;
-	}
-	if (done) break;
-    }
-
-//mdk-stage1//    if (verbose) printf("\n  ");
-    if (sock == 0) {
-//mdk-stage1//	if (!module)
-	log_message("\tnot found.");
-	return -ENODEV;
-    }
-
-    if ((sock == 2) && (strcmp(name, "VLSI 82C146") == 0))
-	name = "i82365sl DF";
-
-    /* Check for Vadem chips */
-    outb(0x0e, i365_base);
-    outb(0x37, i365_base);
-    i365_bset(0, VG468_MISC, VG468_MISC_VADEMREV);
-    val = i365_get(0, I365_IDENT);
-    if (val & I365_IDENT_VADEM) {
-	if ((val & 7) < 4)
-	    name = "Vadem VG-468";
-	else
-	    name = "Vadem VG-469";
-	i365_bclr(0, VG468_MISC, VG468_MISC_VADEMREV);
-    }
-    
-    /* Check for Cirrus CL-PD67xx chips */
-    i365_set(0, PD67_CHIP_INFO, 0);
-    val = i365_get(0, PD67_CHIP_INFO);
-    if ((val & PD67_INFO_CHIP_ID) == PD67_INFO_CHIP_ID) {
-	val = i365_get(0, PD67_CHIP_INFO);
-	if ((val & PD67_INFO_CHIP_ID) == 0) {
-	    if (val & PD67_INFO_SLOTS)
-		name = "Cirrus CL-PD672x";
-	    else {
-		name = "Cirrus CL-PD6710";
-		sock = 1;
-	    }
-	    i365_set(0, PD67_EXT_INDEX, 0xe5);
-	    if (i365_get(0, PD67_EXT_INDEX) != 0xe5)
-		name = "VIA VT83C469";
-	}
-    }
-
-//mdk-stage1//    if (module)
-//mdk-stage1//	printf("i82365\n");
-//mdk-stage1//    else
-	printf("\t%s found, %d sockets.\n", name, sock);
-    return 0;
-    
-} /* i365_probe */
-
-//mdk-stage1//#endif /* CONFIG_ISA */
-
-/*====================================================================*/
-
-//mdk-stage1//#ifdef CONFIG_ISA
-
-#include "tcic.h"
-
-//mdk-stage1//static ioaddr_t tcic_base = TCIC_BASE;
-
-static u_char tcic_getb(ioaddr_t base, u_char reg)
-{
-    u_char val = inb(base+reg);
-    return val;
-}
-
-static void tcic_setb(ioaddr_t base, u_char reg, u_char data)
-{
-    outb(data, base+reg);
-}
-
-static u_short tcic_getw(ioaddr_t base, u_char reg)
-{
-    u_short val = inw(base+reg);
-    return val;
-}
-
-static void tcic_setw(ioaddr_t base, u_char reg, u_short data)
-{
-    outw(data, base+reg);
-}
-
-static u_short tcic_aux_getw(ioaddr_t base, u_short reg)
-{
-    u_char mode = (tcic_getb(base, TCIC_MODE) & TCIC_MODE_PGMMASK) | reg;
-    tcic_setb(base, TCIC_MODE, mode);
-    return tcic_getw(base, TCIC_AUX);
-}
-
-static void tcic_aux_setw(ioaddr_t base, u_short reg, u_short data)
-{
-    u_char mode = (tcic_getb(base, TCIC_MODE) & TCIC_MODE_PGMMASK) | reg;
-    tcic_setb(base, TCIC_MODE, mode);
-    tcic_setw(base, TCIC_AUX, data);
-}
-
-static int get_tcic_id(ioaddr_t base)
-{
-    u_short id;
-    tcic_aux_setw(base, TCIC_AUX_TEST, TCIC_TEST_DIAG);
-    id = tcic_aux_getw(base, TCIC_AUX_ILOCK);
-    id = (id & TCIC_ILOCKTEST_ID_MASK) >> TCIC_ILOCKTEST_ID_SH;
-    tcic_aux_setw(base, TCIC_AUX_TEST, 0);
-    return id;
-}
-
-int tcic_probe_at(ioaddr_t base)
-{
-    int i;
-    u_short old;
-    
-    /* Anything there?? */
-    for (i = 0; i < 0x10; i += 2)
-	if (tcic_getw(base, i) == 0xffff)
-	    return -1;
-
-//mdk-stage1//    if (!module)
-    log_message("\tat %#3.3x: ", base); fflush(stdout);
-
-    /* Try to reset the chip */
-    tcic_setw(base, TCIC_SCTRL, TCIC_SCTRL_RESET);
-    tcic_setw(base, TCIC_SCTRL, 0);
-    
-    /* Can we set the addr register? */
-    old = tcic_getw(base, TCIC_ADDR);
-    tcic_setw(base, TCIC_ADDR, 0);
-    if (tcic_getw(base, TCIC_ADDR) != 0) {
-	tcic_setw(base, TCIC_ADDR, old);
-	return -2;
-    }
-    
-    tcic_setw(base, TCIC_ADDR, 0xc3a5);
-    if (tcic_getw(base, TCIC_ADDR) != 0xc3a5)
-	return -3;
-
-    return 2;
-}
-
-int tcic_probe(void)
-{
-    int sock, id;
-
-//mdk-stage1//     if (!module)
-    log_message("PCMCIA: probing for Databook TCIC-2 (ISA).."); fflush(stdout);
-    
-    if (ioperm(TCIC_BASE, 16, 1)) {
-	    log_perror("PCMCIA: ioperm");
-	    return -1;
-    }
-    ioperm(0x80, 1, 1);
-    sock = tcic_probe_at(TCIC_BASE);
-    
-    if (sock <= 0) {
-//mdk-stage1//	if (!module)
-	    log_message("\tnot found.");
-	return -ENODEV;
-    }
-
-//mdk-stage1//    if (module)
-//mdk-stage1//	printf("tcic\n");
-//mdk-stage1//    else {
-	id = get_tcic_id(TCIC_BASE);
-	switch (id) {
-	case TCIC_ID_DB86082:
-	    log_message("DB86082"); break;
-	case TCIC_ID_DB86082A:
-	    log_message("DB86082A"); break;
-	case TCIC_ID_DB86084:
-	    log_message("DB86084"); break;
-	case TCIC_ID_DB86084A:
-	    log_message("DB86084A"); break;
-	case TCIC_ID_DB86072:
-	    log_message("DB86072"); break;
-	case TCIC_ID_DB86184:
-	    log_message("DB86184"); break;
-	case TCIC_ID_DB86082B:
-	    log_message("DB86082B"); break;
-	default:
-	    log_message("Unknown TCIC-2 ID 0x%02x", id);
-	}
-	log_message(" found at %#6x, %d sockets.", TCIC_BASE, sock);
-//mdk-stage1//     }
-    return 0;
-    
-} /* tcic_probe */
-
-//mdk-stage1// #endif /* CONFIG_ISA */
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// int main(int argc, char *argv[])
-//mdk-stage1// {
-//mdk-stage1//     int optch, errflg;
-//mdk-stage1//     extern char *optarg;
-//mdk-stage1//     int verbose = 0, module = 0;
-//mdk-stage1//     
-//mdk-stage1//     errflg = 0;
-//mdk-stage1//     while ((optch = getopt(argc, argv, "t:vxm")) != -1) {
-//mdk-stage1// 	switch (optch) {
-//mdk-stage1// #ifdef CONFIG_ISA
-//mdk-stage1// 	case 't':
-//mdk-stage1// 	    tcic_base = strtoul(optarg, NULL, 0); break;
-//mdk-stage1// #endif
-//mdk-stage1// 	case 'v':
-//mdk-stage1// 	    verbose = 1; break;
-//mdk-stage1// 	case 'm':
-//mdk-stage1// 	    module = 1; break;
-//mdk-stage1// 	default:
-//mdk-stage1// 	    errflg = 1; break;
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1//     if (errflg || (optind < argc)) {
-//mdk-stage1// 	fprintf(stderr, "usage: %s [-t tcic_base] [-v] [-m]\n", argv[0]);
-//mdk-stage1// 	exit(EXIT_FAILURE);
-//mdk-stage1//     }
-//mdk-stage1// 
-//mdk-stage1// #ifdef CONFIG_PCI
-//mdk-stage1//     if (pci_probe(verbose, module) == 0)
-//mdk-stage1// 	exit(EXIT_SUCCESS);
-//mdk-stage1// #endif
-//mdk-stage1// #ifdef CONFIG_ISA
-//mdk-stage1//     if (i365_probe(verbose, module) == 0)
-//mdk-stage1// 	exit(EXIT_SUCCESS);
-//mdk-stage1//     else if (tcic_probe(verbose, module, tcic_base) == 0)
-//mdk-stage1// 	exit(EXIT_SUCCESS);
-//mdk-stage1// #endif
-//mdk-stage1//     exit(EXIT_FAILURE);
-//mdk-stage1//     return 0;
-//mdk-stage1// }
-
-
-char * pcmcia_probe(void)
-{
-	if (!pci_probe())
-		return driver;
-	else if (!i365_probe())
-		return "i82365";
-	else if (!tcic_probe())
-		return "tcic";
-	else
-		return NULL;
-}
diff --git a/mdk-stage1/pcmcia_/tcic.h b/mdk-stage1/pcmcia_/tcic.h
deleted file mode 100644
index cad193885..000000000
--- a/mdk-stage1/pcmcia_/tcic.h
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * tcic.h 1.15 2001/08/24 12:15:34
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_TCIC_H
-#define _LINUX_TCIC_H
-
-#define TCIC_BASE		0x240
-
-/* offsets of registers from TCIC_BASE */
-#define TCIC_DATA		0x00
-#define TCIC_ADDR		0x02
-#define TCIC_SCTRL		0x06
-#define TCIC_SSTAT		0x07
-#define TCIC_MODE		0x08
-#define TCIC_PWR		0x09
-#define TCIC_EDC		0x0A
-#define TCIC_ICSR		0x0C
-#define TCIC_IENA		0x0D
-#define TCIC_AUX		0x0E
-
-#define TCIC_SS_SHFT		12
-#define TCIC_SS_MASK		0x7000
-
-/* Flags for TCIC_ADDR */
-#define TCIC_ADR2_REG		0x8000
-#define TCIC_ADR2_INDREG	0x0800
-
-#define TCIC_ADDR_REG		0x80000000
-#define TCIC_ADDR_SS_SHFT	(TCIC_SS_SHFT+16)
-#define TCIC_ADDR_SS_MASK	(TCIC_SS_MASK<<16)
-#define TCIC_ADDR_INDREG	0x08000000
-#define TCIC_ADDR_IO		0x04000000
-#define TCIC_ADDR_MASK		0x03ffffff
-
-/* Flags for TCIC_SCTRL */
-#define TCIC_SCTRL_ENA		0x01
-#define TCIC_SCTRL_INCMODE	0x18
-#define TCIC_SCTRL_INCMODE_HOLD	0x00
-#define TCIC_SCTRL_INCMODE_WORD	0x08
-#define TCIC_SCTRL_INCMODE_REG	0x10
-#define TCIC_SCTRL_INCMODE_AUTO	0x18
-#define TCIC_SCTRL_EDCSUM	0x20
-#define TCIC_SCTRL_RESET	0x80
-
-/* Flags for TCIC_SSTAT */
-#define TCIC_SSTAT_6US		0x01
-#define TCIC_SSTAT_10US		0x02
-#define TCIC_SSTAT_PROGTIME	0x04
-#define TCIC_SSTAT_LBAT1	0x08
-#define TCIC_SSTAT_LBAT2	0x10
-#define TCIC_SSTAT_RDY		0x20	/* Inverted */
-#define TCIC_SSTAT_WP		0x40
-#define TCIC_SSTAT_CD		0x80	/* Card detect */
-
-/* Flags for TCIC_MODE */
-#define TCIC_MODE_PGMMASK	0x1f
-#define TCIC_MODE_NORMAL	0x00
-#define TCIC_MODE_PGMWR		0x01
-#define TCIC_MODE_PGMRD		0x02
-#define TCIC_MODE_PGMCE		0x04
-#define TCIC_MODE_PGMDBW	0x08
-#define TCIC_MODE_PGMWORD	0x10
-#define TCIC_MODE_AUXSEL_MASK	0xe0
-
-/* Registers accessed through TCIC_AUX, by setting TCIC_MODE */
-#define TCIC_AUX_TCTL		(0<<5)
-#define TCIC_AUX_PCTL		(1<<5)
-#define TCIC_AUX_WCTL		(2<<5)
-#define TCIC_AUX_EXTERN		(3<<5)
-#define TCIC_AUX_PDATA		(4<<5)
-#define TCIC_AUX_SYSCFG		(5<<5)
-#define TCIC_AUX_ILOCK		(6<<5)
-#define TCIC_AUX_TEST		(7<<5)
-
-/* Flags for TCIC_PWR */
-#define TCIC_PWR_VCC(sock)	(0x01<<(sock))
-#define TCIC_PWR_VCC_MASK	0x03
-#define TCIC_PWR_VPP(sock)	(0x08<<(sock))
-#define TCIC_PWR_VPP_MASK	0x18
-#define TCIC_PWR_CLIMENA	0x40
-#define TCIC_PWR_CLIMSTAT	0x80
-
-/* Flags for TCIC_ICSR */
-#define TCIC_ICSR_CLEAR		0x01
-#define TCIC_ICSR_SET		0x02
-#define TCIC_ICSR_JAM		(TCIC_ICSR_CLEAR|TCIC_ICSR_SET)
-#define TCIC_ICSR_STOPCPU	0x04
-#define TCIC_ICSR_ILOCK		0x08
-#define TCIC_ICSR_PROGTIME	0x10
-#define TCIC_ICSR_ERR		0x20
-#define TCIC_ICSR_CDCHG		0x40
-#define TCIC_ICSR_IOCHK		0x80
-
-/* Flags for TCIC_IENA */
-#define TCIC_IENA_CFG_MASK	0x03
-#define TCIC_IENA_CFG_OFF	0x00	/* disabled */
-#define TCIC_IENA_CFG_OD	0x01	/* active low, open drain */
-#define TCIC_IENA_CFG_LOW	0x02	/* active low, totem pole */
-#define TCIC_IENA_CFG_HIGH	0x03	/* active high, totem pole */
-#define TCIC_IENA_ILOCK		0x08
-#define TCIC_IENA_PROGTIME	0x10
-#define TCIC_IENA_ERR		0x20	/* overcurrent or iochk */
-#define TCIC_IENA_CDCHG		0x40
-
-/* Flags for TCIC_AUX_WCTL */
-#define TCIC_WAIT_COUNT_MASK	0x001f
-#define TCIC_WAIT_ASYNC		0x0020
-#define TCIC_WAIT_SENSE		0x0040
-#define TCIC_WAIT_SRC		0x0080
-#define TCIC_WCTL_WR		0x0100
-#define TCIC_WCTL_RD		0x0200
-#define TCIC_WCTL_CE		0x0400
-#define TCIC_WCTL_LLBAT1	0x0800
-#define TCIC_WCTL_LLBAT2	0x1000
-#define TCIC_WCTL_LRDY		0x2000
-#define TCIC_WCTL_LWP		0x4000
-#define TCIC_WCTL_LCD		0x8000
-
-/* Flags for TCIC_AUX_SYSCFG */
-#define TCIC_SYSCFG_IRQ_MASK	0x000f
-#define TCIC_SYSCFG_MCSFULL	0x0010
-#define TCIC_SYSCFG_IO1723	0x0020
-#define TCIC_SYSCFG_MCSXB	0x0040
-#define TCIC_SYSCFG_ICSXB	0x0080
-#define TCIC_SYSCFG_NOPDN	0x0100
-#define TCIC_SYSCFG_MPSEL_SHFT	9
-#define TCIC_SYSCFG_MPSEL_MASK	0x0e00
-#define TCIC_SYSCFG_MPSENSE	0x2000
-#define TCIC_SYSCFG_AUTOBUSY	0x4000
-#define TCIC_SYSCFG_ACC		0x8000
-
-#define TCIC_ILOCK_OUT		0x01
-#define TCIC_ILOCK_SENSE	0x02
-#define TCIC_ILOCK_CRESET	0x04
-#define TCIC_ILOCK_CRESENA	0x08
-#define TCIC_ILOCK_CWAIT	0x10
-#define TCIC_ILOCK_CWAITSNS	0x20
-#define TCIC_ILOCK_HOLD_MASK	0xc0
-#define TCIC_ILOCK_HOLD_CCLK	0xc0
-
-#define TCIC_ILOCKTEST_ID_SH	8
-#define TCIC_ILOCKTEST_ID_MASK	0x7f00
-#define TCIC_ILOCKTEST_MCIC_1	0x8000
-
-#define TCIC_ID_DB86082		0x02
-#define TCIC_ID_DB86082A	0x03
-#define TCIC_ID_DB86084		0x04
-#define TCIC_ID_DB86084A	0x08
-#define TCIC_ID_DB86072		0x15
-#define TCIC_ID_DB86184		0x14
-#define TCIC_ID_DB86082B	0x17
-
-#define TCIC_TEST_DIAG		0x8000
-
-/*
- * Indirectly addressed registers
- */
-
-#define TCIC_SCF1(sock)	((sock)<<3)
-#define TCIC_SCF2(sock) (((sock)<<3)+2)
-
-/* Flags for SCF1 */
-#define TCIC_SCF1_IRQ_MASK	0x000f
-#define TCIC_SCF1_IRQ_OFF	0x0000
-#define TCIC_SCF1_IRQOC		0x0010
-#define TCIC_SCF1_PCVT		0x0020
-#define TCIC_SCF1_IRDY		0x0040
-#define TCIC_SCF1_ATA		0x0080
-#define TCIC_SCF1_DMA_SHIFT	8
-#define TCIC_SCF1_DMA_MASK	0x0700
-#define TCIC_SCF1_DMA_OFF	0
-#define TCIC_SCF1_DREQ2		2
-#define TCIC_SCF1_IOSTS		0x0800
-#define TCIC_SCF1_SPKR		0x1000
-#define TCIC_SCF1_FINPACK	0x2000
-#define TCIC_SCF1_DELWR		0x4000
-#define TCIC_SCF1_HD7IDE	0x8000
-
-/* Flags for SCF2 */
-#define TCIC_SCF2_RI		0x0001
-#define TCIC_SCF2_IDBR		0x0002
-#define TCIC_SCF2_MDBR		0x0004
-#define TCIC_SCF2_MLBAT1	0x0008
-#define TCIC_SCF2_MLBAT2	0x0010
-#define TCIC_SCF2_MRDY		0x0020
-#define TCIC_SCF2_MWP		0x0040
-#define TCIC_SCF2_MCD		0x0080
-#define TCIC_SCF2_MALL		0x00f8
-
-/* Indirect addresses for memory window registers */
-#define TCIC_MWIN(sock,map)	(0x100+(((map)+((sock)<<2))<<3))
-#define TCIC_MBASE_X		2
-#define TCIC_MMAP_X		4
-#define TCIC_MCTL_X		6
-
-#define TCIC_MBASE_4K_BIT	0x4000
-#define TCIC_MBASE_HA_SHFT	12
-#define TCIC_MBASE_HA_MASK	0x0fff
-
-#define TCIC_MMAP_REG		0x8000
-#define TCIC_MMAP_CA_SHFT	12
-#define TCIC_MMAP_CA_MASK	0x3fff
-
-#define TCIC_MCTL_WSCNT_MASK	0x001f
-#define TCIC_MCTL_WCLK		0x0020
-#define TCIC_MCTL_WCLK_CCLK	0x0000
-#define TCIC_MCTL_WCLK_BCLK	0x0020
-#define TCIC_MCTL_QUIET		0x0040
-#define TCIC_MCTL_WP		0x0080
-#define TCIC_MCTL_ACC		0x0100
-#define TCIC_MCTL_KE		0x0200
-#define TCIC_MCTL_EDC		0x0400
-#define TCIC_MCTL_B8		0x0800
-#define TCIC_MCTL_SS_SHFT	TCIC_SS_SHFT
-#define TCIC_MCTL_SS_MASK	TCIC_SS_MASK
-#define TCIC_MCTL_ENA		0x8000
-
-/* Indirect addresses for I/O window registers */
-#define TCIC_IWIN(sock,map)	(0x200+(((map)+((sock)<<1))<<2))
-#define TCIC_IBASE_X		0
-#define TCIC_ICTL_X		2
-
-#define TCIC_ICTL_WSCNT_MASK	TCIC_MCTL_WSCNT_MASK
-#define TCIC_ICTL_QUIET		TCIC_MCTL_QUIET
-#define TCIC_ICTL_1K		0x0080
-#define TCIC_ICTL_PASS16	0x0100
-#define TCIC_ICTL_ACC		TCIC_MCTL_ACC
-#define TCIC_ICTL_TINY		0x0200
-#define TCIC_ICTL_B16		0x0400
-#define TCIC_ICTL_B8		TCIC_MCTL_B8
-#define TCIC_ICTL_BW_MASK	(TCIC_ICTL_B16|TCIC_ICTL_B8)
-#define TCIC_ICTL_BW_DYN	0
-#define TCIC_ICTL_BW_8		TCIC_ICTL_B8
-#define TCIC_ICTL_BW_16		TCIC_ICTL_B16
-#define TCIC_ICTL_BW_ATA	(TCIC_ICTL_B16|TCIC_ICTL_B8)
-#define TCIC_ICTL_SS_SHFT	TCIC_SS_SHFT
-#define TCIC_ICTL_SS_MASK	TCIC_SS_MASK
-#define TCIC_ICTL_ENA		TCIC_MCTL_ENA
-
-#endif /* _LINUX_TCIC_H */
diff --git a/mdk-stage1/pcmcia_/version.h b/mdk-stage1/pcmcia_/version.h
deleted file mode 100644
index 3be8f28bc..000000000
--- a/mdk-stage1/pcmcia_/version.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* version.h 1.101 2001/08/09 12:29:14 (David Hinds) */
-
-#define CS_RELEASE "3.1.29"
-#define CS_RELEASE_CODE 0x311d
diff --git a/mdk-stage1/pcmcia_/vg468.h b/mdk-stage1/pcmcia_/vg468.h
deleted file mode 100644
index 93dc00b37..000000000
--- a/mdk-stage1/pcmcia_/vg468.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * vg468.h 1.14 2001/08/24 12:15:34
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_VG468_H
-#define _LINUX_VG468_H
-
-/* Special bit in I365_IDENT used for Vadem chip detection */
-#define I365_IDENT_VADEM	0x08
-
-/* Special definitions in I365_POWER */
-#define VG468_VPP2_MASK		0x0c
-#define VG468_VPP2_5V		0x04
-#define VG468_VPP2_12V		0x08
-
-/* Unique Vadem registers */
-#define VG469_VSENSE		0x1f	/* Card voltage sense */
-#define VG469_VSELECT		0x2f	/* Card voltage select */
-#define VG468_CTL		0x38	/* Control register */
-#define VG468_TIMER		0x39	/* Timer control */
-#define VG468_MISC		0x3a	/* Miscellaneous */
-#define VG468_GPIO_CFG		0x3b	/* GPIO configuration */
-#define VG469_EXT_MODE		0x3c	/* Extended mode register */
-#define VG468_SELECT		0x3d	/* Programmable chip select */
-#define VG468_SELECT_CFG	0x3e	/* Chip select configuration */
-#define VG468_ATA		0x3f	/* ATA control */
-
-/* Flags for VG469_VSENSE */
-#define VG469_VSENSE_A_VS1	0x01
-#define VG469_VSENSE_A_VS2	0x02
-#define VG469_VSENSE_B_VS1	0x04
-#define VG469_VSENSE_B_VS2	0x08
-
-/* Flags for VG469_VSELECT */
-#define VG469_VSEL_VCC		0x03
-#define VG469_VSEL_5V		0x00
-#define VG469_VSEL_3V		0x03
-#define VG469_VSEL_MAX		0x0c
-#define VG469_VSEL_EXT_STAT	0x10
-#define VG469_VSEL_EXT_BUS	0x20
-#define VG469_VSEL_MIXED	0x40
-#define VG469_VSEL_ISA		0x80
-
-/* Flags for VG468_CTL */
-#define VG468_CTL_SLOW		0x01	/* 600ns memory timing */
-#define VG468_CTL_ASYNC		0x02	/* Asynchronous bus clocking */
-#define VG468_CTL_TSSI		0x08	/* Tri-state some outputs */
-#define VG468_CTL_DELAY		0x10	/* Card detect debounce */
-#define VG468_CTL_INPACK	0x20	/* Obey INPACK signal? */
-#define VG468_CTL_POLARITY	0x40	/* VCCEN polarity */
-#define VG468_CTL_COMPAT	0x80	/* Compatibility stuff */
-
-#define VG469_CTL_WS_COMPAT	0x04	/* Wait state compatibility */
-#define VG469_CTL_STRETCH	0x10	/* LED stretch */
-
-/* Flags for VG468_TIMER */
-#define VG468_TIMER_ZEROPWR	0x10	/* Zero power control */
-#define VG468_TIMER_SIGEN	0x20	/* Power up */
-#define VG468_TIMER_STATUS	0x40	/* Activity timer status */
-#define VG468_TIMER_RES		0x80	/* Timer resolution */
-#define VG468_TIMER_MASK	0x0f	/* Activity timer timeout */
-
-/* Flags for VG468_MISC */
-#define VG468_MISC_GPIO		0x04	/* General-purpose IO */
-#define VG468_MISC_DMAWSB	0x08	/* DMA wait state control */
-#define VG469_MISC_LEDENA	0x10	/* LED enable */
-#define VG468_MISC_VADEMREV	0x40	/* Vadem revision control */
-#define VG468_MISC_UNLOCK	0x80	/* Unique register lock */
-
-/* Flags for VG469_EXT_MODE_A */
-#define VG469_MODE_VPPST	0x03	/* Vpp steering control */
-#define VG469_MODE_INT_SENSE	0x04	/* Internal voltage sense */
-#define VG469_MODE_CABLE	0x08
-#define VG469_MODE_COMPAT	0x10	/* i82365sl B or DF step */
-#define VG469_MODE_TEST		0x20
-#define VG469_MODE_RIO		0x40	/* Steer RIO to INTR? */
-
-/* Flags for VG469_EXT_MODE_B */
-#define VG469_MODE_B_3V		0x01	/* 3.3v for socket B */
-
-/* Data structure for tracking vendor-specific state */
-typedef struct vg46x_state_t {
-    u_char		ctl;		/* VG468_CTL */
-    u_char		ema;		/* VG468_EXT_MODE_A */
-} vg46x_state_t;
-
-#endif /* _LINUX_VG468_H */
diff --git a/mdk-stage1/pcmcia_/yacc_config.c b/mdk-stage1/pcmcia_/yacc_config.c
deleted file mode 100644
index 79ec16eb5..000000000
--- a/mdk-stage1/pcmcia_/yacc_config.c
+++ /dev/null
@@ -1,1015 +0,0 @@
-#define YYBYACC 1
-#define YYMAJOR 1
-#define YYMINOR 9
-#define yyclearin (yychar=(-1))
-#define yyerrok (yyerrflag=0)
-#define YYRECOVERING (yyerrflag!=0)
-#define YYPREFIX "yy"
-#line 2 "yacc_config.y"
-/*
- * yacc_config.y 1.53 2001/08/24 12:21:34
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-    
-#include <stdlib.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <string.h>
-#include <syslog.h>
-#include <sys/types.h>
-
-#include <pcmcia_/cs_types.h>
-#include <pcmcia_/cs.h>
-#include <pcmcia_/cistpl.h>
-#include <pcmcia_/ds.h>
-    
-#include "cardmgr.h"
-
-/* If bison: generate nicer error messages */ 
-#define YYERROR_VERBOSE 1
- 
-/* from lex_config, for nice error messages */
-extern char *current_file;
-extern int current_lineno;
-
-void yyerror(char *msg, ...);
-
-static int add_binding(card_info_t *card, char *name, int fn);
-static int add_module(device_info_t *card, char *name);
-
-#line 65 "yacc_config.y"
-typedef union {
-    char *str;
-    u_long num;
-    struct device_info_t *device;
-    struct card_info_t *card;
-    struct mtd_ident_t *mtd;
-    struct adjust_list_t *adjust;
-} YYSTYPE;
-#line 77 "y.tab.c"
-#define DEVICE 257
-#define CARD 258
-#define ANONYMOUS 259
-#define TUPLE 260
-#define MANFID 261
-#define VERSION 262
-#define FUNCTION 263
-#define PCI 264
-#define BIND 265
-#define CIS 266
-#define TO 267
-#define NEEDS_MTD 268
-#define MODULE 269
-#define OPTS 270
-#define CLASS 271
-#define REGION 272
-#define JEDEC 273
-#define DTYPE 274
-#define DEFAULT 275
-#define MTD 276
-#define INCLUDE 277
-#define EXCLUDE 278
-#define RESERVE 279
-#define IRQ_NO 280
-#define PORT 281
-#define MEMORY 282
-#define STRING 283
-#define NUMBER 284
-#define YYERRCODE 256
-short yylhs[] = {                                        -1,
-    0,    0,    0,    0,    0,    0,    0,    0,    1,    1,
-    1,    1,    2,    2,    2,    3,    3,    3,    3,    7,
-    7,    7,    7,    7,    7,    7,    7,    7,    8,    9,
-   10,   11,   12,   12,   13,   15,   14,   14,   14,   14,
-    4,   21,    5,    5,    5,    6,   16,   16,   16,   16,
-   18,   17,   19,   20,   20,   22,
-};
-short yylen[] = {                                         2,
-    0,    2,    2,    2,    2,    2,    2,    2,    2,    2,
-    2,    3,    2,    4,    4,    2,    1,    1,    1,    2,
-    1,    1,    1,    1,    1,    1,    1,    1,    2,    7,
-    5,    5,    3,    3,    3,    3,    3,    5,    3,    5,
-    2,    4,    3,    3,    3,    3,    2,    1,    1,    1,
-    3,    4,    2,    3,    3,    4,
-};
-short yydefred[] = {                                      1,
-    0,    8,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,   17,    0,   19,    0,   21,   22,   23,   24,
-    0,   26,    0,   28,    0,   49,   48,   50,    0,    6,
-    7,   16,   20,    0,   47,    0,    0,    0,    0,    9,
-   10,   11,    0,   41,    0,    0,    0,    0,   29,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-   53,    0,    0,    0,    0,   13,    0,    0,   12,   43,
-   46,   44,   45,    0,    0,   33,   35,    0,    0,   36,
-   34,    0,    0,   51,   54,   55,   42,   56,    0,    0,
-    0,    0,    0,    0,    0,   52,   14,   15,    0,   31,
-   32,   38,   40,    0,   30,
-};
-short yydgoto[] = {                                       1,
-   11,   40,   12,   13,   14,   15,   16,   17,   18,   19,
-   20,   21,   22,   23,   24,   25,   26,   27,   28,   29,
-   30,   31,
-};
-short yysindex[] = {                                      0,
- -250,    0, -279, -278, -274, -265, -259, -242, -242, -242,
-  -10, -248,    0,  -44,    0, -249,    0,    0,    0,    0,
-   -9,    0,   -3,    0, -243,    0,    0,    0, -233,    0,
-    0,    0,    0, -228,    0, -227, -240, -238, -237,    0,
-    0,    0, -242,    0, -235, -232, -231, -230,    0, -234,
- -229, -226, -225, -224, -222, -221, -220, -219, -218, -217,
-    0, -215, -213, -212, -211,    0,    9,   11,    0,    0,
-    0,    0,    0,   14,   21,    0,    0,   30, -192,    0,
-    0, -191, -207,    0,    0,    0,    0,    0, -206, -205,
- -204, -203, -202, -201, -200,    0,    0,    0,   41,    0,
-    0,    0,    0, -197,    0,
-};
-short yyrindex[] = {                                      0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-  107,  149,    0,   90,    0,  124,    0,    0,    0,    0,
-   49,    0,   73,    0,    0,    0,    0,    0,  141,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    1,    0,
-    0,   25,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,
-};
-short yygindex[] = {                                      0,
-    0,   -7,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,
-};
-#define YYTABLESIZE 428
-short yytable[] = {                                      48,
-   37,   41,   42,   32,   33,    2,    3,    4,   34,   49,
-   50,   51,   52,   53,   54,   55,   56,   35,    5,   44,
-   45,    6,   46,   36,   39,    7,    8,    9,   10,   59,
-   60,   61,   62,   43,   57,   69,   63,   37,   38,   39,
-   58,   64,   65,   66,   37,   67,   68,   70,   25,   74,
-   71,   72,   73,   89,   75,   90,   76,   91,   77,   78,
-   79,   80,   81,   82,   92,   83,   84,   85,   39,   86,
-   87,   88,   27,   93,   94,   95,   96,   97,   98,   99,
-  100,  101,  102,  103,  104,  105,    0,    0,    0,   18,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    2,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    5,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    4,    0,    0,    0,    0,    0,    0,    0,    3,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,   47,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,   37,   37,   37,   37,
-   37,   37,   37,   37,   37,   37,   37,    0,    0,   37,
-    0,    0,   37,    0,    0,    0,   37,   37,   37,   37,
-   39,   39,   39,   39,   39,   39,   39,   39,   39,   39,
-   39,    0,    0,   39,    0,    0,   39,    0,    0,    0,
-   39,   39,   39,   39,   25,   25,   25,   25,   25,   25,
-   25,   25,   25,   25,   25,    0,    0,   25,    0,    0,
-   25,    0,    0,    0,   25,   25,   25,   25,   27,   27,
-   27,   27,   27,   27,   27,   27,   27,   27,   27,    0,
-    0,   27,    0,    0,   27,   18,   18,   18,   27,   27,
-   27,   27,    0,    0,    0,    0,    0,   18,   18,    0,
-   18,   18,    2,    2,    2,   18,   18,   18,   18,    0,
-    0,    0,    0,    0,    0,    2,    0,    0,    2,    5,
-    5,    5,    2,    2,    2,    2,    0,    0,    0,    0,
-    0,    0,    5,    0,    0,    5,    4,    4,    4,    5,
-    5,    5,    5,    0,    3,    3,    3,    0,    0,    4,
-    0,    0,    4,    0,    0,    0,    4,    4,    4,    4,
-    3,    0,    0,    0,    3,    3,    3,    3,
-};
-short yycheck[] = {                                      44,
-    0,    9,   10,  283,  283,  256,  257,  258,  283,  259,
-  260,  261,  262,  263,  264,  265,  266,  283,  269,  268,
-  269,  272,  271,  283,    0,  276,  277,  278,  279,  273,
-  274,  275,  276,   44,   44,   43,  270,  280,  281,  282,
-   44,  270,  270,  284,   44,  284,  284,  283,    0,  284,
-  283,  283,  283,   45,  284,   45,  283,   44,  284,  284,
-  283,  283,  283,  283,   44,  284,  284,  283,   44,  283,
-  283,  283,    0,   44,  267,  267,  284,  284,  284,  284,
-  284,  284,  284,  284,   44,  283,   -1,   -1,   -1,    0,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,    0,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,    0,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-    0,   -1,   -1,   -1,   -1,   -1,   -1,   -1,    0,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,  270,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,  256,  257,  258,  259,
-  260,  261,  262,  263,  264,  265,  266,   -1,   -1,  269,
-   -1,   -1,  272,   -1,   -1,   -1,  276,  277,  278,  279,
-  256,  257,  258,  259,  260,  261,  262,  263,  264,  265,
-  266,   -1,   -1,  269,   -1,   -1,  272,   -1,   -1,   -1,
-  276,  277,  278,  279,  256,  257,  258,  259,  260,  261,
-  262,  263,  264,  265,  266,   -1,   -1,  269,   -1,   -1,
-  272,   -1,   -1,   -1,  276,  277,  278,  279,  256,  257,
-  258,  259,  260,  261,  262,  263,  264,  265,  266,   -1,
-   -1,  269,   -1,   -1,  272,  256,  257,  258,  276,  277,
-  278,  279,   -1,   -1,   -1,   -1,   -1,  268,  269,   -1,
-  271,  272,  256,  257,  258,  276,  277,  278,  279,   -1,
-   -1,   -1,   -1,   -1,   -1,  269,   -1,   -1,  272,  256,
-  257,  258,  276,  277,  278,  279,   -1,   -1,   -1,   -1,
-   -1,   -1,  269,   -1,   -1,  272,  256,  257,  258,  276,
-  277,  278,  279,   -1,  256,  257,  258,   -1,   -1,  269,
-   -1,   -1,  272,   -1,   -1,   -1,  276,  277,  278,  279,
-  272,   -1,   -1,   -1,  276,  277,  278,  279,
-};
-#define YYFINAL 1
-#ifndef YYDEBUG
-#define YYDEBUG 0
-#endif
-#define YYMAXTOKEN 284
-#if YYDEBUG
-char *yyname[] = {
-"end-of-file",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,"','","'-'",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"DEVICE","CARD",
-"ANONYMOUS","TUPLE","MANFID","VERSION","FUNCTION","PCI","BIND","CIS","TO",
-"NEEDS_MTD","MODULE","OPTS","CLASS","REGION","JEDEC","DTYPE","DEFAULT","MTD",
-"INCLUDE","EXCLUDE","RESERVE","IRQ_NO","PORT","MEMORY","STRING","NUMBER",
-};
-char *yyrule[] = {
-"$accept : list",
-"list :",
-"list : list adjust",
-"list : list device",
-"list : list mtd",
-"list : list card",
-"list : list opts",
-"list : list mtd_opts",
-"list : list error",
-"adjust : INCLUDE resource",
-"adjust : EXCLUDE resource",
-"adjust : RESERVE resource",
-"adjust : adjust ',' resource",
-"resource : IRQ_NO NUMBER",
-"resource : PORT NUMBER '-' NUMBER",
-"resource : MEMORY NUMBER '-' NUMBER",
-"device : DEVICE STRING",
-"device : needs_mtd",
-"device : module",
-"device : class",
-"card : CARD STRING",
-"card : anonymous",
-"card : tuple",
-"card : manfid",
-"card : pci",
-"card : version",
-"card : function",
-"card : bind",
-"card : cis",
-"anonymous : card ANONYMOUS",
-"tuple : card TUPLE NUMBER ',' NUMBER ',' STRING",
-"manfid : card MANFID NUMBER ',' NUMBER",
-"pci : card PCI NUMBER ',' NUMBER",
-"version : card VERSION STRING",
-"version : version ',' STRING",
-"function : card FUNCTION NUMBER",
-"cis : card CIS STRING",
-"bind : card BIND STRING",
-"bind : card BIND STRING TO NUMBER",
-"bind : bind ',' STRING",
-"bind : bind ',' STRING TO NUMBER",
-"needs_mtd : device NEEDS_MTD",
-"opts : MODULE STRING OPTS STRING",
-"module : device MODULE STRING",
-"module : module OPTS STRING",
-"module : module ',' STRING",
-"class : device CLASS STRING",
-"region : REGION STRING",
-"region : dtype",
-"region : jedec",
-"region : default",
-"dtype : region DTYPE NUMBER",
-"jedec : region JEDEC NUMBER NUMBER",
-"default : region DEFAULT",
-"mtd : region MTD STRING",
-"mtd : mtd OPTS STRING",
-"mtd_opts : MTD STRING OPTS STRING",
-};
-#endif
-#ifdef YYSTACKSIZE
-#undef YYMAXDEPTH
-#define YYMAXDEPTH YYSTACKSIZE
-#else
-#ifdef YYMAXDEPTH
-#define YYSTACKSIZE YYMAXDEPTH
-#else
-#define YYSTACKSIZE 500
-#define YYMAXDEPTH 500
-#endif
-#endif
-int yydebug;
-int yynerrs;
-int yyerrflag;
-int yychar;
-short *yyssp;
-YYSTYPE *yyvsp;
-YYSTYPE yyval;
-YYSTYPE yylval;
-short yyss[YYSTACKSIZE];
-YYSTYPE yyvs[YYSTACKSIZE];
-#define yystacksize YYSTACKSIZE
-#line 468 "yacc_config.y"
-void yyerror(char *msg, ...)
-{
-     va_list ap;
-     char str[256];
-
-     va_start(ap, msg);
-     sprintf(str, "config error, file '%s' line %d: ",
-	     current_file, current_lineno);
-     vsprintf(str+strlen(str), msg, ap);
-#if YYDEBUG
-     fprintf(stderr, "%s\n", str);
-#else
-     syslog(LOG_ERR, "%s", str);
-#endif
-     va_end(ap);
-}
-
-static int add_binding(card_info_t *card, char *name, int fn)
-{
-    device_info_t *dev = root_device;
-    if (card->bindings == MAX_BINDINGS) {
-	yyerror("too many bindings\n");
-	return -1;
-    }
-    for (; dev; dev = dev->next)
-	if (strcmp((char *)dev->dev_info, name) == 0) break;
-    if (dev == NULL) {
-	yyerror("unknown device: %s", name);
-	return -1;
-    }
-    card->device[card->bindings] = dev;
-    card->dev_fn[card->bindings] = fn;
-    card->bindings++;
-    free(name);
-    return 0;
-}
-
-static int add_module(device_info_t *dev, char *name)
-{
-    if (dev->modules == MAX_MODULES) {
-	yyerror("too many modules");
-	return -1;
-    }
-    dev->module[dev->modules] = name;
-    dev->opts[dev->modules] = NULL;
-    dev->modules++;
-    return 0;
-}
-
-#if YYDEBUG
-adjust_list_t *root_adjust = NULL;
-device_info_t *root_device = NULL;
-card_info_t *root_card = NULL, *blank_card = NULL, *root_func = NULL;
-mtd_ident_t *root_mtd = NULL, *default_mtd = NULL;
-
-void main(int argc, char *argv[])
-{
-    yydebug = 1;
-    if (argc > 1)
-	parse_configfile(argv[1]);
-}
-#endif
-#line 426 "y.tab.c"
-#define YYABORT goto yyabort
-#define YYREJECT goto yyabort
-#define YYACCEPT goto yyaccept
-#define YYERROR goto yyerrlab
-int yylex(void);
-int
-yyparse()
-{
-    register int yym, yyn, yystate;
-#if YYDEBUG
-    register char *yys;
-    extern char *getenv();
-
-    if (yys = getenv("YYDEBUG"))
-    {
-        yyn = *yys;
-        if (yyn >= '0' && yyn <= '9')
-            yydebug = yyn - '0';
-    }
-#endif
-
-    yynerrs = 0;
-    yyerrflag = 0;
-    yychar = (-1);
-
-    yyssp = yyss;
-    yyvsp = yyvs;
-    *yyssp = yystate = 0;
-
-yyloop:
-    if ((yyn = yydefred[yystate])) goto yyreduce;
-    if (yychar < 0)
-    {
-        if ((yychar = yylex()) < 0) yychar = 0;
-#if YYDEBUG
-        if (yydebug)
-        {
-            yys = 0;
-            if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
-            if (!yys) yys = "illegal-symbol";
-            printf("%sdebug: state %d, reading %d (%s)\n",
-                    YYPREFIX, yystate, yychar, yys);
-        }
-#endif
-    }
-    if ((yyn = yysindex[yystate]) && (yyn += yychar) >= 0 &&
-            yyn <= YYTABLESIZE && yycheck[yyn] == yychar)
-    {
-#if YYDEBUG
-        if (yydebug)
-            printf("%sdebug: state %d, shifting to state %d\n",
-                    YYPREFIX, yystate, yytable[yyn]);
-#endif
-        if (yyssp >= yyss + yystacksize - 1)
-        {
-            goto yyoverflow;
-        }
-        *++yyssp = yystate = yytable[yyn];
-        *++yyvsp = yylval;
-        yychar = (-1);
-        if (yyerrflag > 0)  --yyerrflag;
-        goto yyloop;
-    }
-    if ((yyn = yyrindex[yystate]) && (yyn += yychar) >= 0 &&
-            yyn <= YYTABLESIZE && yycheck[yyn] == yychar)
-    {
-        yyn = yytable[yyn];
-        goto yyreduce;
-    }
-    if (yyerrflag) goto yyinrecovery;
-    yyerror("syntax error");
-#ifdef lint
-    goto yyerrlab;
-#endif
-yyerrlab:
-    ++yynerrs;
-yyinrecovery:
-    if (yyerrflag < 3)
-    {
-        yyerrflag = 3;
-        for (;;)
-        {
-            if ((yyn = yysindex[*yyssp]) && (yyn += YYERRCODE) >= 0 &&
-                    yyn <= YYTABLESIZE && yycheck[yyn] == YYERRCODE)
-            {
-#if YYDEBUG
-                if (yydebug)
-                    printf("%sdebug: state %d, error recovery shifting\
- to state %d\n", YYPREFIX, *yyssp, yytable[yyn]);
-#endif
-                if (yyssp >= yyss + yystacksize - 1)
-                {
-                    goto yyoverflow;
-                }
-                *++yyssp = yystate = yytable[yyn];
-                *++yyvsp = yylval;
-                goto yyloop;
-            }
-            else
-            {
-#if YYDEBUG
-                if (yydebug)
-                    printf("%sdebug: error recovery discarding state %d\n",
-                            YYPREFIX, *yyssp);
-#endif
-                if (yyssp <= yyss) goto yyabort;
-                --yyssp;
-                --yyvsp;
-            }
-        }
-    }
-    else
-    {
-        if (yychar == 0) goto yyabort;
-#if YYDEBUG
-        if (yydebug)
-        {
-            yys = 0;
-            if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
-            if (!yys) yys = "illegal-symbol";
-            printf("%sdebug: state %d, error recovery discards token %d (%s)\n",
-                    YYPREFIX, yystate, yychar, yys);
-        }
-#endif
-        yychar = (-1);
-        goto yyloop;
-    }
-yyreduce:
-#if YYDEBUG
-    if (yydebug)
-        printf("%sdebug: state %d, reducing by rule %d (%s)\n",
-                YYPREFIX, yystate, yyn, yyrule[yyn]);
-#endif
-    yym = yylen[yyn];
-    yyval = yyvsp[1-yym];
-    switch (yyn)
-    {
-case 2:
-#line 84 "yacc_config.y"
-{
-		    adjust_list_t **tail = &root_adjust;
-		    while (*tail != NULL) tail = &(*tail)->next;
-		    *tail = yyvsp[0].adjust;
-		}
-break;
-case 3:
-#line 90 "yacc_config.y"
-{
-		    yyvsp[0].device->next = root_device;
-		    root_device = yyvsp[0].device;
-		}
-break;
-case 4:
-#line 95 "yacc_config.y"
-{
-		    if (yyvsp[0].mtd->mtd_type == 0) {
-			yyerror("no ID method for this card");
-			YYERROR;
-		    }
-		    if (yyvsp[0].mtd->module == NULL) {
-			yyerror("no MTD module specified");
-			YYERROR;
-		    }
-		    yyvsp[0].mtd->next = root_mtd;
-		    root_mtd = yyvsp[0].mtd;
-		}
-break;
-case 5:
-#line 108 "yacc_config.y"
-{
-		    if (yyvsp[0].card->ident_type == 0) {
-			yyerror("no ID method for this card");
-			YYERROR;
-		    }
-		    if (yyvsp[0].card->bindings == 0) {
-			yyerror("no function bindings");
-			YYERROR;
-		    }
-		    if (yyvsp[0].card->ident_type == FUNC_IDENT) {
-			yyvsp[0].card->next = root_func;
-			root_func = yyvsp[0].card;
-		    } else {
-			yyvsp[0].card->next = root_card;
-			root_card = yyvsp[0].card;
-		    }
-		}
-break;
-case 9:
-#line 131 "yacc_config.y"
-{
-		    yyvsp[0].adjust->adj.Action = ADD_MANAGED_RESOURCE;
-		    yyval.adjust = yyvsp[0].adjust;
-		}
-break;
-case 10:
-#line 136 "yacc_config.y"
-{
-		    yyvsp[0].adjust->adj.Action = REMOVE_MANAGED_RESOURCE;
-		    yyval.adjust = yyvsp[0].adjust;
-		}
-break;
-case 11:
-#line 141 "yacc_config.y"
-{
-		    yyvsp[0].adjust->adj.Action = ADD_MANAGED_RESOURCE;
-		    yyvsp[0].adjust->adj.Attributes |= RES_RESERVED;
-		    yyval.adjust = yyvsp[0].adjust;
-		}
-break;
-case 12:
-#line 147 "yacc_config.y"
-{
-		    yyvsp[0].adjust->adj.Action = yyvsp[-2].adjust->adj.Action;
-		    yyvsp[0].adjust->adj.Attributes = yyvsp[-2].adjust->adj.Attributes;
-		    yyvsp[0].adjust->next = yyvsp[-2].adjust;
-		    yyval.adjust = yyvsp[0].adjust;
-		}
-break;
-case 13:
-#line 156 "yacc_config.y"
-{
-		    yyval.adjust = calloc(sizeof(adjust_list_t), 1);
-		    yyval.adjust->adj.Resource = RES_IRQ;
-		    yyval.adjust->adj.resource.irq.IRQ = yyvsp[0].num;
-		}
-break;
-case 14:
-#line 162 "yacc_config.y"
-{
-		    if ((yyvsp[0].num < yyvsp[-2].num) || (yyvsp[0].num > 0xffff)) {
-			yyerror("invalid port range");
-			YYERROR;
-		    }
-		    yyval.adjust = calloc(sizeof(adjust_list_t), 1);
-		    yyval.adjust->adj.Resource = RES_IO_RANGE;
-		    yyval.adjust->adj.resource.io.BasePort = yyvsp[-2].num;
-		    yyval.adjust->adj.resource.io.NumPorts = yyvsp[0].num - yyvsp[-2].num + 1;
-		}
-break;
-case 15:
-#line 173 "yacc_config.y"
-{
-		    if (yyvsp[0].num < yyvsp[-2].num) {
-			yyerror("invalid address range");
-			YYERROR;
-		    }
-		    yyval.adjust = calloc(sizeof(adjust_list_t), 1);
-		    yyval.adjust->adj.Resource = RES_MEMORY_RANGE;
-		    yyval.adjust->adj.resource.memory.Base = yyvsp[-2].num;
-		    yyval.adjust->adj.resource.memory.Size = yyvsp[0].num - yyvsp[-2].num + 1;
-		}
-break;
-case 16:
-#line 186 "yacc_config.y"
-{
-		    yyval.device = calloc(sizeof(device_info_t), 1);
-		    yyval.device->refs = 1;
-		    strcpy(yyval.device->dev_info, yyvsp[0].str);
-		    free(yyvsp[0].str);
-		}
-break;
-case 20:
-#line 198 "yacc_config.y"
-{
-		    yyval.card = calloc(sizeof(card_info_t), 1);
-		    yyval.card->refs = 1;
-		    yyval.card->name = yyvsp[0].str;
-		}
-break;
-case 29:
-#line 214 "yacc_config.y"
-{
-		    if (yyvsp[-1].card->ident_type != 0) {
-			yyerror("ID method already defined");
-			YYERROR;
-		    }
-		    if (blank_card) {
-			yyerror("Anonymous card already defined");
-			YYERROR;
-		    }
-		    yyvsp[-1].card->ident_type = BLANK_IDENT;
-		    blank_card = yyvsp[-1].card;
-		}
-break;
-case 30:
-#line 229 "yacc_config.y"
-{
-		    if (yyvsp[-6].card->ident_type != 0) {
-			yyerror("ID method already defined");
-			YYERROR;
-		    }
-		    yyvsp[-6].card->ident_type = TUPLE_IDENT;
-		    yyvsp[-6].card->id.tuple.code = yyvsp[-4].num;
-		    yyvsp[-6].card->id.tuple.ofs = yyvsp[-2].num;
-		    yyvsp[-6].card->id.tuple.info = yyvsp[0].str;
-		}
-break;
-case 31:
-#line 242 "yacc_config.y"
-{
-		    if (yyvsp[-4].card->ident_type & EXCL_IDENT) {
-			yyerror("ID method already defined");
-			YYERROR;
-		    }
-		    yyvsp[-4].card->ident_type = MANFID_IDENT;
-		    yyvsp[-4].card->manfid.manf = yyvsp[-2].num;
-		    yyvsp[-4].card->manfid.card = yyvsp[0].num;
-		}
-break;
-case 32:
-#line 253 "yacc_config.y"
-{
-		    if (yyvsp[-4].card->ident_type != 0) {
-			yyerror("ID method already defined");
-			YYERROR;
-		    }
-		    yyvsp[-4].card->ident_type = PCI_IDENT;
-		    yyvsp[-4].card->manfid.manf = yyvsp[-2].num;
-		    yyvsp[-4].card->manfid.card = yyvsp[0].num;
-		}
-break;
-case 33:
-#line 264 "yacc_config.y"
-{
-		    if (yyvsp[-2].card->ident_type & EXCL_IDENT) {
-			yyerror("ID method already defined\n");
-			YYERROR;
-		    }
-		    yyvsp[-2].card->ident_type = VERS_1_IDENT;
-		    yyvsp[-2].card->id.vers.ns = 1;
-		    yyvsp[-2].card->id.vers.pi[0] = yyvsp[0].str;
-		}
-break;
-case 34:
-#line 274 "yacc_config.y"
-{
-		    if (yyvsp[-2].card->id.vers.ns == 4) {
-			yyerror("too many version strings");
-			YYERROR;
-		    }
-		    yyvsp[-2].card->id.vers.pi[yyvsp[-2].card->id.vers.ns] = yyvsp[0].str;
-		    yyvsp[-2].card->id.vers.ns++;
-		}
-break;
-case 35:
-#line 285 "yacc_config.y"
-{
-		    if (yyvsp[-2].card->ident_type != 0) {
-			yyerror("ID method already defined\n");
-			YYERROR;
-		    }
-		    yyvsp[-2].card->ident_type = FUNC_IDENT;
-		    yyvsp[-2].card->id.func.funcid = yyvsp[0].num;
-		}
-break;
-case 36:
-#line 296 "yacc_config.y"
-{ yyvsp[-2].card->cis_file = strdup(yyvsp[0].str); }
-break;
-case 37:
-#line 300 "yacc_config.y"
-{
-		    if (add_binding(yyvsp[-2].card, yyvsp[0].str, 0) != 0)
-			YYERROR;
-		}
-break;
-case 38:
-#line 305 "yacc_config.y"
-{
-		    if (add_binding(yyvsp[-4].card, yyvsp[-2].str, yyvsp[0].num) != 0)
-			YYERROR;
-		}
-break;
-case 39:
-#line 310 "yacc_config.y"
-{
-		    if (add_binding(yyvsp[-2].card, yyvsp[0].str, 0) != 0)
-			YYERROR;
-		}
-break;
-case 40:
-#line 315 "yacc_config.y"
-{
-		    if (add_binding(yyvsp[-4].card, yyvsp[-2].str, yyvsp[0].num) != 0)
-			YYERROR;
-		}
-break;
-case 41:
-#line 322 "yacc_config.y"
-{
-		    yyvsp[-1].device->needs_mtd = 1;
-		}
-break;
-case 42:
-#line 328 "yacc_config.y"
-{
-		    device_info_t *d;
-		    int i, found = 0;
-		    for (d = root_device; d; d = d->next) {
-			for (i = 0; i < d->modules; i++)
-			    if (strcmp(yyvsp[-2].str, d->module[i]) == 0) break;
-			if (i < d->modules) {
-			    if (d->opts[i])
-				free(d->opts[i]);
-			    d->opts[i] = strdup(yyvsp[0].str);
-			    found = 1;
-			}
-		    }
-		    free(yyvsp[-2].str); free(yyvsp[0].str);
-		    if (!found) {
-			yyerror("module name not found!");
-			YYERROR;
-		    }
-		}
-break;
-case 43:
-#line 350 "yacc_config.y"
-{
-		    if (add_module(yyvsp[-2].device, yyvsp[0].str) != 0)
-			YYERROR;
-		}
-break;
-case 44:
-#line 355 "yacc_config.y"
-{
-		    if (yyvsp[-2].device->opts[yyvsp[-2].device->modules-1] == NULL) {
-			yyvsp[-2].device->opts[yyvsp[-2].device->modules-1] = yyvsp[0].str;
-		    } else {
-			yyerror("too many options");
-			YYERROR;
-		    }
-		}
-break;
-case 45:
-#line 364 "yacc_config.y"
-{
-		    if (add_module(yyvsp[-2].device, yyvsp[0].str) != 0)
-			YYERROR;
-		}
-break;
-case 46:
-#line 371 "yacc_config.y"
-{
-		    if (yyvsp[-2].device->class != NULL) {
-			yyerror("extra class string");
-			YYERROR;
-		    }
-		    yyvsp[-2].device->class = yyvsp[0].str;
-		}
-break;
-case 47:
-#line 381 "yacc_config.y"
-{
-		    yyval.mtd = calloc(sizeof(mtd_ident_t), 1);
-		    yyval.mtd->refs = 1;
-		    yyval.mtd->name = yyvsp[0].str;
-		}
-break;
-case 51:
-#line 392 "yacc_config.y"
-{
-		    if (yyvsp[-2].mtd->mtd_type != 0) {
-			yyerror("ID method already defined");
-			YYERROR;
-		    }
-		    yyvsp[-2].mtd->mtd_type = DTYPE_MTD;
-		    yyvsp[-2].mtd->dtype = yyvsp[0].num;
-		}
-break;
-case 52:
-#line 403 "yacc_config.y"
-{
-		    if (yyvsp[-3].mtd->mtd_type != 0) {
-			yyerror("ID method already defined");
-			YYERROR;
-		    }
-		    yyvsp[-3].mtd->mtd_type = JEDEC_MTD;
-		    yyvsp[-3].mtd->jedec_mfr = yyvsp[-1].num;
-		    yyvsp[-3].mtd->jedec_info = yyvsp[0].num;
-		}
-break;
-case 53:
-#line 415 "yacc_config.y"
-{
-		    if (yyvsp[-1].mtd->mtd_type != 0) {
-			yyerror("ID method already defined");
-			YYERROR;
-		    }
-		    if (default_mtd) {
-			yyerror("Default MTD already defined");
-			YYERROR;
-		    }
-		    yyvsp[-1].mtd->mtd_type = DEFAULT_MTD;
-		    default_mtd = yyvsp[-1].mtd;
-		}
-break;
-case 54:
-#line 430 "yacc_config.y"
-{
-		    if (yyvsp[-2].mtd->module != NULL) {
-			yyerror("extra MTD entry");
-			YYERROR;
-		    }
-		    yyvsp[-2].mtd->module = yyvsp[0].str;
-		}
-break;
-case 55:
-#line 438 "yacc_config.y"
-{
-		    if (yyvsp[-2].mtd->opts == NULL) {
-			yyvsp[-2].mtd->opts = yyvsp[0].str;
-		    } else {
-			yyerror("too many options");
-			YYERROR;
-		    }
-		}
-break;
-case 56:
-#line 449 "yacc_config.y"
-{
-		    mtd_ident_t *m;
-		    int found = 0;
-		    for (m = root_mtd; m; m = m->next)
-			if (strcmp(yyvsp[-2].str, m->module) == 0) break;
-		    if (m) {
-			if (m->opts) free(m->opts);
-			m->opts = strdup(yyvsp[0].str);
-			found = 1;
-		    }
-		    free(yyvsp[-2].str); free(yyvsp[0].str);
-		    if (!found) {
-			yyerror("MTD name not found!");
-			YYERROR;
-		    }
-		}
-break;
-#line 966 "y.tab.c"
-    }
-    yyssp -= yym;
-    yystate = *yyssp;
-    yyvsp -= yym;
-    yym = yylhs[yyn];
-    if (yystate == 0 && yym == 0)
-    {
-#if YYDEBUG
-        if (yydebug)
-            printf("%sdebug: after reduction, shifting from state 0 to\
- state %d\n", YYPREFIX, YYFINAL);
-#endif
-        yystate = YYFINAL;
-        *++yyssp = YYFINAL;
-        *++yyvsp = yyval;
-        if (yychar < 0)
-        {
-            if ((yychar = yylex()) < 0) yychar = 0;
-#if YYDEBUG
-            if (yydebug)
-            {
-                yys = 0;
-                if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
-                if (!yys) yys = "illegal-symbol";
-                printf("%sdebug: state %d, reading %d (%s)\n",
-                        YYPREFIX, YYFINAL, yychar, yys);
-            }
-#endif
-        }
-        if (yychar == 0) goto yyaccept;
-        goto yyloop;
-    }
-    if ((yyn = yygindex[yym]) && (yyn += yystate) >= 0 &&
-            yyn <= YYTABLESIZE && yycheck[yyn] == yystate)
-        yystate = yytable[yyn];
-    else
-        yystate = yydgoto[yym];
-#if YYDEBUG
-    if (yydebug)
-        printf("%sdebug: after reduction, shifting from state %d \
-to state %d\n", YYPREFIX, *yyssp, yystate);
-#endif
-    if (yyssp >= yyss + yystacksize - 1)
-    {
-        goto yyoverflow;
-    }
-    *++yyssp = yystate;
-    *++yyvsp = yyval;
-    goto yyloop;
-yyoverflow:
-    yyerror("yacc stack overflow");
-yyabort:
-    return (1);
-yyaccept:
-    return (0);
-}
diff --git a/mdk-stage1/pcmcia_/yacc_config.h b/mdk-stage1/pcmcia_/yacc_config.h
deleted file mode 100644
index b4902c8e6..000000000
--- a/mdk-stage1/pcmcia_/yacc_config.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#define DEVICE 257
-#define CARD 258
-#define ANONYMOUS 259
-#define TUPLE 260
-#define MANFID 261
-#define VERSION 262
-#define FUNCTION 263
-#define PCI 264
-#define BIND 265
-#define CIS 266
-#define TO 267
-#define NEEDS_MTD 268
-#define MODULE 269
-#define OPTS 270
-#define CLASS 271
-#define REGION 272
-#define JEDEC 273
-#define DTYPE 274
-#define DEFAULT 275
-#define MTD 276
-#define INCLUDE 277
-#define EXCLUDE 278
-#define RESERVE 279
-#define IRQ_NO 280
-#define PORT 281
-#define MEMORY 282
-#define STRING 283
-#define NUMBER 284
-typedef union {
-    char *str;
-    u_long num;
-    struct device_info_t *device;
-    struct card_info_t *card;
-    struct mtd_ident_t *mtd;
-    struct adjust_list_t *adjust;
-} YYSTYPE;
-extern YYSTYPE yylval;
diff --git a/mdk-stage1/ppp/.cvsignore b/mdk-stage1/ppp/.cvsignore
deleted file mode 100644
index c258b925d..000000000
--- a/mdk-stage1/ppp/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-pppd-bin
diff --git a/mdk-stage1/ppp/Changes-2.3 b/mdk-stage1/ppp/Changes-2.3
deleted file mode 100644
index f5c954b4b..000000000
--- a/mdk-stage1/ppp/Changes-2.3
+++ /dev/null
@@ -1,441 +0,0 @@
-What was new in ppp-2.3.11.
-***************************
-
-* Support for Solaris 8 has been added, including support for
-  replumbing and IPV6.
-
-* The Solaris `snoop' utility should now work on ppp interfaces.
-
-* New hooks have been added - pap_logout_hook, ip_up_hook, and
-  ip_down_hook.
-
-* A new `passprompt' plugin is included, thanks to Alan Curry, which
-  makes it possible for pppd to call an external program to get the
-  PAP password to send to the peer.
-
-* The error messages for the situation where authentication is
-  required because the system has a default route have been improved.
-
-* There is a new connect_delay option which specifies how long pppd
-  should pause after the connect script finishes.  Previously this
-  delay was fixed at 1 second.  (This delay terminates as soon as pppd
-  sees a valid PPP frame from the peer.)
-
-* The `hide-password' option is now the default, and there is a new
-  `show-password' option to enable the printing of password strings in
-  the debug output.
-
-* A fairly complete list of the names of PPP protocols has been added
-  so that when pppd rejects a frame because its protocol is not
-  supported, it can print the name of the unsupported protocol.
-
-* Synchronous serial lines are supported under Linux 2.3.x.
-
-* The bug where pppd would not recognize a modem hangup under Linux
-  2.3.x kernels has been fixed.
-
-
-What was new in ppp-2.3.10.
-***************************
-
-* Pppd now supports `plugins', which are pieces of code (packaged as
-  shared libraries) which can be loaded into pppd at runtime and which
-  can affect its behaviour.  The intention is that plugins provide a
-  way for people to customize the behaviour of pppd for their own
-  needs without needing to change the base pppd source.  I have added
-  some hooks into pppd (places where pppd will call a function
-  pointer, if non-zero, to replace some of pppd's code) and I will be
-  receptive to suggestions about places to add more hooks.  Plugins
-  are supported under Linux and Solaris at present.
-
-* We have a new maintainer for the Solaris port, Adi Masputra of Sun
-  Microsystems, and he has updated the Solaris port so that it should
-  work on 64-bit machines under Solaris 7 and later.
-
-* Pppd now has an `allow-ip' option, which takes an argument which is
-  an IP address (or subnet) which peers are permitted to use without
-  authenticating themselves.  The argument takes the same form as each
-  element of the allowed IP address list in the secrets files.  The
-  allow-ip option is privileged and may be specified multiple times.
-  Using the allow-ip option should be cleaner than putting a line like
-  `"" * "" address' in /etc/ppp/pap-secrets.
-
-* Chat can now substitute environment variables into the script.  This
-  is enabled by the -E flag.  (Thanks to Andreas Arens for the patch.)
-
-* If the PAP username and password from the peer contains unprintable
-  characters, they will be translated to a printable form before
-  looking in the pap-secrets file.  Characters >= 0x80 are translated
-  to a M- form, and characters from 0 to 0x1f (and 0x7f as well) are
-  translated to a ^X form.  If this change causes you grief, let me
-  know what would be a better translation.  It appears that some peers
-  send nulls or other control characters in their usernames and
-  passwords.
-
-* Pppd has new `ktune' and `noktune' options, which enable/disable
-  it to change kernel settings as appropriate.  This is only
-  implemented under Linux, and requires the /proc filesystem to be
-  mounted.  Under Linux, with the ktune option, pppd will enable IP
-  forwarding in the kernel if the proxyarp option is used, and will
-  enable the dynamic IP address kernel option in demand mode if the
-  local IP address changes.
-
-* Pppd no longer requires a remote address to be specified for demand
-  dialling.  If none is specified, it will use a default value of
-  10.112.112.112+unit_number.  (It will not propose this default to
-  the peer.)
-
-* The default holdoff is now 0 if no connect script is given.
-
-* The IPV6 code from Tommi Komulainen, which I unfortunately only
-  partially merged in to ppp-2.3.9, has been fixed and updated.
-
-* The linux compilation glitches should be fixed now.
-
-
-What was new in ppp-2.3.9.
-**************************
-
-* Support for the new generic PPP layer under development for the
-  Linux kernel.
-
-* You can now place extra options to apply to specific users at the
-  end of the line with their password in the pap-secrets or
-  chap-secrets file, separated from the IP address(es) with a "--"
-  separator.  These options are parsed after the peer is authenticated
-  but before network protocol (IPCP, IPXCP) or CCP negotiation
-  commences.
-
-* Pppd will apply the holdoff period if the link was terminated by the
-  peer.  It doesn't apply it if the link was terminated because the
-  local pppd thought it was idle.
-
-* Synchronous support for Solaris has been added, thanks to John
-  Morrison, and for FreeBSD, thanks to Paul Fulghum.
-
-* IPV6 support has been merged in, from Tommi Komulainen.  At the
-  moment it only supports Linux and it is not tested by me.
-
-* The `nodefaultip' option can be used in demand mode to say that pppd
-  should not suggest its local IP address to the peer.
-
-* The `init' option has been added; this causes pppd to run a script
-  to initialize the serial device (e.g. by sending an init string to
-  the modem).  Unlike the connect option, this can be used in a
-  dial-in situation.  (Thanks to Tobias Ringstrom.)
-
-* There is a new `logfile' option to send log messages to a file as
-  well as syslog.
-
-* There is a new, privileged `linkname' option which sets a logical
-  name for the link.  Pppd will create a /var/run/ppp-<linkname>.pid
-  file containing its process ID.
-
-* There is a new `maxfail' option which specifies how many consecutive
-  failed connection attempts are permitted before pppd will exit.  The
-  default value is 10, and 0 means infinity. :-)
-
-* Sundry bugs fixed.
-
-
-What was new in ppp-2.3.8.
-**************************
-
-* The exit status of pppd will now indicate whether the link was
-  successfully established, or if not, what error was encountered.
-
-* Pppd has two new options: fdlog <n> will send log messages to file
-  descriptor <n> instead of standard output, and nofdlog will stop log
-  messages from being sent to any file descriptor (they will still be
-  sent to syslog).  Pppd now will not send log messages to a file
-  descriptor if the serial port is open on that file descriptor.
-
-* Pppd sets an environment variable called PPPLOGNAME for scripts that
-  it runs, indicating the login name of the user who invoked pppd.
-
-* Pppd sets environment variables CONNECT_TIME, BYTES_SENT and
-  BYTES_RCVD for the ip-down and auth-down scripts indicating the
-  statistics for the connection just terminated.  (CONNECT_TIME is in
-  seconds.)
-
-* If the user has the serial device open on standard input and
-  specifies a symbolic link to the serial device on the command line,
-  pppd will detect this and behave correctly (i.e. not detach from its
-  controlling terminal).  Furthermore, if the serial port is open for
-  reading and writing on standard input, pppd will assume that it is
-  locked by its invoker and not lock it itself.
-
-* Chat now has a feature where if a string to be sent begins with an
-  at sign (@), the rest of the string is taken as the name of a file
-  (regular file or named pipe), and the actual string to send is taken
-  from that file.
-
-* Support for FreeBSD-2.2.8 and 3.0 has been added, thanks to Paul
-  Fulghum.
-
-* The Tru64 (aka Digital Unix aka OSF/1) port has been updated.
-
-* The system panics on Solaris SMP systems related to PPP connections
-  being established and terminated should no longer occur.
-
-* Fixed quite a few bugs.
-
-
-What was new in ppp-2.3.7.
-**************************
-
-* Pppd can now automatically allocate itself a pseudo-tty to use as
-  the serial device.  This has made three new options possible:
-
-  - `pty script' will run `script' with its standard input and output
-    connected to the master side of the pty.  For example:
-	pppd pty 'ssh -t server.my.net pppd'
-    is a basic command for setting up a PPP link (tunnel) over ssh.
-    (In practice you may need to specify other options such as IP
-    addresses, etc.)
-
-  - `notty' tells pppd to communicate over its standard input and
-    output, which do not have to be a terminal device.
-
-  - `record filename' tells pppd to record all of the characters sent
-    and received over the serial device to a file called `filename'.
-    The data is recorded in a tagged format with timestamps, which can
-    be printed in a readable form with the pppdump program, which is
-    included in this distribution.
-
-* Pppd now logs the connect time and number of bytes sent and received
-  (at the level of the serial device) when the connection is
-  terminated.
-
-* If you use the updetach or nodetach option, pppd will print its
-  messages to standard output as well as logging them with syslog
-  (provided of course pppd isn't using its standard input or output as
-  its serial device).
-
-* There is a new `privgroup groupname' option (a privileged option).
-  If the user running pppd is in group `groupname', s/he can use
-  privileged options without restriction.
-
-* There is a new `receive-all' option, which causes pppd to accept all
-  control characters, even the ones that the peer should be escaping
-  (i.e. the receive asyncmap is 0).  This is useful with some buggy
-  peers.
-
-* The default asyncmap is now 0.
-
-* There is a new `sync' option, currently only implemented under
-  Linux, which allows pppd to run on synchronous HDLC devices.
-
-* If a value for the device name or for the connect, disconnect,
-  welcome or pty option is given in a privileged option file
-  (i.e. /etc/ppp/options or a file loaded with the `call' option), it
-  cannot be overridden by a non-privileged user.
-
-* Many bugs have been fixed, notably:
-  - signals are not blocked unnecessarily, as they were in 2.3.6.
-  - the usepeerdns option should work now.
-  - the SPEED environment variable for scripts is set correctly.
-  - the /etc/ppp/auth-down script is not run until auth-up completes.
-  - the device is opened as root if it is the device on standard
-    input.
-  - pppd doesn't die with the ioctl(PPPIOCSASYNCMAP) error under linux
-    if a hangup occurs at the wrong time.
-
-* Some error messages have been changed to be clearer (I hope :-)
-
-
-What was new in ppp-2.3.6.
-**************************
-
-* Pppd now opens the tty device as the user (rather than as root) if
-  the device name was given by the user, i.e. on the command line or
-  in the ~/.ppprc file.  If the device name was given in
-  /etc/ppp/options or in a file loaded with the `call' option, the
-  device is opened as root.
-
-* The default behaviour of pppd is now to let a peer which has not
-  authenticated itself (e.g. your ISP) use any IP address to which the
-  system does not already have a route.  (This is currently only
-  supported under Linux, Solaris and Digital Unix; on the other
-  systems, the peer must now authenticate itself unless the noauth
-  option is used.)
-
-* Added new option `usepeerdns', thanks to Nick Walker
-  <nickwalker@email.com>.  If the peer supplies DNS addresses, these
-  will be written to /etc/ppp/resolv.conf.  The ip-up script can then
-  be used to add these addresses to /etc/resolv.conf if desired (see
-  the ip-up.local.add and ip-down.local.add files in the scripts
-  directory).
-
-* The Solaris ppp driver should now work correctly on SMP systems.
-
-* Minor corrections so that the code can compile under Solaris 7,
-  and under Linux with glibc-2.1.
-
-* The Linux kernel driver has been restructured for improved
-  performance.
-
-* Pppd now won't start the ip-down script until the ip-up script has
-  finished.
-
-
-What was new in ppp-2.3.5.
-**************************
-
-* Minor corrections to the Digital UNIX and NetBSD ports.
-
-* A workaround to avoid tickling a bug in the `se' serial port driver
-on Sun PCI Ultra machines running Solaris.
-
-* Fixed a bug in the negotiation of the Microsoft WINS server address
-option.
-
-* Fixed a bug in the Linux port where it would fail for kernel
-versions above 2.1.99.
-
-
-What was new in ppp-2.3.4.
-**************************
-
-* The NeXT port has been updated, thanks to Steve Perkins.
-
-* ppp-2.3.4 compiles and works under Solaris 2.6, using either gcc or
-cc.
-
-* With the Solaris, SVR4 and SunOS ports, you can control the choice
-of C compiler, C compiler options, and installation directories by
-editing the svr4/Makedefs or sunos4/Makedefs file.
-
-* Until now, we have been using the number 24 to identify Deflate
-compression in the CCP negotiations, which was the number in the draft
-RFC describing Deflate.  The number actually assigned to Deflate is
-26.  The code has been changed to use 26, but to allow the use of 24
-for now for backwards compatibility.  (This can be disabled with the
-`nodeflatedraft' option to pppd.)
-
-* Fixed some bugs in the linux driver and deflate compressor which
-were causing compression problems, including corrupting long
-incompressible packets sometimes.
-
-* Fixes to the PAM and shadow password support in pppd, from Al
-Longyear and others.
-
-* Pppd now sets some environment variables for scripts it invokes
-(ip-up/down, auth-ip/down), giving information about the connection.
-The variables it sets are PEERNAME, IPLOCAL, IPREMOTE, UID, DEVICE,
-SPEED, and IFNAME.
-
-* Pppd now has an `updetach' option, which will cause it to detach
-from its controlling terminal once the link has come up (i.e. once it
-is available for IP traffic).
-
-
-What was new in ppp-2.3.3.
-**************************
-
-* Fixed compilation problems under SunOS.
-
-* Fixed a bug introduced into chat in 2.3.2, and compilation problems
-introduced into the MS-CHAP implementation in 2.3.2.
-
-* The linux kernel driver has been updated for recent 2.1-series
-kernel changes, and it now will ask kerneld to load compression
-modules when required, if the kernel is configured to support kerneld.
-
-* Pppd should now compile correctly under linux on systems with glibc.
-
-
-What was new in ppp-2.3.2.
-**************************
-
-* In 2.3.1, I made a change which was intended to make pppd able to
-detect loss of CD during or immediately after the connection script
-runs.  Unfortunately, this had the side-effect that the connection
-script wouldn't work at all on some systems.  This change has been
-reversed.
-
-* Fix compilation problems in the Linux kernel driver.
-
-
-What was new in ppp-2.3.1.
-**************************
-
-* Enhancements to chat, thanks to Francis Demierre.  Chat can now
-accept comments in the chat script file, and has new SAY, HANGUP,
-CLR_ABORT and CLR_REPORT keywords.
-
-* Fixed a bug which causes 2.3.0 to crash Solaris systems.
-
-* Bug-fixes and restructuring of the Linux kernel driver.
-
-* The holdoff behaviour of pppd has been changed slightly: now, if
-the link comes up for IP (or other network protocol) traffic, we
-consider that the link has been successfully established, and don't
-enforce the holdoff period after the link goes down.
-
-* Pppd should now correctly wait for CD (carrier detect) from the
-modem, even when the serial port initially had CLOCAL set, and it
-should also detect loss of CD during or immediately after the
-connection script runs.
-
-* Under linux, pppd will work with older 2.2.0* version kernel
-drivers, although demand-dialling is not supported with them.
-
-* Minor bugfixes for pppd.
-
-
-What was new in ppp-2.3.
-************************
-
-* Demand-dialling.  Pppd now has a mode where it will establish the
-network interface immediately when it starts, but not actually bring
-the link up until it sees some data to be sent.  Look for the demand
-option description in the pppd man page.  Demand-dialling is not
-supported under Ultrix or NeXTStep.
-
-* Idle timeout.  Pppd will optionally terminate the link if no data
-packets are sent or received within a certain time interval.
-
-* Pppd now runs the /etc/ppp/auth-up script, if it exists, when the
-peer successfully authenticates itself, and /etc/ppp/auth-down when
-the connection is subsequently terminated.  This can be useful for
-accounting purposes.
-
-* A new packet compression scheme, Deflate, has been implemented.
-This uses the same compression method as `gzip'.  This method is free
-of patent or copyright restrictions, and it achieves better
-compression than BSD-Compress.  It does consume more CPU cycles for
-compression than BSD-Compress, but this shouldn't be a problem for
-links running at 100kbit/s or less.
-
-* There is no code in this distribution which is covered by Brad
-Clements' restrictive copyright notice.  The STREAMS modules for SunOS
-and OSF/1 have been rewritten, based on the Solaris 2 modules, which
-were written from scratch without any Clements code.
-
-* Pppstats has been reworked to clean up the output format somewhat.
-It also has a new -d option which displays data rate in kbyte/s for
-those columns which would normally display bytes.
-
-* Pppd options beginning with - or + have been renamed, e.g. -ip
-became noip, +chap became require-chap, etc.  The old options are
-still accepted for compatibility but may be removed in future.
-
-* Pppd now has some options (such as the new `noauth' option) which
-can only be specified if it is being run by root, or in an
-"privileged" options file: /etc/ppp/options or an options file in the
-/etc/ppp/peers directory.  There is a new "call" option to read
-options from a file in /etc/ppp/peers, making it possible for non-root
-users to make unauthenticated connections, but only to certain trusted
-peers.  My intention is to make the `auth' option the default in a
-future release.
-
-* Several minor new features have been added to pppd, including the
-maxconnect and welcome options.  Pppd will now terminate the
-connection when there are no network control protocols running.  The
-allowed IP address(es) field in the secrets files can now specify
-subnets (with a notation like 123.45.67.89/24) and addresses which are
-not acceptable (put a ! on the front).
-
-* Numerous bugs have been fixed (no doubt some have been introduced :-)
-Thanks to those who reported bugs in ppp-2.2.
diff --git a/mdk-stage1/ppp/FAQ b/mdk-stage1/ppp/FAQ
deleted file mode 100644
index 96bc5c708..000000000
--- a/mdk-stage1/ppp/FAQ
+++ /dev/null
@@ -1,634 +0,0 @@
-This is a list of Frequently Asked Questions about using ppp-2.x and
-their answers.
-
-
-------------------------------------------------------------------------
-
-Q: Can you give me an example of how I might set up my machine to dial
-out to an ISP?
-
-A: Here's an example for dialling out to an ISP via a modem on
-/dev/tty02.  The modem uses hardware (CTS/RTS) flow control, and the
-serial port is run at 38400 baud.  The ISP assigns our IP address.
-
-To configure pppd for this connection, create a file under
-/etc/ppp/peers called (say) my-isp containing the following:
-
-tty02 crtscts 38400
-connect 'chat -v -f /etc/ppp/chat/my-isp'
-defaultroute
-
-The ppp connection is then initiated using the following command:
-
-pppd call my-isp
-
-Of course, if the directory containing pppd is not in your path, you
-will need to give the full pathname for pppd, for example,
-/usr/sbin/pppd.
-
-When you run this, pppd will use the chat program to dial the ISP and
-invoke its ppp service.  Chat will read the file specified with -f,
-namely /etc/ppp/chat/my-isp, to find a list of strings to expect to
-receive, and strings to send.  This file would contain something like
-this:
-
-ABORT "NO CARRIER"
-ABORT "NO DIALTONE"
-ABORT "ERROR"
-ABORT "NO ANSWER"
-ABORT "BUSY"
-ABORT "Username/Password Incorrect"
-"" "at"
-OK "at&d2&c1"
-OK "atdt2479381"
-"name:" "^Uusername"
-"word:" "\qpassword"
-"annex" "\q^Uppp"
-"Switching to PPP-ppp-Switching to PPP"
-
-You will need to change the details here.  The first string on each
-line is a string to expect to receive; the second is the string to
-send.  You can add or delete lines according to the dialog required to
-access your ISP's system.  This example is for a modem with a standard
-AT command set, dialling out to an Annex terminal server.  The \q
-toggles "quiet" mode; when quiet mode is on, the strings to be sent
-are replaced by ?????? in the log.  You may need to go through the
-dialog manually using kermit or tip first to determine what should go
-in the script.
-
-To terminate the link, run the following script, called (say)
-kill-ppp:
-
-#!/bin/sh
-unit=ppp${1-0}
-piddir=/var/run
-if [ -f $piddir/$unit.pid ]; then
-  kill -1 `cat $piddir/$unit.pid`
-fi
-
-On some systems (SunOS, Solaris, Ultrix), you will need to change
-/var/run to /etc/ppp.
-
-
-------------------------------------------------------------------------
-
-Q: Can you give me an example of how I could set up my office machine
-so I can dial in to it from home?
-
-A: Let's assume that the office machine is called "office" and is on a
-local ethernet subnet.  Call the home machine "home" and give it an IP
-address on the same subnet as "office".  We'll require both machines
-to authenticate themselves to each other.
-
-Set up the files on "office" as follows:
-
-/etc/ppp/options contains:
-
-auth		# require the peer to authenticate itself
-lock
-# other options can go here if desired
-
-/etc/ppp/chap-secrets contains:
-
-home	office	"beware the frub-jub"	home
-office	home	"bird, my son!%&*"	-
-
-Set up a modem on a serial port so that users can dial in to the
-modem and get a login prompt.
-
-On "home", set up the files as follows:
-
-/etc/ppp/options contains the same as on "office".
-
-/etc/ppp/chap-secrets contains:
-
-home	office	"beware the frub-jub"	-
-office	home	"bird, my son!%&*"	office
-
-Create a file called /etc/ppp/peers/office containing the following:
-
-tty02 crtscts 38400
-connect 'chat -v -f /etc/ppp/chat/office'
-defaultroute
-
-(You may need to change some of the details here.)
-
-Create the /etc/ppp/chat/office file containing the following:
-
-ABORT "NO CARRIER"
-ABORT "NO DIALTONE"
-ABORT "ERROR"
-ABORT "NO ANSWER"
-ABORT "BUSY"
-ABORT "ogin incorrect"
-"" "at"
-OK "at&d2&c1"
-OK "atdt2479381"
-"name:" "^Uusername"
-"word:" "\qpassword"
-"$" "\q^U/usr/sbin/pppd proxyarp"
-"~"
-
-You will need to change the details.  Note that the "$" in the
-second-last line is expecting the shell prompt after a successful
-login - you may need to change it to "%" or something else.
-
-You then initiate the connection (from home) with the command:
-
-pppd call office
-
-------------------------------------------------------------------------
-
-Q: When I try to establish a connection, the modem successfully dials
-the remote system, but then hangs up a few seconds later.  How do I
-find out what's going wrong?
-
-A: There are a number of possible problems here.  The first thing to
-do is to ensure that pppd's messages are visible.  Pppd uses the
-syslog facility to log messages which help to identify specific
-problems.  Messages from pppd have facility "daemon" and levels
-ranging from "debug" to "error".
-
-Usually it is useful to see messages of level "notice" or higher on
-the console.  To see these, find the line in /etc/syslog.conf which
-has /dev/console on the right-hand side, and add "daemon.notice" in
-the list on the left.  The line will end up looking something like
-this:
-
-*.err;kern.debug;auth.notice;mail.crit;daemon.notice	/dev/console
-
-Note that the whitespace is tabs, *not* spaces.
-
-If you are having problems, it may be useful to see messages of level
-"info" as well, in which case you would change "daemon.notice" to
-"daemon.info".
-
-In addition, it is useful to collect pppd's debugging output in a
-file - the debug option to pppd causes it to log the contents of all
-control packets sent and received in human-readable form.  To do this,
-add a line like this to /etc/syslog.conf:
-
-daemon,local2.debug		/etc/ppp/log
-
-and create an empty /etc/ppp/log file.
-
-When you change syslog.conf, you will need to send a HUP signal to
-syslogd to causes it to re-read syslog.conf.  You can do this with a
-command like this (as root):
-
-	kill -HUP `cat /etc/syslogd.pid`
-
-(On some systems, you need to use /var/run/syslog.pid instead of
-/etc/syslogd.pid.)
-
-After setting up syslog like this, you can use the -v flag to chat and
-the `debug' option to pppd to get more information.  Try initiating
-the connection again; when it fails, inspect /etc/ppp/log to see what
-happened and where the connection failed.
-
-
-------------------------------------------------------------------------
-
-Q: When I try to establish a connection, I get an error message saying
-"Serial link is not 8-bit clean".  Why?
-
-A: The most common cause is that your connection script hasn't
-successfully dialled out to the remote system and invoked ppp service
-there.  Instead, pppd is talking to something (a shell or login
-process on the remote machine, or maybe just the modem) which is only
-outputting 7-bit characters.
-
-This can also arise with a modem which uses an AT command set if the
-dial command is issued before pppd is invoked, rather than within a
-connect script started by pppd.  If the serial port is set to 7
-bits/character plus parity when the last AT command is issued, the
-modem serial port will be set to the same setting.
-
-Note that pppd *always* sets the local serial port to 8 bits per
-character, with no parity and 1 stop bit.  So you shouldn't need to
-issue an stty command before invoking pppd.
-
-
-------------------------------------------------------------------------
-
-Q: When I try to establish a connection, I get an error message saying
-"Serial line is looped back".  Why?
-
-A: Probably your connection script hasn't successfully dialled out to
-the remote system and invoked ppp service there.  Instead, pppd is
-talking to something which is just echoing back the characters it
-receives.  The -v option to chat can help you find out what's going
-on.  It can be useful to include "~" as the last expect string to
-chat, so chat won't return until it's seen the start of the first PPP
-frame from the remote system.
-
-Another possibility is that your phone connection has dropped for some
-obscure reason and the modem is echoing the characters it receives
-from your system.
-
-
-------------------------------------------------------------------------
-
-Q: I installed pppd successfully, but when I try to run it, I get a
-message saying something like "peer authentication required but no
-authentication files accessible".
-
-A: When pppd is used on a machine which already has a connection to
-the Internet (or to be more precise, one which has a default route in
-its routing table), it will require all peers to authenticate
-themselves.  The reason for this is that if you don't require
-authentication, you have a security hole, because the peer can
-basically choose any IP address it wants, even the IP address of some
-trusted host (for example, a host mentioned in some .rhosts file).
-
-On machines which don't have a default route, pppd does not require
-the peer to authenticate itself.  The reason is that such machines
-would mostly be using pppd to dial out to an ISP which will refuse to
-authenticate itself.  In that case the peer can use any IP address as
-long as the system does not already have a route to that address.
-For example, if you have a local ethernet network, the peer can't use
-an address on that network.  (In fact it could if it authenticated
-itself and it was permitted to use that address by the pap-secrets or
-chap-secrets file.)
-
-There are 3 ways around the problem:
-
-1. If possible, arrange for the peer to authenticate itself, and
-create the necessary secrets files (/etc/ppp/pap-secrets and/or
-/etc/ppp/chap-secrets).
-
-2. If the peer refuses to authenticate itself, and will always be
-using the same IP address, or one of a small set of IP addresses, you
-can create an entry in the /etc/ppp/pap-secrets file like this:
-
-  ""	  *	  ""	  his-ip.his-domain his-other-ip.other-domain
-
-(that is, using the empty string for the client name and password
-fields).  Of couse, you replace the 4th and following fields in the
-example above with the IP address(es) that the peer may use.  You can
-use either hostnames or numeric IP addresses.
-
-3. You can add the `noauth' option to the /etc/ppp/options file.
-Pppd will then not ask the peer to authenticate itself.  If you do
-this, I *strongly* recommend that you remove the set-uid bit from the
-permissions on the pppd executable, with a command like this:
-
-	chmod u-s /usr/sbin/pppd
-
-Then, an intruder could only use pppd maliciously if they had already
-become root, in which case they couldn't do any more damage using pppd
-than they could anyway.
-
-
-------------------------------------------------------------------------
-
-Q: What do I need to put in the secrets files?
-
-A: Three things:
-   - secrets (i.e. passwords) to use for authenticating this host to
-     other hosts (i.e., for proving our identity to others);
-   - secrets which other hosts can use for authenticating themselves
-     to us (i.e., so that they can prove their identity to us); and
-   - information about which IP addresses other hosts may use, once
-     they have authenticated themselves.
-
-There are two authentication files: /etc/ppp/pap-secrets, which
-contains secrets for use with PAP (the Password Authentication
-Protocol), and /etc/ppp/chap-secrets, which contains secrets for use
-with CHAP (the Challenge Handshake Authentication Protocol).  Both
-files have the same simple format, which is as follows:
-
-- The file contains a series of entries, each of which contains a
-secret for authenticating one machine to another.
-
-- Each entry is contained on a single logical line.  A logical line
-may be continued across several lines by placing a backslash (\) at
-the end of each line except the last.
-
-- Each entry has 3 or more fields, separated by whitespace (spaces
-and/or tabs).  These fields are, in order:
-	* The name of the machine that is authenticating itself
-	  (the "client").
-	* The name of the machine that is authenticating the client
-	  (the "server").
-	* The secret to be used for authenticating that client to that
-	  server.  If this field begins with the at-sign `@', the rest
-	  of the field is taken as the name of a file containing the
-	  actual secret.
-	* The 4th and any following fields list the IP address(es)
-	  that the client may use.
-
-- The file may contain comments, which begin with a `#' and continue
-to the end of the line.
-
-- Double quotes `"' should be used around a field if it contains
-characters with special significance, such as space, tab, `#', etc.
-
-- The backslash `\' may be used before characters with special
-significance (space, tab, `#', `\', etc.) to remove that significance.
-
-Some important points to note:
-
-* A machine can be *both* a "client" and a "server" for the purposes
-of authentication - this happens when both peers require the other to
-authenticate itself.  So A would authenticate itself to B, and B would
-also authenticate itself to A (possibly using a different
-authentication protocol).
-
-* If both the "client" and the "server" are running ppp-2.x, they need
-to have a similar entry in the appropriate secrets file; the first two
-fields are *not* swapped on the client, compared to the server.  So
-the client might have an entry like this:
-
-	ay	bee	"our little secret"	-
-
-and the corresponding entry on the server could look like this:
-
-	ay	bee	"our little secret"	123.45.67.89
-
-
-------------------------------------------------------------------------
-
-Q: Explain about PAP and CHAP?
-
-PAP stands for the Password Authentication Protocol.  With this
-protocol, the "client" (the machine that needs to authenticate itself)
-sends its name and a password, in clear text, to the "server".  The
-server returns a message indicating whether the name and password are
-valid.
-
-CHAP stands for the Challenge Handshake Authentication Protocol.  It
-is designed to address some of the deficiencies and vulnerabilities of
-PAP.  Like PAP, it is based on the client and server having a shared
-secret, but the secret is never passed in clear text over the link.
-Instead, the server sends a "challenge" - an arbitrary string of
-bytes, and the client must prove it knows the shared secret by
-generating a hash value from the challenge combined with the shared
-secret, and sending the hash value back to the server.  The server
-also generates the hash value and compares it with the value received
-from the client.
-
-At a practical level, CHAP can be slightly easier to configure than
-PAP because the server sends its name with the challenge.  Thus, when
-finding the appropriate secret in the secrets file, the client knows
-the server's name.  In contrast, with PAP, the client has to find its
-password (i.e. the shared secret) before it has received anything from
-the server.  Thus, it may be necessary to use the `remotename' option
-to pppd when using PAP authentication so that it can select the
-appropriate secret from /etc/ppp/pap-secrets.
-
-Microsoft also has a variant of CHAP which uses a different hashing
-arrangement from normal CHAP.  There is a client-side implementation
-of Microsoft's CHAP in ppp-2.3; see README.MSCHAP80.
-
-
-------------------------------------------------------------------------
-
-Q: When the modem hangs up, without the remote system having
-terminated the connection properly, pppd does not notice the hangup,
-but just keeps running.  How do I get pppd to notice the hangup and
-exit?
-
-A: Pppd detects modem hangup by looking for an end-of-file indication
-from the serial driver, which should be generated when the CD (carrier
-detect) signal on the serial port is deasserted.  For this to work:
-
-- The modem has to be set to assert CD when the connection is made and
-deassert it when the phone line hangs up.  Usually the AT&C1 modem
-command sets this mode.
-
-- The cable from the modem to the serial port must connect the CD
-signal (on pin 8).
-
-- Some serial drivers have a "software carrier detect" mode, which
-must be *disabled*.  The method of doing this varies between systems.
-Under SunOS, use the ttysoftcar command.  Under NetBSD, edit /etc/ttys
-to remove the "softcar" flag from the line for the serial port, and
-run ttyflags.
-
-
-------------------------------------------------------------------------
-
-Q: Why should I use PPP compression (BSD-Compress or Deflate) when my
-modem already does V.42 compression?  Won't it slow the CPU down a
-lot?
-
-A: Using PPP compression is preferable, especially when using modems
-over phone lines, for the following reasons:
-
-- The V.42 compression in the modem isn't very strong - it's an LZW
-technique (same as BSD-Compress) with a 10, 11 or 12 bit code size.
-With BSD-Compress you can use a code size of up to 15 bits and get
-much better compression, or you can use Deflate and get even better
-compression ratios.
-
-- I have found that enabling V.42 compression in my 14.4k modem
-increases the round-trip time for a character to be sent, echoed and
-returned by around 40ms, from 160ms to 200ms (with error correction
-enabled).  This is enough to make it feel less responsive on rlogin or
-telnet sessions.  Using PPP compression adds less than 5ms (small
-enough that I couldn't measure it reliably).  I admit my modem is a
-cheapie and other modems may well perform better.
-
-- While compression and decompression do require some CPU time, they
-reduce the amount of time spent in the serial driver to transmit a
-given amount of data.  Many machines require an interrupt for each
-character sent or received, and the interrupt handler can take a
-significant amount of CPU time.  So the increase in CPU load isn't as
-great as you might think.  My measurements indicate that a system with
-a 33MHz 486 CPU should be able to do Deflate compression for serial
-link speeds of up to 100kb/s or more.  It depends somewhat on the type
-of data, of course; for example, when compressing a string of nulls
-with Deflate, it's hard to get a high output data rate from the
-compressor, simply because it compresses strings of nulls so well that
-it has to eat a very large amount of input data to get each byte of
-output.
-
-
-------------------------------------------------------------------------
-
-Q: I get messages saying "Unsupported protocol (...) received".  What do
-these mean?
-
-A: If you only get one or two when pppd starts negotiating with the
-peer, they mean that the peer wanted to negotiate some PPP protocol
-that pppd doesn't understand.  This doesn't represent a problem, it
-simply means that there is some functionality that the peer supports
-that pppd doesn't, so that functionality can't be used.
-
-If you get them sporadically while the link is operating, or if the
-protocol numbers (in parentheses) don't correspond to any valid PPP
-protocol that the peer might be using, then the problem is probably
-that characters are getting corrupted on the receive side, or that
-extra characters are being inserted into the receive stream somehow.
-If this is happening, most packets that get corrupted should get
-discarded by the FCS (Frame Check Sequence, a 16-bit CRC) check, but a
-small number may get through.
-
-One possibility may be that you are receiving broadcast messages on
-the remote system which are being sent over your serial link.  Another
-possibility is that your modem is set for XON/XOFF (software) flow
-control and is inserting ^Q and ^S characters into the receive data
-stream.
-
-
-------------------------------------------------------------------------
-
-Q: I get messages saying "Protocol-Reject for unsupported protocol ...".
-What do these mean?
-
-A: This is the other side of the previous question.  If characters are
-getting corrupted on the way to the peer, or if your system is
-inserting extra bogus characters into the transmit data stream, the
-peer may send protocol-reject messages to you, resulting in the above
-message (since your pppd doesn't recognize the protocol number
-either.)
-
-
-------------------------------------------------------------------------
-
-Q: I get a message saying something like "ioctl(TIOCSETD): Operation
-not permitted".  How do I fix this?
-
-A: This is because pppd is not running as root.  If you have not
-installed pppd setuid-root, you will have to be root to run it.  If
-you have installed pppd setuid-root and you still get this message, it
-is probably because your shell is using some other copy of pppd than
-the installed one - for example, if you are in the pppd directory
-where you've just built pppd and your $PATH has . before /usr/sbin (or
-wherever pppd gets installed).
-
-
-------------------------------------------------------------------------
-
-Q: Has your package been ported to HP/UX or IRIX or AIX?
-
-A: No.  I don't have access to systems running HP/UX or AIX.  No-one
-has volunteered to port it to HP/UX.  I had someone who did a port for
-AIX 4.x, but who is no longer able to maintain it.  And apparently AIX
-3.x is quite different, so it would need a separate port.
-
-IRIX includes a good PPP implementation in the standard distribution,
-as far as I know.
-
-
-------------------------------------------------------------------------
-
-Q: Under SunOS 4, when I try to modload the ppp modules, I get the
-message "can't open /dev/vd: No such device".
-
-A: First check in /dev that there is an entry like this:
-
-crw-r--r--  1  root         57,   0 Oct 2  1991 vd
-
-If not, make one (mknod /dev/vd c 57 0).  If the problem still exists,
-probably your kernel has been configured without the vd driver
-included.  The vd driver is needed for loadable module support.
-
-First, identify the config file that was used.  When you boot your
-machine, or if you run /etc/dmesg, you'll see a line that looks
-something like this:
-
-SunOS Release 4.1.3_U1 (CAP_XBOX) #7: Thu Mar 21 15:31:56 EST 1996
-			^^^^^^^^
-			this is the config file name
-
-The config file will be in the /sys/`arch -k`/conf directory (arch -k
-should return sun4m for a SparcStation 10, sun3x for a Sun 3/80,
-etc.).  Look in there for a line saying "options VDDRV".  If that line
-isn't present (or is commented out), add it (or uncomment it).
-
-You then need to rebuild the kernel as described in the SunOS
-manuals.  Basically you need to run config and make like this:
-
-	/usr/etc/config CAP_XBOX
-	cd ../CAP_XBOX
-	make
-
-(replacing the string CAP_XBOX by the name of the config file for your
-kernel, of course).
-
-Then copy the new kernel to /:
-
-	mv /vmunix /vmunix.working
-	cp vmunix /
-
-and reboot.  Modload should then work.
-
-
-------------------------------------------------------------------------
-
-Q: I'm running Linux (or NetBSD or FreeBSD), and my system comes with
-PPP already.  Should I consider installing this package?  Why?
-
-A: The PPP that is already installed in your system is (or is derived
-from) some version of this PPP package.  You can find out what version
-of this package is already installed with the command "pppd --help".
-If this is older than the latest version, you may wish to install the
-latest version so that you can take advantage of the new features or
-bug fixes.
-
-
-------------------------------------------------------------------------
-
-Q: I'm running pppd in demand mode, and I find that pppd often dials
-out unnecessarily when I try to make a connection within my local
-machine or with a machine on my local LAN.  What can I do about this?
-
-A: Very often the cause of this is that a program is trying to contact
-a nameserver to resolve a hostname, and the nameserver (specified in
-/etc/resolv.conf, usually) is on the far side of the ppp link.  You
-can try executing a command such as `ping myhost' (where myhost is the
-name of the local machine, or some other machine on a local LAN), to
-see whether that starts the ppp link.  If it does, check the setup of
-your /etc/hosts file to make sure you have the local machine and any
-hosts on your local LAN listed, and /etc/resolv.conf and/or
-/etc/nsswitch.conf files to make sure you resolve hostnames from
-/etc/hosts if possible before trying to contact a nameserver.
-
-
-------------------------------------------------------------------------
-
-Q: Since I installed ppp-2.3.6, dialin users to my server have been
-getting this message when they run pppd:
-
-peer authentication required but no suitable secret(s) found for 
-authenticating any peer to us (ispserver)
-
-A: In 2.3.6, the default is to let an unauthenticated peer only use IP
-addresses to which the machine doesn't already have a route.  So on a
-machine with a default route, everyone has to authenticate.  If you
-really don't want that, you can put `noauth' in the /etc/ppp/options
-file.  Note that there is then no check on who is using which IP
-address.  IMHO, this is undesirably insecure, but I guess it may be
-tolerable as long as you don't use any .rhosts files or anything like
-that.  I recommend that you require dialin users to authenticate, even
-if just with PAP using their login password (using the `login' option
-to pppd).  If you do use `noauth', you should at least have a pppusers
-group and set the permissions on pppd to allow only user and group to
-execute it.
-
-------------------------------------------------------------------------
-
-Q: When running pppd as a dial-in server, I often get the message
-"LCP: timeout sending Config-Requests" from pppd.  It seems to be
-random, but dial-out always works fine.  What is wrong?
-
-A: Most modern modems auto-detects the speed of the serial line
-between the modem and the computer.  This auto-detection occurs when
-the computer sends characters to the modem, when the modem is in
-command mode.  It does not occur when the modem is in data mode.
-Thus, if you send commands to the modem at 2400 bps, and then change
-the serial port speed to 115200 bps, the modem will not detect this
-change until something is transmitted from the computer to the modem.
-When running pppd in dial-in mode (i.e. without a connect script),
-pppd sets the speed of the serial port, but does not transmit
-anything.  If the modem was already running at the specified speed,
-everything is fine, but if not, you will just receive garbage from the
-modem.  To cure this, use an init script such as the following:
-
-	pppd ttyS0 115200 modem crtscts init "chat '' AT OK"
-
-To reset the modem and enable auto-answer, use:
-
-	pppd ttyS0 115200 modem crtscts init "chat '' ATZ OK ATS0=1 OK"
diff --git a/mdk-stage1/ppp/PLUGINS b/mdk-stage1/ppp/PLUGINS
deleted file mode 100644
index 0eeabe249..000000000
--- a/mdk-stage1/ppp/PLUGINS
+++ /dev/null
@@ -1,131 +0,0 @@
-Starting with version 2.3.10, pppd includes support for `plugins' -
-pieces of code which can be loaded into pppd at runtime and which can
-affect its behaviour in various ways.  The idea of plugins is to
-provide a way for people to customize the behaviour of pppd without
-having to either apply local patches to each version or get their
-patches accepted into the standard distribution.  My aim is that
-plugins will be able to be used with successive versions of pppd
-without needing to recompile the plugins.
-
-A plugin is a standard shared library object, typically with a name
-ending in .so.  They are loaded using the standard dlopen() library
-call, so plugins are only supported on systems which support shared
-libraries and the dlopen call.  At present pppd is compiled with
-plugin support only under Linux and Solaris.
-
-Plugins are loaded into pppd using the `plugin' option, which takes
-one argument, the name of a shared object file.  The plugin option is
-a privileged option.  I suggest that you give the full path name of
-the shared object file; if you don't, it may be possible for
-unscrupulous users to substitute another shared object file for the
-one you mean to load, e.g. by setting the LD_LIBRARY_PATH variable.
-
-Plugins are usually written in C and compiled and linked to a shared
-object file in the appropriate manner for your platform.  Using gcc
-under Linux, a plugin called `xyz' could be compiled and linked with
-the following commands:
-
-	gcc -c -O xyz.c
-	gcc -shared -o xyz.so xyz.o
-
-There are some example plugins in the pppd/plugins directory in the
-ppp distribution.  Currently there is one example, minconn.c, which
-implements a `minconnect' option, which specifies a minimum connect
-time before the idle timeout applies.
-
-Plugins can access global variables within pppd, so it is useful for
-them to #include "pppd.h" from the pppd source directory.
-
-Every plugin must contain a global procedure called `plugin_init'.
-This procedure will get called (with no arguments) immediately after
-the plugin is loaded.
-
-Plugins can affect the behaviour of pppd in at least three ways:
-
-1. They can add extra options which pppd will then recognize.  This is
-   done by calling the add_options() procedure with a pointer to an
-   array of option_t structures.  The last entry in the array must
-   have its name field set to NULL.
-
-2. Pppd contains `hook' variables which are procedure pointers.  If a
-   given hook is not NULL, pppd will call the procedure it points to
-   at the appropriate point in its processing.  The plugin can set any
-   of these hooks to point to its own procedures.  See below for a
-   description of the hooks which are currently implemented.
-
-3. Plugin code can call any global procedures and access any global
-   variables in pppd.
-
-Here is a list of the currently implemented hooks in pppd.
-
-
-int (*idle_time_hook)(struct ppp_idle *idlep);
-
-The idle_time_hook is called when the link first comes up (i.e. when
-the first network protocol comes up) and at intervals thereafter.  On
-the first call, the idlep parameter is NULL, and the return value is
-the number of seconds before pppd should check the link activity, or 0
-if there is to be no idle timeout.
-
-On subsequent calls, idlep points to a structure giving the number of
-seconds since the last packets were sent and received.  If the return
-value is > 0, pppd will wait that many seconds before checking again.
-If it is <= 0, that indicates that the link should be terminated due
-to lack of activity.
-
-
-int (*holdoff_hook)(void);
-
-The holdoff_hook is called when an attempt to bring up the link fails,
-or the link is terminated, and the persist or demand option was used.
-It returns the number of seconds that pppd should wait before trying
-to reestablish the link (0 means immediately).
-
-
-int (*pap_check_hook)(void);
-int (*pap_passwd_hook)(char *user, char *passwd);
-int (*pap_auth_hook)(char *user, int userlen,
-		     char *passwd, int passlen,
-		     char **msgp, int *msglenp,
-		     struct wordlist **paddrs,
-		     struct wordlist **popts);
-
-These hooks are designed to allow a plugin to replace the normal PAP
-password processing in pppd with something different (e.g. contacting
-an external server).
-
-The pap_check_hook is called to check whether there is any possibility
-that the peer could authenticate itself to us.  If it returns 1, pppd
-will ask the peer to authenticate itself.  If it returns 0, pppd will
-not ask the peer to authenticate itself (but if authentication is
-required, pppd may exit, or terminate the link before network protocol
-negotiation).  If it returns -1, pppd will look in the pap-secrets
-file as it would normally.
-
-The pap_passwd_hook is called to determine what username and password
-pppd should use in authenticating itself to the peer with PAP.  The
-user string will already be initialized, by the `user' option, the
-`name' option, or from the hostname, but can be changed if necessary.
-MAXNAMELEN bytes of space are available at *user, and MAXSECRETLEN
-bytes of space at *passwd.  If this hook returns 0, pppd will use the
-values at *user and *passwd; if it returns -1, pppd will look in the
-pap-secrets file, or use the value from the +ua or password option, as
-it would normally.
-
-The pap_auth_hook is called to determine whether the username and
-password supplied by the peer are valid.  user and passwd point to
-null-terminated strings containing the username and password supplied
-by the peer, with non-printable characters converted to a printable
-form.  The pap_auth_hook function should set msg to a string to be
-returned to the peer and return 1 if the username/password was valid
-and 0 if not.  If the hook returns -1, pppd will look in the
-pap-secrets file as usual.
-
-If the username/password was valid, the hook can set *paddrs to point
-to a wordlist containing the IP address(es) which the peer is
-permitted to use, formatted as in the pap-secrets file.  It can also
-set *popts to a wordlist containing any extra options for this user
-which pppd should apply at this point.
-
-
-## $Id$ ##
diff --git a/mdk-stage1/ppp/README b/mdk-stage1/ppp/README
deleted file mode 100644
index aa1e5f9c2..000000000
--- a/mdk-stage1/ppp/README
+++ /dev/null
@@ -1,168 +0,0 @@
-This is the README file for ppp-2.4, a package which implements the
-Point-to-Point Protocol (PPP) to provide Internet connections over
-serial lines.
-
-
-Introduction.
-*************
-
-The Point-to-Point Protocol (PPP) provides a standard way to establish
-a network connection over a serial link.  At present, this package
-supports IP and the protocols layered above IP, such as TCP and UDP.
-The Linux and Solaris ports of this package have optional support for
-IPV6; the Linux port of this package also has support for IPX.
-
-This software consists of two parts:
-
-- Kernel code, which establishes a network interface and passes
-packets between the serial port, the kernel networking code and the
-PPP daemon (pppd).  This code is implemented using STREAMS modules on
-SunOS 4.x and Solaris, and as a line discipline under Linux and FreeBSD.
-
-- The PPP daemon (pppd), which negotiates with the peer to establish
-the link and sets up the ppp network interface.  Pppd includes support
-for authentication, so you can control which other systems may make a
-PPP connection and what IP addresses they may use.
-
-The primary platforms supported by this package are Linux and Solaris.
-Code for SunOS 4.x is included here but is largely untested.  I have
-code for NeXTStep, FreeBSD, SVR4, Tru64 (Digital Unix), AIX and Ultrix
-but no active maintainers for these platforms.  Code for all of these
-except AIX is included in the ppp-2.3.11 release.
-
-
-Installation.
-*************
-
-The file SETUP contains general information about setting up your
-system for using PPP.  There is also a README file for each supported
-system, which contains more specific details for installing PPP on
-that system.  The supported systems, and the corresponding README
-files, are:
-
-	Linux				README.linux
-	Solaris 2			README.sol2
-	SunOS 4.x			README.sunos4
-
-In each case you start by running the ./configure script.  This works
-out which operating system you are using and creates symbolic links to
-the appropriate makefiles.  You then run `make' to compile the
-user-level code, and (as root) `make install' to install the
-user-level programs pppd, chat and pppstats.
-
-N.B. Since 2.3.0, leaving the permitted IP addresses column of the
-pap-secrets or chap-secrets file empty means that no addresses are
-permitted.  You need to put a "*" in that column to allow the peer to
-use any IP address.  (This only applies where the peer is
-authenticating itself to you, of course.)
-
-
-What's new in ppp-2.4.1.
-************************
-
-* Pppd can now print out the set of options that are in effect.  The
-  new `dump' option causes pppd to print out the option values after
-  option parsing is complete.  The `dryrun' option causes pppd to
-  print the options and then exit.
-
-* The option parsing code has been fixed so that options in the
-  per-tty options file are parsed correctly, and don't override values
-  from the command line in most cases.
-
-* The plugin option now looks in /usr/lib/pppd/<pppd-version> (for
-  example, /usr/lib/pppd/2.4.1b1) for shared objects for plugins if
-  there is no slash in the plugin name.
-
-* When loading a plugin, pppd will now check the version of pppd for
-  which the plugin was compiled, and refuse to load it if it is
-  different to pppd's version string.  To enable this, the plugin
-  source needs to #include "pppd.h" and have a line saying:
-	char pppd_version[] = VERSION;
-
-* There is a bug in zlib, discovered by James Carlson, which can cause
-  kernel memory corruption if Deflate is used with the lowest setting,
-  8.  As a workaround pppd will now insist on using at least 9.
-
-* Pppd should compile on Solaris and SunOS again.
-
-* Pppd should now set the MTU correctly on demand-dialled interfaces.
-
-
-What was new in ppp-2.4.0.
-**************************
-
-* Multilink: this package now allows you to combine multiple serial
-  links into one logical link or `bundle', for increased bandwidth and
-  reduced latency.  This is currently only supported under the
-  Linux-2.3.99pre5 or later kernels.
-
-* All the pppd processes running on a system now write information
-  into a common database.  I used the `tdb' code from samba for this.
-
-* New hooks have been added.
-
-For a list of the changes made during the 2.3 series releases of this
-package, see the Changes-2.3 file.
-
-
-Compression methods.
-********************
-
-This package supports two packet compression methods: Deflate and
-BSD-Compress.  Other compression methods which are in common use
-include Predictor, LZS, and MPPC.  These methods are not supported for
-two reasons - they are patent-encumbered, and they cause some packets
-to expand slightly, which pppd doesn't currently allow for.
-BSD-Compress is also patent-encumbered (its inclusion in this package
-can be considered a historical anomaly :-) but it doesn't ever expand
-packets.  Neither does Deflate, which uses the same algorithm as gzip.
-
-
-Patents.
-********
-
-The BSD-Compress algorithm used for packet compression is the same as
-that used in the Unix "compress" command.  It is apparently covered by
-U.S. patents 4,814,746 (owned by IBM) and 4,558,302 (owned by Unisys),
-and corresponding patents in various other countries (but not
-Australia).  If this is of concern, you can build the package without
-including BSD-Compress.  To do this, edit net/ppp-comp.h to change the
-definition of DO_BSD_COMPRESS to 0.  The bsd-comp.c files are then no
-longer needed, so the references to bsd-comp.o may optionally be
-removed from the Makefiles.
-
-
-Contacts.
-*********
-
-The comp.protocols.ppp newsgroup is a useful place to get help if you
-have trouble getting your ppp connections to work.  Please do not send
-me questions of the form "please help me get connected to my ISP" -
-I'm sorry, but I simply do not have the time to answer all the
-questions like this that I get.
-
-If you find bugs in this package, please report them to the maintainer
-for the port for the operating system you are using:
-
-Linux			Paul Mackerras <paulus@linuxcare.com>
-Solaris 2		James Carlson <james.d.carlson@east.sun.com>
-SunOS 4.x		Adi Masputra <adi.masputra@sun.com>
-
-
-Copyrights:
-***********
-
-All of the code can be freely used and redistributed.  The individual
-source files each have their own copyright and permission notice; some
-have a BSD-style notice and some are under the GPL.
-
-
-Distribution:
-*************
-
-The primary site for releases of this software is:
-
-	ftp://linuxcare.com.au/pub/ppp/
-
-
-($Id$)
diff --git a/mdk-stage1/ppp/README.MSCHAP80 b/mdk-stage1/ppp/README.MSCHAP80
deleted file mode 100644
index d3ed291b7..000000000
--- a/mdk-stage1/ppp/README.MSCHAP80
+++ /dev/null
@@ -1,284 +0,0 @@
-PPP Client Support for Microsoft's CHAP-80
-==========================================
-
-Eric Rosenquist          rosenqui@strataware.com
-(updated by Paul Mackerras)
-(updated by Al Longyear)
-(updated by Farrell Woods)
-
-INTRODUCTION
-
-Microsoft has introduced an extension to the Challenge/Handshake
-Authentication Protocol (CHAP) which avoids storing cleartext
-passwords on a server.  (Unfortunately, this is not as secure as it
-sounds, because the encrypted password stored on a server can be used
-by a bogus client to gain access to the server just as easily as if
-the password were stored in cleartext.)  The details of the Microsoft
-extensions can be found in the document:
-
-    <ftp://ftp.microsoft.com/developr/rfc/chapexts.txt>
-
-In short, MS-CHAP is identified as <auth chap 80> since the hex value
-of 80 is used to designate Microsoft's scheme.  Standard PPP CHAP uses
-a value of 5.  If you enable PPP debugging with the "debug" option and
-see something like the following in your logs, the remote server is
-requesting MS-CHAP:
-
-  rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <auth chap 80> <magic 0x46a3>]
-                                           ^^^^^^^^^^^^
-
-The standard pppd implementation will indicate its lack of support for
-MS-CHAP by NAKing it:
-
-  sent [LCP ConfNak id=0x2 <auth chap 05>]
-
-Windows NT Server systems are often configured to "Accept only
-Microsoft Authentication" (this is intended to enhance security).  Up
-until now, that meant that you couldn't use this version of PPPD to
-connect to such a system.  I've managed to get a client-only
-implementation of MS-CHAP working; it will authenticate itself to
-another system using MS-CHAP, but if you're using PPPD as a dial-in
-server, you won't be able to use MS-CHAP to authenticate the clients.
-This would not be a lot of extra work given that the framework is in
-place, but I didn't need it myself so I didn't implement it.
-
-
-BUILDING THE PPPD
-
-MS-CHAP uses a combination of MD4 hashing and DES encryption for
-authentication.  You may need to get Eric Young's libdes library in
-order to use my MS-CHAP extensions.  A lot of UNIX systems already
-have DES encryption available via the crypt(3), encrypt(3) and
-setkey(3) interfaces.  Some may (such as that on Digital UNIX)
-provide only the encryption mechanism and will not perform
-decryption.  This is okay.  We only need to encrypt to perform
-MS-CHAP authentication.
-
-If you have encrypt/setkey available, then hopefully you need only
-define these two things in your Makefile: -DUSE_CRYPT and -DCHAPMS.
-Skip the paragraphs below about obtaining and building libdes.  Do
-the "make clean" and "make" as described below.  Linux users
-should not need to modify their Makefiles.  Instead,
-just do "make CHAPMS=1 USE_CRYPT=1".
-
-If you don't have encrypt and setkey, you will need Eric Young's
-libdes library.  You can find it in:
-
-ftp://ftp.funet.fi/pub/crypt/mirrors/ftp.psy.uq.oz.au/DES/libdes-3.06.tar.gz
-
-Australian residents can get libdes from Eric Young's site:
-
-ftp://ftp.psy.uq.oz.au/pub/Crypto/DES/libdes-3.06.tar.gz
-
-It is also available on many other sites (ask Archie).
-
-I used libdes-3.06, but hopefully anything newer than that will work
-also.  Get the library, build and test it on your system, and install
-it somewhere (typically /usr/local/lib and /usr/local/include).
-
-
-
-You should now be ready to (re)compile the PPPD.  Go to the pppd
-subdirectory and make sure the Makefile contains "-DCHAPMS" in the
-CFLAGS or COMPILE_FLAGS macro, and that the LIBS macro (or LDADD for
-BSD systems) contains "-ldes".  Depending on your system and where the
-DES library was installed, you may also need to alter the include and
-library paths used by your compiler.
-
-Do a "make clean" and then a "make" to rebuild pppd.  Assuming all
-goes well, install the new pppd and move on to the CONFIGURATION
-section.
-
-
-CONFIGURATION
-
-If you've never used PPPD with CHAP before, read the man page (type
-"man pppd") and read the description in there.  Basically, you need to
-edit the "chap-secrets" file typically named /etc/ppp/chap-secrets.
-This should contain the following two lines for each system with which
-you use CHAP (with no leading blanks):
-
-    RemoteHost  Account     Secret
-    Account     RemoteHost  Secret
-
-Note that you need both lines and that item 1 and 2 are swapped in the
-second line.  I'm not sure why you need it twice, but it works and I didn't
-have time to look into it further.  The "RemoteHost" is a somewhat
-arbitrary name for the remote Windows NT system you're dialing.  It doesn't
-have to match the NT system's name, but it *does* have to match what you
-use with the "remotename" parameter.  The "Account" is the Windows NT
-account name you have been told to use when dialing, and the "Secret" is
-the password for that account.  For example, if your service provider calls
-their machine "DialupNT" and tells you your account and password are
-"customer47" and "foobar", add the following to your chap-secrets file:
-
-    DialupNT    customer47  foobar
-    customer47  DialupNT    foobar
-
-The only other thing you need to do for MS-CHAP (compared to normal CHAP)
-is to always use the "remotename" option, either on the command line or in
-your "options" file (see the pppd man page for details).  In the case of
-the above example, you would need to use the following command line:
-
-    pppd name customer47 remotename DialupNT <other options>
-
-or add:
-
-    name customer47
-    remotename DialupNT
-
-to your PPPD "options" file.
-
-The "remotename" option is required for MS-CHAP since Microsoft PPP servers
-don't send their system name in the CHAP challenge packet.
-
-
-E=691 (AUTHENTICATION_FAILURE) ERRORS WHEN YOU HAVE THE VALID SECRET (PASSWORD)
-
-If your RAS server is not the domain controller and is not a 'stand-alone'
-server then it must make a query to the domain controller for your domain.
-
-You need to specify the domain name with the user name when you attempt to
-use this type of a configuration. The domain name is specified with the
-local name in the chap-secrets file and with the option for the 'name'
-parameter.
-
-For example, the previous example would become:
-
-    DialupNT            domain\\customer47   foobar
-    domain\\customer47  DialupNT             foobar
-
-and
-
-    pppd name 'domain\\customer47' remotename DialupNT <other options>
-
-or add:
-
-    name domain\\customer47
-    remotename DialupNT
-
-when the Windows NT domain name is simply called 'domain'.
-
-
-TROUBLESHOOTING
-
-Assuming that everything else has been configured correctly for PPP and
-CHAP, the MS-CHAP-specific problems you're likely to encounter are mostly
-related to your Windows NT account and its settings.  A Microsoft server
-returns error codes in its CHAP response.  The following are extracted from
-Microsoft's "chapexts.txt" file referenced above:
-
- 646 ERROR_RESTRICTED_LOGON_HOURS
- 647 ERROR_ACCT_DISABLED
- 648 ERROR_PASSWD_EXPIRED
- 649 ERROR_NO_DIALIN_PERMISSION
- 691 ERROR_AUTHENTICATION_FAILURE
- 709 ERROR_CHANGING_PASSWORD
-
-You'll see these in your pppd log as a line similar to:
-
-   Remote message: E=649 R=0
-
-The "E=" is the error number from the table above, and the "R=" flag
-indicates whether the error is transient and the client should retry.  If
-you consistently get error 691, then either you're using the wrong account
-name/password, or the DES library or MD4 hashing (in md4.c) aren't working
-properly.  Verify your account name and password (use a Windows NT or
-Windows 95 system to dial-in if you have one available).  If that checks
-out, test the DES library with the "destest" program included with the DES
-library.  If DES checks out, the md4.c routines are probably failing
-(system byte ordering may be a problem) or my code is screwing up.  I've
-only got access to a Linux system, so you're on your own for anything else.
-
-Another thing that might cause problems is that some RAS servers won't
-respond at all to LCP config requests without seeing the word "CLIENT"
-from the other end.  If you see pppd sending out LCP config requests
-without getting any reply, try putting something in your chat script
-to send the word CLIENT after the modem has connected.
-
-If everything compiles cleanly, but fails at authentication time, then
-it might be a case of the MD4 or DES code screwing up.  The following
-small program can be used to test the MS-CHAP code to see if it
-produces a known response:
-
------------------
-#include <stdio.h>
-
-#include "pppd.h"
-#include "chap.h"
-#include "chap_ms.h"
-
-int main(argc, argv)
-    int     argc;
-    char    *argv[];
-{
-    u_char          challenge[8];
-    int             challengeInt[sizeof(challenge)];
-    chap_state      cstate;
-    int             i;
-
-    if (argc != 3) {
-        fprintf(stderr, "Usage: %s <16-hexchar challenge> <password>\n",
-        argv[0]); exit(1);
-    }
-
-    sscanf(argv[1], "%2x%2x%2x%2x%2x%2x%2x%2x",
-           challengeInt + 0, challengeInt + 1, challengeInt + 2,
-           challengeInt + 3, challengeInt + 4, challengeInt + 5,
-           challengeInt + 6, challengeInt + 7);
-
-    for (i = 0; i < sizeof(challenge); i++)
-        challenge[i] = (u_char)challengeInt[i];
-
-    ChapMS(&cstate, challenge, sizeof(challenge), argv[2], strlen(argv[2]));
-    printf("Response length is %d, response is:", cstate.resp_length);
-
-    for (i = 0; i < cstate.resp_length; i++) {
-        if (i % 8 == 0)
-            putchar('\n');
-        printf("%02X ", (unsigned int)cstate.response[i]);
-    }
-
-    putchar('\n');
-
-    exit(0);
-}
--------------
-
-This needs to link against chap_ms.o, md4.o, and the DES library.  When 
-you run it with the command line:
-
- $ testchap 00000000000000000000000000000000 hello
-
-it should output the following:
-
- Response length is 49, response is:
- 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00
- F4 D9 9D AF 82 64 DC 3C
- 53 F9 BC 92 14 B5 5D 9E
- 78 C4 21 48 9D B7 A8 B4
- 01
-
-if not, then either the DES library is not working, the MD4 code isn't 
-working, or there are some problems with the port of the code in 
-chap_ms.c.
-
-
-STILL TO DO
-
-A site using only MS-CHAP to authenticate has no need to store cleartext
-passwords in the "chap-secrets" file.  A utility that spits out the ASCII
-hex MD4 hash of a given password would be nice, and would allow that hash
-to be used in chap-secrets in place of the password.  The code to do this
-could quite easily be lifted from chap_ms.c (you have to convert the
-password to Unicode before hashing it).  The chap_ms.c file would also have
-to be changed to recognize a password hash (16 binary bytes == 32 ASCII hex
-characters) and skip the hashing stage.
-
-A server implementation would allow MS-CHAP to be used with Windows NT and
-Windows 95 clients for enhanced security.  Some new command-line options
-would be required, as would code to generate the Challenge packet and
-verify the response.  Most of the helper functions are in place, so this
-shouldn't be too hard for someone to add.
diff --git a/mdk-stage1/ppp/README.cbcp b/mdk-stage1/ppp/README.cbcp
deleted file mode 100644
index 6f7b7685e..000000000
--- a/mdk-stage1/ppp/README.cbcp
+++ /dev/null
@@ -1,97 +0,0 @@
-	     Microsoft Call Back Configuration Protocol.
-			by Pedro Roque Marques
-			(updated by Paul Mackerras)
-
-The CBCP is a method by which the Microsoft Windows NT Server may
-implement additional security. It is possible to configure the server
-in such a manner so as to require that the client systems which
-connect with it are required that following a valid authentication to
-leave a method by which the number may be returned call.
-
-It is a requirement of servers so configured that the protocol be
-exchanged.
-
-So, this set of patches may be applied to the pppd process to enable
-the cbcp client *only* portion of the specification. It is primarily
-meant to permit connection with Windows NT Servers.
-
-The ietf-working specification may be obtained from ftp.microsoft.com
-in the developr/rfc directory.
-
-The ietf task group has decided to recommend that the LCP sequence be
-extended to permit the callback operation. For this reason, these
-patches are not 'part' of pppd but are an adjunct to the code.
-
-To enable CBCP support, all that is required is to change the
-appropriate Makefile in the pppd subdirectory to add "-DCBCP_SUPPORT"
-to the CFLAGS definition and add cbcp.o to the list of object files,
-and then recompile pppd.  The patch below does this for Makefile.bsd
-and Makefile.linux.
-
-
---------------------------------cut here-------------------------------
-diff -r -c ppp-2.3.orig/pppd/Makefile.bsd ppp-2.3/pppd/Makefile.bsd
-*** ppp-2.3.orig/pppd/Makefile.bsd	Tue Oct  8 13:33:33 1996
---- ppp-2.3/pppd/Makefile.bsd	Fri Apr 11 23:59:15 1997
-***************
-*** 4,14 ****
-  # -D_BITYPES is for FreeBSD, which doesn't define anything to
-  # tell us that u_int32_t gets defined if <sys/types.h> is included.
-  # Remove for older *BSD systems for which this isn't true.
-! CFLAGS+= -g -I.. -DHAVE_PATHS_H -D_BITYPES
-  
-  PROG=	pppd
-  SRCS=	main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
-! 	demand.c auth.c options.c sys-bsd.c
-  MAN=	pppd.cat8
-  MAN8=	pppd.8
-  BINMODE=4555
---- 4,14 ----
-  # -D_BITYPES is for FreeBSD, which doesn't define anything to
-  # tell us that u_int32_t gets defined if <sys/types.h> is included.
-  # Remove for older *BSD systems for which this isn't true.
-! CFLAGS+= -I.. -DHAVE_PATHS_H -D_BITYPES -DCBCP_SUPPORT
-  
-  PROG=	pppd
-  SRCS=	main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
-! 	demand.c auth.c options.c sys-bsd.c cbcp.c
-  MAN=	pppd.cat8
-  MAN8=	pppd.8
-  BINMODE=4555
-diff -r -c ppp-2.3.orig/pppd/Makefile.linux ppp-2.3/pppd/Makefile.linux
-*** ppp-2.3.orig/pppd/Makefile.linux	Tue Oct  8 15:42:41 1996
---- ppp-2.3/pppd/Makefile.linux	Sat Apr 12 00:02:28 1997
-***************
-*** 14,20 ****
-  	   ipxcp.h cbcp.h
-  MANPAGES = pppd.8
-  PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
-! 	   auth.o options.o demand.o sys-linux.o ipxcp.o
-  
-  all: pppd
-  
---- 14,20 ----
-  	   ipxcp.h cbcp.h
-  MANPAGES = pppd.8
-  PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
-! 	   auth.o options.o demand.o sys-linux.o ipxcp.o cbcp.o
-  
-  all: pppd
-  
-***************
-*** 36,42 ****
-  #INCLUDE_DIRS= -I/usr/include -I..
-  INCLUDE_DIRS=
-  
-! COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE
-  
-  CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-  
---- 36,42 ----
-  #INCLUDE_DIRS= -I/usr/include -I..
-  INCLUDE_DIRS=
-  
-! COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE -DCBCP_SUPPORT
-  
-  CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-  
diff --git a/mdk-stage1/ppp/README.linux b/mdk-stage1/ppp/README.linux
deleted file mode 100644
index 62ed9ca7f..000000000
--- a/mdk-stage1/ppp/README.linux
+++ /dev/null
@@ -1,297 +0,0 @@
-		PPP for Linux
-		-------------
-
-		Paul Mackerras
-		8 March 2001
-
-		for ppp-2.4.1
-
-1. Introduction
----------------
-
-The Linux PPP implementation includes both kernel and user-level
-parts.  This package contains the user-level part, which consists of
-the PPP daemon (pppd) and associated utilities.  In the past this
-package has contained updated kernel drivers.  This is no longer
-necessary, as the current 2.2 and 2.4 kernel sources contain
-up-to-date drivers.
-
-The Linux PPP implementation is capable of being used both for
-initiating PPP connections (as a `client') or for handling incoming
-PPP connections (as a `server').  Note that this is an operational
-distinction, based on how the connection is created, rather than a
-distinction that is made in the PPP protocols themselves.
-
-Mostly this package is used for PPP connections over modems connected
-via asynchronous serial ports, so this guide concentrates on this
-situation.
-
-The PPP protocol consists of two parts.  One is a scheme for framing
-and encoding packets, the other is a series of protocols called LCP,
-IPCP, PAP and CHAP, for negotiating link options and for
-authentication.  This package similarly consists of two parts: a
-kernel module which handles PPP's low-level framing protocol, and a
-user-level program called pppd which implements PPP's negotiation
-protocols.
-
-The kernel module assembles/disassembles PPP frames, handles error
-detection, and forwards packets between the serial port and either the
-kernel network code or the user-level program pppd.  IP packets go
-directly to the kernel network code.  So once pppd has negotiated the
-link, it in practice lies completely dormant until you want to take
-the link down, when it negotiates a graceful disconnect.
-
-
-2. Installation
----------------
-
-2.1 Kernel driver
-
-Assuming you are running a recent 2.2 or 2.4 (or later) series kernel,
-the kernel source code will contain an up-to-date kernel PPP driver.
-If the PPP driver was included in your kernel configuration when your
-kernel was built, then you only need to install the user-level
-programs.  Otherwise you will need to get the source tree for your
-kernel version, configure it with PPP included, and recompile.  Most
-Linux distribution vendors ship kernels with PPP included in the
-configuration.
-
-The PPP driver can be either compiled into the kernel or compiled as a
-kernel module.  If it is compiled into the kernel, the PPP driver is
-included in the kernel image which is loaded at boot time.  If it is
-compiled as a module, the PPP driver is present in one or more files
-under /lib/modules and is loaded into the kernel when needed.
-
-The 2.2 series kernels contain an older version of the kernel PPP
-driver, one which doesn't support multilink.  If you want multilink,
-you need to run the latest 2.4 series kernel.  The kernel PPP driver
-was completely rewritten for the 2.4 series kernels to support
-multilink and to allow it to operate over diverse kinds of
-communication medium (the 2.2 driver only operates over serial ports
-and devices which look like serial ports, such as pseudo-ttys).
-
-Under the 2.2 kernels, if PPP is compiled as a module, the PPP driver
-modules should be present in the /lib/modules/`uname -r`/net directory
-(where `uname -r` represents the kernel version number).  The PPP
-driver module itself is called ppp.o, and there will usually be
-compression modules there, ppp_deflate.o and bsd_comp.o, as well as
-slhc.o, which handles TCP/IP header compression.  If the PPP driver is
-compiled into the kernel, the compression code will still be compiled
-as modules, for kernels before 2.2.17pre12.  For 2.2.17pre12 and later,
-if the PPP driver is compiled in, the compression code will also.
-
-Under the 2.4 kernels, there are two PPP modules, ppp_generic.o and
-ppp_async.o, plus the compression modules (ppp_deflate.o, bsd_comp.o
-and slhc.o).  If the PPP generic driver is compiled into the kernel,
-the other four can then be present either as modules or compiled into
-the kernel.  There is a sixth module, ppp_synctty.o, which is used for
-synchronous tty devices such as high-speed WAN adaptors.
-
-
-2.2 User-level programs
-
-If you obtained this package in .rpm or .deb format, you simply follow
-the usual procedure for installing the package.
-
-If you are using the .tar.gz form of this package, then cd into the
-ppp-2.4.1b1 directory you obtained by unpacking the archive and issue
-the following commands:
-
-$ ./configure
-$ make
-# make install
-
-The `make install' has to be done as root.  This makes and installs
-four programs and their man pages: pppd, chat, pppstats and pppdump.
-If the /etc/ppp configuration directory doesn't exist, the `make
-install' step will create it and install some default configuration
-files.
-
-
-2.3 System setup for 2.4 kernels
-
-Under the 2.4 series kernels, pppd needs to be able to open /dev/ppp,
-character device (108,0).  If you are using devfs (the device
-filesystem), the /dev/ppp node will automagically appear when the
-ppp_generic module is loaded, or at startup if ppp_generic is compiled
-in.
-
-If you have ppp_generic as a module, and you are using devfsd (the
-devfs daemon), you will need to add a line like this to your
-/etc/devfsd.conf:
-
-LOOKUP		ppp		MODLOAD
-
-Otherwise you will need to create a /dev/ppp device node with the
-commands:
-
-# mknod /dev/ppp c 108 0
-# chmod 600 /dev/ppp
-
-If you use module autoloading and have PPP as a module, you will need
-to add the following to your /etc/modules.conf or /etc/conf.modules:
-
-alias /dev/ppp		ppp_generic
-alias char-major-108	ppp_generic
-alias tty-ldisc-3	ppp_async
-alias tty-ldisc-14	ppp_synctty
-alias ppp-compress-21	bsd_comp
-alias ppp-compress-24	ppp_deflate
-alias ppp-compress-26	ppp_deflate
-
-
-2.4 System setup under 2.2 series kernels
-
-Under the 2.2 series kernels, you should add the following to your
-/etc/modules.conf or /etc/conf.modules:
-
-alias tty-ldisc-3	ppp
-alias ppp-compress-21	bsd_comp
-alias ppp-compress-24	ppp_deflate
-alias ppp-compress-26	ppp_deflate
-
-
-3. Getting help with problems
------------------------------
-
-If you have problems with your PPP setup, or you just want to ask some
-questions, or better yet if you can help others with their PPP
-questions, then you should join the linux-ppp mailing list.  Send an
-email to majordomo@vger.kernel.org with a line in the body saying
-
-subscribe linux-ppp
-
-To leave the mailing list, send an email to majordomo@vger.kernel.org
-with a line in the body saying
-
-unsubscribe linux-ppp
-
-To send a message to the list, email it to linux-ppp@vger.kernel.org.
-You don't have to be subscribed to send messages to the list.
-
-You can also email me (paulus@linuxcare.com.au) but I am overloaded
-with email and I can't respond to most messages I get in a timely
-fashion.
-
-There are also several relevant news groups, such as comp.protocols.ppp,
-comp.os.linux.networking, or comp.os.linux.setup.
-
-
-4. Configuring your dial-out PPP connections
---------------------------------------------
-
-Some Linux distribution makers include tools in their distributions
-for setting up PPP connections.  For example, for Red Hat Linux and
-derivatives, you should probably use linuxconf or netcfg to set up
-your PPP connections.
-
-The two main windowing environments for Linux, KDE and Gnome, both
-come with GUI utilities for configuring and controlling PPP dial-out
-connections.  They are convenient and relatively easy to configure.
-
-A third alternative is to use a PPP front-end package such as wvdial
-or ezppp.  These also will handle most of the details of talking to
-the modem and setting up the PPP connection for you.
-
-Assuming that you don't want to use any of these tools, you want to
-set up the configuration manually yourself, then read on.  This
-document gives a brief description and example.  More details can be
-found by reading the pppd and chat man pages and the PPP-HOWTO.
-
-We assume that you have a modem that uses the Hayes-compatible AT
-command set connected to an async serial port (e.g. /dev/ttyS0) and
-that you are dialling out to an ISP.  
-
-The trickiest and most variable part of setting up a dial-out PPP
-connection is the part which involves getting the modem to dial and
-then invoking PPP service at the far end.  Generally, once both ends
-are talking PPP the rest is relatively straightforward.
-
-Now in fact pppd doesn't know anything about how to get modems to dial
-or what you have to say to the system at the far end to get it to talk
-PPP.  That's handled by an external program such as chat, specified
-with the connect option to pppd.  Chat takes a series of strings to
-expect from the modem interleaved with a series of strings to send to
-the modem.  See the chat man page for more information.  Here is a
-simple example for connecting to an ISP, assuming that the ISP's
-system starts talking PPP as soon as it answers the phone:
-
-pppd connect 'chat -v "" AT OK ATDT5551212 ~' \
-	/dev/ttyS0 57600 crtscts debug defaultroute
-
-Going through pppd's options in order:
-    connect 'chat ...'  This gives a command to run to contact the
-    PPP server.  Here the supplied 'chat' program is used to dial a
-    remote computer.  The whole command is enclosed in single quotes
-    because pppd expects a one-word argument for the 'connect' option.
-    The options to 'chat' itself are:
-
-         -v            verbose mode; log what we do to syslog
-         ""            don't wait for any prompt, but instead...
-	 AT	       send the string "AT"
-	 OK	       expect the response "OK", then
-         ATDT5551212   dial the modem, then
-         ~             wait for a ~ character, indicating the start
-		       of a PPP frame from the server
-
-    /dev/ttyS0	       specifies which serial port the modem is connected to
-    57600	       specifies the baud rate to use
-    crtscts	       use hardware flow control using the RTS & CTS signals
-    debug	       log the PPP negotiation with syslog
-    defaultroute       add default network route via the PPP link
-
-Pppd will write error messages and debugging logs to the syslogd
-daemon using the facility name "daemon".  These messages may already
-be logged to the console or to a file like /var/log/messages; consult
-your /etc/syslog.conf file to see.  If you want to make all pppd
-messages go to a file such as /var/log/ppp-debug, add the line
-
-daemon.*					/var/log/ppp-debug
-        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-           This is one or more tabs. Do not use spaces.
-
-to syslog.conf; make sure to put one or more TAB characters (not
-spaces!) between the two fields.  Then you need to create an empty
-/var/log/ppp-debug file with a command such as
-
-	touch /var/log/ppp-debug
-
-and then restart syslogd, usually by sending it a SIGHUP signal with a
-command like this:
-
-	killall -HUP syslogd
-
-
-4.1 Is the link up?
-
-The main way to tell if your PPP link is up and operational is the
-ifconfig ("interface configuration") command.  Type
-
-	/sbin/ifconfig
-
-at a shell prompt.  It should print a list of interfaces including one
-like this example:
-
-ppp0      Link encap Point-to-Point Protocol
-          inet addr 192.76.32.3  P-t-P 129.67.1.165  Mask 255.255.255.0
-          UP POINTOPOINT RUNNING  MTU 1500  Metric 1
-          RX packets 33 errors 0 dropped 0 overrun 0
-          TX packets 42 errors 0 dropped 0 overrun 0
-
-Assuming that ifconfig shows the ppp network interface, you can test
-the link using the ping command like this:
-
-	/sbin/ping -c 3 129.67.1.165
-
-where the address you give is the address shown as the P-t-P address
-in the ifconfig output.  If the link is operating correctly, you
-should see output like this:
-
-  PING 129.67.1.165 (129.67.1.165): 56 data bytes
-  64 bytes from 129.67.1.165: icmp_seq=0 ttl=255 time=268 ms
-  64 bytes from 129.67.1.165: icmp_seq=1 ttl=255 time=247 ms
-  64 bytes from 129.67.1.165: icmp_seq=2 ttl=255 time=266 ms
-  --- 129.67.1.165 ping statistics ---
-  3 packets transmitted, 3 packets received, 0% packet loss
-  round-trip min/avg/max = 247/260/268 ms
-
diff --git a/mdk-stage1/ppp/README.sol2 b/mdk-stage1/ppp/README.sol2
deleted file mode 100644
index 4c862208f..000000000
--- a/mdk-stage1/ppp/README.sol2
+++ /dev/null
@@ -1,220 +0,0 @@
-This file describes the installation process for ppp-2.3 on systems
-running Solaris 2.  The Solaris 2 and SVR4 ports share a lot of code
-but are not identical.  The STREAMS kernel modules and driver for
-Solaris 2 are in the svr4 directory (and use some code from the
-modules directory).
-
-NOTE: Although the kernel driver and modules have been designed to
-operate correctly on SMP systems, they have not been extensively
-tested on SMP machines.  Some users of SMP Solaris x86 systems have
-reported system problems apparently linked to the use of previous
-versions of this software.  I believe these problems have been fixed.
-
-
-Installation.
-*************
-
-1. Run the configure script and make the user-level programs and the
-kernel modules.
-
-	./configure
-	make
-
-If you wish to use gcc (or another compiler) instead of Sun's cc, edit
-the svr4/Makedefs file and uncomment the definition of CC.  You can
-also change the options passed to the C compiler by editing the COPTS
-definition.
-
-2. Install the programs and kernel modules: as root, do
-
-	make install
-
-This installs pppd, chat and pppstats in /usr/local/bin and the kernel
-modules in /kernel/drv and /kernel/strmod, and creates the /etc/ppp
-directory and populates it with default configuration files.  You can
-change the installation directories by editing svr4/Makedefs.
-
-If your system normally has only one network interface, the default
-Solaris 2 system startup scripts will disable IP forwarding in the IP
-kernel module.  This will prevent the remote machine from using the
-local machine as a gateway to access other hosts.  The solution is to
-create an /etc/ppp/ip-up script containing something like this:
-
-	#!/bin/sh
-	/usr/sbin/ndd -set /dev/ip ip_forwarding 1
-
-See the man page for ip(7p) for details.
-
-Dynamic STREAMS Re-Plumbing Support.
-************************************
-
-Solaris 8 includes dynamic re-plumbing support. With this, modules
-below ip can be inserted, or removed, without having the ip stream be
-unplumbed, and re-plumbed again. All states in ip for an interface
-will therefore now be preserved. Users can install (or upgrade)
-modules like firewall, bandwidth manager, cache manager, tunneling,
-etc., without shutting the machine down.
-
-To support this, ppp driver now uses /dev/udp instead of /dev/ip for
-the ip stream. The interface stream (where ip module pushed on top of
-ppp) is then I_PLINK'ed below the ip stream. /dev/udp is used because
-STREAMS will not let a driver be PLINK'ed under itself, and /dev/ip is
-typically the driver at the bottom of the tunneling interfaces
-stream.  The mux ids of the ip streams are then added using
-SIOCSxIFMUXID ioctl.
-
-Users will be able to see the modules on the interface stream by, for
-example:
-
-    pikapon% ifconfig ppp modlist
-    0 ip
-    1 ppp
-
-Or arbitrarily if bandwidth manager and firewall modules are installed:
-
-    pikapon% ifconfig hme0 modlist
-    0 arp
-    1 ip
-    2 ipqos
-    3 firewall
-    4 hme
-
-Snoop Support.
-**************
-
-This version includes support for /usr/sbin/snoop. Tests has been done
-on both Solaris 7 and 8. Only IPv4 and IPv6 packets will be sent up to
-stream(s) marked as promiscuous, e.g, snoop et al.
-
-Users will be able to see the packets on the ppp interface by, for example:
-
-    snoop -d ppp0
-
-See the man page for snoop(1M) for details.
-
-IPv6 Support.
-*************
-
-This is for Solaris 8 and later.
-
-This version has been tested under Solaris 8 running IPv6. As of now,
-interoperability testing has only been done between Solaris machines
-in terms of the IPV6 NCP. An additional command line option for the
-pppd daemon has been added: ipv6cp-use-persistent.
-
-By default, compilation for IPv6 support is not enabled.  Uncomment
-the necessary lines in pppd/Makefile.sol2 to enable it. Once done, the
-quickest way to get IPv6 running is to add the following somewhere in
-the command line option:
-
-	+ipv6 ipv6cp-use-persistent
-
-The persistent id for the link-local address was added to conform to
-RFC 2472; such that if there's an EUI-48 available, use that to make
-up the EUI-64.  As of now, the Solaris implementation extracts the
-EUI-48 id from the Ethernet's MAC address (the ethernet interface
-needs to be up).  Future works might support other ways of obtaining a
-unique yet persistent id, such as EEPROM serial numbers, etc.
-
-There need not be any up/down scripts for ipv6, e.g. /etc/ppp/ipv6-up
-or /etc/ppp/ipv6-down, to trigger IPv6 neighbor discovery for auto
-configuration and routing.  The in.ndpd daemon will perform all of the
-necessary jobs in the background. /etc/inet/ndpd.conf can be further
-customized to enable the machine as an IPv6 router. See the man page
-for in.ndpd(1M) and ndpd.conf(4) for details.
-
-Below is a sample output of "ifconfig -a" with persistent link-local
-address.  Note the UNNUMBERED flag is set because hme0 and ppp0 both
-have identical link-local IPv6 addresses:
-
-lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
-        inet 127.0.0.1 netmask ff000000 
-hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
-        inet 129.146.86.248 netmask ffffff00 broadcast 129.146.86.255
-        ether 8:0:20:8d:38:c1 
-lo0: flags=2000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6> mtu 8252 index 1
-        inet6 ::1/128 
-hme0: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
-        ether 8:0:20:8d:38:c1 
-        inet6 fe80::a00:20ff:fe8d:38c1/10 
-hme0:1: flags=2080841<UP,RUNNING,MULTICAST,ADDRCONF,IPv6> mtu 1500 index 2
-        inet6 fec0::56:a00:20ff:fe8d:38c1/64 
-hme0:2: flags=2080841<UP,RUNNING,MULTICAST,ADDRCONF,IPv6> mtu 1500 index 2
-        inet6 2000::56:a00:20ff:fe8d:38c1/64 
-hme0:3: flags=2080841<UP,RUNNING,MULTICAST,ADDRCONF,IPv6> mtu 1500 index 2
-        inet6 2::56:a00:20ff:fe8d:38c1/64 
-ppp0: flags=10008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4> mtu 1500 index 12
-        inet 172.16.1.1 --> 172.16.1.2 netmask ffffff00 
-ppp0: flags=2202851<UP,POINTOPOINT,RUNNING,MULTICAST,UNNUMBERED,NONUD,IPv6> mtu 1500 index 12
-        inet6 fe80::a00:20ff:fe8d:38c1/10 --> fe80::a00:20ff:fe7a:24fb
-
-Note also that a plumbed ipv6 interface stream will exist throughout
-the entire PPP session in the case where the peer rejects IPV6CP,
-which further causes the interface state to stay down. Unplumbing will
-happen when the daemon exits. This is done by design and is not a bug.
-
-64-bit Support.
-***************
-
-This version has been tested under Solaris 7 (and Solaris 8 ) in both
-32- and 64-bits environments (Ultra class machines).  Installing the
-package by executing "make install" will result in additional files
-residing in /kernel/drv/sparcv9 and /kernel/strmod/sparcv9
-subdirectories.
-
-64-bit modules and driver have been compiled and tested using Sun's cc.
-
-Synchronous Serial Support.
-***************************
-
-This version has working but limited support for the on-board
-synchronous HDLC interfaces. It has been tested with the /dev/se_hdlc
-and /dev/zsh drivers.  Synchronous mode was tested with a Cisco
-router.
-
-There ppp daemon does not directly support controlling the serial
-interface.  It relies on the /usr/sbin/syncinit command to initialize
-HDLC mode and clocking.
-
-Some bugs remain: large sized frames are not sent/received properly,
-and may be related to the IP mtu.  This may be due to bugs in pppd
-itself, bugs in Solaris or the serial drivers.  The /dev/zsh driver
-seems more larger and can send/receive larger frames than the
-/dev/se_hdlc driver. There is a confirmed bug with NRZ/NRZI mode in
-the /dev/se_hdlc driver, and Solaris patch 104596-11 is needed to
-correct it. (However this patch seems to introduce other serial
-problems. If you don't apply the patch, the workaround is to change
-the nrzi mode to yes or no, whichever works)
-
-How to start pppd with synchronous support:
-
-#!/bin/sh
-
-local=1.1.1.1   # your ip address here
-baud=38400	# needed, but ignored by serial driver
-
-# Change to the correct serial driver/port
-#dev=/dev/zsh0
-dev=/dev/se_hdlc0
- 
-# Change the driver, nrzi mode, speed and clocking to match your setup
-# This configuration is for external clocking from the DCE
-connect="syncinit se_hdlc0 nrzi=no speed=64000 txc=rxc rxc=rxc"
- 
-/usr/sbin/pppd $dev sync $baud novj noauth $local: connect "$connect"
-
-
-Sample Cisco router config excerpt:
-
-!
-! Cisco router setup as DCE with RS-232 DCE cable
-! 
-!         
-interface Serial0
- ip address 1.1.1.2 255.255.255.0
- encapsulation ppp
- clockrate 64000
- no nrzi-encoding
- no shutdown
-!         
-
diff --git a/mdk-stage1/ppp/README.sunos4 b/mdk-stage1/ppp/README.sunos4
deleted file mode 100644
index b48aec377..000000000
--- a/mdk-stage1/ppp/README.sunos4
+++ /dev/null
@@ -1,62 +0,0 @@
-This file describes the installation process for ppp-2.3 on systems
-running SunOS 4.1.x (or the equivalent).
-
-The STREAMS modules in the sunos4 directory provide kernel support for
-PPP on SunOS 4.1.x systems.  They have been tested under SunOS 4.1.3
-on a SparcStation 1+.  They should work under earlier SunOS 4.1.x
-systems, but no guarantees are given.
-
-These modules are designed to be loaded into the running kernel using
-the `modload' command.
-
-
-Installation.
-*************
-
-1. Run the configure script and make the user-level programs and the
-kernel modules.
-
-	./configure
-	make
-
-If you wish to compile using gcc instead of cc, edit the
-sunos4/Makedefs file and uncomment the line saying "CC = gcc".  You
-can also change the C compiler options by editing the COPTS
-definition.
-
-2. Install the pppd, pppstats and chat programs and the loadable
-module object files (you need to be root to do this):
-
-	make install
-
-By default, the programs and the loadable module object files go into
-/usr/local/etc.  Doing `make install' also copies a script called
-ppp.INSTALL into /dev, and makes ppp.LOAD, ppp.UNLOAD, ppp.MKDEV and
-ppp.RMDEV links to it.  You can change the installation directories by
-editing sunos4/Makedefs.
-
-3. Load the ppp modules (you need to be root for this too):
-
-	/dev/ppp.LOAD
-
-You will want to do this in your /etc/rc.local file once you have
-everything installed.  I suggest you put something like the following
-in /etc/rc.local (or /etc/loadable, if you have one):
-
-	if [ -f /dev/ppp.AUTOLOAD ]; then
-		/dev/ppp.LOAD
-	fi
-
-and then create a /dev/ppp.AUTOLOAD file with the command
-
-	touch /dev/ppp.AUTOLOAD
-
-It is not advisable to unload the "if_ppp" module, because it creates
-network interface units, and SunOS does not provide any way to destroy
-network interfaces once created.  If you do unload it, the system will
-probably crash at some later stage.
-
-If you have previously had ppp-2.2 installed, you may have statements
-in your /etc/rc.local to load the ppp module.  You will need to remove
-those.  Having done this, you will need to reboot to remove the old
-ppp module and load the new modules.
diff --git a/mdk-stage1/ppp/SETUP b/mdk-stage1/ppp/SETUP
deleted file mode 100644
index fb28a2138..000000000
--- a/mdk-stage1/ppp/SETUP
+++ /dev/null
@@ -1,111 +0,0 @@
-		Configuring a PPP link.
-
-After you have compiled and installed this package, there are some
-configuration files which will generally need to be set up.  The
-pppd(8) man page is the best reference for the full details; this file
-outlines the configuration process for the most common case, where
-this package is being used to enable a machine to dial an ISP and
-connect to the internet.  The FAQ and README.linux files also provide
-useful information about setting up PPP.
-
-Dialling an ISP.
-****************
-
-Usually, an ISP will assign an IP address to your machine, and will
-refuse to authenticate itself to you.  Some ISPs require a username
-and password to be entered before PPP service commences, while others
-use PPP authentication (using either the PAP or CHAP protocols).
-
-The recommended way to set up to dial an ISP is for the system
-administrator to create a file under /etc/ppp/peers, named for the ISP
-that you will be dialling.  For example, suppose the file is called
-/etc/ppp/peers/isp.  This file would contain something like this:
-
-cua0		# modem is connected to /dev/cua0
-38400		# run the serial port at 38400 baud
-crtscts		# use hardware flow control
-noauth		# don't require the ISP to authenticate itself
-defaultroute	# use the ISP as our default route
-connect '/usr/sbin/chat -v -f /etc/ppp/chat-isp'
-
-If there are any other pppd options that should apply when calling
-this ISP, they can also be placed in this file.
-
-The /etc/ppp/chat-isp file named in the last line contains the script
-for chat(8) to use to dial the ISP and go through any username/
-password authentication required before PPP service starts.  Here is
-an example (for dialling an Annex terminal server):
-
-ABORT "NO CARRIER"
-ABORT "NO DIALTONE"
-ABORT "ERROR"
-ABORT "NO ANSWER"
-ABORT "BUSY"
-ABORT "Username/Password Incorrect"
-"" "at"
-OK "at&d2&c1"
-OK "atdt2479381"
-"name:" "^Uusername"
-"word:" "\qpassword"
-"annex" "ppp"
-"Switching to PPP-ppp-Switching to PPP"
-
-See the chat(8) man page for details of the script.  If you are not
-sure how the initial dialog with your ISP will go, you could use
-a terminal emulator such as kermit or minicom to go through the
-process manually.
-
-If your ISP requires PAP or CHAP authentication, you will have to
-create a line in /etc/ppp/pap-secrets or /etc/ppp/chap-secrets like
-this:
-
-myhostname	*	"password"
-
-(Replace myhostname with the hostname of your machine.)
-
-At this point, you can initiate the link with the command:
-
-/usr/sbin/pppd call isp
-
-(N.B.: pppd might be installed in a different directory on some
-systems).
-
-This will return to the shell prompt immediately, as pppd will detach
-itself from its controlling terminal.  (If you don't want it to do
-this, use the "nodetach" option.)
-
-Pppd will log messages describing the progress of the connection and
-any errors using the syslog facility (see the syslogd(8) and
-syslog.conf(5) man pages).  Pppd issues messages using syslog facility
-daemon (or local2 if it has been compiled with debugging enabled);
-chat uses facility local2.  It is often useful to see messages of
-priority notice or higher on the console.  To see these, find the line
-in /etc/syslog.conf which has /dev/console on the right-hand side, and
-add `daemon.notice' on the left.  This line should end up something
-like this:
-
-*.err;kern.debug;daemon,local2,auth.notice;mail.crit	/dev/console
-
-If you want to see more messages from pppd, request messages of
-priority info or higher for facility daemon, like this:
-
-*.err;kern.debug;daemon.info;local2,auth.notice;mail.crit  /dev/console
-
-It is also useful to add a line like this:
-
-daemon,local2.debug		/etc/ppp/ppp-log
-
-If you do this, you will need to create an empty /etc/ppp/ppp-log
-file.
-
-After modifying syslog.conf, you will then need to send a HUP signal
-to syslogd (or reboot).
-
-When you wish terminate the PPP link, you should send a TERM or INTR
-signal to pppd.  Pppd writes its process ID to a file called
-ppp<n>.pid in /var/run (or /etc/ppp on older systems such as SunOS or
-Ultrix).  Here <n> is the PPP interface unit number, which will be 0
-unless you have more than one PPP link running simultaneously.  Thus
-you can terminate the link with a command like
-
-	kill `cat /var/run/ppp0.pid`
diff --git a/mdk-stage1/ppp/chat/Makefile.linux b/mdk-stage1/ppp/chat/Makefile.linux
deleted file mode 100644
index 586cbd876..000000000
--- a/mdk-stage1/ppp/chat/Makefile.linux
+++ /dev/null
@@ -1,27 +0,0 @@
-#	$Id$
-
-CDEF1=	-DTERMIOS			# Use the termios structure
-CDEF2=	-DSIGTYPE=void			# Standard definition
-CDEF3=	-UNO_SLEEP			# Use the usleep function
-CDEF4=	-DFNDELAY=O_NDELAY		# Old name value
-CDEFS=	$(CDEF1) $(CDEF2) $(CDEF3) $(CDEF4)
-
-CFLAGS=	$(RPM_OPT_FLAGS) $(CDEFS)
-
-INSTALL= install
-
-all:	chat
-
-chat:	chat.o
-	$(CC) -o chat chat.o
-
-chat.o:	chat.c
-	$(CC) -c $(CFLAGS) -o chat.o chat.c
-
-install: chat
-	mkdir -p $(BINDIR)
-	$(INSTALL) -s -c chat $(BINDIR)
-	$(INSTALL) -c -m 644 chat.8 $(MANDIR)/man8
-
-clean:
-	rm -f chat.o chat *~
diff --git a/mdk-stage1/ppp/chat/Makefile.linux.makeopt b/mdk-stage1/ppp/chat/Makefile.linux.makeopt
deleted file mode 100644
index 974680a93..000000000
--- a/mdk-stage1/ppp/chat/Makefile.linux.makeopt
+++ /dev/null
@@ -1,27 +0,0 @@
-#	$Id$
-
-CDEF1=	-DTERMIOS			# Use the termios structure
-CDEF2=	-DSIGTYPE=void			# Standard definition
-CDEF3=	-UNO_SLEEP			# Use the usleep function
-CDEF4=	-DFNDELAY=O_NDELAY		# Old name value
-CDEFS=	$(CDEF1) $(CDEF2) $(CDEF3) $(CDEF4)
-
-CFLAGS=	-O2 -g -pipe $(CDEFS)
-
-INSTALL= install
-
-all:	chat
-
-chat:	chat.o
-	$(CC) -o chat chat.o
-
-chat.o:	chat.c
-	$(CC) -c $(CFLAGS) -o chat.o chat.c
-
-install: chat
-	mkdir -p $(BINDIR)
-	$(INSTALL) -s -c chat $(BINDIR)
-	$(INSTALL) -c -m 644 chat.8 $(MANDIR)/man8
-
-clean:
-	rm -f chat.o chat *~
diff --git a/mdk-stage1/ppp/chat/Makefile.sol2 b/mdk-stage1/ppp/chat/Makefile.sol2
deleted file mode 100644
index f566cc68b..000000000
--- a/mdk-stage1/ppp/chat/Makefile.sol2
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Makefile for chat on Solaris 2
-#
-
-include ../solaris/Makedefs
-
-CFLAGS = $(COPTS) -DNO_USLEEP -DSOL2
-
-all:	chat
-
-chat: chat.o
-	$(CC) -o chat chat.o
-
-install: chat
-	$(INSTALL) -f $(BINDIR) chat
-	$(INSTALL) -m 444 -f $(MANDIR)/man8 chat.8
-
-clean:
-	rm -f *~ *.o chat
diff --git a/mdk-stage1/ppp/chat/Makefile.sunos4 b/mdk-stage1/ppp/chat/Makefile.sunos4
deleted file mode 100644
index b3507360e..000000000
--- a/mdk-stage1/ppp/chat/Makefile.sunos4
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Makefile for chat on suns
-#
-
-include ../sunos4/Makedefs
-
-CFLAGS = -DSUNOS $(COPTS)
-
-all:	chat
-
-chat: chat.o
-	$(CC) -o chat chat.o
-
-install: chat
-	$(INSTALL) -c chat $(BINDIR)/chat
-	$(INSTALL) -c -m 444 chat.8 $(MANDIR)/man8/chat.8
-
-clean:
-	rm -f *~ *.o chat
diff --git a/mdk-stage1/ppp/chat/chat.8 b/mdk-stage1/ppp/chat/chat.8
deleted file mode 100644
index 8d2029609..000000000
--- a/mdk-stage1/ppp/chat/chat.8
+++ /dev/null
@@ -1,515 +0,0 @@
-.\" -*- nroff -*-
-.\" manual page [] for chat 1.8
-.\" $Id$
-.\" SH section heading
-.\" SS subsection heading
-.\" LP paragraph
-.\" IP indented paragraph
-.\" TP hanging label
-.TH CHAT 8 "22 May 1999" "Chat Version 1.22"
-.SH NAME
-chat \- Automated conversational script with a modem
-.SH SYNOPSIS
-.B chat
-[
-.I options
-]
-.I script
-.SH DESCRIPTION
-.LP
-The \fIchat\fR program defines a conversational exchange between the
-computer and the modem. Its primary purpose is to establish the
-connection between the Point-to-Point Protocol Daemon (\fIpppd\fR) and
-the remote's \fIpppd\fR process.
-.SH OPTIONS
-.TP
-.B -f \fI<chat file>
-Read the chat script from the chat \fIfile\fR. The use of this option
-is mutually exclusive with the chat script parameters. The user must
-have read access to the file. Multiple lines are permitted in the
-file. Space or horizontal tab characters should be used to separate
-the strings.
-.TP
-.B -t \fI<timeout>
-Set the timeout for the expected string to be received. If the string
-is not received within the time limit then the reply string is not
-sent. An alternate reply may be sent or the script will fail if there
-is no alternate reply string. A failed script will cause the
-\fIchat\fR program to terminate with a non-zero error code.
-.TP
-.B -r \fI<report file>
-Set the file for output of the report strings. If you use the keyword
-\fIREPORT\fR, the resulting strings are written to this file. If this
-option is not used and you still use \fIREPORT\fR keywords, the
-\fIstderr\fR file is used for the report strings.
-.TP
-.B -e
-Start with the echo option turned on. Echoing may also be turned on
-or off at specific points in the chat script by using the \fIECHO\fR
-keyword. When echoing is enabled, all output from the modem is echoed
-to \fIstderr\fR.
-.TP
-.B -E
-Enables environment variable substituion within chat scripts using the
-standard \fI$xxx\fR syntax.
-.TP
-.B -v
-Request that the \fIchat\fR script be executed in a verbose mode. The
-\fIchat\fR program will then log the execution state of the chat
-script as well as all text received from the modem and the output
-strings sent to the modem.  The default is to log through the SYSLOG;
-the logging method may be altered with the -S and -s flags.
-.TP
-.B -V
-Request that the \fIchat\fR script be executed in a stderr verbose
-mode. The \fIchat\fR program will then log all text received from the
-modem and the output strings sent to the modem to the stderr device. This
-device is usually the local console at the station running the chat or
-pppd program.
-.TP
-.B -s
-Use stderr.  All log messages from '-v' and all error messages will be
-sent to stderr.
-.TP
-.B -S
-Do not use the SYSLOG.  By default, error messages are sent to the
-SYSLOG.  The use of -S will prevent both log messages from '-v' and
-error messages from being sent to the SYSLOG.
-.TP
-.B -T \fI<phone number>
-Pass in an arbitary string, usually a phone number, that will be
-substituted for the \\T substitution metacharacter in a send string.
-.TP
-.B -U \fI<phone number 2>
-Pass in a second string, usually a phone number, that will be
-substituted for the \\U substitution metacharacter in a send string.
-This is useful when dialing an ISDN terminal adapter that requires two 
-numbers.
-.TP
-.B script
-If the script is not specified in a file with the \fI-f\fR option then
-the script is included as parameters to the \fIchat\fR program.
-.SH CHAT SCRIPT
-.LP
-The \fIchat\fR script defines the communications.
-.LP
-A script consists of one or more "expect-send" pairs of strings,
-separated by spaces, with an optional "subexpect-subsend" string pair,
-separated by a dash as in the following example:
-.IP
-ogin:-BREAK-ogin: ppp ssword: hello2u2
-.LP
-This line indicates that the \fIchat\fR program should expect the string
-"ogin:". If it fails to receive a login prompt within the time interval
-allotted, it is to send a break sequence to the remote and then expect the
-string "ogin:". If the first "ogin:" is received then the break sequence is
-not generated.
-.LP
-Once it received the login prompt the \fIchat\fR program will send the
-string ppp and then expect the prompt "ssword:". When it receives the
-prompt for the password, it will send the password hello2u2.
-.LP
-A carriage return is normally sent following the reply string. It is not
-expected in the "expect" string unless it is specifically requested by using
-the \\r character sequence.
-.LP
-The expect sequence should contain only what is needed to identify the
-string. Since it is normally stored on a disk file, it should not contain
-variable information. It is generally not acceptable to look for time
-strings, network identification strings, or other variable pieces of data as
-an expect string.
-.LP
-To help correct for characters which may be corrupted during the initial
-sequence, look for the string "ogin:" rather than "login:". It is possible
-that the leading "l" character may be received in error and you may never
-find the string even though it was sent by the system. For this reason,
-scripts look for "ogin:" rather than "login:" and "ssword:" rather than
-"password:".
-.LP
-A very simple script might look like this:
-.IP
-ogin: ppp ssword: hello2u2
-.LP
-In other words, expect ....ogin:, send ppp, expect ...ssword:, send hello2u2.
-.LP
-In actual practice, simple scripts are rare. At the vary least, you
-should include sub-expect sequences should the original string not be
-received. For example, consider the following script:
-.IP
-ogin:--ogin: ppp ssword: hello2u2
-.LP
-This would be a better script than the simple one used earlier. This would look
-for the same login: prompt, however, if one was not received, a single
-return sequence is sent and then it will look for login: again. Should line
-noise obscure the first login prompt then sending the empty line will
-usually generate a login prompt again.
-.SH COMMENTS
-Comments can be embedded in the chat script. A comment is a line which
-starts with the \fB#\fR (hash) character in column 1. Such comment
-lines are just ignored by the chat program. If a '#' character is to
-be expected as the first character of the expect sequence, you should
-quote the expect string.
-If you want to wait for a prompt that starts with a # (hash)
-character, you would have to write something like this:
-.IP
-# Now wait for the prompt and send logout string
-.br
-\'# ' logout
-.LP
-
-.SH SENDING DATA FROM A FILE
-If the string to send starts with an at sign (@), the rest of the
-string is taken to be the name of a file to read to get the string to
-send.  If the last character of the data read is a newline, it is
-removed.  The file can be a named pipe (or fifo) instead of a regular
-file.  This provides a way for \fBchat\fR to communicate with another
-program, for example, a program to prompt the user and receive a
-password typed in.
-.LP
-
-.SH ABORT STRINGS
-Many modems will report the status of the call as a string. These
-strings may be \fBCONNECTED\fR or \fBNO CARRIER\fR or \fBBUSY\fR. It
-is often desirable to terminate the script should the modem fail to
-connect to the remote. The difficulty is that a script would not know
-exactly which modem string it may receive. On one attempt, it may
-receive \fBBUSY\fR while the next time it may receive \fBNO CARRIER\fR.
-.LP
-These "abort" strings may be specified in the script using the \fIABORT\fR
-sequence. It is written in the script as in the following example:
-.IP
-ABORT BUSY ABORT 'NO CARRIER' '' ATZ OK ATDT5551212 CONNECT
-.LP
-This sequence will expect nothing; and then send the string ATZ. The
-expected response to this is the string \fIOK\fR. When it receives \fIOK\fR,
-the string ATDT5551212 to dial the telephone. The expected string is
-\fICONNECT\fR. If the string \fICONNECT\fR is received the remainder of the
-script is executed. However, should the modem find a busy telephone, it will
-send the string \fIBUSY\fR. This will cause the string to match the abort
-character sequence. The script will then fail because it found a match to
-the abort string. If it received the string \fINO CARRIER\fR, it will abort
-for the same reason. Either string may be received. Either string will
-terminate the \fIchat\fR script.
-.SH CLR_ABORT STRINGS
-This sequence allows for clearing previously set \fBABORT\fR strings.
-\fBABORT\fR strings are kept in an array of a pre-determined size (at
-compilation time); \fBCLR_ABORT\fR will reclaim the space for cleared
-entries so that new strings can use that space.
-.SH SAY STRINGS
-The \fBSAY\fR directive allows the script to send strings to the user
-at the terminal via standard error.  If \fBchat\fR is being run by
-pppd, and pppd is running as a daemon (detached from its controlling
-terminal), standard error will normally be redirected to the file
-/etc/ppp/connect-errors.
-.LP
-\fBSAY\fR strings must be enclosed in single or double quotes. If
-carriage return and line feed are needed in the string to be output,
-you must explicitely add them to your string.
-.LP
-The SAY strings could be used to give progress messages in sections of
-the script where you want to have 'ECHO OFF' but still let the user
-know what is happening.  An example is:
-.IP
-ABORT BUSY 
-.br
-ECHO OFF 
-.br
-SAY "Dialling your ISP...\\n" 
-.br
-\'' ATDT5551212 
-.br
-TIMEOUT 120
-.br
-SAY "Waiting up to 2 minutes for connection ... "
-.br
-CONNECT '' 
-.br
-SAY "Connected, now logging in ...\n"
-.br
-ogin: account
-.br
-ssword: pass
-.br
-$ \c
-SAY "Logged in OK ...\n"
-\fIetc ...\fR
-.LP
-This sequence will only present the SAY strings to the user and all
-the details of the script will remain hidden. For example, if the
-above script works, the user will see:
-.IP
-Dialling your ISP...
-.br
-Waiting up to 2 minutes for connection ... Connected, now logging in ...
-.br
-Logged in OK ...
-.LP
-
-.SH REPORT STRINGS
-A \fBreport\fR string is similar to the ABORT string. The difference
-is that the strings, and all characters to the next control character
-such as a carriage return, are written to the report file.
-.LP
-The report strings may be used to isolate the transmission rate of the
-modem's connect string and return the value to the chat user. The
-analysis of the report string logic occurs in conjunction with the
-other string processing such as looking for the expect string. The use
-of the same string for a report and abort sequence is probably not
-very useful, however, it is possible.
-.LP
-The report strings to no change the completion code of the program.
-.LP
-These "report" strings may be specified in the script using the \fIREPORT\fR
-sequence. It is written in the script as in the following example:
-.IP
-REPORT CONNECT ABORT BUSY '' ATDT5551212 CONNECT '' ogin: account
-.LP
-This sequence will expect nothing; and then send the string
-ATDT5551212 to dial the telephone. The expected string is
-\fICONNECT\fR. If the string \fICONNECT\fR is received the remainder
-of the script is executed. In addition the program will write to the
-expect-file the string "CONNECT" plus any characters which follow it
-such as the connection rate.
-.SH CLR_REPORT STRINGS
-This sequence allows for clearing previously set \fBREPORT\fR strings.
-\fBREPORT\fR strings are kept in an array of a pre-determined size (at
-compilation time); \fBCLR_REPORT\fR will reclaim the space for cleared
-entries so that new strings can use that space.
-.SH ECHO
-The echo options controls whether the output from the modem is echoed
-to \fIstderr\fR. This option may be set with the \fI-e\fR option, but
-it can also be controlled by the \fIECHO\fR keyword. The "expect-send"
-pair \fIECHO\fR \fION\fR enables echoing, and \fIECHO\fR \fIOFF\fR
-disables it. With this keyword you can select which parts of the
-conversation should be visible. For instance, with the following
-script:
-.IP
-ABORT   'BUSY'
-.br
-ABORT   'NO CARRIER'
-.br
-''      ATZ
-.br
-OK\\r\\n  ATD1234567
-.br
-\\r\\n    \\c
-.br
-ECHO    ON
-.br
-CONNECT \\c
-.br
-ogin:   account
-.LP
-all output resulting from modem configuration and dialing is not visible,
-but starting with the \fICONNECT\fR (or \fIBUSY\fR) message, everything
-will be echoed.
-.SH HANGUP
-The HANGUP options control whether a modem hangup should be considered
-as an error or not.  This option is useful in scripts for dialling
-systems which will hang up and call your system back.  The HANGUP
-options can be \fBON\fR or \fBOFF\fR.
-.br
-When HANGUP is set OFF and the modem hangs up (e.g., after the first
-stage of logging in to a callback system), \fBchat\fR will continue
-running the script (e.g., waiting for the incoming call and second
-stage login prompt). As soon as the incoming call is connected, you
-should use the \fBHANGUP ON\fR directive to reinstall normal hang up
-signal behavior.  Here is an (simple) example script:
-.IP
-ABORT   'BUSY'
-.br
-''      ATZ
-.br
-OK\\r\\n  ATD1234567
-.br
-\\r\\n    \\c
-.br
-CONNECT \\c
-.br
-\'Callback login:' call_back_ID
-.br
-HANGUP OFF
-.br
-ABORT "Bad Login"
-.br
-\'Callback Password:' Call_back_password
-.br
-TIMEOUT 120
-.br
-CONNECT \\c
-.br
-HANGUP ON
-.br
-ABORT "NO CARRIER"
-.br
-ogin:--BREAK--ogin: real_account
-.br
-\fIetc ...\fR
-.LP
-.SH TIMEOUT
-The initial timeout value is 45 seconds. This may be changed using the \fB-t\fR
-parameter.
-.LP
-To change the timeout value for the next expect string, the following
-example may be used:
-.IP
-ATZ OK ATDT5551212 CONNECT TIMEOUT 10 ogin:--ogin: TIMEOUT 5 assword: hello2u2
-.LP
-This will change the timeout to 10 seconds when it expects the login:
-prompt. The timeout is then changed to 5 seconds when it looks for the
-password prompt.
-.LP
-The timeout, once changed, remains in effect until it is changed again.
-.SH SENDING EOT
-The special reply string of \fIEOT\fR indicates that the chat program
-should send an EOT character to the remote. This is normally the
-End-of-file character sequence. A return character is not sent
-following the EOT.
-.PR
-The EOT sequence may be embedded into the send string using the
-sequence \fI^D\fR.
-.SH GENERATING BREAK
-The special reply string of \fIBREAK\fR will cause a break condition
-to be sent. The break is a special signal on the transmitter. The
-normal processing on the receiver is to change the transmission rate.
-It may be used to cycle through the available transmission rates on
-the remote until you are able to receive a valid login prompt.
-.PR
-The break sequence may be embedded into the send string using the
-\fI\\K\fR sequence.
-.SH ESCAPE SEQUENCES
-The expect and reply strings may contain escape sequences. All of the
-sequences are legal in the reply string. Many are legal in the expect.
-Those which are not valid in the expect sequence are so indicated.
-.TP
-.B ''
-Expects or sends a null string. If you send a null string then it will still
-send the return character. This sequence may either be a pair of apostrophe
-or quote characters.
-.TP
-.B \\\\b
-represents a backspace character.
-.TP
-.B \\\\c
-Suppresses the newline at the end of the reply string. This is the only
-method to send a string without a trailing return character. It must
-be at the end of the send string. For example,
-the sequence hello\\c will simply send the characters h, e, l, l, o.
-.I (not valid in expect.)
-.TP
-.B \\\\d
-Delay for one second. The program uses sleep(1) which will delay to a
-maximum of one second.
-.I (not valid in expect.)
-.TP
-.B \\\\K
-Insert a BREAK
-.I (not valid in expect.)
-.TP
-.B \\\\n
-Send a newline or linefeed character.
-.TP
-.B \\\\N
-Send a null character. The same sequence may be represented by \\0.
-.I (not valid in expect.)
-.TP
-.B \\\\p
-Pause for a fraction of a second. The delay is 1/10th of a second.
-.I (not valid in expect.)
-.TP
-.B \\\\q
-Suppress writing the string to the SYSLOG file. The string ?????? is
-written to the log in its place.
-.I (not valid in expect.)
-.TP
-.B \\\\r
-Send or expect a carriage return.
-.TP
-.B \\\\s
-Represents a space character in the string. This may be used when it
-is not desirable to quote the strings which contains spaces. The
-sequence 'HI TIM' and HI\\sTIM are the same.
-.TP
-.B \\\\t
-Send or expect a tab character.
-.TP
-.B \\\\T
-Send the phone number string as specified with the \fI-T\fR option
-.I (not valid in expect.)
-.TP
-.B \\\\U
-Send the phone number 2 string as specified with the \fI-U\fR option
-.I (not valid in expect.)
-.TP
-.B \\\\\\\\
-Send or expect a backslash character.
-.TP
-.B \\\\ddd
-Collapse the octal digits (ddd) into a single ASCII character and send that
-character.
-.I (some characters are not valid in expect.)
-.TP
-.B \^^C
-Substitute the sequence with the control character represented by C.
-For example, the character DC1 (17) is shown as \^^Q.
-.I (some characters are not valid in expect.)
-.SH ENVIRONMENT VARIABLES
-Environment variables are available within chat scripts, if  the \fI-E\fR
-option was specified in the command line. The metacharacter \fI$\fR is used
-to introduce the name of the environment variable to substitute. If the
-substition fails, because the requested environment variable is not set,
-\fInothing\fR is replaced for the variable.
-.SH TERMINATION CODES
-The \fIchat\fR program will terminate with the following completion
-codes.
-.TP
-.B 0
-The normal termination of the program. This indicates that the script
-was executed without error to the normal conclusion.
-.TP
-.B 1
-One or more of the parameters are invalid or an expect string was too
-large for the internal buffers. This indicates that the program as not
-properly executed.
-.TP
-.B 2
-An error occurred during the execution of the program. This may be due
-to a read or write operation failing for some reason or chat receiving
-a signal such as SIGINT.
-.TP
-.B 3
-A timeout event occurred when there was an \fIexpect\fR string without
-having a "-subsend" string. This may mean that you did not program the
-script correctly for the condition or that some unexpected event has
-occurred and the expected string could not be found.
-.TP
-.B 4
-The first string marked as an \fIABORT\fR condition occurred.
-.TP
-.B 5
-The second string marked as an \fIABORT\fR condition occurred.
-.TP
-.B 6
-The third string marked as an \fIABORT\fR condition occurred.
-.TP
-.B 7
-The fourth string marked as an \fIABORT\fR condition occurred.
-.TP
-.B ...
-The other termination codes are also strings marked as an \fIABORT\fR
-condition.
-.LP
-Using the termination code, it is possible to determine which event
-terminated the script. It is possible to decide if the string "BUSY"
-was received from the modem as opposed to "NO DIAL TONE". While the
-first event may be retried, the second will probably have little
-chance of succeeding during a retry.
-.SH SEE ALSO
-Additional information about \fIchat\fR scripts may be found with UUCP
-documentation. The \fIchat\fR script was taken from the ideas proposed
-by the scripts used by the \fIuucico\fR program.
-.LP
-uucico(1), uucp(1)
-.SH COPYRIGHT
-The \fIchat\fR program is in public domain. This is not the GNU public
-license. If it breaks then you get to keep both pieces.
diff --git a/mdk-stage1/ppp/chat/chat.c b/mdk-stage1/ppp/chat/chat.c
deleted file mode 100644
index 1b22907a8..000000000
--- a/mdk-stage1/ppp/chat/chat.c
+++ /dev/null
@@ -1,1756 +0,0 @@
-/*
- *	Chat -- a program for automatic session establishment (i.e. dial
- *		the phone and log in).
- *
- * Standard termination codes:
- *  0 - successful completion of the script
- *  1 - invalid argument, expect string too large, etc.
- *  2 - error on an I/O operation or fatal error condition.
- *  3 - timeout waiting for a simple string.
- *  4 - the first string declared as "ABORT"
- *  5 - the second string declared as "ABORT"
- *  6 - ... and so on for successive ABORT strings.
- *
- *	This software is in the public domain.
- *
- * -----------------
- *	22-May-99 added environment substitutuion, enabled with -E switch.
- *	Andreas Arens <andras@cityweb.de>.
- *
- *	12-May-99 added a feature to read data to be sent from a file,
- *	if the send string starts with @.  Idea from gpk <gpk@onramp.net>.
- *
- *	added -T and -U option and \T and \U substitution to pass a phone
- *	number into chat script. Two are needed for some ISDN TA applications.
- *	Keith Dart <kdart@cisco.com>
- *	
- *
- *	Added SAY keyword to send output to stderr.
- *      This allows to turn ECHO OFF and to output specific, user selected,
- *      text to give progress messages. This best works when stderr
- *      exists (i.e.: pppd in nodetach mode).
- *
- * 	Added HANGUP directives to allow for us to be called
- *      back. When HANGUP is set to NO, chat will not hangup at HUP signal.
- *      We rely on timeouts in that case.
- *
- *      Added CLR_ABORT to clear previously set ABORT string. This has been
- *      dictated by the HANGUP above as "NO CARRIER" (for example) must be
- *      an ABORT condition until we know the other host is going to close
- *      the connection for call back. As soon as we have completed the
- *      first stage of the call back sequence, "NO CARRIER" is a valid, non
- *      fatal string. As soon as we got called back (probably get "CONNECT"),
- *      we should re-arm the ABORT "NO CARRIER". Hence the CLR_ABORT command.
- *      Note that CLR_ABORT packs the abort_strings[] array so that we do not
- *      have unused entries not being reclaimed.
- *
- *      In the same vein as above, added CLR_REPORT keyword.
- *
- *      Allow for comments. Line starting with '#' are comments and are
- *      ignored. If a '#' is to be expected as the first character, the 
- *      expect string must be quoted.
- *
- *
- *		Francis Demierre <Francis@SwissMail.Com>
- * 		Thu May 15 17:15:40 MET DST 1997
- *
- *
- *      Added -r "report file" switch & REPORT keyword.
- *              Robert Geer <bgeer@xmission.com>
- *
- *      Added -s "use stderr" and -S "don't use syslog" switches.
- *              June 18, 1997
- *              Karl O. Pinc <kop@meme.com>
- *
- *
- *	Added -e "echo" switch & ECHO keyword
- *		Dick Streefland <dicks@tasking.nl>
- *
- *
- *	Considerable updates and modifications by
- *		Al Longyear <longyear@pobox.com>
- *		Paul Mackerras <paulus@cs.anu.edu.au>
- *
- *
- *	The original author is:
- *
- *		Karl Fox <karl@MorningStar.Com>
- *		Morning Star Technologies, Inc.
- *		1760 Zollinger Road
- *		Columbus, OH  43221
- *		(614)451-1883
- *
- */
-
-#ifndef __STDC__
-#define const
-#endif
-
-#ifndef lint
-static const char rcsid[] = "$Id$";
-#endif
-
-#include <stdio.h>
-#include <ctype.h>
-#include <time.h>
-#include <fcntl.h>
-#include <signal.h>
-#include <errno.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <syslog.h>
-
-#ifndef TERMIO
-#undef	TERMIOS
-#define TERMIOS
-#endif
-
-#ifdef TERMIO
-#include <termio.h>
-#endif
-#ifdef TERMIOS
-#include <termios.h>
-#endif
-
-#define	STR_LEN	1024
-
-#ifndef SIGTYPE
-#define SIGTYPE void
-#endif
-
-#undef __P
-#undef __V
-
-#ifdef __STDC__
-#include <stdarg.h>
-#define __V(x)	x
-#define __P(x)	x
-#else
-#include <varargs.h>
-#define __V(x)	(va_alist) va_dcl
-#define __P(x)	()
-#define const
-#endif
-
-#ifndef O_NONBLOCK
-#define O_NONBLOCK	O_NDELAY
-#endif
-
-#ifdef SUNOS
-extern int sys_nerr;
-extern char *sys_errlist[];
-#define memmove(to, from, n)	bcopy(from, to, n)
-#define strerror(n)		((unsigned)(n) < sys_nerr? sys_errlist[(n)] :\
-				 "unknown error")
-#endif
-
-/*************** Micro getopt() *********************************************/
-#define	OPTION(c,v)	(_O&2&&**v?*(*v)++:!c||_O&4?0:(!(_O&1)&& \
-				(--c,++v),_O=4,c&&**v=='-'&&v[0][1]?*++*v=='-'\
-				&&!v[0][1]?(--c,++v,0):(_O=2,*(*v)++):0))
-#define	OPTARG(c,v)	(_O&2?**v||(++v,--c)?(_O=1,--c,*v++): \
-				(_O=4,(char*)0):(char*)0)
-#define	OPTONLYARG(c,v)	(_O&2&&**v?(_O=1,--c,*v++):(char*)0)
-#define	ARG(c,v)	(c?(--c,*v++):(char*)0)
-
-static int _O = 0;		/* Internal state */
-/*************** Micro getopt() *********************************************/
-
-char *program_name;
-
-#define	MAX_ABORTS		50
-#define	MAX_REPORTS		50
-#define	DEFAULT_CHAT_TIMEOUT	45
-
-int echo          = 0;
-int verbose       = 0;
-int to_log        = 1;
-int to_stderr     = 0;
-int Verbose       = 0;
-int quiet         = 0;
-int report        = 0;
-int use_env       = 0;
-int exit_code     = 0;
-FILE* report_fp   = (FILE *) 0;
-char *report_file = (char *) 0;
-char *chat_file   = (char *) 0;
-char *phone_num   = (char *) 0;
-char *phone_num2  = (char *) 0;
-int timeout       = DEFAULT_CHAT_TIMEOUT;
-
-int have_tty_parameters = 0;
-
-#ifdef TERMIO
-#define term_parms struct termio
-#define get_term_param(param) ioctl(0, TCGETA, param)
-#define set_term_param(param) ioctl(0, TCSETA, param)
-struct termio saved_tty_parameters;
-#endif
-
-#ifdef TERMIOS
-#define term_parms struct termios
-#define get_term_param(param) tcgetattr(0, param)
-#define set_term_param(param) tcsetattr(0, TCSANOW, param)
-struct termios saved_tty_parameters;
-#endif
-
-char *abort_string[MAX_ABORTS], *fail_reason = (char *)0,
-	fail_buffer[50];
-int n_aborts = 0, abort_next = 0, timeout_next = 0, echo_next = 0;
-int clear_abort_next = 0;
-
-char *report_string[MAX_REPORTS] ;
-char  report_buffer[50] ;
-int n_reports = 0, report_next = 0, report_gathering = 0 ; 
-int clear_report_next = 0;
-
-int say_next = 0, hup_next = 0;
-
-void *dup_mem __P((void *b, size_t c));
-void *copy_of __P((char *s));
-void usage __P((void));
-void logf __P((const char *fmt, ...));
-void fatal __P((int code, const char *fmt, ...));
-SIGTYPE sigalrm __P((int signo));
-SIGTYPE sigint __P((int signo));
-SIGTYPE sigterm __P((int signo));
-SIGTYPE sighup __P((int signo));
-void unalarm __P((void));
-void init __P((void));
-void set_tty_parameters __P((void));
-void echo_stderr __P((int));
-void break_sequence __P((void));
-void terminate __P((int status));
-void do_file __P((char *chat_file));
-int  get_string __P((register char *string));
-int  put_string __P((register char *s));
-int  write_char __P((int c));
-int  put_char __P((int c));
-int  get_char __P((void));
-void chat_send __P((register char *s));
-char *character __P((int c));
-void chat_expect __P((register char *s));
-char *clean __P((register char *s, int sending));
-void break_sequence __P((void));
-void terminate __P((int status));
-void pack_array __P((char **array, int end));
-char *expect_strtok __P((char *, char *));
-int vfmtmsg __P((char *, int, const char *, va_list));	/* vsprintf++ */
-
-int main __P((int, char *[]));
-
-void *dup_mem(b, c)
-void *b;
-size_t c;
-{
-    void *ans = malloc (c);
-    if (!ans)
-	fatal(2, "memory error!");
-
-    memcpy (ans, b, c);
-    return ans;
-}
-
-void *copy_of (s)
-char *s;
-{
-    return dup_mem (s, strlen (s) + 1);
-}
-
-/*
- * chat [ -v ] [ -E ] [ -T number ] [ -U number ] [ -t timeout ] [ -f chat-file ] \
- * [ -r report-file ] \
- *		[...[[expect[-say[-expect...]] say expect[-say[-expect]] ...]]]
- *
- *	Perform a UUCP-dialer-like chat script on stdin and stdout.
- */
-int
-main(argc, argv)
-     int argc;
-     char **argv;
-{
-    int option;
-    char *arg;
-
-    program_name = *argv;
-    tzset();
-
-    while ((option = OPTION(argc, argv)) != 0) {
-	switch (option) {
-	case 'e':
-	    ++echo;
-	    break;
-
-	case 'E':
-	    ++use_env;
-	    break;
-
-	case 'v':
-	    ++verbose;
-	    break;
-
-	case 'V':
-	    ++Verbose;
-	    break;
-
-	case 's':
-	    ++to_stderr;
-	    break;
-
-	case 'S':
-	    to_log = 0;
-	    break;
-
-	case 'f':
-	    if ((arg = OPTARG(argc, argv)) != NULL)
-		    chat_file = copy_of(arg);
-	    else
-		usage();
-	    break;
-
-	case 't':
-	    if ((arg = OPTARG(argc, argv)) != NULL)
-		timeout = atoi(arg);
-	    else
-		usage();
-	    break;
-
-	case 'r':
-	    arg = OPTARG (argc, argv);
-	    if (arg) {
-		if (report_fp != NULL)
-		    fclose (report_fp);
-		report_file = copy_of (arg);
-		report_fp   = fopen (report_file, "a");
-		if (report_fp != NULL) {
-		    if (verbose)
-			fprintf (report_fp, "Opening \"%s\"...\n",
-				 report_file);
-		    report = 1;
-		}
-	    }
-	    break;
-
-	case 'T':
-	    if ((arg = OPTARG(argc, argv)) != NULL)
-		phone_num = copy_of(arg);
-	    else
-		usage();
-	    break;
-
-	case 'U':
-	    if ((arg = OPTARG(argc, argv)) != NULL)
-		phone_num2 = copy_of(arg);
-	    else
-		usage();
-	    break;
-
-	default:
-	    usage();
-	    break;
-	}
-    }
-/*
- * Default the report file to the stderr location
- */
-    if (report_fp == NULL)
-	report_fp = stderr;
-
-    if (to_log) {
-#ifdef ultrix
-	openlog("chat", LOG_PID);
-#else
-	openlog("chat", LOG_PID | LOG_NDELAY, LOG_LOCAL2);
-
-	if (verbose)
-	    setlogmask(LOG_UPTO(LOG_INFO));
-	else
-	    setlogmask(LOG_UPTO(LOG_WARNING));
-#endif
-    }
-
-    init();
-    
-    if (chat_file != NULL) {
-	arg = ARG(argc, argv);
-	if (arg != NULL)
-	    usage();
-	else
-	    do_file (chat_file);
-    } else {
-	while ((arg = ARG(argc, argv)) != NULL) {
-	    chat_expect(arg);
-
-	    if ((arg = ARG(argc, argv)) != NULL)
-		chat_send(arg);
-	}
-    }
-
-    terminate(0);
-    return 0;
-}
-
-/*
- *  Process a chat script when read from a file.
- */
-
-void do_file (chat_file)
-char *chat_file;
-{
-    int linect, sendflg;
-    char *sp, *arg, quote;
-    char buf [STR_LEN];
-    FILE *cfp;
-
-    cfp = fopen (chat_file, "r");
-    if (cfp == NULL)
-	fatal(1, "%s -- open failed: %m", chat_file);
-
-    linect = 0;
-    sendflg = 0;
-
-    while (fgets(buf, STR_LEN, cfp) != NULL) {
-	sp = strchr (buf, '\n');
-	if (sp)
-	    *sp = '\0';
-
-	linect++;
-	sp = buf;
-
-        /* lines starting with '#' are comments. If a real '#'
-           is to be expected, it should be quoted .... */
-        if ( *sp == '#' )
-	    continue;
-
-	while (*sp != '\0') {
-	    if (*sp == ' ' || *sp == '\t') {
-		++sp;
-		continue;
-	    }
-
-	    if (*sp == '"' || *sp == '\'') {
-		quote = *sp++;
-		arg = sp;
-		while (*sp != quote) {
-		    if (*sp == '\0')
-			fatal(1, "unterminated quote (line %d)", linect);
-
-		    if (*sp++ == '\\') {
-			if (*sp != '\0')
-			    ++sp;
-		    }
-		}
-	    }
-	    else {
-		arg = sp;
-		while (*sp != '\0' && *sp != ' ' && *sp != '\t')
-		    ++sp;
-	    }
-
-	    if (*sp != '\0')
-		*sp++ = '\0';
-
-	    if (sendflg)
-		chat_send (arg);
-	    else
-		chat_expect (arg);
-	    sendflg = !sendflg;
-	}
-    }
-    fclose (cfp);
-}
-
-/*
- *	We got an error parsing the command line.
- */
-void usage()
-{
-    fprintf(stderr, "\
-Usage: %s [-e] [-E] [-v] [-V] [-t timeout] [-r report-file]\n\
-     [-T phone-number] [-U phone-number2] {-f chat-file | chat-script}\n", program_name);
-    exit(1);
-}
-
-char line[1024];
-
-/*
- * Send a message to syslog and/or stderr.
- */
-void logf __V((const char *fmt, ...))
-{
-    va_list args;
-
-#ifdef __STDC__
-    va_start(args, fmt);
-#else
-    char *fmt;
-    va_start(args);
-    fmt = va_arg(args, char *);
-#endif
-
-    vfmtmsg(line, sizeof(line), fmt, args);
-    if (to_log)
-	syslog(LOG_INFO, "%s", line);
-    if (to_stderr)
-	fprintf(stderr, "%s\n", line);
-}
-
-/*
- *	Print an error message and terminate.
- */
-
-void fatal __V((int code, const char *fmt, ...))
-{
-    va_list args;
-
-#ifdef __STDC__
-    va_start(args, fmt);
-#else
-    int code;
-    char *fmt;
-    va_start(args);
-    code = va_arg(args, int);
-    fmt = va_arg(args, char *);
-#endif
-
-    vfmtmsg(line, sizeof(line), fmt, args);
-    if (to_log)
-	syslog(LOG_ERR, "%s", line);
-    if (to_stderr)
-	fprintf(stderr, "%s\n", line);
-    terminate(code);
-}
-
-int alarmed = 0;
-
-SIGTYPE sigalrm(signo)
-int signo;
-{
-    int flags;
-
-    alarm(1);
-    alarmed = 1;		/* Reset alarm to avoid race window */
-    signal(SIGALRM, sigalrm);	/* that can cause hanging in read() */
-
-    if ((flags = fcntl(0, F_GETFL, 0)) == -1)
-	fatal(2, "Can't get file mode flags on stdin: %m");
-
-    if (fcntl(0, F_SETFL, flags | O_NONBLOCK) == -1)
-	fatal(2, "Can't set file mode flags on stdin: %m");
-
-    if (verbose)
-	logf("alarm");
-}
-
-void unalarm()
-{
-    int flags;
-
-    if ((flags = fcntl(0, F_GETFL, 0)) == -1)
-	fatal(2, "Can't get file mode flags on stdin: %m");
-
-    if (fcntl(0, F_SETFL, flags & ~O_NONBLOCK) == -1)
-	fatal(2, "Can't set file mode flags on stdin: %m");
-}
-
-SIGTYPE sigint(signo)
-int signo;
-{
-    fatal(2, "SIGINT");
-}
-
-SIGTYPE sigterm(signo)
-int signo;
-{
-    fatal(2, "SIGTERM");
-}
-
-SIGTYPE sighup(signo)
-int signo;
-{
-    fatal(2, "SIGHUP");
-}
-
-void init()
-{
-    signal(SIGINT, sigint);
-    signal(SIGTERM, sigterm);
-    signal(SIGHUP, sighup);
-
-    set_tty_parameters();
-    signal(SIGALRM, sigalrm);
-    alarm(0);
-    alarmed = 0;
-}
-
-void set_tty_parameters()
-{
-#if defined(get_term_param)
-    term_parms t;
-
-    if (get_term_param (&t) < 0)
-	fatal(2, "Can't get terminal parameters: %m");
-
-    saved_tty_parameters = t;
-    have_tty_parameters  = 1;
-
-    t.c_iflag     |= IGNBRK | ISTRIP | IGNPAR;
-    t.c_oflag      = 0;
-    t.c_lflag      = 0;
-    t.c_cc[VERASE] =
-    t.c_cc[VKILL]  = 0;
-    t.c_cc[VMIN]   = 1;
-    t.c_cc[VTIME]  = 0;
-
-    if (set_term_param (&t) < 0)
-	fatal(2, "Can't set terminal parameters: %m");
-#endif
-}
-
-void break_sequence()
-{
-#ifdef TERMIOS
-    tcsendbreak (0, 0);
-#endif
-}
-
-void terminate(status)
-int status;
-{
-    static int terminating = 0;
-
-    if (terminating)
-	exit(status);
-    terminating = 1;
-    echo_stderr(-1);
-/*
- * Allow the last of the report string to be gathered before we terminate.
- */
-    if (report_gathering) {
-	int c, rep_len;
-
-	rep_len = strlen(report_buffer);
-	while (rep_len + 1 <= sizeof(report_buffer)) {
-	    alarm(1);
-	    c = get_char();
-	    alarm(0);
-	    if (c < 0 || iscntrl(c))
-		break;
-	    report_buffer[rep_len] = c;
-	    ++rep_len;
-	}
-	report_buffer[rep_len] = 0;
-	fprintf (report_fp, "chat:  %s\n", report_buffer);
-    }
-    if (report_file != (char *) 0 && report_fp != (FILE *) NULL) {
-	if (verbose)
-	    fprintf (report_fp, "Closing \"%s\".\n", report_file);
-	fclose (report_fp);
-	report_fp = (FILE *) NULL;
-    }
-
-#if defined(get_term_param)
-    if (have_tty_parameters) {
-	if (set_term_param (&saved_tty_parameters) < 0)
-	    fatal(2, "Can't restore terminal parameters: %m");
-    }
-#endif
-
-    exit(status);
-}
-
-/*
- *	'Clean up' this string.
- */
-char *clean(s, sending)
-register char *s;
-int sending;  /* set to 1 when sending (putting) this string. */
-{
-    char temp[STR_LEN], env_str[STR_LEN], cur_chr;
-    register char *s1, *phchar;
-    int add_return = sending;
-#define isoctal(chr)	(((chr) >= '0') && ((chr) <= '7'))
-#define isalnumx(chr)	((((chr) >= '0') && ((chr) <= '9')) \
-			 || (((chr) >= 'a') && ((chr) <= 'z')) \
-			 || (((chr) >= 'A') && ((chr) <= 'Z')) \
-			 || (chr) == '_')
-
-    s1 = temp;
-    while (*s) {
-	cur_chr = *s++;
-	if (cur_chr == '^') {
-	    cur_chr = *s++;
-	    if (cur_chr == '\0') {
-		*s1++ = '^';
-		break;
-	    }
-	    cur_chr &= 0x1F;
-	    if (cur_chr != 0) {
-		*s1++ = cur_chr;
-	    }
-	    continue;
-	}
-	
-	if (use_env && cur_chr == '$') {		/* ARI */
-	    phchar = env_str;
-	    while (isalnumx(*s))
-		*phchar++ = *s++;
-	    *phchar = '\0';
-	    phchar = getenv(env_str);
-	    if (phchar)
-		while (*phchar)
-		    *s1++ = *phchar++;
-	    continue;
-	}
-
-	if (cur_chr != '\\') {
-	    *s1++ = cur_chr;
-	    continue;
-	}
-
-	cur_chr = *s++;
-	if (cur_chr == '\0') {
-	    if (sending) {
-		*s1++ = '\\';
-		*s1++ = '\\';
-	    }
-	    break;
-	}
-
-	switch (cur_chr) {
-	case 'b':
-	    *s1++ = '\b';
-	    break;
-
-	case 'c':
-	    if (sending && *s == '\0')
-		add_return = 0;
-	    else
-		*s1++ = cur_chr;
-	    break;
-
-	case '\\':
-	case 'K':
-	case 'p':
-	case 'd':
-	    if (sending)
-		*s1++ = '\\';
-	    *s1++ = cur_chr;
-	    break;
-
-	case 'T':
-	    if (sending && phone_num) {
-		for (phchar = phone_num; *phchar != '\0'; phchar++) 
-		    *s1++ = *phchar;
-	    }
-	    else {
-		*s1++ = '\\';
-		*s1++ = 'T';
-	    }
-	    break;
-
-	case 'U':
-	    if (sending && phone_num2) {
-		for (phchar = phone_num2; *phchar != '\0'; phchar++) 
-		    *s1++ = *phchar;
-	    }
-	    else {
-		*s1++ = '\\';
-		*s1++ = 'U';
-	    }
-	    break;
-
-	case 'q':
-	    quiet = 1;
-	    break;
-
-	case 'r':
-	    *s1++ = '\r';
-	    break;
-
-	case 'n':
-	    *s1++ = '\n';
-	    break;
-
-	case 's':
-	    *s1++ = ' ';
-	    break;
-
-	case 't':
-	    *s1++ = '\t';
-	    break;
-
-	case 'N':
-	    if (sending) {
-		*s1++ = '\\';
-		*s1++ = '\0';
-	    }
-	    else
-		*s1++ = 'N';
-	    break;
-	    
-	case '$':			/* ARI */
-	    if (use_env) {
-		*s1++ = cur_chr;
-		break;
-	    }
-	    /* FALL THROUGH */
-
-	default:
-	    if (isoctal (cur_chr)) {
-		cur_chr &= 0x07;
-		if (isoctal (*s)) {
-		    cur_chr <<= 3;
-		    cur_chr |= *s++ - '0';
-		    if (isoctal (*s)) {
-			cur_chr <<= 3;
-			cur_chr |= *s++ - '0';
-		    }
-		}
-
-		if (cur_chr != 0 || sending) {
-		    if (sending && (cur_chr == '\\' || cur_chr == 0))
-			*s1++ = '\\';
-		    *s1++ = cur_chr;
-		}
-		break;
-	    }
-
-	    if (sending)
-		*s1++ = '\\';
-	    *s1++ = cur_chr;
-	    break;
-	}
-    }
-
-    if (add_return)
-	*s1++ = '\r';
-
-    *s1++ = '\0'; /* guarantee closure */
-    *s1++ = '\0'; /* terminate the string */
-    return dup_mem (temp, (size_t) (s1 - temp)); /* may have embedded nuls */
-}
-
-/*
- * A modified version of 'strtok'. This version skips \ sequences.
- */
-
-char *expect_strtok (s, term)
-     char *s, *term;
-{
-    static  char *str   = "";
-    int	    escape_flag = 0;
-    char   *result;
-
-/*
- * If a string was specified then do initial processing.
- */
-    if (s)
-	str = s;
-
-/*
- * If this is the escape flag then reset it and ignore the character.
- */
-    if (*str)
-	result = str;
-    else
-	result = (char *) 0;
-
-    while (*str) {
-	if (escape_flag) {
-	    escape_flag = 0;
-	    ++str;
-	    continue;
-	}
-
-	if (*str == '\\') {
-	    ++str;
-	    escape_flag = 1;
-	    continue;
-	}
-
-/*
- * If this is not in the termination string, continue.
- */
-	if (strchr (term, *str) == (char *) 0) {
-	    ++str;
-	    continue;
-	}
-
-/*
- * This is the terminator. Mark the end of the string and stop.
- */
-	*str++ = '\0';
-	break;
-    }
-    return (result);
-}
-
-/*
- * Process the expect string
- */
-
-void chat_expect (s)
-char *s;
-{
-    char *expect;
-    char *reply;
-
-    if (strcmp(s, "HANGUP") == 0) {
-	++hup_next;
-        return;
-    }
- 
-    if (strcmp(s, "ABORT") == 0) {
-	++abort_next;
-	return;
-    }
-
-    if (strcmp(s, "CLR_ABORT") == 0) {
-	++clear_abort_next;
-	return;
-    }
-
-    if (strcmp(s, "REPORT") == 0) {
-	++report_next;
-	return;
-    }
-
-    if (strcmp(s, "CLR_REPORT") == 0) {
-	++clear_report_next;
-	return;
-    }
-
-    if (strcmp(s, "TIMEOUT") == 0) {
-	++timeout_next;
-	return;
-    }
-
-    if (strcmp(s, "ECHO") == 0) {
-	++echo_next;
-	return;
-    }
-
-    if (strcmp(s, "SAY") == 0) {
-	++say_next;
-	return;
-    }
-
-/*
- * Fetch the expect and reply string.
- */
-    for (;;) {
-	expect = expect_strtok (s, "-");
-	s      = (char *) 0;
-
-	if (expect == (char *) 0)
-	    return;
-
-	reply = expect_strtok (s, "-");
-
-/*
- * Handle the expect string. If successful then exit.
- */
-	if (get_string (expect))
-	    return;
-
-/*
- * If there is a sub-reply string then send it. Otherwise any condition
- * is terminal.
- */
-	if (reply == (char *) 0 || exit_code != 3)
-	    break;
-
-	chat_send (reply);
-    }
-
-/*
- * The expectation did not occur. This is terminal.
- */
-    if (fail_reason)
-	logf("Failed (%s)", fail_reason);
-    else
-	logf("Failed");
-    terminate(exit_code);
-}
-
-/*
- * Translate the input character to the appropriate string for printing
- * the data.
- */
-
-char *character(c)
-int c;
-{
-    static char string[10];
-    char *meta;
-
-    meta = (c & 0x80) ? "M-" : "";
-    c &= 0x7F;
-
-    if (c < 32)
-	sprintf(string, "%s^%c", meta, (int)c + '@');
-    else if (c == 127)
-	sprintf(string, "%s^?", meta);
-    else
-	sprintf(string, "%s%c", meta, c);
-
-    return (string);
-}
-
-/*
- *  process the reply string
- */
-void chat_send (s)
-register char *s;
-{
-    char file_data[STR_LEN];
-
-    if (say_next) {
-	say_next = 0;
-	s = clean(s, 1);
-	write(2, s, strlen(s));
-        free(s);
-	return;
-    }
-
-    if (hup_next) {
-        hup_next = 0;
-	if (strcmp(s, "OFF") == 0)
-           signal(SIGHUP, SIG_IGN);
-        else
-           signal(SIGHUP, sighup);
-        return;
-    }
-
-    if (echo_next) {
-	echo_next = 0;
-	echo = (strcmp(s, "ON") == 0);
-	return;
-    }
-
-    if (abort_next) {
-	char *s1;
-	
-	abort_next = 0;
-	
-	if (n_aborts >= MAX_ABORTS)
-	    fatal(2, "Too many ABORT strings");
-	
-	s1 = clean(s, 0);
-	
-	if (strlen(s1) > strlen(s)
-	    || strlen(s1) + 1 > sizeof(fail_buffer))
-	    fatal(1, "Illegal or too-long ABORT string ('%v')", s);
-
-	abort_string[n_aborts++] = s1;
-
-	if (verbose)
-	    logf("abort on (%v)", s);
-	return;
-    }
-
-    if (clear_abort_next) {
-	char *s1;
-	int   i;
-        int   old_max;
-	int   pack = 0;
-	
-	clear_abort_next = 0;
-	
-	s1 = clean(s, 0);
-	
-	if (strlen(s1) > strlen(s)
-	    || strlen(s1) + 1 > sizeof(fail_buffer))
-	    fatal(1, "Illegal or too-long CLR_ABORT string ('%v')", s);
-
-        old_max = n_aborts;
-	for (i=0; i < n_aborts; i++) {
-	    if ( strcmp(s1,abort_string[i]) == 0 ) {
-		free(abort_string[i]);
-		abort_string[i] = NULL;
-		pack++;
-		n_aborts--;
-		if (verbose)
-		    logf("clear abort on (%v)", s);
-	    }
-	}
-        free(s1);
-	if (pack)
-	    pack_array(abort_string,old_max);
-	return;
-    }
-
-    if (report_next) {
-	char *s1;
-	
-	report_next = 0;
-	if (n_reports >= MAX_REPORTS)
-	    fatal(2, "Too many REPORT strings");
-	
-	s1 = clean(s, 0);
-	
-	if (strlen(s1) > strlen(s) || strlen(s1) > sizeof fail_buffer - 1)
-	    fatal(1, "Illegal or too-long REPORT string ('%v')", s);
-	
-	report_string[n_reports++] = s1;
-	
-	if (verbose)
-	    logf("report (%v)", s);
-	return;
-    }
-
-    if (clear_report_next) {
-	char *s1;
-	int   i;
-	int   old_max;
-	int   pack = 0;
-	
-	clear_report_next = 0;
-	
-	s1 = clean(s, 0);
-	
-	if (strlen(s1) > strlen(s) || strlen(s1) > sizeof fail_buffer - 1)
-	    fatal(1, "Illegal or too-long REPORT string ('%v')", s);
-
-	old_max = n_reports;
-	for (i=0; i < n_reports; i++) {
-	    if ( strcmp(s1,report_string[i]) == 0 ) {
-		free(report_string[i]);
-		report_string[i] = NULL;
-		pack++;
-		n_reports--;
-		if (verbose)
-		    logf("clear report (%v)", s);
-	    }
-	}
-        free(s1);
-        if (pack)
-	    pack_array(report_string,old_max);
-	
-	return;
-    }
-
-    if (timeout_next) {
-	timeout_next = 0;
-	timeout = atoi(s);
-	
-	if (timeout <= 0)
-	    timeout = DEFAULT_CHAT_TIMEOUT;
-
-	if (verbose)
-	    logf("timeout set to %d seconds", timeout);
-
-	return;
-    }
-
-    /*
-     * The syntax @filename means read the string to send from the
-     * file `filename'.
-     */
-    if (s[0] == '@') {
-	/* skip the @ and any following white-space */
-	char *fn = s;
-	while (*++fn == ' ' || *fn == '\t')
-	    ;
-
-	if (*fn != 0) {
-	    FILE *f;
-	    int n = 0;
-
-	    /* open the file and read until STR_LEN-1 bytes or end-of-file */
-	    f = fopen(fn, "r");
-	    if (f == NULL)
-		fatal(1, "%s -- open failed: %m", fn);
-	    while (n < STR_LEN - 1) {
-		int nr = fread(&file_data[n], 1, STR_LEN - 1 - n, f);
-		if (nr < 0)
-		    fatal(1, "%s -- read error", fn);
-		if (nr == 0)
-		    break;
-		n += nr;
-	    }
-	    fclose(f);
-
-	    /* use the string we got as the string to send,
-	       but trim off the final newline if any. */
-	    if (n > 0 && file_data[n-1] == '\n')
-		--n;
-	    file_data[n] = 0;
-	    s = file_data;
-	}
-    }
-
-    if (strcmp(s, "EOT") == 0)
-	s = "^D\\c";
-    else if (strcmp(s, "BREAK") == 0)
-	s = "\\K\\c";
-
-    if (!put_string(s))
-	fatal(1, "Failed");
-}
-
-int get_char()
-{
-    int status;
-    char c;
-
-    status = read(0, &c, 1);
-
-    switch (status) {
-    case 1:
-	return ((int)c & 0x7F);
-
-    default:
-	logf("warning: read() on stdin returned %d", status);
-
-    case -1:
-	if ((status = fcntl(0, F_GETFL, 0)) == -1)
-	    fatal(2, "Can't get file mode flags on stdin: %m");
-
-	if (fcntl(0, F_SETFL, status & ~O_NONBLOCK) == -1)
-	    fatal(2, "Can't set file mode flags on stdin: %m");
-	
-	return (-1);
-    }
-}
-
-int put_char(c)
-int c;
-{
-    int status;
-    char ch = c;
-
-    usleep(10000);		/* inter-character typing delay (?) */
-
-    status = write(1, &ch, 1);
-
-    switch (status) {
-    case 1:
-	return (0);
-	
-    default:
-	logf("warning: write() on stdout returned %d", status);
-	
-    case -1:
-	if ((status = fcntl(0, F_GETFL, 0)) == -1)
-	    fatal(2, "Can't get file mode flags on stdin, %m");
-
-	if (fcntl(0, F_SETFL, status & ~O_NONBLOCK) == -1)
-	    fatal(2, "Can't set file mode flags on stdin: %m");
-	
-	return (-1);
-    }
-}
-
-int write_char (c)
-int c;
-{
-    if (alarmed || put_char(c) < 0) {
-	alarm(0);
-	alarmed = 0;
-
-	if (verbose) {
-	    if (errno == EINTR || errno == EWOULDBLOCK)
-		logf(" -- write timed out");
-	    else
-		logf(" -- write failed: %m");
-	}
-	return (0);
-    }
-    return (1);
-}
-
-int put_string (s)
-register char *s;
-{
-    quiet = 0;
-    s = clean(s, 1);
-
-    if (verbose) {
-	if (quiet)
-	    logf("send (??????)");
-	else
-	    logf("send (%v)", s);
-    }
-
-    alarm(timeout); alarmed = 0;
-
-    while (*s) {
-	register char c = *s++;
-
-	if (c != '\\') {
-	    if (!write_char (c))
-		return 0;
-	    continue;
-	}
-
-	c = *s++;
-	switch (c) {
-	case 'd':
-	    sleep(1);
-	    break;
-
-	case 'K':
-	    break_sequence();
-	    break;
-
-	case 'p':
-	    usleep(10000); 	/* 1/100th of a second (arg is microseconds) */
-	    break;
-
-	default:
-	    if (!write_char (c))
-		return 0;
-	    break;
-	}
-    }
-
-    alarm(0);
-    alarmed = 0;
-    return (1);
-}
-
-/*
- *	Echo a character to stderr.
- *	When called with -1, a '\n' character is generated when
- *	the cursor is not at the beginning of a line.
- */
-void echo_stderr(n)
-int n;
-{
-    static int need_lf;
-    char *s;
-
-    switch (n) {
-    case '\r':		/* ignore '\r' */
-	break;
-    case -1:
-	if (need_lf == 0)
-	    break;
-	/* fall through */
-    case '\n':
-	write(2, "\n", 1);
-	need_lf = 0;
-	break;
-    default:
-	s = character(n);
-	write(2, s, strlen(s));
-	need_lf = 1;
-	break;
-    }
-}
-
-/*
- *	'Wait for' this string to appear on this file descriptor.
- */
-int get_string(string)
-register char *string;
-{
-    char temp[STR_LEN];
-    int c, printed = 0, len, minlen;
-    register char *s = temp, *end = s + STR_LEN;
-    char *logged = temp;
-
-    fail_reason = (char *)0;
-    string = clean(string, 0);
-    len = strlen(string);
-    minlen = (len > sizeof(fail_buffer)? len: sizeof(fail_buffer)) - 1;
-
-    if (verbose)
-	logf("expect (%v)", string);
-
-    if (len > STR_LEN) {
-	logf("expect string is too long");
-	exit_code = 1;
-	return 0;
-    }
-
-    if (len == 0) {
-	if (verbose)
-	    logf("got it");
-	return (1);
-    }
-
-    alarm(timeout);
-    alarmed = 0;
-
-    while ( ! alarmed && (c = get_char()) >= 0) {
-	int n, abort_len, report_len;
-
-	if (echo)
-	    echo_stderr(c);
-	if (verbose && c == '\n') {
-	    if (s == logged)
-		logf("");	/* blank line */
-	    else
-		logf("%0.*v", s - logged, logged);
-	    logged = s + 1;
-	}
-
-	*s++ = c;
-
-	if (verbose && s >= logged + 80) {
-	    logf("%0.*v", s - logged, logged);
-	    logged = s;
-	}
-
-	if (Verbose) {
-	   if (c == '\n')
-	       fputc( '\n', stderr );
-	   else if (c != '\r')
-	       fprintf( stderr, "%s", character(c) );
-	}
-
-	if (!report_gathering) {
-	    for (n = 0; n < n_reports; ++n) {
-		if ((report_string[n] != (char*) NULL) &&
-		    s - temp >= (report_len = strlen(report_string[n])) &&
-		    strncmp(s - report_len, report_string[n], report_len) == 0) {
-		    time_t time_now   = time ((time_t*) NULL);
-		    struct tm* tm_now = localtime (&time_now);
-
-		    strftime (report_buffer, 20, "%b %d %H:%M:%S ", tm_now);
-		    strcat (report_buffer, report_string[n]);
-
-		    report_string[n] = (char *) NULL;
-		    report_gathering = 1;
-		    break;
-		}
-	    }
-	}
-	else {
-	    if (!iscntrl (c)) {
-		int rep_len = strlen (report_buffer);
-		report_buffer[rep_len]     = c;
-		report_buffer[rep_len + 1] = '\0';
-	    }
-	    else {
-		report_gathering = 0;
-		fprintf (report_fp, "chat:  %s\n", report_buffer);
-	    }
-	}
-
-	if (s - temp >= len &&
-	    c == string[len - 1] &&
-	    strncmp(s - len, string, len) == 0) {
-	    if (verbose) {
-		if (s > logged)
-		    logf("%0.*v", s - logged, logged);
-		logf(" -- got it\n");
-	    }
-
-	    alarm(0);
-	    alarmed = 0;
-	    return (1);
-	}
-
-	for (n = 0; n < n_aborts; ++n) {
-	    if (s - temp >= (abort_len = strlen(abort_string[n])) &&
-		strncmp(s - abort_len, abort_string[n], abort_len) == 0) {
-		if (verbose) {
-		    if (s > logged)
-			logf("%0.*v", s - logged, logged);
-		    logf(" -- failed");
-		}
-
-		alarm(0);
-		alarmed = 0;
-		exit_code = n + 4;
-		strcpy(fail_reason = fail_buffer, abort_string[n]);
-		return (0);
-	    }
-	}
-
-	if (s >= end) {
-	    if (logged < s - minlen) {
-		if (verbose)
-		    logf("%0.*v", s - logged, logged);
-		logged = s;
-	    }
-	    s -= minlen;
-	    memmove(temp, s, minlen);
-	    logged = temp + (logged - s);
-	    s = temp + minlen;
-	}
-
-	if (alarmed && verbose)
-	    logf("warning: alarm synchronization problem");
-    }
-
-    alarm(0);
-    
-    if (verbose && printed) {
-	if (alarmed)
-	    logf(" -- read timed out");
-	else
-	    logf(" -- read failed: %m");
-    }
-
-    exit_code = 3;
-    alarmed   = 0;
-    return (0);
-}
-
-/*
- * Gross kludge to handle Solaris versions >= 2.6 having usleep.
- */
-#ifdef SOL2
-#include <sys/param.h>
-#if MAXUID > 65536		/* then this is Solaris 2.6 or later */
-#undef NO_USLEEP
-#endif
-#endif /* SOL2 */
-
-#ifdef NO_USLEEP
-#include <sys/types.h>
-#include <sys/time.h>
-
-/*
-  usleep -- support routine for 4.2BSD system call emulations
-  last edit:  29-Oct-1984     D A Gwyn
-  */
-
-extern int	  select();
-
-int
-usleep( usec )				  /* returns 0 if ok, else -1 */
-    long		usec;		/* delay in microseconds */
-{
-    static struct {		/* `timeval' */
-	long	tv_sec;		/* seconds */
-	long	tv_usec;	/* microsecs */
-    } delay;	    		/* _select() timeout */
-
-    delay.tv_sec  = usec / 1000000L;
-    delay.tv_usec = usec % 1000000L;
-
-    return select(0, (long *)0, (long *)0, (long *)0, &delay);
-}
-#endif
-
-void
-pack_array (array, end)
-    char **array; /* The address of the array of string pointers */
-    int    end;   /* The index of the next free entry before CLR_ */
-{
-    int i, j;
-
-    for (i = 0; i < end; i++) {
-	if (array[i] == NULL) {
-	    for (j = i+1; j < end; ++j)
-		if (array[j] != NULL)
-		    array[i++] = array[j];
-	    for (; i < end; ++i)
-		array[i] = NULL;
-	    break;
-	}
-    }
-}
-
-/*
- * vfmtmsg - format a message into a buffer.  Like vsprintf except we
- * also specify the length of the output buffer, and we handle the
- * %m (error message) format.
- * Doesn't do floating-point formats.
- * Returns the number of chars put into buf.
- */
-#define OUTCHAR(c)	(buflen > 0? (--buflen, *buf++ = (c)): 0)
-
-int
-vfmtmsg(buf, buflen, fmt, args)
-    char *buf;
-    int buflen;
-    const char *fmt;
-    va_list args;
-{
-    int c, i, n;
-    int width, prec, fillch;
-    int base, len, neg, quoted;
-    unsigned long val = 0;
-    char *str, *buf0;
-    const char *f;
-    unsigned char *p;
-    char num[32];
-    static char hexchars[] = "0123456789abcdef";
-
-    buf0 = buf;
-    --buflen;
-    while (buflen > 0) {
-	for (f = fmt; *f != '%' && *f != 0; ++f)
-	    ;
-	if (f > fmt) {
-	    len = f - fmt;
-	    if (len > buflen)
-		len = buflen;
-	    memcpy(buf, fmt, len);
-	    buf += len;
-	    buflen -= len;
-	    fmt = f;
-	}
-	if (*fmt == 0)
-	    break;
-	c = *++fmt;
-	width = prec = 0;
-	fillch = ' ';
-	if (c == '0') {
-	    fillch = '0';
-	    c = *++fmt;
-	}
-	if (c == '*') {
-	    width = va_arg(args, int);
-	    c = *++fmt;
-	} else {
-	    while (isdigit(c)) {
-		width = width * 10 + c - '0';
-		c = *++fmt;
-	    }
-	}
-	if (c == '.') {
-	    c = *++fmt;
-	    if (c == '*') {
-		prec = va_arg(args, int);
-		c = *++fmt;
-	    } else {
-		while (isdigit(c)) {
-		    prec = prec * 10 + c - '0';
-		    c = *++fmt;
-		}
-	    }
-	}
-	str = 0;
-	base = 0;
-	neg = 0;
-	++fmt;
-	switch (c) {
-	case 'd':
-	    i = va_arg(args, int);
-	    if (i < 0) {
-		neg = 1;
-		val = -i;
-	    } else
-		val = i;
-	    base = 10;
-	    break;
-	case 'o':
-	    val = va_arg(args, unsigned int);
-	    base = 8;
-	    break;
-	case 'x':
-	    val = va_arg(args, unsigned int);
-	    base = 16;
-	    break;
-	case 'p':
-	    val = (unsigned long) va_arg(args, void *);
-	    base = 16;
-	    neg = 2;
-	    break;
-	case 's':
-	    str = va_arg(args, char *);
-	    break;
-	case 'c':
-	    num[0] = va_arg(args, int);
-	    num[1] = 0;
-	    str = num;
-	    break;
-	case 'm':
-	    str = strerror(errno);
-	    break;
-	case 'v':		/* "visible" string */
-	case 'q':		/* quoted string */
-	    quoted = c == 'q';
-	    p = va_arg(args, unsigned char *);
-	    if (fillch == '0' && prec > 0) {
-		n = prec;
-	    } else {
-		n = strlen((char *)p);
-		if (prec > 0 && prec < n)
-		    n = prec;
-	    }
-	    while (n > 0 && buflen > 0) {
-		c = *p++;
-		--n;
-		if (!quoted && c >= 0x80) {
-		    OUTCHAR('M');
-		    OUTCHAR('-');
-		    c -= 0x80;
-		}
-		if (quoted && (c == '"' || c == '\\'))
-		    OUTCHAR('\\');
-		if (c < 0x20 || (0x7f <= c && c < 0xa0)) {
-		    if (quoted) {
-			OUTCHAR('\\');
-			switch (c) {
-			case '\t':	OUTCHAR('t');	break;
-			case '\n':	OUTCHAR('n');	break;
-			case '\b':	OUTCHAR('b');	break;
-			case '\f':	OUTCHAR('f');	break;
-			default:
-			    OUTCHAR('x');
-			    OUTCHAR(hexchars[c >> 4]);
-			    OUTCHAR(hexchars[c & 0xf]);
-			}
-		    } else {
-			if (c == '\t')
-			    OUTCHAR(c);
-			else {
-			    OUTCHAR('^');
-			    OUTCHAR(c ^ 0x40);
-			}
-		    }
-		} else
-		    OUTCHAR(c);
-	    }
-	    continue;
-	default:
-	    *buf++ = '%';
-	    if (c != '%')
-		--fmt;		/* so %z outputs %z etc. */
-	    --buflen;
-	    continue;
-	}
-	if (base != 0) {
-	    str = num + sizeof(num);
-	    *--str = 0;
-	    while (str > num + neg) {
-		*--str = hexchars[val % base];
-		val = val / base;
-		if (--prec <= 0 && val == 0)
-		    break;
-	    }
-	    switch (neg) {
-	    case 1:
-		*--str = '-';
-		break;
-	    case 2:
-		*--str = 'x';
-		*--str = '0';
-		break;
-	    }
-	    len = num + sizeof(num) - 1 - str;
-	} else {
-	    len = strlen(str);
-	    if (prec > 0 && len > prec)
-		len = prec;
-	}
-	if (width > 0) {
-	    if (width > buflen)
-		width = buflen;
-	    if ((n = width - len) > 0) {
-		buflen -= n;
-		for (; n > 0; --n)
-		    *buf++ = fillch;
-	    }
-	}
-	if (len > buflen)
-	    len = buflen;
-	memcpy(buf, str, len);
-	buf += len;
-	buflen -= len;
-    }
-    *buf = 0;
-    return buf - buf0;
-}
diff --git a/mdk-stage1/ppp/common/zlib.c b/mdk-stage1/ppp/common/zlib.c
deleted file mode 100644
index 503076886..000000000
--- a/mdk-stage1/ppp/common/zlib.c
+++ /dev/null
@@ -1,5376 +0,0 @@
-/*
- * This file is derived from various .h and .c files from the zlib-1.0.4
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.  See zlib.h for conditions of
- * distribution and use.
- *
- * Changes that have been made include:
- * - added Z_PACKET_FLUSH (see zlib.h for details)
- * - added inflateIncomp and deflateOutputPending
- * - allow strm->next_out to be NULL, meaning discard the output
- *
- * $Id$
- */
-
-/* 
- *  ==FILEVERSION 971210==
- *
- * This marker is used by the Linux installation script to determine
- * whether an up-to-date version of this file is already installed.
- */
-
-#define NO_DUMMY_DECL
-#define NO_ZCFUNCS
-#define MY_ZCALLOC
-
-#if defined(__FreeBSD__) && (defined(KERNEL) || defined(_KERNEL))
-#define inflate	inflate_ppp	/* FreeBSD already has an inflate :-( */
-#endif
-
-
-/* +++ zutil.h */
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* From: zutil.h,v 1.16 1996/07/24 13:41:13 me Exp $ */
-
-#ifndef _Z_UTIL_H
-#define _Z_UTIL_H
-
-#include "zlib.h"
-
-#if defined(KERNEL) || defined(_KERNEL)
-/* Assume this is a *BSD or SVR4 kernel */
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/systm.h>
-#undef u
-#  define HAVE_MEMCPY
-#  define memcpy(d, s, n)	bcopy((s), (d), (n))
-#  define memset(d, v, n)	bzero((d), (n))
-#  define memcmp		bcmp
-
-#else
-#if defined(__KERNEL__)
-/* Assume this is a Linux kernel */
-#include <linux/string.h>
-#define HAVE_MEMCPY
-
-#else /* not kernel */
-
-#if defined(MSDOS)||defined(VMS)||defined(CRAY)||defined(WIN32)||defined(RISCOS)
-#   include <stddef.h>
-#   include <errno.h>
-#else
-    extern int errno;
-#endif
-#ifdef STDC
-#  include <string.h>
-#  include <stdlib.h>
-#endif
-#endif /* __KERNEL__ */
-#endif /* _KERNEL || KERNEL */
-
-#ifndef local
-#  define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-typedef unsigned char  uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long  ulg;
-
-extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
-/* (size given to avoid silly warnings with Visual C++) */
-
-#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
-
-#define ERR_RETURN(strm,err) \
-  return (strm->msg = (char*)ERR_MSG(err), (err))
-/* To be used only when the state is known to be valid */
-
-        /* common constants */
-
-#ifndef DEF_WBITS
-#  define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-#  define DEF_MEM_LEVEL 8
-#else
-#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES    2
-/* The three kinds of block type */
-
-#define MIN_MATCH  3
-#define MAX_MATCH  258
-/* The minimum and maximum match lengths */
-
-#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
-
-        /* target dependencies */
-
-#ifdef MSDOS
-#  define OS_CODE  0x00
-#  ifdef __TURBOC__
-#    include <alloc.h>
-#  else /* MSC or DJGPP */
-#    include <malloc.h>
-#  endif
-#endif
-
-#ifdef OS2
-#  define OS_CODE  0x06
-#endif
-
-#ifdef WIN32 /* Window 95 & Windows NT */
-#  define OS_CODE  0x0b
-#endif
-
-#if defined(VAXC) || defined(VMS)
-#  define OS_CODE  0x02
-#  define FOPEN(name, mode) \
-     fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
-#endif
-
-#ifdef AMIGA
-#  define OS_CODE  0x01
-#endif
-
-#if defined(ATARI) || defined(atarist)
-#  define OS_CODE  0x05
-#endif
-
-#ifdef MACOS
-#  define OS_CODE  0x07
-#endif
-
-#ifdef __50SERIES /* Prime/PRIMOS */
-#  define OS_CODE  0x0F
-#endif
-
-#ifdef TOPS20
-#  define OS_CODE  0x0a
-#endif
-
-#if defined(_BEOS_) || defined(RISCOS)
-#  define fdopen(fd,mode) NULL /* No fdopen() */
-#endif
-
-        /* Common defaults */
-
-#ifndef OS_CODE
-#  define OS_CODE  0x03  /* assume Unix */
-#endif
-
-#ifndef FOPEN
-#  define FOPEN(name, mode) fopen((name), (mode))
-#endif
-
-         /* functions */
-
-#ifdef HAVE_STRERROR
-   extern char *strerror OF((int));
-#  define zstrerror(errnum) strerror(errnum)
-#else
-#  define zstrerror(errnum) ""
-#endif
-
-#if defined(pyr)
-#  define NO_MEMCPY
-#endif
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(_MSC_VER)
- /* Use our own functions for small and medium model with MSC <= 5.0.
-  * You may have to use the same strategy for Borland C (untested).
-  */
-#  define NO_MEMCPY
-#endif
-#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
-#  define HAVE_MEMCPY
-#endif
-#ifdef HAVE_MEMCPY
-#  ifdef SMALL_MEDIUM /* MSDOS small or medium model */
-#    define zmemcpy _fmemcpy
-#    define zmemcmp _fmemcmp
-#    define zmemzero(dest, len) _fmemset(dest, 0, len)
-#  else
-#    define zmemcpy memcpy
-#    define zmemcmp memcmp
-#    define zmemzero(dest, len) memset(dest, 0, len)
-#  endif
-#else
-   extern void zmemcpy  OF((Bytef* dest, Bytef* source, uInt len));
-   extern int  zmemcmp  OF((Bytef* s1,   Bytef* s2, uInt len));
-   extern void zmemzero OF((Bytef* dest, uInt len));
-#endif
-
-/* Diagnostic functions */
-#ifdef DEBUG_ZLIB
-#  include <stdio.h>
-#  ifndef verbose
-#    define verbose 0
-#  endif
-   extern void z_error    OF((char *m));
-#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-
-typedef uLong (*check_func) OF((uLong check, const Bytef *buf, uInt len));
-
-voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
-void   zcfree  OF((voidpf opaque, voidpf ptr));
-
-#define ZALLOC(strm, items, size) \
-           (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
-#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
-
-#endif /* _Z_UTIL_H */
-/* --- zutil.h */
-
-/* +++ deflate.h */
-/* deflate.h -- internal compression state
- * Copyright (C) 1995-1996 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* From: deflate.h,v 1.10 1996/07/02 12:41:00 me Exp $ */
-
-#ifndef _DEFLATE_H
-#define _DEFLATE_H
-
-/* #include "zutil.h" */
-
-/* ===========================================================================
- * Internal compression state.
- */
-
-#define LENGTH_CODES 29
-/* number of length codes, not counting the special END_BLOCK code */
-
-#define LITERALS  256
-/* number of literal bytes 0..255 */
-
-#define L_CODES (LITERALS+1+LENGTH_CODES)
-/* number of Literal or Length codes, including the END_BLOCK code */
-
-#define D_CODES   30
-/* number of distance codes */
-
-#define BL_CODES  19
-/* number of codes used to transfer the bit lengths */
-
-#define HEAP_SIZE (2*L_CODES+1)
-/* maximum heap size */
-
-#define MAX_BITS 15
-/* All codes must not exceed MAX_BITS bits */
-
-#define INIT_STATE    42
-#define BUSY_STATE   113
-#define FINISH_STATE 666
-/* Stream status */
-
-
-/* Data structure describing a single value and its code string. */
-typedef struct ct_data_s {
-    union {
-        ush  freq;       /* frequency count */
-        ush  code;       /* bit string */
-    } fc;
-    union {
-        ush  dad;        /* father node in Huffman tree */
-        ush  len;        /* length of bit string */
-    } dl;
-} FAR ct_data;
-
-#define Freq fc.freq
-#define Code fc.code
-#define Dad  dl.dad
-#define Len  dl.len
-
-typedef struct static_tree_desc_s  static_tree_desc;
-
-typedef struct tree_desc_s {
-    ct_data *dyn_tree;           /* the dynamic tree */
-    int     max_code;            /* largest code with non zero frequency */
-    static_tree_desc *stat_desc; /* the corresponding static tree */
-} FAR tree_desc;
-
-typedef ush Pos;
-typedef Pos FAR Posf;
-typedef unsigned IPos;
-
-/* A Pos is an index in the character window. We use short instead of int to
- * save space in the various tables. IPos is used only for parameter passing.
- */
-
-typedef struct deflate_state {
-    z_streamp strm;      /* pointer back to this zlib stream */
-    int   status;        /* as the name implies */
-    Bytef *pending_buf;  /* output still pending */
-    ulg   pending_buf_size; /* size of pending_buf */
-    Bytef *pending_out;  /* next pending byte to output to the stream */
-    int   pending;       /* nb of bytes in the pending buffer */
-    int   noheader;      /* suppress zlib header and adler32 */
-    Byte  data_type;     /* UNKNOWN, BINARY or ASCII */
-    Byte  method;        /* STORED (for zip only) or DEFLATED */
-    int   last_flush;    /* value of flush param for previous deflate call */
-
-                /* used by deflate.c: */
-
-    uInt  w_size;        /* LZ77 window size (32K by default) */
-    uInt  w_bits;        /* log2(w_size)  (8..16) */
-    uInt  w_mask;        /* w_size - 1 */
-
-    Bytef *window;
-    /* Sliding window. Input bytes are read into the second half of the window,
-     * and move to the first half later to keep a dictionary of at least wSize
-     * bytes. With this organization, matches are limited to a distance of
-     * wSize-MAX_MATCH bytes, but this ensures that IO is always
-     * performed with a length multiple of the block size. Also, it limits
-     * the window size to 64K, which is quite useful on MSDOS.
-     * To do: use the user input buffer as sliding window.
-     */
-
-    ulg window_size;
-    /* Actual size of window: 2*wSize, except when the user input buffer
-     * is directly used as sliding window.
-     */
-
-    Posf *prev;
-    /* Link to older string with same hash index. To limit the size of this
-     * array to 64K, this link is maintained only for the last 32K strings.
-     * An index in this array is thus a window index modulo 32K.
-     */
-
-    Posf *head; /* Heads of the hash chains or NIL. */
-
-    uInt  ins_h;          /* hash index of string to be inserted */
-    uInt  hash_size;      /* number of elements in hash table */
-    uInt  hash_bits;      /* log2(hash_size) */
-    uInt  hash_mask;      /* hash_size-1 */
-
-    uInt  hash_shift;
-    /* Number of bits by which ins_h must be shifted at each input
-     * step. It must be such that after MIN_MATCH steps, the oldest
-     * byte no longer takes part in the hash key, that is:
-     *   hash_shift * MIN_MATCH >= hash_bits
-     */
-
-    long block_start;
-    /* Window position at the beginning of the current output block. Gets
-     * negative when the window is moved backwards.
-     */
-
-    uInt match_length;           /* length of best match */
-    IPos prev_match;             /* previous match */
-    int match_available;         /* set if previous match exists */
-    uInt strstart;               /* start of string to insert */
-    uInt match_start;            /* start of matching string */
-    uInt lookahead;              /* number of valid bytes ahead in window */
-
-    uInt prev_length;
-    /* Length of the best match at previous step. Matches not greater than this
-     * are discarded. This is used in the lazy match evaluation.
-     */
-
-    uInt max_chain_length;
-    /* To speed up deflation, hash chains are never searched beyond this
-     * length.  A higher limit improves compression ratio but degrades the
-     * speed.
-     */
-
-    uInt max_lazy_match;
-    /* Attempt to find a better match only when the current match is strictly
-     * smaller than this value. This mechanism is used only for compression
-     * levels >= 4.
-     */
-#   define max_insert_length  max_lazy_match
-    /* Insert new strings in the hash table only if the match length is not
-     * greater than this length. This saves time but degrades compression.
-     * max_insert_length is used only for compression levels <= 3.
-     */
-
-    int level;    /* compression level (1..9) */
-    int strategy; /* favor or force Huffman coding*/
-
-    uInt good_match;
-    /* Use a faster search when the previous match is longer than this */
-
-    int nice_match; /* Stop searching when current match exceeds this */
-
-                /* used by trees.c: */
-    /* Didn't use ct_data typedef below to supress compiler warning */
-    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
-    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
-    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
-
-    struct tree_desc_s l_desc;               /* desc. for literal tree */
-    struct tree_desc_s d_desc;               /* desc. for distance tree */
-    struct tree_desc_s bl_desc;              /* desc. for bit length tree */
-
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
-    int heap_len;               /* number of elements in the heap */
-    int heap_max;               /* element of largest frequency */
-    /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
-     * The same heap array is used to build all trees.
-     */
-
-    uch depth[2*L_CODES+1];
-    /* Depth of each subtree used as tie breaker for trees of equal frequency
-     */
-
-    uchf *l_buf;          /* buffer for literals or lengths */
-
-    uInt  lit_bufsize;
-    /* Size of match buffer for literals/lengths.  There are 4 reasons for
-     * limiting lit_bufsize to 64K:
-     *   - frequencies can be kept in 16 bit counters
-     *   - if compression is not successful for the first block, all input
-     *     data is still in the window so we can still emit a stored block even
-     *     when input comes from standard input.  (This can also be done for
-     *     all blocks if lit_bufsize is not greater than 32K.)
-     *   - if compression is not successful for a file smaller than 64K, we can
-     *     even emit a stored file instead of a stored block (saving 5 bytes).
-     *     This is applicable only for zip (not gzip or zlib).
-     *   - creating new Huffman trees less frequently may not provide fast
-     *     adaptation to changes in the input data statistics. (Take for
-     *     example a binary file with poorly compressible code followed by
-     *     a highly compressible string table.) Smaller buffer sizes give
-     *     fast adaptation but have of course the overhead of transmitting
-     *     trees more frequently.
-     *   - I can't count above 4
-     */
-
-    uInt last_lit;      /* running index in l_buf */
-
-    ushf *d_buf;
-    /* Buffer for distances. To simplify the code, d_buf and l_buf have
-     * the same number of elements. To use different lengths, an extra flag
-     * array would be necessary.
-     */
-
-    ulg opt_len;        /* bit length of current block with optimal trees */
-    ulg static_len;     /* bit length of current block with static trees */
-    ulg compressed_len; /* total bit length of compressed file */
-    uInt matches;       /* number of string matches in current block */
-    int last_eob_len;   /* bit length of EOB code for last block */
-
-#ifdef DEBUG_ZLIB
-    ulg bits_sent;      /* bit length of the compressed data */
-#endif
-
-    ush bi_buf;
-    /* Output buffer. bits are inserted starting at the bottom (least
-     * significant bits).
-     */
-    int bi_valid;
-    /* Number of valid bits in bi_buf.  All bits above the last valid bit
-     * are always zero.
-     */
-
-} FAR deflate_state;
-
-/* Output a byte on the stream.
- * IN assertion: there is enough room in pending_buf.
- */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
-
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
-        /* in trees.c */
-void _tr_init         OF((deflate_state *s));
-int  _tr_tally        OF((deflate_state *s, unsigned dist, unsigned lc));
-ulg  _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
-			  int eof));
-void _tr_align        OF((deflate_state *s));
-void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
-                          int eof));
-void _tr_stored_type_only OF((deflate_state *));
-
-#endif
-/* --- deflate.h */
-
-/* +++ deflate.c */
-/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process depends on being able to identify portions
- *      of the input text which are identical to earlier input (within a
- *      sliding window trailing behind the input currently being processed).
- *
- *      The most straightforward technique turns out to be the fastest for
- *      most input files: try all possible matches and select the longest.
- *      The key feature of this algorithm is that insertions into the string
- *      dictionary are very simple and thus fast, and deletions are avoided
- *      completely. Insertions are performed at each input character, whereas
- *      string matches are performed only when the previous match ends. So it
- *      is preferable to spend more time in matches to allow very fast string
- *      insertions and avoid deletions. The matching algorithm for small
- *      strings is inspired from that of Rabin & Karp. A brute force approach
- *      is used to find longer strings when a small match has been found.
- *      A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
- *      (by Leonid Broukhis).
- *         A previous version of this file used a more sophisticated algorithm
- *      (by Fiala and Greene) which is guaranteed to run in linear amortized
- *      time, but has a larger average cost, uses more memory and is patented.
- *      However the F&G algorithm may be faster for some highly redundant
- *      files if the parameter max_chain_length (described below) is too large.
- *
- *  ACKNOWLEDGEMENTS
- *
- *      The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
- *      I found it in 'freeze' written by Leonid Broukhis.
- *      Thanks to many people for bug reports and testing.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
- *      Available in ftp://ds.internic.net/rfc/rfc1951.txt
- *
- *      A description of the Rabin and Karp algorithm is given in the book
- *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
- *
- *      Fiala,E.R., and Greene,D.H.
- *         Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
- *
- */
-
-/* From: deflate.c,v 1.15 1996/07/24 13:40:58 me Exp $ */
-
-/* #include "deflate.h" */
-
-char deflate_copyright[] = " deflate 1.0.4 Copyright 1995-1996 Jean-loup Gailly ";
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-
-/* ===========================================================================
- *  Function prototypes.
- */
-typedef enum {
-    need_more,      /* block not completed, need more input or more output */
-    block_done,     /* block flush performed */
-    finish_started, /* finish started, need only more output at next deflate */
-    finish_done     /* finish done, accept no more input or output */
-} block_state;
-
-typedef block_state (*compress_func) OF((deflate_state *s, int flush));
-/* Compression function. Returns the block state after the call. */
-
-local void fill_window    OF((deflate_state *s));
-local block_state deflate_stored OF((deflate_state *s, int flush));
-local block_state deflate_fast   OF((deflate_state *s, int flush));
-local block_state deflate_slow   OF((deflate_state *s, int flush));
-local void lm_init        OF((deflate_state *s));
-local void putShortMSB    OF((deflate_state *s, uInt b));
-local void flush_pending  OF((z_streamp strm));
-local int read_buf        OF((z_streamp strm, charf *buf, unsigned size));
-#ifdef ASMV
-      void match_init OF((void)); /* asm code initialization */
-      uInt longest_match  OF((deflate_state *s, IPos cur_match));
-#else
-local uInt longest_match  OF((deflate_state *s, IPos cur_match));
-#endif
-
-#ifdef DEBUG_ZLIB
-local  void check_match OF((deflate_state *s, IPos start, IPos match,
-                            int length));
-#endif
-
-/* ===========================================================================
- * Local data
- */
-
-#define NIL 0
-/* Tail of hash chains */
-
-#ifndef TOO_FAR
-#  define TOO_FAR 4096
-#endif
-/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-/* Values for max_lazy_match, good_match and max_chain_length, depending on
- * the desired pack level (0..9). The values given below have been tuned to
- * exclude worst case performance for pathological files. Better values may be
- * found for specific files.
- */
-typedef struct config_s {
-   ush good_length; /* reduce lazy search above this match length */
-   ush max_lazy;    /* do not perform lazy search above this match length */
-   ush nice_length; /* quit search above this match length */
-   ush max_chain;
-   compress_func func;
-} config;
-
-local config configuration_table[10] = {
-/*      good lazy nice chain */
-/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
-/* 1 */ {4,    4,  8,    4, deflate_fast}, /* maximum speed, no lazy matches */
-/* 2 */ {4,    5, 16,    8, deflate_fast},
-/* 3 */ {4,    6, 32,   32, deflate_fast},
-
-/* 4 */ {4,    4, 16,   16, deflate_slow},  /* lazy matches */
-/* 5 */ {8,   16, 32,   32, deflate_slow},
-/* 6 */ {8,   16, 128, 128, deflate_slow},
-/* 7 */ {8,   32, 128, 256, deflate_slow},
-/* 8 */ {32, 128, 258, 1024, deflate_slow},
-/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* maximum compression */
-
-/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
- * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
- * meaning.
- */
-
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-#ifndef NO_DUMMY_DECL
-struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
-#endif
-
-/* ===========================================================================
- * Update a hash value with the given input byte
- * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
- *    input characters, so that a running hash key can be computed from the
- *    previous key instead of complete recalculation each time.
- */
-#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
-
-
-/* ===========================================================================
- * Insert string str in the dictionary and set match_head to the previous head
- * of the hash chain (the most recent string with same hash key). Return
- * the previous length of the hash chain.
- * IN  assertion: all calls to to INSERT_STRING are made with consecutive
- *    input characters and the first MIN_MATCH bytes of str are valid
- *    (except for the last MIN_MATCH-1 bytes of the input file).
- */
-#define INSERT_STRING(s, str, match_head) \
-   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
-    s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
-    s->head[s->ins_h] = (Pos)(str))
-
-/* ===========================================================================
- * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
- * prev[] will be initialized on the fly.
- */
-#define CLEAR_HASH(s) \
-    s->head[s->hash_size-1] = NIL; \
-    zmemzero((charf *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
-
-/* ========================================================================= */
-int deflateInit_(strm, level, version, stream_size)
-    z_streamp strm;
-    int level;
-    const char *version;
-    int stream_size;
-{
-    return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
-			 Z_DEFAULT_STRATEGY, version, stream_size);
-    /* To do: ignore strm->next_in if we use it as window */
-}
-
-/* ========================================================================= */
-int deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
-		  version, stream_size)
-    z_streamp strm;
-    int  level;
-    int  method;
-    int  windowBits;
-    int  memLevel;
-    int  strategy;
-    const char *version;
-    int stream_size;
-{
-    deflate_state *s;
-    int noheader = 0;
-    static char* my_version = ZLIB_VERSION;
-
-    ushf *overlay;
-    /* We overlay pending_buf and d_buf+l_buf. This works since the average
-     * output size for (length,distance) codes is <= 24 bits.
-     */
-
-    if (version == Z_NULL || version[0] != my_version[0] ||
-        stream_size != sizeof(z_stream)) {
-	return Z_VERSION_ERROR;
-    }
-    if (strm == Z_NULL) return Z_STREAM_ERROR;
-
-    strm->msg = Z_NULL;
-#ifndef NO_ZCFUNCS
-    if (strm->zalloc == Z_NULL) {
-	strm->zalloc = zcalloc;
-	strm->opaque = (voidpf)0;
-    }
-    if (strm->zfree == Z_NULL) strm->zfree = zcfree;
-#endif
-
-    if (level == Z_DEFAULT_COMPRESSION) level = 6;
-
-    if (windowBits < 0) { /* undocumented feature: suppress zlib header */
-        noheader = 1;
-        windowBits = -windowBits;
-    }
-    if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
-        windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
-	strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
-        return Z_STREAM_ERROR;
-    }
-    s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
-    if (s == Z_NULL) return Z_MEM_ERROR;
-    strm->state = (struct internal_state FAR *)s;
-    s->strm = strm;
-
-    s->noheader = noheader;
-    s->w_bits = windowBits;
-    s->w_size = 1 << s->w_bits;
-    s->w_mask = s->w_size - 1;
-
-    s->hash_bits = memLevel + 7;
-    s->hash_size = 1 << s->hash_bits;
-    s->hash_mask = s->hash_size - 1;
-    s->hash_shift =  ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
-
-    s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
-    s->prev   = (Posf *)  ZALLOC(strm, s->w_size, sizeof(Pos));
-    s->head   = (Posf *)  ZALLOC(strm, s->hash_size, sizeof(Pos));
-
-    s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
-
-    overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
-    s->pending_buf = (uchf *) overlay;
-    s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
-
-    if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
-        s->pending_buf == Z_NULL) {
-        strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
-        deflateEnd (strm);
-        return Z_MEM_ERROR;
-    }
-    s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
-    s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
-
-    s->level = level;
-    s->strategy = strategy;
-    s->method = (Byte)method;
-
-    return deflateReset(strm);
-}
-
-/* ========================================================================= */
-int deflateSetDictionary (strm, dictionary, dictLength)
-    z_streamp strm;
-    const Bytef *dictionary;
-    uInt  dictLength;
-{
-    deflate_state *s;
-    uInt length = dictLength;
-    uInt n;
-    IPos hash_head = 0;
-
-    if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL)
-	return Z_STREAM_ERROR;
-
-    s = (deflate_state *) strm->state;
-    if (s->status != INIT_STATE) return Z_STREAM_ERROR;
-
-    strm->adler = adler32(strm->adler, dictionary, dictLength);
-
-    if (length < MIN_MATCH) return Z_OK;
-    if (length > MAX_DIST(s)) {
-	length = MAX_DIST(s);
-#ifndef USE_DICT_HEAD
-	dictionary += dictLength - length; /* use the tail of the dictionary */
-#endif
-    }
-    zmemcpy((charf *)s->window, dictionary, length);
-    s->strstart = length;
-    s->block_start = (long)length;
-
-    /* Insert all strings in the hash table (except for the last two bytes).
-     * s->lookahead stays null, so s->ins_h will be recomputed at the next
-     * call of fill_window.
-     */
-    s->ins_h = s->window[0];
-    UPDATE_HASH(s, s->ins_h, s->window[1]);
-    for (n = 0; n <= length - MIN_MATCH; n++) {
-	INSERT_STRING(s, n, hash_head);
-    }
-    if (hash_head) hash_head = 0;  /* to make compiler happy */
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int deflateReset (strm)
-    z_streamp strm;
-{
-    deflate_state *s;
-    
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        strm->zalloc == Z_NULL || strm->zfree == Z_NULL) return Z_STREAM_ERROR;
-
-    strm->total_in = strm->total_out = 0;
-    strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
-    strm->data_type = Z_UNKNOWN;
-
-    s = (deflate_state *)strm->state;
-    s->pending = 0;
-    s->pending_out = s->pending_buf;
-
-    if (s->noheader < 0) {
-        s->noheader = 0; /* was set to -1 by deflate(..., Z_FINISH); */
-    }
-    s->status = s->noheader ? BUSY_STATE : INIT_STATE;
-    strm->adler = 1;
-    s->last_flush = Z_NO_FLUSH;
-
-    _tr_init(s);
-    lm_init(s);
-
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int deflateParams(strm, level, strategy)
-    z_streamp strm;
-    int level;
-    int strategy;
-{
-    deflate_state *s;
-    compress_func func;
-    int err = Z_OK;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    s = (deflate_state *) strm->state;
-
-    if (level == Z_DEFAULT_COMPRESSION) {
-	level = 6;
-    }
-    if (level < 0 || level > 9 || strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
-	return Z_STREAM_ERROR;
-    }
-    func = configuration_table[s->level].func;
-
-    if (func != configuration_table[level].func && strm->total_in != 0) {
-	/* Flush the last buffer: */
-	err = deflate(strm, Z_PARTIAL_FLUSH);
-    }
-    if (s->level != level) {
-	s->level = level;
-	s->max_lazy_match   = configuration_table[level].max_lazy;
-	s->good_match       = configuration_table[level].good_length;
-	s->nice_match       = configuration_table[level].nice_length;
-	s->max_chain_length = configuration_table[level].max_chain;
-    }
-    s->strategy = strategy;
-    return err;
-}
-
-/* =========================================================================
- * Put a short in the pending buffer. The 16-bit value is put in MSB order.
- * IN assertion: the stream state is correct and there is enough room in
- * pending_buf.
- */
-local void putShortMSB (s, b)
-    deflate_state *s;
-    uInt b;
-{
-    put_byte(s, (Byte)(b >> 8));
-    put_byte(s, (Byte)(b & 0xff));
-}   
-
-/* =========================================================================
- * Flush as much pending output as possible. All deflate() output goes
- * through this function so some applications may wish to modify it
- * to avoid allocating a large strm->next_out buffer and copying into it.
- * (See also read_buf()).
- */
-local void flush_pending(strm)
-    z_streamp strm;
-{
-    deflate_state *s = (deflate_state *) strm->state;
-    unsigned len = s->pending;
-
-    if (len > strm->avail_out) len = strm->avail_out;
-    if (len == 0) return;
-
-    if (strm->next_out != Z_NULL) {
-	zmemcpy(strm->next_out, s->pending_out, len);
-	strm->next_out += len;
-    }
-    s->pending_out += len;
-    strm->total_out += len;
-    strm->avail_out  -= len;
-    s->pending -= len;
-    if (s->pending == 0) {
-        s->pending_out = s->pending_buf;
-    }
-}
-
-/* ========================================================================= */
-int deflate (strm, flush)
-    z_streamp strm;
-    int flush;
-{
-    int old_flush; /* value of flush param for previous deflate call */
-    deflate_state *s;
-
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-	flush > Z_FINISH || flush < 0) {
-        return Z_STREAM_ERROR;
-    }
-    s = (deflate_state *) strm->state;
-
-    if ((strm->next_in == Z_NULL && strm->avail_in != 0) ||
-	(s->status == FINISH_STATE && flush != Z_FINISH)) {
-        ERR_RETURN(strm, Z_STREAM_ERROR);
-    }
-    if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
-
-    s->strm = strm; /* just in case */
-    old_flush = s->last_flush;
-    s->last_flush = flush;
-
-    /* Write the zlib header */
-    if (s->status == INIT_STATE) {
-
-        uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
-        uInt level_flags = (s->level-1) >> 1;
-
-        if (level_flags > 3) level_flags = 3;
-        header |= (level_flags << 6);
-	if (s->strstart != 0) header |= PRESET_DICT;
-        header += 31 - (header % 31);
-
-        s->status = BUSY_STATE;
-        putShortMSB(s, header);
-
-	/* Save the adler32 of the preset dictionary: */
-	if (s->strstart != 0) {
-	    putShortMSB(s, (uInt)(strm->adler >> 16));
-	    putShortMSB(s, (uInt)(strm->adler & 0xffff));
-	}
-	strm->adler = 1L;
-    }
-
-    /* Flush as much pending output as possible */
-    if (s->pending != 0) {
-        flush_pending(strm);
-        if (strm->avail_out == 0) {
-	    /* Since avail_out is 0, deflate will be called again with
-	     * more output space, but possibly with both pending and
-	     * avail_in equal to zero. There won't be anything to do,
-	     * but this is not an error situation so make sure we
-	     * return OK instead of BUF_ERROR at next call of deflate:
-             */
-	    s->last_flush = -1;
-	    return Z_OK;
-	}
-
-    /* Make sure there is something to do and avoid duplicate consecutive
-     * flushes. For repeated and useless calls with Z_FINISH, we keep
-     * returning Z_STREAM_END instead of Z_BUFF_ERROR.
-     */
-    } else if (strm->avail_in == 0 && flush <= old_flush &&
-	       flush != Z_FINISH) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* User must not provide more input after the first FINISH: */
-    if (s->status == FINISH_STATE && strm->avail_in != 0) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* Start a new block or continue the current one.
-     */
-    if (strm->avail_in != 0 || s->lookahead != 0 ||
-        (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
-        block_state bstate;
-
-	bstate = (*(configuration_table[s->level].func))(s, flush);
-
-        if (bstate == finish_started || bstate == finish_done) {
-            s->status = FINISH_STATE;
-        }
-        if (bstate == need_more || bstate == finish_started) {
-	    if (strm->avail_out == 0) {
-	        s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
-	    }
-	    return Z_OK;
-	    /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
-	     * of deflate should use the same flush parameter to make sure
-	     * that the flush is complete. So we don't have to output an
-	     * empty block here, this will be done at next call. This also
-	     * ensures that for a very small output buffer, we emit at most
-	     * one empty block.
-	     */
-	}
-        if (bstate == block_done) {
-            if (flush == Z_PARTIAL_FLUSH) {
-                _tr_align(s);
-	    } else if (flush == Z_PACKET_FLUSH) {
-		/* Output just the 3-bit `stored' block type value,
-		   but not a zero length. */
-		_tr_stored_type_only(s);
-            } else { /* FULL_FLUSH or SYNC_FLUSH */
-                _tr_stored_block(s, (char*)0, 0L, 0);
-                /* For a full flush, this empty block will be recognized
-                 * as a special marker by inflate_sync().
-                 */
-                if (flush == Z_FULL_FLUSH) {
-                    CLEAR_HASH(s);             /* forget history */
-                }
-            }
-            flush_pending(strm);
-	    if (strm->avail_out == 0) {
-	      s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
-	      return Z_OK;
-	    }
-        }
-    }
-    Assert(strm->avail_out > 0, "bug2");
-
-    if (flush != Z_FINISH) return Z_OK;
-    if (s->noheader) return Z_STREAM_END;
-
-    /* Write the zlib trailer (adler32) */
-    putShortMSB(s, (uInt)(strm->adler >> 16));
-    putShortMSB(s, (uInt)(strm->adler & 0xffff));
-    flush_pending(strm);
-    /* If avail_out is zero, the application will call deflate again
-     * to flush the rest.
-     */
-    s->noheader = -1; /* write the trailer only once! */
-    return s->pending != 0 ? Z_OK : Z_STREAM_END;
-}
-
-/* ========================================================================= */
-int deflateEnd (strm)
-    z_streamp strm;
-{
-    int status;
-    deflate_state *s;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    s = (deflate_state *) strm->state;
-
-    status = s->status;
-    if (status != INIT_STATE && status != BUSY_STATE &&
-	status != FINISH_STATE) {
-      return Z_STREAM_ERROR;
-    }
-
-    /* Deallocate in reverse order of allocations: */
-    TRY_FREE(strm, s->pending_buf);
-    TRY_FREE(strm, s->head);
-    TRY_FREE(strm, s->prev);
-    TRY_FREE(strm, s->window);
-
-    ZFREE(strm, s);
-    strm->state = Z_NULL;
-
-    return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
-}
-
-/* =========================================================================
- * Copy the source state to the destination state.
- */
-int deflateCopy (dest, source)
-    z_streamp dest;
-    z_streamp source;
-{
-    deflate_state *ds;
-    deflate_state *ss;
-    ushf *overlay;
-
-    if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL)
-        return Z_STREAM_ERROR;
-    ss = (deflate_state *) source->state;
-
-    zmemcpy(dest, source, sizeof(*dest));
-
-    ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
-    if (ds == Z_NULL) return Z_MEM_ERROR;
-    dest->state = (struct internal_state FAR *) ds;
-    zmemcpy(ds, ss, sizeof(*ds));
-    ds->strm = dest;
-
-    ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
-    ds->prev   = (Posf *)  ZALLOC(dest, ds->w_size, sizeof(Pos));
-    ds->head   = (Posf *)  ZALLOC(dest, ds->hash_size, sizeof(Pos));
-    overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
-    ds->pending_buf = (uchf *) overlay;
-
-    if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
-        ds->pending_buf == Z_NULL) {
-        deflateEnd (dest);
-        return Z_MEM_ERROR;
-    }
-    /* ??? following zmemcpy doesn't work for 16-bit MSDOS */
-    zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
-    zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
-    zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
-    zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
-
-    ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
-    ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
-    ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
-
-    ds->l_desc.dyn_tree = ds->dyn_ltree;
-    ds->d_desc.dyn_tree = ds->dyn_dtree;
-    ds->bl_desc.dyn_tree = ds->bl_tree;
-
-    return Z_OK;
-}
-
-/* ===========================================================================
- * Return the number of bytes of output which are immediately available
- * for output from the decompressor.
- */
-int deflateOutputPending (strm)
-    z_streamp strm;
-{
-    if (strm == Z_NULL || strm->state == Z_NULL) return 0;
-    
-    return ((deflate_state *)(strm->state))->pending;
-}
-
-/* ===========================================================================
- * Read a new buffer from the current input stream, update the adler32
- * and total number of bytes read.  All deflate() input goes through
- * this function so some applications may wish to modify it to avoid
- * allocating a large strm->next_in buffer and copying from it.
- * (See also flush_pending()).
- */
-local int read_buf(strm, buf, size)
-    z_streamp strm;
-    charf *buf;
-    unsigned size;
-{
-    unsigned len = strm->avail_in;
-
-    if (len > size) len = size;
-    if (len == 0) return 0;
-
-    strm->avail_in  -= len;
-
-    if (!((deflate_state *)(strm->state))->noheader) {
-        strm->adler = adler32(strm->adler, strm->next_in, len);
-    }
-    zmemcpy(buf, strm->next_in, len);
-    strm->next_in  += len;
-    strm->total_in += len;
-
-    return (int)len;
-}
-
-/* ===========================================================================
- * Initialize the "longest match" routines for a new zlib stream
- */
-local void lm_init (s)
-    deflate_state *s;
-{
-    s->window_size = (ulg)2L*s->w_size;
-
-    CLEAR_HASH(s);
-
-    /* Set the default configuration parameters:
-     */
-    s->max_lazy_match   = configuration_table[s->level].max_lazy;
-    s->good_match       = configuration_table[s->level].good_length;
-    s->nice_match       = configuration_table[s->level].nice_length;
-    s->max_chain_length = configuration_table[s->level].max_chain;
-
-    s->strstart = 0;
-    s->block_start = 0L;
-    s->lookahead = 0;
-    s->match_length = s->prev_length = MIN_MATCH-1;
-    s->match_available = 0;
-    s->ins_h = 0;
-#ifdef ASMV
-    match_init(); /* initialize the asm code */
-#endif
-}
-
-/* ===========================================================================
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- * OUT assertion: the match length is not greater than s->lookahead.
- */
-#ifndef ASMV
-/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
- * match.S. The code will be functionally equivalent.
- */
-local uInt longest_match(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    unsigned chain_length = s->max_chain_length;/* max hash chain length */
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
-    int nice_match = s->nice_match;             /* stop if match long enough */
-    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-        s->strstart - (IPos)MAX_DIST(s) : NIL;
-    /* Stop when cur_match becomes <= limit. To simplify the code,
-     * we prevent matches with the string of window index 0.
-     */
-    Posf *prev = s->prev;
-    uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
-    /* Compare two bytes at a time. Note: this is not always beneficial.
-     * Try with and without -DUNALIGNED_OK to check.
-     */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
-    register ush scan_start = *(ushf*)scan;
-    register ush scan_end   = *(ushf*)(scan+best_len-1);
-#else
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-    register Byte scan_end1  = scan[best_len-1];
-    register Byte scan_end   = scan[best_len];
-#endif
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    /* Do not waste too much time if we already have a good match: */
-    if (s->prev_length >= s->good_match) {
-        chain_length >>= 2;
-    }
-    /* Do not look for matches beyond the end of the input. This is necessary
-     * to make deflate deterministic.
-     */
-    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    do {
-        Assert(cur_match < s->strstart, "no future");
-        match = s->window + cur_match;
-
-        /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2:
-         */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
-        /* This code assumes sizeof(unsigned short) == 2. Do not use
-         * UNALIGNED_OK if your compiler uses a different size.
-         */
-        if (*(ushf*)(match+best_len-1) != scan_end ||
-            *(ushf*)match != scan_start) continue;
-
-        /* It is not necessary to compare scan[2] and match[2] since they are
-         * always equal when the other bytes match, given that the hash keys
-         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
-         * strstart+3, +5, ... up to strstart+257. We check for insufficient
-         * lookahead only every 4th comparison; the 128th check will be made
-         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
-         * necessary to put more guard bytes at the end of the window, or
-         * to check more often for insufficient lookahead.
-         */
-        Assert(scan[2] == match[2], "scan[2]?");
-        scan++, match++;
-        do {
-        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 scan < strend);
-        /* The funny "do {}" generates better code on most compilers */
-
-        /* Here, scan <= window+strstart+257 */
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-        if (*scan == *match) scan++;
-
-        len = (MAX_MATCH - 1) - (int)(strend-scan);
-        scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
-        if (match[best_len]   != scan_end  ||
-            match[best_len-1] != scan_end1 ||
-            *match            != *scan     ||
-            *++match          != scan[1])      continue;
-
-        /* The check at best_len-1 can be removed because it will be made
-         * again later. (This heuristic is not always a win.)
-         * It is not necessary to compare scan[2] and match[2] since they
-         * are always equal when the other bytes match, given that
-         * the hash keys are equal and that HASH_BITS >= 8.
-         */
-        scan += 2, match++;
-        Assert(*scan == *match, "match[2]?");
-
-        /* We check for insufficient lookahead only every 8th comparison;
-         * the 256th check will be made at strstart+258.
-         */
-        do {
-        } while (*++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 scan < strend);
-
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-        len = MAX_MATCH - (int)(strend - scan);
-        scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
-        if (len > best_len) {
-            s->match_start = cur_match;
-            best_len = len;
-            if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
-            scan_end = *(ushf*)(scan+best_len-1);
-#else
-            scan_end1  = scan[best_len-1];
-            scan_end   = scan[best_len];
-#endif
-        }
-    } while ((cur_match = prev[cur_match & wmask]) > limit
-             && --chain_length != 0);
-
-    if ((uInt)best_len <= s->lookahead) return best_len;
-    return s->lookahead;
-}
-#endif /* ASMV */
-
-#ifdef DEBUG_ZLIB
-/* ===========================================================================
- * Check that the match at match_start is indeed a match.
- */
-local void check_match(s, start, match, length)
-    deflate_state *s;
-    IPos start, match;
-    int length;
-{
-    /* check that the match is indeed a match */
-    if (zmemcmp((charf *)s->window + match,
-                (charf *)s->window + start, length) != EQUAL) {
-        fprintf(stderr, " start %u, match %u, length %d\n",
-		start, match, length);
-        do {
-	    fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
-	} while (--length != 0);
-        z_error("invalid match");
-    }
-    if (z_verbose > 1) {
-        fprintf(stderr,"\\[%d,%d]", start-match, length);
-        do { putc(s->window[start++], stderr); } while (--length != 0);
-    }
-}
-#else
-#  define check_match(s, start, match, length)
-#endif
-
-/* ===========================================================================
- * Fill the window when the lookahead becomes insufficient.
- * Updates strstart and lookahead.
- *
- * IN assertion: lookahead < MIN_LOOKAHEAD
- * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
- *    At least one byte has been read, or avail_in == 0; reads are
- *    performed for at least two bytes (required for the zip translate_eol
- *    option -- not supported here).
- */
-local void fill_window(s)
-    deflate_state *s;
-{
-    register unsigned n, m;
-    register Posf *p;
-    unsigned more;    /* Amount of free space at the end of the window. */
-    uInt wsize = s->w_size;
-
-    do {
-        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
-
-        /* Deal with !@#$% 64K limit: */
-        if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
-            more = wsize;
-
-        } else if (more == (unsigned)(-1)) {
-            /* Very unlikely, but possible on 16 bit machine if strstart == 0
-             * and lookahead == 1 (input done one byte at time)
-             */
-            more--;
-
-        /* If the window is almost full and there is insufficient lookahead,
-         * move the upper half to the lower one to make room in the upper half.
-         */
-        } else if (s->strstart >= wsize+MAX_DIST(s)) {
-
-            zmemcpy((charf *)s->window, (charf *)s->window+wsize,
-                   (unsigned)wsize);
-            s->match_start -= wsize;
-            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
-            s->block_start -= (long) wsize;
-
-            /* Slide the hash table (could be avoided with 32 bit values
-               at the expense of memory usage). We slide even when level == 0
-               to keep the hash table consistent if we switch back to level > 0
-               later. (Using level 0 permanently is not an optimal usage of
-               zlib, so we don't care about this pathological case.)
-             */
-            n = s->hash_size;
-            p = &s->head[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-            } while (--n);
-
-            n = wsize;
-            p = &s->prev[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-                /* If n is not on any hash chain, prev[n] is garbage but
-                 * its value will never be used.
-                 */
-            } while (--n);
-            more += wsize;
-        }
-        if (s->strm->avail_in == 0) return;
-
-        /* If there was no sliding:
-         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
-         *    more == window_size - lookahead - strstart
-         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
-         * => more >= window_size - 2*WSIZE + 2
-         * In the BIG_MEM or MMAP case (not yet supported),
-         *   window_size == input_size + MIN_LOOKAHEAD  &&
-         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
-         * Otherwise, window_size == 2*WSIZE so more >= 2.
-         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
-         */
-        Assert(more >= 2, "more < 2");
-
-        n = read_buf(s->strm, (charf *)s->window + s->strstart + s->lookahead,
-                     more);
-        s->lookahead += n;
-
-        /* Initialize the hash value now that we have some input: */
-        if (s->lookahead >= MIN_MATCH) {
-            s->ins_h = s->window[s->strstart];
-            UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-            Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-        }
-        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
-         * but this is not important since only literal bytes will be emitted.
-         */
-
-    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
-}
-
-/* ===========================================================================
- * Flush the current block, with given end-of-file flag.
- * IN assertion: strstart is set to the end of the current match.
- */
-#define FLUSH_BLOCK_ONLY(s, eof) { \
-   _tr_flush_block(s, (s->block_start >= 0L ? \
-                   (charf *)&s->window[(unsigned)s->block_start] : \
-                   (charf *)Z_NULL), \
-		(ulg)((long)s->strstart - s->block_start), \
-		(eof)); \
-   s->block_start = s->strstart; \
-   flush_pending(s->strm); \
-   Tracev((stderr,"[FLUSH]")); \
-}
-
-/* Same but force premature exit if necessary. */
-#define FLUSH_BLOCK(s, eof) { \
-   FLUSH_BLOCK_ONLY(s, eof); \
-   if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \
-}
-
-/* ===========================================================================
- * Copy without compression as much as possible from the input stream, return
- * the current block state.
- * This function does not insert new strings in the dictionary since
- * uncompressible data is probably not useful. This function is used
- * only for the level=0 compression option.
- * NOTE: this function should be optimized to avoid extra copying from
- * window to pending_buf.
- */
-local block_state deflate_stored(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
-     * to pending_buf_size, and each stored block has a 5 byte header:
-     */
-    ulg max_block_size = 0xffff;
-    ulg max_start;
-
-    if (max_block_size > s->pending_buf_size - 5) {
-        max_block_size = s->pending_buf_size - 5;
-    }
-
-    /* Copy as much as possible from input to output: */
-    for (;;) {
-        /* Fill the window as much as possible: */
-        if (s->lookahead <= 1) {
-
-            Assert(s->strstart < s->w_size+MAX_DIST(s) ||
-		   s->block_start >= (long)s->w_size, "slide too late");
-
-            fill_window(s);
-            if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
-
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-	Assert(s->block_start >= 0L, "block gone");
-
-	s->strstart += s->lookahead;
-	s->lookahead = 0;
-
-	/* Emit a stored block if pending_buf will be full: */
- 	max_start = s->block_start + max_block_size;
-        if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
-	    /* strstart == 0 is possible when wraparound on 16-bit machine */
-	    s->lookahead = (uInt)(s->strstart - max_start);
-	    s->strstart = (uInt)max_start;
-            FLUSH_BLOCK(s, 0);
-	}
-	/* Flush if we may have to slide, otherwise block_start may become
-         * negative and the data will be gone:
-         */
-        if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
-            FLUSH_BLOCK(s, 0);
-	}
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * Compress as much as possible from the input stream, return the current
- * block state.
- * This function does not perform lazy evaluation of matches and inserts
- * new strings in the dictionary only for unmatched strings or for short
- * matches. It is used only for the fast compression options.
- */
-local block_state deflate_fast(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head = NIL; /* head of the hash chain */
-    int bflush;           /* set if current block must be flushed */
-
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-	        return need_more;
-	    }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         * At this point we have always match_length < MIN_MATCH
-         */
-        if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            if (s->strategy != Z_HUFFMAN_ONLY) {
-                s->match_length = longest_match (s, hash_head);
-            }
-            /* longest_match() sets match_start */
-        }
-        if (s->match_length >= MIN_MATCH) {
-            check_match(s, s->strstart, s->match_start, s->match_length);
-
-            bflush = _tr_tally(s, s->strstart - s->match_start,
-                               s->match_length - MIN_MATCH);
-
-            s->lookahead -= s->match_length;
-
-            /* Insert new strings in the hash table only if the match length
-             * is not too large. This saves time but degrades compression.
-             */
-            if (s->match_length <= s->max_insert_length &&
-                s->lookahead >= MIN_MATCH) {
-                s->match_length--; /* string at strstart already in hash table */
-                do {
-                    s->strstart++;
-                    INSERT_STRING(s, s->strstart, hash_head);
-                    /* strstart never exceeds WSIZE-MAX_MATCH, so there are
-                     * always MIN_MATCH bytes ahead.
-                     */
-                } while (--s->match_length != 0);
-                s->strstart++; 
-            } else {
-                s->strstart += s->match_length;
-                s->match_length = 0;
-                s->ins_h = s->window[s->strstart];
-                UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-                Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-                /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
-                 * matter since it will be recomputed at next deflate call.
-                 */
-            }
-        } else {
-            /* No match, output a literal byte */
-            Tracevv((stderr,"%c", s->window[s->strstart]));
-            bflush = _tr_tally (s, 0, s->window[s->strstart]);
-            s->lookahead--;
-            s->strstart++; 
-        }
-        if (bflush) FLUSH_BLOCK(s, 0);
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * Same as above, but achieves better compression. We use a lazy
- * evaluation for matches: a match is finally adopted only if there is
- * no better match at the next window position.
- */
-local block_state deflate_slow(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head = NIL;    /* head of hash chain */
-    int bflush;              /* set if current block must be flushed */
-
-    /* Process the input block. */
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-	        return need_more;
-	    }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         */
-        s->prev_length = s->match_length, s->prev_match = s->match_start;
-        s->match_length = MIN_MATCH-1;
-
-        if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
-            s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            if (s->strategy != Z_HUFFMAN_ONLY) {
-                s->match_length = longest_match (s, hash_head);
-            }
-            /* longest_match() sets match_start */
-
-            if (s->match_length <= 5 && (s->strategy == Z_FILTERED ||
-                 (s->match_length == MIN_MATCH &&
-                  s->strstart - s->match_start > TOO_FAR))) {
-
-                /* If prev_match is also MIN_MATCH, match_start is garbage
-                 * but we will ignore the current match anyway.
-                 */
-                s->match_length = MIN_MATCH-1;
-            }
-        }
-        /* If there was a match at the previous step and the current
-         * match is not better, output the previous match:
-         */
-        if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
-            uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
-            /* Do not insert strings in hash table beyond this. */
-
-            check_match(s, s->strstart-1, s->prev_match, s->prev_length);
-
-            bflush = _tr_tally(s, s->strstart -1 - s->prev_match,
-                               s->prev_length - MIN_MATCH);
-
-            /* Insert in hash table all strings up to the end of the match.
-             * strstart-1 and strstart are already inserted. If there is not
-             * enough lookahead, the last two strings are not inserted in
-             * the hash table.
-             */
-            s->lookahead -= s->prev_length-1;
-            s->prev_length -= 2;
-            do {
-                if (++s->strstart <= max_insert) {
-                    INSERT_STRING(s, s->strstart, hash_head);
-                }
-            } while (--s->prev_length != 0);
-            s->match_available = 0;
-            s->match_length = MIN_MATCH-1;
-            s->strstart++;
-
-            if (bflush) FLUSH_BLOCK(s, 0);
-
-        } else if (s->match_available) {
-            /* If there was no match at the previous position, output a
-             * single literal. If there was a match but the current match
-             * is longer, truncate the previous match to a single literal.
-             */
-            Tracevv((stderr,"%c", s->window[s->strstart-1]));
-            if (_tr_tally (s, 0, s->window[s->strstart-1])) {
-                FLUSH_BLOCK_ONLY(s, 0);
-            }
-            s->strstart++;
-            s->lookahead--;
-            if (s->strm->avail_out == 0) return need_more;
-        } else {
-            /* There is no previous match to compare with, wait for
-             * the next step to decide.
-             */
-            s->match_available = 1;
-            s->strstart++;
-            s->lookahead--;
-        }
-    }
-    Assert (flush != Z_NO_FLUSH, "no flush?");
-    if (s->match_available) {
-        Tracevv((stderr,"%c", s->window[s->strstart-1]));
-        _tr_tally (s, 0, s->window[s->strstart-1]);
-        s->match_available = 0;
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-/* --- deflate.c */
-
-/* +++ trees.c */
-/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-1996 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process uses several Huffman trees. The more
- *      common source values are represented by shorter bit sequences.
- *
- *      Each code tree is stored in a compressed form which is itself
- * a Huffman encoding of the lengths of all the code strings (in
- * ascending order by source values).  The actual code strings are
- * reconstructed from the lengths in the inflate process, as described
- * in the deflate specification.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- *      Storer, James A.
- *          Data Compression:  Methods and Theory, pp. 49-50.
- *          Computer Science Press, 1988.  ISBN 0-7167-8156-5.
- *
- *      Sedgewick, R.
- *          Algorithms, p290.
- *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
- */
-
-/* From: trees.c,v 1.11 1996/07/24 13:41:06 me Exp $ */
-
-/* #include "deflate.h" */
-
-#ifdef DEBUG_ZLIB
-#  include <ctype.h>
-#endif
-
-/* ===========================================================================
- * Constants
- */
-
-#define MAX_BL_BITS 7
-/* Bit length codes must not exceed MAX_BL_BITS bits */
-
-#define END_BLOCK 256
-/* end of block literal code */
-
-#define REP_3_6      16
-/* repeat previous bit length 3-6 times (2 bits of repeat count) */
-
-#define REPZ_3_10    17
-/* repeat a zero length 3-10 times  (3 bits of repeat count) */
-
-#define REPZ_11_138  18
-/* repeat a zero length 11-138 times  (7 bits of repeat count) */
-
-local int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
-   = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
-
-local int extra_dbits[D_CODES] /* extra bits for each distance code */
-   = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
-
-local int extra_blbits[BL_CODES]/* extra bits for each bit length code */
-   = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
-
-local uch bl_order[BL_CODES]
-   = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
-/* The lengths of the bit length codes are sent in order of decreasing
- * probability, to avoid transmitting the lengths for unused bit length codes.
- */
-
-#define Buf_size (8 * 2*sizeof(char))
-/* Number of bits used within bi_buf. (bi_buf might be implemented on
- * more than 16 bits on some systems.)
- */
-
-/* ===========================================================================
- * Local data. These are initialized only once.
- */
-
-local ct_data static_ltree[L_CODES+2];
-/* The static literal tree. Since the bit lengths are imposed, there is no
- * need for the L_CODES extra codes used during heap construction. However
- * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
- * below).
- */
-
-local ct_data static_dtree[D_CODES];
-/* The static distance tree. (Actually a trivial tree since all codes use
- * 5 bits.)
- */
-
-local uch dist_code[512];
-/* distance codes. The first 256 values correspond to the distances
- * 3 .. 258, the last 256 values correspond to the top 8 bits of
- * the 15 bit distances.
- */
-
-local uch length_code[MAX_MATCH-MIN_MATCH+1];
-/* length code for each normalized match length (0 == MIN_MATCH) */
-
-local int base_length[LENGTH_CODES];
-/* First normalized length for each code (0 = MIN_MATCH) */
-
-local int base_dist[D_CODES];
-/* First normalized distance for each code (0 = distance of 1) */
-
-struct static_tree_desc_s {
-    ct_data *static_tree;        /* static tree or NULL */
-    intf    *extra_bits;         /* extra bits for each code or NULL */
-    int     extra_base;          /* base index for extra_bits */
-    int     elems;               /* max number of elements in the tree */
-    int     max_length;          /* max bit length for the codes */
-};
-
-local static_tree_desc  static_l_desc =
-{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
-
-local static_tree_desc  static_d_desc =
-{static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
-
-local static_tree_desc  static_bl_desc =
-{(ct_data *)0, extra_blbits, 0,      BL_CODES, MAX_BL_BITS};
-
-/* ===========================================================================
- * Local (static) routines in this file.
- */
-
-local void tr_static_init OF((void));
-local void init_block     OF((deflate_state *s));
-local void pqdownheap     OF((deflate_state *s, ct_data *tree, int k));
-local void gen_bitlen     OF((deflate_state *s, tree_desc *desc));
-local void gen_codes      OF((ct_data *tree, int max_code, ushf *bl_count));
-local void build_tree     OF((deflate_state *s, tree_desc *desc));
-local void scan_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local void send_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local int  build_bl_tree  OF((deflate_state *s));
-local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
-                              int blcodes));
-local void compress_block OF((deflate_state *s, ct_data *ltree,
-                              ct_data *dtree));
-local void set_data_type  OF((deflate_state *s));
-local unsigned bi_reverse OF((unsigned value, int length));
-local void bi_windup      OF((deflate_state *s));
-local void bi_flush       OF((deflate_state *s));
-local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
-                              int header));
-
-#ifndef DEBUG_ZLIB
-#  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
-   /* Send a code of the given tree. c and tree must not have side effects */
-
-#else /* DEBUG_ZLIB */
-#  define send_code(s, c, tree) \
-     { if (verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
-       send_bits(s, tree[c].Code, tree[c].Len); }
-#endif
-
-#define d_code(dist) \
-   ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. dist_code[256] and dist_code[257] are never
- * used.
- */
-
-/* ===========================================================================
- * Output a short LSB first on the stream.
- * IN assertion: there is enough room in pendingBuf.
- */
-#define put_short(s, w) { \
-    put_byte(s, (uch)((w) & 0xff)); \
-    put_byte(s, (uch)((ush)(w) >> 8)); \
-}
-
-/* ===========================================================================
- * Send a value on a given number of bits.
- * IN assertion: length <= 16 and value fits in length bits.
- */
-#ifdef DEBUG_ZLIB
-local void send_bits      OF((deflate_state *s, int value, int length));
-
-local void send_bits(s, value, length)
-    deflate_state *s;
-    int value;  /* value to send */
-    int length; /* number of bits */
-{
-    Tracevv((stderr," l %2d v %4x ", length, value));
-    Assert(length > 0 && length <= 15, "invalid length");
-    s->bits_sent += (ulg)length;
-
-    /* If not enough room in bi_buf, use (valid) bits from bi_buf and
-     * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
-     * unused bits in value.
-     */
-    if (s->bi_valid > (int)Buf_size - length) {
-        s->bi_buf |= (value << s->bi_valid);
-        put_short(s, s->bi_buf);
-        s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
-        s->bi_valid += length - Buf_size;
-    } else {
-        s->bi_buf |= value << s->bi_valid;
-        s->bi_valid += length;
-    }
-}
-#else /* !DEBUG_ZLIB */
-
-#define send_bits(s, value, length) \
-{ int len = length;\
-  if (s->bi_valid > (int)Buf_size - len) {\
-    int val = value;\
-    s->bi_buf |= (val << s->bi_valid);\
-    put_short(s, s->bi_buf);\
-    s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
-    s->bi_valid += len - Buf_size;\
-  } else {\
-    s->bi_buf |= (value) << s->bi_valid;\
-    s->bi_valid += len;\
-  }\
-}
-#endif /* DEBUG_ZLIB */
-
-
-#define MAX(a,b) (a >= b ? a : b)
-/* the arguments must not have side effects */
-
-/* ===========================================================================
- * Initialize the various 'constant' tables. In a multi-threaded environment,
- * this function may be called by two threads concurrently, but this is
- * harmless since both invocations do exactly the same thing.
- */
-local void tr_static_init()
-{
-    static int static_init_done = 0;
-    int n;        /* iterates over tree elements */
-    int bits;     /* bit counter */
-    int length;   /* length value */
-    int code;     /* code value */
-    int dist;     /* distance index */
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    if (static_init_done) return;
-
-    /* Initialize the mapping length (0..255) -> length code (0..28) */
-    length = 0;
-    for (code = 0; code < LENGTH_CODES-1; code++) {
-        base_length[code] = length;
-        for (n = 0; n < (1<<extra_lbits[code]); n++) {
-            length_code[length++] = (uch)code;
-        }
-    }
-    Assert (length == 256, "tr_static_init: length != 256");
-    /* Note that the length 255 (match length 258) can be represented
-     * in two different ways: code 284 + 5 bits or code 285, so we
-     * overwrite length_code[255] to use the best encoding:
-     */
-    length_code[length-1] = (uch)code;
-
-    /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
-    dist = 0;
-    for (code = 0 ; code < 16; code++) {
-        base_dist[code] = dist;
-        for (n = 0; n < (1<<extra_dbits[code]); n++) {
-            dist_code[dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "tr_static_init: dist != 256");
-    dist >>= 7; /* from now on, all distances are divided by 128 */
-    for ( ; code < D_CODES; code++) {
-        base_dist[code] = dist << 7;
-        for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
-            dist_code[256 + dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "tr_static_init: 256+dist != 512");
-
-    /* Construct the codes of the static literal tree */
-    for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
-    n = 0;
-    while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
-    while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
-    while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
-    while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
-    /* Codes 286 and 287 do not exist, but we must include them in the
-     * tree construction to get a canonical Huffman tree (longest code
-     * all ones)
-     */
-    gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
-
-    /* The static distance tree is trivial: */
-    for (n = 0; n < D_CODES; n++) {
-        static_dtree[n].Len = 5;
-        static_dtree[n].Code = bi_reverse((unsigned)n, 5);
-    }
-    static_init_done = 1;
-}
-
-/* ===========================================================================
- * Initialize the tree data structures for a new zlib stream.
- */
-void _tr_init(s)
-    deflate_state *s;
-{
-    tr_static_init();
-
-    s->compressed_len = 0L;
-
-    s->l_desc.dyn_tree = s->dyn_ltree;
-    s->l_desc.stat_desc = &static_l_desc;
-
-    s->d_desc.dyn_tree = s->dyn_dtree;
-    s->d_desc.stat_desc = &static_d_desc;
-
-    s->bl_desc.dyn_tree = s->bl_tree;
-    s->bl_desc.stat_desc = &static_bl_desc;
-
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-    s->last_eob_len = 8; /* enough lookahead for inflate */
-#ifdef DEBUG_ZLIB
-    s->bits_sent = 0L;
-#endif
-
-    /* Initialize the first block of the first file: */
-    init_block(s);
-}
-
-/* ===========================================================================
- * Initialize a new block.
- */
-local void init_block(s)
-    deflate_state *s;
-{
-    int n; /* iterates over tree elements */
-
-    /* Initialize the trees. */
-    for (n = 0; n < L_CODES;  n++) s->dyn_ltree[n].Freq = 0;
-    for (n = 0; n < D_CODES;  n++) s->dyn_dtree[n].Freq = 0;
-    for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
-
-    s->dyn_ltree[END_BLOCK].Freq = 1;
-    s->opt_len = s->static_len = 0L;
-    s->last_lit = s->matches = 0;
-}
-
-#define SMALLEST 1
-/* Index within the heap array of least frequent node in the Huffman tree */
-
-
-/* ===========================================================================
- * Remove the smallest element from the heap and recreate the heap with
- * one less element. Updates heap and heap_len.
- */
-#define pqremove(s, tree, top) \
-{\
-    top = s->heap[SMALLEST]; \
-    s->heap[SMALLEST] = s->heap[s->heap_len--]; \
-    pqdownheap(s, tree, SMALLEST); \
-}
-
-/* ===========================================================================
- * Compares to subtrees, using the tree depth as tie breaker when
- * the subtrees have equal frequency. This minimizes the worst case length.
- */
-#define smaller(tree, n, m, depth) \
-   (tree[n].Freq < tree[m].Freq || \
-   (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
-
-/* ===========================================================================
- * Restore the heap property by moving down the tree starting at node k,
- * exchanging a node with the smallest of its two sons if necessary, stopping
- * when the heap property is re-established (each father smaller than its
- * two sons).
- */
-local void pqdownheap(s, tree, k)
-    deflate_state *s;
-    ct_data *tree;  /* the tree to restore */
-    int k;               /* node to move down */
-{
-    int v = s->heap[k];
-    int j = k << 1;  /* left son of k */
-    while (j <= s->heap_len) {
-        /* Set j to the smallest of the two sons: */
-        if (j < s->heap_len &&
-            smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
-            j++;
-        }
-        /* Exit if v is smaller than both sons */
-        if (smaller(tree, v, s->heap[j], s->depth)) break;
-
-        /* Exchange v with the smallest son */
-        s->heap[k] = s->heap[j];  k = j;
-
-        /* And continue down the tree, setting j to the left son of k */
-        j <<= 1;
-    }
-    s->heap[k] = v;
-}
-
-/* ===========================================================================
- * Compute the optimal bit lengths for a tree and update the total bit length
- * for the current block.
- * IN assertion: the fields freq and dad are set, heap[heap_max] and
- *    above are the tree nodes sorted by increasing frequency.
- * OUT assertions: the field len is set to the optimal bit length, the
- *     array bl_count contains the frequencies for each bit length.
- *     The length opt_len is updated; static_len is also updated if stree is
- *     not null.
- */
-local void gen_bitlen(s, desc)
-    deflate_state *s;
-    tree_desc *desc;    /* the tree descriptor */
-{
-    ct_data *tree  = desc->dyn_tree;
-    int max_code   = desc->max_code;
-    ct_data *stree = desc->stat_desc->static_tree;
-    intf *extra    = desc->stat_desc->extra_bits;
-    int base       = desc->stat_desc->extra_base;
-    int max_length = desc->stat_desc->max_length;
-    int h;              /* heap index */
-    int n, m;           /* iterate over the tree elements */
-    int bits;           /* bit length */
-    int xbits;          /* extra bits */
-    ush f;              /* frequency */
-    int overflow = 0;   /* number of elements with bit length too large */
-
-    for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
-
-    /* In a first pass, compute the optimal bit lengths (which may
-     * overflow in the case of the bit length tree).
-     */
-    tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
-
-    for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
-        n = s->heap[h];
-        bits = tree[tree[n].Dad].Len + 1;
-        if (bits > max_length) bits = max_length, overflow++;
-        tree[n].Len = (ush)bits;
-        /* We overwrite tree[n].Dad which is no longer needed */
-
-        if (n > max_code) continue; /* not a leaf node */
-
-        s->bl_count[bits]++;
-        xbits = 0;
-        if (n >= base) xbits = extra[n-base];
-        f = tree[n].Freq;
-        s->opt_len += (ulg)f * (bits + xbits);
-        if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
-    }
-    if (overflow == 0) return;
-
-    Trace((stderr,"\nbit length overflow\n"));
-    /* This happens for example on obj2 and pic of the Calgary corpus */
-
-    /* Find the first bit length which could increase: */
-    do {
-        bits = max_length-1;
-        while (s->bl_count[bits] == 0) bits--;
-        s->bl_count[bits]--;      /* move one leaf down the tree */
-        s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
-        s->bl_count[max_length]--;
-        /* The brother of the overflow item also moves one step up,
-         * but this does not affect bl_count[max_length]
-         */
-        overflow -= 2;
-    } while (overflow > 0);
-
-    /* Now recompute all bit lengths, scanning in increasing frequency.
-     * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
-     * lengths instead of fixing only the wrong ones. This idea is taken
-     * from 'ar' written by Haruhiko Okumura.)
-     */
-    for (bits = max_length; bits != 0; bits--) {
-        n = s->bl_count[bits];
-        while (n != 0) {
-            m = s->heap[--h];
-            if (m > max_code) continue;
-            if (tree[m].Len != (unsigned) bits) {
-                Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
-                s->opt_len += ((long)bits - (long)tree[m].Len)
-                              *(long)tree[m].Freq;
-                tree[m].Len = (ush)bits;
-            }
-            n--;
-        }
-    }
-}
-
-/* ===========================================================================
- * Generate the codes for a given tree and bit counts (which need not be
- * optimal).
- * IN assertion: the array bl_count contains the bit length statistics for
- * the given tree and the field len is set for all tree elements.
- * OUT assertion: the field code is set for all tree elements of non
- *     zero code length.
- */
-local void gen_codes (tree, max_code, bl_count)
-    ct_data *tree;             /* the tree to decorate */
-    int max_code;              /* largest code with non zero frequency */
-    ushf *bl_count;            /* number of codes at each bit length */
-{
-    ush next_code[MAX_BITS+1]; /* next code value for each bit length */
-    ush code = 0;              /* running code value */
-    int bits;                  /* bit index */
-    int n;                     /* code index */
-
-    /* The distribution counts are first used to generate the code values
-     * without bit reversal.
-     */
-    for (bits = 1; bits <= MAX_BITS; bits++) {
-        next_code[bits] = code = (code + bl_count[bits-1]) << 1;
-    }
-    /* Check that the bit counts in bl_count are consistent. The last code
-     * must be all ones.
-     */
-    Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
-            "inconsistent bit counts");
-    Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
-
-    for (n = 0;  n <= max_code; n++) {
-        int len = tree[n].Len;
-        if (len == 0) continue;
-        /* Now reverse the bits */
-        tree[n].Code = bi_reverse(next_code[len]++, len);
-
-        Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
-             n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
-    }
-}
-
-/* ===========================================================================
- * Construct one Huffman tree and assigns the code bit strings and lengths.
- * Update the total bit length for the current block.
- * IN assertion: the field freq is set for all tree elements.
- * OUT assertions: the fields len and code are set to the optimal bit length
- *     and corresponding code. The length opt_len is updated; static_len is
- *     also updated if stree is not null. The field max_code is set.
- */
-local void build_tree(s, desc)
-    deflate_state *s;
-    tree_desc *desc; /* the tree descriptor */
-{
-    ct_data *tree   = desc->dyn_tree;
-    ct_data *stree  = desc->stat_desc->static_tree;
-    int elems       = desc->stat_desc->elems;
-    int n, m;          /* iterate over heap elements */
-    int max_code = -1; /* largest code with non zero frequency */
-    int node;          /* new node being created */
-
-    /* Construct the initial heap, with least frequent element in
-     * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
-     * heap[0] is not used.
-     */
-    s->heap_len = 0, s->heap_max = HEAP_SIZE;
-
-    for (n = 0; n < elems; n++) {
-        if (tree[n].Freq != 0) {
-            s->heap[++(s->heap_len)] = max_code = n;
-            s->depth[n] = 0;
-        } else {
-            tree[n].Len = 0;
-        }
-    }
-
-    /* The pkzip format requires that at least one distance code exists,
-     * and that at least one bit should be sent even if there is only one
-     * possible code. So to avoid special checks later on we force at least
-     * two codes of non zero frequency.
-     */
-    while (s->heap_len < 2) {
-        node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
-        tree[node].Freq = 1;
-        s->depth[node] = 0;
-        s->opt_len--; if (stree) s->static_len -= stree[node].Len;
-        /* node is 0 or 1 so it does not have extra bits */
-    }
-    desc->max_code = max_code;
-
-    /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
-     * establish sub-heaps of increasing lengths:
-     */
-    for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
-
-    /* Construct the Huffman tree by repeatedly combining the least two
-     * frequent nodes.
-     */
-    node = elems;              /* next internal node of the tree */
-    do {
-        pqremove(s, tree, n);  /* n = node of least frequency */
-        m = s->heap[SMALLEST]; /* m = node of next least frequency */
-
-        s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
-        s->heap[--(s->heap_max)] = m;
-
-        /* Create a new node father of n and m */
-        tree[node].Freq = tree[n].Freq + tree[m].Freq;
-        s->depth[node] = (uch) (MAX(s->depth[n], s->depth[m]) + 1);
-        tree[n].Dad = tree[m].Dad = (ush)node;
-#ifdef DUMP_BL_TREE
-        if (tree == s->bl_tree) {
-            fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
-                    node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
-        }
-#endif
-        /* and insert the new node in the heap */
-        s->heap[SMALLEST] = node++;
-        pqdownheap(s, tree, SMALLEST);
-
-    } while (s->heap_len >= 2);
-
-    s->heap[--(s->heap_max)] = s->heap[SMALLEST];
-
-    /* At this point, the fields freq and dad are set. We can now
-     * generate the bit lengths.
-     */
-    gen_bitlen(s, (tree_desc *)desc);
-
-    /* The field len is now set, we can generate the bit codes */
-    gen_codes ((ct_data *)tree, max_code, s->bl_count);
-}
-
-/* ===========================================================================
- * Scan a literal or distance tree to determine the frequencies of the codes
- * in the bit length tree.
- */
-local void scan_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree;   /* the tree to be scanned */
-    int max_code;    /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    if (nextlen == 0) max_count = 138, min_count = 3;
-    tree[max_code+1].Len = (ush)0xffff; /* guard */
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            s->bl_tree[curlen].Freq += count;
-        } else if (curlen != 0) {
-            if (curlen != prevlen) s->bl_tree[curlen].Freq++;
-            s->bl_tree[REP_3_6].Freq++;
-        } else if (count <= 10) {
-            s->bl_tree[REPZ_3_10].Freq++;
-        } else {
-            s->bl_tree[REPZ_11_138].Freq++;
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Send a literal or distance tree in compressed form, using the codes in
- * bl_tree.
- */
-local void send_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree; /* the tree to be scanned */
-    int max_code;       /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    /* tree[max_code+1].Len = -1; */  /* guard already set */
-    if (nextlen == 0) max_count = 138, min_count = 3;
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
-
-        } else if (curlen != 0) {
-            if (curlen != prevlen) {
-                send_code(s, curlen, s->bl_tree); count--;
-            }
-            Assert(count >= 3 && count <= 6, " 3_6?");
-            send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
-
-        } else if (count <= 10) {
-            send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
-
-        } else {
-            send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Construct the Huffman tree for the bit lengths and return the index in
- * bl_order of the last bit length code to send.
- */
-local int build_bl_tree(s)
-    deflate_state *s;
-{
-    int max_blindex;  /* index of last bit length code of non zero freq */
-
-    /* Determine the bit length frequencies for literal and distance trees */
-    scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
-    scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
-
-    /* Build the bit length tree: */
-    build_tree(s, (tree_desc *)(&(s->bl_desc)));
-    /* opt_len now includes the length of the tree representations, except
-     * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
-     */
-
-    /* Determine the number of bit length codes to send. The pkzip format
-     * requires that at least 4 bit length codes be sent. (appnote.txt says
-     * 3 but the actual value used is 4.)
-     */
-    for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
-        if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
-    }
-    /* Update opt_len to include the bit length tree and counts */
-    s->opt_len += 3*(max_blindex+1) + 5+5+4;
-    Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
-            s->opt_len, s->static_len));
-
-    return max_blindex;
-}
-
-/* ===========================================================================
- * Send the header for a block using dynamic Huffman trees: the counts, the
- * lengths of the bit length codes, the literal tree and the distance tree.
- * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
- */
-local void send_all_trees(s, lcodes, dcodes, blcodes)
-    deflate_state *s;
-    int lcodes, dcodes, blcodes; /* number of codes for each tree */
-{
-    int rank;                    /* index in bl_order */
-
-    Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
-    Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
-            "too many codes");
-    Tracev((stderr, "\nbl counts: "));
-    send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
-    send_bits(s, dcodes-1,   5);
-    send_bits(s, blcodes-4,  4); /* not -3 as stated in appnote.txt */
-    for (rank = 0; rank < blcodes; rank++) {
-        Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
-        send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
-    }
-    Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
-    Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
-    Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
-}
-
-/* ===========================================================================
- * Send a stored block
- */
-void _tr_stored_block(s, buf, stored_len, eof)
-    deflate_state *s;
-    charf *buf;       /* input block */
-    ulg stored_len;   /* length of input block */
-    int eof;          /* true if this is the last block for a file */
-{
-    send_bits(s, (STORED_BLOCK<<1)+eof, 3);  /* send block type */
-    s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
-    s->compressed_len += (stored_len + 4) << 3;
-
-    copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
-}
-
-/* Send just the `stored block' type code without any length bytes or data.
- */
-void _tr_stored_type_only(s)
-    deflate_state *s;
-{
-    send_bits(s, (STORED_BLOCK << 1), 3);
-    bi_windup(s);
-    s->compressed_len = (s->compressed_len + 3) & ~7L;
-}
-
-
-/* ===========================================================================
- * Send one empty static block to give enough lookahead for inflate.
- * This takes 10 bits, of which 7 may remain in the bit buffer.
- * The current inflate code requires 9 bits of lookahead. If the
- * last two codes for the previous block (real code plus EOB) were coded
- * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
- * the last real code. In this case we send two empty static blocks instead
- * of one. (There are no problems if the previous block is stored or fixed.)
- * To simplify the code, we assume the worst case of last real code encoded
- * on one bit only.
- */
-void _tr_align(s)
-    deflate_state *s;
-{
-    send_bits(s, STATIC_TREES<<1, 3);
-    send_code(s, END_BLOCK, static_ltree);
-    s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
-    bi_flush(s);
-    /* Of the 10 bits for the empty block, we have already sent
-     * (10 - bi_valid) bits. The lookahead for the last real code (before
-     * the EOB of the previous block) was thus at least one plus the length
-     * of the EOB plus what we have just sent of the empty static block.
-     */
-    if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
-        send_bits(s, STATIC_TREES<<1, 3);
-        send_code(s, END_BLOCK, static_ltree);
-        s->compressed_len += 10L;
-        bi_flush(s);
-    }
-    s->last_eob_len = 7;
-}
-
-/* ===========================================================================
- * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file. This function
- * returns the total compressed length for the file so far.
- */
-ulg _tr_flush_block(s, buf, stored_len, eof)
-    deflate_state *s;
-    charf *buf;       /* input block, or NULL if too old */
-    ulg stored_len;   /* length of input block */
-    int eof;          /* true if this is the last block for a file */
-{
-    ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
-    int max_blindex = 0;  /* index of last bit length code of non zero freq */
-
-    /* Build the Huffman trees unless a stored block is forced */
-    if (s->level > 0) {
-
-	 /* Check if the file is ascii or binary */
-	if (s->data_type == Z_UNKNOWN) set_data_type(s);
-
-	/* Construct the literal and distance trees */
-	build_tree(s, (tree_desc *)(&(s->l_desc)));
-	Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
-		s->static_len));
-
-	build_tree(s, (tree_desc *)(&(s->d_desc)));
-	Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
-		s->static_len));
-	/* At this point, opt_len and static_len are the total bit lengths of
-	 * the compressed block data, excluding the tree representations.
-	 */
-
-	/* Build the bit length tree for the above two trees, and get the index
-	 * in bl_order of the last bit length code to send.
-	 */
-	max_blindex = build_bl_tree(s);
-
-	/* Determine the best encoding. Compute first the block length in bytes*/
-	opt_lenb = (s->opt_len+3+7)>>3;
-	static_lenb = (s->static_len+3+7)>>3;
-
-	Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
-		opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
-		s->last_lit));
-
-	if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
-
-    } else {
-        Assert(buf != (char*)0, "lost buf");
-	opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
-    }
-
-    /* If compression failed and this is the first and last block,
-     * and if the .zip file can be seeked (to rewrite the local header),
-     * the whole file is transformed into a stored file:
-     */
-#ifdef STORED_FILE_OK
-#  ifdef FORCE_STORED_FILE
-    if (eof && s->compressed_len == 0L) { /* force stored file */
-#  else
-    if (stored_len <= opt_lenb && eof && s->compressed_len==0L && seekable()) {
-#  endif
-        /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */
-        if (buf == (charf*)0) error ("block vanished");
-
-        copy_block(s, buf, (unsigned)stored_len, 0); /* without header */
-        s->compressed_len = stored_len << 3;
-        s->method = STORED;
-    } else
-#endif /* STORED_FILE_OK */
-
-#ifdef FORCE_STORED
-    if (buf != (char*)0) { /* force stored block */
-#else
-    if (stored_len+4 <= opt_lenb && buf != (char*)0) {
-                       /* 4: two words for the lengths */
-#endif
-        /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
-         * Otherwise we can't have processed more than WSIZE input bytes since
-         * the last block flush, because compression would have been
-         * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
-         * transform a block into a stored block.
-         */
-        _tr_stored_block(s, buf, stored_len, eof);
-
-#ifdef FORCE_STATIC
-    } else if (static_lenb >= 0) { /* force static trees */
-#else
-    } else if (static_lenb == opt_lenb) {
-#endif
-        send_bits(s, (STATIC_TREES<<1)+eof, 3);
-        compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
-        s->compressed_len += 3 + s->static_len;
-    } else {
-        send_bits(s, (DYN_TREES<<1)+eof, 3);
-        send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
-                       max_blindex+1);
-        compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
-        s->compressed_len += 3 + s->opt_len;
-    }
-    Assert (s->compressed_len == s->bits_sent, "bad compressed size");
-    init_block(s);
-
-    if (eof) {
-        bi_windup(s);
-        s->compressed_len += 7;  /* align on byte boundary */
-    }
-    Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
-           s->compressed_len-7*eof));
-
-    return s->compressed_len >> 3;
-}
-
-/* ===========================================================================
- * Save the match info and tally the frequency counts. Return true if
- * the current block must be flushed.
- */
-int _tr_tally (s, dist, lc)
-    deflate_state *s;
-    unsigned dist;  /* distance of matched string */
-    unsigned lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */
-{
-    s->d_buf[s->last_lit] = (ush)dist;
-    s->l_buf[s->last_lit++] = (uch)lc;
-    if (dist == 0) {
-        /* lc is the unmatched char */
-        s->dyn_ltree[lc].Freq++;
-    } else {
-        s->matches++;
-        /* Here, lc is the match length - MIN_MATCH */
-        dist--;             /* dist = match distance - 1 */
-        Assert((ush)dist < (ush)MAX_DIST(s) &&
-               (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
-               (ush)d_code(dist) < (ush)D_CODES,  "_tr_tally: bad match");
-
-        s->dyn_ltree[length_code[lc]+LITERALS+1].Freq++;
-        s->dyn_dtree[d_code(dist)].Freq++;
-    }
-
-    /* Try to guess if it is profitable to stop the current block here */
-    if (s->level > 2 && (s->last_lit & 0xfff) == 0) {
-        /* Compute an upper bound for the compressed length */
-        ulg out_length = (ulg)s->last_lit*8L;
-        ulg in_length = (ulg)((long)s->strstart - s->block_start);
-        int dcode;
-        for (dcode = 0; dcode < D_CODES; dcode++) {
-            out_length += (ulg)s->dyn_dtree[dcode].Freq *
-                (5L+extra_dbits[dcode]);
-        }
-        out_length >>= 3;
-        Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
-               s->last_lit, in_length, out_length,
-               100L - out_length*100L/in_length));
-        if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
-    }
-    return (s->last_lit == s->lit_bufsize-1);
-    /* We avoid equality with lit_bufsize because of wraparound at 64K
-     * on 16 bit machines and because stored blocks are restricted to
-     * 64K-1 bytes.
-     */
-}
-
-/* ===========================================================================
- * Send the block data compressed using the given Huffman trees
- */
-local void compress_block(s, ltree, dtree)
-    deflate_state *s;
-    ct_data *ltree; /* literal tree */
-    ct_data *dtree; /* distance tree */
-{
-    unsigned dist;      /* distance of matched string */
-    int lc;             /* match length or unmatched char (if dist == 0) */
-    unsigned lx = 0;    /* running index in l_buf */
-    unsigned code;      /* the code to send */
-    int extra;          /* number of extra bits to send */
-
-    if (s->last_lit != 0) do {
-        dist = s->d_buf[lx];
-        lc = s->l_buf[lx++];
-        if (dist == 0) {
-            send_code(s, lc, ltree); /* send a literal byte */
-            Tracecv(isgraph(lc), (stderr," '%c' ", lc));
-        } else {
-            /* Here, lc is the match length - MIN_MATCH */
-            code = length_code[lc];
-            send_code(s, code+LITERALS+1, ltree); /* send the length code */
-            extra = extra_lbits[code];
-            if (extra != 0) {
-                lc -= base_length[code];
-                send_bits(s, lc, extra);       /* send the extra length bits */
-            }
-            dist--; /* dist is now the match distance - 1 */
-            code = d_code(dist);
-            Assert (code < D_CODES, "bad d_code");
-
-            send_code(s, code, dtree);       /* send the distance code */
-            extra = extra_dbits[code];
-            if (extra != 0) {
-                dist -= base_dist[code];
-                send_bits(s, dist, extra);   /* send the extra distance bits */
-            }
-        } /* literal or match pair ? */
-
-        /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
-        Assert(s->pending < s->lit_bufsize + 2*lx, "pendingBuf overflow");
-
-    } while (lx < s->last_lit);
-
-    send_code(s, END_BLOCK, ltree);
-    s->last_eob_len = ltree[END_BLOCK].Len;
-}
-
-/* ===========================================================================
- * Set the data type to ASCII or BINARY, using a crude approximation:
- * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
- * IN assertion: the fields freq of dyn_ltree are set and the total of all
- * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
- */
-local void set_data_type(s)
-    deflate_state *s;
-{
-    int n = 0;
-    unsigned ascii_freq = 0;
-    unsigned bin_freq = 0;
-    while (n < 7)        bin_freq += s->dyn_ltree[n++].Freq;
-    while (n < 128)    ascii_freq += s->dyn_ltree[n++].Freq;
-    while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq;
-    s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII);
-}
-
-/* ===========================================================================
- * Reverse the first len bits of a code, using straightforward code (a faster
- * method would use a table)
- * IN assertion: 1 <= len <= 15
- */
-local unsigned bi_reverse(code, len)
-    unsigned code; /* the value to invert */
-    int len;       /* its bit length */
-{
-    register unsigned res = 0;
-    do {
-        res |= code & 1;
-        code >>= 1, res <<= 1;
-    } while (--len > 0);
-    return res >> 1;
-}
-
-/* ===========================================================================
- * Flush the bit buffer, keeping at most 7 bits in it.
- */
-local void bi_flush(s)
-    deflate_state *s;
-{
-    if (s->bi_valid == 16) {
-        put_short(s, s->bi_buf);
-        s->bi_buf = 0;
-        s->bi_valid = 0;
-    } else if (s->bi_valid >= 8) {
-        put_byte(s, (Byte)s->bi_buf);
-        s->bi_buf >>= 8;
-        s->bi_valid -= 8;
-    }
-}
-
-/* ===========================================================================
- * Flush the bit buffer and align the output on a byte boundary
- */
-local void bi_windup(s)
-    deflate_state *s;
-{
-    if (s->bi_valid > 8) {
-        put_short(s, s->bi_buf);
-    } else if (s->bi_valid > 0) {
-        put_byte(s, (Byte)s->bi_buf);
-    }
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-#ifdef DEBUG_ZLIB
-    s->bits_sent = (s->bits_sent+7) & ~7;
-#endif
-}
-
-/* ===========================================================================
- * Copy a stored block, storing first the length and its
- * one's complement if requested.
- */
-local void copy_block(s, buf, len, header)
-    deflate_state *s;
-    charf    *buf;    /* the input data */
-    unsigned len;     /* its length */
-    int      header;  /* true if block header must be written */
-{
-    bi_windup(s);        /* align on byte boundary */
-    s->last_eob_len = 8; /* enough lookahead for inflate */
-
-    if (header) {
-        put_short(s, (ush)len);   
-        put_short(s, (ush)~len);
-#ifdef DEBUG_ZLIB
-        s->bits_sent += 2*16;
-#endif
-    }
-#ifdef DEBUG_ZLIB
-    s->bits_sent += (ulg)len<<3;
-#endif
-    /* bundle up the put_byte(s, *buf++) calls */
-    zmemcpy(&s->pending_buf[s->pending], buf, len);
-    s->pending += len;
-}
-/* --- trees.c */
-
-/* +++ inflate.c */
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* #include "zutil.h" */
-
-/* +++ infblock.h */
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state FAR inflate_blocks_statef;
-
-extern inflate_blocks_statef * inflate_blocks_new OF((
-    z_streamp z,
-    check_func c,               /* check function */
-    uInt w));                   /* window size */
-
-extern int inflate_blocks OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    int));                      /* initial return code */
-
-extern void inflate_blocks_reset OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    uLongf *));                  /* check value on output */
-
-extern int inflate_blocks_free OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    uLongf *));                  /* check value on output */
-
-extern void inflate_set_dictionary OF((
-    inflate_blocks_statef *s,
-    const Bytef *d,  /* dictionary */
-    uInt  n));       /* dictionary length */
-
-extern int inflate_addhistory OF((
-    inflate_blocks_statef *,
-    z_streamp));
-
-extern int inflate_packet_flush OF((
-    inflate_blocks_statef *));
-/* --- infblock.h */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_blocks_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* inflate private state */
-struct internal_state {
-
-  /* mode */
-  enum {
-      METHOD,   /* waiting for method byte */
-      FLAG,     /* waiting for flag byte */
-      DICT4,    /* four dictionary check bytes to go */
-      DICT3,    /* three dictionary check bytes to go */
-      DICT2,    /* two dictionary check bytes to go */
-      DICT1,    /* one dictionary check byte to go */
-      DICT0,    /* waiting for inflateSetDictionary */
-      BLOCKS,   /* decompressing blocks */
-      CHECK4,   /* four check bytes to go */
-      CHECK3,   /* three check bytes to go */
-      CHECK2,   /* two check bytes to go */
-      CHECK1,   /* one check byte to go */
-      DONE,     /* finished check, done */
-      BAD}      /* got an error--stay here */
-    mode;               /* current inflate mode */
-
-  /* mode dependent information */
-  union {
-    uInt method;        /* if FLAGS, method byte */
-    struct {
-      uLong was;                /* computed check value */
-      uLong need;               /* stream check value */
-    } check;            /* if CHECK, check values to compare */
-    uInt marker;        /* if BAD, inflateSync's marker bytes count */
-  } sub;        /* submode */
-
-  /* mode independent information */
-  int  nowrap;          /* flag for no wrapper */
-  uInt wbits;           /* log2(window size)  (8..15, defaults to 15) */
-  inflate_blocks_statef 
-    *blocks;            /* current inflate_blocks state */
-
-};
-
-
-int inflateReset(z)
-z_streamp z;
-{
-  uLong c;
-
-  if (z == Z_NULL || z->state == Z_NULL)
-    return Z_STREAM_ERROR;
-  z->total_in = z->total_out = 0;
-  z->msg = Z_NULL;
-  z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
-  inflate_blocks_reset(z->state->blocks, z, &c);
-  Trace((stderr, "inflate: reset\n"));
-  return Z_OK;
-}
-
-
-int inflateEnd(z)
-z_streamp z;
-{
-  uLong c;
-
-  if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->blocks != Z_NULL)
-    inflate_blocks_free(z->state->blocks, z, &c);
-  ZFREE(z, z->state);
-  z->state = Z_NULL;
-  Trace((stderr, "inflate: end\n"));
-  return Z_OK;
-}
-
-
-int inflateInit2_(z, w, version, stream_size)
-z_streamp z;
-int w;
-const char *version;
-int stream_size;
-{
-  if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
-      stream_size != sizeof(z_stream))
-      return Z_VERSION_ERROR;
-
-  /* initialize state */
-  if (z == Z_NULL)
-    return Z_STREAM_ERROR;
-  z->msg = Z_NULL;
-#ifndef NO_ZCFUNCS
-  if (z->zalloc == Z_NULL)
-  {
-    z->zalloc = zcalloc;
-    z->opaque = (voidpf)0;
-  }
-  if (z->zfree == Z_NULL) z->zfree = zcfree;
-#endif
-  if ((z->state = (struct internal_state FAR *)
-       ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
-    return Z_MEM_ERROR;
-  z->state->blocks = Z_NULL;
-
-  /* handle undocumented nowrap option (no zlib header or check) */
-  z->state->nowrap = 0;
-  if (w < 0)
-  {
-    w = - w;
-    z->state->nowrap = 1;
-  }
-
-  /* set window size */
-  if (w < 8 || w > 15)
-  {
-    inflateEnd(z);
-    return Z_STREAM_ERROR;
-  }
-  z->state->wbits = (uInt)w;
-
-  /* create inflate_blocks state */
-  if ((z->state->blocks =
-      inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w))
-      == Z_NULL)
-  {
-    inflateEnd(z);
-    return Z_MEM_ERROR;
-  }
-  Trace((stderr, "inflate: allocated\n"));
-
-  /* reset state */
-  inflateReset(z);
-  return Z_OK;
-}
-
-
-int inflateInit_(z, version, stream_size)
-z_streamp z;
-const char *version;
-int stream_size;
-{
-  return inflateInit2_(z, DEF_WBITS, version, stream_size);
-}
-
-
-#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;}
-#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
-
-int inflate(z, f)
-z_streamp z;
-int f;
-{
-  int r;
-  uInt b;
-
-  if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL || f < 0)
-    return Z_STREAM_ERROR;
-  r = Z_BUF_ERROR;
-  while (1) switch (z->state->mode)
-  {
-    case METHOD:
-      NEEDBYTE
-      if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"unknown compression method";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"invalid window size";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      z->state->mode = FLAG;
-    case FLAG:
-      NEEDBYTE
-      b = NEXTBYTE;
-      if (((z->state->sub.method << 8) + b) % 31)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"incorrect header check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Trace((stderr, "inflate: zlib header ok\n"));
-      if (!(b & PRESET_DICT))
-      {
-        z->state->mode = BLOCKS;
-	break;
-      }
-      z->state->mode = DICT4;
-    case DICT4:
-      NEEDBYTE
-      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
-      z->state->mode = DICT3;
-    case DICT3:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
-      z->state->mode = DICT2;
-    case DICT2:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
-      z->state->mode = DICT1;
-    case DICT1:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE;
-      z->adler = z->state->sub.check.need;
-      z->state->mode = DICT0;
-      return Z_NEED_DICT;
-    case DICT0:
-      z->state->mode = BAD;
-      z->msg = (char*)"need dictionary";
-      z->state->sub.marker = 0;       /* can try inflateSync */
-      return Z_STREAM_ERROR;
-    case BLOCKS:
-      r = inflate_blocks(z->state->blocks, z, r);
-      if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0)
-	  r = inflate_packet_flush(z->state->blocks);
-      if (r == Z_DATA_ERROR)
-      {
-        z->state->mode = BAD;
-        z->state->sub.marker = 0;       /* can try inflateSync */
-        break;
-      }
-      if (r != Z_STREAM_END)
-        return r;
-      r = Z_OK;
-      inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
-      if (z->state->nowrap)
-      {
-        z->state->mode = DONE;
-        break;
-      }
-      z->state->mode = CHECK4;
-    case CHECK4:
-      NEEDBYTE
-      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
-      z->state->mode = CHECK3;
-    case CHECK3:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
-      z->state->mode = CHECK2;
-    case CHECK2:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
-      z->state->mode = CHECK1;
-    case CHECK1:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE;
-
-      if (z->state->sub.check.was != z->state->sub.check.need)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"incorrect data check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Trace((stderr, "inflate: zlib check ok\n"));
-      z->state->mode = DONE;
-    case DONE:
-      return Z_STREAM_END;
-    case BAD:
-      return Z_DATA_ERROR;
-    default:
-      return Z_STREAM_ERROR;
-  }
-
- empty:
-  if (f != Z_PACKET_FLUSH)
-    return r;
-  z->state->mode = BAD;
-  z->msg = (char *)"need more for packet flush";
-  z->state->sub.marker = 0;       /* can try inflateSync */
-  return Z_DATA_ERROR;
-}
-
-
-int inflateSetDictionary(z, dictionary, dictLength)
-z_streamp z;
-const Bytef *dictionary;
-uInt  dictLength;
-{
-  uInt length = dictLength;
-
-  if (z == Z_NULL || z->state == Z_NULL || z->state->mode != DICT0)
-    return Z_STREAM_ERROR;
-
-  if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR;
-  z->adler = 1L;
-
-  if (length >= ((uInt)1<<z->state->wbits))
-  {
-    length = (1<<z->state->wbits)-1;
-    dictionary += dictLength - length;
-  }
-  inflate_set_dictionary(z->state->blocks, dictionary, length);
-  z->state->mode = BLOCKS;
-  return Z_OK;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output.  The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS).  On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-
-int inflateIncomp(z)
-z_stream *z;
-{
-    if (z->state->mode != BLOCKS)
-	return Z_DATA_ERROR;
-    return inflate_addhistory(z->state->blocks, z);
-}
-
-
-int inflateSync(z)
-z_streamp z;
-{
-  uInt n;       /* number of bytes to look at */
-  Bytef *p;     /* pointer to bytes */
-  uInt m;       /* number of marker bytes found in a row */
-  uLong r, w;   /* temporaries to save total_in and total_out */
-
-  /* set up */
-  if (z == Z_NULL || z->state == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->mode != BAD)
-  {
-    z->state->mode = BAD;
-    z->state->sub.marker = 0;
-  }
-  if ((n = z->avail_in) == 0)
-    return Z_BUF_ERROR;
-  p = z->next_in;
-  m = z->state->sub.marker;
-
-  /* search */
-  while (n && m < 4)
-  {
-    if (*p == (Byte)(m < 2 ? 0 : 0xff))
-      m++;
-    else if (*p)
-      m = 0;
-    else
-      m = 4 - m;
-    p++, n--;
-  }
-
-  /* restore */
-  z->total_in += p - z->next_in;
-  z->next_in = p;
-  z->avail_in = n;
-  z->state->sub.marker = m;
-
-  /* return no joy or set up to restart on a new block */
-  if (m != 4)
-    return Z_DATA_ERROR;
-  r = z->total_in;  w = z->total_out;
-  inflateReset(z);
-  z->total_in = r;  z->total_out = w;
-  z->state->mode = BLOCKS;
-  return Z_OK;
-}
-
-#undef NEEDBYTE
-#undef NEXTBYTE
-/* --- inflate.c */
-
-/* +++ infblock.c */
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* #include "zutil.h" */
-/* #include "infblock.h" */
-
-/* +++ inftrees.h */
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* Huffman code lookup table entry--this entry is four bytes for machines
-   that have 16-bit pointers (e.g. PC's in the small or medium model). */
-
-typedef struct inflate_huft_s FAR inflate_huft;
-
-struct inflate_huft_s {
-  union {
-    struct {
-      Byte Exop;        /* number of extra bits or operation */
-      Byte Bits;        /* number of bits in this code or subcode */
-    } what;
-    Bytef *pad;         /* pad structure to a power of 2 (4 bytes for */
-  } word;               /*  16-bit, 8 bytes for 32-bit machines) */
-  union {
-    uInt Base;          /* literal, length base, or distance base */
-    inflate_huft *Next; /* pointer to next level of table */
-  } more;
-};
-
-#ifdef DEBUG_ZLIB
-  extern uInt inflate_hufts;
-#endif
-
-extern int inflate_trees_bits OF((
-    uIntf *,                    /* 19 code lengths */
-    uIntf *,                    /* bits tree desired/actual depth */
-    inflate_huft * FAR *,       /* bits tree result */
-    z_streamp ));               /* for zalloc, zfree functions */
-
-extern int inflate_trees_dynamic OF((
-    uInt,                       /* number of literal/length codes */
-    uInt,                       /* number of distance codes */
-    uIntf *,                    /* that many (total) code lengths */
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *,       /* distance tree result */
-    z_streamp ));               /* for zalloc, zfree functions */
-
-extern int inflate_trees_fixed OF((
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *));     /* distance tree result */
-
-extern int inflate_trees_free OF((
-    inflate_huft *,             /* tables to free */
-    z_streamp ));               /* for zfree function */
-
-/* --- inftrees.h */
-
-/* +++ infcodes.h */
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state FAR inflate_codes_statef;
-
-extern inflate_codes_statef *inflate_codes_new OF((
-    uInt, uInt,
-    inflate_huft *, inflate_huft *,
-    z_streamp ));
-
-extern int inflate_codes OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    int));
-
-extern void inflate_codes_free OF((
-    inflate_codes_statef *,
-    z_streamp ));
-
-/* --- infcodes.h */
-
-/* +++ infutil.h */
-/* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _INFUTIL_H
-#define _INFUTIL_H
-
-typedef enum {
-      TYPE,     /* get type bits (3, including end bit) */
-      LENS,     /* get lengths for stored */
-      STORED,   /* processing stored block */
-      TABLE,    /* get table lengths */
-      BTREE,    /* get bit lengths tree for a dynamic block */
-      DTREE,    /* get length, distance trees for a dynamic block */
-      CODES,    /* processing fixed or dynamic block */
-      DRY,      /* output remaining window bytes */
-      DONEB,    /* finished last block, done */
-      BADB}     /* got a data error--stuck here */
-inflate_block_mode;
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
-  /* mode */
-  inflate_block_mode  mode;     /* current inflate_block mode */
-
-  /* mode dependent information */
-  union {
-    uInt left;          /* if STORED, bytes left to copy */
-    struct {
-      uInt table;               /* table lengths (14 bits) */
-      uInt index;               /* index into blens (or border) */
-      uIntf *blens;             /* bit lengths of codes */
-      uInt bb;                  /* bit length tree depth */
-      inflate_huft *tb;         /* bit length decoding tree */
-    } trees;            /* if DTREE, decoding info for trees */
-    struct {
-      inflate_huft *tl;
-      inflate_huft *td;         /* trees to free */
-      inflate_codes_statef 
-         *codes;
-    } decode;           /* if CODES, current state */
-  } sub;                /* submode */
-  uInt last;            /* true if this block is the last block */
-
-  /* mode independent information */
-  uInt bitk;            /* bits in bit buffer */
-  uLong bitb;           /* bit buffer */
-  Bytef *window;        /* sliding window */
-  Bytef *end;           /* one byte after sliding window */
-  Bytef *read;          /* window read pointer */
-  Bytef *write;         /* window write pointer */
-  check_func checkfn;   /* check function */
-  uLong check;          /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/*   update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return inflate_flush(s,z,r);}
-/*   get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/*   output bytes */
-#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=(uInt)WAVAIL;}
-#define WWRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WWRAP if(m==0){FLUSH WWRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/*   load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/* masks for lower bits (size given to avoid silly warnings with Visual C++) */
-extern uInt inflate_mask[17];
-
-/* copy as much as possible from the sliding window to the output area */
-extern int inflate_flush OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    int));
-
-#ifndef NO_DUMMY_DECL
-struct internal_state      {int dummy;}; /* for buggy compilers */
-#endif
-
-#endif
-/* --- infutil.h */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* Table for deflate from PKZIP's appnote.txt. */
-local const uInt border[] = { /* Order of the bit length code lengths */
-        16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
-   Notes beyond the 1.93a appnote.txt:
-
-   1. Distance pointers never point before the beginning of the output
-      stream.
-   2. Distance pointers can point back across blocks, up to 32k away.
-   3. There is an implied maximum of 7 bits for the bit length table and
-      15 bits for the actual data.
-   4. If only one code exists, then it is encoded using one bit.  (Zero
-      would be more efficient, but perhaps a little confusing.)  If two
-      codes exist, they are coded using one bit each (0 and 1).
-   5. There is no way of sending zero distance codes--a dummy must be
-      sent if there are none.  (History: a pre 2.0 version of PKZIP would
-      store blocks with no distance codes, but this was discovered to be
-      too harsh a criterion.)  Valid only for 1.93a.  2.04c does allow
-      zero distance codes, which is sent as one code of zero bits in
-      length.
-   6. There are up to 286 literal/length codes.  Code 256 represents the
-      end-of-block.  Note however that the static length tree defines
-      288 codes just to fill out the Huffman codes.  Codes 286 and 287
-      cannot be used though, since there is no length base or extra bits
-      defined for them.  Similarily, there are up to 30 distance codes.
-      However, static trees define 32 codes (all 5 bits) to fill out the
-      Huffman codes, but the last two had better not show up in the data.
-   7. Unzip can check dynamic Huffman blocks for complete code sets.
-      The exception is that a single code would not be complete (see #4).
-   8. The five bits following the block type is really the number of
-      literal codes sent minus 257.
-   9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
-      (1+6+6).  Therefore, to output three times the length, you output
-      three codes (1+1+1), whereas to output four times the same length,
-      you only need two codes (1+3).  Hmm.
-  10. In the tree reconstruction algorithm, Code = Code + Increment
-      only if BitLength(i) is not zero.  (Pretty obvious.)
-  11. Correction: 4 Bits: # of Bit Length codes - 4     (4 - 19)
-  12. Note: length code 284 can represent 227-258, but length code 285
-      really is 258.  The last length deserves its own, short code
-      since it gets used a lot in very redundant files.  The length
-      258 is special since 258 - 3 (the min match length) is 255.
-  13. The literal/length and distance code bit lengths are read as a
-      single stream of lengths.  It is possible (and advantageous) for
-      a repeat code (16, 17, or 18) to go across the boundary between
-      the two sets of lengths.
- */
-
-
-void inflate_blocks_reset(s, z, c)
-inflate_blocks_statef *s;
-z_streamp z;
-uLongf *c;
-{
-  if (s->checkfn != Z_NULL)
-    *c = s->check;
-  if (s->mode == BTREE || s->mode == DTREE)
-    ZFREE(z, s->sub.trees.blens);
-  if (s->mode == CODES)
-  {
-    inflate_codes_free(s->sub.decode.codes, z);
-    inflate_trees_free(s->sub.decode.td, z);
-    inflate_trees_free(s->sub.decode.tl, z);
-  }
-  s->mode = TYPE;
-  s->bitk = 0;
-  s->bitb = 0;
-  s->read = s->write = s->window;
-  if (s->checkfn != Z_NULL)
-    z->adler = s->check = (*s->checkfn)(0L, Z_NULL, 0);
-  Trace((stderr, "inflate:   blocks reset\n"));
-}
-
-
-inflate_blocks_statef *inflate_blocks_new(z, c, w)
-z_streamp z;
-check_func c;
-uInt w;
-{
-  inflate_blocks_statef *s;
-
-  if ((s = (inflate_blocks_statef *)ZALLOC
-       (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
-    return s;
-  if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
-  {
-    ZFREE(z, s);
-    return Z_NULL;
-  }
-  s->end = s->window + w;
-  s->checkfn = c;
-  s->mode = TYPE;
-  Trace((stderr, "inflate:   blocks allocated\n"));
-  inflate_blocks_reset(s, z, &s->check);
-  return s;
-}
-
-
-#ifdef DEBUG_ZLIB
-  extern uInt inflate_hufts;
-#endif
-int inflate_blocks(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
-  uInt t;               /* temporary storage */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input based on current state */
-  while (1) switch (s->mode)
-  {
-    case TYPE:
-      NEEDBITS(3)
-      t = (uInt)b & 7;
-      s->last = t & 1;
-      switch (t >> 1)
-      {
-        case 0:                         /* stored */
-          Trace((stderr, "inflate:     stored block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          t = k & 7;                    /* go to byte boundary */
-          DUMPBITS(t)
-          s->mode = LENS;               /* get length of stored block */
-          break;
-        case 1:                         /* fixed */
-          Trace((stderr, "inflate:     fixed codes block%s\n",
-                 s->last ? " (last)" : ""));
-          {
-            uInt bl, bd;
-            inflate_huft *tl, *td;
-
-            inflate_trees_fixed(&bl, &bd, &tl, &td);
-            s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
-            if (s->sub.decode.codes == Z_NULL)
-            {
-              r = Z_MEM_ERROR;
-              LEAVE
-            }
-            s->sub.decode.tl = Z_NULL;  /* don't try to free these */
-            s->sub.decode.td = Z_NULL;
-          }
-          DUMPBITS(3)
-          s->mode = CODES;
-          break;
-        case 2:                         /* dynamic */
-          Trace((stderr, "inflate:     dynamic codes block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          s->mode = TABLE;
-          break;
-        case 3:                         /* illegal */
-          DUMPBITS(3)
-          s->mode = BADB;
-          z->msg = (char*)"invalid block type";
-          r = Z_DATA_ERROR;
-          LEAVE
-      }
-      break;
-    case LENS:
-      NEEDBITS(32)
-      if ((((~b) >> 16) & 0xffff) != (b & 0xffff))
-      {
-        s->mode = BADB;
-        z->msg = (char*)"invalid stored block lengths";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-      s->sub.left = (uInt)b & 0xffff;
-      b = k = 0;                      /* dump bits */
-      Tracev((stderr, "inflate:       stored length %u\n", s->sub.left));
-      s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE);
-      break;
-    case STORED:
-      if (n == 0)
-        LEAVE
-      NEEDOUT
-      t = s->sub.left;
-      if (t > n) t = n;
-      if (t > m) t = m;
-      zmemcpy(q, p, t);
-      p += t;  n -= t;
-      q += t;  m -= t;
-      if ((s->sub.left -= t) != 0)
-        break;
-      Tracev((stderr, "inflate:       stored end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      s->mode = s->last ? DRY : TYPE;
-      break;
-    case TABLE:
-      NEEDBITS(14)
-      s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
-      if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
-      {
-        s->mode = BADB;
-        z->msg = (char*)"too many length or distance symbols";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-#endif
-      t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
-      if (t < 19)
-        t = 19;
-      if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
-      {
-        r = Z_MEM_ERROR;
-        LEAVE
-      }
-      DUMPBITS(14)
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       table sizes ok\n"));
-      s->mode = BTREE;
-    case BTREE:
-      while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
-      {
-        NEEDBITS(3)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
-        DUMPBITS(3)
-      }
-      while (s->sub.trees.index < 19)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
-      s->sub.trees.bb = 7;
-      t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
-                             &s->sub.trees.tb, z);
-      if (t != Z_OK)
-      {
-        ZFREE(z, s->sub.trees.blens);
-        r = t;
-        if (r == Z_DATA_ERROR)
-          s->mode = BADB;
-        LEAVE
-      }
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       bits tree ok\n"));
-      s->mode = DTREE;
-    case DTREE:
-      while (t = s->sub.trees.table,
-             s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
-      {
-        inflate_huft *h;
-        uInt i, j, c;
-
-        t = s->sub.trees.bb;
-        NEEDBITS(t)
-        h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
-        t = h->word.what.Bits;
-        c = h->more.Base;
-        if (c < 16)
-        {
-          DUMPBITS(t)
-          s->sub.trees.blens[s->sub.trees.index++] = c;
-        }
-        else /* c == 16..18 */
-        {
-          i = c == 18 ? 7 : c - 14;
-          j = c == 18 ? 11 : 3;
-          NEEDBITS(t + i)
-          DUMPBITS(t)
-          j += (uInt)b & inflate_mask[i];
-          DUMPBITS(i)
-          i = s->sub.trees.index;
-          t = s->sub.trees.table;
-          if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
-              (c == 16 && i < 1))
-          {
-            inflate_trees_free(s->sub.trees.tb, z);
-            ZFREE(z, s->sub.trees.blens);
-            s->mode = BADB;
-            z->msg = (char*)"invalid bit length repeat";
-            r = Z_DATA_ERROR;
-            LEAVE
-          }
-          c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
-          do {
-            s->sub.trees.blens[i++] = c;
-          } while (--j);
-          s->sub.trees.index = i;
-        }
-      }
-      inflate_trees_free(s->sub.trees.tb, z);
-      s->sub.trees.tb = Z_NULL;
-      {
-        uInt bl, bd;
-        inflate_huft *tl, *td;
-        inflate_codes_statef *c;
-
-        bl = 9;         /* must be <= 9 for lookahead assumptions */
-        bd = 6;         /* must be <= 9 for lookahead assumptions */
-        t = s->sub.trees.table;
-#ifdef DEBUG_ZLIB
-      inflate_hufts = 0;
-#endif
-        t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
-                                  s->sub.trees.blens, &bl, &bd, &tl, &td, z);
-        ZFREE(z, s->sub.trees.blens);
-        if (t != Z_OK)
-        {
-          if (t == (uInt)Z_DATA_ERROR)
-            s->mode = BADB;
-          r = t;
-          LEAVE
-        }
-        Tracev((stderr, "inflate:       trees ok, %d * %d bytes used\n",
-              inflate_hufts, sizeof(inflate_huft)));
-        if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
-        {
-          inflate_trees_free(td, z);
-          inflate_trees_free(tl, z);
-          r = Z_MEM_ERROR;
-          LEAVE
-        }
-        s->sub.decode.codes = c;
-        s->sub.decode.tl = tl;
-        s->sub.decode.td = td;
-      }
-      s->mode = CODES;
-    case CODES:
-      UPDATE
-      if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
-        return inflate_flush(s, z, r);
-      r = Z_OK;
-      inflate_codes_free(s->sub.decode.codes, z);
-      inflate_trees_free(s->sub.decode.td, z);
-      inflate_trees_free(s->sub.decode.tl, z);
-      LOAD
-      Tracev((stderr, "inflate:       codes end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      if (!s->last)
-      {
-        s->mode = TYPE;
-        break;
-      }
-      if (k > 7)              /* return unused byte, if any */
-      {
-        Assert(k < 16, "inflate_codes grabbed too many bytes")
-        k -= 8;
-        n++;
-        p--;                    /* can always return one */
-      }
-      s->mode = DRY;
-    case DRY:
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      s->mode = DONEB;
-    case DONEB:
-      r = Z_STREAM_END;
-      LEAVE
-    case BADB:
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-}
-
-
-int inflate_blocks_free(s, z, c)
-inflate_blocks_statef *s;
-z_streamp z;
-uLongf *c;
-{
-  inflate_blocks_reset(s, z, c);
-  ZFREE(z, s->window);
-  ZFREE(z, s);
-  Trace((stderr, "inflate:   blocks freed\n"));
-  return Z_OK;
-}
-
-
-void inflate_set_dictionary(s, d, n)
-inflate_blocks_statef *s;
-const Bytef *d;
-uInt  n;
-{
-  zmemcpy((charf *)s->window, d, n);
-  s->read = s->write = s->window + n;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output.  The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS).  On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-int inflate_addhistory(s, z)
-inflate_blocks_statef *s;
-z_stream *z;
-{
-    uLong b;              /* bit buffer */  /* NOT USED HERE */
-    uInt k;               /* bits in bit buffer */ /* NOT USED HERE */
-    uInt t;               /* temporary storage */
-    Bytef *p;             /* input data pointer */
-    uInt n;               /* bytes available there */
-    Bytef *q;             /* output window write pointer */
-    uInt m;               /* bytes to end of window or read pointer */
-
-    if (s->read != s->write)
-	return Z_STREAM_ERROR;
-    if (s->mode != TYPE)
-	return Z_DATA_ERROR;
-
-    /* we're ready to rock */
-    LOAD
-    /* while there is input ready, copy to output buffer, moving
-     * pointers as needed.
-     */
-    while (n) {
-	t = n;  /* how many to do */
-	/* is there room until end of buffer? */
-	if (t > m) t = m;
-	/* update check information */
-	if (s->checkfn != Z_NULL)
-	    s->check = (*s->checkfn)(s->check, q, t);
-	zmemcpy(q, p, t);
-	q += t;
-	p += t;
-	n -= t;
-	z->total_out += t;
-	s->read = q;    /* drag read pointer forward */
-/*      WWRAP  */ 	/* expand WWRAP macro by hand to handle s->read */
-	if (q == s->end) {
-	    s->read = q = s->window;
-	    m = WAVAIL;
-	}
-    }
-    UPDATE
-    return Z_OK;
-}
-
-
-/*
- * At the end of a Deflate-compressed PPP packet, we expect to have seen
- * a `stored' block type value but not the (zero) length bytes.
- */
-int inflate_packet_flush(s)
-    inflate_blocks_statef *s;
-{
-    if (s->mode != LENS)
-	return Z_DATA_ERROR;
-    s->mode = TYPE;
-    return Z_OK;
-}
-/* --- infblock.c */
-
-/* +++ inftrees.c */
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* #include "zutil.h" */
-/* #include "inftrees.h" */
-
-char inflate_copyright[] = " inflate 1.0.4 Copyright 1995-1996 Mark Adler ";
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-
-#ifndef NO_DUMMY_DECL
-struct internal_state  {int dummy;}; /* for buggy compilers */
-#endif
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-local int huft_build OF((
-    uIntf *,            /* code lengths in bits */
-    uInt,               /* number of codes */
-    uInt,               /* number of "simple" codes */
-    const uIntf *,      /* list of base values for non-simple codes */
-    const uIntf *,      /* list of extra bits for non-simple codes */
-    inflate_huft * FAR*,/* result: starting table */
-    uIntf *,            /* maximum lookup bits (returns actual) */
-    z_streamp ));       /* for zalloc function */
-
-local voidpf falloc OF((
-    voidpf,             /* opaque pointer (not used) */
-    uInt,               /* number of items */
-    uInt));             /* size of item */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
-        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
-        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-        /* see note #13 above about 258 */
-local const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */
-        0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
-        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */
-local const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */
-        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
-        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-        8193, 12289, 16385, 24577};
-local const uInt cpdext[30] = { /* Extra bits for distance codes */
-        0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
-        7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
-        12, 12, 13, 13};
-
-/*
-   Huffman code decoding is performed using a multi-level table lookup.
-   The fastest way to decode is to simply build a lookup table whose
-   size is determined by the longest code.  However, the time it takes
-   to build this table can also be a factor if the data being decoded
-   is not very long.  The most common codes are necessarily the
-   shortest codes, so those codes dominate the decoding time, and hence
-   the speed.  The idea is you can have a shorter table that decodes the
-   shorter, more probable codes, and then point to subsidiary tables for
-   the longer codes.  The time it costs to decode the longer codes is
-   then traded against the time it takes to make longer tables.
-
-   This results of this trade are in the variables lbits and dbits
-   below.  lbits is the number of bits the first level table for literal/
-   length codes can decode in one step, and dbits is the same thing for
-   the distance codes.  Subsequent tables are also less than or equal to
-   those sizes.  These values may be adjusted either when all of the
-   codes are shorter than that, in which case the longest code length in
-   bits is used, or when the shortest code is *longer* than the requested
-   table size, in which case the length of the shortest code in bits is
-   used.
-
-   There are two different values for the two tables, since they code a
-   different number of possibilities each.  The literal/length table
-   codes 286 possible values, or in a flat code, a little over eight
-   bits.  The distance table codes 30 possible values, or a little less
-   than five bits, flat.  The optimum values for speed end up being
-   about one bit more than those, so lbits is 8+1 and dbits is 5+1.
-   The optimum values may differ though from machine to machine, and
-   possibly even between compilers.  Your mileage may vary.
- */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15         /* maximum bit length of any code */
-#define N_MAX 288       /* maximum number of codes in any set */
-
-#ifdef DEBUG_ZLIB
-  uInt inflate_hufts;
-#endif
-
-local int huft_build(b, n, s, d, e, t, m, zs)
-uIntf *b;               /* code lengths in bits (all assumed <= BMAX) */
-uInt n;                 /* number of codes (assumed <= N_MAX) */
-uInt s;                 /* number of simple-valued codes (0..s-1) */
-const uIntf *d;         /* list of base values for non-simple codes */
-const uIntf *e;         /* list of extra bits for non-simple codes */
-inflate_huft * FAR *t;  /* result: starting table */
-uIntf *m;               /* maximum lookup bits, returns actual */
-z_streamp zs;           /* for zalloc function */
-/* Given a list of code lengths and a maximum table size, make a set of
-   tables to decode that set of codes.  Return Z_OK on success, Z_BUF_ERROR
-   if the given code set is incomplete (the tables are still built in this
-   case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of
-   lengths), or Z_MEM_ERROR if not enough memory. */
-{
-
-  uInt a;                       /* counter for codes of length k */
-  uInt c[BMAX+1];               /* bit length count table */
-  uInt f;                       /* i repeats in table every f entries */
-  int g;                        /* maximum code length */
-  int h;                        /* table level */
-  register uInt i;              /* counter, current code */
-  register uInt j;              /* counter */
-  register int k;               /* number of bits in current code */
-  int l;                        /* bits per table (returned in m) */
-  register uIntf *p;            /* pointer into c[], b[], or v[] */
-  inflate_huft *q;              /* points to current table */
-  struct inflate_huft_s r;      /* table entry for structure assignment */
-  inflate_huft *u[BMAX];        /* table stack */
-  uInt v[N_MAX];                /* values in order of bit length */
-  register int w;               /* bits before this table == (l * h) */
-  uInt x[BMAX+1];               /* bit offsets, then code stack */
-  uIntf *xp;                    /* pointer into x */
-  int y;                        /* number of dummy codes added */
-  uInt z;                       /* number of entries in current table */
-
-
-  /* Generate counts for each bit length */
-  p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
-  C4                            /* clear c[]--assume BMAX+1 is 16 */
-  p = b;  i = n;
-  do {
-    c[*p++]++;                  /* assume all entries <= BMAX */
-  } while (--i);
-  if (c[0] == n)                /* null input--all zero length codes */
-  {
-    *t = (inflate_huft *)Z_NULL;
-    *m = 0;
-    return Z_OK;
-  }
-
-
-  /* Find minimum and maximum length, bound *m by those */
-  l = *m;
-  for (j = 1; j <= BMAX; j++)
-    if (c[j])
-      break;
-  k = j;                        /* minimum code length */
-  if ((uInt)l < j)
-    l = j;
-  for (i = BMAX; i; i--)
-    if (c[i])
-      break;
-  g = i;                        /* maximum code length */
-  if ((uInt)l > i)
-    l = i;
-  *m = l;
-
-
-  /* Adjust last length count to fill out codes, if needed */
-  for (y = 1 << j; j < i; j++, y <<= 1)
-    if ((y -= c[j]) < 0)
-      return Z_DATA_ERROR;
-  if ((y -= c[i]) < 0)
-    return Z_DATA_ERROR;
-  c[i] += y;
-
-
-  /* Generate starting offsets into the value table for each length */
-  x[1] = j = 0;
-  p = c + 1;  xp = x + 2;
-  while (--i) {                 /* note that i == g from above */
-    *xp++ = (j += *p++);
-  }
-
-
-  /* Make a table of values in order of bit lengths */
-  p = b;  i = 0;
-  do {
-    if ((j = *p++) != 0)
-      v[x[j]++] = i;
-  } while (++i < n);
-  n = x[g];                   /* set n to length of v */
-
-
-  /* Generate the Huffman codes and for each, make the table entries */
-  x[0] = i = 0;                 /* first Huffman code is zero */
-  p = v;                        /* grab values in bit order */
-  h = -1;                       /* no tables yet--level -1 */
-  w = -l;                       /* bits decoded == (l * h) */
-  u[0] = (inflate_huft *)Z_NULL;        /* just to keep compilers happy */
-  q = (inflate_huft *)Z_NULL;   /* ditto */
-  z = 0;                        /* ditto */
-
-  /* go through the bit lengths (k already is bits in shortest code) */
-  for (; k <= g; k++)
-  {
-    a = c[k];
-    while (a--)
-    {
-      /* here i is the Huffman code of length k bits for value *p */
-      /* make tables up to required level */
-      while (k > w + l)
-      {
-        h++;
-        w += l;                 /* previous table always l bits */
-
-        /* compute minimum size table less than or equal to l bits */
-        z = g - w;
-        z = z > (uInt)l ? l : z;        /* table size upper limit */
-        if ((f = 1 << (j = k - w)) > a + 1)     /* try a k-w bit table */
-        {                       /* too few codes for k-w bit table */
-          f -= a + 1;           /* deduct codes from patterns left */
-          xp = c + k;
-          if (j < z)
-            while (++j < z)     /* try smaller tables up to z bits */
-            {
-              if ((f <<= 1) <= *++xp)
-                break;          /* enough codes to use up j bits */
-              f -= *xp;         /* else deduct codes from patterns */
-            }
-        }
-        z = 1 << j;             /* table entries for j-bit table */
-
-        /* allocate and link in new table */
-        if ((q = (inflate_huft *)ZALLOC
-             (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
-        {
-          if (h)
-            inflate_trees_free(u[0], zs);
-          return Z_MEM_ERROR;   /* not enough memory */
-        }
-#ifdef DEBUG_ZLIB
-        inflate_hufts += z + 1;
-#endif
-        *t = q + 1;             /* link to list for huft_free() */
-        *(t = &(q->next)) = Z_NULL;
-        u[h] = ++q;             /* table starts after link */
-
-        /* connect to last table, if there is one */
-        if (h)
-        {
-          x[h] = i;             /* save pattern for backing up */
-          r.bits = (Byte)l;     /* bits to dump before this table */
-          r.exop = (Byte)j;     /* bits in this table */
-          r.next = q;           /* pointer to this table */
-          j = i >> (w - l);     /* (get around Turbo C bug) */
-          u[h-1][j] = r;        /* connect to last table */
-        }
-      }
-
-      /* set up table entry in r */
-      r.bits = (Byte)(k - w);
-      if (p >= v + n)
-        r.exop = 128 + 64;      /* out of values--invalid code */
-      else if (*p < s)
-      {
-        r.exop = (Byte)(*p < 256 ? 0 : 32 + 64);     /* 256 is end-of-block */
-        r.base = *p++;          /* simple code is just the value */
-      }
-      else
-      {
-        r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */
-        r.base = d[*p++ - s];
-      }
-
-      /* fill code-like entries with r */
-      f = 1 << (k - w);
-      for (j = i >> w; j < z; j += f)
-        q[j] = r;
-
-      /* backwards increment the k-bit code i */
-      for (j = 1 << (k - 1); i & j; j >>= 1)
-        i ^= j;
-      i ^= j;
-
-      /* backup over finished tables */
-      while ((i & ((1 << w) - 1)) != x[h])
-      {
-        h--;                    /* don't need to update q */
-        w -= l;
-      }
-    }
-  }
-
-
-  /* Return Z_BUF_ERROR if we were given an incomplete table */
-  return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
-
-
-int inflate_trees_bits(c, bb, tb, z)
-uIntf *c;               /* 19 code lengths */
-uIntf *bb;              /* bits tree desired/actual depth */
-inflate_huft * FAR *tb; /* bits tree result */
-z_streamp z;            /* for zfree function */
-{
-  int r;
-
-  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
-  if (r == Z_DATA_ERROR)
-    z->msg = (char*)"oversubscribed dynamic bit lengths tree";
-  else if (r == Z_BUF_ERROR || *bb == 0)
-  {
-    inflate_trees_free(*tb, z);
-    z->msg = (char*)"incomplete dynamic bit lengths tree";
-    r = Z_DATA_ERROR;
-  }
-  return r;
-}
-
-
-int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z)
-uInt nl;                /* number of literal/length codes */
-uInt nd;                /* number of distance codes */
-uIntf *c;               /* that many (total) code lengths */
-uIntf *bl;              /* literal desired/actual bit depth */
-uIntf *bd;              /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-z_streamp z;            /* for zfree function */
-{
-  int r;
-
-  /* build literal/length tree */
-  r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z);
-  if (r != Z_OK || *bl == 0)
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = (char*)"oversubscribed literal/length tree";
-    else if (r != Z_MEM_ERROR)
-    {
-      inflate_trees_free(*tl, z);
-      z->msg = (char*)"incomplete literal/length tree";
-      r = Z_DATA_ERROR;
-    }
-    return r;
-  }
-
-  /* build distance tree */
-  r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z);
-  if (r != Z_OK || (*bd == 0 && nl > 257))
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = (char*)"oversubscribed distance tree";
-    else if (r == Z_BUF_ERROR) {
-#ifdef PKZIP_BUG_WORKAROUND
-      r = Z_OK;
-    }
-#else
-      inflate_trees_free(*td, z);
-      z->msg = (char*)"incomplete distance tree";
-      r = Z_DATA_ERROR;
-    }
-    else if (r != Z_MEM_ERROR)
-    {
-      z->msg = (char*)"empty distance tree with lengths";
-      r = Z_DATA_ERROR;
-    }
-    inflate_trees_free(*tl, z);
-    return r;
-#endif
-  }
-
-  /* done */
-  return Z_OK;
-}
-
-
-/* build fixed tables only once--keep them here */
-local int fixed_built = 0;
-#define FIXEDH 530      /* number of hufts used by fixed tables */
-local inflate_huft fixed_mem[FIXEDH];
-local uInt fixed_bl;
-local uInt fixed_bd;
-local inflate_huft *fixed_tl;
-local inflate_huft *fixed_td;
-
-
-local voidpf falloc(q, n, s)
-voidpf q;       /* opaque pointer */
-uInt n;         /* number of items */
-uInt s;         /* size of item */
-{
-  Assert(s == sizeof(inflate_huft) && n <= *(intf *)q,
-         "inflate_trees falloc overflow");
-  *(intf *)q -= n+s-s; /* s-s to avoid warning */
-  return (voidpf)(fixed_mem + *(intf *)q);
-}
-
-
-int inflate_trees_fixed(bl, bd, tl, td)
-uIntf *bl;               /* literal desired/actual bit depth */
-uIntf *bd;               /* distance desired/actual bit depth */
-inflate_huft * FAR *tl;  /* literal/length tree result */
-inflate_huft * FAR *td;  /* distance tree result */
-{
-  /* build fixed tables if not already (multiple overlapped executions ok) */
-  if (!fixed_built)
-  {
-    int k;              /* temporary variable */
-    unsigned c[288];    /* length list for huft_build */
-    z_stream z;         /* for falloc function */
-    int f = FIXEDH;     /* number of hufts left in fixed_mem */
-
-    /* set up fake z_stream for memory routines */
-    z.zalloc = falloc;
-    z.zfree = Z_NULL;
-    z.opaque = (voidpf)&f;
-
-    /* literal table */
-    for (k = 0; k < 144; k++)
-      c[k] = 8;
-    for (; k < 256; k++)
-      c[k] = 9;
-    for (; k < 280; k++)
-      c[k] = 7;
-    for (; k < 288; k++)
-      c[k] = 8;
-    fixed_bl = 7;
-    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
-
-    /* distance table */
-    for (k = 0; k < 30; k++)
-      c[k] = 5;
-    fixed_bd = 5;
-    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
-
-    /* done */
-    Assert(f == 0, "invalid build of fixed tables");
-    fixed_built = 1;
-  }
-  *bl = fixed_bl;
-  *bd = fixed_bd;
-  *tl = fixed_tl;
-  *td = fixed_td;
-  return Z_OK;
-}
-
-
-int inflate_trees_free(t, z)
-inflate_huft *t;        /* table to free */
-z_streamp z;            /* for zfree function */
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
-   list of the tables it made, with the links in a dummy first entry of
-   each table. */
-{
-  register inflate_huft *p, *q, *r;
-
-  /* Reverse linked list */
-  p = Z_NULL;
-  q = t;
-  while (q != Z_NULL)
-  {
-    r = (q - 1)->next;
-    (q - 1)->next = p;
-    p = q;
-    q = r;
-  }
-  /* Go through linked list, freeing from the malloced (t[-1]) address. */
-  while (p != Z_NULL)
-  {
-    q = (--p)->next;
-    ZFREE(z,p);
-    p = q;
-  } 
-  return Z_OK;
-}
-/* --- inftrees.c */
-
-/* +++ infcodes.c */
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* #include "zutil.h" */
-/* #include "inftrees.h" */
-/* #include "infblock.h" */
-/* #include "infcodes.h" */
-/* #include "infutil.h" */
-
-/* +++ inffast.h */
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-extern int inflate_fast OF((
-    uInt,
-    uInt,
-    inflate_huft *,
-    inflate_huft *,
-    inflate_blocks_statef *,
-    z_streamp ));
-/* --- inffast.h */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* inflate codes private state */
-struct inflate_codes_state {
-
-  /* mode */
-  enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-      START,    /* x: set up for LEN */
-      LEN,      /* i: get length/literal/eob next */
-      LENEXT,   /* i: getting length extra (have base) */
-      DIST,     /* i: get distance next */
-      DISTEXT,  /* i: getting distance extra */
-      COPY,     /* o: copying bytes in window, waiting for space */
-      LIT,      /* o: got literal, waiting for output space */
-      WASH,     /* o: got eob, possibly still output waiting */
-      END,      /* x: got eob and all data flushed */
-      BADCODE}  /* x: got error */
-    mode;               /* current inflate_codes mode */
-
-  /* mode dependent information */
-  uInt len;
-  union {
-    struct {
-      inflate_huft *tree;       /* pointer into tree */
-      uInt need;                /* bits needed */
-    } code;             /* if LEN or DIST, where in tree */
-    uInt lit;           /* if LIT, literal */
-    struct {
-      uInt get;                 /* bits to get for extra */
-      uInt dist;                /* distance back to copy from */
-    } copy;             /* if EXT or COPY, where and how much */
-  } sub;                /* submode */
-
-  /* mode independent information */
-  Byte lbits;           /* ltree bits decoded per branch */
-  Byte dbits;           /* dtree bits decoder per branch */
-  inflate_huft *ltree;          /* literal/length/eob tree */
-  inflate_huft *dtree;          /* distance tree */
-
-};
-
-
-inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
-uInt bl, bd;
-inflate_huft *tl;
-inflate_huft *td; /* need separate declaration for Borland C++ */
-z_streamp z;
-{
-  inflate_codes_statef *c;
-
-  if ((c = (inflate_codes_statef *)
-       ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
-  {
-    c->mode = START;
-    c->lbits = (Byte)bl;
-    c->dbits = (Byte)bd;
-    c->ltree = tl;
-    c->dtree = td;
-    Tracev((stderr, "inflate:       codes new\n"));
-  }
-  return c;
-}
-
-
-int inflate_codes(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
-  uInt j;               /* temporary storage */
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  Bytef *f;             /* pointer to copy strings from */
-  inflate_codes_statef *c = s->sub.decode.codes;  /* codes state */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input and output based on current state */
-  while (1) switch (c->mode)
-  {             /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-    case START:         /* x: set up for LEN */
-#ifndef SLOW
-      if (m >= 258 && n >= 10)
-      {
-        UPDATE
-        r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
-        LOAD
-        if (r != Z_OK)
-        {
-          c->mode = r == Z_STREAM_END ? WASH : BADCODE;
-          break;
-        }
-      }
-#endif /* !SLOW */
-      c->sub.code.need = c->lbits;
-      c->sub.code.tree = c->ltree;
-      c->mode = LEN;
-    case LEN:           /* i: get length/literal/eob next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e == 0)               /* literal */
-      {
-        c->sub.lit = t->base;
-        Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                 "inflate:         literal '%c'\n" :
-                 "inflate:         literal 0x%02x\n", t->base));
-        c->mode = LIT;
-        break;
-      }
-      if (e & 16)               /* length */
-      {
-        c->sub.copy.get = e & 15;
-        c->len = t->base;
-        c->mode = LENEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t->next;
-        break;
-      }
-      if (e & 32)               /* end of block */
-      {
-        Tracevv((stderr, "inflate:         end of block\n"));
-        c->mode = WASH;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = (char*)"invalid literal/length code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case LENEXT:        /* i: getting length extra (have base) */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->len += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      c->sub.code.need = c->dbits;
-      c->sub.code.tree = c->dtree;
-      Tracevv((stderr, "inflate:         length %u\n", c->len));
-      c->mode = DIST;
-    case DIST:          /* i: get distance next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e & 16)               /* distance */
-      {
-        c->sub.copy.get = e & 15;
-        c->sub.copy.dist = t->base;
-        c->mode = DISTEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t->next;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = (char*)"invalid distance code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case DISTEXT:       /* i: getting distance extra */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->sub.copy.dist += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      Tracevv((stderr, "inflate:         distance %u\n", c->sub.copy.dist));
-      c->mode = COPY;
-    case COPY:          /* o: copying bytes in window, waiting for space */
-#ifndef __TURBOC__ /* Turbo C bug for following expression */
-      f = (uInt)(q - s->window) < c->sub.copy.dist ?
-          s->end - (c->sub.copy.dist - (q - s->window)) :
-          q - c->sub.copy.dist;
-#else
-      f = q - c->sub.copy.dist;
-      if ((uInt)(q - s->window) < c->sub.copy.dist)
-        f = s->end - (c->sub.copy.dist - (uInt)(q - s->window));
-#endif
-      while (c->len)
-      {
-        NEEDOUT
-        OUTBYTE(*f++)
-        if (f == s->end)
-          f = s->window;
-        c->len--;
-      }
-      c->mode = START;
-      break;
-    case LIT:           /* o: got literal, waiting for output space */
-      NEEDOUT
-      OUTBYTE(c->sub.lit)
-      c->mode = START;
-      break;
-    case WASH:          /* o: got eob, possibly more output */
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      c->mode = END;
-    case END:
-      r = Z_STREAM_END;
-      LEAVE
-    case BADCODE:       /* x: got error */
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-}
-
-
-void inflate_codes_free(c, z)
-inflate_codes_statef *c;
-z_streamp z;
-{
-  ZFREE(z, c);
-  Tracev((stderr, "inflate:       codes free\n"));
-}
-/* --- infcodes.c */
-
-/* +++ infutil.c */
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* #include "zutil.h" */
-/* #include "infblock.h" */
-/* #include "inftrees.h" */
-/* #include "infcodes.h" */
-/* #include "infutil.h" */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* And'ing with mask[n] masks the lower n bits */
-uInt inflate_mask[17] = {
-    0x0000,
-    0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
-    0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-
-/* copy as much as possible from the sliding window to the output area */
-int inflate_flush(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
-  uInt n;
-  Bytef *p;
-  Bytef *q;
-
-  /* local copies of source and destination pointers */
-  p = z->next_out;
-  q = s->read;
-
-  /* compute number of bytes to copy as far as end of window */
-  n = (uInt)((q <= s->write ? s->write : s->end) - q);
-  if (n > z->avail_out) n = z->avail_out;
-  if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-  /* update counters */
-  z->avail_out -= n;
-  z->total_out += n;
-
-  /* update check information */
-  if (s->checkfn != Z_NULL)
-    z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
-  /* copy as far as end of window */
-  if (p != Z_NULL) {
-    zmemcpy(p, q, n);
-    p += n;
-  }
-  q += n;
-
-  /* see if more to copy at beginning of window */
-  if (q == s->end)
-  {
-    /* wrap pointers */
-    q = s->window;
-    if (s->write == s->end)
-      s->write = s->window;
-
-    /* compute bytes to copy */
-    n = (uInt)(s->write - q);
-    if (n > z->avail_out) n = z->avail_out;
-    if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-    /* update counters */
-    z->avail_out -= n;
-    z->total_out += n;
-
-    /* update check information */
-    if (s->checkfn != Z_NULL)
-      z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
-    /* copy */
-    if (p != Z_NULL) {
-      zmemcpy(p, q, n);
-      p += n;
-    }
-    q += n;
-  }
-
-  /* update pointers */
-  z->next_out = p;
-  s->read = q;
-
-  /* done */
-  return r;
-}
-/* --- infutil.c */
-
-/* +++ inffast.c */
-/* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* #include "zutil.h" */
-/* #include "inftrees.h" */
-/* #include "infblock.h" */
-/* #include "infcodes.h" */
-/* #include "infutil.h" */
-/* #include "inffast.h" */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* macros for bit input with no checking and for returning unused bytes */
-#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
-
-/* Called with number of bytes left to write in window at least 258
-   (the maximum string length) and number of input bytes available
-   at least ten.  The ten bytes are six bytes for the longest length/
-   distance pair plus four bytes for overloading the bit buffer. */
-
-int inflate_fast(bl, bd, tl, td, s, z)
-uInt bl, bd;
-inflate_huft *tl;
-inflate_huft *td; /* need separate declaration for Borland C++ */
-inflate_blocks_statef *s;
-z_streamp z;
-{
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  uInt ml;              /* mask for literal/length tree */
-  uInt md;              /* mask for distance tree */
-  uInt c;               /* bytes to copy */
-  uInt d;               /* distance back to copy from */
-  Bytef *r;             /* copy source pointer */
-
-  /* load input, output, bit values */
-  LOAD
-
-  /* initialize masks */
-  ml = inflate_mask[bl];
-  md = inflate_mask[bd];
-
-  /* do until not enough input or output space for fast loop */
-  do {                          /* assume called with m >= 258 && n >= 10 */
-    /* get literal/length code */
-    GRABBITS(20)                /* max bits for literal/length code */
-    if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
-    {
-      DUMPBITS(t->bits)
-      Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                "inflate:         * literal '%c'\n" :
-                "inflate:         * literal 0x%02x\n", t->base));
-      *q++ = (Byte)t->base;
-      m--;
-      continue;
-    }
-    do {
-      DUMPBITS(t->bits)
-      if (e & 16)
-      {
-        /* get extra bits for length */
-        e &= 15;
-        c = t->base + ((uInt)b & inflate_mask[e]);
-        DUMPBITS(e)
-        Tracevv((stderr, "inflate:         * length %u\n", c));
-
-        /* decode distance base of block to copy */
-        GRABBITS(15);           /* max bits for distance code */
-        e = (t = td + ((uInt)b & md))->exop;
-        do {
-          DUMPBITS(t->bits)
-          if (e & 16)
-          {
-            /* get extra bits to add to distance base */
-            e &= 15;
-            GRABBITS(e)         /* get extra bits (up to 13) */
-            d = t->base + ((uInt)b & inflate_mask[e]);
-            DUMPBITS(e)
-            Tracevv((stderr, "inflate:         * distance %u\n", d));
-
-            /* do the copy */
-            m -= c;
-            if ((uInt)(q - s->window) >= d)     /* offset before dest */
-            {                                   /*  just copy */
-              r = q - d;
-              *q++ = *r++;  c--;        /* minimum count is three, */
-              *q++ = *r++;  c--;        /*  so unroll loop a little */
-            }
-            else                        /* else offset after destination */
-            {
-              e = d - (uInt)(q - s->window); /* bytes from offset to end */
-              r = s->end - e;           /* pointer to offset */
-              if (c > e)                /* if source crosses, */
-              {
-                c -= e;                 /* copy to end of window */
-                do {
-                  *q++ = *r++;
-                } while (--e);
-                r = s->window;          /* copy rest from start of window */
-              }
-            }
-            do {                        /* copy all or what's left */
-              *q++ = *r++;
-            } while (--c);
-            break;
-          }
-          else if ((e & 64) == 0)
-            e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
-          else
-          {
-            z->msg = (char*)"invalid distance code";
-            UNGRAB
-            UPDATE
-            return Z_DATA_ERROR;
-          }
-        } while (1);
-        break;
-      }
-      if ((e & 64) == 0)
-      {
-        if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
-        {
-          DUMPBITS(t->bits)
-          Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                    "inflate:         * literal '%c'\n" :
-                    "inflate:         * literal 0x%02x\n", t->base));
-          *q++ = (Byte)t->base;
-          m--;
-          break;
-        }
-      }
-      else if (e & 32)
-      {
-        Tracevv((stderr, "inflate:         * end of block\n"));
-        UNGRAB
-        UPDATE
-        return Z_STREAM_END;
-      }
-      else
-      {
-        z->msg = (char*)"invalid literal/length code";
-        UNGRAB
-        UPDATE
-        return Z_DATA_ERROR;
-      }
-    } while (1);
-  } while (m >= 258 && n >= 10);
-
-  /* not enough input or output--restore pointers and return */
-  UNGRAB
-  UPDATE
-  return Z_OK;
-}
-/* --- inffast.c */
-
-/* +++ zutil.c */
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: zutil.c,v 1.17 1996/07/24 13:41:12 me Exp $ */
-
-#ifdef DEBUG_ZLIB
-#include <stdio.h>
-#endif
-
-/* #include "zutil.h" */
-
-#ifndef NO_DUMMY_DECL
-struct internal_state      {int dummy;}; /* for buggy compilers */
-#endif
-
-#ifndef STDC
-extern void exit OF((int));
-#endif
-
-const char *z_errmsg[10] = {
-"need dictionary",     /* Z_NEED_DICT       2  */
-"stream end",          /* Z_STREAM_END      1  */
-"",                    /* Z_OK              0  */
-"file error",          /* Z_ERRNO         (-1) */
-"stream error",        /* Z_STREAM_ERROR  (-2) */
-"data error",          /* Z_DATA_ERROR    (-3) */
-"insufficient memory", /* Z_MEM_ERROR     (-4) */
-"buffer error",        /* Z_BUF_ERROR     (-5) */
-"incompatible version",/* Z_VERSION_ERROR (-6) */
-""};
-
-
-const char *zlibVersion()
-{
-    return ZLIB_VERSION;
-}
-
-#ifdef DEBUG_ZLIB
-void z_error (m)
-    char *m;
-{
-    fprintf(stderr, "%s\n", m);
-    exit(1);
-}
-#endif
-
-#ifndef HAVE_MEMCPY
-
-void zmemcpy(dest, source, len)
-    Bytef* dest;
-    Bytef* source;
-    uInt  len;
-{
-    if (len == 0) return;
-    do {
-        *dest++ = *source++; /* ??? to be unrolled */
-    } while (--len != 0);
-}
-
-int zmemcmp(s1, s2, len)
-    Bytef* s1;
-    Bytef* s2;
-    uInt  len;
-{
-    uInt j;
-
-    for (j = 0; j < len; j++) {
-        if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
-    }
-    return 0;
-}
-
-void zmemzero(dest, len)
-    Bytef* dest;
-    uInt  len;
-{
-    if (len == 0) return;
-    do {
-        *dest++ = 0;  /* ??? to be unrolled */
-    } while (--len != 0);
-}
-#endif
-
-#ifdef __TURBOC__
-#if (defined( __BORLANDC__) || !defined(SMALL_MEDIUM)) && !defined(__32BIT__)
-/* Small and medium model in Turbo C are for now limited to near allocation
- * with reduced MAX_WBITS and MAX_MEM_LEVEL
- */
-#  define MY_ZCALLOC
-
-/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
- * and farmalloc(64K) returns a pointer with an offset of 8, so we
- * must fix the pointer. Warning: the pointer must be put back to its
- * original form in order to free it, use zcfree().
- */
-
-#define MAX_PTR 10
-/* 10*64K = 640K */
-
-local int next_ptr = 0;
-
-typedef struct ptr_table_s {
-    voidpf org_ptr;
-    voidpf new_ptr;
-} ptr_table;
-
-local ptr_table table[MAX_PTR];
-/* This table is used to remember the original form of pointers
- * to large buffers (64K). Such pointers are normalized with a zero offset.
- * Since MSDOS is not a preemptive multitasking OS, this table is not
- * protected from concurrent access. This hack doesn't work anyway on
- * a protected system like OS/2. Use Microsoft C instead.
- */
-
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
-    voidpf buf = opaque; /* just to make some compilers happy */
-    ulg bsize = (ulg)items*size;
-
-    /* If we allocate less than 65520 bytes, we assume that farmalloc
-     * will return a usable pointer which doesn't have to be normalized.
-     */
-    if (bsize < 65520L) {
-        buf = farmalloc(bsize);
-        if (*(ush*)&buf != 0) return buf;
-    } else {
-        buf = farmalloc(bsize + 16L);
-    }
-    if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
-    table[next_ptr].org_ptr = buf;
-
-    /* Normalize the pointer to seg:0 */
-    *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
-    *(ush*)&buf = 0;
-    table[next_ptr++].new_ptr = buf;
-    return buf;
-}
-
-void  zcfree (voidpf opaque, voidpf ptr)
-{
-    int n;
-    if (*(ush*)&ptr != 0) { /* object < 64K */
-        farfree(ptr);
-        return;
-    }
-    /* Find the original pointer */
-    for (n = 0; n < next_ptr; n++) {
-        if (ptr != table[n].new_ptr) continue;
-
-        farfree(table[n].org_ptr);
-        while (++n < next_ptr) {
-            table[n-1] = table[n];
-        }
-        next_ptr--;
-        return;
-    }
-    ptr = opaque; /* just to make some compilers happy */
-    Assert(0, "zcfree: ptr not found");
-}
-#endif
-#endif /* __TURBOC__ */
-
-
-#if defined(M_I86) && !defined(__32BIT__)
-/* Microsoft C in 16-bit mode */
-
-#  define MY_ZCALLOC
-
-#if (!defined(_MSC_VER) || (_MSC_VER < 600))
-#  define _halloc  halloc
-#  define _hfree   hfree
-#endif
-
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
-    if (opaque) opaque = 0; /* to make compiler happy */
-    return _halloc((long)items, size);
-}
-
-void  zcfree (voidpf opaque, voidpf ptr)
-{
-    if (opaque) opaque = 0; /* to make compiler happy */
-    _hfree(ptr);
-}
-
-#endif /* MSC */
-
-
-#ifndef MY_ZCALLOC /* Any system without a special alloc function */
-
-#ifndef STDC
-extern voidp  calloc OF((uInt items, uInt size));
-extern void   free   OF((voidpf ptr));
-#endif
-
-voidpf zcalloc (opaque, items, size)
-    voidpf opaque;
-    unsigned items;
-    unsigned size;
-{
-    if (opaque) items += size - size; /* make compiler happy */
-    return (voidpf)calloc(items, size);
-}
-
-void  zcfree (opaque, ptr)
-    voidpf opaque;
-    voidpf ptr;
-{
-    free(ptr);
-    if (opaque) return; /* make compiler happy */
-}
-
-#endif /* MY_ZCALLOC */
-/* --- zutil.c */
-
-/* +++ adler32.c */
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: adler32.c,v 1.10 1996/05/22 11:52:18 me Exp $ */
-
-/* #include "zlib.h" */
-
-#define BASE 65521L /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
-#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
-#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
-#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
-#define DO16(buf)   DO8(buf,0); DO8(buf,8);
-
-/* ========================================================================= */
-uLong adler32(adler, buf, len)
-    uLong adler;
-    const Bytef *buf;
-    uInt len;
-{
-    unsigned long s1 = adler & 0xffff;
-    unsigned long s2 = (adler >> 16) & 0xffff;
-    int k;
-
-    if (buf == Z_NULL) return 1L;
-
-    while (len > 0) {
-        k = len < NMAX ? len : NMAX;
-        len -= k;
-        while (k >= 16) {
-            DO16(buf);
-	    buf += 16;
-            k -= 16;
-        }
-        if (k != 0) do {
-            s1 += *buf++;
-	    s2 += s1;
-        } while (--k);
-        s1 %= BASE;
-        s2 %= BASE;
-    }
-    return (s2 << 16) | s1;
-}
-/* --- adler32.c */
diff --git a/mdk-stage1/ppp/common/zlib.h b/mdk-stage1/ppp/common/zlib.h
deleted file mode 100644
index 188ddaff9..000000000
--- a/mdk-stage1/ppp/common/zlib.h
+++ /dev/null
@@ -1,1010 +0,0 @@
-/*	$Id$	*/
-
-/*
- * This file is derived from zlib.h and zconf.h from the zlib-1.0.4
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.
- */
-
-/*
- *  ==FILEVERSION 971127==
- *
- * This marker is used by the Linux installation script to determine
- * whether an up-to-date version of this file is already installed.
- */
-
-
-/* +++ zlib.h */
-/* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.0.4, Jul 24th, 1996.
-
-  Copyright (C) 1995-1996 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
-
-
-  The data format used by the zlib library is described by RFCs (Request for
-  Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
-  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
-*/
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* +++ zconf.h */
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: zconf.h,v 1.20 1996/07/02 15:09:28 me Exp $ */
-
-#ifndef _ZCONF_H
-#define _ZCONF_H
-
-/*
- * If you *really* need a unique prefix for all types and library functions,
- * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
- */
-#ifdef Z_PREFIX
-#  define deflateInit_	z_deflateInit_
-#  define deflate	z_deflate
-#  define deflateEnd	z_deflateEnd
-#  define inflateInit_ 	z_inflateInit_
-#  define inflate	z_inflate
-#  define inflateEnd	z_inflateEnd
-#  define deflateInit2_	z_deflateInit2_
-#  define deflateSetDictionary z_deflateSetDictionary
-#  define deflateCopy	z_deflateCopy
-#  define deflateReset	z_deflateReset
-#  define deflateParams	z_deflateParams
-#  define inflateInit2_	z_inflateInit2_
-#  define inflateSetDictionary z_inflateSetDictionary
-#  define inflateSync	z_inflateSync
-#  define inflateReset	z_inflateReset
-#  define compress	z_compress
-#  define uncompress	z_uncompress
-#  define adler32	z_adler32
-#  define crc32		z_crc32
-#  define get_crc_table z_get_crc_table
-
-#  define Byte		z_Byte
-#  define uInt		z_uInt
-#  define uLong		z_uLong
-#  define Bytef	        z_Bytef
-#  define charf		z_charf
-#  define intf		z_intf
-#  define uIntf		z_uIntf
-#  define uLongf	z_uLongf
-#  define voidpf	z_voidpf
-#  define voidp		z_voidp
-#endif
-
-#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
-#  define WIN32
-#endif
-#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386)
-#  ifndef __32BIT__
-#    define __32BIT__
-#  endif
-#endif
-#if defined(__MSDOS__) && !defined(MSDOS)
-#  define MSDOS
-#endif
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- */
-#if defined(MSDOS) && !defined(__32BIT__)
-#  define MAXSEG_64K
-#endif
-#ifdef MSDOS
-#  define UNALIGNED_OK
-#endif
-
-#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32))  && !defined(STDC)
-#  define STDC
-#endif
-#if (defined(__STDC__) || defined(__cplusplus)) && !defined(STDC)
-#  define STDC
-#endif
-
-#ifndef STDC
-#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-#    define const
-#  endif
-#endif
-
-/* Some Mac compilers merge all .h files incorrectly: */
-#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__)
-#  define NO_DUMMY_DECL
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-#  ifdef MAXSEG_64K
-#    define MAX_MEM_LEVEL 8
-#  else
-#    define MAX_MEM_LEVEL 9
-#  endif
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
-#ifndef MAX_WBITS
-#  define MAX_WBITS   15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
-            1 << (windowBits+2)   +  1 << (memLevel+9)
- that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
-     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
-   The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
-                        /* Type declarations */
-
-#ifndef OF /* function prototypes */
-#  ifdef STDC
-#    define OF(args)  args
-#  else
-#    define OF(args)  ()
-#  endif
-#endif
-
-/* The following definitions for FAR are needed only for MSDOS mixed
- * model programming (small or medium model with some far allocations).
- * This was tested only with MSC; for other MSDOS compilers you may have
- * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
- * just define FAR to be empty.
- */
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__)
-   /* MSC small or medium model */
-#  define SMALL_MEDIUM
-#  ifdef _MSC_VER
-#    define FAR __far
-#  else
-#    define FAR far
-#  endif
-#endif
-#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
-#  ifndef __32BIT__
-#    define SMALL_MEDIUM
-#    define FAR __far
-#  endif
-#endif
-#ifndef FAR
-#   define FAR
-#endif
-
-typedef unsigned char  Byte;  /* 8 bits */
-typedef unsigned int   uInt;  /* 16 bits or more */
-typedef unsigned long  uLong; /* 32 bits or more */
-
-#if defined(__BORLANDC__) && defined(SMALL_MEDIUM)
-   /* Borland C/C++ ignores FAR inside typedef */
-#  define Bytef Byte FAR
-#else
-   typedef Byte  FAR Bytef;
-#endif
-typedef char  FAR charf;
-typedef int   FAR intf;
-typedef uInt  FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
-   typedef void FAR *voidpf;
-   typedef void     *voidp;
-#else
-   typedef Byte FAR *voidpf;
-   typedef Byte     *voidp;
-#endif
-
-
-/* Compile with -DZLIB_DLL for Windows DLL support */
-#if (defined(_WINDOWS) || defined(WINDOWS)) && defined(ZLIB_DLL)
-#  include <windows.h>
-#  define EXPORT  WINAPI
-#else
-#  define EXPORT
-#endif
-
-#endif /* _ZCONF_H */
-/* --- zconf.h */
-
-#define ZLIB_VERSION "1.0.4P"
-
-/* 
-     The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed
-  data.  This version of the library supports only one compression method
-  (deflation) but other algorithms may be added later and will have the same
-  stream interface.
-
-     For compression the application must provide the output buffer and
-  may optionally provide the input buffer for optimization. For decompression,
-  the application must provide the input buffer and may optionally provide
-  the output buffer for optimization.
-
-     Compression can be done in a single step if the buffers are large
-  enough (for example if an input file is mmap'ed), or can be done by
-  repeated calls of the compression function.  In the latter case, the
-  application must provide more input and/or consume the output
-  (providing more output space) before each call.
-
-     The library does not install any signal handler. It is recommended to
-  add at least a handler for SIGSEGV when decompressing; the library checks
-  the consistency of the input data whenever possible but may go nuts
-  for some forms of corrupted input.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
-
-struct internal_state;
-
-typedef struct z_stream_s {
-    Bytef    *next_in;  /* next input byte */
-    uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
-
-    Bytef    *next_out; /* next output byte should be put there */
-    uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
-
-    char     *msg;      /* last error message, NULL if no error */
-    struct internal_state FAR *state; /* not visible by applications */
-
-    alloc_func zalloc;  /* used to allocate the internal state */
-    free_func  zfree;   /* used to free the internal state */
-    voidpf     opaque;  /* private data object passed to zalloc and zfree */
-
-    int     data_type;  /* best guess about the data type: ascii or binary */
-    uLong   adler;      /* adler32 value of the uncompressed data */
-    uLong   reserved;   /* reserved for future use */
-} z_stream;
-
-typedef z_stream FAR *z_streamp;
-
-/*
-   The application must update next_in and avail_in when avail_in has
-   dropped to zero. It must update next_out and avail_out when avail_out
-   has dropped to zero. The application must initialize zalloc, zfree and
-   opaque before calling the init function. All other fields are set by the
-   compression library and must not be updated by the application.
-
-   The opaque value provided by the application will be passed as the first
-   parameter for calls of zalloc and zfree. This can be useful for custom
-   memory management. The compression library attaches no meaning to the
-   opaque value.
-
-   zalloc must return Z_NULL if there is not enough memory for the object.
-   On 16-bit systems, the functions zalloc and zfree must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this
-   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
-   pointers returned by zalloc for objects of exactly 65536 bytes *must*
-   have their offset normalized to zero. The default allocation function
-   provided by this library ensures this (see zutil.c). To reduce memory
-   requirements and avoid any allocation of 64K objects, at the expense of
-   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
-   The fields total_in and total_out can be used for statistics or
-   progress reports. After compression, total_in holds the total size of
-   the uncompressed data and may be saved for use in the decompressor
-   (particularly if the decompressor wants to decompress everything in
-   a single step).
-*/
-
-                        /* constants */
-
-#define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1
-#define Z_PACKET_FLUSH	2
-#define Z_SYNC_FLUSH    3
-#define Z_FULL_FLUSH    4
-#define Z_FINISH        5
-/* Allowed flush values; see deflate() below for details */
-
-#define Z_OK            0
-#define Z_STREAM_END    1
-#define Z_NEED_DICT     2
-#define Z_ERRNO        (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR   (-3)
-#define Z_MEM_ERROR    (-4)
-#define Z_BUF_ERROR    (-5)
-#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
- */
-
-#define Z_NO_COMPRESSION         0
-#define Z_BEST_SPEED             1
-#define Z_BEST_COMPRESSION       9
-#define Z_DEFAULT_COMPRESSION  (-1)
-/* compression levels */
-
-#define Z_FILTERED            1
-#define Z_HUFFMAN_ONLY        2
-#define Z_DEFAULT_STRATEGY    0
-/* compression strategy; see deflateInit2() below for details */
-
-#define Z_BINARY   0
-#define Z_ASCII    1
-#define Z_UNKNOWN  2
-/* Possible values of the data_type field */
-
-#define Z_DEFLATED   8
-/* The deflate compression method (the only one supported in this version) */
-
-#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
-
-#define zlib_version zlibVersion()
-/* for compatibility with versions < 1.0.2 */
-
-                        /* basic functions */
-
-extern const char * EXPORT zlibVersion OF((void));
-/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is
-   not compatible with the zlib.h header file used by the application.
-   This check is automatically made by deflateInit and inflateInit.
- */
-
-/* 
-extern int EXPORT deflateInit OF((z_streamp strm, int level));
-
-     Initializes the internal stream state for compression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.
-   If zalloc and zfree are set to Z_NULL, deflateInit updates them to
-   use default allocation functions.
-
-     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
-   1 gives best speed, 9 gives best compression, 0 gives no compression at
-   all (the input data is simply copied a block at a time).
-   Z_DEFAULT_COMPRESSION requests a default compromise between speed and
-   compression (currently equivalent to level 6).
-
-     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if level is not a valid compression level,
-   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
-   with the version assumed by the caller (ZLIB_VERSION).
-   msg is set to null if there is no error message.  deflateInit does not
-   perform any compression: this will be done by deflate().
-*/
-
-
-extern int EXPORT deflate OF((z_streamp strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Compress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in and avail_in are updated and
-    processing will resume at this point for the next call of deflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly. This action is forced if the parameter flush is non zero.
-    Forcing flush frequently degrades the compression ratio, so this parameter
-    should be set only when necessary (in interactive applications).
-    Some output may be provided even if flush is not set.
-
-  Before the call of deflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating avail_in or avail_out accordingly; avail_out
-  should never be zero before the call. The application can consume the
-  compressed output when it wants, for example when the output buffer is full
-  (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
-  and with zero avail_out, it must be called again after making room in the
-  output buffer because there might be more output pending.
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression
-  block is terminated and flushed to the output buffer so that the
-  decompressor can get all input data available so far. For method 9, a future
-  variant on method 8, the current block will be flushed but not terminated.
-  Z_SYNC_FLUSH has the same effect as partial flush except that the compressed
-  output is byte aligned (the compressor can clear its internal bit buffer)
-  and the current block is always terminated; this can be useful if the
-  compressor has to be restarted from scratch after an interruption (in which
-  case the internal state of the compressor may be lost).
-    If flush is set to Z_FULL_FLUSH, the compression block is terminated, a
-  special marker is output and the compression dictionary is discarded; this
-  is useful to allow the decompressor to synchronize if one compressed block
-  has been damaged (see inflateSync below).  Flushing degrades compression and
-  so should be used only when necessary.  Using Z_FULL_FLUSH too often can
-  seriously degrade the compression. If deflate returns with avail_out == 0,
-  this function must be called again with the same value of the flush
-  parameter and more output space (updated avail_out), until the flush is
-  complete (deflate returns with non-zero avail_out).
-
-    If the parameter flush is set to Z_PACKET_FLUSH, the compression
-  block is terminated, and a zero-length stored block is output,
-  omitting the length bytes (the effect of this is that the 3-bit type
-  code 000 for a stored block is output, and the output is then
-  byte-aligned).  This is designed for use at the end of a PPP packet.
-
-    If the parameter flush is set to Z_FINISH, pending input is processed,
-  pending output is flushed and deflate returns with Z_STREAM_END if there
-  was enough output space; if deflate returns with Z_OK, this function must be
-  called again with Z_FINISH and more output space (updated avail_out) but no
-  more input data, until it returns with Z_STREAM_END or an error. After
-  deflate has returned Z_STREAM_END, the only possible operations on the
-  stream are deflateReset or deflateEnd.
-  
-    Z_FINISH can be used immediately after deflateInit if all the compression
-  is to be done in a single step. In this case, avail_out must be at least
-  0.1% larger than avail_in plus 12 bytes.  If deflate does not return
-  Z_STREAM_END, then it must be called again as described above.
-
-    deflate() may update data_type if it can make a good guess about
-  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
-  binary. This field is only for information purposes and does not affect
-  the compression algorithm in any manner.
-
-    deflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if all input has been
-  consumed and all output has been produced (only when flush is set to
-  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible.
-*/
-
-
-extern int EXPORT deflateEnd OF((z_streamp strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
-   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
-   prematurely (some input or output was discarded). In the error case,
-   msg may be set but then points to a static string (which must not be
-   deallocated).
-*/
-
-
-/* 
-extern int EXPORT inflateInit OF((z_streamp strm));
-
-     Initializes the internal stream state for decompression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.  If
-   zalloc and zfree are set to Z_NULL, inflateInit updates them to use default
-   allocation functions.
-
-     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_VERSION_ERROR if the zlib library version is incompatible
-   with the version assumed by the caller.  msg is set to null if there is no
-   error message. inflateInit does not perform any decompression: this will be
-   done by inflate().
-*/
-
-
-extern int EXPORT inflate OF((z_streamp strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Decompress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing
-    will resume at this point for the next call of inflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() provides as much output as possible, until there
-    is no more input data or no more space in the output buffer (see below
-    about the flush parameter).
-
-  Before the call of inflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating the next_* and avail_* values accordingly.
-  The application can consume the uncompressed output when it wants, for
-  example when the output buffer is full (avail_out == 0), or after each
-  call of inflate(). If inflate returns Z_OK and with zero avail_out, it
-  must be called again after making room in the output buffer because there
-  might be more output pending.
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
-  inflate flushes as much output as possible to the output buffer. The
-  flushing behavior of inflate is not specified for values of the flush
-  parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
-  current implementation actually flushes as much output as possible
-  anyway.  For Z_PACKET_FLUSH, inflate checks that once all the input data
-  has been consumed, it is expecting to see the length field of a stored
-  block; if not, it returns Z_DATA_ERROR.
-
-    inflate() should normally be called until it returns Z_STREAM_END or an
-  error. However if all decompression is to be performed in a single step
-  (a single call of inflate), the parameter flush should be set to
-  Z_FINISH. In this case all pending input is processed and all pending
-  output is flushed; avail_out must be large enough to hold all the
-  uncompressed data. (The size of the uncompressed data may have been saved
-  by the compressor for this purpose.) The next operation on this stream must
-  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
-  is never required, but can be used to inform inflate that a faster routine
-  may be used for the single inflate() call.
-
-    inflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if the end of the
-  compressed data has been reached and all uncompressed output has been
-  produced, Z_NEED_DICT if a preset dictionary is needed at this point (see
-  inflateSetDictionary below), Z_DATA_ERROR if the input data was corrupted,
-  Z_STREAM_ERROR if the stream structure was inconsistent (for example if
-  next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
-  Z_BUF_ERROR if no progress is possible or if there was not enough room in
-  the output buffer when Z_FINISH is used. In the Z_DATA_ERROR case, the
-  application may then call inflateSync to look for a good compression block.
-  In the Z_NEED_DICT case, strm->adler is set to the Adler32 value of the
-  dictionary chosen by the compressor.
-*/
-
-
-extern int EXPORT inflateEnd OF((z_streamp strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent. In the error case, msg may be set but then points to a
-   static string (which must not be deallocated).
-*/
-
-                        /* Advanced functions */
-
-/*
-    The following functions are needed only in some special applications.
-*/
-
-/*   
-extern int EXPORT deflateInit2 OF((z_streamp strm,
-                                   int  level,
-                                   int  method,
-                                   int  windowBits,
-                                   int  memLevel,
-                                   int  strategy));
-
-     This is another version of deflateInit with more compression options. The
-   fields next_in, zalloc, zfree and opaque must be initialized before by
-   the caller.
-
-     The method parameter is the compression method. It must be Z_DEFLATED in
-   this version of the library. (Method 9 will allow a 64K history buffer and
-   partial block flushes.)
-
-     The windowBits parameter is the base two logarithm of the window size
-   (the size of the history buffer).  It should be in the range 8..15 for this
-   version of the library (the value 16 will be allowed for method 9). Larger
-   values of this parameter result in better compression at the expense of
-   memory usage. The default value is 15 if deflateInit is used instead.
-
-     The memLevel parameter specifies how much memory should be allocated
-   for the internal compression state. memLevel=1 uses minimum memory but
-   is slow and reduces compression ratio; memLevel=9 uses maximum memory
-   for optimal speed. The default value is 8. See zconf.h for total memory
-   usage as a function of windowBits and memLevel.
-
-     The strategy parameter is used to tune the compression algorithm. Use the
-   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
-   filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
-   string match).  Filtered data consists mostly of small values with a
-   somewhat random distribution. In this case, the compression algorithm is
-   tuned to compress them better. The effect of Z_FILTERED is to force more
-   Huffman coding and less string matching; it is somewhat intermediate
-   between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
-   the compression ratio but not the correctness of the compressed output even
-   if it is not set appropriately.
-
-     If next_in is not null, the library will use this buffer to hold also
-   some history information; the buffer must either hold the entire input
-   data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in
-   is null, the library will allocate its own history buffer (and leave next_in
-   null). next_out need not be provided here but must be provided by the
-   application for the next call of deflate().
-
-     If the history buffer is provided by the application, next_in must
-   must never be changed by the application since the compressor maintains
-   information inside this buffer from call to call; the application
-   must provide more input only by increasing avail_in. next_in is always
-   reset by the library in this case.
-
-      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   an invalid method). msg is set to null if there is no error message.
-   deflateInit2 does not perform any compression: this will be done by
-   deflate(). 
-*/
-                            
-extern int EXPORT deflateSetDictionary OF((z_streamp strm,
-                                           const Bytef *dictionary,
-				           uInt  dictLength));
-/*
-     Initializes the compression dictionary (history buffer) from the given
-   byte sequence without producing any compressed output. This function must
-   be called immediately after deflateInit or deflateInit2, before any call
-   of deflate. The compressor and decompressor must use exactly the same
-   dictionary (see inflateSetDictionary).
-     The dictionary should consist of strings (byte sequences) that are likely
-   to be encountered later in the data to be compressed, with the most commonly
-   used strings preferably put towards the end of the dictionary. Using a
-   dictionary is most useful when the data to be compressed is short and
-   can be predicted with good accuracy; the data can then be compressed better
-   than with the default empty dictionary. In this version of the library,
-   only the last 32K bytes of the dictionary are used.
-     Upon return of this function, strm->adler is set to the Adler32 value
-   of the dictionary; the decompressor may later use this value to determine
-   which dictionary has been used by the compressor. (The Adler32 value
-   applies to the whole dictionary even if only a subset of the dictionary is
-   actually used by the compressor.)
-
-     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state
-   is inconsistent (for example if deflate has already been called for this
-   stream). deflateSetDictionary does not perform any compression: this will
-   be done by deflate(). 
-*/
-
-extern int EXPORT deflateCopy OF((z_streamp dest,
-                                  z_streamp source));
-/*
-     Sets the destination stream as a complete copy of the source stream.  If
-   the source stream is using an application-supplied history buffer, a new
-   buffer is allocated for the destination stream.  The compressed output
-   buffer is always application-supplied. It's the responsibility of the
-   application to provide the correct values of next_out and avail_out for the
-   next call of deflate.
-
-     This function can be useful when several compression strategies will be
-   tried, for example when there are several ways of pre-processing the input
-   data with a filter. The streams that will be discarded should then be freed
-   by calling deflateEnd.  Note that deflateCopy duplicates the internal
-   compression state which can be quite large, so this strategy is slow and
-   can consume lots of memory.
-
-     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
-   (such as zalloc being NULL). msg is left unchanged in both source and
-   destination.
-*/
-
-extern int EXPORT deflateReset OF((z_streamp strm));
-/*
-     This function is equivalent to deflateEnd followed by deflateInit,
-   but does not free and reallocate all the internal compression state.
-   The stream will keep the same compression level and any other attributes
-   that may have been set by deflateInit2.
-
-      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int EXPORT deflateParams OF((z_streamp strm, int level, int strategy));
-/*
-     Dynamically update the compression level and compression strategy.
-   This can be used to switch between compression and straight copy of
-   the input data, or to switch to a different kind of input data requiring
-   a different strategy. If the compression level is changed, the input
-   available so far is compressed with the old level (and may be flushed);
-   the new level will take effect only at the next call of deflate().
-
-     Before the call of deflateParams, the stream state must be set as for
-   a call of deflate(), since the currently available input may have to
-   be compressed and flushed. In particular, strm->avail_out must be non-zero.
-
-     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
-   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
-   if strm->avail_out was zero.
-*/
-
-extern int EXPORT deflateOutputPending OF((z_streamp strm));
-/*
-     Returns the number of bytes of output which are immediately
-   available from the compressor (i.e. without any further input
-   or flush).
-*/
-
-/*   
-extern int EXPORT inflateInit2 OF((z_streamp strm,
-                                   int  windowBits));
-
-     This is another version of inflateInit with more compression options. The
-   fields next_out, zalloc, zfree and opaque must be initialized before by
-   the caller.
-
-     The windowBits parameter is the base two logarithm of the maximum window
-   size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library (the value 16 will be allowed soon). The
-   default value is 15 if inflateInit is used instead. If a compressed stream
-   with a larger window size is given as input, inflate() will return with
-   the error code Z_DATA_ERROR instead of trying to allocate a larger window.
-
-     If next_out is not null, the library will use this buffer for the history
-   buffer; the buffer must either be large enough to hold the entire output
-   data, or have at least 1<<windowBits bytes.  If next_out is null, the
-   library will allocate its own buffer (and leave next_out null). next_in
-   need not be provided here but must be provided by the application for the
-   next call of inflate().
-
-     If the history buffer is provided by the application, next_out must
-   never be changed by the application since the decompressor maintains
-   history information inside this buffer from call to call; the application
-   can only reset next_out to the beginning of the history buffer when
-   avail_out is zero and all output has been consumed.
-
-      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   windowBits < 8). msg is set to null if there is no error message.
-   inflateInit2 does not perform any decompression: this will be done by
-   inflate().
-*/
-
-extern int EXPORT inflateSetDictionary OF((z_streamp strm,
-				           const Bytef *dictionary,
-					   uInt  dictLength));
-/*
-     Initializes the decompression dictionary (history buffer) from the given
-   uncompressed byte sequence. This function must be called immediately after
-   a call of inflate if this call returned Z_NEED_DICT. The dictionary chosen
-   by the compressor can be determined from the Adler32 value returned by this
-   call of inflate. The compressor and decompressor must use exactly the same
-   dictionary (see deflateSetDictionary).
-
-     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state is
-   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
-   expected one (incorrect Adler32 value). inflateSetDictionary does not
-   perform any decompression: this will be done by subsequent calls of
-   inflate().
-*/
-
-extern int EXPORT inflateSync OF((z_streamp strm));
-/* 
-    Skips invalid compressed data until the special marker (see deflate()
-  above) can be found, or until all available input is skipped. No output
-  is provided.
-
-    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
-  if no more input was provided, Z_DATA_ERROR if no marker has been found,
-  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
-  case, the application may save the current current value of total_in which
-  indicates where valid compressed data was found. In the error case, the
-  application may repeatedly call inflateSync, providing more input each time,
-  until success or end of the input data.
-*/
-
-extern int EXPORT inflateReset OF((z_streamp strm));
-/*
-     This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.
-   The stream will keep attributes that may have been set by inflateInit2.
-
-      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateIncomp OF((z_stream *strm));
-/*
-     This function adds the data at next_in (avail_in bytes) to the output
-   history without performing any output.  There must be no pending output,
-   and the decompressor must be expecting to see the start of a block.
-   Calling this function is equivalent to decompressing a stored block
-   containing the data at next_in (except that the data is not output).
-*/
-
-                        /* utility functions */
-
-/*
-     The following utility functions are implemented on top of the
-   basic stream-oriented functions. To simplify the interface, some
-   default options are assumed (compression level, window size,
-   standard memory allocation functions). The source code of these
-   utility functions can easily be modified if you need special options.
-*/
-
-extern int EXPORT compress OF((Bytef *dest,   uLongf *destLen,
-			       const Bytef *source, uLong sourceLen));
-/*
-     Compresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be at least 0.1% larger than
-   sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
-   compressed buffer.
-     This function can be used to compress a whole file at once if the
-   input file is mmap'ed.
-     compress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer.
-*/
-
-extern int EXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
-				 const Bytef *source, uLong sourceLen));
-/*
-     Decompresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be large enough to hold the
-   entire uncompressed data. (The size of the uncompressed data must have
-   been saved previously by the compressor and transmitted to the decompressor
-   by some mechanism outside the scope of this compression library.)
-   Upon exit, destLen is the actual size of the compressed buffer.
-     This function can be used to decompress a whole file at once if the
-   input file is mmap'ed.
-
-     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer, or Z_DATA_ERROR if the input data was corrupted.
-*/
-
-
-typedef voidp gzFile;
-
-extern gzFile EXPORT gzopen  OF((const char *path, const char *mode));
-/*
-     Opens a gzip (.gz) file for reading or writing. The mode parameter
-   is as in fopen ("rb" or "wb") but can also include a compression level
-   ("wb9").  gzopen can be used to read a file which is not in gzip format;
-   in this case gzread will directly read from the file without decompression.
-     gzopen returns NULL if the file could not be opened or if there was
-   insufficient memory to allocate the (de)compression state; errno
-   can be checked to distinguish the two cases (if errno is zero, the
-   zlib error is Z_MEM_ERROR).
-*/
-
-extern gzFile EXPORT gzdopen  OF((int fd, const char *mode));
-/*
-     gzdopen() associates a gzFile with the file descriptor fd.  File
-   descriptors are obtained from calls like open, dup, creat, pipe or
-   fileno (in the file has been previously opened with fopen).
-   The mode parameter is as in gzopen.
-     The next call of gzclose on the returned gzFile will also close the
-   file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
-   descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
-     gzdopen returns NULL if there was insufficient memory to allocate
-   the (de)compression state.
-*/
-
-extern int EXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
-/*
-     Reads the given number of uncompressed bytes from the compressed file.
-   If the input file was not in gzip format, gzread copies the given number
-   of bytes into the buffer.
-     gzread returns the number of uncompressed bytes actually read (0 for
-   end of file, -1 for error). */
-
-extern int EXPORT    gzwrite OF((gzFile file, const voidp buf, unsigned len));
-/*
-     Writes the given number of uncompressed bytes into the compressed file.
-   gzwrite returns the number of uncompressed bytes actually written
-   (0 in case of error).
-*/
-
-extern int EXPORT    gzflush OF((gzFile file, int flush));
-/*
-     Flushes all pending output into the compressed file. The parameter
-   flush is as in the deflate() function. The return value is the zlib
-   error number (see function gzerror below). gzflush returns Z_OK if
-   the flush parameter is Z_FINISH and all output could be flushed.
-     gzflush should be called only when strictly necessary because it can
-   degrade compression.
-*/
-
-extern int EXPORT    gzclose OF((gzFile file));
-/*
-     Flushes all pending output if necessary, closes the compressed file
-   and deallocates all the (de)compression state. The return value is the zlib
-   error number (see function gzerror below).
-*/
-
-extern const char * EXPORT gzerror OF((gzFile file, int *errnum));
-/*
-     Returns the error message for the last error which occurred on the
-   given compressed file. errnum is set to zlib error number. If an
-   error occurred in the file system and not in the compression library,
-   errnum is set to Z_ERRNO and the application may consult errno
-   to get the exact error code.
-*/
-
-                        /* checksum functions */
-
-/*
-     These functions are not related to compression but are exported
-   anyway because they might be useful in applications using the
-   compression library.
-*/
-
-extern uLong EXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
-
-/*
-     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum. If buf is NULL, this function returns
-   the required initial value for the checksum.
-   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
-   much faster. Usage example:
-
-     uLong adler = adler32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       adler = adler32(adler, buffer, length);
-     }
-     if (adler != original_adler) error();
-*/
-
-extern uLong EXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
-/*
-     Update a running crc with the bytes buf[0..len-1] and return the updated
-   crc. If buf is NULL, this function returns the required initial value
-   for the crc. Pre- and post-conditioning (one's complement) is performed
-   within this function so it shouldn't be done by the application.
-   Usage example:
-
-     uLong crc = crc32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       crc = crc32(crc, buffer, length);
-     }
-     if (crc != original_crc) error();
-*/
-
-
-                        /* various hacks, don't look :) */
-
-/* deflateInit and inflateInit are macros to allow checking the zlib version
- * and the compiler's view of z_stream:
- */
-extern int EXPORT deflateInit_ OF((z_streamp strm, int level,
-			           const char *version, int stream_size));
-extern int EXPORT inflateInit_ OF((z_streamp strm,
-				   const char *version, int stream_size));
-extern int EXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
-				    int windowBits, int memLevel, int strategy,
-				    const char *version, int stream_size));
-extern int EXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
-				    const char *version, int stream_size));
-#define deflateInit(strm, level) \
-        deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit(strm) \
-        inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
-#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
-        deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
-		      (strategy),           ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit2(strm, windowBits) \
-        inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
-
-#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
-    struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-uLongf *get_crc_table OF((void)); /* can be used by asm versions of crc32() */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _ZLIB_H */
-/* --- zlib.h */
diff --git a/mdk-stage1/ppp/configure b/mdk-stage1/ppp/configure
deleted file mode 100755
index 544fb0d71..000000000
--- a/mdk-stage1/ppp/configure
+++ /dev/null
@@ -1,141 +0,0 @@
-#!/bin/sh
-# $Id$
-
-#  if [ -d /NextApps ]; then
-#    system="NeXTStep"
-#  else
-  system=`uname -s`
-  release=`uname -r`
-  machine=`uname -p`
-  arch=`uname -m`
-#  fi
-state="unknown"
-
-case $system in
-  Linux)
-    makext="linux";
-    ksrc="linux";
-    state="known";;
-  SunOS)
-    case $release in
-#      [0-3]*)	state="ancient";;
-#      4*)	state="known"; ksrc="sunos4"; makext="sunos4";;
-      5.[1-6]*)	state="known"; ksrc="solaris"; makext="sol2";;
-      5.[7-9]*)	state="known"; ksrc="solaris"; makext="sol2";
-              case $arch in
-		sun4u)	lp64='y';;
-		*)	;;
-	      esac;;
-    esac;;
-    NetBSD|FreeBSD|ULTRIX|OSF1|NeXTStep|SINIX-?|UNIX_SV|UNIX_System_V)
-      state="notincluded";;
-#    NetBSD)
-#      makext="bsd";
-#      case $release in
-#        0.*)	state="ancient";;
-#        1.0*)	state="ancient";;
-#        1.1*)	state="known"; ksrc="netbsd-1.1";;
-#        1.2*)	state="known"; ksrc="netbsd-1.2"; makext="netbsd-1.2";;
-#        1.[3-9]*|[2-9]*)
-#  		state="late"; ksrc="netbsd-1.2";;
-#      esac;;
-#    ULTRIX)
-#      makext="ultrix";
-#      case $release in
-#        [0-3]*)	state="ancient";;
-#        4.[01]*)	state="early"; ksrc="ultrix";;
-#        4.[234])	state="known"; ksrc="ultrix";;
-#      esac;;
-#    OSF1)
-#      makext="osf";
-#      case $release in
-#        V1.*)   state="neolithic"; ksrc="osf1";;
-#        V[23].*)	state="neolithic"; ksrc="osf1";;
-#        V4.*)	state="known"; ksrc="osf1";;
-#        V[5-9]*) state="late"; ksrc="osf1";;
-#      esac;;
-#    FreeBSD)
-#      makext="bsd";
-#      case $release in
-#        1.*)	state="known"; ksrc="freebsd-old";;
-#        2.[01]*)	state="known"; ksrc="freebsd-2.0";;
-#        2.2.[2-7]*) state="late"; ksrc="freebsd-2.0";;
-#        2.2.8*)   state="known"; ksrc="freebsd-2.2.8";;
-#        3.[0-1]*)	state="known"; ksrc="freebsd-3.0";;
-#      esac;;
-#    NeXTStep)
-#      makext="NeXT";
-#      ksrc="NeXT";
-#      state="known";;
-#    SINIX-?)
-#      case $release in
-#        5.4[01]) state=known; ksrc=svr4; makext=svr4;;
-#        5.4[2-9]) state=late; ksrc=svr4; makext=svr4;;
-#      esac;;
-#    # Intel SVR4 systems come with a bug in the uname program.  Unless
-#    # your provider fixed the bug, or you get a fix for it, uname -S will
-#    # overwrite the system name with the node name!
-#    UNIX_SV|UNIX_System_V|`uname -n`)
-#      case $release in
-#        4.0) state=known; ksrc=svr4; makext=svr4;;
-#        4.2) state=late; ksrc=svr4; makext=svr4;;
-#      esac;;
-esac
-
-if [ -d "$ksrc" ]; then :; else
-  state="notincluded"
-  unset ksrc
-fi
-
-case $state in
-  neolithic) 
-    echo "This is a newer release on an outdated OS ($system)."
-    echo " This software may or may not work on this OS."
-    echo " You may want to download an older version of PPP for this OS.";;
-  ancient)
-    echo "This is an old release of a supported OS ($system)."
-    echo "This software cannot be used as-is on this system,"
-    echo "but you may be able to port it.  Good luck!"
-    exit;;
-  early)
-    echo "This is an old release of a supported OS ($system)."
-    echo "This software should install and run on this system,"
-    echo "but it hasn't been tested.";;
-  late)
-    echo "This is a newer release of $system than is supported by"
-    echo "this software.  It may or may not work.";;
-  unknown)
-    echo "This software has not been ported to this system.  Sorry.";;
-  notincluded)
-    echo "Support for this system has not been included"
-    echo "in this distribution.  Sorry.";;
-esac
-
-orig_makext=$makext
-
-if [ -d "$ksrc" ]; then
-  echo "Creating links to Makefiles."
-  rm -f Makefile
-  ln -s $ksrc/Makefile.top Makefile
-  echo "  Makefile -> $ksrc/Makefile.top"
-  if [ "$ksrc" = solaris ]; then
-    # Point to 64-bit Makefile extension
-    if [ "$lp64" = y ]; then 
-      makext=$makext-64 
-    fi
-    rm -f $ksrc/Makefile
-    ln -s Makefile.$makext $ksrc/Makefile
-    echo "  $ksrc/Makefile -> Makefile.$makext"
-    # Restore extension
-    if [ "$lp64" = y ]; then 
-      makext=$orig_makext 
-    fi
-  fi
-  for dir in pppd pppstats chat pppdump; do
-    rm -f $dir/Makefile
-    if [ -f $dir/Makefile.$makext ]; then
-      ln -s Makefile.$makext $dir/Makefile
-      echo "  $dir/Makefile -> Makefile.$makext"
-    fi
-  done
-fi
diff --git a/mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux b/mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux
deleted file mode 100644
index 7eb217dac..000000000
--- a/mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux
+++ /dev/null
@@ -1,16 +0,0 @@
-all: pppgetpass.vt pppgetpass.gtk
-
-pppgetpass.vt: pppgetpass.vt.o
-
-pppgetpass.gtk: pppgetpass.gtk.o
-	$(CC) $(LDFLAGS) pppgetpass.gtk.o `gtk-config --libs` -o pppgetpass.gtk
-pppgetpass.gtk.o: pppgetpass.gtk.c
-	$(CC) $(CFLAGS) -c pppgetpass.gtk.c `gtk-config --cflags`
-
-install: all
-	install -m 755 pppgetpass.sh /usr/bin/pppgetpass
-	install -m 4755 -o root -g root pppgetpass.vt /usr/bin/
-	install -m 755 -o root -g root pppgetpass.gtk /usr/X11/bin/
-
-clean:
-	rm -f *.o pppgetpass.gtk pppgetpass.vt core
diff --git a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8 b/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8
deleted file mode 100644
index ade576970..000000000
--- a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8
+++ /dev/null
@@ -1,18 +0,0 @@
-.TH PPPGETPASS 8 "26 Sep 1999"
-.SH NAME
-pppgetpass \- prompt for PAP password
-.SH SYNOPSIS
-.B pppgetpass
-.I client server fd
-.SH DESCRIPTION
-.B pppgetpass
-the outer half of a plugin for PAP password prompting in pppd.
-If the peer requires PAP, and the
-.B passprompt.so
-plugin is loaded into pppd, it will run
-.B /usr/sbin/pppgetpass
-(or another program specified by the
-.B promptprog
-option) to prompt the user for the password.
-.SH SEE ALSO
-pppd(8)
diff --git a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c b/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c
deleted file mode 100644
index 48ca04202..000000000
--- a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c
+++ /dev/null
@@ -1,92 +0,0 @@
-#include <glib.h>
-#include <gdk/gdk.h>
-#include <gtk/gtkwindow.h>
-#include <gtk/gtkmain.h>
-#include <gtk/gtkbutton.h>
-#include <gtk/gtkvbox.h>
-#include <gtk/gtklabel.h>
-#include <gtk/gtkentry.h>
-#include <gtk/gtksignal.h>
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <syslog.h>
-
-int outfd;
-int err;
-
-static void okpressed(void *widget, void *clientdata)
-{
-  GtkWidget *answer=clientdata;
-  gchar *pass;
-  int passlen;
-  ssize_t wrote;
-  (void)widget;
-
-  pass=gtk_entry_get_text(GTK_ENTRY(answer));
-
-  passlen=strlen(pass);
-  if(!passlen)
-    return;
-
-  if((wrote=write(outfd, pass, passlen))!=passlen) {
-    if(wrote<0)
-      syslog(LOG_ERR, "write error on outpipe: %m");
-    else
-      syslog(LOG_ERR, "short write on outpipe");
-    err=1;
-  }
-  gtk_main_quit();
-}
-
-int main(int argc, char **argv)
-{
-  GtkWidget *mainwindow, *vbox, *question, *answer, *ok;
-  char buf[1024];
-  gtk_init(&argc, &argv);
-
-  openlog(argv[0], LOG_PID, LOG_DAEMON);
-  if(argc!=4) {
-    syslog(LOG_WARNING, "Usage error");
-    return 1;
-  }
-  outfd=atoi(argv[3]);
-  mainwindow=gtk_window_new(GTK_WINDOW_TOPLEVEL);
-  gtk_window_set_title(GTK_WINDOW(mainwindow), "pppgetpass");
-  gtk_signal_connect(GTK_OBJECT(mainwindow), "destroy",
-                     GTK_SIGNAL_FUNC(gtk_main_quit), 0);
-
-  vbox=gtk_vbox_new(FALSE, 5);
-  gtk_container_add(GTK_CONTAINER(mainwindow), vbox);
-  gtk_widget_show(vbox);
-
-  if(argv[1][0] && argv[2][0])
-    snprintf(buf, sizeof buf, "Password for PPP client %s on server %s: ", argv[1], argv[2]);
-  else if(argv[1][0] && !argv[2][0])
-    snprintf(buf, sizeof buf, "Password for PPP client %s: ", argv[1]);
-  else if(!argv[1][0] && argv[2][0])
-    snprintf(buf, sizeof buf, "Password for PPP on server %s: ", argv[2]);
-  else
-    snprintf(buf, sizeof buf, "Enter PPP password: ");
-  question=gtk_label_new(buf);
-  gtk_box_pack_start(GTK_BOX(vbox), question, FALSE, TRUE, 0);
-  gtk_widget_show(question);
-
-  answer=gtk_entry_new();
-  gtk_entry_set_visibility(GTK_ENTRY(answer), 0);
-  gtk_box_pack_start(GTK_BOX(vbox), answer, FALSE, TRUE, 0);
-  gtk_widget_show(answer);
-
-  ok=gtk_button_new_with_label("OK");
-  gtk_box_pack_start(GTK_BOX(vbox), ok, FALSE, TRUE, 0);
-  gtk_signal_connect(GTK_OBJECT(ok), "clicked",
-                     GTK_SIGNAL_FUNC(okpressed), answer);
-  gtk_widget_show(ok);
-
-  gtk_widget_show(mainwindow);
-  gtk_main();
-
-  return err;
-}
diff --git a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh b/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh
deleted file mode 100644
index 09c480519..000000000
--- a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-if [ -z "$DISPLAY" ]; then
-  exec pppgetpass.vt "$@"
-else
-  exec pppgetpass.gtk "$@"
-fi
diff --git a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c b/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c
deleted file mode 100644
index a1520883c..000000000
--- a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c
+++ /dev/null
@@ -1,218 +0,0 @@
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <sys/ioctl.h>
-#include <syslog.h>
-#include <termios.h>
-#include <sys/vt.h>
-
-static int console_owner(uid_t, int);
-
-int main(int argc, char **argv)
-{
-  int console;
-  uid_t uid;
-  struct vt_stat origstate;
-  int openvtnum;
-  char openvtname[256];
-  int openvt;
-  gid_t gid;
-  int chowned;
-  FILE *fp;
-  struct termios t;
-  char pass[256], *nl;
-  int outfd, passlen;
-  ssize_t wrote;
-  console=open("/dev/console", O_RDWR);
-
-  uid=getuid();
-  gid=getgid();
-  seteuid(uid);
-
-  openlog(argv[0], LOG_PID, LOG_DAEMON);
-
-  if(argc!=4) {
-    syslog(LOG_WARNING, "Usage error");
-    return 1;
-  }
-
-  if(console<0) {
-    syslog(LOG_ERR, "open(/dev/console): %m");
-    return 1;
-  }
-
-  if(ioctl(console, VT_GETSTATE, &origstate)<0) {
-    syslog(LOG_ERR, "VT_GETSTATE: %m");
-    return 1;
-  }
-
-  if(uid) {
-    if(!console_owner(uid, origstate.v_active)) {
-      int i;
-      for(i=0;i<64;++i) {
-        if(i!=origstate.v_active && console_owner(uid, i))
-          break;
-      }
-      if(i==64) {
-        syslog(LOG_WARNING, "run by uid %lu not at console", (unsigned long)uid);
-        return 1;
-      }
-    }
-  }
-
-  if(ioctl(console, VT_OPENQRY, &openvtnum)<0) {
-    syslog(LOG_ERR, "VT_OPENQRY: %m");
-    return 1;
-  }
-  if(openvtnum==-1) {
-    syslog(LOG_ERR, "No free VTs");
-    return 1;
-  }
-
-  snprintf(openvtname, sizeof openvtname, "/dev/tty%d", openvtnum);
-  seteuid(0);
-  openvt=open(openvtname, O_RDWR);
-  if(openvt<0) {
-    seteuid(uid);
-    syslog(LOG_ERR, "open(%s): %m", openvtname);
-    return 1;
-  }
-
-  chowned=fchown(openvt, uid, gid);
-  if(chowned<0) {
-    seteuid(uid);
-    syslog(LOG_ERR, "fchown(%s): %m", openvtname);
-    return 1;
-  }
-
-  close(console);
-
-  if(ioctl(openvt, VT_ACTIVATE, openvtnum)<0) {
-    seteuid(uid);
-    syslog(LOG_ERR, "VT_ACTIVATE(%d): %m", openvtnum);
-    return 1;
-  }
-
-  while(ioctl(openvt, VT_WAITACTIVE, openvtnum)<0) {
-    if(errno!=EINTR) {
-      ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-      seteuid(uid);
-      syslog(LOG_ERR, "VT_WAITACTIVE(%d): %m", openvtnum);
-      return 1;
-    }
-  }
-
-  seteuid(uid);
-  fp=fdopen(openvt, "r+");
-  if(!fp) {
-    seteuid(0);
-    ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-    seteuid(uid);
-    syslog(LOG_ERR, "fdopen(%s): %m", openvtname);
-    return 1;
-  }
-
-  if(tcgetattr(openvt, &t)<0) {
-    seteuid(0);
-    ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-    seteuid(uid);
-    syslog(LOG_ERR, "tcgetattr(%s): %m", openvtname);
-    return 1;
-  }
-  t.c_lflag &= ~ECHO;
-  if(tcsetattr(openvt, TCSANOW, &t)<0) {
-    seteuid(0);
-    ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-    seteuid(uid);
-    syslog(LOG_ERR, "tcsetattr(%s): %m", openvtname);
-    return 1;
-  }
-
-  if(fprintf(fp, "\033[2J\033[H")<0) {
-    seteuid(0);
-    ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-    seteuid(uid);
-    syslog(LOG_ERR, "write error on %s: %m", openvtname);
-    return 1;
-  }
-  if(argv[1][0] && argv[2][0]) {
-    if(fprintf(fp, "Password for PPP client %s on server %s: ", argv[1], argv[2])<0) {
-      seteuid(0);
-      ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-      seteuid(uid);
-      syslog(LOG_ERR, "write error on %s: %m", openvtname);
-      return 1;
-    }
-  } else if(argv[1][0] && !argv[2][0]) {
-    if(fprintf(fp, "Password for PPP client %s: ", argv[1])<0) {
-      syslog(LOG_ERR, "write error on %s: %m", openvtname);
-      seteuid(0);
-      ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-      seteuid(uid);
-      return 1;
-    }
-  } else if(!argv[1][0] && argv[2][0]) {
-    if(fprintf(fp, "Password for PPP on server %s: ", argv[2])<0) {
-      seteuid(0);
-      ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-      seteuid(uid);
-      syslog(LOG_ERR, "write error on %s: %m", openvtname);
-      return 1;
-    }
-  } else {
-    if(fprintf(fp, "Enter PPP password: ")<0) {
-      seteuid(0);
-      ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-      seteuid(uid);
-      syslog(LOG_ERR, "write error on %s: %m", openvtname);
-      return 1;
-    }
-  }
-
-  if(!fgets(pass, sizeof pass, fp)) {
-    seteuid(0);
-    ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-    seteuid(uid);
-    if(ferror(fp)) {
-      syslog(LOG_ERR, "read error on %s: %m", openvtname);
-    }
-    return 1;
-  }
-  if((nl=strchr(pass, '\n'))) 
-    *nl=0;
-  passlen=strlen(pass);
-  
-  outfd=atoi(argv[3]);
-  if((wrote=write(outfd, pass, passlen))!=passlen) {
-    seteuid(0);
-    ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-    seteuid(uid);
-    if(wrote<0)
-      syslog(LOG_ERR, "write error on outpipe: %m");
-    else
-      syslog(LOG_ERR, "short write on outpipe");
-    return 1;
-  }
-
-  seteuid(0);
-  ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-  seteuid(uid);
-  return 0;
-}
-
-static int console_owner(uid_t uid, int cons)
-{
-  char name[256];
-  struct stat st;
-  snprintf(name, sizeof name, "/dev/tty%d", cons);
-  if(stat(name, &st)<0) {
-    if(errno!=ENOENT)
-      syslog(LOG_ERR, "stat(%s): %m", name);
-    return 0;
-  }
-  return uid==st.st_uid;
-}
diff --git a/mdk-stage1/ppp/etc.ppp/chap-secrets b/mdk-stage1/ppp/etc.ppp/chap-secrets
deleted file mode 100644
index 7d1c3cd7c..000000000
--- a/mdk-stage1/ppp/etc.ppp/chap-secrets
+++ /dev/null
@@ -1,2 +0,0 @@
-# Secrets for authentication using CHAP
-# client	server	secret			IP addresses
diff --git a/mdk-stage1/ppp/etc.ppp/options b/mdk-stage1/ppp/etc.ppp/options
deleted file mode 100644
index 0f77a9aa0..000000000
--- a/mdk-stage1/ppp/etc.ppp/options
+++ /dev/null
@@ -1,5 +0,0 @@
-lock
-noauth
-noipdefault
-usepeerdns
-
diff --git a/mdk-stage1/ppp/etc.ppp/options.options b/mdk-stage1/ppp/etc.ppp/options.options
deleted file mode 100644
index 4b67b6a0d..000000000
--- a/mdk-stage1/ppp/etc.ppp/options.options
+++ /dev/null
@@ -1 +0,0 @@
-lock
diff --git a/mdk-stage1/ppp/etc.ppp/pap-secrets b/mdk-stage1/ppp/etc.ppp/pap-secrets
deleted file mode 100644
index f8b7dce3c..000000000
--- a/mdk-stage1/ppp/etc.ppp/pap-secrets
+++ /dev/null
@@ -1,2 +0,0 @@
-# Secrets for authentication using PAP
-# client	server	secret			IP addresses
diff --git a/mdk-stage1/ppp/include/linux/if_ppp.h b/mdk-stage1/ppp/include/linux/if_ppp.h
deleted file mode 100644
index 1febf0931..000000000
--- a/mdk-stage1/ppp/include/linux/if_ppp.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*	$Id$	*/
-
-/*
- * if_ppp.h - Point-to-Point Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- */
-
-/*
- *  ==FILEVERSION 20000724==
- *
- *  NOTE TO MAINTAINERS:
- *     If you modify this file at all, please set the above date.
- *     if_ppp.h is shipped with a PPP distribution as well as with the kernel;
- *     if everyone increases the FILEVERSION number above, then scripts
- *     can do the right thing when deciding whether to install a new if_ppp.h
- *     file.  Don't change the format of that line otherwise, so the
- *     installation script can recognize it.
- */
-
-#ifndef _IF_PPP_H_
-#define _IF_PPP_H_
-
-/*
- * Packet sizes
- */
-
-#define	PPP_MTU		1500	/* Default MTU (size of Info field) */
-#define PPP_MAXMRU	65000	/* Largest MRU we allow */
-#define PROTO_IPX	0x002b	/* protocol numbers */
-#define PROTO_DNA_RT    0x0027  /* DNA Routing */
-
-
-/*
- * Bit definitions for flags.
- */
-
-#define SC_COMP_PROT	0x00000001	/* protocol compression (output) */
-#define SC_COMP_AC	0x00000002	/* header compression (output) */
-#define	SC_COMP_TCP	0x00000004	/* TCP (VJ) compression (output) */
-#define SC_NO_TCP_CCID	0x00000008	/* disable VJ connection-id comp. */
-#define SC_REJ_COMP_AC	0x00000010	/* reject adrs/ctrl comp. on input */
-#define SC_REJ_COMP_TCP	0x00000020	/* reject TCP (VJ) comp. on input */
-#define SC_CCP_OPEN	0x00000040	/* Look at CCP packets */
-#define SC_CCP_UP	0x00000080	/* May send/recv compressed packets */
-#define SC_ENABLE_IP	0x00000100	/* IP packets may be exchanged */
-#define SC_LOOP_TRAFFIC	0x00000200	/* send traffic to pppd */
-#define SC_MULTILINK	0x00000400	/* do multilink encapsulation */
-#define SC_MP_SHORTSEQ	0x00000800	/* use short MP sequence numbers */
-#define SC_COMP_RUN	0x00001000	/* compressor has been inited */
-#define SC_DECOMP_RUN	0x00002000	/* decompressor has been inited */
-#define SC_MP_XSHORTSEQ	0x00004000	/* transmit short MP seq numbers */
-#define SC_DEBUG	0x00010000	/* enable debug messages */
-#define SC_LOG_INPKT	0x00020000	/* log contents of good pkts recvd */
-#define SC_LOG_OUTPKT	0x00040000	/* log contents of pkts sent */
-#define SC_LOG_RAWIN	0x00080000	/* log all chars received */
-#define SC_LOG_FLUSH	0x00100000	/* log all chars flushed */
-#define	SC_SYNC		0x00200000	/* synchronous serial mode */
-#define	SC_MASK		0x0f200fff	/* bits that user can change */
-
-/* state bits */
-#define SC_XMIT_BUSY	0x10000000	/* (used by isdn_ppp?) */
-#define SC_RCV_ODDP	0x08000000	/* have rcvd char with odd parity */
-#define SC_RCV_EVNP	0x04000000	/* have rcvd char with even parity */
-#define SC_RCV_B7_1	0x02000000	/* have rcvd char with bit 7 = 1 */
-#define SC_RCV_B7_0	0x01000000	/* have rcvd char with bit 7 = 0 */
-#define SC_DC_FERROR	0x00800000	/* fatal decomp error detected */
-#define SC_DC_ERROR	0x00400000	/* non-fatal decomp error detected */
-
-/*
- * Ioctl definitions.
- */
-
-struct npioctl {
-	int		protocol;	/* PPP protocol, e.g. PPP_IP */
-	enum NPmode	mode;
-};
-
-/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */
-struct ppp_option_data {
-	__u8	*ptr;
-	__u32	length;
-	int	transmit;
-};
-
-struct ifpppstatsreq {
-	struct ifreq	 b;
-	struct ppp_stats stats;			/* statistic information */
-};
-
-struct ifpppcstatsreq {
-	struct ifreq	      b;
-	struct ppp_comp_stats stats;
-};
-
-#define ifr__name       b.ifr_ifrn.ifrn_name
-#define stats_ptr       b.ifr_ifru.ifru_data
-
-/*
- * Ioctl definitions.
- */
-
-#define	PPPIOCGFLAGS	_IOR('t', 90, int)	/* get configuration flags */
-#define	PPPIOCSFLAGS	_IOW('t', 89, int)	/* set configuration flags */
-#define	PPPIOCGASYNCMAP	_IOR('t', 88, int)	/* get async map */
-#define	PPPIOCSASYNCMAP	_IOW('t', 87, int)	/* set async map */
-#define	PPPIOCGUNIT	_IOR('t', 86, int)	/* get ppp unit number */
-#define	PPPIOCGRASYNCMAP _IOR('t', 85, int)	/* get receive async map */
-#define	PPPIOCSRASYNCMAP _IOW('t', 84, int)	/* set receive async map */
-#define	PPPIOCGMRU	_IOR('t', 83, int)	/* get max receive unit */
-#define	PPPIOCSMRU	_IOW('t', 82, int)	/* set max receive unit */
-#define	PPPIOCSMAXCID	_IOW('t', 81, int)	/* set VJ max slot ID */
-#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */
-#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */
-#define PPPIOCXFERUNIT	_IO('t', 78)		/* transfer PPP unit */
-#define PPPIOCSCOMPRESS	_IOW('t', 77, struct ppp_option_data)
-#define PPPIOCGNPMODE	_IOWR('t', 76, struct npioctl) /* get NP mode */
-#define PPPIOCSNPMODE	_IOW('t', 75, struct npioctl)  /* set NP mode */
-#define PPPIOCSPASS	_IOW('t', 71, struct sock_fprog) /* set pass filter */
-#define PPPIOCSACTIVE	_IOW('t', 70, struct sock_fprog) /* set active filt */
-#define PPPIOCGDEBUG	_IOR('t', 65, int)	/* Read debug level */
-#define PPPIOCSDEBUG	_IOW('t', 64, int)	/* Set debug level */
-#define PPPIOCGIDLE	_IOR('t', 63, struct ppp_idle) /* get idle time */
-#define PPPIOCNEWUNIT	_IOWR('t', 62, int)	/* create new ppp unit */
-#define PPPIOCATTACH	_IOW('t', 61, int)	/* attach to ppp unit */
-#define PPPIOCDETACH	_IOW('t', 60, int)	/* detach from ppp unit/chan */
-#define PPPIOCSMRRU	_IOW('t', 59, int)	/* set multilink MRU */
-#define PPPIOCCONNECT	_IOW('t', 58, int)	/* connect channel to unit */
-#define PPPIOCDISCONN	_IO('t', 57)		/* disconnect channel */
-#define PPPIOCATTCHAN	_IOW('t', 56, int)	/* attach to ppp channel */
-#define PPPIOCGCHAN	_IOR('t', 55, int)	/* get ppp channel number */
-
-#define SIOCGPPPSTATS   (SIOCDEVPRIVATE + 0)
-#define SIOCGPPPVER     (SIOCDEVPRIVATE + 1)	/* NEVER change this!! */
-#define SIOCGPPPCSTATS  (SIOCDEVPRIVATE + 2)
-
-#if !defined(ifr_mtu)
-#define ifr_mtu	ifr_ifru.ifru_metric
-#endif
-
-#endif /* _IF_PPP_H_ */
diff --git a/mdk-stage1/ppp/include/linux/if_pppvar.h b/mdk-stage1/ppp/include/linux/if_pppvar.h
deleted file mode 100644
index b2485cd9d..000000000
--- a/mdk-stage1/ppp/include/linux/if_pppvar.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*	From: if_pppvar.h,v 1.2 1995/06/12 11:36:51 paulus Exp */
-/*
- * if_pppvar.h - private structures and declarations for PPP.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
- *  ==FILEVERSION 990911==
- *
- *  NOTE TO MAINTAINERS:
- *   If you modify this file at all, please set the above date.
- *   if_pppvar.h is shipped with a PPP distribution as well as with the kernel;
- *   if everyone increases the FILEVERSION number above, then scripts
- *   can do the right thing when deciding whether to install a new if_pppvar.h
- *   file.  Don't change the format of that line otherwise, so the
- *   installation script can recognize it.
- */
-
-/*
- * Supported network protocols.  These values are used for
- * indexing sc_npmode.
- */
-
-#define NP_IP	0		/* Internet Protocol */
-#define NP_IPX	1		/* IPX protocol */
-#define NP_AT	2		/* Appletalk protocol */
-#define NP_IPV6	3		/* Internet Protocol */
-#define NUM_NP	4		/* Number of NPs. */
-
-#define OBUFSIZE	256	/* # chars of output buffering */
-
-/*
- * Structure describing each ppp unit.
- */
-
-struct ppp {
-	int		magic;		/* magic value for structure	*/
-	struct ppp	*next;		/* unit with next index		*/
-	unsigned long	inuse;		/* are we allocated?		*/
-	int		line;		/* network interface unit #	*/
-	__u32		flags;		/* miscellaneous control flags	*/
-	int		mtu;		/* maximum xmit frame size	*/
-	int		mru;		/* maximum receive frame size	*/
-	struct slcompress *slcomp;	/* for TCP header compression	*/
-	struct sk_buff_head xmt_q;	/* frames to send from pppd	*/
-	struct sk_buff_head rcv_q;	/* frames for pppd to read	*/
-	unsigned long	xmit_busy;	/* bit 0 set when xmitter busy  */
-
-	/* Information specific to using ppp on async serial lines. */
-	struct tty_struct *tty;		/* ptr to TTY structure	*/
-	struct tty_struct *backup_tty;	/* TTY to use if tty gets closed */
-	__u8		escape;		/* 0x20 if prev char was PPP_ESC */
-	__u8		toss;		/* toss this frame		*/
-	volatile __u8	tty_pushing;	/* internal state flag		*/
-	volatile __u8	woke_up;	/* internal state flag		*/
-	__u32		xmit_async_map[8]; /* 1 bit means that given control 
-					   character is quoted on output*/
-	__u32		recv_async_map; /* 1 bit means that given control 
-					   character is ignored on input*/
-	__u32		bytes_sent;	/* Bytes sent on frame	*/
-	__u32		bytes_rcvd;	/* Bytes recvd on frame	*/
-
-	/* Async transmission information */
-	struct sk_buff	*tpkt;		/* frame currently being sent	*/
-	int		tpkt_pos;	/* how much of it we've done	*/
-	__u16		tfcs;		/* FCS so far for it		*/
-	unsigned char	*optr;		/* where we're up to in sending */
-	unsigned char	*olim;		/* points past last valid char	*/
-
-	/* Async reception information */
-	struct sk_buff	*rpkt;		/* frame currently being rcvd	*/
-	__u16		rfcs;		/* FCS so far of rpkt		*/
-
-	/* Queues for select() functionality */
-	struct wait_queue *read_wait;	/* queue for reading processes	*/
-
-	/* info for detecting idle channels */
-	unsigned long	last_xmit;	/* time of last transmission	*/
-	unsigned long	last_recv;	/* time last packet received    */
-
-	/* Statistic information */
-	struct pppstat	stats;		/* statistic information	*/
-
-	/* PPP compression protocol information */
-	struct	compressor *sc_xcomp;	/* transmit compressor */
-	void	*sc_xc_state;		/* transmit compressor state */
-	struct	compressor *sc_rcomp;	/* receive decompressor */
-	void	*sc_rc_state;		/* receive decompressor state */
-
-	enum	NPmode sc_npmode[NUM_NP]; /* what to do with each NP */
-	int	 sc_xfer;		/* PID of reserved PPP table */
-	char	name[8];		/* space for unit name */
-	struct device	dev;		/* net device structure */
-	struct enet_statistics estats;	/* more detailed stats */
-
-	/* tty output buffer */
-	unsigned char	obuf[OBUFSIZE];	/* buffer for characters to send */
-};
-
-#define PPP_MAGIC	0x5002
-#define PPP_VERSION	"2.3.11"
diff --git a/mdk-stage1/ppp/include/linux/ppp-comp.h b/mdk-stage1/ppp/include/linux/ppp-comp.h
deleted file mode 100644
index 3184d0731..000000000
--- a/mdk-stage1/ppp/include/linux/ppp-comp.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * ppp-comp.h - Definitions for doing PPP packet compression.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- *  ==FILEVERSION 980319==
- *
- *  NOTE TO MAINTAINERS:
- *     If you modify this file at all, please set the above date.
- *     ppp-comp.h is shipped with a PPP distribution as well as with the kernel;
- *     if everyone increases the FILEVERSION number above, then scripts
- *     can do the right thing when deciding whether to install a new ppp-comp.h
- *     file.  Don't change the format of that line otherwise, so the
- *     installation script can recognize it.
- */
-
-#ifndef _NET_PPP_COMP_H
-#define _NET_PPP_COMP_H
-
-/*
- * The following symbols control whether we include code for
- * various compression methods.
- */
-
-#ifndef DO_BSD_COMPRESS
-#define DO_BSD_COMPRESS	1	/* by default, include BSD-Compress */
-#endif
-#ifndef DO_DEFLATE
-#define DO_DEFLATE	1	/* by default, include Deflate */
-#endif
-#define DO_PREDICTOR_1	0
-#define DO_PREDICTOR_2	0
-
-/*
- * Structure giving methods for compression/decompression.
- */
-
-struct compressor {
-	int	compress_proto;	/* CCP compression protocol number */
-
-	/* Allocate space for a compressor (transmit side) */
-	void	*(*comp_alloc) (unsigned char *options, int opt_len);
-
-	/* Free space used by a compressor */
-	void	(*comp_free) (void *state);
-
-	/* Initialize a compressor */
-	int	(*comp_init) (void *state, unsigned char *options,
-			      int opt_len, int unit, int opthdr, int debug);
-
-	/* Reset a compressor */
-	void	(*comp_reset) (void *state);
-
-	/* Compress a packet */
-	int     (*compress) (void *state, unsigned char *rptr,
-			      unsigned char *obuf, int isize, int osize);
-
-	/* Return compression statistics */
-	void	(*comp_stat) (void *state, struct compstat *stats);
-
-	/* Allocate space for a decompressor (receive side) */
-	void	*(*decomp_alloc) (unsigned char *options, int opt_len);
-
-	/* Free space used by a decompressor */
-	void	(*decomp_free) (void *state);
-
-	/* Initialize a decompressor */
-	int	(*decomp_init) (void *state, unsigned char *options,
-				int opt_len, int unit, int opthdr, int mru,
-				int debug);
-
-	/* Reset a decompressor */
-	void	(*decomp_reset) (void *state);
-
-	/* Decompress a packet. */
-	int	(*decompress) (void *state, unsigned char *ibuf, int isize,
-				unsigned char *obuf, int osize);
-
-	/* Update state for an incompressible packet received */
-	void	(*incomp) (void *state, unsigned char *ibuf, int icnt);
-
-	/* Return decompression statistics */
-	void	(*decomp_stat) (void *state, struct compstat *stats);
-};
-
-/*
- * The return value from decompress routine is the length of the
- * decompressed packet if successful, otherwise DECOMP_ERROR
- * or DECOMP_FATALERROR if an error occurred.
- * 
- * We need to make this distinction so that we can disable certain
- * useful functionality, namely sending a CCP reset-request as a result
- * of an error detected after decompression.  This is to avoid infringing
- * a patent held by Motorola.
- * Don't you just lurve software patents.
- */
-
-#define DECOMP_ERROR		-1	/* error detected before decomp. */
-#define DECOMP_FATALERROR	-2	/* error detected after decomp. */
-
-/*
- * CCP codes.
- */
-
-#define CCP_CONFREQ	1
-#define CCP_CONFACK	2
-#define CCP_TERMREQ	5
-#define CCP_TERMACK	6
-#define CCP_RESETREQ	14
-#define CCP_RESETACK	15
-
-/*
- * Max # bytes for a CCP option
- */
-
-#define CCP_MAX_OPTION_LENGTH	32
-
-/*
- * Parts of a CCP packet.
- */
-
-#define CCP_CODE(dp)		((dp)[0])
-#define CCP_ID(dp)		((dp)[1])
-#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN		4
-
-#define CCP_OPT_CODE(dp)	((dp)[0])
-#define CCP_OPT_LENGTH(dp)	((dp)[1])
-#define CCP_OPT_MINLEN		2
-
-/*
- * Definitions for BSD-Compress.
- */
-
-#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS	3	/* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
-#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
-#define BSD_CURRENT_VERSION	1		/* current version number */
-#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
-
-#define BSD_MIN_BITS		9	/* smallest code size supported */
-#define BSD_MAX_BITS		15	/* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-
-#define CI_DEFLATE		26	/* config option for Deflate */
-#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
-#define CILEN_DEFLATE		4	/* length of its config option */
-
-#define DEFLATE_MIN_SIZE	8
-#define DEFLATE_MAX_SIZE	15
-#define DEFLATE_METHOD_VAL	8
-#define DEFLATE_SIZE(x)		(((x) >> 4) + DEFLATE_MIN_SIZE)
-#define DEFLATE_METHOD(x)	((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w)	((((w) - DEFLATE_MIN_SIZE) << 4) \
-				 + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE	0
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-
-#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1	2	/* length of its config option */
-#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2	2	/* length of its config option */
-
-#ifdef __KERNEL__
-extern int ppp_register_compressor(struct compressor *);
-extern void ppp_unregister_compressor(struct compressor *);
-#endif /* __KERNEL__ */
-
-#endif /* _NET_PPP_COMP_H */
diff --git a/mdk-stage1/ppp/include/linux/ppp_defs.h b/mdk-stage1/ppp/include/linux/ppp_defs.h
deleted file mode 100644
index 46946fbdc..000000000
--- a/mdk-stage1/ppp/include/linux/ppp_defs.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/*	$Id$	*/
-
-/*
- * ppp_defs.h - PPP definitions.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- */
-
-/*
- *  ==FILEVERSION 20000114==
- *
- *  NOTE TO MAINTAINERS:
- *     If you modify this file at all, please set the above date.
- *     ppp_defs.h is shipped with a PPP distribution as well as with the kernel;
- *     if everyone increases the FILEVERSION number above, then scripts
- *     can do the right thing when deciding whether to install a new ppp_defs.h
- *     file.  Don't change the format of that line otherwise, so the
- *     installation script can recognize it.
- */
-
-#ifndef _PPP_DEFS_H_
-#define _PPP_DEFS_H_
-
-/*
- * The basic PPP frame.
- */
-#define PPP_HDRLEN	4	/* octets for standard ppp header */
-#define PPP_FCSLEN	2	/* octets for FCS */
-#define PPP_MRU		1500	/* default MRU = max length of info field */
-
-#define PPP_ADDRESS(p)	(((__u8 *)(p))[0])
-#define PPP_CONTROL(p)	(((__u8 *)(p))[1])
-#define PPP_PROTOCOL(p)	((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3])
-
-/*
- * Significant octet values.
- */
-#define	PPP_ALLSTATIONS	0xff	/* All-Stations broadcast address */
-#define	PPP_UI		0x03	/* Unnumbered Information */
-#define	PPP_FLAG	0x7e	/* Flag Sequence */
-#define	PPP_ESCAPE	0x7d	/* Asynchronous Control Escape */
-#define	PPP_TRANS	0x20	/* Asynchronous transparency modifier */
-
-/*
- * Protocol field values.
- */
-#define PPP_IP		0x21	/* Internet Protocol */
-#define PPP_AT		0x29	/* AppleTalk Protocol */
-#define PPP_IPX		0x2b	/* IPX protocol */
-#define	PPP_VJC_COMP	0x2d	/* VJ compressed TCP */
-#define	PPP_VJC_UNCOMP	0x2f	/* VJ uncompressed TCP */
-#define PPP_MP		0x3d	/* Multilink protocol */
-#define PPP_IPV6	0x57	/* Internet Protocol Version 6 */
-#define PPP_COMPFRAG	0xfb	/* fragment compressed below bundle */
-#define PPP_COMP	0xfd	/* compressed packet */
-#define PPP_IPCP	0x8021	/* IP Control Protocol */
-#define PPP_ATCP	0x8029	/* AppleTalk Control Protocol */
-#define PPP_IPXCP	0x802b	/* IPX Control Protocol */
-#define PPP_IPV6CP	0x8057	/* IPv6 Control Protocol */
-#define PPP_CCPFRAG	0x80fb	/* CCP at link level (below MP bundle) */
-#define PPP_CCP		0x80fd	/* Compression Control Protocol */
-#define PPP_LCP		0xc021	/* Link Control Protocol */
-#define PPP_PAP		0xc023	/* Password Authentication Protocol */
-#define PPP_LQR		0xc025	/* Link Quality Report protocol */
-#define PPP_CHAP	0xc223	/* Cryptographic Handshake Auth. Protocol */
-#define PPP_CBCP	0xc029	/* Callback Control Protocol */
-
-/*
- * Values for FCS calculations.
- */
-
-#define PPP_INITFCS	0xffff	/* Initial FCS value */
-#define PPP_GOODFCS	0xf0b8	/* Good final FCS value */
-#define PPP_FCS(fcs, c)	(((fcs) >> 8) ^ fcstab[((fcs) ^ (c)) & 0xff])
-
-/*
- * Extended asyncmap - allows any character to be escaped.
- */
-
-typedef __u32		ext_accm[8];
-
-/*
- * What to do with network protocol (NP) packets.
- */
-enum NPmode {
-    NPMODE_PASS,		/* pass the packet through */
-    NPMODE_DROP,		/* silently drop the packet */
-    NPMODE_ERROR,		/* return an error */
-    NPMODE_QUEUE		/* save it up for later. */
-};
-
-/*
- * Statistics for LQRP and pppstats
- */
-struct pppstat	{
-    __u32	ppp_discards;	/* # frames discarded */
-
-    __u32	ppp_ibytes;	/* bytes received */
-    __u32	ppp_ioctects;	/* bytes received not in error */
-    __u32	ppp_ipackets;	/* packets received */
-    __u32	ppp_ierrors;	/* receive errors */
-    __u32	ppp_ilqrs;	/* # LQR frames received */
-
-    __u32	ppp_obytes;	/* raw bytes sent */
-    __u32	ppp_ooctects;	/* frame bytes sent */
-    __u32	ppp_opackets;	/* packets sent */
-    __u32	ppp_oerrors;	/* transmit errors */ 
-    __u32	ppp_olqrs;	/* # LQR frames sent */
-};
-
-struct vjstat {
-    __u32	vjs_packets;	/* outbound packets */
-    __u32	vjs_compressed;	/* outbound compressed packets */
-    __u32	vjs_searches;	/* searches for connection state */
-    __u32	vjs_misses;	/* times couldn't find conn. state */
-    __u32	vjs_uncompressedin; /* inbound uncompressed packets */
-    __u32	vjs_compressedin;   /* inbound compressed packets */
-    __u32	vjs_errorin;	/* inbound unknown type packets */
-    __u32	vjs_tossed;	/* inbound packets tossed because of error */
-};
-
-struct compstat {
-    __u32	unc_bytes;	/* total uncompressed bytes */
-    __u32	unc_packets;	/* total uncompressed packets */
-    __u32	comp_bytes;	/* compressed bytes */
-    __u32	comp_packets;	/* compressed packets */
-    __u32	inc_bytes;	/* incompressible bytes */
-    __u32	inc_packets;	/* incompressible packets */
-
-    /* the compression ratio is defined as in_count / bytes_out */
-    __u32       in_count;	/* Bytes received */
-    __u32       bytes_out;	/* Bytes transmitted */
-
-    double	ratio;		/* not computed in kernel. */
-};
-
-struct ppp_stats {
-    struct pppstat	p;	/* basic PPP statistics */
-    struct vjstat	vj;	/* VJ header compression statistics */
-};
-
-struct ppp_comp_stats {
-    struct compstat	c;	/* packet compression statistics */
-    struct compstat	d;	/* packet decompression statistics */
-};
-
-/*
- * The following structure records the time in seconds since
- * the last NP packet was sent or received.
- */
-struct ppp_idle {
-    time_t xmit_idle;		/* time since last NP packet sent */
-    time_t recv_idle;		/* time since last NP packet received */
-};
-
-#ifndef __P
-#ifdef __STDC__
-#define __P(x)	x
-#else
-#define __P(x)	()
-#endif
-#endif
-
-#endif /* _PPP_DEFS_H_ */
diff --git a/mdk-stage1/ppp/include/net/if_ppp.h b/mdk-stage1/ppp/include/net/if_ppp.h
deleted file mode 100644
index 1527ecf3f..000000000
--- a/mdk-stage1/ppp/include/net/if_ppp.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*	$Id$	*/
-
-/*
- * if_ppp.h - Point-to-Point Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _IF_PPP_H_
-#define _IF_PPP_H_
-
-/*
- * Bit definitions for flags.
- */
-#define SC_COMP_PROT	0x00000001	/* protocol compression (output) */
-#define SC_COMP_AC	0x00000002	/* header compression (output) */
-#define	SC_COMP_TCP	0x00000004	/* TCP (VJ) compression (output) */
-#define SC_NO_TCP_CCID	0x00000008	/* disable VJ connection-id comp. */
-#define SC_REJ_COMP_AC	0x00000010	/* reject adrs/ctrl comp. on input */
-#define SC_REJ_COMP_TCP	0x00000020	/* reject TCP (VJ) comp. on input */
-#define SC_CCP_OPEN	0x00000040	/* Look at CCP packets */
-#define SC_CCP_UP	0x00000080	/* May send/recv compressed packets */
-#define SC_DEBUG	0x00010000	/* enable debug messages */
-#define SC_LOG_INPKT	0x00020000	/* log contents of good pkts recvd */
-#define SC_LOG_OUTPKT	0x00040000	/* log contents of pkts sent */
-#define SC_LOG_RAWIN	0x00080000	/* log all chars received */
-#define SC_LOG_FLUSH	0x00100000	/* log all chars flushed */
-#define SC_RCV_B7_0	0x01000000	/* have rcvd char with bit 7 = 0 */
-#define SC_RCV_B7_1	0x02000000	/* have rcvd char with bit 7 = 1 */
-#define SC_RCV_EVNP	0x04000000	/* have rcvd char with even parity */
-#define SC_RCV_ODDP	0x08000000	/* have rcvd char with odd parity */
-#define SC_SYNC		0x00200000	/* use synchronous HDLC framing */
-#define	SC_MASK		0x0fff00ff	/* bits that user can change */
-
-/*
- * State bits in sc_flags, not changeable by user.
- */
-#define SC_TIMEOUT	0x00000400	/* timeout is currently pending */
-#define SC_VJ_RESET	0x00000800	/* need to reset VJ decomp */
-#define SC_COMP_RUN	0x00001000	/* compressor has been inited */
-#define SC_DECOMP_RUN	0x00002000	/* decompressor has been inited */
-#define SC_DC_ERROR	0x00004000	/* non-fatal decomp error detected */
-#define SC_DC_FERROR	0x00008000	/* fatal decomp error detected */
-#define SC_TBUSY	0x10000000	/* xmitter doesn't need a packet yet */
-#define SC_PKTLOST	0x20000000	/* have lost or dropped a packet */
-#define	SC_FLUSH	0x40000000	/* flush input until next PPP_FLAG */
-#define	SC_ESCAPED	0x80000000	/* saw a PPP_ESCAPE */
-
-/*
- * Ioctl definitions.
- */
-
-struct npioctl {
-    int		protocol;	/* PPP procotol, e.g. PPP_IP */
-    enum NPmode	mode;
-};
-
-/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */
-struct ppp_option_data {
-	u_char	*ptr;
-	u_int	length;
-	int	transmit;
-};
-
-struct ifpppstatsreq {
-    char ifr_name[IFNAMSIZ];
-    struct ppp_stats stats;
-};
-
-struct ifpppcstatsreq {
-    char ifr_name[IFNAMSIZ];
-    struct ppp_comp_stats stats;
-};
-
-/*
- * Ioctl definitions.
- */
-
-#define	PPPIOCGFLAGS	_IOR('t', 90, int)	/* get configuration flags */
-#define	PPPIOCSFLAGS	_IOW('t', 89, int)	/* set configuration flags */
-#define	PPPIOCGASYNCMAP	_IOR('t', 88, int)	/* get async map */
-#define	PPPIOCSASYNCMAP	_IOW('t', 87, int)	/* set async map */
-#define	PPPIOCGUNIT	_IOR('t', 86, int)	/* get ppp unit number */
-#define	PPPIOCGRASYNCMAP _IOR('t', 85, int)	/* get receive async map */
-#define	PPPIOCSRASYNCMAP _IOW('t', 84, int)	/* set receive async map */
-#define	PPPIOCGMRU	_IOR('t', 83, int)	/* get max receive unit */
-#define	PPPIOCSMRU	_IOW('t', 82, int)	/* set max receive unit */
-#define	PPPIOCSMAXCID	_IOW('t', 81, int)	/* set VJ max slot ID */
-#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */
-#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */
-#define PPPIOCXFERUNIT	_IO('t', 78)		/* transfer PPP unit */
-#define PPPIOCSCOMPRESS	_IOW('t', 77, struct ppp_option_data)
-#define PPPIOCGNPMODE	_IOWR('t', 76, struct npioctl) /* get NP mode */
-#define PPPIOCSNPMODE	_IOW('t', 75, struct npioctl)  /* set NP mode */
-#define PPPIOCGIDLE	_IOR('t', 74, struct ppp_idle) /* get idle time */
-#ifdef PPP_FILTER
-#define PPPIOCSPASS	_IOW('t', 71, struct bpf_program) /* set pass filter */
-#define PPPIOCSACTIVE	_IOW('t', 70, struct bpf_program) /* set active filt */
-#endif /* PPP_FILTER */
-
-/* PPPIOC[GS]MTU are alternatives to SIOC[GS]IFMTU, used under Ultrix */
-#define PPPIOCGMTU	_IOR('t', 73, int)	/* get interface MTU */
-#define PPPIOCSMTU	_IOW('t', 72, int)	/* set interface MTU */
-
-/*
- * These two are interface ioctls so that pppstats can do them on
- * a socket without having to open the serial device.
- */
-#define SIOCGPPPSTATS	_IOWR('i', 123, struct ifpppstatsreq)
-#define SIOCGPPPCSTATS	_IOWR('i', 122, struct ifpppcstatsreq)
-
-#if !defined(ifr_mtu)
-#define ifr_mtu	ifr_ifru.ifru_metric
-#endif
-
-#if (defined(_KERNEL) || defined(KERNEL)) && !defined(NeXT)
-void pppattach __P((void));
-void pppintr __P((void));
-#endif
-#endif /* _IF_PPP_H_ */
diff --git a/mdk-stage1/ppp/include/net/ppp-comp.h b/mdk-stage1/ppp/include/net/ppp-comp.h
deleted file mode 100644
index 0e6a9c672..000000000
--- a/mdk-stage1/ppp/include/net/ppp-comp.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * ppp-comp.h - Definitions for doing PPP packet compression.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-#ifndef _NET_PPP_COMP_H
-#define _NET_PPP_COMP_H
-
-/*
- * The following symbols control whether we include code for
- * various compression methods.
- */
-#ifndef DO_BSD_COMPRESS
-#define DO_BSD_COMPRESS	1	/* by default, include BSD-Compress */
-#endif
-#ifndef DO_DEFLATE
-#define DO_DEFLATE	1	/* by default, include Deflate */
-#endif
-#define DO_PREDICTOR_1	0
-#define DO_PREDICTOR_2	0
-
-/*
- * Structure giving methods for compression/decompression.
- */
-#ifdef PACKETPTR
-struct compressor {
-	int	compress_proto;	/* CCP compression protocol number */
-
-	/* Allocate space for a compressor (transmit side) */
-	void	*(*comp_alloc) __P((u_char *options, int opt_len));
-	/* Free space used by a compressor */
-	void	(*comp_free) __P((void *state));
-	/* Initialize a compressor */
-	int	(*comp_init) __P((void *state, u_char *options, int opt_len,
-				  int unit, int hdrlen, int debug));
-	/* Reset a compressor */
-	void	(*comp_reset) __P((void *state));
-	/* Compress a packet */
-	int	(*compress) __P((void *state, PACKETPTR *mret,
-				 PACKETPTR mp, int orig_len, int max_len));
-	/* Return compression statistics */
-	void	(*comp_stat) __P((void *state, struct compstat *stats));
-
-	/* Allocate space for a decompressor (receive side) */
-	void	*(*decomp_alloc) __P((u_char *options, int opt_len));
-	/* Free space used by a decompressor */
-	void	(*decomp_free) __P((void *state));
-	/* Initialize a decompressor */
-	int	(*decomp_init) __P((void *state, u_char *options, int opt_len,
-				    int unit, int hdrlen, int mru, int debug));
-	/* Reset a decompressor */
-	void	(*decomp_reset) __P((void *state));
-	/* Decompress a packet. */
-	int	(*decompress) __P((void *state, PACKETPTR mp,
-				   PACKETPTR *dmpp));
-	/* Update state for an incompressible packet received */
-	void	(*incomp) __P((void *state, PACKETPTR mp));
-	/* Return decompression statistics */
-	void	(*decomp_stat) __P((void *state, struct compstat *stats));
-};
-#endif /* PACKETPTR */
-
-/*
- * Return values for decompress routine.
- * We need to make these distinctions so that we can disable certain
- * useful functionality, namely sending a CCP reset-request as a result
- * of an error detected after decompression.  This is to avoid infringing
- * a patent held by Motorola.
- * Don't you just lurve software patents.
- */
-#define DECOMP_OK		0	/* everything went OK */
-#define DECOMP_ERROR		1	/* error detected before decomp. */
-#define DECOMP_FATALERROR	2	/* error detected after decomp. */
-
-/*
- * CCP codes.
- */
-#define CCP_CONFREQ	1
-#define CCP_CONFACK	2
-#define CCP_TERMREQ	5
-#define CCP_TERMACK	6
-#define CCP_RESETREQ	14
-#define CCP_RESETACK	15
-
-/*
- * Max # bytes for a CCP option
- */
-#define CCP_MAX_OPTION_LENGTH	32
-
-/*
- * Parts of a CCP packet.
- */
-#define CCP_CODE(dp)		((dp)[0])
-#define CCP_ID(dp)		((dp)[1])
-#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN		4
-
-#define CCP_OPT_CODE(dp)	((dp)[0])
-#define CCP_OPT_LENGTH(dp)	((dp)[1])
-#define CCP_OPT_MINLEN		2
-
-/*
- * Definitions for BSD-Compress.
- */
-#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS	3	/* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
-#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
-#define BSD_CURRENT_VERSION	1		/* current version number */
-#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
-
-#define BSD_MIN_BITS		9	/* smallest code size supported */
-#define BSD_MAX_BITS		15	/* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-#define CI_DEFLATE		26	/* config option for Deflate */
-#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
-#define CILEN_DEFLATE		4	/* length of its config option */
-
-#define DEFLATE_MIN_SIZE	8
-#define DEFLATE_MAX_SIZE	15
-#define DEFLATE_METHOD_VAL	8
-#define DEFLATE_SIZE(x)		(((x) >> 4) + DEFLATE_MIN_SIZE)
-#define DEFLATE_METHOD(x)	((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w)	((((w) - DEFLATE_MIN_SIZE) << 4) \
-				 + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE	0
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1	2	/* length of its config option */
-#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2	2	/* length of its config option */
-
-#endif /* _NET_PPP_COMP_H */
diff --git a/mdk-stage1/ppp/include/net/ppp_defs.h b/mdk-stage1/ppp/include/net/ppp_defs.h
deleted file mode 100644
index c35020eab..000000000
--- a/mdk-stage1/ppp/include/net/ppp_defs.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*	$Id$	*/
-
-/*
- * ppp_defs.h - PPP definitions.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- */
-
-#ifndef _PPP_DEFS_H_
-#define _PPP_DEFS_H_
-
-/*
- * The basic PPP frame.
- */
-#define PPP_HDRLEN	4	/* octets for standard ppp header */
-#define PPP_FCSLEN	2	/* octets for FCS */
-
-/*
- * Packet sizes
- *
- * Note - lcp shouldn't be allowed to negotiate stuff outside these
- *	  limits.  See lcp.h in the pppd directory.
- * (XXX - these constants should simply be shared by lcp.c instead
- *	  of living in lcp.h)
- */
-#define	PPP_MTU		1500	/* Default MTU (size of Info field) */
-#define PPP_MAXMTU	65535 - (PPP_HDRLEN + PPP_FCSLEN)
-#define PPP_MINMTU	64
-#define PPP_MRU		1500	/* default MRU = max length of info field */
-#define PPP_MAXMRU	65000	/* Largest MRU we allow */
-#define PPP_MINMRU	128
-
-#define PPP_ADDRESS(p)	(((u_char *)(p))[0])
-#define PPP_CONTROL(p)	(((u_char *)(p))[1])
-#define PPP_PROTOCOL(p)	((((u_char *)(p))[2] << 8) + ((u_char *)(p))[3])
-
-/*
- * Significant octet values.
- */
-#define	PPP_ALLSTATIONS	0xff	/* All-Stations broadcast address */
-#define	PPP_UI		0x03	/* Unnumbered Information */
-#define	PPP_FLAG	0x7e	/* Flag Sequence */
-#define	PPP_ESCAPE	0x7d	/* Asynchronous Control Escape */
-#define	PPP_TRANS	0x20	/* Asynchronous transparency modifier */
-
-/*
- * Protocol field values.
- */
-#define PPP_IP		0x21	/* Internet Protocol */
-#define PPP_AT		0x29	/* AppleTalk Protocol */
-#define PPP_IPX		0x2b	/* IPX protocol */
-#define	PPP_VJC_COMP	0x2d	/* VJ compressed TCP */
-#define	PPP_VJC_UNCOMP	0x2f	/* VJ uncompressed TCP */
-#define PPP_IPV6	0x57	/* Internet Protocol Version 6 */
-#define PPP_COMP	0xfd	/* compressed packet */
-#define PPP_IPCP	0x8021	/* IP Control Protocol */
-#define PPP_ATCP	0x8029	/* AppleTalk Control Protocol */
-#define PPP_IPXCP	0x802b	/* IPX Control Protocol */
-#define PPP_IPV6CP	0x8057	/* IPv6 Control Protocol */
-#define PPP_CCP		0x80fd	/* Compression Control Protocol */
-#define PPP_LCP		0xc021	/* Link Control Protocol */
-#define PPP_PAP		0xc023	/* Password Authentication Protocol */
-#define PPP_LQR		0xc025	/* Link Quality Report protocol */
-#define PPP_CHAP	0xc223	/* Cryptographic Handshake Auth. Protocol */
-#define PPP_CBCP	0xc029	/* Callback Control Protocol */
-
-/*
- * Values for FCS calculations.
- */
-#define PPP_INITFCS	0xffff	/* Initial FCS value */
-#define PPP_GOODFCS	0xf0b8	/* Good final FCS value */
-#define PPP_FCS(fcs, c)	(((fcs) >> 8) ^ fcstab[((fcs) ^ (c)) & 0xff])
-
-/*
- * A 32-bit unsigned integral type.
- */
-
-#if !defined(__BIT_TYPES_DEFINED__) && !defined(_BITYPES) \
- && !defined(__FreeBSD__) && (NS_TARGET < 40)
-#ifdef	UINT32_T
-typedef UINT32_T	u_int32_t;
-#else
-typedef unsigned int	u_int32_t;
-typedef unsigned short  u_int16_t;
-#endif
-#endif
-
-/*
- * Extended asyncmap - allows any character to be escaped.
- */
-typedef u_int32_t	ext_accm[8];
-
-/*
- * What to do with network protocol (NP) packets.
- */
-enum NPmode {
-    NPMODE_PASS,		/* pass the packet through */
-    NPMODE_DROP,		/* silently drop the packet */
-    NPMODE_ERROR,		/* return an error */
-    NPMODE_QUEUE		/* save it up for later. */
-};
-
-/*
- * Statistics.
- */
-struct pppstat	{
-    unsigned int ppp_ibytes;	/* bytes received */
-    unsigned int ppp_ipackets;	/* packets received */
-    unsigned int ppp_ierrors;	/* receive errors */
-    unsigned int ppp_obytes;	/* bytes sent */
-    unsigned int ppp_opackets;	/* packets sent */
-    unsigned int ppp_oerrors;	/* transmit errors */
-};
-
-struct vjstat {
-    unsigned int vjs_packets;	/* outbound packets */
-    unsigned int vjs_compressed; /* outbound compressed packets */
-    unsigned int vjs_searches;	/* searches for connection state */
-    unsigned int vjs_misses;	/* times couldn't find conn. state */
-    unsigned int vjs_uncompressedin; /* inbound uncompressed packets */
-    unsigned int vjs_compressedin; /* inbound compressed packets */
-    unsigned int vjs_errorin;	/* inbound unknown type packets */
-    unsigned int vjs_tossed;	/* inbound packets tossed because of error */
-};
-
-struct ppp_stats {
-    struct pppstat p;		/* basic PPP statistics */
-    struct vjstat vj;		/* VJ header compression statistics */
-};
-
-struct compstat {
-    unsigned int unc_bytes;	/* total uncompressed bytes */
-    unsigned int unc_packets;	/* total uncompressed packets */
-    unsigned int comp_bytes;	/* compressed bytes */
-    unsigned int comp_packets;	/* compressed packets */
-    unsigned int inc_bytes;	/* incompressible bytes */
-    unsigned int inc_packets;	/* incompressible packets */
-    unsigned int ratio;		/* recent compression ratio << 8 */
-};
-
-struct ppp_comp_stats {
-    struct compstat c;		/* packet compression statistics */
-    struct compstat d;		/* packet decompression statistics */
-};
-
-/*
- * The following structure records the time in seconds since
- * the last NP packet was sent or received.
- */
-struct ppp_idle {
-    time_t xmit_idle;		/* time since last NP packet sent */
-    time_t recv_idle;		/* time since last NP packet received */
-};
-
-#ifndef __P
-#ifdef __STDC__
-#define __P(x)	x
-#else
-#define __P(x)	()
-#endif
-#endif
-
-#endif /* _PPP_DEFS_H_ */
diff --git a/mdk-stage1/ppp/include/net/pppio.h b/mdk-stage1/ppp/include/net/pppio.h
deleted file mode 100644
index 9db1ca9ab..000000000
--- a/mdk-stage1/ppp/include/net/pppio.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * pppio.h - ioctl and other misc. definitions for STREAMS modules.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-#define _PPPIO(n)	(('p' << 8) + (n))
-
-#define PPPIO_NEWPPA	_PPPIO(130)	/* allocate a new PPP unit */
-#define PPPIO_GETSTAT	_PPPIO(131)	/* get PPP statistics */
-#define PPPIO_GETCSTAT	_PPPIO(132)	/* get PPP compression stats */
-#define PPPIO_MTU	_PPPIO(133)	/* set max transmission unit */
-#define PPPIO_MRU	_PPPIO(134)	/* set max receive unit */
-#define PPPIO_CFLAGS	_PPPIO(135)	/* set/clear/get compression flags */
-#define PPPIO_XCOMP	_PPPIO(136)	/* alloc transmit compressor */
-#define PPPIO_RCOMP	_PPPIO(137)	/* alloc receive decompressor */
-#define PPPIO_XACCM	_PPPIO(138)	/* set transmit asyncmap */
-#define PPPIO_RACCM	_PPPIO(139)	/* set receive asyncmap */
-#define PPPIO_VJINIT	_PPPIO(140)	/* initialize VJ comp/decomp */
-#define PPPIO_ATTACH	_PPPIO(141)	/* attach to a ppa (without putmsg) */
-#define PPPIO_LASTMOD	_PPPIO(142)	/* mark last ppp module */
-#define PPPIO_GCLEAN	_PPPIO(143)	/* get 8-bit-clean flags */
-#define PPPIO_DEBUG	_PPPIO(144)	/* request debug information */
-#define PPPIO_BIND	_PPPIO(145)	/* bind to SAP */
-#define PPPIO_NPMODE	_PPPIO(146)	/* set mode for handling data pkts */
-#define PPPIO_GIDLE	_PPPIO(147)	/* get time since last data pkt */
-#define PPPIO_PASSFILT	_PPPIO(148)	/* set filter for packets to pass */
-#define PPPIO_ACTIVEFILT _PPPIO(149)	/* set filter for "link active" pkts */
-
-/*
- * Values for PPPIO_CFLAGS
- */
-#define COMP_AC		0x1		/* compress address/control */
-#define DECOMP_AC	0x2		/* decompress address/control */
-#define COMP_PROT	0x4		/* compress PPP protocol */
-#define DECOMP_PROT	0x8		/* decompress PPP protocol */
-
-#define COMP_VJC	0x10		/* compress TCP/IP headers */
-#define COMP_VJCCID	0x20		/* compress connection ID as well */
-#define DECOMP_VJC	0x40		/* decompress TCP/IP headers */
-#define DECOMP_VJCCID	0x80		/* accept compressed connection ID */
-
-#define CCP_ISOPEN	0x100		/* look at CCP packets */
-#define CCP_ISUP	0x200		/* do packet comp/decomp */
-#define CCP_ERROR	0x400		/* (status) error in packet decomp */
-#define CCP_FATALERROR	0x800		/* (status) fatal error ditto */
-#define CCP_COMP_RUN	0x1000		/* (status) seen CCP ack sent */
-#define CCP_DECOMP_RUN	0x2000		/* (status) seen CCP ack rcvd */
-
-/*
- * Values for 8-bit-clean flags.
- */
-#define RCV_B7_0	1		/* have rcvd char with bit 7 = 0 */
-#define RCV_B7_1	2		/* have rcvd char with bit 7 = 1 */
-#define RCV_EVNP	4		/* have rcvd char with even parity */
-#define RCV_ODDP	8		/* have rcvd char with odd parity */
-
-/*
- * Values for the first byte of M_CTL messages passed between
- * PPP modules.
- */
-#define PPPCTL_OERROR	0xe0		/* output error [up] */
-#define PPPCTL_IERROR	0xe1		/* input error (e.g. FCS) [up] */
-#define PPPCTL_MTU	0xe2		/* set MTU [down] */
-#define PPPCTL_MRU	0xe3		/* set MRU [down] */
-#define PPPCTL_UNIT	0xe4		/* note PPP unit number [down] */
-
-/*
- * Values for the integer argument to PPPIO_DEBUG.
- */
-#define PPPDBG_DUMP	0x10000		/* print out debug info now */
-#define PPPDBG_LOG	0x100		/* log various things */
-#define PPPDBG_DRIVER	0		/* identifies ppp driver as target */
-#define PPPDBG_IF	1		/* identifies ppp network i/f target */
-#define PPPDBG_COMP	2		/* identifies ppp compression target */
-#define PPPDBG_AHDLC	3		/* identifies ppp async hdlc target */
diff --git a/mdk-stage1/ppp/include/net/slcompress.h b/mdk-stage1/ppp/include/net/slcompress.h
deleted file mode 100644
index 9e19bc0ed..000000000
--- a/mdk-stage1/ppp/include/net/slcompress.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Definitions for tcp compression routines.
- *
- * $Id$
- *
- * Copyright (c) 1989 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- *	Van Jacobson (van@helios.ee.lbl.gov), Dec 31, 1989:
- *	- Initial distribution.
- */
-
-#ifndef _SLCOMPRESS_H_
-#define _SLCOMPRESS_H_
-
-#define MAX_STATES 16		/* must be > 2 and < 256 */
-#define MAX_HDR MLEN		/* XXX 4bsd-ism: should really be 128 */
-
-/*
- * Compressed packet format:
- *
- * The first octet contains the packet type (top 3 bits), TCP
- * 'push' bit, and flags that indicate which of the 4 TCP sequence
- * numbers have changed (bottom 5 bits).  The next octet is a
- * conversation number that associates a saved IP/TCP header with
- * the compressed packet.  The next two octets are the TCP checksum
- * from the original datagram.  The next 0 to 15 octets are
- * sequence number changes, one change per bit set in the header
- * (there may be no changes and there are two special cases where
- * the receiver implicitly knows what changed -- see below).
- * 
- * There are 5 numbers which can change (they are always inserted
- * in the following order): TCP urgent pointer, window,
- * acknowlegement, sequence number and IP ID.  (The urgent pointer
- * is different from the others in that its value is sent, not the
- * change in value.)  Since typical use of SLIP links is biased
- * toward small packets (see comments on MTU/MSS below), changes
- * use a variable length coding with one octet for numbers in the
- * range 1 - 255 and 3 octets (0, MSB, LSB) for numbers in the
- * range 256 - 65535 or 0.  (If the change in sequence number or
- * ack is more than 65535, an uncompressed packet is sent.)
- */
-
-/*
- * Packet types (must not conflict with IP protocol version)
- *
- * The top nibble of the first octet is the packet type.  There are
- * three possible types: IP (not proto TCP or tcp with one of the
- * control flags set); uncompressed TCP (a normal IP/TCP packet but
- * with the 8-bit protocol field replaced by an 8-bit connection id --
- * this type of packet syncs the sender & receiver); and compressed
- * TCP (described above).
- *
- * LSB of 4-bit field is TCP "PUSH" bit (a worthless anachronism) and
- * is logically part of the 4-bit "changes" field that follows.  Top
- * three bits are actual packet type.  For backward compatibility
- * and in the interest of conserving bits, numbers are chosen so the
- * IP protocol version number (4) which normally appears in this nibble
- * means "IP packet".
- */
-
-/* packet types */
-#define TYPE_IP 0x40
-#define TYPE_UNCOMPRESSED_TCP 0x70
-#define TYPE_COMPRESSED_TCP 0x80
-#define TYPE_ERROR 0x00
-
-/* Bits in first octet of compressed packet */
-#define NEW_C	0x40	/* flag bits for what changed in a packet */
-#define NEW_I	0x20
-#define NEW_S	0x08
-#define NEW_A	0x04
-#define NEW_W	0x02
-#define NEW_U	0x01
-
-/* reserved, special-case values of above */
-#define SPECIAL_I (NEW_S|NEW_W|NEW_U)		/* echoed interactive traffic */
-#define SPECIAL_D (NEW_S|NEW_A|NEW_W|NEW_U)	/* unidirectional data */
-#define SPECIALS_MASK (NEW_S|NEW_A|NEW_W|NEW_U)
-
-#define TCP_PUSH_BIT 0x10
-
-
-/*
- * "state" data for each active tcp conversation on the wire.  This is
- * basically a copy of the entire IP/TCP header from the last packet
- * we saw from the conversation together with a small identifier
- * the transmit & receive ends of the line use to locate saved header.
- */
-struct cstate {
-	struct cstate *cs_next;	/* next most recently used cstate (xmit only) */
-	u_short cs_hlen;	/* size of hdr (receive only) */
-	u_char cs_id;		/* connection # associated with this state */
-	u_char cs_filler;
-	union {
-		char csu_hdr[MAX_HDR];
-		struct ip csu_ip;	/* ip/tcp hdr from most recent packet */
-	} slcs_u;
-};
-#define cs_ip slcs_u.csu_ip
-#define cs_hdr slcs_u.csu_hdr
-
-/*
- * all the state data for one serial line (we need one of these
- * per line).
- */
-struct slcompress {
-	struct cstate *last_cs;	/* most recently used tstate */
-	u_char last_recv;	/* last rcvd conn. id */
-	u_char last_xmit;	/* last sent conn. id */
-	u_short flags;
-#ifndef SL_NO_STATS
-	int sls_packets;	/* outbound packets */
-	int sls_compressed;	/* outbound compressed packets */
-	int sls_searches;	/* searches for connection state */
-	int sls_misses;		/* times couldn't find conn. state */
-	int sls_uncompressedin;	/* inbound uncompressed packets */
-	int sls_compressedin;	/* inbound compressed packets */
-	int sls_errorin;	/* inbound unknown type packets */
-	int sls_tossed;		/* inbound packets tossed because of error */
-#endif
-	struct cstate tstate[MAX_STATES];	/* xmit connection states */
-	struct cstate rstate[MAX_STATES];	/* receive connection states */
-};
-/* flag values */
-#define SLF_TOSS 1		/* tossing rcvd frames because of input err */
-
-void	sl_compress_init __P((struct slcompress *));
-void	sl_compress_setup __P((struct slcompress *, int));
-u_int	sl_compress_tcp __P((struct mbuf *,
-	    struct ip *, struct slcompress *, int));
-int	sl_uncompress_tcp __P((u_char **, int, u_int, struct slcompress *));
-int	sl_uncompress_tcp_core __P((u_char *, int, int, u_int,
-	    struct slcompress *, u_char **, u_int *));
-
-#endif /* _SLCOMPRESS_H_ */
diff --git a/mdk-stage1/ppp/include/net/vjcompress.h b/mdk-stage1/ppp/include/net/vjcompress.h
deleted file mode 100644
index c64596926..000000000
--- a/mdk-stage1/ppp/include/net/vjcompress.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Definitions for tcp compression routines.
- *
- * $Id$
- *
- * Copyright (c) 1989 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- *	Van Jacobson (van@helios.ee.lbl.gov), Dec 31, 1989:
- *	- Initial distribution.
- */
-
-#ifndef _VJCOMPRESS_H_
-#define _VJCOMPRESS_H_
-
-#define MAX_STATES 16		/* must be > 2 and < 256 */
-#define MAX_HDR	   128
-
-/*
- * Compressed packet format:
- *
- * The first octet contains the packet type (top 3 bits), TCP
- * 'push' bit, and flags that indicate which of the 4 TCP sequence
- * numbers have changed (bottom 5 bits).  The next octet is a
- * conversation number that associates a saved IP/TCP header with
- * the compressed packet.  The next two octets are the TCP checksum
- * from the original datagram.  The next 0 to 15 octets are
- * sequence number changes, one change per bit set in the header
- * (there may be no changes and there are two special cases where
- * the receiver implicitly knows what changed -- see below).
- * 
- * There are 5 numbers which can change (they are always inserted
- * in the following order): TCP urgent pointer, window,
- * acknowlegement, sequence number and IP ID.  (The urgent pointer
- * is different from the others in that its value is sent, not the
- * change in value.)  Since typical use of SLIP links is biased
- * toward small packets (see comments on MTU/MSS below), changes
- * use a variable length coding with one octet for numbers in the
- * range 1 - 255 and 3 octets (0, MSB, LSB) for numbers in the
- * range 256 - 65535 or 0.  (If the change in sequence number or
- * ack is more than 65535, an uncompressed packet is sent.)
- */
-
-/*
- * Packet types (must not conflict with IP protocol version)
- *
- * The top nibble of the first octet is the packet type.  There are
- * three possible types: IP (not proto TCP or tcp with one of the
- * control flags set); uncompressed TCP (a normal IP/TCP packet but
- * with the 8-bit protocol field replaced by an 8-bit connection id --
- * this type of packet syncs the sender & receiver); and compressed
- * TCP (described above).
- *
- * LSB of 4-bit field is TCP "PUSH" bit (a worthless anachronism) and
- * is logically part of the 4-bit "changes" field that follows.  Top
- * three bits are actual packet type.  For backward compatibility
- * and in the interest of conserving bits, numbers are chosen so the
- * IP protocol version number (4) which normally appears in this nibble
- * means "IP packet".
- */
-
-/* packet types */
-#define TYPE_IP 0x40
-#define TYPE_UNCOMPRESSED_TCP 0x70
-#define TYPE_COMPRESSED_TCP 0x80
-#define TYPE_ERROR 0x00
-
-/* Bits in first octet of compressed packet */
-#define NEW_C	0x40	/* flag bits for what changed in a packet */
-#define NEW_I	0x20
-#define NEW_S	0x08
-#define NEW_A	0x04
-#define NEW_W	0x02
-#define NEW_U	0x01
-
-/* reserved, special-case values of above */
-#define SPECIAL_I (NEW_S|NEW_W|NEW_U)		/* echoed interactive traffic */
-#define SPECIAL_D (NEW_S|NEW_A|NEW_W|NEW_U)	/* unidirectional data */
-#define SPECIALS_MASK (NEW_S|NEW_A|NEW_W|NEW_U)
-
-#define TCP_PUSH_BIT 0x10
-
-
-/*
- * "state" data for each active tcp conversation on the wire.  This is
- * basically a copy of the entire IP/TCP header from the last packet
- * we saw from the conversation together with a small identifier
- * the transmit & receive ends of the line use to locate saved header.
- */
-struct cstate {
-    struct cstate *cs_next;	/* next most recently used state (xmit only) */
-    u_short cs_hlen;		/* size of hdr (receive only) */
-    u_char cs_id;		/* connection # associated with this state */
-    u_char cs_filler;
-    union {
-	char csu_hdr[MAX_HDR];
-	struct ip csu_ip;	/* ip/tcp hdr from most recent packet */
-    } vjcs_u;
-};
-#define cs_ip vjcs_u.csu_ip
-#define cs_hdr vjcs_u.csu_hdr
-
-/*
- * all the state data for one serial line (we need one of these per line).
- */
-struct vjcompress {
-    struct cstate *last_cs;	/* most recently used tstate */
-    u_char last_recv;		/* last rcvd conn. id */
-    u_char last_xmit;		/* last sent conn. id */
-    u_short flags;
-#ifndef VJ_NO_STATS
-    struct vjstat stats;
-#endif
-    struct cstate tstate[MAX_STATES];	/* xmit connection states */
-    struct cstate rstate[MAX_STATES];	/* receive connection states */
-};
-
-/* flag values */
-#define VJF_TOSS 1		/* tossing rcvd frames because of input err */
-
-extern void  vj_compress_init __P((struct vjcompress *comp, int max_state));
-extern u_int vj_compress_tcp __P((struct ip *ip, u_int mlen,
-				struct vjcompress *comp, int compress_cid_flag,
-				u_char **vjhdrp));
-extern void  vj_uncompress_err __P((struct vjcompress *comp));
-extern int   vj_uncompress_uncomp __P((u_char *buf, int buflen,
-				struct vjcompress *comp));
-extern int   vj_uncompress_tcp __P((u_char *buf, int buflen, int total_len,
-				struct vjcompress *comp, u_char **hdrp,
-				u_int *hlenp));
-
-#endif /* _VJCOMPRESS_H_ */
diff --git a/mdk-stage1/ppp/include/pcap-int.h b/mdk-stage1/ppp/include/pcap-int.h
deleted file mode 100644
index 323994929..000000000
--- a/mdk-stage1/ppp/include/pcap-int.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright (c) 1994, 1995, 1996
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the Computer Systems
- *	Engineering Group at Lawrence Berkeley Laboratory.
- * 4. Neither the name of the University nor of the Laboratory may be used
- *    to endorse or promote products derived from this software without
- *    specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @(#) $Header$ (LBL)
- */
-
-#ifndef pcap_int_h
-#define pcap_int_h
-
-#include <pcap.h>
-
-/*
- * Savefile
- */
-struct pcap_sf {
-	FILE *rfile;
-	int swapped;
-	int version_major;
-	int version_minor;
-	u_char *base;
-};
-
-struct pcap_md {
-	struct pcap_stat stat;
-	/*XXX*/
-	int use_bpf;
-	u_long	TotPkts;	/* can't oflow for 79 hrs on ether */
-	u_long	TotAccepted;	/* count accepted by filter */
-	u_long	TotDrops;	/* count of dropped packets */
-	long	TotMissed;	/* missed by i/f during this run */
-	long	OrigMissed;	/* missed by i/f before this run */
-#ifdef linux
-	int pad;
-	int skip;
-	char *device;
-#endif
-};
-
-struct pcap {
-	int fd;
-	int snapshot;
-	int linktype;
-	int tzoff;		/* timezone offset */
-	int offset;		/* offset for proper alignment */
-
-	struct pcap_sf sf;
-	struct pcap_md md;
-
-	/*
-	 * Read buffer.
-	 */
-	int bufsize;
-	u_char *buffer;
-	u_char *bp;
-	int cc;
-
-	/*
-	 * Place holder for pcap_next().
-	 */
-	u_char *pkt;
-
-	
-	/*
-	 * Placeholder for filter code if bpf not in kernel.
-	 */
-	struct bpf_program fcode;
-
-	char errbuf[PCAP_ERRBUF_SIZE];
-};
-
-int	yylex(void);
-
-#ifndef min
-#define min(a, b) ((a) > (b) ? (b) : (a))
-#endif
-
-/* XXX should these be in pcap.h? */
-int	pcap_offline_read(pcap_t *, int, pcap_handler, u_char *);
-int	pcap_read(pcap_t *, int cnt, pcap_handler, u_char *);
-
-/* Ultrix pads to make everything line up on a nice boundary */
-#if defined(ultrix) || defined(__alpha)
-#define       PCAP_FDDIPAD 3
-#endif
-
-/* XXX */
-extern	int pcap_fddipad;
-#endif
diff --git a/mdk-stage1/ppp/linux/Makefile.top b/mdk-stage1/ppp/linux/Makefile.top
deleted file mode 100644
index fa34ce59f..000000000
--- a/mdk-stage1/ppp/linux/Makefile.top
+++ /dev/null
@@ -1,55 +0,0 @@
-# PPP top-level Makefile for Linux.
-
-
-BINDIR = $(DESTDIR)/usr/sbin
-MANDIR = $(DESTDIR)/usr/man
-ETCDIR = $(DESTDIR)/etc/ppp
-
-# uid 0 = root
-INSTALL= install
-
-all:
-	cd chat; $(MAKE) $(MFLAGS) all
-	cd pppd; $(MAKE) $(MFLAGS) all
-	cd pppstats; $(MAKE) $(MFLAGS) all
-	cd pppdump; $(MAKE) $(MFLAGS) all
-
-install: $(BINDIR) $(MANDIR)/man8 install-progs install-etcppp
-
-install-progs:
-	cd chat; $(MAKE) BINDIR=$(BINDIR) MANDIR=$(MANDIR) $(MFLAGS) install
-	cd pppd; $(MAKE) BINDIR=$(BINDIR) MANDIR=$(MANDIR) $(MFLAGS) install
-	cd pppstats; $(MAKE) BINDIR=$(BINDIR) MANDIR=$(MANDIR) $(MFLAGS) install
-	cd pppdump; $(MAKE) BINDIR=$(BINDIR) MANDIR=$(MANDIR) $(MFLAGS) install
-
-install-etcppp: $(ETCDIR) $(ETCDIR)/options $(ETCDIR)/pap-secrets \
-	$(ETCDIR)/chap-secrets
-
-$(ETCDIR)/options:
-	$(INSTALL) -c -m 644 etc.ppp/options $@
-$(ETCDIR)/pap-secrets:
-	$(INSTALL) -c -m 600 etc.ppp/pap-secrets $@
-$(ETCDIR)/chap-secrets:
-	$(INSTALL) -c -m 600 etc.ppp/chap-secrets $@
-
-$(BINDIR):
-	$(INSTALL) -d -m 755 $@
-$(MANDIR)/man8:
-	$(INSTALL) -d -m 755 $@
-$(ETCDIR):
-	$(INSTALL) -d -m 755 $@
-
-clean:
-	rm -f `find . -name '*.[oas]' -print`
-	rm -f `find . -name 'core' -print`
-	rm -f `find . -name '*~' -print`
-	cd chat; $(MAKE) clean
-	cd pppd; $(MAKE) clean
-	cd pppstats; $(MAKE) clean
-	cd pppdump; $(MAKE) clean
-
-dist-clean:	clean
-	rm -f Makefile `find . -name Makefile -print`
-
-#kernel:
-#	cd linux; ./kinstall.sh
diff --git a/mdk-stage1/ppp/modules/bsd-comp.c b/mdk-stage1/ppp/modules/bsd-comp.c
deleted file mode 100644
index b1b9325c7..000000000
--- a/mdk-stage1/ppp/modules/bsd-comp.c
+++ /dev/null
@@ -1,1116 +0,0 @@
-/* Because this code is derived from the 4.3BSD compress source:
- *
- *
- * Copyright (c) 1985, 1986 The Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * James A. Woods, derived from original work by Spencer Thomas
- * and Joseph Orost.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * This version is for use with STREAMS under SunOS 4.x,
- * Digital UNIX, AIX 4.x, and SVR4 systems including Solaris 2.
- *
- * $Id$
- */
-
-#ifdef AIX4
-#include <net/net_globals.h>
-#endif
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/stream.h>
-#include <net/ppp_defs.h>
-#include "ppp_mod.h"
-
-#ifdef SVR4
-#include <sys/byteorder.h>
-#ifndef _BIG_ENDIAN
-#define BSD_LITTLE_ENDIAN
-#endif
-#endif
-
-#ifdef __osf__
-#undef FIRST
-#undef LAST
-#define BSD_LITTLE_ENDIAN
-#endif
-
-#define PACKETPTR	mblk_t *
-#include <net/ppp-comp.h>
-
-#if DO_BSD_COMPRESS
-
-/*
- * PPP "BSD compress" compression
- *  The differences between this compression and the classic BSD LZW
- *  source are obvious from the requirement that the classic code worked
- *  with files while this handles arbitrarily long streams that
- *  are broken into packets.  They are:
- *
- *	When the code size expands, a block of junk is not emitted by
- *	    the compressor and not expected by the decompressor.
- *
- *	New codes are not necessarily assigned every time an old
- *	    code is output by the compressor.  This is because a packet
- *	    end forces a code to be emitted, but does not imply that a
- *	    new sequence has been seen.
- *
- *	The compression ratio is checked at the first end of a packet
- *	    after the appropriate gap.	Besides simplifying and speeding
- *	    things up, this makes it more likely that the transmitter
- *	    and receiver will agree when the dictionary is cleared when
- *	    compression is not going well.
- */
-
-/*
- * A dictionary for doing BSD compress.
- */
-struct bsd_db {
-    int	    totlen;			/* length of this structure */
-    u_int   hsize;			/* size of the hash table */
-    u_char  hshift;			/* used in hash function */
-    u_char  n_bits;			/* current bits/code */
-    u_char  maxbits;
-    u_char  debug;
-    u_char  unit;
-    u_short seqno;			/* sequence number of next packet */
-    u_int   hdrlen;			/* header length to preallocate */
-    u_int   mru;
-    u_int   maxmaxcode;			/* largest valid code */
-    u_int   max_ent;			/* largest code in use */
-    u_int   in_count;			/* uncompressed bytes, aged */
-    u_int   bytes_out;			/* compressed bytes, aged */
-    u_int   ratio;			/* recent compression ratio */
-    u_int   checkpoint;			/* when to next check the ratio */
-    u_int   clear_count;		/* times dictionary cleared */
-    u_int   incomp_count;		/* incompressible packets */
-    u_int   incomp_bytes;		/* incompressible bytes */
-    u_int   uncomp_count;		/* uncompressed packets */
-    u_int   uncomp_bytes;		/* uncompressed bytes */
-    u_int   comp_count;			/* compressed packets */
-    u_int   comp_bytes;			/* compressed bytes */
-    u_short *lens;			/* array of lengths of codes */
-    struct bsd_dict {
-	union {				/* hash value */
-	    u_int32_t	fcode;
-	    struct {
-#ifdef BSD_LITTLE_ENDIAN
-		u_short prefix;		/* preceding code */
-		u_char	suffix;		/* last character of new code */
-		u_char	pad;
-#else
-		u_char	pad;
-		u_char	suffix;		/* last character of new code */
-		u_short prefix;		/* preceding code */
-#endif
-	    } hs;
-	} f;
-	u_short codem1;			/* output of hash table -1 */
-	u_short cptr;			/* map code to hash table entry */
-    } dict[1];
-};
-
-#define BSD_OVHD	2		/* BSD compress overhead/packet */
-#define BSD_INIT_BITS	BSD_MIN_BITS
-
-static void	*bsd_comp_alloc __P((u_char *options, int opt_len));
-static void	*bsd_decomp_alloc __P((u_char *options, int opt_len));
-static void	bsd_free __P((void *state));
-static int	bsd_comp_init __P((void *state, u_char *options, int opt_len,
-				   int unit, int hdrlen, int debug));
-static int	bsd_decomp_init __P((void *state, u_char *options, int opt_len,
-				     int unit, int hdrlen, int mru, int debug));
-static int	bsd_compress __P((void *state, mblk_t **mret,
-				  mblk_t *mp, int slen, int maxolen));
-static void	bsd_incomp __P((void *state, mblk_t *dmsg));
-static int	bsd_decompress __P((void *state, mblk_t *cmp, mblk_t **dmpp));
-static void	bsd_reset __P((void *state));
-static void	bsd_comp_stats __P((void *state, struct compstat *stats));
-
-/*
- * Procedures exported to ppp_comp.c.
- */
-struct compressor ppp_bsd_compress = {
-    CI_BSD_COMPRESS,		/* compress_proto */
-    bsd_comp_alloc,		/* comp_alloc */
-    bsd_free,			/* comp_free */
-    bsd_comp_init,		/* comp_init */
-    bsd_reset,			/* comp_reset */
-    bsd_compress,		/* compress */
-    bsd_comp_stats,		/* comp_stat */
-    bsd_decomp_alloc,		/* decomp_alloc */
-    bsd_free,			/* decomp_free */
-    bsd_decomp_init,		/* decomp_init */
-    bsd_reset,			/* decomp_reset */
-    bsd_decompress,		/* decompress */
-    bsd_incomp,			/* incomp */
-    bsd_comp_stats,		/* decomp_stat */
-};
-
-/*
- * the next two codes should not be changed lightly, as they must not
- * lie within the contiguous general code space.
- */
-#define CLEAR	256			/* table clear output code */
-#define FIRST	257			/* first free entry */
-#define LAST	255
-
-#define MAXCODE(b)	((1 << (b)) - 1)
-#define BADCODEM1	MAXCODE(BSD_MAX_BITS)
-
-#define BSD_HASH(prefix,suffix,hshift)	((((u_int32_t)(suffix)) << (hshift)) \
-					 ^ (u_int32_t)(prefix))
-#define BSD_KEY(prefix,suffix)		((((u_int32_t)(suffix)) << 16) \
-					 + (u_int32_t)(prefix))
-
-#define CHECK_GAP	10000		/* Ratio check interval */
-
-#define RATIO_SCALE_LOG	8
-#define RATIO_SCALE	(1<<RATIO_SCALE_LOG)
-#define RATIO_MAX	(0x7fffffff>>RATIO_SCALE_LOG)
-
-#define DECOMP_CHUNK	256
-
-/*
- * clear the dictionary
- */
-static void
-bsd_clear(db)
-    struct bsd_db *db;
-{
-    db->clear_count++;
-    db->max_ent = FIRST-1;
-    db->n_bits = BSD_INIT_BITS;
-    db->ratio = 0;
-    db->bytes_out = 0;
-    db->in_count = 0;
-    db->checkpoint = CHECK_GAP;
-}
-
-/*
- * If the dictionary is full, then see if it is time to reset it.
- *
- * Compute the compression ratio using fixed-point arithmetic
- * with 8 fractional bits.
- *
- * Since we have an infinite stream instead of a single file,
- * watch only the local compression ratio.
- *
- * Since both peers must reset the dictionary at the same time even in
- * the absence of CLEAR codes (while packets are incompressible), they
- * must compute the same ratio.
- */
-static int				/* 1=output CLEAR */
-bsd_check(db)
-    struct bsd_db *db;
-{
-    u_int new_ratio;
-
-    if (db->in_count >= db->checkpoint) {
-	/* age the ratio by limiting the size of the counts */
-	if (db->in_count >= RATIO_MAX
-	    || db->bytes_out >= RATIO_MAX) {
-	    db->in_count -= db->in_count/4;
-	    db->bytes_out -= db->bytes_out/4;
-	}
-
-	db->checkpoint = db->in_count + CHECK_GAP;
-
-	if (db->max_ent >= db->maxmaxcode) {
-	    /* Reset the dictionary only if the ratio is worse,
-	     * or if it looks as if it has been poisoned
-	     * by incompressible data.
-	     *
-	     * This does not overflow, because
-	     *	db->in_count <= RATIO_MAX.
-	     */
-	    new_ratio = db->in_count << RATIO_SCALE_LOG;
-	    if (db->bytes_out != 0)
-		new_ratio /= db->bytes_out;
-
-	    if (new_ratio < db->ratio || new_ratio < 1 * RATIO_SCALE) {
-		bsd_clear(db);
-		return 1;
-	    }
-	    db->ratio = new_ratio;
-	}
-    }
-    return 0;
-}
-
-/*
- * Return statistics.
- */
-static void
-bsd_comp_stats(state, stats)
-    void *state;
-    struct compstat *stats;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-    u_int out;
-
-    stats->unc_bytes = db->uncomp_bytes;
-    stats->unc_packets = db->uncomp_count;
-    stats->comp_bytes = db->comp_bytes;
-    stats->comp_packets = db->comp_count;
-    stats->inc_bytes = db->incomp_bytes;
-    stats->inc_packets = db->incomp_count;
-    stats->ratio = db->in_count;
-    out = db->bytes_out;
-    if (stats->ratio <= 0x7fffff)
-	stats->ratio <<= 8;
-    else
-	out >>= 8;
-    if (out != 0)
-	stats->ratio /= out;
-}
-
-/*
- * Reset state, as on a CCP ResetReq.
- */
-static void
-bsd_reset(state)
-    void *state;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-
-    db->seqno = 0;
-    bsd_clear(db);
-    db->clear_count = 0;
-}
-
-/*
- * Allocate space for a (de) compressor.
- */
-static void *
-bsd_alloc(options, opt_len, decomp)
-    u_char *options;
-    int opt_len, decomp;
-{
-    int bits;
-    u_int newlen, hsize, hshift, maxmaxcode;
-    struct bsd_db *db;
-
-    if (opt_len != 3 || options[0] != CI_BSD_COMPRESS || options[1] != 3
-	|| BSD_VERSION(options[2]) != BSD_CURRENT_VERSION)
-	return NULL;
-
-    bits = BSD_NBITS(options[2]);
-    switch (bits) {
-    case 9:			/* needs 82152 for both directions */
-    case 10:			/* needs 84144 */
-    case 11:			/* needs 88240 */
-    case 12:			/* needs 96432 */
-	hsize = 5003;
-	hshift = 4;
-	break;
-    case 13:			/* needs 176784 */
-	hsize = 9001;
-	hshift = 5;
-	break;
-    case 14:			/* needs 353744 */
-	hsize = 18013;
-	hshift = 6;
-	break;
-    case 15:			/* needs 691440 */
-	hsize = 35023;
-	hshift = 7;
-	break;
-    case 16:			/* needs 1366160--far too much, */
-	/* hsize = 69001; */	/* and 69001 is too big for cptr */
-	/* hshift = 8; */	/* in struct bsd_db */
-	/* break; */
-    default:
-	return NULL;
-    }
-
-    maxmaxcode = MAXCODE(bits);
-    newlen = sizeof(*db) + (hsize-1) * (sizeof(db->dict[0]));
-#ifdef __osf__
-    db = (struct bsd_db *) ALLOC_SLEEP(newlen);
-#else
-    db = (struct bsd_db *) ALLOC_NOSLEEP(newlen);
-#endif
-    if (!db)
-	return NULL;
-    bzero(db, sizeof(*db) - sizeof(db->dict));
-
-    if (!decomp) {
-	db->lens = NULL;
-    } else {
-#ifdef __osf__
-	db->lens = (u_short *) ALLOC_SLEEP((maxmaxcode+1) * sizeof(db->lens[0]));
-#else
-	db->lens = (u_short *) ALLOC_NOSLEEP((maxmaxcode+1) * sizeof(db->lens[0]));
-#endif
-	if (!db->lens) {
-	    FREE(db, newlen);
-	    return NULL;
-	}
-    }
-
-    db->totlen = newlen;
-    db->hsize = hsize;
-    db->hshift = hshift;
-    db->maxmaxcode = maxmaxcode;
-    db->maxbits = bits;
-
-    return (void *) db;
-}
-
-static void
-bsd_free(state)
-    void *state;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-
-    if (db->lens)
-	FREE(db->lens, (db->maxmaxcode+1) * sizeof(db->lens[0]));
-    FREE(db, db->totlen);
-}
-
-static void *
-bsd_comp_alloc(options, opt_len)
-    u_char *options;
-    int opt_len;
-{
-    return bsd_alloc(options, opt_len, 0);
-}
-
-static void *
-bsd_decomp_alloc(options, opt_len)
-    u_char *options;
-    int opt_len;
-{
-    return bsd_alloc(options, opt_len, 1);
-}
-
-/*
- * Initialize the database.
- */
-static int
-bsd_init(db, options, opt_len, unit, hdrlen, mru, debug, decomp)
-    struct bsd_db *db;
-    u_char *options;
-    int opt_len, unit, hdrlen, mru, debug, decomp;
-{
-    int i;
-
-    if (opt_len < CILEN_BSD_COMPRESS
-	|| options[0] != CI_BSD_COMPRESS || options[1] != CILEN_BSD_COMPRESS
-	|| BSD_VERSION(options[2]) != BSD_CURRENT_VERSION
-	|| BSD_NBITS(options[2]) != db->maxbits
-	|| decomp && db->lens == NULL)
-	return 0;
-
-    if (decomp) {
-	i = LAST+1;
-	while (i != 0)
-	    db->lens[--i] = 1;
-    }
-    i = db->hsize;
-    while (i != 0) {
-	db->dict[--i].codem1 = BADCODEM1;
-	db->dict[i].cptr = 0;
-    }
-
-    db->unit = unit;
-    db->hdrlen = hdrlen;
-    db->mru = mru;
-    if (debug)
-	db->debug = 1;
-
-    bsd_reset(db);
-
-    return 1;
-}
-
-static int
-bsd_comp_init(state, options, opt_len, unit, hdrlen, debug)
-    void *state;
-    u_char *options;
-    int opt_len, unit, hdrlen, debug;
-{
-    return bsd_init((struct bsd_db *) state, options, opt_len,
-		    unit, hdrlen, 0, debug, 0);
-}
-
-static int
-bsd_decomp_init(state, options, opt_len, unit, hdrlen, mru, debug)
-    void *state;
-    u_char *options;
-    int opt_len, unit, hdrlen, mru, debug;
-{
-    return bsd_init((struct bsd_db *) state, options, opt_len,
-		    unit, hdrlen, mru, debug, 1);
-}
-
-
-/*
- * compress a packet
- *	One change from the BSD compress command is that when the
- *	code size expands, we do not output a bunch of padding.
- *
- * N.B. at present, we ignore the hdrlen specified in the comp_init call.
- */
-static int			/* new slen */
-bsd_compress(state, mretp, mp, slen, maxolen)
-    void *state;
-    mblk_t **mretp;		/* return compressed mbuf chain here */
-    mblk_t *mp;			/* from here */
-    int slen;			/* uncompressed length */
-    int maxolen;		/* max compressed length */
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-    int hshift = db->hshift;
-    u_int max_ent = db->max_ent;
-    u_int n_bits = db->n_bits;
-    u_int bitno = 32;
-    u_int32_t accm = 0, fcode;
-    struct bsd_dict *dictp;
-    u_char c;
-    int hval, disp, ent, ilen;
-    mblk_t *np, *mret;
-    u_char *rptr, *wptr;
-    u_char *cp_end;
-    int olen;
-    mblk_t *m, **mnp;
-
-#define PUTBYTE(v) {					\
-    if (wptr) {						\
-	*wptr++ = (v);					\
-	if (wptr >= cp_end) {				\
-	    m->b_wptr = wptr;				\
-	    m = m->b_cont;				\
-	    if (m) {					\
-		wptr = m->b_wptr;			\
-		cp_end = m->b_datap->db_lim;		\
-	    } else					\
-		wptr = NULL;				\
-	}						\
-    }							\
-    ++olen;						\
-}
-
-#define OUTPUT(ent) {					\
-    bitno -= n_bits;					\
-    accm |= ((ent) << bitno);				\
-    do {						\
-	PUTBYTE(accm >> 24);				\
-	accm <<= 8;					\
-	bitno += 8;					\
-    } while (bitno <= 24);				\
-}
-
-    /*
-     * First get the protocol and check that we're
-     * interested in this packet.
-     */
-    *mretp = NULL;
-    rptr = mp->b_rptr;
-    if (rptr + PPP_HDRLEN > mp->b_wptr) {
-	if (!pullupmsg(mp, PPP_HDRLEN))
-	    return 0;
-	rptr = mp->b_rptr;
-    }
-    ent = PPP_PROTOCOL(rptr);		/* get the protocol */
-    if (ent < 0x21 || ent > 0xf9)
-	return 0;
-
-    /* Don't generate compressed packets which are larger than
-       the uncompressed packet. */
-    if (maxolen > slen)
-	maxolen = slen;
-
-    /* Allocate enough message blocks to give maxolen total space. */
-    mnp = &mret;
-    for (olen = maxolen; olen > 0; ) {
-	m = allocb((olen < 4096? olen: 4096), BPRI_MED);
-	*mnp = m;
-	if (m == NULL) {
-	    if (mret != NULL) {
-		freemsg(mret);
-		mnp = &mret;
-	    }
-	    break;
-	}
-	mnp = &m->b_cont;
-	olen -= m->b_datap->db_lim - m->b_wptr;
-    }
-    *mnp = NULL;
-
-    if ((m = mret) != NULL) {
-	wptr = m->b_wptr;
-	cp_end = m->b_datap->db_lim;
-    } else
-	wptr = cp_end = NULL;
-    olen = 0;
-
-    /*
-     * Copy the PPP header over, changing the protocol,
-     * and install the 2-byte sequence number.
-     */
-    if (wptr) {
-	wptr[0] = PPP_ADDRESS(rptr);
-	wptr[1] = PPP_CONTROL(rptr);
-	wptr[2] = 0;		/* change the protocol */
-	wptr[3] = PPP_COMP;
-	wptr[4] = db->seqno >> 8;
-	wptr[5] = db->seqno;
-	wptr += PPP_HDRLEN + BSD_OVHD;
-    }
-    ++db->seqno;
-    rptr += PPP_HDRLEN;
-
-    slen = mp->b_wptr - rptr;
-    ilen = slen + 1;
-    np = mp->b_cont;
-    for (;;) {
-	if (slen <= 0) {
-	    if (!np)
-		break;
-	    rptr = np->b_rptr;
-	    slen = np->b_wptr - rptr;
-	    np = np->b_cont;
-	    if (!slen)
-		continue;   /* handle 0-length buffers */
-	    ilen += slen;
-	}
-
-	slen--;
-	c = *rptr++;
-	fcode = BSD_KEY(ent, c);
-	hval = BSD_HASH(ent, c, hshift);
-	dictp = &db->dict[hval];
-
-	/* Validate and then check the entry. */
-	if (dictp->codem1 >= max_ent)
-	    goto nomatch;
-	if (dictp->f.fcode == fcode) {
-	    ent = dictp->codem1+1;
-	    continue;	/* found (prefix,suffix) */
-	}
-
-	/* continue probing until a match or invalid entry */
-	disp = (hval == 0) ? 1 : hval;
-	do {
-	    hval += disp;
-	    if (hval >= db->hsize)
-		hval -= db->hsize;
-	    dictp = &db->dict[hval];
-	    if (dictp->codem1 >= max_ent)
-		goto nomatch;
-	} while (dictp->f.fcode != fcode);
-	ent = dictp->codem1 + 1;	/* finally found (prefix,suffix) */
-	continue;
-
-    nomatch:
-	OUTPUT(ent);		/* output the prefix */
-
-	/* code -> hashtable */
-	if (max_ent < db->maxmaxcode) {
-	    struct bsd_dict *dictp2;
-	    /* expand code size if needed */
-	    if (max_ent >= MAXCODE(n_bits))
-		db->n_bits = ++n_bits;
-
-	    /* Invalidate old hash table entry using
-	     * this code, and then take it over.
-	     */
-	    dictp2 = &db->dict[max_ent+1];
-	    if (db->dict[dictp2->cptr].codem1 == max_ent)
-		db->dict[dictp2->cptr].codem1 = BADCODEM1;
-	    dictp2->cptr = hval;
-	    dictp->codem1 = max_ent;
-	    dictp->f.fcode = fcode;
-
-	    db->max_ent = ++max_ent;
-	}
-	ent = c;
-    }
-
-    OUTPUT(ent);		/* output the last code */
-    db->bytes_out += olen;
-    db->in_count += ilen;
-    if (bitno < 32)
-	++db->bytes_out;	/* count complete bytes */
-
-    if (bsd_check(db))
-	OUTPUT(CLEAR);		/* do not count the CLEAR */
-
-    /*
-     * Pad dribble bits of last code with ones.
-     * Do not emit a completely useless byte of ones.
-     */
-    if (bitno != 32)
-	PUTBYTE((accm | (0xff << (bitno-8))) >> 24);
-
-    /*
-     * Increase code size if we would have without the packet
-     * boundary and as the decompressor will.
-     */
-    if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode)
-	db->n_bits++;
-
-    db->uncomp_bytes += ilen;
-    ++db->uncomp_count;
-    if (olen + PPP_HDRLEN + BSD_OVHD > maxolen && mret != NULL) {
-	/* throw away the compressed stuff if it is longer than uncompressed */
-	freemsg(mret);
-	mret = NULL;
-	++db->incomp_count;
-	db->incomp_bytes += ilen;
-    } else if (wptr != NULL) {
-	m->b_wptr = wptr;
-	if (m->b_cont) {
-	    freemsg(m->b_cont);
-	    m->b_cont = NULL;
-	}
-	++db->comp_count;
-	db->comp_bytes += olen + BSD_OVHD;
-    }
-
-    *mretp = mret;
-    return olen + PPP_HDRLEN + BSD_OVHD;
-#undef OUTPUT
-#undef PUTBYTE
-}
-
-
-/*
- * Update the "BSD Compress" dictionary on the receiver for
- * incompressible data by pretending to compress the incoming data.
- */
-static void
-bsd_incomp(state, dmsg)
-    void *state;
-    mblk_t *dmsg;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-    u_int hshift = db->hshift;
-    u_int max_ent = db->max_ent;
-    u_int n_bits = db->n_bits;
-    struct bsd_dict *dictp;
-    u_int32_t fcode;
-    u_char c;
-    long hval, disp;
-    int slen, ilen;
-    u_int bitno = 7;
-    u_char *rptr;
-    u_int ent;
-
-    rptr = dmsg->b_rptr;
-    if (rptr + PPP_HDRLEN > dmsg->b_wptr) {
-	if (!pullupmsg(dmsg, PPP_HDRLEN))
-	    return;
-	rptr = dmsg->b_rptr;
-    }
-    ent = PPP_PROTOCOL(rptr);		/* get the protocol */
-    if (ent < 0x21 || ent > 0xf9)
-	return;
-
-    db->seqno++;
-    ilen = 1;		/* count the protocol as 1 byte */
-    rptr += PPP_HDRLEN;
-    for (;;) {
-	slen = dmsg->b_wptr - rptr;
-	if (slen <= 0) {
-	    dmsg = dmsg->b_cont;
-	    if (!dmsg)
-		break;
-	    rptr = dmsg->b_rptr;
-	    continue;		/* skip zero-length buffers */
-	}
-	ilen += slen;
-
-	do {
-	    c = *rptr++;
-	    fcode = BSD_KEY(ent, c);
-	    hval = BSD_HASH(ent, c, hshift);
-	    dictp = &db->dict[hval];
-
-	    /* validate and then check the entry */
-	    if (dictp->codem1 >= max_ent)
-		goto nomatch;
-	    if (dictp->f.fcode == fcode) {
-		ent = dictp->codem1+1;
-		continue;   /* found (prefix,suffix) */
-	    }
-
-	    /* continue probing until a match or invalid entry */
-	    disp = (hval == 0) ? 1 : hval;
-	    do {
-		hval += disp;
-		if (hval >= db->hsize)
-		    hval -= db->hsize;
-		dictp = &db->dict[hval];
-		if (dictp->codem1 >= max_ent)
-		    goto nomatch;
-	    } while (dictp->f.fcode != fcode);
-	    ent = dictp->codem1+1;
-	    continue;	/* finally found (prefix,suffix) */
-
-	nomatch:		/* output (count) the prefix */
-	    bitno += n_bits;
-
-	    /* code -> hashtable */
-	    if (max_ent < db->maxmaxcode) {
-		struct bsd_dict *dictp2;
-		/* expand code size if needed */
-		if (max_ent >= MAXCODE(n_bits))
-		    db->n_bits = ++n_bits;
-
-		/* Invalidate previous hash table entry
-		 * assigned this code, and then take it over.
-		 */
-		dictp2 = &db->dict[max_ent+1];
-		if (db->dict[dictp2->cptr].codem1 == max_ent)
-		    db->dict[dictp2->cptr].codem1 = BADCODEM1;
-		dictp2->cptr = hval;
-		dictp->codem1 = max_ent;
-		dictp->f.fcode = fcode;
-
-		db->max_ent = ++max_ent;
-		db->lens[max_ent] = db->lens[ent]+1;
-	    }
-	    ent = c;
-	} while (--slen != 0);
-    }
-    bitno += n_bits;		/* output (count) the last code */
-    db->bytes_out += bitno/8;
-    db->in_count += ilen;
-    (void)bsd_check(db);
-
-    ++db->incomp_count;
-    db->incomp_bytes += ilen;
-    ++db->uncomp_count;
-    db->uncomp_bytes += ilen;
-
-    /* Increase code size if we would have without the packet
-     * boundary and as the decompressor will.
-     */
-    if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode)
-	db->n_bits++;
-}
-
-
-/*
- * Decompress "BSD Compress"
- *
- * Because of patent problems, we return DECOMP_ERROR for errors
- * found by inspecting the input data and for system problems, but
- * DECOMP_FATALERROR for any errors which could possibly be said to
- * be being detected "after" decompression.  For DECOMP_ERROR,
- * we can issue a CCP reset-request; for DECOMP_FATALERROR, we may be
- * infringing a patent of Motorola's if we do, so we take CCP down
- * instead.
- *
- * Given that the frame has the correct sequence number and a good FCS,
- * errors such as invalid codes in the input most likely indicate a
- * bug, so we return DECOMP_FATALERROR for them in order to turn off
- * compression, even though they are detected by inspecting the input.
- */
-static int
-bsd_decompress(state, cmsg, dmpp)
-    void *state;
-    mblk_t *cmsg, **dmpp;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-    u_int max_ent = db->max_ent;
-    u_int32_t accm = 0;
-    u_int bitno = 32;		/* 1st valid bit in accm */
-    u_int n_bits = db->n_bits;
-    u_int tgtbitno = 32-n_bits;	/* bitno when we have a code */
-    struct bsd_dict *dictp;
-    int explen, i, seq, len;
-    u_int incode, oldcode, finchar;
-    u_char *p, *rptr, *wptr;
-    mblk_t *dmsg, *mret;
-    int adrs, ctrl, ilen;
-    int dlen, space, codelen, extra;
-
-    /*
-     * Get at least the BSD Compress header in the first buffer
-     */
-    rptr = cmsg->b_rptr;
-    if (rptr + PPP_HDRLEN + BSD_OVHD >= cmsg->b_wptr) {
-	if (!pullupmsg(cmsg, PPP_HDRLEN + BSD_OVHD + 1)) {
-	    if (db->debug)
-		printf("bsd_decomp%d: failed to pullup\n", db->unit);
-	    return DECOMP_ERROR;
-	}
-	rptr = cmsg->b_rptr;
-    }
-
-    /*
-     * Save the address/control from the PPP header
-     * and then get the sequence number.
-     */
-    adrs = PPP_ADDRESS(rptr);
-    ctrl = PPP_CONTROL(rptr);
-    rptr += PPP_HDRLEN;
-    seq = (rptr[0] << 8) + rptr[1];
-    rptr += BSD_OVHD;
-    ilen = len = cmsg->b_wptr - rptr;
-
-    /*
-     * Check the sequence number and give up if it is not what we expect.
-     */
-    if (seq != db->seqno++) {
-	if (db->debug)
-	    printf("bsd_decomp%d: bad sequence # %d, expected %d\n",
-		   db->unit, seq, db->seqno - 1);
-	return DECOMP_ERROR;
-    }
-
-    /*
-     * Allocate one message block to start with.
-     */
-    if ((dmsg = allocb(DECOMP_CHUNK + db->hdrlen, BPRI_MED)) == NULL)
-	return DECOMP_ERROR;
-    mret = dmsg;
-    dmsg->b_wptr += db->hdrlen;
-    dmsg->b_rptr = wptr = dmsg->b_wptr;
-
-    /* Fill in the ppp header, but not the last byte of the protocol
-       (that comes from the decompressed data). */
-    wptr[0] = adrs;
-    wptr[1] = ctrl;
-    wptr[2] = 0;
-    wptr += PPP_HDRLEN - 1;
-    space = dmsg->b_datap->db_lim - wptr;
-
-    oldcode = CLEAR;
-    explen = 0;
-    for (;;) {
-	if (len == 0) {
-	    cmsg = cmsg->b_cont;
-	    if (!cmsg)		/* quit at end of message */
-		break;
-	    rptr = cmsg->b_rptr;
-	    len = cmsg->b_wptr - rptr;
-	    ilen += len;
-	    continue;		/* handle 0-length buffers */
-	}
-
-	/*
-	 * Accumulate bytes until we have a complete code.
-	 * Then get the next code, relying on the 32-bit,
-	 * unsigned accm to mask the result.
-	 */
-	bitno -= 8;
-	accm |= *rptr++ << bitno;
-	--len;
-	if (tgtbitno < bitno)
-	    continue;
-	incode = accm >> tgtbitno;
-	accm <<= n_bits;
-	bitno += n_bits;
-
-	if (incode == CLEAR) {
-	    /*
-	     * The dictionary must only be cleared at
-	     * the end of a packet.  But there could be an
-	     * empty message block at the end.
-	     */
-	    if (len > 0 || cmsg->b_cont != 0) {
-		if (cmsg->b_cont)
-		    len += msgdsize(cmsg->b_cont);
-		if (len > 0) {
-		    freemsg(dmsg);
-		    if (db->debug)
-			printf("bsd_decomp%d: bad CLEAR\n", db->unit);
-		    return DECOMP_FATALERROR;
-		}
-	    }
-	    bsd_clear(db);
-	    explen = ilen = 0;
-	    break;
-	}
-
-	if (incode > max_ent + 2 || incode > db->maxmaxcode
-	    || incode > max_ent && oldcode == CLEAR) {
-	    freemsg(dmsg);
-	    if (db->debug) {
-		printf("bsd_decomp%d: bad code 0x%x oldcode=0x%x ",
-		       db->unit, incode, oldcode);
-		printf("max_ent=0x%x dlen=%d seqno=%d\n",
-		       max_ent, dlen, db->seqno);
-	    }
-	    return DECOMP_FATALERROR;	/* probably a bug */
-	}
-
-	/* Special case for KwKwK string. */
-	if (incode > max_ent) {
-	    finchar = oldcode;
-	    extra = 1;
-	} else {
-	    finchar = incode;
-	    extra = 0;
-	}
-
-	codelen = db->lens[finchar];
-	explen += codelen + extra;
-	if (explen > db->mru + 1) {
-	    freemsg(dmsg);
-	    if (db->debug)
-		printf("bsd_decomp%d: ran out of mru\n", db->unit);
-	    return DECOMP_FATALERROR;
-	}
-
-	/*
-	 * Decode this code and install it in the decompressed buffer.
-	 */
-	space -= codelen + extra;
-	if (space < 0) {
-	    /* Allocate another message block. */
-	    dmsg->b_wptr = wptr;
-	    dlen = codelen + extra;
-	    if (dlen < DECOMP_CHUNK)
-		dlen = DECOMP_CHUNK;
-	    if ((dmsg->b_cont = allocb(dlen, BPRI_MED)) == NULL) {
-		freemsg(dmsg);
-		return DECOMP_ERROR;
-	    }
-	    dmsg = dmsg->b_cont;
-	    wptr = dmsg->b_wptr;
-	    space = dmsg->b_datap->db_lim - wptr - codelen - extra;
-	}
-	p = (wptr += codelen);
-	while (finchar > LAST) {
-	    dictp = &db->dict[db->dict[finchar].cptr];
-#ifdef DEBUG
-	    --codelen;
-	    if (codelen <= 0) {
-		freemsg(dmsg);
-		printf("bsd_decomp%d: fell off end of chain ", db->unit);
-		printf("0x%x at 0x%x by 0x%x, max_ent=0x%x\n",
-		       incode, finchar, db->dict[finchar].cptr, max_ent);
-		return DECOMP_FATALERROR;
-	    }
-	    if (dictp->codem1 != finchar-1) {
-		freemsg(dmsg);
-		printf("bsd_decomp%d: bad code chain 0x%x finchar=0x%x ",
-		       db->unit, incode, finchar);
-		printf("oldcode=0x%x cptr=0x%x codem1=0x%x\n", oldcode,
-		       db->dict[finchar].cptr, dictp->codem1);
-		return DECOMP_FATALERROR;
-	    }
-#endif
-	    *--p = dictp->f.hs.suffix;
-	    finchar = dictp->f.hs.prefix;
-	}
-	*--p = finchar;
-
-#ifdef DEBUG
-	if (--codelen != 0)
-	    printf("bsd_decomp%d: short by %d after code 0x%x, max_ent=0x%x\n",
-		   db->unit, codelen, incode, max_ent);
-#endif
-
-	if (extra)		/* the KwKwK case again */
-	    *wptr++ = finchar;
-
-	/*
-	 * If not first code in a packet, and
-	 * if not out of code space, then allocate a new code.
-	 *
-	 * Keep the hash table correct so it can be used
-	 * with uncompressed packets.
-	 */
-	if (oldcode != CLEAR && max_ent < db->maxmaxcode) {
-	    struct bsd_dict *dictp2;
-	    u_int32_t fcode;
-	    int hval, disp;
-
-	    fcode = BSD_KEY(oldcode,finchar);
-	    hval = BSD_HASH(oldcode,finchar,db->hshift);
-	    dictp = &db->dict[hval];
-
-	    /* look for a free hash table entry */
-	    if (dictp->codem1 < max_ent) {
-		disp = (hval == 0) ? 1 : hval;
-		do {
-		    hval += disp;
-		    if (hval >= db->hsize)
-			hval -= db->hsize;
-		    dictp = &db->dict[hval];
-		} while (dictp->codem1 < max_ent);
-	    }
-
-	    /*
-	     * Invalidate previous hash table entry
-	     * assigned this code, and then take it over
-	     */
-	    dictp2 = &db->dict[max_ent+1];
-	    if (db->dict[dictp2->cptr].codem1 == max_ent) {
-		db->dict[dictp2->cptr].codem1 = BADCODEM1;
-	    }
-	    dictp2->cptr = hval;
-	    dictp->codem1 = max_ent;
-	    dictp->f.fcode = fcode;
-
-	    db->max_ent = ++max_ent;
-	    db->lens[max_ent] = db->lens[oldcode]+1;
-
-	    /* Expand code size if needed. */
-	    if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode) {
-		db->n_bits = ++n_bits;
-		tgtbitno = 32-n_bits;
-	    }
-	}
-	oldcode = incode;
-    }
-    dmsg->b_wptr = wptr;
-
-    /*
-     * Keep the checkpoint right so that incompressible packets
-     * clear the dictionary at the right times.
-     */
-    db->bytes_out += ilen;
-    db->in_count += explen;
-    if (bsd_check(db) && db->debug) {
-	printf("bsd_decomp%d: peer should have cleared dictionary\n",
-	       db->unit);
-    }
-
-    ++db->comp_count;
-    db->comp_bytes += ilen + BSD_OVHD;
-    ++db->uncomp_count;
-    db->uncomp_bytes += explen;
-
-    *dmpp = mret;
-    return DECOMP_OK;
-}
-#endif /* DO_BSD_COMPRESS */
diff --git a/mdk-stage1/ppp/modules/deflate.c b/mdk-stage1/ppp/modules/deflate.c
deleted file mode 100644
index 1b9054412..000000000
--- a/mdk-stage1/ppp/modules/deflate.c
+++ /dev/null
@@ -1,760 +0,0 @@
-/*
- * ppp_deflate.c - interface the zlib procedures for Deflate compression
- * and decompression (as used by gzip) to the PPP code.
- * This version is for use with STREAMS under SunOS 4.x, Solaris 2,
- * SVR4, OSF/1 and AIX 4.x.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-#ifdef AIX4
-#include <net/net_globals.h>
-#endif
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/stream.h>
-#include <net/ppp_defs.h>
-#include "ppp_mod.h"
-
-#define PACKETPTR	mblk_t *
-#include <net/ppp-comp.h>
-
-#ifdef __osf__
-#include "zlib.h"
-#else
-#include "../common/zlib.h"
-#endif
-
-#if DO_DEFLATE
-
-#define DEFLATE_DEBUG	1
-
-/*
- * State for a Deflate (de)compressor.
- */
-struct deflate_state {
-    int		seqno;
-    int		w_size;
-    int		unit;
-    int		hdrlen;
-    int		mru;
-    int		debug;
-    z_stream	strm;
-    struct compstat stats;
-};
-
-#define DEFLATE_OVHD	2		/* Deflate overhead/packet */
-
-static void	*z_alloc __P((void *, u_int items, u_int size));
-static void	*z_alloc_init __P((void *, u_int items, u_int size));
-static void	z_free __P((void *, void *ptr));
-static void	*z_comp_alloc __P((u_char *options, int opt_len));
-static void	*z_decomp_alloc __P((u_char *options, int opt_len));
-static void	z_comp_free __P((void *state));
-static void	z_decomp_free __P((void *state));
-static int	z_comp_init __P((void *state, u_char *options, int opt_len,
-				 int unit, int hdrlen, int debug));
-static int	z_decomp_init __P((void *state, u_char *options, int opt_len,
-				     int unit, int hdrlen, int mru, int debug));
-static int	z_compress __P((void *state, mblk_t **mret,
-				  mblk_t *mp, int slen, int maxolen));
-static void	z_incomp __P((void *state, mblk_t *dmsg));
-static int	z_decompress __P((void *state, mblk_t *cmp,
-				    mblk_t **dmpp));
-static void	z_comp_reset __P((void *state));
-static void	z_decomp_reset __P((void *state));
-static void	z_comp_stats __P((void *state, struct compstat *stats));
-
-/*
- * Procedures exported to ppp_comp.c.
- */
-struct compressor ppp_deflate = {
-    CI_DEFLATE,			/* compress_proto */
-    z_comp_alloc,		/* comp_alloc */
-    z_comp_free,		/* comp_free */
-    z_comp_init,		/* comp_init */
-    z_comp_reset,		/* comp_reset */
-    z_compress,			/* compress */
-    z_comp_stats,		/* comp_stat */
-    z_decomp_alloc,		/* decomp_alloc */
-    z_decomp_free,		/* decomp_free */
-    z_decomp_init,		/* decomp_init */
-    z_decomp_reset,		/* decomp_reset */
-    z_decompress,		/* decompress */
-    z_incomp,			/* incomp */
-    z_comp_stats,		/* decomp_stat */
-};
-
-struct compressor ppp_deflate_draft = {
-    CI_DEFLATE_DRAFT,		/* compress_proto */
-    z_comp_alloc,		/* comp_alloc */
-    z_comp_free,		/* comp_free */
-    z_comp_init,		/* comp_init */
-    z_comp_reset,		/* comp_reset */
-    z_compress,			/* compress */
-    z_comp_stats,		/* comp_stat */
-    z_decomp_alloc,		/* decomp_alloc */
-    z_decomp_free,		/* decomp_free */
-    z_decomp_init,		/* decomp_init */
-    z_decomp_reset,		/* decomp_reset */
-    z_decompress,		/* decompress */
-    z_incomp,			/* incomp */
-    z_comp_stats,		/* decomp_stat */
-};
-
-#define DECOMP_CHUNK	512
-
-/*
- * Space allocation and freeing routines for use by zlib routines.
- */
-struct zchunk {
-    u_int	size;
-    u_int	guard;
-};
-
-#define GUARD_MAGIC	0x77a6011a
-
-static void *
-z_alloc_init(notused, items, size)
-    void *notused;
-    u_int items, size;
-{
-    struct zchunk *z;
-
-    size = items * size + sizeof(struct zchunk);
-#ifdef __osf__
-    z = (struct zchunk *) ALLOC_SLEEP(size);
-#else
-    z = (struct zchunk *) ALLOC_NOSLEEP(size);
-#endif
-    z->size = size;
-    z->guard = GUARD_MAGIC;
-    return (void *) (z + 1);
-}
-
-static void *
-z_alloc(notused, items, size)
-    void *notused;
-    u_int items, size;
-{
-    struct zchunk *z;
-
-    size = items * size + sizeof(struct zchunk);
-    z = (struct zchunk *) ALLOC_NOSLEEP(size);
-    z->size = size;
-    z->guard = GUARD_MAGIC;
-    return (void *) (z + 1);
-}
-
-static void
-z_free(notused, ptr)
-    void *notused;
-    void *ptr;
-{
-    struct zchunk *z = ((struct zchunk *) ptr) - 1;
-
-    if (z->guard != GUARD_MAGIC) {
-	printf("ppp: z_free of corrupted chunk at %x (%x, %x)\n",
-	       z, z->size, z->guard);
-	return;
-    }
-    FREE(z, z->size);
-}
-
-/*
- * Allocate space for a compressor.
- */
-static void *
-z_comp_alloc(options, opt_len)
-    u_char *options;
-    int opt_len;
-{
-    struct deflate_state *state;
-    int w_size;
-
-    if (opt_len != CILEN_DEFLATE
-	|| (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
-	|| options[1] != CILEN_DEFLATE
-	|| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	|| options[3] != DEFLATE_CHK_SEQUENCE)
-	return NULL;
-    w_size = DEFLATE_SIZE(options[2]);
-    /*
-     * N.B. the 9 below should be DEFLATE_MIN_SIZE (8), but using
-     * 8 will cause kernel crashes because of a bug in zlib.
-     */
-    if (w_size < 9 || w_size > DEFLATE_MAX_SIZE)
-	return NULL;
-
-
-#ifdef __osf__
-    state = (struct deflate_state *) ALLOC_SLEEP(sizeof(*state));
-#else
-    state = (struct deflate_state *) ALLOC_NOSLEEP(sizeof(*state));
-#endif
-
-    if (state == NULL)
-	return NULL;
-
-    state->strm.next_in = NULL;
-    state->strm.zalloc = (alloc_func) z_alloc_init;
-    state->strm.zfree = (free_func) z_free;
-    if (deflateInit2(&state->strm, Z_DEFAULT_COMPRESSION, DEFLATE_METHOD_VAL,
-		     -w_size, 8, Z_DEFAULT_STRATEGY) != Z_OK) {
-	FREE(state, sizeof(*state));
-	return NULL;
-    }
-
-    state->strm.zalloc = (alloc_func) z_alloc;
-    state->w_size = w_size;
-    bzero(&state->stats, sizeof(state->stats));
-    return (void *) state;
-}
-
-static void
-z_comp_free(arg)
-    void *arg;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    deflateEnd(&state->strm);
-    FREE(state, sizeof(*state));
-}
-
-static int
-z_comp_init(arg, options, opt_len, unit, hdrlen, debug)
-    void *arg;
-    u_char *options;
-    int opt_len, unit, hdrlen, debug;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    if (opt_len < CILEN_DEFLATE
-	|| (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
-	|| options[1] != CILEN_DEFLATE
-	|| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	|| DEFLATE_SIZE(options[2]) != state->w_size
-	|| options[3] != DEFLATE_CHK_SEQUENCE)
-	return 0;
-
-    state->seqno = 0;
-    state->unit = unit;
-    state->hdrlen = hdrlen;
-    state->debug = debug;
-
-    deflateReset(&state->strm);
-
-    return 1;
-}
-
-static void
-z_comp_reset(arg)
-    void *arg;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    state->seqno = 0;
-    deflateReset(&state->strm);
-}
-
-static int
-z_compress(arg, mret, mp, orig_len, maxolen)
-    void *arg;
-    mblk_t **mret;		/* compressed packet (out) */
-    mblk_t *mp;		/* uncompressed packet (in) */
-    int orig_len, maxolen;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-    u_char *rptr, *wptr;
-    int proto, olen, wspace, r, flush;
-    mblk_t *m;
-
-    /*
-     * Check that the protocol is in the range we handle.
-     */
-    *mret = NULL;
-    rptr = mp->b_rptr;
-    if (rptr + PPP_HDRLEN > mp->b_wptr) {
-	if (!pullupmsg(mp, PPP_HDRLEN))
-	    return 0;
-	rptr = mp->b_rptr;
-    }
-    proto = PPP_PROTOCOL(rptr);
-    if (proto > 0x3fff || proto == 0xfd || proto == 0xfb)
-	return orig_len;
-
-    /* Allocate one mblk initially. */
-    if (maxolen > orig_len)
-	maxolen = orig_len;
-    if (maxolen <= PPP_HDRLEN + 2) {
-	wspace = 0;
-	m = NULL;
-    } else {
-	wspace = maxolen + state->hdrlen;
-	if (wspace > 4096)
-	    wspace = 4096;
-	m = allocb(wspace, BPRI_MED);
-    }
-    if (m != NULL) {
-	*mret = m;
-	if (state->hdrlen + PPP_HDRLEN + 2 < wspace) {
-	    m->b_rptr += state->hdrlen;
-	    m->b_wptr = m->b_rptr;
-	    wspace -= state->hdrlen;
-	}
-	wptr = m->b_wptr;
-
-	/*
-	 * Copy over the PPP header and store the 2-byte sequence number.
-	 */
-	wptr[0] = PPP_ADDRESS(rptr);
-	wptr[1] = PPP_CONTROL(rptr);
-	wptr[2] = PPP_COMP >> 8;
-	wptr[3] = PPP_COMP;
-	wptr += PPP_HDRLEN;
-	wptr[0] = state->seqno >> 8;
-	wptr[1] = state->seqno;
-	wptr += 2;
-	state->strm.next_out = wptr;
-	state->strm.avail_out = wspace - (PPP_HDRLEN + 2);
-    } else {
-	state->strm.next_out = NULL;
-	state->strm.avail_out = 1000000;
-    }
-    ++state->seqno;
-
-    rptr += (proto > 0xff)? 2: 3;	/* skip 1st proto byte if 0 */
-    state->strm.next_in = rptr;
-    state->strm.avail_in = mp->b_wptr - rptr;
-    mp = mp->b_cont;
-    flush = (mp == NULL)? Z_PACKET_FLUSH: Z_NO_FLUSH;
-    olen = 0;
-    for (;;) {
-	r = deflate(&state->strm, flush);
-	if (r != Z_OK) {
-	    printf("z_compress: deflate returned %d (%s)\n",
-		   r, (state->strm.msg? state->strm.msg: ""));
-	    break;
-	}
-	if (flush != Z_NO_FLUSH && state->strm.avail_out != 0)
-	    break;		/* all done */
-	if (state->strm.avail_in == 0 && mp != NULL) {
-	    state->strm.next_in = mp->b_rptr;
-	    state->strm.avail_in = mp->b_wptr - mp->b_rptr;
-	    mp = mp->b_cont;
-	    if (mp == NULL)
-		flush = Z_PACKET_FLUSH;
-	}
-	if (state->strm.avail_out == 0) {
-	    if (m != NULL) {
-		m->b_wptr += wspace;
-		olen += wspace;
-		wspace = maxolen - olen;
-		if (wspace <= 0) {
-		    wspace = 0;
-		    m->b_cont = NULL;
-		} else {
-		    if (wspace < 32)
-			wspace = 32;
-		    else if (wspace > 4096)
-			wspace = 4096;
-		    m->b_cont = allocb(wspace, BPRI_MED);
-		}
-		m = m->b_cont;
-		if (m != NULL) {
-		    state->strm.next_out = m->b_wptr;
-		    state->strm.avail_out = wspace;
-		}
-	    }
-	    if (m == NULL) {
-		state->strm.next_out = NULL;
-		state->strm.avail_out = 1000000;
-	    }
-	}
-    }
-    if (m != NULL) {
-	m->b_wptr += wspace - state->strm.avail_out;
-	olen += wspace - state->strm.avail_out;
-    }
-
-    /*
-     * See if we managed to reduce the size of the packet.
-     */
-    if (olen < orig_len && m != NULL) {
-	state->stats.comp_bytes += olen;
-	state->stats.comp_packets++;
-    } else {
-	if (*mret != NULL) {
-	    freemsg(*mret);
-	    *mret = NULL;
-	}
-	state->stats.inc_bytes += orig_len;
-	state->stats.inc_packets++;
-	olen = orig_len;
-    }
-    state->stats.unc_bytes += orig_len;
-    state->stats.unc_packets++;
-
-    return olen;
-}
-
-static void
-z_comp_stats(arg, stats)
-    void *arg;
-    struct compstat *stats;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-    u_int out;
-
-    *stats = state->stats;
-    stats->ratio = stats->unc_bytes;
-    out = stats->comp_bytes + stats->unc_bytes;
-    if (stats->ratio <= 0x7ffffff)
-	stats->ratio <<= 8;
-    else
-	out >>= 8;
-    if (out != 0)
-	stats->ratio /= out;
-}
-
-/*
- * Allocate space for a decompressor.
- */
-static void *
-z_decomp_alloc(options, opt_len)
-    u_char *options;
-    int opt_len;
-{
-    struct deflate_state *state;
-    int w_size;
-
-    if (opt_len != CILEN_DEFLATE
-	|| (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
-	|| options[1] != CILEN_DEFLATE
-	|| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	|| options[3] != DEFLATE_CHK_SEQUENCE)
-	return NULL;
-    w_size = DEFLATE_SIZE(options[2]);
-    /*
-     * N.B. the 9 below should be DEFLATE_MIN_SIZE (8), but using
-     * 8 will cause kernel crashes because of a bug in zlib.
-     */
-    if (w_size < 9 || w_size > DEFLATE_MAX_SIZE)
-	return NULL;
-
-#ifdef __osf__
-    state = (struct deflate_state *) ALLOC_SLEEP(sizeof(*state));
-#else
-    state = (struct deflate_state *) ALLOC_NOSLEEP(sizeof(*state));
-#endif
-    if (state == NULL)
-	return NULL;
-
-    state->strm.next_out = NULL;
-    state->strm.zalloc = (alloc_func) z_alloc_init;
-    state->strm.zfree = (free_func) z_free;
-    if (inflateInit2(&state->strm, -w_size) != Z_OK) {
-	FREE(state, sizeof(*state));
-	return NULL;
-    }
-
-    state->strm.zalloc = (alloc_func) z_alloc;
-    state->w_size = w_size;
-    bzero(&state->stats, sizeof(state->stats));
-    return (void *) state;
-}
-
-static void
-z_decomp_free(arg)
-    void *arg;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    inflateEnd(&state->strm);
-    FREE(state, sizeof(*state));
-}
-
-static int
-z_decomp_init(arg, options, opt_len, unit, hdrlen, mru, debug)
-    void *arg;
-    u_char *options;
-    int opt_len, unit, hdrlen, mru, debug;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    if (opt_len < CILEN_DEFLATE
-	|| (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
-	|| options[1] != CILEN_DEFLATE
-	|| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	|| DEFLATE_SIZE(options[2]) != state->w_size
-	|| options[3] != DEFLATE_CHK_SEQUENCE)
-	return 0;
-
-    state->seqno = 0;
-    state->unit = unit;
-    state->hdrlen = hdrlen;
-    state->debug = debug;
-    state->mru = mru;
-
-    inflateReset(&state->strm);
-
-    return 1;
-}
-
-static void
-z_decomp_reset(arg)
-    void *arg;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    state->seqno = 0;
-    inflateReset(&state->strm);
-}
-
-/*
- * Decompress a Deflate-compressed packet.
- *
- * Because of patent problems, we return DECOMP_ERROR for errors
- * found by inspecting the input data and for system problems, but
- * DECOMP_FATALERROR for any errors which could possibly be said to
- * be being detected "after" decompression.  For DECOMP_ERROR,
- * we can issue a CCP reset-request; for DECOMP_FATALERROR, we may be
- * infringing a patent of Motorola's if we do, so we take CCP down
- * instead.
- *
- * Given that the frame has the correct sequence number and a good FCS,
- * errors such as invalid codes in the input most likely indicate a
- * bug, so we return DECOMP_FATALERROR for them in order to turn off
- * compression, even though they are detected by inspecting the input.
- */
-static int
-z_decompress(arg, mi, mop)
-    void *arg;
-    mblk_t *mi, **mop;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-    mblk_t *mo, *mo_head;
-    u_char *rptr, *wptr;
-    int rlen, olen, ospace;
-    int seq, i, flush, r, decode_proto;
-    u_char hdr[PPP_HDRLEN + DEFLATE_OVHD];
-
-    *mop = NULL;
-    rptr = mi->b_rptr;
-    for (i = 0; i < PPP_HDRLEN + DEFLATE_OVHD; ++i) {
-	while (rptr >= mi->b_wptr) {
-	    mi = mi->b_cont;
-	    if (mi == NULL)
-		return DECOMP_ERROR;
-	    rptr = mi->b_rptr;
-	}
-	hdr[i] = *rptr++;
-    }
-
-    /* Check the sequence number. */
-    seq = (hdr[PPP_HDRLEN] << 8) + hdr[PPP_HDRLEN+1];
-    if (seq != state->seqno) {
-#if !DEFLATE_DEBUG
-	if (state->debug)
-#endif
-	    printf("z_decompress%d: bad seq # %d, expected %d\n",
-		   state->unit, seq, state->seqno);
-	return DECOMP_ERROR;
-    }
-    ++state->seqno;
-
-    /* Allocate an output message block. */
-    mo = allocb(DECOMP_CHUNK + state->hdrlen, BPRI_MED);
-    if (mo == NULL)
-	return DECOMP_ERROR;
-    mo_head = mo;
-    mo->b_cont = NULL;
-    mo->b_rptr += state->hdrlen;
-    mo->b_wptr = wptr = mo->b_rptr;
-    ospace = DECOMP_CHUNK;
-    olen = 0;
-
-    /*
-     * Fill in the first part of the PPP header.  The protocol field
-     * comes from the decompressed data.
-     */
-    wptr[0] = PPP_ADDRESS(hdr);
-    wptr[1] = PPP_CONTROL(hdr);
-    wptr[2] = 0;
-
-    /*
-     * Set up to call inflate.  We set avail_out to 1 initially so we can
-     * look at the first byte of the output and decide whether we have
-     * a 1-byte or 2-byte protocol field.
-     */
-    state->strm.next_in = rptr;
-    state->strm.avail_in = mi->b_wptr - rptr;
-    mi = mi->b_cont;
-    flush = (mi == NULL)? Z_PACKET_FLUSH: Z_NO_FLUSH;
-    rlen = state->strm.avail_in + PPP_HDRLEN + DEFLATE_OVHD;
-    state->strm.next_out = wptr + 3;
-    state->strm.avail_out = 1;
-    decode_proto = 1;
-
-    /*
-     * Call inflate, supplying more input or output as needed.
-     */
-    for (;;) {
-	r = inflate(&state->strm, flush);
-	if (r != Z_OK) {
-#if !DEFLATE_DEBUG
-	    if (state->debug)
-#endif
-		printf("z_decompress%d: inflate returned %d (%s)\n",
-		       state->unit, r, (state->strm.msg? state->strm.msg: ""));
-	    freemsg(mo_head);
-	    return DECOMP_FATALERROR;
-	}
-	if (flush != Z_NO_FLUSH && state->strm.avail_out != 0)
-	    break;		/* all done */
-	if (state->strm.avail_in == 0 && mi != NULL) {
-	    state->strm.next_in = mi->b_rptr;
-	    state->strm.avail_in = mi->b_wptr - mi->b_rptr;
-	    rlen += state->strm.avail_in;
-	    mi = mi->b_cont;
-	    if (mi == NULL)
-		flush = Z_PACKET_FLUSH;
-	}
-	if (state->strm.avail_out == 0) {
-	    if (decode_proto) {
-		state->strm.avail_out = ospace - PPP_HDRLEN;
-		if ((wptr[3] & 1) == 0) {
-		    /* 2-byte protocol field */
-		    wptr[2] = wptr[3];
-		    --state->strm.next_out;
-		    ++state->strm.avail_out;
-		}
-		decode_proto = 0;
-	    } else {
-		mo->b_wptr += ospace;
-		olen += ospace;
-		mo->b_cont = allocb(DECOMP_CHUNK, BPRI_MED);
-		mo = mo->b_cont;
-		if (mo == NULL) {
-		    freemsg(mo_head);
-		    return DECOMP_ERROR;
-		}
-		state->strm.next_out = mo->b_rptr;
-		state->strm.avail_out = ospace = DECOMP_CHUNK;
-	    }
-	}
-    }
-    if (decode_proto) {
-	freemsg(mo_head);
-	return DECOMP_ERROR;
-    }
-    mo->b_wptr += ospace - state->strm.avail_out;
-    olen += ospace - state->strm.avail_out;
-
-#if DEFLATE_DEBUG
-    if (olen > state->mru + PPP_HDRLEN)
-	printf("ppp_deflate%d: exceeded mru (%d > %d)\n",
-	       state->unit, olen, state->mru + PPP_HDRLEN);
-#endif
-
-    state->stats.unc_bytes += olen;
-    state->stats.unc_packets++;
-    state->stats.comp_bytes += rlen;
-    state->stats.comp_packets++;
-
-    *mop = mo_head;
-    return DECOMP_OK;
-}
-
-/*
- * Incompressible data has arrived - add it to the history.
- */
-static void
-z_incomp(arg, mi)
-    void *arg;
-    mblk_t *mi;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-    u_char *rptr;
-    int rlen, proto, r;
-
-    /*
-     * Check that the protocol is one we handle.
-     */
-    rptr = mi->b_rptr;
-    if (rptr + PPP_HDRLEN > mi->b_wptr) {
-	if (!pullupmsg(mi, PPP_HDRLEN))
-	    return;
-	rptr = mi->b_rptr;
-    }
-    proto = PPP_PROTOCOL(rptr);
-    if (proto > 0x3fff || proto == 0xfd || proto == 0xfb)
-	return;
-
-    ++state->seqno;
-
-    /*
-     * Iterate through the message blocks, adding the characters in them
-     * to the decompressor's history.  For the first block, we start
-     * at the either the 1st or 2nd byte of the protocol field,
-     * depending on whether the protocol value is compressible.
-     */
-    rlen = mi->b_wptr - mi->b_rptr;
-    state->strm.next_in = rptr + 3;
-    state->strm.avail_in = rlen - 3;
-    if (proto > 0xff) {
-	--state->strm.next_in;
-	++state->strm.avail_in;
-    }
-    for (;;) {
-	r = inflateIncomp(&state->strm);
-	if (r != Z_OK) {
-	    /* gak! */
-#if !DEFLATE_DEBUG
-	    if (state->debug)
-#endif
-		printf("z_incomp%d: inflateIncomp returned %d (%s)\n",
-		       state->unit, r, (state->strm.msg? state->strm.msg: ""));
-	    return;
-	}
-	mi = mi->b_cont;
-	if (mi == NULL)
-	    break;
-	state->strm.next_in = mi->b_rptr;
-	state->strm.avail_in = mi->b_wptr - mi->b_rptr;
-	rlen += state->strm.avail_in;
-    }
-
-    /*
-     * Update stats.
-     */
-    state->stats.inc_bytes += rlen;
-    state->stats.inc_packets++;
-    state->stats.unc_bytes += rlen;
-    state->stats.unc_packets++;
-}
-
-#endif /* DO_DEFLATE */
diff --git a/mdk-stage1/ppp/modules/if_ppp.c b/mdk-stage1/ppp/modules/if_ppp.c
deleted file mode 100644
index 14e89eb4a..000000000
--- a/mdk-stage1/ppp/modules/if_ppp.c
+++ /dev/null
@@ -1,865 +0,0 @@
-/*
- * if_ppp.c - a network interface connected to a STREAMS module.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under SunOS 4 and Digital UNIX.
- *
- * This file provides the glue between PPP and IP.
- */
-
-#define INET	1
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/errno.h>
-#include <sys/mbuf.h>
-#include <sys/socket.h>
-#include <net/if.h>
-#include <net/netisr.h>
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include <netinet/in.h>
-#include <netinet/in_var.h>
-#ifdef __osf__
-#include <sys/ioctl.h>
-#include <net/if_types.h>
-#else
-#include <sys/sockio.h>
-#endif
-#include "ppp_mod.h"
-
-#include <sys/stream.h>
-
-#ifdef SNIT_SUPPORT
-#include <sys/time.h>
-#include <net/nit_if.h>
-#include <netinet/if_ether.h>
-#endif
-
-#ifdef __osf__
-#define SIOCSIFMTU SIOCSIPMTU
-#define SIOCGIFMTU SIOCRIPMTU
-#define IFA_ADDR(ifa)   (*(ifa)->ifa_addr)
-#else
-#define IFA_ADDR(ifa)   ((ifa)->ifa_addr)
-#endif
-
-#define ifr_mtu		ifr_metric
-
-static int if_ppp_open __P((queue_t *, int, int, int));
-static int if_ppp_close __P((queue_t *, int));
-static int if_ppp_wput __P((queue_t *, mblk_t *));
-static int if_ppp_rput __P((queue_t *, mblk_t *));
-
-#define PPP_IF_ID 0x8021
-static struct module_info minfo = {
-    PPP_IF_ID, "if_ppp", 0, INFPSZ, 4096, 128
-};
-
-static struct qinit rinit = {
-    if_ppp_rput, NULL, if_ppp_open, if_ppp_close, NULL, &minfo, NULL
-};
-
-static struct qinit winit = {
-    if_ppp_wput, NULL, NULL, NULL, NULL, &minfo, NULL
-};
-
-struct streamtab if_pppinfo = {
-    &rinit, &winit, NULL, NULL
-};
-
-typedef struct if_ppp_state {
-    int unit;
-    queue_t *q;
-    int flags;
-} if_ppp_t;
-
-/* Values for flags */
-#define DBGLOG		1
-
-static int if_ppp_count;	/* Number of currently-active streams */
-
-static int ppp_nalloc;		/* Number of elements of ifs and states */
-static struct ifnet **ifs;	/* Array of pointers to interface structs */
-static if_ppp_t **states;	/* Array of pointers to state structs */
-
-static int if_ppp_output __P((struct ifnet *, struct mbuf *,
-			      struct sockaddr *));
-static int if_ppp_ioctl __P((struct ifnet *, u_int, caddr_t));
-static struct mbuf *make_mbufs __P((mblk_t *, int));
-static mblk_t *make_message __P((struct mbuf *, int));
-
-#ifdef SNIT_SUPPORT
-/* Fake ether header for SNIT */
-static struct ether_header snit_ehdr = {{0}, {0}, ETHERTYPE_IP};
-#endif
-
-#ifndef __osf__
-static void ppp_if_detach __P((struct ifnet *));
-
-/*
- * Detach all the interfaces before unloading.
- * Not sure this works.
- */
-int
-if_ppp_unload()
-{
-    int i;
-
-    if (if_ppp_count > 0)
-	return EBUSY;
-    for (i = 0; i < ppp_nalloc; ++i)
-	if (ifs[i] != 0)
-	    ppp_if_detach(ifs[i]);
-    if (ifs) {
-	FREE(ifs, ppp_nalloc * sizeof (struct ifnet *));
-	FREE(states, ppp_nalloc * sizeof (struct if_ppp_t *));
-    }
-    ppp_nalloc = 0;
-    return 0;
-}
-#endif /* __osf__ */
-
-/*
- * STREAMS module entry points.
- */
-static int
-if_ppp_open(q, dev, flag, sflag)
-    queue_t *q;
-    int dev;
-    int flag, sflag;
-{
-    if_ppp_t *sp;
-
-    if (q->q_ptr == 0) {
-	sp = (if_ppp_t *) ALLOC_SLEEP(sizeof (if_ppp_t));
-	if (sp == 0)
-	    return OPENFAIL;
-	bzero(sp, sizeof (if_ppp_t));
-	q->q_ptr = (caddr_t) sp;
-	WR(q)->q_ptr = (caddr_t) sp;
-	sp->unit = -1;		/* no interface unit attached at present */
-	sp->q = WR(q);
-	sp->flags = 0;
-	++if_ppp_count;
-    }
-    return 0;
-}
-
-static int
-if_ppp_close(q, flag)
-    queue_t *q;
-    int flag;
-{
-    if_ppp_t *sp;
-    struct ifnet *ifp;
-
-    sp = (if_ppp_t *) q->q_ptr;
-    if (sp != 0) {
-	if (sp->flags & DBGLOG)
-	    printf("if_ppp closed, q=%x sp=%x\n", q, sp);
-	if (sp->unit >= 0) {
-	    if (sp->unit < ppp_nalloc) {
-		states[sp->unit] = 0;
-		ifp = ifs[sp->unit];
-		if (ifp != 0)
-		    ifp->if_flags &= ~(IFF_UP | IFF_RUNNING);
-#ifdef DEBUG
-	    } else {
-		printf("if_ppp: unit %d nonexistent!\n", sp->unit);
-#endif
-	    }
-	}
-	FREE(sp, sizeof (if_ppp_t));
-	--if_ppp_count;
-    }
-    return 0;
-}
-
-static int
-if_ppp_wput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    if_ppp_t *sp;
-    struct iocblk *iop;
-    int error, unit;
-    struct ifnet *ifp;
-
-    sp = (if_ppp_t *) q->q_ptr;
-    switch (mp->b_datap->db_type) {
-    case M_DATA:
-	/*
-	 * Now why would we be getting data coming in here??
-	 */
-	if (sp->flags & DBGLOG)
-	    printf("if_ppp: got M_DATA len=%d\n", msgdsize(mp));
-	freemsg(mp);
-	break;
-
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	error = EINVAL;
-
-	if (sp->flags & DBGLOG)
-	    printf("if_ppp: got ioctl cmd=%x count=%d\n",
-		   iop->ioc_cmd, iop->ioc_count);
-
-	switch (iop->ioc_cmd) {
-	case PPPIO_NEWPPA:		/* well almost */
-	    if (iop->ioc_count != sizeof(int) || sp->unit >= 0)
-		break;
-	    if ((error = NOTSUSER()) != 0)
-		break;
-	    unit = *(int *)mp->b_cont->b_rptr;
-
-	    /* Check that this unit isn't already in use */
-	    if (unit < ppp_nalloc && states[unit] != 0) {
-		error = EADDRINUSE;
-		break;
-	    }
-
-	    /* Extend ifs and states arrays if necessary. */
-	    error = ENOSR;
-	    if (unit >= ppp_nalloc) {
-		int newn;
-		struct ifnet **newifs;
-		if_ppp_t **newstates;
-
-		newn = unit + 4;
-		if (sp->flags & DBGLOG)
-		    printf("if_ppp: extending ifs to %d\n", newn);
-		newifs = (struct ifnet **)
-		    ALLOC_NOSLEEP(newn * sizeof (struct ifnet *));
-		if (newifs == 0)
-		    break;
-		bzero(newifs, newn * sizeof (struct ifnet *));
-		newstates = (if_ppp_t **)
-		    ALLOC_NOSLEEP(newn * sizeof (struct if_ppp_t *));
-		if (newstates == 0) {
-		    FREE(newifs, newn * sizeof (struct ifnet *));
-		    break;
-		}
-		bzero(newstates, newn * sizeof (struct if_ppp_t *));
-		bcopy(ifs, newifs, ppp_nalloc * sizeof(struct ifnet *));
-		bcopy(states, newstates, ppp_nalloc * sizeof(if_ppp_t *));
-		if (ifs) {
-		    FREE(ifs, ppp_nalloc * sizeof(struct ifnet *));
-		    FREE(states, ppp_nalloc * sizeof(if_ppp_t *));
-		}
-		ifs = newifs;
-		states = newstates;
-		ppp_nalloc = newn;
-	    }
-
-	    /* Allocate a new ifnet struct if necessary. */
-	    ifp = ifs[unit];
-	    if (ifp == 0) {
-		ifp = (struct ifnet *) ALLOC_NOSLEEP(sizeof (struct ifnet));
-		if (ifp == 0)
-		    break;
-		bzero(ifp, sizeof (struct ifnet));
-		ifs[unit] = ifp;
-		ifp->if_name = "ppp";
-		ifp->if_unit = unit;
-		ifp->if_mtu = PPP_MTU;
-		ifp->if_flags = IFF_POINTOPOINT | IFF_RUNNING;
-#ifndef __osf__
-#ifdef IFF_MULTICAST
-		ifp->if_flags |= IFF_MULTICAST;
-#endif
-#endif /* __osf__ */
-		ifp->if_output = if_ppp_output;
-#ifdef __osf__
-		ifp->if_version = "Point-to-Point Protocol, version 2.3.11";
-		ifp->if_mediamtu = PPP_MTU;
-		ifp->if_type = IFT_PPP;
-		ifp->if_hdrlen = PPP_HDRLEN;
-		ifp->if_addrlen = 0;
-		ifp->if_flags |= IFF_NOARP | IFF_SIMPLEX | IFF_NOTRAILERS;
-#ifdef IFF_VAR_MTU
-		ifp->if_flags |= IFF_VAR_MTU;
-#endif
-#ifdef NETMASTERCPU
-		ifp->if_affinity = NETMASTERCPU;
-#endif
-#endif
-		ifp->if_ioctl = if_ppp_ioctl;
-		ifp->if_snd.ifq_maxlen = IFQ_MAXLEN;
-		if_attach(ifp);
-		if (sp->flags & DBGLOG)
-		    printf("if_ppp: created unit %d\n", unit);
-	    } else {
-		ifp->if_mtu = PPP_MTU;
-		ifp->if_flags |= IFF_RUNNING;
-	    }
-
-	    states[unit] = sp;
-	    sp->unit = unit;
-
-	    error = 0;
-	    iop->ioc_count = 0;
-	    if (sp->flags & DBGLOG)
-		printf("if_ppp: attached unit %d, sp=%x q=%x\n", unit,
-		       sp, sp->q);
-	    break;
-
-	case PPPIO_DEBUG:
-	    error = -1;
-	    if (iop->ioc_count == sizeof(int)) {
-		if (*(int *)mp->b_cont->b_rptr == PPPDBG_LOG + PPPDBG_IF) {
-		    printf("if_ppp: debug log enabled, q=%x sp=%x\n", q, sp);
-		    sp->flags |= DBGLOG;
-		    error = 0;
-		    iop->ioc_count = 0;
-		}
-	    }
-	    break;
-
-	default:
-	    error = -1;
-	    break;
-	}
-
-	if (sp->flags & DBGLOG)
-	    printf("if_ppp: ioctl result %d\n", error);
-	if (error < 0)
-	    putnext(q, mp);
-	else if (error == 0) {
-	    mp->b_datap->db_type = M_IOCACK;
-	    qreply(q, mp);
-	} else {
-	    mp->b_datap->db_type = M_IOCNAK;
-	    iop->ioc_count = 0;
-	    iop->ioc_error = error;
-	    qreply(q, mp);
-	}
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-    return 0;
-}
-
-static int
-if_ppp_rput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    if_ppp_t *sp;
-    int proto, s;
-    struct mbuf *mb;
-    struct ifqueue *inq;
-    struct ifnet *ifp;
-    int len;
-
-    sp = (if_ppp_t *) q->q_ptr;
-    switch (mp->b_datap->db_type) {
-    case M_DATA:
-	/*
-	 * Convert the message into an mbuf chain
-	 * and inject it into the network code.
-	 */
-	if (sp->flags & DBGLOG)
-	    printf("if_ppp: rput pkt len %d data %x %x %x %x %x %x %x %x\n",
-		   msgdsize(mp), mp->b_rptr[0], mp->b_rptr[1], mp->b_rptr[2],
-		   mp->b_rptr[3], mp->b_rptr[4], mp->b_rptr[5], mp->b_rptr[6],
-		   mp->b_rptr[7]);
-
-	if (sp->unit < 0) {
-	    freemsg(mp);
-	    break;
-	}
-	if (sp->unit >= ppp_nalloc || (ifp = ifs[sp->unit]) == 0) {
-#ifdef DEBUG
-	    printf("if_ppp: no unit %d!\n", sp->unit);
-#endif
-	    freemsg(mp);
-	    break;
-	}
-
-	if ((ifp->if_flags & IFF_UP) == 0) {
-	    freemsg(mp);
-	    break;
-	}
-	++ifp->if_ipackets;
-
-	proto = PPP_PROTOCOL(mp->b_rptr);
-	adjmsg(mp, PPP_HDRLEN);
-	len = msgdsize(mp);
-	mb = make_mbufs(mp, sizeof(struct ifnet *));
-	freemsg(mp);
-	if (mb == NULL) {
-	    if (sp->flags & DBGLOG)
-		printf("if_ppp%d: make_mbufs failed\n", ifp->if_unit);
-	    ++ifp->if_ierrors;
-	    break;
-	}
-
-#ifdef SNIT_SUPPORT
-	if (proto == PPP_IP && (ifp->if_flags & IFF_PROMISC)) {
-	    struct nit_if nif;
-
-	    nif.nif_header = (caddr_t) &snit_ehdr;
-	    nif.nif_hdrlen = sizeof(snit_ehdr);
-	    nif.nif_bodylen = len;
-	    nif.nif_promisc = 0;
-	    snit_intr(ifp, mb, &nif);
-	}
-#endif
-
-/*
- * For Digital UNIX, there's space set aside in the header mbuf
- * for the interface info.
- *
- * For Sun it's smuggled around via a pointer at the front of the mbuf.
- */
-#ifdef __osf__
-        mb->m_pkthdr.rcvif = ifp;
-        mb->m_pkthdr.len = len;
-#else
-	mb->m_off -= sizeof(struct ifnet *);
-	mb->m_len += sizeof(struct ifnet *);
-	*mtod(mb, struct ifnet **) = ifp;
-#endif
-
-	inq = 0;
-	switch (proto) {
-	case PPP_IP:
-	    inq = &ipintrq;
-	    schednetisr(NETISR_IP);
-	}
-
-	if (inq != 0) {
-	    s = splhigh();
-	    if (IF_QFULL(inq)) {
-		IF_DROP(inq);
-		++ifp->if_ierrors;
-		if (sp->flags & DBGLOG)
-		    printf("if_ppp: inq full, proto=%x\n", proto);
-		m_freem(mb);
-	    } else {
-		IF_ENQUEUE(inq, mb);
-	    }
-	    splx(s);
-	} else {
-	    if (sp->flags & DBGLOG)
-		printf("if_ppp%d: proto=%x?\n", ifp->if_unit, proto);
-	    ++ifp->if_ierrors;
-	    m_freem(mb);
-	}
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-    return 0;
-}
-
-/*
- * Network code wants to output a packet.
- * Turn it into a STREAMS message and send it down.
- */
-static int
-if_ppp_output(ifp, m0, dst)
-    struct ifnet *ifp;
-    struct mbuf *m0;
-    struct sockaddr *dst;
-{
-    mblk_t *mp;
-    int proto, s;
-    if_ppp_t *sp;
-    u_char *p;
-
-    if ((ifp->if_flags & IFF_UP) == 0) {
-	m_freem(m0);
-	return ENETDOWN;
-    }
-
-    if ((unsigned)ifp->if_unit >= ppp_nalloc) {
-#ifdef DEBUG
-	printf("if_ppp_output: unit %d?\n", ifp->if_unit);
-#endif
-	m_freem(m0);
-	return EINVAL;
-    }
-    sp = states[ifp->if_unit];
-    if (sp == 0) {
-#ifdef DEBUG
-	printf("if_ppp_output: no queue?\n");
-#endif
-	m_freem(m0);
-	return ENETDOWN;
-    }
-
-    if (sp->flags & DBGLOG) {
-	p = mtod(m0, u_char *);
-	printf("if_ppp_output%d: af=%d data=%x %x %x %x %x %x %x %x q=%x\n",
-	       ifp->if_unit, dst->sa_family, p[0], p[1], p[2], p[3], p[4],
-	       p[5], p[6], p[7], sp->q);
-    }
-
-    switch (dst->sa_family) {
-    case AF_INET:
-	proto = PPP_IP;
-#ifdef SNIT_SUPPORT
-	if (ifp->if_flags & IFF_PROMISC) {
-	    struct nit_if nif;
-	    struct mbuf *m;
-	    int len;
-
-	    for (len = 0, m = m0; m != NULL; m = m->m_next)
-		len += m->m_len;
-	    nif.nif_header = (caddr_t) &snit_ehdr;
-	    nif.nif_hdrlen = sizeof(snit_ehdr);
-	    nif.nif_bodylen = len;
-	    nif.nif_promisc = 0;
-	    snit_intr(ifp, m0, &nif);
-	}
-#endif
-	break;
-
-    default:
-	m_freem(m0);
-	return EAFNOSUPPORT;
-    }
-
-    ++ifp->if_opackets;
-    mp = make_message(m0, PPP_HDRLEN);
-    m_freem(m0);
-    if (mp == 0) {
-	++ifp->if_oerrors;
-	return ENOBUFS;
-    }
-    mp->b_rptr -= PPP_HDRLEN;
-    mp->b_rptr[0] = PPP_ALLSTATIONS;
-    mp->b_rptr[1] = PPP_UI;
-    mp->b_rptr[2] = proto >> 8;
-    mp->b_rptr[3] = proto;
-
-    s = splstr();
-    if (sp->flags & DBGLOG)
-	printf("if_ppp: putnext(%x, %x), r=%x w=%x p=%x\n",
-	       sp->q, mp, mp->b_rptr, mp->b_wptr, proto);
-    putnext(sp->q, mp);
-    splx(s);
-
-    return 0;
-}
-
-/*
- * Socket ioctl routine for ppp interfaces.
- */
-static int
-if_ppp_ioctl(ifp, cmd, data)
-    struct ifnet *ifp;
-    u_int cmd;
-    caddr_t data;
-{
-    int s, error;
-    struct ifreq *ifr = (struct ifreq *) data;
-    struct ifaddr *ifa = (struct ifaddr *) data;
-    u_short mtu;
-
-    error = 0;
-    s = splimp();
-    switch (cmd) {
-    case SIOCSIFFLAGS:
-	if ((ifp->if_flags & IFF_RUNNING) == 0)
-	    ifp->if_flags &= ~IFF_UP;
-	break;
-
-    case SIOCSIFADDR:
-	if (IFA_ADDR(ifa).sa_family != AF_INET)
-	    error = EAFNOSUPPORT;
-	break;
-
-    case SIOCSIFDSTADDR:
-	if (IFA_ADDR(ifa).sa_family != AF_INET)
-	    error = EAFNOSUPPORT;
-	break;
-
-    case SIOCSIFMTU:
-	if ((error = NOTSUSER()) != 0)
-	    break;
-#ifdef __osf__
-	/* this hack is necessary because ifioctl checks ifr_data
-	 * in 4.0 and 5.0, but ifr_data and ifr_metric overlay each 
-	 * other in the definition of struct ifreq so pppd can't set both.
-	 */
-        bcopy(ifr->ifr_data, &mtu, sizeof (u_short));
-        ifr->ifr_mtu = mtu;
-#endif
-
-	if (ifr->ifr_mtu < PPP_MINMTU || ifr->ifr_mtu > PPP_MAXMTU) {
-	    error = EINVAL;
-	    break;
-	}
-	ifp->if_mtu = ifr->ifr_mtu;
-	break;
-
-    case SIOCGIFMTU:
-	ifr->ifr_mtu = ifp->if_mtu;
-	break;
-
-    case SIOCADDMULTI:
-    case SIOCDELMULTI:
-	switch(ifr->ifr_addr.sa_family) {
-	case AF_INET:
-	    break;
-	default:
-	    error = EAFNOSUPPORT;
-	    break;
-	}
-	break;
-
-    default:
-	error = EINVAL;
-    }
-    splx(s);
-    return (error);
-}
-
-/*
- * Turn a STREAMS message into an mbuf chain.
- */
-static struct mbuf *
-make_mbufs(mp, off)
-    mblk_t *mp;
-    int off;
-{
-    struct mbuf *head, **prevp, *m;
-    int len, space, n;
-    unsigned char *cp, *dp;
-
-    len = msgdsize(mp);
-    if (len == 0)
-	return 0;
-    prevp = &head;
-    space = 0;
-    cp = mp->b_rptr;
-#ifdef __osf__
-    MGETHDR(m, M_DONTWAIT, MT_DATA);
-    m->m_len = 0;
-    space = MHLEN;
-    *prevp = m;
-    prevp = &m->m_next;
-    dp = mtod(m, unsigned char *);
-    len -= space;
-    off = 0;
-#endif
-    for (;;) {
-	while (cp >= mp->b_wptr) {
-	    mp = mp->b_cont;
-	    if (mp == 0) {
-		*prevp = 0;
-		return head;
-	    }
-	    cp = mp->b_rptr;
-	}
-	n = mp->b_wptr - cp;
-	if (space == 0) {
-	    MGET(m, M_DONTWAIT, MT_DATA);
-	    *prevp = m;
-	    if (m == 0) {
-		if (head != 0)
-		    m_freem(head);
-		return 0;
-	    }
-	    if (len + off > 2 * MLEN) {
-#ifdef __osf__
-		MCLGET(m, M_DONTWAIT);
-#else
-		MCLGET(m);
-#endif
-	    }
-#ifdef __osf__
-	    space = ((m->m_flags & M_EXT) ? MCLBYTES : MLEN);
-#else
-	    space = (m->m_off > MMAXOFF? MCLBYTES: MLEN) - off;
-	    m->m_off += off;
-#endif
-	    m->m_len = 0;
-	    len -= space;
-	    dp = mtod(m, unsigned char *);
-	    off = 0;
-	    prevp = &m->m_next;
-	}
-	if (n > space)
-	    n = space;
-	bcopy(cp, dp, n);
-	cp += n;
-	dp += n;
-	space -= n;
-	m->m_len += n;
-    }
-}
-
-/*
- * Turn an mbuf chain into a STREAMS message.
- */
-#define ALLOCB_MAX	4096
-
-static mblk_t *
-make_message(m, off)
-    struct mbuf *m;
-    int off;
-{
-    mblk_t *head, **prevp, *mp;
-    int len, space, n, nb;
-    unsigned char *cp, *dp;
-    struct mbuf *nm;
-
-    len = 0;
-    for (nm = m; nm != 0; nm = nm->m_next)
-	len += nm->m_len;
-    prevp = &head;
-    space = 0;
-    cp = mtod(m, unsigned char *);
-    nb = m->m_len;
-    for (;;) {
-	while (nb <= 0) {
-	    m = m->m_next;
-	    if (m == 0) {
-		*prevp = 0;
-		return head;
-	    }
-	    cp = mtod(m, unsigned char *);
-	    nb = m->m_len;
-	}
-	if (space == 0) {
-	    space = len + off;
-	    if (space > ALLOCB_MAX)
-		space = ALLOCB_MAX;
-	    mp = allocb(space, BPRI_LO);
-	    *prevp = mp;
-	    if (mp == 0) {
-		if (head != 0)
-		    freemsg(head);
-		return 0;
-	    }
-	    dp = mp->b_rptr += off;
-	    space -= off;
-	    len -= space;
-	    off = 0;
-	    prevp = &mp->b_cont;
-	}
-	n = nb < space? nb: space;
-	bcopy(cp, dp, n);
-	cp += n;
-	dp += n;
-	nb -= n;
-	space -= n;
-	mp->b_wptr = dp;
-    }
-}
-
-/*
- * Digital UNIX doesn't allow for removing ifnet structures
- * from the list.  But then we're not using this as a loadable
- * module anyway, so that's OK.
- *
- * Under SunOS, this should allow the module to be unloaded.
- * Unfortunately, it doesn't seem to detach all the references,
- * so your system may well crash after you unload this module :-(
- */
-#ifndef __osf__
-
-/*
- * Remove an interface from the system.
- * This routine contains magic.
- */
-#include <net/route.h>
-#include <netinet/in_pcb.h>
-#include <netinet/ip_var.h>
-#include <netinet/tcp.h>
-#include <netinet/tcp_timer.h>
-#include <netinet/tcp_var.h>
-#include <netinet/udp.h>
-#include <netinet/udp_var.h>
-
-static void
-ppp_if_detach(ifp)
-    struct ifnet *ifp;
-{
-    int s;
-    struct inpcb *pcb;
-    struct ifaddr *ifa;
-    struct in_ifaddr **inap;
-    struct ifnet **ifpp;
-
-    s = splhigh();
-
-    /*
-     * Clear the interface from any routes currently cached in
-     * TCP or UDP protocol control blocks.
-     */
-    for (pcb = tcb.inp_next; pcb != &tcb; pcb = pcb->inp_next)
-	if (pcb->inp_route.ro_rt && pcb->inp_route.ro_rt->rt_ifp == ifp)
-	    in_losing(pcb);
-    for (pcb = udb.inp_next; pcb != &udb; pcb = pcb->inp_next)
-	if (pcb->inp_route.ro_rt && pcb->inp_route.ro_rt->rt_ifp == ifp)
-	    in_losing(pcb);
-
-    /*
-     * Delete routes through all addresses of the interface.
-     */
-    for (ifa = ifp->if_addrlist; ifa != 0; ifa = ifa->ifa_next) {
-	rtinit(ifa, ifa, SIOCDELRT, RTF_HOST);
-	rtinit(ifa, ifa, SIOCDELRT, 0);
-    }
-
-    /*
-     * Unlink the interface's address(es) from the in_ifaddr list.
-     */
-    for (inap = &in_ifaddr; *inap != 0; ) {
-	if ((*inap)->ia_ifa.ifa_ifp == ifp)
-	    *inap = (*inap)->ia_next;
-	else
-	    inap = &(*inap)->ia_next;
-    }
-
-    /*
-     * Delete the interface from the ifnet list.
-     */
-    for (ifpp = &ifnet; (*ifpp) != 0; ) {
-	if (*ifpp == ifp)
-	    break;
-	ifpp = &(*ifpp)->if_next;
-    }
-    if (*ifpp == 0)
-	printf("couldn't find interface ppp%d in ifnet list\n", ifp->if_unit);
-    else
-	*ifpp = ifp->if_next;
-
-    splx(s);
-}
-
-#endif /* __osf__ */
diff --git a/mdk-stage1/ppp/modules/ppp.c b/mdk-stage1/ppp/modules/ppp.c
deleted file mode 100644
index 44bf08dff..000000000
--- a/mdk-stage1/ppp/modules/ppp.c
+++ /dev/null
@@ -1,2486 +0,0 @@
-/*
- * ppp.c - STREAMS multiplexing pseudo-device driver for PPP.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2, SVR4, SunOS 4, and Digital UNIX.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <sys/stream.h>
-#include <sys/stropts.h>
-#include <sys/errno.h>
-#ifdef __osf__
-#include <sys/ioctl.h>
-#include <sys/cmn_err.h>
-#define queclass(mp)	((mp)->b_band & QPCTL)
-#else
-#include <sys/ioccom.h>
-#endif
-#include <sys/time.h>
-#ifdef SVR4
-#include <sys/cmn_err.h>
-#include <sys/conf.h>
-#include <sys/dlpi.h>
-#include <sys/ddi.h>
-#ifdef SOL2
-#include <sys/ksynch.h>
-#include <sys/kstat.h>
-#include <sys/sunddi.h>
-#include <sys/ethernet.h>
-#else
-#include <sys/socket.h>
-#include <sys/sockio.h>
-#include <net/if.h>
-#include <netinet/in.h>
-#endif /* SOL2 */
-#else /* not SVR4 */
-#include <sys/user.h>
-#endif /* SVR4 */
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-/*
- * Modifications marked with #ifdef PRIOQ are for priority queueing of
- * interactive traffic, and are due to Marko Zec <zec@japa.tel.fer.hr>.
- */
-#ifdef PRIOQ
-#endif	/* PRIOQ */
-
-#include <netinet/in.h>	/* leave this outside of PRIOQ for htons */
-
-#ifdef __STDC__
-#define __P(x)	x
-#else
-#define __P(x)	()
-#endif
-
-/*
- * The IP module may use this SAP value for IP packets.
- */
-#ifndef ETHERTYPE_IP
-#define ETHERTYPE_IP	0x800
-#endif
-
-#if !defined(ETHERTYPE_IPV6) 
-#define ETHERTYPE_IPV6	0x86dd
-#endif /* !defined(ETHERTYPE_IPV6) */
-
-#if !defined(ETHERTYPE_ALLSAP) && defined(SOL2)
-#define ETHERTYPE_ALLSAP   0
-#endif /* !defined(ETHERTYPE_ALLSAP) && defined(SOL2) */
-
-#if !defined(PPP_ALLSAP) && defined(SOL2)
-#define PPP_ALLSAP  PPP_ALLSTATIONS
-#endif /* !defined(PPP_ALLSAP) && defined(SOL2) */
-
-extern time_t time;
-
-#ifdef SOL2
-/*
- * We use this reader-writer lock to ensure that the lower streams
- * stay connected to the upper streams while the lower-side put and
- * service procedures are running.  Essentially it is an existence
- * lock for the upper stream associated with each lower stream.
- */
-krwlock_t ppp_lower_lock;
-#define LOCK_LOWER_W	rw_enter(&ppp_lower_lock, RW_WRITER)
-#define LOCK_LOWER_R	rw_enter(&ppp_lower_lock, RW_READER)
-#define TRYLOCK_LOWER_R	rw_tryenter(&ppp_lower_lock, RW_READER)
-#define UNLOCK_LOWER	rw_exit(&ppp_lower_lock)
-
-#define MT_ENTER(x)	mutex_enter(x)
-#define MT_EXIT(x)	mutex_exit(x)
-
-/*
- * Notes on multithreaded implementation for Solaris 2:
- *
- * We use an inner perimeter around each queue pair and an outer
- * perimeter around the whole driver.  The inner perimeter is
- * entered exclusively for all entry points (open, close, put,
- * service).  The outer perimeter is entered exclusively for open
- * and close and shared for put and service.  This is all done for
- * us by the streams framework.
- *
- * I used to think that the perimeters were entered for the lower
- * streams' put and service routines as well as for the upper streams'.
- * Because of problems experienced by people, and after reading the
- * documentation more closely, I now don't think that is true.  So we
- * now use ppp_lower_lock to give us an existence guarantee on the
- * upper stream controlling each lower stream.
- *
- * Shared entry to the outer perimeter protects the existence of all
- * the upper streams and their upperstr_t structures, and guarantees
- * that the following fields of any upperstr_t won't change:
- * nextmn, next, nextppa.  It guarantees that the lowerq field of an
- * upperstr_t won't go from non-zero to zero, that the global `ppas'
- * won't change and that the no lower stream will get unlinked.
- *
- * Shared (reader) access to ppa_lower_lock guarantees that no lower
- * stream will be unlinked and that the lowerq field of all upperstr_t
- * structures won't change.
- */
-
-#else /* SOL2 */
-#define LOCK_LOWER_W	0
-#define LOCK_LOWER_R	0
-#define TRYLOCK_LOWER_R	1
-#define UNLOCK_LOWER	0
-#define MT_ENTER(x)	0
-#define MT_EXIT(x)	0
-
-#endif /* SOL2 */
-
-/*
- * Private information; one per upper stream.
- */
-typedef struct upperstr {
-    minor_t mn;			/* minor device number */
-    struct upperstr *nextmn;	/* next minor device */
-    queue_t *q;			/* read q associated with this upper stream */
-    int flags;			/* flag bits, see below */
-    int state;			/* current DLPI state */
-    int sap;			/* service access point */
-    int req_sap;		/* which SAP the DLPI client requested */
-    struct upperstr *ppa;	/* control stream for our ppa */
-    struct upperstr *next;	/* next stream for this ppa */
-    uint ioc_id;		/* last ioctl ID for this stream */
-    enum NPmode npmode;		/* what to do with packets on this SAP */
-    unsigned char rblocked;	/* flow control has blocked upper read strm */
-	/* N.B. rblocked is only changed by control stream's put/srv procs */
-    /*
-     * There is exactly one control stream for each PPA.
-     * The following fields are only used for control streams.
-     */
-    int ppa_id;
-    queue_t *lowerq;		/* write queue attached below this PPA */
-    struct upperstr *nextppa;	/* next control stream */
-    int mru;
-    int mtu;
-    struct pppstat stats;	/* statistics */
-    time_t last_sent;		/* time last NP packet sent */
-    time_t last_recv;		/* time last NP packet rcvd */
-#ifdef SOL2
-    kmutex_t stats_lock;	/* lock for stats updates */
-    kstat_t *kstats;		/* stats for netstat */
-#endif /* SOL2 */
-#ifdef LACHTCP
-    int ifflags;
-    char ifname[IFNAMSIZ];
-    struct ifstats ifstats;
-#endif /* LACHTCP */
-} upperstr_t;
-
-/* Values for flags */
-#define US_PRIV		1	/* stream was opened by superuser */
-#define US_CONTROL	2	/* stream is a control stream */
-#define US_BLOCKED	4	/* flow ctrl has blocked lower write stream */
-#define US_LASTMOD	8	/* no PPP modules below us */
-#define US_DBGLOG	0x10	/* log various occurrences */
-#define US_RBLOCKED	0x20	/* flow ctrl has blocked upper read stream */
-
-#if defined(SOL2)
-#if DL_CURRENT_VERSION >= 2
-#define US_PROMISC	0x40	/* stream is promiscuous */
-#endif /* DL_CURRENT_VERSION >= 2 */
-#define US_RAWDATA	0x80	/* raw M_DATA, no DLPI header */
-#endif /* defined(SOL2) */
-
-#ifdef PRIOQ
-static u_char max_band=0;
-static u_char def_band=0;
-
-#define IPPORT_DEFAULT		65535
-
-/*
- * Port priority table
- * Highest priority ports are listed first, lowest are listed last.
- * ICMP & packets using unlisted ports will be treated as "default".
- * If IPPORT_DEFAULT is not listed here, "default" packets will be 
- * assigned lowest priority.
- * Each line should be terminated with "0".
- * Line containing only "0" marks the end of the list.
- */
-
-static u_short prioq_table[]= {
-    113, 53, 0,
-    22, 23, 513, 517, 518, 0,
-    514, 21, 79, 111, 0,
-    25, 109, 110, 0,
-    IPPORT_DEFAULT, 0,
-    20, 70, 80, 8001, 8008, 8080, 0, /* 8001,8008,8080 - common proxy ports */
-0 };
-
-#endif	/* PRIOQ */
-
-
-static upperstr_t *minor_devs = NULL;
-static upperstr_t *ppas = NULL;
-
-#ifdef SVR4
-static int pppopen __P((queue_t *, dev_t *, int, int, cred_t *));
-static int pppclose __P((queue_t *, int, cred_t *));
-#else
-static int pppopen __P((queue_t *, int, int, int));
-static int pppclose __P((queue_t *, int));
-#endif /* SVR4 */
-static int pppurput __P((queue_t *, mblk_t *));
-static int pppuwput __P((queue_t *, mblk_t *));
-static int pppursrv __P((queue_t *));
-static int pppuwsrv __P((queue_t *));
-static int ppplrput __P((queue_t *, mblk_t *));
-static int ppplwput __P((queue_t *, mblk_t *));
-static int ppplrsrv __P((queue_t *));
-static int ppplwsrv __P((queue_t *));
-#ifndef NO_DLPI
-static void dlpi_request __P((queue_t *, mblk_t *, upperstr_t *));
-static void dlpi_error __P((queue_t *, upperstr_t *, int, int, int));
-static void dlpi_ok __P((queue_t *, int));
-#endif
-static int send_data __P((mblk_t *, upperstr_t *));
-static void new_ppa __P((queue_t *, mblk_t *));
-static void attach_ppa __P((queue_t *, mblk_t *));
-static void detach_ppa __P((queue_t *, mblk_t *));
-static void detach_lower __P((queue_t *, mblk_t *));
-static void debug_dump __P((queue_t *, mblk_t *));
-static upperstr_t *find_dest __P((upperstr_t *, int));
-#if defined(SOL2)
-static upperstr_t *find_promisc __P((upperstr_t *, int));
-static mblk_t *prepend_ether __P((upperstr_t *, mblk_t *, int));
-static mblk_t *prepend_udind __P((upperstr_t *, mblk_t *, int));
-static void promisc_sendup __P((upperstr_t *, mblk_t *, int, int));
-#endif /* defined(SOL2) */
-static int putctl2 __P((queue_t *, int, int, int));
-static int putctl4 __P((queue_t *, int, int, int));
-static int pass_packet __P((upperstr_t *ppa, mblk_t *mp, int outbound));
-#ifdef FILTER_PACKETS
-static int ip_hard_filter __P((upperstr_t *ppa, mblk_t *mp, int outbound));
-#endif /* FILTER_PACKETS */
-
-#define PPP_ID 0xb1a6
-static struct module_info ppp_info = {
-#ifdef PRIOQ
-    PPP_ID, "ppp", 0, 512, 512, 384
-#else
-    PPP_ID, "ppp", 0, 512, 512, 128
-#endif	/* PRIOQ */
-};
-
-static struct qinit pppurint = {
-    pppurput, pppursrv, pppopen, pppclose, NULL, &ppp_info, NULL
-};
-
-static struct qinit pppuwint = {
-    pppuwput, pppuwsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-static struct qinit ppplrint = {
-    ppplrput, ppplrsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-static struct qinit ppplwint = {
-    ppplwput, ppplwsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-#ifdef LACHTCP
-extern struct ifstats *ifstats;
-int pppdevflag = 0;
-#endif
-
-struct streamtab pppinfo = {
-    &pppurint, &pppuwint,
-    &ppplrint, &ppplwint
-};
-
-int ppp_count;
-
-/*
- * How we maintain statistics.
- */
-#ifdef SOL2
-#define INCR_IPACKETS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[0].value.ul++;	\
-	}
-#define INCR_IERRORS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[1].value.ul++;	\
-	}
-#define INCR_OPACKETS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[2].value.ul++;	\
-	}
-#define INCR_OERRORS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[3].value.ul++;	\
-	}
-#endif
-
-#ifdef LACHTCP
-#define INCR_IPACKETS(ppa)	ppa->ifstats.ifs_ipackets++;
-#define INCR_IERRORS(ppa)	ppa->ifstats.ifs_ierrors++;
-#define INCR_OPACKETS(ppa)	ppa->ifstats.ifs_opackets++;
-#define INCR_OERRORS(ppa)	ppa->ifstats.ifs_oerrors++;
-#endif
-
-/*
- * STREAMS driver entry points.
- */
-static int
-#ifdef SVR4
-pppopen(q, devp, oflag, sflag, credp)
-    queue_t *q;
-    dev_t *devp;
-    int oflag, sflag;
-    cred_t *credp;
-#else
-pppopen(q, dev, oflag, sflag)
-    queue_t *q;
-    int dev;			/* really dev_t */
-    int oflag, sflag;
-#endif
-{
-    upperstr_t *up;
-    upperstr_t **prevp;
-    minor_t mn;
-#ifdef PRIOQ
-    u_short *ptr;
-    u_char new_band;
-#endif	/* PRIOQ */
-
-    if (q->q_ptr)
-	DRV_OPEN_OK(dev);	/* device is already open */
-
-#ifdef PRIOQ
-    /* Calculate max_bband & def_band from definitions in prioq.h
-       This colud be done at some more approtiate time (less often)
-       but this way it works well so I'll just leave it here */
-
-    max_band = 1;
-    def_band = 0;
-    ptr = prioq_table;
-    while (*ptr) {
-        new_band = 1;
-        while (*ptr)
-	    if (*ptr++ == IPPORT_DEFAULT) {
-		new_band = 0;
-		def_band = max_band;
-	    }
-        max_band += new_band;
-        ptr++;
-    }
-    if (def_band)
-        def_band = max_band - def_band;
-    --max_band;
-#endif	/* PRIOQ */
-
-    if (sflag == CLONEOPEN) {
-	mn = 0;
-	for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) {
-	    if (up->mn != mn)
-		break;
-	    ++mn;
-	}
-    } else {
-#ifdef SVR4
-	mn = getminor(*devp);
-#else
-	mn = minor(dev);
-#endif
-	for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) {
-	    if (up->mn >= mn)
-		break;
-	}
-	if (up->mn == mn) {
-	    /* this can't happen */
-	    q->q_ptr = WR(q)->q_ptr = (caddr_t) up;
-	    DRV_OPEN_OK(dev);
-	}
-    }
-
-    /*
-     * Construct a new minor node.
-     */
-    up = (upperstr_t *) ALLOC_SLEEP(sizeof(upperstr_t));
-    bzero((caddr_t) up, sizeof(upperstr_t));
-    if (up == 0) {
-	DPRINT("pppopen: out of kernel memory\n");
-	OPEN_ERROR(ENXIO);
-    }
-    up->nextmn = *prevp;
-    *prevp = up;
-    up->mn = mn;
-#ifdef SVR4
-    *devp = makedevice(getmajor(*devp), mn);
-#endif
-    up->q = q;
-    if (NOTSUSER() == 0)
-	up->flags |= US_PRIV;
-#ifndef NO_DLPI
-    up->state = DL_UNATTACHED;
-#endif
-#ifdef LACHTCP
-    up->ifflags = IFF_UP | IFF_POINTOPOINT;
-#endif
-    up->sap = -1;
-    up->last_sent = up->last_recv = time;
-    up->npmode = NPMODE_DROP;
-    q->q_ptr = (caddr_t) up;
-    WR(q)->q_ptr = (caddr_t) up;
-    noenable(WR(q));
-#ifdef SOL2
-    mutex_init(&up->stats_lock, NULL, MUTEX_DRIVER, NULL);
-#endif
-    ++ppp_count;
-
-    qprocson(q);
-    DRV_OPEN_OK(makedev(major(dev), mn));
-}
-
-static int
-#ifdef SVR4
-pppclose(q, flag, credp)
-    queue_t *q;
-    int flag;
-    cred_t *credp;
-#else
-pppclose(q, flag)
-    queue_t *q;
-    int flag;
-#endif
-{
-    upperstr_t *up, **upp;
-    upperstr_t *as, *asnext;
-    upperstr_t **prevp;
-
-    qprocsoff(q);
-
-    up = (upperstr_t *) q->q_ptr;
-    if (up == 0) {
-	DPRINT("pppclose: q_ptr = 0\n");
-	return 0;
-    }
-    if (up->flags & US_DBGLOG)
-	DPRINT2("ppp/%d: close, flags=%x\n", up->mn, up->flags);
-    if (up->flags & US_CONTROL) {
-#ifdef LACHTCP
-	struct ifstats *ifp, *pifp;
-#endif
-	if (up->lowerq != 0) {
-	    /* Gack! the lower stream should have be unlinked earlier! */
-	    DPRINT1("ppp%d: lower stream still connected on close?\n",
-		    up->mn);
-	    LOCK_LOWER_W;
-	    up->lowerq->q_ptr = 0;
-	    RD(up->lowerq)->q_ptr = 0;
-	    up->lowerq = 0;
-	    UNLOCK_LOWER;
-	}
-
-	/*
-	 * This stream represents a PPA:
-	 * For all streams attached to the PPA, clear their
-	 * references to this PPA.
-	 * Then remove this PPA from the list of PPAs.
-	 */
-	for (as = up->next; as != 0; as = asnext) {
-	    asnext = as->next;
-	    as->next = 0;
-	    as->ppa = 0;
-	    if (as->flags & US_BLOCKED) {
-		as->flags &= ~US_BLOCKED;
-		flushq(WR(as->q), FLUSHDATA);
-	    }
-	}
-	for (upp = &ppas; *upp != 0; upp = &(*upp)->nextppa)
-	    if (*upp == up) {
-		*upp = up->nextppa;
-		break;
-	    }
-#ifdef LACHTCP
-	/* Remove the statistics from the active list.  */
-	for (ifp = ifstats, pifp = 0; ifp; ifp = ifp->ifs_next) {
-	    if (ifp == &up->ifstats) {
-		if (pifp)
-		    pifp->ifs_next = ifp->ifs_next;
-		else
-		    ifstats = ifp->ifs_next;
-		break;
-	    }
-	    pifp = ifp;
-	}
-#endif
-    } else {
-	/*
-	 * If this stream is attached to a PPA,
-	 * remove it from the PPA's list.
-	 */
-	if ((as = up->ppa) != 0) {
-	    for (; as->next != 0; as = as->next)
-		if (as->next == up) {
-		    as->next = up->next;
-		    break;
-		}
-	}
-    }
-
-#ifdef SOL2
-    if (up->kstats)
-	kstat_delete(up->kstats);
-    mutex_destroy(&up->stats_lock);
-#endif
-
-    q->q_ptr = NULL;
-    WR(q)->q_ptr = NULL;
-
-    for (prevp = &minor_devs; *prevp != 0; prevp = &(*prevp)->nextmn) {
-	if (*prevp == up) {
-	    *prevp = up->nextmn;
-	    break;
-	}
-    }
-    FREE(up, sizeof(upperstr_t));
-    --ppp_count;
-
-    return 0;
-}
-
-/*
- * A message from on high.  We do one of three things:
- *	- qreply()
- *	- put the message on the lower write stream
- *	- queue it for our service routine
- */
-static int
-pppuwput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *ppa, *nps;
-    struct iocblk *iop;
-    struct linkblk *lb;
-#ifdef LACHTCP
-    struct ifreq *ifr;
-    int i;
-#endif
-    queue_t *lq;
-    int error, n, sap;
-    mblk_t *mq;
-    struct ppp_idle *pip;
-#ifdef PRIOQ
-    queue_t *tlq;
-#endif	/* PRIOQ */
-#ifdef NO_DLPI
-    upperstr_t *os;
-#endif
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("pppuwput: q_ptr = 0!\n");
-	return 0;
-    }
-    if (mp == 0) {
-	DPRINT1("pppuwput/%d: mp = 0!\n", us->mn);
-	return 0;
-    }
-    if (mp->b_datap == 0) {
-	DPRINT1("pppuwput/%d: mp->b_datap = 0!\n", us->mn);
-	return 0;
-    }
-    switch (mp->b_datap->db_type) {
-#ifndef NO_DLPI
-    case M_PCPROTO:
-    case M_PROTO:
-	dlpi_request(q, mp, us);
-	break;
-#endif /* NO_DLPI */
-
-    case M_DATA:
-	if (us->flags & US_DBGLOG)
-	    DPRINT3("ppp/%d: uwput M_DATA len=%d flags=%x\n",
-		    us->mn, msgdsize(mp), us->flags);
-	if (us->ppa == 0 || msgdsize(mp) > us->ppa->mtu + PPP_HDRLEN
-#ifndef NO_DLPI
-	    || (us->flags & US_CONTROL) == 0
-#endif /* NO_DLPI */
-	    ) {
-	    DPRINT1("pppuwput: junk data len=%d\n", msgdsize(mp));
-	    freemsg(mp);
-	    break;
-	}
-#ifdef NO_DLPI
-	if ((us->flags & US_CONTROL) == 0 && !pass_packet(us, mp, 1))
-	    break;
-#endif
-	if (!send_data(mp, us))
-	    putq(q, mp);
-	break;
-
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	error = EINVAL;
-	if (us->flags & US_DBGLOG)
-	    DPRINT3("ppp/%d: ioctl %x count=%d\n",
-		    us->mn, iop->ioc_cmd, iop->ioc_count);
-	switch (iop->ioc_cmd) {
-#if defined(SOL2)
-	case DLIOCRAW:	    /* raw M_DATA mode */
-	    us->flags |= US_RAWDATA;
-	    error = 0;
-	    break;
-#endif /* defined(SOL2) */
-	case I_LINK:
-	    if ((us->flags & US_CONTROL) == 0 || us->lowerq != 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl I_LINK b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    lb = (struct linkblk *) mp->b_cont->b_rptr;
-	    lq = lb->l_qbot;
-	    if (lq == 0) {
-		DPRINT1("pppuwput/%d: ioctl I_LINK l_qbot = 0!\n", us->mn);
-		break;
-	    }
-	    LOCK_LOWER_W;
-	    us->lowerq = lq;
-	    lq->q_ptr = (caddr_t) q;
-	    RD(lq)->q_ptr = (caddr_t) us->q;
-	    UNLOCK_LOWER;
-	    iop->ioc_count = 0;
-	    error = 0;
-	    us->flags &= ~US_LASTMOD;
-	    /* Unblock upper streams which now feed this lower stream. */
-	    qenable(q);
-	    /* Send useful information down to the modules which
-	       are now linked below us. */
-	    putctl2(lq, M_CTL, PPPCTL_UNIT, us->ppa_id);
-	    putctl4(lq, M_CTL, PPPCTL_MRU, us->mru);
-	    putctl4(lq, M_CTL, PPPCTL_MTU, us->mtu);
-#ifdef PRIOQ
-            /* Lower tty driver's queue hiwat/lowat from default 4096/128
-               to 256/128 since we don't want queueing of data on
-               output to physical device */
-
-            freezestr(lq);
-            for (tlq = lq; tlq->q_next != NULL; tlq = tlq->q_next)
-		;
-            strqset(tlq, QHIWAT, 0, 256);
-            strqset(tlq, QLOWAT, 0, 128);
-            unfreezestr(lq);
-#endif	/* PRIOQ */
-	    break;
-
-	case I_UNLINK:
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl I_UNLINK b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    lb = (struct linkblk *) mp->b_cont->b_rptr;
-#if DEBUG
-	    if (us->lowerq != lb->l_qbot) {
-		DPRINT2("ppp unlink: lowerq=%x qbot=%x\n",
-			us->lowerq, lb->l_qbot);
-		break;
-	    }
-#endif
-	    iop->ioc_count = 0;
-	    qwriter(q, mp, detach_lower, PERIM_OUTER);
-	    error = -1;
-	    break;
-
-	case PPPIO_NEWPPA:
-	    if (us->flags & US_CONTROL)
-		break;
-	    if ((us->flags & US_PRIV) == 0) {
-		error = EPERM;
-		break;
-	    }
-	    /* Arrange to return an int */
-	    if ((mq = mp->b_cont) == 0
-		|| mq->b_datap->db_lim - mq->b_rptr < sizeof(int)) {
-		mq = allocb(sizeof(int), BPRI_HI);
-		if (mq == 0) {
-		    error = ENOSR;
-		    break;
-		}
-		if (mp->b_cont != 0)
-		    freemsg(mp->b_cont);
-		mp->b_cont = mq;
-		mq->b_cont = 0;
-	    }
-	    iop->ioc_count = sizeof(int);
-	    mq->b_wptr = mq->b_rptr + sizeof(int);
-	    qwriter(q, mp, new_ppa, PERIM_OUTER);
-	    error = -1;
-	    break;
-
-	case PPPIO_ATTACH:
-	    /* like dlpi_attach, for programs which can't write to
-	       the stream (like pppstats) */
-	    if (iop->ioc_count != sizeof(int) || us->ppa != 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_ATTACH b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    for (ppa = ppas; ppa != 0; ppa = ppa->nextppa)
-		if (ppa->ppa_id == n)
-		    break;
-	    if (ppa == 0)
-		break;
-	    us->ppa = ppa;
-	    iop->ioc_count = 0;
-	    qwriter(q, mp, attach_ppa, PERIM_OUTER);
-	    error = -1;
-	    break;
-
-#ifdef NO_DLPI
-	case PPPIO_BIND:
-	    /* Attach to a given SAP. */
-	    if (iop->ioc_count != sizeof(int) || us->ppa == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_BIND b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    /* n must be a valid PPP network protocol number. */
-	    if (n < 0x21 || n > 0x3fff || (n & 0x101) != 1)
-		break;
-	    /* check that no other stream is bound to this sap already. */
-	    for (os = us->ppa; os != 0; os = os->next)
-		if (os->sap == n)
-		    break;
-	    if (os != 0)
-		break;
-	    us->sap = n;
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-#endif /* NO_DLPI */
-
-	case PPPIO_MRU:
-	    if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_MRU b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n <= 0 || n > PPP_MAXMRU)
-		break;
-	    if (n < PPP_MRU)
-		n = PPP_MRU;
-	    us->mru = n;
-	    if (us->lowerq)
-		putctl4(us->lowerq, M_CTL, PPPCTL_MRU, n);
-	    error = 0;
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_MTU:
-	    if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_MTU b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n <= 0 || n > PPP_MAXMTU)
-		break;
-	    us->mtu = n;
-#ifdef LACHTCP
-	    /* The MTU reported in netstat, not used as IP max packet size! */
-	    us->ifstats.ifs_mtu = n;
-#endif
-	    if (us->lowerq)
-		putctl4(us->lowerq, M_CTL, PPPCTL_MTU, n);
-	    error = 0;
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_LASTMOD:
-	    us->flags |= US_LASTMOD;
-	    error = 0;
-	    break;
-
-	case PPPIO_DEBUG:
-	    if (iop->ioc_count != sizeof(int))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_DEBUG b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n == PPPDBG_DUMP + PPPDBG_DRIVER) {
-		qwriter(q, NULL, debug_dump, PERIM_OUTER);
-		iop->ioc_count = 0;
-		error = -1;
-	    } else if (n == PPPDBG_LOG + PPPDBG_DRIVER) {
-		DPRINT1("ppp/%d: debug log enabled\n", us->mn);
-		us->flags |= US_DBGLOG;
-		iop->ioc_count = 0;
-		error = 0;
-	    } else {
-		if (us->ppa == 0 || us->ppa->lowerq == 0)
-		    break;
-		putnext(us->ppa->lowerq, mp);
-		error = -1;
-	    }
-	    break;
-
-	case PPPIO_NPMODE:
-	    if (iop->ioc_count != 2 * sizeof(int))
-		break;
-	    if ((us->flags & US_CONTROL) == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_NPMODE b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    sap = ((int *)mp->b_cont->b_rptr)[0];
-	    for (nps = us->next; nps != 0; nps = nps->next) {
-		if (us->flags & US_DBGLOG)
-		    DPRINT2("us = 0x%x, us->next->sap = 0x%x\n", nps, nps->sap);
-		if (nps->sap == sap)
-		    break;
-	    }
-	    if (nps == 0) {
-		if (us->flags & US_DBGLOG)
-		    DPRINT2("ppp/%d: no stream for sap %x\n", us->mn, sap);
-		break;
-	    }
-	    /* XXX possibly should use qwriter here */
-	    nps->npmode = (enum NPmode) ((int *)mp->b_cont->b_rptr)[1];
-	    if (nps->npmode != NPMODE_QUEUE && (nps->flags & US_BLOCKED) != 0)
-		qenable(WR(nps->q));
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case PPPIO_GIDLE:
-	    if ((ppa = us->ppa) == 0)
-		break;
-	    mq = allocb(sizeof(struct ppp_idle), BPRI_HI);
-	    if (mq == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = mq;
-	    mq->b_cont = 0;
-	    pip = (struct ppp_idle *) mq->b_wptr;
-	    pip->xmit_idle = time - ppa->last_sent;
-	    pip->recv_idle = time - ppa->last_recv;
-	    mq->b_wptr += sizeof(struct ppp_idle);
-	    iop->ioc_count = sizeof(struct ppp_idle);
-	    error = 0;
-	    break;
-
-#ifdef LACHTCP
-	case SIOCSIFNAME:
-	    /* Sent from IP down to us.  Attach the ifstats structure.  */
-	    if (iop->ioc_count != sizeof(struct ifreq) || us->ppa == 0)
-	        break;
-	    ifr = (struct ifreq *)mp->b_cont->b_rptr;
-	    /* Find the unit number in the interface name.  */
-	    for (i = 0; i < IFNAMSIZ; i++) {
-		if (ifr->ifr_name[i] == 0 ||
-		    (ifr->ifr_name[i] >= '0' &&
-		     ifr->ifr_name[i] <= '9'))
-		    break;
-		else
-		    us->ifname[i] = ifr->ifr_name[i];
-	    }
-	    us->ifname[i] = 0;
-
-	    /* Convert the unit number to binary.  */
-	    for (n = 0; i < IFNAMSIZ; i++) {
-		if (ifr->ifr_name[i] == 0) {
-		    break;
-		}
-	        else {
-		    n = n * 10 + ifr->ifr_name[i] - '0';
-		}
-	    }
-
-	    /* Verify the ppa.  */
-	    if (us->ppa->ppa_id != n)
-		break;
-	    ppa = us->ppa;
-
-	    /* Set up the netstat block.  */
-	    strncpy (ppa->ifname, us->ifname, IFNAMSIZ);
-
-	    ppa->ifstats.ifs_name = ppa->ifname;
-	    ppa->ifstats.ifs_unit = n;
-	    ppa->ifstats.ifs_active = us->state != DL_UNBOUND;
-	    ppa->ifstats.ifs_mtu = ppa->mtu;
-
-	    /* Link in statistics used by netstat.  */
-	    ppa->ifstats.ifs_next = ifstats;
-	    ifstats = &ppa->ifstats;
-
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case SIOCGIFFLAGS:
-	    if (!(us->flags & US_CONTROL)) {
-		if (us->ppa)
-		    us = us->ppa;
-	        else
-		    break;
-	    }
-	    ((struct iocblk_in *)iop)->ioc_ifflags = us->ifflags;
-	    error = 0;
-	    break;
-
-	case SIOCSIFFLAGS:
-	    if (!(us->flags & US_CONTROL)) {
-		if (us->ppa)
-		    us = us->ppa;
-		else
-		    break;
-	    }
-	    us->ifflags = ((struct iocblk_in *)iop)->ioc_ifflags;
-	    error = 0;
-	    break;
-
-	case SIOCSIFADDR:
-	    if (!(us->flags & US_CONTROL)) {
-		if (us->ppa)
-		    us = us->ppa;
-		else
-		    break;
-	    }
-	    us->ifflags |= IFF_RUNNING;
-	    ((struct iocblk_in *)iop)->ioc_ifflags |= IFF_RUNNING;
-	    error = 0;
-	    break;
-
-	case SIOCSIFMTU:
-	    /*
-	     * Vanilla SVR4 systems don't handle SIOCSIFMTU, rather
-	     * they take the MTU from the DL_INFO_ACK we sent in response
-	     * to their DL_INFO_REQ.  Fortunately, they will update the
-	     * MTU if we send an unsolicited DL_INFO_ACK up.
-	     */
-	    if ((mq = allocb(sizeof(dl_info_req_t), BPRI_HI)) == 0)
-		break;		/* should do bufcall */
-	    ((union DL_primitives *)mq->b_rptr)->dl_primitive = DL_INFO_REQ;
-	    mq->b_wptr = mq->b_rptr + sizeof(dl_info_req_t);
-	    dlpi_request(q, mq, us);
-	    error = 0;
-	    break;
-
-	case SIOCGIFNETMASK:
-	case SIOCSIFNETMASK:
-	case SIOCGIFADDR:
-	case SIOCGIFDSTADDR:
-	case SIOCSIFDSTADDR:
-	case SIOCGIFMETRIC:
-	    error = 0;
-	    break;
-#endif /* LACHTCP */
-
-	default:
-	    if (us->ppa == 0 || us->ppa->lowerq == 0)
-		break;
-	    us->ioc_id = iop->ioc_id;
-	    error = -1;
-	    switch (iop->ioc_cmd) {
-	    case PPPIO_GETSTAT:
-	    case PPPIO_GETCSTAT:
-		if (us->flags & US_LASTMOD) {
-		    error = EINVAL;
-		    break;
-		}
-		putnext(us->ppa->lowerq, mp);
-		break;
-	    default:
-		if (us->flags & US_PRIV)
-		    putnext(us->ppa->lowerq, mp);
-		else {
-		    DPRINT1("ppp ioctl %x rejected\n", iop->ioc_cmd);
-		    error = EPERM;
-		}
-		break;
-	    }
-	    break;
-	}
-
-	if (error > 0) {
-	    iop->ioc_error = error;
-	    mp->b_datap->db_type = M_IOCNAK;
-	    qreply(q, mp);
-	} else if (error == 0) {
-	    mp->b_datap->db_type = M_IOCACK;
-	    qreply(q, mp);
-	}
-	break;
-
-    case M_FLUSH:
-	if (us->flags & US_DBGLOG)
-	    DPRINT2("ppp/%d: flush %x\n", us->mn, *mp->b_rptr);
-	if (*mp->b_rptr & FLUSHW)
-	    flushq(q, FLUSHDATA);
-	if (*mp->b_rptr & FLUSHR) {
-	    *mp->b_rptr &= ~FLUSHW;
-	    qreply(q, mp);
-	} else
-	    freemsg(mp);
-	break;
-
-    default:
-	freemsg(mp);
-	break;
-    }
-    return 0;
-}
-
-#ifndef NO_DLPI
-static void
-dlpi_request(q, mp, us)
-    queue_t *q;
-    mblk_t *mp;
-    upperstr_t *us;
-{
-    union DL_primitives *d = (union DL_primitives *) mp->b_rptr;
-    int size = mp->b_wptr - mp->b_rptr;
-    mblk_t *reply, *np;
-    upperstr_t *ppa, *os;
-    int sap, len;
-    dl_info_ack_t *info;
-    dl_bind_ack_t *ackp;
-#if DL_CURRENT_VERSION >= 2
-    dl_phys_addr_ack_t	*paddrack;
-    static struct ether_addr eaddr = {0};
-#endif
-
-    if (us->flags & US_DBGLOG)
-	DPRINT3("ppp/%d: dlpi prim %x len=%d\n", us->mn,
-		d->dl_primitive, size);
-    switch (d->dl_primitive) {
-    case DL_INFO_REQ:
-	if (size < sizeof(dl_info_req_t))
-	    goto badprim;
-	if ((reply = allocb(sizeof(dl_info_ack_t), BPRI_HI)) == 0)
-	    break;		/* should do bufcall */
-	reply->b_datap->db_type = M_PCPROTO;
-	info = (dl_info_ack_t *) reply->b_wptr;
-	reply->b_wptr += sizeof(dl_info_ack_t);
-	bzero((caddr_t) info, sizeof(dl_info_ack_t));
-	info->dl_primitive = DL_INFO_ACK;
-	info->dl_max_sdu = us->ppa? us->ppa->mtu: PPP_MAXMTU;
-	info->dl_min_sdu = 1;
-	info->dl_addr_length = sizeof(uint);
-	info->dl_mac_type = DL_ETHER;	/* a bigger lie */
-	info->dl_current_state = us->state;
-	info->dl_service_mode = DL_CLDLS;
-	info->dl_provider_style = DL_STYLE2;
-#if DL_CURRENT_VERSION >= 2
-	info->dl_sap_length = sizeof(uint);
-	info->dl_version = DL_CURRENT_VERSION;
-#endif
-	qreply(q, reply);
-	break;
-
-    case DL_ATTACH_REQ:
-	if (size < sizeof(dl_attach_req_t))
-	    goto badprim;
-	if (us->state != DL_UNATTACHED || us->ppa != 0) {
-	    dlpi_error(q, us, DL_ATTACH_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	for (ppa = ppas; ppa != 0; ppa = ppa->nextppa)
-	    if (ppa->ppa_id == d->attach_req.dl_ppa)
-		break;
-	if (ppa == 0) {
-	    dlpi_error(q, us, DL_ATTACH_REQ, DL_BADPPA, 0);
-	    break;
-	}
-	us->ppa = ppa;
-	qwriter(q, mp, attach_ppa, PERIM_OUTER);
-	return;
-
-    case DL_DETACH_REQ:
-	if (size < sizeof(dl_detach_req_t))
-	    goto badprim;
-	if (us->state != DL_UNBOUND || us->ppa == 0) {
-	    dlpi_error(q, us, DL_DETACH_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	qwriter(q, mp, detach_ppa, PERIM_OUTER);
-	return;
-
-    case DL_BIND_REQ:
-	if (size < sizeof(dl_bind_req_t))
-	    goto badprim;
-	if (us->state != DL_UNBOUND || us->ppa == 0) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-#if 0
-	/* apparently this test fails (unnecessarily?) on some systems */
-	if (d->bind_req.dl_service_mode != DL_CLDLS) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_UNSUPPORTED, 0);
-	    break;
-	}
-#endif
-
-	/* saps must be valid PPP network protocol numbers,
-	   except that we accept ETHERTYPE_IP in place of PPP_IP. */
-	sap = d->bind_req.dl_sap;
-	us->req_sap = sap;
-
-#if defined(SOL2)
-	if (us->flags & US_DBGLOG)
-	    DPRINT2("DL_BIND_REQ: ip gives sap = 0x%x, us = 0x%x", sap, us);
-
-	if (sap == ETHERTYPE_IP)	    /* normal IFF_IPV4 */
-	    sap = PPP_IP;
-	else if (sap == ETHERTYPE_IPV6)	    /* when IFF_IPV6 is set */
-	    sap = PPP_IPV6;
-	else if (sap == ETHERTYPE_ALLSAP)   /* snoop gives sap of 0 */
-	    sap = PPP_ALLSAP;
-	else {
-	    DPRINT2("DL_BIND_REQ: unrecognized sap = 0x%x, us = 0x%x", sap, us);
-	    dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
-	    break;
-	}
-#else
-	if (sap == ETHERTYPE_IP)
-	    sap = PPP_IP;
-	if (sap < 0x21 || sap > 0x3fff || (sap & 0x101) != 1) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
-	    break;
-	}
-#endif /* defined(SOL2) */
-
-	/* check that no other stream is bound to this sap already. */
-	for (os = us->ppa; os != 0; os = os->next)
-	    if (os->sap == sap)
-		break;
-	if (os != 0) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_NOADDR, 0);
-	    break;
-	}
-
-	us->sap = sap;
-	us->state = DL_IDLE;
-
-	if ((reply = allocb(sizeof(dl_bind_ack_t) + sizeof(uint),
-			    BPRI_HI)) == 0)
-	    break;		/* should do bufcall */
-	ackp = (dl_bind_ack_t *) reply->b_wptr;
-	reply->b_wptr += sizeof(dl_bind_ack_t) + sizeof(uint);
-	reply->b_datap->db_type = M_PCPROTO;
-	bzero((caddr_t) ackp, sizeof(dl_bind_ack_t));
-	ackp->dl_primitive = DL_BIND_ACK;
-	ackp->dl_sap = sap;
-	ackp->dl_addr_length = sizeof(uint);
-	ackp->dl_addr_offset = sizeof(dl_bind_ack_t);
-	*(uint *)(ackp+1) = sap;
-	qreply(q, reply);
-	break;
-
-    case DL_UNBIND_REQ:
-	if (size < sizeof(dl_unbind_req_t))
-	    goto badprim;
-	if (us->state != DL_IDLE) {
-	    dlpi_error(q, us, DL_UNBIND_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	us->sap = -1;
-	us->state = DL_UNBOUND;
-#ifdef LACHTCP
-	us->ppa->ifstats.ifs_active = 0;
-#endif
-	dlpi_ok(q, DL_UNBIND_REQ);
-	break;
-
-    case DL_UNITDATA_REQ:
-	if (size < sizeof(dl_unitdata_req_t))
-	    goto badprim;
-	if (us->state != DL_IDLE) {
-	    dlpi_error(q, us, DL_UNITDATA_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	if ((ppa = us->ppa) == 0) {
-	    cmn_err(CE_CONT, "ppp: in state dl_idle but ppa == 0?\n");
-	    break;
-	}
-	len = mp->b_cont == 0? 0: msgdsize(mp->b_cont);
-	if (len > ppa->mtu) {
-	    DPRINT2("dlpi data too large (%d > %d)\n", len, ppa->mtu);
-	    break;
-	}
-
-#if defined(SOL2)
-	/*
-	 * Should there be any promiscuous stream(s), send the data
-	 * up for each promiscuous stream that we recognize.
-	 */
-	if (mp->b_cont)
-	    promisc_sendup(ppa, mp->b_cont, us->sap, 0);
-#endif /* defined(SOL2) */
-
-	mp->b_band = 0;
-#ifdef PRIOQ
-        /* Extract s_port & d_port from IP-packet, the code is a bit
-           dirty here, but so am I, too... */
-        if (mp->b_datap->db_type == M_PROTO && us->sap == PPP_IP
-	    && mp->b_cont != 0) {
-	    u_char *bb, *tlh;
-	    int iphlen, len;
-	    u_short *ptr;
-	    u_char band_unset, cur_band, syn;
-	    u_short s_port, d_port;
-
-            bb = mp->b_cont->b_rptr; /* bb points to IP-header*/
-	    len = mp->b_cont->b_wptr - mp->b_cont->b_rptr;
-            syn = 0;
-	    s_port = IPPORT_DEFAULT;
-	    d_port = IPPORT_DEFAULT;
-	    if (len >= 20) {	/* 20 = minimum length of IP header */
-		iphlen = (bb[0] & 0x0f) * 4;
-		tlh = bb + iphlen;
-		len -= iphlen;
-		switch (bb[9]) {
-		case IPPROTO_TCP:
-		    if (len >= 20) {	      /* min length of TCP header */
-			s_port = (tlh[0] << 8) + tlh[1];
-			d_port = (tlh[2] << 8) + tlh[3];
-			syn = tlh[13] & 0x02;
-		    }
-		    break;
-		case IPPROTO_UDP:
-		    if (len >= 8) {	      /* min length of UDP header */
-			s_port = (tlh[0] << 8) + tlh[1];
-			d_port = (tlh[2] << 8) + tlh[3];
-		    }
-		    break;
-		}
-	    }
-
-            /*
-	     * Now calculate b_band for this packet from the
-	     * port-priority table.
-	     */
-            ptr = prioq_table;
-            cur_band = max_band;
-            band_unset = 1;
-            while (*ptr) {
-                while (*ptr && band_unset)
-                    if (s_port == *ptr || d_port == *ptr++) {
-                        mp->b_band = cur_band;
-                        band_unset = 0;
-                        break;
-		    }
-                ptr++;
-                cur_band--;
-	    }
-            if (band_unset)
-		mp->b_band = def_band;
-            /* It may be usable to urge SYN packets a bit */
-            if (syn)
-		mp->b_band++;
-	}
-#endif	/* PRIOQ */
-	/* this assumes PPP_HDRLEN <= sizeof(dl_unitdata_req_t) */
-	if (mp->b_datap->db_ref > 1) {
-	    np = allocb(PPP_HDRLEN, BPRI_HI);
-	    if (np == 0)
-		break;		/* gak! */
-	    np->b_cont = mp->b_cont;
-	    mp->b_cont = 0;
-	    freeb(mp);
-	    mp = np;
-	} else
-	    mp->b_datap->db_type = M_DATA;
-	/* XXX should use dl_dest_addr_offset/length here,
-	   but we would have to translate ETHERTYPE_IP -> PPP_IP */
-	mp->b_wptr = mp->b_rptr + PPP_HDRLEN;
-	mp->b_rptr[0] = PPP_ALLSTATIONS;
-	mp->b_rptr[1] = PPP_UI;
-	mp->b_rptr[2] = us->sap >> 8;
-	mp->b_rptr[3] = us->sap;
-	if (pass_packet(us, mp, 1)) {
-	    if (!send_data(mp, us))
-		putq(q, mp);
-	}
-	return;
-
-#if DL_CURRENT_VERSION >= 2
-    case DL_PHYS_ADDR_REQ:
-	if (size < sizeof(dl_phys_addr_req_t))
-	    goto badprim;
-
-	/*
-	 * Don't check state because ifconfig sends this one down too
-	 */
-
-	if ((reply = allocb(sizeof(dl_phys_addr_ack_t)+ETHERADDRL, 
-			BPRI_HI)) == 0)
-	    break;		/* should do bufcall */
-	reply->b_datap->db_type = M_PCPROTO;
-	paddrack = (dl_phys_addr_ack_t *) reply->b_wptr;
-	reply->b_wptr += sizeof(dl_phys_addr_ack_t);
-	bzero((caddr_t) paddrack, sizeof(dl_phys_addr_ack_t)+ETHERADDRL);
-	paddrack->dl_primitive = DL_PHYS_ADDR_ACK;
-	paddrack->dl_addr_length = ETHERADDRL;
-	paddrack->dl_addr_offset = sizeof(dl_phys_addr_ack_t);
-	bcopy(&eaddr, reply->b_wptr, ETHERADDRL);
-	reply->b_wptr += ETHERADDRL;
-	qreply(q, reply);
-	break;
-
-#if defined(SOL2)
-    case DL_PROMISCON_REQ:
-	if (size < sizeof(dl_promiscon_req_t))
-	    goto badprim;
-	us->flags |= US_PROMISC;
-	dlpi_ok(q, DL_PROMISCON_REQ);
-	break;
-
-    case DL_PROMISCOFF_REQ:
-	if (size < sizeof(dl_promiscoff_req_t))
-	    goto badprim;
-	us->flags &= ~US_PROMISC;
-	dlpi_ok(q, DL_PROMISCOFF_REQ);
-	break;
-#else
-    case DL_PROMISCON_REQ:	    /* fall thru */
-    case DL_PROMISCOFF_REQ:	    /* fall thru */
-#endif /* defined(SOL2) */
-#endif /* DL_CURRENT_VERSION >= 2 */
-
-#if DL_CURRENT_VERSION >= 2
-    case DL_SET_PHYS_ADDR_REQ:
-    case DL_SUBS_BIND_REQ:
-    case DL_SUBS_UNBIND_REQ:
-    case DL_ENABMULTI_REQ:
-    case DL_DISABMULTI_REQ:
-    case DL_XID_REQ:
-    case DL_TEST_REQ:
-    case DL_REPLY_UPDATE_REQ:
-    case DL_REPLY_REQ:
-    case DL_DATA_ACK_REQ:
-#endif
-    case DL_CONNECT_REQ:
-    case DL_TOKEN_REQ:
-	dlpi_error(q, us, d->dl_primitive, DL_NOTSUPPORTED, 0);
-	break;
-
-    case DL_CONNECT_RES:
-    case DL_DISCONNECT_REQ:
-    case DL_RESET_REQ:
-    case DL_RESET_RES:
-	dlpi_error(q, us, d->dl_primitive, DL_OUTSTATE, 0);
-	break;
-
-    case DL_UDQOS_REQ:
-	dlpi_error(q, us, d->dl_primitive, DL_BADQOSTYPE, 0);
-	break;
-
-#if DL_CURRENT_VERSION >= 2
-    case DL_TEST_RES:
-    case DL_XID_RES:
-	break;
-#endif
-
-    default:
-	cmn_err(CE_CONT, "ppp: unknown dlpi prim 0x%x\n", d->dl_primitive);
-	/* fall through */
-    badprim:
-	dlpi_error(q, us, d->dl_primitive, DL_BADPRIM, 0);
-	break;
-    }
-    freemsg(mp);
-}
-
-static void
-dlpi_error(q, us, prim, err, uerr)
-    queue_t *q;
-    upperstr_t *us;
-    int prim, err, uerr;
-{
-    mblk_t *reply;
-    dl_error_ack_t *errp;
-
-    if (us->flags & US_DBGLOG)
-        DPRINT3("ppp/%d: dlpi error, prim=%x, err=%x\n", us->mn, prim, err);
-    reply = allocb(sizeof(dl_error_ack_t), BPRI_HI);
-    if (reply == 0)
-	return;			/* XXX should do bufcall */
-    reply->b_datap->db_type = M_PCPROTO;
-    errp = (dl_error_ack_t *) reply->b_wptr;
-    reply->b_wptr += sizeof(dl_error_ack_t);
-    errp->dl_primitive = DL_ERROR_ACK;
-    errp->dl_error_primitive = prim;
-    errp->dl_errno = err;
-    errp->dl_unix_errno = uerr;
-    qreply(q, reply);
-}
-
-static void
-dlpi_ok(q, prim)
-    queue_t *q;
-    int prim;
-{
-    mblk_t *reply;
-    dl_ok_ack_t *okp;
-
-    reply = allocb(sizeof(dl_ok_ack_t), BPRI_HI);
-    if (reply == 0)
-	return;			/* XXX should do bufcall */
-    reply->b_datap->db_type = M_PCPROTO;
-    okp = (dl_ok_ack_t *) reply->b_wptr;
-    reply->b_wptr += sizeof(dl_ok_ack_t);
-    okp->dl_primitive = DL_OK_ACK;
-    okp->dl_correct_primitive = prim;
-    qreply(q, reply);
-}
-#endif /* NO_DLPI */
-
-static int
-pass_packet(us, mp, outbound)
-    upperstr_t *us;
-    mblk_t *mp;
-    int outbound;
-{
-    int pass;
-    upperstr_t *ppa;
-
-    if ((ppa = us->ppa) == 0) {
-	freemsg(mp);
-	return 0;
-    }
-
-#ifdef FILTER_PACKETS
-    pass = ip_hard_filter(us, mp, outbound);
-#else
-    /*
-     * Here is where we might, in future, decide whether to pass
-     * or drop the packet, and whether it counts as link activity.
-     */
-    pass = 1;
-#endif /* FILTER_PACKETS */
-
-    if (pass < 0) {
-	/* pass only if link already up, and don't update time */
-	if (ppa->lowerq == 0) {
-	    freemsg(mp);
-	    return 0;
-	}
-	pass = 1;
-    } else if (pass) {
-	if (outbound)
-	    ppa->last_sent = time;
-	else
-	    ppa->last_recv = time;
-    }
-
-    return pass;
-}
-
-/*
- * We have some data to send down to the lower stream (or up the
- * control stream, if we don't have a lower stream attached).
- * Returns 1 if the message was dealt with, 0 if it wasn't able
- * to be sent on and should therefore be queued up.
- */
-static int
-send_data(mp, us)
-    mblk_t *mp;
-    upperstr_t *us;
-{
-    upperstr_t *ppa;
-
-    if ((us->flags & US_BLOCKED) || us->npmode == NPMODE_QUEUE)
-	return 0;
-    ppa = us->ppa;
-    if (ppa == 0 || us->npmode == NPMODE_DROP || us->npmode == NPMODE_ERROR) {
-	if (us->flags & US_DBGLOG)
-	    DPRINT2("ppp/%d: dropping pkt (npmode=%d)\n", us->mn, us->npmode);
-	freemsg(mp);
-	return 1;
-    }
-    if (ppa->lowerq == 0) {
-	/* try to send it up the control stream */
-        if (bcanputnext(ppa->q, mp->b_band)) {
-	    /*
-	     * The message seems to get corrupted for some reason if
-	     * we just send the message up as it is, so we send a copy.
-	     */
-	    mblk_t *np = copymsg(mp);
-	    freemsg(mp);
-	    if (np != 0)
-		putnext(ppa->q, np);
-	    return 1;
-	}
-    } else {
-        if (bcanputnext(ppa->lowerq, mp->b_band)) {
-	    MT_ENTER(&ppa->stats_lock);
-	    ppa->stats.ppp_opackets++;
-	    ppa->stats.ppp_obytes += msgdsize(mp);
-#ifdef INCR_OPACKETS
-	    INCR_OPACKETS(ppa);
-#endif
-	    MT_EXIT(&ppa->stats_lock);
-	    /*
-	     * The lower queue is only ever detached while holding an
-	     * exclusive lock on the whole driver.  So we can be confident
-	     * that the lower queue is still there.
-	     */
-	    putnext(ppa->lowerq, mp);
-	    return 1;
-	}
-    }
-    us->flags |= US_BLOCKED;
-    return 0;
-}
-
-/*
- * Allocate a new PPA id and link this stream into the list of PPAs.
- * This procedure is called with an exclusive lock on all queues in
- * this driver.
- */
-static void
-new_ppa(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *up, **usp;
-    int ppa_id;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("new_ppa: q_ptr = 0!\n");
-	return;
-    }
-
-    usp = &ppas;
-    ppa_id = 0;
-    while ((up = *usp) != 0 && ppa_id == up->ppa_id) {
-	++ppa_id;
-	usp = &up->nextppa;
-    }
-    us->ppa_id = ppa_id;
-    us->ppa = us;
-    us->next = 0;
-    us->nextppa = *usp;
-    *usp = us;
-    us->flags |= US_CONTROL;
-    us->npmode = NPMODE_PASS;
-
-    us->mtu = PPP_MTU;
-    us->mru = PPP_MRU;
-
-#ifdef SOL2
-    /*
-     * Create a kstats record for our statistics, so netstat -i works.
-     */
-    if (us->kstats == 0) {
-	char unit[32];
-
-	sprintf(unit, "ppp%d", us->ppa->ppa_id);
-	us->kstats = kstat_create("ppp", us->ppa->ppa_id, unit,
-				  "net", KSTAT_TYPE_NAMED, 4, 0);
-	if (us->kstats != 0) {
-	    kstat_named_t *kn = KSTAT_NAMED_PTR(us->kstats);
-
-	    strcpy(kn[0].name, "ipackets");
-	    kn[0].data_type = KSTAT_DATA_ULONG;
-	    strcpy(kn[1].name, "ierrors");
-	    kn[1].data_type = KSTAT_DATA_ULONG;
-	    strcpy(kn[2].name, "opackets");
-	    kn[2].data_type = KSTAT_DATA_ULONG;
-	    strcpy(kn[3].name, "oerrors");
-	    kn[3].data_type = KSTAT_DATA_ULONG;
-	    kstat_install(us->kstats);
-	}
-    }
-#endif /* SOL2 */
-
-    *(int *)mp->b_cont->b_rptr = ppa_id;
-    mp->b_datap->db_type = M_IOCACK;
-    qreply(q, mp);
-}
-
-static void
-attach_ppa(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *t;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("attach_ppa: q_ptr = 0!\n");
-	return;
-    }
-
-#ifndef NO_DLPI
-    us->state = DL_UNBOUND;
-#endif
-    for (t = us->ppa; t->next != 0; t = t->next)
-	;
-    t->next = us;
-    us->next = 0;
-    if (mp->b_datap->db_type == M_IOCTL) {
-	mp->b_datap->db_type = M_IOCACK;
-	qreply(q, mp);
-    } else {
-#ifndef NO_DLPI
-	dlpi_ok(q, DL_ATTACH_REQ);
-#endif
-    }
-}
-
-static void
-detach_ppa(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *t;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("detach_ppa: q_ptr = 0!\n");
-	return;
-    }
-
-    for (t = us->ppa; t->next != 0; t = t->next)
-	if (t->next == us) {
-	    t->next = us->next;
-	    break;
-	}
-    us->next = 0;
-    us->ppa = 0;
-#ifndef NO_DLPI
-    us->state = DL_UNATTACHED;
-    dlpi_ok(q, DL_DETACH_REQ);
-#endif
-}
-
-/*
- * We call this with qwriter in order to give the upper queue procedures
- * the guarantee that the lower queue is not going to go away while
- * they are executing.
- */
-static void
-detach_lower(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("detach_lower: q_ptr = 0!\n");
-	return;
-    }
-
-    LOCK_LOWER_W;
-    us->lowerq->q_ptr = 0;
-    RD(us->lowerq)->q_ptr = 0;
-    us->lowerq = 0;
-    UNLOCK_LOWER;
-
-    /* Unblock streams which now feed back up the control stream. */
-    qenable(us->q);
-
-    mp->b_datap->db_type = M_IOCACK;
-    qreply(q, mp);
-}
-
-static int
-pppuwsrv(q)
-    queue_t *q;
-{
-    upperstr_t *us, *as;
-    mblk_t *mp;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("pppuwsrv: q_ptr = 0!\n");
-	return 0;
-    }
-
-    /*
-     * If this is a control stream, then this service procedure
-     * probably got enabled because of flow control in the lower
-     * stream being enabled (or because of the lower stream going
-     * away).  Therefore we enable the service procedure of all
-     * attached upper streams.
-     */
-    if (us->flags & US_CONTROL) {
-	for (as = us->next; as != 0; as = as->next)
-	    qenable(WR(as->q));
-    }
-
-    /* Try to send on any data queued here. */
-    us->flags &= ~US_BLOCKED;
-    while ((mp = getq(q)) != 0) {
-	if (!send_data(mp, us)) {
-	    putbq(q, mp);
-	    break;
-	}
-    }
-
-    return 0;
-}
-
-/* should never get called... */
-static int
-ppplwput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    putnext(q, mp);
-    return 0;
-}
-
-static int
-ppplwsrv(q)
-    queue_t *q;
-{
-    queue_t *uq;
-
-    /*
-     * Flow control has back-enabled this stream:
-     * enable the upper write service procedure for
-     * the upper control stream for this lower stream.
-     */
-    LOCK_LOWER_R;
-    uq = (queue_t *) q->q_ptr;
-    if (uq != 0)
-	qenable(uq);
-    UNLOCK_LOWER;
-    return 0;
-}
-
-/*
- * This should only get called for control streams.
- */
-static int
-pppurput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *ppa, *us;
-    int proto, len;
-    struct iocblk *iop;
-
-    ppa = (upperstr_t *) q->q_ptr;
-    if (ppa == 0) {
-	DPRINT("pppurput: q_ptr = 0!\n");
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-    case M_CTL:
-	MT_ENTER(&ppa->stats_lock);
-	switch (*mp->b_rptr) {
-	case PPPCTL_IERROR:
-#ifdef INCR_IERRORS
-	    INCR_IERRORS(ppa);
-#endif
-	    ppa->stats.ppp_ierrors++;
-	    break;
-	case PPPCTL_OERROR:
-#ifdef INCR_OERRORS
-	    INCR_OERRORS(ppa);
-#endif
-	    ppa->stats.ppp_oerrors++;
-	    break;
-	}
-	MT_EXIT(&ppa->stats_lock);
-	freemsg(mp);
-	break;
-
-    case M_IOCACK:
-    case M_IOCNAK:
-	/*
-	 * Attempt to match up the response with the stream
-	 * that the request came from.
-	 */
-	iop = (struct iocblk *) mp->b_rptr;
-	for (us = ppa; us != 0; us = us->next)
-	    if (us->ioc_id == iop->ioc_id)
-		break;
-	if (us == 0)
-	    freemsg(mp);
-	else
-	    putnext(us->q, mp);
-	break;
-
-    case M_HANGUP:
-	/*
-	 * The serial device has hung up.  We don't want to send
-	 * the M_HANGUP message up to pppd because that will stop
-	 * us from using the control stream any more.  Instead we
-	 * send a zero-length message as an end-of-file indication.
-	 */
-	freemsg(mp);
-	mp = allocb(1, BPRI_HI);
-	if (mp == 0) {
-	    DPRINT1("ppp/%d: couldn't allocate eof message!\n", ppa->mn);
-	    break;
-	}
-	putnext(ppa->q, mp);
-	break;
-
-    default:
-	if (mp->b_datap->db_type == M_DATA) {
-	    len = msgdsize(mp);
-	    if (mp->b_wptr - mp->b_rptr < PPP_HDRLEN) {
-		PULLUP(mp, PPP_HDRLEN);
-		if (mp == 0) {
-		    DPRINT1("ppp_urput: msgpullup failed (len=%d)\n", len);
-		    break;
-		}
-	    }
-	    MT_ENTER(&ppa->stats_lock);
-	    ppa->stats.ppp_ipackets++;
-	    ppa->stats.ppp_ibytes += len;
-#ifdef INCR_IPACKETS
-	    INCR_IPACKETS(ppa);
-#endif
-	    MT_EXIT(&ppa->stats_lock);
-
-	    proto = PPP_PROTOCOL(mp->b_rptr);
-
-#if defined(SOL2)
-	    /*
-	     * Should there be any promiscuous stream(s), send the data
-	     * up for each promiscuous stream that we recognize.
-	     */
-	    promisc_sendup(ppa, mp, proto, 1);
-#endif /* defined(SOL2) */
-
-	    if (proto < 0x8000 && (us = find_dest(ppa, proto)) != 0) {
-		/*
-		 * A data packet for some network protocol.
-		 * Queue it on the upper stream for that protocol.
-		 * XXX could we just putnext it?  (would require thought)
-		 * The rblocked flag is there to ensure that we keep
-		 * messages in order for each network protocol.
-		 */
-		if (!pass_packet(us, mp, 0))
-		    break;
-		if (!us->rblocked && !canput(us->q))
-		    us->rblocked = 1;
-		if (!us->rblocked)
-		    putq(us->q, mp);
-		else
-		    putq(q, mp);
-		break;
-	    }
-	}
-	/*
-	 * A control frame, a frame for an unknown protocol,
-	 * or some other message type.
-	 * Send it up to pppd via the control stream.
-	 */
-	if (queclass(mp) == QPCTL || canputnext(ppa->q))
-	    putnext(ppa->q, mp);
-	else
-	    putq(q, mp);
-	break;
-    }
-
-    return 0;
-}
-
-static int
-pppursrv(q)
-    queue_t *q;
-{
-    upperstr_t *us, *as;
-    mblk_t *mp, *hdr;
-#ifndef NO_DLPI
-    dl_unitdata_ind_t *ud;
-#endif
-    int proto;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("pppursrv: q_ptr = 0!\n");
-	return 0;
-    }
-
-    if (us->flags & US_CONTROL) {
-	/*
-	 * A control stream.
-	 * If there is no lower queue attached, run the write service
-	 * routines of other upper streams attached to this PPA.
-	 */
-	if (us->lowerq == 0) {
-	    as = us;
-	    do {
-		if (as->flags & US_BLOCKED)
-		    qenable(WR(as->q));
-		as = as->next;
-	    } while (as != 0);
-	}
-
-	/*
-	 * Messages get queued on this stream's read queue if they
-	 * can't be queued on the read queue of the attached stream
-	 * that they are destined for.  This is for flow control -
-	 * when this queue fills up, the lower read put procedure will
-	 * queue messages there and the flow control will propagate
-	 * down from there.
-	 */
-	while ((mp = getq(q)) != 0) {
-	    proto = PPP_PROTOCOL(mp->b_rptr);
-	    if (proto < 0x8000 && (as = find_dest(us, proto)) != 0) {
-		if (!canput(as->q))
-		    break;
-		putq(as->q, mp);
-	    } else {
-		if (!canputnext(q))
-		    break;
-		putnext(q, mp);
-	    }
-	}
-	if (mp) {
-	    putbq(q, mp);
-	} else {
-	    /* can now put stuff directly on network protocol streams again */
-	    for (as = us->next; as != 0; as = as->next)
-		as->rblocked = 0;
-	}
-
-	/*
-	 * If this stream has a lower stream attached,
-	 * enable the read queue's service routine.
-	 * XXX we should really only do this if the queue length
-	 * has dropped below the low-water mark.
-	 */
-	if (us->lowerq != 0)
-	    qenable(RD(us->lowerq));
-		
-    } else {
-	/*
-	 * A network protocol stream.  Put a DLPI header on each
-	 * packet and send it on.
-	 * (Actually, it seems that the IP module will happily
-	 * accept M_DATA messages without the DL_UNITDATA_IND header.)
-	 */
-	while ((mp = getq(q)) != 0) {
-	    if (!canputnext(q)) {
-		putbq(q, mp);
-		break;
-	    }
-#ifndef NO_DLPI
-	    proto = PPP_PROTOCOL(mp->b_rptr);
-	    mp->b_rptr += PPP_HDRLEN;
-	    hdr = allocb(sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint),
-			 BPRI_MED);
-	    if (hdr == 0) {
-		/* XXX should put it back and use bufcall */
-		freemsg(mp);
-		continue;
-	    }
-	    hdr->b_datap->db_type = M_PROTO;
-	    ud = (dl_unitdata_ind_t *) hdr->b_wptr;
-	    hdr->b_wptr += sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint);
-	    hdr->b_cont = mp;
-	    ud->dl_primitive = DL_UNITDATA_IND;
-	    ud->dl_dest_addr_length = sizeof(uint);
-	    ud->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t);
-	    ud->dl_src_addr_length = sizeof(uint);
-	    ud->dl_src_addr_offset = ud->dl_dest_addr_offset + sizeof(uint);
-#if DL_CURRENT_VERSION >= 2
-	    ud->dl_group_address = 0;
-#endif
-	    /* Send the DLPI client the data with the SAP they requested,
-	       (e.g. ETHERTYPE_IP) rather than the PPP protocol number
-	       (e.g. PPP_IP) */
-	    ((uint *)(ud + 1))[0] = us->req_sap;	/* dest SAP */
-	    ((uint *)(ud + 1))[1] = us->req_sap;	/* src SAP */
-	    putnext(q, hdr);
-#else /* NO_DLPI */
-	    putnext(q, mp);
-#endif /* NO_DLPI */
-	}
-	/*
-	 * Now that we have consumed some packets from this queue,
-	 * enable the control stream's read service routine so that we
-	 * can process any packets for us that might have got queued
-	 * there for flow control reasons.
-	 */
-	if (us->ppa)
-	    qenable(us->ppa->q);
-    }
-
-    return 0;
-}
-
-static upperstr_t *
-find_dest(ppa, proto)
-    upperstr_t *ppa;
-    int proto;
-{
-    upperstr_t *us;
-
-    for (us = ppa->next; us != 0; us = us->next)
-	if (proto == us->sap)
-	    break;
-    return us;
-}
-
-#if defined (SOL2)
-/*
- * Test upstream promiscuous conditions. As of now, only pass IPv4 and
- * Ipv6 packets upstream (let PPP packets be decoded elsewhere).
- */
-static upperstr_t *
-find_promisc(us, proto)
-    upperstr_t *us;
-    int proto;
-{
-
-    if ((proto != PPP_IP) && (proto != PPP_IPV6))
-	return (upperstr_t *)0;
-
-    for ( ; us; us = us->next) {
-	if ((us->flags & US_PROMISC) && (us->state == DL_IDLE))
-	    return us;
-    }
-
-    return (upperstr_t *)0;
-}
-
-/*
- * Prepend an empty Ethernet header to msg for snoop, et al.
- */
-static mblk_t *
-prepend_ether(us, mp, proto)
-    upperstr_t *us;
-    mblk_t *mp;
-    int proto;
-{
-    mblk_t *eh;
-    int type;
-
-    if ((eh = allocb(sizeof(struct ether_header), BPRI_HI)) == 0) {
-	freemsg(mp);
-	return (mblk_t *)0;
-    }
-
-    if (proto == PPP_IP)
-	type = ETHERTYPE_IP;
-    else if (proto == PPP_IPV6)
-	type = ETHERTYPE_IPV6;
-    else 
-	type = proto;	    /* What else? Let decoder decide */
-
-    eh->b_wptr += sizeof(struct ether_header);
-    bzero((caddr_t)eh->b_rptr, sizeof(struct ether_header));
-    ((struct ether_header *)eh->b_rptr)->ether_type = htons((short)type);
-    eh->b_cont = mp;
-    return (eh);
-}
-
-/*
- * Prepend DL_UNITDATA_IND mblk to msg
- */
-static mblk_t *
-prepend_udind(us, mp, proto)
-    upperstr_t *us;
-    mblk_t *mp;
-    int proto;
-{
-    dl_unitdata_ind_t *dlu;
-    mblk_t *dh;
-    size_t size;
-
-    size = sizeof(dl_unitdata_ind_t);
-    if ((dh = allocb(size, BPRI_MED)) == 0) {
-	freemsg(mp);
-	return (mblk_t *)0;
-    }
-
-    dh->b_datap->db_type = M_PROTO;
-    dh->b_wptr = dh->b_datap->db_lim;
-    dh->b_rptr = dh->b_wptr - size;
-
-    dlu = (dl_unitdata_ind_t *)dh->b_rptr;
-    dlu->dl_primitive = DL_UNITDATA_IND;
-    dlu->dl_dest_addr_length = 0;
-    dlu->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t);
-    dlu->dl_src_addr_length = 0;
-    dlu->dl_src_addr_offset = sizeof(dl_unitdata_ind_t);
-    dlu->dl_group_address = 0;
-
-    dh->b_cont = mp;
-    return (dh);
-}
-
-/*
- * For any recognized promiscuous streams, send data upstream
- */
-static void
-promisc_sendup(ppa, mp, proto, skip)
-    upperstr_t *ppa;
-    mblk_t *mp;
-    int proto, skip;
-{
-    mblk_t *dup_mp, *dup_dup_mp;
-    upperstr_t *prus, *nprus;
-
-    if ((prus = find_promisc(ppa, proto)) != 0) {
-	if (dup_mp = dupmsg(mp)) {
-
-	    if (skip)
-		dup_mp->b_rptr += PPP_HDRLEN;
-
-	    for ( ; nprus = find_promisc(prus->next, proto); 
-		    prus = nprus) {
-
-		if (dup_dup_mp = dupmsg(dup_mp)) {
-		    if (canputnext(prus->q)) {
-			if (prus->flags & US_RAWDATA) {
-			    dup_dup_mp = prepend_ether(prus, dup_dup_mp, proto);
-			    putnext(prus->q, dup_dup_mp);
-			} else {
-			    dup_dup_mp = prepend_udind(prus, dup_dup_mp, proto);
-			    putnext(prus->q, dup_dup_mp);
-			}
-		    } else {
-			DPRINT("ppp_urput: data to promisc q dropped\n");
-			freemsg(dup_dup_mp);
-		    }
-		}
-	    }
-
-	    if (canputnext(prus->q)) {
-		if (prus->flags & US_RAWDATA) {
-		    dup_mp = prepend_ether(prus, dup_mp, proto);
-		    putnext(prus->q, dup_mp);
-		} else {
-		    dup_mp = prepend_udind(prus, dup_mp, proto);
-		    putnext(prus->q, dup_mp);
-		}
-	    } else {
-		DPRINT("ppp_urput: data to promisc q dropped\n");
-		freemsg(dup_mp);
-	    }
-	}
-    }
-}
-#endif /* defined(SOL2) */
-
-/*
- * We simply put the message on to the associated upper control stream
- * (either here or in ppplrsrv).  That way we enter the perimeters
- * before looking through the list of attached streams to decide which
- * stream it should go up.
- */
-static int
-ppplrput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    queue_t *uq;
-    struct iocblk *iop;
-
-    switch (mp->b_datap->db_type) {
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	iop->ioc_error = EINVAL;
-	mp->b_datap->db_type = M_IOCNAK;
-	qreply(q, mp);
-	return 0;
-    case M_FLUSH:
-	if (*mp->b_rptr & FLUSHR)
-	    flushq(q, FLUSHDATA);
-	if (*mp->b_rptr & FLUSHW) {
-	    *mp->b_rptr &= ~FLUSHR;
-	    qreply(q, mp);
-	} else
-	    freemsg(mp);
-	return 0;
-    }
-
-    /*
-     * If we can't get the lower lock straight away, queue this one
-     * rather than blocking, to avoid the possibility of deadlock.
-     */
-    if (!TRYLOCK_LOWER_R) {
-	putq(q, mp);
-	return 0;
-    }
-
-    /*
-     * Check that we're still connected to the driver.
-     */
-    uq = (queue_t *) q->q_ptr;
-    if (uq == 0) {
-	UNLOCK_LOWER;
-	DPRINT1("ppplrput: q = %x, uq = 0??\n", q);
-	freemsg(mp);
-	return 0;
-    }
-
-    /*
-     * Try to forward the message to the put routine for the upper
-     * control stream for this lower stream.
-     * If there are already messages queued here, queue this one so
-     * they don't get out of order.
-     */
-    if (queclass(mp) == QPCTL || (qsize(q) == 0 && canput(uq)))
-	put(uq, mp);
-    else
-	putq(q, mp);
-
-    UNLOCK_LOWER;
-    return 0;
-}
-
-static int
-ppplrsrv(q)
-    queue_t *q;
-{
-    mblk_t *mp;
-    queue_t *uq;
-
-    /*
-     * Packets get queued here for flow control reasons
-     * or if the lrput routine couldn't get the lower lock
-     * without blocking.
-     */
-    LOCK_LOWER_R;
-    uq = (queue_t *) q->q_ptr;
-    if (uq == 0) {
-	UNLOCK_LOWER;
-	flushq(q, FLUSHALL);
-	DPRINT1("ppplrsrv: q = %x, uq = 0??\n", q);
-	return 0;
-    }
-    while ((mp = getq(q)) != 0) {
-	if (queclass(mp) == QPCTL || canput(uq))
-	    put(uq, mp);
-	else {
-	    putbq(q, mp);
-	    break;
-	}
-    }
-    UNLOCK_LOWER;
-    return 0;
-}
-
-static int
-putctl2(q, type, code, val)
-    queue_t *q;
-    int type, code, val;
-{
-    mblk_t *mp;
-
-    mp = allocb(2, BPRI_HI);
-    if (mp == 0)
-	return 0;
-    mp->b_datap->db_type = type;
-    mp->b_wptr[0] = code;
-    mp->b_wptr[1] = val;
-    mp->b_wptr += 2;
-    putnext(q, mp);
-    return 1;
-}
-
-static int
-putctl4(q, type, code, val)
-    queue_t *q;
-    int type, code, val;
-{
-    mblk_t *mp;
-
-    mp = allocb(4, BPRI_HI);
-    if (mp == 0)
-	return 0;
-    mp->b_datap->db_type = type;
-    mp->b_wptr[0] = code;
-    ((short *)mp->b_wptr)[1] = val;
-    mp->b_wptr += 4;
-    putnext(q, mp);
-    return 1;
-}
-
-static void
-debug_dump(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us;
-    queue_t *uq, *lq;
-
-    DPRINT("ppp upper streams:\n");
-    for (us = minor_devs; us != 0; us = us->nextmn) {
-	uq = us->q;
-	DPRINT3(" %d: q=%x rlev=%d",
-		us->mn, uq, (uq? qsize(uq): 0));
-	DPRINT3(" wlev=%d flags=0x%b", (uq? qsize(WR(uq)): 0),
-		us->flags, "\020\1priv\2control\3blocked\4last");
-	DPRINT3(" state=%x sap=%x req_sap=%x", us->state, us->sap,
-		us->req_sap);
-	if (us->ppa == 0)
-	    DPRINT(" ppa=?\n");
-	else
-	    DPRINT1(" ppa=%d\n", us->ppa->ppa_id);
-	if (us->flags & US_CONTROL) {
-	    lq = us->lowerq;
-	    DPRINT3("    control for %d lq=%x rlev=%d",
-		    us->ppa_id, lq, (lq? qsize(RD(lq)): 0));
-	    DPRINT3(" wlev=%d mru=%d mtu=%d\n",
-		    (lq? qsize(lq): 0), us->mru, us->mtu);
-	}
-    }
-    mp->b_datap->db_type = M_IOCACK;
-    qreply(q, mp);
-}
-
-#ifdef FILTER_PACKETS
-#include <netinet/in_systm.h>
-#include <netinet/ip.h>
-#include <netinet/udp.h>
-#include <netinet/tcp.h>
-
-#define MAX_IPHDR    128     /* max TCP/IP header size */
-
-
-/* The following table contains a hard-coded list of protocol/port pairs.
- * Any matching packets are either discarded unconditionally, or, 
- * if ok_if_link_up is non-zero when a connection does not currently exist
- * (i.e., they go through if the connection is present, but never initiate
- * a dial-out).
- * This idea came from a post by dm@garage.uun.org (David Mazieres)
- */
-static struct pktfilt_tab { 
-	int proto; 
-	u_short port; 
-	u_short ok_if_link_up; 
-} pktfilt_tab[] = {
-	{ IPPROTO_UDP,	520,	1 },	/* RIP, ok to pass if link is up */
-	{ IPPROTO_UDP,	123,	1 },	/* NTP, don't keep up the link for it */
-	{ -1, 		0,	0 }	/* terminator entry has port == -1 */
-};
-
-
-static int
-ip_hard_filter(us, mp, outbound)
-    upperstr_t *us;
-    mblk_t *mp;
-    int outbound;
-{
-    struct ip *ip;
-    struct pktfilt_tab *pft;
-    mblk_t *temp_mp;
-    int proto;
-    int len, hlen;
-
-
-    /* Note, the PPP header has already been pulled up in all cases */
-    proto = PPP_PROTOCOL(mp->b_rptr);
-    if (us->flags & US_DBGLOG)
-        DPRINT3("ppp/%d: filter, proto=0x%x, out=%d\n", us->mn, proto, outbound);
-
-    switch (proto)
-    {
-    case PPP_IP:
-	if ((mp->b_wptr - mp->b_rptr) == PPP_HDRLEN && mp->b_cont != 0) {
-	    temp_mp = mp->b_cont;
-    	    len = msgdsize(temp_mp);
-	    hlen = (len < MAX_IPHDR) ? len : MAX_IPHDR;
-	    PULLUP(temp_mp, hlen);
-	    if (temp_mp == 0) {
-		DPRINT2("ppp/%d: filter, pullup next failed, len=%d\n", 
-			us->mn, hlen);
-		mp->b_cont = 0;		/* PULLUP() freed the rest */
-	        freemsg(mp);
-	        return 0;
-	    }
-	    ip = (struct ip *)mp->b_cont->b_rptr;
-	}
-	else {
-	    len = msgdsize(mp);
-	    hlen = (len < (PPP_HDRLEN+MAX_IPHDR)) ? len : (PPP_HDRLEN+MAX_IPHDR);
-	    PULLUP(mp, hlen);
-	    if (mp == 0) {
-		DPRINT2("ppp/%d: filter, pullup failed, len=%d\n", 
-			us->mn, hlen);
-	        return 0;
-	    }
-	    ip = (struct ip *)(mp->b_rptr + PPP_HDRLEN);
-	}
-
-	/* For IP traffic, certain packets (e.g., RIP) may be either
-	 *   1.  ignored - dropped completely
-	 *   2.  will not initiate a connection, but
-	 *       will be passed if a connection is currently up.
-	 */
-	for (pft=pktfilt_tab; pft->proto != -1; pft++) {
-	    if (ip->ip_p == pft->proto) {
-		switch(pft->proto) {
-		case IPPROTO_UDP:
-		    if (((struct udphdr *) &((int *)ip)[ip->ip_hl])->uh_dport
-				== htons(pft->port)) goto endfor;
-		    break;
-		case IPPROTO_TCP:
-		    if (((struct tcphdr *) &((int *)ip)[ip->ip_hl])->th_dport
-				== htons(pft->port)) goto endfor;
-		    break;
-		}	
-	    }
-	}
-	endfor:
-	if (pft->proto != -1) {
-	    if (us->flags & US_DBGLOG)
-		DPRINT3("ppp/%d: found IP pkt, proto=0x%x (%d)\n", 
-				us->mn, pft->proto, pft->port);
-	    /* Discard if not connected, or if not pass_with_link_up */
-	    /* else, if link is up let go by, but don't update time */
-	    return pft->ok_if_link_up? -1: 0;
-	}
-        break;
-    } /* end switch (proto) */
-
-    return 1;
-}
-#endif /* FILTER_PACKETS */
-
diff --git a/mdk-stage1/ppp/modules/ppp_ahdlc.c b/mdk-stage1/ppp/modules/ppp_ahdlc.c
deleted file mode 100644
index d0b961258..000000000
--- a/mdk-stage1/ppp/modules/ppp_ahdlc.c
+++ /dev/null
@@ -1,878 +0,0 @@
-/*
- * ppp_ahdlc.c - STREAMS module for doing PPP asynchronous HDLC.
- *
- * Re-written by Adi Masputra <adi.masputra@sun.com>, based on 
- * the original ppp_ahdlc.c
- *
- * Copyright (c) 2000 by Sun Microsystems, Inc.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  
- *
- * SUN MAKES NO REPRESENTATION OR WARRANTIES ABOUT THE SUITABILITY OF
- * THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
- * TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
- * PARTICULAR PURPOSE, OR NON-INFRINGEMENT.  SUN SHALL NOT BE LIABLE FOR
- * ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR
- * DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2, SVR4, SunOS 4, and Digital UNIX.
- */
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stream.h>
-#include <sys/errno.h>
-
-#ifdef SVR4
-#include <sys/conf.h>
-#include <sys/kmem.h>
-#include <sys/cmn_err.h>
-#include <sys/ddi.h>
-#else
-#include <sys/user.h>
-#ifdef __osf__
-#include <sys/cmn_err.h>
-#endif
-#endif /* SVR4 */
-
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-/*
- * Right now, mutex is only enabled for Solaris 2.x
- */
-#if defined(SOL2)
-#define USE_MUTEX
-#endif /* SOL2 */
-
-/*
- * intpointer_t and uintpointer_t are signed and unsigned integer types 
- * large enough to hold any data pointer; that is, data pointers can be 
- * assigned into or from these integer types without losing precision.
- * On recent Solaris releases, these types are defined in sys/int_types.h,
- * but not on SunOS 4.x or the earlier Solaris versions.
- */
-#if defined(_LP64) || defined(_I32LPx)
-typedef long                    intpointer_t;
-typedef unsigned long           uintpointer_t;
-#else
-typedef int                     intpointer_t;
-typedef unsigned int            uintpointer_t;
-#endif
-
-MOD_OPEN_DECL(ahdlc_open);
-MOD_CLOSE_DECL(ahdlc_close);
-static int ahdlc_wput __P((queue_t *, mblk_t *));
-static int ahdlc_rput __P((queue_t *, mblk_t *));
-static void ahdlc_encode __P((queue_t *, mblk_t *));
-static void ahdlc_decode __P((queue_t *, mblk_t *));
-static int msg_byte __P((mblk_t *, unsigned int));
-
-#if defined(SOL2)
-/*
- * Don't send HDLC start flag is last transmit is within 1.5 seconds -
- * FLAG_TIME is defined is microseconds
- */
-#define FLAG_TIME   1500
-#define ABS(x)	    (x >= 0 ? x : (-x))
-#endif /* SOL2 */
-
-/*
- * Extract byte i of message mp 
- */
-#define MSG_BYTE(mp, i)	((i) < (mp)->b_wptr - (mp)->b_rptr? (mp)->b_rptr[i]: \
-			 msg_byte((mp), (i)))
-
-/* 
- * Is this LCP packet one we have to transmit using LCP defaults? 
- */
-#define LCP_USE_DFLT(mp)	(1 <= (code = MSG_BYTE((mp), 4)) && code <= 7)
-
-/*
- * Standard STREAMS declarations
- */
-static struct module_info minfo = {
-    0x7d23, "ppp_ahdl", 0, INFPSZ, 32768, 512
-};
-
-static struct qinit rinit = {
-    ahdlc_rput, NULL, ahdlc_open, ahdlc_close, NULL, &minfo, NULL
-};
-
-static struct qinit winit = {
-    ahdlc_wput, NULL, NULL, NULL, NULL, &minfo, NULL
-};
-
-#if defined(SVR4) && !defined(SOL2)
-int phdldevflag = 0;
-#define ppp_ahdlcinfo phdlinfo
-#endif /* defined(SVR4) && !defined(SOL2) */
-
-struct streamtab ppp_ahdlcinfo = {
-    &rinit,			    /* ptr to st_rdinit */
-    &winit,			    /* ptr to st_wrinit */
-    NULL,			    /* ptr to st_muxrinit */
-    NULL,			    /* ptr to st_muxwinit */
-#if defined(SUNOS4)
-    NULL			    /* ptr to ptr to st_modlist */
-#endif /* SUNOS4 */
-};
-
-#if defined(SUNOS4)
-int ppp_ahdlc_count = 0;	    /* open counter */
-#endif /* SUNOS4 */
-
-/*
- * Per-stream state structure
- */
-typedef struct ahdlc_state {
-#if defined(USE_MUTEX)
-    kmutex_t	    lock;		    /* lock for this structure */
-#endif /* USE_MUTEX */
-    int		    flags;		    /* link flags */
-    mblk_t	    *rx_buf;		    /* ptr to receive buffer */
-    int		    rx_buf_size;	    /* receive buffer size */
-    ushort_t	    infcs;		    /* calculated rx HDLC FCS */
-    u_int32_t	    xaccm[8];		    /* 256-bit xmit ACCM */
-    u_int32_t	    raccm;		    /* 32-bit rcv ACCM */
-    int		    mtu;		    /* interface MTU */
-    int		    mru;		    /* link MRU */
-    int		    unit;		    /* current PPP unit number */
-    struct pppstat  stats;		    /* statistic structure */
-#if defined(SOL2)
-    clock_t	    flag_time;		    /* time in usec between flags */
-    clock_t	    lbolt;		    /* last updated lbolt */
-#endif /* SOL2 */
-} ahdlc_state_t;
-
-/*
- * Values for flags 
- */
-#define ESCAPED		0x100	/* last saw escape char on input */
-#define IFLUSH		0x200	/* flushing input due to error */
-
-/* 
- * RCV_B7_1, etc., defined in net/pppio.h, are stored in flags also. 
- */
-#define RCV_FLAGS	(RCV_B7_1|RCV_B7_0|RCV_ODDP|RCV_EVNP)
-
-/*
- * FCS lookup table as calculated by genfcstab.
- */
-static u_short fcstab[256] = {
-	0x0000,	0x1189,	0x2312,	0x329b,	0x4624,	0x57ad,	0x6536,	0x74bf,
-	0x8c48,	0x9dc1,	0xaf5a,	0xbed3,	0xca6c,	0xdbe5,	0xe97e,	0xf8f7,
-	0x1081,	0x0108,	0x3393,	0x221a,	0x56a5,	0x472c,	0x75b7,	0x643e,
-	0x9cc9,	0x8d40,	0xbfdb,	0xae52,	0xdaed,	0xcb64,	0xf9ff,	0xe876,
-	0x2102,	0x308b,	0x0210,	0x1399,	0x6726,	0x76af,	0x4434,	0x55bd,
-	0xad4a,	0xbcc3,	0x8e58,	0x9fd1,	0xeb6e,	0xfae7,	0xc87c,	0xd9f5,
-	0x3183,	0x200a,	0x1291,	0x0318,	0x77a7,	0x662e,	0x54b5,	0x453c,
-	0xbdcb,	0xac42,	0x9ed9,	0x8f50,	0xfbef,	0xea66,	0xd8fd,	0xc974,
-	0x4204,	0x538d,	0x6116,	0x709f,	0x0420,	0x15a9,	0x2732,	0x36bb,
-	0xce4c,	0xdfc5,	0xed5e,	0xfcd7,	0x8868,	0x99e1,	0xab7a,	0xbaf3,
-	0x5285,	0x430c,	0x7197,	0x601e,	0x14a1,	0x0528,	0x37b3,	0x263a,
-	0xdecd,	0xcf44,	0xfddf,	0xec56,	0x98e9,	0x8960,	0xbbfb,	0xaa72,
-	0x6306,	0x728f,	0x4014,	0x519d,	0x2522,	0x34ab,	0x0630,	0x17b9,
-	0xef4e,	0xfec7,	0xcc5c,	0xddd5,	0xa96a,	0xb8e3,	0x8a78,	0x9bf1,
-	0x7387,	0x620e,	0x5095,	0x411c,	0x35a3,	0x242a,	0x16b1,	0x0738,
-	0xffcf,	0xee46,	0xdcdd,	0xcd54,	0xb9eb,	0xa862,	0x9af9,	0x8b70,
-	0x8408,	0x9581,	0xa71a,	0xb693,	0xc22c,	0xd3a5,	0xe13e,	0xf0b7,
-	0x0840,	0x19c9,	0x2b52,	0x3adb,	0x4e64,	0x5fed,	0x6d76,	0x7cff,
-	0x9489,	0x8500,	0xb79b,	0xa612,	0xd2ad,	0xc324,	0xf1bf,	0xe036,
-	0x18c1,	0x0948,	0x3bd3,	0x2a5a,	0x5ee5,	0x4f6c,	0x7df7,	0x6c7e,
-	0xa50a,	0xb483,	0x8618,	0x9791,	0xe32e,	0xf2a7,	0xc03c,	0xd1b5,
-	0x2942,	0x38cb,	0x0a50,	0x1bd9,	0x6f66,	0x7eef,	0x4c74,	0x5dfd,
-	0xb58b,	0xa402,	0x9699,	0x8710,	0xf3af,	0xe226,	0xd0bd,	0xc134,
-	0x39c3,	0x284a,	0x1ad1,	0x0b58,	0x7fe7,	0x6e6e,	0x5cf5,	0x4d7c,
-	0xc60c,	0xd785,	0xe51e,	0xf497,	0x8028,	0x91a1,	0xa33a,	0xb2b3,
-	0x4a44,	0x5bcd,	0x6956,	0x78df,	0x0c60,	0x1de9,	0x2f72,	0x3efb,
-	0xd68d,	0xc704,	0xf59f,	0xe416,	0x90a9,	0x8120,	0xb3bb,	0xa232,
-	0x5ac5,	0x4b4c,	0x79d7,	0x685e,	0x1ce1,	0x0d68,	0x3ff3,	0x2e7a,
-	0xe70e,	0xf687,	0xc41c,	0xd595,	0xa12a,	0xb0a3,	0x8238,	0x93b1,
-	0x6b46,	0x7acf,	0x4854,	0x59dd,	0x2d62,	0x3ceb,	0x0e70,	0x1ff9,
-	0xf78f,	0xe606,	0xd49d,	0xc514,	0xb1ab,	0xa022,	0x92b9,	0x8330,
-	0x7bc7,	0x6a4e,	0x58d5,	0x495c,	0x3de3,	0x2c6a,	0x1ef1,	0x0f78
-};
-
-static u_int32_t paritytab[8] =
-{
-	0x96696996, 0x69969669, 0x69969669, 0x96696996,
-	0x69969669, 0x96696996, 0x96696996, 0x69969669
-};
-
-/*
- * STREAMS module open (entry) point
- */
-MOD_OPEN(ahdlc_open)
-{
-    ahdlc_state_t   *state;
-
-    /*
-     * Return if it's already opened
-     */
-    if (q->q_ptr) {
-	return 0;
-    }
-
-    /*
-     * This can only be opened as a module
-     */
-    if (sflag != MODOPEN) {
-	return 0;
-    }
-
-    state = (ahdlc_state_t *) ALLOC_NOSLEEP(sizeof(ahdlc_state_t));
-    if (state == 0)
-	OPEN_ERROR(ENOSR);
-    bzero((caddr_t) state, sizeof(ahdlc_state_t));
-
-    q->q_ptr	 = (caddr_t) state;
-    WR(q)->q_ptr = (caddr_t) state;
-
-#if defined(USE_MUTEX)
-    mutex_init(&state->lock, NULL, MUTEX_DEFAULT, NULL);
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    state->xaccm[0] = ~0;	    /* escape 0x00 through 0x1f */
-    state->xaccm[3] = 0x60000000;   /* escape 0x7d and 0x7e */
-    state->mru	    = PPP_MRU;	    /* default of 1500 bytes */
-#if defined(SOL2)
-    state->flag_time = drv_usectohz(FLAG_TIME);
-#endif /* SOL2 */
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */	
-
-#if defined(SUNOS4)
-    ppp_ahdlc_count++;
-#endif /* SUNOS4 */
-
-    qprocson(q);
-    
-    return 0;
-}
-
-/*
- * STREAMS module close (exit) point
- */
-MOD_CLOSE(ahdlc_close)
-{
-    ahdlc_state_t   *state;
-
-    qprocsoff(q);
-
-    state = (ahdlc_state_t *) q->q_ptr;
-
-    if (state == 0) {
-	DPRINT("state == 0 in ahdlc_close\n");
-	return 0;
-    }
-
-#if defined(USE_MUTEX)
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    if (state->rx_buf != 0) {
-	freemsg(state->rx_buf);
-	state->rx_buf = 0;
-    }
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-    mutex_destroy(&state->lock);
-#endif /* USE_MUTEX */
-
-    FREE(q->q_ptr, sizeof(ahdlc_state_t));
-    q->q_ptr	     = NULL;
-    OTHERQ(q)->q_ptr = NULL;
-
-#if defined(SUNOS4)
-    if (ppp_ahdlc_count)
-	ppp_ahdlc_count--;
-#endif /* SUNOS4 */
-    
-    return 0;
-}
-
-/*
- * Write side put routine
- */
-static int
-ahdlc_wput(q, mp)
-    queue_t	*q;
-    mblk_t	*mp;
-{
-    ahdlc_state_t  	*state;
-    struct iocblk  	*iop;
-    int		   	error;
-    mblk_t	   	*np;
-    struct ppp_stats	*psp;
-
-    state = (ahdlc_state_t *) q->q_ptr;
-    if (state == 0) {
-	DPRINT("state == 0 in ahdlc_wput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-    case M_DATA:
-	/*
-	 * A data packet - do character-stuffing and FCS, and
-	 * send it onwards.
-	 */
-	ahdlc_encode(q, mp);
-	freemsg(mp);
-	break;
-
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	error = EINVAL;
-	switch (iop->ioc_cmd) {
-	case PPPIO_XACCM:
-	    if ((iop->ioc_count < sizeof(u_int32_t)) || 
-		(iop->ioc_count > sizeof(ext_accm))) {
-		break;
-	    }
-	    if (mp->b_cont == 0) {
-		DPRINT1("ahdlc_wput/%d: PPPIO_XACCM b_cont = 0!\n", state->unit);
-		break;
-	    }
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    bcopy((caddr_t)mp->b_cont->b_rptr, (caddr_t)state->xaccm,
-		  iop->ioc_count);
-	    state->xaccm[2] &= ~0x40000000;	/* don't escape 0x5e */
-	    state->xaccm[3] |= 0x60000000;	/* do escape 0x7d, 0x7e */
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case PPPIO_RACCM:
-	    if (iop->ioc_count != sizeof(u_int32_t))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ahdlc_wput/%d: PPPIO_RACCM b_cont = 0!\n", state->unit);
-		break;
-	    }
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    bcopy((caddr_t)mp->b_cont->b_rptr, (caddr_t)&state->raccm,
-		  sizeof(u_int32_t));
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case PPPIO_GCLEAN:
-	    np = allocb(sizeof(int), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    *(int *)np->b_wptr = state->flags & RCV_FLAGS;
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    np->b_wptr += sizeof(int);
-	    iop->ioc_count = sizeof(int);
-	    error = 0;
-	    break;
-
-	case PPPIO_GETSTAT:
-	    np = allocb(sizeof(struct ppp_stats), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-	    psp = (struct ppp_stats *) np->b_wptr;
-	    np->b_wptr += sizeof(struct ppp_stats);
-	    bzero((caddr_t)psp, sizeof(struct ppp_stats));
-	    psp->p = state->stats;
-	    iop->ioc_count = sizeof(struct ppp_stats);
-	    error = 0;
-	    break;
-
-	case PPPIO_LASTMOD:
-	    /* we knew this anyway */
-	    error = 0;
-	    break;
-
-	default:
-	    error = -1;
-	    break;
-	}
-
-	if (error < 0)
-	    putnext(q, mp);
-	else if (error == 0) {
-	    mp->b_datap->db_type = M_IOCACK;
-	    qreply(q, mp);
-	} else {
-	    mp->b_datap->db_type = M_IOCNAK;
-	    iop->ioc_count = 0;
-	    iop->ioc_error = error;
-	    qreply(q, mp);
-	}
-	break;
-
-    case M_CTL:
-	switch (*mp->b_rptr) {
-	case PPPCTL_MTU:
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    state->mtu = ((unsigned short *)mp->b_rptr)[1];
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    freemsg(mp);
-	    break;
-	case PPPCTL_MRU:
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    state->mru = ((unsigned short *)mp->b_rptr)[1];
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    freemsg(mp);
-	    break;
-	case PPPCTL_UNIT:
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    state->unit = mp->b_rptr[1];
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    break;
-	default:
-	    putnext(q, mp);
-	}
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-/*
- * Read side put routine
- */
-static int
-ahdlc_rput(q, mp)
-    queue_t *q;
-    mblk_t  *mp;
-{
-    ahdlc_state_t *state;
-
-    state = (ahdlc_state_t *) q->q_ptr;
-    if (state == 0) {
-	DPRINT("state == 0 in ahdlc_rput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-    case M_DATA:
-	ahdlc_decode(q, mp);
-	freemsg(mp);
-	break;
-
-    case M_HANGUP:
-#if defined(USE_MUTEX)
-	mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	if (state->rx_buf != 0) {
-	    /* XXX would like to send this up for debugging */
-	    freemsg(state->rx_buf);
-	    state->rx_buf = 0;
-	}
-	state->flags = IFLUSH;
-#if defined(USE_MUTEX)
-	mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	putnext(q, mp);
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-    return 0;
-}
-
-/*
- * Extract bit c from map m, to determine if c needs to be escaped
- */
-#define IN_TX_MAP(c, m)	((m)[(c) >> 5] & (1 << ((c) & 0x1f)))
-
-static void
-ahdlc_encode(q, mp)
-    queue_t	*q;
-    mblk_t	*mp;
-{
-    ahdlc_state_t	*state;
-    u_int32_t		*xaccm, loc_xaccm[8];
-    ushort_t		fcs;
-    size_t		outmp_len;
-    mblk_t		*outmp, *tmp;
-    uchar_t		*dp, fcs_val;
-    int			is_lcp, code;
-#if defined(SOL2)
-    clock_t		lbolt;
-#endif /* SOL2 */
-
-    if (msgdsize(mp) < 4) {
-	return;
-    }
-
-    state = (ahdlc_state_t *)q->q_ptr;
-#if defined(USE_MUTEX)
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    /*
-     * Allocate an output buffer large enough to handle a case where all
-     * characters need to be escaped
-     */
-    outmp_len = (msgdsize(mp)	 << 1) +		/* input block x 2 */
-		(sizeof(fcs)	 << 2) +		/* HDLC FCS x 4 */
-		(sizeof(uchar_t) << 1);			/* HDLC flags x 2 */
-
-    outmp = allocb(outmp_len, BPRI_MED);
-    if (outmp == NULL) {
-	state->stats.ppp_oerrors++;
-#if defined(USE_MUTEX)
-	mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
-	return;
-    }
-
-#if defined(SOL2)
-    /*
-     * Check if our last transmit happenned within flag_time, using
-     * the system's LBOLT value in clock ticks
-     */
-    if (drv_getparm(LBOLT, &lbolt) != -1) {
-	if (ABS((clock_t)lbolt - state->lbolt) > state->flag_time) {
-	    *outmp->b_wptr++ = PPP_FLAG;
-	} 
-	state->lbolt = lbolt;
-    } else {
-	*outmp->b_wptr++ = PPP_FLAG;
-    }
-#else
-    /*
-     * If the driver below still has a message to process, skip the
-     * HDLC flag, otherwise, put one in the beginning
-     */
-    if (qsize(q->q_next) == 0) {
-	*outmp->b_wptr++ = PPP_FLAG;
-    }
-#endif
-
-    /*
-     * All control characters must be escaped for LCP packets with code
-     * values between 1 (Conf-Req) and 7 (Code-Rej).
-     */
-    is_lcp = ((MSG_BYTE(mp, 0) == PPP_ALLSTATIONS) && 
-	      (MSG_BYTE(mp, 1) == PPP_UI) && 
-	      (MSG_BYTE(mp, 2) == (PPP_LCP >> 8)) &&
-	      (MSG_BYTE(mp, 3) == (PPP_LCP & 0xff)) &&
-	      LCP_USE_DFLT(mp));
-
-    xaccm = state->xaccm;
-    if (is_lcp) {
-	bcopy((caddr_t)state->xaccm, (caddr_t)loc_xaccm, sizeof(loc_xaccm));
-	loc_xaccm[0] = ~0;	/* force escape on 0x00 through 0x1f */
-	xaccm = loc_xaccm;
-    }
-
-    fcs = PPP_INITFCS;		/* Initial FCS is 0xffff */
-
-    /*
-     * Process this block and the rest (if any) attached to the this one
-     */
-    for (tmp = mp; tmp; tmp = tmp->b_cont) {
-	if (tmp->b_datap->db_type == M_DATA) {
-	    for (dp = tmp->b_rptr; dp < tmp->b_wptr; dp++) {
-		fcs = PPP_FCS(fcs, *dp);
-		if (IN_TX_MAP(*dp, xaccm)) {
-		    *outmp->b_wptr++ = PPP_ESCAPE;
-		    *outmp->b_wptr++ = *dp ^ PPP_TRANS;
-		} else {
-		    *outmp->b_wptr++ = *dp;
-		}
-	    }
-	} else {
-	    continue;	/* skip if db_type is something other than M_DATA */
-	}
-    }
-
-    /*
-     * Append the HDLC FCS, making sure that escaping is done on any
-     * necessary bytes
-     */
-    fcs_val = (fcs ^ 0xffff) & 0xff;
-    if (IN_TX_MAP(fcs_val, xaccm)) {
-	*outmp->b_wptr++ = PPP_ESCAPE;
-	*outmp->b_wptr++ = fcs_val ^ PPP_TRANS;
-    } else {
-	*outmp->b_wptr++ = fcs_val;
-    }
-
-    fcs_val = ((fcs ^ 0xffff) >> 8) & 0xff;
-    if (IN_TX_MAP(fcs_val, xaccm)) {
-	*outmp->b_wptr++ = PPP_ESCAPE;
-	*outmp->b_wptr++ = fcs_val ^ PPP_TRANS;
-    } else {
-	*outmp->b_wptr++ = fcs_val;
-    }
-
-    /*
-     * And finally, append the HDLC flag, and send it away
-     */
-    *outmp->b_wptr++ = PPP_FLAG;
-
-    state->stats.ppp_obytes += msgdsize(outmp);
-    state->stats.ppp_opackets++;
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-
-    putnext(q, outmp);
-    return;
-}
-
-/*
- * Checks the 32-bit receive ACCM to see if the byte needs un-escaping
- */
-#define IN_RX_MAP(c, m)	((((unsigned int) (uchar_t) (c)) < 0x20) && \
-			(m) & (1 << (c)))
-
-
-/*
- * Process received characters.
- */
-static void
-ahdlc_decode(q, mp)
-    queue_t *q;
-    mblk_t  *mp;
-{
-    ahdlc_state_t   *state;
-    mblk_t	    *om;
-    uchar_t	    *dp;
-    ushort_t	    fcs;
-#if defined(SOL2)
-    mblk_t	    *zmp;
-#endif /* SOL2 */
-
-#if defined(SOL2)
-    /*
-     * In case the driver (or something below) doesn't send
-     * data upstream in one message block, concatenate everything
-     */
-    if (!((mp->b_wptr - mp->b_rptr == msgdsize(mp)) && 
-         ((intpointer_t)mp->b_rptr % sizeof(intpointer_t) == 0))) {
-
-	zmp = msgpullup(mp, -1);
-	freemsg(mp);
-	mp = zmp;
-	if (mp == 0)
-	    return; 
-    }
-#endif /* SOL2 */
-
-    state = (ahdlc_state_t *) q->q_ptr;
-
-#if defined(USE_MUTEX)
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    state->stats.ppp_ibytes += msgdsize(mp);
-
-    for (dp = mp->b_rptr; dp < mp->b_wptr; dp++) {
-
-	/*
-	 * This should detect the lack of 8-bit communication channel
-	 * which is necessary for PPP to work. In addition, it also
-	 * checks on the parity.
-	 */
-	if (*dp & 0x80)
-	    state->flags |= RCV_B7_1;
-	else
-	    state->flags |= RCV_B7_0;
-
-	if (paritytab[*dp >> 5] & (1 << (*dp & 0x1f)))
-	    state->flags |= RCV_ODDP;
-	else
-	    state->flags |= RCV_EVNP;
-
-	/*
-	 * So we have a HDLC flag ...
-	 */
-	if (*dp == PPP_FLAG) {
-
-	    /*
-	     * If we think that it marks the beginning of the frame,
-	     * then continue to process the next octects
-	     */
-	    if ((state->flags & IFLUSH) ||
-		(state->rx_buf == 0) ||
-		(msgdsize(state->rx_buf) == 0)) {
-
-		state->flags &= ~IFLUSH;
-		continue;
-	    }
-
-	    /*
-	     * We get here because the above condition isn't true,
-	     * in which case the HDLC flag was there to mark the end
-	     * of the frame (or so we think)
-	     */
-	    om = state->rx_buf;
-
-	    if (state->infcs == PPP_GOODFCS) {
-		state->stats.ppp_ipackets++;
-		adjmsg(om, -PPP_FCSLEN);
-		putnext(q, om);
-	    } else {
-		DPRINT2("ppp%d: bad fcs (len=%d)\n",
-                    state->unit, msgdsize(state->rx_buf));
-		freemsg(state->rx_buf);
-		state->flags &= ~(IFLUSH | ESCAPED);
-		state->stats.ppp_ierrors++;
-		putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-	    }
-
-	    state->rx_buf = 0;
-	    continue;
-	}
-
-	if (state->flags & IFLUSH) {
-	    continue;
-	}
-
-	/*
-	 * Allocate a receive buffer, large enough to store a frame (after
-	 * un-escaping) of at least 1500 octets. If MRU is negotiated to
-	 * be more than the default, then allocate that much. In addition,
-	 * we add an extra 32-bytes for a fudge factor
-	 */ 
-	if (state->rx_buf == 0) {
-	    state->rx_buf_size  = (state->mru < PPP_MRU ? PPP_MRU : state->mru);
-	    state->rx_buf_size += (sizeof(u_int32_t) << 3);
-	    state->rx_buf = allocb(state->rx_buf_size, BPRI_MED);
-
-	    /*
-	     * If allocation fails, try again on the next frame
-	     */
-	    if (state->rx_buf == 0) {
-		state->flags |= IFLUSH;
-		continue;
-	    }
-	    state->flags &= ~(IFLUSH | ESCAPED);
-	    state->infcs  = PPP_INITFCS;
-	}
-
-	if (*dp == PPP_ESCAPE) {
-	    state->flags |= ESCAPED;
-	    continue;
-	}
-
-	/*
-	 * Make sure we un-escape the necessary characters, as well as the
-	 * ones in our receive async control character map
-	 */
-	if (state->flags & ESCAPED) {
-	    *dp ^= PPP_TRANS;
-	    state->flags &= ~ESCAPED;
-	} else if (IN_RX_MAP(*dp, state->raccm)) 
-	    continue;
-
-	/*
-	 * Unless the peer lied to us about the negotiated MRU, we should
-	 * never get a frame which is too long. If it happens, toss it away
-	 * and grab the next incoming one
-	 */
-	if (msgdsize(state->rx_buf) < state->rx_buf_size) {
-	    state->infcs = PPP_FCS(state->infcs, *dp);
-	    *state->rx_buf->b_wptr++ = *dp;
-	} else {
-	    DPRINT2("ppp%d: frame too long (%d)\n",
-		state->unit, msgdsize(state->rx_buf));
-	    freemsg(state->rx_buf);
-	    state->rx_buf     = 0;
-	    state->flags     |= IFLUSH;
-	}
-    }
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-}
-
-static int
-msg_byte(mp, i)
-    mblk_t *mp;
-    unsigned int i;
-{
-    while (mp != 0 && i >= mp->b_wptr - mp->b_rptr)
-	mp = mp->b_cont;
-    if (mp == 0)
-	return -1;
-    return mp->b_rptr[i];
-}
diff --git a/mdk-stage1/ppp/modules/ppp_comp.c b/mdk-stage1/ppp/modules/ppp_comp.c
deleted file mode 100644
index f6eef5ab1..000000000
--- a/mdk-stage1/ppp/modules/ppp_comp.c
+++ /dev/null
@@ -1,1126 +0,0 @@
-/*
- * ppp_comp.c - STREAMS module for kernel-level compression and CCP support.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under SVR4, Solaris 2, SunOS 4, and Digital UNIX.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/errno.h>
-#include <sys/stream.h>
-
-#ifdef SVR4
-#include <sys/conf.h>
-#include <sys/cmn_err.h>
-#include <sys/ddi.h>
-#else
-#include <sys/user.h>
-#ifdef __osf__
-#include <sys/cmn_err.h>
-#endif
-#endif /* SVR4 */
-
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-#ifdef __osf__
-#include <sys/mbuf.h>
-#include <sys/protosw.h>
-#endif
-
-#include <netinet/in.h>
-#include <netinet/in_systm.h>
-#include <netinet/ip.h>
-#include <net/vjcompress.h>
-
-#define PACKETPTR	mblk_t *
-#include <net/ppp-comp.h>
-
-MOD_OPEN_DECL(ppp_comp_open);
-MOD_CLOSE_DECL(ppp_comp_close);
-static int ppp_comp_rput __P((queue_t *, mblk_t *));
-static int ppp_comp_rsrv __P((queue_t *));
-static int ppp_comp_wput __P((queue_t *, mblk_t *));
-static int ppp_comp_wsrv __P((queue_t *));
-static void ppp_comp_ccp __P((queue_t *, mblk_t *, int));
-static int msg_byte __P((mblk_t *, unsigned int));
-
-/* Extract byte i of message mp. */
-#define MSG_BYTE(mp, i)	((i) < (mp)->b_wptr - (mp)->b_rptr? (mp)->b_rptr[i]: \
-			 msg_byte((mp), (i)))
-
-/* Is this LCP packet one we have to transmit using LCP defaults? */
-#define LCP_USE_DFLT(mp)	(1 <= (code = MSG_BYTE((mp), 4)) && code <= 7)
-
-#define PPP_COMP_ID 0xbadf
-static struct module_info minfo = {
-#ifdef PRIOQ
-    PPP_COMP_ID, "ppp_comp", 0, INFPSZ, 16512, 16384,
-#else
-    PPP_COMP_ID, "ppp_comp", 0, INFPSZ, 16384, 4096,
-#endif
-};
-
-static struct qinit r_init = {
-    ppp_comp_rput, ppp_comp_rsrv, ppp_comp_open, ppp_comp_close,
-    NULL, &minfo, NULL
-};
-
-static struct qinit w_init = {
-    ppp_comp_wput, ppp_comp_wsrv, NULL, NULL, NULL, &minfo, NULL
-};
-
-#if defined(SVR4) && !defined(SOL2)
-int pcmpdevflag = 0;
-#define ppp_compinfo pcmpinfo
-#endif
-struct streamtab ppp_compinfo = {
-    &r_init, &w_init, NULL, NULL
-};
-
-int ppp_comp_count;		/* number of module instances in use */
-
-#ifdef __osf__
-
-static void ppp_comp_alloc __P((comp_state_t *));
-typedef struct memreq {
-    unsigned char comp_opts[20];
-    int cmd;
-    int thread_status;
-    char *returned_mem;
-} memreq_t;
-
-#endif
-
-typedef struct comp_state {
-    int		flags;
-    int		mru;
-    int		mtu;
-    int		unit;
-    struct compressor *xcomp;
-    void	*xstate;
-    struct compressor *rcomp;
-    void	*rstate;
-    struct vjcompress vj_comp;
-    int		vj_last_ierrors;
-    struct pppstat stats;
-#ifdef __osf__
-    memreq_t	memreq;
-    thread_t	thread;
-#endif
-} comp_state_t;
-
-
-#ifdef __osf__
-extern task_t first_task;
-#endif
-
-/* Bits in flags are as defined in pppio.h. */
-#define CCP_ERR		(CCP_ERROR | CCP_FATALERROR)
-#define LAST_MOD	0x1000000	/* no ppp modules below us */
-#define DBGLOG		0x2000000	/* log debugging stuff */
-
-#define MAX_IPHDR	128	/* max TCP/IP header size */
-#define MAX_VJHDR	20	/* max VJ compressed header size (?) */
-
-#undef MIN		/* just in case */
-#define MIN(a, b)	((a) < (b)? (a): (b))
-
-/*
- * List of compressors we know about.
- */
-
-#if DO_BSD_COMPRESS
-extern struct compressor ppp_bsd_compress;
-#endif
-#if DO_DEFLATE
-extern struct compressor ppp_deflate, ppp_deflate_draft;
-#endif
-
-struct compressor *ppp_compressors[] = {
-#if DO_BSD_COMPRESS
-    &ppp_bsd_compress,
-#endif
-#if DO_DEFLATE
-    &ppp_deflate,
-    &ppp_deflate_draft,
-#endif
-    NULL
-};
-
-/*
- * STREAMS module entry points.
- */
-MOD_OPEN(ppp_comp_open)
-{
-    comp_state_t *cp;
-#ifdef __osf__
-    thread_t thread;
-#endif
-
-    if (q->q_ptr == NULL) {
-	cp = (comp_state_t *) ALLOC_SLEEP(sizeof(comp_state_t));
-	if (cp == NULL)
-	    OPEN_ERROR(ENOSR);
-	bzero((caddr_t)cp, sizeof(comp_state_t));
-	WR(q)->q_ptr = q->q_ptr = (caddr_t) cp;
-	cp->mru = PPP_MRU;
-	cp->mtu = PPP_MTU;
-	cp->xstate = NULL;
-	cp->rstate = NULL;
-	vj_compress_init(&cp->vj_comp, -1);
-#ifdef __osf__
-	if (!(thread = kernel_thread_w_arg(first_task, ppp_comp_alloc, (void *)cp)))
-		OPEN_ERROR(ENOSR);
-	cp->thread = thread;
-#endif
-	++ppp_comp_count;
-	qprocson(q);
-    }
-    return 0;
-}
-
-MOD_CLOSE(ppp_comp_close)
-{
-    comp_state_t *cp;
-
-    qprocsoff(q);
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp != NULL) {
-	if (cp->xstate != NULL)
-	    (*cp->xcomp->comp_free)(cp->xstate);
-	if (cp->rstate != NULL)
-	    (*cp->rcomp->decomp_free)(cp->rstate);
-#ifdef __osf__
-	if (!cp->thread)
-	    printf("ppp_comp_close: NULL thread!\n");
-	else
-	    thread_terminate(cp->thread);
-#endif
-	FREE(cp, sizeof(comp_state_t));
-	q->q_ptr = NULL;
-	OTHERQ(q)->q_ptr = NULL;
-	--ppp_comp_count;
-    }
-    return 0;
-}
-
-#ifdef __osf__
-
-/* thread for calling back to a compressor's memory allocator
- * Needed for Digital UNIX since it's VM can't handle requests
- * for large amounts of memory without blocking.  The thread
- * provides a context in which we can call a memory allocator
- * that may block.
- */
-static void
-ppp_comp_alloc(comp_state_t *cp)
-{
-    int len, cmd;
-    unsigned char *compressor_options;
-    thread_t thread;
-    void *(*comp_allocator)();
-
-
-#if defined(MAJOR_VERSION) && (MAJOR_VERSION <= 2)
-
-    /* In 2.x and earlier the argument gets passed
-     * in the thread structure itself.  Yuck.
-     */
-    thread = current_thread();
-    cp = thread->reply_port;
-    thread->reply_port = PORT_NULL;
-
-#endif
-
-    for (;;) {
-	assert_wait((vm_offset_t)&cp->memreq.thread_status, TRUE);
-	thread_block();
-
-	if (thread_should_halt(current_thread()))
-	    thread_halt_self();
-	cmd = cp->memreq.cmd;
-	compressor_options = &cp->memreq.comp_opts[0];
-	len = compressor_options[1];
-	if (cmd == PPPIO_XCOMP) {
-	    cp->memreq.returned_mem = cp->xcomp->comp_alloc(compressor_options, len);
-	    if (!cp->memreq.returned_mem) {
-		cp->memreq.thread_status = ENOSR;
-	    } else {
-		cp->memreq.thread_status = 0;
-	    }
-	} else {
-	    cp->memreq.returned_mem = cp->rcomp->decomp_alloc(compressor_options, len);
-	    if (!cp->memreq.returned_mem) {
-	        cp->memreq.thread_status = ENOSR;
-	    } else {
-		cp->memreq.thread_status = 0;
-	    }
-	}
-    }
-}
-
-#endif /* __osf__ */
-
-/* here's the deal with memory allocation under Digital UNIX.
- * Some other may also benefit from this...
- * We can't ask for huge chunks of memory in a context where
- * the caller can't be put to sleep (like, here.)  The alloc
- * is likely to fail.  Instead we do this: the first time we
- * get called, kick off a thread to do the allocation.  Return
- * immediately to the caller with EAGAIN, as an indication that
- * they should send down the ioctl again.  By the time the
- * second call comes in it's likely that the memory allocation
- * thread will have returned with the requested memory.  We will
- * continue to return EAGAIN however until the thread has completed.
- * When it has, we return zero (and the memory) if the allocator
- * was successful and ENOSR otherwise.
- *
- * Callers of the RCOMP and XCOMP ioctls are encouraged (but not
- * required) to loop for some number of iterations with a small
- * delay in the loop body (for instance a 1/10-th second "sleep"
- * via select.)
- */
-static int
-ppp_comp_wput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    struct iocblk *iop;
-    comp_state_t *cp;
-    int error, len, n;
-    int flags, mask;
-    mblk_t *np;
-    struct compressor **comp;
-    struct ppp_stats *psp;
-    struct ppp_comp_stats *csp;
-    unsigned char *opt_data;
-    int nxslots, nrslots;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_wput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-
-    case M_DATA:
-	putq(q, mp);
-	break;
-
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	error = EINVAL;
-	switch (iop->ioc_cmd) {
-
-	case PPPIO_CFLAGS:
-	    /* set/get CCP state */
-	    if (iop->ioc_count != 2 * sizeof(int))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_CFLAGS b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    flags = ((int *) mp->b_cont->b_rptr)[0];
-	    mask = ((int *) mp->b_cont->b_rptr)[1];
-	    cp->flags = (cp->flags & ~mask) | (flags & mask);
-	    if ((mask & CCP_ISOPEN) && (flags & CCP_ISOPEN) == 0) {
-		if (cp->xstate != NULL) {
-		    (*cp->xcomp->comp_free)(cp->xstate);
-		    cp->xstate = NULL;
-		}
-		if (cp->rstate != NULL) {
-		    (*cp->rcomp->decomp_free)(cp->rstate);
-		    cp->rstate = NULL;
-		}
-		cp->flags &= ~CCP_ISUP;
-	    }
-	    error = 0;
-	    iop->ioc_count = sizeof(int);
-	    ((int *) mp->b_cont->b_rptr)[0] = cp->flags;
-	    mp->b_cont->b_wptr = mp->b_cont->b_rptr + sizeof(int);
-	    break;
-
-	case PPPIO_VJINIT:
-	    /*
-	     * Initialize VJ compressor/decompressor
-	     */
-	    if (iop->ioc_count != 2)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_VJINIT b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    nxslots = mp->b_cont->b_rptr[0] + 1;
-	    nrslots = mp->b_cont->b_rptr[1] + 1;
-	    if (nxslots > MAX_STATES || nrslots > MAX_STATES)
-		break;
-	    vj_compress_init(&cp->vj_comp, nxslots);
-	    cp->vj_last_ierrors = cp->stats.ppp_ierrors;
-	    error = 0;
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_XCOMP:
-	case PPPIO_RCOMP:
-	    if (iop->ioc_count <= 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_[XR]COMP b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    opt_data = mp->b_cont->b_rptr;
-	    len = mp->b_cont->b_wptr - opt_data;
-	    if (len > iop->ioc_count)
-		len = iop->ioc_count;
-	    if (opt_data[1] < 2 || opt_data[1] > len)
-		break;
-	    for (comp = ppp_compressors; *comp != NULL; ++comp)
-		if ((*comp)->compress_proto == opt_data[0]) {
-		    /* here's the handler! */
-		    error = 0;
-#ifndef __osf__
-		    if (iop->ioc_cmd == PPPIO_XCOMP) {
-			/* A previous call may have fetched memory for a compressor
-			 * that's now being retired or reset.  Free it using it's
-			 * mechanism for freeing stuff.
-			 */
-			if (cp->xstate != NULL) {
-			    (*cp->xcomp->comp_free)(cp->xstate);
-			    cp->xstate = NULL;
-			}
-			cp->xcomp = *comp;
-			cp->xstate = (*comp)->comp_alloc(opt_data, len);
-			if (cp->xstate == NULL)
-			    error = ENOSR;
-		    } else {
-			if (cp->rstate != NULL) {
-			    (*cp->rcomp->decomp_free)(cp->rstate);
-			    cp->rstate = NULL;
-			}
-			cp->rcomp = *comp;
-			cp->rstate = (*comp)->decomp_alloc(opt_data, len);
-			if (cp->rstate == NULL)
-			    error = ENOSR;
-		    }
-#else
-		    if ((error = cp->memreq.thread_status) != EAGAIN)
-		    if (iop->ioc_cmd == PPPIO_XCOMP) {
-			if (cp->xstate) {
-			    (*cp->xcomp->comp_free)(cp->xstate);
-			    cp->xstate = 0;
-			}
-			/* sanity check for compressor options
-			 */
-			if (sizeof (cp->memreq.comp_opts) < len) {
-			    printf("can't handle options for compressor %d (%d)\n", opt_data[0],
-				opt_data[1]);
-			    cp->memreq.thread_status = ENOSR;
-			    cp->memreq.returned_mem = 0;
-			}
-			/* fill in request for the thread and kick it off
-			 */
-			if (cp->memreq.thread_status == 0 && !cp->memreq.returned_mem) {
-			    bcopy(opt_data, cp->memreq.comp_opts, len);
-			    cp->memreq.cmd = PPPIO_XCOMP;
-			    cp->xcomp = *comp;
-			    error = cp->memreq.thread_status = EAGAIN;
-			    thread_wakeup((vm_offset_t)&cp->memreq.thread_status);
-			} else {
-			    cp->xstate = cp->memreq.returned_mem;
-			    cp->memreq.returned_mem = 0;
-			    cp->memreq.thread_status = 0;
-			}
-		    } else {
-			if (cp->rstate) {
-			    (*cp->rcomp->decomp_free)(cp->rstate);
-			    cp->rstate = NULL;
-			}
-			if (sizeof (cp->memreq.comp_opts) < len) {
-			    printf("can't handle options for compressor %d (%d)\n", opt_data[0],
-				opt_data[1]);
-			    cp->memreq.thread_status = ENOSR;
-			    cp->memreq.returned_mem = 0;
-			}
-			if (cp->memreq.thread_status == 0 && !cp->memreq.returned_mem) {
-			    bcopy(opt_data, cp->memreq.comp_opts, len);
-			    cp->memreq.cmd = PPPIO_RCOMP;
-			    cp->rcomp = *comp;
-			    error = cp->memreq.thread_status = EAGAIN;
-			    thread_wakeup((vm_offset_t)&cp->memreq.thread_status);
-			} else {
-			    cp->rstate = cp->memreq.returned_mem;
-			    cp->memreq.returned_mem = 0;
-			    cp->memreq.thread_status = 0;
-			}
-		    }
-#endif
-		    break;
-		}
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_GETSTAT:
-	    if ((cp->flags & LAST_MOD) == 0) {
-		error = -1;	/* let the ppp_ahdl module handle it */
-		break;
-	    }
-	    np = allocb(sizeof(struct ppp_stats), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-	    psp = (struct ppp_stats *) np->b_wptr;
-	    np->b_wptr += sizeof(struct ppp_stats);
-	    iop->ioc_count = sizeof(struct ppp_stats);
-	    psp->p = cp->stats;
-	    psp->vj = cp->vj_comp.stats;
-	    error = 0;
-	    break;
-
-	case PPPIO_GETCSTAT:
-	    np = allocb(sizeof(struct ppp_comp_stats), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-	    csp = (struct ppp_comp_stats *) np->b_wptr;
-	    np->b_wptr += sizeof(struct ppp_comp_stats);
-	    iop->ioc_count = sizeof(struct ppp_comp_stats);
-	    bzero((caddr_t)csp, sizeof(struct ppp_comp_stats));
-	    if (cp->xstate != 0)
-		(*cp->xcomp->comp_stat)(cp->xstate, &csp->c);
-	    if (cp->rstate != 0)
-		(*cp->rcomp->decomp_stat)(cp->rstate, &csp->d);
-	    error = 0;
-	    break;
-
-	case PPPIO_DEBUG:
-	    if (iop->ioc_count != sizeof(int))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_DEBUG b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n == PPPDBG_LOG + PPPDBG_COMP) {
-		DPRINT1("ppp_comp%d: debug log enabled\n", cp->unit);
-		cp->flags |= DBGLOG;
-		error = 0;
-		iop->ioc_count = 0;
-	    } else {
-		error = -1;
-	    }
-	    break;
-
-	case PPPIO_LASTMOD:
-	    cp->flags |= LAST_MOD;
-	    error = 0;
-	    break;
-
-	default:
-	    error = -1;
-	    break;
-	}
-
-	if (error < 0)
-	    putnext(q, mp);
-	else if (error == 0) {
-	    mp->b_datap->db_type = M_IOCACK;
-	    qreply(q, mp);
-	} else {
-	    mp->b_datap->db_type = M_IOCNAK;
-	    iop->ioc_error = error;
-	    iop->ioc_count = 0;
-	    qreply(q, mp);
-	}
-	break;
-
-    case M_CTL:
-	switch (*mp->b_rptr) {
-	case PPPCTL_MTU:
-	    cp->mtu = ((unsigned short *)mp->b_rptr)[1];
-	    break;
-	case PPPCTL_MRU:
-	    cp->mru = ((unsigned short *)mp->b_rptr)[1];
-	    break;
-	case PPPCTL_UNIT:
-	    cp->unit = mp->b_rptr[1];
-	    break;
-	}
-	putnext(q, mp);
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-static int
-ppp_comp_wsrv(q)
-    queue_t *q;
-{
-    mblk_t *mp, *cmp = NULL;
-    comp_state_t *cp;
-    int len, proto, type, hlen, code;
-    struct ip *ip;
-    unsigned char *vjhdr, *dp;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_wsrv\n");
-	return 0;
-    }
-
-    while ((mp = getq(q)) != 0) {
-	/* assert(mp->b_datap->db_type == M_DATA) */
-#ifdef PRIOQ
-        if (!bcanputnext(q,mp->b_band))
-#else
-        if (!canputnext(q))
-#endif PRIOQ
-	{
-	    putbq(q, mp);
-	    break;
-	}
-
-	/*
-	 * First check the packet length and work out what the protocol is.
-	 */
-	len = msgdsize(mp);
-	if (len < PPP_HDRLEN) {
-	    DPRINT1("ppp_comp_wsrv: bogus short packet (%d)\n", len);
-	    freemsg(mp);
-	    cp->stats.ppp_oerrors++;
-	    putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
-	    continue;
-	}
-	proto = (MSG_BYTE(mp, 2) << 8) + MSG_BYTE(mp, 3);
-
-	/*
-	 * Make sure we've got enough data in the first mblk
-	 * and that we are its only user.
-	 */
-	if (proto == PPP_CCP)
-	    hlen = len;
-	else if (proto == PPP_IP)
-	    hlen = PPP_HDRLEN + MAX_IPHDR;
-	else
-	    hlen = PPP_HDRLEN;
-	if (hlen > len)
-	    hlen = len;
-	if (mp->b_wptr < mp->b_rptr + hlen || mp->b_datap->db_ref > 1) {
-	    PULLUP(mp, hlen);
-	    if (mp == 0) {
-		DPRINT1("ppp_comp_wsrv: pullup failed (%d)\n", hlen);
-		cp->stats.ppp_oerrors++;
-		putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
-		continue;
-	    }
-	}
-
-	/*
-	 * Do VJ compression if requested.
-	 */
-	if (proto == PPP_IP && (cp->flags & COMP_VJC)) {
-	    ip = (struct ip *) (mp->b_rptr + PPP_HDRLEN);
-	    if (ip->ip_p == IPPROTO_TCP) {
-		type = vj_compress_tcp(ip, len - PPP_HDRLEN, &cp->vj_comp,
-				       (cp->flags & COMP_VJCCID), &vjhdr);
-		switch (type) {
-		case TYPE_UNCOMPRESSED_TCP:
-		    mp->b_rptr[3] = proto = PPP_VJC_UNCOMP;
-		    break;
-		case TYPE_COMPRESSED_TCP:
-		    dp = vjhdr - PPP_HDRLEN;
-		    dp[1] = mp->b_rptr[1]; /* copy control field */
-		    dp[0] = mp->b_rptr[0]; /* copy address field */
-		    dp[2] = 0;		   /* set protocol field */
-		    dp[3] = proto = PPP_VJC_COMP;
-		    mp->b_rptr = dp;
-		    break;
-		}
-	    }
-	}
-
-	/*
-	 * Do packet compression if enabled.
-	 */
-	if (proto == PPP_CCP)
-	    ppp_comp_ccp(q, mp, 0);
-	else if (proto != PPP_LCP && (cp->flags & CCP_COMP_RUN)
-		 && cp->xstate != NULL) {
-	    len = msgdsize(mp);
-	    (*cp->xcomp->compress)(cp->xstate, &cmp, mp, len,
-			(cp->flags & CCP_ISUP? cp->mtu + PPP_HDRLEN: 0));
-	    if (cmp != NULL) {
-#ifdef PRIOQ
-		cmp->b_band=mp->b_band;
-#endif PRIOQ
-		freemsg(mp);
-		mp = cmp;
-	    }
-	}
-
-	/*
-	 * Do address/control and protocol compression if enabled.
-	 */
-	if ((cp->flags & COMP_AC)
-	    && !(proto == PPP_LCP && LCP_USE_DFLT(mp))) {
-	    mp->b_rptr += 2;	/* drop the address & ctrl fields */
-	    if (proto < 0x100 && (cp->flags & COMP_PROT))
-		++mp->b_rptr;	/* drop the high protocol byte */
-	} else if (proto < 0x100 && (cp->flags & COMP_PROT)) {
-	    /* shuffle up the address & ctrl fields */
-	    mp->b_rptr[2] = mp->b_rptr[1];
-	    mp->b_rptr[1] = mp->b_rptr[0];
-	    ++mp->b_rptr;
-	}
-
-	cp->stats.ppp_opackets++;
-	cp->stats.ppp_obytes += msgdsize(mp);
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-static int
-ppp_comp_rput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    comp_state_t *cp;
-    struct iocblk *iop;
-    struct ppp_stats *psp;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_rput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-
-    case M_DATA:
-	putq(q, mp);
-	break;
-
-    case M_IOCACK:
-	iop = (struct iocblk *) mp->b_rptr;
-	switch (iop->ioc_cmd) {
-	case PPPIO_GETSTAT:
-	    /*
-	     * Catch this on the way back from the ppp_ahdl module
-	     * so we can fill in the VJ stats.
-	     */
-	    if (mp->b_cont == 0 || iop->ioc_count != sizeof(struct ppp_stats))
-		break;
-	    psp = (struct ppp_stats *) mp->b_cont->b_rptr;
-	    psp->vj = cp->vj_comp.stats;
-	    break;
-	}
-	putnext(q, mp);
-	break;
-
-    case M_CTL:
-	switch (mp->b_rptr[0]) {
-	case PPPCTL_IERROR:
-	    ++cp->stats.ppp_ierrors;
-	    break;
-	case PPPCTL_OERROR:
-	    ++cp->stats.ppp_oerrors;
-	    break;
-	}
-	putnext(q, mp);
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-static int
-ppp_comp_rsrv(q)
-    queue_t *q;
-{
-    int proto, rv, i;
-    mblk_t *mp, *dmp = NULL, *np;
-    uchar_t *dp, *iphdr;
-    comp_state_t *cp;
-    int len, hlen, vjlen;
-    u_int iphlen;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_rsrv\n");
-	return 0;
-    }
-
-    while ((mp = getq(q)) != 0) {
-	/* assert(mp->b_datap->db_type == M_DATA) */
-	if (!canputnext(q)) {
-	    putbq(q, mp);
-	    break;
-	}
-
-	len = msgdsize(mp);
-	cp->stats.ppp_ibytes += len;
-	cp->stats.ppp_ipackets++;
-
-	/*
-	 * First work out the protocol and where the PPP header ends.
-	 */
-	i = 0;
-	proto = MSG_BYTE(mp, 0);
-	if (proto == PPP_ALLSTATIONS) {
-	    i = 2;
-	    proto = MSG_BYTE(mp, 2);
-	}
-	if ((proto & 1) == 0) {
-	    ++i;
-	    proto = (proto << 8) + MSG_BYTE(mp, i);
-	}
-	hlen = i + 1;
-
-	/*
-	 * Now reconstruct a complete, contiguous PPP header at the
-	 * start of the packet.
-	 */
-	if (hlen < ((cp->flags & DECOMP_AC)? 0: 2)
-	           + ((cp->flags & DECOMP_PROT)? 1: 2)) {
-	    /* count these? */
-	    goto bad;
-	}
-	if (mp->b_rptr + hlen > mp->b_wptr) {
-	    adjmsg(mp, hlen);	/* XXX check this call */
-	    hlen = 0;
-	}
-	if (hlen != PPP_HDRLEN) {
-	    /*
-	     * We need to put some bytes on the front of the packet
-	     * to make a full-length PPP header.
-	     * If we can put them in *mp, we do, otherwise we
-	     * tack another mblk on the front.
-	     * XXX we really shouldn't need to carry around
-	     * the address and control at this stage.
-	     */
-	    dp = mp->b_rptr + hlen - PPP_HDRLEN;
-	    if (dp < mp->b_datap->db_base || mp->b_datap->db_ref > 1) {
-		np = allocb(PPP_HDRLEN, BPRI_MED);
-		if (np == 0)
-		    goto bad;
-		np->b_cont = mp;
-		mp->b_rptr += hlen;
-		mp = np;
-		dp = mp->b_wptr;
-		mp->b_wptr += PPP_HDRLEN;
-	    } else
-		mp->b_rptr = dp;
-
-	    dp[0] = PPP_ALLSTATIONS;
-	    dp[1] = PPP_UI;
-	    dp[2] = proto >> 8;
-	    dp[3] = proto;
-	}
-
-	/*
-	 * Now see if we have a compressed packet to decompress,
-	 * or a CCP packet to take notice of.
-	 */
-	proto = PPP_PROTOCOL(mp->b_rptr);
-	if (proto == PPP_CCP) {
-	    len = msgdsize(mp);
-	    if (mp->b_wptr < mp->b_rptr + len) {
-		PULLUP(mp, len);
-		if (mp == 0)
-		    goto bad;
-	    }
-	    ppp_comp_ccp(q, mp, 1);
-	} else if (proto == PPP_COMP) {
-	    if ((cp->flags & CCP_ISUP)
-		&& (cp->flags & CCP_DECOMP_RUN) && cp->rstate
-		&& (cp->flags & CCP_ERR) == 0) {
-		rv = (*cp->rcomp->decompress)(cp->rstate, mp, &dmp);
-		switch (rv) {
-		case DECOMP_OK:
-		    freemsg(mp);
-		    mp = dmp;
-		    if (mp == NULL) {
-			/* no error, but no packet returned either. */
-			continue;
-		    }
-		    break;
-		case DECOMP_ERROR:
-		    cp->flags |= CCP_ERROR;
-		    ++cp->stats.ppp_ierrors;
-		    putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-		    break;
-		case DECOMP_FATALERROR:
-		    cp->flags |= CCP_FATALERROR;
-		    ++cp->stats.ppp_ierrors;
-		    putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-		    break;
-		}
-	    }
-	} else if (cp->rstate && (cp->flags & CCP_DECOMP_RUN)) {
-	    (*cp->rcomp->incomp)(cp->rstate, mp);
-	}
-
-	/*
-	 * Now do VJ decompression.
-	 */
-	proto = PPP_PROTOCOL(mp->b_rptr);
-	if (proto == PPP_VJC_COMP || proto == PPP_VJC_UNCOMP) {
-	    len = msgdsize(mp) - PPP_HDRLEN;
-	    if ((cp->flags & DECOMP_VJC) == 0 || len <= 0)
-		goto bad;
-
-	    /*
-	     * Advance past the ppp header.
-	     * Here we assume that the whole PPP header is in the first mblk.
-	     */
-	    np = mp;
-	    dp = np->b_rptr + PPP_HDRLEN;
-	    if (dp >= mp->b_wptr) {
-		np = np->b_cont;
-		dp = np->b_rptr;
-	    }
-
-	    /*
-	     * Make sure we have sufficient contiguous data at this point.
-	     */
-	    hlen = (proto == PPP_VJC_COMP)? MAX_VJHDR: MAX_IPHDR;
-	    if (hlen > len)
-		hlen = len;
-	    if (np->b_wptr < dp + hlen || np->b_datap->db_ref > 1) {
-		PULLUP(mp, hlen + PPP_HDRLEN);
-		if (mp == 0)
-		    goto bad;
-		np = mp;
-		dp = np->b_rptr + PPP_HDRLEN;
-	    }
-
-	    if (proto == PPP_VJC_COMP) {
-		/*
-		 * Decompress VJ-compressed packet.
-		 * First reset compressor if an input error has occurred.
-		 */
-		if (cp->stats.ppp_ierrors != cp->vj_last_ierrors) {
-		    if (cp->flags & DBGLOG)
-			DPRINT1("ppp%d: resetting VJ\n", cp->unit);
-		    vj_uncompress_err(&cp->vj_comp);
-		    cp->vj_last_ierrors = cp->stats.ppp_ierrors;
-		}
-
-		vjlen = vj_uncompress_tcp(dp, np->b_wptr - dp, len,
-					  &cp->vj_comp, &iphdr, &iphlen);
-		if (vjlen < 0) {
-		    if (cp->flags & DBGLOG)
-			DPRINT2("ppp%d: vj_uncomp_tcp failed, pkt len %d\n",
-				cp->unit, len);
-		    ++cp->vj_last_ierrors;  /* so we don't reset next time */
-		    goto bad;
-		}
-
-		/* drop ppp and vj headers off */
-		if (mp != np) {
-		    freeb(mp);
-		    mp = np;
-		}
-		mp->b_rptr = dp + vjlen;
-
-		/* allocate a new mblk for the ppp and ip headers */
-		if ((np = allocb(iphlen + PPP_HDRLEN + 4, BPRI_MED)) == 0)
-		    goto bad;
-		dp = np->b_rptr;	/* prepend mblk with TCP/IP hdr */
-		dp[0] = PPP_ALLSTATIONS; /* reconstruct PPP header */
-		dp[1] = PPP_UI;
-		dp[2] = PPP_IP >> 8;
-		dp[3] = PPP_IP;
-		bcopy((caddr_t)iphdr, (caddr_t)dp + PPP_HDRLEN, iphlen);
-		np->b_wptr = dp + iphlen + PPP_HDRLEN;
-		np->b_cont = mp;
-
-		/* XXX there seems to be a bug which causes panics in strread
-		   if we make an mbuf with only the IP header in it :-( */
-		if (mp->b_wptr - mp->b_rptr > 4) {
-		    bcopy((caddr_t)mp->b_rptr, (caddr_t)np->b_wptr, 4);
-		    mp->b_rptr += 4;
-		    np->b_wptr += 4;
-		} else {
-		    bcopy((caddr_t)mp->b_rptr, (caddr_t)np->b_wptr,
-			  mp->b_wptr - mp->b_rptr);
-		    np->b_wptr += mp->b_wptr - mp->b_rptr;
-		    np->b_cont = mp->b_cont;
-		    freeb(mp);
-		}
-
-		mp = np;
-
-	    } else {
-		/*
-		 * "Decompress" a VJ-uncompressed packet.
-		 */
-		cp->vj_last_ierrors = cp->stats.ppp_ierrors;
-		if (!vj_uncompress_uncomp(dp, hlen, &cp->vj_comp)) {
-		    if (cp->flags & DBGLOG)
-			DPRINT2("ppp%d: vj_uncomp_uncomp failed, pkt len %d\n",
-				cp->unit, len);
-		    ++cp->vj_last_ierrors;  /* don't need to reset next time */
-		    goto bad;
-		}
-		mp->b_rptr[3] = PPP_IP;	/* fix up the PPP protocol field */
-	    }
-	}
-
-	putnext(q, mp);
-	continue;
-
-    bad:
-	if (mp != 0)
-	    freemsg(mp);
-	cp->stats.ppp_ierrors++;
-	putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-    }
-
-    return 0;
-}
-
-/*
- * Handle a CCP packet being sent or received.
- * Here all the data in the packet is in a single mbuf.
- */
-static void
-ppp_comp_ccp(q, mp, rcvd)
-    queue_t *q;
-    mblk_t *mp;
-    int rcvd;
-{
-    int len, clen;
-    comp_state_t *cp;
-    unsigned char *dp;
-
-    len = msgdsize(mp);
-    if (len < PPP_HDRLEN + CCP_HDRLEN)
-	return;
-
-    cp = (comp_state_t *) q->q_ptr;
-    dp = mp->b_rptr + PPP_HDRLEN;
-    len -= PPP_HDRLEN;
-    clen = CCP_LENGTH(dp);
-    if (clen > len)
-	return;
-
-    switch (CCP_CODE(dp)) {
-    case CCP_CONFREQ:
-    case CCP_TERMREQ:
-    case CCP_TERMACK:
-	cp->flags &= ~CCP_ISUP;
-	break;
-
-    case CCP_CONFACK:
-	if ((cp->flags & (CCP_ISOPEN | CCP_ISUP)) == CCP_ISOPEN
-	    && clen >= CCP_HDRLEN + CCP_OPT_MINLEN
-	    && clen >= CCP_HDRLEN + CCP_OPT_LENGTH(dp + CCP_HDRLEN)) {
-	    if (!rcvd) {
-		if (cp->xstate != NULL
-		    && (*cp->xcomp->comp_init)
-		        (cp->xstate, dp + CCP_HDRLEN, clen - CCP_HDRLEN,
-			 cp->unit, 0, ((cp->flags & DBGLOG) != 0)))
-		    cp->flags |= CCP_COMP_RUN;
-	    } else {
-		if (cp->rstate != NULL
-		    && (*cp->rcomp->decomp_init)
-		        (cp->rstate, dp + CCP_HDRLEN, clen - CCP_HDRLEN,
-			 cp->unit, 0, cp->mru, ((cp->flags & DBGLOG) != 0)))
-		    cp->flags = (cp->flags & ~CCP_ERR) | CCP_DECOMP_RUN;
-	    }
-	}
-	break;
-
-    case CCP_RESETACK:
-	if (cp->flags & CCP_ISUP) {
-	    if (!rcvd) {
-		if (cp->xstate && (cp->flags & CCP_COMP_RUN))
-		    (*cp->xcomp->comp_reset)(cp->xstate);
-	    } else {
-		if (cp->rstate && (cp->flags & CCP_DECOMP_RUN)) {
-		    (*cp->rcomp->decomp_reset)(cp->rstate);
-		    cp->flags &= ~CCP_ERROR;
-		}
-	    }
-	}
-	break;
-    }
-}
-
-#if 0
-dump_msg(mp)
-    mblk_t *mp;
-{
-    dblk_t *db;
-
-    while (mp != 0) {
-	db = mp->b_datap;
-	DPRINT2("mp=%x cont=%x ", mp, mp->b_cont);
-	DPRINT3("rptr=%x wptr=%x datap=%x\n", mp->b_rptr, mp->b_wptr, db);
-	DPRINT2("  base=%x lim=%x", db->db_base, db->db_lim);
-	DPRINT2(" ref=%d type=%d\n", db->db_ref, db->db_type);
-	mp = mp->b_cont;
-    }
-}
-#endif
-
-static int
-msg_byte(mp, i)
-    mblk_t *mp;
-    unsigned int i;
-{
-    while (mp != 0 && i >= mp->b_wptr - mp->b_rptr)
-	mp = mp->b_cont;
-    if (mp == 0)
-	return -1;
-    return mp->b_rptr[i];
-}
diff --git a/mdk-stage1/ppp/modules/ppp_mod.h b/mdk-stage1/ppp/modules/ppp_mod.h
deleted file mode 100644
index f0af00886..000000000
--- a/mdk-stage1/ppp/modules/ppp_mod.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Miscellaneous definitions for PPP STREAMS modules.
- */
-
-/*
- * Macros for allocating and freeing kernel memory.
- */
-#ifdef SVR4			/* SVR4, including Solaris 2 */
-#include <sys/kmem.h>
-#define ALLOC_SLEEP(n)		kmem_alloc((n), KM_SLEEP)
-#define ALLOC_NOSLEEP(n)	kmem_alloc((n), KM_NOSLEEP)
-#define FREE(p, n)		kmem_free((p), (n))
-#endif
-
-#ifdef SUNOS4
-#include <sys/kmem_alloc.h>	/* SunOS 4.x */
-#define ALLOC_SLEEP(n)		kmem_alloc((n), KMEM_SLEEP)
-#define ALLOC_NOSLEEP(n)	kmem_alloc((n), KMEM_NOSLEEP)
-#define FREE(p, n)		kmem_free((p), (n))
-#define NOTSUSER()		(suser()? 0: EPERM)
-#define bcanputnext(q, band)	canputnext((q))
-#endif /* SunOS 4 */
-
-#ifdef __osf__
-#include <sys/malloc.h>
-
-/* caution: this mirrors macros in sys/malloc.h, and uses interfaces
- * which are subject to change.
- * The problems are that:
- *     - the official MALLOC macro wants the lhs of the assignment as an argument,
- *	 and it takes care of the assignment itself (yuck.)
- *     - PPP insists on using "FREE" which conflicts with a macro of the same name.
- *
- */
-#ifdef BUCKETINDX /* V2.0 */
-#define ALLOC_SLEEP(n)		(void *)malloc((u_long)(n), BUCKETP(n), M_DEVBUF, M_WAITOK)
-#define ALLOC_NOSLEEP(n)	(void *)malloc((u_long)(n), BUCKETP(n), M_DEVBUF, M_NOWAIT)
-#else
-#define ALLOC_SLEEP(n)		(void *)malloc((u_long)(n), BUCKETINDEX(n), M_DEVBUF, M_WAITOK)
-#define ALLOC_NOSLEEP(n)	(void *)malloc((u_long)(n), BUCKETINDEX(n), M_DEVBUF, M_NOWAIT)
-#endif
-
-#define bcanputnext(q, band)	canputnext((q))
-
-#ifdef FREE
-#undef FREE
-#endif
-#define FREE(p, n)		free((void *)(p), M_DEVBUF)
-
-#define NO_DLPI 1
-
-#ifndef IFT_PPP
-#define IFT_PPP 0x17
-#endif
-
-#include <sys/proc.h>
-#define NOTSUSER()		(suser(u.u_procp->p_rcred, &u.u_acflag) ? EPERM : 0)
-
-/* #include "ppp_osf.h" */
-
-#endif /* __osf__ */
-
-#ifdef AIX4
-#define ALLOC_SLEEP(n)		xmalloc((n), 0, pinned_heap)	/* AIX V4.x */
-#define ALLOC_NOSLEEP(n)	xmalloc((n), 0, pinned_heap)	/* AIX V4.x */
-#define FREE(p, n)		xmfree((p), pinned_heap)
-#define NOTSUSER()		(suser()? 0: EPERM)
-#endif /* AIX */
-
-/*
- * Macros for printing debugging stuff.
- */
-#ifdef DEBUG
-#if defined(SVR4) || defined(__osf__)
-#if defined(SNI)
-#include <sys/strlog.h>
-#define STRLOG_ID		4712
-#define DPRINT(f)		strlog(STRLOG_ID, 0, 0, SL_TRACE, f)
-#define DPRINT1(f, a1)		strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1)
-#define DPRINT2(f, a1, a2)	strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1, a2)
-#define DPRINT3(f, a1, a2, a3)	strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1, a2, a3)
-#else
-#define DPRINT(f)		cmn_err(CE_CONT, f)
-#define DPRINT1(f, a1)		cmn_err(CE_CONT, f, a1)
-#define DPRINT2(f, a1, a2)	cmn_err(CE_CONT, f, a1, a2)
-#define DPRINT3(f, a1, a2, a3)	cmn_err(CE_CONT, f, a1, a2, a3)
-#endif /* SNI */
-#else
-#define DPRINT(f)		printf(f)
-#define DPRINT1(f, a1)		printf(f, a1)
-#define DPRINT2(f, a1, a2)	printf(f, a1, a2)
-#define DPRINT3(f, a1, a2, a3)	printf(f, a1, a2, a3)
-#endif /* SVR4 or OSF */
-
-#else
-#define DPRINT(f)		0
-#define DPRINT1(f, a1)		0
-#define DPRINT2(f, a1, a2)	0
-#define DPRINT3(f, a1, a2, a3)	0
-#endif /* DEBUG */
-
-#ifndef SVR4
-typedef unsigned char uchar_t;
-typedef unsigned short ushort_t;
-#ifndef __osf__
-typedef int minor_t;
-#endif
-#endif
-
-/*
- * If we don't have multithreading support, define substitutes.
- */
-#ifndef D_MP
-# define qprocson(q)
-# define qprocsoff(q)
-# define put(q, mp)	((*(q)->q_qinfo->qi_putp)((q), (mp)))
-# define canputnext(q)	canput((q)->q_next)
-# define qwriter(q, mp, func, scope)	(func)((q), (mp))
-#endif
-
-#ifdef D_MP
-/* Use msgpullup if we have other multithreading support. */
-#define PULLUP(mp, len)				\
-    do {					\
-	mblk_t *np = msgpullup((mp), (len));	\
-	freemsg((mp));				\
-	mp = np;				\
-    } while (0)
-
-#else
-/* Use pullupmsg if we don't have any multithreading support. */
-#define PULLUP(mp, len)			\
-    do {				\
-	if (!pullupmsg((mp), (len))) {	\
-	    freemsg((mp));		\
-	    mp = 0;			\
-	}				\
-    } while (0)
-#endif
-
-/*
- * How to declare the open and close procedures for a module.
- */
-#ifdef SVR4
-#define MOD_OPEN_DECL(name)	\
-static int name __P((queue_t *, dev_t *, int, int, cred_t *))
-
-#define MOD_CLOSE_DECL(name)	\
-static int name __P((queue_t *, int, cred_t *))
-
-#define MOD_OPEN(name)				\
-static int name(q, devp, flag, sflag, credp)	\
-    queue_t *q;					\
-    dev_t *devp;				\
-    int flag, sflag;				\
-    cred_t *credp;
-
-#define MOD_CLOSE(name)		\
-static int name(q, flag, credp)	\
-    queue_t *q;			\
-    int flag;			\
-    cred_t *credp;
-
-#define OPEN_ERROR(x)		return (x)
-#define DRV_OPEN_OK(dev)	return 0
-
-#define NOTSUSER()		(drv_priv(credp))
-
-#else	/* not SVR4 */
-#define MOD_OPEN_DECL(name)	\
-static int name __P((queue_t *, int, int, int))
-
-#define MOD_CLOSE_DECL(name)	\
-static int name __P((queue_t *, int))
-
-#define MOD_OPEN(name)		\
-static int name(q, dev, flag, sflag)	\
-    queue_t *q;				\
-    int dev;				\
-    int flag, sflag;
-
-#define MOD_CLOSE(name)		\
-static int name(q, flag)	\
-    queue_t *q;			\
-    int flag;
-
-#define OPEN_ERROR(x)		{ u.u_error = (x); return OPENFAIL; }
-#define DRV_OPEN_OK(dev)	return (dev)
-
-#endif	/* SVR4 */
diff --git a/mdk-stage1/ppp/modules/vjcompress.c b/mdk-stage1/ppp/modules/vjcompress.c
deleted file mode 100644
index 809b87231..000000000
--- a/mdk-stage1/ppp/modules/vjcompress.c
+++ /dev/null
@@ -1,587 +0,0 @@
-/*
- * Routines to compress and uncompess tcp packets (for transmission
- * over low speed serial lines.
- *
- * Copyright (c) 1989 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- *	Van Jacobson (van@helios.ee.lbl.gov), Dec 31, 1989:
- *	- Initial distribution.
- *
- * Modified June 1993 by Paul Mackerras, paulus@cs.anu.edu.au,
- * so that the entire packet being decompressed doesn't have
- * to be in contiguous memory (just the compressed header).
- */
-
-/*
- * This version is used under SunOS 4.x, Digital UNIX, AIX 4.x,
- * and SVR4 systems including Solaris 2.
- *
- * $Id$
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-
-#ifdef SVR4
-#ifndef __GNUC__
-#include <sys/byteorder.h>	/* for ntohl, etc. */
-#else
-/* make sure we don't get the gnu "fixed" one! */
-#include "/usr/include/sys/byteorder.h"
-#endif
-#endif
-
-#ifdef __osf__
-#include <net/net_globals.h>
-#endif
-#include <netinet/in.h>
-
-#ifdef AIX4
-#define _NETINET_IN_SYSTM_H_
-typedef u_long  n_long;
-#else
-#include <netinet/in_systm.h>
-#endif
-
-#include <netinet/ip.h>
-#include <netinet/tcp.h>
-
-#include <net/ppp_defs.h>
-#include <net/vjcompress.h>
-
-#ifndef VJ_NO_STATS
-#define INCR(counter) ++comp->stats.counter
-#else
-#define INCR(counter)
-#endif
-
-#define BCMP(p1, p2, n) bcmp((char *)(p1), (char *)(p2), (int)(n))
-#undef  BCOPY
-#define BCOPY(p1, p2, n) bcopy((char *)(p1), (char *)(p2), (int)(n))
-#ifndef KERNEL
-#define ovbcopy bcopy
-#endif
-
-#ifdef __osf__
-#define getip_hl(base)	(((base).ip_vhl)&0xf)
-#define getth_off(base)	((((base).th_xoff)&0xf0)>>4)
-
-#else
-#define getip_hl(base)	((base).ip_hl)
-#define getth_off(base)	((base).th_off)
-#endif
-
-void
-vj_compress_init(comp, max_state)
-    struct vjcompress *comp;
-    int max_state;
-{
-    register u_int i;
-    register struct cstate *tstate = comp->tstate;
-
-    if (max_state == -1)
-	max_state = MAX_STATES - 1;
-    bzero((char *)comp, sizeof(*comp));
-    for (i = max_state; i > 0; --i) {
-	tstate[i].cs_id = i;
-	tstate[i].cs_next = &tstate[i - 1];
-    }
-    tstate[0].cs_next = &tstate[max_state];
-    tstate[0].cs_id = 0;
-    comp->last_cs = &tstate[0];
-    comp->last_recv = 255;
-    comp->last_xmit = 255;
-    comp->flags = VJF_TOSS;
-}
-
-
-/* ENCODE encodes a number that is known to be non-zero.  ENCODEZ
- * checks for zero (since zero has to be encoded in the long, 3 byte
- * form).
- */
-#define ENCODE(n) { \
-	if ((u_short)(n) >= 256) { \
-		*cp++ = 0; \
-		cp[1] = (n); \
-		cp[0] = (n) >> 8; \
-		cp += 2; \
-	} else { \
-		*cp++ = (n); \
-	} \
-}
-#define ENCODEZ(n) { \
-	if ((u_short)(n) >= 256 || (u_short)(n) == 0) { \
-		*cp++ = 0; \
-		cp[1] = (n); \
-		cp[0] = (n) >> 8; \
-		cp += 2; \
-	} else { \
-		*cp++ = (n); \
-	} \
-}
-
-#define DECODEL(f) { \
-	if (*cp == 0) {\
-		u_int32_t tmp = ntohl(f) + ((cp[1] << 8) | cp[2]); \
-		(f) = htonl(tmp); \
-		cp += 3; \
-	} else { \
-		u_int32_t tmp = ntohl(f) + (u_int32_t)*cp++; \
-		(f) = htonl(tmp); \
-	} \
-}
-
-#define DECODES(f) { \
-	if (*cp == 0) {\
-		u_short tmp = ntohs(f) + ((cp[1] << 8) | cp[2]); \
-		(f) = htons(tmp); \
-		cp += 3; \
-	} else { \
-		u_short tmp = ntohs(f) + (u_int32_t)*cp++; \
-		(f) = htons(tmp); \
-	} \
-}
-
-#define DECODEU(f) { \
-	if (*cp == 0) {\
-		(f) = htons((cp[1] << 8) | cp[2]); \
-		cp += 3; \
-	} else { \
-		(f) = htons((u_int32_t)*cp++); \
-	} \
-}
-
-u_int
-vj_compress_tcp(ip, mlen, comp, compress_cid, vjhdrp)
-    register struct ip *ip;
-    u_int mlen;
-    struct vjcompress *comp;
-    int compress_cid;
-    u_char **vjhdrp;
-{
-    register struct cstate *cs = comp->last_cs->cs_next;
-    register u_int hlen = getip_hl(*ip);
-    register struct tcphdr *oth;
-    register struct tcphdr *th;
-    register u_int deltaS, deltaA;
-    register u_int changes = 0;
-    u_char new_seq[16];
-    register u_char *cp = new_seq;
-
-    /*
-     * Bail if this is an IP fragment or if the TCP packet isn't
-     * `compressible' (i.e., ACK isn't set or some other control bit is
-     * set).  (We assume that the caller has already made sure the
-     * packet is IP proto TCP).
-     */
-    if ((ip->ip_off & htons(0x3fff)) || mlen < 40)
-	return (TYPE_IP);
-
-    th = (struct tcphdr *)&((int *)ip)[hlen];
-    if ((th->th_flags & (TH_SYN|TH_FIN|TH_RST|TH_ACK)) != TH_ACK)
-	return (TYPE_IP);
-    /*
-     * Packet is compressible -- we're going to send either a
-     * COMPRESSED_TCP or UNCOMPRESSED_TCP packet.  Either way we need
-     * to locate (or create) the connection state.  Special case the
-     * most recently used connection since it's most likely to be used
-     * again & we don't have to do any reordering if it's used.
-     */
-    INCR(vjs_packets);
-    if (ip->ip_src.s_addr != cs->cs_ip.ip_src.s_addr ||
-	ip->ip_dst.s_addr != cs->cs_ip.ip_dst.s_addr ||
-	*(int *)th != ((int *)&cs->cs_ip)[getip_hl(cs->cs_ip)]) {
-	/*
-	 * Wasn't the first -- search for it.
-	 *
-	 * States are kept in a circularly linked list with
-	 * last_cs pointing to the end of the list.  The
-	 * list is kept in lru order by moving a state to the
-	 * head of the list whenever it is referenced.  Since
-	 * the list is short and, empirically, the connection
-	 * we want is almost always near the front, we locate
-	 * states via linear search.  If we don't find a state
-	 * for the datagram, the oldest state is (re-)used.
-	 */
-	register struct cstate *lcs;
-	register struct cstate *lastcs = comp->last_cs;
-
-	do {
-	    lcs = cs; cs = cs->cs_next;
-	    INCR(vjs_searches);
-	    if (ip->ip_src.s_addr == cs->cs_ip.ip_src.s_addr
-		&& ip->ip_dst.s_addr == cs->cs_ip.ip_dst.s_addr
-		&& *(int *)th == ((int *)&cs->cs_ip)[getip_hl(cs->cs_ip)])
-		goto found;
-	} while (cs != lastcs);
-
-	/*
-	 * Didn't find it -- re-use oldest cstate.  Send an
-	 * uncompressed packet that tells the other side what
-	 * connection number we're using for this conversation.
-	 * Note that since the state list is circular, the oldest
-	 * state points to the newest and we only need to set
-	 * last_cs to update the lru linkage.
-	 */
-	INCR(vjs_misses);
-	comp->last_cs = lcs;
-	hlen += getth_off(*th);
-	hlen <<= 2;
-	if (hlen > mlen)
-	    return (TYPE_IP);
-	goto uncompressed;
-
-    found:
-	/*
-	 * Found it -- move to the front on the connection list.
-	 */
-	if (cs == lastcs)
-	    comp->last_cs = lcs;
-	else {
-	    lcs->cs_next = cs->cs_next;
-	    cs->cs_next = lastcs->cs_next;
-	    lastcs->cs_next = cs;
-	}
-    }
-
-    /*
-     * Make sure that only what we expect to change changed. The first
-     * line of the `if' checks the IP protocol version, header length &
-     * type of service.  The 2nd line checks the "Don't fragment" bit.
-     * The 3rd line checks the time-to-live and protocol (the protocol
-     * check is unnecessary but costless).  The 4th line checks the TCP
-     * header length.  The 5th line checks IP options, if any.  The 6th
-     * line checks TCP options, if any.  If any of these things are
-     * different between the previous & current datagram, we send the
-     * current datagram `uncompressed'.
-     */
-    oth = (struct tcphdr *)&((int *)&cs->cs_ip)[hlen];
-    deltaS = hlen;
-    hlen += getth_off(*th);
-    hlen <<= 2;
-    if (hlen > mlen)
-	return (TYPE_IP);
-
-    if (((u_short *)ip)[0] != ((u_short *)&cs->cs_ip)[0] ||
-	((u_short *)ip)[3] != ((u_short *)&cs->cs_ip)[3] ||
-	((u_short *)ip)[4] != ((u_short *)&cs->cs_ip)[4] ||
-	getth_off(*th) != getth_off(*oth) ||
-	(deltaS > 5 && BCMP(ip + 1, &cs->cs_ip + 1, (deltaS - 5) << 2)) ||
-	(getth_off(*th) > 5 && BCMP(th + 1, oth + 1, (getth_off(*th) - 5) << 2)))
-	goto uncompressed;
-
-    /*
-     * Figure out which of the changing fields changed.  The
-     * receiver expects changes in the order: urgent, window,
-     * ack, seq (the order minimizes the number of temporaries
-     * needed in this section of code).
-     */
-    if (th->th_flags & TH_URG) {
-	deltaS = ntohs(th->th_urp);
-	ENCODEZ(deltaS);
-	changes |= NEW_U;
-    } else if (th->th_urp != oth->th_urp)
-	/* argh! URG not set but urp changed -- a sensible
-	 * implementation should never do this but RFC793
-	 * doesn't prohibit the change so we have to deal
-	 * with it. */
-	goto uncompressed;
-
-    if ((deltaS = (u_short)(ntohs(th->th_win) - ntohs(oth->th_win))) > 0) {
-	ENCODE(deltaS);
-	changes |= NEW_W;
-    }
-
-    if ((deltaA = ntohl(th->th_ack) - ntohl(oth->th_ack)) > 0) {
-	if (deltaA > 0xffff)
-	    goto uncompressed;
-	ENCODE(deltaA);
-	changes |= NEW_A;
-    }
-
-    if ((deltaS = ntohl(th->th_seq) - ntohl(oth->th_seq)) > 0) {
-	if (deltaS > 0xffff)
-	    goto uncompressed;
-	ENCODE(deltaS);
-	changes |= NEW_S;
-    }
-
-    switch(changes) {
-
-    case 0:
-	/*
-	 * Nothing changed. If this packet contains data and the
-	 * last one didn't, this is probably a data packet following
-	 * an ack (normal on an interactive connection) and we send
-	 * it compressed.  Otherwise it's probably a retransmit,
-	 * retransmitted ack or window probe.  Send it uncompressed
-	 * in case the other side missed the compressed version.
-	 */
-	if (ip->ip_len != cs->cs_ip.ip_len &&
-	    ntohs(cs->cs_ip.ip_len) == hlen)
-	    break;
-
-	/* (fall through) */
-
-    case SPECIAL_I:
-    case SPECIAL_D:
-	/*
-	 * actual changes match one of our special case encodings --
-	 * send packet uncompressed.
-	 */
-	goto uncompressed;
-
-    case NEW_S|NEW_A:
-	if (deltaS == deltaA && deltaS == ntohs(cs->cs_ip.ip_len) - hlen) {
-	    /* special case for echoed terminal traffic */
-	    changes = SPECIAL_I;
-	    cp = new_seq;
-	}
-	break;
-
-    case NEW_S:
-	if (deltaS == ntohs(cs->cs_ip.ip_len) - hlen) {
-	    /* special case for data xfer */
-	    changes = SPECIAL_D;
-	    cp = new_seq;
-	}
-	break;
-    }
-
-    deltaS = ntohs(ip->ip_id) - ntohs(cs->cs_ip.ip_id);
-    if (deltaS != 1) {
-	ENCODEZ(deltaS);
-	changes |= NEW_I;
-    }
-    if (th->th_flags & TH_PUSH)
-	changes |= TCP_PUSH_BIT;
-    /*
-     * Grab the cksum before we overwrite it below.  Then update our
-     * state with this packet's header.
-     */
-    deltaA = ntohs(th->th_sum);
-    BCOPY(ip, &cs->cs_ip, hlen);
-
-    /*
-     * We want to use the original packet as our compressed packet.
-     * (cp - new_seq) is the number of bytes we need for compressed
-     * sequence numbers.  In addition we need one byte for the change
-     * mask, one for the connection id and two for the tcp checksum.
-     * So, (cp - new_seq) + 4 bytes of header are needed.  hlen is how
-     * many bytes of the original packet to toss so subtract the two to
-     * get the new packet size.
-     */
-    deltaS = cp - new_seq;
-    cp = (u_char *)ip;
-    if (compress_cid == 0 || comp->last_xmit != cs->cs_id) {
-	comp->last_xmit = cs->cs_id;
-	hlen -= deltaS + 4;
-	*vjhdrp = (cp += hlen);
-	*cp++ = changes | NEW_C;
-	*cp++ = cs->cs_id;
-    } else {
-	hlen -= deltaS + 3;
-	*vjhdrp = (cp += hlen);
-	*cp++ = changes;
-    }
-    *cp++ = deltaA >> 8;
-    *cp++ = deltaA;
-    BCOPY(new_seq, cp, deltaS);
-    INCR(vjs_compressed);
-    return (TYPE_COMPRESSED_TCP);
-
-    /*
-     * Update connection state cs & send uncompressed packet (that is,
-     * a regular ip/tcp packet but with the 'conversation id' we hope
-     * to use on future compressed packets in the protocol field).
-     */
- uncompressed:
-    BCOPY(ip, &cs->cs_ip, hlen);
-    ip->ip_p = cs->cs_id;
-    comp->last_xmit = cs->cs_id;
-    return (TYPE_UNCOMPRESSED_TCP);
-}
-
-/*
- * Called when we may have missed a packet.
- */
-void
-vj_uncompress_err(comp)
-    struct vjcompress *comp;
-{
-    comp->flags |= VJF_TOSS;
-    INCR(vjs_errorin);
-}
-
-/*
- * "Uncompress" a packet of type TYPE_UNCOMPRESSED_TCP.
- */
-int
-vj_uncompress_uncomp(buf, buflen, comp)
-    u_char *buf;
-    int buflen;
-    struct vjcompress *comp;
-{
-    register u_int hlen;
-    register struct cstate *cs;
-    register struct ip *ip;
-
-    ip = (struct ip *) buf;
-    hlen = getip_hl(*ip) << 2;
-    if (ip->ip_p >= MAX_STATES
-	|| hlen + sizeof(struct tcphdr) > buflen
-	|| (hlen += getth_off(*((struct tcphdr *)&((char *)ip)[hlen])) << 2)
-	    > buflen
-	|| hlen > MAX_HDR) {
-	comp->flags |= VJF_TOSS;
-	INCR(vjs_errorin);
-	return (0);
-    }
-    cs = &comp->rstate[comp->last_recv = ip->ip_p];
-    comp->flags &=~ VJF_TOSS;
-    ip->ip_p = IPPROTO_TCP;
-    BCOPY(ip, &cs->cs_ip, hlen);
-    cs->cs_hlen = hlen;
-    INCR(vjs_uncompressedin);
-    return (1);
-}
-
-/*
- * Uncompress a packet of type TYPE_COMPRESSED_TCP.
- * The packet starts at buf and is of total length total_len.
- * The first buflen bytes are at buf; this must include the entire
- * compressed TCP/IP header.  This procedure returns the length
- * of the VJ header, with a pointer to the uncompressed IP header
- * in *hdrp and its length in *hlenp.
- */
-int
-vj_uncompress_tcp(buf, buflen, total_len, comp, hdrp, hlenp)
-    u_char *buf;
-    int buflen, total_len;
-    struct vjcompress *comp;
-    u_char **hdrp;
-    u_int *hlenp;
-{
-    register u_char *cp;
-    register u_int hlen, changes;
-    register struct tcphdr *th;
-    register struct cstate *cs;
-    register u_short *bp;
-    register u_int vjlen;
-    register u_int32_t tmp;
-
-    INCR(vjs_compressedin);
-    cp = buf;
-    changes = *cp++;
-    if (changes & NEW_C) {
-	/* Make sure the state index is in range, then grab the state.
-	 * If we have a good state index, clear the 'discard' flag. */
-	if (*cp >= MAX_STATES)
-	    goto bad;
-
-	comp->flags &=~ VJF_TOSS;
-	comp->last_recv = *cp++;
-    } else {
-	/* this packet has an implicit state index.  If we've
-	 * had a line error since the last time we got an
-	 * explicit state index, we have to toss the packet. */
-	if (comp->flags & VJF_TOSS) {
-	    INCR(vjs_tossed);
-	    return (-1);
-	}
-    }
-    cs = &comp->rstate[comp->last_recv];
-    hlen = getip_hl(cs->cs_ip) << 2;
-    th = (struct tcphdr *)&((u_char *)&cs->cs_ip)[hlen];
-    th->th_sum = htons((*cp << 8) | cp[1]);
-    cp += 2;
-    if (changes & TCP_PUSH_BIT)
-	th->th_flags |= TH_PUSH;
-    else
-	th->th_flags &=~ TH_PUSH;
-
-    switch (changes & SPECIALS_MASK) {
-    case SPECIAL_I:
-	{
-	    register u_int32_t i = ntohs(cs->cs_ip.ip_len) - cs->cs_hlen;
-	    /* some compilers can't nest inline assembler.. */
-	    tmp = ntohl(th->th_ack) + i;
-	    th->th_ack = htonl(tmp);
-	    tmp = ntohl(th->th_seq) + i;
-	    th->th_seq = htonl(tmp);
-	}
-	break;
-
-    case SPECIAL_D:
-	/* some compilers can't nest inline assembler.. */
-	tmp = ntohl(th->th_seq) + ntohs(cs->cs_ip.ip_len) - cs->cs_hlen;
-	th->th_seq = htonl(tmp);
-	break;
-
-    default:
-	if (changes & NEW_U) {
-	    th->th_flags |= TH_URG;
-	    DECODEU(th->th_urp);
-	} else
-	    th->th_flags &=~ TH_URG;
-	if (changes & NEW_W)
-	    DECODES(th->th_win);
-	if (changes & NEW_A)
-	    DECODEL(th->th_ack);
-	if (changes & NEW_S)
-	    DECODEL(th->th_seq);
-	break;
-    }
-    if (changes & NEW_I) {
-	DECODES(cs->cs_ip.ip_id);
-    } else {
-	cs->cs_ip.ip_id = ntohs(cs->cs_ip.ip_id) + 1;
-	cs->cs_ip.ip_id = htons(cs->cs_ip.ip_id);
-    }
-
-    /*
-     * At this point, cp points to the first byte of data in the
-     * packet.  Fill in the IP total length and update the IP
-     * header checksum.
-     */
-    vjlen = cp - buf;
-    buflen -= vjlen;
-    if (buflen < 0)
-	/* we must have dropped some characters (crc should detect
-	 * this but the old slip framing won't) */
-	goto bad;
-
-    total_len += cs->cs_hlen - vjlen;
-    cs->cs_ip.ip_len = htons(total_len);
-
-    /* recompute the ip header checksum */
-    bp = (u_short *) &cs->cs_ip;
-    cs->cs_ip.ip_sum = 0;
-    for (changes = 0; hlen > 0; hlen -= 2)
-	changes += *bp++;
-    changes = (changes & 0xffff) + (changes >> 16);
-    changes = (changes & 0xffff) + (changes >> 16);
-    cs->cs_ip.ip_sum = ~ changes;
-
-    *hdrp = (u_char *) &cs->cs_ip;
-    *hlenp = cs->cs_hlen;
-    return vjlen;
-
- bad:
-    comp->flags |= VJF_TOSS;
-    INCR(vjs_errorin);
-    return (-1);
-}
diff --git a/mdk-stage1/ppp/pppd/.cvsignore b/mdk-stage1/ppp/pppd/.cvsignore
deleted file mode 100644
index 476ef2253..000000000
--- a/mdk-stage1/ppp/pppd/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-pppd
-pppd-DIET
diff --git a/mdk-stage1/ppp/pppd/Makefile b/mdk-stage1/ppp/pppd/Makefile
deleted file mode 100644
index ad2bdae90..000000000
--- a/mdk-stage1/ppp/pppd/Makefile
+++ /dev/null
@@ -1,59 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ../..
-
-include $(top_dir)/Makefile.common
-
-
-TARGETS = pppd
-
-ifeq (DIETLIBC, $(L))
-TARGETS += pppd-DIET
-endif
-
-BINTARGET = ../pppd-bin
-
-
-all: $(TARGETS)
-
-clean:
-	rm -f *.o *.a $(BINTARGET) pppd pppd-DIET
-
-FLAGS = -Wall -Werror -Os -fomit-frame-pointer -DDO_BSD_COMPRESS=0 -D_linux_=1 -DHAVE_MMAP -DNO_DRAND48
-
-INCS = -I../include -I.
-
-
-OBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o auth.o options.o demand.o utils.o sys-linux.o ipxcp.o multilink.o tdb.o tty.o
-OBJS-DIET = $(subst .o,-DIET.o,$(OBJS))
-
-
-pppd: $(OBJS)
-	gcc -static -o $@ $^ -lcrypt
-	$(STRIPCMD) $@
-	cp -f $@ $(BINTARGET)
-
-pppd-DIET: $(OBJS-DIET)
-	gcc $(DIETLIBC_LDFLAGS_STAGE1) -o $@ $^ $(DIETLIBC_LIBC)
-	$(STRIPCMD) $@
-	cp -f $@ $(BINTARGET)
-
-$(OBJS): %.o: %.c
-	gcc $(FLAGS) $(INCS) $(GLIBC_INCLUDES) -c $< -o $@
-
-$(OBJS-DIET): %-DIET.o: %.c
-	gcc $(FLAGS) $(INCS) $(DIETLIBC_INCLUDES) -c $< -o $@
-
diff --git a/mdk-stage1/ppp/pppd/Makefile.linux b/mdk-stage1/ppp/pppd/Makefile.linux
deleted file mode 100644
index 47d6ba01e..000000000
--- a/mdk-stage1/ppp/pppd/Makefile.linux
+++ /dev/null
@@ -1,129 +0,0 @@
-#
-# pppd makefile for Linux
-# $Id$
-#
-
-# Default installation locations
-BINDIR = $(DESTDIR)/usr/sbin
-MANDIR = $(DESTDIR)/usr/man
-
-PPPDSRCS = main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
-	   ipxcp.c auth.c options.c sys-linux.c md4.c chap_ms.c cbcp.c \
-	   demand.c utils.c multilink.c tdb.c tty.c
-HEADERS =  callout.h pathnames.h patchlevel.h chap.h md5.h chap_ms.h md4.h \
-	   ipxcp.h cbcp.h tdb.h
-MANPAGES = pppd.8
-PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
-	   auth.o options.o demand.o utils.o sys-linux.o ipxcp.o multilink.o \
-	   tdb.o tty.o
-
-all: pppd
-
-#
-# include dependancies if present and backup if as a header file
-ifeq (.depend,$(wildcard .depend))
-include .depend
-endif
-
-CC = gcc
-#
-COPTS = -Wall $(RPM_OPT_FLAGS)
-LIBS = -lutil
-
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-LIBS += -lcrypt
-endif
-
-# Uncomment the next 2 lines to include support for Microsoft's
-# MS-CHAP authentication protocol.
-CHAPMS=y
-USE_CRYPT=y
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-HAVE_CRYPT_H=y
-endif
-
-# Uncomment the next line to include support for PPP packet filtering.
-# This requires that the libpcap library and headers be installed
-# and that the kernel driver support PPP packet filtering, which it
-# doesn't yet.
-#FILTER=y
-
-HAS_SHADOW=y
-USE_PAM=y
-#HAVE_INET6=y
-
-PLUGIN=y
-
-INCLUDE_DIRS= -I../include
-
-COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE -DHAVE_MULTILINK -DHAVE_MMAP
-
-CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-
-ifdef CHAPMS
-CFLAGS   += -DCHAPMS=1
-ifndef USE_CRYPT
-LIBS     := -ldes $(LIBS)
-else
-CFLAGS   += -DUSE_CRYPT=1
-ifneq ($(wildcard /usr/include/crypt.h),)
-CFLAGS   += -DHAVE_CRYPT_H=1
-endif
-endif
-PPPDOBJS += md4.o chap_ms.o
-ifdef MSLANMAN
-CFLAGS   += -DMSLANMAN=1
-endif
-endif
-
-ifdef HAS_SHADOW
-CFLAGS   += -DHAS_SHADOW
-#LIBS     := -lshadow $(LIBS)
-endif
-
-# For "Pluggable Authentication Modules", see ftp.redhat.com:/pub/pam/.
-ifdef USE_PAM
-CFLAGS   += -DUSE_PAM
-LIBS     := -lpam -ldl $(LIBS)
-endif
-
-# Lock library binary for Linux is included in 'linux' subdirectory.
-ifdef LOCKLIB
-LIBS     := -llock $(LIBS)
-CFLAGS   += -DLOCKLIB=1
-endif
-
-ifdef PLUGIN
-CFLAGS	+= -DPLUGIN
-LDFLAGS	+= -Wl,-E
-LIBS	+= -ldl
-endif
-
-ifdef FILTER
-LIBS    += -lpcap
-CFLAGS  += -DPPP_FILTER -I/usr/include/pcap
-endif
-
-ifdef HAVE_INET6
-     PPPDSRCS += ipv6cp.c eui64.c
-     HEADERS  += ipv6cp.h eui64.h
-     PPPDOBJS += ipv6cp.o eui64.o
-     CFLAGS   += -DINET6=1
-endif
-
-
-INSTALL= install
-
-install: pppd
-	mkdir -p $(BINDIR) $(MANDIR)
-	$(INSTALL)  -m 555 pppd $(BINDIR)/pppd
-	$(INSTALL) -c -m 444 pppd.8 $(MANDIR)/man8
-
-pppd: $(PPPDOBJS)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o pppd $(PPPDOBJS) $(LIBS)
-
-clean:
-	rm -f $(PPPDOBJS) pppd *~ #* core
-
-depend:
-	$(CPP) -M $(CFLAGS) $(PPPDSRCS) >.depend
diff --git a/mdk-stage1/ppp/pppd/Makefile.linux.make b/mdk-stage1/ppp/pppd/Makefile.linux.make
deleted file mode 100644
index d98a32562..000000000
--- a/mdk-stage1/ppp/pppd/Makefile.linux.make
+++ /dev/null
@@ -1,131 +0,0 @@
-#
-# pppd makefile for Linux
-# $Id$
-#
-
-# Default installation locations
-BINDIR = /usr/sbin
-MANDIR = /usr/man
-
-PPPDSRCS = main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
-	   ipxcp.c auth.c options.c sys-linux.c md4.c chap_ms.c cbcp.c \
-	   demand.c utils.c multilink.c tdb.c tty.c
-HEADERS =  callout.h pathnames.h patchlevel.h chap.h md5.h chap_ms.h md4.h \
-	   ipxcp.h cbcp.h tdb.h
-MANPAGES = pppd.8
-PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
-	   auth.o options.o demand.o utils.o sys-linux.o ipxcp.o multilink.o \
-	   tdb.o tty.o
-
-all: pppd
-
-#
-# include dependancies if present and backup if as a header file
-ifeq (.depend,$(wildcard .depend))
-include .depend
-endif
-
-# CC = gcc
-#
-COPTS = -O2 -pipe -Wall -g
-LIBS =
-
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-LIBS += -lcrypt
-endif
-
-# Uncomment the next 2 lines to include support for Microsoft's
-# MS-CHAP authentication protocol.
-CHAPMS=y
-USE_CRYPT=y
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-HAVE_CRYPT_H=y
-endif
-
-# Uncomment the next line to include support for PPP packet filtering.
-# This requires that the libpcap library and headers be installed
-# and that the kernel driver support PPP packet filtering, which it
-# doesn't yet.
-#FILTER=y
-
-HAS_SHADOW=y
-#USE_PAM=y
-#HAVE_INET6=y
-
-PLUGIN=y
-
-INCLUDE_DIRS= -I../include
-
-COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE -DHAVE_MULTILINK -DHAVE_MMAP
-
-CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-
-ifdef CHAPMS
-CFLAGS   += -DCHAPMS=1
-ifndef USE_CRYPT
-LIBS     := -ldes $(LIBS)
-else
-CFLAGS   += -DUSE_CRYPT=1
-ifneq ($(wildcard /usr/include/crypt.h),)
-CFLAGS   += -DHAVE_CRYPT_H=1
-endif
-endif
-PPPDOBJS += md4.o chap_ms.o
-ifdef MSLANMAN
-CFLAGS   += -DMSLANMAN=1
-endif
-endif
-
-ifdef HAS_SHADOW
-CFLAGS   += -DHAS_SHADOW
-#LIBS     := -lshadow $(LIBS)
-endif
-
-# For "Pluggable Authentication Modules", see ftp.redhat.com:/pub/pam/.
-ifdef USE_PAM
-CFLAGS   += -DUSE_PAM
-LIBS     := -lpam -ldl $(LIBS)
-endif
-
-# Lock library binary for Linux is included in 'linux' subdirectory.
-ifdef LOCKLIB
-LIBS     := -llock $(LIBS)
-CFLAGS   += -DLOCKLIB=1
-endif
-
-ifdef PLUGIN
-CFLAGS	+= -DPLUGIN
-LDFLAGS	+= -Wl,-E
-LIBS	+= -ldl
-endif
-
-ifdef FILTER
-LIBS    += -lpcap
-CFLAGS  += -DPPP_FILTER -I/usr/include/pcap
-endif
-
-ifdef HAVE_INET6
-     PPPDSRCS += ipv6cp.c eui64.c
-     HEADERS  += ipv6cp.h eui64.h
-     PPPDOBJS += ipv6cp.o eui64.o
-     CFLAGS   += -DINET6=1
-endif
-
-
-INSTALL= install -o root
-
-install: pppd
-	mkdir -p $(BINDIR) $(MANDIR)
-	$(INSTALL) -s -c -m 555 pppd $(BINDIR)/pppd
-	if chgrp pppusers $(BINDIR)/pppd 2>/dev/null; then \
-	  chmod o-rx,u+s $(BINDIR)/pppd; fi
-	$(INSTALL) -c -m 444 pppd.8 $(MANDIR)/man8
-
-pppd: $(PPPDOBJS)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o pppd $(PPPDOBJS) $(LIBS)
-
-clean:
-	rm -f $(PPPDOBJS) pppd *~ #* core
-
-depend:
-	$(CPP) -M $(CFLAGS) $(PPPDSRCS) >.depend
diff --git a/mdk-stage1/ppp/pppd/Makefile.linux.makeopt b/mdk-stage1/ppp/pppd/Makefile.linux.makeopt
deleted file mode 100644
index 3094c941c..000000000
--- a/mdk-stage1/ppp/pppd/Makefile.linux.makeopt
+++ /dev/null
@@ -1,129 +0,0 @@
-#
-# pppd makefile for Linux
-# $Id$
-#
-
-# Default installation locations
-BINDIR = $(DESTDIR)/usr/sbin
-MANDIR = $(DESTDIR)/usr/man
-
-PPPDSRCS = main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
-	   ipxcp.c auth.c options.c sys-linux.c md4.c chap_ms.c cbcp.c \
-	   demand.c utils.c multilink.c tdb.c tty.c
-HEADERS =  callout.h pathnames.h patchlevel.h chap.h md5.h chap_ms.h md4.h \
-	   ipxcp.h cbcp.h tdb.h
-MANPAGES = pppd.8
-PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
-	   auth.o options.o demand.o utils.o sys-linux.o ipxcp.o multilink.o \
-	   tdb.o tty.o
-
-all: pppd
-
-#
-# include dependancies if present and backup if as a header file
-ifeq (.depend,$(wildcard .depend))
-include .depend
-endif
-
-CC = gcc
-#
-COPTS = -O2 -pipe -Wall -g
-LIBS = -lutil
-
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-LIBS += -lcrypt
-endif
-
-# Uncomment the next 2 lines to include support for Microsoft's
-# MS-CHAP authentication protocol.
-CHAPMS=y
-USE_CRYPT=y
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-HAVE_CRYPT_H=y
-endif
-
-# Uncomment the next line to include support for PPP packet filtering.
-# This requires that the libpcap library and headers be installed
-# and that the kernel driver support PPP packet filtering, which it
-# doesn't yet.
-#FILTER=y
-
-HAS_SHADOW=y
-USE_PAM=y
-#HAVE_INET6=y
-
-PLUGIN=y
-
-INCLUDE_DIRS= -I../include
-
-COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE -DHAVE_MULTILINK -DHAVE_MMAP
-
-CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-
-ifdef CHAPMS
-CFLAGS   += -DCHAPMS=1
-ifndef USE_CRYPT
-LIBS     := -ldes $(LIBS)
-else
-CFLAGS   += -DUSE_CRYPT=1
-ifneq ($(wildcard /usr/include/crypt.h),)
-CFLAGS   += -DHAVE_CRYPT_H=1
-endif
-endif
-PPPDOBJS += md4.o chap_ms.o
-ifdef MSLANMAN
-CFLAGS   += -DMSLANMAN=1
-endif
-endif
-
-ifdef HAS_SHADOW
-CFLAGS   += -DHAS_SHADOW
-#LIBS     := -lshadow $(LIBS)
-endif
-
-# For "Pluggable Authentication Modules", see ftp.redhat.com:/pub/pam/.
-ifdef USE_PAM
-CFLAGS   += -DUSE_PAM
-LIBS     := -lpam -ldl $(LIBS)
-endif
-
-# Lock library binary for Linux is included in 'linux' subdirectory.
-ifdef LOCKLIB
-LIBS     := -llock $(LIBS)
-CFLAGS   += -DLOCKLIB=1
-endif
-
-ifdef PLUGIN
-CFLAGS	+= -DPLUGIN
-LDFLAGS	+= -Wl,-E
-LIBS	+= -ldl
-endif
-
-ifdef FILTER
-LIBS    += -lpcap
-CFLAGS  += -DPPP_FILTER -I/usr/include/pcap
-endif
-
-ifdef HAVE_INET6
-     PPPDSRCS += ipv6cp.c eui64.c
-     HEADERS  += ipv6cp.h eui64.h
-     PPPDOBJS += ipv6cp.o eui64.o
-     CFLAGS   += -DINET6=1
-endif
-
-
-INSTALL= install
-
-install: pppd
-	mkdir -p $(BINDIR) $(MANDIR)
-	$(INSTALL)  -m 555 pppd $(BINDIR)/pppd
-	$(INSTALL) -c -m 444 pppd.8 $(MANDIR)/man8
-
-pppd: $(PPPDOBJS)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o pppd $(PPPDOBJS) $(LIBS)
-
-clean:
-	rm -f $(PPPDOBJS) pppd *~ #* core
-
-depend:
-	$(CPP) -M $(CFLAGS) $(PPPDSRCS) >.depend
diff --git a/mdk-stage1/ppp/pppd/Makefile.sol2 b/mdk-stage1/ppp/pppd/Makefile.sol2
deleted file mode 100644
index dfdcddd97..000000000
--- a/mdk-stage1/ppp/pppd/Makefile.sol2
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# Makefile for pppd under Solaris 2.
-# $Id$
-#
-
-include ../solaris/Makedefs
-
-COPTS	+= -xO2 -xspace -W0,-Lt
-CFLAGS	=  -I../include -DSVR4 -DSOL2 $(COPTS)
-LIBS	= -lsocket -lnsl
-
-OBJS	=  main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o tty.o \
-	ccp.o auth.o options.o demand.o utils.o	sys-solaris.o tdb.o
-
-#
-# uncomment the following to enable plugins
-#
-CFLAGS	+= -DPLUGIN
-LIBS	+= -ldl
-
-#
-# Solaris 8 and above accomodates /var/run, so uncomment the
-# following to place pppd process IDs on that location
-#
-#CFLAGS += -D_PATH_VARRUN='"/var/run/"'
-
-#
-# uncomment the following to enable IPv6
-#
-# Solaris 8 and on includes support for IPv6
-#
-#CFLAGS	+= -DINET6
-#OBJS	+= ipv6cp.o eui64.o
-
-#
-# Make targets
-#
-all: pppd
-
-pppd:	$(OBJS)
-	$(CC) -o pppd $(OBJS) $(LIBS)
-
-install:
-	$(INSTALL) -f $(BINDIR) -m 4755 -u root pppd
-	$(INSTALL) -f $(MANDIR)/man8 -m 444 pppd.8
-
-clean:
-	rm -f $(OBJS) pppd *~ core y.tab.c y.tab.h
diff --git a/mdk-stage1/ppp/pppd/Makefile.sunos4 b/mdk-stage1/ppp/pppd/Makefile.sunos4
deleted file mode 100644
index 694ac341f..000000000
--- a/mdk-stage1/ppp/pppd/Makefile.sunos4
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for pppd under SunOS 4.
-# $Id$
-#
-
-include ../sunos4/Makedefs
-
-LIBS =
-
-CFLAGS = $(COPTS) -I../include -DSUNOS4 -DGIDSET_TYPE=int \
-	-DLOCK_DIR=\"/usr/spool/locks\"
-
-all: pppd
-
-OBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
-	auth.o options.o demand.o utils.o sys-sunos4.o tty.o
-
-pppd:	$(OBJS)
-	$(CC) -o pppd $(OBJS) $(LIBS)
-
-install:
-	$(INSTALL) -c -m 4555 pppd $(BINDIR)/pppd
-	$(INSTALL) -c -m 444 pppd.8 $(MANDIR)/man8/pppd.8
-
-clean:
-	rm -f $(OBJS) pppd *~ core
diff --git a/mdk-stage1/ppp/pppd/auth.c b/mdk-stage1/ppp/pppd/auth.c
deleted file mode 100644
index 5f95a2982..000000000
--- a/mdk-stage1/ppp/pppd/auth.c
+++ /dev/null
@@ -1,1939 +0,0 @@
-/*
- * auth.c - PPP authentication and phase control.
- *
- * Copyright (c) 1993 The Australian National University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the Australian National University.  The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdio.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <pwd.h>
-#include <grp.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#include <utmp.h>
-#include <fcntl.h>
-#if defined(_PATH_LASTLOG) && defined(_linux_)
-#include <lastlog.h>
-#endif
-
-#include <netdb.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#ifdef USE_PAM
-#include <security/pam_appl.h>
-#endif
-
-#ifdef HAS_SHADOW
-#include <shadow.h>
-#ifndef PW_PPP
-#define PW_PPP PW_LOGIN
-#endif
-#endif
-
-#include "pppd.h"
-#include "fsm.h"
-#include "lcp.h"
-#include "ipcp.h"
-#include "upap.h"
-#include "chap.h"
-#ifdef CBCP_SUPPORT
-#include "cbcp.h"
-#endif
-#include "pathnames.h"
-
-#include <time.h>
-
-static const char rcsid[] = RCSID;
-
-/* Bits in scan_authfile return value */
-#define NONWILD_SERVER	1
-#define NONWILD_CLIENT	2
-
-#define ISWILD(word)	(word[0] == '*' && word[1] == 0)
-
-/* The name by which the peer authenticated itself to us. */
-char peer_authname[MAXNAMELEN];
-
-/* Records which authentication operations haven't completed yet. */
-static int auth_pending[NUM_PPP];
-
-/* Set if we have successfully called plogin() */
-static int logged_in;
-
-/* List of addresses which the peer may use. */
-static struct permitted_ip *addresses[NUM_PPP];
-
-/* Wordlist giving addresses which the peer may use
-   without authenticating itself. */
-static struct wordlist *noauth_addrs;
-
-/* Extra options to apply, from the secrets file entry for the peer. */
-static struct wordlist *extra_options;
-
-/* Number of network protocols which we have opened. */
-static int num_np_open;
-
-/* Number of network protocols which have come up. */
-static int num_np_up;
-
-/* Set if we got the contents of passwd[] from the pap-secrets file. */
-static int passwd_from_file;
-
-/* Set if we require authentication only because we have a default route. */
-static bool default_auth;
-
-/* Hook to enable a plugin to control the idle time limit */
-int (*idle_time_hook) __P((struct ppp_idle *)) = NULL;
-
-/* Hook for a plugin to say whether we can possibly authenticate any peer */
-int (*pap_check_hook) __P((void)) = NULL;
-
-/* Hook for a plugin to check the PAP user and password */
-int (*pap_auth_hook) __P((char *user, char *passwd, char **msgp,
-			  struct wordlist **paddrs,
-			  struct wordlist **popts)) = NULL;
-
-/* Hook for a plugin to know about the PAP user logout */
-void (*pap_logout_hook) __P((void)) = NULL;
-
-/* Hook for a plugin to get the PAP password for authenticating us */
-int (*pap_passwd_hook) __P((char *user, char *passwd)) = NULL;
-
-/*
- * This is used to ensure that we don't start an auth-up/down
- * script while one is already running.
- */
-enum script_state {
-    s_down,
-    s_up
-};
-
-static enum script_state auth_state = s_down;
-static enum script_state auth_script_state = s_down;
-static pid_t auth_script_pid = 0;
-
-static int used_login;		/* peer authenticated against login database */
-
-/*
- * Option variables.
- */
-bool uselogin = 0;		/* Use /etc/passwd for checking PAP */
-bool cryptpap = 0;		/* Passwords in pap-secrets are encrypted */
-bool refuse_pap = 0;		/* Don't wanna auth. ourselves with PAP */
-bool refuse_chap = 0;		/* Don't wanna auth. ourselves with CHAP */
-bool usehostname = 0;		/* Use hostname for our_name */
-bool auth_required = 0;		/* Always require authentication from peer */
-bool allow_any_ip = 0;		/* Allow peer to use any IP address */
-bool explicit_remote = 0;	/* User specified explicit remote name */
-char remote_name[MAXNAMELEN];	/* Peer's name for authentication */
-
-static char *uafname;		/* name of most recent +ua file */
-
-/* Bits in auth_pending[] */
-#define PAP_WITHPEER	1
-#define PAP_PEER	2
-#define CHAP_WITHPEER	4
-#define CHAP_PEER	8
-
-extern char *crypt __P((const char *, const char *));
-
-/* Prototypes for procedures local to this file. */
-
-static void network_phase __P((int));
-static void check_idle __P((void *));
-static void connect_time_expired __P((void *));
-static int  plogin __P((char *, char *, char **));
-static void plogout __P((void));
-static int  null_login __P((int));
-static int  get_pap_passwd __P((char *));
-static int  have_pap_secret __P((int *));
-static int  have_chap_secret __P((char *, char *, int, int *));
-static int  ip_addr_check __P((u_int32_t, struct permitted_ip *));
-static int  scan_authfile __P((FILE *, char *, char *, char *,
-			       struct wordlist **, struct wordlist **,
-			       char *));
-static void free_wordlist __P((struct wordlist *));
-static void auth_script __P((char *));
-static void auth_script_done __P((void *));
-static void set_allowed_addrs __P((int, struct wordlist *, struct wordlist *));
-static int  some_ip_ok __P((struct wordlist *));
-static int  setupapfile __P((char **));
-static int  privgroup __P((char **));
-static int  set_noauth_addr __P((char **));
-static void check_access __P((FILE *, char *));
-static int  wordlist_count __P((struct wordlist *));
-
-/*
- * Authentication-related options.
- */
-option_t auth_options[] = {
-    { "auth", o_bool, &auth_required,
-      "Require authentication from peer", OPT_PRIO | 1 },
-    { "noauth", o_bool, &auth_required,
-      "Don't require peer to authenticate", OPT_PRIOSUB | OPT_PRIV,
-      &allow_any_ip },
-    { "require-pap", o_bool, &lcp_wantoptions[0].neg_upap,
-      "Require PAP authentication from peer",
-      OPT_PRIOSUB | 1, &auth_required },
-    { "+pap", o_bool, &lcp_wantoptions[0].neg_upap,
-      "Require PAP authentication from peer",
-      OPT_ALIAS | OPT_PRIOSUB | 1, &auth_required },
-    { "require-chap", o_bool, &lcp_wantoptions[0].neg_chap,
-      "Require CHAP authentication from peer",
-      OPT_PRIOSUB | 1, &auth_required },
-    { "+chap", o_bool, &lcp_wantoptions[0].neg_chap,
-      "Require CHAP authentication from peer",
-      OPT_ALIAS | OPT_PRIOSUB | 1, &auth_required },
-
-    { "refuse-pap", o_bool, &refuse_pap,
-      "Don't agree to auth to peer with PAP", 1 },
-    { "-pap", o_bool, &refuse_pap,
-      "Don't allow PAP authentication with peer", OPT_ALIAS | 1 },
-
-    { "refuse-chap", o_bool, &refuse_chap,
-      "Don't agree to auth to peer with CHAP", 1 },
-    { "-chap", o_bool, &refuse_chap,
-      "Don't allow CHAP authentication with peer", OPT_ALIAS | 1 },
-
-    { "name", o_string, our_name,
-      "Set local name for authentication",
-      OPT_PRIO | OPT_PRIV | OPT_STATIC, NULL, MAXNAMELEN },
-
-    { "+ua", o_special, (void *)setupapfile,
-      "Get PAP user and password from file",
-      OPT_PRIO | OPT_A2STRVAL, &uafname },
-
-    { "user", o_string, user,
-      "Set name for auth with peer", OPT_PRIO | OPT_STATIC, NULL, MAXNAMELEN },
-
-    { "password", o_string, passwd,
-      "Password for authenticating us to the peer",
-      OPT_PRIO | OPT_STATIC | OPT_HIDE, NULL, MAXSECRETLEN },
-
-    { "usehostname", o_bool, &usehostname,
-      "Must use hostname for authentication", 1 },
-
-    { "remotename", o_string, remote_name,
-      "Set remote name for authentication", OPT_PRIO | OPT_STATIC,
-      &explicit_remote, MAXNAMELEN },
-
-    { "login", o_bool, &uselogin,
-      "Use system password database for PAP", 1 },
-
-    { "papcrypt", o_bool, &cryptpap,
-      "PAP passwords are encrypted", 1 },
-
-    { "privgroup", o_special, (void *)privgroup,
-      "Allow group members to use privileged options", OPT_PRIV | OPT_A2LIST },
-
-    { "allow-ip", o_special, (void *)set_noauth_addr,
-      "Set IP address(es) which can be used without authentication",
-      OPT_PRIV | OPT_A2LIST },
-
-    { NULL }
-};
-
-/*
- * setupapfile - specifies UPAP info for authenticating with peer.
- */
-static int
-setupapfile(argv)
-    char **argv;
-{
-    FILE *ufile;
-    int l;
-    char u[MAXNAMELEN], p[MAXSECRETLEN];
-    char *fname;
-
-    lcp_allowoptions[0].neg_upap = 1;
-
-    /* open user info file */
-    fname = strdup(*argv);
-    if (fname == NULL)
-	novm("+ua file name");
-    seteuid(getuid());
-    ufile = fopen(fname, "r");
-    seteuid(0);
-    if (ufile == NULL) {
-	option_error("unable to open user login data file %s", fname);
-	return 0;
-    }
-    check_access(ufile, fname);
-    uafname = fname;
-
-    /* get username */
-    if (fgets(u, MAXNAMELEN - 1, ufile) == NULL
-	|| fgets(p, MAXSECRETLEN - 1, ufile) == NULL){
-	option_error("unable to read user login data file %s", fname);
-	return 0;
-    }
-    fclose(ufile);
-
-    /* get rid of newlines */
-    l = strlen(u);
-    if (l > 0 && u[l-1] == '\n')
-	u[l-1] = 0;
-    l = strlen(p);
-    if (l > 0 && p[l-1] == '\n')
-	p[l-1] = 0;
-
-    if (override_value("user", option_priority, fname))
-	strlcpy(user, u, sizeof(user));
-    if (override_value("passwd", option_priority, fname))
-	strlcpy(passwd, p, sizeof(passwd));
-
-    return (1);
-}
-
-
-/*
- * privgroup - allow members of the group to have privileged access.
- */
-static int
-privgroup(argv)
-    char **argv;
-{
-    struct group *g;
-    int i;
-
-    g = getgrnam(*argv);
-    if (g == 0) {
-	option_error("group %s is unknown", *argv);
-	return 0;
-    }
-    for (i = 0; i < ngroups; ++i) {
-	if (groups[i] == g->gr_gid) {
-	    privileged = 1;
-	    break;
-	}
-    }
-    return 1;
-}
-
-
-/*
- * set_noauth_addr - set address(es) that can be used without authentication.
- * Equivalent to specifying an entry like `"" * "" addr' in pap-secrets.
- */
-static int
-set_noauth_addr(argv)
-    char **argv;
-{
-    char *addr = *argv;
-    int l = strlen(addr) + 1;
-    struct wordlist *wp;
-
-    wp = (struct wordlist *) malloc(sizeof(struct wordlist) + l);
-    if (wp == NULL)
-	novm("allow-ip argument");
-    wp->word = (char *) (wp + 1);
-    wp->next = noauth_addrs;
-    BCOPY(addr, wp->word, l);
-    noauth_addrs = wp;
-    return 1;
-}
-
-
-/*
- * An Open on LCP has requested a change from Dead to Establish phase.
- * Do what's necessary to bring the physical layer up.
- */
-void
-link_required(unit)
-    int unit;
-{
-}
-
-/*
- * LCP has terminated the link; go to the Dead phase and take the
- * physical layer down.
- */
-void
-link_terminated(unit)
-    int unit;
-{
-    if (phase == PHASE_DEAD)
-	return;
-    if (pap_logout_hook) {
-	pap_logout_hook();
-    } else {
-	if (logged_in)
-	    plogout();
-    }
-    new_phase(PHASE_DEAD);
-    notice("Connection terminated.");
-}
-
-/*
- * LCP has gone down; it will either die or try to re-establish.
- */
-void
-link_down(unit)
-    int unit;
-{
-    int i;
-    struct protent *protp;
-
-    auth_state = s_down;
-    if (auth_script_state == s_up && auth_script_pid == 0) {
-	update_link_stats(unit);
-	auth_script_state = s_down;
-	auth_script(_PATH_AUTHDOWN);
-    }
-    for (i = 0; (protp = protocols[i]) != NULL; ++i) {
-	if (!protp->enabled_flag)
-	    continue;
-        if (protp->protocol != PPP_LCP && protp->lowerdown != NULL)
-	    (*protp->lowerdown)(unit);
-        if (protp->protocol < 0xC000 && protp->close != NULL)
-	    (*protp->close)(unit, "LCP down");
-    }
-    num_np_open = 0;
-    num_np_up = 0;
-    if (phase != PHASE_DEAD)
-	new_phase(PHASE_TERMINATE);
-}
-
-/*
- * The link is established.
- * Proceed to the Dead, Authenticate or Network phase as appropriate.
- */
-void
-link_established(unit)
-    int unit;
-{
-    int auth;
-    lcp_options *wo = &lcp_wantoptions[unit];
-    lcp_options *go = &lcp_gotoptions[unit];
-    lcp_options *ho = &lcp_hisoptions[unit];
-    int i;
-    struct protent *protp;
-
-    /*
-     * Tell higher-level protocols that LCP is up.
-     */
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-        if (protp->protocol != PPP_LCP && protp->enabled_flag
-	    && protp->lowerup != NULL)
-	    (*protp->lowerup)(unit);
-
-    if (auth_required && !(go->neg_chap || go->neg_upap)) {
-	/*
-	 * We wanted the peer to authenticate itself, and it refused:
-	 * if we have some address(es) it can use without auth, fine,
-	 * otherwise treat it as though it authenticated with PAP using
-	 * a username * of "" and a password of "".  If that's not OK,
-	 * boot it out.
-	 */
-	if (noauth_addrs != NULL) {
-	    set_allowed_addrs(unit, NULL, NULL);
-	} else if (!wo->neg_upap || uselogin || !null_login(unit)) {
-	    warn("peer refused to authenticate: terminating link");
-	    lcp_close(unit, "peer refused to authenticate");
-	    status = EXIT_PEER_AUTH_FAILED;
-	    return;
-	}
-    }
-
-    new_phase(PHASE_AUTHENTICATE);
-    used_login = 0;
-    auth = 0;
-    if (go->neg_chap) {
-	ChapAuthPeer(unit, our_name, go->chap_mdtype);
-	auth |= CHAP_PEER;
-    } else if (go->neg_upap) {
-	upap_authpeer(unit);
-	auth |= PAP_PEER;
-    }
-    if (ho->neg_chap) {
-	ChapAuthWithPeer(unit, user, ho->chap_mdtype);
-	auth |= CHAP_WITHPEER;
-    } else if (ho->neg_upap) {
-	if (passwd[0] == 0) {
-	    passwd_from_file = 1;
-	    if (!get_pap_passwd(passwd))
-		error("No secret found for PAP login");
-	}
-	upap_authwithpeer(unit, user, passwd);
-	auth |= PAP_WITHPEER;
-    }
-    auth_pending[unit] = auth;
-
-    if (!auth)
-	network_phase(unit);
-}
-
-/*
- * Proceed to the network phase.
- */
-static void
-network_phase(unit)
-    int unit;
-{
-    lcp_options *go = &lcp_gotoptions[unit];
-
-    /*
-     * If the peer had to authenticate, run the auth-up script now.
-     */
-    if (go->neg_chap || go->neg_upap) {
-	auth_state = s_up;
-	if (auth_script_state == s_down && auth_script_pid == 0) {
-	    auth_script_state = s_up;
-	    auth_script(_PATH_AUTHUP);
-	}
-    }
-
-#ifdef CBCP_SUPPORT
-    /*
-     * If we negotiated callback, do it now.
-     */
-    if (go->neg_cbcp) {
-	new_phase(PHASE_CALLBACK);
-	(*cbcp_protent.open)(unit);
-	return;
-    }
-#endif
-
-    /*
-     * Process extra options from the secrets file
-     */
-    if (extra_options) {
-	options_from_list(extra_options, 1);
-	free_wordlist(extra_options);
-	extra_options = 0;
-    }
-    start_networks();
-}
-
-void
-start_networks()
-{
-    int i;
-    struct protent *protp;
-
-    new_phase(PHASE_NETWORK);
-
-#ifdef HAVE_MULTILINK
-    if (multilink) {
-	if (mp_join_bundle()) {
-	    if (updetach && !nodetach)
-		detach();
-	    return;
-	}
-    }
-#endif /* HAVE_MULTILINK */
-
-#ifdef PPP_FILTER
-    if (!demand)
-	set_filters(&pass_filter, &active_filter);
-#endif
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-        if (protp->protocol < 0xC000 && protp->enabled_flag
-	    && protp->open != NULL) {
-	    (*protp->open)(0);
-	    if (protp->protocol != PPP_CCP)
-		++num_np_open;
-	}
-
-    if (num_np_open == 0)
-	/* nothing to do */
-	lcp_close(0, "No network protocols running");
-}
-
-/*
- * The peer has failed to authenticate himself using `protocol'.
- */
-void
-auth_peer_fail(unit, protocol)
-    int unit, protocol;
-{
-    /*
-     * Authentication failure: take the link down
-     */
-    lcp_close(unit, "Authentication failed");
-    status = EXIT_PEER_AUTH_FAILED;
-}
-
-/*
- * The peer has been successfully authenticated using `protocol'.
- */
-void
-auth_peer_success(unit, protocol, name, namelen)
-    int unit, protocol;
-    char *name;
-    int namelen;
-{
-    int bit;
-
-    switch (protocol) {
-    case PPP_CHAP:
-	bit = CHAP_PEER;
-	break;
-    case PPP_PAP:
-	bit = PAP_PEER;
-	break;
-    default:
-	warn("auth_peer_success: unknown protocol %x", protocol);
-	return;
-    }
-
-    /*
-     * Save the authenticated name of the peer for later.
-     */
-    if (namelen > sizeof(peer_authname) - 1)
-	namelen = sizeof(peer_authname) - 1;
-    BCOPY(name, peer_authname, namelen);
-    peer_authname[namelen] = 0;
-    script_setenv("PEERNAME", peer_authname, 0);
-
-    /*
-     * If there is no more authentication still to be done,
-     * proceed to the network (or callback) phase.
-     */
-    if ((auth_pending[unit] &= ~bit) == 0)
-        network_phase(unit);
-}
-
-/*
- * We have failed to authenticate ourselves to the peer using `protocol'.
- */
-void
-auth_withpeer_fail(unit, protocol)
-    int unit, protocol;
-{
-    if (passwd_from_file)
-	BZERO(passwd, MAXSECRETLEN);
-    /*
-     * We've failed to authenticate ourselves to our peer.
-     * Some servers keep sending CHAP challenges, but there
-     * is no point in persisting without any way to get updated
-     * authentication secrets.
-     */
-    lcp_close(unit, "Failed to authenticate ourselves to peer");
-    status = EXIT_AUTH_TOPEER_FAILED;
-}
-
-/*
- * We have successfully authenticated ourselves with the peer using `protocol'.
- */
-void
-auth_withpeer_success(unit, protocol)
-    int unit, protocol;
-{
-    int bit;
-
-    switch (protocol) {
-    case PPP_CHAP:
-	bit = CHAP_WITHPEER;
-	break;
-    case PPP_PAP:
-	if (passwd_from_file)
-	    BZERO(passwd, MAXSECRETLEN);
-	bit = PAP_WITHPEER;
-	break;
-    default:
-	warn("auth_withpeer_success: unknown protocol %x", protocol);
-	bit = 0;
-    }
-
-    /*
-     * If there is no more authentication still being done,
-     * proceed to the network (or callback) phase.
-     */
-    if ((auth_pending[unit] &= ~bit) == 0)
-	network_phase(unit);
-}
-
-
-/*
- * np_up - a network protocol has come up.
- */
-void
-np_up(unit, proto)
-    int unit, proto;
-{
-    int tlim;
-
-    if (num_np_up == 0) {
-	/*
-	 * At this point we consider that the link has come up successfully.
-	 */
-	status = EXIT_OK;
-	unsuccess = 0;
-	new_phase(PHASE_RUNNING);
-
-	if (idle_time_hook != 0)
-	    tlim = (*idle_time_hook)(NULL);
-	else
-	    tlim = idle_time_limit;
-	if (tlim > 0)
-	    TIMEOUT(check_idle, NULL, tlim);
-
-	/*
-	 * Set a timeout to close the connection once the maximum
-	 * connect time has expired.
-	 */
-	if (maxconnect > 0)
-	    TIMEOUT(connect_time_expired, 0, maxconnect);
-
-	/*
-	 * Detach now, if the updetach option was given.
-	 */
-	if (updetach && !nodetach)
-	    detach();
-    }
-    ++num_np_up;
-}
-
-/*
- * np_down - a network protocol has gone down.
- */
-void
-np_down(unit, proto)
-    int unit, proto;
-{
-    if (--num_np_up == 0) {
-	UNTIMEOUT(check_idle, NULL);
-	new_phase(PHASE_NETWORK);
-    }
-}
-
-/*
- * np_finished - a network protocol has finished using the link.
- */
-void
-np_finished(unit, proto)
-    int unit, proto;
-{
-    if (--num_np_open <= 0) {
-	/* no further use for the link: shut up shop. */
-	lcp_close(0, "No network protocols running");
-    }
-}
-
-/*
- * check_idle - check whether the link has been idle for long
- * enough that we can shut it down.
- */
-static void
-check_idle(arg)
-    void *arg;
-{
-    struct ppp_idle idle;
-    time_t itime;
-    int tlim;
-
-    if (!get_idle_time(0, &idle))
-	return;
-    if (idle_time_hook != 0) {
-	tlim = idle_time_hook(&idle);
-    } else {
-	itime = MIN(idle.xmit_idle, idle.recv_idle);
-	tlim = idle_time_limit - itime;
-    }
-    if (tlim <= 0) {
-	/* link is idle: shut it down. */
-	notice("Terminating connection due to lack of activity.");
-	lcp_close(0, "Link inactive");
-	need_holdoff = 0;
-	status = EXIT_IDLE_TIMEOUT;
-    } else {
-	TIMEOUT(check_idle, NULL, tlim);
-    }
-}
-
-/*
- * connect_time_expired - log a message and close the connection.
- */
-static void
-connect_time_expired(arg)
-    void *arg;
-{
-    info("Connect time expired");
-    lcp_close(0, "Connect time expired");	/* Close connection */
-    status = EXIT_CONNECT_TIME;
-}
-
-/*
- * auth_check_options - called to check authentication options.
- */
-void
-auth_check_options()
-{
-    lcp_options *wo = &lcp_wantoptions[0];
-    int can_auth;
-    int lacks_ip;
-
-    /* Default our_name to hostname, and user to our_name */
-    if (our_name[0] == 0 || usehostname)
-	strlcpy(our_name, hostname, sizeof(our_name));
-    if (user[0] == 0)
-	strlcpy(user, our_name, sizeof(user));
-
-    /*
-     * If we have a default route, require the peer to authenticate
-     * unless the noauth option was given or the real user is root.
-     */
-    if (!auth_required && !allow_any_ip && have_route_to(0) && !privileged) {
-	auth_required = 1;
-	default_auth = 1;
-    }
-
-    /* If authentication is required, ask peer for CHAP or PAP. */
-    if (auth_required) {
-	allow_any_ip = 0;
-	if (!wo->neg_chap && !wo->neg_upap) {
-	    wo->neg_chap = 1;
-	    wo->neg_upap = 1;
-	}
-    } else {
-	wo->neg_chap = 0;
-	wo->neg_upap = 0;
-    }
-
-    /*
-     * Check whether we have appropriate secrets to use
-     * to authenticate the peer.
-     */
-    lacks_ip = 0;
-    can_auth = wo->neg_upap && (uselogin || have_pap_secret(&lacks_ip));
-    if (!can_auth && wo->neg_chap) {
-	can_auth = have_chap_secret((explicit_remote? remote_name: NULL),
-				    our_name, 1, &lacks_ip);
-    }
-
-    if (auth_required && !can_auth && noauth_addrs == NULL) {
-	if (default_auth) {
-	    option_error(
-"By default the remote system is required to authenticate itself");
-	    option_error(
-"(because this system has a default route to the internet)");
-	} else if (explicit_remote)
-	    option_error(
-"The remote system (%s) is required to authenticate itself",
-			 remote_name);
-	else
-	    option_error(
-"The remote system is required to authenticate itself");
-	option_error(
-"but I couldn't find any suitable secret (password) for it to use to do so.");
-	if (lacks_ip)
-	    option_error(
-"(None of the available passwords would let it use an IP address.)");
-
-	exit(1);
-    }
-}
-
-/*
- * auth_reset - called when LCP is starting negotiations to recheck
- * authentication options, i.e. whether we have appropriate secrets
- * to use for authenticating ourselves and/or the peer.
- */
-void
-auth_reset(unit)
-    int unit;
-{
-    lcp_options *go = &lcp_gotoptions[unit];
-    lcp_options *ao = &lcp_allowoptions[0];
-
-    ao->neg_upap = !refuse_pap && (passwd[0] != 0 || get_pap_passwd(NULL));
-    ao->neg_chap = !refuse_chap
-	&& (passwd[0] != 0
-	    || have_chap_secret(user, (explicit_remote? remote_name: NULL),
-				0, NULL));
-
-    if (go->neg_upap && !uselogin && !have_pap_secret(NULL))
-	go->neg_upap = 0;
-    if (go->neg_chap) {
-	if (!have_chap_secret((explicit_remote? remote_name: NULL),
-			      our_name, 1, NULL))
-	    go->neg_chap = 0;
-    }
-}
-
-
-/*
- * check_passwd - Check the user name and passwd against the PAP secrets
- * file.  If requested, also check against the system password database,
- * and login the user if OK.
- *
- * returns:
- *	UPAP_AUTHNAK: Authentication failed.
- *	UPAP_AUTHACK: Authentication succeeded.
- * In either case, msg points to an appropriate message.
- */
-int
-check_passwd(unit, auser, userlen, apasswd, passwdlen, msg)
-    int unit;
-    char *auser;
-    int userlen;
-    char *apasswd;
-    int passwdlen;
-    char **msg;
-{
-    int ret;
-    char *filename;
-    FILE *f;
-    struct wordlist *addrs = NULL, *opts = NULL;
-    char passwd[256], user[256];
-    char secret[MAXWORDLEN];
-    static int attempts = 0;
-
-    /*
-     * Make copies of apasswd and auser, then null-terminate them.
-     * If there are unprintable characters in the password, make
-     * them visible.
-     */
-    slprintf(passwd, sizeof(passwd), "%.*v", passwdlen, apasswd);
-    slprintf(user, sizeof(user), "%.*v", userlen, auser);
-    *msg = "";
-
-    /*
-     * Check if a plugin wants to handle this.
-     */
-    if (pap_auth_hook) {
-	ret = (*pap_auth_hook)(user, passwd, msg, &addrs, &opts);
-	if (ret >= 0) {
-	    if (ret)
-		set_allowed_addrs(unit, addrs, opts);
-	    BZERO(passwd, sizeof(passwd));
-	    if (addrs != 0)
-		free_wordlist(addrs);
-	    return ret? UPAP_AUTHACK: UPAP_AUTHNAK;
-	}
-    }
-
-    /*
-     * Open the file of pap secrets and scan for a suitable secret
-     * for authenticating this user.
-     */
-    filename = _PATH_UPAPFILE;
-    addrs = opts = NULL;
-    ret = UPAP_AUTHNAK;
-    f = fopen(filename, "r");
-    if (f == NULL) {
-	error("Can't open PAP password file %s: %m", filename);
-
-    } else {
-	check_access(f, filename);
-	if (scan_authfile(f, user, our_name, secret, &addrs, &opts, filename) < 0) {
-	    warn("no PAP secret found for %s", user);
-	} else {
-	    /*
-	     * If the secret is "@login", it means to check
-	     * the password against the login database.
-	     */
-	    int login_secret = strcmp(secret, "@login") == 0;
-	    ret = UPAP_AUTHACK;
-	    if (uselogin || login_secret) {
-		/* login option or secret is @login */
-		ret = plogin(user, passwd, msg);
-		if (ret == UPAP_AUTHNAK)
-		    warn("PAP login failure for %s", user);
-		else
-		    used_login = 1;
-	    }
-	    if (secret[0] != 0 && !login_secret) {
-		/* password given in pap-secrets - must match */
-		if ((cryptpap || strcmp(passwd, secret) != 0)
-		    && strcmp(crypt(passwd, secret), secret) != 0) {
-		    ret = UPAP_AUTHNAK;
-		    warn("PAP authentication failure for %s", user);
-		}
-	    }
-	}
-	fclose(f);
-    }
-
-    if (ret == UPAP_AUTHNAK) {
-        if (**msg == 0)
-	    *msg = "Login incorrect";
-	/*
-	 * XXX can we ever get here more than once??
-	 * Frustrate passwd stealer programs.
-	 * Allow 10 tries, but start backing off after 3 (stolen from login).
-	 * On 10'th, drop the connection.
-	 */
-	if (attempts++ >= 10) {
-	    warn("%d LOGIN FAILURES ON %s, %s", attempts, devnam, user);
-	    lcp_close(unit, "login failed");
-	}
-	if (attempts > 3)
-	    sleep((u_int) (attempts - 3) * 5);
-	if (opts != NULL)
-	    free_wordlist(opts);
-
-    } else {
-	attempts = 0;			/* Reset count */
-	if (**msg == 0)
-	    *msg = "Login ok";
-	set_allowed_addrs(unit, addrs, opts);
-    }
-
-    if (addrs != NULL)
-	free_wordlist(addrs);
-    BZERO(passwd, sizeof(passwd));
-    BZERO(secret, sizeof(secret));
-
-    return ret;
-}
-
-/*
- * This function is needed for PAM.
- */
-
-#ifdef USE_PAM
-/* Static variables used to communicate between the conversation function
- * and the server_login function 
- */
-static char *PAM_username;
-static char *PAM_password;
-static int PAM_error = 0;
-static pam_handle_t *pamh = NULL;
-
-/* PAM conversation function
- * Here we assume (for now, at least) that echo on means login name, and
- * echo off means password.
- */
-
-static int PAM_conv (int num_msg, const struct pam_message **msg,
-                    struct pam_response **resp, void *appdata_ptr)
-{
-    int replies = 0;
-    struct pam_response *reply = NULL;
-
-#define COPY_STRING(s) (s) ? strdup(s) : NULL
-
-    reply = malloc(sizeof(struct pam_response) * num_msg);
-    if (!reply) return PAM_CONV_ERR;
-
-    for (replies = 0; replies < num_msg; replies++) {
-        switch (msg[replies]->msg_style) {
-            case PAM_PROMPT_ECHO_ON:
-                reply[replies].resp_retcode = PAM_SUCCESS;
-                reply[replies].resp = COPY_STRING(PAM_username);
-                /* PAM frees resp */
-                break;
-            case PAM_PROMPT_ECHO_OFF:
-                reply[replies].resp_retcode = PAM_SUCCESS;
-                reply[replies].resp = COPY_STRING(PAM_password);
-                /* PAM frees resp */
-                break;
-            case PAM_TEXT_INFO:
-                /* fall through */
-            case PAM_ERROR_MSG:
-                /* ignore it, but pam still wants a NULL response... */
-                reply[replies].resp_retcode = PAM_SUCCESS;
-                reply[replies].resp = NULL;
-                break;
-            default:       
-                /* Must be an error of some sort... */
-                free (reply);
-                PAM_error = 1;
-                return PAM_CONV_ERR;
-        }
-    }
-    *resp = reply;     
-    return PAM_SUCCESS;
-}
-
-static struct pam_conv PAM_conversation = {
-    &PAM_conv,
-    NULL
-};
-#endif  /* USE_PAM */
-
-/*
- * plogin - Check the user name and password against the system
- * password database, and login the user if OK.
- *
- * returns:
- *	UPAP_AUTHNAK: Login failed.
- *	UPAP_AUTHACK: Login succeeded.
- * In either case, msg points to an appropriate message.
- */
-
-static int
-plogin(user, passwd, msg)
-    char *user;
-    char *passwd;
-    char **msg;
-{
-    char *tty;
-
-#ifdef USE_PAM
-    int pam_error;
-
-    pam_error = pam_start ("ppp", user, &PAM_conversation, &pamh);
-    if (pam_error != PAM_SUCCESS) {
-        *msg = (char *) pam_strerror (pamh, pam_error);
-	reopen_log();
-	return UPAP_AUTHNAK;
-    }
-    /*
-     * Define the fields for the credential validation
-     */
-     
-    PAM_username = user;
-    PAM_password = passwd;
-    PAM_error = 0;
-    pam_set_item (pamh, PAM_TTY, devnam); /* this might be useful to some modules */
-
-    /*
-     * Validate the user
-     */
-    pam_error = pam_authenticate (pamh, PAM_SILENT);
-    if (pam_error == PAM_SUCCESS && !PAM_error) {    
-        pam_error = pam_acct_mgmt (pamh, PAM_SILENT);
-        if (pam_error == PAM_SUCCESS)
-	    pam_error = pam_open_session (pamh, PAM_SILENT);
-    }
-
-    *msg = (char *) pam_strerror (pamh, pam_error);
-
-    /*
-     * Clean up the mess
-     */
-    reopen_log();	/* apparently the PAM stuff does closelog() */
-    PAM_username = NULL;
-    PAM_password = NULL;
-    if (pam_error != PAM_SUCCESS)
-        return UPAP_AUTHNAK;
-#else /* #ifdef USE_PAM */
-
-/*
- * Use the non-PAM methods directly
- */
-
-#ifdef HAS_SHADOW
-    struct spwd *spwd;
-    struct spwd *getspnam();
-#endif
-    struct passwd *pw = getpwnam(user);
-
-    endpwent();
-    if (pw == NULL)
-	return (UPAP_AUTHNAK);
-
-#ifdef HAS_SHADOW
-    spwd = getspnam(user);
-    endspent();
-    if (spwd) {
-	/* check the age of the password entry */
-	long now = time(NULL) / 86400L;
-
-	if ((spwd->sp_expire > 0 && now >= spwd->sp_expire)
-	    || ((spwd->sp_max >= 0 && spwd->sp_max < 10000)
-		&& spwd->sp_lstchg >= 0
-		&& now >= spwd->sp_lstchg + spwd->sp_max)) {
-	    warn("Password for %s has expired", user);
-	    return (UPAP_AUTHNAK);
-	}
-	pw->pw_passwd = spwd->sp_pwdp;
-    }
-#endif
-
-    /*
-     * If no passwd, don't let them login.
-     */
-    if (pw->pw_passwd == NULL || strlen(pw->pw_passwd) < 2
-	|| strcmp(crypt(passwd, pw->pw_passwd), pw->pw_passwd) != 0)
-	return (UPAP_AUTHNAK);
-
-#endif /* #ifdef USE_PAM */
-
-    /*
-     * Write a wtmp entry for this user.
-     */
-
-    tty = devnam;
-    if (strncmp(tty, "/dev/", 5) == 0)
-	tty += 5;
-//    logwtmp(tty, user, remote_name);		/* Add wtmp login entry */
-
-#if defined(_PATH_LASTLOG) && !defined(USE_PAM)
-    if (pw != (struct passwd *)NULL) {
-	    struct lastlog ll;
-	    int fd;
-
-	    if ((fd = open(_PATH_LASTLOG, O_RDWR, 0)) >= 0) {
-		(void)lseek(fd, (off_t)(pw->pw_uid * sizeof(ll)), SEEK_SET);
-		memset((void *)&ll, 0, sizeof(ll));
-		(void)time(&ll.ll_time);
-		(void)strncpy(ll.ll_line, tty, sizeof(ll.ll_line));
-		(void)write(fd, (char *)&ll, sizeof(ll));
-		(void)close(fd);
-	    }
-    }
-#endif /* _PATH_LASTLOG and not USE_PAM */
-
-    info("user %s logged in", user);
-    logged_in = 1;
-
-    return (UPAP_AUTHACK);
-}
-
-/*
- * plogout - Logout the user.
- */
-static void
-plogout()
-{
-#ifdef USE_PAM
-    int pam_error;
-
-    if (pamh != NULL) {
-	pam_error = pam_close_session (pamh, PAM_SILENT);
-	pam_end (pamh, pam_error);
-	pamh = NULL;
-    }
-    /* Apparently the pam stuff does closelog(). */
-    reopen_log();
-#else /* ! USE_PAM */   
-    char *tty;
-
-    tty = devnam;
-    if (strncmp(tty, "/dev/", 5) == 0)
-	tty += 5;
-//    logwtmp(tty, "", "");		/* Wipe out utmp logout entry */
-#endif /* ! USE_PAM */
-    logged_in = 0;
-}
-
-
-/*
- * null_login - Check if a username of "" and a password of "" are
- * acceptable, and iff so, set the list of acceptable IP addresses
- * and return 1.
- */
-static int
-null_login(unit)
-    int unit;
-{
-    char *filename;
-    FILE *f;
-    int i, ret;
-    struct wordlist *addrs, *opts;
-    char secret[MAXWORDLEN];
-
-    /*
-     * Open the file of pap secrets and scan for a suitable secret.
-     */
-    filename = _PATH_UPAPFILE;
-    addrs = NULL;
-    f = fopen(filename, "r");
-    if (f == NULL)
-	return 0;
-    check_access(f, filename);
-
-    i = scan_authfile(f, "", our_name, secret, &addrs, &opts, filename);
-    ret = i >= 0 && secret[0] == 0;
-    BZERO(secret, sizeof(secret));
-
-    if (ret)
-	set_allowed_addrs(unit, addrs, opts);
-    else if (opts != 0)
-	free_wordlist(opts);
-    if (addrs != 0)
-	free_wordlist(addrs);
-
-    fclose(f);
-    return ret;
-}
-
-
-/*
- * get_pap_passwd - get a password for authenticating ourselves with
- * our peer using PAP.  Returns 1 on success, 0 if no suitable password
- * could be found.
- * Assumes passwd points to MAXSECRETLEN bytes of space (if non-null).
- */
-static int
-get_pap_passwd(passwd)
-    char *passwd;
-{
-    char *filename;
-    FILE *f;
-    int ret;
-    char secret[MAXWORDLEN];
-
-    /*
-     * Check whether a plugin wants to supply this.
-     */
-    if (pap_passwd_hook) {
-	ret = (*pap_passwd_hook)(user, passwd);
-	if (ret >= 0)
-	    return ret;
-    }
-
-    filename = _PATH_UPAPFILE;
-    f = fopen(filename, "r");
-    if (f == NULL)
-	return 0;
-    check_access(f, filename);
-    ret = scan_authfile(f, user,
-			(remote_name[0]? remote_name: NULL),
-			secret, NULL, NULL, filename);
-    fclose(f);
-    if (ret < 0)
-	return 0;
-    if (passwd != NULL)
-	strlcpy(passwd, secret, MAXSECRETLEN);
-    BZERO(secret, sizeof(secret));
-    return 1;
-}
-
-
-/*
- * have_pap_secret - check whether we have a PAP file with any
- * secrets that we could possibly use for authenticating the peer.
- */
-static int
-have_pap_secret(lacks_ipp)
-    int *lacks_ipp;
-{
-    FILE *f;
-    int ret;
-    char *filename;
-    struct wordlist *addrs;
-
-    /* let the plugin decide, if there is one */
-    if (pap_check_hook) {
-	ret = (*pap_check_hook)();
-	if (ret >= 0)
-	    return ret;
-    }
-
-    filename = _PATH_UPAPFILE;
-    f = fopen(filename, "r");
-    if (f == NULL)
-	return 0;
-
-    ret = scan_authfile(f, (explicit_remote? remote_name: NULL), our_name,
-			NULL, &addrs, NULL, filename);
-    fclose(f);
-    if (ret >= 0 && !some_ip_ok(addrs)) {
-	if (lacks_ipp != 0)
-	    *lacks_ipp = 1;
-	ret = -1;
-    }
-    if (addrs != 0)
-	free_wordlist(addrs);
-
-    return ret >= 0;
-}
-
-
-/*
- * have_chap_secret - check whether we have a CHAP file with a
- * secret that we could possibly use for authenticating `client'
- * on `server'.  Either can be the null string, meaning we don't
- * know the identity yet.
- */
-static int
-have_chap_secret(client, server, need_ip, lacks_ipp)
-    char *client;
-    char *server;
-    int need_ip;
-    int *lacks_ipp;
-{
-    FILE *f;
-    int ret;
-    char *filename;
-    struct wordlist *addrs;
-
-    filename = _PATH_CHAPFILE;
-    f = fopen(filename, "r");
-    if (f == NULL)
-	return 0;
-
-    if (client != NULL && client[0] == 0)
-	client = NULL;
-    else if (server != NULL && server[0] == 0)
-	server = NULL;
-
-    ret = scan_authfile(f, client, server, NULL, &addrs, NULL, filename);
-    fclose(f);
-    if (ret >= 0 && need_ip && !some_ip_ok(addrs)) {
-	if (lacks_ipp != 0)
-	    *lacks_ipp = 1;
-	ret = -1;
-    }
-    if (addrs != 0)
-	free_wordlist(addrs);
-
-    return ret >= 0;
-}
-
-
-/*
- * get_secret - open the CHAP secret file and return the secret
- * for authenticating the given client on the given server.
- * (We could be either client or server).
- */
-int
-get_secret(unit, client, server, secret, secret_len, am_server)
-    int unit;
-    char *client;
-    char *server;
-    char *secret;
-    int *secret_len;
-    int am_server;
-{
-    FILE *f;
-    int ret, len;
-    char *filename;
-    struct wordlist *addrs, *opts;
-    char secbuf[MAXWORDLEN];
-
-    if (!am_server && passwd[0] != 0) {
-	strlcpy(secbuf, passwd, sizeof(secbuf));
-    } else {
-	filename = _PATH_CHAPFILE;
-	addrs = NULL;
-	secbuf[0] = 0;
-
-	f = fopen(filename, "r");
-	if (f == NULL) {
-	    error("Can't open chap secret file %s: %m", filename);
-	    return 0;
-	}
-	check_access(f, filename);
-
-	ret = scan_authfile(f, client, server, secbuf, &addrs, &opts, filename);
-	fclose(f);
-	if (ret < 0)
-	    return 0;
-
-	if (am_server)
-	    set_allowed_addrs(unit, addrs, opts);
-	else if (opts != 0)
-	    free_wordlist(opts);
-	if (addrs != 0)
-	    free_wordlist(addrs);
-    }
-
-    len = strlen(secbuf);
-    if (len > MAXSECRETLEN) {
-	error("Secret for %s on %s is too long", client, server);
-	len = MAXSECRETLEN;
-    }
-    BCOPY(secbuf, secret, len);
-    BZERO(secbuf, sizeof(secbuf));
-    *secret_len = len;
-
-    return 1;
-}
-
-/*
- * set_allowed_addrs() - set the list of allowed addresses.
- * Also looks for `--' indicating options to apply for this peer
- * and leaves the following words in extra_options.
- */
-static void
-set_allowed_addrs(unit, addrs, opts)
-    int unit;
-    struct wordlist *addrs;
-    struct wordlist *opts;
-{
-    int n;
-    struct wordlist *ap, **plink;
-    struct permitted_ip *ip;
-    char *ptr_word, *ptr_mask;
-    struct hostent *hp;
-    u_int32_t a, mask, offset;
-    struct ipcp_options *wo = &ipcp_wantoptions[unit];
-    u_int32_t suggested_ip = 0;
-
-    if (addresses[unit] != NULL)
-	free(addresses[unit]);
-    addresses[unit] = NULL;
-    if (extra_options != NULL)
-	free_wordlist(extra_options);
-    extra_options = opts;
-
-    /*
-     * Count the number of IP addresses given.
-     */
-    n = wordlist_count(addrs) + wordlist_count(noauth_addrs);
-    if (n == 0)
-	return;
-    ip = (struct permitted_ip *) malloc((n + 1) * sizeof(struct permitted_ip));
-    if (ip == 0)
-	return;
-
-    /* temporarily append the noauth_addrs list to addrs */
-    for (plink = &addrs; *plink != NULL; plink = &(*plink)->next)
-	;
-    *plink = noauth_addrs;
-
-    n = 0;
-    for (ap = addrs; ap != NULL; ap = ap->next) {
-	/* "-" means no addresses authorized, "*" means any address allowed */
-	ptr_word = ap->word;
-	if (strcmp(ptr_word, "-") == 0)
-	    break;
-	if (strcmp(ptr_word, "*") == 0) {
-	    ip[n].permit = 1;
-	    ip[n].base = ip[n].mask = 0;
-	    ++n;
-	    break;
-	}
-
-	ip[n].permit = 1;
-	if (*ptr_word == '!') {
-	    ip[n].permit = 0;
-	    ++ptr_word;
-	}
-
-	mask = ~ (u_int32_t) 0;
-	offset = 0;
-	ptr_mask = strchr (ptr_word, '/');
-	if (ptr_mask != NULL) {
-	    int bit_count;
-	    char *endp;
-
-	    bit_count = (int) strtol (ptr_mask+1, &endp, 10);
-	    if (bit_count <= 0 || bit_count > 32) {
-		warn("invalid address length %v in auth. address list",
-		     ptr_mask+1);
-		continue;
-	    }
-	    bit_count = 32 - bit_count;	/* # bits in host part */
-	    if (*endp == '+') {
-		offset = ifunit + 1;
-		++endp;
-	    }
-	    if (*endp != 0) {
-		warn("invalid address length syntax: %v", ptr_mask+1);
-		continue;
-	    }
-	    *ptr_mask = '\0';
-	    mask <<= bit_count;
-	}
-
-	hp = gethostbyname(ptr_word);
-	if (hp != NULL && hp->h_addrtype == AF_INET) {
-	    a = *(u_int32_t *)hp->h_addr;
-	} else {
-		printf("*** getnetbyname is unsupported, please report bug! ***\n");
-		return;
-	}
-
-	if (ptr_mask != NULL)
-	    *ptr_mask = '/';
-
-	if (a == (u_int32_t)-1L) {
-	    warn("unknown host %s in auth. address list", ap->word);
-	    continue;
-	}
-	if (offset != 0) {
-	    if (offset >= ~mask) {
-		warn("interface unit %d too large for subnet %v",
-		     ifunit, ptr_word);
-		continue;
-	    }
-	    a = htonl((ntohl(a) & mask) + offset);
-	    mask = ~(u_int32_t)0;
-	}
-	ip[n].mask = htonl(mask);
-	ip[n].base = a & ip[n].mask;
-	++n;
-	if (~mask == 0 && suggested_ip == 0)
-	    suggested_ip = a;
-    }
-    *plink = NULL;
-
-    ip[n].permit = 0;		/* make the last entry forbid all addresses */
-    ip[n].base = 0;		/* to terminate the list */
-    ip[n].mask = 0;
-
-    addresses[unit] = ip;
-
-    /*
-     * If the address given for the peer isn't authorized, or if
-     * the user hasn't given one, AND there is an authorized address
-     * which is a single host, then use that if we find one.
-     */
-    if (suggested_ip != 0
-	&& (wo->hisaddr == 0 || !auth_ip_addr(unit, wo->hisaddr))) {
-	wo->hisaddr = suggested_ip;
-	/*
-	 * Do we insist on this address?  No, if there are other
-	 * addresses authorized than the suggested one.
-	 */
-	if (n > 1)
-	    wo->accept_remote = 1;
-    }
-}
-
-/*
- * auth_ip_addr - check whether the peer is authorized to use
- * a given IP address.  Returns 1 if authorized, 0 otherwise.
- */
-int
-auth_ip_addr(unit, addr)
-    int unit;
-    u_int32_t addr;
-{
-    int ok;
-
-    /* don't allow loopback or multicast address */
-    if (bad_ip_adrs(addr))
-	return 0;
-
-    if (addresses[unit] != NULL) {
-	ok = ip_addr_check(addr, addresses[unit]);
-	if (ok >= 0)
-	    return ok;
-    }
-    if (auth_required)
-	return 0;		/* no addresses authorized */
-    return allow_any_ip || privileged || !have_route_to(addr);
-}
-
-static int
-ip_addr_check(addr, addrs)
-    u_int32_t addr;
-    struct permitted_ip *addrs;
-{
-    for (; ; ++addrs)
-	if ((addr & addrs->mask) == addrs->base)
-	    return addrs->permit;
-}
-
-/*
- * bad_ip_adrs - return 1 if the IP address is one we don't want
- * to use, such as an address in the loopback net or a multicast address.
- * addr is in network byte order.
- */
-int
-bad_ip_adrs(addr)
-    u_int32_t addr;
-{
-    addr = ntohl(addr);
-    return (addr >> IN_CLASSA_NSHIFT) == IN_LOOPBACKNET
-	|| IN_MULTICAST(addr) || IN_BADCLASS(addr);
-}
-
-/*
- * some_ip_ok - check a wordlist to see if it authorizes any
- * IP address(es).
- */
-static int
-some_ip_ok(addrs)
-    struct wordlist *addrs;
-{
-    for (; addrs != 0; addrs = addrs->next) {
-	if (addrs->word[0] == '-')
-	    break;
-	if (addrs->word[0] != '!')
-	    return 1;		/* some IP address is allowed */
-    }
-    return 0;
-}
-
-/*
- * check_access - complain if a secret file has too-liberal permissions.
- */
-static void
-check_access(f, filename)
-    FILE *f;
-    char *filename;
-{
-    struct stat sbuf;
-
-    if (fstat(fileno(f), &sbuf) < 0) {
-	warn("cannot stat secret file %s: %m", filename);
-    } else if ((sbuf.st_mode & (S_IRWXG | S_IRWXO)) != 0) {
-	warn("Warning - secret file %s has world and/or group access",
-	     filename);
-    }
-}
-
-
-/*
- * scan_authfile - Scan an authorization file for a secret suitable
- * for authenticating `client' on `server'.  The return value is -1
- * if no secret is found, otherwise >= 0.  The return value has
- * NONWILD_CLIENT set if the secret didn't have "*" for the client, and
- * NONWILD_SERVER set if the secret didn't have "*" for the server.
- * Any following words on the line up to a "--" (i.e. address authorization
- * info) are placed in a wordlist and returned in *addrs.  Any
- * following words (extra options) are placed in a wordlist and
- * returned in *opts.
- * We assume secret is NULL or points to MAXWORDLEN bytes of space.
- */
-static int
-scan_authfile(f, client, server, secret, addrs, opts, filename)
-    FILE *f;
-    char *client;
-    char *server;
-    char *secret;
-    struct wordlist **addrs;
-    struct wordlist **opts;
-    char *filename;
-{
-    int newline, xxx;
-    int got_flag, best_flag;
-    FILE *sf;
-    struct wordlist *ap, *addr_list, *alist, **app;
-    char word[MAXWORDLEN];
-    char atfile[MAXWORDLEN];
-    char lsecret[MAXWORDLEN];
-
-    if (addrs != NULL)
-	*addrs = NULL;
-    if (opts != NULL)
-	*opts = NULL;
-    addr_list = NULL;
-    if (!getword(f, word, &newline, filename))
-	return -1;		/* file is empty??? */
-    newline = 1;
-    best_flag = -1;
-    for (;;) {
-	/*
-	 * Skip until we find a word at the start of a line.
-	 */
-	while (!newline && getword(f, word, &newline, filename))
-	    ;
-	if (!newline)
-	    break;		/* got to end of file */
-
-	/*
-	 * Got a client - check if it's a match or a wildcard.
-	 */
-	got_flag = 0;
-	if (client != NULL && strcmp(word, client) != 0 && !ISWILD(word)) {
-	    newline = 0;
-	    continue;
-	}
-	if (!ISWILD(word))
-	    got_flag = NONWILD_CLIENT;
-
-	/*
-	 * Now get a server and check if it matches.
-	 */
-	if (!getword(f, word, &newline, filename))
-	    break;
-	if (newline)
-	    continue;
-	if (!ISWILD(word)) {
-	    if (server != NULL && strcmp(word, server) != 0)
-		continue;
-	    got_flag |= NONWILD_SERVER;
-	}
-
-	/*
-	 * Got some sort of a match - see if it's better than what
-	 * we have already.
-	 */
-	if (got_flag <= best_flag)
-	    continue;
-
-	/*
-	 * Get the secret.
-	 */
-	if (!getword(f, word, &newline, filename))
-	    break;
-	if (newline)
-	    continue;
-
-	if (secret != NULL) {
-	    /*
-	     * Special syntax: @/pathname means read secret from file.
-	     */
-	    if (word[0] == '@' && word[1] == '/') {
-		strlcpy(atfile, word+1, sizeof(atfile));
-		if ((sf = fopen(atfile, "r")) == NULL) {
-		    warn("can't open indirect secret file %s", atfile);
-		    continue;
-		}
-		check_access(sf, atfile);
-		if (!getword(sf, word, &xxx, atfile)) {
-		    warn("no secret in indirect secret file %s", atfile);
-		    fclose(sf);
-		    continue;
-		}
-		fclose(sf);
-	    }
-	    strlcpy(lsecret, word, sizeof(lsecret));
-	}
-
-	/*
-	 * Now read address authorization info and make a wordlist.
-	 */
-	app = &alist;
-	for (;;) {
-	    if (!getword(f, word, &newline, filename) || newline)
-		break;
-	    ap = (struct wordlist *)
-		    malloc(sizeof(struct wordlist) + strlen(word) + 1);
-	    if (ap == NULL)
-		novm("authorized addresses");
-	    ap->word = (char *) (ap + 1);
-	    strcpy(ap->word, word);
-	    *app = ap;
-	    app = &ap->next;
-	}
-	*app = NULL;
-
-	/*
-	 * This is the best so far; remember it.
-	 */
-	best_flag = got_flag;
-	if (addr_list)
-	    free_wordlist(addr_list);
-	addr_list = alist;
-	if (secret != NULL)
-	    strlcpy(secret, lsecret, MAXWORDLEN);
-
-	if (!newline)
-	    break;
-    }
-
-    /* scan for a -- word indicating the start of options */
-    for (app = &addr_list; (ap = *app) != NULL; app = &ap->next)
-	if (strcmp(ap->word, "--") == 0)
-	    break;
-    /* ap = start of options */
-    if (ap != NULL) {
-	ap = ap->next;		/* first option */
-	free(*app);			/* free the "--" word */
-	*app = NULL;		/* terminate addr list */
-    }
-    if (opts != NULL)
-	*opts = ap;
-    else if (ap != NULL)
-	free_wordlist(ap);
-    if (addrs != NULL)
-	*addrs = addr_list;
-    else if (addr_list != NULL)
-	free_wordlist(addr_list);
-
-    return best_flag;
-}
-
-/*
- * wordlist_count - return the number of items in a wordlist
- */
-static int
-wordlist_count(wp)
-    struct wordlist *wp;
-{
-    int n;
-
-    for (n = 0; wp != NULL; wp = wp->next)
-	++n;
-    return n;
-}
-
-/*
- * free_wordlist - release memory allocated for a wordlist.
- */
-static void
-free_wordlist(wp)
-    struct wordlist *wp;
-{
-    struct wordlist *next;
-
-    while (wp != NULL) {
-	next = wp->next;
-	free(wp);
-	wp = next;
-    }
-}
-
-/*
- * auth_script_done - called when the auth-up or auth-down script
- * has finished.
- */
-static void
-auth_script_done(arg)
-    void *arg;
-{
-    auth_script_pid = 0;
-    switch (auth_script_state) {
-    case s_up:
-	if (auth_state == s_down) {
-	    auth_script_state = s_down;
-	    auth_script(_PATH_AUTHDOWN);
-	}
-	break;
-    case s_down:
-	if (auth_state == s_up) {
-	    auth_script_state = s_up;
-	    auth_script(_PATH_AUTHUP);
-	}
-	break;
-    }
-}
-
-/*
- * auth_script - execute a script with arguments
- * interface-name peer-name real-user tty speed
- */
-static void
-auth_script(script)
-    char *script;
-{
-    char strspeed[32];
-    struct passwd *pw;
-    char struid[32];
-    char *user_name;
-    char *argv[8];
-
-    if ((pw = getpwuid(getuid())) != NULL && pw->pw_name != NULL)
-	user_name = pw->pw_name;
-    else {
-	slprintf(struid, sizeof(struid), "%d", getuid());
-	user_name = struid;
-    }
-    slprintf(strspeed, sizeof(strspeed), "%d", baud_rate);
-
-    argv[0] = script;
-    argv[1] = ifname;
-    argv[2] = peer_authname;
-    argv[3] = user_name;
-    argv[4] = devnam;
-    argv[5] = strspeed;
-    argv[6] = NULL;
-
-    auth_script_pid = run_program(script, argv, 0, auth_script_done, NULL);
-}
diff --git a/mdk-stage1/ppp/pppd/cbcp.c b/mdk-stage1/ppp/pppd/cbcp.c
deleted file mode 100644
index 8c57b3cde..000000000
--- a/mdk-stage1/ppp/pppd/cbcp.c
+++ /dev/null
@@ -1,456 +0,0 @@
-/*
- * cbcp - Call Back Configuration Protocol.
- *
- * Copyright (c) 1995 Pedro Roque Marques
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Pedro Roque Marques.  The name of the author may not be used to
- * endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/time.h>
-
-#include "pppd.h"
-#include "cbcp.h"
-#include "fsm.h"
-#include "lcp.h"
-
-static const char rcsid[] = RCSID;
-
-/*
- * Options.
- */
-static int setcbcp __P((char **));
-
-static option_t cbcp_option_list[] = {
-    { "callback", o_special, setcbcp,
-      "Ask for callback", OPT_PRIO | OPT_A2STRVAL, &cbcp[0].us_number },
-    { NULL }
-};
-
-/*
- * Protocol entry points.
- */
-static void cbcp_init      __P((int unit));
-static void cbcp_open      __P((int unit));
-static void cbcp_lowerup   __P((int unit));
-static void cbcp_input     __P((int unit, u_char *pkt, int len));
-static void cbcp_protrej   __P((int unit));
-static int  cbcp_printpkt  __P((u_char *pkt, int len,
-				void (*printer) __P((void *, char *, ...)),
-				void *arg));
-
-struct protent cbcp_protent = {
-    PPP_CBCP,
-    cbcp_init,
-    cbcp_input,
-    cbcp_protrej,
-    cbcp_lowerup,
-    NULL,
-    cbcp_open,
-    NULL,
-    cbcp_printpkt,
-    NULL,
-    0,
-    "CBCP",
-    NULL,
-    cbcp_option_list,
-    NULL,
-    NULL,
-    NULL
-};
-
-cbcp_state cbcp[NUM_PPP];	
-
-/* internal prototypes */
-
-static void cbcp_recvreq __P((cbcp_state *us, char *pckt, int len));
-static void cbcp_resp __P((cbcp_state *us));
-static void cbcp_up __P((cbcp_state *us));
-static void cbcp_recvack __P((cbcp_state *us, char *pckt, int len));
-static void cbcp_send __P((cbcp_state *us, u_char code, u_char *buf, int len));
-
-/* option processing */
-static int
-setcbcp(argv)
-    char **argv;
-{
-    lcp_wantoptions[0].neg_cbcp = 1;
-    cbcp_protent.enabled_flag = 1;
-    cbcp[0].us_number = strdup(*argv);
-    if (cbcp[0].us_number == 0)
-	novm("callback number");
-    cbcp[0].us_type |= (1 << CB_CONF_USER);
-    cbcp[0].us_type |= (1 << CB_CONF_ADMIN);
-    return (1);
-}
-
-/* init state */
-static void
-cbcp_init(iface)
-    int iface;
-{
-    cbcp_state *us;
-
-    us = &cbcp[iface];
-    memset(us, 0, sizeof(cbcp_state));
-    us->us_unit = iface;
-    us->us_type |= (1 << CB_CONF_NO);
-}
-
-/* lower layer is up */
-static void
-cbcp_lowerup(iface)
-    int iface;
-{
-    cbcp_state *us = &cbcp[iface];
-
-    dbglog("cbcp_lowerup");
-    dbglog("want: %d", us->us_type);
-
-    if (us->us_type == CB_CONF_USER)
-        dbglog("phone no: %s", us->us_number);
-}
-
-static void
-cbcp_open(unit)
-    int unit;
-{
-    dbglog("cbcp_open");
-}
-
-/* process an incomming packet */
-static void
-cbcp_input(unit, inpacket, pktlen)
-    int unit;
-    u_char *inpacket;
-    int pktlen;
-{
-    u_char *inp;
-    u_char code, id;
-    u_short len;
-
-    cbcp_state *us = &cbcp[unit];
-
-    inp = inpacket;
-
-    if (pktlen < CBCP_MINLEN) {
-        error("CBCP packet is too small");
-	return;
-    }
-
-    GETCHAR(code, inp);
-    GETCHAR(id, inp);
-    GETSHORT(len, inp);
-
-#if 0
-    if (len > pktlen) {
-        error("CBCP packet: invalid length");
-        return;
-    }
-#endif
-
-    len -= CBCP_MINLEN;
- 
-    switch(code) {
-    case CBCP_REQ:
-        us->us_id = id;
-	cbcp_recvreq(us, inp, len);
-	break;
-
-    case CBCP_RESP:
-	dbglog("CBCP_RESP received");
-	break;
-
-    case CBCP_ACK:
-	if (id != us->us_id)
-	    dbglog("id doesn't match: expected %d recv %d",
-		   us->us_id, id);
-
-	cbcp_recvack(us, inp, len);
-	break;
-
-    default:
-	break;
-    }
-}
-
-/* protocol was rejected by foe */
-void cbcp_protrej(int iface)
-{
-}
-
-char *cbcp_codenames[] = {
-    "Request", "Response", "Ack"
-};
-
-char *cbcp_optionnames[] = {
-    "NoCallback",
-    "UserDefined",
-    "AdminDefined",
-    "List"
-};
-
-/* pretty print a packet */
-static int
-cbcp_printpkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int code, opt, id, len, olen, delay;
-    u_char *pstart;
-
-    if (plen < HEADERLEN)
-	return 0;
-    pstart = p;
-    GETCHAR(code, p);
-    GETCHAR(id, p);
-    GETSHORT(len, p);
-    if (len < HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(cbcp_codenames) / sizeof(char *))
-	printer(arg, " %s", cbcp_codenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code); 
-
-    printer(arg, " id=0x%x", id);
-    len -= HEADERLEN;
-
-    switch (code) {
-    case CBCP_REQ:
-    case CBCP_RESP:
-    case CBCP_ACK:
-        while(len >= 2) {
-	    GETCHAR(opt, p);
-	    GETCHAR(olen, p);
-
-	    if (olen < 2 || olen > len) {
-	        break;
-	    }
-
-	    printer(arg, " <");
-	    len -= olen;
-
-	    if (opt >= 1 && opt <= sizeof(cbcp_optionnames) / sizeof(char *))
-	    	printer(arg, " %s", cbcp_optionnames[opt-1]);
-	    else
-	        printer(arg, " option=0x%x", opt); 
-
-	    if (olen > 2) {
-	        GETCHAR(delay, p);
-		printer(arg, " delay = %d", delay);
-	    }
-
-	    if (olen > 3) {
-	        int addrt;
-		char str[256];
-
-		GETCHAR(addrt, p);
-		memcpy(str, p, olen - 4);
-		str[olen - 4] = 0;
-		printer(arg, " number = %s", str);
-	    }
-	    printer(arg, ">");
-	    break;
-	}
-
-    default:
-	break;
-    }
-
-    for (; len > 0; --len) {
-	GETCHAR(code, p);
-	printer(arg, " %.2x", code);
-    }
-
-    return p - pstart;
-}
-
-/* received CBCP request */
-static void
-cbcp_recvreq(us, pckt, pcktlen)
-    cbcp_state *us;
-    char *pckt;
-    int pcktlen;
-{
-    u_char type, opt_len, delay, addr_type;
-    char address[256];
-    int len = pcktlen;
-
-    address[0] = 0;
-
-    while (len) {
-        dbglog("length: %d", len);
-
-	GETCHAR(type, pckt);
-	GETCHAR(opt_len, pckt);
-
-	if (opt_len > 2)
-	    GETCHAR(delay, pckt);
-
-	us->us_allowed |= (1 << type);
-
-	switch(type) {
-	case CB_CONF_NO:
-	    dbglog("no callback allowed");
-	    break;
-
-	case CB_CONF_USER:
-	    dbglog("user callback allowed");
-	    if (opt_len > 4) {
-	        GETCHAR(addr_type, pckt);
-		memcpy(address, pckt, opt_len - 4);
-		address[opt_len - 4] = 0;
-		if (address[0])
-		    dbglog("address: %s", address);
-	    }
-	    break;
-
-	case CB_CONF_ADMIN:
-	    dbglog("user admin defined allowed");
-	    break;
-
-	case CB_CONF_LIST:
-	    break;
-	}
-	len -= opt_len;
-    }
-
-    cbcp_resp(us);
-}
-
-static void
-cbcp_resp(us)
-    cbcp_state *us;
-{
-    u_char cb_type;
-    u_char buf[256];
-    u_char *bufp = buf;
-    int len = 0;
-
-    cb_type = us->us_allowed & us->us_type;
-    dbglog("cbcp_resp cb_type=%d", cb_type);
-
-#if 0
-    if (!cb_type)
-        lcp_down(us->us_unit);
-#endif
-
-    if (cb_type & ( 1 << CB_CONF_USER ) ) {
-	dbglog("cbcp_resp CONF_USER");
-	PUTCHAR(CB_CONF_USER, bufp);
-	len = 3 + 1 + strlen(us->us_number) + 1;
-	PUTCHAR(len , bufp);
-	PUTCHAR(5, bufp); /* delay */
-	PUTCHAR(1, bufp);
-	BCOPY(us->us_number, bufp, strlen(us->us_number) + 1);
-	cbcp_send(us, CBCP_RESP, buf, len);
-	return;
-    }
-
-    if (cb_type & ( 1 << CB_CONF_ADMIN ) ) {
-	dbglog("cbcp_resp CONF_ADMIN");
-        PUTCHAR(CB_CONF_ADMIN, bufp);
-	len = 3;
-	PUTCHAR(len, bufp);
-	PUTCHAR(5, bufp); /* delay */
-	cbcp_send(us, CBCP_RESP, buf, len);
-	return;
-    }
-
-    if (cb_type & ( 1 << CB_CONF_NO ) ) {
-        dbglog("cbcp_resp CONF_NO");
-	PUTCHAR(CB_CONF_NO, bufp);
-	len = 3;
-	PUTCHAR(len , bufp);
-	PUTCHAR(0, bufp);
-	cbcp_send(us, CBCP_RESP, buf, len);
-	start_networks();
-	return;
-    }
-}
-
-static void
-cbcp_send(us, code, buf, len)
-    cbcp_state *us;
-    u_char code;
-    u_char *buf;
-    int len;
-{
-    u_char *outp;
-    int outlen;
-
-    outp = outpacket_buf;
-
-    outlen = 4 + len;
-    
-    MAKEHEADER(outp, PPP_CBCP);
-
-    PUTCHAR(code, outp);
-    PUTCHAR(us->us_id, outp);
-    PUTSHORT(outlen, outp);
-    
-    if (len)
-        BCOPY(buf, outp, len);
-
-    output(us->us_unit, outpacket_buf, outlen + PPP_HDRLEN);
-}
-
-static void
-cbcp_recvack(us, pckt, len)
-    cbcp_state *us;
-    char *pckt;
-    int len;
-{
-    u_char type, delay, addr_type;
-    int opt_len;
-    char address[256];
-
-    if (len) {
-        GETCHAR(type, pckt);
-	GETCHAR(opt_len, pckt);
-     
-	if (opt_len > 2)
-	    GETCHAR(delay, pckt);
-
-	if (opt_len > 4) {
-	    GETCHAR(addr_type, pckt);
-	    memcpy(address, pckt, opt_len - 4);
-	    address[opt_len - 4] = 0;
-	    if (address[0])
-	        dbglog("peer will call: %s", address);
-	}
-	if (type == CB_CONF_NO)
-	    return;
-    }
-
-    cbcp_up(us);
-}
-
-/* ok peer will do callback */
-static void
-cbcp_up(us)
-    cbcp_state *us;
-{
-    persist = 0;
-    lcp_close(0, "Call me back, please");
-    status = EXIT_CALLBACK;
-}
diff --git a/mdk-stage1/ppp/pppd/cbcp.h b/mdk-stage1/ppp/pppd/cbcp.h
deleted file mode 100644
index c2ab3f689..000000000
--- a/mdk-stage1/ppp/pppd/cbcp.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef CBCP_H
-#define CBCP_H
-
-typedef struct cbcp_state {
-    int    us_unit;	/* Interface unit number */
-    u_char us_id;		/* Current id */
-    u_char us_allowed;
-    int    us_type;
-    char   *us_number;    /* Telefone Number */
-} cbcp_state;
-
-extern cbcp_state cbcp[];
-
-extern struct protent cbcp_protent;
-
-#define CBCP_MINLEN 4
-
-#define CBCP_REQ    1
-#define CBCP_RESP   2
-#define CBCP_ACK    3
-
-#define CB_CONF_NO     1
-#define CB_CONF_USER   2
-#define CB_CONF_ADMIN  3
-#define CB_CONF_LIST   4
-#endif
diff --git a/mdk-stage1/ppp/pppd/ccp.c b/mdk-stage1/ppp/pppd/ccp.c
deleted file mode 100644
index 7e36e384e..000000000
--- a/mdk-stage1/ppp/pppd/ccp.c
+++ /dev/null
@@ -1,1257 +0,0 @@
-/*
- * ccp.c - PPP Compression Control Protocol.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdlib.h>
-#include <string.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ccp.h"
-#include <net/ppp-comp.h>
-
-static const char rcsid[] = RCSID;
-
-/*
- * Unfortunately there is a bug in zlib which means that using a
- * size of 8 (window size = 256) for Deflate compression will cause
- * buffer overruns and kernel crashes in the deflate module.
- * Until this is fixed we only accept sizes in the range 9 .. 15.
- * Thanks to James Carlson for pointing this out.
- */
-#define DEFLATE_MIN_WORKS	9
-
-/*
- * Command-line options.
- */
-static int setbsdcomp __P((char **));
-static int setdeflate __P((char **));
-static char bsd_value[8];
-static char deflate_value[8];
-
-static option_t ccp_option_list[] = {
-    { "noccp", o_bool, &ccp_protent.enabled_flag,
-      "Disable CCP negotiation" },
-    { "-ccp", o_bool, &ccp_protent.enabled_flag,
-      "Disable CCP negotiation", OPT_ALIAS },
-
-    { "bsdcomp", o_special, (void *)setbsdcomp,
-      "Request BSD-Compress packet compression",
-      OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, bsd_value },
-    { "nobsdcomp", o_bool, &ccp_wantoptions[0].bsd_compress,
-      "don't allow BSD-Compress", OPT_PRIOSUB | OPT_A2CLR,
-      &ccp_allowoptions[0].bsd_compress },
-    { "-bsdcomp", o_bool, &ccp_wantoptions[0].bsd_compress,
-      "don't allow BSD-Compress", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
-      &ccp_allowoptions[0].bsd_compress },
-
-    { "deflate", o_special, (void *)setdeflate,
-      "request Deflate compression",
-      OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, deflate_value },
-    { "nodeflate", o_bool, &ccp_wantoptions[0].deflate,
-      "don't allow Deflate compression", OPT_PRIOSUB | OPT_A2CLR,
-      &ccp_allowoptions[0].deflate },
-    { "-deflate", o_bool, &ccp_wantoptions[0].deflate,
-      "don't allow Deflate compression", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
-      &ccp_allowoptions[0].deflate },
-
-    { "nodeflatedraft", o_bool, &ccp_wantoptions[0].deflate_draft,
-      "don't use draft deflate #", OPT_A2COPY,
-      &ccp_allowoptions[0].deflate_draft },
-
-    { "predictor1", o_bool, &ccp_wantoptions[0].predictor_1,
-      "request Predictor-1", 1, &ccp_allowoptions[0].predictor_1, OPT_PRIO },
-    { "nopredictor1", o_bool, &ccp_wantoptions[0].predictor_1,
-      "don't allow Predictor-1", OPT_PRIOSUB | OPT_A2CLR,
-      &ccp_allowoptions[0].predictor_1 },
-    { "-predictor1", o_bool, &ccp_wantoptions[0].predictor_1,
-      "don't allow Predictor-1", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
-      &ccp_allowoptions[0].predictor_1 },
-
-    { NULL }
-};
-
-/*
- * Protocol entry points from main code.
- */
-static void ccp_init __P((int unit));
-static void ccp_open __P((int unit));
-static void ccp_close __P((int unit, char *));
-static void ccp_lowerup __P((int unit));
-static void ccp_lowerdown __P((int));
-static void ccp_input __P((int unit, u_char *pkt, int len));
-static void ccp_protrej __P((int unit));
-static int  ccp_printpkt __P((u_char *pkt, int len,
-			      void (*printer) __P((void *, char *, ...)),
-			      void *arg));
-static void ccp_datainput __P((int unit, u_char *pkt, int len));
-
-struct protent ccp_protent = {
-    PPP_CCP,
-    ccp_init,
-    ccp_input,
-    ccp_protrej,
-    ccp_lowerup,
-    ccp_lowerdown,
-    ccp_open,
-    ccp_close,
-    ccp_printpkt,
-    ccp_datainput,
-    1,
-    "CCP",
-    "Compressed",
-    ccp_option_list,
-    NULL,
-    NULL,
-    NULL
-};
-
-fsm ccp_fsm[NUM_PPP];
-ccp_options ccp_wantoptions[NUM_PPP];	/* what to request the peer to use */
-ccp_options ccp_gotoptions[NUM_PPP];	/* what the peer agreed to do */
-ccp_options ccp_allowoptions[NUM_PPP];	/* what we'll agree to do */
-ccp_options ccp_hisoptions[NUM_PPP];	/* what we agreed to do */
-
-/*
- * Callbacks for fsm code.
- */
-static void ccp_resetci __P((fsm *));
-static int  ccp_cilen __P((fsm *));
-static void ccp_addci __P((fsm *, u_char *, int *));
-static int  ccp_ackci __P((fsm *, u_char *, int));
-static int  ccp_nakci __P((fsm *, u_char *, int));
-static int  ccp_rejci __P((fsm *, u_char *, int));
-static int  ccp_reqci __P((fsm *, u_char *, int *, int));
-static void ccp_up __P((fsm *));
-static void ccp_down __P((fsm *));
-static int  ccp_extcode __P((fsm *, int, int, u_char *, int));
-static void ccp_rack_timeout __P((void *));
-static char *method_name __P((ccp_options *, ccp_options *));
-
-static fsm_callbacks ccp_callbacks = {
-    ccp_resetci,
-    ccp_cilen,
-    ccp_addci,
-    ccp_ackci,
-    ccp_nakci,
-    ccp_rejci,
-    ccp_reqci,
-    ccp_up,
-    ccp_down,
-    NULL,
-    NULL,
-    NULL,
-    NULL,
-    ccp_extcode,
-    "CCP"
-};
-
-/*
- * Do we want / did we get any compression?
- */
-#define ANY_COMPRESS(opt)	((opt).deflate || (opt).bsd_compress \
-				 || (opt).predictor_1 || (opt).predictor_2)
-
-/*
- * Local state (mainly for handling reset-reqs and reset-acks).
- */
-static int ccp_localstate[NUM_PPP];
-#define RACK_PENDING	1	/* waiting for reset-ack */
-#define RREQ_REPEAT	2	/* send another reset-req if no reset-ack */
-
-#define RACKTIMEOUT	1	/* second */
-
-static int all_rejected[NUM_PPP];	/* we rejected all peer's options */
-
-/*
- * Option parsing.
- */
-static int
-setbsdcomp(argv)
-    char **argv;
-{
-    int rbits, abits;
-    char *str, *endp;
-
-    str = *argv;
-    abits = rbits = strtol(str, &endp, 0);
-    if (endp != str && *endp == ',') {
-	str = endp + 1;
-	abits = strtol(str, &endp, 0);
-    }
-    if (*endp != 0 || endp == str) {
-	option_error("invalid parameter '%s' for bsdcomp option", *argv);
-	return 0;
-    }
-    if ((rbits != 0 && (rbits < BSD_MIN_BITS || rbits > BSD_MAX_BITS))
-	|| (abits != 0 && (abits < BSD_MIN_BITS || abits > BSD_MAX_BITS))) {
-	option_error("bsdcomp option values must be 0 or %d .. %d",
-		     BSD_MIN_BITS, BSD_MAX_BITS);
-	return 0;
-    }
-    if (rbits > 0) {
-	ccp_wantoptions[0].bsd_compress = 1;
-	ccp_wantoptions[0].bsd_bits = rbits;
-    } else
-	ccp_wantoptions[0].bsd_compress = 0;
-    if (abits > 0) {
-	ccp_allowoptions[0].bsd_compress = 1;
-	ccp_allowoptions[0].bsd_bits = abits;
-    } else
-	ccp_allowoptions[0].bsd_compress = 0;
-    slprintf(bsd_value, sizeof(bsd_value),
-	     rbits == abits? "%d": "%d,%d", rbits, abits);
-
-    return 1;
-}
-
-static int
-setdeflate(argv)
-    char **argv;
-{
-    int rbits, abits;
-    char *str, *endp;
-
-    str = *argv;
-    abits = rbits = strtol(str, &endp, 0);
-    if (endp != str && *endp == ',') {
-	str = endp + 1;
-	abits = strtol(str, &endp, 0);
-    }
-    if (*endp != 0 || endp == str) {
-	option_error("invalid parameter '%s' for deflate option", *argv);
-	return 0;
-    }
-    if ((rbits != 0 && (rbits < DEFLATE_MIN_SIZE || rbits > DEFLATE_MAX_SIZE))
-	|| (abits != 0 && (abits < DEFLATE_MIN_SIZE
-			  || abits > DEFLATE_MAX_SIZE))) {
-	option_error("deflate option values must be 0 or %d .. %d",
-		     DEFLATE_MIN_SIZE, DEFLATE_MAX_SIZE);
-	return 0;
-    }
-    if (rbits == DEFLATE_MIN_SIZE || abits == DEFLATE_MIN_SIZE) {
-	if (rbits == DEFLATE_MIN_SIZE)
-	    rbits = DEFLATE_MIN_WORKS;
-	if (abits == DEFLATE_MIN_SIZE)
-	    abits = DEFLATE_MIN_WORKS;
-	warn("deflate option value of %d changed to %d to avoid zlib bug",
-	     DEFLATE_MIN_SIZE, DEFLATE_MIN_WORKS);
-    }
-    if (rbits > 0) {
-	ccp_wantoptions[0].deflate = 1;
-	ccp_wantoptions[0].deflate_size = rbits;
-    } else
-	ccp_wantoptions[0].deflate = 0;
-    if (abits > 0) {
-	ccp_allowoptions[0].deflate = 1;
-	ccp_allowoptions[0].deflate_size = abits;
-    } else
-	ccp_allowoptions[0].deflate = 0;
-    slprintf(deflate_value, sizeof(deflate_value),
-	     rbits == abits? "%d": "%d,%d", rbits, abits);
-
-    return 1;
-}
-
-/*
- * ccp_init - initialize CCP.
- */
-static void
-ccp_init(unit)
-    int unit;
-{
-    fsm *f = &ccp_fsm[unit];
-
-    f->unit = unit;
-    f->protocol = PPP_CCP;
-    f->callbacks = &ccp_callbacks;
-    fsm_init(f);
-
-    memset(&ccp_wantoptions[unit],  0, sizeof(ccp_options));
-    memset(&ccp_gotoptions[unit],   0, sizeof(ccp_options));
-    memset(&ccp_allowoptions[unit], 0, sizeof(ccp_options));
-    memset(&ccp_hisoptions[unit],   0, sizeof(ccp_options));
-
-    ccp_wantoptions[0].deflate = 1;
-    ccp_wantoptions[0].deflate_size = DEFLATE_MAX_SIZE;
-    ccp_wantoptions[0].deflate_correct = 1;
-    ccp_wantoptions[0].deflate_draft = 1;
-    ccp_allowoptions[0].deflate = 1;
-    ccp_allowoptions[0].deflate_size = DEFLATE_MAX_SIZE;
-    ccp_allowoptions[0].deflate_correct = 1;
-    ccp_allowoptions[0].deflate_draft = 1;
-
-    ccp_wantoptions[0].bsd_compress = 1;
-    ccp_wantoptions[0].bsd_bits = BSD_MAX_BITS;
-    ccp_allowoptions[0].bsd_compress = 1;
-    ccp_allowoptions[0].bsd_bits = BSD_MAX_BITS;
-
-    ccp_allowoptions[0].predictor_1 = 1;
-}
-
-/*
- * ccp_open - CCP is allowed to come up.
- */
-static void
-ccp_open(unit)
-    int unit;
-{
-    fsm *f = &ccp_fsm[unit];
-
-    if (f->state != OPENED)
-	ccp_flags_set(unit, 1, 0);
-
-    /*
-     * Find out which compressors the kernel supports before
-     * deciding whether to open in silent mode.
-     */
-    ccp_resetci(f);
-    if (!ANY_COMPRESS(ccp_gotoptions[unit]))
-	f->flags |= OPT_SILENT;
-
-    fsm_open(f);
-}
-
-/*
- * ccp_close - Terminate CCP.
- */
-static void
-ccp_close(unit, reason)
-    int unit;
-    char *reason;
-{
-    ccp_flags_set(unit, 0, 0);
-    fsm_close(&ccp_fsm[unit], reason);
-}
-
-/*
- * ccp_lowerup - we may now transmit CCP packets.
- */
-static void
-ccp_lowerup(unit)
-    int unit;
-{
-    fsm_lowerup(&ccp_fsm[unit]);
-}
-
-/*
- * ccp_lowerdown - we may not transmit CCP packets.
- */
-static void
-ccp_lowerdown(unit)
-    int unit;
-{
-    fsm_lowerdown(&ccp_fsm[unit]);
-}
-
-/*
- * ccp_input - process a received CCP packet.
- */
-static void
-ccp_input(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    fsm *f = &ccp_fsm[unit];
-    int oldstate;
-
-    /*
-     * Check for a terminate-request so we can print a message.
-     */
-    oldstate = f->state;
-    fsm_input(f, p, len);
-    if (oldstate == OPENED && p[0] == TERMREQ && f->state != OPENED)
-	notice("Compression disabled by peer.");
-
-    /*
-     * If we get a terminate-ack and we're not asking for compression,
-     * close CCP.
-     */
-    if (oldstate == REQSENT && p[0] == TERMACK
-	&& !ANY_COMPRESS(ccp_gotoptions[unit]))
-	ccp_close(unit, "No compression negotiated");
-}
-
-/*
- * Handle a CCP-specific code.
- */
-static int
-ccp_extcode(f, code, id, p, len)
-    fsm *f;
-    int code, id;
-    u_char *p;
-    int len;
-{
-    switch (code) {
-    case CCP_RESETREQ:
-	if (f->state != OPENED)
-	    break;
-	/* send a reset-ack, which the transmitter will see and
-	   reset its compression state. */
-	fsm_sdata(f, CCP_RESETACK, id, NULL, 0);
-	break;
-
-    case CCP_RESETACK:
-	if (ccp_localstate[f->unit] & RACK_PENDING && id == f->reqid) {
-	    ccp_localstate[f->unit] &= ~(RACK_PENDING | RREQ_REPEAT);
-	    UNTIMEOUT(ccp_rack_timeout, f);
-	}
-	break;
-
-    default:
-	return 0;
-    }
-
-    return 1;
-}
-
-/*
- * ccp_protrej - peer doesn't talk CCP.
- */
-static void
-ccp_protrej(unit)
-    int unit;
-{
-    ccp_flags_set(unit, 0, 0);
-    fsm_lowerdown(&ccp_fsm[unit]);
-}
-
-/*
- * ccp_resetci - initialize at start of negotiation.
- */
-static void
-ccp_resetci(f)
-    fsm *f;
-{
-    ccp_options *go = &ccp_gotoptions[f->unit];
-    u_char opt_buf[16];
-
-    *go = ccp_wantoptions[f->unit];
-    all_rejected[f->unit] = 0;
-
-    /*
-     * Check whether the kernel knows about the various
-     * compression methods we might request.
-     */
-    if (go->bsd_compress) {
-	opt_buf[0] = CI_BSD_COMPRESS;
-	opt_buf[1] = CILEN_BSD_COMPRESS;
-	opt_buf[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, BSD_MIN_BITS);
-	if (ccp_test(f->unit, opt_buf, CILEN_BSD_COMPRESS, 0) <= 0)
-	    go->bsd_compress = 0;
-    }
-    if (go->deflate) {
-	if (go->deflate_correct) {
-	    opt_buf[0] = CI_DEFLATE;
-	    opt_buf[1] = CILEN_DEFLATE;
-	    opt_buf[2] = DEFLATE_MAKE_OPT(DEFLATE_MIN_WORKS);
-	    opt_buf[3] = DEFLATE_CHK_SEQUENCE;
-	    if (ccp_test(f->unit, opt_buf, CILEN_DEFLATE, 0) <= 0)
-		go->deflate_correct = 0;
-	}
-	if (go->deflate_draft) {
-	    opt_buf[0] = CI_DEFLATE_DRAFT;
-	    opt_buf[1] = CILEN_DEFLATE;
-	    opt_buf[2] = DEFLATE_MAKE_OPT(DEFLATE_MIN_WORKS);
-	    opt_buf[3] = DEFLATE_CHK_SEQUENCE;
-	    if (ccp_test(f->unit, opt_buf, CILEN_DEFLATE, 0) <= 0)
-		go->deflate_draft = 0;
-	}
-	if (!go->deflate_correct && !go->deflate_draft)
-	    go->deflate = 0;
-    }
-    if (go->predictor_1) {
-	opt_buf[0] = CI_PREDICTOR_1;
-	opt_buf[1] = CILEN_PREDICTOR_1;
-	if (ccp_test(f->unit, opt_buf, CILEN_PREDICTOR_1, 0) <= 0)
-	    go->predictor_1 = 0;
-    }
-    if (go->predictor_2) {
-	opt_buf[0] = CI_PREDICTOR_2;
-	opt_buf[1] = CILEN_PREDICTOR_2;
-	if (ccp_test(f->unit, opt_buf, CILEN_PREDICTOR_2, 0) <= 0)
-	    go->predictor_2 = 0;
-    }
-}
-
-/*
- * ccp_cilen - Return total length of our configuration info.
- */
-static int
-ccp_cilen(f)
-    fsm *f;
-{
-    ccp_options *go = &ccp_gotoptions[f->unit];
-
-    return (go->bsd_compress? CILEN_BSD_COMPRESS: 0)
-	+ (go->deflate? CILEN_DEFLATE: 0)
-	+ (go->predictor_1? CILEN_PREDICTOR_1: 0)
-	+ (go->predictor_2? CILEN_PREDICTOR_2: 0);
-}
-
-/*
- * ccp_addci - put our requests in a packet.
- */
-static void
-ccp_addci(f, p, lenp)
-    fsm *f;
-    u_char *p;
-    int *lenp;
-{
-    int res;
-    ccp_options *go = &ccp_gotoptions[f->unit];
-    u_char *p0 = p;
-
-    /*
-     * Add the compression types that we can receive, in decreasing
-     * preference order.  Get the kernel to allocate the first one
-     * in case it gets Acked.
-     */
-    if (go->deflate) {
-	p[0] = go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT;
-	p[1] = CILEN_DEFLATE;
-	p[2] = DEFLATE_MAKE_OPT(go->deflate_size);
-	p[3] = DEFLATE_CHK_SEQUENCE;
-	for (;;) {
-	    res = ccp_test(f->unit, p, CILEN_DEFLATE, 0);
-	    if (res > 0) {
-		p += CILEN_DEFLATE;
-		break;
-	    }
-	    if (res < 0 || go->deflate_size <= DEFLATE_MIN_WORKS) {
-		go->deflate = 0;
-		break;
-	    }
-	    --go->deflate_size;
-	    p[2] = DEFLATE_MAKE_OPT(go->deflate_size);
-	}
-	if (p != p0 && go->deflate_correct && go->deflate_draft) {
-	    p[0] = CI_DEFLATE_DRAFT;
-	    p[1] = CILEN_DEFLATE;
-	    p[2] = p[2 - CILEN_DEFLATE];
-	    p[3] = DEFLATE_CHK_SEQUENCE;
-	    p += CILEN_DEFLATE;
-	}
-    }
-    if (go->bsd_compress) {
-	p[0] = CI_BSD_COMPRESS;
-	p[1] = CILEN_BSD_COMPRESS;
-	p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits);
-	if (p != p0) {
-	    p += CILEN_BSD_COMPRESS;	/* not the first option */
-	} else {
-	    for (;;) {
-		res = ccp_test(f->unit, p, CILEN_BSD_COMPRESS, 0);
-		if (res > 0) {
-		    p += CILEN_BSD_COMPRESS;
-		    break;
-		}
-		if (res < 0 || go->bsd_bits <= BSD_MIN_BITS) {
-		    go->bsd_compress = 0;
-		    break;
-		}
-		--go->bsd_bits;
-		p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits);
-	    }
-	}
-    }
-    /* XXX Should Predictor 2 be preferable to Predictor 1? */
-    if (go->predictor_1) {
-	p[0] = CI_PREDICTOR_1;
-	p[1] = CILEN_PREDICTOR_1;
-	if (p == p0 && ccp_test(f->unit, p, CILEN_PREDICTOR_1, 0) <= 0) {
-	    go->predictor_1 = 0;
-	} else {
-	    p += CILEN_PREDICTOR_1;
-	}
-    }
-    if (go->predictor_2) {
-	p[0] = CI_PREDICTOR_2;
-	p[1] = CILEN_PREDICTOR_2;
-	if (p == p0 && ccp_test(f->unit, p, CILEN_PREDICTOR_2, 0) <= 0) {
-	    go->predictor_2 = 0;
-	} else {
-	    p += CILEN_PREDICTOR_2;
-	}
-    }
-
-    go->method = (p > p0)? p0[0]: -1;
-
-    *lenp = p - p0;
-}
-
-/*
- * ccp_ackci - process a received configure-ack, and return
- * 1 iff the packet was OK.
- */
-static int
-ccp_ackci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ccp_options *go = &ccp_gotoptions[f->unit];
-    u_char *p0 = p;
-
-    if (go->deflate) {
-	if (len < CILEN_DEFLATE
-	    || p[0] != (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
-	    || p[1] != CILEN_DEFLATE
-	    || p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
-	    || p[3] != DEFLATE_CHK_SEQUENCE)
-	    return 0;
-	p += CILEN_DEFLATE;
-	len -= CILEN_DEFLATE;
-	/* XXX Cope with first/fast ack */
-	if (len == 0)
-	    return 1;
-	if (go->deflate_correct && go->deflate_draft) {
-	    if (len < CILEN_DEFLATE
-		|| p[0] != CI_DEFLATE_DRAFT
-		|| p[1] != CILEN_DEFLATE
-		|| p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
-		|| p[3] != DEFLATE_CHK_SEQUENCE)
-		return 0;
-	    p += CILEN_DEFLATE;
-	    len -= CILEN_DEFLATE;
-	}
-    }
-    if (go->bsd_compress) {
-	if (len < CILEN_BSD_COMPRESS
-	    || p[0] != CI_BSD_COMPRESS || p[1] != CILEN_BSD_COMPRESS
-	    || p[2] != BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits))
-	    return 0;
-	p += CILEN_BSD_COMPRESS;
-	len -= CILEN_BSD_COMPRESS;
-	/* XXX Cope with first/fast ack */
-	if (p == p0 && len == 0)
-	    return 1;
-    }
-    if (go->predictor_1) {
-	if (len < CILEN_PREDICTOR_1
-	    || p[0] != CI_PREDICTOR_1 || p[1] != CILEN_PREDICTOR_1)
-	    return 0;
-	p += CILEN_PREDICTOR_1;
-	len -= CILEN_PREDICTOR_1;
-	/* XXX Cope with first/fast ack */
-	if (p == p0 && len == 0)
-	    return 1;
-    }
-    if (go->predictor_2) {
-	if (len < CILEN_PREDICTOR_2
-	    || p[0] != CI_PREDICTOR_2 || p[1] != CILEN_PREDICTOR_2)
-	    return 0;
-	p += CILEN_PREDICTOR_2;
-	len -= CILEN_PREDICTOR_2;
-	/* XXX Cope with first/fast ack */
-	if (p == p0 && len == 0)
-	    return 1;
-    }
-
-    if (len != 0)
-	return 0;
-    return 1;
-}
-
-/*
- * ccp_nakci - process received configure-nak.
- * Returns 1 iff the nak was OK.
- */
-static int
-ccp_nakci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ccp_options *go = &ccp_gotoptions[f->unit];
-    ccp_options no;		/* options we've seen already */
-    ccp_options try;		/* options to ask for next time */
-
-    memset(&no, 0, sizeof(no));
-    try = *go;
-
-    if (go->deflate && len >= CILEN_DEFLATE
-	&& p[0] == (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
-	&& p[1] == CILEN_DEFLATE) {
-	no.deflate = 1;
-	/*
-	 * Peer wants us to use a different code size or something.
-	 * Stop asking for Deflate if we don't understand his suggestion.
-	 */
-	if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL
-	    || DEFLATE_SIZE(p[2]) < DEFLATE_MIN_WORKS
-	    || p[3] != DEFLATE_CHK_SEQUENCE)
-	    try.deflate = 0;
-	else if (DEFLATE_SIZE(p[2]) < go->deflate_size)
-	    try.deflate_size = DEFLATE_SIZE(p[2]);
-	p += CILEN_DEFLATE;
-	len -= CILEN_DEFLATE;
-	if (go->deflate_correct && go->deflate_draft
-	    && len >= CILEN_DEFLATE && p[0] == CI_DEFLATE_DRAFT
-	    && p[1] == CILEN_DEFLATE) {
-	    p += CILEN_DEFLATE;
-	    len -= CILEN_DEFLATE;
-	}
-    }
-
-    if (go->bsd_compress && len >= CILEN_BSD_COMPRESS
-	&& p[0] == CI_BSD_COMPRESS && p[1] == CILEN_BSD_COMPRESS) {
-	no.bsd_compress = 1;
-	/*
-	 * Peer wants us to use a different number of bits
-	 * or a different version.
-	 */
-	if (BSD_VERSION(p[2]) != BSD_CURRENT_VERSION)
-	    try.bsd_compress = 0;
-	else if (BSD_NBITS(p[2]) < go->bsd_bits)
-	    try.bsd_bits = BSD_NBITS(p[2]);
-	p += CILEN_BSD_COMPRESS;
-	len -= CILEN_BSD_COMPRESS;
-    }
-
-    /*
-     * Predictor-1 and 2 have no options, so they can't be Naked.
-     *
-     * There may be remaining options but we ignore them.
-     */
-
-    if (f->state != OPENED)
-	*go = try;
-    return 1;
-}
-
-/*
- * ccp_rejci - reject some of our suggested compression methods.
- */
-static int
-ccp_rejci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ccp_options *go = &ccp_gotoptions[f->unit];
-    ccp_options try;		/* options to request next time */
-
-    try = *go;
-
-    /*
-     * Cope with empty configure-rejects by ceasing to send
-     * configure-requests.
-     */
-    if (len == 0 && all_rejected[f->unit])
-	return -1;
-
-    if (go->deflate && len >= CILEN_DEFLATE
-	&& p[0] == (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
-	&& p[1] == CILEN_DEFLATE) {
-	if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
-	    || p[3] != DEFLATE_CHK_SEQUENCE)
-	    return 0;		/* Rej is bad */
-	if (go->deflate_correct)
-	    try.deflate_correct = 0;
-	else
-	    try.deflate_draft = 0;
-	p += CILEN_DEFLATE;
-	len -= CILEN_DEFLATE;
-	if (go->deflate_correct && go->deflate_draft
-	    && len >= CILEN_DEFLATE && p[0] == CI_DEFLATE_DRAFT
-	    && p[1] == CILEN_DEFLATE) {
-	    if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
-		|| p[3] != DEFLATE_CHK_SEQUENCE)
-		return 0;		/* Rej is bad */
-	    try.deflate_draft = 0;
-	    p += CILEN_DEFLATE;
-	    len -= CILEN_DEFLATE;
-	}
-	if (!try.deflate_correct && !try.deflate_draft)
-	    try.deflate = 0;
-    }
-    if (go->bsd_compress && len >= CILEN_BSD_COMPRESS
-	&& p[0] == CI_BSD_COMPRESS && p[1] == CILEN_BSD_COMPRESS) {
-	if (p[2] != BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits))
-	    return 0;
-	try.bsd_compress = 0;
-	p += CILEN_BSD_COMPRESS;
-	len -= CILEN_BSD_COMPRESS;
-    }
-    if (go->predictor_1 && len >= CILEN_PREDICTOR_1
-	&& p[0] == CI_PREDICTOR_1 && p[1] == CILEN_PREDICTOR_1) {
-	try.predictor_1 = 0;
-	p += CILEN_PREDICTOR_1;
-	len -= CILEN_PREDICTOR_1;
-    }
-    if (go->predictor_2 && len >= CILEN_PREDICTOR_2
-	&& p[0] == CI_PREDICTOR_2 && p[1] == CILEN_PREDICTOR_2) {
-	try.predictor_2 = 0;
-	p += CILEN_PREDICTOR_2;
-	len -= CILEN_PREDICTOR_2;
-    }
-
-    if (len != 0)
-	return 0;
-
-    if (f->state != OPENED)
-	*go = try;
-
-    return 1;
-}
-
-/*
- * ccp_reqci - processed a received configure-request.
- * Returns CONFACK, CONFNAK or CONFREJ and the packet modified
- * appropriately.
- */
-static int
-ccp_reqci(f, p, lenp, dont_nak)
-    fsm *f;
-    u_char *p;
-    int *lenp;
-    int dont_nak;
-{
-    int ret, newret, res;
-    u_char *p0, *retp;
-    int len, clen, type, nb;
-    ccp_options *ho = &ccp_hisoptions[f->unit];
-    ccp_options *ao = &ccp_allowoptions[f->unit];
-
-    ret = CONFACK;
-    retp = p0 = p;
-    len = *lenp;
-
-    memset(ho, 0, sizeof(ccp_options));
-    ho->method = (len > 0)? p[0]: -1;
-
-    while (len > 0) {
-	newret = CONFACK;
-	if (len < 2 || p[1] < 2 || p[1] > len) {
-	    /* length is bad */
-	    clen = len;
-	    newret = CONFREJ;
-
-	} else {
-	    type = p[0];
-	    clen = p[1];
-
-	    switch (type) {
-	    case CI_DEFLATE:
-	    case CI_DEFLATE_DRAFT:
-		if (!ao->deflate || clen != CILEN_DEFLATE
-		    || (!ao->deflate_correct && type == CI_DEFLATE)
-		    || (!ao->deflate_draft && type == CI_DEFLATE_DRAFT)) {
-		    newret = CONFREJ;
-		    break;
-		}
-
-		ho->deflate = 1;
-		ho->deflate_size = nb = DEFLATE_SIZE(p[2]);
-		if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL
-		    || p[3] != DEFLATE_CHK_SEQUENCE
-		    || nb > ao->deflate_size || nb < DEFLATE_MIN_WORKS) {
-		    newret = CONFNAK;
-		    if (!dont_nak) {
-			p[2] = DEFLATE_MAKE_OPT(ao->deflate_size);
-			p[3] = DEFLATE_CHK_SEQUENCE;
-			/* fall through to test this #bits below */
-		    } else
-			break;
-		}
-
-		/*
-		 * Check whether we can do Deflate with the window
-		 * size they want.  If the window is too big, reduce
-		 * it until the kernel can cope and nak with that.
-		 * We only check this for the first option.
-		 */
-		if (p == p0) {
-		    for (;;) {
-			res = ccp_test(f->unit, p, CILEN_DEFLATE, 1);
-			if (res > 0)
-			    break;		/* it's OK now */
-			if (res < 0 || nb == DEFLATE_MIN_WORKS || dont_nak) {
-			    newret = CONFREJ;
-			    p[2] = DEFLATE_MAKE_OPT(ho->deflate_size);
-			    break;
-			}
-			newret = CONFNAK;
-			--nb;
-			p[2] = DEFLATE_MAKE_OPT(nb);
-		    }
-		}
-		break;
-
-	    case CI_BSD_COMPRESS:
-		if (!ao->bsd_compress || clen != CILEN_BSD_COMPRESS) {
-		    newret = CONFREJ;
-		    break;
-		}
-
-		ho->bsd_compress = 1;
-		ho->bsd_bits = nb = BSD_NBITS(p[2]);
-		if (BSD_VERSION(p[2]) != BSD_CURRENT_VERSION
-		    || nb > ao->bsd_bits || nb < BSD_MIN_BITS) {
-		    newret = CONFNAK;
-		    if (!dont_nak) {
-			p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, ao->bsd_bits);
-			/* fall through to test this #bits below */
-		    } else
-			break;
-		}
-
-		/*
-		 * Check whether we can do BSD-Compress with the code
-		 * size they want.  If the code size is too big, reduce
-		 * it until the kernel can cope and nak with that.
-		 * We only check this for the first option.
-		 */
-		if (p == p0) {
-		    for (;;) {
-			res = ccp_test(f->unit, p, CILEN_BSD_COMPRESS, 1);
-			if (res > 0)
-			    break;
-			if (res < 0 || nb == BSD_MIN_BITS || dont_nak) {
-			    newret = CONFREJ;
-			    p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION,
-						ho->bsd_bits);
-			    break;
-			}
-			newret = CONFNAK;
-			--nb;
-			p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, nb);
-		    }
-		}
-		break;
-
-	    case CI_PREDICTOR_1:
-		if (!ao->predictor_1 || clen != CILEN_PREDICTOR_1) {
-		    newret = CONFREJ;
-		    break;
-		}
-
-		ho->predictor_1 = 1;
-		if (p == p0
-		    && ccp_test(f->unit, p, CILEN_PREDICTOR_1, 1) <= 0) {
-		    newret = CONFREJ;
-		}
-		break;
-
-	    case CI_PREDICTOR_2:
-		if (!ao->predictor_2 || clen != CILEN_PREDICTOR_2) {
-		    newret = CONFREJ;
-		    break;
-		}
-
-		ho->predictor_2 = 1;
-		if (p == p0
-		    && ccp_test(f->unit, p, CILEN_PREDICTOR_2, 1) <= 0) {
-		    newret = CONFREJ;
-		}
-		break;
-
-	    default:
-		newret = CONFREJ;
-	    }
-	}
-
-	if (newret == CONFNAK && dont_nak)
-	    newret = CONFREJ;
-	if (!(newret == CONFACK || (newret == CONFNAK && ret == CONFREJ))) {
-	    /* we're returning this option */
-	    if (newret == CONFREJ && ret == CONFNAK)
-		retp = p0;
-	    ret = newret;
-	    if (p != retp)
-		BCOPY(p, retp, clen);
-	    retp += clen;
-	}
-
-	p += clen;
-	len -= clen;
-    }
-
-    if (ret != CONFACK) {
-	if (ret == CONFREJ && *lenp == retp - p0)
-	    all_rejected[f->unit] = 1;
-	else
-	    *lenp = retp - p0;
-    }
-    return ret;
-}
-
-/*
- * Make a string name for a compression method (or 2).
- */
-static char *
-method_name(opt, opt2)
-    ccp_options *opt, *opt2;
-{
-    static char result[64];
-
-    if (!ANY_COMPRESS(*opt))
-	return "(none)";
-    switch (opt->method) {
-    case CI_DEFLATE:
-    case CI_DEFLATE_DRAFT:
-	if (opt2 != NULL && opt2->deflate_size != opt->deflate_size)
-	    slprintf(result, sizeof(result), "Deflate%s (%d/%d)",
-		     (opt->method == CI_DEFLATE_DRAFT? "(old#)": ""),
-		     opt->deflate_size, opt2->deflate_size);
-	else
-	    slprintf(result, sizeof(result), "Deflate%s (%d)",
-		     (opt->method == CI_DEFLATE_DRAFT? "(old#)": ""),
-		     opt->deflate_size);
-	break;
-    case CI_BSD_COMPRESS:
-	if (opt2 != NULL && opt2->bsd_bits != opt->bsd_bits)
-	    slprintf(result, sizeof(result), "BSD-Compress (%d/%d)",
-		     opt->bsd_bits, opt2->bsd_bits);
-	else
-	    slprintf(result, sizeof(result), "BSD-Compress (%d)",
-		     opt->bsd_bits);
-	break;
-    case CI_PREDICTOR_1:
-	return "Predictor 1";
-    case CI_PREDICTOR_2:
-	return "Predictor 2";
-    default:
-	slprintf(result, sizeof(result), "Method %d", opt->method);
-    }
-    return result;
-}
-
-/*
- * CCP has come up - inform the kernel driver and log a message.
- */
-static void
-ccp_up(f)
-    fsm *f;
-{
-    ccp_options *go = &ccp_gotoptions[f->unit];
-    ccp_options *ho = &ccp_hisoptions[f->unit];
-    char method1[64];
-
-    ccp_flags_set(f->unit, 1, 1);
-    if (ANY_COMPRESS(*go)) {
-	if (ANY_COMPRESS(*ho)) {
-	    if (go->method == ho->method) {
-		notice("%s compression enabled", method_name(go, ho));
-	    } else {
-		strlcpy(method1, method_name(go, NULL), sizeof(method1));
-		notice("%s / %s compression enabled",
-		       method1, method_name(ho, NULL));
-	    }
-	} else
-	    notice("%s receive compression enabled", method_name(go, NULL));
-    } else if (ANY_COMPRESS(*ho))
-	notice("%s transmit compression enabled", method_name(ho, NULL));
-}
-
-/*
- * CCP has gone down - inform the kernel driver.
- */
-static void
-ccp_down(f)
-    fsm *f;
-{
-    if (ccp_localstate[f->unit] & RACK_PENDING)
-	UNTIMEOUT(ccp_rack_timeout, f);
-    ccp_localstate[f->unit] = 0;
-    ccp_flags_set(f->unit, 1, 0);
-}
-
-/*
- * Print the contents of a CCP packet.
- */
-static char *ccp_codenames[] = {
-    "ConfReq", "ConfAck", "ConfNak", "ConfRej",
-    "TermReq", "TermAck", "CodeRej",
-    NULL, NULL, NULL, NULL, NULL, NULL,
-    "ResetReq", "ResetAck",
-};
-
-static int
-ccp_printpkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    u_char *p0, *optend;
-    int code, id, len;
-    int optlen;
-
-    p0 = p;
-    if (plen < HEADERLEN)
-	return 0;
-    code = p[0];
-    id = p[1];
-    len = (p[2] << 8) + p[3];
-    if (len < HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(ccp_codenames) / sizeof(char *)
-	&& ccp_codenames[code-1] != NULL)
-	printer(arg, " %s", ccp_codenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code);
-    printer(arg, " id=0x%x", id);
-    len -= HEADERLEN;
-    p += HEADERLEN;
-
-    switch (code) {
-    case CONFREQ:
-    case CONFACK:
-    case CONFNAK:
-    case CONFREJ:
-	/* print list of possible compression methods */
-	while (len >= 2) {
-	    code = p[0];
-	    optlen = p[1];
-	    if (optlen < 2 || optlen > len)
-		break;
-	    printer(arg, " <");
-	    len -= optlen;
-	    optend = p + optlen;
-	    switch (code) {
-	    case CI_DEFLATE:
-	    case CI_DEFLATE_DRAFT:
-		if (optlen >= CILEN_DEFLATE) {
-		    printer(arg, "deflate%s %d",
-			    (code == CI_DEFLATE_DRAFT? "(old#)": ""),
-			    DEFLATE_SIZE(p[2]));
-		    if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL)
-			printer(arg, " method %d", DEFLATE_METHOD(p[2]));
-		    if (p[3] != DEFLATE_CHK_SEQUENCE)
-			printer(arg, " check %d", p[3]);
-		    p += CILEN_DEFLATE;
-		}
-		break;
-	    case CI_BSD_COMPRESS:
-		if (optlen >= CILEN_BSD_COMPRESS) {
-		    printer(arg, "bsd v%d %d", BSD_VERSION(p[2]),
-			    BSD_NBITS(p[2]));
-		    p += CILEN_BSD_COMPRESS;
-		}
-		break;
-	    case CI_PREDICTOR_1:
-		if (optlen >= CILEN_PREDICTOR_1) {
-		    printer(arg, "predictor 1");
-		    p += CILEN_PREDICTOR_1;
-		}
-		break;
-	    case CI_PREDICTOR_2:
-		if (optlen >= CILEN_PREDICTOR_2) {
-		    printer(arg, "predictor 2");
-		    p += CILEN_PREDICTOR_2;
-		}
-		break;
-	    }
-	    while (p < optend)
-		printer(arg, " %.2x", *p++);
-	    printer(arg, ">");
-	}
-	break;
-
-    case TERMACK:
-    case TERMREQ:
-	if (len > 0 && *p >= ' ' && *p < 0x7f) {
-	    print_string((char *)p, len, printer, arg);
-	    p += len;
-	    len = 0;
-	}
-	break;
-    }
-
-    /* dump out the rest of the packet in hex */
-    while (--len >= 0)
-	printer(arg, " %.2x", *p++);
-
-    return p - p0;
-}
-
-/*
- * We have received a packet that the decompressor failed to
- * decompress.  Here we would expect to issue a reset-request, but
- * Motorola has a patent on resetting the compressor as a result of
- * detecting an error in the decompressed data after decompression.
- * (See US patent 5,130,993; international patent publication number
- * WO 91/10289; Australian patent 73296/91.)
- *
- * So we ask the kernel whether the error was detected after
- * decompression; if it was, we take CCP down, thus disabling
- * compression :-(, otherwise we issue the reset-request.
- */
-static void
-ccp_datainput(unit, pkt, len)
-    int unit;
-    u_char *pkt;
-    int len;
-{
-    fsm *f;
-
-    f = &ccp_fsm[unit];
-    if (f->state == OPENED) {
-	if (ccp_fatal_error(unit)) {
-	    /*
-	     * Disable compression by taking CCP down.
-	     */
-	    error("Lost compression sync: disabling compression");
-	    ccp_close(unit, "Lost compression sync");
-	} else {
-	    /*
-	     * Send a reset-request to reset the peer's compressor.
-	     * We don't do that if we are still waiting for an
-	     * acknowledgement to a previous reset-request.
-	     */
-	    if (!(ccp_localstate[f->unit] & RACK_PENDING)) {
-		fsm_sdata(f, CCP_RESETREQ, f->reqid = ++f->id, NULL, 0);
-		TIMEOUT(ccp_rack_timeout, f, RACKTIMEOUT);
-		ccp_localstate[f->unit] |= RACK_PENDING;
-	    } else
-		ccp_localstate[f->unit] |= RREQ_REPEAT;
-	}
-    }
-}
-
-/*
- * Timeout waiting for reset-ack.
- */
-static void
-ccp_rack_timeout(arg)
-    void *arg;
-{
-    fsm *f = arg;
-
-    if (f->state == OPENED && ccp_localstate[f->unit] & RREQ_REPEAT) {
-	fsm_sdata(f, CCP_RESETREQ, f->reqid, NULL, 0);
-	TIMEOUT(ccp_rack_timeout, f, RACKTIMEOUT);
-	ccp_localstate[f->unit] &= ~RREQ_REPEAT;
-    } else
-	ccp_localstate[f->unit] &= ~RACK_PENDING;
-}
-
diff --git a/mdk-stage1/ppp/pppd/ccp.h b/mdk-stage1/ppp/pppd/ccp.h
deleted file mode 100644
index 609d858c5..000000000
--- a/mdk-stage1/ppp/pppd/ccp.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * ccp.h - Definitions for PPP Compression Control Protocol.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-typedef struct ccp_options {
-    bool bsd_compress;		/* do BSD Compress? */
-    bool deflate;		/* do Deflate? */
-    bool predictor_1;		/* do Predictor-1? */
-    bool predictor_2;		/* do Predictor-2? */
-    bool deflate_correct;	/* use correct code for deflate? */
-    bool deflate_draft;		/* use draft RFC code for deflate? */
-    u_short bsd_bits;		/* # bits/code for BSD Compress */
-    u_short deflate_size;	/* lg(window size) for Deflate */
-    short method;		/* code for chosen compression method */
-} ccp_options;
-
-extern fsm ccp_fsm[];
-extern ccp_options ccp_wantoptions[];
-extern ccp_options ccp_gotoptions[];
-extern ccp_options ccp_allowoptions[];
-extern ccp_options ccp_hisoptions[];
-
-extern struct protent ccp_protent;
diff --git a/mdk-stage1/ppp/pppd/chap.c b/mdk-stage1/ppp/pppd/chap.c
deleted file mode 100644
index 54c0e0095..000000000
--- a/mdk-stage1/ppp/pppd/chap.c
+++ /dev/null
@@ -1,860 +0,0 @@
-/*
- * chap.c - Challenge Handshake Authentication Protocol.
- *
- * Copyright (c) 1993 The Australian National University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the Australian National University.  The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Copyright (c) 1991 Gregory M. Christy.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Gregory M. Christy.  The name of the author may not be used to
- * endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-/*
- * TODO:
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/time.h>
-
-#include "pppd.h"
-#include "chap.h"
-#include "md5.h"
-#ifdef CHAPMS
-#include "chap_ms.h"
-#endif
-
-static const char rcsid[] = RCSID;
-
-/*
- * Command-line options.
- */
-static option_t chap_option_list[] = {
-    { "chap-restart", o_int, &chap[0].timeouttime,
-      "Set timeout for CHAP", OPT_PRIO },
-    { "chap-max-challenge", o_int, &chap[0].max_transmits,
-      "Set max #xmits for challenge", OPT_PRIO },
-    { "chap-interval", o_int, &chap[0].chal_interval,
-      "Set interval for rechallenge", OPT_PRIO },
-#ifdef MSLANMAN
-    { "ms-lanman", o_bool, &ms_lanman,
-      "Use LanMan passwd when using MS-CHAP", 1 },
-#endif
-    { NULL }
-};
-
-/*
- * Protocol entry points.
- */
-static void ChapInit __P((int));
-static void ChapLowerUp __P((int));
-static void ChapLowerDown __P((int));
-static void ChapInput __P((int, u_char *, int));
-static void ChapProtocolReject __P((int));
-static int  ChapPrintPkt __P((u_char *, int,
-			      void (*) __P((void *, char *, ...)), void *));
-
-struct protent chap_protent = {
-    PPP_CHAP,
-    ChapInit,
-    ChapInput,
-    ChapProtocolReject,
-    ChapLowerUp,
-    ChapLowerDown,
-    NULL,
-    NULL,
-    ChapPrintPkt,
-    NULL,
-    1,
-    "CHAP",
-    NULL,
-    chap_option_list,
-    NULL,
-    NULL,
-    NULL
-};
-
-chap_state chap[NUM_PPP];		/* CHAP state; one for each unit */
-
-static void ChapChallengeTimeout __P((void *));
-static void ChapResponseTimeout __P((void *));
-static void ChapReceiveChallenge __P((chap_state *, u_char *, int, int));
-static void ChapRechallenge __P((void *));
-static void ChapReceiveResponse __P((chap_state *, u_char *, int, int));
-static void ChapReceiveSuccess __P((chap_state *, u_char *, int, int));
-static void ChapReceiveFailure __P((chap_state *, u_char *, int, int));
-static void ChapSendStatus __P((chap_state *, int));
-static void ChapSendChallenge __P((chap_state *));
-static void ChapSendResponse __P((chap_state *));
-static void ChapGenChallenge __P((chap_state *));
-
-extern double drand48 __P((void));
-extern void srand48 __P((long));
-
-/*
- * ChapInit - Initialize a CHAP unit.
- */
-static void
-ChapInit(unit)
-    int unit;
-{
-    chap_state *cstate = &chap[unit];
-
-    BZERO(cstate, sizeof(*cstate));
-    cstate->unit = unit;
-    cstate->clientstate = CHAPCS_INITIAL;
-    cstate->serverstate = CHAPSS_INITIAL;
-    cstate->timeouttime = CHAP_DEFTIMEOUT;
-    cstate->max_transmits = CHAP_DEFTRANSMITS;
-    /* random number generator is initialized in magic_init */
-}
-
-
-/*
- * ChapAuthWithPeer - Authenticate us with our peer (start client).
- *
- */
-void
-ChapAuthWithPeer(unit, our_name, digest)
-    int unit;
-    char *our_name;
-    int digest;
-{
-    chap_state *cstate = &chap[unit];
-
-    cstate->resp_name = our_name;
-    cstate->resp_type = digest;
-
-    if (cstate->clientstate == CHAPCS_INITIAL ||
-	cstate->clientstate == CHAPCS_PENDING) {
-	/* lower layer isn't up - wait until later */
-	cstate->clientstate = CHAPCS_PENDING;
-	return;
-    }
-
-    /*
-     * We get here as a result of LCP coming up.
-     * So even if CHAP was open before, we will 
-     * have to re-authenticate ourselves.
-     */
-    cstate->clientstate = CHAPCS_LISTEN;
-}
-
-
-/*
- * ChapAuthPeer - Authenticate our peer (start server).
- */
-void
-ChapAuthPeer(unit, our_name, digest)
-    int unit;
-    char *our_name;
-    int digest;
-{
-    chap_state *cstate = &chap[unit];
-  
-    cstate->chal_name = our_name;
-    cstate->chal_type = digest;
-
-    if (cstate->serverstate == CHAPSS_INITIAL ||
-	cstate->serverstate == CHAPSS_PENDING) {
-	/* lower layer isn't up - wait until later */
-	cstate->serverstate = CHAPSS_PENDING;
-	return;
-    }
-
-    ChapGenChallenge(cstate);
-    ChapSendChallenge(cstate);		/* crank it up dude! */
-    cstate->serverstate = CHAPSS_INITIAL_CHAL;
-}
-
-
-/*
- * ChapChallengeTimeout - Timeout expired on sending challenge.
- */
-static void
-ChapChallengeTimeout(arg)
-    void *arg;
-{
-    chap_state *cstate = (chap_state *) arg;
-  
-    /* if we aren't sending challenges, don't worry.  then again we */
-    /* probably shouldn't be here either */
-    if (cstate->serverstate != CHAPSS_INITIAL_CHAL &&
-	cstate->serverstate != CHAPSS_RECHALLENGE)
-	return;
-
-    if (cstate->chal_transmits >= cstate->max_transmits) {
-	/* give up on peer */
-	error("Peer failed to respond to CHAP challenge");
-	cstate->serverstate = CHAPSS_BADAUTH;
-	auth_peer_fail(cstate->unit, PPP_CHAP);
-	return;
-    }
-
-    ChapSendChallenge(cstate);		/* Re-send challenge */
-}
-
-
-/*
- * ChapResponseTimeout - Timeout expired on sending response.
- */
-static void
-ChapResponseTimeout(arg)
-    void *arg;
-{
-    chap_state *cstate = (chap_state *) arg;
-
-    /* if we aren't sending a response, don't worry. */
-    if (cstate->clientstate != CHAPCS_RESPONSE)
-	return;
-
-    ChapSendResponse(cstate);		/* re-send response */
-}
-
-
-/*
- * ChapRechallenge - Time to challenge the peer again.
- */
-static void
-ChapRechallenge(arg)
-    void *arg;
-{
-    chap_state *cstate = (chap_state *) arg;
-
-    /* if we aren't sending a response, don't worry. */
-    if (cstate->serverstate != CHAPSS_OPEN)
-	return;
-
-    ChapGenChallenge(cstate);
-    ChapSendChallenge(cstate);
-    cstate->serverstate = CHAPSS_RECHALLENGE;
-}
-
-
-/*
- * ChapLowerUp - The lower layer is up.
- *
- * Start up if we have pending requests.
- */
-static void
-ChapLowerUp(unit)
-    int unit;
-{
-    chap_state *cstate = &chap[unit];
-  
-    if (cstate->clientstate == CHAPCS_INITIAL)
-	cstate->clientstate = CHAPCS_CLOSED;
-    else if (cstate->clientstate == CHAPCS_PENDING)
-	cstate->clientstate = CHAPCS_LISTEN;
-
-    if (cstate->serverstate == CHAPSS_INITIAL)
-	cstate->serverstate = CHAPSS_CLOSED;
-    else if (cstate->serverstate == CHAPSS_PENDING) {
-	ChapGenChallenge(cstate);
-	ChapSendChallenge(cstate);
-	cstate->serverstate = CHAPSS_INITIAL_CHAL;
-    }
-}
-
-
-/*
- * ChapLowerDown - The lower layer is down.
- *
- * Cancel all timeouts.
- */
-static void
-ChapLowerDown(unit)
-    int unit;
-{
-    chap_state *cstate = &chap[unit];
-  
-    /* Timeout(s) pending?  Cancel if so. */
-    if (cstate->serverstate == CHAPSS_INITIAL_CHAL ||
-	cstate->serverstate == CHAPSS_RECHALLENGE)
-	UNTIMEOUT(ChapChallengeTimeout, cstate);
-    else if (cstate->serverstate == CHAPSS_OPEN
-	     && cstate->chal_interval != 0)
-	UNTIMEOUT(ChapRechallenge, cstate);
-    if (cstate->clientstate == CHAPCS_RESPONSE)
-	UNTIMEOUT(ChapResponseTimeout, cstate);
-
-    cstate->clientstate = CHAPCS_INITIAL;
-    cstate->serverstate = CHAPSS_INITIAL;
-}
-
-
-/*
- * ChapProtocolReject - Peer doesn't grok CHAP.
- */
-static void
-ChapProtocolReject(unit)
-    int unit;
-{
-    chap_state *cstate = &chap[unit];
-
-    if (cstate->serverstate != CHAPSS_INITIAL &&
-	cstate->serverstate != CHAPSS_CLOSED)
-	auth_peer_fail(unit, PPP_CHAP);
-    if (cstate->clientstate != CHAPCS_INITIAL &&
-	cstate->clientstate != CHAPCS_CLOSED)
-	auth_withpeer_fail(unit, PPP_CHAP);
-    ChapLowerDown(unit);		/* shutdown chap */
-}
-
-
-/*
- * ChapInput - Input CHAP packet.
- */
-static void
-ChapInput(unit, inpacket, packet_len)
-    int unit;
-    u_char *inpacket;
-    int packet_len;
-{
-    chap_state *cstate = &chap[unit];
-    u_char *inp;
-    u_char code, id;
-    int len;
-  
-    /*
-     * Parse header (code, id and length).
-     * If packet too short, drop it.
-     */
-    inp = inpacket;
-    if (packet_len < CHAP_HEADERLEN) {
-	CHAPDEBUG(("ChapInput: rcvd short header."));
-	return;
-    }
-    GETCHAR(code, inp);
-    GETCHAR(id, inp);
-    GETSHORT(len, inp);
-    if (len < CHAP_HEADERLEN) {
-	CHAPDEBUG(("ChapInput: rcvd illegal length."));
-	return;
-    }
-    if (len > packet_len) {
-	CHAPDEBUG(("ChapInput: rcvd short packet."));
-	return;
-    }
-    len -= CHAP_HEADERLEN;
-  
-    /*
-     * Action depends on code (as in fact it usually does :-).
-     */
-    switch (code) {
-    case CHAP_CHALLENGE:
-	ChapReceiveChallenge(cstate, inp, id, len);
-	break;
-    
-    case CHAP_RESPONSE:
-	ChapReceiveResponse(cstate, inp, id, len);
-	break;
-    
-    case CHAP_FAILURE:
-	ChapReceiveFailure(cstate, inp, id, len);
-	break;
-
-    case CHAP_SUCCESS:
-	ChapReceiveSuccess(cstate, inp, id, len);
-	break;
-
-    default:				/* Need code reject? */
-	warn("Unknown CHAP code (%d) received.", code);
-	break;
-    }
-}
-
-
-/*
- * ChapReceiveChallenge - Receive Challenge and send Response.
- */
-static void
-ChapReceiveChallenge(cstate, inp, id, len)
-    chap_state *cstate;
-    u_char *inp;
-    int id;
-    int len;
-{
-    int rchallenge_len;
-    u_char *rchallenge;
-    int secret_len;
-    char secret[MAXSECRETLEN];
-    char rhostname[256];
-    MD5_CTX mdContext;
-    u_char hash[MD5_SIGNATURE_SIZE];
- 
-    if (cstate->clientstate == CHAPCS_CLOSED ||
-	cstate->clientstate == CHAPCS_PENDING) {
-	CHAPDEBUG(("ChapReceiveChallenge: in state %d", cstate->clientstate));
-	return;
-    }
-
-    if (len < 2) {
-	CHAPDEBUG(("ChapReceiveChallenge: rcvd short packet."));
-	return;
-    }
-
-    GETCHAR(rchallenge_len, inp);
-    len -= sizeof (u_char) + rchallenge_len;	/* now name field length */
-    if (len < 0) {
-	CHAPDEBUG(("ChapReceiveChallenge: rcvd short packet."));
-	return;
-    }
-    rchallenge = inp;
-    INCPTR(rchallenge_len, inp);
-
-    if (len >= sizeof(rhostname))
-	len = sizeof(rhostname) - 1;
-    BCOPY(inp, rhostname, len);
-    rhostname[len] = '\000';
-
-    /* Microsoft doesn't send their name back in the PPP packet */
-    if (explicit_remote || (remote_name[0] != 0 && rhostname[0] == 0)) {
-	strlcpy(rhostname, remote_name, sizeof(rhostname));
-	CHAPDEBUG(("ChapReceiveChallenge: using '%q' as remote name",
-		   rhostname));
-    }
-
-    /* get secret for authenticating ourselves with the specified host */
-    if (!get_secret(cstate->unit, cstate->resp_name, rhostname,
-		    secret, &secret_len, 0)) {
-	secret_len = 0;		/* assume null secret if can't find one */
-	warn("No CHAP secret found for authenticating us to %q", rhostname);
-    }
-
-    /* cancel response send timeout if necessary */
-    if (cstate->clientstate == CHAPCS_RESPONSE)
-	UNTIMEOUT(ChapResponseTimeout, cstate);
-
-    cstate->resp_id = id;
-    cstate->resp_transmits = 0;
-
-    /*  generate MD based on negotiated type */
-    switch (cstate->resp_type) { 
-
-    case CHAP_DIGEST_MD5:
-	MD5Init(&mdContext);
-	MD5Update(&mdContext, &cstate->resp_id, 1);
-	MD5Update(&mdContext, secret, secret_len);
-	MD5Update(&mdContext, rchallenge, rchallenge_len);
-	MD5Final(hash, &mdContext);
-	BCOPY(hash, cstate->response, MD5_SIGNATURE_SIZE);
-	cstate->resp_length = MD5_SIGNATURE_SIZE;
-	break;
-
-#ifdef CHAPMS
-    case CHAP_MICROSOFT:
-	ChapMS(cstate, rchallenge, rchallenge_len, secret, secret_len);
-	break;
-#endif
-
-    default:
-	CHAPDEBUG(("unknown digest type %d", cstate->resp_type));
-	return;
-    }
-
-    BZERO(secret, sizeof(secret));
-    ChapSendResponse(cstate);
-}
-
-
-/*
- * ChapReceiveResponse - Receive and process response.
- */
-static void
-ChapReceiveResponse(cstate, inp, id, len)
-    chap_state *cstate;
-    u_char *inp;
-    int id;
-    int len;
-{
-    u_char *remmd, remmd_len;
-    int secret_len, old_state;
-    int code;
-    char rhostname[256];
-    MD5_CTX mdContext;
-    char secret[MAXSECRETLEN];
-    u_char hash[MD5_SIGNATURE_SIZE];
-
-    if (cstate->serverstate == CHAPSS_CLOSED ||
-	cstate->serverstate == CHAPSS_PENDING) {
-	CHAPDEBUG(("ChapReceiveResponse: in state %d", cstate->serverstate));
-	return;
-    }
-
-    if (id != cstate->chal_id)
-	return;			/* doesn't match ID of last challenge */
-
-    /*
-     * If we have received a duplicate or bogus Response,
-     * we have to send the same answer (Success/Failure)
-     * as we did for the first Response we saw.
-     */
-    if (cstate->serverstate == CHAPSS_OPEN) {
-	ChapSendStatus(cstate, CHAP_SUCCESS);
-	return;
-    }
-    if (cstate->serverstate == CHAPSS_BADAUTH) {
-	ChapSendStatus(cstate, CHAP_FAILURE);
-	return;
-    }
-
-    if (len < 2) {
-	CHAPDEBUG(("ChapReceiveResponse: rcvd short packet."));
-	return;
-    }
-    GETCHAR(remmd_len, inp);		/* get length of MD */
-    remmd = inp;			/* get pointer to MD */
-    INCPTR(remmd_len, inp);
-
-    len -= sizeof (u_char) + remmd_len;
-    if (len < 0) {
-	CHAPDEBUG(("ChapReceiveResponse: rcvd short packet."));
-	return;
-    }
-
-    UNTIMEOUT(ChapChallengeTimeout, cstate);
-
-    if (len >= sizeof(rhostname))
-	len = sizeof(rhostname) - 1;
-    BCOPY(inp, rhostname, len);
-    rhostname[len] = '\000';
-
-    /*
-     * Get secret for authenticating them with us,
-     * do the hash ourselves, and compare the result.
-     */
-    code = CHAP_FAILURE;
-    if (!get_secret(cstate->unit, (explicit_remote? remote_name: rhostname),
-		    cstate->chal_name, secret, &secret_len, 1)) {
-	warn("No CHAP secret found for authenticating %q", rhostname);
-    } else {
-
-	/*  generate MD based on negotiated type */
-	switch (cstate->chal_type) { 
-
-	case CHAP_DIGEST_MD5:		/* only MD5 is defined for now */
-	    if (remmd_len != MD5_SIGNATURE_SIZE)
-		break;			/* it's not even the right length */
-	    MD5Init(&mdContext);
-	    MD5Update(&mdContext, &cstate->chal_id, 1);
-	    MD5Update(&mdContext, secret, secret_len);
-	    MD5Update(&mdContext, cstate->challenge, cstate->chal_len);
-	    MD5Final(hash, &mdContext); 
-
-	    /* compare local and remote MDs and send the appropriate status */
-	    if (memcmp (hash, remmd, MD5_SIGNATURE_SIZE) == 0)
-		code = CHAP_SUCCESS;	/* they are the same! */
-	    break;
-
-	default:
-	    CHAPDEBUG(("unknown digest type %d", cstate->chal_type));
-	}
-    }
-
-    BZERO(secret, sizeof(secret));
-    ChapSendStatus(cstate, code);
-
-    if (code == CHAP_SUCCESS) {
-	old_state = cstate->serverstate;
-	cstate->serverstate = CHAPSS_OPEN;
-	if (old_state == CHAPSS_INITIAL_CHAL) {
-	    auth_peer_success(cstate->unit, PPP_CHAP, rhostname, len);
-	}
-	if (cstate->chal_interval != 0)
-	    TIMEOUT(ChapRechallenge, cstate, cstate->chal_interval);
-	notice("CHAP peer authentication succeeded for %q", rhostname);
-
-    } else {
-	error("CHAP peer authentication failed for remote host %q", rhostname);
-	cstate->serverstate = CHAPSS_BADAUTH;
-	auth_peer_fail(cstate->unit, PPP_CHAP);
-    }
-}
-
-/*
- * ChapReceiveSuccess - Receive Success
- */
-static void
-ChapReceiveSuccess(cstate, inp, id, len)
-    chap_state *cstate;
-    u_char *inp;
-    u_char id;
-    int len;
-{
-
-    if (cstate->clientstate == CHAPCS_OPEN)
-	/* presumably an answer to a duplicate response */
-	return;
-
-    if (cstate->clientstate != CHAPCS_RESPONSE) {
-	/* don't know what this is */
-	CHAPDEBUG(("ChapReceiveSuccess: in state %d\n", cstate->clientstate));
-	return;
-    }
-
-    UNTIMEOUT(ChapResponseTimeout, cstate);
-
-    /*
-     * Print message.
-     */
-    if (len > 0)
-	PRINTMSG(inp, len);
-
-    cstate->clientstate = CHAPCS_OPEN;
-
-    auth_withpeer_success(cstate->unit, PPP_CHAP);
-}
-
-
-/*
- * ChapReceiveFailure - Receive failure.
- */
-static void
-ChapReceiveFailure(cstate, inp, id, len)
-    chap_state *cstate;
-    u_char *inp;
-    u_char id;
-    int len;
-{
-    if (cstate->clientstate != CHAPCS_RESPONSE) {
-	/* don't know what this is */
-	CHAPDEBUG(("ChapReceiveFailure: in state %d\n", cstate->clientstate));
-	return;
-    }
-
-    UNTIMEOUT(ChapResponseTimeout, cstate);
-
-    /*
-     * Print message.
-     */
-    if (len > 0)
-	PRINTMSG(inp, len);
-
-    error("CHAP authentication failed");
-    auth_withpeer_fail(cstate->unit, PPP_CHAP);
-}
-
-
-/*
- * ChapSendChallenge - Send an Authenticate challenge.
- */
-static void
-ChapSendChallenge(cstate)
-    chap_state *cstate;
-{
-    u_char *outp;
-    int chal_len, name_len;
-    int outlen;
-
-    chal_len = cstate->chal_len;
-    name_len = strlen(cstate->chal_name);
-    outlen = CHAP_HEADERLEN + sizeof (u_char) + chal_len + name_len;
-    outp = outpacket_buf;
-
-    MAKEHEADER(outp, PPP_CHAP);		/* paste in a CHAP header */
-
-    PUTCHAR(CHAP_CHALLENGE, outp);
-    PUTCHAR(cstate->chal_id, outp);
-    PUTSHORT(outlen, outp);
-
-    PUTCHAR(chal_len, outp);		/* put length of challenge */
-    BCOPY(cstate->challenge, outp, chal_len);
-    INCPTR(chal_len, outp);
-
-    BCOPY(cstate->chal_name, outp, name_len);	/* append hostname */
-
-    output(cstate->unit, outpacket_buf, outlen + PPP_HDRLEN);
-  
-    TIMEOUT(ChapChallengeTimeout, cstate, cstate->timeouttime);
-    ++cstate->chal_transmits;
-}
-
-
-/*
- * ChapSendStatus - Send a status response (ack or nak).
- */
-static void
-ChapSendStatus(cstate, code)
-    chap_state *cstate;
-    int code;
-{
-    u_char *outp;
-    int outlen, msglen;
-    char msg[256];
-
-    if (code == CHAP_SUCCESS)
-	slprintf(msg, sizeof(msg), "Welcome to %s.", hostname);
-    else
-	slprintf(msg, sizeof(msg), "I don't like you.  Go 'way.");
-    msglen = strlen(msg);
-
-    outlen = CHAP_HEADERLEN + msglen;
-    outp = outpacket_buf;
-
-    MAKEHEADER(outp, PPP_CHAP);	/* paste in a header */
-  
-    PUTCHAR(code, outp);
-    PUTCHAR(cstate->chal_id, outp);
-    PUTSHORT(outlen, outp);
-    BCOPY(msg, outp, msglen);
-    output(cstate->unit, outpacket_buf, outlen + PPP_HDRLEN);
-}
-
-/*
- * ChapGenChallenge is used to generate a pseudo-random challenge string of
- * a pseudo-random length between min_len and max_len.  The challenge
- * string and its length are stored in *cstate, and various other fields of
- * *cstate are initialized.
- */
-
-static void
-ChapGenChallenge(cstate)
-    chap_state *cstate;
-{
-    int chal_len;
-    u_char *ptr = cstate->challenge;
-    int i;
-
-    /* pick a random challenge length between MIN_CHALLENGE_LENGTH and 
-       MAX_CHALLENGE_LENGTH */  
-    chal_len =  (unsigned) ((drand48() *
-			     (MAX_CHALLENGE_LENGTH - MIN_CHALLENGE_LENGTH)) +
-			    MIN_CHALLENGE_LENGTH);
-    cstate->chal_len = chal_len;
-    cstate->chal_id = ++cstate->id;
-    cstate->chal_transmits = 0;
-
-    /* generate a random string */
-    for (i = 0; i < chal_len; i++)
-	*ptr++ = (char) (drand48() * 0xff);
-}
-
-/*
- * ChapSendResponse - send a response packet with values as specified
- * in *cstate.
- */
-/* ARGSUSED */
-static void
-ChapSendResponse(cstate)
-    chap_state *cstate;
-{
-    u_char *outp;
-    int outlen, md_len, name_len;
-
-    md_len = cstate->resp_length;
-    name_len = strlen(cstate->resp_name);
-    outlen = CHAP_HEADERLEN + sizeof (u_char) + md_len + name_len;
-    outp = outpacket_buf;
-
-    MAKEHEADER(outp, PPP_CHAP);
-
-    PUTCHAR(CHAP_RESPONSE, outp);	/* we are a response */
-    PUTCHAR(cstate->resp_id, outp);	/* copy id from challenge packet */
-    PUTSHORT(outlen, outp);		/* packet length */
-
-    PUTCHAR(md_len, outp);		/* length of MD */
-    BCOPY(cstate->response, outp, md_len);	/* copy MD to buffer */
-    INCPTR(md_len, outp);
-
-    BCOPY(cstate->resp_name, outp, name_len); /* append our name */
-
-    /* send the packet */
-    output(cstate->unit, outpacket_buf, outlen + PPP_HDRLEN);
-
-    cstate->clientstate = CHAPCS_RESPONSE;
-    TIMEOUT(ChapResponseTimeout, cstate, cstate->timeouttime);
-    ++cstate->resp_transmits;
-}
-
-/*
- * ChapPrintPkt - print the contents of a CHAP packet.
- */
-static char *ChapCodenames[] = {
-    "Challenge", "Response", "Success", "Failure"
-};
-
-static int
-ChapPrintPkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int code, id, len;
-    int clen, nlen;
-    u_char x;
-
-    if (plen < CHAP_HEADERLEN)
-	return 0;
-    GETCHAR(code, p);
-    GETCHAR(id, p);
-    GETSHORT(len, p);
-    if (len < CHAP_HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(ChapCodenames) / sizeof(char *))
-	printer(arg, " %s", ChapCodenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code);
-    printer(arg, " id=0x%x", id);
-    len -= CHAP_HEADERLEN;
-    switch (code) {
-    case CHAP_CHALLENGE:
-    case CHAP_RESPONSE:
-	if (len < 1)
-	    break;
-	clen = p[0];
-	if (len < clen + 1)
-	    break;
-	++p;
-	nlen = len - clen - 1;
-	printer(arg, " <");
-	for (; clen > 0; --clen) {
-	    GETCHAR(x, p);
-	    printer(arg, "%.2x", x);
-	}
-	printer(arg, ">, name = ");
-	print_string((char *)p, nlen, printer, arg);
-	break;
-    case CHAP_FAILURE:
-    case CHAP_SUCCESS:
-	printer(arg, " ");
-	print_string((char *)p, len, printer, arg);
-	break;
-    default:
-	for (clen = len; clen > 0; --clen) {
-	    GETCHAR(x, p);
-	    printer(arg, " %.2x", x);
-	}
-    }
-
-    return len + CHAP_HEADERLEN;
-}
diff --git a/mdk-stage1/ppp/pppd/chap.h b/mdk-stage1/ppp/pppd/chap.h
deleted file mode 100644
index 945d051d0..000000000
--- a/mdk-stage1/ppp/pppd/chap.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * chap.h - Challenge Handshake Authentication Protocol definitions.
- *
- * Copyright (c) 1993 The Australian National University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the Australian National University.  The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Copyright (c) 1991 Gregory M. Christy
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the author.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-#ifndef __CHAP_INCLUDE__
-
-/* Code + ID + length */
-#define CHAP_HEADERLEN		4
-
-/*
- * CHAP codes.
- */
-
-#define CHAP_DIGEST_MD5		5	/* use MD5 algorithm */
-#define MD5_SIGNATURE_SIZE	16	/* 16 bytes in a MD5 message digest */
-#define CHAP_MICROSOFT		0x80	/* use Microsoft-compatible alg. */
-#define MS_CHAP_RESPONSE_LEN	49	/* Response length for MS-CHAP */
-
-#define CHAP_CHALLENGE		1
-#define CHAP_RESPONSE		2
-#define CHAP_SUCCESS		3
-#define CHAP_FAILURE    	4
-
-/*
- *  Challenge lengths (for challenges we send) and other limits.
- */
-#define MIN_CHALLENGE_LENGTH	16
-#define MAX_CHALLENGE_LENGTH	24
-#define MAX_RESPONSE_LENGTH	64	/* sufficient for MD5 or MS-CHAP */
-
-/*
- * Each interface is described by a chap structure.
- */
-
-typedef struct chap_state {
-    int unit;			/* Interface unit number */
-    int clientstate;		/* Client state */
-    int serverstate;		/* Server state */
-    u_char challenge[MAX_CHALLENGE_LENGTH]; /* last challenge string sent */
-    u_char chal_len;		/* challenge length */
-    u_char chal_id;		/* ID of last challenge */
-    u_char chal_type;		/* hash algorithm for challenges */
-    u_char id;			/* Current id */
-    char *chal_name;		/* Our name to use with challenge */
-    int chal_interval;		/* Time until we challenge peer again */
-    int timeouttime;		/* Timeout time in seconds */
-    int max_transmits;		/* Maximum # of challenge transmissions */
-    int chal_transmits;		/* Number of transmissions of challenge */
-    int resp_transmits;		/* Number of transmissions of response */
-    u_char response[MAX_RESPONSE_LENGTH];	/* Response to send */
-    u_char resp_length;		/* length of response */
-    u_char resp_id;		/* ID for response messages */
-    u_char resp_type;		/* hash algorithm for responses */
-    char *resp_name;		/* Our name to send with response */
-} chap_state;
-
-
-/*
- * Client (peer) states.
- */
-#define CHAPCS_INITIAL		0	/* Lower layer down, not opened */
-#define CHAPCS_CLOSED		1	/* Lower layer up, not opened */
-#define CHAPCS_PENDING		2	/* Auth us to peer when lower up */
-#define CHAPCS_LISTEN		3	/* Listening for a challenge */
-#define CHAPCS_RESPONSE		4	/* Sent response, waiting for status */
-#define CHAPCS_OPEN		5	/* We've received Success */
-
-/*
- * Server (authenticator) states.
- */
-#define CHAPSS_INITIAL		0	/* Lower layer down, not opened */
-#define CHAPSS_CLOSED		1	/* Lower layer up, not opened */
-#define CHAPSS_PENDING		2	/* Auth peer when lower up */
-#define CHAPSS_INITIAL_CHAL	3	/* We've sent the first challenge */
-#define CHAPSS_OPEN		4	/* We've sent a Success msg */
-#define CHAPSS_RECHALLENGE	5	/* We've sent another challenge */
-#define CHAPSS_BADAUTH		6	/* We've sent a Failure msg */
-
-/*
- * Timeouts.
- */
-#define CHAP_DEFTIMEOUT		3	/* Timeout time in seconds */
-#define CHAP_DEFTRANSMITS	10	/* max # times to send challenge */
-
-extern chap_state chap[];
-
-void ChapAuthWithPeer __P((int, char *, int));
-void ChapAuthPeer __P((int, char *, int));
-
-extern struct protent chap_protent;
-
-#define __CHAP_INCLUDE__
-#endif /* __CHAP_INCLUDE__ */
diff --git a/mdk-stage1/ppp/pppd/chap_ms.c b/mdk-stage1/ppp/pppd/chap_ms.c
deleted file mode 100644
index 81a57bb5a..000000000
--- a/mdk-stage1/ppp/pppd/chap_ms.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- * chap_ms.c - Microsoft MS-CHAP compatible implementation.
- *
- * Copyright (c) 1995 Eric Rosenquist, Strata Software Limited.
- * http://www.strataware.com/
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Eric Rosenquist.  The name of the author may not be used to
- * endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
- * Modifications by Lauri Pesonen / lpesonen@clinet.fi, april 1997
- *
- *   Implemented LANManager type password response to MS-CHAP challenges.
- *   Now pppd provides both NT style and LANMan style blocks, and the
- *   prefered is set by option "ms-lanman". Default is to use NT.
- *   The hash text (StdText) was taken from Win95 RASAPI32.DLL.
- *
- *   You should also use DOMAIN\\USERNAME as described in README.MSCHAP80
- */
-
-#define RCSID	"$Id$"
-
-#ifdef CHAPMS
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <unistd.h>
-#ifdef HAVE_CRYPT_H
-#include <crypt.h>
-#endif
-
-#include "pppd.h"
-#include "chap.h"
-#include "chap_ms.h"
-#include "md4.h"
-
-#ifndef USE_CRYPT
-#include <des.h>
-#endif
-
-static const char rcsid[] = RCSID;
-
-typedef struct {
-    u_char LANManResp[24];
-    u_char NTResp[24];
-    u_char UseNT;		/* If 1, ignore the LANMan response field */
-} MS_ChapResponse;
-/* We use MS_CHAP_RESPONSE_LEN, rather than sizeof(MS_ChapResponse),
-   in case this struct gets padded. */
-
-
-static void	ChallengeResponse __P((u_char *, u_char *, u_char *));
-static void	DesEncrypt __P((u_char *, u_char *, u_char *));
-static void	MakeKey __P((u_char *, u_char *));
-static u_char	Get7Bits __P((u_char *, int));
-static void	ChapMS_NT __P((char *, int, char *, int, MS_ChapResponse *));
-#ifdef MSLANMAN
-static void	ChapMS_LANMan __P((char *, int, char *, int, MS_ChapResponse *));
-#endif
-
-#ifdef USE_CRYPT
-static void	Expand __P((u_char *, u_char *));
-static void	Collapse __P((u_char *, u_char *));
-#endif
-
-#ifdef MSLANMAN
-bool	ms_lanman = 0;    	/* Use LanMan password instead of NT */
-			  	/* Has meaning only with MS-CHAP challenges */
-#endif
-
-static void
-ChallengeResponse(challenge, pwHash, response)
-    u_char *challenge;	/* IN   8 octets */
-    u_char *pwHash;	/* IN  16 octets */
-    u_char *response;	/* OUT 24 octets */
-{
-    char    ZPasswordHash[21];
-
-    BZERO(ZPasswordHash, sizeof(ZPasswordHash));
-    BCOPY(pwHash, ZPasswordHash, MD4_SIGNATURE_SIZE);
-
-#if 0
-    dbglog("ChallengeResponse - ZPasswordHash %.*B",
-	   sizeof(ZPasswordHash), ZPasswordHash);
-#endif
-
-    DesEncrypt(challenge, ZPasswordHash +  0, response + 0);
-    DesEncrypt(challenge, ZPasswordHash +  7, response + 8);
-    DesEncrypt(challenge, ZPasswordHash + 14, response + 16);
-
-#if 0
-    dbglog("ChallengeResponse - response %.24B", response);
-#endif
-}
-
-
-#ifdef USE_CRYPT
-static void
-DesEncrypt(clear, key, cipher)
-    u_char *clear;	/* IN  8 octets */
-    u_char *key;	/* IN  7 octets */
-    u_char *cipher;	/* OUT 8 octets */
-{
-    u_char des_key[8];
-    u_char crypt_key[66];
-    u_char des_input[66];
-
-    MakeKey(key, des_key);
-
-    Expand(des_key, crypt_key);
-    setkey(crypt_key);
-
-#if 0
-    CHAPDEBUG((LOG_INFO, "DesEncrypt: 8 octet input : %.8B", clear));
-#endif
-
-    Expand(clear, des_input);
-    encrypt(des_input, 0);
-    Collapse(des_input, cipher);
-
-#if 0
-    CHAPDEBUG((LOG_INFO, "DesEncrypt: 8 octet output: %.8B", cipher));
-#endif
-}
-
-#else /* USE_CRYPT */
-
-static void
-DesEncrypt(clear, key, cipher)
-    u_char *clear;	/* IN  8 octets */
-    u_char *key;	/* IN  7 octets */
-    u_char *cipher;	/* OUT 8 octets */
-{
-    des_cblock		des_key;
-    des_key_schedule	key_schedule;
-
-    MakeKey(key, des_key);
-
-    des_set_key(&des_key, key_schedule);
-
-#if 0
-    CHAPDEBUG((LOG_INFO, "DesEncrypt: 8 octet input : %.8B", clear));
-#endif
-
-    des_ecb_encrypt((des_cblock *)clear, (des_cblock *)cipher, key_schedule, 1);
-
-#if 0
-    CHAPDEBUG((LOG_INFO, "DesEncrypt: 8 octet output: %.8B", cipher));
-#endif
-}
-
-#endif /* USE_CRYPT */
-
-
-static u_char Get7Bits(input, startBit)
-    u_char *input;
-    int startBit;
-{
-    register unsigned int	word;
-
-    word  = (unsigned)input[startBit / 8] << 8;
-    word |= (unsigned)input[startBit / 8 + 1];
-
-    word >>= 15 - (startBit % 8 + 7);
-
-    return word & 0xFE;
-}
-
-#ifdef USE_CRYPT
-
-/* in == 8-byte string (expanded version of the 56-bit key)
- * out == 64-byte string where each byte is either 1 or 0
- * Note that the low-order "bit" is always ignored by by setkey()
- */
-static void Expand(in, out)
-    u_char *in;
-    u_char *out;
-{
-        int j, c;
-        int i;
-
-        for(i = 0; i < 64; in++){
-		c = *in;
-                for(j = 7; j >= 0; j--)
-                        *out++ = (c >> j) & 01;
-                i += 8;
-        }
-}
-
-/* The inverse of Expand
- */
-static void Collapse(in, out)
-    u_char *in;
-    u_char *out;
-{
-        int j;
-        int i;
-	unsigned int c;
-
-	for (i = 0; i < 64; i += 8, out++) {
-	    c = 0;
-	    for (j = 7; j >= 0; j--, in++)
-		c |= *in << j;
-	    *out = c & 0xff;
-	}
-}
-#endif
-
-static void MakeKey(key, des_key)
-    u_char *key;	/* IN  56 bit DES key missing parity bits */
-    u_char *des_key;	/* OUT 64 bit DES key with parity bits added */
-{
-    des_key[0] = Get7Bits(key,  0);
-    des_key[1] = Get7Bits(key,  7);
-    des_key[2] = Get7Bits(key, 14);
-    des_key[3] = Get7Bits(key, 21);
-    des_key[4] = Get7Bits(key, 28);
-    des_key[5] = Get7Bits(key, 35);
-    des_key[6] = Get7Bits(key, 42);
-    des_key[7] = Get7Bits(key, 49);
-
-#ifndef USE_CRYPT
-    des_set_odd_parity((des_cblock *)des_key);
-#endif
-
-#if 0
-    CHAPDEBUG((LOG_INFO, "MakeKey: 56-bit input : %.7B", key));
-    CHAPDEBUG((LOG_INFO, "MakeKey: 64-bit output: %.8B", des_key));
-#endif
-}
-
-static void
-ChapMS_NT(rchallenge, rchallenge_len, secret, secret_len, response)
-    char *rchallenge;
-    int rchallenge_len;
-    char *secret;
-    int secret_len;
-    MS_ChapResponse    *response;
-{
-    int			i;
-#ifdef __NetBSD__
-    /* NetBSD uses the libc md4 routines which take bytes instead of bits */
-    int			mdlen = secret_len * 2;
-#else
-    int			mdlen = secret_len * 2 * 8;
-#endif
-    MD4_CTX		md4Context;
-    u_char		hash[MD4_SIGNATURE_SIZE];
-    u_char		unicodePassword[MAX_NT_PASSWORD * 2];
-
-    /* Initialize the Unicode version of the secret (== password). */
-    /* This implicitly supports 8-bit ISO8859/1 characters. */
-    BZERO(unicodePassword, sizeof(unicodePassword));
-    for (i = 0; i < secret_len; i++)
-	unicodePassword[i * 2] = (u_char)secret[i];
-
-    MD4Init(&md4Context);
-    MD4Update(&md4Context, unicodePassword, mdlen);
-
-    MD4Final(hash, &md4Context); 	/* Tell MD4 we're done */
-
-    ChallengeResponse(rchallenge, hash, response->NTResp);
-}
-
-#ifdef MSLANMAN
-static u_char *StdText = (u_char *)"KGS!@#$%"; /* key from rasapi32.dll */
-
-static void
-ChapMS_LANMan(rchallenge, rchallenge_len, secret, secret_len, response)
-    char *rchallenge;
-    int rchallenge_len;
-    char *secret;
-    int secret_len;
-    MS_ChapResponse	*response;
-{
-    int			i;
-    u_char		UcasePassword[MAX_NT_PASSWORD]; /* max is actually 14 */
-    u_char		PasswordHash[MD4_SIGNATURE_SIZE];
-
-    /* LANMan password is case insensitive */
-    BZERO(UcasePassword, sizeof(UcasePassword));
-    for (i = 0; i < secret_len; i++)
-       UcasePassword[i] = (u_char)toupper(secret[i]);
-    DesEncrypt( StdText, UcasePassword + 0, PasswordHash + 0 );
-    DesEncrypt( StdText, UcasePassword + 7, PasswordHash + 8 );
-    ChallengeResponse(rchallenge, PasswordHash, response->LANManResp);
-}
-#endif
-
-void
-ChapMS(cstate, rchallenge, rchallenge_len, secret, secret_len)
-    chap_state *cstate;
-    char *rchallenge;
-    int rchallenge_len;
-    char *secret;
-    int secret_len;
-{
-    MS_ChapResponse	response;
-
-#if 0
-    CHAPDEBUG((LOG_INFO, "ChapMS: secret is '%.*s'", secret_len, secret));
-#endif
-    BZERO(&response, sizeof(response));
-
-    /* Calculate both always */
-    ChapMS_NT(rchallenge, rchallenge_len, secret, secret_len, &response);
-
-#ifdef MSLANMAN
-    ChapMS_LANMan(rchallenge, rchallenge_len, secret, secret_len, &response);
-
-    /* prefered method is set by option  */
-    response.UseNT = !ms_lanman;
-#else
-    response.UseNT = 1;
-#endif
-
-    BCOPY(&response, cstate->response, MS_CHAP_RESPONSE_LEN);
-    cstate->resp_length = MS_CHAP_RESPONSE_LEN;
-}
-
-#endif /* CHAPMS */
diff --git a/mdk-stage1/ppp/pppd/chap_ms.h b/mdk-stage1/ppp/pppd/chap_ms.h
deleted file mode 100644
index fad2755c8..000000000
--- a/mdk-stage1/ppp/pppd/chap_ms.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * chap.h - Challenge Handshake Authentication Protocol definitions.
- *
- * Copyright (c) 1995 Eric Rosenquist, Strata Software Limited.
- * http://www.strataware.com/
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Eric Rosenquist.  The name of the author may not be used to
- * endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-#ifndef __CHAPMS_INCLUDE__
-
-#define MD4_SIGNATURE_SIZE	16	/* 16 bytes in a MD4 message digest */
-#define MAX_NT_PASSWORD	256	/* Maximum number of (Unicode) chars in an NT password */
-
-void ChapMS __P((chap_state *, char *, int, char *, int));
-
-#define __CHAPMS_INCLUDE__
-#endif /* __CHAPMS_INCLUDE__ */
diff --git a/mdk-stage1/ppp/pppd/demand.c b/mdk-stage1/ppp/pppd/demand.c
deleted file mode 100644
index 9a740be8d..000000000
--- a/mdk-stage1/ppp/pppd/demand.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * demand.c - Support routines for demand-dialling.
- *
- * Copyright (c) 1993 The Australian National University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the Australian National University.  The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <netdb.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#ifdef PPP_FILTER
-#include <net/if.h>
-#include <net/bpf.h>
-#include <pcap.h>
-#endif
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipcp.h"
-#include "lcp.h"
-
-static const char rcsid[] = RCSID;
-
-char *frame;
-int framelen;
-int framemax;
-int escape_flag;
-int flush_flag;
-int fcs;
-
-struct packet {
-    int length;
-    struct packet *next;
-    unsigned char data[1];
-};
-
-struct packet *pend_q;
-struct packet *pend_qtail;
-
-static int active_packet __P((unsigned char *, int));
-
-/*
- * demand_conf - configure the interface for doing dial-on-demand.
- */
-void
-demand_conf()
-{
-    int i;
-    struct protent *protp;
-
-/*    framemax = lcp_allowoptions[0].mru;
-    if (framemax < PPP_MRU) */
-	framemax = PPP_MRU;
-    framemax += PPP_HDRLEN + PPP_FCSLEN;
-    frame = malloc(framemax);
-    if (frame == NULL)
-	novm("demand frame");
-    framelen = 0;
-    pend_q = NULL;
-    escape_flag = 0;
-    flush_flag = 0;
-    fcs = PPP_INITFCS;
-
-    netif_set_mtu(0, MIN(lcp_allowoptions[0].mru, PPP_MRU));
-    ppp_send_config(0, PPP_MRU, (u_int32_t) 0, 0, 0);
-    ppp_recv_config(0, PPP_MRU, (u_int32_t) 0, 0, 0);
-
-#ifdef PPP_FILTER
-    set_filters(&pass_filter, &active_filter);
-#endif
-
-    /*
-     * Call the demand_conf procedure for each protocol that's got one.
-     */
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-	if (protp->enabled_flag && protp->demand_conf != NULL)
-	    if (!((*protp->demand_conf)(0)))
-		die(1);
-}
-
-
-/*
- * demand_block - set each network protocol to block further packets.
- */
-void
-demand_block()
-{
-    int i;
-    struct protent *protp;
-
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-	if (protp->enabled_flag && protp->demand_conf != NULL)
-	    sifnpmode(0, protp->protocol & ~0x8000, NPMODE_QUEUE);
-    get_loop_output();
-}
-
-/*
- * demand_discard - set each network protocol to discard packets
- * with an error.
- */
-void
-demand_discard()
-{
-    struct packet *pkt, *nextpkt;
-    int i;
-    struct protent *protp;
-
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-	if (protp->enabled_flag && protp->demand_conf != NULL)
-	    sifnpmode(0, protp->protocol & ~0x8000, NPMODE_ERROR);
-    get_loop_output();
-
-    /* discard all saved packets */
-    for (pkt = pend_q; pkt != NULL; pkt = nextpkt) {
-	nextpkt = pkt->next;
-	free(pkt);
-    }
-    pend_q = NULL;
-    framelen = 0;
-    flush_flag = 0;
-    escape_flag = 0;
-    fcs = PPP_INITFCS;
-}
-
-/*
- * demand_unblock - set each enabled network protocol to pass packets.
- */
-void
-demand_unblock()
-{
-    int i;
-    struct protent *protp;
-
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-	if (protp->enabled_flag && protp->demand_conf != NULL)
-	    sifnpmode(0, protp->protocol & ~0x8000, NPMODE_PASS);
-}
-
-/*
- * FCS lookup table as calculated by genfcstab.
- */
-static u_short fcstab[256] = {
-	0x0000,	0x1189,	0x2312,	0x329b,	0x4624,	0x57ad,	0x6536,	0x74bf,
-	0x8c48,	0x9dc1,	0xaf5a,	0xbed3,	0xca6c,	0xdbe5,	0xe97e,	0xf8f7,
-	0x1081,	0x0108,	0x3393,	0x221a,	0x56a5,	0x472c,	0x75b7,	0x643e,
-	0x9cc9,	0x8d40,	0xbfdb,	0xae52,	0xdaed,	0xcb64,	0xf9ff,	0xe876,
-	0x2102,	0x308b,	0x0210,	0x1399,	0x6726,	0x76af,	0x4434,	0x55bd,
-	0xad4a,	0xbcc3,	0x8e58,	0x9fd1,	0xeb6e,	0xfae7,	0xc87c,	0xd9f5,
-	0x3183,	0x200a,	0x1291,	0x0318,	0x77a7,	0x662e,	0x54b5,	0x453c,
-	0xbdcb,	0xac42,	0x9ed9,	0x8f50,	0xfbef,	0xea66,	0xd8fd,	0xc974,
-	0x4204,	0x538d,	0x6116,	0x709f,	0x0420,	0x15a9,	0x2732,	0x36bb,
-	0xce4c,	0xdfc5,	0xed5e,	0xfcd7,	0x8868,	0x99e1,	0xab7a,	0xbaf3,
-	0x5285,	0x430c,	0x7197,	0x601e,	0x14a1,	0x0528,	0x37b3,	0x263a,
-	0xdecd,	0xcf44,	0xfddf,	0xec56,	0x98e9,	0x8960,	0xbbfb,	0xaa72,
-	0x6306,	0x728f,	0x4014,	0x519d,	0x2522,	0x34ab,	0x0630,	0x17b9,
-	0xef4e,	0xfec7,	0xcc5c,	0xddd5,	0xa96a,	0xb8e3,	0x8a78,	0x9bf1,
-	0x7387,	0x620e,	0x5095,	0x411c,	0x35a3,	0x242a,	0x16b1,	0x0738,
-	0xffcf,	0xee46,	0xdcdd,	0xcd54,	0xb9eb,	0xa862,	0x9af9,	0x8b70,
-	0x8408,	0x9581,	0xa71a,	0xb693,	0xc22c,	0xd3a5,	0xe13e,	0xf0b7,
-	0x0840,	0x19c9,	0x2b52,	0x3adb,	0x4e64,	0x5fed,	0x6d76,	0x7cff,
-	0x9489,	0x8500,	0xb79b,	0xa612,	0xd2ad,	0xc324,	0xf1bf,	0xe036,
-	0x18c1,	0x0948,	0x3bd3,	0x2a5a,	0x5ee5,	0x4f6c,	0x7df7,	0x6c7e,
-	0xa50a,	0xb483,	0x8618,	0x9791,	0xe32e,	0xf2a7,	0xc03c,	0xd1b5,
-	0x2942,	0x38cb,	0x0a50,	0x1bd9,	0x6f66,	0x7eef,	0x4c74,	0x5dfd,
-	0xb58b,	0xa402,	0x9699,	0x8710,	0xf3af,	0xe226,	0xd0bd,	0xc134,
-	0x39c3,	0x284a,	0x1ad1,	0x0b58,	0x7fe7,	0x6e6e,	0x5cf5,	0x4d7c,
-	0xc60c,	0xd785,	0xe51e,	0xf497,	0x8028,	0x91a1,	0xa33a,	0xb2b3,
-	0x4a44,	0x5bcd,	0x6956,	0x78df,	0x0c60,	0x1de9,	0x2f72,	0x3efb,
-	0xd68d,	0xc704,	0xf59f,	0xe416,	0x90a9,	0x8120,	0xb3bb,	0xa232,
-	0x5ac5,	0x4b4c,	0x79d7,	0x685e,	0x1ce1,	0x0d68,	0x3ff3,	0x2e7a,
-	0xe70e,	0xf687,	0xc41c,	0xd595,	0xa12a,	0xb0a3,	0x8238,	0x93b1,
-	0x6b46,	0x7acf,	0x4854,	0x59dd,	0x2d62,	0x3ceb,	0x0e70,	0x1ff9,
-	0xf78f,	0xe606,	0xd49d,	0xc514,	0xb1ab,	0xa022,	0x92b9,	0x8330,
-	0x7bc7,	0x6a4e,	0x58d5,	0x495c,	0x3de3,	0x2c6a,	0x1ef1,	0x0f78
-};
-
-/*
- * loop_chars - process characters received from the loopback.
- * Calls loop_frame when a complete frame has been accumulated.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- */
-int
-loop_chars(p, n)
-    unsigned char *p;
-    int n;
-{
-    int c, rv;
-
-    rv = 0;
-    for (; n > 0; --n) {
-	c = *p++;
-	if (c == PPP_FLAG) {
-	    if (!escape_flag && !flush_flag
-		&& framelen > 2 && fcs == PPP_GOODFCS) {
-		framelen -= 2;
-		if (loop_frame((unsigned char *)frame, framelen))
-		    rv = 1;
-	    }
-	    framelen = 0;
-	    flush_flag = 0;
-	    escape_flag = 0;
-	    fcs = PPP_INITFCS;
-	    continue;
-	}
-	if (flush_flag)
-	    continue;
-	if (escape_flag) {
-	    c ^= PPP_TRANS;
-	    escape_flag = 0;
-	} else if (c == PPP_ESCAPE) {
-	    escape_flag = 1;
-	    continue;
-	}
-	if (framelen >= framemax) {
-	    flush_flag = 1;
-	    continue;
-	}
-	frame[framelen++] = c;
-	fcs = PPP_FCS(fcs, c);
-    }
-    return rv;
-}
-
-/*
- * loop_frame - given a frame obtained from the loopback,
- * decide whether to bring up the link or not, and, if we want
- * to transmit this frame later, put it on the pending queue.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- * We assume that the kernel driver has already applied the
- * pass_filter, so we won't get packets it rejected.
- * We apply the active_filter to see if we want this packet to
- * bring up the link.
- */
-int
-loop_frame(frame, len)
-    unsigned char *frame;
-    int len;
-{
-    struct packet *pkt;
-
-    /* dbglog("from loop: %P", frame, len); */
-    if (len < PPP_HDRLEN)
-	return 0;
-    if ((PPP_PROTOCOL(frame) & 0x8000) != 0)
-	return 0;		/* shouldn't get any of these anyway */
-    if (!active_packet(frame, len))
-	return 0;
-
-    pkt = (struct packet *) malloc(sizeof(struct packet) + len);
-    if (pkt != NULL) {
-	pkt->length = len;
-	pkt->next = NULL;
-	memcpy(pkt->data, frame, len);
-	if (pend_q == NULL)
-	    pend_q = pkt;
-	else
-	    pend_qtail->next = pkt;
-	pend_qtail = pkt;
-    }
-    return 1;
-}
-
-/*
- * demand_rexmit - Resend all those frames which we got via the
- * loopback, now that the real serial link is up.
- */
-void
-demand_rexmit(proto)
-    int proto;
-{
-    struct packet *pkt, *prev, *nextpkt;
-
-    prev = NULL;
-    pkt = pend_q;
-    pend_q = NULL;
-    for (; pkt != NULL; pkt = nextpkt) {
-	nextpkt = pkt->next;
-	if (PPP_PROTOCOL(pkt->data) == proto) {
-	    output(0, pkt->data, pkt->length);
-	    free(pkt);
-	} else {
-	    if (prev == NULL)
-		pend_q = pkt;
-	    else
-		prev->next = pkt;
-	    prev = pkt;
-	}
-    }
-    pend_qtail = prev;
-    if (prev != NULL)
-	prev->next = NULL;
-}
-
-/*
- * Scan a packet to decide whether it is an "active" packet,
- * that is, whether it is worth bringing up the link for.
- */
-static int
-active_packet(p, len)
-    unsigned char *p;
-    int len;
-{
-    int proto, i;
-    struct protent *protp;
-
-    if (len < PPP_HDRLEN)
-	return 0;
-    proto = PPP_PROTOCOL(p);
-#ifdef PPP_FILTER
-    if (pass_filter.bf_len != 0
-	&& bpf_filter(pass_filter.bf_insns, p, len, len) == 0)
-	return 0;
-    if (active_filter.bf_len != 0
-	&& bpf_filter(active_filter.bf_insns, p, len, len) == 0)
-	return 0;
-#endif
-    for (i = 0; (protp = protocols[i]) != NULL; ++i) {
-	if (protp->protocol < 0xC000 && (protp->protocol & ~0x8000) == proto) {
-	    if (!protp->enabled_flag)
-		return 0;
-	    if (protp->active_pkt == NULL)
-		return 1;
-	    return (*protp->active_pkt)(p, len);
-	}
-    }
-    return 0;			/* not a supported protocol !!?? */
-}
diff --git a/mdk-stage1/ppp/pppd/eui64.c b/mdk-stage1/ppp/pppd/eui64.c
deleted file mode 100644
index 7f3176035..000000000
--- a/mdk-stage1/ppp/pppd/eui64.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
-    eui64.c - EUI64 routines for IPv6CP.
-    Copyright (C) 1999  Tommi Komulainen <Tommi.Komulainen@iki.fi>
-
-    Redistribution and use in source and binary forms are permitted
-    provided that the above copyright notice and this paragraph are
-    duplicated in all such forms and that any documentation,
-    advertising materials, and other materials related to such
-    distribution and use acknowledge that the software was developed
-    by Tommi Komulainen.  The name of the author may not be used
-    to endorse or promote products derived from this software without
-    specific prior written permission.
-    THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-    IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-    WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-
-    $Id$
-*/
-
-#define RCSID	"$Id$"
-
-#include "pppd.h"
-
-static const char rcsid[] = RCSID;
-
-/*
- * eui64_ntoa - Make an ascii representation of an interface identifier
- */
-char *
-eui64_ntoa(e)
-    eui64_t e;
-{
-    static char buf[32];
-
-    snprintf(buf, 32, "%02x%02x:%02x%02x:%02x%02x:%02x%02x",
-	     e.e8[0], e.e8[1], e.e8[2], e.e8[3], 
-	     e.e8[4], e.e8[5], e.e8[6], e.e8[7]);
-    return buf;
-}
diff --git a/mdk-stage1/ppp/pppd/eui64.h b/mdk-stage1/ppp/pppd/eui64.h
deleted file mode 100644
index ca4445345..000000000
--- a/mdk-stage1/ppp/pppd/eui64.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
-    eui64.h - EUI64 routines for IPv6CP.
-    Copyright (C) 1999  Tommi Komulainen <Tommi.Komulainen@iki.fi>
-
-    Redistribution and use in source and binary forms are permitted
-    provided that the above copyright notice and this paragraph are
-    duplicated in all such forms and that any documentation,
-    advertising materials, and other materials related to such
-    distribution and use acknowledge that the software was developed
-    by Tommi Komulainen.  The name of the author may not be used
-    to endorse or promote products derived from this software without
-    specific prior written permission.
-    THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-    IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-    WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-    
-    $Id$
-*/
-
-#ifndef __EUI64_H__
-#define __EUI64_H__
-
-#if !defined(INET6)
-#error	"this file should only be included when INET6 is defined"
-#endif /* not defined(INET6) */
-
-#if defined(SOL2)
-#include <netinet/in.h>
-
-typedef union {
-    uint8_t	e8[8];		/* lower 64-bit IPv6 address */
-    uint32_t	e32[2];		/* lower 64-bit IPv6 address */
-} eui64_t;
-
-/*
- * Declare the two below, since in.h only defines them when _KERNEL
- * is declared - which shouldn't be true when dealing with user-land programs
- */
-#define	s6_addr8	_S6_un._S6_u8
-#define	s6_addr32	_S6_un._S6_u32
-
-#else /* else if not defined(SOL2) */
-
-/*
- * TODO:
- *
- * Maybe this should be done by processing struct in6_addr directly...
- */
-typedef union
-{
-    u_int8_t e8[8];
-    u_int16_t e16[4];
-    u_int32_t e32[2];
-} eui64_t;
-
-#endif /* defined(SOL2) */
-
-#define eui64_iszero(e)		(((e).e32[0] | (e).e32[1]) == 0)
-#define eui64_equals(e, o)	(((e).e32[0] == (o).e32[0]) && \
-				((e).e32[1] == (o).e32[1]))
-#define eui64_zero(e)		(e).e32[0] = (e).e32[1] = 0;
-
-#define eui64_copy(s, d)	memcpy(&(d), &(s), sizeof(eui64_t))
-
-#define eui64_magic(e)		do {			\
-				(e).e32[0] = magic();	\
-				(e).e32[1] = magic();	\
-				(e).e8[0] &= ~2;	\
-				} while (0)
-#define eui64_magic_nz(x)	do {				\
-				eui64_magic(x);			\
-				} while (eui64_iszero(x))
-#define eui64_magic_ne(x, y)	do {				\
-				eui64_magic(x);			\
-				} while (eui64_equals(x, y))
-
-#define eui64_get(ll, cp)	do {				\
-				eui64_copy((*cp), (ll));	\
-				(cp) += sizeof(eui64_t);	\
-				} while (0)
-
-#define eui64_put(ll, cp)	do {				\
-				eui64_copy((ll), (*cp));	\
-				(cp) += sizeof(eui64_t);	\
-				} while (0)
-
-#define eui64_set32(e, l)	do {			\
-				(e).e32[0] = 0;		\
-				(e).e32[1] = htonl(l);	\
-				} while (0)
-#define eui64_setlo32(e, l)	eui64_set32(e, l)
-
-char *eui64_ntoa __P((eui64_t));	/* Returns ascii representation of id */
-
-#endif /* __EUI64_H__ */
-
diff --git a/mdk-stage1/ppp/pppd/fsm.c b/mdk-stage1/ppp/pppd/fsm.c
deleted file mode 100644
index 07a8c11f1..000000000
--- a/mdk-stage1/ppp/pppd/fsm.c
+++ /dev/null
@@ -1,762 +0,0 @@
-/*
- * fsm.c - {Link, IP} Control Protocol Finite State Machine.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-/*
- * TODO:
- * Randomize fsm id on link/init.
- * Deal with variable outgoing MTU.
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-
-#include "pppd.h"
-#include "fsm.h"
-
-static const char rcsid[] = RCSID;
-
-static void fsm_timeout __P((void *));
-static void fsm_rconfreq __P((fsm *, int, u_char *, int));
-static void fsm_rconfack __P((fsm *, int, u_char *, int));
-static void fsm_rconfnakrej __P((fsm *, int, int, u_char *, int));
-static void fsm_rtermreq __P((fsm *, int, u_char *, int));
-static void fsm_rtermack __P((fsm *));
-static void fsm_rcoderej __P((fsm *, u_char *, int));
-static void fsm_sconfreq __P((fsm *, int));
-
-#define PROTO_NAME(f)	((f)->callbacks->proto_name)
-
-int peer_mru[NUM_PPP];
-
-
-/*
- * fsm_init - Initialize fsm.
- *
- * Initialize fsm state.
- */
-void
-fsm_init(f)
-    fsm *f;
-{
-    f->state = INITIAL;
-    f->flags = 0;
-    f->id = 0;				/* XXX Start with random id? */
-    f->timeouttime = DEFTIMEOUT;
-    f->maxconfreqtransmits = DEFMAXCONFREQS;
-    f->maxtermtransmits = DEFMAXTERMREQS;
-    f->maxnakloops = DEFMAXNAKLOOPS;
-    f->term_reason_len = 0;
-}
-
-
-/*
- * fsm_lowerup - The lower layer is up.
- */
-void
-fsm_lowerup(f)
-    fsm *f;
-{
-    switch( f->state ){
-    case INITIAL:
-	f->state = CLOSED;
-	break;
-
-    case STARTING:
-	if( f->flags & OPT_SILENT )
-	    f->state = STOPPED;
-	else {
-	    /* Send an initial configure-request */
-	    fsm_sconfreq(f, 0);
-	    f->state = REQSENT;
-	}
-	break;
-
-    default:
-	FSMDEBUG(("%s: Up event in state %d!", PROTO_NAME(f), f->state));
-    }
-}
-
-
-/*
- * fsm_lowerdown - The lower layer is down.
- *
- * Cancel all timeouts and inform upper layers.
- */
-void
-fsm_lowerdown(f)
-    fsm *f;
-{
-    switch( f->state ){
-    case CLOSED:
-	f->state = INITIAL;
-	break;
-
-    case STOPPED:
-	f->state = STARTING;
-	if( f->callbacks->starting )
-	    (*f->callbacks->starting)(f);
-	break;
-
-    case CLOSING:
-	f->state = INITIAL;
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	break;
-
-    case STOPPING:
-    case REQSENT:
-    case ACKRCVD:
-    case ACKSENT:
-	f->state = STARTING;
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	break;
-
-    case OPENED:
-	if( f->callbacks->down )
-	    (*f->callbacks->down)(f);
-	f->state = STARTING;
-	break;
-
-    default:
-	FSMDEBUG(("%s: Down event in state %d!", PROTO_NAME(f), f->state));
-    }
-}
-
-
-/*
- * fsm_open - Link is allowed to come up.
- */
-void
-fsm_open(f)
-    fsm *f;
-{
-    switch( f->state ){
-    case INITIAL:
-	f->state = STARTING;
-	if( f->callbacks->starting )
-	    (*f->callbacks->starting)(f);
-	break;
-
-    case CLOSED:
-	if( f->flags & OPT_SILENT )
-	    f->state = STOPPED;
-	else {
-	    /* Send an initial configure-request */
-	    fsm_sconfreq(f, 0);
-	    f->state = REQSENT;
-	}
-	break;
-
-    case CLOSING:
-	f->state = STOPPING;
-	/* fall through */
-    case STOPPED:
-    case OPENED:
-	if( f->flags & OPT_RESTART ){
-	    fsm_lowerdown(f);
-	    fsm_lowerup(f);
-	}
-	break;
-    }
-}
-
-
-/*
- * fsm_close - Start closing connection.
- *
- * Cancel timeouts and either initiate close or possibly go directly to
- * the CLOSED state.
- */
-void
-fsm_close(f, reason)
-    fsm *f;
-    char *reason;
-{
-    f->term_reason = reason;
-    f->term_reason_len = (reason == NULL? 0: strlen(reason));
-    switch( f->state ){
-    case STARTING:
-	f->state = INITIAL;
-	break;
-    case STOPPED:
-	f->state = CLOSED;
-	break;
-    case STOPPING:
-	f->state = CLOSING;
-	break;
-
-    case REQSENT:
-    case ACKRCVD:
-    case ACKSENT:
-    case OPENED:
-	if( f->state != OPENED )
-	    UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	else if( f->callbacks->down )
-	    (*f->callbacks->down)(f);	/* Inform upper layers we're down */
-
-	/* Init restart counter, send Terminate-Request */
-	f->retransmits = f->maxtermtransmits;
-	fsm_sdata(f, TERMREQ, f->reqid = ++f->id,
-		  (u_char *) f->term_reason, f->term_reason_len);
-	TIMEOUT(fsm_timeout, f, f->timeouttime);
-	--f->retransmits;
-
-	f->state = CLOSING;
-	break;
-    }
-}
-
-
-/*
- * fsm_timeout - Timeout expired.
- */
-static void
-fsm_timeout(arg)
-    void *arg;
-{
-    fsm *f = (fsm *) arg;
-
-    switch (f->state) {
-    case CLOSING:
-    case STOPPING:
-	if( f->retransmits <= 0 ){
-	    /*
-	     * We've waited for an ack long enough.  Peer probably heard us.
-	     */
-	    f->state = (f->state == CLOSING)? CLOSED: STOPPED;
-	    if( f->callbacks->finished )
-		(*f->callbacks->finished)(f);
-	} else {
-	    /* Send Terminate-Request */
-	    fsm_sdata(f, TERMREQ, f->reqid = ++f->id,
-		      (u_char *) f->term_reason, f->term_reason_len);
-	    TIMEOUT(fsm_timeout, f, f->timeouttime);
-	    --f->retransmits;
-	}
-	break;
-
-    case REQSENT:
-    case ACKRCVD:
-    case ACKSENT:
-	if (f->retransmits <= 0) {
-	    warn("%s: timeout sending Config-Requests\n", PROTO_NAME(f));
-	    f->state = STOPPED;
-	    if( (f->flags & OPT_PASSIVE) == 0 && f->callbacks->finished )
-		(*f->callbacks->finished)(f);
-
-	} else {
-	    /* Retransmit the configure-request */
-	    if (f->callbacks->retransmit)
-		(*f->callbacks->retransmit)(f);
-	    fsm_sconfreq(f, 1);		/* Re-send Configure-Request */
-	    if( f->state == ACKRCVD )
-		f->state = REQSENT;
-	}
-	break;
-
-    default:
-	FSMDEBUG(("%s: Timeout event in state %d!", PROTO_NAME(f), f->state));
-    }
-}
-
-
-/*
- * fsm_input - Input packet.
- */
-void
-fsm_input(f, inpacket, l)
-    fsm *f;
-    u_char *inpacket;
-    int l;
-{
-    u_char *inp;
-    u_char code, id;
-    int len;
-
-    /*
-     * Parse header (code, id and length).
-     * If packet too short, drop it.
-     */
-    inp = inpacket;
-    if (l < HEADERLEN) {
-	FSMDEBUG(("fsm_input(%x): Rcvd short header.", f->protocol));
-	return;
-    }
-    GETCHAR(code, inp);
-    GETCHAR(id, inp);
-    GETSHORT(len, inp);
-    if (len < HEADERLEN) {
-	FSMDEBUG(("fsm_input(%x): Rcvd illegal length.", f->protocol));
-	return;
-    }
-    if (len > l) {
-	FSMDEBUG(("fsm_input(%x): Rcvd short packet.", f->protocol));
-	return;
-    }
-    len -= HEADERLEN;		/* subtract header length */
-
-    if( f->state == INITIAL || f->state == STARTING ){
-	FSMDEBUG(("fsm_input(%x): Rcvd packet in state %d.",
-		  f->protocol, f->state));
-	return;
-    }
-
-    /*
-     * Action depends on code.
-     */
-    switch (code) {
-    case CONFREQ:
-	fsm_rconfreq(f, id, inp, len);
-	break;
-    
-    case CONFACK:
-	fsm_rconfack(f, id, inp, len);
-	break;
-    
-    case CONFNAK:
-    case CONFREJ:
-	fsm_rconfnakrej(f, code, id, inp, len);
-	break;
-    
-    case TERMREQ:
-	fsm_rtermreq(f, id, inp, len);
-	break;
-    
-    case TERMACK:
-	fsm_rtermack(f);
-	break;
-    
-    case CODEREJ:
-	fsm_rcoderej(f, inp, len);
-	break;
-    
-    default:
-	if( !f->callbacks->extcode
-	   || !(*f->callbacks->extcode)(f, code, id, inp, len) )
-	    fsm_sdata(f, CODEREJ, ++f->id, inpacket, len + HEADERLEN);
-	break;
-    }
-}
-
-
-/*
- * fsm_rconfreq - Receive Configure-Request.
- */
-static void
-fsm_rconfreq(f, id, inp, len)
-    fsm *f;
-    u_char id;
-    u_char *inp;
-    int len;
-{
-    int code, reject_if_disagree;
-
-    switch( f->state ){
-    case CLOSED:
-	/* Go away, we're closed */
-	fsm_sdata(f, TERMACK, id, NULL, 0);
-	return;
-    case CLOSING:
-    case STOPPING:
-	return;
-
-    case OPENED:
-	/* Go down and restart negotiation */
-	if( f->callbacks->down )
-	    (*f->callbacks->down)(f);	/* Inform upper layers */
-	fsm_sconfreq(f, 0);		/* Send initial Configure-Request */
-	break;
-
-    case STOPPED:
-	/* Negotiation started by our peer */
-	fsm_sconfreq(f, 0);		/* Send initial Configure-Request */
-	f->state = REQSENT;
-	break;
-    }
-
-    /*
-     * Pass the requested configuration options
-     * to protocol-specific code for checking.
-     */
-    if (f->callbacks->reqci){		/* Check CI */
-	reject_if_disagree = (f->nakloops >= f->maxnakloops);
-	code = (*f->callbacks->reqci)(f, inp, &len, reject_if_disagree);
-    } else if (len)
-	code = CONFREJ;			/* Reject all CI */
-    else
-	code = CONFACK;
-
-    /* send the Ack, Nak or Rej to the peer */
-    fsm_sdata(f, code, id, inp, len);
-
-    if (code == CONFACK) {
-	if (f->state == ACKRCVD) {
-	    UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	    f->state = OPENED;
-	    if (f->callbacks->up)
-		(*f->callbacks->up)(f);	/* Inform upper layers */
-	} else
-	    f->state = ACKSENT;
-	f->nakloops = 0;
-
-    } else {
-	/* we sent CONFACK or CONFREJ */
-	if (f->state != ACKRCVD)
-	    f->state = REQSENT;
-	if( code == CONFNAK )
-	    ++f->nakloops;
-    }
-}
-
-
-/*
- * fsm_rconfack - Receive Configure-Ack.
- */
-static void
-fsm_rconfack(f, id, inp, len)
-    fsm *f;
-    int id;
-    u_char *inp;
-    int len;
-{
-    if (id != f->reqid || f->seen_ack)		/* Expected id? */
-	return;					/* Nope, toss... */
-    if( !(f->callbacks->ackci? (*f->callbacks->ackci)(f, inp, len):
-	  (len == 0)) ){
-	/* Ack is bad - ignore it */
-	error("Received bad configure-ack: %P", inp, len);
-	return;
-    }
-    f->seen_ack = 1;
-
-    switch (f->state) {
-    case CLOSED:
-    case STOPPED:
-	fsm_sdata(f, TERMACK, id, NULL, 0);
-	break;
-
-    case REQSENT:
-	f->state = ACKRCVD;
-	f->retransmits = f->maxconfreqtransmits;
-	break;
-
-    case ACKRCVD:
-	/* Huh? an extra valid Ack? oh well... */
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	fsm_sconfreq(f, 0);
-	f->state = REQSENT;
-	break;
-
-    case ACKSENT:
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	f->state = OPENED;
-	f->retransmits = f->maxconfreqtransmits;
-	if (f->callbacks->up)
-	    (*f->callbacks->up)(f);	/* Inform upper layers */
-	break;
-
-    case OPENED:
-	/* Go down and restart negotiation */
-	if (f->callbacks->down)
-	    (*f->callbacks->down)(f);	/* Inform upper layers */
-	fsm_sconfreq(f, 0);		/* Send initial Configure-Request */
-	f->state = REQSENT;
-	break;
-    }
-}
-
-
-/*
- * fsm_rconfnakrej - Receive Configure-Nak or Configure-Reject.
- */
-static void
-fsm_rconfnakrej(f, code, id, inp, len)
-    fsm *f;
-    int code, id;
-    u_char *inp;
-    int len;
-{
-    int (*proc) __P((fsm *, u_char *, int));
-    int ret;
-
-    if (id != f->reqid || f->seen_ack)	/* Expected id? */
-	return;				/* Nope, toss... */
-    proc = (code == CONFNAK)? f->callbacks->nakci: f->callbacks->rejci;
-    if (!proc || !(ret = proc(f, inp, len))) {
-	/* Nak/reject is bad - ignore it */
-	error("Received bad configure-nak/rej: %P", inp, len);
-	return;
-    }
-    f->seen_ack = 1;
-
-    switch (f->state) {
-    case CLOSED:
-    case STOPPED:
-	fsm_sdata(f, TERMACK, id, NULL, 0);
-	break;
-
-    case REQSENT:
-    case ACKSENT:
-	/* They didn't agree to what we wanted - try another request */
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	if (ret < 0)
-	    f->state = STOPPED;		/* kludge for stopping CCP */
-	else
-	    fsm_sconfreq(f, 0);		/* Send Configure-Request */
-	break;
-
-    case ACKRCVD:
-	/* Got a Nak/reject when we had already had an Ack?? oh well... */
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	fsm_sconfreq(f, 0);
-	f->state = REQSENT;
-	break;
-
-    case OPENED:
-	/* Go down and restart negotiation */
-	if (f->callbacks->down)
-	    (*f->callbacks->down)(f);	/* Inform upper layers */
-	fsm_sconfreq(f, 0);		/* Send initial Configure-Request */
-	f->state = REQSENT;
-	break;
-    }
-}
-
-
-/*
- * fsm_rtermreq - Receive Terminate-Req.
- */
-static void
-fsm_rtermreq(f, id, p, len)
-    fsm *f;
-    int id;
-    u_char *p;
-    int len;
-{
-    switch (f->state) {
-    case ACKRCVD:
-    case ACKSENT:
-	f->state = REQSENT;		/* Start over but keep trying */
-	break;
-
-    case OPENED:
-	if (len > 0) {
-	    info("%s terminated by peer (%0.*v)", PROTO_NAME(f), len, p);
-	} else
-	    info("%s terminated by peer", PROTO_NAME(f));
-	if (f->callbacks->down)
-	    (*f->callbacks->down)(f);	/* Inform upper layers */
-	f->retransmits = 0;
-	f->state = STOPPING;
-	TIMEOUT(fsm_timeout, f, f->timeouttime);
-	break;
-    }
-
-    fsm_sdata(f, TERMACK, id, NULL, 0);
-}
-
-
-/*
- * fsm_rtermack - Receive Terminate-Ack.
- */
-static void
-fsm_rtermack(f)
-    fsm *f;
-{
-    switch (f->state) {
-    case CLOSING:
-	UNTIMEOUT(fsm_timeout, f);
-	f->state = CLOSED;
-	if( f->callbacks->finished )
-	    (*f->callbacks->finished)(f);
-	break;
-    case STOPPING:
-	UNTIMEOUT(fsm_timeout, f);
-	f->state = STOPPED;
-	if( f->callbacks->finished )
-	    (*f->callbacks->finished)(f);
-	break;
-
-    case ACKRCVD:
-	f->state = REQSENT;
-	break;
-
-    case OPENED:
-	if (f->callbacks->down)
-	    (*f->callbacks->down)(f);	/* Inform upper layers */
-	fsm_sconfreq(f, 0);
-	break;
-    }
-}
-
-
-/*
- * fsm_rcoderej - Receive an Code-Reject.
- */
-static void
-fsm_rcoderej(f, inp, len)
-    fsm *f;
-    u_char *inp;
-    int len;
-{
-    u_char code, id;
-
-    if (len < HEADERLEN) {
-	FSMDEBUG(("fsm_rcoderej: Rcvd short Code-Reject packet!"));
-	return;
-    }
-    GETCHAR(code, inp);
-    GETCHAR(id, inp);
-    warn("%s: Rcvd Code-Reject for code %d, id %d", PROTO_NAME(f), code, id);
-
-    if( f->state == ACKRCVD )
-	f->state = REQSENT;
-}
-
-
-/*
- * fsm_protreject - Peer doesn't speak this protocol.
- *
- * Treat this as a catastrophic error (RXJ-).
- */
-void
-fsm_protreject(f)
-    fsm *f;
-{
-    switch( f->state ){
-    case CLOSING:
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	/* fall through */
-    case CLOSED:
-	f->state = CLOSED;
-	if( f->callbacks->finished )
-	    (*f->callbacks->finished)(f);
-	break;
-
-    case STOPPING:
-    case REQSENT:
-    case ACKRCVD:
-    case ACKSENT:
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	/* fall through */
-    case STOPPED:
-	f->state = STOPPED;
-	if( f->callbacks->finished )
-	    (*f->callbacks->finished)(f);
-	break;
-
-    case OPENED:
-	if( f->callbacks->down )
-	    (*f->callbacks->down)(f);
-
-	/* Init restart counter, send Terminate-Request */
-	f->retransmits = f->maxtermtransmits;
-	fsm_sdata(f, TERMREQ, f->reqid = ++f->id,
-		  (u_char *) f->term_reason, f->term_reason_len);
-	TIMEOUT(fsm_timeout, f, f->timeouttime);
-	--f->retransmits;
-
-	f->state = STOPPING;
-	break;
-
-    default:
-	FSMDEBUG(("%s: Protocol-reject event in state %d!",
-		  PROTO_NAME(f), f->state));
-    }
-}
-
-
-/*
- * fsm_sconfreq - Send a Configure-Request.
- */
-static void
-fsm_sconfreq(f, retransmit)
-    fsm *f;
-    int retransmit;
-{
-    u_char *outp;
-    int cilen;
-
-    if( f->state != REQSENT && f->state != ACKRCVD && f->state != ACKSENT ){
-	/* Not currently negotiating - reset options */
-	if( f->callbacks->resetci )
-	    (*f->callbacks->resetci)(f);
-	f->nakloops = 0;
-    }
-
-    if( !retransmit ){
-	/* New request - reset retransmission counter, use new ID */
-	f->retransmits = f->maxconfreqtransmits;
-	f->reqid = ++f->id;
-    }
-
-    f->seen_ack = 0;
-
-    /*
-     * Make up the request packet
-     */
-    outp = outpacket_buf + PPP_HDRLEN + HEADERLEN;
-    if( f->callbacks->cilen && f->callbacks->addci ){
-	cilen = (*f->callbacks->cilen)(f);
-	if( cilen > peer_mru[f->unit] - HEADERLEN )
-	    cilen = peer_mru[f->unit] - HEADERLEN;
-	if (f->callbacks->addci)
-	    (*f->callbacks->addci)(f, outp, &cilen);
-    } else
-	cilen = 0;
-
-    /* send the request to our peer */
-    fsm_sdata(f, CONFREQ, f->reqid, outp, cilen);
-
-    /* start the retransmit timer */
-    --f->retransmits;
-    TIMEOUT(fsm_timeout, f, f->timeouttime);
-}
-
-
-/*
- * fsm_sdata - Send some data.
- *
- * Used for all packets sent to our peer by this module.
- */
-void
-fsm_sdata(f, code, id, data, datalen)
-    fsm *f;
-    u_char code, id;
-    u_char *data;
-    int datalen;
-{
-    u_char *outp;
-    int outlen;
-
-    /* Adjust length to be smaller than MTU */
-    outp = outpacket_buf;
-    if (datalen > peer_mru[f->unit] - HEADERLEN)
-	datalen = peer_mru[f->unit] - HEADERLEN;
-    if (datalen && data != outp + PPP_HDRLEN + HEADERLEN)
-	BCOPY(data, outp + PPP_HDRLEN + HEADERLEN, datalen);
-    outlen = datalen + HEADERLEN;
-    MAKEHEADER(outp, f->protocol);
-    PUTCHAR(code, outp);
-    PUTCHAR(id, outp);
-    PUTSHORT(outlen, outp);
-    output(f->unit, outpacket_buf, outlen + PPP_HDRLEN);
-}
diff --git a/mdk-stage1/ppp/pppd/fsm.h b/mdk-stage1/ppp/pppd/fsm.h
deleted file mode 100644
index c94a68e6c..000000000
--- a/mdk-stage1/ppp/pppd/fsm.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * fsm.h - {Link, IP} Control Protocol Finite State Machine definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Packet header = Code, id, length.
- */
-#define HEADERLEN	4
-
-
-/*
- *  CP (LCP, IPCP, etc.) codes.
- */
-#define CONFREQ		1	/* Configuration Request */
-#define CONFACK		2	/* Configuration Ack */
-#define CONFNAK		3	/* Configuration Nak */
-#define CONFREJ		4	/* Configuration Reject */
-#define TERMREQ		5	/* Termination Request */
-#define TERMACK		6	/* Termination Ack */
-#define CODEREJ		7	/* Code Reject */
-
-
-/*
- * Each FSM is described by an fsm structure and fsm callbacks.
- */
-typedef struct fsm {
-    int unit;			/* Interface unit number */
-    int protocol;		/* Data Link Layer Protocol field value */
-    int state;			/* State */
-    int flags;			/* Contains option bits */
-    u_char id;			/* Current id */
-    u_char reqid;		/* Current request id */
-    u_char seen_ack;		/* Have received valid Ack/Nak/Rej to Req */
-    int timeouttime;		/* Timeout time in milliseconds */
-    int maxconfreqtransmits;	/* Maximum Configure-Request transmissions */
-    int retransmits;		/* Number of retransmissions left */
-    int maxtermtransmits;	/* Maximum Terminate-Request transmissions */
-    int nakloops;		/* Number of nak loops since last ack */
-    int maxnakloops;		/* Maximum number of nak loops tolerated */
-    struct fsm_callbacks *callbacks;	/* Callback routines */
-    char *term_reason;		/* Reason for closing protocol */
-    int term_reason_len;	/* Length of term_reason */
-} fsm;
-
-
-typedef struct fsm_callbacks {
-    void (*resetci)		/* Reset our Configuration Information */
-		__P((fsm *));
-    int  (*cilen)		/* Length of our Configuration Information */
-		__P((fsm *));
-    void (*addci) 		/* Add our Configuration Information */
-		__P((fsm *, u_char *, int *));
-    int  (*ackci)		/* ACK our Configuration Information */
-		__P((fsm *, u_char *, int));
-    int  (*nakci)		/* NAK our Configuration Information */
-		__P((fsm *, u_char *, int));
-    int  (*rejci)		/* Reject our Configuration Information */
-		__P((fsm *, u_char *, int));
-    int  (*reqci)		/* Request peer's Configuration Information */
-		__P((fsm *, u_char *, int *, int));
-    void (*up)			/* Called when fsm reaches OPENED state */
-		__P((fsm *));
-    void (*down)		/* Called when fsm leaves OPENED state */
-		__P((fsm *));
-    void (*starting)		/* Called when we want the lower layer */
-		__P((fsm *));
-    void (*finished)		/* Called when we don't want the lower layer */
-		__P((fsm *));
-    void (*protreject)		/* Called when Protocol-Reject received */
-		__P((int));
-    void (*retransmit)		/* Retransmission is necessary */
-		__P((fsm *));
-    int  (*extcode)		/* Called when unknown code received */
-		__P((fsm *, int, int, u_char *, int));
-    char *proto_name;		/* String name for protocol (for messages) */
-} fsm_callbacks;
-
-
-/*
- * Link states.
- */
-#define INITIAL		0	/* Down, hasn't been opened */
-#define STARTING	1	/* Down, been opened */
-#define CLOSED		2	/* Up, hasn't been opened */
-#define STOPPED		3	/* Open, waiting for down event */
-#define CLOSING		4	/* Terminating the connection, not open */
-#define STOPPING	5	/* Terminating, but open */
-#define REQSENT		6	/* We've sent a Config Request */
-#define ACKRCVD		7	/* We've received a Config Ack */
-#define ACKSENT		8	/* We've sent a Config Ack */
-#define OPENED		9	/* Connection available */
-
-
-/*
- * Flags - indicate options controlling FSM operation
- */
-#define OPT_PASSIVE	1	/* Don't die if we don't get a response */
-#define OPT_RESTART	2	/* Treat 2nd OPEN as DOWN, UP */
-#define OPT_SILENT	4	/* Wait for peer to speak first */
-
-
-/*
- * Timeouts.
- */
-#define DEFTIMEOUT	3	/* Timeout time in seconds */
-#define DEFMAXTERMREQS	2	/* Maximum Terminate-Request transmissions */
-#define DEFMAXCONFREQS	10	/* Maximum Configure-Request transmissions */
-#define DEFMAXNAKLOOPS	5	/* Maximum number of nak loops */
-
-
-/*
- * Prototypes
- */
-void fsm_init __P((fsm *));
-void fsm_lowerup __P((fsm *));
-void fsm_lowerdown __P((fsm *));
-void fsm_open __P((fsm *));
-void fsm_close __P((fsm *, char *));
-void fsm_input __P((fsm *, u_char *, int));
-void fsm_protreject __P((fsm *));
-void fsm_sdata __P((fsm *, int, int, u_char *, int));
-
-
-/*
- * Variables
- */
-extern int peer_mru[];		/* currently negotiated peer MRU (per unit) */
diff --git a/mdk-stage1/ppp/pppd/ipcp.c b/mdk-stage1/ppp/pppd/ipcp.c
deleted file mode 100644
index 3f64357ed..000000000
--- a/mdk-stage1/ppp/pppd/ipcp.c
+++ /dev/null
@@ -1,2054 +0,0 @@
-/*
- * ipcp.c - PPP IP Control Protocol.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-/*
- * TODO:
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <netdb.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipcp.h"
-#include "pathnames.h"
-
-static const char rcsid[] = RCSID;
-
-/* global vars */
-ipcp_options ipcp_wantoptions[NUM_PPP];	/* Options that we want to request */
-ipcp_options ipcp_gotoptions[NUM_PPP];	/* Options that peer ack'd */
-ipcp_options ipcp_allowoptions[NUM_PPP]; /* Options we allow peer to request */
-ipcp_options ipcp_hisoptions[NUM_PPP];	/* Options that we ack'd */
-
-u_int32_t netmask = 0;		/* IP netmask to set on interface */
-
-bool	disable_defaultip = 0;	/* Don't use hostname for default IP adrs */
-
-/* Hook for a plugin to know when IP protocol has come up */
-void (*ip_up_hook) __P((void)) = NULL;
-
-/* Hook for a plugin to know when IP protocol has come down */
-void (*ip_down_hook) __P((void)) = NULL;
-
-/* Hook for a plugin to choose the remote IP address */
-void (*ip_choose_hook) __P((u_int32_t *)) = NULL;
-
-/* local vars */
-static int default_route_set[NUM_PPP];	/* Have set up a default route */
-static int proxy_arp_set[NUM_PPP];	/* Have created proxy arp entry */
-static bool usepeerdns;			/* Ask peer for DNS addrs */
-static int ipcp_is_up;			/* have called np_up() */
-static bool ask_for_local;		/* request our address from peer */
-static char vj_value[8];		/* string form of vj option value */
-static char netmask_str[20];		/* string form of netmask value */
-
-/*
- * Callbacks for fsm code.  (CI = Configuration Information)
- */
-static void ipcp_resetci __P((fsm *));	/* Reset our CI */
-static int  ipcp_cilen __P((fsm *));	        /* Return length of our CI */
-static void ipcp_addci __P((fsm *, u_char *, int *)); /* Add our CI */
-static int  ipcp_ackci __P((fsm *, u_char *, int));	/* Peer ack'd our CI */
-static int  ipcp_nakci __P((fsm *, u_char *, int));	/* Peer nak'd our CI */
-static int  ipcp_rejci __P((fsm *, u_char *, int));	/* Peer rej'd our CI */
-static int  ipcp_reqci __P((fsm *, u_char *, int *, int)); /* Rcv CI */
-static void ipcp_up __P((fsm *));		/* We're UP */
-static void ipcp_down __P((fsm *));		/* We're DOWN */
-static void ipcp_finished __P((fsm *));	/* Don't need lower layer */
-
-fsm ipcp_fsm[NUM_PPP];		/* IPCP fsm structure */
-
-static fsm_callbacks ipcp_callbacks = { /* IPCP callback routines */
-    ipcp_resetci,		/* Reset our Configuration Information */
-    ipcp_cilen,			/* Length of our Configuration Information */
-    ipcp_addci,			/* Add our Configuration Information */
-    ipcp_ackci,			/* ACK our Configuration Information */
-    ipcp_nakci,			/* NAK our Configuration Information */
-    ipcp_rejci,			/* Reject our Configuration Information */
-    ipcp_reqci,			/* Request peer's Configuration Information */
-    ipcp_up,			/* Called when fsm reaches OPENED state */
-    ipcp_down,			/* Called when fsm leaves OPENED state */
-    NULL,			/* Called when we want the lower layer up */
-    ipcp_finished,		/* Called when we want the lower layer down */
-    NULL,			/* Called when Protocol-Reject received */
-    NULL,			/* Retransmission is necessary */
-    NULL,			/* Called to handle protocol-specific codes */
-    "IPCP"			/* String name of protocol */
-};
-
-/*
- * Command-line options.
- */
-static int setvjslots __P((char **));
-static int setdnsaddr __P((char **));
-static int setwinsaddr __P((char **));
-static int setnetmask __P((char **));
-static int setipaddr __P((char *, char **, int));
-static void printipaddr __P((option_t *, void (*)(void *, char *,...),void *));
-
-static option_t ipcp_option_list[] = {
-    { "noip", o_bool, &ipcp_protent.enabled_flag,
-      "Disable IP and IPCP" },
-    { "-ip", o_bool, &ipcp_protent.enabled_flag,
-      "Disable IP and IPCP", OPT_ALIAS },
-
-    { "novj", o_bool, &ipcp_wantoptions[0].neg_vj,
-      "Disable VJ compression", OPT_A2CLR, &ipcp_allowoptions[0].neg_vj },
-    { "-vj", o_bool, &ipcp_wantoptions[0].neg_vj,
-      "Disable VJ compression", OPT_ALIAS | OPT_A2CLR,
-      &ipcp_allowoptions[0].neg_vj },
-
-    { "novjccomp", o_bool, &ipcp_wantoptions[0].cflag,
-      "Disable VJ connection-ID compression", OPT_A2CLR,
-      &ipcp_allowoptions[0].cflag },
-    { "-vjccomp", o_bool, &ipcp_wantoptions[0].cflag,
-      "Disable VJ connection-ID compression", OPT_ALIAS | OPT_A2CLR,
-      &ipcp_allowoptions[0].cflag },
-
-    { "vj-max-slots", o_special, (void *)setvjslots,
-      "Set maximum VJ header slots",
-      OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, vj_value },
-
-    { "ipcp-accept-local", o_bool, &ipcp_wantoptions[0].accept_local,
-      "Accept peer's address for us", 1 },
-    { "ipcp-accept-remote", o_bool, &ipcp_wantoptions[0].accept_remote,
-      "Accept peer's address for it", 1 },
-
-    { "ipparam", o_string, &ipparam,
-      "Set ip script parameter", OPT_PRIO },
-
-    { "noipdefault", o_bool, &disable_defaultip,
-      "Don't use name for default IP adrs", 1 },
-
-    { "ms-dns", 1, (void *)setdnsaddr,
-      "DNS address for the peer's use" },
-    { "ms-wins", 1, (void *)setwinsaddr,
-      "Nameserver for SMB over TCP/IP for peer" },
-
-    { "ipcp-restart", o_int, &ipcp_fsm[0].timeouttime,
-      "Set timeout for IPCP", OPT_PRIO },
-    { "ipcp-max-terminate", o_int, &ipcp_fsm[0].maxtermtransmits,
-      "Set max #xmits for term-reqs", OPT_PRIO },
-    { "ipcp-max-configure", o_int, &ipcp_fsm[0].maxconfreqtransmits,
-      "Set max #xmits for conf-reqs", OPT_PRIO },
-    { "ipcp-max-failure", o_int, &ipcp_fsm[0].maxnakloops,
-      "Set max #conf-naks for IPCP", OPT_PRIO },
-
-    { "defaultroute", o_bool, &ipcp_wantoptions[0].default_route,
-      "Add default route", OPT_ENABLE|1, &ipcp_allowoptions[0].default_route },
-    { "nodefaultroute", o_bool, &ipcp_allowoptions[0].default_route,
-      "disable defaultroute option", OPT_A2CLR,
-      &ipcp_wantoptions[0].default_route },
-    { "-defaultroute", o_bool, &ipcp_allowoptions[0].default_route,
-      "disable defaultroute option", OPT_ALIAS | OPT_A2CLR,
-      &ipcp_wantoptions[0].default_route },
-
-    { "proxyarp", o_bool, &ipcp_wantoptions[0].proxy_arp,
-      "Add proxy ARP entry", OPT_ENABLE|1, &ipcp_allowoptions[0].proxy_arp },
-    { "noproxyarp", o_bool, &ipcp_allowoptions[0].proxy_arp,
-      "disable proxyarp option", OPT_A2CLR,
-      &ipcp_wantoptions[0].proxy_arp },
-    { "-proxyarp", o_bool, &ipcp_allowoptions[0].proxy_arp,
-      "disable proxyarp option", OPT_ALIAS | OPT_A2CLR,
-      &ipcp_wantoptions[0].proxy_arp },
-
-    { "usepeerdns", o_bool, &usepeerdns,
-      "Ask peer for DNS address(es)", 1 },
-
-    { "netmask", o_special, (void *)setnetmask,
-      "set netmask", OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, netmask_str },
-
-    { "IP addresses", o_wild, (void *) &setipaddr,
-      "set local and remote IP addresses",
-      OPT_NOARG | OPT_A2PRINTER, (void *) &printipaddr },
-
-    { NULL }
-};
-
-/*
- * Protocol entry points from main code.
- */
-static void ipcp_init __P((int));
-static void ipcp_open __P((int));
-static void ipcp_close __P((int, char *));
-static void ipcp_lowerup __P((int));
-static void ipcp_lowerdown __P((int));
-static void ipcp_input __P((int, u_char *, int));
-static void ipcp_protrej __P((int));
-static int  ipcp_printpkt __P((u_char *, int,
-			       void (*) __P((void *, char *, ...)), void *));
-static void ip_check_options __P((void));
-static int  ip_demand_conf __P((int));
-static int  ip_active_pkt __P((u_char *, int));
-static void create_resolv __P((u_int32_t, u_int32_t));
-
-struct protent ipcp_protent = {
-    PPP_IPCP,
-    ipcp_init,
-    ipcp_input,
-    ipcp_protrej,
-    ipcp_lowerup,
-    ipcp_lowerdown,
-    ipcp_open,
-    ipcp_close,
-    ipcp_printpkt,
-    NULL,
-    1,
-    "IPCP",
-    "IP",
-    ipcp_option_list,
-    ip_check_options,
-    ip_demand_conf,
-    ip_active_pkt
-};
-
-static void ipcp_clear_addrs __P((int, u_int32_t, u_int32_t));
-static void ipcp_script __P((char *));		/* Run an up/down script */
-static void ipcp_script_done __P((void *));
-
-/*
- * Lengths of configuration options.
- */
-#define CILEN_VOID	2
-#define CILEN_COMPRESS	4	/* min length for compression protocol opt. */
-#define CILEN_VJ	6	/* length for RFC1332 Van-Jacobson opt. */
-#define CILEN_ADDR	6	/* new-style single address option */
-#define CILEN_ADDRS	10	/* old-style dual address option */
-
-
-#define CODENAME(x)	((x) == CONFACK ? "ACK" : \
-			 (x) == CONFNAK ? "NAK" : "REJ")
-
-/*
- * This state variable is used to ensure that we don't
- * run an ipcp-up/down script while one is already running.
- */
-static enum script_state {
-    s_down,
-    s_up,
-} ipcp_script_state;
-static pid_t ipcp_script_pid;
-
-/*
- * Make a string representation of a network IP address.
- */
-char *
-ip_ntoa(ipaddr)
-u_int32_t ipaddr;
-{
-    static char b[64];
-
-    slprintf(b, sizeof(b), "%I", ipaddr);
-    return b;
-}
-
-/*
- * Option parsing.
- */
-
-/*
- * setvjslots - set maximum number of connection slots for VJ compression
- */
-static int
-setvjslots(argv)
-    char **argv;
-{
-    int value;
-
-    if (!int_option(*argv, &value))
-	return 0;
-    if (value < 2 || value > 16) {
-	option_error("vj-max-slots value must be between 2 and 16");
-	return 0;
-    }
-    ipcp_wantoptions [0].maxslotindex =
-        ipcp_allowoptions[0].maxslotindex = value - 1;
-    slprintf(vj_value, sizeof(vj_value), "%d", value);
-    return 1;
-}
-
-/*
- * setdnsaddr - set the dns address(es)
- */
-static int
-setdnsaddr(argv)
-    char **argv;
-{
-    u_int32_t dns;
-    struct hostent *hp;
-
-    dns = inet_addr(*argv);
-    if (dns == (u_int32_t) -1) {
-	if ((hp = gethostbyname(*argv)) == NULL) {
-	    option_error("invalid address parameter '%s' for ms-dns option",
-			 *argv);
-	    return 0;
-	}
-	dns = *(u_int32_t *)hp->h_addr;
-    }
-
-    /* We take the last 2 values given, the 2nd-last as the primary
-       and the last as the secondary.  If only one is given it
-       becomes both primary and secondary. */
-    if (ipcp_allowoptions[0].dnsaddr[1] == 0)
-	ipcp_allowoptions[0].dnsaddr[0] = dns;
-    else
-	ipcp_allowoptions[0].dnsaddr[0] = ipcp_allowoptions[0].dnsaddr[1];
-
-    /* always set the secondary address value. */
-    ipcp_allowoptions[0].dnsaddr[1] = dns;
-
-    return (1);
-}
-
-/*
- * setwinsaddr - set the wins address(es)
- * This is primrarly used with the Samba package under UNIX or for pointing
- * the caller to the existing WINS server on a Windows NT platform.
- */
-static int
-setwinsaddr(argv)
-    char **argv;
-{
-    u_int32_t wins;
-    struct hostent *hp;
-
-    wins = inet_addr(*argv);
-    if (wins == (u_int32_t) -1) {
-	if ((hp = gethostbyname(*argv)) == NULL) {
-	    option_error("invalid address parameter '%s' for ms-wins option",
-			 *argv);
-	    return 0;
-	}
-	wins = *(u_int32_t *)hp->h_addr;
-    }
-
-    /* We take the last 2 values given, the 2nd-last as the primary
-       and the last as the secondary.  If only one is given it
-       becomes both primary and secondary. */
-    if (ipcp_allowoptions[0].winsaddr[1] == 0)
-	ipcp_allowoptions[0].winsaddr[0] = wins;
-    else
-	ipcp_allowoptions[0].winsaddr[0] = ipcp_allowoptions[0].winsaddr[1];
-
-    /* always set the secondary address value. */
-    ipcp_allowoptions[0].winsaddr[1] = wins;
-
-    return (1);
-}
-
-/*
- * setipaddr - Set the IP address
- * If doit is 0, the call is to check whether this option is
- * potentially an IP address specification.
- */
-static int
-setipaddr(arg, argv, doit)
-    char *arg;
-    char **argv;
-    int doit;
-{
-    struct hostent *hp;
-    char *colon;
-    u_int32_t local, remote;
-    ipcp_options *wo = &ipcp_wantoptions[0];
-    static int prio_local = 0, prio_remote = 0;
-
-    /*
-     * IP address pair separated by ":".
-     */
-    if ((colon = strchr(arg, ':')) == NULL)
-	return 0;
-    if (!doit)
-	return 1;
-  
-    /*
-     * If colon first character, then no local addr.
-     */
-    if (colon != arg && option_priority >= prio_local) {
-	*colon = '\0';
-	if ((local = inet_addr(arg)) == (u_int32_t) -1) {
-	    if ((hp = gethostbyname(arg)) == NULL) {
-		option_error("unknown host: %s", arg);
-		return 0;
-	    }
-	    local = *(u_int32_t *)hp->h_addr;
-	}
-	if (bad_ip_adrs(local)) {
-	    option_error("bad local IP address %s", ip_ntoa(local));
-	    return 0;
-	}
-	if (local != 0)
-	    wo->ouraddr = local;
-	*colon = ':';
-	prio_local = option_priority;
-    }
-  
-    /*
-     * If colon last character, then no remote addr.
-     */
-    if (*++colon != '\0' && option_priority >= prio_remote) {
-	if ((remote = inet_addr(colon)) == (u_int32_t) -1) {
-	    if ((hp = gethostbyname(colon)) == NULL) {
-		option_error("unknown host: %s", colon);
-		return 0;
-	    }
-	    remote = *(u_int32_t *)hp->h_addr;
-	    if (remote_name[0] == 0)
-		strlcpy(remote_name, colon, sizeof(remote_name));
-	}
-	if (bad_ip_adrs(remote)) {
-	    option_error("bad remote IP address %s", ip_ntoa(remote));
-	    return 0;
-	}
-	if (remote != 0)
-	    wo->hisaddr = remote;
-	prio_remote = option_priority;
-    }
-
-    return 1;
-}
-
-static void
-printipaddr(opt, printer, arg)
-    option_t *opt;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	ipcp_options *wo = &ipcp_wantoptions[0];
-
-	if (wo->ouraddr != 0)
-		printer(arg, "%I", wo->ouraddr);
-	printer(arg, ":");
-	if (wo->hisaddr != 0)
-		printer(arg, "%I", wo->hisaddr);
-}
-
-/*
- * setnetmask - set the netmask to be used on the interface.
- */
-static int
-setnetmask(argv)
-    char **argv;
-{
-    u_int32_t mask;
-    int n;
-    char *p;
-
-    /*
-     * Unfortunately, if we use inet_addr, we can't tell whether
-     * a result of all 1s is an error or a valid 255.255.255.255.
-     */
-    p = *argv;
-    n = parse_dotted_ip(p, &mask);
-
-    mask = htonl(mask);
-
-    if (n == 0 || p[n] != 0 || (netmask & ~mask) != 0) {
-	option_error("invalid netmask value '%s'", *argv);
-	return 0;
-    }
-
-    netmask = mask;
-    slprintf(netmask_str, sizeof(netmask_str), "%I", mask);
-
-    return (1);
-}
-
-int
-parse_dotted_ip(p, vp)
-    char *p;
-    u_int32_t *vp;
-{
-    int n;
-    u_int32_t v, b;
-    char *endp, *p0 = p;
-
-    v = 0;
-    for (n = 3;; --n) {
-	b = strtoul(p, &endp, 0);
-	if (endp == p)
-	    return 0;
-	if (b > 255) {
-	    if (n < 3)
-		return 0;
-	    /* accept e.g. 0xffffff00 */
-	    *vp = b;
-	    return endp - p0;
-	}
-	v |= b << (n * 8);
-	p = endp;
-	if (n == 0)
-	    break;
-	if (*p != '.')
-	    return 0;
-	++p;
-    }
-    *vp = v;
-    return p - p0;
-}
-
-
-/*
- * ipcp_init - Initialize IPCP.
- */
-static void
-ipcp_init(unit)
-    int unit;
-{
-    fsm *f = &ipcp_fsm[unit];
-    ipcp_options *wo = &ipcp_wantoptions[unit];
-    ipcp_options *ao = &ipcp_allowoptions[unit];
-
-    f->unit = unit;
-    f->protocol = PPP_IPCP;
-    f->callbacks = &ipcp_callbacks;
-    fsm_init(&ipcp_fsm[unit]);
-
-    memset(wo, 0, sizeof(*wo));
-    memset(ao, 0, sizeof(*ao));
-
-    wo->neg_addr = 1;
-    wo->neg_vj = 1;
-    wo->vj_protocol = IPCP_VJ_COMP;
-    wo->maxslotindex = MAX_STATES - 1; /* really max index */
-    wo->cflag = 1;
-
-
-    /* max slots and slot-id compression are currently hardwired in */
-    /* ppp_if.c to 16 and 1, this needs to be changed (among other */
-    /* things) gmc */
-
-    ao->neg_addr = 1;
-    ao->neg_vj = 1;
-    ao->maxslotindex = MAX_STATES - 1;
-    ao->cflag = 1;
-
-    /*
-     * XXX These control whether the user may use the proxyarp
-     * and defaultroute options.
-     */
-    ao->proxy_arp = 1;
-    ao->default_route = 1;
-}
-
-
-/*
- * ipcp_open - IPCP is allowed to come up.
- */
-static void
-ipcp_open(unit)
-    int unit;
-{
-    fsm_open(&ipcp_fsm[unit]);
-}
-
-
-/*
- * ipcp_close - Take IPCP down.
- */
-static void
-ipcp_close(unit, reason)
-    int unit;
-    char *reason;
-{
-    fsm_close(&ipcp_fsm[unit], reason);
-}
-
-
-/*
- * ipcp_lowerup - The lower layer is up.
- */
-static void
-ipcp_lowerup(unit)
-    int unit;
-{
-    fsm_lowerup(&ipcp_fsm[unit]);
-}
-
-
-/*
- * ipcp_lowerdown - The lower layer is down.
- */
-static void
-ipcp_lowerdown(unit)
-    int unit;
-{
-    fsm_lowerdown(&ipcp_fsm[unit]);
-}
-
-
-/*
- * ipcp_input - Input IPCP packet.
- */
-static void
-ipcp_input(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    fsm_input(&ipcp_fsm[unit], p, len);
-}
-
-
-/*
- * ipcp_protrej - A Protocol-Reject was received for IPCP.
- *
- * Pretend the lower layer went down, so we shut up.
- */
-static void
-ipcp_protrej(unit)
-    int unit;
-{
-    fsm_lowerdown(&ipcp_fsm[unit]);
-}
-
-
-/*
- * ipcp_resetci - Reset our CI.
- * Called by fsm_sconfreq, Send Configure Request.
- */
-static void
-ipcp_resetci(f)
-    fsm *f;
-{
-    ipcp_options *wo = &ipcp_wantoptions[f->unit];
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-
-    wo->req_addr = wo->neg_addr && ipcp_allowoptions[f->unit].neg_addr;
-    if (wo->ouraddr == 0)
-	wo->accept_local = 1;
-    if (wo->hisaddr == 0)
-	wo->accept_remote = 1;
-    wo->req_dns1 = usepeerdns;	/* Request DNS addresses from the peer */
-    wo->req_dns2 = usepeerdns;
-    *go = *wo;
-    if (!ask_for_local)
-	go->ouraddr = 0;
-    if (ip_choose_hook)
-	ip_choose_hook(&wo->hisaddr);
-}
-
-
-/*
- * ipcp_cilen - Return length of our CI.
- * Called by fsm_sconfreq, Send Configure Request.
- */
-static int
-ipcp_cilen(f)
-    fsm *f;
-{
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-    ipcp_options *wo = &ipcp_wantoptions[f->unit];
-    ipcp_options *ho = &ipcp_hisoptions[f->unit];
-
-#define LENCIVJ(neg, old)	(neg ? (old? CILEN_COMPRESS : CILEN_VJ) : 0)
-#define LENCIADDR(neg, old)	(neg ? (old? CILEN_ADDRS : CILEN_ADDR) : 0)
-#define LENCIDNS(neg)		(neg ? (CILEN_ADDR) : 0)
-
-    /*
-     * First see if we want to change our options to the old
-     * forms because we have received old forms from the peer.
-     */
-    if (wo->neg_addr && !go->neg_addr && !go->old_addrs) {
-	/* use the old style of address negotiation */
-	go->neg_addr = 1;
-	go->old_addrs = 1;
-    }
-    if (wo->neg_vj && !go->neg_vj && !go->old_vj) {
-	/* try an older style of VJ negotiation */
-	/* use the old style only if the peer did */
-	if (ho->neg_vj && ho->old_vj) {
-	    go->neg_vj = 1;
-	    go->old_vj = 1;
-	    go->vj_protocol = ho->vj_protocol;
-	}
-    }
-
-    return (LENCIADDR(go->neg_addr, go->old_addrs) +
-	    LENCIVJ(go->neg_vj, go->old_vj) +
-	    LENCIDNS(go->req_dns1) +
-	    LENCIDNS(go->req_dns2)) ;
-}
-
-
-/*
- * ipcp_addci - Add our desired CIs to a packet.
- * Called by fsm_sconfreq, Send Configure Request.
- */
-static void
-ipcp_addci(f, ucp, lenp)
-    fsm *f;
-    u_char *ucp;
-    int *lenp;
-{
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-    int len = *lenp;
-
-#define ADDCIVJ(opt, neg, val, old, maxslotindex, cflag) \
-    if (neg) { \
-	int vjlen = old? CILEN_COMPRESS : CILEN_VJ; \
-	if (len >= vjlen) { \
-	    PUTCHAR(opt, ucp); \
-	    PUTCHAR(vjlen, ucp); \
-	    PUTSHORT(val, ucp); \
-	    if (!old) { \
-		PUTCHAR(maxslotindex, ucp); \
-		PUTCHAR(cflag, ucp); \
-	    } \
-	    len -= vjlen; \
-	} else \
-	    neg = 0; \
-    }
-
-#define ADDCIADDR(opt, neg, old, val1, val2) \
-    if (neg) { \
-	int addrlen = (old? CILEN_ADDRS: CILEN_ADDR); \
-	if (len >= addrlen) { \
-	    u_int32_t l; \
-	    PUTCHAR(opt, ucp); \
-	    PUTCHAR(addrlen, ucp); \
-	    l = ntohl(val1); \
-	    PUTLONG(l, ucp); \
-	    if (old) { \
-		l = ntohl(val2); \
-		PUTLONG(l, ucp); \
-	    } \
-	    len -= addrlen; \
-	} else \
-	    neg = 0; \
-    }
-
-#define ADDCIDNS(opt, neg, addr) \
-    if (neg) { \
-	if (len >= CILEN_ADDR) { \
-	    u_int32_t l; \
-	    PUTCHAR(opt, ucp); \
-	    PUTCHAR(CILEN_ADDR, ucp); \
-	    l = ntohl(addr); \
-	    PUTLONG(l, ucp); \
-	    len -= CILEN_ADDR; \
-	} else \
-	    neg = 0; \
-    }
-
-    ADDCIADDR((go->old_addrs? CI_ADDRS: CI_ADDR), go->neg_addr,
-	      go->old_addrs, go->ouraddr, go->hisaddr);
-
-    ADDCIVJ(CI_COMPRESSTYPE, go->neg_vj, go->vj_protocol, go->old_vj,
-	    go->maxslotindex, go->cflag);
-
-    ADDCIDNS(CI_MS_DNS1, go->req_dns1, go->dnsaddr[0]);
-
-    ADDCIDNS(CI_MS_DNS2, go->req_dns2, go->dnsaddr[1]);
-
-    *lenp -= len;
-}
-
-
-/*
- * ipcp_ackci - Ack our CIs.
- * Called by fsm_rconfack, Receive Configure ACK.
- *
- * Returns:
- *	0 - Ack was bad.
- *	1 - Ack was good.
- */
-static int
-ipcp_ackci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-    u_short cilen, citype, cishort;
-    u_int32_t cilong;
-    u_char cimaxslotindex, cicflag;
-
-    /*
-     * CIs must be in exactly the same order that we sent...
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-
-#define ACKCIVJ(opt, neg, val, old, maxslotindex, cflag) \
-    if (neg) { \
-	int vjlen = old? CILEN_COMPRESS : CILEN_VJ; \
-	if ((len -= vjlen) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != vjlen || \
-	    citype != opt)  \
-	    goto bad; \
-	GETSHORT(cishort, p); \
-	if (cishort != val) \
-	    goto bad; \
-	if (!old) { \
-	    GETCHAR(cimaxslotindex, p); \
-	    if (cimaxslotindex != maxslotindex) \
-		goto bad; \
-	    GETCHAR(cicflag, p); \
-	    if (cicflag != cflag) \
-		goto bad; \
-	} \
-    }
-
-#define ACKCIADDR(opt, neg, old, val1, val2) \
-    if (neg) { \
-	int addrlen = (old? CILEN_ADDRS: CILEN_ADDR); \
-	u_int32_t l; \
-	if ((len -= addrlen) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != addrlen || \
-	    citype != opt) \
-	    goto bad; \
-	GETLONG(l, p); \
-	cilong = htonl(l); \
-	if (val1 != cilong) \
-	    goto bad; \
-	if (old) { \
-	    GETLONG(l, p); \
-	    cilong = htonl(l); \
-	    if (val2 != cilong) \
-		goto bad; \
-	} \
-    }
-
-#define ACKCIDNS(opt, neg, addr) \
-    if (neg) { \
-	u_int32_t l; \
-	if ((len -= CILEN_ADDR) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_ADDR || citype != opt) \
-	    goto bad; \
-	GETLONG(l, p); \
-	cilong = htonl(l); \
-	if (addr != cilong) \
-	    goto bad; \
-    }
-
-    ACKCIADDR((go->old_addrs? CI_ADDRS: CI_ADDR), go->neg_addr,
-	      go->old_addrs, go->ouraddr, go->hisaddr);
-
-    ACKCIVJ(CI_COMPRESSTYPE, go->neg_vj, go->vj_protocol, go->old_vj,
-	    go->maxslotindex, go->cflag);
-
-    ACKCIDNS(CI_MS_DNS1, go->req_dns1, go->dnsaddr[0]);
-
-    ACKCIDNS(CI_MS_DNS2, go->req_dns2, go->dnsaddr[1]);
-
-    /*
-     * If there are any remaining CIs, then this packet is bad.
-     */
-    if (len != 0)
-	goto bad;
-    return (1);
-
-bad:
-    IPCPDEBUG(("ipcp_ackci: received bad Ack!"));
-    return (0);
-}
-
-/*
- * ipcp_nakci - Peer has sent a NAK for some of our CIs.
- * This should not modify any state if the Nak is bad
- * or if IPCP is in the OPENED state.
- * Calback from fsm_rconfnakrej - Receive Configure-Nak or Configure-Reject.
- *
- * Returns:
- *	0 - Nak was bad.
- *	1 - Nak was good.
- */
-static int
-ipcp_nakci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-    u_char cimaxslotindex, cicflag;
-    u_char citype, cilen, *next;
-    u_short cishort;
-    u_int32_t ciaddr1, ciaddr2, l, cidnsaddr;
-    ipcp_options no;		/* options we've seen Naks for */
-    ipcp_options try;		/* options to request next time */
-
-    BZERO(&no, sizeof(no));
-    try = *go;
-
-    /*
-     * Any Nak'd CIs must be in exactly the same order that we sent.
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-#define NAKCIADDR(opt, neg, old, code) \
-    if (go->neg && \
-	len >= (cilen = (old? CILEN_ADDRS: CILEN_ADDR)) && \
-	p[1] == cilen && \
-	p[0] == opt) { \
-	len -= cilen; \
-	INCPTR(2, p); \
-	GETLONG(l, p); \
-	ciaddr1 = htonl(l); \
-	if (old) { \
-	    GETLONG(l, p); \
-	    ciaddr2 = htonl(l); \
-	    no.old_addrs = 1; \
-	} else \
-	    ciaddr2 = 0; \
-	no.neg = 1; \
-	code \
-    }
-
-#define NAKCIVJ(opt, neg, code) \
-    if (go->neg && \
-	((cilen = p[1]) == CILEN_COMPRESS || cilen == CILEN_VJ) && \
-	len >= cilen && \
-	p[0] == opt) { \
-	len -= cilen; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	no.neg = 1; \
-        code \
-    }
-
-#define NAKCIDNS(opt, neg, code) \
-    if (go->neg && \
-	((cilen = p[1]) == CILEN_ADDR) && \
-	len >= cilen && \
-	p[0] == opt) { \
-	len -= cilen; \
-	INCPTR(2, p); \
-	GETLONG(l, p); \
-	cidnsaddr = htonl(l); \
-	no.neg = 1; \
-	code \
-    }
-
-    /*
-     * Accept the peer's idea of {our,his} address, if different
-     * from our idea, only if the accept_{local,remote} flag is set.
-     */
-    NAKCIADDR((go->old_addrs? CI_ADDRS: CI_ADDR), neg_addr, go->old_addrs,
-	      if (go->accept_local && ciaddr1) { /* Do we know our address? */
-		  try.ouraddr = ciaddr1;
-	      }
-	      if (go->accept_remote && ciaddr2) { /* Does he know his? */
-		  try.hisaddr = ciaddr2;
-	      }
-	      );
-
-    /*
-     * Accept the peer's value of maxslotindex provided that it
-     * is less than what we asked for.  Turn off slot-ID compression
-     * if the peer wants.  Send old-style compress-type option if
-     * the peer wants.
-     */
-    NAKCIVJ(CI_COMPRESSTYPE, neg_vj,
-	    if (cilen == CILEN_VJ) {
-		GETCHAR(cimaxslotindex, p);
-		GETCHAR(cicflag, p);
-		if (cishort == IPCP_VJ_COMP) {
-		    try.old_vj = 0;
-		    if (cimaxslotindex < go->maxslotindex)
-			try.maxslotindex = cimaxslotindex;
-		    if (!cicflag)
-			try.cflag = 0;
-		} else {
-		    try.neg_vj = 0;
-		}
-	    } else {
-		if (cishort == IPCP_VJ_COMP || cishort == IPCP_VJ_COMP_OLD) {
-		    try.old_vj = 1;
-		    try.vj_protocol = cishort;
-		} else {
-		    try.neg_vj = 0;
-		}
-	    }
-	    );
-
-    NAKCIDNS(CI_MS_DNS1, req_dns1,
-	    try.dnsaddr[0] = cidnsaddr;
-	    );
-
-    NAKCIDNS(CI_MS_DNS2, req_dns2,
-	    try.dnsaddr[1] = cidnsaddr;
-	    );
-
-    /*
-     * There may be remaining CIs, if the peer is requesting negotiation
-     * on an option that we didn't include in our request packet.
-     * If they want to negotiate about IP addresses, we comply.
-     * If they want us to ask for compression, we refuse.
-     */
-    while (len > CILEN_VOID) {
-	GETCHAR(citype, p);
-	GETCHAR(cilen, p);
-	if( (len -= cilen) < 0 )
-	    goto bad;
-	next = p + cilen - 2;
-
-	switch (citype) {
-	case CI_COMPRESSTYPE:
-	    if (go->neg_vj || no.neg_vj ||
-		(cilen != CILEN_VJ && cilen != CILEN_COMPRESS))
-		goto bad;
-	    no.neg_vj = 1;
-	    break;
-	case CI_ADDRS:
-	    if ((go->neg_addr && go->old_addrs) || no.old_addrs
-		|| cilen != CILEN_ADDRS)
-		goto bad;
-	    try.neg_addr = 1;
-	    try.old_addrs = 1;
-	    GETLONG(l, p);
-	    ciaddr1 = htonl(l);
-	    if (ciaddr1 && go->accept_local)
-		try.ouraddr = ciaddr1;
-	    GETLONG(l, p);
-	    ciaddr2 = htonl(l);
-	    if (ciaddr2 && go->accept_remote)
-		try.hisaddr = ciaddr2;
-	    no.old_addrs = 1;
-	    break;
-	case CI_ADDR:
-	    if (go->neg_addr || no.neg_addr || cilen != CILEN_ADDR)
-		goto bad;
-	    try.old_addrs = 0;
-	    GETLONG(l, p);
-	    ciaddr1 = htonl(l);
-	    if (ciaddr1 && go->accept_local)
-		try.ouraddr = ciaddr1;
-	    if (try.ouraddr != 0)
-		try.neg_addr = 1;
-	    no.neg_addr = 1;
-	    break;
-	}
-	p = next;
-    }
-
-    /*
-     * OK, the Nak is good.  Now we can update state.
-     * If there are any remaining options, we ignore them.
-     */
-    if (f->state != OPENED)
-	*go = try;
-
-    return 1;
-
-bad:
-    IPCPDEBUG(("ipcp_nakci: received bad Nak!"));
-    return 0;
-}
-
-
-/*
- * ipcp_rejci - Reject some of our CIs.
- * Callback from fsm_rconfnakrej.
- */
-static int
-ipcp_rejci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-    u_char cimaxslotindex, ciflag, cilen;
-    u_short cishort;
-    u_int32_t cilong;
-    ipcp_options try;		/* options to request next time */
-
-    try = *go;
-    /*
-     * Any Rejected CIs must be in exactly the same order that we sent.
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-#define REJCIADDR(opt, neg, old, val1, val2) \
-    if (go->neg && \
-	len >= (cilen = old? CILEN_ADDRS: CILEN_ADDR) && \
-	p[1] == cilen && \
-	p[0] == opt) { \
-	u_int32_t l; \
-	len -= cilen; \
-	INCPTR(2, p); \
-	GETLONG(l, p); \
-	cilong = htonl(l); \
-	/* Check rejected value. */ \
-	if (cilong != val1) \
-	    goto bad; \
-	if (old) { \
-	    GETLONG(l, p); \
-	    cilong = htonl(l); \
-	    /* Check rejected value. */ \
-	    if (cilong != val2) \
-		goto bad; \
-	} \
-	try.neg = 0; \
-    }
-
-#define REJCIVJ(opt, neg, val, old, maxslot, cflag) \
-    if (go->neg && \
-	p[1] == (old? CILEN_COMPRESS : CILEN_VJ) && \
-	len >= p[1] && \
-	p[0] == opt) { \
-	len -= p[1]; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	/* Check rejected value. */  \
-	if (cishort != val) \
-	    goto bad; \
-	if (!old) { \
-	   GETCHAR(cimaxslotindex, p); \
-	   if (cimaxslotindex != maxslot) \
-	     goto bad; \
-	   GETCHAR(ciflag, p); \
-	   if (ciflag != cflag) \
-	     goto bad; \
-        } \
-	try.neg = 0; \
-     }
-
-#define REJCIDNS(opt, neg, dnsaddr) \
-    if (go->neg && \
-	((cilen = p[1]) == CILEN_ADDR) && \
-	len >= cilen && \
-	p[0] == opt) { \
-	u_int32_t l; \
-	len -= cilen; \
-	INCPTR(2, p); \
-	GETLONG(l, p); \
-	cilong = htonl(l); \
-	/* Check rejected value. */ \
-	if (cilong != dnsaddr) \
-	    goto bad; \
-	try.neg = 0; \
-    }
-
-
-    REJCIADDR((go->old_addrs? CI_ADDRS: CI_ADDR), neg_addr,
-	      go->old_addrs, go->ouraddr, go->hisaddr);
-
-    REJCIVJ(CI_COMPRESSTYPE, neg_vj, go->vj_protocol, go->old_vj,
-	    go->maxslotindex, go->cflag);
-
-    REJCIDNS(CI_MS_DNS1, req_dns1, go->dnsaddr[0]);
-
-    REJCIDNS(CI_MS_DNS2, req_dns2, go->dnsaddr[1]);
-
-    /*
-     * If there are any remaining CIs, then this packet is bad.
-     */
-    if (len != 0)
-	goto bad;
-    /*
-     * Now we can update state.
-     */
-    if (f->state != OPENED)
-	*go = try;
-    return 1;
-
-bad:
-    IPCPDEBUG(("ipcp_rejci: received bad Reject!"));
-    return 0;
-}
-
-
-/*
- * ipcp_reqci - Check the peer's requested CIs and send appropriate response.
- * Callback from fsm_rconfreq, Receive Configure Request
- *
- * Returns: CONFACK, CONFNAK or CONFREJ and input packet modified
- * appropriately.  If reject_if_disagree is non-zero, doesn't return
- * CONFNAK; returns CONFREJ if it can't return CONFACK.
- */
-static int
-ipcp_reqci(f, inp, len, reject_if_disagree)
-    fsm *f;
-    u_char *inp;		/* Requested CIs */
-    int *len;			/* Length of requested CIs */
-    int reject_if_disagree;
-{
-    ipcp_options *wo = &ipcp_wantoptions[f->unit];
-    ipcp_options *ho = &ipcp_hisoptions[f->unit];
-    ipcp_options *ao = &ipcp_allowoptions[f->unit];
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-    u_char *cip, *next;		/* Pointer to current and next CIs */
-    u_short cilen, citype;	/* Parsed len, type */
-    u_short cishort;		/* Parsed short value */
-    u_int32_t tl, ciaddr1, ciaddr2;/* Parsed address values */
-    int rc = CONFACK;		/* Final packet return code */
-    int orc;			/* Individual option return code */
-    u_char *p;			/* Pointer to next char to parse */
-    u_char *ucp = inp;		/* Pointer to current output char */
-    int l = *len;		/* Length left */
-    u_char maxslotindex, cflag;
-    int d;
-
-    /*
-     * Reset all his options.
-     */
-    BZERO(ho, sizeof(*ho));
-    
-    /*
-     * Process all his options.
-     */
-    next = inp;
-    while (l) {
-	orc = CONFACK;			/* Assume success */
-	cip = p = next;			/* Remember begining of CI */
-	if (l < 2 ||			/* Not enough data for CI header or */
-	    p[1] < 2 ||			/*  CI length too small or */
-	    p[1] > l) {			/*  CI length too big? */
-	    IPCPDEBUG(("ipcp_reqci: bad CI length!"));
-	    orc = CONFREJ;		/* Reject bad CI */
-	    cilen = l;			/* Reject till end of packet */
-	    l = 0;			/* Don't loop again */
-	    goto endswitch;
-	}
-	GETCHAR(citype, p);		/* Parse CI type */
-	GETCHAR(cilen, p);		/* Parse CI length */
-	l -= cilen;			/* Adjust remaining length */
-	next += cilen;			/* Step to next CI */
-
-	switch (citype) {		/* Check CI type */
-	case CI_ADDRS:
-	    if (!ao->neg_addr ||
-		cilen != CILEN_ADDRS) {	/* Check CI length */
-		orc = CONFREJ;		/* Reject CI */
-		break;
-	    }
-
-	    /*
-	     * If he has no address, or if we both have his address but
-	     * disagree about it, then NAK it with our idea.
-	     * In particular, if we don't know his address, but he does,
-	     * then accept it.
-	     */
-	    GETLONG(tl, p);		/* Parse source address (his) */
-	    ciaddr1 = htonl(tl);
-	    if (ciaddr1 != wo->hisaddr
-		&& (ciaddr1 == 0 || !wo->accept_remote)) {
-		orc = CONFNAK;
-		if (!reject_if_disagree) {
-		    DECPTR(sizeof(u_int32_t), p);
-		    tl = ntohl(wo->hisaddr);
-		    PUTLONG(tl, p);
-		}
-	    } else if (ciaddr1 == 0 && wo->hisaddr == 0) {
-		/*
-		 * If neither we nor he knows his address, reject the option.
-		 */
-		orc = CONFREJ;
-		wo->req_addr = 0;	/* don't NAK with 0.0.0.0 later */
-		break;
-	    }
-
-	    /*
-	     * If he doesn't know our address, or if we both have our address
-	     * but disagree about it, then NAK it with our idea.
-	     */
-	    GETLONG(tl, p);		/* Parse desination address (ours) */
-	    ciaddr2 = htonl(tl);
-	    if (ciaddr2 != wo->ouraddr) {
-		if (ciaddr2 == 0 || !wo->accept_local) {
-		    orc = CONFNAK;
-		    if (!reject_if_disagree) {
-			DECPTR(sizeof(u_int32_t), p);
-			tl = ntohl(wo->ouraddr);
-			PUTLONG(tl, p);
-		    }
-		} else {
-		    go->ouraddr = ciaddr2;	/* accept peer's idea */
-		}
-	    }
-
-	    ho->neg_addr = 1;
-	    ho->old_addrs = 1;
-	    ho->hisaddr = ciaddr1;
-	    ho->ouraddr = ciaddr2;
-	    break;
-
-	case CI_ADDR:
-	    if (!ao->neg_addr ||
-		cilen != CILEN_ADDR) {	/* Check CI length */
-		orc = CONFREJ;		/* Reject CI */
-		break;
-	    }
-
-	    /*
-	     * If he has no address, or if we both have his address but
-	     * disagree about it, then NAK it with our idea.
-	     * In particular, if we don't know his address, but he does,
-	     * then accept it.
-	     */
-	    GETLONG(tl, p);	/* Parse source address (his) */
-	    ciaddr1 = htonl(tl);
-	    if (ciaddr1 != wo->hisaddr
-		&& (ciaddr1 == 0 || !wo->accept_remote)) {
-		orc = CONFNAK;
-		if (!reject_if_disagree) {
-		    DECPTR(sizeof(u_int32_t), p);
-		    tl = ntohl(wo->hisaddr);
-		    PUTLONG(tl, p);
-		}
-	    } else if (ciaddr1 == 0 && wo->hisaddr == 0) {
-		/*
-		 * Don't ACK an address of 0.0.0.0 - reject it instead.
-		 */
-		orc = CONFREJ;
-		wo->req_addr = 0;	/* don't NAK with 0.0.0.0 later */
-		break;
-	    }
-	
-	    ho->neg_addr = 1;
-	    ho->hisaddr = ciaddr1;
-	    break;
-
-	case CI_MS_DNS1:
-	case CI_MS_DNS2:
-	    /* Microsoft primary or secondary DNS request */
-	    d = citype == CI_MS_DNS2;
-
-	    /* If we do not have a DNS address then we cannot send it */
-	    if (ao->dnsaddr[d] == 0 ||
-		cilen != CILEN_ADDR) {	/* Check CI length */
-		orc = CONFREJ;		/* Reject CI */
-		break;
-	    }
-	    GETLONG(tl, p);
-	    if (htonl(tl) != ao->dnsaddr[d]) {
-                DECPTR(sizeof(u_int32_t), p);
-		tl = ntohl(ao->dnsaddr[d]);
-		PUTLONG(tl, p);
-		orc = CONFNAK;
-            }
-            break;
-
-	case CI_MS_WINS1:
-	case CI_MS_WINS2:
-	    /* Microsoft primary or secondary WINS request */
-	    d = citype == CI_MS_WINS2;
-
-	    /* If we do not have a DNS address then we cannot send it */
-	    if (ao->winsaddr[d] == 0 ||
-		cilen != CILEN_ADDR) {	/* Check CI length */
-		orc = CONFREJ;		/* Reject CI */
-		break;
-	    }
-	    GETLONG(tl, p);
-	    if (htonl(tl) != ao->winsaddr[d]) {
-                DECPTR(sizeof(u_int32_t), p);
-		tl = ntohl(ao->winsaddr[d]);
-		PUTLONG(tl, p);
-		orc = CONFNAK;
-            }
-            break;
-	
-	case CI_COMPRESSTYPE:
-	    if (!ao->neg_vj ||
-		(cilen != CILEN_VJ && cilen != CILEN_COMPRESS)) {
-		orc = CONFREJ;
-		break;
-	    }
-	    GETSHORT(cishort, p);
-
-	    if (!(cishort == IPCP_VJ_COMP ||
-		  (cishort == IPCP_VJ_COMP_OLD && cilen == CILEN_COMPRESS))) {
-		orc = CONFREJ;
-		break;
-	    }
-
-	    ho->neg_vj = 1;
-	    ho->vj_protocol = cishort;
-	    if (cilen == CILEN_VJ) {
-		GETCHAR(maxslotindex, p);
-		if (maxslotindex > ao->maxslotindex) { 
-		    orc = CONFNAK;
-		    if (!reject_if_disagree){
-			DECPTR(1, p);
-			PUTCHAR(ao->maxslotindex, p);
-		    }
-		}
-		GETCHAR(cflag, p);
-		if (cflag && !ao->cflag) {
-		    orc = CONFNAK;
-		    if (!reject_if_disagree){
-			DECPTR(1, p);
-			PUTCHAR(wo->cflag, p);
-		    }
-		}
-		ho->maxslotindex = maxslotindex;
-		ho->cflag = cflag;
-	    } else {
-		ho->old_vj = 1;
-		ho->maxslotindex = MAX_STATES - 1;
-		ho->cflag = 1;
-	    }
-	    break;
-
-	default:
-	    orc = CONFREJ;
-	    break;
-	}
-endswitch:
-	if (orc == CONFACK &&		/* Good CI */
-	    rc != CONFACK)		/*  but prior CI wasnt? */
-	    continue;			/* Don't send this one */
-
-	if (orc == CONFNAK) {		/* Nak this CI? */
-	    if (reject_if_disagree)	/* Getting fed up with sending NAKs? */
-		orc = CONFREJ;		/* Get tough if so */
-	    else {
-		if (rc == CONFREJ)	/* Rejecting prior CI? */
-		    continue;		/* Don't send this one */
-		if (rc == CONFACK) {	/* Ack'd all prior CIs? */
-		    rc = CONFNAK;	/* Not anymore... */
-		    ucp = inp;		/* Backup */
-		}
-	    }
-	}
-
-	if (orc == CONFREJ &&		/* Reject this CI */
-	    rc != CONFREJ) {		/*  but no prior ones? */
-	    rc = CONFREJ;
-	    ucp = inp;			/* Backup */
-	}
-
-	/* Need to move CI? */
-	if (ucp != cip)
-	    BCOPY(cip, ucp, cilen);	/* Move it */
-
-	/* Update output pointer */
-	INCPTR(cilen, ucp);
-    }
-
-    /*
-     * If we aren't rejecting this packet, and we want to negotiate
-     * their address, and they didn't send their address, then we
-     * send a NAK with a CI_ADDR option appended.  We assume the
-     * input buffer is long enough that we can append the extra
-     * option safely.
-     */
-    if (rc != CONFREJ && !ho->neg_addr &&
-	wo->req_addr && !reject_if_disagree) {
-	if (rc == CONFACK) {
-	    rc = CONFNAK;
-	    ucp = inp;			/* reset pointer */
-	    wo->req_addr = 0;		/* don't ask again */
-	}
-	PUTCHAR(CI_ADDR, ucp);
-	PUTCHAR(CILEN_ADDR, ucp);
-	tl = ntohl(wo->hisaddr);
-	PUTLONG(tl, ucp);
-    }
-
-    *len = ucp - inp;			/* Compute output length */
-    IPCPDEBUG(("ipcp: returning Configure-%s", CODENAME(rc)));
-    return (rc);			/* Return final code */
-}
-
-
-/*
- * ip_check_options - check that any IP-related options are OK,
- * and assign appropriate defaults.
- */
-static void
-ip_check_options()
-{
-    struct hostent *hp;
-    u_int32_t local;
-    ipcp_options *wo = &ipcp_wantoptions[0];
-
-    /*
-     * Default our local IP address based on our hostname.
-     * If local IP address already given, don't bother.
-     */
-    if (wo->ouraddr == 0 && !disable_defaultip) {
-	/*
-	 * Look up our hostname (possibly with domain name appended)
-	 * and take the first IP address as our local IP address.
-	 * If there isn't an IP address for our hostname, too bad.
-	 */
-	wo->accept_local = 1;	/* don't insist on this default value */
-	if ((hp = gethostbyname(hostname)) != NULL) {
-	    local = *(u_int32_t *)hp->h_addr;
-	    if (local != 0 && !bad_ip_adrs(local))
-		wo->ouraddr = local;
-	}
-    }
-    ask_for_local = wo->ouraddr != 0 || !disable_defaultip;
-}
-
-
-/*
- * ip_demand_conf - configure the interface as though
- * IPCP were up, for use with dial-on-demand.
- */
-static int
-ip_demand_conf(u)
-    int u;
-{
-    ipcp_options *wo = &ipcp_wantoptions[u];
-
-    if (wo->hisaddr == 0) {
-	/* make up an arbitrary address for the peer */
-	wo->hisaddr = htonl(0x0a707070 + ifunit);
-	wo->accept_remote = 1;
-    }
-    if (wo->ouraddr == 0) {
-	/* make up an arbitrary address for us */
-	wo->ouraddr = htonl(0x0a404040 + ifunit);
-	wo->accept_local = 1;
-	ask_for_local = 0;	/* don't tell the peer this address */
-    }
-    if (!sifaddr(u, wo->ouraddr, wo->hisaddr, GetMask(wo->ouraddr)))
-	return 0;
-    if (!sifup(u))
-	return 0;
-    if (!sifnpmode(u, PPP_IP, NPMODE_QUEUE))
-	return 0;
-    if (wo->default_route)
-	if (sifdefaultroute(u, wo->ouraddr, wo->hisaddr))
-	    default_route_set[u] = 1;
-    if (wo->proxy_arp)
-	if (sifproxyarp(u, wo->hisaddr))
-	    proxy_arp_set[u] = 1;
-
-    notice("local  IP address %I", wo->ouraddr);
-    notice("remote IP address %I", wo->hisaddr);
-
-    return 1;
-}
-
-
-/*
- * ipcp_up - IPCP has come UP.
- *
- * Configure the IP network interface appropriately and bring it up.
- */
-static void
-ipcp_up(f)
-    fsm *f;
-{
-    u_int32_t mask;
-    ipcp_options *ho = &ipcp_hisoptions[f->unit];
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-    ipcp_options *wo = &ipcp_wantoptions[f->unit];
-
-    IPCPDEBUG(("ipcp: up"));
-
-    /*
-     * We must have a non-zero IP address for both ends of the link.
-     */
-    if (!ho->neg_addr)
-	ho->hisaddr = wo->hisaddr;
-
-    if (go->ouraddr == 0) {
-	error("Could not determine local IP address");
-	ipcp_close(f->unit, "Could not determine local IP address");
-	return;
-    }
-    if (ho->hisaddr == 0) {
-	ho->hisaddr = htonl(0x0a404040 + ifunit);
-	warn("Could not determine remote IP address: defaulting to %I",
-	     ho->hisaddr);
-    }
-    script_setenv("IPLOCAL", ip_ntoa(go->ouraddr), 0);
-    script_setenv("IPREMOTE", ip_ntoa(ho->hisaddr), 1);
-
-    if (usepeerdns && (go->dnsaddr[0] || go->dnsaddr[1])) {
-	script_setenv("USEPEERDNS", "1", 0);
-	if (go->dnsaddr[0])
-	    script_setenv("DNS1", ip_ntoa(go->dnsaddr[0]), 0);
-	if (go->dnsaddr[1])
-	    script_setenv("DNS2", ip_ntoa(go->dnsaddr[1]), 0);
-	create_resolv(go->dnsaddr[0], go->dnsaddr[1]);
-    }
-
-    /*
-     * Check that the peer is allowed to use the IP address it wants.
-     */
-    if (!auth_ip_addr(f->unit, ho->hisaddr)) {
-	error("Peer is not authorized to use remote address %I", ho->hisaddr);
-	ipcp_close(f->unit, "Unauthorized remote IP address");
-	return;
-    }
-
-    /* set tcp compression */
-    sifvjcomp(f->unit, ho->neg_vj, ho->cflag, ho->maxslotindex);
-
-    /*
-     * If we are doing dial-on-demand, the interface is already
-     * configured, so we put out any saved-up packets, then set the
-     * interface to pass IP packets.
-     */
-    if (demand) {
-	if (go->ouraddr != wo->ouraddr || ho->hisaddr != wo->hisaddr) {
-	    ipcp_clear_addrs(f->unit, wo->ouraddr, wo->hisaddr);
-	    if (go->ouraddr != wo->ouraddr) {
-		warn("Local IP address changed to %I", go->ouraddr);
-		script_setenv("OLDIPLOCAL", ip_ntoa(wo->ouraddr), 0);
-		wo->ouraddr = go->ouraddr;
-	    } else
-		script_unsetenv("OLDIPLOCAL");
-	    if (ho->hisaddr != wo->hisaddr) {
-		warn("Remote IP address changed to %I", ho->hisaddr);
-		script_setenv("OLDIPREMOTE", ip_ntoa(wo->hisaddr), 0);
-		wo->hisaddr = ho->hisaddr;
-	    } else
-		script_unsetenv("OLDIPREMOTE");
-
-	    /* Set the interface to the new addresses */
-	    mask = GetMask(go->ouraddr);
-	    if (!sifaddr(f->unit, go->ouraddr, ho->hisaddr, mask)) {
-		if (debug)
-		    warn("Interface configuration failed");
-		ipcp_close(f->unit, "Interface configuration failed");
-		return;
-	    }
-
-	    /* assign a default route through the interface if required */
-	    if (ipcp_wantoptions[f->unit].default_route) 
-		if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr))
-		    default_route_set[f->unit] = 1;
-
-	    /* Make a proxy ARP entry if requested. */
-	    if (ipcp_wantoptions[f->unit].proxy_arp)
-		if (sifproxyarp(f->unit, ho->hisaddr))
-		    proxy_arp_set[f->unit] = 1;
-
-	}
-	demand_rexmit(PPP_IP);
-	sifnpmode(f->unit, PPP_IP, NPMODE_PASS);
-
-    } else {
-	/*
-	 * Set IP addresses and (if specified) netmask.
-	 */
-	mask = GetMask(go->ouraddr);
-
-#if !(defined(SVR4) && (defined(SNI) || defined(__USLC__)))
-	if (!sifaddr(f->unit, go->ouraddr, ho->hisaddr, mask)) {
-	    if (debug)
-		warn("Interface configuration failed");
-	    ipcp_close(f->unit, "Interface configuration failed");
-	    return;
-	}
-#endif
-
-	/* bring the interface up for IP */
-	if (!sifup(f->unit)) {
-	    if (debug)
-		warn("Interface failed to come up");
-	    ipcp_close(f->unit, "Interface configuration failed");
-	    return;
-	}
-
-#if (defined(SVR4) && (defined(SNI) || defined(__USLC__)))
-	if (!sifaddr(f->unit, go->ouraddr, ho->hisaddr, mask)) {
-	    if (debug)
-		warn("Interface configuration failed");
-	    ipcp_close(f->unit, "Interface configuration failed");
-	    return;
-	}
-#endif
-	sifnpmode(f->unit, PPP_IP, NPMODE_PASS);
-
-	/* assign a default route through the interface if required */
-	if (ipcp_wantoptions[f->unit].default_route) 
-	    if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr))
-		default_route_set[f->unit] = 1;
-
-	/* Make a proxy ARP entry if requested. */
-	if (ipcp_wantoptions[f->unit].proxy_arp)
-	    if (sifproxyarp(f->unit, ho->hisaddr))
-		proxy_arp_set[f->unit] = 1;
-
-	ipcp_wantoptions[0].ouraddr = go->ouraddr;
-
-	notice("local  IP address %I", go->ouraddr);
-	notice("remote IP address %I", ho->hisaddr);
-	if (go->dnsaddr[0])
-	    notice("primary   DNS address %I", go->dnsaddr[0]);
-	if (go->dnsaddr[1])
-	    notice("secondary DNS address %I", go->dnsaddr[1]);
-    }
-
-    np_up(f->unit, PPP_IP);
-    ipcp_is_up = 1;
-
-    if (ip_up_hook)
-	ip_up_hook();
-
-    /*
-     * Execute the ip-up script, like this:
-     *	/etc/ppp/ip-up interface tty speed local-IP remote-IP
-     */
-    if (ipcp_script_state == s_down && ipcp_script_pid == 0) {
-	ipcp_script_state = s_up;
-	ipcp_script(_PATH_IPUP);
-    }
-}
-
-
-/*
- * ipcp_down - IPCP has gone DOWN.
- *
- * Take the IP network interface down, clear its addresses
- * and delete routes through it.
- */
-static void
-ipcp_down(f)
-    fsm *f;
-{
-    IPCPDEBUG(("ipcp: down"));
-    /* XXX a bit IPv4-centric here, we only need to get the stats
-     * before the interface is marked down. */
-    update_link_stats(f->unit);
-    if (ip_down_hook)
-	ip_down_hook();
-    if (ipcp_is_up) {
-	ipcp_is_up = 0;
-	np_down(f->unit, PPP_IP);
-    }
-    sifvjcomp(f->unit, 0, 0, 0);
-
-    /*
-     * If we are doing dial-on-demand, set the interface
-     * to queue up outgoing packets (for now).
-     */
-    if (demand) {
-	sifnpmode(f->unit, PPP_IP, NPMODE_QUEUE);
-    } else {
-	sifnpmode(f->unit, PPP_IP, NPMODE_DROP);
-	sifdown(f->unit);
-	ipcp_clear_addrs(f->unit, ipcp_gotoptions[f->unit].ouraddr,
-			 ipcp_hisoptions[f->unit].hisaddr);
-    }
-
-    /* Execute the ip-down script */
-    if (ipcp_script_state == s_up && ipcp_script_pid == 0) {
-	ipcp_script_state = s_down;
-	ipcp_script(_PATH_IPDOWN);
-    }
-}
-
-
-/*
- * ipcp_clear_addrs() - clear the interface addresses, routes,
- * proxy arp entries, etc.
- */
-static void
-ipcp_clear_addrs(unit, ouraddr, hisaddr)
-    int unit;
-    u_int32_t ouraddr;  /* local address */
-    u_int32_t hisaddr;  /* remote address */
-{
-    if (proxy_arp_set[unit]) {
-	cifproxyarp(unit, hisaddr);
-	proxy_arp_set[unit] = 0;
-    }
-    if (default_route_set[unit]) {
-	cifdefaultroute(unit, ouraddr, hisaddr);
-	default_route_set[unit] = 0;
-    }
-    cifaddr(unit, ouraddr, hisaddr);
-}
-
-
-/*
- * ipcp_finished - possibly shut down the lower layers.
- */
-static void
-ipcp_finished(f)
-    fsm *f;
-{
-    np_finished(f->unit, PPP_IP);
-}
-
-
-/*
- * ipcp_script_done - called when the ip-up or ip-down script
- * has finished.
- */
-static void
-ipcp_script_done(arg)
-    void *arg;
-{
-    ipcp_script_pid = 0;
-    switch (ipcp_script_state) {
-    case s_up:
-	if (ipcp_fsm[0].state != OPENED) {
-	    ipcp_script_state = s_down;
-	    ipcp_script(_PATH_IPDOWN);
-	}
-	break;
-    case s_down:
-	if (ipcp_fsm[0].state == OPENED) {
-	    ipcp_script_state = s_up;
-	    ipcp_script(_PATH_IPUP);
-	}
-	break;
-    }
-}
-
-
-/*
- * ipcp_script - Execute a script with arguments
- * interface-name tty-name speed local-IP remote-IP.
- */
-static void
-ipcp_script(script)
-    char *script;
-{
-    char strspeed[32], strlocal[32], strremote[32];
-    char *argv[8];
-
-    slprintf(strspeed, sizeof(strspeed), "%d", baud_rate);
-    slprintf(strlocal, sizeof(strlocal), "%I", ipcp_gotoptions[0].ouraddr);
-    slprintf(strremote, sizeof(strremote), "%I", ipcp_hisoptions[0].hisaddr);
-
-    argv[0] = script;
-    argv[1] = ifname;
-    argv[2] = devnam;
-    argv[3] = strspeed;
-    argv[4] = strlocal;
-    argv[5] = strremote;
-    argv[6] = ipparam;
-    argv[7] = NULL;
-    ipcp_script_pid = run_program(script, argv, 0, ipcp_script_done, NULL);
-}
-
-/*
- * create_resolv - create the replacement resolv.conf file
- */
-static void
-create_resolv(peerdns1, peerdns2)
-    u_int32_t peerdns1, peerdns2;
-{
-    FILE *f;
-
-    f = fopen(_PATH_RESOLV, "w");
-    if (f == NULL) {
-	error("Failed to create %s: %m", _PATH_RESOLV);
-	return;
-    }
-
-    if (peerdns1)
-	fprintf(f, "nameserver %s\n", ip_ntoa(peerdns1));
-
-    if (peerdns2)
-	fprintf(f, "nameserver %s\n", ip_ntoa(peerdns2));
-
-    if (ferror(f))
-	error("Write failed to %s: %m", _PATH_RESOLV);
-
-    fclose(f);
-}
-
-/*
- * ipcp_printpkt - print the contents of an IPCP packet.
- */
-static char *ipcp_codenames[] = {
-    "ConfReq", "ConfAck", "ConfNak", "ConfRej",
-    "TermReq", "TermAck", "CodeRej"
-};
-
-static int
-ipcp_printpkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int code, id, len, olen;
-    u_char *pstart, *optend;
-    u_short cishort;
-    u_int32_t cilong;
-
-    if (plen < HEADERLEN)
-	return 0;
-    pstart = p;
-    GETCHAR(code, p);
-    GETCHAR(id, p);
-    GETSHORT(len, p);
-    if (len < HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(ipcp_codenames) / sizeof(char *))
-	printer(arg, " %s", ipcp_codenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code);
-    printer(arg, " id=0x%x", id);
-    len -= HEADERLEN;
-    switch (code) {
-    case CONFREQ:
-    case CONFACK:
-    case CONFNAK:
-    case CONFREJ:
-	/* print option list */
-	while (len >= 2) {
-	    GETCHAR(code, p);
-	    GETCHAR(olen, p);
-	    p -= 2;
-	    if (olen < 2 || olen > len) {
-		break;
-	    }
-	    printer(arg, " <");
-	    len -= olen;
-	    optend = p + olen;
-	    switch (code) {
-	    case CI_ADDRS:
-		if (olen == CILEN_ADDRS) {
-		    p += 2;
-		    GETLONG(cilong, p);
-		    printer(arg, "addrs %I", htonl(cilong));
-		    GETLONG(cilong, p);
-		    printer(arg, " %I", htonl(cilong));
-		}
-		break;
-	    case CI_COMPRESSTYPE:
-		if (olen >= CILEN_COMPRESS) {
-		    p += 2;
-		    GETSHORT(cishort, p);
-		    printer(arg, "compress ");
-		    switch (cishort) {
-		    case IPCP_VJ_COMP:
-			printer(arg, "VJ");
-			break;
-		    case IPCP_VJ_COMP_OLD:
-			printer(arg, "old-VJ");
-			break;
-		    default:
-			printer(arg, "0x%x", cishort);
-		    }
-		}
-		break;
-	    case CI_ADDR:
-		if (olen == CILEN_ADDR) {
-		    p += 2;
-		    GETLONG(cilong, p);
-		    printer(arg, "addr %I", htonl(cilong));
-		}
-		break;
-	    case CI_MS_DNS1:
-	    case CI_MS_DNS2:
-	        p += 2;
-		GETLONG(cilong, p);
-		printer(arg, "ms-dns%d %I", code - CI_MS_DNS1 + 1,
-			htonl(cilong));
-		break;
-	    case CI_MS_WINS1:
-	    case CI_MS_WINS2:
-	        p += 2;
-		GETLONG(cilong, p);
-		printer(arg, "ms-wins %I", htonl(cilong));
-		break;
-	    }
-	    while (p < optend) {
-		GETCHAR(code, p);
-		printer(arg, " %.2x", code);
-	    }
-	    printer(arg, ">");
-	}
-	break;
-
-    case TERMACK:
-    case TERMREQ:
-	if (len > 0 && *p >= ' ' && *p < 0x7f) {
-	    printer(arg, " ");
-	    print_string((char *)p, len, printer, arg);
-	    p += len;
-	    len = 0;
-	}
-	break;
-    }
-
-    /* print the rest of the bytes in the packet */
-    for (; len > 0; --len) {
-	GETCHAR(code, p);
-	printer(arg, " %.2x", code);
-    }
-
-    return p - pstart;
-}
-
-/*
- * ip_active_pkt - see if this IP packet is worth bringing the link up for.
- * We don't bring the link up for IP fragments or for TCP FIN packets
- * with no data.
- */
-#define IP_HDRLEN	20	/* bytes */
-#define IP_OFFMASK	0x1fff
-// #define IPPROTO_TCP	6
-#define TCP_HDRLEN	20
-#define TH_FIN		0x01
-
-/*
- * We use these macros because the IP header may be at an odd address,
- * and some compilers might use word loads to get th_off or ip_hl.
- */
-
-#define net_short(x)	(((x)[0] << 8) + (x)[1])
-#define get_iphl(x)	(((unsigned char *)(x))[0] & 0xF)
-#define get_ipoff(x)	net_short((unsigned char *)(x) + 6)
-#define get_ipproto(x)	(((unsigned char *)(x))[9])
-#define get_tcpoff(x)	(((unsigned char *)(x))[12] >> 4)
-#define get_tcpflags(x)	(((unsigned char *)(x))[13])
-
-static int
-ip_active_pkt(pkt, len)
-    u_char *pkt;
-    int len;
-{
-    u_char *tcp;
-    int hlen;
-
-    len -= PPP_HDRLEN;
-    pkt += PPP_HDRLEN;
-    if (len < IP_HDRLEN)
-	return 0;
-    if ((get_ipoff(pkt) & IP_OFFMASK) != 0)
-	return 0;
-    if (get_ipproto(pkt) != IPPROTO_TCP)
-	return 1;
-    hlen = get_iphl(pkt) * 4;
-    if (len < hlen + TCP_HDRLEN)
-	return 0;
-    tcp = pkt + hlen;
-    if ((get_tcpflags(tcp) & TH_FIN) != 0 && len == hlen + get_tcpoff(tcp) * 4)
-	return 0;
-    return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/ipcp.h b/mdk-stage1/ppp/pppd/ipcp.h
deleted file mode 100644
index 8c5aca861..000000000
--- a/mdk-stage1/ppp/pppd/ipcp.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * ipcp.h - IP Control Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Options.
- */
-#define CI_ADDRS	1	/* IP Addresses */
-#define CI_COMPRESSTYPE	2	/* Compression Type */
-#define	CI_ADDR		3
-
-#define CI_MS_DNS1	129	/* Primary DNS value */
-#define CI_MS_WINS1	130	/* Primary WINS value */
-#define CI_MS_DNS2	131	/* Secondary DNS value */
-#define CI_MS_WINS2	132	/* Secondary WINS value */
-
-#define MAX_STATES 16		/* from slcompress.h */
-
-#define IPCP_VJMODE_OLD 1	/* "old" mode (option # = 0x0037) */
-#define IPCP_VJMODE_RFC1172 2	/* "old-rfc"mode (option # = 0x002d) */
-#define IPCP_VJMODE_RFC1332 3	/* "new-rfc"mode (option # = 0x002d, */
-                                /*  maxslot and slot number compression) */
-
-#define IPCP_VJ_COMP 0x002d	/* current value for VJ compression option*/
-#define IPCP_VJ_COMP_OLD 0x0037	/* "old" (i.e, broken) value for VJ */
-				/* compression option*/ 
-
-typedef struct ipcp_options {
-    bool neg_addr;		/* Negotiate IP Address? */
-    bool old_addrs;		/* Use old (IP-Addresses) option? */
-    bool req_addr;		/* Ask peer to send IP address? */
-    bool default_route;		/* Assign default route through interface? */
-    bool proxy_arp;		/* Make proxy ARP entry for peer? */
-    bool neg_vj;		/* Van Jacobson Compression? */
-    bool old_vj;		/* use old (short) form of VJ option? */
-    bool accept_local;		/* accept peer's value for ouraddr */
-    bool accept_remote;		/* accept peer's value for hisaddr */
-    bool req_dns1;		/* Ask peer to send primary DNS address? */
-    bool req_dns2;		/* Ask peer to send secondary DNS address? */
-    int  vj_protocol;		/* protocol value to use in VJ option */
-    int  maxslotindex;		/* values for RFC1332 VJ compression neg. */
-    bool cflag;
-    u_int32_t ouraddr, hisaddr;	/* Addresses in NETWORK BYTE ORDER */
-    u_int32_t dnsaddr[2];	/* Primary and secondary MS DNS entries */
-    u_int32_t winsaddr[2];	/* Primary and secondary MS WINS entries */
-} ipcp_options;
-
-extern fsm ipcp_fsm[];
-extern ipcp_options ipcp_wantoptions[];
-extern ipcp_options ipcp_gotoptions[];
-extern ipcp_options ipcp_allowoptions[];
-extern ipcp_options ipcp_hisoptions[];
-
-char *ip_ntoa __P((u_int32_t));
-
-extern struct protent ipcp_protent;
diff --git a/mdk-stage1/ppp/pppd/ipv6cp.c b/mdk-stage1/ppp/pppd/ipv6cp.c
deleted file mode 100644
index 54ff7d7d8..000000000
--- a/mdk-stage1/ppp/pppd/ipv6cp.c
+++ /dev/null
@@ -1,1512 +0,0 @@
-/*
-    ipv6cp.c - PPP IPV6 Control Protocol.
-    Copyright (C) 1999  Tommi Komulainen <Tommi.Komulainen@iki.fi>
-
-    Redistribution and use in source and binary forms are permitted
-    provided that the above copyright notice and this paragraph are
-    duplicated in all such forms.  The name of the author may not be
-    used to endorse or promote products derived from this software
-    without specific prior written permission.
-    THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-    IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-    WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-*/
-
-/*  Original version, based on RFC2023 :
-
-    Copyright (c) 1995, 1996, 1997 Francis.Dupont@inria.fr, INRIA Rocquencourt,
-    Alain.Durand@imag.fr, IMAG,
-    Jean-Luc.Richier@imag.fr, IMAG-LSR.
-
-    Copyright (c) 1998, 1999 Francis.Dupont@inria.fr, GIE DYADE,
-    Alain.Durand@imag.fr, IMAG,
-    Jean-Luc.Richier@imag.fr, IMAG-LSR.
-
-    Ce travail a �t� fait au sein du GIE DYADE (Groupement d'Int�r�t
-    �conomique ayant pour membres BULL S.A. et l'INRIA).
-
-    Ce logiciel informatique est disponible aux conditions
-    usuelles dans la recherche, c'est-�-dire qu'il peut
-    �tre utilis�, copi�, modifi�, distribu� � l'unique
-    condition que ce texte soit conserv� afin que
-    l'origine de ce logiciel soit reconnue.
-
-    Le nom de l'Institut National de Recherche en Informatique
-    et en Automatique (INRIA), de l'IMAG, ou d'une personne morale
-    ou physique ayant particip� � l'�laboration de ce logiciel ne peut
-    �tre utilis� sans son accord pr�alable explicite.
-
-    Ce logiciel est fourni tel quel sans aucune garantie,
-    support ou responsabilit� d'aucune sorte.
-    Ce logiciel est d�riv� de sources d'origine
-    "University of California at Berkeley" et
-    "Digital Equipment Corporation" couvertes par des copyrights.
-
-    L'Institut d'Informatique et de Math�matiques Appliqu�es de Grenoble (IMAG)
-    est une f�d�ration d'unit�s mixtes de recherche du CNRS, de l'Institut National
-    Polytechnique de Grenoble et de l'Universit� Joseph Fourier regroupant
-    sept laboratoires dont le laboratoire Logiciels, Syst�mes, R�seaux (LSR).
-
-    This work has been done in the context of GIE DYADE (joint R & D venture
-    between BULL S.A. and INRIA).
-
-    This software is available with usual "research" terms
-    with the aim of retain credits of the software. 
-    Permission to use, copy, modify and distribute this software for any
-    purpose and without fee is hereby granted, provided that the above
-    copyright notice and this permission notice appear in all copies,
-    and the name of INRIA, IMAG, or any contributor not be used in advertising
-    or publicity pertaining to this material without the prior explicit
-    permission. The software is provided "as is" without any
-    warranties, support or liabilities of any kind.
-    This software is derived from source code from
-    "University of California at Berkeley" and
-    "Digital Equipment Corporation" protected by copyrights.
-
-    Grenoble's Institute of Computer Science and Applied Mathematics (IMAG)
-    is a federation of seven research units funded by the CNRS, National
-    Polytechnic Institute of Grenoble and University Joseph Fourier.
-    The research unit in Software, Systems, Networks (LSR) is member of IMAG.
-*/
-
-/*
- * Derived from :
- *
- *
- * ipcp.c - PPP IP Control Protocol.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$ 
- */
-
-#define RCSID	"$Id$"
-
-/*
- * TODO: 
- *
- * Proxy Neighbour Discovery.
- *
- * Better defines for selecting the ordering of
- *   interface up / set address. (currently checks for __linux__,
- *   since SVR4 && (SNI || __USLC__) didn't work properly)
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-#include <netdb.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipcp.h"
-#include "ipv6cp.h"
-#include "magic.h"
-#include "pathnames.h"
-
-static const char rcsid[] = RCSID;
-
-/* global vars */
-ipv6cp_options ipv6cp_wantoptions[NUM_PPP];     /* Options that we want to request */
-ipv6cp_options ipv6cp_gotoptions[NUM_PPP];	/* Options that peer ack'd */
-ipv6cp_options ipv6cp_allowoptions[NUM_PPP];	/* Options we allow peer to request */
-ipv6cp_options ipv6cp_hisoptions[NUM_PPP];	/* Options that we ack'd */
-int no_ifaceid_neg = 0;
-
-/* local vars */
-static int ipv6cp_is_up;
-
-/*
- * Callbacks for fsm code.  (CI = Configuration Information)
- */
-static void ipv6cp_resetci __P((fsm *));	/* Reset our CI */
-static int  ipv6cp_cilen __P((fsm *));	        /* Return length of our CI */
-static void ipv6cp_addci __P((fsm *, u_char *, int *)); /* Add our CI */
-static int  ipv6cp_ackci __P((fsm *, u_char *, int));	/* Peer ack'd our CI */
-static int  ipv6cp_nakci __P((fsm *, u_char *, int));	/* Peer nak'd our CI */
-static int  ipv6cp_rejci __P((fsm *, u_char *, int));	/* Peer rej'd our CI */
-static int  ipv6cp_reqci __P((fsm *, u_char *, int *, int)); /* Rcv CI */
-static void ipv6cp_up __P((fsm *));		/* We're UP */
-static void ipv6cp_down __P((fsm *));		/* We're DOWN */
-static void ipv6cp_finished __P((fsm *));	/* Don't need lower layer */
-
-fsm ipv6cp_fsm[NUM_PPP];		/* IPV6CP fsm structure */
-
-static fsm_callbacks ipv6cp_callbacks = { /* IPV6CP callback routines */
-    ipv6cp_resetci,		/* Reset our Configuration Information */
-    ipv6cp_cilen,		/* Length of our Configuration Information */
-    ipv6cp_addci,		/* Add our Configuration Information */
-    ipv6cp_ackci,		/* ACK our Configuration Information */
-    ipv6cp_nakci,		/* NAK our Configuration Information */
-    ipv6cp_rejci,		/* Reject our Configuration Information */
-    ipv6cp_reqci,		/* Request peer's Configuration Information */
-    ipv6cp_up,			/* Called when fsm reaches OPENED state */
-    ipv6cp_down,		/* Called when fsm leaves OPENED state */
-    NULL,			/* Called when we want the lower layer up */
-    ipv6cp_finished,		/* Called when we want the lower layer down */
-    NULL,			/* Called when Protocol-Reject received */
-    NULL,			/* Retransmission is necessary */
-    NULL,			/* Called to handle protocol-specific codes */
-    "IPV6CP"			/* String name of protocol */
-};
-
-/*
- * Command-line options.
- */
-static int setifaceid __P((char **arg));
-static void printifaceid __P((option_t *,
-			      void (*)(void *, char *, ...), void *));
-
-static option_t ipv6cp_option_list[] = {
-    { "ipv6", o_special, (void *)setifaceid,
-      "Set interface identifiers for IPV6",
-      OPT_A2PRINTER, (void *)printifaceid },
-
-    { "+ipv6", o_bool, &ipv6cp_protent.enabled_flag,
-      "Enable IPv6 and IPv6CP", OPT_PRIO | 1 },
-    { "noipv6", o_bool, &ipv6cp_protent.enabled_flag,
-      "Disable IPv6 and IPv6CP", OPT_PRIOSUB },
-    { "-ipv6", o_bool, &ipv6cp_protent.enabled_flag,
-      "Disable IPv6 and IPv6CP", OPT_PRIOSUB | OPT_ALIAS },
-
-    { "ipv6cp-accept-local", o_bool, &ipv6cp_allowoptions[0].accept_local,
-      "Accept peer's interface identifier for us", 1 },
-
-    { "ipv6cp-use-ipaddr", o_bool, &ipv6cp_allowoptions[0].use_ip,
-      "Use (default) IPv4 address as interface identifier", 1 },
-
-#if defined(SOL2)
-    { "ipv6cp-use-persistent", o_bool, &ipv6cp_wantoptions[0].use_persistent,
-      "Use uniquely-available persistent value for link local address", 1 },
-#endif /* defined(SOL2) */
-
-    { "ipv6cp-restart", o_int, &ipv6cp_fsm[0].timeouttime,
-      "Set timeout for IPv6CP", OPT_PRIO },
-    { "ipv6cp-max-terminate", o_int, &ipv6cp_fsm[0].maxtermtransmits,
-      "Set max #xmits for term-reqs", OPT_PRIO },
-    { "ipv6cp-max-configure", o_int, &ipv6cp_fsm[0].maxconfreqtransmits,
-      "Set max #xmits for conf-reqs", OPT_PRIO },
-    { "ipv6cp-max-failure", o_int, &ipv6cp_fsm[0].maxnakloops,
-      "Set max #conf-naks for IPv6CP", OPT_PRIO },
-
-   { NULL }
-};
-
-
-/*
- * Protocol entry points from main code.
- */
-static void ipv6cp_init __P((int));
-static void ipv6cp_open __P((int));
-static void ipv6cp_close __P((int, char *));
-static void ipv6cp_lowerup __P((int));
-static void ipv6cp_lowerdown __P((int));
-static void ipv6cp_input __P((int, u_char *, int));
-static void ipv6cp_protrej __P((int));
-static int  ipv6cp_printpkt __P((u_char *, int,
-			       void (*) __P((void *, char *, ...)), void *));
-static void ipv6_check_options __P((void));
-static int  ipv6_demand_conf __P((int));
-static int  ipv6_active_pkt __P((u_char *, int));
-
-struct protent ipv6cp_protent = {
-    PPP_IPV6CP,
-    ipv6cp_init,
-    ipv6cp_input,
-    ipv6cp_protrej,
-    ipv6cp_lowerup,
-    ipv6cp_lowerdown,
-    ipv6cp_open,
-    ipv6cp_close,
-    ipv6cp_printpkt,
-    NULL,
-    0,
-    "IPV6CP",
-    "IPV6",
-    ipv6cp_option_list,
-    ipv6_check_options,
-    ipv6_demand_conf,
-    ipv6_active_pkt
-};
-
-static void ipv6cp_clear_addrs __P((int, eui64_t, eui64_t));
-static void ipv6cp_script __P((char *));
-static void ipv6cp_script_done __P((void *));
-
-/*
- * Lengths of configuration options.
- */
-#define CILEN_VOID	2
-#define CILEN_COMPRESS	4	/* length for RFC2023 compress opt. */
-#define CILEN_IFACEID   10	/* RFC2472, interface identifier    */
-
-#define CODENAME(x)	((x) == CONFACK ? "ACK" : \
-			 (x) == CONFNAK ? "NAK" : "REJ")
-
-/*
- * This state variable is used to ensure that we don't
- * run an ipcp-up/down script while one is already running.
- */
-static enum script_state {
-    s_down,
-    s_up,
-} ipv6cp_script_state;
-static pid_t ipv6cp_script_pid;
-
-/*
- * setifaceid - set the interface identifiers manually
- */
-static int
-setifaceid(argv)
-    char **argv;
-{
-    char *comma, *arg, c;
-    ipv6cp_options *wo = &ipv6cp_wantoptions[0];
-    struct in6_addr addr;
-    static int prio_local, prio_remote;
-
-#define VALIDID(a) ( (((a).s6_addr32[0] == 0) && ((a).s6_addr32[1] == 0)) && \
-			(((a).s6_addr32[2] != 0) || ((a).s6_addr32[3] != 0)) )
-    
-    arg = *argv;
-    if ((comma = strchr(arg, ',')) == NULL)
-	comma = arg + strlen(arg);
-    
-    /* 
-     * If comma first character, then no local identifier
-     */
-    if (comma != arg) {
-	c = *comma;
-	*comma = '\0';
-
-	if (inet_pton(AF_INET6, arg, &addr) == 0 || !VALIDID(addr)) {
-	    option_error("Illegal interface identifier (local): %s", arg);
-	    return 0;
-	}
-
-	if (option_priority >= prio_local) {
-	    eui64_copy(addr.s6_addr32[2], wo->ourid);
-	    wo->opt_local = 1;
-	    prio_local = option_priority;
-	}
-	*comma = c;
-    }
-    
-    /*
-     * If comma last character, the no remote identifier
-     */
-    if (*comma != 0 && *++comma != '\0') {
-	if (inet_pton(AF_INET6, comma, &addr) == 0 || !VALIDID(addr)) {
-	    option_error("Illegal interface identifier (remote): %s", comma);
-	    return 0;
-	}
-	if (option_priority >= prio_remote) {
-	    eui64_copy(addr.s6_addr32[2], wo->hisid);
-	    wo->opt_remote = 1;
-	    prio_remote = option_priority;
-	}
-    }
-
-    if (override_value("+ipv6", option_priority, option_source))
-	ipv6cp_protent.enabled_flag = 1;
-    return 1;
-}
-
-static void
-printifaceid(opt, printer, arg)
-    option_t *opt;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	ipv6cp_options *wo = &ipv6cp_wantoptions[0];
-
-	if (wo->opt_local)
-		printer(arg, "%s", llv6_ntoa(wo->ourid));
-	printer(arg, ",");
-	if (wo->opt_remote)
-		printer(arg, "%s", llv6_ntoa(wo->hisid));
-}
-
-/*
- * Make a string representation of a network address.
- */
-char *
-llv6_ntoa(ifaceid)
-    eui64_t ifaceid;
-{
-    static char b[64];
-
-    sprintf(b, "fe80::%s", eui64_ntoa(ifaceid));
-    return b;
-}
-
-
-/*
- * ipv6cp_init - Initialize IPV6CP.
- */
-static void
-ipv6cp_init(unit)
-    int unit;
-{
-    fsm *f = &ipv6cp_fsm[unit];
-    ipv6cp_options *wo = &ipv6cp_wantoptions[unit];
-    ipv6cp_options *ao = &ipv6cp_allowoptions[unit];
-
-    f->unit = unit;
-    f->protocol = PPP_IPV6CP;
-    f->callbacks = &ipv6cp_callbacks;
-    fsm_init(&ipv6cp_fsm[unit]);
-
-    memset(wo, 0, sizeof(*wo));
-    memset(ao, 0, sizeof(*ao));
-
-    wo->accept_local = 1;
-    wo->neg_ifaceid = 1;
-    ao->neg_ifaceid = 1;
-
-#ifdef IPV6CP_COMP
-    wo->neg_vj = 1;
-    ao->neg_vj = 1;
-    wo->vj_protocol = IPV6CP_COMP;
-#endif
-
-}
-
-
-/*
- * ipv6cp_open - IPV6CP is allowed to come up.
- */
-static void
-ipv6cp_open(unit)
-    int unit;
-{
-    fsm_open(&ipv6cp_fsm[unit]);
-}
-
-
-/*
- * ipv6cp_close - Take IPV6CP down.
- */
-static void
-ipv6cp_close(unit, reason)
-    int unit;
-    char *reason;
-{
-    fsm_close(&ipv6cp_fsm[unit], reason);
-}
-
-
-/*
- * ipv6cp_lowerup - The lower layer is up.
- */
-static void
-ipv6cp_lowerup(unit)
-    int unit;
-{
-    fsm_lowerup(&ipv6cp_fsm[unit]);
-}
-
-
-/*
- * ipv6cp_lowerdown - The lower layer is down.
- */
-static void
-ipv6cp_lowerdown(unit)
-    int unit;
-{
-    fsm_lowerdown(&ipv6cp_fsm[unit]);
-}
-
-
-/*
- * ipv6cp_input - Input IPV6CP packet.
- */
-static void
-ipv6cp_input(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    fsm_input(&ipv6cp_fsm[unit], p, len);
-}
-
-
-/*
- * ipv6cp_protrej - A Protocol-Reject was received for IPV6CP.
- *
- * Pretend the lower layer went down, so we shut up.
- */
-static void
-ipv6cp_protrej(unit)
-    int unit;
-{
-    fsm_lowerdown(&ipv6cp_fsm[unit]);
-}
-
-
-/*
- * ipv6cp_resetci - Reset our CI.
- */
-static void
-ipv6cp_resetci(f)
-    fsm *f;
-{
-    ipv6cp_options *wo = &ipv6cp_wantoptions[f->unit];
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-
-    wo->req_ifaceid = wo->neg_ifaceid && ipv6cp_allowoptions[f->unit].neg_ifaceid;
-    
-    if (!wo->opt_local) {
-	eui64_magic_nz(wo->ourid);
-    }
-    
-    *go = *wo;
-    eui64_zero(go->hisid);	/* last proposed interface identifier */
-}
-
-
-/*
- * ipv6cp_cilen - Return length of our CI.
- */
-static int
-ipv6cp_cilen(f)
-    fsm *f;
-{
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-
-#define LENCIVJ(neg)		(neg ? CILEN_COMPRESS : 0)
-#define LENCIIFACEID(neg)	(neg ? CILEN_IFACEID : 0)
-
-    return (LENCIIFACEID(go->neg_ifaceid) +
-	    LENCIVJ(go->neg_vj));
-}
-
-
-/*
- * ipv6cp_addci - Add our desired CIs to a packet.
- */
-static void
-ipv6cp_addci(f, ucp, lenp)
-    fsm *f;
-    u_char *ucp;
-    int *lenp;
-{
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-    int len = *lenp;
-
-#define ADDCIVJ(opt, neg, val) \
-    if (neg) { \
-	int vjlen = CILEN_COMPRESS; \
-	if (len >= vjlen) { \
-	    PUTCHAR(opt, ucp); \
-	    PUTCHAR(vjlen, ucp); \
-	    PUTSHORT(val, ucp); \
-	    len -= vjlen; \
-	} else \
-	    neg = 0; \
-    }
-
-#define ADDCIIFACEID(opt, neg, val1) \
-    if (neg) { \
-	int idlen = CILEN_IFACEID; \
-	if (len >= idlen) { \
-	    PUTCHAR(opt, ucp); \
-	    PUTCHAR(idlen, ucp); \
-	    eui64_put(val1, ucp); \
-	    len -= idlen; \
-	} else \
-	    neg = 0; \
-    }
-
-    ADDCIIFACEID(CI_IFACEID, go->neg_ifaceid, go->ourid);
-
-    ADDCIVJ(CI_COMPRESSTYPE, go->neg_vj, go->vj_protocol);
-
-    *lenp -= len;
-}
-
-
-/*
- * ipv6cp_ackci - Ack our CIs.
- *
- * Returns:
- *	0 - Ack was bad.
- *	1 - Ack was good.
- */
-static int
-ipv6cp_ackci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-    u_short cilen, citype, cishort;
-    eui64_t ifaceid;
-
-    /*
-     * CIs must be in exactly the same order that we sent...
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-
-#define ACKCIVJ(opt, neg, val) \
-    if (neg) { \
-	int vjlen = CILEN_COMPRESS; \
-	if ((len -= vjlen) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != vjlen || \
-	    citype != opt)  \
-	    goto bad; \
-	GETSHORT(cishort, p); \
-	if (cishort != val) \
-	    goto bad; \
-    }
-
-#define ACKCIIFACEID(opt, neg, val1) \
-    if (neg) { \
-	int idlen = CILEN_IFACEID; \
-	if ((len -= idlen) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != idlen || \
-	    citype != opt) \
-	    goto bad; \
-	eui64_get(ifaceid, p); \
-	if (! eui64_equals(val1, ifaceid)) \
-	    goto bad; \
-    }
-
-    ACKCIIFACEID(CI_IFACEID, go->neg_ifaceid, go->ourid);
-
-    ACKCIVJ(CI_COMPRESSTYPE, go->neg_vj, go->vj_protocol);
-
-    /*
-     * If there are any remaining CIs, then this packet is bad.
-     */
-    if (len != 0)
-	goto bad;
-    return (1);
-
-bad:
-    IPV6CPDEBUG(("ipv6cp_ackci: received bad Ack!"));
-    return (0);
-}
-
-/*
- * ipv6cp_nakci - Peer has sent a NAK for some of our CIs.
- * This should not modify any state if the Nak is bad
- * or if IPV6CP is in the OPENED state.
- *
- * Returns:
- *	0 - Nak was bad.
- *	1 - Nak was good.
- */
-static int
-ipv6cp_nakci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-    u_char citype, cilen, *next;
-    u_short cishort;
-    eui64_t ifaceid;
-    ipv6cp_options no;		/* options we've seen Naks for */
-    ipv6cp_options try;		/* options to request next time */
-
-    BZERO(&no, sizeof(no));
-    try = *go;
-
-    /*
-     * Any Nak'd CIs must be in exactly the same order that we sent.
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-#define NAKCIIFACEID(opt, neg, code) \
-    if (go->neg && \
-	len >= (cilen = CILEN_IFACEID) && \
-	p[1] == cilen && \
-	p[0] == opt) { \
-	len -= cilen; \
-	INCPTR(2, p); \
-	eui64_get(ifaceid, p); \
-	no.neg = 1; \
-	code \
-    }
-
-#define NAKCIVJ(opt, neg, code) \
-    if (go->neg && \
-	((cilen = p[1]) == CILEN_COMPRESS) && \
-	len >= cilen && \
-	p[0] == opt) { \
-	len -= cilen; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	no.neg = 1; \
-        code \
-    }
-
-    /*
-     * Accept the peer's idea of {our,his} interface identifier, if different
-     * from our idea, only if the accept_{local,remote} flag is set.
-     */
-    NAKCIIFACEID(CI_IFACEID, neg_ifaceid,
-	      if (go->accept_local) {
-		  while (eui64_iszero(ifaceid) || 
-			 eui64_equals(ifaceid, go->hisid)) /* bad luck */
-		      eui64_magic(ifaceid);
-		  try.ourid = ifaceid;
-		  IPV6CPDEBUG(("local LL address %s", llv6_ntoa(ifaceid)));
-	      }
-	      );
-
-#ifdef IPV6CP_COMP
-    NAKCIVJ(CI_COMPRESSTYPE, neg_vj,
-	    {
-		if (cishort == IPV6CP_COMP) {
-		    try.vj_protocol = cishort;
-		} else {
-		    try.neg_vj = 0;
-		}
-	    }
-	    );
-#else
-    NAKCIVJ(CI_COMPRESSTYPE, neg_vj,
-	    {
-		try.neg_vj = 0;
-	    }
-	    );
-#endif
-
-    /*
-     * There may be remaining CIs, if the peer is requesting negotiation
-     * on an option that we didn't include in our request packet.
-     * If they want to negotiate about interface identifier, we comply.
-     * If they want us to ask for compression, we refuse.
-     */
-    while (len > CILEN_VOID) {
-	GETCHAR(citype, p);
-	GETCHAR(cilen, p);
-	if( (len -= cilen) < 0 )
-	    goto bad;
-	next = p + cilen - 2;
-
-	switch (citype) {
-	case CI_COMPRESSTYPE:
-	    if (go->neg_vj || no.neg_vj ||
-		(cilen != CILEN_COMPRESS))
-		goto bad;
-	    no.neg_vj = 1;
-	    break;
-	case CI_IFACEID:
-	    if (go->neg_ifaceid || no.neg_ifaceid || cilen != CILEN_IFACEID)
-		goto bad;
-	    try.neg_ifaceid = 1;
-	    eui64_get(ifaceid, p);
-	    if (go->accept_local) {
-		while (eui64_iszero(ifaceid) || 
-		       eui64_equals(ifaceid, go->hisid)) /* bad luck */
-		    eui64_magic(ifaceid);
-		try.ourid = ifaceid;
-	    }
-	    no.neg_ifaceid = 1;
-	    break;
-	}
-	p = next;
-    }
-
-    /* If there is still anything left, this packet is bad. */
-    if (len != 0)
-	goto bad;
-
-    /*
-     * OK, the Nak is good.  Now we can update state.
-     */
-    if (f->state != OPENED)
-	*go = try;
-
-    return 1;
-
-bad:
-    IPV6CPDEBUG(("ipv6cp_nakci: received bad Nak!"));
-    return 0;
-}
-
-
-/*
- * ipv6cp_rejci - Reject some of our CIs.
- */
-static int
-ipv6cp_rejci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-    u_char cilen;
-    u_short cishort;
-    eui64_t ifaceid;
-    ipv6cp_options try;		/* options to request next time */
-
-    try = *go;
-    /*
-     * Any Rejected CIs must be in exactly the same order that we sent.
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-#define REJCIIFACEID(opt, neg, val1) \
-    if (go->neg && \
-	len >= (cilen = CILEN_IFACEID) && \
-	p[1] == cilen && \
-	p[0] == opt) { \
-	len -= cilen; \
-	INCPTR(2, p); \
-	eui64_get(ifaceid, p); \
-	/* Check rejected value. */ \
-	if (! eui64_equals(ifaceid, val1)) \
-	    goto bad; \
-	try.neg = 0; \
-    }
-
-#define REJCIVJ(opt, neg, val) \
-    if (go->neg && \
-	p[1] == CILEN_COMPRESS && \
-	len >= p[1] && \
-	p[0] == opt) { \
-	len -= p[1]; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	/* Check rejected value. */  \
-	if (cishort != val) \
-	    goto bad; \
-	try.neg = 0; \
-     }
-
-    REJCIIFACEID(CI_IFACEID, neg_ifaceid, go->ourid);
-
-    REJCIVJ(CI_COMPRESSTYPE, neg_vj, go->vj_protocol);
-
-    /*
-     * If there are any remaining CIs, then this packet is bad.
-     */
-    if (len != 0)
-	goto bad;
-    /*
-     * Now we can update state.
-     */
-    if (f->state != OPENED)
-	*go = try;
-    return 1;
-
-bad:
-    IPV6CPDEBUG(("ipv6cp_rejci: received bad Reject!"));
-    return 0;
-}
-
-
-/*
- * ipv6cp_reqci - Check the peer's requested CIs and send appropriate response.
- *
- * Returns: CONFACK, CONFNAK or CONFREJ and input packet modified
- * appropriately.  If reject_if_disagree is non-zero, doesn't return
- * CONFNAK; returns CONFREJ if it can't return CONFACK.
- */
-static int
-ipv6cp_reqci(f, inp, len, reject_if_disagree)
-    fsm *f;
-    u_char *inp;		/* Requested CIs */
-    int *len;			/* Length of requested CIs */
-    int reject_if_disagree;
-{
-    ipv6cp_options *wo = &ipv6cp_wantoptions[f->unit];
-    ipv6cp_options *ho = &ipv6cp_hisoptions[f->unit];
-    ipv6cp_options *ao = &ipv6cp_allowoptions[f->unit];
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-    u_char *cip, *next;		/* Pointer to current and next CIs */
-    u_short cilen, citype;	/* Parsed len, type */
-    u_short cishort;		/* Parsed short value */
-    eui64_t ifaceid;		/* Parsed interface identifier */
-    int rc = CONFACK;		/* Final packet return code */
-    int orc;			/* Individual option return code */
-    u_char *p;			/* Pointer to next char to parse */
-    u_char *ucp = inp;		/* Pointer to current output char */
-    int l = *len;		/* Length left */
-
-    /*
-     * Reset all his options.
-     */
-    BZERO(ho, sizeof(*ho));
-    
-    /*
-     * Process all his options.
-     */
-    next = inp;
-    while (l) {
-	orc = CONFACK;			/* Assume success */
-	cip = p = next;			/* Remember begining of CI */
-	if (l < 2 ||			/* Not enough data for CI header or */
-	    p[1] < 2 ||			/*  CI length too small or */
-	    p[1] > l) {			/*  CI length too big? */
-	    IPV6CPDEBUG(("ipv6cp_reqci: bad CI length!"));
-	    orc = CONFREJ;		/* Reject bad CI */
-	    cilen = l;			/* Reject till end of packet */
-	    l = 0;			/* Don't loop again */
-	    goto endswitch;
-	}
-	GETCHAR(citype, p);		/* Parse CI type */
-	GETCHAR(cilen, p);		/* Parse CI length */
-	l -= cilen;			/* Adjust remaining length */
-	next += cilen;			/* Step to next CI */
-
-	switch (citype) {		/* Check CI type */
-	case CI_IFACEID:
-	    IPV6CPDEBUG(("ipv6cp: received interface identifier "));
-
-	    if (!ao->neg_ifaceid ||
-		cilen != CILEN_IFACEID) {	/* Check CI length */
-		orc = CONFREJ;		/* Reject CI */
-		break;
-	    }
-
-	    /*
-	     * If he has no interface identifier, or if we both have same 
-	     * identifier then NAK it with new idea.
-	     * In particular, if we don't know his identifier, but he does,
-	     * then accept it.
-	     */
-	    eui64_get(ifaceid, p);
-	    IPV6CPDEBUG(("(%s)", llv6_ntoa(ifaceid)));
-	    if (eui64_iszero(ifaceid) && eui64_iszero(go->ourid)) {
-		orc = CONFREJ;		/* Reject CI */
-		break;
-	    }
-	    if (!eui64_iszero(wo->hisid) && 
-		!eui64_equals(ifaceid, wo->hisid) && 
-		eui64_iszero(go->hisid)) {
-		    
-		orc = CONFNAK;
-		ifaceid = wo->hisid;
-		go->hisid = ifaceid;
-		DECPTR(sizeof(ifaceid), p);
-		eui64_put(ifaceid, p);
-	    } else
-	    if (eui64_iszero(ifaceid) || eui64_equals(ifaceid, go->ourid)) {
-		orc = CONFNAK;
-		if (eui64_iszero(go->hisid))	/* first time, try option */
-		    ifaceid = wo->hisid;
-		while (eui64_iszero(ifaceid) || 
-		       eui64_equals(ifaceid, go->ourid)) /* bad luck */
-		    eui64_magic(ifaceid);
-		go->hisid = ifaceid;
-		DECPTR(sizeof(ifaceid), p);
-		eui64_put(ifaceid, p);
-	    }
-
-	    ho->neg_ifaceid = 1;
-	    ho->hisid = ifaceid;
-	    break;
-
-	case CI_COMPRESSTYPE:
-	    IPV6CPDEBUG(("ipv6cp: received COMPRESSTYPE "));
-	    if (!ao->neg_vj ||
-		(cilen != CILEN_COMPRESS)) {
-		orc = CONFREJ;
-		break;
-	    }
-	    GETSHORT(cishort, p);
-	    IPV6CPDEBUG(("(%d)", cishort));
-
-#ifdef IPV6CP_COMP
-	    if (!(cishort == IPV6CP_COMP)) {
-		orc = CONFREJ;
-		break;
-	    }
-
-	    ho->neg_vj = 1;
-	    ho->vj_protocol = cishort;
-	    break;
-#else
-	    orc = CONFREJ;
-	    break;
-#endif
-
-	default:
-	    orc = CONFREJ;
-	    break;
-	}
-
-endswitch:
-	IPV6CPDEBUG((" (%s)\n", CODENAME(orc)));
-
-	if (orc == CONFACK &&		/* Good CI */
-	    rc != CONFACK)		/*  but prior CI wasnt? */
-	    continue;			/* Don't send this one */
-
-	if (orc == CONFNAK) {		/* Nak this CI? */
-	    if (reject_if_disagree)	/* Getting fed up with sending NAKs? */
-		orc = CONFREJ;		/* Get tough if so */
-	    else {
-		if (rc == CONFREJ)	/* Rejecting prior CI? */
-		    continue;		/* Don't send this one */
-		if (rc == CONFACK) {	/* Ack'd all prior CIs? */
-		    rc = CONFNAK;	/* Not anymore... */
-		    ucp = inp;		/* Backup */
-		}
-	    }
-	}
-
-	if (orc == CONFREJ &&		/* Reject this CI */
-	    rc != CONFREJ) {		/*  but no prior ones? */
-	    rc = CONFREJ;
-	    ucp = inp;			/* Backup */
-	}
-
-	/* Need to move CI? */
-	if (ucp != cip)
-	    BCOPY(cip, ucp, cilen);	/* Move it */
-
-	/* Update output pointer */
-	INCPTR(cilen, ucp);
-    }
-
-    /*
-     * If we aren't rejecting this packet, and we want to negotiate
-     * their identifier and they didn't send their identifier, then we
-     * send a NAK with a CI_IFACEID option appended.  We assume the
-     * input buffer is long enough that we can append the extra
-     * option safely.
-     */
-    if (rc != CONFREJ && !ho->neg_ifaceid &&
-	wo->req_ifaceid && !reject_if_disagree) {
-	if (rc == CONFACK) {
-	    rc = CONFNAK;
-	    ucp = inp;				/* reset pointer */
-	    wo->req_ifaceid = 0;		/* don't ask again */
-	}
-	PUTCHAR(CI_IFACEID, ucp);
-	PUTCHAR(CILEN_IFACEID, ucp);
-	eui64_put(wo->hisid, ucp);
-    }
-
-    *len = ucp - inp;			/* Compute output length */
-    IPV6CPDEBUG(("ipv6cp: returning Configure-%s", CODENAME(rc)));
-    return (rc);			/* Return final code */
-}
-
-
-/*
- * ipv6_check_options - check that any IP-related options are OK,
- * and assign appropriate defaults.
- */
-static void
-ipv6_check_options()
-{
-    ipv6cp_options *wo = &ipv6cp_wantoptions[0];
-
-    if (!ipv6cp_protent.enabled_flag)
-	return;
-
-#if defined(SOL2)
-    /*
-     * Persistent link-local id is only used when user has not explicitly
-     * configure/hard-code the id
-     */
-    if ((wo->use_persistent) && (!wo->opt_local) && (!wo->opt_remote)) {
-
-	/* 
-	 * On systems where there are no Ethernet interfaces used, there
-	 * may be other ways to obtain a persistent id. Right now, it
-	 * will fall back to using magic [see eui64_magic] below when
-	 * an EUI-48 from MAC address can't be obtained. Other possibilities
-	 * include obtaining EEPROM serial numbers, or some other unique
-	 * yet persistent number. On Sparc platforms, this is possible,
-	 * but too bad there's no standards yet for x86 machines.
-	 */
-	if (ether_to_eui64(&wo->ourid)) {
-	    wo->opt_local = 1;
-	}
-    }
-#endif
-
-    if (!wo->opt_local) {	/* init interface identifier */
-	if (wo->use_ip && eui64_iszero(wo->ourid)) {
-	    eui64_setlo32(wo->ourid, ntohl(ipcp_wantoptions[0].ouraddr));
-	    if (!eui64_iszero(wo->ourid))
-		wo->opt_local = 1;
-	}
-	
-	while (eui64_iszero(wo->ourid))
-	    eui64_magic(wo->ourid);
-    }
-
-    if (!wo->opt_remote) {
-	if (wo->use_ip && eui64_iszero(wo->hisid)) {
-	    eui64_setlo32(wo->hisid, ntohl(ipcp_wantoptions[0].hisaddr));
-	    if (!eui64_iszero(wo->hisid))
-		wo->opt_remote = 1;
-	}
-    }
-
-    if (demand && (eui64_iszero(wo->ourid) || eui64_iszero(wo->hisid))) {
-	option_error("local/remote LL address required for demand-dialling\n");
-	exit(1);
-    }
-}
-
-
-/*
- * ipv6_demand_conf - configure the interface as though
- * IPV6CP were up, for use with dial-on-demand.
- */
-static int
-ipv6_demand_conf(u)
-    int u;
-{
-    ipv6cp_options *wo = &ipv6cp_wantoptions[u];
-
-#if defined(__linux__) || defined(SOL2) || (defined(SVR4) && (defined(SNI) || defined(__USLC__)))
-#if defined(SOL2)
-    if (!sif6up(u))
-	return 0;
-#else
-    if (!sifup(u))
-	return 0;
-#endif /* defined(SOL2) */
-#endif    
-    if (!sif6addr(u, wo->ourid, wo->hisid))
-	return 0;
-#if !defined(__linux__) && !(defined(SVR4) && (defined(SNI) || defined(__USLC__)))
-    if (!sifup(u))
-	return 0;
-#endif
-    if (!sifnpmode(u, PPP_IPV6, NPMODE_QUEUE))
-	return 0;
-
-    notice("ipv6_demand_conf");
-    notice("local  LL address %s", llv6_ntoa(wo->ourid));
-    notice("remote LL address %s", llv6_ntoa(wo->hisid));
-
-    return 1;
-}
-
-
-/*
- * ipv6cp_up - IPV6CP has come UP.
- *
- * Configure the IPv6 network interface appropriately and bring it up.
- */
-static void
-ipv6cp_up(f)
-    fsm *f;
-{
-    ipv6cp_options *ho = &ipv6cp_hisoptions[f->unit];
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-    ipv6cp_options *wo = &ipv6cp_wantoptions[f->unit];
-
-    IPV6CPDEBUG(("ipv6cp: up"));
-
-    /*
-     * We must have a non-zero LL address for both ends of the link.
-     */
-    if (!ho->neg_ifaceid)
-	ho->hisid = wo->hisid;
-
-    if(!no_ifaceid_neg) {
-	if (eui64_iszero(ho->hisid)) {
-	    error("Could not determine remote LL address");
-	    ipv6cp_close(f->unit, "Could not determine remote LL address");
-	    return;
-	}
-	if (eui64_iszero(go->ourid)) {
-	    error("Could not determine local LL address");
-	    ipv6cp_close(f->unit, "Could not determine local LL address");
-	    return;
-	}
-	if (eui64_equals(go->ourid, ho->hisid)) {
-	    error("local and remote LL addresses are equal");
-	    ipv6cp_close(f->unit, "local and remote LL addresses are equal");
-	    return;
-	}
-    }
-    script_setenv("LLLOCAL", llv6_ntoa(go->ourid), 0);
-    script_setenv("LLREMOTE", llv6_ntoa(ho->hisid), 0);
-
-#ifdef IPV6CP_COMP
-    /* set tcp compression */
-    sif6comp(f->unit, ho->neg_vj);
-#endif
-
-    /*
-     * If we are doing dial-on-demand, the interface is already
-     * configured, so we put out any saved-up packets, then set the
-     * interface to pass IPv6 packets.
-     */
-    if (demand) {
-	if (! eui64_equals(go->ourid, wo->ourid) || 
-	    ! eui64_equals(ho->hisid, wo->hisid)) {
-	    if (! eui64_equals(go->ourid, wo->ourid))
-		warn("Local LL address changed to %s", 
-		     llv6_ntoa(go->ourid));
-	    if (! eui64_equals(ho->hisid, wo->hisid))
-		warn("Remote LL address changed to %s", 
-		     llv6_ntoa(ho->hisid));
-	    ipv6cp_clear_addrs(f->unit, go->ourid, ho->hisid);
-
-	    /* Set the interface to the new addresses */
-	    if (!sif6addr(f->unit, go->ourid, ho->hisid)) {
-		if (debug)
-		    warn("sif6addr failed");
-		ipv6cp_close(f->unit, "Interface configuration failed");
-		return;
-	    }
-
-	}
-	demand_rexmit(PPP_IPV6);
-	sifnpmode(f->unit, PPP_IPV6, NPMODE_PASS);
-
-    } else {
-	/*
-	 * Set LL addresses
-	 */
-#if !defined(__linux__) && !defined(SOL2) && !(defined(SVR4) && (defined(SNI) || defined(__USLC__)))
-	if (!sif6addr(f->unit, go->ourid, ho->hisid)) {
-	    if (debug)
-		warn("sif6addr failed");
-	    ipv6cp_close(f->unit, "Interface configuration failed");
-	    return;
-	}
-#endif
-
-	/* bring the interface up for IPv6 */
-#if defined(SOL2)
-	if (!sif6up(f->unit)) {
-	    if (debug)
-		warn("sifup failed (IPV6)");
-	    ipv6cp_close(f->unit, "Interface configuration failed");
-	    return;
-	}
-#else
-	if (!sifup(f->unit)) {
-	    if (debug)
-		warn("sifup failed (IPV6)");
-	    ipv6cp_close(f->unit, "Interface configuration failed");
-	    return;
-	}
-#endif /* defined(SOL2) */
-
-#if defined(__linux__) || defined(SOL2) || (defined(SVR4) && (defined(SNI) || defined(__USLC__)))
-	if (!sif6addr(f->unit, go->ourid, ho->hisid)) {
-	    if (debug)
-		warn("sif6addr failed");
-	    ipv6cp_close(f->unit, "Interface configuration failed");
-	    return;
-	}
-#endif
-	sifnpmode(f->unit, PPP_IPV6, NPMODE_PASS);
-
-	notice("local  LL address %s", llv6_ntoa(go->ourid));
-	notice("remote LL address %s", llv6_ntoa(ho->hisid));
-    }
-
-    np_up(f->unit, PPP_IPV6);
-    ipv6cp_is_up = 1;
-
-    /*
-     * Execute the ipv6-up script, like this:
-     *	/etc/ppp/ipv6-up interface tty speed local-LL remote-LL
-     */
-    if (ipv6cp_script_state == s_down && ipv6cp_script_pid == 0) {
-	ipv6cp_script_state = s_up;
-	ipv6cp_script(_PATH_IPV6UP);
-    }
-}
-
-
-/*
- * ipv6cp_down - IPV6CP has gone DOWN.
- *
- * Take the IPv6 network interface down, clear its addresses
- * and delete routes through it.
- */
-static void
-ipv6cp_down(f)
-    fsm *f;
-{
-    IPV6CPDEBUG(("ipv6cp: down"));
-    update_link_stats(f->unit);
-    if (ipv6cp_is_up) {
-	ipv6cp_is_up = 0;
-	np_down(f->unit, PPP_IPV6);
-    }
-#ifdef IPV6CP_COMP
-    sif6comp(f->unit, 0);
-#endif
-
-    /*
-     * If we are doing dial-on-demand, set the interface
-     * to queue up outgoing packets (for now).
-     */
-    if (demand) {
-	sifnpmode(f->unit, PPP_IPV6, NPMODE_QUEUE);
-    } else {
-	sifnpmode(f->unit, PPP_IPV6, NPMODE_DROP);
-#if !defined(__linux__) && !(defined(SVR4) && (defined(SNI) || defined(__USLC)))
-#if defined(SOL2)
-	sif6down(f->unit);
-#else
-	sifdown(f->unit);
-#endif /* defined(SOL2) */
-#endif
-	ipv6cp_clear_addrs(f->unit, 
-			   ipv6cp_gotoptions[f->unit].ourid,
-			   ipv6cp_hisoptions[f->unit].hisid);
-#if defined(__linux__) || (defined(SVR4) && (defined(SNI) || defined(__USLC)))
-	sifdown(f->unit);
-#endif
-    }
-
-    /* Execute the ipv6-down script */
-    if (ipv6cp_script_state == s_up && ipv6cp_script_pid == 0) {
-	ipv6cp_script_state = s_down;
-	ipv6cp_script(_PATH_IPV6DOWN);
-    }
-}
-
-
-/*
- * ipv6cp_clear_addrs() - clear the interface addresses, routes,
- * proxy neighbour discovery entries, etc.
- */
-static void
-ipv6cp_clear_addrs(unit, ourid, hisid)
-    int unit;
-    eui64_t ourid;
-    eui64_t hisid;
-{
-    cif6addr(unit, ourid, hisid);
-}
-
-
-/*
- * ipv6cp_finished - possibly shut down the lower layers.
- */
-static void
-ipv6cp_finished(f)
-    fsm *f;
-{
-    np_finished(f->unit, PPP_IPV6);
-}
-
-
-/*
- * ipv6cp_script_done - called when the ipv6-up or ipv6-down script
- * has finished.
- */
-static void
-ipv6cp_script_done(arg)
-    void *arg;
-{
-    ipv6cp_script_pid = 0;
-    switch (ipv6cp_script_state) {
-    case s_up:
-	if (ipv6cp_fsm[0].state != OPENED) {
-	    ipv6cp_script_state = s_down;
-	    ipv6cp_script(_PATH_IPV6DOWN);
-	}
-	break;
-    case s_down:
-	if (ipv6cp_fsm[0].state == OPENED) {
-	    ipv6cp_script_state = s_up;
-	    ipv6cp_script(_PATH_IPV6UP);
-	}
-	break;
-    }
-}
-
-
-/*
- * ipv6cp_script - Execute a script with arguments
- * interface-name tty-name speed local-LL remote-LL.
- */
-static void
-ipv6cp_script(script)
-    char *script;
-{
-    char strspeed[32], strlocal[32], strremote[32];
-    char *argv[8];
-
-    sprintf(strspeed, "%d", baud_rate);
-    strcpy(strlocal, llv6_ntoa(ipv6cp_gotoptions[0].ourid));
-    strcpy(strremote, llv6_ntoa(ipv6cp_hisoptions[0].hisid));
-
-    argv[0] = script;
-    argv[1] = ifname;
-    argv[2] = devnam;
-    argv[3] = strspeed;
-    argv[4] = strlocal;
-    argv[5] = strremote;
-    argv[6] = ipparam;
-    argv[7] = NULL;
-
-    ipv6cp_script_pid = run_program(script, argv, 0, ipv6cp_script_done, NULL);
-}
-
-/*
- * ipv6cp_printpkt - print the contents of an IPV6CP packet.
- */
-static char *ipv6cp_codenames[] = {
-    "ConfReq", "ConfAck", "ConfNak", "ConfRej",
-    "TermReq", "TermAck", "CodeRej"
-};
-
-static int
-ipv6cp_printpkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int code, id, len, olen;
-    u_char *pstart, *optend;
-    u_short cishort;
-    eui64_t ifaceid;
-
-    if (plen < HEADERLEN)
-	return 0;
-    pstart = p;
-    GETCHAR(code, p);
-    GETCHAR(id, p);
-    GETSHORT(len, p);
-    if (len < HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(ipv6cp_codenames) / sizeof(char *))
-	printer(arg, " %s", ipv6cp_codenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code);
-    printer(arg, " id=0x%x", id);
-    len -= HEADERLEN;
-    switch (code) {
-    case CONFREQ:
-    case CONFACK:
-    case CONFNAK:
-    case CONFREJ:
-	/* print option list */
-	while (len >= 2) {
-	    GETCHAR(code, p);
-	    GETCHAR(olen, p);
-	    p -= 2;
-	    if (olen < 2 || olen > len) {
-		break;
-	    }
-	    printer(arg, " <");
-	    len -= olen;
-	    optend = p + olen;
-	    switch (code) {
-	    case CI_COMPRESSTYPE:
-		if (olen >= CILEN_COMPRESS) {
-		    p += 2;
-		    GETSHORT(cishort, p);
-		    printer(arg, "compress ");
-		    printer(arg, "0x%x", cishort);
-		}
-		break;
-	    case CI_IFACEID:
-		if (olen == CILEN_IFACEID) {
-		    p += 2;
-		    eui64_get(ifaceid, p);
-		    printer(arg, "addr %s", llv6_ntoa(ifaceid));
-		}
-		break;
-	    }
-	    while (p < optend) {
-		GETCHAR(code, p);
-		printer(arg, " %.2x", code);
-	    }
-	    printer(arg, ">");
-	}
-	break;
-
-    case TERMACK:
-    case TERMREQ:
-	if (len > 0 && *p >= ' ' && *p < 0x7f) {
-	    printer(arg, " ");
-	    print_string((char *)p, len, printer, arg);
-	    p += len;
-	    len = 0;
-	}
-	break;
-    }
-
-    /* print the rest of the bytes in the packet */
-    for (; len > 0; --len) {
-	GETCHAR(code, p);
-	printer(arg, " %.2x", code);
-    }
-
-    return p - pstart;
-}
-
-/*
- * ipv6_active_pkt - see if this IP packet is worth bringing the link up for.
- * We don't bring the link up for IP fragments or for TCP FIN packets
- * with no data.
- */
-#define IP6_HDRLEN	40	/* bytes */
-#define IP6_NHDR_FRAG	44	/* fragment IPv6 header */
-#define IPPROTO_TCP	6
-#define TCP_HDRLEN	20
-#define TH_FIN		0x01
-
-/*
- * We use these macros because the IP header may be at an odd address,
- * and some compilers might use word loads to get th_off or ip_hl.
- */
-
-#define get_ip6nh(x)	(((unsigned char *)(x))[6])
-#define get_tcpoff(x)	(((unsigned char *)(x))[12] >> 4)
-#define get_tcpflags(x)	(((unsigned char *)(x))[13])
-
-static int
-ipv6_active_pkt(pkt, len)
-    u_char *pkt;
-    int len;
-{
-    u_char *tcp;
-
-    len -= PPP_HDRLEN;
-    pkt += PPP_HDRLEN;
-    if (len < IP6_HDRLEN)
-	return 0;
-    if (get_ip6nh(pkt) == IP6_NHDR_FRAG)
-	return 0;
-    if (get_ip6nh(pkt) != IPPROTO_TCP)
-	return 1;
-    if (len < IP6_HDRLEN + TCP_HDRLEN)
-	return 0;
-    tcp = pkt + IP6_HDRLEN;
-    if ((get_tcpflags(tcp) & TH_FIN) != 0 && len == IP6_HDRLEN + get_tcpoff(tcp) * 4)
-	return 0;
-    return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/ipv6cp.h b/mdk-stage1/ppp/pppd/ipv6cp.h
deleted file mode 100644
index 60d366eb3..000000000
--- a/mdk-stage1/ppp/pppd/ipv6cp.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-    ipv6cp.h - PPP IPV6 Control Protocol.
-    Copyright (C) 1999  Tommi Komulainen <Tommi.Komulainen@iki.fi>
-
-    Redistribution and use in source and binary forms are permitted
-    provided that the above copyright notice and this paragraph are
-    duplicated in all such forms.  The name of the author may not be
-    used to endorse or promote products derived from this software
-    without specific prior written permission.
-    THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-    IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-    WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-*/
-
-/*  Original version, based on RFC2023 :
-
-    Copyright (c) 1995, 1996, 1997 Francis.Dupont@inria.fr, INRIA Rocquencourt,
-    Alain.Durand@imag.fr, IMAG,
-    Jean-Luc.Richier@imag.fr, IMAG-LSR.
-
-    Copyright (c) 1998, 1999 Francis.Dupont@inria.fr, GIE DYADE,
-    Alain.Durand@imag.fr, IMAG,
-    Jean-Luc.Richier@imag.fr, IMAG-LSR.
-
-    Ce travail a �t� fait au sein du GIE DYADE (Groupement d'Int�r�t
-    �conomique ayant pour membres BULL S.A. et l'INRIA).
-
-    Ce logiciel informatique est disponible aux conditions
-    usuelles dans la recherche, c'est-�-dire qu'il peut
-    �tre utilis�, copi�, modifi�, distribu� � l'unique
-    condition que ce texte soit conserv� afin que
-    l'origine de ce logiciel soit reconnue.
-
-    Le nom de l'Institut National de Recherche en Informatique
-    et en Automatique (INRIA), de l'IMAG, ou d'une personne morale
-    ou physique ayant particip� � l'�laboration de ce logiciel ne peut
-    �tre utilis� sans son accord pr�alable explicite.
-
-    Ce logiciel est fourni tel quel sans aucune garantie,
-    support ou responsabilit� d'aucune sorte.
-    Ce logiciel est d�riv� de sources d'origine
-    "University of California at Berkeley" et
-    "Digital Equipment Corporation" couvertes par des copyrights.
-
-    L'Institut d'Informatique et de Math�matiques Appliqu�es de Grenoble (IMAG)
-    est une f�d�ration d'unit�s mixtes de recherche du CNRS, de l'Institut National
-    Polytechnique de Grenoble et de l'Universit� Joseph Fourier regroupant
-    sept laboratoires dont le laboratoire Logiciels, Syst�mes, R�seaux (LSR).
-
-    This work has been done in the context of GIE DYADE (joint R & D venture
-    between BULL S.A. and INRIA).
-
-    This software is available with usual "research" terms
-    with the aim of retain credits of the software. 
-    Permission to use, copy, modify and distribute this software for any
-    purpose and without fee is hereby granted, provided that the above
-    copyright notice and this permission notice appear in all copies,
-    and the name of INRIA, IMAG, or any contributor not be used in advertising
-    or publicity pertaining to this material without the prior explicit
-    permission. The software is provided "as is" without any
-    warranties, support or liabilities of any kind.
-    This software is derived from source code from
-    "University of California at Berkeley" and
-    "Digital Equipment Corporation" protected by copyrights.
-
-    Grenoble's Institute of Computer Science and Applied Mathematics (IMAG)
-    is a federation of seven research units funded by the CNRS, National
-    Polytechnic Institute of Grenoble and University Joseph Fourier.
-    The research unit in Software, Systems, Networks (LSR) is member of IMAG.
-*/
-
-/*
- * Derived from :
- *
- *
- * ipcp.h - IP Control Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Options.
- */
-#define CI_IFACEID	1	/* Interface Identifier */
-#define CI_COMPRESSTYPE	2	/* Compression Type     */
-
-/* No compression types yet defined.
- *#define IPV6CP_COMP	0x004f
- */
-typedef struct ipv6cp_options {
-    int neg_ifaceid;		/* Negotiate interface identifier? */
-    int req_ifaceid;		/* Ask peer to send interface identifier? */
-    int accept_local;		/* accept peer's value for iface id? */
-    int opt_local;		/* ourtoken set by option */
-    int opt_remote;		/* histoken set by option */
-    int use_ip;			/* use IP as interface identifier */
-#if defined(SOL2)
-    int use_persistent;		/* use uniquely persistent value for address */
-#endif /* defined(SOL2) */
-    int neg_vj;			/* Van Jacobson Compression? */
-    u_short vj_protocol;	/* protocol value to use in VJ option */
-    eui64_t ourid, hisid;	/* Interface identifiers */
-} ipv6cp_options;
-
-extern fsm ipv6cp_fsm[];
-extern ipv6cp_options ipv6cp_wantoptions[];
-extern ipv6cp_options ipv6cp_gotoptions[];
-extern ipv6cp_options ipv6cp_allowoptions[];
-extern ipv6cp_options ipv6cp_hisoptions[];
-
-extern struct protent ipv6cp_protent;
diff --git a/mdk-stage1/ppp/pppd/ipxcp.c b/mdk-stage1/ppp/pppd/ipxcp.c
deleted file mode 100644
index f9a12b934..000000000
--- a/mdk-stage1/ppp/pppd/ipxcp.c
+++ /dev/null
@@ -1,1570 +0,0 @@
-/*
- * ipxcp.c - PPP IPX Control Protocol.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifdef IPX_CHANGE
-
-#define RCSID	"$Id$"
-
-/*
- * TODO:
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-#include <ctype.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipxcp.h"
-#include "pathnames.h"
-#include "magic.h"
-
-static const char rcsid[] = RCSID;
-
-/* global vars */
-ipxcp_options ipxcp_wantoptions[NUM_PPP];	/* Options that we want to request */
-ipxcp_options ipxcp_gotoptions[NUM_PPP];	/* Options that peer ack'd */
-ipxcp_options ipxcp_allowoptions[NUM_PPP];	/* Options we allow peer to request */
-ipxcp_options ipxcp_hisoptions[NUM_PPP];	/* Options that we ack'd */
-
-#define wo (&ipxcp_wantoptions[0])
-#define ao (&ipxcp_allowoptions[0])
-#define go (&ipxcp_gotoptions[0])
-#define ho (&ipxcp_hisoptions[0])
-
-/*
- * Callbacks for fsm code.  (CI = Configuration Information)
- */
-static void ipxcp_resetci __P((fsm *));	/* Reset our CI */
-static int  ipxcp_cilen __P((fsm *));		/* Return length of our CI */
-static void ipxcp_addci __P((fsm *, u_char *, int *)); /* Add our CI */
-static int  ipxcp_ackci __P((fsm *, u_char *, int));	/* Peer ack'd our CI */
-static int  ipxcp_nakci __P((fsm *, u_char *, int));	/* Peer nak'd our CI */
-static int  ipxcp_rejci __P((fsm *, u_char *, int));	/* Peer rej'd our CI */
-static int  ipxcp_reqci __P((fsm *, u_char *, int *, int)); /* Rcv CI */
-static void ipxcp_up __P((fsm *));		/* We're UP */
-static void ipxcp_down __P((fsm *));		/* We're DOWN */
-static void ipxcp_finished __P((fsm *));	/* Don't need lower layer */
-static void ipxcp_script __P((fsm *, char *)); /* Run an up/down script */
-
-fsm ipxcp_fsm[NUM_PPP];		/* IPXCP fsm structure */
-
-static fsm_callbacks ipxcp_callbacks = { /* IPXCP callback routines */
-    ipxcp_resetci,		/* Reset our Configuration Information */
-    ipxcp_cilen,		/* Length of our Configuration Information */
-    ipxcp_addci,		/* Add our Configuration Information */
-    ipxcp_ackci,		/* ACK our Configuration Information */
-    ipxcp_nakci,		/* NAK our Configuration Information */
-    ipxcp_rejci,		/* Reject our Configuration Information */
-    ipxcp_reqci,		/* Request peer's Configuration Information */
-    ipxcp_up,			/* Called when fsm reaches OPENED state */
-    ipxcp_down,			/* Called when fsm leaves OPENED state */
-    NULL,			/* Called when we want the lower layer up */
-    ipxcp_finished,		/* Called when we want the lower layer down */
-    NULL,			/* Called when Protocol-Reject received */
-    NULL,			/* Retransmission is necessary */
-    NULL,			/* Called to handle protocol-specific codes */
-    "IPXCP"			/* String name of protocol */
-};
-
-/*
- * Command-line options.
- */
-static int setipxnode __P((char **));
-static void printipxnode __P((option_t *,
-			      void (*)(void *, char *, ...), void *));
-static int setipxname __P((char **));
-
-static option_t ipxcp_option_list[] = {
-    { "ipx", o_bool, &ipxcp_protent.enabled_flag,
-      "Enable IPXCP (and IPX)", OPT_PRIO | 1 },
-    { "+ipx", o_bool, &ipxcp_protent.enabled_flag,
-      "Enable IPXCP (and IPX)", OPT_PRIOSUB | OPT_ALIAS | 1 },
-    { "noipx", o_bool, &ipxcp_protent.enabled_flag,
-      "Disable IPXCP (and IPX)", OPT_PRIOSUB },
-    { "-ipx", o_bool, &ipxcp_protent.enabled_flag,
-      "Disable IPXCP (and IPX)", OPT_PRIOSUB | OPT_ALIAS },
-
-    { "ipx-network", o_uint32, &ipxcp_wantoptions[0].our_network,
-      "Set our IPX network number", OPT_PRIO, &ipxcp_wantoptions[0].neg_nn },
-
-    { "ipxcp-accept-network", o_bool, &ipxcp_wantoptions[0].accept_network,
-      "Accept peer IPX network number", 1,
-      &ipxcp_allowoptions[0].accept_network },
-
-    { "ipx-node", o_special, (void *)setipxnode,
-      "Set IPX node number", OPT_A2PRINTER, (void *)printipxnode },
-
-    { "ipxcp-accept-local", o_bool, &ipxcp_wantoptions[0].accept_local,
-      "Accept our IPX address", 1,
-      &ipxcp_allowoptions[0].accept_local },
-
-    { "ipxcp-accept-remote", o_bool, &ipxcp_wantoptions[0].accept_remote,
-      "Accept peer's IPX address", 1,
-      &ipxcp_allowoptions[0].accept_remote },
-
-    { "ipx-routing", o_int, &ipxcp_wantoptions[0].router,
-      "Set IPX routing proto number", OPT_PRIO,
-      &ipxcp_wantoptions[0].neg_router },
-
-    { "ipx-router-name", o_special, setipxname,
-      "Set IPX router name", OPT_PRIO | OPT_A2STRVAL | OPT_STATIC,
-       &ipxcp_wantoptions[0].name },
-
-    { "ipxcp-restart", o_int, &ipxcp_fsm[0].timeouttime,
-      "Set timeout for IPXCP", OPT_PRIO },
-    { "ipxcp-max-terminate", o_int, &ipxcp_fsm[0].maxtermtransmits,
-      "Set max #xmits for IPXCP term-reqs", OPT_PRIO },
-    { "ipxcp-max-configure", o_int, &ipxcp_fsm[0].maxconfreqtransmits,
-      "Set max #xmits for IPXCP conf-reqs", OPT_PRIO },
-    { "ipxcp-max-failure", o_int, &ipxcp_fsm[0].maxnakloops,
-      "Set max #conf-naks for IPXCP", OPT_PRIO },
-
-    { NULL }
-};
-
-/*
- * Protocol entry points.
- */
-
-static void ipxcp_init __P((int));
-static void ipxcp_open __P((int));
-static void ipxcp_close __P((int, char *));
-static void ipxcp_lowerup __P((int));
-static void ipxcp_lowerdown __P((int));
-static void ipxcp_input __P((int, u_char *, int));
-static void ipxcp_protrej __P((int));
-static int  ipxcp_printpkt __P((u_char *, int,
-				void (*) __P((void *, char *, ...)), void *));
-
-struct protent ipxcp_protent = {
-    PPP_IPXCP,
-    ipxcp_init,
-    ipxcp_input,
-    ipxcp_protrej,
-    ipxcp_lowerup,
-    ipxcp_lowerdown,
-    ipxcp_open,
-    ipxcp_close,
-    ipxcp_printpkt,
-    NULL,
-    0,
-    "IPXCP",
-    "IPX",
-    ipxcp_option_list,
-    NULL,
-    NULL,
-    NULL
-};
-
-/*
- * Lengths of configuration options.
- */
-
-#define CILEN_VOID	2
-#define CILEN_COMPLETE	2	/* length of complete option */
-#define CILEN_NETN	6	/* network number length option */
-#define CILEN_NODEN	8	/* node number length option */
-#define CILEN_PROTOCOL	4	/* Minimum length of routing protocol */
-#define CILEN_NAME	3	/* Minimum length of router name */
-#define CILEN_COMPRESS	4	/* Minimum length of compression protocol */
-
-#define CODENAME(x)	((x) == CONFACK ? "ACK" : \
-			 (x) == CONFNAK ? "NAK" : "REJ")
-
-static int ipxcp_is_up;
-
-static char *ipx_ntoa __P((u_int32_t));
-
-/* Used in printing the node number */
-#define NODE(base) base[0], base[1], base[2], base[3], base[4], base[5]
-
-/* Used to generate the proper bit mask */
-#define BIT(num)   (1 << (num))
-
-/*
- * Convert from internal to external notation
- */
-
-static short int
-to_external(internal)
-short int internal;
-{
-    short int  external;
-
-    if (internal & BIT(IPX_NONE) )
-        external = IPX_NONE;
-    else
-        external = RIP_SAP;
-
-    return external;
-}
-
-/*
- * Make a string representation of a network IP address.
- */
-
-static char *
-ipx_ntoa(ipxaddr)
-u_int32_t ipxaddr;
-{
-    static char b[64];
-    slprintf(b, sizeof(b), "%x", ipxaddr);
-    return b;
-}
-
-
-static u_char *
-setipxnodevalue(src,dst)
-u_char *src, *dst;
-{
-    int indx;
-    int item;
-
-    for (;;) {
-        if (!isxdigit (*src))
-	    break;
-	
-	for (indx = 0; indx < 5; ++indx) {
-	    dst[indx] <<= 4;
-	    dst[indx] |= (dst[indx + 1] >> 4) & 0x0F;
-	}
-
-	item = toupper (*src) - '0';
-	if (item > 9)
-	    item -= 7;
-
-	dst[5] = (dst[5] << 4) | item;
-	++src;
-    }
-    return src;
-}
-
-static int ipx_prio_our, ipx_prio_his;
-
-static int
-setipxnode(argv)
-    char **argv;
-{
-    char *end;
-    int have_his = 0;
-    u_char our_node[6];
-    u_char his_node[6];
-
-    memset (our_node, 0, 6);
-    memset (his_node, 0, 6);
-
-    end = setipxnodevalue (*argv, our_node);
-    if (*end == ':') {
-	have_his = 1;
-	end = setipxnodevalue (++end, his_node);
-    }
-
-    if (*end == '\0') {
-        ipxcp_wantoptions[0].neg_node = 1;
-	if (option_priority >= ipx_prio_our) {
-	    memcpy(&ipxcp_wantoptions[0].our_node[0], our_node, 6);
-	    ipx_prio_our = option_priority;
-	}
-	if (have_his && option_priority >= ipx_prio_his) {
-	    memcpy(&ipxcp_wantoptions[0].his_node[0], his_node, 6);
-	    ipx_prio_his = option_priority;
-	}
-        return 1;
-    }
-
-    option_error("invalid parameter '%s' for ipx-node option", *argv);
-    return 0;
-}
-
-static void
-printipxnode(opt, printer, arg)
-    option_t *opt;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	unsigned char *p;
-
-	p = ipxcp_wantoptions[0].our_node;
-	if (ipx_prio_our)
-		printer(arg, "%.2x%.2x%.2x%.2x%.2x%.2x",
-			p[0], p[1], p[2], p[3], p[4], p[5]);
-	printer(arg, ":");
-	p = ipxcp_wantoptions[0].his_node;
-	if (ipx_prio_his)
-		printer(arg, "%.2x%.2x%.2x%.2x%.2x%.2x",
-			p[0], p[1], p[2], p[3], p[4], p[5]);
-}
-
-static int
-setipxname (argv)
-    char **argv;
-{
-    char *dest = ipxcp_wantoptions[0].name;
-    char *src  = *argv;
-    int  count;
-    char ch;
-
-    ipxcp_wantoptions[0].neg_name  = 1;
-    ipxcp_allowoptions[0].neg_name = 1;
-    memset (dest, '\0', sizeof (ipxcp_wantoptions[0].name));
-
-    count = 0;
-    while (*src) {
-        ch = *src++;
-	if (! isalnum (ch) && ch != '_') {
-	    option_error("IPX router name must be alphanumeric or _");
-	    return 0;
-	}
-
-	if (count >= sizeof (ipxcp_wantoptions[0].name) - 1) {
-	    option_error("IPX router name is limited to %d characters",
-			 sizeof (ipxcp_wantoptions[0].name) - 1);
-	    return 0;
-	}
-
-	dest[count++] = toupper (ch);
-    }
-    dest[count] = 0;
-
-    return 1;
-}
-
-/*
- * ipxcp_init - Initialize IPXCP.
- */
-static void
-ipxcp_init(unit)
-    int unit;
-{
-    fsm *f = &ipxcp_fsm[unit];
-
-    f->unit	 = unit;
-    f->protocol	 = PPP_IPXCP;
-    f->callbacks = &ipxcp_callbacks;
-    fsm_init(&ipxcp_fsm[unit]);
-
-    memset (wo->name,	  0, sizeof (wo->name));
-    memset (wo->our_node, 0, sizeof (wo->our_node));
-    memset (wo->his_node, 0, sizeof (wo->his_node));
-
-    wo->neg_nn	       = 1;
-    wo->neg_complete   = 1;
-    wo->network	       = 0;
-
-    ao->neg_node       = 1;
-    ao->neg_nn	       = 1;
-    ao->neg_name       = 1;
-    ao->neg_complete   = 1;
-    ao->neg_router     = 1;
-
-    ao->accept_local   = 0;
-    ao->accept_remote  = 0;
-    ao->accept_network = 0;
-
-    wo->tried_rip      = 0;
-    wo->tried_nlsp     = 0;
-}
-
-/*
- * Copy the node number
- */
-
-static void
-copy_node (src, dst)
-u_char *src, *dst;
-{
-    memcpy (dst, src, sizeof (ipxcp_wantoptions[0].our_node));
-}
-
-/*
- * Compare node numbers
- */
-
-static int
-compare_node (src, dst)
-u_char *src, *dst;
-{
-    return memcmp (dst, src, sizeof (ipxcp_wantoptions[0].our_node)) == 0;
-}
-
-/*
- * Is the node number zero?
- */
-
-static int
-zero_node (node)
-u_char *node;
-{
-    int indx;
-    for (indx = 0; indx < sizeof (ipxcp_wantoptions[0].our_node); ++indx)
-	if (node [indx] != 0)
-	    return 0;
-    return 1;
-}
-
-/*
- * Increment the node number
- */
-
-static void
-inc_node (node)
-u_char *node;
-{
-    u_char   *outp;
-    u_int32_t magic_num;
-
-    outp      = node;
-    magic_num = magic();
-    *outp++   = '\0';
-    *outp++   = '\0';
-    PUTLONG (magic_num, outp);
-}
-
-/*
- * ipxcp_open - IPXCP is allowed to come up.
- */
-static void
-ipxcp_open(unit)
-    int unit;
-{
-    fsm_open(&ipxcp_fsm[unit]);
-}
-
-/*
- * ipxcp_close - Take IPXCP down.
- */
-static void
-ipxcp_close(unit, reason)
-    int unit;
-    char *reason;
-{
-    fsm_close(&ipxcp_fsm[unit], reason);
-}
-
-
-/*
- * ipxcp_lowerup - The lower layer is up.
- */
-static void
-ipxcp_lowerup(unit)
-    int unit;
-{
-    fsm_lowerup(&ipxcp_fsm[unit]);
-}
-
-
-/*
- * ipxcp_lowerdown - The lower layer is down.
- */
-static void
-ipxcp_lowerdown(unit)
-    int unit;
-{
-    fsm_lowerdown(&ipxcp_fsm[unit]);
-}
-
-
-/*
- * ipxcp_input - Input IPXCP packet.
- */
-static void
-ipxcp_input(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    fsm_input(&ipxcp_fsm[unit], p, len);
-}
-
-
-/*
- * ipxcp_protrej - A Protocol-Reject was received for IPXCP.
- *
- * Pretend the lower layer went down, so we shut up.
- */
-static void
-ipxcp_protrej(unit)
-    int unit;
-{
-    fsm_lowerdown(&ipxcp_fsm[unit]);
-}
-
-
-/*
- * ipxcp_resetci - Reset our CI.
- */
-static void
-ipxcp_resetci(f)
-    fsm *f;
-{
-    wo->req_node = wo->neg_node && ao->neg_node;
-    wo->req_nn	 = wo->neg_nn	&& ao->neg_nn;
-
-    if (wo->our_network == 0) {
-	wo->neg_node	   = 1;
-	ao->accept_network = 1;
-    }
-/*
- * If our node number is zero then change it.
- */
-    if (zero_node (wo->our_node)) {
-	inc_node (wo->our_node);
-	ao->accept_local = 1;
-	wo->neg_node	 = 1;
-    }
-/*
- * If his node number is zero then change it.
- */
-    if (zero_node (wo->his_node)) {
-	inc_node (wo->his_node);
-	ao->accept_remote = 1;
-    }
-/*
- * If no routing agent was specified then we do RIP/SAP according to the
- * RFC documents. If you have specified something then OK. Otherwise, we
- * do RIP/SAP.
- */
-    if (ao->router == 0) {
-	ao->router |= BIT(RIP_SAP);
-	wo->router |= BIT(RIP_SAP);
-    }
-
-    /* Always specify a routing protocol unless it was REJected. */
-    wo->neg_router = 1;
-/*
- * Start with these default values
- */
-    *go = *wo;
-}
-
-/*
- * ipxcp_cilen - Return length of our CI.
- */
-
-static int
-ipxcp_cilen(f)
-    fsm *f;
-{
-    int len;
-
-    len	 = go->neg_nn	    ? CILEN_NETN     : 0;
-    len += go->neg_node	    ? CILEN_NODEN    : 0;
-    len += go->neg_name	    ? CILEN_NAME + strlen (go->name) - 1 : 0;
-
-    /* RFC says that defaults should not be included. */
-    if (go->neg_router && to_external(go->router) != RIP_SAP)
-        len += CILEN_PROTOCOL;
-
-    return (len);
-}
-
-
-/*
- * ipxcp_addci - Add our desired CIs to a packet.
- */
-static void
-ipxcp_addci(f, ucp, lenp)
-    fsm *f;
-    u_char *ucp;
-    int *lenp;
-{
-/*
- * Add the options to the record.
- */
-    if (go->neg_nn) {
-	PUTCHAR (IPX_NETWORK_NUMBER, ucp);
-	PUTCHAR (CILEN_NETN, ucp);
-	PUTLONG (go->our_network, ucp);
-    }
-
-    if (go->neg_node) {
-	int indx;
-	PUTCHAR (IPX_NODE_NUMBER, ucp);
-	PUTCHAR (CILEN_NODEN, ucp);
-	for (indx = 0; indx < sizeof (go->our_node); ++indx)
-	    PUTCHAR (go->our_node[indx], ucp);
-    }
-
-    if (go->neg_name) {
-	int cilen = strlen (go->name);
-	int indx;
-	PUTCHAR (IPX_ROUTER_NAME, ucp);
-	PUTCHAR (CILEN_NAME + cilen - 1, ucp);
-	for (indx = 0; indx < cilen; ++indx)
-	    PUTCHAR (go->name [indx], ucp);
-    }
-
-    if (go->neg_router) {
-        short external = to_external (go->router);
-	if (external != RIP_SAP) {
-	    PUTCHAR  (IPX_ROUTER_PROTOCOL, ucp);
-	    PUTCHAR  (CILEN_PROTOCOL,      ucp);
-	    PUTSHORT (external,            ucp);
-	}
-    }
-}
-
-/*
- * ipxcp_ackci - Ack our CIs.
- *
- * Returns:
- *	0 - Ack was bad.
- *	1 - Ack was good.
- */
-static int
-ipxcp_ackci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    u_short cilen, citype, cishort;
-    u_char cichar;
-    u_int32_t cilong;
-
-#define ACKCIVOID(opt, neg) \
-    if (neg) { \
-	if ((len -= CILEN_VOID) < 0) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_VOID || \
-	    citype != opt) \
-	    break; \
-    }
-
-#define ACKCICOMPLETE(opt,neg)	ACKCIVOID(opt, neg)
-
-#define ACKCICHARS(opt, neg, val, cnt) \
-    if (neg) { \
-	int indx, count = cnt; \
-	len -= (count + 2); \
-	if (len < 0) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != (count + 2) || \
-	    citype != opt) \
-	    break; \
-	for (indx = 0; indx < count; ++indx) {\
-	    GETCHAR(cichar, p); \
-	    if (cichar != ((u_char *) &val)[indx]) \
-	       break; \
-	}\
-	if (indx != count) \
-	    break; \
-    }
-
-#define ACKCINODE(opt,neg,val) ACKCICHARS(opt,neg,val,sizeof(val))
-#define ACKCINAME(opt,neg,val) ACKCICHARS(opt,neg,val,strlen(val))
-
-#define ACKCINETWORK(opt, neg, val) \
-    if (neg) { \
-	if ((len -= CILEN_NETN) < 0) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_NETN || \
-	    citype != opt) \
-	    break; \
-	GETLONG(cilong, p); \
-	if (cilong != val) \
-	    break; \
-    }
-
-#define ACKCIPROTO(opt, neg, val) \
-    if (neg) { \
-	if (len < 2) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_PROTOCOL || citype != opt) \
-	    break; \
-	len -= cilen; \
-	if (len < 0) \
-	    break; \
-	GETSHORT(cishort, p); \
-	if (cishort != to_external (val) || cishort == RIP_SAP) \
-	    break; \
-      }
-/*
- * Process the ACK frame in the order in which the frame was assembled
- */
-    do {
-	ACKCINETWORK  (IPX_NETWORK_NUMBER,  go->neg_nn,	    go->our_network);
-	ACKCINODE     (IPX_NODE_NUMBER,	    go->neg_node,   go->our_node);
-	ACKCINAME     (IPX_ROUTER_NAME,	    go->neg_name,   go->name);
-	if (len > 0)
-		ACKCIPROTO    (IPX_ROUTER_PROTOCOL, go->neg_router, go->router);
-/*
- * This is the end of the record.
- */
-	if (len == 0)
-	    return (1);
-    } while (0);
-/*
- * The frame is invalid
- */
-    IPXCPDEBUG(("ipxcp_ackci: received bad Ack!"));
-    return (0);
-}
-
-/*
- * ipxcp_nakci - Peer has sent a NAK for some of our CIs.
- * This should not modify any state if the Nak is bad
- * or if IPXCP is in the OPENED state.
- *
- * Returns:
- *	0 - Nak was bad.
- *	1 - Nak was good.
- */
-
-static int
-ipxcp_nakci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    u_char citype, cilen, *next;
-    u_short s;
-    u_int32_t l;
-    ipxcp_options no;		/* options we've seen Naks for */
-    ipxcp_options try;		/* options to request next time */
-
-    BZERO(&no, sizeof(no));
-    try = *go;
-
-    while (len > CILEN_VOID) {
-	GETCHAR (citype, p);
-	GETCHAR (cilen,	 p);
-	len -= cilen;
-	if (len < 0)
-	    goto bad;
-	next = &p [cilen - CILEN_VOID];
-
-	switch (citype) {
-	case IPX_NETWORK_NUMBER:
-	    if (!go->neg_nn || no.neg_nn || (cilen != CILEN_NETN))
-		goto bad;
-	    no.neg_nn = 1;
-
-	    GETLONG(l, p);
-	    if (l && ao->accept_network)
-		try.our_network = l;
-	    break;
-
-	case IPX_NODE_NUMBER:
-	    if (!go->neg_node || no.neg_node || (cilen != CILEN_NODEN))
-		goto bad;
-	    no.neg_node = 1;
-
-	    if (!zero_node (p) && ao->accept_local &&
-		! compare_node (p, ho->his_node))
-		copy_node (p, try.our_node);
-	    break;
-
-	    /* This has never been sent. Ignore the NAK frame */
-	case IPX_COMPRESSION_PROTOCOL:
-	    goto bad;
-
-	case IPX_ROUTER_PROTOCOL:
-	    if (!go->neg_router || (cilen < CILEN_PROTOCOL))
-		goto bad;
-
-	    GETSHORT (s, p);
-	    if (s > 15)         /* This is just bad, but ignore for now. */
-	        break;
-
-	    s = BIT(s);
-	    if (no.router & s)  /* duplicate NAKs are always bad */
-		goto bad;
-
-	    if (no.router == 0) /* Reset on first NAK only */
-		try.router = 0;
-
-	    no.router      |= s;
-	    try.router     |= s;
-	    try.neg_router  = 1;
-	    break;
-
-	    /* These, according to the RFC, must never be NAKed. */
-	case IPX_ROUTER_NAME:
-	case IPX_COMPLETE:
-	    goto bad;
-
-	    /* These are for options which we have not seen. */
-	default:
-	    break;
-	}
-	p = next;
-    }
-
-    /*
-     * Do not permit the peer to force a router protocol which we do not
-     * support. However, default to the condition that will accept "NONE".
-     */
-    try.router &= (ao->router | BIT(IPX_NONE));
-    if (try.router == 0 && ao->router != 0)
-	try.router = BIT(IPX_NONE);
-
-    if (try.router != 0)
-        try.neg_router = 1;
-    
-    /*
-     * OK, the Nak is good.  Now we can update state.
-     * If there are any options left, we ignore them.
-     */
-    if (f->state != OPENED)
-	*go = try;
-
-    return 1;
-
-bad:
-    IPXCPDEBUG(("ipxcp_nakci: received bad Nak!"));
-    return 0;
-}
-
-/*
- * ipxcp_rejci - Reject some of our CIs.
- */
-static int
-ipxcp_rejci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    u_short cilen, citype, cishort;
-    u_char cichar;
-    u_int32_t cilong;
-    ipxcp_options try;		/* options to request next time */
-
-#define REJCINETWORK(opt, neg, val) \
-    if (neg && p[0] == opt) { \
-	if ((len -= CILEN_NETN) < 0) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_NETN || \
-	    citype != opt) \
-	    break; \
-	GETLONG(cilong, p); \
-	if (cilong != val) \
-	    break; \
-	neg = 0; \
-    }
-
-#define REJCICHARS(opt, neg, val, cnt) \
-    if (neg && p[0] == opt) { \
-	int indx, count = cnt; \
-	len -= (count + 2); \
-	if (len < 0) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != (count + 2) || \
-	    citype != opt) \
-	    break; \
-	for (indx = 0; indx < count; ++indx) {\
-	    GETCHAR(cichar, p); \
-	    if (cichar != ((u_char *) &val)[indx]) \
-	       break; \
-	}\
-	if (indx != count) \
-	    break; \
-	neg = 0; \
-    }
-
-#define REJCINODE(opt,neg,val) REJCICHARS(opt,neg,val,sizeof(val))
-#define REJCINAME(opt,neg,val) REJCICHARS(opt,neg,val,strlen(val))
-
-#define REJCIVOID(opt, neg) \
-    if (neg && p[0] == opt) { \
-	if ((len -= CILEN_VOID) < 0) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_VOID || citype != opt) \
-	    break; \
-	neg = 0; \
-    }
-
-/* a reject for RIP/SAP is invalid since we don't send it and you can't
-   reject something which is not sent. (You can NAK, but you can't REJ.) */
-#define REJCIPROTO(opt, neg, val, bit) \
-    if (neg && p[0] == opt) { \
-	if ((len -= CILEN_PROTOCOL) < 0) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_PROTOCOL) \
-	    break; \
-	GETSHORT(cishort, p); \
-	if (cishort != to_external (val) || cishort == RIP_SAP) \
-	    break; \
-	neg = 0; \
-    }
-/*
- * Any Rejected CIs must be in exactly the same order that we sent.
- * Check packet length and CI length at each step.
- * If we find any deviations, then this packet is bad.
- */
-    try = *go;
-
-    do {
-	REJCINETWORK (IPX_NETWORK_NUMBER,  try.neg_nn,	   try.our_network);
-	REJCINODE    (IPX_NODE_NUMBER,	   try.neg_node,   try.our_node);
-	REJCINAME    (IPX_ROUTER_NAME,	   try.neg_name,   try.name);
-	REJCIPROTO   (IPX_ROUTER_PROTOCOL, try.neg_router, try.router, 0);
-/*
- * This is the end of the record.
- */
-	if (len == 0) {
-	    if (f->state != OPENED)
-		*go = try;
-	    return (1);
-	}
-    } while (0);
-/*
- * The frame is invalid at this point.
- */
-    IPXCPDEBUG(("ipxcp_rejci: received bad Reject!"));
-    return 0;
-}
-
-/*
- * ipxcp_reqci - Check the peer's requested CIs and send appropriate response.
- *
- * Returns: CONFACK, CONFNAK or CONFREJ and input packet modified
- * appropriately.  If reject_if_disagree is non-zero, doesn't return
- * CONFNAK; returns CONFREJ if it can't return CONFACK.
- */
-static int
-ipxcp_reqci(f, inp, len, reject_if_disagree)
-    fsm *f;
-    u_char *inp;		/* Requested CIs */
-    int *len;			/* Length of requested CIs */
-    int reject_if_disagree;
-{
-    u_char *cip, *next;		/* Pointer to current and next CIs */
-    u_short cilen, citype;	/* Parsed len, type */
-    u_short cishort;		/* Parsed short value */
-    u_int32_t cinetwork;	/* Parsed address values */
-    int rc = CONFACK;		/* Final packet return code */
-    int orc;			/* Individual option return code */
-    u_char *p;			/* Pointer to next char to parse */
-    u_char *ucp = inp;		/* Pointer to current output char */
-    int l = *len;		/* Length left */
-
-    /*
-     * Reset all his options.
-     */
-    BZERO(ho, sizeof(*ho));
-    
-    /*
-     * Process all his options.
-     */
-    next = inp;
-    while (l) {
-	orc = CONFACK;			/* Assume success */
-	cip = p = next;			/* Remember begining of CI */
-	if (l < 2 ||			/* Not enough data for CI header or */
-	    p[1] < 2 ||			/*  CI length too small or */
-	    p[1] > l) {			/*  CI length too big? */
-	    IPXCPDEBUG(("ipxcp_reqci: bad CI length!"));
-	    orc = CONFREJ;		/* Reject bad CI */
-	    cilen = l;			/* Reject till end of packet */
-	    l = 0;			/* Don't loop again */
-	    goto endswitch;
-	}
-	GETCHAR(citype, p);		/* Parse CI type */
-	GETCHAR(cilen, p);		/* Parse CI length */
-	l -= cilen;			/* Adjust remaining length */
-	next += cilen;			/* Step to next CI */
-
-	switch (citype) {		/* Check CI type */
-/*
- * The network number must match. Choose the larger of the two.
- */
-	case IPX_NETWORK_NUMBER:
-	    /* if we wont negotiate the network number or the length is wrong
-	       then reject the option */
-	    if ( !ao->neg_nn || cilen != CILEN_NETN ) {
-		orc = CONFREJ;
-		break;		
-	    }
-	    GETLONG(cinetwork, p);
-
-	    /* If the network numbers match then acknowledge them. */
-	    if (cinetwork != 0) {
-		ho->his_network = cinetwork;
-		ho->neg_nn	= 1;
-		if (wo->our_network == cinetwork)
-		    break;
-/*
- * If the network number is not given or we don't accept their change or
- * the network number is too small then NAK it.
- */
-		if (! ao->accept_network || cinetwork < wo->our_network) {
-		    DECPTR (sizeof (u_int32_t), p);
-		    PUTLONG (wo->our_network, p);
-		    orc = CONFNAK;
-		}
-		break;
-	    }
-/*
- * The peer sent '0' for the network. Give it ours if we have one.
- */
-	    if (go->our_network != 0) {
-		DECPTR (sizeof (u_int32_t), p);
-		PUTLONG (wo->our_network, p);
-		orc = CONFNAK;
-/*
- * We don't have one. Reject the value.
- */
-	    } else
-		orc = CONFREJ;
-
-	    break;
-/*
- * The node number is required
- */
-	case IPX_NODE_NUMBER:
-	    /* if we wont negotiate the node number or the length is wrong
-	       then reject the option */
-	    if ( cilen != CILEN_NODEN ) {
-		orc = CONFREJ;
-		break;
-	    }
-
-	    copy_node (p, ho->his_node);
-	    ho->neg_node = 1;
-/*
- * If the remote does not have a number and we do then NAK it with the value
- * which we have for it. (We never have a default value of zero.)
- */
-	    if (zero_node (ho->his_node)) {
-		orc = CONFNAK;
-		copy_node (wo->his_node, p);
-		INCPTR (sizeof (wo->his_node), p);
-		break;
-	    }
-/*
- * If you have given me the expected network node number then I'll accept
- * it now.
- */
-	    if (compare_node (wo->his_node, ho->his_node)) {
-		orc = CONFACK;
-		ho->neg_node = 1;
-		INCPTR (sizeof (wo->his_node), p);
-		break;
-	    }
-/*
- * If his node number is the same as ours then ask him to try the next
- * value.
- */
-	    if (compare_node (ho->his_node, go->our_node)) {
-		inc_node (ho->his_node);
-		orc = CONFNAK;
-		copy_node (ho->his_node, p);
-		INCPTR (sizeof (wo->his_node), p);
-		break;
-	    }
-/*
- * If we don't accept a new value then NAK it.
- */
-	    if (! ao->accept_remote) {
-		copy_node (wo->his_node, p);
-		INCPTR (sizeof (wo->his_node), p);
-		orc = CONFNAK;
-		break;
-	    }
-	    orc = CONFACK;
-	    ho->neg_node = 1;
-	    INCPTR (sizeof (wo->his_node), p);
-	    break;
-/*
- * Compression is not desired at this time. It is always rejected.
- */
-	case IPX_COMPRESSION_PROTOCOL:
-	    orc = CONFREJ;
-	    break;
-/*
- * The routing protocol is a bitmask of various types. Any combination
- * of the values RIP_SAP and NLSP are permissible. 'IPX_NONE' for no
- * routing protocol must be specified only once.
- */
-	case IPX_ROUTER_PROTOCOL:
-	    if ( !ao->neg_router || cilen < CILEN_PROTOCOL ) {
-		orc = CONFREJ;
-		break;		
-	    }
-
-	    GETSHORT (cishort, p);
-
-	    if (wo->neg_router == 0) {
-	        wo->neg_router = 1;
-		wo->router     = BIT(IPX_NONE);
-	    }
-
-	    if ((cishort == IPX_NONE && ho->router != 0) ||
-		(ho->router & BIT(IPX_NONE))) {
-		orc = CONFREJ;
-		break;
-	    }
-
-	    cishort = BIT(cishort);
-	    if (ho->router & cishort) {
-		orc = CONFREJ;
-		break;
-	    }
-
-	    ho->router	  |= cishort;
-	    ho->neg_router = 1;
-
-	    /* Finally do not allow a router protocol which we do not
-	       support. */
-
-	    if ((cishort & (ao->router | BIT(IPX_NONE))) == 0) {
-	        int protocol;
-
-		if (cishort == BIT(NLSP) &&
-		    (ao->router & BIT(RIP_SAP)) &&
-		    !wo->tried_rip) {
-		    protocol      = RIP_SAP;
-		    wo->tried_rip = 1;
-		} else
-		    protocol = IPX_NONE;
-
-		DECPTR (sizeof (u_int16_t), p);
-		PUTSHORT (protocol, p);
-		orc = CONFNAK;
-	    }
-	    break;
-/*
- * The router name is advisorary. Just accept it if it is not too large.
- */
-	case IPX_ROUTER_NAME:
-	    if (cilen >= CILEN_NAME) {
-		int name_size = cilen - CILEN_NAME;
-		if (name_size > sizeof (ho->name))
-		    name_size = sizeof (ho->name) - 1;
-		memset (ho->name, 0, sizeof (ho->name));
-		memcpy (ho->name, p, name_size);
-		ho->name [name_size] = '\0';
-		ho->neg_name = 1;
-		orc = CONFACK;
-		break;
-	    }
-	    orc = CONFREJ;
-	    break;
-/*
- * This is advisorary.
- */
-	case IPX_COMPLETE:
-	    if (cilen != CILEN_COMPLETE)
-		orc = CONFREJ;
-	    else {
-		ho->neg_complete = 1;
-		orc = CONFACK;
-	    }
-	    break;
-/*
- * All other entries are not known at this time.
- */
-	default:
-	    orc = CONFREJ;
-	    break;
-	}
-endswitch:
-	if (orc == CONFACK &&		/* Good CI */
-	    rc != CONFACK)		/*  but prior CI wasnt? */
-	    continue;			/* Don't send this one */
-
-	if (orc == CONFNAK) {		/* Nak this CI? */
-	    if (reject_if_disagree)	/* Getting fed up with sending NAKs? */
-		orc = CONFREJ;		/* Get tough if so */
-	    if (rc == CONFREJ)		/* Rejecting prior CI? */
-		continue;		/* Don't send this one */
-	    if (rc == CONFACK) {	/* Ack'd all prior CIs? */
-		rc  = CONFNAK;		/* Not anymore... */
-		ucp = inp;		/* Backup */
-	    }
-	}
-
-	if (orc == CONFREJ &&		/* Reject this CI */
-	    rc != CONFREJ) {		/*  but no prior ones? */
-	    rc = CONFREJ;
-	    ucp = inp;			/* Backup */
-	}
-
-	/* Need to move CI? */
-	if (ucp != cip)
-	    BCOPY(cip, ucp, cilen);	/* Move it */
-
-	/* Update output pointer */
-	INCPTR(cilen, ucp);
-    }
-
-    /*
-     * If we aren't rejecting this packet, and we want to negotiate
-     * their address, and they didn't send their address, then we
-     * send a NAK with a IPX_NODE_NUMBER option appended. We assume the
-     * input buffer is long enough that we can append the extra
-     * option safely.
-     */
-
-    if (rc != CONFREJ && !ho->neg_node &&
-	wo->req_nn && !reject_if_disagree) {
-	if (rc == CONFACK) {
-	    rc = CONFNAK;
-	    wo->req_nn = 0;		/* don't ask again */
-	    ucp = inp;			/* reset pointer */
-	}
-
-	if (zero_node (wo->his_node))
-	    inc_node (wo->his_node);
-
-	PUTCHAR (IPX_NODE_NUMBER, ucp);
-	PUTCHAR (CILEN_NODEN, ucp);
-	copy_node (wo->his_node, ucp);
-	INCPTR (sizeof (wo->his_node), ucp);
-    }
-
-    *len = ucp - inp;			/* Compute output length */
-    IPXCPDEBUG(("ipxcp: returning Configure-%s", CODENAME(rc)));
-    return (rc);			/* Return final code */
-}
-
-/*
- * ipxcp_up - IPXCP has come UP.
- *
- * Configure the IP network interface appropriately and bring it up.
- */
-
-static void
-ipxcp_up(f)
-    fsm *f;
-{
-    int unit = f->unit;
-
-    IPXCPDEBUG(("ipxcp: up"));
-
-    /* The default router protocol is RIP/SAP. */
-    if (ho->router == 0)
-        ho->router = BIT(RIP_SAP);
-
-    if (go->router == 0)
-        go->router = BIT(RIP_SAP);
-
-    /* Fetch the network number */
-    if (!ho->neg_nn)
-	ho->his_network = wo->his_network;
-
-    if (!ho->neg_node)
-	copy_node (wo->his_node, ho->his_node);
-
-    if (!wo->neg_node && !go->neg_node)
-	copy_node (wo->our_node, go->our_node);
-
-    if (zero_node (go->our_node)) {
-        static char errmsg[] = "Could not determine local IPX node address";
-	if (debug)
-	    error(errmsg);
-	ipxcp_close(f->unit, errmsg);
-	return;
-    }
-
-    go->network = go->our_network;
-    if (ho->his_network != 0 && ho->his_network > go->network)
-	go->network = ho->his_network;
-
-    if (go->network == 0) {
-        static char errmsg[] = "Can not determine network number";
-	if (debug)
-	    error(errmsg);
-	ipxcp_close (unit, errmsg);
-	return;
-    }
-
-    /* bring the interface up */
-    if (!sifup(unit)) {
-	if (debug)
-	    warn("sifup failed (IPX)");
-	ipxcp_close(unit, "Interface configuration failed");
-	return;
-    }
-    ipxcp_is_up = 1;
-
-    /* set the network number for IPX */
-    if (!sipxfaddr(unit, go->network, go->our_node)) {
-	if (debug)
-	    warn("sipxfaddr failed");
-	ipxcp_close(unit, "Interface configuration failed");
-	return;
-    }
-
-    np_up(f->unit, PPP_IPX);
-
-    /*
-     * Execute the ipx-up script, like this:
-     *	/etc/ppp/ipx-up interface tty speed local-IPX remote-IPX
-     */
-
-    ipxcp_script (f, _PATH_IPXUP);
-}
-
-/*
- * ipxcp_down - IPXCP has gone DOWN.
- *
- * Take the IP network interface down, clear its addresses
- * and delete routes through it.
- */
-
-static void
-ipxcp_down(f)
-    fsm *f;
-{
-    IPXCPDEBUG(("ipxcp: down"));
-
-    if (!ipxcp_is_up)
-	return;
-    ipxcp_is_up = 0;
-    np_down(f->unit, PPP_IPX);
-    cipxfaddr(f->unit);
-    sifnpmode(f->unit, PPP_IPX, NPMODE_DROP);
-    sifdown(f->unit);
-    ipxcp_script (f, _PATH_IPXDOWN);
-}
-
-
-/*
- * ipxcp_finished - possibly shut down the lower layers.
- */
-static void
-ipxcp_finished(f)
-    fsm *f;
-{
-    np_finished(f->unit, PPP_IPX);
-}
-
-
-/*
- * ipxcp_script - Execute a script with arguments
- * interface-name tty-name speed local-IPX remote-IPX networks.
- */
-static void
-ipxcp_script(f, script)
-    fsm *f;
-    char *script;
-{
-    char strspeed[32],	 strlocal[32],	   strremote[32];
-    char strnetwork[32], strpid[32];
-    char *argv[14],	 strproto_lcl[32], strproto_rmt[32];
-
-    slprintf(strpid, sizeof(strpid), "%d", getpid());
-    slprintf(strspeed, sizeof(strspeed),"%d", baud_rate);
-
-    strproto_lcl[0] = '\0';
-    if (go->neg_router && ((go->router & BIT(IPX_NONE)) == 0)) {
-	if (go->router & BIT(RIP_SAP))
-	    strlcpy (strproto_lcl, "RIP ", sizeof(strproto_lcl));
-	if (go->router & BIT(NLSP))
-	    strlcat (strproto_lcl, "NLSP ", sizeof(strproto_lcl));
-    }
-
-    if (strproto_lcl[0] == '\0')
-	strlcpy (strproto_lcl, "NONE ", sizeof(strproto_lcl));
-
-    strproto_lcl[strlen (strproto_lcl)-1] = '\0';
-
-    strproto_rmt[0] = '\0';
-    if (ho->neg_router && ((ho->router & BIT(IPX_NONE)) == 0)) {
-	if (ho->router & BIT(RIP_SAP))
-	    strlcpy (strproto_rmt, "RIP ", sizeof(strproto_rmt));
-	if (ho->router & BIT(NLSP))
-	    strlcat (strproto_rmt, "NLSP ", sizeof(strproto_rmt));
-    }
-
-    if (strproto_rmt[0] == '\0')
-	strlcpy (strproto_rmt, "NONE ", sizeof(strproto_rmt));
-
-    strproto_rmt[strlen (strproto_rmt)-1] = '\0';
-
-    strlcpy (strnetwork, ipx_ntoa (go->network), sizeof(strnetwork));
-
-    slprintf (strlocal, sizeof(strlocal), "%0.6B", go->our_node);
-
-    slprintf (strremote, sizeof(strremote), "%0.6B", ho->his_node);
-
-    argv[0]  = script;
-    argv[1]  = ifname;
-    argv[2]  = devnam;
-    argv[3]  = strspeed;
-    argv[4]  = strnetwork;
-    argv[5]  = strlocal;
-    argv[6]  = strremote;
-    argv[7]  = strproto_lcl;
-    argv[8]  = strproto_rmt;
-    argv[9]  = go->name;
-    argv[10] = ho->name;
-    argv[11] = ipparam;
-    argv[12] = strpid;
-    argv[13] = NULL;
-    run_program(script, argv, 0, NULL, NULL);
-}
-
-/*
- * ipxcp_printpkt - print the contents of an IPXCP packet.
- */
-static char *ipxcp_codenames[] = {
-    "ConfReq", "ConfAck", "ConfNak", "ConfRej",
-    "TermReq", "TermAck", "CodeRej"
-};
-
-static int
-ipxcp_printpkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int code, id, len, olen;
-    u_char *pstart, *optend;
-    u_short cishort;
-    u_int32_t cilong;
-
-    if (plen < HEADERLEN)
-	return 0;
-    pstart = p;
-    GETCHAR(code, p);
-    GETCHAR(id, p);
-    GETSHORT(len, p);
-    if (len < HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(ipxcp_codenames) / sizeof(char *))
-	printer(arg, " %s", ipxcp_codenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code);
-    printer(arg, " id=0x%x", id);
-    len -= HEADERLEN;
-    switch (code) {
-    case CONFREQ:
-    case CONFACK:
-    case CONFNAK:
-    case CONFREJ:
-	/* print option list */
-	while (len >= 2) {
-	    GETCHAR(code, p);
-	    GETCHAR(olen, p);
-	    p -= 2;
-	    if (olen < CILEN_VOID || olen > len) {
-		break;
-	    }
-	    printer(arg, " <");
-	    len -= olen;
-	    optend = p + olen;
-	    switch (code) {
-	    case IPX_NETWORK_NUMBER:
-		if (olen == CILEN_NETN) {
-		    p += 2;
-		    GETLONG(cilong, p);
-		    printer (arg, "network %s", ipx_ntoa (cilong));
-		}
-		break;
-	    case IPX_NODE_NUMBER:
-		if (olen == CILEN_NODEN) {
-		    p += 2;
-		    printer (arg, "node ");
-		    while (p < optend) {
-			GETCHAR(code, p);
-			printer(arg, "%.2x", (int) (unsigned int) (unsigned char) code);
-		    }
-		}
-		break;
-	    case IPX_COMPRESSION_PROTOCOL:
-		if (olen == CILEN_COMPRESS) {
-		    p += 2;
-		    GETSHORT (cishort, p);
-		    printer (arg, "compression %d", (int) cishort);
-		}
-		break;
-	    case IPX_ROUTER_PROTOCOL:
-		if (olen == CILEN_PROTOCOL) {
-		    p += 2;
-		    GETSHORT (cishort, p);
-		    printer (arg, "router proto %d", (int) cishort);
-		}
-		break;
-	    case IPX_ROUTER_NAME:
-		if (olen >= CILEN_NAME) {
-		    p += 2;
-		    printer (arg, "router name \"");
-		    while (p < optend) {
-			GETCHAR(code, p);
-			if (code >= 0x20 && code <= 0x7E)
-			    printer (arg, "%c", (int) (unsigned int) (unsigned char) code);
-			else
-			    printer (arg, " \\%.2x", (int) (unsigned int) (unsigned char) code);
-		    }
-		    printer (arg, "\"");
-		}
-		break;
-	    case IPX_COMPLETE:
-		if (olen == CILEN_COMPLETE) {
-		    p += 2;
-		    printer (arg, "complete");
-		}
-		break;
-	    default:
-		break;
-	    }
-
-	    while (p < optend) {
-		GETCHAR(code, p);
-		printer(arg, " %.2x", (int) (unsigned int) (unsigned char) code);
-	    }
-	    printer(arg, ">");
-	}
-	break;
-
-    case TERMACK:
-    case TERMREQ:
-	if (len > 0 && *p >= ' ' && *p < 0x7f) {
-	    printer(arg, " ");
-	    print_string(p, len, printer, arg);
-	    p += len;
-	    len = 0;
-	}
-	break;
-    }
-
-    /* print the rest of the bytes in the packet */
-    for (; len > 0; --len) {
-	GETCHAR(code, p);
-	printer(arg, " %.2x", (int) (unsigned int) (unsigned char) code);
-    }
-
-    return p - pstart;
-}
-#endif /* ifdef IPX_CHANGE */
diff --git a/mdk-stage1/ppp/pppd/ipxcp.h b/mdk-stage1/ppp/pppd/ipxcp.h
deleted file mode 100644
index 47f680d70..000000000
--- a/mdk-stage1/ppp/pppd/ipxcp.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * ipxcp.h - IPX Control Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Options.
- */
-#define IPX_NETWORK_NUMBER        1   /* IPX Network Number */
-#define IPX_NODE_NUMBER           2
-#define IPX_COMPRESSION_PROTOCOL  3
-#define IPX_ROUTER_PROTOCOL       4
-#define IPX_ROUTER_NAME           5
-#define IPX_COMPLETE              6
-
-/* Values for the router protocol */
-#define IPX_NONE		  0
-#define RIP_SAP			  2
-#define NLSP			  4
-
-typedef struct ipxcp_options {
-    bool neg_node;		/* Negotiate IPX node number? */
-    bool req_node;		/* Ask peer to send IPX node number? */
-
-    bool neg_nn;		/* Negotiate IPX network number? */
-    bool req_nn;		/* Ask peer to send IPX network number */
-
-    bool neg_name;		/* Negotiate IPX router name */
-    bool neg_complete;		/* Negotiate completion */
-    bool neg_router;		/* Negotiate IPX router number */
-
-    bool accept_local;		/* accept peer's value for ournode */
-    bool accept_remote;		/* accept peer's value for hisnode */
-    bool accept_network;	/* accept network number */
-
-    bool tried_nlsp;		/* I have suggested NLSP already */
-    bool tried_rip;		/* I have suggested RIP/SAP already */
-
-    u_int32_t his_network;	/* base network number */
-    u_int32_t our_network;	/* our value for network number */
-    u_int32_t network;		/* the final network number */
-
-    u_char his_node[6];		/* peer's node number */
-    u_char our_node[6];		/* our node number */
-    u_char name [48];		/* name of the router */
-    int    router;		/* routing protocol */
-} ipxcp_options;
-
-extern fsm ipxcp_fsm[];
-extern ipxcp_options ipxcp_wantoptions[];
-extern ipxcp_options ipxcp_gotoptions[];
-extern ipxcp_options ipxcp_allowoptions[];
-extern ipxcp_options ipxcp_hisoptions[];
-
-extern struct protent ipxcp_protent;
diff --git a/mdk-stage1/ppp/pppd/lcp.c b/mdk-stage1/ppp/pppd/lcp.c
deleted file mode 100644
index 41c58cad5..000000000
--- a/mdk-stage1/ppp/pppd/lcp.c
+++ /dev/null
@@ -1,2224 +0,0 @@
-/*
- * lcp.c - PPP Link Control Protocol.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-/*
- * TODO:
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "lcp.h"
-#include "chap.h"
-#include "magic.h"
-
-static const char rcsid[] = RCSID;
-
-/*
- * When the link comes up we want to be able to wait for a short while,
- * or until seeing some input from the peer, before starting to send
- * configure-requests.  We do this by delaying the fsm_lowerup call.
- */
-/* steal a bit in fsm flags word */
-#define DELAYED_UP	0x100
-
-static void lcp_delayed_up __P((void *));
-
-/*
- * LCP-related command-line options.
- */
-int	lcp_echo_interval = 0; 	/* Interval between LCP echo-requests */
-int	lcp_echo_fails = 0;	/* Tolerance to unanswered echo-requests */
-bool	lax_recv = 0;		/* accept control chars in asyncmap */
-bool	noendpoint = 0;		/* don't send/accept endpoint discriminator */
-
-static int noopt __P((char **));
-
-#ifdef HAVE_MULTILINK
-static int setendpoint __P((char **));
-static void printendpoint __P((option_t *, void (*)(void *, char *, ...),
-			       void *));
-#endif /* HAVE_MULTILINK */
-
-static option_t lcp_option_list[] = {
-    /* LCP options */
-    { "-all", o_special_noarg, (void *)noopt,
-      "Don't request/allow any LCP options" },
-
-    { "noaccomp", o_bool, &lcp_wantoptions[0].neg_accompression,
-      "Disable address/control compression",
-      OPT_A2CLR, &lcp_allowoptions[0].neg_accompression },
-    { "-ac", o_bool, &lcp_wantoptions[0].neg_accompression,
-      "Disable address/control compression",
-      OPT_ALIAS | OPT_A2CLR, &lcp_allowoptions[0].neg_accompression },
-
-    { "asyncmap", o_uint32, &lcp_wantoptions[0].asyncmap,
-      "Set asyncmap (for received packets)",
-      OPT_OR, &lcp_wantoptions[0].neg_asyncmap },
-    { "-as", o_uint32, &lcp_wantoptions[0].asyncmap,
-      "Set asyncmap (for received packets)",
-      OPT_ALIAS | OPT_OR, &lcp_wantoptions[0].neg_asyncmap },
-    { "default-asyncmap", o_uint32, &lcp_wantoptions[0].asyncmap,
-      "Disable asyncmap negotiation",
-      OPT_OR | OPT_NOARG | OPT_VAL(~0U) | OPT_A2CLR,
-      &lcp_allowoptions[0].neg_asyncmap },
-    { "-am", o_uint32, &lcp_wantoptions[0].asyncmap,
-      "Disable asyncmap negotiation",
-      OPT_ALIAS | OPT_OR | OPT_NOARG | OPT_VAL(~0U) | OPT_A2CLR,
-      &lcp_allowoptions[0].neg_asyncmap },
-
-    { "nomagic", o_bool, &lcp_wantoptions[0].neg_magicnumber,
-      "Disable magic number negotiation (looped-back line detection)",
-      OPT_A2CLR, &lcp_allowoptions[0].neg_magicnumber },
-    { "-mn", o_bool, &lcp_wantoptions[0].neg_magicnumber,
-      "Disable magic number negotiation (looped-back line detection)",
-      OPT_ALIAS | OPT_A2CLR, &lcp_allowoptions[0].neg_magicnumber },
-
-    { "mru", o_int, &lcp_wantoptions[0].mru,
-      "Set MRU (maximum received packet size) for negotiation",
-      OPT_PRIO, &lcp_wantoptions[0].neg_mru },
-    { "default-mru", o_bool, &lcp_wantoptions[0].neg_mru,
-      "Disable MRU negotiation (use default 1500)",
-      OPT_PRIOSUB | OPT_A2CLR, &lcp_allowoptions[0].neg_mru },
-    { "-mru", o_bool, &lcp_wantoptions[0].neg_mru,
-      "Disable MRU negotiation (use default 1500)",
-      OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR, &lcp_allowoptions[0].neg_mru },
-
-    { "mtu", o_int, &lcp_allowoptions[0].mru,
-      "Set our MTU", OPT_LIMITS, NULL, MAXMRU, MINMRU },
-
-    { "nopcomp", o_bool, &lcp_wantoptions[0].neg_pcompression,
-      "Disable protocol field compression",
-      OPT_A2CLR, &lcp_allowoptions[0].neg_pcompression },
-    { "-pc", o_bool, &lcp_wantoptions[0].neg_pcompression,
-      "Disable protocol field compression",
-      OPT_ALIAS | OPT_A2CLR, &lcp_allowoptions[0].neg_pcompression },
-
-    { "passive", o_bool, &lcp_wantoptions[0].passive,
-      "Set passive mode", 1 },
-    { "-p", o_bool, &lcp_wantoptions[0].passive,
-      "Set passive mode", OPT_ALIAS | 1 },
-
-    { "silent", o_bool, &lcp_wantoptions[0].silent,
-      "Set silent mode", 1 },
-
-    { "lcp-echo-failure", o_int, &lcp_echo_fails,
-      "Set number of consecutive echo failures to indicate link failure",
-      OPT_PRIO },
-    { "lcp-echo-interval", o_int, &lcp_echo_interval,
-      "Set time in seconds between LCP echo requests", OPT_PRIO },
-    { "lcp-restart", o_int, &lcp_fsm[0].timeouttime,
-      "Set time in seconds between LCP retransmissions", OPT_PRIO },
-    { "lcp-max-terminate", o_int, &lcp_fsm[0].maxtermtransmits,
-      "Set maximum number of LCP terminate-request transmissions", OPT_PRIO },
-    { "lcp-max-configure", o_int, &lcp_fsm[0].maxconfreqtransmits,
-      "Set maximum number of LCP configure-request transmissions", OPT_PRIO },
-    { "lcp-max-failure", o_int, &lcp_fsm[0].maxnakloops,
-      "Set limit on number of LCP configure-naks", OPT_PRIO },
-
-    { "receive-all", o_bool, &lax_recv,
-      "Accept all received control characters", 1 },
-
-#ifdef HAVE_MULTILINK
-    { "mrru", o_int, &lcp_wantoptions[0].mrru,
-      "Maximum received packet size for multilink bundle",
-      OPT_PRIO, &lcp_wantoptions[0].neg_mrru },
-
-    { "mpshortseq", o_bool, &lcp_wantoptions[0].neg_ssnhf,
-      "Use short sequence numbers in multilink headers",
-      OPT_PRIO | 1, &lcp_allowoptions[0].neg_ssnhf },
-    { "nompshortseq", o_bool, &lcp_wantoptions[0].neg_ssnhf,
-      "Don't use short sequence numbers in multilink headers",
-      OPT_PRIOSUB | OPT_A2CLR, &lcp_allowoptions[0].neg_ssnhf },
-
-    { "endpoint", o_special, (void *) setendpoint,
-      "Endpoint discriminator for multilink",
-      OPT_PRIO | OPT_A2PRINTER, (void *) printendpoint },
-#endif /* HAVE_MULTILINK */
-
-    { "noendpoint", o_bool, &noendpoint,
-      "Don't send or accept multilink endpoint discriminator", 1 },
-
-    {NULL}
-};
-
-/* global vars */
-fsm lcp_fsm[NUM_PPP];			/* LCP fsm structure (global)*/
-lcp_options lcp_wantoptions[NUM_PPP];	/* Options that we want to request */
-lcp_options lcp_gotoptions[NUM_PPP];	/* Options that peer ack'd */
-lcp_options lcp_allowoptions[NUM_PPP];	/* Options we allow peer to request */
-lcp_options lcp_hisoptions[NUM_PPP];	/* Options that we ack'd */
-
-static int lcp_echos_pending = 0;	/* Number of outstanding echo msgs */
-static int lcp_echo_number   = 0;	/* ID number of next echo frame */
-static int lcp_echo_timer_running = 0;  /* set if a timer is running */
-
-static u_char nak_buffer[PPP_MRU];	/* where we construct a nak packet */
-
-/*
- * Callbacks for fsm code.  (CI = Configuration Information)
- */
-static void lcp_resetci __P((fsm *));	/* Reset our CI */
-static int  lcp_cilen __P((fsm *));		/* Return length of our CI */
-static void lcp_addci __P((fsm *, u_char *, int *)); /* Add our CI to pkt */
-static int  lcp_ackci __P((fsm *, u_char *, int)); /* Peer ack'd our CI */
-static int  lcp_nakci __P((fsm *, u_char *, int)); /* Peer nak'd our CI */
-static int  lcp_rejci __P((fsm *, u_char *, int)); /* Peer rej'd our CI */
-static int  lcp_reqci __P((fsm *, u_char *, int *, int)); /* Rcv peer CI */
-static void lcp_up __P((fsm *));		/* We're UP */
-static void lcp_down __P((fsm *));		/* We're DOWN */
-static void lcp_starting __P((fsm *));	/* We need lower layer up */
-static void lcp_finished __P((fsm *));	/* We need lower layer down */
-static int  lcp_extcode __P((fsm *, int, int, u_char *, int));
-static void lcp_rprotrej __P((fsm *, u_char *, int));
-
-/*
- * routines to send LCP echos to peer
- */
-
-static void lcp_echo_lowerup __P((int));
-static void lcp_echo_lowerdown __P((int));
-static void LcpEchoTimeout __P((void *));
-static void lcp_received_echo_reply __P((fsm *, int, u_char *, int));
-static void LcpSendEchoRequest __P((fsm *));
-static void LcpLinkFailure __P((fsm *));
-static void LcpEchoCheck __P((fsm *));
-
-static fsm_callbacks lcp_callbacks = {	/* LCP callback routines */
-    lcp_resetci,		/* Reset our Configuration Information */
-    lcp_cilen,			/* Length of our Configuration Information */
-    lcp_addci,			/* Add our Configuration Information */
-    lcp_ackci,			/* ACK our Configuration Information */
-    lcp_nakci,			/* NAK our Configuration Information */
-    lcp_rejci,			/* Reject our Configuration Information */
-    lcp_reqci,			/* Request peer's Configuration Information */
-    lcp_up,			/* Called when fsm reaches OPENED state */
-    lcp_down,			/* Called when fsm leaves OPENED state */
-    lcp_starting,		/* Called when we want the lower layer up */
-    lcp_finished,		/* Called when we want the lower layer down */
-    NULL,			/* Called when Protocol-Reject received */
-    NULL,			/* Retransmission is necessary */
-    lcp_extcode,		/* Called to handle LCP-specific codes */
-    "LCP"			/* String name of protocol */
-};
-
-/*
- * Protocol entry points.
- * Some of these are called directly.
- */
-
-static void lcp_init __P((int));
-static void lcp_input __P((int, u_char *, int));
-static void lcp_protrej __P((int));
-static int  lcp_printpkt __P((u_char *, int,
-			      void (*) __P((void *, char *, ...)), void *));
-
-struct protent lcp_protent = {
-    PPP_LCP,
-    lcp_init,
-    lcp_input,
-    lcp_protrej,
-    lcp_lowerup,
-    lcp_lowerdown,
-    lcp_open,
-    lcp_close,
-    lcp_printpkt,
-    NULL,
-    1,
-    "LCP",
-    NULL,
-    lcp_option_list,
-    NULL,
-    NULL,
-    NULL
-};
-
-int lcp_loopbackfail = DEFLOOPBACKFAIL;
-
-/*
- * Length of each type of configuration option (in octets)
- */
-#define CILEN_VOID	2
-#define CILEN_CHAR	3
-#define CILEN_SHORT	4	/* CILEN_VOID + 2 */
-#define CILEN_CHAP	5	/* CILEN_VOID + 2 + 1 */
-#define CILEN_LONG	6	/* CILEN_VOID + 4 */
-#define CILEN_LQR	8	/* CILEN_VOID + 2 + 4 */
-#define CILEN_CBCP	3
-
-#define CODENAME(x)	((x) == CONFACK ? "ACK" : \
-			 (x) == CONFNAK ? "NAK" : "REJ")
-
-/*
- * noopt - Disable all options (why?).
- */
-static int
-noopt(argv)
-    char **argv;
-{
-    BZERO((char *) &lcp_wantoptions[0], sizeof (struct lcp_options));
-    BZERO((char *) &lcp_allowoptions[0], sizeof (struct lcp_options));
-
-    return (1);
-}
-
-#ifdef HAVE_MULTILINK
-static int
-setendpoint(argv)
-    char **argv;
-{
-    if (str_to_epdisc(&lcp_wantoptions[0].endpoint, *argv)) {
-	lcp_wantoptions[0].neg_endpoint = 1;
-	return 1;
-    }
-    option_error("Can't parse '%s' as an endpoint discriminator", *argv);
-    return 0;
-}
-
-static void
-printendpoint(opt, printer, arg)
-    option_t *opt;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	printer(arg, "%s", epdisc_to_str(&lcp_wantoptions[0].endpoint));
-}
-#endif /* HAVE_MULTILINK */
-
-/*
- * lcp_init - Initialize LCP.
- */
-static void
-lcp_init(unit)
-    int unit;
-{
-    fsm *f = &lcp_fsm[unit];
-    lcp_options *wo = &lcp_wantoptions[unit];
-    lcp_options *ao = &lcp_allowoptions[unit];
-
-    f->unit = unit;
-    f->protocol = PPP_LCP;
-    f->callbacks = &lcp_callbacks;
-
-    fsm_init(f);
-
-    BZERO(wo, sizeof(*wo));
-    wo->neg_mru = 1;
-    wo->mru = DEFMRU;
-    wo->neg_asyncmap = 1;
-    wo->chap_mdtype = CHAP_DIGEST_MD5;
-    wo->neg_magicnumber = 1;
-    wo->neg_pcompression = 1;
-    wo->neg_accompression = 1;
-
-    BZERO(ao, sizeof(*ao));
-    ao->neg_mru = 1;
-    ao->mru = MAXMRU;
-    ao->neg_asyncmap = 1;
-    ao->neg_chap = 1;
-    ao->chap_mdtype = CHAP_DIGEST_MD5;
-    ao->neg_upap = 1;
-    ao->neg_magicnumber = 1;
-    ao->neg_pcompression = 1;
-    ao->neg_accompression = 1;
-#ifdef CBCP_SUPPORT
-    ao->neg_cbcp = 1;
-#endif
-    ao->neg_endpoint = 1;
-}
-
-
-/*
- * lcp_open - LCP is allowed to come up.
- */
-void
-lcp_open(unit)
-    int unit;
-{
-    fsm *f = &lcp_fsm[unit];
-    lcp_options *wo = &lcp_wantoptions[unit];
-
-    f->flags &= ~(OPT_PASSIVE | OPT_SILENT);
-    if (wo->passive)
-	f->flags |= OPT_PASSIVE;
-    if (wo->silent)
-	f->flags |= OPT_SILENT;
-    fsm_open(f);
-}
-
-
-/*
- * lcp_close - Take LCP down.
- */
-void
-lcp_close(unit, reason)
-    int unit;
-    char *reason;
-{
-    fsm *f = &lcp_fsm[unit];
-
-    if (phase != PHASE_DEAD)
-	new_phase(PHASE_TERMINATE);
-    if (f->state == STOPPED && f->flags & (OPT_PASSIVE|OPT_SILENT)) {
-	/*
-	 * This action is not strictly according to the FSM in RFC1548,
-	 * but it does mean that the program terminates if you do a
-	 * lcp_close() in passive/silent mode when a connection hasn't
-	 * been established.
-	 */
-	f->state = CLOSED;
-	lcp_finished(f);
-
-    } else
-	fsm_close(&lcp_fsm[unit], reason);
-}
-
-
-/*
- * lcp_lowerup - The lower layer is up.
- */
-void
-lcp_lowerup(unit)
-    int unit;
-{
-    lcp_options *wo = &lcp_wantoptions[unit];
-    fsm *f = &lcp_fsm[unit];
-
-    /*
-     * Don't use A/C or protocol compression on transmission,
-     * but accept A/C and protocol compressed packets
-     * if we are going to ask for A/C and protocol compression.
-     */
-    ppp_send_config(unit, PPP_MRU, 0xffffffff, 0, 0);
-    ppp_recv_config(unit, PPP_MRU, (lax_recv? 0: 0xffffffff),
-		    wo->neg_pcompression, wo->neg_accompression);
-    peer_mru[unit] = PPP_MRU;
-
-    if (listen_time != 0) {
-	f->flags |= DELAYED_UP;
-	timeout(lcp_delayed_up, f, 0, listen_time * 1000);
-    } else
-	fsm_lowerup(f);
-}
-
-
-/*
- * lcp_lowerdown - The lower layer is down.
- */
-void
-lcp_lowerdown(unit)
-    int unit;
-{
-    fsm *f = &lcp_fsm[unit];
-
-    if (f->flags & DELAYED_UP)
-	f->flags &= ~DELAYED_UP;
-    else
-	fsm_lowerdown(&lcp_fsm[unit]);
-}
-
-
-/*
- * lcp_delayed_up - Bring the lower layer up now.
- */
-static void
-lcp_delayed_up(arg)
-    void *arg;
-{
-    fsm *f = arg;
-
-    if (f->flags & DELAYED_UP) {
-	f->flags &= ~DELAYED_UP;
-	fsm_lowerup(f);
-    }
-}
-
-
-/*
- * lcp_input - Input LCP packet.
- */
-static void
-lcp_input(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    fsm *f = &lcp_fsm[unit];
-
-    if (f->flags & DELAYED_UP) {
-	f->flags &= ~DELAYED_UP;
-	fsm_lowerup(f);
-    }
-    fsm_input(f, p, len);
-}
-
-
-/*
- * lcp_extcode - Handle a LCP-specific code.
- */
-static int
-lcp_extcode(f, code, id, inp, len)
-    fsm *f;
-    int code, id;
-    u_char *inp;
-    int len;
-{
-    u_char *magp;
-
-    switch( code ){
-    case PROTREJ:
-	lcp_rprotrej(f, inp, len);
-	break;
-    
-    case ECHOREQ:
-	if (f->state != OPENED)
-	    break;
-	magp = inp;
-	PUTLONG(lcp_gotoptions[f->unit].magicnumber, magp);
-	fsm_sdata(f, ECHOREP, id, inp, len);
-	break;
-    
-    case ECHOREP:
-	lcp_received_echo_reply(f, id, inp, len);
-	break;
-
-    case DISCREQ:
-	break;
-
-    default:
-	return 0;
-    }
-    return 1;
-}
-
-    
-/*
- * lcp_rprotrej - Receive an Protocol-Reject.
- *
- * Figure out which protocol is rejected and inform it.
- */
-static void
-lcp_rprotrej(f, inp, len)
-    fsm *f;
-    u_char *inp;
-    int len;
-{
-    int i;
-    struct protent *protp;
-    u_short prot;
-
-    if (len < 2) {
-	LCPDEBUG(("lcp_rprotrej: Rcvd short Protocol-Reject packet!"));
-	return;
-    }
-
-    GETSHORT(prot, inp);
-
-    /*
-     * Protocol-Reject packets received in any state other than the LCP
-     * OPENED state SHOULD be silently discarded.
-     */
-    if( f->state != OPENED ){
-	LCPDEBUG(("Protocol-Reject discarded: LCP in state %d", f->state));
-	return;
-    }
-
-    /*
-     * Upcall the proper Protocol-Reject routine.
-     */
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-	if (protp->protocol == prot && protp->enabled_flag) {
-	    (*protp->protrej)(f->unit);
-	    return;
-	}
-
-    warn("Protocol-Reject for unsupported protocol 0x%x", prot);
-}
-
-
-/*
- * lcp_protrej - A Protocol-Reject was received.
- */
-/*ARGSUSED*/
-static void
-lcp_protrej(unit)
-    int unit;
-{
-    /*
-     * Can't reject LCP!
-     */
-    error("Received Protocol-Reject for LCP!");
-    fsm_protreject(&lcp_fsm[unit]);
-}
-
-
-/*
- * lcp_sprotrej - Send a Protocol-Reject for some protocol.
- */
-void
-lcp_sprotrej(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    /*
-     * Send back the protocol and the information field of the
-     * rejected packet.  We only get here if LCP is in the OPENED state.
-     */
-    p += 2;
-    len -= 2;
-
-    fsm_sdata(&lcp_fsm[unit], PROTREJ, ++lcp_fsm[unit].id,
-	      p, len);
-}
-
-
-/*
- * lcp_resetci - Reset our CI.
- */
-static void
-lcp_resetci(f)
-    fsm *f;
-{
-    lcp_options *wo = &lcp_wantoptions[f->unit];
-    lcp_options *go = &lcp_gotoptions[f->unit];
-    lcp_options *ao = &lcp_allowoptions[f->unit];
-
-    wo->magicnumber = magic();
-    wo->numloops = 0;
-    *go = *wo;
-    if (!multilink) {
-	go->neg_mrru = 0;
-	go->neg_ssnhf = 0;
-	go->neg_endpoint = 0;
-    }
-    if (noendpoint)
-	ao->neg_endpoint = 0;
-    peer_mru[f->unit] = PPP_MRU;
-    auth_reset(f->unit);
-}
-
-
-/*
- * lcp_cilen - Return length of our CI.
- */
-static int
-lcp_cilen(f)
-    fsm *f;
-{
-    lcp_options *go = &lcp_gotoptions[f->unit];
-
-#define LENCIVOID(neg)	((neg) ? CILEN_VOID : 0)
-#define LENCICHAP(neg)	((neg) ? CILEN_CHAP : 0)
-#define LENCISHORT(neg)	((neg) ? CILEN_SHORT : 0)
-#define LENCILONG(neg)	((neg) ? CILEN_LONG : 0)
-#define LENCILQR(neg)	((neg) ? CILEN_LQR: 0)
-#define LENCICBCP(neg)	((neg) ? CILEN_CBCP: 0)
-    /*
-     * NB: we only ask for one of CHAP and UPAP, even if we will
-     * accept either.
-     */
-    return (LENCISHORT(go->neg_mru && go->mru != DEFMRU) +
-	    LENCILONG(go->neg_asyncmap && go->asyncmap != 0xFFFFFFFF) +
-	    LENCICHAP(go->neg_chap) +
-	    LENCISHORT(!go->neg_chap && go->neg_upap) +
-	    LENCILQR(go->neg_lqr) +
-	    LENCICBCP(go->neg_cbcp) +
-	    LENCILONG(go->neg_magicnumber) +
-	    LENCIVOID(go->neg_pcompression) +
-	    LENCIVOID(go->neg_accompression) +
-	    LENCISHORT(go->neg_mrru) +
-	    LENCIVOID(go->neg_ssnhf) +
-	    (go->neg_endpoint? CILEN_CHAR + go->endpoint.length: 0));
-}
-
-
-/*
- * lcp_addci - Add our desired CIs to a packet.
- */
-static void
-lcp_addci(f, ucp, lenp)
-    fsm *f;
-    u_char *ucp;
-    int *lenp;
-{
-    lcp_options *go = &lcp_gotoptions[f->unit];
-    u_char *start_ucp = ucp;
-
-#define ADDCIVOID(opt, neg) \
-    if (neg) { \
-	PUTCHAR(opt, ucp); \
-	PUTCHAR(CILEN_VOID, ucp); \
-    }
-#define ADDCISHORT(opt, neg, val) \
-    if (neg) { \
-	PUTCHAR(opt, ucp); \
-	PUTCHAR(CILEN_SHORT, ucp); \
-	PUTSHORT(val, ucp); \
-    }
-#define ADDCICHAP(opt, neg, val, digest) \
-    if (neg) { \
-	PUTCHAR(opt, ucp); \
-	PUTCHAR(CILEN_CHAP, ucp); \
-	PUTSHORT(val, ucp); \
-	PUTCHAR(digest, ucp); \
-    }
-#define ADDCILONG(opt, neg, val) \
-    if (neg) { \
-	PUTCHAR(opt, ucp); \
-	PUTCHAR(CILEN_LONG, ucp); \
-	PUTLONG(val, ucp); \
-    }
-#define ADDCILQR(opt, neg, val) \
-    if (neg) { \
-	PUTCHAR(opt, ucp); \
-	PUTCHAR(CILEN_LQR, ucp); \
-	PUTSHORT(PPP_LQR, ucp); \
-	PUTLONG(val, ucp); \
-    }
-#define ADDCICHAR(opt, neg, val) \
-    if (neg) { \
-	PUTCHAR(opt, ucp); \
-	PUTCHAR(CILEN_CHAR, ucp); \
-	PUTCHAR(val, ucp); \
-    }
-#define ADDCIENDP(opt, neg, class, val, len) \
-    if (neg) { \
-	int i; \
-	PUTCHAR(opt, ucp); \
-	PUTCHAR(CILEN_CHAR + len, ucp); \
-	PUTCHAR(class, ucp); \
-	for (i = 0; i < len; ++i) \
-	    PUTCHAR(val[i], ucp); \
-    }
-
-    ADDCISHORT(CI_MRU, go->neg_mru && go->mru != DEFMRU, go->mru);
-    ADDCILONG(CI_ASYNCMAP, go->neg_asyncmap && go->asyncmap != 0xFFFFFFFF,
-	      go->asyncmap);
-    ADDCICHAP(CI_AUTHTYPE, go->neg_chap, PPP_CHAP, go->chap_mdtype);
-    ADDCISHORT(CI_AUTHTYPE, !go->neg_chap && go->neg_upap, PPP_PAP);
-    ADDCILQR(CI_QUALITY, go->neg_lqr, go->lqr_period);
-    ADDCICHAR(CI_CALLBACK, go->neg_cbcp, CBCP_OPT);
-    ADDCILONG(CI_MAGICNUMBER, go->neg_magicnumber, go->magicnumber);
-    ADDCIVOID(CI_PCOMPRESSION, go->neg_pcompression);
-    ADDCIVOID(CI_ACCOMPRESSION, go->neg_accompression);
-    ADDCISHORT(CI_MRRU, go->neg_mrru, go->mrru);
-    ADDCIVOID(CI_SSNHF, go->neg_ssnhf);
-    ADDCIENDP(CI_EPDISC, go->neg_endpoint, go->endpoint.class,
-	      go->endpoint.value, go->endpoint.length);
-
-    if (ucp - start_ucp != *lenp) {
-	/* this should never happen, because peer_mtu should be 1500 */
-	error("Bug in lcp_addci: wrong length");
-    }
-}
-
-
-/*
- * lcp_ackci - Ack our CIs.
- * This should not modify any state if the Ack is bad.
- *
- * Returns:
- *	0 - Ack was bad.
- *	1 - Ack was good.
- */
-static int
-lcp_ackci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    lcp_options *go = &lcp_gotoptions[f->unit];
-    u_char cilen, citype, cichar;
-    u_short cishort;
-    u_int32_t cilong;
-
-    /*
-     * CIs must be in exactly the same order that we sent.
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-#define ACKCIVOID(opt, neg) \
-    if (neg) { \
-	if ((len -= CILEN_VOID) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_VOID || \
-	    citype != opt) \
-	    goto bad; \
-    }
-#define ACKCISHORT(opt, neg, val) \
-    if (neg) { \
-	if ((len -= CILEN_SHORT) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_SHORT || \
-	    citype != opt) \
-	    goto bad; \
-	GETSHORT(cishort, p); \
-	if (cishort != val) \
-	    goto bad; \
-    }
-#define ACKCICHAR(opt, neg, val) \
-    if (neg) { \
-	if ((len -= CILEN_CHAR) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_CHAR || \
-	    citype != opt) \
-	    goto bad; \
-	GETCHAR(cichar, p); \
-	if (cichar != val) \
-	    goto bad; \
-    }
-#define ACKCICHAP(opt, neg, val, digest) \
-    if (neg) { \
-	if ((len -= CILEN_CHAP) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_CHAP || \
-	    citype != opt) \
-	    goto bad; \
-	GETSHORT(cishort, p); \
-	if (cishort != val) \
-	    goto bad; \
-	GETCHAR(cichar, p); \
-	if (cichar != digest) \
-	  goto bad; \
-    }
-#define ACKCILONG(opt, neg, val) \
-    if (neg) { \
-	if ((len -= CILEN_LONG) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_LONG || \
-	    citype != opt) \
-	    goto bad; \
-	GETLONG(cilong, p); \
-	if (cilong != val) \
-	    goto bad; \
-    }
-#define ACKCILQR(opt, neg, val) \
-    if (neg) { \
-	if ((len -= CILEN_LQR) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_LQR || \
-	    citype != opt) \
-	    goto bad; \
-	GETSHORT(cishort, p); \
-	if (cishort != PPP_LQR) \
-	    goto bad; \
-	GETLONG(cilong, p); \
-	if (cilong != val) \
-	  goto bad; \
-    }
-#define ACKCIENDP(opt, neg, class, val, vlen) \
-    if (neg) { \
-	int i; \
-	if ((len -= CILEN_CHAR + vlen) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_CHAR + vlen || \
-	    citype != opt) \
-	    goto bad; \
-	GETCHAR(cichar, p); \
-	if (cichar != class) \
-	    goto bad; \
-	for (i = 0; i < vlen; ++i) { \
-	    GETCHAR(cichar, p); \
-	    if (cichar != val[i]) \
-		goto bad; \
-	} \
-    }
-
-    ACKCISHORT(CI_MRU, go->neg_mru && go->mru != DEFMRU, go->mru);
-    ACKCILONG(CI_ASYNCMAP, go->neg_asyncmap && go->asyncmap != 0xFFFFFFFF,
-	      go->asyncmap);
-    ACKCICHAP(CI_AUTHTYPE, go->neg_chap, PPP_CHAP, go->chap_mdtype);
-    ACKCISHORT(CI_AUTHTYPE, !go->neg_chap && go->neg_upap, PPP_PAP);
-    ACKCILQR(CI_QUALITY, go->neg_lqr, go->lqr_period);
-    ACKCICHAR(CI_CALLBACK, go->neg_cbcp, CBCP_OPT);
-    ACKCILONG(CI_MAGICNUMBER, go->neg_magicnumber, go->magicnumber);
-    ACKCIVOID(CI_PCOMPRESSION, go->neg_pcompression);
-    ACKCIVOID(CI_ACCOMPRESSION, go->neg_accompression);
-    ACKCISHORT(CI_MRRU, go->neg_mrru, go->mrru);
-    ACKCIVOID(CI_SSNHF, go->neg_ssnhf);
-    ACKCIENDP(CI_EPDISC, go->neg_endpoint, go->endpoint.class,
-	      go->endpoint.value, go->endpoint.length);
-
-    /*
-     * If there are any remaining CIs, then this packet is bad.
-     */
-    if (len != 0)
-	goto bad;
-    return (1);
-bad:
-    LCPDEBUG(("lcp_acki: received bad Ack!"));
-    return (0);
-}
-
-
-/*
- * lcp_nakci - Peer has sent a NAK for some of our CIs.
- * This should not modify any state if the Nak is bad
- * or if LCP is in the OPENED state.
- *
- * Returns:
- *	0 - Nak was bad.
- *	1 - Nak was good.
- */
-static int
-lcp_nakci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    lcp_options *go = &lcp_gotoptions[f->unit];
-    lcp_options *wo = &lcp_wantoptions[f->unit];
-    u_char citype, cichar, *next;
-    u_short cishort;
-    u_int32_t cilong;
-    lcp_options no;		/* options we've seen Naks for */
-    lcp_options try;		/* options to request next time */
-    int looped_back = 0;
-    int cilen;
-
-    BZERO(&no, sizeof(no));
-    try = *go;
-
-    /*
-     * Any Nak'd CIs must be in exactly the same order that we sent.
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-#define NAKCIVOID(opt, neg) \
-    if (go->neg && \
-	len >= CILEN_VOID && \
-	p[1] == CILEN_VOID && \
-	p[0] == opt) { \
-	len -= CILEN_VOID; \
-	INCPTR(CILEN_VOID, p); \
-	no.neg = 1; \
-	try.neg = 0; \
-    }
-#define NAKCICHAP(opt, neg, code) \
-    if (go->neg && \
-	len >= CILEN_CHAP && \
-	p[1] == CILEN_CHAP && \
-	p[0] == opt) { \
-	len -= CILEN_CHAP; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	GETCHAR(cichar, p); \
-	no.neg = 1; \
-	code \
-    }
-#define NAKCICHAR(opt, neg, code) \
-    if (go->neg && \
-	len >= CILEN_CHAR && \
-	p[1] == CILEN_CHAR && \
-	p[0] == opt) { \
-	len -= CILEN_CHAR; \
-	INCPTR(2, p); \
-	GETCHAR(cichar, p); \
-	no.neg = 1; \
-	code \
-    }
-#define NAKCISHORT(opt, neg, code) \
-    if (go->neg && \
-	len >= CILEN_SHORT && \
-	p[1] == CILEN_SHORT && \
-	p[0] == opt) { \
-	len -= CILEN_SHORT; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	no.neg = 1; \
-	code \
-    }
-#define NAKCILONG(opt, neg, code) \
-    if (go->neg && \
-	len >= CILEN_LONG && \
-	p[1] == CILEN_LONG && \
-	p[0] == opt) { \
-	len -= CILEN_LONG; \
-	INCPTR(2, p); \
-	GETLONG(cilong, p); \
-	no.neg = 1; \
-	code \
-    }
-#define NAKCILQR(opt, neg, code) \
-    if (go->neg && \
-	len >= CILEN_LQR && \
-	p[1] == CILEN_LQR && \
-	p[0] == opt) { \
-	len -= CILEN_LQR; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	GETLONG(cilong, p); \
-	no.neg = 1; \
-	code \
-    }
-#define NAKCIENDP(opt, neg) \
-    if (go->neg && \
-	len >= CILEN_CHAR && \
-	p[0] == opt && \
-	p[1] >= CILEN_CHAR && \
-	p[1] <= len) { \
-	len -= p[1]; \
-	INCPTR(p[1], p); \
-	no.neg = 1; \
-	try.neg = 0; \
-    }
-
-    /*
-     * We don't care if they want to send us smaller packets than
-     * we want.  Therefore, accept any MRU less than what we asked for,
-     * but then ignore the new value when setting the MRU in the kernel.
-     * If they send us a bigger MRU than what we asked, accept it, up to
-     * the limit of the default MRU we'd get if we didn't negotiate.
-     */
-    if (go->neg_mru && go->mru != DEFMRU) {
-	NAKCISHORT(CI_MRU, neg_mru,
-		   if (cishort <= wo->mru || cishort <= DEFMRU)
-		       try.mru = cishort;
-		   );
-    }
-
-    /*
-     * Add any characters they want to our (receive-side) asyncmap.
-     */
-    if (go->neg_asyncmap && go->asyncmap != 0xFFFFFFFF) {
-	NAKCILONG(CI_ASYNCMAP, neg_asyncmap,
-		  try.asyncmap = go->asyncmap | cilong;
-		  );
-    }
-
-    /*
-     * If they've nak'd our authentication-protocol, check whether
-     * they are proposing a different protocol, or a different
-     * hash algorithm for CHAP.
-     */
-    if ((go->neg_chap || go->neg_upap)
-	&& len >= CILEN_SHORT
-	&& p[0] == CI_AUTHTYPE && p[1] >= CILEN_SHORT && p[1] <= len) {
-	cilen = p[1];
-	len -= cilen;
-	no.neg_chap = go->neg_chap;
-	no.neg_upap = go->neg_upap;
-	INCPTR(2, p);
-        GETSHORT(cishort, p);
-	if (cishort == PPP_PAP && cilen == CILEN_SHORT) {
-	    /*
-	     * If we were asking for CHAP, they obviously don't want to do it.
-	     * If we weren't asking for CHAP, then we were asking for PAP,
-	     * in which case this Nak is bad.
-	     */
-	    if (!go->neg_chap)
-		goto bad;
-	    try.neg_chap = 0;
-
-	} else if (cishort == PPP_CHAP && cilen == CILEN_CHAP) {
-	    GETCHAR(cichar, p);
-	    if (go->neg_chap) {
-		/*
-		 * We were asking for CHAP/MD5; they must want a different
-		 * algorithm.  If they can't do MD5, we can ask for M$-CHAP
-		 * if we support it, otherwise we'll have to stop
-		 * asking for CHAP.
-		 */
-		if (cichar != go->chap_mdtype) {
-#ifdef CHAPMS
-		    if (cichar == CHAP_MICROSOFT)
-			go->chap_mdtype = CHAP_MICROSOFT;
-		    else
-#endif /* CHAPMS */
-			try.neg_chap = 0;
-		}
-	    } else {
-		/*
-		 * Stop asking for PAP if we were asking for it.
-		 */
-		try.neg_upap = 0;
-	    }
-
-	} else {
-	    /*
-	     * We don't recognize what they're suggesting.
-	     * Stop asking for what we were asking for.
-	     */
-	    if (go->neg_chap)
-		try.neg_chap = 0;
-	    else
-		try.neg_upap = 0;
-	    p += cilen - CILEN_SHORT;
-	}
-    }
-
-    /*
-     * If they can't cope with our link quality protocol, we'll have
-     * to stop asking for LQR.  We haven't got any other protocol.
-     * If they Nak the reporting period, take their value XXX ?
-     */
-    NAKCILQR(CI_QUALITY, neg_lqr,
-	     if (cishort != PPP_LQR)
-		 try.neg_lqr = 0;
-	     else
-		 try.lqr_period = cilong;
-	     );
-
-    /*
-     * Only implementing CBCP...not the rest of the callback options
-     */
-    NAKCICHAR(CI_CALLBACK, neg_cbcp,
-              try.neg_cbcp = 0;
-              );
-
-    /*
-     * Check for a looped-back line.
-     */
-    NAKCILONG(CI_MAGICNUMBER, neg_magicnumber,
-	      try.magicnumber = magic();
-	      looped_back = 1;
-	      );
-
-    /*
-     * Peer shouldn't send Nak for protocol compression or
-     * address/control compression requests; they should send
-     * a Reject instead.  If they send a Nak, treat it as a Reject.
-     */
-    NAKCIVOID(CI_PCOMPRESSION, neg_pcompression);
-    NAKCIVOID(CI_ACCOMPRESSION, neg_accompression);
-
-    /*
-     * Nak for MRRU option - accept their value if it is smaller
-     * than the one we want.
-     */
-    if (go->neg_mrru) {
-	NAKCISHORT(CI_MRRU, neg_mrru,
-		   if (cishort <= wo->mrru)
-		       try.mrru = cishort;
-		   );
-    }
-
-    /*
-     * Nak for short sequence numbers shouldn't be sent, treat it
-     * like a reject.
-     */
-    NAKCIVOID(CI_SSNHF, neg_ssnhf);
-
-    /*
-     * Nak of the endpoint discriminator option is not permitted,
-     * treat it like a reject.
-     */
-    NAKCIENDP(CI_EPDISC, neg_endpoint);
-
-    /*
-     * There may be remaining CIs, if the peer is requesting negotiation
-     * on an option that we didn't include in our request packet.
-     * If we see an option that we requested, or one we've already seen
-     * in this packet, then this packet is bad.
-     * If we wanted to respond by starting to negotiate on the requested
-     * option(s), we could, but we don't, because except for the
-     * authentication type and quality protocol, if we are not negotiating
-     * an option, it is because we were told not to.
-     * For the authentication type, the Nak from the peer means
-     * `let me authenticate myself with you' which is a bit pointless.
-     * For the quality protocol, the Nak means `ask me to send you quality
-     * reports', but if we didn't ask for them, we don't want them.
-     * An option we don't recognize represents the peer asking to
-     * negotiate some option we don't support, so ignore it.
-     */
-    while (len > CILEN_VOID) {
-	GETCHAR(citype, p);
-	GETCHAR(cilen, p);
-	if (cilen < CILEN_VOID || (len -= cilen) < 0)
-	    goto bad;
-	next = p + cilen - 2;
-
-	switch (citype) {
-	case CI_MRU:
-	    if ((go->neg_mru && go->mru != DEFMRU)
-		|| no.neg_mru || cilen != CILEN_SHORT)
-		goto bad;
-	    GETSHORT(cishort, p);
-	    if (cishort < DEFMRU) {
-		try.neg_mru = 1;
-		try.mru = cishort;
-	    }
-	    break;
-	case CI_ASYNCMAP:
-	    if ((go->neg_asyncmap && go->asyncmap != 0xFFFFFFFF)
-		|| no.neg_asyncmap || cilen != CILEN_LONG)
-		goto bad;
-	    break;
-	case CI_AUTHTYPE:
-	    if (go->neg_chap || no.neg_chap || go->neg_upap || no.neg_upap)
-		goto bad;
-	    break;
-	case CI_MAGICNUMBER:
-	    if (go->neg_magicnumber || no.neg_magicnumber ||
-		cilen != CILEN_LONG)
-		goto bad;
-	    break;
-	case CI_PCOMPRESSION:
-	    if (go->neg_pcompression || no.neg_pcompression
-		|| cilen != CILEN_VOID)
-		goto bad;
-	    break;
-	case CI_ACCOMPRESSION:
-	    if (go->neg_accompression || no.neg_accompression
-		|| cilen != CILEN_VOID)
-		goto bad;
-	    break;
-	case CI_QUALITY:
-	    if (go->neg_lqr || no.neg_lqr || cilen != CILEN_LQR)
-		goto bad;
-	    break;
-	case CI_MRRU:
-	    if (go->neg_mrru || no.neg_mrru || cilen != CILEN_SHORT)
-		goto bad;
-	    break;
-	case CI_SSNHF:
-	    if (go->neg_ssnhf || no.neg_ssnhf || cilen != CILEN_VOID)
-		goto bad;
-	    try.neg_ssnhf = 1;
-	    break;
-	case CI_EPDISC:
-	    if (go->neg_endpoint || no.neg_endpoint || cilen < CILEN_CHAR)
-		goto bad;
-	    break;
-	}
-	p = next;
-    }
-
-    /*
-     * OK, the Nak is good.  Now we can update state.
-     * If there are any options left we ignore them.
-     */
-    if (f->state != OPENED) {
-	if (looped_back) {
-	    if (++try.numloops >= lcp_loopbackfail) {
-		notice("Serial line is looped back.");
-		lcp_close(f->unit, "Loopback detected");
-		status = EXIT_LOOPBACK;
-	    }
-	} else
-	    try.numloops = 0;
-	*go = try;
-    }
-
-    return 1;
-
-bad:
-    LCPDEBUG(("lcp_nakci: received bad Nak!"));
-    return 0;
-}
-
-
-/*
- * lcp_rejci - Peer has Rejected some of our CIs.
- * This should not modify any state if the Reject is bad
- * or if LCP is in the OPENED state.
- *
- * Returns:
- *	0 - Reject was bad.
- *	1 - Reject was good.
- */
-static int
-lcp_rejci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    lcp_options *go = &lcp_gotoptions[f->unit];
-    u_char cichar;
-    u_short cishort;
-    u_int32_t cilong;
-    lcp_options try;		/* options to request next time */
-
-    try = *go;
-
-    /*
-     * Any Rejected CIs must be in exactly the same order that we sent.
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-#define REJCIVOID(opt, neg) \
-    if (go->neg && \
-	len >= CILEN_VOID && \
-	p[1] == CILEN_VOID && \
-	p[0] == opt) { \
-	len -= CILEN_VOID; \
-	INCPTR(CILEN_VOID, p); \
-	try.neg = 0; \
-    }
-#define REJCISHORT(opt, neg, val) \
-    if (go->neg && \
-	len >= CILEN_SHORT && \
-	p[1] == CILEN_SHORT && \
-	p[0] == opt) { \
-	len -= CILEN_SHORT; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	/* Check rejected value. */ \
-	if (cishort != val) \
-	    goto bad; \
-	try.neg = 0; \
-    }
-#define REJCICHAP(opt, neg, val, digest) \
-    if (go->neg && \
-	len >= CILEN_CHAP && \
-	p[1] == CILEN_CHAP && \
-	p[0] == opt) { \
-	len -= CILEN_CHAP; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	GETCHAR(cichar, p); \
-	/* Check rejected value. */ \
-	if (cishort != val || cichar != digest) \
-	    goto bad; \
-	try.neg = 0; \
-	try.neg_upap = 0; \
-    }
-#define REJCILONG(opt, neg, val) \
-    if (go->neg && \
-	len >= CILEN_LONG && \
-	p[1] == CILEN_LONG && \
-	p[0] == opt) { \
-	len -= CILEN_LONG; \
-	INCPTR(2, p); \
-	GETLONG(cilong, p); \
-	/* Check rejected value. */ \
-	if (cilong != val) \
-	    goto bad; \
-	try.neg = 0; \
-    }
-#define REJCILQR(opt, neg, val) \
-    if (go->neg && \
-	len >= CILEN_LQR && \
-	p[1] == CILEN_LQR && \
-	p[0] == opt) { \
-	len -= CILEN_LQR; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	GETLONG(cilong, p); \
-	/* Check rejected value. */ \
-	if (cishort != PPP_LQR || cilong != val) \
-	    goto bad; \
-	try.neg = 0; \
-    }
-#define REJCICBCP(opt, neg, val) \
-    if (go->neg && \
-	len >= CILEN_CBCP && \
-	p[1] == CILEN_CBCP && \
-	p[0] == opt) { \
-	len -= CILEN_CBCP; \
-	INCPTR(2, p); \
-	GETCHAR(cichar, p); \
-	/* Check rejected value. */ \
-	if (cichar != val) \
-	    goto bad; \
-	try.neg = 0; \
-    }
-#define REJCIENDP(opt, neg, class, val, vlen) \
-    if (go->neg && \
-	len >= CILEN_CHAR + vlen && \
-	p[0] == opt && \
-	p[1] == CILEN_CHAR + vlen) { \
-	int i; \
-	len -= CILEN_CHAR + vlen; \
-	INCPTR(2, p); \
-	GETCHAR(cichar, p); \
-	if (cichar != class) \
-	    goto bad; \
-	for (i = 0; i < vlen; ++i) { \
-	    GETCHAR(cichar, p); \
-	    if (cichar != val[i]) \
-		goto bad; \
-	} \
-	try.neg = 0; \
-    }
-
-    REJCISHORT(CI_MRU, neg_mru, go->mru);
-    REJCILONG(CI_ASYNCMAP, neg_asyncmap, go->asyncmap);
-    REJCICHAP(CI_AUTHTYPE, neg_chap, PPP_CHAP, go->chap_mdtype);
-    if (!go->neg_chap) {
-	REJCISHORT(CI_AUTHTYPE, neg_upap, PPP_PAP);
-    }
-    REJCILQR(CI_QUALITY, neg_lqr, go->lqr_period);
-    REJCICBCP(CI_CALLBACK, neg_cbcp, CBCP_OPT);
-    REJCILONG(CI_MAGICNUMBER, neg_magicnumber, go->magicnumber);
-    REJCIVOID(CI_PCOMPRESSION, neg_pcompression);
-    REJCIVOID(CI_ACCOMPRESSION, neg_accompression);
-    REJCISHORT(CI_MRRU, neg_mrru, go->mrru);
-    REJCIVOID(CI_SSNHF, neg_ssnhf);
-    REJCIENDP(CI_EPDISC, neg_endpoint, go->endpoint.class,
-	      go->endpoint.value, go->endpoint.length);
-
-    /*
-     * If there are any remaining CIs, then this packet is bad.
-     */
-    if (len != 0)
-	goto bad;
-    /*
-     * Now we can update state.
-     */
-    if (f->state != OPENED)
-	*go = try;
-    return 1;
-
-bad:
-    LCPDEBUG(("lcp_rejci: received bad Reject!"));
-    return 0;
-}
-
-
-/*
- * lcp_reqci - Check the peer's requested CIs and send appropriate response.
- *
- * Returns: CONFACK, CONFNAK or CONFREJ and input packet modified
- * appropriately.  If reject_if_disagree is non-zero, doesn't return
- * CONFNAK; returns CONFREJ if it can't return CONFACK.
- */
-static int
-lcp_reqci(f, inp, lenp, reject_if_disagree)
-    fsm *f;
-    u_char *inp;		/* Requested CIs */
-    int *lenp;			/* Length of requested CIs */
-    int reject_if_disagree;
-{
-    lcp_options *go = &lcp_gotoptions[f->unit];
-    lcp_options *ho = &lcp_hisoptions[f->unit];
-    lcp_options *ao = &lcp_allowoptions[f->unit];
-    u_char *cip, *next;		/* Pointer to current and next CIs */
-    int cilen, citype, cichar;	/* Parsed len, type, char value */
-    u_short cishort;		/* Parsed short value */
-    u_int32_t cilong;		/* Parse long value */
-    int rc = CONFACK;		/* Final packet return code */
-    int orc;			/* Individual option return code */
-    u_char *p;			/* Pointer to next char to parse */
-    u_char *rejp;		/* Pointer to next char in reject frame */
-    u_char *nakp;		/* Pointer to next char in Nak frame */
-    int l = *lenp;		/* Length left */
-
-    /*
-     * Reset all his options.
-     */
-    BZERO(ho, sizeof(*ho));
-
-    /*
-     * Process all his options.
-     */
-    next = inp;
-    nakp = nak_buffer;
-    rejp = inp;
-    while (l) {
-	orc = CONFACK;			/* Assume success */
-	cip = p = next;			/* Remember begining of CI */
-	if (l < 2 ||			/* Not enough data for CI header or */
-	    p[1] < 2 ||			/*  CI length too small or */
-	    p[1] > l) {			/*  CI length too big? */
-	    LCPDEBUG(("lcp_reqci: bad CI length!"));
-	    orc = CONFREJ;		/* Reject bad CI */
-	    cilen = l;			/* Reject till end of packet */
-	    l = 0;			/* Don't loop again */
-	    citype = 0;
-	    goto endswitch;
-	}
-	GETCHAR(citype, p);		/* Parse CI type */
-	GETCHAR(cilen, p);		/* Parse CI length */
-	l -= cilen;			/* Adjust remaining length */
-	next += cilen;			/* Step to next CI */
-
-	switch (citype) {		/* Check CI type */
-	case CI_MRU:
-	    if (!ao->neg_mru ||		/* Allow option? */
-		cilen != CILEN_SHORT) {	/* Check CI length */
-		orc = CONFREJ;		/* Reject CI */
-		break;
-	    }
-	    GETSHORT(cishort, p);	/* Parse MRU */
-
-	    /*
-	     * He must be able to receive at least our minimum.
-	     * No need to check a maximum.  If he sends a large number,
-	     * we'll just ignore it.
-	     */
-	    if (cishort < MINMRU) {
-		orc = CONFNAK;		/* Nak CI */
-		PUTCHAR(CI_MRU, nakp);
-		PUTCHAR(CILEN_SHORT, nakp);
-		PUTSHORT(MINMRU, nakp);	/* Give him a hint */
-		break;
-	    }
-	    ho->neg_mru = 1;		/* Remember he sent MRU */
-	    ho->mru = cishort;		/* And remember value */
-	    break;
-
-	case CI_ASYNCMAP:
-	    if (!ao->neg_asyncmap ||
-		cilen != CILEN_LONG) {
-		orc = CONFREJ;
-		break;
-	    }
-	    GETLONG(cilong, p);
-
-	    /*
-	     * Asyncmap must have set at least the bits
-	     * which are set in lcp_allowoptions[unit].asyncmap.
-	     */
-	    if ((ao->asyncmap & ~cilong) != 0) {
-		orc = CONFNAK;
-		PUTCHAR(CI_ASYNCMAP, nakp);
-		PUTCHAR(CILEN_LONG, nakp);
-		PUTLONG(ao->asyncmap | cilong, nakp);
-		break;
-	    }
-	    ho->neg_asyncmap = 1;
-	    ho->asyncmap = cilong;
-	    break;
-
-	case CI_AUTHTYPE:
-	    if (cilen < CILEN_SHORT ||
-		!(ao->neg_upap || ao->neg_chap)) {
-		/*
-		 * Reject the option if we're not willing to authenticate.
-		 */
-		orc = CONFREJ;
-		break;
-	    }
-	    GETSHORT(cishort, p);
-
-	    /*
-	     * Authtype must be PAP or CHAP.
-	     *
-	     * Note: if both ao->neg_upap and ao->neg_chap are set,
-	     * and the peer sends a Configure-Request with two
-	     * authenticate-protocol requests, one for CHAP and one
-	     * for UPAP, then we will reject the second request.
-	     * Whether we end up doing CHAP or UPAP depends then on
-	     * the ordering of the CIs in the peer's Configure-Request.
-	     */
-
-	    if (cishort == PPP_PAP) {
-		if (ho->neg_chap ||	/* we've already accepted CHAP */
-		    cilen != CILEN_SHORT) {
-		    LCPDEBUG(("lcp_reqci: rcvd AUTHTYPE PAP, rejecting..."));
-		    orc = CONFREJ;
-		    break;
-		}
-		if (!ao->neg_upap) {	/* we don't want to do PAP */
-		    orc = CONFNAK;	/* NAK it and suggest CHAP */
-		    PUTCHAR(CI_AUTHTYPE, nakp);
-		    PUTCHAR(CILEN_CHAP, nakp);
-		    PUTSHORT(PPP_CHAP, nakp);
-		    PUTCHAR(ao->chap_mdtype, nakp);
-		    /* XXX if we can do CHAP_MICROSOFT as well, we should
-		       probably put in another option saying so */
-		    break;
-		}
-		ho->neg_upap = 1;
-		break;
-	    }
-	    if (cishort == PPP_CHAP) {
-		if (ho->neg_upap ||	/* we've already accepted PAP */
-		    cilen != CILEN_CHAP) {
-		    LCPDEBUG(("lcp_reqci: rcvd AUTHTYPE CHAP, rejecting..."));
-		    orc = CONFREJ;
-		    break;
-		}
-		if (!ao->neg_chap) {	/* we don't want to do CHAP */
-		    orc = CONFNAK;	/* NAK it and suggest PAP */
-		    PUTCHAR(CI_AUTHTYPE, nakp);
-		    PUTCHAR(CILEN_SHORT, nakp);
-		    PUTSHORT(PPP_PAP, nakp);
-		    break;
-		}
-		GETCHAR(cichar, p);	/* get digest type*/
-		if (cichar != CHAP_DIGEST_MD5
-#ifdef CHAPMS
-		    && cichar != CHAP_MICROSOFT
-#endif
-		    ) {
-		    orc = CONFNAK;
-		    PUTCHAR(CI_AUTHTYPE, nakp);
-		    PUTCHAR(CILEN_CHAP, nakp);
-		    PUTSHORT(PPP_CHAP, nakp);
-		    PUTCHAR(ao->chap_mdtype, nakp);
-		    break;
-		}
-		ho->chap_mdtype = cichar; /* save md type */
-		ho->neg_chap = 1;
-		break;
-	    }
-
-	    /*
-	     * We don't recognize the protocol they're asking for.
-	     * Nak it with something we're willing to do.
-	     * (At this point we know ao->neg_upap || ao->neg_chap.)
-	     */
-	    orc = CONFNAK;
-	    PUTCHAR(CI_AUTHTYPE, nakp);
-	    if (ao->neg_chap) {
-		PUTCHAR(CILEN_CHAP, nakp);
-		PUTSHORT(PPP_CHAP, nakp);
-		PUTCHAR(ao->chap_mdtype, nakp);
-	    } else {
-		PUTCHAR(CILEN_SHORT, nakp);
-		PUTSHORT(PPP_PAP, nakp);
-	    }
-	    break;
-
-	case CI_QUALITY:
-	    if (!ao->neg_lqr ||
-		cilen != CILEN_LQR) {
-		orc = CONFREJ;
-		break;
-	    }
-
-	    GETSHORT(cishort, p);
-	    GETLONG(cilong, p);
-
-	    /*
-	     * Check the protocol and the reporting period.
-	     * XXX When should we Nak this, and what with?
-	     */
-	    if (cishort != PPP_LQR) {
-		orc = CONFNAK;
-		PUTCHAR(CI_QUALITY, nakp);
-		PUTCHAR(CILEN_LQR, nakp);
-		PUTSHORT(PPP_LQR, nakp);
-		PUTLONG(ao->lqr_period, nakp);
-		break;
-	    }
-	    break;
-
-	case CI_MAGICNUMBER:
-	    if (!(ao->neg_magicnumber || go->neg_magicnumber) ||
-		cilen != CILEN_LONG) {
-		orc = CONFREJ;
-		break;
-	    }
-	    GETLONG(cilong, p);
-
-	    /*
-	     * He must have a different magic number.
-	     */
-	    if (go->neg_magicnumber &&
-		cilong == go->magicnumber) {
-		cilong = magic();	/* Don't put magic() inside macro! */
-		orc = CONFNAK;
-		PUTCHAR(CI_MAGICNUMBER, nakp);
-		PUTCHAR(CILEN_LONG, nakp);
-		PUTLONG(cilong, nakp);
-		break;
-	    }
-	    ho->neg_magicnumber = 1;
-	    ho->magicnumber = cilong;
-	    break;
-
-
-	case CI_PCOMPRESSION:
-	    if (!ao->neg_pcompression ||
-		cilen != CILEN_VOID) {
-		orc = CONFREJ;
-		break;
-	    }
-	    ho->neg_pcompression = 1;
-	    break;
-
-	case CI_ACCOMPRESSION:
-	    if (!ao->neg_accompression ||
-		cilen != CILEN_VOID) {
-		orc = CONFREJ;
-		break;
-	    }
-	    ho->neg_accompression = 1;
-	    break;
-
-	case CI_MRRU:
-	    if (!ao->neg_mrru || !multilink ||
-		cilen != CILEN_SHORT) {
-		orc = CONFREJ;
-		break;
-	    }
-
-	    GETSHORT(cishort, p);
-	    /* possibly should insist on a minimum/maximum MRRU here */
-	    ho->neg_mrru = 1;
-	    ho->mrru = cishort;
-	    break;
-
-	case CI_SSNHF:
-	    if (!ao->neg_ssnhf || !multilink ||
-		cilen != CILEN_VOID) {
-		orc = CONFREJ;
-		break;
-	    }
-	    ho->neg_ssnhf = 1;
-	    break;
-
-	case CI_EPDISC:
-	    if (!ao->neg_endpoint ||
-		cilen < CILEN_CHAR ||
-		cilen > CILEN_CHAR + MAX_ENDP_LEN) {
-		orc = CONFREJ;
-		break;
-	    }
-	    GETCHAR(cichar, p);
-	    cilen -= CILEN_CHAR;
-	    ho->neg_endpoint = 1;
-	    ho->endpoint.class = cichar;
-	    ho->endpoint.length = cilen;
-	    BCOPY(p, ho->endpoint.value, cilen);
-	    INCPTR(cilen, p);
-	    break;
-
-	default:
-	    LCPDEBUG(("lcp_reqci: rcvd unknown option %d", citype));
-	    orc = CONFREJ;
-	    break;
-	}
-
-endswitch:
-	if (orc == CONFACK &&		/* Good CI */
-	    rc != CONFACK)		/*  but prior CI wasnt? */
-	    continue;			/* Don't send this one */
-
-	if (orc == CONFNAK) {		/* Nak this CI? */
-	    if (reject_if_disagree	/* Getting fed up with sending NAKs? */
-		&& citype != CI_MAGICNUMBER) {
-		orc = CONFREJ;		/* Get tough if so */
-	    } else {
-		if (rc == CONFREJ)	/* Rejecting prior CI? */
-		    continue;		/* Don't send this one */
-		rc = CONFNAK;
-	    }
-	}
-	if (orc == CONFREJ) {		/* Reject this CI */
-	    rc = CONFREJ;
-	    if (cip != rejp)		/* Need to move rejected CI? */
-		BCOPY(cip, rejp, cilen); /* Move it */
-	    INCPTR(cilen, rejp);	/* Update output pointer */
-	}
-    }
-
-    /*
-     * If we wanted to send additional NAKs (for unsent CIs), the
-     * code would go here.  The extra NAKs would go at *nakp.
-     * At present there are no cases where we want to ask the
-     * peer to negotiate an option.
-     */
-
-    switch (rc) {
-    case CONFACK:
-	*lenp = next - inp;
-	break;
-    case CONFNAK:
-	/*
-	 * Copy the Nak'd options from the nak_buffer to the caller's buffer.
-	 */
-	*lenp = nakp - nak_buffer;
-	BCOPY(nak_buffer, inp, *lenp);
-	break;
-    case CONFREJ:
-	*lenp = rejp - inp;
-	break;
-    }
-
-    LCPDEBUG(("lcp_reqci: returning CONF%s.", CODENAME(rc)));
-    return (rc);			/* Return final code */
-}
-
-
-/*
- * lcp_up - LCP has come UP.
- */
-static void
-lcp_up(f)
-    fsm *f;
-{
-    lcp_options *wo = &lcp_wantoptions[f->unit];
-    lcp_options *ho = &lcp_hisoptions[f->unit];
-    lcp_options *go = &lcp_gotoptions[f->unit];
-    lcp_options *ao = &lcp_allowoptions[f->unit];
-    int mtu;
-
-    if (!go->neg_magicnumber)
-	go->magicnumber = 0;
-    if (!ho->neg_magicnumber)
-	ho->magicnumber = 0;
-
-    /*
-     * Set our MTU to the smaller of the MTU we wanted and
-     * the MRU our peer wanted.  If we negotiated an MRU,
-     * set our MRU to the larger of value we wanted and
-     * the value we got in the negotiation.
-     * Note on the MTU: the link MTU can be the MRU the peer wanted,
-     * the interface MTU is set to the lower of that and the
-     * MTU we want to use.
-     */
-    mtu = ho->neg_mru? ho->mru: PPP_MRU;
-#ifdef HAVE_MULTILINK
-    if (!(multilink && go->neg_mrru && ho->neg_mrru))
-#endif /* HAVE_MULTILINK */
-	netif_set_mtu(f->unit, MIN(mtu, ao->mru));
-    ppp_send_config(f->unit, mtu,
-		    (ho->neg_asyncmap? ho->asyncmap: 0xffffffff),
-		    ho->neg_pcompression, ho->neg_accompression);
-    ppp_recv_config(f->unit, (go->neg_mru? MAX(wo->mru, go->mru): PPP_MRU),
-		    (lax_recv? 0: go->neg_asyncmap? go->asyncmap: 0xffffffff),
-		    go->neg_pcompression, go->neg_accompression);
-
-    if (ho->neg_mru)
-	peer_mru[f->unit] = ho->mru;
-
-    lcp_echo_lowerup(f->unit);  /* Enable echo messages */
-
-    link_established(f->unit);
-}
-
-
-/*
- * lcp_down - LCP has gone DOWN.
- *
- * Alert other protocols.
- */
-static void
-lcp_down(f)
-    fsm *f;
-{
-    lcp_options *go = &lcp_gotoptions[f->unit];
-
-    lcp_echo_lowerdown(f->unit);
-
-    link_down(f->unit);
-
-    ppp_send_config(f->unit, PPP_MRU, 0xffffffff, 0, 0);
-    ppp_recv_config(f->unit, PPP_MRU,
-		    (go->neg_asyncmap? go->asyncmap: 0xffffffff),
-		    go->neg_pcompression, go->neg_accompression);
-    peer_mru[f->unit] = PPP_MRU;
-}
-
-
-/*
- * lcp_starting - LCP needs the lower layer up.
- */
-static void
-lcp_starting(f)
-    fsm *f;
-{
-    link_required(f->unit);
-}
-
-
-/*
- * lcp_finished - LCP has finished with the lower layer.
- */
-static void
-lcp_finished(f)
-    fsm *f;
-{
-    link_terminated(f->unit);
-}
-
-
-/*
- * lcp_printpkt - print the contents of an LCP packet.
- */
-static char *lcp_codenames[] = {
-    "ConfReq", "ConfAck", "ConfNak", "ConfRej",
-    "TermReq", "TermAck", "CodeRej", "ProtRej",
-    "EchoReq", "EchoRep", "DiscReq"
-};
-
-static int
-lcp_printpkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int code, id, len, olen, i;
-    u_char *pstart, *optend;
-    u_short cishort;
-    u_int32_t cilong;
-
-    if (plen < HEADERLEN)
-	return 0;
-    pstart = p;
-    GETCHAR(code, p);
-    GETCHAR(id, p);
-    GETSHORT(len, p);
-    if (len < HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(lcp_codenames) / sizeof(char *))
-	printer(arg, " %s", lcp_codenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code);
-    printer(arg, " id=0x%x", id);
-    len -= HEADERLEN;
-    switch (code) {
-    case CONFREQ:
-    case CONFACK:
-    case CONFNAK:
-    case CONFREJ:
-	/* print option list */
-	while (len >= 2) {
-	    GETCHAR(code, p);
-	    GETCHAR(olen, p);
-	    p -= 2;
-	    if (olen < 2 || olen > len) {
-		break;
-	    }
-	    printer(arg, " <");
-	    len -= olen;
-	    optend = p + olen;
-	    switch (code) {
-	    case CI_MRU:
-		if (olen == CILEN_SHORT) {
-		    p += 2;
-		    GETSHORT(cishort, p);
-		    printer(arg, "mru %d", cishort);
-		}
-		break;
-	    case CI_ASYNCMAP:
-		if (olen == CILEN_LONG) {
-		    p += 2;
-		    GETLONG(cilong, p);
-		    printer(arg, "asyncmap 0x%x", cilong);
-		}
-		break;
-	    case CI_AUTHTYPE:
-		if (olen >= CILEN_SHORT) {
-		    p += 2;
-		    printer(arg, "auth ");
-		    GETSHORT(cishort, p);
-		    switch (cishort) {
-		    case PPP_PAP:
-			printer(arg, "pap");
-			break;
-		    case PPP_CHAP:
-			printer(arg, "chap");
-			if (p < optend) {
-			    switch (*p) {
-			    case CHAP_DIGEST_MD5:
-				printer(arg, " MD5");
-				++p;
-				break;
-#ifdef CHAPMS
-			    case CHAP_MICROSOFT:
-				printer(arg, " m$oft");
-				++p;
-				break;
-#endif
-			    }
-			}
-			break;
-		    default:
-			printer(arg, "0x%x", cishort);
-		    }
-		}
-		break;
-	    case CI_QUALITY:
-		if (olen >= CILEN_SHORT) {
-		    p += 2;
-		    printer(arg, "quality ");
-		    GETSHORT(cishort, p);
-		    switch (cishort) {
-		    case PPP_LQR:
-			printer(arg, "lqr");
-			break;
-		    default:
-			printer(arg, "0x%x", cishort);
-		    }
-		}
-		break;
-	    case CI_CALLBACK:
-		if (olen >= CILEN_CHAR) {
-		    p += 2;
-		    printer(arg, "callback ");
-		    GETCHAR(cishort, p);
-		    switch (cishort) {
-		    case CBCP_OPT:
-			printer(arg, "CBCP");
-			break;
-		    default:
-			printer(arg, "0x%x", cishort);
-		    }
-		}
-		break;
-	    case CI_MAGICNUMBER:
-		if (olen == CILEN_LONG) {
-		    p += 2;
-		    GETLONG(cilong, p);
-		    printer(arg, "magic 0x%x", cilong);
-		}
-		break;
-	    case CI_PCOMPRESSION:
-		if (olen == CILEN_VOID) {
-		    p += 2;
-		    printer(arg, "pcomp");
-		}
-		break;
-	    case CI_ACCOMPRESSION:
-		if (olen == CILEN_VOID) {
-		    p += 2;
-		    printer(arg, "accomp");
-		}
-		break;
-	    case CI_MRRU:
-		if (olen == CILEN_SHORT) {
-		    p += 2;
-		    GETSHORT(cishort, p);
-		    printer(arg, "mrru %d", cishort);
-		}
-		break;
-	    case CI_SSNHF:
-		if (olen == CILEN_VOID) {
-		    p += 2;
-		    printer(arg, "ssnhf");
-		}
-		break;
-	    case CI_EPDISC:
-#ifdef HAVE_MULTILINK
-		if (olen >= CILEN_CHAR) {
-		    struct epdisc epd;
-		    p += 2;
-		    GETCHAR(epd.class, p);
-		    epd.length = olen - CILEN_CHAR;
-		    if (epd.length > MAX_ENDP_LEN)
-			epd.length = MAX_ENDP_LEN;
-		    if (epd.length > 0) {
-			BCOPY(p, epd.value, epd.length);
-			p += epd.length;
-		    }
-		    printer(arg, "endpoint [%s]", epdisc_to_str(&epd));
-		}
-#else
-		printer(arg, "endpoint");
-#endif
-		break;
-	    }
-	    while (p < optend) {
-		GETCHAR(code, p);
-		printer(arg, " %.2x", code);
-	    }
-	    printer(arg, ">");
-	}
-	break;
-
-    case TERMACK:
-    case TERMREQ:
-	if (len > 0 && *p >= ' ' && *p < 0x7f) {
-	    printer(arg, " ");
-	    print_string((char *)p, len, printer, arg);
-	    p += len;
-	    len = 0;
-	}
-	break;
-
-    case ECHOREQ:
-    case ECHOREP:
-    case DISCREQ:
-	if (len >= 4) {
-	    GETLONG(cilong, p);
-	    printer(arg, " magic=0x%x", cilong);
-	    p += 4;
-	    len -= 4;
-	}
-	break;
-    }
-
-    /* print the rest of the bytes in the packet */
-    for (i = 0; i < len && i < 32; ++i) {
-	GETCHAR(code, p);
-	printer(arg, " %.2x", code);
-    }
-    if (i < len) {
-	printer(arg, " ...");
-	p += len - i;
-    }
-
-    return p - pstart;
-}
-
-/*
- * Time to shut down the link because there is nothing out there.
- */
-
-static
-void LcpLinkFailure (f)
-    fsm *f;
-{
-    if (f->state == OPENED) {
-	info("No response to %d echo-requests", lcp_echos_pending);
-        notice("Serial link appears to be disconnected.");
-        lcp_close(f->unit, "Peer not responding");
-	status = EXIT_PEER_DEAD;
-    }
-}
-
-/*
- * Timer expired for the LCP echo requests from this process.
- */
-
-static void
-LcpEchoCheck (f)
-    fsm *f;
-{
-    LcpSendEchoRequest (f);
-    if (f->state != OPENED)
-	return;
-
-    /*
-     * Start the timer for the next interval.
-     */
-    if (lcp_echo_timer_running)
-	warn("assertion lcp_echo_timer_running==0 failed");
-    TIMEOUT (LcpEchoTimeout, f, lcp_echo_interval);
-    lcp_echo_timer_running = 1;
-}
-
-/*
- * LcpEchoTimeout - Timer expired on the LCP echo
- */
-
-static void
-LcpEchoTimeout (arg)
-    void *arg;
-{
-    if (lcp_echo_timer_running != 0) {
-        lcp_echo_timer_running = 0;
-        LcpEchoCheck ((fsm *) arg);
-    }
-}
-
-/*
- * LcpEchoReply - LCP has received a reply to the echo
- */
-
-static void
-lcp_received_echo_reply (f, id, inp, len)
-    fsm *f;
-    int id;
-    u_char *inp;
-    int len;
-{
-    u_int32_t magic;
-
-    /* Check the magic number - don't count replies from ourselves. */
-    if (len < 4) {
-	dbglog("lcp: received short Echo-Reply, length %d", len);
-	return;
-    }
-    GETLONG(magic, inp);
-    if (lcp_gotoptions[f->unit].neg_magicnumber
-	&& magic == lcp_gotoptions[f->unit].magicnumber) {
-	warn("appear to have received our own echo-reply!");
-	return;
-    }
-
-    /* Reset the number of outstanding echo frames */
-    lcp_echos_pending = 0;
-}
-
-/*
- * LcpSendEchoRequest - Send an echo request frame to the peer
- */
-
-static void
-LcpSendEchoRequest (f)
-    fsm *f;
-{
-    u_int32_t lcp_magic;
-    u_char pkt[4], *pktp;
-
-    /*
-     * Detect the failure of the peer at this point.
-     */
-    if (lcp_echo_fails != 0) {
-        if (lcp_echos_pending >= lcp_echo_fails) {
-            LcpLinkFailure(f);
-	    lcp_echos_pending = 0;
-	}
-    }
-
-    /*
-     * Make and send the echo request frame.
-     */
-    if (f->state == OPENED) {
-        lcp_magic = lcp_gotoptions[f->unit].magicnumber;
-	pktp = pkt;
-	PUTLONG(lcp_magic, pktp);
-        fsm_sdata(f, ECHOREQ, lcp_echo_number++ & 0xFF, pkt, pktp - pkt);
-	++lcp_echos_pending;
-    }
-}
-
-/*
- * lcp_echo_lowerup - Start the timer for the LCP frame
- */
-
-static void
-lcp_echo_lowerup (unit)
-    int unit;
-{
-    fsm *f = &lcp_fsm[unit];
-
-    /* Clear the parameters for generating echo frames */
-    lcp_echos_pending      = 0;
-    lcp_echo_number        = 0;
-    lcp_echo_timer_running = 0;
-  
-    /* If a timeout interval is specified then start the timer */
-    if (lcp_echo_interval != 0)
-        LcpEchoCheck (f);
-}
-
-/*
- * lcp_echo_lowerdown - Stop the timer for the LCP frame
- */
-
-static void
-lcp_echo_lowerdown (unit)
-    int unit;
-{
-    fsm *f = &lcp_fsm[unit];
-
-    if (lcp_echo_timer_running != 0) {
-        UNTIMEOUT (LcpEchoTimeout, f);
-        lcp_echo_timer_running = 0;
-    }
-}
diff --git a/mdk-stage1/ppp/pppd/lcp.h b/mdk-stage1/ppp/pppd/lcp.h
deleted file mode 100644
index b87a9295e..000000000
--- a/mdk-stage1/ppp/pppd/lcp.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * lcp.h - Link Control Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Options.
- */
-#define CI_MRU		1	/* Maximum Receive Unit */
-#define CI_ASYNCMAP	2	/* Async Control Character Map */
-#define CI_AUTHTYPE	3	/* Authentication Type */
-#define CI_QUALITY	4	/* Quality Protocol */
-#define CI_MAGICNUMBER	5	/* Magic Number */
-#define CI_PCOMPRESSION	7	/* Protocol Field Compression */
-#define CI_ACCOMPRESSION 8	/* Address/Control Field Compression */
-#define CI_CALLBACK	13	/* callback */
-#define CI_MRRU		17	/* max reconstructed receive unit; multilink */
-#define CI_SSNHF	18	/* short sequence numbers for multilink */
-#define CI_EPDISC	19	/* endpoint discriminator */
-
-/*
- * LCP-specific packet types.
- */
-#define PROTREJ		8	/* Protocol Reject */
-#define ECHOREQ		9	/* Echo Request */
-#define ECHOREP		10	/* Echo Reply */
-#define DISCREQ		11	/* Discard Request */
-#define CBCP_OPT	6	/* Use callback control protocol */
-
-/*
- * The state of options is described by an lcp_options structure.
- */
-typedef struct lcp_options {
-    bool passive;		/* Don't die if we don't get a response */
-    bool silent;		/* Wait for the other end to start first */
-    bool restart;		/* Restart vs. exit after close */
-    bool neg_mru;		/* Negotiate the MRU? */
-    bool neg_asyncmap;		/* Negotiate the async map? */
-    bool neg_upap;		/* Ask for UPAP authentication? */
-    bool neg_chap;		/* Ask for CHAP authentication? */
-    bool neg_magicnumber;	/* Ask for magic number? */
-    bool neg_pcompression;	/* HDLC Protocol Field Compression? */
-    bool neg_accompression;	/* HDLC Address/Control Field Compression? */
-    bool neg_lqr;		/* Negotiate use of Link Quality Reports */
-    bool neg_cbcp;		/* Negotiate use of CBCP */
-    bool neg_mrru;		/* negotiate multilink MRRU */
-    bool neg_ssnhf;		/* negotiate short sequence numbers */
-    bool neg_endpoint;		/* negotiate endpoint discriminator */
-    int  mru;			/* Value of MRU */
-    int	 mrru;			/* Value of MRRU, and multilink enable */
-    u_char chap_mdtype;		/* which MD type (hashing algorithm) */
-    u_int32_t asyncmap;		/* Value of async map */
-    u_int32_t magicnumber;
-    int  numloops;		/* Number of loops during magic number neg. */
-    u_int32_t lqr_period;	/* Reporting period for LQR 1/100ths second */
-    struct epdisc endpoint;	/* endpoint discriminator */
-} lcp_options;
-
-extern fsm lcp_fsm[];
-extern lcp_options lcp_wantoptions[];
-extern lcp_options lcp_gotoptions[];
-extern lcp_options lcp_allowoptions[];
-extern lcp_options lcp_hisoptions[];
-
-#define DEFMRU	1500		/* Try for this */
-#define MINMRU	128		/* No MRUs below this */
-#define MAXMRU	16384		/* Normally limit MRU to this */
-
-void lcp_open __P((int));
-void lcp_close __P((int, char *));
-void lcp_lowerup __P((int));
-void lcp_lowerdown __P((int));
-void lcp_sprotrej __P((int, u_char *, int));	/* send protocol reject */
-
-extern struct protent lcp_protent;
-
-/* Default number of times we receive our magic number from the peer
-   before deciding the link is looped-back. */
-#define DEFLOOPBACKFAIL	10
diff --git a/mdk-stage1/ppp/pppd/magic.c b/mdk-stage1/ppp/pppd/magic.c
deleted file mode 100644
index 1682dee03..000000000
--- a/mdk-stage1/ppp/pppd/magic.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * magic.c - PPP Magic Number routines.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/time.h>
-
-#include "pppd.h"
-#include "magic.h"
-
-static const char rcsid[] = RCSID;
-
-extern long mrand48 __P((void));
-extern void srand48 __P((long));
-
-/*
- * magic_init - Initialize the magic number generator.
- *
- * Attempts to compute a random number seed which will not repeat.
- * The current method uses the current hostid, current process ID
- * and current time, currently.
- */
-void
-magic_init()
-{
-    long seed;
-    struct timeval t;
-
-    gettimeofday(&t, NULL);
-    seed = get_host_seed() ^ t.tv_sec ^ t.tv_usec ^ getpid();
-    srand48(seed);
-}
-
-/*
- * magic - Returns the next magic number.
- */
-u_int32_t
-magic()
-{
-    return (u_int32_t) mrand48();
-}
-
-#ifdef NO_DRAND48
-/*
- * Substitute procedures for those systems which don't have
- * drand48 et al.
- */
-
-double
-drand48()
-{
-    return (double)random() / (double)0x7fffffffL; /* 2**31-1 */
-}
-
-long
-mrand48()
-{
-    return random();
-}
-
-void
-srand48(seedval)
-long seedval;
-{
-    srandom((int)seedval);
-}
-
-#endif
diff --git a/mdk-stage1/ppp/pppd/magic.h b/mdk-stage1/ppp/pppd/magic.h
deleted file mode 100644
index 1344626a3..000000000
--- a/mdk-stage1/ppp/pppd/magic.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * magic.h - PPP Magic Number definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-void magic_init __P((void));	/* Initialize the magic number generator */
-u_int32_t magic __P((void));	/* Returns the next magic number */
diff --git a/mdk-stage1/ppp/pppd/main.c b/mdk-stage1/ppp/pppd/main.c
deleted file mode 100644
index c074938cd..000000000
--- a/mdk-stage1/ppp/pppd/main.c
+++ /dev/null
@@ -1,1846 +0,0 @@
-/*
- * main.c - Point-to-Point Protocol main module
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdio.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <signal.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <syslog.h>
-#include <netdb.h>
-#include <utmp.h>
-#include <pwd.h>
-#include <setjmp.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include "pppd.h"
-#include "magic.h"
-#include "fsm.h"
-#include "lcp.h"
-#include "ipcp.h"
-#ifdef INET6
-#include "ipv6cp.h"
-#endif
-#include "upap.h"
-#include "chap.h"
-#include "ccp.h"
-#include "pathnames.h"
-#include "tdb.h"
-
-#ifdef CBCP_SUPPORT
-#include "cbcp.h"
-#endif
-
-#ifdef IPX_CHANGE
-#include "ipxcp.h"
-#endif /* IPX_CHANGE */
-#ifdef AT_CHANGE
-#include "atcp.h"
-#endif
-
-static const char rcsid[] = RCSID;
-
-/* interface vars */
-char ifname[32];		/* Interface name */
-int ifunit;			/* Interface unit number */
-
-struct channel *the_channel;
-
-char *progname;			/* Name of this program */
-char hostname[MAXNAMELEN];	/* Our hostname */
-static char pidfilename[MAXPATHLEN];	/* name of pid file */
-static char linkpidfile[MAXPATHLEN];	/* name of linkname pid file */
-char ppp_devnam[MAXPATHLEN];	/* name of PPP tty (maybe ttypx) */
-uid_t uid;			/* Our real user-id */
-struct notifier *pidchange = NULL;
-struct notifier *phasechange = NULL;
-struct notifier *exitnotify = NULL;
-struct notifier *sigreceived = NULL;
-
-int hungup;			/* terminal has been hung up */
-int privileged;			/* we're running as real uid root */
-int need_holdoff;		/* need holdoff period before restarting */
-int detached;			/* have detached from terminal */
-volatile int status;		/* exit status for pppd */
-int unsuccess;			/* # unsuccessful connection attempts */
-int do_callback;		/* != 0 if we should do callback next */
-int doing_callback;		/* != 0 if we are doing callback */
-TDB_CONTEXT *pppdb;		/* database for storing status etc. */
-char db_key[32];
-
-int (*holdoff_hook) __P((void)) = NULL;
-int (*new_phase_hook) __P((int)) = NULL;
-
-static int conn_running;	/* we have a [dis]connector running */
-static int devfd;		/* fd of underlying device */
-static int fd_ppp = -1;		/* fd for talking PPP */
-static int fd_loop;		/* fd for getting demand-dial packets */
-
-int phase;			/* where the link is at */
-int kill_link;
-int open_ccp_flag;
-int listen_time;
-int got_sigusr2;
-int got_sigterm;
-int got_sighup;
-
-static int waiting;
-static sigjmp_buf sigjmp;
-
-char **script_env;		/* Env. variable values for scripts */
-int s_env_nalloc;		/* # words avail at script_env */
-
-u_char outpacket_buf[PPP_MRU+PPP_HDRLEN]; /* buffer for outgoing packet */
-u_char inpacket_buf[PPP_MRU+PPP_HDRLEN]; /* buffer for incoming packet */
-
-static int n_children;		/* # child processes still running */
-static int got_sigchld;		/* set if we have received a SIGCHLD */
-
-int privopen;			/* don't lock, open device as root */
-
-char *no_ppp_msg = "Sorry - this system lacks PPP kernel support\n";
-
-GIDSET_TYPE groups[NGROUPS_MAX];/* groups the user is in */
-int ngroups;			/* How many groups valid in groups */
-
-static struct timeval start_time;	/* Time when link was started. */
-
-struct pppd_stats link_stats;
-int link_connect_time;
-int link_stats_valid;
-
-/*
- * We maintain a list of child process pids and
- * functions to call when they exit.
- */
-struct subprocess {
-    pid_t	pid;
-    char	*prog;
-    void	(*done) __P((void *));
-    void	*arg;
-    struct subprocess *next;
-};
-
-static struct subprocess *children;
-
-/* Prototypes for procedures local to this file. */
-
-static void setup_signals __P((void));
-static void create_pidfile __P((void));
-static void create_linkpidfile __P((void));
-static void cleanup __P((void));
-static void get_input __P((void));
-static void calltimeout __P((void));
-static struct timeval *timeleft __P((struct timeval *));
-static void kill_my_pg __P((int));
-static void hup __P((int));
-static void term __P((int));
-static void chld __P((int));
-static void toggle_debug __P((int));
-static void open_ccp __P((int));
-static void bad_signal __P((int));
-static void holdoff_end __P((void *));
-static int reap_kids __P((int waitfor));
-static void update_db_entry __P((void));
-static void add_db_key __P((const char *));
-static void delete_db_key __P((const char *));
-static void cleanup_db __P((void));
-static void handle_events __P((void));
-
-extern	char	*ttyname __P((int));
-extern	char	*getlogin __P((void));
-int main __P((int, char *[]));
-
-#ifdef ultrix
-#undef	O_NONBLOCK
-#define	O_NONBLOCK	O_NDELAY
-#endif
-
-#ifdef ULTRIX
-#define setlogmask(x)
-#endif
-
-/*
- * PPP Data Link Layer "protocol" table.
- * One entry per supported protocol.
- * The last entry must be NULL.
- */
-struct protent *protocols[] = {
-    &lcp_protent,
-    &pap_protent,
-    &chap_protent,
-#ifdef CBCP_SUPPORT
-    &cbcp_protent,
-#endif
-    &ipcp_protent,
-#ifdef INET6
-    &ipv6cp_protent,
-#endif
-    &ccp_protent,
-#ifdef IPX_CHANGE
-    &ipxcp_protent,
-#endif
-#ifdef AT_CHANGE
-    &atcp_protent,
-#endif
-    NULL
-};
-
-/*
- * If PPP_DRV_NAME is not defined, use the default "ppp" as the device name.
- */
-#if !defined(PPP_DRV_NAME)
-#define PPP_DRV_NAME	"ppp"
-#endif /* !defined(PPP_DRV_NAME) */
-
-int
-main(argc, argv)
-    int argc;
-    char *argv[];
-{
-    int i, t;
-    char *p;
-    struct passwd *pw;
-    struct protent *protp;
-    char numbuf[16];
-
-    new_phase(PHASE_INITIALIZE);
-
-    /*
-     * Ensure that fds 0, 1, 2 are open, to /dev/null if nowhere else.
-     * This way we can close 0, 1, 2 in detach() without clobbering
-     * a fd that we are using.
-     */
-    if ((i = open("/dev/null", O_RDWR)) >= 0) {
-	while (0 <= i && i <= 2)
-	    i = dup(i);
-	if (i >= 0)
-	    close(i);
-    }
-
-    script_env = NULL;
-
-    /* Initialize syslog facilities */
-    reopen_log();
-
-    if (gethostname(hostname, MAXNAMELEN) < 0 ) {
-	option_error("Couldn't get hostname: %m");
-	exit(1);
-    }
-    hostname[MAXNAMELEN-1] = 0;
-
-    /* make sure we don't create world or group writable files. */
-    umask(umask(0777) | 022);
-
-    uid = getuid();
-    privileged = uid == 0;
-    slprintf(numbuf, sizeof(numbuf), "%d", uid);
-    script_setenv("ORIG_UID", numbuf, 0);
-
-    ngroups = getgroups(NGROUPS_MAX, groups);
-
-    /*
-     * Initialize magic number generator now so that protocols may
-     * use magic numbers in initialization.
-     */
-    magic_init();
-
-    /*
-     * Initialize each protocol.
-     */
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-        (*protp->init)(0);
-
-    /*
-     * Initialize the default channel.
-     */
-    tty_init();
-
-    progname = *argv;
-
-    /*
-     * Parse, in order, the system options file, the user's options file,
-     * and the command line arguments.
-     */
-    if (!options_from_file(_PATH_SYSOPTIONS, !privileged, 0, 1)
-	|| !options_from_user()
-	|| !parse_args(argc-1, argv+1))
-	exit(EXIT_OPTION_ERROR);
-    devnam_fixed = 1;		/* can no longer change device name */
-
-    /*
-     * Work out the device name, if it hasn't already been specified,
-     * and parse the tty's options file.
-     */
-    if (the_channel->process_extra_options)
-	(*the_channel->process_extra_options)();
-
-    if (debug)
-	setlogmask(LOG_UPTO(LOG_DEBUG));
-
-    /*
-     * Check that we are running as root.
-     */
-    if (geteuid() != 0) {
-	option_error("must be root to run %s, since it is not setuid-root",
-		     argv[0]);
-	exit(EXIT_NOT_ROOT);
-    }
-
-    if (!ppp_available()) {
-	option_error("%s", no_ppp_msg);
-	exit(EXIT_NO_KERNEL_SUPPORT);
-    }
-
-    /*
-     * Check that the options given are valid and consistent.
-     */
-    check_options();
-    if (!sys_check_options())
-	exit(EXIT_OPTION_ERROR);
-    auth_check_options();
-#ifdef HAVE_MULTILINK
-    mp_check_options();
-#endif
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-	if (protp->check_options != NULL)
-	    (*protp->check_options)();
-    if (the_channel->check_options)
-	(*the_channel->check_options)();
-
-
-    if (dump_options || dryrun) {
-	init_pr_log(NULL, LOG_INFO);
-	print_options(pr_log, NULL);
-	end_pr_log();
-	if (dryrun)
-	    die(0);
-    }
-
-    /*
-     * Initialize system-dependent stuff.
-     */
-    sys_init();
-
-    pppdb = tdb_open(_PATH_PPPDB, 0, 0, O_RDWR|O_CREAT, 0644);
-    if (pppdb != NULL) {
-	slprintf(db_key, sizeof(db_key), "pppd%d", getpid());
-	update_db_entry();
-    } else {
-	warn("Warning: couldn't open ppp database %s", _PATH_PPPDB);
-	if (multilink) {
-	    warn("Warning: disabling multilink");
-	    multilink = 0;
-	}
-    }
-
-    /*
-     * Detach ourselves from the terminal, if required,
-     * and identify who is running us.
-     */
-    if (!nodetach && !updetach)
-	detach();
-    p = getlogin();
-    if (p == NULL) {
-	pw = getpwuid(uid);
-	if (pw != NULL && pw->pw_name != NULL)
-	    p = pw->pw_name;
-	else
-	    p = "(unknown)";
-    }
-    syslog(LOG_NOTICE, "pppd %s started by %s, uid %d", VERSION, p, uid);
-    script_setenv("PPPLOGNAME", p, 0);
-
-    if (devnam[0])
-	script_setenv("DEVICE", devnam, 1);
-    slprintf(numbuf, sizeof(numbuf), "%d", getpid());
-    script_setenv("PPPD_PID", numbuf, 1);
-
-    setup_signals();
-
-    waiting = 0;
-
-    create_linkpidfile();
-
-    /*
-     * If we're doing dial-on-demand, set up the interface now.
-     */
-    if (demand) {
-	/*
-	 * Open the loopback channel and set it up to be the ppp interface.
-	 */
-	tdb_writelock(pppdb);
-	fd_loop = open_ppp_loopback();
-	set_ifunit(1);
-	tdb_writeunlock(pppdb);
-
-	/*
-	 * Configure the interface and mark it up, etc.
-	 */
-	demand_conf();
-    }
-
-    do_callback = 0;
-    for (;;) {
-
-	listen_time = 0;
-	need_holdoff = 1;
-	devfd = -1;
-	status = EXIT_OK;
-	++unsuccess;
-	doing_callback = do_callback;
-	do_callback = 0;
-
-	if (demand && !doing_callback) {
-	    /*
-	     * Don't do anything until we see some activity.
-	     */
-	    new_phase(PHASE_DORMANT);
-	    demand_unblock();
-	    add_fd(fd_loop);
-	    for (;;) {
-		handle_events();
-		if (kill_link && !persist)
-		    break;
-		if (get_loop_output())
-		    break;
-	    }
-	    remove_fd(fd_loop);
-	    if (kill_link && !persist)
-		break;
-
-	    /*
-	     * Now we want to bring up the link.
-	     */
-	    demand_block();
-	    info("Starting link");
-	}
-
-	new_phase(PHASE_SERIALCONN);
-
-	devfd = the_channel->connect();
-	if (devfd < 0)
-	    goto fail;
-
-	/* set up the serial device as a ppp interface */
-	tdb_writelock(pppdb);
-	fd_ppp = the_channel->establish_ppp(devfd);
-	if (fd_ppp < 0) {
-	    tdb_writeunlock(pppdb);
-	    status = EXIT_FATAL_ERROR;
-	    goto disconnect;
-	}
-
-	if (!demand && ifunit >= 0)
-	    set_ifunit(1);
-	tdb_writeunlock(pppdb);
-
-	/*
-	 * Start opening the connection and wait for
-	 * incoming events (reply, timeout, etc.).
-	 */
-	notice("Connect: %s <--> %s", ifname, ppp_devnam);
-	gettimeofday(&start_time, NULL);
-	link_stats_valid = 0;
-	script_unsetenv("CONNECT_TIME");
-	script_unsetenv("BYTES_SENT");
-	script_unsetenv("BYTES_RCVD");
-	lcp_lowerup(0);
-
-	add_fd(fd_ppp);
-	lcp_open(0);		/* Start protocol */
-	status = EXIT_NEGOTIATION_FAILED;
-	new_phase(PHASE_ESTABLISH);
-	while (phase != PHASE_DEAD) {
-	    handle_events();
-	    get_input();
-	    if (kill_link)
-		lcp_close(0, "User request");
-	    if (open_ccp_flag) {
-		if (phase == PHASE_NETWORK || phase == PHASE_RUNNING) {
-		    ccp_fsm[0].flags = OPT_RESTART; /* clears OPT_SILENT */
-		    (*ccp_protent.open)(0);
-		}
-	    }
-	}
-
-	/*
-	 * Print connect time and statistics.
-	 */
-	if (link_stats_valid) {
-	    int t = (link_connect_time + 5) / 6;    /* 1/10ths of minutes */
-	    info("Connect time %d.%d minutes.", t/10, t%10);
-	    info("Sent %u bytes, received %u bytes.",
-		 link_stats.bytes_out, link_stats.bytes_in);
-	}
-
-	/*
-	 * Delete pid file before disestablishing ppp.  Otherwise it
-	 * can happen that another pppd gets the same unit and then
-	 * we delete its pid file.
-	 */
-	if (!demand) {
-	    if (pidfilename[0] != 0
-		&& unlink(pidfilename) < 0 && errno != ENOENT) 
-		warn("unable to delete pid file %s: %m", pidfilename);
-	    pidfilename[0] = 0;
-	}
-
-	/*
-	 * If we may want to bring the link up again, transfer
-	 * the ppp unit back to the loopback.  Set the
-	 * real serial device back to its normal mode of operation.
-	 */
-	remove_fd(fd_ppp);
-	clean_check();
-	the_channel->disestablish_ppp(devfd);
-	fd_ppp = -1;
-	if (!hungup)
-	    lcp_lowerdown(0);
-	if (!demand)
-	    script_unsetenv("IFNAME");
-
-	/*
-	 * Run disconnector script, if requested.
-	 * XXX we may not be able to do this if the line has hung up!
-	 */
-    disconnect:
-	new_phase(PHASE_DISCONNECT);
-	the_channel->disconnect();
-
-    fail:
-	if (the_channel->cleanup)
-	    (*the_channel->cleanup)();
-
-	if (!demand) {
-	    if (pidfilename[0] != 0
-		&& unlink(pidfilename) < 0 && errno != ENOENT) 
-		warn("unable to delete pid file %s: %m", pidfilename);
-	    pidfilename[0] = 0;
-	}
-
-	if (!persist || (maxfail > 0 && unsuccess >= maxfail))
-	    break;
-
-	if (demand)
-	    demand_discard();
-	t = need_holdoff? holdoff: 0;
-	if (holdoff_hook)
-	    t = (*holdoff_hook)();
-	if (t > 0) {
-	    new_phase(PHASE_HOLDOFF);
-	    TIMEOUT(holdoff_end, NULL, t);
-	    do {
-		handle_events();
-		if (kill_link)
-		    new_phase(PHASE_DORMANT); /* allow signal to end holdoff */
-	    } while (phase == PHASE_HOLDOFF);
-	    if (!persist)
-		break;
-	}
-    }
-
-    /* Wait for scripts to finish */
-    /* XXX should have a timeout here */
-    while (n_children > 0) {
-	if (debug) {
-	    struct subprocess *chp;
-	    dbglog("Waiting for %d child processes...", n_children);
-	    for (chp = children; chp != NULL; chp = chp->next)
-		dbglog("  script %s, pid %d", chp->prog, chp->pid);
-	}
-	if (reap_kids(1) < 0)
-	    break;
-    }
-
-    die(status);
-    return 0;
-}
-
-/*
- * handle_events - wait for something to happen and respond to it.
- */
-static void
-handle_events()
-{
-    struct timeval timo;
-    sigset_t mask;
-
-    kill_link = open_ccp_flag = 0;
-    if (sigsetjmp(sigjmp, 1) == 0) {
-	sigprocmask(SIG_BLOCK, &mask, NULL);
-	if (got_sighup || got_sigterm || got_sigusr2 || got_sigchld) {
-	    sigprocmask(SIG_UNBLOCK, &mask, NULL);
-	} else {
-	    waiting = 1;
-	    sigprocmask(SIG_UNBLOCK, &mask, NULL);
-	    wait_input(timeleft(&timo));
-	}
-    }
-    waiting = 0;
-    calltimeout();
-    if (got_sighup) {
-	kill_link = 1;
-	got_sighup = 0;
-	if (status != EXIT_HANGUP)
-	    status = EXIT_USER_REQUEST;
-    }
-    if (got_sigterm) {
-	kill_link = 1;
-	persist = 0;
-	status = EXIT_USER_REQUEST;
-	got_sigterm = 0;
-    }
-    if (got_sigchld) {
-	reap_kids(0);	/* Don't leave dead kids lying around */
-	got_sigchld = 0;
-    }
-    if (got_sigusr2) {
-	open_ccp_flag = 1;
-	got_sigusr2 = 0;
-    }
-}
-
-/*
- * setup_signals - initialize signal handling.
- */
-static void
-setup_signals()
-{
-    struct sigaction sa;
-    sigset_t mask;
-
-    /*
-     * Compute mask of all interesting signals and install signal handlers
-     * for each.  Only one signal handler may be active at a time.  Therefore,
-     * all other signals should be masked when any handler is executing.
-     */
-    sigemptyset(&mask);
-    sigaddset(&mask, SIGHUP);
-    sigaddset(&mask, SIGINT);
-    sigaddset(&mask, SIGTERM);
-    sigaddset(&mask, SIGCHLD);
-    sigaddset(&mask, SIGUSR2);
-
-#define SIGNAL(s, handler)	do { \
-	sa.sa_handler = handler; \
-	if (sigaction(s, &sa, NULL) < 0) \
-	    fatal("Couldn't establish signal handler (%d): %m", s); \
-    } while (0)
-
-    sa.sa_mask = mask;
-    sa.sa_flags = 0;
-    SIGNAL(SIGHUP, hup);		/* Hangup */
-    SIGNAL(SIGINT, term);		/* Interrupt */
-    SIGNAL(SIGTERM, term);		/* Terminate */
-    SIGNAL(SIGCHLD, chld);
-
-    SIGNAL(SIGUSR1, toggle_debug);	/* Toggle debug flag */
-    SIGNAL(SIGUSR2, open_ccp);		/* Reopen CCP */
-
-    /*
-     * Install a handler for other signals which would otherwise
-     * cause pppd to exit without cleaning up.
-     */
-    SIGNAL(SIGABRT, bad_signal);
-    SIGNAL(SIGALRM, bad_signal);
-    SIGNAL(SIGFPE, bad_signal);
-    SIGNAL(SIGILL, bad_signal);
-    SIGNAL(SIGPIPE, bad_signal);
-    SIGNAL(SIGQUIT, bad_signal);
-    SIGNAL(SIGSEGV, bad_signal);
-#ifdef SIGBUS
-    SIGNAL(SIGBUS, bad_signal);
-#endif
-#ifdef SIGEMT
-    SIGNAL(SIGEMT, bad_signal);
-#endif
-#ifdef SIGPOLL
-    SIGNAL(SIGPOLL, bad_signal);
-#endif
-#ifdef SIGPROF
-    SIGNAL(SIGPROF, bad_signal);
-#endif
-#ifdef SIGSYS
-    SIGNAL(SIGSYS, bad_signal);
-#endif
-#ifdef SIGTRAP
-    SIGNAL(SIGTRAP, bad_signal);
-#endif
-#ifdef SIGVTALRM
-    SIGNAL(SIGVTALRM, bad_signal);
-#endif
-#ifdef SIGXCPU
-    SIGNAL(SIGXCPU, bad_signal);
-#endif
-#ifdef SIGXFSZ
-    SIGNAL(SIGXFSZ, bad_signal);
-#endif
-
-    /*
-     * Apparently we can get a SIGPIPE when we call syslog, if
-     * syslogd has died and been restarted.  Ignoring it seems
-     * be sufficient.
-     */
-    signal(SIGPIPE, SIG_IGN);
-}
-
-/*
- * set_ifunit - do things we need to do once we know which ppp
- * unit we are using.
- */
-void
-set_ifunit(iskey)
-    int iskey;
-{
-    info("Using interface %s%d", PPP_DRV_NAME, ifunit);
-    slprintf(ifname, sizeof(ifname), "%s%d", PPP_DRV_NAME, ifunit);
-    script_setenv("IFNAME", ifname, iskey);
-    if (iskey) {
-	create_pidfile();	/* write pid to file */
-	create_linkpidfile();
-    }
-}
-
-/*
- * detach - detach us from the controlling terminal.
- */
-void
-detach()
-{
-    int pid;
-    char numbuf[16];
-
-    if (detached)
-	return;
-    if ((pid = fork()) < 0) {
-	error("Couldn't detach (fork failed: %m)");
-	die(1);			/* or just return? */
-    }
-    if (pid != 0) {
-	/* parent */
-	notify(pidchange, pid);
-	exit(0);		/* parent dies */
-    }
-    setsid();
-    chdir("/");
-    close(0);
-    close(1);
-    close(2);
-    detached = 1;
-    if (log_default)
-	log_to_fd = -1;
-    /* update pid files if they have been written already */
-    if (pidfilename[0])
-	create_pidfile();
-    if (linkpidfile[0])
-	create_linkpidfile();
-    slprintf(numbuf, sizeof(numbuf), "%d", getpid());
-    script_setenv("PPPD_PID", numbuf, 1);
-}
-
-/*
- * reopen_log - (re)open our connection to syslog.
- */
-void
-reopen_log()
-{
-#ifdef ULTRIX
-    openlog("pppd", LOG_PID);
-#else
-    openlog("pppd", LOG_PID | LOG_NDELAY, LOG_PPP);
-    setlogmask(LOG_UPTO(LOG_INFO));
-#endif
-}
-
-/*
- * Create a file containing our process ID.
- */
-static void
-create_pidfile()
-{
-    FILE *pidfile;
-
-    slprintf(pidfilename, sizeof(pidfilename), "%s%s.pid",
-	     _PATH_VARRUN, ifname);
-    if ((pidfile = fopen(pidfilename, "w")) != NULL) {
-	fprintf(pidfile, "%d\n", getpid());
-	(void) fclose(pidfile);
-    } else {
-	error("Failed to create pid file %s: %m", pidfilename);
-	pidfilename[0] = 0;
-    }
-}
-
-static void
-create_linkpidfile()
-{
-    FILE *pidfile;
-
-    if (linkname[0] == 0)
-	return;
-    script_setenv("LINKNAME", linkname, 1);
-    slprintf(linkpidfile, sizeof(linkpidfile), "%sppp-%s.pid",
-	     _PATH_VARRUN, linkname);
-    if ((pidfile = fopen(linkpidfile, "w")) != NULL) {
-	fprintf(pidfile, "%d\n", getpid());
-	if (ifname[0])
-	    fprintf(pidfile, "%s\n", ifname);
-	(void) fclose(pidfile);
-    } else {
-	error("Failed to create pid file %s: %m", linkpidfile);
-	linkpidfile[0] = 0;
-    }
-}
-
-/*
- * holdoff_end - called via a timeout when the holdoff period ends.
- */
-static void
-holdoff_end(arg)
-    void *arg;
-{
-    new_phase(PHASE_DORMANT);
-}
-
-/* List of protocol names, to make our messages a little more informative. */
-struct protocol_list {
-    u_short	proto;
-    const char	*name;
-} protocol_list[] = {
-    { 0x21,	"IP" },
-    { 0x23,	"OSI Network Layer" },
-    { 0x25,	"Xerox NS IDP" },
-    { 0x27,	"DECnet Phase IV" },
-    { 0x29,	"Appletalk" },
-    { 0x2b,	"Novell IPX" },
-    { 0x2d,	"VJ compressed TCP/IP" },
-    { 0x2f,	"VJ uncompressed TCP/IP" },
-    { 0x31,	"Bridging PDU" },
-    { 0x33,	"Stream Protocol ST-II" },
-    { 0x35,	"Banyan Vines" },
-    { 0x39,	"AppleTalk EDDP" },
-    { 0x3b,	"AppleTalk SmartBuffered" },
-    { 0x3d,	"Multi-Link" },
-    { 0x3f,	"NETBIOS Framing" },
-    { 0x41,	"Cisco Systems" },
-    { 0x43,	"Ascom Timeplex" },
-    { 0x45,	"Fujitsu Link Backup and Load Balancing (LBLB)" },
-    { 0x47,	"DCA Remote Lan" },
-    { 0x49,	"Serial Data Transport Protocol (PPP-SDTP)" },
-    { 0x4b,	"SNA over 802.2" },
-    { 0x4d,	"SNA" },
-    { 0x4f,	"IP6 Header Compression" },
-    { 0x6f,	"Stampede Bridging" },
-    { 0xfb,	"single-link compression" },
-    { 0xfd,	"1st choice compression" },
-    { 0x0201,	"802.1d Hello Packets" },
-    { 0x0203,	"IBM Source Routing BPDU" },
-    { 0x0205,	"DEC LANBridge100 Spanning Tree" },
-    { 0x0231,	"Luxcom" },
-    { 0x0233,	"Sigma Network Systems" },
-    { 0x8021,	"Internet Protocol Control Protocol" },
-    { 0x8023,	"OSI Network Layer Control Protocol" },
-    { 0x8025,	"Xerox NS IDP Control Protocol" },
-    { 0x8027,	"DECnet Phase IV Control Protocol" },
-    { 0x8029,	"Appletalk Control Protocol" },
-    { 0x802b,	"Novell IPX Control Protocol" },
-    { 0x8031,	"Bridging NCP" },
-    { 0x8033,	"Stream Protocol Control Protocol" },
-    { 0x8035,	"Banyan Vines Control Protocol" },
-    { 0x803d,	"Multi-Link Control Protocol" },
-    { 0x803f,	"NETBIOS Framing Control Protocol" },
-    { 0x8041,	"Cisco Systems Control Protocol" },
-    { 0x8043,	"Ascom Timeplex" },
-    { 0x8045,	"Fujitsu LBLB Control Protocol" },
-    { 0x8047,	"DCA Remote Lan Network Control Protocol (RLNCP)" },
-    { 0x8049,	"Serial Data Control Protocol (PPP-SDCP)" },
-    { 0x804b,	"SNA over 802.2 Control Protocol" },
-    { 0x804d,	"SNA Control Protocol" },
-    { 0x804f,	"IP6 Header Compression Control Protocol" },
-    { 0x006f,	"Stampede Bridging Control Protocol" },
-    { 0x80fb,	"Single Link Compression Control Protocol" },
-    { 0x80fd,	"Compression Control Protocol" },
-    { 0xc021,	"Link Control Protocol" },
-    { 0xc023,	"Password Authentication Protocol" },
-    { 0xc025,	"Link Quality Report" },
-    { 0xc027,	"Shiva Password Authentication Protocol" },
-    { 0xc029,	"CallBack Control Protocol (CBCP)" },
-    { 0xc081,	"Container Control Protocol" },
-    { 0xc223,	"Challenge Handshake Authentication Protocol" },
-    { 0xc281,	"Proprietary Authentication Protocol" },
-    { 0,	NULL },
-};
-
-/*
- * protocol_name - find a name for a PPP protocol.
- */
-const char *
-protocol_name(proto)
-    int proto;
-{
-    struct protocol_list *lp;
-
-    for (lp = protocol_list; lp->proto != 0; ++lp)
-	if (proto == lp->proto)
-	    return lp->name;
-    return NULL;
-}
-
-/*
- * get_input - called when incoming data is available.
- */
-static void
-get_input()
-{
-    int len, i;
-    u_char *p;
-    u_short protocol;
-    struct protent *protp;
-
-    p = inpacket_buf;	/* point to beginning of packet buffer */
-
-    len = read_packet(inpacket_buf);
-    if (len < 0)
-	return;
-
-    if (len == 0) {
-	notice("Modem hangup");
-	hungup = 1;
-	status = EXIT_HANGUP;
-	lcp_lowerdown(0);	/* serial link is no longer available */
-	link_terminated(0);
-	return;
-    }
-
-    if (debug /*&& (debugflags & DBG_INPACKET)*/)
-	dbglog("rcvd %P", p, len);
-
-    if (len < PPP_HDRLEN) {
-	MAINDEBUG(("io(): Received short packet."));
-	return;
-    }
-
-    p += 2;				/* Skip address and control */
-    GETSHORT(protocol, p);
-    len -= PPP_HDRLEN;
-
-    /*
-     * Toss all non-LCP packets unless LCP is OPEN.
-     */
-    if (protocol != PPP_LCP && lcp_fsm[0].state != OPENED) {
-	MAINDEBUG(("get_input: Received non-LCP packet when LCP not open."));
-	return;
-    }
-
-    /*
-     * Until we get past the authentication phase, toss all packets
-     * except LCP, LQR and authentication packets.
-     */
-    if (phase <= PHASE_AUTHENTICATE
-	&& !(protocol == PPP_LCP || protocol == PPP_LQR
-	     || protocol == PPP_PAP || protocol == PPP_CHAP)) {
-	MAINDEBUG(("get_input: discarding proto 0x%x in phase %d",
-		   protocol, phase));
-	return;
-    }
-
-    /*
-     * Upcall the proper protocol input routine.
-     */
-    for (i = 0; (protp = protocols[i]) != NULL; ++i) {
-	if (protp->protocol == protocol && protp->enabled_flag) {
-	    (*protp->input)(0, p, len);
-	    return;
-	}
-        if (protocol == (protp->protocol & ~0x8000) && protp->enabled_flag
-	    && protp->datainput != NULL) {
-	    (*protp->datainput)(0, p, len);
-	    return;
-	}
-    }
-
-    if (debug) {
-	const char *pname = protocol_name(protocol);
-	if (pname != NULL)
-	    warn("Unsupported protocol '%s' (0x%x) received", pname, protocol);
-	else
-	    warn("Unsupported protocol 0x%x received", protocol);
-    }
-    lcp_sprotrej(0, p - PPP_HDRLEN, len + PPP_HDRLEN);
-}
-
-/*
- * new_phase - signal the start of a new phase of pppd's operation.
- */
-void
-new_phase(p)
-    int p;
-{
-    phase = p;
-    if (new_phase_hook)
-	(*new_phase_hook)(p);
-    notify(phasechange, p);
-}
-
-/*
- * die - clean up state and exit with the specified status.
- */
-void
-die(status)
-    int status;
-{
-    cleanup();
-    notify(exitnotify, status);
-    syslog(LOG_INFO, "Exit.");
-    exit(status);
-}
-
-/*
- * cleanup - restore anything which needs to be restored before we exit
- */
-/* ARGSUSED */
-static void
-cleanup()
-{
-    sys_cleanup();
-
-    if (fd_ppp >= 0)
-	the_channel->disestablish_ppp(devfd);
-    if (the_channel->cleanup)
-	(*the_channel->cleanup)();
-
-    if (pidfilename[0] != 0 && unlink(pidfilename) < 0 && errno != ENOENT) 
-	warn("unable to delete pid file %s: %m", pidfilename);
-    pidfilename[0] = 0;
-    if (linkpidfile[0] != 0 && unlink(linkpidfile) < 0 && errno != ENOENT) 
-	warn("unable to delete pid file %s: %m", linkpidfile);
-    linkpidfile[0] = 0;
-
-    if (pppdb != NULL)
-	cleanup_db();
-}
-
-/*
- * update_link_stats - get stats at link termination.
- */
-void
-update_link_stats(u)
-    int u;
-{
-    struct timeval now;
-    char numbuf[32];
-
-    if (!get_ppp_stats(u, &link_stats)
-	|| gettimeofday(&now, NULL) < 0)
-	return;
-    link_connect_time = now.tv_sec - start_time.tv_sec;
-    link_stats_valid = 1;
-
-    slprintf(numbuf, sizeof(numbuf), "%d", link_connect_time);
-    script_setenv("CONNECT_TIME", numbuf, 0);
-    slprintf(numbuf, sizeof(numbuf), "%d", link_stats.bytes_out);
-    script_setenv("BYTES_SENT", numbuf, 0);
-    slprintf(numbuf, sizeof(numbuf), "%d", link_stats.bytes_in);
-    script_setenv("BYTES_RCVD", numbuf, 0);
-}
-
-
-struct	callout {
-    struct timeval	c_time;		/* time at which to call routine */
-    void		*c_arg;		/* argument to routine */
-    void		(*c_func) __P((void *)); /* routine */
-    struct		callout *c_next;
-};
-
-static struct callout *callout = NULL;	/* Callout list */
-static struct timeval timenow;		/* Current time */
-
-/*
- * timeout - Schedule a timeout.
- *
- * Note that this timeout takes the number of milliseconds, NOT hz (as in
- * the kernel).
- */
-void
-timeout(func, arg, secs, usecs)
-    void (*func) __P((void *));
-    void *arg;
-    int secs, usecs;
-{
-    struct callout *newp, *p, **pp;
-  
-    MAINDEBUG(("Timeout %p:%p in %d.%03d seconds.", func, arg,
-	       time / 1000, time % 1000));
-  
-    /*
-     * Allocate timeout.
-     */
-    if ((newp = (struct callout *) malloc(sizeof(struct callout))) == NULL)
-	fatal("Out of memory in timeout()!");
-    newp->c_arg = arg;
-    newp->c_func = func;
-    gettimeofday(&timenow, NULL);
-    newp->c_time.tv_sec = timenow.tv_sec + secs;
-    newp->c_time.tv_usec = timenow.tv_usec + usecs;
-    if (newp->c_time.tv_usec >= 1000000) {
-	newp->c_time.tv_sec += newp->c_time.tv_usec / 1000000;
-	newp->c_time.tv_usec %= 1000000;
-    }
-
-    /*
-     * Find correct place and link it in.
-     */
-    for (pp = &callout; (p = *pp); pp = &p->c_next)
-	if (newp->c_time.tv_sec < p->c_time.tv_sec
-	    || (newp->c_time.tv_sec == p->c_time.tv_sec
-		&& newp->c_time.tv_usec < p->c_time.tv_usec))
-	    break;
-    newp->c_next = p;
-    *pp = newp;
-}
-
-
-/*
- * untimeout - Unschedule a timeout.
- */
-void
-untimeout(func, arg)
-    void (*func) __P((void *));
-    void *arg;
-{
-    struct callout **copp, *freep;
-  
-    MAINDEBUG(("Untimeout %p:%p.", func, arg));
-  
-    /*
-     * Find first matching timeout and remove it from the list.
-     */
-    for (copp = &callout; (freep = *copp); copp = &freep->c_next)
-	if (freep->c_func == func && freep->c_arg == arg) {
-	    *copp = freep->c_next;
-	    free((char *) freep);
-	    break;
-	}
-}
-
-
-/*
- * calltimeout - Call any timeout routines which are now due.
- */
-static void
-calltimeout()
-{
-    struct callout *p;
-
-    while (callout != NULL) {
-	p = callout;
-
-	if (gettimeofday(&timenow, NULL) < 0)
-	    fatal("Failed to get time of day: %m");
-	if (!(p->c_time.tv_sec < timenow.tv_sec
-	      || (p->c_time.tv_sec == timenow.tv_sec
-		  && p->c_time.tv_usec <= timenow.tv_usec)))
-	    break;		/* no, it's not time yet */
-
-	callout = p->c_next;
-	(*p->c_func)(p->c_arg);
-
-	free((char *) p);
-    }
-}
-
-
-/*
- * timeleft - return the length of time until the next timeout is due.
- */
-static struct timeval *
-timeleft(tvp)
-    struct timeval *tvp;
-{
-    if (callout == NULL)
-	return NULL;
-
-    gettimeofday(&timenow, NULL);
-    tvp->tv_sec = callout->c_time.tv_sec - timenow.tv_sec;
-    tvp->tv_usec = callout->c_time.tv_usec - timenow.tv_usec;
-    if (tvp->tv_usec < 0) {
-	tvp->tv_usec += 1000000;
-	tvp->tv_sec -= 1;
-    }
-    if (tvp->tv_sec < 0)
-	tvp->tv_sec = tvp->tv_usec = 0;
-
-    return tvp;
-}
-
-
-/*
- * kill_my_pg - send a signal to our process group, and ignore it ourselves.
- */
-static void
-kill_my_pg(sig)
-    int sig;
-{
-    struct sigaction act, oldact;
-
-    act.sa_handler = SIG_IGN;
-    act.sa_flags = 0;
-    kill(0, sig);
-    sigaction(sig, &act, &oldact);
-    sigaction(sig, &oldact, NULL);
-}
-
-
-/*
- * hup - Catch SIGHUP signal.
- *
- * Indicates that the physical layer has been disconnected.
- * We don't rely on this indication; if the user has sent this
- * signal, we just take the link down.
- */
-static void
-hup(sig)
-    int sig;
-{
-    info("Hangup (SIGHUP)");
-    got_sighup = 1;
-    if (conn_running)
-	/* Send the signal to the [dis]connector process(es) also */
-	kill_my_pg(sig);
-    notify(sigreceived, sig);
-    if (waiting)
-	siglongjmp(sigjmp, 1);
-}
-
-
-/*
- * term - Catch SIGTERM signal and SIGINT signal (^C/del).
- *
- * Indicates that we should initiate a graceful disconnect and exit.
- */
-/*ARGSUSED*/
-static void
-term(sig)
-    int sig;
-{
-    info("Terminating on signal %d.", sig);
-    got_sigterm = 1;
-    if (conn_running)
-	/* Send the signal to the [dis]connector process(es) also */
-	kill_my_pg(sig);
-    notify(sigreceived, sig);
-    if (waiting)
-	siglongjmp(sigjmp, 1);
-}
-
-
-/*
- * chld - Catch SIGCHLD signal.
- * Sets a flag so we will call reap_kids in the mainline.
- */
-static void
-chld(sig)
-    int sig;
-{
-    got_sigchld = 1;
-    if (waiting)
-	siglongjmp(sigjmp, 1);
-}
-
-
-/*
- * toggle_debug - Catch SIGUSR1 signal.
- *
- * Toggle debug flag.
- */
-/*ARGSUSED*/
-static void
-toggle_debug(sig)
-    int sig;
-{
-    debug = !debug;
-    if (debug) {
-	setlogmask(LOG_UPTO(LOG_DEBUG));
-    } else {
-	setlogmask(LOG_UPTO(LOG_WARNING));
-    }
-}
-
-
-/*
- * open_ccp - Catch SIGUSR2 signal.
- *
- * Try to (re)negotiate compression.
- */
-/*ARGSUSED*/
-static void
-open_ccp(sig)
-    int sig;
-{
-    got_sigusr2 = 1;
-    if (waiting)
-	siglongjmp(sigjmp, 1);
-}
-
-
-/*
- * bad_signal - We've caught a fatal signal.  Clean up state and exit.
- */
-static void
-bad_signal(sig)
-    int sig;
-{
-    static int crashed = 0;
-
-    if (crashed)
-	_exit(127);
-    crashed = 1;
-    error("Fatal signal %d", sig);
-    if (conn_running)
-	kill_my_pg(SIGTERM);
-    notify(sigreceived, sig);
-    die(127);
-}
-
-
-/*
- * device_script - run a program to talk to the specified fds
- * (e.g. to run the connector or disconnector script).
- * stderr gets connected to the log fd or to the _PATH_CONNERRS file.
- */
-int
-device_script(program, in, out, dont_wait)
-    char *program;
-    int in, out;
-    int dont_wait;
-{
-    int pid, fd;
-    int status = -1;
-    int errfd;
-
-    ++conn_running;
-    pid = fork();
-
-    if (pid < 0) {
-	--conn_running;
-	error("Failed to create child process: %m");
-	return -1;
-    }
-
-    if (pid != 0) {
-	if (dont_wait) {
-	    record_child(pid, program, NULL, NULL);
-	    status = 0;
-	} else {
-	    while (waitpid(pid, &status, 0) < 0) {
-		if (errno == EINTR)
-		    continue;
-		fatal("error waiting for (dis)connection process: %m");
-	    }
-	    --conn_running;
-	}
-	return (status == 0 ? 0 : -1);
-    }
-
-    /* here we are executing in the child */
-    /* make sure fds 0, 1, 2 are occupied */
-    while ((fd = dup(in)) >= 0) {
-	if (fd > 2) {
-	    close(fd);
-	    break;
-	}
-    }
-
-    /* dup in and out to fds > 2 */
-    in = dup(in);
-    out = dup(out);
-    if (log_to_fd >= 0) {
-	errfd = dup(log_to_fd);
-    } else {
-	errfd = open(_PATH_CONNERRS, O_WRONLY | O_APPEND | O_CREAT, 0600);
-    }
-
-    /* close fds 0 - 2 and any others we can think of */
-    close(0);
-    close(1);
-    close(2);
-    sys_close();
-    if (the_channel->close)
-	(*the_channel->close)();
-    closelog();
-
-    /* dup the in, out, err fds to 0, 1, 2 */
-    dup2(in, 0);
-    close(in);
-    dup2(out, 1);
-    close(out);
-    if (errfd >= 0) {
-	dup2(errfd, 2);
-	close(errfd);
-    }
-
-    setuid(uid);
-    if (getuid() != uid) {
-	error("setuid failed");
-	exit(1);
-    }
-    setgid(getgid());
-    {
-	    int argc = 0;
-	    char * argv[500];
-	    char * ptr = program;
-	    while (ptr != NULL) {
-		    argv[argc] = ptr;
-		    argc++;
-		    ptr = strchr(ptr, ' ');
-		    if (ptr) {
-			    ptr[0] = '\0';
-			    ptr++;
-		    }
-	    }
-	    argv[argc] = NULL;
-	    execv(argv[0], argv);
-	    error("could not exec %s: %m", program);
-	    exit(99);
-    }
-    /* NOTREACHED */
-}
-
-
-/*
- * run-program - execute a program with given arguments,
- * but don't wait for it.
- * If the program can't be executed, logs an error unless
- * must_exist is 0 and the program file doesn't exist.
- * Returns -1 if it couldn't fork, 0 if the file doesn't exist
- * or isn't an executable plain file, or the process ID of the child.
- * If done != NULL, (*done)(arg) will be called later (within
- * reap_kids) iff the return value is > 0.
- */
-pid_t
-run_program(prog, args, must_exist, done, arg)
-    char *prog;
-    char **args;
-    int must_exist;
-    void (*done) __P((void *));
-    void *arg;
-{
-    int pid;
-    struct stat sbuf;
-
-    /*
-     * First check if the file exists and is executable.
-     * We don't use access() because that would use the
-     * real user-id, which might not be root, and the script
-     * might be accessible only to root.
-     */
-    errno = EINVAL;
-    if (stat(prog, &sbuf) < 0 || !S_ISREG(sbuf.st_mode)
-	|| (sbuf.st_mode & (S_IXUSR|S_IXGRP|S_IXOTH)) == 0) {
-	if (must_exist || errno != ENOENT)
-	    warn("Can't execute %s: %m", prog);
-	return 0;
-    }
-
-    pid = fork();
-    if (pid == -1) {
-	error("Failed to create child process for %s: %m", prog);
-	return -1;
-    }
-    if (pid == 0) {
-	int new_fd;
-
-	/* Leave the current location */
-	(void) setsid();	/* No controlling tty. */
-	(void) umask (S_IRWXG|S_IRWXO);
-	(void) chdir ("/");	/* no current directory. */
-	setuid(0);		/* set real UID = root */
-	setgid(getegid());
-
-	/* Ensure that nothing of our device environment is inherited. */
-	sys_close();
-	closelog();
-	close (0);
-	close (1);
-	close (2);
-	if (the_channel->close)
-	    (*the_channel->close)();
-
-        /* Don't pass handles to the PPP device, even by accident. */
-	new_fd = open (_PATH_DEVNULL, O_RDWR);
-	if (new_fd >= 0) {
-	    if (new_fd != 0) {
-	        dup2  (new_fd, 0); /* stdin <- /dev/null */
-		close (new_fd);
-	    }
-	    dup2 (0, 1); /* stdout -> /dev/null */
-	    dup2 (0, 2); /* stderr -> /dev/null */
-	}
-
-#ifdef BSD
-	/* Force the priority back to zero if pppd is running higher. */
-	if (setpriority (PRIO_PROCESS, 0, 0) < 0)
-	    warn("can't reset priority to 0: %m"); 
-#endif
-
-	/* SysV recommends a second fork at this point. */
-
-	/* run the program */
-	execve(prog, args, script_env);
-	if (must_exist || errno != ENOENT) {
-	    /* have to reopen the log, there's nowhere else
-	       for the message to go. */
-	    reopen_log();
-	    syslog(LOG_ERR, "Can't execute %s: %m", prog);
-	    closelog();
-	}
-	_exit(-1);
-    }
-
-    if (debug)
-	dbglog("Script %s started (pid %d)", prog, pid);
-    record_child(pid, prog, done, arg);
-
-    return pid;
-}
-
-
-/*
- * record_child - add a child process to the list for reap_kids
- * to use.
- */
-void
-record_child(pid, prog, done, arg)
-    int pid;
-    char *prog;
-    void (*done) __P((void *));
-    void *arg;
-{
-    struct subprocess *chp;
-
-    ++n_children;
-
-    chp = (struct subprocess *) malloc(sizeof(struct subprocess));
-    if (chp == NULL) {
-	warn("losing track of %s process", prog);
-    } else {
-	chp->pid = pid;
-	chp->prog = prog;
-	chp->done = done;
-	chp->arg = arg;
-	chp->next = children;
-	children = chp;
-    }
-}
-
-
-/*
- * reap_kids - get status from any dead child processes,
- * and log a message for abnormal terminations.
- */
-static int
-reap_kids(waitfor)
-    int waitfor;
-{
-    int pid, status;
-    struct subprocess *chp, **prevp;
-
-    if (n_children == 0)
-	return 0;
-    while ((pid = waitpid(-1, &status, (waitfor? 0: WNOHANG))) != -1
-	   && pid != 0) {
-	for (prevp = &children; (chp = *prevp) != NULL; prevp = &chp->next) {
-	    if (chp->pid == pid) {
-		--n_children;
-		*prevp = chp->next;
-		break;
-	    }
-	}
-	if (WIFSIGNALED(status)) {
-	    warn("Child process %s (pid %d) terminated with signal %d",
-		 (chp? chp->prog: "??"), pid, WTERMSIG(status));
-	} else if (debug)
-	    dbglog("Script %s finished (pid %d), status = 0x%x",
-		   (chp? chp->prog: "??"), pid, status);
-	if (chp && chp->done)
-	    (*chp->done)(chp->arg);
-	if (chp)
-	    free(chp);
-    }
-    if (pid == -1) {
-	if (errno == ECHILD)
-	    return -1;
-	if (errno != EINTR)
-	    error("Error waiting for child process: %m");
-    }
-    return 0;
-}
-
-/*
- * add_notifier - add a new function to be called when something happens.
- */
-void
-add_notifier(notif, func, arg)
-    struct notifier **notif;
-    notify_func func;
-    void *arg;
-{
-    struct notifier *np;
-
-    np = malloc(sizeof(struct notifier));
-    if (np == 0)
-	novm("notifier struct");
-    np->next = *notif;
-    np->func = func;
-    np->arg = arg;
-    *notif = np;
-}
-
-/*
- * remove_notifier - remove a function from the list of things to
- * be called when something happens.
- */
-void
-remove_notifier(notif, func, arg)
-    struct notifier **notif;
-    notify_func func;
-    void *arg;
-{
-    struct notifier *np;
-
-    for (; (np = *notif) != 0; notif = &np->next) {
-	if (np->func == func && np->arg == arg) {
-	    *notif = np->next;
-	    free(np);
-	    break;
-	}
-    }
-}
-
-/*
- * notify - call a set of functions registered with add_notify.
- */
-void
-notify(notif, val)
-    struct notifier *notif;
-    int val;
-{
-    struct notifier *np;
-
-    while ((np = notif) != 0) {
-	notif = np->next;
-	(*np->func)(np->arg, val);
-    }
-}
-
-/*
- * novm - log an error message saying we ran out of memory, and die.
- */
-void
-novm(msg)
-    char *msg;
-{
-    fatal("Virtual memory exhausted allocating %s\n", msg);
-}
-
-/*
- * script_setenv - set an environment variable value to be used
- * for scripts that we run (e.g. ip-up, auth-up, etc.)
- */
-void
-script_setenv(var, value, iskey)
-    char *var, *value;
-    int iskey;
-{
-    size_t varl = strlen(var);
-    size_t vl = varl + strlen(value) + 2;
-    int i;
-    char *p, *newstring;
-
-    newstring = (char *) malloc(vl+1);
-    if (newstring == 0)
-	return;
-    *newstring++ = iskey;
-    slprintf(newstring, vl, "%s=%s", var, value);
-
-    /* check if this variable is already set */
-    if (script_env != 0) {
-	for (i = 0; (p = script_env[i]) != 0; ++i) {
-	    if (strncmp(p, var, varl) == 0 && p[varl] == '=') {
-		if (p[-1] && pppdb != NULL)
-		    delete_db_key(p);
-		free(p-1);
-		script_env[i] = newstring;
-		if (iskey && pppdb != NULL)
-		    add_db_key(newstring);
-		update_db_entry();
-		return;
-	    }
-	}
-    } else {
-	/* no space allocated for script env. ptrs. yet */
-	i = 0;
-	script_env = (char **) malloc(16 * sizeof(char *));
-	if (script_env == 0)
-	    return;
-	s_env_nalloc = 16;
-    }
-
-    /* reallocate script_env with more space if needed */
-    if (i + 1 >= s_env_nalloc) {
-	int new_n = i + 17;
-	char **newenv = (char **) realloc((void *)script_env,
-					  new_n * sizeof(char *));
-	if (newenv == 0)
-	    return;
-	script_env = newenv;
-	s_env_nalloc = new_n;
-    }
-
-    script_env[i] = newstring;
-    script_env[i+1] = 0;
-
-    if (pppdb != NULL) {
-	if (iskey)
-	    add_db_key(newstring);
-	update_db_entry();
-    }
-}
-
-/*
- * script_unsetenv - remove a variable from the environment
- * for scripts.
- */
-void
-script_unsetenv(var)
-    char *var;
-{
-    int vl = strlen(var);
-    int i;
-    char *p;
-
-    if (script_env == 0)
-	return;
-    for (i = 0; (p = script_env[i]) != 0; ++i) {
-	if (strncmp(p, var, vl) == 0 && p[vl] == '=') {
-	    if (p[-1] && pppdb != NULL)
-		delete_db_key(p);
-	    free(p-1);
-	    while ((script_env[i] = script_env[i+1]) != 0)
-		++i;
-	    break;
-	}
-    }
-    if (pppdb != NULL)
-	update_db_entry();
-}
-
-/*
- * update_db_entry - update our entry in the database.
- */
-static void
-update_db_entry()
-{
-    TDB_DATA key, dbuf;
-    int vlen, i;
-    char *p, *q, *vbuf;
-
-    if (script_env == NULL)
-	return;
-    vlen = 0;
-    for (i = 0; (p = script_env[i]) != 0; ++i)
-	vlen += strlen(p) + 1;
-    vbuf = malloc(vlen);
-    if (vbuf == 0)
-	novm("database entry");
-    q = vbuf;
-    for (i = 0; (p = script_env[i]) != 0; ++i)
-	q += slprintf(q, vbuf + vlen - q, "%s;", p);
-
-    key.dptr = db_key;
-    key.dsize = strlen(db_key);
-    dbuf.dptr = vbuf;
-    dbuf.dsize = vlen;
-    if (tdb_store(pppdb, key, dbuf, TDB_REPLACE))
-	error("tdb_store failed: %s", tdb_error(pppdb));
-
-}
-
-/*
- * add_db_key - add a key that we can use to look up our database entry.
- */
-static void
-add_db_key(str)
-    const char *str;
-{
-    TDB_DATA key, dbuf;
-
-    key.dptr = (char *) str;
-    key.dsize = strlen(str);
-    dbuf.dptr = db_key;
-    dbuf.dsize = strlen(db_key);
-    if (tdb_store(pppdb, key, dbuf, TDB_REPLACE))
-	error("tdb_store key failed: %s", tdb_error(pppdb));
-}
-
-/*
- * delete_db_key - delete a key for looking up our database entry.
- */
-static void
-delete_db_key(str)
-    const char *str;
-{
-    TDB_DATA key;
-
-    key.dptr = (char *) str;
-    key.dsize = strlen(str);
-    tdb_delete(pppdb, key);
-}
-
-/*
- * cleanup_db - delete all the entries we put in the database.
- */
-static void
-cleanup_db()
-{
-    TDB_DATA key;
-    int i;
-    char *p;
-
-    key.dptr = db_key;
-    key.dsize = strlen(db_key);
-    tdb_delete(pppdb, key);
-    for (i = 0; (p = script_env[i]) != 0; ++i)
-	if (p[-1])
-	    delete_db_key(p);
-}
diff --git a/mdk-stage1/ppp/pppd/md4.c b/mdk-stage1/ppp/pppd/md4.c
deleted file mode 100644
index cda9f943d..000000000
--- a/mdk-stage1/ppp/pppd/md4.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
-** ********************************************************************
-** md4.c -- Implementation of MD4 Message Digest Algorithm           **
-** Updated: 2/16/90 by Ronald L. Rivest                              **
-** (C) 1990 RSA Data Security, Inc.                                  **
-** ********************************************************************
-*/
-
-/*
-** To use MD4:
-**   -- Include md4.h in your program
-**   -- Declare an MDstruct MD to hold the state of the digest
-**          computation.
-**   -- Initialize MD using MDbegin(&MD)
-**   -- For each full block (64 bytes) X you wish to process, call
-**          MD4Update(&MD,X,512)
-**      (512 is the number of bits in a full block.)
-**   -- For the last block (less than 64 bytes) you wish to process,
-**          MD4Update(&MD,X,n)
-**      where n is the number of bits in the partial block. A partial
-**      block terminates the computation, so every MD computation
-**      should terminate by processing a partial block, even if it
-**      has n = 0.
-**   -- The message digest is available in MD.buffer[0] ...
-**      MD.buffer[3].  (Least-significant byte of each word
-**      should be output first.)
-**   -- You can print out the digest using MDprint(&MD)
-*/
-
-/* Implementation notes:
-** This implementation assumes that ints are 32-bit quantities.
-*/
-
-#define TRUE  1
-#define FALSE 0
-
-/* Compile-time includes
-*/
-#include <stdio.h>
-#include "md4.h"
-#include "pppd.h"
-
-/* Compile-time declarations of MD4 "magic constants".
-*/
-#define I0  0x67452301       /* Initial values for MD buffer */
-#define I1  0xefcdab89
-#define I2  0x98badcfe
-#define I3  0x10325476
-#define C2  013240474631     /* round 2 constant = sqrt(2) in octal */
-#define C3  015666365641     /* round 3 constant = sqrt(3) in octal */
-/* C2 and C3 are from Knuth, The Art of Programming, Volume 2
-** (Seminumerical Algorithms), Second Edition (1981), Addison-Wesley.
-** Table 2, page 660.
-*/
-
-#define fs1  3               /* round 1 shift amounts */
-#define fs2  7
-#define fs3 11
-#define fs4 19
-#define gs1  3               /* round 2 shift amounts */
-#define gs2  5
-#define gs3  9
-#define gs4 13
-#define hs1  3               /* round 3 shift amounts */
-#define hs2  9
-#define hs3 11
-#define hs4 15
-
-/* Compile-time macro declarations for MD4.
-** Note: The "rot" operator uses the variable "tmp".
-** It assumes tmp is declared as unsigned int, so that the >>
-** operator will shift in zeros rather than extending the sign bit.
-*/
-#define f(X,Y,Z)             ((X&Y) | ((~X)&Z))
-#define g(X,Y,Z)             ((X&Y) | (X&Z) | (Y&Z))
-#define h(X,Y,Z)             (X^Y^Z)
-#define rot(X,S)             (tmp=X,(tmp<<S) | (tmp>>(32-S)))
-#define ff(A,B,C,D,i,s)      A = rot((A + f(B,C,D) + X[i]),s)
-#define gg(A,B,C,D,i,s)      A = rot((A + g(B,C,D) + X[i] + C2),s)
-#define hh(A,B,C,D,i,s)      A = rot((A + h(B,C,D) + X[i] + C3),s)
-
-/* MD4print(MDp)
-** Print message digest buffer MDp as 32 hexadecimal digits.
-** Order is from low-order byte of buffer[0] to high-order byte of
-** buffer[3].
-** Each byte is printed with high-order hexadecimal digit first.
-** This is a user-callable routine.
-*/
-void
-MD4Print(MDp)
-MD4_CTX *MDp;
-{
-  int i,j;
-  for (i=0;i<4;i++)
-    for (j=0;j<32;j=j+8)
-      printf("%02x",(MDp->buffer[i]>>j) & 0xFF);
-}
-
-/* MD4Init(MDp)
-** Initialize message digest buffer MDp.
-** This is a user-callable routine.
-*/
-void
-MD4Init(MDp)
-MD4_CTX *MDp;
-{
-  int i;
-  MDp->buffer[0] = I0;
-  MDp->buffer[1] = I1;
-  MDp->buffer[2] = I2;
-  MDp->buffer[3] = I3;
-  for (i=0;i<8;i++) MDp->count[i] = 0;
-  MDp->done = 0;
-}
-
-/* MDblock(MDp,X)
-** Update message digest buffer MDp->buffer using 16-word data block X.
-** Assumes all 16 words of X are full of data.
-** Does not update MDp->count.
-** This routine is not user-callable.
-*/
-static void
-MDblock(MDp,Xb)
-MD4_CTX *MDp;
-unsigned char *Xb;
-{
-  register unsigned int tmp, A, B, C, D;
-  unsigned int X[16];
-  int i;
-
-  for (i = 0; i < 16; ++i) {
-    X[i] = Xb[0] + (Xb[1] << 8) + (Xb[2] << 16) + (Xb[3] << 24);
-    Xb += 4;
-  }
-
-  A = MDp->buffer[0];
-  B = MDp->buffer[1];
-  C = MDp->buffer[2];
-  D = MDp->buffer[3];
-  /* Update the message digest buffer */
-  ff(A , B , C , D ,  0 , fs1); /* Round 1 */
-  ff(D , A , B , C ,  1 , fs2);
-  ff(C , D , A , B ,  2 , fs3);
-  ff(B , C , D , A ,  3 , fs4);
-  ff(A , B , C , D ,  4 , fs1);
-  ff(D , A , B , C ,  5 , fs2);
-  ff(C , D , A , B ,  6 , fs3);
-  ff(B , C , D , A ,  7 , fs4);
-  ff(A , B , C , D ,  8 , fs1);
-  ff(D , A , B , C ,  9 , fs2);
-  ff(C , D , A , B , 10 , fs3);
-  ff(B , C , D , A , 11 , fs4);
-  ff(A , B , C , D , 12 , fs1);
-  ff(D , A , B , C , 13 , fs2);
-  ff(C , D , A , B , 14 , fs3);
-  ff(B , C , D , A , 15 , fs4);
-  gg(A , B , C , D ,  0 , gs1); /* Round 2 */
-  gg(D , A , B , C ,  4 , gs2);
-  gg(C , D , A , B ,  8 , gs3);
-  gg(B , C , D , A , 12 , gs4);
-  gg(A , B , C , D ,  1 , gs1);
-  gg(D , A , B , C ,  5 , gs2);
-  gg(C , D , A , B ,  9 , gs3);
-  gg(B , C , D , A , 13 , gs4);
-  gg(A , B , C , D ,  2 , gs1);
-  gg(D , A , B , C ,  6 , gs2);
-  gg(C , D , A , B , 10 , gs3);
-  gg(B , C , D , A , 14 , gs4);
-  gg(A , B , C , D ,  3 , gs1);
-  gg(D , A , B , C ,  7 , gs2);
-  gg(C , D , A , B , 11 , gs3);
-  gg(B , C , D , A , 15 , gs4);
-  hh(A , B , C , D ,  0 , hs1); /* Round 3 */
-  hh(D , A , B , C ,  8 , hs2);
-  hh(C , D , A , B ,  4 , hs3);
-  hh(B , C , D , A , 12 , hs4);
-  hh(A , B , C , D ,  2 , hs1);
-  hh(D , A , B , C , 10 , hs2);
-  hh(C , D , A , B ,  6 , hs3);
-  hh(B , C , D , A , 14 , hs4);
-  hh(A , B , C , D ,  1 , hs1);
-  hh(D , A , B , C ,  9 , hs2);
-  hh(C , D , A , B ,  5 , hs3);
-  hh(B , C , D , A , 13 , hs4);
-  hh(A , B , C , D ,  3 , hs1);
-  hh(D , A , B , C , 11 , hs2);
-  hh(C , D , A , B ,  7 , hs3);
-  hh(B , C , D , A , 15 , hs4);
-  MDp->buffer[0] += A;
-  MDp->buffer[1] += B;
-  MDp->buffer[2] += C;
-  MDp->buffer[3] += D;
-}
-
-/* MD4Update(MDp,X,count)
-** Input: X -- a pointer to an array of unsigned characters.
-**        count -- the number of bits of X to use.
-**          (if not a multiple of 8, uses high bits of last byte.)
-** Update MDp using the number of bits of X given by count.
-** This is the basic input routine for an MD4 user.
-** The routine completes the MD computation when count < 512, so
-** every MD computation should end with one call to MD4Update with a
-** count less than 512.  A call with count 0 will be ignored if the
-** MD has already been terminated (done != 0), so an extra call with
-** count 0 can be given as a "courtesy close" to force termination
-** if desired.
-*/
-void
-MD4Update(MDp,X,count)
-MD4_CTX *MDp;
-unsigned char *X;
-unsigned int count;
-{
-  unsigned int i, tmp, bit, byte, mask;
-  unsigned char XX[64];
-  unsigned char *p;
-
-  /* return with no error if this is a courtesy close with count
-  ** zero and MDp->done is true.
-  */
-  if (count == 0 && MDp->done) return;
-  /* check to see if MD is already done and report error */
-  if (MDp->done)
-  { printf("\nError: MD4Update MD already done."); return; }
-
-  /* Add count to MDp->count */
-  tmp = count;
-  p = MDp->count;
-  while (tmp)
-  { tmp += *p;
-  *p++ = tmp;
-  tmp = tmp >> 8;
-  }
-
-  /* Process data */
-  if (count == 512)
-  { /* Full block of data to handle */
-    MDblock(MDp,X);
-  }
-  else if (count > 512) /* Check for count too large */
-  {
-    printf("\nError: MD4Update called with illegal count value %d.",
-	   count);
-    return;
-  }
-  else /* partial block -- must be last block so finish up */
-  {
-    /* Find out how many bytes and residual bits there are */
-    byte = count >> 3;
-    bit =  count & 7;
-    /* Copy X into XX since we need to modify it */
-    for (i=0;i<=byte;i++)   XX[i] = X[i];
-    for (i=byte+1;i<64;i++) XX[i] = 0;
-    /* Add padding '1' bit and low-order zeros in last byte */
-    mask = 1 << (7 - bit);
-    XX[byte] = (XX[byte] | mask) & ~( mask - 1);
-    /* If room for bit count, finish up with this block */
-    if (byte <= 55)
-    {
-      for (i=0;i<8;i++) XX[56+i] = MDp->count[i];
-      MDblock(MDp,XX);
-    }
-    else /* need to do two blocks to finish up */
-    {
-      MDblock(MDp,XX);
-      for (i=0;i<56;i++) XX[i] = 0;
-      for (i=0;i<8;i++)  XX[56+i] = MDp->count[i];
-      MDblock(MDp,XX);
-    }
-    /* Set flag saying we're done with MD computation */
-    MDp->done = 1;
-  }
-}
-
-/*
-** Finish up MD4 computation and return message digest.
-*/
-void
-MD4Final(buf, MD)
-unsigned char *buf;
-MD4_CTX *MD;
-{
-  int i, j;
-  unsigned int w;
-
-  MD4Update(MD, NULL, 0);
-  for (i = 0; i < 4; ++i) {
-    w = MD->buffer[i];
-    for (j = 0; j < 4; ++j) {
-      *buf++ = w;
-      w >>= 8;
-    }
-  }
-}
-
-/*
-** End of md4.c
-****************************(cut)***********************************/
diff --git a/mdk-stage1/ppp/pppd/md4.h b/mdk-stage1/ppp/pppd/md4.h
deleted file mode 100644
index 80e8f9a2a..000000000
--- a/mdk-stage1/ppp/pppd/md4.h
+++ /dev/null
@@ -1,64 +0,0 @@
-
-/*
-** ********************************************************************
-** md4.h -- Header file for implementation of                        **
-** MD4 Message Digest Algorithm                                      **
-** Updated: 2/13/90 by Ronald L. Rivest                              **
-** (C) 1990 RSA Data Security, Inc.                                  **
-** ********************************************************************
-*/
-
-#ifndef __P
-# if defined(__STDC__) || defined(__GNUC__)
-#  define __P(x) x
-# else
-#  define __P(x) ()
-# endif
-#endif
-
-
-/* MDstruct is the data structure for a message digest computation.
-*/
-typedef struct {
-	unsigned int buffer[4]; /* Holds 4-word result of MD computation */
-	unsigned char count[8]; /* Number of bits processed so far */
-	unsigned int done;      /* Nonzero means MD computation finished */
-} MD4_CTX;
-
-/* MD4Init(MD4_CTX *)
-** Initialize the MD4_CTX prepatory to doing a message digest
-** computation.
-*/
-extern void MD4Init __P((MD4_CTX *MD));
-
-/* MD4Update(MD,X,count)
-** Input: X -- a pointer to an array of unsigned characters.
-**        count -- the number of bits of X to use (an unsigned int).
-** Updates MD using the first "count" bits of X.
-** The array pointed to by X is not modified.
-** If count is not a multiple of 8, MD4Update uses high bits of
-** last byte.
-** This is the basic input routine for a user.
-** The routine terminates the MD computation when count < 512, so
-** every MD computation should end with one call to MD4Update with a
-** count less than 512.  Zero is OK for a count.
-*/
-extern void MD4Update __P((MD4_CTX *MD, unsigned char *X, unsigned int count));
-
-/* MD4Print(MD)
-** Prints message digest buffer MD as 32 hexadecimal digits.
-** Order is from low-order byte of buffer[0] to high-order byte
-** of buffer[3].
-** Each byte is printed with high-order hexadecimal digit first.
-*/
-extern void MD4Print __P((MD4_CTX *));
-
-/* MD4Final(buf, MD)
-** Returns message digest from MD and terminates the message
-** digest computation.
-*/
-extern void MD4Final __P((unsigned char *, MD4_CTX *));
-
-/*
-** End of md4.h
-****************************(cut)***********************************/
diff --git a/mdk-stage1/ppp/pppd/md5.c b/mdk-stage1/ppp/pppd/md5.c
deleted file mode 100644
index 0b8de3aae..000000000
--- a/mdk-stage1/ppp/pppd/md5.c
+++ /dev/null
@@ -1,309 +0,0 @@
-
-
-/*
- ***********************************************************************
- ** md5.c -- the source code for MD5 routines                         **
- ** RSA Data Security, Inc. MD5 Message-Digest Algorithm              **
- ** Created: 2/17/90 RLR                                              **
- ** Revised: 1/91 SRD,AJ,BSK,JT Reference C ver., 7/10 constant corr. **
- ***********************************************************************
- */
-
-/*
- ***********************************************************************
- ** Copyright (C) 1990, RSA Data Security, Inc. All rights reserved.  **
- **                                                                   **
- ** License to copy and use this software is granted provided that    **
- ** it is identified as the "RSA Data Security, Inc. MD5 Message-     **
- ** Digest Algorithm" in all material mentioning or referencing this  **
- ** software or this function.                                        **
- **                                                                   **
- ** License is also granted to make and use derivative works          **
- ** provided that such works are identified as "derived from the RSA  **
- ** Data Security, Inc. MD5 Message-Digest Algorithm" in all          **
- ** material mentioning or referencing the derived work.              **
- **                                                                   **
- ** RSA Data Security, Inc. makes no representations concerning       **
- ** either the merchantability of this software or the suitability    **
- ** of this software for any particular purpose.  It is provided "as  **
- ** is" without express or implied warranty of any kind.              **
- **                                                                   **
- ** These notices must be retained in any copies of any part of this  **
- ** documentation and/or software.                                    **
- ***********************************************************************
- */
-
-#include <stdlib.h>
-#include <string.h>
-
-#include "md5.h"
-
-/*
- ***********************************************************************
- **  Message-digest routines:                                         **
- **  To form the message digest for a message M                       **
- **    (1) Initialize a context buffer mdContext using MD5Init        **
- **    (2) Call MD5Update on mdContext and M                          **
- **    (3) Call MD5Final on mdContext                                 **
- **  The message digest is now in mdContext->digest[0...15]           **
- ***********************************************************************
- */
-
-/* forward declaration */
-static void Transform ();
-
-static unsigned char PADDING[64] = {
-  0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-/* F, G, H and I are basic MD5 functions */
-#define F(x, y, z) (((x) & (y)) | ((~x) & (z)))
-#define G(x, y, z) (((x) & (z)) | ((y) & (~z)))
-#define H(x, y, z) ((x) ^ (y) ^ (z))
-#define I(x, y, z) ((y) ^ ((x) | (~z)))
-
-/* ROTATE_LEFT rotates x left n bits */
-#define ROTATE_LEFT(x, n) (((x) << (n)) | ((x) >> (32-(n))))
-
-/* FF, GG, HH, and II transformations for rounds 1, 2, 3, and 4 */
-/* Rotation is separate from addition to prevent recomputation */
-#define FF(a, b, c, d, x, s, ac) \
-  {(a) += F ((b), (c), (d)) + (x) + (UINT4)(ac); \
-   (a) = ROTATE_LEFT ((a), (s)); \
-   (a) += (b); \
-  }
-#define GG(a, b, c, d, x, s, ac) \
-  {(a) += G ((b), (c), (d)) + (x) + (UINT4)(ac); \
-   (a) = ROTATE_LEFT ((a), (s)); \
-   (a) += (b); \
-  }
-#define HH(a, b, c, d, x, s, ac) \
-  {(a) += H ((b), (c), (d)) + (x) + (UINT4)(ac); \
-   (a) = ROTATE_LEFT ((a), (s)); \
-   (a) += (b); \
-  }
-#define II(a, b, c, d, x, s, ac) \
-  {(a) += I ((b), (c), (d)) + (x) + (UINT4)(ac); \
-   (a) = ROTATE_LEFT ((a), (s)); \
-   (a) += (b); \
-  }
-
-#ifdef __STDC__
-#define UL(x)	x##U
-#else
-#define UL(x)	x
-#endif
-
-/* The routine MD5Init initializes the message-digest context
-   mdContext. All fields are set to zero.
- */
-void MD5Init (mdContext)
-MD5_CTX *mdContext;
-{
-  mdContext->i[0] = mdContext->i[1] = (UINT4)0;
-
-  /* Load magic initialization constants.
-   */
-  mdContext->buf[0] = (UINT4)0x67452301;
-  mdContext->buf[1] = (UINT4)0xefcdab89;
-  mdContext->buf[2] = (UINT4)0x98badcfe;
-  mdContext->buf[3] = (UINT4)0x10325476;
-}
-
-/* The routine MD5Update updates the message-digest context to
-   account for the presence of each of the characters inBuf[0..inLen-1]
-   in the message whose digest is being computed.
- */
-void MD5Update (mdContext, inBuf, inLen)
-MD5_CTX *mdContext;
-unsigned char *inBuf;
-unsigned int inLen;
-{
-  UINT4 in[16];
-  int mdi;
-  unsigned int i, ii;
-
-  /* compute number of bytes mod 64 */
-  mdi = (int)((mdContext->i[0] >> 3) & 0x3F);
-
-  /* update number of bits */
-  if ((mdContext->i[0] + ((UINT4)inLen << 3)) < mdContext->i[0])
-    mdContext->i[1]++;
-  mdContext->i[0] += ((UINT4)inLen << 3);
-  mdContext->i[1] += ((UINT4)inLen >> 29);
-
-  while (inLen--) {
-    /* add new character to buffer, increment mdi */
-    mdContext->in[mdi++] = *inBuf++;
-
-    /* transform if necessary */
-    if (mdi == 0x40) {
-      for (i = 0, ii = 0; i < 16; i++, ii += 4)
-        in[i] = (((UINT4)mdContext->in[ii+3]) << 24) |
-                (((UINT4)mdContext->in[ii+2]) << 16) |
-                (((UINT4)mdContext->in[ii+1]) << 8) |
-                ((UINT4)mdContext->in[ii]);
-      Transform (mdContext->buf, in);
-      mdi = 0;
-    }
-  }
-}
-
-/* The routine MD5Final terminates the message-digest computation and
-   ends with the desired message digest in mdContext->digest[0...15].
- */
-void MD5Final (hash, mdContext)
-unsigned char hash[];
-MD5_CTX *mdContext;
-{
-  UINT4 in[16];
-  int mdi;
-  unsigned int i, ii;
-  unsigned int padLen;
-
-  /* save number of bits */
-  in[14] = mdContext->i[0];
-  in[15] = mdContext->i[1];
-
-  /* compute number of bytes mod 64 */
-  mdi = (int)((mdContext->i[0] >> 3) & 0x3F);
-
-  /* pad out to 56 mod 64 */
-  padLen = (mdi < 56) ? (56 - mdi) : (120 - mdi);
-  MD5Update (mdContext, PADDING, padLen);
-
-  /* append length in bits and transform */
-  for (i = 0, ii = 0; i < 14; i++, ii += 4)
-    in[i] = (((UINT4)mdContext->in[ii+3]) << 24) |
-            (((UINT4)mdContext->in[ii+2]) << 16) |
-            (((UINT4)mdContext->in[ii+1]) << 8) |
-            ((UINT4)mdContext->in[ii]);
-  Transform (mdContext->buf, in);
-
-  /* store buffer in digest */
-  for (i = 0, ii = 0; i < 4; i++, ii += 4) {
-    mdContext->digest[ii] = (unsigned char)(mdContext->buf[i] & 0xFF);
-    mdContext->digest[ii+1] =
-      (unsigned char)((mdContext->buf[i] >> 8) & 0xFF);
-    mdContext->digest[ii+2] =
-      (unsigned char)((mdContext->buf[i] >> 16) & 0xFF);
-    mdContext->digest[ii+3] =
-      (unsigned char)((mdContext->buf[i] >> 24) & 0xFF);
-  }
-  memcpy(hash, mdContext->digest, 16);
-}
-
-/* Basic MD5 step. Transforms buf based on in.
- */
-static void Transform (buf, in)
-UINT4 *buf;
-UINT4 *in;
-{
-  UINT4 a = buf[0], b = buf[1], c = buf[2], d = buf[3];
-
-  /* Round 1 */
-#define S11 7
-#define S12 12
-#define S13 17
-#define S14 22
-  FF ( a, b, c, d, in[ 0], S11, UL(3614090360)); /* 1 */
-  FF ( d, a, b, c, in[ 1], S12, UL(3905402710)); /* 2 */
-  FF ( c, d, a, b, in[ 2], S13, UL( 606105819)); /* 3 */
-  FF ( b, c, d, a, in[ 3], S14, UL(3250441966)); /* 4 */
-  FF ( a, b, c, d, in[ 4], S11, UL(4118548399)); /* 5 */
-  FF ( d, a, b, c, in[ 5], S12, UL(1200080426)); /* 6 */
-  FF ( c, d, a, b, in[ 6], S13, UL(2821735955)); /* 7 */
-  FF ( b, c, d, a, in[ 7], S14, UL(4249261313)); /* 8 */
-  FF ( a, b, c, d, in[ 8], S11, UL(1770035416)); /* 9 */
-  FF ( d, a, b, c, in[ 9], S12, UL(2336552879)); /* 10 */
-  FF ( c, d, a, b, in[10], S13, UL(4294925233)); /* 11 */
-  FF ( b, c, d, a, in[11], S14, UL(2304563134)); /* 12 */
-  FF ( a, b, c, d, in[12], S11, UL(1804603682)); /* 13 */
-  FF ( d, a, b, c, in[13], S12, UL(4254626195)); /* 14 */
-  FF ( c, d, a, b, in[14], S13, UL(2792965006)); /* 15 */
-  FF ( b, c, d, a, in[15], S14, UL(1236535329)); /* 16 */
-
-  /* Round 2 */
-#define S21 5
-#define S22 9
-#define S23 14
-#define S24 20
-  GG ( a, b, c, d, in[ 1], S21, UL(4129170786)); /* 17 */
-  GG ( d, a, b, c, in[ 6], S22, UL(3225465664)); /* 18 */
-  GG ( c, d, a, b, in[11], S23, UL( 643717713)); /* 19 */
-  GG ( b, c, d, a, in[ 0], S24, UL(3921069994)); /* 20 */
-  GG ( a, b, c, d, in[ 5], S21, UL(3593408605)); /* 21 */
-  GG ( d, a, b, c, in[10], S22, UL(  38016083)); /* 22 */
-  GG ( c, d, a, b, in[15], S23, UL(3634488961)); /* 23 */
-  GG ( b, c, d, a, in[ 4], S24, UL(3889429448)); /* 24 */
-  GG ( a, b, c, d, in[ 9], S21, UL( 568446438)); /* 25 */
-  GG ( d, a, b, c, in[14], S22, UL(3275163606)); /* 26 */
-  GG ( c, d, a, b, in[ 3], S23, UL(4107603335)); /* 27 */
-  GG ( b, c, d, a, in[ 8], S24, UL(1163531501)); /* 28 */
-  GG ( a, b, c, d, in[13], S21, UL(2850285829)); /* 29 */
-  GG ( d, a, b, c, in[ 2], S22, UL(4243563512)); /* 30 */
-  GG ( c, d, a, b, in[ 7], S23, UL(1735328473)); /* 31 */
-  GG ( b, c, d, a, in[12], S24, UL(2368359562)); /* 32 */
-
-  /* Round 3 */
-#define S31 4
-#define S32 11
-#define S33 16
-#define S34 23
-  HH ( a, b, c, d, in[ 5], S31, UL(4294588738)); /* 33 */
-  HH ( d, a, b, c, in[ 8], S32, UL(2272392833)); /* 34 */
-  HH ( c, d, a, b, in[11], S33, UL(1839030562)); /* 35 */
-  HH ( b, c, d, a, in[14], S34, UL(4259657740)); /* 36 */
-  HH ( a, b, c, d, in[ 1], S31, UL(2763975236)); /* 37 */
-  HH ( d, a, b, c, in[ 4], S32, UL(1272893353)); /* 38 */
-  HH ( c, d, a, b, in[ 7], S33, UL(4139469664)); /* 39 */
-  HH ( b, c, d, a, in[10], S34, UL(3200236656)); /* 40 */
-  HH ( a, b, c, d, in[13], S31, UL( 681279174)); /* 41 */
-  HH ( d, a, b, c, in[ 0], S32, UL(3936430074)); /* 42 */
-  HH ( c, d, a, b, in[ 3], S33, UL(3572445317)); /* 43 */
-  HH ( b, c, d, a, in[ 6], S34, UL(  76029189)); /* 44 */
-  HH ( a, b, c, d, in[ 9], S31, UL(3654602809)); /* 45 */
-  HH ( d, a, b, c, in[12], S32, UL(3873151461)); /* 46 */
-  HH ( c, d, a, b, in[15], S33, UL( 530742520)); /* 47 */
-  HH ( b, c, d, a, in[ 2], S34, UL(3299628645)); /* 48 */
-
-  /* Round 4 */
-#define S41 6
-#define S42 10
-#define S43 15
-#define S44 21
-  II ( a, b, c, d, in[ 0], S41, UL(4096336452)); /* 49 */
-  II ( d, a, b, c, in[ 7], S42, UL(1126891415)); /* 50 */
-  II ( c, d, a, b, in[14], S43, UL(2878612391)); /* 51 */
-  II ( b, c, d, a, in[ 5], S44, UL(4237533241)); /* 52 */
-  II ( a, b, c, d, in[12], S41, UL(1700485571)); /* 53 */
-  II ( d, a, b, c, in[ 3], S42, UL(2399980690)); /* 54 */
-  II ( c, d, a, b, in[10], S43, UL(4293915773)); /* 55 */
-  II ( b, c, d, a, in[ 1], S44, UL(2240044497)); /* 56 */
-  II ( a, b, c, d, in[ 8], S41, UL(1873313359)); /* 57 */
-  II ( d, a, b, c, in[15], S42, UL(4264355552)); /* 58 */
-  II ( c, d, a, b, in[ 6], S43, UL(2734768916)); /* 59 */
-  II ( b, c, d, a, in[13], S44, UL(1309151649)); /* 60 */
-  II ( a, b, c, d, in[ 4], S41, UL(4149444226)); /* 61 */
-  II ( d, a, b, c, in[11], S42, UL(3174756917)); /* 62 */
-  II ( c, d, a, b, in[ 2], S43, UL( 718787259)); /* 63 */
-  II ( b, c, d, a, in[ 9], S44, UL(3951481745)); /* 64 */
-
-  buf[0] += a;
-  buf[1] += b;
-  buf[2] += c;
-  buf[3] += d;
-}
-
-/*
- ***********************************************************************
- ** End of md5.c                                                      **
- ******************************** (cut) ********************************
- */
diff --git a/mdk-stage1/ppp/pppd/md5.h b/mdk-stage1/ppp/pppd/md5.h
deleted file mode 100644
index 7492b2228..000000000
--- a/mdk-stage1/ppp/pppd/md5.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- ***********************************************************************
- ** md5.h -- header file for implementation of MD5                    **
- ** RSA Data Security, Inc. MD5 Message-Digest Algorithm              **
- ** Created: 2/17/90 RLR                                              **
- ** Revised: 12/27/90 SRD,AJ,BSK,JT Reference C version               **
- ** Revised (for MD5): RLR 4/27/91                                    **
- **   -- G modified to have y&~z instead of y&z                       **
- **   -- FF, GG, HH modified to add in last register done             **
- **   -- Access pattern: round 2 works mod 5, round 3 works mod 3     **
- **   -- distinct additive constant for each step                     **
- **   -- round 4 added, working mod 7                                 **
- ***********************************************************************
- */
-
-/*
- ***********************************************************************
- ** Copyright (C) 1990, RSA Data Security, Inc. All rights reserved.  **
- **                                                                   **
- ** License to copy and use this software is granted provided that    **
- ** it is identified as the "RSA Data Security, Inc. MD5 Message-     **
- ** Digest Algorithm" in all material mentioning or referencing this  **
- ** software or this function.                                        **
- **                                                                   **
- ** License is also granted to make and use derivative works          **
- ** provided that such works are identified as "derived from the RSA  **
- ** Data Security, Inc. MD5 Message-Digest Algorithm" in all          **
- ** material mentioning or referencing the derived work.              **
- **                                                                   **
- ** RSA Data Security, Inc. makes no representations concerning       **
- ** either the merchantability of this software or the suitability    **
- ** of this software for any particular purpose.  It is provided "as  **
- ** is" without express or implied warranty of any kind.              **
- **                                                                   **
- ** These notices must be retained in any copies of any part of this  **
- ** documentation and/or software.                                    **
- ***********************************************************************
- */
-
-#ifndef __MD5_INCLUDE__
-
-/* typedef a 32-bit type */
-typedef unsigned int UINT4;
-
-/* Data structure for MD5 (Message-Digest) computation */
-typedef struct {
-  UINT4 i[2];                   /* number of _bits_ handled mod 2^64 */
-  UINT4 buf[4];                                    /* scratch buffer */
-  unsigned char in[64];                              /* input buffer */
-  unsigned char digest[16];     /* actual digest after MD5Final call */
-} MD5_CTX;
-
-void MD5Init ();
-void MD5Update ();
-void MD5Final ();
-
-#define __MD5_INCLUDE__
-#endif /* __MD5_INCLUDE__ */
diff --git a/mdk-stage1/ppp/pppd/multilink.c b/mdk-stage1/ppp/pppd/multilink.c
deleted file mode 100644
index c30b07e0a..000000000
--- a/mdk-stage1/ppp/pppd/multilink.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/*
- * multilink.c - support routines for multilink.
- *
- * Copyright (c) 2000 Paul Mackerras.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms.  The name of the author may not be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <ctype.h>
-#include <netdb.h>
-#include <errno.h>
-#include <signal.h>
-#include <netinet/in.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "lcp.h"
-#include "tdb.h"
-
-bool endpoint_specified;	/* user gave explicit endpoint discriminator */
-char *bundle_id;		/* identifier for our bundle */
-
-extern TDB_CONTEXT *pppdb;
-extern char db_key[];
-
-static int get_default_epdisc __P((struct epdisc *));
-static int parse_num __P((char *str, const char *key, int *valp));
-static int owns_unit __P((TDB_DATA pid, int unit));
-
-#define set_ip_epdisc(ep, addr) do {	\
-	ep->length = 4;			\
-	ep->value[0] = addr >> 24;	\
-	ep->value[1] = addr >> 16;	\
-	ep->value[2] = addr >> 8;	\
-	ep->value[3] = addr;		\
-} while (0)
-
-#define LOCAL_IP_ADDR(addr)						  \
-	(((addr) & 0xff000000) == 0x0a000000		/* 10.x.x.x */	  \
-	 || ((addr) & 0xfff00000) == 0xac100000		/* 172.16.x.x */  \
-	 || ((addr) & 0xffff0000) == 0xc0a80000)	/* 192.168.x.x */
-
-#define process_exists(n)	(kill((n), 0) == 0 || errno != ESRCH)
-
-void
-mp_check_options()
-{
-	lcp_options *wo = &lcp_wantoptions[0];
-	lcp_options *ao = &lcp_allowoptions[0];
-
-	if (!multilink)
-		return;
-	/* if we're doing multilink, we have to negotiate MRRU */
-	if (!wo->neg_mrru) {
-		/* mrru not specified, default to mru */
-		wo->mrru = wo->mru;
-		wo->neg_mrru = 1;
-	}
-	ao->mrru = ao->mru;
-	ao->neg_mrru = 1;
-
-	if (!wo->neg_endpoint && !noendpoint) {
-		/* get a default endpoint value */
-		wo->neg_endpoint = get_default_epdisc(&wo->endpoint);
-	}
-}
-
-/*
- * Make a new bundle or join us to an existing bundle
- * if we are doing multilink.
- */
-int
-mp_join_bundle()
-{
-	lcp_options *go = &lcp_gotoptions[0];
-	lcp_options *ho = &lcp_hisoptions[0];
-	lcp_options *ao = &lcp_allowoptions[0];
-	int unit, pppd_pid;
-	int l, mtu;
-	char *p;
-	TDB_DATA key, pid, rec;
-
-	if (!go->neg_mrru || !ho->neg_mrru) {
-		/* not doing multilink */
-		if (go->neg_mrru)
-			notice("oops, multilink negotiated only for receive");
-		mtu = ho->neg_mru? ho->mru: PPP_MRU;
-		if (mtu > ao->mru)
-			mtu = ao->mru;
-		if (demand) {
-			/* already have a bundle */
-			cfg_bundle(0, 0, 0, 0);
-			netif_set_mtu(0, mtu);
-			return 0;
-		}
-		make_new_bundle(0, 0, 0, 0);
-		set_ifunit(1);
-		netif_set_mtu(0, mtu);
-		return 0;
-	}
-
-	/*
-	 * Find the appropriate bundle or join a new one.
-	 * First we make up a name for the bundle.
-	 * The length estimate is worst-case assuming every
-	 * character has to be quoted.
-	 */
-	l = 4 * strlen(peer_authname) + 10;
-	if (ho->neg_endpoint)
-		l += 3 * ho->endpoint.length + 8;
-	if (bundle_name)
-		l += 3 * strlen(bundle_name) + 2;
-	bundle_id = malloc(l);
-	if (bundle_id == 0)
-		novm("bundle identifier");
-
-	p = bundle_id;
-	p += slprintf(p, l-1, "BUNDLE=\"%q\"", peer_authname);
-	if (ho->neg_endpoint || bundle_name)
-		*p++ = '/';
-	if (ho->neg_endpoint)
-		p += slprintf(p, bundle_id+l-p, "%s",
-			      epdisc_to_str(&ho->endpoint));
-	if (bundle_name)
-		p += slprintf(p, bundle_id+l-p, "/%v", bundle_name);
-
-	/*
-	 * For demand mode, we only need to configure the bundle
-	 * and attach the link.
-	 */
-	mtu = MIN(ho->mrru, ao->mru);
-	if (demand) {
-		cfg_bundle(go->mrru, ho->mrru, go->neg_ssnhf, ho->neg_ssnhf);
-		netif_set_mtu(0, mtu);
-		script_setenv("BUNDLE", bundle_id + 7, 1);
-		return 0;
-	}
-
-	/*
-	 * Check if the bundle ID is already in the database.
-	 */
-	unit = -1;
-	tdb_writelock(pppdb);
-	key.dptr = bundle_id;
-	key.dsize = p - bundle_id;
-	pid = tdb_fetch(pppdb, key);
-	if (pid.dptr != NULL) {
-		/* bundle ID exists, see if the pppd record exists */
-		rec = tdb_fetch(pppdb, pid);
-		if (rec.dptr != NULL) {
-			/* it is, parse the interface number */
-			parse_num(rec.dptr, "IFNAME=ppp", &unit);
-			/* check the pid value */
-			if (!parse_num(rec.dptr, "PPPD_PID=", &pppd_pid)
-			    || !process_exists(pppd_pid)
-			    || !owns_unit(pid, unit))
-				unit = -1;
-			free(rec.dptr);
-		}
-		free(pid.dptr);
-	}
-
-	if (unit >= 0) {
-		/* attach to existing unit */
-		if (bundle_attach(unit)) {
-			set_ifunit(0);
-			script_setenv("BUNDLE", bundle_id + 7, 0);
-			tdb_writeunlock(pppdb);
-			info("Link attached to %s", ifname);
-			return 1;
-		}
-		/* attach failed because bundle doesn't exist */
-	}
-
-	/* we have to make a new bundle */
-	make_new_bundle(go->mrru, ho->mrru, go->neg_ssnhf, ho->neg_ssnhf);
-	set_ifunit(1);
-	netif_set_mtu(0, mtu);
-	script_setenv("BUNDLE", bundle_id + 7, 1);
-	tdb_writeunlock(pppdb);
-	info("New bundle %s created", ifname);
-	return 0;
-}
-
-static int
-parse_num(str, key, valp)
-     char *str;
-     const char *key;
-     int *valp;
-{
-	char *p, *endp;
-	int i;
-
-	p = strstr(str, key);
-	if (p != 0) {
-		p += strlen(key);
-		i = strtol(p, &endp, 10);
-		if (endp != p && (*endp == 0 || *endp == ';')) {
-			*valp = i;
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * Check whether the pppd identified by `key' still owns ppp unit `unit'.
- */
-static int
-owns_unit(key, unit)
-     TDB_DATA key;
-     int unit;
-{
-	char ifkey[32];
-	TDB_DATA kd, vd;
-	int ret = 0;
-
-	slprintf(ifkey, sizeof(ifkey), "IFNAME=ppp%d", unit);
-	kd.dptr = ifkey;
-	kd.dsize = strlen(ifkey);
-	vd = tdb_fetch(pppdb, kd);
-	if (vd.dptr != NULL) {
-		ret = vd.dsize == key.dsize
-			&& memcmp(vd.dptr, key.dptr, vd.dsize) == 0;
-		free(vd.dptr);
-	}
-	return ret;
-}
-
-static int
-get_default_epdisc(ep)
-     struct epdisc *ep;
-{
-	char *p;
-	struct hostent *hp;
-	u_int32_t addr;
-
-	/* First try for an ethernet MAC address */
-	p = get_first_ethernet();
-	if (p != 0 && get_if_hwaddr(ep->value, p) >= 0) {
-		ep->class = EPD_MAC;
-		ep->length = 6;
-		return 1;
-	}
-
-	/* see if our hostname corresponds to a reasonable IP address */
-	hp = gethostbyname(hostname);
-	if (hp != NULL) {
-		addr = *(u_int32_t *)hp->h_addr;
-		if (!bad_ip_adrs(addr)) {
-			addr = ntohl(addr);
-			if (!LOCAL_IP_ADDR(addr)) {
-				ep->class = EPD_IP;
-				set_ip_epdisc(ep, addr);
-				return 1;
-			}
-		}
-	}
-
-	return 0;
-}
-
-/*
- * epdisc_to_str - make a printable string from an endpoint discriminator.
- */
-
-static char *endp_class_names[] = {
-    "null", "local", "IP", "MAC", "magic", "phone"
-};
-
-char *
-epdisc_to_str(ep)
-     struct epdisc *ep;
-{
-	static char str[MAX_ENDP_LEN*3+8];
-	u_char *p = ep->value;
-	int i, mask = 0;
-	char *q, c, c2;
-
-	if (ep->class == EPD_NULL && ep->length == 0)
-		return "null";
-	if (ep->class == EPD_IP && ep->length == 4) {
-		u_int32_t addr;
-
-		GETLONG(addr, p);
-		slprintf(str, sizeof(str), "IP:%I", htonl(addr));
-		return str;
-	}
-
-	c = ':';
-	c2 = '.';
-	if (ep->class == EPD_MAC && ep->length == 6)
-		c2 = ':';
-	else if (ep->class == EPD_MAGIC && (ep->length % 4) == 0)
-		mask = 3;
-	q = str;
-	if (ep->class <= EPD_PHONENUM)
-		q += slprintf(q, sizeof(str)-1, "%s",
-			      endp_class_names[ep->class]);
-	else
-		q += slprintf(q, sizeof(str)-1, "%d", ep->class);
-	c = ':';
-	for (i = 0; i < ep->length && i < MAX_ENDP_LEN; ++i) {
-		if ((i & mask) == 0) {
-			*q++ = c;
-			c = c2;
-		}
-		q += slprintf(q, str + sizeof(str) - q, "%.2x", ep->value[i]);
-	}
-	return str;
-}
-
-static int hexc_val(int c)
-{
-	if (c >= 'a')
-		return c - 'a' + 10;
-	if (c >= 'A')
-		return c - 'A' + 10;
-	return c - '0';
-}
-
-int
-str_to_epdisc(ep, str)
-     struct epdisc *ep;
-     char *str;
-{
-	int i, l;
-	char *p, *endp;
-
-	for (i = EPD_NULL; i <= EPD_PHONENUM; ++i) {
-		int sl = strlen(endp_class_names[i]);
-		if (strncasecmp(str, endp_class_names[i], sl) == 0) {
-			str += sl;
-			break;
-		}
-	}
-	if (i > EPD_PHONENUM) {
-		/* not a class name, try a decimal class number */
-		i = strtol(str, &endp, 10);
-		if (endp == str)
-			return 0;	/* can't parse class number */
-		str = endp;
-	}
-	ep->class = i;
-	if (*str == 0) {
-		ep->length = 0;
-		return 1;
-	}
-	if (*str != ':' && *str != '.')
-		return 0;
-	++str;
-
-	if (i == EPD_IP) {
-		u_int32_t addr;
-		i = parse_dotted_ip(str, &addr);
-		if (i == 0 || str[i] != 0)
-			return 0;
-		set_ip_epdisc(ep, addr);
-		return 1;
-	}
-	if (i == EPD_MAC && get_if_hwaddr(ep->value, str) >= 0) {
-		ep->length = 6;
-		return 1;
-	}
-
-	p = str;
-	for (l = 0; l < MAX_ENDP_LEN; ++l) {
-		if (*str == 0)
-			break;
-		if (p <= str)
-			for (p = str; isxdigit(*p); ++p)
-				;
-		i = p - str;
-		if (i == 0)
-			return 0;
-		ep->value[l] = hexc_val(*str++);
-		if ((i & 1) == 0)
-			ep->value[l] = (ep->value[l] << 4) + hexc_val(*str++);
-		if (*str == ':' || *str == '.')
-			++str;
-	}
-	if (*str != 0 || (ep->class == EPD_MAC && l != 6))
-		return 0;
-	ep->length = l;
-	return 1;
-}
-
diff --git a/mdk-stage1/ppp/pppd/options.c b/mdk-stage1/ppp/pppd/options.c
deleted file mode 100644
index 1921d9ec5..000000000
--- a/mdk-stage1/ppp/pppd/options.c
+++ /dev/null
@@ -1,1513 +0,0 @@
-/*
- * options.c - handles option processing for PPP.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <ctype.h>
-#include <stdio.h>
-#include <errno.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <syslog.h>
-#include <string.h>
-#include <pwd.h>
-#ifdef PLUGIN
-#include <dlfcn.h>
-#endif
-#ifdef PPP_FILTER
-#include <pcap.h>
-#include <pcap-int.h>	/* XXX: To get struct pcap */
-#endif
-
-#include "pppd.h"
-#include "pathnames.h"
-
-#if defined(ultrix) || defined(NeXT)
-char *strdup __P((char *));
-#endif
-
-static const char rcsid[] = RCSID;
-
-struct option_value {
-    struct option_value *next;
-    const char *source;
-    char value[1];
-};
-
-/*
- * Option variables and default values.
- */
-#ifdef PPP_FILTER
-int	dflag = 0;		/* Tell libpcap we want debugging */
-#endif
-int	debug = 0;		/* Debug flag */
-int	kdebugflag = 0;		/* Tell kernel to print debug messages */
-int	default_device = 1;	/* Using /dev/tty or equivalent */
-char	devnam[MAXPATHLEN];	/* Device name */
-bool	nodetach = 0;		/* Don't detach from controlling tty */
-bool	updetach = 0;		/* Detach once link is up */
-int	maxconnect = 0;		/* Maximum connect time */
-char	user[MAXNAMELEN];	/* Username for PAP */
-char	passwd[MAXSECRETLEN];	/* Password for PAP */
-bool	persist = 0;		/* Reopen link after it goes down */
-char	our_name[MAXNAMELEN];	/* Our name for authentication purposes */
-bool	demand = 0;		/* do dial-on-demand */
-char	*ipparam = NULL;	/* Extra parameter for ip up/down scripts */
-int	idle_time_limit = 0;	/* Disconnect if idle for this many seconds */
-int	holdoff = 30;		/* # seconds to pause before reconnecting */
-bool	holdoff_specified;	/* true if a holdoff value has been given */
-int	log_to_fd = 1;		/* send log messages to this fd too */
-bool	log_default = 1;	/* log_to_fd is default (stdout) */
-int	maxfail = 10;		/* max # of unsuccessful connection attempts */
-char	linkname[MAXPATHLEN];	/* logical name for link */
-bool	tune_kernel;		/* may alter kernel settings */
-int	connect_delay = 1000;	/* wait this many ms after connect script */
-int	req_unit = -1;		/* requested interface unit */
-bool	multilink = 0;		/* Enable multilink operation */
-char	*bundle_name = NULL;	/* bundle name for multilink */
-bool	dump_options;		/* print out option values */
-bool	dryrun;			/* print out option values and exit */
-char	*domain;		/* domain name set by domain option */
-
-extern option_t auth_options[];
-extern struct stat devstat;
-
-#ifdef PPP_FILTER
-struct	bpf_program pass_filter;/* Filter program for packets to pass */
-struct	bpf_program active_filter; /* Filter program for link-active pkts */
-pcap_t  pc;			/* Fake struct pcap so we can compile expr */
-#endif
-
-char *current_option;		/* the name of the option being parsed */
-int  privileged_option;		/* set iff the current option came from root */
-char *option_source;		/* string saying where the option came from */
-int  option_priority = OPRIO_CFGFILE; /* priority of the current options */
-bool devnam_fixed;		/* can no longer change device name */
-
-static int logfile_fd = -1;	/* fd opened for log file */
-static char logfile_name[MAXPATHLEN];	/* name of log file */
-
-/*
- * Prototypes
- */
-static int setdomain __P((char **));
-static int readfile __P((char **));
-static int callfile __P((char **));
-static int showversion __P((char **));
-static int showhelp __P((char **));
-static void usage __P((void));
-static int setlogfile __P((char **));
-#ifdef PLUGIN
-static int loadplugin __P((char **));
-#endif
-
-#ifdef PPP_FILTER
-static int setpassfilter __P((char **));
-static int setactivefilter __P((char **));
-#endif
-
-static option_t *find_option __P((const char *name));
-static int process_option __P((option_t *, char *, char **));
-static int n_arguments __P((option_t *));
-static int number_option __P((char *, u_int32_t *, int));
-
-/*
- * Structure to store extra lists of options.
- */
-struct option_list {
-    option_t *options;
-    struct option_list *next;
-};
-
-static struct option_list *extra_options = NULL;
-
-/*
- * Valid arguments.
- */
-option_t general_options[] = {
-    { "debug", o_int, &debug,
-      "Increase debugging level", OPT_INC | OPT_NOARG | 1 },
-    { "-d", o_int, &debug,
-      "Increase debugging level",
-      OPT_ALIAS | OPT_INC | OPT_NOARG | 1 },
-
-    { "kdebug", o_int, &kdebugflag,
-      "Set kernel driver debug level", OPT_PRIO },
-
-    { "nodetach", o_bool, &nodetach,
-      "Don't detach from controlling tty", OPT_PRIO | 1 },
-    { "-detach", o_bool, &nodetach,
-      "Don't detach from controlling tty", OPT_ALIAS | OPT_PRIOSUB | 1 },
-    { "updetach", o_bool, &updetach,
-      "Detach from controlling tty once link is up",
-      OPT_PRIOSUB | OPT_A2CLR | 1, &nodetach },
-
-    { "holdoff", o_int, &holdoff,
-      "Set time in seconds before retrying connection", OPT_PRIO },
-
-    { "idle", o_int, &idle_time_limit,
-      "Set time in seconds before disconnecting idle link", OPT_PRIO },
-
-    { "maxconnect", o_int, &maxconnect,
-      "Set connection time limit",
-      OPT_PRIO | OPT_LLIMIT | OPT_NOINCR | OPT_ZEROINF },
-
-    { "domain", o_special, (void *)setdomain,
-      "Add given domain name to hostname",
-      OPT_PRIO | OPT_PRIV | OPT_A2STRVAL, &domain },
-
-    { "file", o_special, (void *)readfile,
-      "Take options from a file", OPT_NOPRINT },
-    { "call", o_special, (void *)callfile,
-      "Take options from a privileged file", OPT_NOPRINT },
-
-    { "persist", o_bool, &persist,
-      "Keep on reopening connection after close", OPT_PRIO | 1 },
-    { "nopersist", o_bool, &persist,
-      "Turn off persist option", OPT_PRIOSUB },
-
-    { "demand", o_bool, &demand,
-      "Dial on demand", OPT_INITONLY | 1, &persist },
-
-    { "--version", o_special_noarg, (void *)showversion,
-      "Show version number" },
-    { "--help", o_special_noarg, (void *)showhelp,
-      "Show brief listing of options" },
-    { "-h", o_special_noarg, (void *)showhelp,
-      "Show brief listing of options", OPT_ALIAS },
-
-    { "logfile", o_special, (void *)setlogfile,
-      "Append log messages to this file",
-      OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, &logfile_name },
-    { "logfd", o_int, &log_to_fd,
-      "Send log messages to this file descriptor",
-      OPT_PRIOSUB | OPT_A2CLR, &log_default },
-    { "nolog", o_int, &log_to_fd,
-      "Don't send log messages to any file",
-      OPT_PRIOSUB | OPT_NOARG | OPT_VAL(-1) },
-    { "nologfd", o_int, &log_to_fd,
-      "Don't send log messages to any file descriptor",
-      OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) },
-
-    { "linkname", o_string, linkname,
-      "Set logical name for link",
-      OPT_PRIO | OPT_PRIV | OPT_STATIC, NULL, MAXPATHLEN },
-
-    { "maxfail", o_int, &maxfail,
-      "Maximum number of unsuccessful connection attempts to allow",
-      OPT_PRIO },
-
-    { "ktune", o_bool, &tune_kernel,
-      "Alter kernel settings as necessary", OPT_PRIO | 1 },
-    { "noktune", o_bool, &tune_kernel,
-      "Don't alter kernel settings", OPT_PRIOSUB },
-
-    { "connect-delay", o_int, &connect_delay,
-      "Maximum time (in ms) to wait after connect script finishes",
-      OPT_PRIO },
-
-    { "unit", o_int, &req_unit,
-      "PPP interface unit number to use if possible",
-      OPT_PRIO | OPT_LLIMIT, 0, 0 },
-
-    { "dump", o_bool, &dump_options,
-      "Print out option values after parsing all options", 1 },
-    { "dryrun", o_bool, &dryrun,
-      "Stop after parsing, printing, and checking options", 1 },
-
-#ifdef HAVE_MULTILINK
-    { "multilink", o_bool, &multilink,
-      "Enable multilink operation", OPT_PRIO | 1 },
-    { "mp", o_bool, &multilink,
-      "Enable multilink operation", OPT_PRIOSUB | OPT_ALIAS | 1 },
-    { "nomultilink", o_bool, &multilink,
-      "Disable multilink operation", OPT_PRIOSUB | 0 },
-    { "nomp", o_bool, &multilink,
-      "Disable multilink operation", OPT_PRIOSUB | OPT_ALIAS | 0 },
-
-    { "bundle", o_string, &bundle_name,
-      "Bundle name for multilink", OPT_PRIO },
-#endif /* HAVE_MULTILINK */
-
-#ifdef PLUGIN
-    { "plugin", o_special, (void *)loadplugin,
-      "Load a plug-in module into pppd", OPT_PRIV | OPT_A2LIST },
-#endif
-
-#ifdef PPP_FILTER
-    { "pdebug", o_int, &dflag,
-      "libpcap debugging", OPT_PRIO },
-
-    { "pass-filter", 1, setpassfilter,
-      "set filter for packets to pass", OPT_PRIO },
-
-    { "active-filter", 1, setactivefilter,
-      "set filter for active pkts", OPT_PRIO },
-#endif
-
-    { NULL }
-};
-
-#ifndef IMPLEMENTATION
-#define IMPLEMENTATION ""
-#endif
-
-static char *usage_string = "\
-pppd version %s\n\
-Usage: %s [ options ], where options are:\n\
-	<device>	Communicate over the named device\n\
-	<speed>		Set the baud rate to <speed>\n\
-	<loc>:<rem>	Set the local and/or remote interface IP\n\
-			addresses.  Either one may be omitted.\n\
-	asyncmap <n>	Set the desired async map to hex <n>\n\
-	auth		Require authentication from peer\n\
-        connect <p>     Invoke shell command <p> to set up the serial line\n\
-	crtscts		Use hardware RTS/CTS flow control\n\
-	defaultroute	Add default route through interface\n\
-	file <f>	Take options from file <f>\n\
-	modem		Use modem control lines\n\
-	mru <n>		Set MRU value to <n> for negotiation\n\
-See pppd(8) for more options.\n\
-";
-
-/*
- * parse_args - parse a string of arguments from the command line.
- */
-int
-parse_args(argc, argv)
-    int argc;
-    char **argv;
-{
-    char *arg;
-    option_t *opt;
-    int n;
-
-    privileged_option = privileged;
-    option_source = "command line";
-    option_priority = OPRIO_CMDLINE;
-    while (argc > 0) {
-	arg = *argv++;
-	--argc;
-	opt = find_option(arg);
-	if (opt == NULL) {
-	    option_error("unrecognized option '%s'", arg);
-	    usage();
-	    return 0;
-	}
-	n = n_arguments(opt);
-	if (argc < n) {
-	    option_error("too few parameters for option %s", arg);
-	    return 0;
-	}
-	if (!process_option(opt, arg, argv))
-	    return 0;
-	argc -= n;
-	argv += n;
-    }
-    return 1;
-}
-
-/*
- * options_from_file - Read a string of options from a file,
- * and interpret them.
- */
-int
-options_from_file(filename, must_exist, check_prot, priv)
-    char *filename;
-    int must_exist;
-    int check_prot;
-    int priv;
-{
-    FILE *f;
-    int i, newline, ret, err;
-    option_t *opt;
-    int oldpriv, n;
-    char *oldsource;
-    char *argv[MAXARGS];
-    char args[MAXARGS][MAXWORDLEN];
-    char cmd[MAXWORDLEN];
-
-    if (check_prot)
-	seteuid(getuid());
-    f = fopen(filename, "r");
-    err = errno;
-    if (check_prot)
-	seteuid(0);
-    if (f == NULL) {
-	errno = err;
-	if (!must_exist) {
-	    if (err != ENOENT && err != ENOTDIR)
-		warn("Warning: can't open options file %s: %m", filename);
-	    return 1;
-	}
-	option_error("Can't open options file %s: %m", filename);
-	return 0;
-    }
-
-    oldpriv = privileged_option;
-    privileged_option = priv;
-    oldsource = option_source;
-    option_source = strdup(filename);
-    if (option_source == NULL)
-	option_source = "file";
-    ret = 0;
-    while (getword(f, cmd, &newline, filename)) {
-	opt = find_option(cmd);
-	if (opt == NULL) {
-	    option_error("In file %s: unrecognized option '%s'",
-			 filename, cmd);
-	    goto err;
-	}
-	n = n_arguments(opt);
-	for (i = 0; i < n; ++i) {
-	    if (!getword(f, args[i], &newline, filename)) {
-		option_error(
-			"In file %s: too few parameters for option '%s'",
-			filename, cmd);
-		goto err;
-	    }
-	    argv[i] = args[i];
-	}
-	if (!process_option(opt, cmd, argv))
-	    goto err;
-    }
-    ret = 1;
-
-err:
-    fclose(f);
-    privileged_option = oldpriv;
-    option_source = oldsource;
-    return ret;
-}
-
-/*
- * options_from_user - See if the use has a ~/.ppprc file,
- * and if so, interpret options from it.
- */
-int
-options_from_user()
-{
-    char *user, *path, *file;
-    int ret;
-    struct passwd *pw;
-    size_t pl;
-
-    pw = getpwuid(getuid());
-    if (pw == NULL || (user = pw->pw_dir) == NULL || user[0] == 0)
-	return 1;
-    file = _PATH_USEROPT;
-    pl = strlen(user) + strlen(file) + 2;
-    path = malloc(pl);
-    if (path == NULL)
-	novm("init file name");
-    slprintf(path, pl, "%s/%s", user, file);
-    option_priority = OPRIO_CFGFILE;
-    ret = options_from_file(path, 0, 1, privileged);
-    free(path);
-    return ret;
-}
-
-/*
- * options_for_tty - See if an options file exists for the serial
- * device, and if so, interpret options from it.
- * We only allow the per-tty options file to override anything from
- * the command line if it is something that the user can't override
- * once it has been set by root; this is done by giving configuration
- * files a lower priority than the command line.
- */
-int
-options_for_tty()
-{
-    char *dev, *path, *p;
-    int ret;
-    size_t pl;
-
-    dev = devnam;
-    if (strncmp(dev, "/dev/", 5) == 0)
-	dev += 5;
-    if (dev[0] == 0 || strcmp(dev, "tty") == 0)
-	return 1;		/* don't look for /etc/ppp/options.tty */
-    pl = strlen(_PATH_TTYOPT) + strlen(dev) + 1;
-    path = malloc(pl);
-    if (path == NULL)
-	novm("tty init file name");
-    slprintf(path, pl, "%s%s", _PATH_TTYOPT, dev);
-    /* Turn slashes into dots, for Solaris case (e.g. /dev/term/a) */
-    for (p = path + strlen(_PATH_TTYOPT); *p != 0; ++p)
-	if (*p == '/')
-	    *p = '.';
-    option_priority = OPRIO_CFGFILE;
-    ret = options_from_file(path, 0, 0, 1);
-    free(path);
-    return ret;
-}
-
-/*
- * options_from_list - process a string of options in a wordlist.
- */
-int
-options_from_list(w, priv)
-    struct wordlist *w;
-    int priv;
-{
-    char *argv[MAXARGS];
-    option_t *opt;
-    int i, n, ret = 0;
-    struct wordlist *w0;
-
-    privileged_option = priv;
-    option_source = "secrets file";
-    option_priority = OPRIO_SECFILE;
-
-    while (w != NULL) {
-	opt = find_option(w->word);
-	if (opt == NULL) {
-	    option_error("In secrets file: unrecognized option '%s'",
-			 w->word);
-	    goto err;
-	}
-	n = n_arguments(opt);
-	w0 = w;
-	for (i = 0; i < n; ++i) {
-	    w = w->next;
-	    if (w == NULL) {
-		option_error(
-			"In secrets file: too few parameters for option '%s'",
-			w0->word);
-		goto err;
-	    }
-	    argv[i] = w->word;
-	}
-	if (!process_option(opt, w0->word, argv))
-	    goto err;
-	w = w->next;
-    }
-    ret = 1;
-
-err:
-    return ret;
-}
-
-/*
- * match_option - see if this option matches an option_t structure.
- */
-static int
-match_option(name, opt, dowild)
-    char *name;
-    option_t *opt;
-    int dowild;
-{
-	int (*match) __P((char *, char **, int));
-
-	if (dowild != (opt->type == o_wild))
-		return 0;
-	if (!dowild)
-		return strcmp(name, opt->name) == 0;
-	match = (int (*) __P((char *, char **, int))) opt->addr;
-	return (*match)(name, NULL, 0);
-}
-
-/*
- * find_option - scan the option lists for the various protocols
- * looking for an entry with the given name.
- * This could be optimized by using a hash table.
- */
-static option_t *
-find_option(name)
-    const char *name;
-{
-	option_t *opt;
-	struct option_list *list;
-	int i, dowild;
-
-	for (dowild = 0; dowild <= 1; ++dowild) {
-		for (opt = general_options; opt->name != NULL; ++opt)
-			if (match_option(name, opt, dowild))
-				return opt;
-		for (opt = auth_options; opt->name != NULL; ++opt)
-			if (match_option(name, opt, dowild))
-				return opt;
-		for (list = extra_options; list != NULL; list = list->next)
-			for (opt = list->options; opt->name != NULL; ++opt)
-				if (match_option(name, opt, dowild))
-					return opt;
-		for (opt = the_channel->options; opt->name != NULL; ++opt)
-			if (match_option(name, opt, dowild))
-				return opt;
-		for (i = 0; protocols[i] != NULL; ++i)
-			if ((opt = protocols[i]->options) != NULL)
-				for (; opt->name != NULL; ++opt)
-					if (match_option(name, opt, dowild))
-						return opt;
-	}
-	return NULL;
-}
-
-/*
- * process_option - process one new-style option.
- */
-static int
-process_option(opt, cmd, argv)
-    option_t *opt;
-    char *cmd;
-    char **argv;
-{
-    u_int32_t v;
-    int iv, a;
-    char *sv;
-    int (*parser) __P((char **));
-    int (*wildp) __P((char *, char **, int));
-    char *optopt = (opt->type == o_wild)? "": " option";
-    int prio = option_priority;
-    option_t *mainopt = opt;
-
-    if ((opt->flags & OPT_PRIVFIX) && privileged_option)
-	prio += OPRIO_ROOT;
-    while (mainopt->flags & OPT_PRIOSUB)
-	--mainopt;
-    if (mainopt->flags & OPT_PRIO) {
-	if (prio < mainopt->priority) {
-	    /* new value doesn't override old */
-	    if (prio == OPRIO_CMDLINE && mainopt->priority > OPRIO_ROOT) {
-		option_error("%s%s set in %s cannot be overridden\n",
-			     opt->name, optopt, mainopt->source);
-		return 0;
-	    }
-	    return 1;
-	}
-	if (prio > OPRIO_ROOT && mainopt->priority == OPRIO_CMDLINE)
-	    warn("%s%s from %s overrides command line",
-		 opt->name, optopt, option_source);
-    }
-
-    if ((opt->flags & OPT_INITONLY) && phase != PHASE_INITIALIZE) {
-	option_error("%s%s cannot be changed after initialization",
-		     opt->name, optopt);
-	return 0;
-    }
-    if ((opt->flags & OPT_PRIV) && !privileged_option) {
-	option_error("using the %s%s requires root privilege",
-		     opt->name, optopt);
-	return 0;
-    }
-    if ((opt->flags & OPT_ENABLE) && *(bool *)(opt->addr2) == 0) {
-	option_error("%s%s is disabled", opt->name, optopt);
-	return 0;
-    }
-    if ((opt->flags & OPT_DEVEQUIV) && devnam_fixed) {
-	option_error("the %s%s may not be changed in %s",
-		     opt->name, optopt, option_source);
-	return 0;
-    }
-
-    switch (opt->type) {
-    case o_bool:
-	v = opt->flags & OPT_VALUE;
-	*(bool *)(opt->addr) = v;
-	if (opt->addr2 && (opt->flags & OPT_A2COPY))
-	    *(bool *)(opt->addr2) = v;
-	break;
-
-    case o_int:
-	iv = 0;
-	if ((opt->flags & OPT_NOARG) == 0) {
-	    if (!int_option(*argv, &iv))
-		return 0;
-	    if ((((opt->flags & OPT_LLIMIT) && iv < opt->lower_limit)
-		 || ((opt->flags & OPT_ULIMIT) && iv > opt->upper_limit))
-		&& !((opt->flags & OPT_ZEROOK && iv == 0))) {
-		char *zok = (opt->flags & OPT_ZEROOK)? " zero or": "";
-		switch (opt->flags & OPT_LIMITS) {
-		case OPT_LLIMIT:
-		    option_error("%s value must be%s >= %d",
-				 opt->name, zok, opt->lower_limit);
-		    break;
-		case OPT_ULIMIT:
-		    option_error("%s value must be%s <= %d",
-				 opt->name, zok, opt->upper_limit);
-		    break;
-		case OPT_LIMITS:
-		    option_error("%s value must be%s between %d and %d",
-				opt->name, opt->lower_limit, opt->upper_limit);
-		    break;
-		}
-		return 0;
-	    }
-	}
-	a = opt->flags & OPT_VALUE;
-	if (a >= 128)
-	    a -= 256;		/* sign extend */
-	iv += a;
-	if (opt->flags & OPT_INC)
-	    iv += *(int *)(opt->addr);
-	if ((opt->flags & OPT_NOINCR) && !privileged_option) {
-	    int oldv = *(int *)(opt->addr);
-	    if ((opt->flags & OPT_ZEROINF) ?
-		(oldv != 0 && (iv == 0 || iv > oldv)) : (iv > oldv)) {
-		option_error("%s value cannot be increased", opt->name);
-		return 0;
-	    }
-	}
-	*(int *)(opt->addr) = iv;
-	if (opt->addr2 && (opt->flags & OPT_A2COPY))
-	    *(int *)(opt->addr2) = iv;
-	break;
-
-    case o_uint32:
-	if (opt->flags & OPT_NOARG) {
-	    v = opt->flags & OPT_VALUE;
-	    if (v & 0x80)
-		    v |= 0xffffff00U;
-	} else if (!number_option(*argv, &v, 16))
-	    return 0;
-	if (opt->flags & OPT_OR)
-	    v |= *(u_int32_t *)(opt->addr);
-	*(u_int32_t *)(opt->addr) = v;
-	if (opt->addr2 && (opt->flags & OPT_A2COPY))
-	    *(u_int32_t *)(opt->addr2) = v;
-	break;
-
-    case o_string:
-	if (opt->flags & OPT_STATIC) {
-	    strlcpy((char *)(opt->addr), *argv, opt->upper_limit);
-	} else {
-	    sv = strdup(*argv);
-	    if (sv == NULL)
-		novm("option argument");
-	    *(char **)(opt->addr) = sv;
-	}
-	break;
-
-    case o_special_noarg:
-    case o_special:
-	parser = (int (*) __P((char **))) opt->addr;
-	if (!(*parser)(argv))
-	    return 0;
-	if (opt->flags & OPT_A2LIST) {
-	    struct option_value *ovp, **pp;
-
-	    ovp = malloc(sizeof(*ovp) + strlen(*argv));
-	    if (ovp != 0) {
-		strcpy(ovp->value, *argv);
-		ovp->source = option_source;
-		ovp->next = NULL;
-		pp = (struct option_value **) &opt->addr2;
-		while (*pp != 0)
-		    pp = &(*pp)->next;
-		*pp = ovp;
-	    }
-	}
-	break;
-
-    case o_wild:
-	wildp = (int (*) __P((char *, char **, int))) opt->addr;
-	if (!(*wildp)(cmd, argv, 1))
-	    return 0;
-	break;
-    }
-
-    if (opt->addr2 && (opt->flags & (OPT_A2COPY|OPT_ENABLE
-		|OPT_A2PRINTER|OPT_A2STRVAL|OPT_A2LIST)) == 0)
-	*(bool *)(opt->addr2) = !(opt->flags & OPT_A2CLR);
-
-    mainopt->source = option_source;
-    mainopt->priority = prio;
-    mainopt->winner = opt - mainopt;
-
-    return 1;
-}
-
-/*
- * override_value - if the option priorities would permit us to
- * override the value of option, return 1 and update the priority
- * and source of the option value.  Otherwise returns 0.
- */
-int
-override_value(option, priority, source)
-    const char *option;
-    int priority;
-    const char *source;
-{
-	option_t *opt;
-
-	opt = find_option(option);
-	if (opt == NULL)
-		return 0;
-	while (opt->flags & OPT_PRIOSUB)
-		--opt;
-	if ((opt->flags & OPT_PRIO) && priority < opt->priority)
-		return 0;
-	opt->priority = priority;
-	opt->source = source;
-	opt->winner = -1;
-	return 1;
-}
-
-/*
- * n_arguments - tell how many arguments an option takes
- */
-static int
-n_arguments(opt)
-    option_t *opt;
-{
-	return (opt->type == o_bool || opt->type == o_special_noarg
-		|| (opt->flags & OPT_NOARG))? 0: 1;
-}
-
-/*
- * add_options - add a list of options to the set we grok.
- */
-void
-add_options(opt)
-    option_t *opt;
-{
-    struct option_list *list;
-
-    list = malloc(sizeof(*list));
-    if (list == 0)
-	novm("option list entry");
-    list->options = opt;
-    list->next = extra_options;
-    extra_options = list;
-}
-
-/*
- * check_options - check that options are valid and consistent.
- */
-void
-check_options()
-{
-	if (logfile_fd >= 0 && logfile_fd != log_to_fd)
-		close(logfile_fd);
-}
-
-/*
- * print_option - print out an option and its value
- */
-static void
-print_option(opt, mainopt, printer, arg)
-    option_t *opt, *mainopt;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	int i, v;
-	char *p;
-
-	if (opt->flags & OPT_NOPRINT)
-		return;
-	switch (opt->type) {
-	case o_bool:
-		v = opt->flags & OPT_VALUE;
-		if (*(bool *)opt->addr != v)
-			/* this can happen legitimately, e.g. lock
-			   option turned off for default device */
-			break;
-		printer(arg, "%s", opt->name);
-		break;
-	case o_int:
-		v = opt->flags & OPT_VALUE;
-		if (v >= 128)
-			v -= 256;
-		i = *(int *)opt->addr;
-		if (opt->flags & OPT_NOARG) {
-			printer(arg, "%s", opt->name);
-			if (i != v) {
-				if (opt->flags & OPT_INC) {
-					for (; i > v; i -= v)
-						printer(arg, " %s", opt->name);
-				} else
-					printer(arg, " # oops: %d not %d\n",
-						i, v);
-			}
-		} else {
-			printer(arg, "%s %d", opt->name, i);
-		}
-		break;
-	case o_uint32:
-		printer(arg, "%s", opt->name);
-		if ((opt->flags & OPT_NOARG) == 0)
-			printer(arg, " %x", *(u_int32_t *)opt->addr);
-		break;
-
-	case o_string:
-		if (opt->flags & OPT_HIDE) {
-			p = "??????";
-		} else {
-			p = (char *) opt->addr;
-			if ((opt->flags & OPT_STATIC) == 0)
-				p = *(char **)p;
-		}
-		printer(arg, "%s %q", opt->name, p);
-		break;
-
-	case o_special:
-	case o_special_noarg:
-	case o_wild:
-		if (opt->type != o_wild) {
-			printer(arg, "%s", opt->name);
-			if (n_arguments(opt) == 0)
-				break;
-			printer(arg, " ");
-		}
-		if (opt->flags & OPT_A2PRINTER) {
-			void (*oprt) __P((option_t *,
-					  void ((*)__P((void *, char *, ...))),
-					  void *));
-			oprt = opt->addr2;
-			(*oprt)(opt, printer, arg);
-		} else if (opt->flags & OPT_A2STRVAL) {
-			p = (char *) opt->addr2;
-			if ((opt->flags & OPT_STATIC) == 0)
-				p = *(char **)p;
-			printer("%q", p);
-		} else if (opt->flags & OPT_A2LIST) {
-			struct option_value *ovp;
-
-			ovp = (struct option_value *) opt->addr2;
-			for (;;) {
-				printer(arg, "%q", ovp->value);
-				if ((ovp = ovp->next) == NULL)
-					break;
-				printer(arg, "\t\t# (from %s)\n%s ",
-					ovp->source, opt->name);
-			}
-		} else {
-			printer(arg, "xxx # [don't know how to print value]");
-		}
-		break;
-
-	default:
-		printer(arg, "# %s value (type %d)", opt->name, opt->type);
-		break;
-	}
-	printer(arg, "\t\t# (from %s)\n", mainopt->source);
-}
-
-/*
- * print_option_list - print out options in effect from an
- * array of options.
- */
-static void
-print_option_list(opt, printer, arg)
-    option_t *opt;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	while (opt->name != NULL) {
-		if (opt->priority != OPRIO_DEFAULT
-		    && opt->winner != (short int) -1)
-			print_option(opt + opt->winner, opt, printer, arg);
-		do {
-			++opt;
-		} while (opt->flags & OPT_PRIOSUB);
-	}
-}
-
-/*
- * print_options - print out what options are in effect.
- */
-void
-print_options(printer, arg)
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	struct option_list *list;
-	int i;
-
-	printer(arg, "pppd options in effect:\n");
-	print_option_list(general_options, printer, arg);
-	print_option_list(auth_options, printer, arg);
-	for (list = extra_options; list != NULL; list = list->next)
-		print_option_list(list->options, printer, arg);
-	print_option_list(the_channel->options, printer, arg);
-	for (i = 0; protocols[i] != NULL; ++i)
-		print_option_list(protocols[i]->options, printer, arg);
-}
-
-/*
- * usage - print out a message telling how to use the program.
- */
-static void
-usage()
-{
-    if (phase == PHASE_INITIALIZE)
-	fprintf(stderr, usage_string, VERSION, progname);
-}
-
-/*
- * showhelp - print out usage message and exit.
- */
-static int
-showhelp(argv)
-    char **argv;
-{
-    if (phase == PHASE_INITIALIZE) {
-	usage();
-	exit(0);
-    }
-    return 0;
-}
-
-/*
- * showversion - print out the version number and exit.
- */
-static int
-showversion(argv)
-    char **argv;
-{
-    if (phase == PHASE_INITIALIZE) {
-	fprintf(stderr, "pppd version %s\n", VERSION);
-	exit(0);
-    }
-    return 0;
-}
-
-/*
- * option_error - print a message about an error in an option.
- * The message is logged, and also sent to
- * stderr if phase == PHASE_INITIALIZE.
- */
-void
-option_error __V((char *fmt, ...))
-{
-    va_list args;
-    char buf[1024];
-
-#if defined(__STDC__)
-    va_start(args, fmt);
-#else
-    char *fmt;
-    va_start(args);
-    fmt = va_arg(args, char *);
-#endif
-    vslprintf(buf, sizeof(buf), fmt, args);
-    va_end(args);
-    if (phase == PHASE_INITIALIZE)
-	fprintf(stderr, "%s: %s\n", progname, buf);
-    syslog(LOG_ERR, "%s", buf);
-}
-
-#if 0
-/*
- * readable - check if a file is readable by the real user.
- */
-int
-readable(fd)
-    int fd;
-{
-    uid_t uid;
-    int i;
-    struct stat sbuf;
-
-    uid = getuid();
-    if (uid == 0)
-	return 1;
-    if (fstat(fd, &sbuf) != 0)
-	return 0;
-    if (sbuf.st_uid == uid)
-	return sbuf.st_mode & S_IRUSR;
-    if (sbuf.st_gid == getgid())
-	return sbuf.st_mode & S_IRGRP;
-    for (i = 0; i < ngroups; ++i)
-	if (sbuf.st_gid == groups[i])
-	    return sbuf.st_mode & S_IRGRP;
-    return sbuf.st_mode & S_IROTH;
-}
-#endif
-
-/*
- * Read a word from a file.
- * Words are delimited by white-space or by quotes (" or ').
- * Quotes, white-space and \ may be escaped with \.
- * \<newline> is ignored.
- */
-int
-getword(f, word, newlinep, filename)
-    FILE *f;
-    char *word;
-    int *newlinep;
-    char *filename;
-{
-    int c, len, escape;
-    int quoted, comment;
-    int value, digit, got, n;
-
-#define isoctal(c) ((c) >= '0' && (c) < '8')
-
-    *newlinep = 0;
-    len = 0;
-    escape = 0;
-    comment = 0;
-
-    /*
-     * First skip white-space and comments.
-     */
-    for (;;) {
-	c = getc(f);
-	if (c == EOF)
-	    break;
-
-	/*
-	 * A newline means the end of a comment; backslash-newline
-	 * is ignored.  Note that we cannot have escape && comment.
-	 */
-	if (c == '\n') {
-	    if (!escape) {
-		*newlinep = 1;
-		comment = 0;
-	    } else
-		escape = 0;
-	    continue;
-	}
-
-	/*
-	 * Ignore characters other than newline in a comment.
-	 */
-	if (comment)
-	    continue;
-
-	/*
-	 * If this character is escaped, we have a word start.
-	 */
-	if (escape)
-	    break;
-
-	/*
-	 * If this is the escape character, look at the next character.
-	 */
-	if (c == '\\') {
-	    escape = 1;
-	    continue;
-	}
-
-	/*
-	 * If this is the start of a comment, ignore the rest of the line.
-	 */
-	if (c == '#') {
-	    comment = 1;
-	    continue;
-	}
-
-	/*
-	 * A non-whitespace character is the start of a word.
-	 */
-	if (!isspace(c))
-	    break;
-    }
-
-    /*
-     * Save the delimiter for quoted strings.
-     */
-    if (!escape && (c == '"' || c == '\'')) {
-        quoted = c;
-	c = getc(f);
-    } else
-        quoted = 0;
-
-    /*
-     * Process characters until the end of the word.
-     */
-    while (c != EOF) {
-	if (escape) {
-	    /*
-	     * This character is escaped: backslash-newline is ignored,
-	     * various other characters indicate particular values
-	     * as for C backslash-escapes.
-	     */
-	    escape = 0;
-	    if (c == '\n') {
-	        c = getc(f);
-		continue;
-	    }
-
-	    got = 0;
-	    switch (c) {
-	    case 'a':
-		value = '\a';
-		break;
-	    case 'b':
-		value = '\b';
-		break;
-	    case 'f':
-		value = '\f';
-		break;
-	    case 'n':
-		value = '\n';
-		break;
-	    case 'r':
-		value = '\r';
-		break;
-	    case 's':
-		value = ' ';
-		break;
-	    case 't':
-		value = '\t';
-		break;
-
-	    default:
-		if (isoctal(c)) {
-		    /*
-		     * \ddd octal sequence
-		     */
-		    value = 0;
-		    for (n = 0; n < 3 && isoctal(c); ++n) {
-			value = (value << 3) + (c & 07);
-			c = getc(f);
-		    }
-		    got = 1;
-		    break;
-		}
-
-		if (c == 'x') {
-		    /*
-		     * \x<hex_string> sequence
-		     */
-		    value = 0;
-		    c = getc(f);
-		    for (n = 0; n < 2 && isxdigit(c); ++n) {
-			digit = toupper(c) - '0';
-			if (digit > 10)
-			    digit += '0' + 10 - 'A';
-			value = (value << 4) + digit;
-			c = getc (f);
-		    }
-		    got = 1;
-		    break;
-		}
-
-		/*
-		 * Otherwise the character stands for itself.
-		 */
-		value = c;
-		break;
-	    }
-
-	    /*
-	     * Store the resulting character for the escape sequence.
-	     */
-	    if (len < MAXWORDLEN-1)
-		word[len] = value;
-	    ++len;
-
-	    if (!got)
-		c = getc(f);
-	    continue;
-
-	}
-
-	/*
-	 * Not escaped: see if we've reached the end of the word.
-	 */
-	if (quoted) {
-	    if (c == quoted)
-		break;
-	} else {
-	    if (isspace(c) || c == '#') {
-		ungetc (c, f);
-		break;
-	    }
-	}
-
-	/*
-	 * Backslash starts an escape sequence.
-	 */
-	if (c == '\\') {
-	    escape = 1;
-	    c = getc(f);
-	    continue;
-	}
-
-	/*
-	 * An ordinary character: store it in the word and get another.
-	 */
-	if (len < MAXWORDLEN-1)
-	    word[len] = c;
-	++len;
-
-	c = getc(f);
-    }
-
-    /*
-     * End of the word: check for errors.
-     */
-    if (c == EOF) {
-	if (ferror(f)) {
-	    if (errno == 0)
-		errno = EIO;
-	    option_error("Error reading %s: %m", filename);
-	    die(1);
-	}
-	/*
-	 * If len is zero, then we didn't find a word before the
-	 * end of the file.
-	 */
-	if (len == 0)
-	    return 0;
-    }
-
-    /*
-     * Warn if the word was too long, and append a terminating null.
-     */
-    if (len >= MAXWORDLEN) {
-	option_error("warning: word in file %s too long (%.20s...)",
-		     filename, word);
-	len = MAXWORDLEN - 1;
-    }
-    word[len] = 0;
-
-    return 1;
-
-#undef isoctal
-
-}
-
-/*
- * number_option - parse an unsigned numeric parameter for an option.
- */
-static int
-number_option(str, valp, base)
-    char *str;
-    u_int32_t *valp;
-    int base;
-{
-    char *ptr;
-
-    *valp = strtoul(str, &ptr, base);
-    if (ptr == str) {
-	option_error("invalid numeric parameter '%s' for %s option",
-		     str, current_option);
-	return 0;
-    }
-    return 1;
-}
-
-
-/*
- * int_option - like number_option, but valp is int *,
- * the base is assumed to be 0, and *valp is not changed
- * if there is an error.
- */
-int
-int_option(str, valp)
-    char *str;
-    int *valp;
-{
-    u_int32_t v;
-
-    if (!number_option(str, &v, 0))
-	return 0;
-    *valp = (int) v;
-    return 1;
-}
-
-
-/*
- * The following procedures parse options.
- */
-
-/*
- * readfile - take commands from a file.
- */
-static int
-readfile(argv)
-    char **argv;
-{
-    return options_from_file(*argv, 1, 1, privileged_option);
-}
-
-/*
- * callfile - take commands from /etc/ppp/peers/<name>.
- * Name may not contain /../, start with / or ../, or end in /..
- */
-static int
-callfile(argv)
-    char **argv;
-{
-    char *fname, *arg, *p;
-    int l, ok;
-
-    arg = *argv;
-    ok = 1;
-    if (arg[0] == '/' || arg[0] == 0)
-	ok = 0;
-    else {
-	for (p = arg; *p != 0; ) {
-	    if (p[0] == '.' && p[1] == '.' && (p[2] == '/' || p[2] == 0)) {
-		ok = 0;
-		break;
-	    }
-	    while (*p != '/' && *p != 0)
-		++p;
-	    if (*p == '/')
-		++p;
-	}
-    }
-    if (!ok) {
-	option_error("call option value may not contain .. or start with /");
-	return 0;
-    }
-
-    l = strlen(arg) + strlen(_PATH_PEERFILES) + 1;
-    if ((fname = (char *) malloc(l)) == NULL)
-	novm("call file name");
-    slprintf(fname, l, "%s%s", _PATH_PEERFILES, arg);
-
-    ok = options_from_file(fname, 1, 1, 1);
-
-    free(fname);
-    return ok;
-}
-
-#ifdef PPP_FILTER
-/*
- * setpassfilter - Set the pass filter for packets
- */
-static int
-setpassfilter(argv)
-    char **argv;
-{
-    pc.linktype = DLT_PPP;
-    pc.snapshot = PPP_HDRLEN;
- 
-    if (pcap_compile(&pc, &pass_filter, *argv, 1, netmask) == 0)
-	return 1;
-    option_error("error in pass-filter expression: %s\n", pcap_geterr(&pc));
-    return 0;
-}
-
-/*
- * setactivefilter - Set the active filter for packets
- */
-static int
-setactivefilter(argv)
-    char **argv;
-{
-    pc.linktype = DLT_PPP;
-    pc.snapshot = PPP_HDRLEN;
- 
-    if (pcap_compile(&pc, &active_filter, *argv, 1, netmask) == 0)
-	return 1;
-    option_error("error in active-filter expression: %s\n", pcap_geterr(&pc));
-    return 0;
-}
-#endif
-
-/*
- * setdomain - Set domain name to append to hostname 
- */
-static int
-setdomain(argv)
-    char **argv;
-{
-    gethostname(hostname, MAXNAMELEN);
-    if (**argv != 0) {
-	if (**argv != '.')
-	    strncat(hostname, ".", MAXNAMELEN - strlen(hostname));
-	domain = hostname + strlen(hostname);
-	strncat(hostname, *argv, MAXNAMELEN - strlen(hostname));
-    }
-    hostname[MAXNAMELEN-1] = 0;
-    return (1);
-}
-
-
-static int
-setlogfile(argv)
-    char **argv;
-{
-    int fd, err;
-
-    if (!privileged_option)
-	seteuid(getuid());
-    fd = open(*argv, O_WRONLY | O_APPEND | O_CREAT | O_EXCL, 0644);
-    if (fd < 0 && errno == EEXIST)
-	fd = open(*argv, O_WRONLY | O_APPEND);
-    err = errno;
-    if (!privileged_option)
-	seteuid(0);
-    if (fd < 0) {
-	errno = err;
-	option_error("Can't open log file %s: %m", *argv);
-	return 0;
-    }
-    strlcpy(logfile_name, *argv, sizeof(logfile_name));
-    if (logfile_fd >= 0)
-	close(logfile_fd);
-    logfile_fd = fd;
-    log_to_fd = fd;
-    log_default = 0;
-    return 1;
-}
-
-#ifdef PLUGIN
-static int
-loadplugin(argv)
-    char **argv;
-{
-    char *arg = *argv;
-    void *handle;
-    const char *err;
-    void (*init) __P((void));
-    char *path = arg;
-    const char *vers;
-
-    if (strchr(arg, '/') == 0) {
-	const char *base = _PATH_PLUGIN;
-	int l = strlen(base) + strlen(arg) + 2;
-	path = malloc(l);
-	if (path == 0)
-	    novm("plugin file path");
-	strlcpy(path, base, l);
-	strlcat(path, "/", l);
-	strlcat(path, arg, l);
-    }
-    handle = dlopen(path, RTLD_GLOBAL | RTLD_NOW);
-    if (handle == 0) {
-	err = dlerror();
-	if (err != 0)
-	    option_error("%s", err);
-	option_error("Couldn't load plugin %s", arg);
-	goto err;
-    }
-    init = (void (*)(void))dlsym(handle, "plugin_init");
-    if (init == 0) {
-	option_error("%s has no initialization entry point", arg);
-	goto errclose;
-    }
-    vers = (const char *) dlsym(handle, "pppd_version");
-    if (vers == 0) {
-	warn("Warning: plugin %s has no version information", arg);
-    } else if (strcmp(vers, VERSION) != 0) {
-	option_error("Plugin %s is for pppd version %s, this is %s",
-		     vers, VERSION);
-	goto errclose;
-    }
-    info("Plugin %s loaded.", arg);
-    (*init)();
-    return 1;
-
- errclose:
-    dlclose(handle);
- err:
-    if (path != arg)
-	free(path);
-    return 0;
-}
-#endif /* PLUGIN */
diff --git a/mdk-stage1/ppp/pppd/patchlevel.h b/mdk-stage1/ppp/pppd/patchlevel.h
deleted file mode 100644
index 2a2d816f1..000000000
--- a/mdk-stage1/ppp/pppd/patchlevel.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $Id$ */
-
-#define VERSION		"2.4.1"
-#define DATE		"25 March 2001"
diff --git a/mdk-stage1/ppp/pppd/pathnames.h b/mdk-stage1/ppp/pppd/pathnames.h
deleted file mode 100644
index e80784567..000000000
--- a/mdk-stage1/ppp/pppd/pathnames.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * define path names
- *
- * $Id$
- */
-
-#define _PATH_VARRUN 	"/var/run/"
-#define _PATH_DEVNULL	"/dev/null"
-#define _ROOT_PATH
-
-#define _PATH_UPAPFILE 	 _ROOT_PATH "/etc/ppp/pap-secrets"
-#define _PATH_CHAPFILE 	 _ROOT_PATH "/etc/ppp/chap-secrets"
-#define _PATH_SYSOPTIONS _ROOT_PATH "/etc/ppp/options"
-#define _PATH_IPUP	 _ROOT_PATH "/etc/ppp/ip-up"
-#define _PATH_IPDOWN	 _ROOT_PATH "/etc/ppp/ip-down"
-#define _PATH_AUTHUP	 _ROOT_PATH "/etc/ppp/auth-up"
-#define _PATH_AUTHDOWN	 _ROOT_PATH "/etc/ppp/auth-down"
-#define _PATH_TTYOPT	 _ROOT_PATH "/etc/ppp/options."
-#define _PATH_CONNERRS	 _ROOT_PATH "/etc/ppp/connect-errors"
-#define _PATH_PEERFILES	 _ROOT_PATH "/etc/ppp/peers/"
-#define _PATH_RESOLV	 _ROOT_PATH "/etc/resolv.conf"
-
-#define _PATH_USEROPT	 ".ppprc"
-
-#define _PATH_PPPDB	_ROOT_PATH _PATH_VARRUN "pppd.tdb"
diff --git a/mdk-stage1/ppp/pppd/plugins/Makefile.linux b/mdk-stage1/ppp/pppd/plugins/Makefile.linux
deleted file mode 100644
index a64256461..000000000
--- a/mdk-stage1/ppp/pppd/plugins/Makefile.linux
+++ /dev/null
@@ -1,19 +0,0 @@
-CC	= gcc
-CFLAGS	= -g -O2 -I.. -I../../include -fPIC
-LDFLAGS	= -shared
-INSTALL	= install
-
-all:	minconn.so passprompt.so
-
-minconn.so: minconn.c
-	$(CC) -o $@ $(LDFLAGS) $(CFLAGS) minconn.c
-
-passprompt.so: passprompt.c
-	$(CC) -o $@ $(LDFLAGS) $(CFLAGS) passprompt.c
-
-LIBDIR	= /usr/lib/pppd
-
-install: minconn.so passprompt.so
-	version=`awk -F '"' '/VERSION/ { print $$2; }' ../patchlevel.h`; \
-	$(INSTALL) -d $(LIBDIR)/$$version; \
-	$(INSTALL) $? $(LIBDIR)/$$version
\ No newline at end of file
diff --git a/mdk-stage1/ppp/pppd/plugins/Makefile.sol2 b/mdk-stage1/ppp/pppd/plugins/Makefile.sol2
deleted file mode 100644
index 8f4398258..000000000
--- a/mdk-stage1/ppp/pppd/plugins/Makefile.sol2
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Makefile for plugins on Solaris 2
-#
-# $Id$
-#
-
-include ../../svr4/Makedefs
-
-CFLAGS	= -c -O -I.. -I../../include $(COPTS)
-LDFLAGS	= -G 
-
-all:	minconn.so
-
-minconn.so: minconn.o
-	ld -o $@ $(LDFLAGS) -h $@ minconn.o
-
-minconn.o: minconn.c
-	$(CC) $(CFLAGS) -c $? 
-
-passprompt.so: passprompt.o
-	ld -o $@ $(LDFLAGS) -h $@ passprompt.o
-
-passprompt.o: passprompt.c
-	$(CC) $(CFLAGS) -c $?
-
-clean:
-	rm -f *.o *.so
diff --git a/mdk-stage1/ppp/pppd/plugins/minconn.c b/mdk-stage1/ppp/pppd/plugins/minconn.c
deleted file mode 100644
index 02ea34bf6..000000000
--- a/mdk-stage1/ppp/pppd/plugins/minconn.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * minconn.c - pppd plugin to implement a `minconnect' option.
- *
- * Copyright 1999 Paul Mackerras.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms.  The name of the author
- * may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#include <stddef.h>
-#include <time.h>
-#include "pppd.h"
-
-char pppd_version[] = VERSION;
-
-static int minconnect = 0;
-
-static option_t my_options[] = {
-	{ "minconnect", o_int, &minconnect,
-	  "Set minimum connect time before idle timeout applies" },
-	{ NULL }
-};
-
-static int my_get_idle(struct ppp_idle *idle)
-{
-	time_t t;
-
-	if (idle == NULL)
-		return minconnect? minconnect: idle_time_limit;
-	t = idle->xmit_idle;
-	if (idle->recv_idle < t)
-		t = idle->recv_idle;
-	return idle_time_limit - t;
-}
-
-void plugin_init(void)
-{
-	info("plugin_init");
-	add_options(my_options);
-	idle_time_hook = my_get_idle;
-}
diff --git a/mdk-stage1/ppp/pppd/plugins/passprompt.c b/mdk-stage1/ppp/pppd/plugins/passprompt.c
deleted file mode 100644
index 5e6a7f90b..000000000
--- a/mdk-stage1/ppp/pppd/plugins/passprompt.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * passprompt.c - pppd plugin to invoke an external PAP password prompter
- *
- * Copyright 1999 Paul Mackerras, Alan Curry.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-#include <errno.h>
-#include <unistd.h>
-#include <sys/wait.h>
-#include <syslog.h>
-#include "pppd.h"
-
-char pppd_version[] = VERSION;
-
-static char promptprog[PATH_MAX+1];
-
-static option_t options[] = {
-    { "promptprog", o_string, promptprog,
-      "External PAP password prompting program",
-      OPT_STATIC, NULL, PATH_MAX },
-    { NULL }
-};
-
-static int promptpass(char *user, char *passwd)
-{
-    int p[2];
-    pid_t kid;
-    int readgood, wstat;
-    size_t red;
-
-    if (promptprog[0] == 0 || access(promptprog, X_OK) < 0)
-	return -1;	/* sorry, can't help */
-
-    if (!passwd)
-	return 1;
-
-    if (pipe(p)) {
-	warn("Can't make a pipe for %s", promptprog);
-	return 0;
-    }
-    if ((kid = fork()) == (pid_t) -1) {
-	warn("Can't fork to run %s", promptprog);
-	close(p[0]);
-	close(p[1]);
-	return 0;
-    }
-    if (!kid) {
-	/* we are the child, exec the program */
-	char *argv[4], fdstr[32];
-	sys_close();
-	closelog();
-	close(p[0]);
-	seteuid(getuid());
-	setegid(getgid());
-	argv[0] = promptprog;
-	argv[1] = user;
-	argv[2] = remote_name;
-	sprintf(fdstr, "%d", p[1]);
-	argv[3] = fdstr;
-	argv[4] = 0;
-	execv(*argv, argv);
-	_exit(127);
-    }
-
-    /* we are the parent, read the password from the pipe */
-    close(p[1]);
-    readgood = 0;
-    do {
-	red = read(p[0], passwd + readgood, MAXSECRETLEN-1 - readgood);
-	if (red == 0)
-	    break;
-	if (red < 0) {
-	    error("Can't read secret from %s: %m", promptprog);
-	    readgood = -1;
-	    break;
-	}
-	readgood += red;
-    } while (readgood < MAXSECRETLEN - 1);
-    passwd[readgood] = 0;
-    close(p[0]);
-
-    /* now wait for child to exit */
-    while (waitpid(kid, &wstat, 0) < 0) {
-	if (errno != EINTR) {
-	    warn("error waiting for %s: %m", promptprog);
-	    break;
-	}
-    }
-
-    if (readgood < 0)
-	return 0;
-    if (!WIFEXITED(wstat))
-	warn("%s terminated abnormally", promptprog);
-    if (WEXITSTATUS(wstat))
-	warn("%s exited with code %d", promptprog, WEXITSTATUS(status));
-
-    return 1;
-}
-
-void plugin_init(void)
-{
-    add_options(options);
-    pap_passwd_hook = promptpass;
-}
diff --git a/mdk-stage1/ppp/pppd/ppp.pam b/mdk-stage1/ppp/pppd/ppp.pam
deleted file mode 100644
index 475a4bc88..000000000
--- a/mdk-stage1/ppp/pppd/ppp.pam
+++ /dev/null
@@ -1,6 +0,0 @@
-#%PAM-1.0
-# Information for the PPPD process with the 'login' option.
-auth	required	pam_nologin.so
-auth	required	pam_unix.so
-account	required	pam_unix.so
-session	required	pam_unix.so
\ No newline at end of file
diff --git a/mdk-stage1/ppp/pppd/pppd.8 b/mdk-stage1/ppp/pppd/pppd.8
deleted file mode 100644
index ab091cd83..000000000
--- a/mdk-stage1/ppp/pppd/pppd.8
+++ /dev/null
@@ -1,1591 +0,0 @@
-.\" manual page [] for pppd 2.4
-.\" $Id$
-.\" SH section heading
-.\" SS subsection heading
-.\" LP paragraph
-.\" IP indented paragraph
-.\" TP hanging label
-.TH PPPD 8
-.SH NAME
-pppd \- Point to Point Protocol daemon
-.SH SYNOPSIS
-.B pppd
-[
-.I tty_name
-] [
-.I speed
-] [
-.I options
-]
-.SH DESCRIPTION
-.LP
-The Point-to-Point Protocol (PPP) provides a method for transmitting
-datagrams over serial point-to-point links.  PPP
-is composed of three parts: a method for encapsulating datagrams over
-serial links, an extensible Link Control Protocol (LCP), and
-a family of Network Control Protocols (NCP) for establishing
-and configuring different network-layer protocols.
-.LP
-The encapsulation scheme is provided by driver code in the kernel.
-Pppd provides the basic LCP, authentication support, and an NCP for
-establishing and configuring the Internet Protocol (IP) (called the IP
-Control Protocol, IPCP).
-.SH FREQUENTLY USED OPTIONS
-.TP
-.I <tty_name>
-Communicate over the named device.  The string "/dev/" is prepended if
-necessary.  If no device name is given, or if the name of the terminal
-connected to the standard input is given, pppd will use that terminal,
-and will not fork to put itself in the background.  A value for this
-option from a privileged source cannot be overridden by a
-non-privileged user.
-.TP
-.I <speed>
-Set the baud rate to <speed> (a decimal number).  On systems such as
-4.4BSD and NetBSD, any speed can be specified.  Other systems
-(e.g. SunOS) allow only a limited set of speeds.
-.TP
-.B asyncmap \fI<map>
-Set the async character map to <map>.  This map describes which
-control characters cannot be successfully received over the serial
-line.  Pppd will ask the peer to send these characters as a 2-byte
-escape sequence.  The argument is a 32 bit hex number with each bit
-representing a character to escape.  Bit 0 (00000001) represents the
-character 0x00; bit 31 (80000000) represents the character 0x1f or ^_.
-If multiple \fIasyncmap\fR options are given, the values are ORed
-together.  If no \fIasyncmap\fR option is given, no async character
-map will be negotiated for the receive direction; the peer should then
-escape \fIall\fR control characters.  To escape transmitted
-characters, use the \fIescape\fR option.
-.TP
-.B auth
-Require the peer to authenticate itself before allowing network
-packets to be sent or received.  This option is the default if the
-system has a default route.  If neither this option nor the
-\fInoauth\fR option is specified, pppd will only allow the peer to use
-IP addresses to which the system does not already have a route.
-.TP
-.B call \fIname
-Read options from the file /etc/ppp/peers/\fIname\fR.  This file may
-contain privileged options, such as \fInoauth\fR, even if pppd
-is not being run by root.  The \fIname\fR string may not begin with /
-or include .. as a pathname component.  The format of the options file
-is described below.
-.TP
-.B connect \fIscript
-Use the executable or shell command specified by \fIscript\fR to set
-up the serial line.  This script would typically use the chat(8)
-program to dial the modem and start the remote ppp session.  A value
-for this option from a privileged source cannot be overridden by a
-non-privileged user.
-.TP
-.B crtscts
-Use hardware flow control (i.e. RTS/CTS) to control the flow of
-data on the serial port.  If neither the \fIcrtscts\fR, the
-\fInocrtscts\fR, the \fIcdtrcts\fR nor the \fInocdtrcts\fR option
-is given, the hardware flow control setting for the serial port is
-left unchanged.
-Some serial ports (such as Macintosh serial ports) lack a true
-RTS output. Such serial ports use this mode to implement
-unidirectional flow control. The serial port will
-suspend transmission when requested by the modem (via CTS)
-but will be unable to request the modem stop sending to the
-computer. This mode retains the ability to use DTR as
-a modem control line.
-.TP
-.B defaultroute
-Add a default route to the system routing tables, using the peer as
-the gateway, when IPCP negotiation is successfully completed.
-This entry is removed when the PPP connection is broken.  This option
-is privileged if the \fInodefaultroute\fR option has been specified.
-.TP
-.B disconnect \fIscript
-Run the executable or shell command specified by \fIscript\fR after
-pppd has terminated the link.  This script could, for example, issue
-commands to the modem to cause it to hang up if hardware modem control
-signals were not available.  The disconnect script is not run if the
-modem has already hung up.  A value for this option from a privileged
-source cannot be overridden by a non-privileged user.
-.TP
-.B escape \fIxx,yy,...
-Specifies that certain characters should be escaped on transmission
-(regardless of whether the peer requests them to be escaped with its
-async control character map).  The characters to be escaped are
-specified as a list of hex numbers separated by commas.  Note that
-almost any character can be specified for the \fIescape\fR option,
-unlike the \fIasyncmap\fR option which only allows control characters
-to be specified.  The characters which may not be escaped are those
-with hex values 0x20 - 0x3f or 0x5e.
-.TP
-.B file \fIname
-Read options from file \fIname\fR (the format is described below).
-The file must be readable by the user who has invoked pppd.
-.TP
-.B init \fIscript
-Run the executable or shell command specified by \fIscript\fR to
-initialize the serial line.  This script would typically use the
-chat(8) program to configure the modem to enable auto answer.  A value
-for this option from a privileged source cannot be overridden by a
-non-privileged user.
-.TP
-.B lock
-Specifies that pppd should create a UUCP-style lock file for the
-serial device to ensure exclusive access to the device.
-.TP
-.B mru \fIn
-Set the MRU [Maximum Receive Unit] value to \fIn\fR. Pppd
-will ask the peer to send packets of no more than \fIn\fR bytes.  The
-minimum MRU value is 128.  The default MRU value is 1500.  A value of
-296 is recommended for slow links (40 bytes for TCP/IP header + 256
-bytes of data).  (Note that for IPv6 MRU must be at least 1280)
-.TP
-.B mtu \fIn
-Set the MTU [Maximum Transmit Unit] value to \fIn\fR.  Unless the
-peer requests a smaller value via MRU negotiation, pppd will
-request that the kernel networking code send data packets of no more
-than \fIn\fR bytes through the PPP network interface.  (Note that for 
-IPv6 MTU must be at least 1280)
-.TP
-.B passive
-Enables the "passive" option in the LCP.  With this option, pppd will
-attempt to initiate a connection; if no reply is received from the
-peer, pppd will then just wait passively for a valid LCP packet from
-the peer, instead of exiting, as it would without this option.
-.SH OPTIONS
-.TP
-.I <local_IP_address>\fB:\fI<remote_IP_address>
-Set the local and/or remote interface IP addresses.  Either one may be
-omitted.  The IP addresses can be specified with a host name or in
-decimal dot notation (e.g. 150.234.56.78).  The default local
-address is the (first) IP address of the system (unless the
-\fInoipdefault\fR
-option is given).  The remote address will be obtained from the peer
-if not specified in any option.  Thus, in simple cases, this option is
-not required.  If a local and/or remote IP address is specified with
-this option, pppd
-will not accept a different value from the peer in the IPCP
-negotiation, unless the \fIipcp-accept-local\fR and/or
-\fIipcp-accept-remote\fR options are given, respectively.
-.TP
-.B ipv6 \fI<local_interface_identifier>\fR,\fI<remote_interface_identifier>
-Set the local and/or remote 64-bit interface identifier. Either one may be
-omitted. The identifier must be specified in standard ascii notation of
-IPv6 addresses (e.g. ::dead:beef). If the
-\fIipv6cp-use-ipaddr\fR
-option is given, the local identifier is the local IPv4 address (see above).
-On systems which supports a unique persistent id, such as EUI-48 derived
-from the Ethernet MAC address, \fIipv6cp-use-persistent\fR option can be
-used to replace the \fIipv6 <local>,<remote>\fR option. Otherwise the 
-identifier is randomized.
-.TP
-.B active-filter \fIfilter-expression
-Specifies a packet filter to be applied to data packets to determine
-which packets are to be regarded as link activity, and therefore reset
-the idle timer, or cause the link to be brought up in demand-dialling
-mode.  This option is useful in conjunction with the
-\fBidle\fR option if there are packets being sent or received
-regularly over the link (for example, routing information packets)
-which would otherwise prevent the link from ever appearing to be idle.
-The \fIfilter-expression\fR syntax is as described for tcpdump(1),
-except that qualifiers which are inappropriate for a PPP link, such as
-\fBether\fR and \fBarp\fR, are not permitted.  Generally the filter
-expression should be enclosed in single-quotes to prevent whitespace
-in the expression from being interpreted by the shell. This option
-is currently only available under NetBSD, and then only
-if both the kernel and pppd were compiled with PPP_FILTER defined.
-.TP
-.B allow-ip \fIaddress(es)
-Allow peers to use the given IP address or subnet without
-authenticating themselves.  The parameter is parsed as for each
-element of the list of allowed IP addresses in the secrets files (see
-the AUTHENTICATION section below).
-.TP
-.B bsdcomp \fInr,nt
-Request that the peer compress packets that it sends, using the
-BSD-Compress scheme, with a maximum code size of \fInr\fR bits, and
-agree to compress packets sent to the peer with a maximum code size of
-\fInt\fR bits.  If \fInt\fR is not specified, it defaults to the value
-given for \fInr\fR.  Values in the range 9 to 15 may be used for
-\fInr\fR and \fInt\fR; larger values give better compression but
-consume more kernel memory for compression dictionaries.
-Alternatively, a value of 0 for \fInr\fR or \fInt\fR disables
-compression in the corresponding direction.  Use \fInobsdcomp\fR or
-\fIbsdcomp 0\fR to disable BSD-Compress compression entirely.
-.TP
-.B cdtrcts
-Use a non-standard hardware flow control (i.e. DTR/CTS) to control
-the flow of data on the serial port.  If neither the \fIcrtscts\fR,
-the \fInocrtscts\fR, the \fIcdtrcts\fR nor the \fInocdtrcts\fR
-option is given, the hardware flow control setting for the serial
-port is left unchanged.
-Some serial ports (such as Macintosh serial ports) lack a true
-RTS output. Such serial ports use this mode to implement true
-bi-directional flow control. The sacrifice is that this flow
-control mode does not permit using DTR as a modem control line.
-.TP
-.B chap-interval \fIn
-If this option is given, pppd will rechallenge the peer every \fIn\fR
-seconds.
-.TP
-.B chap-max-challenge \fIn
-Set the maximum number of CHAP challenge transmissions to \fIn\fR
-(default 10).
-.TP
-.B chap-restart \fIn
-Set the CHAP restart interval (retransmission timeout for challenges)
-to \fIn\fR seconds (default 3).
-.TP
-.B connect-delay \fIn
-Wait for up \fIn\fR milliseconds after the connect script finishes for
-a valid PPP packet from the peer.  At the end of this time, or when a
-valid PPP packet is received from the peer, pppd will commence
-negotiation by sending its first LCP packet.  The default value is
-1000 (1 second).  This wait period only applies if the \fBconnect\fR
-or \fBpty\fR option is used.
-.TP
-.B debug
-Enables connection debugging facilities.
-If this option is given, pppd will log the contents of all
-control packets sent or received in a readable form.  The packets are
-logged through syslog with facility \fIdaemon\fR and level
-\fIdebug\fR.  This information can be directed to a file by setting up
-/etc/syslog.conf appropriately (see syslog.conf(5)).
-.TP
-.B default-asyncmap
-Disable asyncmap negotiation, forcing all control characters to be
-escaped for both the transmit and the receive direction.
-.TP
-.B default-mru
-Disable MRU [Maximum Receive Unit] negotiation.  With this option,
-pppd will use the default MRU value of 1500 bytes for both the
-transmit and receive direction.
-.TP
-.B deflate \fInr,nt
-Request that the peer compress packets that it sends, using the
-Deflate scheme, with a maximum window size of \fI2**nr\fR bytes, and
-agree to compress packets sent to the peer with a maximum window size
-of \fI2**nt\fR bytes.  If \fInt\fR is not specified, it defaults to
-the value given for \fInr\fR.  Values in the range 9 to 15 may be used
-for \fInr\fR and \fInt\fR; larger values give better compression but
-consume more kernel memory for compression dictionaries.
-Alternatively, a value of 0 for \fInr\fR or \fInt\fR disables
-compression in the corresponding direction.  Use \fInodeflate\fR or
-\fIdeflate 0\fR to disable Deflate compression entirely.  (Note: pppd
-requests Deflate compression in preference to BSD-Compress if the peer
-can do either.)
-.TP
-.B demand
-Initiate the link only on demand, i.e. when data traffic is present.
-With this option, the remote IP address must be specified by the user
-on the command line or in an options file.  Pppd will initially
-configure the interface and enable it for IP traffic without
-connecting to the peer.  When traffic is available, pppd will
-connect to the peer and perform negotiation, authentication, etc.
-When this is completed, pppd will commence passing data packets
-(i.e., IP packets) across the link.
-
-The \fIdemand\fR option implies the \fIpersist\fR option.  If this
-behaviour is not desired, use the \fInopersist\fR option after the
-\fIdemand\fR option.  The \fIidle\fR and \fIholdoff\fR
-options are also useful in conjuction with the \fIdemand\fR option.
-.TP
-.B domain \fId
-Append the domain name \fId\fR to the local host name for authentication
-purposes.  For example, if gethostname() returns the name porsche, but
-the fully qualified domain name is porsche.Quotron.COM, you could
-specify \fIdomain Quotron.COM\fR.  Pppd would then use the name
-\fIporsche.Quotron.COM\fR for looking up secrets in the secrets file,
-and as the default name to send to the peer when authenticating itself
-to the peer.  This option is privileged.
-.TP
-.B dryrun
-With the \fBdryrun\fR option, pppd will print out all the option
-values which have been set and then exit, after parsing the command
-line and options files and checking the option values, but before
-initiating the link.  The option values are logged at level info, and
-also printed to standard output unless the device on standard output
-is the device that pppd would be using to communicate with the peer.
-.TP
-.B dump
-With the \fBdump\fR option, pppd will print out all the option values
-which have been set.  This option is like the \fBdryrun\fR option
-except that pppd proceeds as normal rather than exiting.
-.TP
-.B endpoint \fI<epdisc>
-Sets the endpoint discriminator sent by the local machine to the peer
-during multilink negotiation to \fI<epdisc>\fR.  The default is to use
-the MAC address of the first ethernet interface on the system, if any,
-otherwise the IPv4 address corresponding to the hostname, if any,
-provided it is not in the multicast or locally-assigned IP address
-ranges, or the localhost address.  The endpoint discriminator can be
-the string \fBnull\fR or of the form \fItype\fR:\fIvalue\fR, where
-type is a decimal number or one of the strings \fBlocal\fR, \fBIP\fR,
-\fBMAC\fR, \fBmagic\fR, or \fBphone\fR.  The value is an IP address in
-dotted-decimal notation for the \fBIP\fR type, or a string of bytes in
-hexadecimal, separated by periods or colons for the other types.  For
-the MAC type, the value may also be the name of an ethernet or similar
-network interface.  This option is currently only available under
-Linux.
-.TP
-.B hide-password
-When logging the contents of PAP packets, this option causes pppd to
-exclude the password string from the log.  This is the default.
-.TP
-.B holdoff \fIn
-Specifies how many seconds to wait before re-initiating the link after
-it terminates.  This option only has any effect if the \fIpersist\fR
-or \fIdemand\fR option is used.  The holdoff period is not applied if
-the link was terminated because it was idle.
-.TP
-.B idle \fIn
-Specifies that pppd should disconnect if the link is idle for \fIn\fR
-seconds.  The link is idle when no data packets (i.e. IP packets) are
-being sent or received.  Note: it is not advisable to use this option
-with the \fIpersist\fR option without the \fIdemand\fR option.
-If the \fBactive-filter\fR
-option is given, data packets which are rejected by the specified
-activity filter also count as the link being idle.
-.TP
-.B ipcp-accept-local
-With this option, pppd will accept the peer's idea of our local IP
-address, even if the local IP address was specified in an option.
-.TP
-.B ipcp-accept-remote
-With this option, pppd will accept the peer's idea of its (remote) IP
-address, even if the remote IP address was specified in an option.
-.TP
-.B ipcp-max-configure \fIn
-Set the maximum number of IPCP configure-request transmissions to
-\fIn\fR (default 10).
-.TP
-.B ipcp-max-failure \fIn
-Set the maximum number of IPCP configure-NAKs returned before starting
-to send configure-Rejects instead to \fIn\fR (default 10).
-.TP
-.B ipcp-max-terminate \fIn
-Set the maximum number of IPCP terminate-request transmissions to
-\fIn\fR (default 3).
-.TP
-.B ipcp-restart \fIn
-Set the IPCP restart interval (retransmission timeout) to \fIn\fR
-seconds (default 3).
-.TP
-.B ipparam \fIstring
-Provides an extra parameter to the ip-up and ip-down scripts.  If this
-option is given, the \fIstring\fR supplied is given as the 6th
-parameter to those scripts.
-.TP
-.B ipv6cp-max-configure \fIn
-Set the maximum number of IPv6CP configure-request transmissions to
-\fIn\fR (default 10).
-.TP
-.B ipv6cp-max-failure \fIn
-Set the maximum number of IPv6CP configure-NAKs returned before starting
-to send configure-Rejects instead to \fIn\fR (default 10).
-.TP
-.B ipv6cp-max-terminate \fIn
-Set the maximum number of IPv6CP terminate-request transmissions to
-\fIn\fR (default 3).
-.TP
-.B ipv6cp-restart \fIn
-Set the IPv6CP restart interval (retransmission timeout) to \fIn\fR
-seconds (default 3).
-.TP
-.B ipx
-Enable the IPXCP and IPX protocols.  This option is presently only
-supported under Linux, and only if your kernel has been configured to
-include IPX support.
-.TP
-.B ipx-network \fIn
-Set the IPX network number in the IPXCP configure request frame to
-\fIn\fR, a hexadecimal number (without a leading 0x).  There is no
-valid default.  If this option is not specified, the network number is
-obtained from the peer.  If the peer does not have the network number,
-the IPX protocol will not be started.
-.TP
-.B ipx-node \fIn\fB:\fIm
-Set the IPX node numbers. The two node numbers are separated from each
-other with a colon character. The first number \fIn\fR is the local
-node number. The second number \fIm\fR is the peer's node number. Each
-node number is a hexadecimal number, at most 10 digits long. The node
-numbers on the ipx-network must be unique. There is no valid
-default. If this option is not specified then the node numbers are
-obtained from the peer.
-.TP
-.B ipx-router-name \fI<string>
-Set the name of the router. This is a string and is sent to the peer
-as information data.
-.TP
-.B ipx-routing \fIn
-Set the routing protocol to be received by this option. More than one
-instance of \fIipx-routing\fR may be specified. The '\fInone\fR'
-option (0) may be specified as the only instance of ipx-routing. The
-values may be \fI0\fR for \fINONE\fR, \fI2\fR for \fIRIP/SAP\fR, and
-\fI4\fR for \fINLSP\fR.
-.TP
-.B ipxcp-accept-local
-Accept the peer's NAK for the node number specified in the ipx-node
-option. If a node number was specified, and non-zero, the default is
-to insist that the value be used. If you include this option then you
-will permit the peer to override the entry of the node number.
-.TP
-.B ipxcp-accept-network
-Accept the peer's NAK for the network number specified in the
-ipx-network option. If a network number was specified, and non-zero, the
-default is to insist that the value be used. If you include this
-option then you will permit the peer to override the entry of the node
-number.
-.TP
-.B ipxcp-accept-remote
-Use the peer's network number specified in the configure request
-frame. If a node number was specified for the peer and this option was
-not specified, the peer will be forced to use the value which you have
-specified.
-.TP
-.B ipxcp-max-configure \fIn
-Set the maximum number of IPXCP configure request frames which the
-system will send to \fIn\fR. The default is 10.
-.TP
-.B ipxcp-max-failure \fIn
-Set the maximum number of IPXCP NAK frames which the local system will
-send before it rejects the options. The default value is 3.
-.TP
-.B ipxcp-max-terminate \fIn
-Set the maximum nuber of IPXCP terminate request frames before the
-local system considers that the peer is not listening to them. The
-default value is 3.
-.TP
-.B kdebug \fIn
-Enable debugging code in the kernel-level PPP driver.  The argument
-values depend on the specific kernel driver, but in general a value of
-1 will enable general kernel debug messages.  (Note that these
-messages are usually only useful for debugging the kernel driver
-itself.)  For the Linux 2.2.x kernel driver, the value is a sum of
-bits: 1 to
-enable general debug messages, 2 to request that the contents of
-received packets be printed, and 4 to request that the contents of
-transmitted packets be printed.  On most systems, messages printed by
-the kernel are logged by syslog(1) to a file as directed in the
-/etc/syslog.conf configuration file.
-.TP
-.B ktune
-Enables pppd to alter kernel settings as appropriate.  Under Linux,
-pppd will enable IP forwarding (i.e. set /proc/sys/net/ipv4/ip_forward
-to 1) if the \fIproxyarp\fR option is used, and will enable the
-dynamic IP address option (i.e. set /proc/sys/net/ipv4/ip_dynaddr to
-1) in demand mode if the local address changes.
-.TP
-.B lcp-echo-failure \fIn
-If this option is given, pppd will presume the peer to be dead
-if \fIn\fR LCP echo-requests are sent without receiving a valid LCP
-echo-reply.  If this happens, pppd will terminate the
-connection.  Use of this option requires a non-zero value for the
-\fIlcp-echo-interval\fR parameter.  This option can be used to enable
-pppd to terminate after the physical connection has been broken
-(e.g., the modem has hung up) in situations where no hardware modem
-control lines are available.
-.TP
-.B lcp-echo-interval \fIn
-If this option is given, pppd will send an LCP echo-request frame to
-the peer every \fIn\fR seconds.  Normally the peer should respond to
-the echo-request by sending an echo-reply.  This option can be used
-with the \fIlcp-echo-failure\fR option to detect that the peer is no
-longer connected.
-.TP
-.B lcp-max-configure \fIn
-Set the maximum number of LCP configure-request transmissions to
-\fIn\fR (default 10).
-.TP
-.B lcp-max-failure \fIn
-Set the maximum number of LCP configure-NAKs returned before starting
-to send configure-Rejects instead to \fIn\fR (default 10).
-.TP
-.B lcp-max-terminate \fIn
-Set the maximum number of LCP terminate-request transmissions to
-\fIn\fR (default 3).
-.TP
-.B lcp-restart \fIn
-Set the LCP restart interval (retransmission timeout) to \fIn\fR
-seconds (default 3).
-.TP
-.B linkname \fIname\fR
-Sets the logical name of the link to \fIname\fR.  Pppd will create a
-file named \fBppp-\fIname\fB.pid\fR in /var/run (or /etc/ppp on some
-systems) containing its process ID.  This can be useful in determining
-which instance of pppd is responsible for the link to a given peer
-system.  This is a privileged option.
-.TP
-.B local
-Don't use the modem control lines.  With this option, pppd will ignore
-the state of the CD (Carrier Detect) signal from the modem and will
-not change the state of the DTR (Data Terminal Ready) signal.
-.TP
-.B logfd \fIn
-Send log messages to file descriptor \fIn\fR.  Pppd will send log
-messages to at most one file or file descriptor (as well as sending
-the log messages to syslog), so this option and the \fBlogfile\fR
-option are mutually exclusive.  The default is for pppd to send log
-messages to stdout (file descriptor 1), unless the serial port is
-already open on stdout.
-.TP
-.B logfile \fIfilename
-Append log messages to the file \fIfilename\fR (as well as sending the
-log messages to syslog).  The file is opened with the privileges of
-the user who invoked pppd, in append mode.
-.TP
-.B login
-Use the system password database for authenticating the peer using
-PAP, and record the user in the system wtmp file.  Note that the peer
-must have an entry in the /etc/ppp/pap-secrets file as well as the
-system password database to be allowed access.
-.TP
-.B maxconnect \fIn
-Terminate the connection when it has been available for network
-traffic for \fIn\fR seconds (i.e. \fIn\fR seconds after the first
-network control protocol comes up).
-.TP
-.B maxfail \fIn
-Terminate after \fIn\fR consecutive failed connection attempts.  A
-value of 0 means no limit.  The default value is 10.
-.TP
-.B modem
-Use the modem control lines.  This option is the default.  With this
-option, pppd will wait for the CD (Carrier Detect) signal from the
-modem to be asserted when opening the serial device (unless a connect
-script is specified), and it will drop the DTR (Data Terminal Ready)
-signal briefly when the connection is terminated and before executing
-the connect script.  On Ultrix, this option implies hardware flow
-control, as for the \fIcrtscts\fR option.
-.TP
-.B mp
-Enables the use of PPP multilink; this is an alias for the `multilink'
-option.  This option is currently only available under Linux.
-.TP
-.B mpshortseq
-Enables the use of short (12-bit) sequence numbers in multilink
-headers, as opposed to 24-bit sequence numbers.  This option is only
-available under Linux, and only has any effect if multilink is
-enabled (see the multilink option).
-.TP
-.B mrru \fIn
-Sets the Maximum Reconstructed Receive Unit to \fIn\fR.  The MRRU is
-the maximum size for a received packet on a multilink bundle, and is
-analogous to the MRU for the individual links.  This option is
-currently only available under Linux, and only has any effect if
-multilink is enabled (see the multilink option).
-.TP
-.B ms-dns \fI<addr>
-If pppd is acting as a server for Microsoft Windows clients, this
-option allows pppd to supply one or two DNS (Domain Name Server)
-addresses to the clients.  The first instance of this option specifies
-the primary DNS address; the second instance (if given) specifies the
-secondary DNS address.  (This option was present in some older
-versions of pppd under the name \fBdns-addr\fR.)
-.TP
-.B ms-wins \fI<addr>
-If pppd is acting as a server for Microsoft Windows or "Samba"
-clients, this option allows pppd to supply one or two WINS (Windows
-Internet Name Services) server addresses to the clients.  The first
-instance of this option specifies the primary WINS address; the second
-instance (if given) specifies the secondary WINS address.
-.TP
-.B multilink
-Enables the use of the PPP multilink protocol.  If the peer also
-supports multilink, then this link can become part of a bundle between
-the local system and the peer.  If there is an existing bundle to the
-peer, pppd will join this link to that bundle, otherwise pppd will
-create a new bundle.  See the MULTILINK section below.  This option is
-currently only available under Linux.
-.TP
-.B name \fIname
-Set the name of the local system for authentication purposes to
-\fIname\fR.  This is a privileged option.  With this option, pppd will
-use lines in the secrets files which have \fIname\fR as the second
-field when looking for a secret to use in authenticating the peer.  In
-addition, unless overridden with the \fIuser\fR option, \fIname\fR
-will be used as the name to send to the peer when authenticating the
-local system to the peer.  (Note that pppd does not append the domain
-name to \fIname\fR.)
-.TP
-.B netmask \fIn
-Set the interface netmask to \fIn\fR, a 32 bit netmask in "decimal dot"
-notation (e.g. 255.255.255.0).  If this option is given, the value
-specified is ORed with the default netmask.  The default netmask is
-chosen based on the negotiated remote IP address; it is the
-appropriate network mask for the class of the remote IP address, ORed
-with the netmasks for any non point-to-point network interfaces in the
-system which are on the same network.  (Note: on some platforms, pppd
-will always use 255.255.255.255 for the netmask, if that is the only
-appropriate value for a point-to-point interface.)
-.TP
-.B noaccomp
-Disable Address/Control compression in both directions (send and
-receive).
-.TP
-.B noauth
-Do not require the peer to authenticate itself.  This option is
-privileged.
-.TP
-.B nobsdcomp
-Disables BSD-Compress compression; \fBpppd\fR will not request or
-agree to compress packets using the BSD-Compress scheme.
-.TP
-.B noccp
-Disable CCP (Compression Control Protocol) negotiation.  This option
-should only be required if the peer is buggy and gets confused by
-requests from pppd for CCP negotiation.
-.TP
-.B nocrtscts
-Disable hardware flow control (i.e. RTS/CTS) on the serial port.
-If neither the \fIcrtscts\fR nor the \fInocrtscts\fR nor the
-\fIcdtrcts\fR nor the \fInocdtrcts\fR option is given, the hardware
-flow control setting for the serial port is left unchanged.
-.TP
-.B nocdtrcts
-This option is a synonym for \fInocrtscts\fR. Either of these options will
-disable both forms of hardware flow control.
-.TP
-.B nodefaultroute
-Disable the \fIdefaultroute\fR option.  The system administrator who
-wishes to prevent users from creating default routes with pppd
-can do so by placing this option in the /etc/ppp/options file.
-.TP
-.B nodeflate
-Disables Deflate compression; pppd will not request or agree to
-compress packets using the Deflate scheme.
-.TP
-.B nodetach
-Don't detach from the controlling terminal.  Without this option, if a
-serial device other than the terminal on the standard input is
-specified, pppd will fork to become a background process.
-.TP
-.B noendpoint
-Disables pppd from sending an endpoint discriminator to the peer or
-accepting one from the peer (see the MULTILINK section below).  This
-option should only be required if the peer is buggy.
-.TP
-.B noip
-Disable IPCP negotiation and IP communication.  This option should
-only be required if the peer is buggy and gets confused by requests
-from pppd for IPCP negotiation.
-.TP
-.B noipv6
-Disable IPv6CP negotiation and IPv6 communication. This option should
-only be required if the peer is buggy and gets confused by requests
-from pppd for IPv6CP negotiation.
-.TP
-.B noipdefault
-Disables the default behaviour when no local IP address is specified,
-which is to determine (if possible) the local IP address from the
-hostname.  With this option, the peer will have to supply the local IP
-address during IPCP negotiation (unless it specified explicitly on the
-command line or in an options file).
-.TP
-.B noipx
-Disable the IPXCP and IPX protocols.  This option should only be
-required if the peer is buggy and gets confused by requests from pppd
-for IPXCP negotiation.
-.TP
-.B noktune
-Opposite of the \fIktune\fR option; disables pppd from changing system
-settings.
-.TP
-.B nolog
-Do not send log messages to a file or file descriptor.  This option
-cancels the \fBlogfd\fR and \fBlogfile\fR options.
-.TP
-.B nomagic
-Disable magic number negotiation.  With this option, pppd cannot
-detect a looped-back line.  This option should only be needed if the
-peer is buggy.
-.TP
-.B nomp
-Disables the use of PPP multilink.  This option is currently only
-available under Linux.
-.TP
-.B nompshortseq
-Disables the use of short (12-bit) sequence numbers in the PPP
-multilink protocol, forcing the use of 24-bit sequence numbers.  This
-option is currently only available under Linux, and only has any
-effect if multilink is enabled.
-.TP
-.B nomultilink
-Disables the use of PPP multilink.  This option is currently only
-available under Linux.
-.TP
-.B nopcomp
-Disable protocol field compression negotiation in both the receive and
-the transmit direction.
-.TP
-.B nopersist
-Exit once a connection has been made and terminated.  This is the
-default unless the \fIpersist\fR or \fIdemand\fR option has been
-specified.
-.TP
-.B nopredictor1
-Do not accept or agree to Predictor-1 compression.
-.TP
-.B noproxyarp
-Disable the \fIproxyarp\fR option.  The system administrator who
-wishes to prevent users from creating proxy ARP entries with pppd can
-do so by placing this option in the /etc/ppp/options file.
-.TP
-.B notty
-Normally, pppd requires a terminal device.  With this option, pppd
-will allocate itself a pseudo-tty master/slave pair and use the slave
-as its terminal device.  Pppd will create a child process to act as a
-`character shunt' to transfer characters between the pseudo-tty master
-and its standard input and output.  Thus pppd will transmit characters
-on its standard output and receive characters on its standard input
-even if they are not terminal devices.  This option increases the
-latency and CPU overhead of transferring data over the ppp interface
-as all of the characters sent and received must flow through the
-character shunt process.  An explicit device name may not be given if
-this option is used.
-.TP
-.B novj
-Disable Van Jacobson style TCP/IP header compression in both the
-transmit and the receive direction.
-.TP
-.B novjccomp
-Disable the connection-ID compression option in Van Jacobson style
-TCP/IP header compression.  With this option, pppd will not omit the
-connection-ID byte from Van Jacobson compressed TCP/IP headers, nor
-ask the peer to do so.
-.TP
-.B papcrypt
-Indicates that all secrets in the /etc/ppp/pap-secrets file which are
-used for checking the identity of the peer are encrypted, and thus
-pppd should not accept a password which, before encryption, is
-identical to the secret from the /etc/ppp/pap-secrets file.
-.TP
-.B pap-max-authreq \fIn
-Set the maximum number of PAP authenticate-request transmissions to
-\fIn\fR (default 10).
-.TP
-.B pap-restart \fIn
-Set the PAP restart interval (retransmission timeout) to \fIn\fR
-seconds (default 3).
-.TP
-.B pap-timeout \fIn
-Set the maximum time that pppd will wait for the peer to authenticate
-itself with PAP to \fIn\fR seconds (0 means no limit).
-.TP
-.B pass-filter \fIfilter-expression
-Specifies a packet filter to applied to data packets being sent or
-received to determine which packets should be allowed to pass.
-Packets which are rejected by the filter are silently discarded.  This
-option can be used to prevent specific network daemons (such as
-routed) using up link bandwidth, or to provide a basic firewall
-capability.
-The \fIfilter-expression\fR syntax is as described for tcpdump(1),
-except that qualifiers which are inappropriate for a PPP link, such as
-\fBether\fR and \fBarp\fR, are not permitted.  Generally the filter
-expression should be enclosed in single-quotes to prevent whitespace
-in the expression from being interpreted by the shell.  Note that it
-is possible to apply different constraints to incoming and outgoing
-packets using the \fBinbound\fR and \fBoutbound\fR qualifiers. This
-option is currently only available under NetBSD, and then only if both
-the kernel and pppd were compiled with PPP_FILTER defined.
-.TP
-.B persist
-Do not exit after a connection is terminated; instead try to reopen
-the connection.
-.TP
-.B plugin \fIfilename
-Load the shared library object file \fIfilename\fR as a plugin.  This
-is a privileged option.
-.TP
-.B predictor1
-Request that the peer compress frames that it sends using Predictor-1
-compression, and agree to compress transmitted frames with Predictor-1
-if requested.  This option has no effect unless the kernel driver
-supports Predictor-1 compression.
-.TP
-.B privgroup \fIgroup-name
-Allows members of group \fIgroup-name\fR to use privileged options.
-This is a privileged option.  Use of this option requires care as
-there is no guarantee that members of \fIgroup-name\fR cannot use pppd
-to become root themselves.  Consider it equivalent to putting the
-members of \fIgroup-name\fR in the kmem or disk group.
-.TP
-.B proxyarp
-Add an entry to this system's ARP [Address Resolution Protocol] table
-with the IP address of the peer and the Ethernet address of this
-system.  This will have the effect of making the peer appear to other
-systems to be on the local ethernet.
-.TP
-.B pty \fIscript
-Specifies that the command \fIscript\fR is to be used to communicate
-rather than a specific terminal device.  Pppd will allocate itself a
-pseudo-tty master/slave pair and use the slave as its terminal
-device.  The \fIscript\fR will be run in a child process with the
-pseudo-tty master as its standard input and output.  An explicit
-device name may not be given if this option is used.  (Note: if the
-\fIrecord\fR option is used in conjuction with the \fIpty\fR option,
-the child process will have pipes on its standard input and output.)
-.TP
-.B receive-all
-With this option, pppd will accept all control characters from the
-peer, including those marked in the receive asyncmap.  Without this
-option, pppd will discard those characters as specified in RFC1662.
-This option should only be needed if the peer is buggy.
-.TP
-.B record \fIfilename
-Specifies that pppd should record all characters sent and received to
-a file named \fIfilename\fR.  This file is opened in append mode,
-using the user's user-ID and permissions.  This option is implemented
-using a pseudo-tty and a process to transfer characters between the
-pseudo-tty and the real serial device, so it will increase the latency
-and CPU overhead of transferring data over the ppp interface.  The
-characters are stored in a tagged format with timestamps, which can be
-displayed in readable form using the pppdump(8) program.
-.TP
-.B remotename \fIname
-Set the assumed name of the remote system for authentication purposes
-to \fIname\fR.
-.TP
-.B refuse-chap
-With this option, pppd will not agree to authenticate itself to the
-peer using CHAP.
-.TP
-.B refuse-pap
-With this option, pppd will not agree to authenticate itself to the
-peer using PAP.
-.TP
-.B require-chap
-Require the peer to authenticate itself using CHAP [Challenge
-Handshake Authentication Protocol] authentication.
-.TP
-.B require-pap
-Require the peer to authenticate itself using PAP [Password
-Authentication Protocol] authentication.
-.TP
-.B show-password
-When logging the contents of PAP packets, this option causes pppd to
-show the password string in the log message.
-.TP
-.B silent
-With this option, pppd will not transmit LCP packets to initiate a
-connection until a valid LCP packet is received from the peer (as for
-the `passive' option with ancient versions of pppd).
-.TP
-.B sync
-Use synchronous HDLC serial encoding instead of asynchronous.
-The device used by pppd with this option must have sync support.
-Currently supports Microgate SyncLink adapters
-under Linux and FreeBSD 2.2.8 and later.
-.TP
-.B updetach
-With this option, pppd will detach from its controlling terminal once
-it has successfully established the ppp connection (to the point where
-the first network control protocol, usually the IP control protocol,
-has come up).
-.TP
-.B usehostname
-Enforce the use of the hostname (with domain name appended, if given)
-as the name of the local system for authentication purposes (overrides
-the \fIname\fR option).  This option is not normally needed since the
-\fIname\fR option is privileged.
-.TP
-.B usepeerdns
-Ask the peer for up to 2 DNS server addresses.  The addresses supplied
-by the peer (if any) are passed to the /etc/ppp/ip-up script in the
-environment variables DNS1 and DNS2.  In addition, pppd will create an
-/etc/ppp/resolv.conf file containing one or two nameserver lines with
-the address(es) supplied by the peer.
-.TP
-.B user \fIname
-Sets the name used for authenticating the local system to the peer to
-\fIname\fR.
-.TP
-.B vj-max-slots \fIn
-Sets the number of connection slots to be used by the Van Jacobson
-TCP/IP header compression and decompression code to \fIn\fR, which
-must be between 2 and 16 (inclusive).
-.TP
-.B welcome \fIscript
-Run the executable or shell command specified by \fIscript\fR before
-initiating PPP negotiation, after the connect script (if any) has
-completed.  A value for this option from a privileged source cannot be
-overridden by a non-privileged user.
-.TP
-.B xonxoff
-Use software flow control (i.e. XON/XOFF) to control the flow of data on
-the serial port.
-.SH OPTIONS FILES
-Options can be taken from files as well as the command line.  Pppd
-reads options from the files /etc/ppp/options, ~/.ppprc and
-/etc/ppp/options.\fIttyname\fR (in that order) before processing the
-options on the command line.  (In fact, the command-line options are
-scanned to find the terminal name before the options.\fIttyname\fR
-file is read.)  In forming the name of the options.\fIttyname\fR file,
-the initial /dev/ is removed from the terminal name, and any remaining
-/ characters are replaced with dots.
-.PP
-An options file is parsed into a series of words, delimited by
-whitespace.  Whitespace can be included in a word by enclosing the
-word in double-quotes (").  A backslash (\\) quotes the following character.
-A hash (#) starts a comment, which continues until the end of the
-line.  There is no restriction on using the \fIfile\fR or \fIcall\fR
-options within an options file.
-.SH SECURITY
-.I pppd
-provides system administrators with sufficient access control that PPP
-access to a server machine can be provided to legitimate users without
-fear of compromising the security of the server or the network it's
-on.  This control is provided through restrictions on which IP
-addresses the peer may use, based on its authenticated identity (if
-any), and through restrictions on which options a non-privileged user
-may use.  Several of pppd's options are privileged, in particular
-those which permit potentially insecure configurations; these options
-are only accepted in files which are under the control of the system
-administrator, or if pppd is being run by root.
-.PP
-The default behaviour of pppd is to allow an unauthenticated peer to
-use a given IP address only if the system does not already have a
-route to that IP address.  For example, a system with a
-permanent connection to the wider internet will normally have a
-default route, and thus all peers will have to authenticate themselves
-in order to set up a connection.  On such a system, the \fIauth\fR
-option is the default.  On the other hand, a system where the
-PPP link is the only connection to the internet will not normally have
-a default route, so the peer will be able to use almost any IP address
-without authenticating itself.
-.PP
-As indicated above, some security-sensitive options are privileged,
-which means that they may not be used by an ordinary non-privileged
-user running a setuid-root pppd, either on the command line, in the
-user's ~/.ppprc file, or in an options file read using the \fIfile\fR
-option.  Privileged options may be used in /etc/ppp/options file or in
-an options file read using the \fIcall\fR option.  If pppd is being
-run by the root user, privileged options can be used without
-restriction.
-.PP
-When opening the device, pppd uses either the invoking user's user ID
-or the root UID (that is, 0), depending on whether the device name was
-specified by the user or the system administrator.  If the device name
-comes from a privileged source, that is, /etc/ppp/options or an
-options file read using the \fIcall\fR option, pppd uses full root
-privileges when opening the device.  Thus, by creating an appropriate
-file under /etc/ppp/peers, the system administrator can allow users to
-establish a ppp connection via a device which they would not normally
-have permission to access.  Otherwise pppd uses the invoking user's
-real UID when opening the device.
-.SH AUTHENTICATION
-Authentication is the process whereby one peer convinces the other of
-its identity.  This involves the first peer sending its name to the
-other, together with some kind of secret information which could only
-come from the genuine authorized user of that name.  In such an
-exchange, we will call the first peer the "client" and the other the
-"server".  The client has a name by which it identifies itself to the
-server, and the server also has a name by which it identifies itself
-to the client.  Generally the genuine client shares some secret (or
-password) with the server, and authenticates itself by proving that it
-knows that secret.  Very often, the names used for authentication
-correspond to the internet hostnames of the peers, but this is not
-essential.
-.LP
-At present, pppd supports two authentication protocols: the Password
-Authentication Protocol (PAP) and the Challenge Handshake
-Authentication Protocol (CHAP).  PAP involves the client sending its
-name and a cleartext password to the server to authenticate itself.
-In contrast, the server initiates the CHAP authentication exchange by
-sending a challenge to the client (the challenge packet includes the
-server's name).  The client must respond with a response which
-includes its name plus a hash value derived from the shared secret and
-the challenge, in order to prove that it knows the secret.
-.LP
-The PPP protocol, being symmetrical, allows both peers to require the
-other to authenticate itself.  In that case, two separate and
-independent authentication exchanges will occur.  The two exchanges
-could use different authentication protocols, and in principle,
-different names could be used in the two exchanges.
-.LP
-The default behaviour of pppd is to agree to authenticate if
-requested, and to not require authentication from the peer.  However,
-pppd will not agree to authenticate itself with a particular protocol
-if it has no secrets which could be used to do so.
-.LP
-Pppd stores secrets for use in authentication in secrets
-files (/etc/ppp/pap-secrets for PAP, /etc/ppp/chap-secrets for CHAP).
-Both secrets files have the same format.  The secrets files can
-contain secrets for pppd to use in authenticating itself to other
-systems, as well as secrets for pppd to use when authenticating other
-systems to itself.
-.LP
-Each line in a secrets file contains one secret.  A given secret is
-specific to a particular combination of client and server - it can
-only be used by that client to authenticate itself to that server.
-Thus each line in a secrets file has at least 3 fields: the name of
-the client, the name of the server, and the secret.  These fields may
-be followed by a list of the IP addresses that the specified client
-may use when connecting to the specified server.
-.LP
-A secrets file is parsed into words as for a options file, so the
-client name, server name and secrets fields must each be one word,
-with any embedded spaces or other special characters quoted or
-escaped.  Note that case is significant in the client and server names
-and in the secret.
-.LP
-If the secret starts with an `@', what follows is assumed to be the
-name of a file from which to read the secret.  A "*" as the client or
-server name matches any name.  When selecting a secret, pppd takes the
-best match, i.e.  the match with the fewest wildcards.
-.LP
-Any following words on the same line are taken to be a list of
-acceptable IP addresses for that client.  If there are only 3 words on
-the line, or if the first word is "-", then all IP addresses are
-disallowed.  To allow any address, use "*".  A word starting with "!"
-indicates that the specified address is \fInot\fR acceptable.  An
-address may be followed by "/" and a number \fIn\fR, to indicate a
-whole subnet, i.e. all addresses which have the same value in the most
-significant \fIn\fR bits.  In this form, the address may be followed
-by a plus sign ("+") to indicate that one address from the subnet is
-authorized, based on the ppp network interface unit number in use.
-In this case, the host part of the address will be set to the unit
-number plus one.
-.LP
-Thus a secrets file contains both secrets for use in authenticating
-other hosts, plus secrets which we use for authenticating ourselves to
-others.  When pppd is authenticating the peer (checking the peer's
-identity), it chooses a secret with the peer's name in the first
-field and the name of the local system in the second field.  The
-name of the local system defaults to the hostname, with the domain
-name appended if the \fIdomain\fR option is used.  This default can be
-overridden with the \fIname\fR option, except when the
-\fIusehostname\fR option is used.
-.LP
-When pppd is choosing a secret to use in authenticating itself to the
-peer, it first determines what name it is going to use to identify
-itself to the peer.  This name can be specified by the user with the
-\fIuser\fR option.  If this option is not used, the name defaults to
-the name of the local system, determined as described in the previous
-paragraph.  Then pppd looks for a secret with this name in the first
-field and the peer's name in the second field.  Pppd will know the
-name of the peer if CHAP authentication is being used, because the
-peer will have sent it in the challenge packet.  However, if PAP is being
-used, pppd will have to determine the peer's name from the options
-specified by the user.  The user can specify the peer's name directly
-with the \fIremotename\fR option.  Otherwise, if the remote IP address
-was specified by a name (rather than in numeric form), that name will
-be used as the peer's name.  Failing that, pppd will use the null
-string as the peer's name.
-.LP
-When authenticating the peer with PAP, the supplied password is first
-compared with the secret from the secrets file.  If the password
-doesn't match the secret, the password is encrypted using crypt() and
-checked against the secret again.  Thus secrets for authenticating the
-peer can be stored in encrypted form if desired.  If the
-\fIpapcrypt\fR option is given, the first (unencrypted) comparison is
-omitted, for better security.
-.LP
-Furthermore, if the \fIlogin\fR option was specified, the username and
-password are also checked against the system password database.  Thus,
-the system administrator can set up the pap-secrets file to allow PPP
-access only to certain users, and to restrict the set of IP addresses
-that each user can use.  Typically, when using the \fIlogin\fR option,
-the secret in /etc/ppp/pap-secrets would be "", which will match any
-password supplied by the peer.  This avoids the need to have the same
-secret in two places.
-.LP
-Authentication must be satisfactorily completed before IPCP (or any
-other Network Control Protocol) can be started.  If the peer is
-required to authenticate itself, and fails to do so, pppd will
-terminated the link (by closing LCP).  If IPCP negotiates an
-unacceptable IP address for the remote host, IPCP will be closed.  IP
-packets can only be sent or received when IPCP is open.
-.LP
-In some cases it is desirable to allow some hosts which can't
-authenticate themselves to connect and use one of a restricted set of
-IP addresses, even when the local host generally requires
-authentication.  If the peer refuses to authenticate itself when
-requested, pppd takes that as equivalent to authenticating with PAP
-using the empty string for the username and password.  Thus, by adding
-a line to the pap-secrets file which specifies the empty string for
-the client and password, it is possible to allow restricted access to
-hosts which refuse to authenticate themselves.
-.SH ROUTING
-.LP
-When IPCP negotiation is completed successfully, pppd will inform the
-kernel of the local and remote IP addresses for the ppp interface.
-This is sufficient to create a host route to the remote end of the
-link, which will enable the peers to exchange IP packets.
-Communication with other machines generally requires further
-modification to routing tables and/or ARP (Address Resolution
-Protocol) tables.  In most cases the \fIdefaultroute\fR and/or
-\fIproxyarp\fR options are sufficient for this, but in some cases
-further intervention is required.  The /etc/ppp/ip-up script can be
-used for this.
-.LP
-Sometimes it is desirable to add a default route through the remote
-host, as in the case of a machine whose only connection to the
-Internet is through the ppp interface.  The \fIdefaultroute\fR option
-causes pppd to create such a default route when IPCP comes up, and
-delete it when the link is terminated.
-.LP
-In some cases it is desirable to use proxy ARP, for example on a
-server machine connected to a LAN, in order to allow other hosts to
-communicate with the remote host.  The \fIproxyarp\fR option causes
-pppd to look for a network interface on the same subnet as the remote
-host (an interface supporting broadcast and ARP, which is up and not a
-point-to-point or loopback interface).  If found, pppd creates a
-permanent, published ARP entry with the IP address of the remote host
-and the hardware address of the network interface found.
-.LP
-When the \fIdemand\fR option is used, the interface IP addresses have
-already been set at the point when IPCP comes up.  If pppd has not
-been able to negotiate the same addresses that it used to configure
-the interface (for example when the peer is an ISP that uses dynamic
-IP address assignment), pppd has to change the interface IP addresses
-to the negotiated addresses.  This may disrupt existing connections,
-and the use of demand dialling with peers that do dynamic IP address
-assignment is not recommended.
-.SH MULTILINK
-Multilink PPP provides the capability to combine two or more PPP links
-between a pair of machines into a single `bundle', which appears as a
-single virtual PPP link which has the combined bandwidth of the
-individual links.  Currently, multilink PPP is only supported under
-Linux.
-.LP
-Pppd detects that the link it is controlling is connected to the same
-peer as another link using the peer's endpoint discriminator and the
-authenticated identity of the peer (if it authenticates itself).  The
-endpoint discriminator is a block of data which is hopefully unique
-for each peer.  Several types of data can be used, including
-locally-assigned strings of bytes, IP addresses, MAC addresses,
-randomly strings of bytes, or E-164 phone numbers.  The endpoint
-discriminator sent to the peer by pppd can be set using the endpoint
-option.
-.LP
-In circumstances the peer may send no endpoint discriminator or a
-non-unique value.  The optional bundle option adds an extra string
-which is added to the peer's endpoint discriminator and authenticated
-identity when matching up links to be joined together in a bundle.
-The bundle option can also be used to allow the establishment of
-multiple bundles between the local system and the peer.  Pppd uses a
-TDB database in /var/run/pppd.tdb to match up links.
-.LP
-Assuming that multilink is enabled and the peer is willing to
-negotiate multilink, then when pppd is invoked to bring up the first
-link to the peer, it will detect that no other link is connected to
-the peer and create a new bundle, that is, another ppp network
-interface unit.  When another pppd is invoked to bring up another link
-to the peer, it will detect the existing bundle and join its link to
-it.  Currently, if the first pppd terminates (for example, because of
-a hangup or a received signal) the bundle is destroyed.
-.SH EXAMPLES
-.LP
-The following examples assume that the /etc/ppp/options file contains
-the \fIauth\fR option (as in the default /etc/ppp/options file in the
-ppp distribution).
-.LP
-Probably the most common use of pppd is to dial out to an ISP.  This
-can be done with a command such as
-.IP
-pppd call isp
-.LP
-where the /etc/ppp/peers/isp file is set up by the system
-administrator to contain something like this:
-.IP
-ttyS0 19200 crtscts
-.br
-connect '/usr/sbin/chat -v -f /etc/ppp/chat-isp'
-.br
-noauth
-.LP
-In this example, we are using chat to dial the ISP's modem and go
-through any logon sequence required.  The /etc/ppp/chat-isp file
-contains the script used by chat; it could for example contain
-something like this:
-.IP
-ABORT "NO CARRIER"
-.br
-ABORT "NO DIALTONE"
-.br
-ABORT "ERROR"
-.br
-ABORT "NO ANSWER"
-.br
-ABORT "BUSY"
-.br
-ABORT "Username/Password Incorrect"
-.br
-"" "at"
-.br
-OK "at&d0&c1"
-.br
-OK "atdt2468135"
-.br
-"name:" "^Umyuserid"
-.br
-"word:" "\\qmypassword"
-.br
-"ispts" "\\q^Uppp"
-.br
-"~-^Uppp-~"
-.LP
-See the chat(8) man page for details of chat scripts.
-.LP
-Pppd can also be used to provide a dial-in ppp service for users.  If
-the users already have login accounts, the simplest way to set up the
-ppp service is to let the users log in to their accounts and run pppd
-(installed setuid-root) with a command such as
-.IP
-pppd proxyarp
-.LP
-To allow a user to use the PPP facilities, you need to allocate an IP
-address for that user's machine and create an entry in
-/etc/ppp/pap-secrets or /etc/ppp/chap-secrets (depending on which
-authentication method the PPP implementation on the user's machine
-supports), so that the user's
-machine can authenticate itself.  For example, if Joe has a machine
-called "joespc" which is to be allowed to dial in to the machine
-called "server" and use the IP address joespc.my.net, you would add an
-entry like this to /etc/ppp/pap-secrets or /etc/ppp/chap-secrets:
-.IP
-joespc	server	"joe's secret"	joespc.my.net
-.LP
-Alternatively, you can create a username called (for example) "ppp",
-whose login shell is pppd and whose home directory is /etc/ppp.
-Options to be used when pppd is run this way can be put in
-/etc/ppp/.ppprc.
-.LP
-If your serial connection is any more complicated than a piece of
-wire, you may need to arrange for some control characters to be
-escaped.  In particular, it is often useful to escape XON (^Q) and
-XOFF (^S), using \fIasyncmap a0000\fR.  If the path includes a telnet,
-you probably should escape ^] as well (\fIasyncmap 200a0000\fR).  If
-the path includes an rlogin, you will need to use the \fIescape ff\fR
-option on the end which is running the rlogin client, since many
-rlogin implementations are not transparent; they will remove the
-sequence [0xff, 0xff, 0x73, 0x73, followed by any 8 bytes] from the
-stream.
-.SH DIAGNOSTICS
-.LP
-Messages are sent to the syslog daemon using facility LOG_DAEMON.
-(This can be overriden by recompiling pppd with the macro
-LOG_PPP defined as the desired facility.)  In order to see the error
-and debug messages, you will need to edit your /etc/syslog.conf file
-to direct the messages to the desired output device or file.
-.LP
-The \fIdebug\fR option causes the contents of all control packets sent
-or received to be logged, that is, all LCP, PAP, CHAP or IPCP packets.
-This can be useful if the PPP negotiation does not succeed or if
-authentication fails.
-If debugging is enabled at compile time, the \fIdebug\fR option also
-causes other debugging messages to be logged.
-.LP
-Debugging can also be enabled or disabled by sending a SIGUSR1 signal
-to the pppd process.  This signal acts as a toggle.
-.SH EXIT STATUS
-The exit status of pppd is set to indicate whether any error was
-detected, or the reason for the link being terminated.  The values
-used are:
-.TP
-.B 0
-Pppd has detached, or otherwise the connection was successfully
-established and terminated at the peer's request.
-.TP
-.B 1
-An immediately fatal error of some kind occurred, such as an essential
-system call failing, or running out of virtual memory.
-.TP
-.B 2
-An error was detected in processing the options given, such as two
-mutually exclusive options being used.
-.TP
-.B 3
-Pppd is not setuid-root and the invoking user is not root.
-.TP
-.B 4
-The kernel does not support PPP, for example, the PPP kernel driver is
-not included or cannot be loaded.
-.TP
-.B 5
-Pppd terminated because it was sent a SIGINT, SIGTERM or SIGHUP
-signal.
-.TP
-.B 6
-The serial port could not be locked.
-.TP
-.B 7
-The serial port could not be opened.
-.TP
-.B 8
-The connect script failed (returned a non-zero exit status).
-.TP
-.B 9
-The command specified as the argument to the \fIpty\fR option could
-not be run.
-.TP
-.B 10
-The PPP negotiation failed, that is, it didn't reach the point where
-at least one network protocol (e.g. IP) was running.
-.TP
-.B 11
-The peer system failed (or refused) to authenticate itself.
-.TP
-.B 12
-The link was established successfully and terminated because it was
-idle.
-.TP
-.B 13
-The link was established successfully and terminated because the
-connect time limit was reached.
-.TP
-.B 14
-Callback was negotiated and an incoming call should arrive shortly.
-.TP
-.B 15
-The link was terminated because the peer is not responding to echo
-requests.
-.TP
-.B 16
-The link was terminated by the modem hanging up.
-.TP
-.B 17
-The PPP negotiation failed because serial loopback was detected.
-.TP
-.B 18
-The init script failed (returned a non-zero exit status).
-.TP
-.B 19
-We failed to authenticate ourselves to the peer.
-.SH SCRIPTS
-Pppd invokes scripts at various stages in its processing which can be
-used to perform site-specific ancillary processing.  These scripts are
-usually shell scripts, but could be executable code files instead.
-Pppd does not wait for the scripts to finish.  The scripts are
-executed as root (with the real and effective user-id set to 0), so
-that they can do things such as update routing tables or run
-privileged daemons.  Be careful that the contents of these scripts do
-not compromise your system's security.  Pppd runs the scripts with
-standard input, output and error redirected to /dev/null, and with an
-environment that is empty except for some environment variables that
-give information about the link.  The environment variables that pppd
-sets are:
-.TP
-.B DEVICE
-The name of the serial tty device being used.
-.TP
-.B IFNAME
-The name of the network interface being used.
-.TP
-.B IPLOCAL
-The IP address for the local end of the link.  This is only set when
-IPCP has come up.
-.TP
-.B IPREMOTE
-The IP address for the remote end of the link.  This is only set when
-IPCP has come up.
-.TP
-.B PEERNAME
-The authenticated name of the peer.  This is only set if the peer
-authenticates itself.
-.TP
-.B SPEED
-The baud rate of the tty device.
-.TP
-.B ORIG_UID
-The real user-id of the user who invoked pppd.
-.TP
-.B PPPLOGNAME
-The username of the real user-id that invoked pppd. This is always set.
-.P
-For the ip-down and auth-down scripts, pppd also sets the following
-variables giving statistics for the connection:
-.TP
-.B CONNECT_TIME
-The number of seconds from when the PPP negotiation started until the
-connection was terminated.
-.TP
-.B BYTES_SENT
-The number of bytes sent (at the level of the serial port) during the
-connection.
-.TP
-.B BYTES_RCVD
-The number of bytes received (at the level of the serial port) during
-the connection.
-.TP
-.B LINKNAME
-The logical name of the link, set with the \fIlinkname\fR option.
-.P
-Pppd invokes the following scripts, if they exist.  It is not an error
-if they don't exist.
-.TP
-.B /etc/ppp/auth-up
-A program or script which is executed after the remote system
-successfully authenticates itself.  It is executed with the parameters
-.IP
-\fIinterface-name peer-name user-name tty-device speed\fR
-.IP
-Note that this script is not executed if the peer doesn't authenticate
-itself, for example when the \fInoauth\fR option is used.
-.TP
-.B /etc/ppp/auth-down
-A program or script which is executed when the link goes down, if
-/etc/ppp/auth-up was previously executed.  It is executed in the same
-manner with the same parameters as /etc/ppp/auth-up.
-.TP
-.B /etc/ppp/ip-up
-A program or script which is executed when the link is available for
-sending and receiving IP packets (that is, IPCP has come up).  It is
-executed with the parameters
-.IP
-\fIinterface-name tty-device speed local-IP-address
-remote-IP-address ipparam\fR
-.TP
-.B /etc/ppp/ip-down
-A program or script which is executed when the link is no longer
-available for sending and receiving IP packets.  This script can be
-used for undoing the effects of the /etc/ppp/ip-up script.  It is
-invoked in the same manner and with the same parameters as the ip-up
-script.
-.TP
-.B /etc/ppp/ipv6-up
-Like /etc/ppp/ip-up, except that it is executed when the link is available 
-for sending and receiving IPv6 packets. It is executed with the parameters
-.IP
-\fIinterface-name tty-device speed local-link-local-address
-remote-link-local-address ipparam\fR
-.TP
-.B /etc/ppp/ipv6-down
-Similar to /etc/ppp/ip-down, but it is executed when IPv6 packets can no
-longer be transmitted on the link. It is executed with the same parameters 
-as the ipv6-up script.
-.TP
-.B /etc/ppp/ipx-up
-A program or script which is executed when the link is available for
-sending and receiving IPX packets (that is, IPXCP has come up).  It is
-executed with the parameters
-.IP
-\fIinterface-name tty-device speed network-number local-IPX-node-address
-remote-IPX-node-address local-IPX-routing-protocol remote-IPX-routing-protocol
-local-IPX-router-name remote-IPX-router-name ipparam pppd-pid\fR 
-.IP
-The local-IPX-routing-protocol and remote-IPX-routing-protocol field
-may be one of the following:
-.IP
-NONE      to indicate that there is no routing protocol
-.br
-RIP       to indicate that RIP/SAP should be used
-.br
-NLSP      to indicate that Novell NLSP should be used
-.br
-RIP NLSP  to indicate that both RIP/SAP and NLSP should be used
-.TP
-.B /etc/ppp/ipx-down
-A program or script which is executed when the link is no longer
-available for sending and receiving IPX packets.  This script can be
-used for undoing the effects of the /etc/ppp/ipx-up script.  It is
-invoked in the same manner and with the same parameters as the ipx-up
-script.
-.SH FILES
-.TP
-.B /var/run/ppp\fIn\fB.pid \fR(BSD or Linux), \fB/etc/ppp/ppp\fIn\fB.pid \fR(others)
-Process-ID for pppd process on ppp interface unit \fIn\fR.
-.TP
-.B /var/run/ppp-\fIname\fB.pid \fR(BSD or Linux), \fB/etc/ppp/ppp-\fIname\fB.pid \fR(others)
-Process-ID for pppd process for logical link \fIname\fR (see the
-\fIlinkname\fR option).
-.TP
-.B /etc/ppp/pap-secrets
-Usernames, passwords and IP addresses for PAP authentication.  This
-file should be owned by root and not readable or writable by any other
-user.  Pppd will log a warning if this is not the case.
-.TP
-.B /etc/ppp/chap-secrets
-Names, secrets and IP addresses for CHAP authentication.  As for
-/etc/ppp/pap-secrets, this file should be owned by root and not
-readable or writable by any other user.  Pppd will log a warning if
-this is not the case.
-.TP
-.B /etc/ppp/options
-System default options for pppd, read before user default options or
-command-line options.
-.TP
-.B ~/.ppprc
-User default options, read before /etc/ppp/options.\fIttyname\fR.
-.TP
-.B /etc/ppp/options.\fIttyname
-System default options for the serial port being used, read after
-~/.ppprc.  In forming the \fIttyname\fR part of this
-filename, an initial /dev/ is stripped from the port name (if
-present), and any slashes in the remaining part are converted to
-dots.
-.TP
-.B /etc/ppp/peers
-A directory containing options files which may contain privileged
-options, even if pppd was invoked by a user other than root.  The
-system administrator can create options files in this directory to
-permit non-privileged users to dial out without requiring the peer to
-authenticate, but only to certain trusted peers.
-.SH SEE ALSO
-.TP
-.B RFC1144
-Jacobson, V.
-\fICompressing TCP/IP headers for low-speed serial links.\fR
-February 1990.
-.TP
-.B RFC1321
-Rivest, R.
-.I The MD5 Message-Digest Algorithm.
-April 1992.
-.TP
-.B RFC1332
-McGregor, G.
-.I PPP Internet Protocol Control Protocol (IPCP).
-May 1992.
-.TP
-.B RFC1334
-Lloyd, B.; Simpson, W.A.
-.I PPP authentication protocols.
-October 1992.
-.TP
-.B RFC1661
-Simpson, W.A.
-.I The Point\-to\-Point Protocol (PPP).
-July 1994.
-.TP
-.B RFC1662
-Simpson, W.A.
-.I PPP in HDLC-like Framing.
-July 1994.
-.TP
-.B RFC2472
-Haskin, D.
-.I IP Version 6 over PPP
-December 1998.
-.SH NOTES
-The following signals have the specified effect when sent to pppd.
-.TP
-.B SIGINT, SIGTERM
-These signals cause pppd to terminate the link (by closing LCP),
-restore the serial device settings, and exit.
-.TP
-.B SIGHUP
-This signal causes pppd to terminate the link, restore the serial
-device settings, and close the serial device.  If the \fIpersist\fR or
-\fIdemand\fR option has been specified, pppd will try to reopen the
-serial device and start another connection (after the holdoff period).
-Otherwise pppd will exit.  If this signal is received during the
-holdoff period, it causes pppd to end the holdoff period immediately.
-.TP
-.B SIGUSR1
-This signal toggles the state of the \fIdebug\fR option.
-.TP
-.B SIGUSR2
-This signal causes pppd to renegotiate compression.  This can be
-useful to re-enable compression after it has been disabled as a result
-of a fatal decompression error.  (Fatal decompression errors generally
-indicate a bug in one or other implementation.)
-
-.SH AUTHORS
-Paul Mackerras (Paul.Mackerras@cs.anu.edu.au), based on earlier work by
-Drew Perkins,
-Brad Clements,
-Karl Fox,
-Greg Christy,
-and
-Brad Parker.
diff --git a/mdk-stage1/ppp/pppd/pppd.h b/mdk-stage1/ppp/pppd/pppd.h
deleted file mode 100644
index 02f6dfcef..000000000
--- a/mdk-stage1/ppp/pppd/pppd.h
+++ /dev/null
@@ -1,787 +0,0 @@
-/*
- * pppd.h - PPP daemon global declarations.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * TODO:
- */
-
-#ifndef __PPPD_H__
-#define __PPPD_H__
-
-#include <stdio.h>		/* for FILE */
-#include <limits.h>		/* for NGROUPS_MAX */
-#include <sys/param.h>		/* for MAXPATHLEN and BSD4_4, if defined */
-#include <sys/types.h>		/* for u_int32_t, if defined */
-#include <sys/time.h>		/* for struct timeval */
-#include <net/ppp_defs.h>
-#include "patchlevel.h"
-
-#if defined(__STDC__)
-#include <stdarg.h>
-#define __V(x)	x
-#else
-#include <varargs.h>
-#define __V(x)	(va_alist) va_dcl
-#define const
-#define volatile
-#endif
-
-#ifdef INET6
-#include "eui64.h"
-#endif
-
-/*
- * Limits.
- */
-
-#define NUM_PPP		1	/* One PPP interface supported (per process) */
-#define MAXWORDLEN	1024	/* max length of word in file (incl null) */
-#define MAXARGS		1	/* max # args to a command */
-#define MAXNAMELEN	256	/* max length of hostname or name for auth */
-#define MAXSECRETLEN	256	/* max length of password or secret */
-
-/*
- * Option descriptor structure.
- */
-
-typedef unsigned char	bool;
-
-enum opt_type {
-	o_special_noarg = 0,
-	o_special = 1,
-	o_bool,
-	o_int,
-	o_uint32,
-	o_string,
-	o_wild,
-};
-
-typedef struct {
-	char	*name;		/* name of the option */
-	enum opt_type type;
-	void	*addr;
-	char	*description;
-	int	flags;
-	void	*addr2;
-	int	upper_limit;
-	int	lower_limit;
-	const char *source;
-	short int priority;
-	short int winner;
-} option_t;
-
-/* Values for flags */
-#define OPT_VALUE	0xff	/* mask for presupplied value */
-#define OPT_HEX		0x100	/* int option is in hex */
-#define OPT_NOARG	0x200	/* option doesn't take argument */
-#define OPT_OR		0x400	/* OR in argument to value */
-#define OPT_INC		0x800	/* increment value */
-#define OPT_PRIV	0x1000	/* privileged option */
-#define OPT_STATIC	0x2000	/* string option goes into static array */
-#define OPT_LLIMIT	0x4000	/* check value against lower limit */
-#define OPT_ULIMIT	0x8000	/* check value against upper limit */
-#define OPT_LIMITS	(OPT_LLIMIT|OPT_ULIMIT)
-#define OPT_ZEROOK	0x10000	/* 0 value is OK even if not within limits */
-#define OPT_HIDE	0x10000	/* for o_string, print value as ?????? */
-#define OPT_A2LIST	0x10000 /* for o_special, keep list of values */
-#define OPT_NOINCR	0x20000	/* value mustn't be increased */
-#define OPT_ZEROINF	0x40000	/* with OPT_NOINCR, 0 == infinity */
-#define OPT_PRIO	0x80000	/* process option priorities for this option */
-#define OPT_PRIOSUB	0x100000 /* subsidiary member of priority group */
-#define OPT_ALIAS	0x200000 /* option is alias for previous option */
-#define OPT_A2COPY	0x400000 /* addr2 -> second location to rcv value */
-#define OPT_ENABLE	0x800000 /* use *addr2 as enable for option */
-#define OPT_A2CLR	0x1000000 /* clear *(bool *)addr2 */
-#define OPT_PRIVFIX	0x2000000 /* user can't override if set by root */
-#define OPT_INITONLY	0x4000000 /* option can only be set in init phase */
-#define OPT_DEVEQUIV	0x8000000 /* equiv to device name */
-#define OPT_DEVNAM	(OPT_INITONLY | OPT_DEVEQUIV)
-#define OPT_A2PRINTER	0x10000000 /* *addr2 is a fn for printing option */
-#define OPT_A2STRVAL	0x20000000 /* *addr2 points to current string value */
-#define OPT_NOPRINT	0x40000000 /* don't print this option at all */
-
-#define OPT_VAL(x)	((x) & OPT_VALUE)
-
-/* Values for priority */
-#define OPRIO_DEFAULT	0	/* a default value */
-#define OPRIO_CFGFILE	1	/* value from a configuration file */
-#define OPRIO_CMDLINE	2	/* value from the command line */
-#define OPRIO_SECFILE	3	/* value from options in a secrets file */
-#define OPRIO_ROOT	100	/* added to priority if OPT_PRIVFIX && root */
-
-#ifndef GIDSET_TYPE
-#define GIDSET_TYPE	gid_t
-#endif
-
-/* Structure representing a list of permitted IP addresses. */
-struct permitted_ip {
-    int		permit;		/* 1 = permit, 0 = forbid */
-    u_int32_t	base;		/* match if (addr & mask) == base */
-    u_int32_t	mask;		/* base and mask are in network byte order */
-};
-
-/*
- * Unfortunately, the linux kernel driver uses a different structure
- * for statistics from the rest of the ports.
- * This structure serves as a common representation for the bits
- * pppd needs.
- */
-struct pppd_stats {
-    unsigned int	bytes_in;
-    unsigned int	bytes_out;
-};
-
-/* Used for storing a sequence of words.  Usually malloced. */
-struct wordlist {
-    struct wordlist	*next;
-    char		*word;
-};
-
-/* An endpoint discriminator, used with multilink. */
-#define MAX_ENDP_LEN	20	/* maximum length of discriminator value */
-struct epdisc {
-    unsigned char	class;
-    unsigned char	length;
-    unsigned char	value[MAX_ENDP_LEN];
-};
-
-/* values for epdisc.class */
-#define EPD_NULL	0	/* null discriminator, no data */
-#define EPD_LOCAL	1
-#define EPD_IP		2
-#define EPD_MAC		3
-#define EPD_MAGIC	4
-#define EPD_PHONENUM	5
-
-typedef void (*notify_func) __P((void *, int));
-
-struct notifier {
-    struct notifier *next;
-    notify_func	    func;
-    void	    *arg;
-};
-
-/*
- * Global variables.
- */
-
-extern int	hungup;		/* Physical layer has disconnected */
-extern int	ifunit;		/* Interface unit number */
-extern char	ifname[];	/* Interface name */
-extern char	hostname[];	/* Our hostname */
-extern u_char	outpacket_buf[]; /* Buffer for outgoing packets */
-extern int	phase;		/* Current state of link - see values below */
-extern int	baud_rate;	/* Current link speed in bits/sec */
-extern char	*progname;	/* Name of this program */
-extern int	redirect_stderr;/* Connector's stderr should go to file */
-extern char	peer_authname[];/* Authenticated name of peer */
-extern int	privileged;	/* We were run by real-uid root */
-extern int	need_holdoff;	/* Need holdoff period after link terminates */
-extern char	**script_env;	/* Environment variables for scripts */
-extern int	detached;	/* Have detached from controlling tty */
-extern GIDSET_TYPE groups[NGROUPS_MAX];	/* groups the user is in */
-extern int	ngroups;	/* How many groups valid in groups */
-extern struct pppd_stats link_stats; /* byte/packet counts etc. for link */
-extern int	link_stats_valid; /* set if link_stats is valid */
-extern int	link_connect_time; /* time the link was up for */
-extern int	using_pty;	/* using pty as device (notty or pty opt.) */
-extern int	log_to_fd;	/* logging to this fd as well as syslog */
-extern bool	log_default;	/* log_to_fd is default (stdout) */
-extern char	*no_ppp_msg;	/* message to print if ppp not in kernel */
-extern volatile int status;	/* exit status for pppd */
-extern bool	devnam_fixed;	/* can no longer change devnam */
-extern int	unsuccess;	/* # unsuccessful connection attempts */
-extern int	do_callback;	/* set if we want to do callback next */
-extern int	doing_callback;	/* set if this is a callback */
-extern char	ppp_devnam[MAXPATHLEN];
-extern struct notifier *pidchange;   /* for notifications of pid changing */
-extern struct notifier *phasechange; /* for notifications of phase changes */
-extern struct notifier *exitnotify;  /* for notification that we're exiting */
-extern struct notifier *sigreceived; /* notification of received signal */
-extern int	listen_time;	/* time to listen first (ms) */
-
-/* Values for do_callback and doing_callback */
-#define CALLBACK_DIALIN		1	/* we are expecting the call back */
-#define CALLBACK_DIALOUT	2	/* we are dialling out to call back */
-
-/*
- * Variables set by command-line options.
- */
-
-extern int	debug;		/* Debug flag */
-extern int	kdebugflag;	/* Tell kernel to print debug messages */
-extern int	default_device;	/* Using /dev/tty or equivalent */
-extern char	devnam[MAXPATHLEN];	/* Device name */
-extern int	crtscts;	/* Use hardware flow control */
-extern bool	modem;		/* Use modem control lines */
-extern int	inspeed;	/* Input/Output speed requested */
-extern u_int32_t netmask;	/* IP netmask to set on interface */
-extern bool	lockflag;	/* Create lock file to lock the serial dev */
-extern bool	nodetach;	/* Don't detach from controlling tty */
-extern bool	updetach;	/* Detach from controlling tty when link up */
-extern char	*initializer;	/* Script to initialize physical link */
-extern char	*connect_script; /* Script to establish physical link */
-extern char	*disconnect_script; /* Script to disestablish physical link */
-extern char	*welcomer;	/* Script to welcome client after connection */
-extern char	*ptycommand;	/* Command to run on other side of pty */
-extern int	maxconnect;	/* Maximum connect time (seconds) */
-extern char	user[MAXNAMELEN];/* Our name for authenticating ourselves */
-extern char	passwd[MAXSECRETLEN];	/* Password for PAP or CHAP */
-extern bool	auth_required;	/* Peer is required to authenticate */
-extern bool	persist;	/* Reopen link after it goes down */
-extern bool	uselogin;	/* Use /etc/passwd for checking PAP */
-extern char	our_name[MAXNAMELEN];/* Our name for authentication purposes */
-extern char	remote_name[MAXNAMELEN]; /* Peer's name for authentication */
-extern bool	explicit_remote;/* remote_name specified with remotename opt */
-extern bool	demand;		/* Do dial-on-demand */
-extern char	*ipparam;	/* Extra parameter for ip up/down scripts */
-extern bool	cryptpap;	/* Others' PAP passwords are encrypted */
-extern int	idle_time_limit;/* Shut down link if idle for this long */
-extern int	holdoff;	/* Dead time before restarting */
-extern bool	holdoff_specified; /* true if user gave a holdoff value */
-extern bool	notty;		/* Stdin/out is not a tty */
-extern char	*pty_socket;	/* Socket to connect to pty */
-extern char	*record_file;	/* File to record chars sent/received */
-extern bool	sync_serial;	/* Device is synchronous serial device */
-extern int	maxfail;	/* Max # of unsuccessful connection attempts */
-extern char	linkname[MAXPATHLEN]; /* logical name for link */
-extern bool	tune_kernel;	/* May alter kernel settings as necessary */
-extern int	connect_delay;	/* Time to delay after connect script */
-extern int	max_data_rate;	/* max bytes/sec through charshunt */
-extern int	req_unit;	/* interface unit number to use */
-extern bool	multilink;	/* enable multilink operation */
-extern bool	noendpoint;	/* don't send or accept endpt. discrim. */
-extern char	*bundle_name;	/* bundle name for multilink */
-extern bool	dump_options;	/* print out option values */
-extern bool	dryrun;		/* check everything, print options, exit */
-
-#ifdef PPP_FILTER
-extern struct	bpf_program pass_filter;   /* Filter for pkts to pass */
-extern struct	bpf_program active_filter; /* Filter for link-active pkts */
-#endif
-
-#ifdef MSLANMAN
-extern bool	ms_lanman;	/* Use LanMan password instead of NT */
-				/* Has meaning only with MS-CHAP challenges */
-#endif
-
-extern char *current_option;	/* the name of the option being parsed */
-extern int  privileged_option;	/* set iff the current option came from root */
-extern char *option_source;	/* string saying where the option came from */
-extern int  option_priority;	/* priority of current options */
-
-/*
- * Values for phase.
- */
-#define PHASE_DEAD		0
-#define PHASE_INITIALIZE	1
-#define PHASE_SERIALCONN	2
-#define PHASE_DORMANT		3
-#define PHASE_ESTABLISH		4
-#define PHASE_AUTHENTICATE	5
-#define PHASE_CALLBACK		6
-#define PHASE_NETWORK		7
-#define PHASE_RUNNING		8
-#define PHASE_TERMINATE		9
-#define PHASE_DISCONNECT	10
-#define PHASE_HOLDOFF		11
-
-/*
- * The following struct gives the addresses of procedures to call
- * for a particular protocol.
- */
-struct protent {
-    u_short protocol;		/* PPP protocol number */
-    /* Initialization procedure */
-    void (*init) __P((int unit));
-    /* Process a received packet */
-    void (*input) __P((int unit, u_char *pkt, int len));
-    /* Process a received protocol-reject */
-    void (*protrej) __P((int unit));
-    /* Lower layer has come up */
-    void (*lowerup) __P((int unit));
-    /* Lower layer has gone down */
-    void (*lowerdown) __P((int unit));
-    /* Open the protocol */
-    void (*open) __P((int unit));
-    /* Close the protocol */
-    void (*close) __P((int unit, char *reason));
-    /* Print a packet in readable form */
-    int  (*printpkt) __P((u_char *pkt, int len,
-			  void (*printer) __P((void *, char *, ...)),
-			  void *arg));
-    /* Process a received data packet */
-    void (*datainput) __P((int unit, u_char *pkt, int len));
-    bool enabled_flag;		/* 0 iff protocol is disabled */
-    char *name;			/* Text name of protocol */
-    char *data_name;		/* Text name of corresponding data protocol */
-    option_t *options;		/* List of command-line options */
-    /* Check requested options, assign defaults */
-    void (*check_options) __P((void));
-    /* Configure interface for demand-dial */
-    int  (*demand_conf) __P((int unit));
-    /* Say whether to bring up link for this pkt */
-    int  (*active_pkt) __P((u_char *pkt, int len));
-};
-
-/* Table of pointers to supported protocols */
-extern struct protent *protocols[];
-
-/*
- * This struct contains pointers to a set of procedures for
- * doing operations on a "channel".  A channel provides a way
- * to send and receive PPP packets - the canonical example is
- * a serial port device in PPP line discipline (or equivalently
- * with PPP STREAMS modules pushed onto it).
- */
-struct channel {
-	/* set of options for this channel */
-	option_t *options;
-	/* find and process a per-channel options file */
-	void (*process_extra_options) __P((void));
-	/* check all the options that have been given */
-	void (*check_options) __P((void));
-	/* get the channel ready to do PPP, return a file descriptor */
-	int  (*connect) __P((void));
-	/* we're finished with the channel */
-	void (*disconnect) __P((void));
-	/* put the channel into PPP `mode' */
-	int  (*establish_ppp) __P((int));
-	/* take the channel out of PPP `mode', restore loopback if demand */
-	void (*disestablish_ppp) __P((int));
-	/* set the transmit-side PPP parameters of the channel */
-	void (*send_config) __P((int, u_int32_t, int, int));
-	/* set the receive-side PPP parameters of the channel */
-	void (*recv_config) __P((int, u_int32_t, int, int));
-	/* cleanup on error or normal exit */
-	void (*cleanup) __P((void));
-	/* close the device, called in children after fork */
-	void (*close) __P((void));
-};
-
-extern struct channel *the_channel;
-
-#define ppp_send_config(unit, mtu, accm, pc, acc)			 \
-do {									 \
-	if (the_channel->send_config)					 \
-		(*the_channel->send_config)((mtu), (accm), (pc), (acc)); \
-} while (0)
-
-#define ppp_recv_config(unit, mtu, accm, pc, acc)			 \
-do {									 \
-	if (the_channel->send_config)					 \
-		(*the_channel->recv_config)((mtu), (accm), (pc), (acc)); \
-} while (0)
-
-/*
- * Prototypes.
- */
-
-/* Procedures exported from main.c. */
-void set_ifunit __P((int));	/* set stuff that depends on ifunit */
-void detach __P((void));	/* Detach from controlling tty */
-void die __P((int));		/* Cleanup and exit */
-void quit __P((void));		/* like die(1) */
-void novm __P((char *));	/* Say we ran out of memory, and die */
-void timeout __P((void (*func)(void *), void *arg, int s, int us));
-				/* Call func(arg) after s.us seconds */
-void untimeout __P((void (*func)(void *), void *arg));
-				/* Cancel call to func(arg) */
-void record_child __P((int, char *, void (*) (void *), void *));
-int  device_script __P((char *cmd, int in, int out, int dont_wait));
-				/* Run `cmd' with given stdin and stdout */
-pid_t run_program __P((char *prog, char **args, int must_exist,
-		       void (*done)(void *), void *arg));
-				/* Run program prog with args in child */
-void reopen_log __P((void));	/* (re)open the connection to syslog */
-void update_link_stats __P((int)); /* Get stats at link termination */
-void script_setenv __P((char *, char *, int));	/* set script env var */
-void script_unsetenv __P((char *));		/* unset script env var */
-void new_phase __P((int));	/* signal start of new phase */
-void add_notifier __P((struct notifier **, notify_func, void *));
-void remove_notifier __P((struct notifier **, notify_func, void *));
-void notify __P((struct notifier *, int));
-
-/* Procedures exported from tty.c. */
-void tty_init __P((void));
-
-/* Procedures exported from utils.c. */
-void log_packet __P((u_char *, int, char *, int));
-				/* Format a packet and log it with syslog */
-void print_string __P((char *, int,  void (*) (void *, char *, ...),
-		void *));	/* Format a string for output */
-int slprintf __P((char *, int, char *, ...));		/* sprintf++ */
-int vslprintf __P((char *, int, char *, va_list));	/* vsprintf++ */
-size_t strlcpy __P((char *, const char *, size_t));	/* safe strcpy */
-size_t strlcat __P((char *, const char *, size_t));	/* safe strncpy */
-void dbglog __P((char *, ...));	/* log a debug message */
-void info __P((char *, ...));	/* log an informational message */
-void notice __P((char *, ...));	/* log a notice-level message */
-void warn __P((char *, ...));	/* log a warning message */
-void error __P((char *, ...));	/* log an error message */
-void fatal __P((char *, ...));	/* log an error message and die(1) */
-void init_pr_log __P((char *, int));	/* initialize for using pr_log */
-void pr_log __P((void *, char *, ...));	/* printer fn, output to syslog */
-void end_pr_log __P((void));	/* finish up after using pr_log */
-
-/* Procedures exported from auth.c */
-void link_required __P((int));	  /* we are starting to use the link */
-void link_terminated __P((int));  /* we are finished with the link */
-void link_down __P((int));	  /* the LCP layer has left the Opened state */
-void link_established __P((int)); /* the link is up; authenticate now */
-void start_networks __P((void));  /* start all the network control protos */
-void np_up __P((int, int));	  /* a network protocol has come up */
-void np_down __P((int, int));	  /* a network protocol has gone down */
-void np_finished __P((int, int)); /* a network protocol no longer needs link */
-void auth_peer_fail __P((int, int));
-				/* peer failed to authenticate itself */
-void auth_peer_success __P((int, int, char *, int));
-				/* peer successfully authenticated itself */
-void auth_withpeer_fail __P((int, int));
-				/* we failed to authenticate ourselves */
-void auth_withpeer_success __P((int, int));
-				/* we successfully authenticated ourselves */
-void auth_check_options __P((void));
-				/* check authentication options supplied */
-void auth_reset __P((int));	/* check what secrets we have */
-int  check_passwd __P((int, char *, int, char *, int, char **));
-				/* Check peer-supplied username/password */
-int  get_secret __P((int, char *, char *, char *, int *, int));
-				/* get "secret" for chap */
-int  auth_ip_addr __P((int, u_int32_t));
-				/* check if IP address is authorized */
-int  bad_ip_adrs __P((u_int32_t));
-				/* check if IP address is unreasonable */
-
-/* Procedures exported from demand.c */
-void demand_conf __P((void));	/* config interface(s) for demand-dial */
-void demand_block __P((void));	/* set all NPs to queue up packets */
-void demand_unblock __P((void)); /* set all NPs to pass packets */
-void demand_discard __P((void)); /* set all NPs to discard packets */
-void demand_rexmit __P((int));	/* retransmit saved frames for an NP */
-int  loop_chars __P((unsigned char *, int)); /* process chars from loopback */
-int  loop_frame __P((unsigned char *, int)); /* should we bring link up? */
-
-/* Procedures exported from multilink.c */
-void mp_check_options __P((void)); /* Check multilink-related options */
-int  mp_join_bundle __P((void));  /* join our link to an appropriate bundle */
-char *epdisc_to_str __P((struct epdisc *)); /* string from endpoint discrim. */
-int  str_to_epdisc __P((struct epdisc *, char *)); /* endpt disc. from str */
-
-/* Procedures exported from sys-*.c */
-void sys_init __P((void));	/* Do system-dependent initialization */
-void sys_cleanup __P((void));	/* Restore system state before exiting */
-int  sys_check_options __P((void)); /* Check options specified */
-void sys_close __P((void));	/* Clean up in a child before execing */
-int  ppp_available __P((void));	/* Test whether ppp kernel support exists */
-int  get_pty __P((int *, int *, char *, int));	/* Get pty master/slave */
-int  open_ppp_loopback __P((void)); /* Open loopback for demand-dialling */
-int  tty_establish_ppp __P((int));  /* Turn serial port into a ppp interface */
-void tty_disestablish_ppp __P((int)); /* Restore port to normal operation */
-void make_new_bundle __P((int, int, int, int)); /* Create new bundle */
-int  bundle_attach __P((int));	/* Attach link to existing bundle */
-void cfg_bundle __P((int, int, int, int)); /* Configure existing bundle */
-void clean_check __P((void));	/* Check if line was 8-bit clean */
-void set_up_tty __P((int, int)); /* Set up port's speed, parameters, etc. */
-void restore_tty __P((int));	/* Restore port's original parameters */
-void setdtr __P((int, int));	/* Raise or lower port's DTR line */
-void output __P((int, u_char *, int)); /* Output a PPP packet */
-void wait_input __P((struct timeval *));
-				/* Wait for input, with timeout */
-void add_fd __P((int));		/* Add fd to set to wait for */
-void remove_fd __P((int));	/* Remove fd from set to wait for */
-int  read_packet __P((u_char *)); /* Read PPP packet */
-int  get_loop_output __P((void)); /* Read pkts from loopback */
-void tty_send_config __P((int, u_int32_t, int, int));
-				/* Configure i/f transmit parameters */
-void tty_set_xaccm __P((ext_accm));
-				/* Set extended transmit ACCM */
-void tty_recv_config __P((int, u_int32_t, int, int));
-				/* Configure i/f receive parameters */
-int  ccp_test __P((int, u_char *, int, int));
-				/* Test support for compression scheme */
-void ccp_flags_set __P((int, int, int));
-				/* Set kernel CCP state */
-int  ccp_fatal_error __P((int)); /* Test for fatal decomp error in kernel */
-int  get_idle_time __P((int, struct ppp_idle *));
-				/* Find out how long link has been idle */
-int  get_ppp_stats __P((int, struct pppd_stats *));
-				/* Return link statistics */
-void netif_set_mtu __P((int, int)); /* Set PPP interface MTU */
-int  sifvjcomp __P((int, int, int, int));
-				/* Configure VJ TCP header compression */
-int  sifup __P((int));		/* Configure i/f up for one protocol */
-int  sifnpmode __P((int u, int proto, enum NPmode mode));
-				/* Set mode for handling packets for proto */
-int  sifdown __P((int));	/* Configure i/f down for one protocol */
-int  sifaddr __P((int, u_int32_t, u_int32_t, u_int32_t));
-				/* Configure IPv4 addresses for i/f */
-int  cifaddr __P((int, u_int32_t, u_int32_t));
-				/* Reset i/f IP addresses */
-#ifdef INET6
-int  sif6addr __P((int, eui64_t, eui64_t));
-				/* Configure IPv6 addresses for i/f */
-int  cif6addr __P((int, eui64_t, eui64_t));
-				/* Remove an IPv6 address from i/f */
-#endif
-int  sifdefaultroute __P((int, u_int32_t, u_int32_t));
-				/* Create default route through i/f */
-int  cifdefaultroute __P((int, u_int32_t, u_int32_t));
-				/* Delete default route through i/f */
-int  sifproxyarp __P((int, u_int32_t));
-				/* Add proxy ARP entry for peer */
-int  cifproxyarp __P((int, u_int32_t));
-				/* Delete proxy ARP entry for peer */
-u_int32_t GetMask __P((u_int32_t)); /* Get appropriate netmask for address */
-int  lock __P((char *));	/* Create lock file for device */
-int  relock __P((int));		/* Rewrite lock file with new pid */
-void unlock __P((void));	/* Delete previously-created lock file */
-int  get_host_seed __P((void));	/* Get host-dependent random number seed */
-int  have_route_to __P((u_int32_t)); /* Check if route to addr exists */
-#ifdef PPP_FILTER
-int  set_filters __P((struct bpf_program *pass, struct bpf_program *active));
-				/* Set filter programs in kernel */
-#endif
-#ifdef IPX_CHANGE
-int  sipxfaddr __P((int, unsigned long, unsigned char *));
-int  cipxfaddr __P((int));
-#endif
-int  get_if_hwaddr __P((u_char *addr, char *name));
-char *get_first_ethernet __P((void));
-
-/* Procedures exported from options.c */
-int  parse_args __P((int argc, char **argv));
-				/* Parse options from arguments given */
-int  options_from_file __P((char *filename, int must_exist, int check_prot,
-			    int privileged));
-				/* Parse options from an options file */
-int  options_from_user __P((void)); /* Parse options from user's .ppprc */
-int  options_for_tty __P((void)); /* Parse options from /etc/ppp/options.tty */
-int  options_from_list __P((struct wordlist *, int privileged));
-				/* Parse options from a wordlist */
-int  getword __P((FILE *f, char *word, int *newlinep, char *filename));
-				/* Read a word from a file */
-void option_error __P((char *fmt, ...));
-				/* Print an error message about an option */
-int int_option __P((char *, int *));
-				/* Simplified number_option for decimal ints */
-void add_options __P((option_t *)); /* Add extra options */
-void check_options __P((void));	/* check values after all options parsed */
-int  override_value __P((const char *, int, const char *));
-				/* override value if permitted by priority */
-void print_options __P((void (*) __P((void *, char *, ...)), void *));
-				/* print out values of all options */
-
-int parse_dotted_ip __P((char *, u_int32_t *));
-
-/*
- * Hooks to enable plugins to change various things.
- */
-extern int (*new_phase_hook) __P((int));
-extern int (*idle_time_hook) __P((struct ppp_idle *));
-extern int (*holdoff_hook) __P((void));
-extern int (*pap_check_hook) __P((void));
-extern int (*pap_auth_hook) __P((char *user, char *passwd, char **msgp,
-				 struct wordlist **paddrs,
-				 struct wordlist **popts));
-extern void (*pap_logout_hook) __P((void));
-extern int (*pap_passwd_hook) __P((char *user, char *passwd));
-extern void (*ip_up_hook) __P((void));
-extern void (*ip_down_hook) __P((void));
-extern void (*ip_choose_hook) __P((u_int32_t *));
-
-/*
- * Inline versions of get/put char/short/long.
- * Pointer is advanced; we assume that both arguments
- * are lvalues and will already be in registers.
- * cp MUST be u_char *.
- */
-#define GETCHAR(c, cp) { \
-	(c) = *(cp)++; \
-}
-#define PUTCHAR(c, cp) { \
-	*(cp)++ = (u_char) (c); \
-}
-
-
-#define GETSHORT(s, cp) { \
-	(s) = *(cp)++ << 8; \
-	(s) |= *(cp)++; \
-}
-#define PUTSHORT(s, cp) { \
-	*(cp)++ = (u_char) ((s) >> 8); \
-	*(cp)++ = (u_char) (s); \
-}
-
-#define GETLONG(l, cp) { \
-	(l) = *(cp)++ << 8; \
-	(l) |= *(cp)++; (l) <<= 8; \
-	(l) |= *(cp)++; (l) <<= 8; \
-	(l) |= *(cp)++; \
-}
-#define PUTLONG(l, cp) { \
-	*(cp)++ = (u_char) ((l) >> 24); \
-	*(cp)++ = (u_char) ((l) >> 16); \
-	*(cp)++ = (u_char) ((l) >> 8); \
-	*(cp)++ = (u_char) (l); \
-}
-
-#define INCPTR(n, cp)	((cp) += (n))
-#define DECPTR(n, cp)	((cp) -= (n))
-
-/*
- * System dependent definitions for user-level 4.3BSD UNIX implementation.
- */
-
-#define TIMEOUT(r, f, t)	timeout((r), (f), (t), 0)
-#define UNTIMEOUT(r, f)		untimeout((r), (f))
-
-#define BCOPY(s, d, l)		memcpy(d, s, l)
-#define BZERO(s, n)		memset(s, 0, n)
-
-#define PRINTMSG(m, l)		{ info("Remote message: %0.*v", l, m); }
-
-/*
- * MAKEHEADER - Add Header fields to a packet.
- */
-#define MAKEHEADER(p, t) { \
-    PUTCHAR(PPP_ALLSTATIONS, p); \
-    PUTCHAR(PPP_UI, p); \
-    PUTSHORT(t, p); }
-
-/*
- * Exit status values.
- */
-#define EXIT_OK			0
-#define EXIT_FATAL_ERROR	1
-#define EXIT_OPTION_ERROR	2
-#define EXIT_NOT_ROOT		3
-#define EXIT_NO_KERNEL_SUPPORT	4
-#define EXIT_USER_REQUEST	5
-#define EXIT_LOCK_FAILED	6
-#define EXIT_OPEN_FAILED	7
-#define EXIT_CONNECT_FAILED	8
-#define EXIT_PTYCMD_FAILED	9
-#define EXIT_NEGOTIATION_FAILED	10
-#define EXIT_PEER_AUTH_FAILED	11
-#define EXIT_IDLE_TIMEOUT	12
-#define EXIT_CONNECT_TIME	13
-#define EXIT_CALLBACK		14
-#define EXIT_PEER_DEAD		15
-#define EXIT_HANGUP		16
-#define EXIT_LOOPBACK		17
-#define EXIT_INIT_FAILED	18
-#define EXIT_AUTH_TOPEER_FAILED	19
-
-/*
- * Debug macros.  Slightly useful for finding bugs in pppd, not particularly
- * useful for finding out why your connection isn't being established.
- */
-#ifdef DEBUGALL
-#define DEBUGMAIN	1
-#define DEBUGFSM	1
-#define DEBUGLCP	1
-#define DEBUGIPCP	1
-#define DEBUGIPV6CP	1
-#define DEBUGUPAP	1
-#define DEBUGCHAP	1
-#endif
-
-#ifndef LOG_PPP			/* we use LOG_LOCAL2 for syslog by default */
-#if defined(DEBUGMAIN) || defined(DEBUGFSM) || defined(DEBUGSYS) \
-  || defined(DEBUGLCP) || defined(DEBUGIPCP) || defined(DEBUGUPAP) \
-  || defined(DEBUGCHAP) || defined(DEBUG) || defined(DEBUGIPV6CP)
-#define LOG_PPP LOG_LOCAL2
-#else
-#define LOG_PPP LOG_DAEMON
-#endif
-#endif /* LOG_PPP */
-
-#ifdef DEBUGMAIN
-#define MAINDEBUG(x)	if (debug) dbglog x
-#else
-#define MAINDEBUG(x)
-#endif
-
-#ifdef DEBUGSYS
-#define SYSDEBUG(x)	if (debug) dbglog x
-#else
-#define SYSDEBUG(x)
-#endif
-
-#ifdef DEBUGFSM
-#define FSMDEBUG(x)	if (debug) dbglog x
-#else
-#define FSMDEBUG(x)
-#endif
-
-#ifdef DEBUGLCP
-#define LCPDEBUG(x)	if (debug) dbglog x
-#else
-#define LCPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPCP
-#define IPCPDEBUG(x)	if (debug) dbglog x
-#else
-#define IPCPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPV6CP
-#define IPV6CPDEBUG(x)  if (debug) dbglog x
-#else
-#define IPV6CPDEBUG(x)
-#endif
-
-#ifdef DEBUGUPAP
-#define UPAPDEBUG(x)	if (debug) dbglog x
-#else
-#define UPAPDEBUG(x)
-#endif
-
-#ifdef DEBUGCHAP
-#define CHAPDEBUG(x)	if (debug) dbglog x
-#else
-#define CHAPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPXCP
-#define IPXCPDEBUG(x)	if (debug) dbglog x
-#else
-#define IPXCPDEBUG(x)
-#endif
-
-#ifndef SIGTYPE
-#if defined(sun) || defined(SYSV) || defined(POSIX_SOURCE)
-#define SIGTYPE void
-#else
-#define SIGTYPE int
-#endif /* defined(sun) || defined(SYSV) || defined(POSIX_SOURCE) */
-#endif /* SIGTYPE */
-
-#ifndef MIN
-#define MIN(a, b)	((a) < (b)? (a): (b))
-#endif
-#ifndef MAX
-#define MAX(a, b)	((a) > (b)? (a): (b))
-#endif
-
-#endif /* __PPP_H__ */
diff --git a/mdk-stage1/ppp/pppd/pppd.h.wtmp b/mdk-stage1/ppp/pppd/pppd.h.wtmp
deleted file mode 100644
index 4d440be06..000000000
--- a/mdk-stage1/ppp/pppd/pppd.h.wtmp
+++ /dev/null
@@ -1,789 +0,0 @@
-/*
- * pppd.h - PPP daemon global declarations.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * TODO:
- */
-
-#ifndef __PPPD_H__
-#define __PPPD_H__
-
-#include <stdio.h>		/* for FILE */
-#include <limits.h>		/* for NGROUPS_MAX */
-#include <sys/param.h>		/* for MAXPATHLEN and BSD4_4, if defined */
-#include <sys/types.h>		/* for u_int32_t, if defined */
-#include <sys/time.h>		/* for struct timeval */
-#include <net/ppp_defs.h>
-#include "patchlevel.h"
-
-#if defined(__STDC__)
-#include <stdarg.h>
-#define __V(x)	x
-#else
-#include <varargs.h>
-#define __V(x)	(va_alist) va_dcl
-#define const
-#define volatile
-#endif
-
-#ifdef INET6
-#include "eui64.h"
-#endif
-
-/*
- * Limits.
- */
-
-#define NUM_PPP		1	/* One PPP interface supported (per process) */
-#define MAXWORDLEN	1024	/* max length of word in file (incl null) */
-#define MAXARGS		1	/* max # args to a command */
-#define MAXNAMELEN	256	/* max length of hostname or name for auth */
-#define MAXSECRETLEN	256	/* max length of password or secret */
-
-/*
- * Option descriptor structure.
- */
-
-typedef unsigned char	bool;
-
-enum opt_type {
-	o_special_noarg = 0,
-	o_special = 1,
-	o_bool,
-	o_int,
-	o_uint32,
-	o_string,
-	o_wild,
-};
-
-typedef struct {
-	char	*name;		/* name of the option */
-	enum opt_type type;
-	void	*addr;
-	char	*description;
-	int	flags;
-	void	*addr2;
-	int	upper_limit;
-	int	lower_limit;
-	const char *source;
-	short int priority;
-	short int winner;
-} option_t;
-
-/* Values for flags */
-#define OPT_VALUE	0xff	/* mask for presupplied value */
-#define OPT_HEX		0x100	/* int option is in hex */
-#define OPT_NOARG	0x200	/* option doesn't take argument */
-#define OPT_OR		0x400	/* OR in argument to value */
-#define OPT_INC		0x800	/* increment value */
-#define OPT_PRIV	0x1000	/* privileged option */
-#define OPT_STATIC	0x2000	/* string option goes into static array */
-#define OPT_LLIMIT	0x4000	/* check value against lower limit */
-#define OPT_ULIMIT	0x8000	/* check value against upper limit */
-#define OPT_LIMITS	(OPT_LLIMIT|OPT_ULIMIT)
-#define OPT_ZEROOK	0x10000	/* 0 value is OK even if not within limits */
-#define OPT_HIDE	0x10000	/* for o_string, print value as ?????? */
-#define OPT_A2LIST	0x10000 /* for o_special, keep list of values */
-#define OPT_NOINCR	0x20000	/* value mustn't be increased */
-#define OPT_ZEROINF	0x40000	/* with OPT_NOINCR, 0 == infinity */
-#define OPT_PRIO	0x80000	/* process option priorities for this option */
-#define OPT_PRIOSUB	0x100000 /* subsidiary member of priority group */
-#define OPT_ALIAS	0x200000 /* option is alias for previous option */
-#define OPT_A2COPY	0x400000 /* addr2 -> second location to rcv value */
-#define OPT_ENABLE	0x800000 /* use *addr2 as enable for option */
-#define OPT_A2CLR	0x1000000 /* clear *(bool *)addr2 */
-#define OPT_PRIVFIX	0x2000000 /* user can't override if set by root */
-#define OPT_INITONLY	0x4000000 /* option can only be set in init phase */
-#define OPT_DEVEQUIV	0x8000000 /* equiv to device name */
-#define OPT_DEVNAM	(OPT_INITONLY | OPT_DEVEQUIV)
-#define OPT_A2PRINTER	0x10000000 /* *addr2 is a fn for printing option */
-#define OPT_A2STRVAL	0x20000000 /* *addr2 points to current string value */
-#define OPT_NOPRINT	0x40000000 /* don't print this option at all */
-
-#define OPT_VAL(x)	((x) & OPT_VALUE)
-
-/* Values for priority */
-#define OPRIO_DEFAULT	0	/* a default value */
-#define OPRIO_CFGFILE	1	/* value from a configuration file */
-#define OPRIO_CMDLINE	2	/* value from the command line */
-#define OPRIO_SECFILE	3	/* value from options in a secrets file */
-#define OPRIO_ROOT	100	/* added to priority if OPT_PRIVFIX && root */
-
-#ifndef GIDSET_TYPE
-#define GIDSET_TYPE	gid_t
-#endif
-
-/* Structure representing a list of permitted IP addresses. */
-struct permitted_ip {
-    int		permit;		/* 1 = permit, 0 = forbid */
-    u_int32_t	base;		/* match if (addr & mask) == base */
-    u_int32_t	mask;		/* base and mask are in network byte order */
-};
-
-/*
- * Unfortunately, the linux kernel driver uses a different structure
- * for statistics from the rest of the ports.
- * This structure serves as a common representation for the bits
- * pppd needs.
- */
-struct pppd_stats {
-    unsigned int	bytes_in;
-    unsigned int	bytes_out;
-};
-
-/* Used for storing a sequence of words.  Usually malloced. */
-struct wordlist {
-    struct wordlist	*next;
-    char		*word;
-};
-
-/* An endpoint discriminator, used with multilink. */
-#define MAX_ENDP_LEN	20	/* maximum length of discriminator value */
-struct epdisc {
-    unsigned char	class;
-    unsigned char	length;
-    unsigned char	value[MAX_ENDP_LEN];
-};
-
-/* values for epdisc.class */
-#define EPD_NULL	0	/* null discriminator, no data */
-#define EPD_LOCAL	1
-#define EPD_IP		2
-#define EPD_MAC		3
-#define EPD_MAGIC	4
-#define EPD_PHONENUM	5
-
-typedef void (*notify_func) __P((void *, int));
-
-struct notifier {
-    struct notifier *next;
-    notify_func	    func;
-    void	    *arg;
-};
-
-/*
- * Global variables.
- */
-
-extern int	hungup;		/* Physical layer has disconnected */
-extern int	ifunit;		/* Interface unit number */
-extern char	ifname[];	/* Interface name */
-extern char	hostname[];	/* Our hostname */
-extern u_char	outpacket_buf[]; /* Buffer for outgoing packets */
-extern int	phase;		/* Current state of link - see values below */
-extern int	baud_rate;	/* Current link speed in bits/sec */
-extern char	*progname;	/* Name of this program */
-extern int	redirect_stderr;/* Connector's stderr should go to file */
-extern char	peer_authname[];/* Authenticated name of peer */
-extern int	privileged;	/* We were run by real-uid root */
-extern int	need_holdoff;	/* Need holdoff period after link terminates */
-extern char	**script_env;	/* Environment variables for scripts */
-extern int	detached;	/* Have detached from controlling tty */
-extern GIDSET_TYPE groups[NGROUPS_MAX];	/* groups the user is in */
-extern int	ngroups;	/* How many groups valid in groups */
-extern struct pppd_stats link_stats; /* byte/packet counts etc. for link */
-extern int	link_stats_valid; /* set if link_stats is valid */
-extern int	link_connect_time; /* time the link was up for */
-extern int	using_pty;	/* using pty as device (notty or pty opt.) */
-extern int	log_to_fd;	/* logging to this fd as well as syslog */
-extern bool	log_default;	/* log_to_fd is default (stdout) */
-extern char	*no_ppp_msg;	/* message to print if ppp not in kernel */
-extern volatile int status;	/* exit status for pppd */
-extern bool	devnam_fixed;	/* can no longer change devnam */
-extern int	unsuccess;	/* # unsuccessful connection attempts */
-extern int	do_callback;	/* set if we want to do callback next */
-extern int	doing_callback;	/* set if this is a callback */
-extern char	ppp_devnam[MAXPATHLEN];
-extern struct notifier *pidchange;   /* for notifications of pid changing */
-extern struct notifier *phasechange; /* for notifications of phase changes */
-extern struct notifier *exitnotify;  /* for notification that we're exiting */
-extern struct notifier *sigreceived; /* notification of received signal */
-extern int	listen_time;	/* time to listen first (ms) */
-
-/* Values for do_callback and doing_callback */
-#define CALLBACK_DIALIN		1	/* we are expecting the call back */
-#define CALLBACK_DIALOUT	2	/* we are dialling out to call back */
-
-/*
- * Variables set by command-line options.
- */
-
-extern int	debug;		/* Debug flag */
-extern int	kdebugflag;	/* Tell kernel to print debug messages */
-extern int	default_device;	/* Using /dev/tty or equivalent */
-extern char	devnam[MAXPATHLEN];	/* Device name */
-extern int	crtscts;	/* Use hardware flow control */
-extern bool	modem;		/* Use modem control lines */
-extern int	inspeed;	/* Input/Output speed requested */
-extern u_int32_t netmask;	/* IP netmask to set on interface */
-extern bool	lockflag;	/* Create lock file to lock the serial dev */
-extern bool	nodetach;	/* Don't detach from controlling tty */
-extern bool	updetach;	/* Detach from controlling tty when link up */
-extern char	*initializer;	/* Script to initialize physical link */
-extern char	*connect_script; /* Script to establish physical link */
-extern char	*disconnect_script; /* Script to disestablish physical link */
-extern char	*welcomer;	/* Script to welcome client after connection */
-extern char	*ptycommand;	/* Command to run on other side of pty */
-extern int	maxconnect;	/* Maximum connect time (seconds) */
-extern char	user[MAXNAMELEN];/* Our name for authenticating ourselves */
-extern char	passwd[MAXSECRETLEN];	/* Password for PAP or CHAP */
-extern bool	auth_required;	/* Peer is required to authenticate */
-extern bool	persist;	/* Reopen link after it goes down */
-extern bool	uselogin;	/* Use /etc/passwd for checking PAP */
-extern char	our_name[MAXNAMELEN];/* Our name for authentication purposes */
-extern char	remote_name[MAXNAMELEN]; /* Peer's name for authentication */
-extern bool	explicit_remote;/* remote_name specified with remotename opt */
-extern bool	demand;		/* Do dial-on-demand */
-extern char	*ipparam;	/* Extra parameter for ip up/down scripts */
-extern bool	cryptpap;	/* Others' PAP passwords are encrypted */
-extern int	idle_time_limit;/* Shut down link if idle for this long */
-extern int	holdoff;	/* Dead time before restarting */
-extern bool	holdoff_specified; /* true if user gave a holdoff value */
-extern bool	notty;		/* Stdin/out is not a tty */
-extern char	*pty_socket;	/* Socket to connect to pty */
-extern char	*record_file;	/* File to record chars sent/received */
-extern bool	sync_serial;	/* Device is synchronous serial device */
-extern int	maxfail;	/* Max # of unsuccessful connection attempts */
-extern char	linkname[MAXPATHLEN]; /* logical name for link */
-extern bool	tune_kernel;	/* May alter kernel settings as necessary */
-extern int	connect_delay;	/* Time to delay after connect script */
-extern int	max_data_rate;	/* max bytes/sec through charshunt */
-extern int	req_unit;	/* interface unit number to use */
-extern bool	multilink;	/* enable multilink operation */
-extern bool	noendpoint;	/* don't send or accept endpt. discrim. */
-extern char	*bundle_name;	/* bundle name for multilink */
-extern bool	dump_options;	/* print out option values */
-extern bool	dryrun;		/* check everything, print options, exit */
-
-#ifdef PPP_FILTER
-extern struct	bpf_program pass_filter;   /* Filter for pkts to pass */
-extern struct	bpf_program active_filter; /* Filter for link-active pkts */
-#endif
-
-#ifdef MSLANMAN
-extern bool	ms_lanman;	/* Use LanMan password instead of NT */
-				/* Has meaning only with MS-CHAP challenges */
-#endif
-
-extern char *current_option;	/* the name of the option being parsed */
-extern int  privileged_option;	/* set iff the current option came from root */
-extern char *option_source;	/* string saying where the option came from */
-extern int  option_priority;	/* priority of current options */
-
-/*
- * Values for phase.
- */
-#define PHASE_DEAD		0
-#define PHASE_INITIALIZE	1
-#define PHASE_SERIALCONN	2
-#define PHASE_DORMANT		3
-#define PHASE_ESTABLISH		4
-#define PHASE_AUTHENTICATE	5
-#define PHASE_CALLBACK		6
-#define PHASE_NETWORK		7
-#define PHASE_RUNNING		8
-#define PHASE_TERMINATE		9
-#define PHASE_DISCONNECT	10
-#define PHASE_HOLDOFF		11
-
-/*
- * The following struct gives the addresses of procedures to call
- * for a particular protocol.
- */
-struct protent {
-    u_short protocol;		/* PPP protocol number */
-    /* Initialization procedure */
-    void (*init) __P((int unit));
-    /* Process a received packet */
-    void (*input) __P((int unit, u_char *pkt, int len));
-    /* Process a received protocol-reject */
-    void (*protrej) __P((int unit));
-    /* Lower layer has come up */
-    void (*lowerup) __P((int unit));
-    /* Lower layer has gone down */
-    void (*lowerdown) __P((int unit));
-    /* Open the protocol */
-    void (*open) __P((int unit));
-    /* Close the protocol */
-    void (*close) __P((int unit, char *reason));
-    /* Print a packet in readable form */
-    int  (*printpkt) __P((u_char *pkt, int len,
-			  void (*printer) __P((void *, char *, ...)),
-			  void *arg));
-    /* Process a received data packet */
-    void (*datainput) __P((int unit, u_char *pkt, int len));
-    bool enabled_flag;		/* 0 iff protocol is disabled */
-    char *name;			/* Text name of protocol */
-    char *data_name;		/* Text name of corresponding data protocol */
-    option_t *options;		/* List of command-line options */
-    /* Check requested options, assign defaults */
-    void (*check_options) __P((void));
-    /* Configure interface for demand-dial */
-    int  (*demand_conf) __P((int unit));
-    /* Say whether to bring up link for this pkt */
-    int  (*active_pkt) __P((u_char *pkt, int len));
-};
-
-/* Table of pointers to supported protocols */
-extern struct protent *protocols[];
-
-/*
- * This struct contains pointers to a set of procedures for
- * doing operations on a "channel".  A channel provides a way
- * to send and receive PPP packets - the canonical example is
- * a serial port device in PPP line discipline (or equivalently
- * with PPP STREAMS modules pushed onto it).
- */
-struct channel {
-	/* set of options for this channel */
-	option_t *options;
-	/* find and process a per-channel options file */
-	void (*process_extra_options) __P((void));
-	/* check all the options that have been given */
-	void (*check_options) __P((void));
-	/* get the channel ready to do PPP, return a file descriptor */
-	int  (*connect) __P((void));
-	/* we're finished with the channel */
-	void (*disconnect) __P((void));
-	/* put the channel into PPP `mode' */
-	int  (*establish_ppp) __P((int));
-	/* take the channel out of PPP `mode', restore loopback if demand */
-	void (*disestablish_ppp) __P((int));
-	/* set the transmit-side PPP parameters of the channel */
-	void (*send_config) __P((int, u_int32_t, int, int));
-	/* set the receive-side PPP parameters of the channel */
-	void (*recv_config) __P((int, u_int32_t, int, int));
-	/* cleanup on error or normal exit */
-	void (*cleanup) __P((void));
-	/* close the device, called in children after fork */
-	void (*close) __P((void));
-};
-
-extern struct channel *the_channel;
-
-#define ppp_send_config(unit, mtu, accm, pc, acc)			 \
-do {									 \
-	if (the_channel->send_config)					 \
-		(*the_channel->send_config)((mtu), (accm), (pc), (acc)); \
-} while (0)
-
-#define ppp_recv_config(unit, mtu, accm, pc, acc)			 \
-do {									 \
-	if (the_channel->send_config)					 \
-		(*the_channel->recv_config)((mtu), (accm), (pc), (acc)); \
-} while (0)
-
-/*
- * Prototypes.
- */
-
-/* Procedures exported from main.c. */
-void set_ifunit __P((int));	/* set stuff that depends on ifunit */
-void detach __P((void));	/* Detach from controlling tty */
-void die __P((int));		/* Cleanup and exit */
-void quit __P((void));		/* like die(1) */
-void novm __P((char *));	/* Say we ran out of memory, and die */
-void timeout __P((void (*func)(void *), void *arg, int s, int us));
-				/* Call func(arg) after s.us seconds */
-void untimeout __P((void (*func)(void *), void *arg));
-				/* Cancel call to func(arg) */
-void record_child __P((int, char *, void (*) (void *), void *));
-int  device_script __P((char *cmd, int in, int out, int dont_wait));
-				/* Run `cmd' with given stdin and stdout */
-pid_t run_program __P((char *prog, char **args, int must_exist,
-		       void (*done)(void *), void *arg));
-				/* Run program prog with args in child */
-void reopen_log __P((void));	/* (re)open the connection to syslog */
-void update_link_stats __P((int)); /* Get stats at link termination */
-void script_setenv __P((char *, char *, int));	/* set script env var */
-void script_unsetenv __P((char *));		/* unset script env var */
-void new_phase __P((int));	/* signal start of new phase */
-void add_notifier __P((struct notifier **, notify_func, void *));
-void remove_notifier __P((struct notifier **, notify_func, void *));
-void notify __P((struct notifier *, int));
-
-/* Procedures exported from tty.c. */
-void tty_init __P((void));
-
-/* Procedures exported from utils.c. */
-void log_packet __P((u_char *, int, char *, int));
-				/* Format a packet and log it with syslog */
-void print_string __P((char *, int,  void (*) (void *, char *, ...),
-		void *));	/* Format a string for output */
-int slprintf __P((char *, int, char *, ...));		/* sprintf++ */
-int vslprintf __P((char *, int, char *, va_list));	/* vsprintf++ */
-size_t strlcpy __P((char *, const char *, size_t));	/* safe strcpy */
-size_t strlcat __P((char *, const char *, size_t));	/* safe strncpy */
-void dbglog __P((char *, ...));	/* log a debug message */
-void info __P((char *, ...));	/* log an informational message */
-void notice __P((char *, ...));	/* log a notice-level message */
-void warn __P((char *, ...));	/* log a warning message */
-void error __P((char *, ...));	/* log an error message */
-void fatal __P((char *, ...));	/* log an error message and die(1) */
-void init_pr_log __P((char *, int));	/* initialize for using pr_log */
-void pr_log __P((void *, char *, ...));	/* printer fn, output to syslog */
-void end_pr_log __P((void));	/* finish up after using pr_log */
-
-/* Procedures exported from auth.c */
-void link_required __P((int));	  /* we are starting to use the link */
-void link_terminated __P((int));  /* we are finished with the link */
-void link_down __P((int));	  /* the LCP layer has left the Opened state */
-void link_established __P((int)); /* the link is up; authenticate now */
-void start_networks __P((void));  /* start all the network control protos */
-void np_up __P((int, int));	  /* a network protocol has come up */
-void np_down __P((int, int));	  /* a network protocol has gone down */
-void np_finished __P((int, int)); /* a network protocol no longer needs link */
-void auth_peer_fail __P((int, int));
-				/* peer failed to authenticate itself */
-void auth_peer_success __P((int, int, char *, int));
-				/* peer successfully authenticated itself */
-void auth_withpeer_fail __P((int, int));
-				/* we failed to authenticate ourselves */
-void auth_withpeer_success __P((int, int));
-				/* we successfully authenticated ourselves */
-void auth_check_options __P((void));
-				/* check authentication options supplied */
-void auth_reset __P((int));	/* check what secrets we have */
-int  check_passwd __P((int, char *, int, char *, int, char **));
-				/* Check peer-supplied username/password */
-int  get_secret __P((int, char *, char *, char *, int *, int));
-				/* get "secret" for chap */
-int  auth_ip_addr __P((int, u_int32_t));
-				/* check if IP address is authorized */
-int  bad_ip_adrs __P((u_int32_t));
-				/* check if IP address is unreasonable */
-
-/* Procedures exported from demand.c */
-void demand_conf __P((void));	/* config interface(s) for demand-dial */
-void demand_block __P((void));	/* set all NPs to queue up packets */
-void demand_unblock __P((void)); /* set all NPs to pass packets */
-void demand_discard __P((void)); /* set all NPs to discard packets */
-void demand_rexmit __P((int));	/* retransmit saved frames for an NP */
-int  loop_chars __P((unsigned char *, int)); /* process chars from loopback */
-int  loop_frame __P((unsigned char *, int)); /* should we bring link up? */
-
-/* Procedures exported from multilink.c */
-void mp_check_options __P((void)); /* Check multilink-related options */
-int  mp_join_bundle __P((void));  /* join our link to an appropriate bundle */
-char *epdisc_to_str __P((struct epdisc *)); /* string from endpoint discrim. */
-int  str_to_epdisc __P((struct epdisc *, char *)); /* endpt disc. from str */
-
-/* Procedures exported from sys-*.c */
-void sys_init __P((void));	/* Do system-dependent initialization */
-void sys_cleanup __P((void));	/* Restore system state before exiting */
-int  sys_check_options __P((void)); /* Check options specified */
-void sys_close __P((void));	/* Clean up in a child before execing */
-int  ppp_available __P((void));	/* Test whether ppp kernel support exists */
-int  get_pty __P((int *, int *, char *, int));	/* Get pty master/slave */
-int  open_ppp_loopback __P((void)); /* Open loopback for demand-dialling */
-int  tty_establish_ppp __P((int));  /* Turn serial port into a ppp interface */
-void tty_disestablish_ppp __P((int)); /* Restore port to normal operation */
-void make_new_bundle __P((int, int, int, int)); /* Create new bundle */
-int  bundle_attach __P((int));	/* Attach link to existing bundle */
-void cfg_bundle __P((int, int, int, int)); /* Configure existing bundle */
-void clean_check __P((void));	/* Check if line was 8-bit clean */
-void set_up_tty __P((int, int)); /* Set up port's speed, parameters, etc. */
-void restore_tty __P((int));	/* Restore port's original parameters */
-void setdtr __P((int, int));	/* Raise or lower port's DTR line */
-void output __P((int, u_char *, int)); /* Output a PPP packet */
-void wait_input __P((struct timeval *));
-				/* Wait for input, with timeout */
-void add_fd __P((int));		/* Add fd to set to wait for */
-void remove_fd __P((int));	/* Remove fd from set to wait for */
-int  read_packet __P((u_char *)); /* Read PPP packet */
-int  get_loop_output __P((void)); /* Read pkts from loopback */
-void tty_send_config __P((int, u_int32_t, int, int));
-				/* Configure i/f transmit parameters */
-void tty_set_xaccm __P((ext_accm));
-				/* Set extended transmit ACCM */
-void tty_recv_config __P((int, u_int32_t, int, int));
-				/* Configure i/f receive parameters */
-int  ccp_test __P((int, u_char *, int, int));
-				/* Test support for compression scheme */
-void ccp_flags_set __P((int, int, int));
-				/* Set kernel CCP state */
-int  ccp_fatal_error __P((int)); /* Test for fatal decomp error in kernel */
-int  get_idle_time __P((int, struct ppp_idle *));
-				/* Find out how long link has been idle */
-int  get_ppp_stats __P((int, struct pppd_stats *));
-				/* Return link statistics */
-void netif_set_mtu __P((int, int)); /* Set PPP interface MTU */
-int  sifvjcomp __P((int, int, int, int));
-				/* Configure VJ TCP header compression */
-int  sifup __P((int));		/* Configure i/f up for one protocol */
-int  sifnpmode __P((int u, int proto, enum NPmode mode));
-				/* Set mode for handling packets for proto */
-int  sifdown __P((int));	/* Configure i/f down for one protocol */
-int  sifaddr __P((int, u_int32_t, u_int32_t, u_int32_t));
-				/* Configure IPv4 addresses for i/f */
-int  cifaddr __P((int, u_int32_t, u_int32_t));
-				/* Reset i/f IP addresses */
-#ifdef INET6
-int  sif6addr __P((int, eui64_t, eui64_t));
-				/* Configure IPv6 addresses for i/f */
-int  cif6addr __P((int, eui64_t, eui64_t));
-				/* Remove an IPv6 address from i/f */
-#endif
-int  sifdefaultroute __P((int, u_int32_t, u_int32_t));
-				/* Create default route through i/f */
-int  cifdefaultroute __P((int, u_int32_t, u_int32_t));
-				/* Delete default route through i/f */
-int  sifproxyarp __P((int, u_int32_t));
-				/* Add proxy ARP entry for peer */
-int  cifproxyarp __P((int, u_int32_t));
-				/* Delete proxy ARP entry for peer */
-u_int32_t GetMask __P((u_int32_t)); /* Get appropriate netmask for address */
-int  lock __P((char *));	/* Create lock file for device */
-int  relock __P((int));		/* Rewrite lock file with new pid */
-void unlock __P((void));	/* Delete previously-created lock file */
-void logwtmp __P((const char *, const char *, const char *));
-				/* Write entry to wtmp file */
-int  get_host_seed __P((void));	/* Get host-dependent random number seed */
-int  have_route_to __P((u_int32_t)); /* Check if route to addr exists */
-#ifdef PPP_FILTER
-int  set_filters __P((struct bpf_program *pass, struct bpf_program *active));
-				/* Set filter programs in kernel */
-#endif
-#ifdef IPX_CHANGE
-int  sipxfaddr __P((int, unsigned long, unsigned char *));
-int  cipxfaddr __P((int));
-#endif
-int  get_if_hwaddr __P((u_char *addr, char *name));
-char *get_first_ethernet __P((void));
-
-/* Procedures exported from options.c */
-int  parse_args __P((int argc, char **argv));
-				/* Parse options from arguments given */
-int  options_from_file __P((char *filename, int must_exist, int check_prot,
-			    int privileged));
-				/* Parse options from an options file */
-int  options_from_user __P((void)); /* Parse options from user's .ppprc */
-int  options_for_tty __P((void)); /* Parse options from /etc/ppp/options.tty */
-int  options_from_list __P((struct wordlist *, int privileged));
-				/* Parse options from a wordlist */
-int  getword __P((FILE *f, char *word, int *newlinep, char *filename));
-				/* Read a word from a file */
-void option_error __P((char *fmt, ...));
-				/* Print an error message about an option */
-int int_option __P((char *, int *));
-				/* Simplified number_option for decimal ints */
-void add_options __P((option_t *)); /* Add extra options */
-void check_options __P((void));	/* check values after all options parsed */
-int  override_value __P((const char *, int, const char *));
-				/* override value if permitted by priority */
-void print_options __P((void (*) __P((void *, char *, ...)), void *));
-				/* print out values of all options */
-
-int parse_dotted_ip __P((char *, u_int32_t *));
-
-/*
- * Hooks to enable plugins to change various things.
- */
-extern int (*new_phase_hook) __P((int));
-extern int (*idle_time_hook) __P((struct ppp_idle *));
-extern int (*holdoff_hook) __P((void));
-extern int (*pap_check_hook) __P((void));
-extern int (*pap_auth_hook) __P((char *user, char *passwd, char **msgp,
-				 struct wordlist **paddrs,
-				 struct wordlist **popts));
-extern void (*pap_logout_hook) __P((void));
-extern int (*pap_passwd_hook) __P((char *user, char *passwd));
-extern void (*ip_up_hook) __P((void));
-extern void (*ip_down_hook) __P((void));
-extern void (*ip_choose_hook) __P((u_int32_t *));
-
-/*
- * Inline versions of get/put char/short/long.
- * Pointer is advanced; we assume that both arguments
- * are lvalues and will already be in registers.
- * cp MUST be u_char *.
- */
-#define GETCHAR(c, cp) { \
-	(c) = *(cp)++; \
-}
-#define PUTCHAR(c, cp) { \
-	*(cp)++ = (u_char) (c); \
-}
-
-
-#define GETSHORT(s, cp) { \
-	(s) = *(cp)++ << 8; \
-	(s) |= *(cp)++; \
-}
-#define PUTSHORT(s, cp) { \
-	*(cp)++ = (u_char) ((s) >> 8); \
-	*(cp)++ = (u_char) (s); \
-}
-
-#define GETLONG(l, cp) { \
-	(l) = *(cp)++ << 8; \
-	(l) |= *(cp)++; (l) <<= 8; \
-	(l) |= *(cp)++; (l) <<= 8; \
-	(l) |= *(cp)++; \
-}
-#define PUTLONG(l, cp) { \
-	*(cp)++ = (u_char) ((l) >> 24); \
-	*(cp)++ = (u_char) ((l) >> 16); \
-	*(cp)++ = (u_char) ((l) >> 8); \
-	*(cp)++ = (u_char) (l); \
-}
-
-#define INCPTR(n, cp)	((cp) += (n))
-#define DECPTR(n, cp)	((cp) -= (n))
-
-/*
- * System dependent definitions for user-level 4.3BSD UNIX implementation.
- */
-
-#define TIMEOUT(r, f, t)	timeout((r), (f), (t), 0)
-#define UNTIMEOUT(r, f)		untimeout((r), (f))
-
-#define BCOPY(s, d, l)		memcpy(d, s, l)
-#define BZERO(s, n)		memset(s, 0, n)
-
-#define PRINTMSG(m, l)		{ info("Remote message: %0.*v", l, m); }
-
-/*
- * MAKEHEADER - Add Header fields to a packet.
- */
-#define MAKEHEADER(p, t) { \
-    PUTCHAR(PPP_ALLSTATIONS, p); \
-    PUTCHAR(PPP_UI, p); \
-    PUTSHORT(t, p); }
-
-/*
- * Exit status values.
- */
-#define EXIT_OK			0
-#define EXIT_FATAL_ERROR	1
-#define EXIT_OPTION_ERROR	2
-#define EXIT_NOT_ROOT		3
-#define EXIT_NO_KERNEL_SUPPORT	4
-#define EXIT_USER_REQUEST	5
-#define EXIT_LOCK_FAILED	6
-#define EXIT_OPEN_FAILED	7
-#define EXIT_CONNECT_FAILED	8
-#define EXIT_PTYCMD_FAILED	9
-#define EXIT_NEGOTIATION_FAILED	10
-#define EXIT_PEER_AUTH_FAILED	11
-#define EXIT_IDLE_TIMEOUT	12
-#define EXIT_CONNECT_TIME	13
-#define EXIT_CALLBACK		14
-#define EXIT_PEER_DEAD		15
-#define EXIT_HANGUP		16
-#define EXIT_LOOPBACK		17
-#define EXIT_INIT_FAILED	18
-#define EXIT_AUTH_TOPEER_FAILED	19
-
-/*
- * Debug macros.  Slightly useful for finding bugs in pppd, not particularly
- * useful for finding out why your connection isn't being established.
- */
-#ifdef DEBUGALL
-#define DEBUGMAIN	1
-#define DEBUGFSM	1
-#define DEBUGLCP	1
-#define DEBUGIPCP	1
-#define DEBUGIPV6CP	1
-#define DEBUGUPAP	1
-#define DEBUGCHAP	1
-#endif
-
-#ifndef LOG_PPP			/* we use LOG_LOCAL2 for syslog by default */
-#if defined(DEBUGMAIN) || defined(DEBUGFSM) || defined(DEBUGSYS) \
-  || defined(DEBUGLCP) || defined(DEBUGIPCP) || defined(DEBUGUPAP) \
-  || defined(DEBUGCHAP) || defined(DEBUG) || defined(DEBUGIPV6CP)
-#define LOG_PPP LOG_LOCAL2
-#else
-#define LOG_PPP LOG_DAEMON
-#endif
-#endif /* LOG_PPP */
-
-#ifdef DEBUGMAIN
-#define MAINDEBUG(x)	if (debug) dbglog x
-#else
-#define MAINDEBUG(x)
-#endif
-
-#ifdef DEBUGSYS
-#define SYSDEBUG(x)	if (debug) dbglog x
-#else
-#define SYSDEBUG(x)
-#endif
-
-#ifdef DEBUGFSM
-#define FSMDEBUG(x)	if (debug) dbglog x
-#else
-#define FSMDEBUG(x)
-#endif
-
-#ifdef DEBUGLCP
-#define LCPDEBUG(x)	if (debug) dbglog x
-#else
-#define LCPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPCP
-#define IPCPDEBUG(x)	if (debug) dbglog x
-#else
-#define IPCPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPV6CP
-#define IPV6CPDEBUG(x)  if (debug) dbglog x
-#else
-#define IPV6CPDEBUG(x)
-#endif
-
-#ifdef DEBUGUPAP
-#define UPAPDEBUG(x)	if (debug) dbglog x
-#else
-#define UPAPDEBUG(x)
-#endif
-
-#ifdef DEBUGCHAP
-#define CHAPDEBUG(x)	if (debug) dbglog x
-#else
-#define CHAPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPXCP
-#define IPXCPDEBUG(x)	if (debug) dbglog x
-#else
-#define IPXCPDEBUG(x)
-#endif
-
-#ifndef SIGTYPE
-#if defined(sun) || defined(SYSV) || defined(POSIX_SOURCE)
-#define SIGTYPE void
-#else
-#define SIGTYPE int
-#endif /* defined(sun) || defined(SYSV) || defined(POSIX_SOURCE) */
-#endif /* SIGTYPE */
-
-#ifndef MIN
-#define MIN(a, b)	((a) < (b)? (a): (b))
-#endif
-#ifndef MAX
-#define MAX(a, b)	((a) > (b)? (a): (b))
-#endif
-
-#endif /* __PPP_H__ */
diff --git a/mdk-stage1/ppp/pppd/sys-linux.c b/mdk-stage1/ppp/pppd/sys-linux.c
deleted file mode 100644
index d341bb3de..000000000
--- a/mdk-stage1/ppp/pppd/sys-linux.c
+++ /dev/null
@@ -1,2672 +0,0 @@
-/*
- * sys-linux.c - System-dependent procedures for setting up
- * PPP interfaces on Linux systems
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <sys/errno.h>
-#include <sys/file.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-#include <sys/sysmacros.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <syslog.h>
-#include <string.h>
-#include <time.h>
-#include <memory.h>
-#include <utmp.h>
-#include <mntent.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <ctype.h>
-#include <termios.h>
-#include <unistd.h>
-
-/* This is in netdevice.h. However, this compile will fail miserably if
-   you attempt to include netdevice.h because it has so many references
-   to __memcpy functions which it should not attempt to do. So, since I
-   really don't use it, but it must be defined, define it now. */
-
-#ifndef MAX_ADDR_LEN
-#define MAX_ADDR_LEN 7
-#endif
-
-#if __GLIBC__ >= 2
-#include <asm/types.h>		/* glibc 2 conflicts with linux/types.h */
-#include <net/if.h>
-#include <net/if_arp.h>
-#include <net/route.h>
-#include <netinet/if_ether.h>
-#else
-#include <linux/types.h>
-#include <linux/if.h>
-#include <linux/if_arp.h>
-#include <linux/route.h>
-#include <linux/if_ether.h>
-#endif
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include <linux/ppp_defs.h>
-#include <linux/if_ppp.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipcp.h"
-
-#ifdef IPX_CHANGE
-#include "ipxcp.h"
-#if __GLIBC__ >= 2 && \
-    !(defined(__powerpc__) && __GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
-#include <netipx/ipx.h>
-#else
-#include <linux/ipx.h>
-#endif
-#endif /* IPX_CHANGE */
-
-#ifdef PPP_FILTER
-#include <net/bpf.h>
-#include <linux/filter.h>
-#endif /* PPP_FILTER */
-
-#ifdef LOCKLIB
-#include <sys/locks.h>
-#endif
-
-#ifdef INET6
-#ifndef _LINUX_IN6_H
-/*
- *    This is in linux/include/net/ipv6.h.
- */
-
-struct in6_ifreq {
-    struct in6_addr ifr6_addr;
-    __u32 ifr6_prefixlen;
-    unsigned int ifr6_ifindex;
-};
-#endif
-
-#define IN6_LLADDR_FROM_EUI64(sin6, eui64) do {			\
-	memset(&sin6.s6_addr, 0, sizeof(struct in6_addr));	\
-	sin6.s6_addr16[0] = htons(0xfe80); 			\
-	eui64_copy(eui64, sin6.s6_addr32[2]);			\
-	} while (0)
-
-#endif /* INET6 */
-
-/* We can get an EIO error on an ioctl if the modem has hung up */
-#define ok_error(num) ((num)==EIO)
-
-static int tty_disc = N_TTY;	/* The TTY discipline */
-static int ppp_disc = N_PPP;	/* The PPP discpline */
-static int initfdflags = -1;	/* Initial file descriptor flags for fd */
-static int ppp_fd = -1;		/* fd which is set to PPP discipline */
-static int sock_fd = -1;	/* socket for doing interface ioctls */
-static int slave_fd = -1;
-static int master_fd = -1;
-#ifdef INET6
-static int sock6_fd = -1;
-#endif /* INET6 */
-static int ppp_dev_fd = -1;	/* fd for /dev/ppp (new style driver) */
-static int chindex;		/* channel index (new style driver) */
-
-static fd_set in_fds;		/* set of fds that wait_input waits for */
-static int max_in_fd;		/* highest fd set in in_fds */
-
-static int has_proxy_arp       = 0;
-static int driver_version      = 0;
-static int driver_modification = 0;
-static int driver_patch        = 0;
-static int driver_is_old       = 0;
-static int restore_term        = 0;	/* 1 => we've munged the terminal */
-static struct termios inittermios;	/* Initial TTY termios */
-
-static int new_style_driver = 0;
-
-static char loop_name[20];
-static unsigned char inbuf[512]; /* buffer for chars read from loopback */
-
-static int	if_is_up;	/* Interface has been marked up */
-static u_int32_t default_route_gateway;	/* Gateway for default route added */
-static u_int32_t proxy_arp_addr;	/* Addr for proxy arp entry added */
-static char proxy_arp_dev[16];		/* Device for proxy arp entry */
-static u_int32_t our_old_addr;		/* for detecting address changes */
-static int	dynaddr_set;		/* 1 if ip_dynaddr set */
-static int	looped;			/* 1 if using loop */
-static int	link_mtu;		/* mtu for the link (not bundle) */
-
-static struct utsname utsname;	/* for the kernel version */
-static int kernel_version;
-#define KVERSION(j,n,p)	((j)*1000000 + (n)*1000 + (p))
-
-#define MAX_IFS		100
-
-#define FLAGS_GOOD (IFF_UP          | IFF_BROADCAST)
-#define FLAGS_MASK (IFF_UP          | IFF_BROADCAST | \
-		    IFF_POINTOPOINT | IFF_LOOPBACK  | IFF_NOARP)
-
-#define SIN_ADDR(x)	(((struct sockaddr_in *) (&(x)))->sin_addr.s_addr)
-
-/* Prototypes for procedures local to this file. */
-static int get_flags (int fd);
-static void set_flags (int fd, int flags);
-static int translate_speed (int bps);
-static int baud_rate_of (int speed);
-static void close_route_table (void);
-static int open_route_table (void);
-static int read_route_table (struct rtentry *rt);
-static int defaultroute_exists (struct rtentry *rt);
-static int get_ether_addr (u_int32_t ipaddr, struct sockaddr *hwaddr,
-			   char *name, int namelen);
-static void decode_version (char *buf, int *version, int *mod, int *patch);
-static int set_kdebugflag(int level);
-static int ppp_registered(void);
-static int make_ppp_unit(void);
-static void restore_loop(void);	/* Transfer ppp unit back to loopback */
-
-extern u_char	inpacket_buf[];	/* borrowed from main.c */
-
-/*
- * SET_SA_FAMILY - set the sa_family field of a struct sockaddr,
- * if it exists.
- */
-
-#define SET_SA_FAMILY(addr, family)			\
-    memset ((char *) &(addr), '\0', sizeof(addr));	\
-    addr.sa_family = (family);
-
-/*
- * Determine if the PPP connection should still be present.
- */
-
-extern int hungup;
-
-/* new_fd is the fd of a tty */
-static void set_ppp_fd (int new_fd)
-{
-	SYSDEBUG ((LOG_DEBUG, "setting ppp_fd to %d\n", new_fd));
-	ppp_fd = new_fd;
-	if (!new_style_driver)
-		ppp_dev_fd = new_fd;
-}
-
-static int still_ppp(void)
-{
-	if (new_style_driver)
-		return !hungup && ppp_fd >= 0;
-	if (!hungup || ppp_fd == slave_fd)
-		return 1;
-	if (slave_fd >= 0) {
-		set_ppp_fd(slave_fd);
-		return 1;
-	}
-	return 0;
-}
-
-/********************************************************************
- *
- * Functions to read and set the flags value in the device driver
- */
-
-static int get_flags (int fd)
-{    
-    int flags;
-
-    if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &flags) < 0) {
-	if ( ok_error (errno) )
-	    flags = 0;
-	else
-	    fatal("ioctl(PPPIOCGFLAGS): %m");
-    }
-
-    SYSDEBUG ((LOG_DEBUG, "get flags = %x\n", flags));
-    return flags;
-}
-
-/********************************************************************/
-
-static void set_flags (int fd, int flags)
-{    
-    SYSDEBUG ((LOG_DEBUG, "set flags = %x\n", flags));
-
-    if (ioctl(fd, PPPIOCSFLAGS, (caddr_t) &flags) < 0) {
-	if (! ok_error (errno) )
-	    fatal("ioctl(PPPIOCSFLAGS, %x): %m", flags, errno);
-    }
-}
-
-/********************************************************************
- *
- * sys_init - System-dependent initialization.
- */
-
-void sys_init(void)
-{
-    int flags;
-
-    if (new_style_driver) {
-	ppp_dev_fd = open("/dev/ppp", O_RDWR);
-	if (ppp_dev_fd < 0)
-	    fatal("Couldn't open /dev/ppp: %m");
-	flags = fcntl(ppp_dev_fd, F_GETFL);
-	if (flags == -1
-	    || fcntl(ppp_dev_fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	    warn("Couldn't set /dev/ppp to nonblock: %m");
-    }
-
-    /* Get an internet socket for doing socket ioctls. */
-    sock_fd = socket(AF_INET, SOCK_DGRAM, 0);
-    if (sock_fd < 0)
-	fatal("Couldn't create IP socket: %m(%d)", errno);
-
-#ifdef INET6
-    sock6_fd = socket(AF_INET6, SOCK_DGRAM, 0);
-    if (sock6_fd < 0)
-	sock6_fd = -errno;	/* save errno for later */
-#endif
-
-    FD_ZERO(&in_fds);
-    max_in_fd = 0;
-}
-
-/********************************************************************
- *
- * sys_cleanup - restore any system state we modified before exiting:
- * mark the interface down, delete default route and/or proxy arp entry.
- * This shouldn't call die() because it's called from die().
- */
-
-void sys_cleanup(void)
-{
-/*
- * Take down the device
- */
-    if (if_is_up) {
-	if_is_up = 0;
-	sifdown(0);
-    }
-/*
- * Delete any routes through the device.
- */
-    if (default_route_gateway != 0)
-	cifdefaultroute(0, 0, default_route_gateway);
-
-    if (has_proxy_arp)
-	cifproxyarp(0, proxy_arp_addr);
-}
-
-/********************************************************************
- *
- * sys_close - Clean up in a child process before execing.
- */
-void
-sys_close(void)
-{
-    if (new_style_driver)
-	close(ppp_dev_fd);
-    if (sock_fd >= 0)
-	close(sock_fd);
-    if (slave_fd >= 0)
-	close(slave_fd);
-    if (master_fd >= 0)
-	close(master_fd);
-    closelog();
-}
-
-/********************************************************************
- *
- * set_kdebugflag - Define the debugging level for the kernel
- */
-
-static int set_kdebugflag (int requested_level)
-{
-    if (new_style_driver && ifunit < 0)
-	return 1;
-    if (ioctl(ppp_dev_fd, PPPIOCSDEBUG, &requested_level) < 0) {
-	if ( ! ok_error (errno) )
-	    error("ioctl(PPPIOCSDEBUG): %m");
-	return (0);
-    }
-    SYSDEBUG ((LOG_INFO, "set kernel debugging level to %d",
-		requested_level));
-    return (1);
-}
-
-/********************************************************************
- *
- * tty_establish_ppp - Turn the serial port into a ppp interface.
- */
-
-int tty_establish_ppp (int tty_fd)
-{
-    int x;
-    int fd = -1;
-
-/*
- * Ensure that the tty device is in exclusive mode.
- */
-    if (ioctl(tty_fd, TIOCEXCL, 0) < 0) {
-	if ( ! ok_error ( errno ))
-	    warn("Couldn't make tty exclusive: %m");
-    }
-/*
- * Demand mode - prime the old ppp device to relinquish the unit.
- */
-    if (!new_style_driver && looped
-	&& ioctl(slave_fd, PPPIOCXFERUNIT, 0) < 0) {
-	error("ioctl(transfer ppp unit): %m");
-	return -1;
-    }
-/*
- * Set the current tty to the PPP discpline
- */
-
-#ifndef N_SYNC_PPP
-#define N_SYNC_PPP 14
-#endif
-    ppp_disc = (new_style_driver && sync_serial)? N_SYNC_PPP: N_PPP;
-    if (ioctl(tty_fd, TIOCSETD, &ppp_disc) < 0) {
-	if ( ! ok_error (errno) ) {
-	    error("Couldn't set tty to PPP discipline: %m");
-	    return -1;
-	}
-    }
-
-    if (new_style_driver) {
-	/* Open another instance of /dev/ppp and connect the channel to it */
-	int flags;
-
-	if (ioctl(tty_fd, PPPIOCGCHAN, &chindex) == -1) {
-	    error("Couldn't get channel number: %m");
-	    goto err;
-	}
-	dbglog("using channel %d", chindex);
-	fd = open("/dev/ppp", O_RDWR);
-	if (fd < 0) {
-	    error("Couldn't reopen /dev/ppp: %m");
-	    goto err;
-	}
-	if (ioctl(fd, PPPIOCATTCHAN, &chindex) < 0) {
-	    error("Couldn't attach to channel %d: %m", chindex);
-	    goto err_close;
-	}
-	flags = fcntl(fd, F_GETFL);
-	if (flags == -1 || fcntl(fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	    warn("Couldn't set /dev/ppp (channel) to nonblock: %m");
-	set_ppp_fd(fd);
-
-	if (!looped)
-	    ifunit = -1;
-	if (!looped && !multilink) {
-	    /*
-	     * Create a new PPP unit.
-	     */
-	    if (make_ppp_unit() < 0)
-		goto err_close;
-	}
-
-	if (looped)
-	    set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) & ~SC_LOOP_TRAFFIC);
-
-	if (!multilink) {
-	    add_fd(ppp_dev_fd);
-	    if (ioctl(fd, PPPIOCCONNECT, &ifunit) < 0) {
-		error("Couldn't attach to PPP unit %d: %m", ifunit);
-		goto err_close;
-	    }
-	}
-
-    } else {
-	/*
-	 * Old-style driver: find out which interface we were given.
-	 */
-	set_ppp_fd (tty_fd);
-	if (ioctl(tty_fd, PPPIOCGUNIT, &x) < 0) {	
-	    if (ok_error (errno))
-		goto err;
-	    fatal("ioctl(PPPIOCGUNIT): %m(%d)", errno);
-	}
-	/* Check that we got the same unit again. */
-	if (looped && x != ifunit)
-	    fatal("transfer_ppp failed: wanted unit %d, got %d", ifunit, x);
-	ifunit = x;
-
-	/*
-	 * Fetch the initial file flags and reset blocking mode on the file.
-	 */
-	initfdflags = fcntl(tty_fd, F_GETFL);
-	if (initfdflags == -1 ||
-	    fcntl(tty_fd, F_SETFL, initfdflags | O_NONBLOCK) == -1) {
-	    if ( ! ok_error (errno))
-		warn("Couldn't set device to non-blocking mode: %m");
-	}
-    }
-
-    looped = 0;
-
-    /*
-     * Enable debug in the driver if requested.
-     */
-    if (!looped)
-	set_kdebugflag (kdebugflag);
-
-#define SC_RCVB	(SC_RCV_B7_0 | SC_RCV_B7_1 | SC_RCV_EVNP | SC_RCV_ODDP)
-#define SC_LOGB	(SC_DEBUG | SC_LOG_INPKT | SC_LOG_OUTPKT | SC_LOG_RAWIN \
-		 | SC_LOG_FLUSH)
-
-    set_flags(ppp_fd, ((get_flags(ppp_fd) & ~(SC_RCVB | SC_LOGB))
-		       | ((kdebugflag * SC_DEBUG) & SC_LOGB)));
-
-    SYSDEBUG ((LOG_NOTICE, "Using version %d.%d.%d of PPP driver",
-	    driver_version, driver_modification, driver_patch));
-
-    return ppp_fd;
-
- err_close:
-    close(fd);
- err:
-    if (ioctl(tty_fd, TIOCSETD, &tty_disc) < 0 && !ok_error(errno))
-	warn("Couldn't reset tty to normal line discipline: %m");
-    return -1;
-}
-
-/********************************************************************
- *
- * tty_disestablish_ppp - Restore the serial port to normal operation,
- * and reconnect the ppp unit to the loopback if in demand mode.
- * This shouldn't call die() because it's called from die().
- */
-
-void tty_disestablish_ppp(int tty_fd)
-{
-    if (demand)
-	restore_loop();
-    if (!hungup) {
-/*
- * Flush the tty output buffer so that the TIOCSETD doesn't hang.
- */
-	if (tcflush(tty_fd, TCIOFLUSH) < 0)
-	    warn("tcflush failed: %m");
-/*
- * Restore the previous line discipline
- */
-	if (ioctl(tty_fd, TIOCSETD, &tty_disc) < 0) {
-	    if ( ! ok_error (errno))
-		error("ioctl(TIOCSETD, N_TTY): %m");
-	}
-	
-	if (ioctl(tty_fd, TIOCNXCL, 0) < 0) {
-	    if ( ! ok_error (errno))
-		warn("ioctl(TIOCNXCL): %m(%d)", errno);
-	}
-
-	/* Reset non-blocking mode on fd. */
-	if (initfdflags != -1 && fcntl(tty_fd, F_SETFL, initfdflags) < 0) {
-	    if ( ! ok_error (errno))
-		warn("Couldn't restore device fd flags: %m");
-	}
-    }
-    initfdflags = -1;
-
-    if (new_style_driver) {
-	close(ppp_fd);
-	ppp_fd = -1;
-	if (!looped && ifunit >= 0 && ioctl(ppp_dev_fd, PPPIOCDETACH) < 0)
-	    error("Couldn't release PPP unit: %m");
-	if (!multilink)
-	    remove_fd(ppp_dev_fd);
-    }
-}
-
-/*
- * make_ppp_unit - make a new ppp unit for ppp_dev_fd.
- * Assumes new_style_driver.
- */
-static int make_ppp_unit()
-{
-	int x;
-
-	ifunit = req_unit;
-	x = ioctl(ppp_dev_fd, PPPIOCNEWUNIT, &ifunit);
-	if (x < 0 && req_unit >= 0 && errno == EEXIST) {
-		warn("Couldn't allocate PPP unit %d as it is already in use");
-		ifunit = -1;
-		x = ioctl(ppp_dev_fd, PPPIOCNEWUNIT, &ifunit);
-	}
-	if (x < 0)
-		error("Couldn't create new ppp unit: %m");
-	return x;
-}
-
-/*
- * cfg_bundle - configure the existing bundle.
- * Used in demand mode.
- */
-void cfg_bundle(int mrru, int mtru, int rssn, int tssn)
-{
-	int flags;
-
-	if (!new_style_driver)
-		return;
-
-	/* set the mrru, mtu and flags */
-	if (ioctl(ppp_dev_fd, PPPIOCSMRRU, &mrru) < 0)
-		error("Couldn't set MRRU: %m");
-	flags = get_flags(ppp_dev_fd);
-	flags &= ~(SC_MP_SHORTSEQ | SC_MP_XSHORTSEQ);
-	flags |= (rssn? SC_MP_SHORTSEQ: 0) | (tssn? SC_MP_XSHORTSEQ: 0)
-		| (mrru? SC_MULTILINK: 0);
-
-	set_flags(ppp_dev_fd, flags);
-
-	/* connect up the channel */
-	if (ioctl(ppp_fd, PPPIOCCONNECT, &ifunit) < 0)
-		fatal("Couldn't attach to PPP unit %d: %m", ifunit);
-	add_fd(ppp_dev_fd);
-}
-
-/*
- * make_new_bundle - create a new PPP unit (i.e. a bundle)
- * and connect our channel to it.  This should only get called
- * if `multilink' was set at the time establish_ppp was called.
- * In demand mode this uses our existing bundle instead of making
- * a new one.
- */
-void make_new_bundle(int mrru, int mtru, int rssn, int tssn)
-{
-	if (!new_style_driver)
-		return;
-
-	/* make us a ppp unit */
-	if (make_ppp_unit() < 0)
-		die(1);
-
-	/* set the mrru and flags */
-	cfg_bundle(mrru, mtru, rssn, tssn);
-}
-
-/*
- * bundle_attach - attach our link to a given PPP unit.
- * We assume the unit is controlled by another pppd.
- */
-int bundle_attach(int ifnum)
-{
-	if (!new_style_driver)
-		return -1;
-
-	if (ioctl(ppp_dev_fd, PPPIOCATTACH, &ifnum) < 0) {
-		if (errno == ENXIO)
-			return 0;	/* doesn't still exist */
-		fatal("Couldn't attach to interface unit %d: %m\n", ifnum);
-	}
-	if (ioctl(ppp_fd, PPPIOCCONNECT, &ifnum) < 0)
-		fatal("Couldn't connect to interface unit %d: %m", ifnum);
-	set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) | SC_MULTILINK);
-
-	ifunit = ifnum;
-	return 1;
-}
-
-/********************************************************************
- *
- * clean_check - Fetch the flags for the device and generate
- * appropriate error messages.
- */
-void clean_check(void)
-{
-    int x;
-    char *s;
-
-    if (still_ppp()) {
-	if (ioctl(ppp_fd, PPPIOCGFLAGS, (caddr_t) &x) == 0) {
-	    s = NULL;
-	    switch (~x & (SC_RCV_B7_0|SC_RCV_B7_1|SC_RCV_EVNP|SC_RCV_ODDP)) {
-	    case SC_RCV_B7_0:
-		s = "all had bit 7 set to 1";
-		break;
-		
-	    case SC_RCV_B7_1:
-		s = "all had bit 7 set to 0";
-		break;
-		
-	    case SC_RCV_EVNP:
-		s = "all had odd parity";
-		break;
-		
-	    case SC_RCV_ODDP:
-		s = "all had even parity";
-		break;
-	    }
-	    
-	    if (s != NULL) {
-		warn("Receive serial link is not 8-bit clean:");
-		warn("Problem: %s", s);
-	    }
-	}
-    }
-}
-	
-
-/*
- * List of valid speeds.
- */
-
-struct speed {
-    int speed_int, speed_val;
-} speeds[] = {
-#ifdef B50
-    { 50, B50 },
-#endif
-#ifdef B75
-    { 75, B75 },
-#endif
-#ifdef B110
-    { 110, B110 },
-#endif
-#ifdef B134
-    { 134, B134 },
-#endif
-#ifdef B150
-    { 150, B150 },
-#endif
-#ifdef B200
-    { 200, B200 },
-#endif
-#ifdef B300
-    { 300, B300 },
-#endif
-#ifdef B600
-    { 600, B600 },
-#endif
-#ifdef B1200
-    { 1200, B1200 },
-#endif
-#ifdef B1800
-    { 1800, B1800 },
-#endif
-#ifdef B2000
-    { 2000, B2000 },
-#endif
-#ifdef B2400
-    { 2400, B2400 },
-#endif
-#ifdef B3600
-    { 3600, B3600 },
-#endif
-#ifdef B4800
-    { 4800, B4800 },
-#endif
-#ifdef B7200
-    { 7200, B7200 },
-#endif
-#ifdef B9600
-    { 9600, B9600 },
-#endif
-#ifdef B19200
-    { 19200, B19200 },
-#endif
-#ifdef B38400
-    { 38400, B38400 },
-#endif
-#ifdef B57600
-    { 57600, B57600 },
-#endif
-#ifdef B76800
-    { 76800, B76800 },
-#endif
-#ifdef B115200
-    { 115200, B115200 },
-#endif
-#ifdef EXTA
-    { 19200, EXTA },
-#endif
-#ifdef EXTB
-    { 38400, EXTB },
-#endif
-#ifdef B230400
-    { 230400, B230400 },
-#endif
-#ifdef B460800
-    { 460800, B460800 },
-#endif
-#ifdef B921600
-    { 921600, B921600 },
-#endif
-    { 0, 0 }
-};
-
-/********************************************************************
- *
- * Translate from bits/second to a speed_t.
- */
-
-static int translate_speed (int bps)
-{
-    struct speed *speedp;
-
-    if (bps != 0) {
-	for (speedp = speeds; speedp->speed_int; speedp++) {
-	    if (bps == speedp->speed_int)
-		return speedp->speed_val;
-	}
-	warn("speed %d not supported", bps);
-    }
-    return 0;
-}
-
-/********************************************************************
- *
- * Translate from a speed_t to bits/second.
- */
-
-static int baud_rate_of (int speed)
-{
-    struct speed *speedp;
-    
-    if (speed != 0) {
-	for (speedp = speeds; speedp->speed_int; speedp++) {
-	    if (speed == speedp->speed_val)
-		return speedp->speed_int;
-	}
-    }
-    return 0;
-}
-
-/********************************************************************
- *
- * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
- * at the requested speed, etc.  If `local' is true, set CLOCAL
- * regardless of whether the modem option was specified.
- */
-
-void set_up_tty(int tty_fd, int local)
-{
-    int speed;
-    struct termios tios;
-
-    setdtr(tty_fd, 1);
-    if (tcgetattr(tty_fd, &tios) < 0) {
-	if (!ok_error(errno))
-	    fatal("tcgetattr: %m(%d)", errno);
-	return;
-    }
-    
-    if (!restore_term)
-	inittermios = tios;
-    
-    tios.c_cflag     &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
-    tios.c_cflag     |= CS8 | CREAD | HUPCL;
-
-    tios.c_iflag      = IGNBRK | IGNPAR;
-    tios.c_oflag      = 0;
-    tios.c_lflag      = 0;
-    tios.c_cc[VMIN]   = 1;
-    tios.c_cc[VTIME]  = 0;
-    
-    if (local || !modem)
-	tios.c_cflag ^= (CLOCAL | HUPCL);
-
-    switch (crtscts) {
-    case 1:
-	tios.c_cflag |= CRTSCTS;
-	break;
-
-    case -2:
-	tios.c_iflag     |= IXON | IXOFF;
-	tios.c_cc[VSTOP]  = 0x13;	/* DC3 = XOFF = ^S */
-	tios.c_cc[VSTART] = 0x11;	/* DC1 = XON  = ^Q */
-	break;
-
-    case -1:
-	tios.c_cflag &= ~CRTSCTS;
-	break;
-
-    default:
-	break;
-    }
-    
-    speed = translate_speed(inspeed);
-    if (speed) {
-	cfsetospeed (&tios, speed);
-	cfsetispeed (&tios, speed);
-    }
-/*
- * We can't proceed if the serial port speed is B0,
- * since that implies that the serial port is disabled.
- */
-    else {
-	speed = cfgetospeed(&tios);
-	if (speed == B0)
-	    fatal("Baud rate for %s is 0; need explicit baud rate", devnam);
-    }
-
-    if (tcsetattr(tty_fd, TCSAFLUSH, &tios) < 0)
-	if (!ok_error(errno))
-	    fatal("tcsetattr: %m");
-    
-    baud_rate    = baud_rate_of(speed);
-    restore_term = 1;
-}
-
-/********************************************************************
- *
- * setdtr - control the DTR line on the serial port.
- * This is called from die(), so it shouldn't call die().
- */
-
-void setdtr (int tty_fd, int on)
-{
-    int modembits = TIOCM_DTR;
-
-    ioctl(tty_fd, (on ? TIOCMBIS : TIOCMBIC), &modembits);
-}
-
-/********************************************************************
- *
- * restore_tty - restore the terminal to the saved settings.
- */
-
-void restore_tty (int tty_fd)
-{
-    if (restore_term) {
-	restore_term = 0;
-/*
- * Turn off echoing, because otherwise we can get into
- * a loop with the tty and the modem echoing to each other.
- * We presume we are the sole user of this tty device, so
- * when we close it, it will revert to its defaults anyway.
- */
-	if (!default_device)
-	    inittermios.c_lflag &= ~(ECHO | ECHONL);
-	
-	if (tcsetattr(tty_fd, TCSAFLUSH, &inittermios) < 0) {
-	    if (! ok_error (errno))
-		warn("tcsetattr: %m");
-	}
-    }
-}
-
-/********************************************************************
- *
- * output - Output PPP packet.
- */
-
-void output (int unit, unsigned char *p, int len)
-{
-    int fd = ppp_fd;
-    int proto;
-
-    if (debug)
-	dbglog("sent %P", p, len);
-
-    if (len < PPP_HDRLEN)
-	return;
-    if (new_style_driver) {
-	p += 2;
-	len -= 2;
-	proto = (p[0] << 8) + p[1];
-	if (ifunit >= 0 && !(proto >= 0xc000 || proto == PPP_CCPFRAG))
-	    fd = ppp_dev_fd;
-    }
-    if (write(fd, p, len) < 0) {
-	if (errno == EWOULDBLOCK || errno == ENOBUFS
-	    || errno == ENXIO || errno == EIO || errno == EINTR)
-	    warn("write: warning: %m (%d)", errno);
-	else
-	    error("write: %m (%d)", errno);
-    }
-}
-
-/********************************************************************
- *
- * wait_input - wait until there is data available,
- * for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-
-void wait_input(struct timeval *timo)
-{
-    fd_set ready, exc;
-    int n;
-
-    ready = in_fds;
-    exc = in_fds;
-    n = select(max_in_fd + 1, &ready, NULL, &exc, timo);
-    if (n < 0 && errno != EINTR)
-	fatal("select: %m(%d)", errno);
-}
-
-/*
- * add_fd - add an fd to the set that wait_input waits for.
- */
-void add_fd(int fd)
-{
-    FD_SET(fd, &in_fds);
-    if (fd > max_in_fd)
-	max_in_fd = fd;
-}
-
-/*
- * remove_fd - remove an fd from the set that wait_input waits for.
- */
-void remove_fd(int fd)
-{
-    FD_CLR(fd, &in_fds);
-}
-
-
-/********************************************************************
- *
- * read_packet - get a PPP packet from the serial device.
- */
-
-int read_packet (unsigned char *buf)
-{
-    int len, nr;
-
-    len = PPP_MRU + PPP_HDRLEN;
-    if (new_style_driver) {
-	*buf++ = PPP_ALLSTATIONS;
-	*buf++ = PPP_UI;
-	len -= 2;
-    }
-    nr = -1;
-    if (ppp_fd >= 0) {
-	nr = read(ppp_fd, buf, len);
-	if (nr < 0 && errno != EWOULDBLOCK && errno != EIO && errno != EINTR)
-	    error("read: %m");
-	if (nr < 0 && errno == ENXIO)
-	    return 0;
-    }
-    if (nr < 0 && new_style_driver && ifunit >= 0) {
-	/* N.B. we read ppp_fd first since LCP packets come in there. */
-	nr = read(ppp_dev_fd, buf, len);
-	if (nr < 0 && errno != EWOULDBLOCK && errno != EIO && errno != EINTR)
-	    error("read /dev/ppp: %m");
-	if (nr < 0 && errno == ENXIO)
-	    return 0;
-    }
-    return (new_style_driver && nr > 0)? nr+2: nr;
-}
-
-/********************************************************************
- *
- * get_loop_output - get outgoing packets from the ppp device,
- * and detect when we want to bring the real link up.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- */
-int
-get_loop_output(void)
-{
-    int rv = 0;
-    int n;
-
-    if (new_style_driver) {
-	while ((n = read_packet(inpacket_buf)) > 0)
-	    if (loop_frame(inpacket_buf, n))
-		rv = 1;
-	return rv;
-    }
-
-    while ((n = read(master_fd, inbuf, sizeof(inbuf))) > 0)
-	if (loop_chars(inbuf, n))
-	    rv = 1;
-
-    if (n == 0)
-	fatal("eof on loopback");
-
-    if (errno != EWOULDBLOCK)
-	fatal("read from loopback: %m(%d)", errno);
-
-    return rv;
-}
-
-/*
- * netif_set_mtu - set the MTU on the PPP network interface.
- */
-void
-netif_set_mtu(int unit, int mtu)
-{
-    struct ifreq ifr;
-
-    SYSDEBUG ((LOG_DEBUG, "netif_set_mtu: mtu = %d\n", mtu));
-
-    memset (&ifr, '\0', sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-    ifr.ifr_mtu = mtu;
-	
-    if (ifunit >= 0 && ioctl(sock_fd, SIOCSIFMTU, (caddr_t) &ifr) < 0)
-	fatal("ioctl(SIOCSIFMTU): %m");
-}
-
-/********************************************************************
- *
- * tty_send_config - configure the transmit characteristics of
- * the ppp interface.
- */
-
-void tty_send_config (int mtu,u_int32_t asyncmap,int pcomp,int accomp)
-{
-    u_int x;
-
-/*
- * Set the asyncmap and other parameters for the ppp device
- */
-    if (!still_ppp())
-	return;
-    link_mtu = mtu;
-    SYSDEBUG ((LOG_DEBUG, "send_config: asyncmap = %lx\n", asyncmap));
-    if (ioctl(ppp_fd, PPPIOCSASYNCMAP, (caddr_t) &asyncmap) < 0) {
-	if (!ok_error(errno))
-	    fatal("ioctl(PPPIOCSASYNCMAP): %m(%d)", errno);
-	return;
-    }
-    
-    x = get_flags(ppp_fd);
-    x = pcomp  ? x | SC_COMP_PROT : x & ~SC_COMP_PROT;
-    x = accomp ? x | SC_COMP_AC   : x & ~SC_COMP_AC;
-    x = sync_serial ? x | SC_SYNC : x & ~SC_SYNC;
-    set_flags(ppp_fd, x);
-}
-
-/********************************************************************
- *
- * tty_set_xaccm - set the extended transmit ACCM for the interface.
- */
-
-void tty_set_xaccm (ext_accm accm)
-{
-    SYSDEBUG ((LOG_DEBUG, "set_xaccm: %08lx %08lx %08lx %08lx\n",
-		accm[0], accm[1], accm[2], accm[3]));
-
-    if (!still_ppp())
-	return;
-    if (ioctl(ppp_fd, PPPIOCSXASYNCMAP, accm) < 0 && errno != ENOTTY) {
-	if ( ! ok_error (errno))
-	    warn("ioctl(set extended ACCM): %m(%d)", errno);
-    }
-}
-
-/********************************************************************
- *
- * tty_recv_config - configure the receive-side characteristics of
- * the ppp interface.
- */
-
-void tty_recv_config (int mru,u_int32_t asyncmap,int pcomp,int accomp)
-{
-    SYSDEBUG ((LOG_DEBUG, "recv_config: mru = %d\n", mru));
-/*
- * If we were called because the link has gone down then there is nothing
- * which may be done. Just return without incident.
- */
-    if (!still_ppp())
-	return;
-/*
- * Set the receiver parameters
- */
-    if (ioctl(ppp_fd, PPPIOCSMRU, (caddr_t) &mru) < 0) {
-	if ( ! ok_error (errno))
-	    error("ioctl(PPPIOCSMRU): %m(%d)", errno);
-    }
-    if (new_style_driver && ifunit >= 0
-	&& ioctl(ppp_dev_fd, PPPIOCSMRU, (caddr_t) &mru) < 0)
-	error("Couldn't set MRU in generic PPP layer: %m");
-
-    SYSDEBUG ((LOG_DEBUG, "recv_config: asyncmap = %lx\n", asyncmap));
-    if (ioctl(ppp_fd, PPPIOCSRASYNCMAP, (caddr_t) &asyncmap) < 0) {
-	if (!ok_error(errno))
-	    error("ioctl(PPPIOCSRASYNCMAP): %m(%d)", errno);
-    }
-}
-
-/********************************************************************
- *
- * ccp_test - ask kernel whether a given compression method
- * is acceptable for use.
- */
-
-int ccp_test (int unit, u_char *opt_ptr, int opt_len, int for_transmit)
-{
-    struct ppp_option_data data;
-
-    memset (&data, '\0', sizeof (data));
-    data.ptr      = opt_ptr;
-    data.length   = opt_len;
-    data.transmit = for_transmit;
-
-    if (ioctl(ppp_dev_fd, PPPIOCSCOMPRESS, (caddr_t) &data) >= 0)
-	return 1;
-
-    return (errno == ENOBUFS)? 0: -1;
-}
-
-/********************************************************************
- *
- * ccp_flags_set - inform kernel about the current state of CCP.
- */
-
-void ccp_flags_set (int unit, int isopen, int isup)
-{
-    if (still_ppp()) {
-	int x = get_flags(ppp_dev_fd);
-	x = isopen? x | SC_CCP_OPEN : x &~ SC_CCP_OPEN;
-	x = isup?   x | SC_CCP_UP   : x &~ SC_CCP_UP;
-	set_flags (ppp_dev_fd, x);
-    }
-}
-
-#ifdef PPP_FILTER
-/*
- * set_filters - set the active and pass filters in the kernel driver.
- */
-int set_filters(struct bpf_program *pass, struct bpf_program *active)
-{
-	struct sock_fprog fp;
-
-	fp.len = pass->bf_len;
-	fp.filter = (struct sock_filter *) pass->bf_insns;
-	if (ioctl(ppp_dev_fd, PPPIOCSPASS, &fp) < 0) {
-		if (errno == ENOTTY)
-			warn("kernel does not support PPP filtering");
-		else
-			error("Couldn't set pass-filter in kernel: %m");
-		return 0;
-	}
-	fp.len = active->bf_len;
-	fp.filter = (struct sock_filter *) active->bf_insns;
-	if (ioctl(ppp_dev_fd, PPPIOCSACTIVE, &fp) < 0) {
-		error("Couldn't set active-filter in kernel: %m");
-		return 0;
-	}
-	return 1;
-}
-#endif /* PPP_FILTER */
-
-/********************************************************************
- *
- * get_idle_time - return how long the link has been idle.
- */
-int
-get_idle_time(u, ip)
-    int u;
-    struct ppp_idle *ip;
-{
-    return ioctl(ppp_dev_fd, PPPIOCGIDLE, ip) >= 0;
-} 
-
-/********************************************************************
- *
- * get_ppp_stats - return statistics for the link.
- */
-int
-get_ppp_stats(u, stats)
-    int u;
-    struct pppd_stats *stats;
-{
-    struct ifpppstatsreq req;
-
-    memset (&req, 0, sizeof (req));
-
-    req.stats_ptr = (caddr_t) &req.stats;
-    strlcpy(req.ifr__name, ifname, sizeof(req.ifr__name));
-    if (ioctl(sock_fd, SIOCGPPPSTATS, &req) < 0) {
-	error("Couldn't get PPP statistics: %m");
-	return 0;
-    }
-    stats->bytes_in = req.stats.p.ppp_ibytes;
-    stats->bytes_out = req.stats.p.ppp_obytes;
-    return 1;
-}
-
-/********************************************************************
- *
- * ccp_fatal_error - returns 1 if decompression was disabled as a
- * result of an error detected after decompression of a packet,
- * 0 otherwise.  This is necessary because of patent nonsense.
- */
-
-int ccp_fatal_error (int unit)
-{
-    int x = get_flags(ppp_dev_fd);
-
-    return x & SC_DC_FERROR;
-}
-
-/********************************************************************
- *
- * path_to_procfs - find the path to the proc file system mount point
- */
-static char proc_path[MAXPATHLEN];
-static int proc_path_len;
-
-static char *path_to_procfs(const char *tail)
-{
-    struct mntent *mntent;
-    FILE *fp;
-
-    if (proc_path_len == 0) {
-	/* Default the mount location of /proc */
-	strlcpy (proc_path, "/proc", sizeof(proc_path));
-	proc_path_len = 5;
-	fp = fopen(MOUNTED, "r");
-	if (fp != NULL) {
-	    while ((mntent = getmntent(fp)) != NULL) {
-		if (strcmp(mntent->mnt_type, MNTTYPE_IGNORE) == 0)
-		    continue;
-		if (strcmp(mntent->mnt_type, "proc") == 0) {
-		    strlcpy(proc_path, mntent->mnt_dir, sizeof(proc_path));
-		    proc_path_len = strlen(proc_path);
-		    break;
-		}
-	    }
-	    fclose (fp);
-	}
-    }
-
-    strlcpy(proc_path + proc_path_len, tail,
-	    sizeof(proc_path) - proc_path_len);
-    return proc_path;
-}
-
-/*
- * /proc/net/route parsing stuff.
- */
-#define ROUTE_MAX_COLS	12
-FILE *route_fd = (FILE *) 0;
-static char route_buffer[512];
-static int route_dev_col, route_dest_col, route_gw_col;
-static int route_flags_col, route_mask_col;
-static int route_num_cols;
-
-static int open_route_table (void);
-static void close_route_table (void);
-static int read_route_table (struct rtentry *rt);
-
-/********************************************************************
- *
- * close_route_table - close the interface to the route table
- */
-
-static void close_route_table (void)
-{
-    if (route_fd != (FILE *) 0) {
-        fclose (route_fd);
-        route_fd = (FILE *) 0;
-    }
-}
-
-/********************************************************************
- *
- * open_route_table - open the interface to the route table
- */
-static char route_delims[] = " \t\n";
-
-static int open_route_table (void)
-{
-    char *path;
-
-    close_route_table();
-
-    path = path_to_procfs("/net/route");
-    route_fd = fopen (path, "r");
-    if (route_fd == NULL) {
-        error("can't open routing table %s: %m", path);
-        return 0;
-    }
-
-    route_dev_col = 0;		/* default to usual columns */
-    route_dest_col = 1;
-    route_gw_col = 2;
-    route_flags_col = 3;
-    route_mask_col = 7;
-    route_num_cols = 8;
-
-    /* parse header line */
-    if (fgets(route_buffer, sizeof(route_buffer), route_fd) != 0) {
-	char *p = route_buffer, *q;
-	int col;
-	for (col = 0; col < ROUTE_MAX_COLS; ++col) {
-	    int used = 1;
-	    if ((q = strtok(p, route_delims)) == 0)
-		break;
-	    if (strcasecmp(q, "iface") == 0)
-		route_dev_col = col;
-	    else if (strcasecmp(q, "destination") == 0)
-		route_dest_col = col;
-	    else if (strcasecmp(q, "gateway") == 0)
-		route_gw_col = col;
-	    else if (strcasecmp(q, "flags") == 0)
-		route_flags_col = col;
-	    else if (strcasecmp(q, "mask") == 0)
-		route_mask_col = col;
-	    else
-		used = 0;
-	    if (used && col >= route_num_cols)
-		route_num_cols = col + 1;
-	    p = NULL;
-	}
-    }
-
-    return 1;
-}
-
-/********************************************************************
- *
- * read_route_table - read the next entry from the route table
- */
-
-static int read_route_table(struct rtentry *rt)
-{
-    char *cols[ROUTE_MAX_COLS], *p;
-    int col;
-	
-    memset (rt, '\0', sizeof (struct rtentry));
-
-    if (fgets (route_buffer, sizeof (route_buffer), route_fd) == (char *) 0)
-	return 0;
-
-    p = route_buffer;
-    for (col = 0; col < route_num_cols; ++col) {
-	cols[col] = strtok(p, route_delims);
-	if (cols[col] == NULL)
-	    return 0;		/* didn't get enough columns */
-	p = NULL;
-    }
-
-    SIN_ADDR(rt->rt_dst) = strtoul(cols[route_dest_col], NULL, 16);
-    SIN_ADDR(rt->rt_gateway) = strtoul(cols[route_gw_col], NULL, 16);
-    SIN_ADDR(rt->rt_genmask) = strtoul(cols[route_mask_col], NULL, 16);
-
-    rt->rt_flags = (short) strtoul(cols[route_flags_col], NULL, 16);
-    rt->rt_dev   = cols[route_dev_col];
-
-    return 1;
-}
-
-/********************************************************************
- *
- * defaultroute_exists - determine if there is a default route
- */
-
-static int defaultroute_exists (struct rtentry *rt)
-{
-    int result = 0;
-
-    if (!open_route_table())
-        return 0;
-
-    while (read_route_table(rt) != 0) {
-        if ((rt->rt_flags & RTF_UP) == 0)
-	    continue;
-
-	if (kernel_version > KVERSION(2,1,0) && SIN_ADDR(rt->rt_genmask) != 0)
-	    continue;
-        if (SIN_ADDR(rt->rt_dst) == 0L) {
-	    result = 1;
-	    break;
-	}
-    }
-
-    close_route_table();
-    return result;
-}
-
-/*
- * have_route_to - determine if the system has any route to
- * a given IP address.  `addr' is in network byte order.
- * Return value is 1 if yes, 0 if no, -1 if don't know.
- * For demand mode to work properly, we have to ignore routes
- * through our own interface.
- */
-int have_route_to(u_int32_t addr)
-{
-    struct rtentry rt;
-    int result = 0;
-
-    if (!open_route_table())
-	return -1;		/* don't know */
-
-    while (read_route_table(&rt)) {
-	if ((rt.rt_flags & RTF_UP) == 0 || strcmp(rt.rt_dev, ifname) == 0)
-	    continue;
-	if ((addr & SIN_ADDR(rt.rt_genmask)) == SIN_ADDR(rt.rt_dst)) {
-	    result = 1;
-	    break;
-	}
-    }
-
-    close_route_table();
-    return result;
-}
-
-/********************************************************************
- *
- * sifdefaultroute - assign a default route through the address given.
- */
-
-int sifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
-{
-    struct rtentry rt;
-
-    if (defaultroute_exists(&rt) && strcmp(rt.rt_dev, ifname) != 0) {
-	u_int32_t old_gateway = SIN_ADDR(rt.rt_gateway);
-
-	if (old_gateway != gateway)
-	    error("not replacing existing default route to %s [%I]",
-		  rt.rt_dev, old_gateway);
-	return 0;
-    }
-
-    memset (&rt, '\0', sizeof (rt));
-    SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-    SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-
-    if (kernel_version > KVERSION(2,1,0)) {
-	SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	SIN_ADDR(rt.rt_genmask) = 0L;
-    }
-
-    SIN_ADDR(rt.rt_gateway) = gateway;
-    
-    rt.rt_flags = RTF_UP | RTF_GATEWAY;
-    if (ioctl(sock_fd, SIOCADDRT, &rt) < 0) {
-	if ( ! ok_error ( errno ))
-	    error("default route ioctl(SIOCADDRT): %m(%d)", errno);
-	return 0;
-    }
-
-    default_route_gateway = gateway;
-    return 1;
-}
-
-/********************************************************************
- *
- * cifdefaultroute - delete a default route through the address given.
- */
-
-int cifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
-{
-    struct rtentry rt;
-
-    default_route_gateway = 0;
-
-    memset (&rt, '\0', sizeof (rt));
-    SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-    SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-
-    if (kernel_version > KVERSION(2,1,0)) {
-	SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	SIN_ADDR(rt.rt_genmask) = 0L;
-    }
-
-    SIN_ADDR(rt.rt_gateway) = gateway;
-    
-    rt.rt_flags = RTF_UP | RTF_GATEWAY;
-    if (ioctl(sock_fd, SIOCDELRT, &rt) < 0 && errno != ESRCH) {
-	if (still_ppp()) {
-	    if ( ! ok_error ( errno ))
-		error("default route ioctl(SIOCDELRT): %m (%d)", errno);
-	    return 0;
-	}
-    }
-
-    return 1;
-}
-
-/********************************************************************
- *
- * sifproxyarp - Make a proxy ARP entry for the peer.
- */
-
-int sifproxyarp (int unit, u_int32_t his_adr)
-{
-    struct arpreq arpreq;
-    char *forw_path;
-
-    if (has_proxy_arp == 0) {
-	memset (&arpreq, '\0', sizeof(arpreq));
-    
-	SET_SA_FAMILY(arpreq.arp_pa, AF_INET);
-	SIN_ADDR(arpreq.arp_pa) = his_adr;
-	arpreq.arp_flags = ATF_PERM | ATF_PUBL;
-/*
- * Get the hardware address of an interface on the same subnet
- * as our local address.
- */
-	if (!get_ether_addr(his_adr, &arpreq.arp_ha, proxy_arp_dev,
-			    sizeof(proxy_arp_dev))) {
-	    error("Cannot determine ethernet address for proxy ARP");
-	    return 0;
-	}
-	strlcpy(arpreq.arp_dev, proxy_arp_dev, sizeof(arpreq.arp_dev));
-
-	if (ioctl(sock_fd, SIOCSARP, (caddr_t)&arpreq) < 0) {
-	    if ( ! ok_error ( errno ))
-		error("ioctl(SIOCSARP): %m(%d)", errno);
-	    return 0;
-	}
-	proxy_arp_addr = his_adr;
-	has_proxy_arp = 1;
-
-	if (tune_kernel) {
-	    forw_path = path_to_procfs("/sys/net/ipv4/ip_forward");
-	    if (forw_path != 0) {
-		int fd = open(forw_path, O_WRONLY);
-		if (fd >= 0) {
-		    if (write(fd, "1", 1) != 1)
-			error("Couldn't enable IP forwarding: %m");
-		    close(fd);
-		}
-	    }
-	}
-    }
-
-    return 1;
-}
-
-/********************************************************************
- *
- * cifproxyarp - Delete the proxy ARP entry for the peer.
- */
-
-int cifproxyarp (int unit, u_int32_t his_adr)
-{
-    struct arpreq arpreq;
-
-    if (has_proxy_arp) {
-	has_proxy_arp = 0;
-	memset (&arpreq, '\0', sizeof(arpreq));
-	SET_SA_FAMILY(arpreq.arp_pa, AF_INET);
-	SIN_ADDR(arpreq.arp_pa) = his_adr;
-	arpreq.arp_flags = ATF_PERM | ATF_PUBL;
-	strlcpy(arpreq.arp_dev, proxy_arp_dev, sizeof(arpreq.arp_dev));
-
-	if (ioctl(sock_fd, SIOCDARP, (caddr_t)&arpreq) < 0) {
-	    if ( ! ok_error ( errno ))
-		warn("ioctl(SIOCDARP): %m(%d)", errno);
-	    return 0;
-	}
-    }
-    return 1;
-}
-     
-/********************************************************************
- *
- * get_ether_addr - get the hardware address of an interface on the
- * the same subnet as ipaddr.
- */
-
-static int get_ether_addr (u_int32_t ipaddr,
-			   struct sockaddr *hwaddr,
-			   char *name, int namelen)
-{
-    struct ifreq *ifr, *ifend;
-    u_int32_t ina, mask;
-    char *aliasp;
-    struct ifreq ifreq;
-    struct ifconf ifc;
-    struct ifreq ifs[MAX_IFS];
-    
-    ifc.ifc_len = sizeof(ifs);
-    ifc.ifc_req = ifs;
-    if (ioctl(sock_fd, SIOCGIFCONF, &ifc) < 0) {
-	if ( ! ok_error ( errno ))
-	    error("ioctl(SIOCGIFCONF): %m(%d)", errno);
-	return 0;
-    }
-
-    SYSDEBUG ((LOG_DEBUG, "proxy arp: scanning %d interfaces for IP %s",
-		ifc.ifc_len / sizeof(struct ifreq), ip_ntoa(ipaddr)));
-/*
- * Scan through looking for an interface with an Internet
- * address on the same subnet as `ipaddr'.
- */
-    ifend = ifs + (ifc.ifc_len / sizeof(struct ifreq));
-    for (ifr = ifc.ifc_req; ifr < ifend; ifr++) {
-	if (ifr->ifr_addr.sa_family == AF_INET) {
-	    ina = SIN_ADDR(ifr->ifr_addr);
-	    strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-            SYSDEBUG ((LOG_DEBUG, "proxy arp: examining interface %s",
-			ifreq.ifr_name));
-/*
- * Check that the interface is up, and not point-to-point
- * nor loopback.
- */
-	    if (ioctl(sock_fd, SIOCGIFFLAGS, &ifreq) < 0)
-		continue;
-
-	    if (((ifreq.ifr_flags ^ FLAGS_GOOD) & FLAGS_MASK) != 0)
-		continue;
-/*
- * Get its netmask and check that it's on the right subnet.
- */
-	    if (ioctl(sock_fd, SIOCGIFNETMASK, &ifreq) < 0)
-	        continue;
-
-	    mask = SIN_ADDR(ifreq.ifr_addr);
-	    SYSDEBUG ((LOG_DEBUG, "proxy arp: interface addr %s mask %lx",
-			ip_ntoa(ina), ntohl(mask)));
-
-	    if (((ipaddr ^ ina) & mask) != 0)
-	        continue;
-	    break;
-	}
-    }
-    
-    if (ifr >= ifend)
-        return 0;
-
-    strlcpy(name, ifreq.ifr_name, namelen);
-
-    /* trim off the :1 in eth0:1 */
-    aliasp = strchr(name, ':');
-    if (aliasp != 0)
-	*aliasp = 0;
-
-    info("found interface %s for proxy arp", name);
-/*
- * Now get the hardware address.
- */
-    memset (&ifreq.ifr_hwaddr, 0, sizeof (struct sockaddr));
-    if (ioctl (sock_fd, SIOCGIFHWADDR, &ifreq) < 0) {
-        error("SIOCGIFHWADDR(%s): %m(%d)", ifreq.ifr_name, errno);
-        return 0;
-    }
-
-    memcpy (hwaddr,
-	    &ifreq.ifr_hwaddr,
-	    sizeof (struct sockaddr));
-
-    SYSDEBUG ((LOG_DEBUG,
-	   "proxy arp: found hwaddr %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
-		(int) ((unsigned char *) &hwaddr->sa_data)[0],
-		(int) ((unsigned char *) &hwaddr->sa_data)[1],
-		(int) ((unsigned char *) &hwaddr->sa_data)[2],
-		(int) ((unsigned char *) &hwaddr->sa_data)[3],
-		(int) ((unsigned char *) &hwaddr->sa_data)[4],
-		(int) ((unsigned char *) &hwaddr->sa_data)[5],
-		(int) ((unsigned char *) &hwaddr->sa_data)[6],
-		(int) ((unsigned char *) &hwaddr->sa_data)[7]));
-    return 1;
-}
-
-/*
- * get_if_hwaddr - get the hardware address for the specified
- * network interface device.
- */
-int
-get_if_hwaddr(u_char *addr, char *name)
-{
-	struct ifreq ifreq;
-	int ret, sock_fd;
-
-	sock_fd = socket(AF_INET, SOCK_DGRAM, 0);
-	if (sock_fd < 0)
-		return 0;
-	memset(&ifreq.ifr_hwaddr, 0, sizeof(struct sockaddr));
-	strlcpy(ifreq.ifr_name, name, sizeof(ifreq.ifr_name));
-	ret = ioctl(sock_fd, SIOCGIFHWADDR, &ifreq);
-	close(sock_fd);
-	if (ret >= 0)
-		memcpy(addr, ifreq.ifr_hwaddr.sa_data, 6);
-	return ret;
-}
-
-/*
- * get_first_ethernet - return the name of the first ethernet-style
- * interface on this system.
- */
-char *
-get_first_ethernet()
-{
-	return "eth0";
-}
-
-/********************************************************************
- *
- * Return user specified netmask, modified by any mask we might determine
- * for address `addr' (in network byte order).
- * Here we scan through the system's list of interfaces, looking for
- * any non-point-to-point interfaces which might appear to be on the same
- * network as `addr'.  If we find any, we OR in their netmask to the
- * user-specified netmask.
- */
-
-u_int32_t GetMask (u_int32_t addr)
-{
-    u_int32_t mask, nmask, ina;
-    struct ifreq *ifr, *ifend, ifreq;
-    struct ifconf ifc;
-    struct ifreq ifs[MAX_IFS];
-
-    addr = ntohl(addr);
-    
-    if (IN_CLASSA(addr))	/* determine network mask for address class */
-	nmask = IN_CLASSA_NET;
-    else if (IN_CLASSB(addr))
-	    nmask = IN_CLASSB_NET;
-    else
-	    nmask = IN_CLASSC_NET;
-    
-    /* class D nets are disallowed by bad_ip_adrs */
-    mask = netmask | htonl(nmask);
-/*
- * Scan through the system's network interfaces.
- */
-    ifc.ifc_len = sizeof(ifs);
-    ifc.ifc_req = ifs;
-    if (ioctl(sock_fd, SIOCGIFCONF, &ifc) < 0) {
-	if ( ! ok_error ( errno ))
-	    warn("ioctl(SIOCGIFCONF): %m(%d)", errno);
-	return mask;
-    }
-    
-    ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
-    for (ifr = ifc.ifc_req; ifr < ifend; ifr++) {
-/*
- * Check the interface's internet address.
- */
-	if (ifr->ifr_addr.sa_family != AF_INET)
-	    continue;
-	ina = SIN_ADDR(ifr->ifr_addr);
-	if (((ntohl(ina) ^ addr) & nmask) != 0)
-	    continue;
-/*
- * Check that the interface is up, and not point-to-point nor loopback.
- */
-	strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-	if (ioctl(sock_fd, SIOCGIFFLAGS, &ifreq) < 0)
-	    continue;
-	
-	if (((ifreq.ifr_flags ^ FLAGS_GOOD) & FLAGS_MASK) != 0)
-	    continue;
-/*
- * Get its netmask and OR it into our mask.
- */
-	if (ioctl(sock_fd, SIOCGIFNETMASK, &ifreq) < 0)
-	    continue;
-	mask |= SIN_ADDR(ifreq.ifr_addr);
-	break;
-    }
-    return mask;
-}
-
-/********************************************************************
- *
- * Internal routine to decode the version.modification.patch level
- */
-
-static void decode_version (char *buf, int *version,
-			    int *modification, int *patch)
-{
-    char *endp;
-
-    *version      = (int) strtoul (buf, &endp, 10);
-    *modification = 0;
-    *patch        = 0;
-    
-    if (endp != buf && *endp == '.') {
-	buf = endp + 1;
-	*modification = (int) strtoul (buf, &endp, 10);
-	if (endp != buf && *endp == '.') {
-	    buf = endp + 1;
-	    *patch = (int) strtoul (buf, &buf, 10);
-	}
-    }
-}
-
-/********************************************************************
- *
- * Procedure to determine if the PPP line discipline is registered.
- */
-
-static int
-ppp_registered(void)
-{
-    int local_fd;
-    int mfd = -1;
-    int ret = 0;
-    char slave[16];
-
-    /*
-     * We used to open the serial device and set it to the ppp line
-     * discipline here, in order to create a ppp unit.  But that is
-     * not a good idea - the user might have specified a device that
-     * they can't open (permission, or maybe it doesn't really exist).
-     * So we grab a pty master/slave pair and use that.
-     */
-    if (!get_pty(&mfd, &local_fd, slave, 0)) {
-	no_ppp_msg = "Couldn't determine if PPP is supported (no free ptys)";
-	return 0;
-    }
-
-    /*
-     * Try to put the device into the PPP discipline.
-     */
-    if (ioctl(local_fd, TIOCSETD, &ppp_disc) < 0) {
-	error("ioctl(TIOCSETD(PPP)): %m(%d)", errno);
-    } else
-	ret = 1;
-    
-    close(local_fd);
-    close(mfd);
-    return ret;
-}
-
-/********************************************************************
- *
- * ppp_available - check whether the system has any ppp interfaces
- * (in fact we check whether we can do an ioctl on ppp0).
- */
-
-int ppp_available(void)
-{
-    int s, ok, fd;
-    struct ifreq ifr;
-    int    size;
-    int    my_version, my_modification, my_patch;
-    int osmaj, osmin, ospatch;
-
-    no_ppp_msg = 
-	"This system lacks kernel support for PPP.  This could be because\n"
-	"the PPP kernel module could not be loaded, or because PPP was not\n"
-	"included in the kernel configuration.  If PPP was included as a\n"
-	"module, try `/sbin/modprobe -v ppp'.  If that fails, check that\n"
-	"ppp.o exists in /lib/modules/`uname -r`/net.\n"
-	"See README.linux file in the ppp distribution for more details.\n";
-
-    /* get the kernel version now, since we are called before sys_init */
-    uname(&utsname);
-    osmaj = osmin = ospatch = 0;
-    sscanf(utsname.release, "%d.%d.%d", &osmaj, &osmin, &ospatch);
-    kernel_version = KVERSION(osmaj, osmin, ospatch);
-
-    fd = open("/dev/ppp", O_RDWR);
-#if 0
-    if (fd < 0 && errno == ENOENT) {
-	/* try making it and see if that helps. */
-	if (mknod("/dev/ppp", S_IFCHR | S_IRUSR | S_IWUSR,
-		  makedev(108, 0)) >= 0) {
-	    fd = open("/dev/ppp", O_RDWR);
-	    if (fd >= 0)
-		info("Created /dev/ppp device node");
-	    else
-		unlink("/dev/ppp");	/* didn't work, undo the mknod */
-	} else if (errno == EEXIST) {
-	    fd = open("/dev/ppp", O_RDWR);
-	}
-    }
-#endif /* 0 */
-    if (fd >= 0) {
-	new_style_driver = 1;
-
-	/* XXX should get from driver */
-	driver_version = 2;
-	driver_modification = 4;
-	driver_patch = 0;
-	close(fd);
-	return 1;
-    }
-    if (kernel_version >= KVERSION(2,3,13)) {
-	if (errno == ENOENT)
-	    no_ppp_msg =
-		"pppd is unable to open the /dev/ppp device.\n"
-		"You need to create the /dev/ppp device node by\n"
-		"executing the following command as root:\n"
-		"	mknod /dev/ppp c 108 0\n";
-	return 0;
-    }
-
-/*
- * Open a socket for doing the ioctl operations.
- */    
-    s = socket(AF_INET, SOCK_DGRAM, 0);
-    if (s < 0)
-	return 0;
-    
-    strlcpy (ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name));
-    ok = ioctl(s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0;
-/*
- * If the device did not exist then attempt to create one by putting the
- * current tty into the PPP discipline. If this works then obtain the
- * flags for the device again.
- */
-    if (!ok) {
-	if (ppp_registered()) {
-	    strlcpy (ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name));
-	    ok = ioctl(s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0;
-	}
-    }
-/*
- * Ensure that the hardware address is for PPP and not something else
- */
-    if (ok)
-        ok = ioctl (s, SIOCGIFHWADDR, (caddr_t) &ifr) >= 0;
-
-    if (ok && ((ifr.ifr_hwaddr.sa_family & ~0xFF) != ARPHRD_PPP))
-        ok = 0;
-
-/*
- *  This is the PPP device. Validate the version of the driver at this
- *  point to ensure that this program will work with the driver.
- */
-    if (ok) {
-	char   abBuffer [1024];
-
-	ifr.ifr_data = abBuffer;
-	size = ioctl (s, SIOCGPPPVER, (caddr_t) &ifr);
-	if (size < 0) {
-	    error("Couldn't read driver version: %m");
-	    ok = 0;
-	    no_ppp_msg = "Sorry, couldn't verify kernel driver version\n";
-
-	} else {
-	    decode_version(abBuffer,
-			   &driver_version,
-			   &driver_modification,
-			   &driver_patch);
-/*
- * Validate the version of the driver against the version that we used.
- */
-	    decode_version(VERSION,
-			   &my_version,
-			   &my_modification,
-			   &my_patch);
-
-	    /* The version numbers must match */
-	    if (driver_version != my_version)
-		ok = 0;
-      
-	    /* The modification levels must be legal */
-	    if (driver_modification < 3) {
-		if (driver_modification >= 2) {
-		    /* we can cope with 2.2.0 and above */
-		    driver_is_old = 1;
-		} else {
-		    ok = 0;
-		}
-	    }
-
-	    close (s);
-	    if (!ok) {
-		slprintf(route_buffer, sizeof(route_buffer),
-			 "Sorry - PPP driver version %d.%d.%d is out of date\n",
-			 driver_version, driver_modification, driver_patch);
-
-		no_ppp_msg = route_buffer;
-	    }
-	}
-    }
-    return ok;
-}
-
-/********************************************************************
- *
- * sifvjcomp - config tcp header compression
- */
-
-int sifvjcomp (int u, int vjcomp, int cidcomp, int maxcid)
-{
-    u_int x = get_flags(ppp_dev_fd);
-
-    if (vjcomp) {
-        if (ioctl (ppp_dev_fd, PPPIOCSMAXCID, (caddr_t) &maxcid) < 0) {
-	    if (! ok_error (errno))
-		error("ioctl(PPPIOCSMAXCID): %m(%d)", errno);
-	    vjcomp = 0;
-	}
-    }
-
-    x = vjcomp  ? x | SC_COMP_TCP     : x &~ SC_COMP_TCP;
-    x = cidcomp ? x & ~SC_NO_TCP_CCID : x | SC_NO_TCP_CCID;
-    set_flags (ppp_dev_fd, x);
-
-    return 1;
-}
-
-/********************************************************************
- *
- * sifup - Config the interface up and enable IP packets to pass.
- */
-
-int sifup(int u)
-{
-    struct ifreq ifr;
-
-    memset (&ifr, '\0', sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-    if (ioctl(sock_fd, SIOCGIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl (SIOCGIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-
-    ifr.ifr_flags |= (IFF_UP | IFF_POINTOPOINT);
-    if (ioctl(sock_fd, SIOCSIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(SIOCSIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-    if_is_up++;
-
-    return 1;
-}
-
-/********************************************************************
- *
- * sifdown - Disable the indicated protocol and config the interface
- *	     down if there are no remaining protocols.
- */
-
-int sifdown (int u)
-{
-    struct ifreq ifr;
-
-    if (if_is_up && --if_is_up > 0)
-	return 1;
-
-    memset (&ifr, '\0', sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-    if (ioctl(sock_fd, SIOCGIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl (SIOCGIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-
-    ifr.ifr_flags &= ~IFF_UP;
-    ifr.ifr_flags |= IFF_POINTOPOINT;
-    if (ioctl(sock_fd, SIOCSIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(SIOCSIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-    return 1;
-}
-
-/********************************************************************
- *
- * sifaddr - Config the interface IP addresses and netmask.
- */
-
-int sifaddr (int unit, u_int32_t our_adr, u_int32_t his_adr,
-	     u_int32_t net_mask)
-{
-    struct ifreq   ifr; 
-    struct rtentry rt;
-    
-    memset (&ifr, '\0', sizeof (ifr));
-    memset (&rt,  '\0', sizeof (rt));
-    
-    SET_SA_FAMILY (ifr.ifr_addr,    AF_INET); 
-    SET_SA_FAMILY (ifr.ifr_dstaddr, AF_INET); 
-    SET_SA_FAMILY (ifr.ifr_netmask, AF_INET); 
-
-    strlcpy (ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-/*
- *  Set our IP address
- */
-    SIN_ADDR(ifr.ifr_addr) = our_adr;
-    if (ioctl(sock_fd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	if (errno != EEXIST) {
-	    if (! ok_error (errno))
-		error("ioctl(SIOCSIFADDR): %m(%d)", errno);
-	}
-        else {
-	    warn("ioctl(SIOCSIFADDR): Address already exists");
-	}
-        return (0);
-    }
-/*
- *  Set the gateway address
- */
-    SIN_ADDR(ifr.ifr_dstaddr) = his_adr;
-    if (ioctl(sock_fd, SIOCSIFDSTADDR, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(SIOCSIFDSTADDR): %m(%d)", errno); 
-	return (0);
-    } 
-/*
- *  Set the netmask.
- *  For recent kernels, force the netmask to 255.255.255.255.
- */
-    if (kernel_version >= KVERSION(2,1,16))
-	net_mask = ~0L;
-    if (net_mask != 0) {
-	SIN_ADDR(ifr.ifr_netmask) = net_mask;
-	if (ioctl(sock_fd, SIOCSIFNETMASK, (caddr_t) &ifr) < 0) {
-	    if (! ok_error (errno))
-		error("ioctl(SIOCSIFNETMASK): %m(%d)", errno); 
-	    return (0);
-	} 
-    }
-/*
- *  Add the device route
- */
-    if (kernel_version < KVERSION(2,1,16)) {
-	SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-	SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-	rt.rt_dev = ifname;
-
-	SIN_ADDR(rt.rt_gateway) = 0L;
-	SIN_ADDR(rt.rt_dst)     = his_adr;
-	rt.rt_flags = RTF_UP | RTF_HOST;
-
-	if (kernel_version > KVERSION(2,1,0)) {
-	    SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	    SIN_ADDR(rt.rt_genmask) = -1L;
-	}
-
-	if (ioctl(sock_fd, SIOCADDRT, &rt) < 0) {
-	    if (! ok_error (errno))
-		error("ioctl(SIOCADDRT) device route: %m(%d)", errno);
-	    return (0);
-	}
-    }
-
-    /* set ip_dynaddr in demand mode if address changes */
-    if (demand && tune_kernel && !dynaddr_set
-	&& our_old_addr && our_old_addr != our_adr) {
-	/* set ip_dynaddr if possible */
-	char *path;
-	int fd;
-
-	path = path_to_procfs("/sys/net/ipv4/ip_dynaddr");
-	if (path != 0 && (fd = open(path, O_WRONLY)) >= 0) {
-	    if (write(fd, "1", 1) != 1)
-		error("Couldn't enable dynamic IP addressing: %m");
-	    close(fd);
-	}
-	dynaddr_set = 1;	/* only 1 attempt */
-    }
-    our_old_addr = 0;
-
-    return 1;
-}
-
-/********************************************************************
- *
- * cifaddr - Clear the interface IP addresses, and delete routes
- * through the interface if possible.
- */
-
-int cifaddr (int unit, u_int32_t our_adr, u_int32_t his_adr)
-{
-    struct ifreq ifr;
-
-    if (kernel_version < KVERSION(2,1,16)) {
-/*
- *  Delete the route through the device
- */
-	struct rtentry rt;
-	memset (&rt, '\0', sizeof (rt));
-
-	SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-	SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-	rt.rt_dev = ifname;
-
-	SIN_ADDR(rt.rt_gateway) = 0;
-	SIN_ADDR(rt.rt_dst)     = his_adr;
-	rt.rt_flags = RTF_UP | RTF_HOST;
-
-	if (kernel_version > KVERSION(2,1,0)) {
-	    SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	    SIN_ADDR(rt.rt_genmask) = -1L;
-	}
-
-	if (ioctl(sock_fd, SIOCDELRT, &rt) < 0 && errno != ESRCH) {
-	    if (still_ppp() && ! ok_error (errno))
-		error("ioctl(SIOCDELRT) device route: %m(%d)", errno);
-	    return (0);
-	}
-    }
-
-    /* This way it is possible to have an IPX-only or IPv6-only interface */
-    memset(&ifr, 0, sizeof(ifr));
-    SET_SA_FAMILY(ifr.ifr_addr, AF_INET);
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    
-    if (ioctl(sock_fd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno)) {
-	    error("ioctl(SIOCSIFADDR): %m(%d)", errno);
-	    return 0;
-	}
-    }
-
-    our_old_addr = our_adr;
-
-    return 1;
-}
-
-#ifdef INET6
-/********************************************************************
- * 
- * sif6addr - Config the interface with an IPv6 link-local address
- */
-int sif6addr (int unit, eui64_t our_eui64, eui64_t his_eui64)
-{
-    struct in6_ifreq ifr6;
-    struct ifreq ifr;
-    struct in6_rtmsg rt6;
-
-    if (sock6_fd < 0) {
-	errno = -sock6_fd;
-	error("IPv6 socket creation failed: %m");
-	return 0;
-    }
-    memset(&ifr, 0, sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sock6_fd, SIOCGIFINDEX, (caddr_t) &ifr) < 0) {
-	error("sif6addr: ioctl(SIOCGIFINDEX): %m (%d)", errno);
-	return 0;
-    }
-    
-    /* Local interface */
-    memset(&ifr6, 0, sizeof(ifr6));
-    IN6_LLADDR_FROM_EUI64(ifr6.ifr6_addr, our_eui64);
-    ifr6.ifr6_ifindex = ifr.ifr_ifindex;
-    ifr6.ifr6_prefixlen = 10;
-
-    if (ioctl(sock6_fd, SIOCSIFADDR, &ifr6) < 0) {
-	error("sif6addr: ioctl(SIOCSIFADDR): %m (%d)", errno);
-	return 0;
-    }
-    
-    /* Route to remote host */
-    memset(&rt6, 0, sizeof(rt6));
-    IN6_LLADDR_FROM_EUI64(rt6.rtmsg_dst, his_eui64);
-    rt6.rtmsg_flags = RTF_UP;
-    rt6.rtmsg_dst_len = 10;
-    rt6.rtmsg_ifindex = ifr.ifr_ifindex;
-    rt6.rtmsg_metric = 1;
-    
-    if (ioctl(sock6_fd, SIOCADDRT, &rt6) < 0) {
-	error("sif6addr: ioctl(SIOCADDRT): %m (%d)", errno);
-	return 0;
-    }
-
-    return 1;
-}
-
-
-/********************************************************************
- *
- * cif6addr - Remove IPv6 address from interface
- */
-int cif6addr (int unit, eui64_t our_eui64, eui64_t his_eui64)
-{
-    struct ifreq ifr;
-    struct in6_ifreq ifr6;
-
-    if (sock6_fd < 0) {
-	errno = -sock6_fd;
-	error("IPv6 socket creation failed: %m");
-	return 0;
-    }
-    memset(&ifr, 0, sizeof(ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sock6_fd, SIOCGIFINDEX, (caddr_t) &ifr) < 0) {
-	error("cif6addr: ioctl(SIOCGIFINDEX): %m (%d)", errno);
-	return 0;
-    }
-    
-    memset(&ifr6, 0, sizeof(ifr6));
-    IN6_LLADDR_FROM_EUI64(ifr6.ifr6_addr, our_eui64);
-    ifr6.ifr6_ifindex = ifr.ifr_ifindex;
-    ifr6.ifr6_prefixlen = 10;
-
-    if (ioctl(sock6_fd, SIOCDIFADDR, &ifr6) < 0) {
-	if (errno != EADDRNOTAVAIL) {
-	    if (! ok_error (errno))
-		error("cif6addr: ioctl(SIOCDIFADDR): %m (%d)", errno);
-	}
-        else {
-	    warn("cif6addr: ioctl(SIOCDIFADDR): No such address");
-	}
-        return (0);
-    }
-    return 1;
-}
-#endif /* INET6 */
-
-/*
- * get_pty - get a pty master/slave pair and chown the slave side
- * to the uid given.  Assumes slave_name points to >= 16 bytes of space.
- */
-int
-get_pty(master_fdp, slave_fdp, slave_name, uid)
-    int *master_fdp;
-    int *slave_fdp;
-    char *slave_name;
-    int uid;
-{
-    int i, mfd, sfd = -1;
-    char pty_name[16];
-    struct termios tios;
-
-#ifdef TIOCGPTN
-    /*
-     * Try the unix98 way first.
-     */
-    mfd = open("/dev/ptmx", O_RDWR);
-    if (mfd >= 0) {
-	int ptn;
-	if (ioctl(mfd, TIOCGPTN, &ptn) >= 0) {
-	    slprintf(pty_name, sizeof(pty_name), "/dev/pts/%d", ptn);
-	    chmod(pty_name, S_IRUSR | S_IWUSR);
-#ifdef TIOCSPTLCK
-	    ptn = 0;
-	    if (ioctl(mfd, TIOCSPTLCK, &ptn) < 0)
-		warn("Couldn't unlock pty slave %s: %m", pty_name);
-#endif
-	    if ((sfd = open(pty_name, O_RDWR | O_NOCTTY)) < 0)
-		warn("Couldn't open pty slave %s: %m", pty_name);
-	}
-    }
-#endif /* TIOCGPTN */
-
-    if (sfd < 0) {
-	/* the old way - scan through the pty name space */
-	for (i = 0; i < 64; ++i) {
-	    slprintf(pty_name, sizeof(pty_name), "/dev/pty%c%x",
-		     'p' + i / 16, i % 16);
-	    mfd = open(pty_name, O_RDWR, 0);
-	    if (mfd >= 0) {
-		pty_name[5] = 't';
-		sfd = open(pty_name, O_RDWR | O_NOCTTY, 0);
-		if (sfd >= 0) {
-		    fchown(sfd, uid, -1);
-		    fchmod(sfd, S_IRUSR | S_IWUSR);
-		    break;
-		}
-		close(mfd);
-	    }
-	}
-    }
-
-    if (sfd < 0)
-	return 0;
-
-    strlcpy(slave_name, pty_name, 16);
-    *master_fdp = mfd;
-    *slave_fdp = sfd;
-    if (tcgetattr(sfd, &tios) == 0) {
-	tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB);
-	tios.c_cflag |= CS8 | CREAD | CLOCAL;
-	tios.c_iflag  = IGNPAR;
-	tios.c_oflag  = 0;
-	tios.c_lflag  = 0;
-	if (tcsetattr(sfd, TCSAFLUSH, &tios) < 0)
-	    warn("couldn't set attributes on pty: %m");
-    } else
-	warn("couldn't get attributes on pty: %m");
-
-    return 1;
-}
-
-/********************************************************************
- *
- * open_loopback - open the device we use for getting packets
- * in demand mode.  Under Linux, we use a pty master/slave pair.
- */
-int
-open_ppp_loopback(void)
-{
-    int flags;
-
-    looped = 1;
-    if (new_style_driver) {
-	/* allocate ourselves a ppp unit */
-	if (make_ppp_unit() < 0)
-	    die(1);
-	set_flags(ppp_dev_fd, SC_LOOP_TRAFFIC);
-	set_kdebugflag(kdebugflag);
-	ppp_fd = -1;
-	return ppp_dev_fd;
-    }
-
-    if (!get_pty(&master_fd, &slave_fd, loop_name, 0))
-	fatal("No free pty for loopback");
-    SYSDEBUG(("using %s for loopback", loop_name));
-
-    set_ppp_fd(slave_fd);
-
-    flags = fcntl(master_fd, F_GETFL);
-    if (flags == -1 ||
-	fcntl(master_fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	warn("couldn't set master loopback to nonblock: %m(%d)", errno);
-
-    flags = fcntl(ppp_fd, F_GETFL);
-    if (flags == -1 ||
-	fcntl(ppp_fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	warn("couldn't set slave loopback to nonblock: %m(%d)", errno);
-
-    if (ioctl(ppp_fd, TIOCSETD, &ppp_disc) < 0)
-	fatal("ioctl(TIOCSETD): %m(%d)", errno);
-/*
- * Find out which interface we were given.
- */
-    if (ioctl(ppp_fd, PPPIOCGUNIT, &ifunit) < 0)
-	fatal("ioctl(PPPIOCGUNIT): %m(%d)", errno);
-/*
- * Enable debug in the driver if requested.
- */
-    set_kdebugflag (kdebugflag);
-
-    return master_fd;
-}
-
-/********************************************************************
- *
- * restore_loop - reattach the ppp unit to the loopback.
- *
- * The kernel ppp driver automatically reattaches the ppp unit to
- * the loopback if the serial port is set to a line discipline other
- * than ppp, or if it detects a modem hangup.  The former will happen
- * in disestablish_ppp if the latter hasn't already happened, so we
- * shouldn't need to do anything.
- *
- * Just to be sure, set the real serial port to the normal discipline.
- */
-
-static void
-restore_loop(void)
-{
-    looped = 1;
-    if (new_style_driver) {
-	set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) | SC_LOOP_TRAFFIC);
-	return;
-    }
-    if (ppp_fd != slave_fd) {
-	(void) ioctl(ppp_fd, TIOCSETD, &tty_disc);
-	set_ppp_fd(slave_fd);
-    }
-}
-
-/********************************************************************
- *
- * sifnpmode - Set the mode for handling packets for a given NP.
- */
-
-int
-sifnpmode(u, proto, mode)
-    int u;
-    int proto;
-    enum NPmode mode;
-{
-    struct npioctl npi;
-
-    npi.protocol = proto;
-    npi.mode     = mode;
-    if (ioctl(ppp_dev_fd, PPPIOCSNPMODE, (caddr_t) &npi) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(PPPIOCSNPMODE, %d, %d): %m (%d)",
-		   proto, mode, errno);
-	return 0;
-    }
-    return 1;
-}
-
-
-/********************************************************************
- *
- * sipxfaddr - Config the interface IPX networknumber
- */
-
-int sipxfaddr (int unit, unsigned long int network, unsigned char * node )
-{
-    int    result = 1;
-
-#ifdef IPX_CHANGE
-    int    skfd; 
-    struct ifreq         ifr;
-    struct sockaddr_ipx *sipx = (struct sockaddr_ipx *) &ifr.ifr_addr;
-
-    skfd = socket (AF_IPX, SOCK_DGRAM, 0);
-    if (skfd < 0) { 
-	if (! ok_error (errno))
-	    dbglog("socket(AF_IPX): %m (%d)", errno);
-	result = 0;
-    }
-    else {
-	memset (&ifr, '\0', sizeof (ifr));
-	strlcpy (ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-
-	memcpy (sipx->sipx_node, node, IPX_NODE_LEN);
-	sipx->sipx_family  = AF_IPX;
-	sipx->sipx_port    = 0;
-	sipx->sipx_network = htonl (network);
-	sipx->sipx_type    = IPX_FRAME_ETHERII;
-	sipx->sipx_action  = IPX_CRTITF;
-/*
- *  Set the IPX device
- */
-	if (ioctl(skfd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	    result = 0;
-	    if (errno != EEXIST) {
-		if (! ok_error (errno))
-		    dbglog("ioctl(SIOCSIFADDR, CRTITF): %m (%d)", errno);
-	    }
-	    else {
-		warn("ioctl(SIOCSIFADDR, CRTITF): Address already exists");
-	    }
-	}
-	close (skfd);
-    }
-#endif
-    return result;
-}
-
-/********************************************************************
- *
- * cipxfaddr - Clear the information for the IPX network. The IPX routes
- *	       are removed and the device is no longer able to pass IPX
- *	       frames.
- */
-
-int cipxfaddr (int unit)
-{
-    int    result = 1;
-
-#ifdef IPX_CHANGE
-    int    skfd; 
-    struct ifreq         ifr;
-    struct sockaddr_ipx *sipx = (struct sockaddr_ipx *) &ifr.ifr_addr;
-
-    skfd = socket (AF_IPX, SOCK_DGRAM, 0);
-    if (skfd < 0) { 
-	if (! ok_error (errno))
-	    dbglog("socket(AF_IPX): %m (%d)", errno);
-	result = 0;
-    }
-    else {
-	memset (&ifr, '\0', sizeof (ifr));
-	strlcpy (ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-
-	sipx->sipx_type    = IPX_FRAME_ETHERII;
-	sipx->sipx_action  = IPX_DLTITF;
-	sipx->sipx_family  = AF_IPX;
-/*
- *  Set the IPX device
- */
-	if (ioctl(skfd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	    if (! ok_error (errno))
-		info("ioctl(SIOCSIFADDR, IPX_DLTITF): %m (%d)", errno);
-	    result = 0;
-	}
-	close (skfd);
-    }
-#endif
-    return result;
-}
-
-/*
- * Use the hostname as part of the random number seed.
- */
-int
-get_host_seed()
-{
-    int h;
-    char *p = hostname;
-
-    h = 407;
-    for (p = hostname; *p != 0; ++p)
-	h = h * 37 + *p;
-    return h;
-}
-
-/********************************************************************
- *
- * sys_check_options - check the options that the user specified
- */
-
-int
-sys_check_options(void)
-{
-#ifdef IPX_CHANGE
-/*
- * Disable the IPX protocol if the support is not present in the kernel.
- */
-    char *path;
-
-    if (ipxcp_protent.enabled_flag) {
-	struct stat stat_buf;
-        if ((path = path_to_procfs("/net/ipx_interface")) == 0
-	    || lstat(path, &stat_buf) < 0) {
-	    error("IPX support is not present in the kernel\n");
-	    ipxcp_protent.enabled_flag = 0;
-	}
-    }
-#endif
-    if (demand && driver_is_old) {
-	option_error("demand dialling is not supported by kernel driver "
-		     "version %d.%d.%d", driver_version, driver_modification,
-		     driver_patch);
-	return 0;
-    }
-    if (multilink && !new_style_driver) {
-	warn("Warning: multilink is not supported by the kernel driver");
-	multilink = 0;
-    }
-    return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/sys-linux.c.wtmp b/mdk-stage1/ppp/pppd/sys-linux.c.wtmp
deleted file mode 100644
index f1b48423e..000000000
--- a/mdk-stage1/ppp/pppd/sys-linux.c.wtmp
+++ /dev/null
@@ -1,2750 +0,0 @@
-/*
- * sys-linux.c - System-dependent procedures for setting up
- * PPP interfaces on Linux systems
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <sys/errno.h>
-#include <sys/file.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-#include <sys/sysmacros.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <syslog.h>
-#include <string.h>
-#include <time.h>
-#include <memory.h>
-#include <utmp.h>
-#include <mntent.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <ctype.h>
-#include <termios.h>
-#include <unistd.h>
-
-/* This is in netdevice.h. However, this compile will fail miserably if
-   you attempt to include netdevice.h because it has so many references
-   to __memcpy functions which it should not attempt to do. So, since I
-   really don't use it, but it must be defined, define it now. */
-
-#ifndef MAX_ADDR_LEN
-#define MAX_ADDR_LEN 7
-#endif
-
-#if __GLIBC__ >= 2
-#include <asm/types.h>		/* glibc 2 conflicts with linux/types.h */
-#include <net/if.h>
-#include <net/if_arp.h>
-#include <net/route.h>
-#include <netinet/if_ether.h>
-#else
-#include <linux/types.h>
-#include <linux/if.h>
-#include <linux/if_arp.h>
-#include <linux/route.h>
-#include <linux/if_ether.h>
-#endif
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include <linux/ppp_defs.h>
-#include <linux/if_ppp.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipcp.h"
-
-#ifdef IPX_CHANGE
-#include "ipxcp.h"
-#if __GLIBC__ >= 2 && \
-    !(defined(__powerpc__) && __GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
-#include <netipx/ipx.h>
-#else
-#include <linux/ipx.h>
-#endif
-#endif /* IPX_CHANGE */
-
-#ifdef PPP_FILTER
-#include <net/bpf.h>
-#include <linux/filter.h>
-#endif /* PPP_FILTER */
-
-#ifdef LOCKLIB
-#include <sys/locks.h>
-#endif
-
-#ifdef INET6
-#ifndef _LINUX_IN6_H
-/*
- *    This is in linux/include/net/ipv6.h.
- */
-
-struct in6_ifreq {
-    struct in6_addr ifr6_addr;
-    __u32 ifr6_prefixlen;
-    unsigned int ifr6_ifindex;
-};
-#endif
-
-#define IN6_LLADDR_FROM_EUI64(sin6, eui64) do {			\
-	memset(&sin6.s6_addr, 0, sizeof(struct in6_addr));	\
-	sin6.s6_addr16[0] = htons(0xfe80); 			\
-	eui64_copy(eui64, sin6.s6_addr32[2]);			\
-	} while (0)
-
-#endif /* INET6 */
-
-/* We can get an EIO error on an ioctl if the modem has hung up */
-#define ok_error(num) ((num)==EIO)
-
-static int tty_disc = N_TTY;	/* The TTY discipline */
-static int ppp_disc = N_PPP;	/* The PPP discpline */
-static int initfdflags = -1;	/* Initial file descriptor flags for fd */
-static int ppp_fd = -1;		/* fd which is set to PPP discipline */
-static int sock_fd = -1;	/* socket for doing interface ioctls */
-static int slave_fd = -1;
-static int master_fd = -1;
-#ifdef INET6
-static int sock6_fd = -1;
-#endif /* INET6 */
-static int ppp_dev_fd = -1;	/* fd for /dev/ppp (new style driver) */
-static int chindex;		/* channel index (new style driver) */
-
-static fd_set in_fds;		/* set of fds that wait_input waits for */
-static int max_in_fd;		/* highest fd set in in_fds */
-
-static int has_proxy_arp       = 0;
-static int driver_version      = 0;
-static int driver_modification = 0;
-static int driver_patch        = 0;
-static int driver_is_old       = 0;
-static int restore_term        = 0;	/* 1 => we've munged the terminal */
-static struct termios inittermios;	/* Initial TTY termios */
-
-static int new_style_driver = 0;
-
-static char loop_name[20];
-static unsigned char inbuf[512]; /* buffer for chars read from loopback */
-
-static int	if_is_up;	/* Interface has been marked up */
-static u_int32_t default_route_gateway;	/* Gateway for default route added */
-static u_int32_t proxy_arp_addr;	/* Addr for proxy arp entry added */
-static char proxy_arp_dev[16];		/* Device for proxy arp entry */
-static u_int32_t our_old_addr;		/* for detecting address changes */
-static int	dynaddr_set;		/* 1 if ip_dynaddr set */
-static int	looped;			/* 1 if using loop */
-static int	link_mtu;		/* mtu for the link (not bundle) */
-
-static struct utsname utsname;	/* for the kernel version */
-static int kernel_version;
-#define KVERSION(j,n,p)	((j)*1000000 + (n)*1000 + (p))
-
-#define MAX_IFS		100
-
-#define FLAGS_GOOD (IFF_UP          | IFF_BROADCAST)
-#define FLAGS_MASK (IFF_UP          | IFF_BROADCAST | \
-		    IFF_POINTOPOINT | IFF_LOOPBACK  | IFF_NOARP)
-
-#define SIN_ADDR(x)	(((struct sockaddr_in *) (&(x)))->sin_addr.s_addr)
-
-/* Prototypes for procedures local to this file. */
-static int get_flags (int fd);
-static void set_flags (int fd, int flags);
-static int translate_speed (int bps);
-static int baud_rate_of (int speed);
-static void close_route_table (void);
-static int open_route_table (void);
-static int read_route_table (struct rtentry *rt);
-static int defaultroute_exists (struct rtentry *rt);
-static int get_ether_addr (u_int32_t ipaddr, struct sockaddr *hwaddr,
-			   char *name, int namelen);
-static void decode_version (char *buf, int *version, int *mod, int *patch);
-static int set_kdebugflag(int level);
-static int ppp_registered(void);
-static int make_ppp_unit(void);
-static void restore_loop(void);	/* Transfer ppp unit back to loopback */
-
-extern u_char	inpacket_buf[];	/* borrowed from main.c */
-
-/*
- * SET_SA_FAMILY - set the sa_family field of a struct sockaddr,
- * if it exists.
- */
-
-#define SET_SA_FAMILY(addr, family)			\
-    memset ((char *) &(addr), '\0', sizeof(addr));	\
-    addr.sa_family = (family);
-
-/*
- * Determine if the PPP connection should still be present.
- */
-
-extern int hungup;
-
-/* new_fd is the fd of a tty */
-static void set_ppp_fd (int new_fd)
-{
-	SYSDEBUG ((LOG_DEBUG, "setting ppp_fd to %d\n", new_fd));
-	ppp_fd = new_fd;
-	if (!new_style_driver)
-		ppp_dev_fd = new_fd;
-}
-
-static int still_ppp(void)
-{
-	if (new_style_driver)
-		return !hungup && ppp_fd >= 0;
-	if (!hungup || ppp_fd == slave_fd)
-		return 1;
-	if (slave_fd >= 0) {
-		set_ppp_fd(slave_fd);
-		return 1;
-	}
-	return 0;
-}
-
-/********************************************************************
- *
- * Functions to read and set the flags value in the device driver
- */
-
-static int get_flags (int fd)
-{    
-    int flags;
-
-    if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &flags) < 0) {
-	if ( ok_error (errno) )
-	    flags = 0;
-	else
-	    fatal("ioctl(PPPIOCGFLAGS): %m");
-    }
-
-    SYSDEBUG ((LOG_DEBUG, "get flags = %x\n", flags));
-    return flags;
-}
-
-/********************************************************************/
-
-static void set_flags (int fd, int flags)
-{    
-    SYSDEBUG ((LOG_DEBUG, "set flags = %x\n", flags));
-
-    if (ioctl(fd, PPPIOCSFLAGS, (caddr_t) &flags) < 0) {
-	if (! ok_error (errno) )
-	    fatal("ioctl(PPPIOCSFLAGS, %x): %m", flags, errno);
-    }
-}
-
-/********************************************************************
- *
- * sys_init - System-dependent initialization.
- */
-
-void sys_init(void)
-{
-    int flags;
-
-    if (new_style_driver) {
-	ppp_dev_fd = open("/dev/ppp", O_RDWR);
-	if (ppp_dev_fd < 0)
-	    fatal("Couldn't open /dev/ppp: %m");
-	flags = fcntl(ppp_dev_fd, F_GETFL);
-	if (flags == -1
-	    || fcntl(ppp_dev_fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	    warn("Couldn't set /dev/ppp to nonblock: %m");
-    }
-
-    /* Get an internet socket for doing socket ioctls. */
-    sock_fd = socket(AF_INET, SOCK_DGRAM, 0);
-    if (sock_fd < 0)
-	fatal("Couldn't create IP socket: %m(%d)", errno);
-
-#ifdef INET6
-    sock6_fd = socket(AF_INET6, SOCK_DGRAM, 0);
-    if (sock6_fd < 0)
-	sock6_fd = -errno;	/* save errno for later */
-#endif
-
-    FD_ZERO(&in_fds);
-    max_in_fd = 0;
-}
-
-/********************************************************************
- *
- * sys_cleanup - restore any system state we modified before exiting:
- * mark the interface down, delete default route and/or proxy arp entry.
- * This shouldn't call die() because it's called from die().
- */
-
-void sys_cleanup(void)
-{
-/*
- * Take down the device
- */
-    if (if_is_up) {
-	if_is_up = 0;
-	sifdown(0);
-    }
-/*
- * Delete any routes through the device.
- */
-    if (default_route_gateway != 0)
-	cifdefaultroute(0, 0, default_route_gateway);
-
-    if (has_proxy_arp)
-	cifproxyarp(0, proxy_arp_addr);
-}
-
-/********************************************************************
- *
- * sys_close - Clean up in a child process before execing.
- */
-void
-sys_close(void)
-{
-    if (new_style_driver)
-	close(ppp_dev_fd);
-    if (sock_fd >= 0)
-	close(sock_fd);
-    if (slave_fd >= 0)
-	close(slave_fd);
-    if (master_fd >= 0)
-	close(master_fd);
-    closelog();
-}
-
-/********************************************************************
- *
- * set_kdebugflag - Define the debugging level for the kernel
- */
-
-static int set_kdebugflag (int requested_level)
-{
-    if (new_style_driver && ifunit < 0)
-	return 1;
-    if (ioctl(ppp_dev_fd, PPPIOCSDEBUG, &requested_level) < 0) {
-	if ( ! ok_error (errno) )
-	    error("ioctl(PPPIOCSDEBUG): %m");
-	return (0);
-    }
-    SYSDEBUG ((LOG_INFO, "set kernel debugging level to %d",
-		requested_level));
-    return (1);
-}
-
-/********************************************************************
- *
- * tty_establish_ppp - Turn the serial port into a ppp interface.
- */
-
-int tty_establish_ppp (int tty_fd)
-{
-    int x;
-    int fd = -1;
-
-/*
- * Ensure that the tty device is in exclusive mode.
- */
-    if (ioctl(tty_fd, TIOCEXCL, 0) < 0) {
-	if ( ! ok_error ( errno ))
-	    warn("Couldn't make tty exclusive: %m");
-    }
-/*
- * Demand mode - prime the old ppp device to relinquish the unit.
- */
-    if (!new_style_driver && looped
-	&& ioctl(slave_fd, PPPIOCXFERUNIT, 0) < 0) {
-	error("ioctl(transfer ppp unit): %m");
-	return -1;
-    }
-/*
- * Set the current tty to the PPP discpline
- */
-
-#ifndef N_SYNC_PPP
-#define N_SYNC_PPP 14
-#endif
-    ppp_disc = (new_style_driver && sync_serial)? N_SYNC_PPP: N_PPP;
-    if (ioctl(tty_fd, TIOCSETD, &ppp_disc) < 0) {
-	if ( ! ok_error (errno) ) {
-	    error("Couldn't set tty to PPP discipline: %m");
-	    return -1;
-	}
-    }
-
-    if (new_style_driver) {
-	/* Open another instance of /dev/ppp and connect the channel to it */
-	int flags;
-
-	if (ioctl(tty_fd, PPPIOCGCHAN, &chindex) == -1) {
-	    error("Couldn't get channel number: %m");
-	    goto err;
-	}
-	dbglog("using channel %d", chindex);
-	fd = open("/dev/ppp", O_RDWR);
-	if (fd < 0) {
-	    error("Couldn't reopen /dev/ppp: %m");
-	    goto err;
-	}
-	if (ioctl(fd, PPPIOCATTCHAN, &chindex) < 0) {
-	    error("Couldn't attach to channel %d: %m", chindex);
-	    goto err_close;
-	}
-	flags = fcntl(fd, F_GETFL);
-	if (flags == -1 || fcntl(fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	    warn("Couldn't set /dev/ppp (channel) to nonblock: %m");
-	set_ppp_fd(fd);
-
-	if (!looped)
-	    ifunit = -1;
-	if (!looped && !multilink) {
-	    /*
-	     * Create a new PPP unit.
-	     */
-	    if (make_ppp_unit() < 0)
-		goto err_close;
-	}
-
-	if (looped)
-	    set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) & ~SC_LOOP_TRAFFIC);
-
-	if (!multilink) {
-	    add_fd(ppp_dev_fd);
-	    if (ioctl(fd, PPPIOCCONNECT, &ifunit) < 0) {
-		error("Couldn't attach to PPP unit %d: %m", ifunit);
-		goto err_close;
-	    }
-	}
-
-    } else {
-	/*
-	 * Old-style driver: find out which interface we were given.
-	 */
-	set_ppp_fd (tty_fd);
-	if (ioctl(tty_fd, PPPIOCGUNIT, &x) < 0) {	
-	    if (ok_error (errno))
-		goto err;
-	    fatal("ioctl(PPPIOCGUNIT): %m(%d)", errno);
-	}
-	/* Check that we got the same unit again. */
-	if (looped && x != ifunit)
-	    fatal("transfer_ppp failed: wanted unit %d, got %d", ifunit, x);
-	ifunit = x;
-
-	/*
-	 * Fetch the initial file flags and reset blocking mode on the file.
-	 */
-	initfdflags = fcntl(tty_fd, F_GETFL);
-	if (initfdflags == -1 ||
-	    fcntl(tty_fd, F_SETFL, initfdflags | O_NONBLOCK) == -1) {
-	    if ( ! ok_error (errno))
-		warn("Couldn't set device to non-blocking mode: %m");
-	}
-    }
-
-    looped = 0;
-
-    /*
-     * Enable debug in the driver if requested.
-     */
-    if (!looped)
-	set_kdebugflag (kdebugflag);
-
-#define SC_RCVB	(SC_RCV_B7_0 | SC_RCV_B7_1 | SC_RCV_EVNP | SC_RCV_ODDP)
-#define SC_LOGB	(SC_DEBUG | SC_LOG_INPKT | SC_LOG_OUTPKT | SC_LOG_RAWIN \
-		 | SC_LOG_FLUSH)
-
-    set_flags(ppp_fd, ((get_flags(ppp_fd) & ~(SC_RCVB | SC_LOGB))
-		       | ((kdebugflag * SC_DEBUG) & SC_LOGB)));
-
-    SYSDEBUG ((LOG_NOTICE, "Using version %d.%d.%d of PPP driver",
-	    driver_version, driver_modification, driver_patch));
-
-    return ppp_fd;
-
- err_close:
-    close(fd);
- err:
-    if (ioctl(tty_fd, TIOCSETD, &tty_disc) < 0 && !ok_error(errno))
-	warn("Couldn't reset tty to normal line discipline: %m");
-    return -1;
-}
-
-/********************************************************************
- *
- * tty_disestablish_ppp - Restore the serial port to normal operation,
- * and reconnect the ppp unit to the loopback if in demand mode.
- * This shouldn't call die() because it's called from die().
- */
-
-void tty_disestablish_ppp(int tty_fd)
-{
-    if (demand)
-	restore_loop();
-    if (!hungup) {
-/*
- * Flush the tty output buffer so that the TIOCSETD doesn't hang.
- */
-	if (tcflush(tty_fd, TCIOFLUSH) < 0)
-	    warn("tcflush failed: %m");
-/*
- * Restore the previous line discipline
- */
-	if (ioctl(tty_fd, TIOCSETD, &tty_disc) < 0) {
-	    if ( ! ok_error (errno))
-		error("ioctl(TIOCSETD, N_TTY): %m");
-	}
-	
-	if (ioctl(tty_fd, TIOCNXCL, 0) < 0) {
-	    if ( ! ok_error (errno))
-		warn("ioctl(TIOCNXCL): %m(%d)", errno);
-	}
-
-	/* Reset non-blocking mode on fd. */
-	if (initfdflags != -1 && fcntl(tty_fd, F_SETFL, initfdflags) < 0) {
-	    if ( ! ok_error (errno))
-		warn("Couldn't restore device fd flags: %m");
-	}
-    }
-    initfdflags = -1;
-
-    if (new_style_driver) {
-	close(ppp_fd);
-	ppp_fd = -1;
-	if (!looped && ifunit >= 0 && ioctl(ppp_dev_fd, PPPIOCDETACH) < 0)
-	    error("Couldn't release PPP unit: %m");
-	if (!multilink)
-	    remove_fd(ppp_dev_fd);
-    }
-}
-
-/*
- * make_ppp_unit - make a new ppp unit for ppp_dev_fd.
- * Assumes new_style_driver.
- */
-static int make_ppp_unit()
-{
-	int x;
-
-	ifunit = req_unit;
-	x = ioctl(ppp_dev_fd, PPPIOCNEWUNIT, &ifunit);
-	if (x < 0 && req_unit >= 0 && errno == EEXIST) {
-		warn("Couldn't allocate PPP unit %d as it is already in use");
-		ifunit = -1;
-		x = ioctl(ppp_dev_fd, PPPIOCNEWUNIT, &ifunit);
-	}
-	if (x < 0)
-		error("Couldn't create new ppp unit: %m");
-	return x;
-}
-
-/*
- * cfg_bundle - configure the existing bundle.
- * Used in demand mode.
- */
-void cfg_bundle(int mrru, int mtru, int rssn, int tssn)
-{
-	int flags;
-
-	if (!new_style_driver)
-		return;
-
-	/* set the mrru, mtu and flags */
-	if (ioctl(ppp_dev_fd, PPPIOCSMRRU, &mrru) < 0)
-		error("Couldn't set MRRU: %m");
-	flags = get_flags(ppp_dev_fd);
-	flags &= ~(SC_MP_SHORTSEQ | SC_MP_XSHORTSEQ);
-	flags |= (rssn? SC_MP_SHORTSEQ: 0) | (tssn? SC_MP_XSHORTSEQ: 0)
-		| (mrru? SC_MULTILINK: 0);
-
-	set_flags(ppp_dev_fd, flags);
-
-	/* connect up the channel */
-	if (ioctl(ppp_fd, PPPIOCCONNECT, &ifunit) < 0)
-		fatal("Couldn't attach to PPP unit %d: %m", ifunit);
-	add_fd(ppp_dev_fd);
-}
-
-/*
- * make_new_bundle - create a new PPP unit (i.e. a bundle)
- * and connect our channel to it.  This should only get called
- * if `multilink' was set at the time establish_ppp was called.
- * In demand mode this uses our existing bundle instead of making
- * a new one.
- */
-void make_new_bundle(int mrru, int mtru, int rssn, int tssn)
-{
-	if (!new_style_driver)
-		return;
-
-	/* make us a ppp unit */
-	if (make_ppp_unit() < 0)
-		die(1);
-
-	/* set the mrru and flags */
-	cfg_bundle(mrru, mtru, rssn, tssn);
-}
-
-/*
- * bundle_attach - attach our link to a given PPP unit.
- * We assume the unit is controlled by another pppd.
- */
-int bundle_attach(int ifnum)
-{
-	if (!new_style_driver)
-		return -1;
-
-	if (ioctl(ppp_dev_fd, PPPIOCATTACH, &ifnum) < 0) {
-		if (errno == ENXIO)
-			return 0;	/* doesn't still exist */
-		fatal("Couldn't attach to interface unit %d: %m\n", ifnum);
-	}
-	if (ioctl(ppp_fd, PPPIOCCONNECT, &ifnum) < 0)
-		fatal("Couldn't connect to interface unit %d: %m", ifnum);
-	set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) | SC_MULTILINK);
-
-	ifunit = ifnum;
-	return 1;
-}
-
-/********************************************************************
- *
- * clean_check - Fetch the flags for the device and generate
- * appropriate error messages.
- */
-void clean_check(void)
-{
-    int x;
-    char *s;
-
-    if (still_ppp()) {
-	if (ioctl(ppp_fd, PPPIOCGFLAGS, (caddr_t) &x) == 0) {
-	    s = NULL;
-	    switch (~x & (SC_RCV_B7_0|SC_RCV_B7_1|SC_RCV_EVNP|SC_RCV_ODDP)) {
-	    case SC_RCV_B7_0:
-		s = "all had bit 7 set to 1";
-		break;
-		
-	    case SC_RCV_B7_1:
-		s = "all had bit 7 set to 0";
-		break;
-		
-	    case SC_RCV_EVNP:
-		s = "all had odd parity";
-		break;
-		
-	    case SC_RCV_ODDP:
-		s = "all had even parity";
-		break;
-	    }
-	    
-	    if (s != NULL) {
-		warn("Receive serial link is not 8-bit clean:");
-		warn("Problem: %s", s);
-	    }
-	}
-    }
-}
-	
-
-/*
- * List of valid speeds.
- */
-
-struct speed {
-    int speed_int, speed_val;
-} speeds[] = {
-#ifdef B50
-    { 50, B50 },
-#endif
-#ifdef B75
-    { 75, B75 },
-#endif
-#ifdef B110
-    { 110, B110 },
-#endif
-#ifdef B134
-    { 134, B134 },
-#endif
-#ifdef B150
-    { 150, B150 },
-#endif
-#ifdef B200
-    { 200, B200 },
-#endif
-#ifdef B300
-    { 300, B300 },
-#endif
-#ifdef B600
-    { 600, B600 },
-#endif
-#ifdef B1200
-    { 1200, B1200 },
-#endif
-#ifdef B1800
-    { 1800, B1800 },
-#endif
-#ifdef B2000
-    { 2000, B2000 },
-#endif
-#ifdef B2400
-    { 2400, B2400 },
-#endif
-#ifdef B3600
-    { 3600, B3600 },
-#endif
-#ifdef B4800
-    { 4800, B4800 },
-#endif
-#ifdef B7200
-    { 7200, B7200 },
-#endif
-#ifdef B9600
-    { 9600, B9600 },
-#endif
-#ifdef B19200
-    { 19200, B19200 },
-#endif
-#ifdef B38400
-    { 38400, B38400 },
-#endif
-#ifdef B57600
-    { 57600, B57600 },
-#endif
-#ifdef B76800
-    { 76800, B76800 },
-#endif
-#ifdef B115200
-    { 115200, B115200 },
-#endif
-#ifdef EXTA
-    { 19200, EXTA },
-#endif
-#ifdef EXTB
-    { 38400, EXTB },
-#endif
-#ifdef B230400
-    { 230400, B230400 },
-#endif
-#ifdef B460800
-    { 460800, B460800 },
-#endif
-#ifdef B921600
-    { 921600, B921600 },
-#endif
-    { 0, 0 }
-};
-
-/********************************************************************
- *
- * Translate from bits/second to a speed_t.
- */
-
-static int translate_speed (int bps)
-{
-    struct speed *speedp;
-
-    if (bps != 0) {
-	for (speedp = speeds; speedp->speed_int; speedp++) {
-	    if (bps == speedp->speed_int)
-		return speedp->speed_val;
-	}
-	warn("speed %d not supported", bps);
-    }
-    return 0;
-}
-
-/********************************************************************
- *
- * Translate from a speed_t to bits/second.
- */
-
-static int baud_rate_of (int speed)
-{
-    struct speed *speedp;
-    
-    if (speed != 0) {
-	for (speedp = speeds; speedp->speed_int; speedp++) {
-	    if (speed == speedp->speed_val)
-		return speedp->speed_int;
-	}
-    }
-    return 0;
-}
-
-/********************************************************************
- *
- * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
- * at the requested speed, etc.  If `local' is true, set CLOCAL
- * regardless of whether the modem option was specified.
- */
-
-void set_up_tty(int tty_fd, int local)
-{
-    int speed;
-    struct termios tios;
-
-    setdtr(tty_fd, 1);
-    if (tcgetattr(tty_fd, &tios) < 0) {
-	if (!ok_error(errno))
-	    fatal("tcgetattr: %m(%d)", errno);
-	return;
-    }
-    
-    if (!restore_term)
-	inittermios = tios;
-    
-    tios.c_cflag     &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
-    tios.c_cflag     |= CS8 | CREAD | HUPCL;
-
-    tios.c_iflag      = IGNBRK | IGNPAR;
-    tios.c_oflag      = 0;
-    tios.c_lflag      = 0;
-    tios.c_cc[VMIN]   = 1;
-    tios.c_cc[VTIME]  = 0;
-    
-    if (local || !modem)
-	tios.c_cflag ^= (CLOCAL | HUPCL);
-
-    switch (crtscts) {
-    case 1:
-	tios.c_cflag |= CRTSCTS;
-	break;
-
-    case -2:
-	tios.c_iflag     |= IXON | IXOFF;
-	tios.c_cc[VSTOP]  = 0x13;	/* DC3 = XOFF = ^S */
-	tios.c_cc[VSTART] = 0x11;	/* DC1 = XON  = ^Q */
-	break;
-
-    case -1:
-	tios.c_cflag &= ~CRTSCTS;
-	break;
-
-    default:
-	break;
-    }
-    
-    speed = translate_speed(inspeed);
-    if (speed) {
-	cfsetospeed (&tios, speed);
-	cfsetispeed (&tios, speed);
-    }
-/*
- * We can't proceed if the serial port speed is B0,
- * since that implies that the serial port is disabled.
- */
-    else {
-	speed = cfgetospeed(&tios);
-	if (speed == B0)
-	    fatal("Baud rate for %s is 0; need explicit baud rate", devnam);
-    }
-
-    if (tcsetattr(tty_fd, TCSAFLUSH, &tios) < 0)
-	if (!ok_error(errno))
-	    fatal("tcsetattr: %m");
-    
-    baud_rate    = baud_rate_of(speed);
-    restore_term = 1;
-}
-
-/********************************************************************
- *
- * setdtr - control the DTR line on the serial port.
- * This is called from die(), so it shouldn't call die().
- */
-
-void setdtr (int tty_fd, int on)
-{
-    int modembits = TIOCM_DTR;
-
-    ioctl(tty_fd, (on ? TIOCMBIS : TIOCMBIC), &modembits);
-}
-
-/********************************************************************
- *
- * restore_tty - restore the terminal to the saved settings.
- */
-
-void restore_tty (int tty_fd)
-{
-    if (restore_term) {
-	restore_term = 0;
-/*
- * Turn off echoing, because otherwise we can get into
- * a loop with the tty and the modem echoing to each other.
- * We presume we are the sole user of this tty device, so
- * when we close it, it will revert to its defaults anyway.
- */
-	if (!default_device)
-	    inittermios.c_lflag &= ~(ECHO | ECHONL);
-	
-	if (tcsetattr(tty_fd, TCSAFLUSH, &inittermios) < 0) {
-	    if (! ok_error (errno))
-		warn("tcsetattr: %m");
-	}
-    }
-}
-
-/********************************************************************
- *
- * output - Output PPP packet.
- */
-
-void output (int unit, unsigned char *p, int len)
-{
-    int fd = ppp_fd;
-    int proto;
-
-    if (debug)
-	dbglog("sent %P", p, len);
-
-    if (len < PPP_HDRLEN)
-	return;
-    if (new_style_driver) {
-	p += 2;
-	len -= 2;
-	proto = (p[0] << 8) + p[1];
-	if (ifunit >= 0 && !(proto >= 0xc000 || proto == PPP_CCPFRAG))
-	    fd = ppp_dev_fd;
-    }
-    if (write(fd, p, len) < 0) {
-	if (errno == EWOULDBLOCK || errno == ENOBUFS
-	    || errno == ENXIO || errno == EIO || errno == EINTR)
-	    warn("write: warning: %m (%d)", errno);
-	else
-	    error("write: %m (%d)", errno);
-    }
-}
-
-/********************************************************************
- *
- * wait_input - wait until there is data available,
- * for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-
-void wait_input(struct timeval *timo)
-{
-    fd_set ready, exc;
-    int n;
-
-    ready = in_fds;
-    exc = in_fds;
-    n = select(max_in_fd + 1, &ready, NULL, &exc, timo);
-    if (n < 0 && errno != EINTR)
-	fatal("select: %m(%d)", errno);
-}
-
-/*
- * add_fd - add an fd to the set that wait_input waits for.
- */
-void add_fd(int fd)
-{
-    FD_SET(fd, &in_fds);
-    if (fd > max_in_fd)
-	max_in_fd = fd;
-}
-
-/*
- * remove_fd - remove an fd from the set that wait_input waits for.
- */
-void remove_fd(int fd)
-{
-    FD_CLR(fd, &in_fds);
-}
-
-
-/********************************************************************
- *
- * read_packet - get a PPP packet from the serial device.
- */
-
-int read_packet (unsigned char *buf)
-{
-    int len, nr;
-
-    len = PPP_MRU + PPP_HDRLEN;
-    if (new_style_driver) {
-	*buf++ = PPP_ALLSTATIONS;
-	*buf++ = PPP_UI;
-	len -= 2;
-    }
-    nr = -1;
-    if (ppp_fd >= 0) {
-	nr = read(ppp_fd, buf, len);
-	if (nr < 0 && errno != EWOULDBLOCK && errno != EIO && errno != EINTR)
-	    error("read: %m");
-	if (nr < 0 && errno == ENXIO)
-	    return 0;
-    }
-    if (nr < 0 && new_style_driver && ifunit >= 0) {
-	/* N.B. we read ppp_fd first since LCP packets come in there. */
-	nr = read(ppp_dev_fd, buf, len);
-	if (nr < 0 && errno != EWOULDBLOCK && errno != EIO && errno != EINTR)
-	    error("read /dev/ppp: %m");
-	if (nr < 0 && errno == ENXIO)
-	    return 0;
-    }
-    return (new_style_driver && nr > 0)? nr+2: nr;
-}
-
-/********************************************************************
- *
- * get_loop_output - get outgoing packets from the ppp device,
- * and detect when we want to bring the real link up.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- */
-int
-get_loop_output(void)
-{
-    int rv = 0;
-    int n;
-
-    if (new_style_driver) {
-	while ((n = read_packet(inpacket_buf)) > 0)
-	    if (loop_frame(inpacket_buf, n))
-		rv = 1;
-	return rv;
-    }
-
-    while ((n = read(master_fd, inbuf, sizeof(inbuf))) > 0)
-	if (loop_chars(inbuf, n))
-	    rv = 1;
-
-    if (n == 0)
-	fatal("eof on loopback");
-
-    if (errno != EWOULDBLOCK)
-	fatal("read from loopback: %m(%d)", errno);
-
-    return rv;
-}
-
-/*
- * netif_set_mtu - set the MTU on the PPP network interface.
- */
-void
-netif_set_mtu(int unit, int mtu)
-{
-    struct ifreq ifr;
-
-    SYSDEBUG ((LOG_DEBUG, "netif_set_mtu: mtu = %d\n", mtu));
-
-    memset (&ifr, '\0', sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-    ifr.ifr_mtu = mtu;
-	
-    if (ifunit >= 0 && ioctl(sock_fd, SIOCSIFMTU, (caddr_t) &ifr) < 0)
-	fatal("ioctl(SIOCSIFMTU): %m");
-}
-
-/********************************************************************
- *
- * tty_send_config - configure the transmit characteristics of
- * the ppp interface.
- */
-
-void tty_send_config (int mtu,u_int32_t asyncmap,int pcomp,int accomp)
-{
-    u_int x;
-
-/*
- * Set the asyncmap and other parameters for the ppp device
- */
-    if (!still_ppp())
-	return;
-    link_mtu = mtu;
-    SYSDEBUG ((LOG_DEBUG, "send_config: asyncmap = %lx\n", asyncmap));
-    if (ioctl(ppp_fd, PPPIOCSASYNCMAP, (caddr_t) &asyncmap) < 0) {
-	if (!ok_error(errno))
-	    fatal("ioctl(PPPIOCSASYNCMAP): %m(%d)", errno);
-	return;
-    }
-    
-    x = get_flags(ppp_fd);
-    x = pcomp  ? x | SC_COMP_PROT : x & ~SC_COMP_PROT;
-    x = accomp ? x | SC_COMP_AC   : x & ~SC_COMP_AC;
-    x = sync_serial ? x | SC_SYNC : x & ~SC_SYNC;
-    set_flags(ppp_fd, x);
-}
-
-/********************************************************************
- *
- * tty_set_xaccm - set the extended transmit ACCM for the interface.
- */
-
-void tty_set_xaccm (ext_accm accm)
-{
-    SYSDEBUG ((LOG_DEBUG, "set_xaccm: %08lx %08lx %08lx %08lx\n",
-		accm[0], accm[1], accm[2], accm[3]));
-
-    if (!still_ppp())
-	return;
-    if (ioctl(ppp_fd, PPPIOCSXASYNCMAP, accm) < 0 && errno != ENOTTY) {
-	if ( ! ok_error (errno))
-	    warn("ioctl(set extended ACCM): %m(%d)", errno);
-    }
-}
-
-/********************************************************************
- *
- * tty_recv_config - configure the receive-side characteristics of
- * the ppp interface.
- */
-
-void tty_recv_config (int mru,u_int32_t asyncmap,int pcomp,int accomp)
-{
-    SYSDEBUG ((LOG_DEBUG, "recv_config: mru = %d\n", mru));
-/*
- * If we were called because the link has gone down then there is nothing
- * which may be done. Just return without incident.
- */
-    if (!still_ppp())
-	return;
-/*
- * Set the receiver parameters
- */
-    if (ioctl(ppp_fd, PPPIOCSMRU, (caddr_t) &mru) < 0) {
-	if ( ! ok_error (errno))
-	    error("ioctl(PPPIOCSMRU): %m(%d)", errno);
-    }
-    if (new_style_driver && ifunit >= 0
-	&& ioctl(ppp_dev_fd, PPPIOCSMRU, (caddr_t) &mru) < 0)
-	error("Couldn't set MRU in generic PPP layer: %m");
-
-    SYSDEBUG ((LOG_DEBUG, "recv_config: asyncmap = %lx\n", asyncmap));
-    if (ioctl(ppp_fd, PPPIOCSRASYNCMAP, (caddr_t) &asyncmap) < 0) {
-	if (!ok_error(errno))
-	    error("ioctl(PPPIOCSRASYNCMAP): %m(%d)", errno);
-    }
-}
-
-/********************************************************************
- *
- * ccp_test - ask kernel whether a given compression method
- * is acceptable for use.
- */
-
-int ccp_test (int unit, u_char *opt_ptr, int opt_len, int for_transmit)
-{
-    struct ppp_option_data data;
-
-    memset (&data, '\0', sizeof (data));
-    data.ptr      = opt_ptr;
-    data.length   = opt_len;
-    data.transmit = for_transmit;
-
-    if (ioctl(ppp_dev_fd, PPPIOCSCOMPRESS, (caddr_t) &data) >= 0)
-	return 1;
-
-    return (errno == ENOBUFS)? 0: -1;
-}
-
-/********************************************************************
- *
- * ccp_flags_set - inform kernel about the current state of CCP.
- */
-
-void ccp_flags_set (int unit, int isopen, int isup)
-{
-    if (still_ppp()) {
-	int x = get_flags(ppp_dev_fd);
-	x = isopen? x | SC_CCP_OPEN : x &~ SC_CCP_OPEN;
-	x = isup?   x | SC_CCP_UP   : x &~ SC_CCP_UP;
-	set_flags (ppp_dev_fd, x);
-    }
-}
-
-#ifdef PPP_FILTER
-/*
- * set_filters - set the active and pass filters in the kernel driver.
- */
-int set_filters(struct bpf_program *pass, struct bpf_program *active)
-{
-	struct sock_fprog fp;
-
-	fp.len = pass->bf_len;
-	fp.filter = (struct sock_filter *) pass->bf_insns;
-	if (ioctl(ppp_dev_fd, PPPIOCSPASS, &fp) < 0) {
-		if (errno == ENOTTY)
-			warn("kernel does not support PPP filtering");
-		else
-			error("Couldn't set pass-filter in kernel: %m");
-		return 0;
-	}
-	fp.len = active->bf_len;
-	fp.filter = (struct sock_filter *) active->bf_insns;
-	if (ioctl(ppp_dev_fd, PPPIOCSACTIVE, &fp) < 0) {
-		error("Couldn't set active-filter in kernel: %m");
-		return 0;
-	}
-	return 1;
-}
-#endif /* PPP_FILTER */
-
-/********************************************************************
- *
- * get_idle_time - return how long the link has been idle.
- */
-int
-get_idle_time(u, ip)
-    int u;
-    struct ppp_idle *ip;
-{
-    return ioctl(ppp_dev_fd, PPPIOCGIDLE, ip) >= 0;
-} 
-
-/********************************************************************
- *
- * get_ppp_stats - return statistics for the link.
- */
-int
-get_ppp_stats(u, stats)
-    int u;
-    struct pppd_stats *stats;
-{
-    struct ifpppstatsreq req;
-
-    memset (&req, 0, sizeof (req));
-
-    req.stats_ptr = (caddr_t) &req.stats;
-    strlcpy(req.ifr__name, ifname, sizeof(req.ifr__name));
-    if (ioctl(sock_fd, SIOCGPPPSTATS, &req) < 0) {
-	error("Couldn't get PPP statistics: %m");
-	return 0;
-    }
-    stats->bytes_in = req.stats.p.ppp_ibytes;
-    stats->bytes_out = req.stats.p.ppp_obytes;
-    return 1;
-}
-
-/********************************************************************
- *
- * ccp_fatal_error - returns 1 if decompression was disabled as a
- * result of an error detected after decompression of a packet,
- * 0 otherwise.  This is necessary because of patent nonsense.
- */
-
-int ccp_fatal_error (int unit)
-{
-    int x = get_flags(ppp_dev_fd);
-
-    return x & SC_DC_FERROR;
-}
-
-/********************************************************************
- *
- * path_to_procfs - find the path to the proc file system mount point
- */
-static char proc_path[MAXPATHLEN];
-static int proc_path_len;
-
-static char *path_to_procfs(const char *tail)
-{
-    struct mntent *mntent;
-    FILE *fp;
-
-    if (proc_path_len == 0) {
-	/* Default the mount location of /proc */
-	strlcpy (proc_path, "/proc", sizeof(proc_path));
-	proc_path_len = 5;
-	fp = fopen(MOUNTED, "r");
-	if (fp != NULL) {
-	    while ((mntent = getmntent(fp)) != NULL) {
-		if (strcmp(mntent->mnt_type, MNTTYPE_IGNORE) == 0)
-		    continue;
-		if (strcmp(mntent->mnt_type, "proc") == 0) {
-		    strlcpy(proc_path, mntent->mnt_dir, sizeof(proc_path));
-		    proc_path_len = strlen(proc_path);
-		    break;
-		}
-	    }
-	    fclose (fp);
-	}
-    }
-
-    strlcpy(proc_path + proc_path_len, tail,
-	    sizeof(proc_path) - proc_path_len);
-    return proc_path;
-}
-
-/*
- * /proc/net/route parsing stuff.
- */
-#define ROUTE_MAX_COLS	12
-FILE *route_fd = (FILE *) 0;
-static char route_buffer[512];
-static int route_dev_col, route_dest_col, route_gw_col;
-static int route_flags_col, route_mask_col;
-static int route_num_cols;
-
-static int open_route_table (void);
-static void close_route_table (void);
-static int read_route_table (struct rtentry *rt);
-
-/********************************************************************
- *
- * close_route_table - close the interface to the route table
- */
-
-static void close_route_table (void)
-{
-    if (route_fd != (FILE *) 0) {
-        fclose (route_fd);
-        route_fd = (FILE *) 0;
-    }
-}
-
-/********************************************************************
- *
- * open_route_table - open the interface to the route table
- */
-static char route_delims[] = " \t\n";
-
-static int open_route_table (void)
-{
-    char *path;
-
-    close_route_table();
-
-    path = path_to_procfs("/net/route");
-    route_fd = fopen (path, "r");
-    if (route_fd == NULL) {
-        error("can't open routing table %s: %m", path);
-        return 0;
-    }
-
-    route_dev_col = 0;		/* default to usual columns */
-    route_dest_col = 1;
-    route_gw_col = 2;
-    route_flags_col = 3;
-    route_mask_col = 7;
-    route_num_cols = 8;
-
-    /* parse header line */
-    if (fgets(route_buffer, sizeof(route_buffer), route_fd) != 0) {
-	char *p = route_buffer, *q;
-	int col;
-	for (col = 0; col < ROUTE_MAX_COLS; ++col) {
-	    int used = 1;
-	    if ((q = strtok(p, route_delims)) == 0)
-		break;
-	    if (strcasecmp(q, "iface") == 0)
-		route_dev_col = col;
-	    else if (strcasecmp(q, "destination") == 0)
-		route_dest_col = col;
-	    else if (strcasecmp(q, "gateway") == 0)
-		route_gw_col = col;
-	    else if (strcasecmp(q, "flags") == 0)
-		route_flags_col = col;
-	    else if (strcasecmp(q, "mask") == 0)
-		route_mask_col = col;
-	    else
-		used = 0;
-	    if (used && col >= route_num_cols)
-		route_num_cols = col + 1;
-	    p = NULL;
-	}
-    }
-
-    return 1;
-}
-
-/********************************************************************
- *
- * read_route_table - read the next entry from the route table
- */
-
-static int read_route_table(struct rtentry *rt)
-{
-    char *cols[ROUTE_MAX_COLS], *p;
-    int col;
-	
-    memset (rt, '\0', sizeof (struct rtentry));
-
-    if (fgets (route_buffer, sizeof (route_buffer), route_fd) == (char *) 0)
-	return 0;
-
-    p = route_buffer;
-    for (col = 0; col < route_num_cols; ++col) {
-	cols[col] = strtok(p, route_delims);
-	if (cols[col] == NULL)
-	    return 0;		/* didn't get enough columns */
-	p = NULL;
-    }
-
-    SIN_ADDR(rt->rt_dst) = strtoul(cols[route_dest_col], NULL, 16);
-    SIN_ADDR(rt->rt_gateway) = strtoul(cols[route_gw_col], NULL, 16);
-    SIN_ADDR(rt->rt_genmask) = strtoul(cols[route_mask_col], NULL, 16);
-
-    rt->rt_flags = (short) strtoul(cols[route_flags_col], NULL, 16);
-    rt->rt_dev   = cols[route_dev_col];
-
-    return 1;
-}
-
-/********************************************************************
- *
- * defaultroute_exists - determine if there is a default route
- */
-
-static int defaultroute_exists (struct rtentry *rt)
-{
-    int result = 0;
-
-    if (!open_route_table())
-        return 0;
-
-    while (read_route_table(rt) != 0) {
-        if ((rt->rt_flags & RTF_UP) == 0)
-	    continue;
-
-	if (kernel_version > KVERSION(2,1,0) && SIN_ADDR(rt->rt_genmask) != 0)
-	    continue;
-        if (SIN_ADDR(rt->rt_dst) == 0L) {
-	    result = 1;
-	    break;
-	}
-    }
-
-    close_route_table();
-    return result;
-}
-
-/*
- * have_route_to - determine if the system has any route to
- * a given IP address.  `addr' is in network byte order.
- * Return value is 1 if yes, 0 if no, -1 if don't know.
- * For demand mode to work properly, we have to ignore routes
- * through our own interface.
- */
-int have_route_to(u_int32_t addr)
-{
-    struct rtentry rt;
-    int result = 0;
-
-    if (!open_route_table())
-	return -1;		/* don't know */
-
-    while (read_route_table(&rt)) {
-	if ((rt.rt_flags & RTF_UP) == 0 || strcmp(rt.rt_dev, ifname) == 0)
-	    continue;
-	if ((addr & SIN_ADDR(rt.rt_genmask)) == SIN_ADDR(rt.rt_dst)) {
-	    result = 1;
-	    break;
-	}
-    }
-
-    close_route_table();
-    return result;
-}
-
-/********************************************************************
- *
- * sifdefaultroute - assign a default route through the address given.
- */
-
-int sifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
-{
-    struct rtentry rt;
-
-    if (defaultroute_exists(&rt) && strcmp(rt.rt_dev, ifname) != 0) {
-	u_int32_t old_gateway = SIN_ADDR(rt.rt_gateway);
-
-	if (old_gateway != gateway)
-	    error("not replacing existing default route to %s [%I]",
-		  rt.rt_dev, old_gateway);
-	return 0;
-    }
-
-    memset (&rt, '\0', sizeof (rt));
-    SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-    SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-
-    if (kernel_version > KVERSION(2,1,0)) {
-	SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	SIN_ADDR(rt.rt_genmask) = 0L;
-    }
-
-    SIN_ADDR(rt.rt_gateway) = gateway;
-    
-    rt.rt_flags = RTF_UP | RTF_GATEWAY;
-    if (ioctl(sock_fd, SIOCADDRT, &rt) < 0) {
-	if ( ! ok_error ( errno ))
-	    error("default route ioctl(SIOCADDRT): %m(%d)", errno);
-	return 0;
-    }
-
-    default_route_gateway = gateway;
-    return 1;
-}
-
-/********************************************************************
- *
- * cifdefaultroute - delete a default route through the address given.
- */
-
-int cifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
-{
-    struct rtentry rt;
-
-    default_route_gateway = 0;
-
-    memset (&rt, '\0', sizeof (rt));
-    SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-    SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-
-    if (kernel_version > KVERSION(2,1,0)) {
-	SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	SIN_ADDR(rt.rt_genmask) = 0L;
-    }
-
-    SIN_ADDR(rt.rt_gateway) = gateway;
-    
-    rt.rt_flags = RTF_UP | RTF_GATEWAY;
-    if (ioctl(sock_fd, SIOCDELRT, &rt) < 0 && errno != ESRCH) {
-	if (still_ppp()) {
-	    if ( ! ok_error ( errno ))
-		error("default route ioctl(SIOCDELRT): %m (%d)", errno);
-	    return 0;
-	}
-    }
-
-    return 1;
-}
-
-/********************************************************************
- *
- * sifproxyarp - Make a proxy ARP entry for the peer.
- */
-
-int sifproxyarp (int unit, u_int32_t his_adr)
-{
-    struct arpreq arpreq;
-    char *forw_path;
-
-    if (has_proxy_arp == 0) {
-	memset (&arpreq, '\0', sizeof(arpreq));
-    
-	SET_SA_FAMILY(arpreq.arp_pa, AF_INET);
-	SIN_ADDR(arpreq.arp_pa) = his_adr;
-	arpreq.arp_flags = ATF_PERM | ATF_PUBL;
-/*
- * Get the hardware address of an interface on the same subnet
- * as our local address.
- */
-	if (!get_ether_addr(his_adr, &arpreq.arp_ha, proxy_arp_dev,
-			    sizeof(proxy_arp_dev))) {
-	    error("Cannot determine ethernet address for proxy ARP");
-	    return 0;
-	}
-	strlcpy(arpreq.arp_dev, proxy_arp_dev, sizeof(arpreq.arp_dev));
-
-	if (ioctl(sock_fd, SIOCSARP, (caddr_t)&arpreq) < 0) {
-	    if ( ! ok_error ( errno ))
-		error("ioctl(SIOCSARP): %m(%d)", errno);
-	    return 0;
-	}
-	proxy_arp_addr = his_adr;
-	has_proxy_arp = 1;
-
-	if (tune_kernel) {
-	    forw_path = path_to_procfs("/sys/net/ipv4/ip_forward");
-	    if (forw_path != 0) {
-		int fd = open(forw_path, O_WRONLY);
-		if (fd >= 0) {
-		    if (write(fd, "1", 1) != 1)
-			error("Couldn't enable IP forwarding: %m");
-		    close(fd);
-		}
-	    }
-	}
-    }
-
-    return 1;
-}
-
-/********************************************************************
- *
- * cifproxyarp - Delete the proxy ARP entry for the peer.
- */
-
-int cifproxyarp (int unit, u_int32_t his_adr)
-{
-    struct arpreq arpreq;
-
-    if (has_proxy_arp) {
-	has_proxy_arp = 0;
-	memset (&arpreq, '\0', sizeof(arpreq));
-	SET_SA_FAMILY(arpreq.arp_pa, AF_INET);
-	SIN_ADDR(arpreq.arp_pa) = his_adr;
-	arpreq.arp_flags = ATF_PERM | ATF_PUBL;
-	strlcpy(arpreq.arp_dev, proxy_arp_dev, sizeof(arpreq.arp_dev));
-
-	if (ioctl(sock_fd, SIOCDARP, (caddr_t)&arpreq) < 0) {
-	    if ( ! ok_error ( errno ))
-		warn("ioctl(SIOCDARP): %m(%d)", errno);
-	    return 0;
-	}
-    }
-    return 1;
-}
-     
-/********************************************************************
- *
- * get_ether_addr - get the hardware address of an interface on the
- * the same subnet as ipaddr.
- */
-
-static int get_ether_addr (u_int32_t ipaddr,
-			   struct sockaddr *hwaddr,
-			   char *name, int namelen)
-{
-    struct ifreq *ifr, *ifend;
-    u_int32_t ina, mask;
-    char *aliasp;
-    struct ifreq ifreq;
-    struct ifconf ifc;
-    struct ifreq ifs[MAX_IFS];
-    
-    ifc.ifc_len = sizeof(ifs);
-    ifc.ifc_req = ifs;
-    if (ioctl(sock_fd, SIOCGIFCONF, &ifc) < 0) {
-	if ( ! ok_error ( errno ))
-	    error("ioctl(SIOCGIFCONF): %m(%d)", errno);
-	return 0;
-    }
-
-    SYSDEBUG ((LOG_DEBUG, "proxy arp: scanning %d interfaces for IP %s",
-		ifc.ifc_len / sizeof(struct ifreq), ip_ntoa(ipaddr)));
-/*
- * Scan through looking for an interface with an Internet
- * address on the same subnet as `ipaddr'.
- */
-    ifend = ifs + (ifc.ifc_len / sizeof(struct ifreq));
-    for (ifr = ifc.ifc_req; ifr < ifend; ifr++) {
-	if (ifr->ifr_addr.sa_family == AF_INET) {
-	    ina = SIN_ADDR(ifr->ifr_addr);
-	    strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-            SYSDEBUG ((LOG_DEBUG, "proxy arp: examining interface %s",
-			ifreq.ifr_name));
-/*
- * Check that the interface is up, and not point-to-point
- * nor loopback.
- */
-	    if (ioctl(sock_fd, SIOCGIFFLAGS, &ifreq) < 0)
-		continue;
-
-	    if (((ifreq.ifr_flags ^ FLAGS_GOOD) & FLAGS_MASK) != 0)
-		continue;
-/*
- * Get its netmask and check that it's on the right subnet.
- */
-	    if (ioctl(sock_fd, SIOCGIFNETMASK, &ifreq) < 0)
-	        continue;
-
-	    mask = SIN_ADDR(ifreq.ifr_addr);
-	    SYSDEBUG ((LOG_DEBUG, "proxy arp: interface addr %s mask %lx",
-			ip_ntoa(ina), ntohl(mask)));
-
-	    if (((ipaddr ^ ina) & mask) != 0)
-	        continue;
-	    break;
-	}
-    }
-    
-    if (ifr >= ifend)
-        return 0;
-
-    strlcpy(name, ifreq.ifr_name, namelen);
-
-    /* trim off the :1 in eth0:1 */
-    aliasp = strchr(name, ':');
-    if (aliasp != 0)
-	*aliasp = 0;
-
-    info("found interface %s for proxy arp", name);
-/*
- * Now get the hardware address.
- */
-    memset (&ifreq.ifr_hwaddr, 0, sizeof (struct sockaddr));
-    if (ioctl (sock_fd, SIOCGIFHWADDR, &ifreq) < 0) {
-        error("SIOCGIFHWADDR(%s): %m(%d)", ifreq.ifr_name, errno);
-        return 0;
-    }
-
-    memcpy (hwaddr,
-	    &ifreq.ifr_hwaddr,
-	    sizeof (struct sockaddr));
-
-    SYSDEBUG ((LOG_DEBUG,
-	   "proxy arp: found hwaddr %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
-		(int) ((unsigned char *) &hwaddr->sa_data)[0],
-		(int) ((unsigned char *) &hwaddr->sa_data)[1],
-		(int) ((unsigned char *) &hwaddr->sa_data)[2],
-		(int) ((unsigned char *) &hwaddr->sa_data)[3],
-		(int) ((unsigned char *) &hwaddr->sa_data)[4],
-		(int) ((unsigned char *) &hwaddr->sa_data)[5],
-		(int) ((unsigned char *) &hwaddr->sa_data)[6],
-		(int) ((unsigned char *) &hwaddr->sa_data)[7]));
-    return 1;
-}
-
-/*
- * get_if_hwaddr - get the hardware address for the specified
- * network interface device.
- */
-int
-get_if_hwaddr(u_char *addr, char *name)
-{
-	struct ifreq ifreq;
-	int ret, sock_fd;
-
-	sock_fd = socket(AF_INET, SOCK_DGRAM, 0);
-	if (sock_fd < 0)
-		return 0;
-	memset(&ifreq.ifr_hwaddr, 0, sizeof(struct sockaddr));
-	strlcpy(ifreq.ifr_name, name, sizeof(ifreq.ifr_name));
-	ret = ioctl(sock_fd, SIOCGIFHWADDR, &ifreq);
-	close(sock_fd);
-	if (ret >= 0)
-		memcpy(addr, ifreq.ifr_hwaddr.sa_data, 6);
-	return ret;
-}
-
-/*
- * get_first_ethernet - return the name of the first ethernet-style
- * interface on this system.
- */
-char *
-get_first_ethernet()
-{
-	return "eth0";
-}
-
-/********************************************************************
- *
- * Return user specified netmask, modified by any mask we might determine
- * for address `addr' (in network byte order).
- * Here we scan through the system's list of interfaces, looking for
- * any non-point-to-point interfaces which might appear to be on the same
- * network as `addr'.  If we find any, we OR in their netmask to the
- * user-specified netmask.
- */
-
-u_int32_t GetMask (u_int32_t addr)
-{
-    u_int32_t mask, nmask, ina;
-    struct ifreq *ifr, *ifend, ifreq;
-    struct ifconf ifc;
-    struct ifreq ifs[MAX_IFS];
-
-    addr = ntohl(addr);
-    
-    if (IN_CLASSA(addr))	/* determine network mask for address class */
-	nmask = IN_CLASSA_NET;
-    else if (IN_CLASSB(addr))
-	    nmask = IN_CLASSB_NET;
-    else
-	    nmask = IN_CLASSC_NET;
-    
-    /* class D nets are disallowed by bad_ip_adrs */
-    mask = netmask | htonl(nmask);
-/*
- * Scan through the system's network interfaces.
- */
-    ifc.ifc_len = sizeof(ifs);
-    ifc.ifc_req = ifs;
-    if (ioctl(sock_fd, SIOCGIFCONF, &ifc) < 0) {
-	if ( ! ok_error ( errno ))
-	    warn("ioctl(SIOCGIFCONF): %m(%d)", errno);
-	return mask;
-    }
-    
-    ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
-    for (ifr = ifc.ifc_req; ifr < ifend; ifr++) {
-/*
- * Check the interface's internet address.
- */
-	if (ifr->ifr_addr.sa_family != AF_INET)
-	    continue;
-	ina = SIN_ADDR(ifr->ifr_addr);
-	if (((ntohl(ina) ^ addr) & nmask) != 0)
-	    continue;
-/*
- * Check that the interface is up, and not point-to-point nor loopback.
- */
-	strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-	if (ioctl(sock_fd, SIOCGIFFLAGS, &ifreq) < 0)
-	    continue;
-	
-	if (((ifreq.ifr_flags ^ FLAGS_GOOD) & FLAGS_MASK) != 0)
-	    continue;
-/*
- * Get its netmask and OR it into our mask.
- */
-	if (ioctl(sock_fd, SIOCGIFNETMASK, &ifreq) < 0)
-	    continue;
-	mask |= SIN_ADDR(ifreq.ifr_addr);
-	break;
-    }
-    return mask;
-}
-
-/********************************************************************
- *
- * Internal routine to decode the version.modification.patch level
- */
-
-static void decode_version (char *buf, int *version,
-			    int *modification, int *patch)
-{
-    char *endp;
-
-    *version      = (int) strtoul (buf, &endp, 10);
-    *modification = 0;
-    *patch        = 0;
-    
-    if (endp != buf && *endp == '.') {
-	buf = endp + 1;
-	*modification = (int) strtoul (buf, &endp, 10);
-	if (endp != buf && *endp == '.') {
-	    buf = endp + 1;
-	    *patch = (int) strtoul (buf, &buf, 10);
-	}
-    }
-}
-
-/********************************************************************
- *
- * Procedure to determine if the PPP line discipline is registered.
- */
-
-static int
-ppp_registered(void)
-{
-    int local_fd;
-    int mfd = -1;
-    int ret = 0;
-    char slave[16];
-
-    /*
-     * We used to open the serial device and set it to the ppp line
-     * discipline here, in order to create a ppp unit.  But that is
-     * not a good idea - the user might have specified a device that
-     * they can't open (permission, or maybe it doesn't really exist).
-     * So we grab a pty master/slave pair and use that.
-     */
-    if (!get_pty(&mfd, &local_fd, slave, 0)) {
-	no_ppp_msg = "Couldn't determine if PPP is supported (no free ptys)";
-	return 0;
-    }
-
-    /*
-     * Try to put the device into the PPP discipline.
-     */
-    if (ioctl(local_fd, TIOCSETD, &ppp_disc) < 0) {
-	error("ioctl(TIOCSETD(PPP)): %m(%d)", errno);
-    } else
-	ret = 1;
-    
-    close(local_fd);
-    close(mfd);
-    return ret;
-}
-
-/********************************************************************
- *
- * ppp_available - check whether the system has any ppp interfaces
- * (in fact we check whether we can do an ioctl on ppp0).
- */
-
-int ppp_available(void)
-{
-    int s, ok, fd;
-    struct ifreq ifr;
-    int    size;
-    int    my_version, my_modification, my_patch;
-    int osmaj, osmin, ospatch;
-
-    no_ppp_msg = 
-	"This system lacks kernel support for PPP.  This could be because\n"
-	"the PPP kernel module could not be loaded, or because PPP was not\n"
-	"included in the kernel configuration.  If PPP was included as a\n"
-	"module, try `/sbin/modprobe -v ppp'.  If that fails, check that\n"
-	"ppp.o exists in /lib/modules/`uname -r`/net.\n"
-	"See README.linux file in the ppp distribution for more details.\n";
-
-    /* get the kernel version now, since we are called before sys_init */
-    uname(&utsname);
-    osmaj = osmin = ospatch = 0;
-    sscanf(utsname.release, "%d.%d.%d", &osmaj, &osmin, &ospatch);
-    kernel_version = KVERSION(osmaj, osmin, ospatch);
-
-    fd = open("/dev/ppp", O_RDWR);
-#if 0
-    if (fd < 0 && errno == ENOENT) {
-	/* try making it and see if that helps. */
-	if (mknod("/dev/ppp", S_IFCHR | S_IRUSR | S_IWUSR,
-		  makedev(108, 0)) >= 0) {
-	    fd = open("/dev/ppp", O_RDWR);
-	    if (fd >= 0)
-		info("Created /dev/ppp device node");
-	    else
-		unlink("/dev/ppp");	/* didn't work, undo the mknod */
-	} else if (errno == EEXIST) {
-	    fd = open("/dev/ppp", O_RDWR);
-	}
-    }
-#endif /* 0 */
-    if (fd >= 0) {
-	new_style_driver = 1;
-
-	/* XXX should get from driver */
-	driver_version = 2;
-	driver_modification = 4;
-	driver_patch = 0;
-	close(fd);
-	return 1;
-    }
-    if (kernel_version >= KVERSION(2,3,13)) {
-	if (errno == ENOENT)
-	    no_ppp_msg =
-		"pppd is unable to open the /dev/ppp device.\n"
-		"You need to create the /dev/ppp device node by\n"
-		"executing the following command as root:\n"
-		"	mknod /dev/ppp c 108 0\n";
-	return 0;
-    }
-
-/*
- * Open a socket for doing the ioctl operations.
- */    
-    s = socket(AF_INET, SOCK_DGRAM, 0);
-    if (s < 0)
-	return 0;
-    
-    strlcpy (ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name));
-    ok = ioctl(s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0;
-/*
- * If the device did not exist then attempt to create one by putting the
- * current tty into the PPP discipline. If this works then obtain the
- * flags for the device again.
- */
-    if (!ok) {
-	if (ppp_registered()) {
-	    strlcpy (ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name));
-	    ok = ioctl(s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0;
-	}
-    }
-/*
- * Ensure that the hardware address is for PPP and not something else
- */
-    if (ok)
-        ok = ioctl (s, SIOCGIFHWADDR, (caddr_t) &ifr) >= 0;
-
-    if (ok && ((ifr.ifr_hwaddr.sa_family & ~0xFF) != ARPHRD_PPP))
-        ok = 0;
-
-/*
- *  This is the PPP device. Validate the version of the driver at this
- *  point to ensure that this program will work with the driver.
- */
-    if (ok) {
-	char   abBuffer [1024];
-
-	ifr.ifr_data = abBuffer;
-	size = ioctl (s, SIOCGPPPVER, (caddr_t) &ifr);
-	if (size < 0) {
-	    error("Couldn't read driver version: %m");
-	    ok = 0;
-	    no_ppp_msg = "Sorry, couldn't verify kernel driver version\n";
-
-	} else {
-	    decode_version(abBuffer,
-			   &driver_version,
-			   &driver_modification,
-			   &driver_patch);
-/*
- * Validate the version of the driver against the version that we used.
- */
-	    decode_version(VERSION,
-			   &my_version,
-			   &my_modification,
-			   &my_patch);
-
-	    /* The version numbers must match */
-	    if (driver_version != my_version)
-		ok = 0;
-      
-	    /* The modification levels must be legal */
-	    if (driver_modification < 3) {
-		if (driver_modification >= 2) {
-		    /* we can cope with 2.2.0 and above */
-		    driver_is_old = 1;
-		} else {
-		    ok = 0;
-		}
-	    }
-
-	    close (s);
-	    if (!ok) {
-		slprintf(route_buffer, sizeof(route_buffer),
-			 "Sorry - PPP driver version %d.%d.%d is out of date\n",
-			 driver_version, driver_modification, driver_patch);
-
-		no_ppp_msg = route_buffer;
-	    }
-	}
-    }
-    return ok;
-}
-
-/********************************************************************
- *
- * Update the wtmp file with the appropriate user name and tty device.
- */
-
-void logwtmp (const char *line, const char *name, const char *host)
-{
-    struct utmp ut, *utp;
-    pid_t  mypid = getpid();
-#if __GLIBC__ < 2
-    int    wtmp;
-#endif
-
-/*
- * Update the signon database for users.
- * Christoph Lameter: Copied from poeigl-1.36 Jan 3, 1996
- */
-    utmpname(_PATH_UTMP);
-    setutent();
-    while ((utp = getutent()) && (utp->ut_pid != mypid))
-        /* nothing */;
-
-    /* Is this call really necessary? There is another one after the 'put' */
-    endutent();
-    
-    if (utp)
-	memcpy(&ut, utp, sizeof(ut));
-    else
-	/* some gettys/telnetds don't initialize utmp... */
-	memset(&ut, 0, sizeof(ut));
-
-    if (ut.ut_id[0] == 0)
-	strncpy(ut.ut_id, line + 3, sizeof(ut.ut_id));
-	
-    strncpy(ut.ut_user, name, sizeof(ut.ut_user));
-    strncpy(ut.ut_line, line, sizeof(ut.ut_line));
-
-    time(&ut.ut_time);
-
-    ut.ut_type = USER_PROCESS;
-    ut.ut_pid  = mypid;
-
-    /* Insert the host name if one is supplied */
-    if (*host)
-	strncpy (ut.ut_host, host, sizeof(ut.ut_host));
-
-    /* Insert the IP address of the remote system if IP is enabled */
-    if (ipcp_protent.enabled_flag && ipcp_hisoptions[0].neg_addr)
-	memcpy(&ut.ut_addr, (char *) &ipcp_hisoptions[0].hisaddr,
-		 sizeof(ut.ut_addr));
-	
-    /* CL: Makes sure that the logout works */
-    if (*host == 0 && *name==0)
-	ut.ut_host[0]=0;
-
-    pututline(&ut);
-    endutent();
-/*
- * Update the wtmp file.
- */
-#if __GLIBC__ >= 2
-    updwtmp(_PATH_WTMP, &ut);
-#else
-    wtmp = open(_PATH_WTMP, O_APPEND|O_WRONLY);
-    if (wtmp >= 0) {
-	flock(wtmp, LOCK_EX);
-
-	if (write (wtmp, (char *)&ut, sizeof(ut)) != sizeof(ut))
-	    warn("error writing %s: %m", _PATH_WTMP);
-
-	flock(wtmp, LOCK_UN);
-
-	close (wtmp);
-    }
-#endif
-}
-
-
-/********************************************************************
- *
- * sifvjcomp - config tcp header compression
- */
-
-int sifvjcomp (int u, int vjcomp, int cidcomp, int maxcid)
-{
-    u_int x = get_flags(ppp_dev_fd);
-
-    if (vjcomp) {
-        if (ioctl (ppp_dev_fd, PPPIOCSMAXCID, (caddr_t) &maxcid) < 0) {
-	    if (! ok_error (errno))
-		error("ioctl(PPPIOCSMAXCID): %m(%d)", errno);
-	    vjcomp = 0;
-	}
-    }
-
-    x = vjcomp  ? x | SC_COMP_TCP     : x &~ SC_COMP_TCP;
-    x = cidcomp ? x & ~SC_NO_TCP_CCID : x | SC_NO_TCP_CCID;
-    set_flags (ppp_dev_fd, x);
-
-    return 1;
-}
-
-/********************************************************************
- *
- * sifup - Config the interface up and enable IP packets to pass.
- */
-
-int sifup(int u)
-{
-    struct ifreq ifr;
-
-    memset (&ifr, '\0', sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-    if (ioctl(sock_fd, SIOCGIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl (SIOCGIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-
-    ifr.ifr_flags |= (IFF_UP | IFF_POINTOPOINT);
-    if (ioctl(sock_fd, SIOCSIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(SIOCSIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-    if_is_up++;
-
-    return 1;
-}
-
-/********************************************************************
- *
- * sifdown - Disable the indicated protocol and config the interface
- *	     down if there are no remaining protocols.
- */
-
-int sifdown (int u)
-{
-    struct ifreq ifr;
-
-    if (if_is_up && --if_is_up > 0)
-	return 1;
-
-    memset (&ifr, '\0', sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-    if (ioctl(sock_fd, SIOCGIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl (SIOCGIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-
-    ifr.ifr_flags &= ~IFF_UP;
-    ifr.ifr_flags |= IFF_POINTOPOINT;
-    if (ioctl(sock_fd, SIOCSIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(SIOCSIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-    return 1;
-}
-
-/********************************************************************
- *
- * sifaddr - Config the interface IP addresses and netmask.
- */
-
-int sifaddr (int unit, u_int32_t our_adr, u_int32_t his_adr,
-	     u_int32_t net_mask)
-{
-    struct ifreq   ifr; 
-    struct rtentry rt;
-    
-    memset (&ifr, '\0', sizeof (ifr));
-    memset (&rt,  '\0', sizeof (rt));
-    
-    SET_SA_FAMILY (ifr.ifr_addr,    AF_INET); 
-    SET_SA_FAMILY (ifr.ifr_dstaddr, AF_INET); 
-    SET_SA_FAMILY (ifr.ifr_netmask, AF_INET); 
-
-    strlcpy (ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-/*
- *  Set our IP address
- */
-    SIN_ADDR(ifr.ifr_addr) = our_adr;
-    if (ioctl(sock_fd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	if (errno != EEXIST) {
-	    if (! ok_error (errno))
-		error("ioctl(SIOCSIFADDR): %m(%d)", errno);
-	}
-        else {
-	    warn("ioctl(SIOCSIFADDR): Address already exists");
-	}
-        return (0);
-    }
-/*
- *  Set the gateway address
- */
-    SIN_ADDR(ifr.ifr_dstaddr) = his_adr;
-    if (ioctl(sock_fd, SIOCSIFDSTADDR, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(SIOCSIFDSTADDR): %m(%d)", errno); 
-	return (0);
-    } 
-/*
- *  Set the netmask.
- *  For recent kernels, force the netmask to 255.255.255.255.
- */
-    if (kernel_version >= KVERSION(2,1,16))
-	net_mask = ~0L;
-    if (net_mask != 0) {
-	SIN_ADDR(ifr.ifr_netmask) = net_mask;
-	if (ioctl(sock_fd, SIOCSIFNETMASK, (caddr_t) &ifr) < 0) {
-	    if (! ok_error (errno))
-		error("ioctl(SIOCSIFNETMASK): %m(%d)", errno); 
-	    return (0);
-	} 
-    }
-/*
- *  Add the device route
- */
-    if (kernel_version < KVERSION(2,1,16)) {
-	SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-	SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-	rt.rt_dev = ifname;
-
-	SIN_ADDR(rt.rt_gateway) = 0L;
-	SIN_ADDR(rt.rt_dst)     = his_adr;
-	rt.rt_flags = RTF_UP | RTF_HOST;
-
-	if (kernel_version > KVERSION(2,1,0)) {
-	    SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	    SIN_ADDR(rt.rt_genmask) = -1L;
-	}
-
-	if (ioctl(sock_fd, SIOCADDRT, &rt) < 0) {
-	    if (! ok_error (errno))
-		error("ioctl(SIOCADDRT) device route: %m(%d)", errno);
-	    return (0);
-	}
-    }
-
-    /* set ip_dynaddr in demand mode if address changes */
-    if (demand && tune_kernel && !dynaddr_set
-	&& our_old_addr && our_old_addr != our_adr) {
-	/* set ip_dynaddr if possible */
-	char *path;
-	int fd;
-
-	path = path_to_procfs("/sys/net/ipv4/ip_dynaddr");
-	if (path != 0 && (fd = open(path, O_WRONLY)) >= 0) {
-	    if (write(fd, "1", 1) != 1)
-		error("Couldn't enable dynamic IP addressing: %m");
-	    close(fd);
-	}
-	dynaddr_set = 1;	/* only 1 attempt */
-    }
-    our_old_addr = 0;
-
-    return 1;
-}
-
-/********************************************************************
- *
- * cifaddr - Clear the interface IP addresses, and delete routes
- * through the interface if possible.
- */
-
-int cifaddr (int unit, u_int32_t our_adr, u_int32_t his_adr)
-{
-    struct ifreq ifr;
-
-    if (kernel_version < KVERSION(2,1,16)) {
-/*
- *  Delete the route through the device
- */
-	struct rtentry rt;
-	memset (&rt, '\0', sizeof (rt));
-
-	SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-	SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-	rt.rt_dev = ifname;
-
-	SIN_ADDR(rt.rt_gateway) = 0;
-	SIN_ADDR(rt.rt_dst)     = his_adr;
-	rt.rt_flags = RTF_UP | RTF_HOST;
-
-	if (kernel_version > KVERSION(2,1,0)) {
-	    SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	    SIN_ADDR(rt.rt_genmask) = -1L;
-	}
-
-	if (ioctl(sock_fd, SIOCDELRT, &rt) < 0 && errno != ESRCH) {
-	    if (still_ppp() && ! ok_error (errno))
-		error("ioctl(SIOCDELRT) device route: %m(%d)", errno);
-	    return (0);
-	}
-    }
-
-    /* This way it is possible to have an IPX-only or IPv6-only interface */
-    memset(&ifr, 0, sizeof(ifr));
-    SET_SA_FAMILY(ifr.ifr_addr, AF_INET);
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    
-    if (ioctl(sock_fd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno)) {
-	    error("ioctl(SIOCSIFADDR): %m(%d)", errno);
-	    return 0;
-	}
-    }
-
-    our_old_addr = our_adr;
-
-    return 1;
-}
-
-#ifdef INET6
-/********************************************************************
- * 
- * sif6addr - Config the interface with an IPv6 link-local address
- */
-int sif6addr (int unit, eui64_t our_eui64, eui64_t his_eui64)
-{
-    struct in6_ifreq ifr6;
-    struct ifreq ifr;
-    struct in6_rtmsg rt6;
-
-    if (sock6_fd < 0) {
-	errno = -sock6_fd;
-	error("IPv6 socket creation failed: %m");
-	return 0;
-    }
-    memset(&ifr, 0, sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sock6_fd, SIOCGIFINDEX, (caddr_t) &ifr) < 0) {
-	error("sif6addr: ioctl(SIOCGIFINDEX): %m (%d)", errno);
-	return 0;
-    }
-    
-    /* Local interface */
-    memset(&ifr6, 0, sizeof(ifr6));
-    IN6_LLADDR_FROM_EUI64(ifr6.ifr6_addr, our_eui64);
-    ifr6.ifr6_ifindex = ifr.ifr_ifindex;
-    ifr6.ifr6_prefixlen = 10;
-
-    if (ioctl(sock6_fd, SIOCSIFADDR, &ifr6) < 0) {
-	error("sif6addr: ioctl(SIOCSIFADDR): %m (%d)", errno);
-	return 0;
-    }
-    
-    /* Route to remote host */
-    memset(&rt6, 0, sizeof(rt6));
-    IN6_LLADDR_FROM_EUI64(rt6.rtmsg_dst, his_eui64);
-    rt6.rtmsg_flags = RTF_UP;
-    rt6.rtmsg_dst_len = 10;
-    rt6.rtmsg_ifindex = ifr.ifr_ifindex;
-    rt6.rtmsg_metric = 1;
-    
-    if (ioctl(sock6_fd, SIOCADDRT, &rt6) < 0) {
-	error("sif6addr: ioctl(SIOCADDRT): %m (%d)", errno);
-	return 0;
-    }
-
-    return 1;
-}
-
-
-/********************************************************************
- *
- * cif6addr - Remove IPv6 address from interface
- */
-int cif6addr (int unit, eui64_t our_eui64, eui64_t his_eui64)
-{
-    struct ifreq ifr;
-    struct in6_ifreq ifr6;
-
-    if (sock6_fd < 0) {
-	errno = -sock6_fd;
-	error("IPv6 socket creation failed: %m");
-	return 0;
-    }
-    memset(&ifr, 0, sizeof(ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sock6_fd, SIOCGIFINDEX, (caddr_t) &ifr) < 0) {
-	error("cif6addr: ioctl(SIOCGIFINDEX): %m (%d)", errno);
-	return 0;
-    }
-    
-    memset(&ifr6, 0, sizeof(ifr6));
-    IN6_LLADDR_FROM_EUI64(ifr6.ifr6_addr, our_eui64);
-    ifr6.ifr6_ifindex = ifr.ifr_ifindex;
-    ifr6.ifr6_prefixlen = 10;
-
-    if (ioctl(sock6_fd, SIOCDIFADDR, &ifr6) < 0) {
-	if (errno != EADDRNOTAVAIL) {
-	    if (! ok_error (errno))
-		error("cif6addr: ioctl(SIOCDIFADDR): %m (%d)", errno);
-	}
-        else {
-	    warn("cif6addr: ioctl(SIOCDIFADDR): No such address");
-	}
-        return (0);
-    }
-    return 1;
-}
-#endif /* INET6 */
-
-/*
- * get_pty - get a pty master/slave pair and chown the slave side
- * to the uid given.  Assumes slave_name points to >= 16 bytes of space.
- */
-int
-get_pty(master_fdp, slave_fdp, slave_name, uid)
-    int *master_fdp;
-    int *slave_fdp;
-    char *slave_name;
-    int uid;
-{
-    int i, mfd, sfd = -1;
-    char pty_name[16];
-    struct termios tios;
-
-#ifdef TIOCGPTN
-    /*
-     * Try the unix98 way first.
-     */
-    mfd = open("/dev/ptmx", O_RDWR);
-    if (mfd >= 0) {
-	int ptn;
-	if (ioctl(mfd, TIOCGPTN, &ptn) >= 0) {
-	    slprintf(pty_name, sizeof(pty_name), "/dev/pts/%d", ptn);
-	    chmod(pty_name, S_IRUSR | S_IWUSR);
-#ifdef TIOCSPTLCK
-	    ptn = 0;
-	    if (ioctl(mfd, TIOCSPTLCK, &ptn) < 0)
-		warn("Couldn't unlock pty slave %s: %m", pty_name);
-#endif
-	    if ((sfd = open(pty_name, O_RDWR | O_NOCTTY)) < 0)
-		warn("Couldn't open pty slave %s: %m", pty_name);
-	}
-    }
-#endif /* TIOCGPTN */
-
-    if (sfd < 0) {
-	/* the old way - scan through the pty name space */
-	for (i = 0; i < 64; ++i) {
-	    slprintf(pty_name, sizeof(pty_name), "/dev/pty%c%x",
-		     'p' + i / 16, i % 16);
-	    mfd = open(pty_name, O_RDWR, 0);
-	    if (mfd >= 0) {
-		pty_name[5] = 't';
-		sfd = open(pty_name, O_RDWR | O_NOCTTY, 0);
-		if (sfd >= 0) {
-		    fchown(sfd, uid, -1);
-		    fchmod(sfd, S_IRUSR | S_IWUSR);
-		    break;
-		}
-		close(mfd);
-	    }
-	}
-    }
-
-    if (sfd < 0)
-	return 0;
-
-    strlcpy(slave_name, pty_name, 16);
-    *master_fdp = mfd;
-    *slave_fdp = sfd;
-    if (tcgetattr(sfd, &tios) == 0) {
-	tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB);
-	tios.c_cflag |= CS8 | CREAD | CLOCAL;
-	tios.c_iflag  = IGNPAR;
-	tios.c_oflag  = 0;
-	tios.c_lflag  = 0;
-	if (tcsetattr(sfd, TCSAFLUSH, &tios) < 0)
-	    warn("couldn't set attributes on pty: %m");
-    } else
-	warn("couldn't get attributes on pty: %m");
-
-    return 1;
-}
-
-/********************************************************************
- *
- * open_loopback - open the device we use for getting packets
- * in demand mode.  Under Linux, we use a pty master/slave pair.
- */
-int
-open_ppp_loopback(void)
-{
-    int flags;
-
-    looped = 1;
-    if (new_style_driver) {
-	/* allocate ourselves a ppp unit */
-	if (make_ppp_unit() < 0)
-	    die(1);
-	set_flags(ppp_dev_fd, SC_LOOP_TRAFFIC);
-	set_kdebugflag(kdebugflag);
-	ppp_fd = -1;
-	return ppp_dev_fd;
-    }
-
-    if (!get_pty(&master_fd, &slave_fd, loop_name, 0))
-	fatal("No free pty for loopback");
-    SYSDEBUG(("using %s for loopback", loop_name));
-
-    set_ppp_fd(slave_fd);
-
-    flags = fcntl(master_fd, F_GETFL);
-    if (flags == -1 ||
-	fcntl(master_fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	warn("couldn't set master loopback to nonblock: %m(%d)", errno);
-
-    flags = fcntl(ppp_fd, F_GETFL);
-    if (flags == -1 ||
-	fcntl(ppp_fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	warn("couldn't set slave loopback to nonblock: %m(%d)", errno);
-
-    if (ioctl(ppp_fd, TIOCSETD, &ppp_disc) < 0)
-	fatal("ioctl(TIOCSETD): %m(%d)", errno);
-/*
- * Find out which interface we were given.
- */
-    if (ioctl(ppp_fd, PPPIOCGUNIT, &ifunit) < 0)
-	fatal("ioctl(PPPIOCGUNIT): %m(%d)", errno);
-/*
- * Enable debug in the driver if requested.
- */
-    set_kdebugflag (kdebugflag);
-
-    return master_fd;
-}
-
-/********************************************************************
- *
- * restore_loop - reattach the ppp unit to the loopback.
- *
- * The kernel ppp driver automatically reattaches the ppp unit to
- * the loopback if the serial port is set to a line discipline other
- * than ppp, or if it detects a modem hangup.  The former will happen
- * in disestablish_ppp if the latter hasn't already happened, so we
- * shouldn't need to do anything.
- *
- * Just to be sure, set the real serial port to the normal discipline.
- */
-
-static void
-restore_loop(void)
-{
-    looped = 1;
-    if (new_style_driver) {
-	set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) | SC_LOOP_TRAFFIC);
-	return;
-    }
-    if (ppp_fd != slave_fd) {
-	(void) ioctl(ppp_fd, TIOCSETD, &tty_disc);
-	set_ppp_fd(slave_fd);
-    }
-}
-
-/********************************************************************
- *
- * sifnpmode - Set the mode for handling packets for a given NP.
- */
-
-int
-sifnpmode(u, proto, mode)
-    int u;
-    int proto;
-    enum NPmode mode;
-{
-    struct npioctl npi;
-
-    npi.protocol = proto;
-    npi.mode     = mode;
-    if (ioctl(ppp_dev_fd, PPPIOCSNPMODE, (caddr_t) &npi) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(PPPIOCSNPMODE, %d, %d): %m (%d)",
-		   proto, mode, errno);
-	return 0;
-    }
-    return 1;
-}
-
-
-/********************************************************************
- *
- * sipxfaddr - Config the interface IPX networknumber
- */
-
-int sipxfaddr (int unit, unsigned long int network, unsigned char * node )
-{
-    int    result = 1;
-
-#ifdef IPX_CHANGE
-    int    skfd; 
-    struct ifreq         ifr;
-    struct sockaddr_ipx *sipx = (struct sockaddr_ipx *) &ifr.ifr_addr;
-
-    skfd = socket (AF_IPX, SOCK_DGRAM, 0);
-    if (skfd < 0) { 
-	if (! ok_error (errno))
-	    dbglog("socket(AF_IPX): %m (%d)", errno);
-	result = 0;
-    }
-    else {
-	memset (&ifr, '\0', sizeof (ifr));
-	strlcpy (ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-
-	memcpy (sipx->sipx_node, node, IPX_NODE_LEN);
-	sipx->sipx_family  = AF_IPX;
-	sipx->sipx_port    = 0;
-	sipx->sipx_network = htonl (network);
-	sipx->sipx_type    = IPX_FRAME_ETHERII;
-	sipx->sipx_action  = IPX_CRTITF;
-/*
- *  Set the IPX device
- */
-	if (ioctl(skfd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	    result = 0;
-	    if (errno != EEXIST) {
-		if (! ok_error (errno))
-		    dbglog("ioctl(SIOCSIFADDR, CRTITF): %m (%d)", errno);
-	    }
-	    else {
-		warn("ioctl(SIOCSIFADDR, CRTITF): Address already exists");
-	    }
-	}
-	close (skfd);
-    }
-#endif
-    return result;
-}
-
-/********************************************************************
- *
- * cipxfaddr - Clear the information for the IPX network. The IPX routes
- *	       are removed and the device is no longer able to pass IPX
- *	       frames.
- */
-
-int cipxfaddr (int unit)
-{
-    int    result = 1;
-
-#ifdef IPX_CHANGE
-    int    skfd; 
-    struct ifreq         ifr;
-    struct sockaddr_ipx *sipx = (struct sockaddr_ipx *) &ifr.ifr_addr;
-
-    skfd = socket (AF_IPX, SOCK_DGRAM, 0);
-    if (skfd < 0) { 
-	if (! ok_error (errno))
-	    dbglog("socket(AF_IPX): %m (%d)", errno);
-	result = 0;
-    }
-    else {
-	memset (&ifr, '\0', sizeof (ifr));
-	strlcpy (ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-
-	sipx->sipx_type    = IPX_FRAME_ETHERII;
-	sipx->sipx_action  = IPX_DLTITF;
-	sipx->sipx_family  = AF_IPX;
-/*
- *  Set the IPX device
- */
-	if (ioctl(skfd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	    if (! ok_error (errno))
-		info("ioctl(SIOCSIFADDR, IPX_DLTITF): %m (%d)", errno);
-	    result = 0;
-	}
-	close (skfd);
-    }
-#endif
-    return result;
-}
-
-/*
- * Use the hostname as part of the random number seed.
- */
-int
-get_host_seed()
-{
-    int h;
-    char *p = hostname;
-
-    h = 407;
-    for (p = hostname; *p != 0; ++p)
-	h = h * 37 + *p;
-    return h;
-}
-
-/********************************************************************
- *
- * sys_check_options - check the options that the user specified
- */
-
-int
-sys_check_options(void)
-{
-#ifdef IPX_CHANGE
-/*
- * Disable the IPX protocol if the support is not present in the kernel.
- */
-    char *path;
-
-    if (ipxcp_protent.enabled_flag) {
-	struct stat stat_buf;
-        if ((path = path_to_procfs("/net/ipx_interface")) == 0
-	    || lstat(path, &stat_buf) < 0) {
-	    error("IPX support is not present in the kernel\n");
-	    ipxcp_protent.enabled_flag = 0;
-	}
-    }
-#endif
-    if (demand && driver_is_old) {
-	option_error("demand dialling is not supported by kernel driver "
-		     "version %d.%d.%d", driver_version, driver_modification,
-		     driver_patch);
-	return 0;
-    }
-    if (multilink && !new_style_driver) {
-	warn("Warning: multilink is not supported by the kernel driver");
-	multilink = 0;
-    }
-    return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/sys-solaris.c b/mdk-stage1/ppp/pppd/sys-solaris.c
deleted file mode 100644
index da5f9c45a..000000000
--- a/mdk-stage1/ppp/pppd/sys-solaris.c
+++ /dev/null
@@ -1,2737 +0,0 @@
-/*
- * System-dependent procedures for pppd under Solaris 2.
- *
- * Parts re-written by Adi Masputra <adi.masputra@sun.com>, based on 
- * the original sys-svr4.c
- *
- * Copyright (c) 2000 by Sun Microsystems, Inc.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  
- *
- * SUN MAKES NO REPRESENTATION OR WARRANTIES ABOUT THE SUITABILITY OF
- * THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
- * TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
- * PARTICULAR PURPOSE, OR NON-INFRINGEMENT.  SUN SHALL NOT BE LIABLE FOR
- * ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR
- * DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- */
-
-#define RCSID	"$Id$"
-
-#include <limits.h>
-#include <stdio.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <termios.h>
-#ifndef CRTSCTS
-#include <sys/termiox.h>
-#endif
-#include <signal.h>
-#include <utmpx.h>
-#include <sys/types.h>
-#include <sys/ioccom.h>
-#include <sys/stream.h>
-#include <sys/stropts.h>
-#include <sys/socket.h>
-#include <sys/sockio.h>
-#include <sys/sysmacros.h>
-#include <sys/systeminfo.h>
-#include <sys/dlpi.h>
-#include <sys/stat.h>
-#include <sys/mkdev.h>
-#include <net/if.h>
-#include <net/if_arp.h>
-#include <net/route.h>
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include <netinet/in.h>
-#ifdef SOL2
-#include <sys/tihdr.h>
-#include <sys/tiuser.h>
-#include <inet/common.h>
-#include <inet/mib2.h>
-#include <sys/ethernet.h>
-#endif
-
-#include "pppd.h"
-#include "fsm.h"
-#include "lcp.h"
-#include "ipcp.h"
-#include "ccp.h"
-
-#if !defined(PPP_DRV_NAME)
-#define PPP_DRV_NAME	"ppp"
-#endif /* !defined(PPP_DRV_NAME) */
-
-#if !defined(PPP_DEV_NAME)
-#define PPP_DEV_NAME	"/dev/" PPP_DRV_NAME
-#endif /* !defined(PPP_DEV_NAME) */
-
-#if !defined(AHDLC_MOD_NAME)
-#define AHDLC_MOD_NAME	"ppp_ahdl"
-#endif /* !defined(AHDLC_MOD_NAME) */
-
-#if !defined(COMP_MOD_NAME)
-#define COMP_MOD_NAME	"ppp_comp"
-#endif /* !defined(COMP_MOD_NAME) */
-
-#if !defined(IP_DEV_NAME)
-#define	IP_DEV_NAME	"/dev/ip"
-#endif /* !defined(IP_DEV_NAME) */
-
-#if !defined(IP_MOD_NAME)
-#define	IP_MOD_NAME	"ip"
-#endif /* !defined(IP_MOD_NAME) */
-
-#if !defined(UDP_DEV_NAME) && defined(SOL2)
-#define	UDP_DEV_NAME	"/dev/udp"
-#endif /* !defined(UDP_DEV_NAME) && defined(SOL2) */
-
-#if !defined(UDP6_DEV_NAME) && defined(SOL2)
-#define	UDP6_DEV_NAME	"/dev/udp6"
-#endif /* !defined(UDP6_DEV_NAME) && defined(SOL2) */
-
-static const char rcsid[] = RCSID;
-
-#if defined(SOL2)
-/*
- * "/dev/udp" is used as a multiplexor to PLINK the interface stream
- * under. It is used in place of "/dev/ip" since STREAMS will not let
- * a driver be PLINK'ed under itself, and "/dev/ip" is typically the
- * driver at the bottom of the tunneling interfaces stream.
- */
-static char *mux_dev_name = UDP_DEV_NAME;
-#else
-static char *mux_dev_name = IP_DEV_NAME;
-#endif
-static int	pppfd;
-static int	fdmuxid = -1;
-static int	ipfd;
-static int	ipmuxid = -1;
-
-#if defined(INET6) && defined(SOL2)
-static int	ip6fd;		/* IP file descriptor */
-static int	ip6muxid = -1;	/* Multiplexer file descriptor */
-static int	if6_is_up = 0;	/* IPv6 interface has been marked up */
-
-#define _IN6_LLX_FROM_EUI64(l, s, eui64, as) do {	\
-	s->sin6_addr.s6_addr32[0] = htonl(as); 	\
-	eui64_copy(eui64, s->sin6_addr.s6_addr32[2]);	\
-	s->sin6_family = AF_INET6;		\
-	l.lifr_addr.ss_family = AF_INET6;	\
-	l.lifr_addrlen = 10;			\
-	l.lifr_addr = laddr;			\
-	} while (0)
-
-#define IN6_LLADDR_FROM_EUI64(l, s, eui64)  \
-    _IN6_LLX_FROM_EUI64(l, s, eui64, 0xfe800000)
-
-#define IN6_LLTOKEN_FROM_EUI64(l, s, eui64) \
-    _IN6_LLX_FROM_EUI64(l, s, eui64, 0)
-
-#endif /* defined(INET6) && defined(SOL2) */
-
-#if defined(INET6) && defined(SOL2)
-static char	first_ether_name[LIFNAMSIZ];	/* Solaris 8 and above */
-#else
-static char	first_ether_name[IFNAMSIZ];	/* Before Solaris 8 */
-#define MAXIFS		256			/* Max # of interfaces */
-#endif /* defined(INET6) && defined(SOL2) */
-
-static int	restore_term;
-static struct termios inittermios;
-#ifndef CRTSCTS
-static struct termiox inittermiox;
-static int	termiox_ok;
-#endif
-static struct winsize wsinfo;	/* Initial window size info */
-static pid_t	tty_sid;	/* original session ID for terminal */
-
-extern u_char	inpacket_buf[];	/* borrowed from main.c */
-
-#define MAX_POLLFDS	32
-static struct pollfd pollfds[MAX_POLLFDS];
-static int n_pollfds;
-
-static int	link_mtu, link_mru;
-
-#define NMODULES	32
-static int	tty_nmodules;
-static char	tty_modules[NMODULES][FMNAMESZ+1];
-static int	tty_npushed;
-
-static int	if_is_up;	/* Interface has been marked up */
-static u_int32_t remote_addr;		/* IP address of peer */
-static u_int32_t default_route_gateway;	/* Gateway for default route added */
-static u_int32_t proxy_arp_addr;	/* Addr for proxy arp entry added */
-
-/* Prototypes for procedures local to this file. */
-static int translate_speed __P((int));
-static int baud_rate_of __P((int));
-static int get_ether_addr __P((u_int32_t, struct sockaddr *));
-static int get_hw_addr __P((char *, u_int32_t, struct sockaddr *));
-static int get_hw_addr_dlpi __P((char *, struct sockaddr *));
-static int dlpi_attach __P((int, int));
-static int dlpi_info_req __P((int));
-static int dlpi_get_reply __P((int, union DL_primitives *, int, int));
-static int strioctl __P((int, int, void *, int, int));
-
-#ifdef SOL2
-/*
- * sifppa - Sets interface ppa
- *
- * without setting the ppa, ip module will return EINVAL upon setting the
- * interface UP (SIOCSxIFFLAGS). This is because ip module in 2.8 expects
- * two DLPI_INFO_REQ to be sent down to the driver (below ip) before
- * IFF_UP can be set. Plumbing the device causes one DLPI_INFO_REQ to
- * be sent down, and the second DLPI_INFO_REQ is sent upon receiving
- * IF_UNITSEL (old) or SIOCSLIFNAME (new) ioctls. Such setting of the ppa
- * is required because the ppp DLPI provider advertises itself as
- * a DLPI style 2 type, which requires a point of attachment to be
- * specified. The only way the user can specify a point of attachment
- * is via SIOCSLIFNAME or IF_UNITSEL.
- *
- * Such changes in the behavior of ip module was made to meet new or
- * evolving standards requirements.
- *
- */
-static int
-sifppa(fd, ppa)
-    int fd;
-    int ppa;
-{
-    return (int)ioctl(fd, IF_UNITSEL, (char *)&ppa);
-}
-#endif /* SOL2 */
-
-#if defined(SOL2) && defined(INET6)
-/*
- * get_first_ethernet - returns the first Ethernet interface name found in 
- * the system, or NULL if none is found
- *
- * NOTE: This is the lifreq version (Solaris 8 and above)
- */
-char *
-get_first_ethernet()
-{
-    struct lifnum lifn;
-    struct lifconf lifc;
-    struct lifreq *plifreq;
-    struct lifreq lifr;
-    int	fd, num_ifs, i, found;
-    uint_t fl, req_size;
-    char *req;
-
-    fd = socket(AF_INET, SOCK_DGRAM, 0);
-    if (fd < 0) {
-	return 0;
-    }
-
-    /*
-     * Find out how many interfaces are running
-     */
-    lifn.lifn_family = AF_UNSPEC;
-    lifn.lifn_flags = LIFC_NOXMIT;
-    if (ioctl(fd, SIOCGLIFNUM, &lifn) < 0) {
-	close(fd);
-	error("could not determine number of interfaces: %m");
-	return 0;
-    }
-
-    num_ifs = lifn.lifn_count;
-    req_size = num_ifs * sizeof(struct lifreq);
-    req = malloc(req_size);
-    if (req == NULL) {
-	close(fd);
-	error("out of memory");
-	return 0;
-    }
-
-    /*
-     * Get interface configuration info for all interfaces
-     */
-    lifc.lifc_family = AF_UNSPEC;
-    lifc.lifc_flags = LIFC_NOXMIT;
-    lifc.lifc_len = req_size;
-    lifc.lifc_buf = req;
-    if (ioctl(fd, SIOCGLIFCONF, &lifc) < 0) {
-	close(fd);
-	free(req);
-	error("SIOCGLIFCONF: %m");
-	return 0;
-    }
-
-    /*
-     * And traverse each interface to look specifically for the first
-     * occurence of an Ethernet interface which has been marked up
-     */
-    plifreq = lifc.lifc_req;
-    found = 0;
-    for (i = lifc.lifc_len / sizeof(struct lifreq); i > 0; i--, plifreq++) {
-
-	if (strchr(plifreq->lifr_name, ':') != NULL)
-	    continue;
-
-	memset(&lifr, 0, sizeof(lifr));
-	strncpy(lifr.lifr_name, plifreq->lifr_name, sizeof(lifr.lifr_name));
-	if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) {
-	    close(fd);
-	    free(req);
-	    error("SIOCGLIFFLAGS: %m");
-	    return 0;
-	}
-	fl = lifr.lifr_flags;
-
-	if ((fl & (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP))
-		!= (IFF_UP | IFF_BROADCAST))
-	    continue;
-
-	found = 1;
-	break;
-    }
-    free(req);
-    close(fd);
-
-    if (found) {
-	strncpy(first_ether_name, lifr.lifr_name, sizeof(first_ether_name));
-	return (char *)first_ether_name;
-    } else
-	return NULL;
-}
-#else
-/*
- * get_first_ethernet - returns the first Ethernet interface name found in 
- * the system, or NULL if none is found
- *
- * NOTE: This is the ifreq version (before Solaris 8). 
- */
-char *
-get_first_ethernet()
-{
-    struct ifconf ifc;
-    struct ifreq *pifreq;
-    struct ifreq ifr;
-    int	fd, num_ifs, i, found;
-    uint_t fl, req_size;
-    char *req;
-
-    fd = socket(AF_INET, SOCK_DGRAM, 0);
-    if (fd < 0) {
-	return 0;
-    }
-
-    /*
-     * Find out how many interfaces are running
-     */
-    if (ioctl(fd, SIOCGIFNUM, (char *)&num_ifs) < 0) {
-	num_ifs = MAXIFS;
-    }
-
-    req_size = num_ifs * sizeof(struct ifreq);
-    req = malloc(req_size);
-    if (req == NULL) {
-	close(fd);
-	error("out of memory");
-	return 0;
-    }
-
-    /*
-     * Get interface configuration info for all interfaces
-     */
-    ifc.ifc_len = req_size;
-    ifc.ifc_buf = req;
-    if (ioctl(fd, SIOCGIFCONF, &ifc) < 0) {
-	close(fd);
-	free(req);
-	error("SIOCGIFCONF: %m");
-	return 0;
-    }
-
-    /*
-     * And traverse each interface to look specifically for the first
-     * occurence of an Ethernet interface which has been marked up
-     */
-    pifreq = ifc.ifc_req;
-    found = 0;
-    for (i = ifc.ifc_len / sizeof(struct ifreq); i > 0; i--, pifreq++) {
-
-	if (strchr(pifreq->ifr_name, ':') != NULL)
-	    continue;
-
-	memset(&ifr, 0, sizeof(ifr));
-	strncpy(ifr.ifr_name, pifreq->ifr_name, sizeof(ifr.ifr_name));
-	if (ioctl(fd, SIOCGIFFLAGS, &ifr) < 0) {
-	    close(fd);
-	    free(req);
-	    error("SIOCGIFFLAGS: %m");
-	    return 0;
-	}
-	fl = ifr.ifr_flags;
-
-	if ((fl & (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP))
-		!= (IFF_UP | IFF_BROADCAST))
-	    continue;
-
-	found = 1;
-	break;
-    }
-    free(req);
-    close(fd);
-
-    if (found) {
-	strncpy(first_ether_name, ifr.ifr_name, sizeof(first_ether_name));
-	return (char *)first_ether_name;
-    } else
-	return NULL;
-}
-#endif /* defined(SOL2) && defined(INET6) */
-
-#if defined(SOL2)
-/*
- * get_if_hwaddr - get the hardware address for the specified
- * network interface device.
- */
-int
-get_if_hwaddr(u_char *addr, char *if_name)
-{
-    struct sockaddr s_eth_addr;
-    struct ether_addr *eth_addr = (struct ether_addr *)&s_eth_addr.sa_data;
-
-    if (if_name == NULL)
-	return -1;
-
-    /*
-     * Send DL_INFO_REQ to the driver to solicit its MAC address
-     */
-    if (!get_hw_addr_dlpi(if_name, &s_eth_addr)) {
-	error("could not obtain hardware address for %s", if_name);
-	return -1;
-    }
-
-    memcpy(addr, eth_addr->ether_addr_octet, 6);
-    return 1;
-}
-#endif /* SOL2 */
-
-#if defined(SOL2) && defined(INET6)
-/*
- * slifname - Sets interface ppa and flags
- *
- * in addition to the comments stated in sifppa(), IFF_IPV6 bit must
- * be set in order to declare this as an IPv6 interface
- */
-static int
-slifname(fd, ppa)
-    int fd;
-    int ppa;
-{
-    struct  lifreq lifr;
-    int	    ret;
-
-    memset(&lifr, 0, sizeof(lifr));
-    ret = ioctl(fd, SIOCGLIFFLAGS, &lifr);
-    if (ret < 0)
-	goto slifname_done;
-
-    lifr.lifr_flags |= IFF_IPV6;
-    lifr.lifr_flags &= ~(IFF_BROADCAST | IFF_IPV4);
-    lifr.lifr_ppa = ppa;
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-
-    ret = ioctl(fd, SIOCSLIFNAME, &lifr);
-
-slifname_done:
-    return ret;
-
-
-}
-
-
-/*
- * ether_to_eui64 - Convert 48-bit Ethernet address into 64-bit EUI
- *
- * walks the list of valid ethernet interfaces, and convert the first
- * found 48-bit MAC address into EUI 64. caller also assumes that
- * the system has a properly configured Ethernet interface for this
- * function to return non-zero.
- */
-int
-ether_to_eui64(eui64_t *p_eui64)
-{
-    struct sockaddr s_eth_addr;
-    struct ether_addr *eth_addr = (struct ether_addr *)&s_eth_addr.sa_data;
-    char *if_name;
-
-    if ((if_name = get_first_ethernet()) == NULL) {
-	error("no persistent id can be found");
-	return 0;
-    }
- 
-    /*
-     * Send DL_INFO_REQ to the driver to solicit its MAC address
-     */
-    if (!get_hw_addr_dlpi(if_name, &s_eth_addr)) {
-	error("could not obtain hardware address for %s", if_name);
-	return 0;
-    }
-
-    /*
-     * And convert the EUI-48 into EUI-64, per RFC 2472 [sec 4.1]
-     */
-    p_eui64->e8[0] = (eth_addr->ether_addr_octet[0] & 0xFF) | 0x02;
-    p_eui64->e8[1] = (eth_addr->ether_addr_octet[1] & 0xFF);
-    p_eui64->e8[2] = (eth_addr->ether_addr_octet[2] & 0xFF);
-    p_eui64->e8[3] = 0xFF;
-    p_eui64->e8[4] = 0xFE;
-    p_eui64->e8[5] = (eth_addr->ether_addr_octet[3] & 0xFF);
-    p_eui64->e8[6] = (eth_addr->ether_addr_octet[4] & 0xFF);
-    p_eui64->e8[7] = (eth_addr->ether_addr_octet[5] & 0xFF);
-
-    return 1;
-}
-#endif /* defined(SOL2) && defined(INET6) */
-
-/*
- * sys_init - System-dependent initialization.
- */
-void
-sys_init()
-{
-    int ifd, x;
-    struct ifreq ifr;
-#if defined(INET6) && defined(SOL2)
-    int i6fd;
-    struct lifreq lifr;
-#endif /* defined(INET6) && defined(SOL2) */
-#if !defined(SOL2)
-    struct {
-	union DL_primitives prim;
-	char space[64];
-    } reply;
-#endif /* !defined(SOL2) */
-
-    ipfd = open(mux_dev_name, O_RDWR, 0);
-    if (ipfd < 0)
-	fatal("Couldn't open IP device: %m");
-
-#if defined(INET6) && defined(SOL2)
-    ip6fd = open(UDP6_DEV_NAME, O_RDWR, 0);
-    if (ip6fd < 0)
-	fatal("Couldn't open IP device (2): %m");
-#endif /* defined(INET6) && defined(SOL2) */
-
-    if (default_device && !notty)
-	tty_sid = getsid((pid_t)0);
-
-    pppfd = open(PPP_DEV_NAME, O_RDWR | O_NONBLOCK, 0);
-    if (pppfd < 0)
-	fatal("Can't open %s: %m", PPP_DEV_NAME);
-    if (kdebugflag & 1) {
-	x = PPPDBG_LOG + PPPDBG_DRIVER;
-	strioctl(pppfd, PPPIO_DEBUG, &x, sizeof(int), 0);
-    }
-
-    /* Assign a new PPA and get its unit number. */
-    if (strioctl(pppfd, PPPIO_NEWPPA, &ifunit, 0, sizeof(int)) < 0)
-	fatal("Can't create new PPP interface: %m");
-
-#if defined(SOL2)
-    /*
-     * Since sys_init() is called prior to ifname being set in main(),
-     * we need to get the ifname now, otherwise slifname(), and others,
-     * will fail, or maybe, I should move them to a later point ?
-     * <adi.masputra@sun.com>
-     */
-    sprintf(ifname, PPP_DRV_NAME "%d", ifunit);
-#endif /* defined(SOL2) */
-    /*
-     * Open the ppp device again and link it under the ip multiplexor.
-     * IP will assign a unit number which hopefully is the same as ifunit.
-     * I don't know any way to be certain they will be the same. :-(
-     */
-    ifd = open(PPP_DEV_NAME, O_RDWR, 0);
-    if (ifd < 0)
-	fatal("Can't open %s (2): %m", PPP_DEV_NAME);
-    if (kdebugflag & 1) {
-	x = PPPDBG_LOG + PPPDBG_DRIVER;
-	strioctl(ifd, PPPIO_DEBUG, &x, sizeof(int), 0);
-    }
-
-#if defined(INET6) && defined(SOL2)
-    i6fd = open(PPP_DEV_NAME, O_RDWR, 0);
-    if (i6fd < 0) {
-	close(ifd);
-	fatal("Can't open %s (3): %m", PPP_DEV_NAME);
-    }
-    if (kdebugflag & 1) {
-	x = PPPDBG_LOG + PPPDBG_DRIVER;
-	strioctl(i6fd, PPPIO_DEBUG, &x, sizeof(int), 0);
-    }
-#endif /* defined(INET6) && defined(SOL2) */
-
-#if defined(SOL2)
-    if (ioctl(ifd, I_PUSH, IP_MOD_NAME) < 0) {
-	close(ifd);
-#if defined(INET6)
-	close(i6fd);
-#endif /* defined(INET6) */
-	fatal("Can't push IP module: %m");
-    }
-
-    /*
-     * Assign ppa according to the unit number returned by ppp device
-     * after plumbing is completed above.
-     */
-    if (sifppa(ifd, ifunit) < 0) {
-        close (ifd);
-#if defined(INET6)
-	close(i6fd);
-#endif /* defined(INET6) */
-        fatal("Can't set ppa for unit %d: %m", ifunit);
-    }
-
-#if defined(INET6)
-    /*
-     * An IPv6 interface is created anyway, even when the user does not 
-     * explicitly enable it. Note that the interface will be marked
-     * IPv6 during slifname().
-     */
-    if (ioctl(i6fd, I_PUSH, IP_MOD_NAME) < 0) {
-	close(ifd);
-	close(i6fd);
-	fatal("Can't push IP module (2): %m");
-    }
-
-    /*
-     * Assign ppa according to the unit number returned by ppp device
-     * after plumbing is completed above. In addition, mark the interface
-     * as an IPv6 interface.
-     */
-    if (slifname(i6fd, ifunit) < 0) {
-	close(ifd);
-	close(i6fd);
-	fatal("Can't set ifname for unit %d: %m", ifunit);
-    }
-#endif /* defined(INET6) */
-
-    ipmuxid = ioctl(ipfd, I_PLINK, ifd);
-    close(ifd);
-    if (ipmuxid < 0) {
-#if defined(INET6)
-	close(i6fd);
-#endif /* defined(INET6) */
-	fatal("Can't I_PLINK PPP device to IP: %m");
-    }
-
-    memset(&ifr, 0, sizeof(ifr));
-    sprintf(ifr.ifr_name, "%s", ifname);
-    ifr.ifr_ip_muxid = ipmuxid;
-
-    /*
-     * In Sol 8 and later, STREAMS dynamic module plumbing feature exists.
-     * This is so that an arbitrary module can be inserted, or deleted, 
-     * between ip module and the device driver without tearing down the 
-     * existing stream. Such feature requires the mux ids, which is set 
-     * by SIOCSIFMUXID (or SIOCLSIFMUXID).
-     */
-    if (ioctl(ipfd, SIOCSIFMUXID, &ifr) < 0) {
-	ioctl(ipfd, I_PUNLINK, ipmuxid);
-#if defined(INET6)
-	close(i6fd);
-#endif /* defined(INET6) */
-	fatal("SIOCSIFMUXID: %m");
-    }
-
-#else /* else if !defined(SOL2) */
-
-    if (dlpi_attach(ifd, ifunit) < 0 ||
-	dlpi_get_reply(ifd, &reply.prim, DL_OK_ACK, sizeof(reply)) < 0) {
-	close(ifd);
-	fatal("Can't attach to ppp%d: %m", ifunit);
-    }
-
-    ipmuxid = ioctl(ipfd, I_LINK, ifd);
-    close(ifd);
-    if (ipmuxid < 0)
-	fatal("Can't link PPP device to IP: %m");
-#endif /* defined(SOL2) */
-
-#if defined(INET6) && defined(SOL2)
-    ip6muxid = ioctl(ip6fd, I_PLINK, i6fd);
-    close(i6fd);
-    if (ip6muxid < 0) {
-	ioctl(ipfd, I_PUNLINK, ipmuxid);
-	fatal("Can't I_PLINK PPP device to IP (2): %m");
-    }
-
-    memset(&lifr, 0, sizeof(lifr));
-    sprintf(lifr.lifr_name, "%s", ifname);
-    lifr.lifr_ip_muxid = ip6muxid;
-
-    /*
-     * Let IP know of the mux id [see comment for SIOCSIFMUXID above]
-     */
-    if (ioctl(ip6fd, SIOCSLIFMUXID, &lifr) < 0) {
-	ioctl(ipfd, I_PUNLINK, ipmuxid);
-	ioctl(ip6fd, I_PUNLINK, ip6muxid);
-	fatal("Can't link PPP device to IP (2): %m");
-    }
-#endif /* defined(INET6) && defined(SOL2) */
-
-#if !defined(SOL2)
-    /* Set the interface name for the link. */
-    slprintf(ifr.ifr_name, sizeof(ifr.ifr_name), PPP_DRV_NAME "%d", ifunit);
-    ifr.ifr_metric = ipmuxid;
-    if (strioctl(ipfd, SIOCSIFNAME, (char *)&ifr, sizeof ifr, 0) < 0)
-	fatal("Can't set interface name %s: %m", ifr.ifr_name);
-#endif /* !defined(SOL2) */
-
-    n_pollfds = 0;
-}
-
-/*
- * sys_cleanup - restore any system state we modified before exiting:
- * mark the interface down, delete default route and/or proxy arp entry.
- * This should call die() because it's called from die().
- */
-void
-sys_cleanup()
-{
-#if defined(SOL2)
-    struct ifreq ifr;
-#if defined(INET6)
-    struct lifreq lifr;
-#endif /* defined(INET6) */
-#endif /* defined(SOL2) */
-
-#if defined(SOL2) && defined(INET6)
-    if (if6_is_up)
-	sif6down(0);
-#endif /* defined(SOL2) && defined(INET6) */
-    if (if_is_up)
-	sifdown(0);
-    if (default_route_gateway)
-	cifdefaultroute(0, default_route_gateway, default_route_gateway);
-    if (proxy_arp_addr)
-	cifproxyarp(0, proxy_arp_addr);
-#if defined(SOL2)
-    /*
-     * Make sure we ask ip what the muxid, because 'ifconfig modlist' will
-     * unlink and re-link the modules, causing the muxid to change.
-     */
-    memset(&ifr, 0, sizeof(ifr));
-    sprintf(ifr.ifr_name, "%s", ifname);
-    if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) {
-	error("SIOCGIFFLAGS: %m");
-	return;
-    }
-
-    if (ioctl(ipfd, SIOCGIFMUXID, &ifr) < 0) {
-	error("SIOCGIFMUXID: %m");
-	return;
-    }
-
-    ipmuxid = ifr.ifr_ip_muxid;
-     
-    if (ioctl(ipfd, I_PUNLINK, ipmuxid) < 0) {
-	error("Can't I_PUNLINK PPP from IP: %m");
-	return;
-    }
-#if defined(INET6)
-    /*
-     * Make sure we ask ip what the muxid, because 'ifconfig modlist' will
-     * unlink and re-link the modules, causing the muxid to change.
-     */
-    memset(&lifr, 0, sizeof(lifr));
-    sprintf(lifr.lifr_name, "%s", ifname);
-    if (ioctl(ip6fd, SIOCGLIFFLAGS, &lifr) < 0) {
-	error("SIOCGLIFFLAGS: %m");
-	return;
-    }
-
-    if (ioctl(ip6fd, SIOCGLIFMUXID, &lifr) < 0) {
-	error("SIOCGLIFMUXID: %m");
-	return;
-    }
-
-    ip6muxid = lifr.lifr_ip_muxid;
-
-    if (ioctl(ip6fd, I_PUNLINK, ip6muxid) < 0) {
-	error("Can't I_PUNLINK PPP from IP (2): %m");
-    }
-#endif /* defined(INET6) */
-#endif /* defined(SOL2) */
-}
-
-/*
- * sys_close - Clean up in a child process before execing.
- */
-void
-sys_close()
-{
-    close(ipfd);
-#if defined(INET6) && defined(SOL2)
-    close(ip6fd);
-#endif /* defined(INET6) && defined(SOL2) */
-    if (pppfd >= 0)
-	close(pppfd);
-}
-
-/*
- * sys_check_options - check the options that the user specified
- */
-int
-sys_check_options()
-{
-    return 1;
-}
-
-#if 0
-/*
- * daemon - Detach us from controlling terminal session.
- */
-int
-daemon(nochdir, noclose)
-    int nochdir, noclose;
-{
-    int pid;
-
-    if ((pid = fork()) < 0)
-	return -1;
-    if (pid != 0)
-	exit(0);		/* parent dies */
-    setsid();
-    if (!nochdir)
-	chdir("/");
-    if (!noclose) {
-	fclose(stdin);		/* don't need stdin, stdout, stderr */
-	fclose(stdout);
-	fclose(stderr);
-    }
-    return 0;
-}
-#endif
-
-/*
- * ppp_available - check whether the system has any ppp interfaces
- */
-int
-ppp_available()
-{
-    struct stat buf;
-
-    return stat(PPP_DEV_NAME, &buf) >= 0;
-}
-
-/*
- * any_compressions - see if compression is enabled or not
- *
- * In the STREAMS implementation of kernel-portion pppd,
- * the comp STREAMS module performs the ACFC, PFC, as well
- * CCP and VJ compressions. However, if the user has explicitly
- * declare to not enable them from the command line, there is
- * no point of having the comp module be pushed on the stream.
- */
-static int
-any_compressions()
-{
-    if ((!lcp_wantoptions[0].neg_accompression) &&
-	(!lcp_wantoptions[0].neg_pcompression) &&
-	(!ccp_protent.enabled_flag) &&
-	(!ipcp_wantoptions[0].neg_vj)) {
-	    return 0;
-    }
-    return 1;
-}
-
-/*
- * tty_establish_ppp - Turn the serial port into a ppp interface.
- */
-int
-tty_establish_ppp(fd)
-    int fd;
-{
-    int i;
-
-    /* Pop any existing modules off the tty stream. */
-    for (i = 0;; ++i)
-	if (ioctl(fd, I_LOOK, tty_modules[i]) < 0
-	    || strcmp(tty_modules[i], "ptem") == 0
-	    || ioctl(fd, I_POP, 0) < 0)
-	    break;
-    tty_nmodules = i;
-
-    /* Push the async hdlc module and the compressor module. */
-    tty_npushed = 0;
-
-    if(!sync_serial) {
-        if (ioctl(fd, I_PUSH, AHDLC_MOD_NAME) < 0) {
-            error("Couldn't push PPP Async HDLC module: %m");
-	    return -1;
-        }
-        ++tty_npushed;
-    }
-    if (kdebugflag & 4) {
-	i = PPPDBG_LOG + PPPDBG_AHDLC;
-	strioctl(pppfd, PPPIO_DEBUG, &i, sizeof(int), 0);
-    }
-    /*
-     * There's no need to push comp module if we don't intend
-     * to compress anything
-     */
-    if (any_compressions()) { 
-        if (ioctl(fd, I_PUSH, COMP_MOD_NAME) < 0)
-	    error("Couldn't push PPP compression module: %m");
-	else
-	    ++tty_npushed;
-    }
-
-    if (kdebugflag & 2) {
-	i = PPPDBG_LOG; 
-	if (any_compressions())
-	    i += PPPDBG_COMP;
-	strioctl(pppfd, PPPIO_DEBUG, &i, sizeof(int), 0);
-    }
-
-    /* Link the serial port under the PPP multiplexor. */
-    if ((fdmuxid = ioctl(pppfd, I_LINK, fd)) < 0) {
-	error("Can't link tty to PPP mux: %m");
-	return -1;
-    }
-
-    return pppfd;
-}
-
-/*
- * tty_disestablish_ppp - Restore the serial port to normal operation.
- * It attempts to reconstruct the stream with the previously popped
- * modules.  This shouldn't call die() because it's called from die().
- */
-void
-tty_disestablish_ppp(fd)
-    int fd;
-{
-    int i;
-
-    if (fdmuxid >= 0) {
-	if (ioctl(pppfd, I_UNLINK, fdmuxid) < 0) {
-	    if (!hungup)
-		error("Can't unlink tty from PPP mux: %m");
-	}
-	fdmuxid = -1;
-
-	if (!hungup) {
-	    while (tty_npushed > 0 && ioctl(fd, I_POP, 0) >= 0)
-		--tty_npushed;
-	    for (i = tty_nmodules - 1; i >= 0; --i)
-		if (ioctl(fd, I_PUSH, tty_modules[i]) < 0)
-		    error("Couldn't restore tty module %s: %m",
-			   tty_modules[i]);
-	}
-	if (hungup && default_device && tty_sid > 0) {
-	    /*
-	     * If we have received a hangup, we need to send a SIGHUP
-	     * to the terminal's controlling process.  The reason is
-	     * that the original stream head for the terminal hasn't
-	     * seen the M_HANGUP message (it went up through the ppp
-	     * driver to the stream head for our fd to /dev/ppp).
-	     */
-	    kill(tty_sid, SIGHUP);
-	}
-    }
-}
-
-/*
- * Check whether the link seems not to be 8-bit clean.
- */
-void
-clean_check()
-{
-    int x;
-    char *s;
-
-    if (strioctl(pppfd, PPPIO_GCLEAN, &x, 0, sizeof(x)) < 0)
-	return;
-    s = NULL;
-    switch (~x) {
-    case RCV_B7_0:
-	s = "bit 7 set to 1";
-	break;
-    case RCV_B7_1:
-	s = "bit 7 set to 0";
-	break;
-    case RCV_EVNP:
-	s = "odd parity";
-	break;
-    case RCV_ODDP:
-	s = "even parity";
-	break;
-    }
-    if (s != NULL) {
-	warn("Serial link is not 8-bit clean:");
-	warn("All received characters had %s", s);
-    }
-}
-
-/*
- * List of valid speeds.
- */
-struct speed {
-    int speed_int, speed_val;
-} speeds[] = {
-#ifdef B50
-    { 50, B50 },
-#endif
-#ifdef B75
-    { 75, B75 },
-#endif
-#ifdef B110
-    { 110, B110 },
-#endif
-#ifdef B134
-    { 134, B134 },
-#endif
-#ifdef B150
-    { 150, B150 },
-#endif
-#ifdef B200
-    { 200, B200 },
-#endif
-#ifdef B300
-    { 300, B300 },
-#endif
-#ifdef B600
-    { 600, B600 },
-#endif
-#ifdef B1200
-    { 1200, B1200 },
-#endif
-#ifdef B1800
-    { 1800, B1800 },
-#endif
-#ifdef B2000
-    { 2000, B2000 },
-#endif
-#ifdef B2400
-    { 2400, B2400 },
-#endif
-#ifdef B3600
-    { 3600, B3600 },
-#endif
-#ifdef B4800
-    { 4800, B4800 },
-#endif
-#ifdef B7200
-    { 7200, B7200 },
-#endif
-#ifdef B9600
-    { 9600, B9600 },
-#endif
-#ifdef B19200
-    { 19200, B19200 },
-#endif
-#ifdef B38400
-    { 38400, B38400 },
-#endif
-#ifdef EXTA
-    { 19200, EXTA },
-#endif
-#ifdef EXTB
-    { 38400, EXTB },
-#endif
-#ifdef B57600
-    { 57600, B57600 },
-#endif
-#ifdef B76800
-    { 76800, B76800 },
-#endif
-#ifdef B115200
-    { 115200, B115200 },
-#endif
-#ifdef B153600
-    { 153600, B153600 },
-#endif
-#ifdef B230400
-    { 230400, B230400 },
-#endif
-#ifdef B307200
-    { 307200, B307200 },
-#endif
-#ifdef B460800
-    { 460800, B460800 },
-#endif
-    { 0, 0 }
-};
-
-/*
- * Translate from bits/second to a speed_t.
- */
-static int
-translate_speed(bps)
-    int bps;
-{
-    struct speed *speedp;
-
-    if (bps == 0)
-	return 0;
-    for (speedp = speeds; speedp->speed_int; speedp++)
-	if (bps == speedp->speed_int)
-	    return speedp->speed_val;
-    warn("speed %d not supported", bps);
-    return 0;
-}
-
-/*
- * Translate from a speed_t to bits/second.
- */
-static int
-baud_rate_of(speed)
-    int speed;
-{
-    struct speed *speedp;
-
-    if (speed == 0)
-	return 0;
-    for (speedp = speeds; speedp->speed_int; speedp++)
-	if (speed == speedp->speed_val)
-	    return speedp->speed_int;
-    return 0;
-}
-
-/*
- * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
- * at the requested speed, etc.  If `local' is true, set CLOCAL
- * regardless of whether the modem option was specified.
- */
-void
-set_up_tty(fd, local)
-    int fd, local;
-{
-    int speed;
-    struct termios tios;
-#if !defined (CRTSCTS)
-    struct termiox tiox;
-#endif
-
-    if (!sync_serial && tcgetattr(fd, &tios) < 0)
-	fatal("tcgetattr: %m");
-
-#ifndef CRTSCTS
-    termiox_ok = 1;
-    if (!sync_serial && ioctl (fd, TCGETX, &tiox) < 0) {
-	termiox_ok = 0;
-	if (errno != ENOTTY)
-	    error("TCGETX: %m");
-    }
-#endif
-
-    if (!restore_term) {
-	inittermios = tios;
-#ifndef CRTSCTS
-	inittermiox = tiox;
-#endif
-	if (!sync_serial)
-	    ioctl(fd, TIOCGWINSZ, &wsinfo);
-    }
-
-    tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
-#ifdef CRTSCTS
-    if (crtscts > 0)
-	tios.c_cflag |= CRTSCTS;
-    else if (crtscts < 0)
-	tios.c_cflag &= ~CRTSCTS;
-#else
-    if (crtscts != 0 && !termiox_ok) {
-	error("Can't set RTS/CTS flow control");
-    } else if (crtscts > 0) {
-	tiox.x_hflag |= RTSXOFF|CTSXON;
-    } else if (crtscts < 0) {
-	tiox.x_hflag &= ~(RTSXOFF|CTSXON);
-    }
-#endif
-
-    tios.c_cflag |= CS8 | CREAD | HUPCL;
-    if (local || !modem)
-	tios.c_cflag |= CLOCAL;
-    tios.c_iflag = IGNBRK | IGNPAR;
-    tios.c_oflag = 0;
-    tios.c_lflag = 0;
-    tios.c_cc[VMIN] = 1;
-    tios.c_cc[VTIME] = 0;
-
-    if (crtscts == -2) {
-	tios.c_iflag |= IXON | IXOFF;
-	tios.c_cc[VSTOP] = 0x13;	/* DC3 = XOFF = ^S */
-	tios.c_cc[VSTART] = 0x11;	/* DC1 = XON  = ^Q */
-    }
-
-    speed = translate_speed(inspeed);
-    if (speed) {
-	cfsetospeed(&tios, speed);
-	cfsetispeed(&tios, speed);
-    } else {
-	speed = cfgetospeed(&tios);
-	/*
-	 * We can't proceed if the serial port speed is 0,
-	 * since that implies that the serial port is disabled.
-	 */
-	if ((speed == B0) && !sync_serial)
-	    fatal("Baud rate for %s is 0; need explicit baud rate", devnam);
-    }
-
-    if (!sync_serial && tcsetattr(fd, TCSAFLUSH, &tios) < 0)
-	fatal("tcsetattr: %m");
-
-#ifndef CRTSCTS
-    if (!sync_serial && termiox_ok && ioctl (fd, TCSETXF, &tiox) < 0){
-	error("TCSETXF: %m");
-    }
-#endif
-
-    baud_rate = inspeed = baud_rate_of(speed);
-    if (!sync_serial)
-	restore_term = 1;
-}
-
-/*
- * restore_tty - restore the terminal to the saved settings.
- */
-void
-restore_tty(fd)
-    int fd;
-{
-    if (restore_term) {
-	if (!default_device) {
-	    /*
-	     * Turn off echoing, because otherwise we can get into
-	     * a loop with the tty and the modem echoing to each other.
-	     * We presume we are the sole user of this tty device, so
-	     * when we close it, it will revert to its defaults anyway.
-	     */
-	    inittermios.c_lflag &= ~(ECHO | ECHONL);
-	}
-	if (!sync_serial && tcsetattr(fd, TCSAFLUSH, &inittermios) < 0)
-	    if (!hungup && errno != ENXIO)
-		warn("tcsetattr: %m");
-#ifndef CRTSCTS
-	if (!sync_serial && ioctl (fd, TCSETXF, &inittermiox) < 0){
-	    if (!hungup && errno != ENXIO)
-		error("TCSETXF: %m");
-	}
-#endif
-	if (!sync_serial)
-	    ioctl(fd, TIOCSWINSZ, &wsinfo);
-	restore_term = 0;
-    }
-}
-
-/*
- * setdtr - control the DTR line on the serial port.
- * This is called from die(), so it shouldn't call die().
- */
-void
-setdtr(fd, on)
-int fd, on;
-{
-    int modembits = TIOCM_DTR;
-
-    ioctl(fd, (on? TIOCMBIS: TIOCMBIC), &modembits);
-}
-
-/*
- * open_loopback - open the device we use for getting packets
- * in demand mode.  Under Solaris 2, we use our existing fd
- * to the ppp driver.
- */
-int
-open_ppp_loopback()
-{
-    return pppfd;
-}
-
-/*
- * output - Output PPP packet.
- */
-void
-output(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    struct strbuf data;
-    int retries;
-    struct pollfd pfd;
-
-    if (debug)
-	dbglog("sent %P", p, len);
-
-    data.len = len;
-    data.buf = (caddr_t) p;
-    retries = 4;
-    while (putmsg(pppfd, NULL, &data, 0) < 0) {
-	if (--retries < 0 || (errno != EWOULDBLOCK && errno != EAGAIN)) {
-	    if (errno != ENXIO)
-		error("Couldn't send packet: %m");
-	    break;
-	}
-	pfd.fd = pppfd;
-	pfd.events = POLLOUT;
-	poll(&pfd, 1, 250);	/* wait for up to 0.25 seconds */
-    }
-}
-
-
-/*
- * wait_input - wait until there is data available,
- * for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-void
-wait_input(timo)
-    struct timeval *timo;
-{
-    int t;
-
-    t = timo == NULL? -1: timo->tv_sec * 1000 + timo->tv_usec / 1000;
-    if (poll(pollfds, n_pollfds, t) < 0 && errno != EINTR)
-	fatal("poll: %m");
-}
-
-/*
- * add_fd - add an fd to the set that wait_input waits for.
- */
-void add_fd(fd)
-    int fd;
-{
-    int n;
-
-    for (n = 0; n < n_pollfds; ++n)
-	if (pollfds[n].fd == fd)
-	    return;
-    if (n_pollfds < MAX_POLLFDS) {
-	pollfds[n_pollfds].fd = fd;
-	pollfds[n_pollfds].events = POLLIN | POLLPRI | POLLHUP;
-	++n_pollfds;
-    } else
-	error("Too many inputs!");
-}
-
-/*
- * remove_fd - remove an fd from the set that wait_input waits for.
- */
-void remove_fd(fd)
-    int fd;
-{
-    int n;
-
-    for (n = 0; n < n_pollfds; ++n) {
-	if (pollfds[n].fd == fd) {
-	    while (++n < n_pollfds)
-		pollfds[n-1] = pollfds[n];
-	    --n_pollfds;
-	    break;
-	}
-    }
-}
-
-#if 0
-/*
- * wait_loop_output - wait until there is data available on the
- * loopback, for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-void
-wait_loop_output(timo)
-    struct timeval *timo;
-{
-    wait_input(timo);
-}
-
-/*
- * wait_time - wait for a given length of time or until a
- * signal is received.
- */
-void
-wait_time(timo)
-    struct timeval *timo;
-{
-    int n;
-
-    n = select(0, NULL, NULL, NULL, timo);
-    if (n < 0 && errno != EINTR)
-	fatal("select: %m");
-}
-#endif
-
-
-/*
- * read_packet - get a PPP packet from the serial device.
- */
-int
-read_packet(buf)
-    u_char *buf;
-{
-    struct strbuf ctrl, data;
-    int flags, len;
-    unsigned char ctrlbuf[sizeof(union DL_primitives) + 64];
-
-    for (;;) {
-	data.maxlen = PPP_MRU + PPP_HDRLEN;
-	data.buf = (caddr_t) buf;
-	ctrl.maxlen = sizeof(ctrlbuf);
-	ctrl.buf = (caddr_t) ctrlbuf;
-	flags = 0;
-	len = getmsg(pppfd, &ctrl, &data, &flags);
-	if (len < 0) {
-	    if (errno == EAGAIN || errno == EINTR)
-		return -1;
-	    fatal("Error reading packet: %m");
-	}
-
-	if (ctrl.len <= 0)
-	    return data.len;
-
-	/*
-	 * Got a M_PROTO or M_PCPROTO message.  Interpret it
-	 * as a DLPI primitive??
-	 */
-	if (debug)
-	    dbglog("got dlpi prim 0x%x, len=%d",
-		   ((union DL_primitives *)ctrlbuf)->dl_primitive, ctrl.len);
-
-    }
-}
-
-/*
- * get_loop_output - get outgoing packets from the ppp device,
- * and detect when we want to bring the real link up.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- */
-int
-get_loop_output()
-{
-    int len;
-    int rv = 0;
-
-    while ((len = read_packet(inpacket_buf)) > 0) {
-	if (loop_frame(inpacket_buf, len))
-	    rv = 1;
-    }
-    return rv;
-}
-
-/*
- * netif_set_mtu - set the MTU on the PPP network interface.
- */
-void
-netif_set_mtu(unit, mtu)
-    int unit, mtu;
-{
-    struct ifreq ifr;
-#if defined(INET6) && defined(SOL2)
-    struct lifreq lifr;
-    int	fd;
-#endif /* defined(INET6) && defined(SOL2) */
-
-    memset(&ifr, 0, sizeof(ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    ifr.ifr_metric = link_mtu;
-    if (ioctl(ipfd, SIOCSIFMTU, &ifr) < 0) {
-	error("Couldn't set IP MTU (%s): %m", ifr.ifr_name);
-    }
-
-#if defined(INET6) && defined(SOL2) 
-    fd = socket(AF_INET6, SOCK_DGRAM, 0);
-    if (fd < 0)
-	error("Couldn't open IPv6 socket: %m");
-
-    memset(&lifr, 0, sizeof(lifr));
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-    lifr.lifr_mtu = link_mtu;
-    if (ioctl(fd, SIOCSLIFMTU, &lifr) < 0) {
-	close(fd);
-	error("Couldn't set IPv6 MTU (%s): %m", ifr.ifr_name);
-    }
-    close(fd);
-#endif /* defined(INET6) && defined(SOL2) */
-}
-
-/*
- * tty_send_config - configure the transmit characteristics of
- * the ppp interface.
- */
-void
-tty_send_config(mtu, asyncmap, pcomp, accomp)
-    int mtu;
-    u_int32_t asyncmap;
-    int pcomp, accomp;
-{
-    int cf[2];
-
-    link_mtu = mtu;
-    if (strioctl(pppfd, PPPIO_MTU, &mtu, sizeof(mtu), 0) < 0) {
-	if (hungup && errno == ENXIO)
-	    return;
-	error("Couldn't set MTU: %m");
-    }
-    if (fdmuxid >= 0) {
-	if (!sync_serial) {
-	    if (strioctl(pppfd, PPPIO_XACCM, &asyncmap, sizeof(asyncmap), 0) < 0) {
-		error("Couldn't set transmit ACCM: %m");
-	    }
-	}
-	cf[0] = (pcomp? COMP_PROT: 0) + (accomp? COMP_AC: 0);
-	cf[1] = COMP_PROT | COMP_AC;
-	if (any_compressions() &&
-	    strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	    error("Couldn't set prot/AC compression: %m");
-	}
-    }
-}
-
-/*
- * ppp_set_xaccm - set the extended transmit ACCM for the interface.
- */
-void
-tty_set_xaccm(accm)
-    ext_accm accm;
-{
-    if (sync_serial)
-	return;
-
-    if (fdmuxid >= 0
-	&& strioctl(pppfd, PPPIO_XACCM, accm, sizeof(ext_accm), 0) < 0) {
-	if (!hungup || errno != ENXIO)
-	    warn("Couldn't set extended ACCM: %m");
-    }
-}
-
-/*
- * ppp_recv_config - configure the receive-side characteristics of
- * the ppp interface.
- */
-void
-tty_recv_config(mru, asyncmap, pcomp, accomp)
-    int mru;
-    u_int32_t asyncmap;
-    int pcomp, accomp;
-{
-    int cf[2];
-
-    link_mru = mru;
-    if (strioctl(pppfd, PPPIO_MRU, &mru, sizeof(mru), 0) < 0) {
-	if (hungup && errno == ENXIO)
-	    return;
-	error("Couldn't set MRU: %m");
-    }
-    if (fdmuxid >= 0) {
-	if (!sync_serial) {
-	    if (strioctl(pppfd, PPPIO_RACCM, &asyncmap, sizeof(asyncmap), 0) < 0) {
-		error("Couldn't set receive ACCM: %m");
-	    }
-	}
-	cf[0] = (pcomp? DECOMP_PROT: 0) + (accomp? DECOMP_AC: 0);
-	cf[1] = DECOMP_PROT | DECOMP_AC;
-	if (any_compressions() &&
-	    strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	    error("Couldn't set prot/AC decompression: %m");
-	}
-    }
-}
-
-/*
- * ccp_test - ask kernel whether a given compression method
- * is acceptable for use.
- */
-int
-ccp_test(unit, opt_ptr, opt_len, for_transmit)
-    int unit, opt_len, for_transmit;
-    u_char *opt_ptr;
-{
-    if (strioctl(pppfd, (for_transmit? PPPIO_XCOMP: PPPIO_RCOMP),
-		 opt_ptr, opt_len, 0) >= 0)
-	return 1;
-    return (errno == ENOSR)? 0: -1;
-}
-
-/*
- * ccp_flags_set - inform kernel about the current state of CCP.
- */
-void
-ccp_flags_set(unit, isopen, isup)
-    int unit, isopen, isup;
-{
-    int cf[2];
-
-    cf[0] = (isopen? CCP_ISOPEN: 0) + (isup? CCP_ISUP: 0);
-    cf[1] = CCP_ISOPEN | CCP_ISUP | CCP_ERROR | CCP_FATALERROR;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	if (!hungup || errno != ENXIO)
-	    error("Couldn't set kernel CCP state: %m");
-    }
-}
-
-/*
- * get_idle_time - return how long the link has been idle.
- */
-int
-get_idle_time(u, ip)
-    int u;
-    struct ppp_idle *ip;
-{
-    return strioctl(pppfd, PPPIO_GIDLE, ip, 0, sizeof(struct ppp_idle)) >= 0;
-}
-
-/*
- * get_ppp_stats - return statistics for the link.
- */
-int
-get_ppp_stats(u, stats)
-    int u;
-    struct pppd_stats *stats;
-{
-    struct ppp_stats s;
-
-    if (!sync_serial && 
-	strioctl(pppfd, PPPIO_GETSTAT, &s, 0, sizeof(s)) < 0) {
-	error("Couldn't get link statistics: %m");
-	return 0;
-    }
-    stats->bytes_in = s.p.ppp_ibytes;
-    stats->bytes_out = s.p.ppp_obytes;
-    return 1;
-}
-
-#if 0
-/*
- * set_filters - transfer the pass and active filters to the kernel.
- */
-int
-set_filters(pass, active)
-    struct bpf_program *pass, *active;
-{
-    int ret = 1;
-
-    if (pass->bf_len > 0) {
-	if (strioctl(pppfd, PPPIO_PASSFILT, pass,
-		     sizeof(struct bpf_program), 0) < 0) {
-	    error("Couldn't set pass-filter in kernel: %m");
-	    ret = 0;
-	}
-    }
-    if (active->bf_len > 0) {
-	if (strioctl(pppfd, PPPIO_ACTIVEFILT, active,
-		     sizeof(struct bpf_program), 0) < 0) {
-	    error("Couldn't set active-filter in kernel: %m");
-	    ret = 0;
-	}
-    }
-    return ret;
-}
-#endif
-
-/*
- * ccp_fatal_error - returns 1 if decompression was disabled as a
- * result of an error detected after decompression of a packet,
- * 0 otherwise.  This is necessary because of patent nonsense.
- */
-int
-ccp_fatal_error(unit)
-    int unit;
-{
-    int cf[2];
-
-    cf[0] = cf[1] = 0;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	if (errno != ENXIO && errno != EINVAL)
-	    error("Couldn't get compression flags: %m");
-	return 0;
-    }
-    return cf[0] & CCP_FATALERROR;
-}
-
-/*
- * sifvjcomp - config tcp header compression
- */
-int
-sifvjcomp(u, vjcomp, xcidcomp, xmaxcid)
-    int u, vjcomp, xcidcomp, xmaxcid;
-{
-    int cf[2];
-    char maxcid[2];
-
-    if (vjcomp) {
-	maxcid[0] = xcidcomp;
-	maxcid[1] = 15;		/* XXX should be rmaxcid */
-	if (strioctl(pppfd, PPPIO_VJINIT, maxcid, sizeof(maxcid), 0) < 0) {
-	    error("Couldn't initialize VJ compression: %m");
-	}
-    }
-
-    cf[0] = (vjcomp? COMP_VJC + DECOMP_VJC: 0)	/* XXX this is wrong */
-	+ (xcidcomp? COMP_VJCCID + DECOMP_VJCCID: 0);
-    cf[1] = COMP_VJC + DECOMP_VJC + COMP_VJCCID + DECOMP_VJCCID;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	if (vjcomp)
-	    error("Couldn't enable VJ compression: %m");
-    }
-
-    return 1;
-}
-
-/*
- * sifup - Config the interface up and enable IP packets to pass.
- */
-int
-sifup(u)
-    int u;
-{
-    struct ifreq ifr;
-
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) {
-	error("Couldn't mark interface up (get): %m");
-	return 0;
-    }
-    ifr.ifr_flags |= IFF_UP;
-    if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) {
-	error("Couldn't mark interface up (set): %m");
-	return 0;
-    }
-    if_is_up = 1;
-    return 1;
-}
-
-/*
- * sifdown - Config the interface down and disable IP.
- */
-int
-sifdown(u)
-    int u;
-{
-    struct ifreq ifr;
-
-    if (ipmuxid < 0)
-	return 1;
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) {
-	error("Couldn't mark interface down (get): %m");
-	return 0;
-    }
-    ifr.ifr_flags &= ~IFF_UP;
-    if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) {
-	error("Couldn't mark interface down (set): %m");
-	return 0;
-    }
-    if_is_up = 0;
-    return 1;
-}
-
-/*
- * sifnpmode - Set the mode for handling packets for a given NP.
- */
-int
-sifnpmode(u, proto, mode)
-    int u;
-    int proto;
-    enum NPmode mode;
-{
-    int npi[2];
-
-    npi[0] = proto;
-    npi[1] = (int) mode;
-    if (strioctl(pppfd, PPPIO_NPMODE, &npi, 2 * sizeof(int), 0) < 0) {
-	error("ioctl(set NP %d mode to %d): %m", proto, mode);
-	return 0;
-    }
-    return 1;
-}
-
-#if defined(SOL2) && defined(INET6)
-/*
- * sif6up - Config the IPv6 interface up and enable IPv6 packets to pass.
- */
-int
-sif6up(u)
-    int u;
-{
-    struct lifreq lifr;
-    int fd;
-
-    fd = socket(AF_INET6, SOCK_DGRAM, 0);
-    if (fd < 0) {
-	return 0;
-    }
-
-    memset(&lifr, 0, sizeof(lifr));
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-    if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) {
-	close(fd);
-	return 0;
-    }
-
-    lifr.lifr_flags |= IFF_UP;
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-    if (ioctl(fd, SIOCSLIFFLAGS, &lifr) < 0) {
-	close(fd);
-	return 0;
-    }
-
-    if6_is_up = 1;
-    close(fd);
-    return 1;
-}
-
-/*
- * sifdown - Config the IPv6 interface down and disable IPv6.
- */
-int
-sif6down(u)
-    int u;
-{
-    struct lifreq lifr;
-    int fd;
-
-    fd = socket(AF_INET6, SOCK_DGRAM, 0);
-    if (fd < 0)
-	return 0;
-
-    memset(&lifr, 0, sizeof(lifr));
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-    if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) {
-	close(fd);
-	return 0;
-    }
-
-    lifr.lifr_flags &= ~IFF_UP;
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-    if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) {
-	close(fd);
-	return 0;
-    }
-
-    if6_is_up = 0;
-    close(fd);
-    return 1;
-}
-
-/*
- * sif6addr - Config the interface with an IPv6 link-local address
- */
-int
-sif6addr(u, o, h)
-    int u;
-    eui64_t o, h;
-{
-    struct lifreq lifr;
-    struct sockaddr_storage laddr;
-    struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)&laddr;
-    int fd;
-
-    fd = socket(AF_INET6, SOCK_DGRAM, 0);
-    if (fd < 0)
-	return 0;
-
-    memset(&lifr, 0, sizeof(lifr));
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-
-    /*
-     * Do this because /dev/ppp responds to DL_PHYS_ADDR_REQ with
-     * zero values, hence the interface token came to be zero too,
-     * and without this, in.ndpd will complain
-     */
-    IN6_LLTOKEN_FROM_EUI64(lifr, sin6, o);
-    if (ioctl(fd, SIOCSLIFTOKEN, &lifr) < 0) {
-	close(fd);
-	return 0;
-    }
-
-    /*
-     * Set the interface address and destination address
-     */
-    IN6_LLADDR_FROM_EUI64(lifr, sin6, o);
-    if (ioctl(fd, SIOCSLIFADDR, &lifr) < 0) {
-	close(fd);
-	return 0;
-    }
-
-    memset(&lifr, 0, sizeof(lifr));
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-    IN6_LLADDR_FROM_EUI64(lifr, sin6, h);
-    if (ioctl(fd, SIOCSLIFDSTADDR, &lifr) < 0) {
-	close(fd);
-	return 0;
-    }
-
-    return 1;
-}
-
-/*
- * cif6addr - Remove the IPv6 address from interface
- */
-int
-cif6addr(u, o, h)
-    int u;
-    eui64_t o, h;
-{
-    return 1;
-}
-
-#endif /* defined(SOL2) && defined(INET6) */
-
-
-#define INET_ADDR(x)	(((struct sockaddr_in *) &(x))->sin_addr.s_addr)
-
-/*
- * sifaddr - Config the interface IP addresses and netmask.
- */
-int
-sifaddr(u, o, h, m)
-    int u;
-    u_int32_t o, h, m;
-{
-    struct ifreq ifr;
-    int ret = 1;
-
-    memset(&ifr, 0, sizeof(ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    ifr.ifr_addr.sa_family = AF_INET;
-    INET_ADDR(ifr.ifr_addr) = m;
-    if (ioctl(ipfd, SIOCSIFNETMASK, &ifr) < 0) {
-	error("Couldn't set IP netmask: %m");
-	ret = 0;
-    }
-    ifr.ifr_addr.sa_family = AF_INET;
-    INET_ADDR(ifr.ifr_addr) = o;
-    if (ioctl(ipfd, SIOCSIFADDR, &ifr) < 0) {
-	error("Couldn't set local IP address: %m");
-	ret = 0;
-    }
-
-    /*
-     * On some systems, we have to explicitly set the point-to-point
-     * flag bit before we can set a destination address.
-     */
-    if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) >= 0
-	&& (ifr.ifr_flags & IFF_POINTOPOINT) == 0) {
-	ifr.ifr_flags |= IFF_POINTOPOINT;
-	if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) {
-	    error("Couldn't mark interface pt-to-pt: %m");
-	    ret = 0;
-	}
-    }
-    ifr.ifr_dstaddr.sa_family = AF_INET;
-    INET_ADDR(ifr.ifr_dstaddr) = h;
-    if (ioctl(ipfd, SIOCSIFDSTADDR, &ifr) < 0) {
-	error("Couldn't set remote IP address: %m");
-	ret = 0;
-    }
-#if 0	/* now done in ppp_send_config */
-    ifr.ifr_metric = link_mtu;
-    if (ioctl(ipfd, SIOCSIFMTU, &ifr) < 0) {
-	error("Couldn't set IP MTU: %m");
-    }
-#endif
-
-    remote_addr = h;
-    return ret;
-}
-
-/*
- * cifaddr - Clear the interface IP addresses, and delete routes
- * through the interface if possible.
- */
-int
-cifaddr(u, o, h)
-    int u;
-    u_int32_t o, h;
-{
-#if defined(__USLC__)		/* was: #if 0 */
-    cifroute(unit, ouraddr, hisaddr);
-    if (ipmuxid >= 0) {
-	notice("Removing ppp interface unit");
-	if (ioctl(ipfd, I_UNLINK, ipmuxid) < 0) {
-	    error("Can't remove ppp interface unit: %m");
-	    return 0;
-	}
-	ipmuxid = -1;
-    }
-#endif
-    remote_addr = 0;
-    return 1;
-}
-
-/*
- * sifdefaultroute - assign a default route through the address given.
- */
-int
-sifdefaultroute(u, l, g)
-    int u;
-    u_int32_t l, g;
-{
-    struct rtentry rt;
-
-#if defined(__USLC__)
-    g = l;			/* use the local address as gateway */
-#endif
-    memset(&rt, 0, sizeof(rt));
-    rt.rt_dst.sa_family = AF_INET;
-    INET_ADDR(rt.rt_dst) = 0;
-    rt.rt_gateway.sa_family = AF_INET;
-    INET_ADDR(rt.rt_gateway) = g;
-    rt.rt_flags = RTF_GATEWAY;
-
-    if (ioctl(ipfd, SIOCADDRT, &rt) < 0) {
-	error("Can't add default route: %m");
-	return 0;
-    }
-
-    default_route_gateway = g;
-    return 1;
-}
-
-/*
- * cifdefaultroute - delete a default route through the address given.
- */
-int
-cifdefaultroute(u, l, g)
-    int u;
-    u_int32_t l, g;
-{
-    struct rtentry rt;
-
-#if defined(__USLC__)
-    g = l;			/* use the local address as gateway */
-#endif
-    memset(&rt, 0, sizeof(rt));
-    rt.rt_dst.sa_family = AF_INET;
-    INET_ADDR(rt.rt_dst) = 0;
-    rt.rt_gateway.sa_family = AF_INET;
-    INET_ADDR(rt.rt_gateway) = g;
-    rt.rt_flags = RTF_GATEWAY;
-
-    if (ioctl(ipfd, SIOCDELRT, &rt) < 0) {
-	error("Can't delete default route: %m");
-	return 0;
-    }
-
-    default_route_gateway = 0;
-    return 1;
-}
-
-/*
- * sifproxyarp - Make a proxy ARP entry for the peer.
- */
-int
-sifproxyarp(unit, hisaddr)
-    int unit;
-    u_int32_t hisaddr;
-{
-    struct arpreq arpreq;
-
-    memset(&arpreq, 0, sizeof(arpreq));
-    if (!get_ether_addr(hisaddr, &arpreq.arp_ha))
-	return 0;
-
-    arpreq.arp_pa.sa_family = AF_INET;
-    INET_ADDR(arpreq.arp_pa) = hisaddr;
-    arpreq.arp_flags = ATF_PERM | ATF_PUBL;
-    if (ioctl(ipfd, SIOCSARP, (caddr_t) &arpreq) < 0) {
-	error("Couldn't set proxy ARP entry: %m");
-	return 0;
-    }
-
-    proxy_arp_addr = hisaddr;
-    return 1;
-}
-
-/*
- * cifproxyarp - Delete the proxy ARP entry for the peer.
- */
-int
-cifproxyarp(unit, hisaddr)
-    int unit;
-    u_int32_t hisaddr;
-{
-    struct arpreq arpreq;
-
-    memset(&arpreq, 0, sizeof(arpreq));
-    arpreq.arp_pa.sa_family = AF_INET;
-    INET_ADDR(arpreq.arp_pa) = hisaddr;
-    if (ioctl(ipfd, SIOCDARP, (caddr_t)&arpreq) < 0) {
-	error("Couldn't delete proxy ARP entry: %m");
-	return 0;
-    }
-
-    proxy_arp_addr = 0;
-    return 1;
-}
-
-/*
- * get_ether_addr - get the hardware address of an interface on the
- * the same subnet as ipaddr.
- */
-#define MAX_IFS		32
-
-static int
-get_ether_addr(ipaddr, hwaddr)
-    u_int32_t ipaddr;
-    struct sockaddr *hwaddr;
-{
-    struct ifreq *ifr, *ifend, ifreq;
-    int nif;
-    struct ifconf ifc;
-    u_int32_t ina, mask;
-
-    /*
-     * Scan through the system's network interfaces.
-     */
-#ifdef SIOCGIFNUM
-    if (ioctl(ipfd, SIOCGIFNUM, &nif) < 0)
-#endif
-	nif = MAX_IFS;
-    ifc.ifc_len = nif * sizeof(struct ifreq);
-    ifc.ifc_buf = (caddr_t) malloc(ifc.ifc_len);
-    if (ifc.ifc_buf == 0)
-	return 0;
-    if (ioctl(ipfd, SIOCGIFCONF, &ifc) < 0) {
-	warn("Couldn't get system interface list: %m");
-	free(ifc.ifc_buf);
-	return 0;
-    }
-    ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
-    for (ifr = ifc.ifc_req; ifr < ifend; ++ifr) {
-	if (ifr->ifr_addr.sa_family != AF_INET)
-	    continue;
-	/*
-	 * Check that the interface is up, and not point-to-point or loopback.
-	 */
-	strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-	if (ioctl(ipfd, SIOCGIFFLAGS, &ifreq) < 0)
-	    continue;
-	if ((ifreq.ifr_flags &
-	     (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP))
-	    != (IFF_UP|IFF_BROADCAST))
-	    continue;
-	/*
-	 * Get its netmask and check that it's on the right subnet.
-	 */
-	if (ioctl(ipfd, SIOCGIFNETMASK, &ifreq) < 0)
-	    continue;
-	ina = INET_ADDR(ifr->ifr_addr);
-	mask = INET_ADDR(ifreq.ifr_addr);
-	if ((ipaddr & mask) == (ina & mask))
-	    break;
-    }
-
-    if (ifr >= ifend) {
-	warn("No suitable interface found for proxy ARP");
-	free(ifc.ifc_buf);
-	return 0;
-    }
-
-    info("found interface %s for proxy ARP", ifr->ifr_name);
-    if (!get_hw_addr(ifr->ifr_name, ina, hwaddr)) {
-	error("Couldn't get hardware address for %s", ifr->ifr_name);
-	free(ifc.ifc_buf);
-	return 0;
-    }
-
-    free(ifc.ifc_buf);
-    return 1;
-}
-
-/*
- * get_hw_addr_dlpi - obtain the hardware address using DLPI
- */
-static int
-get_hw_addr_dlpi(name, hwaddr)
-    char *name;
-    struct sockaddr *hwaddr;
-{
-    char *p, *q;
-    int unit, iffd, adrlen;
-    unsigned char *adrp;
-    char ifdev[24];
-    struct {
-	union DL_primitives prim;
-	char space[64];
-    } reply;
-
-    /*
-     * We have to open the device and ask it for its hardware address.
-     * First split apart the device name and unit.
-     */
-    slprintf(ifdev, sizeof(ifdev), "/dev/%s", name);
-    for (q = ifdev + strlen(ifdev); --q >= ifdev; )
-	if (!isdigit(*q))
-	    break;
-    unit = atoi(q+1);
-    q[1] = 0;
-
-    /*
-     * Open the device and do a DLPI attach and phys_addr_req.
-     */
-    iffd = open(ifdev, O_RDWR);
-    if (iffd < 0) {
-	error("Can't open %s: %m", ifdev);
-	return 0;
-    }
-    if (dlpi_attach(iffd, unit) < 0
-	|| dlpi_get_reply(iffd, &reply.prim, DL_OK_ACK, sizeof(reply)) < 0
-	|| dlpi_info_req(iffd) < 0
-	|| dlpi_get_reply(iffd, &reply.prim, DL_INFO_ACK, sizeof(reply)) < 0) {
-	close(iffd);
-	return 0;
-    }
-
-    adrlen = reply.prim.info_ack.dl_addr_length;
-    adrp = (unsigned char *)&reply + reply.prim.info_ack.dl_addr_offset;
-
-#if DL_CURRENT_VERSION >= 2
-    if (reply.prim.info_ack.dl_sap_length < 0)
-	adrlen += reply.prim.info_ack.dl_sap_length;
-    else
-	adrp += reply.prim.info_ack.dl_sap_length;
-#endif
-
-    hwaddr->sa_family = AF_UNSPEC;
-    memcpy(hwaddr->sa_data, adrp, adrlen);
-
-    return 1;
-}
-/*
- * get_hw_addr - obtain the hardware address for a named interface.
- */
-static int
-get_hw_addr(name, ina, hwaddr)
-    char *name;
-    u_int32_t ina;
-    struct sockaddr *hwaddr;
-{
-    /* New way - get the address by doing an arp request. */
-    int s;
-    struct arpreq req;
-
-    s = socket(AF_INET, SOCK_DGRAM, 0);
-    if (s < 0)
-	return 0;
-    memset(&req, 0, sizeof(req));
-    req.arp_pa.sa_family = AF_INET;
-    INET_ADDR(req.arp_pa) = ina;
-    if (ioctl(s, SIOCGARP, &req) < 0) {
-	error("Couldn't get ARP entry for %s: %m", ip_ntoa(ina));
-	return 0;
-    }
-    *hwaddr = req.arp_ha;
-    hwaddr->sa_family = AF_UNSPEC;
-
-    return 1;
-}
-
-static int
-dlpi_attach(fd, ppa)
-    int fd, ppa;
-{
-    dl_attach_req_t req;
-    struct strbuf buf;
-
-    req.dl_primitive = DL_ATTACH_REQ;
-    req.dl_ppa = ppa;
-    buf.len = sizeof(req);
-    buf.buf = (void *) &req;
-    return putmsg(fd, &buf, NULL, RS_HIPRI);
-}
-
-static int
-dlpi_info_req(fd)
-    int fd;
-{
-    dl_info_req_t req;
-    struct strbuf buf;
-
-    req.dl_primitive = DL_INFO_REQ;
-    buf.len = sizeof(req);
-    buf.buf = (void *) &req;
-    return putmsg(fd, &buf, NULL, RS_HIPRI);
-}
-
-static int
-dlpi_get_reply(fd, reply, expected_prim, maxlen)
-    union DL_primitives *reply;
-    int fd, expected_prim, maxlen;
-{
-    struct strbuf buf;
-    int flags, n;
-    struct pollfd pfd;
-
-    /*
-     * Use poll to wait for a message with a timeout.
-     */
-    pfd.fd = fd;
-    pfd.events = POLLIN | POLLPRI;
-    do {
-	n = poll(&pfd, 1, 1000);
-    } while (n == -1 && errno == EINTR);
-    if (n <= 0)
-	return -1;
-
-    /*
-     * Get the reply.
-     */
-    buf.maxlen = maxlen;
-    buf.buf = (void *) reply;
-    flags = 0;
-    if (getmsg(fd, &buf, NULL, &flags) < 0)
-	return -1;
-
-    if (buf.len < sizeof(ulong)) {
-	if (debug)
-	    dbglog("dlpi response short (len=%d)\n", buf.len);
-	return -1;
-    }
-
-    if (reply->dl_primitive == expected_prim)
-	return 0;
-
-    if (debug) {
-	if (reply->dl_primitive == DL_ERROR_ACK) {
-	    dbglog("dlpi error %d (unix errno %d) for prim %x\n",
-		   reply->error_ack.dl_errno, reply->error_ack.dl_unix_errno,
-		   reply->error_ack.dl_error_primitive);
-	} else {
-	    dbglog("dlpi unexpected response prim %x\n",
-		   reply->dl_primitive);
-	}
-    }
-
-    return -1;
-}
-
-/*
- * Return user specified netmask, modified by any mask we might determine
- * for address `addr' (in network byte order).
- * Here we scan through the system's list of interfaces, looking for
- * any non-point-to-point interfaces which might appear to be on the same
- * network as `addr'.  If we find any, we OR in their netmask to the
- * user-specified netmask.
- */
-u_int32_t
-GetMask(addr)
-    u_int32_t addr;
-{
-    u_int32_t mask, nmask, ina;
-    struct ifreq *ifr, *ifend, ifreq;
-    int nif;
-    struct ifconf ifc;
-
-    addr = ntohl(addr);
-    if (IN_CLASSA(addr))	/* determine network mask for address class */
-	nmask = IN_CLASSA_NET;
-    else if (IN_CLASSB(addr))
-	nmask = IN_CLASSB_NET;
-    else
-	nmask = IN_CLASSC_NET;
-    /* class D nets are disallowed by bad_ip_adrs */
-    mask = netmask | htonl(nmask);
-
-    /*
-     * Scan through the system's network interfaces.
-     */
-#ifdef SIOCGIFNUM
-    if (ioctl(ipfd, SIOCGIFNUM, &nif) < 0)
-#endif
-	nif = MAX_IFS;
-    ifc.ifc_len = nif * sizeof(struct ifreq);
-    ifc.ifc_buf = (caddr_t) malloc(ifc.ifc_len);
-    if (ifc.ifc_buf == 0)
-	return mask;
-    if (ioctl(ipfd, SIOCGIFCONF, &ifc) < 0) {
-	warn("Couldn't get system interface list: %m");
-	free(ifc.ifc_buf);
-	return mask;
-    }
-    ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
-    for (ifr = ifc.ifc_req; ifr < ifend; ++ifr) {
-	/*
-	 * Check the interface's internet address.
-	 */
-	if (ifr->ifr_addr.sa_family != AF_INET)
-	    continue;
-	ina = INET_ADDR(ifr->ifr_addr);
-	if ((ntohl(ina) & nmask) != (addr & nmask))
-	    continue;
-	/*
-	 * Check that the interface is up, and not point-to-point or loopback.
-	 */
-	strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-	if (ioctl(ipfd, SIOCGIFFLAGS, &ifreq) < 0)
-	    continue;
-	if ((ifreq.ifr_flags & (IFF_UP|IFF_POINTOPOINT|IFF_LOOPBACK))
-	    != IFF_UP)
-	    continue;
-	/*
-	 * Get its netmask and OR it into our mask.
-	 */
-	if (ioctl(ipfd, SIOCGIFNETMASK, &ifreq) < 0)
-	    continue;
-	mask |= INET_ADDR(ifreq.ifr_addr);
-    }
-
-    free(ifc.ifc_buf);
-    return mask;
-}
-
-/*
- * logwtmp - write an accounting record to the /var/adm/wtmp file.
- */
-void
-logwtmp(line, name, host)
-    const char *line, *name, *host;
-{
-    static struct utmpx utmpx;
-
-    if (name[0] != 0) {
-	/* logging in */
-	strncpy(utmpx.ut_user, name, sizeof(utmpx.ut_user));
-	strncpy(utmpx.ut_id, ifname, sizeof(utmpx.ut_id));
-	strncpy(utmpx.ut_line, line, sizeof(utmpx.ut_line));
-	utmpx.ut_pid = getpid();
-	utmpx.ut_type = USER_PROCESS;
-    } else {
-	utmpx.ut_type = DEAD_PROCESS;
-    }
-    gettimeofday(&utmpx.ut_tv, NULL);
-    updwtmpx("/var/adm/wtmpx", &utmpx);
-}
-
-/*
- * get_host_seed - return the serial number of this machine.
- */
-int
-get_host_seed()
-{
-    char buf[32];
-
-    if (sysinfo(SI_HW_SERIAL, buf, sizeof(buf)) < 0) {
-	error("sysinfo: %m");
-	return 0;
-    }
-    return (int) strtoul(buf, NULL, 16);
-}
-
-static int
-strioctl(fd, cmd, ptr, ilen, olen)
-    int fd, cmd, ilen, olen;
-    void *ptr;
-{
-    struct strioctl str;
-
-    str.ic_cmd = cmd;
-    str.ic_timout = 0;
-    str.ic_len = ilen;
-    str.ic_dp = ptr;
-    if (ioctl(fd, I_STR, &str) == -1)
-	return -1;
-    if (str.ic_len != olen)
-	dbglog("strioctl: expected %d bytes, got %d for cmd %x\n",
-	       olen, str.ic_len, cmd);
-    return 0;
-}
-
-#if 0
-/*
- * lock - create a lock file for the named lock device
- */
-
-#define LOCK_PREFIX	"/var/spool/locks/LK."
-static char lock_file[40];	/* name of lock file created */
-
-int
-lock(dev)
-    char *dev;
-{
-    int n, fd, pid;
-    struct stat sbuf;
-    char ascii_pid[12];
-
-    if (stat(dev, &sbuf) < 0) {
-	error("Can't get device number for %s: %m", dev);
-	return -1;
-    }
-    if ((sbuf.st_mode & S_IFMT) != S_IFCHR) {
-	error("Can't lock %s: not a character device", dev);
-	return -1;
-    }
-    slprintf(lock_file, sizeof(lock_file), "%s%03d.%03d.%03d",
-	     LOCK_PREFIX, major(sbuf.st_dev),
-	     major(sbuf.st_rdev), minor(sbuf.st_rdev));
-
-    while ((fd = open(lock_file, O_EXCL | O_CREAT | O_RDWR, 0644)) < 0) {
-	if (errno == EEXIST
-	    && (fd = open(lock_file, O_RDONLY, 0)) >= 0) {
-	    /* Read the lock file to find out who has the device locked */
-	    n = read(fd, ascii_pid, 11);
-	    if (n <= 0) {
-		error("Can't read pid from lock file %s", lock_file);
-		close(fd);
-	    } else {
-		ascii_pid[n] = 0;
-		pid = atoi(ascii_pid);
-		if (pid > 0 && kill(pid, 0) == -1 && errno == ESRCH) {
-		    /* pid no longer exists - remove the lock file */
-		    if (unlink(lock_file) == 0) {
-			close(fd);
-			notice("Removed stale lock on %s (pid %d)",
-			       dev, pid);
-			continue;
-		    } else
-			warn("Couldn't remove stale lock on %s",
-			       dev);
-		} else
-		    notice("Device %s is locked by pid %d",
-			   dev, pid);
-	    }
-	    close(fd);
-	} else
-	    error("Can't create lock file %s: %m", lock_file);
-	lock_file[0] = 0;
-	return -1;
-    }
-
-    slprintf(ascii_pid, sizeof(ascii_pid), "%10d\n", getpid());
-    write(fd, ascii_pid, 11);
-
-    close(fd);
-    return 1;
-}
-
-/*
- * unlock - remove our lockfile
- */
-void
-unlock()
-{
-    if (lock_file[0]) {
-	unlink(lock_file);
-	lock_file[0] = 0;
-    }
-}
-#endif
-
-/*
- * cifroute - delete a route through the addresses given.
- */
-int
-cifroute(u, our, his)
-    int u;
-    u_int32_t our, his;
-{
-    struct rtentry rt;
-
-    memset(&rt, 0, sizeof(rt));
-    rt.rt_dst.sa_family = AF_INET;
-    INET_ADDR(rt.rt_dst) = his;
-    rt.rt_gateway.sa_family = AF_INET;
-    INET_ADDR(rt.rt_gateway) = our;
-    rt.rt_flags = RTF_HOST;
-
-    if (ioctl(ipfd, SIOCDELRT, &rt) < 0) {
-	error("Can't delete route: %m");
-	return 0;
-    }
-
-    return 1;
-}
-
-/*
- * have_route_to - determine if the system has a route to the specified
- * IP address.  Returns 0 if not, 1 if so, -1 if we can't tell.
- * `addr' is in network byte order.
- * For demand mode to work properly, we have to ignore routes
- * through our own interface.
- */
-#ifndef T_CURRENT		/* needed for Solaris 2.5 */
-#define T_CURRENT	MI_T_CURRENT
-#endif
-
-int
-have_route_to(addr)
-    u_int32_t addr;
-{
-#ifdef SOL2
-    int fd, r, flags, i;
-    struct {
-	struct T_optmgmt_req req;
-	struct opthdr hdr;
-    } req;
-    union {
-	struct T_optmgmt_ack ack;
-	unsigned char space[64];
-    } ack;
-    struct opthdr *rh;
-    struct strbuf cbuf, dbuf;
-    int nroutes;
-    mib2_ipRouteEntry_t routes[8];
-    mib2_ipRouteEntry_t *rp;
-
-    fd = open(mux_dev_name, O_RDWR);
-    if (fd < 0) {
-	warn("have_route_to: couldn't open %s: %m", mux_dev_name);
-	return -1;
-    }
-
-    req.req.PRIM_type = T_OPTMGMT_REQ;
-    req.req.OPT_offset = (char *) &req.hdr - (char *) &req;
-    req.req.OPT_length = sizeof(req.hdr);
-    req.req.MGMT_flags = T_CURRENT;
-
-    req.hdr.level = MIB2_IP;
-    req.hdr.name = 0;
-    req.hdr.len = 0;
-
-    cbuf.buf = (char *) &req;
-    cbuf.len = sizeof(req);
-
-    if (putmsg(fd, &cbuf, NULL, 0) == -1) {
-	warn("have_route_to: putmsg: %m");
-	close(fd);
-	return -1;
-    }
-
-    for (;;) {
-	cbuf.buf = (char *) &ack;
-	cbuf.maxlen = sizeof(ack);
-	dbuf.buf = (char *) routes;
-	dbuf.maxlen = sizeof(routes);
-	flags = 0;
-	r = getmsg(fd, &cbuf, &dbuf, &flags);
-	if (r == -1) {
-	    warn("have_route_to: getmsg: %m");
-	    close(fd);
-	    return -1;
-	}
-
-	if (cbuf.len < sizeof(struct T_optmgmt_ack)
-	    || ack.ack.PRIM_type != T_OPTMGMT_ACK
-	    || ack.ack.MGMT_flags != T_SUCCESS
-	    || ack.ack.OPT_length < sizeof(struct opthdr)) {
-	    dbglog("have_route_to: bad message len=%d prim=%d",
-		   cbuf.len, ack.ack.PRIM_type);
-	    close(fd);
-	    return -1;
-	}
-
-	rh = (struct opthdr *) ((char *)&ack + ack.ack.OPT_offset);
-	if (rh->level == 0 && rh->name == 0)
-	    break;
-	if (rh->level != MIB2_IP || rh->name != MIB2_IP_21) {
-	    while (r == MOREDATA)
-		r = getmsg(fd, NULL, &dbuf, &flags);
-	    continue;
-	}
-
-	for (;;) {
-	    nroutes = dbuf.len / sizeof(mib2_ipRouteEntry_t);
-	    for (rp = routes, i = 0; i < nroutes; ++i, ++rp) {
-		if (rp->ipRouteMask != ~0) {
-		    dbglog("have_route_to: dest=%x gw=%x mask=%x\n",
-			   rp->ipRouteDest, rp->ipRouteNextHop,
-			   rp->ipRouteMask);
-		    if (((addr ^ rp->ipRouteDest) & rp->ipRouteMask) == 0
-			&& rp->ipRouteNextHop != remote_addr)
-			return 1;
-		}
-	    }
-	    if (r == 0)
-		break;
-	    r = getmsg(fd, NULL, &dbuf, &flags);
-	}
-    }
-    close(fd);
-    return 0;
-#else
-    return -1;
-#endif /* SOL2 */
-}
-
-/*
- * get_pty - get a pty master/slave pair and chown the slave side to
- * the uid given.  Assumes slave_name points to MAXPATHLEN bytes of space.
- */
-int
-get_pty(master_fdp, slave_fdp, slave_name, uid)
-    int *master_fdp;
-    int *slave_fdp;
-    char *slave_name;
-    int uid;
-{
-    int mfd, sfd;
-    char *pty_name;
-    struct termios tios;
-
-    mfd = open("/dev/ptmx", O_RDWR);
-    if (mfd < 0) {
-	error("Couldn't open pty master: %m");
-	return 0;
-    }
-
-    pty_name = ptsname(mfd);
-    if (pty_name == NULL) {
-	error("Couldn't get name of pty slave");
-	close(mfd);
-	return 0;
-    }
-    if (chown(pty_name, uid, -1) < 0)
-	warn("Couldn't change owner of pty slave: %m");
-    if (chmod(pty_name, S_IRUSR | S_IWUSR) < 0)
-	warn("Couldn't change permissions on pty slave: %m");
-    if (unlockpt(mfd) < 0)
-	warn("Couldn't unlock pty slave: %m");
-
-    sfd = open(pty_name, O_RDWR);
-    if (sfd < 0) {
-	error("Couldn't open pty slave %s: %m", pty_name);
-	close(mfd);
-	return 0;
-    }
-    if (ioctl(sfd, I_PUSH, "ptem") < 0)
-	warn("Couldn't push ptem module on pty slave: %m");
-
-    dbglog("Using %s", pty_name);
-    strlcpy(slave_name, pty_name, MAXPATHLEN);
-    *master_fdp = mfd;
-    *slave_fdp = sfd;
-
-    return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/sys-sunos4.c b/mdk-stage1/ppp/pppd/sys-sunos4.c
deleted file mode 100644
index 3344948e9..000000000
--- a/mdk-stage1/ppp/pppd/sys-sunos4.c
+++ /dev/null
@@ -1,1559 +0,0 @@
-/*
- * System-dependent procedures for pppd under SunOS 4.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdio.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <termios.h>
-#include <signal.h>
-#include <malloc.h>
-#include <utmp.h>
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <sys/sockio.h>
-#include <sys/stream.h>
-#include <sys/stropts.h>
-#include <sys/stat.h>
-#include <sys/time.h>
-#include <sys/poll.h>
-#include <net/if.h>
-#include <net/if_arp.h>
-#include <net/nit_if.h>
-#include <net/route.h>
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include <netinet/in.h>
-
-#include "pppd.h"
-
-#if defined(sun) && defined(sparc)
-#include <alloca.h>
-#ifndef __GNUC__
-extern void *alloca();
-#endif
-#endif /*sparc*/
-
-static const char rcsid[] = RCSID;
-
-static int	pppfd;
-static int	fdmuxid = -1;
-static int	iffd;
-static int	sockfd;
-
-static int	restore_term;
-static struct termios inittermios;
-static struct winsize wsinfo;	/* Initial window size info */
-static pid_t	parent_pid;	/* PID of our parent */
-
-extern u_char	inpacket_buf[];	/* borrowed from main.c */
-
-#define MAX_POLLFDS	32
-static struct pollfd pollfds[MAX_POLLFDS];
-static int n_pollfds;
-
-static int	link_mtu, link_mru;
-
-#define NMODULES	32
-static int	tty_nmodules;
-static char	tty_modules[NMODULES][FMNAMESZ+1];
-
-static int	if_is_up;	/* Interface has been marked up */
-static u_int32_t ifaddrs[2];	/* local and remote addresses */
-static u_int32_t default_route_gateway;	/* Gateway for default route added */
-static u_int32_t proxy_arp_addr;	/* Addr for proxy arp entry added */
-
-/* Prototypes for procedures local to this file. */
-static int translate_speed __P((int));
-static int baud_rate_of __P((int));
-static int get_ether_addr __P((u_int32_t, struct sockaddr *));
-static int strioctl __P((int, int, void *, int, int));
-
-
-/*
- * sys_init - System-dependent initialization.
- */
-void
-sys_init()
-{
-    int x;
-
-    /* Get an internet socket for doing socket ioctl's on. */
-    if ((sockfd = socket(AF_INET, SOCK_DGRAM, 0)) < 0)
-	fatal("Couldn't create IP socket: %m");
-
-    /*
-     * We may want to send a SIGHUP to the session leader associated
-     * with our controlling terminal later.  Because SunOS doesn't
-     * have getsid(), we make do with sending the signal to our
-     * parent process.
-     */
-    parent_pid = getppid();
-
-    /*
-     * Open the ppp device.
-     */
-    pppfd = open("/dev/ppp", O_RDWR | O_NONBLOCK, 0);
-    if (pppfd < 0)
-	fatal("Can't open /dev/ppp: %m");
-    if (kdebugflag) {
-	x = PPPDBG_LOG + PPPDBG_DRIVER;
-	strioctl(pppfd, PPPIO_DEBUG, &x, sizeof(int), 0);
-    }
-
-    /* Assign a new PPA and get its unit number. */
-    if (strioctl(pppfd, PPPIO_NEWPPA, &ifunit, 0, sizeof(int)) < 0)
-	fatal("Can't create new PPP interface: %m");
-
-    /*
-     * Open the ppp device again and push the if_ppp module on it.
-     */
-    iffd = open("/dev/ppp", O_RDWR, 0);
-    if (iffd < 0)
-	fatal("Can't open /dev/ppp (2): %m");
-    if (kdebugflag) {
-	x = PPPDBG_LOG + PPPDBG_DRIVER;
-	strioctl(iffd, PPPIO_DEBUG, &x, sizeof(int), 0);
-    }
-    if (strioctl(iffd, PPPIO_ATTACH, &ifunit, sizeof(int), 0) < 0)
-	fatal("Couldn't attach ppp interface to device: %m");
-    if (ioctl(iffd, I_PUSH, "if_ppp") < 0)
-	fatal("Can't push ppp interface module: %m");
-    if (kdebugflag) {
-	x = PPPDBG_LOG + PPPDBG_IF;
-	strioctl(iffd, PPPIO_DEBUG, &x, sizeof(int), 0);
-    }
-    if (strioctl(iffd, PPPIO_NEWPPA, &ifunit, sizeof(int), 0) < 0)
-	fatal("Couldn't create ppp interface unit: %m");
-    x = PPP_IP;
-    if (strioctl(iffd, PPPIO_BIND, &x, sizeof(int), 0) < 0)
-	fatal("Couldn't bind ppp interface to IP SAP: %m");
-
-    n_pollfds = 0;
-}
-
-/*
- * sys_cleanup - restore any system state we modified before exiting:
- * mark the interface down, delete default route and/or proxy arp entry.
- * This shouldn't call die() because it's called from die().
- */
-void
-sys_cleanup()
-{
-    if (if_is_up)
-	sifdown(0);
-    if (ifaddrs[0])
-	cifaddr(0, ifaddrs[0], ifaddrs[1]);
-    if (default_route_gateway)
-	cifdefaultroute(0, 0, default_route_gateway);
-    if (proxy_arp_addr)
-	cifproxyarp(0, proxy_arp_addr);
-}
-
-/*
- * sys_close - Clean up in a child process before execing.
- */
-void
-sys_close()
-{
-    close(iffd);
-    close(pppfd);
-    close(sockfd);
-}
-
-/*
- * sys_check_options - check the options that the user specified
- */
-int
-sys_check_options()
-{
-    return 1;
-}
-
-#if 0
-/*
- * daemon - Detach us from controlling terminal session.
- */
-int
-daemon(nochdir, noclose)
-    int nochdir, noclose;
-{
-    int pid;
-
-    if ((pid = fork()) < 0)
-	return -1;
-    if (pid != 0)
-	exit(0);		/* parent dies */
-    setsid();
-    if (!nochdir)
-	chdir("/");
-    if (!noclose) {
-	fclose(stdin);		/* don't need stdin, stdout, stderr */
-	fclose(stdout);
-	fclose(stderr);
-    }
-    return 0;
-}
-#endif
-
-/*
- * ppp_available - check whether the system has any ppp interfaces
- */
-int
-ppp_available()
-{
-    struct stat buf;
-
-    return stat("/dev/ppp", &buf) >= 0;
-}
-
-/*
- * tty_establish_ppp - Turn the serial port into a ppp interface.
- */
-int
-tty_establish_ppp(fd)
-    int fd;
-{
-    int i;
-
-    /* Pop any existing modules off the tty stream. */
-    for (i = 0;; ++i)
-	if (ioctl(fd, I_LOOK, tty_modules[i]) < 0
-	    || ioctl(fd, I_POP, 0) < 0)
-	    break;
-    tty_nmodules = i;
-
-    /* Push the async hdlc module and the compressor module. */
-    if (ioctl(fd, I_PUSH, "ppp_ahdl") < 0)
-	fatal("Couldn't push PPP Async HDLC module: %m");
-    if (ioctl(fd, I_PUSH, "ppp_comp") < 0)
-	error("Couldn't push PPP compression module: %m");
-
-    /* Link the serial port under the PPP multiplexor. */
-    if ((fdmuxid = ioctl(pppfd, I_LINK, fd)) < 0)
-	fatal("Can't link tty to PPP mux: %m");
-
-    return pppfd;
-}
-
-/*
- * disestablish_ppp - Restore the serial port to normal operation.
- * It attempts to reconstruct the stream with the previously popped
- * modules.  This shouldn't call die() because it's called from die().
- */
-void
-tty_disestablish_ppp(fd)
-    int fd;
-{
-    int i;
-
-    if (fdmuxid >= 0) {
-	if (ioctl(pppfd, I_UNLINK, fdmuxid) < 0) {
-	    if (!hungup)
-		error("Can't unlink tty from PPP mux: %m");
-	}
-	fdmuxid = -1;
-
-	if (!hungup) {
-	    while (ioctl(fd, I_POP, 0) >= 0)
-		;
-	    for (i = tty_nmodules - 1; i >= 0; --i)
-		if (ioctl(fd, I_PUSH, tty_modules[i]) < 0)
-		    error("Couldn't restore tty module %s: %m",
-			   tty_modules[i]);
-	}
-	if (hungup && default_device && parent_pid > 0) {
-	    /*
-	     * If we have received a hangup, we need to send a SIGHUP
-	     * to the terminal's controlling process.  The reason is
-	     * that the original stream head for the terminal hasn't
-	     * seen the M_HANGUP message (it went up through the ppp
-	     * driver to the stream head for our fd to /dev/ppp).
-	     * Actually we send the signal to the process that invoked
-	     * pppd, since SunOS doesn't have getsid().
-	     */
-	    kill(parent_pid, SIGHUP);
-	}
-    }
-}
-
-/*
- * Check whether the link seems not to be 8-bit clean.
- */
-void
-clean_check()
-{
-    int x;
-    char *s;
-
-    if (strioctl(pppfd, PPPIO_GCLEAN, &x, 0, sizeof(x)) < 0)
-	return;
-    s = NULL;
-    switch (~x) {
-    case RCV_B7_0:
-	s = "bit 7 set to 1";
-	break;
-    case RCV_B7_1:
-	s = "bit 7 set to 0";
-	break;
-    case RCV_EVNP:
-	s = "odd parity";
-	break;
-    case RCV_ODDP:
-	s = "even parity";
-	break;
-    }
-    if (s != NULL) {
-	warn("Serial link is not 8-bit clean:");
-	warn("All received characters had %s", s);
-    }
-}
-
-/*
- * List of valid speeds.
- */
-struct speed {
-    int speed_int, speed_val;
-} speeds[] = {
-#ifdef B50
-    { 50, B50 },
-#endif
-#ifdef B75
-    { 75, B75 },
-#endif
-#ifdef B110
-    { 110, B110 },
-#endif
-#ifdef B134
-    { 134, B134 },
-#endif
-#ifdef B150
-    { 150, B150 },
-#endif
-#ifdef B200
-    { 200, B200 },
-#endif
-#ifdef B300
-    { 300, B300 },
-#endif
-#ifdef B600
-    { 600, B600 },
-#endif
-#ifdef B1200
-    { 1200, B1200 },
-#endif
-#ifdef B1800
-    { 1800, B1800 },
-#endif
-#ifdef B2000
-    { 2000, B2000 },
-#endif
-#ifdef B2400
-    { 2400, B2400 },
-#endif
-#ifdef B3600
-    { 3600, B3600 },
-#endif
-#ifdef B4800
-    { 4800, B4800 },
-#endif
-#ifdef B7200
-    { 7200, B7200 },
-#endif
-#ifdef B9600
-    { 9600, B9600 },
-#endif
-#ifdef B19200
-    { 19200, B19200 },
-#endif
-#ifdef B38400
-    { 38400, B38400 },
-#endif
-#ifdef EXTA
-    { 19200, EXTA },
-#endif
-#ifdef EXTB
-    { 38400, EXTB },
-#endif
-#ifdef B57600
-    { 57600, B57600 },
-#endif
-#ifdef B115200
-    { 115200, B115200 },
-#endif
-    { 0, 0 }
-};
-
-/*
- * Translate from bits/second to a speed_t.
- */
-static int
-translate_speed(bps)
-    int bps;
-{
-    struct speed *speedp;
-
-    if (bps == 0)
-	return 0;
-    for (speedp = speeds; speedp->speed_int; speedp++)
-	if (bps == speedp->speed_int)
-	    return speedp->speed_val;
-    warn("speed %d not supported", bps);
-    return 0;
-}
-
-/*
- * Translate from a speed_t to bits/second.
- */
-static int
-baud_rate_of(speed)
-    int speed;
-{
-    struct speed *speedp;
-
-    if (speed == 0)
-	return 0;
-    for (speedp = speeds; speedp->speed_int; speedp++)
-	if (speed == speedp->speed_val)
-	    return speedp->speed_int;
-    return 0;
-}
-
-/*
- * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
- * at the requested speed, etc.  If `local' is true, set CLOCAL
- * regardless of whether the modem option was specified.
- */
-void
-set_up_tty(fd, local)
-    int fd, local;
-{
-    int speed;
-    struct termios tios;
-
-    if (tcgetattr(fd, &tios) < 0)
-	fatal("tcgetattr: %m");
-
-    if (!restore_term) {
-	inittermios = tios;
-	ioctl(fd, TIOCGWINSZ, &wsinfo);
-    }
-
-    tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
-    if (crtscts > 0)
-	tios.c_cflag |= CRTSCTS;
-    else if (crtscts < 0)
-	tios.c_cflag &= ~CRTSCTS;
-
-    tios.c_cflag |= CS8 | CREAD | HUPCL;
-    if (local || !modem)
-	tios.c_cflag |= CLOCAL;
-    tios.c_iflag = IGNBRK | IGNPAR;
-    tios.c_oflag = 0;
-    tios.c_lflag = 0;
-    tios.c_cc[VMIN] = 1;
-    tios.c_cc[VTIME] = 0;
-
-    if (crtscts == -2) {
-	tios.c_iflag |= IXON | IXOFF;
-	tios.c_cc[VSTOP] = 0x13;	/* DC3 = XOFF = ^S */
-	tios.c_cc[VSTART] = 0x11;	/* DC1 = XON  = ^Q */
-    }
-
-    speed = translate_speed(inspeed);
-    if (speed) {
-	cfsetospeed(&tios, speed);
-	cfsetispeed(&tios, speed);
-    } else {
-	speed = cfgetospeed(&tios);
-	/*
-	 * We can't proceed if the serial port speed is 0,
-	 * since that implies that the serial port is disabled.
-	 */
-	if (speed == B0)
-	    fatal("Baud rate for %s is 0; need explicit baud rate", devnam);
-    }
-
-    if (tcsetattr(fd, TCSAFLUSH, &tios) < 0)
-	fatal("tcsetattr: %m");
-
-    baud_rate = inspeed = baud_rate_of(speed);
-    restore_term = 1;
-}
-
-/*
- * restore_tty - restore the terminal to the saved settings.
- */
-void
-restore_tty(fd)
-    int fd;
-{
-    if (restore_term) {
-	if (!default_device) {
-	    /*
-	     * Turn off echoing, because otherwise we can get into
-	     * a loop with the tty and the modem echoing to each other.
-	     * We presume we are the sole user of this tty device, so
-	     * when we close it, it will revert to its defaults anyway.
-	     */
-	    inittermios.c_lflag &= ~(ECHO | ECHONL);
-	}
-	if (tcsetattr(fd, TCSAFLUSH, &inittermios) < 0)
-	    if (!hungup && errno != ENXIO)
-		warn("tcsetattr: %m");
-	ioctl(fd, TIOCSWINSZ, &wsinfo);
-	restore_term = 0;
-    }
-}
-
-/*
- * setdtr - control the DTR line on the serial port.
- * This is called from die(), so it shouldn't call die().
- */
-void
-setdtr(fd, on)
-int fd, on;
-{
-    int modembits = TIOCM_DTR;
-
-    ioctl(fd, (on? TIOCMBIS: TIOCMBIC), &modembits);
-}
-
-/*
- * open_loopback - open the device we use for getting packets
- * in demand mode.  Under SunOS, we use our existing fd
- * to the ppp driver.
- */
-int
-open_ppp_loopback()
-{
-    return pppfd;
-}
-
-/*
- * output - Output PPP packet.
- */
-void
-output(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    struct strbuf data;
-    int retries;
-    struct pollfd pfd;
-
-    if (debug)
-	dbglog("sent %P", p, len);
-
-    data.len = len;
-    data.buf = (caddr_t) p;
-    retries = 4;
-    while (putmsg(pppfd, NULL, &data, 0) < 0) {
-	if (--retries < 0 || (errno != EWOULDBLOCK && errno != EAGAIN)) {
-	    if (errno != ENXIO)
-		error("Couldn't send packet: %m");
-	    break;
-	}
-	pfd.fd = pppfd;
-	pfd.events = POLLOUT;
-	poll(&pfd, 1, 250);	/* wait for up to 0.25 seconds */
-    }
-}
-
-
-/*
- * wait_input - wait until there is data available,
- * for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-void
-wait_input(timo)
-    struct timeval *timo;
-{
-    int t;
-
-    t = timo == NULL? -1: timo->tv_sec * 1000 + timo->tv_usec / 1000;
-    if (poll(pollfds, n_pollfds, t) < 0 && errno != EINTR) {
-	if (errno != EAGAIN)
-	    fatal("poll: %m");
-	/* we can get EAGAIN on a heavily loaded system,
-	 * just wait a short time and try again. */
-	usleep(50000);
-    }
-}
-
-/*
- * add_fd - add an fd to the set that wait_input waits for.
- */
-void add_fd(fd)
-    int fd;
-{
-    int n;
-
-    for (n = 0; n < n_pollfds; ++n)
-	if (pollfds[n].fd == fd)
-	    return;
-    if (n_pollfds < MAX_POLLFDS) {
-	pollfds[n_pollfds].fd = fd;
-	pollfds[n_pollfds].events = POLLIN | POLLPRI | POLLHUP;
-	++n_pollfds;
-    } else
-	error("Too many inputs!");
-}
-
-/*
- * remove_fd - remove an fd from the set that wait_input waits for.
- */
-void remove_fd(fd)
-    int fd;
-{
-    int n;
-
-    for (n = 0; n < n_pollfds; ++n) {
-	if (pollfds[n].fd == fd) {
-	    while (++n < n_pollfds)
-		pollfds[n-1] = pollfds[n];
-	    --n_pollfds;
-	    break;
-	}
-    }
-}
-
-#if 0
-/*
- * wait_loop_output - wait until there is data available on the
- * loopback, for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-void
-wait_loop_output(timo)
-    struct timeval *timo;
-{
-    wait_input(timo);
-}
-
-/*
- * wait_time - wait for a given length of time or until a
- * signal is received.
- */
-void
-wait_time(timo)
-    struct timeval *timo;
-{
-    int n;
-
-    n = select(0, NULL, NULL, NULL, timo);
-    if (n < 0 && errno != EINTR)
-	fatal("select: %m");
-}
-#endif
-
-/*
- * read_packet - get a PPP packet from the serial device.
- */
-int
-read_packet(buf)
-    u_char *buf;
-{
-    struct strbuf ctrl, data;
-    int flags, len;
-    unsigned char ctrlbuf[64];
-
-    for (;;) {
-	data.maxlen = PPP_MRU + PPP_HDRLEN;
-	data.buf = (caddr_t) buf;
-	ctrl.maxlen = sizeof(ctrlbuf);
-	ctrl.buf = (caddr_t) ctrlbuf;
-	flags = 0;
-	len = getmsg(pppfd, &ctrl, &data, &flags);
-	if (len < 0) {
-	    if (errno == EAGAIN || errno == EINTR)
-		return -1;
-	    fatal("Error reading packet: %m");
-	}
-
-	if (ctrl.len <= 0)
-	    return data.len;
-
-	/*
-	 * Got a M_PROTO or M_PCPROTO message.  Huh?
-	 */
-	if (debug)
-	    dbglog("got ctrl msg len=%d", ctrl.len);
-
-    }
-}
-
-/*
- * get_loop_output - get outgoing packets from the ppp device,
- * and detect when we want to bring the real link up.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- */
-int
-get_loop_output()
-{
-    int len;
-    int rv = 0;
-
-    while ((len = read_packet(inpacket_buf)) > 0) {
-	if (loop_frame(inpacket_buf, len))
-	    rv = 1;
-    }
-    return rv;
-}
-
-/*
- * ppp_send_config - configure the transmit characteristics of
- * the ppp interface.
- */
-void
-ppp_send_config(unit, mtu, asyncmap, pcomp, accomp)
-    int unit, mtu;
-    u_int32_t asyncmap;
-    int pcomp, accomp;
-{
-    int cf[2];
-    struct ifreq ifr;
-
-    link_mtu = mtu;
-    if (strioctl(pppfd, PPPIO_MTU, &mtu, sizeof(mtu), 0) < 0) {
-	if (hungup && errno == ENXIO)
-	    return;
-	error("Couldn't set MTU: %m");
-    }
-    if (strioctl(pppfd, PPPIO_XACCM, &asyncmap, sizeof(asyncmap), 0) < 0) {
-	error("Couldn't set transmit ACCM: %m");
-    }
-    cf[0] = (pcomp? COMP_PROT: 0) + (accomp? COMP_AC: 0);
-    cf[1] = COMP_PROT | COMP_AC;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	error("Couldn't set prot/AC compression: %m");
-    }
-
-    /* set mtu for ip as well */
-    memset(&ifr, 0, sizeof(ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    ifr.ifr_metric = link_mtu;
-    if (ioctl(sockfd, SIOCSIFMTU, &ifr) < 0) {
-	error("Couldn't set IP MTU: %m");
-    }
-}
-
-/*
- * ppp_set_xaccm - set the extended transmit ACCM for the interface.
- */
-void
-ppp_set_xaccm(unit, accm)
-    int unit;
-    ext_accm accm;
-{
-    if (strioctl(pppfd, PPPIO_XACCM, accm, sizeof(ext_accm), 0) < 0) {
-	if (!hungup || errno != ENXIO)
-	    warn("Couldn't set extended ACCM: %m");
-    }
-}
-
-/*
- * ppp_recv_config - configure the receive-side characteristics of
- * the ppp interface.
- */
-void
-ppp_recv_config(unit, mru, asyncmap, pcomp, accomp)
-    int unit, mru;
-    u_int32_t asyncmap;
-    int pcomp, accomp;
-{
-    int cf[2];
-
-    link_mru = mru;
-    if (strioctl(pppfd, PPPIO_MRU, &mru, sizeof(mru), 0) < 0) {
-	if (hungup && errno == ENXIO)
-	    return;
-	error("Couldn't set MRU: %m");
-    }
-    if (strioctl(pppfd, PPPIO_RACCM, &asyncmap, sizeof(asyncmap), 0) < 0) {
-	error("Couldn't set receive ACCM: %m");
-    }
-    cf[0] = (pcomp? DECOMP_PROT: 0) + (accomp? DECOMP_AC: 0);
-    cf[1] = DECOMP_PROT | DECOMP_AC;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	error("Couldn't set prot/AC decompression: %m");
-    }
-}
-
-/*
- * ccp_test - ask kernel whether a given compression method
- * is acceptable for use.
- */
-int
-ccp_test(unit, opt_ptr, opt_len, for_transmit)
-    int unit, opt_len, for_transmit;
-    u_char *opt_ptr;
-{
-    if (strioctl(pppfd, (for_transmit? PPPIO_XCOMP: PPPIO_RCOMP),
-		 opt_ptr, opt_len, 0) >= 0)
-	return 1;
-    return (errno == ENOSR)? 0: -1;
-}
-
-/*
- * ccp_flags_set - inform kernel about the current state of CCP.
- */
-void
-ccp_flags_set(unit, isopen, isup)
-    int unit, isopen, isup;
-{
-    int cf[2];
-
-    cf[0] = (isopen? CCP_ISOPEN: 0) + (isup? CCP_ISUP: 0);
-    cf[1] = CCP_ISOPEN | CCP_ISUP | CCP_ERROR | CCP_FATALERROR;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	if (!hungup || errno != ENXIO)
-	    error("Couldn't set kernel CCP state: %m");
-    }
-}
-
-/*
- * get_idle_time - return how long the link has been idle.
- */
-int
-get_idle_time(u, ip)
-    int u;
-    struct ppp_idle *ip;
-{
-    return strioctl(pppfd, PPPIO_GIDLE, ip, 0, sizeof(struct ppp_idle)) >= 0;
-}
-
-/*
- * get_ppp_stats - return statistics for the link.
- */
-int
-get_ppp_stats(u, stats)
-    int u;
-    struct pppd_stats *stats;
-{
-    struct ppp_stats s;
-
-    if (strioctl(pppfd, PPPIO_GETSTAT, &s, 0, sizeof(s)) < 0) {
-	error("Couldn't get link statistics: %m");
-	return 0;
-    }
-    stats->bytes_in = s.p.ppp_ibytes;
-    stats->bytes_out = s.p.ppp_obytes;
-    return 1;
-}
-
-
-/*
- * ccp_fatal_error - returns 1 if decompression was disabled as a
- * result of an error detected after decompression of a packet,
- * 0 otherwise.  This is necessary because of patent nonsense.
- */
-int
-ccp_fatal_error(unit)
-    int unit;
-{
-    int cf[2];
-
-    cf[0] = cf[1] = 0;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	if (errno != ENXIO && errno != EINVAL)
-	    error("Couldn't get compression flags: %m");
-	return 0;
-    }
-    return cf[0] & CCP_FATALERROR;
-}
-
-/*
- * sifvjcomp - config tcp header compression
- */
-int
-sifvjcomp(u, vjcomp, xcidcomp, xmaxcid)
-    int u, vjcomp, xcidcomp, xmaxcid;
-{
-    int cf[2];
-    char maxcid[2];
-
-    if (vjcomp) {
-	maxcid[0] = xcidcomp;
-	maxcid[1] = 15;		/* XXX should be rmaxcid */
-	if (strioctl(pppfd, PPPIO_VJINIT, maxcid, sizeof(maxcid), 0) < 0) {
-	    error("Couldn't initialize VJ compression: %m");
-	}
-    }
-
-    cf[0] = (vjcomp? COMP_VJC + DECOMP_VJC: 0)	/* XXX this is wrong */
-	+ (xcidcomp? COMP_VJCCID + DECOMP_VJCCID: 0);
-    cf[1] = COMP_VJC + DECOMP_VJC + COMP_VJCCID + DECOMP_VJCCID;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	if (vjcomp)
-	    error("Couldn't enable VJ compression: %m");
-    }
-
-    return 1;
-}
-
-/*
- * sifup - Config the interface up and enable IP packets to pass.
- */
-int
-sifup(u)
-    int u;
-{
-    struct ifreq ifr;
-
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sockfd, SIOCGIFFLAGS, &ifr) < 0) {
-	error("Couldn't mark interface up (get): %m");
-	return 0;
-    }
-    ifr.ifr_flags |= IFF_UP;
-    if (ioctl(sockfd, SIOCSIFFLAGS, &ifr) < 0) {
-	error("Couldn't mark interface up (set): %m");
-	return 0;
-    }
-    if_is_up = 1;
-    return 1;
-}
-
-/*
- * sifdown - Config the interface down and disable IP.
- */
-int
-sifdown(u)
-    int u;
-{
-    struct ifreq ifr;
-
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sockfd, SIOCGIFFLAGS, &ifr) < 0) {
-	error("Couldn't mark interface down (get): %m");
-	return 0;
-    }
-    if ((ifr.ifr_flags & IFF_UP) != 0) {
-	ifr.ifr_flags &= ~IFF_UP;
-	if (ioctl(sockfd, SIOCSIFFLAGS, &ifr) < 0) {
-	    error("Couldn't mark interface down (set): %m");
-	    return 0;
-	}
-    }
-    if_is_up = 0;
-    return 1;
-}
-
-/*
- * sifnpmode - Set the mode for handling packets for a given NP.
- */
-int
-sifnpmode(u, proto, mode)
-    int u;
-    int proto;
-    enum NPmode mode;
-{
-    int npi[2];
-
-    npi[0] = proto;
-    npi[1] = (int) mode;
-    if (strioctl(pppfd, PPPIO_NPMODE, npi, 2 * sizeof(int), 0) < 0) {
-	error("ioctl(set NP %d mode to %d): %m", proto, mode);
-	return 0;
-    }
-    return 1;
-}
-
-#define INET_ADDR(x)	(((struct sockaddr_in *) &(x))->sin_addr.s_addr)
-
-/*
- * sifaddr - Config the interface IP addresses and netmask.
- */
-int
-sifaddr(u, o, h, m)
-    int u;
-    u_int32_t o, h, m;
-{
-    struct ifreq ifr;
-
-    memset(&ifr, 0, sizeof(ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    ifr.ifr_addr.sa_family = AF_INET;
-    INET_ADDR(ifr.ifr_addr) = m;
-    if (ioctl(sockfd, SIOCSIFNETMASK, &ifr) < 0) {
-	error("Couldn't set IP netmask: %m");
-    }
-    ifr.ifr_addr.sa_family = AF_INET;
-    INET_ADDR(ifr.ifr_addr) = o;
-    if (ioctl(sockfd, SIOCSIFADDR, &ifr) < 0) {
-	error("Couldn't set local IP address: %m");
-    }
-    ifr.ifr_dstaddr.sa_family = AF_INET;
-    INET_ADDR(ifr.ifr_dstaddr) = h;
-    if (ioctl(sockfd, SIOCSIFDSTADDR, &ifr) < 0) {
-	error("Couldn't set remote IP address: %m");
-    }
-#if 0	/* now done in ppp_send_config */
-    ifr.ifr_metric = link_mtu;
-    if (ioctl(sockfd, SIOCSIFMTU, &ifr) < 0) {
-	error("Couldn't set IP MTU: %m");
-    }
-#endif
-    ifaddrs[0] = o;
-    ifaddrs[1] = h;
-
-    return 1;
-}
-
-/*
- * cifaddr - Clear the interface IP addresses, and delete routes
- * through the interface if possible.
- */
-int
-cifaddr(u, o, h)
-    int u;
-    u_int32_t o, h;
-{
-    struct rtentry rt;
-
-    bzero(&rt, sizeof(rt));
-    rt.rt_dst.sa_family = AF_INET;
-    INET_ADDR(rt.rt_dst) = h;
-    rt.rt_gateway.sa_family = AF_INET;
-    INET_ADDR(rt.rt_gateway) = o;
-    rt.rt_flags = RTF_HOST;
-    if (ioctl(sockfd, SIOCDELRT, &rt) < 0)
-	error("Couldn't delete route through interface: %m");
-    ifaddrs[0] = 0;
-    return 1;
-}
-
-/*
- * sifdefaultroute - assign a default route through the address given.
- */
-int
-sifdefaultroute(u, l, g)
-    int u;
-    u_int32_t l, g;
-{
-    struct rtentry rt;
-
-    bzero(&rt, sizeof(rt));
-    rt.rt_dst.sa_family = AF_INET;
-    INET_ADDR(rt.rt_dst) = 0;
-    rt.rt_gateway.sa_family = AF_INET;
-    INET_ADDR(rt.rt_gateway) = g;
-    rt.rt_flags = RTF_GATEWAY;
-
-    if (ioctl(sockfd, SIOCADDRT, &rt) < 0) {
-	error("Can't add default route: %m");
-	return 0;
-    }
-
-    default_route_gateway = g;
-    return 1;
-}
-
-/*
- * cifdefaultroute - delete a default route through the address given.
- */
-int
-cifdefaultroute(u, l, g)
-    int u;
-    u_int32_t l, g;
-{
-    struct rtentry rt;
-
-    bzero(&rt, sizeof(rt));
-    rt.rt_dst.sa_family = AF_INET;
-    INET_ADDR(rt.rt_dst) = 0;
-    rt.rt_gateway.sa_family = AF_INET;
-    INET_ADDR(rt.rt_gateway) = g;
-    rt.rt_flags = RTF_GATEWAY;
-
-    if (ioctl(sockfd, SIOCDELRT, &rt) < 0) {
-	error("Can't delete default route: %m");
-	return 0;
-    }
-
-    default_route_gateway = 0;
-    return 1;
-}
-
-/*
- * sifproxyarp - Make a proxy ARP entry for the peer.
- */
-int
-sifproxyarp(unit, hisaddr)
-    int unit;
-    u_int32_t hisaddr;
-{
-    struct arpreq arpreq;
-
-    bzero(&arpreq, sizeof(arpreq));
-    if (!get_ether_addr(hisaddr, &arpreq.arp_ha))
-	return 0;
-
-    arpreq.arp_pa.sa_family = AF_INET;
-    INET_ADDR(arpreq.arp_pa) = hisaddr;
-    arpreq.arp_flags = ATF_PERM | ATF_PUBL;
-    if (ioctl(sockfd, SIOCSARP, (caddr_t) &arpreq) < 0) {
-	error("Couldn't set proxy ARP entry: %m");
-	return 0;
-    }
-
-    proxy_arp_addr = hisaddr;
-    return 1;
-}
-
-/*
- * cifproxyarp - Delete the proxy ARP entry for the peer.
- */
-int
-cifproxyarp(unit, hisaddr)
-    int unit;
-    u_int32_t hisaddr;
-{
-    struct arpreq arpreq;
-
-    bzero(&arpreq, sizeof(arpreq));
-    arpreq.arp_pa.sa_family = AF_INET;
-    INET_ADDR(arpreq.arp_pa) = hisaddr;
-    if (ioctl(sockfd, SIOCDARP, (caddr_t)&arpreq) < 0) {
-	error("Couldn't delete proxy ARP entry: %m");
-	return 0;
-    }
-
-    proxy_arp_addr = 0;
-    return 1;
-}
-
-/*
- * get_ether_addr - get the hardware address of an interface on the
- * the same subnet as ipaddr.
- */
-#define MAX_IFS		32
-
-static int
-get_ether_addr(ipaddr, hwaddr)
-    u_int32_t ipaddr;
-    struct sockaddr *hwaddr;
-{
-    struct ifreq *ifr, *ifend;
-    u_int32_t ina, mask;
-    struct ifreq ifreq;
-    struct ifconf ifc;
-    struct ifreq ifs[MAX_IFS];
-    int nit_fd;
-
-    ifc.ifc_len = sizeof(ifs);
-    ifc.ifc_req = ifs;
-    if (ioctl(sockfd, SIOCGIFCONF, &ifc) < 0) {
-	error("ioctl(SIOCGIFCONF): %m");
-	return 0;
-    }
-
-    /*
-     * Scan through looking for an interface with an Internet
-     * address on the same subnet as `ipaddr'.
-     */
-    ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
-    for (ifr = ifc.ifc_req; ifr < ifend; ifr = (struct ifreq *)
-	    ((char *)&ifr->ifr_addr + sizeof(struct sockaddr))) {
-        if (ifr->ifr_addr.sa_family == AF_INET) {
-
-            /*
-             * Check that the interface is up, and not point-to-point
-             * or loopback.
-             */
-            strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-            if (ioctl(sockfd, SIOCGIFFLAGS, &ifreq) < 0)
-                continue;
-            if ((ifreq.ifr_flags &
-                 (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP))
-                 != (IFF_UP|IFF_BROADCAST))
-                continue;
-
-            /*
-             * Get its netmask and check that it's on the right subnet.
-             */
-            if (ioctl(sockfd, SIOCGIFNETMASK, &ifreq) < 0)
-                continue;
-            ina = ((struct sockaddr_in *) &ifr->ifr_addr)->sin_addr.s_addr;
-            mask = ((struct sockaddr_in *) &ifreq.ifr_addr)->sin_addr.s_addr;
-            if ((ipaddr & mask) != (ina & mask))
-                continue;
-
-            break;
-        }
-    }
-
-    if (ifr >= ifend)
-	return 0;
-    info("found interface %s for proxy arp", ifr->ifr_name);
-
-    /*
-     * Grab the physical address for this interface.
-     */
-    if ((nit_fd = open("/dev/nit", O_RDONLY)) < 0) {
-	error("Couldn't open /dev/nit: %m");
-	return 0;
-    }
-    strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-    if (ioctl(nit_fd, NIOCBIND, &ifreq) < 0
-	|| ioctl(nit_fd, SIOCGIFADDR, &ifreq) < 0) {
-	error("Couldn't get hardware address for %s: %m",
-	       ifreq.ifr_name);
-	close(nit_fd);
-	return 0;
-    }
-
-    hwaddr->sa_family = AF_UNSPEC;
-    memcpy(hwaddr->sa_data, ifreq.ifr_addr.sa_data, 6);
-    close(nit_fd);
-    return 1;
-}
-
-/*
- * have_route_to - determine if the system has any route to
- * a given IP address.
- * For demand mode to work properly, we have to ignore routes
- * through our own interface.
- */
-int have_route_to(addr)
-    u_int32_t addr;
-{
-    return -1;
-}
-
-#define	WTMPFILE	"/usr/adm/wtmp"
-
-void
-logwtmp(line, name, host)
-    const char *line, *name, *host;
-{
-    int fd;
-    struct stat buf;
-    struct utmp ut;
-
-    if ((fd = open(WTMPFILE, O_WRONLY|O_APPEND, 0)) < 0)
-	return;
-    if (!fstat(fd, &buf)) {
-	strncpy(ut.ut_line, line, sizeof(ut.ut_line));
-	strncpy(ut.ut_name, name, sizeof(ut.ut_name));
-	strncpy(ut.ut_host, host, sizeof(ut.ut_host));
-	(void)time(&ut.ut_time);
-	if (write(fd, (char *)&ut, sizeof(struct utmp)) != sizeof(struct utmp))
-	    (void)ftruncate(fd, buf.st_size);
-    }
-    close(fd);
-}
-
-/*
- * Return user specified netmask, modified by any mask we might determine
- * for address `addr' (in network byte order).
- * Here we scan through the system's list of interfaces, looking for
- * any non-point-to-point interfaces which might appear to be on the same
- * network as `addr'.  If we find any, we OR in their netmask to the
- * user-specified netmask.
- */
-u_int32_t
-GetMask(addr)
-    u_int32_t addr;
-{
-    u_int32_t mask, nmask, ina;
-    struct ifreq *ifr, *ifend, ifreq;
-    struct ifconf ifc;
-
-    addr = ntohl(addr);
-    if (IN_CLASSA(addr))	/* determine network mask for address class */
-	nmask = IN_CLASSA_NET;
-    else if (IN_CLASSB(addr))
-	nmask = IN_CLASSB_NET;
-    else
-	nmask = IN_CLASSC_NET;
-    /* class D nets are disallowed by bad_ip_adrs */
-    mask = netmask | htonl(nmask);
-
-    /*
-     * Scan through the system's network interfaces.
-     */
-    ifc.ifc_len = MAX_IFS * sizeof(struct ifreq);
-    ifc.ifc_req = alloca(ifc.ifc_len);
-    if (ifc.ifc_req == 0)
-	return mask;
-    if (ioctl(sockfd, SIOCGIFCONF, &ifc) < 0) {
-	warn("Couldn't get system interface list: %m");
-	return mask;
-    }
-    ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
-    for (ifr = ifc.ifc_req; ifr < ifend; ++ifr) {
-	/*
-	 * Check the interface's internet address.
-	 */
-	if (ifr->ifr_addr.sa_family != AF_INET)
-	    continue;
-	ina = INET_ADDR(ifr->ifr_addr);
-	if ((ntohl(ina) & nmask) != (addr & nmask))
-	    continue;
-	/*
-	 * Check that the interface is up, and not point-to-point or loopback.
-	 */
-	strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-	if (ioctl(sockfd, SIOCGIFFLAGS, &ifreq) < 0)
-	    continue;
-	if ((ifreq.ifr_flags & (IFF_UP|IFF_POINTOPOINT|IFF_LOOPBACK))
-	    != IFF_UP)
-	    continue;
-	/*
-	 * Get its netmask and OR it into our mask.
-	 */
-	if (ioctl(sockfd, SIOCGIFNETMASK, &ifreq) < 0)
-	    continue;
-	mask |= INET_ADDR(ifreq.ifr_addr);
-    }
-
-    return mask;
-}
-
-static int
-strioctl(fd, cmd, ptr, ilen, olen)
-    int fd, cmd, ilen, olen;
-    void *ptr;
-{
-    struct strioctl str;
-
-    str.ic_cmd = cmd;
-    str.ic_timout = 0;
-    str.ic_len = ilen;
-    str.ic_dp = ptr;
-    if (ioctl(fd, I_STR, &str) == -1)
-	return -1;
-    if (str.ic_len != olen)
-	dbglog("strioctl: expected %d bytes, got %d for cmd %x\n",
-	       olen, str.ic_len, cmd);
-    return 0;
-}
-
-/*
- * Use the hostid as part of the random number seed.
- */
-int
-get_host_seed()
-{
-    return gethostid();
-}
-
-#if 0
-/*
- * Code for locking/unlocking the serial device.
- * This code is derived from chat.c.
- */
-
-#if !defined(HDB) && !defined(SUNOS3)
-#define	HDB	1		/* ascii lock files are the default */
-#endif
-
-#ifndef LOCK_DIR
-# if HDB
-#  define	PIDSTRING
-#  define	LOCK_PREFIX	"/usr/spool/locks/LCK.."
-# else /* HDB */
-#  define	LOCK_PREFIX	"/usr/spool/uucp/LCK.."
-# endif /* HDB */
-#endif /* LOCK_DIR */
-
-static char *lock_file;		/* name of lock file created */
-
-/*
- * lock - create a lock file for the named device.
- */
-int
-lock(dev)
-    char *dev;
-{
-    char hdb_lock_buffer[12];
-    int fd, pid, n;
-    char *p;
-    size_t l;
-
-    if ((p = strrchr(dev, '/')) != NULL)
-	dev = p + 1;
-    l = strlen(LOCK_PREFIX) + strlen(dev) + 1;
-    lock_file = malloc(l);
-    if (lock_file == NULL)
-	novm("lock file name");
-    slprintf(lock_file, l, "%s%s", LOCK_PREFIX, dev);
-
-    while ((fd = open(lock_file, O_EXCL | O_CREAT | O_RDWR, 0644)) < 0) {
-	if (errno == EEXIST
-	    && (fd = open(lock_file, O_RDONLY, 0)) >= 0) {
-	    /* Read the lock file to find out who has the device locked */
-#ifdef PIDSTRING
-	    n = read(fd, hdb_lock_buffer, 11);
-	    if (n > 0) {
-		hdb_lock_buffer[n] = 0;
-		pid = atoi(hdb_lock_buffer);
-	    }
-#else
-	    n = read(fd, &pid, sizeof(pid));
-#endif
-	    if (n <= 0) {
-		error("Can't read pid from lock file %s", lock_file);
-		close(fd);
-	    } else {
-		if (kill(pid, 0) == -1 && errno == ESRCH) {
-		    /* pid no longer exists - remove the lock file */
-		    if (unlink(lock_file) == 0) {
-			close(fd);
-			notice("Removed stale lock on %s (pid %d)",
-			       dev, pid);
-			continue;
-		    } else
-			warn("Couldn't remove stale lock on %s",
-			       dev);
-		} else
-		    notice("Device %s is locked by pid %d",
-			   dev, pid);
-	    }
-	    close(fd);
-	} else
-	    error("Can't create lock file %s: %m", lock_file);
-	free(lock_file);
-	lock_file = NULL;
-	return -1;
-    }
-
-#ifdef PIDSTRING
-    slprintf(hdb_lock_buffer, sizeof(hdb_lock_buffer), "%10d\n", getpid());
-    write(fd, hdb_lock_buffer, 11);
-#else
-    pid = getpid();
-    write(fd, &pid, sizeof pid);
-#endif
-
-    close(fd);
-    return 0;
-}
-
-/*
- * unlock - remove our lockfile
- */
-void
-unlock()
-{
-    if (lock_file) {
-	unlink(lock_file);
-	free(lock_file);
-	lock_file = NULL;
-    }
-}
-#endif /* lock stuff removed */
-
-/*
- * get_pty - get a pty master/slave pair and chown the slave side
- * to the uid given.  Assumes slave_name points to >= 12 bytes of space.
- */
-int
-get_pty(master_fdp, slave_fdp, slave_name, uid)
-    int *master_fdp;
-    int *slave_fdp;
-    char *slave_name;
-    int uid;
-{
-    int i, mfd, sfd;
-    char pty_name[12];
-    struct termios tios;
-
-    sfd = -1;
-    for (i = 0; i < 64; ++i) {
-	slprintf(pty_name, sizeof(pty_name), "/dev/pty%c%x",
-		 'p' + i / 16, i % 16);
-	mfd = open(pty_name, O_RDWR, 0);
-	if (mfd >= 0) {
-	    pty_name[5] = 't';
-	    sfd = open(pty_name, O_RDWR | O_NOCTTY, 0);
-	    if (sfd >= 0)
-		break;
-	    close(mfd);
-	}
-    }
-    if (sfd < 0)
-	return 0;
-
-    strlcpy(slave_name, pty_name, 12);
-    *master_fdp = mfd;
-    *slave_fdp = sfd;
-    fchown(sfd, uid, -1);
-    fchmod(sfd, S_IRUSR | S_IWUSR);
-    if (tcgetattr(sfd, &tios) == 0) {
-	tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB);
-	tios.c_cflag |= CS8 | CREAD;
-	tios.c_iflag  = IGNPAR | CLOCAL;
-	tios.c_oflag  = 0;
-	tios.c_lflag  = 0;
-	if (tcsetattr(sfd, TCSAFLUSH, &tios) < 0)
-	    warn("couldn't set attributes on pty: %m");
-    } else
-	warn("couldn't get attributes on pty: %m");
-
-    return 1;
-}
-
-/*
- * SunOS doesn't have strtoul :-(
- */
-unsigned long
-strtoul(str, ptr, base)
-    char *str, **ptr;
-    int base;
-{
-    return (unsigned long) strtol(str, ptr, base);
-}
-
-/*
- * Or strerror :-(
- */
-extern char *sys_errlist[];
-extern int sys_nerr;
-
-char *
-strerror(n)
-    int n;
-{
-    static char unknown[32];
-
-    if (n > 0 && n < sys_nerr)
-	return sys_errlist[n];
-    slprintf(unknown, sizeof(unknown), "Error %d", n);
-    return unknown;
-}
diff --git a/mdk-stage1/ppp/pppd/tdb.c b/mdk-stage1/ppp/pppd/tdb.c
deleted file mode 100644
index 7fd58291e..000000000
--- a/mdk-stage1/ppp/pppd/tdb.c
+++ /dev/null
@@ -1,1282 +0,0 @@
-/* 
- * Database functions
- * Copyright (C) Andrew Tridgell 1999
- * 
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms AND provided that this software or
- * any derived work is only used as part of the PPP daemon (pppd)
- * and related utilities.
- * The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Note: this software is also available under the Gnu Public License
- * version 2 or later.
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <string.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <sys/mman.h>
-#include <sys/stat.h>
-#include "tdb.h"
-
-#define TDB_VERSION (0x26011967 + 1)
-#define TDB_MAGIC (0x26011999U)
-#define TDB_FREE_MAGIC (~TDB_MAGIC)
-#define TDB_ALIGN 4
-#define MIN_REC_SIZE (2*sizeof(struct list_struct) + TDB_ALIGN)
-#define DEFAULT_HASH_SIZE 128
-#define TDB_PAGE_SIZE 0x2000
-#define TDB_LEN_MULTIPLIER 10
-#define FREELIST_TOP (sizeof(struct tdb_header))
-
-#define LOCK_SET 1
-#define LOCK_CLEAR 0
-
-/* lock offsets */
-#define GLOBAL_LOCK 0
-#define ACTIVE_LOCK 4
-#define LIST_LOCK_BASE 1024
-
-#define BUCKET(hash) ((hash) % tdb->header.hash_size)
-
-#ifndef MAP_FILE
-#define MAP_FILE 0
-#endif
-
-/* the body of the database is made of one list_struct for the free space
-   plus a separate data list for each hash value */
-struct list_struct {
-	tdb_len rec_len; /* total byte length of record */
-	tdb_off next; /* offset of the next record in the list */
-	tdb_len key_len; /* byte length of key */
-	tdb_len data_len; /* byte length of data */
-	unsigned full_hash; /* the full 32 bit hash of the key */
-	unsigned magic;   /* try to catch errors */
-	/*
-	   the following union is implied 
-	   union {
-              char record[rec_len];
-	      struct {
-	        char key[key_len];
-		char data[data_len];
-	      }
-           }
-	*/
-};
-
-/* a null data record - useful for error returns */
-static TDB_DATA null_data;
-
-/* a byte range locking function - return 0 on success
-   this functions locks/unlocks 1 byte at the specified offset */
-static int tdb_brlock(TDB_CONTEXT *tdb, tdb_off offset, 
-		      int set, int rw_type, int lck_type)
-{
-#if NOLOCK
-	return 0;
-#else
-	struct flock fl;
-
-        if (tdb->fd == -1) return 0;   /* for in memory tdb */
-
-	if (tdb->read_only) return -1;
-
-	fl.l_type = set==LOCK_SET?rw_type:F_UNLCK;
-	fl.l_whence = SEEK_SET;
-	fl.l_start = offset;
-	fl.l_len = 1;
-	fl.l_pid = 0;
-
-	if (fcntl(tdb->fd, lck_type, &fl) != 0) {
-#if TDB_DEBUG
-		if (lck_type == F_SETLKW) {
-			printf("lock %d failed at %d (%s)\n", 
-			       set, offset, strerror(errno));
-		}
-#endif
-		tdb->ecode = TDB_ERR_LOCK;
-		return -1;
-	}
-	return 0;
-#endif
-}
-
-/* lock a list in the database. list -1 is the alloc list */
-static int tdb_lock(TDB_CONTEXT *tdb, int list)
-{
-	if (list < -1 || list >= (int)tdb->header.hash_size) {
-#if TDB_DEBUG
-		printf("bad list %d\n", list);
-#endif
-		return -1;
-	}
-	if (tdb->locked[list+1] == 0) {
-		if (tdb_brlock(tdb, LIST_LOCK_BASE + 4*list, LOCK_SET, 
-			       F_WRLCK, F_SETLKW) != 0) {
-			return -1;
-		}
-	}
-	tdb->locked[list+1]++;
-	return 0;
-}
-
-/* unlock the database. */
-static int tdb_unlock(TDB_CONTEXT *tdb, int list)
-{
-	if (list < -1 || list >= (int)tdb->header.hash_size) {
-#if TDB_DEBUG
-		printf("bad unlock list %d\n", list);
-#endif
-		return -1;
-	}
-
-	if (tdb->locked[list+1] == 0) {
-#if TDB_DEBUG
-		printf("not locked %d\n", list);
-#endif
-		tdb->ecode = TDB_ERR_LOCK;
-		return -1;
-	}
-	if (tdb->locked[list+1] == 1) {
-		if (tdb_brlock(tdb, LIST_LOCK_BASE + 4*list, LOCK_CLEAR, 
-			       F_WRLCK, F_SETLKW) != 0) {
-			return -1;
-		}
-	}
-	tdb->locked[list+1]--;
-	return 0;
-}
-
-/* the hash algorithm - turn a key into an integer
-   This is based on the hash agorithm from gdbm */
-static unsigned tdb_hash(TDB_DATA *key)
-{
-	unsigned value;	/* Used to compute the hash value.  */
-	unsigned   i;	/* Used to cycle through random values. */
-
-	/* Set the initial value from the key size. */
-	value = 0x238F13AF * key->dsize;
-	for (i=0; i < key->dsize; i++) {
-		value = (value + (key->dptr[i] << (i*5 % 24)));
-	}
-
-	value = (1103515243 * value + 12345);  
-
-	return value;
-}
-
-/* find the top of the hash chain for an open database */
-static tdb_off tdb_hash_top(TDB_CONTEXT *tdb, unsigned hash)
-{
-	tdb_off ret;
-	hash = BUCKET(hash);
-	ret = FREELIST_TOP + (hash+1)*sizeof(tdb_off);
-	return ret;
-}
-
-
-/* check for an out of bounds access - if it is out of bounds then
-   see if the database has been expanded by someone else and expand
-   if necessary */
-static int tdb_oob(TDB_CONTEXT *tdb, tdb_off offset)
-{
-	struct stat st;
-	if ((offset <= tdb->map_size) || (tdb->fd == -1)) return 0;
-
-	fstat(tdb->fd, &st);
-	if (st.st_size <= (ssize_t)offset) {
-		tdb->ecode = TDB_ERR_IO;
-		return -1;
-	}
-
-#if HAVE_MMAP
-	if (tdb->map_ptr) {
-		munmap(tdb->map_ptr, tdb->map_size);
-		tdb->map_ptr = NULL;
-	}
-#endif
-
-	tdb->map_size = st.st_size;
-#if HAVE_MMAP
-	tdb->map_ptr = (void *)mmap(NULL, tdb->map_size, 
-				    tdb->read_only?PROT_READ:PROT_READ|PROT_WRITE,
-				    MAP_SHARED | MAP_FILE, tdb->fd, 0);
-#endif	
-	return 0;
-}
-
-
-/* write a lump of data at a specified offset */
-static int tdb_write(TDB_CONTEXT *tdb, tdb_off offset, const char *buf, tdb_len len)
-{
-	if (tdb_oob(tdb, offset + len) != 0) {
-		/* oops - trying to write beyond the end of the database! */
-		return -1;
-	}
-
-	if (tdb->map_ptr) {
-		memcpy(offset + (char *)tdb->map_ptr, buf, len);
-	} else {
-		if (lseek(tdb->fd, offset, SEEK_SET) != offset ||
-		    write(tdb->fd, buf, len) != (ssize_t)len) {
-			tdb->ecode = TDB_ERR_IO;
-			return -1;
-		}
-	}
-	return 0;
-}
-
-/* read a lump of data at a specified offset */
-static int tdb_read(TDB_CONTEXT *tdb, tdb_off offset, char *buf, tdb_len len)
-{
-	if (tdb_oob(tdb, offset + len) != 0) {
-		/* oops - trying to read beyond the end of the database! */
-		return -1;
-	}
-
-	if (tdb->map_ptr) {
-		memcpy(buf, offset + (char *)tdb->map_ptr, len);
-	} else {
-		if (lseek(tdb->fd, offset, SEEK_SET) != offset ||
-		    read(tdb->fd, buf, len) != (ssize_t)len) {
-			tdb->ecode = TDB_ERR_IO;
-			return -1;
-		}
-	}
-	return 0;
-}
-
-
-/* read a lump of data, allocating the space for it */
-static char *tdb_alloc_read(TDB_CONTEXT *tdb, tdb_off offset, tdb_len len)
-{
-	char *buf;
-
-	buf = (char *)malloc(len);
-
-	if (!buf) {
-		tdb->ecode = TDB_ERR_OOM;
-		return NULL;
-	}
-
-	if (tdb_read(tdb, offset, buf, len) == -1) {
-		free(buf);
-		return NULL;
-	}
-	
-	return buf;
-}
-
-/* convenience routine for writing a record */
-static int rec_write(TDB_CONTEXT *tdb, tdb_off offset, struct list_struct *rec)
-{
-	return tdb_write(tdb, offset, (char *)rec, sizeof(*rec));
-}
-
-/* convenience routine for writing a tdb_off */
-static int ofs_write(TDB_CONTEXT *tdb, tdb_off offset, tdb_off *d)
-{
-	return tdb_write(tdb, offset, (char *)d, sizeof(*d));
-}
-
-/* read a tdb_off from the store */
-static int ofs_read(TDB_CONTEXT *tdb, tdb_off offset, tdb_off *d)
-{
-	return tdb_read(tdb, offset, (char *)d, sizeof(*d));
-}
-
-/* read a record and check for simple errors */
-static int rec_read(TDB_CONTEXT *tdb, tdb_off offset, struct list_struct *rec)
-{
-	if (tdb_read(tdb, offset, (char *)rec, sizeof(*rec)) == -1) return -1;
-	if (rec->magic != TDB_MAGIC) {
-#if TDB_DEBUG
-		printf("bad magic 0x%08x at offset %d\n",
-		       rec->magic, offset);
-#endif
-		tdb->ecode = TDB_ERR_CORRUPT;
-		return -1;
-	}
-	if (tdb_oob(tdb, rec->next) != 0) {
-		return -1;
-	}
-	return 0;
-}
-
-/* expand the database at least length bytes by expanding the
-   underlying file and doing the mmap again if necessary */
-static int tdb_expand(TDB_CONTEXT *tdb, tdb_off length)
-{
-	struct list_struct rec;
-	tdb_off offset, ptr;
-	char b = 0;
-
-	tdb_lock(tdb,-1);
-
-	/* make sure we know about any previous expansions by another
-           process */
-	tdb_oob(tdb,tdb->map_size + 1);
-
-	/* always make room for at least 10 more records */
-	length *= TDB_LEN_MULTIPLIER;
-
-	/* and round the database up to a multiple of TDB_PAGE_SIZE */
-	length = ((tdb->map_size + length + TDB_PAGE_SIZE) & ~(TDB_PAGE_SIZE - 1)) - tdb->map_size;
-
-	/* expand the file itself */
-        if (tdb->fd != -1) {
-            lseek(tdb->fd, tdb->map_size + length - 1, SEEK_SET);
-            if (write(tdb->fd, &b, 1) != 1) goto fail;
-        }
-
-	/* form a new freelist record */
-	offset = FREELIST_TOP;
-	rec.rec_len = length - sizeof(rec);
-	rec.magic = TDB_FREE_MAGIC;
-	if (ofs_read(tdb, offset, &rec.next) == -1) {
-		goto fail;
-	}
-
-#if HAVE_MMAP
-	if (tdb->fd != -1 && tdb->map_ptr) {
-		munmap(tdb->map_ptr, tdb->map_size);
-		tdb->map_ptr = NULL;
-	}
-#endif
-
-	tdb->map_size += length;
-
-        if (tdb->fd == -1) {
-            tdb->map_ptr = realloc(tdb->map_ptr, tdb->map_size);
-        }
-
-	/* write it out */
-	if (rec_write(tdb, tdb->map_size - length, &rec) == -1) {
-		goto fail;
-	}
-
-	/* link it into the free list */
-	ptr = tdb->map_size - length;
-	if (ofs_write(tdb, offset, &ptr) == -1) goto fail;
-
-#if HAVE_MMAP
-        if (tdb->fd != -1) {
-            tdb->map_ptr = (void *)mmap(NULL, tdb->map_size, 
-                                        PROT_READ|PROT_WRITE,
-                                        MAP_SHARED | MAP_FILE, tdb->fd, 0);
-        }
-#endif
-
-	tdb_unlock(tdb, -1);
-	return 0;
-
- fail:
-	tdb_unlock(tdb,-1);
-	return -1;
-}
-
-/* allocate some space from the free list. The offset returned points
-   to a unconnected list_struct within the database with room for at
-   least length bytes of total data
-
-   0 is returned if the space could not be allocated
- */
-static tdb_off tdb_allocate(TDB_CONTEXT *tdb, tdb_len length)
-{
-	tdb_off offset, rec_ptr, last_ptr;
-	struct list_struct rec, lastrec, newrec;
-
-	tdb_lock(tdb, -1);
-
- again:
-	last_ptr = 0;
-	offset = FREELIST_TOP;
-
-	/* read in the freelist top */
-	if (ofs_read(tdb, offset, &rec_ptr) == -1) {
-		goto fail;
-	}
-
-	/* keep looking until we find a freelist record that is big
-           enough */
-	while (rec_ptr) {
-		if (tdb_read(tdb, rec_ptr, (char *)&rec, sizeof(rec)) == -1) {
-			goto fail;
-		}
-
-		if (rec.magic != TDB_FREE_MAGIC) {
-#if TDB_DEBUG
-			printf("bad magic 0x%08x in free list\n", rec.magic);
-#endif
-			goto fail;
-		}
-
-		if (rec.rec_len >= length) {
-			/* found it - now possibly split it up  */
-			if (rec.rec_len > length + MIN_REC_SIZE) {
-				length = (length + TDB_ALIGN) & ~(TDB_ALIGN-1);
-
-				newrec.rec_len = rec.rec_len - (sizeof(rec) + length);
-				newrec.next = rec.next;
-				newrec.magic = TDB_FREE_MAGIC;
-
-				rec.rec_len = length;
-				rec.next = rec_ptr + sizeof(rec) + rec.rec_len;
-				
-				if (rec_write(tdb, rec.next, &newrec) == -1) {
-					goto fail;
-				}
-
-				if (rec_write(tdb, rec_ptr, &rec) == -1) {
-					goto fail;
-				}
-			}
-
-			/* remove it from the list */
-			if (last_ptr == 0) {
-				offset = FREELIST_TOP;
-
-				if (ofs_write(tdb, offset, &rec.next) == -1) {
-					goto fail;
-				}				
-			} else {
-				lastrec.next = rec.next;
-				if (rec_write(tdb, last_ptr, &lastrec) == -1) {
-					goto fail;
-				}
-			}
-
-			/* all done - return the new record offset */
-			tdb_unlock(tdb, -1);
-			return rec_ptr;
-		}
-
-		/* move to the next record */
-		lastrec = rec;
-		last_ptr = rec_ptr;
-		rec_ptr = rec.next;
-	}
-
-	/* we didn't find enough space. See if we can expand the
-	   database and if we can then try again */
-	if (tdb_expand(tdb, length + sizeof(rec)) == 0) goto again;
-
- fail:
-#if TDB_DEBUG
-	printf("tdb_allocate failed for size %u\n", length);
-#endif
-	tdb_unlock(tdb, -1);
-	return 0;
-}
-
-/* initialise a new database with a specified hash size */
-static int tdb_new_database(TDB_CONTEXT *tdb, int hash_size)
-{
-	struct tdb_header header;
-	tdb_off offset;
-	int i, size = 0;
-	tdb_off buf[16];
-
-        /* create the header */
-        memset(&header, 0, sizeof(header));
-        memcpy(header.magic_food, TDB_MAGIC_FOOD, strlen(TDB_MAGIC_FOOD)+1);
-        header.version = TDB_VERSION;
-        header.hash_size = hash_size;
-        lseek(tdb->fd, 0, SEEK_SET);
-        ftruncate(tdb->fd, 0);
-        
-        if (tdb->fd != -1 && write(tdb->fd, &header, sizeof(header)) != 
-            sizeof(header)) {
-            tdb->ecode = TDB_ERR_IO;
-            return -1;
-        } else size += sizeof(header);
-	
-        /* the freelist and hash pointers */
-        offset = 0;
-        memset(buf, 0, sizeof(buf));
-
-        for (i=0;(hash_size+1)-i >= 16; i += 16) {
-            if (tdb->fd != -1 && write(tdb->fd, buf, sizeof(buf)) != 
-                sizeof(buf)) {
-                tdb->ecode = TDB_ERR_IO;
-                return -1;
-            } else size += sizeof(buf);
-        }
-
-        for (;i<hash_size+1; i++) {
-            if (tdb->fd != -1 && write(tdb->fd, buf, sizeof(tdb_off)) != 
-                sizeof(tdb_off)) {
-                tdb->ecode = TDB_ERR_IO;
-                return -1;
-            } else size += sizeof(tdb_off);
-        }
-
-        if (tdb->fd == -1) {
-            tdb->map_ptr = calloc(size, 1);
-            tdb->map_size = size;
-            if (tdb->map_ptr == NULL) {
-                tdb->ecode = TDB_ERR_IO;
-                return -1;
-            }
-            memcpy(&tdb->header, &header, sizeof(header));
-        }
-
-#if TDB_DEBUG
-	printf("initialised database of hash_size %u\n", 
-	       hash_size);
-#endif
-	return 0;
-}
-
-/* Returns 0 on fail.  On success, return offset of record, and fills
-   in rec */
-static tdb_off tdb_find(TDB_CONTEXT *tdb, TDB_DATA key, unsigned int hash,
-			struct list_struct *rec)
-{
-	tdb_off offset, rec_ptr;
-	
-	/* find the top of the hash chain */
-	offset = tdb_hash_top(tdb, hash);
-
-	/* read in the hash top */
-	if (ofs_read(tdb, offset, &rec_ptr) == -1)
-		return 0;
-
-	/* keep looking until we find the right record */
-	while (rec_ptr) {
-		if (rec_read(tdb, rec_ptr, rec) == -1)
-			return 0;
-
-		if (hash == rec->full_hash && key.dsize == rec->key_len) {
-			char *k;
-			/* a very likely hit - read the key */
-			k = tdb_alloc_read(tdb, rec_ptr + sizeof(*rec), 
-					   rec->key_len);
-
-			if (!k)
-				return 0;
-
-			if (memcmp(key.dptr, k, key.dsize) == 0) {
-				free(k);
-				return rec_ptr;
-			}
-			free(k);
-		}
-
-		/* move to the next record */
-		rec_ptr = rec->next;
-	}
-	return 0;
-}
-
-/* 
-   return an error string for the last tdb error
-*/
-char *tdb_error(TDB_CONTEXT *tdb)
-{
-	int i;
-	static struct {
-		enum TDB_ERROR ecode;
-		char *estring;
-	} emap[] = {
-		{TDB_SUCCESS, "Success"},
-		{TDB_ERR_CORRUPT, "Corrupt database"},
-		{TDB_ERR_IO, "IO Error"},
-		{TDB_ERR_LOCK, "Locking error"},
-		{TDB_ERR_OOM, "Out of memory"},
-		{TDB_ERR_EXISTS, "Record exists"},
-		{-1, NULL}};
-        if (tdb != NULL) {
-            for (i=0;emap[i].estring;i++) {
-		if (tdb->ecode == emap[i].ecode) return emap[i].estring;
-            }
-        } else {
-            return "Invalid tdb context";
-        }
-	return "Invalid error code";
-}
-
-
-/* update an entry in place - this only works if the new data size
-   is <= the old data size and the key exists.
-   on failure return -1
-*/
-int tdb_update(TDB_CONTEXT *tdb, TDB_DATA key, TDB_DATA dbuf)
-{
-	unsigned hash;
-	struct list_struct rec;
-	tdb_off rec_ptr;
-	int ret = -1;
-
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_update() called with null context\n");
-#endif
-            return -1;
-        }
-
-	/* find which hash bucket it is in */
-	hash = tdb_hash(&key);
-
-	tdb_lock(tdb, BUCKET(hash));
-	rec_ptr = tdb_find(tdb, key, hash, &rec);
-
-	if (!rec_ptr)
-		goto out;
-
-	/* must be long enough */
-	if (rec.rec_len < key.dsize + dbuf.dsize)
-		goto out;
-
-	if (tdb_write(tdb, rec_ptr + sizeof(rec) + rec.key_len,
-		      dbuf.dptr, dbuf.dsize) == -1)
-		goto out;
-
-	if (dbuf.dsize != rec.data_len) {
-		/* update size */
-		rec.data_len = dbuf.dsize;
-		ret = rec_write(tdb, rec_ptr, &rec);
-	} else
-		ret = 0;
-
- out:
-	tdb_unlock(tdb, BUCKET(hash));
-	return ret;
-}
-
-/* find an entry in the database given a key */
-TDB_DATA tdb_fetch(TDB_CONTEXT *tdb, TDB_DATA key)
-{
-	unsigned hash;
-	tdb_off rec_ptr;
-	struct list_struct rec;
-	TDB_DATA ret = null_data;
-
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_fetch() called with null context\n");
-#endif
-            return null_data;
-        }
-
-	/* find which hash bucket it is in */
-	hash = tdb_hash(&key);
-
-	tdb_lock(tdb, BUCKET(hash));
-	rec_ptr = tdb_find(tdb, key, hash, &rec);
-
-	if (rec_ptr) {
-		ret.dptr = tdb_alloc_read(tdb,
-					  rec_ptr + sizeof(rec) + rec.key_len,
-					  rec.data_len);
-		ret.dsize = rec.data_len;
-	}
-	
-	tdb_unlock(tdb, BUCKET(hash));
-	return ret;
-}
-
-/* check if an entry in the database exists 
-
-   note that 1 is returned if the key is found and 0 is returned if not found
-   this doesn't match the conventions in the rest of this module, but is
-   compatible with gdbm
-*/
-int tdb_exists(TDB_CONTEXT *tdb, TDB_DATA key)
-{
-	unsigned hash;
-	tdb_off rec_ptr;
-	struct list_struct rec;
-	
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_exists() called with null context\n");
-#endif
-            return 0;
-        }
-
-	/* find which hash bucket it is in */
-	hash = tdb_hash(&key);
-
-	tdb_lock(tdb, BUCKET(hash));
-	rec_ptr = tdb_find(tdb, key, hash, &rec);
-	tdb_unlock(tdb, BUCKET(hash));
-
-	return rec_ptr != 0;
-}
-
-/* traverse the entire database - calling fn(tdb, key, data) on each element.
-   return -1 on error or the record count traversed
-   if fn is NULL then it is not called
-   a non-zero return value from fn() indicates that the traversal should stop
-  */
-int tdb_traverse(TDB_CONTEXT *tdb, int (*fn)(TDB_CONTEXT *tdb, TDB_DATA key, TDB_DATA dbuf, void* state), void* state)
-{
-	int count = 0;
-	unsigned h;
-	tdb_off offset, rec_ptr;
-	struct list_struct rec;
-	char *data;
-	TDB_DATA key, dbuf;
-
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_traverse() called with null context\n");
-#endif
-            return -1;
-        }
-
-	/* loop over all hash chains */
-	for (h = 0; h < tdb->header.hash_size; h++) {
-		tdb_lock(tdb, BUCKET(h));
-
-		/* read in the hash top */
-		offset = tdb_hash_top(tdb, h);
-		if (ofs_read(tdb, offset, &rec_ptr) == -1) {
-			goto fail;
-		}
-
-		/* traverse all records for this hash */
-		while (rec_ptr) {
-			if (rec_read(tdb, rec_ptr, &rec) == -1) {
-				goto fail;
-			}
-
-			/* now read the full record */
-			data = tdb_alloc_read(tdb, rec_ptr + sizeof(rec), 
-					     rec.key_len + rec.data_len);
-			if (!data) {
-				goto fail;
-			}
-
-			key.dptr = data;
-			key.dsize = rec.key_len;
-			dbuf.dptr = data + rec.key_len;
-			dbuf.dsize = rec.data_len;
-			count++;
-
-			if (fn && fn(tdb, key, dbuf, state) != 0) {
-				/* they want us to stop traversing */
-				free(data);
-				tdb_unlock(tdb, BUCKET(h));
-				return count;
-			}
-
-			/* a miss - drat */
-			free(data);
-
-			/* move to the next record */
-			rec_ptr = rec.next;
-		}
-		tdb_unlock(tdb, BUCKET(h));
-	}
-
-	/* return the number traversed */
-	return count;
-
- fail:
-	tdb_unlock(tdb, BUCKET(h));
-	return -1;
-}
-
-
-/* find the first entry in the database and return its key */
-TDB_DATA tdb_firstkey(TDB_CONTEXT *tdb)
-{
-	tdb_off offset, rec_ptr;
-	struct list_struct rec;
-	unsigned hash;
-	TDB_DATA ret;
-
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_firstkey() called with null context\n");
-#endif
-            return null_data;
-        }
-
-	/* look for a non-empty hash chain */
-	for (hash = 0, rec_ptr = 0; 
-	     hash < tdb->header.hash_size;
-	     hash++) {
-		/* find the top of the hash chain */
-		offset = tdb_hash_top(tdb, hash);
-
-		tdb_lock(tdb, BUCKET(hash));
-
-		/* read in the hash top */
-		if (ofs_read(tdb, offset, &rec_ptr) == -1) {
-			goto fail;
-		}
-
-		if (rec_ptr) break;
-
-		tdb_unlock(tdb, BUCKET(hash));
-	}
-
-	if (rec_ptr == 0) return null_data;
-
-	/* we've found a non-empty chain, now read the record */
-	if (rec_read(tdb, rec_ptr, &rec) == -1) {
-		goto fail;
-	}
-
-	/* allocate and read the key space */
-	ret.dptr = tdb_alloc_read(tdb, rec_ptr + sizeof(rec), rec.key_len);
-	ret.dsize = rec.key_len;
-	tdb_unlock(tdb, BUCKET(hash));
-	return ret;
-
- fail:
-	tdb_unlock(tdb, BUCKET(hash));
-	return null_data;
-}
-
-/* find the next entry in the database, returning its key */
-TDB_DATA tdb_nextkey(TDB_CONTEXT *tdb, TDB_DATA key)
-{
-	unsigned hash, hbucket;
-	tdb_off rec_ptr, offset;
-	struct list_struct rec;
-	TDB_DATA ret;
-
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_nextkey() called with null context\n");
-#endif
-            return null_data;
-        }
-
-	/* find which hash bucket it is in */
-	hash = tdb_hash(&key);
-	hbucket = BUCKET(hash);
-	
-	tdb_lock(tdb, hbucket);
-	rec_ptr = tdb_find(tdb, key, hash, &rec);
-	if (rec_ptr) {
-		/* we want the next record after this one */
-		rec_ptr = rec.next;
-	}
-
-	/* not found or last in hash: look for next non-empty hash chain */
-	while (rec_ptr == 0) {
-		tdb_unlock(tdb, hbucket);
-
-		if (++hbucket >= tdb->header.hash_size - 1)
-			return null_data;
-
-		offset = tdb_hash_top(tdb, hbucket);
-		tdb_lock(tdb, hbucket);
-		/* read in the hash top */
-		if (ofs_read(tdb, offset, &rec_ptr) == -1) {
-			tdb_unlock(tdb, hbucket);
-			return null_data;
-		}
-	}
-
-	/* Read the record. */
-	if (rec_read(tdb, rec_ptr, &rec) == -1) {
-		tdb_unlock(tdb, hbucket);
-		return null_data;
-	}
-	/* allocate and read the key */
-	ret.dptr = tdb_alloc_read(tdb, rec_ptr + sizeof(rec), rec.key_len);
-	ret.dsize = rec.key_len;
-	tdb_unlock(tdb, hbucket);
-
-	return ret;
-}
-
-/* delete an entry in the database given a key */
-int tdb_delete(TDB_CONTEXT *tdb, TDB_DATA key)
-{
-	unsigned hash;
-	tdb_off offset, rec_ptr, last_ptr;
-	struct list_struct rec, lastrec;
-	char *data = NULL;
-
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_delete() called with null context\n");
-#endif
-            return -1;
-        }
-
-	/* find which hash bucket it is in */
-	hash = tdb_hash(&key);
-
-	tdb_lock(tdb, BUCKET(hash));
-
-	/* find the top of the hash chain */
-	offset = tdb_hash_top(tdb, hash);
-
-	/* read in the hash top */
-	if (ofs_read(tdb, offset, &rec_ptr) == -1) {
-		goto fail;
-	}
-
-	last_ptr = 0;
-
-	/* keep looking until we find the right record */
-	while (rec_ptr) {
-		if (rec_read(tdb, rec_ptr, &rec) == -1) {
-			goto fail;
-		}
-
-		if (hash == rec.full_hash && key.dsize == rec.key_len) {
-			/* a very likely hit - read the record and full key */
-			data = tdb_alloc_read(tdb, rec_ptr + sizeof(rec), 
-					     rec.key_len);
-			if (!data) {
-				goto fail;
-			}
-
-			if (memcmp(key.dptr, data, key.dsize) == 0) {
-				/* a definite match - delete it */
-				if (last_ptr == 0) {
-					offset = tdb_hash_top(tdb, hash);
-					if (ofs_write(tdb, offset, &rec.next) == -1) {
-						goto fail;
-					}
-				} else {
-					lastrec.next = rec.next;
-					if (rec_write(tdb, last_ptr, &lastrec) == -1) {
-						goto fail;
-					}					
-				}
-				tdb_unlock(tdb, BUCKET(hash));
-				tdb_lock(tdb, -1);
-				/* and recover the space */
-				offset = FREELIST_TOP;
-				if (ofs_read(tdb, offset, &rec.next) == -1) {
-					goto fail2;
-				}
-				rec.magic = TDB_FREE_MAGIC;
-				if (rec_write(tdb, rec_ptr, &rec) == -1) {
-					goto fail2;
-				}
-				if (ofs_write(tdb, offset, &rec_ptr) == -1) {
-					goto fail2;
-				}
-
-				/* yipee - all done */
-				free(data);
-				tdb_unlock(tdb, -1);
-				return 0;
-			}
-
-			/* a miss - drat */
-			free(data);
-			data = NULL;
-		}
-
-		/* move to the next record */
-		last_ptr = rec_ptr;
-		lastrec = rec;
-		rec_ptr = rec.next;
-	}
-
- fail:
-	if (data) free(data);
-	tdb_unlock(tdb, BUCKET(hash));
-	return -1;
-
- fail2:
-	if (data) free(data);
-	tdb_unlock(tdb, -1);
-	return -1;
-}
-
-
-/* store an element in the database, replacing any existing element
-   with the same key 
-
-   return 0 on success, -1 on failure
-*/
-int tdb_store(TDB_CONTEXT *tdb, TDB_DATA key, TDB_DATA dbuf, int flag)
-{
-	struct list_struct rec;
-	unsigned hash;
-	tdb_off rec_ptr, offset;
-	char *p = NULL;
-
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_store() called with null context\n");
-#endif
-            return -1;
-        }
-
-	/* find which hash bucket it is in */
-	hash = tdb_hash(&key);
-
-	/* check for it existing */
-	if (flag == TDB_INSERT && tdb_exists(tdb, key)) {
-		tdb->ecode = TDB_ERR_EXISTS;
-		return -1;
-	}
-
-	/* first try in-place update */
-	if (flag != TDB_INSERT && tdb_update(tdb, key, dbuf) == 0) {
-		return 0;
-	}
-
-	rec_ptr = tdb_allocate(tdb, key.dsize + dbuf.dsize);
-	if (rec_ptr == 0) {
-		return -1;
-	}
-
-	tdb_lock(tdb, BUCKET(hash));
-
-	/* delete any existing record - if it doesn't exist we don't care */
-	if (flag != TDB_INSERT) {
-		tdb_delete(tdb, key);
-	}
-
-	/* read the newly created record */
-	if (tdb_read(tdb, rec_ptr, (char *)&rec, sizeof(rec)) == -1) {
-		goto fail;
-	}
-
-	if (rec.magic != TDB_FREE_MAGIC) goto fail;
-
-	/* find the top of the hash chain */
-	offset = tdb_hash_top(tdb, hash);
-
-	/* read in the hash top diretcly into our next pointer */
-	if (ofs_read(tdb, offset, &rec.next) == -1) {
-		goto fail;
-	}
-
-	rec.key_len = key.dsize;
-	rec.data_len = dbuf.dsize;
-	rec.full_hash = hash;
-	rec.magic = TDB_MAGIC;
-
-	p = (char *)malloc(sizeof(rec) + key.dsize + dbuf.dsize);
-	if (!p) {
-		tdb->ecode = TDB_ERR_OOM;
-		goto fail;
-	}
-
-	memcpy(p, &rec, sizeof(rec));
-	memcpy(p+sizeof(rec), key.dptr, key.dsize);
-	memcpy(p+sizeof(rec)+key.dsize, dbuf.dptr, dbuf.dsize);
-
-	if (tdb_write(tdb, rec_ptr, p, sizeof(rec)+key.dsize+dbuf.dsize) == -1)
-		goto fail;
-
-	free(p); 
-	p = NULL;
-
-	/* and point the top of the hash chain at it */
-	if (ofs_write(tdb, offset, &rec_ptr) == -1) goto fail;
-
-	tdb_unlock(tdb, BUCKET(hash));
-	return 0;
-
- fail:
-#if TDB_DEBUG
-	printf("store failed for hash 0x%08x in bucket %u\n", hash, BUCKET(hash));
-#endif
-	if (p) free(p);
-	tdb_unlock(tdb, BUCKET(hash));
-	return -1;
-}
-
-
-/* open the database, creating it if necessary 
-
-   The open_flags and mode are passed straight to the open call on the database
-   file. A flags value of O_WRONLY is invalid
-
-   The hash size is advisory, use zero for a default value. 
-
-   return is NULL on error
-*/
-TDB_CONTEXT *tdb_open(char *name, int hash_size, int tdb_flags,
-		      int open_flags, mode_t mode)
-{
-	TDB_CONTEXT tdb, *ret;
-	struct stat st;
-
-	memset(&tdb, 0, sizeof(tdb));
-
-	tdb.fd = -1;
-	tdb.name = NULL;
-	tdb.map_ptr = NULL;
-
-	if ((open_flags & O_ACCMODE) == O_WRONLY) {
-		goto fail;
-	}
-
-	if (hash_size == 0) hash_size = DEFAULT_HASH_SIZE;
-
-	tdb.read_only = ((open_flags & O_ACCMODE) == O_RDONLY);
-
-        if (name != NULL) {
-            tdb.fd = open(name, open_flags, mode);
-            if (tdb.fd == -1) {
-		goto fail;
-            }
-        }
-
-	/* ensure there is only one process initialising at once */
-	tdb_brlock(&tdb, GLOBAL_LOCK, LOCK_SET, F_WRLCK, F_SETLKW);
-	
-	if (tdb_flags & TDB_CLEAR_IF_FIRST) {
-		/* we need to zero the database if we are the only
-		   one with it open */
-		if (tdb_brlock(&tdb, ACTIVE_LOCK, LOCK_SET, F_WRLCK, F_SETLK) == 0) {
-			ftruncate(tdb.fd, 0);
-			tdb_brlock(&tdb, ACTIVE_LOCK, LOCK_CLEAR, F_WRLCK, F_SETLK);
-		}
-	}
-
-	/* leave this lock in place */
-	tdb_brlock(&tdb, ACTIVE_LOCK, LOCK_SET, F_RDLCK, F_SETLKW);
-
-	if (read(tdb.fd, &tdb.header, sizeof(tdb.header)) != sizeof(tdb.header) ||
-	    strcmp(tdb.header.magic_food, TDB_MAGIC_FOOD) != 0 ||
-	    tdb.header.version != TDB_VERSION) {
-		/* its not a valid database - possibly initialise it */
-		if (!(open_flags & O_CREAT)) {
-			goto fail;
-		}
-		if (tdb_new_database(&tdb, hash_size) == -1) goto fail;
-
-		lseek(tdb.fd, 0, SEEK_SET);
-		if (tdb.fd != -1 && read(tdb.fd, &tdb.header, 
-                                         sizeof(tdb.header)) != 
-                                         sizeof(tdb.header)) 
-                    goto fail;
-	}
-
-        if (tdb.fd != -1) {
-            fstat(tdb.fd, &st);
-
-            /* map the database and fill in the return structure */
-            tdb.name = (char *)strdup(name);
-            tdb.map_size = st.st_size;
-        }
-
-        tdb.locked = (int *)calloc(tdb.header.hash_size+1, 
-                                   sizeof(tdb.locked[0]));
-        if (!tdb.locked) {
-            goto fail;
-        }
-
-#if HAVE_MMAP
-        if (tdb.fd != -1) {
-            tdb.map_ptr = (void *)mmap(NULL, st.st_size, 
-                                       tdb.read_only? PROT_READ : PROT_READ|PROT_WRITE,
-                                       MAP_SHARED | MAP_FILE, tdb.fd, 0);
-        }
-#endif
-
-	ret = (TDB_CONTEXT *)malloc(sizeof(tdb));
-	if (!ret) goto fail;
-
-	*ret = tdb;
-
-#if TDB_DEBUG
-	printf("mapped database of hash_size %u map_size=%u\n", 
-	       hash_size, tdb.map_size);
-#endif
-
-	tdb_brlock(&tdb, GLOBAL_LOCK, LOCK_CLEAR, F_WRLCK, F_SETLKW);
-	return ret;
-
- fail:
-        if (tdb.name) free(tdb.name);
-	if (tdb.fd != -1) close(tdb.fd);
-	if (tdb.map_ptr) munmap(tdb.map_ptr, tdb.map_size);
-
-	return NULL;
-}
-
-/* close a database */
-int tdb_close(TDB_CONTEXT *tdb)
-{
-	if (!tdb) return -1;
-
-	if (tdb->name) free(tdb->name);
-	if (tdb->fd != -1) close(tdb->fd);
-	if (tdb->locked) free(tdb->locked);
-
-	if (tdb->map_ptr) {
-            if (tdb->fd != -1) {
-                munmap(tdb->map_ptr, tdb->map_size);
-            } else {
-                free(tdb->map_ptr);
-            }
-        }
-
-	memset(tdb, 0, sizeof(*tdb));
-	free(tdb);
-
-	return 0;
-}
-
-/* lock the database. If we already have it locked then don't do anything */
-int tdb_writelock(TDB_CONTEXT *tdb)
-{
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_writelock() called with null context\n");
-#endif
-            return -1;
-        }
-
-	return tdb_lock(tdb, -1);
-}
-
-/* unlock the database. */
-int tdb_writeunlock(TDB_CONTEXT *tdb)
-{
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_writeunlock() called with null context\n");
-#endif
-            return -1;
-        }
-
-	return tdb_unlock(tdb, -1);
-}
-
-/* lock one hash chain. This is meant to be used to reduce locking
-   contention - it cannot guarantee how many records will be locked */
-int tdb_lockchain(TDB_CONTEXT *tdb, TDB_DATA key)
-{
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_lockchain() called with null context\n");
-#endif
-            return -1;
-        }
-
-	return tdb_lock(tdb, BUCKET(tdb_hash(&key)));
-}
-
-
-/* unlock one hash chain */
-int tdb_unlockchain(TDB_CONTEXT *tdb, TDB_DATA key)
-{
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_unlockchain() called with null context\n");
-#endif
-            return -1;
-        }
-
-	return tdb_unlock(tdb, BUCKET(tdb_hash(&key)));
-}
diff --git a/mdk-stage1/ppp/pppd/tdb.h b/mdk-stage1/ppp/pppd/tdb.h
deleted file mode 100644
index 56ae0ac2a..000000000
--- a/mdk-stage1/ppp/pppd/tdb.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#define STANDALONE	1
-/* 
- * Database functions
- * Copyright (C) Andrew Tridgell 1999
- * 
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms AND provided that this software or
- * any derived work is only used as part of the PPP daemon (pppd)
- * and related utilities.
- * The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Note: this software is also available under the Gnu Public License
- * version 2 or later.
- */
-
-typedef unsigned tdb_len;
-typedef unsigned tdb_off;
-
-#define TDB_MAGIC_FOOD "TDB file\n"
-
-/* this is stored at the front of every database */
-struct tdb_header {
-	char magic_food[32]; /* for /etc/magic */
-	unsigned version; /* version of the code */
-	unsigned hash_size; /* number of hash entries */
-};
-
-typedef struct {
-	char *dptr;
-	size_t dsize;
-} TDB_DATA;
-
-/* this is the context structure that is returned from a db open */
-typedef struct {
-	char *name; /* the name of the database */
-	void *map_ptr; /* where it is currently mapped */
-	int fd; /* open file descriptor for the database */
-	tdb_len map_size; /* how much space has been mapped */
-	int read_only; /* opened read-only */
-	int *locked; /* set if we have a chain locked */
-	int ecode; /* error code for last tdb error */
-	struct tdb_header header; /* a cached copy of the header */
-} TDB_CONTEXT;
-
-/* flags to tdb_store() */
-#define TDB_REPLACE 1
-#define TDB_INSERT 2
-
-/* flags for tdb_open() */
-#define TDB_CLEAR_IF_FIRST 1
-
-/* error codes */
-enum TDB_ERROR {TDB_SUCCESS=0, TDB_ERR_CORRUPT, TDB_ERR_IO, TDB_ERR_LOCK, 
-		TDB_ERR_OOM, TDB_ERR_EXISTS};
-
-#if STANDALONE
-TDB_CONTEXT *tdb_open(char *name, int hash_size, int tdb_flags,
-		      int open_flags, mode_t mode);
-char *tdb_error(TDB_CONTEXT *tdb);
-int tdb_writelock(TDB_CONTEXT *tdb);
-int tdb_writeunlock(TDB_CONTEXT *tdb);
-TDB_DATA tdb_fetch(TDB_CONTEXT *tdb, TDB_DATA key);
-int tdb_delete(TDB_CONTEXT *tdb, TDB_DATA key);
-int tdb_store(TDB_CONTEXT *tdb, TDB_DATA key, TDB_DATA dbuf, int flag);
-int tdb_close(TDB_CONTEXT *tdb);
-TDB_DATA tdb_firstkey(TDB_CONTEXT *tdb);
-TDB_DATA tdb_nextkey(TDB_CONTEXT *tdb, TDB_DATA key);
-int tdb_traverse(TDB_CONTEXT *tdb, 
-	int (*fn)(TDB_CONTEXT *tdb, TDB_DATA key, TDB_DATA dbuf, void *state),
-	void *state);
-int tdb_exists(TDB_CONTEXT *tdb, TDB_DATA key);
-#endif
diff --git a/mdk-stage1/ppp/pppd/tty.c b/mdk-stage1/ppp/pppd/tty.c
deleted file mode 100644
index 4db707968..000000000
--- a/mdk-stage1/ppp/pppd/tty.c
+++ /dev/null
@@ -1,1164 +0,0 @@
-/*
- * tty.c - code for handling serial ports in pppd.
- *
- * Copyright (C) 2000 Paul Mackerras.
- * All rights reserved.
- *
- * Portions Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdio.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <signal.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <syslog.h>
-#include <netdb.h>
-#include <utmp.h>
-#include <pwd.h>
-#include <setjmp.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "lcp.h"
-
-void tty_process_extra_options __P((void));
-void tty_check_options __P((void));
-int  connect_tty __P((void));
-void disconnect_tty __P((void));
-void tty_close_fds __P((void));
-void cleanup_tty __P((void));
-void tty_do_send_config __P((int, u_int32_t, int, int));
-
-static int setdevname __P((char *, char **, int));
-static int setspeed __P((char *, char **, int));
-static int setxonxoff __P((char **));
-static int setescape __P((char **));
-static void printescape __P((option_t *, void (*)(void *, char *,...),void *));
-static void finish_tty __P((void));
-static int start_charshunt __P((int, int));
-static void stop_charshunt __P((void *, int));
-static void charshunt_done __P((void *));
-static void charshunt __P((int, int, char *));
-static int record_write __P((FILE *, int code, u_char *buf, int nb,
-			     struct timeval *));
-static int open_socket __P((char *));
-static void maybe_relock __P((void *, int));
-
-static int pty_master;		/* fd for master side of pty */
-static int pty_slave;		/* fd for slave side of pty */
-static int real_ttyfd;		/* fd for actual serial port (not pty) */
-static int ttyfd;		/* Serial port file descriptor */
-static char speed_str[16];	/* Serial port speed as string */
-
-mode_t tty_mode = (mode_t)-1;	/* Original access permissions to tty */
-int baud_rate;			/* Actual bits/second for serial device */
-char *callback_script;		/* script for doing callback */
-int charshunt_pid;		/* Process ID for charshunt */
-int locked;			/* lock() has succeeded */
-struct stat devstat;		/* result of stat() on devnam */
-
-/* option variables */
-int	crtscts = 0;		/* Use hardware flow control */
-bool	modem = 1;		/* Use modem control lines */
-int	inspeed = 0;		/* Input/Output speed requested */
-bool	lockflag = 0;		/* Create lock file to lock the serial dev */
-char	*initializer = NULL;	/* Script to initialize physical link */
-char	*connect_script = NULL;	/* Script to establish physical link */
-char	*disconnect_script = NULL; /* Script to disestablish physical link */
-char	*welcomer = NULL;	/* Script to run after phys link estab. */
-char	*ptycommand = NULL;	/* Command to run on other side of pty */
-bool	notty = 0;		/* Stdin/out is not a tty */
-char	*record_file = NULL;	/* File to record chars sent/received */
-int	max_data_rate;		/* max bytes/sec through charshunt */
-bool	sync_serial = 0;	/* Device is synchronous serial device */
-char	*pty_socket = NULL;	/* Socket to connect to pty */
-int	using_pty = 0;		/* we're allocating a pty as the device */
-
-extern uid_t uid;
-extern int kill_link;
-
-/* XXX */
-extern int privopen;		/* don't lock, open device as root */
-
-u_int32_t xmit_accm[8];		/* extended transmit ACCM */
-
-/* option descriptors */
-option_t tty_options[] = {
-    /* device name must be first, or change connect_tty() below! */
-    { "device name", o_wild, (void *) &setdevname,
-      "Serial port device name",
-      OPT_DEVNAM | OPT_PRIVFIX | OPT_NOARG  | OPT_A2STRVAL | OPT_STATIC,
-      devnam},
-
-    { "tty speed", o_wild, (void *) &setspeed,
-      "Baud rate for serial port",
-      OPT_PRIO | OPT_NOARG | OPT_A2STRVAL | OPT_STATIC, speed_str },
-
-    { "lock", o_bool, &lockflag,
-      "Lock serial device with UUCP-style lock file", OPT_PRIO | 1 },
-    { "nolock", o_bool, &lockflag,
-      "Don't lock serial device", OPT_PRIOSUB | OPT_PRIV },
-
-    { "init", o_string, &initializer,
-      "A program to initialize the device", OPT_PRIO | OPT_PRIVFIX },
-
-    { "connect", o_string, &connect_script,
-      "A program to set up a connection", OPT_PRIO | OPT_PRIVFIX },
-
-    { "disconnect", o_string, &disconnect_script,
-      "Program to disconnect serial device", OPT_PRIO | OPT_PRIVFIX },
-
-    { "welcome", o_string, &welcomer,
-      "Script to welcome client", OPT_PRIO | OPT_PRIVFIX },
-
-    { "pty", o_string, &ptycommand,
-      "Script to run on pseudo-tty master side",
-      OPT_PRIO | OPT_PRIVFIX | OPT_DEVNAM },
-
-    { "notty", o_bool, &notty,
-      "Input/output is not a tty", OPT_DEVNAM | 1 },
-
-    { "socket", o_string, &pty_socket,
-      "Send and receive over socket, arg is host:port",
-      OPT_PRIO | OPT_DEVNAM },
-
-    { "record", o_string, &record_file,
-      "Record characters sent/received to file", OPT_PRIO },
-
-    { "crtscts", o_int, &crtscts,
-      "Set hardware (RTS/CTS) flow control",
-      OPT_PRIO | OPT_NOARG | OPT_VAL(1) },
-    { "cdtrcts", o_int, &crtscts,
-      "Set alternate hardware (DTR/CTS) flow control",
-      OPT_PRIOSUB | OPT_NOARG | OPT_VAL(2) },
-    { "nocrtscts", o_int, &crtscts,
-      "Disable hardware flow control",
-      OPT_PRIOSUB | OPT_NOARG | OPT_VAL(-1) },
-    { "-crtscts", o_int, &crtscts,
-      "Disable hardware flow control",
-      OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) },
-    { "nocdtrcts", o_int, &crtscts,
-      "Disable hardware flow control",
-      OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) },
-    { "xonxoff", o_special_noarg, (void *)setxonxoff,
-      "Set software (XON/XOFF) flow control", OPT_PRIOSUB },
-
-    { "modem", o_bool, &modem,
-      "Use modem control lines", OPT_PRIO | 1 },
-    { "local", o_bool, &modem,
-      "Don't use modem control lines", OPT_PRIOSUB | 0 },
-
-    { "sync", o_bool, &sync_serial,
-      "Use synchronous HDLC serial encoding", 1 },
-
-    { "datarate", o_int, &max_data_rate,
-      "Maximum data rate in bytes/sec (with pty, notty or record option)",
-      OPT_PRIO },
-
-    { "escape", o_special, (void *)setescape,
-      "List of character codes to escape on transmission",
-      OPT_A2PRINTER, (void *)printescape },
-
-    { NULL }
-};
-
-
-struct channel tty_channel = {
-	tty_options,
-	&tty_process_extra_options,
-	&tty_check_options,
-	&connect_tty,
-	&disconnect_tty,
-	&tty_establish_ppp,
-	&tty_disestablish_ppp,
-	&tty_do_send_config,
-	&tty_recv_config,
-	&cleanup_tty,
-	&tty_close_fds
-};
-
-/*
- * setspeed - Set the serial port baud rate.
- * If doit is 0, the call is to check whether this option is
- * potentially a speed value.
- */
-static int
-setspeed(arg, argv, doit)
-    char *arg;
-    char **argv;
-    int doit;
-{
-	char *ptr;
-	int spd;
-
-	spd = strtol(arg, &ptr, 0);
-	if (ptr == arg || *ptr != 0 || spd == 0)
-		return 0;
-	if (doit) {
-		inspeed = spd;
-		slprintf(speed_str, sizeof(speed_str), "%d", spd);
-	}
-	return 1;
-}
-
-
-/*
- * setdevname - Set the device name.
- * If doit is 0, the call is to check whether this option is
- * potentially a device name.
- */
-static int
-setdevname(cp, argv, doit)
-    char *cp;
-    char **argv;
-    int doit;
-{
-	struct stat statbuf;
-	char dev[MAXPATHLEN];
-
-	if (*cp == 0)
-		return 0;
-
-	if (strncmp("/dev/", cp, 5) != 0) {
-		strlcpy(dev, "/dev/", sizeof(dev));
-		strlcat(dev, cp, sizeof(dev));
-		cp = dev;
-	}
-
-	/*
-	 * Check if there is a character device by this name.
-	 */
-	if (stat(cp, &statbuf) < 0) {
-		if (!doit)
-			return errno != ENOENT;
-		option_error("Couldn't stat %s: %m", cp);
-		return 0;
-	}
-	if (!S_ISCHR(statbuf.st_mode)) {
-		if (doit)
-			option_error("%s is not a character device", cp);
-		return 0;
-	}
-
-	if (doit) {
-		strlcpy(devnam, cp, sizeof(devnam));
-		devstat = statbuf;
-		default_device = 0;
-	}
-  
-	return 1;
-}
-
-static int
-setxonxoff(argv)
-    char **argv;
-{
-	lcp_wantoptions[0].asyncmap |= 0x000A0000;	/* escape ^S and ^Q */
-	lcp_wantoptions[0].neg_asyncmap = 1;
-
-	crtscts = -2;
-	return 1;
-}
-
-/*
- * setescape - add chars to the set we escape on transmission.
- */
-static int
-setescape(argv)
-    char **argv;
-{
-    int n, ret;
-    char *p, *endp;
-
-    p = *argv;
-    ret = 1;
-    while (*p) {
-	n = strtol(p, &endp, 16);
-	if (p == endp) {
-	    option_error("escape parameter contains invalid hex number '%s'",
-			 p);
-	    return 0;
-	}
-	p = endp;
-	if (n < 0 || n == 0x5E || n > 0xFF) {
-	    option_error("can't escape character 0x%x", n);
-	    ret = 0;
-	} else
-	    xmit_accm[n >> 5] |= 1 << (n & 0x1F);
-	while (*p == ',' || *p == ' ')
-	    ++p;
-    }
-    lcp_allowoptions[0].asyncmap = xmit_accm[0];
-    return ret;
-}
-
-static void
-printescape(opt, printer, arg)
-    option_t *opt;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	int n;
-	int first = 1;
-
-	for (n = 0; n < 256; ++n) {
-		if (n == 0x7d)
-			n += 2;		/* skip 7d, 7e */
-		if (xmit_accm[n >> 5] & (1 << (n & 0x1f))) {
-			if (!first)
-				printer(arg, ",");
-			else
-				first = 0;
-			printer(arg, "%x", n);
-		}
-	}
-	if (first)
-		printer(arg, "oops # nothing escaped");
-}
-
-/*
- * tty_init - do various tty-related initializations.
- */
-void tty_init()
-{
-    add_notifier(&pidchange, maybe_relock, 0);
-    the_channel = &tty_channel;
-    xmit_accm[3] = 0x60000000;
-}
-
-/*
- * tty_process_extra_options - work out which tty device we are using
- * and read its options file.
- */
-void tty_process_extra_options()
-{
-	using_pty = notty || ptycommand != NULL || pty_socket != NULL;
-	if (using_pty)
-		return;
-	if (default_device) {
-		char *p;
-		if (!isatty(0) || (p = ttyname(0)) == NULL) {
-			option_error("no device specified and stdin is not a tty");
-			exit(EXIT_OPTION_ERROR);
-		}
-		strlcpy(devnam, p, sizeof(devnam));
-		if (stat(devnam, &devstat) < 0)
-			fatal("Couldn't stat default device %s: %m", devnam);
-	}
-
-
-	/*
-	 * Parse the tty options file.
-	 * The per-tty options file should not change
-	 * ptycommand, pty_socket, notty or devnam.
-	 * options_for_tty doesn't override options set on the command line,
-	 * except for some privileged options.
-	 */
-	if (!options_for_tty())
-		exit(EXIT_OPTION_ERROR);
-}
-
-/*
- * tty_check_options - do consistency checks on the options we were given.
- */
-void
-tty_check_options()
-{
-	struct stat statbuf;
-	int fdflags;
-
-	if (demand && connect_script == 0) {
-		option_error("connect script is required for demand-dialling\n");
-		exit(EXIT_OPTION_ERROR);
-	}
-	/* default holdoff to 0 if no connect script has been given */
-	if (connect_script == 0 && !holdoff_specified)
-		holdoff = 0;
-
-	if (using_pty) {
-		if (!default_device) {
-			option_error("%s option precludes specifying device name",
-				     notty? "notty": "pty");
-			exit(EXIT_OPTION_ERROR);
-		}
-		if (ptycommand != NULL && notty) {
-			option_error("pty option is incompatible with notty option");
-			exit(EXIT_OPTION_ERROR);
-		}
-		if (pty_socket != NULL && (ptycommand != NULL || notty)) {
-			option_error("socket option is incompatible with pty and notty");
-			exit(EXIT_OPTION_ERROR);
-		}
-		default_device = notty;
-		lockflag = 0;
-		modem = 0;
-		if (notty && log_to_fd <= 1)
-			log_to_fd = -1;
-	} else {
-		/*
-		 * If the user has specified a device which is the same as
-		 * the one on stdin, pretend they didn't specify any.
-		 * If the device is already open read/write on stdin,
-		 * we assume we don't need to lock it, and we can open it
-		 * as root.
-		 */
-		if (fstat(0, &statbuf) >= 0 && S_ISCHR(statbuf.st_mode)
-		    && statbuf.st_rdev == devstat.st_rdev) {
-			default_device = 1;
-			fdflags = fcntl(0, F_GETFL);
-			if (fdflags != -1 && (fdflags & O_ACCMODE) == O_RDWR)
-				privopen = 1;
-		}
-	}
-	if (default_device)
-		nodetach = 1;
-
-	/*
-	 * Don't send log messages to the serial port, it tends to
-	 * confuse the peer. :-)
-	 */
-	if (log_to_fd >= 0 && fstat(log_to_fd, &statbuf) >= 0
-	    && S_ISCHR(statbuf.st_mode) && statbuf.st_rdev == devstat.st_rdev)
-		log_to_fd = -1;
-}
-
-/*
- * connect_tty - get the serial port ready to start doing PPP.
- * That is, open the serial port, set its speed and mode, and run
- * the connector and/or welcomer.
- */
-int connect_tty()
-{
-	char *connector;
-	int fdflags;
-	struct stat statbuf;
-	char numbuf[16];
-
-	/*
-	 * Get a pty master/slave pair if the pty, notty, socket,
-	 * or record options were specified.
-	 */
-	strlcpy(ppp_devnam, devnam, sizeof(ppp_devnam));
-	pty_master = -1;
-	pty_slave = -1;
-	real_ttyfd = -1;
-	if (using_pty || record_file != NULL) {
-		if (!get_pty(&pty_master, &pty_slave, ppp_devnam, uid)) {
-			error("Couldn't allocate pseudo-tty");
-			status = EXIT_FATAL_ERROR;
-			return -1;
-		}
-		set_up_tty(pty_slave, 1);
-	}
-
-	/*
-	 * Lock the device if we've been asked to.
-	 */
-	status = EXIT_LOCK_FAILED;
-	if (lockflag && !privopen) {
-		if (lock(devnam) < 0)
-			return -1;
-		locked = 1;
-	}
-
-	/*
-	 * Open the serial device and set it up to be the ppp interface.
-	 * First we open it in non-blocking mode so we can set the
-	 * various termios flags appropriately.  If we aren't dialling
-	 * out and we want to use the modem lines, we reopen it later
-	 * in order to wait for the carrier detect signal from the modem.
-	 */
-	hungup = 0;
-	kill_link = 0;
-	connector = doing_callback? callback_script: connect_script;
-	if (devnam[0] != 0) {
-		for (;;) {
-			/* If the user specified the device name, become the
-			   user before opening it. */
-			int err, prio;
-
-			prio = privopen? OPRIO_ROOT: tty_options[0].priority;
-			if (prio < OPRIO_ROOT)
-				seteuid(uid);
-			ttyfd = open(devnam, O_NONBLOCK | O_RDWR, 0);
-			err = errno;
-			if (prio < OPRIO_ROOT)
-				seteuid(0);
-			if (ttyfd >= 0)
-				break;
-			errno = err;
-			if (err != EINTR) {
-				error("Failed to open %s: %m", devnam);
-				status = EXIT_OPEN_FAILED;
-			}
-			if (!persist || err != EINTR)
-				return -1;
-		}
-		real_ttyfd = ttyfd;
-		if ((fdflags = fcntl(ttyfd, F_GETFL)) == -1
-		    || fcntl(ttyfd, F_SETFL, fdflags & ~O_NONBLOCK) < 0)
-			warn("Couldn't reset non-blocking mode on device: %m");
-
-		/*
-		 * Do the equivalent of `mesg n' to stop broadcast messages.
-		 */
-		if (fstat(ttyfd, &statbuf) < 0
-		    || fchmod(ttyfd, statbuf.st_mode & ~(S_IWGRP | S_IWOTH)) < 0) {
-			warn("Couldn't restrict write permissions to %s: %m", devnam);
-		} else
-			tty_mode = statbuf.st_mode;
-
-		/*
-		 * Set line speed, flow control, etc.
-		 * If we have a non-null connection or initializer script,
-		 * on most systems we set CLOCAL for now so that we can talk
-		 * to the modem before carrier comes up.  But this has the
-		 * side effect that we might miss it if CD drops before we
-		 * get to clear CLOCAL below.  On systems where we can talk
-		 * successfully to the modem with CLOCAL clear and CD down,
-		 * we could clear CLOCAL at this point.
-		 */
-		set_up_tty(ttyfd, ((connector != NULL && connector[0] != 0)
-				   || initializer != NULL));
-	}
-
-	/*
-	 * If the pty, socket, notty and/or record option was specified,
-	 * start up the character shunt now.
-	 */
-	status = EXIT_PTYCMD_FAILED;
-	if (ptycommand != NULL) {
-		if (record_file != NULL) {
-			int ipipe[2], opipe[2], ok;
-
-			if (pipe(ipipe) < 0 || pipe(opipe) < 0)
-				fatal("Couldn't create pipes for record option: %m");
-			ok = device_script(ptycommand, opipe[0], ipipe[1], 1) == 0
-				&& start_charshunt(ipipe[0], opipe[1]);
-			close(ipipe[0]);
-			close(ipipe[1]);
-			close(opipe[0]);
-			close(opipe[1]);
-			if (!ok)
-				return -1;
-		} else {
-			if (device_script(ptycommand, pty_master, pty_master, 1) < 0)
-				return -1;
-			ttyfd = pty_slave;
-			close(pty_master);
-			pty_master = -1;
-		}
-	} else if (pty_socket != NULL) {
-		int fd = open_socket(pty_socket);
-		if (fd < 0)
-			return -1;
-		if (!start_charshunt(fd, fd))
-			return -1;
-	} else if (notty) {
-		if (!start_charshunt(0, 1))
-			return -1;
-	} else if (record_file != NULL) {
-		if (!start_charshunt(ttyfd, ttyfd))
-			return -1;
-	}
-
-	/* run connection script */
-	if ((connector && connector[0]) || initializer) {
-		if (real_ttyfd != -1) {
-			/* XXX do this if doing_callback == CALLBACK_DIALIN? */
-			if (!default_device && modem) {
-				setdtr(real_ttyfd, 0);	/* in case modem is off hook */
-				sleep(1);
-				setdtr(real_ttyfd, 1);
-			}
-		}
-
-		if (initializer && initializer[0]) {
-			if (device_script(initializer, ttyfd, ttyfd, 0) < 0) {
-				error("Initializer script failed");
-				status = EXIT_INIT_FAILED;
-				return -1;
-			}
-			if (kill_link) {
-				disconnect_tty();
-				return -1;
-			}
-			info("Serial port initialized.");
-		}
-
-		if (connector && connector[0]) {
-			if (device_script(connector, ttyfd, ttyfd, 0) < 0) {
-				error("Connect script failed");
-				status = EXIT_CONNECT_FAILED;
-				return -1;
-			}
-			if (kill_link) {
-				disconnect_tty();
-				return -1;
-			}
-			info("Serial connection established.");
-		}
-
-		/* set line speed, flow control, etc.;
-		   clear CLOCAL if modem option */
-		if (real_ttyfd != -1)
-			set_up_tty(real_ttyfd, 0);
-
-		if (doing_callback == CALLBACK_DIALIN)
-			connector = NULL;
-	}
-
-	/* reopen tty if necessary to wait for carrier */
-	if (connector == NULL && modem && devnam[0] != 0) {
-		int i;
-		for (;;) {
-			if ((i = open(devnam, O_RDWR)) >= 0)
-				break;
-			if (errno != EINTR) {
-				error("Failed to reopen %s: %m", devnam);
-				status = EXIT_OPEN_FAILED;
-			}
-			if (!persist || errno != EINTR || hungup || kill_link)
-				return -1;
-		}
-		close(i);
-	}
-
-	slprintf(numbuf, sizeof(numbuf), "%d", baud_rate);
-	script_setenv("SPEED", numbuf, 0);
-
-	/* run welcome script, if any */
-	if (welcomer && welcomer[0]) {
-		if (device_script(welcomer, ttyfd, ttyfd, 0) < 0)
-			warn("Welcome script failed");
-	}
-
-	/*
-	 * If we are initiating this connection, wait for a short
-	 * time for something from the peer.  This can avoid bouncing
-	 * our packets off his tty before he has it set up.
-	 */
-	if (connector != NULL || ptycommand != NULL)
-		listen_time = connect_delay;
-
-	return ttyfd;
-}
-
-
-void disconnect_tty()
-{
-	if (disconnect_script == NULL || hungup)
-		return;
-	if (real_ttyfd >= 0)
-		set_up_tty(real_ttyfd, 1);
-	if (device_script(disconnect_script, ttyfd, ttyfd, 0) < 0) {
-		warn("disconnect script failed");
-	} else {
-		info("Serial link disconnected.");
-	}
-}
-
-void tty_close_fds()
-{
-	if (pty_master >= 0)
-		close(pty_master);
-	if (pty_slave >= 0)
-		close(pty_slave);
-	if (real_ttyfd >= 0) {
-		close(real_ttyfd);
-		real_ttyfd = -1;
-	}
-	/* N.B. ttyfd will == either pty_slave or real_ttyfd */
-}
-
-void cleanup_tty()
-{
-	if (real_ttyfd >= 0)
-		finish_tty();
-	tty_close_fds();
-	if (locked) {
-		unlock();
-		locked = 0;
-	}
-}
-
-/*
- * tty_do_send_config - set transmit-side PPP configuration.
- * We set the extended transmit ACCM here as well.
- */
-void
-tty_do_send_config(mtu, accm, pcomp, accomp)
-    int mtu;
-    u_int32_t accm;
-    int pcomp, accomp;
-{
-	tty_set_xaccm(xmit_accm);
-	tty_send_config(mtu, accm, pcomp, accomp);
-}
-
-/*
- * finish_tty - restore the terminal device to its original settings
- */
-static void
-finish_tty()
-{
-	/* drop dtr to hang up */
-	if (!default_device && modem) {
-		setdtr(real_ttyfd, 0);
-		/*
-		 * This sleep is in case the serial port has CLOCAL set by default,
-		 * and consequently will reassert DTR when we close the device.
-		 */
-		sleep(1);
-	}
-
-	restore_tty(real_ttyfd);
-
-	if (tty_mode != (mode_t) -1) {
-		if (fchmod(real_ttyfd, tty_mode) != 0) {
-			/* XXX if devnam is a symlink, this will change the link */
-			chmod(devnam, tty_mode);
-		}
-	}
-
-	close(real_ttyfd);
-	real_ttyfd = -1;
-}
-
-/*
- * maybe_relock - our PID has changed, maybe update the lock file.
- */
-static void
-maybe_relock(arg, pid)
-    void *arg;
-    int pid;
-{
-    if (locked)
-	relock(pid);
-}
-
-/*
- * open_socket - establish a stream socket connection to the nominated
- * host and port.
- */
-static int
-open_socket(dest)
-    char *dest;
-{
-    char *sep, *endp = NULL;
-    int sock, port = -1;
-    u_int32_t host;
-    struct hostent *hent;
-    struct sockaddr_in sad;
-
-    /* parse host:port and resolve host to an IP address */
-    sep = strchr(dest, ':');
-    if (sep != NULL)
-	port = strtol(sep+1, &endp, 10);
-    if (port < 0 || endp == sep+1 || sep == dest) {
-	error("Can't parse host:port for socket destination");
-	return -1;
-    }
-    *sep = 0;
-    host = inet_addr(dest);
-    if (host == (u_int32_t) -1) {
-	hent = gethostbyname(dest);
-	if (hent == NULL) {
-	    error("%s: unknown host in socket option", dest);
-	    *sep = ':';
-	    return -1;
-	}
-	host = *(u_int32_t *)(hent->h_addr_list[0]);
-    }
-    *sep = ':';
-
-    /* get a socket and connect it to the other end */
-    sock = socket(PF_INET, SOCK_STREAM, 0);
-    if (sock < 0) {
-	error("Can't create socket: %m");
-	return -1;
-    }
-    memset(&sad, 0, sizeof(sad));
-    sad.sin_family = AF_INET;
-    sad.sin_port = htons(port);
-    sad.sin_addr.s_addr = host;
-    if (connect(sock, (struct sockaddr *)&sad, sizeof(sad)) < 0) {
-	error("Can't connect to %s: %m", dest);
-	close(sock);
-	return -1;
-    }
-
-    return sock;
-}
-
-
-/*
- * start_charshunt - create a child process to run the character shunt.
- */
-static int
-start_charshunt(ifd, ofd)
-    int ifd, ofd;
-{
-    int cpid;
-
-    cpid = fork();
-    if (cpid == -1) {
-	error("Can't fork process for character shunt: %m");
-	return 0;
-    }
-    if (cpid == 0) {
-	/* child */
-	close(pty_slave);
-	setuid(uid);
-	if (getuid() != uid)
-	    fatal("setuid failed");
-	setgid(getgid());
-	if (!nodetach)
-	    log_to_fd = -1;
-	charshunt(ifd, ofd, record_file);
-	exit(0);
-    }
-    charshunt_pid = cpid;
-    add_notifier(&sigreceived, stop_charshunt, 0);
-    close(pty_master);
-    pty_master = -1;
-    ttyfd = pty_slave;
-    record_child(cpid, "pppd (charshunt)", charshunt_done, NULL);
-    return 1;
-}
-
-static void
-charshunt_done(arg)
-    void *arg;
-{
-	charshunt_pid = 0;
-}
-
-static void
-stop_charshunt(arg, sig)
-    void *arg;
-    int sig;
-{
-	if (charshunt_pid)
-		kill(charshunt_pid, (sig == SIGINT? sig: SIGTERM));
-}
-
-/*
- * charshunt - the character shunt, which passes characters between
- * the pty master side and the serial port (or stdin/stdout).
- * This runs as the user (not as root).
- * (We assume ofd >= ifd which is true the way this gets called. :-).
- */
-static void
-charshunt(ifd, ofd, record_file)
-    int ifd, ofd;
-    char *record_file;
-{
-    int n, nfds;
-    fd_set ready, writey;
-    u_char *ibufp, *obufp;
-    int nibuf, nobuf;
-    int flags;
-    int pty_readable, stdin_readable;
-    struct timeval lasttime;
-    FILE *recordf = NULL;
-    int ilevel, olevel, max_level;
-    struct timeval levelt, tout, *top;
-    extern u_char inpacket_buf[];
-
-    /*
-     * Reset signal handlers.
-     */
-    signal(SIGHUP, SIG_IGN);		/* Hangup */
-    signal(SIGINT, SIG_DFL);		/* Interrupt */
-    signal(SIGTERM, SIG_DFL);		/* Terminate */
-    signal(SIGCHLD, SIG_DFL);
-    signal(SIGUSR1, SIG_DFL);
-    signal(SIGUSR2, SIG_DFL);
-    signal(SIGABRT, SIG_DFL);
-    signal(SIGALRM, SIG_DFL);
-    signal(SIGFPE, SIG_DFL);
-    signal(SIGILL, SIG_DFL);
-    signal(SIGPIPE, SIG_DFL);
-    signal(SIGQUIT, SIG_DFL);
-    signal(SIGSEGV, SIG_DFL);
-#ifdef SIGBUS
-    signal(SIGBUS, SIG_DFL);
-#endif
-#ifdef SIGEMT
-    signal(SIGEMT, SIG_DFL);
-#endif
-#ifdef SIGPOLL
-    signal(SIGPOLL, SIG_DFL);
-#endif
-#ifdef SIGPROF
-    signal(SIGPROF, SIG_DFL);
-#endif
-#ifdef SIGSYS
-    signal(SIGSYS, SIG_DFL);
-#endif
-#ifdef SIGTRAP
-    signal(SIGTRAP, SIG_DFL);
-#endif
-#ifdef SIGVTALRM
-    signal(SIGVTALRM, SIG_DFL);
-#endif
-#ifdef SIGXCPU
-    signal(SIGXCPU, SIG_DFL);
-#endif
-#ifdef SIGXFSZ
-    signal(SIGXFSZ, SIG_DFL);
-#endif
-
-    /*
-     * Open the record file if required.
-     */
-    if (record_file != NULL) {
-	recordf = fopen(record_file, "a");
-	if (recordf == NULL)
-	    error("Couldn't create record file %s: %m", record_file);
-    }
-
-    /* set all the fds to non-blocking mode */
-    flags = fcntl(pty_master, F_GETFL);
-    if (flags == -1
-	|| fcntl(pty_master, F_SETFL, flags | O_NONBLOCK) == -1)
-	warn("couldn't set pty master to nonblock: %m");
-    flags = fcntl(ifd, F_GETFL);
-    if (flags == -1
-	|| fcntl(ifd, F_SETFL, flags | O_NONBLOCK) == -1)
-	warn("couldn't set %s to nonblock: %m", (ifd==0? "stdin": "tty"));
-    if (ofd != ifd) {
-	flags = fcntl(ofd, F_GETFL);
-	if (flags == -1
-	    || fcntl(ofd, F_SETFL, flags | O_NONBLOCK) == -1)
-	    warn("couldn't set stdout to nonblock: %m");
-    }
-
-    nibuf = nobuf = 0;
-    ibufp = obufp = NULL;
-    pty_readable = stdin_readable = 1;
-
-    ilevel = olevel = 0;
-    gettimeofday(&levelt, NULL);
-    if (max_data_rate) {
-	max_level = max_data_rate / 10;
-	if (max_level < 100)
-	    max_level = 100;
-    } else
-	max_level = PPP_MRU + PPP_HDRLEN + 1;
-
-    nfds = (ofd > pty_master? ofd: pty_master) + 1;
-    if (recordf != NULL) {
-	gettimeofday(&lasttime, NULL);
-	putc(7, recordf);	/* put start marker */
-	putc(lasttime.tv_sec >> 24, recordf);
-	putc(lasttime.tv_sec >> 16, recordf);
-	putc(lasttime.tv_sec >> 8, recordf);
-	putc(lasttime.tv_sec, recordf);
-	lasttime.tv_usec = 0;
-    }
-
-    while (nibuf != 0 || nobuf != 0 || pty_readable || stdin_readable) {
-	top = 0;
-	tout.tv_sec = 0;
-	tout.tv_usec = 10000;
-	FD_ZERO(&ready);
-	FD_ZERO(&writey);
-	if (nibuf != 0) {
-	    if (ilevel >= max_level)
-		top = &tout;
-	    else
-		FD_SET(pty_master, &writey);
-	} else if (stdin_readable)
-	    FD_SET(ifd, &ready);
-	if (nobuf != 0) {
-	    if (olevel >= max_level)
-		top = &tout;
-	    else
-		FD_SET(ofd, &writey);
-	} else if (pty_readable)
-	    FD_SET(pty_master, &ready);
-	if (select(nfds, &ready, &writey, NULL, top) < 0) {
-	    if (errno != EINTR)
-		fatal("select");
-	    continue;
-	}
-	if (max_data_rate) {
-	    double dt;
-	    int nbt;
-	    struct timeval now;
-
-	    gettimeofday(&now, NULL);
-	    dt = (now.tv_sec - levelt.tv_sec
-		  + (now.tv_usec - levelt.tv_usec) / 1e6);
-	    nbt = (int)(dt * max_data_rate);
-	    ilevel = (nbt < 0 || nbt > ilevel)? 0: ilevel - nbt;
-	    olevel = (nbt < 0 || nbt > olevel)? 0: olevel - nbt;
-	    levelt = now;
-	} else
-	    ilevel = olevel = 0;
-	if (FD_ISSET(ifd, &ready)) {
-	    ibufp = inpacket_buf;
-	    nibuf = read(ifd, ibufp, PPP_MRU + PPP_HDRLEN);
-	    if (nibuf < 0 && errno == EIO)
-		nibuf = 0;
-	    if (nibuf < 0) {
-		if (!(errno == EINTR || errno == EAGAIN)) {
-		    error("Error reading standard input: %m");
-		    break;
-		}
-		nibuf = 0;
-	    } else if (nibuf == 0) {
-		/* end of file from stdin */
-		stdin_readable = 0;
-		/* do a 0-length write, hopefully this will generate
-		   an EOF (hangup) on the slave side. */
-		write(pty_master, inpacket_buf, 0);
-		if (recordf)
-		    if (!record_write(recordf, 4, NULL, 0, &lasttime))
-			recordf = NULL;
-	    } else {
-		FD_SET(pty_master, &writey);
-		if (recordf)
-		    if (!record_write(recordf, 2, ibufp, nibuf, &lasttime))
-			recordf = NULL;
-	    }
-	}
-	if (FD_ISSET(pty_master, &ready)) {
-	    obufp = outpacket_buf;
-	    nobuf = read(pty_master, obufp, PPP_MRU + PPP_HDRLEN);
-	    if (nobuf < 0 && errno == EIO)
-		nobuf = 0;
-	    if (nobuf < 0) {
-		if (!(errno == EINTR || errno == EAGAIN)) {
-		    error("Error reading pseudo-tty master: %m");
-		    break;
-		}
-		nobuf = 0;
-	    } else if (nobuf == 0) {
-		/* end of file from the pty - slave side has closed */
-		pty_readable = 0;
-		stdin_readable = 0;	/* pty is not writable now */
-		nibuf = 0;
-		close(ofd);
-		if (recordf)
-		    if (!record_write(recordf, 3, NULL, 0, &lasttime))
-			recordf = NULL;
-	    } else {
-		FD_SET(ofd, &writey);
-		if (recordf)
-		    if (!record_write(recordf, 1, obufp, nobuf, &lasttime))
-			recordf = NULL;
-	    }
-	}
-	if (FD_ISSET(ofd, &writey)) {
-	    n = nobuf;
-	    if (olevel + n > max_level)
-		n = max_level - olevel;
-	    n = write(ofd, obufp, n);
-	    if (n < 0) {
-		if (errno == EIO) {
-		    pty_readable = 0;
-		    nobuf = 0;
-		} else if (errno != EAGAIN && errno != EINTR) {
-		    error("Error writing standard output: %m");
-		    break;
-		}
-	    } else {
-		obufp += n;
-		nobuf -= n;
-		olevel += n;
-	    }
-	}
-	if (FD_ISSET(pty_master, &writey)) {
-	    n = nibuf;
-	    if (ilevel + n > max_level)
-		n = max_level - ilevel;
-	    n = write(pty_master, ibufp, n);
-	    if (n < 0) {
-		if (errno == EIO) {
-		    stdin_readable = 0;
-		    nibuf = 0;
-		} else if (errno != EAGAIN && errno != EINTR) {
-		    error("Error writing pseudo-tty master: %m");
-		    break;
-		}
-	    } else {
-		ibufp += n;
-		nibuf -= n;
-		ilevel += n;
-	    }
-	}
-    }
-    exit(0);
-}
-
-static int
-record_write(f, code, buf, nb, tp)
-    FILE *f;
-    int code;
-    u_char *buf;
-    int nb;
-    struct timeval *tp;
-{
-    struct timeval now;
-    int diff;
-
-    gettimeofday(&now, NULL);
-    now.tv_usec /= 100000;	/* actually 1/10 s, not usec now */
-    diff = (now.tv_sec - tp->tv_sec) * 10 + (now.tv_usec - tp->tv_usec);
-    if (diff > 0) {
-	if (diff > 255) {
-	    putc(5, f);
-	    putc(diff >> 24, f);
-	    putc(diff >> 16, f);
-	    putc(diff >> 8, f);
-	    putc(diff, f);
-	} else {
-	    putc(6, f);
-	    putc(diff, f);
-	}
-	*tp = now;
-    }
-    putc(code, f);
-    if (buf != NULL) {
-	putc(nb >> 8, f);
-	putc(nb, f);
-	fwrite(buf, nb, 1, f);
-    }
-    fflush(f);
-    if (ferror(f)) {
-	error("Error writing record file: %m");
-	return 0;
-    }
-    return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/upap.c b/mdk-stage1/ppp/pppd/upap.c
deleted file mode 100644
index bd569fb74..000000000
--- a/mdk-stage1/ppp/pppd/upap.c
+++ /dev/null
@@ -1,640 +0,0 @@
-/*
- * upap.c - User/Password Authentication Protocol.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-/*
- * TODO:
- */
-
-#include <stdio.h>
-#include <string.h>
-
-#include "pppd.h"
-#include "upap.h"
-
-static const char rcsid[] = RCSID;
-
-static bool hide_password = 1;
-
-/*
- * Command-line options.
- */
-static option_t pap_option_list[] = {
-    { "hide-password", o_bool, &hide_password,
-      "Don't output passwords to log", OPT_PRIO | 1 },
-    { "show-password", o_bool, &hide_password,
-      "Show password string in debug log messages", OPT_PRIOSUB | 0 },
-
-    { "pap-restart", o_int, &upap[0].us_timeouttime,
-      "Set retransmit timeout for PAP", OPT_PRIO },
-    { "pap-max-authreq", o_int, &upap[0].us_maxtransmits,
-      "Set max number of transmissions for auth-reqs", OPT_PRIO },
-    { "pap-timeout", o_int, &upap[0].us_reqtimeout,
-      "Set time limit for peer PAP authentication", OPT_PRIO },
-
-    { NULL }
-};
-
-/*
- * Protocol entry points.
- */
-static void upap_init __P((int));
-static void upap_lowerup __P((int));
-static void upap_lowerdown __P((int));
-static void upap_input __P((int, u_char *, int));
-static void upap_protrej __P((int));
-static int  upap_printpkt __P((u_char *, int,
-			       void (*) __P((void *, char *, ...)), void *));
-
-struct protent pap_protent = {
-    PPP_PAP,
-    upap_init,
-    upap_input,
-    upap_protrej,
-    upap_lowerup,
-    upap_lowerdown,
-    NULL,
-    NULL,
-    upap_printpkt,
-    NULL,
-    1,
-    "PAP",
-    NULL,
-    pap_option_list,
-    NULL,
-    NULL,
-    NULL
-};
-
-upap_state upap[NUM_PPP];		/* UPAP state; one for each unit */
-
-static void upap_timeout __P((void *));
-static void upap_reqtimeout __P((void *));
-static void upap_rauthreq __P((upap_state *, u_char *, int, int));
-static void upap_rauthack __P((upap_state *, u_char *, int, int));
-static void upap_rauthnak __P((upap_state *, u_char *, int, int));
-static void upap_sauthreq __P((upap_state *));
-static void upap_sresp __P((upap_state *, int, int, char *, int));
-
-
-/*
- * upap_init - Initialize a UPAP unit.
- */
-static void
-upap_init(unit)
-    int unit;
-{
-    upap_state *u = &upap[unit];
-
-    u->us_unit = unit;
-    u->us_user = NULL;
-    u->us_userlen = 0;
-    u->us_passwd = NULL;
-    u->us_passwdlen = 0;
-    u->us_clientstate = UPAPCS_INITIAL;
-    u->us_serverstate = UPAPSS_INITIAL;
-    u->us_id = 0;
-    u->us_timeouttime = UPAP_DEFTIMEOUT;
-    u->us_maxtransmits = 10;
-    u->us_reqtimeout = UPAP_DEFREQTIME;
-}
-
-
-/*
- * upap_authwithpeer - Authenticate us with our peer (start client).
- *
- * Set new state and send authenticate's.
- */
-void
-upap_authwithpeer(unit, user, password)
-    int unit;
-    char *user, *password;
-{
-    upap_state *u = &upap[unit];
-
-    /* Save the username and password we're given */
-    u->us_user = user;
-    u->us_userlen = strlen(user);
-    u->us_passwd = password;
-    u->us_passwdlen = strlen(password);
-    u->us_transmits = 0;
-
-    /* Lower layer up yet? */
-    if (u->us_clientstate == UPAPCS_INITIAL ||
-	u->us_clientstate == UPAPCS_PENDING) {
-	u->us_clientstate = UPAPCS_PENDING;
-	return;
-    }
-
-    upap_sauthreq(u);			/* Start protocol */
-}
-
-
-/*
- * upap_authpeer - Authenticate our peer (start server).
- *
- * Set new state.
- */
-void
-upap_authpeer(unit)
-    int unit;
-{
-    upap_state *u = &upap[unit];
-
-    /* Lower layer up yet? */
-    if (u->us_serverstate == UPAPSS_INITIAL ||
-	u->us_serverstate == UPAPSS_PENDING) {
-	u->us_serverstate = UPAPSS_PENDING;
-	return;
-    }
-
-    u->us_serverstate = UPAPSS_LISTEN;
-    if (u->us_reqtimeout > 0)
-	TIMEOUT(upap_reqtimeout, u, u->us_reqtimeout);
-}
-
-
-/*
- * upap_timeout - Retransmission timer for sending auth-reqs expired.
- */
-static void
-upap_timeout(arg)
-    void *arg;
-{
-    upap_state *u = (upap_state *) arg;
-
-    if (u->us_clientstate != UPAPCS_AUTHREQ)
-	return;
-
-    if (u->us_transmits >= u->us_maxtransmits) {
-	/* give up in disgust */
-	error("No response to PAP authenticate-requests");
-	u->us_clientstate = UPAPCS_BADAUTH;
-	auth_withpeer_fail(u->us_unit, PPP_PAP);
-	return;
-    }
-
-    upap_sauthreq(u);		/* Send Authenticate-Request */
-}
-
-
-/*
- * upap_reqtimeout - Give up waiting for the peer to send an auth-req.
- */
-static void
-upap_reqtimeout(arg)
-    void *arg;
-{
-    upap_state *u = (upap_state *) arg;
-
-    if (u->us_serverstate != UPAPSS_LISTEN)
-	return;			/* huh?? */
-
-    auth_peer_fail(u->us_unit, PPP_PAP);
-    u->us_serverstate = UPAPSS_BADAUTH;
-}
-
-
-/*
- * upap_lowerup - The lower layer is up.
- *
- * Start authenticating if pending.
- */
-static void
-upap_lowerup(unit)
-    int unit;
-{
-    upap_state *u = &upap[unit];
-
-    if (u->us_clientstate == UPAPCS_INITIAL)
-	u->us_clientstate = UPAPCS_CLOSED;
-    else if (u->us_clientstate == UPAPCS_PENDING) {
-	upap_sauthreq(u);	/* send an auth-request */
-    }
-
-    if (u->us_serverstate == UPAPSS_INITIAL)
-	u->us_serverstate = UPAPSS_CLOSED;
-    else if (u->us_serverstate == UPAPSS_PENDING) {
-	u->us_serverstate = UPAPSS_LISTEN;
-	if (u->us_reqtimeout > 0)
-	    TIMEOUT(upap_reqtimeout, u, u->us_reqtimeout);
-    }
-}
-
-
-/*
- * upap_lowerdown - The lower layer is down.
- *
- * Cancel all timeouts.
- */
-static void
-upap_lowerdown(unit)
-    int unit;
-{
-    upap_state *u = &upap[unit];
-
-    if (u->us_clientstate == UPAPCS_AUTHREQ)	/* Timeout pending? */
-	UNTIMEOUT(upap_timeout, u);		/* Cancel timeout */
-    if (u->us_serverstate == UPAPSS_LISTEN && u->us_reqtimeout > 0)
-	UNTIMEOUT(upap_reqtimeout, u);
-
-    u->us_clientstate = UPAPCS_INITIAL;
-    u->us_serverstate = UPAPSS_INITIAL;
-}
-
-
-/*
- * upap_protrej - Peer doesn't speak this protocol.
- *
- * This shouldn't happen.  In any case, pretend lower layer went down.
- */
-static void
-upap_protrej(unit)
-    int unit;
-{
-    upap_state *u = &upap[unit];
-
-    if (u->us_clientstate == UPAPCS_AUTHREQ) {
-	error("PAP authentication failed due to protocol-reject");
-	auth_withpeer_fail(unit, PPP_PAP);
-    }
-    if (u->us_serverstate == UPAPSS_LISTEN) {
-	error("PAP authentication of peer failed (protocol-reject)");
-	auth_peer_fail(unit, PPP_PAP);
-    }
-    upap_lowerdown(unit);
-}
-
-
-/*
- * upap_input - Input UPAP packet.
- */
-static void
-upap_input(unit, inpacket, l)
-    int unit;
-    u_char *inpacket;
-    int l;
-{
-    upap_state *u = &upap[unit];
-    u_char *inp;
-    u_char code, id;
-    int len;
-
-    /*
-     * Parse header (code, id and length).
-     * If packet too short, drop it.
-     */
-    inp = inpacket;
-    if (l < UPAP_HEADERLEN) {
-	UPAPDEBUG(("pap_input: rcvd short header."));
-	return;
-    }
-    GETCHAR(code, inp);
-    GETCHAR(id, inp);
-    GETSHORT(len, inp);
-    if (len < UPAP_HEADERLEN) {
-	UPAPDEBUG(("pap_input: rcvd illegal length."));
-	return;
-    }
-    if (len > l) {
-	UPAPDEBUG(("pap_input: rcvd short packet."));
-	return;
-    }
-    len -= UPAP_HEADERLEN;
-
-    /*
-     * Action depends on code.
-     */
-    switch (code) {
-    case UPAP_AUTHREQ:
-	upap_rauthreq(u, inp, id, len);
-	break;
-
-    case UPAP_AUTHACK:
-	upap_rauthack(u, inp, id, len);
-	break;
-
-    case UPAP_AUTHNAK:
-	upap_rauthnak(u, inp, id, len);
-	break;
-
-    default:				/* XXX Need code reject */
-	break;
-    }
-}
-
-
-/*
- * upap_rauth - Receive Authenticate.
- */
-static void
-upap_rauthreq(u, inp, id, len)
-    upap_state *u;
-    u_char *inp;
-    int id;
-    int len;
-{
-    u_char ruserlen, rpasswdlen;
-    char *ruser, *rpasswd;
-    int retcode;
-    char *msg;
-    int msglen;
-
-    if (u->us_serverstate < UPAPSS_LISTEN)
-	return;
-
-    /*
-     * If we receive a duplicate authenticate-request, we are
-     * supposed to return the same status as for the first request.
-     */
-    if (u->us_serverstate == UPAPSS_OPEN) {
-	upap_sresp(u, UPAP_AUTHACK, id, "", 0);	/* return auth-ack */
-	return;
-    }
-    if (u->us_serverstate == UPAPSS_BADAUTH) {
-	upap_sresp(u, UPAP_AUTHNAK, id, "", 0);	/* return auth-nak */
-	return;
-    }
-
-    /*
-     * Parse user/passwd.
-     */
-    if (len < 1) {
-	UPAPDEBUG(("pap_rauth: rcvd short packet."));
-	return;
-    }
-    GETCHAR(ruserlen, inp);
-    len -= sizeof (u_char) + ruserlen + sizeof (u_char);
-    if (len < 0) {
-	UPAPDEBUG(("pap_rauth: rcvd short packet."));
-	return;
-    }
-    ruser = (char *) inp;
-    INCPTR(ruserlen, inp);
-    GETCHAR(rpasswdlen, inp);
-    if (len < rpasswdlen) {
-	UPAPDEBUG(("pap_rauth: rcvd short packet."));
-	return;
-    }
-    rpasswd = (char *) inp;
-
-    /*
-     * Check the username and password given.
-     */
-    retcode = check_passwd(u->us_unit, ruser, ruserlen, rpasswd,
-			   rpasswdlen, &msg);
-    BZERO(rpasswd, rpasswdlen);
-    msglen = strlen(msg);
-    if (msglen > 255)
-	msglen = 255;
-
-    upap_sresp(u, retcode, id, msg, msglen);
-
-    if (retcode == UPAP_AUTHACK) {
-	u->us_serverstate = UPAPSS_OPEN;
-	auth_peer_success(u->us_unit, PPP_PAP, ruser, ruserlen);
-    } else {
-	u->us_serverstate = UPAPSS_BADAUTH;
-	auth_peer_fail(u->us_unit, PPP_PAP);
-    }
-
-    if (u->us_reqtimeout > 0)
-	UNTIMEOUT(upap_reqtimeout, u);
-}
-
-
-/*
- * upap_rauthack - Receive Authenticate-Ack.
- */
-static void
-upap_rauthack(u, inp, id, len)
-    upap_state *u;
-    u_char *inp;
-    int id;
-    int len;
-{
-    u_char msglen;
-    char *msg;
-
-    if (u->us_clientstate != UPAPCS_AUTHREQ) /* XXX */
-	return;
-
-    /*
-     * Parse message.
-     */
-    if (len < 1) {
-	UPAPDEBUG(("pap_rauthack: ignoring missing msg-length."));
-    } else {
-	GETCHAR(msglen, inp);
-	if (msglen > 0) {
-	    len -= sizeof (u_char);
-	    if (len < msglen) {
-		UPAPDEBUG(("pap_rauthack: rcvd short packet."));
-		return;
-	    }
-	    msg = (char *) inp;
-	    PRINTMSG(msg, msglen);
-	}
-    }
-
-    u->us_clientstate = UPAPCS_OPEN;
-
-    auth_withpeer_success(u->us_unit, PPP_PAP);
-}
-
-
-/*
- * upap_rauthnak - Receive Authenticate-Nakk.
- */
-static void
-upap_rauthnak(u, inp, id, len)
-    upap_state *u;
-    u_char *inp;
-    int id;
-    int len;
-{
-    u_char msglen;
-    char *msg;
-
-    if (u->us_clientstate != UPAPCS_AUTHREQ) /* XXX */
-	return;
-
-    /*
-     * Parse message.
-     */
-    if (len < 1) {
-	UPAPDEBUG(("pap_rauthnak: ignoring missing msg-length."));
-    } else {
-	GETCHAR(msglen, inp);
-	if (msglen > 0) {
-	    len -= sizeof (u_char);
-	    if (len < msglen) {
-		UPAPDEBUG(("pap_rauthnak: rcvd short packet."));
-		return;
-	    }
-	    msg = (char *) inp;
-	    PRINTMSG(msg, msglen);
-	}
-    }
-
-    u->us_clientstate = UPAPCS_BADAUTH;
-
-    error("PAP authentication failed");
-    auth_withpeer_fail(u->us_unit, PPP_PAP);
-}
-
-
-/*
- * upap_sauthreq - Send an Authenticate-Request.
- */
-static void
-upap_sauthreq(u)
-    upap_state *u;
-{
-    u_char *outp;
-    int outlen;
-
-    outlen = UPAP_HEADERLEN + 2 * sizeof (u_char) +
-	u->us_userlen + u->us_passwdlen;
-    outp = outpacket_buf;
-    
-    MAKEHEADER(outp, PPP_PAP);
-
-    PUTCHAR(UPAP_AUTHREQ, outp);
-    PUTCHAR(++u->us_id, outp);
-    PUTSHORT(outlen, outp);
-    PUTCHAR(u->us_userlen, outp);
-    BCOPY(u->us_user, outp, u->us_userlen);
-    INCPTR(u->us_userlen, outp);
-    PUTCHAR(u->us_passwdlen, outp);
-    BCOPY(u->us_passwd, outp, u->us_passwdlen);
-
-    output(u->us_unit, outpacket_buf, outlen + PPP_HDRLEN);
-
-    TIMEOUT(upap_timeout, u, u->us_timeouttime);
-    ++u->us_transmits;
-    u->us_clientstate = UPAPCS_AUTHREQ;
-}
-
-
-/*
- * upap_sresp - Send a response (ack or nak).
- */
-static void
-upap_sresp(u, code, id, msg, msglen)
-    upap_state *u;
-    u_char code, id;
-    char *msg;
-    int msglen;
-{
-    u_char *outp;
-    int outlen;
-
-    outlen = UPAP_HEADERLEN + sizeof (u_char) + msglen;
-    outp = outpacket_buf;
-    MAKEHEADER(outp, PPP_PAP);
-
-    PUTCHAR(code, outp);
-    PUTCHAR(id, outp);
-    PUTSHORT(outlen, outp);
-    PUTCHAR(msglen, outp);
-    BCOPY(msg, outp, msglen);
-    output(u->us_unit, outpacket_buf, outlen + PPP_HDRLEN);
-}
-
-/*
- * upap_printpkt - print the contents of a PAP packet.
- */
-static char *upap_codenames[] = {
-    "AuthReq", "AuthAck", "AuthNak"
-};
-
-static int
-upap_printpkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int code, id, len;
-    int mlen, ulen, wlen;
-    char *user, *pwd, *msg;
-    u_char *pstart;
-
-    if (plen < UPAP_HEADERLEN)
-	return 0;
-    pstart = p;
-    GETCHAR(code, p);
-    GETCHAR(id, p);
-    GETSHORT(len, p);
-    if (len < UPAP_HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(upap_codenames) / sizeof(char *))
-	printer(arg, " %s", upap_codenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code);
-    printer(arg, " id=0x%x", id);
-    len -= UPAP_HEADERLEN;
-    switch (code) {
-    case UPAP_AUTHREQ:
-	if (len < 1)
-	    break;
-	ulen = p[0];
-	if (len < ulen + 2)
-	    break;
-	wlen = p[ulen + 1];
-	if (len < ulen + wlen + 2)
-	    break;
-	user = (char *) (p + 1);
-	pwd = (char *) (p + ulen + 2);
-	p += ulen + wlen + 2;
-	len -= ulen + wlen + 2;
-	printer(arg, " user=");
-	print_string(user, ulen, printer, arg);
-	printer(arg, " password=");
-	if (!hide_password)
-	    print_string(pwd, wlen, printer, arg);
-	else
-	    printer(arg, "<hidden>");
-	break;
-    case UPAP_AUTHACK:
-    case UPAP_AUTHNAK:
-	if (len < 1)
-	    break;
-	mlen = p[0];
-	if (len < mlen + 1)
-	    break;
-	msg = (char *) (p + 1);
-	p += mlen + 1;
-	len -= mlen + 1;
-	printer(arg, " ");
-	print_string(msg, mlen, printer, arg);
-	break;
-    }
-
-    /* print the rest of the bytes in the packet */
-    for (; len > 0; --len) {
-	GETCHAR(code, p);
-	printer(arg, " %.2x", code);
-    }
-
-    return p - pstart;
-}
diff --git a/mdk-stage1/ppp/pppd/upap.h b/mdk-stage1/ppp/pppd/upap.h
deleted file mode 100644
index 42d6f4f0f..000000000
--- a/mdk-stage1/ppp/pppd/upap.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * upap.h - User/Password Authentication Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Packet header = Code, id, length.
- */
-#define UPAP_HEADERLEN	4
-
-
-/*
- * UPAP codes.
- */
-#define UPAP_AUTHREQ	1	/* Authenticate-Request */
-#define UPAP_AUTHACK	2	/* Authenticate-Ack */
-#define UPAP_AUTHNAK	3	/* Authenticate-Nak */
-
-
-/*
- * Each interface is described by upap structure.
- */
-typedef struct upap_state {
-    int us_unit;		/* Interface unit number */
-    char *us_user;		/* User */
-    int us_userlen;		/* User length */
-    char *us_passwd;		/* Password */
-    int us_passwdlen;		/* Password length */
-    int us_clientstate;		/* Client state */
-    int us_serverstate;		/* Server state */
-    u_char us_id;		/* Current id */
-    int us_timeouttime;		/* Timeout (seconds) for auth-req retrans. */
-    int us_transmits;		/* Number of auth-reqs sent */
-    int us_maxtransmits;	/* Maximum number of auth-reqs to send */
-    int us_reqtimeout;		/* Time to wait for auth-req from peer */
-} upap_state;
-
-
-/*
- * Client states.
- */
-#define UPAPCS_INITIAL	0	/* Connection down */
-#define UPAPCS_CLOSED	1	/* Connection up, haven't requested auth */
-#define UPAPCS_PENDING	2	/* Connection down, have requested auth */
-#define UPAPCS_AUTHREQ	3	/* We've sent an Authenticate-Request */
-#define UPAPCS_OPEN	4	/* We've received an Ack */
-#define UPAPCS_BADAUTH	5	/* We've received a Nak */
-
-/*
- * Server states.
- */
-#define UPAPSS_INITIAL	0	/* Connection down */
-#define UPAPSS_CLOSED	1	/* Connection up, haven't requested auth */
-#define UPAPSS_PENDING	2	/* Connection down, have requested auth */
-#define UPAPSS_LISTEN	3	/* Listening for an Authenticate */
-#define UPAPSS_OPEN	4	/* We've sent an Ack */
-#define UPAPSS_BADAUTH	5	/* We've sent a Nak */
-
-
-/*
- * Timeouts.
- */
-#define UPAP_DEFTIMEOUT	3	/* Timeout (seconds) for retransmitting req */
-#define UPAP_DEFREQTIME	30	/* Time to wait for auth-req from peer */
-
-extern upap_state upap[];
-
-void upap_authwithpeer __P((int, char *, char *));
-void upap_authpeer __P((int));
-
-extern struct protent pap_protent;
diff --git a/mdk-stage1/ppp/pppd/utils.c b/mdk-stage1/ppp/pppd/utils.c
deleted file mode 100644
index 9c987cfcd..000000000
--- a/mdk-stage1/ppp/pppd/utils.c
+++ /dev/null
@@ -1,949 +0,0 @@
-/*
- * utils.c - various utility functions used in pppd.
- *
- * Copyright (c) 1999 The Australian National University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the Australian National University.  The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdio.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <signal.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <syslog.h>
-#include <netdb.h>
-#include <utmp.h>
-#include <pwd.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#ifdef SVR4
-#include <sys/mkdev.h>
-#endif
-
-#include "pppd.h"
-#include <time.h>
-
-static const char rcsid[] = RCSID;
-
-#if defined(SUNOS4)
-extern char *strerror();
-#endif
-
-static void logit __P((int, char *, va_list));
-static void log_write __P((int, char *));
-static void vslp_printer __P((void *, char *, ...));
-static void format_packet __P((u_char *, int, void (*) (void *, char *, ...),
-			       void *));
-
-struct buffer_info {
-    char *ptr;
-    int len;
-};
-
-/*
- * strlcpy - like strcpy/strncpy, doesn't overflow destination buffer,
- * always leaves destination null-terminated (for len > 0).
- */
-size_t
-strlcpy(dest, src, len)
-    char *dest;
-    const char *src;
-    size_t len;
-{
-    size_t ret = strlen(src);
-
-    if (len != 0) {
-	if (ret < len)
-	    strcpy(dest, src);
-	else {
-	    strncpy(dest, src, len - 1);
-	    dest[len-1] = 0;
-	}
-    }
-    return ret;
-}
-
-/*
- * strlcat - like strcat/strncat, doesn't overflow destination buffer,
- * always leaves destination null-terminated (for len > 0).
- */
-size_t
-strlcat(dest, src, len)
-    char *dest;
-    const char *src;
-    size_t len;
-{
-    size_t dlen = strlen(dest);
-
-    return dlen + strlcpy(dest + dlen, src, (len > dlen? len - dlen: 0));
-}
-
-
-/*
- * slprintf - format a message into a buffer.  Like sprintf except we
- * also specify the length of the output buffer, and we handle
- * %r (recursive format), %m (error message), %v (visible string),
- * %q (quoted string), %t (current time) and %I (IP address) formats.
- * Doesn't do floating-point formats.
- * Returns the number of chars put into buf.
- */
-int
-slprintf __V((char *buf, int buflen, char *fmt, ...))
-{
-    va_list args;
-    int n;
-
-#if defined(__STDC__)
-    va_start(args, fmt);
-#else
-    char *buf;
-    int buflen;
-    char *fmt;
-    va_start(args);
-    buf = va_arg(args, char *);
-    buflen = va_arg(args, int);
-    fmt = va_arg(args, char *);
-#endif
-    n = vslprintf(buf, buflen, fmt, args);
-    va_end(args);
-    return n;
-}
-
-/*
- * vslprintf - like slprintf, takes a va_list instead of a list of args.
- */
-#define OUTCHAR(c)	(buflen > 0? (--buflen, *buf++ = (c)): 0)
-
-int
-vslprintf(buf, buflen, fmt, args)
-    char *buf;
-    int buflen;
-    char *fmt;
-    va_list args;
-{
-    int c, i, n;
-    int width, prec, fillch;
-    int base, len, neg, quoted;
-    unsigned long val = 0;
-    char *str, *f, *buf0;
-    unsigned char *p;
-    char num[32];
-    time_t t;
-    u_int32_t ip;
-    static char hexchars[] = "0123456789abcdef";
-    struct buffer_info bufinfo;
-
-    buf0 = buf;
-    --buflen;
-    while (buflen > 0) {
-	for (f = fmt; *f != '%' && *f != 0; ++f)
-	    ;
-	if (f > fmt) {
-	    len = f - fmt;
-	    if (len > buflen)
-		len = buflen;
-	    memcpy(buf, fmt, len);
-	    buf += len;
-	    buflen -= len;
-	    fmt = f;
-	}
-	if (*fmt == 0)
-	    break;
-	c = *++fmt;
-	width = 0;
-	prec = -1;
-	fillch = ' ';
-	if (c == '0') {
-	    fillch = '0';
-	    c = *++fmt;
-	}
-	if (c == '*') {
-	    width = va_arg(args, int);
-	    c = *++fmt;
-	} else {
-	    while (isdigit(c)) {
-		width = width * 10 + c - '0';
-		c = *++fmt;
-	    }
-	}
-	if (c == '.') {
-	    c = *++fmt;
-	    if (c == '*') {
-		prec = va_arg(args, int);
-		c = *++fmt;
-	    } else {
-		prec = 0;
-		while (isdigit(c)) {
-		    prec = prec * 10 + c - '0';
-		    c = *++fmt;
-		}
-	    }
-	}
-	str = 0;
-	base = 0;
-	neg = 0;
-	++fmt;
-	switch (c) {
-	case 'd':
-	    i = va_arg(args, int);
-	    if (i < 0) {
-		neg = 1;
-		val = -i;
-	    } else
-		val = i;
-	    base = 10;
-	    break;
-	case 'u':
-	    val = va_arg(args, unsigned int);
-	    base = 10;
-	    break;
-	case 'o':
-	    val = va_arg(args, unsigned int);
-	    base = 8;
-	    break;
-	case 'x':
-	case 'X':
-	    val = va_arg(args, unsigned int);
-	    base = 16;
-	    break;
-	case 'p':
-	    val = (unsigned long) va_arg(args, void *);
-	    base = 16;
-	    neg = 2;
-	    break;
-	case 's':
-	    str = va_arg(args, char *);
-	    break;
-	case 'c':
-	    num[0] = va_arg(args, int);
-	    num[1] = 0;
-	    str = num;
-	    break;
-	case 'm':
-	    str = strerror(errno);
-	    break;
-	case 'I':
-	    ip = va_arg(args, u_int32_t);
-	    ip = ntohl(ip);
-	    slprintf(num, sizeof(num), "%d.%d.%d.%d", (ip >> 24) & 0xff,
-		     (ip >> 16) & 0xff, (ip >> 8) & 0xff, ip & 0xff);
-	    str = num;
-	    break;
-	case 'r':
-	    f = va_arg(args, char *);
-#ifndef __powerpc__
-	    n = vslprintf(buf, buflen + 1, f, va_arg(args, va_list));
-#else
-	    /* On the powerpc, a va_list is an array of 1 structure */
-	    n = vslprintf(buf, buflen + 1, f, va_arg(args, void *));
-#endif
-	    buf += n;
-	    buflen -= n;
-	    continue;
-	case 't':
-	    time(&t);
-	    str = ctime(&t);
-	    str += 4;		/* chop off the day name */
-	    str[15] = 0;	/* chop off year and newline */
-	    break;
-	case 'v':		/* "visible" string */
-	case 'q':		/* quoted string */
-	    quoted = c == 'q';
-	    p = va_arg(args, unsigned char *);
-	    if (fillch == '0' && prec >= 0) {
-		n = prec;
-	    } else {
-		n = strlen((char *)p);
-		if (prec >= 0 && n > prec)
-		    n = prec;
-	    }
-	    while (n > 0 && buflen > 0) {
-		c = *p++;
-		--n;
-		if (!quoted && c >= 0x80) {
-		    OUTCHAR('M');
-		    OUTCHAR('-');
-		    c -= 0x80;
-		}
-		if (quoted && (c == '"' || c == '\\'))
-		    OUTCHAR('\\');
-		if (c < 0x20 || (0x7f <= c && c < 0xa0)) {
-		    if (quoted) {
-			OUTCHAR('\\');
-			switch (c) {
-			case '\t':	OUTCHAR('t');	break;
-			case '\n':	OUTCHAR('n');	break;
-			case '\b':	OUTCHAR('b');	break;
-			case '\f':	OUTCHAR('f');	break;
-			default:
-			    OUTCHAR('x');
-			    OUTCHAR(hexchars[c >> 4]);
-			    OUTCHAR(hexchars[c & 0xf]);
-			}
-		    } else {
-			if (c == '\t')
-			    OUTCHAR(c);
-			else {
-			    OUTCHAR('^');
-			    OUTCHAR(c ^ 0x40);
-			}
-		    }
-		} else
-		    OUTCHAR(c);
-	    }
-	    continue;
-	case 'P':		/* print PPP packet */
-	    bufinfo.ptr = buf;
-	    bufinfo.len = buflen + 1;
-	    p = va_arg(args, unsigned char *);
-	    n = va_arg(args, int);
-	    format_packet(p, n, vslp_printer, &bufinfo);
-	    buf = bufinfo.ptr;
-	    buflen = bufinfo.len - 1;
-	    continue;
-	case 'B':
-	    p = va_arg(args, unsigned char *);
-	    for (n = prec; n > 0; --n) {
-		c = *p++;
-		if (fillch == ' ')
-		    OUTCHAR(' ');
-		OUTCHAR(hexchars[(c >> 4) & 0xf]);
-		OUTCHAR(hexchars[c & 0xf]);
-	    }
-	    continue;
-	default:
-	    *buf++ = '%';
-	    if (c != '%')
-		--fmt;		/* so %z outputs %z etc. */
-	    --buflen;
-	    continue;
-	}
-	if (base != 0) {
-	    str = num + sizeof(num);
-	    *--str = 0;
-	    while (str > num + neg) {
-		*--str = hexchars[val % base];
-		val = val / base;
-		if (--prec <= 0 && val == 0)
-		    break;
-	    }
-	    switch (neg) {
-	    case 1:
-		*--str = '-';
-		break;
-	    case 2:
-		*--str = 'x';
-		*--str = '0';
-		break;
-	    }
-	    len = num + sizeof(num) - 1 - str;
-	} else {
-	    len = strlen(str);
-	    if (prec >= 0 && len > prec)
-		len = prec;
-	}
-	if (width > 0) {
-	    if (width > buflen)
-		width = buflen;
-	    if ((n = width - len) > 0) {
-		buflen -= n;
-		for (; n > 0; --n)
-		    *buf++ = fillch;
-	    }
-	}
-	if (len > buflen)
-	    len = buflen;
-	memcpy(buf, str, len);
-	buf += len;
-	buflen -= len;
-    }
-    *buf = 0;
-    return buf - buf0;
-}
-
-/*
- * vslp_printer - used in processing a %P format
- */
-static void
-vslp_printer __V((void *arg, char *fmt, ...))
-{
-    int n;
-    va_list pvar;
-    struct buffer_info *bi;
-
-#if defined(__STDC__)
-    va_start(pvar, fmt);
-#else
-    void *arg;
-    char *fmt;
-    va_start(pvar);
-    arg = va_arg(pvar, void *);
-    fmt = va_arg(pvar, char *);
-#endif
-
-    bi = (struct buffer_info *) arg;
-    n = vslprintf(bi->ptr, bi->len, fmt, pvar);
-    va_end(pvar);
-
-    bi->ptr += n;
-    bi->len -= n;
-}
-
-#ifdef unused
-/*
- * log_packet - format a packet and log it.
- */
-
-void
-log_packet(p, len, prefix, level)
-    u_char *p;
-    int len;
-    char *prefix;
-    int level;
-{
-	init_pr_log(prefix, level);
-	format_packet(p, len, pr_log, &level);
-	end_pr_log();
-}
-#endif /* unused */
-
-/*
- * format_packet - make a readable representation of a packet,
- * calling `printer(arg, format, ...)' to output it.
- */
-static void
-format_packet(p, len, printer, arg)
-    u_char *p;
-    int len;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int i, n;
-    u_short proto;
-    struct protent *protp;
-
-    if (len >= PPP_HDRLEN && p[0] == PPP_ALLSTATIONS && p[1] == PPP_UI) {
-	p += 2;
-	GETSHORT(proto, p);
-	len -= PPP_HDRLEN;
-	for (i = 0; (protp = protocols[i]) != NULL; ++i)
-	    if (proto == protp->protocol)
-		break;
-	if (protp != NULL) {
-	    printer(arg, "[%s", protp->name);
-	    n = (*protp->printpkt)(p, len, printer, arg);
-	    printer(arg, "]");
-	    p += n;
-	    len -= n;
-	} else {
-	    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-		if (proto == (protp->protocol & ~0x8000))
-		    break;
-	    if (protp != 0 && protp->data_name != 0) {
-		printer(arg, "[%s data]", protp->data_name);
-		if (len > 8)
-		    printer(arg, "%.8B ...", p);
-		else
-		    printer(arg, "%.*B", len, p);
-		len = 0;
-	    } else
-		printer(arg, "[proto=0x%x]", proto);
-	}
-    }
-
-    if (len > 32)
-	printer(arg, "%.32B ...", p);
-    else
-	printer(arg, "%.*B", len, p);
-}
-
-/*
- * init_pr_log, end_pr_log - initialize and finish use of pr_log.
- */
-
-static char line[256];		/* line to be logged accumulated here */
-static char *linep;		/* current pointer within line */
-static int llevel;		/* level for logging */
-
-void
-init_pr_log(prefix, level)
-     char *prefix;
-     int level;
-{
-	linep = line;
-	if (prefix != NULL) {
-		strlcpy(line, prefix, sizeof(line));
-		linep = line + strlen(line);
-	}
-	llevel = level;
-}
-
-void
-end_pr_log()
-{
-	if (linep != line) {
-		*linep = 0;
-		log_write(llevel, line);
-	}
-}
-
-/*
- * pr_log - printer routine for outputting to syslog
- */
-void
-pr_log __V((void *arg, char *fmt, ...))
-{
-	int l, n;
-	va_list pvar;
-	char *p, *eol;
-	char buf[256];
-
-#if defined(__STDC__)
-	va_start(pvar, fmt);
-#else
-	void *arg;
-	char *fmt;
-	va_start(pvar);
-	arg = va_arg(pvar, void *);
-	fmt = va_arg(pvar, char *);
-#endif
-
-	n = vslprintf(buf, sizeof(buf), fmt, pvar);
-	va_end(pvar);
-
-	p = buf;
-	eol = strchr(buf, '\n');
-	if (linep != line) {
-		l = (eol == NULL)? n: eol - buf;
-		if (linep + l < line + sizeof(line)) {
-			if (l > 0) {
-				memcpy(linep, buf, l);
-				linep += l;
-			}
-			if (eol == NULL)
-				return;
-			p = eol + 1;
-			eol = strchr(p, '\n');
-		}
-		*linep = 0;
-		log_write(llevel, line);
-		linep = line;
-	}
-
-	while (eol != NULL) {
-		*eol = 0;
-		log_write(llevel, p);
-		p = eol + 1;
-		eol = strchr(p, '\n');
-	}
-
-	/* assumes sizeof(buf) <= sizeof(line) */
-	l = buf + n - p;
-	if (l > 0) {
-		memcpy(line, p, n);
-		linep = line + l;
-	}
-}
-
-/*
- * print_string - print a readable representation of a string using
- * printer.
- */
-void
-print_string(p, len, printer, arg)
-    char *p;
-    int len;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int c;
-
-    printer(arg, "\"");
-    for (; len > 0; --len) {
-	c = *p++;
-	if (' ' <= c && c <= '~') {
-	    if (c == '\\' || c == '"')
-		printer(arg, "\\");
-	    printer(arg, "%c", c);
-	} else {
-	    switch (c) {
-	    case '\n':
-		printer(arg, "\\n");
-		break;
-	    case '\r':
-		printer(arg, "\\r");
-		break;
-	    case '\t':
-		printer(arg, "\\t");
-		break;
-	    default:
-		printer(arg, "\\%.3o", c);
-	    }
-	}
-    }
-    printer(arg, "\"");
-}
-
-/*
- * logit - does the hard work for fatal et al.
- */
-static void
-logit(level, fmt, args)
-    int level;
-    char *fmt;
-    va_list args;
-{
-    int n;
-    char buf[1024];
-
-    n = vslprintf(buf, sizeof(buf), fmt, args);
-    log_write(level, buf);
-}
-
-static void
-log_write(level, buf)
-    int level;
-    char *buf;
-{
-    syslog(level, "%s", buf);
-    if (log_to_fd >= 0 && (level != LOG_DEBUG || debug)) {
-	int n = strlen(buf);
-
-	if (n > 0 && buf[n-1] == '\n')
-	    --n;
-	if (write(log_to_fd, buf, n) != n
-	    || write(log_to_fd, "\n", 1) != 1)
-	    log_to_fd = -1;
-    }
-}
-
-/*
- * fatal - log an error message and die horribly.
- */
-void
-fatal __V((char *fmt, ...))
-{
-    va_list pvar;
-
-#if defined(__STDC__)
-    va_start(pvar, fmt);
-#else
-    char *fmt;
-    va_start(pvar);
-    fmt = va_arg(pvar, char *);
-#endif
-
-    logit(LOG_ERR, fmt, pvar);
-    va_end(pvar);
-
-    die(1);			/* as promised */
-}
-
-/*
- * error - log an error message.
- */
-void
-error __V((char *fmt, ...))
-{
-    va_list pvar;
-
-#if defined(__STDC__)
-    va_start(pvar, fmt);
-#else
-    char *fmt;
-    va_start(pvar);
-    fmt = va_arg(pvar, char *);
-#endif
-
-    logit(LOG_ERR, fmt, pvar);
-    va_end(pvar);
-}
-
-/*
- * warn - log a warning message.
- */
-void
-warn __V((char *fmt, ...))
-{
-    va_list pvar;
-
-#if defined(__STDC__)
-    va_start(pvar, fmt);
-#else
-    char *fmt;
-    va_start(pvar);
-    fmt = va_arg(pvar, char *);
-#endif
-
-    logit(LOG_WARNING, fmt, pvar);
-    va_end(pvar);
-}
-
-/*
- * notice - log a notice-level message.
- */
-void
-notice __V((char *fmt, ...))
-{
-    va_list pvar;
-
-#if defined(__STDC__)
-    va_start(pvar, fmt);
-#else
-    char *fmt;
-    va_start(pvar);
-    fmt = va_arg(pvar, char *);
-#endif
-
-    logit(LOG_NOTICE, fmt, pvar);
-    va_end(pvar);
-}
-
-/*
- * info - log an informational message.
- */
-void
-info __V((char *fmt, ...))
-{
-    va_list pvar;
-
-#if defined(__STDC__)
-    va_start(pvar, fmt);
-#else
-    char *fmt;
-    va_start(pvar);
-    fmt = va_arg(pvar, char *);
-#endif
-
-    logit(LOG_INFO, fmt, pvar);
-    va_end(pvar);
-}
-
-/*
- * dbglog - log a debug message.
- */
-void
-dbglog __V((char *fmt, ...))
-{
-    va_list pvar;
-
-#if defined(__STDC__)
-    va_start(pvar, fmt);
-#else
-    char *fmt;
-    va_start(pvar);
-    fmt = va_arg(pvar, char *);
-#endif
-
-    logit(LOG_DEBUG, fmt, pvar);
-    va_end(pvar);
-}
-
-/* Procedures for locking the serial device using a lock file. */
-#ifndef LOCK_DIR
-#ifdef _linux_
-#define LOCK_DIR	"/var/lock"
-#else
-#ifdef SVR4
-#define LOCK_DIR	"/var/spool/locks"
-#else
-#define LOCK_DIR	"/var/spool/lock"
-#endif
-#endif
-#endif /* LOCK_DIR */
-
-static char lock_file[MAXPATHLEN];
-
-/*
- * lock - create a lock file for the named device
- */
-int
-lock(dev)
-    char *dev;
-{
-#ifdef LOCKLIB
-    int result;
-
-    result = mklock (dev, (void *) 0);
-    if (result == 0) {
-	strlcpy(lock_file, sizeof(lock_file), dev);
-	return 0;
-    }
-
-    if (result > 0)
-        notice("Device %s is locked by pid %d", dev, result);
-    else
-	error("Can't create lock file %s", lock_file);
-    return -1;
-
-#else /* LOCKLIB */
-
-    char lock_buffer[12];
-    int fd, pid, n;
-
-#ifdef SVR4
-    struct stat sbuf;
-
-    if (stat(dev, &sbuf) < 0) {
-	error("Can't get device number for %s: %m", dev);
-	return -1;
-    }
-    if ((sbuf.st_mode & S_IFMT) != S_IFCHR) {
-	error("Can't lock %s: not a character device", dev);
-	return -1;
-    }
-    slprintf(lock_file, sizeof(lock_file), "%s/LK.%03d.%03d.%03d",
-	     LOCK_DIR, major(sbuf.st_dev),
-	     major(sbuf.st_rdev), minor(sbuf.st_rdev));
-#else
-    char *p;
-
-    if ((p = strrchr(dev, '/')) != NULL)
-	dev = p + 1;
-    slprintf(lock_file, sizeof(lock_file), "%s/LCK..%s", LOCK_DIR, dev);
-#endif
-
-    while ((fd = open(lock_file, O_EXCL | O_CREAT | O_RDWR, 0644)) < 0) {
-	if (errno != EEXIST) {
-	    error("Can't create lock file %s: %m", lock_file);
-	    break;
-	}
-
-	/* Read the lock file to find out who has the device locked. */
-	fd = open(lock_file, O_RDONLY, 0);
-	if (fd < 0) {
-	    if (errno == ENOENT) /* This is just a timing problem. */
-		continue;
-	    error("Can't open existing lock file %s: %m", lock_file);
-	    break;
-	}
-#ifndef LOCK_BINARY
-	n = read(fd, lock_buffer, 11);
-#else
-	n = read(fd, &pid, sizeof(pid));
-#endif /* LOCK_BINARY */
-	close(fd);
-	fd = -1;
-	if (n <= 0) {
-	    error("Can't read pid from lock file %s", lock_file);
-	    break;
-	}
-
-	/* See if the process still exists. */
-#ifndef LOCK_BINARY
-	lock_buffer[n] = 0;
-	pid = atoi(lock_buffer);
-#endif /* LOCK_BINARY */
-	if (pid == getpid())
-	    return 1;		/* somebody else locked it for us */
-	if (pid == 0
-	    || (kill(pid, 0) == -1 && errno == ESRCH)) {
-	    if (unlink (lock_file) == 0) {
-		notice("Removed stale lock on %s (pid %d)", dev, pid);
-		continue;
-	    }
-	    warn("Couldn't remove stale lock on %s", dev);
-	} else
-	    notice("Device %s is locked by pid %d", dev, pid);
-	break;
-    }
-
-    if (fd < 0) {
-	lock_file[0] = 0;
-	return -1;
-    }
-
-    pid = getpid();
-#ifndef LOCK_BINARY
-    slprintf(lock_buffer, sizeof(lock_buffer), "%10d\n", pid);
-    write (fd, lock_buffer, 11);
-#else
-    write(fd, &pid, sizeof (pid));
-#endif
-    close(fd);
-    return 0;
-
-#endif
-}
-
-/*
- * relock - called to update our lockfile when we are about to detach,
- * thus changing our pid (we fork, the child carries on, and the parent dies).
- * Note that this is called by the parent, with pid equal to the pid
- * of the child.  This avoids a potential race which would exist if
- * we had the child rewrite the lockfile (the parent might die first,
- * and another process could think the lock was stale if it checked
- * between when the parent died and the child rewrote the lockfile).
- */
-int
-relock(pid)
-    int pid;
-{
-#ifdef LOCKLIB
-    /* XXX is there a way to do this? */
-    return -1;
-#else /* LOCKLIB */
-
-    int fd;
-    char lock_buffer[12];
-
-    if (lock_file[0] == 0)
-	return -1;
-    fd = open(lock_file, O_WRONLY, 0);
-    if (fd < 0) {
-	error("Couldn't reopen lock file %s: %m", lock_file);
-	lock_file[0] = 0;
-	return -1;
-    }
-
-#ifndef LOCK_BINARY
-    slprintf(lock_buffer, sizeof(lock_buffer), "%10d\n", pid);
-    write (fd, lock_buffer, 11);
-#else
-    write(fd, &pid, sizeof(pid));
-#endif /* LOCK_BINARY */
-    close(fd);
-    return 0;
-
-#endif /* LOCKLIB */
-}
-
-/*
- * unlock - remove our lockfile
- */
-void
-unlock()
-{
-    if (lock_file[0]) {
-#ifdef LOCKLIB
-	(void) rmlock(lock_file, (void *) 0);
-#else
-	unlink(lock_file);
-#endif
-	lock_file[0] = 0;
-    }
-}
-
diff --git a/mdk-stage1/ppp/pppdump/Makefile.linux b/mdk-stage1/ppp/pppdump/Makefile.linux
deleted file mode 100644
index 1d8d78ff7..000000000
--- a/mdk-stage1/ppp/pppdump/Makefile.linux
+++ /dev/null
@@ -1,17 +0,0 @@
-CFLAGS=  -I../include/net $(RPM_OPT_FLAGS)
-OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-
-INSTALL= install
-
-all:	pppdump
-
-pppdump: $(OBJS)
-	$(CC) $(RPM_OPT_FLAGS) -o pppdump $(OBJS)
-
-clean:
-	rm -f pppdump $(OBJS) *~
-
-install:
-	mkdir -p $(BINDIR) $(MANDIR)/man8
-	$(INSTALL) -s -c pppdump $(BINDIR)
-	$(INSTALL) -c pppdump.8 $(MANDIR)/man8
diff --git a/mdk-stage1/ppp/pppdump/Makefile.linux.makeopt b/mdk-stage1/ppp/pppdump/Makefile.linux.makeopt
deleted file mode 100644
index d02fecde8..000000000
--- a/mdk-stage1/ppp/pppdump/Makefile.linux.makeopt
+++ /dev/null
@@ -1,17 +0,0 @@
-CFLAGS= -O -I../include/net
-OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-
-INSTALL= install
-
-all:	pppdump
-
-pppdump: $(OBJS)
-	$(CC) -o pppdump $(OBJS)
-
-clean:
-	rm -f pppdump $(OBJS) *~
-
-install:
-	mkdir -p $(BINDIR) $(MANDIR)/man8
-	$(INSTALL) -s -c pppdump $(BINDIR)
-	$(INSTALL) -c -m 444 pppdump.8 $(MANDIR)/man8
diff --git a/mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile b/mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile
deleted file mode 100644
index 4c98b6c6d..000000000
--- a/mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-CFLAGS= -O -I../include/net
-OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-
-INSTALL= install
-
-all:	pppdump
-
-pppdump: $(OBJS)
-	$(CC) $(RPM_OPT_FLAGS) -o pppdump $(OBJS)
-
-clean:
-	rm -f pppdump $(OBJS) *~
-
-install:
-	mkdir -p $(BINDIR) $(MANDIR)/man8
-	$(INSTALL) -s -c pppdump $(BINDIR)
-	$(INSTALL) -c -m 444 pppdump.8 $(MANDIR)/man8
diff --git a/mdk-stage1/ppp/pppdump/Makefile.sol2 b/mdk-stage1/ppp/pppdump/Makefile.sol2
deleted file mode 100644
index d7e6b413e..000000000
--- a/mdk-stage1/ppp/pppdump/Makefile.sol2
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# pppdump Makefile for SVR4 systems
-# $Id$
-#
-
-include ../solaris/Makedefs
-
-CFLAGS= $(COPTS) -I../include/net
-OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-
-all:	pppdump
-
-pppdump: $(OBJS)
-	$(CC) -o pppdump $(OBJS)
-
-clean:
-	rm -f $(OBJS) pppdump *~
-
-install:
-	$(INSTALL) -f $(BINDIR) pppdump
-	$(INSTALL) -m 444 -f $(MANDIR)/man8 pppdump.8
diff --git a/mdk-stage1/ppp/pppdump/Makefile.sunos4 b/mdk-stage1/ppp/pppdump/Makefile.sunos4
deleted file mode 100644
index 915c8267d..000000000
--- a/mdk-stage1/ppp/pppdump/Makefile.sunos4
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# pppstats makefile
-# $Id$
-#
-
-include ../sunos4/Makedefs
-
-OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-CFLAGS = $(COPTS) -I../include/net
-
-all:	pppdump
-
-pppdump: $(OBJS)
-	$(CC) -o pppdump $(OBJS)
-
-clean:
-	rm -f pppdump $(OBJS) *~
-
-install: pppdump
-	$(INSTALL) -c pppdump $(BINDIR)/pppdump
-	$(INSTALL) -c -m 444 pppdump.8 $(MANDIR)/man8/pppdump.8
diff --git a/mdk-stage1/ppp/pppdump/bsd-comp.c b/mdk-stage1/ppp/pppdump/bsd-comp.c
deleted file mode 100644
index 1e14e98bb..000000000
--- a/mdk-stage1/ppp/pppdump/bsd-comp.c
+++ /dev/null
@@ -1,750 +0,0 @@
-/* Because this code is derived from the 4.3BSD compress source:
- *
- *
- * Copyright (c) 1985, 1986 The Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * James A. Woods, derived from original work by Spencer Thomas
- * and Joseph Orost.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * $Id$
- */
-
-#include <sys/types.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include "ppp_defs.h"
-#include "ppp-comp.h"
-
-#if DO_BSD_COMPRESS
-
-/*
- * PPP "BSD compress" compression
- *  The differences between this compression and the classic BSD LZW
- *  source are obvious from the requirement that the classic code worked
- *  with files while this handles arbitrarily long streams that
- *  are broken into packets.  They are:
- *
- *	When the code size expands, a block of junk is not emitted by
- *	    the compressor and not expected by the decompressor.
- *
- *	New codes are not necessarily assigned every time an old
- *	    code is output by the compressor.  This is because a packet
- *	    end forces a code to be emitted, but does not imply that a
- *	    new sequence has been seen.
- *
- *	The compression ratio is checked at the first end of a packet
- *	    after the appropriate gap.	Besides simplifying and speeding
- *	    things up, this makes it more likely that the transmitter
- *	    and receiver will agree when the dictionary is cleared when
- *	    compression is not going well.
- */
-
-/*
- * A dictionary for doing BSD compress.
- */
-struct bsd_db {
-    int	    totlen;			/* length of this structure */
-    u_int   hsize;			/* size of the hash table */
-    u_char  hshift;			/* used in hash function */
-    u_char  n_bits;			/* current bits/code */
-    u_char  maxbits;
-    u_char  debug;
-    u_char  unit;
-    u_short seqno;			/* sequence number of next packet */
-    u_int   hdrlen;			/* header length to preallocate */
-    u_int   mru;
-    u_int   maxmaxcode;			/* largest valid code */
-    u_int   max_ent;			/* largest code in use */
-    u_int   in_count;			/* uncompressed bytes, aged */
-    u_int   bytes_out;			/* compressed bytes, aged */
-    u_int   ratio;			/* recent compression ratio */
-    u_int   checkpoint;			/* when to next check the ratio */
-    u_int   clear_count;		/* times dictionary cleared */
-    u_int   incomp_count;		/* incompressible packets */
-    u_int   incomp_bytes;		/* incompressible bytes */
-    u_int   uncomp_count;		/* uncompressed packets */
-    u_int   uncomp_bytes;		/* uncompressed bytes */
-    u_int   comp_count;			/* compressed packets */
-    u_int   comp_bytes;			/* compressed bytes */
-    u_short *lens;			/* array of lengths of codes */
-    struct bsd_dict {
-	union {				/* hash value */
-	    u_int32_t	fcode;
-	    struct {
-#ifdef BSD_LITTLE_ENDIAN
-		u_short prefix;		/* preceding code */
-		u_char	suffix;		/* last character of new code */
-		u_char	pad;
-#else
-		u_char	pad;
-		u_char	suffix;		/* last character of new code */
-		u_short prefix;		/* preceding code */
-#endif
-	    } hs;
-	} f;
-	u_short codem1;			/* output of hash table -1 */
-	u_short cptr;			/* map code to hash table entry */
-    } dict[1];
-};
-
-#define BSD_OVHD	2		/* BSD compress overhead/packet */
-#define BSD_INIT_BITS	BSD_MIN_BITS
-
-static void	*bsd_decomp_alloc __P((u_char *options, int opt_len));
-static void	bsd_free __P((void *state));
-static int	bsd_decomp_init __P((void *state, u_char *options, int opt_len,
-				     int unit, int hdrlen, int mru, int debug));
-static void	bsd_incomp __P((void *state, u_char *dmsg, int len));
-static int	bsd_decompress __P((void *state, u_char *cmp, int inlen,
-				    u_char *dmp, int *outlen));
-static void	bsd_reset __P((void *state));
-static void	bsd_comp_stats __P((void *state, struct compstat *stats));
-
-/*
- * Exported procedures.
- */
-struct compressor ppp_bsd_compress = {
-    CI_BSD_COMPRESS,		/* compress_proto */
-    bsd_decomp_alloc,		/* decomp_alloc */
-    bsd_free,			/* decomp_free */
-    bsd_decomp_init,		/* decomp_init */
-    bsd_reset,			/* decomp_reset */
-    bsd_decompress,		/* decompress */
-    bsd_incomp,			/* incomp */
-    bsd_comp_stats,		/* decomp_stat */
-};
-
-/*
- * the next two codes should not be changed lightly, as they must not
- * lie within the contiguous general code space.
- */
-#define CLEAR	256			/* table clear output code */
-#define FIRST	257			/* first free entry */
-#define LAST	255
-
-#define MAXCODE(b)	((1 << (b)) - 1)
-#define BADCODEM1	MAXCODE(BSD_MAX_BITS)
-
-#define BSD_HASH(prefix,suffix,hshift)	((((u_int32_t)(suffix)) << (hshift)) \
-					 ^ (u_int32_t)(prefix))
-#define BSD_KEY(prefix,suffix)		((((u_int32_t)(suffix)) << 16) \
-					 + (u_int32_t)(prefix))
-
-#define CHECK_GAP	10000		/* Ratio check interval */
-
-#define RATIO_SCALE_LOG	8
-#define RATIO_SCALE	(1<<RATIO_SCALE_LOG)
-#define RATIO_MAX	(0x7fffffff>>RATIO_SCALE_LOG)
-
-/*
- * clear the dictionary
- */
-static void
-bsd_clear(db)
-    struct bsd_db *db;
-{
-    db->clear_count++;
-    db->max_ent = FIRST-1;
-    db->n_bits = BSD_INIT_BITS;
-    db->ratio = 0;
-    db->bytes_out = 0;
-    db->in_count = 0;
-    db->checkpoint = CHECK_GAP;
-}
-
-/*
- * If the dictionary is full, then see if it is time to reset it.
- *
- * Compute the compression ratio using fixed-point arithmetic
- * with 8 fractional bits.
- *
- * Since we have an infinite stream instead of a single file,
- * watch only the local compression ratio.
- *
- * Since both peers must reset the dictionary at the same time even in
- * the absence of CLEAR codes (while packets are incompressible), they
- * must compute the same ratio.
- */
-static int				/* 1=output CLEAR */
-bsd_check(db)
-    struct bsd_db *db;
-{
-    u_int new_ratio;
-
-    if (db->in_count >= db->checkpoint) {
-	/* age the ratio by limiting the size of the counts */
-	if (db->in_count >= RATIO_MAX
-	    || db->bytes_out >= RATIO_MAX) {
-	    db->in_count -= db->in_count/4;
-	    db->bytes_out -= db->bytes_out/4;
-	}
-
-	db->checkpoint = db->in_count + CHECK_GAP;
-
-	if (db->max_ent >= db->maxmaxcode) {
-	    /* Reset the dictionary only if the ratio is worse,
-	     * or if it looks as if it has been poisoned
-	     * by incompressible data.
-	     *
-	     * This does not overflow, because
-	     *	db->in_count <= RATIO_MAX.
-	     */
-	    new_ratio = db->in_count << RATIO_SCALE_LOG;
-	    if (db->bytes_out != 0)
-		new_ratio /= db->bytes_out;
-
-	    if (new_ratio < db->ratio || new_ratio < 1 * RATIO_SCALE) {
-		bsd_clear(db);
-		return 1;
-	    }
-	    db->ratio = new_ratio;
-	}
-    }
-    return 0;
-}
-
-/*
- * Return statistics.
- */
-static void
-bsd_comp_stats(state, stats)
-    void *state;
-    struct compstat *stats;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-    u_int out;
-
-    stats->unc_bytes = db->uncomp_bytes;
-    stats->unc_packets = db->uncomp_count;
-    stats->comp_bytes = db->comp_bytes;
-    stats->comp_packets = db->comp_count;
-    stats->inc_bytes = db->incomp_bytes;
-    stats->inc_packets = db->incomp_count;
-    stats->ratio = db->in_count;
-    out = db->bytes_out;
-    if (stats->ratio <= 0x7fffff)
-	stats->ratio <<= 8;
-    else
-	out >>= 8;
-    if (out != 0)
-	stats->ratio /= out;
-}
-
-/*
- * Reset state, as on a CCP ResetReq.
- */
-static void
-bsd_reset(state)
-    void *state;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-
-    db->seqno = 0;
-    bsd_clear(db);
-    db->clear_count = 0;
-}
-
-/*
- * Allocate space for a (de) compressor.
- */
-static void *
-bsd_alloc(options, opt_len, decomp)
-    u_char *options;
-    int opt_len, decomp;
-{
-    int bits;
-    u_int newlen, hsize, hshift, maxmaxcode;
-    struct bsd_db *db;
-
-    if (opt_len != 3 || options[0] != CI_BSD_COMPRESS || options[1] != 3
-	|| BSD_VERSION(options[2]) != BSD_CURRENT_VERSION)
-	return NULL;
-
-    bits = BSD_NBITS(options[2]);
-    switch (bits) {
-    case 9:			/* needs 82152 for both directions */
-    case 10:			/* needs 84144 */
-    case 11:			/* needs 88240 */
-    case 12:			/* needs 96432 */
-	hsize = 5003;
-	hshift = 4;
-	break;
-    case 13:			/* needs 176784 */
-	hsize = 9001;
-	hshift = 5;
-	break;
-    case 14:			/* needs 353744 */
-	hsize = 18013;
-	hshift = 6;
-	break;
-    case 15:			/* needs 691440 */
-	hsize = 35023;
-	hshift = 7;
-	break;
-    case 16:			/* needs 1366160--far too much, */
-	/* hsize = 69001; */	/* and 69001 is too big for cptr */
-	/* hshift = 8; */	/* in struct bsd_db */
-	/* break; */
-    default:
-	return NULL;
-    }
-
-    maxmaxcode = MAXCODE(bits);
-    newlen = sizeof(*db) + (hsize-1) * (sizeof(db->dict[0]));
-    db = (struct bsd_db *) malloc(newlen);
-    if (!db)
-	return NULL;
-    memset(db, 0, sizeof(*db) - sizeof(db->dict));
-
-    if (!decomp) {
-	db->lens = NULL;
-    } else {
-	db->lens = (u_short *) malloc((maxmaxcode+1) * sizeof(db->lens[0]));
-	if (!db->lens) {
-	    free(db);
-	    return NULL;
-	}
-    }
-
-    db->totlen = newlen;
-    db->hsize = hsize;
-    db->hshift = hshift;
-    db->maxmaxcode = maxmaxcode;
-    db->maxbits = bits;
-
-    return (void *) db;
-}
-
-static void
-bsd_free(state)
-    void *state;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-
-    if (db->lens)
-	free(db->lens);
-    free(db);
-}
-
-static void *
-bsd_decomp_alloc(options, opt_len)
-    u_char *options;
-    int opt_len;
-{
-    return bsd_alloc(options, opt_len, 1);
-}
-
-/*
- * Initialize the database.
- */
-static int
-bsd_init(db, options, opt_len, unit, hdrlen, mru, debug, decomp)
-    struct bsd_db *db;
-    u_char *options;
-    int opt_len, unit, hdrlen, mru, debug, decomp;
-{
-    int i;
-
-    if (opt_len < CILEN_BSD_COMPRESS
-	|| options[0] != CI_BSD_COMPRESS || options[1] != CILEN_BSD_COMPRESS
-	|| BSD_VERSION(options[2]) != BSD_CURRENT_VERSION
-	|| BSD_NBITS(options[2]) != db->maxbits
-	|| decomp && db->lens == NULL)
-	return 0;
-
-    if (decomp) {
-	i = LAST+1;
-	while (i != 0)
-	    db->lens[--i] = 1;
-    }
-    i = db->hsize;
-    while (i != 0) {
-	db->dict[--i].codem1 = BADCODEM1;
-	db->dict[i].cptr = 0;
-    }
-
-    db->unit = unit;
-    db->hdrlen = hdrlen;
-    db->mru = mru;
-    if (debug)
-	db->debug = 1;
-
-    bsd_reset(db);
-
-    return 1;
-}
-
-static int
-bsd_decomp_init(state, options, opt_len, unit, hdrlen, mru, debug)
-    void *state;
-    u_char *options;
-    int opt_len, unit, hdrlen, mru, debug;
-{
-    return bsd_init((struct bsd_db *) state, options, opt_len,
-		    unit, hdrlen, mru, debug, 1);
-}
-
-
-/*
- * Update the "BSD Compress" dictionary on the receiver for
- * incompressible data by pretending to compress the incoming data.
- */
-static void
-bsd_incomp(state, dmsg, mlen)
-    void *state;
-    u_char *dmsg;
-    int mlen;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-    u_int hshift = db->hshift;
-    u_int max_ent = db->max_ent;
-    u_int n_bits = db->n_bits;
-    struct bsd_dict *dictp;
-    u_int32_t fcode;
-    u_char c;
-    long hval, disp;
-    int slen, ilen;
-    u_int bitno = 7;
-    u_char *rptr;
-    u_int ent;
-
-    rptr = dmsg;
-    ent = rptr[0];		/* get the protocol */
-    if (ent == 0) {
-	++rptr;
-	--mlen;
-	ent = rptr[0];
-    }
-    if ((ent & 1) == 0 || ent < 0x21 || ent > 0xf9)
-	return;
-
-    db->seqno++;
-    ilen = 1;		/* count the protocol as 1 byte */
-    ++rptr;
-    slen = dmsg + mlen - rptr;
-    ilen += slen;
-    for (; slen > 0; --slen) {
-	c = *rptr++;
-	fcode = BSD_KEY(ent, c);
-	hval = BSD_HASH(ent, c, hshift);
-	dictp = &db->dict[hval];
-
-	/* validate and then check the entry */
-	if (dictp->codem1 >= max_ent)
-	    goto nomatch;
-	if (dictp->f.fcode == fcode) {
-	    ent = dictp->codem1+1;
-	    continue;   /* found (prefix,suffix) */
-	}
-
-	/* continue probing until a match or invalid entry */
-	disp = (hval == 0) ? 1 : hval;
-	do {
-	    hval += disp;
-	    if (hval >= db->hsize)
-		hval -= db->hsize;
-	    dictp = &db->dict[hval];
-	    if (dictp->codem1 >= max_ent)
-		goto nomatch;
-	} while (dictp->f.fcode != fcode);
-	ent = dictp->codem1+1;
-	continue;	/* finally found (prefix,suffix) */
-
-    nomatch:		/* output (count) the prefix */
-	bitno += n_bits;
-
-	/* code -> hashtable */
-	if (max_ent < db->maxmaxcode) {
-	    struct bsd_dict *dictp2;
-	    /* expand code size if needed */
-	    if (max_ent >= MAXCODE(n_bits))
-		db->n_bits = ++n_bits;
-
-	    /* Invalidate previous hash table entry
-	     * assigned this code, and then take it over.
-	     */
-	    dictp2 = &db->dict[max_ent+1];
-	    if (db->dict[dictp2->cptr].codem1 == max_ent)
-		db->dict[dictp2->cptr].codem1 = BADCODEM1;
-	    dictp2->cptr = hval;
-	    dictp->codem1 = max_ent;
-	    dictp->f.fcode = fcode;
-
-	    db->max_ent = ++max_ent;
-	    db->lens[max_ent] = db->lens[ent]+1;
-	}
-	ent = c;
-    }
-    bitno += n_bits;		/* output (count) the last code */
-    db->bytes_out += bitno/8;
-    db->in_count += ilen;
-    (void)bsd_check(db);
-
-    ++db->incomp_count;
-    db->incomp_bytes += ilen;
-    ++db->uncomp_count;
-    db->uncomp_bytes += ilen;
-
-    /* Increase code size if we would have without the packet
-     * boundary and as the decompressor will.
-     */
-    if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode)
-	db->n_bits++;
-}
-
-
-/*
- * Decompress "BSD Compress"
- *
- * Because of patent problems, we return DECOMP_ERROR for errors
- * found by inspecting the input data and for system problems, but
- * DECOMP_FATALERROR for any errors which could possibly be said to
- * be being detected "after" decompression.  For DECOMP_ERROR,
- * we can issue a CCP reset-request; for DECOMP_FATALERROR, we may be
- * infringing a patent of Motorola's if we do, so we take CCP down
- * instead.
- *
- * Given that the frame has the correct sequence number and a good FCS,
- * errors such as invalid codes in the input most likely indicate a
- * bug, so we return DECOMP_FATALERROR for them in order to turn off
- * compression, even though they are detected by inspecting the input.
- */
-static int
-bsd_decompress(state, cmsg, inlen, dmp, outlenp)
-    void *state;
-    u_char *cmsg, *dmp;
-    int inlen, *outlenp;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-    u_int max_ent = db->max_ent;
-    u_int32_t accm = 0;
-    u_int bitno = 32;		/* 1st valid bit in accm */
-    u_int n_bits = db->n_bits;
-    u_int tgtbitno = 32-n_bits;	/* bitno when we have a code */
-    struct bsd_dict *dictp;
-    int explen, i, seq, len;
-    u_int incode, oldcode, finchar;
-    u_char *p, *rptr, *wptr;
-    int ilen;
-    int dlen, space, codelen, extra;
-
-    rptr = cmsg;
-    if (*rptr == 0)
-	++rptr;
-    ++rptr;			/* skip protocol (assumed 0xfd) */
-    seq = (rptr[0] << 8) + rptr[1];
-    rptr += BSD_OVHD;
-    ilen = len = cmsg + inlen - rptr;
-
-    /*
-     * Check the sequence number and give up if it is not what we expect.
-     */
-    if (seq != db->seqno++) {
-	if (db->debug)
-	    printf("bsd_decomp%d: bad sequence # %d, expected %d\n",
-		   db->unit, seq, db->seqno - 1);
-	return DECOMP_ERROR;
-    }
-
-    wptr = dmp + db->hdrlen;
-
-    oldcode = CLEAR;
-    explen = 0;
-    while (len > 0) {
-	/*
-	 * Accumulate bytes until we have a complete code.
-	 * Then get the next code, relying on the 32-bit,
-	 * unsigned accm to mask the result.
-	 */
-	bitno -= 8;
-	accm |= *rptr++ << bitno;
-	--len;
-	if (tgtbitno < bitno)
-	    continue;
-	incode = accm >> tgtbitno;
-	accm <<= n_bits;
-	bitno += n_bits;
-
-	if (incode == CLEAR) {
-	    /*
-	     * The dictionary must only be cleared at
-	     * the end of a packet.  But there could be an
-	     * empty message block at the end.
-	     */
-	    if (len > 0) {
-		if (db->debug)
-		    printf("bsd_decomp%d: bad CLEAR\n", db->unit);
-		return DECOMP_FATALERROR;
-	    }
-	    bsd_clear(db);
-	    explen = ilen = 0;
-	    break;
-	}
-
-	if (incode > max_ent + 2 || incode > db->maxmaxcode
-	    || incode > max_ent && oldcode == CLEAR) {
-	    if (db->debug) {
-		printf("bsd_decomp%d: bad code 0x%x oldcode=0x%x ",
-		       db->unit, incode, oldcode);
-		printf("max_ent=0x%x dlen=%d seqno=%d\n",
-		       max_ent, dlen, db->seqno);
-	    }
-	    return DECOMP_FATALERROR;	/* probably a bug */
-	}
-
-	/* Special case for KwKwK string. */
-	if (incode > max_ent) {
-	    finchar = oldcode;
-	    extra = 1;
-	} else {
-	    finchar = incode;
-	    extra = 0;
-	}
-
-	codelen = db->lens[finchar];
-	explen += codelen + extra;
-	if (explen > db->mru + 1) {
-	    if (db->debug)
-		printf("bsd_decomp%d: ran out of mru\n", db->unit);
-	    return DECOMP_FATALERROR;
-	}
-
-	/*
-	 * Decode this code and install it in the decompressed buffer.
-	 */
-	p = (wptr += codelen);
-	while (finchar > LAST) {
-	    dictp = &db->dict[db->dict[finchar].cptr];
-#ifdef DEBUG
-	    --codelen;
-	    if (codelen <= 0) {
-		printf("bsd_decomp%d: fell off end of chain ", db->unit);
-		printf("0x%x at 0x%x by 0x%x, max_ent=0x%x\n",
-		       incode, finchar, db->dict[finchar].cptr, max_ent);
-		return DECOMP_FATALERROR;
-	    }
-	    if (dictp->codem1 != finchar-1) {
-		printf("bsd_decomp%d: bad code chain 0x%x finchar=0x%x ",
-		       db->unit, incode, finchar);
-		printf("oldcode=0x%x cptr=0x%x codem1=0x%x\n", oldcode,
-		       db->dict[finchar].cptr, dictp->codem1);
-		return DECOMP_FATALERROR;
-	    }
-#endif
-	    *--p = dictp->f.hs.suffix;
-	    finchar = dictp->f.hs.prefix;
-	}
-	*--p = finchar;
-
-#ifdef DEBUG
-	if (--codelen != 0)
-	    printf("bsd_decomp%d: short by %d after code 0x%x, max_ent=0x%x\n",
-		   db->unit, codelen, incode, max_ent);
-#endif
-
-	if (extra)		/* the KwKwK case again */
-	    *wptr++ = finchar;
-
-	/*
-	 * If not first code in a packet, and
-	 * if not out of code space, then allocate a new code.
-	 *
-	 * Keep the hash table correct so it can be used
-	 * with uncompressed packets.
-	 */
-	if (oldcode != CLEAR && max_ent < db->maxmaxcode) {
-	    struct bsd_dict *dictp2;
-	    u_int32_t fcode;
-	    int hval, disp;
-
-	    fcode = BSD_KEY(oldcode,finchar);
-	    hval = BSD_HASH(oldcode,finchar,db->hshift);
-	    dictp = &db->dict[hval];
-
-	    /* look for a free hash table entry */
-	    if (dictp->codem1 < max_ent) {
-		disp = (hval == 0) ? 1 : hval;
-		do {
-		    hval += disp;
-		    if (hval >= db->hsize)
-			hval -= db->hsize;
-		    dictp = &db->dict[hval];
-		} while (dictp->codem1 < max_ent);
-	    }
-
-	    /*
-	     * Invalidate previous hash table entry
-	     * assigned this code, and then take it over
-	     */
-	    dictp2 = &db->dict[max_ent+1];
-	    if (db->dict[dictp2->cptr].codem1 == max_ent) {
-		db->dict[dictp2->cptr].codem1 = BADCODEM1;
-	    }
-	    dictp2->cptr = hval;
-	    dictp->codem1 = max_ent;
-	    dictp->f.fcode = fcode;
-
-	    db->max_ent = ++max_ent;
-	    db->lens[max_ent] = db->lens[oldcode]+1;
-
-	    /* Expand code size if needed. */
-	    if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode) {
-		db->n_bits = ++n_bits;
-		tgtbitno = 32-n_bits;
-	    }
-	}
-	oldcode = incode;
-    }
-    *outlenp = wptr - (dmp + db->hdrlen);
-
-    /*
-     * Keep the checkpoint right so that incompressible packets
-     * clear the dictionary at the right times.
-     */
-    db->bytes_out += ilen;
-    db->in_count += explen;
-    if (bsd_check(db) && db->debug) {
-	printf("bsd_decomp%d: peer should have cleared dictionary\n",
-	       db->unit);
-    }
-
-    ++db->comp_count;
-    db->comp_bytes += ilen + BSD_OVHD;
-    ++db->uncomp_count;
-    db->uncomp_bytes += explen;
-
-    return DECOMP_OK;
-}
-#endif /* DO_BSD_COMPRESS */
diff --git a/mdk-stage1/ppp/pppdump/deflate.c b/mdk-stage1/ppp/pppdump/deflate.c
deleted file mode 100644
index 08e8abc0d..000000000
--- a/mdk-stage1/ppp/pppdump/deflate.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * ppp_deflate.c - interface the zlib procedures for Deflate compression
- * and decompression (as used by gzip) to the PPP code.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-#include <sys/types.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include "ppp_defs.h"
-#include "ppp-comp.h"
-#include "zlib.h"
-
-#if DO_DEFLATE
-
-#define DEFLATE_DEBUG	1
-
-/*
- * State for a Deflate (de)compressor.
- */
-struct deflate_state {
-    int		seqno;
-    int		w_size;
-    int		unit;
-    int		hdrlen;
-    int		mru;
-    int		debug;
-    z_stream	strm;
-    struct compstat stats;
-};
-
-#define DEFLATE_OVHD	2		/* Deflate overhead/packet */
-
-static void	*z_alloc __P((void *, u_int items, u_int size));
-static void	z_free __P((void *, void *ptr, u_int nb));
-static void	*z_decomp_alloc __P((u_char *options, int opt_len));
-static void	z_decomp_free __P((void *state));
-static int	z_decomp_init __P((void *state, u_char *options, int opt_len,
-				     int unit, int hdrlen, int mru, int debug));
-static void	z_incomp __P((void *state, u_char *dmsg, int len));
-static int	z_decompress __P((void *state, u_char *cmp, int inlen,
-				    u_char *dmp, int *outlenp));
-static void	z_decomp_reset __P((void *state));
-static void	z_comp_stats __P((void *state, struct compstat *stats));
-
-/*
- * Procedures exported to if_ppp.c.
- */
-struct compressor ppp_deflate = {
-    CI_DEFLATE,			/* compress_proto */
-    z_decomp_alloc,		/* decomp_alloc */
-    z_decomp_free,		/* decomp_free */
-    z_decomp_init,		/* decomp_init */
-    z_decomp_reset,		/* decomp_reset */
-    z_decompress,		/* decompress */
-    z_incomp,			/* incomp */
-    z_comp_stats,		/* decomp_stat */
-};
-
-/*
- * Space allocation and freeing routines for use by zlib routines.
- */
-static void *
-z_alloc(notused, items, size)
-    void *notused;
-    u_int items, size;
-{
-    return malloc(items * size);
-}
-
-static void
-z_free(notused, ptr, nbytes)
-    void *notused;
-    void *ptr;
-    u_int nbytes;
-{
-    free(ptr);
-}
-
-static void
-z_comp_stats(arg, stats)
-    void *arg;
-    struct compstat *stats;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-    u_int out;
-
-    *stats = state->stats;
-    stats->ratio = stats->unc_bytes;
-    out = stats->comp_bytes + stats->unc_bytes;
-    if (stats->ratio <= 0x7ffffff)
-	stats->ratio <<= 8;
-    else
-	out >>= 8;
-    if (out != 0)
-	stats->ratio /= out;
-}
-
-/*
- * Allocate space for a decompressor.
- */
-static void *
-z_decomp_alloc(options, opt_len)
-    u_char *options;
-    int opt_len;
-{
-    struct deflate_state *state;
-    int w_size;
-
-    if (opt_len != CILEN_DEFLATE || options[0] != CI_DEFLATE
-	|| options[1] != CILEN_DEFLATE
-	|| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	|| options[3] != DEFLATE_CHK_SEQUENCE)
-	return NULL;
-    w_size = DEFLATE_SIZE(options[2]);
-    if (w_size < DEFLATE_MIN_SIZE || w_size > DEFLATE_MAX_SIZE)
-	return NULL;
-
-    state = (struct deflate_state *) malloc(sizeof(*state));
-    if (state == NULL)
-	return NULL;
-
-    state->strm.next_out = NULL;
-    state->strm.zalloc = (alloc_func) z_alloc;
-    state->strm.zfree = (free_func) z_free;
-    if (inflateInit2(&state->strm, -w_size) != Z_OK) {
-	free(state);
-	return NULL;
-    }
-
-    state->w_size = w_size;
-    memset(&state->stats, 0, sizeof(state->stats));
-    return (void *) state;
-}
-
-static void
-z_decomp_free(arg)
-    void *arg;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    inflateEnd(&state->strm);
-    free(state);
-}
-
-static int
-z_decomp_init(arg, options, opt_len, unit, hdrlen, mru, debug)
-    void *arg;
-    u_char *options;
-    int opt_len, unit, hdrlen, mru, debug;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    if (opt_len < CILEN_DEFLATE || options[0] != CI_DEFLATE
-	|| options[1] != CILEN_DEFLATE
-	|| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	|| DEFLATE_SIZE(options[2]) != state->w_size
-	|| options[3] != DEFLATE_CHK_SEQUENCE)
-	return 0;
-
-    state->seqno = 0;
-    state->unit = unit;
-    state->hdrlen = hdrlen;
-    state->debug = debug;
-    state->mru = mru;
-
-    inflateReset(&state->strm);
-
-    return 1;
-}
-
-static void
-z_decomp_reset(arg)
-    void *arg;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    state->seqno = 0;
-    inflateReset(&state->strm);
-}
-
-/*
- * Decompress a Deflate-compressed packet.
- *
- * Because of patent problems, we return DECOMP_ERROR for errors
- * found by inspecting the input data and for system problems, but
- * DECOMP_FATALERROR for any errors which could possibly be said to
- * be being detected "after" decompression.  For DECOMP_ERROR,
- * we can issue a CCP reset-request; for DECOMP_FATALERROR, we may be
- * infringing a patent of Motorola's if we do, so we take CCP down
- * instead.
- *
- * Given that the frame has the correct sequence number and a good FCS,
- * errors such as invalid codes in the input most likely indicate a
- * bug, so we return DECOMP_FATALERROR for them in order to turn off
- * compression, even though they are detected by inspecting the input.
- */
-static int
-z_decompress(arg, mi, inlen, mo, outlenp)
-    void *arg;
-    u_char *mi, *mo;
-    int inlen, *outlenp;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-    u_char *rptr, *wptr;
-    int rlen, olen, ospace;
-    int seq, i, flush, r, decode_proto;
-
-    rptr = mi;
-    if (*rptr == 0)
-	++rptr;
-    ++rptr;
-
-    /* Check the sequence number. */
-    seq = (rptr[0] << 8) + rptr[1];
-    rptr += 2;
-    if (seq != state->seqno) {
-#if !DEFLATE_DEBUG
-	if (state->debug)
-#endif
-	    printf("z_decompress%d: bad seq # %d, expected %d\n",
-		   state->unit, seq, state->seqno);
-	return DECOMP_ERROR;
-    }
-    ++state->seqno;
-
-    /*
-     * Set up to call inflate.
-     */
-    wptr = mo;
-    state->strm.next_in = rptr;
-    state->strm.avail_in = mi + inlen - rptr;
-    rlen = state->strm.avail_in + PPP_HDRLEN + DEFLATE_OVHD;
-    state->strm.next_out = wptr;
-    state->strm.avail_out = state->mru + 2;
-
-    r = inflate(&state->strm, Z_PACKET_FLUSH);
-    if (r != Z_OK) {
-#if !DEFLATE_DEBUG
-	if (state->debug)
-#endif
-	    printf("z_decompress%d: inflate returned %d (%s)\n",
-		   state->unit, r, (state->strm.msg? state->strm.msg: ""));
-	return DECOMP_FATALERROR;
-    }
-    olen = state->mru + 2 - state->strm.avail_out;
-    *outlenp = olen;
-
-    if ((wptr[0] & 1) != 0)
-	++olen;			/* for suppressed protocol high byte */
-    olen += 2;			/* for address, control */
-
-#if DEFLATE_DEBUG
-    if (olen > state->mru + PPP_HDRLEN)
-	printf("ppp_deflate%d: exceeded mru (%d > %d)\n",
-	       state->unit, olen, state->mru + PPP_HDRLEN);
-#endif
-
-    state->stats.unc_bytes += olen;
-    state->stats.unc_packets++;
-    state->stats.comp_bytes += rlen;
-    state->stats.comp_packets++;
-
-    return DECOMP_OK;
-}
-
-/*
- * Incompressible data has arrived - add it to the history.
- */
-static void
-z_incomp(arg, mi, mlen)
-    void *arg;
-    u_char *mi;
-    int mlen;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-    u_char *rptr;
-    int rlen, proto, r;
-
-    /*
-     * Check that the protocol is one we handle.
-     */
-    rptr = mi;
-    proto = rptr[0];
-    if ((proto & 1) == 0)
-	proto = (proto << 8) + rptr[1];
-    if (proto > 0x3fff || proto == 0xfd || proto == 0xfb)
-	return;
-
-    ++state->seqno;
-
-    if (rptr[0] == 0)
-	++rptr;
-    rlen = mi + mlen - rptr;
-    state->strm.next_in = rptr;
-    state->strm.avail_in = rlen;
-    r = inflateIncomp(&state->strm);
-    if (r != Z_OK) {
-	/* gak! */
-#if !DEFLATE_DEBUG
-	if (state->debug)
-#endif
-	    printf("z_incomp%d: inflateIncomp returned %d (%s)\n",
-		   state->unit, r, (state->strm.msg? state->strm.msg: ""));
-	return;
-    }
-
-    /*
-     * Update stats.
-     */
-    if (proto <= 0xff)
-	++rlen;
-    rlen += 2;
-    state->stats.inc_bytes += rlen;
-    state->stats.inc_packets++;
-    state->stats.unc_bytes += rlen;
-    state->stats.unc_packets++;
-}
-
-#endif /* DO_DEFLATE */
diff --git a/mdk-stage1/ppp/pppdump/ppp-comp.h b/mdk-stage1/ppp/pppdump/ppp-comp.h
deleted file mode 100644
index 9221c0db4..000000000
--- a/mdk-stage1/ppp/pppdump/ppp-comp.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * ppp-comp.h - Definitions for doing PPP packet compression.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-#ifndef _NET_PPP_COMP_H
-#define _NET_PPP_COMP_H
-
-/*
- * The following symbols control whether we include code for
- * various compression methods.
- */
-#ifndef DO_BSD_COMPRESS
-#define DO_BSD_COMPRESS	1	/* by default, include BSD-Compress */
-#endif
-#ifndef DO_DEFLATE
-#define DO_DEFLATE	1	/* by default, include Deflate */
-#endif
-#define DO_PREDICTOR_1	0
-#define DO_PREDICTOR_2	0
-
-/*
- * Structure giving methods for compression/decompression.
- */
-struct compressor {
-	int	compress_proto;	/* CCP compression protocol number */
-
-	/* Allocate space for a decompressor (receive side) */
-	void	*(*decomp_alloc) __P((u_char *options, int opt_len));
-	/* Free space used by a decompressor */
-	void	(*decomp_free) __P((void *state));
-	/* Initialize a decompressor */
-	int	(*decomp_init) __P((void *state, u_char *options, int opt_len,
-				    int unit, int hdrlen, int mru, int debug));
-	/* Reset a decompressor */
-	void	(*decomp_reset) __P((void *state));
-	/* Decompress a packet. */
-	int	(*decompress) __P((void *state, u_char *mp, int inlen,
-				   u_char *dmp, int *outlen));
-	/* Update state for an incompressible packet received */
-	void	(*incomp) __P((void *state, u_char *mp, int len));
-	/* Return decompression statistics */
-	void	(*decomp_stat) __P((void *state, struct compstat *stats));
-};
-
-/*
- * Return values for decompress routine.
- * We need to make these distinctions so that we can disable certain
- * useful functionality, namely sending a CCP reset-request as a result
- * of an error detected after decompression.  This is to avoid infringing
- * a patent held by Motorola.
- * Don't you just lurve software patents.
- */
-#define DECOMP_OK		0	/* everything went OK */
-#define DECOMP_ERROR		1	/* error detected before decomp. */
-#define DECOMP_FATALERROR	2	/* error detected after decomp. */
-
-/*
- * CCP codes.
- */
-#define CCP_CONFREQ	1
-#define CCP_CONFACK	2
-#define CCP_CONFNAK	3
-#define CCP_CONFREJ	4
-#define CCP_TERMREQ	5
-#define CCP_TERMACK	6
-#define CCP_RESETREQ	14
-#define CCP_RESETACK	15
-
-/*
- * Max # bytes for a CCP option
- */
-#define CCP_MAX_OPTION_LENGTH	32
-
-/*
- * Parts of a CCP packet.
- */
-#define CCP_CODE(dp)		((dp)[0])
-#define CCP_ID(dp)		((dp)[1])
-#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN		4
-
-#define CCP_OPT_CODE(dp)	((dp)[0])
-#define CCP_OPT_LENGTH(dp)	((dp)[1])
-#define CCP_OPT_MINLEN		2
-
-/*
- * Definitions for BSD-Compress.
- */
-#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS	3	/* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
-#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
-#define BSD_CURRENT_VERSION	1		/* current version number */
-#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
-
-#define BSD_MIN_BITS		9	/* smallest code size supported */
-#define BSD_MAX_BITS		15	/* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-#define CI_DEFLATE		26	/* config option for Deflate */
-#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
-#define CILEN_DEFLATE		4	/* length of its config option */
-
-#define DEFLATE_MIN_SIZE	8
-#define DEFLATE_MAX_SIZE	15
-#define DEFLATE_METHOD_VAL	8
-#define DEFLATE_SIZE(x)		(((x) >> 4) + DEFLATE_MIN_SIZE)
-#define DEFLATE_METHOD(x)	((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w)	((((w) - DEFLATE_MIN_SIZE) << 4) \
-				 + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE	0
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1	2	/* length of its config option */
-#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2	2	/* length of its config option */
-
-#endif /* _NET_PPP_COMP_H */
diff --git a/mdk-stage1/ppp/pppdump/pppdump.8 b/mdk-stage1/ppp/pppdump/pppdump.8
deleted file mode 100644
index c0172f519..000000000
--- a/mdk-stage1/ppp/pppdump/pppdump.8
+++ /dev/null
@@ -1,62 +0,0 @@
-.\"	@(#) $Id$
-.TH PPPDUMP 8 "1 April 1999"
-.SH NAME
-pppdump \- convert PPP record file to readable format
-.SH SYNOPSIS
-.B pppdump
-[
-.B -h
-|
-.B -p
-[
-.B -d
-]] [
-.B -r
-] [
-.B -m \fImru
-] [
-.I file \fR...
-]
-.ti 12
-.SH DESCRIPTION
-The
-.B pppdump
-utility converts the files written using the \fIrecord\fR option of
-.B pppd
-into a human-readable format.  If one or more filenames are specified,
-.B pppdump
-will read each in turn; otherwise it will read its standard input.  In
-each case the result is written to standard output.
-.PP
-The options are as follows:
-.TP
-.B -h
-Prints the bytes sent and received in hexadecimal.  If neither this
-option nor the \fB-p\fR option is specified, the bytes are printed as
-the characters themselves, with non-printing and non-ASCII characters
-printed as escape sequences.
-.TP
-.B -p
-Collects the bytes sent and received into PPP packets, interpreting
-the async HDLC framing and escape characters and checking the FCS
-(frame check sequence) of each packet.  The packets are printed as hex
-values and as characters (non-printable characters are printed as
-`.').
-.TP
-.B -d
-With the \fB-p\fR option, this option causes
-.B pppdump
-to decompress packets which have been compressed with the BSD-Compress
-or Deflate methods.
-.TP
-.B -r
-Reverses the direction indicators, so that `sent' is printed for
-bytes or packets received, and `rcvd' is printed for bytes or packets
-sent.
-.TP
-.B -m \fImru
-Use \fImru\fR as the MRU (maximum receive unit) for both directions of
-the link when checking for over-length PPP packets (with the \fB-p\fR
-option).
-.SH SEE ALSO
-pppd(8)
diff --git a/mdk-stage1/ppp/pppdump/pppdump.c b/mdk-stage1/ppp/pppdump/pppdump.c
deleted file mode 100644
index a8e69d4bf..000000000
--- a/mdk-stage1/ppp/pppdump/pppdump.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * pppdump - print out the contents of a record file generated by
- * pppd in readable form.
- *
- * Copyright (C) 1999  Paul Mackerras.  All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms.  The name of the author
- * may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#include <stdio.h>
-#include <unistd.h>
-#include <time.h>
-#include <sys/types.h>
-#include "ppp_defs.h"
-#include "ppp-comp.h"
-
-int hexmode;
-int pppmode;
-int reverse;
-int decompress;
-int mru = 1500;
-int abs_times;
-time_t start_time;
-int start_time_tenths;
-int tot_sent, tot_rcvd;
-
-extern int optind;
-extern char *optarg;
-
-main(ac, av)
-    int ac;
-    char **av;
-{
-    int i;
-    char *p;
-    FILE *f;
-
-    while ((i = getopt(ac, av, "hprdm:a")) != -1) {
-	switch (i) {
-	case 'h':
-	    hexmode = 1;
-	    break;
-	case 'p':
-	    pppmode = 1;
-	    break;
-	case 'r':
-	    reverse = 1;
-	    break;
-	case 'd':
-	    decompress = 1;
-	    break;
-	case 'm':
-	    mru = atoi(optarg);
-	    break;
-	case 'a':
-	    abs_times = 1;
-	    break;
-	default:
-	    fprintf(stderr, "Usage: %s [-h | -p[d]] [-r] [-m mru] [-a] [file ...]\n", av[0]);
-	    exit(1);
-	}
-    }
-    if (optind >= ac)
-	dumplog(stdin);
-    else {
-	for (i = optind; i < ac; ++i) {
-	    p = av[i];
-	    if ((f = fopen(p, "r")) == NULL) {
-		perror(p);
-		exit(1);
-	    }
-	    if (pppmode)
-		dumpppp(f);
-	    else
-		dumplog(f);
-	    fclose(f);
-	}
-    }
-    exit(0);
-}
-
-dumplog(f)
-    FILE *f;
-{
-    int c, n, k, col;
-    int nb, c2;
-    unsigned char buf[16];
-
-    while ((c = getc(f)) != EOF) {
-	switch (c) {
-	case 1:
-	case 2:
-	    if (reverse)
-		c = 3 - c;
-	    printf("%s %c", c==1? "sent": "rcvd", hexmode? ' ': '"');
-	    col = 6;
-	    n = getc(f);
-	    n = (n << 8) + getc(f);
-	    *(c==1? &tot_sent: &tot_rcvd) += n;
-	    nb = 0;
-	    for (; n > 0; --n) {
-		c = getc(f);
-		if (c == EOF) {
-		    printf("\nEOF\n");
-		    exit(0);
-		}
-		if (hexmode) {
-		    if (nb >= 16) {
-			printf("  ");
-			for (k = 0; k < nb; ++k) {
-			    c2 = buf[k];
-			    putchar((' ' <= c2 && c2 <= '~')? c2: '.');
-			}
-			printf("\n      ");
-			nb = 0;
-		    }
-		    buf[nb++] = c;
-		    printf(" %.2x", c);
-		} else {
-		    k = (' ' <= c && c <= '~')? (c != '\\' && c != '"')? 1: 2: 3;
-		    if ((col += k) >= 78) {
-			printf("\n      ");
-			col = 6 + k;
-		    }
-		    switch (k) {
-		    case 1:
-			putchar(c);
-			break;
-		    case 2:
-			printf("\\%c", c);
-			break;
-		    case 3:
-			printf("\\%.2x", c);
-			break;
-		    }
-		}
-	    }
-	    if (hexmode) {
-		for (k = nb; k < 16; ++k)
-		    printf("   ");
-		printf("  ");
-		for (k = 0; k < nb; ++k) {
-		    c2 = buf[k];
-		    putchar((' ' <= c2 && c2 <= '~')? c2: '.');
-		}
-	    } else
-		putchar('"');
-	    printf("\n");
-	    break;
-	case 3:
-	case 4:
-	    printf("end %s\n", c==3? "send": "recv");
-	    break;
-	case 5:
-	case 6:
-	case 7:
-	    show_time(f, c);
-	    break;
-	default:
-	    printf("?%.2x\n");
-	}
-    }
-}
-
-/*
- * FCS lookup table as calculated by genfcstab.
- */
-static u_short fcstab[256] = {
-	0x0000,	0x1189,	0x2312,	0x329b,	0x4624,	0x57ad,	0x6536,	0x74bf,
-	0x8c48,	0x9dc1,	0xaf5a,	0xbed3,	0xca6c,	0xdbe5,	0xe97e,	0xf8f7,
-	0x1081,	0x0108,	0x3393,	0x221a,	0x56a5,	0x472c,	0x75b7,	0x643e,
-	0x9cc9,	0x8d40,	0xbfdb,	0xae52,	0xdaed,	0xcb64,	0xf9ff,	0xe876,
-	0x2102,	0x308b,	0x0210,	0x1399,	0x6726,	0x76af,	0x4434,	0x55bd,
-	0xad4a,	0xbcc3,	0x8e58,	0x9fd1,	0xeb6e,	0xfae7,	0xc87c,	0xd9f5,
-	0x3183,	0x200a,	0x1291,	0x0318,	0x77a7,	0x662e,	0x54b5,	0x453c,
-	0xbdcb,	0xac42,	0x9ed9,	0x8f50,	0xfbef,	0xea66,	0xd8fd,	0xc974,
-	0x4204,	0x538d,	0x6116,	0x709f,	0x0420,	0x15a9,	0x2732,	0x36bb,
-	0xce4c,	0xdfc5,	0xed5e,	0xfcd7,	0x8868,	0x99e1,	0xab7a,	0xbaf3,
-	0x5285,	0x430c,	0x7197,	0x601e,	0x14a1,	0x0528,	0x37b3,	0x263a,
-	0xdecd,	0xcf44,	0xfddf,	0xec56,	0x98e9,	0x8960,	0xbbfb,	0xaa72,
-	0x6306,	0x728f,	0x4014,	0x519d,	0x2522,	0x34ab,	0x0630,	0x17b9,
-	0xef4e,	0xfec7,	0xcc5c,	0xddd5,	0xa96a,	0xb8e3,	0x8a78,	0x9bf1,
-	0x7387,	0x620e,	0x5095,	0x411c,	0x35a3,	0x242a,	0x16b1,	0x0738,
-	0xffcf,	0xee46,	0xdcdd,	0xcd54,	0xb9eb,	0xa862,	0x9af9,	0x8b70,
-	0x8408,	0x9581,	0xa71a,	0xb693,	0xc22c,	0xd3a5,	0xe13e,	0xf0b7,
-	0x0840,	0x19c9,	0x2b52,	0x3adb,	0x4e64,	0x5fed,	0x6d76,	0x7cff,
-	0x9489,	0x8500,	0xb79b,	0xa612,	0xd2ad,	0xc324,	0xf1bf,	0xe036,
-	0x18c1,	0x0948,	0x3bd3,	0x2a5a,	0x5ee5,	0x4f6c,	0x7df7,	0x6c7e,
-	0xa50a,	0xb483,	0x8618,	0x9791,	0xe32e,	0xf2a7,	0xc03c,	0xd1b5,
-	0x2942,	0x38cb,	0x0a50,	0x1bd9,	0x6f66,	0x7eef,	0x4c74,	0x5dfd,
-	0xb58b,	0xa402,	0x9699,	0x8710,	0xf3af,	0xe226,	0xd0bd,	0xc134,
-	0x39c3,	0x284a,	0x1ad1,	0x0b58,	0x7fe7,	0x6e6e,	0x5cf5,	0x4d7c,
-	0xc60c,	0xd785,	0xe51e,	0xf497,	0x8028,	0x91a1,	0xa33a,	0xb2b3,
-	0x4a44,	0x5bcd,	0x6956,	0x78df,	0x0c60,	0x1de9,	0x2f72,	0x3efb,
-	0xd68d,	0xc704,	0xf59f,	0xe416,	0x90a9,	0x8120,	0xb3bb,	0xa232,
-	0x5ac5,	0x4b4c,	0x79d7,	0x685e,	0x1ce1,	0x0d68,	0x3ff3,	0x2e7a,
-	0xe70e,	0xf687,	0xc41c,	0xd595,	0xa12a,	0xb0a3,	0x8238,	0x93b1,
-	0x6b46,	0x7acf,	0x4854,	0x59dd,	0x2d62,	0x3ceb,	0x0e70,	0x1ff9,
-	0xf78f,	0xe606,	0xd49d,	0xc514,	0xb1ab,	0xa022,	0x92b9,	0x8330,
-	0x7bc7,	0x6a4e,	0x58d5,	0x495c,	0x3de3,	0x2c6a,	0x1ef1,	0x0f78
-};
-
-struct pkt {
-    int	cnt;
-    int	esc;
-    int	flags;
-    struct compressor *comp;
-    void *state;
-    unsigned char buf[8192];
-} spkt, rpkt;
-
-/* Values for flags */
-#define CCP_ISUP	1
-#define CCP_ERROR	2
-#define CCP_FATALERROR	4
-#define CCP_ERR		(CCP_ERROR | CCP_FATALERROR)
-#define CCP_DECOMP_RUN	8
-
-unsigned char dbuf[8192];
-
-dumpppp(f)
-    FILE *f;
-{
-    int c, n, k;
-    int nb, nl, dn, proto, rv;
-    char *dir, *q;
-    unsigned char *p, *r, *endp;
-    unsigned char *d;
-    unsigned short fcs;
-    struct pkt *pkt;
-
-    spkt.cnt = rpkt.cnt = 0;
-    spkt.esc = rpkt.esc = 0;
-    while ((c = getc(f)) != EOF) {
-	switch (c) {
-	case 1:
-	case 2:
-	    if (reverse)
-		c = 3 - c;
-	    dir = c==1? "sent": "rcvd";
-	    pkt = c==1? &spkt: &rpkt;
-	    n = getc(f);
-	    n = (n << 8) + getc(f);
-	    *(c==1? &tot_sent: &tot_rcvd) += n;
-	    for (; n > 0; --n) {
-		c = getc(f);
-		switch (c) {
-		case EOF:
-		    printf("\nEOF\n");
-		    if (spkt.cnt > 0)
-			printf("[%d bytes in incomplete send packet]\n",
-			       spkt.cnt);
-		    if (rpkt.cnt > 0)
-			printf("[%d bytes in incomplete recv packet]\n",
-			       rpkt.cnt);
-		    exit(0);
-		case '~':
-		    if (pkt->cnt > 0) {
-			q = dir;
-			if (pkt->esc) {
-			    printf("%s aborted packet:\n     ", dir);
-			    q = "    ";
-			}
-			nb = pkt->cnt;
-			p = pkt->buf;
-			pkt->cnt = 0;
-			pkt->esc = 0;
-			if (nb <= 2) {
-			    printf("%s short packet [%d bytes]:", q, nb);
-			    for (k = 0; k < nb; ++k)
-				printf(" %.2x", p[k]);
-			    printf("\n");
-			    break;
-			}
-			fcs = PPP_INITFCS;
-			for (k = 0; k < nb; ++k)
-			    fcs = PPP_FCS(fcs, p[k]);
-			fcs &= 0xFFFF;
-			nb -= 2;
-			endp = p + nb;
-			r = p;
-			if (r[0] == 0xff && r[1] == 3)
-			    r += 2;
-			if ((r[0] & 1) == 0)
-			    ++r;
-			++r;
-			if (endp - r > mru)
-			    printf("     ERROR: length (%d) > MRU (%d)\n",
-				   endp - r, mru);
-			if (decompress && fcs == PPP_GOODFCS) {
-			    /* See if this is a CCP or compressed packet */
-			    d = dbuf;
-			    r = p;
-			    if (r[0] == 0xff && r[1] == 3) {
-				*d++ = *r++;
-				*d++ = *r++;
-			    }
-			    proto = r[0];
-			    if ((proto & 1) == 0)
-				proto = (proto << 8) + r[1];
-			    if (proto == PPP_CCP) {
-				handle_ccp(pkt, r + 2, endp - r - 2);
-			    } else if (proto == PPP_COMP) {
-				if ((pkt->flags & CCP_ISUP)
-				    && (pkt->flags & CCP_DECOMP_RUN)
-				    && pkt->state
-				    && (pkt->flags & CCP_ERR) == 0) {
-				    rv = pkt->comp->decompress(pkt->state, r,
-							endp - r, d, &dn);
-				    switch (rv) {
-				    case DECOMP_OK:
-					p = dbuf;
-					nb = d + dn - p;
-					if ((d[0] & 1) == 0)
-					    --dn;
-					--dn;
-					if (dn > mru)
-					    printf("     ERROR: decompressed length (%d) > MRU (%d)\n", dn, mru);
-					break;
-				    case DECOMP_ERROR:
-					printf("     DECOMPRESSION ERROR\n");
-					pkt->flags |= CCP_ERROR;
-					break;
-				    case DECOMP_FATALERROR:
-					printf("     FATAL DECOMPRESSION ERROR\n");
-					pkt->flags |= CCP_FATALERROR;
-					break;
-				    }
-				}
-			    } else if (pkt->state
-				       && (pkt->flags & CCP_DECOMP_RUN)) {
-				pkt->comp->incomp(pkt->state, r, endp - r);
-			    }
-			}
-			do {
-			    nl = nb < 16? nb: 16;
-			    printf("%s ", q);
-			    for (k = 0; k < nl; ++k)
-				printf(" %.2x", p[k]);
-			    for (; k < 16; ++k)
-				printf("   ");
-			    printf("  ");
-			    for (k = 0; k < nl; ++k) {
-				c = p[k];
-				putchar((' ' <= c && c <= '~')? c: '.');
-			    }
-			    printf("\n");
-			    q = "    ";
-			    p += nl;
-			    nb -= nl;
-			} while (nb > 0);
-			if (fcs != PPP_GOODFCS)
-			    printf("     BAD FCS: (residue = %x)\n", fcs);
-		    }
-		    break;
-		case '}':
-		    if (!pkt->esc) {
-			pkt->esc = 1;
-			break;
-		    }
-		    /* else fall through */
-		default:
-		    if (pkt->esc) {
-			c ^= 0x20;
-			pkt->esc = 0;
-		    }
-		    pkt->buf[pkt->cnt++] = c;
-		    break;
-		}
-	    }
-	    break;
-	case 3:
-	case 4:
-	    if (reverse)
-		c = 7 - c;
-	    dir = c==3? "send": "recv";
-	    pkt = c==3? &spkt: &rpkt;
-	    printf("end %s", dir);
-	    if (pkt->cnt > 0)
-		printf("  [%d bytes in incomplete packet]", pkt->cnt);
-	    printf("\n");
-	    break;
-	case 5:
-	case 6:
-	case 7:
-	    show_time(f, c);
-	    break;
-	default:
-	    printf("?%.2x\n");
-	}
-    }
-}
-
-extern struct compressor ppp_bsd_compress, ppp_deflate;
-
-struct compressor *compressors[] = {
-#if DO_BSD_COMPRESS
-    &ppp_bsd_compress,
-#endif
-#if DO_DEFLATE
-    &ppp_deflate,
-#endif
-    NULL
-};
-
-handle_ccp(cp, dp, len)
-    struct pkt *cp;
-    u_char *dp;
-    int len;
-{
-    int clen;
-    struct compressor **comp;
-
-    if (len < CCP_HDRLEN)
-	return;
-    clen = CCP_LENGTH(dp);
-    if (clen > len)
-	return;
-
-    switch (CCP_CODE(dp)) {
-    case CCP_CONFACK:
-	cp->flags &= ~(CCP_DECOMP_RUN | CCP_ISUP);
-	if (clen < CCP_HDRLEN + CCP_OPT_MINLEN
-	    || clen < CCP_HDRLEN + CCP_OPT_LENGTH(dp + CCP_HDRLEN))
-	    break;
-	dp += CCP_HDRLEN;
-	clen -= CCP_HDRLEN;
-	for (comp = compressors; *comp != NULL; ++comp) {
-	    if ((*comp)->compress_proto == dp[0]) {
-		if (cp->state != NULL) {
-		    (*cp->comp->decomp_free)(cp->state);
-		    cp->state = NULL;
-		}
-		cp->comp = *comp;
-		cp->state = (*comp)->decomp_alloc(dp, CCP_OPT_LENGTH(dp));
-		cp->flags |= CCP_ISUP;
-		if (cp->state != NULL
-		    && (*cp->comp->decomp_init)
-		        (cp->state, dp, clen, 0, 0, 8192, 1))
-		    cp->flags = (cp->flags & ~CCP_ERR) | CCP_DECOMP_RUN;
-		break;
-	    }
-	}
-	break;
-
-    case CCP_CONFNAK:
-    case CCP_CONFREJ:
-	cp->flags &= ~(CCP_DECOMP_RUN | CCP_ISUP);
-	break;
-
-    case CCP_RESETACK:
-	if (cp->flags & CCP_ISUP) {
-	    if (cp->state && (cp->flags & CCP_DECOMP_RUN)) {
-		(*cp->comp->decomp_reset)(cp->state);
-		cp->flags &= ~CCP_ERROR;
-	    }
-	}
-	break;
-    }
-}
-
-show_time(f, c)
-    FILE *f;
-    int c;
-{
-    time_t t;
-    int n;
-    struct tm *tm;
-
-    if (c == 7) {
-	t = getc(f);
-	t = (t << 8) + getc(f);
-	t = (t << 8) + getc(f);
-	t = (t << 8) + getc(f);
-	printf("start %s", ctime(&t));
-	start_time = t;
-	start_time_tenths = 0;
-	tot_sent = tot_rcvd = 0;
-    } else {
-	n = getc(f);
-	if (c == 5) {
-	    for (c = 3; c > 0; --c)
-		n = (n << 8) + getc(f);
-	}
-	if (abs_times) {
-	    n += start_time_tenths;
-	    start_time += n / 10;
-	    start_time_tenths = n % 10;
-	    tm = localtime(&start_time);
-	    printf("time  %.2d:%.2d:%.2d.%d", tm->tm_hour, tm->tm_min,
-		   tm->tm_sec, start_time_tenths);
-	    printf("  (sent %d, rcvd %d)\n", tot_sent, tot_rcvd);
-	} else
-	    printf("time  %.1fs\n", (double) n / 10);
-    }
-}
diff --git a/mdk-stage1/ppp/pppdump/zlib.c b/mdk-stage1/ppp/pppdump/zlib.c
deleted file mode 100644
index 5b8372719..000000000
--- a/mdk-stage1/ppp/pppdump/zlib.c
+++ /dev/null
@@ -1,4614 +0,0 @@
-/*
- * This file is derived from various .h and .c files from the zlib-0.95
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.  See zlib.h for conditions of
- * distribution and use.
- *
- * Changes that have been made include:
- * - changed functions not used outside this file to "local"
- * - added minCompression parameter to deflateInit2
- * - added Z_PACKET_FLUSH (see zlib.h for details)
- * - added inflateIncomp
- *
- * $Id$
- */
-
-
-/*+++++*/
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* From: zutil.h,v 1.9 1995/05/03 17:27:12 jloup Exp */
-
-#define _Z_UTIL_H
-
-#include "zlib.h"
-
-#ifdef STDC
-#  include <string.h>
-#endif
-
-#ifndef local
-#  define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-#define FAR
-
-typedef unsigned char  uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long  ulg;
-
-extern char *z_errmsg[]; /* indexed by 1-zlib_error */
-
-#define ERR_RETURN(strm,err) return (strm->msg=z_errmsg[1-err], err)
-/* To be used only when the state is known to be valid */
-
-#ifndef NULL
-#define NULL	((void *) 0)
-#endif
-
-        /* common constants */
-
-#define DEFLATED   8
-
-#ifndef DEF_WBITS
-#  define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-#  define DEF_MEM_LEVEL 8
-#else
-#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES    2
-/* The three kinds of block type */
-
-#define MIN_MATCH  3
-#define MAX_MATCH  258
-/* The minimum and maximum match lengths */
-
-         /* functions */
-
-#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
-#  define HAVE_MEMCPY
-#endif
-#ifdef HAVE_MEMCPY
-#  define zmemcpy memcpy
-#  define zmemzero(dest, len) memset(dest, 0, len)
-#else
-#  define zmemcpy(d, s, n)	bcopy((s), (d), (n))
-#  define zmemzero		bzero
-#endif
-
-/* Diagnostic functions */
-#ifdef DEBUG_ZLIB
-#  include <stdio.h>
-#  ifndef verbose
-#    define verbose 0
-#  endif
-#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-
-typedef uLong (*check_func) OF((uLong check, Bytef *buf, uInt len));
-
-/* voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); */
-/* void   zcfree  OF((voidpf opaque, voidpf ptr)); */
-
-#define ZALLOC(strm, items, size) \
-           (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr, size)	\
-	   (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), (size))
-#define TRY_FREE(s, p, n) {if (p) ZFREE(s, p, n);}
-
-/* deflate.h -- internal compression state
- * Copyright (C) 1995 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-
-/*+++++*/
-/* From: deflate.h,v 1.5 1995/05/03 17:27:09 jloup Exp */
-
-/* ===========================================================================
- * Internal compression state.
- */
-
-/* Data type */
-#define BINARY  0
-#define ASCII   1
-#define UNKNOWN 2
-
-#define LENGTH_CODES 29
-/* number of length codes, not counting the special END_BLOCK code */
-
-#define LITERALS  256
-/* number of literal bytes 0..255 */
-
-#define L_CODES (LITERALS+1+LENGTH_CODES)
-/* number of Literal or Length codes, including the END_BLOCK code */
-
-#define D_CODES   30
-/* number of distance codes */
-
-#define BL_CODES  19
-/* number of codes used to transfer the bit lengths */
-
-#define HEAP_SIZE (2*L_CODES+1)
-/* maximum heap size */
-
-#define MAX_BITS 15
-/* All codes must not exceed MAX_BITS bits */
-
-#define INIT_STATE    42
-#define BUSY_STATE   113
-#define FLUSH_STATE  124
-#define FINISH_STATE 666
-/* Stream status */
-
-
-/* Data structure describing a single value and its code string. */
-typedef struct ct_data_s {
-    union {
-        ush  freq;       /* frequency count */
-        ush  code;       /* bit string */
-    } fc;
-    union {
-        ush  dad;        /* father node in Huffman tree */
-        ush  len;        /* length of bit string */
-    } dl;
-} FAR ct_data;
-
-#define Freq fc.freq
-#define Code fc.code
-#define Dad  dl.dad
-#define Len  dl.len
-
-typedef struct static_tree_desc_s  static_tree_desc;
-
-typedef struct tree_desc_s {
-    ct_data *dyn_tree;           /* the dynamic tree */
-    int     max_code;            /* largest code with non zero frequency */
-    static_tree_desc *stat_desc; /* the corresponding static tree */
-} FAR tree_desc;
-
-typedef ush Pos;
-typedef Pos FAR Posf;
-typedef unsigned IPos;
-
-/* A Pos is an index in the character window. We use short instead of int to
- * save space in the various tables. IPos is used only for parameter passing.
- */
-
-typedef struct deflate_state {
-    z_stream *strm;      /* pointer back to this zlib stream */
-    int   status;        /* as the name implies */
-    Bytef *pending_buf;  /* output still pending */
-    Bytef *pending_out;  /* next pending byte to output to the stream */
-    int   pending;       /* nb of bytes in the pending buffer */
-    uLong adler;         /* adler32 of uncompressed data */
-    int   noheader;      /* suppress zlib header and adler32 */
-    Byte  data_type;     /* UNKNOWN, BINARY or ASCII */
-    Byte  method;        /* STORED (for zip only) or DEFLATED */
-    int	  minCompr;	 /* min size decrease for Z_FLUSH_NOSTORE */
-
-                /* used by deflate.c: */
-
-    uInt  w_size;        /* LZ77 window size (32K by default) */
-    uInt  w_bits;        /* log2(w_size)  (8..16) */
-    uInt  w_mask;        /* w_size - 1 */
-
-    Bytef *window;
-    /* Sliding window. Input bytes are read into the second half of the window,
-     * and move to the first half later to keep a dictionary of at least wSize
-     * bytes. With this organization, matches are limited to a distance of
-     * wSize-MAX_MATCH bytes, but this ensures that IO is always
-     * performed with a length multiple of the block size. Also, it limits
-     * the window size to 64K, which is quite useful on MSDOS.
-     * To do: use the user input buffer as sliding window.
-     */
-
-    ulg window_size;
-    /* Actual size of window: 2*wSize, except when the user input buffer
-     * is directly used as sliding window.
-     */
-
-    Posf *prev;
-    /* Link to older string with same hash index. To limit the size of this
-     * array to 64K, this link is maintained only for the last 32K strings.
-     * An index in this array is thus a window index modulo 32K.
-     */
-
-    Posf *head; /* Heads of the hash chains or NIL. */
-
-    uInt  ins_h;          /* hash index of string to be inserted */
-    uInt  hash_size;      /* number of elements in hash table */
-    uInt  hash_bits;      /* log2(hash_size) */
-    uInt  hash_mask;      /* hash_size-1 */
-
-    uInt  hash_shift;
-    /* Number of bits by which ins_h must be shifted at each input
-     * step. It must be such that after MIN_MATCH steps, the oldest
-     * byte no longer takes part in the hash key, that is:
-     *   hash_shift * MIN_MATCH >= hash_bits
-     */
-
-    long block_start;
-    /* Window position at the beginning of the current output block. Gets
-     * negative when the window is moved backwards.
-     */
-
-    uInt match_length;           /* length of best match */
-    IPos prev_match;             /* previous match */
-    int match_available;         /* set if previous match exists */
-    uInt strstart;               /* start of string to insert */
-    uInt match_start;            /* start of matching string */
-    uInt lookahead;              /* number of valid bytes ahead in window */
-
-    uInt prev_length;
-    /* Length of the best match at previous step. Matches not greater than this
-     * are discarded. This is used in the lazy match evaluation.
-     */
-
-    uInt max_chain_length;
-    /* To speed up deflation, hash chains are never searched beyond this
-     * length.  A higher limit improves compression ratio but degrades the
-     * speed.
-     */
-
-    uInt max_lazy_match;
-    /* Attempt to find a better match only when the current match is strictly
-     * smaller than this value. This mechanism is used only for compression
-     * levels >= 4.
-     */
-#   define max_insert_length  max_lazy_match
-    /* Insert new strings in the hash table only if the match length is not
-     * greater than this length. This saves time but degrades compression.
-     * max_insert_length is used only for compression levels <= 3.
-     */
-
-    int level;    /* compression level (1..9) */
-    int strategy; /* favor or force Huffman coding*/
-
-    uInt good_match;
-    /* Use a faster search when the previous match is longer than this */
-
-     int nice_match; /* Stop searching when current match exceeds this */
-
-                /* used by trees.c: */
-    /* Didn't use ct_data typedef below to supress compiler warning */
-    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
-    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
-    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
-
-    struct tree_desc_s l_desc;               /* desc. for literal tree */
-    struct tree_desc_s d_desc;               /* desc. for distance tree */
-    struct tree_desc_s bl_desc;              /* desc. for bit length tree */
-
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
-    int heap_len;               /* number of elements in the heap */
-    int heap_max;               /* element of largest frequency */
-    /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
-     * The same heap array is used to build all trees.
-     */
-
-    uch depth[2*L_CODES+1];
-    /* Depth of each subtree used as tie breaker for trees of equal frequency
-     */
-
-    uchf *l_buf;          /* buffer for literals or lengths */
-
-    uInt  lit_bufsize;
-    /* Size of match buffer for literals/lengths.  There are 4 reasons for
-     * limiting lit_bufsize to 64K:
-     *   - frequencies can be kept in 16 bit counters
-     *   - if compression is not successful for the first block, all input
-     *     data is still in the window so we can still emit a stored block even
-     *     when input comes from standard input.  (This can also be done for
-     *     all blocks if lit_bufsize is not greater than 32K.)
-     *   - if compression is not successful for a file smaller than 64K, we can
-     *     even emit a stored file instead of a stored block (saving 5 bytes).
-     *     This is applicable only for zip (not gzip or zlib).
-     *   - creating new Huffman trees less frequently may not provide fast
-     *     adaptation to changes in the input data statistics. (Take for
-     *     example a binary file with poorly compressible code followed by
-     *     a highly compressible string table.) Smaller buffer sizes give
-     *     fast adaptation but have of course the overhead of transmitting
-     *     trees more frequently.
-     *   - I can't count above 4
-     */
-
-    uInt last_lit;      /* running index in l_buf */
-
-    ushf *d_buf;
-    /* Buffer for distances. To simplify the code, d_buf and l_buf have
-     * the same number of elements. To use different lengths, an extra flag
-     * array would be necessary.
-     */
-
-    ulg opt_len;        /* bit length of current block with optimal trees */
-    ulg static_len;     /* bit length of current block with static trees */
-    ulg compressed_len; /* total bit length of compressed file */
-    uInt matches;       /* number of string matches in current block */
-    int last_eob_len;   /* bit length of EOB code for last block */
-
-#ifdef DEBUG_ZLIB
-    ulg bits_sent;      /* bit length of the compressed data */
-#endif
-
-    ush bi_buf;
-    /* Output buffer. bits are inserted starting at the bottom (least
-     * significant bits).
-     */
-    int bi_valid;
-    /* Number of valid bits in bi_buf.  All bits above the last valid bit
-     * are always zero.
-     */
-
-    uInt blocks_in_packet;
-    /* Number of blocks produced since the last time Z_PACKET_FLUSH
-     * was used.
-     */
-
-} FAR deflate_state;
-
-/* Output a byte on the stream.
- * IN assertion: there is enough room in pending_buf.
- */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
-
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
-        /* in trees.c */
-local void ct_init       OF((deflate_state *s));
-local int  ct_tally      OF((deflate_state *s, int dist, int lc));
-local ulg ct_flush_block OF((deflate_state *s, charf *buf, ulg stored_len,
-			     int flush));
-local void ct_align      OF((deflate_state *s));
-local void ct_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
-                          int eof));
-local void ct_stored_type_only OF((deflate_state *s));
-
-
-/*+++++*/
-/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process depends on being able to identify portions
- *      of the input text which are identical to earlier input (within a
- *      sliding window trailing behind the input currently being processed).
- *
- *      The most straightforward technique turns out to be the fastest for
- *      most input files: try all possible matches and select the longest.
- *      The key feature of this algorithm is that insertions into the string
- *      dictionary are very simple and thus fast, and deletions are avoided
- *      completely. Insertions are performed at each input character, whereas
- *      string matches are performed only when the previous match ends. So it
- *      is preferable to spend more time in matches to allow very fast string
- *      insertions and avoid deletions. The matching algorithm for small
- *      strings is inspired from that of Rabin & Karp. A brute force approach
- *      is used to find longer strings when a small match has been found.
- *      A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
- *      (by Leonid Broukhis).
- *         A previous version of this file used a more sophisticated algorithm
- *      (by Fiala and Greene) which is guaranteed to run in linear amortized
- *      time, but has a larger average cost, uses more memory and is patented.
- *      However the F&G algorithm may be faster for some highly redundant
- *      files if the parameter max_chain_length (described below) is too large.
- *
- *  ACKNOWLEDGEMENTS
- *
- *      The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
- *      I found it in 'freeze' written by Leonid Broukhis.
- *      Thanks to many people for bug reports and testing.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- *      A description of the Rabin and Karp algorithm is given in the book
- *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
- *
- *      Fiala,E.R., and Greene,D.H.
- *         Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
- *
- */
-
-/* From: deflate.c,v 1.8 1995/05/03 17:27:08 jloup Exp */
-
-local char zlib_copyright[] = " deflate Copyright 1995 Jean-loup Gailly ";
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-
-#define NIL 0
-/* Tail of hash chains */
-
-#ifndef TOO_FAR
-#  define TOO_FAR 4096
-#endif
-/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-/* Values for max_lazy_match, good_match and max_chain_length, depending on
- * the desired pack level (0..9). The values given below have been tuned to
- * exclude worst case performance for pathological files. Better values may be
- * found for specific files.
- */
-
-typedef struct config_s {
-   ush good_length; /* reduce lazy search above this match length */
-   ush max_lazy;    /* do not perform lazy search above this match length */
-   ush nice_length; /* quit search above this match length */
-   ush max_chain;
-} config;
-
-local config configuration_table[10] = {
-/*      good lazy nice chain */
-/* 0 */ {0,    0,  0,    0},  /* store only */
-/* 1 */ {4,    4,  8,    4},  /* maximum speed, no lazy matches */
-/* 2 */ {4,    5, 16,    8},
-/* 3 */ {4,    6, 32,   32},
-
-/* 4 */ {4,    4, 16,   16},  /* lazy matches */
-/* 5 */ {8,   16, 32,   32},
-/* 6 */ {8,   16, 128, 128},
-/* 7 */ {8,   32, 128, 256},
-/* 8 */ {32, 128, 258, 1024},
-/* 9 */ {32, 258, 258, 4096}}; /* maximum compression */
-
-/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
- * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
- * meaning.
- */
-
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-/* ===========================================================================
- *  Prototypes for local functions.
- */
-
-local void fill_window   OF((deflate_state *s));
-local int  deflate_fast  OF((deflate_state *s, int flush));
-local int  deflate_slow  OF((deflate_state *s, int flush));
-local void lm_init       OF((deflate_state *s));
-local int longest_match  OF((deflate_state *s, IPos cur_match));
-local void putShortMSB   OF((deflate_state *s, uInt b));
-local void flush_pending OF((z_stream *strm));
-local int read_buf       OF((z_stream *strm, charf *buf, unsigned size));
-#ifdef ASMV
-      void match_init OF((void)); /* asm code initialization */
-#endif
-
-#ifdef DEBUG_ZLIB
-local  void check_match OF((deflate_state *s, IPos start, IPos match,
-                            int length));
-#endif
-
-
-/* ===========================================================================
- * Update a hash value with the given input byte
- * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
- *    input characters, so that a running hash key can be computed from the
- *    previous key instead of complete recalculation each time.
- */
-#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
-
-
-/* ===========================================================================
- * Insert string str in the dictionary and set match_head to the previous head
- * of the hash chain (the most recent string with same hash key). Return
- * the previous length of the hash chain.
- * IN  assertion: all calls to to INSERT_STRING are made with consecutive
- *    input characters and the first MIN_MATCH bytes of str are valid
- *    (except for the last MIN_MATCH-1 bytes of the input file).
- */
-#define INSERT_STRING(s, str, match_head) \
-   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
-    s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
-    s->head[s->ins_h] = (str))
-
-/* ===========================================================================
- * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
- * prev[] will be initialized on the fly.
- */
-#define CLEAR_HASH(s) \
-    s->head[s->hash_size-1] = NIL; \
-    zmemzero((charf *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
-
-/* ========================================================================= */
-int deflateInit (strm, level)
-    z_stream *strm;
-    int level;
-{
-    return deflateInit2 (strm, level, DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
-			 0, 0);
-    /* To do: ignore strm->next_in if we use it as window */
-}
-
-/* ========================================================================= */
-int deflateInit2 (strm, level, method, windowBits, memLevel,
-		  strategy, minCompression)
-    z_stream *strm;
-    int  level;
-    int  method;
-    int  windowBits;
-    int  memLevel;
-    int  strategy;
-    int  minCompression;
-{
-    deflate_state *s;
-    int noheader = 0;
-
-    if (strm == Z_NULL) return Z_STREAM_ERROR;
-
-    strm->msg = Z_NULL;
-/*    if (strm->zalloc == Z_NULL) strm->zalloc = zcalloc; */
-/*    if (strm->zfree == Z_NULL) strm->zfree = zcfree; */
-
-    if (level == Z_DEFAULT_COMPRESSION) level = 6;
-
-    if (windowBits < 0) { /* undocumented feature: suppress zlib header */
-        noheader = 1;
-        windowBits = -windowBits;
-    }
-    if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != DEFLATED ||
-        windowBits < 8 || windowBits > 15 || level < 1 || level > 9) {
-        return Z_STREAM_ERROR;
-    }
-    s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
-    if (s == Z_NULL) return Z_MEM_ERROR;
-    strm->state = (struct internal_state FAR *)s;
-    s->strm = strm;
-
-    s->noheader = noheader;
-    s->w_bits = windowBits;
-    s->w_size = 1 << s->w_bits;
-    s->w_mask = s->w_size - 1;
-
-    s->hash_bits = memLevel + 7;
-    s->hash_size = 1 << s->hash_bits;
-    s->hash_mask = s->hash_size - 1;
-    s->hash_shift =  ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
-
-    s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
-    s->prev   = (Posf *)  ZALLOC(strm, s->w_size, sizeof(Pos));
-    s->head   = (Posf *)  ZALLOC(strm, s->hash_size, sizeof(Pos));
-
-    s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
-
-    s->pending_buf = (uchf *) ZALLOC(strm, s->lit_bufsize, 2*sizeof(ush));
-
-    if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
-        s->pending_buf == Z_NULL) {
-        strm->msg = z_errmsg[1-Z_MEM_ERROR];
-        deflateEnd (strm);
-        return Z_MEM_ERROR;
-    }
-    s->d_buf = (ushf *) &(s->pending_buf[s->lit_bufsize]);
-    s->l_buf = (uchf *) &(s->pending_buf[3*s->lit_bufsize]);
-    /* We overlay pending_buf and d_buf+l_buf. This works since the average
-     * output size for (length,distance) codes is <= 32 bits (worst case
-     * is 15+15+13=33).
-     */
-
-    s->level = level;
-    s->strategy = strategy;
-    s->method = (Byte)method;
-    s->minCompr = minCompression;
-    s->blocks_in_packet = 0;
-
-    return deflateReset(strm);
-}
-
-/* ========================================================================= */
-int deflateReset (strm)
-    z_stream *strm;
-{
-    deflate_state *s;
-    
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        strm->zalloc == Z_NULL || strm->zfree == Z_NULL) return Z_STREAM_ERROR;
-
-    strm->total_in = strm->total_out = 0;
-    strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
-    strm->data_type = Z_UNKNOWN;
-
-    s = (deflate_state *)strm->state;
-    s->pending = 0;
-    s->pending_out = s->pending_buf;
-
-    if (s->noheader < 0) {
-        s->noheader = 0; /* was set to -1 by deflate(..., Z_FINISH); */
-    }
-    s->status = s->noheader ? BUSY_STATE : INIT_STATE;
-    s->adler = 1;
-
-    ct_init(s);
-    lm_init(s);
-
-    return Z_OK;
-}
-
-/* =========================================================================
- * Put a short in the pending buffer. The 16-bit value is put in MSB order.
- * IN assertion: the stream state is correct and there is enough room in
- * pending_buf.
- */
-local void putShortMSB (s, b)
-    deflate_state *s;
-    uInt b;
-{
-    put_byte(s, (Byte)(b >> 8));
-    put_byte(s, (Byte)(b & 0xff));
-}   
-
-/* =========================================================================
- * Flush as much pending output as possible.
- */
-local void flush_pending(strm)
-    z_stream *strm;
-{
-    deflate_state *state = (deflate_state *) strm->state;
-    unsigned len = state->pending;
-
-    if (len > strm->avail_out) len = strm->avail_out;
-    if (len == 0) return;
-
-    if (strm->next_out != NULL) {
-	zmemcpy(strm->next_out, state->pending_out, len);
-	strm->next_out += len;
-    }
-    state->pending_out += len;
-    strm->total_out += len;
-    strm->avail_out -= len;
-    state->pending -= len;
-    if (state->pending == 0) {
-        state->pending_out = state->pending_buf;
-    }
-}
-
-/* ========================================================================= */
-int deflate (strm, flush)
-    z_stream *strm;
-    int flush;
-{
-    deflate_state *state = (deflate_state *) strm->state;
-
-    if (strm == Z_NULL || state == Z_NULL) return Z_STREAM_ERROR;
-    
-    if (strm->next_in == Z_NULL && strm->avail_in != 0) {
-        ERR_RETURN(strm, Z_STREAM_ERROR);
-    }
-    if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
-
-    state->strm = strm; /* just in case */
-
-    /* Write the zlib header */
-    if (state->status == INIT_STATE) {
-
-        uInt header = (DEFLATED + ((state->w_bits-8)<<4)) << 8;
-        uInt level_flags = (state->level-1) >> 1;
-
-        if (level_flags > 3) level_flags = 3;
-        header |= (level_flags << 6);
-        header += 31 - (header % 31);
-
-        state->status = BUSY_STATE;
-        putShortMSB(state, header);
-    }
-
-    /* Flush as much pending output as possible */
-    if (state->pending != 0) {
-        flush_pending(strm);
-        if (strm->avail_out == 0) return Z_OK;
-    }
-
-    /* If we came back in here to get the last output from
-     * a previous flush, we're done for now.
-     */
-    if (state->status == FLUSH_STATE) {
-	state->status = BUSY_STATE;
-	if (flush != Z_NO_FLUSH && flush != Z_FINISH)
-	    return Z_OK;
-    }
-
-    /* User must not provide more input after the first FINISH: */
-    if (state->status == FINISH_STATE && strm->avail_in != 0) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* Start a new block or continue the current one.
-     */
-    if (strm->avail_in != 0 || state->lookahead != 0 ||
-        (flush == Z_FINISH && state->status != FINISH_STATE)) {
-        int quit;
-
-        if (flush == Z_FINISH) {
-            state->status = FINISH_STATE;
-        }
-        if (state->level <= 3) {
-            quit = deflate_fast(state, flush);
-        } else {
-            quit = deflate_slow(state, flush);
-        }
-        if (quit || strm->avail_out == 0)
-	    return Z_OK;
-        /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
-         * of deflate should use the same flush parameter to make sure
-         * that the flush is complete. So we don't have to output an
-         * empty block here, this will be done at next call. This also
-         * ensures that for a very small output buffer, we emit at most
-         * one empty block.
-         */
-    }
-
-    /* If a flush was requested, we have a little more to output now. */
-    if (flush != Z_NO_FLUSH && flush != Z_FINISH
-	&& state->status != FINISH_STATE) {
-	switch (flush) {
-	case Z_PARTIAL_FLUSH:
-	    ct_align(state);
-	    break;
-	case Z_PACKET_FLUSH:
-	    /* Output just the 3-bit `stored' block type value,
-	       but not a zero length. */
-	    ct_stored_type_only(state);
-	    break;
-	default:
-	    ct_stored_block(state, (char*)0, 0L, 0);
-	    /* For a full flush, this empty block will be recognized
-	     * as a special marker by inflate_sync().
-	     */
-	    if (flush == Z_FULL_FLUSH) {
-		CLEAR_HASH(state);             /* forget history */
-	    }
-	}
-	flush_pending(strm);
-	if (strm->avail_out == 0) {
-	    /* We'll have to come back to get the rest of the output;
-	     * this ensures we don't output a second zero-length stored
-	     * block (or whatever).
-	     */
-	    state->status = FLUSH_STATE;
-	    return Z_OK;
-	}
-    }
-
-    Assert(strm->avail_out > 0, "bug2");
-
-    if (flush != Z_FINISH) return Z_OK;
-    if (state->noheader) return Z_STREAM_END;
-
-    /* Write the zlib trailer (adler32) */
-    putShortMSB(state, (uInt)(state->adler >> 16));
-    putShortMSB(state, (uInt)(state->adler & 0xffff));
-    flush_pending(strm);
-    /* If avail_out is zero, the application will call deflate again
-     * to flush the rest.
-     */
-    state->noheader = -1; /* write the trailer only once! */
-    return state->pending != 0 ? Z_OK : Z_STREAM_END;
-}
-
-/* ========================================================================= */
-int deflateEnd (strm)
-    z_stream *strm;
-{
-    deflate_state *state = (deflate_state *) strm->state;
-
-    if (strm == Z_NULL || state == Z_NULL) return Z_STREAM_ERROR;
-
-    TRY_FREE(strm, state->window, state->w_size * 2 * sizeof(Byte));
-    TRY_FREE(strm, state->prev, state->w_size * sizeof(Pos));
-    TRY_FREE(strm, state->head, state->hash_size * sizeof(Pos));
-    TRY_FREE(strm, state->pending_buf, state->lit_bufsize * 2 * sizeof(ush));
-
-    ZFREE(strm, state, sizeof(deflate_state));
-    strm->state = Z_NULL;
-
-    return Z_OK;
-}
-
-/* ===========================================================================
- * Read a new buffer from the current input stream, update the adler32
- * and total number of bytes read.
- */
-local int read_buf(strm, buf, size)
-    z_stream *strm;
-    charf *buf;
-    unsigned size;
-{
-    unsigned len = strm->avail_in;
-    deflate_state *state = (deflate_state *) strm->state;
-
-    if (len > size) len = size;
-    if (len == 0) return 0;
-
-    strm->avail_in  -= len;
-
-    if (!state->noheader) {
-        state->adler = adler32(state->adler, strm->next_in, len);
-    }
-    zmemcpy(buf, strm->next_in, len);
-    strm->next_in  += len;
-    strm->total_in += len;
-
-    return (int)len;
-}
-
-/* ===========================================================================
- * Initialize the "longest match" routines for a new zlib stream
- */
-local void lm_init (s)
-    deflate_state *s;
-{
-    s->window_size = (ulg)2L*s->w_size;
-
-    CLEAR_HASH(s);
-
-    /* Set the default configuration parameters:
-     */
-    s->max_lazy_match   = configuration_table[s->level].max_lazy;
-    s->good_match       = configuration_table[s->level].good_length;
-    s->nice_match       = configuration_table[s->level].nice_length;
-    s->max_chain_length = configuration_table[s->level].max_chain;
-
-    s->strstart = 0;
-    s->block_start = 0L;
-    s->lookahead = 0;
-    s->match_length = MIN_MATCH-1;
-    s->match_available = 0;
-    s->ins_h = 0;
-#ifdef ASMV
-    match_init(); /* initialize the asm code */
-#endif
-}
-
-/* ===========================================================================
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- */
-#ifndef ASMV
-/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
- * match.S. The code will be functionally equivalent.
- */
-local int longest_match(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    unsigned chain_length = s->max_chain_length;/* max hash chain length */
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
-    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-        s->strstart - (IPos)MAX_DIST(s) : NIL;
-    /* Stop when cur_match becomes <= limit. To simplify the code,
-     * we prevent matches with the string of window index 0.
-     */
-    Posf *prev = s->prev;
-    uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
-    /* Compare two bytes at a time. Note: this is not always beneficial.
-     * Try with and without -DUNALIGNED_OK to check.
-     */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
-    register ush scan_start = *(ushf*)scan;
-    register ush scan_end   = *(ushf*)(scan+best_len-1);
-#else
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-    register Byte scan_end1  = scan[best_len-1];
-    register Byte scan_end   = scan[best_len];
-#endif
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    /* Do not waste too much time if we already have a good match: */
-    if (s->prev_length >= s->good_match) {
-        chain_length >>= 2;
-    }
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    do {
-        Assert(cur_match < s->strstart, "no future");
-        match = s->window + cur_match;
-
-        /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2:
-         */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
-        /* This code assumes sizeof(unsigned short) == 2. Do not use
-         * UNALIGNED_OK if your compiler uses a different size.
-         */
-        if (*(ushf*)(match+best_len-1) != scan_end ||
-            *(ushf*)match != scan_start) continue;
-
-        /* It is not necessary to compare scan[2] and match[2] since they are
-         * always equal when the other bytes match, given that the hash keys
-         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
-         * strstart+3, +5, ... up to strstart+257. We check for insufficient
-         * lookahead only every 4th comparison; the 128th check will be made
-         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
-         * necessary to put more guard bytes at the end of the window, or
-         * to check more often for insufficient lookahead.
-         */
-        Assert(scan[2] == match[2], "scan[2]?");
-        scan++, match++;
-        do {
-        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 scan < strend);
-        /* The funny "do {}" generates better code on most compilers */
-
-        /* Here, scan <= window+strstart+257 */
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-        if (*scan == *match) scan++;
-
-        len = (MAX_MATCH - 1) - (int)(strend-scan);
-        scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
-        if (match[best_len]   != scan_end  ||
-            match[best_len-1] != scan_end1 ||
-            *match            != *scan     ||
-            *++match          != scan[1])      continue;
-
-        /* The check at best_len-1 can be removed because it will be made
-         * again later. (This heuristic is not always a win.)
-         * It is not necessary to compare scan[2] and match[2] since they
-         * are always equal when the other bytes match, given that
-         * the hash keys are equal and that HASH_BITS >= 8.
-         */
-        scan += 2, match++;
-        Assert(*scan == *match, "match[2]?");
-
-        /* We check for insufficient lookahead only every 8th comparison;
-         * the 256th check will be made at strstart+258.
-         */
-        do {
-        } while (*++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 scan < strend);
-
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-        len = MAX_MATCH - (int)(strend - scan);
-        scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
-        if (len > best_len) {
-            s->match_start = cur_match;
-            best_len = len;
-            if (len >= s->nice_match) break;
-#ifdef UNALIGNED_OK
-            scan_end = *(ushf*)(scan+best_len-1);
-#else
-            scan_end1  = scan[best_len-1];
-            scan_end   = scan[best_len];
-#endif
-        }
-    } while ((cur_match = prev[cur_match & wmask]) > limit
-             && --chain_length != 0);
-
-    return best_len;
-}
-#endif /* ASMV */
-
-#ifdef DEBUG_ZLIB
-/* ===========================================================================
- * Check that the match at match_start is indeed a match.
- */
-local void check_match(s, start, match, length)
-    deflate_state *s;
-    IPos start, match;
-    int length;
-{
-    /* check that the match is indeed a match */
-    if (memcmp((charf *)s->window + match,
-                (charf *)s->window + start, length) != EQUAL) {
-        fprintf(stderr,
-            " start %u, match %u, length %d\n",
-            start, match, length);
-        do { fprintf(stderr, "%c%c", s->window[match++],
-                     s->window[start++]); } while (--length != 0);
-        z_error("invalid match");
-    }
-    if (verbose > 1) {
-        fprintf(stderr,"\\[%d,%d]", start-match, length);
-        do { putc(s->window[start++], stderr); } while (--length != 0);
-    }
-}
-#else
-#  define check_match(s, start, match, length)
-#endif
-
-/* ===========================================================================
- * Fill the window when the lookahead becomes insufficient.
- * Updates strstart and lookahead.
- *
- * IN assertion: lookahead < MIN_LOOKAHEAD
- * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
- *    At least one byte has been read, or avail_in == 0; reads are
- *    performed for at least two bytes (required for the zip translate_eol
- *    option -- not supported here).
- */
-local void fill_window(s)
-    deflate_state *s;
-{
-    register unsigned n, m;
-    register Posf *p;
-    unsigned more;    /* Amount of free space at the end of the window. */
-    uInt wsize = s->w_size;
-
-    do {
-        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
-
-        /* Deal with !@#$% 64K limit: */
-        if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
-            more = wsize;
-        } else if (more == (unsigned)(-1)) {
-            /* Very unlikely, but possible on 16 bit machine if strstart == 0
-             * and lookahead == 1 (input done one byte at time)
-             */
-            more--;
-
-        /* If the window is almost full and there is insufficient lookahead,
-         * move the upper half to the lower one to make room in the upper half.
-         */
-        } else if (s->strstart >= wsize+MAX_DIST(s)) {
-
-            /* By the IN assertion, the window is not empty so we can't confuse
-             * more == 0 with more == 64K on a 16 bit machine.
-             */
-            zmemcpy((charf *)s->window, (charf *)s->window+wsize,
-                   (unsigned)wsize);
-            s->match_start -= wsize;
-            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
-
-            s->block_start -= (long) wsize;
-
-            /* Slide the hash table (could be avoided with 32 bit values
-               at the expense of memory usage):
-             */
-            n = s->hash_size;
-            p = &s->head[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-            } while (--n);
-
-            n = wsize;
-            p = &s->prev[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-                /* If n is not on any hash chain, prev[n] is garbage but
-                 * its value will never be used.
-                 */
-            } while (--n);
-
-            more += wsize;
-        }
-        if (s->strm->avail_in == 0) return;
-
-        /* If there was no sliding:
-         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
-         *    more == window_size - lookahead - strstart
-         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
-         * => more >= window_size - 2*WSIZE + 2
-         * In the BIG_MEM or MMAP case (not yet supported),
-         *   window_size == input_size + MIN_LOOKAHEAD  &&
-         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
-         * Otherwise, window_size == 2*WSIZE so more >= 2.
-         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
-         */
-        Assert(more >= 2, "more < 2");
-
-        n = read_buf(s->strm, (charf *)s->window + s->strstart + s->lookahead,
-                     more);
-        s->lookahead += n;
-
-        /* Initialize the hash value now that we have some input: */
-        if (s->lookahead >= MIN_MATCH) {
-            s->ins_h = s->window[s->strstart];
-            UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-            Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-        }
-        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
-         * but this is not important since only literal bytes will be emitted.
-         */
-
-    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
-}
-
-/* ===========================================================================
- * Flush the current block, with given end-of-file flag.
- * IN assertion: strstart is set to the end of the current match.
- */
-#define FLUSH_BLOCK_ONLY(s, flush) { \
-   ct_flush_block(s, (s->block_start >= 0L ? \
-           (charf *)&s->window[(unsigned)s->block_start] : \
-           (charf *)Z_NULL), (long)s->strstart - s->block_start, (flush)); \
-   s->block_start = s->strstart; \
-   flush_pending(s->strm); \
-   Tracev((stderr,"[FLUSH]")); \
-}
-
-/* Same but force premature exit if necessary. */
-#define FLUSH_BLOCK(s, flush) { \
-   FLUSH_BLOCK_ONLY(s, flush); \
-   if (s->strm->avail_out == 0) return 1; \
-}
-
-/* ===========================================================================
- * Compress as much as possible from the input stream, return true if
- * processing was terminated prematurely (no more input or output space).
- * This function does not perform lazy evaluationof matches and inserts
- * new strings in the dictionary only for unmatched strings or for short
- * matches. It is used only for the fast compression options.
- */
-local int deflate_fast(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head = NIL; /* head of the hash chain */
-    int bflush;     /* set if current block must be flushed */
-
-    s->prev_length = MIN_MATCH-1;
-
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) return 1;
-
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         * At this point we have always match_length < MIN_MATCH
-         */
-        if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            if (s->strategy != Z_HUFFMAN_ONLY) {
-                s->match_length = longest_match (s, hash_head);
-            }
-            /* longest_match() sets match_start */
-
-            if (s->match_length > s->lookahead) s->match_length = s->lookahead;
-        }
-        if (s->match_length >= MIN_MATCH) {
-            check_match(s, s->strstart, s->match_start, s->match_length);
-
-            bflush = ct_tally(s, s->strstart - s->match_start,
-                              s->match_length - MIN_MATCH);
-
-            s->lookahead -= s->match_length;
-
-            /* Insert new strings in the hash table only if the match length
-             * is not too large. This saves time but degrades compression.
-             */
-            if (s->match_length <= s->max_insert_length &&
-                s->lookahead >= MIN_MATCH) {
-                s->match_length--; /* string at strstart already in hash table */
-                do {
-                    s->strstart++;
-                    INSERT_STRING(s, s->strstart, hash_head);
-                    /* strstart never exceeds WSIZE-MAX_MATCH, so there are
-                     * always MIN_MATCH bytes ahead.
-                     */
-                } while (--s->match_length != 0);
-                s->strstart++; 
-            } else {
-                s->strstart += s->match_length;
-                s->match_length = 0;
-                s->ins_h = s->window[s->strstart];
-                UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-                Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-                /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
-                 * matter since it will be recomputed at next deflate call.
-                 */
-            }
-        } else {
-            /* No match, output a literal byte */
-            Tracevv((stderr,"%c", s->window[s->strstart]));
-            bflush = ct_tally (s, 0, s->window[s->strstart]);
-            s->lookahead--;
-            s->strstart++; 
-        }
-        if (bflush) FLUSH_BLOCK(s, Z_NO_FLUSH);
-    }
-    FLUSH_BLOCK(s, flush);
-    return 0; /* normal exit */
-}
-
-/* ===========================================================================
- * Same as above, but achieves better compression. We use a lazy
- * evaluation for matches: a match is finally adopted only if there is
- * no better match at the next window position.
- */
-local int deflate_slow(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head = NIL;    /* head of hash chain */
-    int bflush;              /* set if current block must be flushed */
-
-    /* Process the input block. */
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) return 1;
-
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         */
-        s->prev_length = s->match_length, s->prev_match = s->match_start;
-        s->match_length = MIN_MATCH-1;
-
-        if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
-            s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            if (s->strategy != Z_HUFFMAN_ONLY) {
-                s->match_length = longest_match (s, hash_head);
-            }
-            /* longest_match() sets match_start */
-            if (s->match_length > s->lookahead) s->match_length = s->lookahead;
-
-            if (s->match_length <= 5 && (s->strategy == Z_FILTERED ||
-                 (s->match_length == MIN_MATCH &&
-                  s->strstart - s->match_start > TOO_FAR))) {
-
-                /* If prev_match is also MIN_MATCH, match_start is garbage
-                 * but we will ignore the current match anyway.
-                 */
-                s->match_length = MIN_MATCH-1;
-            }
-        }
-        /* If there was a match at the previous step and the current
-         * match is not better, output the previous match:
-         */
-        if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
-            uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
-            /* Do not insert strings in hash table beyond this. */
-
-            check_match(s, s->strstart-1, s->prev_match, s->prev_length);
-
-            bflush = ct_tally(s, s->strstart -1 - s->prev_match,
-                              s->prev_length - MIN_MATCH);
-
-            /* Insert in hash table all strings up to the end of the match.
-             * strstart-1 and strstart are already inserted. If there is not
-             * enough lookahead, the last two strings are not inserted in
-             * the hash table.
-             */
-            s->lookahead -= s->prev_length-1;
-            s->prev_length -= 2;
-            do {
-                if (++s->strstart <= max_insert) {
-                    INSERT_STRING(s, s->strstart, hash_head);
-                }
-            } while (--s->prev_length != 0);
-            s->match_available = 0;
-            s->match_length = MIN_MATCH-1;
-            s->strstart++;
-
-            if (bflush) FLUSH_BLOCK(s, Z_NO_FLUSH);
-
-        } else if (s->match_available) {
-            /* If there was no match at the previous position, output a
-             * single literal. If there was a match but the current match
-             * is longer, truncate the previous match to a single literal.
-             */
-            Tracevv((stderr,"%c", s->window[s->strstart-1]));
-            if (ct_tally (s, 0, s->window[s->strstart-1])) {
-                FLUSH_BLOCK_ONLY(s, Z_NO_FLUSH);
-            }
-            s->strstart++;
-            s->lookahead--;
-            if (s->strm->avail_out == 0) return 1;
-        } else {
-            /* There is no previous match to compare with, wait for
-             * the next step to decide.
-             */
-            s->match_available = 1;
-            s->strstart++;
-            s->lookahead--;
-        }
-    }
-    Assert (flush != Z_NO_FLUSH, "no flush?");
-    if (s->match_available) {
-        Tracevv((stderr,"%c", s->window[s->strstart-1]));
-        ct_tally (s, 0, s->window[s->strstart-1]);
-        s->match_available = 0;
-    }
-    FLUSH_BLOCK(s, flush);
-    return 0;
-}
-
-
-/*+++++*/
-/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process uses several Huffman trees. The more
- *      common source values are represented by shorter bit sequences.
- *
- *      Each code tree is stored in a compressed form which is itself
- * a Huffman encoding of the lengths of all the code strings (in
- * ascending order by source values).  The actual code strings are
- * reconstructed from the lengths in the inflate process, as described
- * in the deflate specification.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- *      Storer, James A.
- *          Data Compression:  Methods and Theory, pp. 49-50.
- *          Computer Science Press, 1988.  ISBN 0-7167-8156-5.
- *
- *      Sedgewick, R.
- *          Algorithms, p290.
- *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
- */
-
-/* From: trees.c,v 1.5 1995/05/03 17:27:12 jloup Exp */
-
-#ifdef DEBUG_ZLIB
-#  include <ctype.h>
-#endif
-
-/* ===========================================================================
- * Constants
- */
-
-#define MAX_BL_BITS 7
-/* Bit length codes must not exceed MAX_BL_BITS bits */
-
-#define END_BLOCK 256
-/* end of block literal code */
-
-#define REP_3_6      16
-/* repeat previous bit length 3-6 times (2 bits of repeat count) */
-
-#define REPZ_3_10    17
-/* repeat a zero length 3-10 times  (3 bits of repeat count) */
-
-#define REPZ_11_138  18
-/* repeat a zero length 11-138 times  (7 bits of repeat count) */
-
-local int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
-   = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
-
-local int extra_dbits[D_CODES] /* extra bits for each distance code */
-   = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
-
-local int extra_blbits[BL_CODES]/* extra bits for each bit length code */
-   = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
-
-local uch bl_order[BL_CODES]
-   = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
-/* The lengths of the bit length codes are sent in order of decreasing
- * probability, to avoid transmitting the lengths for unused bit length codes.
- */
-
-#define Buf_size (8 * 2*sizeof(char))
-/* Number of bits used within bi_buf. (bi_buf might be implemented on
- * more than 16 bits on some systems.)
- */
-
-/* ===========================================================================
- * Local data. These are initialized only once.
- * To do: initialize at compile time to be completely reentrant. ???
- */
-
-local ct_data static_ltree[L_CODES+2];
-/* The static literal tree. Since the bit lengths are imposed, there is no
- * need for the L_CODES extra codes used during heap construction. However
- * The codes 286 and 287 are needed to build a canonical tree (see ct_init
- * below).
- */
-
-local ct_data static_dtree[D_CODES];
-/* The static distance tree. (Actually a trivial tree since all codes use
- * 5 bits.)
- */
-
-local uch dist_code[512];
-/* distance codes. The first 256 values correspond to the distances
- * 3 .. 258, the last 256 values correspond to the top 8 bits of
- * the 15 bit distances.
- */
-
-local uch length_code[MAX_MATCH-MIN_MATCH+1];
-/* length code for each normalized match length (0 == MIN_MATCH) */
-
-local int base_length[LENGTH_CODES];
-/* First normalized length for each code (0 = MIN_MATCH) */
-
-local int base_dist[D_CODES];
-/* First normalized distance for each code (0 = distance of 1) */
-
-struct static_tree_desc_s {
-    ct_data *static_tree;        /* static tree or NULL */
-    intf    *extra_bits;         /* extra bits for each code or NULL */
-    int     extra_base;          /* base index for extra_bits */
-    int     elems;               /* max number of elements in the tree */
-    int     max_length;          /* max bit length for the codes */
-};
-
-local static_tree_desc  static_l_desc =
-{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
-
-local static_tree_desc  static_d_desc =
-{static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
-
-local static_tree_desc  static_bl_desc =
-{(ct_data *)0, extra_blbits, 0,      BL_CODES, MAX_BL_BITS};
-
-/* ===========================================================================
- * Local (static) routines in this file.
- */
-
-local void ct_static_init OF((void));
-local void init_block     OF((deflate_state *s));
-local void pqdownheap     OF((deflate_state *s, ct_data *tree, int k));
-local void gen_bitlen     OF((deflate_state *s, tree_desc *desc));
-local void gen_codes      OF((ct_data *tree, int max_code, ushf *bl_count));
-local void build_tree     OF((deflate_state *s, tree_desc *desc));
-local void scan_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local void send_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local int  build_bl_tree  OF((deflate_state *s));
-local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
-                              int blcodes));
-local void compress_block OF((deflate_state *s, ct_data *ltree,
-                              ct_data *dtree));
-local void set_data_type  OF((deflate_state *s));
-local unsigned bi_reverse OF((unsigned value, int length));
-local void bi_windup      OF((deflate_state *s));
-local void bi_flush       OF((deflate_state *s));
-local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
-                              int header));
-
-#ifndef DEBUG_ZLIB
-#  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
-   /* Send a code of the given tree. c and tree must not have side effects */
-
-#else /* DEBUG_ZLIB */
-#  define send_code(s, c, tree) \
-     { if (verbose>1) fprintf(stderr,"\ncd %3d ",(c)); \
-       send_bits(s, tree[c].Code, tree[c].Len); }
-#endif
-
-#define d_code(dist) \
-   ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. dist_code[256] and dist_code[257] are never
- * used.
- */
-
-/* ===========================================================================
- * Output a short LSB first on the stream.
- * IN assertion: there is enough room in pendingBuf.
- */
-#define put_short(s, w) { \
-    put_byte(s, (uch)((w) & 0xff)); \
-    put_byte(s, (uch)((ush)(w) >> 8)); \
-}
-
-/* ===========================================================================
- * Send a value on a given number of bits.
- * IN assertion: length <= 16 and value fits in length bits.
- */
-#ifdef DEBUG_ZLIB
-local void send_bits      OF((deflate_state *s, int value, int length));
-
-local void send_bits(s, value, length)
-    deflate_state *s;
-    int value;  /* value to send */
-    int length; /* number of bits */
-{
-    Tracev((stderr," l %2d v %4x ", length, value));
-    Assert(length > 0 && length <= 15, "invalid length");
-    s->bits_sent += (ulg)length;
-
-    /* If not enough room in bi_buf, use (valid) bits from bi_buf and
-     * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
-     * unused bits in value.
-     */
-    if (s->bi_valid > (int)Buf_size - length) {
-        s->bi_buf |= (value << s->bi_valid);
-        put_short(s, s->bi_buf);
-        s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
-        s->bi_valid += length - Buf_size;
-    } else {
-        s->bi_buf |= value << s->bi_valid;
-        s->bi_valid += length;
-    }
-}
-#else /* !DEBUG_ZLIB */
-
-#define send_bits(s, value, length) \
-{ int len = length;\
-  if (s->bi_valid > (int)Buf_size - len) {\
-    int val = value;\
-    s->bi_buf |= (val << s->bi_valid);\
-    put_short(s, s->bi_buf);\
-    s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
-    s->bi_valid += len - Buf_size;\
-  } else {\
-    s->bi_buf |= (value) << s->bi_valid;\
-    s->bi_valid += len;\
-  }\
-}
-#endif /* DEBUG_ZLIB */
-
-
-#define MAX(a,b) (a >= b ? a : b)
-/* the arguments must not have side effects */
-
-/* ===========================================================================
- * Initialize the various 'constant' tables.
- * To do: do this at compile time.
- */
-local void ct_static_init()
-{
-    int n;        /* iterates over tree elements */
-    int bits;     /* bit counter */
-    int length;   /* length value */
-    int code;     /* code value */
-    int dist;     /* distance index */
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    /* Initialize the mapping length (0..255) -> length code (0..28) */
-    length = 0;
-    for (code = 0; code < LENGTH_CODES-1; code++) {
-        base_length[code] = length;
-        for (n = 0; n < (1<<extra_lbits[code]); n++) {
-            length_code[length++] = (uch)code;
-        }
-    }
-    Assert (length == 256, "ct_static_init: length != 256");
-    /* Note that the length 255 (match length 258) can be represented
-     * in two different ways: code 284 + 5 bits or code 285, so we
-     * overwrite length_code[255] to use the best encoding:
-     */
-    length_code[length-1] = (uch)code;
-
-    /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
-    dist = 0;
-    for (code = 0 ; code < 16; code++) {
-        base_dist[code] = dist;
-        for (n = 0; n < (1<<extra_dbits[code]); n++) {
-            dist_code[dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "ct_static_init: dist != 256");
-    dist >>= 7; /* from now on, all distances are divided by 128 */
-    for ( ; code < D_CODES; code++) {
-        base_dist[code] = dist << 7;
-        for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
-            dist_code[256 + dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "ct_static_init: 256+dist != 512");
-
-    /* Construct the codes of the static literal tree */
-    for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
-    n = 0;
-    while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
-    while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
-    while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
-    while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
-    /* Codes 286 and 287 do not exist, but we must include them in the
-     * tree construction to get a canonical Huffman tree (longest code
-     * all ones)
-     */
-    gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
-
-    /* The static distance tree is trivial: */
-    for (n = 0; n < D_CODES; n++) {
-        static_dtree[n].Len = 5;
-        static_dtree[n].Code = bi_reverse(n, 5);
-    }
-}
-
-/* ===========================================================================
- * Initialize the tree data structures for a new zlib stream.
- */
-local void ct_init(s)
-    deflate_state *s;
-{
-    if (static_dtree[0].Len == 0) {
-        ct_static_init();              /* To do: at compile time */
-    }
-
-    s->compressed_len = 0L;
-
-    s->l_desc.dyn_tree = s->dyn_ltree;
-    s->l_desc.stat_desc = &static_l_desc;
-
-    s->d_desc.dyn_tree = s->dyn_dtree;
-    s->d_desc.stat_desc = &static_d_desc;
-
-    s->bl_desc.dyn_tree = s->bl_tree;
-    s->bl_desc.stat_desc = &static_bl_desc;
-
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-    s->last_eob_len = 8; /* enough lookahead for inflate */
-#ifdef DEBUG_ZLIB
-    s->bits_sent = 0L;
-#endif
-    s->blocks_in_packet = 0;
-
-    /* Initialize the first block of the first file: */
-    init_block(s);
-}
-
-/* ===========================================================================
- * Initialize a new block.
- */
-local void init_block(s)
-    deflate_state *s;
-{
-    int n; /* iterates over tree elements */
-
-    /* Initialize the trees. */
-    for (n = 0; n < L_CODES;  n++) s->dyn_ltree[n].Freq = 0;
-    for (n = 0; n < D_CODES;  n++) s->dyn_dtree[n].Freq = 0;
-    for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
-
-    s->dyn_ltree[END_BLOCK].Freq = 1;
-    s->opt_len = s->static_len = 0L;
-    s->last_lit = s->matches = 0;
-}
-
-#define SMALLEST 1
-/* Index within the heap array of least frequent node in the Huffman tree */
-
-
-/* ===========================================================================
- * Remove the smallest element from the heap and recreate the heap with
- * one less element. Updates heap and heap_len.
- */
-#define pqremove(s, tree, top) \
-{\
-    top = s->heap[SMALLEST]; \
-    s->heap[SMALLEST] = s->heap[s->heap_len--]; \
-    pqdownheap(s, tree, SMALLEST); \
-}
-
-/* ===========================================================================
- * Compares to subtrees, using the tree depth as tie breaker when
- * the subtrees have equal frequency. This minimizes the worst case length.
- */
-#define smaller(tree, n, m, depth) \
-   (tree[n].Freq < tree[m].Freq || \
-   (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
-
-/* ===========================================================================
- * Restore the heap property by moving down the tree starting at node k,
- * exchanging a node with the smallest of its two sons if necessary, stopping
- * when the heap property is re-established (each father smaller than its
- * two sons).
- */
-local void pqdownheap(s, tree, k)
-    deflate_state *s;
-    ct_data *tree;  /* the tree to restore */
-    int k;               /* node to move down */
-{
-    int v = s->heap[k];
-    int j = k << 1;  /* left son of k */
-    while (j <= s->heap_len) {
-        /* Set j to the smallest of the two sons: */
-        if (j < s->heap_len &&
-            smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
-            j++;
-        }
-        /* Exit if v is smaller than both sons */
-        if (smaller(tree, v, s->heap[j], s->depth)) break;
-
-        /* Exchange v with the smallest son */
-        s->heap[k] = s->heap[j];  k = j;
-
-        /* And continue down the tree, setting j to the left son of k */
-        j <<= 1;
-    }
-    s->heap[k] = v;
-}
-
-/* ===========================================================================
- * Compute the optimal bit lengths for a tree and update the total bit length
- * for the current block.
- * IN assertion: the fields freq and dad are set, heap[heap_max] and
- *    above are the tree nodes sorted by increasing frequency.
- * OUT assertions: the field len is set to the optimal bit length, the
- *     array bl_count contains the frequencies for each bit length.
- *     The length opt_len is updated; static_len is also updated if stree is
- *     not null.
- */
-local void gen_bitlen(s, desc)
-    deflate_state *s;
-    tree_desc *desc;    /* the tree descriptor */
-{
-    ct_data *tree  = desc->dyn_tree;
-    int max_code   = desc->max_code;
-    ct_data *stree = desc->stat_desc->static_tree;
-    intf *extra    = desc->stat_desc->extra_bits;
-    int base       = desc->stat_desc->extra_base;
-    int max_length = desc->stat_desc->max_length;
-    int h;              /* heap index */
-    int n, m;           /* iterate over the tree elements */
-    int bits;           /* bit length */
-    int xbits;          /* extra bits */
-    ush f;              /* frequency */
-    int overflow = 0;   /* number of elements with bit length too large */
-
-    for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
-
-    /* In a first pass, compute the optimal bit lengths (which may
-     * overflow in the case of the bit length tree).
-     */
-    tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
-
-    for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
-        n = s->heap[h];
-        bits = tree[tree[n].Dad].Len + 1;
-        if (bits > max_length) bits = max_length, overflow++;
-        tree[n].Len = (ush)bits;
-        /* We overwrite tree[n].Dad which is no longer needed */
-
-        if (n > max_code) continue; /* not a leaf node */
-
-        s->bl_count[bits]++;
-        xbits = 0;
-        if (n >= base) xbits = extra[n-base];
-        f = tree[n].Freq;
-        s->opt_len += (ulg)f * (bits + xbits);
-        if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
-    }
-    if (overflow == 0) return;
-
-    Trace((stderr,"\nbit length overflow\n"));
-    /* This happens for example on obj2 and pic of the Calgary corpus */
-
-    /* Find the first bit length which could increase: */
-    do {
-        bits = max_length-1;
-        while (s->bl_count[bits] == 0) bits--;
-        s->bl_count[bits]--;      /* move one leaf down the tree */
-        s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
-        s->bl_count[max_length]--;
-        /* The brother of the overflow item also moves one step up,
-         * but this does not affect bl_count[max_length]
-         */
-        overflow -= 2;
-    } while (overflow > 0);
-
-    /* Now recompute all bit lengths, scanning in increasing frequency.
-     * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
-     * lengths instead of fixing only the wrong ones. This idea is taken
-     * from 'ar' written by Haruhiko Okumura.)
-     */
-    for (bits = max_length; bits != 0; bits--) {
-        n = s->bl_count[bits];
-        while (n != 0) {
-            m = s->heap[--h];
-            if (m > max_code) continue;
-            if (tree[m].Len != (unsigned) bits) {
-                Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
-                s->opt_len += ((long)bits - (long)tree[m].Len)
-                              *(long)tree[m].Freq;
-                tree[m].Len = (ush)bits;
-            }
-            n--;
-        }
-    }
-}
-
-/* ===========================================================================
- * Generate the codes for a given tree and bit counts (which need not be
- * optimal).
- * IN assertion: the array bl_count contains the bit length statistics for
- * the given tree and the field len is set for all tree elements.
- * OUT assertion: the field code is set for all tree elements of non
- *     zero code length.
- */
-local void gen_codes (tree, max_code, bl_count)
-    ct_data *tree;             /* the tree to decorate */
-    int max_code;              /* largest code with non zero frequency */
-    ushf *bl_count;            /* number of codes at each bit length */
-{
-    ush next_code[MAX_BITS+1]; /* next code value for each bit length */
-    ush code = 0;              /* running code value */
-    int bits;                  /* bit index */
-    int n;                     /* code index */
-
-    /* The distribution counts are first used to generate the code values
-     * without bit reversal.
-     */
-    for (bits = 1; bits <= MAX_BITS; bits++) {
-        next_code[bits] = code = (code + bl_count[bits-1]) << 1;
-    }
-    /* Check that the bit counts in bl_count are consistent. The last code
-     * must be all ones.
-     */
-    Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
-            "inconsistent bit counts");
-    Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
-
-    for (n = 0;  n <= max_code; n++) {
-        int len = tree[n].Len;
-        if (len == 0) continue;
-        /* Now reverse the bits */
-        tree[n].Code = bi_reverse(next_code[len]++, len);
-
-        Tracec(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
-             n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
-    }
-}
-
-/* ===========================================================================
- * Construct one Huffman tree and assigns the code bit strings and lengths.
- * Update the total bit length for the current block.
- * IN assertion: the field freq is set for all tree elements.
- * OUT assertions: the fields len and code are set to the optimal bit length
- *     and corresponding code. The length opt_len is updated; static_len is
- *     also updated if stree is not null. The field max_code is set.
- */
-local void build_tree(s, desc)
-    deflate_state *s;
-    tree_desc *desc; /* the tree descriptor */
-{
-    ct_data *tree   = desc->dyn_tree;
-    ct_data *stree  = desc->stat_desc->static_tree;
-    int elems       = desc->stat_desc->elems;
-    int n, m;          /* iterate over heap elements */
-    int max_code = -1; /* largest code with non zero frequency */
-    int node;          /* new node being created */
-
-    /* Construct the initial heap, with least frequent element in
-     * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
-     * heap[0] is not used.
-     */
-    s->heap_len = 0, s->heap_max = HEAP_SIZE;
-
-    for (n = 0; n < elems; n++) {
-        if (tree[n].Freq != 0) {
-            s->heap[++(s->heap_len)] = max_code = n;
-            s->depth[n] = 0;
-        } else {
-            tree[n].Len = 0;
-        }
-    }
-
-    /* The pkzip format requires that at least one distance code exists,
-     * and that at least one bit should be sent even if there is only one
-     * possible code. So to avoid special checks later on we force at least
-     * two codes of non zero frequency.
-     */
-    while (s->heap_len < 2) {
-        node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
-        tree[node].Freq = 1;
-        s->depth[node] = 0;
-        s->opt_len--; if (stree) s->static_len -= stree[node].Len;
-        /* node is 0 or 1 so it does not have extra bits */
-    }
-    desc->max_code = max_code;
-
-    /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
-     * establish sub-heaps of increasing lengths:
-     */
-    for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
-
-    /* Construct the Huffman tree by repeatedly combining the least two
-     * frequent nodes.
-     */
-    node = elems;              /* next internal node of the tree */
-    do {
-        pqremove(s, tree, n);  /* n = node of least frequency */
-        m = s->heap[SMALLEST]; /* m = node of next least frequency */
-
-        s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
-        s->heap[--(s->heap_max)] = m;
-
-        /* Create a new node father of n and m */
-        tree[node].Freq = tree[n].Freq + tree[m].Freq;
-        s->depth[node] = (uch) (MAX(s->depth[n], s->depth[m]) + 1);
-        tree[n].Dad = tree[m].Dad = (ush)node;
-#ifdef DUMP_BL_TREE
-        if (tree == s->bl_tree) {
-            fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
-                    node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
-        }
-#endif
-        /* and insert the new node in the heap */
-        s->heap[SMALLEST] = node++;
-        pqdownheap(s, tree, SMALLEST);
-
-    } while (s->heap_len >= 2);
-
-    s->heap[--(s->heap_max)] = s->heap[SMALLEST];
-
-    /* At this point, the fields freq and dad are set. We can now
-     * generate the bit lengths.
-     */
-    gen_bitlen(s, (tree_desc *)desc);
-
-    /* The field len is now set, we can generate the bit codes */
-    gen_codes ((ct_data *)tree, max_code, s->bl_count);
-}
-
-/* ===========================================================================
- * Scan a literal or distance tree to determine the frequencies of the codes
- * in the bit length tree.
- */
-local void scan_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree;   /* the tree to be scanned */
-    int max_code;    /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    if (nextlen == 0) max_count = 138, min_count = 3;
-    tree[max_code+1].Len = (ush)0xffff; /* guard */
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            s->bl_tree[curlen].Freq += count;
-        } else if (curlen != 0) {
-            if (curlen != prevlen) s->bl_tree[curlen].Freq++;
-            s->bl_tree[REP_3_6].Freq++;
-        } else if (count <= 10) {
-            s->bl_tree[REPZ_3_10].Freq++;
-        } else {
-            s->bl_tree[REPZ_11_138].Freq++;
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Send a literal or distance tree in compressed form, using the codes in
- * bl_tree.
- */
-local void send_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree; /* the tree to be scanned */
-    int max_code;       /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    /* tree[max_code+1].Len = -1; */  /* guard already set */
-    if (nextlen == 0) max_count = 138, min_count = 3;
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
-
-        } else if (curlen != 0) {
-            if (curlen != prevlen) {
-                send_code(s, curlen, s->bl_tree); count--;
-            }
-            Assert(count >= 3 && count <= 6, " 3_6?");
-            send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
-
-        } else if (count <= 10) {
-            send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
-
-        } else {
-            send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Construct the Huffman tree for the bit lengths and return the index in
- * bl_order of the last bit length code to send.
- */
-local int build_bl_tree(s)
-    deflate_state *s;
-{
-    int max_blindex;  /* index of last bit length code of non zero freq */
-
-    /* Determine the bit length frequencies for literal and distance trees */
-    scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
-    scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
-
-    /* Build the bit length tree: */
-    build_tree(s, (tree_desc *)(&(s->bl_desc)));
-    /* opt_len now includes the length of the tree representations, except
-     * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
-     */
-
-    /* Determine the number of bit length codes to send. The pkzip format
-     * requires that at least 4 bit length codes be sent. (appnote.txt says
-     * 3 but the actual value used is 4.)
-     */
-    for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
-        if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
-    }
-    /* Update opt_len to include the bit length tree and counts */
-    s->opt_len += 3*(max_blindex+1) + 5+5+4;
-    Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
-            s->opt_len, s->static_len));
-
-    return max_blindex;
-}
-
-/* ===========================================================================
- * Send the header for a block using dynamic Huffman trees: the counts, the
- * lengths of the bit length codes, the literal tree and the distance tree.
- * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
- */
-local void send_all_trees(s, lcodes, dcodes, blcodes)
-    deflate_state *s;
-    int lcodes, dcodes, blcodes; /* number of codes for each tree */
-{
-    int rank;                    /* index in bl_order */
-
-    Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
-    Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
-            "too many codes");
-    Tracev((stderr, "\nbl counts: "));
-    send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
-    send_bits(s, dcodes-1,   5);
-    send_bits(s, blcodes-4,  4); /* not -3 as stated in appnote.txt */
-    for (rank = 0; rank < blcodes; rank++) {
-        Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
-        send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
-    }
-    Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
-    Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
-    Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
-}
-
-/* ===========================================================================
- * Send a stored block
- */
-local void ct_stored_block(s, buf, stored_len, eof)
-    deflate_state *s;
-    charf *buf;       /* input block */
-    ulg stored_len;   /* length of input block */
-    int eof;          /* true if this is the last block for a file */
-{
-    send_bits(s, (STORED_BLOCK<<1)+eof, 3);  /* send block type */
-    s->compressed_len = (s->compressed_len + 3 + 7) & ~7L;
-    s->compressed_len += (stored_len + 4) << 3;
-
-    copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
-}
-
-/* Send just the `stored block' type code without any length bytes or data.
- */
-local void ct_stored_type_only(s)
-    deflate_state *s;
-{
-    send_bits(s, (STORED_BLOCK << 1), 3);
-    bi_windup(s);
-    s->compressed_len = (s->compressed_len + 3) & ~7L;
-}
-
-
-/* ===========================================================================
- * Send one empty static block to give enough lookahead for inflate.
- * This takes 10 bits, of which 7 may remain in the bit buffer.
- * The current inflate code requires 9 bits of lookahead. If the EOB
- * code for the previous block was coded on 5 bits or less, inflate
- * may have only 5+3 bits of lookahead to decode this EOB.
- * (There are no problems if the previous block is stored or fixed.)
- */
-local void ct_align(s)
-    deflate_state *s;
-{
-    send_bits(s, STATIC_TREES<<1, 3);
-    send_code(s, END_BLOCK, static_ltree);
-    s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
-    bi_flush(s);
-    /* Of the 10 bits for the empty block, we have already sent
-     * (10 - bi_valid) bits. The lookahead for the EOB of the previous
-     * block was thus its length plus what we have just sent.
-     */
-    if (s->last_eob_len + 10 - s->bi_valid < 9) {
-        send_bits(s, STATIC_TREES<<1, 3);
-        send_code(s, END_BLOCK, static_ltree);
-        s->compressed_len += 10L;
-        bi_flush(s);
-    }
-    s->last_eob_len = 7;
-}
-
-/* ===========================================================================
- * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file. This function
- * returns the total compressed length for the file so far.
- */
-local ulg ct_flush_block(s, buf, stored_len, flush)
-    deflate_state *s;
-    charf *buf;       /* input block, or NULL if too old */
-    ulg stored_len;   /* length of input block */
-    int flush;        /* Z_FINISH if this is the last block for a file */
-{
-    ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
-    int max_blindex;  /* index of last bit length code of non zero freq */
-    int eof = flush == Z_FINISH;
-
-    ++s->blocks_in_packet;
-
-    /* Check if the file is ascii or binary */
-    if (s->data_type == UNKNOWN) set_data_type(s);
-
-    /* Construct the literal and distance trees */
-    build_tree(s, (tree_desc *)(&(s->l_desc)));
-    Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
-            s->static_len));
-
-    build_tree(s, (tree_desc *)(&(s->d_desc)));
-    Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
-            s->static_len));
-    /* At this point, opt_len and static_len are the total bit lengths of
-     * the compressed block data, excluding the tree representations.
-     */
-
-    /* Build the bit length tree for the above two trees, and get the index
-     * in bl_order of the last bit length code to send.
-     */
-    max_blindex = build_bl_tree(s);
-
-    /* Determine the best encoding. Compute first the block length in bytes */
-    opt_lenb = (s->opt_len+3+7)>>3;
-    static_lenb = (s->static_len+3+7)>>3;
-
-    Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
-            opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
-            s->last_lit));
-
-    if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
-
-    /* If compression failed and this is the first and last block,
-     * and if the .zip file can be seeked (to rewrite the local header),
-     * the whole file is transformed into a stored file:
-     */
-#ifdef STORED_FILE_OK
-#  ifdef FORCE_STORED_FILE
-    if (eof && compressed_len == 0L) /* force stored file */
-#  else
-    if (stored_len <= opt_lenb && eof && s->compressed_len==0L && seekable())
-#  endif
-    {
-        /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */
-        if (buf == (charf*)0) error ("block vanished");
-
-        copy_block(buf, (unsigned)stored_len, 0); /* without header */
-        s->compressed_len = stored_len << 3;
-        s->method = STORED;
-    } else
-#endif /* STORED_FILE_OK */
-
-    /* For Z_PACKET_FLUSH, if we don't achieve the required minimum
-     * compression, and this block contains all the data since the last
-     * time we used Z_PACKET_FLUSH, then just omit this block completely
-     * from the output.
-     */
-    if (flush == Z_PACKET_FLUSH && s->blocks_in_packet == 1
-	&& opt_lenb > stored_len - s->minCompr) {
-	s->blocks_in_packet = 0;
-	/* output nothing */
-    } else
-
-#ifdef FORCE_STORED
-    if (buf != (char*)0) /* force stored block */
-#else
-    if (stored_len+4 <= opt_lenb && buf != (char*)0)
-                       /* 4: two words for the lengths */
-#endif
-    {
-        /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
-         * Otherwise we can't have processed more than WSIZE input bytes since
-         * the last block flush, because compression would have been
-         * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
-         * transform a block into a stored block.
-         */
-        ct_stored_block(s, buf, stored_len, eof);
-    } else
-
-#ifdef FORCE_STATIC
-    if (static_lenb >= 0) /* force static trees */
-#else
-    if (static_lenb == opt_lenb)
-#endif
-    {
-        send_bits(s, (STATIC_TREES<<1)+eof, 3);
-        compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
-        s->compressed_len += 3 + s->static_len;
-    } else {
-        send_bits(s, (DYN_TREES<<1)+eof, 3);
-        send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
-                       max_blindex+1);
-        compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
-        s->compressed_len += 3 + s->opt_len;
-    }
-    Assert (s->compressed_len == s->bits_sent, "bad compressed size");
-    init_block(s);
-
-    if (eof) {
-        bi_windup(s);
-        s->compressed_len += 7;  /* align on byte boundary */
-    }
-    Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
-           s->compressed_len-7*eof));
-
-    return s->compressed_len >> 3;
-}
-
-/* ===========================================================================
- * Save the match info and tally the frequency counts. Return true if
- * the current block must be flushed.
- */
-local int ct_tally (s, dist, lc)
-    deflate_state *s;
-    int dist;  /* distance of matched string */
-    int lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */
-{
-    s->d_buf[s->last_lit] = (ush)dist;
-    s->l_buf[s->last_lit++] = (uch)lc;
-    if (dist == 0) {
-        /* lc is the unmatched char */
-        s->dyn_ltree[lc].Freq++;
-    } else {
-        s->matches++;
-        /* Here, lc is the match length - MIN_MATCH */
-        dist--;             /* dist = match distance - 1 */
-        Assert((ush)dist < (ush)MAX_DIST(s) &&
-               (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
-               (ush)d_code(dist) < (ush)D_CODES,  "ct_tally: bad match");
-
-        s->dyn_ltree[length_code[lc]+LITERALS+1].Freq++;
-        s->dyn_dtree[d_code(dist)].Freq++;
-    }
-
-    /* Try to guess if it is profitable to stop the current block here */
-    if (s->level > 2 && (s->last_lit & 0xfff) == 0) {
-        /* Compute an upper bound for the compressed length */
-        ulg out_length = (ulg)s->last_lit*8L;
-        ulg in_length = (ulg)s->strstart - s->block_start;
-        int dcode;
-        for (dcode = 0; dcode < D_CODES; dcode++) {
-            out_length += (ulg)s->dyn_dtree[dcode].Freq *
-                (5L+extra_dbits[dcode]);
-        }
-        out_length >>= 3;
-        Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
-               s->last_lit, in_length, out_length,
-               100L - out_length*100L/in_length));
-        if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
-    }
-    return (s->last_lit == s->lit_bufsize-1);
-    /* We avoid equality with lit_bufsize because of wraparound at 64K
-     * on 16 bit machines and because stored blocks are restricted to
-     * 64K-1 bytes.
-     */
-}
-
-/* ===========================================================================
- * Send the block data compressed using the given Huffman trees
- */
-local void compress_block(s, ltree, dtree)
-    deflate_state *s;
-    ct_data *ltree; /* literal tree */
-    ct_data *dtree; /* distance tree */
-{
-    unsigned dist;      /* distance of matched string */
-    int lc;             /* match length or unmatched char (if dist == 0) */
-    unsigned lx = 0;    /* running index in l_buf */
-    unsigned code;      /* the code to send */
-    int extra;          /* number of extra bits to send */
-
-    if (s->last_lit != 0) do {
-        dist = s->d_buf[lx];
-        lc = s->l_buf[lx++];
-        if (dist == 0) {
-            send_code(s, lc, ltree); /* send a literal byte */
-            Tracecv(isgraph(lc), (stderr," '%c' ", lc));
-        } else {
-            /* Here, lc is the match length - MIN_MATCH */
-            code = length_code[lc];
-            send_code(s, code+LITERALS+1, ltree); /* send the length code */
-            extra = extra_lbits[code];
-            if (extra != 0) {
-                lc -= base_length[code];
-                send_bits(s, lc, extra);       /* send the extra length bits */
-            }
-            dist--; /* dist is now the match distance - 1 */
-            code = d_code(dist);
-            Assert (code < D_CODES, "bad d_code");
-
-            send_code(s, code, dtree);       /* send the distance code */
-            extra = extra_dbits[code];
-            if (extra != 0) {
-                dist -= base_dist[code];
-                send_bits(s, dist, extra);   /* send the extra distance bits */
-            }
-        } /* literal or match pair ? */
-
-        /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
-        Assert(s->pending < s->lit_bufsize + 2*lx, "pendingBuf overflow");
-
-    } while (lx < s->last_lit);
-
-    send_code(s, END_BLOCK, ltree);
-    s->last_eob_len = ltree[END_BLOCK].Len;
-}
-
-/* ===========================================================================
- * Set the data type to ASCII or BINARY, using a crude approximation:
- * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
- * IN assertion: the fields freq of dyn_ltree are set and the total of all
- * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
- */
-local void set_data_type(s)
-    deflate_state *s;
-{
-    int n = 0;
-    unsigned ascii_freq = 0;
-    unsigned bin_freq = 0;
-    while (n < 7)        bin_freq += s->dyn_ltree[n++].Freq;
-    while (n < 128)    ascii_freq += s->dyn_ltree[n++].Freq;
-    while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq;
-    s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? BINARY : ASCII);
-}
-
-/* ===========================================================================
- * Reverse the first len bits of a code, using straightforward code (a faster
- * method would use a table)
- * IN assertion: 1 <= len <= 15
- */
-local unsigned bi_reverse(code, len)
-    unsigned code; /* the value to invert */
-    int len;       /* its bit length */
-{
-    register unsigned res = 0;
-    do {
-        res |= code & 1;
-        code >>= 1, res <<= 1;
-    } while (--len > 0);
-    return res >> 1;
-}
-
-/* ===========================================================================
- * Flush the bit buffer, keeping at most 7 bits in it.
- */
-local void bi_flush(s)
-    deflate_state *s;
-{
-    if (s->bi_valid == 16) {
-        put_short(s, s->bi_buf);
-        s->bi_buf = 0;
-        s->bi_valid = 0;
-    } else if (s->bi_valid >= 8) {
-        put_byte(s, (Byte)s->bi_buf);
-        s->bi_buf >>= 8;
-        s->bi_valid -= 8;
-    }
-}
-
-/* ===========================================================================
- * Flush the bit buffer and align the output on a byte boundary
- */
-local void bi_windup(s)
-    deflate_state *s;
-{
-    if (s->bi_valid > 8) {
-        put_short(s, s->bi_buf);
-    } else if (s->bi_valid > 0) {
-        put_byte(s, (Byte)s->bi_buf);
-    }
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-#ifdef DEBUG_ZLIB
-    s->bits_sent = (s->bits_sent+7) & ~7;
-#endif
-}
-
-/* ===========================================================================
- * Copy a stored block, storing first the length and its
- * one's complement if requested.
- */
-local void copy_block(s, buf, len, header)
-    deflate_state *s;
-    charf    *buf;    /* the input data */
-    unsigned len;     /* its length */
-    int      header;  /* true if block header must be written */
-{
-    bi_windup(s);        /* align on byte boundary */
-    s->last_eob_len = 8; /* enough lookahead for inflate */
-
-    if (header) {
-        put_short(s, (ush)len);   
-        put_short(s, (ush)~len);
-#ifdef DEBUG_ZLIB
-        s->bits_sent += 2*16;
-#endif
-    }
-#ifdef DEBUG_ZLIB
-    s->bits_sent += (ulg)len<<3;
-#endif
-    while (len--) {
-        put_byte(s, *buf++);
-    }
-}
-
-
-/*+++++*/
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state FAR inflate_blocks_statef;
-
-local inflate_blocks_statef * inflate_blocks_new OF((
-    z_stream *z,
-    check_func c,               /* check function */
-    uInt w));                   /* window size */
-
-local int inflate_blocks OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    int));                      /* initial return code */
-
-local void inflate_blocks_reset OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    uLongf *));                  /* check value on output */
-
-local int inflate_blocks_free OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    uLongf *));                  /* check value on output */
-
-local int inflate_addhistory OF((
-    inflate_blocks_statef *,
-    z_stream *));
-
-local int inflate_packet_flush OF((
-    inflate_blocks_statef *));
-
-/*+++++*/
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* Huffman code lookup table entry--this entry is four bytes for machines
-   that have 16-bit pointers (e.g. PC's in the small or medium model). */
-
-typedef struct inflate_huft_s FAR inflate_huft;
-
-struct inflate_huft_s {
-  union {
-    struct {
-      Byte Exop;        /* number of extra bits or operation */
-      Byte Bits;        /* number of bits in this code or subcode */
-    } what;
-    uInt Nalloc;	/* number of these allocated here */
-    Bytef *pad;         /* pad structure to a power of 2 (4 bytes for */
-  } word;               /*  16-bit, 8 bytes for 32-bit machines) */
-  union {
-    uInt Base;          /* literal, length base, or distance base */
-    inflate_huft *Next; /* pointer to next level of table */
-  } more;
-};
-
-#ifdef DEBUG_ZLIB
-  local uInt inflate_hufts;
-#endif
-
-local int inflate_trees_bits OF((
-    uIntf *,                    /* 19 code lengths */
-    uIntf *,                    /* bits tree desired/actual depth */
-    inflate_huft * FAR *,       /* bits tree result */
-    z_stream *));               /* for zalloc, zfree functions */
-
-local int inflate_trees_dynamic OF((
-    uInt,                       /* number of literal/length codes */
-    uInt,                       /* number of distance codes */
-    uIntf *,                    /* that many (total) code lengths */
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *,       /* distance tree result */
-    z_stream *));               /* for zalloc, zfree functions */
-
-local int inflate_trees_fixed OF((
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *));     /* distance tree result */
-
-local int inflate_trees_free OF((
-    inflate_huft *,             /* tables to free */
-    z_stream *));               /* for zfree function */
-
-
-/*+++++*/
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state FAR inflate_codes_statef;
-
-local inflate_codes_statef *inflate_codes_new OF((
-    uInt, uInt,
-    inflate_huft *, inflate_huft *,
-    z_stream *));
-
-local int inflate_codes OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    int));
-
-local void inflate_codes_free OF((
-    inflate_codes_statef *,
-    z_stream *));
-
-
-/*+++++*/
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* inflate private state */
-struct internal_state {
-
-  /* mode */
-  enum {
-      METHOD,   /* waiting for method byte */
-      FLAG,     /* waiting for flag byte */
-      BLOCKS,   /* decompressing blocks */
-      CHECK4,   /* four check bytes to go */
-      CHECK3,   /* three check bytes to go */
-      CHECK2,   /* two check bytes to go */
-      CHECK1,   /* one check byte to go */
-      DONE,     /* finished check, done */
-      BAD}      /* got an error--stay here */
-    mode;               /* current inflate mode */
-
-  /* mode dependent information */
-  union {
-    uInt method;        /* if FLAGS, method byte */
-    struct {
-      uLong was;                /* computed check value */
-      uLong need;               /* stream check value */
-    } check;            /* if CHECK, check values to compare */
-    uInt marker;        /* if BAD, inflateSync's marker bytes count */
-  } sub;        /* submode */
-
-  /* mode independent information */
-  int  nowrap;          /* flag for no wrapper */
-  uInt wbits;           /* log2(window size)  (8..15, defaults to 15) */
-  inflate_blocks_statef 
-    *blocks;            /* current inflate_blocks state */
-
-};
-
-
-int inflateReset(z)
-z_stream *z;
-{
-  uLong c;
-
-  if (z == Z_NULL || z->state == Z_NULL)
-    return Z_STREAM_ERROR;
-  z->total_in = z->total_out = 0;
-  z->msg = Z_NULL;
-  z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
-  inflate_blocks_reset(z->state->blocks, z, &c);
-  Trace((stderr, "inflate: reset\n"));
-  return Z_OK;
-}
-
-
-int inflateEnd(z)
-z_stream *z;
-{
-  uLong c;
-
-  if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->blocks != Z_NULL)
-    inflate_blocks_free(z->state->blocks, z, &c);
-  ZFREE(z, z->state, sizeof(struct internal_state));
-  z->state = Z_NULL;
-  Trace((stderr, "inflate: end\n"));
-  return Z_OK;
-}
-
-
-int inflateInit2(z, w)
-z_stream *z;
-int w;
-{
-  /* initialize state */
-  if (z == Z_NULL)
-    return Z_STREAM_ERROR;
-/*  if (z->zalloc == Z_NULL) z->zalloc = zcalloc; */
-/*  if (z->zfree == Z_NULL) z->zfree = zcfree; */
-  if ((z->state = (struct internal_state FAR *)
-       ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
-    return Z_MEM_ERROR;
-  z->state->blocks = Z_NULL;
-
-  /* handle undocumented nowrap option (no zlib header or check) */
-  z->state->nowrap = 0;
-  if (w < 0)
-  {
-    w = - w;
-    z->state->nowrap = 1;
-  }
-
-  /* set window size */
-  if (w < 8 || w > 15)
-  {
-    inflateEnd(z);
-    return Z_STREAM_ERROR;
-  }
-  z->state->wbits = (uInt)w;
-
-  /* create inflate_blocks state */
-  if ((z->state->blocks =
-       inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, 1 << w))
-      == Z_NULL)
-  {
-    inflateEnd(z);
-    return Z_MEM_ERROR;
-  }
-  Trace((stderr, "inflate: allocated\n"));
-
-  /* reset state */
-  inflateReset(z);
-  return Z_OK;
-}
-
-
-int inflateInit(z)
-z_stream *z;
-{
-  return inflateInit2(z, DEF_WBITS);
-}
-
-
-#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;}
-#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
-
-int inflate(z, f)
-z_stream *z;
-int f;
-{
-  int r;
-  uInt b;
-
-  if (z == Z_NULL || z->next_in == Z_NULL)
-    return Z_STREAM_ERROR;
-  r = Z_BUF_ERROR;
-  while (1) switch (z->state->mode)
-  {
-    case METHOD:
-      NEEDBYTE
-      if (((z->state->sub.method = NEXTBYTE) & 0xf) != DEFLATED)
-      {
-        z->state->mode = BAD;
-        z->msg = "unknown compression method";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
-      {
-        z->state->mode = BAD;
-        z->msg = "invalid window size";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      z->state->mode = FLAG;
-    case FLAG:
-      NEEDBYTE
-      if ((b = NEXTBYTE) & 0x20)
-      {
-        z->state->mode = BAD;
-        z->msg = "invalid reserved bit";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      if (((z->state->sub.method << 8) + b) % 31)
-      {
-        z->state->mode = BAD;
-        z->msg = "incorrect header check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Trace((stderr, "inflate: zlib header ok\n"));
-      z->state->mode = BLOCKS;
-    case BLOCKS:
-      r = inflate_blocks(z->state->blocks, z, r);
-      if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0)
-	  r = inflate_packet_flush(z->state->blocks);
-      if (r == Z_DATA_ERROR)
-      {
-        z->state->mode = BAD;
-        z->state->sub.marker = 0;       /* can try inflateSync */
-        break;
-      }
-      if (r != Z_STREAM_END)
-        return r;
-      r = Z_OK;
-      inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
-      if (z->state->nowrap)
-      {
-        z->state->mode = DONE;
-        break;
-      }
-      z->state->mode = CHECK4;
-    case CHECK4:
-      NEEDBYTE
-      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
-      z->state->mode = CHECK3;
-    case CHECK3:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
-      z->state->mode = CHECK2;
-    case CHECK2:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
-      z->state->mode = CHECK1;
-    case CHECK1:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE;
-
-      if (z->state->sub.check.was != z->state->sub.check.need)
-      {
-        z->state->mode = BAD;
-        z->msg = "incorrect data check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Trace((stderr, "inflate: zlib check ok\n"));
-      z->state->mode = DONE;
-    case DONE:
-      return Z_STREAM_END;
-    case BAD:
-      return Z_DATA_ERROR;
-    default:
-      return Z_STREAM_ERROR;
-  }
-
- empty:
-  if (f != Z_PACKET_FLUSH)
-    return r;
-  z->state->mode = BAD;
-  z->state->sub.marker = 0;       /* can try inflateSync */
-  return Z_DATA_ERROR;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output.  The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS).  On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-
-int inflateIncomp(z)
-z_stream *z;
-{
-    if (z->state->mode != BLOCKS)
-	return Z_DATA_ERROR;
-    return inflate_addhistory(z->state->blocks, z);
-}
-
-
-int inflateSync(z)
-z_stream *z;
-{
-  uInt n;       /* number of bytes to look at */
-  Bytef *p;     /* pointer to bytes */
-  uInt m;       /* number of marker bytes found in a row */
-  uLong r, w;   /* temporaries to save total_in and total_out */
-
-  /* set up */
-  if (z == Z_NULL || z->state == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->mode != BAD)
-  {
-    z->state->mode = BAD;
-    z->state->sub.marker = 0;
-  }
-  if ((n = z->avail_in) == 0)
-    return Z_BUF_ERROR;
-  p = z->next_in;
-  m = z->state->sub.marker;
-
-  /* search */
-  while (n && m < 4)
-  {
-    if (*p == (Byte)(m < 2 ? 0 : 0xff))
-      m++;
-    else if (*p)
-      m = 0;
-    else
-      m = 4 - m;
-    p++, n--;
-  }
-
-  /* restore */
-  z->total_in += p - z->next_in;
-  z->next_in = p;
-  z->avail_in = n;
-  z->state->sub.marker = m;
-
-  /* return no joy or set up to restart on a new block */
-  if (m != 4)
-    return Z_DATA_ERROR;
-  r = z->total_in;  w = z->total_out;
-  inflateReset(z);
-  z->total_in = r;  z->total_out = w;
-  z->state->mode = BLOCKS;
-  return Z_OK;
-}
-
-#undef NEEDBYTE
-#undef NEXTBYTE
-
-/*+++++*/
-/* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
-  /* mode */
-  enum {
-      TYPE,     /* get type bits (3, including end bit) */
-      LENS,     /* get lengths for stored */
-      STORED,   /* processing stored block */
-      TABLE,    /* get table lengths */
-      BTREE,    /* get bit lengths tree for a dynamic block */
-      DTREE,    /* get length, distance trees for a dynamic block */
-      CODES,    /* processing fixed or dynamic block */
-      DRY,      /* output remaining window bytes */
-      DONEB,     /* finished last block, done */
-      BADB}      /* got a data error--stuck here */
-    mode;               /* current inflate_block mode */
-
-  /* mode dependent information */
-  union {
-    uInt left;          /* if STORED, bytes left to copy */
-    struct {
-      uInt table;               /* table lengths (14 bits) */
-      uInt index;               /* index into blens (or border) */
-      uIntf *blens;             /* bit lengths of codes */
-      uInt bb;                  /* bit length tree depth */
-      inflate_huft *tb;         /* bit length decoding tree */
-      int nblens;		/* # elements allocated at blens */
-    } trees;            /* if DTREE, decoding info for trees */
-    struct {
-      inflate_huft *tl, *td;    /* trees to free */
-      inflate_codes_statef 
-         *codes;
-    } decode;           /* if CODES, current state */
-  } sub;                /* submode */
-  uInt last;            /* true if this block is the last block */
-
-  /* mode independent information */
-  uInt bitk;            /* bits in bit buffer */
-  uLong bitb;           /* bit buffer */
-  Bytef *window;        /* sliding window */
-  Bytef *end;           /* one byte after sliding window */
-  Bytef *read;          /* window read pointer */
-  Bytef *write;         /* window write pointer */
-  check_func checkfn;   /* check function */
-  uLong check;          /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/*   update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return inflate_flush(s,z,r);}
-/*   get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/*   output bytes */
-#define WAVAIL (q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=WAVAIL;}
-#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=WAVAIL;}}
-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/*   load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/* And'ing with mask[n] masks the lower n bits */
-local uInt inflate_mask[] = {
-    0x0000,
-    0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
-    0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    int));
-
-/*+++++*/
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-local int inflate_fast OF((
-    uInt,
-    uInt,
-    inflate_huft *,
-    inflate_huft *,
-    inflate_blocks_statef *,
-    z_stream *));
-
-
-/*+++++*/
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* Table for deflate from PKZIP's appnote.txt. */
-local uInt border[] = { /* Order of the bit length code lengths */
-        16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
-   Notes beyond the 1.93a appnote.txt:
-
-   1. Distance pointers never point before the beginning of the output
-      stream.
-   2. Distance pointers can point back across blocks, up to 32k away.
-   3. There is an implied maximum of 7 bits for the bit length table and
-      15 bits for the actual data.
-   4. If only one code exists, then it is encoded using one bit.  (Zero
-      would be more efficient, but perhaps a little confusing.)  If two
-      codes exist, they are coded using one bit each (0 and 1).
-   5. There is no way of sending zero distance codes--a dummy must be
-      sent if there are none.  (History: a pre 2.0 version of PKZIP would
-      store blocks with no distance codes, but this was discovered to be
-      too harsh a criterion.)  Valid only for 1.93a.  2.04c does allow
-      zero distance codes, which is sent as one code of zero bits in
-      length.
-   6. There are up to 286 literal/length codes.  Code 256 represents the
-      end-of-block.  Note however that the static length tree defines
-      288 codes just to fill out the Huffman codes.  Codes 286 and 287
-      cannot be used though, since there is no length base or extra bits
-      defined for them.  Similarily, there are up to 30 distance codes.
-      However, static trees define 32 codes (all 5 bits) to fill out the
-      Huffman codes, but the last two had better not show up in the data.
-   7. Unzip can check dynamic Huffman blocks for complete code sets.
-      The exception is that a single code would not be complete (see #4).
-   8. The five bits following the block type is really the number of
-      literal codes sent minus 257.
-   9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
-      (1+6+6).  Therefore, to output three times the length, you output
-      three codes (1+1+1), whereas to output four times the same length,
-      you only need two codes (1+3).  Hmm.
-  10. In the tree reconstruction algorithm, Code = Code + Increment
-      only if BitLength(i) is not zero.  (Pretty obvious.)
-  11. Correction: 4 Bits: # of Bit Length codes - 4     (4 - 19)
-  12. Note: length code 284 can represent 227-258, but length code 285
-      really is 258.  The last length deserves its own, short code
-      since it gets used a lot in very redundant files.  The length
-      258 is special since 258 - 3 (the min match length) is 255.
-  13. The literal/length and distance code bit lengths are read as a
-      single stream of lengths.  It is possible (and advantageous) for
-      a repeat code (16, 17, or 18) to go across the boundary between
-      the two sets of lengths.
- */
-
-
-local void inflate_blocks_reset(s, z, c)
-inflate_blocks_statef *s;
-z_stream *z;
-uLongf *c;
-{
-  if (s->checkfn != Z_NULL)
-    *c = s->check;
-  if (s->mode == BTREE || s->mode == DTREE)
-    ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
-  if (s->mode == CODES)
-  {
-    inflate_codes_free(s->sub.decode.codes, z);
-    inflate_trees_free(s->sub.decode.td, z);
-    inflate_trees_free(s->sub.decode.tl, z);
-  }
-  s->mode = TYPE;
-  s->bitk = 0;
-  s->bitb = 0;
-  s->read = s->write = s->window;
-  if (s->checkfn != Z_NULL)
-    s->check = (*s->checkfn)(0L, Z_NULL, 0);
-  Trace((stderr, "inflate:   blocks reset\n"));
-}
-
-
-local inflate_blocks_statef *inflate_blocks_new(z, c, w)
-z_stream *z;
-check_func c;
-uInt w;
-{
-  inflate_blocks_statef *s;
-
-  if ((s = (inflate_blocks_statef *)ZALLOC
-       (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
-    return s;
-  if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
-  {
-    ZFREE(z, s, sizeof(struct inflate_blocks_state));
-    return Z_NULL;
-  }
-  s->end = s->window + w;
-  s->checkfn = c;
-  s->mode = TYPE;
-  Trace((stderr, "inflate:   blocks allocated\n"));
-  inflate_blocks_reset(s, z, &s->check);
-  return s;
-}
-
-
-local int inflate_blocks(s, z, r)
-inflate_blocks_statef *s;
-z_stream *z;
-int r;
-{
-  uInt t;               /* temporary storage */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input based on current state */
-  while (1) switch (s->mode)
-  {
-    case TYPE:
-      NEEDBITS(3)
-      t = (uInt)b & 7;
-      s->last = t & 1;
-      switch (t >> 1)
-      {
-        case 0:                         /* stored */
-          Trace((stderr, "inflate:     stored block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          t = k & 7;                    /* go to byte boundary */
-          DUMPBITS(t)
-          s->mode = LENS;               /* get length of stored block */
-          break;
-        case 1:                         /* fixed */
-          Trace((stderr, "inflate:     fixed codes block%s\n",
-                 s->last ? " (last)" : ""));
-          {
-            uInt bl, bd;
-            inflate_huft *tl, *td;
-
-            inflate_trees_fixed(&bl, &bd, &tl, &td);
-            s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
-            if (s->sub.decode.codes == Z_NULL)
-            {
-              r = Z_MEM_ERROR;
-              LEAVE
-            }
-            s->sub.decode.tl = Z_NULL;  /* don't try to free these */
-            s->sub.decode.td = Z_NULL;
-          }
-          DUMPBITS(3)
-          s->mode = CODES;
-          break;
-        case 2:                         /* dynamic */
-          Trace((stderr, "inflate:     dynamic codes block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          s->mode = TABLE;
-          break;
-        case 3:                         /* illegal */
-          DUMPBITS(3)
-          s->mode = BADB;
-          z->msg = "invalid block type";
-          r = Z_DATA_ERROR;
-          LEAVE
-      }
-      break;
-    case LENS:
-      NEEDBITS(32)
-      if (((~b) >> 16) != (b & 0xffff))
-      {
-        s->mode = BADB;
-        z->msg = "invalid stored block lengths";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-      s->sub.left = (uInt)b & 0xffff;
-      b = k = 0;                      /* dump bits */
-      Tracev((stderr, "inflate:       stored length %u\n", s->sub.left));
-      s->mode = s->sub.left ? STORED : TYPE;
-      break;
-    case STORED:
-      if (n == 0)
-        LEAVE
-      NEEDOUT
-      t = s->sub.left;
-      if (t > n) t = n;
-      if (t > m) t = m;
-      zmemcpy(q, p, t);
-      p += t;  n -= t;
-      q += t;  m -= t;
-      if ((s->sub.left -= t) != 0)
-        break;
-      Tracev((stderr, "inflate:       stored end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      s->mode = s->last ? DRY : TYPE;
-      break;
-    case TABLE:
-      NEEDBITS(14)
-      s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
-      if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
-      {
-        s->mode = BADB;
-        z->msg = "too many length or distance symbols";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-#endif
-      t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
-      if (t < 19)
-        t = 19;
-      if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
-      {
-        r = Z_MEM_ERROR;
-        LEAVE
-      }
-      s->sub.trees.nblens = t;
-      DUMPBITS(14)
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       table sizes ok\n"));
-      s->mode = BTREE;
-    case BTREE:
-      while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
-      {
-        NEEDBITS(3)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
-        DUMPBITS(3)
-      }
-      while (s->sub.trees.index < 19)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
-      s->sub.trees.bb = 7;
-      t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
-                             &s->sub.trees.tb, z);
-      if (t != Z_OK)
-      {
-        r = t;
-        if (r == Z_DATA_ERROR)
-          s->mode = BADB;
-        LEAVE
-      }
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       bits tree ok\n"));
-      s->mode = DTREE;
-    case DTREE:
-      while (t = s->sub.trees.table,
-             s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
-      {
-        inflate_huft *h;
-        uInt i, j, c;
-
-        t = s->sub.trees.bb;
-        NEEDBITS(t)
-        h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
-        t = h->word.what.Bits;
-        c = h->more.Base;
-        if (c < 16)
-        {
-          DUMPBITS(t)
-          s->sub.trees.blens[s->sub.trees.index++] = c;
-        }
-        else /* c == 16..18 */
-        {
-          i = c == 18 ? 7 : c - 14;
-          j = c == 18 ? 11 : 3;
-          NEEDBITS(t + i)
-          DUMPBITS(t)
-          j += (uInt)b & inflate_mask[i];
-          DUMPBITS(i)
-          i = s->sub.trees.index;
-          t = s->sub.trees.table;
-          if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
-              (c == 16 && i < 1))
-          {
-            s->mode = BADB;
-            z->msg = "invalid bit length repeat";
-            r = Z_DATA_ERROR;
-            LEAVE
-          }
-          c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
-          do {
-            s->sub.trees.blens[i++] = c;
-          } while (--j);
-          s->sub.trees.index = i;
-        }
-      }
-      inflate_trees_free(s->sub.trees.tb, z);
-      s->sub.trees.tb = Z_NULL;
-      {
-        uInt bl, bd;
-        inflate_huft *tl, *td;
-        inflate_codes_statef *c;
-
-        bl = 9;         /* must be <= 9 for lookahead assumptions */
-        bd = 6;         /* must be <= 9 for lookahead assumptions */
-        t = s->sub.trees.table;
-        t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
-                                  s->sub.trees.blens, &bl, &bd, &tl, &td, z);
-        if (t != Z_OK)
-        {
-          if (t == (uInt)Z_DATA_ERROR)
-            s->mode = BADB;
-          r = t;
-          LEAVE
-        }
-        Tracev((stderr, "inflate:       trees ok\n"));
-        if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
-        {
-          inflate_trees_free(td, z);
-          inflate_trees_free(tl, z);
-          r = Z_MEM_ERROR;
-          LEAVE
-        }
-        ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
-        s->sub.decode.codes = c;
-        s->sub.decode.tl = tl;
-        s->sub.decode.td = td;
-      }
-      s->mode = CODES;
-    case CODES:
-      UPDATE
-      if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
-        return inflate_flush(s, z, r);
-      r = Z_OK;
-      inflate_codes_free(s->sub.decode.codes, z);
-      inflate_trees_free(s->sub.decode.td, z);
-      inflate_trees_free(s->sub.decode.tl, z);
-      LOAD
-      Tracev((stderr, "inflate:       codes end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      if (!s->last)
-      {
-        s->mode = TYPE;
-        break;
-      }
-      if (k > 7)              /* return unused byte, if any */
-      {
-        Assert(k < 16, "inflate_codes grabbed too many bytes")
-        k -= 8;
-        n++;
-        p--;                    /* can always return one */
-      }
-      s->mode = DRY;
-    case DRY:
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      s->mode = DONEB;
-    case DONEB:
-      r = Z_STREAM_END;
-      LEAVE
-    case BADB:
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-}
-
-
-local int inflate_blocks_free(s, z, c)
-inflate_blocks_statef *s;
-z_stream *z;
-uLongf *c;
-{
-  inflate_blocks_reset(s, z, c);
-  ZFREE(z, s->window, s->end - s->window);
-  ZFREE(z, s, sizeof(struct inflate_blocks_state));
-  Trace((stderr, "inflate:   blocks freed\n"));
-  return Z_OK;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output.  The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS).  On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-local int inflate_addhistory(s, z)
-inflate_blocks_statef *s;
-z_stream *z;
-{
-    uLong b;              /* bit buffer */  /* NOT USED HERE */
-    uInt k;               /* bits in bit buffer */ /* NOT USED HERE */
-    uInt t;               /* temporary storage */
-    Bytef *p;             /* input data pointer */
-    uInt n;               /* bytes available there */
-    Bytef *q;             /* output window write pointer */
-    uInt m;               /* bytes to end of window or read pointer */
-
-    if (s->read != s->write)
-	return Z_STREAM_ERROR;
-    if (s->mode != TYPE)
-	return Z_DATA_ERROR;
-
-    /* we're ready to rock */
-    LOAD
-    /* while there is input ready, copy to output buffer, moving
-     * pointers as needed.
-     */
-    while (n) {
-	t = n;  /* how many to do */
-	/* is there room until end of buffer? */
-	if (t > m) t = m;
-	/* update check information */
-	if (s->checkfn != Z_NULL)
-	    s->check = (*s->checkfn)(s->check, q, t);
-	zmemcpy(q, p, t);
-	q += t;
-	p += t;
-	n -= t;
-	z->total_out += t;
-	s->read = q;    /* drag read pointer forward */
-/*      WRAP  */ 	/* expand WRAP macro by hand to handle s->read */
-	if (q == s->end) {
-	    s->read = q = s->window;
-	    m = WAVAIL;
-	}
-    }
-    UPDATE
-    return Z_OK;
-}
-
-
-/*
- * At the end of a Deflate-compressed PPP packet, we expect to have seen
- * a `stored' block type value but not the (zero) length bytes.
- */
-local int inflate_packet_flush(s)
-    inflate_blocks_statef *s;
-{
-    if (s->mode != LENS)
-	return Z_DATA_ERROR;
-    s->mode = TYPE;
-    return Z_OK;
-}
-
-
-/*+++++*/
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-local int huft_build OF((
-    uIntf *,            /* code lengths in bits */
-    uInt,               /* number of codes */
-    uInt,               /* number of "simple" codes */
-    uIntf *,            /* list of base values for non-simple codes */
-    uIntf *,            /* list of extra bits for non-simple codes */
-    inflate_huft * FAR*,/* result: starting table */
-    uIntf *,            /* maximum lookup bits (returns actual) */
-    z_stream *));       /* for zalloc function */
-
-local voidpf falloc OF((
-    voidpf,             /* opaque pointer (not used) */
-    uInt,               /* number of items */
-    uInt));             /* size of item */
-
-local void ffree OF((
-    voidpf q,           /* opaque pointer (not used) */
-    voidpf p,           /* what to free (not used) */
-    uInt n));		/* number of bytes (not used) */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-local uInt cplens[] = { /* Copy lengths for literal codes 257..285 */
-        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
-        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-        /* actually lengths - 2; also see note #13 above about 258 */
-local uInt cplext[] = { /* Extra bits for literal codes 257..285 */
-        0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
-        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */
-local uInt cpdist[] = { /* Copy offsets for distance codes 0..29 */
-        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
-        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-        8193, 12289, 16385, 24577};
-local uInt cpdext[] = { /* Extra bits for distance codes */
-        0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
-        7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
-        12, 12, 13, 13};
-
-/*
-   Huffman code decoding is performed using a multi-level table lookup.
-   The fastest way to decode is to simply build a lookup table whose
-   size is determined by the longest code.  However, the time it takes
-   to build this table can also be a factor if the data being decoded
-   is not very long.  The most common codes are necessarily the
-   shortest codes, so those codes dominate the decoding time, and hence
-   the speed.  The idea is you can have a shorter table that decodes the
-   shorter, more probable codes, and then point to subsidiary tables for
-   the longer codes.  The time it costs to decode the longer codes is
-   then traded against the time it takes to make longer tables.
-
-   This results of this trade are in the variables lbits and dbits
-   below.  lbits is the number of bits the first level table for literal/
-   length codes can decode in one step, and dbits is the same thing for
-   the distance codes.  Subsequent tables are also less than or equal to
-   those sizes.  These values may be adjusted either when all of the
-   codes are shorter than that, in which case the longest code length in
-   bits is used, or when the shortest code is *longer* than the requested
-   table size, in which case the length of the shortest code in bits is
-   used.
-
-   There are two different values for the two tables, since they code a
-   different number of possibilities each.  The literal/length table
-   codes 286 possible values, or in a flat code, a little over eight
-   bits.  The distance table codes 30 possible values, or a little less
-   than five bits, flat.  The optimum values for speed end up being
-   about one bit more than those, so lbits is 8+1 and dbits is 5+1.
-   The optimum values may differ though from machine to machine, and
-   possibly even between compilers.  Your mileage may vary.
- */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15         /* maximum bit length of any code */
-#define N_MAX 288       /* maximum number of codes in any set */
-
-#ifdef DEBUG_ZLIB
-  uInt inflate_hufts;
-#endif
-
-local int huft_build(b, n, s, d, e, t, m, zs)
-uIntf *b;               /* code lengths in bits (all assumed <= BMAX) */
-uInt n;                 /* number of codes (assumed <= N_MAX) */
-uInt s;                 /* number of simple-valued codes (0..s-1) */
-uIntf *d;               /* list of base values for non-simple codes */
-uIntf *e;               /* list of extra bits for non-simple codes */  
-inflate_huft * FAR *t;  /* result: starting table */
-uIntf *m;               /* maximum lookup bits, returns actual */
-z_stream *zs;           /* for zalloc function */
-/* Given a list of code lengths and a maximum table size, make a set of
-   tables to decode that set of codes.  Return Z_OK on success, Z_BUF_ERROR
-   if the given code set is incomplete (the tables are still built in this
-   case), Z_DATA_ERROR if the input is invalid (all zero length codes or an
-   over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */
-{
-
-  uInt a;                       /* counter for codes of length k */
-  uInt c[BMAX+1];               /* bit length count table */
-  uInt f;                       /* i repeats in table every f entries */
-  int g;                        /* maximum code length */
-  int h;                        /* table level */
-  register uInt i;              /* counter, current code */
-  register uInt j;              /* counter */
-  register int k;               /* number of bits in current code */
-  int l;                        /* bits per table (returned in m) */
-  register uIntf *p;            /* pointer into c[], b[], or v[] */
-  inflate_huft *q;              /* points to current table */
-  struct inflate_huft_s r;      /* table entry for structure assignment */
-  inflate_huft *u[BMAX];        /* table stack */
-  uInt v[N_MAX];                /* values in order of bit length */
-  register int w;               /* bits before this table == (l * h) */
-  uInt x[BMAX+1];               /* bit offsets, then code stack */
-  uIntf *xp;                    /* pointer into x */
-  int y;                        /* number of dummy codes added */
-  uInt z;                       /* number of entries in current table */
-
-
-  /* Generate counts for each bit length */
-  p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
-  C4                            /* clear c[]--assume BMAX+1 is 16 */
-  p = b;  i = n;
-  do {
-    c[*p++]++;                  /* assume all entries <= BMAX */
-  } while (--i);
-  if (c[0] == n)                /* null input--all zero length codes */
-  {
-    *t = (inflate_huft *)Z_NULL;
-    *m = 0;
-    return Z_OK;
-  }
-
-
-  /* Find minimum and maximum length, bound *m by those */
-  l = *m;
-  for (j = 1; j <= BMAX; j++)
-    if (c[j])
-      break;
-  k = j;                        /* minimum code length */
-  if ((uInt)l < j)
-    l = j;
-  for (i = BMAX; i; i--)
-    if (c[i])
-      break;
-  g = i;                        /* maximum code length */
-  if ((uInt)l > i)
-    l = i;
-  *m = l;
-
-
-  /* Adjust last length count to fill out codes, if needed */
-  for (y = 1 << j; j < i; j++, y <<= 1)
-    if ((y -= c[j]) < 0)
-      return Z_DATA_ERROR;
-  if ((y -= c[i]) < 0)
-    return Z_DATA_ERROR;
-  c[i] += y;
-
-
-  /* Generate starting offsets into the value table for each length */
-  x[1] = j = 0;
-  p = c + 1;  xp = x + 2;
-  while (--i) {                 /* note that i == g from above */
-    *xp++ = (j += *p++);
-  }
-
-
-  /* Make a table of values in order of bit lengths */
-  p = b;  i = 0;
-  do {
-    if ((j = *p++) != 0)
-      v[x[j]++] = i;
-  } while (++i < n);
-
-
-  /* Generate the Huffman codes and for each, make the table entries */
-  x[0] = i = 0;                 /* first Huffman code is zero */
-  p = v;                        /* grab values in bit order */
-  h = -1;                       /* no tables yet--level -1 */
-  w = -l;                       /* bits decoded == (l * h) */
-  u[0] = (inflate_huft *)Z_NULL;        /* just to keep compilers happy */
-  q = (inflate_huft *)Z_NULL;   /* ditto */
-  z = 0;                        /* ditto */
-
-  /* go through the bit lengths (k already is bits in shortest code) */
-  for (; k <= g; k++)
-  {
-    a = c[k];
-    while (a--)
-    {
-      /* here i is the Huffman code of length k bits for value *p */
-      /* make tables up to required level */
-      while (k > w + l)
-      {
-        h++;
-        w += l;                 /* previous table always l bits */
-
-        /* compute minimum size table less than or equal to l bits */
-        z = (z = g - w) > (uInt)l ? l : z;      /* table size upper limit */
-        if ((f = 1 << (j = k - w)) > a + 1)     /* try a k-w bit table */
-        {                       /* too few codes for k-w bit table */
-          f -= a + 1;           /* deduct codes from patterns left */
-          xp = c + k;
-          if (j < z)
-            while (++j < z)     /* try smaller tables up to z bits */
-            {
-              if ((f <<= 1) <= *++xp)
-                break;          /* enough codes to use up j bits */
-              f -= *xp;         /* else deduct codes from patterns */
-            }
-        }
-        z = 1 << j;             /* table entries for j-bit table */
-
-        /* allocate and link in new table */
-        if ((q = (inflate_huft *)ZALLOC
-             (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
-        {
-          if (h)
-            inflate_trees_free(u[0], zs);
-          return Z_MEM_ERROR;   /* not enough memory */
-        }
-	q->word.Nalloc = z + 1;
-#ifdef DEBUG_ZLIB
-        inflate_hufts += z + 1;
-#endif
-        *t = q + 1;             /* link to list for huft_free() */
-        *(t = &(q->next)) = Z_NULL;
-        u[h] = ++q;             /* table starts after link */
-
-        /* connect to last table, if there is one */
-        if (h)
-        {
-          x[h] = i;             /* save pattern for backing up */
-          r.bits = (Byte)l;     /* bits to dump before this table */
-          r.exop = (Byte)j;     /* bits in this table */
-          r.next = q;           /* pointer to this table */
-          j = i >> (w - l);     /* (get around Turbo C bug) */
-          u[h-1][j] = r;        /* connect to last table */
-        }
-      }
-
-      /* set up table entry in r */
-      r.bits = (Byte)(k - w);
-      if (p >= v + n)
-        r.exop = 128 + 64;      /* out of values--invalid code */
-      else if (*p < s)
-      {
-        r.exop = (Byte)(*p < 256 ? 0 : 32 + 64);     /* 256 is end-of-block */
-        r.base = *p++;          /* simple code is just the value */
-      }
-      else
-      {
-        r.exop = (Byte)e[*p - s] + 16 + 64; /* non-simple--look up in lists */
-        r.base = d[*p++ - s];
-      }
-
-      /* fill code-like entries with r */
-      f = 1 << (k - w);
-      for (j = i >> w; j < z; j += f)
-        q[j] = r;
-
-      /* backwards increment the k-bit code i */
-      for (j = 1 << (k - 1); i & j; j >>= 1)
-        i ^= j;
-      i ^= j;
-
-      /* backup over finished tables */
-      while ((i & ((1 << w) - 1)) != x[h])
-      {
-        h--;                    /* don't need to update q */
-        w -= l;
-      }
-    }
-  }
-
-
-  /* Return Z_BUF_ERROR if we were given an incomplete table */
-  return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
-
-
-local int inflate_trees_bits(c, bb, tb, z)
-uIntf *c;               /* 19 code lengths */
-uIntf *bb;              /* bits tree desired/actual depth */
-inflate_huft * FAR *tb; /* bits tree result */
-z_stream *z;            /* for zfree function */
-{
-  int r;
-
-  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
-  if (r == Z_DATA_ERROR)
-    z->msg = "oversubscribed dynamic bit lengths tree";
-  else if (r == Z_BUF_ERROR)
-  {
-    inflate_trees_free(*tb, z);
-    z->msg = "incomplete dynamic bit lengths tree";
-    r = Z_DATA_ERROR;
-  }
-  return r;
-}
-
-
-local int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z)
-uInt nl;                /* number of literal/length codes */
-uInt nd;                /* number of distance codes */
-uIntf *c;               /* that many (total) code lengths */
-uIntf *bl;              /* literal desired/actual bit depth */
-uIntf *bd;              /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-z_stream *z;            /* for zfree function */
-{
-  int r;
-
-  /* build literal/length tree */
-  if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK)
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = "oversubscribed literal/length tree";
-    else if (r == Z_BUF_ERROR)
-    {
-      inflate_trees_free(*tl, z);
-      z->msg = "incomplete literal/length tree";
-      r = Z_DATA_ERROR;
-    }
-    return r;
-  }
-
-  /* build distance tree */
-  if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK)
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = "oversubscribed literal/length tree";
-    else if (r == Z_BUF_ERROR) {
-#ifdef PKZIP_BUG_WORKAROUND
-      r = Z_OK;
-    }
-#else
-      inflate_trees_free(*td, z);
-      z->msg = "incomplete literal/length tree";
-      r = Z_DATA_ERROR;
-    }
-    inflate_trees_free(*tl, z);
-    return r;
-#endif
-  }
-
-  /* done */
-  return Z_OK;
-}
-
-
-/* build fixed tables only once--keep them here */
-local int fixed_lock = 0;
-local int fixed_built = 0;
-#define FIXEDH 530      /* number of hufts used by fixed tables */
-local uInt fixed_left = FIXEDH;
-local inflate_huft fixed_mem[FIXEDH];
-local uInt fixed_bl;
-local uInt fixed_bd;
-local inflate_huft *fixed_tl;
-local inflate_huft *fixed_td;
-
-
-local voidpf falloc(q, n, s)
-voidpf q;        /* opaque pointer (not used) */
-uInt n;         /* number of items */
-uInt s;         /* size of item */
-{
-  Assert(s == sizeof(inflate_huft) && n <= fixed_left,
-         "inflate_trees falloc overflow");
-  if (q) s++; /* to make some compilers happy */
-  fixed_left -= n;
-  return (voidpf)(fixed_mem + fixed_left);
-}
-
-
-local void ffree(q, p, n)
-voidpf q;
-voidpf p;
-uInt n;
-{
-  Assert(0, "inflate_trees ffree called!");
-  if (q) q = p; /* to make some compilers happy */
-}
-
-
-local int inflate_trees_fixed(bl, bd, tl, td)
-uIntf *bl;               /* literal desired/actual bit depth */
-uIntf *bd;               /* distance desired/actual bit depth */
-inflate_huft * FAR *tl;  /* literal/length tree result */
-inflate_huft * FAR *td;  /* distance tree result */
-{
-  /* build fixed tables if not built already--lock out other instances */
-  while (++fixed_lock > 1)
-    fixed_lock--;
-  if (!fixed_built)
-  {
-    int k;              /* temporary variable */
-    unsigned c[288];    /* length list for huft_build */
-    z_stream z;         /* for falloc function */
-
-    /* set up fake z_stream for memory routines */
-    z.zalloc = falloc;
-    z.zfree = ffree;
-    z.opaque = Z_NULL;
-
-    /* literal table */
-    for (k = 0; k < 144; k++)
-      c[k] = 8;
-    for (; k < 256; k++)
-      c[k] = 9;
-    for (; k < 280; k++)
-      c[k] = 7;
-    for (; k < 288; k++)
-      c[k] = 8;
-    fixed_bl = 7;
-    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
-
-    /* distance table */
-    for (k = 0; k < 30; k++)
-      c[k] = 5;
-    fixed_bd = 5;
-    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
-
-    /* done */
-    fixed_built = 1;
-  }
-  fixed_lock--;
-  *bl = fixed_bl;
-  *bd = fixed_bd;
-  *tl = fixed_tl;
-  *td = fixed_td;
-  return Z_OK;
-}
-
-
-local int inflate_trees_free(t, z)
-inflate_huft *t;        /* table to free */
-z_stream *z;            /* for zfree function */
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
-   list of the tables it made, with the links in a dummy first entry of
-   each table. */
-{
-  register inflate_huft *p, *q;
-
-  /* Go through linked list, freeing from the malloced (t[-1]) address. */
-  p = t;
-  while (p != Z_NULL)
-  {
-    q = (--p)->next;
-    ZFREE(z, p, p->word.Nalloc * sizeof(inflate_huft));
-    p = q;
-  } 
-  return Z_OK;
-}
-
-/*+++++*/
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* inflate codes private state */
-struct inflate_codes_state {
-
-  /* mode */
-  enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-      START,    /* x: set up for LEN */
-      LEN,      /* i: get length/literal/eob next */
-      LENEXT,   /* i: getting length extra (have base) */
-      DIST,     /* i: get distance next */
-      DISTEXT,  /* i: getting distance extra */
-      COPY,     /* o: copying bytes in window, waiting for space */
-      LIT,      /* o: got literal, waiting for output space */
-      WASH,     /* o: got eob, possibly still output waiting */
-      END,      /* x: got eob and all data flushed */
-      BADCODE}  /* x: got error */
-    mode;               /* current inflate_codes mode */
-
-  /* mode dependent information */
-  uInt len;
-  union {
-    struct {
-      inflate_huft *tree;       /* pointer into tree */
-      uInt need;                /* bits needed */
-    } code;             /* if LEN or DIST, where in tree */
-    uInt lit;           /* if LIT, literal */
-    struct {
-      uInt get;                 /* bits to get for extra */
-      uInt dist;                /* distance back to copy from */
-    } copy;             /* if EXT or COPY, where and how much */
-  } sub;                /* submode */
-
-  /* mode independent information */
-  Byte lbits;           /* ltree bits decoded per branch */
-  Byte dbits;           /* dtree bits decoder per branch */
-  inflate_huft *ltree;          /* literal/length/eob tree */
-  inflate_huft *dtree;          /* distance tree */
-
-};
-
-
-local inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
-uInt bl, bd;
-inflate_huft *tl, *td;
-z_stream *z;
-{
-  inflate_codes_statef *c;
-
-  if ((c = (inflate_codes_statef *)
-       ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
-  {
-    c->mode = START;
-    c->lbits = (Byte)bl;
-    c->dbits = (Byte)bd;
-    c->ltree = tl;
-    c->dtree = td;
-    Tracev((stderr, "inflate:       codes new\n"));
-  }
-  return c;
-}
-
-
-local int inflate_codes(s, z, r)
-inflate_blocks_statef *s;
-z_stream *z;
-int r;
-{
-  uInt j;               /* temporary storage */
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  Bytef *f;             /* pointer to copy strings from */
-  inflate_codes_statef *c = s->sub.decode.codes;  /* codes state */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input and output based on current state */
-  while (1) switch (c->mode)
-  {             /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-    case START:         /* x: set up for LEN */
-#ifndef SLOW
-      if (m >= 258 && n >= 10)
-      {
-        UPDATE
-        r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
-        LOAD
-        if (r != Z_OK)
-        {
-          c->mode = r == Z_STREAM_END ? WASH : BADCODE;
-          break;
-        }
-      }
-#endif /* !SLOW */
-      c->sub.code.need = c->lbits;
-      c->sub.code.tree = c->ltree;
-      c->mode = LEN;
-    case LEN:           /* i: get length/literal/eob next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e == 0)               /* literal */
-      {
-        c->sub.lit = t->base;
-        Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                 "inflate:         literal '%c'\n" :
-                 "inflate:         literal 0x%02x\n", t->base));
-        c->mode = LIT;
-        break;
-      }
-      if (e & 16)               /* length */
-      {
-        c->sub.copy.get = e & 15;
-        c->len = t->base;
-        c->mode = LENEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t->next;
-        break;
-      }
-      if (e & 32)               /* end of block */
-      {
-        Tracevv((stderr, "inflate:         end of block\n"));
-        c->mode = WASH;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = "invalid literal/length code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case LENEXT:        /* i: getting length extra (have base) */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->len += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      c->sub.code.need = c->dbits;
-      c->sub.code.tree = c->dtree;
-      Tracevv((stderr, "inflate:         length %u\n", c->len));
-      c->mode = DIST;
-    case DIST:          /* i: get distance next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e & 16)               /* distance */
-      {
-        c->sub.copy.get = e & 15;
-        c->sub.copy.dist = t->base;
-        c->mode = DISTEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t->next;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = "invalid distance code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case DISTEXT:       /* i: getting distance extra */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->sub.copy.dist += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      Tracevv((stderr, "inflate:         distance %u\n", c->sub.copy.dist));
-      c->mode = COPY;
-    case COPY:          /* o: copying bytes in window, waiting for space */
-#ifndef __TURBOC__ /* Turbo C bug for following expression */
-      f = (uInt)(q - s->window) < c->sub.copy.dist ?
-          s->end - (c->sub.copy.dist - (q - s->window)) :
-          q - c->sub.copy.dist;
-#else
-      f = q - c->sub.copy.dist;
-      if ((uInt)(q - s->window) < c->sub.copy.dist)
-        f = s->end - (c->sub.copy.dist - (q - s->window));
-#endif
-      while (c->len)
-      {
-        NEEDOUT
-        OUTBYTE(*f++)
-        if (f == s->end)
-          f = s->window;
-        c->len--;
-      }
-      c->mode = START;
-      break;
-    case LIT:           /* o: got literal, waiting for output space */
-      NEEDOUT
-      OUTBYTE(c->sub.lit)
-      c->mode = START;
-      break;
-    case WASH:          /* o: got eob, possibly more output */
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      c->mode = END;
-    case END:
-      r = Z_STREAM_END;
-      LEAVE
-    case BADCODE:       /* x: got error */
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-}
-
-
-local void inflate_codes_free(c, z)
-inflate_codes_statef *c;
-z_stream *z;
-{
-  ZFREE(z, c, sizeof(struct inflate_codes_state));
-  Tracev((stderr, "inflate:       codes free\n"));
-}
-
-/*+++++*/
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush(s, z, r)
-inflate_blocks_statef *s;
-z_stream *z;
-int r;
-{
-  uInt n;
-  Bytef *p, *q;
-
-  /* local copies of source and destination pointers */
-  p = z->next_out;
-  q = s->read;
-
-  /* compute number of bytes to copy as far as end of window */
-  n = (uInt)((q <= s->write ? s->write : s->end) - q);
-  if (n > z->avail_out) n = z->avail_out;
-  if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-  /* update counters */
-  z->avail_out -= n;
-  z->total_out += n;
-
-  /* update check information */
-  if (s->checkfn != Z_NULL)
-    s->check = (*s->checkfn)(s->check, q, n);
-
-  /* copy as far as end of window */
-  if (p != NULL) {
-    zmemcpy(p, q, n);
-    p += n;
-  }
-  q += n;
-
-  /* see if more to copy at beginning of window */
-  if (q == s->end)
-  {
-    /* wrap pointers */
-    q = s->window;
-    if (s->write == s->end)
-      s->write = s->window;
-
-    /* compute bytes to copy */
-    n = (uInt)(s->write - q);
-    if (n > z->avail_out) n = z->avail_out;
-    if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-    /* update counters */
-    z->avail_out -= n;
-    z->total_out += n;
-
-    /* update check information */
-    if (s->checkfn != Z_NULL)
-      s->check = (*s->checkfn)(s->check, q, n);
-
-    /* copy */
-    if (p != NULL) {
-      zmemcpy(p, q, n);
-      p += n;
-    }
-    q += n;
-  }
-
-  /* update pointers */
-  z->next_out = p;
-  s->read = q;
-
-  /* done */
-  return r;
-}
-
-
-/*+++++*/
-/* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* macros for bit input with no checking and for returning unused bytes */
-#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
-
-/* Called with number of bytes left to write in window at least 258
-   (the maximum string length) and number of input bytes available
-   at least ten.  The ten bytes are six bytes for the longest length/
-   distance pair plus four bytes for overloading the bit buffer. */
-
-local int inflate_fast(bl, bd, tl, td, s, z)
-uInt bl, bd;
-inflate_huft *tl, *td;
-inflate_blocks_statef *s;
-z_stream *z;
-{
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  uInt ml;              /* mask for literal/length tree */
-  uInt md;              /* mask for distance tree */
-  uInt c;               /* bytes to copy */
-  uInt d;               /* distance back to copy from */
-  Bytef *r;             /* copy source pointer */
-
-  /* load input, output, bit values */
-  LOAD
-
-  /* initialize masks */
-  ml = inflate_mask[bl];
-  md = inflate_mask[bd];
-
-  /* do until not enough input or output space for fast loop */
-  do {                          /* assume called with m >= 258 && n >= 10 */
-    /* get literal/length code */
-    GRABBITS(20)                /* max bits for literal/length code */
-    if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
-    {
-      DUMPBITS(t->bits)
-      Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                "inflate:         * literal '%c'\n" :
-                "inflate:         * literal 0x%02x\n", t->base));
-      *q++ = (Byte)t->base;
-      m--;
-      continue;
-    }
-    do {
-      DUMPBITS(t->bits)
-      if (e & 16)
-      {
-        /* get extra bits for length */
-        e &= 15;
-        c = t->base + ((uInt)b & inflate_mask[e]);
-        DUMPBITS(e)
-        Tracevv((stderr, "inflate:         * length %u\n", c));
-
-        /* decode distance base of block to copy */
-        GRABBITS(15);           /* max bits for distance code */
-        e = (t = td + ((uInt)b & md))->exop;
-        do {
-          DUMPBITS(t->bits)
-          if (e & 16)
-          {
-            /* get extra bits to add to distance base */
-            e &= 15;
-            GRABBITS(e)         /* get extra bits (up to 13) */
-            d = t->base + ((uInt)b & inflate_mask[e]);
-            DUMPBITS(e)
-            Tracevv((stderr, "inflate:         * distance %u\n", d));
-
-            /* do the copy */
-            m -= c;
-            if ((uInt)(q - s->window) >= d)     /* offset before dest */
-            {                                   /*  just copy */
-              r = q - d;
-              *q++ = *r++;  c--;        /* minimum count is three, */
-              *q++ = *r++;  c--;        /*  so unroll loop a little */
-            }
-            else                        /* else offset after destination */
-            {
-              e = d - (q - s->window);  /* bytes from offset to end */
-              r = s->end - e;           /* pointer to offset */
-              if (c > e)                /* if source crosses, */
-              {
-                c -= e;                 /* copy to end of window */
-                do {
-                  *q++ = *r++;
-                } while (--e);
-                r = s->window;          /* copy rest from start of window */
-              }
-            }
-            do {                        /* copy all or what's left */
-              *q++ = *r++;
-            } while (--c);
-            break;
-          }
-          else if ((e & 64) == 0)
-            e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
-          else
-          {
-            z->msg = "invalid distance code";
-            UNGRAB
-            UPDATE
-            return Z_DATA_ERROR;
-          }
-        } while (1);
-        break;
-      }
-      if ((e & 64) == 0)
-      {
-        if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
-        {
-          DUMPBITS(t->bits)
-          Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                    "inflate:         * literal '%c'\n" :
-                    "inflate:         * literal 0x%02x\n", t->base));
-          *q++ = (Byte)t->base;
-          m--;
-          break;
-        }
-      }
-      else if (e & 32)
-      {
-        Tracevv((stderr, "inflate:         * end of block\n"));
-        UNGRAB
-        UPDATE
-        return Z_STREAM_END;
-      }
-      else
-      {
-        z->msg = "invalid literal/length code";
-        UNGRAB
-        UPDATE
-        return Z_DATA_ERROR;
-      }
-    } while (1);
-  } while (m >= 258 && n >= 10);
-
-  /* not enough input or output--restore pointers and return */
-  UNGRAB
-  UPDATE
-  return Z_OK;
-}
-
-
-/*+++++*/
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: zutil.c,v 1.8 1995/05/03 17:27:12 jloup Exp */
-
-char *zlib_version = ZLIB_VERSION;
-
-char *z_errmsg[] = {
-"stream end",          /* Z_STREAM_END    1 */
-"",                    /* Z_OK            0 */
-"file error",          /* Z_ERRNO        (-1) */
-"stream error",        /* Z_STREAM_ERROR (-2) */
-"data error",          /* Z_DATA_ERROR   (-3) */
-"insufficient memory", /* Z_MEM_ERROR    (-4) */
-"buffer error",        /* Z_BUF_ERROR    (-5) */
-""};
-
-
-/*+++++*/
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: adler32.c,v 1.6 1995/05/03 17:27:08 jloup Exp */
-
-#define BASE 65521L /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf)  {s1 += *buf++; s2 += s1;}
-#define DO2(buf)  DO1(buf); DO1(buf);
-#define DO4(buf)  DO2(buf); DO2(buf);
-#define DO8(buf)  DO4(buf); DO4(buf);
-#define DO16(buf) DO8(buf); DO8(buf);
-
-/* ========================================================================= */
-uLong adler32(adler, buf, len)
-    uLong adler;
-    Bytef *buf;
-    uInt len;
-{
-    unsigned long s1 = adler & 0xffff;
-    unsigned long s2 = (adler >> 16) & 0xffff;
-    int k;
-
-    if (buf == Z_NULL) return 1L;
-
-    while (len > 0) {
-        k = len < NMAX ? len : NMAX;
-        len -= k;
-        while (k >= 16) {
-            DO16(buf);
-            k -= 16;
-        }
-        if (k != 0) do {
-            DO1(buf);
-        } while (--k);
-        s1 %= BASE;
-        s2 %= BASE;
-    }
-    return (s2 << 16) | s1;
-}
diff --git a/mdk-stage1/ppp/pppdump/zlib.h b/mdk-stage1/ppp/pppdump/zlib.h
deleted file mode 100644
index 9c7ac734d..000000000
--- a/mdk-stage1/ppp/pppdump/zlib.h
+++ /dev/null
@@ -1,631 +0,0 @@
-/*	$Id$	*/
-
-/*
- * This file is derived from zlib.h and zconf.h from the zlib-0.95
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.
- */
-
-/* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 0.95, Aug 16th, 1995.
-
-  Copyright (C) 1995 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
- */
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-/* #include "zconf.h" */	/* included directly here */
-
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */
-
-/*
-     The library does not install any signal handler. It is recommended to
-  add at least a handler for SIGSEGV when decompressing; the library checks
-  the consistency of the input data whenever possible but may go nuts
-  for some forms of corrupted input.
- */
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints
- * at addresses which are not a multiple of their size.
- * Under DOS, -DFAR=far or -DFAR=__far may be needed.
- */
-
-#ifndef STDC
-#  if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus)
-#    define STDC
-#  endif
-#endif
-
-#ifdef	__MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
-#  include <unix.h>
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-#  ifdef MAXSEG_64K
-#    define MAX_MEM_LEVEL 8
-#  else
-#    define MAX_MEM_LEVEL 9
-#  endif
-#endif
-
-#ifndef FAR
-#  define FAR
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
-#ifndef MAX_WBITS
-#  define MAX_WBITS   15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
-            1 << (windowBits+2)   +  1 << (memLevel+9)
- that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
-     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
-   The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
-                        /* Type declarations */
-
-#ifndef OF /* function prototypes */
-#  ifdef STDC
-#    define OF(args)  args
-#  else
-#    define OF(args)  ()
-#  endif
-#endif
-
-typedef unsigned char  Byte;  /* 8 bits */
-typedef unsigned int   uInt;  /* 16 bits or more */
-typedef unsigned long  uLong; /* 32 bits or more */
-
-typedef Byte FAR Bytef;
-typedef char FAR charf;
-typedef int FAR intf;
-typedef uInt FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
-   typedef void FAR *voidpf;
-   typedef void     *voidp;
-#else
-   typedef Byte FAR *voidpf;
-   typedef Byte     *voidp;
-#endif
-
-/* end of original zconf.h */
-
-#define ZLIB_VERSION "0.95P"
-
-/* 
-     The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed
-  data.  This version of the library supports only one compression method
-  (deflation) but other algorithms may be added later and will have the same
-  stream interface.
-
-     For compression the application must provide the output buffer and
-  may optionally provide the input buffer for optimization. For decompression,
-  the application must provide the input buffer and may optionally provide
-  the output buffer for optimization.
-
-     Compression can be done in a single step if the buffers are large
-  enough (for example if an input file is mmap'ed), or can be done by
-  repeated calls of the compression function.  In the latter case, the
-  application must provide more input and/or consume the output
-  (providing more output space) before each call.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void   (*free_func)  OF((voidpf opaque, voidpf address, uInt nbytes));
-
-struct internal_state;
-
-typedef struct z_stream_s {
-    Bytef    *next_in;  /* next input byte */
-    uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
-
-    Bytef    *next_out; /* next output byte should be put there */
-    uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
-
-    char     *msg;      /* last error message, NULL if no error */
-    struct internal_state FAR *state; /* not visible by applications */
-
-    alloc_func zalloc;  /* used to allocate the internal state */
-    free_func  zfree;   /* used to free the internal state */
-    voidp      opaque;  /* private data object passed to zalloc and zfree */
-
-    Byte     data_type; /* best guess about the data type: ascii or binary */
-
-} z_stream;
-
-/*
-   The application must update next_in and avail_in when avail_in has
-   dropped to zero. It must update next_out and avail_out when avail_out
-   has dropped to zero. The application must initialize zalloc, zfree and
-   opaque before calling the init function. All other fields are set by the
-   compression library and must not be updated by the application.
-
-   The opaque value provided by the application will be passed as the first
-   parameter for calls of zalloc and zfree. This can be useful for custom
-   memory management. The compression library attaches no meaning to the
-   opaque value.
-
-   zalloc must return Z_NULL if there is not enough memory for the object.
-   On 16-bit systems, the functions zalloc and zfree must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this
-   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
-   pointers returned by zalloc for objects of exactly 65536 bytes *must*
-   have their offset normalized to zero. The default allocation function
-   provided by this library ensures this (see zutil.c). To reduce memory
-   requirements and avoid any allocation of 64K objects, at the expense of
-   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
-   The fields total_in and total_out can be used for statistics or
-   progress reports. After compression, total_in holds the total size of
-   the uncompressed data and may be saved for use in the decompressor
-   (particularly if the decompressor wants to decompress everything in
-   a single step).
-*/
-
-                        /* constants */
-
-#define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1
-#define Z_FULL_FLUSH    2
-#define Z_SYNC_FLUSH    3 /* experimental: partial_flush + byte align */
-#define Z_FINISH        4
-#define Z_PACKET_FLUSH	5
-/* See deflate() below for the usage of these constants */
-
-#define Z_OK            0
-#define Z_STREAM_END    1
-#define Z_ERRNO        (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR   (-3)
-#define Z_MEM_ERROR    (-4)
-#define Z_BUF_ERROR    (-5)
-/* error codes for the compression/decompression functions */
-
-#define Z_BEST_SPEED             1
-#define Z_BEST_COMPRESSION       9
-#define Z_DEFAULT_COMPRESSION  (-1)
-/* compression levels */
-
-#define Z_FILTERED            1
-#define Z_HUFFMAN_ONLY        2
-#define Z_DEFAULT_STRATEGY    0
-
-#define Z_BINARY   0
-#define Z_ASCII    1
-#define Z_UNKNOWN  2
-/* Used to set the data_type field */
-
-#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
-
-extern char *zlib_version;
-/* The application can compare zlib_version and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is
-   not compatible with the zlib.h header file used by the application.
- */
-
-                        /* basic functions */
-
-extern int deflateInit OF((z_stream *strm, int level));
-/* 
-     Initializes the internal stream state for compression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.
-   If zalloc and zfree are set to Z_NULL, deflateInit updates them to
-   use default allocation functions.
-
-     The compression level must be Z_DEFAULT_COMPRESSION, or between 1 and 9:
-   1 gives best speed, 9 gives best compression. Z_DEFAULT_COMPRESSION requests
-   a default compromise between speed and compression (currently equivalent
-   to level 6).
-
-     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if level is not a valid compression level.
-   msg is set to null if there is no error message.  deflateInit does not
-   perform any compression: this will be done by deflate().
-*/
-
-
-extern int deflate OF((z_stream *strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Compress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in and avail_in are updated and
-    processing will resume at this point for the next call of deflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly. This action is forced if the parameter flush is non zero.
-    Forcing flush frequently degrades the compression ratio, so this parameter
-    should be set only when necessary (in interactive applications).
-    Some output may be provided even if flush is not set.
-
-  Before the call of deflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating avail_in or avail_out accordingly; avail_out
-  should never be zero before the call. The application can consume the
-  compressed output when it wants, for example when the output buffer is full
-  (avail_out == 0), or after each call of deflate().
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression
-  block is terminated and flushed to the output buffer so that the
-  decompressor can get all input data available so far. For method 9, a future
-  variant on method 8, the current block will be flushed but not terminated.
-  If flush is set to Z_FULL_FLUSH, the compression block is terminated, a
-  special marker is output and the compression dictionary is discarded; this
-  is useful to allow the decompressor to synchronize if one compressed block
-  has been damaged (see inflateSync below).  Flushing degrades compression and
-  so should be used only when necessary.  Using Z_FULL_FLUSH too often can
-  seriously degrade the compression. If deflate returns with avail_out == 0,
-  this function must be called again with the same value of the flush
-  parameter and more output space (updated avail_out), until the flush is
-  complete (deflate returns with non-zero avail_out).
-
-    If the parameter flush is set to Z_PACKET_FLUSH, the compression
-  block is terminated, and a zero-length stored block is output,
-  omitting the length bytes (the effect of this is that the 3-bit type
-  code 000 for a stored block is output, and the output is then
-  byte-aligned).  This is designed for use at the end of a PPP packet.
-  In addition, if the current compression block contains all the data
-  since the last Z_PACKET_FLUSH, it is never output as a stored block.
-  If the current compression block output as a static or dynamic block
-  would not be at least `minCompression' bytes smaller than the
-  original data, then nothing is output for that block.  (The type
-  code for the zero-length stored block is still output, resulting in
-  a single zero byte being output for the whole packet.)
-  `MinCompression' is a parameter to deflateInit2, or 0 if deflateInit
-  is used.
-
-    If the parameter flush is set to Z_FINISH, all pending input is processed,
-  all pending output is flushed and deflate returns with Z_STREAM_END if there
-  was enough output space; if deflate returns with Z_OK, this function must be
-  called again with Z_FINISH and more output space (updated avail_out) but no
-  more input data, until it returns with Z_STREAM_END or an error. After
-  deflate has returned Z_STREAM_END, the only possible operations on the
-  stream are deflateReset or deflateEnd.
-  
-    Z_FINISH can be used immediately after deflateInit if all the compression
-  is to be done in a single step. In this case, avail_out must be at least
-  0.1% larger than avail_in plus 12 bytes.  If deflate does not return
-  Z_STREAM_END, then it must be called again as described above.
-
-    deflate() may update data_type if it can make a good guess about
-  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
-  binary. This field is only for information purposes and does not affect
-  the compression algorithm in any manner.
-
-    deflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if all input has been
-  consumed and all output has been produced (only when flush is set to
-  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible.
-*/
-
-
-extern int deflateEnd OF((z_stream *strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
-   stream state was inconsistent. In the error case, msg may be set
-   but then points to a static string (which must not be deallocated).
-*/
-
-
-extern int inflateInit OF((z_stream *strm));
-/* 
-     Initializes the internal stream state for decompression. The fields
-   zalloc and zfree must be initialized before by the caller.  If zalloc and
-   zfree are set to Z_NULL, inflateInit updates them to use default allocation
-   functions.
-
-     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory.  msg is set to null if there is no error message.
-   inflateInit does not perform any decompression: this will be done by
-   inflate().
-*/
-
-
-extern int inflate OF((z_stream *strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Decompress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing
-    will resume at this point for the next call of inflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() always provides as much output as possible
-    (until there is no more input data or no more space in the output buffer).
-
-  Before the call of inflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating the next_* and avail_* values accordingly.
-  The application can consume the uncompressed output when it wants, for
-  example when the output buffer is full (avail_out == 0), or after each
-  call of inflate().
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
-  inflate flushes as much output as possible to the output buffer. The
-  flushing behavior of inflate is not specified for values of the flush
-  parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
-  current implementation actually flushes as much output as possible
-  anyway.  For Z_PACKET_FLUSH, inflate checks that once all the input data
-  has been consumed, it is expecting to see the length field of a stored
-  block; if not, it returns Z_DATA_ERROR.
-
-    inflate() should normally be called until it returns Z_STREAM_END or an
-  error. However if all decompression is to be performed in a single step
-  (a single call of inflate), the parameter flush should be set to
-  Z_FINISH. In this case all pending input is processed and all pending
-  output is flushed; avail_out must be large enough to hold all the
-  uncompressed data. (The size of the uncompressed data may have been saved
-  by the compressor for this purpose.) The next operation on this stream must
-  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
-  is never required, but can be used to inform inflate that a faster routine
-  may be used for the single inflate() call.
-
-    inflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if the end of the
-  compressed data has been reached and all uncompressed output has been
-  produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if
-  the stream structure was inconsistent (for example if next_in or next_out
-  was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no
-  progress is possible or if there was not enough room in the output buffer
-  when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then
-  call inflateSync to look for a good compression block.  */
-
-
-extern int inflateEnd OF((z_stream *strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent. In the error case, msg may be set but then points to a
-   static string (which must not be deallocated).
-*/
-
-                        /* advanced functions */
-
-/*
-    The following functions are needed only in some special applications.
-*/
-
-extern int deflateInit2 OF((z_stream *strm,
-                            int  level,
-                            int  method,
-                            int  windowBits,
-                            int  memLevel,
-                            int  strategy,
-			    int  minCompression));
-/*   
-     This is another version of deflateInit with more compression options. The
-   fields next_in, zalloc and zfree must be initialized before by the caller.
-
-     The method parameter is the compression method. It must be 8 in this
-   version of the library. (Method 9 will allow a 64K history buffer and
-   partial block flushes.)
-
-     The windowBits parameter is the base two logarithm of the window size
-   (the size of the history buffer).  It should be in the range 8..15 for this
-   version of the library (the value 16 will be allowed for method 9). Larger
-   values of this parameter result in better compression at the expense of
-   memory usage. The default value is 15 if deflateInit is used instead.
-
-    The memLevel parameter specifies how much memory should be allocated
-   for the internal compression state. memLevel=1 uses minimum memory but
-   is slow and reduces compression ratio; memLevel=9 uses maximum memory
-   for optimal speed. The default value is 8. See zconf.h for total memory
-   usage as a function of windowBits and memLevel.
-
-     The strategy parameter is used to tune the compression algorithm. Use
-   the value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data
-   produced by a filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman
-   encoding only (no string match).  Filtered data consists mostly of small
-   values with a somewhat random distribution. In this case, the
-   compression algorithm is tuned to compress them better. The strategy
-   parameter only affects the compression ratio but not the correctness of
-   the compressed output even if it is not set appropriately.
-
-     The minCompression parameter specifies the minimum reduction in size
-   required for a compressed block to be output when Z_PACKET_FLUSH is
-   used (see the description of deflate above).
-
-     If next_in is not null, the library will use this buffer to hold also
-   some history information; the buffer must either hold the entire input
-   data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in
-   is null, the library will allocate its own history buffer (and leave next_in
-   null). next_out need not be provided here but must be provided by the
-   application for the next call of deflate().
-
-     If the history buffer is provided by the application, next_in must
-   must never be changed by the application since the compressor maintains
-   information inside this buffer from call to call; the application
-   must provide more input only by increasing avail_in. next_in is always
-   reset by the library in this case.
-
-      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   an invalid method). msg is set to null if there is no error message.
-   deflateInit2 does not perform any compression: this will be done by
-   deflate().
-*/
-                            
-extern int deflateCopy OF((z_stream *dest,
-                           z_stream *source));
-/*
-     Sets the destination stream as a complete copy of the source stream.  If
-   the source stream is using an application-supplied history buffer, a new
-   buffer is allocated for the destination stream.  The compressed output
-   buffer is always application-supplied. It's the responsibility of the
-   application to provide the correct values of next_out and avail_out for the
-   next call of deflate.
-
-     This function is useful when several compression strategies will be
-   tried, for example when there are several ways of pre-processing the input
-   data with a filter. The streams that will be discarded should then be freed
-   by calling deflateEnd.  Note that deflateCopy duplicates the internal
-   compression state which can be quite large, so this strategy is slow and
-   can consume lots of memory.
-
-      deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
-   (such as zalloc being NULL). msg is left unchanged in both source and
-   destination.
-*/
-
-extern int deflateReset OF((z_stream *strm));
-/*
-     This function is equivalent to deflateEnd followed by deflateInit,
-   but does not free and reallocate all the internal compression state.
-   The stream will keep the same compression level and any other attributes
-   that may have been set by deflateInit2.
-
-      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateInit2 OF((z_stream *strm,
-                            int  windowBits));
-/*   
-     This is another version of inflateInit with more compression options. The
-   fields next_out, zalloc and zfree must be initialized before by the caller.
-
-     The windowBits parameter is the base two logarithm of the maximum window
-   size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library (the value 16 will be allowed soon). The
-   default value is 15 if inflateInit is used instead. If a compressed stream
-   with a larger window size is given as input, inflate() will return with
-   the error code Z_DATA_ERROR instead of trying to allocate a larger window.
-
-     If next_out is not null, the library will use this buffer for the history
-   buffer; the buffer must either be large enough to hold the entire output
-   data, or have at least 1<<windowBits bytes.  If next_out is null, the
-   library will allocate its own buffer (and leave next_out null). next_in
-   need not be provided here but must be provided by the application for the
-   next call of inflate().
-
-     If the history buffer is provided by the application, next_out must
-   never be changed by the application since the decompressor maintains
-   history information inside this buffer from call to call; the application
-   can only reset next_out to the beginning of the history buffer when
-   avail_out is zero and all output has been consumed.
-
-      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   windowBits < 8). msg is set to null if there is no error message.
-   inflateInit2 does not perform any decompression: this will be done by
-   inflate().
-*/
-
-extern int inflateSync OF((z_stream *strm));
-/* 
-    Skips invalid compressed data until the special marker (see deflate()
-  above) can be found, or until all available input is skipped. No output
-  is provided.
-
-    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
-  if no more input was provided, Z_DATA_ERROR if no marker has been found,
-  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
-  case, the application may save the current current value of total_in which
-  indicates where valid compressed data was found. In the error case, the
-  application may repeatedly call inflateSync, providing more input each time,
-  until success or end of the input data.
-*/
-
-extern int inflateReset OF((z_stream *strm));
-/*
-     This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.
-   The stream will keep attributes that may have been set by inflateInit2.
-
-      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateIncomp OF((z_stream *strm));
-/*
-     This function adds the data at next_in (avail_in bytes) to the output
-   history without performing any output.  There must be no pending output,
-   and the decompressor must be expecting to see the start of a block.
-   Calling this function is equivalent to decompressing a stored block
-   containing the data at next_in (except that the data is not output).
-*/
-
-                        /* checksum functions */
-
-/*
-     This function is not related to compression but is exported
-   anyway because it might be useful in applications using the
-   compression library.
-*/
-
-extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len));
-
-/*
-     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum. If buf is NULL, this function returns
-   the required initial value for the checksum.
-   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
-   much faster. Usage example:
-
-     uLong adler = adler32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       adler = adler32(adler, buffer, length);
-     }
-     if (adler != original_adler) error();
-*/
-
-#ifndef _Z_UTIL_H
-    struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-#endif /* _ZLIB_H */
diff --git a/mdk-stage1/ppp/pppstats/Makefile.linux b/mdk-stage1/ppp/pppstats/Makefile.linux
deleted file mode 100644
index ef0764c5d..000000000
--- a/mdk-stage1/ppp/pppstats/Makefile.linux
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# pppstats makefile
-# $Id$
-#
-
-PPPSTATSRCS = pppstats.c
-PPPSTATOBJS = pppstats.o
-
-#CC = gcc
-COPTS = -O
-COMPILE_FLAGS = -D_linux_ -I../include
-LIBS =
-
-INSTALL= install -o root -g daemon
-
-CFLAGS = $(COPTS) $(COMPILE_FLAGS)
-
-all: pppstats
-
-install: pppstats
-	$(INSTALL) -s -c pppstats $(BINDIR)/pppstats
-	$(INSTALL) -c -m 444 pppstats.8 $(MANDIR)/man8/pppstats.8
-
-pppstats: $(PPPSTATSRCS)
-	$(CC) $(CFLAGS) -o pppstats pppstats.c $(LIBS)
-
-clean:
-	rm -f pppstats *~ #* core
-
-depend:
-	cpp -M $(CFLAGS) $(PPPSTATSRCS) >.depend
-#	makedepend $(CFLAGS) $(PPPSTATSRCS)
diff --git a/mdk-stage1/ppp/pppstats/Makefile.sol2 b/mdk-stage1/ppp/pppstats/Makefile.sol2
deleted file mode 100644
index a6544e61b..000000000
--- a/mdk-stage1/ppp/pppstats/Makefile.sol2
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# pppstats Makefile for SVR4 systems
-# $Id$
-#
-
-include ../solaris/Makedefs
-
-CFLAGS = -DSTREAMS -I../include $(COPTS)
-
-all: pppstats
-
-pppstats: pppstats.c
-	$(CC) $(CFLAGS) -o pppstats pppstats.c
-
-install: pppstats
-	$(INSTALL) -f $(BINDIR) pppstats
-	$(INSTALL) -m 444 -f $(MANDIR)/man8 pppstats.8
-
-clean:
-	rm -f pppstats *~ core
diff --git a/mdk-stage1/ppp/pppstats/Makefile.sunos4 b/mdk-stage1/ppp/pppstats/Makefile.sunos4
deleted file mode 100644
index 2a036f28f..000000000
--- a/mdk-stage1/ppp/pppstats/Makefile.sunos4
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# pppstats makefile
-# $Id$
-#
-
-include ../sunos4/Makedefs
-
-PPPSTATSRCS = pppstats.c
-PPPSTATOBJS = pppstats.o
-
-COMPILE_FLAGS = -DSTREAMS -DSUNOS4
-LIBS =
-
-CFLAGS = -I../include $(COPTS) $(COMPILE_FLAGS)
-
-all: pppstats
-
-install: pppstats
-	$(INSTALL) -c pppstats $(BINDIR)/pppstats
-	$(INSTALL) -c -m 444 pppstats.8 $(MANDIR)/man8/pppstats.8
-
-pppstats: $(PPPSTATSRCS)
-	$(CC) $(CFLAGS) -o pppstats pppstats.c $(LIBS)
-
-clean:
-	rm -f pppstats *~ #* core
-
-depend:
-	cpp -M $(CFLAGS) $(PPPSTATSRCS) >.depend
-#	makedepend $(CFLAGS) $(PPPSTATSRCS)
diff --git a/mdk-stage1/ppp/pppstats/pppstats.8 b/mdk-stage1/ppp/pppstats/pppstats.8
deleted file mode 100644
index 1ba8d5779..000000000
--- a/mdk-stage1/ppp/pppstats/pppstats.8
+++ /dev/null
@@ -1,217 +0,0 @@
-.\"	@(#) $Id$
-.TH PPPSTATS 8 "26 June 1995"
-.SH NAME
-pppstats \- print PPP statistics
-.SH SYNOPSIS
-.B pppstats
-[
-.B -a
-] [
-.B -v
-] [
-.B -r
-] [
-.B -z
-] [
-.B -c
-.I <count>
-] [
-.B -w
-.I <secs>
-] [
-.I interface
-]
-.ti 12
-.SH DESCRIPTION
-The
-.B pppstats
-utility reports PPP-related statistics at regular intervals for the
-specified PPP interface.  If the interface is unspecified, it will
-default to ppp0.
-The display is split horizontally
-into input and output sections containing columns of statistics
-describing the properties and volume of packets received and
-transmitted by the interface.
-.PP
-The options are as follows:
-.TP
-.B -a
-Display absolute values rather than deltas.  With this option, all
-reports show statistics for the time since the link was initiated.
-Without this option, the second and subsequent reports show statistics
-for the time since the last report.
-.TP
-.B -c \fIcount
-Repeat the display
-.I count
-times.  If this option is not specified, the default repeat count is 1
-if the
-.B -w
-option is not specified, otherwise infinity.
-.TP
-.B -r
-Display additional statistics summarizing the compression ratio
-achieved by the packet compression algorithm in use.
-.TP
-.B -v
-Display additional statistics relating to the performance of the Van
-Jacobson TCP header compression algorithm.
-.TP
-.B -w \fIwait
-Pause
-.I wait
-seconds between each display.  If this option is not specified, the
-default interval is 5 seconds.
-.TP
-.B -z
-Instead of the standard display, show statistics indicating the
-performance of the packet compression algorithm in use.
-.PP
-The following fields are printed on the input side when the
-.B -z
-option is not used:
-.TP
-.B IN
-The total number of bytes received by this interface.
-.TP
-.B PACK
-The total number of packets received by this interface.
-.TP
-.B VJCOMP
-The number of header-compressed TCP packets received by this interface.
-.TP
-.B VJUNC
-The number of header-uncompressed TCP packets received by this
-interface.  Not reported when the
-.B -r
-option is specified.
-.TP
-.B VJERR
-The number of corrupted or bogus header-compressed TCP packets
-received by this interface.  Not reported when the
-.B -r
-option is specified.
-.TP
-.B VJTOSS
-The number of VJ header-compressed TCP packets dropped on reception by
-this interface because of preceding errors.  Only reported when the
-.B -v
-option is specified.
-.TP
-.B NON-VJ
-The total number of non-TCP packets received by this interface. Only
-reported when the
-.B -v
-option is specified.
-.TP
-.B RATIO
-The compression ratio achieved for received packets by the
-packet compression scheme in use, defined as the uncompressed size
-divided by the compressed size.
-Only reported when the
-.B -r
-option is specified.
-.TP
-.B UBYTE
-The total number of bytes received, after decompression of compressed
-packets.  Only reported when the
-.B -r
-option is specified.
-.PP
-The following fields are printed on the output side:
-.TP
-.B OUT
-The total number of bytes transmitted from this interface.
-.TP
-.B PACK
-The total number of packets transmitted from this interface.
-.TP
-.B VJCOMP
-The number of TCP packets transmitted from this interface with
-VJ-compressed TCP headers.
-.TP
-.B VJUNC
-The number of TCP packets transmitted from this interface with
-VJ-uncompressed TCP headers.
-Not reported when the
-.B -r
-option is specified.
-.TP
-.B NON-VJ
-The total number of non-TCP packets transmitted from this interface.
-Not reported when the
-.B -r
-option is specified.
-.TP
-.B VJSRCH
-The number of searches for the cached header entry for a VJ header
-compressed TCP packet.  Only reported when the
-.B -v
-option is specified.
-.TP
-.B VJMISS
-The number of failed searches for the cached header entry for a
-VJ header compressed TCP packet.  Only reported when the
-.B -v
-option is specified.
-.TP
-.B RATIO
-The compression ratio achieved for transmitted packets by the
-packet compression scheme in use, defined as the size
-before compression divided by the compressed size.
-Only reported when the
-.B -r
-option is specified.
-.TP
-.B UBYTE
-The total number of bytes to be transmitted, before packet compression
-is applied.  Only reported when the
-.B -r
-option is specified.
-.PP
-When the
-.B -z
-option is specified,
-.Nm pppstats
-instead displays the following fields, relating to the packet
-compression algorithm currently in use.  If packet compression is not
-in use, these fields will all display zeroes.  The fields displayed on
-the input side are:
-.TP
-.B COMPRESSED BYTE
-The number of bytes of compressed packets received.
-.TP
-.B COMPRESSED PACK
-The number of compressed packets received.
-.TP
-.B INCOMPRESSIBLE BYTE
-The number of bytes of incompressible packets (that is, those which
-were transmitted in uncompressed form) received.
-.TP
-.B INCOMPRESSIBLE PACK
-The number of incompressible packets received.
-.TP
-.B COMP RATIO
-The recent compression ratio for incoming packets, defined as the
-uncompressed size divided by the compressed size (including both
-compressible and incompressible packets).
-.PP
-The fields displayed on the output side are:
-.TP
-.B COMPRESSED BYTE
-The number of bytes of compressed packets transmitted.
-.TP
-.B COMPRESSED PACK
-The number of compressed packets transmitted.
-.TP
-.B INCOMPRESSIBLE BYTE
-The number of bytes of incompressible packets transmitted (that is,
-those which were transmitted in uncompressed form).
-.TP
-.B INCOMPRESSIBLE PACK
-The number of incompressible packets transmitted.
-.TP
-.B COMP RATIO
-The recent compression ratio for outgoing packets.
-.SH SEE ALSO
-pppd(8)
diff --git a/mdk-stage1/ppp/pppstats/pppstats.c b/mdk-stage1/ppp/pppstats/pppstats.c
deleted file mode 100644
index 77b803723..000000000
--- a/mdk-stage1/ppp/pppstats/pppstats.c
+++ /dev/null
@@ -1,557 +0,0 @@
-/*
- * print PPP statistics:
- * 	pppstats [-a|-d] [-v|-r|-z] [-c count] [-w wait] [interface]
- *
- *   -a Show absolute values rather than deltas
- *   -d Show data rate (kB/s) rather than bytes
- *   -v Show more stats for VJ TCP header compression
- *   -r Show compression ratio
- *   -z Show compression statistics instead of default display
- *
- * History:
- *      perkins@cps.msu.edu: Added compression statistics and alternate 
- *                display. 11/94
- *	Brad Parker (brad@cayman.com) 6/92
- *
- * from the original "slstats" by Van Jacobson
- *
- * Copyright (c) 1989 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __STDC__
-#define const
-#endif
-
-#ifndef lint
-static const char rcsid[] = "$Id$";
-#endif
-
-#include <stdio.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/ioctl.h>
-
-#ifndef STREAMS
-#if defined(_linux_) && defined(__powerpc__) \
-    && (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
-/* kludge alert! */
-#undef __GLIBC__
-#endif
-#include <sys/socket.h>		/* *BSD, Linux, NeXT, Ultrix etc. */
-#ifndef _linux_
-#include <net/if.h>
-#include <net/ppp_defs.h>
-#include <net/if_ppp.h>
-#else
-/* Linux */
-#if __GLIBC__ >= 2
-#include <asm/types.h>		/* glibc 2 conflicts with linux/types.h */
-#include <net/if.h>
-#else
-#include <linux/types.h>
-#include <linux/if.h>
-#endif
-#include <linux/ppp_defs.h>
-#include <linux/if_ppp.h>
-#endif /* _linux_ */
-
-#else	/* STREAMS */
-#include <sys/stropts.h>	/* SVR4, Solaris 2, SunOS 4, OSF/1, etc. */
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-
-#endif	/* STREAMS */
-
-int	vflag, rflag, zflag;	/* select type of display */
-int	aflag;			/* print absolute values, not deltas */
-int	dflag;			/* print data rates, not bytes */
-int	interval, count;
-int	infinite;
-int	unit;
-int	s;			/* socket or /dev/ppp file descriptor */
-int	signalled;		/* set if alarm goes off "early" */
-char	*progname;
-char	*interface;
-
-#if defined(SUNOS4) || defined(ULTRIX) || defined(NeXT)
-extern int optind;
-extern char *optarg;
-#endif
-
-/*
- * If PPP_DRV_NAME is not defined, use the legacy "ppp" as the
- * device name.
- */
-#if !defined(PPP_DRV_NAME)
-#define PPP_DRV_NAME    "ppp"
-#endif /* !defined(PPP_DRV_NAME) */
-
-static void usage __P((void));
-static void catchalarm __P((int));
-static void get_ppp_stats __P((struct ppp_stats *));
-static void get_ppp_cstats __P((struct ppp_comp_stats *));
-static void intpr __P((void));
-
-int main __P((int, char *argv[]));
-
-static void
-usage()
-{
-    fprintf(stderr, "Usage: %s [-a|-d] [-v|-r|-z] [-c count] [-w wait] [interface]\n",
-	    progname);
-    exit(1);
-}
-
-/*
- * Called if an interval expires before intpr has completed a loop.
- * Sets a flag to not wait for the alarm.
- */
-static void
-catchalarm(arg)
-    int arg;
-{
-    signalled = 1;
-}
-
-
-#ifndef STREAMS
-static void
-get_ppp_stats(curp)
-    struct ppp_stats *curp;
-{
-    struct ifpppstatsreq req;
-
-    memset (&req, 0, sizeof (req));
-
-#ifdef _linux_
-    req.stats_ptr = (caddr_t) &req.stats;
-#undef ifr_name
-#define ifr_name ifr__name
-#endif
-
-    strncpy(req.ifr_name, interface, sizeof(req.ifr_name));
-    if (ioctl(s, SIOCGPPPSTATS, &req) < 0) {
-	fprintf(stderr, "%s: ", progname);
-	if (errno == ENOTTY)
-	    fprintf(stderr, "kernel support missing\n");
-	else
-	    perror("couldn't get PPP statistics");
-	exit(1);
-    }
-    *curp = req.stats;
-}
-
-static void
-get_ppp_cstats(csp)
-    struct ppp_comp_stats *csp;
-{
-    struct ifpppcstatsreq creq;
-
-    memset (&creq, 0, sizeof (creq));
-
-#ifdef _linux_
-    creq.stats_ptr = (caddr_t) &creq.stats;
-#undef  ifr_name
-#define ifr_name ifr__name
-#endif
-
-    strncpy(creq.ifr_name, interface, sizeof(creq.ifr_name));
-    if (ioctl(s, SIOCGPPPCSTATS, &creq) < 0) {
-	fprintf(stderr, "%s: ", progname);
-	if (errno == ENOTTY) {
-	    fprintf(stderr, "no kernel compression support\n");
-	    if (zflag)
-		exit(1);
-	    rflag = 0;
-	} else {
-	    perror("couldn't get PPP compression stats");
-	    exit(1);
-	}
-    }
-
-#ifdef _linux_
-    if (creq.stats.c.bytes_out == 0) {
-	creq.stats.c.bytes_out = creq.stats.c.comp_bytes + creq.stats.c.inc_bytes;
-	creq.stats.c.in_count = creq.stats.c.unc_bytes;
-    }
-    if (creq.stats.c.bytes_out == 0)
-	creq.stats.c.ratio = 0.0;
-    else
-	creq.stats.c.ratio = 256.0 * creq.stats.c.in_count /
-			     creq.stats.c.bytes_out;
-
-    if (creq.stats.d.bytes_out == 0) {
-	creq.stats.d.bytes_out = creq.stats.d.comp_bytes + creq.stats.d.inc_bytes;
-	creq.stats.d.in_count = creq.stats.d.unc_bytes;
-    }
-    if (creq.stats.d.bytes_out == 0)
-	creq.stats.d.ratio = 0.0;
-    else
-	creq.stats.d.ratio = 256.0 * creq.stats.d.in_count /
-			     creq.stats.d.bytes_out;
-#endif
-
-    *csp = creq.stats;
-}
-
-#else	/* STREAMS */
-
-int
-strioctl(fd, cmd, ptr, ilen, olen)
-    int fd, cmd, ilen, olen;
-    char *ptr;
-{
-    struct strioctl str;
-
-    str.ic_cmd = cmd;
-    str.ic_timout = 0;
-    str.ic_len = ilen;
-    str.ic_dp = ptr;
-    if (ioctl(fd, I_STR, &str) == -1)
-	return -1;
-    if (str.ic_len != olen)
-	fprintf(stderr, "strioctl: expected %d bytes, got %d for cmd %x\n",
-	       olen, str.ic_len, cmd);
-    return 0;
-}
-
-static void
-get_ppp_stats(curp)
-    struct ppp_stats *curp;
-{
-    if (strioctl(s, PPPIO_GETSTAT, curp, 0, sizeof(*curp)) < 0) {
-	fprintf(stderr, "%s: ", progname);
-	if (errno == EINVAL)
-	    fprintf(stderr, "kernel support missing\n");
-	else
-	    perror("couldn't get PPP statistics");
-	exit(1);
-    }
-}
-
-static void
-get_ppp_cstats(csp)
-    struct ppp_comp_stats *csp;
-{
-    if (strioctl(s, PPPIO_GETCSTAT, csp, 0, sizeof(*csp)) < 0) {
-	fprintf(stderr, "%s: ", progname);
-	if (errno == ENOTTY) {
-	    fprintf(stderr, "no kernel compression support\n");
-	    if (zflag)
-		exit(1);
-	    rflag = 0;
-	} else {
-	    perror("couldn't get PPP compression statistics");
-	    exit(1);
-	}
-    }
-}
-
-#endif /* STREAMS */
-
-#define MAX0(a)		((int)(a) > 0? (a): 0)
-#define V(offset)	MAX0(cur.offset - old.offset)
-#define W(offset)	MAX0(ccs.offset - ocs.offset)
-
-#define RATIO(c, i, u)	((c) == 0? 1.0: (u) / ((double)(c) + (i)))
-#define CRATE(x)	RATIO(W(x.comp_bytes), W(x.inc_bytes), W(x.unc_bytes))
-
-#define KBPS(n)		((n) / (interval * 1000.0))
-
-/*
- * Print a running summary of interface statistics.
- * Repeat display every interval seconds, showing statistics
- * collected over that interval.  Assumes that interval is non-zero.
- * First line printed is cumulative.
- */
-static void
-intpr()
-{
-    register int line = 0;
-    sigset_t oldmask, mask;
-    char *bunit;
-    int ratef = 0;
-    struct ppp_stats cur, old;
-    struct ppp_comp_stats ccs, ocs;
-
-    memset(&old, 0, sizeof(old));
-    memset(&ocs, 0, sizeof(ocs));
-
-    while (1) {
-	get_ppp_stats(&cur);
-	if (zflag || rflag)
-	    get_ppp_cstats(&ccs);
-
-	(void)signal(SIGALRM, catchalarm);
-	signalled = 0;
-	(void)alarm(interval);
-
-	if ((line % 20) == 0) {
-	    if (zflag) {
-		printf("IN:  COMPRESSED  INCOMPRESSIBLE   COMP | ");
-		printf("OUT: COMPRESSED  INCOMPRESSIBLE   COMP\n");
-		bunit = dflag? "KB/S": "BYTE";
-		printf("    %s   PACK     %s   PACK  RATIO | ", bunit, bunit);
-		printf("    %s   PACK     %s   PACK  RATIO", bunit, bunit);
-	    } else {
-		printf("%8.8s %6.6s %6.6s",
-		       "IN", "PACK", "VJCOMP");
-
-		if (!rflag)
-		    printf(" %6.6s %6.6s", "VJUNC", "VJERR");
-		if (vflag)
-		    printf(" %6.6s %6.6s", "VJTOSS", "NON-VJ");
-		if (rflag)
-		    printf(" %6.6s %6.6s", "RATIO", "UBYTE");
-		printf("  | %8.8s %6.6s %6.6s",
-		       "OUT", "PACK", "VJCOMP");
-
-		if (!rflag)
-		    printf(" %6.6s %6.6s", "VJUNC", "NON-VJ");
-		if (vflag)
-		    printf(" %6.6s %6.6s", "VJSRCH", "VJMISS");
-		if (rflag)
-		    printf(" %6.6s %6.6s", "RATIO", "UBYTE");
-	    }
-	    putchar('\n');
-	}
-
-	if (zflag) {
-	    if (ratef) {
-		printf("%8.3f %6u %8.3f %6u %6.2f",
-		       KBPS(W(d.comp_bytes)),
-		       W(d.comp_packets),
-		       KBPS(W(d.inc_bytes)),
-		       W(d.inc_packets),
-		       ccs.d.ratio / 256.0);
-		printf(" | %8.3f %6u %8.3f %6u %6.2f",
-		       KBPS(W(c.comp_bytes)),
-		       W(c.comp_packets),
-		       KBPS(W(c.inc_bytes)),
-		       W(c.inc_packets),
-		       ccs.c.ratio / 256.0);
-	    } else {
-		printf("%8u %6u %8u %6u %6.2f",
-		       W(d.comp_bytes),
-		       W(d.comp_packets),
-		       W(d.inc_bytes),
-		       W(d.inc_packets),
-		       ccs.d.ratio / 256.0);
-		printf(" | %8u %6u %8u %6u %6.2f",
-		       W(c.comp_bytes),
-		       W(c.comp_packets),
-		       W(c.inc_bytes),
-		       W(c.inc_packets),
-		       ccs.c.ratio / 256.0);
-	    }
-	
-	} else {
-	    if (ratef)
-		printf("%8.3f", KBPS(V(p.ppp_ibytes)));
-	    else
-		printf("%8u", V(p.ppp_ibytes));
-	    printf(" %6u %6u",
-		   V(p.ppp_ipackets),
-		   V(vj.vjs_compressedin));
-	    if (!rflag)
-		printf(" %6u %6u",
-		       V(vj.vjs_uncompressedin),
-		       V(vj.vjs_errorin));
-	    if (vflag)
-		printf(" %6u %6u",
-		       V(vj.vjs_tossed),
-		       V(p.ppp_ipackets) - V(vj.vjs_compressedin)
-		       - V(vj.vjs_uncompressedin) - V(vj.vjs_errorin));
-	    if (rflag) {
-		printf(" %6.2f ", CRATE(d));
-		if (ratef)
-		    printf("%6.2f", KBPS(W(d.unc_bytes)));
-		else
-		    printf("%6u", W(d.unc_bytes));
-	    }
-	    if (ratef)
-		printf("  | %8.3f", KBPS(V(p.ppp_obytes)));
-	    else
-		printf("  | %8u", V(p.ppp_obytes));
-	    printf(" %6u %6u",
-		   V(p.ppp_opackets),
-		   V(vj.vjs_compressed));
-	    if (!rflag)
-		printf(" %6u %6u",
-		       V(vj.vjs_packets) - V(vj.vjs_compressed),
-		       V(p.ppp_opackets) - V(vj.vjs_packets));
-	    if (vflag)
-		printf(" %6u %6u",
-		       V(vj.vjs_searches),
-		       V(vj.vjs_misses));
-	    if (rflag) {
-		printf(" %6.2f ", CRATE(c));
-		if (ratef)
-		    printf("%6.2f", KBPS(W(c.unc_bytes)));
-		else
-		    printf("%6u", W(c.unc_bytes));
-	    }
-
-	}
-
-	putchar('\n');
-	fflush(stdout);
-	line++;
-
-	count--;
-	if (!infinite && !count)
-	    break;
-
-	sigemptyset(&mask);
-	sigaddset(&mask, SIGALRM);
-	sigprocmask(SIG_BLOCK, &mask, &oldmask);
-	if (!signalled) {
-	    sigemptyset(&mask);
-	    sigsuspend(&mask);
-	}
-	sigprocmask(SIG_SETMASK, &oldmask, NULL);
-	signalled = 0;
-	(void)alarm(interval);
-
-	if (!aflag) {
-	    old = cur;
-	    ocs = ccs;
-	    ratef = dflag;
-	}
-    }
-}
-
-int
-main(argc, argv)
-    int argc;
-    char *argv[];
-{
-    int c;
-#ifdef STREAMS
-    char *dev;
-#endif
-
-    interface = PPP_DRV_NAME "0";
-    if ((progname = strrchr(argv[0], '/')) == NULL)
-	progname = argv[0];
-    else
-	++progname;
-
-    while ((c = getopt(argc, argv, "advrzc:w:")) != -1) {
-	switch (c) {
-	case 'a':
-	    ++aflag;
-	    break;
-	case 'd':
-	    ++dflag;
-	    break;
-	case 'v':
-	    ++vflag;
-	    break;
-	case 'r':
-	    ++rflag;
-	    break;
-	case 'z':
-	    ++zflag;
-	    break;
-	case 'c':
-	    count = atoi(optarg);
-	    if (count <= 0)
-		usage();
-	    break;
-	case 'w':
-	    interval = atoi(optarg);
-	    if (interval <= 0)
-		usage();
-	    break;
-	default:
-	    usage();
-	}
-    }
-    argc -= optind;
-    argv += optind;
-
-    if (!interval && count)
-	interval = 5;
-    if (interval && !count)
-	infinite = 1;
-    if (!interval && !count)
-	count = 1;
-    if (aflag)
-	dflag = 0;
-
-    if (argc > 1)
-	usage();
-    if (argc > 0)
-	interface = argv[0];
-
-    if (sscanf(interface, PPP_DRV_NAME "%d", &unit) != 1) {
-	fprintf(stderr, "%s: invalid interface '%s' specified\n",
-		progname, interface);
-    }
-
-#ifndef STREAMS
-    {
-	struct ifreq ifr;
-
-	s = socket(AF_INET, SOCK_DGRAM, 0);
-	if (s < 0) {
-	    fprintf(stderr, "%s: ", progname);
-	    perror("couldn't create IP socket");
-	    exit(1);
-	}
-
-#ifdef _linux_
-#undef  ifr_name
-#define ifr_name ifr_ifrn.ifrn_name
-#endif
-	strncpy(ifr.ifr_name, interface, sizeof(ifr.ifr_name));
-	if (ioctl(s, SIOCGIFFLAGS, (caddr_t)&ifr) < 0) {
-	    fprintf(stderr, "%s: nonexistent interface '%s' specified\n",
-		    progname, interface);
-	    exit(1);
-	}
-    }
-
-#else	/* STREAMS */
-#ifdef __osf__
-    dev = "/dev/streams/ppp";
-#else
-    dev = "/dev/" PPP_DRV_NAME;
-#endif
-    if ((s = open(dev, O_RDONLY)) < 0) {
-	fprintf(stderr, "%s: couldn't open ", progname);
-	perror(dev);
-	exit(1);
-    }
-    if (strioctl(s, PPPIO_ATTACH, &unit, sizeof(int), 0) < 0) {
-	fprintf(stderr, "%s: ppp%d is not available\n", progname, unit);
-	exit(1);
-    }
-
-#endif	/* STREAMS */
-
-    intpr();
-    exit(0);
-}
diff --git a/mdk-stage1/ppp/sample/auth-down b/mdk-stage1/ppp/sample/auth-down
deleted file mode 100644
index edde65db1..000000000
--- a/mdk-stage1/ppp/sample/auth-down
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-#
-# A program or script which is executed after the remote system
-# successfully authenticates itself. It is executed with the parameters
-# <interface-name> <peer-name> <user-name> <tty-device> <speed>
-#
-
-#
-# The environment is cleared before executing this script
-# so the path must be reset
-#
-PATH=/usr/sbin:/sbin:/usr/bin:/bin
-export PATH
-
-echo auth-down `date +'%y/%m/%d %T'` $* >> /var/log/pppstats
-
-# last line
diff --git a/mdk-stage1/ppp/sample/auth-up b/mdk-stage1/ppp/sample/auth-up
deleted file mode 100644
index 54722a3c0..000000000
--- a/mdk-stage1/ppp/sample/auth-up
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-#
-# A program or script which is executed after the remote system
-# successfully authenticates itself. It is executed with the parameters
-# <interface-name> <peer-name> <user-name> <tty-device> <speed>
-#
-
-#
-# The environment is cleared before executing this script
-# so the path must be reset
-#
-PATH=/usr/sbin:/sbin:/usr/bin:/bin
-export PATH
-
-echo auth-up `date +'%y/%m/%d %T'` $* >> /var/log/pppstats
-
-# last line
diff --git a/mdk-stage1/ppp/sample/ip-down b/mdk-stage1/ppp/sample/ip-down
deleted file mode 100644
index b771fb644..000000000
--- a/mdk-stage1/ppp/sample/ip-down
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh
-#
-# This script is run by the pppd _after_ the link is brought down.
-# It should be used to delete routes, unset IP addresses etc.
-#
-# This script is called with the following arguments:
-#    Arg  Name               Example
-#    $1   Interface name     ppp0
-#    $2   The tty            ttyS1
-#    $3   The link speed     38400
-#    $4   Local IP number    12.34.56.78
-#    $5   Peer  IP number    12.34.56.99
-#
-
-#
-# The  environment is cleared before executing this script
-# so the path must be reset
-#
-PATH=/usr/sbin:/sbin:/usr/bin:/bin
-export PATH
-
-# last line
diff --git a/mdk-stage1/ppp/sample/ip-up b/mdk-stage1/ppp/sample/ip-up
deleted file mode 100644
index 02bb71c44..000000000
--- a/mdk-stage1/ppp/sample/ip-up
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-# This script is run by the pppd after the link is established.
-# It should be used to add routes, set IP address, run the mailq 
-# etc.
-#
-# This script is called with the following arguments:
-#    Arg  Name               Example
-#    $1   Interface name     ppp0
-#    $2   The tty            ttyS1
-#    $3   The link speed     38400
-#    $4   Local IP number    12.34.56.78
-#    $5   Peer  IP number    12.34.56.99
-#
-
-#
-# The  environment is cleared before executing this script
-# so the path must be reset
-#
-PATH=/usr/sbin:/sbin:/usr/bin:/bin
-export PATH
-
-# last line
diff --git a/mdk-stage1/ppp/sample/options b/mdk-stage1/ppp/sample/options
deleted file mode 100644
index 8d0a3f963..000000000
--- a/mdk-stage1/ppp/sample/options
+++ /dev/null
@@ -1,153 +0,0 @@
-# /etc/ppp/options
-
-# The name of this server. Often, the FQDN is used here.
-#name <host>
-
-# Enforce the use of the hostname as the name of the local system for
-# authentication purposes (overrides the name option).
-usehostname
-
-# If no local IP address is given, pppd will use the first IP address
-# that belongs to the local hostname. If "noipdefault" is given, this
-# is disabled and the peer will have to supply an IP address.
-noipdefault
-
-# With this option, pppd will accept the peer's idea of our local IP
-# address, even if the local IP address was specified in an option.
-#ipcp-accept-local
-
-# With this option, pppd will accept the peer's idea of its (remote) IP
-# address, even if the remote IP address was specified in an option.
-#ipcp-accept-remote
-
-# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
-# Two Servers can be remotely configured
-#ms-dns 192.168.1.1
-#ms-dns 192.168.1.2
-
-# Specify which WINS Servers the incoming connection Win95 or WinNT should use
-#wins-addr 192.168.1.50
-#wins-addr 192.168.1.51
-
-# enable this on a server that already has a permanent default route
-#nodefaultroute
-
-# Run the executable or shell command specified after pppd has terminated
-# the link.  This script could, for example, issue commands to the modem
-# to cause it to hang up if hardware modem control signals were not
-# available.
-# If mgetty is running, it will reset the modem anyway. So there is no need
-# to do it here.
-#disconnect "chat -- \d+++\d\c OK ath0 OK"
-
-# Increase debugging level (same as -d). The debug output is written
-# to syslog LOG_LOCAL2.
-debug
-
-# Enable debugging code in the kernel-level PPP driver.  The argument n
-# is a number which is the sum of the following values: 1 to enable
-# general debug messages, 2 to request that the contents of received
-# packets be printed, and 4 to request that the contents of transmitted
-# packets be printed.
-#kdebug n
-
-# Require the peer to authenticate itself before allowing network
-# packets to be sent or received.
-# Please do not disable this setting. It is expected to be standard in
-# future releases of pppd. Use the call option (see manpage) to disable
-# authentication for specific peers.
-#auth
-
-# authentication can either be pap or chap. As most people only want to
-# use pap, you can also disable chap:
-#require-pap
-#refuse-chap
-
-# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
-# on the serial port.
-crtscts
-
-# Specifies that pppd should use a UUCP-style lock on the serial device
-# to ensure exclusive access to the device.
-lock
-
-# Use the modem control lines.
-modem
-
-# async character map -- 32-bit hex; each bit is a character
-# that needs to be escaped for pppd to receive it.  0x00000001
-# represents '\x01', and 0x80000000 represents '\x1f'.
-# To allow pppd to work over a rlogin/telnet connection, ou should escape
-# XON (^Q), XOFF  (^S) and ^]: (The peer should use "escape ff".)
-#asyncmap  200a0000
-asyncmap 0
-
-# Specifies that certain characters should be escaped on transmission
-# (regardless of whether the peer requests them to be escaped with its
-# async control character map).  The characters to be escaped are
-# specified as a list of hex numbers separated by commas.  Note that
-# almost any character can be specified for the escape option, unlike
-# the asyncmap option which only allows control characters to be
-# specified.  The characters which may not be escaped are those with hex
-# values 0x20 - 0x3f or 0x5e.
-#escape 11,13,ff
-
-# Set the MRU [Maximum Receive Unit] value to <n> for negotiation.  pppd
-# will ask the peer to send packets of no more than <n> bytes. The
-# minimum MRU value is 128.  The default MRU value is 1500.  A value of
-# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
-# bytes of data).
-#mru 542
-
-# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
-# requests a smaller value via MRU negotiation, pppd will request that
-# the kernel networking code send data packets of no more than n bytes
-# through the PPP network interface.
-#mtu <n>
-
-# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
-# notation (e.g. 255.255.255.0).
-#netmask 255.255.255.0
-
-# Don't fork to become a background process (otherwise pppd will do so
-# if a serial device is specified).
-nodetach
-
-# Set the assumed name of the remote system for authentication purposes
-# to <n>.
-#remotename <n>
-
-# Add an entry to this system's ARP [Address Resolution Protocol]
-# table with the IP address of the peer and the Ethernet address of this
-# system. {proxyarp,noproxyarp}
-proxyarp
-
-# Use the system password database for authenticating the peer using
-# PAP. Note: mgetty already provides this option. If this is specified
-# then dialin from users using a script under Linux to fire up ppp wont work.
-#login
-
-# If this option is given, pppd will send an LCP echo-request frame to
-# the peer every n seconds. Under Linux, the echo-request is sent when
-# no packets have been received from the peer for n seconds. Normally
-# the peer should respond to the echo-request by sending an echo-reply.
-# This option can be used with the lcp-echo-failure option to detect
-# that the peer is no longer connected.
-lcp-echo-interval 30
-
-# If this option is given, pppd will presume the peer to be dead if n
-# LCP echo-requests are sent without receiving a valid LCP echo-reply.
-# If this happens, pppd will terminate the connection.  Use of this
-# option requires a non-zero value for the lcp-echo-interval parameter.
-# This option can be used to enable pppd to terminate after the physical
-# connection has been broken (e.g., the modem has hung up) in
-# situations where no hardware modem control lines are available.
-lcp-echo-failure 4
-
-# Specifies that pppd should disconnect if the link is idle for n seconds.
-idle 600
-
-# Disable the IPXCP and IPX protocols.
-noipx
-
-# ---<End of File>---
diff --git a/mdk-stage1/ppp/sample/options.ttyXX b/mdk-stage1/ppp/sample/options.ttyXX
deleted file mode 100644
index d4202f534..000000000
--- a/mdk-stage1/ppp/sample/options.ttyXX
+++ /dev/null
@@ -1,14 +0,0 @@
-# If you need to set up multiple serial lines then copy this file to
-# options.<ttyname> for each tty with a modem on it.
-#
-# The options.tty file will assign an IP address to each PPP connection
-# as it comes up. They must all be distinct!
-#
-# Example:
-# options.ttyS1		for com2 under DOS.
-#
-# Edit the following line so that the first IP address
-# mentioned is the ip address of the serial port while the second
-# is the IP address of your host
-#
-hostname-s1:hostname
diff --git a/mdk-stage1/ppp/sample/pap-secrets b/mdk-stage1/ppp/sample/pap-secrets
deleted file mode 100644
index 098971b9f..000000000
--- a/mdk-stage1/ppp/sample/pap-secrets
+++ /dev/null
@@ -1,28 +0,0 @@
-# Secrets for authentication using PAP
-# client	server	secret			IP addresses
-
-# OUTBOUND CONNECTIONS
-# Here you should add your userid password to connect to your providers via
-# pap. The * means that the password is to be used for ANY host you connect
-# to. Thus you do not have to worry about the foreign machine name. Just
-# replace password with your password.
-# If you have different providers with different passwords then you better
-# remove the following line.
-#hostname	*	password
-
-# INBOUND CONNECTIONS
-#client		hostname	<password>	192.168.1.1
-
-# If you add "auth login -chap +pap" to /etc/mgetty+sendfax/login.config,
-# all users in /etc/passwd can use their password for pap-authentication.
-#
-# Every regular user can use PPP and has to use passwords from /etc/passwd
-#*	hostname	""
-# UserIDs that cannot use PPP at all. Check your /etc/passwd and add any
-# other accounts that should not be able to use pppd! Replace hostname
-# with your local hostname.
-#guest		hostname	"*"	-
-#master		hostname	"*"	-
-#root		hostname	"*"	-
-#support	hostname	"*"	-
-#stats		hostname	"*"	-
diff --git a/mdk-stage1/ppp/scripts/README b/mdk-stage1/ppp/scripts/README
deleted file mode 100644
index 00e032ca6..000000000
--- a/mdk-stage1/ppp/scripts/README
+++ /dev/null
@@ -1,143 +0,0 @@
-This directory contains a set of scripts which have been used on Linux
-as well as Solaris 2.x systems to initiate or maintain a connection 
-with PPP.  The files in this directory were contributed by Al Longyear 
-(longyear@netcom.com) and Adi Masputra (adi.masputra@sun.com)
-
-------------------------------------------------------------------------
-
-1. README
-
-This file. You are reading it. It is just documentation.
-
-------------------------------------------------------------------------
-
-2. ppp-on
-
-This script will initiate a connection to the PPP system. It will run
-the chat program with the connection script as a parameter. This is a
-possible security hole. However, it is simple. It is meant to replace
-the previous version of ppp-on which was not very functional.
-
-The ppp-on script has entries for the account name, password, IP
-addresses, and telephone numbers. The parameters are passed to the
-pppd process and, then in turn, to the second part of the connect
-script, as a set of environment variables.
-
-Please make sure that you put the full path name to the ppp-on-dialer
-script in the reference to it in ppp-on.
-
-------------------------------------------------------------------------
-
-3. ppp-on-dialer
-
-This is the second part to the simple calling script, ppp-on.  It
-executes the chat program to connect the user with a standard UNIX
-style getty/login connection sequence.
-
-------------------------------------------------------------------------
-
-4. callback
-
-This script may be used in lieu of the ppp-on-dialer to permit the
-common modem callback sequence. You may need to make changes to the
-expected prompt string for the modem.
-
-The script works by disabling the system's detection of the DCD
-condition and working on the modem status message "NO CARRIER" which
-is generated when the modem disconnects.
-
-It is crude. It does work for my modem connection. Use as you see fit.
-
-------------------------------------------------------------------------
-
-5. redialer
-
-The redialer script is a replacement for the ppp-on-dialer script.  It
-will do 'attack dialing' or 'demon dialing' of one or more telephone
-numbers. The first number which responds will be used for a
-connection.
-
-There is a limit of ten attempts and a 15 second delay between dialing
-attempts. Both values are set in the script.
-
-------------------------------------------------------------------------
-
-6. ppp-off
-
-This is a script which will terminate the active ppp connection. Use
-as either "ppp-off" to terminate ppp0, or "ppp-off <device>" to
-terminate the connection on <device>. For example, "ppp-off ppp2" will
-terminate the ppp2 connection.
-
-------------------------------------------------------------------------
-
-7. secure-card
-
-This script was written by Jim Isaacson <jcisaac@crl.com>. It is a script
-for the 'expect' programming language used with Tcl. You need to have
-expect and Tcl installed before this script may be used.
-
-This script will operate with a device marketed under the name "SecureCARD".
-This little device is mated with its controller. On the credit card size
-device, there is a sequence number which changes on a random basis. In order
-for you to connect you need to enter a fixed portion of your account name
-and the number which is displayed on this card device. The number must match
-the value at the controller in order for the account name to be used.
-
-The problem is that chat uses fixed response strings. In addition, the
-timing for running the script may prevent the use of a script that reads the
-value before it starts the dial sequence. What was needed was a script which
-asked the user at the user's console at the time that it is needed.
-
-This led to the use of expect.
-
-------------------------------------------------------------------------
-
-8. ppp-on-rsh
-
-This script will initiate a PPP connection to a remote machine using rsh.
-This is implemented by creating a master/slave pseudo-tty with the slave 
-pointing to rsh, specifically with the 'pty' and 'notty' options of pppd. 
-It is assumed that the remote machine contains some sort of trust 
-mechanisms (such as ~/.rhosts, et al) to allow the local machine to 
-connect via rsh as root.
-
-------------------------------------------------------------------------
-
-9. ppp-on-ssh
-
-This script will initiate a PPP connection to a remote machine using the 
-secure shell, or ssh. I've only tested this on ssh 1.x, so those of you 
-who are running ssh 2.x mahy need to modify the ssh options slightly.
-This is implemented by creating a master/slave pseudo-ttyt with the slave 
-pointing to ssh, specifically with the 'pty' and 'notty' options of pppd. 
-It is assumed that the remote machine can accept the ssh connection from 
-the local host, in the sense that all ssh authentication mechanisms have 
-been properly configured, so that a remote root user can open a ssh 
-connection.
-
-------------------------------------------------------------------------
-
-10. options-rsh-loc & options-rsh-rem
-
-These options files accompany the ppp-on-rsh script mentioned above. In 
-theory, you'd want to copy the options-rsh-rem to the remote machine where 
-in.rshd is running. The only extra option required on the remote machine 
-options file is the 'notty' option. In addition, all ASCII control characters 
-[0x00 to 0x1f], plus 0xff, are escaped. This may need to be modified 
-depending on the rsh (or pseudo-tty) implementation which may differ across 
-platforms, for further optimizations.
-
-------------------------------------------------------------------------
-
-11. options-ssh-loc & options-ssh-rem
-
-These options files accompany the ppp-on-ssh script mentioned above. I've
-only tested this on ssh 1.x, so those of you who are running ssh 2.x need
-to modify the ssh options slightly. In theory, you'd want to copy the 
-options-ssh-rem to the remote machine where sshd daemon is running. The only 
-extra options required on the remote machine options file is the 'notty' 
-option. In addition, all ASCII control characters [0x00 to 0x1f], plus 0xff, 
-are escaped. This may need to be modified depending on the ssh (or 
-pseudo-tty) implementation which may differ across platforms, for further 
-optimizations.
diff --git a/mdk-stage1/ppp/scripts/callback b/mdk-stage1/ppp/scripts/callback
deleted file mode 100755
index 3e74e10b2..000000000
--- a/mdk-stage1/ppp/scripts/callback
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/bin/sh
-###################################################################
-#
-# Script to dial the remote system, negotiate the connection, and send
-# it the id. Then wait for the modem to disconnect. Reset the modem
-# to answer mode and wait for the system to call back.
-#
-# The telephone number and modempass are used when establishing the
-# connection to the modem.
-#
-PHONE=555-1212
-MODEMPASS=modem_identifier
-#
-# Once the modem calls back, the account name and password are used for
-# a UNIX style login operation.
-#
-ACCOUNT=my_account_name
-PASSWORD=my_password
-
-###################################################################
-#
-# Step 1. Dial the modem and negotiate the initial dialog.
-#         note: the modem is configured to ignore loss of DCD at this point.
-#         it is important that this be performed because the loss of DCD
-#         will normally prevent system from working since 'modem' is used
-#         for pppd.
-#
-#         The script is terminated normally when the carrier is lost.
-#
-chat -v							\
-	TIMEOUT		3				\
-	ABORT		'\nBUSY\r'			\
-	ABORT		'\nNO ANSWER\r'			\
-	ABORT		'\nRINGING\r\n\r\nRINGING\r'	\
-	''		AT				\
-	'OK-+++\c-OK'	'AT&C0&D2S0=0H0			\
-	TIMEOUT		30				\
-	OK		ATDT$TELEPHONE			\
-	CONNECT		''				\
-	assword:	$MODEMPASS			\
-	"\nNO CARRIER\r"
-
-if [ "$?" = "0" ]; then
-
-###################################################################
-#
-# Step 2. Wait for the call back from the remote. This will wait for at most
-#         30 seconds for the call back should the first attempt fail or
-#         something happen with the callback logic at the remote.
-#
-#         note: when the callback occurs, the DCD setting is re-enabled.
-#
-# If some voice call should happen during this period, the system will
-# answer the telephone and then hang up on them. I realize that this is
-# rude, but there is little that this script can do.
-#
-  chat -v						\
-	TIMEOUT		30				\
-	ABORT		'\nVOICE\r'			\
-	'\nRING\r'	'AT&C1A'			\
-	CONNECT		''				\
-	TIMEOUT		10				\
-	ogin:--ogin:	$ACCOUNT			\
-	TIMEOUT		45				\
-	assword:	$PASSWORD
-
-  if [ "$?" = "0" ]; then
-    exit 0
-  fi
-fi
-
-###################################################################
-#
-# The script has failed. Terminate the connection mode.
-#
-chat -v TIMEOUT 3 "" AT 'OK-+++\c-OK' 'AT&C1&D2S0=0H0' OK
-exit 1
diff --git a/mdk-stage1/ppp/scripts/chat-callback b/mdk-stage1/ppp/scripts/chat-callback
deleted file mode 100644
index d014d6af3..000000000
--- a/mdk-stage1/ppp/scripts/chat-callback
+++ /dev/null
@@ -1,98 +0,0 @@
-# =====================================================================================
-# Chat script to dial our Company PPP account.
-# They uses a call-back system to identify us and to reverse
-# charge the call cost.
-# =====================================================================================
-#
-ECHO OFF
-# All the usual abort strings
-ABORT "NO CARRIER"
-ABORT "VOICE"
-ABORT "BUSY"
-ABORT "NO DIALTONE"
-ABORT "NO ANSWER"
-#
-# If calling outside allowed time we get this:
-#
-ABORT "Access denied"
-#
-# Modem initialisation stuff
-#
-TIMEOUT 5
-SAY "Initialising modem ...\n"
-'' ATE1
-'OK\r\n' ATS0=1S11=60X4&K4S42.1=1
-#
-# Now dial our ISP and wait for connection
-#
-SAY "Dialling our ISP ...\n"
-'OK\r\n' ATDT09834657
-TIMEOUT 60
-CONNECT \c
-SAY "Connected ...\n"
-#
-# This is the first stage login, we identify ourself so that the remote
-# system will agree to call us back.
-#
-TIMEOUT 30
-SAY "Sending Callback login ID ...\n"
-name:-BREAK-name: callme
-#
-# From now on, we must assume no carrier is normal as well
-# as receiving a HANGUP signal because it will be the
-# case if our ISP clears the call to call us back.
-#
-CLR_ABORT "NO CARRIER"
-HANGUP OFF
-#
-ABORT "Invalid"
-#
-# Now send password and wait to see what happens
-#
-SAY "Sending Callback password ...\n"
-word:--word:  xvsgsgs
-"You will be" \c
-#
-# What can happen now is:
-#   either: we get "You will be called back..." which is the successful case
-#   or:     we get "Invalid login" and we abort (bad login ID or password)
-#   or:     we get "NO CARRIER" because of an error, this will not abort
-#           and we will time out after 30 seconds
-#   or:     we get nothing and we will time out after 30 seconds
-#
-#
-# We reach here if we got "You will be called back..."
-#
-CLR_ABORT "Invalid"
-SAY "Now waiting for Call back ...\n"
-#
-# The remote system will now hangup and we will get both "NO CARRIER"
-# and a hangup signal which are ignored. We now wait for a connection
-# for up to 120 seconds. What happens here if somebody else calls before
-# the remote system is a bit dangerous:
-#
-#   If a malicious user connects and says 'name:', he will see 'PPPuser'
-#   If he then says 'word:' he will see the passowrd 'blipblop'. I may not
-#   know to which systems these belong to, though. It is up to you to consider 
-#   that case and decide wether the risk is too big or not ....
-#
-TIMEOUT 120
-"CONNECT" \c
-#
-# We have been called, re-arm ABORT on NO CARRIER and normal hangup signal
-# behaviour
-#
-HANGUP ON
-ABORT "NO CARRIER"
-#
-# Second stage login in order to start PPP
-#
-SAY "Remote system called back, logging in ...\n"
-SAY "Sending login ID ...\n"
-name:-BREAK-name: PPPuser
-SAY "Sending password ...\n"
-word:--word:  blipblop
-SAY "Asking to start PPP ...\n"
-'CnetSrv' "ppp default"
-"Entering PPP mode" \c
-SAY "ISP PPP started ...\n"
diff --git a/mdk-stage1/ppp/scripts/chatchat/README b/mdk-stage1/ppp/scripts/chatchat/README
deleted file mode 100644
index 88a4c6939..000000000
--- a/mdk-stage1/ppp/scripts/chatchat/README
+++ /dev/null
@@ -1,134 +0,0 @@
-v 0.1 gpk@onramp.net 3/27/99
-
-I Intro
-
-   This document covers the use of the modified "chat" program and its 
-adjunct "chatchat" to login using the Security Dynamics SecurID card
-on a linux system.
-
-   This set of files comprises a modified version of the chat program
-(the one distributed with ppp-2.3.5) and a new program called chatchat
-that allows you to supply data from the keyboard to the chat program.
-
-   The SecurID card generates passwords that have a lifetime of one
-minute and are used as a first layer in dial up security. The only
-software I know of for this card is for windows, so I wrote my own. 
-This software allows you to type in the time-sensitive password right
-when your chat script is asked to supply the passcode by the remote
-system. 
-
-
-II How It Works
-
-   This version of chat his an additional command that can be put into
-its options that says "Don't reply with this string. Open this pipe,
-read the contents, and reply with that instead." Chatchat creates a
-pipe and lets you type your passcode into it, then chat picks that up
-and sends it out just as though the passcode was hardcoded into the
-options. 
-
-
-III Installation 
-
-  I've provided intel binaries and source code the the modified chat 
-program and the chatchat program. I'll recommend that you copy the 
-chat.c program into your ppp-2.3.5/chat directory (save your original 
-chat.c program first!) and re-make it using the Makefile that comes 
-with chat. Copy the new chat somewhere into your path. (On my system
-chat lives in /usr/sbin/chat, so I've copied the modified one into 
-/usr/sbin/chat.new and changed my dial in script to call chat.new
-instead of chat.
-
-  Second, compile chatchat.c and install it somewhere in your path:
-
- gcc -g -o chatchat chatchat.c
- cp chatchat /usr/sbin
-
- Third, modify your chat script to use the chatchat program. Mine
-looks something like this:
-
-
-                       --------------------
-
-#!/bin/sh
-#
-# This is part 2 of the ppp-on script. It will perform the connection
-# protocol for the desired connection.
-# use atm0 to turn down the speaker volume on my sportster x2 voice modem
-# gpk 11/2/97
-
-exec /usr/sbin/chat.new  -V -v                       \
-         ABORT           "BUSY"                     \
-     ABORT              "NO DIAL TONE"      \
-         ABORT           "NO ANSWER"                \
-         TIMEOUT         50                             \
-         ""             "atm0"                  \
-         OK              ATDT$TELEPHONE                  \
-        CONNECT         ''       \
-    name:           \\da0xxxxxx  \
-    word:           @/var/tmp/p \
-        compress.       ''
-
-
-                     -----------------------
-
- This is a standard chat script:
-
-* abort if the modem is busy, you don't get a dial tone, no one
-  answers, or 50 seconds elapses.
-
-* use atm0 to mute the modem
-
-* dial the modem, when it connects, wait to be asked for account name
-
-* when we see "name:" prompt, delay briefly then respond with your 
-  account name (fill in your account name)
-
-Now we get to the new stuff:
-
-* when we see "word:" in the password prompt, instead of responding
-  with "@/var/tmp/p", the modified chat program will open the pipe 
-  /var/tmp/p, read the passcode out of there, and send it
-
-* when we see "compress." (the last word before ppp starts), reply
-  with nothing. The script ends and we start ppp.
-
-Note:
-
-* Make sure there is some whitespace between the filename and the \.
-
-
-IV Usage
-
-   To use this install the modified chat and chatchat programs, and
-modify your chat script similar to the above. Before you dial in,
-start that chatchat program giving it the same pipe as in your config
-file. In the above case:
-
-chatchat /var/tmp/p
-
-   Wait until you have one or two tick marks left on your card's
-current number, then start your dial up process that eventually calls
-chat. When chat goes to open and read the pipe, chatchat will prompt:
-
-
-type PIN into SecurID card and 
- enter resulting passcode:
-
-   At that point, type your PIN number into your Securid card, press
-the diamond, and type the resulting numbers in as your passcode. If
-you've left the -V -v options on your chat command you'll see
-everything so out, otherwise it works silently.
-
-   If you type the number wrong or run out of time, the server will 
-respond with an authentication failure. In that case you will have to 
-hang up and start again. I don't know how to build a conditional script 
-that says either expect "compress" next, but if you see "name:" again, 
-do this instead. 
-
-
-V Additional Information
-
-  You can obtain additional information about chat and ppp from the
-man pages for chat and pppd, as well as the PPP-HOWTO.
-
diff --git a/mdk-stage1/ppp/scripts/chatchat/chatchat.c b/mdk-stage1/ppp/scripts/chatchat/chatchat.c
deleted file mode 100644
index 4534fb9e3..000000000
--- a/mdk-stage1/ppp/scripts/chatchat/chatchat.c
+++ /dev/null
@@ -1,409 +0,0 @@
-/* ************************************************************************* 
-* NAME: chatchat.c
-*
-* DESCRIPTION:
-*
-* This program creates a pipe for the chat process to read. The user
-* can supply information (like a password) that will be picked up
-* by chat and sent just like the regular contents of a chat script.
-*
-* Usage is:
-*
-* chatchat <filename>
-*
-*   where <filename> matches the option given in the chat script.
-*
-* for instance the chat script fragment:
-*
-*       ...
-*        name:           \\dmyname  \
-*        word:           @/var/tmp/p \
-*       ...
-*                                   ^
-*                    (note: leave some whitespace after the filename)
-*
-* expect "name:", reply with a delay followed by "myname"
-* expect "word:", reply with the data read from the pipe /var/tmp/p 
-*
-* the matching usage of chatchat would be:
-*
-* chatchat /var/tmp/p
-*
-* eg:
-*
-* $chatchat /var/tmp/p
-* ...
-*                           some other process eventually starts:
-*                           chat ...
-*                           chat parses the "@/var/tmp/p" option and opens
-*                              /var/tmp/p
-*  (chatchat prompts:)
-*
-* type PIN into SecurID card
-*   enter resulting passcode: [user inputs something]
-*
-*                           chat reads /var/tmp/p & gets what the
-*                              user typed at chatchat's "enter string" prompt
-*                           chat removes the pipe file
-*                           chat sends the user's input as a response in
-*                              place of "@/var/tmp/p"
-*                             
-* PROCESS:
-*
-* gcc -g -o chatchat chatchat.c
-*
-* 
-* GLOBALS: none
-*
-* REFERENCES:
-*
-* see the man pages and documentation that come with the 'chat' program
-* (part of the ppp package). you will need to use the modified chat
-* program that accepts the '@' operator.
-*
-* LIMITATIONS:
-*
-* REVISION HISTORY:
-*
-*   STR                Description                          Author
-*
-*   23-Mar-99          initial coding                        gpk
-*   12-May-99	       unlink the pipe after closing	     paulus
-*
-* TARGET: ANSI C
-* This program is in the public domain.
-* 
-*
-* ************************************************************************* */
-
-
-
-
-#include <sys/time.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <string.h>
-
-/* MAXINPUT - the data typed into chatchat must be fewer   */
-/* characters than this.                                 */
-
-#define MAXINPUT 80
-
-
-
-
-
-
-/* ************************************************************************* 
-
-
-   NAME:  main
-
-
-   USAGE: 
-
-   int argc;
-   char * argv[];
-
-   main(argc, argv[]);
-
-   returns: int
-
-   DESCRIPTION:
-                 if the pipe file name is given on the command line,
-		    create the pipe, prompt the user and put whatever
-		    is typed into the pipe.
-
-		 returns -1 on error
-		     else # characters entered
-   REFERENCES:
-
-   LIMITATIONS:
-
-   GLOBAL VARIABLES:
-
-      accessed: none
-
-      modified: none
-
-   FUNCTIONS CALLED:
-
-   REVISION HISTORY:
-
-        STR                  Description of Revision                 Author
-
-     25-Mar-99               initial coding                           gpk
-
- ************************************************************************* */
-
-int main(int argc, char * argv[])
-{
-  int retval;
-  
-  int create_and_write_pipe(char * pipename);
-
-  if (argc != 2)
-    {
-      fprintf(stderr, "usage: %s pipename\n", argv[0]);
-      retval = -1;
-    }
-  else
-    {
-     retval =  create_and_write_pipe(argv[1]);
-    }
-  return (retval);
-}
-
-
-
-
-/* ************************************************************************* 
-
-
-   NAME:  create_and_write_pipe
-
-
-   USAGE: 
-
-   int some_int;
-   char * pipename;
-
-   some_int =  create_and_write_pipe(pipename);
-
-   returns: int
-
-   DESCRIPTION:
-                 given the pipename, create the pipe, open it,
-		 prompt the user for a string to put into the
-		 pipe, write the string, and close the pipe
-
-		 on error, print out an error message and return -1
-		 
-		 returns -1 on error
-		   else #bytes written into the pipe
-   REFERENCES:
-
-   LIMITATIONS:
-
-   GLOBAL VARIABLES: 
-
-      accessed: none
-
-      modified: none
-
-   FUNCTIONS CALLED:
-
-   REVISION HISTORY:
-
-        STR                  Description of Revision                 Author
-
-     25-Mar-99               initial coding                           gpk
-     12-May-99		     remove pipe after closing		     paulus
-
- ************************************************************************* */
-
-int create_and_write_pipe(char * pipename)
-{
-  int retval, created, pipefd, nread, nwritten;
-  char input[MAXINPUT];
-  char errstring[180];
-  
-  int create_pipe(char * pipename);
-  int write_to_pipe(int pipefd, char * input, int nchar);
-
-  created = create_pipe(pipename);
-
-  if (-1 == created)
-    {
-      sprintf(errstring, "unable to create pipe '%s'", pipename);
-      perror(errstring);
-      retval = -1;
-    }
-  else
-    {
-
-      /* note: this open won't succeed until chat has the pipe  */
-      /* open and ready to read. this makes for nice timing.    */
-      
-      pipefd = open(pipename, O_WRONLY);
-
-      if (-1 == pipefd)
-	{
-	  sprintf(errstring, "unable to open pipe '%s'", pipename);
-	  perror(errstring);
-	  retval =  -1;
-	}
-      else
-	{
-	  fprintf(stderr, "%s \n %s",
-		  "type PIN into SecurID card and",
-		  "enter resulting passcode:");
-	  nread = read(STDIN_FILENO, (void *)input, MAXINPUT);
-
-	  
-	  if (0 >= nread)
-	    {
-	      perror("unable to read from stdin");
-	      retval = -1;
-	    }
-	  else
-	    {
-	      /* munch off the newline character, chat supplies  */
-	      /* a return when it sends the string out.          */
-	      input[nread -1] = 0;
-	      nread--;
-	      nwritten = write_to_pipe(pipefd, input, nread);
-	      /* printf("wrote [%d]: '%s'\n", nwritten, input); */
-	      retval = nwritten;
-	    }
-	  close(pipefd);
-
-	  /* Now make the pipe go away.  It won't actually go away
-	     completely until chat closes it. */
-	  if (unlink(pipename) < 0)
-	      perror("Warning: couldn't remove pipe");
-	}
-    }
-  return(retval);
-}
-
-
-
-
-
-
-
-/* ************************************************************************* 
-
-
-   NAME:  create_pipe
-
-
-   USAGE: 
-
-   int some_int;
-   char * pipename;
-   
-   some_int =  create_pipe(pipename);
-   
-   returns: int
-   
-   DESCRIPTION:
-                 create a pipe of the given name
-
-		 if there is an error (like the pipe already exists)
-		    print an error message and return
-		    
-		 return -1 on failure else success
-
-   REFERENCES:
-
-   LIMITATIONS:
-
-   GLOBAL VARIABLES:
-
-      accessed: none
-
-      modified: none
-
-   FUNCTIONS CALLED:
-
-   REVISION HISTORY:
-
-        STR                  Description of Revision                 Author
-
-     25-Mar-99               initial coding                           gpk
-
- ************************************************************************* */
-
-int create_pipe(char * pipename)
-{
-  mode_t old_umask;
-  int created;
-
-  /* hijack the umask temporarily to get the mode I want  */
-  /* on the pipe.                                         */
-  
-  old_umask = umask(000);
-
-  created = mknod(pipename, S_IFIFO | S_IRWXU | S_IWGRP | S_IWOTH,
-		  (dev_t)NULL);
-
-  /* now restore umask.  */
-  
-  (void)umask(old_umask);
-  
-  if (-1 == created)
-    {
-      perror("unable to create pipe");
-    }
-
-  return(created);
-}
-
-
-
-
-
-
-/* ************************************************************************* 
-
-
-   NAME:  write_to_pipe
-
-
-   USAGE: 
-
-   int some_int;
-   int pipefd;
-   char * input;
-   int nchar;
-
-   some_int =  write_to_pipe(pipefd, input, nchar);
-
-   returns: int
-
-   DESCRIPTION:
-                 write nchars of data from input to pipefd
-
-		 on error print a message to stderr
-
-		 return -1 on error, else # bytes written
-   REFERENCES:
-
-   LIMITATIONS:
-
-   GLOBAL VARIABLES:
-
-      accessed: none
-
-      modified: none
-
-   FUNCTIONS CALLED:
-
-   REVISION HISTORY:
-
-        STR                  Description of Revision                 Author
-
-     25-Mar-99               initial coding                           gpk
-     12-May-99		     don't write count word first	      paulus
-
- ************************************************************************* */
-
-int write_to_pipe(int pipefd, char * input, int nchar)
-{
-  int nwritten;
-
-  /* nwritten = write(pipefd, (void *)&nchar, sizeof(nchar)); */
-  nwritten = write(pipefd, (void *)input, nchar);
-
-  if (-1 == nwritten)
-    {
-      perror("unable to write to pipe");
-    }
-
-  return(nwritten);
-}
diff --git a/mdk-stage1/ppp/scripts/ip-down.local.add b/mdk-stage1/ppp/scripts/ip-down.local.add
deleted file mode 100644
index b93590e49..000000000
--- a/mdk-stage1/ppp/scripts/ip-down.local.add
+++ /dev/null
@@ -1,20 +0,0 @@
-
-#
-# This sample code shows you one way to modify your setup to allow automatic
-# configuration of your resolv.conf for peer supplied DNS addresses when using
-# the `usepeerdns' option.
-#
-# In my case I just added this to my /etc/ppp/ip-down.local script. You may need to 
-# create an executable script if one does not exist.
-#
-# Nick Walker (nickwalker@email.com)
-#
-
-if [ -n "$USEPEERDNS" -a -f /etc/ppp/resolv.conf ]; then
-	if [ -f /etc/ppp/resolv.prev ]; then
-		cp -f /etc/ppp/resolv.prev /etc/resolv.conf
-	else
-		rm -f /etc/resolv.conf
-	fi
-fi
-
diff --git a/mdk-stage1/ppp/scripts/ip-up.local.add b/mdk-stage1/ppp/scripts/ip-up.local.add
deleted file mode 100644
index 80172093a..000000000
--- a/mdk-stage1/ppp/scripts/ip-up.local.add
+++ /dev/null
@@ -1,24 +0,0 @@
-
-#
-# This sample code shows you one way to modify your setup to allow automatic
-# configuration of your resolv.conf for peer supplied DNS addresses when using
-# the `usepeerdns' option.
-#
-# In my case I just added this to my /etc/ppp/ip-up.local script. You may need to 
-# create an executable script if one does not exist.
-#
-# Nick Walker (nickwalker@email.com)
-#
-
-if [ -n "$USEPEERDNS" -a -f /etc/ppp/resolv.conf ]; then
-	rm -f /etc/ppp/resolv.prev
-	if [ -f /etc/resolv.conf ]; then
-		cp /etc/resolv.conf /etc/ppp/resolv.prev
-		grep domain /etc/ppp/resolv.prev > /etc/resolv.conf
-		grep search /etc/ppp/resolv.prev >> /etc/resolv.conf
-		cat /etc/ppp/resolv.conf >> /etc/resolv.conf
-	else
-		cp /etc/ppp/resolv.conf /etc
-	fi
-fi
-
diff --git a/mdk-stage1/ppp/scripts/options-rsh-loc b/mdk-stage1/ppp/scripts/options-rsh-loc
deleted file mode 100644
index b015b87fe..000000000
--- a/mdk-stage1/ppp/scripts/options-rsh-loc
+++ /dev/null
@@ -1 +0,0 @@
-debug asyncmap FFFFFFFF escape FF kdebug 0 noipdefault nodefaultroute noauth mtu 1460
diff --git a/mdk-stage1/ppp/scripts/options-rsh-rem b/mdk-stage1/ppp/scripts/options-rsh-rem
deleted file mode 100644
index 4b10bb9e9..000000000
--- a/mdk-stage1/ppp/scripts/options-rsh-rem
+++ /dev/null
@@ -1 +0,0 @@
-notty debug asyncmap FFFFFFFF escape FF kdebug 0 noipdefault nodefaultroute noauth mtu 1460
diff --git a/mdk-stage1/ppp/scripts/options-ssh-loc b/mdk-stage1/ppp/scripts/options-ssh-loc
deleted file mode 100644
index add03d659..000000000
--- a/mdk-stage1/ppp/scripts/options-ssh-loc
+++ /dev/null
@@ -1 +0,0 @@
-debug asyncmap FFFFFFFF escape FF kdebug 0 noipdefault nodefaultroute noauth mtu 1400
diff --git a/mdk-stage1/ppp/scripts/options-ssh-rem b/mdk-stage1/ppp/scripts/options-ssh-rem
deleted file mode 100644
index d690722c6..000000000
--- a/mdk-stage1/ppp/scripts/options-ssh-rem
+++ /dev/null
@@ -1 +0,0 @@
-notty debug asyncmap FFFFFFFF escape FF kdebug 0 noipdefault nodefaultroute noauth mtu 1400
diff --git a/mdk-stage1/ppp/scripts/ppp-off b/mdk-stage1/ppp/scripts/ppp-off
deleted file mode 100755
index a22b5ea3d..000000000
--- a/mdk-stage1/ppp/scripts/ppp-off
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-######################################################################
-#
-# Determine the device to be terminated.
-#
-if [ "$1" = "" ]; then
-	DEVICE=ppp0
-else
-	DEVICE=$1
-fi
-
-######################################################################
-#
-# If the ppp0 pid file is present then the program is running. Stop it.
-if [ -r /var/run/$DEVICE.pid ]; then
-        kill -INT `cat /var/run/$DEVICE.pid`
-#
-# If the kill did not work then there is no process running for this
-# pid. It may also mean that the lock file will be left. You may wish
-# to delete the lock file at the same time.
-        if [ ! "$?" = "0" ]; then
-                rm -f /var/run/$DEVICE.pid
-                echo "ERROR: Removed stale pid file"
-                exit 1
-        fi
-#
-# Success. Let pppd clean up its own junk.
-        echo "PPP link to $DEVICE terminated."
-        exit 0
-fi
-#
-# The ppp process is not running for ppp0
-echo "ERROR: PPP link is not active on $DEVICE"
-exit 1
diff --git a/mdk-stage1/ppp/scripts/ppp-on b/mdk-stage1/ppp/scripts/ppp-on
deleted file mode 100755
index ab79db471..000000000
--- a/mdk-stage1/ppp/scripts/ppp-on
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-#
-# Script to initiate a ppp connection. This is the first part of the
-# pair of scripts. This is not a secure pair of scripts as the codes
-# are visible with the 'ps' command.  However, it is simple.
-#
-# These are the parameters. Change as needed.
-TELEPHONE=555-1212	# The telephone number for the connection
-ACCOUNT=george		# The account name for logon (as in 'George Burns')
-PASSWORD=gracie		# The password for this account (and 'Gracie Allen')
-LOCAL_IP=0.0.0.0	# Local IP address if known. Dynamic = 0.0.0.0
-REMOTE_IP=0.0.0.0	# Remote IP address if desired. Normally 0.0.0.0
-NETMASK=255.255.255.0	# The proper netmask if needed
-#
-# Export them so that they will be available at 'ppp-on-dialer' time.
-export TELEPHONE ACCOUNT PASSWORD
-# 
-# This is the location of the script which dials the phone and logs
-# in.  Please use the absolute file name as the $PATH variable is not
-# used on the connect option.  (To do so on a 'root' account would be
-# a security hole so don't ask.)
-#
-DIALER_SCRIPT=/etc/ppp/ppp-on-dialer
-#
-# Initiate the connection
-# 
-# I put most of the common options on this command. Please, don't
-# forget the 'lock' option or some programs such as mgetty will not
-# work. The asyncmap and escape will permit the PPP link to work with
-# a telnet or rlogin connection. You are welcome to make any changes
-# as desired. Don't use the 'defaultroute' option if you currently
-# have a default route to an ethernet gateway.
-#
-exec /usr/sbin/pppd debug lock modem crtscts /dev/ttyS0 38400 \
-	asyncmap 20A0000 escape FF kdebug 0 $LOCAL_IP:$REMOTE_IP \
-	noipdefault netmask $NETMASK defaultroute connect $DIALER_SCRIPT
diff --git a/mdk-stage1/ppp/scripts/ppp-on-dialer b/mdk-stage1/ppp/scripts/ppp-on-dialer
deleted file mode 100755
index 7d66765f1..000000000
--- a/mdk-stage1/ppp/scripts/ppp-on-dialer
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-#
-# This is part 2 of the ppp-on script. It will perform the connection
-# protocol for the desired connection.
-#
-exec chat -v						\
-	TIMEOUT		3				\
-	ABORT		'\nBUSY\r'			\
-	ABORT		'\nNO ANSWER\r'			\
-	ABORT		'\nRINGING\r\n\r\nRINGING\r'	\
-	''		\rAT				\
-	'OK-+++\c-OK'	ATH0				\
-	TIMEOUT		30				\
-	OK		ATDT$TELEPHONE			\
-	CONNECT		''				\
-	ogin:--ogin:	$ACCOUNT			\
-	assword:	$PASSWORD
diff --git a/mdk-stage1/ppp/scripts/ppp-on-rsh b/mdk-stage1/ppp/scripts/ppp-on-rsh
deleted file mode 100755
index 30a50dba6..000000000
--- a/mdk-stage1/ppp/scripts/ppp-on-rsh
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/sh
-#
-# A sample script to establish PPP session(s) via rsh
-#
-# Adi Masputra <adi.masputra@sun.com>
-# Jan 24, 2000
-#
-
-#
-# You'd definitely want to change the following addresses to suit
-# your network configuration
-#
-LOC_IP=10.0.0.1
-REM_IP=10.0.0.2
-NETMASK=255.255.0.0
-
-export LOC_IP REM_IP
-
-#
-# This is the remote peer where in.rshd is running, either
-# its hostname or IP address
-#
-PPPD_RHOST=myremotehost
-
-#
-# For this example, we assume that pppd on both local and remote
-# machines reside in the same place, /usr/local/bin/pppd
-#
-PPPD_LOC=/usr/local/bin/pppd
-
-#
-# The location of local options file (where rsh client is running).
-# Note that the sample options file included in the distribution
-# may need further customizations, depending on your needs. The 'noauth'
-# option specified in the file is there to simplify the example. In
-# reality, you'd probably want to remove such option.
-#
-PPPD_LOC_OPT=/etc/ppp/options-rsh-loc
-
-#
-# The location of remote options file (where in.rshd daemon is running).
-# Note that the sample options file included in the distribution
-# may need further customizations, depending on your needs. The 'noauth'
-# option specified in the file is there to simplify the example. In
-# reality, you'd probably want to remove such option. Also note that
-# the remote options file need to include the 'notty' option for this
-# to work
-#
-PPPD_REM_OPT=/etc/ppp/options-rsh-rem
-
-#
-# The location of rsh client on the local machine
-#
-RSH_LOC=/bin/rsh
-
-export PPPD_LOC PPPD_LOC_OPT PPPD_REM_OPT PPPD_RHOST RSH_LOC
-
-#
-# Uncomment the following to enable IPv6, note that the IPv6 support 
-# needs to be enabled during compilation
-#
-# PPPD_IPV6='+ipv6 ipv6cp-use-ipaddr'
-export PPPD_IPV6
-
-#
-# And execute pppd with the pty option, specifying rsh client as the
-# slave side of the pseduo-tty master/slave pair.
-#
-exec $PPPD_LOC \
-        pty '$RSH_LOC $PPPD_RHOST $PPPD_LOC $REM_IP:$LOC_IP $PPPD_IPV6 file $PPPD_REM_OPT' \
-        $LOC_IP:$REM_IP netmask $NETMASK $PPPD_IPV6 file $PPPD_LOC_OPT
-
diff --git a/mdk-stage1/ppp/scripts/ppp-on-ssh b/mdk-stage1/ppp/scripts/ppp-on-ssh
deleted file mode 100755
index 0e41acac6..000000000
--- a/mdk-stage1/ppp/scripts/ppp-on-ssh
+++ /dev/null
@@ -1,76 +0,0 @@
-#!/bin/sh
-#
-# A sample script to establish PPP session(s) via SSH 1.x
-#
-# Adi Masputra <adi.masputra@sun.com>
-# Jan 24, 2000
-#
-
-#
-# You'd definitely want to change the following addresses to suit
-# your network configuration
-#
-LOC_IP=10.0.0.1
-REM_IP=10.0.0.2
-NETMASK=255.255.0.0
-
-export LOC_IP REM_IP
-
-#
-# This is the remote peer where sshd is running, either
-# its hostname or IP address
-#
-PPPD_RHOST=myremotehost
-
-#
-# For this example, we assume that pppd on both local and remote
-# machines reside in the same place, /usr/local/bin/pppd
-#
-PPPD_LOC=/usr/local/bin/pppd
-
-#
-# The location of local options file (where ssh client is running).
-# Note that the sample options file included in the distribution
-# may need further customizations, depending on your needs. The 'noauth'
-# option specified in the file is there to simplify the example, although
-# some may choose to have it there and rely on ssh authentication
-# instead.
-#
-PPPD_LOC_OPT=/etc/ppp/options-ssh-loc
-
-#
-# The location of remote options file (where sshd daemon is running)
-# Note that the sample options file included in the distribution
-# may need further customizations, depending on your needs. The 'noauth'
-# option specified in the file is there to simplify the example, although
-# some may choose to have it there and rely on ssh authentication
-# instead. Also note that the remote options file need to include the 'notty'
-# options for this to work.
-#
-PPPD_REM_OPT=/etc/ppp/options-ssh-rem
-
-#
-# The location of ssh client on the local machine
-#
-SSH_LOC=/usr/local/bin/ssh
-
-export PPPD_LOC PPPD_LOC_OPT PPPD_REM_OPT PPPD_RHOST SSH_LOC
-
-#
-# Uncomment the following to enable IPv6, note that the IPv6 support 
-# needs to be enabled during compilation
-#
-# PPPD_IPV6='+ipv6 ipv6cp-use-ipaddr'
-export PPPD_IPV6
-
-#
-# And execute pppd with the pty option, specifying ssh client as the
-# slave side of the pseudo-tty master/slave pair. Note that on this example,
-# ssh has been compiled to allow NULL encryption (thus the '-c none' option),
-# but in reality, you'd probably want to specify the encryption algorithm.
-# See the man page of ssh(1) for details.
-#
-exec $PPPD_LOC \
-        pty '$SSH_LOC -c none $PPPD_RHOST $PPPD_LOC $REM_IP:$LOC_IP $PPPD_IPV6 file $PPPD_REM_OPT' \
-        $LOC_IP:$REM_IP netmask $NETMASK $PPPD_IPV6 file $PPPD_LOC_OPT
-
diff --git a/mdk-stage1/ppp/scripts/redialer b/mdk-stage1/ppp/scripts/redialer
deleted file mode 100755
index 5bbde4e9d..000000000
--- a/mdk-stage1/ppp/scripts/redialer
+++ /dev/null
@@ -1,96 +0,0 @@
-#!/bin/sh
-###################################################################
-#
-# These parameters control the attack dialing sequence.
-#
-# Maximum number of attempts to reach the telephone number(s)
-MAX_ATTEMPTS=10
-
-# Delay between each of the attempts. This is a parameter to sleep
-# so use "15s" for 15 seconds, "1m" for 1 minute, etc.
-SLEEP_DELAY=15s
-
-###################################################################
-#
-# This is a list of telephone numbers. Add new numbers if you wish
-# and see the function 'callall' below for the dial process.
-PHONE1=555-1212
-PHONE2=411
-
-###################################################################
-#
-# If you use the ppp-on script, then these are passed to this routine
-# automatically. There is no need to define them here. If not, then
-# you will need to set the values.
-#
-ACCOUNT=my_account_name
-PASSWORD=my_password
-
-###################################################################
-#
-# Function to initialize the modem and ensure that it is in command
-# state. This may not be needed, but it doesn't hurt.
-#
-function initialize
-{
-    chat -v TIMEOUT 3 '' AT 'OK-+++\c-OK'
-    return
-}
-
-###################################################################
-#
-# Script to dial a telephone
-#
-function callnumber
-{
-chat -v							\
-	ABORT		'\nBUSY\r'			\
-	ABORT		'\nNO ANSWER\r'			\
-	ABORT		'\nRINGING\r\n\r\nRINGING\r'	\
-	''		ATDT$1				\
-	CONNECT		''				\
-	ogin:--ogin:	$ACCOUNT			\
-	assword:	$PASSWORD
-#
-# If the connection was successful then end the whole script with a
-# success.
-#
-    if [ "$?" = "0" ]; then
-       exit 0
-    fi
-
-    return
-}
-
-###################################################################
-#
-# Script to dial any telephone number
-#
-function callall
-{
-#   echo "dialing attempt number: $1" >/dev/console
-    callnumber $PHONE1
-#    callnumber $PHONE2
-}
-
-###################################################################
-#
-# Initialize the modem to ensure that it is in the command state
-#
-initialize
-if [ ! "$?" = "0" ]; then
-   exit 1
-fi
-
-#
-# Dial telephone numbers until one answers
-#
-attempt=0
-while : ; do
-    attempt=`expr $attempt + 1`
-    callall $attempt
-    if [ "$attempt" = "$MAX_ATTEMPTS" ]; then
-	exit 1
-    fi	
-    sleep "$SLEEP_DELAY"
-done
diff --git a/mdk-stage1/ppp/scripts/secure-card b/mdk-stage1/ppp/scripts/secure-card
deleted file mode 100644
index a32138b7d..000000000
--- a/mdk-stage1/ppp/scripts/secure-card
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/usr/local/bin/expect -f
-#
-# This  script was  written  by  Jim Isaacson  <jcisaac@crl.com>.  It is
-# designed to work  as a script to use the  SecureCARD(tm) device.  This
-# little device is mated with a central controller. The number displayed
-# on this card changes every so often and  you need to enter  the number
-# along with your user account name in order to gain access.  Since chat
-# is based upon fixed strings this procedure will not work with chat.
-#
-# It is included by permission. An excellent reference for the expect
-# program used by this script is in the book:
-#
-# "Exploring Expect"
-# by Don Libes
-# Published by O'Rielly and Associates
-#
-
-send_user "hello, starting ppp\n"
-
-system "stty 19200 -echoe -echo raw < /dev/cua3 > /dev/cua3"
-
-#
-# These are the parameters for the program.
-#
-set user      Pxxxxxx
-set password  xxxxxxx 
-set modem     /dev/cua3
-set dialup    <put phone number here>
-set timeout   60
-
-spawn -noecho -open [open $modem "r+"]
-
-send "AT&F\r"
-expect "OK"
-
-send "ATe0v1x4&c1q0&d2&c1s2=128s0=0DT $dialup\r"
-set timeout 15
-set counter 0
-
-set still_connecting 1
-
-expect {
-	-re ".*CONNECT.*\n" {
-		set timeout 5
-		set still_connecting 0
-		continue -expect
-	}
-	-re ".*CONNECT.*\r" {
-		set timeout 5
-		set still_connecting 0
-		continue -expect
-	}
-        -re ".*NO.*CARRIER" {
-		send_user "Failed to Connect, exiting...\n"
-		exit
-        }
-        -re ".*NO.*DIAL.*TONE" {
-		send_user "Failed to Connect, exiting...\n"
-		exit
-        }
-        -re ".*VOICE" {
-		send_user "Failed to Connect, exiting...\n"
-		exit
-        }
-	-re ".*sscode:.*\n" {
-		continue -expect
-	}
-	-re ".*sscode:" {
-                set timeout -1
-		expect_user -re "(.*)\n"
-		send "$expect_out(1,string)\r"
-		set timeout 30
-		continue -expect
-	}
-	-re ".*Next.*:" {
-                set timeout -1
-		expect_user -re "(.*)\n"
-		send "$expect_out(1,string)\r"
-		set timeout 30
-		continue -expect
-	}
-	-re "Your.*" {
-		send "\r"
-		continue -expect
-	}
-	-re ".*in:" {
-		send "$user\r"
-		continue -expect
-	}
-	-re ".*word:" {
-		send "$password\r"
-	}
-
-	timeout {
-		if { $still_connecting > 0 } {
-			continue -expect 
-			}
-		set timeout 15
-		send "\r"
-		incr counter
-		if { $counter > 8 } {
-			send_user "Cannot Connect\n"
-			exit
-		} else {
-			continue -expect
-		}
-	}
-}
-
-overlay -0 $spawn_id -1 $spawn_id pppd /dev/cua3 19200 192.111.187.215: \
-	crtscts modem defaultroute debug 
diff --git a/mdk-stage1/ppp/solaris/Makedefs b/mdk-stage1/ppp/solaris/Makedefs
deleted file mode 100644
index 81db8ab2e..000000000
--- a/mdk-stage1/ppp/solaris/Makedefs
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# defines common to several Makefiles
-#
-
-INSTALL= /usr/sbin/install
-
-BINDIR = /usr/local/bin
-MANDIR = /usr/local/man
-ETCDIR = /etc/ppp
-
-COPTS = -O -Xa
-
-# For compiling with gcc, comment out the COPTS definition above and
-# uncomment the next 2 definitions.
-#CC = gcc
-#COPTS = -O2
diff --git a/mdk-stage1/ppp/solaris/Makedefs.sol2 b/mdk-stage1/ppp/solaris/Makedefs.sol2
deleted file mode 100644
index 1282c6e74..000000000
--- a/mdk-stage1/ppp/solaris/Makedefs.sol2
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# Generic make definitions for Solaris 2
-#
-# $Id$
-#
-
-include ../solaris/Makedefs
-
-CPPFLAGS	= -D_KERNEL -DSVR4 -DSOL2 -DPRIOQ -DDEBUG -I../include
-CFLAGS		= $(CPPFLAGS) $(COPTS)
-
-# lint-specific variables
-LINT            = lint
-LINT_OPT_32     =
-LINT_OPT_64     = -Xarch=v9 -errchk=longptr64
-
-LINT_32     	=
-LINT_32     	+= -erroff=E_BAD_PTR_CAST_ALIGN
-LINT_32     	+= -erroff=E_SUPPRESSION_DIRECTIVE_UNUSED
-LINT_32     	+= -erroff=E_SUSPICIOUS_COMPARISON
-LINT_32     	+= -erroff=E_CAST_UINT_TO_SIGNED_INT
-LINT_32     	+= -erroff=E_PASS_UINT_TO_SIGNED_INT
-LINT_32     	+= -erroff=E_INVALID_ANNOTATION_NAME
-LINT_32     	+= -erroff=E_FUNC_ARG_UNUSED
-# This might be needed, but zlib.c and vjcompress.c will squawk 
-# when not ignored
-LINT_32		+= -erroff=E_CASE_FALLTHRU
-LINT_32		+= -erroff=E_RET_INT_IMPLICITLY
-LINT_32		+= -erroff=E_FUNC_NO_RET_VAL
-# Some STREAMS macros will be noisy too when this isn't ignored
-LINT_32		+= -erroff=E_CONSTANT_CONDITION
-LINT_32		+= -erroff=E_CONST_EXPR
-
-# Extra noise suppressant for 64-bit
-EXTRA_OFF 	=
-EXTRA_OFF 	+= -erroff=E_CAST_INT_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_CAST_INT_CONST_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_CAST_TO_PTR_FROM_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_INT_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_INT_FROM_BIG_CONST
-EXTRA_OFF 	+= -erroff=E_CONST_PROMOTED_UNSIGNED_LL
-EXTRA_OFF 	+= -erroff=E_CONST_PROMOTED_LONG_LONG
-EXTRA_OFF 	+= -erroff=E_CONST_TRUNCATED_BY_ASSIGN
-EXTRA_OFF 	+= -erroff=E_PASS_INT_FROM_BIG_CONST
-EXTRA_OFF 	+= -erroff=E_COMP_INT_WITH_LARGE_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_UINT_TO_SIGNED_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_NARROW_CONV
-EXTRA_OFF 	+= -erroff=E_PASS_INT_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_PTR_CONV_LOSES_BITS
-
-LINT_64     	= $(LINT_32)
-LINT_64     	+= $(EXTRA_OFF)
-
-LINTFLAGS64     = -Xa -nsxmuF -errtags=yes $(LINT_OPT_64) $(LINT_64)
-LINT64          = $(LINT) -c $(LINTFLAGS64) $(CPPFLAGS)
-
-LINTFLAGS32     = -Xa -nsxmuF -errtags=yes $(LINT_OPT_32) $(LINT_32)
-LINT32          = $(LINT) -c $(LINTFLAGS32) $(CPPFLAGS)
-
diff --git a/mdk-stage1/ppp/solaris/Makefile.sol2 b/mdk-stage1/ppp/solaris/Makefile.sol2
deleted file mode 100644
index 78628847b..000000000
--- a/mdk-stage1/ppp/solaris/Makefile.sol2
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-# Makefile for STREAMS modules for Solaris 2.
-#
-# $Id$
-#
-
-include Makedefs.sol2
-
-COPTS += -xO2 -xspace -W0,-Lt
-
-COMP_OBJS = ppp_comp.o bsd-comp.o deflate.o zlib.o vjcompress.o \
-	ppp_comp_mod.o
-
-all:	ppp ppp_ahdl ppp_comp
-
-ppp:	ppp.o ppp_mod.o
-	ld -r -o $@ ppp.o ppp_mod.o
-	chmod +x $@
-
-ppp_ahdl: ppp_ahdlc.o ppp_ahdlc_mod.o
-	ld -r -o $@ ppp_ahdlc.o ppp_ahdlc_mod.o
-	chmod +x $@
-
-ppp_comp: $(COMP_OBJS)
-	ld -r -o $@ $(COMP_OBJS)
-	chmod +x $@
-
-bsd-comp.o:	../modules/bsd-comp.c
-	$(CC) $(CFLAGS) -c $?
-deflate.o:	../modules/deflate.c
-	$(CC) $(CFLAGS) -c $?
-ppp.o:	ppp.c
-	$(CC) $(CFLAGS) -c $?
-ppp_mod.o:	ppp_mod.c
-	$(CC) $(CFLAGS) -c $?
-ppp_ahdlc_mod.o: ppp_ahdlc_mod.c
-	$(CC) $(CFLAGS) -c $?
-ppp_ahdlc.o: ppp_ahdlc.c
-	$(CC) $(CFLAGS) -c $?
-ppp_comp.o: ppp_comp.c
-	$(CC) $(CFLAGS) -c $?
-ppp_comp_mod.o:	ppp_comp_mod.c
-	$(CC) $(CFLAGS) -c $?
-vjcompress.o:	../modules/vjcompress.c
-	$(CC) $(CFLAGS) -c $?
-zlib.o:	../common/zlib.c
-	$(CC) $(CFLAGS) -c $?
-
-install:
-	cp ppp ppp.conf /kernel/drv
-	cp ppp_comp ppp_ahdl /kernel/strmod
-	if grep clone:ppp /etc/minor_perm; then :; else \
-	  echo clone:ppp 0644 root sys >>/etc/minor_perm; fi
-	/usr/sbin/rem_drv ppp 2>/dev/null || true
-	/usr/sbin/add_drv ppp
-
-SRCS	= ppp.c ppp_mod.c ppp_ahdlc.c ppp_ahdlc_mod.c \
-	ppp_comp.c ../modules/bsd-comp.c ../modules/deflate.c \
-	../common/zlib.c ../modules/vjcompress.c ppp_comp_mod.c
-
-lint:
-	$(LINT32) $(SRCS)
-
-clean:
-	rm -f ppp ppp_comp ppp_ahdl *.o *~ core
-	rm -f *.ln
diff --git a/mdk-stage1/ppp/solaris/Makefile.sol2-64 b/mdk-stage1/ppp/solaris/Makefile.sol2-64
deleted file mode 100644
index 63e75fc54..000000000
--- a/mdk-stage1/ppp/solaris/Makefile.sol2-64
+++ /dev/null
@@ -1,85 +0,0 @@
-#
-# Makefile for 64-bit STREAMS modules for Solaris 2.
-#
-# $Id$
-#
-
-include Makedefs.sol2
-
-# Sun's cc flag for LP64 compilation / linkage
-COPTS 		+= -xchip=ultra -xarch=v9 -Wc,-xcode=abs32 -Wc,-Qiselect-regsym=0 -xO3 -xspace -W0,-Lt
-
-# subdirectory where 64-bit objects / binaries will be placed
-LP64DIR		= sparcv9
-
-# Name of legacy Makefile (for 32-bit binaries)
-STD_MAKE	= Makefile.sol2
-
-COMP_OBJS	= $(LP64DIR)/ppp_comp.o $(LP64DIR)/bsd-comp.o \
-		$(LP64DIR)/deflate.o $(LP64DIR)/zlib.o $(LP64DIR)/vjcompress.o \
-		$(LP64DIR)/ppp_comp_mod.o
-
-all:	std_objs $(LP64DIR) ppp ppp_ahdl ppp_comp
-
-std_objs:
-	$(MAKE) -f $(STD_MAKE) all
-
-ppp:	$(LP64DIR)/ppp.o $(LP64DIR)/ppp_mod.o
-	ld -r -o $(LP64DIR)/$@ $(LP64DIR)/ppp.o $(LP64DIR)/ppp_mod.o
-	chmod +x $(LP64DIR)/$@
-
-ppp_ahdl: $(LP64DIR)/ppp_ahdlc.o $(LP64DIR)/ppp_ahdlc_mod.o
-	ld -r -o $(LP64DIR)/$@ $(LP64DIR)/ppp_ahdlc.o $(LP64DIR)/ppp_ahdlc_mod.o
-	chmod +x $(LP64DIR)/$@
-
-ppp_comp: $(COMP_OBJS)
-	ld -r -o $(LP64DIR)/$@ $(COMP_OBJS)
-	chmod +x $(LP64DIR)/$@
-
-$(LP64DIR)/bsd-comp.o: ../modules/bsd-comp.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/deflate.o: ../modules/deflate.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp.o:	ppp.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_mod.o:	ppp_mod.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_ahdlc_mod.o: ppp_ahdlc_mod.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_ahdlc.o: ppp_ahdlc.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_comp.o: ppp_comp.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_comp_mod.o: ppp_comp_mod.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/vjcompress.o: ../modules/vjcompress.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/zlib.o:	../common/zlib.c
-	$(CC) $(CFLAGS) -c $? -o $@
-
-$(LP64DIR):
-	mkdir -m 755 -p $@
-
-install:
-	cp ppp ppp.conf /kernel/drv
-	cp ppp_comp ppp_ahdl /kernel/strmod
-	cp $(LP64DIR)/ppp /kernel/drv/$(LP64DIR)
-	cp $(LP64DIR)/ppp_comp $(LP64DIR)/ppp_ahdl /kernel/strmod/$(LP64DIR)
-	if grep clone:ppp /etc/minor_perm; then :; else \
-	  echo clone:ppp 0644 root sys >>/etc/minor_perm; fi
-	/usr/sbin/rem_drv ppp 2>/dev/null || true
-	/usr/sbin/add_drv ppp
-
-SRCS	= ppp.c ppp_mod.c ppp_ahdlc.c ppp_ahdlc_mod.c \
-	ppp_comp.c ../modules/bsd-comp.c ../modules/deflate.c \
-	../common/zlib.c ../modules/vjcompress.c ppp_comp_mod.c
-
-lint:
-	$(LINT64) $(SRCS)
-
-lint-32:
-	$(LINT32) $(SRCS)
-
-clean:
-	$(MAKE) -f $(STD_MAKE) clean
-	rm -f $(LP64DIR)/ppp $(LP64DIR)/ppp_comp $(LP64DIR)/ppp_ahdl $(LP64DIR)/*.o $(LP64DIR)/*~ $(LP64DIR)/core
diff --git a/mdk-stage1/ppp/solaris/Makefile.top b/mdk-stage1/ppp/solaris/Makefile.top
deleted file mode 100644
index f1200b852..000000000
--- a/mdk-stage1/ppp/solaris/Makefile.top
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# ppp top level makefile for SVR4 and Solaris 2
-#
-# $Id$
-#
-
-include solaris/Makedefs
-
-all:
-	cd chat; $(MAKE) all
-	cd pppd; $(MAKE) all
-	cd pppstats; $(MAKE) all
-	cd pppdump; $(MAKE) all
-	cd solaris; $(MAKE) all
-
-install: $(BINDIR) $(MANDIR)/man8 install-progs install-etcppp
-
-install-progs:
-	cd chat; $(MAKE) install
-	cd pppd; $(MAKE) install
-	cd pppstats; $(MAKE) install
-	cd pppdump; $(MAKE) install
-	cd solaris; $(MAKE) install
-
-install-etcppp: $(ETCDIR) $(ETCDIR)/options $(ETCDIR)/pap-secrets \
-	$(ETCDIR)/chap-secrets
-
-$(ETCDIR)/options:
-	cp etc.ppp/options $@
-	chmod go-w $@
-$(ETCDIR)/pap-secrets:
-	$(INSTALL) -f $(ETCDIR) -m 600 etc.ppp/pap-secrets
-$(ETCDIR)/chap-secrets:
-	$(INSTALL) -f $(ETCDIR) -m 600 etc.ppp/chap-secrets
-
-$(BINDIR):
-	mkdir -m 755 -p $@
-$(MANDIR)/man8:
-	mkdir -m 755 -p $@
-$(ETCDIR):
-	mkdir -m 755 -p $@
-
-clean:
-	rm -f *~
-	cd chat; $(MAKE) clean
-	cd pppd; $(MAKE) clean
-	cd pppstats; $(MAKE) clean
-	cd pppdump; $(MAKE) clean
-	cd solaris; $(MAKE) clean
-
diff --git a/mdk-stage1/ppp/solaris/ppp.c b/mdk-stage1/ppp/solaris/ppp.c
deleted file mode 100644
index 44bf08dff..000000000
--- a/mdk-stage1/ppp/solaris/ppp.c
+++ /dev/null
@@ -1,2486 +0,0 @@
-/*
- * ppp.c - STREAMS multiplexing pseudo-device driver for PPP.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2, SVR4, SunOS 4, and Digital UNIX.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <sys/stream.h>
-#include <sys/stropts.h>
-#include <sys/errno.h>
-#ifdef __osf__
-#include <sys/ioctl.h>
-#include <sys/cmn_err.h>
-#define queclass(mp)	((mp)->b_band & QPCTL)
-#else
-#include <sys/ioccom.h>
-#endif
-#include <sys/time.h>
-#ifdef SVR4
-#include <sys/cmn_err.h>
-#include <sys/conf.h>
-#include <sys/dlpi.h>
-#include <sys/ddi.h>
-#ifdef SOL2
-#include <sys/ksynch.h>
-#include <sys/kstat.h>
-#include <sys/sunddi.h>
-#include <sys/ethernet.h>
-#else
-#include <sys/socket.h>
-#include <sys/sockio.h>
-#include <net/if.h>
-#include <netinet/in.h>
-#endif /* SOL2 */
-#else /* not SVR4 */
-#include <sys/user.h>
-#endif /* SVR4 */
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-/*
- * Modifications marked with #ifdef PRIOQ are for priority queueing of
- * interactive traffic, and are due to Marko Zec <zec@japa.tel.fer.hr>.
- */
-#ifdef PRIOQ
-#endif	/* PRIOQ */
-
-#include <netinet/in.h>	/* leave this outside of PRIOQ for htons */
-
-#ifdef __STDC__
-#define __P(x)	x
-#else
-#define __P(x)	()
-#endif
-
-/*
- * The IP module may use this SAP value for IP packets.
- */
-#ifndef ETHERTYPE_IP
-#define ETHERTYPE_IP	0x800
-#endif
-
-#if !defined(ETHERTYPE_IPV6) 
-#define ETHERTYPE_IPV6	0x86dd
-#endif /* !defined(ETHERTYPE_IPV6) */
-
-#if !defined(ETHERTYPE_ALLSAP) && defined(SOL2)
-#define ETHERTYPE_ALLSAP   0
-#endif /* !defined(ETHERTYPE_ALLSAP) && defined(SOL2) */
-
-#if !defined(PPP_ALLSAP) && defined(SOL2)
-#define PPP_ALLSAP  PPP_ALLSTATIONS
-#endif /* !defined(PPP_ALLSAP) && defined(SOL2) */
-
-extern time_t time;
-
-#ifdef SOL2
-/*
- * We use this reader-writer lock to ensure that the lower streams
- * stay connected to the upper streams while the lower-side put and
- * service procedures are running.  Essentially it is an existence
- * lock for the upper stream associated with each lower stream.
- */
-krwlock_t ppp_lower_lock;
-#define LOCK_LOWER_W	rw_enter(&ppp_lower_lock, RW_WRITER)
-#define LOCK_LOWER_R	rw_enter(&ppp_lower_lock, RW_READER)
-#define TRYLOCK_LOWER_R	rw_tryenter(&ppp_lower_lock, RW_READER)
-#define UNLOCK_LOWER	rw_exit(&ppp_lower_lock)
-
-#define MT_ENTER(x)	mutex_enter(x)
-#define MT_EXIT(x)	mutex_exit(x)
-
-/*
- * Notes on multithreaded implementation for Solaris 2:
- *
- * We use an inner perimeter around each queue pair and an outer
- * perimeter around the whole driver.  The inner perimeter is
- * entered exclusively for all entry points (open, close, put,
- * service).  The outer perimeter is entered exclusively for open
- * and close and shared for put and service.  This is all done for
- * us by the streams framework.
- *
- * I used to think that the perimeters were entered for the lower
- * streams' put and service routines as well as for the upper streams'.
- * Because of problems experienced by people, and after reading the
- * documentation more closely, I now don't think that is true.  So we
- * now use ppp_lower_lock to give us an existence guarantee on the
- * upper stream controlling each lower stream.
- *
- * Shared entry to the outer perimeter protects the existence of all
- * the upper streams and their upperstr_t structures, and guarantees
- * that the following fields of any upperstr_t won't change:
- * nextmn, next, nextppa.  It guarantees that the lowerq field of an
- * upperstr_t won't go from non-zero to zero, that the global `ppas'
- * won't change and that the no lower stream will get unlinked.
- *
- * Shared (reader) access to ppa_lower_lock guarantees that no lower
- * stream will be unlinked and that the lowerq field of all upperstr_t
- * structures won't change.
- */
-
-#else /* SOL2 */
-#define LOCK_LOWER_W	0
-#define LOCK_LOWER_R	0
-#define TRYLOCK_LOWER_R	1
-#define UNLOCK_LOWER	0
-#define MT_ENTER(x)	0
-#define MT_EXIT(x)	0
-
-#endif /* SOL2 */
-
-/*
- * Private information; one per upper stream.
- */
-typedef struct upperstr {
-    minor_t mn;			/* minor device number */
-    struct upperstr *nextmn;	/* next minor device */
-    queue_t *q;			/* read q associated with this upper stream */
-    int flags;			/* flag bits, see below */
-    int state;			/* current DLPI state */
-    int sap;			/* service access point */
-    int req_sap;		/* which SAP the DLPI client requested */
-    struct upperstr *ppa;	/* control stream for our ppa */
-    struct upperstr *next;	/* next stream for this ppa */
-    uint ioc_id;		/* last ioctl ID for this stream */
-    enum NPmode npmode;		/* what to do with packets on this SAP */
-    unsigned char rblocked;	/* flow control has blocked upper read strm */
-	/* N.B. rblocked is only changed by control stream's put/srv procs */
-    /*
-     * There is exactly one control stream for each PPA.
-     * The following fields are only used for control streams.
-     */
-    int ppa_id;
-    queue_t *lowerq;		/* write queue attached below this PPA */
-    struct upperstr *nextppa;	/* next control stream */
-    int mru;
-    int mtu;
-    struct pppstat stats;	/* statistics */
-    time_t last_sent;		/* time last NP packet sent */
-    time_t last_recv;		/* time last NP packet rcvd */
-#ifdef SOL2
-    kmutex_t stats_lock;	/* lock for stats updates */
-    kstat_t *kstats;		/* stats for netstat */
-#endif /* SOL2 */
-#ifdef LACHTCP
-    int ifflags;
-    char ifname[IFNAMSIZ];
-    struct ifstats ifstats;
-#endif /* LACHTCP */
-} upperstr_t;
-
-/* Values for flags */
-#define US_PRIV		1	/* stream was opened by superuser */
-#define US_CONTROL	2	/* stream is a control stream */
-#define US_BLOCKED	4	/* flow ctrl has blocked lower write stream */
-#define US_LASTMOD	8	/* no PPP modules below us */
-#define US_DBGLOG	0x10	/* log various occurrences */
-#define US_RBLOCKED	0x20	/* flow ctrl has blocked upper read stream */
-
-#if defined(SOL2)
-#if DL_CURRENT_VERSION >= 2
-#define US_PROMISC	0x40	/* stream is promiscuous */
-#endif /* DL_CURRENT_VERSION >= 2 */
-#define US_RAWDATA	0x80	/* raw M_DATA, no DLPI header */
-#endif /* defined(SOL2) */
-
-#ifdef PRIOQ
-static u_char max_band=0;
-static u_char def_band=0;
-
-#define IPPORT_DEFAULT		65535
-
-/*
- * Port priority table
- * Highest priority ports are listed first, lowest are listed last.
- * ICMP & packets using unlisted ports will be treated as "default".
- * If IPPORT_DEFAULT is not listed here, "default" packets will be 
- * assigned lowest priority.
- * Each line should be terminated with "0".
- * Line containing only "0" marks the end of the list.
- */
-
-static u_short prioq_table[]= {
-    113, 53, 0,
-    22, 23, 513, 517, 518, 0,
-    514, 21, 79, 111, 0,
-    25, 109, 110, 0,
-    IPPORT_DEFAULT, 0,
-    20, 70, 80, 8001, 8008, 8080, 0, /* 8001,8008,8080 - common proxy ports */
-0 };
-
-#endif	/* PRIOQ */
-
-
-static upperstr_t *minor_devs = NULL;
-static upperstr_t *ppas = NULL;
-
-#ifdef SVR4
-static int pppopen __P((queue_t *, dev_t *, int, int, cred_t *));
-static int pppclose __P((queue_t *, int, cred_t *));
-#else
-static int pppopen __P((queue_t *, int, int, int));
-static int pppclose __P((queue_t *, int));
-#endif /* SVR4 */
-static int pppurput __P((queue_t *, mblk_t *));
-static int pppuwput __P((queue_t *, mblk_t *));
-static int pppursrv __P((queue_t *));
-static int pppuwsrv __P((queue_t *));
-static int ppplrput __P((queue_t *, mblk_t *));
-static int ppplwput __P((queue_t *, mblk_t *));
-static int ppplrsrv __P((queue_t *));
-static int ppplwsrv __P((queue_t *));
-#ifndef NO_DLPI
-static void dlpi_request __P((queue_t *, mblk_t *, upperstr_t *));
-static void dlpi_error __P((queue_t *, upperstr_t *, int, int, int));
-static void dlpi_ok __P((queue_t *, int));
-#endif
-static int send_data __P((mblk_t *, upperstr_t *));
-static void new_ppa __P((queue_t *, mblk_t *));
-static void attach_ppa __P((queue_t *, mblk_t *));
-static void detach_ppa __P((queue_t *, mblk_t *));
-static void detach_lower __P((queue_t *, mblk_t *));
-static void debug_dump __P((queue_t *, mblk_t *));
-static upperstr_t *find_dest __P((upperstr_t *, int));
-#if defined(SOL2)
-static upperstr_t *find_promisc __P((upperstr_t *, int));
-static mblk_t *prepend_ether __P((upperstr_t *, mblk_t *, int));
-static mblk_t *prepend_udind __P((upperstr_t *, mblk_t *, int));
-static void promisc_sendup __P((upperstr_t *, mblk_t *, int, int));
-#endif /* defined(SOL2) */
-static int putctl2 __P((queue_t *, int, int, int));
-static int putctl4 __P((queue_t *, int, int, int));
-static int pass_packet __P((upperstr_t *ppa, mblk_t *mp, int outbound));
-#ifdef FILTER_PACKETS
-static int ip_hard_filter __P((upperstr_t *ppa, mblk_t *mp, int outbound));
-#endif /* FILTER_PACKETS */
-
-#define PPP_ID 0xb1a6
-static struct module_info ppp_info = {
-#ifdef PRIOQ
-    PPP_ID, "ppp", 0, 512, 512, 384
-#else
-    PPP_ID, "ppp", 0, 512, 512, 128
-#endif	/* PRIOQ */
-};
-
-static struct qinit pppurint = {
-    pppurput, pppursrv, pppopen, pppclose, NULL, &ppp_info, NULL
-};
-
-static struct qinit pppuwint = {
-    pppuwput, pppuwsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-static struct qinit ppplrint = {
-    ppplrput, ppplrsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-static struct qinit ppplwint = {
-    ppplwput, ppplwsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-#ifdef LACHTCP
-extern struct ifstats *ifstats;
-int pppdevflag = 0;
-#endif
-
-struct streamtab pppinfo = {
-    &pppurint, &pppuwint,
-    &ppplrint, &ppplwint
-};
-
-int ppp_count;
-
-/*
- * How we maintain statistics.
- */
-#ifdef SOL2
-#define INCR_IPACKETS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[0].value.ul++;	\
-	}
-#define INCR_IERRORS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[1].value.ul++;	\
-	}
-#define INCR_OPACKETS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[2].value.ul++;	\
-	}
-#define INCR_OERRORS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[3].value.ul++;	\
-	}
-#endif
-
-#ifdef LACHTCP
-#define INCR_IPACKETS(ppa)	ppa->ifstats.ifs_ipackets++;
-#define INCR_IERRORS(ppa)	ppa->ifstats.ifs_ierrors++;
-#define INCR_OPACKETS(ppa)	ppa->ifstats.ifs_opackets++;
-#define INCR_OERRORS(ppa)	ppa->ifstats.ifs_oerrors++;
-#endif
-
-/*
- * STREAMS driver entry points.
- */
-static int
-#ifdef SVR4
-pppopen(q, devp, oflag, sflag, credp)
-    queue_t *q;
-    dev_t *devp;
-    int oflag, sflag;
-    cred_t *credp;
-#else
-pppopen(q, dev, oflag, sflag)
-    queue_t *q;
-    int dev;			/* really dev_t */
-    int oflag, sflag;
-#endif
-{
-    upperstr_t *up;
-    upperstr_t **prevp;
-    minor_t mn;
-#ifdef PRIOQ
-    u_short *ptr;
-    u_char new_band;
-#endif	/* PRIOQ */
-
-    if (q->q_ptr)
-	DRV_OPEN_OK(dev);	/* device is already open */
-
-#ifdef PRIOQ
-    /* Calculate max_bband & def_band from definitions in prioq.h
-       This colud be done at some more approtiate time (less often)
-       but this way it works well so I'll just leave it here */
-
-    max_band = 1;
-    def_band = 0;
-    ptr = prioq_table;
-    while (*ptr) {
-        new_band = 1;
-        while (*ptr)
-	    if (*ptr++ == IPPORT_DEFAULT) {
-		new_band = 0;
-		def_band = max_band;
-	    }
-        max_band += new_band;
-        ptr++;
-    }
-    if (def_band)
-        def_band = max_band - def_band;
-    --max_band;
-#endif	/* PRIOQ */
-
-    if (sflag == CLONEOPEN) {
-	mn = 0;
-	for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) {
-	    if (up->mn != mn)
-		break;
-	    ++mn;
-	}
-    } else {
-#ifdef SVR4
-	mn = getminor(*devp);
-#else
-	mn = minor(dev);
-#endif
-	for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) {
-	    if (up->mn >= mn)
-		break;
-	}
-	if (up->mn == mn) {
-	    /* this can't happen */
-	    q->q_ptr = WR(q)->q_ptr = (caddr_t) up;
-	    DRV_OPEN_OK(dev);
-	}
-    }
-
-    /*
-     * Construct a new minor node.
-     */
-    up = (upperstr_t *) ALLOC_SLEEP(sizeof(upperstr_t));
-    bzero((caddr_t) up, sizeof(upperstr_t));
-    if (up == 0) {
-	DPRINT("pppopen: out of kernel memory\n");
-	OPEN_ERROR(ENXIO);
-    }
-    up->nextmn = *prevp;
-    *prevp = up;
-    up->mn = mn;
-#ifdef SVR4
-    *devp = makedevice(getmajor(*devp), mn);
-#endif
-    up->q = q;
-    if (NOTSUSER() == 0)
-	up->flags |= US_PRIV;
-#ifndef NO_DLPI
-    up->state = DL_UNATTACHED;
-#endif
-#ifdef LACHTCP
-    up->ifflags = IFF_UP | IFF_POINTOPOINT;
-#endif
-    up->sap = -1;
-    up->last_sent = up->last_recv = time;
-    up->npmode = NPMODE_DROP;
-    q->q_ptr = (caddr_t) up;
-    WR(q)->q_ptr = (caddr_t) up;
-    noenable(WR(q));
-#ifdef SOL2
-    mutex_init(&up->stats_lock, NULL, MUTEX_DRIVER, NULL);
-#endif
-    ++ppp_count;
-
-    qprocson(q);
-    DRV_OPEN_OK(makedev(major(dev), mn));
-}
-
-static int
-#ifdef SVR4
-pppclose(q, flag, credp)
-    queue_t *q;
-    int flag;
-    cred_t *credp;
-#else
-pppclose(q, flag)
-    queue_t *q;
-    int flag;
-#endif
-{
-    upperstr_t *up, **upp;
-    upperstr_t *as, *asnext;
-    upperstr_t **prevp;
-
-    qprocsoff(q);
-
-    up = (upperstr_t *) q->q_ptr;
-    if (up == 0) {
-	DPRINT("pppclose: q_ptr = 0\n");
-	return 0;
-    }
-    if (up->flags & US_DBGLOG)
-	DPRINT2("ppp/%d: close, flags=%x\n", up->mn, up->flags);
-    if (up->flags & US_CONTROL) {
-#ifdef LACHTCP
-	struct ifstats *ifp, *pifp;
-#endif
-	if (up->lowerq != 0) {
-	    /* Gack! the lower stream should have be unlinked earlier! */
-	    DPRINT1("ppp%d: lower stream still connected on close?\n",
-		    up->mn);
-	    LOCK_LOWER_W;
-	    up->lowerq->q_ptr = 0;
-	    RD(up->lowerq)->q_ptr = 0;
-	    up->lowerq = 0;
-	    UNLOCK_LOWER;
-	}
-
-	/*
-	 * This stream represents a PPA:
-	 * For all streams attached to the PPA, clear their
-	 * references to this PPA.
-	 * Then remove this PPA from the list of PPAs.
-	 */
-	for (as = up->next; as != 0; as = asnext) {
-	    asnext = as->next;
-	    as->next = 0;
-	    as->ppa = 0;
-	    if (as->flags & US_BLOCKED) {
-		as->flags &= ~US_BLOCKED;
-		flushq(WR(as->q), FLUSHDATA);
-	    }
-	}
-	for (upp = &ppas; *upp != 0; upp = &(*upp)->nextppa)
-	    if (*upp == up) {
-		*upp = up->nextppa;
-		break;
-	    }
-#ifdef LACHTCP
-	/* Remove the statistics from the active list.  */
-	for (ifp = ifstats, pifp = 0; ifp; ifp = ifp->ifs_next) {
-	    if (ifp == &up->ifstats) {
-		if (pifp)
-		    pifp->ifs_next = ifp->ifs_next;
-		else
-		    ifstats = ifp->ifs_next;
-		break;
-	    }
-	    pifp = ifp;
-	}
-#endif
-    } else {
-	/*
-	 * If this stream is attached to a PPA,
-	 * remove it from the PPA's list.
-	 */
-	if ((as = up->ppa) != 0) {
-	    for (; as->next != 0; as = as->next)
-		if (as->next == up) {
-		    as->next = up->next;
-		    break;
-		}
-	}
-    }
-
-#ifdef SOL2
-    if (up->kstats)
-	kstat_delete(up->kstats);
-    mutex_destroy(&up->stats_lock);
-#endif
-
-    q->q_ptr = NULL;
-    WR(q)->q_ptr = NULL;
-
-    for (prevp = &minor_devs; *prevp != 0; prevp = &(*prevp)->nextmn) {
-	if (*prevp == up) {
-	    *prevp = up->nextmn;
-	    break;
-	}
-    }
-    FREE(up, sizeof(upperstr_t));
-    --ppp_count;
-
-    return 0;
-}
-
-/*
- * A message from on high.  We do one of three things:
- *	- qreply()
- *	- put the message on the lower write stream
- *	- queue it for our service routine
- */
-static int
-pppuwput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *ppa, *nps;
-    struct iocblk *iop;
-    struct linkblk *lb;
-#ifdef LACHTCP
-    struct ifreq *ifr;
-    int i;
-#endif
-    queue_t *lq;
-    int error, n, sap;
-    mblk_t *mq;
-    struct ppp_idle *pip;
-#ifdef PRIOQ
-    queue_t *tlq;
-#endif	/* PRIOQ */
-#ifdef NO_DLPI
-    upperstr_t *os;
-#endif
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("pppuwput: q_ptr = 0!\n");
-	return 0;
-    }
-    if (mp == 0) {
-	DPRINT1("pppuwput/%d: mp = 0!\n", us->mn);
-	return 0;
-    }
-    if (mp->b_datap == 0) {
-	DPRINT1("pppuwput/%d: mp->b_datap = 0!\n", us->mn);
-	return 0;
-    }
-    switch (mp->b_datap->db_type) {
-#ifndef NO_DLPI
-    case M_PCPROTO:
-    case M_PROTO:
-	dlpi_request(q, mp, us);
-	break;
-#endif /* NO_DLPI */
-
-    case M_DATA:
-	if (us->flags & US_DBGLOG)
-	    DPRINT3("ppp/%d: uwput M_DATA len=%d flags=%x\n",
-		    us->mn, msgdsize(mp), us->flags);
-	if (us->ppa == 0 || msgdsize(mp) > us->ppa->mtu + PPP_HDRLEN
-#ifndef NO_DLPI
-	    || (us->flags & US_CONTROL) == 0
-#endif /* NO_DLPI */
-	    ) {
-	    DPRINT1("pppuwput: junk data len=%d\n", msgdsize(mp));
-	    freemsg(mp);
-	    break;
-	}
-#ifdef NO_DLPI
-	if ((us->flags & US_CONTROL) == 0 && !pass_packet(us, mp, 1))
-	    break;
-#endif
-	if (!send_data(mp, us))
-	    putq(q, mp);
-	break;
-
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	error = EINVAL;
-	if (us->flags & US_DBGLOG)
-	    DPRINT3("ppp/%d: ioctl %x count=%d\n",
-		    us->mn, iop->ioc_cmd, iop->ioc_count);
-	switch (iop->ioc_cmd) {
-#if defined(SOL2)
-	case DLIOCRAW:	    /* raw M_DATA mode */
-	    us->flags |= US_RAWDATA;
-	    error = 0;
-	    break;
-#endif /* defined(SOL2) */
-	case I_LINK:
-	    if ((us->flags & US_CONTROL) == 0 || us->lowerq != 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl I_LINK b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    lb = (struct linkblk *) mp->b_cont->b_rptr;
-	    lq = lb->l_qbot;
-	    if (lq == 0) {
-		DPRINT1("pppuwput/%d: ioctl I_LINK l_qbot = 0!\n", us->mn);
-		break;
-	    }
-	    LOCK_LOWER_W;
-	    us->lowerq = lq;
-	    lq->q_ptr = (caddr_t) q;
-	    RD(lq)->q_ptr = (caddr_t) us->q;
-	    UNLOCK_LOWER;
-	    iop->ioc_count = 0;
-	    error = 0;
-	    us->flags &= ~US_LASTMOD;
-	    /* Unblock upper streams which now feed this lower stream. */
-	    qenable(q);
-	    /* Send useful information down to the modules which
-	       are now linked below us. */
-	    putctl2(lq, M_CTL, PPPCTL_UNIT, us->ppa_id);
-	    putctl4(lq, M_CTL, PPPCTL_MRU, us->mru);
-	    putctl4(lq, M_CTL, PPPCTL_MTU, us->mtu);
-#ifdef PRIOQ
-            /* Lower tty driver's queue hiwat/lowat from default 4096/128
-               to 256/128 since we don't want queueing of data on
-               output to physical device */
-
-            freezestr(lq);
-            for (tlq = lq; tlq->q_next != NULL; tlq = tlq->q_next)
-		;
-            strqset(tlq, QHIWAT, 0, 256);
-            strqset(tlq, QLOWAT, 0, 128);
-            unfreezestr(lq);
-#endif	/* PRIOQ */
-	    break;
-
-	case I_UNLINK:
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl I_UNLINK b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    lb = (struct linkblk *) mp->b_cont->b_rptr;
-#if DEBUG
-	    if (us->lowerq != lb->l_qbot) {
-		DPRINT2("ppp unlink: lowerq=%x qbot=%x\n",
-			us->lowerq, lb->l_qbot);
-		break;
-	    }
-#endif
-	    iop->ioc_count = 0;
-	    qwriter(q, mp, detach_lower, PERIM_OUTER);
-	    error = -1;
-	    break;
-
-	case PPPIO_NEWPPA:
-	    if (us->flags & US_CONTROL)
-		break;
-	    if ((us->flags & US_PRIV) == 0) {
-		error = EPERM;
-		break;
-	    }
-	    /* Arrange to return an int */
-	    if ((mq = mp->b_cont) == 0
-		|| mq->b_datap->db_lim - mq->b_rptr < sizeof(int)) {
-		mq = allocb(sizeof(int), BPRI_HI);
-		if (mq == 0) {
-		    error = ENOSR;
-		    break;
-		}
-		if (mp->b_cont != 0)
-		    freemsg(mp->b_cont);
-		mp->b_cont = mq;
-		mq->b_cont = 0;
-	    }
-	    iop->ioc_count = sizeof(int);
-	    mq->b_wptr = mq->b_rptr + sizeof(int);
-	    qwriter(q, mp, new_ppa, PERIM_OUTER);
-	    error = -1;
-	    break;
-
-	case PPPIO_ATTACH:
-	    /* like dlpi_attach, for programs which can't write to
-	       the stream (like pppstats) */
-	    if (iop->ioc_count != sizeof(int) || us->ppa != 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_ATTACH b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    for (ppa = ppas; ppa != 0; ppa = ppa->nextppa)
-		if (ppa->ppa_id == n)
-		    break;
-	    if (ppa == 0)
-		break;
-	    us->ppa = ppa;
-	    iop->ioc_count = 0;
-	    qwriter(q, mp, attach_ppa, PERIM_OUTER);
-	    error = -1;
-	    break;
-
-#ifdef NO_DLPI
-	case PPPIO_BIND:
-	    /* Attach to a given SAP. */
-	    if (iop->ioc_count != sizeof(int) || us->ppa == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_BIND b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    /* n must be a valid PPP network protocol number. */
-	    if (n < 0x21 || n > 0x3fff || (n & 0x101) != 1)
-		break;
-	    /* check that no other stream is bound to this sap already. */
-	    for (os = us->ppa; os != 0; os = os->next)
-		if (os->sap == n)
-		    break;
-	    if (os != 0)
-		break;
-	    us->sap = n;
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-#endif /* NO_DLPI */
-
-	case PPPIO_MRU:
-	    if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_MRU b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n <= 0 || n > PPP_MAXMRU)
-		break;
-	    if (n < PPP_MRU)
-		n = PPP_MRU;
-	    us->mru = n;
-	    if (us->lowerq)
-		putctl4(us->lowerq, M_CTL, PPPCTL_MRU, n);
-	    error = 0;
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_MTU:
-	    if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_MTU b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n <= 0 || n > PPP_MAXMTU)
-		break;
-	    us->mtu = n;
-#ifdef LACHTCP
-	    /* The MTU reported in netstat, not used as IP max packet size! */
-	    us->ifstats.ifs_mtu = n;
-#endif
-	    if (us->lowerq)
-		putctl4(us->lowerq, M_CTL, PPPCTL_MTU, n);
-	    error = 0;
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_LASTMOD:
-	    us->flags |= US_LASTMOD;
-	    error = 0;
-	    break;
-
-	case PPPIO_DEBUG:
-	    if (iop->ioc_count != sizeof(int))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_DEBUG b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n == PPPDBG_DUMP + PPPDBG_DRIVER) {
-		qwriter(q, NULL, debug_dump, PERIM_OUTER);
-		iop->ioc_count = 0;
-		error = -1;
-	    } else if (n == PPPDBG_LOG + PPPDBG_DRIVER) {
-		DPRINT1("ppp/%d: debug log enabled\n", us->mn);
-		us->flags |= US_DBGLOG;
-		iop->ioc_count = 0;
-		error = 0;
-	    } else {
-		if (us->ppa == 0 || us->ppa->lowerq == 0)
-		    break;
-		putnext(us->ppa->lowerq, mp);
-		error = -1;
-	    }
-	    break;
-
-	case PPPIO_NPMODE:
-	    if (iop->ioc_count != 2 * sizeof(int))
-		break;
-	    if ((us->flags & US_CONTROL) == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_NPMODE b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    sap = ((int *)mp->b_cont->b_rptr)[0];
-	    for (nps = us->next; nps != 0; nps = nps->next) {
-		if (us->flags & US_DBGLOG)
-		    DPRINT2("us = 0x%x, us->next->sap = 0x%x\n", nps, nps->sap);
-		if (nps->sap == sap)
-		    break;
-	    }
-	    if (nps == 0) {
-		if (us->flags & US_DBGLOG)
-		    DPRINT2("ppp/%d: no stream for sap %x\n", us->mn, sap);
-		break;
-	    }
-	    /* XXX possibly should use qwriter here */
-	    nps->npmode = (enum NPmode) ((int *)mp->b_cont->b_rptr)[1];
-	    if (nps->npmode != NPMODE_QUEUE && (nps->flags & US_BLOCKED) != 0)
-		qenable(WR(nps->q));
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case PPPIO_GIDLE:
-	    if ((ppa = us->ppa) == 0)
-		break;
-	    mq = allocb(sizeof(struct ppp_idle), BPRI_HI);
-	    if (mq == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = mq;
-	    mq->b_cont = 0;
-	    pip = (struct ppp_idle *) mq->b_wptr;
-	    pip->xmit_idle = time - ppa->last_sent;
-	    pip->recv_idle = time - ppa->last_recv;
-	    mq->b_wptr += sizeof(struct ppp_idle);
-	    iop->ioc_count = sizeof(struct ppp_idle);
-	    error = 0;
-	    break;
-
-#ifdef LACHTCP
-	case SIOCSIFNAME:
-	    /* Sent from IP down to us.  Attach the ifstats structure.  */
-	    if (iop->ioc_count != sizeof(struct ifreq) || us->ppa == 0)
-	        break;
-	    ifr = (struct ifreq *)mp->b_cont->b_rptr;
-	    /* Find the unit number in the interface name.  */
-	    for (i = 0; i < IFNAMSIZ; i++) {
-		if (ifr->ifr_name[i] == 0 ||
-		    (ifr->ifr_name[i] >= '0' &&
-		     ifr->ifr_name[i] <= '9'))
-		    break;
-		else
-		    us->ifname[i] = ifr->ifr_name[i];
-	    }
-	    us->ifname[i] = 0;
-
-	    /* Convert the unit number to binary.  */
-	    for (n = 0; i < IFNAMSIZ; i++) {
-		if (ifr->ifr_name[i] == 0) {
-		    break;
-		}
-	        else {
-		    n = n * 10 + ifr->ifr_name[i] - '0';
-		}
-	    }
-
-	    /* Verify the ppa.  */
-	    if (us->ppa->ppa_id != n)
-		break;
-	    ppa = us->ppa;
-
-	    /* Set up the netstat block.  */
-	    strncpy (ppa->ifname, us->ifname, IFNAMSIZ);
-
-	    ppa->ifstats.ifs_name = ppa->ifname;
-	    ppa->ifstats.ifs_unit = n;
-	    ppa->ifstats.ifs_active = us->state != DL_UNBOUND;
-	    ppa->ifstats.ifs_mtu = ppa->mtu;
-
-	    /* Link in statistics used by netstat.  */
-	    ppa->ifstats.ifs_next = ifstats;
-	    ifstats = &ppa->ifstats;
-
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case SIOCGIFFLAGS:
-	    if (!(us->flags & US_CONTROL)) {
-		if (us->ppa)
-		    us = us->ppa;
-	        else
-		    break;
-	    }
-	    ((struct iocblk_in *)iop)->ioc_ifflags = us->ifflags;
-	    error = 0;
-	    break;
-
-	case SIOCSIFFLAGS:
-	    if (!(us->flags & US_CONTROL)) {
-		if (us->ppa)
-		    us = us->ppa;
-		else
-		    break;
-	    }
-	    us->ifflags = ((struct iocblk_in *)iop)->ioc_ifflags;
-	    error = 0;
-	    break;
-
-	case SIOCSIFADDR:
-	    if (!(us->flags & US_CONTROL)) {
-		if (us->ppa)
-		    us = us->ppa;
-		else
-		    break;
-	    }
-	    us->ifflags |= IFF_RUNNING;
-	    ((struct iocblk_in *)iop)->ioc_ifflags |= IFF_RUNNING;
-	    error = 0;
-	    break;
-
-	case SIOCSIFMTU:
-	    /*
-	     * Vanilla SVR4 systems don't handle SIOCSIFMTU, rather
-	     * they take the MTU from the DL_INFO_ACK we sent in response
-	     * to their DL_INFO_REQ.  Fortunately, they will update the
-	     * MTU if we send an unsolicited DL_INFO_ACK up.
-	     */
-	    if ((mq = allocb(sizeof(dl_info_req_t), BPRI_HI)) == 0)
-		break;		/* should do bufcall */
-	    ((union DL_primitives *)mq->b_rptr)->dl_primitive = DL_INFO_REQ;
-	    mq->b_wptr = mq->b_rptr + sizeof(dl_info_req_t);
-	    dlpi_request(q, mq, us);
-	    error = 0;
-	    break;
-
-	case SIOCGIFNETMASK:
-	case SIOCSIFNETMASK:
-	case SIOCGIFADDR:
-	case SIOCGIFDSTADDR:
-	case SIOCSIFDSTADDR:
-	case SIOCGIFMETRIC:
-	    error = 0;
-	    break;
-#endif /* LACHTCP */
-
-	default:
-	    if (us->ppa == 0 || us->ppa->lowerq == 0)
-		break;
-	    us->ioc_id = iop->ioc_id;
-	    error = -1;
-	    switch (iop->ioc_cmd) {
-	    case PPPIO_GETSTAT:
-	    case PPPIO_GETCSTAT:
-		if (us->flags & US_LASTMOD) {
-		    error = EINVAL;
-		    break;
-		}
-		putnext(us->ppa->lowerq, mp);
-		break;
-	    default:
-		if (us->flags & US_PRIV)
-		    putnext(us->ppa->lowerq, mp);
-		else {
-		    DPRINT1("ppp ioctl %x rejected\n", iop->ioc_cmd);
-		    error = EPERM;
-		}
-		break;
-	    }
-	    break;
-	}
-
-	if (error > 0) {
-	    iop->ioc_error = error;
-	    mp->b_datap->db_type = M_IOCNAK;
-	    qreply(q, mp);
-	} else if (error == 0) {
-	    mp->b_datap->db_type = M_IOCACK;
-	    qreply(q, mp);
-	}
-	break;
-
-    case M_FLUSH:
-	if (us->flags & US_DBGLOG)
-	    DPRINT2("ppp/%d: flush %x\n", us->mn, *mp->b_rptr);
-	if (*mp->b_rptr & FLUSHW)
-	    flushq(q, FLUSHDATA);
-	if (*mp->b_rptr & FLUSHR) {
-	    *mp->b_rptr &= ~FLUSHW;
-	    qreply(q, mp);
-	} else
-	    freemsg(mp);
-	break;
-
-    default:
-	freemsg(mp);
-	break;
-    }
-    return 0;
-}
-
-#ifndef NO_DLPI
-static void
-dlpi_request(q, mp, us)
-    queue_t *q;
-    mblk_t *mp;
-    upperstr_t *us;
-{
-    union DL_primitives *d = (union DL_primitives *) mp->b_rptr;
-    int size = mp->b_wptr - mp->b_rptr;
-    mblk_t *reply, *np;
-    upperstr_t *ppa, *os;
-    int sap, len;
-    dl_info_ack_t *info;
-    dl_bind_ack_t *ackp;
-#if DL_CURRENT_VERSION >= 2
-    dl_phys_addr_ack_t	*paddrack;
-    static struct ether_addr eaddr = {0};
-#endif
-
-    if (us->flags & US_DBGLOG)
-	DPRINT3("ppp/%d: dlpi prim %x len=%d\n", us->mn,
-		d->dl_primitive, size);
-    switch (d->dl_primitive) {
-    case DL_INFO_REQ:
-	if (size < sizeof(dl_info_req_t))
-	    goto badprim;
-	if ((reply = allocb(sizeof(dl_info_ack_t), BPRI_HI)) == 0)
-	    break;		/* should do bufcall */
-	reply->b_datap->db_type = M_PCPROTO;
-	info = (dl_info_ack_t *) reply->b_wptr;
-	reply->b_wptr += sizeof(dl_info_ack_t);
-	bzero((caddr_t) info, sizeof(dl_info_ack_t));
-	info->dl_primitive = DL_INFO_ACK;
-	info->dl_max_sdu = us->ppa? us->ppa->mtu: PPP_MAXMTU;
-	info->dl_min_sdu = 1;
-	info->dl_addr_length = sizeof(uint);
-	info->dl_mac_type = DL_ETHER;	/* a bigger lie */
-	info->dl_current_state = us->state;
-	info->dl_service_mode = DL_CLDLS;
-	info->dl_provider_style = DL_STYLE2;
-#if DL_CURRENT_VERSION >= 2
-	info->dl_sap_length = sizeof(uint);
-	info->dl_version = DL_CURRENT_VERSION;
-#endif
-	qreply(q, reply);
-	break;
-
-    case DL_ATTACH_REQ:
-	if (size < sizeof(dl_attach_req_t))
-	    goto badprim;
-	if (us->state != DL_UNATTACHED || us->ppa != 0) {
-	    dlpi_error(q, us, DL_ATTACH_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	for (ppa = ppas; ppa != 0; ppa = ppa->nextppa)
-	    if (ppa->ppa_id == d->attach_req.dl_ppa)
-		break;
-	if (ppa == 0) {
-	    dlpi_error(q, us, DL_ATTACH_REQ, DL_BADPPA, 0);
-	    break;
-	}
-	us->ppa = ppa;
-	qwriter(q, mp, attach_ppa, PERIM_OUTER);
-	return;
-
-    case DL_DETACH_REQ:
-	if (size < sizeof(dl_detach_req_t))
-	    goto badprim;
-	if (us->state != DL_UNBOUND || us->ppa == 0) {
-	    dlpi_error(q, us, DL_DETACH_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	qwriter(q, mp, detach_ppa, PERIM_OUTER);
-	return;
-
-    case DL_BIND_REQ:
-	if (size < sizeof(dl_bind_req_t))
-	    goto badprim;
-	if (us->state != DL_UNBOUND || us->ppa == 0) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-#if 0
-	/* apparently this test fails (unnecessarily?) on some systems */
-	if (d->bind_req.dl_service_mode != DL_CLDLS) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_UNSUPPORTED, 0);
-	    break;
-	}
-#endif
-
-	/* saps must be valid PPP network protocol numbers,
-	   except that we accept ETHERTYPE_IP in place of PPP_IP. */
-	sap = d->bind_req.dl_sap;
-	us->req_sap = sap;
-
-#if defined(SOL2)
-	if (us->flags & US_DBGLOG)
-	    DPRINT2("DL_BIND_REQ: ip gives sap = 0x%x, us = 0x%x", sap, us);
-
-	if (sap == ETHERTYPE_IP)	    /* normal IFF_IPV4 */
-	    sap = PPP_IP;
-	else if (sap == ETHERTYPE_IPV6)	    /* when IFF_IPV6 is set */
-	    sap = PPP_IPV6;
-	else if (sap == ETHERTYPE_ALLSAP)   /* snoop gives sap of 0 */
-	    sap = PPP_ALLSAP;
-	else {
-	    DPRINT2("DL_BIND_REQ: unrecognized sap = 0x%x, us = 0x%x", sap, us);
-	    dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
-	    break;
-	}
-#else
-	if (sap == ETHERTYPE_IP)
-	    sap = PPP_IP;
-	if (sap < 0x21 || sap > 0x3fff || (sap & 0x101) != 1) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
-	    break;
-	}
-#endif /* defined(SOL2) */
-
-	/* check that no other stream is bound to this sap already. */
-	for (os = us->ppa; os != 0; os = os->next)
-	    if (os->sap == sap)
-		break;
-	if (os != 0) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_NOADDR, 0);
-	    break;
-	}
-
-	us->sap = sap;
-	us->state = DL_IDLE;
-
-	if ((reply = allocb(sizeof(dl_bind_ack_t) + sizeof(uint),
-			    BPRI_HI)) == 0)
-	    break;		/* should do bufcall */
-	ackp = (dl_bind_ack_t *) reply->b_wptr;
-	reply->b_wptr += sizeof(dl_bind_ack_t) + sizeof(uint);
-	reply->b_datap->db_type = M_PCPROTO;
-	bzero((caddr_t) ackp, sizeof(dl_bind_ack_t));
-	ackp->dl_primitive = DL_BIND_ACK;
-	ackp->dl_sap = sap;
-	ackp->dl_addr_length = sizeof(uint);
-	ackp->dl_addr_offset = sizeof(dl_bind_ack_t);
-	*(uint *)(ackp+1) = sap;
-	qreply(q, reply);
-	break;
-
-    case DL_UNBIND_REQ:
-	if (size < sizeof(dl_unbind_req_t))
-	    goto badprim;
-	if (us->state != DL_IDLE) {
-	    dlpi_error(q, us, DL_UNBIND_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	us->sap = -1;
-	us->state = DL_UNBOUND;
-#ifdef LACHTCP
-	us->ppa->ifstats.ifs_active = 0;
-#endif
-	dlpi_ok(q, DL_UNBIND_REQ);
-	break;
-
-    case DL_UNITDATA_REQ:
-	if (size < sizeof(dl_unitdata_req_t))
-	    goto badprim;
-	if (us->state != DL_IDLE) {
-	    dlpi_error(q, us, DL_UNITDATA_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	if ((ppa = us->ppa) == 0) {
-	    cmn_err(CE_CONT, "ppp: in state dl_idle but ppa == 0?\n");
-	    break;
-	}
-	len = mp->b_cont == 0? 0: msgdsize(mp->b_cont);
-	if (len > ppa->mtu) {
-	    DPRINT2("dlpi data too large (%d > %d)\n", len, ppa->mtu);
-	    break;
-	}
-
-#if defined(SOL2)
-	/*
-	 * Should there be any promiscuous stream(s), send the data
-	 * up for each promiscuous stream that we recognize.
-	 */
-	if (mp->b_cont)
-	    promisc_sendup(ppa, mp->b_cont, us->sap, 0);
-#endif /* defined(SOL2) */
-
-	mp->b_band = 0;
-#ifdef PRIOQ
-        /* Extract s_port & d_port from IP-packet, the code is a bit
-           dirty here, but so am I, too... */
-        if (mp->b_datap->db_type == M_PROTO && us->sap == PPP_IP
-	    && mp->b_cont != 0) {
-	    u_char *bb, *tlh;
-	    int iphlen, len;
-	    u_short *ptr;
-	    u_char band_unset, cur_band, syn;
-	    u_short s_port, d_port;
-
-            bb = mp->b_cont->b_rptr; /* bb points to IP-header*/
-	    len = mp->b_cont->b_wptr - mp->b_cont->b_rptr;
-            syn = 0;
-	    s_port = IPPORT_DEFAULT;
-	    d_port = IPPORT_DEFAULT;
-	    if (len >= 20) {	/* 20 = minimum length of IP header */
-		iphlen = (bb[0] & 0x0f) * 4;
-		tlh = bb + iphlen;
-		len -= iphlen;
-		switch (bb[9]) {
-		case IPPROTO_TCP:
-		    if (len >= 20) {	      /* min length of TCP header */
-			s_port = (tlh[0] << 8) + tlh[1];
-			d_port = (tlh[2] << 8) + tlh[3];
-			syn = tlh[13] & 0x02;
-		    }
-		    break;
-		case IPPROTO_UDP:
-		    if (len >= 8) {	      /* min length of UDP header */
-			s_port = (tlh[0] << 8) + tlh[1];
-			d_port = (tlh[2] << 8) + tlh[3];
-		    }
-		    break;
-		}
-	    }
-
-            /*
-	     * Now calculate b_band for this packet from the
-	     * port-priority table.
-	     */
-            ptr = prioq_table;
-            cur_band = max_band;
-            band_unset = 1;
-            while (*ptr) {
-                while (*ptr && band_unset)
-                    if (s_port == *ptr || d_port == *ptr++) {
-                        mp->b_band = cur_band;
-                        band_unset = 0;
-                        break;
-		    }
-                ptr++;
-                cur_band--;
-	    }
-            if (band_unset)
-		mp->b_band = def_band;
-            /* It may be usable to urge SYN packets a bit */
-            if (syn)
-		mp->b_band++;
-	}
-#endif	/* PRIOQ */
-	/* this assumes PPP_HDRLEN <= sizeof(dl_unitdata_req_t) */
-	if (mp->b_datap->db_ref > 1) {
-	    np = allocb(PPP_HDRLEN, BPRI_HI);
-	    if (np == 0)
-		break;		/* gak! */
-	    np->b_cont = mp->b_cont;
-	    mp->b_cont = 0;
-	    freeb(mp);
-	    mp = np;
-	} else
-	    mp->b_datap->db_type = M_DATA;
-	/* XXX should use dl_dest_addr_offset/length here,
-	   but we would have to translate ETHERTYPE_IP -> PPP_IP */
-	mp->b_wptr = mp->b_rptr + PPP_HDRLEN;
-	mp->b_rptr[0] = PPP_ALLSTATIONS;
-	mp->b_rptr[1] = PPP_UI;
-	mp->b_rptr[2] = us->sap >> 8;
-	mp->b_rptr[3] = us->sap;
-	if (pass_packet(us, mp, 1)) {
-	    if (!send_data(mp, us))
-		putq(q, mp);
-	}
-	return;
-
-#if DL_CURRENT_VERSION >= 2
-    case DL_PHYS_ADDR_REQ:
-	if (size < sizeof(dl_phys_addr_req_t))
-	    goto badprim;
-
-	/*
-	 * Don't check state because ifconfig sends this one down too
-	 */
-
-	if ((reply = allocb(sizeof(dl_phys_addr_ack_t)+ETHERADDRL, 
-			BPRI_HI)) == 0)
-	    break;		/* should do bufcall */
-	reply->b_datap->db_type = M_PCPROTO;
-	paddrack = (dl_phys_addr_ack_t *) reply->b_wptr;
-	reply->b_wptr += sizeof(dl_phys_addr_ack_t);
-	bzero((caddr_t) paddrack, sizeof(dl_phys_addr_ack_t)+ETHERADDRL);
-	paddrack->dl_primitive = DL_PHYS_ADDR_ACK;
-	paddrack->dl_addr_length = ETHERADDRL;
-	paddrack->dl_addr_offset = sizeof(dl_phys_addr_ack_t);
-	bcopy(&eaddr, reply->b_wptr, ETHERADDRL);
-	reply->b_wptr += ETHERADDRL;
-	qreply(q, reply);
-	break;
-
-#if defined(SOL2)
-    case DL_PROMISCON_REQ:
-	if (size < sizeof(dl_promiscon_req_t))
-	    goto badprim;
-	us->flags |= US_PROMISC;
-	dlpi_ok(q, DL_PROMISCON_REQ);
-	break;
-
-    case DL_PROMISCOFF_REQ:
-	if (size < sizeof(dl_promiscoff_req_t))
-	    goto badprim;
-	us->flags &= ~US_PROMISC;
-	dlpi_ok(q, DL_PROMISCOFF_REQ);
-	break;
-#else
-    case DL_PROMISCON_REQ:	    /* fall thru */
-    case DL_PROMISCOFF_REQ:	    /* fall thru */
-#endif /* defined(SOL2) */
-#endif /* DL_CURRENT_VERSION >= 2 */
-
-#if DL_CURRENT_VERSION >= 2
-    case DL_SET_PHYS_ADDR_REQ:
-    case DL_SUBS_BIND_REQ:
-    case DL_SUBS_UNBIND_REQ:
-    case DL_ENABMULTI_REQ:
-    case DL_DISABMULTI_REQ:
-    case DL_XID_REQ:
-    case DL_TEST_REQ:
-    case DL_REPLY_UPDATE_REQ:
-    case DL_REPLY_REQ:
-    case DL_DATA_ACK_REQ:
-#endif
-    case DL_CONNECT_REQ:
-    case DL_TOKEN_REQ:
-	dlpi_error(q, us, d->dl_primitive, DL_NOTSUPPORTED, 0);
-	break;
-
-    case DL_CONNECT_RES:
-    case DL_DISCONNECT_REQ:
-    case DL_RESET_REQ:
-    case DL_RESET_RES:
-	dlpi_error(q, us, d->dl_primitive, DL_OUTSTATE, 0);
-	break;
-
-    case DL_UDQOS_REQ:
-	dlpi_error(q, us, d->dl_primitive, DL_BADQOSTYPE, 0);
-	break;
-
-#if DL_CURRENT_VERSION >= 2
-    case DL_TEST_RES:
-    case DL_XID_RES:
-	break;
-#endif
-
-    default:
-	cmn_err(CE_CONT, "ppp: unknown dlpi prim 0x%x\n", d->dl_primitive);
-	/* fall through */
-    badprim:
-	dlpi_error(q, us, d->dl_primitive, DL_BADPRIM, 0);
-	break;
-    }
-    freemsg(mp);
-}
-
-static void
-dlpi_error(q, us, prim, err, uerr)
-    queue_t *q;
-    upperstr_t *us;
-    int prim, err, uerr;
-{
-    mblk_t *reply;
-    dl_error_ack_t *errp;
-
-    if (us->flags & US_DBGLOG)
-        DPRINT3("ppp/%d: dlpi error, prim=%x, err=%x\n", us->mn, prim, err);
-    reply = allocb(sizeof(dl_error_ack_t), BPRI_HI);
-    if (reply == 0)
-	return;			/* XXX should do bufcall */
-    reply->b_datap->db_type = M_PCPROTO;
-    errp = (dl_error_ack_t *) reply->b_wptr;
-    reply->b_wptr += sizeof(dl_error_ack_t);
-    errp->dl_primitive = DL_ERROR_ACK;
-    errp->dl_error_primitive = prim;
-    errp->dl_errno = err;
-    errp->dl_unix_errno = uerr;
-    qreply(q, reply);
-}
-
-static void
-dlpi_ok(q, prim)
-    queue_t *q;
-    int prim;
-{
-    mblk_t *reply;
-    dl_ok_ack_t *okp;
-
-    reply = allocb(sizeof(dl_ok_ack_t), BPRI_HI);
-    if (reply == 0)
-	return;			/* XXX should do bufcall */
-    reply->b_datap->db_type = M_PCPROTO;
-    okp = (dl_ok_ack_t *) reply->b_wptr;
-    reply->b_wptr += sizeof(dl_ok_ack_t);
-    okp->dl_primitive = DL_OK_ACK;
-    okp->dl_correct_primitive = prim;
-    qreply(q, reply);
-}
-#endif /* NO_DLPI */
-
-static int
-pass_packet(us, mp, outbound)
-    upperstr_t *us;
-    mblk_t *mp;
-    int outbound;
-{
-    int pass;
-    upperstr_t *ppa;
-
-    if ((ppa = us->ppa) == 0) {
-	freemsg(mp);
-	return 0;
-    }
-
-#ifdef FILTER_PACKETS
-    pass = ip_hard_filter(us, mp, outbound);
-#else
-    /*
-     * Here is where we might, in future, decide whether to pass
-     * or drop the packet, and whether it counts as link activity.
-     */
-    pass = 1;
-#endif /* FILTER_PACKETS */
-
-    if (pass < 0) {
-	/* pass only if link already up, and don't update time */
-	if (ppa->lowerq == 0) {
-	    freemsg(mp);
-	    return 0;
-	}
-	pass = 1;
-    } else if (pass) {
-	if (outbound)
-	    ppa->last_sent = time;
-	else
-	    ppa->last_recv = time;
-    }
-
-    return pass;
-}
-
-/*
- * We have some data to send down to the lower stream (or up the
- * control stream, if we don't have a lower stream attached).
- * Returns 1 if the message was dealt with, 0 if it wasn't able
- * to be sent on and should therefore be queued up.
- */
-static int
-send_data(mp, us)
-    mblk_t *mp;
-    upperstr_t *us;
-{
-    upperstr_t *ppa;
-
-    if ((us->flags & US_BLOCKED) || us->npmode == NPMODE_QUEUE)
-	return 0;
-    ppa = us->ppa;
-    if (ppa == 0 || us->npmode == NPMODE_DROP || us->npmode == NPMODE_ERROR) {
-	if (us->flags & US_DBGLOG)
-	    DPRINT2("ppp/%d: dropping pkt (npmode=%d)\n", us->mn, us->npmode);
-	freemsg(mp);
-	return 1;
-    }
-    if (ppa->lowerq == 0) {
-	/* try to send it up the control stream */
-        if (bcanputnext(ppa->q, mp->b_band)) {
-	    /*
-	     * The message seems to get corrupted for some reason if
-	     * we just send the message up as it is, so we send a copy.
-	     */
-	    mblk_t *np = copymsg(mp);
-	    freemsg(mp);
-	    if (np != 0)
-		putnext(ppa->q, np);
-	    return 1;
-	}
-    } else {
-        if (bcanputnext(ppa->lowerq, mp->b_band)) {
-	    MT_ENTER(&ppa->stats_lock);
-	    ppa->stats.ppp_opackets++;
-	    ppa->stats.ppp_obytes += msgdsize(mp);
-#ifdef INCR_OPACKETS
-	    INCR_OPACKETS(ppa);
-#endif
-	    MT_EXIT(&ppa->stats_lock);
-	    /*
-	     * The lower queue is only ever detached while holding an
-	     * exclusive lock on the whole driver.  So we can be confident
-	     * that the lower queue is still there.
-	     */
-	    putnext(ppa->lowerq, mp);
-	    return 1;
-	}
-    }
-    us->flags |= US_BLOCKED;
-    return 0;
-}
-
-/*
- * Allocate a new PPA id and link this stream into the list of PPAs.
- * This procedure is called with an exclusive lock on all queues in
- * this driver.
- */
-static void
-new_ppa(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *up, **usp;
-    int ppa_id;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("new_ppa: q_ptr = 0!\n");
-	return;
-    }
-
-    usp = &ppas;
-    ppa_id = 0;
-    while ((up = *usp) != 0 && ppa_id == up->ppa_id) {
-	++ppa_id;
-	usp = &up->nextppa;
-    }
-    us->ppa_id = ppa_id;
-    us->ppa = us;
-    us->next = 0;
-    us->nextppa = *usp;
-    *usp = us;
-    us->flags |= US_CONTROL;
-    us->npmode = NPMODE_PASS;
-
-    us->mtu = PPP_MTU;
-    us->mru = PPP_MRU;
-
-#ifdef SOL2
-    /*
-     * Create a kstats record for our statistics, so netstat -i works.
-     */
-    if (us->kstats == 0) {
-	char unit[32];
-
-	sprintf(unit, "ppp%d", us->ppa->ppa_id);
-	us->kstats = kstat_create("ppp", us->ppa->ppa_id, unit,
-				  "net", KSTAT_TYPE_NAMED, 4, 0);
-	if (us->kstats != 0) {
-	    kstat_named_t *kn = KSTAT_NAMED_PTR(us->kstats);
-
-	    strcpy(kn[0].name, "ipackets");
-	    kn[0].data_type = KSTAT_DATA_ULONG;
-	    strcpy(kn[1].name, "ierrors");
-	    kn[1].data_type = KSTAT_DATA_ULONG;
-	    strcpy(kn[2].name, "opackets");
-	    kn[2].data_type = KSTAT_DATA_ULONG;
-	    strcpy(kn[3].name, "oerrors");
-	    kn[3].data_type = KSTAT_DATA_ULONG;
-	    kstat_install(us->kstats);
-	}
-    }
-#endif /* SOL2 */
-
-    *(int *)mp->b_cont->b_rptr = ppa_id;
-    mp->b_datap->db_type = M_IOCACK;
-    qreply(q, mp);
-}
-
-static void
-attach_ppa(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *t;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("attach_ppa: q_ptr = 0!\n");
-	return;
-    }
-
-#ifndef NO_DLPI
-    us->state = DL_UNBOUND;
-#endif
-    for (t = us->ppa; t->next != 0; t = t->next)
-	;
-    t->next = us;
-    us->next = 0;
-    if (mp->b_datap->db_type == M_IOCTL) {
-	mp->b_datap->db_type = M_IOCACK;
-	qreply(q, mp);
-    } else {
-#ifndef NO_DLPI
-	dlpi_ok(q, DL_ATTACH_REQ);
-#endif
-    }
-}
-
-static void
-detach_ppa(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *t;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("detach_ppa: q_ptr = 0!\n");
-	return;
-    }
-
-    for (t = us->ppa; t->next != 0; t = t->next)
-	if (t->next == us) {
-	    t->next = us->next;
-	    break;
-	}
-    us->next = 0;
-    us->ppa = 0;
-#ifndef NO_DLPI
-    us->state = DL_UNATTACHED;
-    dlpi_ok(q, DL_DETACH_REQ);
-#endif
-}
-
-/*
- * We call this with qwriter in order to give the upper queue procedures
- * the guarantee that the lower queue is not going to go away while
- * they are executing.
- */
-static void
-detach_lower(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("detach_lower: q_ptr = 0!\n");
-	return;
-    }
-
-    LOCK_LOWER_W;
-    us->lowerq->q_ptr = 0;
-    RD(us->lowerq)->q_ptr = 0;
-    us->lowerq = 0;
-    UNLOCK_LOWER;
-
-    /* Unblock streams which now feed back up the control stream. */
-    qenable(us->q);
-
-    mp->b_datap->db_type = M_IOCACK;
-    qreply(q, mp);
-}
-
-static int
-pppuwsrv(q)
-    queue_t *q;
-{
-    upperstr_t *us, *as;
-    mblk_t *mp;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("pppuwsrv: q_ptr = 0!\n");
-	return 0;
-    }
-
-    /*
-     * If this is a control stream, then this service procedure
-     * probably got enabled because of flow control in the lower
-     * stream being enabled (or because of the lower stream going
-     * away).  Therefore we enable the service procedure of all
-     * attached upper streams.
-     */
-    if (us->flags & US_CONTROL) {
-	for (as = us->next; as != 0; as = as->next)
-	    qenable(WR(as->q));
-    }
-
-    /* Try to send on any data queued here. */
-    us->flags &= ~US_BLOCKED;
-    while ((mp = getq(q)) != 0) {
-	if (!send_data(mp, us)) {
-	    putbq(q, mp);
-	    break;
-	}
-    }
-
-    return 0;
-}
-
-/* should never get called... */
-static int
-ppplwput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    putnext(q, mp);
-    return 0;
-}
-
-static int
-ppplwsrv(q)
-    queue_t *q;
-{
-    queue_t *uq;
-
-    /*
-     * Flow control has back-enabled this stream:
-     * enable the upper write service procedure for
-     * the upper control stream for this lower stream.
-     */
-    LOCK_LOWER_R;
-    uq = (queue_t *) q->q_ptr;
-    if (uq != 0)
-	qenable(uq);
-    UNLOCK_LOWER;
-    return 0;
-}
-
-/*
- * This should only get called for control streams.
- */
-static int
-pppurput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *ppa, *us;
-    int proto, len;
-    struct iocblk *iop;
-
-    ppa = (upperstr_t *) q->q_ptr;
-    if (ppa == 0) {
-	DPRINT("pppurput: q_ptr = 0!\n");
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-    case M_CTL:
-	MT_ENTER(&ppa->stats_lock);
-	switch (*mp->b_rptr) {
-	case PPPCTL_IERROR:
-#ifdef INCR_IERRORS
-	    INCR_IERRORS(ppa);
-#endif
-	    ppa->stats.ppp_ierrors++;
-	    break;
-	case PPPCTL_OERROR:
-#ifdef INCR_OERRORS
-	    INCR_OERRORS(ppa);
-#endif
-	    ppa->stats.ppp_oerrors++;
-	    break;
-	}
-	MT_EXIT(&ppa->stats_lock);
-	freemsg(mp);
-	break;
-
-    case M_IOCACK:
-    case M_IOCNAK:
-	/*
-	 * Attempt to match up the response with the stream
-	 * that the request came from.
-	 */
-	iop = (struct iocblk *) mp->b_rptr;
-	for (us = ppa; us != 0; us = us->next)
-	    if (us->ioc_id == iop->ioc_id)
-		break;
-	if (us == 0)
-	    freemsg(mp);
-	else
-	    putnext(us->q, mp);
-	break;
-
-    case M_HANGUP:
-	/*
-	 * The serial device has hung up.  We don't want to send
-	 * the M_HANGUP message up to pppd because that will stop
-	 * us from using the control stream any more.  Instead we
-	 * send a zero-length message as an end-of-file indication.
-	 */
-	freemsg(mp);
-	mp = allocb(1, BPRI_HI);
-	if (mp == 0) {
-	    DPRINT1("ppp/%d: couldn't allocate eof message!\n", ppa->mn);
-	    break;
-	}
-	putnext(ppa->q, mp);
-	break;
-
-    default:
-	if (mp->b_datap->db_type == M_DATA) {
-	    len = msgdsize(mp);
-	    if (mp->b_wptr - mp->b_rptr < PPP_HDRLEN) {
-		PULLUP(mp, PPP_HDRLEN);
-		if (mp == 0) {
-		    DPRINT1("ppp_urput: msgpullup failed (len=%d)\n", len);
-		    break;
-		}
-	    }
-	    MT_ENTER(&ppa->stats_lock);
-	    ppa->stats.ppp_ipackets++;
-	    ppa->stats.ppp_ibytes += len;
-#ifdef INCR_IPACKETS
-	    INCR_IPACKETS(ppa);
-#endif
-	    MT_EXIT(&ppa->stats_lock);
-
-	    proto = PPP_PROTOCOL(mp->b_rptr);
-
-#if defined(SOL2)
-	    /*
-	     * Should there be any promiscuous stream(s), send the data
-	     * up for each promiscuous stream that we recognize.
-	     */
-	    promisc_sendup(ppa, mp, proto, 1);
-#endif /* defined(SOL2) */
-
-	    if (proto < 0x8000 && (us = find_dest(ppa, proto)) != 0) {
-		/*
-		 * A data packet for some network protocol.
-		 * Queue it on the upper stream for that protocol.
-		 * XXX could we just putnext it?  (would require thought)
-		 * The rblocked flag is there to ensure that we keep
-		 * messages in order for each network protocol.
-		 */
-		if (!pass_packet(us, mp, 0))
-		    break;
-		if (!us->rblocked && !canput(us->q))
-		    us->rblocked = 1;
-		if (!us->rblocked)
-		    putq(us->q, mp);
-		else
-		    putq(q, mp);
-		break;
-	    }
-	}
-	/*
-	 * A control frame, a frame for an unknown protocol,
-	 * or some other message type.
-	 * Send it up to pppd via the control stream.
-	 */
-	if (queclass(mp) == QPCTL || canputnext(ppa->q))
-	    putnext(ppa->q, mp);
-	else
-	    putq(q, mp);
-	break;
-    }
-
-    return 0;
-}
-
-static int
-pppursrv(q)
-    queue_t *q;
-{
-    upperstr_t *us, *as;
-    mblk_t *mp, *hdr;
-#ifndef NO_DLPI
-    dl_unitdata_ind_t *ud;
-#endif
-    int proto;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("pppursrv: q_ptr = 0!\n");
-	return 0;
-    }
-
-    if (us->flags & US_CONTROL) {
-	/*
-	 * A control stream.
-	 * If there is no lower queue attached, run the write service
-	 * routines of other upper streams attached to this PPA.
-	 */
-	if (us->lowerq == 0) {
-	    as = us;
-	    do {
-		if (as->flags & US_BLOCKED)
-		    qenable(WR(as->q));
-		as = as->next;
-	    } while (as != 0);
-	}
-
-	/*
-	 * Messages get queued on this stream's read queue if they
-	 * can't be queued on the read queue of the attached stream
-	 * that they are destined for.  This is for flow control -
-	 * when this queue fills up, the lower read put procedure will
-	 * queue messages there and the flow control will propagate
-	 * down from there.
-	 */
-	while ((mp = getq(q)) != 0) {
-	    proto = PPP_PROTOCOL(mp->b_rptr);
-	    if (proto < 0x8000 && (as = find_dest(us, proto)) != 0) {
-		if (!canput(as->q))
-		    break;
-		putq(as->q, mp);
-	    } else {
-		if (!canputnext(q))
-		    break;
-		putnext(q, mp);
-	    }
-	}
-	if (mp) {
-	    putbq(q, mp);
-	} else {
-	    /* can now put stuff directly on network protocol streams again */
-	    for (as = us->next; as != 0; as = as->next)
-		as->rblocked = 0;
-	}
-
-	/*
-	 * If this stream has a lower stream attached,
-	 * enable the read queue's service routine.
-	 * XXX we should really only do this if the queue length
-	 * has dropped below the low-water mark.
-	 */
-	if (us->lowerq != 0)
-	    qenable(RD(us->lowerq));
-		
-    } else {
-	/*
-	 * A network protocol stream.  Put a DLPI header on each
-	 * packet and send it on.
-	 * (Actually, it seems that the IP module will happily
-	 * accept M_DATA messages without the DL_UNITDATA_IND header.)
-	 */
-	while ((mp = getq(q)) != 0) {
-	    if (!canputnext(q)) {
-		putbq(q, mp);
-		break;
-	    }
-#ifndef NO_DLPI
-	    proto = PPP_PROTOCOL(mp->b_rptr);
-	    mp->b_rptr += PPP_HDRLEN;
-	    hdr = allocb(sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint),
-			 BPRI_MED);
-	    if (hdr == 0) {
-		/* XXX should put it back and use bufcall */
-		freemsg(mp);
-		continue;
-	    }
-	    hdr->b_datap->db_type = M_PROTO;
-	    ud = (dl_unitdata_ind_t *) hdr->b_wptr;
-	    hdr->b_wptr += sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint);
-	    hdr->b_cont = mp;
-	    ud->dl_primitive = DL_UNITDATA_IND;
-	    ud->dl_dest_addr_length = sizeof(uint);
-	    ud->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t);
-	    ud->dl_src_addr_length = sizeof(uint);
-	    ud->dl_src_addr_offset = ud->dl_dest_addr_offset + sizeof(uint);
-#if DL_CURRENT_VERSION >= 2
-	    ud->dl_group_address = 0;
-#endif
-	    /* Send the DLPI client the data with the SAP they requested,
-	       (e.g. ETHERTYPE_IP) rather than the PPP protocol number
-	       (e.g. PPP_IP) */
-	    ((uint *)(ud + 1))[0] = us->req_sap;	/* dest SAP */
-	    ((uint *)(ud + 1))[1] = us->req_sap;	/* src SAP */
-	    putnext(q, hdr);
-#else /* NO_DLPI */
-	    putnext(q, mp);
-#endif /* NO_DLPI */
-	}
-	/*
-	 * Now that we have consumed some packets from this queue,
-	 * enable the control stream's read service routine so that we
-	 * can process any packets for us that might have got queued
-	 * there for flow control reasons.
-	 */
-	if (us->ppa)
-	    qenable(us->ppa->q);
-    }
-
-    return 0;
-}
-
-static upperstr_t *
-find_dest(ppa, proto)
-    upperstr_t *ppa;
-    int proto;
-{
-    upperstr_t *us;
-
-    for (us = ppa->next; us != 0; us = us->next)
-	if (proto == us->sap)
-	    break;
-    return us;
-}
-
-#if defined (SOL2)
-/*
- * Test upstream promiscuous conditions. As of now, only pass IPv4 and
- * Ipv6 packets upstream (let PPP packets be decoded elsewhere).
- */
-static upperstr_t *
-find_promisc(us, proto)
-    upperstr_t *us;
-    int proto;
-{
-
-    if ((proto != PPP_IP) && (proto != PPP_IPV6))
-	return (upperstr_t *)0;
-
-    for ( ; us; us = us->next) {
-	if ((us->flags & US_PROMISC) && (us->state == DL_IDLE))
-	    return us;
-    }
-
-    return (upperstr_t *)0;
-}
-
-/*
- * Prepend an empty Ethernet header to msg for snoop, et al.
- */
-static mblk_t *
-prepend_ether(us, mp, proto)
-    upperstr_t *us;
-    mblk_t *mp;
-    int proto;
-{
-    mblk_t *eh;
-    int type;
-
-    if ((eh = allocb(sizeof(struct ether_header), BPRI_HI)) == 0) {
-	freemsg(mp);
-	return (mblk_t *)0;
-    }
-
-    if (proto == PPP_IP)
-	type = ETHERTYPE_IP;
-    else if (proto == PPP_IPV6)
-	type = ETHERTYPE_IPV6;
-    else 
-	type = proto;	    /* What else? Let decoder decide */
-
-    eh->b_wptr += sizeof(struct ether_header);
-    bzero((caddr_t)eh->b_rptr, sizeof(struct ether_header));
-    ((struct ether_header *)eh->b_rptr)->ether_type = htons((short)type);
-    eh->b_cont = mp;
-    return (eh);
-}
-
-/*
- * Prepend DL_UNITDATA_IND mblk to msg
- */
-static mblk_t *
-prepend_udind(us, mp, proto)
-    upperstr_t *us;
-    mblk_t *mp;
-    int proto;
-{
-    dl_unitdata_ind_t *dlu;
-    mblk_t *dh;
-    size_t size;
-
-    size = sizeof(dl_unitdata_ind_t);
-    if ((dh = allocb(size, BPRI_MED)) == 0) {
-	freemsg(mp);
-	return (mblk_t *)0;
-    }
-
-    dh->b_datap->db_type = M_PROTO;
-    dh->b_wptr = dh->b_datap->db_lim;
-    dh->b_rptr = dh->b_wptr - size;
-
-    dlu = (dl_unitdata_ind_t *)dh->b_rptr;
-    dlu->dl_primitive = DL_UNITDATA_IND;
-    dlu->dl_dest_addr_length = 0;
-    dlu->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t);
-    dlu->dl_src_addr_length = 0;
-    dlu->dl_src_addr_offset = sizeof(dl_unitdata_ind_t);
-    dlu->dl_group_address = 0;
-
-    dh->b_cont = mp;
-    return (dh);
-}
-
-/*
- * For any recognized promiscuous streams, send data upstream
- */
-static void
-promisc_sendup(ppa, mp, proto, skip)
-    upperstr_t *ppa;
-    mblk_t *mp;
-    int proto, skip;
-{
-    mblk_t *dup_mp, *dup_dup_mp;
-    upperstr_t *prus, *nprus;
-
-    if ((prus = find_promisc(ppa, proto)) != 0) {
-	if (dup_mp = dupmsg(mp)) {
-
-	    if (skip)
-		dup_mp->b_rptr += PPP_HDRLEN;
-
-	    for ( ; nprus = find_promisc(prus->next, proto); 
-		    prus = nprus) {
-
-		if (dup_dup_mp = dupmsg(dup_mp)) {
-		    if (canputnext(prus->q)) {
-			if (prus->flags & US_RAWDATA) {
-			    dup_dup_mp = prepend_ether(prus, dup_dup_mp, proto);
-			    putnext(prus->q, dup_dup_mp);
-			} else {
-			    dup_dup_mp = prepend_udind(prus, dup_dup_mp, proto);
-			    putnext(prus->q, dup_dup_mp);
-			}
-		    } else {
-			DPRINT("ppp_urput: data to promisc q dropped\n");
-			freemsg(dup_dup_mp);
-		    }
-		}
-	    }
-
-	    if (canputnext(prus->q)) {
-		if (prus->flags & US_RAWDATA) {
-		    dup_mp = prepend_ether(prus, dup_mp, proto);
-		    putnext(prus->q, dup_mp);
-		} else {
-		    dup_mp = prepend_udind(prus, dup_mp, proto);
-		    putnext(prus->q, dup_mp);
-		}
-	    } else {
-		DPRINT("ppp_urput: data to promisc q dropped\n");
-		freemsg(dup_mp);
-	    }
-	}
-    }
-}
-#endif /* defined(SOL2) */
-
-/*
- * We simply put the message on to the associated upper control stream
- * (either here or in ppplrsrv).  That way we enter the perimeters
- * before looking through the list of attached streams to decide which
- * stream it should go up.
- */
-static int
-ppplrput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    queue_t *uq;
-    struct iocblk *iop;
-
-    switch (mp->b_datap->db_type) {
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	iop->ioc_error = EINVAL;
-	mp->b_datap->db_type = M_IOCNAK;
-	qreply(q, mp);
-	return 0;
-    case M_FLUSH:
-	if (*mp->b_rptr & FLUSHR)
-	    flushq(q, FLUSHDATA);
-	if (*mp->b_rptr & FLUSHW) {
-	    *mp->b_rptr &= ~FLUSHR;
-	    qreply(q, mp);
-	} else
-	    freemsg(mp);
-	return 0;
-    }
-
-    /*
-     * If we can't get the lower lock straight away, queue this one
-     * rather than blocking, to avoid the possibility of deadlock.
-     */
-    if (!TRYLOCK_LOWER_R) {
-	putq(q, mp);
-	return 0;
-    }
-
-    /*
-     * Check that we're still connected to the driver.
-     */
-    uq = (queue_t *) q->q_ptr;
-    if (uq == 0) {
-	UNLOCK_LOWER;
-	DPRINT1("ppplrput: q = %x, uq = 0??\n", q);
-	freemsg(mp);
-	return 0;
-    }
-
-    /*
-     * Try to forward the message to the put routine for the upper
-     * control stream for this lower stream.
-     * If there are already messages queued here, queue this one so
-     * they don't get out of order.
-     */
-    if (queclass(mp) == QPCTL || (qsize(q) == 0 && canput(uq)))
-	put(uq, mp);
-    else
-	putq(q, mp);
-
-    UNLOCK_LOWER;
-    return 0;
-}
-
-static int
-ppplrsrv(q)
-    queue_t *q;
-{
-    mblk_t *mp;
-    queue_t *uq;
-
-    /*
-     * Packets get queued here for flow control reasons
-     * or if the lrput routine couldn't get the lower lock
-     * without blocking.
-     */
-    LOCK_LOWER_R;
-    uq = (queue_t *) q->q_ptr;
-    if (uq == 0) {
-	UNLOCK_LOWER;
-	flushq(q, FLUSHALL);
-	DPRINT1("ppplrsrv: q = %x, uq = 0??\n", q);
-	return 0;
-    }
-    while ((mp = getq(q)) != 0) {
-	if (queclass(mp) == QPCTL || canput(uq))
-	    put(uq, mp);
-	else {
-	    putbq(q, mp);
-	    break;
-	}
-    }
-    UNLOCK_LOWER;
-    return 0;
-}
-
-static int
-putctl2(q, type, code, val)
-    queue_t *q;
-    int type, code, val;
-{
-    mblk_t *mp;
-
-    mp = allocb(2, BPRI_HI);
-    if (mp == 0)
-	return 0;
-    mp->b_datap->db_type = type;
-    mp->b_wptr[0] = code;
-    mp->b_wptr[1] = val;
-    mp->b_wptr += 2;
-    putnext(q, mp);
-    return 1;
-}
-
-static int
-putctl4(q, type, code, val)
-    queue_t *q;
-    int type, code, val;
-{
-    mblk_t *mp;
-
-    mp = allocb(4, BPRI_HI);
-    if (mp == 0)
-	return 0;
-    mp->b_datap->db_type = type;
-    mp->b_wptr[0] = code;
-    ((short *)mp->b_wptr)[1] = val;
-    mp->b_wptr += 4;
-    putnext(q, mp);
-    return 1;
-}
-
-static void
-debug_dump(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us;
-    queue_t *uq, *lq;
-
-    DPRINT("ppp upper streams:\n");
-    for (us = minor_devs; us != 0; us = us->nextmn) {
-	uq = us->q;
-	DPRINT3(" %d: q=%x rlev=%d",
-		us->mn, uq, (uq? qsize(uq): 0));
-	DPRINT3(" wlev=%d flags=0x%b", (uq? qsize(WR(uq)): 0),
-		us->flags, "\020\1priv\2control\3blocked\4last");
-	DPRINT3(" state=%x sap=%x req_sap=%x", us->state, us->sap,
-		us->req_sap);
-	if (us->ppa == 0)
-	    DPRINT(" ppa=?\n");
-	else
-	    DPRINT1(" ppa=%d\n", us->ppa->ppa_id);
-	if (us->flags & US_CONTROL) {
-	    lq = us->lowerq;
-	    DPRINT3("    control for %d lq=%x rlev=%d",
-		    us->ppa_id, lq, (lq? qsize(RD(lq)): 0));
-	    DPRINT3(" wlev=%d mru=%d mtu=%d\n",
-		    (lq? qsize(lq): 0), us->mru, us->mtu);
-	}
-    }
-    mp->b_datap->db_type = M_IOCACK;
-    qreply(q, mp);
-}
-
-#ifdef FILTER_PACKETS
-#include <netinet/in_systm.h>
-#include <netinet/ip.h>
-#include <netinet/udp.h>
-#include <netinet/tcp.h>
-
-#define MAX_IPHDR    128     /* max TCP/IP header size */
-
-
-/* The following table contains a hard-coded list of protocol/port pairs.
- * Any matching packets are either discarded unconditionally, or, 
- * if ok_if_link_up is non-zero when a connection does not currently exist
- * (i.e., they go through if the connection is present, but never initiate
- * a dial-out).
- * This idea came from a post by dm@garage.uun.org (David Mazieres)
- */
-static struct pktfilt_tab { 
-	int proto; 
-	u_short port; 
-	u_short ok_if_link_up; 
-} pktfilt_tab[] = {
-	{ IPPROTO_UDP,	520,	1 },	/* RIP, ok to pass if link is up */
-	{ IPPROTO_UDP,	123,	1 },	/* NTP, don't keep up the link for it */
-	{ -1, 		0,	0 }	/* terminator entry has port == -1 */
-};
-
-
-static int
-ip_hard_filter(us, mp, outbound)
-    upperstr_t *us;
-    mblk_t *mp;
-    int outbound;
-{
-    struct ip *ip;
-    struct pktfilt_tab *pft;
-    mblk_t *temp_mp;
-    int proto;
-    int len, hlen;
-
-
-    /* Note, the PPP header has already been pulled up in all cases */
-    proto = PPP_PROTOCOL(mp->b_rptr);
-    if (us->flags & US_DBGLOG)
-        DPRINT3("ppp/%d: filter, proto=0x%x, out=%d\n", us->mn, proto, outbound);
-
-    switch (proto)
-    {
-    case PPP_IP:
-	if ((mp->b_wptr - mp->b_rptr) == PPP_HDRLEN && mp->b_cont != 0) {
-	    temp_mp = mp->b_cont;
-    	    len = msgdsize(temp_mp);
-	    hlen = (len < MAX_IPHDR) ? len : MAX_IPHDR;
-	    PULLUP(temp_mp, hlen);
-	    if (temp_mp == 0) {
-		DPRINT2("ppp/%d: filter, pullup next failed, len=%d\n", 
-			us->mn, hlen);
-		mp->b_cont = 0;		/* PULLUP() freed the rest */
-	        freemsg(mp);
-	        return 0;
-	    }
-	    ip = (struct ip *)mp->b_cont->b_rptr;
-	}
-	else {
-	    len = msgdsize(mp);
-	    hlen = (len < (PPP_HDRLEN+MAX_IPHDR)) ? len : (PPP_HDRLEN+MAX_IPHDR);
-	    PULLUP(mp, hlen);
-	    if (mp == 0) {
-		DPRINT2("ppp/%d: filter, pullup failed, len=%d\n", 
-			us->mn, hlen);
-	        return 0;
-	    }
-	    ip = (struct ip *)(mp->b_rptr + PPP_HDRLEN);
-	}
-
-	/* For IP traffic, certain packets (e.g., RIP) may be either
-	 *   1.  ignored - dropped completely
-	 *   2.  will not initiate a connection, but
-	 *       will be passed if a connection is currently up.
-	 */
-	for (pft=pktfilt_tab; pft->proto != -1; pft++) {
-	    if (ip->ip_p == pft->proto) {
-		switch(pft->proto) {
-		case IPPROTO_UDP:
-		    if (((struct udphdr *) &((int *)ip)[ip->ip_hl])->uh_dport
-				== htons(pft->port)) goto endfor;
-		    break;
-		case IPPROTO_TCP:
-		    if (((struct tcphdr *) &((int *)ip)[ip->ip_hl])->th_dport
-				== htons(pft->port)) goto endfor;
-		    break;
-		}	
-	    }
-	}
-	endfor:
-	if (pft->proto != -1) {
-	    if (us->flags & US_DBGLOG)
-		DPRINT3("ppp/%d: found IP pkt, proto=0x%x (%d)\n", 
-				us->mn, pft->proto, pft->port);
-	    /* Discard if not connected, or if not pass_with_link_up */
-	    /* else, if link is up let go by, but don't update time */
-	    return pft->ok_if_link_up? -1: 0;
-	}
-        break;
-    } /* end switch (proto) */
-
-    return 1;
-}
-#endif /* FILTER_PACKETS */
-
diff --git a/mdk-stage1/ppp/solaris/ppp.conf b/mdk-stage1/ppp/solaris/ppp.conf
deleted file mode 100644
index e443a7aac..000000000
--- a/mdk-stage1/ppp/solaris/ppp.conf
+++ /dev/null
@@ -1 +0,0 @@
-name="ppp" parent="pseudo" instance=0;
diff --git a/mdk-stage1/ppp/solaris/ppp_ahdlc.c b/mdk-stage1/ppp/solaris/ppp_ahdlc.c
deleted file mode 100644
index d0b961258..000000000
--- a/mdk-stage1/ppp/solaris/ppp_ahdlc.c
+++ /dev/null
@@ -1,878 +0,0 @@
-/*
- * ppp_ahdlc.c - STREAMS module for doing PPP asynchronous HDLC.
- *
- * Re-written by Adi Masputra <adi.masputra@sun.com>, based on 
- * the original ppp_ahdlc.c
- *
- * Copyright (c) 2000 by Sun Microsystems, Inc.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  
- *
- * SUN MAKES NO REPRESENTATION OR WARRANTIES ABOUT THE SUITABILITY OF
- * THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
- * TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
- * PARTICULAR PURPOSE, OR NON-INFRINGEMENT.  SUN SHALL NOT BE LIABLE FOR
- * ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR
- * DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2, SVR4, SunOS 4, and Digital UNIX.
- */
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stream.h>
-#include <sys/errno.h>
-
-#ifdef SVR4
-#include <sys/conf.h>
-#include <sys/kmem.h>
-#include <sys/cmn_err.h>
-#include <sys/ddi.h>
-#else
-#include <sys/user.h>
-#ifdef __osf__
-#include <sys/cmn_err.h>
-#endif
-#endif /* SVR4 */
-
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-/*
- * Right now, mutex is only enabled for Solaris 2.x
- */
-#if defined(SOL2)
-#define USE_MUTEX
-#endif /* SOL2 */
-
-/*
- * intpointer_t and uintpointer_t are signed and unsigned integer types 
- * large enough to hold any data pointer; that is, data pointers can be 
- * assigned into or from these integer types without losing precision.
- * On recent Solaris releases, these types are defined in sys/int_types.h,
- * but not on SunOS 4.x or the earlier Solaris versions.
- */
-#if defined(_LP64) || defined(_I32LPx)
-typedef long                    intpointer_t;
-typedef unsigned long           uintpointer_t;
-#else
-typedef int                     intpointer_t;
-typedef unsigned int            uintpointer_t;
-#endif
-
-MOD_OPEN_DECL(ahdlc_open);
-MOD_CLOSE_DECL(ahdlc_close);
-static int ahdlc_wput __P((queue_t *, mblk_t *));
-static int ahdlc_rput __P((queue_t *, mblk_t *));
-static void ahdlc_encode __P((queue_t *, mblk_t *));
-static void ahdlc_decode __P((queue_t *, mblk_t *));
-static int msg_byte __P((mblk_t *, unsigned int));
-
-#if defined(SOL2)
-/*
- * Don't send HDLC start flag is last transmit is within 1.5 seconds -
- * FLAG_TIME is defined is microseconds
- */
-#define FLAG_TIME   1500
-#define ABS(x)	    (x >= 0 ? x : (-x))
-#endif /* SOL2 */
-
-/*
- * Extract byte i of message mp 
- */
-#define MSG_BYTE(mp, i)	((i) < (mp)->b_wptr - (mp)->b_rptr? (mp)->b_rptr[i]: \
-			 msg_byte((mp), (i)))
-
-/* 
- * Is this LCP packet one we have to transmit using LCP defaults? 
- */
-#define LCP_USE_DFLT(mp)	(1 <= (code = MSG_BYTE((mp), 4)) && code <= 7)
-
-/*
- * Standard STREAMS declarations
- */
-static struct module_info minfo = {
-    0x7d23, "ppp_ahdl", 0, INFPSZ, 32768, 512
-};
-
-static struct qinit rinit = {
-    ahdlc_rput, NULL, ahdlc_open, ahdlc_close, NULL, &minfo, NULL
-};
-
-static struct qinit winit = {
-    ahdlc_wput, NULL, NULL, NULL, NULL, &minfo, NULL
-};
-
-#if defined(SVR4) && !defined(SOL2)
-int phdldevflag = 0;
-#define ppp_ahdlcinfo phdlinfo
-#endif /* defined(SVR4) && !defined(SOL2) */
-
-struct streamtab ppp_ahdlcinfo = {
-    &rinit,			    /* ptr to st_rdinit */
-    &winit,			    /* ptr to st_wrinit */
-    NULL,			    /* ptr to st_muxrinit */
-    NULL,			    /* ptr to st_muxwinit */
-#if defined(SUNOS4)
-    NULL			    /* ptr to ptr to st_modlist */
-#endif /* SUNOS4 */
-};
-
-#if defined(SUNOS4)
-int ppp_ahdlc_count = 0;	    /* open counter */
-#endif /* SUNOS4 */
-
-/*
- * Per-stream state structure
- */
-typedef struct ahdlc_state {
-#if defined(USE_MUTEX)
-    kmutex_t	    lock;		    /* lock for this structure */
-#endif /* USE_MUTEX */
-    int		    flags;		    /* link flags */
-    mblk_t	    *rx_buf;		    /* ptr to receive buffer */
-    int		    rx_buf_size;	    /* receive buffer size */
-    ushort_t	    infcs;		    /* calculated rx HDLC FCS */
-    u_int32_t	    xaccm[8];		    /* 256-bit xmit ACCM */
-    u_int32_t	    raccm;		    /* 32-bit rcv ACCM */
-    int		    mtu;		    /* interface MTU */
-    int		    mru;		    /* link MRU */
-    int		    unit;		    /* current PPP unit number */
-    struct pppstat  stats;		    /* statistic structure */
-#if defined(SOL2)
-    clock_t	    flag_time;		    /* time in usec between flags */
-    clock_t	    lbolt;		    /* last updated lbolt */
-#endif /* SOL2 */
-} ahdlc_state_t;
-
-/*
- * Values for flags 
- */
-#define ESCAPED		0x100	/* last saw escape char on input */
-#define IFLUSH		0x200	/* flushing input due to error */
-
-/* 
- * RCV_B7_1, etc., defined in net/pppio.h, are stored in flags also. 
- */
-#define RCV_FLAGS	(RCV_B7_1|RCV_B7_0|RCV_ODDP|RCV_EVNP)
-
-/*
- * FCS lookup table as calculated by genfcstab.
- */
-static u_short fcstab[256] = {
-	0x0000,	0x1189,	0x2312,	0x329b,	0x4624,	0x57ad,	0x6536,	0x74bf,
-	0x8c48,	0x9dc1,	0xaf5a,	0xbed3,	0xca6c,	0xdbe5,	0xe97e,	0xf8f7,
-	0x1081,	0x0108,	0x3393,	0x221a,	0x56a5,	0x472c,	0x75b7,	0x643e,
-	0x9cc9,	0x8d40,	0xbfdb,	0xae52,	0xdaed,	0xcb64,	0xf9ff,	0xe876,
-	0x2102,	0x308b,	0x0210,	0x1399,	0x6726,	0x76af,	0x4434,	0x55bd,
-	0xad4a,	0xbcc3,	0x8e58,	0x9fd1,	0xeb6e,	0xfae7,	0xc87c,	0xd9f5,
-	0x3183,	0x200a,	0x1291,	0x0318,	0x77a7,	0x662e,	0x54b5,	0x453c,
-	0xbdcb,	0xac42,	0x9ed9,	0x8f50,	0xfbef,	0xea66,	0xd8fd,	0xc974,
-	0x4204,	0x538d,	0x6116,	0x709f,	0x0420,	0x15a9,	0x2732,	0x36bb,
-	0xce4c,	0xdfc5,	0xed5e,	0xfcd7,	0x8868,	0x99e1,	0xab7a,	0xbaf3,
-	0x5285,	0x430c,	0x7197,	0x601e,	0x14a1,	0x0528,	0x37b3,	0x263a,
-	0xdecd,	0xcf44,	0xfddf,	0xec56,	0x98e9,	0x8960,	0xbbfb,	0xaa72,
-	0x6306,	0x728f,	0x4014,	0x519d,	0x2522,	0x34ab,	0x0630,	0x17b9,
-	0xef4e,	0xfec7,	0xcc5c,	0xddd5,	0xa96a,	0xb8e3,	0x8a78,	0x9bf1,
-	0x7387,	0x620e,	0x5095,	0x411c,	0x35a3,	0x242a,	0x16b1,	0x0738,
-	0xffcf,	0xee46,	0xdcdd,	0xcd54,	0xb9eb,	0xa862,	0x9af9,	0x8b70,
-	0x8408,	0x9581,	0xa71a,	0xb693,	0xc22c,	0xd3a5,	0xe13e,	0xf0b7,
-	0x0840,	0x19c9,	0x2b52,	0x3adb,	0x4e64,	0x5fed,	0x6d76,	0x7cff,
-	0x9489,	0x8500,	0xb79b,	0xa612,	0xd2ad,	0xc324,	0xf1bf,	0xe036,
-	0x18c1,	0x0948,	0x3bd3,	0x2a5a,	0x5ee5,	0x4f6c,	0x7df7,	0x6c7e,
-	0xa50a,	0xb483,	0x8618,	0x9791,	0xe32e,	0xf2a7,	0xc03c,	0xd1b5,
-	0x2942,	0x38cb,	0x0a50,	0x1bd9,	0x6f66,	0x7eef,	0x4c74,	0x5dfd,
-	0xb58b,	0xa402,	0x9699,	0x8710,	0xf3af,	0xe226,	0xd0bd,	0xc134,
-	0x39c3,	0x284a,	0x1ad1,	0x0b58,	0x7fe7,	0x6e6e,	0x5cf5,	0x4d7c,
-	0xc60c,	0xd785,	0xe51e,	0xf497,	0x8028,	0x91a1,	0xa33a,	0xb2b3,
-	0x4a44,	0x5bcd,	0x6956,	0x78df,	0x0c60,	0x1de9,	0x2f72,	0x3efb,
-	0xd68d,	0xc704,	0xf59f,	0xe416,	0x90a9,	0x8120,	0xb3bb,	0xa232,
-	0x5ac5,	0x4b4c,	0x79d7,	0x685e,	0x1ce1,	0x0d68,	0x3ff3,	0x2e7a,
-	0xe70e,	0xf687,	0xc41c,	0xd595,	0xa12a,	0xb0a3,	0x8238,	0x93b1,
-	0x6b46,	0x7acf,	0x4854,	0x59dd,	0x2d62,	0x3ceb,	0x0e70,	0x1ff9,
-	0xf78f,	0xe606,	0xd49d,	0xc514,	0xb1ab,	0xa022,	0x92b9,	0x8330,
-	0x7bc7,	0x6a4e,	0x58d5,	0x495c,	0x3de3,	0x2c6a,	0x1ef1,	0x0f78
-};
-
-static u_int32_t paritytab[8] =
-{
-	0x96696996, 0x69969669, 0x69969669, 0x96696996,
-	0x69969669, 0x96696996, 0x96696996, 0x69969669
-};
-
-/*
- * STREAMS module open (entry) point
- */
-MOD_OPEN(ahdlc_open)
-{
-    ahdlc_state_t   *state;
-
-    /*
-     * Return if it's already opened
-     */
-    if (q->q_ptr) {
-	return 0;
-    }
-
-    /*
-     * This can only be opened as a module
-     */
-    if (sflag != MODOPEN) {
-	return 0;
-    }
-
-    state = (ahdlc_state_t *) ALLOC_NOSLEEP(sizeof(ahdlc_state_t));
-    if (state == 0)
-	OPEN_ERROR(ENOSR);
-    bzero((caddr_t) state, sizeof(ahdlc_state_t));
-
-    q->q_ptr	 = (caddr_t) state;
-    WR(q)->q_ptr = (caddr_t) state;
-
-#if defined(USE_MUTEX)
-    mutex_init(&state->lock, NULL, MUTEX_DEFAULT, NULL);
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    state->xaccm[0] = ~0;	    /* escape 0x00 through 0x1f */
-    state->xaccm[3] = 0x60000000;   /* escape 0x7d and 0x7e */
-    state->mru	    = PPP_MRU;	    /* default of 1500 bytes */
-#if defined(SOL2)
-    state->flag_time = drv_usectohz(FLAG_TIME);
-#endif /* SOL2 */
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */	
-
-#if defined(SUNOS4)
-    ppp_ahdlc_count++;
-#endif /* SUNOS4 */
-
-    qprocson(q);
-    
-    return 0;
-}
-
-/*
- * STREAMS module close (exit) point
- */
-MOD_CLOSE(ahdlc_close)
-{
-    ahdlc_state_t   *state;
-
-    qprocsoff(q);
-
-    state = (ahdlc_state_t *) q->q_ptr;
-
-    if (state == 0) {
-	DPRINT("state == 0 in ahdlc_close\n");
-	return 0;
-    }
-
-#if defined(USE_MUTEX)
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    if (state->rx_buf != 0) {
-	freemsg(state->rx_buf);
-	state->rx_buf = 0;
-    }
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-    mutex_destroy(&state->lock);
-#endif /* USE_MUTEX */
-
-    FREE(q->q_ptr, sizeof(ahdlc_state_t));
-    q->q_ptr	     = NULL;
-    OTHERQ(q)->q_ptr = NULL;
-
-#if defined(SUNOS4)
-    if (ppp_ahdlc_count)
-	ppp_ahdlc_count--;
-#endif /* SUNOS4 */
-    
-    return 0;
-}
-
-/*
- * Write side put routine
- */
-static int
-ahdlc_wput(q, mp)
-    queue_t	*q;
-    mblk_t	*mp;
-{
-    ahdlc_state_t  	*state;
-    struct iocblk  	*iop;
-    int		   	error;
-    mblk_t	   	*np;
-    struct ppp_stats	*psp;
-
-    state = (ahdlc_state_t *) q->q_ptr;
-    if (state == 0) {
-	DPRINT("state == 0 in ahdlc_wput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-    case M_DATA:
-	/*
-	 * A data packet - do character-stuffing and FCS, and
-	 * send it onwards.
-	 */
-	ahdlc_encode(q, mp);
-	freemsg(mp);
-	break;
-
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	error = EINVAL;
-	switch (iop->ioc_cmd) {
-	case PPPIO_XACCM:
-	    if ((iop->ioc_count < sizeof(u_int32_t)) || 
-		(iop->ioc_count > sizeof(ext_accm))) {
-		break;
-	    }
-	    if (mp->b_cont == 0) {
-		DPRINT1("ahdlc_wput/%d: PPPIO_XACCM b_cont = 0!\n", state->unit);
-		break;
-	    }
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    bcopy((caddr_t)mp->b_cont->b_rptr, (caddr_t)state->xaccm,
-		  iop->ioc_count);
-	    state->xaccm[2] &= ~0x40000000;	/* don't escape 0x5e */
-	    state->xaccm[3] |= 0x60000000;	/* do escape 0x7d, 0x7e */
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case PPPIO_RACCM:
-	    if (iop->ioc_count != sizeof(u_int32_t))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ahdlc_wput/%d: PPPIO_RACCM b_cont = 0!\n", state->unit);
-		break;
-	    }
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    bcopy((caddr_t)mp->b_cont->b_rptr, (caddr_t)&state->raccm,
-		  sizeof(u_int32_t));
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case PPPIO_GCLEAN:
-	    np = allocb(sizeof(int), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    *(int *)np->b_wptr = state->flags & RCV_FLAGS;
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    np->b_wptr += sizeof(int);
-	    iop->ioc_count = sizeof(int);
-	    error = 0;
-	    break;
-
-	case PPPIO_GETSTAT:
-	    np = allocb(sizeof(struct ppp_stats), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-	    psp = (struct ppp_stats *) np->b_wptr;
-	    np->b_wptr += sizeof(struct ppp_stats);
-	    bzero((caddr_t)psp, sizeof(struct ppp_stats));
-	    psp->p = state->stats;
-	    iop->ioc_count = sizeof(struct ppp_stats);
-	    error = 0;
-	    break;
-
-	case PPPIO_LASTMOD:
-	    /* we knew this anyway */
-	    error = 0;
-	    break;
-
-	default:
-	    error = -1;
-	    break;
-	}
-
-	if (error < 0)
-	    putnext(q, mp);
-	else if (error == 0) {
-	    mp->b_datap->db_type = M_IOCACK;
-	    qreply(q, mp);
-	} else {
-	    mp->b_datap->db_type = M_IOCNAK;
-	    iop->ioc_count = 0;
-	    iop->ioc_error = error;
-	    qreply(q, mp);
-	}
-	break;
-
-    case M_CTL:
-	switch (*mp->b_rptr) {
-	case PPPCTL_MTU:
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    state->mtu = ((unsigned short *)mp->b_rptr)[1];
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    freemsg(mp);
-	    break;
-	case PPPCTL_MRU:
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    state->mru = ((unsigned short *)mp->b_rptr)[1];
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    freemsg(mp);
-	    break;
-	case PPPCTL_UNIT:
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    state->unit = mp->b_rptr[1];
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    break;
-	default:
-	    putnext(q, mp);
-	}
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-/*
- * Read side put routine
- */
-static int
-ahdlc_rput(q, mp)
-    queue_t *q;
-    mblk_t  *mp;
-{
-    ahdlc_state_t *state;
-
-    state = (ahdlc_state_t *) q->q_ptr;
-    if (state == 0) {
-	DPRINT("state == 0 in ahdlc_rput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-    case M_DATA:
-	ahdlc_decode(q, mp);
-	freemsg(mp);
-	break;
-
-    case M_HANGUP:
-#if defined(USE_MUTEX)
-	mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	if (state->rx_buf != 0) {
-	    /* XXX would like to send this up for debugging */
-	    freemsg(state->rx_buf);
-	    state->rx_buf = 0;
-	}
-	state->flags = IFLUSH;
-#if defined(USE_MUTEX)
-	mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	putnext(q, mp);
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-    return 0;
-}
-
-/*
- * Extract bit c from map m, to determine if c needs to be escaped
- */
-#define IN_TX_MAP(c, m)	((m)[(c) >> 5] & (1 << ((c) & 0x1f)))
-
-static void
-ahdlc_encode(q, mp)
-    queue_t	*q;
-    mblk_t	*mp;
-{
-    ahdlc_state_t	*state;
-    u_int32_t		*xaccm, loc_xaccm[8];
-    ushort_t		fcs;
-    size_t		outmp_len;
-    mblk_t		*outmp, *tmp;
-    uchar_t		*dp, fcs_val;
-    int			is_lcp, code;
-#if defined(SOL2)
-    clock_t		lbolt;
-#endif /* SOL2 */
-
-    if (msgdsize(mp) < 4) {
-	return;
-    }
-
-    state = (ahdlc_state_t *)q->q_ptr;
-#if defined(USE_MUTEX)
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    /*
-     * Allocate an output buffer large enough to handle a case where all
-     * characters need to be escaped
-     */
-    outmp_len = (msgdsize(mp)	 << 1) +		/* input block x 2 */
-		(sizeof(fcs)	 << 2) +		/* HDLC FCS x 4 */
-		(sizeof(uchar_t) << 1);			/* HDLC flags x 2 */
-
-    outmp = allocb(outmp_len, BPRI_MED);
-    if (outmp == NULL) {
-	state->stats.ppp_oerrors++;
-#if defined(USE_MUTEX)
-	mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
-	return;
-    }
-
-#if defined(SOL2)
-    /*
-     * Check if our last transmit happenned within flag_time, using
-     * the system's LBOLT value in clock ticks
-     */
-    if (drv_getparm(LBOLT, &lbolt) != -1) {
-	if (ABS((clock_t)lbolt - state->lbolt) > state->flag_time) {
-	    *outmp->b_wptr++ = PPP_FLAG;
-	} 
-	state->lbolt = lbolt;
-    } else {
-	*outmp->b_wptr++ = PPP_FLAG;
-    }
-#else
-    /*
-     * If the driver below still has a message to process, skip the
-     * HDLC flag, otherwise, put one in the beginning
-     */
-    if (qsize(q->q_next) == 0) {
-	*outmp->b_wptr++ = PPP_FLAG;
-    }
-#endif
-
-    /*
-     * All control characters must be escaped for LCP packets with code
-     * values between 1 (Conf-Req) and 7 (Code-Rej).
-     */
-    is_lcp = ((MSG_BYTE(mp, 0) == PPP_ALLSTATIONS) && 
-	      (MSG_BYTE(mp, 1) == PPP_UI) && 
-	      (MSG_BYTE(mp, 2) == (PPP_LCP >> 8)) &&
-	      (MSG_BYTE(mp, 3) == (PPP_LCP & 0xff)) &&
-	      LCP_USE_DFLT(mp));
-
-    xaccm = state->xaccm;
-    if (is_lcp) {
-	bcopy((caddr_t)state->xaccm, (caddr_t)loc_xaccm, sizeof(loc_xaccm));
-	loc_xaccm[0] = ~0;	/* force escape on 0x00 through 0x1f */
-	xaccm = loc_xaccm;
-    }
-
-    fcs = PPP_INITFCS;		/* Initial FCS is 0xffff */
-
-    /*
-     * Process this block and the rest (if any) attached to the this one
-     */
-    for (tmp = mp; tmp; tmp = tmp->b_cont) {
-	if (tmp->b_datap->db_type == M_DATA) {
-	    for (dp = tmp->b_rptr; dp < tmp->b_wptr; dp++) {
-		fcs = PPP_FCS(fcs, *dp);
-		if (IN_TX_MAP(*dp, xaccm)) {
-		    *outmp->b_wptr++ = PPP_ESCAPE;
-		    *outmp->b_wptr++ = *dp ^ PPP_TRANS;
-		} else {
-		    *outmp->b_wptr++ = *dp;
-		}
-	    }
-	} else {
-	    continue;	/* skip if db_type is something other than M_DATA */
-	}
-    }
-
-    /*
-     * Append the HDLC FCS, making sure that escaping is done on any
-     * necessary bytes
-     */
-    fcs_val = (fcs ^ 0xffff) & 0xff;
-    if (IN_TX_MAP(fcs_val, xaccm)) {
-	*outmp->b_wptr++ = PPP_ESCAPE;
-	*outmp->b_wptr++ = fcs_val ^ PPP_TRANS;
-    } else {
-	*outmp->b_wptr++ = fcs_val;
-    }
-
-    fcs_val = ((fcs ^ 0xffff) >> 8) & 0xff;
-    if (IN_TX_MAP(fcs_val, xaccm)) {
-	*outmp->b_wptr++ = PPP_ESCAPE;
-	*outmp->b_wptr++ = fcs_val ^ PPP_TRANS;
-    } else {
-	*outmp->b_wptr++ = fcs_val;
-    }
-
-    /*
-     * And finally, append the HDLC flag, and send it away
-     */
-    *outmp->b_wptr++ = PPP_FLAG;
-
-    state->stats.ppp_obytes += msgdsize(outmp);
-    state->stats.ppp_opackets++;
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-
-    putnext(q, outmp);
-    return;
-}
-
-/*
- * Checks the 32-bit receive ACCM to see if the byte needs un-escaping
- */
-#define IN_RX_MAP(c, m)	((((unsigned int) (uchar_t) (c)) < 0x20) && \
-			(m) & (1 << (c)))
-
-
-/*
- * Process received characters.
- */
-static void
-ahdlc_decode(q, mp)
-    queue_t *q;
-    mblk_t  *mp;
-{
-    ahdlc_state_t   *state;
-    mblk_t	    *om;
-    uchar_t	    *dp;
-    ushort_t	    fcs;
-#if defined(SOL2)
-    mblk_t	    *zmp;
-#endif /* SOL2 */
-
-#if defined(SOL2)
-    /*
-     * In case the driver (or something below) doesn't send
-     * data upstream in one message block, concatenate everything
-     */
-    if (!((mp->b_wptr - mp->b_rptr == msgdsize(mp)) && 
-         ((intpointer_t)mp->b_rptr % sizeof(intpointer_t) == 0))) {
-
-	zmp = msgpullup(mp, -1);
-	freemsg(mp);
-	mp = zmp;
-	if (mp == 0)
-	    return; 
-    }
-#endif /* SOL2 */
-
-    state = (ahdlc_state_t *) q->q_ptr;
-
-#if defined(USE_MUTEX)
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    state->stats.ppp_ibytes += msgdsize(mp);
-
-    for (dp = mp->b_rptr; dp < mp->b_wptr; dp++) {
-
-	/*
-	 * This should detect the lack of 8-bit communication channel
-	 * which is necessary for PPP to work. In addition, it also
-	 * checks on the parity.
-	 */
-	if (*dp & 0x80)
-	    state->flags |= RCV_B7_1;
-	else
-	    state->flags |= RCV_B7_0;
-
-	if (paritytab[*dp >> 5] & (1 << (*dp & 0x1f)))
-	    state->flags |= RCV_ODDP;
-	else
-	    state->flags |= RCV_EVNP;
-
-	/*
-	 * So we have a HDLC flag ...
-	 */
-	if (*dp == PPP_FLAG) {
-
-	    /*
-	     * If we think that it marks the beginning of the frame,
-	     * then continue to process the next octects
-	     */
-	    if ((state->flags & IFLUSH) ||
-		(state->rx_buf == 0) ||
-		(msgdsize(state->rx_buf) == 0)) {
-
-		state->flags &= ~IFLUSH;
-		continue;
-	    }
-
-	    /*
-	     * We get here because the above condition isn't true,
-	     * in which case the HDLC flag was there to mark the end
-	     * of the frame (or so we think)
-	     */
-	    om = state->rx_buf;
-
-	    if (state->infcs == PPP_GOODFCS) {
-		state->stats.ppp_ipackets++;
-		adjmsg(om, -PPP_FCSLEN);
-		putnext(q, om);
-	    } else {
-		DPRINT2("ppp%d: bad fcs (len=%d)\n",
-                    state->unit, msgdsize(state->rx_buf));
-		freemsg(state->rx_buf);
-		state->flags &= ~(IFLUSH | ESCAPED);
-		state->stats.ppp_ierrors++;
-		putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-	    }
-
-	    state->rx_buf = 0;
-	    continue;
-	}
-
-	if (state->flags & IFLUSH) {
-	    continue;
-	}
-
-	/*
-	 * Allocate a receive buffer, large enough to store a frame (after
-	 * un-escaping) of at least 1500 octets. If MRU is negotiated to
-	 * be more than the default, then allocate that much. In addition,
-	 * we add an extra 32-bytes for a fudge factor
-	 */ 
-	if (state->rx_buf == 0) {
-	    state->rx_buf_size  = (state->mru < PPP_MRU ? PPP_MRU : state->mru);
-	    state->rx_buf_size += (sizeof(u_int32_t) << 3);
-	    state->rx_buf = allocb(state->rx_buf_size, BPRI_MED);
-
-	    /*
-	     * If allocation fails, try again on the next frame
-	     */
-	    if (state->rx_buf == 0) {
-		state->flags |= IFLUSH;
-		continue;
-	    }
-	    state->flags &= ~(IFLUSH | ESCAPED);
-	    state->infcs  = PPP_INITFCS;
-	}
-
-	if (*dp == PPP_ESCAPE) {
-	    state->flags |= ESCAPED;
-	    continue;
-	}
-
-	/*
-	 * Make sure we un-escape the necessary characters, as well as the
-	 * ones in our receive async control character map
-	 */
-	if (state->flags & ESCAPED) {
-	    *dp ^= PPP_TRANS;
-	    state->flags &= ~ESCAPED;
-	} else if (IN_RX_MAP(*dp, state->raccm)) 
-	    continue;
-
-	/*
-	 * Unless the peer lied to us about the negotiated MRU, we should
-	 * never get a frame which is too long. If it happens, toss it away
-	 * and grab the next incoming one
-	 */
-	if (msgdsize(state->rx_buf) < state->rx_buf_size) {
-	    state->infcs = PPP_FCS(state->infcs, *dp);
-	    *state->rx_buf->b_wptr++ = *dp;
-	} else {
-	    DPRINT2("ppp%d: frame too long (%d)\n",
-		state->unit, msgdsize(state->rx_buf));
-	    freemsg(state->rx_buf);
-	    state->rx_buf     = 0;
-	    state->flags     |= IFLUSH;
-	}
-    }
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-}
-
-static int
-msg_byte(mp, i)
-    mblk_t *mp;
-    unsigned int i;
-{
-    while (mp != 0 && i >= mp->b_wptr - mp->b_rptr)
-	mp = mp->b_cont;
-    if (mp == 0)
-	return -1;
-    return mp->b_rptr[i];
-}
diff --git a/mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c b/mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c
deleted file mode 100644
index f81be8abb..000000000
--- a/mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c
+++ /dev/null
@@ -1,49 +0,0 @@
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-
-extern struct streamtab ppp_ahdlcinfo;
-
-static struct fmodsw fsw = {
-    "ppp_ahdl",
-    &ppp_ahdlcinfo,
-    D_NEW | D_MP | D_MTQPAIR
-};
-
-extern struct mod_ops mod_strmodops;
-
-static struct modlstrmod modlstrmod = {
-    &mod_strmodops,
-    "PPP async HDLC module",
-    &fsw
-};
-
-static struct modlinkage modlinkage = {
-    MODREV_1,
-    (void *) &modlstrmod,
-    NULL
-};
-
-/*
- * Entry points for modloading.
- */
-int
-_init(void)
-{
-    return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
-    return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
-    struct modinfo *mip;
-{
-    return mod_info(&modlinkage, mip);
-}
diff --git a/mdk-stage1/ppp/solaris/ppp_comp.c b/mdk-stage1/ppp/solaris/ppp_comp.c
deleted file mode 100644
index f6eef5ab1..000000000
--- a/mdk-stage1/ppp/solaris/ppp_comp.c
+++ /dev/null
@@ -1,1126 +0,0 @@
-/*
- * ppp_comp.c - STREAMS module for kernel-level compression and CCP support.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under SVR4, Solaris 2, SunOS 4, and Digital UNIX.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/errno.h>
-#include <sys/stream.h>
-
-#ifdef SVR4
-#include <sys/conf.h>
-#include <sys/cmn_err.h>
-#include <sys/ddi.h>
-#else
-#include <sys/user.h>
-#ifdef __osf__
-#include <sys/cmn_err.h>
-#endif
-#endif /* SVR4 */
-
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-#ifdef __osf__
-#include <sys/mbuf.h>
-#include <sys/protosw.h>
-#endif
-
-#include <netinet/in.h>
-#include <netinet/in_systm.h>
-#include <netinet/ip.h>
-#include <net/vjcompress.h>
-
-#define PACKETPTR	mblk_t *
-#include <net/ppp-comp.h>
-
-MOD_OPEN_DECL(ppp_comp_open);
-MOD_CLOSE_DECL(ppp_comp_close);
-static int ppp_comp_rput __P((queue_t *, mblk_t *));
-static int ppp_comp_rsrv __P((queue_t *));
-static int ppp_comp_wput __P((queue_t *, mblk_t *));
-static int ppp_comp_wsrv __P((queue_t *));
-static void ppp_comp_ccp __P((queue_t *, mblk_t *, int));
-static int msg_byte __P((mblk_t *, unsigned int));
-
-/* Extract byte i of message mp. */
-#define MSG_BYTE(mp, i)	((i) < (mp)->b_wptr - (mp)->b_rptr? (mp)->b_rptr[i]: \
-			 msg_byte((mp), (i)))
-
-/* Is this LCP packet one we have to transmit using LCP defaults? */
-#define LCP_USE_DFLT(mp)	(1 <= (code = MSG_BYTE((mp), 4)) && code <= 7)
-
-#define PPP_COMP_ID 0xbadf
-static struct module_info minfo = {
-#ifdef PRIOQ
-    PPP_COMP_ID, "ppp_comp", 0, INFPSZ, 16512, 16384,
-#else
-    PPP_COMP_ID, "ppp_comp", 0, INFPSZ, 16384, 4096,
-#endif
-};
-
-static struct qinit r_init = {
-    ppp_comp_rput, ppp_comp_rsrv, ppp_comp_open, ppp_comp_close,
-    NULL, &minfo, NULL
-};
-
-static struct qinit w_init = {
-    ppp_comp_wput, ppp_comp_wsrv, NULL, NULL, NULL, &minfo, NULL
-};
-
-#if defined(SVR4) && !defined(SOL2)
-int pcmpdevflag = 0;
-#define ppp_compinfo pcmpinfo
-#endif
-struct streamtab ppp_compinfo = {
-    &r_init, &w_init, NULL, NULL
-};
-
-int ppp_comp_count;		/* number of module instances in use */
-
-#ifdef __osf__
-
-static void ppp_comp_alloc __P((comp_state_t *));
-typedef struct memreq {
-    unsigned char comp_opts[20];
-    int cmd;
-    int thread_status;
-    char *returned_mem;
-} memreq_t;
-
-#endif
-
-typedef struct comp_state {
-    int		flags;
-    int		mru;
-    int		mtu;
-    int		unit;
-    struct compressor *xcomp;
-    void	*xstate;
-    struct compressor *rcomp;
-    void	*rstate;
-    struct vjcompress vj_comp;
-    int		vj_last_ierrors;
-    struct pppstat stats;
-#ifdef __osf__
-    memreq_t	memreq;
-    thread_t	thread;
-#endif
-} comp_state_t;
-
-
-#ifdef __osf__
-extern task_t first_task;
-#endif
-
-/* Bits in flags are as defined in pppio.h. */
-#define CCP_ERR		(CCP_ERROR | CCP_FATALERROR)
-#define LAST_MOD	0x1000000	/* no ppp modules below us */
-#define DBGLOG		0x2000000	/* log debugging stuff */
-
-#define MAX_IPHDR	128	/* max TCP/IP header size */
-#define MAX_VJHDR	20	/* max VJ compressed header size (?) */
-
-#undef MIN		/* just in case */
-#define MIN(a, b)	((a) < (b)? (a): (b))
-
-/*
- * List of compressors we know about.
- */
-
-#if DO_BSD_COMPRESS
-extern struct compressor ppp_bsd_compress;
-#endif
-#if DO_DEFLATE
-extern struct compressor ppp_deflate, ppp_deflate_draft;
-#endif
-
-struct compressor *ppp_compressors[] = {
-#if DO_BSD_COMPRESS
-    &ppp_bsd_compress,
-#endif
-#if DO_DEFLATE
-    &ppp_deflate,
-    &ppp_deflate_draft,
-#endif
-    NULL
-};
-
-/*
- * STREAMS module entry points.
- */
-MOD_OPEN(ppp_comp_open)
-{
-    comp_state_t *cp;
-#ifdef __osf__
-    thread_t thread;
-#endif
-
-    if (q->q_ptr == NULL) {
-	cp = (comp_state_t *) ALLOC_SLEEP(sizeof(comp_state_t));
-	if (cp == NULL)
-	    OPEN_ERROR(ENOSR);
-	bzero((caddr_t)cp, sizeof(comp_state_t));
-	WR(q)->q_ptr = q->q_ptr = (caddr_t) cp;
-	cp->mru = PPP_MRU;
-	cp->mtu = PPP_MTU;
-	cp->xstate = NULL;
-	cp->rstate = NULL;
-	vj_compress_init(&cp->vj_comp, -1);
-#ifdef __osf__
-	if (!(thread = kernel_thread_w_arg(first_task, ppp_comp_alloc, (void *)cp)))
-		OPEN_ERROR(ENOSR);
-	cp->thread = thread;
-#endif
-	++ppp_comp_count;
-	qprocson(q);
-    }
-    return 0;
-}
-
-MOD_CLOSE(ppp_comp_close)
-{
-    comp_state_t *cp;
-
-    qprocsoff(q);
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp != NULL) {
-	if (cp->xstate != NULL)
-	    (*cp->xcomp->comp_free)(cp->xstate);
-	if (cp->rstate != NULL)
-	    (*cp->rcomp->decomp_free)(cp->rstate);
-#ifdef __osf__
-	if (!cp->thread)
-	    printf("ppp_comp_close: NULL thread!\n");
-	else
-	    thread_terminate(cp->thread);
-#endif
-	FREE(cp, sizeof(comp_state_t));
-	q->q_ptr = NULL;
-	OTHERQ(q)->q_ptr = NULL;
-	--ppp_comp_count;
-    }
-    return 0;
-}
-
-#ifdef __osf__
-
-/* thread for calling back to a compressor's memory allocator
- * Needed for Digital UNIX since it's VM can't handle requests
- * for large amounts of memory without blocking.  The thread
- * provides a context in which we can call a memory allocator
- * that may block.
- */
-static void
-ppp_comp_alloc(comp_state_t *cp)
-{
-    int len, cmd;
-    unsigned char *compressor_options;
-    thread_t thread;
-    void *(*comp_allocator)();
-
-
-#if defined(MAJOR_VERSION) && (MAJOR_VERSION <= 2)
-
-    /* In 2.x and earlier the argument gets passed
-     * in the thread structure itself.  Yuck.
-     */
-    thread = current_thread();
-    cp = thread->reply_port;
-    thread->reply_port = PORT_NULL;
-
-#endif
-
-    for (;;) {
-	assert_wait((vm_offset_t)&cp->memreq.thread_status, TRUE);
-	thread_block();
-
-	if (thread_should_halt(current_thread()))
-	    thread_halt_self();
-	cmd = cp->memreq.cmd;
-	compressor_options = &cp->memreq.comp_opts[0];
-	len = compressor_options[1];
-	if (cmd == PPPIO_XCOMP) {
-	    cp->memreq.returned_mem = cp->xcomp->comp_alloc(compressor_options, len);
-	    if (!cp->memreq.returned_mem) {
-		cp->memreq.thread_status = ENOSR;
-	    } else {
-		cp->memreq.thread_status = 0;
-	    }
-	} else {
-	    cp->memreq.returned_mem = cp->rcomp->decomp_alloc(compressor_options, len);
-	    if (!cp->memreq.returned_mem) {
-	        cp->memreq.thread_status = ENOSR;
-	    } else {
-		cp->memreq.thread_status = 0;
-	    }
-	}
-    }
-}
-
-#endif /* __osf__ */
-
-/* here's the deal with memory allocation under Digital UNIX.
- * Some other may also benefit from this...
- * We can't ask for huge chunks of memory in a context where
- * the caller can't be put to sleep (like, here.)  The alloc
- * is likely to fail.  Instead we do this: the first time we
- * get called, kick off a thread to do the allocation.  Return
- * immediately to the caller with EAGAIN, as an indication that
- * they should send down the ioctl again.  By the time the
- * second call comes in it's likely that the memory allocation
- * thread will have returned with the requested memory.  We will
- * continue to return EAGAIN however until the thread has completed.
- * When it has, we return zero (and the memory) if the allocator
- * was successful and ENOSR otherwise.
- *
- * Callers of the RCOMP and XCOMP ioctls are encouraged (but not
- * required) to loop for some number of iterations with a small
- * delay in the loop body (for instance a 1/10-th second "sleep"
- * via select.)
- */
-static int
-ppp_comp_wput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    struct iocblk *iop;
-    comp_state_t *cp;
-    int error, len, n;
-    int flags, mask;
-    mblk_t *np;
-    struct compressor **comp;
-    struct ppp_stats *psp;
-    struct ppp_comp_stats *csp;
-    unsigned char *opt_data;
-    int nxslots, nrslots;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_wput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-
-    case M_DATA:
-	putq(q, mp);
-	break;
-
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	error = EINVAL;
-	switch (iop->ioc_cmd) {
-
-	case PPPIO_CFLAGS:
-	    /* set/get CCP state */
-	    if (iop->ioc_count != 2 * sizeof(int))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_CFLAGS b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    flags = ((int *) mp->b_cont->b_rptr)[0];
-	    mask = ((int *) mp->b_cont->b_rptr)[1];
-	    cp->flags = (cp->flags & ~mask) | (flags & mask);
-	    if ((mask & CCP_ISOPEN) && (flags & CCP_ISOPEN) == 0) {
-		if (cp->xstate != NULL) {
-		    (*cp->xcomp->comp_free)(cp->xstate);
-		    cp->xstate = NULL;
-		}
-		if (cp->rstate != NULL) {
-		    (*cp->rcomp->decomp_free)(cp->rstate);
-		    cp->rstate = NULL;
-		}
-		cp->flags &= ~CCP_ISUP;
-	    }
-	    error = 0;
-	    iop->ioc_count = sizeof(int);
-	    ((int *) mp->b_cont->b_rptr)[0] = cp->flags;
-	    mp->b_cont->b_wptr = mp->b_cont->b_rptr + sizeof(int);
-	    break;
-
-	case PPPIO_VJINIT:
-	    /*
-	     * Initialize VJ compressor/decompressor
-	     */
-	    if (iop->ioc_count != 2)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_VJINIT b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    nxslots = mp->b_cont->b_rptr[0] + 1;
-	    nrslots = mp->b_cont->b_rptr[1] + 1;
-	    if (nxslots > MAX_STATES || nrslots > MAX_STATES)
-		break;
-	    vj_compress_init(&cp->vj_comp, nxslots);
-	    cp->vj_last_ierrors = cp->stats.ppp_ierrors;
-	    error = 0;
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_XCOMP:
-	case PPPIO_RCOMP:
-	    if (iop->ioc_count <= 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_[XR]COMP b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    opt_data = mp->b_cont->b_rptr;
-	    len = mp->b_cont->b_wptr - opt_data;
-	    if (len > iop->ioc_count)
-		len = iop->ioc_count;
-	    if (opt_data[1] < 2 || opt_data[1] > len)
-		break;
-	    for (comp = ppp_compressors; *comp != NULL; ++comp)
-		if ((*comp)->compress_proto == opt_data[0]) {
-		    /* here's the handler! */
-		    error = 0;
-#ifndef __osf__
-		    if (iop->ioc_cmd == PPPIO_XCOMP) {
-			/* A previous call may have fetched memory for a compressor
-			 * that's now being retired or reset.  Free it using it's
-			 * mechanism for freeing stuff.
-			 */
-			if (cp->xstate != NULL) {
-			    (*cp->xcomp->comp_free)(cp->xstate);
-			    cp->xstate = NULL;
-			}
-			cp->xcomp = *comp;
-			cp->xstate = (*comp)->comp_alloc(opt_data, len);
-			if (cp->xstate == NULL)
-			    error = ENOSR;
-		    } else {
-			if (cp->rstate != NULL) {
-			    (*cp->rcomp->decomp_free)(cp->rstate);
-			    cp->rstate = NULL;
-			}
-			cp->rcomp = *comp;
-			cp->rstate = (*comp)->decomp_alloc(opt_data, len);
-			if (cp->rstate == NULL)
-			    error = ENOSR;
-		    }
-#else
-		    if ((error = cp->memreq.thread_status) != EAGAIN)
-		    if (iop->ioc_cmd == PPPIO_XCOMP) {
-			if (cp->xstate) {
-			    (*cp->xcomp->comp_free)(cp->xstate);
-			    cp->xstate = 0;
-			}
-			/* sanity check for compressor options
-			 */
-			if (sizeof (cp->memreq.comp_opts) < len) {
-			    printf("can't handle options for compressor %d (%d)\n", opt_data[0],
-				opt_data[1]);
-			    cp->memreq.thread_status = ENOSR;
-			    cp->memreq.returned_mem = 0;
-			}
-			/* fill in request for the thread and kick it off
-			 */
-			if (cp->memreq.thread_status == 0 && !cp->memreq.returned_mem) {
-			    bcopy(opt_data, cp->memreq.comp_opts, len);
-			    cp->memreq.cmd = PPPIO_XCOMP;
-			    cp->xcomp = *comp;
-			    error = cp->memreq.thread_status = EAGAIN;
-			    thread_wakeup((vm_offset_t)&cp->memreq.thread_status);
-			} else {
-			    cp->xstate = cp->memreq.returned_mem;
-			    cp->memreq.returned_mem = 0;
-			    cp->memreq.thread_status = 0;
-			}
-		    } else {
-			if (cp->rstate) {
-			    (*cp->rcomp->decomp_free)(cp->rstate);
-			    cp->rstate = NULL;
-			}
-			if (sizeof (cp->memreq.comp_opts) < len) {
-			    printf("can't handle options for compressor %d (%d)\n", opt_data[0],
-				opt_data[1]);
-			    cp->memreq.thread_status = ENOSR;
-			    cp->memreq.returned_mem = 0;
-			}
-			if (cp->memreq.thread_status == 0 && !cp->memreq.returned_mem) {
-			    bcopy(opt_data, cp->memreq.comp_opts, len);
-			    cp->memreq.cmd = PPPIO_RCOMP;
-			    cp->rcomp = *comp;
-			    error = cp->memreq.thread_status = EAGAIN;
-			    thread_wakeup((vm_offset_t)&cp->memreq.thread_status);
-			} else {
-			    cp->rstate = cp->memreq.returned_mem;
-			    cp->memreq.returned_mem = 0;
-			    cp->memreq.thread_status = 0;
-			}
-		    }
-#endif
-		    break;
-		}
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_GETSTAT:
-	    if ((cp->flags & LAST_MOD) == 0) {
-		error = -1;	/* let the ppp_ahdl module handle it */
-		break;
-	    }
-	    np = allocb(sizeof(struct ppp_stats), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-	    psp = (struct ppp_stats *) np->b_wptr;
-	    np->b_wptr += sizeof(struct ppp_stats);
-	    iop->ioc_count = sizeof(struct ppp_stats);
-	    psp->p = cp->stats;
-	    psp->vj = cp->vj_comp.stats;
-	    error = 0;
-	    break;
-
-	case PPPIO_GETCSTAT:
-	    np = allocb(sizeof(struct ppp_comp_stats), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-	    csp = (struct ppp_comp_stats *) np->b_wptr;
-	    np->b_wptr += sizeof(struct ppp_comp_stats);
-	    iop->ioc_count = sizeof(struct ppp_comp_stats);
-	    bzero((caddr_t)csp, sizeof(struct ppp_comp_stats));
-	    if (cp->xstate != 0)
-		(*cp->xcomp->comp_stat)(cp->xstate, &csp->c);
-	    if (cp->rstate != 0)
-		(*cp->rcomp->decomp_stat)(cp->rstate, &csp->d);
-	    error = 0;
-	    break;
-
-	case PPPIO_DEBUG:
-	    if (iop->ioc_count != sizeof(int))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_DEBUG b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n == PPPDBG_LOG + PPPDBG_COMP) {
-		DPRINT1("ppp_comp%d: debug log enabled\n", cp->unit);
-		cp->flags |= DBGLOG;
-		error = 0;
-		iop->ioc_count = 0;
-	    } else {
-		error = -1;
-	    }
-	    break;
-
-	case PPPIO_LASTMOD:
-	    cp->flags |= LAST_MOD;
-	    error = 0;
-	    break;
-
-	default:
-	    error = -1;
-	    break;
-	}
-
-	if (error < 0)
-	    putnext(q, mp);
-	else if (error == 0) {
-	    mp->b_datap->db_type = M_IOCACK;
-	    qreply(q, mp);
-	} else {
-	    mp->b_datap->db_type = M_IOCNAK;
-	    iop->ioc_error = error;
-	    iop->ioc_count = 0;
-	    qreply(q, mp);
-	}
-	break;
-
-    case M_CTL:
-	switch (*mp->b_rptr) {
-	case PPPCTL_MTU:
-	    cp->mtu = ((unsigned short *)mp->b_rptr)[1];
-	    break;
-	case PPPCTL_MRU:
-	    cp->mru = ((unsigned short *)mp->b_rptr)[1];
-	    break;
-	case PPPCTL_UNIT:
-	    cp->unit = mp->b_rptr[1];
-	    break;
-	}
-	putnext(q, mp);
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-static int
-ppp_comp_wsrv(q)
-    queue_t *q;
-{
-    mblk_t *mp, *cmp = NULL;
-    comp_state_t *cp;
-    int len, proto, type, hlen, code;
-    struct ip *ip;
-    unsigned char *vjhdr, *dp;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_wsrv\n");
-	return 0;
-    }
-
-    while ((mp = getq(q)) != 0) {
-	/* assert(mp->b_datap->db_type == M_DATA) */
-#ifdef PRIOQ
-        if (!bcanputnext(q,mp->b_band))
-#else
-        if (!canputnext(q))
-#endif PRIOQ
-	{
-	    putbq(q, mp);
-	    break;
-	}
-
-	/*
-	 * First check the packet length and work out what the protocol is.
-	 */
-	len = msgdsize(mp);
-	if (len < PPP_HDRLEN) {
-	    DPRINT1("ppp_comp_wsrv: bogus short packet (%d)\n", len);
-	    freemsg(mp);
-	    cp->stats.ppp_oerrors++;
-	    putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
-	    continue;
-	}
-	proto = (MSG_BYTE(mp, 2) << 8) + MSG_BYTE(mp, 3);
-
-	/*
-	 * Make sure we've got enough data in the first mblk
-	 * and that we are its only user.
-	 */
-	if (proto == PPP_CCP)
-	    hlen = len;
-	else if (proto == PPP_IP)
-	    hlen = PPP_HDRLEN + MAX_IPHDR;
-	else
-	    hlen = PPP_HDRLEN;
-	if (hlen > len)
-	    hlen = len;
-	if (mp->b_wptr < mp->b_rptr + hlen || mp->b_datap->db_ref > 1) {
-	    PULLUP(mp, hlen);
-	    if (mp == 0) {
-		DPRINT1("ppp_comp_wsrv: pullup failed (%d)\n", hlen);
-		cp->stats.ppp_oerrors++;
-		putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
-		continue;
-	    }
-	}
-
-	/*
-	 * Do VJ compression if requested.
-	 */
-	if (proto == PPP_IP && (cp->flags & COMP_VJC)) {
-	    ip = (struct ip *) (mp->b_rptr + PPP_HDRLEN);
-	    if (ip->ip_p == IPPROTO_TCP) {
-		type = vj_compress_tcp(ip, len - PPP_HDRLEN, &cp->vj_comp,
-				       (cp->flags & COMP_VJCCID), &vjhdr);
-		switch (type) {
-		case TYPE_UNCOMPRESSED_TCP:
-		    mp->b_rptr[3] = proto = PPP_VJC_UNCOMP;
-		    break;
-		case TYPE_COMPRESSED_TCP:
-		    dp = vjhdr - PPP_HDRLEN;
-		    dp[1] = mp->b_rptr[1]; /* copy control field */
-		    dp[0] = mp->b_rptr[0]; /* copy address field */
-		    dp[2] = 0;		   /* set protocol field */
-		    dp[3] = proto = PPP_VJC_COMP;
-		    mp->b_rptr = dp;
-		    break;
-		}
-	    }
-	}
-
-	/*
-	 * Do packet compression if enabled.
-	 */
-	if (proto == PPP_CCP)
-	    ppp_comp_ccp(q, mp, 0);
-	else if (proto != PPP_LCP && (cp->flags & CCP_COMP_RUN)
-		 && cp->xstate != NULL) {
-	    len = msgdsize(mp);
-	    (*cp->xcomp->compress)(cp->xstate, &cmp, mp, len,
-			(cp->flags & CCP_ISUP? cp->mtu + PPP_HDRLEN: 0));
-	    if (cmp != NULL) {
-#ifdef PRIOQ
-		cmp->b_band=mp->b_band;
-#endif PRIOQ
-		freemsg(mp);
-		mp = cmp;
-	    }
-	}
-
-	/*
-	 * Do address/control and protocol compression if enabled.
-	 */
-	if ((cp->flags & COMP_AC)
-	    && !(proto == PPP_LCP && LCP_USE_DFLT(mp))) {
-	    mp->b_rptr += 2;	/* drop the address & ctrl fields */
-	    if (proto < 0x100 && (cp->flags & COMP_PROT))
-		++mp->b_rptr;	/* drop the high protocol byte */
-	} else if (proto < 0x100 && (cp->flags & COMP_PROT)) {
-	    /* shuffle up the address & ctrl fields */
-	    mp->b_rptr[2] = mp->b_rptr[1];
-	    mp->b_rptr[1] = mp->b_rptr[0];
-	    ++mp->b_rptr;
-	}
-
-	cp->stats.ppp_opackets++;
-	cp->stats.ppp_obytes += msgdsize(mp);
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-static int
-ppp_comp_rput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    comp_state_t *cp;
-    struct iocblk *iop;
-    struct ppp_stats *psp;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_rput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-
-    case M_DATA:
-	putq(q, mp);
-	break;
-
-    case M_IOCACK:
-	iop = (struct iocblk *) mp->b_rptr;
-	switch (iop->ioc_cmd) {
-	case PPPIO_GETSTAT:
-	    /*
-	     * Catch this on the way back from the ppp_ahdl module
-	     * so we can fill in the VJ stats.
-	     */
-	    if (mp->b_cont == 0 || iop->ioc_count != sizeof(struct ppp_stats))
-		break;
-	    psp = (struct ppp_stats *) mp->b_cont->b_rptr;
-	    psp->vj = cp->vj_comp.stats;
-	    break;
-	}
-	putnext(q, mp);
-	break;
-
-    case M_CTL:
-	switch (mp->b_rptr[0]) {
-	case PPPCTL_IERROR:
-	    ++cp->stats.ppp_ierrors;
-	    break;
-	case PPPCTL_OERROR:
-	    ++cp->stats.ppp_oerrors;
-	    break;
-	}
-	putnext(q, mp);
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-static int
-ppp_comp_rsrv(q)
-    queue_t *q;
-{
-    int proto, rv, i;
-    mblk_t *mp, *dmp = NULL, *np;
-    uchar_t *dp, *iphdr;
-    comp_state_t *cp;
-    int len, hlen, vjlen;
-    u_int iphlen;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_rsrv\n");
-	return 0;
-    }
-
-    while ((mp = getq(q)) != 0) {
-	/* assert(mp->b_datap->db_type == M_DATA) */
-	if (!canputnext(q)) {
-	    putbq(q, mp);
-	    break;
-	}
-
-	len = msgdsize(mp);
-	cp->stats.ppp_ibytes += len;
-	cp->stats.ppp_ipackets++;
-
-	/*
-	 * First work out the protocol and where the PPP header ends.
-	 */
-	i = 0;
-	proto = MSG_BYTE(mp, 0);
-	if (proto == PPP_ALLSTATIONS) {
-	    i = 2;
-	    proto = MSG_BYTE(mp, 2);
-	}
-	if ((proto & 1) == 0) {
-	    ++i;
-	    proto = (proto << 8) + MSG_BYTE(mp, i);
-	}
-	hlen = i + 1;
-
-	/*
-	 * Now reconstruct a complete, contiguous PPP header at the
-	 * start of the packet.
-	 */
-	if (hlen < ((cp->flags & DECOMP_AC)? 0: 2)
-	           + ((cp->flags & DECOMP_PROT)? 1: 2)) {
-	    /* count these? */
-	    goto bad;
-	}
-	if (mp->b_rptr + hlen > mp->b_wptr) {
-	    adjmsg(mp, hlen);	/* XXX check this call */
-	    hlen = 0;
-	}
-	if (hlen != PPP_HDRLEN) {
-	    /*
-	     * We need to put some bytes on the front of the packet
-	     * to make a full-length PPP header.
-	     * If we can put them in *mp, we do, otherwise we
-	     * tack another mblk on the front.
-	     * XXX we really shouldn't need to carry around
-	     * the address and control at this stage.
-	     */
-	    dp = mp->b_rptr + hlen - PPP_HDRLEN;
-	    if (dp < mp->b_datap->db_base || mp->b_datap->db_ref > 1) {
-		np = allocb(PPP_HDRLEN, BPRI_MED);
-		if (np == 0)
-		    goto bad;
-		np->b_cont = mp;
-		mp->b_rptr += hlen;
-		mp = np;
-		dp = mp->b_wptr;
-		mp->b_wptr += PPP_HDRLEN;
-	    } else
-		mp->b_rptr = dp;
-
-	    dp[0] = PPP_ALLSTATIONS;
-	    dp[1] = PPP_UI;
-	    dp[2] = proto >> 8;
-	    dp[3] = proto;
-	}
-
-	/*
-	 * Now see if we have a compressed packet to decompress,
-	 * or a CCP packet to take notice of.
-	 */
-	proto = PPP_PROTOCOL(mp->b_rptr);
-	if (proto == PPP_CCP) {
-	    len = msgdsize(mp);
-	    if (mp->b_wptr < mp->b_rptr + len) {
-		PULLUP(mp, len);
-		if (mp == 0)
-		    goto bad;
-	    }
-	    ppp_comp_ccp(q, mp, 1);
-	} else if (proto == PPP_COMP) {
-	    if ((cp->flags & CCP_ISUP)
-		&& (cp->flags & CCP_DECOMP_RUN) && cp->rstate
-		&& (cp->flags & CCP_ERR) == 0) {
-		rv = (*cp->rcomp->decompress)(cp->rstate, mp, &dmp);
-		switch (rv) {
-		case DECOMP_OK:
-		    freemsg(mp);
-		    mp = dmp;
-		    if (mp == NULL) {
-			/* no error, but no packet returned either. */
-			continue;
-		    }
-		    break;
-		case DECOMP_ERROR:
-		    cp->flags |= CCP_ERROR;
-		    ++cp->stats.ppp_ierrors;
-		    putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-		    break;
-		case DECOMP_FATALERROR:
-		    cp->flags |= CCP_FATALERROR;
-		    ++cp->stats.ppp_ierrors;
-		    putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-		    break;
-		}
-	    }
-	} else if (cp->rstate && (cp->flags & CCP_DECOMP_RUN)) {
-	    (*cp->rcomp->incomp)(cp->rstate, mp);
-	}
-
-	/*
-	 * Now do VJ decompression.
-	 */
-	proto = PPP_PROTOCOL(mp->b_rptr);
-	if (proto == PPP_VJC_COMP || proto == PPP_VJC_UNCOMP) {
-	    len = msgdsize(mp) - PPP_HDRLEN;
-	    if ((cp->flags & DECOMP_VJC) == 0 || len <= 0)
-		goto bad;
-
-	    /*
-	     * Advance past the ppp header.
-	     * Here we assume that the whole PPP header is in the first mblk.
-	     */
-	    np = mp;
-	    dp = np->b_rptr + PPP_HDRLEN;
-	    if (dp >= mp->b_wptr) {
-		np = np->b_cont;
-		dp = np->b_rptr;
-	    }
-
-	    /*
-	     * Make sure we have sufficient contiguous data at this point.
-	     */
-	    hlen = (proto == PPP_VJC_COMP)? MAX_VJHDR: MAX_IPHDR;
-	    if (hlen > len)
-		hlen = len;
-	    if (np->b_wptr < dp + hlen || np->b_datap->db_ref > 1) {
-		PULLUP(mp, hlen + PPP_HDRLEN);
-		if (mp == 0)
-		    goto bad;
-		np = mp;
-		dp = np->b_rptr + PPP_HDRLEN;
-	    }
-
-	    if (proto == PPP_VJC_COMP) {
-		/*
-		 * Decompress VJ-compressed packet.
-		 * First reset compressor if an input error has occurred.
-		 */
-		if (cp->stats.ppp_ierrors != cp->vj_last_ierrors) {
-		    if (cp->flags & DBGLOG)
-			DPRINT1("ppp%d: resetting VJ\n", cp->unit);
-		    vj_uncompress_err(&cp->vj_comp);
-		    cp->vj_last_ierrors = cp->stats.ppp_ierrors;
-		}
-
-		vjlen = vj_uncompress_tcp(dp, np->b_wptr - dp, len,
-					  &cp->vj_comp, &iphdr, &iphlen);
-		if (vjlen < 0) {
-		    if (cp->flags & DBGLOG)
-			DPRINT2("ppp%d: vj_uncomp_tcp failed, pkt len %d\n",
-				cp->unit, len);
-		    ++cp->vj_last_ierrors;  /* so we don't reset next time */
-		    goto bad;
-		}
-
-		/* drop ppp and vj headers off */
-		if (mp != np) {
-		    freeb(mp);
-		    mp = np;
-		}
-		mp->b_rptr = dp + vjlen;
-
-		/* allocate a new mblk for the ppp and ip headers */
-		if ((np = allocb(iphlen + PPP_HDRLEN + 4, BPRI_MED)) == 0)
-		    goto bad;
-		dp = np->b_rptr;	/* prepend mblk with TCP/IP hdr */
-		dp[0] = PPP_ALLSTATIONS; /* reconstruct PPP header */
-		dp[1] = PPP_UI;
-		dp[2] = PPP_IP >> 8;
-		dp[3] = PPP_IP;
-		bcopy((caddr_t)iphdr, (caddr_t)dp + PPP_HDRLEN, iphlen);
-		np->b_wptr = dp + iphlen + PPP_HDRLEN;
-		np->b_cont = mp;
-
-		/* XXX there seems to be a bug which causes panics in strread
-		   if we make an mbuf with only the IP header in it :-( */
-		if (mp->b_wptr - mp->b_rptr > 4) {
-		    bcopy((caddr_t)mp->b_rptr, (caddr_t)np->b_wptr, 4);
-		    mp->b_rptr += 4;
-		    np->b_wptr += 4;
-		} else {
-		    bcopy((caddr_t)mp->b_rptr, (caddr_t)np->b_wptr,
-			  mp->b_wptr - mp->b_rptr);
-		    np->b_wptr += mp->b_wptr - mp->b_rptr;
-		    np->b_cont = mp->b_cont;
-		    freeb(mp);
-		}
-
-		mp = np;
-
-	    } else {
-		/*
-		 * "Decompress" a VJ-uncompressed packet.
-		 */
-		cp->vj_last_ierrors = cp->stats.ppp_ierrors;
-		if (!vj_uncompress_uncomp(dp, hlen, &cp->vj_comp)) {
-		    if (cp->flags & DBGLOG)
-			DPRINT2("ppp%d: vj_uncomp_uncomp failed, pkt len %d\n",
-				cp->unit, len);
-		    ++cp->vj_last_ierrors;  /* don't need to reset next time */
-		    goto bad;
-		}
-		mp->b_rptr[3] = PPP_IP;	/* fix up the PPP protocol field */
-	    }
-	}
-
-	putnext(q, mp);
-	continue;
-
-    bad:
-	if (mp != 0)
-	    freemsg(mp);
-	cp->stats.ppp_ierrors++;
-	putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-    }
-
-    return 0;
-}
-
-/*
- * Handle a CCP packet being sent or received.
- * Here all the data in the packet is in a single mbuf.
- */
-static void
-ppp_comp_ccp(q, mp, rcvd)
-    queue_t *q;
-    mblk_t *mp;
-    int rcvd;
-{
-    int len, clen;
-    comp_state_t *cp;
-    unsigned char *dp;
-
-    len = msgdsize(mp);
-    if (len < PPP_HDRLEN + CCP_HDRLEN)
-	return;
-
-    cp = (comp_state_t *) q->q_ptr;
-    dp = mp->b_rptr + PPP_HDRLEN;
-    len -= PPP_HDRLEN;
-    clen = CCP_LENGTH(dp);
-    if (clen > len)
-	return;
-
-    switch (CCP_CODE(dp)) {
-    case CCP_CONFREQ:
-    case CCP_TERMREQ:
-    case CCP_TERMACK:
-	cp->flags &= ~CCP_ISUP;
-	break;
-
-    case CCP_CONFACK:
-	if ((cp->flags & (CCP_ISOPEN | CCP_ISUP)) == CCP_ISOPEN
-	    && clen >= CCP_HDRLEN + CCP_OPT_MINLEN
-	    && clen >= CCP_HDRLEN + CCP_OPT_LENGTH(dp + CCP_HDRLEN)) {
-	    if (!rcvd) {
-		if (cp->xstate != NULL
-		    && (*cp->xcomp->comp_init)
-		        (cp->xstate, dp + CCP_HDRLEN, clen - CCP_HDRLEN,
-			 cp->unit, 0, ((cp->flags & DBGLOG) != 0)))
-		    cp->flags |= CCP_COMP_RUN;
-	    } else {
-		if (cp->rstate != NULL
-		    && (*cp->rcomp->decomp_init)
-		        (cp->rstate, dp + CCP_HDRLEN, clen - CCP_HDRLEN,
-			 cp->unit, 0, cp->mru, ((cp->flags & DBGLOG) != 0)))
-		    cp->flags = (cp->flags & ~CCP_ERR) | CCP_DECOMP_RUN;
-	    }
-	}
-	break;
-
-    case CCP_RESETACK:
-	if (cp->flags & CCP_ISUP) {
-	    if (!rcvd) {
-		if (cp->xstate && (cp->flags & CCP_COMP_RUN))
-		    (*cp->xcomp->comp_reset)(cp->xstate);
-	    } else {
-		if (cp->rstate && (cp->flags & CCP_DECOMP_RUN)) {
-		    (*cp->rcomp->decomp_reset)(cp->rstate);
-		    cp->flags &= ~CCP_ERROR;
-		}
-	    }
-	}
-	break;
-    }
-}
-
-#if 0
-dump_msg(mp)
-    mblk_t *mp;
-{
-    dblk_t *db;
-
-    while (mp != 0) {
-	db = mp->b_datap;
-	DPRINT2("mp=%x cont=%x ", mp, mp->b_cont);
-	DPRINT3("rptr=%x wptr=%x datap=%x\n", mp->b_rptr, mp->b_wptr, db);
-	DPRINT2("  base=%x lim=%x", db->db_base, db->db_lim);
-	DPRINT2(" ref=%d type=%d\n", db->db_ref, db->db_type);
-	mp = mp->b_cont;
-    }
-}
-#endif
-
-static int
-msg_byte(mp, i)
-    mblk_t *mp;
-    unsigned int i;
-{
-    while (mp != 0 && i >= mp->b_wptr - mp->b_rptr)
-	mp = mp->b_cont;
-    if (mp == 0)
-	return -1;
-    return mp->b_rptr[i];
-}
diff --git a/mdk-stage1/ppp/solaris/ppp_comp_mod.c b/mdk-stage1/ppp/solaris/ppp_comp_mod.c
deleted file mode 100644
index 83ff8e252..000000000
--- a/mdk-stage1/ppp/solaris/ppp_comp_mod.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * ppp_comp_mod.c - modload support for PPP compression STREAMS module.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2.
- */
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-
-extern struct streamtab ppp_compinfo;
-
-static struct fmodsw fsw = {
-    "ppp_comp",
-    &ppp_compinfo,
-    D_NEW | D_MP | D_MTQPAIR
-};
-
-extern struct mod_ops mod_strmodops;
-
-static struct modlstrmod modlstrmod = {
-    &mod_strmodops,
-    "PPP compression module",
-    &fsw
-};
-
-static struct modlinkage modlinkage = {
-    MODREV_1,
-    (void *) &modlstrmod,
-    NULL
-};
-
-/*
- * Entry points for modloading.
- */
-int
-_init(void)
-{
-    return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
-    return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
-    struct modinfo *mip;
-{
-    return mod_info(&modlinkage, mip);
-}
diff --git a/mdk-stage1/ppp/solaris/ppp_mod.c b/mdk-stage1/ppp/solaris/ppp_mod.c
deleted file mode 100644
index a4b1538a5..000000000
--- a/mdk-stage1/ppp/solaris/ppp_mod.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * ppp_mod.c - modload support for PPP pseudo-device driver.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-#include <sys/ksynch.h>
-
-#ifdef __STDC__
-#define __P(x)	x
-#else
-#define __P(x)	()
-#endif
-
-static int ppp_identify __P((dev_info_t *));
-static int ppp_attach __P((dev_info_t *, ddi_attach_cmd_t));
-static int ppp_detach __P((dev_info_t *, ddi_detach_cmd_t));
-static int ppp_devinfo __P((dev_info_t *, ddi_info_cmd_t, void *, void **));
-
-extern struct streamtab pppinfo;
-extern krwlock_t ppp_lower_lock;
-
-static dev_info_t *ppp_dip;
-
-static struct cb_ops cb_ppp_ops = {
-    nulldev, nulldev, nodev, nodev,	/* cb_open, ... */
-    nodev, nodev, nodev, nodev,		/* cb_dump, ... */
-    nodev, nodev, nodev, nochpoll,	/* cb_devmap, ... */
-    ddi_prop_op,			/* cb_prop_op */
-    &pppinfo,				/* cb_stream */
-    D_NEW|D_MP|D_MTQPAIR|D_MTOUTPERIM|D_MTOCEXCL	/* cb_flag */
-};
-
-static struct dev_ops ppp_ops = {
-    DEVO_REV,				/* devo_rev */
-    0,					/* devo_refcnt */
-    ppp_devinfo,			/* devo_getinfo */
-    ppp_identify,			/* devo_identify */
-    nulldev,				/* devo_probe */
-    ppp_attach,				/* devo_attach */
-    ppp_detach,				/* devo_detach */
-    nodev,				/* devo_reset */
-    &cb_ppp_ops,			/* devo_cb_ops */
-    NULL				/* devo_bus_ops */
-};
-
-/*
- * Module linkage information
- */
-
-static struct modldrv modldrv = {
-    &mod_driverops,			/* says this is a pseudo driver */
-    "PPP-2.3 multiplexing driver",
-    &ppp_ops				/* driver ops */
-};
-
-static struct modlinkage modlinkage = {
-    MODREV_1,
-    (void *) &modldrv,
-    NULL
-};
-
-int
-_init(void)
-{
-    return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
-    return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
-    struct modinfo *mip;
-{
-    return mod_info(&modlinkage, mip);
-}
-
-static int
-ppp_identify(dip)
-    dev_info_t *dip;
-{
-    return strcmp(ddi_get_name(dip), "ppp") == 0? DDI_IDENTIFIED:
-	DDI_NOT_IDENTIFIED;
-}
-
-static int
-ppp_attach(dip, cmd)
-    dev_info_t *dip;
-    ddi_attach_cmd_t cmd;
-{
-
-    if (cmd != DDI_ATTACH)
-	return DDI_FAILURE;
-    if (ddi_create_minor_node(dip, "ppp", S_IFCHR, 0, DDI_PSEUDO, CLONE_DEV)
-	== DDI_FAILURE) {
-	ddi_remove_minor_node(dip, NULL);
-	return DDI_FAILURE;
-    }
-    rw_init(&ppp_lower_lock, NULL, RW_DRIVER, NULL);
-    return DDI_SUCCESS;
-}
-
-static int
-ppp_detach(dip, cmd)
-    dev_info_t *dip;
-    ddi_detach_cmd_t cmd;
-{
-    rw_destroy(&ppp_lower_lock);
-    ddi_remove_minor_node(dip, NULL);
-    return DDI_SUCCESS;
-}
-
-static int
-ppp_devinfo(dip, cmd, arg, result)
-    dev_info_t *dip;
-    ddi_info_cmd_t cmd;
-    void *arg;
-    void **result;
-{
-    int error;
-
-    error = DDI_SUCCESS;
-    switch (cmd) {
-    case DDI_INFO_DEVT2DEVINFO:
-	if (ppp_dip == NULL)
-	    error = DDI_FAILURE;
-	else
-	    *result = (void *) ppp_dip;
-	break;
-    case DDI_INFO_DEVT2INSTANCE:
-	*result = NULL;
-	break;
-    default:
-	error = DDI_FAILURE;
-    }
-    return error;
-}
diff --git a/mdk-stage1/ppp/solaris/ppp_mod.h b/mdk-stage1/ppp/solaris/ppp_mod.h
deleted file mode 100644
index f0af00886..000000000
--- a/mdk-stage1/ppp/solaris/ppp_mod.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Miscellaneous definitions for PPP STREAMS modules.
- */
-
-/*
- * Macros for allocating and freeing kernel memory.
- */
-#ifdef SVR4			/* SVR4, including Solaris 2 */
-#include <sys/kmem.h>
-#define ALLOC_SLEEP(n)		kmem_alloc((n), KM_SLEEP)
-#define ALLOC_NOSLEEP(n)	kmem_alloc((n), KM_NOSLEEP)
-#define FREE(p, n)		kmem_free((p), (n))
-#endif
-
-#ifdef SUNOS4
-#include <sys/kmem_alloc.h>	/* SunOS 4.x */
-#define ALLOC_SLEEP(n)		kmem_alloc((n), KMEM_SLEEP)
-#define ALLOC_NOSLEEP(n)	kmem_alloc((n), KMEM_NOSLEEP)
-#define FREE(p, n)		kmem_free((p), (n))
-#define NOTSUSER()		(suser()? 0: EPERM)
-#define bcanputnext(q, band)	canputnext((q))
-#endif /* SunOS 4 */
-
-#ifdef __osf__
-#include <sys/malloc.h>
-
-/* caution: this mirrors macros in sys/malloc.h, and uses interfaces
- * which are subject to change.
- * The problems are that:
- *     - the official MALLOC macro wants the lhs of the assignment as an argument,
- *	 and it takes care of the assignment itself (yuck.)
- *     - PPP insists on using "FREE" which conflicts with a macro of the same name.
- *
- */
-#ifdef BUCKETINDX /* V2.0 */
-#define ALLOC_SLEEP(n)		(void *)malloc((u_long)(n), BUCKETP(n), M_DEVBUF, M_WAITOK)
-#define ALLOC_NOSLEEP(n)	(void *)malloc((u_long)(n), BUCKETP(n), M_DEVBUF, M_NOWAIT)
-#else
-#define ALLOC_SLEEP(n)		(void *)malloc((u_long)(n), BUCKETINDEX(n), M_DEVBUF, M_WAITOK)
-#define ALLOC_NOSLEEP(n)	(void *)malloc((u_long)(n), BUCKETINDEX(n), M_DEVBUF, M_NOWAIT)
-#endif
-
-#define bcanputnext(q, band)	canputnext((q))
-
-#ifdef FREE
-#undef FREE
-#endif
-#define FREE(p, n)		free((void *)(p), M_DEVBUF)
-
-#define NO_DLPI 1
-
-#ifndef IFT_PPP
-#define IFT_PPP 0x17
-#endif
-
-#include <sys/proc.h>
-#define NOTSUSER()		(suser(u.u_procp->p_rcred, &u.u_acflag) ? EPERM : 0)
-
-/* #include "ppp_osf.h" */
-
-#endif /* __osf__ */
-
-#ifdef AIX4
-#define ALLOC_SLEEP(n)		xmalloc((n), 0, pinned_heap)	/* AIX V4.x */
-#define ALLOC_NOSLEEP(n)	xmalloc((n), 0, pinned_heap)	/* AIX V4.x */
-#define FREE(p, n)		xmfree((p), pinned_heap)
-#define NOTSUSER()		(suser()? 0: EPERM)
-#endif /* AIX */
-
-/*
- * Macros for printing debugging stuff.
- */
-#ifdef DEBUG
-#if defined(SVR4) || defined(__osf__)
-#if defined(SNI)
-#include <sys/strlog.h>
-#define STRLOG_ID		4712
-#define DPRINT(f)		strlog(STRLOG_ID, 0, 0, SL_TRACE, f)
-#define DPRINT1(f, a1)		strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1)
-#define DPRINT2(f, a1, a2)	strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1, a2)
-#define DPRINT3(f, a1, a2, a3)	strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1, a2, a3)
-#else
-#define DPRINT(f)		cmn_err(CE_CONT, f)
-#define DPRINT1(f, a1)		cmn_err(CE_CONT, f, a1)
-#define DPRINT2(f, a1, a2)	cmn_err(CE_CONT, f, a1, a2)
-#define DPRINT3(f, a1, a2, a3)	cmn_err(CE_CONT, f, a1, a2, a3)
-#endif /* SNI */
-#else
-#define DPRINT(f)		printf(f)
-#define DPRINT1(f, a1)		printf(f, a1)
-#define DPRINT2(f, a1, a2)	printf(f, a1, a2)
-#define DPRINT3(f, a1, a2, a3)	printf(f, a1, a2, a3)
-#endif /* SVR4 or OSF */
-
-#else
-#define DPRINT(f)		0
-#define DPRINT1(f, a1)		0
-#define DPRINT2(f, a1, a2)	0
-#define DPRINT3(f, a1, a2, a3)	0
-#endif /* DEBUG */
-
-#ifndef SVR4
-typedef unsigned char uchar_t;
-typedef unsigned short ushort_t;
-#ifndef __osf__
-typedef int minor_t;
-#endif
-#endif
-
-/*
- * If we don't have multithreading support, define substitutes.
- */
-#ifndef D_MP
-# define qprocson(q)
-# define qprocsoff(q)
-# define put(q, mp)	((*(q)->q_qinfo->qi_putp)((q), (mp)))
-# define canputnext(q)	canput((q)->q_next)
-# define qwriter(q, mp, func, scope)	(func)((q), (mp))
-#endif
-
-#ifdef D_MP
-/* Use msgpullup if we have other multithreading support. */
-#define PULLUP(mp, len)				\
-    do {					\
-	mblk_t *np = msgpullup((mp), (len));	\
-	freemsg((mp));				\
-	mp = np;				\
-    } while (0)
-
-#else
-/* Use pullupmsg if we don't have any multithreading support. */
-#define PULLUP(mp, len)			\
-    do {				\
-	if (!pullupmsg((mp), (len))) {	\
-	    freemsg((mp));		\
-	    mp = 0;			\
-	}				\
-    } while (0)
-#endif
-
-/*
- * How to declare the open and close procedures for a module.
- */
-#ifdef SVR4
-#define MOD_OPEN_DECL(name)	\
-static int name __P((queue_t *, dev_t *, int, int, cred_t *))
-
-#define MOD_CLOSE_DECL(name)	\
-static int name __P((queue_t *, int, cred_t *))
-
-#define MOD_OPEN(name)				\
-static int name(q, devp, flag, sflag, credp)	\
-    queue_t *q;					\
-    dev_t *devp;				\
-    int flag, sflag;				\
-    cred_t *credp;
-
-#define MOD_CLOSE(name)		\
-static int name(q, flag, credp)	\
-    queue_t *q;			\
-    int flag;			\
-    cred_t *credp;
-
-#define OPEN_ERROR(x)		return (x)
-#define DRV_OPEN_OK(dev)	return 0
-
-#define NOTSUSER()		(drv_priv(credp))
-
-#else	/* not SVR4 */
-#define MOD_OPEN_DECL(name)	\
-static int name __P((queue_t *, int, int, int))
-
-#define MOD_CLOSE_DECL(name)	\
-static int name __P((queue_t *, int))
-
-#define MOD_OPEN(name)		\
-static int name(q, dev, flag, sflag)	\
-    queue_t *q;				\
-    int dev;				\
-    int flag, sflag;
-
-#define MOD_CLOSE(name)		\
-static int name(q, flag)	\
-    queue_t *q;			\
-    int flag;
-
-#define OPEN_ERROR(x)		{ u.u_error = (x); return OPENFAIL; }
-#define DRV_OPEN_OK(dev)	return (dev)
-
-#endif	/* SVR4 */
diff --git a/mdk-stage1/ppp/sunos4/Makedefs b/mdk-stage1/ppp/sunos4/Makedefs
deleted file mode 100644
index 8b56a2b67..000000000
--- a/mdk-stage1/ppp/sunos4/Makedefs
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# defines common to several Makefiles
-#
-
-INSTALL= install -o root -g daemon
-
-BINDIR = /usr/local/etc
-MANDIR = /usr/local/man
-ETCDIR = /etc/ppp
-
-# To use gcc, uncomment the next line.
-#CC = gcc
-COPTS = -O
diff --git a/mdk-stage1/ppp/sunos4/Makefile b/mdk-stage1/ppp/sunos4/Makefile
deleted file mode 100644
index 701e24e14..000000000
--- a/mdk-stage1/ppp/sunos4/Makefile
+++ /dev/null
@@ -1,57 +0,0 @@
-#
-# Makefile for STREAMS modules for SunOS 4.
-#
-# $Id$
-#
-
-include Makedefs
-
-LD = /usr/bin/ld		# make sure we don't get gnu ld
-
-# Defining __$(ARCH)__ is for gcc's broken version of sun/vddrv.h.
-ARCH = `/bin/arch -k`
-DEFINES= -DKERNEL -D_KERNEL -DSUNOS4 -D$(ARCH) -D__$(ARCH)__ \
-	 -DDEBUG -DNO_DLPI -DSNIT_SUPPORT
-CFLAGS= $(DEFINES) -I../include $(COPTS)
-
-MODULES= ppp_mod.o ppp_ahdl_mod.o ppp_comp_mod.o if_ppp_mod.o
-
-all:	$(MODULES)
-
-ppp_mod.o:	ppp.o ppp_vdcmd.o
-	$(LD) -r -o ppp_mod.o ppp.o ppp_vdcmd.o
-
-ppp_ahdl_mod.o: ppp_ahdlc.o ppp_ahdlc_vdcmd.o
-	$(LD) -r -o ppp_ahdl_mod.o ppp_ahdlc.o ppp_ahdlc_vdcmd.o
-
-COMP_OBJS = ppp_comp.o bsd-comp.o deflate.o zlib.o vjcompress.o \
-	ppp_comp_vdcmd.o
-ppp_comp_mod.o: $(COMP_OBJS)
-	$(LD) -r -o $@ $(COMP_OBJS)
-
-if_ppp.o: ../modules/if_ppp.c
-	$(CC) $(CFLAGS) -c $?
-bsd-comp.o: ../modules/bsd-comp.c
-	$(CC) $(CFLAGS) -c $?
-deflate.o: ../modules/deflate.c
-	$(CC) $(CFLAGS) -c $?
-ppp.o:	../modules/ppp.c
-	$(CC) $(CFLAGS) -c $?
-ppp_ahdlc.o: ../modules/ppp_ahdlc.c
-	$(CC) $(CFLAGS) -c $?
-ppp_comp.o: ../modules/ppp_comp.c
-	$(CC) $(CFLAGS) -c $?
-vjcompress.o: ../modules/vjcompress.c
-	$(CC) $(CFLAGS) -c $?
-zlib.o:	../common/zlib.c
-	$(CC) $(CFLAGS) -c $?
-
-if_ppp_mod.o:	if_ppp.o if_ppp_vdcmd.o
-	$(LD) -r -o if_ppp_mod.o if_ppp.o if_ppp_vdcmd.o
-
-install: all
-	$(INSTALL) $(MODULES) $(BINDIR)
-	./ppp.INSTALL
-
-clean:
-	rm -f ppp ppp_comp ppp_ahdl *.o *~ core
diff --git a/mdk-stage1/ppp/sunos4/Makefile.top b/mdk-stage1/ppp/sunos4/Makefile.top
deleted file mode 100644
index c86e0884d..000000000
--- a/mdk-stage1/ppp/sunos4/Makefile.top
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-# ppp top level makefile
-#
-
-include sunos4/Makedefs
-
-all:
-	cd chat; $(MAKE) all
-	cd pppd; $(MAKE) all
-	cd pppstats; $(MAKE) all
-	cd sunos4; $(MAKE) all
-	cd pppdump; $(MAKE) all
-
-install: $(BINDIR) $(MANDIR)/man8 install-progs install-etcppp
-
-install-progs:
-	cd chat; $(MAKE) install
-	cd pppd; $(MAKE) install
-	cd pppstats; $(MAKE) install
-	cd pppdump; $(MAKE) install
-	cd sunos4; $(MAKE) install
-
-install-etcppp: $(ETCDIR) $(ETCDIR)/options $(ETCDIR)/pap-secrets \
-	$(ETCDIR)/chap-secrets
-
-$(ETCDIR)/options:
-	$(INSTALL) -c -m 644 etc.ppp/options $@
-$(ETCDIR)/pap-secrets:
-	$(INSTALL) -c -m 600 etc.ppp/pap-secrets $@
-$(ETCDIR)/chap-secrets:
-	$(INSTALL) -c -m 600 etc.ppp/chap-secrets $@
-
-$(BINDIR):
-	$(INSTALL) -d -m 755 $@
-$(MANDIR)/man8:
-	$(INSTALL) -d -m 755 $@
-$(ETCDIR):
-	$(INSTALL) -d -m 755 $@
-
-clean:
-	rm -f *~
-	cd chat; $(MAKE) clean
-	cd pppd; $(MAKE) clean
-	cd pppstats; $(MAKE) clean
-	cd sunos4; $(MAKE) clean
-
diff --git a/mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c b/mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c
deleted file mode 100644
index 2bf9710f4..000000000
--- a/mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c
+++ /dev/null
@@ -1,57 +0,0 @@
-#include <sys/types.h>
-#include <sys/errno.h>
-#include <sys/conf.h>
-#include <sun/vddrv.h>
-
-extern struct streamtab if_pppinfo;
-
-static struct vdldrv vd = {
-    VDMAGIC_USER,
-    "if_ppp"
-};
-
-static int fmodsw_index = -1;
-
-int
-if_ppp_vdcmd(fun, vdp, vdi, vds)
-    unsigned int fun;
-    struct vddrv *vdp;
-    addr_t vdi;
-    struct vdstat *vds;
-{
-    int n, error;
-
-    switch (fun) {
-    case VDLOAD:
-	vdp->vdd_vdtab = (struct vdlinkage *) &vd;
-	if (fmodsw_index >= 0)
-	    return EBUSY;
-	for (n = 0; n < fmodcnt; ++n)
-	    if (fmodsw[n].f_str == 0)
-		break;
-	if (n >= fmodcnt)
-	    return ENODEV;
-	strncpy(fmodsw[n].f_name, vd.Drv_name, FMNAMESZ+1);
-	fmodsw[n].f_str = &if_pppinfo;
-	fmodsw_index = n;
-	break;
-
-    case VDUNLOAD:
-	if (fmodsw_index <= 0)
-	    return EINVAL;
-	error = if_ppp_unload();
-	if (error != 0)
-	    return error;
-	fmodsw[fmodsw_index].f_name[0] = 0;
-	fmodsw[fmodsw_index].f_str = 0;
-	fmodsw_index = -1;
-	break;
-
-    case VDSTAT:
-	break;
-
-    default:
-	return EIO;
-    }
-    return 0;
-}
diff --git a/mdk-stage1/ppp/sunos4/ppp.INSTALL b/mdk-stage1/ppp/sunos4/ppp.INSTALL
deleted file mode 100755
index 0018bf8d0..000000000
--- a/mdk-stage1/ppp/sunos4/ppp.INSTALL
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/bin/sh
-
-# Script for loading, unloading, etc. ppp modules.
-
-moddir=/usr/local/etc
-etcppp=/etc/ppp
-
-PATH=/usr/etc:/usr/bin
-
-# Check that we're superuser
-touch /tmp/su$$
-if chown root /tmp/su$$ >/dev/null; then :
-else
-    echo "$0: must be root."
-    rm -f /tmp/su$$
-    exit 1
-fi
-rm -f /tmp/su$$
-
-case "$0" in
-*ppp.INSTALL)
-    if [ ! -f ppp.INSTALL ]; then
-	echo "ppp.INSTALL: not found"
-	exit 1
-    fi
-    for n in INSTALL LOAD UNLOAD MKDEV RMDEV; do
-	if [ -h /dev/ppp.$n -o -f /dev/ppp.$n ]; then
-	    rm /dev/ppp.$n
-	fi
-    done
-    cp ppp.INSTALL /dev
-    for n in LOAD UNLOAD MKDEV RMDEV; do
-	ln -s ppp.INSTALL /dev/ppp.$n
-    done
-    ;;
-
-*ppp.LOAD)
-    if modstat | grep -w ppp >/dev/null; then
-	echo "ppp driver is already loaded."
-	exit 1
-    fi
-    if modstat | grep -w if_ppp >/dev/null; then
-	echo "if_ppp module already loaded: not reloading."
-    else
-	echo -n "if_ppp: "
-	modload $moddir/if_ppp_mod.o -sym -entry _if_ppp_vdcmd \
-	    -o $etcppp/if_ppp_mod
-    fi
-    echo -n "ppp: "
-    modload $moddir/ppp_mod.o -sym -entry _ppp_vdcmd -exec /dev/ppp.MKDEV \
-	-o $etcppp/ppp_mod
-    echo -n "ppp_comp: "
-    modload $moddir/ppp_comp_mod.o -sym -entry _ppp_comp_vdcmd \
-	-o $etcppp/ppp_comp
-    echo -n "ppp_ahdl: "
-    modload $moddir/ppp_ahdl_mod.o -sym -entry _ppp_ahdlc_vdcmd \
-	-o $etcppp/ppp_ahdl
-    exit 0
-    ;;
-
-*ppp.MKDEV)
-    # args: module number, type, b-major, c-major
-    if [ $# -ne 4 ]; then
-	echo "Usage: $0 module-id module-type b-major c-major"
-	exit 1
-    fi
-    if [ "$2" -ne "12345607" -a "$2" -ne "12345600" ]; then
-	echo "$0: $2: bad module type"
-	exit 1
-    fi
-    rm -f /dev/ppp
-    # we "just know" that 37 is the major number of the clone driver
-    mknod /dev/ppp c 37 $4
-    chmod 644 /dev/ppp
-    exit 0
-    ;;
-
-*ppp.UNLOAD)
-    stat=0
-    if modstat | grep -w if_ppp >/dev/null; then
-	echo "$0: not unloading if_ppp module."
-    fi
-    for mod in ppp ppp_comp ppp_ahdl; do
-	id=`modstat | grep -w $mod | awk '{print $1}'`
-	if [ x$id = x ]; then
-	    echo "$mod is not loaded."
-	    stat=1
-	else
-	    modunload -id $id
-	fi
-    done
-    exit $stat
-    ;;
-
-*ppp.RMDEV)
-    rm -f /dev/ppp
-    exit 0
-    ;;
-
-*)
-    echo "Invocation names: ppp.INSTALL ppp.LOAD ppp.UNLOAD ppp.MKDEV ppp.RMDEV"
-    exit 1
-    ;;
-esac
diff --git a/mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c b/mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c
deleted file mode 100644
index 2dbe8262b..000000000
--- a/mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c
+++ /dev/null
@@ -1,57 +0,0 @@
-#include <sys/types.h>
-#include <sys/errno.h>
-#include <sys/conf.h>
-#include <sun/vddrv.h>
-
-extern struct streamtab ppp_ahdlcinfo;
-extern int ppp_ahdlc_count;
-
-static struct vdldrv vd = {
-    VDMAGIC_USER,
-    "ppp_ahdl"
-};
-
-static int fmodsw_index = -1;
-
-int
-ppp_ahdlc_vdcmd(fun, vdp, vdi, vds)
-    unsigned int fun;
-    struct vddrv *vdp;
-    addr_t vdi;
-    struct vdstat *vds;
-{
-    int n;
-
-    switch (fun) {
-    case VDLOAD:
-	vdp->vdd_vdtab = (struct vdlinkage *) &vd;
-	if (fmodsw_index >= 0)
-	    return EBUSY;
-	for (n = 0; n < fmodcnt; ++n)
-	    if (fmodsw[n].f_str == 0)
-		break;
-	if (n >= fmodcnt)
-	    return ENODEV;
-	strncpy(fmodsw[n].f_name, vd.Drv_name, FMNAMESZ+1);
-	fmodsw[n].f_str = &ppp_ahdlcinfo;
-	fmodsw_index = n;
-	break;
-
-    case VDUNLOAD:
-	if (ppp_ahdlc_count > 0)
-	    return EBUSY;
-	if (fmodsw_index <= 0)
-	    return EINVAL;
-	fmodsw[fmodsw_index].f_name[0] = 0;
-	fmodsw[fmodsw_index].f_str = 0;
-	fmodsw_index = -1;
-	break;
-
-    case VDSTAT:
-	break;
-
-    default:
-	return EIO;
-    }
-    return 0;
-}
diff --git a/mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c b/mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c
deleted file mode 100644
index b81bc47e8..000000000
--- a/mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c
+++ /dev/null
@@ -1,57 +0,0 @@
-#include <sys/types.h>
-#include <sys/errno.h>
-#include <sys/conf.h>
-#include <sun/vddrv.h>
-
-extern struct streamtab ppp_compinfo;
-extern int ppp_comp_count;
-
-static struct vdldrv vd = {
-    VDMAGIC_USER,
-    "ppp_comp"
-};
-
-static int fmodsw_index = -1;
-
-int
-ppp_comp_vdcmd(fun, vdp, vdi, vds)
-    unsigned int fun;
-    struct vddrv *vdp;
-    addr_t vdi;
-    struct vdstat *vds;
-{
-    int n;
-
-    switch (fun) {
-    case VDLOAD:
-	vdp->vdd_vdtab = (struct vdlinkage *) &vd;
-	if (fmodsw_index >= 0)
-	    return EBUSY;
-	for (n = 0; n < fmodcnt; ++n)
-	    if (fmodsw[n].f_str == 0)
-		break;
-	if (n >= fmodcnt)
-	    return ENODEV;
-	strncpy(fmodsw[n].f_name, vd.Drv_name, FMNAMESZ+1);
-	fmodsw[n].f_str = &ppp_compinfo;
-	fmodsw_index = n;
-	break;
-
-    case VDUNLOAD:
-	if (ppp_comp_count > 0)
-	    return EBUSY;
-	if (fmodsw_index <= 0)
-	    return EINVAL;
-	fmodsw[fmodsw_index].f_name[0] = 0;
-	fmodsw[fmodsw_index].f_str = 0;
-	fmodsw_index = -1;
-	break;
-
-    case VDSTAT:
-	break;
-
-    default:
-	return EIO;
-    }
-    return 0;
-}
diff --git a/mdk-stage1/ppp/sunos4/ppp_vdcmd.c b/mdk-stage1/ppp/sunos4/ppp_vdcmd.c
deleted file mode 100644
index 68095c92e..000000000
--- a/mdk-stage1/ppp/sunos4/ppp_vdcmd.c
+++ /dev/null
@@ -1,81 +0,0 @@
-#include <sys/types.h>
-#include <sys/errno.h>
-#include <sys/conf.h>
-#include <sun/vddrv.h>
-
-extern struct streamtab pppinfo;
-extern int ppp_count;
-extern int nchrdev;
-
-static struct vdldrv vd = {
-    VDMAGIC_PSEUDO,
-    "ppp"
-};
-
-extern int nodev();
-
-static struct cdevsw ppp_cdevsw = {
-    nodev, nodev, nodev, nodev, nodev, nodev, nodev, 0,
-    &pppinfo
-};
-
-static struct cdevsw old_entry;
-
-int
-ppp_vdcmd(fun, vdp, vdi, vds)
-    unsigned int fun;
-    struct vddrv *vdp;
-    addr_t vdi;
-    struct vdstat *vds;
-{
-    static int majnum = -1;
-    int n, maj;
-
-    switch (fun) {
-    case VDLOAD:
-	/*
-	 * It seems like modload doesn't install the cdevsw entry
-	 * for us.  Oh well...
-	 */
-	for (maj = 1; maj < nchrdev; ++maj)
-	    if (cdevsw[maj].d_open == vd_unuseddev)
-		break;
-	if (maj >= nchrdev)
-	    return ENODEV;
-	vd.Drv_charmajor = maj;
-	old_entry = cdevsw[maj];
-	cdevsw[maj] = ppp_cdevsw;
-	vd.Drv_cdevsw = &ppp_cdevsw;
-	vdp->vdd_vdtab = (struct vdlinkage *) &vd;
-	majnum = maj;
-	break;
-
-    case VDUNLOAD:
-	if (ppp_count > 0)
-	    return EBUSY;
-	if (vd.Drv_charmajor > 0)
-	    cdevsw[vd.Drv_charmajor] = old_entry;
-	break;
-
-    case VDSTAT:
-	/*
-	 * We have to fool the modstat command into thinking
-	 * that this module is actually a driver! This is
-	 * so that installation commands that use the -exec
-	 * option of modload to run a shell script find out
-	 * the block and/or char major numbers of the driver
-	 * loaded (so that the shell script can go off to
-	 * /dev and *MAKE* the bloody device nodes- remember
-	 * they might change from one load to another if
-	 * you don't hardwire the number!).
-	 */
-	vds->vds_magic = VDMAGIC_DRV;
-	vds->vds_modinfo[0] = (char) 0;
-	vds->vds_modinfo[1] = (char) majnum;
-	break;
-
-    default:
-	return EIO;
-    }
-    return 0;
-}
diff --git a/mdk-stage1/ppp/svr4/Makedefs b/mdk-stage1/ppp/svr4/Makedefs
deleted file mode 100644
index 81db8ab2e..000000000
--- a/mdk-stage1/ppp/svr4/Makedefs
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# defines common to several Makefiles
-#
-
-INSTALL= /usr/sbin/install
-
-BINDIR = /usr/local/bin
-MANDIR = /usr/local/man
-ETCDIR = /etc/ppp
-
-COPTS = -O -Xa
-
-# For compiling with gcc, comment out the COPTS definition above and
-# uncomment the next 2 definitions.
-#CC = gcc
-#COPTS = -O2
diff --git a/mdk-stage1/ppp/svr4/Makedefs.sol2 b/mdk-stage1/ppp/svr4/Makedefs.sol2
deleted file mode 100644
index e8b8d282e..000000000
--- a/mdk-stage1/ppp/svr4/Makedefs.sol2
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# Generic make definitions for Solaris 2
-#
-# $Id$
-#
-
-include ../svr4/Makedefs
-
-CPPFLAGS	= -D_KERNEL -DSVR4 -DSOL2 -DPRIOQ -DDEBUG -I../include
-CFLAGS		= $(CPPFLAGS) $(COPTS)
-
-# lint-specific variables
-LINT            = lint
-LINT_OPT_32     =
-LINT_OPT_64     = -Xarch=v9 -errchk=longptr64
-
-LINT_32     	=
-LINT_32     	+= -erroff=E_BAD_PTR_CAST_ALIGN
-LINT_32     	+= -erroff=E_SUPPRESSION_DIRECTIVE_UNUSED
-LINT_32     	+= -erroff=E_SUSPICIOUS_COMPARISON
-LINT_32     	+= -erroff=E_CAST_UINT_TO_SIGNED_INT
-LINT_32     	+= -erroff=E_PASS_UINT_TO_SIGNED_INT
-LINT_32     	+= -erroff=E_INVALID_ANNOTATION_NAME
-LINT_32     	+= -erroff=E_FUNC_ARG_UNUSED
-# This might be needed, but zlib.c and vjcompress.c will squawk 
-# when not ignored
-LINT_32		+= -erroff=E_CASE_FALLTHRU
-LINT_32		+= -erroff=E_RET_INT_IMPLICITLY
-LINT_32		+= -erroff=E_FUNC_NO_RET_VAL
-# Some STREAMS macros will be noisy too when this isn't ignored
-LINT_32		+= -erroff=E_CONSTANT_CONDITION
-LINT_32		+= -erroff=E_CONST_EXPR
-
-# Extra noise suppressant for 64-bit
-EXTRA_OFF 	=
-EXTRA_OFF 	+= -erroff=E_CAST_INT_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_CAST_INT_CONST_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_CAST_TO_PTR_FROM_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_INT_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_INT_FROM_BIG_CONST
-EXTRA_OFF 	+= -erroff=E_CONST_PROMOTED_UNSIGNED_LL
-EXTRA_OFF 	+= -erroff=E_CONST_PROMOTED_LONG_LONG
-EXTRA_OFF 	+= -erroff=E_CONST_TRUNCATED_BY_ASSIGN
-EXTRA_OFF 	+= -erroff=E_PASS_INT_FROM_BIG_CONST
-EXTRA_OFF 	+= -erroff=E_COMP_INT_WITH_LARGE_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_UINT_TO_SIGNED_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_NARROW_CONV
-EXTRA_OFF 	+= -erroff=E_PASS_INT_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_PTR_CONV_LOSES_BITS
-
-LINT_64     	= $(LINT_32)
-LINT_64     	+= $(EXTRA_OFF)
-
-LINTFLAGS64     = -Xa -nsxmuF -errtags=yes $(LINT_OPT_64) $(LINT_64)
-LINT64          = $(LINT) -c $(LINTFLAGS64) $(CPPFLAGS)
-
-LINTFLAGS32     = -Xa -nsxmuF -errtags=yes $(LINT_OPT_32) $(LINT_32)
-LINT32          = $(LINT) -c $(LINTFLAGS32) $(CPPFLAGS)
-
diff --git a/mdk-stage1/ppp/svr4/Makefile.sol2 b/mdk-stage1/ppp/svr4/Makefile.sol2
deleted file mode 100644
index 5b2ca8635..000000000
--- a/mdk-stage1/ppp/svr4/Makefile.sol2
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-# Makefile for STREAMS modules for Solaris 2.
-#
-# $Id$
-#
-
-include Makedefs.sol2
-
-COPTS += -xO2 -xspace -W0,-Lt
-
-COMP_OBJS = ppp_comp.o bsd-comp.o deflate.o zlib.o vjcompress.o \
-	ppp_comp_mod.o
-
-all:	ppp ppp_ahdl ppp_comp
-
-ppp:	ppp.o ppp_mod.o
-	ld -r -o $@ ppp.o ppp_mod.o
-	chmod +x $@
-
-ppp_ahdl: ppp_ahdlc.o ppp_ahdlc_mod.o
-	ld -r -o $@ ppp_ahdlc.o ppp_ahdlc_mod.o
-	chmod +x $@
-
-ppp_comp: $(COMP_OBJS)
-	ld -r -o $@ $(COMP_OBJS)
-	chmod +x $@
-
-bsd-comp.o:	../modules/bsd-comp.c
-	$(CC) $(CFLAGS) -c $?
-deflate.o:	../modules/deflate.c
-	$(CC) $(CFLAGS) -c $?
-ppp.o:	../modules/ppp.c
-	$(CC) $(CFLAGS) -c $?
-ppp_mod.o:	ppp_mod.c
-	$(CC) $(CFLAGS) -c $?
-ppp_ahdlc_mod.o: ppp_ahdlc_mod.c
-	$(CC) $(CFLAGS) -c $?
-ppp_ahdlc.o: ../modules/ppp_ahdlc.c
-	$(CC) $(CFLAGS) -c $?
-ppp_comp.o: ../modules/ppp_comp.c
-	$(CC) $(CFLAGS) -c $?
-ppp_comp_mod.o:	ppp_comp_mod.c
-	$(CC) $(CFLAGS) -c $?
-vjcompress.o:	../modules/vjcompress.c
-	$(CC) $(CFLAGS) -c $?
-zlib.o:	../common/zlib.c
-	$(CC) $(CFLAGS) -c $?
-
-install:
-	cp ppp ppp.conf /kernel/drv
-	cp ppp_comp ppp_ahdl /kernel/strmod
-	if grep clone:ppp /etc/minor_perm; then :; else \
-	  echo clone:ppp 0644 root sys >>/etc/minor_perm; fi
-	/usr/sbin/rem_drv ppp 2>/dev/null || true
-	/usr/sbin/add_drv ppp
-
-SRCS	= ../modules/ppp.c ppp_mod.c ../modules/ppp_ahdlc.c ppp_ahdlc_mod.c \
-	../modules/ppp_comp.c ../modules/bsd-comp.c ../modules/deflate.c \
-	../common/zlib.c ../modules/vjcompress.c ppp_comp_mod.c
-
-lint:
-	$(LINT32) $(SRCS)
-
-clean:
-	rm -f ppp ppp_comp ppp_ahdl *.o *~ core
-	rm -f *.ln
diff --git a/mdk-stage1/ppp/svr4/Makefile.sol2-64 b/mdk-stage1/ppp/svr4/Makefile.sol2-64
deleted file mode 100644
index 80c6b185e..000000000
--- a/mdk-stage1/ppp/svr4/Makefile.sol2-64
+++ /dev/null
@@ -1,85 +0,0 @@
-#
-# Makefile for 64-bit STREAMS modules for Solaris 2.
-#
-# $Id$
-#
-
-include Makedefs.sol2
-
-# Sun's cc flag for LP64 compilation / linkage
-COPTS 		+= -xchip=ultra -xarch=v9 -Wc,-xcode=abs32 -Wc,-Qiselect-regsym=0 -xO3 -xspace -W0,-Lt
-
-# subdirectory where 64-bit objects / binaries will be placed
-LP64DIR		= sparcv9
-
-# Name of legacy Makefile (for 32-bit binaries)
-STD_MAKE	= Makefile.sol2
-
-COMP_OBJS	= $(LP64DIR)/ppp_comp.o $(LP64DIR)/bsd-comp.o \
-		$(LP64DIR)/deflate.o $(LP64DIR)/zlib.o $(LP64DIR)/vjcompress.o \
-		$(LP64DIR)/ppp_comp_mod.o
-
-all:	std_objs $(LP64DIR) ppp ppp_ahdl ppp_comp
-
-std_objs:
-	$(MAKE) -f $(STD_MAKE) all
-
-ppp:	$(LP64DIR)/ppp.o $(LP64DIR)/ppp_mod.o
-	ld -r -o $(LP64DIR)/$@ $(LP64DIR)/ppp.o $(LP64DIR)/ppp_mod.o
-	chmod +x $(LP64DIR)/$@
-
-ppp_ahdl: $(LP64DIR)/ppp_ahdlc.o $(LP64DIR)/ppp_ahdlc_mod.o
-	ld -r -o $(LP64DIR)/$@ $(LP64DIR)/ppp_ahdlc.o $(LP64DIR)/ppp_ahdlc_mod.o
-	chmod +x $(LP64DIR)/$@
-
-ppp_comp: $(COMP_OBJS)
-	ld -r -o $(LP64DIR)/$@ $(COMP_OBJS)
-	chmod +x $(LP64DIR)/$@
-
-$(LP64DIR)/bsd-comp.o: ../modules/bsd-comp.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/deflate.o: ../modules/deflate.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp.o:	../modules/ppp.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_mod.o:	ppp_mod.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_ahdlc_mod.o: ppp_ahdlc_mod.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_ahdlc.o: ../modules/ppp_ahdlc.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_comp.o: ../modules/ppp_comp.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_comp_mod.o: ppp_comp_mod.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/vjcompress.o: ../modules/vjcompress.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/zlib.o:	../common/zlib.c
-	$(CC) $(CFLAGS) -c $? -o $@
-
-$(LP64DIR):
-	mkdir -m 755 -p $@
-
-install:
-	cp ppp ppp.conf /kernel/drv
-	cp ppp_comp ppp_ahdl /kernel/strmod
-	cp $(LP64DIR)/ppp /kernel/drv/$(LP64DIR)
-	cp $(LP64DIR)/ppp_comp $(LP64DIR)/ppp_ahdl /kernel/strmod/$(LP64DIR)
-	if grep clone:ppp /etc/minor_perm; then :; else \
-	  echo clone:ppp 0644 root sys >>/etc/minor_perm; fi
-	/usr/sbin/rem_drv ppp 2>/dev/null || true
-	/usr/sbin/add_drv ppp
-
-SRCS	= ../modules/ppp.c ppp_mod.c ../modules/ppp_ahdlc.c ppp_ahdlc_mod.c \
-	../modules/ppp_comp.c ../modules/bsd-comp.c ../modules/deflate.c \
-	../common/zlib.c ../modules/vjcompress.c ppp_comp_mod.c
-
-lint:
-	$(LINT64) $(SRCS)
-
-lint-32:
-	$(LINT32) $(SRCS)
-
-clean:
-	$(MAKE) -f $(STD_MAKE) clean
-	rm -f $(LP64DIR)/ppp $(LP64DIR)/ppp_comp $(LP64DIR)/ppp_ahdl $(LP64DIR)/*.o $(LP64DIR)/*~ $(LP64DIR)/core
diff --git a/mdk-stage1/ppp/svr4/Makefile.svr4 b/mdk-stage1/ppp/svr4/Makefile.svr4
deleted file mode 100644
index 252c52428..000000000
--- a/mdk-stage1/ppp/svr4/Makefile.svr4
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# Makefile for STREAMS modules for SVR4.
-#
-# $Id$
-#
-
-COPTS = -O
-
-CFLAGS= -D_KERNEL -DSVR4 -DLACHTCP -I../include $(COPTS)
-
-all:	ppp ppp_ahdl ppp_comp
-
-ppp:	ppp.o
-	ld -r -o $@ ppp.o
-
-ppp_ahdl: ppp_ahdlc.o
-	ld -r -o $@ ppp_ahdlc.o
-
-ppp_comp: ppp_comp.o bsd-comp.o vjcompress.o deflate.o zlib.o
-	ld -r -o $@ ppp_comp.o bsd-comp.o vjcompress.o deflate.o zlib.o
-
-bsd-comp.o: ../modules/bsd-comp.c
-	$(CC) $(CFLAGS) -c $?
-deflate.o: ../modules/deflate.c
-	$(CC) $(CFLAGS) -c $?
-ppp.o:	../modules/ppp.c
-	$(CC) $(CFLAGS) -c $?
-ppp_ahdlc.o: ../modules/ppp_ahdlc.c
-	$(CC) $(CFLAGS) -c $?
-ppp_comp.o: ../modules/ppp_comp.c
-	$(CC) $(CFLAGS) -c $?
-vjcompress.o: ../modules/vjcompress.c
-	$(CC) $(CFLAGS) -c $?
-zlib.o:	../common/zlib.c
-	$(CC) $(CFLAGS) -c $?
-
-install: all
-	cp ppp Driver.o
-	cp ppp.Master Master
-	cp ppp.System System
-	cp ppp.Node Node
-	/etc/conf/bin/idinstall -d ppp
-	/etc/conf/bin/idinstall -a ppp
-	cp ppp_comp Driver.o
-	cp ppp_comp.Master Master
-	cp ppp_comp.System System
-	/etc/conf/bin/idinstall -d ppp_comp
-	/etc/conf/bin/idinstall -a ppp_comp
-	cp ppp_ahdl Driver.o
-	cp ppp_ahdl.Master Master
-	cp ppp_ahdl.System System
-	/etc/conf/bin/idinstall -d ppp_ahdl
-	/etc/conf/bin/idinstall -a ppp_ahdl
-	@echo 
-	@echo 'NOTE: You must rebuild your kernel to incorporate the driver.'
-	@echo '(use /etc/conf/bin/idbuild)'
-	@echo
-
-clean:
-	rm -f ppp ppp_comp ppp_ahdl *.o *~ core
diff --git a/mdk-stage1/ppp/svr4/Makefile.top b/mdk-stage1/ppp/svr4/Makefile.top
deleted file mode 100644
index 253e48acb..000000000
--- a/mdk-stage1/ppp/svr4/Makefile.top
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# ppp top level makefile for SVR4 and Solaris 2
-#
-# $Id$
-#
-
-include svr4/Makedefs
-
-all:
-	cd chat; $(MAKE) all
-	cd pppd; $(MAKE) all
-	cd pppstats; $(MAKE) all
-	cd pppdump; $(MAKE) all
-	cd svr4; $(MAKE) all
-
-install: $(BINDIR) $(MANDIR)/man8 install-progs install-etcppp
-
-install-progs:
-	cd chat; $(MAKE) install
-	cd pppd; $(MAKE) install
-	cd pppstats; $(MAKE) install
-	cd pppdump; $(MAKE) install
-	cd svr4; $(MAKE) install
-
-install-etcppp: $(ETCDIR) $(ETCDIR)/options $(ETCDIR)/pap-secrets \
-	$(ETCDIR)/chap-secrets
-
-$(ETCDIR)/options:
-	cp etc.ppp/options $@
-	chmod go-w $@
-$(ETCDIR)/pap-secrets:
-	$(INSTALL) -f $(ETCDIR) -m 600 etc.ppp/pap-secrets
-$(ETCDIR)/chap-secrets:
-	$(INSTALL) -f $(ETCDIR) -m 600 etc.ppp/chap-secrets
-
-$(BINDIR):
-	mkdir -m 755 -p $@
-$(MANDIR)/man8:
-	mkdir -m 755 -p $@
-$(ETCDIR):
-	mkdir -m 755 -p $@
-
-clean:
-	rm -f *~
-	cd chat; $(MAKE) clean
-	cd pppd; $(MAKE) clean
-	cd pppstats; $(MAKE) clean
-	cd pppdump; $(MAKE) clean
-	cd svr4; $(MAKE) clean
-
diff --git a/mdk-stage1/ppp/svr4/ppp.Master b/mdk-stage1/ppp/svr4/ppp.Master
deleted file mode 100644
index 346db035b..000000000
--- a/mdk-stage1/ppp/svr4/ppp.Master
+++ /dev/null
@@ -1 +0,0 @@
-ppp	-	Sciof	ppp	0	0	1	128	-1
diff --git a/mdk-stage1/ppp/svr4/ppp.Node b/mdk-stage1/ppp/svr4/ppp.Node
deleted file mode 100644
index 7767ade71..000000000
--- a/mdk-stage1/ppp/svr4/ppp.Node
+++ /dev/null
@@ -1 +0,0 @@
-clone	ppp	c	ppp
diff --git a/mdk-stage1/ppp/svr4/ppp.System b/mdk-stage1/ppp/svr4/ppp.System
deleted file mode 100644
index e60c0eec3..000000000
--- a/mdk-stage1/ppp/svr4/ppp.System
+++ /dev/null
@@ -1 +0,0 @@
-ppp	Y	1	0	0	0	0	0	0	0
diff --git a/mdk-stage1/ppp/svr4/ppp.conf b/mdk-stage1/ppp/svr4/ppp.conf
deleted file mode 100644
index e443a7aac..000000000
--- a/mdk-stage1/ppp/svr4/ppp.conf
+++ /dev/null
@@ -1 +0,0 @@
-name="ppp" parent="pseudo" instance=0;
diff --git a/mdk-stage1/ppp/svr4/ppp_ahdl.Master b/mdk-stage1/ppp/svr4/ppp_ahdl.Master
deleted file mode 100644
index 4fde52596..000000000
--- a/mdk-stage1/ppp/svr4/ppp_ahdl.Master
+++ /dev/null
@@ -1 +0,0 @@
-ppp_ahdl	-	iSf	phdl	0	0	1	1	-1
diff --git a/mdk-stage1/ppp/svr4/ppp_ahdl.System b/mdk-stage1/ppp/svr4/ppp_ahdl.System
deleted file mode 100644
index f41a500f4..000000000
--- a/mdk-stage1/ppp/svr4/ppp_ahdl.System
+++ /dev/null
@@ -1 +0,0 @@
-ppp_ahdl	Y	1	0	0	0	0	0	0	0
diff --git a/mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c b/mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c
deleted file mode 100644
index f81be8abb..000000000
--- a/mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c
+++ /dev/null
@@ -1,49 +0,0 @@
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-
-extern struct streamtab ppp_ahdlcinfo;
-
-static struct fmodsw fsw = {
-    "ppp_ahdl",
-    &ppp_ahdlcinfo,
-    D_NEW | D_MP | D_MTQPAIR
-};
-
-extern struct mod_ops mod_strmodops;
-
-static struct modlstrmod modlstrmod = {
-    &mod_strmodops,
-    "PPP async HDLC module",
-    &fsw
-};
-
-static struct modlinkage modlinkage = {
-    MODREV_1,
-    (void *) &modlstrmod,
-    NULL
-};
-
-/*
- * Entry points for modloading.
- */
-int
-_init(void)
-{
-    return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
-    return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
-    struct modinfo *mip;
-{
-    return mod_info(&modlinkage, mip);
-}
diff --git a/mdk-stage1/ppp/svr4/ppp_comp.Master b/mdk-stage1/ppp/svr4/ppp_comp.Master
deleted file mode 100644
index 78019064e..000000000
--- a/mdk-stage1/ppp/svr4/ppp_comp.Master
+++ /dev/null
@@ -1 +0,0 @@
-ppp_comp	-	iSf	pcmp	0	0	1	1	-1
diff --git a/mdk-stage1/ppp/svr4/ppp_comp.System b/mdk-stage1/ppp/svr4/ppp_comp.System
deleted file mode 100644
index e69d4a1a3..000000000
--- a/mdk-stage1/ppp/svr4/ppp_comp.System
+++ /dev/null
@@ -1 +0,0 @@
-ppp_comp	Y	1	0	0	0	0	0	0	0
diff --git a/mdk-stage1/ppp/svr4/ppp_comp_mod.c b/mdk-stage1/ppp/svr4/ppp_comp_mod.c
deleted file mode 100644
index 83ff8e252..000000000
--- a/mdk-stage1/ppp/svr4/ppp_comp_mod.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * ppp_comp_mod.c - modload support for PPP compression STREAMS module.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2.
- */
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-
-extern struct streamtab ppp_compinfo;
-
-static struct fmodsw fsw = {
-    "ppp_comp",
-    &ppp_compinfo,
-    D_NEW | D_MP | D_MTQPAIR
-};
-
-extern struct mod_ops mod_strmodops;
-
-static struct modlstrmod modlstrmod = {
-    &mod_strmodops,
-    "PPP compression module",
-    &fsw
-};
-
-static struct modlinkage modlinkage = {
-    MODREV_1,
-    (void *) &modlstrmod,
-    NULL
-};
-
-/*
- * Entry points for modloading.
- */
-int
-_init(void)
-{
-    return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
-    return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
-    struct modinfo *mip;
-{
-    return mod_info(&modlinkage, mip);
-}
diff --git a/mdk-stage1/ppp/svr4/ppp_mod.c b/mdk-stage1/ppp/svr4/ppp_mod.c
deleted file mode 100644
index a4b1538a5..000000000
--- a/mdk-stage1/ppp/svr4/ppp_mod.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * ppp_mod.c - modload support for PPP pseudo-device driver.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-#include <sys/ksynch.h>
-
-#ifdef __STDC__
-#define __P(x)	x
-#else
-#define __P(x)	()
-#endif
-
-static int ppp_identify __P((dev_info_t *));
-static int ppp_attach __P((dev_info_t *, ddi_attach_cmd_t));
-static int ppp_detach __P((dev_info_t *, ddi_detach_cmd_t));
-static int ppp_devinfo __P((dev_info_t *, ddi_info_cmd_t, void *, void **));
-
-extern struct streamtab pppinfo;
-extern krwlock_t ppp_lower_lock;
-
-static dev_info_t *ppp_dip;
-
-static struct cb_ops cb_ppp_ops = {
-    nulldev, nulldev, nodev, nodev,	/* cb_open, ... */
-    nodev, nodev, nodev, nodev,		/* cb_dump, ... */
-    nodev, nodev, nodev, nochpoll,	/* cb_devmap, ... */
-    ddi_prop_op,			/* cb_prop_op */
-    &pppinfo,				/* cb_stream */
-    D_NEW|D_MP|D_MTQPAIR|D_MTOUTPERIM|D_MTOCEXCL	/* cb_flag */
-};
-
-static struct dev_ops ppp_ops = {
-    DEVO_REV,				/* devo_rev */
-    0,					/* devo_refcnt */
-    ppp_devinfo,			/* devo_getinfo */
-    ppp_identify,			/* devo_identify */
-    nulldev,				/* devo_probe */
-    ppp_attach,				/* devo_attach */
-    ppp_detach,				/* devo_detach */
-    nodev,				/* devo_reset */
-    &cb_ppp_ops,			/* devo_cb_ops */
-    NULL				/* devo_bus_ops */
-};
-
-/*
- * Module linkage information
- */
-
-static struct modldrv modldrv = {
-    &mod_driverops,			/* says this is a pseudo driver */
-    "PPP-2.3 multiplexing driver",
-    &ppp_ops				/* driver ops */
-};
-
-static struct modlinkage modlinkage = {
-    MODREV_1,
-    (void *) &modldrv,
-    NULL
-};
-
-int
-_init(void)
-{
-    return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
-    return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
-    struct modinfo *mip;
-{
-    return mod_info(&modlinkage, mip);
-}
-
-static int
-ppp_identify(dip)
-    dev_info_t *dip;
-{
-    return strcmp(ddi_get_name(dip), "ppp") == 0? DDI_IDENTIFIED:
-	DDI_NOT_IDENTIFIED;
-}
-
-static int
-ppp_attach(dip, cmd)
-    dev_info_t *dip;
-    ddi_attach_cmd_t cmd;
-{
-
-    if (cmd != DDI_ATTACH)
-	return DDI_FAILURE;
-    if (ddi_create_minor_node(dip, "ppp", S_IFCHR, 0, DDI_PSEUDO, CLONE_DEV)
-	== DDI_FAILURE) {
-	ddi_remove_minor_node(dip, NULL);
-	return DDI_FAILURE;
-    }
-    rw_init(&ppp_lower_lock, NULL, RW_DRIVER, NULL);
-    return DDI_SUCCESS;
-}
-
-static int
-ppp_detach(dip, cmd)
-    dev_info_t *dip;
-    ddi_detach_cmd_t cmd;
-{
-    rw_destroy(&ppp_lower_lock);
-    ddi_remove_minor_node(dip, NULL);
-    return DDI_SUCCESS;
-}
-
-static int
-ppp_devinfo(dip, cmd, arg, result)
-    dev_info_t *dip;
-    ddi_info_cmd_t cmd;
-    void *arg;
-    void **result;
-{
-    int error;
-
-    error = DDI_SUCCESS;
-    switch (cmd) {
-    case DDI_INFO_DEVT2DEVINFO:
-	if (ppp_dip == NULL)
-	    error = DDI_FAILURE;
-	else
-	    *result = (void *) ppp_dip;
-	break;
-    case DDI_INFO_DEVT2INSTANCE:
-	*result = NULL;
-	break;
-    default:
-	error = DDI_FAILURE;
-    }
-    return error;
-}
diff --git a/mdk-stage1/probing.c b/mdk-stage1/probing.c
deleted file mode 100644
index 04afc9ce0..000000000
--- a/mdk-stage1/probing.c
+++ /dev/null
@@ -1,656 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-
-/*
- * This contains stuff related to probing:
- * (1) any (actually only SCSI, NET, CPQ, USB Controllers) devices (autoprobe for PCI and USB)
- * (2) IDE media
- * (3) SCSI media
- * (4) ETH devices
- */
-
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <sys/socket.h>
-#include <net/if.h>
-#include <sys/ioctl.h>
-#include <sys/mount.h>
-#include "stage1.h"
-
-#include "log.h"
-#include "frontend.h"
-#include "modules.h"
-#include "pci-resource/pci-ids.h"
-#ifdef ENABLE_USB
-#include "usb-resource/usb-ids.h"
-#endif
-
-#include "probing.h"
-
-
-struct media_info {
-	char * name;
-	char * model;
-	enum media_type type;
-};
-
-
-static void warning_insmod_failed(enum insmod_return r)
-{
-	if (IS_AUTOMATIC && r == INSMOD_FAILED_FILE_NOT_FOUND)
-		return;
-	if (r != INSMOD_OK) {
-		if (r == INSMOD_FAILED_FILE_NOT_FOUND)
-			stg1_error_message("This floppy doesn't contain the driver.");
-		else
-			stg1_error_message("Warning, installation of driver failed. (please include msg from <Alt-F3> for bugreports)");
-	}
-}
-
-#ifndef DISABLE_NETWORK
-struct net_description_elem
-{
-	char * intf_name;
-	char * intf_description;
-};
-static struct net_description_elem net_descriptions[50];
-static int net_descr_number = 0;
-static char * intf_descr_for_discover = NULL;
-static char * net_intf_too_early_name[50]; /* for modules providing more than one net intf */
-static int net_intf_too_early_number = 0;
-static int net_intf_too_early_ptr = 0;
-
-void prepare_intf_descr(const char * intf_descr)
-{
-	intf_descr_for_discover = strdup(intf_descr);
-}
-
-void net_discovered_interface(char * intf_name)
-{
-	if (!intf_descr_for_discover) {
-		net_intf_too_early_name[net_intf_too_early_number++] = strdup(intf_name);
-		return;
-	}
-	if (!intf_name) {
-		if (net_intf_too_early_ptr >= net_intf_too_early_number) {
-			log_message("NET: was expecting another network interface (broken net module?)");
-			return;
-		}
-		net_descriptions[net_descr_number].intf_name = net_intf_too_early_name[net_intf_too_early_ptr++];
-	}
-	else
-		net_descriptions[net_descr_number].intf_name = strdup(intf_name);
-	net_descriptions[net_descr_number].intf_description = strdup(intf_descr_for_discover);
-	intf_descr_for_discover = NULL;
-	net_descr_number++;
-}
-
-char * get_net_intf_description(char * intf_name)
-{
-	int i;
-	for (i = 0; i < net_descr_number ; i++)
-		if (!strcmp(net_descriptions[i].intf_name, intf_name))
-			return net_descriptions[i].intf_description;
-	return strdup("unknown");
-}
-#endif
-
-void probe_that_type(enum driver_type type)
-{
-	if (IS_EXPERT) {
-		ask_insmod(type);
-		return;
-	}
-
-
-	/* ---- PCI probe ---------------------------------------------- */
-	{
-		FILE * f;
-		int len = 0;
-		char buf[200];
-		struct pci_module_map * pcidb = NULL;
-
-		switch (type) {
-#ifndef DISABLE_PCIADAPTERS
-#ifndef DISABLE_MEDIAS
-		case SCSI_ADAPTERS:
-			pcidb = medias_pci_ids;
-			len   = medias_num_ids;
-			break;
-#endif
-#ifndef DISABLE_NETWORK
-		case NETWORK_DEVICES:
-			pcidb = network_pci_ids;
-			len   = network_num_ids;
-			break;
-#endif
-#endif
-#ifdef ENABLE_USB
-		case USB_CONTROLLERS:
-			pcidb = usb_pci_ids;
-			len   = usb_num_ids;
-			break;
-#endif
-		default:
-			goto end_pci_probe;
-		}
-
-		if (!(f = fopen("/proc/bus/pci/devices", "rb"))) {
-			log_message("PCI: could not open proc file");
-			goto end_pci_probe;
-		}
-
-		while (1) {
-			int i, garb, vendor, device;
-
-			if (!fgets(buf, sizeof(buf), f)) break;
-		
-			sscanf(buf, "%x %x", &garb, &vendor);
-			device = vendor & 0xFFFF; /* because scanf from dietlibc does not support %4f */
-			vendor = (vendor >> 16) & 0xFFFF;
- 
-			for (i = 0; i < len; i++) {
-				if (pcidb[i].vendor == vendor && pcidb[i].device == device) {
-					log_message("PCI: device %04x %04x is \"%s\" (%s)", vendor, device, pcidb[i].name, pcidb[i].module);
-#ifndef DISABLE_MEDIAS
-					if (type == SCSI_ADAPTERS) {
-						int wait_msg = 0;
-						enum insmod_return failed;
-						if (IS_AUTOMATIC) {
-							wait_message("Loading driver for SCSI adapter:\n \n%s", pcidb[i].name);
-							wait_msg = 1;
-						} else
-							stg1_info_message("About to load driver for SCSI adapter:\n \n%s", pcidb[i].name);
-						failed = my_insmod(pcidb[i].module, SCSI_ADAPTERS, NULL);
-						if (wait_msg)
-							remove_wait_message();
-						warning_insmod_failed(failed);
-
-					}
-#endif
-#ifndef DISABLE_NETWORK
-					if (type == NETWORK_DEVICES) {
-						stg1_info_message("About to load driver for network device:\n \n%s", pcidb[i].name);
-						prepare_intf_descr(pcidb[i].name);
-						warning_insmod_failed(my_insmod(pcidb[i].module, NETWORK_DEVICES, NULL));
-						if (intf_descr_for_discover) /* for modules providing more than one net intf */
-							net_discovered_interface(NULL);
-					}
-#endif
-#ifdef ENABLE_USB
-					if (type == USB_CONTROLLERS)
-						my_insmod(pcidb[i].module, USB_CONTROLLERS, NULL);
-#endif
-				}
-			}
-		}
-		fclose(f);
-	end_pci_probe:;
-	}
-
-
-#ifdef ENABLE_USB
-	/* ---- USB probe ---------------------------------------------- */
-	{
-		static int already_probed_usb_controllers = 0;
-		static int already_mounted_usbdev = 0;
-
-		FILE * f;
-		int len = 0;
-		char buf[200];
-		struct usb_module_map * usbdb = NULL;
-
-		if (!already_probed_usb_controllers) {
-			already_probed_usb_controllers = 1;
-			probe_that_type(USB_CONTROLLERS);
-		}
-
-		if (!already_mounted_usbdev) {
-			already_mounted_usbdev = 1;
-			my_insmod("usb-storage", SCSI_ADAPTERS, NULL);
-			if (mount("/proc/bus/usb", "/proc/bus/usb", "usbdevfs", 0, NULL)) {
-				log_message("USB: couldn't mount /proc/bus/usb");
-				goto end_usb_probe;
-			}
-			wait_message("Waiting for USB stuff to show up.");
-			sleep(4); /* sucking background work */
-			remove_wait_message();
-		}
-
-		if (!(f = fopen("/proc/bus/usb/devices", "rb"))) {
-			log_message("USB: could not open proc file");
-			goto end_usb_probe;
-		}
-
-		switch (type) {
-		case NETWORK_DEVICES:
-			usbdb = usb_usb_ids;
-			len   = usb_usb_num_ids;
-			break;
-		default:
-			goto end_usb_probe;
-		}
-
-		while (1) {
-			int i, vendor, id;
-
-			if (!fgets(buf, sizeof(buf), f)) break;
-
-			if (strstr(buf, "Keyboard")) {
-				my_insmod("usbkbd", ANY_DRIVER_TYPE, NULL);
-				my_insmod("keybdev", ANY_DRIVER_TYPE, NULL);
-			}
-
-			if (sscanf(buf, "P:  Vendor=%x ProdID=%x", &vendor, &id) != 2)
-				continue;
-
-			for (i = 0; i < len; i++) {
-				if (usbdb[i].vendor == vendor && usbdb[i].id == id) {
-					log_message("USB: device %04x %04x is \"%s\" (%s)", vendor, id, usbdb[i].name, usbdb[i].module);
-#ifndef DISABLE_NETWORK
-					if (type == NETWORK_DEVICES) {
-						stg1_info_message("About to load driver for usb network device:\n \n%s", usbdb[i].name);
-						prepare_intf_descr(usbdb[i].name);
-						warning_insmod_failed(my_insmod(usbdb[i].module, NETWORK_DEVICES, NULL));
-						if (intf_descr_for_discover) /* for modules providing more than one net intf */
-							net_discovered_interface(NULL);
-					}
-#endif
-
-				}
-			}
-		}
-		fclose(f);
-	end_usb_probe:;
-	}
-#endif
-}
-
-
-#ifndef DISABLE_MEDIAS
-static struct media_info * medias = NULL;
-
-static void find_media(void)
-{
-    	char b[50];
-	char buf[5000];
-	struct media_info tmp[50];
-	int count;
-        int fd;
-
-	if (!medias)
-		probe_that_type(SCSI_ADAPTERS);
-	else
-		free(medias); /* that does not free the strings, by the way */
-
-	/* ----------------------------------------------- */
-	log_message("looking for ide media");
-
-    	count = 0;
-    	strcpy(b, "/proc/ide/hd");
-    	for (b[12] = 'a'; b[12] <= 'h'; b[12]++) {
-		int i;
-		char ide_disk[] = "disk";
-		char ide_cdrom[] = "cdrom";
-		char ide_tape[] = "tape";
-		char ide_floppy[] = "floppy";
-		
-		/* first, test if file exists (will tell if attached medium exists) */
-		b[13] = '\0';
-		if (access(b, R_OK))
-			continue;
-
-		tmp[count].name = strdup("hda");
-		tmp[count].name[2] = b[12];
-
-		/* media type */
-		strcpy(b + 13, "/media");
-		fd = open(b, O_RDONLY);
-		if (fd == -1) {
-			log_message("failed to open %s for reading", b);
-			continue;
-		}
-
-		i = read(fd, buf, sizeof(buf));
-		if (i == -1) {
-			log_message("failed to read %s", b);
-			continue;
-		}
-		buf[i] = '\0';
-		close(fd);
-
-		if (ptr_begins_static_str(buf, ide_disk))
-			tmp[count].type = DISK;
-		else if (ptr_begins_static_str(buf, ide_cdrom))
-			tmp[count].type = CDROM;
-		else if (ptr_begins_static_str(buf, ide_tape))
-			tmp[count].type = TAPE;
-		else if (ptr_begins_static_str(buf, ide_floppy))
-			tmp[count].type = FLOPPY;
-		else
-			tmp[count].type = UNKNOWN_MEDIA;
-
-		/* media model */
-		strcpy(b + 13, "/model");
-		fd = open(b, O_RDONLY);
-		if (fd == -1) {
-			log_message("failed to open %s for reading", b);
-			continue;
-		}
-
-		i = read(fd, buf, sizeof(buf));
-		if (i <= 0) {
-			log_message("failed to read %s", b);
-			tmp[count].model = strdup("(none)");
-		}
-		else {
-			buf[i-1] = '\0'; /* eat the \n */
-			tmp[count].model = strdup(buf);
-		}
-		close(fd);
-
-		log_message("IDE/%d: %s is a %s", tmp[count].type, tmp[count].name, tmp[count].model);
-		count++;
-    	}
-
-
-	/* ----------------------------------------------- */
-	log_message("looking for scsi media");
-
-	fd = open("/proc/scsi/scsi", O_RDONLY);
-	if (fd != -1) {
-		enum { SCSI_TOP, SCSI_HOST, SCSI_VENDOR, SCSI_TYPE } state = SCSI_TOP;
-		char * start, * chptr, * next, * end;
-		char scsi_disk_count = 'a';
-		char scsi_cdrom_count = '0';
-		char scsi_tape_count = '0';
-
-		char scsi_no_devices[] = "Attached devices: none";
-		char scsi_some_devices[] = "Attached devices: ";
-		char scsi_host[] = "Host: ";
-		char scsi_vendor[] = "  Vendor: ";
-
-		int i = read(fd, &buf, sizeof(buf)-1);
-		if (i < 1) {
-			close(fd);
-			goto end_scsi;
-		}
-		close(fd);
-		buf[i] = '\0';
-
-		if (ptr_begins_static_str(buf, scsi_no_devices))
-			goto end_scsi;
-		
-		start = buf;
-		while (*start) {
-			char tmp_model[50];
-			char tmp_name[10];
-
-			chptr = start;
-			while (*chptr != '\n') chptr++;
-			*chptr = '\0';
-			next = chptr + 1;
-			
-			switch (state) {
-			case SCSI_TOP:
-				if (!ptr_begins_static_str(start, scsi_some_devices))
-					goto end_scsi;
-				state = SCSI_HOST;
-				break;
-
-			case SCSI_HOST:
-				if (!ptr_begins_static_str(start, scsi_host))
-					goto end_scsi;
-				state = SCSI_VENDOR;
-				break;
-
-			case SCSI_VENDOR:
-				if (!ptr_begins_static_str(start, scsi_vendor))
-					goto end_scsi;
-
-				/* (1) Grab Vendor info */
-				start += 10;
-				end = chptr = strstr(start, "Model:");
-				if (!chptr)
-					goto end_scsi;
-
-				chptr--;
-				while (*chptr == ' ')
-					chptr--;
-				if (*chptr == ':') {
-					chptr++;
-					*(chptr + 1) = '\0';
-					strcpy(tmp_model,"(unknown)");
-				} else {
-					*(chptr + 1) = '\0';
-					strcpy(tmp_model, start);
-				}
-
-				/* (2) Grab Model info */
-				start = end;
-				start += 7;
-				
-				chptr = strstr(start, "Rev:");
-				if (!chptr)
-					goto end_scsi;
-				
-				chptr--;
-				while (*chptr == ' ') chptr--;
-				*(chptr + 1) = '\0';
-				
-				strcat(tmp_model, " ");
-				strcat(tmp_model, start);
-
-				tmp[count].model = strdup(tmp_model);
-				
-				state = SCSI_TYPE;
-
-				break;
-
-			case SCSI_TYPE:
-				if (strncmp("  Type:", start, 7))
-					goto end_scsi;
-				*tmp_name = '\0';
-
-				if (strstr(start, "Direct-Access")) {
-					sprintf(tmp_name, "sd%c", scsi_disk_count++);
-					tmp[count].type = DISK;
-				} else if (strstr(start, "Sequential-Access")) {
-					sprintf(tmp_name, "st%c", scsi_tape_count++);
-					tmp[count].type = TAPE;
-				} else if (strstr(start, "CD-ROM")) {
-					sprintf(tmp_name, "sr%c", scsi_cdrom_count++);
-					tmp[count].type = CDROM;
-				}
-
-				if (*tmp_name) {
-					tmp[count].name = strdup(tmp_name);
-					log_message("SCSI/%d: %s is a %s", tmp[count].type, tmp[count].name, tmp[count].model);
-					count++;
-				}
-				
-				state = SCSI_HOST;
-			}
-			
-			start = next;
-		}
-		
-	end_scsi:;
-	}
-
-	/* ----------------------------------------------- */
-	log_message("looking for Compaq Smart Array media");
-	{
-		char * procfiles[] = { "/proc/driver/cpqarray/ida0", "/proc/driver/cciss/cciss0", // 2.4 style
-				       "/proc/array/ida", "/proc/cciss/cciss",                 // 2.2 style
-				       NULL };
-		static char cpq_descr[] = "Compaq RAID logical disk";
-		char ** procfile = procfiles;
-		FILE * f;
-		while (procfile && *procfile && (f = fopen(*procfile, "rb"))) {
-			while (fgets(buf, sizeof(buf), f)) {
-				if (ptr_begins_static_str(buf, "ida/") || ptr_begins_static_str(buf, "cciss/")) {
-					char * end = strchr(buf, ':');
-					if (!end)
-						log_message("Inconsistency in %s, line:\n%s", *procfile, buf);
-					else {
-						*end = '\0';
-						tmp[count].name = strdup(buf);
-						tmp[count].type = DISK;
-						tmp[count].model = cpq_descr;
-						log_message("CPQ: found %s", tmp[count].name);
-						count++;
-					}
-				}
-			}
-			fclose(f);
-			procfile++;
-		}
-	}
-
-	/* ----------------------------------------------- */
-	log_message("looking for DAC960");
-	{
-		FILE * f;
-		if ((f = fopen("/tmp/syslog", "rb"))) {
-			while (fgets(buf, sizeof(buf), f)) {
-				char * start;
-				if ((start = strstr(buf, "/dev/rd/"))) {
-					char * end = strchr(start, ':');
-					if (!end)
-						log_message("Inconsistency in syslog, line:\n%s", buf);
-					else {
-						*end = '\0';
-						tmp[count].name = strdup(start+5);
-						tmp[count].type = DISK;
-						start = end + 2;
-						end = strchr(start, ',');
-						if (end) {
-							*end = '\0';
-							tmp[count].model = strdup(start);
-						} else
-							tmp[count].model = "(unknown)";
-						log_message("DAC960: found %s (%s)", tmp[count].name, tmp[count].model);
-						count++;
-					}
-				}
-			}
-			fclose(f);
-		}
-	}
-
-	/* ----------------------------------------------- */
-	tmp[count].name = NULL;
-	count++;
-
-	medias = memdup(tmp, sizeof(struct media_info) * count);
-}
-
-
-/* Finds by media */
-void get_medias(enum media_type media, char *** names, char *** models)
-{
-	struct media_info * m;
-	char * tmp_names[50];
-	char * tmp_models[50];
-	int count;
-
-	find_media();
-
-	m = medias;
-
-	count = 0;
-	while (m && m->name) {
-		if (m->type == media) {
-			tmp_names[count] = strdup(m->name);
-			tmp_models[count++] = strdup(m->model);
-		}
-		m++;
-	}
-	tmp_names[count] = NULL;
-	tmp_models[count++] = NULL;
-
-	*names = memdup(tmp_names, sizeof(char *) * count);
-	*models = memdup(tmp_models, sizeof(char *) * count);
-}
-#endif /* DISABLE_MEDIAS */
-
-
-#ifndef DISABLE_NETWORK
-int net_device_available(char * device) {
-	struct ifreq req;
-	int s;
-    
-	s = socket(AF_INET, SOCK_DGRAM, 0);
-	if (s < 0) {
-		log_perror(device);
-		return 0;
-	}
-	strcpy(req.ifr_name, device);
-	if (ioctl(s, SIOCGIFFLAGS, &req)) {
-		/* if we can't get the flags, the networking device isn't available */
-		close(s);
-		return 0;
-	}
-	close(s);
-	return 1;
-}
-
-
-char ** get_net_devices(void)
-{
-	char * devices[] = {
-		"eth0", "eth1", "eth2", "eth3", "eth4", "eth5",
-		"tr0",
-		"plip0", "plip1", "plip2",
-		"fddi0",
-#ifdef ENABLE_USB
-		"usb0", "usb1", "usb2", "usb3",
-#endif
-		NULL
-	};
-	char ** ptr = devices;
-	char * tmp[50];
-	int i = 0;
-	static int already_probed = 0;
-
-	if (!already_probed) {
-		already_probed = 1; /* cut off loop brought by: probe_that_type => my_insmod => get_net_devices */
-		probe_that_type(NETWORK_DEVICES);
-	}
-
-	while (ptr && *ptr) {
-		if (net_device_available(*ptr))
-			tmp[i++] = strdup(*ptr);
-		ptr++;
-	}
-	tmp[i++] = NULL;
-
-	return memdup(tmp, sizeof(char *) * i);
-}
-#endif /* DISABLE_NETWORK */
diff --git a/mdk-stage1/probing.h b/mdk-stage1/probing.h
deleted file mode 100644
index d2bf1e567..000000000
--- a/mdk-stage1/probing.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _PROBING_H_
-#define _PROBING_H_
-
-enum media_type { CDROM, DISK, FLOPPY, TAPE, UNKNOWN_MEDIA };
-
-enum driver_type { SCSI_ADAPTERS, NETWORK_DEVICES, USB_CONTROLLERS, ANY_DRIVER_TYPE };
-
-void get_medias(enum media_type media, char *** names, char *** models);
-char ** get_net_devices(void);
-void net_discovered_interface(char * intf_name);
-char * get_net_intf_description(char * intf_name);
-void prepare_intf_descr(const char * intf_descr);
-
-
-#endif
diff --git a/mdk-stage1/rescue-gui.c b/mdk-stage1/rescue-gui.c
deleted file mode 100644
index dd4b9a0df..000000000
--- a/mdk-stage1/rescue-gui.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2001 MandrakeSoft
- *
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdlib.h>
-#define _USE_BSD
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/wait.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <sys/mount.h>
-#include <fcntl.h>
-#include <sys/ioctl.h>
-#include <linux/unistd.h>
-#include <sys/select.h>
-
-#include "config-stage1.h"
-#include "frontend.h"
-#include "tools.h"
-
-char * env[] = {
-	"PATH=/usr/bin:/bin:/sbin:/usr/sbin:/mnt/sbin:/mnt/usr/sbin:/mnt/bin:/mnt/usr/bin",
-	"LD_LIBRARY_PATH=/lib:/usr/lib:/mnt/lib:/mnt/usr/lib:/usr/X11R6/lib:/mnt/usr/X11R6/lib",
-	"HOME=/",
-	"TERM=linux",
-	"TERMINFO=/etc/terminfo",
-	NULL
-};
-
-void pause(void) { unsigned char t; fflush(stdout); read(0, &t, 1); }
-
-
-/* ------ UUURGH this is duplicated from `init.c', don't edit here........ */
-static inline _syscall3(int, reboot, int, magic, int, magic2, int, flag);
-#define LOOP_CLR_FD	0x4C01
-void del_loop(char *device) 
-{
-	int fd;
-	if ((fd = open(device, O_RDONLY, 0)) < 0) {
-		printf("del_loop open failed\n");
-		return;
-	}
-
-	if (ioctl(fd, LOOP_CLR_FD, 0) < 0) {
-		printf("del_loop ioctl failed");
-		return;
-	}
-
-	close(fd);
-}
-struct filesystem { char * dev; char * name; char * fs; int mounted; };
-void unmount_filesystems(void)
-{
-	int fd, size;
-	char buf[65535];			/* this should be big enough */
-	char *p;
-	struct filesystem fs[500];
-	int numfs = 0;
-	int i, nb;
-	
-	printf("unmounting filesystems...\n"); 
-	
-	fd = open("/proc/mounts", O_RDONLY, 0);
-	if (fd < 1) {
-		printf("ERROR: failed to open /proc/mounts");
-		sleep(2);
-		return;
-	}
-
-	size = read(fd, buf, sizeof(buf) - 1);
-	buf[size] = '\0';
-
-	close(fd);
-
-	p = buf;
-	while (*p) {
-		fs[numfs].mounted = 1;
-		fs[numfs].dev = p;
-		while (*p != ' ') p++;
-		*p++ = '\0';
-		fs[numfs].name = p;
-		while (*p != ' ') p++;
-		*p++ = '\0';
-		fs[numfs].fs = p;
-		while (*p != ' ') p++;
-		*p++ = '\0';
-		while (*p != '\n') p++;
-		p++;
-		if (strcmp(fs[numfs].name, "/") != 0) numfs++; /* skip if root, no need to take initrd root in account */
-	}
-
-	/* Pixel's ultra-optimized sorting algorithm:
-	   multiple passes trying to umount everything until nothing moves
-	   anymore (a.k.a holy shotgun method) */
-	do {
-		nb = 0;
-		for (i = 0; i < numfs; i++) {
-			/*printf("trying with %s\n", fs[i].name);*/
-			if (fs[i].mounted && umount(fs[i].name) == 0) { 
-				if (strncmp(fs[i].dev + sizeof("/dev/") - 1, "loop",
-					    sizeof("loop") - 1) == 0)
-					del_loop(fs[i].dev);
-				
-				printf("\t%s\n", fs[i].name);
-				fs[i].mounted = 0;
-				nb++;
-			}
-		}
-	} while (nb);
-	
-	for (i = nb = 0; i < numfs; i++)
-		if (fs[i].mounted) {
-			printf("\t%s umount failed\n", fs[i].name);
-			if (strcmp(fs[i].fs, "ext2") == 0) nb++; /* don't count not-ext2 umount failed */
-		}
-	
-	if (nb) {
-		printf("failed to umount some filesystems\n");
-		while (1);
-	}
-}
-/* ------ UUURGH -- end */
-
-
-int main(int argc, char **argv)
-{
-	enum return_type results;
-
-	char install_bootloader[] = "Re-install Boot Loader";
-#ifdef __i386__
-	char restore_ms_boot[] = "Restore Windows Boot Loader";
-#endif
-	char mount_parts[] = "Mount your partitions under /mnt";
-	char go_to_console[] = "Go to console";
-	char reboot_[] = "Reboot";
-	char doc[] = "Doc: what's addressed by this Rescue?";
-
-	char * actions[] = { install_bootloader,
-#ifdef __i386__
-			     restore_ms_boot,
-#endif
-			     mount_parts, go_to_console, reboot_, doc, NULL };
-	char * choice;
-
-	init_frontend("Welcome to " DISTRIB_NAME " Rescue (" VERSION ") " __DATE__ " " __TIME__);
-
-	do {
-		int pid;
-		char * binary = NULL;
-
-		choice = "";
-		results = ask_from_list("Please choose the desired action.", actions, &choice);
-
-		if (ptr_begins_static_str(choice, install_bootloader)) {
-			binary = "/usr/bin/install_bootloader";
-		}
-#ifdef __i386__
-		if (ptr_begins_static_str(choice, restore_ms_boot)) {
-			binary = "/usr/bin/restore_ms_boot";
-		}
-#endif
-		if (ptr_begins_static_str(choice, mount_parts)) {
-			binary = "/usr/bin/guessmounts";
-		}
-		if (ptr_begins_static_str(choice, reboot_)) {
-			finish_frontend();
-			unmount_filesystems();
-			printf("rebooting system\n");
-			sleep(2);
-			reboot(0xfee1dead, 672274793, 0x01234567);
-		}
-		if (ptr_begins_static_str(choice, doc)) {
-			binary = "/usr/bin/rescue-doc";
-		}
-
-		if (binary) {
-			int wait_status;
-			suspend_to_console();
-			if (!(pid = fork())) {
-
-				char * child_argv[2];
-				child_argv[0] = binary;
-				child_argv[1] = NULL;
-
-				execve(child_argv[0], child_argv, env);
-				printf("Can't execute binary (%s)\n<press Enter>\n", binary);
-				pause();
-
-				return 33;
-			}
-			while (wait4(-1, &wait_status, 0, NULL) != pid) {};
-			printf("<press Enter to return to Rescue GUI>");
-			pause();
-			resume_from_suspend();
-			if (!WIFEXITED(wait_status) || WEXITSTATUS(wait_status) != 0) {
-				error_message("Program exited abnormally (return code %d).", WEXITSTATUS(wait_status));
-				if (WIFSIGNALED(wait_status))
-					error_message("(received signal %d)", WTERMSIG(wait_status));
-			}
-		}
-
-	} while (results == RETURN_OK && !ptr_begins_static_str(choice, go_to_console));
-
-	finish_frontend();
-	printf("Bye.\n");
-	
-	return 0;
-}
diff --git a/mdk-stage1/rp-pppoe/.cvsignore b/mdk-stage1/rp-pppoe/.cvsignore
deleted file mode 100644
index 1f345b56b..000000000
--- a/mdk-stage1/rp-pppoe/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-pppoe-bin
diff --git a/mdk-stage1/rp-pppoe/README b/mdk-stage1/rp-pppoe/README
deleted file mode 100644
index 269fc16be..000000000
--- a/mdk-stage1/rp-pppoe/README
+++ /dev/null
@@ -1,87 +0,0 @@
-pppoe: a PPP-over-Ethernet redirector for pppd
-Copyright (C) 2001 Roaring Penguin Software Inc.
-
-Much inspiration from an earlier client by Luke Stras.
-
-The MSS clamping was inspired by mssclampfw by Marc Boucher <marc@mbsi.ca>
-with acknowledgements to Rebel.com (http://www.rebel.com).  However, the
-actual MSS clamping code is original and is licensed under the GPL, unlike
-the original mssclampfw.
-
-Introduction
-============
-
-pppoe is a user-space redirector which permits the use of PPPoE
-(Point-to-Point Over Ethernet) with Linux.  PPPoE is used by many
-ADSL service providers.
-
-Installation
-============
-
-Requirements
-------------
-
-1) Linux 2.2.9 or later on Intel, Sparc or PowerPC.  It may work on
-   Alpha, too -- anyone care to let me know?
-
-	   OR
-
-   Linux 2.0.36 or later.
-
-	   OR
-
-   FreeBSD, NetBSD or OpenBSD with BPF support.  I have access only
-   to FreeBSD.  In general, I can't answer questions about the *BSD's
-   as well as I can about Linux.
-
-
-2) pppd 2.3.10 or later.  Versions 2.3.7 and later work unless you use
-   demand-dialling.  For demand dialling, you *must* use 2.3.10 or later.
-
-QUICKSTART
-----------
-
-If you're lucky, the "quickstart" method will work.  After unpacking
-the archive, become root and type:
-
-	./go
-
-This should configure, compile and install the software and set up your
-ADSL connection.  You'll have to answer a few questions along the way.
-
-If you want the GUI wrapper, type:
-
-	./go-gui
-
-If ./go and ./go-gui didn't work, read the rest of this README.
-
-Compiling
----------
-
-Compile and install pppd if you don't already have it.  Then:
-
-1) Unpack:
-
-	$ tar xzvf rp-pppoe-xxx.tar.gz
-
-2) Change to source directory:
-
-	$ cd src
-
-3) Configure:
-
-	$ ./configure
-
-4) Compile:
-
-	$ make
-
-4) Install (this step must be done as root)
-
-	# make install
-
-5) Now read doc/HOW-TO-CONNECT
-
---
-David F. Skoll <dfs@roaringpenguin.com> | Roaring Penguin Software Inc.
-http://www.roaringpenguin.com           | Linux and UNIX Specialists
\ No newline at end of file
diff --git a/mdk-stage1/rp-pppoe/configs/firewall-masq b/mdk-stage1/rp-pppoe/configs/firewall-masq
deleted file mode 100644
index cb16fbecf..000000000
--- a/mdk-stage1/rp-pppoe/configs/firewall-masq
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/sh
-#
-# firewall-masq		This script sets up firewall rules for a machine
-#                       acting as a masquerading gateway
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.  This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-
-# Interface to Internet
-EXTIF=ppp+
-
-ANY=0.0.0.0/0
-
-ipchains -P input ACCEPT
-ipchains -P output ACCEPT
-ipchains -P forward DENY
-
-ipchains -F forward
-ipchains -F input
-ipchains -F output
-
-# Deny TCP and UDP packets to privileged ports
-ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p udp -j DENY
-ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p tcp -j DENY
-
-# Deny TCP connection attempts
-ipchains -A input -l -i $EXTIF -p tcp -y -j DENY
-
-# Deny ICMP echo-requests
-ipchains -A input -l -i $EXTIF -s $ANY echo-request -p icmp -j DENY
-
-# Do masquerading
-ipchains -A forward -j MASQ
-echo 1 > /proc/sys/net/ipv4/ip_forward
diff --git a/mdk-stage1/rp-pppoe/configs/firewall-standalone b/mdk-stage1/rp-pppoe/configs/firewall-standalone
deleted file mode 100644
index bcb1e92b1..000000000
--- a/mdk-stage1/rp-pppoe/configs/firewall-standalone
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-#
-# firewall-standalone	This script sets up firewall rules for a standalone
-#                       machine
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.  This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-
-# Interface to Internet
-EXTIF=ppp+
-
-ANY=0.0.0.0/0
-
-ipchains -P input ACCEPT
-ipchains -P output ACCEPT
-ipchains -P forward DENY
-
-ipchains -F forward
-ipchains -F input
-ipchains -F output
-
-# Deny TCP and UDP packets to privileged ports
-ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p udp -j DENY
-ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p tcp -j DENY
-
-# Deny TCP connection attempts
-ipchains -A input -l -i $EXTIF -p tcp -y -j DENY
-
-# Deny ICMP echo-requests
-ipchains -A input -l -i $EXTIF -s $ANY echo-request -p icmp -j DENY
-
diff --git a/mdk-stage1/rp-pppoe/configs/pap-secrets b/mdk-stage1/rp-pppoe/configs/pap-secrets
deleted file mode 100644
index f4483a723..000000000
--- a/mdk-stage1/rp-pppoe/configs/pap-secrets
+++ /dev/null
@@ -1,9 +0,0 @@
-# Edit this file and place it in /etc/ppp/pap-secrets
-
-#User			#Server		#Password	#IP
-bxxxxx@sympatico.ca	*		my_password	*
-
-# Replace bxxxxx@sympatico.ca with your Sympatico user-ID
-# Replace my_password with your Sympatico password
-
-# For Magma, use xxyyzz@magma.ca
diff --git a/mdk-stage1/rp-pppoe/configs/pppoe-server-options b/mdk-stage1/rp-pppoe/configs/pppoe-server-options
deleted file mode 100644
index 8319870ac..000000000
--- a/mdk-stage1/rp-pppoe/configs/pppoe-server-options
+++ /dev/null
@@ -1,5 +0,0 @@
-# PPP options for the PPPoE server
-require-pap
-login
-lcp-echo-interval 10
-lcp-echo-failure 2
diff --git a/mdk-stage1/rp-pppoe/configs/pppoe.conf b/mdk-stage1/rp-pppoe/configs/pppoe.conf
deleted file mode 100644
index 9f77b913c..000000000
--- a/mdk-stage1/rp-pppoe/configs/pppoe.conf
+++ /dev/null
@@ -1,126 +0,0 @@
-#***********************************************************************
-#
-# pppoe.conf
-#
-# Configuration file for rp-pppoe.  Edit as appropriate and install in
-# /etc/ppp/pppoe.conf
-#
-# NOTE: This file is used by the adsl-start, adsl-stop, adsl-connect and
-#       adsl-status shell scripts.  It is *not* used in any way by the
-#       "pppoe" executable.
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# $Id$
-#***********************************************************************
-
-# When you configure a variable, DO NOT leave spaces around the "=" sign.
-
-# Ethernet card connected to ADSL modem
-ETH=eth1
-
-# ADSL user name.  You may have to supply "@provider.com"  Sympatico
-# users in Canada do need to include "@sympatico.ca"
-# Sympatico uses PAP authentication.  Make sure /etc/ppp/pap-secrets
-# contains the right username/password combination.
-# For Magma, use xxyyzz@magma.ca
-USER=bxxxnxnx@sympatico.ca
-
-# Bring link up on demand?  Default is to leave link up all the time.
-# If you want the link to come up on demand, set DEMAND to a number indicating
-# the idle time after which the link is brought down.
-DEMAND=no
-#DEMAND=300
-
-# DNS type: SERVER=obtain from server; SPECIFY=use DNS1 and DNS2;
-# NOCHANGE=do not adjust.
-DNSTYPE=SERVER
-
-# Obtain DNS server addresses from the peer (recent versions of pppd only)
-USEPEERDNS=yes
-
-DNS1=
-DNS2=
-
-### ONLY TOUCH THE FOLLOWING SETTINGS IF YOU'RE AN EXPERT
-
-# How long adsl-start waits for a new PPP interface to appear before
-# concluding something went wrong.  If you use 0, then adsl-start
-# exits immediately with a successful status and does not wait for the
-# link to come up.  Time is in seconds.
-#
-# WARNING WARNING WARNING:
-#
-# If you are using rp-pppoe on a physically-inaccessible host, set
-# CONNECT_TIMEOUT to 0.  This makes SURE that the machine keeps trying
-# to connect forever after adsl-start is called.  Otherwise, it will
-# give out after CONNECT_TIMEOUT seconds and will not attempt to
-# connect again, making it impossible to reach.
-CONNECT_TIMEOUT=30
-
-# How often in seconds adsl-start polls to check if link is up
-CONNECT_POLL=2
-
-# Specific desired AC Name
-ACNAME=
-
-# Specific desired service name
-SERVICENAME=
-
-# Character to echo at each poll.  Use PING="" if you don't want
-# anything echoed
-PING="."
-
-# File where the adsl-connect script writes its process-ID.
-# Three files are actually used:
-#   $PIDFILE       contains PID of adsl-connect script
-#   $PIDFILE.pppoe contains PID of pppoe process
-#   $PIDFILE.pppd  contains PID of pppd process
-CF_BASE=`basename $CONFIG`
-PIDFILE="/var/run/$CF_BASE-adsl.pid"
-
-# Do you want to use synchronous PPP?  "yes" or "no".  "yes" is much
-# easier on CPU usage, but may not work for you.  It is safer to use
-# "no", but you may want to experiment with "yes".  "yes" is generally
-# safe on Linux machines with the n_hdlc line discipline; unsafe on others.
-SYNCHRONOUS=no
-
-# Do you want to clamp the MSS?  Here's how to decide:
-# - If you have only a SINGLE computer connected to the ADSL modem, choose
-#   "no".
-# - If you have a computer acting as a gateway for a LAN, choose "1412".
-#   The setting of 1412 is safe for either setup, but uses slightly more
-#   CPU power.
-CLAMPMSS=1412
-#CLAMPMSS=no
-
-# LCP echo interval and failure count.
-LCP_INTERVAL=20
-LCP_FAILURE=3
-
-# PPPOE_TIMEOUT should be about 4*LCP_INTERVAL
-PPPOE_TIMEOUT=80
-
-# Firewalling: One of NONE, STANDALONE or MASQUERADE
-FIREWALL=NONE
-
-# Linux kernel-mode plugin for pppd.  If you want to try the kernel-mode
-# plugin, use LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so
-LINUX_PLUGIN=
-
-# Any extra arguments to pass to pppoe.  Normally, use a blank string
-# like this:
-PPPOE_EXTRA=""
-
-# Rumour has it that "Citizen's Communications" with a 3Com
-# HomeConnect ADSL Modem DualLink requires these extra options:
-# PPPOE_EXTRA="-f 3c12:3c13 -S ISP"
-
-# Any extra arguments to pass to pppd.  Normally, use a blank string
-# like this:
-PPPD_EXTRA=""
-
-
diff --git a/mdk-stage1/rp-pppoe/doc/CHANGES b/mdk-stage1/rp-pppoe/doc/CHANGES
deleted file mode 100644
index 9afce027d..000000000
--- a/mdk-stage1/rp-pppoe/doc/CHANGES
+++ /dev/null
@@ -1,177 +0,0 @@
-Changes from Version 2.8 to 3.0:
-
-- Many small improvements to server.  Server now only makes one
-  discovery socket, systemwide, with addition of "-n" option to pppoe.
-
-- Fixes for compilation problems on BSD, Solaris and some Linux platforms.
-
-- Added "-p" option to pppoe-server to allow you to specify a pool of
-  IP addresses to assign to clients.
-
-- Added GUI system (tkpppoe).  This work was funded by Iospan
-  Wireless, Inc.  The GUI includes a Set-UID wrapper (pppoe-wrapper)
-  which allows ordinary users to control a link (if so authorized.)
-  I believe the wrapper script is secure, but please audit the
-  source code (gui/wrapper.c) if you have any concerns.
-
-- Changes to scripts and pppoe.conf.  DNS setup is now dynamic (happens
-  each time adsl-connect runs.)
-
-- Made relay.c check packet lengths rigorously; made it throw out Ethernet
-  frame padding on session packets as well as discovery packets.
-
-Changes from Version 2.7 to 2.8:
-
-- Added init scripts for TurboLinux, courtesy of Yasuhiro Sumi.
-
-- Made relay.c check packet lengths rigorously; made it throw out Ethernet
-  frame padding on discovery packets.
-
-*** NOTE: 2.7 was not released publicly
-
-Changes from Version 2.6 to 2.7:
-
-- Completely restructured source file tree.
-
-- Much internal restructuring to eliminate a bunch of global variables.
-
-- adsl-connect now executes /etc/ppp/adsl-lost whenever connection is dropped
-  or cannot be established.
-
-- Split pppoe.c into pppoe.c and discovery.c.
-
-- Added relay agent (pppoe-relay).
-
-- Made adsl-connect script use the "-U" (host-unique) option to better support
-  multiple PPPoE links.
-
-- Added support for kernel-mode PPPoE (EXPERIMENTAL, UNSUPPORTED!)
-
-- Added "-o" option to PPPoE server; encoded server PID in pppoe-server
-  cookie.
-
-Changes from Version 2.5 to 2.6:
-
-- Code should now compile cleanly on Caldera and Slackware Linux
-
-- Fixed rp-pppoe.spec file to work on Mandrake and Red Hat.
-
-- Deleted some obsolete files
-
-- Fixed bug in Solaris/x86 port (thanks to Philippe Levan)
-
-- Made shell scripts nicer under Solaris (again, Philippe Levan)
-
-- Made adsl-status look under /var/run and /etc/ppp for PID files.  Should
-  fix problems with NetBSD.
-
-- Added PPPD_EXTRA to pppoe.conf; made the PID file depend on the config
-  file name.  This makes it easier to run multiple PPPoE sessions.
-
-Changes from Version 2.4 to 2.5:
-
-- Tested for zero-length TCP option-length field, and for reverse-packing
-  of type/code bitfields.  Thanks to Robert Schlabbach for pointing out
-  these problems.
-
-- Set umask to 077 in adsl-setup.in to protect created files like
-  /etc/ppp/pap-secrets.
-
-Changes from Version 2.3 to 2.4:
-
-- Fixed spec file to automatically add .gz extension to man files as required
-
-- Tightened firewall rules.
-
-- Better check for /var/run in adsl-status; minor shell script fixes and
-  cleanups for NetBSD and Solaris.
-
-- Added FAQ to HOW-TO-CONNECT regarding running a script each time a
-  connection is made.
-
-Changes from Version 2.2 to 2.3:
-
-- Fixed the init script to create/remove /var/lock/subsys/adsl (patch
-  courtesy of Charley Carter.)
-
-- Added support (under Linux) for N_HDLC line discipline which should
-  greatly reduce CPU usage.  My tests show it cuts CPU usage in half.
-  My 486 DX2/66 gets 800 kb/s at 22% CPU usage.
-
-- adsl-connect uses "setsid" (if available) so that adsl-stop doesn't kill
-  its caller.  There is (IMO) a bug in pppd which kills all processes in
-  its process group if the "pty" option is used.  The setsid program gets
-  around this bug, on Linux at least.
-
-- Port to Solaris, courtesy of David Holland.
-
-- Renamed spec file from "spec" to "rp-pppoe.spec" and made some cleanups.
-  NOTE: Red Hat, in their infinite wisdom, decided to make the new RPM
-  compress man pages automatically.  You may have problems building RPM's
-  from source unless you get the latest rpm package and make sure it
-  compresses man pages.
-
-Changes from Version 2.1 to 2.2:
-
-- Added "-f" option to pppoe to allow use of any Ethernet frame type
-  for PPPoE.  USE WITH CAUTION -- this is a workaround for broken DSL
-  providers, not something you should monkey with freely!
-
-- Added pppoe-sniff program to help expose non-standard PPPoE implementations.
-
-Changes from Version 2.0 to 2.1:
-
-- Fixed minor bugs in bounds-checking
-
-- Modified adsl-status to use output of "netstat -r -n" to determine whether
-  or not link is up.  This should make it independent of locale, I hope!
-
-- Added "-k" and "-d" options to pppoe.
-
-Changes from Version 1.9 to 2.0:
-
-- Addition of pppoe-server
-
-- Massive internal code restructuring
-
-- Zealous bounds-checking everywhere.
-
-- adsl-setup now quotes user name and password in /etc/ppp/pap-secrets.
-
-- Ported to OpenBSD, FreeBSD and NetBSD, courtesy of Geoff Mottram
-  and Yannis Sismanis.
-
-- Rearranged adsl-* shell scripts, courtesy of Heiko Schlittermann.
-
-- Fixed bug in which Host-Uniq did not work if access concentrator sent
-  a cookie.
-
-- Addition of SuSE-specific "init" script, courtesy of Gary Cameron.
-
-Changes from Version 1.8 to 1.9:
-
-- Added some more documentation to HOW-TO-CONNECT
-
-- Demand-dialling option now works correctly
-
-- SIGHUP terminates pppoe after sending a PADT to the access concentrator
-
-- Minor cleanups to connection shell scripts
-
-Changes from Version 1.7 to 1.8:
-
-- Added demand-dialling option
-
-- Clarified HOW-TO-CONNECT
-
-- Added adsl-status script
-
-- Added "restart" and "status" options to Red Hat /etc/rc.d/init.d/adsl script
-
-- Made adsl-setup check for existence of pppd
-
-- Wildcarded external interface in firewall rules
-
-- Made pppoe send a PADT frame if connection is terminated
-
-$Id$
diff --git a/mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT b/mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT
deleted file mode 100644
index 3e888af69..000000000
--- a/mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT
+++ /dev/null
@@ -1,295 +0,0 @@
-$Id$
-
-This package lets you connect a Linux machine to Sympatico HSE or Magma's
-high-speed service using a Nortel 1-meg modem.
-
-Follow these steps and you should have your high-speed service up and running.
-
-0. Install the rp-pppoe-software
---------------------------------
-
-You should have already done this by the time you're reading this.  If not,
-go back and read README.
-
-1. Set up your Ethernet hardware
---------------------------------
-
-First, make sure the Ethernet card you intend to use with the modem is
-visible to the Linux kernel.  Just how to do this is beyond the scope
-of this document.  However, if the card is the only Ethernet card in
-the system, executing:
-
-	ifconfig eth0
-
-should display something like this:
-
-	eth0      Link encap:Ethernet  HWaddr 00:60:67:62:31:D4  
-
-plust some more lines.  Your HWaddr will be different.  As long as you see
-the HWaddr line, your card should be working.
-
-DO NOT assign an IP address to the Ethernet card.  DO NOT configure the
-card to come up at boot time.
-
-2. Configure various files
---------------------------
-
-Several files need editing.  The easiest way to do this is to run
-the following command as root:
-
-	adsl-setup
-
-Answer the questions and you should be all set.  If you want to know what
-goes on behind the scenes, continue reading this document.  If you don't
-care and your connection works, stop reading. :-)
-
-3. Edit pap-secrets
--------------------
-
-Edit the "pap-secrets" file, inserting your proper user-ID and password.
-Install the file (or copy the relevant lines) to /etc/ppp/pap-secrets.
-Your ISP may use CHAP authentication.  In this case, add the line to
-/etc/ppp/chap-secrets.
-
-4. Edit /etc/ppp/pppoe.conf
------------------------------
-
-The file /etc/ppp/pppoe.conf contains configuration information for the
-ADSL connection.  You need to edit the following items:
-
-- Change ETH=eth1 to the correct Ethernet device for your modem.
-- Change USER=bxxxnxnx@sympatico.ca to your proper ADSL user-ID.
-
-Don't edit any of the other settings unless you're an expert.
-
-5. Set up DNS
--------------
-
-If you are using DNS servers supplied by your ISP, edit the file
-/etc/resolv.conf to contain these lines:
-
-	nameserver ip_addr_of_first_dns_server
-	nameserver ip_addr_of_second_dns_server
-
-For example:
-
-	nameserver 204.101.251.1
-	nameserver 204.101.251.2
-
-
-6. Firewall your machine
-------------------------
-
-MAKE SURE YOU FIREWALL YOUR MACHINE.  A sample firewall script is given
-in the shell script "firewall"  To install the script:
-
-a) Copy it to /etc/rc.d/init.d/firewall
-b) Type: chkconfig firewall on
-c) Start the firewall: sh /etc/rc.d/init.d/firewall start
-
-(The above procedure works ONLY on Red Hat-like systems.)
-
-You may want to tweak the script somewhat.
-
-7. Bring up the connection at boot time
----------------------------------------
-
-On a Red Hat system, the installation procedure should have installed
-a script called /etc/rc.d/init.d/adsl.  To bring up the connection
-at boot time, just type this command as root:
-
-	chkconfig --add adsl
-
-On non-Red-Hat systems, add this line to the end
-of /etc/rc.d/rc.local:
-
-	/usr/sbin/adsl-start
-
-8. Configure LAN Hosts
-----------------------
-
-If you have a LAN behind the firewall, you have to lower the TCP
-maximum segment size from the normal 1460 to 1452 (or better, 1412.)
-You have two options: Either set the MTU of all the interfaces on
-other hosts on the LAN to 1452, or use the "-m 1412" option to pppoe.
-The "-m" option for pppoe is far simpler and makes it easier to add
-hosts to the LAN, but consumes some extra CPU time.
-
-If you want to manually configure the LAN hosts, here's how:
-
-In Linux, use: "ifconfig eth0 mtu 1452".  For best results, put this
-in an /etc/rc.d/rc.local script.
-
-For Windows, machines, see http://lan.cns.ksu.edu/OS/WIN95/slip95.htm.
-Set the MaxMTU to 1452.
-
-9. Commands to control the ADSL link
-------------------------------------
-
-As root, bring up the link by typing:   adsl-start
-As root, bring down the link by typing: adsl-stop
-
-That's it!
-
---
-David F. Skoll <dfs@roaringpenguin.com> | Roaring Penguin Software Inc.
-http://www.roaringpenguin.com           | Linux and UNIX Specialists
-
-PROBLEMS!  DAVE, IT DOESN'T WORK!
----------------------------------
-
-Here are some problems PPPoE users have encountered.
-
------------------------------------------------------------------------------
-A) Can't see the Ethernet interface
-
-Well, I can't really help you here.  To use these instructions, you must
-have Linux working to the point where it recognizes your Ethernet card.
-If you type "ifconfig ethx" and you get back a HWAddr value, your Ethernet
-card is probably OK.  But I really can't help with hardware configuration
-issues.
-
------------------------------------------------------------------------------
-B) Connection seems to come up, but I can't browse the web or ping anything
-
-You probably don't have DNS set up.  See step 6.
-
------------------------------------------------------------------------------
-C) Can't compile PPPoE
-
-I have only tested compilation on 2.2-kernel machines.  Make sure you have
-"make", the C compiler and all development header files installed.
-
------------------------------------------------------------------------------
-D) pppd complains about (i) "unknown option pty" or (ii) "pty option precludes
-   specifying device name"
-
-(i) Your pppd is too old.  You need at least 2.3.7.
-(ii) Your /etc/ppp/options file is not empty.  Empty it!
-
------------------------------------------------------------------------------
-E) pppoe dies with the log message "Message too long"
-
-You set the MTU of the Ethernet interface connected to the ADSL modem
-to less than 1500.  Don't do that.
-
------------------------------------------------------------------------------
-F) Internal hosts can't see the Internet
-
-Do you have masquerading set up?  I can't help you in great detail, but
-see the IPCHAINS-HOWTO and the IP-Masquerade mini-HOWTO.
-
------------------------------------------------------------------------------
-G) Authentication fails
-
-Make sure you have the right secret in /etc/ppp/pap-secrets.  Your ISP
-may be using CHAP; it won't hurt to copy the line to /etc/ppp/chap-secrets.
-
-Also, MAKE SURE that /etc/ppp/options is EMPTY.  The "adsl-connect" script
-supplies all required options on the command line; additional options
-in /etc/ppp/options may mess things up.
-
------------------------------------------------------------------------------
-H) VPN software does not work
-
-If you are using VPN software on a Windows or Linux machine with another
-Linux machine running PPPoE as the gateway, you MUST NOT use the "-m" option
-to pppoe.  This alters IP packets, which will break any VPN which uses IPSec.
-In /etc/ppp/pppoe.conf, set CLAMPMSS to "no".  You'll also have to reduce
-the MTU on the hosts behind the gateway to 1452.
-
------------------------------------------------------------------------------
-I) I can browse some web sites just fine, but others stall forever.
-
-There is probably a buggy router or firewall between you and the Web server.
-One possible workaround:  In /etc/ppp/pppoe.conf, find the line which reads:
-
-	CLAMPMSS=1412
-
-Try lowering the 1412 until it works (go down in steps of 100 or so.)  Each
-time you lower the value, you have to restart your connection like this:
-
-	adsl-stop; adsl-start
-
-This should work around buggy routers which do not support Path MTU discovery.
-
------------------------------------------------------------------------------
-J) Whenever I connect using ADSL, my internal LAN no longer sees the gateway
-
-You are more than likely running a 2.0.X Linux kernel.  To solve this
-problem, give the Ethernet card connected to the DSL modem a fake IP
-address.  For example, if eth0 is your internal LAN card and eth1 goes to
-the DSL modem, do something like this:
-
-	ifconfig eth1 10.0.0.1 netmask 255.255.255.0
-
-(You may have to choose a different IP address; experiment.)
------------------------------------------------------------------------------
-K) How can I run a script every time I connect and get a new IP address?
-
-Put the script in /etc/ppp/ip-up.  See the pppd(8) man page.
------------------------------------------------------------------------------
-L) Nothing works!
-
-You may need to put your Ethernet card in half-duplex, 10Mb/s mode to
-work with the DSL modem.  You may have to run a DOS program to do this,
-or pass special parameters to the Linux driver.
-
-Some providers object to attempts to set the MRU or MTU.  Try removing
-"mtu 1492 mru 1492" from PPP_STD_OPTIONS in the adsl-connect script.
-This problem has been seen with an ISP in Hong Kong.
-
-Your DSL provider may be using non-standard PPPoE frames or require
-something special in the Service-Name field.  If you have two computers,
-you can try sniffing out these values with the "pppoe-sniff" program.
-Type "man pppoe-sniff" for details.  If you don't have two computers,
-you'll have to ask your DSL provider if it uses non-standard PPPoE frames
-or special Service-Name fields.  Good luck getting an answer...
-
-If pppoe-sniff indicates that nothing is amiss, make sure the Ethernet
-card associated with the ADSL modem does NOT have a valid IP address.
-(NOTE: For 2.0 kernels, you may have to give it a fake IP address
-which is not on your internal subnet.  Something like 192.168.42.42
-might work if you are not using 192.168.42.*)
-
-If you are using synchronous PPP on a slow machine, try switching to
-asynchronous PPP.
-
-Make sure no entries in the routing table go through the Ethernet card
-connected to the ADSL modem.  You might want to add these lines in
-adsl-connect:
-
-	ifconfig ethx down
-	ifconfig ethx up mtu 1500
-
-which should reset things to sane values.
-
-#######################################################################
-#                        WHEN ALL ELSE FAILS:                         #
-#######################################################################
-
-If you are completely unable to connect, run the adsl-start script in
-debugging mode.  If you are using bash as your shell (if you don't
-know what your shell is, it's probably bash), type this:
-
-	DEBUG=1 adsl-start
-
-In tcsh or csh, use:
-
-	setenv DEBUG 1; adsl-start
-
-Then follow the instructions to mail the debugging file to me.  PLEASE
-DON'T DO THIS until you have exhausted all other avenues; rp-pppoe is
-free software and it costs me time and money to help people with
-problems.  While I don't mind doing this, I do mind it if you don't
-make an effort to fix the problem yourself first.
-
-WARNING: If you run adsl-start in debugging mode and you manage to
-connect, your connection will be extremely slow and huge amounts of
-data will quickly fill your /tmp directory.  Do not use debugging mode
-unless you really cannot get your connection to work.
-
-Be aware that debugging mode produces hex dumps which potentially reveal
-your user name and password.  If the debugging output includes packets
-labeled "PPPOE Session", you may wish to remove these packets from the
-dump before mailing it to me.
diff --git a/mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE b/mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE
deleted file mode 100644
index 454c4b870..000000000
--- a/mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE
+++ /dev/null
@@ -1,39 +0,0 @@
-RP-PPPoE now supports kernel-mode PPPoE on Linux kernels 2.4.x.  However,
-the default "./go" build procedure does not make kernel-mode support.
-
-Here's what you need to do:
-
-1) Download Michal Ostrowski's patched version of pppd which supports
-a PPPoE plugin.  The latest version as of this writing is
-at http://www.math.uwaterloo.ca/~mostrows/ in
-http://www.math.uwaterloo.ca/~mostrows/ppp-2.4.0-pppoe4.tgz.  It is
-also mirrored at http://www.roaringpenguin.com/pppoe/
-
-2) Unpack that version of pppd and build and install it.
-
-3) In the rp-pppoe directory, change to src/ and type:
-
-	./configure --enable-plugin=/path/to/ppp-tree
-
-Here, /path/to/ppp-tree is where you unpacked the pppd software.  It
-should be the directory named ppp-2.4.0.pppoe
-
-4) Type make; make install
-
-5) Edit /etc/ppp/pppoe.conf to include this line:
-
-	LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so
-
-6) Make sure your kernel was built with support for PPP, PPPOX and that
-all modules are locatable by modprobe.  Make sure you have a /dev/ppp
-device:
-
-	mknod /dev/ppp c 108 0
-
-After that, adsl-start should use kernel-mode PPPoE.
-
-This code is experimental and unsupported.  Use at your own risk.
-
---
-David F. Skoll <dfs@roaringpenguin.com>
-
diff --git a/mdk-stage1/rp-pppoe/doc/LICENSE b/mdk-stage1/rp-pppoe/doc/LICENSE
deleted file mode 100644
index 9ed341535..000000000
--- a/mdk-stage1/rp-pppoe/doc/LICENSE
+++ /dev/null
@@ -1,339 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                          675 Mass Ave, Cambridge, MA 02139, USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-                            NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-                     END OF TERMS AND CONDITIONS
-
-        Appendix: How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) 19yy name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/mdk-stage1/rp-pppoe/doc/PROBLEMS b/mdk-stage1/rp-pppoe/doc/PROBLEMS
deleted file mode 100644
index f0b7d7d59..000000000
--- a/mdk-stage1/rp-pppoe/doc/PROBLEMS
+++ /dev/null
@@ -1,3 +0,0 @@
-Problems?
-
-See the last section of HOW-TO-CONNECT.
diff --git a/mdk-stage1/rp-pppoe/go b/mdk-stage1/rp-pppoe/go
deleted file mode 100755
index 305ac9ee4..000000000
--- a/mdk-stage1/rp-pppoe/go
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/bin/sh
-#***********************************************************************
-#
-# go
-#
-# Quick-start shell script to set up ADSL
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#***********************************************************************
-
-# Figure out directory of script
-MYDIR=`dirname $0`
-cd $MYDIR/src
-
-echo "Running ./configure..."
-./configure
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like ./configure failed."
-    exit 1
-fi
-
-echo "Running make..."
-make
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like make failed."
-    exit 1
-fi
-
-echo "Running make install..."
-make install
-
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like make install failed."
-    exit 1
-fi
-
-for i in a a a a a a a a a a a a a a a a a a a a a a a a a a a a ; do
-    echo ""
-done
-
-sh ../scripts/adsl-setup
diff --git a/mdk-stage1/rp-pppoe/go-gui b/mdk-stage1/rp-pppoe/go-gui
deleted file mode 100755
index ddce984fd..000000000
--- a/mdk-stage1/rp-pppoe/go-gui
+++ /dev/null
@@ -1,92 +0,0 @@
-#!/bin/sh
-#***********************************************************************
-#
-# go-gui
-#
-# Quick-start shell script to set up ADSL and GUI wrapper
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#***********************************************************************
-
-# GUI only works on Linux
-if test "`uname`" != "Linux" ; then
-    echo "Sorry, the GUI only works on Linux."
-    exit 1
-fi
-
-# Figure out directory of script
-MYDIR=`dirname $0`
-cd $MYDIR/src
-
-echo "Running ./configure..."
-./configure
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like ./configure failed."
-    exit 1
-fi
-
-echo "Running make..."
-make
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like make failed."
-    exit 1
-fi
-
-echo "Running make install..."
-make install
-
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like make install failed."
-    exit 1
-fi
-
-echo "Building GUI wrapper..."
-cd ../gui
-make
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like make failed."
-    exit 1
-fi
-
-echo "Installing GUI..."
-make install
-
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like make install failed."
-    exit 1
-fi
-
-# Install entry in KDE menu
-if test -n "$KDEDIR" ; then
-    echo "Installing KDE menu entry Internet : TkPPPoE..."
-    mkdir -p "$KDEDIR/share/applnk/Internet"
-    cat <<EOF > "$KDEDIR/share/applnk/Internet/tkpppoe.kdelnk"
-# KDE Config File
-[KDE Desktop Entry]
-Name=TkPPPoE
-Comment=Start/Stop ADSL connections
-Exec=tkpppoe
-Terminal=0
-Type=Application
-EOF
-fi
-
-# Install entry in GNOME menus
-GNOMEDIR=`gnome-config --datadir 2>/dev/null`
-if test -n "$GNOMEDIR" ; then
-    echo "Installing GNOME menu entry Internet : TkPPPoE..."
-    mkdir -p "$GNOMEDIR/gnome/apps/Internet"
-cat <<EOF > "$GNOMEDIR/gnome/apps/Internet/tkpppoe.desktop"
-[Desktop Entry]
-Name=TkPPPoE
-Comment=Start/Stop ADSL connections
-Exec=tkpppoe
-Terminal=0
-Type=Application
-EOF
-fi
-echo "Running GUI configuration tool..."
-tkpppoe &
-exit 0
diff --git a/mdk-stage1/rp-pppoe/gui/Makefile.in b/mdk-stage1/rp-pppoe/gui/Makefile.in
deleted file mode 100644
index a9b0844c0..000000000
--- a/mdk-stage1/rp-pppoe/gui/Makefile.in
+++ /dev/null
@@ -1,64 +0,0 @@
-# @configure_input@
-#***********************************************************************
-#
-# Makefile
-#
-# Makefile for GUI for Roaring Penguin's Linux user-space PPPoE client.
-#
-# Copyright (C) 2001 Roaring Penguin Software Inc.
-#
-# This program may be distributed according to the terms of the GNU
-# General Public License, version 2 or (at your option) any later version.
-#
-# $Id$
-#***********************************************************************
-DEFINES=
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-mandir=@mandir@
-install=@INSTALL@
-install_dir=@INSTALL@ -d
-sbindir=@sbindir@
-bindir=@bindir@
-
-ADSL_START_PATH=@sbindir@/adsl-start
-ADSL_STOP_PATH=@sbindir@/adsl-stop
-ADSL_STATUS_PATH=@sbindir@/adsl-status
-
-PATHS='-DADSL_START_PATH="$(ADSL_START_PATH)"' '-DADSL_STOP_PATH="$(ADSL_STOP_PATH)"' '-DADSL_STATUS_PATH="$(ADSL_STATUS_PATH)"'
-
-CFLAGS= @CFLAGS@ $(DEFINES) $(PATHS)
-
-all: pppoe-wrapper
-	@echo ""
-	@echo "Type 'make install' as root to install the software."
-
-pppoe-wrapper: wrapper.o
-	@CC@ -o pppoe-wrapper wrapper.o
-
-wrapper.o: wrapper.c
-	@CC@ $(CFLAGS) -c -o wrapper.o wrapper.c
-
-install: all
-	-mkdir -p $(RPM_INSTALL_ROOT)$(sbindir)
-	-mkdir -p $(RPM_INSTALL_ROOT)$(bindir)
-	-mkdir -p $(RPM_INSTALL_ROOT)/etc/ppp/rp-pppoe-gui
-	$(install) -m 4755 -s pppoe-wrapper $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 tkpppoe $(RPM_INSTALL_ROOT)$(bindir)
-	-mkdir -p $(RPM_INSTALL_ROOT)$(mandir)/man1
-	$(install) -m 644 pppoe-wrapper.1 $(RPM_INSTALL_ROOT)$(mandir)/man1
-	$(install) -m 644 tkpppoe.1 $(RPM_INSTALL_ROOT)$(mandir)/man1
-	-mkdir -p $(RPM_INSTALL_ROOT)/usr/share/rp-pppoe-gui
-	for i in tkpppoe.html mainwin-busy.png mainwin-nonroot.png mainwin.png props-advanced.png props-basic.png props-nic.png props-options.png ; do \
-		$(install) -m 644 html/$$i $(RPM_INSTALL_ROOT)/usr/share/rp-pppoe-gui; \
-	done
-
-clean:
-	rm -f *.o *~ pppoe-wrapper
-
-distclean: clean
-	rm -f Makefile tkpppoe
-
-.PHONY: clean
-
-.PHONY: distclean
diff --git a/mdk-stage1/rp-pppoe/gui/html/tkpppoe.html b/mdk-stage1/rp-pppoe/gui/html/tkpppoe.html
deleted file mode 100644
index 51aadb895..000000000
--- a/mdk-stage1/rp-pppoe/gui/html/tkpppoe.html
+++ /dev/null
@@ -1,181 +0,0 @@
-<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
-<html>
-<head>
-   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
-   <meta name="GENERATOR" content="Mozilla/4.76 [en] (X11; U; Linux 2.2.14-5.0 i686) [Netscape]">
-   <title>TkPPPoE Manual</title>
-</head>
-<body text="#000000" bgcolor="#FFFFFF" link="#0000EF" vlink="#59188E" alink="#FF0000">
-
-<center>
-<h1>tkpppoe - A GUI for managing PPPoE Connections</h1>
-</center>
-
-<h1>Introduction</h1>
-
-TkPPPoE is a graphical user interface for managing PPPoE connections.  It
-performs two different functions:
-<ul>
-<li>TkPPPoE lets you <em>define</em> connection properties.  This step must
-be done as root.
-<li>TkPPPoE lets you <em>start and stop</em> PPPoE connections.  This step
-may be done as a normal user, depending on how you configured the connection.
-</ul>
-
-<h1>Defining Connections</h1>
-
-To define connections, start TkPPPoE as root.  You can do this from
-a terminal by typing <code>tkpppoe</code>, or from the KDE or GNOME menus
-by selecting <b>Internet : TkPPPoE</b>.  The following window pops up:
-
-<p>
-<center><img src="mainwin.png" width="361" height="73" alt="Main Window">
-</center>
-
-<p>
-Because you have not yet defined any connections, the connection property
-window also pops up:
-
-<p>
-<center><img src="props-basic.png" width="440" height="259" alt="Connection Properties - Basic">
-</center>
-
-You can pop up the connection property window at any time by clicking
-<b>New Connection...</b>  You can edit the properties of an existing
-connection by selecting the connection's name and clicking
-<b>Properties...</b>
-<h4>Basic Information</h4>
-
-Let's fill in the basic information:
-<ul>
-<li>For <b>Connection Name</b>, enter a unique name for this connection.  It
-can be anything you like, but must contain only letters, numbers, underscores
-or dashes.  In particular, it can't contain spaces.  If you have only one
-PPPoE connection, a good name is <b>Default</b>.
-<li>For <b>User Name</b>, enter the user name supplied by your ISP.  Enter
-only the user name; do not enter an "@isp.com" part.
-<li>For <b>Network</b>, you may have to enter your ISP's domain name.
-(For example, <b>isp.com</b>.)  Some DSL providers add this to your user
-name; others do not.  You may have to experiment a bit.  The two most likely
-choices are your ISP's domain name, or blank.  Try both.
-<li>For <b>Password</b>, enter the password your ISP provided you with.
-</ul>
-
-<h4>NIC and DNS</h4>
-Click on the <b>NIC and DNS</b> tab:
-
-<p>
-<center><img src="props-nic.png" width="440" height="259" alt="Connection Properties - NIC and DNS"></center>
-<p>
-<ul>
-<li>For <b>Ethernet Interface</b>, enter the Ethernet interface connected
-to the DSL modem.  It is something like <b>eth0</b> or <b>eth1</b>.  Click
-on <b>...</b> to browse a list of detected Ethernet interfaces.
-<li>For <b>DNS Setup</b>, you have three options:
-<ol>
-<li><b>From Server</b> means that the system will obtain DNS information from
-the PPPoE server.  This is the correct choice for most ISPs.
-<li><b>Specify</b> means that you will enter the IP addresses of your DNS
-servers manually.  In this case, enter the addresses in the <b>Primary DNS</b>
-and <b>Secondary DNS</b> entries.
-<li><b>Do not Adjust</b> means that you want RP-PPPoE to leave your
-DNS setup alone.  Use this if you are running your own caching DNS server
-or know that you don't want the DNS setup touched.
-</ol>
-</ul>
-
-<h4>Options</h4>
-Click on the <b>Options</b> tab:
-
-<p>
-<center><img src="props-options.png" width="440" height="259" alt="Connection Properties - Options"></center>
-<p>
-<ul>
-<li>If you want ordinary users to be able to start and stop this connection,
-enable <b>Allow use by non-root users</b>.  If you do not enable this,
-non-root users will be able to monitor the connection, but not control it.
-<li>If you want to use synchronous PPP, enable <b>Use synchronous PPP</b>.
-This is recommended as it conserves CPU usage, but may not work on some
-(misconfigured) Linux kernels.
-<li>For <b>Firewalling</b>, you have three options:
-<ol>
-<li><b>Stand-Alone</b> installs a simple firewall ruleset for stand-alone
-machines.  Use this if you have only a single computer connected to the DSL
-modem.
-<li><b>Masquerading</b> installs a simple firewall ruleset for using
-your Linux computer as an Internet sharing device.  If you have two Ethernet
-cards, you can connect one card to the DSL modem and the other to an
-internal LAN.  The masquerading firewall ruleset lets internal machines
-share the DSL connection.
-<li><b>None</b>.  If you already have your own firewall rules, or you wish
-to run servers on your machine, select None.  This is <em>not recommended</em>
-unless you take steps to secure your machine, and know what you are doing.
-</ol>
-</ul>
-
-<h4>Advanced</h4>
-Click on the <b>Advanced</b> tab:
-
-<p>
-<center><img src="props-advanced.png" width="440" height="259" alt="Connection Properties - Advanced"></center>
-<p>
-
-In most cases, you can leave <b>AC-Name</b> and <b>Service-Name</b> blank.
-In some cases, your ISP may require you to enter information in these fields;
-contact your ISP for more information.
-
-<h1>Controlling Connections</h1>
-For these examples, run <code>tkpppoe</code> as a normal user (not root).
-The main window appears like this:
-
-<p>
-<center><img src="mainwin-nonroot.png" width="206" height="73" alt="Main Window - Non-root">
-</center>
-<p>
-<ul>
-<li>To start a connection, press <b>Start</b>.  The two LEDs flash red
-and grey.  If the connection is established, they turn green.
-<li>To stop a connection, press <b>Stop</b>.
-</ul>
-
-<p>The two rectangles to the right of the connection name are the
-<em>status LEDs</em>.  The top LED corresponds to transmitted data and
-the bottom to received.  The LEDs are colored as follows:
-<ul>
-<li>Grey -- connection is not established.
-<li>Flashing red/grey -- connection is being started.
-<li>Green -- connection is up, but idle.
-<li>Yellow -- connection is up and data is being sent or received.
-<li>Red -- connection has been lost, but the system is trying to reestablish it.
-</ul>
-
-<p>
-When a connection is established, two graphs appear:
-
-<p>
-<center><img src="mainwin-busy.png" width="206" height="73" alt="Main Window - Established Connection">
-</center>
-<p>
-
-The left (red) graph shows transmitted packets and the average
-transmission speed (in bits per second) over the sample time.  The
-right (green) graph shows received packets.
-
-<h1>Miscellaneous Information</h1>
-<ul>
-<li>The connection menu has an entry called <b>User's Manual</b> which
-will pop up this user manual (if you have Netscape installed.)
-<li>You can define multiple PPPoE connections, but you should not use
-more than one simultaneuously unless you feel comfortable editing scripts
-and setting up routing tables.  By default, TkPPPoE tries to add a default
-route for connections.  This does not work well with multiple simultaneous
-connections.
-<li>If you exit from TkPPPoE, connections which are up remain up.  You
-have to explicitly stop connections if you want them terminated.
-</ul>
-<hr>
-<a href="http://www.roaringpenguin.com/pppoe/">TkPPPoE</a> is Copyright 2001 by <a href="http://www.roaringpenguin.com">Roaring Penguin Software Inc</a> and
-is licensed under the GNU General Public License.
-<p>Screenshots show TkPPPoE running under the <a href="http://www.xfce.org">XFCE</a> desktop, a lightweight UNIX and Linux desktop.
-</body>
-</html>
diff --git a/mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1 b/mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1
deleted file mode 100644
index 4fbf2bce2..000000000
--- a/mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1
+++ /dev/null
@@ -1,45 +0,0 @@
-.\" $Id$ 
-.TH PPPOE-WRAPPER 1 "26 February 2001"
-.UC 4
-.SH NAME
-pppoe-wrapper \- SUID wrapper for starting and stopping PPPoE connections.
-.SH SYNOPSIS
-.B pppoe-wrapper start linkname
-.P
-.B pppoe-wrapper stop linkname
-.P
-.B pppoe-wrapper status linkname
-
-.SH DESCRIPTION
-\fBpppoe-wrapper\fR is a small SUID program which allows non-root users
-to start and stop PPPoE links.  It operates as follows:
-
-.TP
-.B o
-First, \fIlinkname\fR is sanity-checked.  Too-long names and names containing
-illegal characters are rejected.
-
-.TP
-.B o
-Second, \fBpppoe-wrapper\fR opens the file \fB/etc/ppp/rp-pppoe-gui/\fR\fIlinkname\fR for reading.  If that file does not contain the line:
-.nf
-
-		NONROOT=OK
-
-.fi
-then \fBpppoe-wrapper\fR fails.
-
-.TP
-.B o
-Otherwise, \fBpppoe-wrapper\fR runs \fBadsl-start\fR, \fBadsl-stop\fR or
-\fBadsl-status\fR with the above filename as its single argument.
-
-.SH AUTHOR
-\fBpppoe-wrapper\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), adsl-status(8), tkpppoe(1)
-
-
diff --git a/mdk-stage1/rp-pppoe/gui/tkpppoe.1 b/mdk-stage1/rp-pppoe/gui/tkpppoe.1
deleted file mode 100644
index 183476568..000000000
--- a/mdk-stage1/rp-pppoe/gui/tkpppoe.1
+++ /dev/null
@@ -1,36 +0,0 @@
-.\" $Id$ 
-.TH TKPPPOE 1 "26 February 2001"
-.UC 4
-.SH NAME
-tkpppoe \- Graphical interface for controlling rp-pppoe
-.SH SYNOPSIS
-.B tkpppoe
-
-.SH DESCRIPTION
-\fBtkpppoe\fR is a graphical program for controlling PPPoE links.
-It works with the RP-PPPoE package and has its own HTML manual.
-
-.SH FILES
-
-.TP
-.B /etc/ppp/rp-pppoe-gui/connection-info
-Contains connection information.  This file is not human-editable.
-
-.TP
-.B /etc/ppp/rp-pppoe-gui/passwd
-Contains passwords for each connection.  This file is not human-editable.
-
-.TP
-.B /etc/ppp/rp-pppoe-gui/conf.*
-These configuration files are used by \fBadsl-start\fR.  They are
-generated anew by \fBtkpppoe\fR each time a change is made to a
-connection's properties.
-
-.SH AUTHOR
-\fBtkpppoe\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), pppoe-wrapper(8).
-
diff --git a/mdk-stage1/rp-pppoe/gui/tkpppoe.in b/mdk-stage1/rp-pppoe/gui/tkpppoe.in
deleted file mode 100755
index 37dbf8cc1..000000000
--- a/mdk-stage1/rp-pppoe/gui/tkpppoe.in
+++ /dev/null
@@ -1,2891 +0,0 @@
-#!/bin/sh
-# -*-Mode: TCL;-*-
-
-#--------------------------------------------------------------
-#   tkpppoe
-#
-#   A graphical front-end for configuring and using rp-pppoe.
-#
-#   Copyright (C) 2001 by Roaring Penguin Software Inc.
-#   This file may be distributed under the terms of the GNU General Public
-#   License, Version 2, or (at your option) any later version.
-#
-#   The "Roaring Penguin" logo is a trademark of Roaring Penguin Software Inc.
-#
-#   http://www.roaringpenguin.com
-#
-#--------------------------------------------------------------
-
-# $Id$
-
-# the next line restarts using wish \
-umask 022; \
-exec wish "$0" "$@" || clear; echo "*****"; echo "Cannot find 'wish' -- you need Tcl/Tk installed to run this program"; exit 1
-
-# Set app name
-tk appname TkPPPoE
-
-# Set this to one if you want to allow multiple instances of TkPPPoE
-set AllowMultipleInstances 0
-
-# Check for other instances
-if {"[tk appname]" != "TkPPPoE"} {
-    # Must be another instance running...
-    if {!$AllowMultipleInstances} {
-	send TkPPPoE AnotherInstance
-	exit 0
-    }
-}
-
-# Location of config directory
-set ConfigDir /etc/ppp/rp-pppoe-gui
-
-# Are we running as root?
-set Admin 0
-
-# Location of connection info file
-set ConnectionInfoFile [file join $ConfigDir connection-info]
-
-# Location of password file
-set PasswordFile [file join $ConfigDir passwd]
-
-# Location of "already run" file
-set AlreadyRunFile [file join $ConfigDir gui-already-run]
-
-# Connection information
-set ConnectionInfo {}
-
-# Connection options
-set OPTS(nonroot) 0
-set OPTS(sync) 1
-
-# Location of wrapper
-set Wrapper "@WRAPPER@"
-
-# Timer token for UpdateConnectionState
-set UpdateToken {}
-
-# Update interval in milliseconds
-set UpdateInterval 500
-
-# Packet counters for signalling activity
-set Packets(in) 0
-set Packets(out) 0
-set Bytes(in) 0
-set Bytes(out) 0
-set MeasureTime 0
-
-# Set up some options to make it look better
-option add *Button.borderWidth 1
-option add *Button.Pad 1
-option add *Menubutton.borderWidth 1
-option add *Menubutton.Pad 1
-option add *Entry.Background white
-
-# Array holding help strings for windows
-array set HelpData {}
-
-bind HelpWin <Enter> "HelpWindowEntered %W"
-bind HelpWin <Leave> "HelpWindowLeft %W"
-
-proc AnotherInstance {} {
-    wm deiconify .
-    raise .
-}
-
-#***********************************************************************
-# %PROCEDURE: HelpWindowEntered
-# %ARGUMENTS:
-#  w -- window
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Looks for procedure in HelpData; evals it if found.
-#***********************************************************************
-proc HelpWindowEntered { w } {
-    global HelpData
-    if {[info exists HelpData($w)]} {
-	set cmd "$HelpData($w) Enter"
-	uplevel #0 $cmd
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: HelpWindowLeft
-# %ARGUMENTS:
-#  w -- window
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Looks for procedure in HelpData; evals it if found.
-#***********************************************************************
-proc HelpWindowLeft { w } {
-    global HelpData
-    if {[info exists HelpData($w)]} {
-	set cmd "$HelpData($w) Leave"
-	uplevel #0 $cmd
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: RegisterHelpWindow
-# %ARGUMENTS:
-#  w -- window we need help about
-#  helptext -- the help text
-#  win -- window in which to put help messages
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Sets things up so help text appears in "$win" when mouse enters "$w"
-#***********************************************************************
-proc RegisterHelpWindow {w helptext win} {
-    global HelpData
-    set tags [bindtags $w]
-    if {[lsearch -exact $tags HelpWin] < 0} {
-	lappend tags HelpWin
-	bindtags $w $tags
-    }
-    set HelpData($w) [list HelpInTextWin $helptext $win]
-}
-
-#***********************************************************************
-# %PROCEDURE: HelpInTextWin
-# %ARGUMENTS:
-#  text -- help text
-#  tw -- window in which to write text
-#  what -- one of "Enter" or "Leave"
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Clears out $tw; if $what is "Enter", puts $text in $tw.
-#***********************************************************************
-proc HelpInTextWin {text tw what} {
-    $tw configure -state normal
-    $tw delete 1.0 end
-    if {"$what" == "Enter"} {
-	$tw insert end $text
-    }
-    $tw configure -state disabled
-}
-
-
-#***********************************************************************
-# %PROCEDURE: drawLogo
-# %ARGUMENTS:
-#  c -- canvas to draw logo in
-#  bg -- background color of canvas
-#  pencolor -- color of the word "Penguin"
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Draws Roaring Penguin logo in a Tcl canvas
-#***********************************************************************
-proc drawLogo { c bg {pengcolor #6699cc} } {
-    $c create polygon 372.249 5.182 361.23 5.519 \
-	    346.164 8.892 316.482 20.023 305.463 17.774 296.468 \
-	    19.573 288.935 24.97 282.864 33.177 267.348 55.102 \
-	    254.531 77.814 236.204 125.26 225.635 174.844 \
-	    221.026 226.113 213.605 228.025 208.658 232.634 \
-	    225.523 240.28 250.708 243.316 282.752 242.416 \
-	    320.079 238.818 330.985 193.17 338.181 146.735 \
-	    338.743 99.963 335.483 76.577 329.524 53.191 345.602 \
-	    48.131 353.135 45.995 359.768 41.048 342.679 43.184 \
-	    324.689 40.036 334.583 28.905 348.3 18.674 372.249 \
-	    5.182 -fill #000000 -outline {} -width 1 -tags logo
-
-    $c create line 372.249 5.182 361.23 5.519 \
-	    346.164 8.892 316.482 20.023 305.463 17.774 296.468 \
-	    19.573 288.935 24.97 282.864 33.177 267.348 55.102 \
-	    254.531 77.814 236.204 125.26 225.635 174.844 \
-	    221.026 226.113 213.605 228.025 208.658 232.634 \
-	    225.523 240.28 250.708 243.316 282.752 242.416 \
-	    320.079 238.818 330.985 193.17 338.181 146.735 \
-	    338.743 99.963 335.483 76.577 329.524 53.191 345.602 \
-	    48.131 353.135 45.995 359.768 41.048 342.679 43.184 \
-	    324.689 40.036 334.583 28.905 348.3 18.674 372.249 \
-	    5.182  -tags logo
-
-    $c create polygon 298.605 109.632 290.734 \
-	    159.328 282.752 182.939 271.958 205.65 262.851 \
-	    171.133 263.75 138.752 264.537 164.5 271.958 192.833 \
-	    286.687 157.192 298.605 109.632 -fill #ffffff \
-	    -outline {} -width 1  -tags logo
-
-    $c create line 298.605 109.632 290.734 159.328 \
-	    282.752 182.939 271.958 205.65 262.851 171.133 \
-	    263.75 138.752 264.537 164.5 271.958 192.833 286.687 \
-	    157.192 298.605 109.632  -tags logo
-
-    $c create polygon 312.546 30.592 315.132 35.876 \
-	    310.747 39.586 308.161 34.414 312.546 30.592 -fill \
-	    #ffffff -outline {} -width 1  -tags logo
-
-    $c create line 312.546 30.592 315.132 35.876 \
-	    310.747 39.586 308.161 34.414 312.546 30.592  -tags logo
-
-    $c create polygon 328.624 54.427 322.665 58.7 \
-	    314.458 61.286 289.16 59.15 284.55 74.665 285.338 \
-	    90.181 303.214 98.951 308.499 106.259 310.523 \
-	    116.378 305.913 130.208 312.771 141.563 308.049 \
-	    167.76 299.729 192.158 279.041 238.593 313.558 \
-	    233.871 327.388 185.75 335.033 139.989 335.82 96.253 \
-	    328.624 54.427 -fill #ffffff -outline {} -width 1  -tags logo
-
-    $c create line 328.624 54.427 322.665 58.7 \
-	    314.458 61.286 289.16 59.15 284.55 74.665 285.338 \
-	    90.181 303.214 98.951 308.499 106.259 310.523 \
-	    116.378 305.913 130.208 312.771 141.563 308.049 \
-	    167.76 299.729 192.158 279.041 238.593 313.558 \
-	    233.871 327.388 185.75 335.033 139.989 335.82 96.253 \
-	    328.624 54.427  -tags logo
-
-    $c create polygon 53.837 185.412 54.399 185.862 \
-	    53.837 188.223 54.399 188.673 53.837 188.673 53.837 \
-	    189.572 53.837 190.472 53.387 191.034 52.938 192.833 \
-	    50.577 195.644 49.677 196.656 49.677 197.105 48.215 \
-	    198.455 47.316 198.904 46.866 198.904 44.505 200.816 \
-	    43.606 200.366 42.594 201.265 42.144 201.715 41.245 \
-	    202.277 40.795 202.727 40.345 202.277 39.783 202.277 \
-	    36.972 203.177 36.522 203.177 36.073 203.177 35.623 \
-	    203.627 34.723 203.627 34.161 203.627 34.161 204.076 \
-	    30.901 204.526 28.54 205.538 26.291 205.088 25.729 \
-	    205.088 24.829 205.088 24.38 204.526 23.93 204.526 \
-	    23.48 204.526 22.918 205.088 22.918 206.437 22.918 \
-	    206.887 22.918 207.337 22.468 207.337 22.468 208.798 \
-	    22.018 209.248 22.018 211.16 22.018 211.609 21.569 \
-	    213.521 21.119 215.769 21.569 216.781 20.669 218.13 \
-	    20.669 219.592 20.669 220.042 20.107 220.941 20.107 \
-	    221.953 20.107 223.752 19.657 225.664 19.208 226.113 \
-	    19.657 227.013 18.308 230.835 17.858 240.167 17.296 \
-	    248.15 17.296 249.05 16.846 250.062 15.947 250.062 \
-	    15.048 250.062 15.048 250.511 12.686 251.86 12.237 \
-	    251.86 11.675 251.411 11.675 250.511 11.675 246.689 \
-	    11.225 245.339 11.225 243.878 10.775 240.617 11.225 \
-	    239.268 11.225 238.818 10.775 238.256 10.325 237.357 \
-	    10.325 236.007 9.876 232.634 9.876 231.735 9.876 \
-	    231.285 9.876 230.835 9.876 230.386 9.876 229.824 \
-	    9.426 229.374 9.426 226.113 9.876 226.113 9.876 \
-	    225.664 9.426 224.202 9.426 223.752 9.426 223.302 \
-	    10.325 221.953 9.426 220.941 9.426 219.592 9.426 \
-	    219.142 9.426 218.58 9.426 217.681 9.426 217.231 \
-	    9.426 216.781 8.864 216.332 8.864 214.42 8.864 \
-	    213.97 8.414 213.521 8.414 210.148 8.414 209.248 \
-	    7.964 207.899 8.414 205.988 8.414 204.526 7.065 \
-	    201.265 7.515 200.816 9.426 201.715 10.325 201.265 \
-	    10.775 200.816 10.775 198.904 11.225 198.005 11.225 \
-	    197.555 10.775 197.555 9.876 196.094 9.426 194.744 \
-	    7.515 194.295 6.615 193.845 6.053 193.845 5.153 \
-	    193.283 3.804 191.484 3.804 190.022 3.804 189.572 \
-	    3.804 189.123 3.242 188.673 3.242 186.762 3.804 \
-	    185.412 4.254 184.85 4.704 184.4 7.964 180.24 10.325 \
-	    178.779 11.225 178.779 12.237 177.879 14.036 176.98 \
-	    15.497 175.968 21.569 173.607 22.918 173.157 23.48 \
-	    173.157 24.38 172.707 24.829 172.707 29.102 171.808 \
-	    29.551 171.808 30.001 171.358 31.35 170.796 31.913 \
-	    171.358 32.362 170.796 39.783 171.358 40.345 170.796 \
-	    42.144 171.358 47.766 174.619 48.778 176.418 49.227 \
-	    176.418 49.677 176.98 50.127 176.98 51.588 178.329 \
-	    52.038 179.228 52.488 180.69 52.038 181.14 52.038 \
-	    181.59 52.488 182.039 52.938 182.039 53.387 182.601 \
-	    53.837 183.051 53.837 183.501 53.837 185.412 -fill \
-	    $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 42.594 222.853 43.156 221.953 \
-	    41.694 222.403 39.783 224.202 39.783 224.764 39.783 \
-	    225.214 40.345 225.214 41.245 224.202 41.694 223.752 \
-	    42.594 222.853 -fill $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 58.559 234.096 59.009 234.096 \
-	    59.009 234.546 58.559 234.995 58.559 235.445 57.21 \
-	    236.907 56.648 237.806 52.938 241.067 52.038 241.629 \
-	    52.038 242.079 51.026 242.529 50.577 242.978 50.127 \
-	    242.978 49.227 244.44 45.405 246.239 44.055 246.689 \
-	    43.606 246.689 43.606 247.251 42.144 247.251 41.694 \
-	    247.7 40.795 247.7 38.434 248.15 36.522 248.15 \
-	    35.173 247.7 34.161 246.689 33.711 246.239 32.812 \
-	    244.44 32.362 241.629 32.812 239.718 32.812 239.268 \
-	    33.711 234.995 36.522 229.824 35.623 228.474 35.623 \
-	    227.013 36.522 225.664 37.534 224.202 38.883 222.853 \
-	    41.694 220.492 42.594 219.592 43.156 219.592 43.606 \
-	    219.142 45.405 217.681 45.967 217.681 46.416 217.231 \
-	    48.778 215.769 52.038 214.87 53.387 214.42 54.849 \
-	    214.87 55.299 214.87 56.198 215.769 56.198 217.681 \
-	    56.198 218.58 54.399 221.953 53.837 222.853 53.837 \
-	    223.302 53.387 223.752 50.577 226.113 49.677 226.563 \
-	    47.316 228.474 43.156 230.386 41.245 230.835 40.795 \
-	    230.835 40.345 230.835 39.333 230.835 38.883 230.835 \
-	    38.883 229.824 39.783 229.374 40.795 228.474 41.694 \
-	    228.025 42.594 227.575 45.967 227.013 46.866 226.563 \
-	    50.127 224.764 51.588 223.302 52.488 221.953 52.488 \
-	    220.492 52.488 219.142 51.026 218.13 49.677 218.13 \
-	    48.778 218.13 47.766 219.142 47.316 219.142 47.316 \
-	    219.592 46.866 219.592 45.967 220.941 44.505 221.953 \
-	    44.055 222.403 43.606 222.853 42.594 223.752 41.694 \
-	    225.664 41.245 225.664 41.245 226.113 40.345 226.563 \
-	    39.333 227.575 39.333 228.474 38.434 229.374 36.522 \
-	    233.197 35.623 236.457 35.623 237.357 35.623 238.256 \
-	    35.173 241.067 35.623 242.079 36.522 243.428 37.534 \
-	    243.878 37.984 244.44 38.434 244.89 38.883 244.89 \
-	    39.783 245.339 43.156 245.339 45.967 244.44 49.227 \
-	    242.529 50.127 241.629 50.577 241.067 54.399 238.818 \
-	    54.399 238.256 54.399 237.806 56.198 236.907 58.559 \
-	    234.096 -fill $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 92.289 248.6 92.739 249.05 \
-	    92.289 249.05 91.84 249.05 90.94 248.6 90.378 248.6 \
-	    89.478 247.7 89.029 247.251 88.129 246.689 87.117 \
-	    245.789 85.768 244.89 85.318 244.44 85.768 244.44 \
-	    85.318 242.529 84.756 242.079 84.756 240.617 84.756 \
-	    240.167 84.756 239.718 84.756 239.268 83.857 236.457 \
-	    83.407 234.096 83.407 233.197 83.407 231.735 83.407 \
-	    223.302 83.407 221.391 82.957 220.941 82.508 221.953 \
-	    80.596 226.113 80.146 226.563 80.146 227.013 79.697 \
-	    228.025 79.135 228.474 79.697 228.474 76.324 234.096 \
-	    75.874 234.995 75.424 236.457 74.975 236.457 74.975 \
-	    236.907 74.975 237.357 74.075 239.268 73.513 239.718 \
-	    73.063 240.167 72.613 241.067 72.164 242.529 71.714 \
-	    242.529 71.714 243.878 70.252 245.789 69.803 246.689 \
-	    68.903 246.689 68.903 247.251 67.891 247.7 66.542 \
-	    247.7 66.092 247.7 65.643 247.7 65.08 247.251 65.08 \
-	    246.689 65.08 245.789 64.631 242.079 65.08 242.079 \
-	    64.631 241.629 65.08 241.067 65.08 238.818 64.631 \
-	    237.806 64.631 236.457 64.631 234.546 64.631 233.197 \
-	    64.631 232.634 64.631 232.185 64.631 231.735 64.631 \
-	    228.924 64.631 227.575 64.631 225.664 64.631 225.214 \
-	    64.631 224.764 64.631 223.302 64.631 217.231 65.08 \
-	    216.332 65.643 215.769 69.803 214.87 70.252 215.32 \
-	    70.252 216.332 70.252 217.681 70.252 218.58 69.803 \
-	    219.142 69.803 220.492 69.353 220.941 69.353 221.391 \
-	    68.903 221.953 68.903 225.664 68.453 226.563 68.453 \
-	    228.025 68.453 228.474 67.891 228.924 67.891 230.835 \
-	    68.453 236.457 68.453 237.806 68.453 238.818 68.453 \
-	    240.617 68.453 241.067 68.903 241.067 68.903 241.629 \
-	    69.353 241.629 70.702 241.067 70.702 240.617 71.264 \
-	    240.167 71.264 239.268 72.164 238.256 73.063 236.457 \
-	    74.525 234.546 74.975 233.197 76.324 230.835 77.336 \
-	    229.824 78.235 227.575 78.235 227.013 78.685 226.563 \
-	    78.685 225.664 79.135 225.214 79.697 224.764 79.697 \
-	    224.202 80.146 222.403 81.046 220.941 81.945 217.681 \
-	    82.957 215.769 85.318 214.87 85.768 214.87 87.567 \
-	    214.42 87.567 215.769 87.117 216.332 87.567 216.781 \
-	    88.129 219.592 87.567 219.592 87.567 220.492 87.567 \
-	    221.391 87.567 224.764 87.567 225.664 87.567 226.113 \
-	    87.117 226.113 87.117 227.575 87.567 229.374 88.579 \
-	    235.445 89.029 239.268 89.029 239.718 89.029 241.067 \
-	    89.478 242.529 89.478 242.978 89.928 243.878 89.928 \
-	    244.44 90.378 244.89 90.94 246.239 92.289 248.6 \
-	    -fill $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 117.587 220.492 118.037 \
-	    222.403 117.587 222.853 117.587 224.764 116.687 \
-	    226.113 116.687 227.013 116.238 228.025 114.776 \
-	    229.374 113.877 231.285 112.865 231.735 109.154 \
-	    234.995 106.343 236.457 105.444 237.357 103.982 \
-	    237.806 103.083 238.256 102.633 238.818 102.183 \
-	    238.818 101.172 239.268 99.822 239.718 98.361 \
-	    239.268 97.461 239.718 96.562 239.268 96.0 238.818 \
-	    95.55 238.818 94.201 236.907 94.201 235.445 94.201 \
-	    233.646 94.65 233.197 94.65 232.634 95.1 232.185 \
-	    95.1 231.735 95.55 231.735 96.0 230.386 97.461 \
-	    228.025 97.461 227.575 98.361 226.563 99.822 224.764 \
-	    101.172 223.302 101.172 222.853 102.633 221.391 \
-	    103.083 220.941 104.432 219.592 103.982 218.58 \
-	    103.982 217.231 103.982 216.781 103.982 215.32 \
-	    104.432 214.42 103.982 210.148 103.982 209.698 \
-	    103.982 209.248 104.432 208.798 104.432 207.899 \
-	    104.432 205.988 104.432 205.538 104.994 203.177 \
-	    104.994 202.277 104.994 201.265 104.994 200.816 \
-	    104.994 200.366 104.994 199.916 105.894 199.467 \
-	    106.343 198.904 106.793 198.455 107.243 198.904 \
-	    108.255 198.904 108.255 199.467 108.705 199.467 \
-	    108.705 202.727 108.255 204.076 108.255 205.538 \
-	    108.255 205.988 107.805 205.988 107.805 206.887 \
-	    107.805 209.698 107.243 210.71 106.793 212.059 \
-	    106.343 214.87 106.343 215.32 106.343 215.769 \
-	    105.894 217.681 106.343 217.681 106.793 217.681 \
-	    107.243 217.231 108.705 215.32 109.604 215.32 \
-	    110.054 214.42 110.054 213.97 110.616 213.97 110.616 \
-	    214.42 111.965 214.87 112.415 214.87 112.865 215.32 \
-	    114.326 216.332 116.238 217.681 116.687 218.58 \
-	    117.137 219.592 117.587 220.042 117.587 220.492 \
-	    -fill $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 123.658 258.944 123.658 \
-	    259.394 123.658 260.293 123.658 261.755 123.658 \
-	    262.654 123.658 263.104 123.209 266.364 123.209 \
-	    267.376 122.759 269.175 122.309 269.737 121.859 \
-	    271.087 121.859 271.536 121.859 271.986 121.297 \
-	    271.986 121.297 272.548 120.847 273.448 120.398 \
-	    273.448 120.398 273.897 118.486 276.259 118.037 \
-	    276.708 117.587 277.608 117.137 278.17 116.687 \
-	    278.17 115.675 278.62 115.675 279.069 113.427 \
-	    280.419 112.865 280.981 112.415 280.981 111.965 \
-	    281.43 110.054 282.33 109.154 282.33 108.705 282.78 \
-	    108.255 282.78 107.805 283.229 104.994 283.792 \
-	    104.432 283.792 103.982 283.792 103.533 283.792 \
-	    103.083 283.792 102.633 283.792 102.183 283.792 \
-	    101.172 283.792 100.722 283.792 99.822 283.792 98.81 \
-	    283.792 96.562 282.33 96.0 282.78 95.1 281.88 94.201 \
-	    281.43 91.84 279.969 92.289 279.519 92.289 278.62 \
-	    93.751 279.069 93.751 279.519 94.201 279.519 94.65 \
-	    279.969 95.1 279.969 96.0 280.981 98.81 281.88 \
-	    101.172 281.88 101.621 281.88 102.633 281.88 103.083 \
-	    281.88 103.533 281.88 104.432 281.43 104.994 281.88 \
-	    105.444 281.43 106.793 281.43 107.805 280.981 \
-	    108.705 280.419 109.154 280.419 109.604 279.969 \
-	    110.054 279.969 110.616 279.969 111.066 279.519 \
-	    112.865 278.17 113.427 277.608 113.877 277.608 \
-	    113.877 277.158 114.326 277.158 114.326 276.708 \
-	    114.776 276.259 115.226 276.259 116.238 274.347 \
-	    116.687 274.347 116.687 273.897 117.587 272.998 \
-	    117.587 272.548 118.037 271.986 119.498 267.826 \
-	    120.398 265.015 120.398 262.204 119.948 259.843 \
-	    119.948 259.394 119.948 258.944 119.498 257.482 \
-	    118.486 254.222 118.037 253.772 117.587 251.86 \
-	    115.675 249.05 115.226 248.6 114.776 248.15 113.877 \
-	    247.251 111.965 246.239 111.515 246.239 110.616 \
-	    246.239 110.054 246.239 109.154 246.239 107.243 \
-	    247.251 106.343 247.251 105.444 247.7 104.994 247.7 \
-	    103.083 248.15 102.183 248.6 101.621 248.6 101.172 \
-	    249.05 100.722 249.499 99.822 250.062 98.361 250.062 \
-	    97.461 249.499 97.012 249.499 96.562 249.05 96.562 \
-	    248.6 97.012 248.15 99.822 245.789 100.272 245.339 \
-	    101.621 244.44 101.621 243.878 102.183 243.428 \
-	    102.633 243.428 102.633 242.978 103.982 241.629 \
-	    103.982 241.067 103.982 240.617 103.982 240.167 \
-	    105.444 239.268 108.705 236.907 108.705 236.457 \
-	    109.154 236.457 110.054 235.445 111.066 234.546 \
-	    112.415 234.096 112.865 233.646 113.427 233.646 \
-	    113.877 233.646 113.877 234.096 114.326 234.995 \
-	    114.776 235.445 114.776 236.457 114.326 237.357 \
-	    113.427 238.818 112.415 239.268 112.415 240.167 \
-	    111.965 240.167 111.515 240.617 110.054 241.629 \
-	    110.054 242.079 109.604 242.529 108.705 242.978 \
-	    110.054 242.978 113.427 242.079 114.326 242.529 \
-	    115.226 242.978 116.687 244.44 119.048 246.689 \
-	    119.498 247.7 119.498 248.15 119.948 248.6 119.948 \
-	    249.05 120.398 249.05 120.398 249.499 120.847 \
-	    249.499 120.847 250.062 121.297 250.511 121.297 \
-	    251.411 121.859 252.31 122.759 252.872 122.759 \
-	    254.222 122.759 254.671 123.658 258.494 123.658 \
-	    258.944 -fill $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 147.607 215.769 148.506 215.32 \
-	    148.506 217.231 148.506 217.681 148.506 218.13 \
-	    148.956 218.58 148.506 220.492 148.506 220.941 \
-	    148.506 222.853 148.956 224.764 148.956 226.113 \
-	    148.506 226.563 148.956 226.563 148.506 228.924 \
-	    148.956 229.824 148.956 231.285 148.506 232.185 \
-	    148.956 232.634 148.956 233.646 149.405 234.995 \
-	    148.956 234.995 149.405 235.445 149.405 236.907 \
-	    149.405 237.357 149.968 238.818 150.867 240.167 \
-	    150.867 240.617 151.317 242.079 152.216 243.428 \
-	    153.228 245.339 154.128 245.789 155.027 246.239 \
-	    156.939 245.789 157.388 246.239 156.489 246.689 \
-	    155.027 247.7 154.128 247.7 153.228 247.7 152.216 \
-	    247.7 151.767 247.7 150.867 247.251 150.417 246.239 \
-	    149.405 246.239 148.056 245.339 147.607 244.44 \
-	    147.157 243.428 145.695 241.629 145.695 240.617 \
-	    145.245 240.167 145.245 239.718 144.796 238.256 \
-	    144.346 236.907 144.346 235.445 143.784 234.546 \
-	    143.784 233.197 143.784 232.185 143.784 230.835 \
-	    143.334 229.824 143.784 229.374 143.334 229.374 \
-	    143.334 228.474 142.884 230.386 141.985 231.735 \
-	    140.973 233.197 140.523 234.096 140.523 234.546 \
-	    140.523 234.995 139.624 236.457 139.174 237.806 \
-	    138.162 239.718 137.263 241.067 136.813 242.079 \
-	    135.913 242.978 134.452 244.89 134.002 245.789 \
-	    133.552 245.789 132.091 246.689 131.191 247.251 \
-	    129.73 248.15 129.28 248.15 128.38 247.7 128.38 \
-	    248.15 126.919 247.7 126.019 247.251 125.12 246.239 \
-	    125.12 245.339 124.67 244.89 124.67 244.44 124.67 \
-	    243.428 124.67 242.529 124.67 241.067 124.67 239.718 \
-	    125.12 239.268 124.67 239.268 124.67 238.256 125.12 \
-	    237.806 125.12 237.357 125.12 236.907 125.12 236.007 \
-	    125.12 234.096 125.57 233.197 125.57 232.185 126.019 \
-	    232.185 126.019 231.285 126.019 230.386 126.019 \
-	    229.374 126.469 228.474 126.469 227.013 126.469 \
-	    225.214 126.019 225.214 126.469 225.214 126.019 \
-	    223.302 126.019 221.953 126.019 220.492 125.57 \
-	    220.042 125.12 219.592 124.108 219.142 123.209 \
-	    219.142 121.859 220.042 121.297 220.042 120.398 \
-	    220.941 119.498 221.391 119.048 221.391 118.486 \
-	    221.953 118.037 221.953 118.037 221.391 118.486 \
-	    220.941 119.498 220.042 120.847 219.142 122.759 \
-	    217.681 124.108 216.781 125.12 215.769 126.469 \
-	    214.87 126.919 214.87 127.481 214.87 128.38 214.87 \
-	    128.83 214.87 129.73 214.87 129.73 215.769 130.292 \
-	    215.769 130.742 216.781 130.742 217.681 130.292 \
-	    219.142 130.292 221.953 130.292 223.302 130.292 \
-	    224.202 129.73 225.214 129.28 227.013 128.83 227.575 \
-	    129.28 227.575 129.28 228.474 128.83 229.374 129.28 \
-	    229.824 129.28 230.386 128.83 231.735 128.38 234.096 \
-	    128.38 234.995 127.931 236.457 127.931 239.268 \
-	    127.931 240.167 127.931 241.629 128.83 242.978 \
-	    129.28 243.878 129.73 244.44 130.742 244.44 131.191 \
-	    244.44 132.091 244.44 133.103 243.878 134.002 \
-	    242.978 134.902 242.079 135.351 241.067 135.913 \
-	    240.167 136.363 239.268 136.813 238.818 137.263 \
-	    237.806 137.712 236.907 138.162 235.445 138.724 \
-	    234.546 139.174 233.646 139.624 232.634 140.523 \
-	    230.835 140.973 228.924 141.535 227.013 142.435 \
-	    225.664 142.884 223.302 143.334 221.391 143.334 \
-	    220.941 143.334 219.142 144.346 217.681 144.796 \
-	    216.781 145.695 216.332 146.595 216.332 147.607 \
-	    215.769 -fill $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 165.371 241.067 165.371 \
-	    241.067 164.921 243.878 164.921 246.239 163.46 \
-	    246.689 161.211 247.251 160.649 247.251 160.199 \
-	    244.44 160.199 243.878 160.199 243.428 160.199 \
-	    242.079 160.199 240.167 160.199 239.718 159.749 \
-	    239.268 160.199 237.806 159.749 237.357 159.749 \
-	    236.007 159.749 230.835 159.749 229.824 159.749 \
-	    228.924 159.749 226.113 159.749 225.664 159.749 \
-	    223.752 159.749 222.853 159.749 218.58 159.749 \
-	    218.13 159.749 217.681 160.199 217.231 161.661 \
-	    216.781 162.11 216.781 162.56 216.781 163.46 216.781 \
-	    164.022 219.142 163.46 222.403 163.46 222.853 163.46 \
-	    224.202 163.46 225.664 163.46 226.563 163.46 227.013 \
-	    163.46 228.924 163.01 230.835 163.01 232.634 163.46 \
-	    233.197 164.022 232.634 164.472 232.634 164.921 \
-	    232.185 164.921 231.735 165.371 231.735 165.821 \
-	    232.185 165.371 233.646 165.821 236.007 165.371 \
-	    238.256 165.371 238.818 165.371 240.617 165.371 \
-	    241.067 -fill $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 165.821 214.42 166.833 215.32 \
-	    166.271 215.32 165.821 216.332 165.371 216.332 \
-	    165.371 216.781 165.821 217.681 165.821 218.13 \
-	    165.371 219.142 165.371 220.042 164.921 222.853 \
-	    165.371 224.764 164.921 225.664 165.371 227.575 \
-	    165.371 228.474 164.921 228.474 164.472 227.575 \
-	    164.472 226.113 164.022 224.764 164.472 224.202 \
-	    164.472 223.752 164.472 222.403 164.921 214.87 \
-	    164.472 213.521 164.472 212.959 164.472 212.509 \
-	    164.022 212.509 163.46 212.509 163.01 212.959 162.56 \
-	    212.959 161.661 212.959 161.211 212.059 161.211 \
-	    211.609 160.649 211.609 160.199 209.698 160.649 \
-	    208.349 163.46 206.437 164.472 206.437 165.821 \
-	    207.899 165.821 208.349 166.833 210.148 166.833 \
-	    210.71 165.821 211.609 165.371 212.059 165.371 \
-	    212.959 165.821 213.97 165.821 214.42 -fill $pengcolor \
-	    -outline {} -width 1  -tags logo
-
-    $c create polygon 201.462 248.6 201.462 249.05 \
-	    201.012 249.05 200.563 249.05 200.001 248.6 199.551 \
-	    248.6 198.651 247.7 197.752 247.251 196.74 246.689 \
-	    196.29 245.789 194.379 244.89 194.379 244.44 194.379 \
-	    242.529 193.929 242.079 193.479 240.617 193.479 \
-	    240.167 193.929 239.718 193.479 239.268 193.03 \
-	    236.457 192.58 234.096 192.58 233.197 192.58 231.735 \
-	    192.58 223.302 192.58 221.391 192.13 220.941 191.568 \
-	    221.953 189.769 226.113 189.319 226.563 189.319 \
-	    227.013 188.757 228.025 188.307 228.474 188.757 \
-	    228.474 185.497 234.096 185.047 234.995 184.597 \
-	    236.457 184.147 236.457 184.147 236.907 184.147 \
-	    237.357 183.136 239.268 182.686 239.268 182.686 \
-	    239.718 182.236 240.167 181.786 241.067 181.337 \
-	    242.529 180.887 242.529 180.887 243.878 179.425 \
-	    245.789 178.975 246.689 178.076 246.689 178.076 \
-	    247.251 177.064 247.7 175.715 247.7 175.265 247.7 \
-	    174.703 247.7 174.253 247.251 174.253 246.689 \
-	    174.253 245.789 173.804 242.079 174.253 242.079 \
-	    173.804 241.629 173.804 241.067 173.804 238.818 \
-	    173.804 237.806 173.804 236.457 173.354 234.546 \
-	    173.354 233.197 173.804 232.634 173.804 232.185 \
-	    173.804 231.735 173.804 228.924 173.354 227.575 \
-	    173.804 227.575 173.804 225.664 173.804 225.214 \
-	    173.804 224.764 173.804 223.302 173.804 217.231 \
-	    174.253 216.332 174.703 215.769 178.526 214.87 \
-	    179.425 215.32 179.425 216.332 179.425 217.681 \
-	    179.425 218.58 178.975 219.142 178.526 220.492 \
-	    178.526 220.941 178.076 221.391 178.076 221.953 \
-	    178.076 225.664 177.514 226.563 177.514 228.025 \
-	    177.064 228.474 177.064 228.924 177.064 230.835 \
-	    177.514 236.457 177.064 237.806 177.514 237.806 \
-	    177.514 238.818 177.514 240.617 177.514 241.067 \
-	    178.076 241.629 178.526 241.629 179.425 241.067 \
-	    179.875 240.617 179.875 240.167 180.325 239.268 \
-	    181.337 238.256 182.236 236.457 183.698 234.546 \
-	    184.147 233.197 185.497 230.835 186.509 229.824 \
-	    187.408 227.575 187.408 227.013 187.408 226.563 \
-	    187.858 225.664 188.307 225.214 188.757 224.764 \
-	    188.757 224.202 189.319 222.403 190.219 220.941 \
-	    191.118 217.681 192.13 215.769 194.379 214.87 \
-	    194.941 214.87 196.74 214.42 196.74 215.769 196.29 \
-	    215.769 196.29 216.332 196.29 216.781 196.74 219.592 \
-	    196.74 220.492 196.29 221.391 196.74 224.764 196.29 \
-	    225.664 196.29 226.113 196.29 227.575 196.74 229.374 \
-	    197.19 235.445 198.202 239.268 198.202 239.718 \
-	    198.202 241.067 198.202 242.529 198.651 242.978 \
-	    199.101 243.878 199.101 244.44 199.551 244.89 \
-	    200.001 246.239 201.462 248.6 -fill $pengcolor -outline \
-	    {} -width 1  -tags logo
-
-    $c create polygon 71.714 185.412 71.714 110.869 \
-	    81.496 110.869 82.845 110.981 83.969 111.431 85.094 \
-	    112.106 86.105 113.118 86.893 114.467 87.567 116.041 \
-	    88.017 117.39 88.242 118.065 88.467 118.852 88.579 \
-	    119.639 88.804 120.538 88.916 121.438 89.029 122.337 \
-	    89.141 123.349 89.254 124.361 89.366 125.485 89.366 \
-	    126.61 89.478 127.734 89.478 128.971 89.478 130.208 \
-	    89.478 131.444 89.478 132.456 89.478 133.468 89.478 \
-	    134.48 89.366 135.492 89.254 136.391 89.254 137.291 \
-	    89.141 138.19 89.029 139.09 88.916 139.877 88.804 \
-	    140.664 88.691 141.451 88.579 142.238 88.354 143.362 \
-	    88.129 144.374 87.904 145.386 87.567 146.398 87.342 \
-	    147.297 87.005 148.197 86.668 148.984 86.218 149.771 \
-	    87.005 151.233 87.342 152.02 87.68 152.919 87.904 \
-	    153.931 88.129 154.943 88.129 155.505 88.354 156.854 \
-	    88.354 157.641 88.354 158.428 88.467 159.328 88.467 \
-	    160.34 88.467 161.352 88.467 162.476 88.579 163.6 \
-	    88.579 164.837 88.579 166.186 88.579 166.973 88.691 \
-	    167.873 88.804 168.885 88.916 169.897 89.029 171.021 \
-	    89.029 172.258 89.029 173.719 89.029 175.068 89.029 \
-	    176.305 89.029 177.542 89.141 178.554 89.141 179.566 \
-	    89.141 180.353 89.141 181.14 89.254 181.814 89.366 \
-	    182.714 89.478 183.051 89.478 185.412 83.857 185.412 \
-	    83.857 184.738 83.744 183.951 83.744 183.276 83.744 \
-	    182.489 83.744 180.803 83.857 179.791 83.857 178.891 \
-	    83.857 177.879 83.857 176.867 83.857 175.743 83.857 \
-	    174.619 83.857 173.27 83.857 172.033 83.744 170.908 \
-	    83.744 170.009 83.632 169.109 83.632 168.322 83.52 \
-	    166.973 83.407 166.524 83.407 166.186 83.407 165.062 \
-	    83.407 164.05 83.295 163.151 83.295 162.251 83.295 \
-	    161.464 83.182 160.789 82.957 159.553 81.945 158.203 \
-	    80.596 157.754 76.886 157.754 76.886 185.412 71.714 \
-	    185.412 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 92.289 148.309 92.289 147.185 \
-	    92.289 146.061 92.289 145.049 92.402 143.924 92.402 \
-	    142.8 92.402 141.788 92.402 140.664 92.514 139.652 \
-	    92.514 138.64 92.627 137.628 92.627 136.616 92.739 \
-	    135.717 92.739 134.705 92.851 133.805 92.964 132.793 \
-	    92.964 131.894 93.076 130.995 93.301 129.196 93.414 \
-	    128.409 93.526 127.509 93.639 126.722 93.751 125.935 \
-	    93.863 125.148 93.976 124.361 94.313 122.787 94.426 \
-	    122.112 94.65 121.325 94.763 120.651 95.1 119.301 \
-	    95.55 117.615 96.112 116.041 96.674 114.692 97.236 \
-	    113.455 97.799 112.443 98.361 111.544 99.035 110.757 \
-	    99.71 110.082 100.385 109.632 101.059 109.295 \
-	    101.846 109.07 102.633 108.958 104.207 109.295 \
-	    104.882 109.632 105.556 110.082 106.231 110.757 \
-	    106.906 111.544 107.468 112.443 108.03 113.455 \
-	    108.592 114.692 109.154 116.041 109.604 117.615 \
-	    110.054 119.301 110.279 119.976 110.616 121.325 \
-	    110.841 122.112 110.953 122.787 111.178 123.574 \
-	    111.403 125.148 111.628 125.935 111.74 126.722 \
-	    111.853 127.622 111.965 128.409 112.078 129.308 \
-	    112.19 130.208 112.302 130.995 112.415 132.006 \
-	    112.64 133.805 112.752 134.817 112.865 135.717 \
-	    112.977 136.729 112.977 137.741 113.089 138.752 \
-	    113.089 139.764 113.202 140.776 113.202 141.788 \
-	    113.314 142.912 113.314 143.924 113.314 145.049 \
-	    113.427 146.061 113.427 147.185 113.427 148.309 \
-	    113.427 149.546 113.314 150.783 113.314 151.907 \
-	    113.314 153.032 113.314 154.156 113.202 155.28 \
-	    113.202 156.405 113.089 157.529 113.089 158.541 \
-	    112.977 159.553 112.865 160.565 112.752 161.576 \
-	    112.64 162.588 112.527 163.6 112.415 164.5 112.302 \
-	    165.512 112.19 166.411 112.078 167.311 111.965 \
-	    168.21 111.853 169.109 111.628 169.897 111.515 \
-	    170.796 111.403 171.583 111.178 172.37 111.066 \
-	    173.157 110.616 174.731 110.504 175.518 110.279 \
-	    176.193 110.054 176.98 109.604 178.666 109.154 \
-	    180.128 108.592 181.59 108.03 182.826 107.468 \
-	    183.951 106.906 184.963 106.231 185.75 105.556 \
-	    186.424 104.882 186.986 104.207 187.436 103.42 \
-	    187.661 102.633 187.661 101.846 187.661 101.059 \
-	    187.436 100.385 186.986 99.71 186.424 99.035 185.75 \
-	    98.361 184.963 97.799 183.951 97.236 182.826 96.674 \
-	    181.59 96.112 180.128 95.55 178.666 95.1 176.98 \
-	    94.988 176.193 94.763 175.518 94.538 174.731 94.426 \
-	    173.944 94.088 172.37 93.976 171.583 93.863 170.796 \
-	    93.639 169.897 93.526 169.109 93.414 168.21 93.301 \
-	    167.311 93.189 166.411 93.076 165.512 92.964 164.5 \
-	    92.964 163.6 92.851 162.588 92.739 161.576 92.627 \
-	    160.565 92.627 159.553 92.514 158.541 92.514 157.529 \
-	    92.514 156.405 92.402 155.28 92.402 154.156 92.402 \
-	    153.032 92.289 151.907 92.289 150.783 92.289 149.546 \
-	    92.289 148.309 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 121.859 110.869 127.481 \
-	    110.869 134.902 185.412 129.28 185.412 127.931 \
-	    171.808 120.847 171.808 119.948 185.412 114.326 \
-	    185.412 121.859 110.869 -fill #000000 -outline {} \
-	    -width 1  -tags logo
-
-    $c create polygon 137.263 185.412 137.263 \
-	    110.869 147.157 110.869 148.394 110.981 149.518 \
-	    111.431 150.417 112.106 151.317 113.118 152.104 \
-	    114.467 152.778 116.041 153.228 117.39 153.341 \
-	    118.065 153.566 118.852 153.903 120.538 154.015 \
-	    121.438 154.128 122.337 154.24 123.349 154.353 \
-	    124.361 154.465 125.485 154.465 126.61 154.577 \
-	    127.734 154.577 128.971 154.577 130.208 154.577 \
-	    131.444 154.577 132.456 154.577 133.468 154.577 \
-	    134.48 154.577 135.492 154.577 136.391 154.577 \
-	    137.291 154.577 138.19 154.465 139.09 154.465 \
-	    139.877 154.353 140.664 154.24 141.451 154.128 \
-	    142.238 153.903 143.362 153.678 144.374 153.341 \
-	    145.386 153.003 146.398 152.554 147.297 152.216 \
-	    148.197 151.767 148.984 151.317 149.771 152.104 \
-	    151.233 152.441 152.02 152.778 152.919 153.003 \
-	    153.931 153.228 154.943 153.341 155.505 153.453 \
-	    156.854 153.566 157.641 153.678 158.428 153.79 \
-	    159.328 153.903 160.34 154.015 161.352 154.015 \
-	    162.476 154.128 163.6 154.128 164.837 154.128 \
-	    166.186 154.128 166.973 154.128 167.873 154.128 \
-	    168.885 154.128 169.897 154.128 171.021 154.128 \
-	    172.258 154.128 173.719 154.24 175.068 154.24 \
-	    176.305 154.353 177.542 154.353 178.554 154.465 \
-	    179.566 154.577 180.353 154.69 181.14 154.69 181.814 \
-	    154.915 182.714 155.027 183.051 155.027 185.412 \
-	    149.405 185.412 149.405 184.738 149.293 183.951 \
-	    149.293 183.276 149.181 182.489 149.181 180.803 \
-	    149.068 179.791 149.068 178.891 149.068 177.879 \
-	    149.068 176.867 148.956 175.743 148.956 174.619 \
-	    148.956 173.27 148.956 172.033 148.956 170.908 \
-	    148.956 170.009 148.956 169.109 148.956 168.322 \
-	    148.956 166.973 148.956 166.524 148.956 166.186 \
-	    148.956 165.062 148.843 164.05 148.731 163.151 \
-	    148.618 162.251 148.506 161.464 148.394 160.789 \
-	    148.056 159.553 147.269 158.203 146.145 157.754 \
-	    142.435 157.754 142.435 185.412 137.263 185.412 \
-	    -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 158.4 185.412 158.4 110.869 \
-	    164.022 110.869 164.022 185.412 158.4 185.412 -fill \
-	    #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 168.182 185.412 168.182 \
-	    110.869 173.804 110.869 177.514 135.267 177.739 \
-	    136.054 177.851 136.954 177.964 137.853 178.076 \
-	    138.752 178.301 139.539 178.413 140.439 178.526 \
-	    141.338 178.751 143.137 178.975 144.037 179.088 \
-	    144.824 179.2 145.723 179.313 146.623 179.425 147.41 \
-	    179.538 148.422 179.763 149.321 179.875 150.333 \
-	    180.1 151.233 180.212 152.132 180.437 153.032 180.55 \
-	    154.043 180.774 154.943 180.887 155.842 180.999 \
-	    156.742 181.224 157.754 181.337 158.653 181.337 \
-	    157.641 181.224 156.629 181.224 155.617 181.224 \
-	    154.606 181.224 153.594 181.112 152.582 181.112 \
-	    151.682 181.112 150.67 180.999 149.771 180.999 \
-	    148.759 180.999 147.86 180.887 146.96 180.887 \
-	    145.948 180.887 145.049 180.887 144.149 180.887 \
-	    143.25 180.887 142.125 180.887 141.114 180.887 \
-	    140.102 180.887 139.09 180.887 138.078 180.887 \
-	    137.178 180.887 136.166 180.887 135.267 180.887 \
-	    134.368 180.887 133.468 180.887 132.569 180.887 \
-	    131.669 180.887 130.882 180.887 130.095 180.887 \
-	    110.869 185.946 110.869 185.946 185.412 180.325 \
-	    185.412 176.165 160.565 176.052 159.778 175.94 \
-	    158.99 175.827 158.203 175.602 156.517 175.49 \
-	    155.617 175.378 154.718 175.265 153.931 175.153 \
-	    153.032 175.04 152.02 174.928 151.12 174.703 150.221 \
-	    174.591 149.321 174.478 148.422 174.366 147.41 \
-	    174.141 146.51 174.028 145.611 173.804 144.599 \
-	    173.691 143.587 173.579 142.575 173.354 141.676 \
-	    173.241 140.551 173.017 139.539 172.904 138.528 \
-	    172.904 139.539 172.904 140.551 173.017 141.563 \
-	    173.017 142.575 173.017 143.587 173.129 144.599 \
-	    173.129 145.498 173.129 146.51 173.241 147.41 \
-	    173.241 148.422 173.241 149.321 173.354 150.221 \
-	    173.354 151.233 173.354 152.132 173.354 153.144 \
-	    173.354 154.156 173.354 155.055 173.354 156.067 \
-	    173.354 156.967 173.354 157.866 173.354 158.766 \
-	    173.354 159.553 173.354 160.452 173.354 161.239 \
-	    173.354 162.026 173.354 162.926 173.354 185.412 \
-	    168.182 185.412 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 206.184 185.412 205.622 \
-	    175.968 205.397 177.092 205.172 178.217 204.948 \
-	    179.228 204.61 180.128 204.385 181.027 204.048 \
-	    181.814 203.823 182.489 203.486 183.164 203.149 \
-	    183.838 202.811 184.4 202.024 185.75 201.125 186.762 \
-	    200.113 187.436 199.101 187.661 198.089 187.549 \
-	    197.19 186.986 196.29 186.087 195.391 184.85 194.941 \
-	    184.176 194.491 183.389 194.042 182.489 193.592 \
-	    181.477 193.255 180.465 192.805 179.341 192.467 \
-	    178.217 192.13 176.98 191.905 176.193 191.68 175.406 \
-	    191.568 174.619 191.456 173.832 191.231 172.932 \
-	    191.118 172.145 191.006 171.246 190.781 169.559 \
-	    190.669 168.66 190.556 167.648 190.444 166.748 \
-	    190.331 165.736 190.219 164.725 190.106 163.825 \
-	    189.994 162.926 189.994 162.026 189.882 161.127 \
-	    189.769 160.227 189.769 159.215 189.657 158.316 \
-	    189.544 157.304 189.544 156.405 189.432 155.393 \
-	    189.432 154.381 189.319 153.369 189.319 152.357 \
-	    189.319 151.345 189.319 150.333 189.319 149.321 \
-	    189.319 148.197 189.319 146.96 189.319 145.948 \
-	    189.319 144.824 189.319 143.7 189.319 142.688 \
-	    189.432 141.563 189.432 140.551 189.544 139.539 \
-	    189.544 138.528 189.544 137.516 189.657 136.504 \
-	    189.769 135.492 189.769 134.592 189.882 133.581 \
-	    189.994 132.681 189.994 131.782 190.106 130.882 \
-	    190.219 129.983 190.331 129.083 190.556 127.397 \
-	    190.669 126.61 190.781 125.823 191.006 124.923 \
-	    191.118 124.136 191.231 123.462 191.568 121.887 \
-	    191.793 121.213 191.905 120.426 192.13 119.751 \
-	    192.58 117.952 193.142 116.378 193.704 114.917 \
-	    194.266 113.567 194.941 112.443 195.616 111.431 \
-	    196.29 110.532 196.965 109.857 197.752 109.295 \
-	    198.426 108.845 199.214 108.62 200.001 108.508 \
-	    201.799 108.958 202.699 109.407 203.374 110.194 \
-	    204.161 111.094 204.835 112.218 205.51 113.567 \
-	    206.184 115.141 206.634 116.491 206.859 117.165 \
-	    206.971 117.952 207.421 119.526 207.534 120.426 \
-	    207.758 121.325 207.871 122.225 207.983 123.124 \
-	    208.096 124.136 208.208 125.036 208.321 126.047 \
-	    208.433 127.172 208.545 128.184 208.658 129.308 \
-	    208.77 130.32 208.77 131.557 208.883 132.681 208.995 \
-	    133.805 204.273 133.805 204.161 132.681 203.936 \
-	    131.557 203.711 130.432 203.486 129.533 203.261 \
-	    128.633 202.924 127.734 202.699 126.947 202.362 \
-	    126.385 201.35 124.586 200.001 124.024 199.438 \
-	    124.136 198.989 124.361 198.426 124.923 197.977 \
-	    125.598 197.527 126.497 197.077 127.622 196.628 \
-	    128.971 196.29 130.545 196.178 131.219 195.953 \
-	    132.681 195.84 133.356 195.728 134.143 195.616 \
-	    134.93 195.503 135.829 195.278 137.516 195.278 \
-	    138.303 195.166 139.315 195.166 140.214 195.053 \
-	    141.114 195.053 142.125 194.941 143.137 194.941 \
-	    144.149 194.941 145.161 194.941 146.173 194.941 \
-	    147.297 194.941 148.309 194.941 149.546 194.941 \
-	    150.67 194.941 151.907 194.941 152.919 195.053 \
-	    154.043 195.053 155.168 195.166 156.18 195.166 \
-	    157.192 195.278 158.091 195.391 159.103 195.391 \
-	    160.002 195.503 160.902 195.616 161.801 195.728 \
-	    162.588 195.84 163.375 196.065 164.162 196.178 \
-	    164.949 196.29 165.736 196.628 167.198 197.077 \
-	    168.547 197.527 169.672 197.977 170.571 198.426 \
-	    171.246 198.989 171.808 199.438 172.145 200.001 \
-	    172.258 200.9 171.92 201.575 171.246 202.249 170.009 \
-	    202.811 168.547 203.149 167.76 203.374 166.973 \
-	    203.598 166.186 203.823 165.399 204.048 164.5 \
-	    204.273 163.488 204.385 162.476 204.498 161.464 \
-	    204.61 160.34 204.723 159.103 200.001 159.103 \
-	    200.001 145.049 209.445 145.049 209.445 185.412 \
-	    206.184 185.412 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 148.506 261.305 148.506 \
-	    263.554 143.784 263.554 143.784 261.305 143.671 \
-	    260.068 143.334 259.394 142.772 259.056 141.985 \
-	    258.944 141.085 259.056 140.523 259.394 140.074 \
-	    261.755 140.074 263.104 140.523 264.678 141.085 \
-	    265.465 141.985 266.364 146.145 270.637 147.607 \
-	    271.874 148.506 272.998 148.843 274.01 148.956 \
-	    275.359 148.956 277.158 148.843 278.507 148.506 \
-	    279.632 147.944 280.643 147.157 281.43 146.482 \
-	    281.88 145.695 282.218 144.796 282.442 143.784 \
-	    282.667 142.659 282.78 141.535 282.78 140.298 282.78 \
-	    139.286 282.78 138.387 282.667 137.6 282.442 136.925 \
-	    282.218 136.363 281.88 135.576 281.093 135.014 \
-	    280.194 134.564 278.957 134.452 277.608 134.452 \
-	    275.359 139.624 275.359 139.624 277.608 139.736 \
-	    279.069 140.074 279.969 141.535 280.419 142.659 \
-	    280.081 143.334 279.519 143.671 278.62 143.784 \
-	    277.158 143.784 275.809 143.671 275.022 143.334 \
-	    274.235 142.772 273.448 141.985 272.548 137.263 \
-	    267.376 136.251 266.364 135.351 265.465 135.014 \
-	    264.565 134.902 263.554 134.902 261.755 135.014 \
-	    260.518 135.464 259.506 136.026 258.719 136.813 \
-	    257.932 137.488 257.595 138.275 257.145 139.174 \
-	    256.92 140.186 256.695 141.31 256.583 142.435 \
-	    256.583 143.447 256.583 144.458 256.583 145.245 \
-	    256.695 145.92 256.92 147.157 257.482 147.719 \
-	    258.157 148.169 258.944 148.394 260.068 148.506 \
-	    261.305 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 165.821 270.187 165.821 \
-	    276.708 165.821 277.833 165.708 278.957 165.483 \
-	    279.856 165.259 280.643 164.921 281.318 164.472 \
-	    281.88 163.909 282.218 163.235 282.555 162.448 \
-	    282.667 161.548 282.78 160.536 282.78 159.3 282.78 \
-	    158.175 282.78 157.051 282.78 156.151 282.667 \
-	    155.364 282.555 154.69 282.218 154.128 281.88 \
-	    153.678 281.318 153.341 280.643 153.116 279.856 \
-	    152.891 278.845 152.778 277.833 152.778 276.708 \
-	    152.778 270.187 152.778 269.063 152.891 268.051 \
-	    153.116 267.264 153.341 266.589 154.128 265.465 \
-	    155.364 264.678 156.151 264.453 157.051 264.228 \
-	    158.063 264.116 159.3 264.116 160.424 264.116 \
-	    161.548 264.228 162.448 264.453 163.235 264.678 \
-	    163.909 265.015 164.472 265.465 164.921 265.915 \
-	    165.483 267.264 165.708 268.051 165.821 269.063 \
-	    165.821 270.187 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 177.514 256.583 177.514 \
-	    258.494 177.064 258.494 176.165 258.606 175.715 \
-	    258.944 175.378 259.281 175.265 259.843 175.265 \
-	    264.565 177.514 264.565 177.514 266.927 175.265 \
-	    266.927 175.265 282.78 170.543 282.78 170.543 \
-	    266.927 168.632 266.927 168.632 264.565 170.543 \
-	    264.565 170.543 261.305 170.655 259.843 170.993 \
-	    258.606 171.442 257.707 171.892 257.032 173.579 \
-	    256.358 174.703 256.133 176.165 256.133 176.727 \
-	    256.133 177.064 256.133 177.514 256.583 -fill \
-	    #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 185.946 259.843 185.946 \
-	    264.565 188.757 264.565 188.757 266.927 185.946 \
-	    266.927 185.946 278.62 186.171 279.407 186.509 \
-	    279.969 187.071 280.306 187.858 280.419 188.307 \
-	    280.419 188.757 280.419 188.757 282.78 188.645 \
-	    282.78 188.307 282.78 187.183 282.78 186.509 282.78 \
-	    185.159 282.78 183.923 282.555 182.911 282.33 \
-	    182.236 281.88 181.786 281.206 181.561 280.419 \
-	    181.337 279.407 181.337 278.17 181.337 266.927 \
-	    179.425 266.927 179.425 264.565 181.337 264.565 \
-	    181.337 261.305 185.946 259.843 -fill #000000 \
-	    -outline {} -width 1  -tags logo
-
-    $c create polygon 190.219 264.565 194.379 \
-	    264.565 196.29 279.519 196.74 279.519 199.101 \
-	    264.565 204.723 264.565 207.084 279.519 207.534 \
-	    279.519 209.895 264.565 213.605 264.565 209.895 \
-	    282.78 204.723 282.78 201.912 267.376 201.462 \
-	    267.376 199.101 282.78 193.479 282.78 190.219 \
-	    264.565 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 229.121 269.175 229.121 282.78 \
-	    224.848 282.78 224.848 280.981 224.061 281.768 \
-	    223.049 282.33 221.925 282.667 220.688 282.78 \
-	    219.564 282.78 218.44 282.555 217.54 282.33 216.866 \
-	    281.88 216.528 281.318 216.191 280.531 216.079 \
-	    279.632 215.966 278.62 215.966 275.359 216.079 \
-	    274.347 216.978 272.998 217.877 272.548 218.44 \
-	    272.211 219.114 271.986 219.789 271.761 220.688 \
-	    271.536 221.588 271.424 222.6 271.311 223.724 \
-	    271.199 224.848 271.087 224.848 269.175 224.736 \
-	    267.826 224.399 266.927 223.612 266.477 222.487 \
-	    266.364 221.7 266.477 221.138 266.927 220.688 \
-	    268.726 220.688 269.175 216.416 269.175 216.528 \
-	    267.938 216.753 266.702 217.203 265.69 217.877 \
-	    265.015 218.44 264.678 219.114 264.453 219.901 \
-	    264.228 220.801 264.116 221.925 264.116 223.049 \
-	    264.116 224.061 264.116 225.073 264.116 225.86 \
-	    264.228 226.535 264.453 227.659 265.015 228.334 \
-	    265.69 228.783 266.702 229.008 267.938 229.121 \
-	    269.175 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 243.175 264.565 243.175 \
-	    266.927 242.725 266.927 241.601 266.927 240.701 \
-	    267.151 239.914 267.489 239.352 267.826 239.015 \
-	    268.276 238.678 268.95 238.565 269.737 238.453 \
-	    270.637 238.453 282.78 233.731 282.78 233.731 \
-	    264.565 238.453 264.565 238.453 265.915 239.352 \
-	    265.128 240.364 264.565 242.163 264.116 242.725 \
-	    264.565 243.175 264.565 -fill #000000 -outline {} \
-	    -width 1  -tags logo
-
-    $c create polygon 258.129 270.187 258.129 \
-	    274.347 249.696 274.347 249.696 278.17 249.809 \
-	    279.294 250.146 279.969 250.708 280.643 251.607 \
-	    280.981 252.732 280.643 253.406 279.969 253.744 \
-	    279.294 253.969 278.17 253.969 276.708 258.129 \
-	    276.708 258.129 277.608 258.129 278.957 257.904 \
-	    280.081 257.454 281.093 256.779 281.88 256.217 \
-	    282.218 254.643 282.667 253.744 282.78 252.732 \
-	    282.78 251.607 282.78 250.371 282.78 249.359 282.78 \
-	    248.459 282.667 247.672 282.442 246.436 281.88 \
-	    245.986 281.318 245.649 280.643 245.424 279.856 \
-	    245.199 278.957 245.086 277.833 244.974 276.708 \
-	    244.974 270.187 245.086 269.063 245.199 268.051 \
-	    245.311 267.264 245.649 266.589 245.986 265.915 \
-	    246.436 265.465 246.998 265.015 247.672 264.678 \
-	    248.459 264.453 249.359 264.228 250.371 264.116 \
-	    251.607 264.116 252.732 264.116 253.744 264.228 \
-	    254.756 264.453 255.543 264.678 256.217 265.015 \
-	    256.779 265.465 257.229 265.915 257.566 266.589 \
-	    257.791 267.264 258.016 268.051 258.129 269.063 \
-	    258.129 270.187 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 272.183 256.583 277.355 \
-	    256.583 277.355 282.78 272.183 282.78 272.183 \
-	    256.583 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 295.569 268.726 295.569 282.78 \
-	    290.959 282.78 290.959 269.175 290.847 268.051 \
-	    290.509 267.376 289.947 266.702 289.048 266.364 \
-	    287.923 266.702 287.136 267.376 287.024 268.051 \
-	    287.136 269.175 287.136 282.78 282.527 282.78 \
-	    282.527 264.565 286.687 264.565 287.136 265.915 \
-	    288.036 265.128 289.048 264.565 290.172 264.228 \
-	    291.409 264.116 292.533 264.116 293.433 264.341 \
-	    294.107 264.565 294.669 265.015 295.344 266.477 \
-	    295.569 267.489 295.569 268.726 -fill #000000 \
-	    -outline {} -width 1  -tags logo
-
-    $c create polygon 312.434 269.737 312.434 \
-	    270.637 308.274 270.637 308.274 269.175 308.161 \
-	    267.826 307.824 266.927 307.262 266.477 306.363 \
-	    266.364 305.576 266.477 305.013 266.927 304.676 \
-	    267.826 304.564 269.175 304.564 278.17 304.676 \
-	    279.294 305.013 279.969 306.363 280.981 307.262 \
-	    280.643 307.824 279.969 307.937 279.294 307.824 \
-	    278.17 307.824 276.259 312.434 276.259 312.434 \
-	    277.608 312.434 278.957 312.209 280.081 311.759 \
-	    281.093 311.085 281.88 310.523 282.218 309.173 \
-	    282.667 308.386 282.78 307.374 282.78 306.363 282.78 \
-	    305.238 282.78 304.226 282.78 303.327 282.667 \
-	    302.427 282.442 301.753 282.218 301.191 281.88 \
-	    300.853 281.318 300.516 280.643 300.179 279.856 \
-	    299.954 278.957 299.841 277.833 299.841 276.708 \
-	    299.841 270.187 299.841 269.063 299.954 268.051 \
-	    300.179 267.264 300.404 266.589 301.191 265.465 \
-	    302.427 264.678 303.327 264.453 304.226 264.228 \
-	    305.238 264.116 306.363 264.116 307.374 264.116 \
-	    308.386 264.228 309.173 264.453 309.96 264.678 \
-	    310.523 265.015 311.085 265.465 311.759 266.252 \
-	    312.209 267.264 312.434 268.388 312.434 269.737 \
-	    -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 316.706 279.069 320.866 \
-	    279.069 320.866 282.78 316.706 282.78 316.706 \
-	    279.069 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 48.215 186.312 48.215 185.412 \
-	    47.766 184.4 47.766 183.501 47.316 183.501 47.316 \
-	    182.601 46.416 181.59 46.416 181.14 45.967 180.24 \
-	    45.405 179.791 44.955 179.228 44.055 178.329 43.606 \
-	    177.879 43.156 177.43 42.144 176.98 41.694 176.418 \
-	    41.245 175.968 38.883 175.068 36.972 174.169 36.522 \
-	    174.169 35.173 173.607 34.723 174.169 31.913 173.607 \
-	    31.913 174.169 29.551 173.607 29.551 174.169 28.54 \
-	    174.169 28.09 174.619 27.19 174.169 27.19 174.619 \
-	    26.741 174.619 25.729 175.068 23.93 175.518 22.918 \
-	    175.068 22.468 175.518 20.669 176.418 19.657 176.418 \
-	    15.048 178.779 14.036 179.228 12.686 180.24 12.237 \
-	    180.69 11.225 181.59 10.775 182.039 10.325 182.601 \
-	    10.775 182.601 10.325 184.4 10.775 184.85 11.225 \
-	    186.312 14.036 188.223 14.485 188.673 16.846 190.022 \
-	    17.296 190.472 17.296 191.034 15.947 191.933 15.048 \
-	    192.383 14.485 192.833 14.036 193.283 13.136 193.845 \
-	    12.237 194.295 12.686 195.644 12.686 196.094 12.237 \
-	    197.555 12.237 198.005 11.675 198.904 12.237 200.816 \
-	    12.237 202.277 12.237 204.526 11.675 205.988 12.237 \
-	    205.988 12.237 206.437 12.237 207.337 12.686 208.349 \
-	    12.686 209.248 13.136 209.698 12.686 211.16 13.136 \
-	    212.509 13.136 213.521 13.586 215.32 13.586 216.781 \
-	    13.586 217.681 14.036 220.492 14.485 222.403 15.048 \
-	    222.853 15.947 222.853 15.947 222.403 16.397 221.953 \
-	    16.846 216.781 17.296 215.32 17.858 211.609 18.308 \
-	    210.71 18.308 210.148 18.308 209.248 17.858 208.798 \
-	    17.858 207.899 18.308 206.437 18.308 205.538 18.308 \
-	    205.088 18.308 203.627 16.846 203.627 15.947 203.177 \
-	    15.947 202.727 15.947 202.277 16.397 201.715 16.846 \
-	    201.715 17.858 201.715 18.308 201.715 18.758 201.265 \
-	    18.308 200.816 17.858 199.916 18.308 198.455 17.858 \
-	    198.455 17.858 193.283 19.208 192.383 20.107 191.933 \
-	    21.569 191.484 22.018 191.484 22.918 192.383 22.918 \
-	    192.833 23.48 192.833 23.93 198.005 23.48 199.467 \
-	    23.93 202.277 25.279 202.277 29.551 202.727 30.001 \
-	    202.277 30.901 202.277 31.913 202.277 35.623 201.265 \
-	    36.522 201.265 36.972 200.816 37.984 200.816 38.883 \
-	    200.816 39.333 200.366 40.345 199.916 40.795 199.916 \
-	    42.594 198.455 44.055 198.005 44.055 197.555 44.505 \
-	    197.105 46.416 195.644 46.416 194.744 46.866 194.295 \
-	    47.316 193.845 47.766 193.283 47.316 192.833 48.215 \
-	    190.472 48.215 190.022 48.215 189.572 48.215 188.673 \
-	    48.215 187.211 48.215 186.762 48.215 186.312 -fill \
-	    $bg -outline {} -width 1  -tags logo
-
-    $c create polygon 76.886 142.688 81.046 142.688 \
-	    82.508 142.35 83.407 140.889 83.632 140.327 83.969 \
-	    138.865 84.082 137.965 84.194 137.066 84.307 136.054 \
-	    84.307 134.93 84.307 133.805 84.307 132.456 84.194 \
-	    131.332 84.082 130.208 83.857 129.308 83.632 128.409 \
-	    83.407 127.734 82.395 126.272 81.046 125.823 76.886 \
-	    125.823 76.886 142.688 -fill $bg -outline {} -width \
-	    1  -tags logo
-
-    $c create polygon 97.461 148.309 97.461 149.546 \
-	    97.461 150.783 97.461 152.02 97.574 153.144 97.574 \
-	    154.268 97.686 155.28 97.686 156.405 97.799 157.416 \
-	    97.799 158.316 97.911 159.328 98.023 160.227 98.136 \
-	    161.127 98.361 162.701 98.473 163.488 98.586 164.275 \
-	    98.698 164.949 98.81 165.736 99.373 167.535 99.822 \
-	    169.109 100.497 170.234 101.059 171.133 101.846 \
-	    171.583 102.633 171.808 104.095 171.133 104.769 \
-	    170.234 105.332 169.109 105.894 167.535 106.343 \
-	    165.736 106.456 164.949 106.681 164.275 106.793 \
-	    163.488 106.906 162.701 107.018 161.914 107.243 \
-	    160.227 107.355 159.328 107.355 158.316 107.468 \
-	    157.416 107.58 156.405 107.58 155.28 107.693 154.268 \
-	    107.693 153.144 107.693 152.02 107.693 150.783 \
-	    107.805 149.546 107.805 148.309 107.805 147.073 \
-	    107.693 145.836 107.693 144.711 107.693 143.587 \
-	    107.693 142.463 107.58 141.338 107.58 140.327 \
-	    107.468 139.315 107.355 138.303 107.355 137.403 \
-	    107.243 136.504 107.131 135.604 106.906 133.918 \
-	    106.793 133.131 106.681 132.456 106.456 131.669 \
-	    106.343 130.995 105.894 129.196 105.332 127.622 \
-	    104.769 126.497 104.095 125.598 103.42 125.148 \
-	    102.633 124.923 101.846 125.148 101.059 125.598 \
-	    100.497 126.497 99.822 127.622 99.373 129.196 98.81 \
-	    130.995 98.698 131.669 98.586 132.456 98.473 133.131 \
-	    98.361 133.918 98.248 134.817 98.023 136.504 97.911 \
-	    137.403 97.799 138.303 97.799 139.315 97.686 140.327 \
-	    97.686 141.338 97.574 142.463 97.574 143.587 97.461 \
-	    144.711 97.461 145.836 97.461 147.073 97.461 148.309 \
-	    -fill $bg -outline {} -width 1  -tags logo
-
-    $c create polygon 122.309 156.292 126.919 \
-	    156.292 124.67 130.545 122.309 156.292 -fill $bg \
-	    -outline {} -width 1  -tags logo
-
-    $c create polygon 142.435 142.688 146.145 \
-	    142.688 147.607 142.35 148.506 140.889 148.731 \
-	    140.327 149.068 138.865 149.181 137.965 149.293 \
-	    137.066 149.405 136.054 149.405 134.93 149.405 \
-	    133.805 149.405 132.456 149.405 131.332 149.405 \
-	    130.208 149.293 129.308 149.181 128.409 148.956 \
-	    127.734 148.056 126.272 146.595 125.823 142.435 \
-	    125.823 142.435 142.688 -fill $bg -outline {} -width \
-	    1  -tags logo
-
-    $c create polygon 111.515 228.924 111.515 \
-	    227.575 111.066 225.664 108.705 221.391 108.255 \
-	    220.042 108.255 219.142 108.255 218.58 108.255 \
-	    218.13 107.805 217.681 106.793 218.58 104.994 \
-	    220.941 104.432 221.953 102.633 224.202 102.183 \
-	    224.764 101.621 225.214 99.822 228.474 97.461 \
-	    233.197 97.461 234.096 97.461 234.995 97.911 235.445 \
-	    98.361 236.007 99.822 236.457 102.633 236.457 \
-	    104.432 235.445 105.894 234.995 106.343 234.546 \
-	    106.793 234.546 107.805 233.646 110.616 230.835 \
-	    111.515 229.824 111.515 229.374 111.515 228.924 \
-	    -fill $bg -outline {} -width 1  -tags logo
-
-    $c create polygon 161.211 269.175 160.986 \
-	    267.826 160.649 266.927 160.199 266.477 159.3 \
-	    266.364 158.4 266.477 157.838 266.927 157.613 \
-	    267.826 157.388 269.175 157.388 278.17 157.613 \
-	    279.294 157.838 279.969 159.3 280.981 160.199 \
-	    280.643 160.649 279.969 160.986 279.294 161.211 \
-	    278.17 161.211 269.175 -fill $bg -outline {} -width \
-	    1  -tags logo
-
-    $c create polygon 224.848 273.448 223.836 \
-	    273.448 222.825 273.56 222.15 273.673 221.588 \
-	    273.897 220.913 274.684 220.688 275.809 220.688 \
-	    278.17 220.801 279.294 221.138 279.969 221.7 280.643 \
-	    222.487 280.981 223.612 280.643 224.399 279.969 \
-	    224.736 279.294 224.848 278.17 224.848 273.448 -fill \
-	    $bg -outline {} -width 1  -tags logo
-
-    $c create polygon 253.969 269.175 253.744 \
-	    267.826 253.406 266.927 252.732 266.477 251.607 \
-	    266.364 250.708 266.477 250.146 266.927 249.696 \
-	    269.175 249.696 272.548 253.969 272.548 253.969 \
-	    269.175 -fill $bg -outline {} -width 1  -tags logo
-
-}
-
-#***********************************************************************
-# %PROCEDURE: LoadConnectionInfo
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Loads the connection information into the global ConnectionInfo variable
-#***********************************************************************
-proc LoadConnectionInfo {} {
-    global ConnectionInfoFile ConnectionInfo PasswordFile
-    set ConnectionInfo {}
-    if {![file exists $ConnectionInfoFile]} {
-	return
-    }
-    set problem [catch {
-	set fp [open $ConnectionInfoFile "r"]
-	while {1} {
-	    if {[gets $fp line] < 0} {
-		break
-	    }
-	    set line [string trim $line]
-	    if {[string match "#*" $line]} {
-		continue
-	    }
-	    if {"$line" == ""} {
-		continue
-	    }
-	    set ConnectionInfo $line
-	    break
-	}
-	close $fp
-    } err]
-    if {$problem} {
-	tk_dialog .err Error "Error loading configuration file: $err" error 0 OK
-    }
-    # Try loading and merging passwords if the password file is readable
-    if {![file readable $PasswordFile]} {
-	return
-    }
-
-    set fp [open $PasswordFile "r"]
-    while {1} {
-	if {[gets $fp line] < 0} {
-	    break
-	}
-	set line [string trim $line]
-	if {[string match "#*" $line]} {
-	    continue
-	}
-	if {"$line" == ""} {
-	    continue
-	}
-	set passwords $line
-	break
-    }
-    close $fp
-
-    # Merge passwords
-    foreach thing $passwords {
-	set name [value $thing ConnectionName]
-	set password [value $thing Password]
-	set conn [GetConnection $name]
-	if {"$conn" != ""} {
-	    lappend conn Password $password
-	    ReplaceConnection $conn
-	}
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: GetConnection
-# %ARGUMENTS:
-#  name -- name of connection
-# %RETURNS:
-#  key/value pair listing connection configuration, or "" if not found.
-#***********************************************************************
-proc GetConnection { name } {
-    global ConnectionInfo
-    foreach thing $ConnectionInfo {
-	if {[value $thing ConnectionName] == "$name"} {
-	    return $thing
-	}
-    }
-    return ""
-}
-    
-
-#***********************************************************************
-# %PROCEDURE: DeleteConnection
-# %ARGUMENTS:
-#  name -- name of connection
-# %RETURNS:
-#  Nothing, but deletes connection named "$name"
-#***********************************************************************
-proc DeleteConnection { name } {
-    global ConnectionInfo ConfigDir
-    set newInfo {}
-    set found 0
-    foreach thing $ConnectionInfo {
-	if {[value $thing ConnectionName] == "$name"} {
-	    set found 1
-	} else {
-	    lappend newInfo $thing
-	}
-    }
-    if {!$found} {
-	return
-    }
-    set ConnectionInfo $newInfo
-    SaveConnectionInfo
-
-    # Delete the config file
-    set fname [file join $ConfigDir conf.$name]
-    catch { file delete $fname }
-
-    BuildConnectionMenu
-    if {[GetCurrentConnection] == $name} {
-	if {[llength $ConnectionInfo] == 0} {
-	    SwitchConnection ""
-	} else {
-	    set name [value [lindex $ConnectionInfo 0] ConnectionName]
-	    SwitchConnection $name
-	}
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: ReplaceConnection
-# %ARGUMENTS:
-#  conn -- new name/value pairs
-# %RETURNS:
-#  Nothing, but replaces connection in ConnectionInfo.  If no such
-#  connection exists, appends new connection.
-#***********************************************************************
-proc ReplaceConnection { conn } {
-    global ConnectionInfo
-    set name [value $conn ConnectionName]
-    set newInfo {}
-    set found 0
-    foreach thing $ConnectionInfo {
-	if {[value $thing ConnectionName] == "$name"} {
-	    lappend newInfo $conn
-	    set found 1
-	} else {
-	    lappend newInfo $thing
-	}
-    }
-    if {!$found} {
-	lappend newInfo $conn
-    }
-    set ConnectionInfo $newInfo
-}
-
-proc DeletePPPoEConnection {} {
-    set conn [GetCurrentConnection]
-    if {"$conn" == ""} {
-	return
-    }
-    set ans [tk_dialog .confirm "Confirm Deletion - RP-PPPoE" "Are you sure you wish to delete the connection `$conn'?" warning 0 No Yes]
-    if {$ans} {
-	DeleteConnection $conn
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: CreateMainDialog
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Creates the main window
-#***********************************************************************
-proc CreateMainDialog {} {
-    global ConnectionInfoFile
-    global ConnectionInfo
-    global Admin
-    wm title . "RP-PPPoE"
-    wm iconname . "PPPoE"
-    frame .f1
-    label .l1 -text "Connection: "
-    menubutton .m1 -text "" -indicatoron 1 -menu .m1.menu -relief raised
-    menu .m1.menu -tearoff 0
-    pack .l1 .m1 -in .f1 -side left -expand 0 -fill x
-    canvas .c -width 40 -height 20
-    pack .c -in .f1 -side left -expand 0 -fill none
-
-    # Draw the LED's
-    .c create rectangle 10 1 30 8 -outline "#808080" -fill "#A0A0A0" -tags xmitrect
-    .c create rectangle 10 10 30 18 -outline "#808080" -fill "#A0A0A0" -tags recvrect
-
-    frame .buttons
-    button .start -text "Start" -command "StartPPPoEConnection"
-    button .stop -text "Stop" -command "StopPPPoEConnection"
-    button .exit -text "Exit" -command "exit"
-    canvas .graph -width 1 -height 1
-    if {[file writable $ConnectionInfoFile]} {
-	set Admin 1
-	pack .f1 -side top -expand 1 -fill both
-	pack .buttons -side top -expand 0 -fill x
-	button .delete -text "Delete" -command "DeletePPPoEConnection"
-	button .new -text "New Connection..." -command "NewPPPoEConnection"
-	button .props -text "Properties..." -command "EditConnectionProps"
-	pack .graph -in .f1 -side left -expand 1 -fill both
-	pack .start .stop .delete .props .new .exit -in .buttons -side left -expand 0 -fill none
-    } else {
-	set Admin 0
-	pack .f1 -side top -expand 0 -fill x
-	pack .buttons -side top -expand 1 -fill both
-	pack .start .stop .exit -in .buttons -side left -expand 0 -fill none
-	pack .graph -in .buttons -side left -expand 1 -fill both
-    }
-
-    LoadConnectionInfo
-    BuildConnectionMenu
-    # If no connections exist, pop up new connection dialog
-    if {[llength $ConnectionInfo] == 0} {
-	SwitchConnection ""
-	if {$Admin} {
-	    update idletasks
-	    NewPPPoEConnection
-	} else {
-	    tk_dialog .note Note "Note: There are no connections defined.  You must run this program as root to define connections" warning 0 OK
-	}
-    } else {
-	set con [lindex $ConnectionInfo 0]
-	set name [value $con ConnectionName]
-	SwitchConnection $name
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: GetCurrentConnection
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  The name of the current connection in the GUI.
-#***********************************************************************
-proc GetCurrentConnection {} {
-    .m1 cget -text
-}
-
-#***********************************************************************
-# %PROCEDURE: value
-# %ARGUMENTS:
-#  lst -- a list of key/value pairs
-#  key -- key we're looking for
-# %RETURNS:
-#  value corresponding to $key, or "" if not found.
-#***********************************************************************
-proc value { lst key } {
-    set idx [lsearch -exact $lst $key]
-    if {$idx >= 0} {
-	return [lindex $lst [expr $idx+1]]
-    }
-    return ""
-}
-
-#***********************************************************************
-# %PROCEDURE: SwitchConnection
-# %ARGUMENTS:
-#  name -- new connection name
-# %DESCRIPTION:
-#  Makes $name the active connection
-#***********************************************************************
-proc SwitchConnection { name } {
-    .m1 configure -text $name
-    SetButtonStates
-    UpdateConnectionState 0
-}
-
-#***********************************************************************
-# %PROCEDURE: EditConnectionProps
-# %ARGUMENTS:
-#  None
-# %DESCRIPTION:
-#  Pops up edit window for current connection
-#***********************************************************************
-proc EditConnectionProps {} {
-    global ConnectionInfo
-    set conn [GetCurrentConnection]
-    NewPPPoEConnection $conn
-}
-
-#***********************************************************************
-# %PROCEDURE: FillConnectionGui
-# %ARGUMENTS:
-#  w -- connection property GUI
-#  name -- name of connection
-# %DESCRIPTION:
-#  Fills GUI with values corresponding to $name.
-#***********************************************************************
-proc FillConnectionGui { w name } {
-    global ConnectionInfo
-    set found [GetConnection $name]
-    if {"$found" != ""} {
-	ListToSetupGui $w $found
-    }
-}
-    
-#***********************************************************************
-# %PROCEDURE: BuildConnectionMenu
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Builds the connection menu
-#***********************************************************************
-proc BuildConnectionMenu {} {
-    global ConnectionInfo
-    .m1.menu delete 0 end
-    foreach connection $ConnectionInfo {
-	set name [value $connection ConnectionName]
-	.m1.menu add command -label $name -command [list SwitchConnection $name]
-    }
-    .m1.menu add separator
-    .m1.menu add command -label "User's Manual" -command Help
-}
-
-#***********************************************************************
-# %PROCEDURE: SetButtonStates
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Enables or disables buttons, as appropriate
-#***********************************************************************
-proc SetButtonStates {} {
-    global Admin
-    set conn [GetCurrentConnection]
-    if {"$conn" == ""} {
-	.start configure -state disabled
-	.stop configure -state disabled
-	catch {
-	    .delete configure -state disabled
-	    .props configure -state disabled
-	    .new configure -state normal
-	}
-    } else {
-	foreach {startstop updown interface} [GetConnectionStatus $conn] {break}
-	if {"$startstop" == "started"} {
-	    .start configure -state disabled
-	    .stop configure -state normal
-	} else {
-	    .start configure -state normal
-	    .stop configure -state disabled
-	}
-	catch {
-	    .delete configure -state normal
-	    .props configure -state normal
-	    .new configure -state normal
-	}
-	if {!$Admin} {
-	    set ok [value [GetConnection $conn] NonrootOK]
-	    if {!$ok} {
-		.start configure -state disabled
-		.stop configure -state disabled
-	    }
-	}
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: GetEthernetInterfaces
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  A list of Ethernet interfaces
-#***********************************************************************
-proc GetEthernetInterfaces {} {
-    set ifs {}
-    set fp [open "|/sbin/ifconfig" "r"]
-    while {[gets $fp line] >= 0} {
-	if {[regexp {^eth[0-9]+} $line eth]} {
-	    lappend ifs $eth
-	}
-    }
-    return $ifs
-}
-
-#***********************************************************************
-# %PROCEDURE: StartPPPoEConnection
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Starts currently-selected PPPoE connection.
-#***********************************************************************
-proc StartPPPoEConnection {} {
-    global Wrapper
-    global StartState
-    global UpdateToken
-
-    set conn [GetCurrentConnection]
-    if {"$conn" == ""} {
-	return
-    }
-
-    if {"$UpdateToken" != ""} {
-	after cancel $UpdateToken
-	set UpdateToken ""
-    }
-
-    catch { unset StartState }
-    set StartState(chars) ""
-    set StartState(status) ""
-    set StartState(msg) ""
-    set StartState(flip) 0
-
-    set fp [open "|$Wrapper start $conn" "r"]
-
-    # Set fileevent
-    fileevent $fp readable [list StartFPReadable $fp]
-
-    LockGui $fp
-    vwait StartState(status)
-    UnlockGui
-
-    if {$StartState(status) == "failed"} {
-	tk_dialog .err Error "Error starting connection: $StartState(msg)" error 0 OK
-    }
-    SetButtonStates
-    UpdateConnectionState 0
-}
-
-proc LockGui { fp } {
-    .start configure -state disabled
-    .stop configure -state normal -command [list AbortConnection $fp]
-    .exit configure -state disabled
-    .m1 configure -state disabled
-    grab set .stop
-}
-
-proc UnlockGui {} {
-    .start configure -state normal
-    .stop configure -state disabled -command StopPPPoEConnection
-    .exit configure -state normal
-    .m1 configure -state normal
-    grab release .stop
-}
-
-proc AbortConnection { fp } {
-    global StartState
-    catch { StopPPPoEConnection }
-    catch { close $fp }
-    set StartState(msg) "Connection aborted by user"
-    set StartState(status) "failed"
-}
-    
-#***********************************************************************
-# %PROCEDURE: StartFPReadable
-# %ARGUMENTS:
-#  fp -- file handle
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Called when the "adsl-start" file handle is readable.
-#***********************************************************************
-proc StartFPReadable { fp } {
-    global StartState
-    set char [read $fp 1]
-    if {$char == ""} {
-	set uhoh [catch {close $fp} err]
-	if {$uhoh} {
-	    set StartState(status) "failed"
-	    set StartState(msg) $err
-	} else {
-	    set StartState(status) "succeeded"
-	}
-	return
-    }
-    append StartState(chars) $char
-    if {$StartState(flip)} {
-	ConnectionStateDown
-    } else {
-	ConnectionStateOff
-    }
-    set StartState(flip) [expr 1 - $StartState(flip)]
-}
-
-#***********************************************************************
-# %PROCEDURE: StopPPPoEConnection
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Stops currently-selected PPPoE connection.
-#***********************************************************************
-proc StopPPPoEConnection {} {
-    global Wrapper
-    set conn [GetCurrentConnection]
-    if {"$conn" == ""} {
-	return
-    }
-    set fp [open "|$Wrapper stop $conn" "r"]
-    while {1} {
-	set char [read $fp 1]
-	if {"$char" == ""} {
-	    break;
-	}
-    }
-    set uhoh [catch {close $fp} err]
-    if {$uhoh} {
-	# Ignore a common error
-	if {![string match "*appears to have died*" $err]} {
-	    tk_dialog .err Error "Error stopping connection: $err" error 0 OK
-	}
-    }
-    SetButtonStates
-    UpdateConnectionState 0
-}
-
-#***********************************************************************
-# %PROCEDURE: NewPPPoEConnection
-# %ARGUMENTS:
-#  name -- if supplied, we're editing the existing connection "name"
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Creates a new PPPoE connection
-#***********************************************************************
-proc NewPPPoEConnection {{name ""}} {
-    set w .newcon
-    if {[winfo exists $w]} {
-	wm deiconify $w
-	raise $w
-	return
-    }
-
-    toplevel $w
-    if {"$name" == ""} {
-	wm title $w "New Connection - RP-PPPoE"
-	wm iconname $w "New Connection"
-    } else {
-	wm title $w "Edit Connection - RP-PPPoE"
-	wm iconname $w "Edit Connection"
-    }
-    wm withdraw $w
-
-    tabnotebook_create $w.tn
-    set basic [tabnotebook_page $w.tn "Basic"]
-    set interface [tabnotebook_page $w.tn "NIC and DNS"]
-    set opts [tabnotebook_page $w.tn "Options"]
-    set advanced [tabnotebook_page $w.tn "Advanced"]
-
-    # ----------- BASIC PAGE -------------
-    label $w.lconName -text "Connection Name: " -anchor e
-    if {"$name" != ""} {
-	label $w.conName -text $name -anchor w
-    } else {
-	entry $w.conName -width 15
-	RegisterHelpWindow $w.lconName "Enter a name for this connection.  It can contain letters, numbers, undescores and the minus-sign." $w.help
-	RegisterHelpWindow $w.conName "Enter a name for this connection.  It can contain letters, numbers, undescores and the minus-sign." $w.help
-    }
-
-    label $w.luser -text "User Name: " -anchor e
-    entry $w.user -width 15
-    RegisterHelpWindow $w.luser "Enter your user name.  Do not add a domain-name after the user name." $w.help
-    RegisterHelpWindow $w.user "Enter your user name.  Do not add a domain-name after the user name." $w.help
-
-    label $w.lnet -text "Network: " -anchor e
-    entry $w.network -width 15
-    RegisterHelpWindow $w.lnet "Some ISP's require you to enter their domain-name here (e.g. \"sympatico.ca\")." $w.help
-    RegisterHelpWindow $w.network "Some ISP's require you to enter their domain-name here (e.g. \"sympatico.ca\")." $w.help
-
-    label $w.lpass -text "Password: " -anchor e
-    entry $w.pass -width 15 -show "*"
-    RegisterHelpWindow $w.lpass "Enter your password." $w.help
-    RegisterHelpWindow $w.pass "Enter your password." $w.help
-
-    grid $w.lconName $w.conName -in $basic -sticky nsew
-    grid $w.luser $w.user -in $basic -sticky nsew
-    grid $w.lnet $w.network -in $basic -sticky nsew
-    grid $w.lpass $w.pass -in $basic -sticky nsew
-    grid columnconfigure $basic 1 -weight 1
-
-    # ----------- INTERFACES PAGE -------------
-    set ifs {}
-    catch {set ifs [GetEthernetInterfaces]}
-
-    label $w.lifname -text "Ethernet Interface: " -anchor e
-    entry $w.ifname -width 8
-    RegisterHelpWindow $w.lifname "Enter Ethernet interface to which DSL modem is attached." $w.help
-    RegisterHelpWindow $w.ifname "Enter Ethernet interface to which DSL modem is attached." $w.help
-
-    if {[llength $ifs] > 0} {
-	menubutton $w.ifmb -relief raised -text "..." -menu $w.ifmb.menu
-	RegisterHelpWindow $w.ifmb "Browse detected Ethernet interface names." $w.help
-	menu $w.ifmb.menu -tearoff 0
-	foreach if $ifs {
-	    $w.ifmb.menu add command -label $if -command "$w.ifname delete 0 end; $w.ifname insert end [list $if]"
-	}
-	grid $w.lifname $w.ifname $w.ifmb -in $interface -sticky nsew
-    } else {
-	grid $w.lifname $w.ifname - -in $interface -sticky nsew
-    }
-
-    label $w.ldns -text "DNS Setup: " -anchor e
-    menubutton $w.dns -text "From Server" -menu $w.dns.menu -relief raised -indicatoron 1
-    menu $w.dns.menu -tearoff 0
-    foreach thing {"From Server" "Specify" "Do not Adjust"} {
-	$w.dns.menu add command -label $thing -command [list SetDNSOption $w $thing]
-    }
-    RegisterHelpWindow $w.ldns "DNS server options:\n'From Server'   - Let PPPoE server specify DNS servers\n'Specify'       - Enter IP addresses of DNS servers yourself\n'Do not Adjust' - Leave your DNS setup alone." $w.help
-    RegisterHelpWindow $w.dns "DNS server options:\n'From Server'   - Let PPPoE server specify DNS servers\n'Specify'       - Enter IP addresses of DNS servers yourself\n'Do not Adjust' - Leave your DNS setup alone." $w.help
-
-    label $w.ldns1 -text "Primary DNS: " -anchor e
-    entry $w.dns1 -width 16
-    RegisterHelpWindow $w.ldns1 "Enter the IP address of the primary DNS server." $w.help
-    RegisterHelpWindow $w.dns1 "Enter the IP address of the primary DNS server." $w.help
-    label $w.ldns2 -text "Secondary DNS: " -anchor e
-    entry $w.dns2 -width 16
-    RegisterHelpWindow $w.ldns2 "Enter the IP address of the secondary DNS server." $w.help
-    RegisterHelpWindow $w.dns2 "Enter the IP address of the secondary DNS server." $w.help
-
-    SetDNSOption $w "From Server"
-    grid $w.ldns $w.dns - -in $interface -sticky nsew
-    grid $w.ldns1 $w.dns1 - -in $interface -sticky nsew
-    grid $w.ldns2 $w.dns2 - -in $interface -sticky nsew
-
-    # If only one Ethernet interface, select it by default
-    if {[llength $ifs] == 1} {
-	$w.ifname insert end [lindex $ifs 0]
-    }
-
-    grid columnconfigure $interface 1 -weight 1
-    # ----------- OPTS PAGE -------------
-    checkbutton $w.nonroot -text "Allow use by non-root users" -variable OPTS(nonroot) -anchor w
-    RegisterHelpWindow $w.nonroot "If enabled, ordinary users can start and stop this connection." $w.help
-    checkbutton $w.sync -text "Use synchronous PPP" -variable OPTS(sync) -anchor w
-    RegisterHelpWindow $w.sync "Use synchronous PPP (recommended -- easier on the CPU.)" $w.help
-    label $w.lfw -text "Firewalling: " -anchor e
-    if {[llength $ifs] == 1} {
-	set defaultFW "Stand-Alone"
-    } else {
-	set defaultFW "Masquerading"
-    }
-    menubutton $w.fw -text $defaultFW -menu $w.fw.menu -indicatoron 1 -relief raised
-    menu $w.fw.menu -tearoff 0
-    foreach type {Stand-Alone Masquerading None} {
-	$w.fw.menu add command -label $type -command [list $w.fw configure -text $type]
-    }
-    
-    RegisterHelpWindow $w.lfw "Firewalling options:\nStand-Alone  - A stand-alone machine.\nMasquerading - A gateway machine used for Internet sharing.\nNone         - Use if you already have your own firewall rules or want to run servers." $w.help
-    RegisterHelpWindow $w.fw "Firewalling options:\nStand-Alone  - A stand-alone machine.\nMasquerading - A gateway machine used for Internet sharing.\nNone         - Use if you already have your own firewall rules or want to run servers." $w.help
-    grid $w.nonroot - -in $opts -sticky nsew
-    grid $w.sync - -in $opts -sticky nsew
-    grid $w.lfw $w.fw -in $opts -sticky nsw
-    grid columnconfigure $opts 1 -weight 1
-
-    # ----------- ADVANCED PAGE -------------
-    label $w.lsn -text "Service-Name: " -anchor e
-    entry $w.servicename -width 24
-
-    label $w.lac -text "AC-Name: " -anchor e
-    entry $w.acname -width 24
-
-    RegisterHelpWindow $w.lac "Enter access concentrator name if required.  Most ISPs do not require this; try leaving it blank." $w.help
-    RegisterHelpWindow $w.acname "Enter access concentrator name if required.  Most ISPs do not require this; try leaving it blank." $w.help
-    grid $w.lsn $w.servicename -in $advanced -sticky nsew
-    grid $w.lac $w.acname -in $advanced -sticky nsew
-    RegisterHelpWindow $w.lsn "Enter service name if required.  Most ISPs do not require this; try leaving it blank." $w.help
-    RegisterHelpWindow $w.servicename "Enter service name if required.  Most ISPs do not require this; try leaving it blank." $w.help
-
-    grid columnconfigure $advanced 1 -weight 1
-
-    # ----------- BUTTONS -------------
-    frame $w.buttons
-    button $w.ok -text "OK" -command [list NewPPPoEConnectionOK $name $w]
-    button $w.cancel -text "Cancel" -command [list destroy $w]
-    pack $w.ok $w.cancel -in $w.buttons -expand 0 -fill none -side left
-
-    pack $w.tn -side top -expand 1 -fill both
-
-    text $w.help -width 60 -wrap word -state disabled -height 6
-    pack $w.help -side top -expand 0 -fill both
-    pack $w.buttons -side top -expand 0 -fill x
-
-    # If we're editing existing connection, fill GUI with current values
-    if {"$name" != ""} {
-	FillConnectionGui $w $name
-    }
-    wm deiconify $w
-    update idletasks
-    raise $w
-}
-
-#***********************************************************************
-# %PROCEDURE: SetDNSOption
-# %ARGUMENTS:
-#  w -- connection-editing window
-#  opt -- value of DNS option
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Adjusts GUI for specified option
-#***********************************************************************
-proc SetDNSOption { w opt } {
-    $w.dns configure -text $opt
-    if {"$opt" == "Specify"} {
-	$w.dns1 configure -state normal -background white
-	$w.dns2 configure -state normal -background white
-    } else {
-	$w.dns1 configure -state disabled -background "#d9d9d9"
-	$w.dns2 configure -state disabled -background "#d9d9d9"
-    }
-}
-
-# ----------------------------------------------------------------------
-# Tabbed notebook code from "Effective Tcl/Tk Programming"
-# ----------------------------------------------------------------------
-#  EXAMPLE: tabnotebook that can dial up pages
-# ----------------------------------------------------------------------
-#  Effective Tcl/Tk Programming
-#    Mark Harrison, DSC Communications Corp.
-#    Michael McLennan, Bell Labs Innovations for Lucent Technologies
-#    Addison-Wesley Professional Computing Series
-# ======================================================================
-#  Copyright (c) 1996-1997  Lucent Technologies Inc. and Mark Harrison
-# ======================================================================
-
-option add *Tabnotebook.tabs.background #666666 widgetDefault
-option add *Tabnotebook.margin 6 widgetDefault
-option add *Tabnotebook.tabColor #a6a6a6 widgetDefault
-option add *Tabnotebook.activeTabColor #d9d9d9 widgetDefault
-option add *Tabnotebook.tabFont \
-    -*-helvetica-bold-r-normal--*-120-* widgetDefault
-
-proc tabnotebook_create {win} {
-    global tnInfo
-
-    frame $win -class Tabnotebook
-    canvas $win.tabs -highlightthickness 0
-    pack $win.tabs -fill x
-
-    notebook_create $win.notebook
-    pack $win.notebook -expand yes -fill both
-
-    set tnInfo($win-tabs) ""
-    set tnInfo($win-current) ""
-    set tnInfo($win-pending) ""
-    return $win
-}
-
-proc tabnotebook_page {win name} {
-    global tnInfo
-
-    set page [notebook_page $win.notebook $name]
-    lappend tnInfo($win-tabs) $name
-
-    if {$tnInfo($win-pending) == ""} {
-        set id [after idle [list tabnotebook_refresh $win]]
-        set tnInfo($win-pending) $id
-    }
-    return $page
-}
-
-proc tabnotebook_refresh {win} {
-    global tnInfo
-
-    $win.tabs delete all
-
-    set margin [option get $win margin Margin]
-    set color [option get $win tabColor Color]
-    set font [option get $win tabFont Font]
-    set x 2
-    set maxh 0
-
-    foreach name $tnInfo($win-tabs) {
-        set id [$win.tabs create text \
-            [expr $x+$margin+2] [expr -0.5*$margin] \
-            -anchor sw -text $name -font $font \
-            -tags [list $name]]
-
-        set bbox [$win.tabs bbox $id]
-        set wd [expr [lindex $bbox 2]-[lindex $bbox 0]]
-        set ht [expr [lindex $bbox 3]-[lindex $bbox 1]]
-        if {$ht > $maxh} {
-            set maxh $ht
-        }
-
-        $win.tabs create polygon 0 0  $x 0 \
-            [expr $x+$margin] [expr -$ht-$margin] \
-            [expr $x+$margin+$wd] [expr -$ht-$margin] \
-            [expr $x+$wd+2*$margin] 0 \
-            2000 0  2000 10  0 10 \
-            -outline black -fill $color \
-            -tags [list $name tab tab-$name]
-
-        $win.tabs raise $id
-
-        $win.tabs bind $name <ButtonPress-1> \
-            [list tabnotebook_display $win $name]
-
-        set x [expr $x+$wd+2*$margin]
-    }
-    set height [expr $maxh+2*$margin]
-    $win.tabs move all 0 $height
-
-    $win.tabs configure -width $x -height [expr $height+4]
-
-    if {$tnInfo($win-current) != ""} {
-        tabnotebook_display $win $tnInfo($win-current)
-    } else {
-        tabnotebook_display $win [lindex $tnInfo($win-tabs) 0]
-    }
-    set tnInfo($win-pending) ""
-}
-
-proc tabnotebook_display {win name} {
-    global tnInfo
-
-    notebook_display $win.notebook $name
-
-    set normal [option get $win tabColor Color]
-    $win.tabs itemconfigure tab -fill $normal
-
-    set active [option get $win activeTabColor Color]
-    $win.tabs itemconfigure tab-$name -fill $active
-    $win.tabs raise $name
-
-    set tnInfo($win-current) $name
-}
-
-# ----------------------------------------------------------------------
-#  EXAMPLE: simple notebook that can dial up pages
-# ----------------------------------------------------------------------
-#  Effective Tcl/Tk Programming
-#    Mark Harrison, DSC Communications Corp.
-#    Michael McLennan, Bell Labs Innovations for Lucent Technologies
-#    Addison-Wesley Professional Computing Series
-# ======================================================================
-#  Copyright (c) 1996-1997  Lucent Technologies Inc. and Mark Harrison
-# ======================================================================
-
-option add *Notebook.borderWidth 2 widgetDefault
-option add *Notebook.relief sunken widgetDefault
-
-proc notebook_create {win} {
-    global nbInfo
-
-    frame $win -class Notebook
-    pack propagate $win 0
-
-    set nbInfo($win-count) 0
-    set nbInfo($win-pages) ""
-    set nbInfo($win-current) ""
-    return $win
-}
-
-proc notebook_page {win name} {
-    global nbInfo
-
-    set page "$win.page[incr nbInfo($win-count)]"
-    lappend nbInfo($win-pages) $page
-    set nbInfo($win-page-$name) $page
-
-    frame $page
-
-    if {$nbInfo($win-count) == 1} {
-        after idle [list notebook_display $win $name]
-    }
-    return $page
-}
-
-proc notebook_display {win name} {
-    global nbInfo
-
-    set page ""
-    if {[info exists nbInfo($win-page-$name)]} {
-        set page $nbInfo($win-page-$name)
-    } elseif {[winfo exists $win.page$name]} {
-        set page $win.page$name
-    }
-    if {$page == ""} {
-        error "bad notebook page \"$name\""
-    }
-
-    notebook_fix_size $win
-
-    if {$nbInfo($win-current) != ""} {
-        pack forget $nbInfo($win-current)
-    }
-    pack $page -expand yes -fill both
-    set nbInfo($win-current) $page
-}
-
-proc notebook_fix_size {win} {
-    global nbInfo
-
-    update idletasks
-
-    set maxw 0
-    set maxh 0
-    foreach page $nbInfo($win-pages) {
-        set w [winfo reqwidth $page]
-        if {$w > $maxw} {
-            set maxw $w
-        }
-        set h [winfo reqheight $page]
-        if {$h > $maxh} {
-            set maxh $h
-        }
-    }
-    set bd [$win cget -borderwidth]
-    set maxw [expr $maxw+2*$bd]
-    set maxh [expr $maxh+2*$bd]
-    $win configure -width $maxw -height $maxh
-}
-
-#***********************************************************************
-# %PROCEDURE: SetupGuiToList
-# %ARGUMENTS:
-#  w -- the PPPoE connection setup window
-# %RETURNS:
-#  A list of (name value) pairs for the connection.
-# %DESCRIPTION:
-#  Reads values from the GUI; makes a list.
-#***********************************************************************
-proc SetupGuiToList { w } {
-    global OPTS
-    set ans {}
-    if {[catch {lappend ans ConnectionName [$w.conName get]}]} {
-	lappend ans ConnectionName [$w.conName cget -text]
-    }
-    lappend ans UserName       [$w.user get]
-    lappend ans NetworkName    [$w.network get]
-    lappend ans Password       [$w.pass get]
-    lappend ans Interface      [$w.ifname get]
-    lappend ans DNSType        [$w.dns cget -text]
-    lappend ans DNS1           [$w.dns1 get]
-    lappend ans DNS2           [$w.dns2 get]
-    lappend ans NonrootOK      $OPTS(nonroot)
-    lappend ans Sync           $OPTS(sync)
-    lappend ans FirewallType   [$w.fw cget -text]
-    lappend ans ServiceName    [$w.servicename get]
-    lappend ans ACName         [$w.acname get]
-
-    # Validate
-    set name [value $ans ConnectionName]
-    if {![regexp -nocase {^[-a-z0-9_]+$} $name]} {
-	error "Connection name must be non-blank and contain only letters, digits, `_' and `-'"
-    }
-
-    # Check DNS
-    set type [value $ans DNSType]
-    if {"$type" == "Specify"} {
-	set dns [value $ans DNS1]
-	if {![regexp {[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+} "$dns"]} {
-	    error "Primary DNS entry must consist of four dot-separated decimal numbers"
-	}
-	set dns [value $ans DNS2]
-	if {"$dns" != "" && ![regexp {[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+} "$dns"]} {
-	    error "Secondary DNS entry must consist of four dot-separated decimal numbers"
-	}
-    }
-    return $ans
-}
-
-#***********************************************************************
-# %PROCEDURE: ListToSetupGui
-# %ARGUMENTS:
-#  w -- the PPPoE connection setup window
-#  lst -- a list of name/value pairs
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Updates GUI to reflect lst
-#***********************************************************************
-proc ListToSetupGui { w lst } {
-    global OPTS
-    foreach {key value} $lst {
-	switch -exact -- $key {
-	    ConnectionName {
-		catch {
-		    $w.conName delete 0 end
-		    $w.conName insert end $value
-		}
-		catch {
-		    $w.conName configure -text $value
-		}
-	    }
-	    UserName {
-		$w.user delete 0 end
-		$w.user insert end $value
-	    }
-	    NetworkName {
-		$w.network delete 0 end
-		$w.network insert end $value
-	    }
-	    Password {
-		$w.pass delete 0 end
-		$w.pass insert end $value
-	    }
-	    Interface {
-		$w.ifname delete 0 end
-		$w.ifname insert end $value
-	    }
-	    DNSType {
-		SetDNSOption $w $value
-	    }
-	    DNS1 {
-		set oldstate [$w.dns1 cget -state]
-		$w.dns1 configure -state normal
-		$w.dns1 delete 0 end
-		$w.dns1 insert end $value
-		$w.dns1 configure -state $oldstate
-	    }
-	    DNS2 {
-		set oldstate [$w.dns2 cget -state]
-		$w.dns2 configure -state normal
-		$w.dns2 delete 0 end
-		$w.dns2 insert end $value
-		$w.dns2 configure -state $oldstate
-	    }
-	    NonrootOK {
-		set OPTS(nonroot) $value
-	    }
-	    Sync {
-		set OPTS(sync) $value
-	    }
-	    FirewallType {
-		$w.fw configure -text $value
-	    }
-	    ServiceName {
-		$w.servicename delete 0 end
-		$w.servicename insert end $value
-	    }
-	    ACName {
-		$w.acname delete 0 end
-		$w.acname insert end $value
-	    }
-	}
-    }
-}
-
-proc NewPPPoEConnectionOK { name w } {
-    if {[catch {set conn [SetupGuiToList $w]} err]} {
-	tk_dialog .err "Invalid Parameters" "$err" error 0 OK
-	return
-    }
-    if {"$name" == ""} {
-	set name [value $conn ConnectionName]
-	set tmp [GetConnection $name]
-	if {"$tmp" != ""} {
-	tk_dialog .err "Connection Exists" "The connection `$name' already exists.  Pick another name." error 0 OK
-	return
-	}
-    }
-    ReplaceConnection $conn
-    SaveConnectionInfo
-    BuildConnectionMenu
-    SwitchConnection $name
-    destroy $w
-}
-
-proc SaveConnectionInfo {} {
-    global ConnectionInfo ConnectionInfoFile PasswordFile
-    set fp [open "$ConnectionInfoFile.new" "w"]
-    puts $fp "# RP-PPPoE GUI Configuration Information."
-    puts $fp "# This file may *look* human-editable, but it is NOT."
-    puts $fp "# So, you with the text editor:  Keep away from this file."
-    puts $fp "#"
-    set expunged {}
-    set passwords {}
-    foreach thing $ConnectionInfo {
-	set name [value $thing ConnectionName]
-	set password [value $thing Password]
-	set pwindex [lsearch -exact $thing Password]
-	set safe [lreplace $thing $pwindex [expr $pwindex+1]]
-	set pwd [list ConnectionName $name Password $password]
-	lappend expunged $safe
-	lappend passwords $pwd
-    }
-    puts $fp $expunged
-    close $fp
-    set fp [open "$PasswordFile.new" "w"]
-    exec chmod 600 "$PasswordFile.new"
-    puts $fp "# RP-PPPoE GUI Configuration Information."
-    puts $fp "# This file may *look* human-editable, but it is NOT."
-    puts $fp "# So, you with the text editor:  Keep away from this file."
-    puts $fp "#"
-    puts $fp $passwords
-    close $fp
-    file rename -force "$ConnectionInfoFile.new" "$ConnectionInfoFile"
-    file rename -force "$PasswordFile.new" "$PasswordFile"
-
-    # Generate config files for adsl-start for each connection
-    foreach thing $ConnectionInfo {
-	GenerateConfigFile $thing
-    }
-
-    # Now update /etc/ppp/pap-secrets and /etc/ppp/chap-secrets
-    foreach thing $ConnectionInfo {
-	GenerateSecretsEntry $thing
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: ReadShellEscapedWord
-# %ARGUMENTS:
-#  str -- a string
-# %RETURNS:
-#  A two-element list -- the first element is a shell-escaped word
-#  extracted from $str, just the way pppd parses /etc/ppp/pap-secrets.
-#  The second element is the remaining portion of $str
-#***********************************************************************
-proc ReadShellEscapedWord { str } {
-    set ans {}
-    set rest $str
-
-    # Chew up leading spaces
-    set rest [string trimleft $rest]
-
-    # If first char is a quote, read until a quote
-    if {"[string index $rest 0]" == "\""} {
-	set rest [string range $rest 1 end]
-	set nextquote [string first "\"" $rest]
-	# If no following quote, pretend we haven't seen a quote, I guess.
-	if {$nextquote >= 0} {
-	    set ans [string range $rest 0 [expr $nextquote-1]]
-	    set rest [string range $rest [expr $nextquote+1] end]
-	    return [list $ans $rest]
-	}
-    }
-
-    # Not a quote; chew through the string until an unescaped space
-    while {[string length $rest] > 0} {
-	set char [string index $rest 0]
-	set rest [string range $rest 1 end]
-	# Sneaky test for whitespace in Tcl 8.0
-	if {"[string trim $char]" == ""} {
-	    return [list $ans $rest]
-	}
-	if {"$char" == "\\"} {
-	    set char [string index $rest 0]
-	    set rest [string range $rest 1 end]
-	}
-	append ans $char
-    }
-    return [list $ans $rest]
-}
-
-
-#***********************************************************************
-# %PROCEDURE: GenerateSecretsEntry
-# %ARGUMENTS:
-#  conn -- a connection key/value list
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Adds entries to /etc/ppp/pap-secrets and /etc/ppp/chap-secrets.
-#***********************************************************************
-proc GenerateSecretsEntry { conn } {
-    set user [value $conn UserName]
-    set net [value $conn NetworkName]
-    set password [value $conn Password]
-    if {"$net" != ""} {
-	set user "$user@$net"
-    }
-    GenerateSecretsEntryForFile $user $password "/etc/ppp/pap-secrets"
-    GenerateSecretsEntryForFile $user $password "/etc/ppp/chap-secrets"
-}
-
-#***********************************************************************
-# %PROCEDURE: GenerateSecretsEntryForFile
-# %ARGUMENTS:
-#  user -- user name
-#  password -- password
-#  fname -- file to add entry to.
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Adds entries to /etc/ppp/pap-secrets or /etc/ppp/chap-secrets.
-#***********************************************************************
-proc GenerateSecretsEntryForFile { user password fname } {
-    # Copy $fname to $fname.new
-    set out [open "$fname.new" "w"]
-    exec chmod go-rwx "$fname.new"
-    if {[file exists $fname]} {
-	set in [open $fname "r"]
-	while {[gets $in line] >= 0} {
-	    set trimmed [string trim $line]
-	    if {"$trimmed" == ""} {
-		puts $out $line
-		continue
-	    }
-	    if {[string match "#*" $trimmed]} {
-		puts $out $line
-		continue
-	    }
-
-	    # Read the user name off the line; copy it unless it's our
-	    # user name.
-	    foreach {word dummy} [ReadShellEscapedWord $line] {break}
-	    if {$word != $user} {
-		puts $out $line
-	    }
-	}
-	close $in
-    }
-
-    # Now add our line
-    set user [ShellEscape $user]
-    set password [ShellEscape $password]
-    puts $out "$user\t*\t$password\t*"
-    close $out
-    file rename -force $fname.new $fname
-}
-
-#***********************************************************************
-# %PROCEDURE: ShellEscape
-# %ARGUMENTS:
-#  str
-# %RETURNS:
-#  A version of $str with shell meta-characters escaped
-#***********************************************************************
-proc ShellEscape { str } {
-    set ans ""
-    foreach char [split $str ""] {
-	if {[string first $char "01234567890ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_+=-@./"] >= 0} {
-	    append ans $char
-	} else {
-	    append ans "\\$char"
-	}
-    }
-    return $ans
-}
-
-
-#***********************************************************************
-# %PROCEDURE: GenerateConfigFile
-# %ARGUMENTS:
-#  conn -- a connection key/value list
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Generates a configuration file for adsl-start and friends under
-#  /etc/ppp/rp-pppoe-gui
-#***********************************************************************
-proc GenerateConfigFile { conn } {
-    global ConfigDir
-    set name [value $conn ConnectionName]
-    set fname [file join $ConfigDir conf.$name]
-    set fp [open "$fname.new" w]
-    puts $fp "# Configuration file for connection `$name'."
-    puts $fp "# Automatically generated.  Do not edit by hand."
-    puts $fp ""
-    foreach {var val} $conn {
-	switch -exact $var {
-	    UserName {
-		set net [value $conn NetworkName]
-		if {"$net" != ""} {
-		    set user "$val@$net"
-		} else {
-		    set user "$val"
-		}
-		puts $fp [ShellEscape "USER=$user"]
-	    }
-	    Interface {
-		puts $fp [ShellEscape "ETH=$val"]
-	    }
-	    DNSType {
-		if {"$val" == "From Server"} {
-		    puts $fp "DNSTYPE=SERVER"
-		    puts $fp "USEPEERDNS=yes"
-		} elseif {"$val" == "Specify"} {
-		    puts $fp "DNSTYPE=SPECIFY"
-		    puts $fp "USEPEERDNS=no"
-		} else {
-		    puts $fp "DNSTYPE=NOCHANGE"
-		    puts $fp "USEPEERDNS=no"
-		}
-	    }
-	    DNS1 {
-		puts $fp [ShellEscape "DNS1=$val"]
-	    }
-	    DNS2 {
-		puts $fp [ShellEscape "DNS2=$val"]
-	    }
-	    NonrootOK {
-		if {$val} {
-		    puts $fp "NONROOT=OK"
-		}
-	    }
-	    ACName {
-		puts $fp [ShellEscape "ACNAME=$val"]
-	    }
-	    ServiceName {
-		puts $fp [ShellEscape "SERVICENAME=$val"]
-	    }
-	    FirewallType {
-		if {"$val" == "None"} {
-		    puts $fp "FIREWALL=NONE"
-		} elseif {"$val" == "Masquerading"} {
-		    puts $fp "FIREWALL=MASQUERADE"
-		} else {
-		    puts $fp "FIREWALL=STANDALONE"
-		}
-	    }
-	    Sync {
-		if {$val} {
-		    puts $fp "SYNCHRONOUS=yes"
-		} else {
-		    puts $fp "SYNCHRONOUS=no"
-		}
-	    }
-	}
-    }
-    puts $fp "CONNECT_TIMEOUT=30"
-    puts $fp "CONNECT_POLL=1"
-    puts $fp "FORCEPING=\".\""
-    puts $fp "PIDFILE=/var/run/adsl-$name.pid"
-    puts $fp "CLAMPMSS=1412"
-    puts $fp "LCP_INTERVAL=20"
-    puts $fp "LCP_FAILURE=3"
-    puts $fp "PPPOE_TIMEOUT=80"
-    puts $fp "LINUX_PLUGIN="
-    puts $fp "DEMAND=no"
-    close $fp
-    file rename -force "$fname.new" "$fname"
-}
-
-#***********************************************************************
-# %PROCEDURE: GetConnectionStatus
-# %ARGUMENTS:
-#  conn -- connection name
-# %RETURNS:
-#  A three-element list:
-#  {started/stopped up/down if}
-#  If first element is "started", then connection has been started.
-#  If second element is "up", then connection is up.
-#  If connection is up, third element is PPP interface.
-#***********************************************************************
-proc GetConnectionStatus { conn } {
-    set pidfile "/var/run/adsl-$conn.pid"
-
-    # Check for PID file
-    if {![file readable $pidfile]} {
-	return {stopped down ""}
-    }
-    set fp [open $pidfile "r"]
-    gets $fp pid
-    close $fp
-
-    # Check if process is dead
-    if {![file exists "/proc/$pid"]} {
-	# The pppd might still be running... doh...
-	if {![file readable "$pidfile.pppd"]} {
-	    return {stopped down ""}
-	}
-	set fp [open "$pidfile.pppd" "r"]
-	gets $fp pid
-	close $fp
-	if {![file exists "/proc/$pid"]} {
-	    return {stopped down ""}
-	}
-    }
-
-    # Now get PID of pppd
-    if {![file readable "$pidfile.pppd"]} {
-	return {started down ""}
-    }
-    set fp [open "$pidfile.pppd" "r"]
-    gets $fp pid
-    close $fp
-
-    # Find interface to which it corresponds
-    set pppdfiles [glob -nocomplain "/var/run/ppp*.pid"]
-    set found {}
-    foreach file $pppdfiles {
-	set fp [open $file "r"]
-	gets $fp ifpid
-	close $fp
-	if {$ifpid == $pid} {
-	    set found [file rootname [file tail $file]]
-	    break
-	}
-    }
-    if {"$found" == ""} {
-	return {started down ""}
-    }
-    return [list started up $found]
-}
-
-#***********************************************************************
-# %PROCEDURE: UpdateConnectionState
-# %ARGUMENTS:
-#  fromAfter -- if 1, was called from an "after" callback.
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Updates the "LED" displays; periodically reschedules itself to keep
-#  updating display.
-#***********************************************************************
-proc UpdateConnectionState {{fromAfter 1}} {
-    global UpdateToken
-    global Packets
-    global Bytes
-    global UpdateInterval
-    global MeasureTime
-    if {$fromAfter} {
-	set UpdateToken ""
-    }
-
-    set conn [GetCurrentConnection]
-    if {"$conn" == ""} {
-	ConnectionStateOff
-	ResetGraph
-	if {"$UpdateToken" != ""} {
-	    after cancel $UpdateToken
-	    set UpdateToken {}
-	}
-	return
-    }
-
-    foreach {startstop updown interface} [GetConnectionStatus $conn] {break}
-    if {"$startstop" == "stopped"} {
-	ConnectionStateOff
-	ResetGraph
-    } elseif {"$updown" == "down"} {
-	ConnectionStateDown
-	ResetGraph
-    } else {
-	# Get the packet counts
-	set found 0
-	set fp [open "/proc/net/dev" "r"]
-	while {[gets $fp line] >= 0} {
-	    if {![string match "*$interface:*" $line]} {
-		continue
-	    }
-	    set colon [string first ":" $line]
-	    if {$colon < 0} {
-		continue
-	    }
-	    set line [string range $line [expr $colon+1] end]
-	    set found 1
-	    set MeasureTime [clock seconds]
-	    break
-	}
-	close $fp
-	if {$found} {
-	    foreach {rbytes rpacks rerrs rdrop rfifo rframe rcomp rmulti tbytes tpacks} $line {break}
-	    if {!$fromAfter} {
-		set Packets(in) $rpacks
-		set Packets(out) $tpacks
-		set Bytes(in) $rbytes
-		set Bytes(out) $tbytes
-		ConnectionStateUp
-		ResetGraph
-	    } else {
-		if {$rpacks != $Packets(in)} {
-		    ConnectionReceiveActive
-		} else {
-		    ConnectionReceiveUp
-		}
-		if {$tpacks != $Packets(out)} {
-		    ConnectionTransmitActive
-		} else {
-		    ConnectionTransmitUp
-		}
-		set Packets(in) $rpacks
-		set Packets(out) $tpacks
-		set Bytes(in) $rbytes
-		set Bytes(out) $tbytes
-		UpdateGraph
-	    }
-	} else {
-	    ConnectionStateUp
-	    ResetGraph
-	}
-    }
-    if {"$UpdateToken" == ""} {
-	set UpdateToken [after $UpdateInterval UpdateConnectionState]
-    }
-    if {$fromAfter} {
-	SetButtonStates
-    }
-}
-
-proc ConnectionStateOff {} {
-    .c itemconfigure xmitrect -fill "#A0A0A0"
-    .c itemconfigure recvrect -fill "#A0A0A0"
-}
-
-proc ConnectionStateDown {} {
-    .c itemconfigure xmitrect -fill "#A00000"
-    .c itemconfigure recvrect -fill "#A00000"
-}
-
-proc ConnectionStateUp {} {
-    .c itemconfigure xmitrect -fill "#00D000"
-    .c itemconfigure recvrect -fill "#00D000"
-}
-
-proc ConnectionTransmitActive {} {
-    .c itemconfigure xmitrect -fill "#FFFF00"
-}
-
-proc ConnectionTransmitUp {} {
-    .c itemconfigure xmitrect -fill "#00D000"
-}
-
-proc ConnectionReceiveActive {} {
-    .c itemconfigure recvrect -fill "#FFFF00"
-}
-
-proc ConnectionReceiveUp {} {
-    .c itemconfigure recvrect -fill "#00D000"
-}
-
-proc ResetGraph {} {
-    global GraphPoints
-    set GraphPoints(in) {}
-    set GraphPoints(out) {}
-    set GraphPoints(times) {}
-    .graph delete all
-    UpdateGraph
-}
-
-proc UpdateGraph {} {
-    global GraphPoints Bytes UpdateInterval MeasureTime
-    lappend GraphPoints(times) $MeasureTime
-    lappend GraphPoints(in) $Bytes(in)
-    lappend GraphPoints(out) $Bytes(out)
-
-    set w [winfo width .graph]
-    set w2 [expr $w/2]
-
-    set h [winfo height .graph]
-    set toChop [expr [llength $GraphPoints(in)] - $w2 - 1]
-    if {$toChop > 0} {
-	set GraphPoints(in) [lrange $GraphPoints(in) $toChop end]
-    }
-    set toChop [expr [llength $GraphPoints(out)] - $w2 - 1]
-    if {$toChop > 0} {
-	set GraphPoints(out) [lrange $GraphPoints(out) $toChop end]
-    }
-    set toChop [expr [llength $GraphPoints(times)] - $w2 - 1]
-    if {$toChop > 0} {
-	set GraphPoints(times) [lrange $GraphPoints(times) $toChop end]
-    }
-
-    set prev [lindex $GraphPoints(in) 0]
-    set incoords {}
-    set outcoords {}
-    set inmax 0
-    set outmax 0
-    foreach thing [lrange $GraphPoints(in) 1 end] {
-	set diff [expr $thing - $prev]
-	set prev $thing
-	lappend incoords $diff
-	if {$diff > $inmax} {
-	    set inmax $diff
-	}
-    }
-
-    set prev [lindex $GraphPoints(out) 0]
-    foreach thing [lrange $GraphPoints(out) 1 end] {
-	set diff [expr $thing - $prev]
-	set prev $thing
-	lappend outcoords $diff
-	if {$diff > $outmax} {
-	    set outmax $diff
-	}
-    }
-
-    if {$inmax == 0} { set inmax 1 }
-    if {$outmax == 0} { set outmax 1 }
-    # Draw the transmit line
-    set x 0
-    set hh [expr $h-4]
-    set scaled {}
-    foreach thing $outcoords {
-	lappend scaled $x [expr double($h) - 2 - (double($hh) * double($thing) / double($outmax))]
-	incr x
-    }
-
-    .graph delete all
-    if {[llength $scaled] >= 4} {
-	eval ".graph create line $scaled -fill #A00000"
-	set bits [expr 8.0 * ([lindex $GraphPoints(out) end] - [lindex $GraphPoints(out) 0])]
-	set timediff [expr [lindex $GraphPoints(times) end] - [lindex $GraphPoints(times) 0]]
-	if {$timediff != 0} {
-	    set bps [Pretty [expr double($bits) / $timediff]]
-	    .graph create text 2 2 -anchor nw -font fixed -text "$bps"
-	}
-    }
-
-    # Draw the receive line
-    set x $w2
-    set scaled {}
-    foreach thing $incoords {
-	lappend scaled $x [expr double($h) - 2 - (double($hh) * double($thing) / double($inmax))]
-	incr x
-    }
-
-    if {[llength $scaled] >= 4} {
-	eval ".graph create line $scaled -fill #00A000"
-	set bits [expr 8.0 * ([lindex $GraphPoints(in) end] - [lindex $GraphPoints(in) 0])]
-	set timediff [expr [lindex $GraphPoints(times) end] - [lindex $GraphPoints(times) 0]]
-	if {$timediff != 0} {
-	    set bps [Pretty [expr double($bits) / $timediff]]
-	    .graph create text [expr $w2+2] 2 -anchor nw -font fixed -text "$bps"
-	}
-    }
-}
-
-proc Pretty { n } {
-    if {$n < 0} {
-	return "***"
-    }
-    if {$n < 1000} {
-	return [format "%.1f" $n]
-    }
-    set n [expr $n/1000.0]
-    if {$n < 1000} {
-	return [format "%.1fk" $n]
-    }
-    set n [expr $n/1000.0]
-    if {$n < 1000} {
-	return [format "%.1fM" $n]
-    }
-    set n [expr $n/1000.0]
-    return [format "%.1fG" $n]
-}
-
-#***********************************************************************
-# %PROCEDURE: Help
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Opens help page
-#***********************************************************************
-proc Help {} {
-    if {![file readable /usr/share/rp-pppoe-gui/tkpppoe.html]} {
-	    tk_dialog .err Error "Help file '/usr/share/rp-pppoe-gui/tkpppoe.html' is not installed" error 0 OK	
-	return
-    }
-    catch { exec /bin/sh -c "netscape -remote 'openURL(/usr/share/rp-pppoe-gui/tkpppoe.html)' || netscape /usr/share/rp-pppoe-gui/tkpppoe.html" > /dev/null 2>/dev/null & }
-}
-
-	
-
-#***********************************************************************
-# %PROCEDURE: doLogo
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Does the logo thing
-#***********************************************************************
-proc doLogo {} {
-    global AlreadyRunFile ConfigDir
-    if {[file exists $AlreadyRunFile]} {
-	return
-    }
-    catch { file mkdir $ConfigDir }
-    catch { close [open $AlreadyRunFile "w"] }
-    canvas .c -width 374 -height 286 -bg #FFFFCC
-    pack .c
-    drawLogo .c #FFFFCC
-
-    # Funky effect
-    .c create text 4 4 -anchor nw -text "Welcome to RP-PPPoE" \
-	    -fill red -font {-family times -size -24 -weight bold} -tags pppoe
-    .c lower pppoe
-
-    .c move logo -300 0
-
-    update idletasks
-
-    for {set i 0} {$i < 15} {incr i} {
-	.c move logo 20 0
-	update idletasks
-	after 25
-    }
-
-    .c create text 4 28 -anchor nw -text "http://www.roaringpenguin.com" \
-	    -fill red -font {-family courier -size -14 -weight bold}
-    update idletasks
-    after 2500
-}
-
-doLogo
-catch { destroy .c }
-
-# Try creating an empty config file if none exists
-if {![file readable $ConnectionInfoFile]} {
-    catch { file mkdir $ConfigDir }
-    catch {
-	set fp [open $ConnectionInfoFile "w"]
-	close $fp
-    }
-}
-
-CreateMainDialog
diff --git a/mdk-stage1/rp-pppoe/gui/wrapper.c b/mdk-stage1/rp-pppoe/gui/wrapper.c
deleted file mode 100644
index e2b99662a..000000000
--- a/mdk-stage1/rp-pppoe/gui/wrapper.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/* -*-Mode: C;-*- */
-
-/***********************************************************************
-*
-* wrapper.c
-*
-* C wrapper designed to run SUID root for controlling PPPoE connections.
-*
-* Copyright (C) 2001 by Roaring Penguin Software Inc.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#define _SVID_SOURCE 1 /* For putenv */
-#define _POSIX_SOURCE 1 /* For fileno */
-#define _BSD_SOURCE 1 /* For setreuid */
-#include <stdlib.h>
-#include <string.h>
-#include <stdio.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <unistd.h>
-
-#define CONN_NAME_LEN 64
-#define LINELEN 512
-
-static char const *adsl_start = ADSL_START_PATH;
-static char const *adsl_stop = ADSL_STOP_PATH;
-static char const *adsl_status = ADSL_STATUS_PATH;
-
-/**********************************************************************
- *%FUNCTION: PathOK
- *%ARGUMENTS:
- * fname -- a file name.
- *%RETURNS:
- * 1 if path to fname is secure; 0 otherwise.
- *%DESCRIPTION:
- * Makes sure ownership/permissions of file and parent directories
- * are safe.
- **********************************************************************/
-static int
-PathOK(char const *fname)
-{
-    char path[LINELEN];
-    struct stat buf;
-    char const *slash;
-
-    if (strlen(fname) > LINELEN) {
-	fprintf(stderr, "Pathname '%s' too long\n", fname);
-	return 0;
-    }
-
-    /* Must be absolute path */
-    if (*fname != '/') {
-	fprintf(stderr, "Unsafe path '%s' not absolute\n", fname);
-	return 0;
-    }
-
-    /* Check root directory */
-    if (stat("/", &buf) < 0) {
-	perror("stat");
-	return 0;
-    }
-    if (buf.st_uid) {
-	fprintf(stderr, "SECURITY ALERT: Root directory (/) not owned by root\n");
-	return 0;
-    }
-    if (buf.st_mode & (S_IWGRP | S_IWOTH)) {
-	fprintf(stderr, "SECURITY ALERT: Root directory (/) writable by group or other\n");
-	return 0;
-    }
-
-    /* Check each component */
-    slash = fname;
-
-    while(*slash) {
-	slash = strchr(slash+1, '/');
-	if (!slash) {
-	    slash = fname + strlen(fname);
-	}
-	memcpy(path, fname, slash-fname);
-	path[slash-fname] = 0;
-	if (stat(path, &buf) < 0) {
-	    perror("stat");
-	    return 0;
-	}
-	if (buf.st_uid) {
-	    fprintf(stderr, "SECURITY ALERT: '%s' not owned by root\n", path);
-	    return 0;
-	}
-
-	if (buf.st_mode & (S_IWGRP | S_IWOTH)) {
-	    fprintf(stderr, "SECURITY ALERT: '%s' writable by group or other\n",
-		    path);
-	    return 0;
-	}
-    }
-    return 1;
-}
-
-/**********************************************************************
- *%FUNCTION: CleanEnvironment
- *%ARGUMENTS:
- * envp -- environment passed to main
- *%RETURNS:
- * Nothing
- *%DESCRIPTION:
- * Deletes all environment variables; makes safe environment
- **********************************************************************/
-static void
-CleanEnvironment(char *envp[])
-{
-    envp[0] = NULL;
-    putenv("PATH=/bin:/usr/bin:/sbin:/usr/sbin");
-}
-
-/**********************************************************************
- *%FUNCTION: main
- *%ARGUMENTS:
- * argc, argv -- usual suspects
- * Usage: pppoe-wrapper {start|stop|status} {connection_name}
- *%RETURNS:
- * Whatever adsl-start, adsl-stop or adsl-status returns.
- *%DESCRIPTION:
- * Runs adsl-start, adsl-stop or adsl-status on given connection if
- * non-root users are allowed to do it.
- **********************************************************************/
-int
-main(int argc, char *argv[])
-{
-    int amRoot;
-    char *cp;
-    char fname[64+CONN_NAME_LEN];
-    char line[LINELEN+1];
-    int allowed = 0;
-
-    FILE *fp;
-
-    extern char **environ;
-
-    /* Clean out environment */
-    CleanEnvironment(environ);
-    
-    /* Are we root? */
-    amRoot = (getuid() == 0);
-
-    /* Validate arguments */
-    if (argc != 3) {
-	fprintf(stderr, "Usage: %s {start|stop|status} connection_name\n",
-		argv[0]);
-	exit(1);
-    }
-
-    if (strcmp(argv[1], "start") &&
-	strcmp(argv[1], "stop") &&
-	strcmp(argv[1], "status")) {
-	fprintf(stderr, "Usage: %s {start|stop|status} connection_name\n",
-		argv[0]);
-	exit(1);
-    }
-
-    /* Connection name can be at most CONN_NAME_LEN chars; alpha, num, underscore */
-    if (strlen(argv[2]) > CONN_NAME_LEN) {
-	fprintf(stderr, "%s: Connection name '%s' too long.\n",
-		argv[0], argv[2]);
-	exit(1);
-    }
-
-    for (cp = argv[2]; *cp; cp++) {
-	if (!strchr("abcdefghijklmnopqrstuvwxyz"
-		    "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
-		    "0123456789_-", *cp)) {
-	    fprintf(stderr, "%s: Connection name '%s' contains illegal character '%c'\n", argv[0], argv[2], *cp);
-	    exit(1);
-	}
-    }
-
-    /* Open the connection file */
-    sprintf(fname, "/etc/ppp/rp-pppoe-gui/conf.%s", argv[2]);
-    /* Check path sanity */
-    if (!PathOK(fname)) {
-	exit(1);
-    }
-
-    fp = fopen(fname, "r");
-    if (!fp) {
-	fprintf(stderr, "%s: Could not open '%s': %s\n",
-		argv[0], fname, strerror(errno));
-	exit(1);
-    }
-
-    /* Check if non-root users can control it */
-    if (amRoot) {
-	allowed = 1;
-    } else {
-	while (!feof(fp)) {
-	    if (!fgets(line, LINELEN, fp)) {
-		break;
-	    }
-	    if (!strcmp(line, "NONROOT=OK\n")) {
-		allowed = 1;
-		break;
-	    }
-	}
-    }
-    fclose(fp);
-
-    if (!allowed) {
-	fprintf(stderr, "%s: Non-root users are not permitted to control connection '%s'\n", argv[0], argv[2]);
-	exit(1);
-    }
-
-    /* Become root with setuid() to defeat is-root checks in shell scripts */
-    if (setreuid(0, 0) < 0) {
-	perror("setreuid");
-	exit(1);
-    }
-       
-    /* It's OK -- do it.  */
-    if (!strcmp(argv[1], "start")) {
-	if (!PathOK(adsl_start)) exit(1);
-	execl(adsl_start, "adsl-start", fname, NULL);
-    } else if (!strcmp(argv[1], "stop")) {
-	if (!PathOK(adsl_stop)) exit(1);
-	execl(adsl_stop, "adsl-stop", fname, NULL);
-    } else {
-	if (!PathOK(adsl_status)) exit(1);
-	execl(adsl_status, "adsl-status", fname, NULL);
-    }
-    fprintf(stderr, "%s: execl: %s\n", argv[0], strerror(errno));
-    exit(1);
-}
diff --git a/mdk-stage1/rp-pppoe/man/adsl-connect.8 b/mdk-stage1/rp-pppoe/man/adsl-connect.8
deleted file mode 100644
index 1b34a74e5..000000000
--- a/mdk-stage1/rp-pppoe/man/adsl-connect.8
+++ /dev/null
@@ -1,66 +0,0 @@
-.\" $Id$
-.TH ADSL-CONNECT 8 "21 February 2000"
-.UC 4
-.SH NAME
-adsl-connect \- Shell script to manage a PPPoE link
-
-.SH SYNOPSIS
-.B adsl-connect \fR[\fIconfig_file\fR]
-.P
-.B adsl-connect \fR\fIinterface user\fR [\fIconfig_file\fR]
-
-
-.SH DESCRIPTION
-\fBadsl-connect\fR is a shell script which manages an ADSL connection
-using the Roaring Penguin user-space PPPoE client.  If you omit
-\fIconfig_file\fR, the default file \fB/etc/ppp/pppoe.conf\fR is used.
-If you supply \fIinterface\fR and \fIuser\fR, then they override the
-Ethernet interface and user-name settings in the configuration file.
-.P
-Note that normally, you should \fInot\fR invoke \fBadsl-connect\fR
-directly.  Instead, use \fBadsl-start\fR to bring up the ADSL connection.
-.P
-\fBadsl-connect\fR first reads a configuration file.  It then brings
-up a PPPoE connection.  If the connection ever drops, a message is logged
-to syslog, and \fBadsl-connect\fR re-establishes the connection.  In addition,
-each time the connection is dropped or cannot be established,
-\fBadsl-connect\fR executes the script \fB/etc/ppp/adsl-lost\fR if it
-exists and is executable.
-
-.P
-The shell script \fBadsl-stop\fR causes \fBadsl-connect\fR to break out
-of its loop, bring the connection down, and exit.
-
-.SH TECHNICAL DETAILS
-\fBadsl-connect\fR uses the following shell variables from the
-configuration file:
-
-.TP
-.B ETH
-The Ethernet interface connected to the ADSL modem (for example, eth0).
-
-.TP
-.B USER
-The ADSL user-id (for example, b1xxnxnx@sympatico.ca).
-
-.TP
-.B PIDFILE
-A file in which to write the process-ID of the adsl-connect process
-(for example, \fB/var/run/pppoe.pid\fR).  Two additional files
-($PIDFILE.pppd and $PIDFILE.pppoe) hold the process-ID's of the
-\fBpppd\fR and \fBpppoe\fR processes, respectively.
-
-.P
-By using different configuration files with different PIDFILE
-settings, you can manage multiple PPPoE connections.  Just specify the
-configuration file as an argument to \fBadsl-start\fR and
-\fBadsl-stop\fR.
-
-.SH AUTHOR
-\fBadsl-connect\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-start(8), adsl-stop(8), pppd(8), pppoe.conf(5), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-server(8), pppoe-relay(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/adsl-setup.8 b/mdk-stage1/rp-pppoe/man/adsl-setup.8
deleted file mode 100644
index 9e78fa547..000000000
--- a/mdk-stage1/rp-pppoe/man/adsl-setup.8
+++ /dev/null
@@ -1,23 +0,0 @@
-.\" $Id$ 
-.TH ADSL-SETUP 8 "21 February 2000"
-.UC 4
-.SH NAME
-adsl-setup \- Shell script to configure Roaring Penguin PPPoE client
-.SH SYNOPSIS
-.B adsl-setup
-
-.SH DESCRIPTION
-\fBadsl-setup\fR is a shell script which prompts you for various pieces
-of information and sets up an /etc/ppp/pppoe.conf configuration script
-for the \fBadsl-start\fR, \fBadsl-stop\fR and \fBadsl-connect\fR scripts.
-
-.SH AUTHOR
-\fBadsl-setup\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8),
-pppoe.conf(5), adsl-status(8), pppoe-sniff(8), pppoe-relay(8),
-pppoe-server(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/adsl-start.8 b/mdk-stage1/rp-pppoe/man/adsl-start.8
deleted file mode 100644
index 87250b381..000000000
--- a/mdk-stage1/rp-pppoe/man/adsl-start.8
+++ /dev/null
@@ -1,27 +0,0 @@
-.\" $Id$ 
-.TH ADSL-START 8 "21 February 2000"
-.UC 4
-.SH NAME
-adsl-start \- Shell script to bring up a PPPoE link
-.SH SYNOPSIS
-.B adsl-start \fR[\fIconfig_file\fR]
-.P
-.B adsl-start \fR\fIinterface user\fR [\fIconfig_file\fR]
-
-.SH DESCRIPTION
-\fBadsl-start\fR is a shell script which starts the Roaring Penguin
-user-space PPPoE client.  If you omit \fIconfig_file\fR, the default
-file \fB/etc/ppp/pppoe.conf\fR is used.  If you supply
-\fIinterface\fR and \fIuser\fR, then they override the Ethernet interface
-and user-name settings in the configuration file.
-
-.SH AUTHOR
-\fBadsl-start\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5),
-adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-relay(8),
-pppoe-server(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/adsl-status.8 b/mdk-stage1/rp-pppoe/man/adsl-status.8
deleted file mode 100644
index 2114d461e..000000000
--- a/mdk-stage1/rp-pppoe/man/adsl-status.8
+++ /dev/null
@@ -1,25 +0,0 @@
-.\" $Id$ 
-.TH ADSL-STATUS 8 "16 March 2000"
-.UC 4
-.SH NAME
-adsl-status \- Shell script to report on status of PPPoE link
-.SH SYNOPSIS
-.B adsl-status \fR[\fIconfig_file\fR]
-
-.SH DESCRIPTION
-\fBadsl-status\fR is a shell script which checks the status of the
-PPPoE link established by the Roaring Penguin user-space PPPoE client.
-If you omit \fIconfig_file\fR, the default file
-\fB/etc/ppp/pppoe.conf\fR is used.
-
-.SH AUTHOR
-\fBadsl-status\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-start(8), adsl-connect(8), pppd(8), pppoe.conf(5),
-adsl-setup(8), adsl-stop(8), pppoe-sniff(8), pppoe-relay(8),
-pppoe-server(8)
-
-
diff --git a/mdk-stage1/rp-pppoe/man/adsl-stop.8 b/mdk-stage1/rp-pppoe/man/adsl-stop.8
deleted file mode 100644
index 2ac7fef8e..000000000
--- a/mdk-stage1/rp-pppoe/man/adsl-stop.8
+++ /dev/null
@@ -1,21 +0,0 @@
-.\" $Id$ 
-.TH ADSL-STOP 8 "21 February 2000"
-.UC 4
-.SH NAME
-adsl-stop \- Shell script to shut down a PPPoE link
-.SH SYNOPSIS
-.B adsl-stop \fR[\fIconfig_file\fR]
-
-.SH DESCRIPTION
-\fBadsl-stop\fR is a shell script which stops the Roaring Penguin
-user-space PPPoE client.  If you omit \fIconfig_file\fR, the default
-file \fB/etc/ppp/pppoe.conf\fR is used.
-
-.SH AUTHOR
-\fBadsl-stop\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-start(8), adsl-connect(8), pppd(8), pppoe.conf(5), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-relay(8), pppoe-server(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/pppoe-relay.8 b/mdk-stage1/rp-pppoe/man/pppoe-relay.8
deleted file mode 100644
index 5f79b09a1..000000000
--- a/mdk-stage1/rp-pppoe/man/pppoe-relay.8
+++ /dev/null
@@ -1,124 +0,0 @@
-.\" $Id$ 
-.TH PPPOE-RELAY 8 "26 January 2001"
-.\""
-.UC 4
-.SH NAME
-pppoe-relay \- user-space PPPoE relay agent.
-.SH SYNOPSIS
-.B pppoe-relay \fR[\fIoptions\fR]
-
-.SH DESCRIPTION
-\fBpppoe-relay\fR is a user-space relay agent for PPPoE
-(Point-to-Point Protocol over Ethernet) for Linux.  \fBpppoe-relay\fR
-works in concert with the \fBpppoe\fR client and \fBpppoe-server\fR
-server.  See the OPERATION section later in this manual for
-details on how \fBpppoe-relay\fR works.
-
-.SH OPTIONS
-.TP
-.B \-S \fIinterface\fR
-Adds the Ethernet interface \fIinterface\fR to the list of interfaces
-managed by \fBpppoe-relay\fR.  Only PPPoE servers may be connected to
-this interface.
-
-.TP
-.B \-C \fIinterface\fR
-Adds the Ethernet interface \fIinterface\fR to the list of interfaces
-managed by \fBpppoe-relay\fR.  Only PPPoE clients may be connected to
-this interface.
-
-.TP
-.B \-B \fIinterface\fR
-Adds the Ethernet interface \fIinterface\fR to the list of interfaces
-managed by \fBpppoe-relay\fR.  Both PPPoE clients and servers may be
-connected to this interface.
-
-.TP
-.B \-n \fInum\fR
-Allows at most \fInum\fR concurrent PPPoE sessions.  If not specified,
-the default is 5000.  \fInum\fR can range from 1 to 65534.
-
-.TP
-.B \-i \fItimeout\fR
-Specifies the session idle timeout.  If both peers in a session are idle
-for more than \fItimeout\fR seconds, the session is terminated.
-If \fItimeout\fR is specified as zero, sessions will never be terminated
-because of idleness.
-
-Note that the idle-session expiry routine is never run more frequently than
-every 30 seconds, so the timeout is approximate.  The default value for
-\fItimeout\fR is 600 seconds (10 minutes.)
-
-.TP
-.B \-F
-The \fB\-F\fR option causes \fBpppoe-relay\fR \fInot\fR to fork into the
-background; instead, it remains in the foreground.
-
-.TP
-.B \-h
-The \fB\-h\fR option prints a brief usage message and exits.
-
-.SH OPERATION
-
-\fBpppoe-relay\fR listens for incoming PPPoE PADI frames on all interfaces
-specified with \fB-B\fR or \fB-C\fR options.  When a PADI frame appears,
-\fBpppoe-relay\fR adds a Relay-Session-ID tag and broadcasts the PADI
-on all interfaces specified with \fB-B\fR or \fB-S\fR options (except the
-interface on which the frame arrived.)
-
-Any PADO frames received are relayed back to the client which sent the
-PADI (assuming they contain valid Relay-Session-ID tags.)  Likewise,
-PADR frames from clients are relayed back to the matching access
-concentrator.
-
-When a PADS frame is received, \fBpppoe-relay\fR enters the two peers'
-MAC addresses and session-ID's into a hash table.  (The session-ID seen
-by the access concentrator may be different from that seen by the client;
-\fBpppoe-relay\fR must renumber sessions to avoid the possibility of duplicate
-session-ID's.)  Whenever either peer sends a session frame, \fBpppoe-relay\fR
-looks up the session entry in the hash table and relays the frame to
-the correct peer.
-
-When a PADT frame is received, \fBpppoe-relay\fR relays it to the peer
-and deletes the session entry from its hash table.
-
-If a client and server crash (or frames are lost), PADT frames may never
-be sent, and \fBpppoe-relay\fR's hash table can fill up with stale sessions.
-Therefore, a session-cleaning routine runs periodically, and removes old
-sessions from the hash table.  A session is considered "old" if no traffic
-has been seen within \fItimeout\fR seconds.  When a session is deleted because
-of a timeout, a PADT frame is sent to each peer to make certain that they
-are aware the session has been killed.
-
-.SH EXAMPLE INVOCATIONS
-
-.nf
-pppoe-relay -C eth0 -S eth1
-.fi
-
-The example above relays frames between PPPoE clients on the eth0 network
-and PPPoE servers on the eth1 network.
-
-.nf
-pppoe-relay -B eth0 -B eth1
-.fi
-
-This example is a transparent relay -- frames are relayed between any mix
-of clients and servers on the eth0 and eth1 networks.
-
-.nf
-pppoe-relay -S eth0 -C eth1 -C eth2 -C eth3
-.fi
-
-This example relays frames between servers on the eth0 network and
-clients on the eth1, eth2 and eth3 networks.
-
-.SH AUTHORS
-\fBpppoe-relay\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5),
-pppoe(8), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-server(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/pppoe-server.8 b/mdk-stage1/rp-pppoe/man/pppoe-server.8
deleted file mode 100644
index aacf11f1f..000000000
--- a/mdk-stage1/rp-pppoe/man/pppoe-server.8
+++ /dev/null
@@ -1,123 +0,0 @@
-.\" $Id$ 
-.TH PPPOE-SERVER 8 "3 July 2000"
-.\""
-.UC 4
-.SH NAME
-pppoe-server \- user-space PPPoE server
-.SH SYNOPSIS
-.B pppoe-server \fR[\fIoptions\fR]
-
-.SH DESCRIPTION
-\fBpppoe-server\fR is a user-space server for PPPoE (Point-to-Point Protocol
-over Ethernet) for Linux and other UNIX systems.  \fBpppoe-server\fR works in
-concert with the \fBpppoe\fR client to respond to PPPoE discovery packets
-and set up PPPoE sessions.
-
-.SH OPTIONS
-.TP
-.B \-F
-The \fB\-F\fR option causes \fBpppoe-server\fR not to fork and become a
-daemon.  The default is to fork and become a daemon.
-
-.TP
-.B \-I \fIinterface\fR
-The \fB\-I\fR option specifies the Ethernet interface to use.  Under Linux,
-it is typically \fIeth0\fR or \fIeth1\fR.  The interface should be "up"
-before you start \fBpppoe-server\fR, but should \fInot\fR be configured to have
-an IP address.
-
-.TP
-.B \-T \fItimeout\fR
-This option is passed directly to \fBpppoe\fR; see \fBpppoe\fR(8) for
-details.
-
-.TP
-.B \-C \fIac_name\fR
-Specifies which name to report as the access concentrator name.  If not
-supplied, the host name is used.
-
-.TP
-.B \-m \fIMSS\fR
-This option is passed directly to \fBpppoe\fR; see \fBpppoe\fR(8) for
-details.
-
-.TP
-.B \-s
-This option is passed directly to \fBpppoe\fR; see \fBpppoe\fR(8) for
-details.  In addition, it causes \fBpppd\fR to be invoked with the
-\fIsync\fR option.
-
-.TP
-.B \-L \fIip\fR
-Sets the local IP address.  This is passed to spawned \fBpppd\fR processes.
-If not specified, the default is 10.0.0.1.
-
-.TP
-.B \-R \fIip\fR
-Sets the starting remote IP address.  As sessions are established,
-IP addresses are assigned starting from \fIip\fR.   \fBpppoe-server\fR
-automatically keeps track of the pool of addresses and passes a
-valid remote IP address to \fBpppd\fR.  If not specified, a starting address
-of 10.67.15.1 is used.
-
-.TP
-.B \-N \fInum\fR
-Allows at most \fInum\fR concurrent PPPoE sessions.  If not specified,
-the default is 64.
-
-.TP
-.B \-p \fIfname\fR
-Reads the specified file \fIfname\fR which is a text file consisting of
-one IP address per line.  These IP addresses will be assigned to clients.
-The number of sessions allowed will equal the number of addresses found
-in the file.  The \fB\-p\fR option overrides both \fB\-R\fR and \fB\-N\fR.
-
-.TP
-.B \-o \fIoffset\fR
-Instead of numbering PPPoE sessions starting at 1, they will be numbered
-starting at \fIoffset\fR+1.  This allows you to run multiple servers on
-a given machine; just make sure that their session numbers do not
-overlap.
-
-.TP
-.B \-f disc:sess
-The \fB\-f\fR option sets the Ethernet frame types for PPPoE discovery
-and session frames.  The types are specified as hexadecimal numbers
-separated by a colon.  Standard PPPoE uses frame types 8863:8864.
-\fIYou should not use this option\fR unless you are absolutely sure
-the peer you are dealing with uses non-standard frame types.
-
-.TP
-.B \-h
-The \fB\-h\fR option prints a brief usage message and exits.
-
-.SH OPERATION
-
-\fBpppoe-server\fR listens for incoming PPPoE discovery packets.  When
-a session is established, it spawns a \fBpppd\fR process.  The following
-options are passed to \fBpppd\fR:
-
-.nf
-nodetach noaccomp nobsdcom nodeflate nopcomp novj novjccomp
-default-asyncmap
-.fi
-
-In addition, the local and remote IP address are set based on the
-\fB\-L\fR and \fB\-R\fR options.  The \fBpty\fR option is supplied along
-with a \fBpppoe\fR command to initiate the PPPoE session.  Finally,
-additional \fBpppd\fR options can be placed in the file
-\fB/etc/ppp/pppoe-server-options\fR (which must exist, even if it is just
-empty!)
-
-Note that \fBpppoe-server\fR is meant mainly for testing PPPoE clients.
-It is \fInot\fR a high-performance server meant for production use.
-
-.SH AUTHORS
-\fBpppoe-server\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5),
-pppoe(8), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-relay(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/pppoe-sniff.8 b/mdk-stage1/rp-pppoe/man/pppoe-sniff.8
deleted file mode 100644
index 431830a22..000000000
--- a/mdk-stage1/rp-pppoe/man/pppoe-sniff.8
+++ /dev/null
@@ -1,77 +0,0 @@
-.\" $Id$ 
-.TH PPPOE-SNIFF 8 "3 July 2000"
-.\""
-.UC 4
-.SH NAME
-pppoe-sniff \- examine network for non-standard PPPoE frames
-.SH SYNOPSIS
-.B pppoe-sniff \fR[\fIoptions\fR]
-
-.SH DESCRIPTION
-\fBpppoe-sniff\fR listens for likely-looking PPPoE PADR and session frames
-and deduces extra options required for \fBpppoe(8)\fR to work.
-
-Some DSL providers seem to use non-standard frame types for PPPoE frames,
-and/or require a certain value in the Service-Name field.  It is often
-easier to sniff those values from a machine which can successfully connect
-rather than try to pry them out of the DSL provider.
-
-To use \fBpppoe-sniff\fR, you need two computers, a DSL modem and
-an Ethernet hub (\fInot\fR an Ethernet switch.)
-
-If the DSL modem normally connects directly to your computer's
-Ethernet card, connect it to the "uplink" port on the Ethernet hub.
-Plug two computers into normal ports on the hub.  On one computer, run
-whatever software the DSL provider gave you on whatever operating
-system the DSL provider supports.  On the other computer, run Linux and
-log in as root.
-
-On the Linux machine, put the Ethernet interface into promiscuous mode
-and start \fBpppoe-sniff\fR.  If the ethernet interface is \fIeth0\fR,
-for example, type these commands:
-
-.nf
-	ifconfig eth0 promisc
-	pppoe-sniff -I eth0
-.fi
-
-On the other machine, start your DSL connection as usual.  After a short
-time, \fBpppoe-sniff\fR should print recommendations for the value
-of \fBPPPOE_EXTRA\fR.  Set this value in \fB/etc/ppp/pppoe.conf\fR.
-If \fBpppoe-sniff\fR indicates that something special is required in
-\fBPPPOE_EXTRA\fR, please e-mail this to \fBpppoe@roaringpenguin.com\fR
-along with the name of your ISP and the manufacturer and model number of
-your DSL modem.  This information will be collated and provided on the
-PPPoE web page for users who do not have two computers.
-
-After \fBpppoe-sniff\fR finishes (or you stop it if it seems hung),
-remember to turn off promiscuous mode:
-
-.nf
-	ifconfig eth0 -promisc
-.fi
-
-.SH OPTIONS
-.TP
-.B \-I \fIinterface\fR
-The \fB\-I\fR option specifies the Ethernet interface to use.  Under Linux,
-it is typically \fIeth0\fR or \fIeth1\fR.  The interface should be "up"
-and in promiscuous mode before you start \fBpppoe-sniff\fR.
-
-.TP
-.B \-V
-The \fB\-V\fR option causes \fBpppoe-sniff\fR to print its version number and
-exit.
-
-.SH BUGS
-\fBpppoe-sniff\fR only works on Linux.
-
-.SH AUTHORS
-\fBpppoe-sniff\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5),
-pppoe(8), adsl-setup(8), adsl-status(8), pppoe-server(8), pppoe-relay(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/pppoe.8 b/mdk-stage1/rp-pppoe/man/pppoe.8
deleted file mode 100644
index 999c3d2ed..000000000
--- a/mdk-stage1/rp-pppoe/man/pppoe.8
+++ /dev/null
@@ -1,236 +0,0 @@
-.\" $Id$ 
-.TH PPPOE 8 "3 July 2000"
-.UC 4
-.SH NAME
-pppoe \- user-space PPPoE client.
-.SH SYNOPSIS
-.B pppd pty 'pppoe \fR[\fIpppoe_options\fR]\fB' \fR[\fIpppd_options\fR]
-.P
-.B pppoe -A \fR[\fIpppoe_options\fR]
-.SH DESCRIPTION
-\fBpppoe\fR is a user-space client for PPPoE (Point-to-Point Protocol
-over Ethernet) for Linux and other UNIX systems.  \fBpppoe\fR works in
-concert with the \fBpppd\fR PPP daemon to provide a PPP connection
-over Ethernet, as is used by many ADSL service providers.
-
-.SH OPTIONS
-.TP
-.B \-I \fIinterface\fR
-The \fB\-I\fR option specifies the Ethernet interface to use.  Under Linux,
-it is typically \fIeth0\fR or \fIeth1\fR.  The interface should be "up"
-before you start \fBpppoe\fR, but should \fInot\fR be configured to have
-an IP address.
-
-.TP
-.B \-T \fItimeout\fR
-The \fB\-T\fR option causes \fBpppoe\fR to exit if no session traffic
-is detected for \fItimeout\fR seconds.  I recommend that you use this
-option as an extra safety measure, but if you do, you should make sure
-that PPP generates enough traffic so the timeout will normally not be
-triggered.  The best way to do this is to use the
-\fIlcp-echo-interval\fR option to \fBpppd\fR.  You should set the
-PPPoE timeout to be about four times the LCP echo interval.
-
-.TP
-.B \-D \fIfile_name\fR
-The \fB\-D\fR option causes every packet to be dumped to the specified
-\fIfile_name\fR.  This is intended for debugging only; it produces huge
-amounts of output and greatly reduces performance.
-
-.TP
-.B \-V
-The \fB\-V\fR option causes \fBpppoe\fR to print its version number and
-exit.
-
-.TP
-.B \-A
-The \fB\-A\fR option causes \fBpppoe\fR to send a PADI packet and then print
-the names of access concentrators in each PADO packet it receives.  Do not
-use this option in conjunction with \fBpppd\fR; the \fB\-A\fR option is
-meant to be used interactively to give interesting information about the
-access concentrator.
-
-.TP
-.B \-S \fIservice_name\fR
-Specifies the desired service name.  \fBpppoe\fR will only initiate sessions
-with access concentrators which can provide the specified service.  In
-most cases, you should \fInot\fR specify this option.  Use it only if you
-know that there are multiple access concentrators or know that you need a
-specific service name.
-
-.TP
-.B \-C \fIac_name\fR
-Specifies the desired access concentrator name.  \fBpppoe\fR will only
-initiate sessions with the specified access concentrator.  In
-most cases, you should \fInot\fR specify this option.  Use it only if you
-know that there are multiple access concentrators.  If both the
-\fB\-S\fR and \fB\-C\fR options are specified, they must \fIboth\fR match
-for \fBpppoe\fR to initiate a session.
-
-.TP
-.B \-U
-Causes \fBpppoe\fR to use the Host-Uniq tag in its discovery packets.  This
-lets you run multiple \fBpppoe\fR daemons without having their discovery
-packets interfere with one another.  You must supply this option to
-\fIall\fR \fBpppoe\fR daemons if you intend to run multiple daemons
-simultaneously.
-
-.TP
-.B \-s
-Causes \fBpppoe\fR to use \fIsynchronous\fR PPP encapsulation.  If you
-use this option, then you \fImust\fR use the \fBsync\fR option with
-\fBpppd\fR.  You are encouraged to use this option if it works, because
-it greatly reduces the CPU overhead of \fBpppoe\fR.  However, it
-MAY be unreliable on slow machines -- there is a race condition between
-pppd writing data and pppoe reading it.  For this reason, the default
-setting is asynchronous.  If you encounter bugs or crashes with Synchronous
-PPP, turn it off -- don't e-mail me for support!
-
-.TP
-.B \-m \fIMSS\fR
-Causes \fBpppoe\fR to \fIclamp\fR the TCP maximum segment size at the specified
-value.  Because of PPPoE overhead, the maximum segment size for PPPoE is
-smaller than for normal Ethernet encapsulation.  This could cause problems
-for machines on a LAN behind a gateway using PPPoE.  If you have a LAN
-behind a gateway, and the gateway connects to the Internet using PPPoE,
-you are strongly recommended to use a \fB\-m 1412\fR option.  This avoids
-having to set the MTU on all the hosts on the LAN.
-
-.TP
-.B \-p \fIfile\fR
-Causes \fBpppoe\fR to write its process-ID to the specified file.  This
-can be used to locate and kill \fBpppoe\fR processes.
-
-.TP
-.B \-e \fIsess:mac\fR
-Causes \fBpppoe\fR to skip the discovery phase and move directly to the
-session phase.  The session is given by \fIsess\fR and the MAC address of
-the peer by \fImac\fR.  This mode is \fInot\fR meant for normal use; it
-is designed only for \fBpppoe-server\fR(8).
-
-.TP
-.B \-n
-Causes \fBpppoe\fR not to open a discovery socket.  This mode is
-\fInot\fR meant for normal use; it is designed only for
-\fBpppoe-server\fR(8).
-
-.TP
-.B \-k
-Causes \fBpppoe\fR to terminate an existing session by sending a PADT frame,
-and then exit.  You must use the \fB\-e\fR option in conjunction with this
-option to specify the session to kill.  This may be useful for killing
-sessions when a buggy peer does not realize the session has ended.
-
-.TP
-.B \-d
-Causes \fBpppoe\fR to perform discovery and then exit, after printing
-session information to standard output.  The session information is printed
-in exactly the format expected by the \fB\-e\fR option.  This option lets
-you initiate a PPPoE discovery, perform some other work, and then start
-the actual PPP session.  \fIBe careful\fR; if you use this option in a loop,
-you can create many sessions, which may annoy your peer.
-
-.TP
-.B \-f disc:sess
-The \fB\-f\fR option sets the Ethernet frame types for PPPoE discovery
-and session frames.  The types are specified as hexadecimal numbers
-separated by a colon.  Standard PPPoE uses frame types 8863:8864.
-\fIYou should not use this option\fR unless you are absolutely sure
-the peer you are dealing with uses non-standard frame types.  If your
-ISP uses non-standard frame types, complain!
-
-.TP
-.B \-h
-The \fB\-h\fR option causes \fBpppoe\fR to print usage information and
-exit.
-
-.SH PPPOE BACKGROUND
-
-PPPoE (Point-to-Point Protocol over Ethernet) is described in RFC 2516
-and is a protocol which allows the session abstraction to be maintained
-over bridged Ethernet networks.
-
-PPPoE works by encapsulating PPP frames in Ethernet frames.  The protocol
-has two distinct stages:  The \fIdiscovery\fR and the \fIsession\fR stage.
-
-In the discovery stage, the host broadcasts a special PADI (PPPoE
-Active Discovery Initiation) frame to discover any \fIaccess
-concentrators\fR.  The access concentrators (typically, only one
-access concentrator) reply with PADO (PPPoE Active Discovery Offer)
-packets, announcing their presence and the services they offer.  The
-host picks one of the access concentrators and transmits a PADR (PPPoE
-Active Discovery Request) packet, asking for a session.  The access
-concentrator replies with a PADS (PPPoE Active Discovery
-Session-Confirmation) packet.  The protocol then moves to the session stage.
-
-In the session stage, the host and access concentrator exchange PPP frames
-embedded in Ethernet frames.  The normal Ethernet MTU is 1500 bytes, but
-the PPPoE overhead plus two bytes of overhead for the encapsulated PPP
-frame mean that the MTU of the PPP interface is at most 1492 bytes.
-This causes \fIall kinds of problems\fR if you are using a Linux machine
-as a firewall and interfaces behind the firewall have an MTU greater than
-1492.  In fact, to be safe, I recommend setting the MTU of machines
-behind the firewall to 1412, to allow for worst-case TCP and IP options
-in their respective headers.
-
-Normally, PPP uses the Link Control Protocol (LCP) to shut down a PPP
-link.  However, the PPPoE specification allows the link to be shut down
-with a special PADT (PPPoE Active Discovery Terminate) packet.  This client
-recognizes this packet and will correctly terminate if a terminate request
-is received for the PPP session.
-
-.SH DESIGN GOALS
-
-My design goals for this PPPoE client were as follows, in descending order
-of importance:
-
-.TP
-.B o
-It must work.
-
-.TP
-.B o
-It must be a user-space program and not a kernel patch.
-
-.TP
-.B o
-The code must be easy to read and maintain.
-
-.TP
-.B o
-It must be fully compliant with RFC 2516, the proposed PPPoE standard.
-
-.TP
-.B o
-It must never hang up forever -- if the connection is broken, it must
-detect this and exit, allowing a wrapper script to restart the connection.
-
-.TP
-.B o
-It must be fairly efficient.
-
-.P
-I believe I have achieved all of these goals, but (of course) am open
-to suggestions, patches and ideas.  See my home page,
-http://www.roaringpenguin.com, for contact information.
-
-.SH NOTES
-
-For best results, you must give \fBpppd\fR an mtu option of
-1492.  I have observed problems with excessively-large frames
-unless I set this option.  Also, if \fBpppoe\fR is running on a firewall
-machine, all machines behind the firewall should have MTU's of 1412.
-
-If you have problems, check your system logs.  \fBpppoe\fR logs interesting
-things to syslog.  You may have to turn on logging of \fIdebug\fR-level
-messages for complete diagnosis.
-
-.SH AUTHORS
-\fBpppoe\fR was written by David F. Skoll <dfs@roaringpenguin.com>,
-with much inspiration from an earlier version by Luke Stras.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-server(8), pppoe-relay(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/pppoe.conf.5 b/mdk-stage1/rp-pppoe/man/pppoe.conf.5
deleted file mode 100644
index 731fd98d4..000000000
--- a/mdk-stage1/rp-pppoe/man/pppoe.conf.5
+++ /dev/null
@@ -1,168 +0,0 @@
-.\" $Id$
-.\""
-.TH PPPOE.CONF 5 "21 February 2000"
-.UC 4
-.SH NAME
-pppoe.conf \- Configuration file used by \fBadsl-start\fR(8),
-\fBadsl-stop\fR(8), \fBadsl-status(8)\fR and \fBadsl-connect\fR(8).
-
-.SH DESCRIPTION
-\fB/etc/ppp/pppoe.conf\fR is a shell script which contains configuration
-information for Roaring Penguin's ADSL scripts.  Note that \fBpppoe.conf\fR
-is used only by the various adsl-* shell scripts, not by \fBpppoe\fR
-itself.
-
-\fBpppoe.conf\fR consists of a sequence of shell variable assignments.
-The variables and their meanings are:
-
-.TP
-.B ETH
-The Ethernet interface connected to the ADSL modem (for example, eth0).
-
-.TP
-.B USER
-The ADSL user-id (for example, b1xxnxnx@sympatico.ca).
-
-.TP
-.B SERVICENAME
-If this is not blank, then it is passed with the \fB\-S\fR option to
-\fBpppoe\fR.  It specifies a service name to ask for.  Usually, you
-should leave it blank.
-
-.TP
-.B ACNAME
-If this is not blank, then it is passed with the \fB\-C\fR option to
-\fBpppoe\fR.  It specifies the name of the access concentrator to connect
-to.  Usually, you should leave it blank.
-
-.TP
-.B DEMAND
-If set to a number, the link is activated on demand and brought down
-after after \fBDEMAND\fR seconds.  If set to \fBno\fR, the link is kept
-up all the time rather than being activated on demand.
-
-.TP
-.B DNSTYPE
-One of \fBNOCHANGE\fR, \fBSPECIFY\fR or \fBSERVER\fR.  If
-set to NOCHANGE, \fBadsl-connect\fR will not adjust the DNS setup in
-any way.  If set to SPECIFY, it will re-write /etc/resolv.conf with
-the values of DNS1 and DNS2.  If set to \fBSERVER\fR, it will
-supply the \fIusepeerdns\fR option to \fBpppd\fR, and make a symlink
-from /etc/resolv.conf to /etc/ppp/resolv.conf.
-
-.TP
-.B DNS1, DNS2
-IP addresses of DNS servers if you use DNSTYPE=SPECIFY.
-
-.TP
-.B NONROOT
-If the line \fBNONROOT=OK\fR (exactly like that; no whitespace or comments)
-appears in the configuration file, then \fBpppoe-wrapper\fR will allow
-non-root users to bring the conneciton up or down.  The wrapper is installed
-only if you installed the rp-pppoe-gui package.
-
-.TP
-.B USEPEERDNS
-If set to "yes", then \fBadsl-connect\fR will supply the \fIusepeerdns\fR
-option to \fBpppd\fR, which causes it to obtain DNS server addresses
-from the peer and create a new \fB/etc/resolv.conf\fR file.  Otherwise,
-\fBadsl-connect\fR will not supply this option, and \fBpppd\fR will not
-modify \fB/etc/resolv.conf\fR.
-
-.TP
-.B CONNECT_POLL
-How often (in seconds) \fBadsl-start\fR should check to see if a new PPP
-interface has come up.  If this is set to 0, the \fBadsl-start\fR simply
-initiates the PPP session, but does not wait to see if it comes up
-successfully.
-
-.TP
-.B CONNECT_TIMEOUT
-How long (in seconds) \fBadsl-start\fR should wait for a new PPP interface
-to come up before concluding that \fBadsl-connect\fR has failed and killing
-the session.
-
-.TP
-.B PING
-A character which is echoed every \fBCONNECT_POLL\fR seconds while
-\fBadsl-start\fR is waiting for the PPP interface to come up.
-
-.TP
-.B FORCEPING
-A character which is echoed every \fBCONNECT_POLL\fR seconds while
-\fBadsl-start\fR is waiting for the PPP interface to come up.  Similar
-to \fBPING\fR, but the character is echoed even if \fBadsl-start\fR's
-standard output is not a tty.
-
-.TP
-.B PIDFILE
-A file in which to write the process-ID of the adsl-connect process
-(for example, \fB/var/run/pppoe.pid\fR).  Two additional files
-($PIDFILE.pppd and $PIDFILE.pppoe) hold the process-ID's of the
-\fBpppd\fR and \fBpppoe\fR processes, respectively.
-
-.TP
-.B SYNCHRONOUS
-An indication of whether or not to use synchronous PPP (\fByes\fR or
-\fBno\fR).  Synchronous PPP is safe on Linux machines with the n_hdlc
-line discipline.  (If you have a file called "n_hdlc.o" in your
-modules directory, you have the line discipline.)  It is \fInot
-recommended\fR on other machines or on Linux machines without the
-n_hdlc line discipline due to some known and unsolveable race
-conditions in a user-mode client.
-
-.TP
-.B CLAMPMSS
-The value at which to "clamp" the advertised MSS for TCP sessions.  The
-default of 1412 should be fine.
-
-.TP
-.B LCP_INTERVAL
-How often (in seconds) \fBpppd\fR sends out LCP echo-request packets.
-
-.TP
-.B LCP_FAILURE
-How many unanswered LCP echo-requests must occur before \fBpppd\fR
-concludes the link is dead.
-
-.TP
-.B PPPOE_TIMEOUT
-If this many seconds elapse without any activity seen by \fBpppoe\fR,
-then \fBpppoe\fR exits.
-
-.TP
-.B FIREWALL
-One of NONE, STANDALONE or MASQUERADE.  If NONE, then \fBadsl-connect\fR does
-not add any firewall rules.  If STANDALONE, then it clears existing firewall
-rules and sets up basic rules for a standalone machine.  If MASQUERADE, then
-it clears existing firewall rules and sets up basic rules for an Internet
-gateway.  If you run services on your machine, these simple firewall scripts
-are inadequate; you'll have to make your own firewall rules and set FIREWALL
-to NONE.
-
-.TP
-.B PPPOE_EXTRA
-Any extra arguments to pass to \fBpppoe\fR
-
-.TP
-.B PPPD_EXTRA
-Any extra arguments to pass to \fBpppd\fR
-
-.TP
-.B LINUX_PLUGIN
-If non-blank, the full path of the Linux kernel-mode PPPoE plugin
-(typically \fB/etc/ppp/plugins/rp-pppoe.so\fR.)  This forces
-\fBadsl-connect\fR to use kernel-mode PPPoE on Linux 2.4.x systems.
-This code is experimental and unsupported.  Use of the plugin causes
-\fBadsl-connect\fR to ignore CLAMPMSS, PPPOE_EXTRA, SYNCHRONOUS and
-PPPOE_TIMEOUT.
-
-.P
-By using different configuration files with different PIDFILE
-settings, you can manage multiple PPPoE connections.  Just specify the
-configuration file as an argument to \fBadsl-start\fR and \fBadsl-stop\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-connect(8), adsl-start(8), adsl-stop(8), pppd(8), adsl-setup(8),
-pppoe-wrapper(8)
-
diff --git a/mdk-stage1/rp-pppoe/rp-pppoe-gui.spec b/mdk-stage1/rp-pppoe/rp-pppoe-gui.spec
deleted file mode 100644
index 3222a602e..000000000
--- a/mdk-stage1/rp-pppoe/rp-pppoe-gui.spec
+++ /dev/null
@@ -1,98 +0,0 @@
-Summary: PPP Over Ethernet (xDSL support)
-Name: rp-pppoe-gui
-Version: 3.0
-%if %(%{expand:test %{_vendor} != mandrake ; echo $?})
-Release: 1mdk
-%else
-Release: 1
-%endif
-Copyright: GPL
-Group: System Environment/Daemons
-Source: http://www.roaringpenguin.com/pppoe/rp-pppoe-3.0.tar.gz
-Url: http://www.roaringpenguin.com/pppoe/
-Packager: David F. Skoll <dfs@roaringpenguin.com>
-BuildRoot: /tmp/pppoe-build
-Vendor: Roaring Penguin Software Inc.
-Requires: ppp >= 2.3.7
-Requires: rp-pppoe >= 3.0
-
-%description
-This is a graphical wrapper around the rp-pppoe PPPoE client.  PPPoE is
-a protocol used by many DSL Internet Service Providers.
-
-%prep
-umask 022
-mkdir -p $RPM_BUILD_ROOT
-cd $RPM_BUILD_ROOT
-rm -rf $RPM_BUILD_ROOT/rp-pppoe-%{version}
-zcat $RPM_SOURCE_DIR/rp-pppoe-%{version}.tar.gz | tar xvf -
-cd $RPM_BUILD_ROOT/rp-pppoe-%{version}/src
-./configure --mandir=%{_mandir}
-
-%build
-cd $RPM_BUILD_ROOT/rp-pppoe-%{version}/gui
-make
-
-%install
-cd $RPM_BUILD_ROOT/rp-pppoe-%{version}/gui
-make install RPM_INSTALL_ROOT=$RPM_BUILD_ROOT
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%post
-# Install entry in KDE menu
-if test -n "$KDEDIR" ; then
-    mkdir -p "$KDEDIR/share/applnk/Internet"
-    cat <<EOF > "$KDEDIR/share/applnk/Internet/tkpppoe.kdelnk"
-# KDE Config File
-[KDE Desktop Entry]
-Name=TkPPPoE
-Comment=Start/Stop ADSL connections
-Exec=tkpppoe
-Terminal=0
-Type=Application
-EOF
-fi
-
-# Install entry in GNOME menus
-GNOMEDIR=`gnome-config --datadir 2>/dev/null`
-if test -n "$GNOMEDIR" ; then
-    mkdir -p "$GNOMEDIR/gnome/apps/Internet"
-cat <<EOF > "$GNOMEDIR/gnome/apps/Internet/tkpppoe.desktop"
-[Desktop Entry]
-Name=TkPPPoE
-Comment=Start/Stop ADSL connections
-Exec=tkpppoe
-Terminal=0
-Type=Application
-EOF
-fi
-
-%postun
-# Remove KDE menu entry
-if test -n "$KDEDIR" ; then
-    rm -f "$KDEDIR/share/applnk/Internet/tkpppoe.kdelnk"
-fi
-
-# Remove GNOME menu entry
-GNOMEDIR=`gnome-config --datadir 2>/dev/null`
-if test -n "$GNOMEDIR" ; then
-    rm -f "$GNOMEDIR/gnome/apps/Internet/tkpppoe.desktop"
-fi
-
-%files
-%defattr(-,root,root)
-%dir /etc/ppp/rp-pppoe-gui
-/usr/sbin/pppoe-wrapper
-/usr/bin/tkpppoe
-%{_mandir}/man1/tkpppoe.1*
-%{_mandir}/man1/pppoe-wrapper.1*
-/usr/share/rp-pppoe-gui/tkpppoe.html
-/usr/share/rp-pppoe-gui/mainwin-busy.png
-/usr/share/rp-pppoe-gui/mainwin-nonroot.png
-/usr/share/rp-pppoe-gui/mainwin.png
-/usr/share/rp-pppoe-gui/props-advanced.png
-/usr/share/rp-pppoe-gui/props-basic.png
-/usr/share/rp-pppoe-gui/props-nic.png
-/usr/share/rp-pppoe-gui/props-options.png
diff --git a/mdk-stage1/rp-pppoe/rp-pppoe.spec b/mdk-stage1/rp-pppoe/rp-pppoe.spec
deleted file mode 100644
index 622e3bb80..000000000
--- a/mdk-stage1/rp-pppoe/rp-pppoe.spec
+++ /dev/null
@@ -1,71 +0,0 @@
-Summary: PPP Over Ethernet (xDSL support)
-Name: rp-pppoe
-Version: 3.0
-%if %(%{expand:test %{_vendor} != mandrake ; echo $?})
-Release: 1mdk
-%else
-Release: 1
-%endif
-Copyright: GPL
-Group: System Environment/Daemons
-Source: http://www.roaringpenguin.com/pppoe/rp-pppoe-3.0.tar.gz
-Url: http://www.roaringpenguin.com/pppoe/
-Packager: David F. Skoll <dfs@roaringpenguin.com>
-BuildRoot: /tmp/pppoe-build
-Vendor: Roaring Penguin Software Inc.
-Requires: ppp >= 2.3.7
-
-%description
-PPPoE (Point-to-Point Protocol over Ethernet) is a protocol used by
-many ADSL Internet Service Providers. Roaring Penguin has a free
-client for Linux systems to connect to PPPoE service providers.
-
-The client is a user-mode program and does not require any kernel
-modifications. It is fully compliant with RFC 2516, the official PPPoE
-specification.
-
-%prep
-%setup
-cd src
-./configure --mandir=%{_mandir}
-
-%build
-cd src
-make
-
-%install
-cd src
-make install RPM_INSTALL_ROOT=$RPM_BUILD_ROOT
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%files
-%defattr(-,root,root)
-%doc doc/CHANGES doc/HOW-TO-CONNECT doc/LICENSE doc/KERNEL-MODE-PPPOE README
-%config /etc/ppp/pppoe.conf
-%config /etc/ppp/pppoe-server-options
-%config /etc/ppp/firewall-masq
-%config /etc/ppp/firewall-standalone
-/etc/ppp/plugins/*
-/usr/sbin/pppoe
-/usr/sbin/pppoe-server
-/usr/sbin/pppoe-sniff
-/usr/sbin/pppoe-relay
-/usr/sbin/adsl-connect
-/usr/sbin/adsl-start
-/usr/sbin/adsl-stop
-/usr/sbin/adsl-setup
-/usr/sbin/adsl-status
-%{_mandir}/man5/pppoe.conf.5*
-%{_mandir}/man8/pppoe.8*
-%{_mandir}/man8/pppoe-server.8*
-%{_mandir}/man8/pppoe-relay.8*
-%{_mandir}/man8/pppoe-sniff.8*
-%{_mandir}/man8/adsl-connect.8*
-%{_mandir}/man8/adsl-start.8*
-%{_mandir}/man8/adsl-stop.8*
-%{_mandir}/man8/adsl-status.8*
-%{_mandir}/man8/adsl-setup.8*
-/etc/rc.d/init.d/adsl
-
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-connect.in b/mdk-stage1/rp-pppoe/scripts/adsl-connect.in
deleted file mode 100755
index 85dfb3d8d..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-connect.in
+++ /dev/null
@@ -1,278 +0,0 @@
-#!/bin/sh
-# @configure_input@
-#***********************************************************************
-#
-# adsl-connect
-#
-# Shell script to connect to an ADSL provider using PPPoE
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-connect [config_file]
-#        adsl-connect interface user [config_file]
-# Second form overrides USER and ETH from config file.
-# If config_file is omitted, defaults to /etc//ppp/pppoe.conf
-#
-#***********************************************************************
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-localstatedir=/var
-
-# Paths to programs
-IFCONFIG=/sbin/ifconfig
-PPPD=@PPPD@
-SETSID=@SETSID@
-PPPOE=@sbindir@/pppoe
-LOGGER="/usr/bin/logger -t `basename $0`"
-
-# Must be root
-if test "`@ID@ -u`" != 0 ; then
-    echo "$0: You must be root to run this script" >& 2
-    exit 1
-fi
-
-if test "$SETSID" != "" -a ! -x "$SETSID"; then
-    SETSID=""
-fi
-
-CONFIG=/etc//ppp/pppoe.conf
-USER=""
-ETH=""
-
-# Sort out command-line arguments
-case "$#" in
-    1)
-	CONFIG="$1"
-	;;
-    3)
-	CONFIG="$3"
-	;;
-esac
-
-if test ! -f "$CONFIG" -o ! -r "$CONFIG" ; then
-    echo "$0: Cannot read configuration file '$CONFIG'" >& 2
-    exit 1
-fi
-
-. $CONFIG
-
-PPPOE_PIDFILE="$PIDFILE.pppoe"
-PPPD_PIDFILE="$PIDFILE.pppd"
-
-# Check for command-line overriding of ETH and USER
-case "$#" in
-    2|3)
-	ETH="$1"
-	USER="$2"
-	;;
-esac
-
-# Check that config file is sane
-if test "$USER" = "" ; then
-    echo "$0: Check '$CONFIG' -- no setting for USER" >& 2
-    exit 1
-fi
-if test "$ETH" = "" ; then
-    echo "$0: Check '$CONFIG' -- no setting for ETH" >& 2
-    exit 1
-fi
-
-PPPD_PID=0
-
-# Catch common error
-if test "$DEBUG" = "1" ; then
-    echo "*** If you want to use DEBUG, invoke adsl-start, not adsl-connect."
-    exit 1
-fi
-
-if test "$DEBUG" != "" ; then
-    if test "$LINUX_PLUGIN" != "" ; then
-	echo "Cannot use DEBUG mode and LINUX_PLUGIN at the same time."
-	echo "Kernel-mode PPPoE is experimental and unsupported."
-	exit 1
-    fi
-    echo "* The following section identifies your Ethernet interface" >> $DEBUG
-    echo "* and user name.  Some ISP's need 'username'; others" >> $DEBUG
-    echo "* need 'username@isp.com'.  Try both" >> $DEBUG
-    echo "ETH=$ETH; USER=$USER" >> $DEBUG
-    echo "---------------------------------------------" >> $DEBUG
-fi
-
-# MTU of Ethernet card attached to modem MUST be 1500.  This apparently
-# fails on some *BSD's, so we'll only do it under Linux
-
-if test `uname -s` = Linux ; then
-    $IFCONFIG $ETH up mtu 1500
-    # For 2.4 kernels.  Will fail on 2.2.x, but who cares?
-    modprobe ppp_generic > /dev/null 2>&1
-    modprobe ppp_async > /dev/null 2>&1
-    modprobe ppp_synctty > /dev/null 2>&1
-    if test -n "$LINUX_PLUGIN" ; then
-	modprobe pppox > /dev/null 2>&1
-	modprobe pppoe > /dev/null 2>&1
-    fi
-fi
-
-if test "$SYNCHRONOUS" = "yes" ; then
-	PPPOE_SYNC=-s
-	PPPD_SYNC=sync
-	# Increase the chances of it working on Linux...
-	if test `uname -s` = Linux ; then
-	    modprobe n_hdlc > /dev/null 2>&1
-	fi
-else
-	PPPOE_SYNC=""
-	PPPD_SYNC=""
-fi
-
-if test -n "$ACNAME" ; then
-    ACNAME="-C $ACNAME"
-fi
-
-if test -n "$SERVICENAME" ; then
-    SERVICENAME="-S $SERVICENAME"
-fi
-
-if test "$CLAMPMSS" = "no" ; then
-	CLAMPMSS=""
-else
-	CLAMPMSS="-m $CLAMPMSS"
-fi
-
-# If DNSTYPE is SERVER, we must use "usepeerdns" option to pppd.
-if test "$DNSTYPE" = "SERVER" ; then
-	USEPEERDNS=yes
-fi
-
-if test "$USEPEERDNS" = "yes" ; then
-	USEPEERDNS="usepeerdns"
-else
-	USEPEERDNS=""
-fi
-
-# Backward config file compatibility
-if test "$DEMAND" = "" ; then
-	DEMAND=no
-fi
-
-if test "$DEMAND" = "no" ; then
-	DEMAND=""
-else
-	DEMAND="demand persist idle $DEMAND 10.112.112.112:10.112.112.113 ipcp-accept-remote ipcp-accept-local connect true noipdefault ktune"
-fi
-
-case "$FIREWALL" in
-    STANDALONE)
-	. /etc/ppp/firewall-standalone
-	;;
-    MASQUERADE)
-	. /etc/ppp/firewall-masq
-	;;
-esac
-
-# If we're using kernel-mode PPPoE on Linux...
-if test "$LINUX_PLUGIN" != "" ; then
-    PLUGIN_OPTS="plugin $LINUX_PLUGIN $ETH"
-    modprobe pppoe > /dev/null 2>&1
-fi
-
-# Standard PPP options we always use
-PPP_STD_OPTIONS="$PLUGIN_OPTS noipdefault noauth default-asyncmap defaultroute hide-password nodetach $USEPEERDNS local mtu 1492 mru 1492 noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp user $USER lcp-echo-interval $LCP_INTERVAL lcp-echo-failure $LCP_FAILURE $PPPD_EXTRA"
-
-# Jigger DNS if required...
-if test "$DNSTYPE" = "SERVER" ; then
-    # Sorry, dude...
-    rm -f /etc/resolv.conf
-    ln -s /etc/ppp/resolv.conf /etc/resolv.conf
-elif test "$DNSTYPE" = "SPECIFY" ; then
-    # Sorry, dude...
-    rm -f /etc/resolv.conf
-    echo "nameserver $DNS1" > /etc/resolv.conf
-    if test -n "$DNS2" ; then
-	echo "nameserver $DNS2" >> /etc/resolv.conf
-    fi
-fi
-
-# PPPoE invocation
-PPPOE_CMD="$PPPOE -p $PPPOE_PIDFILE -I $ETH -T $PPPOE_TIMEOUT -U $PPPOE_SYNC $CLAMPMSS $ACNAME $SERVICENAME $PPPOE_EXTRA"
-if test "$DEBUG" != "" ; then
-    if test "$DEMAND" != "" ; then
-	echo "(Turning off DEMAND for debugging purposes)"
-	DEMAND=""
-    fi
-    echo "* The following section shows the pppd command we will invoke" >> $DEBUG
-    echo "pppd invocation" >> $DEBUG
-    echo "$SETSID $PPPD pty '$PPPOE_CMD' $PPP_STD_OPTIONS $PPPD_SYNC debug" >> $DEBUG
-    echo "---------------------------------------------" >> $DEBUG
-    $SETSID $PPPD pty "$PPPOE_CMD -D $DEBUG-0" \
-	$PPP_STD_OPTIONS \
-	$PPPD_SYNC \
-	debug >> $DEBUG 2>&1
-    echo "---------------------------------------------" >> $DEBUG
-    echo "* The following section is an extract from your log." >> $DEBUG
-    echo "* Look for error messages from pppd, such as" >> $DEBUG
-    echo "* a lack of kernel support for PPP, authentication failure" >> $DEBUG
-    echo "* etc." >> $DEBUG
-    echo "Extract from /var/log/messages" >> $DEBUG
-    grep 'ppp' /var/log/messages | tail -150 >> $DEBUG
-    date >> $DEBUG
-    echo "---------------------------------------------" >> $DEBUG
-    echo "* The following section is a dump of the packets" >> $DEBUG
-    echo "* sent and received by rp-pppoe.  If you don't see" >> $DEBUG
-    echo "* any output, it's an Ethernet driver problem.  If you only" >> $DEBUG
-    echo "* see three PADI packets and nothing else, check your cables" >> $DEBUG
-    echo "* and modem.  Make sure the modem lights flash when you try" >> $DEBUG
-    echo "* to connect.  Check that your Ethernet card is in" >> $DEBUG
-    echo "* half-duplex, 10Mb/s mode.  If all else fails," >> $DEBUG
-    echo "* try using pppoe-sniff." >> $DEBUG
-    echo "rp-pppoe debugging dump" >> $DEBUG
-    cat $DEBUG-0 >> $DEBUG
-    rm -f $DEBUG-0
-    for i in 1 2 3 4 5 6 7 8 9 10 ; do
-    echo ""
-    echo ""
-    echo ""
-    done
-    echo "*** Finished debugging run.  Please review the file"
-    echo "*** '$DEBUG' and try to"
-    echo "*** figure out what is going on."
-    echo "***"
-    echo "*** Unfortunately, we can NO LONGER accept debugging"
-    echo "*** output for analysis.  Please do not send this to"
-    echo "*** Roaring Penguin; it is too time-consuming for"
-    echo "*** us to deal with all the analyses we have been sent."
-    exit 0
-fi
-
-echo $$ > $PIDFILE
-
-while [ true ] ; do
-    if test "$LINUX_PLUGIN" != "" ; then
-	$SETSID $PPPD $PPP_STD_OPTIONS $DEMAND &
-	echo "$!" > $PPPD_PIDFILE
-    else
-	$SETSID $PPPD pty "$PPPOE_CMD" \
-	    $PPP_STD_OPTIONS \
-	    $DEMAND \
-	    $PPPD_SYNC &
-	echo "$!" > $PPPD_PIDFILE
-    fi
-    wait
-
-    # Run /etc/ppp/adsl-lost if it exists
-    test -x /etc/ppp/adsl-lost && /etc/ppp/adsl-lost
-
-    # Re-establish the connection
-    $LOGGER -p daemon.notice \
-        "ADSL connection lost; attempting re-connection."
-
-    # Wait a bit in case a problem causes tons of log messages :-)
-    sleep 5
-done
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in b/mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in
deleted file mode 100755
index 936f5fba7..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/bin/sh
-#
-# adsl                     This script starts or stops an ADSL connection
-#
-# chkconfig: 2345 99 01
-# description: Connects to ADSL provider
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.  This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-# Modifed to work with SuSE 6.4 linux by Gary Cameron.
-#
-# Source function library.
-#. /etc/rc.d/init.d/functions  # For red hat?
-. /etc/rc.config               # For SuSE, enables setting from /etc/rc.config
-
-#Tweak this
-restart_time=120
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-START=@sbindir@/adsl-start
-STOP=@sbindir@/adsl-stop
-STATUS=@sbindir@/adsl-status
-
-test "$ADSL_START" = "yes" || exit 0
-
-# The echo return value for success (defined in /etc/rc.config).
-return=$rc_done
-case "$1" in
-    start)
-        echo -n "Bringing up ADSL link"
-        $START  > /dev/null 2>&1 || return=$rc_failed
-        echo -e "$return"
-        ;;
-
-    stop)
-        echo -n "Shutting down ADSL link"
-        $STOP > /dev/null 2>&1 || return=$rc_failed
-        echo -e "$return"
-        ;;
-
-    restart)
-        $0 stop
-        echo "Waiting" $restart_time "seconds for the host to reset itself"
-        sleep $restart_time  #Note: Need time for host to reset itself
-        $0 start
-        ;;
-
-    status)
-        $STATUS
-        ;;
-
-    *)
-        echo "Usage: adsl {start|stop|restart|status}"
-        exit 1
-esac
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in b/mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in
deleted file mode 100755
index 3b22f1345..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/bin/sh
-#
-# adsl                     This script starts or stops an ADSL connection
-#
-# chkconfig: 2345 99 01
-# description: Connects to ADSL provider
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.  This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-
-# Source function library if it exists
-test -r /etc/rc.d/init.d/functions && . /etc/rc.d/init.d/functions
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-START=@sbindir@/adsl-start
-STOP=@sbindir@/adsl-stop
-STATUS=@sbindir@/adsl-status
-case "$1" in
-    start)
-        echo -n "Bringing up ADSL link: "
-
-	$START
-	if [ $? = 0 ] ; then
-		echo success
-		touch /var/lock/subsys/adsl
-	else
-		echo failure
-	fi
-        ;;
-
-    stop)
-        echo -n "Shutting down ADSL link: "
-
-	$STOP > /dev/null 2>&1
-	if [ $? = 0 ] ; then
-		echo success
-		rm -f /var/lock/subsys/adsl
-	else
-		echo failure
-	fi
-        ;;
-
-    restart)
-	$0 stop
-	$0 start
-	;;
-
-    status)
-	$STATUS
-	;;
-
-    *)
-        echo "Usage: adsl {start|stop|restart|status}"
-        exit 1
-esac
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-init.in b/mdk-stage1/rp-pppoe/scripts/adsl-init.in
deleted file mode 100755
index ab9146fd3..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-init.in
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/sh
-#
-# adsl                     This script starts or stops an ADSL connection
-#
-# chkconfig: 2345 99 01
-# description: Connects to ADSL provider
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.  This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-
-# Source function library if it exists
-test -r /etc/rc.d/init.d/functions && . /etc/rc.d/init.d/functions
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-START=@sbindir@/adsl-start
-STOP=@sbindir@/adsl-stop
-STATUS=@sbindir@/adsl-status
-case "$1" in
-    start)
-        echo -n "Bringing up ADSL link"
-
-	$START
-	if [ $? = 0 ] ; then
-		touch /var/lock/subsys/adsl
-	        echo_success
-	else
-		echo_failure
-	fi
-        echo ""
-        ;;
-
-    stop)
-        echo -n "Shutting down ADSL link"
-
-	$STOP > /dev/null 2>&1
-	if [ $? = 0 ] ; then
-		rm -f /var/lock/subsys/adsl
-	        echo_success
-	else
-		echo_failure
-	fi
-        echo ""
-        ;;
-
-    restart)
-	$0 stop
-	$0 start
-	;;
-
-    status)
-	$STATUS
-	;;
-
-    *)
-        echo "Usage: adsl {start|stop|restart|status}"
-        exit 1
-esac
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-setup.in b/mdk-stage1/rp-pppoe/scripts/adsl-setup.in
deleted file mode 100755
index a8c7fa039..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-setup.in
+++ /dev/null
@@ -1,346 +0,0 @@
-#!/bin/sh
-#***********************************************************************
-#
-# adsl-setup
-#
-# All-purpose slicing/dicing shell script to configure rp-pppoe.
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#***********************************************************************
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-IFCONFIG=/sbin/ifconfig
-PPPD=@PPPD@
-PPPOE=@sbindir@/pppoe
-ECHO=@ECHO@
-LOGGER="/usr/bin/logger -t `basename $0`"
-
-CONFIG=/etc/ppp/pppoe.conf
-
-# Protect created files
-umask 077
-
-copy() {
-    cp $1 $2
-    if [ "$?" != 0 ] ; then
-	$ECHO "*** Error copying $1 to $2"
-	$ECHO "*** Quitting."
-	exit 1
-    fi
-}
-
-$ECHO "Welcome to the Roaring Penguin ADSL client setup.  First, I will run"
-$ECHO "some checks on your system to make sure the PPPoE client is installed"
-$ECHO "properly..."
-$ECHO ""
-
-# Must be root
-if [ "`@ID@ -u`" != 0 ] ; then
-    $ECHO "$0: Sorry, you must be root to run this script"
-    exit 1
-fi
-
-# Prototype config file must exist
-if [ ! -r "$CONFIG" ] ; then
-    $ECHO "Oh, dear, I don't see the file '$CONFIG' anywhere.  Please"
-    $ECHO "re-install the PPPoE client."
-    exit 1
-fi
-
-# Must have pppd
-if [ ! -x $PPPD ] ; then
-    $ECHO "Oops, I can't execute the program '$PPPD'.  You"
-    $ECHO "must install the PPP software suite, version 2.3.10 or later."
-    exit 1
-fi
-
-. $CONFIG
-
-if [ "$DEMAND" = "" ] ; then
-    DEMAND=no
-fi
-
-# pppoe must exist
-if [ ! -x "$PPPOE" ] ; then
-    $ECHO "Oh, dear, I can't execute the program '$PPPOE'.  Please"
-    $ECHO "re-install the rp-pppoe client."
-    exit 1
-fi
-
-$ECHO "Looks good!  Now, please enter some information:"
-
-while [ true ] ; do
-    $ECHO ""
-    $ECHO "USER NAME"
-    $ECHO ""
-    $ECHO -n ">>> Enter your PPPoE user name (default $USER): "
-    read U
-
-    if [ "$U" = "" ] ; then
-	U="$USER"
-    fi
-
-    # Under Linux, "fix" the default interface if eth1 is not available
-    if test `uname -s` = "Linux" ; then
-	$IFCONFIG $ETH > /dev/null 2>&1 || ETH=eth0
-    fi
-    $ECHO ""
-    $ECHO "INTERFACE"
-    $ECHO ""
-    $ECHO ">>> Enter the Ethernet interface connected to the ADSL modem"
-    $ECHO "For Solaris, this is likely to be something like /dev/hme0."
-    $ECHO "For Linux, it will be ethn, where 'n' is a number."
-    $ECHO -n "(default $ETH): "
-    read E
-
-    if [ "$E" = "" ] ; then
-	E="$ETH"
-    fi
-
-    $ECHO ""
-    $ECHO "Do you want the link to come up on demand, or stay up continuously?"
-    $ECHO "If you want it to come up on demand, enter the idle time in seconds"
-    $ECHO "after which the link should be dropped.  If you want the link to"
-    $ECHO "stay up permanently, enter 'no' (two letters, lower-case.)"
-    $ECHO "NOTE: Demand-activated links do not interact well with dynamic IP"
-    $ECHO "addresses.  You may have some problems with demand-activated links."
-    $ECHO -n ">>> Enter the demand value (default $DEMAND): "
-    read D
-    if [ "$D" = "" ] ; then
-	D=$DEMAND
-    fi
-
-    $ECHO ""
-    $ECHO "DNS"
-    $ECHO ""
-    $ECHO "Please enter the IP address of your ISP's primary DNS server."
-    $ECHO "If your ISP claims that 'the server will provide DNS addresses',"
-    $ECHO "enter 'server' (all lower-case) here."
-    $ECHO "If you just press enter, I will assume you know what you are"
-    $ECHO "doing and not modify your DNS setup."
-    $ECHO -n ">>> Enter the DNS information here: "
-
-    read DNS1
-
-
-    if [ "$DNS1" != "" ] ; then
-        if [ "$DNS1" != "server" ] ; then
-	    $ECHO "Please enter the IP address of your ISP's secondary DNS server."
-	    $ECHO "If you just press enter, I will assume there is only one DNS server."
-	    $ECHO -n ">>> Enter the secondary DNS server address here: "
-	    read DNS2
-	fi
-    fi
-
-    while [ true ] ; do
-	$ECHO ""
-	$ECHO "PASSWORD"
-	$ECHO ""
-	stty -echo
-	$ECHO -n ">>> Please enter your PPPoE password:    "
-	read PWD1
-	$ECHO ""
-	$ECHO -n ">>> Please re-enter your PPPoE password: "
-	read PWD2
-	$ECHO ""
-	stty echo
-	if [ "$PWD1" = "$PWD2" ] ; then
-	    break
-	fi
-
-	$ECHO -n ">>> Sorry, the passwords do not match.  Try again? (y/n)"
-	read ANS
-	case "$ANS" in
-	    N|No|NO|Non|n|no|non)
-		$ECHO "OK, quitting.  Bye."
-		exit 1
-	esac
-    done
-
-    # Firewalling
-    $ECHO ""
-    $ECHO "FIREWALLING"
-    $ECHO ""
-    if test `uname -s` != "Linux" ; then
-	$ECHO "Sorry, firewalling is only supported under Linux.  Consult"
-	$ECHO "your operating system manuals for details on setting up"
-	$ECHO "packet filters for your system."
-	FIREWALL=NONE
-    else
-	$ECHO "Please choose the firewall rules to use.  Note that these rules are"
-	$ECHO "very basic.  You are strongly encouraged to use a more sophisticated"
-	$ECHO "firewall setup; however, these will provide basic security.  If you"
-	$ECHO "are running any servers on your machine, you must choose 'NONE' and"
-	$ECHO "set up firewalling yourself.  Otherwise, the firewall rules will deny"
-	$ECHO "access to all standard servers like Web, e-mail, ftp, etc.  If you"
-	$ECHO "are using SSH, the rules will block outgoing SSH connections which"
-	$ECHO "allocate a privileged source port."
-	$ECHO ""
-	while [ true ] ; do
-	    $ECHO "The firewall choices are:"
-	    $ECHO "0 - NONE: This script will not set any firewall rules.  You are responsible"
-	    $ECHO "          for ensuring the security of your machine.  You are STRONGLY"
-	    $ECHO "          recommended to use some kind of firewall rules."
-	    $ECHO "1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation"
-	    $ECHO "2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway"
-	    $ECHO "                for a LAN"
-	    $ECHO -n ">>> Choose a type of firewall (0-2): "
-	    read a
-	    if [ "$a" = 0 -o "$a" = 1 -o "$a" = 2 ] ; then
-		break
-	    fi
-	    $ECHO "Please enter a number from 0 to 2"
-	done
-
-	case "$a" in
-	    0)
-		FIREWALL=NONE
-		;;
-	    1)
-		FIREWALL=STANDALONE
-		;;
-	    2)
-		FIREWALL=MASQUERADE
-		;;
-	esac
-    fi
-
-    $ECHO ""
-    $ECHO "** Summary of what you entered **"
-    $ECHO ""
-    $ECHO "Ethernet Interface: $E"
-    $ECHO "User name:          $U"
-    if [ "$D" = "no" ] ; then
-	$ECHO "Activate-on-demand: No"
-    else
-	$ECHO "Activate-on-demand: Yes; idle timeout = $D seconds"
-    fi
-
-    if [ "$DNS1" != "" ] ; then
-        if [ "$DNS1" = "server" ] ; then
-	    $ECHO "DNS addresses:      Supplied by ISP's server"
-        else
-	    $ECHO "Primary DNS:        $DNS1"
-	    if [ "$DNS2" != "" ] ; then
-		$ECHO "Secondary DNS:      $DNS2"
-	    fi
-        fi
-    else
-	$ECHO "DNS:                Do not adjust"
-    fi
-    $ECHO "Firewalling:        $FIREWALL"
-    $ECHO ""
-    while [ true ] ; do
-        $ECHO -n '>>> Accept these settings and adjust configuration files (y/n)? '
-        read ANS
-	case "ANS" in
-	    Y|y|yes|Yes|oui|Oui)
-		ANS=y
-		;;
-            N|n|no|No|non|Non)
-		ANS=n
-		;;
-	esac
-	if [ "$ANS" = "y" -o "$ANS" = "n" ] ; then
-	    break
-        fi
-    done
-    if [ "$ANS" = "y" ] ; then
-	break
-    fi
-done
-
-# Adjust configuration files.  First to $CONFIG
-
-$ECHO "Adjusting $CONFIG"
-
-copy $CONFIG $CONFIG-bak
-if [ "$DNS1" = "server" ] ; then
-    DNSTYPE=SERVER
-    DNS1=""
-    USEPEERDNS=yes
-else
-    USEPEERDNS=no
-    if [ "$DNS1" = "" ] ; then
-	DNSTYPE=NOCHANGE
-    else
-	DNSTYPE=SPECIFY
-    fi
-fi
-
-# Where is pppd likely to put its pid?
-if [ -d /var/run ] ; then
-    VARRUN=/var/run
-else
-    VARRUN=/etc/ppp
-fi
-
-# Some #$(*& ISP's use a slash in the user name...
-sed -e "s&^USER=.*&USER='$U'&" \
-    -e "s&^ETH=.*&ETH='$E'&" \
-    -e "s&^PIDFILE=.*&PIDFILE=\"$VARRUN/\$CF_BASE-adsl.pid\"&" \
-    -e "s/^FIREWALL=.*/FIREWALL=$FIREWALL/" \
-    -e "s/^DEMAND=.*/DEMAND=$D/" \
-    -e "s/^DNSTYPE=.*/DNSTYPE=$DNSTYPE/" \
-    -e "s/^DNS1=.*/DNS1=$DNS1/" \
-    -e "s/^DNS2=.*/DNS2=$DNS2/" \
-    -e "s/^USEPEERDNS=.*/USEPEERDNS=$USEPEERDNS/" \
-    < $CONFIG-bak > $CONFIG
-
-if [ $? != 0 ] ; then
-    $ECHO "** Error modifying $CONFIG"
-    $ECHO "** Quitting"
-    exit 1
-fi
-
-if [ "$DNS1" != "" ] ; then
-    if [ "$DNS1" != "server" ] ; then
-	$ECHO "Adjusting /etc/resolv.conf"
-	if [ -r /etc/resolv.conf ] ; then
-	    grep -s "MADE-BY-RP-PPPOE" /etc/resolv.conf > /dev/null 2>&1
-	    if [ "$?" != 0 ] ; then
-		$ECHO "  (But first backing it up to /etc/resolv.conf-bak)"
-		copy /etc/resolv.conf /etc/resolv.conf-bak
-	    fi
-	fi
-	$ECHO "# MADE-BY-RP-PPPOE" > /etc/resolv.conf
-	$ECHO "nameserver $DNS1" >> /etc/resolv.conf
-	if [ "$DNS2" != "" ] ; then
-	    $ECHO "nameserver $DNS2" >> /etc/resolv.conf
-	fi
-    fi
-fi
-
-$ECHO "Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets"
-if [ -r /etc/ppp/pap-secrets ] ; then
-    $ECHO "  (But first backing it up to /etc/ppp/pap-secrets-bak)"
-    copy /etc/ppp/pap-secrets /etc/ppp/pap-secrets-bak
-else
-    cp /dev/null /etc/ppp/pap-secrets-bak
-fi
-if [ -r /etc/ppp/chap-secrets ] ; then
-    $ECHO "  (But first backing it up to /etc/ppp/chap-secrets-bak)"
-    copy /etc/ppp/chap-secrets /etc/ppp/chap-secrets-bak
-else
-    cp /dev/null /etc/ppp/chap-secrets-bak
-fi
-
-egrep -v "^$U|^\"$U\"" /etc/ppp/pap-secrets-bak > /etc/ppp/pap-secrets
-$ECHO "\"$U\"	*	\"$PWD1\"" >> /etc/ppp/pap-secrets
-egrep -v "^$U|^\"$U\"" /etc/ppp/chap-secrets-bak > /etc/ppp/chap-secrets
-$ECHO "\"$U\"	*	\"$PWD1\"" >> /etc/ppp/chap-secrets
-
-$ECHO ""
-$ECHO ""
-$ECHO ""
-$ECHO "Congratulations, it should be all set up!"
-$ECHO ""
-$ECHO "Type 'adsl-start' to bring up your ADSL link and 'adsl-stop' to bring"
-$ECHO "it down.  Type 'adsl-status' to see the link status."
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-start.in b/mdk-stage1/rp-pppoe/scripts/adsl-start.in
deleted file mode 100755
index 33251a851..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-start.in
+++ /dev/null
@@ -1,186 +0,0 @@
-#!/bin/sh
-# @configure_input@
-#***********************************************************************
-#
-# adsl-start
-#
-# Shell script to bring up an ADSL connection
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-start [config_file]
-#        adsl-start interface user [config_file]
-# Second form overrides USER and ETH from config file.
-# If config_file is omitted, defaults to /etc/ppp/pppoe.conf
-#
-#***********************************************************************
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-CONNECT=@sbindir@/adsl-connect
-ECHO=@ECHO@
-IFCONFIG=/sbin/ifconfig
-
-# Defaults
-CONFIG=/etc/ppp/pppoe.conf
-USER=""
-ETH=""
-ME=`basename $0`
-# Must be root
-if [ "`@ID@ -u`" != 0 ] ; then
-    $ECHO "$ME: You must be root to run this script" >& 2
-    exit 1
-fi
-
-# Debugging
-if [ "$DEBUG" = "1" ] ; then
-    $ECHO "*** Running in debug mode... please be patient..."
-    DEBUG=/tmp/pppoe-debug-$$
-    export DEBUG
-    mkdir $DEBUG
-    if [ "$?" != 0 ] ; then
-	$ECHO "Could not create directory $DEBUG... exiting"
-	exit 1
-    fi
-    DEBUG=$DEBUG/pppoe-debug.txt
-
-    # Initial debug output
-    $ECHO "---------------------------------------------" > $DEBUG
-    $ECHO "* The following section contains information about your system" >> $DEBUG
-    date >> $DEBUG
-    $ECHO "Output of uname -a" >> $DEBUG
-    uname -a >> $DEBUG
-    $ECHO "---------------------------------------------" >> $DEBUG
-    $ECHO "* The following section contains information about your network" >> $DEBUG
-    $ECHO "* interfaces.  The one you chose for PPPoE should contain the words:" >> $DEBUG
-    $ECHO "* 'UP' and 'RUNNING'.  If it does not, you probably have an Ethernet" >> $DEBUG
-    $ECHO "* driver problem." >> $DEBUG
-    $ECHO "Output of ifconfig -a" >> $DEBUG
-    $IFCONFIG -a >> $DEBUG
-    $ECHO "---------------------------------------------" >> $DEBUG
-    if [ "`uname -s`" = "Linux" ] ; then
-        $ECHO "* The following section contains information about kernel modules" >> $DEBUG
-	$ECHO "* If the module for your Ethernet card is 'tulip', you might" >> $DEBUG
-	$ECHO "* want to look for an updated version at http://www.scyld.com" >> $DEBUG
-	$ECHO "Output of lsmod" >> $DEBUG
-	lsmod >> $DEBUG
-	$ECHO "---------------------------------------------" >> $DEBUG
-    fi
-    $ECHO "* The following section lists your routing table." >> $DEBUG
-    $ECHO "* If you have an entry which starts with '0.0.0.0', you probably" >> $DEBUG
-    $ECHO "* have defined a default route and gateway, and pppd will" >> $DEBUG
-    $ECHO "* not create a default route using your ISP.  Try getting" >> $DEBUG
-    $ECHO "* rid of this route." >> $DEBUG
-    $ECHO "Output of netstat -n -r" >> $DEBUG
-    netstat -n -r >> $DEBUG
-    $ECHO "---------------------------------------------" >> $DEBUG
-    $ECHO "Contents of /etc/resolv.conf" >> $DEBUG
-    $ECHO "* The following section lists DNS setup." >> $DEBUG
-    $ECHO "* If you can browse by IP address, but not name, suspect" >> $DEBUG
-    $ECHO "* a DNS problem." >> $DEBUG
-    cat /etc/resolv.conf >> $DEBUG
-    $ECHO "---------------------------------------------" >> $DEBUG
-    $ECHO "* The following section lists /etc/ppp/options." >> $DEBUG
-    $ECHO "* You should have NOTHING in that file." >> $DEBUG
-    $ECHO "Contents of /etc/ppp/options" >> $DEBUG
-    cat /etc/ppp/options >> $DEBUG 2>/dev/null
-    $ECHO "---------------------------------------------" >> $DEBUG
-else
-    DEBUG=""
-fi
-
-# Sort out command-line arguments
-case "$#" in
-    1)
-	CONFIG="$1"
-	;;
-    3)
-	CONFIG="$3"
-	;;
-esac
-
-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
-    $ECHO "$ME: Cannot read configuration file '$CONFIG'" >& 2
-    exit 1
-fi
-
-. $CONFIG
-
-# Check for command-line overriding of ETH and USER
-case "$#" in
-    2|3)
-	ETH="$1"
-	USER="$2"
-	;;
-esac
-
-# Check for pidfile
-if [ -r "$PIDFILE" ] ; then
-    PID=`cat "$PIDFILE"`
-    # Check if still running
-    kill -0 $PID > /dev/null 2>&1
-    if [ $? = 0 ] ; then
-	$ECHO "$ME: There already seems to be an ADSL connection up (PID $PID)" >& 2
-	exit 1
-    fi
-    # Delete bogus PIDFILE
-    rm -f "$PIDFILE" "$PIDFILE.pppd" "$PIDFILE.pppoe" "$PIDFILE.start"
-fi
-
-echo $$ > $PIDFILE.start
-
-# Start the connection in the background unless we're debugging
-if [ "$DEBUG" != "" ] ; then
-    $CONNECT "$@"
-    exit 0
-fi
-
-$CONNECT "$@" > /dev/null 2>&1 &
-CONNECT_PID=$!
-
-if [ "$CONNECT_TIMEOUT" = "" -o "$CONNECT_TIMEOUT" = 0 ] ; then
-    exit 0
-fi
-
-# Don't monitor connection if dial-on-demand
-if [ "$DEMAND" != "" -a "$DEMAND" != "no" ] ; then
-    exit 0
-fi
-
-# Monitor connection
-TIME=0
-while [ true ] ; do
-    @sbindir@/adsl-status $CONFIG > /dev/null 2>&1
-
-    # Looks like the interface came up
-    if [ $? = 0 ] ; then
-	# Print newline if standard input is a TTY
-	tty -s && $ECHO " Connected!"
-	exit 0
-    fi
-
-    if test -n "$FORCEPING" ; then
-	$ECHO -n "$FORCEPING"
-    else
-	tty -s && $ECHO -n "$PING"
-    fi
-    sleep $CONNECT_POLL
-    TIME=`expr $TIME + $CONNECT_POLL`
-    if [ $TIME -gt $CONNECT_TIMEOUT ] ; then
-	break
-    fi
-done
-
-$ECHO "TIMED OUT" >& 2
-# Timed out!  Kill the adsl-connect process and quit
-kill $CONNECT_PID > /dev/null 2>&1
-exit 1
-
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-status b/mdk-stage1/rp-pppoe/scripts/adsl-status
deleted file mode 100755
index 18b100ab2..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-status
+++ /dev/null
@@ -1,82 +0,0 @@
-#!/bin/sh
-#***********************************************************************
-#
-# adsl-status
-#
-# Shell script to report on status of ADSL connection
-#
-# Copyright (C) 2000-2001 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-status [config_file]
-# If config_file is omitted, defaults to /etc/ppp/pppoe.conf
-#
-#***********************************************************************
-
-# Defaults
-CONFIG=/etc/ppp/pppoe.conf
-
-case "$#" in
-    1)
-	CONFIG="$1"
-	;;
-esac
-
-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
-    echo "$0: Cannot read configuration file '$CONFIG'" >& 2
-    exit 1
-fi
-
-. $CONFIG
-
-PPPOE_PIDFILE="$PIDFILE.pppoe"
-PPPD_PIDFILE="$PIDFILE.pppd"
-
-if [ "$DEMAND" != "no" ] ; then
-    echo "Note: You have enabled demand-connection; adsl-status may be inaccurate."
-fi
-
-# If no PPPOE_PIDFILE, connection is down, unless we're using the Linux plugin
-if [ "$LINUX_PLUGIN" = "" ] ; then
-    if [ ! -r "$PPPOE_PIDFILE" ] ; then
-	echo "adsl-status: Link is down (can't read pppoe PID file $PPPOE_PIDFILE)"
-	exit 1
-    fi
-fi
-
-# If no PPPD_PIDFILE, something fishy!
-if [ ! -r "$PPPD_PIDFILE" ] ; then
-    echo "adsl-status: Link is down (can't read pppd PID file $PPPD_PIDFILE)"
-    exit 1
-fi
-
-PPPD_PID=`cat "$PPPD_PIDFILE"`
-
-# Sigh.  Some versions of pppd put PID files in /var/run; others put them
-# in /etc/ppp.  Since it's too messy to figure out what pppd does, we
-# try both locations.
-for i in /etc/ppp/ppp*.pid /var/run/ppp*.pid ; do
-    if [ -r $i ] ; then
-	PID=`cat $i`
-	if [ "$PID" = "$PPPD_PID" ] ; then
-	    IF=`basename $i .pid`
-	    netstat -rn | grep " ${IF}\$" > /dev/null
-	    # /sbin/ifconfig $IF | grep "UP.*POINTOPOINT" > /dev/null
-	    if [ "$?" != "0" ] ; then
-		echo "adsl-status: Link is attached to $IF, but $IF is down"
-		exit 1
-	    fi
-	    echo "adsl-status: Link is up and running on interface $IF"
-	    /sbin/ifconfig $IF
-	    exit 0
-	fi
-    fi
-done
-
-echo "adsl-status: Link is down -- could not find interface corresponding to"
-echo "pppd pid $PPPD_PID"
-exit 1
\ No newline at end of file
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-stop.in b/mdk-stage1/rp-pppoe/scripts/adsl-stop.in
deleted file mode 100755
index af0867573..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-stop.in
+++ /dev/null
@@ -1,84 +0,0 @@
-#!/bin/sh
-# @configure_input@
-#***********************************************************************
-#
-# adsl-stop
-#
-# Shell script to bring down an ADSL connection
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-stop [config_file]
-# If config_file is omitted, defaults to /etc/ppp/pppoe.conf
-#
-#***********************************************************************
-
-ME="`basename $0`"
-LOGGER="/usr/bin/logger -t $ME"
-CONFIG="$1"
-if [ "$CONFIG" = "" ] ; then
-    CONFIG=/etc/ppp/pppoe.conf
-fi
-
-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
-    echo "$ME: Cannot read configuration file '$CONFIG'" >& 2
-    exit 1
-fi
-
-. $CONFIG
-
-PPPOE_PIDFILE="$PIDFILE.pppoe"
-PPPD_PIDFILE="$PIDFILE.pppd"
-STARTPID="$PIDFILE.start"
-
-# Backward config file compatibility
-if test "$DEMAND" = "" ; then
-	DEMAND=no
-fi
-
-# Ignore SIGTERM
-trap "" 15
-
-# Check for pidfile
-if [ -r "$PIDFILE" ] ; then
-    PID=`cat $PIDFILE`
-
-    # Check if still running
-    kill -0 $PID > /dev/null 2>&1
-    if [ $? != 0 ] ; then
-	echo "$ME: The adsl-connect script (PID $PID) appears to have died" >& 2
-    fi
-
-    # Kill pppd, which should in turn kill pppoe
-    if [ -r "$PPPD_PIDFILE" ] ; then
-	PPPD_PID=`cat "$PPPD_PIDFILE"`
-	$LOGGER -p daemon.notice "Killing pppd"
-	echo "Killing pppd ($PPPD_PID)"
-	kill $PPPD_PID > /dev/null 2>&1 || exit 1
-    fi
-
-    # Kill adsl-start
-    PIDS=`cat $STARTPID`
-    kill -0 $PIDS > /dev/null 2>&1
-    if [ $? = 0 ] ; then
-	$LOGGER -p daemon.notice "Killing adsl-connect"
-	kill $PIDS > /dev/null 2>&1
-    fi
-
-    # Kill adsl-connect
-    $LOGGER -p daemon.notice "Killing adsl-connect"
-    echo "Killing adsl-connect ($PID)"
-    kill $PID > /dev/null 2>&1
-
-    rm -f "$PIDFILE" "$PPPD_PIDFILE" "$PPPOE_PIDFILE" "$STARTPID"
-else
-    echo "$ME: No ADSL connection appears to be running" >&2
-    exit 1
-fi
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/src/.cvsignore b/mdk-stage1/rp-pppoe/src/.cvsignore
deleted file mode 100644
index a59197332..000000000
--- a/mdk-stage1/rp-pppoe/src/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-pppoe
-pppoe-DIET
diff --git a/mdk-stage1/rp-pppoe/src/Makefile b/mdk-stage1/rp-pppoe/src/Makefile
deleted file mode 100644
index f96b5714e..000000000
--- a/mdk-stage1/rp-pppoe/src/Makefile
+++ /dev/null
@@ -1,58 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ../..
-
-include $(top_dir)/Makefile.common
-
-
-TARGETS = pppoe
-
-ifeq (DIETLIBC, $(L))
-TARGETS += pppoe-DIET
-endif
-
-BINTARGET = ../pppoe-bin
-
-
-all: $(TARGETS)
-
-clean:
-	rm -f *.o *.a $(BINTARGET) pppoe pppoe-DIET
-
-FLAGS = -Wall -Werror -Os -fomit-frame-pointer '-DPPPOE_PATH="/sbin/pppoe"' '-DPPPD_PATH="/sbin/pppd"' '-DVERSION="3.0-stg1"'
-
-
-
-OBJS = pppoe.o if.o debug.o common.o ppp.o discovery.o
-OBJS-DIET = $(subst .o,-DIET.o,$(OBJS))
-
-
-pppoe: $(OBJS)
-	gcc -static -o $@ $^
-	$(STRIPCMD) $@
-	cp -f $@ $(BINTARGET)
-
-pppoe-DIET: $(OBJS-DIET)
-	gcc $(DIETLIBC_LDFLAGS_STAGE1) -o $@ $^ $(DIETLIBC_LIBC)
-	$(STRIPCMD) $@
-	cp -f $@ $(BINTARGET)
-
-$(OBJS): %.o: %.c
-	gcc $(FLAGS) $(GLIBC_INCLUDES) $(INCS) -c $< -o $@
-
-$(OBJS-DIET): %-DIET.o: %.c
-	gcc $(FLAGS) $(DIETLIBC_INCLUDES) $(INCS) -c $< -o $@
-
diff --git a/mdk-stage1/rp-pppoe/src/Makefile.in b/mdk-stage1/rp-pppoe/src/Makefile.in
deleted file mode 100644
index 8eee012cb..000000000
--- a/mdk-stage1/rp-pppoe/src/Makefile.in
+++ /dev/null
@@ -1,257 +0,0 @@
-# @configure_input@
-#***********************************************************************
-#
-# Makefile
-#
-# Makefile for Roaring Penguin's Linux user-space PPPoE client.
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# This program may be distributed according to the terms of the GNU
-# General Public License, version 2 or (at your option) any later version.
-#
-# $Id$
-#***********************************************************************
-
-# Version is set ONLY IN THE MAKEFILE!  Don't delete this!
-VERSION=3.0
-
-DEFINES= 
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-mandir=@mandir@
-docdir=@prefix@/doc/rp-pppoe-$(VERSION)
-install=@INSTALL@
-install_dir=@INSTALL@ -d
-sbindir=@sbindir@
-
-# Plugin for pppd on Linux
-LINUX_KERNELMODE_PLUGIN=@LINUX_KERNELMODE_PLUGIN@
-PPPD_INCDIR=@PPPD_INCDIR@
-
-# PPPoE relay -- currently only supported on Linux
-PPPOE_RELAY=@PPPOE_RELAY@
-
-# Program paths
-PPPOE_PATH=$(sbindir)/pppoe
-PPPD_PATH=@PPPD@
-
-# Kernel-mode plugin gets installed here.
-PLUGIN_DIR=/etc/ppp/plugins
-PLUGIN_PATH=$(PLUGIN_DIR)/rp-pppoe.so
-
-# Configuration file paths
-PPPOESERVER_PPPD_OPTIONS=/etc/ppp/pppoe-server-options
-
-PATHS='-DPPPOE_PATH="$(PPPOE_PATH)"' '-DPPPD_PATH="$(PPPD_PATH)"' \
-	'-DPLUGIN_PATH="$(PLUGIN_PATH)"' \
-	'-DPPPOE_SERVER_OPTIONS="$(PPPOESERVER_PPPD_OPTIONS)"'
-
-CFLAGS= @CFLAGS@ $(DEFINES) $(PATHS)
-TARGETS=@TARGETS@
-
-all: $(TARGETS)
-	@echo ""
-	@echo "Type 'make install' as root to install the software."
-
-pppoe-sniff: pppoe-sniff.o if.o common.o debug.o
-	@CC@ -o pppoe-sniff pppoe-sniff.o if.o common.o debug.o $(LIBS)
-
-pppoe-server: pppoe-server.o if.o debug.o common.o md5.o
-	@CC@ -o pppoe-server pppoe-server.o if.o debug.o common.o md5.o $(LIBS)
-
-pppoe: pppoe.o if.o debug.o common.o ppp.o discovery.o
-	@CC@ -o pppoe pppoe.o if.o debug.o common.o ppp.o discovery.o $(LIBS)
-
-pppoe-relay: relay.o if.o debug.o common.o
-	@CC@ -o pppoe-relay relay.o if.o debug.o common.o $(LIBS)
-
-pppoe.o: pppoe.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o pppoe.o pppoe.c
-
-discovery.o: discovery.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o discovery.o discovery.c
-
-ppp.o: ppp.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o ppp.o ppp.c
-
-md5.o: md5.c md5.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o md5.o md5.c
-
-pppoe-server.o: pppoe-server.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o pppoe-server.o pppoe-server.c
-
-pppoe-sniff.o: pppoe-sniff.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o pppoe-sniff.o pppoe-sniff.c
-
-if.o: if.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o if.o if.c
-
-common.o: common.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o common.o common.c
-
-debug.o: debug.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o debug.o debug.c
-
-relay.o: relay.c relay.h pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o relay.o relay.c
-
-# Linux-specific plugin
-rp-pppoe.so: plugin/libplugin.a plugin/plugin.o
-	@CC@ -o rp-pppoe.so -shared plugin/plugin.o plugin/libplugin.a
-
-plugin/plugin.o: plugin.c
-	@CC@ '-DVERSION="$(VERSION)"' -I$(PPPD_INCDIR) -c -o plugin/plugin.o -fPIC plugin.c
-
-plugin/libplugin.a: plugin/discovery.o plugin/if.o plugin/common.o plugin/debug.o
-	ar -rc $@ $^
-
-plugin/discovery.o: discovery.c
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o plugin/discovery.o -fPIC discovery.c
-
-plugin/if.o: if.c
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o plugin/if.o -fPIC if.c
-
-plugin/debug.o: debug.c
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o plugin/debug.o -fPIC debug.c
-
-plugin/common.o: common.c
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o plugin/common.o -fPIC common.c
-
-install: all
-	-mkdir -p $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 -s pppoe $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 -s pppoe-server $(RPM_INSTALL_ROOT)$(sbindir)
-	if test -x pppoe-relay ; then $(install) -m 755 -s pppoe-relay $(RPM_INSTALL_ROOT)$(sbindir); fi
-	$(install) -m 755 -s pppoe-sniff $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 ../scripts/adsl-connect $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 ../scripts/adsl-start $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 ../scripts/adsl-status $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 ../scripts/adsl-stop $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 ../scripts/adsl-setup $(RPM_INSTALL_ROOT)$(sbindir)
-	-mkdir -p $(RPM_INSTALL_ROOT)$(docdir)
-	$(install) -m 644 ../doc/CHANGES $(RPM_INSTALL_ROOT)$(docdir)
-	$(install) -m 644 ../doc/KERNEL-MODE-PPPOE $(RPM_INSTALL_ROOT)$(docdir)
-	$(install) -m 644 ../doc/HOW-TO-CONNECT $(RPM_INSTALL_ROOT)$(docdir)
-	$(install) -m 644 ../doc/LICENSE $(RPM_INSTALL_ROOT)$(docdir)
-	$(install) -m 644 ../README $(RPM_INSTALL_ROOT)$(docdir)
-	$(install) -m 644 ../configs/pap-secrets $(RPM_INSTALL_ROOT)$(docdir)
-	-mkdir -p $(RPM_INSTALL_ROOT)$(mandir)/man8
-	for i in $(TARGETS) ; do \
-		if test -f ../man/$$i.8 ; then \
-			$(install) -m 644 ../man/$$i.8 $(RPM_INSTALL_ROOT)$(mandir)/man8 || exit 1; \
-		fi; \
-	done
-	$(install) -m 644 ../man/adsl-start.8 $(RPM_INSTALL_ROOT)$(mandir)/man8
-	$(install) -m 644 ../man/adsl-stop.8 $(RPM_INSTALL_ROOT)$(mandir)/man8
-	$(install) -m 644 ../man/adsl-status.8 $(RPM_INSTALL_ROOT)$(mandir)/man8
-	$(install) -m 644 ../man/adsl-connect.8 $(RPM_INSTALL_ROOT)$(mandir)/man8
-	$(install) -m 644 ../man/adsl-setup.8 $(RPM_INSTALL_ROOT)$(mandir)/man8
-	-mkdir -p $(RPM_INSTALL_ROOT)$(mandir)/man5
-	$(install) -m 644 ../man/pppoe.conf.5 $(RPM_INSTALL_ROOT)$(mandir)/man5
-	-mkdir -p $(RPM_INSTALL_ROOT)/etc/ppp
-	-mkdir -p $(RPM_INSTALL_ROOT)$(PLUGIN_DIR)
-	-echo "# Directory created by rp-pppoe for kernel-mode plugin" > $(RPM_INSTALL_ROOT)$(PLUGIN_DIR)/README
-	@if test -r rp-pppoe.so; then $(install) -m 755 rp-pppoe.so $(RPM_INSTALL_ROOT)$(PLUGIN_DIR); fi
-	@for i in pppoe.conf firewall-standalone firewall-masq ; do \
-		if [ ! -f $(RPM_INSTALL_ROOT)/etc/ppp/$$i ] ; then \
-			$(install) -m 644 ../configs/$$i $(RPM_INSTALL_ROOT)/etc/ppp ; \
-		else \
-			echo "NOT overwriting existing $(RPM_INSTALL_ROOT)/etc/ppp/$$i" ;\
-			$(install) -m 644 ../configs/$$i $(RPM_INSTALL_ROOT)/etc/ppp/$$i-$(VERSION) ;\
-		fi ;\
-	done
-	@if [ ! -f $(RPM_INSTALL_ROOT)$(PPPOESERVER_PPPD_OPTIONS) ] ; then \
-		$(install) -m 644 ../configs/pppoe-server-options $(RPM_INSTALL_ROOT)$(PPPOESERVER_PPPD_OPTIONS) ; \
-	else \
-		echo "NOT overwriting existing $(RPM_INSTALL_ROOT)$(PPPOESERVER_PPPD_OPTIONS)"; \
-		$(install) -m 644 ../configs/pppoe-server-options $(RPM_INSTALL_ROOT)$(PPPOESERVER_PPPD_OPTIONS)-example ; \
-	fi
-	@if [ -f /etc/redhat-release ] ; then \
-		echo "Looks like a Red Hat system; installing $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl" ; \
-		mkdir -p $(RPM_INSTALL_ROOT)/etc/rc.d/init.d ;\
-		$(install) -m 755 ../scripts/adsl-init $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl ; \
-	fi
-	@if [ -f /etc/turbolinux-release ] ; then \
-		echo "Looks like a TurboLinux system; installing $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl" ; \
-		mkdir -p $(RPM_INSTALL_ROOT)/etc/rc.d/init.d ;\
-		$(install) -m 755 adsl-init-turbolinux $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl ; \
-	fi
-	@if [ -f /etc/SuSE-release ] ; then \
-		echo "Looks like a SuSE Linux system; installing $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl" ; \
-		mkdir -p $(RPM_INSTALL_ROOT)/etc/rc.d/init.d ;\
-		$(install) -m 755 ../scripts/adsl-init-suse $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl ; \
-	fi
-	@echo ""
-	@echo "Type 'adsl-setup' to configure the software."
-
-distro:
-	cd ..; \
-	rm -rf rp-pppoe-$(VERSION) ; \
-	mkdir rp-pppoe-$(VERSION) || exit 1; \
-	for i in README go go-gui rp-pppoe.spec rp-pppoe-gui.spec; do \
-		cp $$i rp-pppoe-$(VERSION) || exit 1; \
-	done ; \
-	mkdir rp-pppoe-$(VERSION)/gui || exit 1; \
-	for i in Makefile.in tkpppoe.in wrapper.c tkpppoe.1 pppoe-wrapper.1 ; do \
-		cp gui/$$i rp-pppoe-$(VERSION)/gui || exit 1; \
-	done; \
-	mkdir rp-pppoe-$(VERSION)/gui/html || exit 1; \
-	for i in mainwin-busy.png mainwin-nonroot.png mainwin.png props-advanced.png props-basic.png props-nic.png props-options.png tkpppoe.html ; do \
-		cp gui/html/$$i rp-pppoe-$(VERSION)/gui/html || exit 1; \
-	done; \
-	mkdir rp-pppoe-$(VERSION)/configs || exit 1; \
-	for i in firewall-masq firewall-standalone pap-secrets pppoe-server-options pppoe.conf ; do \
-		cp configs/$$i rp-pppoe-$(VERSION)/configs || exit 1; \
-	done ; \
-	mkdir rp-pppoe-$(VERSION)/doc || exit 1; \
-	for i in CHANGES KERNEL-MODE-PPPOE HOW-TO-CONNECT LICENSE PROBLEMS ; do \
-		cp doc/$$i rp-pppoe-$(VERSION)/doc || exit 1; \
-	done; \
-	mkdir rp-pppoe-$(VERSION)/man || exit 1; \
-	for i in adsl-connect.8 adsl-setup.8 adsl-start.8 adsl-status.8 adsl-stop.8 pppoe-server.8 pppoe-sniff.8 pppoe.8 pppoe-relay.8 pppoe.conf.5 ; do \
-		cp man/$$i rp-pppoe-$(VERSION)/man || exit 1; \
-	done; \
-	mkdir rp-pppoe-$(VERSION)/scripts || exit 1; \
-	for i in adsl-connect.in adsl-init-suse.in adsl-init-turbolinux.in adsl-init.in adsl-setup.in adsl-start.in adsl-stop.in adsl-status ; do \
-		cp scripts/$$i rp-pppoe-$(VERSION)/scripts || exit 1; \
-	done; \
-	mkdir rp-pppoe-$(VERSION)/src || exit 1; \
-	for i in Makefile.in install-sh common.c config.h.in configure configure.in debug.c discovery.c if.c md5.c md5.h ppp.c pppoe-server.c pppoe-sniff.c pppoe.c pppoe.h plugin.c relay.c relay.h ; do \
-		cp src/$$i rp-pppoe-$(VERSION)/src || exit 1; \
-	done; \
-	mkdir rp-pppoe-$(VERSION)/src/plugin || exit 1; \
-	tar cvf rp-pppoe-$(VERSION).tar rp-pppoe-$(VERSION)/* ; \
-	gzip -f -v -9 rp-pppoe-$(VERSION).tar ; \
-
-rpms: distro
-	cp ../rp-pppoe-$(VERSION).tar.gz /usr/src/redhat/SOURCES
-	cd ..; \
-	rpm -ba rp-pppoe.spec; \
-	rpm -ba rp-pppoe-gui.spec
-
-clean:
-	rm -f *.o pppoe pppoe-sniff pppoe-server core rp-pppoe.so plugin/*.o plugin/libplugin.a *~
-
-distclean: clean
-	rm -f Makefile config.h config.cache config.log config.status
-	rm -f ../scripts/adsl-connect ../scripts/adsl-start ../scripts/adsl-stop ../scripts/adsl-init ../scripts/adsl-setup ../scripts/adsl-init-suse ../scripts/adsl-init-turbolinux
-
-update-version:
-	sed -e 's/^Version: .*$$/Version: $(VERSION)/' ../rp-pppoe.spec > ../rp-pppoe.spec.new && mv ../rp-pppoe.spec.new ../rp-pppoe.spec
-	sed -e 's+^Source: .*$$+Source: http://www.roaringpenguin.com/pppoe/rp-pppoe-$(VERSION).tar.gz+' ../rp-pppoe.spec > ../rp-pppoe.spec.new && mv ../rp-pppoe.spec.new ../rp-pppoe.spec
-	sed -e 's/^Version: .*$$/Version: $(VERSION)/' ../rp-pppoe-gui.spec > ../rp-pppoe-gui.spec.new && mv ../rp-pppoe-gui.spec.new ../rp-pppoe-gui.spec
-	sed -e 's+^Source: .*$$+Source: http://www.roaringpenguin.com/pppoe/rp-pppoe-$(VERSION).tar.gz+' ../rp-pppoe-gui.spec > ../rp-pppoe-gui.spec.new && mv ../rp-pppoe-gui.spec.new ../rp-pppoe-gui.spec
-	sed -e 's+^Requires: rp-pppoe >=.*$$+Requires: rp-pppoe >= $(VERSION)+' ../rp-pppoe-gui.spec > ../rp-pppoe-gui.spec.new && mv ../rp-pppoe-gui.spec.new ../rp-pppoe-gui.spec
-
-# Convenience target for David!  Don't try to use this one.
-km:
-	./configure --enable-plugin=/home/dfs/Archive/PPP/ppp-2.4.0.pppoe4-patched-dfs
-
-.PHONY: update-version
-
-.PHONY: clean
-
-.PHONY: distclean
-
-.PHONY: rpms
diff --git a/mdk-stage1/rp-pppoe/src/common.c b/mdk-stage1/rp-pppoe/src/common.c
deleted file mode 100644
index b27302104..000000000
--- a/mdk-stage1/rp-pppoe/src/common.c
+++ /dev/null
@@ -1,485 +0,0 @@
-/***********************************************************************
-*
-* common.c
-*
-* Implementation of user-space PPPoE redirector for Linux.
-*
-* Common functions used by PPPoE client and server
-*
-* Copyright (C) 2000 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#include <string.h>
-#include <errno.h>
-#include <stdlib.h>
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-/**********************************************************************
-*%FUNCTION: parsePacket
-*%ARGUMENTS:
-* packet -- the PPPoE discovery packet to parse
-* func -- function called for each tag in the packet
-* extra -- an opaque data pointer supplied to parsing function
-*%RETURNS:
-* 0 if everything went well; -1 if there was an error
-*%DESCRIPTION:
-* Parses a PPPoE discovery packet, calling "func" for each tag in the packet.
-* "func" is passed the additional argument "extra".
-***********************************************************************/
-int
-parsePacket(PPPoEPacket *packet, ParseFunc *func, void *extra)
-{
-    UINT16_t len = ntohs(packet->length);
-    unsigned char *curTag;
-    UINT16_t tagType, tagLen;
-
-    if (packet->ver != 1) {
-	syslog(LOG_ERR, "Invalid PPPoE version (%d)", (int) packet->ver);
-	return -1;
-    }
-    if (packet->type != 1) {
-	syslog(LOG_ERR, "Invalid PPPoE type (%d)", (int) packet->type);
-	return -1;
-    }
-
-    /* Do some sanity checks on packet */
-    if (len > ETH_DATA_LEN - 6) { /* 6-byte overhead for PPPoE header */
-	syslog(LOG_ERR, "Invalid PPPoE packet length (%u)", len);
-	return -1;
-    }
-
-    /* Step through the tags */
-    curTag = packet->payload;
-    while(curTag - packet->payload < len) {
-	/* Alignment is not guaranteed, so do this by hand... */
-	tagType = (((UINT16_t) curTag[0]) << 8) +
-	    (UINT16_t) curTag[1];
-	tagLen = (((UINT16_t) curTag[2]) << 8) +
-	    (UINT16_t) curTag[3];
-	if (tagType == TAG_END_OF_LIST) {
-	    return 0;
-	}
-	if ((curTag - packet->payload) + tagLen + TAG_HDR_SIZE > len) {
-	    syslog(LOG_ERR, "Invalid PPPoE tag length (%u)", tagLen);
-	    return -1;
-	}
-	func(tagType, tagLen, curTag+TAG_HDR_SIZE, extra);
-	curTag = curTag + TAG_HDR_SIZE + tagLen;
-    }
-    return 0;
-}
-
-/**********************************************************************
-*%FUNCTION: findTag
-*%ARGUMENTS:
-* packet -- the PPPoE discovery packet to parse
-* type -- the type of the tag to look for
-* tag -- will be filled in with tag contents
-*%RETURNS:
-* A pointer to the tag if one of the specified type is found; NULL
-* otherwise. 
-*%DESCRIPTION:
-* Looks for a specific tag type.
-***********************************************************************/
-unsigned char *
-findTag(PPPoEPacket *packet, UINT16_t type, PPPoETag *tag)
-{
-    UINT16_t len = ntohs(packet->length);
-    unsigned char *curTag;
-    UINT16_t tagType, tagLen;
-
-    if (packet->ver != 1) {
-	syslog(LOG_ERR, "Invalid PPPoE version (%d)", (int) packet->ver);
-	return NULL;
-    }
-    if (packet->type != 1) {
-	syslog(LOG_ERR, "Invalid PPPoE type (%d)", (int) packet->type);
-	return NULL;
-    }
-
-    /* Do some sanity checks on packet */
-    if (len > ETH_DATA_LEN - 6) { /* 6-byte overhead for PPPoE header */
-	syslog(LOG_ERR, "Invalid PPPoE packet length (%u)", len);
-	return NULL;
-    }
-
-    /* Step through the tags */
-    curTag = packet->payload;
-    while(curTag - packet->payload < len) {
-	/* Alignment is not guaranteed, so do this by hand... */
-	tagType = (((UINT16_t) curTag[0]) << 8) +
-	    (UINT16_t) curTag[1];
-	tagLen = (((UINT16_t) curTag[2]) << 8) +
-	    (UINT16_t) curTag[3];
-	if (tagType == TAG_END_OF_LIST) {
-	    return NULL;
-	}
-	if ((curTag - packet->payload) + tagLen + TAG_HDR_SIZE > len) {
-	    syslog(LOG_ERR, "Invalid PPPoE tag length (%u)", tagLen);
-	    return NULL;
-	}
-	if (tagType == type) {
-	    memcpy(tag, curTag, tagLen + TAG_HDR_SIZE);
-	    return curTag;
-	}
-	curTag = curTag + TAG_HDR_SIZE + tagLen;
-    }
-    return NULL;
-}
-
-/**********************************************************************
-*%FUNCTION: printErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog.
-***********************************************************************/
-void
-printErr(char const *str)
-{
-    fprintf(stderr, "pppoe: %s\n", str);
-    syslog(LOG_ERR, "%s", str);
-}
-
-
-/**********************************************************************
-*%FUNCTION: strDup
-*%ARGUMENTS:
-* str -- string to copy
-*%RETURNS:
-* A malloc'd copy of str.  Exits if malloc fails.
-***********************************************************************/
-char *
-strDup(char const *str)
-{
-    char *copy = malloc(strlen(str)+1);
-    if (!copy) {
-	rp_fatal("strdup failed");
-    }
-    strcpy(copy, str);
-    return copy;
-}
-
-/**********************************************************************
-*%FUNCTION: computeTCPChecksum
-*%ARGUMENTS:
-* ipHdr -- pointer to IP header
-* tcpHdr -- pointer to TCP header
-*%RETURNS:
-* The computed TCP checksum
-***********************************************************************/
-UINT16_t
-computeTCPChecksum(unsigned char *ipHdr, unsigned char *tcpHdr)
-{
-    UINT32_t sum = 0;
-    UINT16_t count = ipHdr[2] * 256 + ipHdr[3];
-    unsigned char *addr = tcpHdr;
-    unsigned char pseudoHeader[12];
-
-    /* Count number of bytes in TCP header and data */
-    count -= (ipHdr[0] & 0x0F) * 4;
-
-    memcpy(pseudoHeader, ipHdr+12, 8);
-    pseudoHeader[8] = 0;
-    pseudoHeader[9] = ipHdr[9];
-    pseudoHeader[10] = (count >> 8) & 0xFF;
-    pseudoHeader[11] = (count & 0xFF);
-
-    /* Checksum the pseudo-header */
-    sum += * (UINT16_t *) pseudoHeader;
-    sum += * ((UINT16_t *) (pseudoHeader+2));
-    sum += * ((UINT16_t *) (pseudoHeader+4));
-    sum += * ((UINT16_t *) (pseudoHeader+6));
-    sum += * ((UINT16_t *) (pseudoHeader+8));
-    sum += * ((UINT16_t *) (pseudoHeader+10));
-
-    /* Checksum the TCP header and data */
-    while (count > 1) {
-	sum += * (UINT16_t *) addr;
-	addr += 2;
-	count -= 2;
-    }
-    if (count > 0) {
-	sum += *addr;
-    }
-
-    while(sum >> 16) {
-	sum = (sum & 0xffff) + (sum >> 16);
-    }
-    return (UINT16_t) (~sum & 0xFFFF);
-}
-
-/**********************************************************************
-*%FUNCTION: clampMSS
-*%ARGUMENTS:
-* packet -- PPPoE session packet
-* dir -- either "incoming" or "outgoing"
-* clampMss -- clamp value
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Clamps MSS option if TCP SYN flag is set.
-***********************************************************************/
-void
-clampMSS(PPPoEPacket *packet, char const *dir, int clampMss)
-{
-    unsigned char *tcpHdr;
-    unsigned char *ipHdr;
-    unsigned char *opt;
-    unsigned char *endHdr;
-    unsigned char *mssopt = NULL;
-    UINT16_t csum;
-
-    int len;
-
-    /* Is it IPv4? */
-    if (packet->payload[0] != 0x00 ||
-	packet->payload[1] != 0x21) {
-	/* Nope, ignore it */
-	return;
-    }
-
-    ipHdr = packet->payload + 2;
-
-    /* Is it too short? */
-    len = (int) ntohs(packet->length);
-    if (len < 42) {
-	/* 20 byte IP header; 20 byte TCP header; 2 byte PPP protocol */
-	return;
-    }
-
-    /* Verify once more that it's IPv4 */
-    if ((ipHdr[0] & 0xF0) != 0x40) {
-	return;
-    }
-
-    /* Is it a fragment that's not at the beginning of the packet? */
-    if ((ipHdr[6] & 0x1F) || ipHdr[7]) {
-	/* Yup, don't touch! */
-	return;
-    }
-    /* Is it TCP? */
-    if (ipHdr[9] != 0x06) {
-	return;
-    }
-
-    /* Get start of TCP header */
-    tcpHdr = ipHdr + (ipHdr[0] & 0x0F) * 4;
-
-    /* Is SYN set? */
-    if (!(tcpHdr[13] & 0x02)) {
-	return;
-    }
-
-    /* Compute and verify TCP checksum -- do not touch a packet with a bad
-       checksum */
-    csum = computeTCPChecksum(ipHdr, tcpHdr);
-    if (csum) {
-	syslog(LOG_ERR, "Bad TCP checksum %x", (unsigned int) csum);
-
-	/* Upper layers will drop it */
-	return;
-    }
-
-    /* Look for existing MSS option */
-    endHdr = tcpHdr + ((tcpHdr[12] & 0xF0) >> 2);
-    opt = tcpHdr + 20;
-    while (opt < endHdr) {
-	if (!*opt) break;	/* End of options */
-	switch(*opt) {
-	case 1:
-	    opt++;
-	    break;
-
-	case 2:
-	    if (opt[1] != 4) {
-		/* Something fishy about MSS option length. */
-		syslog(LOG_ERR,
-		       "Bogus length for MSS option (%u) from %u.%u.%u.%u",
-		       (unsigned int) opt[1],
-		       (unsigned int) ipHdr[12],
-		       (unsigned int) ipHdr[13],
-		       (unsigned int) ipHdr[14],
-		       (unsigned int) ipHdr[15]);
-		return;
-	    }
-	    mssopt = opt;
-	    break;
-	default:
-	    if (opt[1] < 2) {
-		/* Someone's trying to attack us? */
-		syslog(LOG_ERR,
-		       "Bogus TCP option length (%u) from %u.%u.%u.%u",
-		       (unsigned int) opt[1],
-		       (unsigned int) ipHdr[12],
-		       (unsigned int) ipHdr[13],
-		       (unsigned int) ipHdr[14],
-		       (unsigned int) ipHdr[15]);
-		return;
-	    }
-	    opt += (opt[1]);
-	    break;
-	}
-	/* Found existing MSS option? */
-	if (mssopt) break;
-    }
-
-    /* If MSS exists and it's low enough, do nothing */
-    if (mssopt) {
-	unsigned mss = mssopt[2] * 256 + mssopt[3];
-	if (mss <= clampMss) {
-	    return;
-	}
-
-	mssopt[2] = (((unsigned) clampMss) >> 8) & 0xFF;
-	mssopt[3] = ((unsigned) clampMss) & 0xFF;
-    } else {
-	/* No MSS option.  Don't add one; we'll have to use 536. */
-	return;
-    }
-
-    /* Recompute TCP checksum */
-    tcpHdr[16] = 0;
-    tcpHdr[17] = 0;
-    csum = computeTCPChecksum(ipHdr, tcpHdr);
-    (* (UINT16_t *) (tcpHdr+16)) = csum;
-}
-
-/***********************************************************************
-*%FUNCTION: sendPADT
-*%ARGUMENTS:
-* conn -- PPPoE connection
-* msg -- if non-NULL, extra error message to include in PADT packet.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADT packet
-***********************************************************************/
-void
-sendPADT(PPPoEConnection *conn, char const *msg)
-{
-    PPPoEPacket packet;
-    unsigned char *cursor = packet.payload;
-
-    UINT16_t plen = 0;
-
-    /* Do nothing if no session established yet */
-    if (!conn->session) return;
-
-    /* Do nothing if no discovery socket */
-    if (conn->discoverySocket < 0) return;
-
-    memcpy(packet.ethHdr.h_dest, conn->peerEth, ETH_ALEN);
-    memcpy(packet.ethHdr.h_source, conn->myEth, ETH_ALEN);
-
-    packet.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
-    packet.ver = 1;
-    packet.type = 1;
-    packet.code = CODE_PADT;
-    packet.session = conn->session;
-
-    /* Reset Session to zero so there is no possibility of
-       recursive calls to this function by any signal handler */
-    conn->session = 0;
-
-    /* If we're using Host-Uniq, copy it over */
-    if (conn->useHostUniq) {
-	PPPoETag hostUniq;
-	pid_t pid = getpid();
-	hostUniq.type = htons(TAG_HOST_UNIQ);
-	hostUniq.length = htons(sizeof(pid));
-	memcpy(hostUniq.payload, &pid, sizeof(pid));
-	memcpy(cursor, &hostUniq, sizeof(pid) + TAG_HDR_SIZE);
-	cursor += sizeof(pid) + TAG_HDR_SIZE;
-	plen += sizeof(pid) + TAG_HDR_SIZE;
-    }
-
-    /* Copy error message */
-    if (msg) {
-	PPPoETag err;
-	size_t elen = strlen(msg);
-	err.type = htons(TAG_GENERIC_ERROR);
-	err.length = htons(elen);
-	strcpy(err.payload, msg);
-	memcpy(cursor, &err, elen + TAG_HDR_SIZE);
-	cursor += elen + TAG_HDR_SIZE;
-	plen += elen + TAG_HDR_SIZE;
-    }
-	    
-    /* Copy cookie and relay-ID if needed */
-    if (conn->cookie.type) {
-	CHECK_ROOM(cursor, packet.payload,
-		   ntohs(conn->cookie.length) + TAG_HDR_SIZE);
-	memcpy(cursor, &conn->cookie, ntohs(conn->cookie.length) + TAG_HDR_SIZE);
-	cursor += ntohs(conn->cookie.length) + TAG_HDR_SIZE;
-	plen += ntohs(conn->cookie.length) + TAG_HDR_SIZE;
-    }
-
-    if (conn->relayId.type) {
-	CHECK_ROOM(cursor, packet.payload,
-		   ntohs(conn->relayId.length) + TAG_HDR_SIZE);
-	memcpy(cursor, &conn->relayId, ntohs(conn->relayId.length) + TAG_HDR_SIZE);
-	cursor += ntohs(conn->relayId.length) + TAG_HDR_SIZE;
-	plen += ntohs(conn->relayId.length) + TAG_HDR_SIZE;
-    }
-
-    packet.length = htons(plen);
-    sendPacket(conn, conn->discoverySocket, &packet, (int) (plen + HDR_SIZE));
-    if (conn->debugFile) {
-	dumpPacket(conn->debugFile, &packet, "SENT");
-	fprintf(conn->debugFile, "\n");
-	fflush(conn->debugFile);
-    }
-    syslog(LOG_INFO,"Sent PADT");
-}
-
-/**********************************************************************
-*%FUNCTION: parseLogErrs
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks error tags out of a packet and logs them.
-***********************************************************************/
-void
-parseLogErrs(UINT16_t type, UINT16_t len, unsigned char *data,
-	     void *extra)
-{
-    switch(type) {
-    case TAG_SERVICE_NAME_ERROR:
-	syslog(LOG_ERR, "PADT: Service-Name-Error: %.*s", (int) len, data);
-	fprintf(stderr, "PADT: Service-Name-Error: %.*s\n", (int) len, data);
-	break;
-    case TAG_AC_SYSTEM_ERROR:
-	syslog(LOG_ERR, "PADT: System-Error: %.*s", (int) len, data);
-	fprintf(stderr, "PADT: System-Error: %.*s\n", (int) len, data);
-	break;
-    case TAG_GENERIC_ERROR:
-	syslog(LOG_ERR, "PADT: Generic-Error: %.*s", (int) len, data);
-	fprintf(stderr, "PADT: Generic-Error: %.*s\n", (int) len, data);
-	break;
-    }
-}
-
diff --git a/mdk-stage1/rp-pppoe/src/config.h b/mdk-stage1/rp-pppoe/src/config.h
deleted file mode 100644
index e3adf4353..000000000
--- a/mdk-stage1/rp-pppoe/src/config.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/* config.h.  Generated automatically by configure.  */
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
-
-/* Define to empty if the keyword does not work.  */
-/* #undef const */
-
-/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
-#define HAVE_SYS_WAIT_H 1
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-/* #undef pid_t */
-
-/* Define as the return type of signal handlers (int or void).  */
-#define RETSIGTYPE void
-
-/* Define if the setvbuf function takes the buffering type as its second
-   argument and the buffer pointer as the third, as on System V
-   before release 3.  */
-/* #undef SETVBUF_REVERSED */
-
-/* Define if you have the ANSI C header files.  */
-#define STDC_HEADERS 1
-
-/* Define if you can safely include both <sys/time.h> and <time.h>.  */
-#define TIME_WITH_SYS_TIME 1
-
-/* Define if your <sys/time.h> declares struct tm.  */
-/* #undef TM_IN_SYS_TIME */
-
-#define HAVE_STRUCT_SOCKADDR_LL 1
-
-/* The number of bytes in a unsigned int.  */
-#define SIZEOF_UNSIGNED_INT 4
-
-/* The number of bytes in a unsigned long.  */
-#define SIZEOF_UNSIGNED_LONG 4
-
-/* The number of bytes in a unsigned short.  */
-#define SIZEOF_UNSIGNED_SHORT 2
-
-/* Define if you have the select function.  */
-#define HAVE_SELECT 1
-
-/* Define if you have the socket function.  */
-#define HAVE_SOCKET 1
-
-/* Define if you have the strerror function.  */
-#define HAVE_STRERROR 1
-
-/* Define if you have the strtol function.  */
-#define HAVE_STRTOL 1
-
-/* Define if you have the <asm/types.h> header file.  */
-#define HAVE_ASM_TYPES_H 1
-
-/* Define if you have the <fcntl.h> header file.  */
-#define HAVE_FCNTL_H 1
-
-/* Define if you have the <getopt.h> header file.  */
-#define HAVE_GETOPT_H 1
-
-/* Define if you have the <linux/if_ether.h> header file.  */
-#define HAVE_LINUX_IF_ETHER_H 1
-
-/* Define if you have kernel-mode PPPoE in Linux file.  */
-/* #undef HAVE_LINUX_KERNEL_PPPOE */
-
-/* Define if you have the <linux/if_packet.h> header file.  */
-#define HAVE_LINUX_IF_PACKET_H 1
-
-/* Define if you have the <linux/if_pppox.h> header file.  */
-#define HAVE_LINUX_IF_PPPOX_H 1
-
-/* Define if you have the <net/bpf.h> header file.  */
-#define HAVE_NET_BPF_H 1
-
-/* Define if you have the <net/if_arp.h> header file.  */
-//#define HAVE_NET_IF_ARP_H 1
-
-/* Define if you have the <net/ethernet.h> header file.  */
-#define HAVE_NET_ETHERNET_H 1
-
-/* Define if you have the <net/if.h> header file.  */
-#define HAVE_NET_IF_H 1
-
-/* Define if you have the <linux/if.h> header file.  */
-#define HAVE_LINUX_IF_H 1
-
-/* Define if you have the <net/if_dl.h> header file.  */
-/* #undef HAVE_NET_IF_DL_H */
-
-/* Define if you have the <net/if_ether.h> header file.  */
-/* #undef HAVE_NET_IF_ETHER_H */
-
-/* Define if you have the <net/if_types.h> header file.  */
-/* #undef HAVE_NET_IF_TYPES_H */
-
-/* Define if you have the <netinet/if_ether.h> header file.  */
-//#define HAVE_NETINET_IF_ETHER_H 1
-
-/* Define if you have the <netpacket/packet.h> header file.  */
-#define HAVE_NETPACKET_PACKET_H 1
-
-/* Define if you have the <sys/cdefs.h> header file.  */
-#define HAVE_SYS_CDEFS_H 1
-
-/* Define if you have the <sys/dlpi.h> header file.  */
-/* #undef HAVE_SYS_DLPI_H */
-
-/* Define if you have the <sys/ioctl.h> header file.  */
-#define HAVE_SYS_IOCTL_H 1
-
-/* Define if you have the <sys/param.h> header file.  */
-#define HAVE_SYS_PARAM_H 1
-
-/* Define if you have the <sys/socket.h> header file.  */
-#define HAVE_SYS_SOCKET_H 1
-
-/* Define if you have the <sys/time.h> header file.  */
-#define HAVE_SYS_TIME_H 1
-
-/* Define if you have the <sys/uio.h> header file.  */
-#define HAVE_SYS_UIO_H 1
-
-/* Define if you have the <syslog.h> header file.  */
-#define HAVE_SYSLOG_H 1
-
-/* Define if you have the <unistd.h> header file.  */
-#define HAVE_UNISTD_H 1
-
-/* Define if you have the N_HDLC line discipline in linux/termios.h */
-#define HAVE_N_HDLC 1
-
-/* Define if bitfields are packed in reverse order */
-#define PACK_BITFIELDS_REVERSED 1
diff --git a/mdk-stage1/rp-pppoe/src/config.h.in b/mdk-stage1/rp-pppoe/src/config.h.in
deleted file mode 100644
index e3340389d..000000000
--- a/mdk-stage1/rp-pppoe/src/config.h.in
+++ /dev/null
@@ -1,134 +0,0 @@
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
-
-/* Define to empty if the keyword does not work.  */
-#undef const
-
-/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
-#undef HAVE_SYS_WAIT_H
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#undef pid_t
-
-/* Define as the return type of signal handlers (int or void).  */
-#undef RETSIGTYPE
-
-/* Define if the setvbuf function takes the buffering type as its second
-   argument and the buffer pointer as the third, as on System V
-   before release 3.  */
-#undef SETVBUF_REVERSED
-
-/* Define if you have the ANSI C header files.  */
-#undef STDC_HEADERS
-
-/* Define if you can safely include both <sys/time.h> and <time.h>.  */
-#undef TIME_WITH_SYS_TIME
-
-/* Define if your <sys/time.h> declares struct tm.  */
-#undef TM_IN_SYS_TIME
-
-#undef HAVE_STRUCT_SOCKADDR_LL
-
-/* The number of bytes in a unsigned int.  */
-#undef SIZEOF_UNSIGNED_INT
-
-/* The number of bytes in a unsigned long.  */
-#undef SIZEOF_UNSIGNED_LONG
-
-/* The number of bytes in a unsigned short.  */
-#undef SIZEOF_UNSIGNED_SHORT
-
-/* Define if you have the select function.  */
-#undef HAVE_SELECT
-
-/* Define if you have the socket function.  */
-#undef HAVE_SOCKET
-
-/* Define if you have the strerror function.  */
-#undef HAVE_STRERROR
-
-/* Define if you have the strtol function.  */
-#undef HAVE_STRTOL
-
-/* Define if you have the <asm/types.h> header file.  */
-#undef HAVE_ASM_TYPES_H
-
-/* Define if you have the <fcntl.h> header file.  */
-#undef HAVE_FCNTL_H
-
-/* Define if you have the <getopt.h> header file.  */
-#undef HAVE_GETOPT_H
-
-/* Define if you have the <linux/if_ether.h> header file.  */
-#undef HAVE_LINUX_IF_ETHER_H
-
-/* Define if you have kernel-mode PPPoE in Linux file.  */
-#undef HAVE_LINUX_KERNEL_PPPOE
-
-/* Define if you have the <linux/if_packet.h> header file.  */
-#undef HAVE_LINUX_IF_PACKET_H
-
-/* Define if you have the <linux/if_pppox.h> header file.  */
-#undef HAVE_LINUX_IF_PPPOX_H
-
-/* Define if you have the <net/bpf.h> header file.  */
-#undef HAVE_NET_BPF_H
-
-/* Define if you have the <net/if_arp.h> header file.  */
-#undef HAVE_NET_IF_ARP_H
-
-/* Define if you have the <net/ethernet.h> header file.  */
-#undef HAVE_NET_ETHERNET_H
-
-/* Define if you have the <net/if.h> header file.  */
-#undef HAVE_NET_IF_H
-
-/* Define if you have the <linux/if.h> header file.  */
-#undef HAVE_LINUX_IF_H
-
-/* Define if you have the <net/if_dl.h> header file.  */
-#undef HAVE_NET_IF_DL_H
-
-/* Define if you have the <net/if_ether.h> header file.  */
-#undef HAVE_NET_IF_ETHER_H
-
-/* Define if you have the <net/if_types.h> header file.  */
-#undef HAVE_NET_IF_TYPES_H
-
-/* Define if you have the <netinet/if_ether.h> header file.  */
-#undef HAVE_NETINET_IF_ETHER_H
-
-/* Define if you have the <netpacket/packet.h> header file.  */
-#undef HAVE_NETPACKET_PACKET_H
-
-/* Define if you have the <sys/cdefs.h> header file.  */
-#undef HAVE_SYS_CDEFS_H
-
-/* Define if you have the <sys/dlpi.h> header file.  */
-#undef HAVE_SYS_DLPI_H
-
-/* Define if you have the <sys/ioctl.h> header file.  */
-#undef HAVE_SYS_IOCTL_H
-
-/* Define if you have the <sys/param.h> header file.  */
-#undef HAVE_SYS_PARAM_H
-
-/* Define if you have the <sys/socket.h> header file.  */
-#undef HAVE_SYS_SOCKET_H
-
-/* Define if you have the <sys/time.h> header file.  */
-#undef HAVE_SYS_TIME_H
-
-/* Define if you have the <sys/uio.h> header file.  */
-#undef HAVE_SYS_UIO_H
-
-/* Define if you have the <syslog.h> header file.  */
-#undef HAVE_SYSLOG_H
-
-/* Define if you have the <unistd.h> header file.  */
-#undef HAVE_UNISTD_H
-
-/* Define if you have the N_HDLC line discipline in linux/termios.h */
-#undef HAVE_N_HDLC
-
-/* Define if bitfields are packed in reverse order */
-#undef PACK_BITFIELDS_REVERSED
diff --git a/mdk-stage1/rp-pppoe/src/configure b/mdk-stage1/rp-pppoe/src/configure
deleted file mode 100755
index eede451a1..000000000
--- a/mdk-stage1/rp-pppoe/src/configure
+++ /dev/null
@@ -1,2356 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_default_prefix=/usr
-ac_help="$ac_help
-  --enable-plugin=pppd_src_path   build pppd plugin"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=pppoe.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:536: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:566: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:617: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:649: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 660 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:691: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:696: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:705: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:724: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:758: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    # This must be in double quotes, not single quotes, because CPP may get
-  # substituted into the Makefile and "${CC-cc}" will confuse make.
-  CPP="${CC-cc} -E"
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp.
-  cat > conftest.$ac_ext <<EOF
-#line 773 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:779: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -E -traditional-cpp"
-  cat > conftest.$ac_ext <<EOF
-#line 790 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:796: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -nologo -E"
-  cat > conftest.$ac_ext <<EOF
-#line 807 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:813: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-  ac_cv_prog_CPP="$CPP"
-fi
-  CPP="$ac_cv_prog_CPP"
-else
-  ac_cv_prog_CPP="$CPP"
-fi
-echo "$ac_t""$CPP" 1>&6
-
-echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:838: checking for ANSI C header files" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 843 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:851: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  ac_cv_header_stdc=yes
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 868 "configure"
-#include "confdefs.h"
-#include <string.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "memchr" >/dev/null 2>&1; then
-  :
-else
-  rm -rf conftest*
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 886 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "free" >/dev/null 2>&1; then
-  :
-else
-  rm -rf conftest*
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-if test "$cross_compiling" = yes; then
-  :
-else
-  cat > conftest.$ac_ext <<EOF
-#line 907 "configure"
-#include "confdefs.h"
-#include <ctype.h>
-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int main () { int i; for (i = 0; i < 256; i++)
-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
-exit (0); }
-
-EOF
-if { (eval echo configure:918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  :
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_header_stdc=no
-fi
-rm -fr conftest*
-fi
-
-fi
-fi
-
-echo "$ac_t""$ac_cv_header_stdc" 1>&6
-if test $ac_cv_header_stdc = yes; then
-  cat >> confdefs.h <<\EOF
-#define STDC_HEADERS 1
-EOF
-
-fi
-
-echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:942: checking for sys/wait.h that is POSIX.1 compatible" >&5
-if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 947 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/wait.h>
-#ifndef WEXITSTATUS
-#define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8)
-#endif
-#ifndef WIFEXITED
-#define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
-#endif
-int main() {
-int s;
-wait (&s);
-s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
-; return 0; }
-EOF
-if { (eval echo configure:963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_header_sys_wait_h=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_header_sys_wait_h=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_header_sys_wait_h" 1>&6
-if test $ac_cv_header_sys_wait_h = yes; then
-  cat >> confdefs.h <<\EOF
-#define HAVE_SYS_WAIT_H 1
-EOF
-
-fi
-
-for ac_hdr in fcntl.h sys/ioctl.h sys/time.h syslog.h unistd.h net/if_arp.h netinet/if_ether.h getopt.h sys/uio.h sys/param.h fcntl.h net/bpf.h netpacket/packet.h net/ethernet.h asm/types.h linux/if_packet.h linux/if_ether.h linux/if_pppox.h sys/socket.h sys/cdefs.h linux/if.h net/if.h net/if_dl.h net/if_ether.h net/if_types.h netinet/if_ether.h net/if_types.h net/if_dl.h sys/dlpi.h 
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:987: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 992 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:997: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
- 
-else
-  echo "$ac_t""no" 1>&6
-fi
-done
-
-
-echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1025: checking for working const" >&5
-if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1030 "configure"
-#include "confdefs.h"
-
-int main() {
-
-/* Ultrix mips cc rejects this.  */
-typedef int charset[2]; const charset x;
-/* SunOS 4.1.1 cc rejects this.  */
-char const *const *ccp;
-char **p;
-/* NEC SVR4.0.2 mips cc rejects this.  */
-struct point {int x, y;};
-static struct point const zero = {0,0};
-/* AIX XL C 1.02.0.0 rejects this.
-   It does not let you subtract one const X* pointer from another in an arm
-   of an if-expression whose if-part is not a constant expression */
-const char *g = "string";
-ccp = &g + (g ? g-g : 0);
-/* HPUX 7.0 cc rejects these. */
-++ccp;
-p = (char**) ccp;
-ccp = (char const *const *) p;
-{ /* SCO 3.2v4 cc rejects this.  */
-  char *t;
-  char const *s = 0 ? (char *) 0 : (char const *) 0;
-
-  *t++ = 0;
-}
-{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
-  int x[] = {25, 17};
-  const int *foo = &x[0];
-  ++foo;
-}
-{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-  typedef const int *iptr;
-  iptr p = 0;
-  ++p;
-}
-{ /* AIX XL C 1.02.0.0 rejects this saying
-     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-  struct s { int j; const int *ap[3]; };
-  struct s *b; b->j = 5;
-}
-{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
-  const int foo = 10;
-}
-
-; return 0; }
-EOF
-if { (eval echo configure:1079: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_c_const=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_c_const=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_c_const" 1>&6
-if test $ac_cv_c_const = no; then
-  cat >> confdefs.h <<\EOF
-#define const 
-EOF
-
-fi
-
-echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:1100: checking for pid_t" >&5
-if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1105 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
-  rm -rf conftest*
-  ac_cv_type_pid_t=yes
-else
-  rm -rf conftest*
-  ac_cv_type_pid_t=no
-fi
-rm -f conftest*
-
-fi
-echo "$ac_t""$ac_cv_type_pid_t" 1>&6
-if test $ac_cv_type_pid_t = no; then
-  cat >> confdefs.h <<\EOF
-#define pid_t int
-EOF
-
-fi
-
-echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1133: checking whether time.h and sys/time.h may both be included" >&5
-if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1138 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/time.h>
-#include <time.h>
-int main() {
-struct tm *tp;
-; return 0; }
-EOF
-if { (eval echo configure:1147: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_header_time=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_header_time=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_header_time" 1>&6
-if test $ac_cv_header_time = yes; then
-  cat >> confdefs.h <<\EOF
-#define TIME_WITH_SYS_TIME 1
-EOF
-
-fi
-
-echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:1168: checking whether struct tm is in sys/time.h or time.h" >&5
-if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1173 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <time.h>
-int main() {
-struct tm *tp; tp->tm_sec;
-; return 0; }
-EOF
-if { (eval echo configure:1181: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_struct_tm=time.h
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_struct_tm=sys/time.h
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_struct_tm" 1>&6
-if test $ac_cv_struct_tm = sys/time.h; then
-  cat >> confdefs.h <<\EOF
-#define TM_IN_SYS_TIME 1
-EOF
-
-fi
-
-
-# Extract the first word of "echo", so it can be a program name with args.
-set dummy echo; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1205: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_ECHO'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$ECHO" in
-  /*)
-  ac_cv_path_ECHO="$ECHO" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_ECHO="$ECHO" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/ucb/bin:$PATH"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_ECHO="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_ECHO" && ac_cv_path_ECHO=""""
-  ;;
-esac
-fi
-ECHO="$ac_cv_path_ECHO"
-if test -n "$ECHO"; then
-  echo "$ac_t""$ECHO" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-$ECHO -n "checking for struct sockaddr_ll... "
-cat > conftest.$ac_ext <<EOF
-#line 1241 "configure"
-#include "confdefs.h"
-#include <asm/types.h>
-#include <linux/if_packet.h>
-#include <linux/if_ether.h>
-
-int main() {
-struct sockaddr_ll sa;
-; return 0; }
-EOF
-if { (eval echo configure:1251: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_struct_sockaddr_ll=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_struct_sockaddr_ll=no
-fi
-rm -f conftest*
-$ECHO $ac_cv_struct_sockaddr_ll
-if test "$ac_cv_struct_sockaddr_ll" = yes ; then
-cat >> confdefs.h <<\EOF
-#define HAVE_STRUCT_SOCKADDR_LL 1
-EOF
-
-fi
-
-$ECHO -n "checking for N_HDLC line discipline... "
-cat > conftest.$ac_ext <<EOF
-#line 1271 "configure"
-#include "confdefs.h"
-#include <linux/termios.h>
-int main() {
-int x = N_HDLC;
-; return 0; }
-EOF
-if { (eval echo configure:1278: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_n_hdlc=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_n_hdlc=no
-fi
-rm -f conftest*
-$ECHO $ac_cv_n_hdlc
-if test "$ac_cv_n_hdlc" = yes ; then
-cat >> confdefs.h <<\EOF
-#define HAVE_N_HDLC 1
-EOF
-
-fi
-
-# Check whether --enable-plugin or --disable-plugin was given.
-if test "${enable_plugin+set}" = set; then
-  enableval="$enable_plugin"
-  ac_cv_pluginpath=$enableval
-else
-  ac_cv_pluginpath=no
-fi
-
-
-LINUX_KERNELMODE_PLUGIN=""
-PPPD_INCDIR=""
-if test "$ac_cv_header_linux_if_pppox_h" = yes ; then
-	if test "$ac_cv_pluginpath" != no ; then
-		LINUX_KERNELMODE_PLUGIN=rp-pppoe.so
-		PPPD_INCDIR=$ac_cv_pluginpath
-	fi
-fi
-
-
-
-
-PPPOE_RELAY=""
-if test "`uname -s`" = "Linux" ; then
-	PPPOE_RELAY=pppoe-relay
-fi
-
-
-echo $ac_n "checking for 8-bit clean memcmp""... $ac_c" 1>&6
-echo "configure:1324: checking for 8-bit clean memcmp" >&5
-if eval "test \"`echo '$''{'ac_cv_func_memcmp_clean'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-  ac_cv_func_memcmp_clean=no
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1332 "configure"
-#include "confdefs.h"
-
-main()
-{
-  char c0 = 0x40, c1 = 0x80, c2 = 0x81;
-  exit(memcmp(&c0, &c2, 1) < 0 && memcmp(&c1, &c2, 1) < 0 ? 0 : 1);
-}
-
-EOF
-if { (eval echo configure:1342: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_func_memcmp_clean=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_func_memcmp_clean=no
-fi
-rm -fr conftest*
-fi
-
-fi
-
-echo "$ac_t""$ac_cv_func_memcmp_clean" 1>&6
-test $ac_cv_func_memcmp_clean = no && LIBOBJS="$LIBOBJS memcmp.${ac_objext}"
-
-echo $ac_n "checking whether setvbuf arguments are reversed""... $ac_c" 1>&6
-echo "configure:1360: checking whether setvbuf arguments are reversed" >&5
-if eval "test \"`echo '$''{'ac_cv_func_setvbuf_reversed'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1368 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-/* If setvbuf has the reversed format, exit 0. */
-main () {
-  /* This call has the arguments reversed.
-     A reversed system may check and see that the address of main
-     is not _IOLBF, _IONBF, or _IOFBF, and return nonzero.  */
-  if (setvbuf(stdout, _IOLBF, (char *) main, BUFSIZ) != 0)
-    exit(1);
-  putc('\r', stdout);
-  exit(0);			/* Non-reversed systems segv here.  */
-}
-EOF
-if { (eval echo configure:1382: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_func_setvbuf_reversed=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_func_setvbuf_reversed=no
-fi
-rm -fr conftest*
-fi
-
-rm -f core core.* *.core
-fi
-
-echo "$ac_t""$ac_cv_func_setvbuf_reversed" 1>&6
-if test $ac_cv_func_setvbuf_reversed = yes; then
-  cat >> confdefs.h <<\EOF
-#define SETVBUF_REVERSED 1
-EOF
-
-fi
-
-echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:1406: checking return type of signal handlers" >&5
-if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1411 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <signal.h>
-#ifdef signal
-#undef signal
-#endif
-#ifdef __cplusplus
-extern "C" void (*signal (int, void (*)(int)))(int);
-#else
-void (*signal ()) ();
-#endif
-
-int main() {
-int i;
-; return 0; }
-EOF
-if { (eval echo configure:1428: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_type_signal=void
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_type_signal=int
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_type_signal" 1>&6
-cat >> confdefs.h <<EOF
-#define RETSIGTYPE $ac_cv_type_signal
-EOF
-
-
-for ac_func in select socket strerror strtol
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1449: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1454 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func(); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:1477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
- 
-else
-  echo "$ac_t""no" 1>&6
-fi
-done
-
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1532: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking size of unsigned short""... $ac_c" 1>&6
-echo "configure:1586: checking size of unsigned short" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_unsigned_short'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1594 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
-{
-  FILE *f=fopen("conftestval", "w");
-  if (!f) exit(1);
-  fprintf(f, "%d\n", sizeof(unsigned short));
-  exit(0);
-}
-EOF
-if { (eval echo configure:1605: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_sizeof_unsigned_short=`cat conftestval`
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_sizeof_unsigned_short=0
-fi
-rm -fr conftest*
-fi
-
-fi
-echo "$ac_t""$ac_cv_sizeof_unsigned_short" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_UNSIGNED_SHORT $ac_cv_sizeof_unsigned_short
-EOF
-
-
-echo $ac_n "checking size of unsigned int""... $ac_c" 1>&6
-echo "configure:1625: checking size of unsigned int" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_unsigned_int'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1633 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
-{
-  FILE *f=fopen("conftestval", "w");
-  if (!f) exit(1);
-  fprintf(f, "%d\n", sizeof(unsigned int));
-  exit(0);
-}
-EOF
-if { (eval echo configure:1644: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_sizeof_unsigned_int=`cat conftestval`
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_sizeof_unsigned_int=0
-fi
-rm -fr conftest*
-fi
-
-fi
-echo "$ac_t""$ac_cv_sizeof_unsigned_int" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_UNSIGNED_INT $ac_cv_sizeof_unsigned_int
-EOF
-
-
-echo $ac_n "checking size of unsigned long""... $ac_c" 1>&6
-echo "configure:1664: checking size of unsigned long" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_unsigned_long'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1672 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
-{
-  FILE *f=fopen("conftestval", "w");
-  if (!f) exit(1);
-  fprintf(f, "%d\n", sizeof(unsigned long));
-  exit(0);
-}
-EOF
-if { (eval echo configure:1683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_sizeof_unsigned_long=`cat conftestval`
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_sizeof_unsigned_long=0
-fi
-rm -fr conftest*
-fi
-
-fi
-echo "$ac_t""$ac_cv_sizeof_unsigned_long" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_UNSIGNED_LONG $ac_cv_sizeof_unsigned_long
-EOF
-
-
-
-# Extract the first word of "pppd", so it can be a program name with args.
-set dummy pppd; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1706: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_PPPD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$PPPD" in
-  /*)
-  ac_cv_path_PPPD="$PPPD" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_PPPD="$PPPD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH:/sbin:/usr/sbin:/usr/local/sbin"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_PPPD="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_PPPD" && ac_cv_path_PPPD="NOTFOUND"
-  ;;
-esac
-fi
-PPPD="$ac_cv_path_PPPD"
-if test -n "$PPPD"; then
-  echo "$ac_t""$PPPD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-# Extract the first word of "setsid", so it can be a program name with args.
-set dummy setsid; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1743: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_SETSID'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$SETSID" in
-  /*)
-  ac_cv_path_SETSID="$SETSID" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_SETSID="$SETSID" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH:/sbin:/usr/sbin:/usr/local/sbin"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_SETSID="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_SETSID" && ac_cv_path_SETSID=""""
-  ;;
-esac
-fi
-SETSID="$ac_cv_path_SETSID"
-if test -n "$SETSID"; then
-  echo "$ac_t""$SETSID" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-# Extract the first word of "id", so it can be a program name with args.
-set dummy id; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1780: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_ID'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$ID" in
-  /*)
-  ac_cv_path_ID="$ID" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_ID="$ID" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/xpg4/bin:$PATH"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_ID="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_ID" && ac_cv_path_ID=""""
-  ;;
-esac
-fi
-ID="$ac_cv_path_ID"
-if test -n "$ID"; then
-  echo "$ac_t""$ID" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-$ECHO -n "checking for Linux 2.4.X kernel-mode PPPoE support..."
-if test "`uname -s`" = "Linux" ; then
-if test "$cross_compiling" = yes; then
-    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1820 "configure"
-#include "confdefs.h"
-#include <sys/socket.h>
-#include <net/ethernet.h>
-#include <linux/if.h>
-#include <linux/if_pppox.h>
-int main()
-{
-	if (socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OE) >= 0) return 0; else return 1;
-}
-
-EOF
-if { (eval echo configure:1832: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_linux_kernel_pppoe=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_linux_kernel_pppoe=no
-fi
-rm -fr conftest*
-fi
-
-else
-	ac_cv_linux_kernel_pppoe=no
-fi
-
-$ECHO $ac_cv_linux_kernel_pppoe
-if test "$ac_cv_linux_kernel_pppoe" = yes ; then
-    cat >> confdefs.h <<\EOF
-#define HAVE_LINUX_KERNEL_PPPOE 1
-EOF
-
-fi
-
-if test "$GCC" = yes; then
-	CFLAGS="$CFLAGS -Wall -Wstrict-prototypes -ansi -pedantic"
-fi
-
-if test "$PPPD" = "NOTFOUND"; then
-	$ECHO ""
-	$ECHO "*** Oops!  I couldn't find pppd, the PPP daemon anywhere."
-	$ECHO "*** You must install pppd, version 2.3.10 or later."
-	$ECHO "*** I will keep going, but it may not work."
-	$ECHO ""
-fi
-
-
-PPPD_VERSION=`$PPPD --version 2>&1 | awk '{print $NF}'`
-
-case "$PPPD_VERSION" in
-1.*|2.0.*|2.1.*|2.2.*|2.3.0|2.3.1|2.3.2|2.3.3|2.3.4|2.3.5|2.3.6)
-	$ECHO ""
-	$ECHO "*** Oops! Your version of pppd is $PPPD_VERSION, which is too old."
-	$ECHO "*** You need at least 2.3.7 (2.3.10 or newer recommended.)"
-	$ECHO "*** I will keep going, but it may not work."
-	$ECHO ""
-	;;
-
-2.3.7|2.3.8|2.3.9)
-	$ECHO ""
-	$ECHO "*** Warning.  Your version of pppd is $PPPD_VERSION.  You will"
-	$ECHO "*** not be able to use connect-on-demand.  Upgrade to pppd"
-	$ECHO "*** 2.3.10 or newer if you need connect-on-demand."
-	$ECHO ""
-	;;
-
-2*|3*|4*|5*|6*|7*|8*|9*)
-	;;
-
-*)
-	$ECHO ""
-	$ECHO "*** Oops.  I cannot figure out what version of pppd you have."
-	$ECHO "*** All I got back was '$PPPD_VERSION'"
-	$ECHO "*** I will keep going, but it may not work."
-	$ECHO ""
-	;;
-esac
-
-$ECHO -n "checking packing order of bit fields... "
-if test "$cross_compiling" = yes; then
-    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1905 "configure"
-#include "confdefs.h"
-
-union foo {
-    struct bar {
-	unsigned int ver:4;
-	unsigned int type:4;
-    } bb;
-    unsigned char baz;
-};
-
-int
-main(void)
-{
-    union foo x;
-    x.bb.ver = 1;
-    x.bb.type = 2;
-    if (x.baz == 0x21) {
-	return 1;
-    } else if (x.baz == 0x12) {
-	return 0;
-    } else {
-	return 2;
-    }
-}
-EOF
-if { (eval echo configure:1931: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  PACK=normal
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  PACK=rev
-fi
-rm -fr conftest*
-fi
-
-
-if test "$PACK" = "rev" ; then
-	$ECHO "reversed"
-	cat >> confdefs.h <<\EOF
-#define PACK_BITFIELDS_REVERSED 1
-EOF
-
-else
-	$ECHO "normal"
-fi
-
-# Sigh... got to fix this up for tcl
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Fully resolve WRAPPER for Tcl script.
-WRAPPER=${sbindir}/pppoe-wrapper
-eval "WRAPPER=${WRAPPER}"
-eval "WRAPPER=${WRAPPER}"
-
-
-# Determine what targets to build
-TARGETS="pppoe pppoe-server"
-
-# pppoe-sniff is built only on Linux and Solaris
-if test "$ac_cv_header_linux_if_packet_h" = "yes" -o "$ac_cv_header_sys_dlpi_h" = "yes" ; then
-	TARGETS="$TARGETS pppoe-sniff"
-fi
-
-# pppoe-relay is built only on Linux
-if test "$ac_cv_header_linux_if_packet_h" = "yes" ; then
-	TARGETS="$TARGETS pppoe-relay"
-fi
-
-# plugin is built only if we have kernel support
-if test -n "$LINUX_KERNELMODE_PLUGIN" ; then
-	TARGETS="$TARGETS $LINUX_KERNELMODE_PLUGIN"
-fi
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-DEFS=-DHAVE_CONFIG_H
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile ../scripts/adsl-connect ../scripts/adsl-start ../scripts/adsl-stop ../scripts/adsl-init ../scripts/adsl-init-suse ../scripts/adsl-init-turbolinux ../scripts/adsl-setup ../gui/Makefile ../gui/tkpppoe config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@CC@%$CC%g
-s%@CPP@%$CPP%g
-s%@ECHO@%$ECHO%g
-s%@LINUX_KERNELMODE_PLUGIN@%$LINUX_KERNELMODE_PLUGIN%g
-s%@PPPD_INCDIR@%$PPPD_INCDIR%g
-s%@PPPOE_RELAY@%$PPPOE_RELAY%g
-s%@LIBOBJS@%$LIBOBJS%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PPPD@%$PPPD%g
-s%@SETSID@%$SETSID%g
-s%@ID@%$ID%g
-s%@WRAPPER@%$WRAPPER%g
-s%@TARGETS@%$TARGETS%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile ../scripts/adsl-connect ../scripts/adsl-start ../scripts/adsl-stop ../scripts/adsl-init ../scripts/adsl-init-suse ../scripts/adsl-init-turbolinux ../scripts/adsl-setup ../gui/Makefile ../gui/tkpppoe"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
-ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
-ac_dC='\3'
-ac_dD='%g'
-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
-ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_uB='\([ 	]\)%\1#\2define\3'
-ac_uC=' '
-ac_uD='\4%g'
-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_eB='$%\1#\2define\3'
-ac_eC=' '
-ac_eD='%g'
-
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
-  CONFIG_HEADERS="config.h"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  echo creating $ac_file
-
-  rm -f conftest.frag conftest.in conftest.out
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  cat $ac_file_inputs > conftest.in
-
-EOF
-
-# Transform confdefs.h into a sed script conftest.vals that substitutes
-# the proper values into config.h.in to produce config.h.  And first:
-# Protect against being on the right side of a sed subst in config.status.
-# Protect against being in an unquoted here document in config.status.
-rm -f conftest.vals
-cat > conftest.hdr <<\EOF
-s/[\\&%]/\\&/g
-s%[\\$`]%\\&%g
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
-s%ac_d%ac_u%gp
-s%ac_u%ac_e%gp
-EOF
-sed -n -f conftest.hdr confdefs.h > conftest.vals
-rm -f conftest.hdr
-
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >> conftest.vals <<\EOF
-s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
-EOF
-
-# Break up conftest.vals because some shells have a limit on
-# the size of here documents, and old seds have small limits too.
-
-rm -f conftest.tail
-while :
-do
-  ac_lines=`grep -c . conftest.vals`
-  # grep -c gives empty output for an empty file on some AIX systems.
-  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
-  # Write a limited-size here document to conftest.frag.
-  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
-  echo 'CEOF
-  sed -f conftest.frag conftest.in > conftest.out
-  rm -f conftest.in
-  mv conftest.out conftest.in
-' >> $CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
-  rm -f conftest.vals
-  mv conftest.tail conftest.vals
-done
-rm -f conftest.vals
-
-cat >> $CONFIG_STATUS <<\EOF
-  rm -f conftest.frag conftest.h
-  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
-  cat conftest.in >> conftest.h
-  rm -f conftest.in
-  if cmp -s $ac_file conftest.h 2>/dev/null; then
-    echo "$ac_file is unchanged"
-    rm -f conftest.h
-  else
-    # Remove last slash and all that follows it.  Not all systems have dirname.
-      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-      # The file is in a subdirectory.
-      test ! -d "$ac_dir" && mkdir "$ac_dir"
-    fi
-    rm -f $ac_file
-    mv conftest.h $ac_file
-  fi
-fi; done
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-
-$ECHO ""
-$ECHO "On this platform, the following targets will be built:"
-$ECHO "        $TARGETS"
-$ECHO ""
-$ECHO "Type 'make' to compile the software."
diff --git a/mdk-stage1/rp-pppoe/src/configure.in b/mdk-stage1/rp-pppoe/src/configure.in
deleted file mode 100644
index c11690179..000000000
--- a/mdk-stage1/rp-pppoe/src/configure.in
+++ /dev/null
@@ -1,231 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-AC_INIT(pppoe.c)
-
-AC_CONFIG_HEADER(config.h)
-
-AC_PREFIX_DEFAULT(/usr)
-
-dnl Checks for programs.
-AC_PROG_CC
-
-dnl Checks for libraries.
-
-dnl Checks for header files.
-AC_HEADER_STDC
-AC_HEADER_SYS_WAIT
-AC_CHECK_HEADERS(fcntl.h sys/ioctl.h sys/time.h syslog.h unistd.h net/if_arp.h netinet/if_ether.h getopt.h sys/uio.h sys/param.h fcntl.h net/bpf.h netpacket/packet.h net/ethernet.h asm/types.h linux/if_packet.h linux/if_ether.h linux/if_pppox.h sys/socket.h sys/cdefs.h linux/if.h net/if.h net/if_dl.h net/if_ether.h net/if_types.h netinet/if_ether.h net/if_types.h net/if_dl.h sys/dlpi.h )
-
-dnl Checks for typedefs, structures, and compiler characteristics.
-AC_C_CONST
-AC_TYPE_PID_T
-AC_HEADER_TIME
-AC_STRUCT_TM
-
-dnl Check for an echo which supports -n -- another hack for Solaris
-AC_PATH_PROG(ECHO, echo, "", /usr/ucb/bin:$PATH)
-
-dnl Check for sockaddr_ll
-$ECHO -n "checking for struct sockaddr_ll... "
-AC_TRY_COMPILE([#include <asm/types.h>
-#include <linux/if_packet.h>
-#include <linux/if_ether.h>
-], [struct sockaddr_ll sa;],
-ac_cv_struct_sockaddr_ll=yes, ac_cv_struct_sockaddr_ll=no)
-$ECHO $ac_cv_struct_sockaddr_ll
-if test "$ac_cv_struct_sockaddr_ll" = yes ; then
-AC_DEFINE(HAVE_STRUCT_SOCKADDR_LL)
-fi
-
-dnl Check for N_HDLC line discipline
-$ECHO -n "checking for N_HDLC line discipline... "
-AC_TRY_COMPILE([#include <linux/termios.h>],
-	[int x = N_HDLC;],
-	ac_cv_n_hdlc=yes, ac_cv_n_hdlc=no)
-$ECHO $ac_cv_n_hdlc
-if test "$ac_cv_n_hdlc" = yes ; then
-AC_DEFINE(HAVE_N_HDLC)
-fi
-
-AC_ARG_ENABLE(plugin, [  --enable-plugin=pppd_src_path   build pppd plugin], ac_cv_pluginpath=$enableval, ac_cv_pluginpath=no)
-
-dnl Determine whether or not to build Linux pppd plugin
-LINUX_KERNELMODE_PLUGIN=""
-PPPD_INCDIR=""
-if test "$ac_cv_header_linux_if_pppox_h" = yes ; then
-	if test "$ac_cv_pluginpath" != no ; then
-		LINUX_KERNELMODE_PLUGIN=rp-pppoe.so
-		PPPD_INCDIR=$ac_cv_pluginpath
-	fi
-fi
-
-AC_SUBST(LINUX_KERNELMODE_PLUGIN)
-AC_SUBST(PPPD_INCDIR)
-
-dnl Determine whether or not to build PPPoE relay
-PPPOE_RELAY=""
-if test "`uname -s`" = "Linux" ; then
-	PPPOE_RELAY=pppoe-relay
-fi
-AC_SUBST(PPPOE_RELAY)
-
-dnl Checks for library functions.
-AC_FUNC_MEMCMP
-AC_FUNC_SETVBUF_REVERSED
-AC_TYPE_SIGNAL
-AC_CHECK_FUNCS(select socket strerror strtol)
-AC_PROG_INSTALL
-
-dnl Integer sizes
-AC_CHECK_SIZEOF(unsigned short)
-AC_CHECK_SIZEOF(unsigned int)
-AC_CHECK_SIZEOF(unsigned long)
-
-dnl Check for location of pppd
-AC_PATH_PROG(PPPD, pppd, NOTFOUND, $PATH:/sbin:/usr/sbin:/usr/local/sbin)
-
-dnl Check for setsid (probably Linux-specific)
-AC_PATH_PROG(SETSID, setsid, "", $PATH:/sbin:/usr/sbin:/usr/local/sbin)
-
-dnl Check for an "id" which accepts "-u" option -- hack for Solaris.
-AC_PATH_PROG(ID, id, "", /usr/xpg4/bin:$PATH)
-
-dnl Check for Linux-specific kernel support for PPPoE
-$ECHO -n "checking for Linux 2.4.X kernel-mode PPPoE support..."
-if test "`uname -s`" = "Linux" ; then
-AC_TRY_RUN([#include <sys/socket.h>
-#include <net/ethernet.h>
-#include <linux/if.h>
-#include <linux/if_pppox.h>
-int main()
-{
-	if (socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OE) >= 0) return 0; else return 1;
-}
-], ac_cv_linux_kernel_pppoe=yes, ac_cv_linux_kernel_pppoe=no)
-else
-	ac_cv_linux_kernel_pppoe=no
-fi
-
-$ECHO $ac_cv_linux_kernel_pppoe
-if test "$ac_cv_linux_kernel_pppoe" = yes ; then
-    AC_DEFINE(HAVE_LINUX_KERNEL_PPPOE)
-fi
-
-dnl GCC warning level
-if test "$GCC" = yes; then
-	CFLAGS="$CFLAGS -Wall -Wstrict-prototypes"
-fi
-
-dnl If we couldn't find pppd, die
-if test "$PPPD" = "NOTFOUND"; then
-	$ECHO ""
-	$ECHO "*** Oops!  I couldn't find pppd, the PPP daemon anywhere."
-	$ECHO "*** You must install pppd, version 2.3.10 or later."
-	$ECHO "*** I will keep going, but it may not work."
-	$ECHO ""
-fi
-
-dnl Figure out pppd version.  2.3.7 to 2.3.9 -- issue warning.  Less than
-dnl 2.3.7 -- stop
-
-PPPD_VERSION=`$PPPD --version 2>&1 | awk '{print $NF}'`
-
-case "$PPPD_VERSION" in
-1.*|2.0.*|2.1.*|2.2.*|2.3.0|2.3.1|2.3.2|2.3.3|2.3.4|2.3.5|2.3.6)
-	$ECHO ""
-	$ECHO "*** Oops! Your version of pppd is $PPPD_VERSION, which is too old."
-	$ECHO "*** You need at least 2.3.7 (2.3.10 or newer recommended.)"
-	$ECHO "*** I will keep going, but it may not work."
-	$ECHO ""
-	;;
-
-2.3.7|2.3.8|2.3.9)
-	$ECHO ""
-	$ECHO "*** Warning.  Your version of pppd is $PPPD_VERSION.  You will"
-	$ECHO "*** not be able to use connect-on-demand.  Upgrade to pppd"
-	$ECHO "*** 2.3.10 or newer if you need connect-on-demand."
-	$ECHO ""
-	;;
-
-2*|3*|4*|5*|6*|7*|8*|9*)
-	;;
-
-*)
-	$ECHO ""
-	$ECHO "*** Oops.  I cannot figure out what version of pppd you have."
-	$ECHO "*** All I got back was '$PPPD_VERSION'"
-	$ECHO "*** I will keep going, but it may not work."
-	$ECHO ""
-	;;
-esac
-
-dnl Figure out packing order of structures
-$ECHO -n "checking packing order of bit fields... "
-AC_TRY_RUN([
-union foo {
-    struct bar {
-	unsigned int ver:4;
-	unsigned int type:4;
-    } bb;
-    unsigned char baz;
-};
-
-int
-main(void)
-{
-    union foo x;
-    x.bb.ver = 1;
-    x.bb.type = 2;
-    if (x.baz == 0x21) {
-	return 1;
-    } else if (x.baz == 0x12) {
-	return 0;
-    } else {
-	return 2;
-    }
-}], PACK=normal, PACK=rev)
-
-if test "$PACK" = "rev" ; then
-	$ECHO "reversed"
-	AC_DEFINE(PACK_BITFIELDS_REVERSED)
-else
-	$ECHO "normal"
-fi
-
-# Sigh... got to fix this up for tcl
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Fully resolve WRAPPER for Tcl script.
-WRAPPER=${sbindir}/pppoe-wrapper
-eval "WRAPPER=${WRAPPER}"
-eval "WRAPPER=${WRAPPER}"
-AC_SUBST(WRAPPER)
-
-# Determine what targets to build
-TARGETS="pppoe pppoe-server"
-
-# pppoe-sniff is built only on Linux and Solaris
-if test "$ac_cv_header_linux_if_packet_h" = "yes" -o "$ac_cv_header_sys_dlpi_h" = "yes" ; then
-	TARGETS="$TARGETS pppoe-sniff"
-fi
-
-# pppoe-relay is built only on Linux
-if test "$ac_cv_header_linux_if_packet_h" = "yes" ; then
-	TARGETS="$TARGETS pppoe-relay"
-fi
-
-# plugin is built only if we have kernel support
-if test -n "$LINUX_KERNELMODE_PLUGIN" ; then
-	TARGETS="$TARGETS $LINUX_KERNELMODE_PLUGIN"
-fi
-
-AC_SUBST(TARGETS)
-
-AC_OUTPUT(Makefile ../scripts/adsl-connect ../scripts/adsl-start ../scripts/adsl-stop ../scripts/adsl-init ../scripts/adsl-init-suse ../scripts/adsl-init-turbolinux ../scripts/adsl-setup ../gui/Makefile ../gui/tkpppoe)
-
-$ECHO ""
-$ECHO "On this platform, the following targets will be built:"
-$ECHO "        $TARGETS"
-$ECHO ""
-$ECHO "Type 'make' to compile the software."
diff --git a/mdk-stage1/rp-pppoe/src/debug.c b/mdk-stage1/rp-pppoe/src/debug.c
deleted file mode 100644
index 052dca6c7..000000000
--- a/mdk-stage1/rp-pppoe/src/debug.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/***********************************************************************
-*
-* debug.c
-*
-* Implementation of user-space PPPoE redirector for Linux.
-*
-* Functions for printing debugging information
-*
-* Copyright (C) 2000 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-#include <sys/time.h>
-#include <time.h>
-#include <unistd.h>
-#include <ctype.h>
-
-/**********************************************************************
-*%FUNCTION: dumpHex
-*%ARGUMENTS:
-* fp -- file to dump to
-* buf -- buffer to dump
-* len -- length of data
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Dumps buffer to fp in an easy-to-read format
-***********************************************************************/
-void
-dumpHex(FILE *fp, unsigned char const *buf, int len)
-{
-    int i;
-    int base;
-
-    if (!fp) return;
-
-    /* do NOT dump PAP packets */
-    if (len >= 2 && buf[0] == 0xC0 && buf[1] == 0x23) {
-	fprintf(fp, "(PAP Authentication Frame -- Contents not dumped)\n");
-	return;
-    }
-
-    for (base=0; base<len; base += 16) {
-	for (i=base; i<base+16; i++) {
-	    if (i < len) {
-		fprintf(fp, "%02x ", (unsigned) buf[i]);
-	    } else {
-		fprintf(fp, "   ");
-	    }
-	}
-	fprintf(fp, "  ");
-	for (i=base; i<base+16; i++) {
-	    if (i < len) {
-		if (isprint(buf[i])) {
-		    fprintf(fp, "%c", buf[i]);
-		} else {
-		    fprintf(fp, ".");
-		}
-	    } else {
-		break;
-	    }
-	}
-	fprintf(fp, "\n");
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: dumpPacket
-*%ARGUMENTS:
-* fp -- file to dump to
-* packet -- a PPPoE packet
-* dir -- either SENT or RCVD
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Dumps the PPPoE packet to fp in an easy-to-read format
-***********************************************************************/
-void
-dumpPacket(FILE *fp, PPPoEPacket *packet, char const *dir)
-{
-    int len = ntohs(packet->length);
-
-    /* Sheesh... printing times is a pain... */
-    struct timeval tv;
-    time_t now;
-    int millisec;
-    struct tm *lt;
-    char timebuf[256];
-
-    UINT16_t type = etherType(packet);
-    if (!fp) return;
-    gettimeofday(&tv, NULL);
-    now = (time_t) tv.tv_sec;
-    millisec = tv.tv_usec / 1000;
-    lt = localtime(&now);
-    strftime(timebuf, 256, "%H:%M:%S", lt);
-    fprintf(fp, "%s.%03d %s PPPoE ", timebuf, millisec, dir);
-    if (type == Eth_PPPOE_Discovery) {
-	fprintf(fp, "Discovery (%x) ", (unsigned) type);
-    } else if (type == Eth_PPPOE_Session) {
-	fprintf(fp, "Session (%x) ", (unsigned) type);
-    } else {
-	fprintf(fp, "Unknown (%x) ", (unsigned) type);
-    }
-
-    switch(packet->code) {
-    case CODE_PADI: fprintf(fp, "PADI "); break;
-    case CODE_PADO: fprintf(fp, "PADO "); break;
-    case CODE_PADR: fprintf(fp, "PADR "); break;
-    case CODE_PADS: fprintf(fp, "PADS "); break;
-    case CODE_PADT: fprintf(fp, "PADT "); break;
-    case CODE_SESS: fprintf(fp, "SESS "); break;
-    }
-
-    fprintf(fp, "sess-id %d length %d\n",
-	    (int) ntohs(packet->session),
-	    len);
-
-    /* Ugly... I apologize... */
-    fprintf(fp,
-	    "SourceAddr %02x:%02x:%02x:%02x:%02x:%02x "
-	    "DestAddr %02x:%02x:%02x:%02x:%02x:%02x\n",
-	    (unsigned) packet->ethHdr.h_source[0],
-	    (unsigned) packet->ethHdr.h_source[1],
-	    (unsigned) packet->ethHdr.h_source[2],
-	    (unsigned) packet->ethHdr.h_source[3],
-	    (unsigned) packet->ethHdr.h_source[4],
-	    (unsigned) packet->ethHdr.h_source[5],
-	    (unsigned) packet->ethHdr.h_dest[0],
-	    (unsigned) packet->ethHdr.h_dest[1],
-	    (unsigned) packet->ethHdr.h_dest[2],
-	    (unsigned) packet->ethHdr.h_dest[3],
-	    (unsigned) packet->ethHdr.h_dest[4],
-	    (unsigned) packet->ethHdr.h_dest[5]);
-    dumpHex(fp, packet->payload, ntohs(packet->length));
-}
diff --git a/mdk-stage1/rp-pppoe/src/discovery.c b/mdk-stage1/rp-pppoe/src/discovery.c
deleted file mode 100644
index fc3568db5..000000000
--- a/mdk-stage1/rp-pppoe/src/discovery.c
+++ /dev/null
@@ -1,629 +0,0 @@
-/***********************************************************************
-*
-* discovery.c
-*
-* Perform PPPoE discovery
-*
-* Copyright (C) 1999 by Roaring Penguin Software Inc.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#include <string.h>
-#include <stdlib.h>
-#include <errno.h>
-
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
-#endif
-
-#ifdef HAVE_SYS_UIO_H
-#include <sys/uio.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef USE_LINUX_PACKET
-#include <sys/ioctl.h>
-#include <fcntl.h>
-#endif
-
-#include <signal.h>
-
-/**********************************************************************
-*%FUNCTION: parseForHostUniq
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data.
-* extra -- user-supplied pointer.  This is assumed to be a pointer to int.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* If a HostUnique tag is found which matches our PID, sets *extra to 1.
-***********************************************************************/
-void
-parseForHostUniq(UINT16_t type, UINT16_t len, unsigned char *data,
-		 void *extra)
-{
-    int *val = (int *) extra;
-    if (type == TAG_HOST_UNIQ && len == sizeof(pid_t)) {
-	pid_t tmp;
-	memcpy(&tmp, data, len);
-	if (tmp == getpid()) {
-	    *val = 1;
-	}
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: packetIsForMe
-*%ARGUMENTS:
-* conn -- PPPoE connection info
-* packet -- a received PPPoE packet
-*%RETURNS:
-* 1 if packet is for this PPPoE daemon; 0 otherwise.
-*%DESCRIPTION:
-* If we are using the Host-Unique tag, verifies that packet contains
-* our unique identifier.
-***********************************************************************/
-int
-packetIsForMe(PPPoEConnection *conn, PPPoEPacket *packet)
-{
-    int forMe = 0;
-
-    /* If we're not using the Host-Unique tag, then accept the packet */
-    if (!conn->useHostUniq) return 1;
-
-    parsePacket(packet, parseForHostUniq, &forMe);
-    return forMe;
-}
-
-/**********************************************************************
-*%FUNCTION: parsePADOTags
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data.  Should point to a PacketCriteria structure
-*          which gets filled in according to selected AC name and service
-*          name.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks interesting tags out of a PADO packet
-***********************************************************************/
-void
-parsePADOTags(UINT16_t type, UINT16_t len, unsigned char *data,
-	      void *extra)
-{
-    struct PacketCriteria *pc = (struct PacketCriteria *) extra;
-    PPPoEConnection *conn = pc->conn;
-    int i;
-
-    switch(type) {
-    case TAG_AC_NAME:
-	if (conn->printACNames) {
-	    printf("Access-Concentrator: %.*s\n", (int) len, data);
-	}
-	if (conn->acName && len == strlen(conn->acName) &&
-	    !strncmp((char *) data, conn->acName, len)) {
-	    pc->acNameOK = 1;
-	}
-	break;
-    case TAG_SERVICE_NAME:
-	if (conn->printACNames && len > 0) {
-	    printf("       Service-Name: %.*s\n", (int) len, data);
-	}
-	if (conn->serviceName && len == strlen(conn->serviceName) &&
-	    !strncmp((char *) data, conn->serviceName, len)) {
-	    pc->serviceNameOK = 1;
-	}
-	break;
-    case TAG_AC_COOKIE:
-	if (conn->printACNames) {
-	    printf("Got a cookie:");
-	    /* Print first 20 bytes of cookie */
-	    for (i=0; i<len && i < 20; i++) {
-		printf(" %02x", (unsigned) data[i]);
-	    }
-	    if (i < len) printf("...");
-	    printf("\n");
-	}
-	conn->cookie.type = htons(type);
-	conn->cookie.length = htons(len);
-	memcpy(conn->cookie.payload, data, len);
-	break;
-    case TAG_RELAY_SESSION_ID:
-	if (conn->printACNames) {
-	    printf("Got a Relay-ID:");
-	    /* Print first 20 bytes of relay ID */
-	    for (i=0; i<len && i < 20; i++) {
-		printf(" %02x", (unsigned) data[i]);
-	    }
-	    if (i < len) printf("...");
-	    printf("\n");
-	}
-	conn->relayId.type = htons(type);
-	conn->relayId.length = htons(len);
-	memcpy(conn->relayId.payload, data, len);
-	break;
-    case TAG_SERVICE_NAME_ERROR:
-	if (conn->printACNames) {
-	    printf("Got a Service-Name-Error tag: %.*s\n", (int) len, data);
-	} else {
-	    syslog(LOG_ERR, "PADO: Service-Name-Error: %.*s", (int) len, data);
-	    exit(1);
-	}
-	break;
-    case TAG_AC_SYSTEM_ERROR:
-	if (conn->printACNames) {
-	    printf("Got a System-Error tag: %.*s\n", (int) len, data);
-	} else {
-	    syslog(LOG_ERR, "PADO: System-Error: %.*s", (int) len, data);
-	    exit(1);
-	}
-	break;
-    case TAG_GENERIC_ERROR:
-	if (conn->printACNames) {
-	    printf("Got a Generic-Error tag: %.*s\n", (int) len, data);
-	} else {
-	    syslog(LOG_ERR, "PADO: Generic-Error: %.*s", (int) len, data);
-	    exit(1);
-	}
-	break;
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: parsePADSTags
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data (pointer to PPPoEConnection structure)
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks interesting tags out of a PADS packet
-***********************************************************************/
-void
-parsePADSTags(UINT16_t type, UINT16_t len, unsigned char *data,
-	      void *extra)
-{
-    PPPoEConnection *conn = (PPPoEConnection *) extra;
-    switch(type) {
-    case TAG_SERVICE_NAME:
-	syslog(LOG_DEBUG, "PADS: Service-Name: '%.*s'", (int) len, data);
-	break;
-    case TAG_SERVICE_NAME_ERROR:
-	syslog(LOG_ERR, "PADS: Service-Name-Error: %.*s", (int) len, data);
-	fprintf(stderr, "PADS: Service-Name-Error: %.*s\n", (int) len, data);
-	exit(1);
-    case TAG_AC_SYSTEM_ERROR:
-	syslog(LOG_ERR, "PADS: System-Error: %.*s", (int) len, data);
-	fprintf(stderr, "PADS: System-Error: %.*s\n", (int) len, data);
-	exit(1);
-    case TAG_GENERIC_ERROR:
-	syslog(LOG_ERR, "PADS: Generic-Error: %.*s", (int) len, data);
-	fprintf(stderr, "PADS: Generic-Error: %.*s\n", (int) len, data);
-	exit(1);
-    case TAG_RELAY_SESSION_ID:
-	conn->relayId.type = htons(type);
-	conn->relayId.length = htons(len);
-	memcpy(conn->relayId.payload, data, len);
-	break;
-    }
-}
-
-/***********************************************************************
-*%FUNCTION: sendPADI
-*%ARGUMENTS:
-* conn -- PPPoEConnection structure
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADI packet
-***********************************************************************/
-void
-sendPADI(PPPoEConnection *conn)
-{
-    PPPoEPacket packet;
-    unsigned char *cursor = packet.payload;
-    PPPoETag *svc = (PPPoETag *) (&packet.payload);
-    UINT16_t namelen = 0;
-    UINT16_t plen;
-
-    if (conn->serviceName) {
-	namelen = (UINT16_t) strlen(conn->serviceName);
-    }
-    plen = TAG_HDR_SIZE + namelen;
-    CHECK_ROOM(cursor, packet.payload, plen);
-
-    /* Set destination to Ethernet broadcast address */
-    memset(packet.ethHdr.h_dest, 0xFF, ETH_ALEN);
-    memcpy(packet.ethHdr.h_source, conn->myEth, ETH_ALEN);
-
-    packet.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
-    packet.ver = 1;
-    packet.type = 1;
-    packet.code = CODE_PADI;
-    packet.session = 0;
-
-    svc->type = TAG_SERVICE_NAME;
-    svc->length = htons(namelen);
-    CHECK_ROOM(cursor, packet.payload, namelen+TAG_HDR_SIZE);
-
-    if (conn->serviceName) {
-	memcpy(svc->payload, conn->serviceName, strlen(conn->serviceName));
-    }
-    cursor += namelen + TAG_HDR_SIZE;
-
-    /* If we're using Host-Uniq, copy it over */
-    if (conn->useHostUniq) {
-	PPPoETag hostUniq;
-	pid_t pid = getpid();
-	hostUniq.type = htons(TAG_HOST_UNIQ);
-	hostUniq.length = htons(sizeof(pid));
-	memcpy(hostUniq.payload, &pid, sizeof(pid));
-	CHECK_ROOM(cursor, packet.payload, sizeof(pid) + TAG_HDR_SIZE);
-	memcpy(cursor, &hostUniq, sizeof(pid) + TAG_HDR_SIZE);
-	cursor += sizeof(pid) + TAG_HDR_SIZE;
-	plen += sizeof(pid) + TAG_HDR_SIZE;
-    }
-
-    packet.length = htons(plen);
-
-    sendPacket(conn, conn->discoverySocket, &packet, (int) (plen + HDR_SIZE));
-    if (conn->debugFile) {
-	dumpPacket(conn->debugFile, &packet, "SENT");
-	fprintf(conn->debugFile, "\n");
-	fflush(conn->debugFile);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: waitForPADO
-*%ARGUMENTS:
-* conn -- PPPoEConnection structure
-* timeout -- how long to wait (in seconds)
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Waits for a PADO packet and copies useful information
-***********************************************************************/
-void
-waitForPADO(PPPoEConnection *conn, int timeout)
-{
-    fd_set readable;
-    int r;
-    struct timeval tv;
-    PPPoEPacket packet;
-    int len;
-
-    struct PacketCriteria pc;
-    pc.conn          = conn;
-    pc.acNameOK      = (conn->acName)      ? 0 : 1;
-    pc.serviceNameOK = (conn->serviceName) ? 0 : 1;
-	
-    do {
-	if (BPF_BUFFER_IS_EMPTY) {
-	    tv.tv_sec = timeout;
-	    tv.tv_usec = 0;
-	
-	    FD_ZERO(&readable);
-	    FD_SET(conn->discoverySocket, &readable);
-
-	    while(1) {
-		r = select(conn->discoverySocket+1, &readable, NULL, NULL, &tv);
-		if (r >= 0 || errno != EINTR) break;
-	    }
-	    if (r < 0) {
-		fatalSys("select (waitForPADO)");
-	    }
-	    if (r == 0) return;        /* Timed out */
-	}
-	
-	/* Get the packet */
-	receivePacket(conn->discoverySocket, &packet, &len);
-
-	/* Check length */
-	if (ntohs(packet.length) + HDR_SIZE > len) {
-	    syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-		   (unsigned int) ntohs(packet.length));
-	    continue;
-	}
-
-#ifdef USE_BPF
-	/* If it's not a Discovery packet, loop again */
-	if (etherType(&packet) != Eth_PPPOE_Discovery) continue;
-#endif
-
-	if (conn->debugFile) {
-	    dumpPacket(conn->debugFile, &packet, "RCVD");
-	    fprintf(conn->debugFile, "\n");
-	    fflush(conn->debugFile);
-	}
-	/* If it's not for us, loop again */
-	if (!packetIsForMe(conn, &packet)) continue;
-
-	if (packet.code == CODE_PADO) {
-	    if (NOT_UNICAST(packet.ethHdr.h_source)) {
-		printErr("Ignoring PADO packet from non-unicast MAC address");
-		continue;
-	    }
-	    conn->numPADOs++;
-	    if (conn->printACNames) {
-		printf("--------------------------------------------------\n");
-	    }
-	    parsePacket(&packet, parsePADOTags, &pc);
-	    if (pc.acNameOK && pc.serviceNameOK) {
-		memcpy(conn->peerEth, packet.ethHdr.h_source, ETH_ALEN);
-		if (conn->printACNames) {
-		    printf("AC-Ethernet-Address: %02x:%02x:%02x:%02x:%02x:%02x\n",
-			   (unsigned) conn->peerEth[0], 
-			   (unsigned) conn->peerEth[1],
-			   (unsigned) conn->peerEth[2],
-			   (unsigned) conn->peerEth[3],
-			   (unsigned) conn->peerEth[4],
-			   (unsigned) conn->peerEth[5]);
-		    continue;
-		}
-		conn->discoveryState = STATE_RECEIVED_PADO;
-		break;
-	    }
-	}
-    } while (conn->discoveryState != STATE_RECEIVED_PADO);
-}
-
-/***********************************************************************
-*%FUNCTION: sendPADR
-*%ARGUMENTS:
-* conn -- PPPoE connection structur
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADR packet
-***********************************************************************/
-void
-sendPADR(PPPoEConnection *conn)
-{
-    PPPoEPacket packet;
-    PPPoETag *svc = (PPPoETag *) packet.payload;
-    unsigned char *cursor = packet.payload;
-
-    UINT16_t namelen = 0;
-    UINT16_t plen;
-
-    if (conn->serviceName) {
-	namelen = (UINT16_t) strlen(conn->serviceName);
-    }
-    plen = TAG_HDR_SIZE + namelen;
-    CHECK_ROOM(cursor, packet.payload, plen);
-
-    memcpy(packet.ethHdr.h_dest, conn->peerEth, ETH_ALEN);
-    memcpy(packet.ethHdr.h_source, conn->myEth, ETH_ALEN);
-
-    packet.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
-    packet.ver = 1;
-    packet.type = 1;
-    packet.code = CODE_PADR;
-    packet.session = 0;
-
-    svc->type = TAG_SERVICE_NAME;
-    svc->length = htons(namelen);
-    if (conn->serviceName) {
-	memcpy(svc->payload, conn->serviceName, namelen);
-    }
-    cursor += namelen + TAG_HDR_SIZE;
-
-    /* If we're using Host-Uniq, copy it over */
-    if (conn->useHostUniq) {
-	PPPoETag hostUniq;
-	pid_t pid = getpid();
-	hostUniq.type = htons(TAG_HOST_UNIQ);
-	hostUniq.length = htons(sizeof(pid));
-	memcpy(hostUniq.payload, &pid, sizeof(pid));
-	CHECK_ROOM(cursor, packet.payload, sizeof(pid)+TAG_HDR_SIZE);
-	memcpy(cursor, &hostUniq, sizeof(pid) + TAG_HDR_SIZE);
-	cursor += sizeof(pid) + TAG_HDR_SIZE;
-	plen += sizeof(pid) + TAG_HDR_SIZE;
-    }
-
-    /* Copy cookie and relay-ID if needed */
-    if (conn->cookie.type) {
-	CHECK_ROOM(cursor, packet.payload,
-		   ntohs(conn->cookie.length) + TAG_HDR_SIZE);
-	memcpy(cursor, &conn->cookie, ntohs(conn->cookie.length) + TAG_HDR_SIZE);
-	cursor += ntohs(conn->cookie.length) + TAG_HDR_SIZE;
-	plen += ntohs(conn->cookie.length) + TAG_HDR_SIZE;
-    }
-
-    if (conn->relayId.type) {
-	CHECK_ROOM(cursor, packet.payload,
-		   ntohs(conn->relayId.length) + TAG_HDR_SIZE);
-	memcpy(cursor, &conn->relayId, ntohs(conn->relayId.length) + TAG_HDR_SIZE);
-	cursor += ntohs(conn->relayId.length) + TAG_HDR_SIZE;
-	plen += ntohs(conn->relayId.length) + TAG_HDR_SIZE;
-    }
-
-    packet.length = htons(plen);
-    sendPacket(conn, conn->discoverySocket, &packet, (int) (plen + HDR_SIZE));
-    if (conn->debugFile) {
-	dumpPacket(conn->debugFile, &packet, "SENT");
-	fprintf(conn->debugFile, "\n");
-	fflush(conn->debugFile);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: waitForPADS
-*%ARGUMENTS:
-* conn -- PPPoE connection info
-* timeout -- how long to wait (in seconds)
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Waits for a PADS packet and copies useful information
-***********************************************************************/
-void
-waitForPADS(PPPoEConnection *conn, int timeout)
-{
-    fd_set readable;
-    int r;
-    struct timeval tv;
-    PPPoEPacket packet;
-    int len;
-
-    do {
-	if (BPF_BUFFER_IS_EMPTY) {
-	    tv.tv_sec = timeout;
-	    tv.tv_usec = 0;
-	    
-	    FD_ZERO(&readable);
-	    FD_SET(conn->discoverySocket, &readable);
-	    
-	    while(1) {
-		r = select(conn->discoverySocket+1, &readable, NULL, NULL, &tv);
-		if (r >= 0 || errno != EINTR) break;
-	    }
-	    if (r < 0) {
-		fatalSys("select (waitForPADS)");
-	    }
-	    if (r == 0) return;
-	}
-
-	/* Get the packet */
-	receivePacket(conn->discoverySocket, &packet, &len);
-
-	/* Check length */
-	if (ntohs(packet.length) + HDR_SIZE > len) {
-	    syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-		   (unsigned int) ntohs(packet.length));
-	    continue;
-	}
-
-#ifdef USE_BPF
-	/* If it's not a Discovery packet, loop again */
-	if (etherType(&packet) != Eth_PPPOE_Discovery) continue;
-#endif
-	if (conn->debugFile) {
-	    dumpPacket(conn->debugFile, &packet, "RCVD");
-	    fprintf(conn->debugFile, "\n");
-	    fflush(conn->debugFile);
-	}
-
-	/* If it's not from the AC, it's not for me */
-	if (memcmp(packet.ethHdr.h_source, conn->peerEth, ETH_ALEN)) continue;
-
-	/* If it's not for us, loop again */
-	if (!packetIsForMe(conn, &packet)) continue;
-
-	/* Is it PADS?  */
-	if (packet.code == CODE_PADS) {
-	    /* Parse for goodies */
-	    parsePacket(&packet, parsePADSTags, conn);
-	    conn->discoveryState = STATE_SESSION;
-	    break;
-	}
-    } while (conn->discoveryState != STATE_SESSION);
-
-    /* Don't bother with ntohs; we'll just end up converting it back... */
-    conn->session = packet.session;
-
-    syslog(LOG_INFO, "PPP session is %d", (int) ntohs(conn->session));
-
-    /* RFC 2516 says session id MUST NOT be zero or 0xFFFF */
-    if (ntohs(conn->session) == 0 || ntohs(conn->session) == 0xFFFF) {
-	syslog(LOG_ERR, "Access concentrator used a session value of %x -- the AC is violating RFC 2516", (unsigned int) ntohs(conn->session));
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: discovery
-*%ARGUMENTS:
-* conn -- PPPoE connection info structure
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Performs the PPPoE discovery phase
-***********************************************************************/
-void
-discovery(PPPoEConnection *conn)
-{
-    int padiAttempts = 0;
-    int padrAttempts = 0;
-    int timeout = PADI_TIMEOUT;
-
-    /* Skip discovery and don't open discovery socket? */
-    if (conn->skipDiscovery && conn->noDiscoverySocket) {
-	conn->discoveryState = STATE_SESSION;
-	return;
-    }
-
-    conn->discoverySocket =
-	openInterface(conn->ifName, Eth_PPPOE_Discovery, conn->myEth);
-
-    /* Skip discovery? */
-    if (conn->skipDiscovery) {
-	conn->discoveryState = STATE_SESSION;
-	if (conn->killSession) {
-	    sendPADT(conn, "RP-PPPoE: Session killed manually");
-	    exit(0);
-	}
-	return;
-    }
-
-    do {
-	padiAttempts++;
-	if (padiAttempts > MAX_PADI_ATTEMPTS) {
-	    rp_fatal("Timeout waiting for PADO packets");
-	}
-	sendPADI(conn);
-	conn->discoveryState = STATE_SENT_PADI;
-	waitForPADO(conn, timeout);
-
-	/* If we're just probing for access concentrators, don't do
-	   exponential backoff.  This reduces the time for an unsuccessful
-	   probe to 15 seconds. */
-	if (!conn->printACNames) {
-	    timeout *= 2;
-	}
-	if (conn->printACNames && conn->numPADOs) {
-	    break;
-	}
-    } while (conn->discoveryState == STATE_SENT_PADI);
-
-    /* If we're only printing access concentrator names, we're done */
-    if (conn->printACNames) {
-	printf("--------------------------------------------------\n");
-	exit(0);
-    }
-
-    timeout = PADI_TIMEOUT;
-    do {
-	padrAttempts++;
-	if (padrAttempts > MAX_PADI_ATTEMPTS) {
-	    rp_fatal("Timeout waiting for PADS packets");
-	}
-	sendPADR(conn);
-	conn->discoveryState = STATE_SENT_PADR;
-	waitForPADS(conn, timeout);
-	timeout *= 2;
-    } while (conn->discoveryState == STATE_SENT_PADR);
-
-    /* We're done. */
-    conn->discoveryState = STATE_SESSION;
-    return;
-}
-
diff --git a/mdk-stage1/rp-pppoe/src/if.c b/mdk-stage1/rp-pppoe/src/if.c
deleted file mode 100644
index fec09b273..000000000
--- a/mdk-stage1/rp-pppoe/src/if.c
+++ /dev/null
@@ -1,1092 +0,0 @@
-/***********************************************************************
-*
-* if.c
-*
-* Implementation of user-space PPPoE redirector for Linux.
-*
-* Functions for opening a raw socket and reading/writing raw Ethernet frames.
-*
-* Copyright (C) 2000 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef HAVE_NETPACKET_PACKET_H
-#include <netpacket/packet.h>
-#elif defined(HAVE_LINUX_IF_PACKET_H)
-#include <linux/if_packet.h>
-#endif
-
-#ifdef HAVE_NET_ETHERNET_H
-#include <net/ethernet.h>
-#endif
-
-#ifdef HAVE_ASM_TYPES_H
-#include <asm/types.h>
-#endif
-
-#ifdef HAVE_SYS_IOCTL_H
-#include <sys/ioctl.h>
-#endif
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#include <errno.h>
-#include <stdlib.h>
-#include <string.h>
-
-#ifdef HAVE_NET_IF_ARP_H
-#include <net/if_arp.h>
-#endif
-
-#ifdef USE_DLPI
-
-#include <limits.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/stream.h>
-#include <sys/stropts.h>
-#include <sys/dlpi.h>
-#include <sys/bufmod.h>
-#include <stdio.h>
-#include <signal.h>
-#include <stropts.h>
-
-/* function declarations */
-
-void dlpromisconreq( int fd, u_long  level);
-void dlinforeq(int fd);
-void dlunitdatareq(int fd, u_char *addrp, int addrlen, u_long minpri, u_long maxpri, u_char *datap, int datalen);
-void dlinfoack(int fd, char *bufp);
-void dlbindreq(int fd, u_long sap, u_long max_conind, u_long service_mode, u_long conn_mgmt, u_long xidtest);
-void dlattachreq(int fd, u_long ppa);
-void dlokack(int fd, char *bufp);
-void dlbindack(int fd, char *bufp);
-int strioctl(int fd, int cmd, int timout, int len, char *dp);
-void strgetmsg(int fd, struct strbuf *ctlp, struct strbuf *datap, int *flagsp, char *caller);
-void sigalrm(int sig);
-void expecting(int prim, union DL_primitives *dlp);
-char *dlprim(u_long prim);
-
-/* #define DL_DEBUG */
-
-static	int     dl_abssaplen;
-static	int     dl_saplen;
-static	int 	dl_addrlen;
-
-#endif
-
-#ifdef USE_BPF
-#include <net/bpf.h>
-#include <fcntl.h>
-
-unsigned char *bpfBuffer;	/* Packet filter buffer */
-int bpfLength = 0;		/* Packet filter buffer length */
-int bpfSize = 0;		/* Number of unread bytes in buffer */
-int bpfOffset = 0;		/* Current offset in bpfBuffer */
-#endif
-
-/* Initialize frame types to RFC 2516 values.  Some broken peers apparently
-   use different frame types... sigh... */
-
-UINT16_t Eth_PPPOE_Discovery = ETH_PPPOE_DISCOVERY;
-UINT16_t Eth_PPPOE_Session   = ETH_PPPOE_SESSION;
-
-/**********************************************************************
-*%FUNCTION: etherType
-*%ARGUMENTS:
-* packet -- a received PPPoE packet
-*%RETURNS:
-* ethernet packet type (see /usr/include/net/ethertypes.h)
-*%DESCRIPTION:
-* Checks the ethernet packet header to determine its type.
-* We should only be receveing DISCOVERY and SESSION types if the BPF
-* is set up correctly.  Logs an error if an unexpected type is received.
-* Note that the ethernet type names come from "pppoe.h" and the packet
-* packet structure names use the LINUX dialect to maintain consistency
-* with the rest of this file.  See the BSD section of "pppoe.h" for
-* translations of the data structure names.
-***********************************************************************/
-UINT16_t
-etherType(PPPoEPacket *packet)
-{
-    UINT16_t type = (UINT16_t) ntohs(packet->ethHdr.h_proto);
-    if (type != Eth_PPPOE_Discovery && type != Eth_PPPOE_Session) {
-	syslog(LOG_ERR, "Invalid ether type 0x%x", type);
-    }
-    return type;
-}
-
-#ifdef USE_BPF
-/**********************************************************************
-*%FUNCTION: getHWaddr
-*%ARGUMENTS:
-* ifname -- name of interface
-* hwaddr -- buffer for ehthernet address
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Locates the Ethernet hardware address for an interface.
-***********************************************************************/
-void
-getHWaddr(int sock, char const *ifname, unsigned char *hwaddr)
-{
-    char inbuf[8192];
-    const struct sockaddr_dl *sdl;
-    struct ifconf ifc;
-    struct ifreq ifreq, *ifr;
-    int i;
-    int found = 0;
-
-    ifc.ifc_len = sizeof(inbuf);
-    ifc.ifc_buf = inbuf;
-    if (ioctl(sock, SIOCGIFCONF, &ifc) < 0) {
-	fatalSys("SIOCGIFCONF");
-    }
-    ifr = ifc.ifc_req;
-    ifreq.ifr_name[0] = '\0';
-    for (i = 0; i < ifc.ifc_len; ) {
-	ifr = (struct ifreq *)((caddr_t)ifc.ifc_req + i);
-	i += sizeof(ifr->ifr_name) +
-		    (ifr->ifr_addr.sa_len > sizeof(struct sockaddr)
-		    ? ifr->ifr_addr.sa_len
-		    : sizeof(struct sockaddr));
-	if (ifr->ifr_addr.sa_family == AF_LINK) {
-	    sdl = (const struct sockaddr_dl *) &ifr->ifr_addr;
-	    if ((sdl->sdl_type == IFT_ETHER) &&
-	        (sdl->sdl_alen == ETH_ALEN) &&
-		!strncmp(ifname, ifr->ifr_name, sizeof(ifr->ifr_name))) {
-		if (found) {
-		    char buffer[256];
-		    sprintf(buffer, "interface %.16s has more than one ethernet address", ifname);
-		    rp_fatal(buffer);
-		} else {
-		    found = 1;
-	            memcpy(hwaddr, LLADDR(sdl), ETH_ALEN);
-		}
-	    }
-	}
-    }
-    if (!found) {
-	char buffer[256];
-        sprintf(buffer, "interface %.16s has no ethernet address", ifname);
-	rp_fatal(buffer);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: initFilter
-*%ARGUMENTS:
-* fd -- file descriptor of BSD device
-* type -- Ethernet frame type (0 for watch mode)
-* hwaddr -- buffer with ehthernet address
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Initializes the packet filter rules.
-***********************************************************************/
-void
-initFilter(int fd, UINT16_t type, unsigned char *hwaddr)
-{
-    /* Packet Filter Instructions:
-     * Note that the ethernet type names come from "pppoe.h" and are
-     * used here to maintain consistency with the rest of this file. */
-    static struct bpf_insn bpfRun[] = {         /* run PPPoE */
-        BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 12),     /* ethernet type */
-        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, ETH_PPPOE_SESSION, 5, 0),
-        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, ETH_PPPOE_DISCOVERY, 0, 9),
-        BPF_STMT(BPF_LD+BPF_W+BPF_ABS, 0),      /* first word of dest. addr */
-#define PPPOE_BCAST_CMPW 4                     /* offset of word compare */
-        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 0, 2),
-        BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 4),      /* next 1/2 word of dest. */
-#define PPPOE_BCAST_CMPH 6                     /* offset of 1/2 word compare */
-        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 4, 0),
-        BPF_STMT(BPF_LD+BPF_W+BPF_ABS, 0),      /* first word of dest. addr */
-#define PPPOE_FILTER_CMPW 8                     /* offset of word compare */
-        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 0, 3),
-        BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 4),      /* next 1/2 word of dest. */
-#define PPPOE_FILTER_CMPH 10                    /* offset of 1/rd compare */
-        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 0, 1),
-        BPF_STMT(BPF_RET+BPF_K, (u_int) -1),    /* keep packet */
-        BPF_STMT(BPF_RET+BPF_K, 0),             /* drop packet */
-    };
-
-    /* Fix the potentially varying parts */
-    bpfRun[1].code = (u_short) BPF_JMP+BPF_JEQ+BPF_K;
-    bpfRun[1].jt   = 5;
-    bpfRun[1].jf   = 0;
-    bpfRun[1].k    = Eth_PPPOE_Session;
-
-    bpfRun[2].code = (u_short) BPF_JMP+BPF_JEQ+BPF_K;
-    bpfRun[2].jt   = 0;
-    bpfRun[2].jf   = 9;
-    bpfRun[2].k    = Eth_PPPOE_Discovery;
-
-    {
-      struct bpf_insn bpfInsn[sizeof(bpfRun) / sizeof(bpfRun[0])];
-      struct bpf_program bpfProgram;
-      memcpy(bpfInsn, bpfRun, sizeof(bpfRun));
-      bpfInsn[PPPOE_BCAST_CMPW].k = ((0xff << 24) | (0xff << 16) |
-                                     (0xff << 8) | 0xff);
-      bpfInsn[PPPOE_BCAST_CMPH].k = ((0xff << 8) | 0xff);
-      bpfInsn[PPPOE_FILTER_CMPW].k = ((hwaddr[0] << 24) | (hwaddr[1] << 16) |
-				      (hwaddr[2] << 8) | hwaddr[3]);
-      bpfInsn[PPPOE_FILTER_CMPH].k = ((hwaddr[4] << 8) | hwaddr[5]);
-      bpfProgram.bf_len = (sizeof(bpfInsn) / sizeof(bpfInsn[0]));
-      bpfProgram.bf_insns = &bpfInsn[0];
-      
-      /* Apply the filter */
-      if (ioctl(fd, BIOCSETF, &bpfProgram) < 0) {
-	fatalSys("ioctl(BIOCSETF)");
-      }
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: openInterface
-*%ARGUMENTS:
-* ifname -- name of interface
-* type -- Ethernet frame type (0 for any frame type)
-* hwaddr -- if non-NULL, set to the hardware address
-*%RETURNS:
-* A file descriptor for talking with the Ethernet card.  Exits on error.
-* Note that the Linux version of this routine returns a socket instead.
-*%DESCRIPTION:
-* Opens a BPF on an interface for all PPPoE traffic (discovery and
-* session).  If 'type' is 0, uses promiscuous mode to watch any PPPoE
-* traffic on this network.
-***********************************************************************/
-int
-openInterface(char const *ifname, UINT16_t type, unsigned char *hwaddr)
-{
-    static int fd = -1;
-    char bpfName[32];
-    u_int optval;
-    struct bpf_version bpf_ver;
-    struct ifreq ifr;
-    int sock;
-    int i;
-
-    /* BSD only opens one socket for both Discovery and Session packets */
-    if (fd >= 0) {
-	return fd;
-    }
-
-    /* Find a free BPF device */
-    for (i = 0; i < 256; i++) {
-	sprintf(bpfName, "/dev/bpf%d", i);
-	if (((fd = open(bpfName, O_RDWR, 0)) >= 0) ||
-	    (errno != EBUSY)) {
-	    break;
-	}
-    }
-    if (fd < 0) {
-	switch (errno) {
-	case EACCES:		/* permission denied */
-	    {
-		char buffer[256];
-		sprintf(buffer, "Cannot open %.32s -- pppoe must be run as root.", bpfName);
-		rp_fatal(buffer);
-	    }
-	    break;
-	case EBUSY:
-	case ENOENT:		/* no such file */
-	    if (i == 0) {
-		rp_fatal("No /dev/bpf* devices (check your kernel configuration for BPF support)");
-	    } else {
-		rp_fatal("All /dev/bpf* devices are in use");
-	    }
-	    break;
-	}
-	fatalSys(bpfName);
-    }
-
-    if ((sock = socket(AF_LOCAL, SOCK_DGRAM, 0)) < 0) {
-	fatalSys("socket");
-    }
-
-    /* Check that the interface is up */
-    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sock, SIOCGIFFLAGS, &ifr) < 0) {
-	fatalSys("ioctl(SIOCGIFFLAGS)");
-    }
-    if ((ifr.ifr_flags & IFF_UP) == 0) {
-	char buffer[256];
-	sprintf(buffer, "Interface %.16s is not up\n", ifname);
-	rp_fatal(buffer);
-    }
-
-    /* Fill in hardware address and initialize the packet filter rules */
-    if (hwaddr == NULL) {
-	rp_fatal("openInterface: no hwaddr arg.");
-    }
-    getHWaddr(sock, ifname, hwaddr);
-    initFilter(fd, type, hwaddr);
-
-    /* Sanity check on MTU -- apparently does not work on OpenBSD */
-#if !defined(__OpenBSD__)
-    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sock, SIOCGIFMTU, &ifr) < 0) {
-	fatalSys("ioctl(SIOCGIFMTU)");
-    }
-    if (ifr.ifr_mtu < ETH_DATA_LEN) {
-	char buffer[256];
-	sprintf(buffer, "Interface %.16s has MTU of %d -- should be %d.  You may have serious connection problems.",
-		ifname, ifr.ifr_mtu, ETH_DATA_LEN);
-	printErr(buffer);
-    }
-#endif
-
-    /* done with the socket */
-    if (close(sock) < 0) {
-	fatalSys("close");
-    }
-
-    /* Check the BPF version number */
-    if (ioctl(fd, BIOCVERSION, &bpf_ver) < 0) {
-	fatalSys("ioctl(BIOCVERSION)");
-    }
-    if ((bpf_ver.bv_major != BPF_MAJOR_VERSION) ||
-        (bpf_ver.bv_minor < BPF_MINOR_VERSION)) {
-	char buffer[256];
-	sprintf(buffer, "Unsupported BPF version: %d.%d (kernel: %d.%d)", 
-			BPF_MAJOR_VERSION, BPF_MINOR_VERSION,
-			bpf_ver.bv_major, bpf_ver.bv_minor);
-	rp_fatal(buffer);
-    }
-
-    /* allocate a receive packet buffer */
-    if (ioctl(fd, BIOCGBLEN, &bpfLength) < 0) {
-	fatalSys("ioctl(BIOCGBLEN)");
-    }
-    if (!(bpfBuffer = (unsigned char *) malloc(bpfLength))) {
-	rp_fatal("malloc");
-    }
-
-    /* reads should return as soon as there is a packet available */
-    optval = 1;
-    if (ioctl(fd, BIOCIMMEDIATE, &optval) < 0) {
-	fatalSys("ioctl(BIOCIMMEDIATE)");
-    }
-
-    /* Bind the interface to the filter */
-    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(fd, BIOCSETIF, &ifr) < 0) {
-	char buffer[256];
-	sprintf(buffer, "ioctl(BIOCSETIF) can't select interface %.16s",
-		ifname);
-	rp_fatal(buffer);
-    }
-
-    syslog(LOG_INFO, "Interface=%.16s HWaddr=%02X:%02X:%02X:%02X:%02X:%02X Device=%.32s Buffer size=%d",
-	   ifname, 
-	   hwaddr[0], hwaddr[1], hwaddr[2],
-	   hwaddr[3], hwaddr[4], hwaddr[5],
-	   bpfName, bpfLength);
-    return fd;
-}
-
-#endif /* USE_BPF */
-
-#ifdef USE_LINUX_PACKET
-/**********************************************************************
-*%FUNCTION: openInterface
-*%ARGUMENTS:
-* ifname -- name of interface
-* type -- Ethernet frame type
-* hwaddr -- if non-NULL, set to the hardware address
-*%RETURNS:
-* A raw socket for talking to the Ethernet card.  Exits on error.
-*%DESCRIPTION:
-* Opens a raw Ethernet socket
-***********************************************************************/
-int
-openInterface(char const *ifname, UINT16_t type, unsigned char *hwaddr)
-{
-    int optval=1;
-    int fd;
-    struct ifreq ifr;
-    int domain, stype;
-
-#ifdef HAVE_STRUCT_SOCKADDR_LL
-    struct sockaddr_ll sa;
-#else
-    struct sockaddr sa;
-#endif
-
-    memset(&sa, 0, sizeof(sa));
-
-#ifdef HAVE_STRUCT_SOCKADDR_LL
-    domain = PF_PACKET;
-    stype = SOCK_RAW;
-#else
-    domain = PF_INET;
-    stype = SOCK_PACKET;
-#endif
-
-    if ((fd = socket(domain, stype, htons(type))) < 0) {
-	/* Give a more helpful message for the common error case */
-	if (errno == EPERM) {
-	    rp_fatal("Cannot create raw socket -- pppoe must be run as root.");
-	}
-	fatalSys("socket");
-    }
-
-    if (setsockopt(fd, SOL_SOCKET, SO_BROADCAST, &optval, sizeof(optval)) < 0) {
-	fatalSys("setsockopt");
-    }
-
-    /* Fill in hardware address */
-    if (hwaddr) {
-	strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-	if (ioctl(fd, SIOCGIFHWADDR, &ifr) < 0) {
-	    fatalSys("ioctl(SIOCGIFHWADDR)");
-	}
-	memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, ETH_ALEN);
-#ifdef ARPHRD_ETHER
-	if (ifr.ifr_hwaddr.sa_family != ARPHRD_ETHER) {
-	    char buffer[256];
-	    sprintf(buffer, "Interface %.16s is not Ethernet", ifname);
-	    rp_fatal(buffer);
-	}
-#endif
-	if (NOT_UNICAST(hwaddr)) {
-	    char buffer[256];
-	    sprintf(buffer,
-		    "Interface %.16s has broadcast/multicast MAC address??",
-		    ifname);
-	    rp_fatal(buffer);
-	}
-    }
-
-    /* Sanity check on MTU */
-    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(fd, SIOCGIFMTU, &ifr) < 0) {
-	fatalSys("ioctl(SIOCGIFMTU)");
-    }
-    if (ifr.ifr_mtu < ETH_DATA_LEN) {
-	char buffer[256];
-	sprintf(buffer, "Interface %.16s has MTU of %d -- should be %d.  You may have serious connection problems.",
-		ifname, ifr.ifr_mtu, ETH_DATA_LEN);
-	printErr(buffer);
-    }
-
-#ifdef HAVE_STRUCT_SOCKADDR_LL
-    /* Get interface index */
-    sa.sll_family = AF_PACKET;
-    sa.sll_protocol = htons(type);
-
-    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(fd, SIOCGIFINDEX, &ifr) < 0) {
-	fatalSys("ioctl(SIOCFIGINDEX): Could not get interface index");
-    }
-    sa.sll_ifindex = ifr.ifr_ifindex;
-
-#else
-    strcpy(sa.sa_data, ifname);
-#endif
-
-    /* We're only interested in packets on specified interface */
-    if (bind(fd, (struct sockaddr *) &sa, sizeof(sa)) < 0) {
-	fatalSys("bind");
-    }
-
-    return fd;
-}
-
-#endif /* USE_LINUX */
-
-/***********************************************************************
-*%FUNCTION: sendPacket
-*%ARGUMENTS:
-* sock -- socket to send to
-* pkt -- the packet to transmit
-* size -- size of packet (in bytes)
-*%RETURNS:
-* 0 on success; -1 on failure
-*%DESCRIPTION:
-* Transmits a packet
-***********************************************************************/
-int
-sendPacket(PPPoEConnection *conn, int sock, PPPoEPacket *pkt, int size)
-{
-#if defined(USE_BPF)
-    if (write(sock, pkt, size) < 0) {
-	sysErr("write (sendPacket)");
-	return -1;
-    }
-#elif defined(HAVE_STRUCT_SOCKADDR_LL)
-    if (send(sock, pkt, size, 0) < 0) {
-	sysErr("send (sendPacket)");
-	return -1;
-    }
-#else
-#ifdef USE_DLPI
-
-#define ABS(x)          ((x) < 0 ? -(x) : (x))
-
-	u_char  addr[MAXDLADDR];
-	u_char  phys[MAXDLADDR];
-	u_char  sap[MAXDLADDR];
-	u_char    xmitbuf[MAXDLBUF];
-	int	data_size;
-
-	short	tmp_sap;
-
-	tmp_sap = htons(pkt->ethHdr.h_proto); 
-	data_size = size - sizeof(struct ethhdr); 
-
-	memcpy((char *)phys, (char *)pkt->ethHdr.h_dest, ETHERADDRL);
-	memcpy((char *)sap,  (char *)&tmp_sap, sizeof(ushort_t));
-	memcpy((char *)xmitbuf, (char *)pkt + sizeof(struct ethhdr), data_size); 
-
-	if (dl_saplen > 0) {  /* order is sap+phys */
-		(void) memcpy((char*)addr, (char*)&sap, dl_abssaplen);
-		(void) memcpy((char*)addr+dl_abssaplen, (char*)phys, ETHERADDRL);
-	} else {        /* order is phys+sap */
-		(void) memcpy((char*)addr, (char*)phys, ETHERADDRL);
-		(void) memcpy((char*)addr+ETHERADDRL, (char*)&sap, dl_abssaplen);
-	}
-
-#ifdef DL_DEBUG
-	printf("%02x:%02x:%02x:%02x:%02x:%02x %02x:%02x\n", 
-		addr[0],addr[1],addr[2],addr[3],addr[4],addr[5],
-		addr[6],addr[7]);
-#endif
-
-	dlunitdatareq(sock, addr, dl_addrlen, 0, 0, xmitbuf, data_size);
-
-
-
-#else
-    struct sockaddr sa;
-
-    if (!conn) {
-	rp_fatal("relay and server not supported on Linux 2.0 kernels");
-    }
-    strcpy(sa.sa_data, conn->ifName);
-    if (sendto(sock, pkt, size, 0, &sa, sizeof(sa)) < 0) {
-	sysErr("sendto (sendPacket)");
-	return -1;
-    }
-#endif
-#endif
-    return 0;
-}
-
-#ifdef USE_BPF
-/***********************************************************************
-*%FUNCTION: clearPacketHeader
-*%ARGUMENTS:
-* pkt -- packet that needs its head clearing
-*%RETURNS:
-* nothing
-*%DESCRIPTION:
-* Clears a PPPoE packet header after a truncated packet has been
-* received.  Insures that the packet will fail any integrity tests
-* and will be discarded by upper level routines.  Also resets the
-* bpfSize and bpfOffset variables to force a new read on the next
-* call to receivePacket().
-***********************************************************************/
-void
-clearPacketHeader(PPPoEPacket *pkt)
-{
-    bpfSize = bpfOffset = 0;
-    memset(pkt, 0, HDR_SIZE);
-}
-#endif
-
-/***********************************************************************
-*%FUNCTION: receivePacket
-*%ARGUMENTS:
-* sock -- socket to read from
-* pkt -- place to store the received packet
-* size -- set to size of packet in bytes
-*%RETURNS:
-* >= 0 if all OK; < 0 if error
-*%DESCRIPTION:
-* Receives a packet
-***********************************************************************/
-int
-receivePacket(int sock, PPPoEPacket *pkt, int *size)
-{
-#ifdef USE_BPF
-    struct bpf_hdr hdr;
-    int seglen, copylen;
-
-    if (bpfSize <= 0) {
-	bpfOffset = 0;
-	if ((bpfSize = read(sock, bpfBuffer, bpfLength)) < 0) {
-	    sysErr("read (receivePacket)");
-	    return -1;
-	}
-    }
-    if (bpfSize < sizeof(hdr)) {
-	syslog(LOG_ERR, "Truncated bpf packet header: len=%d", bpfSize);
-	clearPacketHeader(pkt);		/* resets bpfSize and bpfOffset */
-	return 0;
-    }
-    memcpy(&hdr, bpfBuffer + bpfOffset, sizeof(hdr));
-    if (hdr.bh_caplen != hdr.bh_datalen) {
-	syslog(LOG_ERR, "Truncated bpf packet: caplen=%d, datalen=%d",
-	       hdr.bh_caplen, hdr.bh_datalen);
-	clearPacketHeader(pkt);		/* resets bpfSize and bpfOffset */
-	return 0;
-    }
-    seglen = hdr.bh_hdrlen + hdr.bh_caplen;
-    if (seglen > bpfSize) {
-	syslog(LOG_ERR, "Truncated bpf packet: seglen=%d, bpfSize=%d",
-	       seglen, bpfSize);
-	clearPacketHeader(pkt);		/* resets bpfSize and bpfOffset */
-	return 0;
-    }
-    seglen = BPF_WORDALIGN(seglen);
-    *size = copylen = ((hdr.bh_caplen < sizeof(PPPoEPacket)) ?
-			hdr.bh_caplen : sizeof(PPPoEPacket));
-    memcpy(pkt, bpfBuffer + bpfOffset + hdr.bh_hdrlen, copylen);
-    if (seglen >= bpfSize) {
-	bpfSize = bpfOffset = 0;
-    } else {
-	bpfSize -= seglen;
-	bpfOffset += seglen;
-    }
-#else
-#ifdef USE_DLPI
-	struct strbuf data; 
-	int flags = 0; 	
-	int retval; 
-
-	data.buf = (char *) pkt; 
-	data.maxlen = MAXDLBUF; 
-	data.len = 0; 
-	
-	if ((retval = getmsg(sock, NULL, &data, &flags)) < 0) {
-	    sysErr("read (receivePacket)");
-	    return -1;
-	}
-
-	*size = data.len; 
-
-#else
-    if ((*size = recv(sock, pkt, sizeof(PPPoEPacket), 0)) < 0) {
-	sysErr("recv (receivePacket)");
-	return -1;
-    }
-#endif
-#endif
-    return 0;
-}
-
-#ifdef USE_DLPI
-/**********************************************************************
-*%FUNCTION: openInterface
-*%ARGUMENTS:
-* ifname -- name of interface
-* type -- Ethernet frame type
-* hwaddr -- if non-NULL, set to the hardware address
-*%RETURNS:
-* A raw socket for talking to the Ethernet card.  Exits on error.
-*%DESCRIPTION:
-* Opens a raw Ethernet socket
-***********************************************************************/
-int
-openInterface(char const *ifname, UINT16_t type, unsigned char *hwaddr)
-{
-    int fd;
-    long buf[MAXDLBUF]; 
-
-	union   DL_primitives   *dlp;
-
-    char base_dev[PATH_MAX]; 
-    int ppa; 
-
-    if(strlen(ifname) > PATH_MAX) {
-	rp_fatal("socket: string to long"); 
-    }
-
-    ppa = atoi(&ifname[strlen(ifname)-1]);
-    strncpy(base_dev, ifname, PATH_MAX); 
-    base_dev[strlen(base_dev)-1] = '\0'; 
-
-    if (( fd = open(base_dev, O_RDWR)) < 0) {
-	/* Give a more helpful message for the common error case */
-	if (errno == EPERM) {
-	    rp_fatal("Cannot create raw socket -- pppoe must be run as root.");
-	}
-	fatalSys("socket");
-    }
-
-	dlinforeq(fd);
-	dlinfoack(fd, (char *)buf);
-
-	dlp = (union DL_primitives*) buf;
-
-	dl_abssaplen = ABS(dlp->info_ack.dl_sap_length);
-	dl_saplen = dlp->info_ack.dl_sap_length;
-	if (ETHERADDRL != (dlp->info_ack.dl_addr_length - dl_abssaplen))
-		fatalSys("invalid destination physical address length");
-	dl_addrlen = dl_abssaplen + ETHERADDRL;
-
-	dlattachreq(fd, ppa); 
-	dlokack(fd, (char *)buf);
-
-	dlbindreq(fd, type, 0, DL_CLDLS, 0, 0);
-	dlbindack(fd, (char *)buf);
-
-	if ( strioctl(fd, DLIOCRAW, -1, 0, NULL) < 0 ) { 
-		fatalSys("DLIOCRAW"); 
-	}
-
-	if (ioctl(fd, I_FLUSH, FLUSHR) < 0) fatalSys("I_FLUSH");
-
-    return fd;
-}
-
-/* cloned from dlcommon.c */
-
-void dlpromisconreq(int fd, u_long level)
-{
-        dl_promiscon_req_t      promiscon_req;
-        struct  strbuf  ctl;
-        int     flags;
-
-        promiscon_req.dl_primitive = DL_PROMISCON_REQ;
-        promiscon_req.dl_level = level;
-
-        ctl.maxlen = 0;
-        ctl.len = sizeof (promiscon_req);
-        ctl.buf = (char *) &promiscon_req;
-
-        flags = 0;
-
-        if (putmsg(fd, &ctl, (struct strbuf*) NULL, flags) < 0)
-                fatalSys("dlpromiscon:  putmsg");
-
-}
-
-void dlinforeq(int fd)
-{
-        dl_info_req_t   info_req;
-        struct  strbuf  ctl;
-        int     flags;
-
-        info_req.dl_primitive = DL_INFO_REQ;
-
-        ctl.maxlen = 0;
-        ctl.len = sizeof (info_req);
-        ctl.buf = (char *) &info_req;
-
-        flags = RS_HIPRI;
-
-        if (putmsg(fd, &ctl, (struct strbuf*) NULL, flags) < 0)
-                fatalSys("dlinforeq:  putmsg");
-}
-
-void dlunitdatareq(int fd, u_char *addrp, int addrlen, u_long minpri, u_long maxpri, u_char *datap, int datalen)
-{
-        long    buf[MAXDLBUF];
-        union   DL_primitives   *dlp;
-        struct  strbuf  data, ctl;
-
-        dlp = (union DL_primitives*) buf;
-
-        dlp->unitdata_req.dl_primitive = DL_UNITDATA_REQ;
-        dlp->unitdata_req.dl_dest_addr_length = addrlen;
-        dlp->unitdata_req.dl_dest_addr_offset = sizeof (dl_unitdata_req_t);
-        dlp->unitdata_req.dl_priority.dl_min = minpri;
-        dlp->unitdata_req.dl_priority.dl_max = maxpri;
-
-        (void) memcpy(OFFADDR(dlp, sizeof (dl_unitdata_req_t)), addrp, addrlen);
-
-        ctl.maxlen = 0;
-        ctl.len = sizeof (dl_unitdata_req_t) + addrlen;
-        ctl.buf = (char *) buf;
-
-        data.maxlen = 0;
-        data.len = datalen;
-        data.buf = (char *) datap;
-
-        if (putmsg(fd, &ctl, &data, 0) < 0)
-                fatalSys("dlunitdatareq:  putmsg");
-}
-
-void dlinfoack(int fd, char *bufp)
-{
-        union   DL_primitives   *dlp;
-        struct  strbuf  ctl;
-        int     flags;
-
-        ctl.maxlen = MAXDLBUF;
-        ctl.len = 0;
-        ctl.buf = bufp;
-
-        strgetmsg(fd, &ctl, (struct strbuf*)NULL, &flags, "dlinfoack");
-
-        dlp = (union DL_primitives *) ctl.buf;
-
-        expecting(DL_INFO_ACK, dlp);
-
-        if (ctl.len < sizeof (dl_info_ack_t)) {
-		char buffer[256];
-		sprintf(buffer, "dlinfoack:  response ctl.len too short:  %d", ctl.len); 
-                rp_fatal(buffer); 
-	}
-
-        if (flags != RS_HIPRI)
-                rp_fatal("dlinfoack:  DL_INFO_ACK was not M_PCPROTO");
-
-        if (ctl.len < sizeof (dl_info_ack_t)) {
-		char buffer[256];
-		sprintf(buffer, "dlinfoack:  short response ctl.len:  %d", ctl.len); 
-		rp_fatal(buffer); 
-	}
-}
-
-void dlbindreq(int fd, u_long sap, u_long max_conind, u_long service_mode, u_long conn_mgmt, u_long xidtest)
-{
-        dl_bind_req_t   bind_req;
-        struct  strbuf  ctl;
-        int     flags;
-
-        bind_req.dl_primitive = DL_BIND_REQ;
-        bind_req.dl_sap = sap;
-        bind_req.dl_max_conind = max_conind;
-        bind_req.dl_service_mode = service_mode;
-        bind_req.dl_conn_mgmt = conn_mgmt;
-        bind_req.dl_xidtest_flg = xidtest;
-
-        ctl.maxlen = 0;
-        ctl.len = sizeof (bind_req);
-        ctl.buf = (char *) &bind_req;
-
-        flags = 0;
-
-        if (putmsg(fd, &ctl, (struct strbuf*) NULL, flags) < 0)
-                fatalSys("dlbindreq:  putmsg");
-}
-
-void dlattachreq(int fd, u_long ppa)
-{
-        dl_attach_req_t attach_req;
-        struct  strbuf  ctl;
-        int     flags;
-
-        attach_req.dl_primitive = DL_ATTACH_REQ;
-        attach_req.dl_ppa = ppa;
-
-        ctl.maxlen = 0;
-        ctl.len = sizeof (attach_req);
-        ctl.buf = (char *) &attach_req;
-
-        flags = 0;
-
-        if (putmsg(fd, &ctl, (struct strbuf*) NULL, flags) < 0)
-                fatalSys("dlattachreq:  putmsg");
-}
-
-void dlokack(int fd, char *bufp)
-{
-        union   DL_primitives   *dlp;
-        struct  strbuf  ctl;
-        int     flags;
-
-        ctl.maxlen = MAXDLBUF;
-        ctl.len = 0;
-        ctl.buf = bufp;
-
-        strgetmsg(fd, &ctl, (struct strbuf*)NULL, &flags, "dlokack");
-
-        dlp = (union DL_primitives *) ctl.buf;
-
-        expecting(DL_OK_ACK, dlp);
-
-        if (ctl.len < sizeof (dl_ok_ack_t)) { 
-		char buffer[256];
-		sprintf(buffer, "dlokack:  response ctl.len too short:  %d", ctl.len);
-		rp_fatal(buffer); 
-	}
-
-        if (flags != RS_HIPRI)
-                rp_fatal("dlokack:  DL_OK_ACK was not M_PCPROTO");
-
-        if (ctl.len < sizeof (dl_ok_ack_t)) {
-		char buffer[256]; 
-		sprintf(buffer, "dlokack:  short response ctl.len:  %d", ctl.len);
-		rp_fatal(buffer); 
-	}
-}
-
-void dlbindack(int fd, char *bufp)
-{
-        union   DL_primitives   *dlp;
-        struct  strbuf  ctl;
-        int     flags;
-
-        ctl.maxlen = MAXDLBUF;
-        ctl.len = 0;
-        ctl.buf = bufp;
-
-        strgetmsg(fd, &ctl, (struct strbuf*)NULL, &flags, "dlbindack");
-
-        dlp = (union DL_primitives *) ctl.buf;
-
-        expecting(DL_BIND_ACK, dlp);
-
-        if (flags != RS_HIPRI)
-                rp_fatal("dlbindack:  DL_OK_ACK was not M_PCPROTO");
-
-        if (ctl.len < sizeof (dl_bind_ack_t)) {
-		char buffer[256];
-		sprintf(buffer, "dlbindack:  short response ctl.len:  %d", ctl.len);
-		rp_fatal(buffer); 
-	}
-}
-
-int strioctl(int fd, int cmd, int timout, int len, char *dp)
-{
-        struct  strioctl        sioc;
-        int     rc;
-
-        sioc.ic_cmd = cmd;
-        sioc.ic_timout = timout;
-        sioc.ic_len = len;
-        sioc.ic_dp = dp;
-        rc = ioctl(fd, I_STR, &sioc);
-
-        if (rc < 0)
-                return (rc);
-        else
-                return (sioc.ic_len);
-}
-
-void strgetmsg(int fd, struct strbuf *ctlp, struct strbuf *datap, int *flagsp, char *caller)
-{
-        int     rc;
-        static  char    errmsg[80];
-
-        /*
-         * Start timer.
-         */
-        (void) signal(SIGALRM, sigalrm);
-        if (alarm(MAXWAIT) < 0) {
-                (void) sprintf(errmsg, "%s:  alarm", caller);
-                fatalSys(errmsg);
-        }
-
-        /*
-         * Set flags argument and issue getmsg().
-         */
-        *flagsp = 0;
-        if ((rc = getmsg(fd, ctlp, datap, flagsp)) < 0) {
-                (void) sprintf(errmsg, "%s:  getmsg", caller);
-                fatalSys(errmsg);
-        }
-
-        /*
-         * Stop timer.
-         */
-        if (alarm(0) < 0) {
-                (void) sprintf(errmsg, "%s:  alarm", caller);
-                fatalSys(errmsg);
-        }
-
-        /*
-         * Check for MOREDATA and/or MORECTL.
-         */
-        if ((rc & (MORECTL | MOREDATA)) == (MORECTL | MOREDATA)) {
-		char buffer[256]; 
-		sprintf(buffer, "%s:  MORECTL|MOREDATA", caller);
-		rp_fatal(buffer);
-	}
-                
-        if (rc & MORECTL) {
-		char buffer[256];
-		sprintf(buffer, "%s:  MORECTL", caller);
-		rp_fatal(buffer); 
-	}
-        
-        if (rc & MOREDATA) {
-		char buffer[256]; 
-		sprintf(buffer, "%s:  MOREDATA", caller);
-		rp_fatal(buffer);
-	}
-
-        /*
-         * Check for at least sizeof (long) control data portion.
-         */
-        if (ctlp->len < sizeof (long)) {
-		char buffer[256]; 
-		sprintf(buffer, "getmsg:  control portion length < sizeof (long):  %d", ctlp->len);
-		rp_fatal(buffer); 
-	}
-}
-
-void sigalrm(int sig)
-{
-        (void) rp_fatal("sigalrm:  TIMEOUT");
-}
-
-void expecting(int prim, union DL_primitives *dlp)
-{
-        if (dlp->dl_primitive != (u_long)prim) {
-		char buffer[256]; 
-		sprintf(buffer, "expected %s got %s", dlprim(prim), dlprim(dlp->dl_primitive));
-		rp_fatal(buffer); 
-		exit(1); 
-	}
-}
-
-char *dlprim(u_long prim)
-{
-        static  char    primbuf[80];
-
-        switch ((int)prim) {
-                CASERET(DL_INFO_REQ);
-                CASERET(DL_INFO_ACK);
-                CASERET(DL_ATTACH_REQ);
-                CASERET(DL_DETACH_REQ);
-                CASERET(DL_BIND_REQ);
-                CASERET(DL_BIND_ACK);
-                CASERET(DL_UNBIND_REQ);
-                CASERET(DL_OK_ACK);
-                CASERET(DL_ERROR_ACK);
-                CASERET(DL_SUBS_BIND_REQ);
-                CASERET(DL_SUBS_BIND_ACK);
-                CASERET(DL_UNITDATA_REQ);
-                CASERET(DL_UNITDATA_IND);
-                CASERET(DL_UDERROR_IND);
-                CASERET(DL_UDQOS_REQ);
-                CASERET(DL_CONNECT_REQ);
-                CASERET(DL_CONNECT_IND);
-                CASERET(DL_CONNECT_RES);
-                CASERET(DL_CONNECT_CON);
-                CASERET(DL_TOKEN_REQ);
-                CASERET(DL_TOKEN_ACK);
-                CASERET(DL_DISCONNECT_REQ);
-                CASERET(DL_DISCONNECT_IND);
-                CASERET(DL_RESET_REQ);
-                CASERET(DL_RESET_IND);
-                CASERET(DL_RESET_RES);
-                CASERET(DL_RESET_CON);
-                default:
-                        (void) sprintf(primbuf, "unknown primitive 0x%lx", prim);
-                        return (primbuf);
-        }
-}
-
-#endif /* USE_DLPI */
diff --git a/mdk-stage1/rp-pppoe/src/install-sh b/mdk-stage1/rp-pppoe/src/install-sh
deleted file mode 100755
index 58719246f..000000000
--- a/mdk-stage1/rp-pppoe/src/install-sh
+++ /dev/null
@@ -1,238 +0,0 @@
-#! /bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-#
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-	else
-		instcmd=mkdir
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/src/md5.c b/mdk-stage1/rp-pppoe/src/md5.c
deleted file mode 100644
index 5b7a0d7b2..000000000
--- a/mdk-stage1/rp-pppoe/src/md5.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * This code implements the MD5 message-digest algorithm.
- * The algorithm is due to Ron Rivest.  This code was
- * written by Colin Plumb in 1993, no copyright is claimed.
- * This code is in the public domain; do with it what you wish.
- *
- * Equivalent code is available from RSA Data Security, Inc.
- * This code has been tested against that, and is equivalent,
- * except that you don't need to include two pages of legalese
- * with every copy.
- *
- * To compute the message digest of a chunk of bytes, declare an
- * MD5Context structure, pass it to MD5Init, call MD5Update as
- * needed on buffers full of bytes, and then call MD5Final, which
- * will fill a supplied 16-byte array with the digest.
- */
-#include <string.h>		/* for memcpy() */
-#include "md5.h"
-
-void byteReverse(unsigned char *buf, unsigned longs);
-
-/*
- * Note: this code is harmless on little-endian machines.
- */
-void byteReverse(unsigned char *buf, unsigned longs)
-{
-    uint32 t;
-    do {
-	t = (uint32) ((unsigned) buf[3] << 8 | buf[2]) << 16 |
-	    ((unsigned) buf[1] << 8 | buf[0]);
-	*(uint32 *) buf = t;
-	buf += 4;
-    } while (--longs);
-}
-
-/*
- * Start MD5 accumulation.  Set bit count to 0 and buffer to mysterious
- * initialization constants.
- */
-void MD5Init(struct MD5Context *ctx)
-{
-    ctx->buf[0] = 0x67452301;
-    ctx->buf[1] = 0xefcdab89;
-    ctx->buf[2] = 0x98badcfe;
-    ctx->buf[3] = 0x10325476;
-
-    ctx->bits[0] = 0;
-    ctx->bits[1] = 0;
-}
-
-/*
- * Update context to reflect the concatenation of another buffer full
- * of bytes.
- */
-void MD5Update(struct MD5Context *ctx, unsigned char const *buf, unsigned len)
-{
-    uint32 t;
-
-    /* Update bitcount */
-
-    t = ctx->bits[0];
-    if ((ctx->bits[0] = t + ((uint32) len << 3)) < t)
-	ctx->bits[1]++;		/* Carry from low to high */
-    ctx->bits[1] += len >> 29;
-
-    t = (t >> 3) & 0x3f;	/* Bytes already in shsInfo->data */
-
-    /* Handle any leading odd-sized chunks */
-
-    if (t) {
-	unsigned char *p = (unsigned char *) ctx->in + t;
-
-	t = 64 - t;
-	if (len < t) {
-	    memcpy(p, buf, len);
-	    return;
-	}
-	memcpy(p, buf, t);
-	byteReverse(ctx->in, 16);
-	MD5Transform(ctx->buf, (uint32 *) ctx->in);
-	buf += t;
-	len -= t;
-    }
-    /* Process data in 64-byte chunks */
-
-    while (len >= 64) {
-	memcpy(ctx->in, buf, 64);
-	byteReverse(ctx->in, 16);
-	MD5Transform(ctx->buf, (uint32 *) ctx->in);
-	buf += 64;
-	len -= 64;
-    }
-
-    /* Handle any remaining bytes of data. */
-
-    memcpy(ctx->in, buf, len);
-}
-
-/*
- * Final wrapup - pad to 64-byte boundary with the bit pattern 
- * 1 0* (64-bit count of bits processed, MSB-first)
- */
-void MD5Final(unsigned char digest[16], struct MD5Context *ctx)
-{
-    unsigned count;
-    unsigned char *p;
-
-    /* Compute number of bytes mod 64 */
-    count = (ctx->bits[0] >> 3) & 0x3F;
-
-    /* Set the first char of padding to 0x80.  This is safe since there is
-       always at least one byte free */
-    p = ctx->in + count;
-    *p++ = 0x80;
-
-    /* Bytes of padding needed to make 64 bytes */
-    count = 64 - 1 - count;
-
-    /* Pad out to 56 mod 64 */
-    if (count < 8) {
-	/* Two lots of padding:  Pad the first block to 64 bytes */
-	memset(p, 0, count);
-	byteReverse(ctx->in, 16);
-	MD5Transform(ctx->buf, (uint32 *) ctx->in);
-
-	/* Now fill the next block with 56 bytes */
-	memset(ctx->in, 0, 56);
-    } else {
-	/* Pad block to 56 bytes */
-	memset(p, 0, count - 8);
-    }
-    byteReverse(ctx->in, 14);
-
-    /* Append length in bits and transform */
-    ((uint32 *) ctx->in)[14] = ctx->bits[0];
-    ((uint32 *) ctx->in)[15] = ctx->bits[1];
-
-    MD5Transform(ctx->buf, (uint32 *) ctx->in);
-    byteReverse((unsigned char *) ctx->buf, 4);
-    memcpy(digest, ctx->buf, 16);
-    memset(ctx, 0, sizeof(ctx));	/* In case it's sensitive */
-}
-
-#ifndef ASM_MD5
-
-/* The four core functions - F1 is optimized somewhat */
-
-/* #define F1(x, y, z) (x & y | ~x & z) */
-#define F1(x, y, z) (z ^ (x & (y ^ z)))
-#define F2(x, y, z) F1(z, x, y)
-#define F3(x, y, z) (x ^ y ^ z)
-#define F4(x, y, z) (y ^ (x | ~z))
-
-/* This is the central step in the MD5 algorithm. */
-#define MD5STEP(f, w, x, y, z, data, s) \
-	( w += f(x, y, z) + data,  w = w<<s | w>>(32-s),  w += x )
-
-/*
- * The core of the MD5 algorithm, this alters an existing MD5 hash to
- * reflect the addition of 16 longwords of new data.  MD5Update blocks
- * the data and converts bytes into longwords for this routine.
- */
-void MD5Transform(uint32 buf[4], uint32 const in[16])
-{
-    register uint32 a, b, c, d;
-
-    a = buf[0];
-    b = buf[1];
-    c = buf[2];
-    d = buf[3];
-
-    MD5STEP(F1, a, b, c, d, in[0] + 0xd76aa478, 7);
-    MD5STEP(F1, d, a, b, c, in[1] + 0xe8c7b756, 12);
-    MD5STEP(F1, c, d, a, b, in[2] + 0x242070db, 17);
-    MD5STEP(F1, b, c, d, a, in[3] + 0xc1bdceee, 22);
-    MD5STEP(F1, a, b, c, d, in[4] + 0xf57c0faf, 7);
-    MD5STEP(F1, d, a, b, c, in[5] + 0x4787c62a, 12);
-    MD5STEP(F1, c, d, a, b, in[6] + 0xa8304613, 17);
-    MD5STEP(F1, b, c, d, a, in[7] + 0xfd469501, 22);
-    MD5STEP(F1, a, b, c, d, in[8] + 0x698098d8, 7);
-    MD5STEP(F1, d, a, b, c, in[9] + 0x8b44f7af, 12);
-    MD5STEP(F1, c, d, a, b, in[10] + 0xffff5bb1, 17);
-    MD5STEP(F1, b, c, d, a, in[11] + 0x895cd7be, 22);
-    MD5STEP(F1, a, b, c, d, in[12] + 0x6b901122, 7);
-    MD5STEP(F1, d, a, b, c, in[13] + 0xfd987193, 12);
-    MD5STEP(F1, c, d, a, b, in[14] + 0xa679438e, 17);
-    MD5STEP(F1, b, c, d, a, in[15] + 0x49b40821, 22);
-
-    MD5STEP(F2, a, b, c, d, in[1] + 0xf61e2562, 5);
-    MD5STEP(F2, d, a, b, c, in[6] + 0xc040b340, 9);
-    MD5STEP(F2, c, d, a, b, in[11] + 0x265e5a51, 14);
-    MD5STEP(F2, b, c, d, a, in[0] + 0xe9b6c7aa, 20);
-    MD5STEP(F2, a, b, c, d, in[5] + 0xd62f105d, 5);
-    MD5STEP(F2, d, a, b, c, in[10] + 0x02441453, 9);
-    MD5STEP(F2, c, d, a, b, in[15] + 0xd8a1e681, 14);
-    MD5STEP(F2, b, c, d, a, in[4] + 0xe7d3fbc8, 20);
-    MD5STEP(F2, a, b, c, d, in[9] + 0x21e1cde6, 5);
-    MD5STEP(F2, d, a, b, c, in[14] + 0xc33707d6, 9);
-    MD5STEP(F2, c, d, a, b, in[3] + 0xf4d50d87, 14);
-    MD5STEP(F2, b, c, d, a, in[8] + 0x455a14ed, 20);
-    MD5STEP(F2, a, b, c, d, in[13] + 0xa9e3e905, 5);
-    MD5STEP(F2, d, a, b, c, in[2] + 0xfcefa3f8, 9);
-    MD5STEP(F2, c, d, a, b, in[7] + 0x676f02d9, 14);
-    MD5STEP(F2, b, c, d, a, in[12] + 0x8d2a4c8a, 20);
-
-    MD5STEP(F3, a, b, c, d, in[5] + 0xfffa3942, 4);
-    MD5STEP(F3, d, a, b, c, in[8] + 0x8771f681, 11);
-    MD5STEP(F3, c, d, a, b, in[11] + 0x6d9d6122, 16);
-    MD5STEP(F3, b, c, d, a, in[14] + 0xfde5380c, 23);
-    MD5STEP(F3, a, b, c, d, in[1] + 0xa4beea44, 4);
-    MD5STEP(F3, d, a, b, c, in[4] + 0x4bdecfa9, 11);
-    MD5STEP(F3, c, d, a, b, in[7] + 0xf6bb4b60, 16);
-    MD5STEP(F3, b, c, d, a, in[10] + 0xbebfbc70, 23);
-    MD5STEP(F3, a, b, c, d, in[13] + 0x289b7ec6, 4);
-    MD5STEP(F3, d, a, b, c, in[0] + 0xeaa127fa, 11);
-    MD5STEP(F3, c, d, a, b, in[3] + 0xd4ef3085, 16);
-    MD5STEP(F3, b, c, d, a, in[6] + 0x04881d05, 23);
-    MD5STEP(F3, a, b, c, d, in[9] + 0xd9d4d039, 4);
-    MD5STEP(F3, d, a, b, c, in[12] + 0xe6db99e5, 11);
-    MD5STEP(F3, c, d, a, b, in[15] + 0x1fa27cf8, 16);
-    MD5STEP(F3, b, c, d, a, in[2] + 0xc4ac5665, 23);
-
-    MD5STEP(F4, a, b, c, d, in[0] + 0xf4292244, 6);
-    MD5STEP(F4, d, a, b, c, in[7] + 0x432aff97, 10);
-    MD5STEP(F4, c, d, a, b, in[14] + 0xab9423a7, 15);
-    MD5STEP(F4, b, c, d, a, in[5] + 0xfc93a039, 21);
-    MD5STEP(F4, a, b, c, d, in[12] + 0x655b59c3, 6);
-    MD5STEP(F4, d, a, b, c, in[3] + 0x8f0ccc92, 10);
-    MD5STEP(F4, c, d, a, b, in[10] + 0xffeff47d, 15);
-    MD5STEP(F4, b, c, d, a, in[1] + 0x85845dd1, 21);
-    MD5STEP(F4, a, b, c, d, in[8] + 0x6fa87e4f, 6);
-    MD5STEP(F4, d, a, b, c, in[15] + 0xfe2ce6e0, 10);
-    MD5STEP(F4, c, d, a, b, in[6] + 0xa3014314, 15);
-    MD5STEP(F4, b, c, d, a, in[13] + 0x4e0811a1, 21);
-    MD5STEP(F4, a, b, c, d, in[4] + 0xf7537e82, 6);
-    MD5STEP(F4, d, a, b, c, in[11] + 0xbd3af235, 10);
-    MD5STEP(F4, c, d, a, b, in[2] + 0x2ad7d2bb, 15);
-    MD5STEP(F4, b, c, d, a, in[9] + 0xeb86d391, 21);
-
-    buf[0] += a;
-    buf[1] += b;
-    buf[2] += c;
-    buf[3] += d;
-}
-
-#endif
diff --git a/mdk-stage1/rp-pppoe/src/md5.h b/mdk-stage1/rp-pppoe/src/md5.h
deleted file mode 100644
index e264f686d..000000000
--- a/mdk-stage1/rp-pppoe/src/md5.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef MD5_H
-#define MD5_H
-
-#ifdef __alpha
-typedef unsigned int uint32;
-#else
-typedef unsigned long uint32;
-#endif
-
-struct MD5Context {
-	uint32 buf[4];
-	uint32 bits[2];
-	unsigned char in[64];
-};
-
-void MD5Init(struct MD5Context *context);
-void MD5Update(struct MD5Context *context, unsigned char const *buf,
-	       unsigned len);
-void MD5Final(unsigned char digest[16], struct MD5Context *context);
-void MD5Transform(uint32 buf[4], uint32 const in[16]);
-
-/*
- * This is needed to make RSAREF happy on some MS-DOS compilers.
- */
-typedef struct MD5Context MD5_CTX;
-
-#endif /* !MD5_H */
diff --git a/mdk-stage1/rp-pppoe/src/plugin.c b/mdk-stage1/rp-pppoe/src/plugin.c
deleted file mode 100644
index d1097e291..000000000
--- a/mdk-stage1/rp-pppoe/src/plugin.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/***********************************************************************
-*
-* plugin.c
-*
-* pppd plugin for kernel-mode PPPoE on Linux
-*
-* Copyright (C) 2001 by Roaring Penguin Software Inc., Michal Ostrowski
-* and Jamal Hadi Salim.
-* 
-* Much code and many ideas derived from pppoe plugin by Michal
-* Ostrowski and Jamal Hadi Salim, which carries this copyright:
-*
-* Copyright 2000 Michal Ostrowski <mostrows@styx.uwaterloo.ca>,
-*                Jamal Hadi Salim <hadi@cyberus.ca>
-* Borrows heavily from the PPPoATM plugin by Mitchell Blank Jr., 
-* which is based in part on work from Jens Axboe and Paul Mackerras.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version
-* 2 of the License, or (at your option) any later version.
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#define _GNU_SOURCE 1
-#include "pppoe.h"
-
-#include "pppd/pppd.h"
-#include "pppd/fsm.h"
-#include "pppd/lcp.h"
-#include "pppd/ipcp.h"
-#include "pppd/ccp.h"
-#include "pppd/pathnames.h"
-
-#include <linux/types.h>
-#include <syslog.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <signal.h>
-#include <net/ethernet.h>
-#include <net/if_arp.h>
-#include <linux/if_pppox.h>
-
-/* From sys-linux.c in pppd -- MUST FIX THIS! */
-extern int new_style_driver;
-
-static char *service = NULL;
-static char *acName = NULL;
-static char *existingSession = NULL;
-
-static option_t Options[] = {
-    { "rp_pppoe_service", o_string, &service,
-      "Desired PPPoE service name" },
-    { "rp_pppoe_ac",      o_string, &acName,
-      "Desired PPPoE access concentrator name" },
-    { "rp_pppoe_sess",    o_string, &existingSession,
-      "Attach to existing session (sessid:macaddr)" },
-    { NULL }
-};
-int (*OldDevnameHook)(const char *name) = NULL;
-static PPPoEConnection *conn = NULL;
-
-/**********************************************************************
- * %FUNCTION: PPPOEInitDevice
- * %ARGUMENTS:
- * None
- * %RETURNS:
- * 
- * %DESCRIPTION:
- * Initializes PPPoE device.
- ***********************************************************************/
-static int
-PPPOEInitDevice(void)
-{
-    conn = malloc(sizeof(PPPoEConnection));
-    if (!conn) {
-	fatal("Could not allocate memory for PPPoE session");
-    }
-    memset(conn, 0, sizeof(PPPoEConnection));
-    if (acName) {
-	SET_STRING(conn->acName, acName);
-    }
-    if (service) {
-	SET_STRING(conn->serviceName, acName);
-    }
-    SET_STRING(conn->ifName, devnam);
-    conn->discoverySocket = -1;
-    conn->sessionSocket = -1;
-    conn->useHostUniq = 1;
-    return 1;
-}
-
-/**********************************************************************
- * %FUNCTION: PPPOEConnectDevice
- * %ARGUMENTS:
- * None
- * %RETURNS:
- * Non-negative if all goes well; -1 otherwise
- * %DESCRIPTION:
- * Connects PPPoE device.
- ***********************************************************************/
-static int
-PPPOEConnectDevice(void)
-{
-    struct sockaddr_pppox sp;
-
-    strlcpy(ppp_devnam, devnam, sizeof(ppp_devnam));
-    if (existingSession) {
-	unsigned int mac[ETH_ALEN];
-	int i, ses;
-	if (sscanf(existingSession, "%d:%x:%x:%x:%x:%x:%x",
-		   &ses, &mac[0], &mac[1], &mac[2],
-		   &mac[3], &mac[4], &mac[5]) != 7) {
-	    fatal("Illegal value for rp_pppoe_sess option");
-	}
-	conn->session = htons(ses);
-	for (i=0; i<ETH_ALEN; i++) {
-	    conn->peerEth[i] = (unsigned char) mac[i];
-	}
-    } else {
-	discovery(conn);
-	if (conn->discoveryState != STATE_SESSION) {
-	    fatal("Unable to complete PPPoE Discovery");
-	}
-    }
-
-    /* Make the session socket */
-    conn->sessionSocket = socket(AF_PPPOX, SOCK_STREAM, PX_PROTO_OE);
-    if (conn->sessionSocket < 0) {
-	fatal("Failed to create PPPoE socket: %m");
-    }
-    sp.sa_family = AF_PPPOX;
-    sp.sa_protocol = PX_PROTO_OE;
-    sp.sa_addr.pppoe.sid = conn->session;
-    memcpy(sp.sa_addr.pppoe.dev, conn->ifName, IFNAMSIZ);
-    memcpy(sp.sa_addr.pppoe.remote, conn->peerEth, ETH_ALEN);
-    if (connect(conn->sessionSocket, (struct sockaddr *) &sp,
-		sizeof(struct sockaddr_pppox)) < 0) {
-	fatal("Failed to connect PPPoE socket: %d %m", errno);
-	return -1;
-    }
-    return conn->sessionSocket;
-}
-
-static void
-PPPOESendConfig(int unit, 
-		int mtu, 
-		u_int32_t asyncmap, 
-		int pcomp, 
-		int accomp)
-{
-    int sock;
-    struct ifreq ifr;
-    
-    if (mtu > MAX_PPPOE_MTU) {
-	warn("Couldn't increase MTU to %d", mtu);
-    }
-    sock = socket(AF_INET, SOCK_DGRAM, 0);
-    if (sock < 0) {
-	fatal("Couldn't create IP socket: %m");
-    }
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    ifr.ifr_mtu = mtu;
-    if (ioctl(sock, SIOCSIFMTU, &ifr) < 0) {
-	fatal("ioctl(SIOCSIFMTU): %m");
-    }
-    (void) close (sock);
-}
-
-
-static void
-PPPOERecvConfig(int unit, 
-		int mru, 
-		u_int32_t asyncmap, 
-		int pcomp, 
-		int accomp)
-{
-    if (mru > MAX_PPPOE_MTU) {
-	error("Couldn't increase MRU to %d", mru);
-    }
-}
-
-static void
-PPPOESetXaccm(int unit,
-	      ext_accm accm)
-{
-    /* Do nothing */
-}
-
-/**********************************************************************
- * %FUNCTION: PPPOEDisconnectDevice
- * %ARGUMENTS:
- * None
- * %RETURNS:
- * Nothing
- * %DESCRIPTION:
- * Disconnects PPPoE device
- ***********************************************************************/
-static void
-PPPOEDisconnectDevice(void)
-{
-    struct sockaddr_pppox sp;
-
-    sp.sa_family = AF_PPPOX;
-    sp.sa_protocol = PX_PROTO_OE;
-    sp.sa_addr.pppoe.sid = 0;
-    memcpy(sp.sa_addr.pppoe.dev, conn->ifName, IFNAMSIZ);
-    memcpy(sp.sa_addr.pppoe.remote, conn->peerEth, ETH_ALEN);
-    if (connect(conn->sessionSocket, (struct sockaddr *) &sp,
-		sizeof(struct sockaddr_pppox)) < 0) {
-	fatal("Failed to disconnect PPPoE socket: %d %m", errno);
-	return;
-    }
-    close(conn->sessionSocket);
-}
-
-static int
-PPPOESetSpeed(const char *speed)
-{
-    return 0;
-}
-
-static void
-PPPOEDeviceCheckHook(void)
-{
-    if (!options_for_dev(_PATH_ETHOPT, devnam)) {
-	exit(EXIT_OPTION_ERROR);
-    }
-}
-
-/**********************************************************************
- * %FUNCTION: PPPoEDevnameHook
- * %ARGUMENTS:
- * name -- name of device
- * %RETURNS:
- * 1 if we will handle this device; 0 otherwise.
- * %DESCRIPTION:
- * Checks if name is a valid interface name; if so, returns 1.  Also
- * sets up devnam (string representation of device) and sets devstat.st_mode
- * so S_ISCHR(devstat.st_mode) != 1 for internal pppd consumption.
- ***********************************************************************/
-static int
-PPPoEDevnameHook(const char *name)
-{
-    int r = 1;
-    int fd;
-    struct ifreq ifr;
-
-    /* Open a socket */
-    if ((fd = socket(PF_PACKET, SOCK_RAW, 0)) < 0) {
-	r = 0;
-    }
-
-    /* Try getting interface index */
-    if (r) {
-	strncpy(ifr.ifr_name, name, sizeof(ifr.ifr_name));
-	if (ioctl(fd, SIOCGIFINDEX, &ifr) < 0) {
-	    r = 0;
-	} else {
-	    if (ioctl(fd, SIOCGIFHWADDR, &ifr) < 0) {
-		r = 0;
-	    } else {
-		if (ifr.ifr_hwaddr.sa_family != ARPHRD_ETHER) {
-		    error("Interface %s not Ethernet", name);
-		    r=0;
-		}
-	    }
-	}
-    }
-
-    /* Close socket */
-    close(fd);
-    if (r) {
-	strncpy(devnam, name, sizeof(devnam));
-	if (device_check_hook != PPPOEDeviceCheckHook) {
-	    devstat.st_mode = S_IFSOCK;
-	    device_init_hook = PPPOEInitDevice;
-	    setspeed_hook = PPPOESetSpeed;
-	    device_check_hook = PPPOEDeviceCheckHook;
-	    connect_device_hook = PPPOEConnectDevice;
-	    disconnect_device_hook = PPPOEDisconnectDevice;
-	    send_config_hook = PPPOESendConfig;
-	    recv_config_hook = PPPOERecvConfig;
-	    set_xaccm_hook = PPPOESetXaccm;
-	    modem = 0;
-	    
-	    lcp_allowoptions[0].neg_accompression = 0;
-	    lcp_wantoptions[0].neg_accompression = 0;
-	    
-	    lcp_allowoptions[0].neg_asyncmap = 0;
-	    lcp_wantoptions[0].neg_asyncmap = 0;
-	    
-	    lcp_allowoptions[0].neg_pcompression = 0;
-	    lcp_wantoptions[0].neg_pcompression = 0;
-	    
-	    ccp_allowoptions[0].deflate = 0 ;
-	    ccp_wantoptions[0].deflate = 0 ;
-	    
-	    ipcp_allowoptions[0].neg_vj=0;
-	    ipcp_wantoptions[0].neg_vj=0;
-	    
-	    ccp_allowoptions[0].bsd_compress = 0;
-	    ccp_wantoptions[0].bsd_compress = 0;
-	    
-	    PPPOEInitDevice();
-	}
-	return 1;
-    }
-
-    if (OldDevnameHook) r = OldDevnameHook(name);
-    return r;
-}
-
-/**********************************************************************
- * %FUNCTION: plugin_init
- * %ARGUMENTS:
- * None
- * %RETURNS:
- * Nothing
- * %DESCRIPTION:
- * Initializes hooks for pppd plugin
- ***********************************************************************/
-void
-plugin_init(void)
-{
-    if (!new_style_driver) {
-	fatal("Linux kernel does not support PPPoE -- are you running 2.4.x?");
-    }
-    OldDevnameHook = setdevname_hook;
-    setdevname_hook = PPPoEDevnameHook;
-    add_options(Options);
-
-    info("Roaring Penguin PPPoE Plugin Initialized");
-}
-
-/**********************************************************************
-*%FUNCTION: fatalSys
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to stderr and syslog and exits.
-***********************************************************************/
-void
-fatalSys(char const *str)
-{
-    char buf[1024];
-    int i = errno;
-    sprintf(buf, "%.256s: %.256s", str, strerror(i));
-    printErr(buf);
-    sprintf(buf, "RP-PPPoE: %.256s: %.256s", str, strerror(i));
-    sendPADT(conn, buf);
-    exit(1);
-}
-
-/**********************************************************************
-*%FUNCTION: rp_fatal
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog and exits.
-***********************************************************************/
-void
-rp_fatal(char const *str)
-{
-    char buf[1024];
-    printErr(str);
-    sprintf(buf, "RP-PPPoE: %.256s", str);
-    sendPADT(conn, buf);
-    exit(1);
-}
-/**********************************************************************
-*%FUNCTION: sysErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to syslog.
-***********************************************************************/
-void
-sysErr(char const *str)
-{
-    rp_fatal(str);
-}
diff --git a/mdk-stage1/rp-pppoe/src/ppp.c b/mdk-stage1/rp-pppoe/src/ppp.c
deleted file mode 100644
index 72020a76c..000000000
--- a/mdk-stage1/rp-pppoe/src/ppp.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/***********************************************************************
-*
-* ppp.c
-*
-* Implementation of user-space PPPoE redirector for Linux.
-*
-* Functions for talking to PPP daemon
-*
-* Copyright (C) 2000 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#include <string.h>
-#include <errno.h>
-#include <stdlib.h>
-
-#ifdef HAVE_SYS_UIO_H
-#include <sys/uio.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef HAVE_N_HDLC
-#ifndef N_HDLC
-#include <linux/termios.h>
-#endif
-#endif
-
-int PPPState;
-int PPPPacketSize;
-unsigned char PPPXorValue;
-
-UINT16_t fcstab[256] = {
-    0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
-    0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
-    0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
-    0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
-    0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
-    0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
-    0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
-    0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
-    0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
-    0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
-    0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
-    0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
-    0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
-    0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
-    0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
-    0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
-    0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
-    0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
-    0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
-    0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
-    0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
-    0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
-    0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
-    0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
-    0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
-    0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
-    0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
-    0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
-    0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
-    0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
-    0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
-    0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
-};
-
-/**********************************************************************
-*%FUNCTION: syncReadFromPPP
-*%ARGUMENTS:
-* conn -- PPPoEConnection structure
-* packet -- buffer in which to place PPPoE packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Reads from a synchronous PPP device and builds and transmits a PPPoE
-* packet
-***********************************************************************/
-void
-syncReadFromPPP(PPPoEConnection *conn, PPPoEPacket *packet)
-{
-    int r;
-#ifndef HAVE_N_HDLC
-    struct iovec vec[2];
-    unsigned char dummy[2];
-    vec[0].iov_base = (void *) dummy;
-    vec[0].iov_len = 2;
-    vec[1].iov_base = (void *) packet->payload;
-    vec[1].iov_len = ETH_DATA_LEN - PPPOE_OVERHEAD;
-
-    /* Use scatter-read to throw away the PPP frame address bytes */
-    r = readv(0, vec, 2);
-#else
-    /* Bloody hell... readv doesn't work with N_HDLC line discipline... GRR! */
-    unsigned char buf[ETH_DATA_LEN - PPPOE_OVERHEAD + 2];
-    r = read(0, buf, ETH_DATA_LEN - PPPOE_OVERHEAD + 2);
-    if (r >= 2) {
-	memcpy(packet->payload, buf+2, r-2);
-    }
-#endif
-    if (r < 0) {
-	/* Catch the Linux "select" bug */
-	if (errno == EAGAIN) {
-	    rp_fatal("Linux select bug hit!  This message is harmless, but please ask the Linux kernel developers to fix it.");
-	}
-	fatalSys("read (syncReadFromPPP)");
-    }
-    if (r == 0) {
-	syslog(LOG_INFO, "end-of-file in syncReadFromPPP");
-	sendPADT(conn, "RP-PPPoE: EOF in syncReadFromPPP");
-	exit(0);
-    }
-
-    if (r < 2) {
-	rp_fatal("too few characters read from PPP (syncReadFromPPP)");
-    }
-    
-    sendSessionPacket(conn, packet, r-2);
-}
-
-/**********************************************************************
-*%FUNCTION: initPPP
-*%ARGUMENTS:
-* None
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Initializes the PPP state machine
-***********************************************************************/
-void
-initPPP(void)
-{
-    PPPState = STATE_WAITFOR_FRAME_ADDR;
-    PPPPacketSize = 0;
-    PPPXorValue = 0;
-
-}
-/**********************************************************************
-*%FUNCTION: asyncReadFromPPP
-*%ARGUMENTS:
-* conn -- PPPoEConnection structure
-* packet -- buffer in which to place PPPoE packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Reads from an async PPP device and builds a PPPoE packet to transmit
-***********************************************************************/
-void
-asyncReadFromPPP(PPPoEConnection *conn, PPPoEPacket *packet)
-{
-    unsigned char buf[READ_CHUNK];
-    unsigned char *ptr = buf;
-    unsigned char c;
-
-    int r;
-
-    r = read(0, buf, READ_CHUNK);
-    if (r < 0) {
-	fatalSys("read (asyncReadFromPPP)");
-    }
-
-    if (r == 0) {
-	syslog(LOG_INFO, "end-of-file in asyncReadFromPPP");
-	sendPADT(conn, "RP-PPPoE: EOF in asyncReadFromPPP");
-	exit(0);
-    }
-
-    while(r) {
-	if (PPPState == STATE_WAITFOR_FRAME_ADDR) {
-	    while(r) {
-		--r;
-		if (*ptr++ == FRAME_ADDR) {
-		    PPPState = STATE_DROP_PROTO;
-		    break;
-		}
-	    }
-	}
-	
-	/* Still waiting... */
-	if (PPPState == STATE_WAITFOR_FRAME_ADDR) return;
-
-	while(r && PPPState == STATE_DROP_PROTO) {
-	    --r;
-	    if (*ptr++ == (FRAME_CTRL ^ FRAME_ENC)) {
-		PPPState = STATE_BUILDING_PACKET;
-	    }
-	}
-
-	if (PPPState == STATE_DROP_PROTO) return;
-
-	/* Start building frame */
-	while(r && PPPState == STATE_BUILDING_PACKET) {
-	    --r;
-	    c = *ptr++;
-	    switch(c) {
-	    case FRAME_ESC:
-		PPPXorValue = FRAME_ENC;
-		break;
-	    case FRAME_FLAG:
-		if (PPPPacketSize < 2) {
-		    rp_fatal("Packet too short from PPP (asyncReadFromPPP)");
-		}
-		sendSessionPacket(conn, packet, PPPPacketSize-2);
-		PPPPacketSize = 0;
-		PPPXorValue = 0;
-		PPPState = STATE_WAITFOR_FRAME_ADDR;
-		break;
-	    default:
-		if (PPPPacketSize >= ETH_DATA_LEN - 4) {
-		    syslog(LOG_ERR, "Packet too big!  Check MTU on PPP interface");
-		    PPPPacketSize = 0;
-		    PPPXorValue = 0;
-		    PPPState = STATE_WAITFOR_FRAME_ADDR;
-		} else {
-		    packet->payload[PPPPacketSize++] = c ^ PPPXorValue;
-		    PPPXorValue = 0;
-		}
-	    }
-	}
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: pppFCS16
-*%ARGUMENTS:
-* fcs -- current fcs
-* cp -- a buffer's worth of data
-* len -- length of buffer "cp"
-*%RETURNS:
-* A new FCS
-*%DESCRIPTION:
-* Updates the PPP FCS.
-***********************************************************************/
-UINT16_t
-pppFCS16(UINT16_t fcs, 
-	 unsigned char * cp, 
-	 int len)
-{
-    while (len--)
-	fcs = (fcs >> 8) ^ fcstab[(fcs ^ *cp++) & 0xff];
-    
-    return (fcs);
-}
-
diff --git a/mdk-stage1/rp-pppoe/src/pppoe-server.c b/mdk-stage1/rp-pppoe/src/pppoe-server.c
deleted file mode 100644
index e43e63553..000000000
--- a/mdk-stage1/rp-pppoe/src/pppoe-server.c
+++ /dev/null
@@ -1,1247 +0,0 @@
-/***********************************************************************
-*
-* pppoe.h
-*
-* Implementation of a user-space PPPoE server
-*
-* Copyright (C) 2000 Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-* $Id$
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "config.h"
-
-#if defined(HAVE_NETPACKET_PACKET_H) || defined(HAVE_LINUX_IF_PACKET_H)
-#define _POSIX_SOURCE 1 /* For sigaction defines */
-#endif
-
-#define _BSD_SOURCE 1 /* for gethostname */
-
-#include "pppoe.h"
-#include "md5.h"
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#include <errno.h>
-#include <string.h>
-#include <stdlib.h>
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef HAVE_GETOPT_H
-#include <getopt.h>
-#endif
-
-#ifdef HAVE_SYS_WAIT_H
-#include <sys/wait.h>
-#endif
-
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
-#endif
-
-#include <signal.h>
-
-/* Hack for daemonizing */
-#define CLOSEFD 64
-
-/* Max. 64 sessions by default */
-#define DEFAULT_MAX_SESSIONS 64
-
-/* A list of client sessions */
-struct ClientSession *Sessions = NULL;
-
-/* The number of session slots */
-size_t NumSessionSlots;
-
-/* Offset of first session */
-size_t SessOffset = 0;
-
-/* Socket for client's discovery phases */
-int Socket = -1;
-
-/* Pipe written on reception of SIGCHLD */
-int Pipe[2] = {-1, -1};
-int ReapPending = 0;
-
-/* Synchronous mode */
-int Synchronous = 0;
-
-/* Random seed for cookie generation */
-#define SEED_LEN 16
-#define MD5_LEN 16
-#define COOKIE_LEN (MD5_LEN + sizeof(pid_t)) /* Cookie is 16-byte MD5 + PID of server */
-
-unsigned char CookieSeed[SEED_LEN];
-
-/* Default interface if no -I option given */
-#define DEFAULT_IF "eth0"
-char *IfName = NULL;
-
-/* Access concentrator name */
-char *ACName = NULL;
-
-/* Options to pass to pppoe process */
-char PppoeOptions[SMALLBUF] = "";
-
-/* Our local IP address */
-unsigned char LocalIP[IPV4ALEN] = {10, 0, 0, 1};
-unsigned char RemoteIP[IPV4ALEN] = {10, 67, 15, 1}; /* Counter STARTS here */
-
-PPPoETag hostUniq;
-PPPoETag relayId;
-PPPoETag receivedCookie;
-PPPoETag requestedService;
-
-#define HOSTNAMELEN 256
-
-static void startPPPD(struct ClientSession *sess);
-static void sendErrorPADS(int sock, unsigned char *source, unsigned char *dest,
-			  int errorTag, char *errorMsg);
-
-#define CHECK_ROOM(cursor, start, len) \
-do {\
-    if (((cursor)-(start))+(len) > MAX_PPPOE_PAYLOAD) { \
-        syslog(LOG_ERR, "Would create too-long packet"); \
-        return; \
-    } \
-} while(0)
-
-/* Use Linux kernel-mode PPPoE? */
-int UseLinuxKernelModePPPoE = 0;
-
-/**********************************************************************
-*%FUNCTION: parseAddressPool
-*%ARGUMENTS:
-* fname -- name of file containing IP address pool.
-* install -- if true, install IP addresses in sessions.
-*%RETURNS:
-* Number of valid IP addresses found.
-*%DESCRIPTION:
-* Reads a list of IP addresses from a file.
-***********************************************************************/
-static int
-parseAddressPool(char const *fname, int install)
-{
-    FILE *fp = fopen(fname, "r");
-    int numAddrs = 0;
-    unsigned int a, b, c, d;
-
-    if (!fp) {
-	sysErr("Cannot open address pool file");
-    }
-
-    while (!feof(fp)) {
-	if ((fscanf(fp, "%u.%u.%u.%u", &a, &b, &c, &d) == 4) &&
-	    a < 256 && b < 256 && c < 256 && d < 256) {
-	    if (install) {
-		Sessions[numAddrs].ip[0] = (unsigned char) a;
-		Sessions[numAddrs].ip[1] = (unsigned char) b;
-		Sessions[numAddrs].ip[2] = (unsigned char) c;
-		Sessions[numAddrs].ip[3] = (unsigned char) d;
-	    }
-	    numAddrs++;
-	}
-    }
-    if (!numAddrs) {
-	rp_fatal("No valid ip addresses found in pool file");
-    }
-    return numAddrs;
-}
-
-/**********************************************************************
-*%FUNCTION: parsePADITags
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks interesting tags out of a PADI packet
-***********************************************************************/
-void
-parsePADITags(UINT16_t type, UINT16_t len, unsigned char *data,
-	      void *extra)
-{
-    switch(type) {
-    case TAG_SERVICE_NAME:
-	/* Should do something -- currently ignored */
-	break;
-    case TAG_RELAY_SESSION_ID:
-	relayId.type = htons(type);
-	relayId.length = htons(len);
-	memcpy(relayId.payload, data, len);
-	break;
-    case TAG_HOST_UNIQ:
-	hostUniq.type = htons(type);
-	hostUniq.length = htons(len);
-	memcpy(hostUniq.payload, data, len);
-	break;
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: parsePADRTags
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks interesting tags out of a PADR packet
-***********************************************************************/
-void
-parsePADRTags(UINT16_t type, UINT16_t len, unsigned char *data,
-	      void *extra)
-{
-    switch(type) {
-    case TAG_RELAY_SESSION_ID:
-	relayId.type = htons(type);
-	relayId.length = htons(len);
-	memcpy(relayId.payload, data, len);
-	break;
-    case TAG_HOST_UNIQ:
-	hostUniq.type = htons(type);
-	hostUniq.length = htons(len);
-	memcpy(hostUniq.payload, data, len);
-	break;
-    case TAG_AC_COOKIE:
-	receivedCookie.type = htons(type);
-	receivedCookie.length = htons(len);
-	memcpy(receivedCookie.payload, data, len);
-	break;
-    case TAG_SERVICE_NAME:
-	requestedService.type = htons(type);
-	requestedService.length = htons(len);
-	memcpy(requestedService.payload, data, len);
-	break;
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: findSession
-*%ARGUMENTS:
-* pid -- PID of child which owns session.  If PID is 0, searches for
-* empty session slots.
-*%RETURNS:
-* A pointer to the session, or NULL if no such session found.
-*%DESCRIPTION:
-* Searches for specified session.
-**********************************************************************/
-struct ClientSession *
-findSession(pid_t pid)
-{
-    size_t i;
-    for (i=0; i<NumSessionSlots; i++) {
-	if (Sessions[i].pid == pid) {
-	    return &Sessions[i];
-	}
-    }
-    return NULL;
-}
-
-/**********************************************************************
-*%FUNCTION: reapSessions
-*%ARGUMENTS:
-* myAddr -- my Ethernet address
-* sock -- my discovery socket
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Reaps children which have exited and removes their sessions
-**********************************************************************/
-void
-reapSessions(unsigned char *myAddr, int sock)
-{
-    int status;
-    pid_t pid;
-    struct ClientSession *session;
-
-    /* Temporary structure for sending PADT's. */
-    PPPoEConnection conn;
-    memset(&conn, 0, sizeof(conn));
-
-    /* Initialize fields of conn which do not depend on peer */
-    memcpy(conn.myEth, myAddr, ETH_ALEN);
-    conn.useHostUniq = 0;
-    conn.discoverySocket = sock;
-
-    while((pid = waitpid(-1, &status, WNOHANG)) > 0) {
-	session = findSession(pid);
-	if (!session) {
-	    syslog(LOG_ERR, "Child %d died but couldn't find session!",
-		   (int) pid);
-	} else {
-	    syslog(LOG_INFO,
-		   "Session %d closed for client %02x:%02x:%02x:%02x:%02x:%02x (%d.%d.%d.%d)",
-		   ntohs(session->sess),
-		   session->eth[0], session->eth[1], session->eth[2],
-		   session->eth[3], session->eth[4], session->eth[5],
-		   (int) session->ip[0], (int) session->ip[1],
-		   (int) session->ip[2], (int) session->ip[3]);
-	    conn.session = session->sess;
-	    memcpy(conn.peerEth, session->eth, ETH_ALEN);
-	    if (session->recvdPADT) {
-		sendPADT(&conn, "RP-PPPoE: Received PADT from peer");
-	    } else {
-		sendPADT(&conn, "RP-PPPoE: Child pppd process terminated");
-	    }
-	    session->pid = 0;
-	}
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: fatalSys
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to stderr and syslog and exits.
-***********************************************************************/
-void
-fatalSys(char const *str)
-{
-    char buf[SMALLBUF];
-    snprintf(buf, SMALLBUF, "%s: %s", str, strerror(errno));
-    printErr(buf);
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: sysErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to syslog.
-***********************************************************************/
-void
-sysErr(char const *str)
-{
-    char buf[1024];
-    sprintf(buf, "%.256s: %.256s", str, strerror(errno));
-    printErr(buf);
-}
-
-/**********************************************************************
-*%FUNCTION: rp_fatal
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog and exits.
-***********************************************************************/
-void
-rp_fatal(char const *str)
-{
-    printErr(str);
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: genCookie
-*%ARGUMENTS:
-* peerEthAddr -- peer Ethernet address (6 bytes)
-* myEthAddr -- my Ethernet address (6 bytes)
-* seed -- random cookie seed to make things tasty (16 bytes)
-* cookie -- buffer which is filled with server PID and 
-*           md5 sum of previous items
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Forms the md5 sum of peer MAC address, our MAC address and seed, useful
-* in a PPPoE Cookie tag.
-***********************************************************************/
-void
-genCookie(unsigned char const *peerEthAddr,
-	  unsigned char const *myEthAddr,
-	  unsigned char const *seed,
-	  unsigned char *cookie)
-{
-    struct MD5Context ctx;
-    pid_t pid = getpid();
-
-    MD5Init(&ctx);
-    MD5Update(&ctx, peerEthAddr, ETH_ALEN);
-    MD5Update(&ctx, myEthAddr, ETH_ALEN);
-    MD5Update(&ctx, seed, SEED_LEN);
-    MD5Final(cookie, &ctx);
-    memcpy(cookie+MD5_LEN, &pid, sizeof(pid));
-}
-
-/**********************************************************************
-*%FUNCTION: processPADI
-*%ARGUMENTS:
-* sock -- Ethernet socket
-* myAddr -- my Ethernet address
-* packet -- PPPoE PADI packet
-* len -- length of received packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADO packet back to client
-***********************************************************************/
-void
-processPADI(int sock, unsigned char *myAddr,
-	    PPPoEPacket *packet, int len)
-{
-    PPPoEPacket pado;
-    PPPoETag acname;
-    PPPoETag servname;
-    PPPoETag cookie;
-    size_t acname_len;
-    unsigned char *cursor = pado.payload;
-    UINT16_t plen;
-
-    /* Ignore PADI's which don't come from a unicast address */
-    if (NOT_UNICAST(packet->ethHdr.h_source)) {
-	syslog(LOG_ERR, "PADI packet from non-unicast source address");
-	return;
-    }
-
-    acname.type = htons(TAG_AC_NAME);
-    acname_len = strlen(ACName);
-    acname.length = htons(acname_len);
-    memcpy(acname.payload, ACName, acname_len);
-
-    servname.type = htons(TAG_SERVICE_NAME);
-    servname.length = 0;
-
-    relayId.type = 0;
-    hostUniq.type = 0;
-    parsePacket(packet, parsePADITags, NULL);
-
-    /* Generate a cookie */
-    cookie.type = htons(TAG_AC_COOKIE);
-    cookie.length = htons(COOKIE_LEN);
-    genCookie(packet->ethHdr.h_source, myAddr, CookieSeed, cookie.payload);
-
-    /* Construct a PADO packet */
-    memcpy(pado.ethHdr.h_dest, packet->ethHdr.h_source, ETH_ALEN);
-    memcpy(pado.ethHdr.h_source, myAddr, ETH_ALEN);
-    pado.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
-    pado.ver = 1;
-    pado.type = 1;
-    pado.code = CODE_PADO;
-    pado.session = 0;
-    plen = TAG_HDR_SIZE + acname_len;
-
-    CHECK_ROOM(cursor, pado.payload, acname_len+TAG_HDR_SIZE);
-    memcpy(cursor, &acname, acname_len + TAG_HDR_SIZE);
-    cursor += acname_len + TAG_HDR_SIZE;
-
-    CHECK_ROOM(cursor, pado.payload, TAG_HDR_SIZE);
-    memcpy(cursor, &servname, TAG_HDR_SIZE);
-    cursor += TAG_HDR_SIZE;
-    plen += TAG_HDR_SIZE;
-
-    CHECK_ROOM(cursor, pado.payload, TAG_HDR_SIZE + COOKIE_LEN);
-    memcpy(cursor, &cookie, TAG_HDR_SIZE + COOKIE_LEN);
-    cursor += TAG_HDR_SIZE + COOKIE_LEN;
-    plen += TAG_HDR_SIZE + COOKIE_LEN;
-
-    if (relayId.type) {
-	CHECK_ROOM(cursor, pado.payload, ntohs(relayId.length) + TAG_HDR_SIZE);
-	memcpy(cursor, &relayId, ntohs(relayId.length) + TAG_HDR_SIZE);
-	cursor += ntohs(relayId.length) + TAG_HDR_SIZE;
-	plen += ntohs(relayId.length) + TAG_HDR_SIZE;
-    }
-    if (hostUniq.type) {
-	CHECK_ROOM(cursor, pado.payload, ntohs(hostUniq.length)+TAG_HDR_SIZE);
-	memcpy(cursor, &hostUniq, ntohs(hostUniq.length) + TAG_HDR_SIZE);
-	cursor += ntohs(hostUniq.length) + TAG_HDR_SIZE;
-	plen += ntohs(hostUniq.length) + TAG_HDR_SIZE;
-    }
-    pado.length = htons(plen);
-    sendPacket(NULL, sock, &pado, (int) (plen + HDR_SIZE));
-}
-
-/**********************************************************************
-*%FUNCTION: processPADT
-*%ARGUMENTS:
-* sock -- Ethernet socket
-* myAddr -- my Ethernet address
-* packet -- PPPoE PADT packet
-* len -- length of received packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Kills session whose session-ID is in PADT packet.
-***********************************************************************/
-void
-processPADT(int sock, unsigned char *myAddr,
-	    PPPoEPacket *packet, int len)
-{
-    size_t i;
-
-    /* Ignore PADT's not directed at us */
-    if (memcmp(packet->ethHdr.h_dest, myAddr, ETH_ALEN)) return;
-
-    /* Get session's index */
-    i = ntohs(packet->session) - 1 - SessOffset;
-    if (i >= NumSessionSlots) return;
-    if (Sessions[i].sess != packet->session) {
-	syslog(LOG_ERR, "Session index %u doesn't match session number %u",
-	       (unsigned int) i, (unsigned int) ntohs(packet->session));
-	return;
-    }
-    if (Sessions[i].pid) {
-	Sessions[i].recvdPADT = 1;
-	parsePacket(packet, parseLogErrs, NULL);
-	kill(Sessions[i].pid, SIGTERM);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: processPADR
-*%ARGUMENTS:
-* sock -- Ethernet socket
-* myAddr -- my Ethernet address
-* packet -- PPPoE PADR packet
-* len -- length of received packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADS packet back to client and starts a PPP session if PADR
-* packet is OK.
-***********************************************************************/
-void
-processPADR(int sock, unsigned char *myAddr,
-	    PPPoEPacket *packet, int len)
-{
-    unsigned char cookieBuffer[COOKIE_LEN];
-    struct ClientSession *cliSession;
-    pid_t child;
-    PPPoEPacket pads;
-    unsigned char *cursor = pads.payload;
-    UINT16_t plen;
-    PPPoETag servname;
-
-    /* Initialize some globals */
-    relayId.type = 0;
-    hostUniq.type = 0;
-    receivedCookie.type = 0;
-    requestedService.type = 0;
-
-    /* Ignore PADR's not directed at us */
-    if (memcmp(packet->ethHdr.h_dest, myAddr, ETH_ALEN)) return;
-
-    /* Ignore PADR's from non-unicast addresses */
-    if (NOT_UNICAST(packet->ethHdr.h_source)) {
-	syslog(LOG_ERR, "PADR packet from non-unicast source address");
-	return;
-    }
-
-    parsePacket(packet, parsePADRTags, NULL);
-
-    /* Check that everything's cool */
-    if (!receivedCookie.type) {
-	/* Drop it -- do not send error PADS */
-	return;
-    }
-
-    /* Is cookie kosher? */
-    if (receivedCookie.length != htons(COOKIE_LEN)) {
-	/* Drop it -- do not send error PADS */
-	return;
-    }
-
-    genCookie(packet->ethHdr.h_source, myAddr, CookieSeed, cookieBuffer);
-    if (memcmp(receivedCookie.payload, cookieBuffer, COOKIE_LEN)) {
-	/* Drop it -- do not send error PADS */
-	return;
-    }
-
-    /* Check service name -- we only offer service "" */
-    if (!requestedService.type) {
-	syslog(LOG_ERR, "Received PADR packet with no SERVICE_NAME tag");
-	sendErrorPADS(sock, myAddr, packet->ethHdr.h_source,
-		      TAG_SERVICE_NAME_ERROR, "RP-PPPoE: Server: No service name tag");
-	return;
-    }
-
-    if (requestedService.length) {
-	syslog(LOG_ERR, "Received PADR packet asking for unsupported service %.*s", (int) ntohs(requestedService.length), requestedService.payload);
-	sendErrorPADS(sock, myAddr, packet->ethHdr.h_source,
-		      TAG_SERVICE_NAME_ERROR, "RP-PPPoE: Server: Invalid service name tag");
-	return;
-    }
-
-    /* Looks cool... find a slot for the session */
-    cliSession = findSession(0);
-    if (!cliSession) {
-	syslog(LOG_ERR, "No client slots available (%02x:%02x:%02x:%02x:%02x:%02x)",
-	       (unsigned int) packet->ethHdr.h_source[0],
-	       (unsigned int) packet->ethHdr.h_source[1],
-	       (unsigned int) packet->ethHdr.h_source[2],
-	       (unsigned int) packet->ethHdr.h_source[3],
-	       (unsigned int) packet->ethHdr.h_source[4],
-	       (unsigned int) packet->ethHdr.h_source[5]);
-	sendErrorPADS(sock, myAddr, packet->ethHdr.h_source,
-		      TAG_AC_SYSTEM_ERROR, "RP-PPPoE: Server: No client slots available");
-	return;
-    }
-
-    /* Set up client session peer Ethernet address */
-    memcpy(cliSession->eth, packet->ethHdr.h_source, ETH_ALEN);
-    cliSession->recvdPADT = 0;
-
-    /* Create child process, send PADS packet back */
-    child = fork();
-    if (child < 0) {
-	sendErrorPADS(sock, myAddr, packet->ethHdr.h_source,
-		      TAG_AC_SYSTEM_ERROR, "RP-PPPoE: Server: Unable to start session process");
-	return;
-    }
-    if (child != 0) {
-	/* In the parent process.  Mark pid in session slot */
-	cliSession->pid = child;
-	return;
-    }
-
-    /* In the child process.  */
-
-    /* pppd has a nasty habit of killing all processes in its process group.
-       Start a new session to stop pppd from killing us! */
-    setsid();
-
-    /* Send PADS and Start pppd */
-    memcpy(pads.ethHdr.h_dest, packet->ethHdr.h_source, ETH_ALEN);
-    memcpy(pads.ethHdr.h_source, myAddr, ETH_ALEN);
-    pads.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
-    pads.ver = 1;
-    pads.type = 1;
-    pads.code = CODE_PADS;
-    
-    pads.session = cliSession->sess;
-    plen = 0;
-    
-    servname.type = htons(TAG_SERVICE_NAME);
-    servname.length = 0;
-    
-    memcpy(cursor, &servname, TAG_HDR_SIZE);
-    cursor += TAG_HDR_SIZE;
-    plen += TAG_HDR_SIZE;
-    
-    if (relayId.type) {
-	memcpy(cursor, &relayId, ntohs(relayId.length) + TAG_HDR_SIZE);
-	cursor += ntohs(relayId.length) + TAG_HDR_SIZE;
-	plen += ntohs(relayId.length) + TAG_HDR_SIZE;
-    }
-    if (hostUniq.type) {
-	memcpy(cursor, &hostUniq, ntohs(hostUniq.length) + TAG_HDR_SIZE);
-	cursor += ntohs(hostUniq.length) + TAG_HDR_SIZE;
-	plen += ntohs(hostUniq.length) + TAG_HDR_SIZE;
-    }
-    pads.length = htons(plen);
-    sendPacket(NULL, sock, &pads, (int) (plen + HDR_SIZE));
-    startPPPD(cliSession);
-}
-
-/**********************************************************************
-*%FUNCTION: childHandler
-*%ARGUMENTS:
-* sig -- signal number
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Called by SIGCHLD.  Writes one byte to Pipe to wake up the select
-* loop and cause reaping of dead sessions
-***********************************************************************/
-void
-childHandler(int sig)
-{
-    if (!ReapPending) {
-	ReapPending = 1;
-	write(Pipe[1], &ReapPending, 1);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: usage
-*%ARGUMENTS:
-* argv0 -- argv[0] from main
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints usage instructions
-***********************************************************************/
-void
-usage(char const *argv0)
-{
-    fprintf(stderr, "Usage: %s [options]\n", argv0);
-    fprintf(stderr, "Options:\n");
-#ifdef USE_BPF
-    fprintf(stderr, "   -I if_name     -- Specify interface (REQUIRED)\n");
-#else
-    fprintf(stderr, "   -I if_name     -- Specify interface (default %s.)\n",
-	    DEFAULT_IF);
-#endif
-    fprintf(stderr, "   -T timeout     -- Specify inactivity timeout in seconds.\n");
-    fprintf(stderr, "   -C name        -- Set access concentrator name.\n");
-    fprintf(stderr, "   -m MSS         -- Clamp incoming and outgoing MSS options.\n");
-    fprintf(stderr, "   -L ip          -- Set local IP address.\n");
-    fprintf(stderr, "   -R ip          -- Set start address of remote IP pool.\n");
-    fprintf(stderr, "   -p fname       -- Optain IP address pool from specified file.\n");
-    fprintf(stderr, "   -N num         -- Allow 'num' concurrent sessions.\n");
-    fprintf(stderr, "   -o offset      -- Assign session numbers starting at offset+1.\n");
-    fprintf(stderr, "   -f disc:sess   -- Set Ethernet frame types (hex).\n");
-    fprintf(stderr, "   -s             -- Use synchronous PPP mode.\n");
-#ifdef HAVE_LINUX_KERNEL_PPPOE
-    fprintf(stderr, "   -k             -- Use kernel-mode PPPoE.\n");
-#endif
-    fprintf(stderr, "   -h             -- Print usage information.\n\n");
-    fprintf(stderr, "PPPoE-Server Version %s, Copyright (C) 2001 Roaring Penguin Software Inc.\n", VERSION);
-    fprintf(stderr, "PPPoE-Server comes with ABSOLUTELY NO WARRANTY.\n");
-    fprintf(stderr, "This is free software, and you are welcome to redistribute it\n");
-    fprintf(stderr, "under the terms of the GNU General Public License, version 2\n");
-    fprintf(stderr, "or (at your option) any later version.\n");
-    fprintf(stderr, "http://www.roaringpenguin.com\n");
-}
-
-/**********************************************************************
-*%FUNCTION: main
-*%ARGUMENTS:
-* argc, argv -- usual suspects
-*%RETURNS:
-* Exit status
-*%DESCRIPTION:
-* Main program of PPPoE server
-***********************************************************************/
-int
-main(int argc, char **argv)
-{
-
-    FILE *fp;
-    int i;
-    int opt;
-    unsigned char myAddr[ETH_ALEN];
-    PPPoEPacket packet;
-    int len;
-    int sock;
-    int d[IPV4ALEN];
-    int beDaemon = 1;
-    struct sigaction act;
-    int maxFD;
-    unsigned int discoveryType, sessionType;
-    char *addressPoolFname = NULL;
-
-#ifndef HAVE_LINUX_KERNEL_PPPOE
-    char *options = "hI:C:L:R:T:m:FN:f:o:sp:";
-#else
-    char *options = "hI:C:L:R:T:m:FN:f:o:skp:";
-#endif
-
-    /* Initialize syslog */
-    openlog("pppoe-server", LOG_PID, LOG_DAEMON);
-
-    /* Default number of session slots */
-    NumSessionSlots = DEFAULT_MAX_SESSIONS;
-
-    /* Parse command-line options */
-    while((opt = getopt(argc, argv, options)) != -1) {
-	switch(opt) {
-#ifdef HAVE_LINUX_KERNEL_PPPOE
-	case 'k':
-	    UseLinuxKernelModePPPoE = 1;
-	    break;
-#endif
-	case 'p':
-	    addressPoolFname = optarg;
-	    break;
-	case 's':
-	    Synchronous = 1;
-	    /* Pass the Synchronous option on to pppoe */
-	    snprintf(PppoeOptions + strlen(PppoeOptions),
-		     SMALLBUF-strlen(PppoeOptions),
-		     " -s");
-	    break;
-	case 'f':
-	    if (sscanf(optarg, "%x:%x", &discoveryType, &sessionType) != 2) {
-		fprintf(stderr, "Illegal argument to -f: Should be disc:sess in hex\n");
-		exit(EXIT_FAILURE);
-	    }
-	    Eth_PPPOE_Discovery = (UINT16_t) discoveryType;
-	    Eth_PPPOE_Session   = (UINT16_t) sessionType;
-	    /* This option gets passed to pppoe */
-	    snprintf(PppoeOptions + strlen(PppoeOptions),
-		     SMALLBUF-strlen(PppoeOptions),
-		     " -%c %s", opt, optarg);
-	    break;
-	case 'F':
-	    beDaemon = 0;
-	    break;
-	case 'N':
-	    if (sscanf(optarg, "%d", &opt) != 1) {
-		usage(argv[0]);
-		exit(EXIT_FAILURE);
-	    }
-	    if (opt <= 0) {
-		fprintf(stderr, "-N: Value must be positive\n");
-		exit(EXIT_FAILURE);
-	    }
-	    NumSessionSlots = opt;
-	    break;
-	case 'o':
-	    if (sscanf(optarg, "%d", &opt) != 1) {
-		usage(argv[0]);
-		exit(EXIT_FAILURE);
-	    }
-	    if (opt < 0) {
-		fprintf(stderr, "-o: Value must be non-negative\n");
-		exit(EXIT_FAILURE);
-	    }
-	    SessOffset = (size_t) opt;
-	    break;
-
-	case 'I':
-	    SET_STRING(IfName, optarg);
-	    break;
-	case 'C':
-	    SET_STRING(ACName, optarg);
-	    break;
-	case 'L':
-	case 'R':
-	    /* Get local/remote IP address */
-	    if (sscanf(optarg, "%d.%d.%d.%d", &d[0], &d[1], &d[2], &d[3]) != 4) {
-		usage(argv[0]);
-		exit(EXIT_FAILURE);
-	    }
-	    for (i=0; i<IPV4ALEN; i++) {
-		if (d[i] < 0 || d[i] > 255) {
-		    usage(argv[0]);
-		    exit(EXIT_FAILURE);
-		}
-		if (opt == 'L') {
-		    LocalIP[i] = (unsigned char) d[i];
-		} else {
-		    RemoteIP[i] = (unsigned char) d[i];
-		}
-	    }
-	    break;
-	case 'T':
-	case 'm':
-	    /* These just get passed to pppoe */
-	    snprintf(PppoeOptions + strlen(PppoeOptions),
-		     SMALLBUF-strlen(PppoeOptions),
-		     " -%c %s", opt, optarg);
-	    break;
-	case 'h':
-	    usage(argv[0]);
-	    exit(EXIT_SUCCESS);
-	}
-    }
-    
-#ifdef USE_LINUX_PACKET
-#ifndef HAVE_STRUCT_SOCKADDR_LL
-    fprintf(stderr, "The PPPoE relay does not work on Linux 2.0 kernels.\n");
-    exit(EXIT_FAILURE);
-#endif
-#endif
-
-    if (!IfName) {
-	IfName = DEFAULT_IF;
-    }
-    
-    if (!ACName) {
-	ACName = malloc(HOSTNAMELEN);
-	if (gethostname(ACName, HOSTNAMELEN) < 0) {
-	    fatalSys("gethostname");
-	}
-    }
-
-    /* If address pool filename given, count number of addresses */
-    if (addressPoolFname) {
-	NumSessionSlots = parseAddressPool(addressPoolFname, 0);
-    }
-
-    /* Max 65534 - SessOffset sessions */
-    if (NumSessionSlots + SessOffset > 65534) {
-	fprintf(stderr, "-N and -o options must add up to at most 65534\n");
-	exit(EXIT_FAILURE);
-    }
-
-    /* Allocate memory for sessions */
-    Sessions = calloc(NumSessionSlots, sizeof(struct ClientSession));
-    if (!Sessions) {
-	rp_fatal("Cannot allocate memory for session slots");
-    }
-
-    /* Fill in remote IP addresses from pool */
-    if (addressPoolFname) {
-	(void) parseAddressPool(addressPoolFname, 1);
-    }
-
-    /* For testing -- generate sequential remote IP addresses */
-    for(i=0; i<NumSessionSlots; i++) {
-	Sessions[i].pid = 0;
-	Sessions[i].sess = htons(i+1+SessOffset);
-
-	if (!addressPoolFname) {
-	    memcpy(Sessions[i].ip, RemoteIP, sizeof(RemoteIP));
-	    
-	    /* Increment IP */
-	    RemoteIP[3]++;
-	    if (!RemoteIP[3]) {
-		RemoteIP[3] = 0;
-		RemoteIP[2]++;
-		if (!RemoteIP[2]) {
-		    RemoteIP[1]++;
-		    if (!RemoteIP[1]) {
-			RemoteIP[0]++;
-		    }
-		}
-	    }
-	}
-    }
-
-    /* Daemonize -- UNIX Network Programming, Vol. 1, Stevens */
-    if (beDaemon) {
-	i = fork();
-	if (i < 0) {
-	    fatalSys("fork");
-	} else if (i != 0) {
-	    /* parent */
-	    exit(EXIT_SUCCESS);
-	}
-	setsid();
-	signal(SIGHUP, SIG_IGN);
-	i = fork();
-	if (i < 0) {
-	    fatalSys("fork");
-	} else if (i != 0) {
-	    exit(EXIT_SUCCESS);
-	}
-
-	chdir("/");
-	closelog();
-	for (i=0; i<CLOSEFD; i++) close(i);
-	/* We nuked our syslog descriptor... */
-	openlog("pppoe-server", LOG_PID, LOG_DAEMON);
-    }
-
-    /* Initialize our random cookie.  Try /dev/urandom; if that fails,
-       use PID and rand() */
-    fp = fopen("/dev/urandom", "r");
-    if (fp) {
-	fread(&CookieSeed, 1, SEED_LEN, fp);
-	fclose(fp);
-    } else {
-	CookieSeed[0] = getpid() & 0xFF;
-	CookieSeed[1] = (getpid() >> 8) & 0xFF;
-	for (i=2; i<SEED_LEN; i++) {
-	    CookieSeed[i] = (rand() >> (i % 9)) & 0xFF;
-	}
-    }
-    
-    sock = openInterface(IfName, Eth_PPPOE_Discovery, myAddr);
-
-    /* Set signal handler for SIGCHLD */
-    act.sa_handler = childHandler;
-    sigemptyset(&act.sa_mask);
-    act.sa_flags = SA_NOCLDSTOP | SA_RESTART;
-    if (sigaction(SIGCHLD, &act, NULL) < 0) {
-	fatalSys("sigaction");
-    }
-
-    /* Set up pipe for signal handler */
-    if (pipe(Pipe) < 0) {
-	fatalSys("pipe");
-    }
-
-    /* Main server loop */
-    maxFD = sock;
-    if (Pipe[0] > maxFD) maxFD = Pipe[0];
-    maxFD++;
-
-    for(;;) {
-	fd_set readable;
-	FD_ZERO(&readable);
-	FD_SET(sock, &readable);
-	FD_SET(Pipe[0], &readable);
-
-	while(1) {
-	    i = select(maxFD, &readable, NULL, NULL, NULL);
-	    if (i >= 0 || errno != EINTR) break;
-	}
-	if (i < 0) {
-	    fatalSys("select");
-	}
-
-	if (FD_ISSET(Pipe[0], &readable)) {
-	    /* Clear pipe */
-	    char buf[SMALLBUF];
-	    read(Pipe[0], buf, SMALLBUF);
-	}
-
-	if (ReapPending) {
-	    ReapPending = 0;
-	    reapSessions(myAddr, sock);
-	}
-	if (!FD_ISSET(sock, &readable)) {
-	    continue;
-	}
-
-	if (receivePacket(sock, &packet, &len) < 0) {
-	    continue;
-	}
-	
-	/* Check length */
-	if (ntohs(packet.length) + HDR_SIZE > len) {
-	    syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-		   (unsigned int) ntohs(packet.length));
-	    continue;
-	}
-
-	/* Sanity check on packet */
-	if (packet.ver != 1 || packet.type != 1) {
-	    /* Syslog an error */
-	    continue;
-	}
-	switch(packet.code) {
-	case CODE_PADI:
-	    processPADI(sock, myAddr, &packet, len);
-	    break;
-	case CODE_PADR:
-	    processPADR(sock, myAddr, &packet, len);
-	    break;
-	case CODE_PADT:
-	    /* Kill the child */
-	    processPADT(sock, myAddr, &packet, len);
-	    break;
-	case CODE_SESS:
-	    /* Ignore SESS -- children will handle them */
-	    break;
-	case CODE_PADO:
-	case CODE_PADS:
-  	    /* Ignore PADO and PADS totally */
-	    break;
-	default:
-	    /* Syslog an error */
-	    break;
-	}
-    }
-    return 0;
-}
-
-/**********************************************************************
-*%FUNCTION: sendErrorPADS
-*%ARGUMENTS:
-* sock -- socket to write to
-* source -- source Ethernet address
-* dest -- destination Ethernet address
-* errorTag -- error tag
-* errorMsg -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADS packet with an error message
-***********************************************************************/
-void
-sendErrorPADS(int sock,
-	      unsigned char *source,
-	      unsigned char *dest,
-	      int errorTag,
-	      char *errorMsg)
-{
-    PPPoEPacket pads;
-    unsigned char *cursor = pads.payload;
-    UINT16_t plen;
-    PPPoETag err;
-    int elen = strlen(errorMsg);
-
-    memcpy(pads.ethHdr.h_dest, dest, ETH_ALEN);
-    memcpy(pads.ethHdr.h_source, source, ETH_ALEN);
-    pads.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
-    pads.ver = 1;
-    pads.type = 1;
-    pads.code = CODE_PADS;
-    
-    pads.session = htons(0);
-    plen = 0;
-    
-    err.type = htons(errorTag);
-    err.length = htons(elen);
-    
-    memcpy(err.payload, errorMsg, elen);
-    memcpy(cursor, &err, TAG_HDR_SIZE+elen);
-    cursor += TAG_HDR_SIZE + elen;
-    plen += TAG_HDR_SIZE + elen;
-    
-    if (relayId.type) {
-	memcpy(cursor, &relayId, ntohs(relayId.length) + TAG_HDR_SIZE);
-	cursor += ntohs(relayId.length) + TAG_HDR_SIZE;
-	plen += ntohs(relayId.length) + TAG_HDR_SIZE;
-    }
-    if (hostUniq.type) {
-	memcpy(cursor, &hostUniq, ntohs(hostUniq.length) + TAG_HDR_SIZE);
-	cursor += ntohs(hostUniq.length) + TAG_HDR_SIZE;
-	plen += ntohs(hostUniq.length) + TAG_HDR_SIZE;
-    }
-    pads.length = htons(plen);
-    sendPacket(NULL, sock, &pads, (int) (plen + HDR_SIZE));
-}
-	      
-
-/**********************************************************************
-*%FUNCTION: startPPPDUserMode
-*%ARGUMENTS:
-* session -- client session record
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Starts PPPD for user-mode PPPoE
-***********************************************************************/
-void
-startPPPDUserMode(struct ClientSession *session)
-{
-    /* Leave some room */
-    char *argv[20];
-
-    char buffer[SMALLBUF];
-
-    argv[0] = "pppd";
-    argv[1] = "pty";
-
-    snprintf(buffer, SMALLBUF, "%s -n -I %s -e %d:%02x:%02x:%02x:%02x:%02x:%02x%s",
-	     PPPOE_PATH, IfName,
-	     ntohs(session->sess),
-	     session->eth[0], session->eth[1], session->eth[2],
-	     session->eth[3], session->eth[4], session->eth[5],
-	     PppoeOptions);
-    argv[2] = strdup(buffer);
-    if (!argv[2]) {
-	/* TODO: Send a PADT */
-	exit(EXIT_FAILURE);
-    }
-
-    argv[3] = "file";
-    argv[4] = PPPOE_SERVER_OPTIONS;
-
-    snprintf(buffer, SMALLBUF, "%d.%d.%d.%d:%d.%d.%d.%d",
-	    (int) LocalIP[0], (int) LocalIP[1],
-	    (int) LocalIP[2], (int) LocalIP[3],
-	    (int) session->ip[0], (int) session->ip[1],
-	    (int) session->ip[2], (int) session->ip[3]);
-    syslog(LOG_INFO,
-	   "Session %d created for client %02x:%02x:%02x:%02x:%02x:%02x (%d.%d.%d.%d)",
-	   ntohs(session->sess),
-	   session->eth[0], session->eth[1], session->eth[2],
-	   session->eth[3], session->eth[4], session->eth[5],
-	   (int) session->ip[0], (int) session->ip[1],
-	   (int) session->ip[2], (int) session->ip[3]);
-    argv[5] = buffer; /* No need for strdup -- about to execv! */
-    argv[6] = "nodetach";
-    argv[7] = "noaccomp";
-    argv[8] = "nobsdcomp";
-    argv[9] = "nodeflate";
-    argv[10] = "nopcomp";
-    argv[11] = "novj";
-    argv[12] = "novjccomp";
-    argv[13] = "default-asyncmap";
-    if (Synchronous) {
-	argv[14] = "sync";
-	argv[15] = NULL;
-    } else {
-	argv[14] = NULL;
-    }
-
-    execv(PPPD_PATH, argv);
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: startPPPDLinuxKernelMode
-*%ARGUMENTS:
-* session -- client session record
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Starts PPPD for kernel-mode PPPoE on Linux
-***********************************************************************/
-void
-startPPPDLinuxKernelMode(struct ClientSession *session)
-{
-    /* Leave some room */
-    char *argv[20];
-
-    char buffer[SMALLBUF];
-
-    argv[0] = "pppd";
-    argv[1] = "plugin";
-    argv[2] = PLUGIN_PATH;
-    argv[3] = IfName;
-    snprintf(buffer, SMALLBUF, "%d:%02x:%02x:%02x:%02x:%02x:%02x",
-	     ntohs(session->sess),
-	     session->eth[0], session->eth[1], session->eth[2],
-	     session->eth[3], session->eth[4], session->eth[5]);
-    argv[4] = "rp_pppoe_sess";
-    argv[5] = strdup(buffer);
-    if (!argv[5]) {
-	/* TODO: Send a PADT */
-	exit(EXIT_FAILURE);
-    }
-    argv[6] = "file";
-    argv[7] = PPPOE_SERVER_OPTIONS;
-
-    snprintf(buffer, SMALLBUF, "%d.%d.%d.%d:%d.%d.%d.%d",
-	    (int) LocalIP[0], (int) LocalIP[1],
-	    (int) LocalIP[2], (int) LocalIP[3],
-	    (int) session->ip[0], (int) session->ip[1],
-	    (int) session->ip[2], (int) session->ip[3]);
-    syslog(LOG_INFO,
-	   "Session %d created for client %02x:%02x:%02x:%02x:%02x:%02x (%d.%d.%d.%d)",
-	   ntohs(session->sess),
-	   session->eth[0], session->eth[1], session->eth[2],
-	   session->eth[3], session->eth[4], session->eth[5],
-	   (int) session->ip[0], (int) session->ip[1],
-	   (int) session->ip[2], (int) session->ip[3]);
-    argv[8] = buffer;
-    argv[9] = "nodetach";
-    argv[10] = "noaccomp";
-    argv[11] = "nobsdcomp";
-    argv[12] = "nodeflate";
-    argv[13] = "nopcomp";
-    argv[14] = "novj";
-    argv[15] = "novjccomp";
-    argv[16] = "default-asyncmap";
-    argv[17] = NULL;
-    execv(PPPD_PATH, argv);
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: startPPPD
-*%ARGUMENTS:
-* session -- client session record
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Starts PPPD
-***********************************************************************/
-void
-startPPPD(struct ClientSession *session)
-{
-    if (UseLinuxKernelModePPPoE) startPPPDLinuxKernelMode(session);
-    else startPPPDUserMode(session);
-}
-
diff --git a/mdk-stage1/rp-pppoe/src/pppoe-sniff.c b/mdk-stage1/rp-pppoe/src/pppoe-sniff.c
deleted file mode 100644
index aa796547b..000000000
--- a/mdk-stage1/rp-pppoe/src/pppoe-sniff.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/***********************************************************************
-*
-* pppoe-sniff.c
-*
-* Sniff a network for likely-looking PPPoE frames and deduce the value
-* to supply to PPPOE_EXTRA in /etc/ppp/pppoe.conf.  USE AT YOUR OWN RISK.
-*
-* Copyright (C) 2000 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_GETOPT_H
-#include <getopt.h>
-#endif
-
-#include <errno.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdlib.h>
-
-#ifdef USE_DLPI
-#include <sys/dlpi.h>
-/* function declarations */
-void dlpromisconreq( int fd, u_long  level);
-void dlokack(int fd, char *bufp);
-#endif
-
-/* Default interface if no -I option given */
-#define DEFAULT_IF "eth0"
-
-/* Global vars */
-int SeenPADR = 0;
-int SeenSess = 0;
-UINT16_t SessType, DiscType;
-
-char *IfName = NULL;		/* Interface name */
-char *ServiceName = NULL;	/* Service name   */
-
-/**********************************************************************
-*%FUNCTION: parsePADRTags
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks interesting tags out of a PADR packet
-***********************************************************************/
-void
-parsePADRTags(UINT16_t type, UINT16_t len, unsigned char *data,
-	      void *extra)
-{
-    switch(type) {
-    case TAG_SERVICE_NAME:
-	ServiceName = malloc(len+1);
-	if (ServiceName) {
-	    memcpy(ServiceName, data, len);
-	    ServiceName[len] = 0;
-	}
-	break;
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: fatalSys
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to stderr and exits.
-***********************************************************************/
-void
-fatalSys(char const *str)
-{
-    char buf[1024];
-    sprintf(buf, "%.256s: %.256s", str, strerror(errno));
-    printErr(buf);
-    exit(1);
-}
-
-/**********************************************************************
-*%FUNCTION: rp_fatal
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog and exits.
-***********************************************************************/
-void
-rp_fatal(char const *str)
-{
-    printErr(str);
-    exit(1);
-}
-
-/**********************************************************************
-*%FUNCTION: usage
-*%ARGUMENTS:
-* argv0 -- program name
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints usage information and exits.
-***********************************************************************/
-void
-usage(char const *argv0)
-{
-    fprintf(stderr, "Usage: %s [options]\n", argv0);
-    fprintf(stderr, "Options:\n");
-    fprintf(stderr, "   -I if_name     -- Specify interface (default %s.)\n",
-	    DEFAULT_IF);
-    fprintf(stderr, "   -V             -- Print version and exit.\n");
-    fprintf(stderr, "\nPPPoE Version %s, Copyright (C) 2000 Roaring Penguin Software Inc.\n", VERSION);
-    fprintf(stderr, "PPPoE comes with ABSOLUTELY NO WARRANTY.\n");
-    fprintf(stderr, "This is free software, and you are welcome to redistribute it under the terms\n");
-    fprintf(stderr, "of the GNU General Public License, version 2 or any later version.\n");
-    fprintf(stderr, "http://www.roaringpenguin.com\n");
-    exit(0);
-}
-
-#if !defined(USE_LINUX_PACKET) && !defined(USE_DLPI)
-
-int
-main()
-{
-    fprintf(stderr, "Sorry, pppoe-sniff works only on Linux.\n");
-    return 1;
-}
-
-#else
-
-/**********************************************************************
-*%FUNCTION: main
-*%ARGUMENTS:
-* argc, argv -- count and values of command-line arguments
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Main program
-***********************************************************************/
-int
-main(int argc, char *argv[])
-{
-    int opt;
-    int sock;
-    PPPoEPacket pkt;
-    int size;
-#ifdef USE_DLPI
-    long buf[MAXDLBUF]; 
-#endif
-
-    while((opt = getopt(argc, argv, "I:V")) != -1) {
-	switch(opt) {
-	case 'I':
-	    SET_STRING(IfName, optarg);
-	    break;
-	case 'V':
-	    printf("pppoe-sniff: Roaring Penguin PPPoE Version %s\n", VERSION);
-	    exit(0);
-	default:
-	    usage(argv[0]);
-	}
-    }
-
-    /* Pick a default interface name */
-    if (!IfName) {
-	IfName = DEFAULT_IF;
-    }
-
-    /* Open the interface */
-#ifdef USE_DLPI
-	sock = openInterface(IfName, Eth_PPPOE_Discovery, NULL); 
-        dlpromisconreq(sock, DL_PROMISC_PHYS);
-        dlokack(sock, (char *)buf);
-	dlpromisconreq(sock, DL_PROMISC_SAP);
-	dlokack(sock, (char *)buf);
-#else
-
-    sock = openInterface(IfName, ETH_P_ALL,  NULL);
-
-#endif 
-
-    /* We assume interface is in promiscuous mode -- use ifconfig to
-       ensure this */
-    fprintf(stderr, "Sniffing for PADR.  Start your connection on another machine...\n");
-    while (!SeenPADR) {
-	if (receivePacket(sock, &pkt, &size) < 0) continue;
-	if (ntohs(pkt.length) + HDR_SIZE > size) continue;
-	if (pkt.ver != 1 || pkt.type != 1)       continue;
-	if (pkt.code != CODE_PADR)               continue;
-
-	/* Looks promising... parse it */
-	if (parsePacket(&pkt, parsePADRTags, NULL) < 0) {
-	    continue;
-	}
-	DiscType = ntohs(pkt.ethHdr.h_proto);
-	fprintf(stderr, "\nExcellent!  Sniffed a likely-looking PADR.\n");
-	break;
-    }
-    
-    while (!SeenSess) {
-	if (receivePacket(sock, &pkt, &size) < 0) continue;
-	if (ntohs(pkt.length) + HDR_SIZE > size) continue;
-	if (pkt.ver != 1 || pkt.type != 1)       continue;
-	if (pkt.code != CODE_SESS)               continue;
-
-	/* Cool! */
-	SessType = ntohs(pkt.ethHdr.h_proto);
-	break;
-    }
-
-    fprintf(stderr, "Wonderful!  Sniffed a likely-looking session packet.\n");
-    if ((ServiceName == NULL || *ServiceName == 0) &&
-	DiscType == ETH_PPPOE_DISCOVERY &&
-	SessType == ETH_PPPOE_SESSION) {
-	fprintf(stderr, "\nGreat!  It looks like a standard PPPoE service.\nYou should not need anything special in the configuration file.\n");
-	return 0;
-    }
-
-    fprintf(stderr, "\nOK, looks like you need something special in the configuration file.\nTry this:\n\n");
-    if (ServiceName != NULL && *ServiceName != 0) {
-	fprintf(stderr, "SERVICENAME='%s'\n", ServiceName);
-    }
-    if (DiscType != ETH_PPPOE_DISCOVERY || SessType != ETH_PPPOE_SESSION) {
-	fprintf(stderr, " PPPOE_EXTRA='-f %x:%x'\n", DiscType, SessType);
-    }
-    return 0;
-}
-
-#endif
-/**********************************************************************
-*%FUNCTION: sysErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to syslog.
-***********************************************************************/
-void
-sysErr(char const *str)
-{
-    char buf[1024];
-    sprintf(buf, "%.256s: %.256s", str, strerror(errno));
-    printErr(buf);
-}
diff --git a/mdk-stage1/rp-pppoe/src/pppoe.c b/mdk-stage1/rp-pppoe/src/pppoe.c
deleted file mode 100644
index 8ffe37248..000000000
--- a/mdk-stage1/rp-pppoe/src/pppoe.c
+++ /dev/null
@@ -1,834 +0,0 @@
-/***********************************************************************
-*
-* pppoe.c 
-*
-* Implementation of user-space PPPoE redirector for Linux.
-*
-* Copyright (C) 2000-2001 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#ifdef HAVE_GETOPT_H
-#include <getopt.h>
-#endif
-
-#include <string.h>
-#include <stdlib.h>
-#include <errno.h>
-
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
-#endif
-
-#ifdef HAVE_SYS_UIO_H
-#include <sys/uio.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef USE_LINUX_PACKET
-#include <sys/ioctl.h>
-#include <fcntl.h>
-#endif
-
-#include <signal.h>
-
-#ifdef HAVE_N_HDLC
-#ifndef N_HDLC
-#include <linux/termios.h>
-#endif
-#endif
-
-/* Default interface if no -I option given */
-#define DEFAULT_IF "eth0"
-
-/* Global variables -- options */
-int optInactivityTimeout = 0;	/* Inactivity timeout */
-int optClampMSS          = 0;	/* Clamp MSS to this value */
-int optSkipSession       = 0;	/* Perform discovery, print session info
-				   and exit */
-
-PPPoEConnection *Connection = NULL; /* Must be global -- used
-				       in signal handler */
-/***********************************************************************
-*%FUNCTION: sendSessionPacket
-*%ARGUMENTS:
-* conn -- PPPoE connection
-* packet -- the packet to send
-* len -- length of data to send
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Transmits a session packet to the peer.
-***********************************************************************/
-void
-sendSessionPacket(PPPoEConnection *conn, PPPoEPacket *packet, int len)
-{
-    packet->length = htons(len);
-    if (optClampMSS) {
-	clampMSS(packet, "outgoing", optClampMSS);
-    }
-    if (sendPacket(conn, conn->sessionSocket, packet, len + HDR_SIZE) < 0) {
-	exit(EXIT_FAILURE);
-    }
-    if (conn->debugFile) {
-	dumpPacket(conn->debugFile, packet, "SENT");
-	fprintf(conn->debugFile, "\n");
-	fflush(conn->debugFile);
-    }
-}
-
-#ifdef USE_BPF
-/**********************************************************************
-*%FUNCTION: sessionDiscoveryPacket
-*%ARGUMENTS:
-* packet -- the discovery packet that was received
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* We got a discovery packet during the session stage.  This most likely
-* means a PADT.
-*
-* The BSD version uses a single socket for both discovery and session
-* packets.  When a packet comes in over the wire once we are in
-* session mode, either syncReadFromEth() or asyncReadFromEth() will
-* have already read the packet and determined it to be a discovery
-* packet before passing it here.
-***********************************************************************/
-void
-sessionDiscoveryPacket(PPPoEPacket *packet)
-{
-    /* Sanity check */
-    if (packet->code != CODE_PADT) {
-	return;
-    }
-
-    /* It's a PADT, all right.  Is it for us? */
-    if (packet->session != Connection->session) {
-	/* Nope, ignore it */
-	return;
-    }
-
-    syslog(LOG_INFO,
-	   "Session terminated -- received PADT from access concentrator");
-    parsePacket(packet, parseLogErrs, NULL);
-    exit(EXIT_SUCCESS);
-}
-#else
-/**********************************************************************
-*%FUNCTION: sessionDiscoveryPacket
-*%ARGUMENTS:
-* conn -- PPPoE connection
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* We got a discovery packet during the session stage.  This most likely
-* means a PADT.
-***********************************************************************/
-void
-sessionDiscoveryPacket(PPPoEConnection *conn)
-{
-    PPPoEPacket packet;
-    int len;
-
-    if (receivePacket(conn->discoverySocket, &packet, &len) < 0) {
-	return;
-    }
-
-    /* Check length */
-    if (ntohs(packet.length) + HDR_SIZE > len) {
-	syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-	       (unsigned int) ntohs(packet.length));
-	return;
-    }
-
-    if (conn->debugFile) {
-	dumpPacket(conn->debugFile, &packet, "RCVD");
-	fprintf(conn->debugFile, "\n");
-	fflush(conn->debugFile);
-    }
-
-    if (packet.code != CODE_PADT) {
-	/* Not PADT; ignore it */
-	return;
-    }
-
-    /* It's a PADT, all right.  Is it for us? */
-    if (packet.session != conn->session) {
-	/* Nope, ignore it */
-	return;
-    }
-
-    syslog(LOG_INFO,
-	   "Session terminated -- received PADT from peer");
-    parsePacket(&packet, parseLogErrs, NULL);
-    exit(EXIT_SUCCESS);
-}
-#endif /* USE_BPF */
-
-/**********************************************************************
-*%FUNCTION: session
-*%ARGUMENTS:
-* conn -- PPPoE connection info
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Handles the "session" phase of PPPoE
-***********************************************************************/
-void
-session(PPPoEConnection *conn)
-{
-    fd_set readable;
-    PPPoEPacket packet;
-    struct timeval tv;
-    struct timeval *tvp = NULL;
-    int maxFD = 0;
-    int r;
-
-    /* Open a session socket */
-    conn->sessionSocket = openInterface(conn->ifName, Eth_PPPOE_Session, conn->myEth);
-
-    /* Prepare for select() */
-    if (conn->sessionSocket > maxFD)   maxFD = conn->sessionSocket;
-    if (conn->discoverySocket > maxFD) maxFD = conn->discoverySocket;
-    maxFD++;
-
-    /* Fill in the constant fields of the packet to save time */
-    memcpy(packet.ethHdr.h_dest, conn->peerEth, ETH_ALEN);
-    memcpy(packet.ethHdr.h_source, conn->myEth, ETH_ALEN);
-    packet.ethHdr.h_proto = htons(Eth_PPPOE_Session);
-    packet.ver = 1;
-    packet.type = 1;
-    packet.code = CODE_SESS;
-    packet.session = conn->session;
-
-    initPPP();
-
-#ifdef USE_BPF
-    /* check for buffered session data */
-    while (BPF_BUFFER_HAS_DATA) {
-	if (conn->synchronous) {
-	    syncReadFromEth(conn, conn->sessionSocket, optClampMSS);
-	} else {
-	    asyncReadFromEth(conn, conn->sessionSocket, optClampMSS);
-	}
-    }
-#endif
-
-    for (;;) {
-	if (optInactivityTimeout > 0) {
-	    tv.tv_sec = optInactivityTimeout;
-	    tv.tv_usec = 0;
-	    tvp = &tv;
-	}
-	FD_ZERO(&readable);
-	FD_SET(0, &readable);     /* ppp packets come from stdin */
-	if (conn->discoverySocket >= 0) {
-	    FD_SET(conn->discoverySocket, &readable);
-	}
-	FD_SET(conn->sessionSocket, &readable);
-	while(1) {
-	    r = select(maxFD, &readable, NULL, NULL, tvp);
-	    if (r >= 0 || errno != EINTR) break;
-	}
-	if (r < 0) {
-	    fatalSys("select (session)");
-	}
-	if (r == 0) { /* Inactivity timeout */
-	    syslog(LOG_ERR, "Inactivity timeout... something wicked happened");
-	    sendPADT(conn, "RP-PPPoE: Inactivity timeout");
-	    exit(EXIT_FAILURE);
-	}
-
-	/* Handle ready sockets */
-	if (FD_ISSET(0, &readable)) {
-	    if (conn->synchronous) {
-		syncReadFromPPP(conn, &packet);
-	    } else {
-		asyncReadFromPPP(conn, &packet);
-	    }
-	}
-
-	if (FD_ISSET(conn->sessionSocket, &readable)) {
-	    do {
-		if (conn->synchronous) {
-		    syncReadFromEth(conn, conn->sessionSocket, optClampMSS);
-		} else {
-		    asyncReadFromEth(conn, conn->sessionSocket, optClampMSS);
-		}
-	    } while (BPF_BUFFER_HAS_DATA);
-	}
-
-#ifndef USE_BPF	
-	/* BSD uses a single socket, see *syncReadFromEth() */
-	/* for calls to sessionDiscoveryPacket() */
-	if (conn->discoverySocket >= 0) {
-	    if (FD_ISSET(conn->discoverySocket, &readable)) {
-		sessionDiscoveryPacket(conn);
-	    }
-	}
-#endif
-
-    }
-}
-
-
-/***********************************************************************
-*%FUNCTION: sigPADT
-*%ARGUMENTS:
-* src -- signal received
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* If an established session exists send PADT to terminate from session
-*  from our end
-***********************************************************************/
-void
-sigPADT(int src)
-{
-  syslog(LOG_DEBUG,"Received signal %d.",(int)src);
-  sendPADT(Connection, "RP-PPPoE: Received signal");
-  exit(EXIT_SUCCESS);
-}
-
-/**********************************************************************
-*%FUNCTION: usage
-*%ARGUMENTS:
-* argv0 -- program name
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints usage information and exits.
-***********************************************************************/
-void
-usage(char const *argv0)
-{
-    fprintf(stderr, "Usage: %s [options]\n", argv0);
-    fprintf(stderr, "Options:\n");
-#ifdef USE_BPF
-    fprintf(stderr, "   -I if_name     -- Specify interface (REQUIRED)\n");
-#else
-    fprintf(stderr, "   -I if_name     -- Specify interface (default %s.)\n",
-	    DEFAULT_IF);
-#endif
-    fprintf(stderr, "   -T timeout     -- Specify inactivity timeout in seconds.\n");
-    fprintf(stderr, "   -D filename    -- Log debugging information in filename.\n");
-    fprintf(stderr, "   -V             -- Print version and exit.\n");
-    fprintf(stderr, "   -A             -- Print access concentrator names and exit.\n");
-    fprintf(stderr, "   -S name        -- Set desired service name.\n");
-    fprintf(stderr, "   -C name        -- Set desired access concentrator name.\n");
-    fprintf(stderr, "   -U             -- Use Host-Unique to allow multiple PPPoE sessions.\n");
-    fprintf(stderr, "   -s             -- Use synchronous PPP encapsulation.\n");
-    fprintf(stderr, "   -m MSS         -- Clamp incoming and outgoing MSS options.\n");
-    fprintf(stderr, "   -p pidfile     -- Write process-ID to pidfile.\n");
-    fprintf(stderr, "   -e sess:mac    -- Skip discovery phase; use existing session.\n");
-    fprintf(stderr, "   -n             -- Do not open discovery socket.\n");
-    fprintf(stderr, "   -k             -- Kill a session with PADT (requires -e)\n");
-    fprintf(stderr, "   -d             -- Perform discovery, print session info and exit.\n");
-    fprintf(stderr, "   -f disc:sess   -- Set Ethernet frame types (hex).\n");
-    fprintf(stderr, "   -h             -- Print usage information.\n\n");
-    fprintf(stderr, "PPPoE Version %s, Copyright (C) 2001 Roaring Penguin Software Inc.\n", VERSION);
-    fprintf(stderr, "PPPoE comes with ABSOLUTELY NO WARRANTY.\n");
-    fprintf(stderr, "This is free software, and you are welcome to redistribute it under the terms\n");
-    fprintf(stderr, "of the GNU General Public License, version 2 or any later version.\n");
-    fprintf(stderr, "http://www.roaringpenguin.com\n");
-    exit(EXIT_SUCCESS);
-}
-
-/**********************************************************************
-*%FUNCTION: main
-*%ARGUMENTS:
-* argc, argv -- count and values of command-line arguments
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Main program
-***********************************************************************/
-int
-main(int argc, char *argv[])
-{
-    int opt;
-    int n;
-    unsigned int m[6];		/* MAC address in -e option */
-    unsigned int s;		/* Temporary to hold session */
-    FILE *pidfile;
-    unsigned int discoveryType, sessionType;
-
-    PPPoEConnection conn;
-
-#ifdef HAVE_N_HDLC
-    int disc = N_HDLC;
-    long flags;
-#endif
-
-    /* Initialize connection info */
-    memset(&conn, 0, sizeof(conn));
-    conn.discoverySocket = -1;
-    conn.sessionSocket = -1;
-
-    /* For signal handler */
-    Connection = &conn;
-
-    /* Initialize syslog */
-    openlog("pppoe", LOG_PID, LOG_DAEMON);
-
-    while((opt = getopt(argc, argv, "I:VAT:D:hS:C:Usm:np:e:kdf:")) != -1) {
-	switch(opt) {
-	case 'f':
-	    if (sscanf(optarg, "%x:%x", &discoveryType, &sessionType) != 2) {
-		fprintf(stderr, "Illegal argument to -f: Should be disc:sess in hex\n");
-		exit(EXIT_FAILURE);
-	    }
-	    Eth_PPPOE_Discovery = (UINT16_t) discoveryType;
-	    Eth_PPPOE_Session   = (UINT16_t) sessionType;
-	    break;
-	case 'd':
-	    optSkipSession = 1;
-	    break;
-
-	case 'k':
-	    conn.killSession = 1;
-	    break;
-
-	case 'n':
-	    /* Do not even open a discovery socket -- used when invoked 
-	       by pppoe-server */
-	    conn.noDiscoverySocket = 1;
-	    break;
-
-	case 'e':
-	    /* Existing session: "sess:xx:yy:zz:aa:bb:cc" where "sess" is
-	       session-ID, and xx:yy:zz:aa:bb:cc is MAC-address of peer */
-	    n = sscanf(optarg, "%u:%2x:%2x:%2x:%2x:%2x:%2x",
-		       &s, &m[0], &m[1], &m[2], &m[3], &m[4], &m[5]);
-	    if (n != 7) {
-		fprintf(stderr, "Illegal argument to -e: Should be sess:xx:yy:zz:aa:bb:cc\n");
-		exit(EXIT_FAILURE);
-	    }
-
-	    /* Copy MAC address of peer */
-	    for (n=0; n<6; n++) {
-		conn.peerEth[n] = (unsigned char) m[n];
-	    }
-
-	    /* Convert session */
-	    conn.session = htons(s);
-
-	    /* Skip discovery phase! */
-	    conn.skipDiscovery = 1;
-	    break;
-		       
-	case 'p':
-	    pidfile = fopen(optarg, "w");
-	    if (pidfile) {
-		fprintf(pidfile, "%lu\n", (unsigned long) getpid());
-		fclose(pidfile);
-	    }
-	    break;
-	case 'S':
-	    SET_STRING(conn.serviceName, optarg);
-	    break;
-	case 'C':
-	    SET_STRING(conn.acName, optarg);
-	    break;
-	case 's':
-	    conn.synchronous = 1;
-	    break;
-	case 'U':
-	    conn.useHostUniq = 1;
-	    break;
-	case 'D':
-	    conn.debugFile = fopen(optarg, "w");
-	    if (!conn.debugFile) {
-		fprintf(stderr, "Could not open %s: %s\n",
-			optarg, strerror(errno));
-		exit(EXIT_FAILURE);
-	    }
-	    fprintf(conn.debugFile, "rp-pppoe-%s\n", VERSION);
-	    fflush(conn.debugFile);
-	    break;
-	case 'T':
-	    optInactivityTimeout = (int) strtol(optarg, NULL, 10);
-	    if (optInactivityTimeout < 0) {
-		optInactivityTimeout = 0;
-	    }
-	    break;
-	case 'm':
-	    optClampMSS = (int) strtol(optarg, NULL, 10);
-	    if (optClampMSS < 536) {
-		fprintf(stderr, "-m: %d is too low (min 536)\n", optClampMSS);
-		exit(EXIT_FAILURE);
-	    }
-	    if (optClampMSS > 1452) {
-		fprintf(stderr, "-m: %d is too high (max 1452)\n", optClampMSS);
-		exit(EXIT_FAILURE);
-	    }
-	    break;
-	case 'I':
-	    SET_STRING(conn.ifName, optarg);
-	    break;
-	case 'V':
-	    printf("Roaring Penguin PPPoE Version %s\n", VERSION);
-	    exit(EXIT_SUCCESS);
-	case 'A':
-	    conn.printACNames = 1;
-	    break;
-	case 'h':
-	    usage(argv[0]);
-	    break;
-	default:
-	    usage(argv[0]);
-	}
-    }
-
-    /* Pick a default interface name */
-    if (!conn.ifName) {
-#ifdef USE_BPF
-	fprintf(stderr, "No interface specified (-I option)\n");
-	exit(EXIT_FAILURE);
-#else
-	SET_STRING(conn.ifName, DEFAULT_IF);
-#endif
-    }
-
-    /* Set signal handlers: send PADT on TERM, HUP and INT */
-    if (!conn.printACNames) {
-	signal(SIGTERM, sigPADT);
-	signal(SIGHUP, sigPADT);
-	signal(SIGINT, sigPADT);
-
-#ifdef HAVE_N_HDLC
-	if (conn.synchronous) {
-	    if (ioctl(0, TIOCSETD, &disc) < 0) {
-		printErr("Unable to set line discipline to N_HDLC -- synchronous mode probably will fail");
-	    } else {
-		syslog(LOG_INFO,
-		       "Changed pty line discipline to N_HDLC for synchronous mode");
-	    }
-	    /* There is a bug in Linux's select which returns a descriptor
-	     * as readable if N_HDLC line discipline is on, even if
-	     * it isn't really readable.  This return happens only when
-	     * select() times out.  To avoid blocking forever in read(),
-	     * make descriptor 0 non-blocking */
-	    flags = fcntl(0, F_GETFL);
-	    if (flags < 0) fatalSys("fcntl(F_GETFL)");
-	    if (fcntl(0, F_SETFL, (long) flags | O_NONBLOCK) < 0) {
-		fatalSys("fcntl(F_SETFL)");
-	    }
-	}
-#endif
-
-    }
-
-    discovery(&conn);
-    if (optSkipSession) {
-	printf("%u:%02x:%02x:%02x:%02x:%02x:%02x\n",
-	       ntohs(conn.session),
-	       conn.peerEth[0],
-	       conn.peerEth[1],
-	       conn.peerEth[2],
-	       conn.peerEth[3],
-	       conn.peerEth[4],
-	       conn.peerEth[5]);
-	exit(EXIT_SUCCESS);
-    }
-    session(&conn);
-    return 0;
-}
-
-/**********************************************************************
-*%FUNCTION: fatalSys
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to stderr and syslog and exits.
-***********************************************************************/
-void
-fatalSys(char const *str)
-{
-    char buf[1024];
-    sprintf(buf, "%.256s: %.256s", str, strerror(errno));
-    printErr(buf);
-    sendPADT(Connection, "RP-PPPoE: System call error");
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: sysErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to syslog.
-***********************************************************************/
-void
-sysErr(char const *str)
-{
-    char buf[1024];
-    sprintf(buf, "%.256s: %.256s", str, strerror(errno));
-    printErr(buf);
-}
-
-/**********************************************************************
-*%FUNCTION: rp_fatal
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog and exits.
-***********************************************************************/
-void
-rp_fatal(char const *str)
-{
-    char buf[1024];
-    printErr(str);
-    sprintf(buf, "RP-PPPoE: %.256s", str);
-    sendPADT(Connection, buf);
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: asyncReadFromEth
-*%ARGUMENTS:
-* conn -- PPPoE connection info
-* sock -- Ethernet socket
-* clampMss -- if non-zero, do MSS-clamping
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Reads a packet from the Ethernet interface and sends it to async PPP
-* device.
-***********************************************************************/
-void
-asyncReadFromEth(PPPoEConnection *conn, int sock, int clampMss)
-{
-    PPPoEPacket packet;
-    int len;
-    int plen;
-    int i;
-    unsigned char pppBuf[4096];
-    unsigned char *ptr = pppBuf;
-    unsigned char c;
-    UINT16_t fcs;
-    unsigned char header[2] = {FRAME_ADDR, FRAME_CTRL};
-    unsigned char tail[2];
-#ifdef USE_BPF
-    int type;
-#endif
-
-    if (receivePacket(sock, &packet, &len) < 0) {
-	return;
-    }
-
-    /* Check length */
-    if (ntohs(packet.length) + HDR_SIZE > len) {
-	syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-	       (unsigned int) ntohs(packet.length));
-	return;
-    }
-    if (conn->debugFile) {
-	dumpPacket(conn->debugFile, &packet, "RCVD");
-	fprintf(conn->debugFile, "\n");
-	fflush(conn->debugFile);
-    }
-
-#ifdef USE_BPF
-    /* Make sure this is a session packet before processing further */
-    type = etherType(&packet);
-    if (type == Eth_PPPOE_Discovery) {
-	sessionDiscoveryPacket(&packet);
-    } else if (type != Eth_PPPOE_Session) {
-	return;
-    }
-#endif
-
-    /* Sanity check */
-    if (packet.code != CODE_SESS) {
-	syslog(LOG_ERR, "Unexpected packet code %d", (int) packet.code);
-	return;
-    }
-    if (packet.ver != 1) {
-	syslog(LOG_ERR, "Unexpected packet version %d", (int) packet.ver);
-	return;
-    }
-    if (packet.type != 1) {
-	syslog(LOG_ERR, "Unexpected packet type %d", (int) packet.type);
-	return;
-    }
-    if (memcmp(packet.ethHdr.h_source, conn->peerEth, ETH_ALEN)) {
-	/* Not for us -- must be another session.  This is not an error,
-	   so don't log anything.  */
-	return;
-    }
-
-    if (packet.session != conn->session) {
-	/* Not for us -- must be another session.  This is not an error,
-	   so don't log anything.  */
-	return;
-    }
-    plen = ntohs(packet.length);
-    if (plen + HDR_SIZE > len) {
-	syslog(LOG_ERR, "Bogus length field in session packet %d (%d)",
-	       (int) plen, (int) len);
-	return;
-    }
-
-    /* Clamp MSS */
-    if (clampMss) {
-	clampMSS(&packet, "incoming", clampMss);
-    }
-
-    /* Compute FCS */
-    fcs = pppFCS16(PPPINITFCS16, header, 2);
-    fcs = pppFCS16(fcs, packet.payload, plen) ^ 0xffff;
-    tail[0] = fcs & 0x00ff;
-    tail[1] = (fcs >> 8) & 0x00ff;
-
-    /* Build a buffer to send to PPP */
-    *ptr++ = FRAME_FLAG;
-    *ptr++ = FRAME_ADDR;
-    *ptr++ = FRAME_ESC;
-    *ptr++ = FRAME_CTRL ^ FRAME_ENC;
-
-    for (i=0; i<plen; i++) {
-	c = packet.payload[i];
-	if (c == FRAME_FLAG || c == FRAME_ADDR || c == FRAME_ESC || c < 0x20) {
-	    *ptr++ = FRAME_ESC;
-	    *ptr++ = c ^ FRAME_ENC;
-	} else {
-	    *ptr++ = c;
-	}
-    }
-    for (i=0; i<2; i++) {
-	c = tail[i];
-	if (c == FRAME_FLAG || c == FRAME_ADDR || c == FRAME_ESC || c < 0x20) {
-	    *ptr++ = FRAME_ESC;
-	    *ptr++ = c ^ FRAME_ENC;
-	} else {
-	    *ptr++ = c;
-	}
-    }
-    *ptr++ = FRAME_FLAG;
-
-    /* Ship it out */
-    if (write(1, pppBuf, (ptr-pppBuf)) < 0) {
-	fatalSys("asyncReadFromEth: write");
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: syncReadFromEth
-*%ARGUMENTS:
-* conn -- PPPoE connection info
-* sock -- Ethernet socket
-* clampMss -- if true, clamp MSS.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Reads a packet from the Ethernet interface and sends it to sync PPP
-* device.
-***********************************************************************/
-void
-syncReadFromEth(PPPoEConnection *conn, int sock, int clampMss)
-{
-    PPPoEPacket packet;
-    int len;
-    int plen;
-    struct iovec vec[2];
-    unsigned char dummy[2];
-#ifdef USE_BPF
-    int type;
-#endif
-
-    if (receivePacket(sock, &packet, &len) < 0) {
-	return;
-    }
-
-    /* Check length */
-    if (ntohs(packet.length) + HDR_SIZE > len) {
-	syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-	       (unsigned int) ntohs(packet.length));
-	return;
-    }
-    if (conn->debugFile) {
-	dumpPacket(conn->debugFile, &packet, "RCVD");
-	fprintf(conn->debugFile, "\n");
-	fflush(conn->debugFile);
-    }
-
-#ifdef USE_BPF
-    /* Make sure this is a session packet before processing further */
-    type = etherType(&packet);
-    if (type == Eth_PPPOE_Discovery) {
-	sessionDiscoveryPacket(&packet);
-    } else if (type != Eth_PPPOE_Session) {
-	return;
-    }
-#endif
-
-    /* Sanity check */
-    if (packet.code != CODE_SESS) {
-	syslog(LOG_ERR, "Unexpected packet code %d", (int) packet.code);
-	return;
-    }
-    if (packet.ver != 1) {
-	syslog(LOG_ERR, "Unexpected packet version %d", (int) packet.ver);
-	return;
-    }
-    if (packet.type != 1) {
-	syslog(LOG_ERR, "Unexpected packet type %d", (int) packet.type);
-	return;
-    }
-    if (memcmp(packet.ethHdr.h_source, conn->peerEth, ETH_ALEN)) {
-	/* Not for us -- must be another session.  This is not an error,
-	   so don't log anything.  */
-	return;
-    }
-    if (packet.session != conn->session) {
-	/* Not for us -- must be another session.  This is not an error,
-	   so don't log anything.  */
-	return;
-    }
-    plen = ntohs(packet.length);
-    if (plen + HDR_SIZE > len) {
-	syslog(LOG_ERR, "Bogus length field in session packet %d (%d)",
-	       (int) plen, (int) len);
-	return;
-    }
-
-    /* Clamp MSS */
-    if (clampMss) {
-	clampMSS(&packet, "incoming", clampMss);
-    }
-
-    /* Ship it out */
-    vec[0].iov_base = (void *) dummy;
-    dummy[0] = FRAME_ADDR;
-    dummy[1] = FRAME_CTRL;
-    vec[0].iov_len = 2;
-    vec[1].iov_base = (void *) packet.payload;
-    vec[1].iov_len = plen;
-
-    if (writev(1, vec, 2) < 0) {
-	fatalSys("syncReadFromEth: write");
-    }
-}
-
diff --git a/mdk-stage1/rp-pppoe/src/pppoe.h b/mdk-stage1/rp-pppoe/src/pppoe.h
deleted file mode 100644
index da300c17d..000000000
--- a/mdk-stage1/rp-pppoe/src/pppoe.h
+++ /dev/null
@@ -1,331 +0,0 @@
-/***********************************************************************
-*
-* pppoe.h
-*
-* Declaration of various PPPoE constants
-*
-* Copyright (C) 2000 Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-* $Id$
-*
-***********************************************************************/
-
-#ifdef __sun__
-#define __EXTENSIONS__
-#endif
-
-#include "config.h"
-
-#if defined(HAVE_NETPACKET_PACKET_H) || defined(HAVE_LINUX_IF_PACKET_H)
-#define _POSIX_SOURCE 1 /* For sigaction defines */
-#endif
-
-#include <stdio.h>		/* For FILE */
-#include <sys/types.h>		/* For pid_t */
-
-/* How do we access raw Ethernet devices? */
-#undef USE_LINUX_PACKET
-#undef USE_BPF
-
-#if defined(HAVE_NETPACKET_PACKET_H) || defined(HAVE_LINUX_IF_PACKET_H)
-#define USE_LINUX_PACKET 1
-#elif defined(HAVE_NET_BPF_H)
-#define USE_BPF 1
-#elif defined(HAVE_SYS_DLPI_H)
-#define USE_DLPI
-#endif
-
-/* Sanity check */
-#if !defined(USE_BPF) && !defined(USE_LINUX_PACKET) && !defined(USE_DLPI)
-#error Unknown method for accessing raw Ethernet frames
-#endif
-
-#ifdef HAVE_SYS_CDEFS_H
-#include <sys/cdefs.h>
-#endif
-
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-
-/* Ugly header files on some Linux boxes... */
-#if defined(HAVE_LINUX_IF_H)
-#include <linux/if.h>
-#elif defined(HAVE_NET_IF_H)
-#include <net/if.h>
-#endif
-
-#ifdef HAVE_NET_IF_TYPES_H
-#include <net/if_types.h>
-#endif
-
-#ifdef HAVE_NET_IF_DL_H
-#include <net/if_dl.h>
-#endif
-
-/* I'm not sure why this is needed... I do not have OpenBSD */
-#if defined(__OpenBSD__)
-#include <net/ppp_defs.h>
-#include <net/if_ppp.h>
-#endif
-
-#ifdef USE_BPF
-extern int bpfSize;
-struct PPPoEPacketStruct;
-void sessionDiscoveryPacket(struct PPPoEPacketStruct *packet);
-#define BPF_BUFFER_IS_EMPTY (bpfSize <= 0)
-#define BPF_BUFFER_HAS_DATA (bpfSize > 0)
-#define ethhdr ether_header
-#define h_dest ether_dhost
-#define h_source ether_shost
-#define h_proto ether_type
-#define	ETH_DATA_LEN ETHERMTU
-#define	ETH_ALEN ETHER_ADDR_LEN
-#else
-#undef USE_BPF
-#define BPF_BUFFER_IS_EMPTY 1
-#define BPF_BUFFER_HAS_DATA 0
-#endif
-
-#ifdef USE_DLPI
-#include <sys/ethernet.h>
-#define ethhdr ether_header
-#define	ETH_DATA_LEN ETHERMTU
-#define	ETH_ALEN ETHERADDRL
-#define h_dest ether_dhost.ether_addr_octet
-#define h_source ether_shost.ether_addr_octet
-#define h_proto ether_type
-
-/* cloned from dltest.h */
-#define         MAXDLBUF        8192
-#define         MAXDLADDR       1024
-#define         MAXWAIT         15
-#define         OFFADDR(s, n)   (u_char*)((char*)(s) + (int)(n))
-#define         CASERET(s)      case s:  return ("s")
-
-#endif
-
-/* Define various integer types -- assumes a char is 8 bits */
-#if SIZEOF_UNSIGNED_SHORT == 2
-typedef unsigned short UINT16_t;
-#elif SIZEOF_UNSIGNED_INT == 2
-typedef unsigned int UINT16_t;
-#else
-#error Could not find a 16-bit integer type
-#endif
-
-#if SIZEOF_UNSIGNED_SHORT == 4
-typedef unsigned short UINT32_t;
-#elif SIZEOF_UNSIGNED_INT == 4
-typedef unsigned int UINT32_t;
-#elif SIZEOF_UNSIGNED_LONG == 4
-typedef unsigned long UINT32_t;
-#else
-#error Could not find a 16-bit integer type
-#endif
-
-#ifdef HAVE_LINUX_IF_ETHER_H
-#include <linux/if_ether.h>
-#endif
-
-#include <netinet/in.h>
-
-#ifdef HAVE_NETINET_IF_ETHER_H
-#include <sys/types.h>
-
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-#ifndef HAVE_SYS_DLPI_H
-#include <netinet/if_ether.h>
-#endif
-#endif
-
-
-
-/* Ethernet frame types according to RFC 2516 */
-#define ETH_PPPOE_DISCOVERY 0x8863
-#define ETH_PPPOE_SESSION   0x8864
-
-/* But some brain-dead peers disobey the RFC, so frame types are variables */
-extern UINT16_t Eth_PPPOE_Discovery;
-extern UINT16_t Eth_PPPOE_Session;
-
-/* PPPoE codes */
-#define CODE_PADI           0x09
-#define CODE_PADO           0x07
-#define CODE_PADR           0x19
-#define CODE_PADS           0x65
-#define CODE_PADT           0xA7
-#define CODE_SESS           0x00
-
-/* PPPoE Tags */
-#define TAG_END_OF_LIST        0x0000
-#define TAG_SERVICE_NAME       0x0101
-#define TAG_AC_NAME            0x0102
-#define TAG_HOST_UNIQ          0x0103
-#define TAG_AC_COOKIE          0x0104
-#define TAG_VENDOR_SPECIFIC    0x0105
-#define TAG_RELAY_SESSION_ID   0x0110
-#define TAG_SERVICE_NAME_ERROR 0x0201
-#define TAG_AC_SYSTEM_ERROR    0x0202
-#define TAG_GENERIC_ERROR      0x0203
-
-/* Discovery phase states */
-#define STATE_SENT_PADI     0
-#define STATE_RECEIVED_PADO 1
-#define STATE_SENT_PADR     2
-#define STATE_SESSION       3
-#define STATE_TERMINATED    4
-
-/* How many PADI/PADS attempts? */
-#define MAX_PADI_ATTEMPTS 3
-
-/* Initial timeout for PADO/PADS */
-#define PADI_TIMEOUT 5
-
-/* States for scanning PPP frames */
-#define STATE_WAITFOR_FRAME_ADDR 0
-#define STATE_DROP_PROTO         1
-#define STATE_BUILDING_PACKET    2
-
-/* Special PPP frame characters */
-#define FRAME_ESC    0x7D
-#define FRAME_FLAG   0x7E
-#define FRAME_ADDR   0xFF
-#define FRAME_CTRL   0x03
-#define FRAME_ENC    0x20
-
-#define IPV4ALEN     4
-#define SMALLBUF   256
-
-/* A PPPoE Packet, including Ethernet headers */
-typedef struct PPPoEPacketStruct {
-    struct ethhdr ethHdr;	/* Ethernet header */
-#ifdef PACK_BITFIELDS_REVERSED
-    unsigned int type:4;	/* PPPoE Type (must be 1) */
-    unsigned int ver:4;		/* PPPoE Version (must be 1) */
-#else
-    unsigned int ver:4;		/* PPPoE Version (must be 1) */
-    unsigned int type:4;	/* PPPoE Type (must be 1) */
-#endif
-    unsigned int code:8;	/* PPPoE code */
-    unsigned int session:16;	/* PPPoE session */
-    unsigned int length:16;	/* Payload length */
-    unsigned char payload[ETH_DATA_LEN]; /* A bit of room to spare */
-} PPPoEPacket;
-
-/* Header size of a PPPoE packet */
-#define PPPOE_OVERHEAD 6  /* type, code, session, length */
-#define HDR_SIZE (sizeof(struct ethhdr) + PPPOE_OVERHEAD)
-#define MAX_PPPOE_PAYLOAD (ETH_DATA_LEN - PPPOE_OVERHEAD)
-#define MAX_PPPOE_MTU (MAX_PPPOE_PAYLOAD - 2)
-
-/* PPPoE Tag */
-
-typedef struct PPPoETagStruct {
-    unsigned int type:16;	/* tag type */
-    unsigned int length:16;	/* Length of payload */
-    unsigned char payload[ETH_DATA_LEN]; /* A LOT of room to spare */
-} PPPoETag;
-/* Header size of a PPPoE tag */
-#define TAG_HDR_SIZE 4
-
-/* Chunk to read from stdin */
-#define READ_CHUNK 4096
-
-/* Function passed to parsePacket */
-typedef void ParseFunc(UINT16_t type,
-		       UINT16_t len,
-		       unsigned char *data,
-		       void *extra);
-
-/* Structures used by PPPoE server */
-struct ClientSession {
-    pid_t pid;			/* PID of child handling session */
-    unsigned char ip[IPV4ALEN];	/* IP address of peer */
-    UINT16_t sess;		/* Session number */
-    unsigned char eth[ETH_ALEN]; /* Peer's Ethernet address */
-    int recvdPADT;		/* Peer sent a PADT */
-};
-
-#define PPPINITFCS16    0xffff  /* Initial FCS value */
-
-/* Keep track of the state of a connection -- collect everything in
-   one spot */
-
-typedef struct PPPoEConnectionStruct {
-    int discoveryState;		/* Where we are in discovery */
-    int discoverySocket;	/* Raw socket for discovery frames */
-    int sessionSocket;		/* Raw socket for session frames */
-    unsigned char myEth[ETH_ALEN]; /* My MAC address */
-    unsigned char peerEth[ETH_ALEN]; /* Peer's MAC address */
-    UINT16_t session;		/* Session ID */
-    char *ifName;		/* Interface name */
-    char *serviceName;		/* Desired service name, if any */
-    char *acName;		/* Desired AC name, if any */
-    int synchronous;		/* Use synchronous PPP */
-    int useHostUniq;		/* Use Host-Uniq tag */
-    int printACNames;		/* Just print AC names */
-    int skipDiscovery;		/* Skip discovery */
-    int noDiscoverySocket;	/* Don't even open discovery socket */
-    int killSession;		/* Kill session and exit */
-    FILE *debugFile;		/* Debug file for dumping packets */
-    int numPADOs;		/* Number of PADO packets received */
-    PPPoETag cookie;		/* We have to send this if we get it */
-    PPPoETag relayId;		/* Ditto */
-} PPPoEConnection;
-
-/* Structure used to determine acceptable PADO or PADS packet */
-struct PacketCriteria {
-    PPPoEConnection *conn;
-    int acNameOK;
-    int serviceNameOK;
-};
-
-/* Function Prototypes */
-UINT16_t etherType(PPPoEPacket *packet);
-int openInterface(char const *ifname, UINT16_t type, unsigned char *hwaddr);
-int sendPacket(PPPoEConnection *conn, int sock, PPPoEPacket *pkt, int size);
-int receivePacket(int sock, PPPoEPacket *pkt, int *size);
-void fatalSys(char const *str);
-void rp_fatal(char const *str);
-void printErr(char const *str);
-void sysErr(char const *str);
-void dumpPacket(FILE *fp, PPPoEPacket *packet, char const *dir);
-void dumpHex(FILE *fp, unsigned char const *buf, int len);
-int parsePacket(PPPoEPacket *packet, ParseFunc *func, void *extra);
-void parseLogErrs(UINT16_t typ, UINT16_t len, unsigned char *data, void *xtra);
-void syncReadFromPPP(PPPoEConnection *conn, PPPoEPacket *packet);
-void asyncReadFromPPP(PPPoEConnection *conn, PPPoEPacket *packet);
-void asyncReadFromEth(PPPoEConnection *conn, int sock, int clampMss);
-void syncReadFromEth(PPPoEConnection *conn, int sock, int clampMss);
-char *strDup(char const *str);
-void sendPADT(PPPoEConnection *conn, char const *msg);
-void sendSessionPacket(PPPoEConnection *conn,
-		       PPPoEPacket *packet, int len);
-void initPPP(void);
-void clampMSS(PPPoEPacket *packet, char const *dir, int clampMss);
-UINT16_t computeTCPChecksum(unsigned char *ipHdr, unsigned char *tcpHdr);
-UINT16_t pppFCS16(UINT16_t fcs, unsigned char *cp, int len);
-void discovery(PPPoEConnection *conn);
-unsigned char *findTag(PPPoEPacket *packet, UINT16_t tagType,
-		       PPPoETag *tag);
-
-#define SET_STRING(var, val) do { if (var) free(var); var = strDup(val); } while(0);
-
-#define CHECK_ROOM(cursor, start, len) \
-do {\
-    if (((cursor)-(start))+(len) > MAX_PPPOE_PAYLOAD) { \
-        syslog(LOG_ERR, "Would create too-long packet"); \
-        return; \
-    } \
-} while(0)
-
-/* True if Ethernet address is broadcast or multicast */
-#define NOT_UNICAST(e) ((e[0] & 0x01) != 0)
-#define BROADCAST(e) ((e[0] & e[1] & e[2] & e[3] & e[4] & e[5]) == 0xFF)
-#define NOT_BROADCAST(e) ((e[0] & e[1] & e[2] & e[3] & e[4] & e[5]) != 0xFF)
diff --git a/mdk-stage1/rp-pppoe/src/relay.c b/mdk-stage1/rp-pppoe/src/relay.c
deleted file mode 100644
index 9738cb8a8..000000000
--- a/mdk-stage1/rp-pppoe/src/relay.c
+++ /dev/null
@@ -1,1541 +0,0 @@
-/***********************************************************************
-*
-* relay.c
-*
-* Implementation of PPPoE relay
-*
-* Copyright (C) 2001 Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-* $Id$
-*
-***********************************************************************/
-static char const RCSID[] =
-"$Id$";
-
-#define _GNU_SOURCE 1 /* For SA_RESTART */
-
-#include "relay.h"
-
-#include <signal.h>
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#ifdef HAVE_GETOPT_H
-#include <getopt.h>
-#endif
-
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
-#endif
-
-#ifdef HAVE_SYS_UIO_H
-#include <sys/uio.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-
-/* Interfaces (max MAX_INTERFACES) */
-PPPoEInterface Interfaces[MAX_INTERFACES];
-int NumInterfaces;
-
-/* Relay info */
-int NumSessions;
-int MaxSessions;
-PPPoESession *AllSessions;
-PPPoESession *FreeSessions;
-PPPoESession *ActiveSessions;
-
-SessionHash *AllHashes;
-SessionHash *FreeHashes;
-SessionHash *Buckets[HASHTAB_SIZE];
-
-volatile unsigned int Epoch = 0;
-volatile unsigned int CleanCounter = 0;
-
-/* How often to clean up stale sessions? */
-#define MIN_CLEAN_PERIOD 30  /* Minimum period to run cleaner */
-#define TIMEOUT_DIVISOR 20   /* How often to run cleaner per timeout period */
-unsigned int CleanPeriod = MIN_CLEAN_PERIOD;
-
-/* How long a session can be idle before it is cleaned up? */
-unsigned int IdleTimeout = MIN_CLEAN_PERIOD * TIMEOUT_DIVISOR;
-
-/* Pipe for breaking select() to initiate periodic cleaning */
-int CleanPipe[2];
-
-/* Our relay: if_index followed by peer_mac */
-#define MY_RELAY_TAG_LEN (sizeof(int) + ETH_ALEN)
-
-/* Hack for daemonizing */
-#define CLOSEFD 64
-
-/**********************************************************************
-*%FUNCTION: keepDescriptor
-*%ARGUMENTS:
-* fd -- a file descriptor
-*%RETURNS:
-* 1 if descriptor should NOT be closed during daemonizing; 0 otherwise.
-***********************************************************************/
-static int
-keepDescriptor(int fd)
-{
-    int i;
-    if (fd == CleanPipe[0] || fd == CleanPipe[1]) return 1;
-    for (i=0; i<NumInterfaces; i++) {
-	if (fd == Interfaces[i].discoverySock ||
-	    fd == Interfaces[i].sessionSock) return 1;
-    }
-    return 0;
-}
-
-/**********************************************************************
-*%FUNCTION: addTag
-*%ARGUMENTS:
-* packet -- a PPPoE packet
-* tag -- tag to add
-*%RETURNS:
-* -1 if no room in packet; number of bytes added otherwise.
-*%DESCRIPTION:
-* Inserts a tag as the first tag in a PPPoE packet.
-***********************************************************************/
-int
-addTag(PPPoEPacket *packet, PPPoETag const *tag)
-{
-    return insertBytes(packet, packet->payload, tag,
-		       ntohs(tag->length) + TAG_HDR_SIZE);
-}
-
-/**********************************************************************
-*%FUNCTION: insertBytes
-*%ARGUMENTS:
-* packet -- a PPPoE packet
-* loc -- location at which to insert bytes of data
-* bytes -- the data to insert
-* len -- length of data to insert
-*%RETURNS:
-* -1 if no room in packet; len otherwise.
-*%DESCRIPTION:
-* Inserts "len" bytes of data at location "loc" in "packet", moving all
-* other data up to make room.
-***********************************************************************/
-int
-insertBytes(PPPoEPacket *packet,
-	    unsigned char *loc,
-	    void const *bytes,
-	    int len)
-{
-    int toMove;
-    int plen = ntohs(packet->length);
-    /* Sanity checks */
-    if (loc < packet->payload ||
-	loc > packet->payload + plen ||
-	len + plen > MAX_PPPOE_PAYLOAD) {
-	return -1;
-    }
-
-    toMove = (packet->payload + plen) - loc;
-    memmove(loc+len, loc, toMove);
-    memcpy(loc, bytes, len);
-    packet->length = htons(plen + len);
-    return len;
-}
-
-/**********************************************************************
-*%FUNCTION: removeBytes
-*%ARGUMENTS:
-* packet -- a PPPoE packet
-* loc -- location at which to remove bytes of data
-* len -- length of data to remove
-*%RETURNS:
-* -1 if there was a problem, len otherwise
-*%DESCRIPTION:
-* Removes "len" bytes of data from location "loc" in "packet", moving all
-* other data down to close the gap
-***********************************************************************/
-int
-removeBytes(PPPoEPacket *packet,
-	    unsigned char *loc,
-	    int len)
-{
-    int toMove;
-    int plen = ntohs(packet->length);
-    /* Sanity checks */
-    if (len < 0 || len > plen ||
-	loc < packet->payload ||
-	loc + len > packet->payload + plen) {
-	return -1;
-    }
-
-    toMove = ((packet->payload + plen) - loc) - len;
-    memmove(loc, loc+len, toMove);
-    packet->length = htons(plen - len);
-    return len;
-}
-
-/**********************************************************************
-*%FUNCTION: usage
-*%ARGUMENTS:
-* argv0 -- program name
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints usage information and exits.
-***********************************************************************/
-void
-usage(char const *argv0)
-{
-    fprintf(stderr, "Usage: %s [options]\n", argv0);
-    fprintf(stderr, "Options:\n");
-    fprintf(stderr, "   -S if_name     -- Specify interface for PPPoE Server\n");
-    fprintf(stderr, "   -C if_name     -- Specify interface for PPPoE Client\n");
-    fprintf(stderr, "   -B if_name     -- Specify interface for both clients and server\n");
-    fprintf(stderr, "   -n nsess       -- Maxmimum number of sessions to relay\n");
-    fprintf(stderr, "   -i timeout     -- Idle timeout in seconds (0 = no timeout)\n");
-    fprintf(stderr, "   -F             -- Do not fork into background\n");
-    fprintf(stderr, "   -h             -- Print this help message\n");
-
-    fprintf(stderr, "\nPPPoE Version %s, Copyright (C) 2001 Roaring Penguin Software Inc.\n", VERSION);
-    fprintf(stderr, "PPPoE comes with ABSOLUTELY NO WARRANTY.\n");
-    fprintf(stderr, "This is free software, and you are welcome to redistribute it under the terms\n");
-    fprintf(stderr, "of the GNU General Public License, version 2 or any later version.\n");
-    fprintf(stderr, "http://www.roaringpenguin.com\n");
-    exit(EXIT_SUCCESS);
-}
-
-/**********************************************************************
-*%FUNCTION: main
-*%ARGUMENTS:
-* argc, argv -- usual suspects
-*%RETURNS:
-* EXIT_SUCCESS or EXIT_FAILURE
-*%DESCRIPTION:
-* Main program.  Options:
-* -C ifname           -- Use interface for PPPoE clients
-* -S ifname           -- Use interface for PPPoE servers
-* -B ifname           -- Use interface for both clients and servers
-* -n sessions         -- Maximum of "n" sessions
-***********************************************************************/
-int
-main(int argc, char *argv[])
-{
-    int opt;
-    int nsess = DEFAULT_SESSIONS;
-    struct sigaction sa;
-    int beDaemon = 1;
-    openlog("pppoe-relay", LOG_PID, LOG_DAEMON);
-
-    while((opt = getopt(argc, argv, "hC:S:B:n:i:F")) != -1) {
-	switch(opt) {
-	case 'h':
-	    usage(argv[0]);
-	    break;
-	case 'F':
-	    beDaemon = 0;
-	    break;
-	case 'C':
-	    addInterface(optarg, 1, 0);
-	    break;
-	case 'S':
-	    addInterface(optarg, 0, 1);
-	    break;
-	case 'B':
-	    addInterface(optarg, 1, 1);
-	    break;
-	case 'i':
-	    if (sscanf(optarg, "%u", &IdleTimeout) != 1) {
-		fprintf(stderr, "Illegal argument to -i: should be -i timeout\n");
-		exit(EXIT_FAILURE);
-	    }
-	    CleanPeriod = IdleTimeout / TIMEOUT_DIVISOR;
-	    if (CleanPeriod < MIN_CLEAN_PERIOD) CleanPeriod = MIN_CLEAN_PERIOD;
-	    break;
-	case 'n':
-	    if (sscanf(optarg, "%d", &nsess) != 1) {
-		fprintf(stderr, "Illegal argument to -n: should be -n #sessions\n");
-		exit(EXIT_FAILURE);
-	    }
-	    if (nsess < 1 || nsess > 65534) {
-		fprintf(stderr, "Illegal argument to -n: must range from 1 to 65534\n");
-		exit(EXIT_FAILURE);
-	    }
-	    break;
-	default:
-	    usage(argv[0]);
-	}
-    }
-
-#ifdef USE_LINUX_PACKET
-#ifndef HAVE_STRUCT_SOCKADDR_LL
-    fprintf(stderr, "The PPPoE relay does not work on Linux 2.0 kernels.\n");
-    exit(EXIT_FAILURE);
-#endif
-#endif
-
-    /* Check that at least two interfaces were defined */
-    if (NumInterfaces < 2) {
-	fprintf(stderr, "%s: Must define at least two interfaces\n",
-		argv[0]);
-	exit(EXIT_FAILURE);
-    }
-
-    /* Make a pipe for the cleaner */
-    if (pipe(CleanPipe) < 0) {
-	fatalSys("pipe");
-    }
-
-    /* Set up alarm handler */
-    sa.sa_handler = alarmHandler;
-    sigemptyset(&sa.sa_mask);
-    sa.sa_flags = SA_RESTART;
-    if (sigaction(SIGALRM, &sa, NULL) < 0) {
-	fatalSys("sigaction");
-    }
-    
-    /* Allocate memory for sessions, etc. */
-    initRelay(nsess);
-
-    /* Daemonize -- UNIX Network Programming, Vol. 1, Stevens */
-    if (beDaemon) {
-	int i;
-	i = fork();
-	if (i < 0) {
-	    fatalSys("fork");
-	} else if (i != 0) {
-	    /* parent */
-	    exit(0);
-	}
-	setsid();
-	signal(SIGHUP, SIG_IGN);
-	i = fork();
-	if (i < 0) {
-	    fatalSys("fork");
-	} else if (i != 0) {
-	    exit(0);
-	}
-
-	chdir("/");
-	closelog();
-	for (i=0; i<CLOSEFD; i++) {
-	    if (!keepDescriptor(i)) {
-		close(i);
-	    }
-	}
-	/* We nuked our syslog descriptor... */
-	openlog("pppoe-relay", LOG_PID, LOG_DAEMON);
-    }
-
-    /* Kick off SIGALRM if there is an idle timeout */
-    if (IdleTimeout) alarm(1);
-
-    /* Enter the relay loop */
-    relayLoop();
-
-    /* Shouldn't ever get here... */
-    return EXIT_FAILURE;
-}
-
-/**********************************************************************
-*%FUNCTION: addInterface
-*%ARGUMENTS:
-* ifname -- interface name
-* clientOK -- true if this interface should relay PADI, PADR packets.
-* acOK -- true if this interface should relay PADO, PADS packets.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Opens an interface; sets up discovery and session sockets.
-***********************************************************************/
-void
-addInterface(char const *ifname,
-	     int clientOK,
-	     int acOK)
-{
-    PPPoEInterface *i;
-    if (NumInterfaces >= MAX_INTERFACES) {
-	fprintf(stderr, "Too many interfaces (%d max)\n",
-		MAX_INTERFACES);
-	exit(EXIT_FAILURE);
-    }
-    i = &Interfaces[NumInterfaces++];
-    strncpy(i->name, ifname, IFNAMSIZ);
-    i->name[IFNAMSIZ] = 0;
-
-    i->discoverySock = openInterface(ifname, Eth_PPPOE_Discovery, i->mac);
-    i->sessionSock   = openInterface(ifname, Eth_PPPOE_Session,   NULL);
-    i->clientOK = clientOK;
-    i->acOK = acOK;
-}
-
-/**********************************************************************
-*%FUNCTION: initRelay
-*%ARGUMENTS:
-* nsess -- maximum allowable number of sessions
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Initializes relay hash table and session tables.
-***********************************************************************/
-void
-initRelay(int nsess)
-{
-    int i;
-    NumSessions = 0;
-    MaxSessions = nsess;
-
-    AllSessions = calloc(MaxSessions, sizeof(PPPoESession));
-    if (!AllSessions) {
-	rp_fatal("Unable to allocate memory for PPPoE session table");
-    }
-    AllHashes = calloc(MaxSessions*2, sizeof(SessionHash));
-    if (!AllHashes) {
-	rp_fatal("Unable to allocate memory for PPPoE hash table");
-    }
-
-    /* Initialize sessions in a linked list */
-    AllSessions[0].prev = NULL;
-    if (MaxSessions > 1) {
-	AllSessions[0].next = &AllSessions[1];
-    } else {
-	AllSessions[0].next = NULL;
-    }
-    for (i=1; i<MaxSessions-1; i++) {
-	AllSessions[i].prev = &AllSessions[i-1];
-	AllSessions[i].next = &AllSessions[i+1];
-    }
-    if (MaxSessions > 1) {
-	AllSessions[MaxSessions-1].prev = &AllSessions[MaxSessions-2];
-	AllSessions[MaxSessions-1].next = NULL;
-    }
-
-    FreeSessions = AllSessions;
-    ActiveSessions = NULL;
-
-    /* Initialize session numbers which we hand out */
-    for (i=0; i<MaxSessions; i++) {
-	AllSessions[i].sesNum = htons((UINT16_t) i+1);
-    }
-
-    /* Initialize hashes in a linked list */
-    AllHashes[0].prev = NULL;
-    AllHashes[0].next = &AllHashes[1];
-    for (i=1; i<2*MaxSessions-1; i++) {
-	AllHashes[i].prev = &AllHashes[i-1];
-	AllHashes[i].next = &AllHashes[i+1];
-    }
-    AllHashes[2*MaxSessions-1].prev = &AllHashes[2*MaxSessions-2];
-    AllHashes[2*MaxSessions-1].next = NULL;
-
-    FreeHashes = AllHashes;
-}
-
-/**********************************************************************
-*%FUNCTION: createSession
-*%ARGUMENTS:
-* ac -- Ethernet interface on access-concentrator side
-* cli -- Ethernet interface on client side
-* acMac -- Access concentrator's MAC address
-* cliMac -- Client's MAC address
-* acSess -- Access concentrator's session ID.
-*%RETURNS:
-* PPPoESession structure; NULL if one could not be allocated
-*%DESCRIPTION:
-* Initializes relay hash table and session tables.
-***********************************************************************/
-PPPoESession *
-createSession(PPPoEInterface const *ac,
-	      PPPoEInterface const *cli,
-	      unsigned char const *acMac,
-	      unsigned char const *cliMac,
-	      UINT16_t acSes)
-{
-    PPPoESession *sess;
-    SessionHash *acHash, *cliHash;
-
-    if (NumSessions >= MaxSessions) {
-	printErr("Maximum number of sessions reached -- cannot create new session");
-	return NULL;
-    }
-
-    /* Grab a free session */
-    sess = FreeSessions;
-    FreeSessions = sess->next;
-    NumSessions++;
-
-    /* Link it to the active list */
-    sess->next = ActiveSessions;
-    if (sess->next) {
-	sess->next->prev = sess;
-    }
-    ActiveSessions = sess;
-    sess->prev = NULL;
-
-    sess->epoch = Epoch;
-
-    /* Get two hash entries */
-    acHash = FreeHashes;
-    cliHash = acHash->next;
-    FreeHashes = cliHash->next;
-
-    acHash->peer = cliHash;
-    cliHash->peer = acHash;
-
-    sess->acHash = acHash;
-    sess->clientHash = cliHash;
-
-    acHash->interface = ac;
-    cliHash->interface = cli;
-
-    memcpy(acHash->peerMac, acMac, ETH_ALEN);
-    acHash->sesNum = acSes;
-    acHash->ses = sess;
-
-    memcpy(cliHash->peerMac, cliMac, ETH_ALEN);
-    cliHash->sesNum = sess->sesNum;
-    cliHash->ses = sess;
-
-    addHash(acHash);
-    addHash(cliHash);
-
-    /* Log */
-    syslog(LOG_INFO,
-	   "Opened session: server=%02x:%02x:%02x:%02x:%02x:%02x(%s:%d), client=%02x:%02x:%02x:%02x:%02x:%02x(%s:%d)",
-	   acHash->peerMac[0], acHash->peerMac[1],
-	   acHash->peerMac[2], acHash->peerMac[3],
-	   acHash->peerMac[4], acHash->peerMac[5],
-	   acHash->interface->name,
-	   ntohs(acHash->sesNum),
-	   cliHash->peerMac[0], cliHash->peerMac[1],
-	   cliHash->peerMac[2], cliHash->peerMac[3],
-	   cliHash->peerMac[4], cliHash->peerMac[5],
-	   cliHash->interface->name,
-	   ntohs(cliHash->sesNum));
-	   
-    return sess;
-}
-	    
-/**********************************************************************
-*%FUNCTION: freeSession
-*%ARGUMENTS:
-* ses -- session to free
-* msg -- extra message to log on syslog.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Frees data used by a PPPoE session -- adds hashes and session back
-* to the free list
-***********************************************************************/
-void
-freeSession(PPPoESession *ses, char const *msg)
-{
-    syslog(LOG_INFO,
-	   "Closed session: server=%02x:%02x:%02x:%02x:%02x:%02x(%s:%d), client=%02x:%02x:%02x:%02x:%02x:%02x(%s:%d): %s",
-	   ses->acHash->peerMac[0], ses->acHash->peerMac[1],
-	   ses->acHash->peerMac[2], ses->acHash->peerMac[3],
-	   ses->acHash->peerMac[4], ses->acHash->peerMac[5],
-	   ses->acHash->interface->name,
-	   ntohs(ses->acHash->sesNum),
-	   ses->clientHash->peerMac[0], ses->clientHash->peerMac[1],
-	   ses->clientHash->peerMac[2], ses->clientHash->peerMac[3],
-	   ses->clientHash->peerMac[4], ses->clientHash->peerMac[5],
-	   ses->clientHash->interface->name,
-	   ntohs(ses->clientHash->sesNum), msg);
-
-    /* Unlink from active sessions */
-    if (ses->prev) {
-	ses->prev->next = ses->next;
-    } else {
-	ActiveSessions = ses->next;
-    }
-    if (ses->next) {
-	ses->next->prev = ses->prev;
-    }
-       
-    /* Link onto free list -- this is a singly-linked list, so
-       we do not care about prev */
-    ses->next = FreeSessions;
-    FreeSessions = ses;
-
-    unhash(ses->acHash);
-    unhash(ses->clientHash);
-    NumSessions--;
-}
-
-/**********************************************************************
-*%FUNCTION: unhash
-*%ARGUMENTS:
-* sh -- session hash to free
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Frees a session hash -- takes it out of hash table and puts it on
-* free list.
-***********************************************************************/
-void
-unhash(SessionHash *sh)
-{
-    unsigned int b = hash(sh->peerMac, sh->sesNum) % HASHTAB_SIZE;
-    if (sh->prev) {
-	sh->prev->next = sh->next;
-    } else {
-	Buckets[b] = sh->next;
-    }
-
-    if (sh->next) {
-	sh->next->prev = sh->prev;
-    }
-
-    /* Add to free list (singly-linked) */
-    sh->next = FreeHashes;
-    FreeHashes = sh;
-}
-
-/**********************************************************************
-*%FUNCTION: addHash
-*%ARGUMENTS:
-* sh -- a session hash
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Adds a SessionHash to the hash table
-***********************************************************************/
-void
-addHash(SessionHash *sh)
-{
-    unsigned int b = hash(sh->peerMac, sh->sesNum) % HASHTAB_SIZE;
-    sh->next = Buckets[b];
-    sh->prev = NULL;
-    if (sh->next) {
-	sh->next->prev = sh;
-    }
-    Buckets[b] = sh;
-}
-
-/**********************************************************************
-*%FUNCTION: hash
-*%ARGUMENTS:
-* mac -- an Ethernet address
-* sesNum -- a session number
-*%RETURNS:
-* A hash value combining Ethernet address with session number.
-* Currently very simplistic; we may need to experiment with different
-* hash values.
-***********************************************************************/
-unsigned int
-hash(unsigned char const *mac, UINT16_t sesNum)
-{
-    unsigned int ans1 =
-	((unsigned int) mac[0]) |
-	(((unsigned int) mac[1]) << 8) |
-	(((unsigned int) mac[2]) << 16) |
-	(((unsigned int) mac[3]) << 24);
-    unsigned int ans2 = 
-	((unsigned int) sesNum) |
-	(((unsigned int) mac[4]) << 16) |
-	(((unsigned int) mac[5]) << 24);
-    return ans1 ^ ans2;
-}
-
-/**********************************************************************
-*%FUNCTION: findSession
-*%ARGUMENTS:
-* mac -- an Ethernet address
-* sesNum -- a session number
-*%RETURNS:
-* The session hash for peer address "mac", session number sesNum
-***********************************************************************/
-SessionHash *
-findSession(unsigned char const *mac, UINT16_t sesNum)
-{
-    unsigned int b = hash(mac, sesNum) % HASHTAB_SIZE;
-    SessionHash *sh = Buckets[b];
-    while(sh) {
-	if (!memcmp(mac, sh->peerMac, ETH_ALEN) && sesNum == sh->sesNum) {
-	    return sh;
-	}
-	sh = sh->next;
-    }
-    return NULL;
-}
-
-/**********************************************************************
-*%FUNCTION: fatalSys
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to stderr and syslog and exits.
-***********************************************************************/
-void
-fatalSys(char const *str)
-{
-    char buf[1024];
-    sprintf(buf, "%.256s: %.256s", str, strerror(errno));
-    printErr(buf);
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: sysErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to syslog.
-***********************************************************************/
-void
-sysErr(char const *str)
-{
-    char buf[1024];
-    sprintf(buf, "%.256s: %.256s", str, strerror(errno));
-    printErr(buf);
-}
-
-/**********************************************************************
-*%FUNCTION: rp_fatal
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog and exits.
-***********************************************************************/
-void
-rp_fatal(char const *str)
-{
-    printErr(str);
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: relayLoop
-*%ARGUMENTS:
-* None
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Runs the relay loop.  This function never returns
-***********************************************************************/
-void
-relayLoop()
-{
-    fd_set readable, readableCopy;
-    int maxFD;
-    int i, r;
-    int sock;
-    
-    /* Build the select set */
-    FD_ZERO(&readable);
-    maxFD = 0;
-    for (i=0; i<NumInterfaces; i++) {
-	sock = Interfaces[i].discoverySock;
-	if (sock > maxFD) maxFD = sock;
-	FD_SET(sock, &readable);
-	sock = Interfaces[i].sessionSock;
-	if (sock > maxFD) maxFD = sock;
-	FD_SET(sock, &readable);
-	if (CleanPipe[0] > maxFD) maxFD = CleanPipe[0];
-	FD_SET(CleanPipe[0], &readable);
-    }
-    maxFD++;
-    for(;;) {
-	readableCopy = readable;
-	for(;;) {
-	    r = select(maxFD, &readableCopy, NULL, NULL, NULL);
-	    if (r >= 0 || errno != EINTR) break;
-	}
-	if (r < 0) {
-	    sysErr("select (relayLoop)");
-	    continue;
-	}
-
-	/* Handle session packets first */
-	for (i=0; i<NumInterfaces; i++) {
-	    if (FD_ISSET(Interfaces[i].sessionSock, &readableCopy)) {
-		relayGotSessionPacket(&Interfaces[i]);
-	    }
-	}
-
-	/* Now handle discovery packets */
-	for (i=0; i<NumInterfaces; i++) {
-	    if (FD_ISSET(Interfaces[i].discoverySock, &readableCopy)) {
-		relayGotDiscoveryPacket(&Interfaces[i]);
-	    }
-	}
-
-	/* Handle the session-cleaning process */
-	if (FD_ISSET(CleanPipe[0], &readableCopy)) {
-	    char dummy;
-	    CleanCounter = 0;
-	    read(CleanPipe[0], &dummy, 1);
-	    if (IdleTimeout) cleanSessions();
-	}
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: relayGotDiscoveryPacket
-*%ARGUMENTS:
-* iface -- interface on which packet is waiting
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a discovery packet.
-***********************************************************************/
-void
-relayGotDiscoveryPacket(PPPoEInterface const *iface)
-{
-    PPPoEPacket packet;
-    int size;
-
-    if (receivePacket(iface->discoverySock, &packet, &size) < 0) {
-	return;
-    }
-    /* Ignore unknown code/version */
-    if (packet.ver != 1 || packet.type != 1) {
-	return;
-    }
-
-    /* Validate length */
-    if (ntohs(packet.length) + HDR_SIZE > size) {
-	syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-	       (unsigned int) ntohs(packet.length));
-	return;
-    }
-
-    /* Drop Ethernet frame padding */
-    if (size > ntohs(packet.length) + HDR_SIZE) {
-	size = ntohs(packet.length) + HDR_SIZE;
-    }
-
-    switch(packet.code) {
-    case CODE_PADT:
-	relayHandlePADT(iface, &packet, size);
-	break;
-    case CODE_PADI:
-	relayHandlePADI(iface, &packet, size);
-	break;
-    case CODE_PADO:
-	relayHandlePADO(iface, &packet, size);
-	break;
-    case CODE_PADR:
-	relayHandlePADR(iface, &packet, size);
-	break;
-    case CODE_PADS:
-	relayHandlePADS(iface, &packet, size);
-	break;
-    default:
-	syslog(LOG_ERR, "Discovery packet on %s with unknown code %d",
-	       iface->name, (int) packet.code);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: relayGotSessionPacket
-*%ARGUMENTS:
-* iface -- interface on which packet is waiting
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a session packet.
-***********************************************************************/
-void
-relayGotSessionPacket(PPPoEInterface const *iface)
-{
-    PPPoEPacket packet;
-    int size;
-    SessionHash *sh;
-    PPPoESession *ses;
-
-    if (receivePacket(iface->sessionSock, &packet, &size) < 0) {
-	return;
-    }
-
-    /* Ignore unknown code/version */
-    if (packet.ver != 1 || packet.type != 1) {
-	return;
-    }
-
-    /* Must be a session packet */
-    if (packet.code != CODE_SESS) {
-	syslog(LOG_ERR, "Session packet with code %d", (int) packet.code);
-	return;
-    }
-
-    /* Ignore session packets whose destination address isn't ours */
-    if (memcmp(packet.ethHdr.h_dest, iface->mac, ETH_ALEN)) {
-	return;
-    }
-
-    /* Validate length */
-    if (ntohs(packet.length) + HDR_SIZE > size) {
-	syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-	       (unsigned int) ntohs(packet.length));
-	return;
-    }
-
-    /* Drop Ethernet frame padding */
-    if (size > ntohs(packet.length) + HDR_SIZE) {
-	size = ntohs(packet.length) + HDR_SIZE;
-    }
-
-    /* We're in business!  Find the hash */
-    sh = findSession(packet.ethHdr.h_source, packet.session);
-    if (!sh) {
-	/* Don't log this.  Someone could be running the client and the
-	   relay on the same box. */
-	return;
-    }
-
-    /* Relay it */
-    ses = sh->ses;
-    ses->epoch = Epoch;
-    sh = sh->peer;
-    packet.session = sh->sesNum;
-    memcpy(packet.ethHdr.h_source, sh->interface->mac, ETH_ALEN);
-    memcpy(packet.ethHdr.h_dest, sh->peerMac, ETH_ALEN);
-#if 0
-    fprintf(stderr, "Relaying %02x:%02x:%02x:%02x:%02x:%02x(%s:%d) to %02x:%02x:%02x:%02x:%02x:%02x(%s:%d)\n",
-	    sh->peer->peerMac[0], sh->peer->peerMac[1], sh->peer->peerMac[2],
-	    sh->peer->peerMac[3], sh->peer->peerMac[4], sh->peer->peerMac[5],
-	    sh->peer->interface->name, ntohs(sh->peer->sesNum),
-	    sh->peerMac[0], sh->peerMac[1], sh->peerMac[2],
-	    sh->peerMac[3], sh->peerMac[4], sh->peerMac[5],
-	    sh->interface->name, ntohs(sh->sesNum));
-#endif
-    sendPacket(NULL, sh->interface->sessionSock, &packet, size);
-}
-
-/**********************************************************************
-*%FUNCTION: relayHandlePADT
-*%ARGUMENTS:
-* iface -- interface on which packet was received
-* packet -- the PADT packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a PADT packet.
-***********************************************************************/
-void
-relayHandlePADT(PPPoEInterface const *iface,
-		PPPoEPacket *packet,
-		int size)
-{
-    SessionHash *sh;
-    PPPoESession *ses;
-
-    sh = findSession(packet->ethHdr.h_source, packet->session);
-    if (!sh) {
-	return;
-    }
-    /* Relay the PADT to the peer */
-    sh = sh->peer;
-    ses = sh->ses;
-    packet->session = sh->sesNum;
-    memcpy(packet->ethHdr.h_source, sh->interface->mac, ETH_ALEN);
-    memcpy(packet->ethHdr.h_dest, sh->peerMac, ETH_ALEN);
-    sendPacket(NULL, sh->interface->sessionSock, packet, size);
-
-    /* Destroy the session */
-    freeSession(ses, "Received PADT");
-}
-
-/**********************************************************************
-*%FUNCTION: relayHandlePADI
-*%ARGUMENTS:
-* iface -- interface on which packet was received
-* packet -- the PADI packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a PADI packet.
-***********************************************************************/
-void
-relayHandlePADI(PPPoEInterface const *iface,
-		PPPoEPacket *packet,
-		int size)
-{
-    PPPoETag tag;
-    unsigned char *loc;
-    int i, r;
-
-    int ifIndex;
-
-    /* Can a client legally be behind this interface? */
-    if (!iface->clientOK) {
-	syslog(LOG_ERR,
-	       "PADI packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not permitted",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Source address must be unicast */
-    if (NOT_UNICAST(packet->ethHdr.h_source)) {
-	syslog(LOG_ERR,
-	       "PADI packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not from a unicast address",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Destination address must be broadcast */
-    if (NOT_BROADCAST(packet->ethHdr.h_dest)) {
-	syslog(LOG_ERR,
-	       "PADI packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not to a broadcast address",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-    
-    /* Get array index of interface */
-    ifIndex = iface - Interfaces;
-
-    loc = findTag(packet, TAG_RELAY_SESSION_ID, &tag);
-    if (!loc) {
-	tag.type = htons(TAG_RELAY_SESSION_ID);
-	tag.length = htons(MY_RELAY_TAG_LEN);
-	memcpy(tag.payload, &ifIndex, sizeof(ifIndex));
-	memcpy(tag.payload+sizeof(ifIndex), packet->ethHdr.h_source, ETH_ALEN);
-	/* Add a relay tag if there's room */
-	r = addTag(packet, &tag);
-	if (r < 0) return;
-	size += r;
-    } else {
-	/* We do not re-use relay-id tags.  Drop the frame.  The RFC says the
-	   relay agent SHOULD return a Generic-Error tag, but this does not
-	   make sense for PADI packets. */
-	return;
-    }
-
-    /* Broadcast the PADI on all AC-capable interfaces except the interface
-       on which it came */
-    for (i=0; i < NumInterfaces; i++) {
-	if (iface == &Interfaces[i]) continue;
-	if (!Interfaces[i].acOK) continue;
-	memcpy(packet->ethHdr.h_source, Interfaces[i].mac, ETH_ALEN);
-	sendPacket(NULL, Interfaces[i].discoverySock, packet, size);
-    }
-    
-}
-
-/**********************************************************************
-*%FUNCTION: relayHandlePADO
-*%ARGUMENTS:
-* iface -- interface on which packet was received
-* packet -- the PADO packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a PADO packet.
-***********************************************************************/
-void
-relayHandlePADO(PPPoEInterface const *iface,
-		PPPoEPacket *packet,
-		int size)
-{
-    PPPoETag tag;
-    unsigned char *loc;
-    int ifIndex;
-    int acIndex;
-
-    /* Can a server legally be behind this interface? */
-    if (!iface->acOK) {
-	syslog(LOG_ERR,
-	       "PADO packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not permitted",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    acIndex = iface - Interfaces;
-
-    /* Source address must be unicast */
-    if (NOT_UNICAST(packet->ethHdr.h_source)) {
-	syslog(LOG_ERR,
-	       "PADO packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not from a unicast address",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Destination address must be interface's MAC address */
-    if (memcmp(packet->ethHdr.h_dest, iface->mac, ETH_ALEN)) {
-	return;
-    }
-
-    /* Find relay tag */
-    loc = findTag(packet, TAG_RELAY_SESSION_ID, &tag);
-    if (!loc) {
-	syslog(LOG_ERR,
-	       "PADO packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* If it's the wrong length, ignore it */
-    if (ntohs(tag.length) != MY_RELAY_TAG_LEN) {
-	syslog(LOG_ERR,
-	       "PADO packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have correct length Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Extract interface index */
-    memcpy(&ifIndex, tag.payload, sizeof(ifIndex));
-
-    if (ifIndex < 0 || ifIndex >= NumInterfaces ||
-	!Interfaces[ifIndex].clientOK ||
-	iface == &Interfaces[ifIndex]) {
-	syslog(LOG_ERR,
-	       "PADO packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s has invalid interface in Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Replace Relay-ID tag with opposite-direction tag */
-    memcpy(loc+TAG_HDR_SIZE, &acIndex, sizeof(acIndex));
-    memcpy(loc+TAG_HDR_SIZE+sizeof(ifIndex), packet->ethHdr.h_source, ETH_ALEN);
-
-    /* Set destination address to MAC address in relay ID */
-    memcpy(packet->ethHdr.h_dest, tag.payload + sizeof(ifIndex), ETH_ALEN);
-
-    /* Set source address to MAC address of interface */
-    memcpy(packet->ethHdr.h_source, Interfaces[ifIndex].mac, ETH_ALEN);
-
-    /* Send the PADO to the proper client */
-    sendPacket(NULL, Interfaces[ifIndex].discoverySock, packet, size);
-}
-
-/**********************************************************************
-*%FUNCTION: relayHandlePADR
-*%ARGUMENTS:
-* iface -- interface on which packet was received
-* packet -- the PADR packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a PADR packet.
-***********************************************************************/
-void
-relayHandlePADR(PPPoEInterface const *iface,
-		PPPoEPacket *packet,
-		int size)
-{
-    PPPoETag tag;
-    unsigned char *loc;
-    int ifIndex;
-    int cliIndex;
-
-    /* Can a client legally be behind this interface? */
-    if (!iface->clientOK) {
-	syslog(LOG_ERR,
-	       "PADR packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not permitted",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    cliIndex = iface - Interfaces;
-
-    /* Source address must be unicast */
-    if (NOT_UNICAST(packet->ethHdr.h_source)) {
-	syslog(LOG_ERR,
-	       "PADR packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not from a unicast address",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Destination address must be interface's MAC address */
-    if (memcmp(packet->ethHdr.h_dest, iface->mac, ETH_ALEN)) {
-	return;
-    }
-
-    /* Find relay tag */
-    loc = findTag(packet, TAG_RELAY_SESSION_ID, &tag);
-    if (!loc) {
-	syslog(LOG_ERR,
-	       "PADR packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* If it's the wrong length, ignore it */
-    if (ntohs(tag.length) != MY_RELAY_TAG_LEN) {
-	syslog(LOG_ERR,
-	       "PADR packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have correct length Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Extract interface index */
-    memcpy(&ifIndex, tag.payload, sizeof(ifIndex));
-
-    if (ifIndex < 0 || ifIndex >= NumInterfaces ||
-	!Interfaces[ifIndex].acOK ||
-	iface == &Interfaces[ifIndex]) {
-	syslog(LOG_ERR,
-	       "PADR packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s has invalid interface in Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Replace Relay-ID tag with opposite-direction tag */
-    memcpy(loc+TAG_HDR_SIZE, &cliIndex, sizeof(cliIndex));
-    memcpy(loc+TAG_HDR_SIZE+sizeof(ifIndex), packet->ethHdr.h_source, ETH_ALEN);
-
-    /* Set destination address to MAC address in relay ID */
-    memcpy(packet->ethHdr.h_dest, tag.payload + sizeof(ifIndex), ETH_ALEN);
-
-    /* Set source address to MAC address of interface */
-    memcpy(packet->ethHdr.h_source, Interfaces[ifIndex].mac, ETH_ALEN);
-
-    /* Send the PADR to the proper access concentrator */
-    sendPacket(NULL, Interfaces[ifIndex].discoverySock, packet, size);
-}
-
-/**********************************************************************
-*%FUNCTION: relayHandlePADS
-*%ARGUMENTS:
-* iface -- interface on which packet was received
-* packet -- the PADS packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a PADS packet.
-***********************************************************************/
-void
-relayHandlePADS(PPPoEInterface const *iface,
-		PPPoEPacket *packet,
-		int size)
-{
-    PPPoETag tag;
-    unsigned char *loc;
-    int ifIndex;
-    int acIndex;
-    PPPoESession *ses = NULL;
-    SessionHash *sh;
-
-    /* Can a server legally be behind this interface? */
-    if (!iface->acOK) {
-	syslog(LOG_ERR,
-	       "PADS packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not permitted",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    acIndex = iface - Interfaces;
-
-    /* Source address must be unicast */
-    if (NOT_UNICAST(packet->ethHdr.h_source)) {
-	syslog(LOG_ERR,
-	       "PADS packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not from a unicast address",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Destination address must be interface's MAC address */
-    if (memcmp(packet->ethHdr.h_dest, iface->mac, ETH_ALEN)) {
-	return;
-    }
-
-    /* Find relay tag */
-    loc = findTag(packet, TAG_RELAY_SESSION_ID, &tag);
-    if (!loc) {
-	syslog(LOG_ERR,
-	       "PADS packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* If it's the wrong length, ignore it */
-    if (ntohs(tag.length) != MY_RELAY_TAG_LEN) {
-	syslog(LOG_ERR,
-	       "PADS packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have correct length Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Extract interface index */
-    memcpy(&ifIndex, tag.payload, sizeof(ifIndex));
-
-    if (ifIndex < 0 || ifIndex >= NumInterfaces ||
-	!Interfaces[ifIndex].clientOK ||
-	iface == &Interfaces[ifIndex]) {
-	syslog(LOG_ERR,
-	       "PADS packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s has invalid interface in Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* If session ID is zero, it's the AC respoding with an error.
-       Just relay it; do not create a session */
-    if (packet->session != htons(0)) {
-	/* Check for existing session */
-	sh = findSession(packet->ethHdr.h_source, packet->session);
-	if (sh) ses = sh->ses;
-
-	/* If already an existing session, assume it's a duplicate PADS.  Send
-	   the frame, but do not create a new session.  Is this the right
-	   thing to do?  Arguably, should send an error to the client and
-	   a PADT to the server, because this could happen due to a
-	   server crash and reboot. */
-
-	if (!ses) {
-	    /* Create a new session */
-	    ses = createSession(iface, &Interfaces[ifIndex],
-				packet->ethHdr.h_source,
-				loc + TAG_HDR_SIZE + sizeof(ifIndex), packet->session);
-	    if (!ses) {
-		/* Can't allocate session -- send error PADS to client and
-		   PADT to server */
-		PPPoETag hostUniq, *hu;
-		if (findTag(packet, TAG_HOST_UNIQ, &hostUniq)) {
-		    hu = &hostUniq;
-		} else {
-		    hu = NULL;
-		}
-		relaySendError(CODE_PADS, htons(0), &Interfaces[ifIndex],
-			       loc + TAG_HDR_SIZE + sizeof(ifIndex),
-			       hu, "RP-PPPoE: Relay: Unable to allocate session");
-		relaySendError(CODE_PADT, packet->session, iface,
-			       packet->ethHdr.h_source, NULL, 
-			       "RP-PPPoE: Relay: Unable to allocate session");
-		return;
-	    }
-	}
-	/* Replace session number */
-	packet->session = ses->sesNum;
-    }
-
-    /* Remove relay-ID tag */
-    removeBytes(packet, loc, MY_RELAY_TAG_LEN + TAG_HDR_SIZE);
-    size -= (MY_RELAY_TAG_LEN + TAG_HDR_SIZE);
-
-    /* Set destination address to MAC address in relay ID */
-    memcpy(packet->ethHdr.h_dest, tag.payload + sizeof(ifIndex), ETH_ALEN);
-
-    /* Set source address to MAC address of interface */
-    memcpy(packet->ethHdr.h_source, Interfaces[ifIndex].mac, ETH_ALEN);
-
-    /* Send the PADS to the proper client */
-    sendPacket(NULL, Interfaces[ifIndex].discoverySock, packet, size);
-}
-
-/**********************************************************************
-*%FUNCTION: relaySendError
-*%ARGUMENTS:
-* code -- PPPoE packet code (PADS or PADT, typically)
-* session -- PPPoE session number
-* iface -- interface on which to send frame
-* mac -- Ethernet address to which frame should be sent
-* hostUniq -- if non-NULL, a hostUniq tag to add to error frame
-* errMsg -- error message to insert into Generic-Error tag.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends either a PADS or PADT packet with a Generic-Error tag and an
-* error message.
-***********************************************************************/
-void
-relaySendError(unsigned char code,
-	       UINT16_t session,
-	       PPPoEInterface const *iface,
-	       unsigned char const *mac,
-	       PPPoETag const *hostUniq,
-	       char const *errMsg)
-{
-    PPPoEPacket packet;
-    PPPoETag errTag;
-    int size;
-
-    memcpy(packet.ethHdr.h_source, iface->mac, ETH_ALEN);
-    memcpy(packet.ethHdr.h_dest, mac, ETH_ALEN);
-    packet.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
-    packet.type = 1;
-    packet.ver = 1;
-    packet.code = code;
-    packet.session = session;
-    packet.length = htons(0);
-    if (hostUniq) {
-	if (addTag(&packet, hostUniq) < 0) return;
-    }
-    errTag.type = htons(TAG_GENERIC_ERROR);
-    errTag.length = htons(strlen(errMsg));
-    strcpy(errTag.payload, errMsg);
-    if (addTag(&packet, &errTag) < 0) return;
-    size = ntohs(packet.length) + HDR_SIZE;
-    if (code == CODE_PADT) {
-	sendPacket(NULL, iface->discoverySock, &packet, size);
-    } else {
-	sendPacket(NULL, iface->sessionSock, &packet, size);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: alarmHandler
-*%ARGUMENTS:
-* sig -- signal number
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* SIGALRM handler.  Increments Epoch; if necessary, writes a byte of
-* data to the alarm pipe to trigger the stale-session cleaner.
-***********************************************************************/
-void
-alarmHandler(int sig)
-{
-    alarm(1);
-    Epoch++;
-    CleanCounter++;
-    if (CleanCounter == CleanPeriod) {
-	write(CleanPipe[1], "", 1);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: cleanSessions
-*%ARGUMENTS:
-* None
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Goes through active sessions and cleans sessions idle for longer
-* than IdleTimeout seconds.
-***********************************************************************/
-void cleanSessions(void)
-{
-    PPPoESession *cur, *next;
-    cur = ActiveSessions;
-    while(cur) {
-	next = cur->next;
-	if (Epoch - cur->epoch > IdleTimeout) {
-	    /* Send PADT to each peer */
-	    relaySendError(CODE_PADT, cur->acHash->sesNum,
-			   cur->acHash->interface,
-			   cur->acHash->peerMac, NULL,
-			   "RP-PPPoE: Relay: Session exceeded idle timeout");
-	    relaySendError(CODE_PADT, cur->clientHash->sesNum,
-			   cur->clientHash->interface,
-			   cur->clientHash->peerMac, NULL,
-			   "RP-PPPoE: Relay: Session exceeded idle timeout");
-	    freeSession(cur, "Idle Timeout");
-	}
-	cur = next;
-    }
-}
diff --git a/mdk-stage1/rp-pppoe/src/relay.h b/mdk-stage1/rp-pppoe/src/relay.h
deleted file mode 100644
index d438a657f..000000000
--- a/mdk-stage1/rp-pppoe/src/relay.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/**********************************************************************
-*
-* relay.h
-*
-* Definitions for PPPoE relay
-*
-* Copyright (C) 2001 Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-* $Id$
-*
-***********************************************************************/
-
-#include "pppoe.h"
-
-/* Description for each active Ethernet interface */
-typedef struct InterfaceStruct {
-    char name[IFNAMSIZ+1];	/* Interface name */
-    int discoverySock;		/* Socket for discovery frames */
-    int sessionSock;		/* Socket for session frames */
-    int clientOK;		/* Client requests allowed (PADI, PADR) */
-    int acOK;			/* AC replies allowed (PADO, PADS) */
-    unsigned char mac[ETH_ALEN]; /* MAC address */
-} PPPoEInterface;
-
-/* Session state for relay */
-struct SessionHashStruct;
-typedef struct SessionStruct {
-    struct SessionStruct *next;	/* Free list link */
-    struct SessionStruct *prev;	/* Free list link */
-    struct SessionHashStruct *acHash; /* Hash bucket for AC MAC/Session */
-    struct SessionHashStruct *clientHash; /* Hash bucket for client MAC/Session */
-    unsigned int epoch;		/* Epoch when last activity was seen */
-    UINT16_t sesNum;		/* Session number assigned by relay */
-} PPPoESession;
-
-/* Hash table entry to find sessions */
-typedef struct SessionHashStruct {
-    struct SessionHashStruct *next; /* Link in hash chain */
-    struct SessionHashStruct *prev; /* Link in hash chain */
-    struct SessionHashStruct *peer; /* Peer for this session */
-    PPPoEInterface const *interface;	/* Interface */
-    unsigned char peerMac[ETH_ALEN]; /* Peer's MAC address */
-    UINT16_t sesNum;		/* Session number */
-    PPPoESession *ses;		/* Session data */
-} SessionHash;
-
-/* Function prototypes */
-
-void relayGotSessionPacket(PPPoEInterface const *i);
-void relayGotDiscoveryPacket(PPPoEInterface const *i);
-PPPoEInterface *findInterface(int sock);
-unsigned int hash(unsigned char const *mac, UINT16_t sesNum);
-SessionHash *findSession(unsigned char const *mac, UINT16_t sesNum);
-void deleteHash(SessionHash *hash);
-PPPoESession *createSession(PPPoEInterface const *ac,
-			    PPPoEInterface const *cli,
-			    unsigned char const *acMac,
-			    unsigned char const *cliMac,
-			    UINT16_t acSes);
-void freeSession(PPPoESession *ses, char const *msg);
-void addInterface(char const *ifname, int clientOK, int acOK);
-void usage(char const *progname);
-void initRelay(int nsess);
-void relayLoop(void);
-void addHash(SessionHash *sh);
-void unhash(SessionHash *sh);
-
-void relayHandlePADT(PPPoEInterface const *iface, PPPoEPacket *packet, int size);
-void relayHandlePADI(PPPoEInterface const *iface, PPPoEPacket *packet, int size);
-void relayHandlePADO(PPPoEInterface const *iface, PPPoEPacket *packet, int size);
-void relayHandlePADR(PPPoEInterface const *iface, PPPoEPacket *packet, int size);
-void relayHandlePADS(PPPoEInterface const *iface, PPPoEPacket *packet, int size);
-
-int addTag(PPPoEPacket *packet, PPPoETag const *tag);
-int insertBytes(PPPoEPacket *packet, unsigned char *loc,
-		void const *bytes, int length);
-int removeBytes(PPPoEPacket *packet, unsigned char *loc,
-		int length);
-void relaySendError(unsigned char code,
-		    UINT16_t session,
-		    PPPoEInterface const *iface,
-		    unsigned char const *mac,
-		    PPPoETag const *hostUniq,
-		    char const *errMsg);
-
-void alarmHandler(int sig);
-void cleanSessions(void);
-
-#define MAX_INTERFACES 8
-#define DEFAULT_SESSIONS 5000
-
-/* Hash table size -- a prime number; gives load factor of around 6
-   for 65534 sessions */
-#define HASHTAB_SIZE 18917
diff --git a/mdk-stage1/slang/Makefile b/mdk-stage1/slang/Makefile
deleted file mode 100644
index 4cd1dc6bb..000000000
--- a/mdk-stage1/slang/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-LIBNAME = libslang
-
-OBJS = sltermin.o sldisply.o slutty.o slang.o slarray.o slclass.o slcmd.o slerr.o slgetkey.o slkeymap.o slmalloc.o slmath.o slmemchr.o slmemcmp.o slmemcpy.o slmemset.o slmisc.o slparse.o slprepr.o slregexp.o slrline.o slsearch.o slsmg.o slstd.o sltoken.o sltypes.o slxstrng.o slcurses.o slscroll.o slsignal.o slkeypad.o slerrno.o slstring.o slstruct.o slcmplex.o slarrfun.o slimport.o slpath.o slarith.o slassoc.o slcompat.o slposdir.o slstdio.o slproc.o sltime.o slstrops.o slbstr.o slpack.o slintall.o slistruc.o slposio.o slnspace.o slarrmis.o slospath.o slscanf.o
-
-DEFS = -Dunix -DSLANG
-
-INCS = 
-
-
-TARGETS = $(LIBNAME).a
-
-ifeq (DIETLIBC, $(L))
-TARGETS += $(LIBNAME)-DIET.a
-endif
-
-all: $(TARGETS)
-
-clean:
-	rm -f *.o *.a
-
-OBJS-DIET = $(subst .o,-DIET.o,$(OBJS))
-
-$(LIBNAME).a: $(OBJS)
-	ar -cru $@ $^
-	ranlib $@
-
-$(LIBNAME)-DIET.a: $(OBJS-DIET)
-	ar -cru $@ $^
-	ranlib $@
-
-$(OBJS): %.o: %.c
-	gcc $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -c $< -o $@
-
-$(OBJS-DIET): %-DIET.o: %.c
-	gcc $(CFLAGS) $(DEFS) $(INCS) $(DIETLIBC_INCLUDES) -c $< -o $@
-
diff --git a/mdk-stage1/slang/_slang.h b/mdk-stage1/slang/_slang.h
deleted file mode 100644
index 02ee13505..000000000
--- a/mdk-stage1/slang/_slang.h
+++ /dev/null
@@ -1,743 +0,0 @@
-#ifndef _PRIVATE_SLANG_H_
-#define _PRIVATE_SLANG_H_
-/* header file for S-Lang internal structures that users do not (should not)
-   need.  Use slang.h for that purpose. */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* #include "config.h" */
-#include "jdmacros.h"
-#include "sllimits.h"
-
-#ifdef VMS
-# define SLANG_SYSTEM_NAME "_VMS"
-#else
-# if defined (IBMPC_SYSTEM)
-#  define SLANG_SYSTEM_NAME "_IBMPC"
-# else
-#  define SLANG_SYSTEM_NAME "_UNIX"
-# endif
-#endif  /* VMS */
-
-/* These quantities are main_types for byte-compiled code.  They are used
- * by the inner_interp routine.  The _BC_ means byte-code.
- */
-
-#define _SLANG_BC_LVARIABLE	SLANG_LVARIABLE   /* 0x01 */
-#define _SLANG_BC_GVARIABLE	SLANG_GVARIABLE   /* 0x02 */
-#define _SLANG_BC_IVARIABLE 	SLANG_IVARIABLE   /* 0x03 */
-#define _SLANG_BC_RVARIABLE	SLANG_RVARIABLE   /* 0x04 */
-#define _SLANG_BC_INTRINSIC 	SLANG_INTRINSIC   /* 0x05 */
-#define _SLANG_BC_FUNCTION  	SLANG_FUNCTION   /* 0x06 */
-#define _SLANG_BC_MATH_UNARY	SLANG_MATH_UNARY   /* 0x07 */
-#define _SLANG_BC_APP_UNARY	SLANG_APP_UNARY   /* 0x08 */
-#define _SLANG_BC_ICONST	SLANG_ICONSTANT   /* 0x09 */
-#define _SLANG_BC_DCONST	SLANG_DCONSTANT   /* 0x0A */
-#define _SLANG_BC_PVARIABLE	SLANG_PVARIABLE   /* 0x0B */
-#define _SLANG_BC_PFUNCTION	SLANG_PFUNCTION   /* 0x0C */
-
-#define _SLANG_BC_BINARY	0x10
-#define _SLANG_BC_LITERAL	0x11           /* constant objects */
-#define _SLANG_BC_LITERAL_INT	0x12
-#define _SLANG_BC_LITERAL_STR	0x13
-#define _SLANG_BC_BLOCK		0x14
-
-/* These 3 MUST be in this order too ! */
-#define _SLANG_BC_RETURN	0x15
-#define _SLANG_BC_BREAK		0x16
-#define _SLANG_BC_CONTINUE	0x17
-
-#define _SLANG_BC_EXCH		0x18
-#define _SLANG_BC_LABEL		0x19
-#define _SLANG_BC_LOBJPTR	0x1A
-#define _SLANG_BC_GOBJPTR	0x1B
-#define _SLANG_BC_X_ERROR	0x1C
-/* These must be in this order */
-#define _SLANG_BC_X_USER0	0x1D
-#define _SLANG_BC_X_USER1	0x1E
-#define _SLANG_BC_X_USER2	0x1F
-#define _SLANG_BC_X_USER3	0x20
-#define _SLANG_BC_X_USER4	0x21
-
-#define _SLANG_BC_CALL_DIRECT		0x24
-#define _SLANG_BC_CALL_DIRECT_FRAME	0x25
-#define _SLANG_BC_UNARY			0x26
-#define _SLANG_BC_UNARY_FUNC		0x27
-
-#define _SLANG_BC_DEREF_ASSIGN		0x30
-#define _SLANG_BC_SET_LOCAL_LVALUE	0x31
-#define _SLANG_BC_SET_GLOBAL_LVALUE	0x32
-#define _SLANG_BC_SET_INTRIN_LVALUE	0x33
-#define _SLANG_BC_SET_STRUCT_LVALUE	0x34
-#define _SLANG_BC_FIELD			0x35
-#define _SLANG_BC_SET_ARRAY_LVALUE	0x36
-
-#define _SLANG_BC_LINE_NUM		0x40
-
-#define _SLANG_BC_TMP			0x50
-#define _SLANG_BC_LVARIABLE_AGET	0x60
-#define _SLANG_BC_LVARIABLE_APUT	0x61
-#define _SLANG_BC_INTEGER_PLUS		0x62
-#define _SLANG_BC_INTEGER_MINUS		0x63
-#define _SLANG_BC_ARG_LVARIABLE		0x64
-#define _SLANG_BC_EARG_LVARIABLE	0x65
-
-#define _SLANG_BC_CALL_DIRECT_INTRINSIC	0x80
-#define _SLANG_BC_INTRINSIC_CALL_DIRECT	0x81
-#define _SLANG_BC_CALL_DIRECT_LSTR	0x82
-#define _SLANG_BC_CALL_DIRECT_SLFUN	0x83
-#define _SLANG_BC_CALL_DIRECT_INTRSTOP	0x84
-#define _SLANG_BC_INTRINSIC_STOP	0x85
-#define _SLANG_BC_CALL_DIRECT_EARG_LVAR	0x86
-#define _SLANG_BC_CALL_DIRECT_LINT	0x87
-#define _SLANG_BC_CALL_DIRECT_LVAR	0x88
-
-
-/* Byte-Code Sub Types (_BCST_) */
-
-/* These are sub_types of _SLANG_BC_BLOCK */
-#define _SLANG_BCST_ERROR_BLOCK	0x01
-#define _SLANG_BCST_EXIT_BLOCK	0x02
-#define _SLANG_BCST_USER_BLOCK0	0x03
-#define _SLANG_BCST_USER_BLOCK1	0x04
-#define _SLANG_BCST_USER_BLOCK2	0x05
-#define _SLANG_BCST_USER_BLOCK3	0x06
-#define _SLANG_BCST_USER_BLOCK4	0x07
-/* The user blocks MUST be in the above order */
-#define _SLANG_BCST_LOOP	0x10
-#define _SLANG_BCST_WHILE	0x11
-#define _SLANG_BCST_FOR		0x12
-#define _SLANG_BCST_FOREVER	0x13
-#define _SLANG_BCST_CFOR	0x14
-#define _SLANG_BCST_DOWHILE	0x15
-#define _SLANG_BCST_FOREACH	0x16
-
-#define _SLANG_BCST_IF		0x20
-#define _SLANG_BCST_IFNOT	0x21
-#define _SLANG_BCST_ELSE	0x22
-#define _SLANG_BCST_ANDELSE	0x23
-#define _SLANG_BCST_ORELSE	0x24
-#define _SLANG_BCST_SWITCH	0x25
-#define _SLANG_BCST_NOTELSE	0x26
-
-/* assignment (_SLANG_BC_SET_*_LVALUE) subtypes.  The order MUST correspond
- * to the assignment token order with the ASSIGN_TOKEN as the first!
- */
-#define _SLANG_BCST_ASSIGN		0x01
-#define _SLANG_BCST_PLUSEQS		0x02
-#define _SLANG_BCST_MINUSEQS		0x03
-#define _SLANG_BCST_TIMESEQS		0x04
-#define _SLANG_BCST_DIVEQS		0x05
-#define _SLANG_BCST_BOREQS		0x06
-#define _SLANG_BCST_BANDEQS		0x07
-#define _SLANG_BCST_PLUSPLUS		0x08
-#define _SLANG_BCST_POST_PLUSPLUS	0x09
-#define _SLANG_BCST_MINUSMINUS		0x0A
-#define _SLANG_BCST_POST_MINUSMINUS	0x0B
-
-/* These use SLANG_PLUS, SLANG_MINUS, SLANG_PLUSPLUS, etc... */
-
-typedef union
-{
-#if SLANG_HAS_FLOAT
-   double double_val;
-   float float_val;
-#endif
-   long long_val;
-   unsigned long ulong_val;
-   VOID_STAR ptr_val;
-   char *s_val;
-   int int_val;
-   unsigned int uint_val;
-   SLang_MMT_Type *ref;
-   SLang_Name_Type *n_val;
-   struct _SLang_Struct_Type *struct_val;
-   struct _SLang_Array_Type *array_val;
-   short short_val;
-   unsigned short ushort_val;
-   char char_val;
-   unsigned char uchar_val;
-}
-_SL_Object_Union_Type;
-
-typedef struct _SLang_Object_Type
-{
-   unsigned char data_type;	       /* SLANG_INT_TYPE, ... */
-   _SL_Object_Union_Type v;
-}
-SLang_Object_Type;
-
-struct _SLang_MMT_Type
-{
-   unsigned char data_type;	       /* int, string, etc... */
-   VOID_STAR user_data;	       /* address of user structure */
-   unsigned int count;		       /* number of references */
-};
-
-extern int _SLang_pop_object_of_type (unsigned char, SLang_Object_Type *, int);
-
-typedef struct
-{
-   char *name;			       /* slstring */
-   SLang_Object_Type obj;
-}
-_SLstruct_Field_Type;
-
-typedef struct _SLang_Struct_Type
-{
-   _SLstruct_Field_Type *fields;
-   unsigned int nfields;	       /* number used */
-   unsigned int num_refs;
-}
-_SLang_Struct_Type;
-
-extern void _SLstruct_delete_struct (_SLang_Struct_Type *);
-extern int _SLang_push_struct (_SLang_Struct_Type *);
-extern int _SLang_pop_struct (_SLang_Struct_Type **);
-extern int _SLstruct_init (void);
-/* extern int _SLstruct_get_field (char *); */
-extern int _SLstruct_define_struct (void);
-extern int _SLstruct_define_typedef (void);
-
-extern int _SLang_pop_datatype (unsigned char *);
-extern int _SLang_push_datatype (unsigned char);
-
-struct _SLang_Ref_Type
-{
-   int is_global;
-   union
-     {
-	SLang_Name_Type *nt;
-	SLang_Object_Type *local_obj;
-     }
-   v;
-};
-
-extern int _SLang_dereference_ref (SLang_Ref_Type *);
-extern int _SLang_deref_assign (SLang_Ref_Type *);
-extern int _SLang_push_ref (int, VOID_STAR);
-
-extern int _SL_increment_frame_pointer (void);
-extern int _SL_decrement_frame_pointer (void);
-
-extern int SLang_pop(SLang_Object_Type *);
-extern void SLang_free_object (SLang_Object_Type *);
-extern int _SLanytype_typecast (unsigned char, VOID_STAR, unsigned int,
-				unsigned char, VOID_STAR);
-extern void _SLstring_intrinsic (void);
-
-
-/* These functions are used to create slstrings of a fixed length.  Be
- * very careful how they are used.  In particular, if len bytes are allocated,
- * then the string must be len characters long, no more and no less.
- */
-extern char *_SLallocate_slstring (unsigned int);
-extern char *_SLcreate_via_alloced_slstring (char *, unsigned int);
-extern void _SLunallocate_slstring (char *, unsigned int);
-extern int _SLpush_alloced_slstring (char *, unsigned int);
-  
-typedef struct 
-{
-   char **buf;
-   unsigned int max_num;
-   unsigned int num;
-   unsigned int delta_num;
-}
-_SLString_List_Type;
-extern int _SLstring_list_append (_SLString_List_Type *, char *);
-extern int _SLstring_list_init (_SLString_List_Type *, unsigned int, unsigned int);
-extern void _SLstring_list_delete (_SLString_List_Type *);
-extern int _SLstring_list_push (_SLString_List_Type *);
-
-/* This function assumes that s is an slstring. */
-extern char *_SLstring_dup_slstring (char *);
-extern int _SLang_dup_and_push_slstring (char *);
-
-
-extern int _SLang_init_import (void);
-
-/* This function checks to see if the referenced object is initialized */
-extern int _SLang_is_ref_initialized (SLang_Ref_Type *);
-extern int _SLcheck_identifier_syntax (char *);
-extern int _SLang_uninitialize_ref (SLang_Ref_Type *);
-
-extern int _SLpush_slang_obj (SLang_Object_Type *);
-
-extern char *_SLexpand_escaped_char(char *, char *);
-extern void _SLexpand_escaped_string (char *, char *, char *);
-
-/* returns a pointer to an SLstring string-- use SLang_free_slstring */
-extern char *_SLstringize_object (SLang_Object_Type *);
-extern int _SLdump_objects (char *, SLang_Object_Type *, unsigned int, int);
-
-extern SLang_Object_Type *_SLRun_Stack;
-extern SLang_Object_Type *_SLStack_Pointer;
-
-struct _SLang_NameSpace_Type
-{
-   struct _SLang_NameSpace_Type *next;
-   char *name;			       /* this is the load_type name */
-   char *namespace_name;	       /* this name is assigned by implements */
-   unsigned int table_size;
-   SLang_Name_Type **table;
-};
-extern SLang_NameSpace_Type *_SLns_allocate_namespace (char *, unsigned int);
-extern SLang_NameSpace_Type *_SLns_find_namespace (char *);
-extern int _SLns_set_namespace_name (SLang_NameSpace_Type *, char *);
-extern SLang_Array_Type *_SLnspace_apropos (SLang_NameSpace_Type *, char *, unsigned int);
-extern void _SLang_use_namespace_intrinsic (char *name);
-extern char *_SLang_cur_namespace_intrinsic (void);
-extern SLang_Array_Type *_SLang_apropos (char *, char *, unsigned int);
-extern void _SLang_implements_intrinsic (char *);
-
-extern int _SLang_Trace;
-extern int _SLstack_depth(void);
-extern char *_SLang_Current_Function_Name;
-
-extern int _SLang_trace_fun(char *);
-extern int _SLang_Compile_Line_Num_Info;
-
-extern char *_SLstring_dup_hashed_string (char *, unsigned long);
-extern unsigned long _SLcompute_string_hash (char *);
-extern char *_SLstring_make_hashed_string (char *, unsigned int, unsigned long *);
-extern void _SLfree_hashed_string (char *, unsigned int, unsigned long);
-unsigned long _SLstring_hash (unsigned char *, unsigned char *);
-extern int _SLinit_slcomplex (void);
-
-extern int _SLang_init_slstrops (void);
-extern int _SLstrops_do_sprintf_n (int);
-extern int _SLang_sscanf (void);
-extern double _SLang_atof (char *);
-extern int _SLang_init_bstring (void);
-extern int _SLang_init_sltime (void);
-extern void _SLpack (void);
-extern void _SLunpack (char *, SLang_BString_Type *);
-extern void _SLpack_pad_format (char *);
-extern unsigned int _SLpack_compute_size (char *);
-extern int _SLusleep (unsigned long);
-
-/* frees upon error.  NULL __NOT__ ok. */
-extern int _SLang_push_slstring (char *);
-
-extern unsigned char _SLarith_promote_type (unsigned char);
-extern int _SLarith_get_precedence (unsigned char);
-extern int _SLarith_typecast (unsigned char, VOID_STAR, unsigned int,
-			      unsigned char, VOID_STAR);
-
-extern int SLang_push(SLang_Object_Type *);
-extern int SLadd_global_variable (char *);
-extern void _SLang_clear_error (void);
-
-extern int _SLdo_pop (void);
-extern unsigned int _SLsys_getkey (void);
-extern int _SLsys_input_pending (int);
-#ifdef IBMPC_SYSTEM
-extern unsigned int _SLpc_convert_scancode (unsigned int, unsigned int, int);
-#define _SLTT_KEY_SHIFT		1
-#define _SLTT_KEY_CTRL		2
-#define _SLTT_KEY_ALT		4
-#endif
-
-typedef struct _SLterminfo_Type SLterminfo_Type;
-extern SLterminfo_Type *_SLtt_tigetent (char *);
-extern char *_SLtt_tigetstr (SLterminfo_Type *, char *);
-extern int _SLtt_tigetnum (SLterminfo_Type *, char *);
-extern int _SLtt_tigetflag (SLterminfo_Type *, char *);
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-extern int _SLtt_get_bce_color_offset (void);
-#endif
-extern void (*_SLtt_color_changed_hook)(void);
-
-extern unsigned char SLang_Input_Buffer [SL_MAX_INPUT_BUFFER_LEN];
-
-extern int _SLregister_types (void);
-extern SLang_Class_Type *_SLclass_get_class (unsigned char);
-extern VOID_STAR _SLclass_get_ptr_to_value (SLang_Class_Type *, SLang_Object_Type *);
-extern void _SLclass_type_mismatch_error (unsigned char, unsigned char);
-extern int _SLclass_init (void);
-extern int _SLclass_copy_class (unsigned char, unsigned char);
-
-extern unsigned char _SLclass_Class_Type [256];
-
-extern int (*_SLclass_get_typecast (unsigned char, unsigned char, int))
-(unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR);
-
-extern int (*_SLclass_get_binary_fun (int, SLang_Class_Type *, SLang_Class_Type *, SLang_Class_Type **, int))
-(int,
- unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR);
-
-extern int (*_SLclass_get_unary_fun (int, SLang_Class_Type *, SLang_Class_Type **, int))
-(int, unsigned char, VOID_STAR, unsigned int, VOID_STAR);
-
-extern int _SLarith_register_types (void);
-extern unsigned char _SLarith_Arith_Types [];
-extern unsigned char _SLarith_Is_Arith_Type [256];
-extern int _SLarith_bin_op (SLang_Object_Type *, SLang_Object_Type *, int);
-
-extern int _SLarray_add_bin_op (unsigned char);
-
-extern int _SLang_call_funptr (SLang_Name_Type *);
-extern void _SLset_double_format (char *);
-extern SLang_Name_Type *_SLlocate_global_name (char *);
-extern SLang_Name_Type *_SLlocate_name (char *);
-
-extern char *_SLdefines[];
-
-#define SL_ERRNO_NOT_IMPLEMENTED	0x7FFF
-extern int _SLerrno_errno;
-extern int _SLerrno_init (void);
-
-extern int _SLstdio_fdopen (char *, int, char *);
-
-extern void _SLstruct_pop_args (int *);
-extern void _SLstruct_push_args (SLang_Array_Type *);
-
-extern int _SLarray_aput (void);
-extern int _SLarray_aget (void);
-extern int _SLarray_inline_implicit_array (void);
-extern int _SLarray_inline_array (void);
-extern int _SLarray_wildcard_array (void);
-
-extern int
-_SLarray_typecast (unsigned char, VOID_STAR, unsigned int,
-		   unsigned char, VOID_STAR, int);
-
-extern int _SLarray_aput_transfer_elem (SLang_Array_Type *, int *,
-					VOID_STAR, unsigned int, int);
-extern int _SLarray_aget_transfer_elem (SLang_Array_Type *, int *,
-					VOID_STAR, unsigned int, int);
-extern void _SLarray_free_array_elements (SLang_Class_Type *, VOID_STAR, unsigned int);
-
-extern SLang_Foreach_Context_Type *
-_SLarray_cl_foreach_open (unsigned char, unsigned int);
-extern void _SLarray_cl_foreach_close (unsigned char, SLang_Foreach_Context_Type *);
-extern int _SLarray_cl_foreach (unsigned char, SLang_Foreach_Context_Type *);
-
-extern int _SLarray_matrix_multiply (void);
-extern void (*_SLang_Matrix_Multiply)(void);
-
-extern int _SLarray_init_slarray (void);
-extern SLang_Array_Type *
-SLang_create_array1 (unsigned char, int, VOID_STAR, int *, unsigned int, int);
-
-extern int _SLcompile_push_context (SLang_Load_Type *);
-extern int _SLcompile_pop_context (void);
-extern int _SLang_Auto_Declare_Globals;
-
-typedef struct
-{
-   union
-     {
-	long long_val;
-	char *s_val;		       /* Used for IDENT_TOKEN, FLOAT, etc...  */
-	SLang_BString_Type *b_val;
-     } v;
-   int free_sval_flag;
-   unsigned int num_refs;
-   unsigned long hash;
-#if _SLANG_HAS_DEBUG_CODE
-   int line_number;
-#endif
-   unsigned char type;
-}
-_SLang_Token_Type;
-
-extern void _SLcompile (_SLang_Token_Type *);
-extern void (*_SLcompile_ptr)(_SLang_Token_Type *);
-
-/* *** TOKENS *** */
-
-/* Note that that tokens corresponding to ^J, ^M, and ^Z should not be used.
- * This is because a file that contains any of these characters will
- * have an OS dependent interpretation, e.g., ^Z is EOF on MSDOS.
- */
-
-/* Special tokens */
-#define EOF_TOKEN	0x01
-#define RPN_TOKEN	0x02
-#define NL_TOKEN	0x03
-#define NOP_TOKEN	0x05
-#define FARG_TOKEN	0x06
-#define TMP_TOKEN	0x07
-
-#define RESERVED1_TOKEN	0x0A	       /* \n */
-#define RESERVED2_TOKEN	0x0D	       /* \r */
-
-/* Literal tokens */
-#define CHAR_TOKEN	0x10
-#define UCHAR_TOKEN	0x11
-#define SHORT_TOKEN	0x12
-#define USHORT_TOKEN	0x13
-#define INT_TOKEN	0x14
-#define UINT_TOKEN	0x15
-#define LONG_TOKEN	0x16
-#define ULONG_TOKEN	0x17
-#define IS_INTEGER_TOKEN(x) ((x >= CHAR_TOKEN) && (x <= ULONG_TOKEN))
-#define FLOAT_TOKEN	0x18
-#define DOUBLE_TOKEN	0x19
-#define RESERVED3_TOKEN	0x1A	       /* ^Z */
-#define COMPLEX_TOKEN	0x1B
-#define STRING_TOKEN    0x1C
-#define BSTRING_TOKEN	0x1D
-#define _BSTRING_TOKEN	0x1E	       /* byte-compiled BSTRING */
-#define ESC_STRING_TOKEN	0x1F
-
-/* Tokens that can be LVALUES */
-#define IDENT_TOKEN	0x20
-#define ARRAY_TOKEN	0x21
-#define DOT_TOKEN	0x22
-#define IS_LVALUE_TOKEN (((t) <= DOT_TOKEN) && ((t) >= IDENT_TOKEN))
-
-/* do not use these values */
-#define RESERVED4_TOKEN	0x23	       /* # */
-#define RESERVED5_TOKEN 0x25	       /* % */
-
-/* Flags for struct fields */
-#define STATIC_TOKEN	0x26
-#define READONLY_TOKEN	0x27
-#define PRIVATE_TOKEN	0x28
-#define PUBLIC_TOKEN	0x29
-
-/* Punctuation tokens */
-#define OBRACKET_TOKEN	0x2a
-#define CBRACKET_TOKEN	0x2b
-#define OPAREN_TOKEN	0x2c
-#define CPAREN_TOKEN	0x2d
-#define OBRACE_TOKEN	0x2e
-#define CBRACE_TOKEN	0x2f
-
-#define COMMA_TOKEN	0x31
-#define SEMICOLON_TOKEN	0x32
-#define COLON_TOKEN	0x33
-#define NAMESPACE_TOKEN	0x34
-
-/* Operators */
-#define POW_TOKEN	0x38
-
-/* The order here must match the order in the Binop_Level table in slparse.c */
-#define FIRST_BINARY_OP	0x39
-#define ADD_TOKEN	0x39
-#define SUB_TOKEN	0x3a
-#define TIMES_TOKEN	0x3b
-#define DIV_TOKEN	0x3c
-#define LT_TOKEN	0x3d
-#define LE_TOKEN	0x3e
-#define GT_TOKEN	0x3f
-#define GE_TOKEN	0x40
-#define EQ_TOKEN	0x41
-#define NE_TOKEN	0x42
-#define AND_TOKEN	0x43
-#define OR_TOKEN	0x44
-#define MOD_TOKEN	0x45
-#define BAND_TOKEN	0x46
-#define SHL_TOKEN	0x47
-#define SHR_TOKEN	0x48
-#define BXOR_TOKEN	0x49
-#define BOR_TOKEN	0x4a
-#define POUND_TOKEN	0x4b	       /* matrix multiplication */
-
-#define LAST_BINARY_OP	 0x4b
-#define IS_BINARY_OP(t)	 ((t >= FIRST_BINARY_OP) && (t <= LAST_BINARY_OP))
-
-/* unary tokens -- but not all of them (see grammar) */
-#define DEREF_TOKEN	 0x4d
-#define NOT_TOKEN	 0x4e
-#define BNOT_TOKEN	 0x4f
-
-#define IS_INTERNAL_FUNC(t)	((t >= 0x50) && (t <= 0x56))
-#define POP_TOKEN	 0x50
-#define CHS_TOKEN	 0x51
-#define SIGN_TOKEN	 0x52
-#define ABS_TOKEN	 0x53
-#define SQR_TOKEN	 0x54
-#define MUL2_TOKEN	 0x55
-#define EXCH_TOKEN	 0x56
-
-/* Assignment tokens.  Note: these must appear with sequential values.
- * The order here must match the specific lvalue assignments below.
- * These tokens are used by rpn routines in slang.c.  slparse.c maps them
- * onto the specific lvalue tokens while parsing infix.
- * Also the assignment _SLANG_BCST_ assumes this order
- */
-#define ASSIGN_TOKEN		0x57
-#define PLUSEQS_TOKEN	 	0x58
-#define MINUSEQS_TOKEN		0x59
-#define TIMESEQS_TOKEN		0x5A
-#define DIVEQS_TOKEN		0x5B
-#define BOREQS_TOKEN		0x5C
-#define BANDEQS_TOKEN		0x5D
-#define PLUSPLUS_TOKEN		0x5E
-#define POST_PLUSPLUS_TOKEN	0x5F
-#define MINUSMINUS_TOKEN	0x60
-#define POST_MINUSMINUS_TOKEN	0x61
-
-/* Directives */
-#define FIRST_DIRECTIVE_TOKEN	0x62
-#define IFNOT_TOKEN	0x62
-#define IF_TOKEN	0x63
-#define ELSE_TOKEN	0x64
-#define FOREVER_TOKEN	0x65
-#define WHILE_TOKEN	0x66
-#define FOR_TOKEN	0x67
-#define _FOR_TOKEN	0x68
-#define LOOP_TOKEN	0x69
-#define SWITCH_TOKEN	0x6A
-#define DOWHILE_TOKEN	0x6B
-#define ANDELSE_TOKEN	0x6C
-#define ORELSE_TOKEN	0x6D
-#define ERRBLK_TOKEN	0x6E
-#define EXITBLK_TOKEN	0x6F
-/* These must be sequential */
-#define USRBLK0_TOKEN	0x70
-#define USRBLK1_TOKEN	0x71
-#define USRBLK2_TOKEN	0x72
-#define USRBLK3_TOKEN	0x73
-#define USRBLK4_TOKEN	0x74
-
-#define CONT_TOKEN	0x75
-#define BREAK_TOKEN	0x76
-#define RETURN_TOKEN	0x77
-
-#define CASE_TOKEN	0x78
-#define DEFINE_TOKEN	0x79
-#define DO_TOKEN	0x7a
-#define VARIABLE_TOKEN	0x7b
-#define GVARIABLE_TOKEN	0x7c
-#define _REF_TOKEN	0x7d
-#define PUSH_TOKEN	0x7e
-#define STRUCT_TOKEN	0x7f
-#define TYPEDEF_TOKEN	0x80
-#define NOTELSE_TOKEN	0x81
-#define DEFINE_STATIC_TOKEN	0x82
-#define FOREACH_TOKEN	0x83
-#define USING_TOKEN	0x84
-#define DEFINE_PRIVATE_TOKEN	0x85
-#define DEFINE_PUBLIC_TOKEN	0x86
-
-/* Note: the order here must match the order of the generic assignment tokens.
- * Also, the first token of each group must be the ?_ASSIGN_TOKEN.
- * slparse.c exploits this order, as well as slang.h.
- */
-#define FIRST_ASSIGN_TOKEN		0x90
-#define _STRUCT_ASSIGN_TOKEN		0x90
-#define _STRUCT_PLUSEQS_TOKEN		0x91
-#define _STRUCT_MINUSEQS_TOKEN		0x92
-#define _STRUCT_TIMESEQS_TOKEN		0x93
-#define _STRUCT_DIVEQS_TOKEN		0x94
-#define _STRUCT_BOREQS_TOKEN		0x95
-#define _STRUCT_BANDEQS_TOKEN		0x96
-#define _STRUCT_PLUSPLUS_TOKEN		0x97
-#define _STRUCT_POST_PLUSPLUS_TOKEN	0x98
-#define _STRUCT_MINUSMINUS_TOKEN	0x99
-#define _STRUCT_POST_MINUSMINUS_TOKEN	0x9A
-
-#define _ARRAY_ASSIGN_TOKEN		0xA0
-#define _ARRAY_PLUSEQS_TOKEN		0xA1
-#define _ARRAY_MINUSEQS_TOKEN		0xA2
-#define _ARRAY_TIMESEQS_TOKEN		0xA3
-#define _ARRAY_DIVEQS_TOKEN		0xA4
-#define _ARRAY_BOREQS_TOKEN		0xA5
-#define _ARRAY_BANDEQS_TOKEN		0xA6
-#define _ARRAY_PLUSPLUS_TOKEN		0xA7
-#define _ARRAY_POST_PLUSPLUS_TOKEN	0xA8
-#define _ARRAY_MINUSMINUS_TOKEN		0xA9
-#define _ARRAY_POST_MINUSMINUS_TOKEN	0xAA
-
-#define _SCALAR_ASSIGN_TOKEN		0xB0
-#define _SCALAR_PLUSEQS_TOKEN		0xB1
-#define _SCALAR_MINUSEQS_TOKEN		0xB2
-#define _SCALAR_TIMESEQS_TOKEN		0xB3
-#define _SCALAR_DIVEQS_TOKEN		0xB4
-#define _SCALAR_BOREQS_TOKEN		0xB5
-#define _SCALAR_BANDEQS_TOKEN		0xB6
-#define _SCALAR_PLUSPLUS_TOKEN		0xB7
-#define _SCALAR_POST_PLUSPLUS_TOKEN	0xB8
-#define _SCALAR_MINUSMINUS_TOKEN	0xB9
-#define _SCALAR_POST_MINUSMINUS_TOKEN	0xBA
-
-#define _DEREF_ASSIGN_TOKEN		0xC0
-#define _DEREF_PLUSEQS_TOKEN		0xC1
-#define _DEREF_MINUSEQS_TOKEN		0xC2
-#define _DEREF_TIMESEQS_TOKEN		0xC3
-#define _DEREF_DIVEQS_TOKEN		0xC4
-#define _DEREF_BOREQS_TOKEN		0xC5
-#define _DEREF_BANDEQS_TOKEN		0xC6
-#define _DEREF_PLUSPLUS_TOKEN		0xC7
-#define _DEREF_POST_PLUSPLUS_TOKEN	0xC8
-#define _DEREF_MINUSMINUS_TOKEN		0xC9
-#define _DEREF_POST_MINUSMINUS_TOKEN	0xCA
-
-#define LAST_ASSIGN_TOKEN		0xCA
-#define IS_ASSIGN_TOKEN(t) (((t)>=FIRST_ASSIGN_TOKEN)&&((t)<=LAST_ASSIGN_TOKEN))
-
-#define _INLINE_ARRAY_TOKEN		0xE0
-#define _INLINE_IMPLICIT_ARRAY_TOKEN	0xE1
-#define _NULL_TOKEN			0xE2
-#define _INLINE_WILDCARD_ARRAY_TOKEN	0xE3
-
-#define LINE_NUM_TOKEN			0xFC
-#define ARG_TOKEN	 		0xFD
-#define EARG_TOKEN	 		0xFE
-#define NO_OP_LITERAL			0xFF
-
-typedef struct
-{
-   /* sltoken.c */
-   /* SLang_eval_object */
-   SLang_Load_Type *llt;
-   SLPreprocess_Type *this_slpp;
-   /* prep_get_char() */
-   char *input_line;
-   char cchar;
-   /* get_token() */
-   int want_nl_token;
-
-   /* slparse.c */
-   _SLang_Token_Type ctok;
-   int block_depth;
-   int assignment_expression;
-
-   /* slang.c : SLcompile() */
-   _SLang_Token_Type save_token;
-   _SLang_Token_Type next_token;
-   void (*slcompile_ptr)(_SLang_Token_Type *);
-}
-_SLEval_Context;
-
-extern int _SLget_token (_SLang_Token_Type *);
-extern void _SLparse_error (char *, _SLang_Token_Type *, int);
-extern void _SLparse_start (SLang_Load_Type *);
-extern int _SLget_rpn_token (_SLang_Token_Type *);
-extern void _SLcompile_byte_compiled (void);
-
-extern int (*_SLprep_eval_hook) (char *);
-
-#ifdef HAVE_VSNPRINTF
-#define _SLvsnprintf vsnprintf
-#else
-extern int _SLvsnprintf (char *, unsigned int, char *, va_list);
-#endif
-
-#ifdef HAVE_SNPRINTF
-# define _SLsnprintf snprintf
-#else
-extern int _SLsnprintf (char *, unsigned int, char *, ...);
-#endif
-
-#undef _INLINE_
-#if defined(__GNUC__) && _SLANG_USE_INLINE_CODE
-# define _INLINE_ __inline__
-#else
-# define _INLINE_
-#endif
-
-
-#endif				       /* _PRIVATE_SLANG_H_ */
diff --git a/mdk-stage1/slang/config.h b/mdk-stage1/slang/config.h
deleted file mode 100644
index a5ab3273c..000000000
--- a/mdk-stage1/slang/config.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/* src/sysconf.h.  Generated automatically by configure.  */
-/* -*- c -*- */
-/* Note: this is for unix only. */
-
-#ifndef SL_CONFIG_H
-#define SL_CONFIG_H
-
-/* define if you have stdlib.h */
-#define HAVE_STDLIB_H 1
-
-/* define if you have unistd.h */
-#define HAVE_UNISTD_H 1
-
-/* define if you have termios.h */
-#define HAVE_TERMIOS_H 1
-
-/* define if you have memory.h */
-#define HAVE_MEMORY_H 1
-
-/* define if you have malloc.h */
-#define HAVE_MALLOC_H 1
-
-/* define if you have memset */
-#define HAVE_MEMSET 1
-
-/* define if you have memcpy */
-#define HAVE_MEMCPY 1
-
-//#define HAVE_SETLOCALE 1
-//#define HAVE_LOCALE_H 1
-
-#define HAVE_VFSCANF 1
-
-/* define if you have fcntl.h */
-#define HAVE_FCNTL_H 1
-
-/* Define if you have the vsnprintf, snprintf functions and they return
- * EOF upon failure.
- */
-#define HAVE_VSNPRINTF 1
-#define HAVE_SNPRINTF 1
-
-/* define if you have sys/fcntl.h */
-#define HAVE_SYS_FCNTL_H 1
-
-#define HAVE_SYS_TYPES_H 1
-#define HAVE_SYS_WAIT_H 1
-#define HAVE_SYS_TIMES_H 1
-
-/* Set these to the appropriate values */
-#define SIZEOF_SHORT 2
-#define SIZEOF_INT 4
-#define SIZEOF_LONG 4
-#define SIZEOF_FLOAT 4
-#define SIZEOF_DOUBLE 8
-
-/* define if you have these. */
-#define HAVE_ATEXIT 1
-#define HAVE_ON_EXIT 1
-#define HAVE_PUTENV 1
-#define HAVE_GETCWD 1
-#define HAVE_TCGETATTR 1
-#define HAVE_TCSETATTR 1
-#define HAVE_CFGETOSPEED 1
-#define HAVE_LSTAT 1
-#define HAVE_KILL 1
-#define HAVE_CHOWN 1
-#define HAVE_VSNPRINTF 1
-#define HAVE_POPEN 1
-#define HAVE_UMASK 1
-#define HAVE_READLINK 1
-#define HAVE_TIMES 1
-#define HAVE_GMTIME 1
-#define HAVE_MKFIFO 1
-
-#define HAVE_GETPPID 1
-#define HAVE_GETGID 1
-#define HAVE_GETEGID 1
-#define HAVE_GETEUID 1
-/* #undef HAVE_GETUID */
-
-#define HAVE_SETGID 1 
-#define HAVE_SETPGID 1
-#define HAVE_SETUID 1
-
-#define HAVE_ACOSH 1
-#define HAVE_ASINH 1
-#define HAVE_ATANH 1
-
-#define HAVE_DIRENT_H 1
-/* #undef HAVE_SYS_NDIR_H */
-/* #undef HAVE_SYS_DIR_H */
-/* #undef HAVE_NDIR_H */
-
-#define HAVE_DLFCN_H 1
-
-#define HAVE_SYS_UTSNAME_H 1
-#define HAVE_UNAME 1
-
-/* These two are needed on DOS-like systems.  Unix does not require them.
- * They are included here for consistency.
- *
-#define HAVE_IO_H
-#define HAVE_PROCESS_H
- */
-
-/* #undef USE_TERMCAP */
-
-/* #undef mode_t */
-/* #undef uid_t */
-/* #undef pid_t */
-/* #undef gid_t */
-
-/* Do we have posix signals? */
-#define HAVE_SIGACTION 1
-#define HAVE_SIGPROCMASK 1
-#define HAVE_SIGEMPTYSET 1
-#define HAVE_SIGADDSET 1
-
-#if defined(HAVE_SIGADDSET) && defined(HAVE_SIGEMPTYSET)
-# if defined(HAVE_SIGACTION) && defined(HAVE_SIGPROCMASK)
-#  define SLANG_POSIX_SIGNALS
-# endif
-#endif
-
-/* Define if you need to in order for stat and other things to work.  */
-/* #undef _POSIX_SOURCE */
-
-#ifdef _AIX
-# ifndef _POSIX_SOURCE
-#  define _POSIX_SOURCE 1
-# endif
-# ifndef _ALL_SOURCE
-#  define _ALL_SOURCE
-# endif
-/* This may generate warnings but the fact is that without it, xlc will 
- * INCORRECTLY inline many str* functions. */
-/* # undef __STR__ */
-#endif
-
-/* define USE_TERMCAP if you want to use it instead of terminfo. */
-#if defined(sequent) || defined(NeXT)
-# ifndef USE_TERMCAP
-#  define USE_TERMCAP
-# endif
-#endif
-
-#if defined(ultrix) && !defined(__GNUC__)
-# ifndef NO_PROTOTYPES
-#  define NO_PROTOTYPES
-# endif
-#endif
-
-#ifndef unix
-# define unix 1
-#endif
-
-#ifndef __unix__
-# define __unix__ 1
-#endif
-
-#define _SLANG_SOURCE_	1
-#endif /* SL_CONFIG_H */
diff --git a/mdk-stage1/slang/jdmacros.h b/mdk-stage1/slang/jdmacros.h
deleted file mode 100644
index 70d491b78..000000000
--- a/mdk-stage1/slang/jdmacros.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _JD_MACROS_H_
-#define _JD_MACROS_H_
-
-#ifndef SLMEMSET
-# ifdef HAVE_MEMSET
-#  define SLMEMSET memset
-# else
-#  define SLMEMSET SLmemset
-# endif
-#endif
-
-#ifndef SLMEMCHR
-# ifdef HAVE_MEMCHR
-#  define SLMEMCHR memchr
-# else
-#  define SLMEMCHR SLmemchr
-# endif
-#endif
-
-#ifndef SLMEMCPY
-# ifdef HAVE_MEMCPY
-#  define SLMEMCPY memcpy
-# else
-#  define SLMEMCPY SLmemcpy
-# endif
-#endif
-
-/* Note:  HAVE_MEMCMP requires an unsigned memory comparison!!!  */
-#ifndef SLMEMCMP
-# ifdef HAVE_MEMCMP
-#  define SLMEMCMP memcmp
-# else
-#  define SLMEMCMP SLmemcmp
-# endif
-#endif
-
-#ifndef SLFREE
-# define SLFREE free
-#endif
-
-#ifndef SLMALLOC
-# define SLMALLOC malloc
-#endif
-
-#ifndef SLCALLOC
-# define SLCALLOC calloc
-#endif
-
-#ifndef SLREALLOC
-# define SLREALLOC realloc
-#endif
-
-#endif				       /* _JD_MACROS_H_ */
diff --git a/mdk-stage1/slang/keywhash.c b/mdk-stage1/slang/keywhash.c
deleted file mode 100644
index 17d94d5a3..000000000
--- a/mdk-stage1/slang/keywhash.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/* Perfect hash generated by command line:
- * ./a.out 1
- */
-#define MIN_HASH_VALUE	2
-#define MAX_HASH_VALUE	118
-#define MIN_KEYWORD_LEN 2
-#define MAX_KEYWORD_LEN 11
-
-static unsigned char Keyword_Hash_Table [256] =
-{
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119,   1, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-    9,   7,   1,   8,   2, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119,   0,   0, 119,   0, 119, 119, 119,   7, 119,   0,   0, 119, 119,   0, 
-  119, 119,   0,   0,   0,   0, 119, 119,   0, 119, 119, 119, 119, 119, 119,   2, 
-  119,  41,   1,   1,   9,   0,  55,   8,   0,   0, 119,   0,  27,   0,   0,   0, 
-    7,   2,   0,  21,   0,   0,   0,   3,   2,   0, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119
-};
-
-static unsigned char keyword_hash (char *s, unsigned int len)
-{
-   unsigned int sum;
-
-   sum = len;
-   while (len)
-     {
-	len--;
-	sum += (unsigned int) Keyword_Hash_Table [(unsigned char)s[len]];
-     }
-   return sum;
-}
-
-typedef struct
-{
-   char *name;
-   unsigned int type;
-}
-Keyword_Table_Type;
-
-static Keyword_Table_Type Keyword_Table [/* 117 */] =
-{
-   {"or",	OR_TOKEN},
-   {"not",	NOT_TOKEN},
-   {NULL,0},
-   {"xor",	BXOR_TOKEN},
-   {"return",	RETURN_TOKEN},
-   {"exch",	EXCH_TOKEN},
-   {NULL,0},
-   {"continue",	CONT_TOKEN},
-   {NULL,0},
-   {"do",	DO_TOKEN},
-   {"mod",	MOD_TOKEN},
-   {"ERROR_BLOCK",	ERRBLK_TOKEN},
-   {"USER_BLOCK2",	USRBLK2_TOKEN},
-   {"USER_BLOCK4",	USRBLK4_TOKEN},
-   {"__tmp",	TMP_TOKEN},
-   {"pop",	POP_TOKEN},
-   {NULL,0},
-   {"EXIT_BLOCK",	EXITBLK_TOKEN},
-   {"USER_BLOCK1",	USRBLK1_TOKEN},
-   {"USER_BLOCK3",	USRBLK3_TOKEN},
-   {"USER_BLOCK0",	USRBLK0_TOKEN},
-   {NULL,0},
-   {"shr",	SHR_TOKEN},
-   {"chs",	CHS_TOKEN},
-   {"sqr",	SQR_TOKEN},
-   {NULL,0},
-   {"struct",	STRUCT_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {"switch",	SWITCH_TOKEN},
-   {"mul2",	MUL2_TOKEN},
-   {"sign",	SIGN_TOKEN},
-   {"using",	USING_TOKEN},
-   {"while",	WHILE_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {"loop",	LOOP_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {"public",	PUBLIC_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {"break",	BREAK_TOKEN},
-   {NULL,0},
-   {"do_while",	DOWHILE_TOKEN},
-   {NULL,0},
-   {"shl",	SHL_TOKEN},
-   {"else",	ELSE_TOKEN},
-   {"and",	AND_TOKEN},
-   {"orelse",	ORELSE_TOKEN},
-   {"private",	PRIVATE_TOKEN},
-   {NULL,0},
-   {"if",	IF_TOKEN},
-   {"for",	FOR_TOKEN},
-   {"!if",	IFNOT_TOKEN},
-   {NULL,0},
-   {"_for",	_FOR_TOKEN},
-   {"forever",	FOREVER_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {"abs",	ABS_TOKEN},
-   {"case",	CASE_TOKEN},
-   {NULL,0},
-   {"static",	STATIC_TOKEN},
-   {"define",	DEFINE_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {"typedef",	TYPEDEF_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {"foreach",	FOREACH_TOKEN},
-   {"andelse",	ANDELSE_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {"variable",	VARIABLE_TOKEN},
-};
-
-static Keyword_Table_Type *is_keyword (char *str, unsigned int len)
-{
-   unsigned int hash;
-   char *name;
-   Keyword_Table_Type *kw;
-
-   if ((len < MIN_KEYWORD_LEN)
-       || (len > MAX_KEYWORD_LEN))
-     return NULL;
-
-   hash = keyword_hash (str, len);
-   if ((hash > MAX_HASH_VALUE) || (hash < MIN_HASH_VALUE))
-     return NULL;
-
-   kw = &Keyword_Table[hash - MIN_HASH_VALUE];
-   if ((NULL != (name = kw->name))
-       && (*str == *name)
-       && (0 == strcmp (str, name)))
-     return kw;
-   return NULL;
-}
diff --git a/mdk-stage1/slang/sl-feat.h b/mdk-stage1/slang/sl-feat.h
deleted file mode 100644
index 511d72451..000000000
--- a/mdk-stage1/slang/sl-feat.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* Setting this to 1 enables automatic support for associative arrays.
- * If this is set to 0, an application must explicitly enable associative
- * array support via SLang_init_slassoc.
- */
-#define SLANG_HAS_ASSOC_ARRAYS		1
-
-#define SLANG_HAS_COMPLEX		1
-#define SLANG_HAS_FLOAT			1
-
-/* This is the old space-speed trade off.  To reduce memory usage and code
- * size, set this to zero.
- */
-#define _SLANG_OPTIMIZE_FOR_SPEED	2
-
-#define _SLANG_USE_INLINE_CODE		1
-
-/* This is experimental.  It adds extra information for tracking down
- * errors.
- */
-#define _SLANG_HAS_DEBUG_CODE		1
-
-/* Allow optimizations based upon the __tmp operator. */
-#define _SLANG_USE_TMP_OPTIMIZATION	1
-
-/* Setting this to one will map 8 bit vtxxx terminals to 7 bit.  Terminals
- * such as the vt320 can be set up to output the two-character escape sequence
- * encoded as 'ESC [' as single character.  Setting this variable to 1 will
- * insert code to map such characters to the 7 bit equivalent.
- * This affects just input characters in the range 128-160 on non PC
- * systems.
- */
-#if defined(VMS) || defined(AMIGA)
-# define _SLANG_MAP_VTXXX_8BIT	1
-#else
-# define _SLANG_MAP_VTXXX_8BIT	0
-#endif
-
-/* Add support for color terminals that cannot do background color erases
- * Such terminals are poorly designed and are slowly disappearing but they
- * are still quite common.  For example, screen is one of them!
- * 
- * This is experimental.  In particular, it is not known to work if 
- * KANJI suupport is enabled.
- */
-#if !defined(IBMPC_SYSTEM)
-# define SLTT_HAS_NON_BCE_SUPPORT	1
-#else
-# define SLTT_HAS_NON_BCE_SUPPORT	0
-#endif
-
-/* If you want slang to assume that an xterm always has the background color
- * erase feature, then set this to 1.  Otherwise, it will check the terminfo
- * database.  This may or may not be a good idea since most good color xterms
- * support bce but many terminfo systems do not support it.
- */
-#define SLTT_XTERM_ALWAYS_BCE		0
-  
-/* Set this to 1 to enable Kanji support.  See above comment. */
-#define SLANG_HAS_KANJI_SUPPORT		0
-
diff --git a/mdk-stage1/slang/slang.c b/mdk-stage1/slang/slang.c
deleted file mode 100644
index 6edc7df37..000000000
--- a/mdk-stage1/slang/slang.c
+++ /dev/null
@@ -1,5547 +0,0 @@
-/* -*- mode: C; mode: fold; -*- */
-/* slang.c  --- guts of S-Lang interpreter */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#if SLANG_HAS_FLOAT
-# include <math.h>
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-#define USE_COMBINED_BYTECODES	0
-
-struct _SLBlock_Type;
-
-typedef struct
-{
-   struct _SLBlock_Type *body;
-   unsigned int num_refs;
-}
-_SLBlock_Header_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-
-   union
-     {
-	_SLBlock_Header_Type *header;    /* body of function */
-	char *autoload_filename;
-     }
-   v;
-#if _SLANG_HAS_DEBUG_CODE
-   char *file;
-#endif
-#define SLANG_MAX_LOCAL_VARIABLES 254
-#define AUTOLOAD_NUM_LOCALS (SLANG_MAX_LOCAL_VARIABLES + 1)
-   unsigned char nlocals;	       /* number of local variables */
-   unsigned char nargs;		       /* number of arguments */
-}
-_SLang_Function_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-
-   SLang_Object_Type obj;
-}
-SLang_Global_Var_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-
-   int local_var_number;
-}
-SLang_Local_Var_Type;
-
-typedef struct _SLBlock_Type
-{
-   unsigned char bc_main_type;
-   unsigned char bc_sub_type;
-   union
-     {
-	struct _SLBlock_Type *blk;
-	int i_blk;
-
-	SLang_Name_Type *nt_blk;
-	SLang_App_Unary_Type *nt_unary_blk;
-	SLang_Intrin_Var_Type *nt_ivar_blk;
-	SLang_Intrin_Fun_Type *nt_ifun_blk;
-	SLang_Global_Var_Type *nt_gvar_blk;
-	SLang_IConstant_Type *iconst_blk;
-	SLang_DConstant_Type *dconst_blk;
-	_SLang_Function_Type *nt_fun_blk;
-
-	VOID_STAR ptr_blk;
-	char *s_blk;
-	SLang_BString_Type *bs_blk;
-
-#if SLANG_HAS_FLOAT
-	double *double_blk;		       /*literal double is a pointer */
-#endif
-	float float_blk;
-	long l_blk;
-	struct _SLang_Struct_Type *struct_blk;
-	int (*call_function)(void);
-     }
-   b;
-}
-SLBlock_Type;
-
-/* Debugging and tracing variables */
-
-void (*SLang_Enter_Function)(char *) = NULL;
-void (*SLang_Exit_Function)(char *) = NULL;
-/* If non null, these call C functions before and after a slang function. */
-
-int _SLang_Trace = 0;
-/* If _SLang_Trace = -1, do not trace intrinsics */
-static int Trace_Mode = 0;
-
-static char *Trace_Function;	       /* function to be traced */
-int SLang_Traceback = 0;
-/* non zero means do traceback.  If less than 0, do not show local variables */
-
-/* These variables handle _NARGS processing by the parser */
-int SLang_Num_Function_Args;
-static int *Num_Args_Stack;
-static unsigned int Recursion_Depth;
-static SLang_Object_Type *Frame_Pointer;
-static int Next_Function_Num_Args;
-static unsigned int Frame_Pointer_Depth;
-static unsigned int *Frame_Pointer_Stack;
-
-static int Lang_Break_Condition = 0;
-/* true if any one below is true.  This keeps us from testing 3 variables.
- * I know this can be perfomed with a bitmapped variable, but...
- */
-static int Lang_Break = 0;
-static int Lang_Return = 0;
-/* static int Lang_Continue = 0; */
-
-SLang_Object_Type *_SLRun_Stack;
-SLang_Object_Type *_SLStack_Pointer;
-static SLang_Object_Type *_SLStack_Pointer_Max;
-
-/* Might want to increase this. */
-static SLang_Object_Type Local_Variable_Stack[SLANG_MAX_LOCAL_STACK];
-static SLang_Object_Type *Local_Variable_Frame = Local_Variable_Stack;
-
-static void free_function_header (_SLBlock_Header_Type *);
-
-void (*SLang_Dump_Routine)(char *);
-
-static void call_dump_routine (char *fmt, ...)
-{
-   char buf[1024];
-   va_list ap;
-
-   va_start (ap, fmt);
-   if (SLang_Dump_Routine != NULL)
-     {
-	(void) _SLvsnprintf (buf, sizeof (buf), fmt, ap);
-	(*SLang_Dump_Routine) (buf);
-     }
-   else
-     {
-	vfprintf (stderr, fmt, ap);
-	fflush (stderr);
-     }
-   va_end (ap);
-}
-
-static void do_traceback (char *, unsigned int, char *);
-static int init_interpreter (void);
-
-/*{{{ push/pop/etc stack manipulation functions */
-
-/* This routine is assumed to work even in the presence of a SLang_Error. */
-_INLINE_
-int SLang_pop (SLang_Object_Type *x)
-{
-   register SLang_Object_Type *y;
-
-   y = _SLStack_Pointer;
-   if (y == _SLRun_Stack)
-     {
-	if (SLang_Error == 0) SLang_Error = SL_STACK_UNDERFLOW;
-	x->data_type = 0;
-	return -1;
-     }
-   y--;
-   *x = *y;
-
-   _SLStack_Pointer = y;
-   return 0;
-}
-
-static int pop_ctrl_integer (int *i)
-{
-   int type;
-   SLang_Class_Type *cl;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   register SLang_Object_Type *y;
-
-   /* Most of the time, either an integer or a char will be on the stack.
-    * Optimize these cases.
-    */
-   y = _SLStack_Pointer;
-   if (y == _SLRun_Stack)
-     {
-	if (SLang_Error == 0) SLang_Error = SL_STACK_UNDERFLOW;
-	return -1;
-     }
-   y--;
-   
-   type = y->data_type;
-   if (type == SLANG_INT_TYPE)
-     {
-	_SLStack_Pointer = y;   
-	*i = y->v.int_val;
-	return 0;
-     }
-   if (type == SLANG_CHAR_TYPE)
-     {
-	_SLStack_Pointer = y;   
-	*i = y->v.char_val;
-	return 0;
-     }
-#else
-   if (-1 == (type = SLang_peek_at_stack ()))
-     return -1;
-#endif
-
-   cl = _SLclass_get_class ((unsigned char) type);
-   if (cl->cl_to_bool == NULL)
-     {
-	SLang_verror (SL_TYPE_MISMATCH,
-		      "%s cannot be used in a boolean context",
-		      cl->cl_name);
-	return -1;
-     }
-   return cl->cl_to_bool ((unsigned char) type, i);
-}
-
-_INLINE_
-int SLang_peek_at_stack (void)
-{
-   if (_SLStack_Pointer == _SLRun_Stack)
-     {
-	if (SLang_Error == 0)
-	  SLang_Error = SL_STACK_UNDERFLOW;
-	return -1;
-     }
-
-   return (_SLStack_Pointer - 1)->data_type;
-}
-
-int SLang_peek_at_stack1 (void)
-{
-   int type;
-
-   type = SLang_peek_at_stack ();
-   if (type == SLANG_ARRAY_TYPE)
-     type = (_SLStack_Pointer - 1)->v.array_val->data_type;
-
-   return type;
-}
-
-_INLINE_
-void SLang_free_object (SLang_Object_Type *obj)
-{
-   unsigned char data_type;
-   SLang_Class_Type *cl;
-
-   if (obj == NULL) return;
-   data_type = obj->data_type;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type [data_type])
-     return;
-   if (data_type == SLANG_STRING_TYPE)
-     {
-	SLang_free_slstring (obj->v.s_val);
-	return;
-     }
-#endif
-   cl = _SLclass_get_class (data_type);
-#if !_SLANG_OPTIMIZE_FOR_SPEED
-   if (cl->cl_class_type != SLANG_CLASS_TYPE_SCALAR)
-#endif
-     (*cl->cl_destroy) (data_type, (VOID_STAR) &obj->v);
-}
-
-_INLINE_
-int SLang_push (SLang_Object_Type *x)
-{
-   register SLang_Object_Type *y;
-   y = _SLStack_Pointer;
-
-   /* if there is a SLang_Error, probably not much harm will be done
-    if it is ignored here */
-   /* if (SLang_Error) return; */
-
-   /* flag it now */
-   if (y >= _SLStack_Pointer_Max)
-     {
-	if (!SLang_Error) SLang_Error = SL_STACK_OVERFLOW;
-	return -1;
-     }
-
-   *y = *x;
-   _SLStack_Pointer = y + 1;
-   return 0;
-}
-
-/* _INLINE_ */
-int SLclass_push_ptr_obj (unsigned char type, VOID_STAR pval)
-{
-   register SLang_Object_Type *y;
-   y = _SLStack_Pointer;
-
-   if (y >= _SLStack_Pointer_Max)
-     {
-	if (!SLang_Error) SLang_Error = SL_STACK_OVERFLOW;
-	return -1;
-     }
-
-   y->data_type = type;
-   y->v.ptr_val = pval;
-
-   _SLStack_Pointer = y + 1;
-   return 0;
-}
-
-_INLINE_
-int SLclass_push_int_obj (unsigned char type, int x)
-{
-   register SLang_Object_Type *y;
-   y = _SLStack_Pointer;
-
-   if (y >= _SLStack_Pointer_Max)
-     {
-	if (!SLang_Error) SLang_Error = SL_STACK_OVERFLOW;
-	return -1;
-     }
-
-   y->data_type = type;
-   y->v.int_val = x;
-
-   _SLStack_Pointer = y + 1;
-   return 0;
-}
-
-_INLINE_
-int _SLang_pop_object_of_type (unsigned char type, SLang_Object_Type *obj,
-			       int allow_arrays)
-{
-   register SLang_Object_Type *y;
-
-   y = _SLStack_Pointer;
-   if (y == _SLRun_Stack)
-     return SLang_pop (obj);
-   y--;
-   if (y->data_type != type)
-     {
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	/* This is an implicit typecast.  We do not want to typecast
-	 * floats to ints implicitly.  
-	 */
-	if (_SLarith_Is_Arith_Type [type]
-	    && _SLarith_Is_Arith_Type [y->data_type]
-	    && (_SLarith_Is_Arith_Type [type] >= _SLarith_Is_Arith_Type[y->data_type]))
-	  {
-	     /* This should not fail */
-	     (void) _SLarith_typecast (y->data_type, (VOID_STAR)&y->v, 1, 
-				       type, (VOID_STAR)&obj->v);
-	     obj->data_type = type;
-	     _SLStack_Pointer = y;
-	     return 0;
-	  }
-#endif
-	
-	if ((allow_arrays == 0)
-	    || (y->data_type != SLANG_ARRAY_TYPE)
-	    || (y->v.array_val->data_type != type))
-	  if (-1 == SLclass_typecast (type, 1, 0))
-	    return -1;
-     }
-   *obj = *y;
-   _SLStack_Pointer = y;
-   return 0;
-}
-
-/*  This function reverses the top n items on the stack and returns a
- *  an offset from the start of the stack to the last item.
- */
-int SLreverse_stack (int n)
-{
-   SLang_Object_Type *otop, *obot, tmp;
-
-   otop = _SLStack_Pointer;
-   if ((n > otop - _SLRun_Stack) || (n < 0))
-     {
-	SLang_Error = SL_STACK_UNDERFLOW;
-	return -1;
-     }
-   obot = otop - n;
-   otop--;
-   while (otop > obot)
-     {
-	tmp = *obot;
-	*obot = *otop;
-	*otop = tmp;
-	otop--;
-	obot++;
-     }
-   return (int) ((_SLStack_Pointer - n) - _SLRun_Stack);
-}
-
-_INLINE_
-int SLroll_stack (int np)
-{
-   int n, i;
-   SLang_Object_Type *otop, *obot, tmp;
-
-   if ((n = abs(np)) <= 1) return 0;    /* identity */
-
-   obot = otop = _SLStack_Pointer;
-   i = n;
-   while (i != 0)
-     {
-	if (obot <= _SLRun_Stack)
-	  {
-	     SLang_Error = SL_STACK_UNDERFLOW;
-	     return -1;
-	  }
-	obot--;
-	i--;
-     }
-   otop--;
-
-   if (np > 0)
-     {
-	/* Put top on bottom and roll rest up. */
-	tmp = *otop;
-	while (otop > obot)
-	  {
-	     *otop = *(otop - 1);
-	     otop--;
-	  }
-	*otop = tmp;
-     }
-   else
-     {
-	/* Put bottom on top and roll rest down. */
-	tmp = *obot;
-	while (obot < otop)
-	  {
-	     *obot = *(obot + 1);
-	     obot++;
-	  }
-	*obot = tmp;
-     }
-   return 0;
-}
-
-int _SLstack_depth (void)
-{
-   return (int) (_SLStack_Pointer - _SLRun_Stack);
-}
-
-int SLdup_n (int n)
-{
-   SLang_Object_Type *bot, *top;
-
-   if (n <= 0)
-     return 0;
-   
-   top = _SLStack_Pointer;
-   if (top < _SLRun_Stack + n)
-     {
-	if (SLang_Error == 0)
-	  SLang_Error = SL_STACK_UNDERFLOW;
-	return -1;
-     }
-   if (top + n > _SLStack_Pointer_Max)
-     {
-	if (SLang_Error == 0)
-	  SLang_Error = SL_STACK_OVERFLOW;
-	return -1;
-     }
-   bot = top - n;
-
-   while (bot < top)
-     {
-	SLang_Class_Type *cl;
-	unsigned char data_type = bot->data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type [data_type])
-	  {
-	     *_SLStack_Pointer++ = *bot++;
-	     continue;
-	  }
-#endif
-	cl = _SLclass_get_class (data_type);
-	if (-1 == (*cl->cl_push) (data_type, (VOID_STAR) &bot->v))
-	  return -1;
-	bot++;
-     }
-   return 0;
-}
-
-/*}}}*/
-
-/*{{{ inner interpreter and support functions */
-
-_INLINE_
-int _SL_increment_frame_pointer (void)
-{
-   if (Recursion_Depth >= SLANG_MAX_RECURSIVE_DEPTH)
-     {
-	SLang_verror (SL_STACK_OVERFLOW, "Num Args Stack Overflow");
-	return -1;
-     }
-   Num_Args_Stack [Recursion_Depth] = SLang_Num_Function_Args;
-
-   SLang_Num_Function_Args = Next_Function_Num_Args;
-   Next_Function_Num_Args = 0;
-   Recursion_Depth++;
-   return 0;
-}
-
-_INLINE_
-int _SL_decrement_frame_pointer (void)
-{
-   if (Recursion_Depth == 0)
-     {
-	SLang_verror (SL_STACK_UNDERFLOW, "Num Args Stack Underflow");
-	return -1;
-     }
-
-   Recursion_Depth--;
-   if (Recursion_Depth < SLANG_MAX_RECURSIVE_DEPTH)
-     SLang_Num_Function_Args = Num_Args_Stack [Recursion_Depth];
-
-   return 0;
-}
-
-_INLINE_
-int SLang_start_arg_list (void)
-{
-   if (Frame_Pointer_Depth < SLANG_MAX_RECURSIVE_DEPTH)
-     {
-	Frame_Pointer_Stack [Frame_Pointer_Depth] = (unsigned int) (Frame_Pointer - _SLRun_Stack);
-	Frame_Pointer = _SLStack_Pointer;
-	Frame_Pointer_Depth++;
-	Next_Function_Num_Args = 0;
-	return 0;
-     }
-
-   SLang_verror (SL_STACK_OVERFLOW, "Frame Stack Overflow");
-   return -1;
-}
-
-_INLINE_
-int SLang_end_arg_list (void)
-{
-   if (Frame_Pointer_Depth == 0)
-     {
-	SLang_verror (SL_STACK_UNDERFLOW, "Frame Stack Underflow");
-	return -1;
-     }
-   Frame_Pointer_Depth--;
-   if (Frame_Pointer_Depth < SLANG_MAX_RECURSIVE_DEPTH)
-     {
-	Next_Function_Num_Args = (int) (_SLStack_Pointer - Frame_Pointer);
-	Frame_Pointer = _SLRun_Stack + Frame_Pointer_Stack [Frame_Pointer_Depth];
-     }
-   return 0;
-}
-
-_INLINE_
-static int do_bc_call_direct_frame (int (*f)(void))
-{
-   if ((0 == SLang_end_arg_list ())
-       && (0 == _SL_increment_frame_pointer ()))
-     {
-	(void) (*f) ();
-	_SL_decrement_frame_pointer ();
-     }
-   if (SLang_Error)
-     return -1;
-   return 0;
-}
-
-static int do_name_type_error (SLang_Name_Type *nt)
-{
-   char buf[256];
-   if (nt != NULL)
-     {
-	(void) _SLsnprintf (buf, sizeof (buf), "(Error occurred processing %s)", nt->name);
-	do_traceback (buf, 0, NULL);
-     }
-   return -1;
-}
-
-/* local and global variable assignments */
-
-static int do_binary_ab (int op, SLang_Object_Type *obja, SLang_Object_Type *objb)
-{
-   SLang_Class_Type *a_cl, *b_cl, *c_cl;
-   unsigned char b_data_type, a_data_type, c_data_type;
-   int (*binary_fun) (int,
-		      unsigned char, VOID_STAR, unsigned int,
-		      unsigned char, VOID_STAR, unsigned int,
-		      VOID_STAR);
-   VOID_STAR pa;
-   VOID_STAR pb;
-   VOID_STAR pc;
-   int ret;
-
-   b_data_type = objb->data_type;
-   a_data_type = obja->data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (_SLarith_Is_Arith_Type[a_data_type]
-       && _SLarith_Is_Arith_Type[b_data_type])
-     {
-	int status;
-	status = _SLarith_bin_op (obja, objb, op);
-	if (status != 1)
-	  return status;
-	/* drop and try it the hard way */
-     }
-#endif
-
-   a_cl = _SLclass_get_class (a_data_type);
-   if (a_data_type == b_data_type)
-     b_cl = a_cl;
-   else
-     b_cl = _SLclass_get_class (b_data_type);
-
-   if (NULL == (binary_fun = _SLclass_get_binary_fun (op, a_cl, b_cl, &c_cl, 1)))
-     return -1;
-
-   c_data_type = c_cl->cl_data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type [a_data_type])
-     pa = (VOID_STAR) &obja->v;
-   else
-#endif
-     pa = _SLclass_get_ptr_to_value (a_cl, obja);
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type [b_data_type])
-     pb = (VOID_STAR) &objb->v;
-   else
-#endif
-     pb = _SLclass_get_ptr_to_value (b_cl, objb);
-
-   pc = c_cl->cl_transfer_buf;
-
-   if (1 != (*binary_fun) (op,
-			   a_data_type, pa, 1,
-			   b_data_type, pb, 1,
-			   pc))
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "Binary operation between %s and %s failed",
-		      a_cl->cl_name, b_cl->cl_name);
-
-	return -1;
-     }
-
-   /* apush will create a copy, so make sure we free after the push */
-   ret = (*c_cl->cl_apush)(c_data_type, pc);
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [c_data_type])
-#endif
-     (*c_cl->cl_adestroy)(c_data_type, pc);
-
-   return ret;
-}
-
-_INLINE_
-static void do_binary (int op)
-{
-   SLang_Object_Type obja, objb;
-
-   if (SLang_pop (&objb)) return;
-   if (0 == SLang_pop (&obja))
-     {
-	(void) do_binary_ab (op, &obja, &objb);
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [obja.data_type])
-#endif
-	  SLang_free_object (&obja);
-     }
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [objb.data_type])
-#endif
-     SLang_free_object (&objb);
-}
-
-static int do_unary_op (int op, SLang_Object_Type *obj, int unary_type)
-{
-   int (*f) (int, unsigned char, VOID_STAR, unsigned int, VOID_STAR);
-   VOID_STAR pa;
-   VOID_STAR pb;
-   SLang_Class_Type *a_cl, *b_cl;
-   unsigned char a_type, b_type;
-   int ret;
-
-   a_type = obj->data_type;
-   a_cl = _SLclass_get_class (a_type);
-
-   if (NULL == (f = _SLclass_get_unary_fun (op, a_cl, &b_cl, unary_type)))
-     return -1;
-
-   b_type = b_cl->cl_data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type [a_type])
-     pa = (VOID_STAR) &obj->v;
-   else
-#endif
-     pa = _SLclass_get_ptr_to_value (a_cl, obj);
-
-   pb = b_cl->cl_transfer_buf;
-
-   if (1 != (*f) (op, a_type, pa, 1, pb))
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "Unary operation for %s failed", a_cl->cl_name);
-	return -1;
-     }
-
-   ret = (*b_cl->cl_apush)(b_type, pb);
-   /* cl_apush creates a copy, so make sure we call cl_adestroy */
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [b_type])
-#endif
-     (*b_cl->cl_adestroy)(b_type, pb);
-
-   return ret;
-}
-
-_INLINE_
-static int do_unary (int op, int unary_type)
-{
-   SLang_Object_Type obj;
-   int ret;
-
-   if (-1 == SLang_pop (&obj)) return -1;
-   ret = do_unary_op (op, &obj, unary_type);
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [obj.data_type])
-#endif
-     SLang_free_object (&obj);
-   return ret;
-}
-
-static int do_assignment_binary (int op, SLang_Object_Type *obja_ptr)
-{
-   SLang_Object_Type objb;
-   int ret;
-
-   if (SLang_pop (&objb))
-     return -1;
-
-   ret = do_binary_ab (op, obja_ptr, &objb);
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [objb.data_type])
-#endif
-     SLang_free_object (&objb);
-   return ret;
-}
-
-/* The order of these is assumed to match the binary operators
- * defined in slang.h
- */
-static int
-map_assignment_op_to_binary (unsigned char op_type, int *op, int *is_unary)
-{
-   *is_unary = 0;
-   switch (op_type)
-     {
-      case _SLANG_BCST_PLUSEQS:
-      case _SLANG_BCST_MINUSEQS:
-      case _SLANG_BCST_TIMESEQS:
-      case _SLANG_BCST_DIVEQS:
-	*op = SLANG_PLUS + (op_type - _SLANG_BCST_PLUSEQS);
-	break;
-
-      case _SLANG_BCST_BOREQS:
-	*op = SLANG_BOR;
-	break;
-
-      case _SLANG_BCST_BANDEQS:
-	*op = SLANG_BAND;
-	break;
-
-      case _SLANG_BCST_POST_MINUSMINUS:
-      case _SLANG_BCST_MINUSMINUS:
-	*op = SLANG_MINUS;
-	*is_unary = 1;
-	break;
-
-      case _SLANG_BCST_PLUSPLUS:
-      case _SLANG_BCST_POST_PLUSPLUS:
-	*op = SLANG_PLUS;
-	*is_unary = 1;
-	break;
-
-      default:
-	SLang_verror (SL_NOT_IMPLEMENTED, "Assignment operator not implemented");
-	return -1;
-     }
-   return 0;
-}
-
-static int
-perform_lvalue_operation (unsigned char op_type, SLang_Object_Type *obja_ptr)
-{
-   switch (op_type)
-     {
-      case _SLANG_BCST_ASSIGN:
-	break;
-
-	/* The order of these is assumed to match the binary operators
-	 * defined in slang.h
-	 */
-      case _SLANG_BCST_PLUSEQS:
-      case _SLANG_BCST_MINUSEQS:
-      case _SLANG_BCST_TIMESEQS:
-      case _SLANG_BCST_DIVEQS:
-	if (-1 == do_assignment_binary (SLANG_PLUS + (op_type - _SLANG_BCST_PLUSEQS), obja_ptr))
-	  return -1;
-	break;
-
-      case _SLANG_BCST_BOREQS:
-	if (-1 == do_assignment_binary (SLANG_BOR, obja_ptr))
-	  return -1;
-	break;
-
-      case _SLANG_BCST_BANDEQS:
-	if (-1 == do_assignment_binary (SLANG_BAND, obja_ptr))
-	  return -1;
-	break;
-
-      case _SLANG_BCST_PLUSPLUS:
-      case _SLANG_BCST_POST_PLUSPLUS:
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	if (obja_ptr->data_type == SLANG_INT_TYPE)
-	  return SLclass_push_int_obj (SLANG_INT_TYPE, obja_ptr->v.int_val + 1);
-#endif
-	if (-1 == do_unary_op (SLANG_PLUSPLUS, obja_ptr, _SLANG_BC_UNARY))
-	  return -1;
-	break;
-
-      case _SLANG_BCST_MINUSMINUS:
-      case _SLANG_BCST_POST_MINUSMINUS:
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	if (obja_ptr->data_type == SLANG_INT_TYPE)
-	  return SLclass_push_int_obj (SLANG_INT_TYPE, obja_ptr->v.int_val - 1);
-#endif
-	if (-1 == do_unary_op (SLANG_MINUSMINUS, obja_ptr, _SLANG_BC_UNARY))
-	  return -1;
-	break;
-
-      default:
-	SLang_Error = SL_INTERNAL_ERROR;
-	return -1;
-     }
-   return 0;
-}
-
-_INLINE_
-static int
-set_lvalue_obj (unsigned char op_type, SLang_Object_Type *obja_ptr)
-{
-   if (op_type != _SLANG_BCST_ASSIGN)
-     {
-	if (-1 == perform_lvalue_operation (op_type, obja_ptr))
-	  return -1;
-     }
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [obja_ptr->data_type])
-#endif
-     SLang_free_object (obja_ptr);
-
-   return SLang_pop(obja_ptr);
-}
-
-static int
-set_struct_lvalue (SLBlock_Type *bc_blk)
-{
-   int type;
-   SLang_Class_Type *cl;
-   char *name;
-   int op;
-
-   if (-1 == (type = SLang_peek_at_stack ()))
-     return -1;
-
-   cl = _SLclass_get_class (type);
-   if ((cl->cl_sput == NULL)
-       || (cl->cl_sget == NULL))
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "%s does not support structure access",
-		      cl->cl_name);
-	SLdo_pop_n (2);		       /* object plus what was to be assigned */
-	return -1;
-     }
-   name = bc_blk->b.s_blk;
-   op = bc_blk->bc_sub_type;
-
-   if (op != _SLANG_BCST_ASSIGN)
-     {
-	/* We have something like (A.x += b) or (A.x++).  In either case,
-	 * we need A.x.
-	 */
-	SLang_Object_Type obj_A;
-	SLang_Object_Type obj;
-
-	if (-1 == SLang_pop (&obj_A))
-	  return -1;
-
-	if ((-1 == _SLpush_slang_obj (&obj_A))
-	    || (-1 == cl->cl_sget ((unsigned char) type, name))
-	    || (-1 == SLang_pop (&obj)))
-	  {
-	     SLang_free_object (&obj_A);
-	     return -1;
-	  }
-	/* Now the value of A.x is in obj. */
-	if (-1 == perform_lvalue_operation (op, &obj))
-	  {
-	     SLang_free_object (&obj);
-	     SLang_free_object (&obj_A);
-	     return -1;
-	  }
-	SLang_free_object (&obj);
-	/* The result of the operation is now on the stack.
-	 * Perform assignment */
-	if (-1 == SLang_push (&obj_A))
-	  {
-	     SLang_free_object (&obj_A);
-	     return -1;
-	  }
-     }
-
-   return (*cl->cl_sput) ((unsigned char) type, name);
-}
-
-static int make_unit_object (SLang_Object_Type *a, SLang_Object_Type *u)
-{
-   unsigned char type;
-   
-   type = a->data_type;
-   if (type == SLANG_ARRAY_TYPE)
-     type = a->v.array_val->data_type;
-   
-   u->data_type = type;
-   switch (type)
-     {
-      case SLANG_UCHAR_TYPE:
-      case SLANG_CHAR_TYPE:
-	u->v.char_val = 1;
-	break;
-
-      case SLANG_SHORT_TYPE:
-      case SLANG_USHORT_TYPE:
-	u->v.short_val = 1;
-	break;
-
-      case SLANG_LONG_TYPE:
-      case SLANG_ULONG_TYPE:
-	u->v.long_val = 1;
-	break;
-
-#if SLANG_HAS_FLOAT
-      case SLANG_FLOAT_TYPE:
-	u->v.float_val = 1;
-	break;
-	
-      case SLANG_COMPLEX_TYPE:
-	u->data_type = SLANG_DOUBLE_TYPE;
-      case SLANG_DOUBLE_TYPE:
-	u->v.double_val = 1;
-	break;
-#endif
-      default:
-	u->data_type = SLANG_INT_TYPE;
-	u->v.int_val = 1;
-     }
-   return 0;
-}
-
-
-/* We want to convert 'A[i] op X' to 'A[i] = A[i] op X'.  The code that
- * has been generated is:  X __args i A __aput-op
- * where __aput-op represents this function.  We need to generate:
- * __args i A __eargs __aget X op __args i A __eargs __aput
- * Here, __eargs implies a call to do_bc_call_direct_frame with either
- * the aput or aget function.  In addition, __args represents a call to 
- * SLang_start_arg_list.  Of course, i represents a set of indices.
- * 
- * Note: If op is an unary operation (e.g., ++ or --), then X will not
- * b present an will have to be taken to be 1.
- * 
- * Implementation note: For efficiency, calls to setup the frame, start
- * arg list will be omitted and SLang_Num_Function_Args will be set.
- * This is ugly but the alternative is much less efficient rendering these
- * assignment operators useless.  So, the plan is to roll the stack to get X,
- * then duplicate the next N values, call __aget followed by op X, finally
- * calling __aput.  Hence, the sequence is:
- * 
- *     start:   X i .. j A 
- *      dupN:   X i .. j A i .. j A
- *    __aget:   X i .. j A Y
- *      roll:   i .. j A Y X
- *        op:   i .. j A Z
- *      roll:   Z i .. j A
- *    __aput:
- */
-static int
-set_array_lvalue (int op)
-{
-   SLang_Object_Type x, y;
-   int num_args, is_unary;
-
-   if (-1 == map_assignment_op_to_binary (op, &op, &is_unary))
-     return -1;
-
-   /* Grab the indices and the array.  Do not start a new frame. */
-   if (-1 == SLang_end_arg_list ())
-     return -1;
-   num_args = Next_Function_Num_Args;
-   Next_Function_Num_Args = 0;
-
-   if (-1 == SLdup_n (num_args))
-     return -1;
-
-   SLang_Num_Function_Args = num_args;
-   if (-1 == _SLarray_aget ())
-     return -1;
-
-   if (-1 == SLang_pop (&y))
-     return -1;
-   
-   if (is_unary == 0)
-     {
-	if ((-1 == SLroll_stack (-(num_args + 1)))
-	    || (-1 == SLang_pop (&x)))
-	  {
-	     SLang_free_object (&y);
-	     return -1;
-	  }
-     }
-   else if (-1 == make_unit_object (&y, &x))
-     {
-	SLang_free_object (&y);
-	return -1;
-     }
-   
-   if (-1 == do_binary_ab (op, &y, &x))
-     {
-	SLang_free_object (&y);
-	SLang_free_object (&x);
-	return -1;
-     }
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [y.data_type])
-#endif
-     SLang_free_object (&y);
-   
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [x.data_type])
-#endif
-     SLang_free_object (&x);
-
-   if (-1 == SLroll_stack (num_args + 1))
-     return -1;
-
-   SLang_Num_Function_Args = num_args;
-   return _SLarray_aput ();
-}
-
-
-static int
-set_intrin_lvalue (SLBlock_Type *bc_blk)
-{
-   unsigned char op_type;
-   SLang_Object_Type obja;
-   SLang_Class_Type *cl;
-   SLang_Intrin_Var_Type *ivar;
-   VOID_STAR intrinsic_addr;
-   unsigned char intrinsic_type;
-
-   ivar = bc_blk->b.nt_ivar_blk;
-
-   intrinsic_type = ivar->type;
-   intrinsic_addr = ivar->addr;
-
-   op_type = bc_blk->bc_sub_type;
-
-   cl = _SLclass_get_class (intrinsic_type);
-
-   if (op_type != _SLANG_BCST_ASSIGN)
-     {
-	/* We want to get the current value into obja.  This is the
-	 * easiest way.
-	 */
-	if ((-1 == (*cl->cl_push) (intrinsic_type, intrinsic_addr))
-	    || (-1 == SLang_pop (&obja)))
-	  return -1;
-
-	(void) perform_lvalue_operation (op_type, &obja);
-	SLang_free_object (&obja);
-
-	if (SLang_Error)
-	  return -1;
-     }
-
-   return (*cl->cl_pop) (intrinsic_type, intrinsic_addr);
-}
-
-int _SLang_deref_assign (SLang_Ref_Type *ref)
-{
-   SLang_Object_Type *objp;
-   SLang_Name_Type *nt;
-   SLBlock_Type blk;
-
-   if (ref->is_global == 0)
-     {
-	objp = ref->v.local_obj;
-	if (objp > Local_Variable_Frame)
-	  {
-	     SLang_verror (SL_UNDEFINED_NAME, "Local variable reference is out of scope");
-	     return -1;
-	  }
-	return set_lvalue_obj (_SLANG_BCST_ASSIGN, objp);
-     }
-
-   nt = ref->v.nt;
-   switch (nt->name_type)
-     {
-      case SLANG_GVARIABLE:
-      case SLANG_PVARIABLE:
-	if (-1 == set_lvalue_obj (_SLANG_BCST_ASSIGN,
-				  &((SLang_Global_Var_Type *)nt)->obj))
-	  {
-	     do_name_type_error (nt);
-	     return -1;
-	  }
-	break;
-
-      case SLANG_IVARIABLE:
-	blk.b.nt_blk = nt;
-	blk.bc_sub_type = _SLANG_BCST_ASSIGN;
-	if (-1 == set_intrin_lvalue (&blk))
-	  {
-	     do_name_type_error (nt);
-	     return -1;
-	  }
-	break;
-
-      case SLANG_LVARIABLE:
-	SLang_Error = SL_INTERNAL_ERROR;
-	/* set_intrin_lvalue (&blk); */
-	return -1;
-
-      case SLANG_RVARIABLE:
-      default:
-	SLang_verror (SL_READONLY_ERROR, "deref assignment to %s not allowed", nt->name);
-	return -1;
-     }
-
-   return 0;
-}
-
-static void set_deref_lvalue (SLBlock_Type *bc_blk)
-{
-   SLang_Object_Type *objp;
-   SLang_Ref_Type *ref;
-
-   switch (bc_blk->bc_sub_type)
-     {
-      case SLANG_LVARIABLE:
-	objp =  (Local_Variable_Frame - bc_blk->b.i_blk);
-	break;
-      case SLANG_GVARIABLE:
-      case SLANG_PVARIABLE:
-	objp = &bc_blk->b.nt_gvar_blk->obj;
-	break;
-      default:
-	SLang_Error = SL_INTERNAL_ERROR;
-	return;
-     }
-
-   if (-1 == _SLpush_slang_obj (objp))
-     return;
-
-   if (-1 == SLang_pop_ref (&ref))
-     return;
-   (void) _SLang_deref_assign (ref);
-   SLang_free_ref (ref);
-}
-
-static int push_struct_field (char *name)
-{
-   int type;
-   SLang_Class_Type *cl;
-
-   if (-1 == (type = SLang_peek_at_stack ()))
-     return -1;
-
-   cl = _SLclass_get_class ((unsigned char) type);
-   if (cl->cl_sget == NULL)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "%s does not permit structure access",
-		      cl->cl_name);
-	SLdo_pop_n (2);
-	return -1;
-     }
-
-   return (*cl->cl_sget) ((unsigned char) type, name);
-}
-
-static void trace_dump (char *format, char *name, SLang_Object_Type *objs, int n, int dir)
-{
-   unsigned int len;
-   char prefix [52];
-
-   len = Trace_Mode - 1;
-   if (len + 2 >= sizeof (prefix))
-     len = sizeof (prefix) - 2;
-
-   SLMEMSET (prefix, ' ', len);
-   prefix[len] = 0;
-
-   call_dump_routine (prefix);
-   call_dump_routine (format, name, n);
-
-   if (n > 0)
-     {
-	prefix[len] = ' ';
-	len++;
-	prefix[len] = 0;
-
-	_SLdump_objects (prefix, objs, n, dir);
-     }
-}
-
-/*  Pop a data item from the stack and return a pointer to it.
- *  Strings are not freed from stack so use another routine to do it.
- */
-static VOID_STAR pop_pointer (SLang_Object_Type *obj, unsigned char type)
-{
-#ifndef _SLANG_OPTIMIZE_FOR_SPEED
-   SLang_Class_Type *cl;
-#endif
-
-   SLang_Array_Type *at;
-
-   /* Arrays are special.  Allow scalars to automatically convert to arrays.
-    */
-   if (type == SLANG_ARRAY_TYPE)
-     {
-	if (-1 == SLang_pop_array (&at, 1))
-	  return NULL;
-	obj->data_type = SLANG_ARRAY_TYPE;
-	return obj->v.ptr_val = (VOID_STAR) at;
-     }
-
-   if (type == 0)
-     {
-	/* This happens when an intrinsic is declared without any information
-	 * regarding parameter types.
-	 */
-	if (-1 == SLang_pop (obj))
-	  return NULL;
-	type = obj->data_type;
-     }
-   else if (-1 == _SLang_pop_object_of_type (type, obj, 0))
-     return NULL;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   type = _SLclass_Class_Type [type];
-#else
-   type = _SLclass_get_class (type)->cl_class_type;
-#endif
-
-   if (type == SLANG_CLASS_TYPE_SCALAR)
-     return (VOID_STAR) &obj->v;
-   else if (type == SLANG_CLASS_TYPE_MMT)
-     return SLang_object_from_mmt (obj->v.ref);
-   else
-     return obj->v.ptr_val;
-}
-
-/* This is ugly.  Does anyone have a advice for a cleaner way of doing
- * this??
- */
-typedef void (*VF0_Type)(void);
-typedef void (*VF1_Type)(VOID_STAR);
-typedef void (*VF2_Type)(VOID_STAR, VOID_STAR);
-typedef void (*VF3_Type)(VOID_STAR, VOID_STAR, VOID_STAR);
-typedef void (*VF4_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef void (*VF5_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef void (*VF6_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef void (*VF7_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef long (*LF0_Type)(void);
-typedef long (*LF1_Type)(VOID_STAR);
-typedef long (*LF2_Type)(VOID_STAR, VOID_STAR);
-typedef long (*LF3_Type)(VOID_STAR, VOID_STAR, VOID_STAR);
-typedef long (*LF4_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef long (*LF5_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef long (*LF6_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef long (*LF7_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-#if SLANG_HAS_FLOAT
-typedef double (*FF0_Type)(void);
-typedef double (*FF1_Type)(VOID_STAR);
-typedef double (*FF2_Type)(VOID_STAR, VOID_STAR);
-typedef double (*FF3_Type)(VOID_STAR, VOID_STAR, VOID_STAR);
-typedef double (*FF4_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef double (*FF5_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef double (*FF6_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef double (*FF7_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-#endif
-
-static int execute_intrinsic_fun (SLang_Intrin_Fun_Type *objf)
-{
-#if SLANG_HAS_FLOAT
-   double xf;
-#endif
-   VOID_STAR p[SLANG_MAX_INTRIN_ARGS];
-   SLang_Object_Type objs[SLANG_MAX_INTRIN_ARGS];
-   long ret;
-   unsigned char type;
-   unsigned int argc;
-   unsigned int i;
-   FVOID_STAR fptr;
-   unsigned char *arg_types;
-   int stk_depth;
-
-   fptr = objf->i_fun;
-   argc = objf->num_args;
-   type = objf->return_type;
-   arg_types = objf->arg_types;
-
-   if (argc > SLANG_MAX_INTRIN_ARGS)
-     {
-	SLang_verror(SL_APPLICATION_ERROR,
-		     "Intrinsic function %s requires too many parameters", objf->name);
-	return -1;
-     }
-
-   if (-1 == _SL_increment_frame_pointer ())
-     return -1;
-
-   stk_depth = -1;
-   if (Trace_Mode && (_SLang_Trace > 0))
-     {
-	int nargs;
-
-	stk_depth = _SLstack_depth ();
-
-	nargs = SLang_Num_Function_Args;
-	if (nargs == 0)
-	  nargs = (int)argc;
-
-	stk_depth -= nargs;
-
-	if (stk_depth >= 0)
-	  trace_dump (">>%s (%d args)\n",
-		      objf->name,
-		      _SLStack_Pointer - nargs,
-		      nargs,
-		      1);
-     }
-
-   i = argc;
-   while (i != 0)
-     {
-	i--;
-	if (NULL == (p[i] = pop_pointer (objs + i, arg_types[i])))
-	  {
-	     i++;
-	     goto free_and_return;
-	  }
-     }
-
-   ret = 0;
-#if SLANG_HAS_FLOAT
-   xf = 0.0;
-#endif
-
-   switch (argc)
-     {
-      case 0:
-	if (type == SLANG_VOID_TYPE) ((VF0_Type) fptr) ();
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf = ((FF0_Type) fptr)();
-#endif
-	else ret = ((LF0_Type) fptr)();
-	break;
-
-      case 1:
-	if (type == SLANG_VOID_TYPE) ((VF1_Type) fptr)(p[0]);
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf =  ((FF1_Type) fptr)(p[0]);
-#endif
-	else ret =  ((LF1_Type) fptr)(p[0]);
-	break;
-
-      case 2:
-	if (type == SLANG_VOID_TYPE)  ((VF2_Type) fptr)(p[0], p[1]);
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf = ((FF2_Type) fptr)(p[0], p[1]);
-#endif
-	else ret = ((LF2_Type) fptr)(p[0], p[1]);
-	break;
-
-      case 3:
-	if (type == SLANG_VOID_TYPE) ((VF3_Type) fptr)(p[0], p[1], p[2]);
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf = ((FF3_Type) fptr)(p[0], p[1], p[2]);
-#endif
-	else ret = ((LF3_Type) fptr)(p[0], p[1], p[2]);
-	break;
-
-      case 4:
-	if (type == SLANG_VOID_TYPE) ((VF4_Type) fptr)(p[0], p[1], p[2], p[3]);
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf = ((FF4_Type) fptr)(p[0], p[1], p[2], p[3]);
-#endif
-	else ret = ((LF4_Type) fptr)(p[0], p[1], p[2], p[3]);
-	break;
-
-      case 5:
-	if (type == SLANG_VOID_TYPE) ((VF5_Type) fptr)(p[0], p[1], p[2], p[3], p[4]);
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf = ((FF5_Type) fptr)(p[0], p[1], p[2], p[3], p[4]);
-#endif
-	else ret = ((LF5_Type) fptr)(p[0], p[1], p[2], p[3], p[4]);
-	break;
-
-      case 6:
-	if (type == SLANG_VOID_TYPE) ((VF6_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5]);
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf = ((FF6_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5]);
-#endif
-	else ret = ((LF6_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5]);
-	break;
-
-      case 7:
-	if (type == SLANG_VOID_TYPE) ((VF7_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5], p[6]);
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf = ((FF7_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5], p[6]);
-#endif
-	else ret = ((LF7_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5], p[6]);
-	break;
-     }
-
-   switch (type)
-     {
-      case SLANG_VOID_TYPE:
-	break;
-	
-#if SLANG_HAS_FLOAT
-      case SLANG_DOUBLE_TYPE:
-	(void) SLang_push_double (xf);
-	break;
-#endif
-      case SLANG_UINT_TYPE:
-      case SLANG_INT_TYPE: (void) SLclass_push_int_obj (type, (int) ret);
-	break;
-	
-      case SLANG_CHAR_TYPE:
-      case SLANG_UCHAR_TYPE: (void) SLclass_push_char_obj (type, (char) ret);
-	break;
-
-      case SLANG_SHORT_TYPE:
-      case SLANG_USHORT_TYPE: (void) SLclass_push_short_obj (type, (short) ret);
-	break;
-
-      case SLANG_LONG_TYPE:
-      case SLANG_ULONG_TYPE: (void) SLclass_push_long_obj (type, ret);
-	break;
-	
-      case SLANG_STRING_TYPE:
-	if (NULL == (char *)ret)
-	  {
-	     if (SLang_Error == 0) SLang_Error = SL_INTRINSIC_ERROR;
-	  }
-	else (void) SLang_push_string ((char *)ret);
-	break;
-	
-      default:
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "Support for intrinsic functions returning %s is not provided",
-		      SLclass_get_datatype_name (type));
-     }
-
-   if (stk_depth >= 0)
-     {
-	stk_depth = _SLstack_depth () - stk_depth;
-
-	trace_dump ("<<%s (returning %d values)\n",
-		      objf->name,
-		      _SLStack_Pointer - stk_depth,
-		      stk_depth,
-		      1);
-     }
-
-   free_and_return:
-   while (i < argc)
-     {
-	SLang_free_object (objs + i);
-	i++;
-     }
-
-   return _SL_decrement_frame_pointer ();
-}
-
-static int inner_interp(register SLBlock_Type *);
-
-/* Switch_Obj_Ptr points to the NEXT available free switch object */
-static SLang_Object_Type Switch_Objects[SLANG_MAX_NESTED_SWITCH];
-static SLang_Object_Type *Switch_Obj_Ptr = Switch_Objects;
-static SLang_Object_Type *Switch_Obj_Max = Switch_Objects + SLANG_MAX_NESTED_SWITCH;
-
-static void
-lang_do_loops (unsigned char stype, SLBlock_Type *block, unsigned int num_blocks)
-{
-   int i, ctrl;
-   int first, last;
-   SLBlock_Type *blks[4];
-   char *loop_name;
-   SLang_Foreach_Context_Type *foreach_context;
-   SLang_Class_Type *cl;
-   int type;
-   unsigned int j;
-
-   j = 0;
-   for (i = 0; i < (int) num_blocks; i++)
-     {
-	if (block[i].bc_main_type != _SLANG_BC_BLOCK)
-	  {
-	     if (block[i].bc_main_type == _SLANG_BC_LINE_NUM)
-	       continue;
-
-	     SLang_verror (SL_SYNTAX_ERROR, "Bytecode is not a looping block");
-	     return;
-	  }
-	blks[j] = block[i].b.blk;
-	j++;
-     }
-
-   num_blocks = j;
-   block = blks[0];
-
-   switch (stype)
-     {
-      case _SLANG_BCST_FOREACH:
-	loop_name = "foreach";
-	if (num_blocks != 1)
-	  goto wrong_num_blocks_error;
-
-	/* We should find Next_Function_Num_Args + 1 items on the stack.
-	 * The first Next_Function_Num_Args items represent the arguments to
-	 * to USING.  The last item (deepest in stack) is the object to loop
-	 * over.  So, roll the stack up and grab it.
-	 */
-	if ((-1 == SLroll_stack (-(Next_Function_Num_Args + 1)))
-	    || (-1 == (type = SLang_peek_at_stack ())))
-	  goto return_error;
-
-	cl = _SLclass_get_class ((unsigned char) type);
-	if ((cl->cl_foreach == NULL)
-	    || (cl->cl_foreach_open == NULL)
-	    || (cl->cl_foreach_close == NULL))
-	  {
-	     SLang_verror (SL_NOT_IMPLEMENTED, "%s does not permit foreach", cl->cl_name);
-	     SLdo_pop_n (Next_Function_Num_Args + 1);
-	     goto return_error;
-	  }
-
-	if (NULL == (foreach_context = (*cl->cl_foreach_open) ((unsigned char)type, Next_Function_Num_Args)))
-	  goto return_error;
-
-	while (1)
-	  {
-	     int status;
-
-	     if (SLang_Error)
-	       {
-		  (*cl->cl_foreach_close) ((unsigned char) type, foreach_context);
-		  goto return_error;
-	       }
-
-	     status = (*cl->cl_foreach) ((unsigned char) type, foreach_context);
-	     if (status <= 0)
-	       {
-		  if (status == 0)
-		    break;
-
-		  (*cl->cl_foreach_close) ((unsigned char) type, foreach_context);
-		  goto return_error;
-	       }
-
-	     inner_interp (block);
-	     if (Lang_Break) break;
-	     Lang_Break_Condition = /* Lang_Continue = */ 0;
-	  }
-	(*cl->cl_foreach_close) ((unsigned char) type, foreach_context);
-	break;
-
-      case _SLANG_BCST_WHILE:
-	loop_name = "while";
-
-	if (num_blocks != 2)
-	  goto wrong_num_blocks_error;
-
-	type = blks[1]->bc_main_type;
-	while (1)
-	  {
-	     if (SLang_Error)
-	       goto return_error;
-
-	     inner_interp (block);
-	     if (Lang_Break) break;
-
-	     if (-1 == pop_ctrl_integer (&ctrl))
-	       goto return_error;
-
-	     if (ctrl == 0) break;
-
-	     if (type)
-	       {
-		  inner_interp (blks[1]);
-		  if (Lang_Break) break;
-		  Lang_Break_Condition = /* Lang_Continue = */ 0;
-	       }
-	  }
-	break;
-
-      case _SLANG_BCST_DOWHILE:
-	loop_name = "do...while";
-
-	if (num_blocks != 2)
-	  goto wrong_num_blocks_error;
-
-	while (1)
-	  {
-	     if (SLang_Error)
-	       goto return_error;
-
-	     Lang_Break_Condition = /* Lang_Continue = */ 0;
-	     inner_interp (block);
-	     if (Lang_Break) break;
-	     Lang_Break_Condition = /* Lang_Continue = */ 0;
-	     inner_interp (blks[1]);
-	     if (-1 == pop_ctrl_integer (&ctrl))
-	       goto return_error;
-
-	     if (ctrl == 0) break;
-	  }
-	break;
-
-      case _SLANG_BCST_CFOR:
-	loop_name = "for";
-
-	/* we need 4 blocks: first 3 control, the last is code */
-	if (num_blocks != 4) goto wrong_num_blocks_error;
-
-	inner_interp (block);
-	while (1)
-	  {
-	     if (SLang_Error)
-	       goto return_error;
-
-	     inner_interp(blks[1]);       /* test */
-	     if (-1 == pop_ctrl_integer (&ctrl))
-	       goto return_error;
-
-	     if (ctrl == 0) break;
-	     inner_interp(blks[3]);       /* code */
-	     if (Lang_Break) break;
-	     inner_interp(blks[2]);       /* bump */
-	     Lang_Break_Condition = /* Lang_Continue = */ 0;
-	  }
-	break;
-
-      case _SLANG_BCST_FOR:
-	loop_name = "_for";
-
-	if (num_blocks != 1)
-	  goto wrong_num_blocks_error;
-
-	/* 3 elements: first, last, step */
-	if ((-1 == SLang_pop_integer (&ctrl))
-	    || (-1 == SLang_pop_integer (&last))
-	    || (-1 == SLang_pop_integer (&first)))
-	  goto return_error;
-
-	i = first;
-	while (1)
-	  {
-	     /* It is ugly to have this test here but I do not know of a
-	      * simple way to do this without using two while loops.
-	      */
-	     if (ctrl >= 0)
-	       {
-		  if (i > last) break;
-	       }
-	     else if (i < last) break;
-
-	     if (SLang_Error) goto return_error;
-
-	     SLclass_push_int_obj (SLANG_INT_TYPE, i);
-	     inner_interp (block);
-	     if (Lang_Break) break;
-	     Lang_Break_Condition = /* Lang_Continue = */ 0;
-
-	     i += ctrl;
-	  }
-	break;
-
-      case _SLANG_BCST_LOOP:
-	loop_name = "loop";
-	if (num_blocks != 1)
-	  goto wrong_num_blocks_error;
-
-	if (-1 == SLang_pop_integer (&ctrl))
-	  goto return_error;
-	while (ctrl > 0)
-	  {
-	     ctrl--;
-
-	     if (SLang_Error)
-	       goto return_error;
-
-	     inner_interp (block);
-	     if (Lang_Break) break;
-	     Lang_Break_Condition = /* Lang_Continue = */ 0;
-	  }
-	break;
-
-      case _SLANG_BCST_FOREVER:
-	loop_name = "forever";
-
-	if (num_blocks != 1)
-	  goto wrong_num_blocks_error;
-
-	while (1)
-	  {
-	     if (SLang_Error)
-	       goto return_error;
-
-	     inner_interp (block);
-	     if (Lang_Break) break;
-	     Lang_Break_Condition = /* Lang_Continue = */ 0;
-	  }
-	break;
-
-      default:  SLang_verror(SL_INTERNAL_ERROR, "Unknown loop type");
-	return;
-     }
-   Lang_Break = /* Lang_Continue = */ 0;
-   Lang_Break_Condition = Lang_Return;
-   return;
-
-   wrong_num_blocks_error:
-   SLang_verror (SL_SYNTAX_ERROR, "Wrong number of blocks for '%s' construct", loop_name);
-
-   /* drop */
-   return_error:
-   do_traceback (loop_name, 0, NULL);
-}
-
-static void lang_do_and_orelse (unsigned char stype, SLBlock_Type *addr, SLBlock_Type *addr_max)
-{
-   int test = 0;
-   int is_or;
-
-   is_or = (stype == _SLANG_BCST_ORELSE);
-
-   while (addr <= addr_max)
-     {
-	if (addr->bc_main_type == _SLANG_BC_LINE_NUM)
-	  {
-	     addr++;
-	     continue;
-	  }
-
-	inner_interp (addr->b.blk);
-	if (SLang_Error
-	    || Lang_Break_Condition
-	    || (-1 == pop_ctrl_integer (&test)))
-	  return;
-
-	if (is_or == (test != 0))
-	  break;
-
-	/* if (((stype == _SLANG_BCST_ANDELSE) && (test == 0))
-	 *   || ((stype == _SLANG_BCST_ORELSE) && test))
-	 * break;
-	 */
-
-	addr++;
-     }
-   SLclass_push_int_obj (SLANG_INT_TYPE, test);
-}
-
-static void do_else_if (SLBlock_Type *zero_block, SLBlock_Type *non_zero_block)
-{
-   int test;
-
-   if (-1 == pop_ctrl_integer (&test))
-     return;
-
-   if (test == 0)
-     non_zero_block = zero_block;
-
-   if (non_zero_block != NULL)
-     inner_interp (non_zero_block->b.blk);
-}
-
-int _SLang_trace_fun (char *f)
-{
-   if (NULL == (f = SLang_create_slstring (f)))
-     return -1;
-
-   SLang_free_slstring (Trace_Function);
-   Trace_Function = f;
-   _SLang_Trace = 1;
-   return 0;
-}
-
-int _SLdump_objects (char *prefix, SLang_Object_Type *x, unsigned int n, int dir)
-{
-   char *s;
-   SLang_Class_Type *cl;
-
-   while (n)
-     {
-	cl = _SLclass_get_class (x->data_type);
-
-	if (NULL == (s = _SLstringize_object (x)))
-	  s = "??";
-
-	call_dump_routine ("%s[%s]:%s\n", prefix, cl->cl_name, s);
-
-	SLang_free_slstring (s);
-
-	x += dir;
-	n--;
-     }
-   return 0;
-}
-
-static SLBlock_Type *Exit_Block_Ptr;
-static SLBlock_Type *Global_User_Block[5];
-static SLBlock_Type **User_Block_Ptr = Global_User_Block;
-char *_SLang_Current_Function_Name = NULL;
-
-static int execute_slang_fun (_SLang_Function_Type *fun)
-{
-   register unsigned int i;
-   register SLang_Object_Type *frame, *lvf;
-   register unsigned int n_locals;
-   _SLBlock_Header_Type *header;
-   /* SLBlock_Type *val; */
-   SLBlock_Type *exit_block_save;
-   SLBlock_Type **user_block_save;
-   SLBlock_Type *user_blocks[5];
-   char *save_fname;
-
-   exit_block_save = Exit_Block_Ptr;
-   user_block_save = User_Block_Ptr;
-   User_Block_Ptr = user_blocks;
-   *(user_blocks) = NULL;
-   *(user_blocks + 1) = NULL;
-   *(user_blocks + 2) = NULL;
-   *(user_blocks + 3) = NULL;
-   *(user_blocks + 4) = NULL;
-
-   Exit_Block_Ptr = NULL;
-
-   save_fname = _SLang_Current_Function_Name;
-   _SLang_Current_Function_Name = fun->name;
-
-   _SL_increment_frame_pointer ();
-
-   /* need loaded?  */
-   if (fun->nlocals == AUTOLOAD_NUM_LOCALS)
-     {
-	header = NULL;
-	if (-1 == SLang_load_file(fun->v.autoload_filename))
-	  goto the_return;
-
-	if (fun->nlocals == AUTOLOAD_NUM_LOCALS)
-	  {
-	     SLang_verror (SL_UNDEFINED_NAME, "%s: Function did not autoload",
-			   _SLang_Current_Function_Name);
-             goto the_return;
-	  }
-     }
-
-   n_locals = fun->nlocals;
-
-   /* let the error propagate through since it will do no harm
-    and allow us to restore stack. */
-
-   /* set new stack frame */
-   lvf = frame = Local_Variable_Frame;
-   i = n_locals;
-   if ((lvf + i) > Local_Variable_Stack + SLANG_MAX_LOCAL_STACK)
-     {
-	SLang_verror(SL_STACK_OVERFLOW, "%s: Local Variable Stack Overflow",
-		     _SLang_Current_Function_Name);
-	goto the_return;
-     }
-
-   /* Make sure we do not allow this header to get destroyed by something
-    * like:  define crash () { eval ("define crash ();") }
-    */
-   header = fun->v.header;
-   header->num_refs++;
-
-   while (i--)
-     {
-	lvf++;
-	lvf->data_type = SLANG_UNDEFINED_TYPE;
-     }
-   Local_Variable_Frame = lvf;
-
-   /* read values of function arguments */
-   i = fun->nargs;
-   while (i > 0)
-     {
-	i--;
-	(void) SLang_pop (Local_Variable_Frame - i);
-     }
-
-   if (SLang_Enter_Function != NULL) (*SLang_Enter_Function)(_SLang_Current_Function_Name);
-
-   if (_SLang_Trace)
-     {
-	int stack_depth;
-
-	stack_depth = _SLstack_depth ();
-
-	if ((Trace_Function != NULL)
-	    && (0 == strcmp (Trace_Function, _SLang_Current_Function_Name))
-	    && (Trace_Mode == 0))
-	  Trace_Mode = 1;
-
-	if (Trace_Mode)
-	  {
-	     /* The local variable frame grows backwards */
-	     trace_dump (">>%s (%d args)\n",
-			 _SLang_Current_Function_Name,
-			 Local_Variable_Frame,
-			 (int) fun->nargs,
-			 -1);
-	     Trace_Mode++;
-	  }
-
-	inner_interp (header->body);
-	Lang_Break_Condition = Lang_Return = Lang_Break = 0;
-	if (Exit_Block_Ptr != NULL) inner_interp(Exit_Block_Ptr);
-
-	if (Trace_Mode)
-	  {
-	     Trace_Mode--;
-	     stack_depth = _SLstack_depth () - stack_depth;
-
-	     trace_dump ("<<%s (returning %d values)\n",
-			 _SLang_Current_Function_Name,
-			 _SLStack_Pointer - stack_depth,
-			 stack_depth,
-			 1);
-
-	     if (Trace_Mode == 1)
-	       Trace_Mode = 0;
-	  }
-     }
-   else
-     {
-	inner_interp (header->body);
-	Lang_Break_Condition = Lang_Return = Lang_Break = 0;
-	if (Exit_Block_Ptr != NULL) inner_interp(Exit_Block_Ptr);
-     }
-
-   if (SLang_Exit_Function != NULL) (*SLang_Exit_Function)(_SLang_Current_Function_Name);
-
-   if (SLang_Error)
-     do_traceback(fun->name, n_locals,
-#if _SLANG_HAS_DEBUG_CODE
-		  fun->file
-#else
-		  NULL
-#endif
-		  );
-
-   /* free local variables.... */
-   lvf = Local_Variable_Frame;
-   while (lvf > frame)
-     {
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [lvf->data_type])
-#endif
-	  SLang_free_object (lvf);
-	lvf--;
-     }
-   Local_Variable_Frame = lvf;
-
-   if (header->num_refs == 1)
-     free_function_header (header);
-   else
-     header->num_refs--;
-
-   the_return:
-
-   Lang_Break_Condition = Lang_Return = Lang_Break = 0;
-   Exit_Block_Ptr = exit_block_save;
-   User_Block_Ptr = user_block_save;
-   _SLang_Current_Function_Name = save_fname;
-   _SL_decrement_frame_pointer ();
-
-   if (SLang_Error)
-     return -1;
-
-   return 0;
-}
-
-static void do_traceback (char *name, unsigned int locals, char *file)
-{
-   char *s;
-   unsigned int i;
-   SLang_Object_Type *objp;
-   unsigned short stype;
-
-   /* FIXME: Priority=low
-    * I need to make this configurable!!! That is, let the
-    * application decide whether or not a usage error should result in a
-    * traceback.
-    */
-   if (SLang_Error == SL_USAGE_ERROR)
-     return;
-
-   if (SLang_Traceback == 0)
-     return;
-
-   call_dump_routine ("S-Lang Traceback: %s\n", name);
-   if (SLang_Traceback < 0)
-     return;
-
-   if (file != NULL)
-     call_dump_routine ("File: %s\n", file);
-
-   if (locals == 0)
-     return;
-
-   call_dump_routine ("  Local Variables:\n");
-
-   for (i = 0; i < locals; i++)
-     {
-	SLang_Class_Type *cl;
-	char *class_name;
-
-	objp = Local_Variable_Frame - i;
-	stype = objp->data_type;
-
-	s = _SLstringize_object (objp);
-	cl = _SLclass_get_class (stype);
-	class_name = cl->cl_name;
-
-	call_dump_routine ("\t$%d: Type: %s,\tValue:\t", i, class_name);
-
-	if (s == NULL) call_dump_routine("??\n");
-	else
-	  {
-	     char *q = "";
-#ifndef HAVE_VSNPRINTF
-	     char buf[256];
-	     if (strlen (s) >= sizeof (buf))
-	       {
-		  strncpy (buf, s, sizeof(buf));
-		  s = buf;
-		  s[sizeof(buf) - 1] = 0;
-	       }
-#endif
-	     if (SLANG_STRING_TYPE == stype) q = "\"";
-	     call_dump_routine ("%s%s%s\n", q, s, q);
-	  }
-     }
-}
-
-static void do_app_unary (SLang_App_Unary_Type *nt)
-{
-   if (-1 == do_unary (nt->unary_op, nt->name_type))
-     do_traceback (nt->name, 0, NULL);
-}
-
-static int inner_interp_nametype (SLang_Name_Type *nt)
-{
-   SLBlock_Type bc_blks[2];
-
-   bc_blks[0].b.nt_blk = nt;
-   bc_blks[0].bc_main_type = nt->name_type;
-   bc_blks[1].bc_main_type = 0;
-   return inner_interp(bc_blks);
-}
-
-int _SLang_dereference_ref (SLang_Ref_Type *ref)
-{
-   if (ref == NULL)
-     {
-	SLang_Error = SL_INTERNAL_ERROR;
-	return -1;
-     }
-
-   if (ref->is_global == 0)
-     {
-	SLang_Object_Type *obj = ref->v.local_obj;
-	if (obj > Local_Variable_Frame)
-	  {
-	     SLang_verror (SL_UNDEFINED_NAME, "Local variable deref is out of scope");
-	     return -1;
-	  }
-	return _SLpush_slang_obj (ref->v.local_obj);
-     }
-
-   (void) inner_interp_nametype (ref->v.nt);
-   return 0;
-}
-
-int _SLang_is_ref_initialized (SLang_Ref_Type *ref)
-{
-   unsigned char type;
-
-   if (ref == NULL)
-     {
-	SLang_Error = SL_INTERNAL_ERROR;
-	return -1;
-     }
-
-   if (ref->is_global == 0)
-     {
-	SLang_Object_Type *obj = ref->v.local_obj;
-	if (obj > Local_Variable_Frame)
-	  {
-	     SLang_verror (SL_UNDEFINED_NAME, "Local variable deref is out of scope");
-	     return -1;
-	  }
-	type = ref->v.local_obj->data_type;
-     }
-   else
-     {
-	SLang_Name_Type *nt = ref->v.nt;
-	if ((nt->name_type != SLANG_GVARIABLE)
-	    && (nt->name_type != SLANG_PVARIABLE))
-	  return 1;
-	type = ((SLang_Global_Var_Type *)nt)->obj.data_type;
-     }
-   return type != SLANG_UNDEFINED_TYPE;
-}
-
-int _SLang_uninitialize_ref (SLang_Ref_Type *ref)
-{
-   SLang_Object_Type *obj;
-
-   if (ref == NULL)
-     {
-	SLang_Error = SL_INTERNAL_ERROR;
-	return -1;
-     }
-
-   if (ref->is_global == 0)
-     {
-	obj = ref->v.local_obj;
-	if (obj > Local_Variable_Frame)
-	  {
-	     SLang_verror (SL_UNDEFINED_NAME, "Local variable deref is out of scope");
-	     return -1;
-	  }
-	obj = ref->v.local_obj;
-     }
-   else
-     {
-	SLang_Name_Type *nt = ref->v.nt;
-	if ((nt->name_type != SLANG_GVARIABLE)
-	    && (nt->name_type != SLANG_PVARIABLE))
-	  return -1;
-	obj = &((SLang_Global_Var_Type *)nt)->obj;
-     }
-   SLang_free_object (obj);
-   obj->data_type = SLANG_UNDEFINED_TYPE;
-   obj->v.ptr_val = NULL;
-   return 0;
-}
-
-void (*SLang_Interrupt)(void);
-static int Last_Error;
-void (*SLang_User_Clear_Error)(void);
-void _SLang_clear_error (void)
-{
-   if (Last_Error <= 0)
-     {
-	Last_Error = 0;
-	return;
-     }
-   Last_Error--;
-   if (SLang_User_Clear_Error != NULL) (*SLang_User_Clear_Error)();
-}
-
-int _SLpush_slang_obj (SLang_Object_Type *obj)
-{
-   unsigned char subtype;
-   SLang_Class_Type *cl;
-
-   if (obj == NULL) return SLang_push_null ();
-
-   subtype = obj->data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type[subtype])
-     return SLang_push (obj);
-#endif
-
-   cl = _SLclass_get_class (subtype);
-   return (*cl->cl_push) (subtype, (VOID_STAR) &obj->v);
-}
-
-_INLINE_
-static int push_local_variable (int i)
-{
-   SLang_Class_Type *cl;
-   SLang_Object_Type *obj;
-   unsigned char subtype;
-
-   obj = Local_Variable_Frame - i;
-   subtype = obj->data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type[subtype])
-     return SLang_push (obj);
-   if (subtype == SLANG_STRING_TYPE)
-     return _SLang_dup_and_push_slstring (obj->v.s_val);
-#endif
-
-   cl = _SLclass_get_class (subtype);
-   return (*cl->cl_push) (subtype, (VOID_STAR) &obj->v);
-}
-
-static int push_intrinsic_variable (SLang_Intrin_Var_Type *ivar)
-{
-   SLang_Class_Type *cl;
-   unsigned char stype;
-
-   stype = ivar->type;
-   cl = _SLclass_get_class (stype);
-
-   if (-1 == (*cl->cl_push_intrinsic) (stype, ivar->addr))
-     {
-	do_name_type_error ((SLang_Name_Type *) ivar);
-	return -1;
-     }
-   return 0;
-}
-
-static int dereference_object (void)
-{
-   SLang_Object_Type obj;
-   SLang_Class_Type *cl;
-   unsigned char type;
-   int ret;
-
-   if (-1 == SLang_pop (&obj))
-     return -1;
-
-   type = obj.data_type;
-
-   cl = _SLclass_get_class (type);
-   ret = (*cl->cl_dereference)(type, (VOID_STAR) &obj.v);
-
-   SLang_free_object (&obj);
-   return ret;
-}
-
-static int case_function (void)
-{
-   unsigned char type;
-   SLang_Object_Type obj;
-   SLang_Object_Type *swobjptr;
-
-   swobjptr = Switch_Obj_Ptr - 1;
-
-   if ((swobjptr < Switch_Objects)
-       || (0 == (type = swobjptr->data_type)))
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Misplaced 'case' keyword");
-	return -1;
-     }
-
-   if (-1 == SLang_pop (&obj))
-     return -1;
-
-   if (obj.data_type != type)
-     {
-	SLang_Class_Type *a_cl, *b_cl;
-
-	a_cl = _SLclass_get_class (obj.data_type);
-	b_cl = _SLclass_get_class (type);
-
-	if (NULL == _SLclass_get_binary_fun (SLANG_EQ, a_cl, b_cl, &a_cl, 0))
-	  {
-	     (void) SLclass_push_int_obj (SLANG_INT_TYPE, 0);
-	     SLang_free_object (&obj);
-	     return 0;
-	  }
-     }
-
-   (void) do_binary_ab (SLANG_EQ, swobjptr, &obj);
-   SLang_free_object (&obj);
-   return 0;
-}
-
-static void tmp_variable_function (SLBlock_Type *addr)
-{
-   SLang_Object_Type *obj;
-
-   switch (addr->bc_sub_type)
-     {
-      case SLANG_GVARIABLE:
-      case SLANG_PVARIABLE:
-	obj = &addr->b.nt_gvar_blk->obj;
-	break;
-
-      case SLANG_LVARIABLE:
-	obj = Local_Variable_Frame - addr->b.i_blk;
-	break;
-
-      default:
-	SLang_Error = SL_INTERNAL_ERROR;
-	return;
-     }
-
-   /* There is no need to go through higher level routines since we are
-    * not creating or destroying extra copies.
-    */
-   if (-1 == SLang_push (obj))
-     return;
-
-   obj->data_type = SLANG_UNDEFINED_TYPE;
-   obj->v.ptr_val = NULL;
-}
-
-
-static int
-do_inner_interp_error (SLBlock_Type *err_block,
-		       SLBlock_Type *addr_start,
-		       SLBlock_Type *addr)
-{
-   int save_err, slerr;
-
-   /* Someday I can use the these variable to provide extra information
-    * about what went wrong.
-    */
-   (void) addr_start;
-   (void) addr;
-
-   if (err_block == NULL)
-     goto return_error;
-
-   if (SLang_Error < 0)		       /* errors less than 0 are severe */
-     goto return_error;
-
-   save_err = Last_Error++;
-   slerr = SLang_Error;
-   SLang_Error = 0;
-   inner_interp (err_block->b.blk);
-
-   if (Last_Error <= save_err)
-     {
-	/* Caught error and cleared it */
-	Last_Error = save_err;
-	if ((Lang_Break_Condition == 0)
-	    /* An error may have cleared the error and then caused the
-	     * function to return.  We will allow that but let's not allow
-	     * 'break' nor 'continue' statements until later.
-	     */
-	    || Lang_Return)
-	  return 0;
-
-	/* drop--- either a break or continue was called */
-     }
-
-   Last_Error = save_err;
-   SLang_Error = slerr;
-
-   return_error:
-#if _SLANG_HAS_DEBUG_CODE
-   while (addr >= addr_start)
-     {
-	if (addr->bc_main_type == _SLANG_BC_LINE_NUM)
-	  {
-	     char buf[256];
-	     sprintf (buf, "(Error occurred on line %lu)", addr->b.l_blk);
-	     do_traceback (buf, 0, NULL);
-	     break;
-	  }
-	/* Special hack for 16 bit systems to prevent pointer wrapping. */
-#if defined(__16_BIT_SYSTEM__)
-	if (addr == addr_start)
-	  break;
-#endif
-	addr--;
-     }
-#endif
-   return -1;
-}
-
-
-#define GATHER_STATISTICS 0
-#if GATHER_STATISTICS
-static unsigned int Bytecodes[0xFFFF];
-
-static void print_stats (void)
-{
-   unsigned int i;
-   unsigned long total;
-   FILE *fp = fopen ("stats.txt", "w");
-   if (fp == NULL)
-     return;
-   
-   total = 0;
-   for (i = 0; i < 0xFFFF; i++)
-     total += Bytecodes[i];
-   
-   if (total == 0)
-     total = 1;
-
-   for (i = 0; i < 0xFFFF; i++)
-     {
-	if (Bytecodes[i])
-	  fprintf (fp, "0x%04X %9u %e\n", i, Bytecodes[i], Bytecodes[i]/(double) total);
-     }
-   fclose (fp);
-}
-
-static void add_to_statistics (SLBlock_Type *b)
-{
-   unsigned short x, y;
-   
-   x = b->bc_main_type;
-   if (x == 0)
-     {
-	Bytecodes[0] += 1;
-	return;
-     }
-   b++;
-   y = b->bc_main_type;
-
-   Bytecodes[(x << 8) | y] += 1;
-}
-
-#endif
-
-/* inner interpreter */
-/* The return value from this function is only meaningful when it is used
- * to process blocks for the switch statement.  If it returns 0, the calling
- * routine should pass the next block to it.  Otherwise it will
- * return non-zero, with or without error.
- */
-static int inner_interp (SLBlock_Type *addr_start)
-{
-   SLBlock_Type *block, *err_block, *addr;
-#if GATHER_STATISTICS
-   static int inited = 0;
-
-   if (inited == 0)
-     {
-	(void) SLang_add_cleanup_function (print_stats);
-	inited = 1;
-     }
-#endif
-
-   /* for systems that have no real interrupt facility (e.g. go32 on dos) */
-   if (SLang_Interrupt != NULL) (*SLang_Interrupt)();
-
-   block = err_block = NULL;
-   addr = addr_start;
-
-#if GATHER_STATISTICS
-   add_to_statistics (addr);
-#endif
-   while (1)
-     {
-	switch (addr->bc_main_type)
-	  {
-	   case 0:
-	     return 1;
-	   case _SLANG_BC_LVARIABLE:
-	     push_local_variable (addr->b.i_blk);
-	     break;
-	   case _SLANG_BC_GVARIABLE:
-	     if (-1 == _SLpush_slang_obj (&addr->b.nt_gvar_blk->obj))
-	       do_name_type_error (addr->b.nt_blk);
-	     break;
-
-	   case _SLANG_BC_IVARIABLE:
-	   case _SLANG_BC_RVARIABLE:
-	     push_intrinsic_variable (addr->b.nt_ivar_blk);
-	     break;
-
-	   case _SLANG_BC_INTRINSIC:
-	     execute_intrinsic_fun (addr->b.nt_ifun_blk);
-	     if (SLang_Error)
-	       do_traceback(addr->b.nt_ifun_blk->name, 0, NULL);
-	     break;
-
-	   case _SLANG_BC_FUNCTION:
-	     execute_slang_fun (addr->b.nt_fun_blk);
-	     if (Lang_Break_Condition) goto handle_break_condition;
-	     break;
-
-	   case _SLANG_BC_MATH_UNARY:
-	   case _SLANG_BC_APP_UNARY:
-	     /* Make sure we treat these like function calls since the
-	      * parser took sin(x) to be a function call.
-	      */
-	     if (0 == _SL_increment_frame_pointer ())
-	       {
-		  do_app_unary (addr->b.nt_unary_blk);
-		  (void) _SL_decrement_frame_pointer ();
-	       }
-	     break;
-
-	   case _SLANG_BC_ICONST:
-	     SLclass_push_int_obj (SLANG_INT_TYPE, addr->b.iconst_blk->i);
-	     break;
-
-#if SLANG_HAS_FLOAT
-	   case _SLANG_BC_DCONST:
-	     SLang_push_double (addr->b.dconst_blk->d);
-	     break;
-#endif
-
-	   case _SLANG_BC_PVARIABLE:
-	     if (-1 == _SLpush_slang_obj (&addr->b.nt_gvar_blk->obj))
-	       do_name_type_error (addr->b.nt_blk);
-	     break;
-
-	   case _SLANG_BC_PFUNCTION:
-	     execute_slang_fun (addr->b.nt_fun_blk);
-	     if (Lang_Break_Condition) goto handle_break_condition;
-	     break;
-
-	   case _SLANG_BC_BINARY:
-	     do_binary (addr->b.i_blk);
-	     break;
-	     
-	   case _SLANG_BC_LITERAL:
-#if !_SLANG_OPTIMIZE_FOR_SPEED
-	   case _SLANG_BC_LITERAL_INT:
-	   case _SLANG_BC_LITERAL_STR:
-#endif
-	       {
-		  SLang_Class_Type *cl = _SLclass_get_class (addr->bc_sub_type);
-		  (*cl->cl_push_literal) (addr->bc_sub_type, (VOID_STAR) &addr->b.ptr_blk);
-	       }
-	     break;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	   case _SLANG_BC_LITERAL_INT:
-	     SLclass_push_int_obj (addr->bc_sub_type, (int) addr->b.l_blk);
-	     break;
-
-	   case _SLANG_BC_LITERAL_STR:
-	     _SLang_dup_and_push_slstring (addr->b.s_blk);
-	     break;
-#endif
-	   case _SLANG_BC_BLOCK:
-	     switch (addr->bc_sub_type)
-	       {
-		case _SLANG_BCST_ERROR_BLOCK:
-		  err_block = addr;
-		  break;
-
-		case _SLANG_BCST_EXIT_BLOCK:
-		  Exit_Block_Ptr = addr->b.blk;
-		  break;
-
-		case _SLANG_BCST_USER_BLOCK0:
-		case _SLANG_BCST_USER_BLOCK1:
-		case _SLANG_BCST_USER_BLOCK2:
-		case _SLANG_BCST_USER_BLOCK3:
-		case _SLANG_BCST_USER_BLOCK4:
-		  User_Block_Ptr[addr->bc_sub_type - _SLANG_BCST_USER_BLOCK0] = addr->b.blk;
-		  break;
-
-		case _SLANG_BCST_LOOP:
-		case _SLANG_BCST_WHILE:
-		case _SLANG_BCST_FOR:
-		case _SLANG_BCST_FOREVER:
-		case _SLANG_BCST_CFOR:
-		case _SLANG_BCST_DOWHILE:
-		case _SLANG_BCST_FOREACH:
-		  if (block == NULL) block = addr;
-		  lang_do_loops(addr->bc_sub_type, block, 1 + (unsigned int) (addr - block));
-		  block = NULL;
-		  break;
-
-		case _SLANG_BCST_IFNOT:
-#if _SLANG_OPTIMIZE_FOR_SPEED
-		    {
-		       int i;
-		       
-		       if ((0 == pop_ctrl_integer (&i)) && (i == 0))
-			 inner_interp (addr->b.blk);
-		    }
-#else
-		  do_else_if (addr, NULL);
-#endif
-		  break;
-
-		case _SLANG_BCST_IF:
-#if _SLANG_OPTIMIZE_FOR_SPEED
-		    {
-		       int i;
-		       
-		       if ((0 == pop_ctrl_integer (&i)) && i)
-			 inner_interp (addr->b.blk);
-		    }
-#else
-		  do_else_if (NULL, addr);
-#endif
-		  break;
-
-		case _SLANG_BCST_NOTELSE:
-		  do_else_if (block, addr);
-		  block = NULL;
-		  break;
-
-		case _SLANG_BCST_ELSE:
-		  do_else_if (addr, block);
-		  block = NULL;
-		  break;
-
-		case _SLANG_BCST_SWITCH:
-		  if (Switch_Obj_Ptr == Switch_Obj_Max)
-		    {
-		       SLang_doerror("switch nesting too deep");
-		       break;
-		    }
-		  (void) SLang_pop (Switch_Obj_Ptr);
-		  Switch_Obj_Ptr++;
-
-		  if (block == NULL) block = addr;
-		  while ((SLang_Error == 0)
-			 && (block <= addr)
-			 && (Lang_Break_Condition == 0)
-			 && (0 == inner_interp (block->b.blk)))
-		    block++;
-		  Switch_Obj_Ptr--;
-		  SLang_free_object (Switch_Obj_Ptr);
-		  Switch_Obj_Ptr->data_type = 0;
-		  block = NULL;
-		  break;
-
-		case _SLANG_BCST_ANDELSE:
-		case _SLANG_BCST_ORELSE:
-		  if (block == NULL) block = addr;
-		  lang_do_and_orelse (addr->bc_sub_type, block, addr);
-		  block = NULL;
-		  break;
-
-		default:
-		  if (block == NULL) block =  addr;
-		  break;
-	       }
-	     if (Lang_Break_Condition) goto handle_break_condition;
-	     break;
-
-	   case _SLANG_BC_RETURN:
-	     Lang_Break_Condition = Lang_Return = Lang_Break = 1; return 1;
-	   case _SLANG_BC_BREAK:
-	     Lang_Break_Condition = Lang_Break = 1; return 1;
-	   case _SLANG_BC_CONTINUE:
-	     Lang_Break_Condition = /* Lang_Continue = */ 1; return 1;
-
-	   case _SLANG_BC_EXCH:
-	     (void) SLreverse_stack (2);
-	     break;
-
-	   case _SLANG_BC_LABEL:
-	       {
-		  int test;
-		  if ((0 == SLang_pop_integer (&test))
-		      && (test == 0))
-		    return 0;
-	       }
-	     break;
-
-	   case _SLANG_BC_LOBJPTR:
-	     (void)_SLang_push_ref (0, (VOID_STAR)(Local_Variable_Frame - addr->b.i_blk));
-	     break;
-
-	   case _SLANG_BC_GOBJPTR:
-	     (void)_SLang_push_ref (1, (VOID_STAR)addr->b.nt_blk);
-	     break;
-
-	   case _SLANG_BC_X_ERROR:
-	     if (err_block != NULL)
-	       {
-		  inner_interp(err_block->b.blk);
-		  if (SLang_Error) err_block = NULL;
-	       }
-	     else SLang_verror(SL_SYNTAX_ERROR, "No ERROR_BLOCK");
-	     if (Lang_Break_Condition) goto handle_break_condition;
-	     break;
-
-	   case _SLANG_BC_X_USER0:
-	   case _SLANG_BC_X_USER1:
-	   case _SLANG_BC_X_USER2:
-	   case _SLANG_BC_X_USER3:
-	   case _SLANG_BC_X_USER4:
-	     if (User_Block_Ptr[addr->bc_main_type - _SLANG_BC_X_USER0] != NULL)
-	       {
-		  inner_interp(User_Block_Ptr[addr->bc_main_type - _SLANG_BC_X_USER0]);
-	       }
-	     else SLang_verror(SL_SYNTAX_ERROR, "No block for X_USERBLOCK");
-	     if (Lang_Break_Condition) goto handle_break_condition;
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT:
-	     (*addr->b.call_function) ();
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT_FRAME:
-	     do_bc_call_direct_frame (addr->b.call_function);
-	     break;
-
-	   case _SLANG_BC_UNARY:
-	     do_unary (addr->b.i_blk, _SLANG_BC_UNARY);
-	     break;
-	     
-	   case _SLANG_BC_UNARY_FUNC:
-	     /* Make sure we treat these like function calls since the
-	      * parser took abs(x) to be a function call.
-	      */
-	     if (0 == _SL_increment_frame_pointer ())
-	       {
-		  do_unary (addr->b.i_blk, _SLANG_BC_UNARY);
-		  (void) _SL_decrement_frame_pointer ();
-	       }
-	     break;
-	     
-	   case _SLANG_BC_DEREF_ASSIGN:
-	     set_deref_lvalue (addr);
-	     break;
-	   case _SLANG_BC_SET_LOCAL_LVALUE:
-	     set_lvalue_obj (addr->bc_sub_type, Local_Variable_Frame - addr->b.i_blk);
-	     break;
-	   case _SLANG_BC_SET_GLOBAL_LVALUE:
-	     if (-1 == set_lvalue_obj (addr->bc_sub_type, &addr->b.nt_gvar_blk->obj))
-	       do_name_type_error (addr->b.nt_blk);
-	     break;
-	   case _SLANG_BC_SET_INTRIN_LVALUE:
-	     set_intrin_lvalue (addr);
-	     break;
-	   case _SLANG_BC_SET_STRUCT_LVALUE:
-	     set_struct_lvalue (addr);
-	     break;
-
-	   case _SLANG_BC_FIELD:
-	     (void) push_struct_field (addr->b.s_blk);
-	     break;
-
-	   case _SLANG_BC_SET_ARRAY_LVALUE:
-	     set_array_lvalue (addr->bc_sub_type);
-	     break;
-
-#if _SLANG_HAS_DEBUG_CODE
-	   case _SLANG_BC_LINE_NUM:
-	     break;
-#endif
-	     
-	   case _SLANG_BC_TMP:
-	     tmp_variable_function (addr);
-	     break;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	   case _SLANG_BC_LVARIABLE_AGET:
-	     if (0 == push_local_variable (addr->b.i_blk))
-	       do_bc_call_direct_frame (_SLarray_aget);
-	     break;
-
-	   case _SLANG_BC_LVARIABLE_APUT:
-	     if (0 == push_local_variable (addr->b.i_blk))
-	       do_bc_call_direct_frame (_SLarray_aput);
-	     break;
-	   case _SLANG_BC_INTEGER_PLUS:
-	     if (0 == SLclass_push_int_obj (addr->bc_sub_type, (int) addr->b.l_blk))
-	       do_binary (SLANG_PLUS);
-	     break;
-
-	   case _SLANG_BC_INTEGER_MINUS:
-	     if (0 == SLclass_push_int_obj (addr->bc_sub_type, (int) addr->b.l_blk))
-	       do_binary (SLANG_MINUS);
-	     break;
-#endif
-#if 0
-	   case _SLANG_BC_ARG_LVARIABLE:
-	     (void) SLang_start_arg_list ();
-	     push_local_variable (addr->b.i_blk);
-	     break;
-#endif
-	   case _SLANG_BC_EARG_LVARIABLE:
-	     push_local_variable (addr->b.i_blk);
-	     (void) SLang_end_arg_list ();
-	     break;
-
-#if USE_COMBINED_BYTECODES
-	   case _SLANG_BC_CALL_DIRECT_INTRINSIC:
-	     (*addr->b.call_function) ();
-	     addr++;
-	     execute_intrinsic_fun (addr->b.nt_ifun_blk);
-	     if (SLang_Error)
-	       do_traceback(addr->b.nt_ifun_blk->name, 0, NULL);
-	     break;
-
-	   case _SLANG_BC_INTRINSIC_CALL_DIRECT:
-	     execute_intrinsic_fun (addr->b.nt_ifun_blk);
-	     if (SLang_Error)
-	       {
-		  do_traceback(addr->b.nt_ifun_blk->name, 0, NULL);
-		  break;
-	       }
-	     addr++;
-	     (*addr->b.call_function) ();
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT_LSTR:
-	     (*addr->b.call_function) ();
-	     addr++;
-	     _SLang_dup_and_push_slstring (addr->b.s_blk);
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT_SLFUN:
-	     (*addr->b.call_function) ();
-	     addr++;
-	     execute_slang_fun (addr->b.nt_fun_blk);
-	     if (Lang_Break_Condition) goto handle_break_condition;
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT_INTRSTOP:
-	     (*addr->b.call_function) ();
-	     addr++;
-	     /* drop */
-	   case _SLANG_BC_INTRINSIC_STOP:
-	     execute_intrinsic_fun (addr->b.nt_ifun_blk);
-	     if (SLang_Error == 0)
-	       return 1;
-	     do_traceback(addr->b.nt_ifun_blk->name, 0, NULL);
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT_EARG_LVAR:
-	     (*addr->b.call_function) ();
-	     addr++;
-	     push_local_variable (addr->b.i_blk);
-	     (void) SLang_end_arg_list ();
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT_LINT:
-	     (*addr->b.call_function) ();
-	     addr++;
-	     SLclass_push_int_obj (addr->bc_sub_type, (int) addr->b.l_blk);
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT_LVAR:
-	     (*addr->b.call_function) ();
-	     addr++;
-	     push_local_variable (addr->b.i_blk);
-	     break;
-#endif				       /* USE_COMBINED_BYTECODES */
-
-	   default:
-	     SLang_verror (SL_INTERNAL_ERROR, "Byte-Code 0x%X is not valid", addr->bc_main_type);
-	  }
-
-	/* Someday I plan to add a 'signal' intrinsic function.  Then when a
-	 * signal is caught, a variable will be set to one and that value of
-	 * that variable will need to be monitored here, e.g.,
-	 * if (Handle_Signal) handle_signal ();
-	 * It would be nice to check only one variable instead of Handle_Signal
-	 * and SLang_Error.  Perhaps I should phase out SLang_Error = xxx
-	 * and used something like: SLang_set_error (code);  Then, I could
-	 * use:
-	 * if (Handle_Condition)
-	 *   {
-	 *      Handle_Condition = 0;
-	 *      if (SLang_Error) ....
-	 *      else if (Handle_Signal) handle_signal ();
-	 *      else....
-	 *   }
-	 */
-	if (SLang_Error)
-	  {
-	     if (-1 == do_inner_interp_error (err_block, addr_start, addr))
-	       return 1;
-	     if (SLang_Error)
-	       return 1;
-
-	     /* Otherwise, error cleared.  Continue onto next bytecode.
-	      * Someday I need to add something to indicate where the
-	      * next statement begins since continuing on the next
-	      * bytecode is not really what is desired.
-	      */
-	     if (Lang_Break_Condition) goto handle_break_condition;
-	  }
-	addr++;
-     }
-
-   handle_break_condition:
-   /* Get here if Lang_Break_Condition != 0, which implies that either
-    * Lang_Return, Lang_Break, or Lang_Continue is non zero
-    */
-   if (Lang_Return)
-     Lang_Break = 1;
-
-   return 1;
-}
-
-/*}}}*/
-
-/* The functions below this point are used to implement the parsed token
- * to byte-compiled code.
- */
-/* static SLang_Name_Type **Static_Hash_Table; */
-
-static SLang_Name_Type **Locals_Hash_Table;
-static int Local_Variable_Number;
-static unsigned int Function_Args_Number;
-int _SLang_Auto_Declare_Globals = 0;
-int (*SLang_Auto_Declare_Var_Hook) (char *);
-
-static SLang_NameSpace_Type *This_Static_NameSpace;
-static SLang_NameSpace_Type *Global_NameSpace;
-
-#if _SLANG_HAS_DEBUG_CODE
-static char *This_Compile_Filename;
-#endif
-static SLBlock_Type SLShort_Blocks[6];
-/* These are initialized in add_table below.  I cannot init a Union!! */
-
-static int Lang_Defining_Function;
-static void (*Default_Variable_Mode) (_SLang_Token_Type *);
-static void (*Default_Define_Function) (char *, unsigned long);
-
-static int push_compile_context (char *);
-static int pop_compile_context (void);
-
-typedef struct
-{
-   int block_type;
-   SLBlock_Type *block;		       /* beginning of block definition */
-   SLBlock_Type *block_ptr;	       /* current location */
-   SLBlock_Type *block_max;	       /* end of definition */
-   SLang_NameSpace_Type *static_namespace;
-}
-Block_Context_Type;
-
-static Block_Context_Type Block_Context_Stack [SLANG_MAX_BLOCK_STACK_LEN];
-static unsigned int Block_Context_Stack_Len;
-
-static SLBlock_Type *Compile_ByteCode_Ptr;
-static SLBlock_Type *This_Compile_Block;
-static SLBlock_Type *This_Compile_Block_Max;
-static int This_Compile_Block_Type;
-#define COMPILE_BLOCK_TYPE_FUNCTION	1
-#define COMPILE_BLOCK_TYPE_BLOCK	2
-#define COMPILE_BLOCK_TYPE_TOP_LEVEL	3
-
-/* If it returns 0, DO NOT FREE p */
-static int lang_free_branch (SLBlock_Type *p)
-{
-   /* Note: we look at 0,2,4, since these blocks are 0 terminated */
-   if ((p == SLShort_Blocks)
-       || (p == SLShort_Blocks + 2)
-       || (p == SLShort_Blocks + 4)
-       )
-     return 0;
-
-   while (1)
-     {
-	SLang_Class_Type *cl;
-
-        switch (p->bc_main_type)
-	  {
-	   case _SLANG_BC_BLOCK:
-	     if (lang_free_branch(p->b.blk))
-	       SLfree((char *)p->b.blk);
-	     break;
-
-	   case _SLANG_BC_LITERAL:
-	   case _SLANG_BC_LITERAL_STR:
-	     /* No user types should be here. */
-	     cl = _SLclass_get_class (p->bc_sub_type);
-	     (*cl->cl_byte_code_destroy) (p->bc_sub_type, (VOID_STAR) &p->b.ptr_blk);
-	     break;
-
-	   case _SLANG_BC_FIELD:
-	   case _SLANG_BC_SET_STRUCT_LVALUE:
-	     SLang_free_slstring (p->b.s_blk);
-	     break;
-
-	   default:
-	     break;
-
-	   case 0:
-	     return 1;
-	  }
-	p++;
-     }
-}
-
-static void free_function_header (_SLBlock_Header_Type *h)
-{
-   if (h->num_refs > 1)
-     {
-	h->num_refs--;
-	return;
-     }
-
-   if (h->body != NULL)
-     {
-	if (lang_free_branch (h->body))
-	  SLfree ((char *) h->body);
-     }
-
-   SLfree ((char *) h);
-}
-
-static int push_block_context (int type)
-{
-   Block_Context_Type *c;
-   unsigned int num;
-   SLBlock_Type *b;
-
-   if (Block_Context_Stack_Len == SLANG_MAX_BLOCK_STACK_LEN)
-     {
-	SLang_verror (SL_STACK_OVERFLOW, "Block stack overflow");
-	return -1;
-     }
-
-   num = 5;    /* 40 bytes */
-   if (NULL == (b = (SLBlock_Type *) SLcalloc (num, sizeof (SLBlock_Type))))
-     return -1;
-
-   c = Block_Context_Stack + Block_Context_Stack_Len;
-   c->block = This_Compile_Block;
-   c->block_ptr = Compile_ByteCode_Ptr;
-   c->block_max = This_Compile_Block_Max;
-   c->block_type = This_Compile_Block_Type;
-   c->static_namespace = This_Static_NameSpace;
-
-   Compile_ByteCode_Ptr = This_Compile_Block = b;
-   This_Compile_Block_Max = b + num;
-   This_Compile_Block_Type = type;
-
-   Block_Context_Stack_Len += 1;
-   return 0;
-}
-
-static int pop_block_context (void)
-{
-   Block_Context_Type *c;
-
-   if (Block_Context_Stack_Len == 0)
-     return -1;
-
-   Block_Context_Stack_Len -= 1;
-   c = Block_Context_Stack + Block_Context_Stack_Len;
-
-   This_Compile_Block = c->block;
-   This_Compile_Block_Max = c->block_max;
-   This_Compile_Block_Type = c->block_type;
-   Compile_ByteCode_Ptr = c->block_ptr;
-   This_Static_NameSpace = c->static_namespace;
-
-   return 0;
-}
-
-int _SLcompile_push_context (SLang_Load_Type *load_object)
-{
-   if (-1 == push_compile_context (load_object->name))
-     return -1;
-
-   if (NULL == (This_Static_NameSpace = _SLns_allocate_namespace (load_object->name, SLSTATIC_HASH_TABLE_SIZE)))
-     {
-	pop_compile_context ();
-	return -1;
-     }
-
-   if (-1 == push_block_context (COMPILE_BLOCK_TYPE_TOP_LEVEL))
-     {
-	pop_compile_context ();
-	return -1;
-     }
-
-   return 0;
-}
-
-int _SLcompile_pop_context (void)
-{
-   if (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_TOP_LEVEL)
-     {
-	Compile_ByteCode_Ptr->bc_main_type = 0;
-	if (lang_free_branch (This_Compile_Block))
-	  SLfree ((char *) This_Compile_Block);
-     }
-
-   (void) pop_block_context ();
-   (void) pop_compile_context ();
-
-   if (This_Compile_Block == NULL)
-     return 0;
-
-#if 0
-   if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_TOP_LEVEL)
-     {
-	SLang_verror (SL_INTERNAL_ERROR, "Not at top-level");
-	return -1;
-     }
-#endif
-
-   return 0;
-}
-
-/*{{{ Hash and Name Table Functions */
-
-static SLang_Name_Type *locate_name_in_table (char *name, unsigned long hash,
-					      SLang_Name_Type **table, unsigned int table_size)
-{
-   SLang_Name_Type *t;
-   char ch;
-
-   t = table [(unsigned int) (hash % table_size)];
-   ch = *name++;
-
-   while (t != NULL)
-     {
-	if ((ch == t->name[0])
-	    && (0 == strcmp (t->name + 1, name)))
-	  break;
-
-	t = t->next;
-     }
-
-   return t;
-}
-
-static SLang_Name_Type *locate_namespace_encoded_name (char *name, int err_on_bad_ns)
-{
-   char *ns, *ns1;
-   SLang_NameSpace_Type *table;
-   SLang_Name_Type *nt;
-
-   ns = name;
-   name = strchr (name, '-');
-   if ((name == NULL) || (name [1] != '>'))
-     name = ns;
-
-   ns1 = SLang_create_nslstring (ns, (unsigned int) (name - ns));
-   if (ns1 == NULL)
-     return NULL;
-   if (ns != name)
-     name += 2;
-   ns = ns1;
-
-   if (*ns == 0)
-     {
-	/* Use Global Namespace */
-	SLang_free_slstring (ns);
-	return locate_name_in_table (name, _SLcompute_string_hash (name),
-				     Global_NameSpace->table, Global_NameSpace->table_size);
-     }
-
-   if (NULL == (table = _SLns_find_namespace (ns)))
-     {
-	if (err_on_bad_ns)
-	  SLang_verror (SL_SYNTAX_ERROR, "Unable to find namespace called %s", ns);
-	SLang_free_slstring (ns);
-	return NULL;
-     }
-   SLang_free_slstring (ns);
-
-   /* FIXME: the hash table size should be stored in the hash table itself */
-   nt = locate_name_in_table (name, _SLcompute_string_hash (name),
-			      table->table, table->table_size);
-   if (nt == NULL)
-     return NULL;
-
-   switch (nt->name_type)
-     {
-	/* These are private and cannot be accessed through the namespace. */
-      case SLANG_PVARIABLE:
-      case SLANG_PFUNCTION:
-	return NULL;
-     }
-   return nt;
-}
-
-static SLang_Name_Type *locate_hashed_name (char *name, unsigned long hash)
-{
-   SLang_Name_Type *t;
-
-   if (Lang_Defining_Function)
-     {
-	t = locate_name_in_table (name, hash, Locals_Hash_Table, SLLOCALS_HASH_TABLE_SIZE);
-	if (t != NULL)
-	  return t;
-     }
-
-   if ((This_Static_NameSpace != NULL)
-       && (NULL != (t = locate_name_in_table (name, hash, This_Static_NameSpace->table, This_Static_NameSpace->table_size))))
-     return t;
-
-   t = locate_name_in_table (name, hash, Global_NameSpace->table, Global_NameSpace->table_size);
-   if (NULL != t)
-     return t;
-
-   return locate_namespace_encoded_name (name, 1);
-}
-
-SLang_Name_Type *_SLlocate_name (char *name)
-{
-   return locate_hashed_name (name, _SLcompute_string_hash (name));
-}
-
-static SLang_Name_Type *
-add_name_to_hash_table (char *name, unsigned long hash,
-			unsigned int sizeof_obj, unsigned char name_type,
-			SLang_Name_Type **table, unsigned int table_size,
-			int check_existing)
-{
-   SLang_Name_Type *t;
-
-   if (check_existing)
-     {
-	t = locate_name_in_table (name, hash, table, table_size);
-	if (t != NULL)
-	  return t;
-     }
-
-   if (-1 == _SLcheck_identifier_syntax (name))
-     return NULL;
-
-   t = (SLang_Name_Type *) SLmalloc (sizeof_obj);
-   if (t == NULL)
-     return t;
-
-   memset ((char *) t, 0, sizeof_obj);
-   if (NULL == (t->name = _SLstring_dup_hashed_string (name, hash)))
-     {
-	SLfree ((char *) t);
-	return NULL;
-     }
-   t->name_type = name_type;
-
-   hash = hash % table_size;
-   t->next = table [(unsigned int)hash];
-   table [(unsigned int) hash] = t;
-
-   return t;
-}
-
-static SLang_Name_Type *
-add_global_name (char *name, unsigned long hash,
-		 unsigned char name_type, unsigned int sizeof_obj,
-		 SLang_NameSpace_Type *ns)
-{
-   SLang_Name_Type *nt;
-   SLang_Name_Type **table;
-   unsigned int table_size;
-   
-   table = ns->table;
-   table_size = ns->table_size;
-
-   nt = locate_name_in_table (name, hash, table, table_size);
-   if (nt != NULL)
-     {
-	if (nt->name_type == name_type)
-	  return nt;
-
-	SLang_verror (SL_DUPLICATE_DEFINITION, "%s cannot be re-defined", name);
-	return NULL;
-     }
-
-   return add_name_to_hash_table (name, hash, sizeof_obj, name_type,
-				  table, table_size, 0);
-}
-
-static int add_intrinsic_function (SLang_NameSpace_Type *ns,
-				   char *name, FVOID_STAR addr, unsigned char ret_type,
-				   unsigned int nargs, va_list ap)
-{
-   SLang_Intrin_Fun_Type *f;
-   unsigned int i;
-
-   if (-1 == init_interpreter ())
-     return -1;
-   
-   if (ns == NULL) ns = Global_NameSpace;
-
-   if (nargs > SLANG_MAX_INTRIN_ARGS)
-     {
-	SLang_verror (SL_APPLICATION_ERROR, "Function %s requires too many arguments", name);
-	return -1;
-     }
-
-   if (ret_type == SLANG_FLOAT_TYPE)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED, "Function %s is not permitted to return float", name);
-	return -1;
-     }
-
-   f = (SLang_Intrin_Fun_Type *) add_global_name (name, _SLcompute_string_hash (name),
-						  SLANG_INTRINSIC, sizeof (SLang_Intrin_Fun_Type),
-						  ns);
-
-   if (f == NULL)
-     return -1;
-
-   f->i_fun = addr;
-   f->num_args = nargs;
-   f->return_type = ret_type;
-
-   for (i = 0; i < nargs; i++)
-     f->arg_types [i] = va_arg (ap, unsigned int);
-
-   return 0;
-}
-
-int SLadd_intrinsic_function (char *name, FVOID_STAR addr, unsigned char ret_type,
-			      unsigned int nargs, ...)
-{
-   va_list ap;
-   int status;
-
-   va_start (ap, nargs);
-   status = add_intrinsic_function (NULL, name, addr, ret_type, nargs, ap);
-   va_end (ap);
-
-   return status;
-}
-
-int SLns_add_intrinsic_function (SLang_NameSpace_Type *ns, 
-				 char *name, FVOID_STAR addr, unsigned char ret_type,
-				 unsigned int nargs, ...)
-{
-   va_list ap;
-   int status;
-
-   va_start (ap, nargs);
-   status = add_intrinsic_function (ns, name, addr, ret_type, nargs, ap);
-   va_end (ap);
-
-   return status;
-}
-
-int SLns_add_intrinsic_variable (SLang_NameSpace_Type *ns,
-				   char *name, VOID_STAR addr, unsigned char data_type, int ro)
-{
-   SLang_Intrin_Var_Type *v;
-
-   if (-1 == init_interpreter ())
-     return -1;
-   
-   if (ns == NULL) ns = Global_NameSpace;
-
-   v = (SLang_Intrin_Var_Type *)add_global_name (name,
-						 _SLcompute_string_hash (name),
-						 (ro ? SLANG_RVARIABLE : SLANG_IVARIABLE),
-						 sizeof (SLang_Intrin_Var_Type),
-						 ns);
-   if (v == NULL)
-     return -1;
-
-   v->addr = addr;
-   v->type = data_type;
-   return 0;
-}
-  
-int SLadd_intrinsic_variable (char *name, VOID_STAR addr, unsigned char data_type, int ro)
-{
-   return SLns_add_intrinsic_variable (NULL, name, addr, data_type, ro);
-}
-
-static int
-add_slang_function (char *name, unsigned char type, unsigned long hash,
-		    unsigned int num_args, unsigned int num_locals,
-#if _SLANG_HAS_DEBUG_CODE
-		    char *file,
-#endif
-		    _SLBlock_Header_Type *h, 
-		    SLang_NameSpace_Type *ns)
-{
-   _SLang_Function_Type *f;
-   
-#if _SLANG_HAS_DEBUG_CODE
-   if ((file != NULL)
-       && (NULL == (file = SLang_create_slstring (file))))
-     return -1;
-#endif
-
-   f = (_SLang_Function_Type *)add_global_name (name, hash,
-						type,
-						sizeof (_SLang_Function_Type),
-						ns);
-   if (f == NULL)
-     {
-#if _SLANG_HAS_DEBUG_CODE
-	SLang_free_slstring (file);    /* NULL ok */
-#endif
-	return -1;
-     }
-
-   if (f->v.header != NULL)
-     {
-	if (f->nlocals == AUTOLOAD_NUM_LOCALS)
-	  SLang_free_slstring ((char *)f->v.autoload_filename); /* autoloaded filename */
-	else
-	  free_function_header (f->v.header);
-     }
-
-#if _SLANG_HAS_DEBUG_CODE
-   if (f->file != NULL) SLang_free_slstring (f->file);
-   f->file = file;
-#endif
-   f->v.header = h;
-   f->nlocals = num_locals;
-   f->nargs = num_args;
-
-   return 0;
-}
-
-int SLang_autoload (char *name, char *file)
-{
-   _SLang_Function_Type *f;
-   unsigned long hash;
-
-   hash = _SLcompute_string_hash (name);
-   f = (_SLang_Function_Type *)locate_name_in_table (name, hash, Global_NameSpace->table, Global_NameSpace->table_size);
-
-   if ((f != NULL)
-       && (f->name_type == SLANG_FUNCTION)
-       && (f->v.header != NULL)
-       && (f->nlocals != AUTOLOAD_NUM_LOCALS))
-     {
-	/* already loaded */
-	return 0;
-     }
-
-   file = SLang_create_slstring (file);
-   if (-1 == add_slang_function (name, SLANG_FUNCTION, hash, 0, AUTOLOAD_NUM_LOCALS,
-#if _SLANG_HAS_DEBUG_CODE
-				 file,
-#endif
-				 (_SLBlock_Header_Type *) file,
-				 Global_NameSpace))
-     {
-	SLang_free_slstring (file);
-	return -1;
-     }
-
-   return 0;
-}
-
-SLang_Name_Type *_SLlocate_global_name (char *name)
-{
-   unsigned long hash;
-
-   hash = _SLcompute_string_hash (name);
-   return locate_name_in_table (name, hash, Global_NameSpace->table, 
-				Global_NameSpace->table_size);
-}
-
-/*}}}*/
-
-static void free_local_variable_table (void)
-{
-   unsigned int i;
-   SLang_Name_Type *t, *t1;
-
-   for (i = 0; i < SLLOCALS_HASH_TABLE_SIZE; i++)
-     {
-	t = Locals_Hash_Table [i];
-	while (t != NULL)
-	  {
-	     SLang_free_slstring (t->name);
-	     t1 = t->next;
-	     SLfree ((char *) t);
-	     t = t1;
-	  }
-	Locals_Hash_Table [i] = NULL;
-     }
-   Local_Variable_Number = 0;
-}
-
-/* call inner interpreter or return for more */
-static void lang_try_now(void)
-{
-   Compile_ByteCode_Ptr++;
-   if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_TOP_LEVEL)
-     return;
-
-   Compile_ByteCode_Ptr->bc_main_type = 0;  /* so next command stops after this */
-
-   /* now do it */
-   inner_interp (This_Compile_Block);
-   (void) lang_free_branch (This_Compile_Block);
-   Compile_ByteCode_Ptr = This_Compile_Block;
-}
-
-SLang_Name_Type *SLang_get_fun_from_ref (SLang_Ref_Type *ref)
-{
-   if (ref->is_global)
-     {
-	SLang_Name_Type *nt = ref->v.nt;
-
-	switch (nt->name_type)
-	  {
-	   case SLANG_PFUNCTION:
-	   case SLANG_FUNCTION:
-	   case SLANG_INTRINSIC:
-	   case SLANG_MATH_UNARY:
-	   case SLANG_APP_UNARY:
-	     return nt;
-	  }
-	SLang_verror (SL_TYPE_MISMATCH,
-		      "Reference to a function expected.  Found &%s", 
-		      nt->name);
-     }
-
-   SLang_verror (SL_TYPE_MISMATCH,
-		 "Reference to a function expected");
-   return NULL;
-}
-
-int SLexecute_function (SLang_Name_Type *nt)
-{
-   unsigned char type;
-   char *name;
-
-   if (SLang_Error)
-     return -1;
-
-   type = nt->name_type;
-   name = nt->name;
-
-   switch (type)
-     {
-      case SLANG_PFUNCTION:
-      case SLANG_FUNCTION:
-	execute_slang_fun ((_SLang_Function_Type *) nt);
-	break;
-
-      case SLANG_INTRINSIC:
-	execute_intrinsic_fun ((SLang_Intrin_Fun_Type *) nt);
-	break;
-
-      case SLANG_MATH_UNARY:
-      case SLANG_APP_UNARY:
-	inner_interp_nametype (nt);
-	break;
-
-      default:
-	SLang_verror (SL_TYPE_MISMATCH, "%s is not a function", name);
-	return -1;
-     }
-
-   if (SLang_Error)
-     {
-	SLang_verror (SLang_Error, "Error while executing %s", name);
-	return -1;
-     }
-
-   return 1;
-}
-
-int SLang_execute_function (char *name)
-{
-   SLang_Name_Type *entry;
-
-   if (NULL == (entry = SLang_get_function (name)))
-     return 0;
-
-   return SLexecute_function (entry);
-}
-
-/* return S-Lang function or NULL */
-SLang_Name_Type *SLang_get_function (char *name)
-{
-   SLang_Name_Type *entry;
-
-   if (NULL == (entry = locate_namespace_encoded_name (name, 0)))
-     return NULL;
-
-   if ((entry->name_type == SLANG_FUNCTION)
-       || (entry->name_type == SLANG_INTRINSIC))
-     return entry;
-
-   return NULL;
-}
-
-static void lang_begin_function (void)
-{
-   if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_TOP_LEVEL)
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Function nesting is illegal");
-	return;
-     }
-   Lang_Defining_Function = 1;
-   (void) push_block_context (COMPILE_BLOCK_TYPE_FUNCTION);
-}
-
-#if USE_COMBINED_BYTECODES
-static void optimize_block (SLBlock_Type *b)
-{
-   while (1)
-     {
-	switch (b->bc_main_type)
-	  {
-	   case 0:
-	     return;
-	     
-	   default:
-	     b++;
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT:
-	     b++;
-	     switch (b->bc_main_type)
-	       {
-		case 0:
-		  return;
-		case _SLANG_BC_INTRINSIC:
-		  if ((b+1)->bc_main_type == 0)
-		    {
-		       (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_INTRSTOP;
-		       return;
-		    }
-		  (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_INTRINSIC;
-		  b++;
-		  break;
-		case _SLANG_BC_LITERAL_STR:
-		  (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_LSTR;
-		  b++;
-		  break;
-		case _SLANG_BC_FUNCTION:
-		case _SLANG_BC_PFUNCTION:
-		  (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_SLFUN;
-		  b++;
-		  break;
-		case _SLANG_BC_EARG_LVARIABLE:
-		  (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_EARG_LVAR;
-		  b++;
-		  break;
-		case _SLANG_BC_LITERAL_INT:
-		  (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_LINT;
-		  b++;
-		  break;
-		case _SLANG_BC_LVARIABLE:
-		  (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_LVAR;
-		  b++;
-		  break;
-	       }
-	     break;
-	     
-	   case _SLANG_BC_INTRINSIC:
-	     b++;
-	     switch (b->bc_main_type)
-	       {
-		case _SLANG_BC_CALL_DIRECT:
-		  (b-1)->bc_main_type = _SLANG_BC_INTRINSIC_CALL_DIRECT;
-		  b++;
-		  break;
-#if 0
-		case _SLANG_BC_BLOCK:
-		  (b-1)->bc_main_type = _SLANG_BC_INTRINSIC_BLOCK;
-		  b++;
-		  break;
-#endif
-
-		case 0:
-		  (b-1)->bc_main_type = _SLANG_BC_INTRINSIC_STOP;
-		  return;
-	       }	     
-	     break;
-	  }
-     }
-}
-
-#endif
-
-
-/* name will be NULL if the object is to simply terminate the function
- * definition.  See SLang_restart.
- */
-static int lang_define_function (char *name, unsigned char type, unsigned long hash,
-				 SLang_NameSpace_Type *ns)
-{
-   if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_FUNCTION)
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Premature end of function");
-	return -1;
-     }
-
-   /* terminate function */
-   Compile_ByteCode_Ptr->bc_main_type = 0;
-
-   if (name != NULL)
-     {
-	_SLBlock_Header_Type *h;
-
-	h = (_SLBlock_Header_Type *)SLmalloc (sizeof (_SLBlock_Header_Type));
-	if (h != NULL)
-	  {
-	     h->num_refs = 1;
-	     h->body = This_Compile_Block;
-	     
-#if USE_COMBINED_BYTECODES
-	     optimize_block (h->body);
-#endif
-
-	     if (-1 == add_slang_function (name, type, hash,
-					   Function_Args_Number,
-					   Local_Variable_Number,
-#if _SLANG_HAS_DEBUG_CODE
-					   This_Compile_Filename,
-#endif
-					   h, ns))
-	       SLfree ((char *) h);
-	  }
-	/* Drop through for clean-up */
-     }
-
-   free_local_variable_table ();
-
-   Function_Args_Number = 0;
-   Lang_Defining_Function = 0;
-
-   if (SLang_Error) return -1;
-   /* SLang_restart will finish this if there is a slang error. */
-
-   pop_block_context ();
-
-   /* A function is only defined at top-level */
-   if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_TOP_LEVEL)
-     {
-	SLang_verror (SL_INTERNAL_ERROR, "Not at top-level");
-	return -1;
-     }
-   Compile_ByteCode_Ptr = This_Compile_Block;
-   return 0;
-}
-
-static void define_static_function (char *name, unsigned long hash)
-{
-   (void) lang_define_function (name, SLANG_FUNCTION, hash, This_Static_NameSpace);
-}
-
-static void define_private_function (char *name, unsigned long hash)
-{
-   (void) lang_define_function (name, SLANG_PFUNCTION, hash, This_Static_NameSpace);
-}
-
-static void define_public_function (char *name, unsigned long hash)
-{
-   (void) lang_define_function (name, SLANG_FUNCTION, hash, Global_NameSpace);
-}
-
-static void lang_end_block (void)
-{
-   SLBlock_Type *node, *branch;
-   unsigned char mtype;
-
-   if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_BLOCK)
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Not defining a block");
-	return;
-     }
-
-   /* terminate the block */
-   Compile_ByteCode_Ptr->bc_main_type = 0;
-   branch = This_Compile_Block;
-
-   /* Try to save some space by using the cached blocks. */
-   if (Compile_ByteCode_Ptr == branch + 1)
-     {
-	mtype = branch->bc_main_type;
-	if (((mtype == _SLANG_BC_BREAK)
-	     || (mtype == _SLANG_BC_CONTINUE)
-	     || (mtype == _SLANG_BC_RETURN))
-	    && (SLang_Error == 0))
-	  {
-	     SLfree ((char *)branch);
-	     branch = SLShort_Blocks + 2 * (int) (mtype - _SLANG_BC_RETURN);
-	  }
-     }
-
-#if USE_COMBINED_BYTECODES
-   optimize_block (branch);
-#endif
-
-   pop_block_context ();
-   node = Compile_ByteCode_Ptr++;
-
-   node->bc_main_type = _SLANG_BC_BLOCK;
-   node->bc_sub_type = 0;
-   node->b.blk = branch;
-}
-
-static int lang_begin_block (void)
-{
-   return push_block_context (COMPILE_BLOCK_TYPE_BLOCK);
-}
-
-static int lang_check_space (void)
-{
-   unsigned int n;
-   SLBlock_Type *p;
-
-   if (NULL == (p = This_Compile_Block))
-     {
-	SLang_verror (SL_INTERNAL_ERROR, "Top-level block not present");
-	return -1;
-     }
-
-   /* Allow 1 extra for terminator */
-   if (Compile_ByteCode_Ptr + 1 < This_Compile_Block_Max)
-     return 0;
-
-   n = (unsigned int) (This_Compile_Block_Max - p);
-
-   /* enlarge the space by 2 objects */
-   n += 2;
-
-   if (NULL == (p = (SLBlock_Type *) SLrealloc((char *)p, n * sizeof(SLBlock_Type))))
-     return -1;
-
-   This_Compile_Block_Max = p + n;
-   n = (unsigned int) (Compile_ByteCode_Ptr - This_Compile_Block);
-   This_Compile_Block = p;
-   Compile_ByteCode_Ptr = p + n;
-
-   return 0;
-}
-
-/* returns positive number if name is a function or negative number if it
- is a variable.  If it is intrinsic, it returns magnitude of 1, else 2 */
-int SLang_is_defined(char *name)
-{
-   SLang_Name_Type *t;
-
-   if (-1 == init_interpreter ())
-     return -1;
-
-   t = locate_namespace_encoded_name (name, 0);
-   if (t == NULL)
-     return 0;
-
-   switch (t->name_type)
-     {
-      case SLANG_FUNCTION:
-      /* case SLANG_PFUNCTION: */
-	return 2;
-      case SLANG_GVARIABLE:
-      /* case SLANG_PVARIABLE: */
-	return -2;
-
-      case SLANG_ICONSTANT:
-      case SLANG_DCONSTANT:
-      case SLANG_RVARIABLE:
-      case SLANG_IVARIABLE:
-	return -1;
-
-      case SLANG_INTRINSIC:
-      default:
-	return 1;
-     }
-}
-
-static int add_global_variable (char *name, char name_type, unsigned long hash,
-				SLang_NameSpace_Type *ns)
-{
-   SLang_Name_Type *g;
-
-   /* Note the importance of checking if it is already defined or not.  For example,
-    * suppose X is defined as an intrinsic variable.  Then S-Lang code like:
-    * !if (is_defined("X")) { variable X; }
-    * will not result in a global variable X.  On the other hand, this would
-    * not be an issue if 'variable' statements always were not processed
-    * immediately.  That is, as it is now, 'if (0) {variable ZZZZ;}' will result
-    * in the variable ZZZZ being defined because of the immediate processing.
-    * The current solution is to do: if (0) { eval("variable ZZZZ;"); }
-    */
-   /* hash = _SLcompute_string_hash (name); */
-   g = locate_name_in_table (name, hash, ns->table, ns->table_size);
-
-   if (g != NULL)
-     {
-	if (g->name_type == name_type)
-	  return 0;
-     }
-
-   if (NULL == add_global_name (name, hash, name_type,
-				sizeof (SLang_Global_Var_Type), ns))
-     return -1;
-
-   return 0;
-}
-
-int SLadd_global_variable (char *name)
-{
-   if (-1 == init_interpreter ())
-     return -1;
-
-   return add_global_variable (name, SLANG_GVARIABLE,
-			       _SLcompute_string_hash (name),
-			       Global_NameSpace);
-}
-
-static int add_local_variable (char *name, unsigned long hash)
-{
-   SLang_Local_Var_Type *t;
-
-   /* local variable */
-   if (Local_Variable_Number >= SLANG_MAX_LOCAL_VARIABLES)
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Too many local variables");
-	return -1;
-     }
-
-   if (NULL != locate_name_in_table (name, hash, Locals_Hash_Table, SLLOCALS_HASH_TABLE_SIZE))
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Local variable %s has already been defined", name);
-	return -1;
-     }
-
-   t = (SLang_Local_Var_Type *)
-     add_name_to_hash_table (name, hash,
-			     sizeof (SLang_Local_Var_Type), SLANG_LVARIABLE,
-			     Locals_Hash_Table, SLLOCALS_HASH_TABLE_SIZE, 0);
-   if (t == NULL)
-     return -1;
-
-   t->local_var_number = Local_Variable_Number;
-   Local_Variable_Number++;
-   return 0;
-}
-
-static void (*Compile_Mode_Function) (_SLang_Token_Type *);
-static void compile_basic_token_mode (_SLang_Token_Type *);
-
-/* if an error occurs, discard current object, block, function, etc... */
-void SLang_restart (int localv)
-{
-   int save = SLang_Error;
-
-   SLang_Error = SL_UNKNOWN_ERROR;
-
-   _SLcompile_ptr = _SLcompile;
-   Compile_Mode_Function = compile_basic_token_mode;
-
-   Lang_Break = /* Lang_Continue = */ Lang_Return = 0;
-   Trace_Mode = 0;
-
-   while (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_BLOCK)
-     lang_end_block();
-
-   if (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_FUNCTION)
-     {
-	/* Terminate function definition and free variables */
-	lang_define_function (NULL, SLANG_FUNCTION, 0, Global_NameSpace);
-	if (lang_free_branch (This_Compile_Block))
-	  SLfree((char *)This_Compile_Block);
-     }
-   Lang_Defining_Function = 0;
-
-   SLang_Error = save;
-
-   if (SLang_Error == SL_STACK_OVERFLOW)
-     {
-	/* This loop guarantees that the stack is properly cleaned. */
-	while (_SLStack_Pointer != _SLRun_Stack)
-	  {
-	     SLdo_pop ();
-	  }
-     }
-
-   while ((This_Compile_Block_Type != COMPILE_BLOCK_TYPE_TOP_LEVEL)
-	  && (0 == pop_block_context ()))
-     ;
-
-   if (localv)
-     {
-	Next_Function_Num_Args = SLang_Num_Function_Args = 0;
-	Local_Variable_Frame = Local_Variable_Stack;
-	Recursion_Depth = 0;
-	Frame_Pointer = _SLStack_Pointer;
-	Frame_Pointer_Depth = 0;
-	Switch_Obj_Ptr = Switch_Objects;
-	while (Switch_Obj_Ptr < Switch_Obj_Max)
-	  {
-	     SLang_free_object (Switch_Obj_Ptr);
-	     Switch_Obj_Ptr++;
-	  }
-	Switch_Obj_Ptr = Switch_Objects;
-     }
-}
-
-static void compile_directive (unsigned char sub_type)
-{
-   /* This function is called only from compile_directive_mode which is
-    * only possible when a block is available.
-    */
-
-   /* use BLOCK */
-   Compile_ByteCode_Ptr--;
-   Compile_ByteCode_Ptr->bc_sub_type = sub_type;
-
-   lang_try_now ();
-}
-
-static void compile_unary (int op, unsigned char mt)
-{
-   Compile_ByteCode_Ptr->bc_main_type = mt;
-   Compile_ByteCode_Ptr->b.i_blk = op;
-   Compile_ByteCode_Ptr->bc_sub_type = 0;
-
-   lang_try_now ();
-}
-
-
-static void compile_binary (int op)
-{
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_BINARY;
-   Compile_ByteCode_Ptr->b.i_blk = op;
-   Compile_ByteCode_Ptr->bc_sub_type = 0;
-
-   lang_try_now ();
-}
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-static int try_compressed_bytecode (unsigned char last_bc, unsigned char bc)
-{
-   if (Compile_ByteCode_Ptr != This_Compile_Block)
-     {
-	SLBlock_Type *b;
-	b = Compile_ByteCode_Ptr - 1;
-	if (b->bc_main_type == last_bc)
-	  {
-	     Compile_ByteCode_Ptr = b;
-	     b->bc_main_type = bc;
-	     lang_try_now ();
-	     return 0;
-	  }
-     }
-   return -1;
-}
-#endif
-
-static void compile_fast_binary (int op, unsigned char bc)
-{
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (0 == try_compressed_bytecode (_SLANG_BC_LITERAL_INT, bc))
-     return;
-#else
-   (void) bc;
-#endif
-   compile_binary (op);
-}
-
-/* This is a hack */
-typedef struct _Special_NameTable_Type
-{
-   char *name;
-   int (*fun) (struct _Special_NameTable_Type *, _SLang_Token_Type *);
-   VOID_STAR blk_data;
-   unsigned char main_type;
-}
-Special_NameTable_Type;
-
-static int handle_special (Special_NameTable_Type *nt, _SLang_Token_Type *tok)
-{
-   (void) tok;
-   Compile_ByteCode_Ptr->bc_main_type = nt->main_type;
-   Compile_ByteCode_Ptr->b.ptr_blk = nt->blk_data;
-   return 0;
-}
-
-static int handle_special_file (Special_NameTable_Type *nt, _SLang_Token_Type *tok)
-{
-   char *name;
-
-   (void) nt; (void) tok;
-
-   if (This_Static_NameSpace == NULL) name = "***Unknown***";
-   else
-     name = This_Static_NameSpace->name;
-
-   name = SLang_create_slstring (name);
-   if (name == NULL)
-     return -1;
-
-   Compile_ByteCode_Ptr->b.s_blk = name;
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL_STR;
-   Compile_ByteCode_Ptr->bc_sub_type = SLANG_STRING_TYPE;
-   return 0;
-}
-
-static int handle_special_line (Special_NameTable_Type *nt, _SLang_Token_Type *tok)
-{
-   (void) nt;
-
-#if _SLANG_HAS_DEBUG_CODE
-   Compile_ByteCode_Ptr->b.l_blk = (long) tok->line_number;
-#endif
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL;
-   Compile_ByteCode_Ptr->bc_sub_type = SLANG_UINT_TYPE;
-
-   return 0;
-}
-
-static Special_NameTable_Type Special_Name_Table [] =
-{
-     {"EXECUTE_ERROR_BLOCK", handle_special, NULL, _SLANG_BC_X_ERROR},
-     {"X_USER_BLOCK0", handle_special, NULL, _SLANG_BC_X_USER0},
-     {"X_USER_BLOCK1", handle_special, NULL, _SLANG_BC_X_USER1},
-     {"X_USER_BLOCK2", handle_special, NULL, _SLANG_BC_X_USER2},
-     {"X_USER_BLOCK3", handle_special, NULL, _SLANG_BC_X_USER3},
-     {"X_USER_BLOCK4", handle_special, NULL, _SLANG_BC_X_USER4},
-     {"__FILE__", handle_special_file, NULL, 0},
-     {"__LINE__", handle_special_line, NULL, 0},
-#if 0
-     {"__NAMESPACE__", handle_special_namespace, NULL, 0},
-#endif
-     {NULL, NULL, NULL, 0}
-};
-
-static void compile_hashed_identifier (char *name, unsigned long hash, _SLang_Token_Type *tok)
-{
-   SLang_Name_Type *entry;
-   unsigned char name_type;
-
-   entry = locate_hashed_name (name, hash);
-
-   if (entry == NULL)
-     {
-	Special_NameTable_Type *nt = Special_Name_Table;
-
-	while (nt->name != NULL)
-	  {
-	     if (strcmp (name, nt->name))
-	       {
-		  nt++;
-		  continue;
-	       }
-
-	     if (0 == (*nt->fun)(nt, tok))
-	       lang_try_now ();
-	     return;
-	  }
-
-	SLang_verror (SL_UNDEFINED_NAME, "%s is undefined", name);
-	return;
-     }
-
-   name_type = entry->name_type;
-   Compile_ByteCode_Ptr->bc_main_type = name_type;
-
-   if (name_type == SLANG_LVARIABLE)
-     Compile_ByteCode_Ptr->b.i_blk = ((SLang_Local_Var_Type *) entry)->local_var_number;
-   else
-     Compile_ByteCode_Ptr->b.nt_blk = entry;
-
-   lang_try_now ();
-}
-
-static void compile_tmp_variable (char *name, unsigned long hash)
-{
-   SLang_Name_Type *entry;
-   unsigned char name_type;
-
-   if (NULL == (entry = locate_hashed_name (name, hash)))
-     {
-	SLang_verror (SL_UNDEFINED_NAME, "%s is undefined", name);
-	return;
-     }
-
-   name_type = entry->name_type;
-   switch (name_type)
-     {
-      case SLANG_LVARIABLE:
-	Compile_ByteCode_Ptr->b.i_blk = ((SLang_Local_Var_Type *) entry)->local_var_number;
-	break;
-
-      case SLANG_GVARIABLE:
-      case SLANG_PVARIABLE:
-	Compile_ByteCode_Ptr->b.nt_blk = entry;
-	break;
-
-      default:
-	SLang_verror (SL_SYNTAX_ERROR, "__tmp(%s) does not specifiy a variable", name);
-	return;
-     }
-
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_TMP;
-   Compile_ByteCode_Ptr->bc_sub_type = name_type;
-
-   lang_try_now ();
-}
-
-static void compile_simple (unsigned char main_type)
-{
-   Compile_ByteCode_Ptr->bc_main_type = main_type;
-   Compile_ByteCode_Ptr->bc_sub_type = 0;
-   Compile_ByteCode_Ptr->b.blk = NULL;
-   lang_try_now ();
-}
-
-static void compile_identifier (char *name, _SLang_Token_Type *tok)
-{
-   compile_hashed_identifier (name, _SLcompute_string_hash (name), tok);
-}
-
-static void compile_call_direct (int (*f) (void), unsigned char byte_code)
-{
-   Compile_ByteCode_Ptr->b.call_function = f;
-   Compile_ByteCode_Ptr->bc_main_type = byte_code;
-   Compile_ByteCode_Ptr->bc_sub_type = 0;
-   lang_try_now ();
-}
-
-static void compile_lvar_call_direct (int (*f)(void), unsigned char bc,
-				      unsigned char frame_op)
-{
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (0 == try_compressed_bytecode (_SLANG_BC_LVARIABLE, bc))
-     return;
-#else
-   (void) bc;
-#endif
-
-   compile_call_direct (f, frame_op);
-}
-
-static void compile_integer (long i, unsigned char bc_main_type, unsigned char bc_sub_type)
-{
-   Compile_ByteCode_Ptr->b.l_blk = i;
-   Compile_ByteCode_Ptr->bc_main_type = bc_main_type;
-   Compile_ByteCode_Ptr->bc_sub_type = bc_sub_type;
-
-   lang_try_now ();
-}
-
-#if SLANG_HAS_FLOAT
-static void compile_double (char *str, unsigned char type)
-{
-   double d;
-   unsigned int factor = 1;
-   double *ptr;
-
-#if 1
-   d = _SLang_atof (str);
-#else
-   if (1 != sscanf (str, "%lf", &d))
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Unable to convert %s to double", str);
-	return;
-     }
-#endif
-
-#if SLANG_HAS_COMPLEX
-   if (type == SLANG_COMPLEX_TYPE) factor = 2;
-#endif
-   if (NULL == (ptr = (double *) SLmalloc(factor * sizeof(double))))
-     return;
-
-   Compile_ByteCode_Ptr->b.double_blk = ptr;
-#if SLANG_HAS_COMPLEX
-   if (type == SLANG_COMPLEX_TYPE)
-     *ptr++ = 0;
-#endif
-   *ptr = d;
-
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL;
-   Compile_ByteCode_Ptr->bc_sub_type = type;
-   lang_try_now ();
-}
-
-static void compile_float (char *s)
-{
-   float x;
-
-#if 1
-   x = (float) _SLang_atof (s);
-#else
-   if (1 != sscanf (s, "%f", &x))
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Unable to convert %s to float", s);
-	return;
-     }
-#endif
-   Compile_ByteCode_Ptr->b.float_blk = x;
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL;
-   Compile_ByteCode_Ptr->bc_sub_type = SLANG_FLOAT_TYPE;
-   lang_try_now ();
-}
-
-#endif
-
-static void compile_string (char *s, unsigned long hash)
-{
-   if (NULL == (Compile_ByteCode_Ptr->b.s_blk = _SLstring_dup_hashed_string (s, hash)))
-     return;
-
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL_STR;
-   Compile_ByteCode_Ptr->bc_sub_type = SLANG_STRING_TYPE;
-
-   lang_try_now ();
-}
-
-static void compile_bstring (SLang_BString_Type *s)
-{
-   if (NULL == (Compile_ByteCode_Ptr->b.bs_blk = SLbstring_dup (s)))
-     return;
-
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL;
-   Compile_ByteCode_Ptr->bc_sub_type = SLANG_BSTRING_TYPE;
-
-   lang_try_now ();
-}
-
-/* assign_type is one of _SLANG_BCST_ASSIGN, ... values */
-static void compile_assign (unsigned char assign_type,
-			    char *name, unsigned long hash)
-{
-   SLang_Name_Type *v;
-   unsigned char main_type;
-   SLang_Class_Type *cl;
-
-   v = locate_hashed_name (name, hash);
-   if (v == NULL)
-     {
-	if ((_SLang_Auto_Declare_Globals == 0)
-	    || (NULL != strchr (name, '-'))   /* namespace->name form */
-	    || Lang_Defining_Function
-	    || (assign_type != _SLANG_BCST_ASSIGN)
-	    || (This_Static_NameSpace == NULL))
-	  {
-	     SLang_verror (SL_UNDEFINED_NAME, "%s is undefined", name);
-	     return;
-	  }
-	/* Note that function local variables are not at top level */
-
-	/* Variables that are automatically declared are given static
-	 * scope.
-	 */
-	if ((NULL != SLang_Auto_Declare_Var_Hook)
-	    && (-1 == (*SLang_Auto_Declare_Var_Hook) (name)))
-	  return;
-
-	if ((-1 == add_global_variable (name, SLANG_GVARIABLE, hash, This_Static_NameSpace))
-	    || (NULL == (v = locate_hashed_name (name, hash))))
-	  return;
-     }
-
-   switch (v->name_type)
-     {
-      case SLANG_LVARIABLE:
-	main_type = _SLANG_BC_SET_LOCAL_LVALUE;
-	Compile_ByteCode_Ptr->b.i_blk = ((SLang_Local_Var_Type *) v)->local_var_number;
-	break;
-
-      case SLANG_GVARIABLE:
-      case SLANG_PVARIABLE:
-	main_type = _SLANG_BC_SET_GLOBAL_LVALUE;
-	Compile_ByteCode_Ptr->b.nt_blk = v;
-	break;
-
-      case SLANG_IVARIABLE:
-	cl = _SLclass_get_class (((SLang_Intrin_Var_Type *)v)->type);
-	if (cl->cl_class_type != SLANG_CLASS_TYPE_SCALAR)
-	  {
-	     SLang_verror (SL_SYNTAX_ERROR, "Assignment to %s is not allowed", name);
-	     return;
-	  }
-	main_type = _SLANG_BC_SET_INTRIN_LVALUE;
-	Compile_ByteCode_Ptr->b.nt_blk = v;
-	break;
-
-      case SLANG_RVARIABLE:
-	SLang_verror (SL_READONLY_ERROR, "%s is read-only", name);
-	return;
-
-      default:
-	SLang_verror (SL_DUPLICATE_DEFINITION, "%s may not be used as an lvalue", name);
-	return;
-     }
-
-   Compile_ByteCode_Ptr->bc_sub_type = assign_type;
-   Compile_ByteCode_Ptr->bc_main_type = main_type;
-
-   lang_try_now ();
-}
-
-static void compile_deref_assign (char *name, unsigned long hash)
-{
-   SLang_Name_Type *v;
-
-   v = locate_hashed_name (name, hash);
-
-   if (v == NULL)
-     {
-	SLang_verror (SL_UNDEFINED_NAME, "%s is undefined", name);
-	return;
-     }
-
-   switch (v->name_type)
-     {
-      case SLANG_LVARIABLE:
-	Compile_ByteCode_Ptr->b.i_blk = ((SLang_Local_Var_Type *) v)->local_var_number;
-	break;
-
-      case SLANG_GVARIABLE:
-      case SLANG_PVARIABLE:
-	Compile_ByteCode_Ptr->b.nt_blk = v;
-	break;
-
-      default:
-	/* FIXME: Priority=low
-	 * This could be made to work.  It is not a priority because
-	 * I cannot imagine application intrinsics which are references.
-	 */
-	SLang_verror (SL_NOT_IMPLEMENTED, "Deref assignment to %s is not allowed", name);
-	return;
-     }
-
-   Compile_ByteCode_Ptr->bc_sub_type = v->name_type;
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_DEREF_ASSIGN;
-
-   lang_try_now ();
-}
-
-static void
-compile_struct_assign (_SLang_Token_Type *t)
-{
-   Compile_ByteCode_Ptr->bc_sub_type = _SLANG_BCST_ASSIGN + (t->type - _STRUCT_ASSIGN_TOKEN);
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_SET_STRUCT_LVALUE;
-   Compile_ByteCode_Ptr->b.s_blk = _SLstring_dup_hashed_string (t->v.s_val, t->hash);
-   lang_try_now ();
-}
-
-static void
-compile_array_assign (_SLang_Token_Type *t)
-{
-   Compile_ByteCode_Ptr->bc_sub_type = _SLANG_BCST_ASSIGN + (t->type - _ARRAY_ASSIGN_TOKEN);
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_SET_ARRAY_LVALUE;
-   Compile_ByteCode_Ptr->b.s_blk = NULL;
-   lang_try_now ();
-}
-
-static void compile_dot(_SLang_Token_Type *t)
-{
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_FIELD;
-   Compile_ByteCode_Ptr->b.s_blk = _SLstring_dup_hashed_string(t->v.s_val, t->hash);
-   lang_try_now ();
-}
-
-static void compile_ref (char *name, unsigned long hash)
-{
-   SLang_Name_Type *entry;
-   unsigned char main_type;
-
-   if (NULL == (entry = locate_hashed_name (name, hash)))
-     {
-	SLang_verror (SL_UNDEFINED_NAME, "%s is undefined", name);
-	return;
-     }
-
-   main_type = entry->name_type;
-
-   if (main_type == SLANG_LVARIABLE)
-     {
-	main_type = _SLANG_BC_LOBJPTR;
-	Compile_ByteCode_Ptr->b.i_blk = ((SLang_Local_Var_Type *)entry)->local_var_number;
-     }
-   else
-     {
-	main_type = _SLANG_BC_GOBJPTR;
-	Compile_ByteCode_Ptr->b.nt_blk = entry;
-     }
-
-   Compile_ByteCode_Ptr->bc_main_type = main_type;
-   lang_try_now ();
-}
-
-static void compile_break (unsigned char break_type,
-			   int requires_block, int requires_fun,
-			   char *str)
-{
-   if ((requires_fun
-	&& (Lang_Defining_Function == 0))
-       || (requires_block
-	   && (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_BLOCK)))
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "misplaced %s", str);
-	return;
-     }
-
-   Compile_ByteCode_Ptr->bc_main_type = break_type;
-   Compile_ByteCode_Ptr->bc_sub_type = 0;
-
-   lang_try_now ();
-}
-
-static void compile_public_variable_mode (_SLang_Token_Type *t)
-{
-   if (t->type == IDENT_TOKEN)
-     {
-	/* If the variable is already defined in the static hash table,
-	 * generate an error.
-	 */
-	if ((This_Static_NameSpace != NULL)
-	    && (NULL != locate_name_in_table (t->v.s_val, t->hash, This_Static_NameSpace->table, This_Static_NameSpace->table_size)))
-	  {
-	     SLang_verror (SL_DUPLICATE_DEFINITION,
-			   "%s already has static or private linkage in this unit",
-			   t->v.s_val);
-	     return;
-	  }
-	add_global_variable (t->v.s_val, SLANG_GVARIABLE, t->hash, Global_NameSpace);
-     }
-   else if (t->type == CBRACKET_TOKEN)
-     Compile_Mode_Function = compile_basic_token_mode;
-   else
-     SLang_verror (SL_SYNTAX_ERROR, "Misplaced token in variable list");
-}
-
-static void compile_local_variable_mode (_SLang_Token_Type *t)
-{
-   if (t->type == IDENT_TOKEN)
-     add_local_variable (t->v.s_val, t->hash);
-   else if (t->type == CBRACKET_TOKEN)
-     Compile_Mode_Function = compile_basic_token_mode;
-   else
-     SLang_verror (SL_SYNTAX_ERROR, "Misplaced token in variable list");
-}
-
-static void compile_static_variable_mode (_SLang_Token_Type *t)
-{
-   if (t->type == IDENT_TOKEN)
-     add_global_variable (t->v.s_val, SLANG_GVARIABLE, t->hash, This_Static_NameSpace);
-   else if (t->type == CBRACKET_TOKEN)
-     Compile_Mode_Function = compile_basic_token_mode;
-   else
-     SLang_verror (SL_SYNTAX_ERROR, "Misplaced token in variable list");
-}
-
-static void compile_private_variable_mode (_SLang_Token_Type *t)
-{
-   if (t->type == IDENT_TOKEN)
-     add_global_variable (t->v.s_val, SLANG_PVARIABLE, t->hash, This_Static_NameSpace);
-   else if (t->type == CBRACKET_TOKEN)
-     Compile_Mode_Function = compile_basic_token_mode;
-   else
-     SLang_verror (SL_SYNTAX_ERROR, "Misplaced token in variable list");
-}
-
-static void compile_function_mode (_SLang_Token_Type *t)
-{
-   if (-1 == lang_check_space ())
-     return;
-
-   if (t->type != IDENT_TOKEN)
-     SLang_verror (SL_SYNTAX_ERROR, "Expecting function name");
-   else
-     lang_define_function (t->v.s_val, SLANG_FUNCTION, t->hash, Global_NameSpace);
-
-   Compile_Mode_Function = compile_basic_token_mode;
-}
-
-/* An error block is not permitted to contain continue or break statements.
- * This restriction may be removed later but for now reject them.
- */
-static int check_error_block (void)
-{
-   SLBlock_Type *p;
-   unsigned char t;
-
-   /* Back up to the block and then scan it. */
-   p = (Compile_ByteCode_Ptr - 1)->b.blk;
-
-   while (0 != (t = p->bc_main_type))
-     {
-	if ((t == _SLANG_BC_BREAK)
-	    || (t == _SLANG_BC_CONTINUE))
-	  {
-	     SLang_verror (SL_SYNTAX_ERROR,
-			   "An ERROR_BLOCK is not permitted to contain continue or break statements");
-	     return -1;
-	  }
-	p++;
-     }
-   return 0;
-}
-
-/* The only allowed tokens are the directives and another block start.
- * The mode is only active if a block is available.  The inner_interp routine
- * expects such safety checks.
- */
-static void compile_directive_mode (_SLang_Token_Type *t)
-{
-   int bc_sub_type;
-
-   if (-1 == lang_check_space ())
-     return;
-
-   bc_sub_type = -1;
-
-   switch (t->type)
-     {
-      case FOREVER_TOKEN:
-	bc_sub_type = _SLANG_BCST_FOREVER;
-	break;
-
-      case IFNOT_TOKEN:
-	bc_sub_type = _SLANG_BCST_IFNOT;
-	break;
-
-      case IF_TOKEN:
-	bc_sub_type = _SLANG_BCST_IF;
-	break;
-
-      case ANDELSE_TOKEN:
-	bc_sub_type = _SLANG_BCST_ANDELSE;
-	break;
-
-      case SWITCH_TOKEN:
-	bc_sub_type = _SLANG_BCST_SWITCH;
-	break;
-
-      case EXITBLK_TOKEN:
-	if (Lang_Defining_Function == 0)
-	  {
-	     SLang_verror (SL_SYNTAX_ERROR, "misplaced EXIT_BLOCK");
-	     break;
-	  }
-	bc_sub_type = _SLANG_BCST_EXIT_BLOCK;
-	break;
-
-      case ERRBLK_TOKEN:
-	if (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_TOP_LEVEL)
-	  {
-	     SLang_verror (SL_SYNTAX_ERROR, "misplaced ERROR_BLOCK");
-	     break;
-	  }
-	if (0 == check_error_block ())
-	  bc_sub_type = _SLANG_BCST_ERROR_BLOCK;
-	break;
-
-      case USRBLK0_TOKEN:
-      case USRBLK1_TOKEN:
-      case USRBLK2_TOKEN:
-      case USRBLK3_TOKEN:
-      case USRBLK4_TOKEN:
-	if (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_TOP_LEVEL)
-	  {
-	     SLang_verror (SL_SYNTAX_ERROR, "misplaced USER_BLOCK");
-	     break;
-	  }
-	bc_sub_type = _SLANG_BCST_USER_BLOCK0 + (t->type - USRBLK0_TOKEN);
-	break;
-
-      case NOTELSE_TOKEN:
-	bc_sub_type = _SLANG_BCST_NOTELSE;
-	break;
-
-      case ELSE_TOKEN:
-	bc_sub_type = _SLANG_BCST_ELSE;
-	break;
-
-      case LOOP_TOKEN:
-	bc_sub_type = _SLANG_BCST_LOOP;
-	break;
-
-      case DOWHILE_TOKEN:
-	bc_sub_type = _SLANG_BCST_DOWHILE;
-	break;
-
-      case WHILE_TOKEN:
-	bc_sub_type = _SLANG_BCST_WHILE;
-	break;
-
-      case ORELSE_TOKEN:
-	bc_sub_type = _SLANG_BCST_ORELSE;
-	break;
-
-      case _FOR_TOKEN:
-	bc_sub_type = _SLANG_BCST_FOR;
-	break;
-
-      case FOR_TOKEN:
-	bc_sub_type = _SLANG_BCST_CFOR;
-	break;
-
-      case FOREACH_TOKEN:
-	bc_sub_type = _SLANG_BCST_FOREACH;
-	break;
-
-      case OBRACE_TOKEN:
-	lang_begin_block ();
-	break;
-
-      default:
-	SLang_verror (SL_SYNTAX_ERROR, "Expecting directive token.  Found 0x%X", t->type);
-	break;
-     }
-
-   /* Reset this pointer first because compile_directive may cause a
-    * file to be loaded.
-    */
-   Compile_Mode_Function = compile_basic_token_mode;
-
-   if (bc_sub_type != -1)
-     compile_directive (bc_sub_type);
-}
-
-static unsigned int Assign_Mode_Type;
-static void compile_assign_mode (_SLang_Token_Type *t)
-{
-   if (t->type != IDENT_TOKEN)
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Expecting identifier for assignment");
-	return;
-     }
-
-   compile_assign (Assign_Mode_Type, t->v.s_val, t->hash);
-   Compile_Mode_Function = compile_basic_token_mode;
-}
-
-static void compile_basic_token_mode (_SLang_Token_Type *t)
-{
-   if (-1 == lang_check_space ())
-     return;
-
-   switch (t->type)
-     {
-      case PUSH_TOKEN:
-      case NOP_TOKEN:
-      case EOF_TOKEN:
-      case READONLY_TOKEN:
-      case DO_TOKEN:
-      case VARIABLE_TOKEN:
-      case SEMICOLON_TOKEN:
-      default:
-	SLang_verror (SL_SYNTAX_ERROR, "Unknown or unsupported token type 0x%X", t->type);
-	break;
-
-      case DEREF_TOKEN:
-	compile_call_direct (dereference_object, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case STRUCT_TOKEN:
-	compile_call_direct (_SLstruct_define_struct, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case TYPEDEF_TOKEN:
-	compile_call_direct (_SLstruct_define_typedef, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case TMP_TOKEN:
-	compile_tmp_variable (t->v.s_val, t->hash);
-	break;
-
-      case DOT_TOKEN:		       /* X . field */
-	compile_dot (t);
-	break;
-
-      case COMMA_TOKEN:
-	break;			       /* do nothing */
-
-      case IDENT_TOKEN:
-	compile_hashed_identifier (t->v.s_val, t->hash, t);
-	break;
-
-      case _REF_TOKEN:
-	compile_ref (t->v.s_val, t->hash);
-	break;
-
-      case ARG_TOKEN:
-	compile_call_direct (SLang_start_arg_list, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case EARG_TOKEN:
-	compile_lvar_call_direct (SLang_end_arg_list, _SLANG_BC_EARG_LVARIABLE, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case COLON_TOKEN:
-	if (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_BLOCK)
-	  compile_simple (_SLANG_BC_LABEL);
-	else SLang_Error = SL_SYNTAX_ERROR;
-	break;
-
-      case POP_TOKEN:
-	compile_call_direct (SLdo_pop, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case CASE_TOKEN:
-	if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_BLOCK)
-	  SLang_verror (SL_SYNTAX_ERROR, "Misplaced 'case'");
-	else
-	  compile_call_direct (case_function, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case CHAR_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_CHAR_TYPE);
-	break;
-      case SHORT_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_SHORT_TYPE);
-	break;
-      case INT_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL_INT, SLANG_INT_TYPE);
-	break;
-      case UCHAR_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_UCHAR_TYPE);
-	break;
-      case USHORT_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_USHORT_TYPE);
-	break;
-      case UINT_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL_INT, SLANG_UINT_TYPE);
-	break;
-      case LONG_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_LONG_TYPE);
-	break;
-      case ULONG_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_ULONG_TYPE);
-	break;
-
-#if SLANG_HAS_FLOAT
-      case FLOAT_TOKEN:
-	compile_float (t->v.s_val);
-	break;
-
-      case DOUBLE_TOKEN:
-	compile_double (t->v.s_val, SLANG_DOUBLE_TYPE);
-	break;
-#endif
-#if SLANG_HAS_COMPLEX
-      case COMPLEX_TOKEN:
-	compile_double (t->v.s_val, SLANG_COMPLEX_TYPE);
-	break;
-#endif
-
-      case STRING_TOKEN:
-	compile_string (t->v.s_val, t->hash);
-	break;
-
-      case _BSTRING_TOKEN:
-	compile_bstring (SLbstring_create ((unsigned char *)t->v.s_val, (unsigned int) t->hash));
-	break;
-
-      case BSTRING_TOKEN:
-	compile_bstring (t->v.b_val);
-	break;
-
-      case _NULL_TOKEN:
-	compile_identifier ("NULL", t);
-	break;
-
-      case _INLINE_WILDCARD_ARRAY_TOKEN:
-	compile_call_direct (_SLarray_wildcard_array, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case _INLINE_ARRAY_TOKEN:
-	compile_call_direct (_SLarray_inline_array, _SLANG_BC_CALL_DIRECT_FRAME);
-	break;
-
-      case _INLINE_IMPLICIT_ARRAY_TOKEN:
-	compile_call_direct (_SLarray_inline_implicit_array, _SLANG_BC_CALL_DIRECT_FRAME);
-	break;
-
-      case ARRAY_TOKEN:
-	compile_lvar_call_direct (_SLarray_aget, _SLANG_BC_LVARIABLE_AGET, _SLANG_BC_CALL_DIRECT_FRAME);
-	break;
-
-	/* Note: I need to add the other _ARRAY assign tokens. */
-      case _ARRAY_PLUSEQS_TOKEN:
-      case _ARRAY_MINUSEQS_TOKEN:
-      case _ARRAY_TIMESEQS_TOKEN:
-      case _ARRAY_DIVEQS_TOKEN:
-      case _ARRAY_BOREQS_TOKEN:
-      case _ARRAY_BANDEQS_TOKEN:
-      case _ARRAY_POST_MINUSMINUS_TOKEN:
-      case _ARRAY_MINUSMINUS_TOKEN:
-      case _ARRAY_POST_PLUSPLUS_TOKEN:
-      case _ARRAY_PLUSPLUS_TOKEN:
-	compile_array_assign (t);
-	break;
-
-      case _ARRAY_ASSIGN_TOKEN:
-	compile_lvar_call_direct (_SLarray_aput, _SLANG_BC_LVARIABLE_APUT, _SLANG_BC_CALL_DIRECT_FRAME);
-	break;
-
-      case _STRUCT_ASSIGN_TOKEN:
-      case _STRUCT_PLUSEQS_TOKEN:
-      case _STRUCT_MINUSEQS_TOKEN:
-      case _STRUCT_TIMESEQS_TOKEN:
-      case _STRUCT_DIVEQS_TOKEN:
-      case _STRUCT_BOREQS_TOKEN:
-      case _STRUCT_BANDEQS_TOKEN:
-      case _STRUCT_POST_MINUSMINUS_TOKEN:
-      case _STRUCT_MINUSMINUS_TOKEN:
-      case _STRUCT_POST_PLUSPLUS_TOKEN:
-      case _STRUCT_PLUSPLUS_TOKEN:
-	compile_struct_assign (t);
-	break;
-
-      case _SCALAR_ASSIGN_TOKEN:
-      case _SCALAR_PLUSEQS_TOKEN:
-      case _SCALAR_MINUSEQS_TOKEN:
-      case _SCALAR_TIMESEQS_TOKEN:
-      case _SCALAR_DIVEQS_TOKEN:
-      case _SCALAR_BOREQS_TOKEN:
-      case _SCALAR_BANDEQS_TOKEN:
-      case _SCALAR_POST_MINUSMINUS_TOKEN:
-      case _SCALAR_MINUSMINUS_TOKEN:
-      case _SCALAR_POST_PLUSPLUS_TOKEN:
-      case _SCALAR_PLUSPLUS_TOKEN:
-	compile_assign (_SLANG_BCST_ASSIGN + (t->type - _SCALAR_ASSIGN_TOKEN),
-			t->v.s_val, t->hash);
-	break;
-
-      case _DEREF_ASSIGN_TOKEN:
-	compile_deref_assign (t->v.s_val, t->hash);
-	break;
-
- 	/* For processing RPN tokens */
-      case ASSIGN_TOKEN:
-      case PLUSEQS_TOKEN:
-      case MINUSEQS_TOKEN:
-      case TIMESEQS_TOKEN:
-      case DIVEQS_TOKEN:
-      case BOREQS_TOKEN:
-      case BANDEQS_TOKEN:
-      case POST_MINUSMINUS_TOKEN:
-      case MINUSMINUS_TOKEN:
-      case POST_PLUSPLUS_TOKEN:
-      case PLUSPLUS_TOKEN:
-	Compile_Mode_Function = compile_assign_mode;
-	Assign_Mode_Type = _SLANG_BCST_ASSIGN + (t->type - ASSIGN_TOKEN);
-	break;
-
-      case LT_TOKEN:
-	compile_binary (SLANG_LT);
-	break;
-
-      case LE_TOKEN:
-	compile_binary (SLANG_LE);
-	break;
-
-      case GT_TOKEN:
-	compile_binary (SLANG_GT);
-	break;
-
-      case GE_TOKEN:
-	compile_binary (SLANG_GE);
-	break;
-
-      case EQ_TOKEN:
-	compile_binary (SLANG_EQ);
-	break;
-
-      case NE_TOKEN:
-	compile_binary (SLANG_NE);
-	break;
-
-      case AND_TOKEN:
-	compile_binary (SLANG_AND);
-	break;
-
-      case ADD_TOKEN:
-	compile_fast_binary (SLANG_PLUS, _SLANG_BC_INTEGER_PLUS);
-	break;
-
-      case SUB_TOKEN:
-	compile_fast_binary (SLANG_MINUS, _SLANG_BC_INTEGER_MINUS);
-	break;
-
-      case TIMES_TOKEN:
-	compile_binary (SLANG_TIMES);
-	break;
-
-      case DIV_TOKEN:
-	compile_binary (SLANG_DIVIDE);
-	break;
-
-      case POW_TOKEN:
-	compile_binary (SLANG_POW);
-	break;
-
-      case BXOR_TOKEN:
-	compile_binary (SLANG_BXOR);
-	break;
-
-      case BAND_TOKEN:
-	compile_binary (SLANG_BAND);
-	break;
-
-      case BOR_TOKEN:
-	compile_binary (SLANG_BOR);
-	break;
-
-      case SHR_TOKEN:
-	compile_binary (SLANG_SHR);
-	break;
-
-      case SHL_TOKEN:
-	compile_binary (SLANG_SHL);
-	break;
-
-      case MOD_TOKEN:
-	compile_binary (SLANG_MOD);
-	break;
-
-      case OR_TOKEN:
-	compile_binary (SLANG_OR);
-	break;
-
-      case NOT_TOKEN:
-	compile_unary (SLANG_NOT, _SLANG_BC_UNARY);
-	break;
-
-      case BNOT_TOKEN:
-	compile_unary (SLANG_BNOT, _SLANG_BC_UNARY);
-	break;
-
-      case MUL2_TOKEN:
-	compile_unary (SLANG_MUL2, _SLANG_BC_UNARY_FUNC);
-	break;
-
-      case CHS_TOKEN:
-	compile_unary (SLANG_CHS, _SLANG_BC_UNARY_FUNC);
-	break;
-
-      case ABS_TOKEN:
-	compile_unary (SLANG_ABS, _SLANG_BC_UNARY_FUNC);
-	break;
-
-      case SQR_TOKEN:
-	compile_unary (SLANG_SQR, _SLANG_BC_UNARY_FUNC);
-	break;
-
-      case SIGN_TOKEN:
-	compile_unary (SLANG_SIGN, _SLANG_BC_UNARY_FUNC);
-	break;
-
-      case BREAK_TOKEN:
-	compile_break (_SLANG_BC_BREAK, 1, 0, "break");
-	break;
-
-      case RETURN_TOKEN:
-	compile_break (_SLANG_BC_RETURN, 0, 1, "return");
-	break;
-
-      case CONT_TOKEN:
-	compile_break (_SLANG_BC_CONTINUE, 1, 0, "continue");
-	break;
-
-      case EXCH_TOKEN:
-	compile_break (_SLANG_BC_EXCH, 0, 0, "");   /* FIXME: Priority=low */
-	break;
-
-      case STATIC_TOKEN:
-	if (Lang_Defining_Function == 0)
-	  Compile_Mode_Function = compile_static_variable_mode;
-	else
-	  SLang_verror (SL_NOT_IMPLEMENTED, "static variables not permitted in functions");
-	break;
-
-      case PRIVATE_TOKEN:
-	if (Lang_Defining_Function == 0)
-	  Compile_Mode_Function = compile_private_variable_mode;
-	else
-	  SLang_verror (SL_NOT_IMPLEMENTED, "private variables not permitted in functions");
-	break;
-
-      case PUBLIC_TOKEN:
-	if (Lang_Defining_Function == 0)
-	  Compile_Mode_Function = compile_public_variable_mode;
-	else
-	  SLang_verror (SL_NOT_IMPLEMENTED, "public variables not permitted in functions");
-	break;
-
-      case OBRACKET_TOKEN:
-	if (Lang_Defining_Function == 0)
-	  Compile_Mode_Function = Default_Variable_Mode;
-	else
-	  Compile_Mode_Function = compile_local_variable_mode;
-	break;
-
-      case OPAREN_TOKEN:
-	lang_begin_function ();
-	break;
-
-      case DEFINE_STATIC_TOKEN:
-	if (Lang_Defining_Function)
-	  define_static_function (t->v.s_val, t->hash);
-	else SLang_Error = SL_SYNTAX_ERROR;
-	break;
-
-      case DEFINE_PRIVATE_TOKEN:
-	if (Lang_Defining_Function)
-	  define_private_function (t->v.s_val, t->hash);
-	else SLang_Error = SL_SYNTAX_ERROR;
-	break;
-
-      case DEFINE_PUBLIC_TOKEN:
-	if (Lang_Defining_Function)
-	  define_public_function (t->v.s_val, t->hash);
-	else SLang_Error = SL_SYNTAX_ERROR;
-	break;
-
-      case DEFINE_TOKEN:
-	if (Lang_Defining_Function)
-	  (*Default_Define_Function) (t->v.s_val, t->hash);
-	else
-	  SLang_Error = SL_SYNTAX_ERROR;
-	break;
-
-      case CPAREN_TOKEN:
-	if (Lang_Defining_Function)
-	  Compile_Mode_Function = compile_function_mode;
-	else SLang_Error = SL_SYNTAX_ERROR;
-	break;
-
-      case CBRACE_TOKEN:
-	lang_end_block ();
-	Compile_Mode_Function = compile_directive_mode;
-	break;
-
-      case OBRACE_TOKEN:
-	lang_begin_block ();
-	break;
-
-      case FARG_TOKEN:
-	Function_Args_Number = Local_Variable_Number;
-	break;
-
-#if _SLANG_HAS_DEBUG_CODE
-      case LINE_NUM_TOKEN:
-	Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LINE_NUM;
-	Compile_ByteCode_Ptr->b.l_blk = t->v.long_val;
-	lang_try_now ();
-	break;
-#endif
-      case POUND_TOKEN:
-	compile_call_direct (_SLarray_matrix_multiply, _SLANG_BC_CALL_DIRECT);
-	break;
-     }
-}
-
-void _SLcompile (_SLang_Token_Type *t)
-{
-   if (SLang_Error == 0)
-     {
-	if (Compile_Mode_Function != compile_basic_token_mode)
-	  {
-	     if (Compile_Mode_Function == NULL)
-	       Compile_Mode_Function = compile_basic_token_mode;
-#if _SLANG_HAS_DEBUG_CODE
-	     if (t->type == LINE_NUM_TOKEN)
-	       {
-		  compile_basic_token_mode (t);
-		  return;
-	       }
-#endif
-	  }
-
-	(*Compile_Mode_Function) (t);
-     }
-
-   if (SLang_Error)
-     {
-	Compile_Mode_Function = compile_basic_token_mode;
-	SLang_restart (0);
-     }
-}
-
-void (*_SLcompile_ptr)(_SLang_Token_Type *) = _SLcompile;
-
-typedef struct _Compile_Context_Type
-{
-   struct _Compile_Context_Type *next;
-   SLang_NameSpace_Type *static_namespace;
-   void (*compile_variable_mode) (_SLang_Token_Type *);
-   void (*define_function) (char *, unsigned long);
-   int lang_defining_function;
-   int local_variable_number;
-   unsigned int function_args_number;
-   SLang_Name_Type **locals_hash_table;
-   void (*compile_mode_function)(_SLang_Token_Type *);
-#if _SLANG_HAS_DEBUG_CODE
-   char *compile_filename;
-#endif
-}
-Compile_Context_Type;
-
-static Compile_Context_Type *Compile_Context_Stack;
-
-/* The only way the push/pop_context functions can get called is via
- * an eval type function.  That can only happen when executed from a
- * top level block.  This means that Compile_ByteCode_Ptr can always be
- * rest back to the beginning of a block.
- */
-
-static int pop_compile_context (void)
-{
-   Compile_Context_Type *cc;
-
-   if (NULL == (cc = Compile_Context_Stack))
-     return -1;
-
-   This_Static_NameSpace = cc->static_namespace;
-   Compile_Context_Stack = cc->next;
-   Default_Variable_Mode = cc->compile_variable_mode;
-   Default_Define_Function = cc->define_function;
-   Compile_Mode_Function = cc->compile_mode_function;
-
-   Lang_Defining_Function = cc->lang_defining_function;
-   Local_Variable_Number = cc->local_variable_number;
-   Function_Args_Number = cc->function_args_number;
-
-#if _SLANG_HAS_DEBUG_CODE
-   SLang_free_slstring (This_Compile_Filename);
-   This_Compile_Filename = cc->compile_filename;
-#endif
-
-   SLfree ((char *) Locals_Hash_Table);
-   Locals_Hash_Table = cc->locals_hash_table;
-
-   SLfree ((char *) cc);
-
-   return 0;
-}
-
-static int push_compile_context (char *name)
-{
-   Compile_Context_Type *cc;
-   SLang_Name_Type **lns;
-
-   cc = (Compile_Context_Type *)SLmalloc (sizeof (Compile_Context_Type));
-   if (cc == NULL)
-     return -1;
-   memset ((char *) cc, 0, sizeof (Compile_Context_Type));
-
-   lns = (SLang_Name_Type **) SLcalloc (sizeof (SLang_Name_Type *), SLLOCALS_HASH_TABLE_SIZE);
-   if (lns == NULL)
-     {
-	SLfree ((char *) cc);
-	return -1;
-     }
-
-#if _SLANG_HAS_DEBUG_CODE
-   if ((name != NULL)
-       && (NULL == (name = SLang_create_slstring (name))))
-     {
-	SLfree ((char *) cc);
-	SLfree ((char *) lns);
-	return -1;
-     }
-		
-   cc->compile_filename = This_Compile_Filename;
-   This_Compile_Filename = name;
-#endif
-
-   cc->static_namespace = This_Static_NameSpace;
-   cc->compile_variable_mode = Default_Variable_Mode;
-   cc->define_function = Default_Define_Function;
-   cc->locals_hash_table = Locals_Hash_Table;
-
-   cc->lang_defining_function = Lang_Defining_Function;
-   cc->local_variable_number = Local_Variable_Number;
-   cc->function_args_number = Function_Args_Number;
-   cc->locals_hash_table = Locals_Hash_Table;
-   cc->compile_mode_function = Compile_Mode_Function;
-
-   cc->next = Compile_Context_Stack;
-   Compile_Context_Stack = cc;
-
-   Compile_Mode_Function = compile_basic_token_mode;
-   Default_Variable_Mode = compile_public_variable_mode;
-   Default_Define_Function = define_public_function;
-   Lang_Defining_Function = 0;
-   Local_Variable_Number = 0;
-   Function_Args_Number = 0;
-   Locals_Hash_Table = lns;
-   return 0;
-}
-
-static int init_interpreter (void)
-{
-   SLang_NameSpace_Type *ns;
-
-   if (Global_NameSpace != NULL)
-     return 0;
-
-   if (NULL == (ns = _SLns_allocate_namespace ("***GLOBAL***", SLGLOBALS_HASH_TABLE_SIZE)))
-     return -1;
-   if (-1 == _SLns_set_namespace_name (ns, "Global"))
-     return -1;
-   Global_NameSpace = ns;
-
-   _SLRun_Stack = (SLang_Object_Type *) SLcalloc (SLANG_MAX_STACK_LEN,
-						  sizeof (SLang_Object_Type));
-   if (_SLRun_Stack == NULL)
-     return -1;
-
-   _SLStack_Pointer = _SLRun_Stack;
-   _SLStack_Pointer_Max = _SLRun_Stack + SLANG_MAX_STACK_LEN;
-
-   SLShort_Blocks[0].bc_main_type = _SLANG_BC_RETURN;
-   SLShort_Blocks[2].bc_main_type = _SLANG_BC_BREAK;
-   SLShort_Blocks[4].bc_main_type = _SLANG_BC_CONTINUE;
-
-   Num_Args_Stack = (int *) SLmalloc (sizeof (int) * SLANG_MAX_RECURSIVE_DEPTH);
-   if (Num_Args_Stack == NULL)
-     {
-	SLfree ((char *) _SLRun_Stack);
-	return -1;
-     }
-   Recursion_Depth = 0;
-   Frame_Pointer_Stack = (unsigned int *) SLmalloc (sizeof (unsigned int) * SLANG_MAX_RECURSIVE_DEPTH);
-   if (Frame_Pointer_Stack == NULL)
-     {
-	SLfree ((char *) _SLRun_Stack);
-	SLfree ((char *)Num_Args_Stack);
-	return -1;
-     }
-   Frame_Pointer_Depth = 0;
-   Frame_Pointer = _SLRun_Stack;
-
-   Default_Variable_Mode = compile_public_variable_mode;
-   Default_Define_Function = define_public_function;
-   return 0;
-}
-
-static int add_generic_table (SLang_NameSpace_Type *ns,
-			      SLang_Name_Type *table, char *pp_name,
-			      unsigned int entry_len)
-{
-   SLang_Name_Type *t, **ns_table;
-   char *name;
-   unsigned int table_size;
-   
-   if (-1 == init_interpreter ())
-     return -1;
-   
-   if (ns == NULL) 
-     ns = Global_NameSpace;
-   
-   ns_table = ns->table;
-   table_size = ns->table_size;
-	
-   if ((pp_name != NULL)
-       && (-1 == SLdefine_for_ifdef (pp_name)))
-     return -1;
-
-   t = table;
-   while (NULL != (name = t->name))
-     {
-	unsigned long hash;
-
-	/* Backward compatibility: '.' WAS used as hash marker */
-	if (*name == '.')
-	  {
-	     name++;
-	     t->name = name;
-	  }
-
-	if (NULL == (name = SLang_create_slstring (name)))
-	  return -1;
-
-	t->name = name;
-
-	hash = _SLcompute_string_hash (name);
-	hash = hash % table_size;
-
-	t->next = ns_table [(unsigned int) hash];
-	ns_table [(unsigned int) hash] = t;
-
-	t = (SLang_Name_Type *) ((char *)t + entry_len);
-     }
-
-   return 0;
-}
-
-int SLadd_intrin_fun_table (SLang_Intrin_Fun_Type *tbl, char *pp)
-{
-   return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Intrin_Fun_Type));
-}
-
-int SLadd_intrin_var_table (SLang_Intrin_Var_Type *tbl, char *pp)
-{
-   return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Intrin_Var_Type));
-}
-
-int SLadd_app_unary_table (SLang_App_Unary_Type *tbl, char *pp)
-{
-   return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_App_Unary_Type));
-}
-
-int SLadd_math_unary_table (SLang_Math_Unary_Type *tbl, char *pp)
-{
-   return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Math_Unary_Type));
-}
-
-int SLadd_iconstant_table (SLang_IConstant_Type *tbl, char *pp)
-{
-   return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_IConstant_Type));
-}
-
-#if SLANG_HAS_FLOAT
-int SLadd_dconstant_table (SLang_DConstant_Type *tbl, char *pp)
-{
-   return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_DConstant_Type));
-}
-#endif
-
-/* ----------- */
-int SLns_add_intrin_fun_table (SLang_NameSpace_Type *ns, SLang_Intrin_Fun_Type *tbl, char *pp)
-{
-   return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Intrin_Fun_Type));
-}
-
-int SLns_add_intrin_var_table (SLang_NameSpace_Type *ns, SLang_Intrin_Var_Type *tbl, char *pp)
-{
-   return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Intrin_Var_Type));
-}
-
-int SLns_add_app_unary_table (SLang_NameSpace_Type *ns, SLang_App_Unary_Type *tbl, char *pp)
-{
-   return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_App_Unary_Type));
-}
-
-int SLns_add_math_unary_table (SLang_NameSpace_Type *ns, SLang_Math_Unary_Type *tbl, char *pp)
-{
-   return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Math_Unary_Type));
-}
-
-int SLns_add_iconstant_table (SLang_NameSpace_Type *ns, SLang_IConstant_Type *tbl, char *pp)
-{
-   return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_IConstant_Type));
-}
-
-#if SLANG_HAS_FLOAT
-int SLns_add_dconstant_table (SLang_NameSpace_Type *ns, SLang_DConstant_Type *tbl, char *pp)
-{
-   return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_DConstant_Type));
-}
-#endif
-
-/* what is a bitmapped value:
- * 1 intrin fun
- * 2 user fun
- * 4 intrin var
- * 8 user defined var
- */
-SLang_Array_Type *_SLang_apropos (char *namespace_name, char *pat, unsigned int what)
-{
-   SLang_NameSpace_Type *ns;
-
-   if (namespace_name == NULL)
-     namespace_name = "Global";
-
-   if (*namespace_name == 0)
-     ns = This_Static_NameSpace;
-   else ns = _SLns_find_namespace (namespace_name);
-
-   return _SLnspace_apropos (ns, pat, what);
-}
-
-void _SLang_implements_intrinsic (char *name)
-{
-   if (This_Static_NameSpace == NULL)
-     {
-	SLang_verror (SL_INTRINSIC_ERROR, "No namespace available");
-	return;
-     }
-
-   (void) _SLns_set_namespace_name (This_Static_NameSpace, name);
-
-   Default_Define_Function = define_static_function;
-   Default_Variable_Mode = compile_static_variable_mode;
-}
-
-void _SLang_use_namespace_intrinsic (char *name)
-{
-   SLang_NameSpace_Type *ns;
-   
-   if (NULL == (ns = _SLns_find_namespace (name)))
-     {
-	SLang_verror (SL_INTRINSIC_ERROR, "Namespace %s does not exist", name);
-	return;
-     }
-   This_Static_NameSpace = ns;
-   if (Global_NameSpace == ns)
-     {
-	Default_Define_Function = define_public_function;
-	Default_Variable_Mode = compile_public_variable_mode;
-     }
-   else
-     {
-	Default_Define_Function = define_static_function;
-	Default_Variable_Mode = compile_static_variable_mode;
-     }
-}
-
-
-char *_SLang_cur_namespace_intrinsic (void)
-{
-   if (This_Static_NameSpace == NULL)
-     return "Global";
-
-   if (This_Static_NameSpace->namespace_name == NULL)
-     return "";
-   
-   return This_Static_NameSpace->namespace_name;
-}
diff --git a/mdk-stage1/slang/slang.h b/mdk-stage1/slang/slang.h
deleted file mode 100644
index 900b14043..000000000
--- a/mdk-stage1/slang/slang.h
+++ /dev/null
@@ -1,1930 +0,0 @@
-#ifndef DAVIS_SLANG_H_
-#define DAVIS_SLANG_H_
-/* -*- mode: C; mode: fold; -*- */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#define SLANG_VERSION 10404
-#define SLANG_VERSION_STRING "1.4.4"
-
-/*{{{ System Dependent Macros and Typedefs */
-
-#if defined(__WATCOMC__) && defined(DOS)
-# ifndef __MSDOS__
-#  define __MSDOS__
-# endif
-# ifndef  DOS386
-#  define  DOS386
-# endif
-# ifndef IBMPC_SYSTEM
-#  define IBMPC_SYSTEM
-# endif
-#endif /* __watcomc__ */
-
-#if defined(unix) || defined(__unix)
-# ifndef __unix__
-#  define __unix__ 1
-# endif
-#endif
-
-#if !defined(__GO32__)
-# ifdef __unix__
-#  define REAL_UNIX_SYSTEM
-# endif
-#endif
-
-/* Set of the various defines for pc systems.  This includes OS/2 */
-#ifdef __GO32__
-# ifndef __DJGPP__
-#  define __DJGPP__ 1
-# endif
-# ifndef IBMPC_SYSTEM
-#   define IBMPC_SYSTEM
-# endif
-#endif
-
-#ifdef __BORLANDC__
-# ifndef IBMPC_SYSTEM
-#  define IBMPC_SYSTEM
-# endif
-#endif
-
-#ifdef __MSDOS__
-# ifndef IBMPC_SYSTEM
-#   define IBMPC_SYSTEM
-# endif
-#endif
-
-#if defined(OS2) || defined(__os2__)
-# ifndef IBMPC_SYSTEM
-#   define IBMPC_SYSTEM
-# endif
-# ifndef __os2__
-#  define __os2__
-# endif
-#endif
-
-#if defined(__NT__) || defined(__MINGW32__) || defined(__CYGWIN32__)
-# ifndef IBMPC_SYSTEM
-#  define IBMPC_SYSTEM
-# endif
-#endif
-
-#if defined(IBMPC_SYSTEM) || defined(VMS)
-# ifdef REAL_UNIX_SYSTEM
-#  undef REAL_UNIX_SYSTEM
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-#if 0
-}
-#endif
-
-#include <stdio.h>
-#include <stdarg.h>
-#if defined(__STDC__) || defined(__BORLANDC__) || defined(__cplusplus)
-# include <stddef.h>		       /* for offsetof */
-#endif
-
-/* ---------------------------- Generic Macros ----------------------------- */
-
-/*  __SC__ is defined for Symantec C++
-   DOS386 is defined for -mx memory model, 32 bit DOS extender. */
-
-#if defined(__SC__) && !defined(DOS386)
-# include <dos.h>
-#endif
-
-#if defined(__BORLANDC__)
-# include <alloc.h>
-#endif
-
-#if defined (__cplusplus) || defined(__STDC__) || defined(IBMPC_SYSTEM)
-  typedef void *VOID_STAR;
-#else
-  typedef unsigned char *VOID_STAR;
-#endif
-
-typedef int (*FVOID_STAR)(void);
-
-#if defined(__MSDOS_) && defined(__BORLANDC__)
-# define SLFREE(buf)  farfree((void far *)(buf))
-# define SLMALLOC(x) farmalloc((unsigned long) (x))
-# define SLREALLOC(buf, n) farrealloc((void far *) (buf), (unsigned long) (n))
-# define SLCALLOC(n, m) farcalloc((unsigned long) (n), (unsigned long) (m))
-#else
-# if defined(VMS) && !defined(__DECC)
-#  define SLFREE VAXC$FREE_OPT
-#  define SLMALLOC VAXC$MALLOC_OPT
-#  define SLREALLOC VAXC$REALLOC_OPT
-#  define SLCALLOC VAXC$CALLOC_OPT
-# else
-#  define SLFREE(x) free((char *)(x))
-#  define SLMALLOC malloc
-#  define SLREALLOC realloc
-#  define SLCALLOC calloc
-# endif
-#endif
-
-   extern char *SLdebug_malloc (unsigned long);
-   extern char *SLdebug_calloc (unsigned long, unsigned long);
-   extern char *SLdebug_realloc (char *, unsigned long);
-   extern void SLdebug_free (char *);
-   extern void SLmalloc_dump_statistics (void);
-   extern char *SLstrcpy(register char *, register char *);
-   extern int SLstrcmp(register char *, register char *);
-   extern char *SLstrncpy(char *, register char *, register  int);
-
-   extern void SLmemset (char *, char, int);
-   extern char *SLmemchr (register char *, register char, register int);
-   extern char *SLmemcpy (char *, char *, int);
-   extern int SLmemcmp (char *, char *, int);
-
-/*}}}*/
-
-/*{{{ Interpreter Typedefs */
-
-typedef struct _SLang_Name_Type
-{
-   char *name;
-   struct _SLang_Name_Type *next;
-   char name_type;
-   /* These values must be less than 0x10 because they map directly
-    * to byte codes.  See _slang.h.
-    */
-#define SLANG_LVARIABLE		0x01
-#define SLANG_GVARIABLE 	0x02
-#define SLANG_IVARIABLE 	0x03           /* intrinsic variables */
-   /* Note!!! For Macro MAKE_VARIABLE below to work, SLANG_IVARIABLE Must
-    be 1 less than SLANG_RVARIABLE!!! */
-#define SLANG_RVARIABLE		0x04	       /* read only variable */
-#define SLANG_INTRINSIC 	0x05
-#define SLANG_FUNCTION  	0x06
-#define SLANG_MATH_UNARY  	0x07
-#define SLANG_APP_UNARY  	0x08
-#define SLANG_ICONSTANT		0x09
-#define SLANG_DCONSTANT		0x0A
-#define SLANG_PVARIABLE		0x0B   /* private */
-#define SLANG_PFUNCTION		0x0C   /* private */
-
-   /* Rest of fields depend on name type */
-}
-SLang_Name_Type;
-
-typedef struct
-{
-   char *name;
-   struct _SLang_Name_Type *next;      /* this is for the hash table */
-   char name_type;
-
-   FVOID_STAR i_fun;		       /* address of object */
-
-   /* Do not change this without modifying slang.c:execute_intrinsic_fun */
-#define SLANG_MAX_INTRIN_ARGS	7
-   unsigned char arg_types [SLANG_MAX_INTRIN_ARGS];
-   unsigned char num_args;
-   unsigned char return_type;
-}
-SLang_Intrin_Fun_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-
-   VOID_STAR addr;
-   unsigned char type;
-}
-SLang_Intrin_Var_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-
-   int unary_op;
-}
-SLang_App_Unary_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-
-   int unary_op;
-}
-SLang_Math_Unary_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-   int i;
-}
-SLang_IConstant_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-   double d;
-}
-SLang_DConstant_Type;
-
-typedef struct
-{
-   char *field_name;
-   unsigned int offset;
-   unsigned char type;
-   unsigned char read_only;
-}
-SLang_IStruct_Field_Type;
-
-extern int SLadd_intrin_fun_table (SLang_Intrin_Fun_Type *, char *);
-extern int SLadd_intrin_var_table (SLang_Intrin_Var_Type *, char *);
-extern int SLadd_app_unary_table (SLang_App_Unary_Type *, char *);
-extern int SLadd_math_unary_table (SLang_Math_Unary_Type *, char *);
-extern int SLadd_iconstant_table (SLang_IConstant_Type *, char *);
-extern int SLadd_dconstant_table (SLang_DConstant_Type *, char *);
-extern int SLadd_istruct_table (SLang_IStruct_Field_Type *, VOID_STAR, char *);
-
-typedef struct _SLang_NameSpace_Type SLang_NameSpace_Type;
-
-extern int SLns_add_intrin_fun_table (SLang_NameSpace_Type *, SLang_Intrin_Fun_Type *, char *);
-extern int SLns_add_intrin_var_table (SLang_NameSpace_Type *, SLang_Intrin_Var_Type *, char *);
-extern int SLns_add_app_unary_table (SLang_NameSpace_Type *, SLang_App_Unary_Type *, char *);
-extern int SLns_add_math_unary_table (SLang_NameSpace_Type *, SLang_Math_Unary_Type *, char *);
-extern int SLns_add_iconstant_table (SLang_NameSpace_Type *, SLang_IConstant_Type *, char *);
-extern int SLns_add_dconstant_table (SLang_NameSpace_Type *, SLang_DConstant_Type *, char *);
-extern int SLns_add_istruct_table (SLang_NameSpace_Type *, SLang_IStruct_Field_Type *, VOID_STAR, char *);
-
-extern SLang_NameSpace_Type *SLns_create_namespace (char *);
-extern void SLns_delete_namespace (SLang_NameSpace_Type *);
-
-typedef struct SLang_Load_Type
-{
-   int type;
-
-   VOID_STAR client_data;
-   /* Pointer to data that client needs for loading */
-
-   int auto_declare_globals;
-   /* if non-zero, undefined global variables are declared as static */
-
-   char *(*read)(struct SLang_Load_Type *);
-   /* function to call to read next line from obj. */
-
-   unsigned int line_num;
-   /* Number of lines read, used for error reporting */
-
-   int parse_level;
-   /* 0 if at top level of parsing */
-
-   char *name;
-   /* Name of this object, e.g., filename.  This name should be unique because
-    * it alone determines the name space for static objects associated with
-    * the compilable unit.
-    */
-
-   unsigned long reserved[4];
-   /* For future expansion */
-} SLang_Load_Type;
-
-extern SLang_Load_Type *SLallocate_load_type (char *);
-extern void SLdeallocate_load_type (SLang_Load_Type *);
-
-/* Returns SLang_Error upon failure */
-extern int SLang_load_object (SLang_Load_Type *);
-extern int (*SLang_Load_File_Hook)(char *);
-extern int (*SLang_Auto_Declare_Var_Hook) (char *);
-
-extern int SLang_generate_debug_info (int);
-
-
-#if defined(ultrix) && !defined(__GNUC__)
-# ifndef NO_PROTOTYPES
-#  define NO_PROTOTYPES
-# endif
-#endif
-
-#ifndef NO_PROTOTYPES
-# define _PROTO(x) x
-#else
-# define _PROTO(x) ()
-#endif
-
-typedef struct SL_OOBinary_Type
-{
-   unsigned char data_type;	       /* partner type for binary op */
-
-    int (*binary_function)_PROTO((int,
-				 unsigned char, VOID_STAR, unsigned int,
-				 unsigned char, VOID_STAR, unsigned int,
-				 VOID_STAR));
-
-   int (*binary_result) _PROTO((int, unsigned char, unsigned char, unsigned char *));
-   struct SL_OOBinary_Type *next;
-}
-SL_OOBinary_Type;
-
-typedef struct _SL_Typecast_Type
-{
-   unsigned char data_type;	       /* to_type */
-   int allow_implicit;
-
-   int (*typecast)_PROTO((unsigned char, VOID_STAR, unsigned int,
-			  unsigned char, VOID_STAR));
-   struct _SL_Typecast_Type *next;
-}
-SL_Typecast_Type;
-
-typedef struct _SLang_Struct_Type SLang_Struct_Type;
-
-#if defined(SL_APP_WANTS_FOREACH)
-/* It is up to the application to define struct _SLang_Foreach_Context_Type */
-typedef struct _SLang_Foreach_Context_Type SLang_Foreach_Context_Type;
-#else
-typedef int SLang_Foreach_Context_Type;
-#endif
-
-typedef struct
-{
-   unsigned char cl_class_type;
-#define SLANG_CLASS_TYPE_MMT		0
-#define SLANG_CLASS_TYPE_SCALAR		1
-#define SLANG_CLASS_TYPE_VECTOR		2
-#define SLANG_CLASS_TYPE_PTR		3
-
-   unsigned int cl_data_type;	       /* SLANG_INTEGER_TYPE, etc... */
-   char *cl_name;			       /* slstring type */
-
-   unsigned int cl_sizeof_type;
-   VOID_STAR cl_transfer_buf;	       /* cl_sizeof_type bytes*/
-
-   /* Methods */
-
-   /* Most of the method functions are prototyped:
-    * int method (unsigned char type, VOID_STAR addr);
-    * Here, @type@ represents the type of object that the method is asked
-    * to deal with.  The second parameter @addr@ will contain the ADDRESS of
-    * the object.  For example, if type is SLANG_INT_TYPE, then @addr@ will
-    * actually be int *.  Similary, if type is SLANG_STRING_TYPE,
-    * then @addr@ will contain the address of the string, i.e., char **.
-    */
-
-   void (*cl_destroy)_PROTO((unsigned char, VOID_STAR));
-   /* Prototype: void destroy(unsigned type, VOID_STAR val)
-    * Called to delete/free the object */
-
-   char *(*cl_string)_PROTO((unsigned char, VOID_STAR));
-   /* Prototype: char *to_string (unsigned char t, VOID_STAR p);
-    * Here p is a pointer to the object for which a string representation
-    * is to be returned.  The returned pointer is to be a MALLOCED string.
-    */
-
-   /* Prototype: void push(unsigned char type, VOID_STAR v);
-    * Push a copy of the object of type @type@ at address @v@ onto the
-    * stack.
-    */
-   int (*cl_push)_PROTO((unsigned char, VOID_STAR));
-
-   /* Prototype: int pop(unsigned char type, VOID_STAR v);
-    * Pops value from stack and assign it to object, whose address is @v@.
-    */
-   int (*cl_pop)_PROTO((unsigned char, VOID_STAR));
-
-   int (*cl_unary_op_result_type)_PROTO((int, unsigned char, unsigned char *));
-   int (*cl_unary_op)_PROTO((int, unsigned char, VOID_STAR, unsigned int, VOID_STAR));
-
-   int (*cl_app_unary_op_result_type)_PROTO((int, unsigned char, unsigned char *));
-   int (*cl_app_unary_op)_PROTO((int, unsigned char, VOID_STAR, unsigned int, VOID_STAR));
-
-   /* If this function is non-NULL, it will be called for sin, cos, etc... */
-#define SLMATH_SIN	1
-#define SLMATH_COS	2
-#define SLMATH_TAN	3
-#define SLMATH_ATAN	4
-#define SLMATH_ASIN	5
-#define SLMATH_ACOS	6
-#define SLMATH_EXP	7
-#define SLMATH_LOG	8
-#define SLMATH_SQRT	9
-#define SLMATH_LOG10	10
-#define SLMATH_REAL	11
-#define SLMATH_IMAG	12
-#define SLMATH_SINH	13
-#define SLMATH_COSH	14
-#define SLMATH_TANH	15
-#define SLMATH_ATANH	16
-#define SLMATH_ASINH	17
-#define SLMATH_ACOSH	18
-#define SLMATH_TODOUBLE	19
-#define SLMATH_CONJ	20
-
-   int (*cl_math_op)_PROTO((int, unsigned char, VOID_STAR, unsigned int, VOID_STAR));
-   int (*cl_math_op_result_type)_PROTO((int, unsigned char, unsigned char *));
-
-   SL_OOBinary_Type *cl_binary_ops;
-   SL_Typecast_Type *cl_typecast_funs;
-
-   void (*cl_byte_code_destroy)_PROTO((unsigned char, VOID_STAR));
-   void (*cl_user_destroy_fun)_PROTO((unsigned char, VOID_STAR));
-   int (*cl_init_array_object)_PROTO((unsigned char, VOID_STAR));
-   int (*cl_datatype_deref)_PROTO((unsigned char));
-   SLang_Struct_Type *cl_struct_def;
-   int (*cl_dereference) _PROTO((unsigned char, VOID_STAR));
-   int (*cl_acopy) (unsigned char, VOID_STAR, VOID_STAR);
-   int (*cl_apop) _PROTO((unsigned char, VOID_STAR));
-   int (*cl_apush) _PROTO((unsigned char, VOID_STAR));
-   int (*cl_push_literal) _PROTO((unsigned char, VOID_STAR));
-   void (*cl_adestroy)_PROTO((unsigned char, VOID_STAR));
-   int (*cl_push_intrinsic)_PROTO((unsigned char, VOID_STAR));
-   int (*cl_void_typecast)_PROTO((unsigned char, VOID_STAR, unsigned int, unsigned char, VOID_STAR));
-
-   int (*cl_anytype_typecast)_PROTO((unsigned char, VOID_STAR, unsigned int, unsigned char, VOID_STAR));
-
-   /* Array access functions */
-   int (*cl_aput) (unsigned char, unsigned int);
-   int (*cl_aget) (unsigned char, unsigned int);
-   int (*cl_anew) (unsigned char, unsigned int);
-
-   /* length method */
-   int (*cl_length) (unsigned char, VOID_STAR, unsigned int *);
-
-   /* foreach */
-   SLang_Foreach_Context_Type *(*cl_foreach_open) (unsigned char, unsigned int);
-   void (*cl_foreach_close) (unsigned char, SLang_Foreach_Context_Type *);
-   int (*cl_foreach) (unsigned char, SLang_Foreach_Context_Type *);
-
-   /* Structure access: get and put (assign to) fields */
-   int (*cl_sput) (unsigned char, char *);
-   int (*cl_sget) (unsigned char, char *);
-
-   /* File I/O */
-   int (*cl_fread) (unsigned char, FILE *, VOID_STAR, unsigned int, unsigned int *);
-   int (*cl_fwrite) (unsigned char, FILE *, VOID_STAR, unsigned int, unsigned int *);
-   int (*cl_fdread) (unsigned char, int, VOID_STAR, unsigned int, unsigned int *);
-   int (*cl_fdwrite) (unsigned char, int, VOID_STAR, unsigned int, unsigned int *);
-
-   int (*cl_to_bool) (unsigned char, int *);
-   
-   int (*cl_cmp)(unsigned char, VOID_STAR, VOID_STAR, int *);
-
-} SLang_Class_Type;
-
-/* These are the low-level functions for building push/pop methods.  They
- * know nothing about memory management.  For SLANG_CLASS_TYPE_MMT, use the
- * MMT push/pop functions instead.
- */
-extern int SLclass_push_double_obj (unsigned char, double);
-extern int SLclass_push_float_obj (unsigned char, float);
-extern int SLclass_push_long_obj (unsigned char, long);
-extern int SLclass_push_int_obj (unsigned char, int);
-extern int SLclass_push_short_obj (unsigned char, short);
-extern int SLclass_push_char_obj (unsigned char, char);
-extern int SLclass_push_ptr_obj (unsigned char, VOID_STAR);
-extern int SLclass_pop_double_obj (unsigned char, double *);
-extern int SLclass_pop_float_obj (unsigned char, float *);
-extern int SLclass_pop_long_obj (unsigned char, long *);
-extern int SLclass_pop_int_obj (unsigned char, int *);
-extern int SLclass_pop_short_obj (unsigned char, short *);
-extern int SLclass_pop_char_obj (unsigned char, char *);
-extern int SLclass_pop_ptr_obj (unsigned char, VOID_STAR *);
-
-extern SLang_Class_Type *SLclass_allocate_class (char *);
-extern int SLclass_get_class_id (SLang_Class_Type *cl);
-extern int SLclass_create_synonym (char *, unsigned char);
-extern int SLclass_is_class_defined (unsigned char);
-
-extern int SLclass_register_class (SLang_Class_Type *, unsigned char, unsigned int, unsigned char);
-extern int SLclass_set_string_function (SLang_Class_Type *, char *(*)(unsigned char, VOID_STAR));
-extern int SLclass_set_destroy_function (SLang_Class_Type *, void (*)(unsigned char, VOID_STAR));
-extern int SLclass_set_push_function (SLang_Class_Type *, int (*)(unsigned char, VOID_STAR));
-extern int SLclass_set_pop_function (SLang_Class_Type *, int (*)(unsigned char, VOID_STAR));
-
-extern int SLclass_set_aget_function (SLang_Class_Type *, int (*)(unsigned char, unsigned int));
-extern int SLclass_set_aput_function (SLang_Class_Type *, int (*)(unsigned char, unsigned int));
-extern int SLclass_set_anew_function (SLang_Class_Type *, int (*)(unsigned char, unsigned int));
-
-extern int SLclass_set_sget_function (SLang_Class_Type *, int (*)(unsigned char, char *));
-extern int SLclass_set_sput_function (SLang_Class_Type *, int (*)(unsigned char, char *));
-
-/* Typecast object on the stack to type p1.  p2 and p3 should be set to 1 */
-extern int SLclass_typecast (unsigned char, int, int);
-
-extern int SLclass_add_unary_op (unsigned char,
-				 int (*) (int,
-					  unsigned char, VOID_STAR, unsigned int,
-					  VOID_STAR),
-				 int (*) (int, unsigned char, unsigned char *));
-
-extern int
-SLclass_add_app_unary_op (unsigned char,
-			  int (*) (int,
-				   unsigned char, VOID_STAR, unsigned int,
-				   VOID_STAR),
-			  int (*) (int, unsigned char, unsigned char *));
-
-extern int
-SLclass_add_binary_op (unsigned char, unsigned char,
-		       int (*) (int,
-				unsigned char, VOID_STAR, unsigned int,
-				unsigned char, VOID_STAR, unsigned int,
-				VOID_STAR),
-		       int (*) (int, unsigned char, unsigned char, unsigned char *));
-
-extern int
-SLclass_add_math_op (unsigned char,
-		     int (*)(int,
-			     unsigned char, VOID_STAR, unsigned int,
-			     VOID_STAR),
-		     int (*)(int, unsigned char, unsigned char *));
-
-extern int
-SLclass_add_typecast (unsigned char /* from */, unsigned char /* to */,
-		      int (*)_PROTO((unsigned char, VOID_STAR, unsigned int,
-				     unsigned char, VOID_STAR)),
-		      int	       /* allow implicit typecasts */
-		      );
-
-extern char *SLclass_get_datatype_name (unsigned char);
-
-extern double SLcomplex_abs (double *);
-extern double *SLcomplex_times (double *, double *, double *);
-extern double *SLcomplex_divide (double *, double *, double *);
-extern double *SLcomplex_sin (double *, double *);
-extern double *SLcomplex_cos (double *, double *);
-extern double *SLcomplex_tan (double *, double *);
-extern double *SLcomplex_asin (double *, double *);
-extern double *SLcomplex_acos (double *, double *);
-extern double *SLcomplex_atan (double *, double *);
-extern double *SLcomplex_exp (double *, double *);
-extern double *SLcomplex_log (double *, double *);
-extern double *SLcomplex_log10 (double *, double *);
-extern double *SLcomplex_sqrt (double *, double *);
-extern double *SLcomplex_sinh (double *, double *);
-extern double *SLcomplex_cosh (double *, double *);
-extern double *SLcomplex_tanh (double *, double *);
-extern double *SLcomplex_pow (double *, double *, double *);
-extern double SLmath_hypot (double x, double y);
-
-/* Not implemented yet */
-extern double *SLcomplex_asinh (double *, double *);
-extern double *SLcomplex_acosh (double *, double *);
-extern double *SLcomplex_atanh (double *, double *);
-
-#ifdef _SLANG_SOURCE_
-typedef struct _SLang_MMT_Type SLang_MMT_Type;
-#else
-typedef int SLang_MMT_Type;
-#endif
-
-extern void SLang_free_mmt (SLang_MMT_Type *);
-extern VOID_STAR SLang_object_from_mmt (SLang_MMT_Type *);
-extern SLang_MMT_Type *SLang_create_mmt (unsigned char, VOID_STAR);
-extern int SLang_push_mmt (SLang_MMT_Type *);
-extern SLang_MMT_Type *SLang_pop_mmt (unsigned char);
-extern void SLang_inc_mmt (SLang_MMT_Type *);
-
-/* Maximum number of dimensions of an array. */
-#define SLARRAY_MAX_DIMS		7
-typedef struct _SLang_Array_Type
-{
-   unsigned char data_type;
-   unsigned int sizeof_type;
-   VOID_STAR data;
-   unsigned int num_elements;
-   unsigned int num_dims;
-   int dims [SLARRAY_MAX_DIMS];
-   VOID_STAR (*index_fun)_PROTO((struct _SLang_Array_Type *, int *));
-   /* This function is designed to allow a type to store an array in
-    * any manner it chooses.  This function returns the address of the data
-    * value at the specified index location.
-    */
-   unsigned int flags;
-#define SLARR_DATA_VALUE_IS_READ_ONLY		1
-#define SLARR_DATA_VALUE_IS_POINTER		2
-#define SLARR_DATA_VALUE_IS_RANGE		4
-#define SLARR_DATA_VALUE_IS_INTRINSIC		8
-   SLang_Class_Type *cl;
-   unsigned int num_refs;
-}
-SLang_Array_Type;
-
-extern int SLang_pop_array_of_type (SLang_Array_Type **, unsigned char);
-extern int SLang_pop_array (SLang_Array_Type **, int);
-extern int SLang_push_array (SLang_Array_Type *, int);
-extern void SLang_free_array (SLang_Array_Type *);
-extern SLang_Array_Type *SLang_create_array (unsigned char, int, VOID_STAR, int *, unsigned int);
-extern SLang_Array_Type *SLang_duplicate_array (SLang_Array_Type *);
-extern int SLang_get_array_element (SLang_Array_Type *, int *, VOID_STAR);
-extern int SLang_set_array_element (SLang_Array_Type *, int *, VOID_STAR);
-
-
-/*}}}*/
-
-/*{{{ Interpreter Function Prototypes */
-
-  extern volatile int SLang_Error;
-/* Non zero if error occurs.  Must be reset to zero to continue. */
-/* error codes, severe errors are less than 0 */
-#define SL_APPLICATION_ERROR		-2
-#define SL_VARIABLE_UNINITIALIZED	-3
-#define SL_INTERNAL_ERROR		-5
-#define SL_STACK_OVERFLOW		-6
-#define SL_STACK_UNDERFLOW		-7
-#define SL_UNDEFINED_NAME		-8
-#define SL_SYNTAX_ERROR			-9
-#define SL_DUPLICATE_DEFINITION		-10
-#define SL_TYPE_MISMATCH		-11
-#define SL_OBJ_UNKNOWN			-13
-#define SL_UNKNOWN_ERROR		-14
-#define SL_TYPE_UNDEFINED_OP_ERROR	-16
-
-#define SL_INTRINSIC_ERROR		1
-/* Intrinsic error is an error generated by intrinsic functions */
-#define SL_USER_BREAK			2
-#define SL_DIVIDE_ERROR			3
-#define SL_OBJ_NOPEN			4
-#define SL_USER_ERROR			5
-#define SL_USAGE_ERROR			6
-#define SL_READONLY_ERROR		7
-#define SL_INVALID_PARM			8
-#define SL_NOT_IMPLEMENTED		9
-#define SL_MALLOC_ERROR			10
-#define SL_OVERFLOW			11
-#define SL_FLOATING_EXCEPTION		12
-
-/* Compatibility */
-#define USER_BREAK SL_USER_BREAK
-#define INTRINSIC_ERROR SL_INTRINSIC_ERROR
-
-  extern int SLang_Traceback;
-  /* If non-zero, dump an S-Lang traceback upon error.  Available as
-     _traceback in S-Lang. */
-
-  extern char *SLang_User_Prompt;
-  /* Prompt to use when reading from stdin */
-  extern int SLang_Version;
-  extern char *SLang_Version_String;
-extern char *SLang_Doc_Dir;
-
-extern void (*SLang_VMessage_Hook) (char *, va_list);
-extern void SLang_vmessage (char *, ...);
-
-  extern void (*SLang_Error_Hook)(char *);
-  /* Pointer to application dependent error messaging routine.  By default,
-     messages are displayed on stderr. */
-
-  extern void (*SLang_Exit_Error_Hook)(char *, va_list);
-  extern void SLang_exit_error (char *, ...);
-  extern void (*SLang_Dump_Routine)(char *);
-  /* Called if S-Lang traceback is enabled as well as other debugging
-     routines (e.g., trace).  By default, these messages go to stderr. */
-
-  extern void (*SLang_Interrupt)(void);
-  /* function to call whenever inner interpreter is entered.  This is
-     a good place to set SLang_Error to USER_BREAK. */
-
-  extern void (*SLang_User_Clear_Error)(void);
-  /* function that gets called when '_clear_error' is called. */
-
-  /* If non null, these call C functions before and after a slang function. */
-  extern void (*SLang_Enter_Function)(char *);
-extern void (*SLang_Exit_Function)(char *);
-
-extern int SLang_Num_Function_Args;
-
-/* Functions: */
-
-extern int SLang_init_all (void);
-/* Initializes interpreter and all modules */
-
-extern int SLang_init_slang (void);
-/* This function is mandatory and must be called by all applications that
- * use the interpreter
- */
-extern int SLang_init_posix_process (void);   /* process specific intrinsics */
-extern int SLang_init_stdio (void);    /* fgets, etc. stdio functions  */
-extern int SLang_init_posix_dir (void);
-extern int SLang_init_ospath (void);
-
-extern int SLang_init_slmath (void);
-/* called if math functions sin, cos, etc... are needed. */
-
-   extern int SLang_init_slfile (void);
-   extern int SLang_init_slunix (void);
-   /* These functions are obsolte.  Use init_stdio, posix_process, etc. */
-
-extern int SLang_init_slassoc (void);
-/* Assoc Arrays (Hashes) */
-
-extern int SLang_init_array (void);
-/* Additional arrays functions: transpose, etc... */
-
-/* Dynamic linking facility */
-extern int SLang_init_import (void);
-
-   extern int SLang_load_file (char *);
-   /* Load a file of S-Lang code for interpreting.  If the parameter is
-    * NULL, input comes from stdin. */
-
-   extern void SLang_restart(int);
-   /* should be called if an error occurs.  If the passed integer is
-    * non-zero, items are popped off the stack; otherwise, the stack is
-    * left intact.  Any time the stack is believed to be trashed, this routine
-    * should be called with a non-zero argument (e.g., if setjmp/longjmp is
-    * called). */
-
-   extern int SLang_byte_compile_file(char *, int);
-   /* takes a file of S-Lang code and ``byte-compiles'' it for faster
-    * loading.  The new filename is equivalent to the old except that a `c' is
-    * appended to the name.  (e.g., init.sl --> init.slc).  The second
-    * specified the method; currently, it is not used.
-    */
-
-   extern int SLang_autoload(char *, char *);
-   /* Automatically load S-Lang function p1 from file p2.  This function
-      is also available via S-Lang */
-
-   extern int SLang_load_string(char *);
-   /* Like SLang_load_file except input is from a null terminated string. */
-
-   extern int SLdo_pop(void);
-   /* pops item off stack and frees any memory associated with it */
-   extern int SLdo_pop_n(unsigned int);
-   /* pops n items off stack and frees any memory associated with them */
-
-extern int SLang_pop_integer(int *);
-extern int SLang_pop_uinteger(unsigned int *);
-   /* pops integer *p0 from the stack.  Returns 0 upon success and non-zero
-    * if the stack is empty or a type mismatch occurs, setting SLang_Error.
-    */
-extern int SLang_pop_char (char *);
-extern int SLang_pop_uchar (unsigned char *);
-extern int SLang_pop_short(short *);
-extern int SLang_pop_ushort(unsigned short *);
-extern int SLang_pop_long(long *);
-extern int SLang_pop_ulong(unsigned long *);
-
-extern int SLang_pop_float(float *);
-extern int SLang_pop_double(double *, int *, int *);
-   /* Pops double *p1 from stack.  If *p3 is non-zero, *p1 was derived
-      from the integer *p2. Returns zero upon success. */
-
-   extern int SLang_pop_complex (double *, double *);
-
-   extern int SLpop_string (char **);
-   extern int SLang_pop_string(char **, int *);
-   /* pops string *p0 from stack.  If *p1 is non-zero, the string must be
-    * freed after its use.  DO NOT FREE p0 if *p1 IS ZERO! Returns 0 upon
-    * success */
-
-   extern int SLang_push_complex (double, double);
-
-   extern int SLang_push_char (char);
-   extern int SLang_push_uchar (unsigned char);
-
-   extern int SLang_push_integer(int);
-   extern int SLang_push_uinteger(unsigned int);
-   /* push integer p1 on stack */
-
-   extern int SLang_push_short(short);
-   extern int SLang_push_ushort(unsigned short);
-   extern int SLang_push_long(long);
-   extern int SLang_push_ulong(unsigned long);
-   extern int SLang_push_float(float);
-   extern int SLang_push_double(double);
-   /* Push double onto stack */
-
-   extern int SLang_push_string(char *);
-   /* Push string p1 onto stack */
-
-   extern int SLang_push_malloced_string(char *);
-   /* The normal SLang_push_string pushes an slstring.  This one converts
-    * a normally malloced string to an slstring, and then frees the 
-    * malloced string.  So, do NOT use the malloced string after calling
-    * this routine because it will be freed!  The routine returns -1 upon 
-    * error, but the string will be freed.
-    */
-
-extern int SLang_push_null (void);
-extern int SLang_pop_null (void);
-
-extern int SLang_push_value (unsigned char type, VOID_STAR);
-extern int SLang_pop_value (unsigned char type, VOID_STAR);
-extern void SLang_free_value (unsigned char type, VOID_STAR);
-
-typedef struct _SLang_Object_Type SLang_Any_Type;
-
-extern int SLang_pop_anytype (SLang_Any_Type **);
-extern int SLang_push_anytype (SLang_Any_Type *);
-extern void SLang_free_anytype (SLang_Any_Type *);
-
-#ifdef _SLANG_SOURCE_
-typedef struct _SLang_Ref_Type SLang_Ref_Type;
-#else
-typedef int SLang_Ref_Type;
-#endif
-
-extern int SLang_pop_ref (SLang_Ref_Type **);
-extern void SLang_free_ref (SLang_Ref_Type *);
-extern int SLang_assign_to_ref (SLang_Ref_Type *, unsigned char, VOID_STAR);
-extern SLang_Name_Type *SLang_pop_function (void);
-extern SLang_Name_Type *SLang_get_fun_from_ref (SLang_Ref_Type *);
-extern void SLang_free_function (SLang_Name_Type *f);
-
-   extern int SLang_is_defined(char *);
-   /* Return non-zero is p1 is defined otherwise returns 0. */
-
-   extern int SLang_run_hooks(char *, unsigned int, ...);
-   /* calls S-Lang function p1 pushing p2 strings in the variable argument
-    * list onto the stack first.
-    * Returns -1 upon error, 1 if hooks exists and it ran,
-    * or 0 if hook does not exist.  Thus it returns non-zero is hook was called.
-    */
-
-/* These functions return 1 if the indicated function exists and the function
- * runs without error.  If the function does not exist, the function returns
- * 0.  Otherwise -1 is returned with SLang_Error set appropriately.
- */
-extern int SLexecute_function (SLang_Name_Type *);
-extern int SLang_execute_function(char *);
-
-
-extern int SLang_end_arg_list (void);
-extern int SLang_start_arg_list (void);
-
-extern void SLang_verror (int, char *, ...);
-
-extern void SLang_doerror(char *);
-   /* set SLang_Error and display p1 as error message */
-
-extern int SLang_add_intrinsic_array (char *,   /* name */
-				      unsigned char,   /* type */
-				      int,   /* readonly */
-				      VOID_STAR,   /* data */
-				      unsigned int, ...);   /* num dims */
-
-extern int SLextract_list_element (char *, unsigned int, char,
-				   char *, unsigned int);
-
-extern void SLexpand_escaped_string (register char *, register char *,
-				     register char *);
-
-extern SLang_Name_Type *SLang_get_function (char *);
-extern void SLang_release_function (SLang_Name_Type *);
-
-extern int SLreverse_stack (int);
-extern int SLroll_stack (int);
-/* If argument p is positive, the top p objects on the stack are rolled
- * up.  If negative, the stack is rolled down.
- */
-extern int SLdup_n (int n);
-/* Duplicate top n elements of stack */
-
-extern int SLang_peek_at_stack1 (void);
-extern int SLang_peek_at_stack (void);
-/* Returns type of next object on stack-- -1 upon stack underflow. */
-extern void SLmake_lut (unsigned char *, unsigned char *, unsigned char);
-
-   extern int SLang_guess_type (char *);
-
-extern int SLstruct_create_struct (unsigned int,
-				   char **,
-				   unsigned char *,
-				   VOID_STAR *);
-
-/*}}}*/
-
-/*{{{ Misc Functions */
-
-/* This is an interface to atexit */
-extern int SLang_add_cleanup_function (void (*)(void));
-
-extern char *SLmake_string (char *);
-extern char *SLmake_nstring (char *, unsigned int);
-/* Returns a null terminated string made from the first n characters of the
- * string.
- */
-
-/* The string created by this routine must be freed by SLang_free_slstring
- * and nothing else!!  Also these strings must not be modified.  Use
- * SLmake_string if you intend to modify them!!
- */
-extern char *SLang_create_nslstring (char *, unsigned int);
-extern char *SLang_create_slstring (char *);
-extern void SLang_free_slstring (char *);    /* handles NULL */
-extern int SLang_pop_slstring (char **);   /* free with SLang_free_slstring */
-extern char *SLang_concat_slstrings (char *a, char *b);
-extern char *SLang_create_static_slstring (char *);   /* adds a string that will not get deleted */
-extern void SLstring_dump_stats (void);
-
-/* Binary strings */
-/* The binary string is an opaque type.  Use the SLbstring_get_pointer function
- * to get a pointer and length.
- */
-typedef struct _SLang_BString_Type SLang_BString_Type;
-extern unsigned char *SLbstring_get_pointer (SLang_BString_Type *, unsigned int *);
-
-extern SLang_BString_Type *SLbstring_dup (SLang_BString_Type *);
-extern SLang_BString_Type *SLbstring_create (unsigned char *, unsigned int);
-
-/* The create_malloced function used the first argument which is assumed
- * to be a pointer to a len + 1 malloced string.  The extra byte is for
- * \0 termination.
- */
-extern SLang_BString_Type *SLbstring_create_malloced (unsigned char *, unsigned int, int);
-
-/* Create a bstring from an slstring */
-extern SLang_BString_Type *SLbstring_create_slstring (char *);
-
-extern void SLbstring_free (SLang_BString_Type *);
-extern int SLang_pop_bstring (SLang_BString_Type **);
-extern int SLang_push_bstring (SLang_BString_Type *);
-
-extern char *SLmalloc (unsigned int);
-extern char *SLcalloc (unsigned int, unsigned int);
-extern void SLfree(char *);	       /* This function handles NULL */
-extern char *SLrealloc (char *, unsigned int);
-
-extern char *SLcurrent_time_string (void);
-
-extern int SLatoi(unsigned char *);
-extern long SLatol (unsigned char *);
-extern unsigned long SLatoul (unsigned char *);
-
-extern int SLang_pop_fileptr (SLang_MMT_Type **, FILE **);
-extern char *SLang_get_name_from_fileptr (SLang_MMT_Type *);
-
-typedef struct _SLFile_FD_Type SLFile_FD_Type;
-extern SLFile_FD_Type *SLfile_create_fd (char *, int);
-extern void SLfile_free_fd (SLFile_FD_Type *);
-extern int SLfile_push_fd (SLFile_FD_Type *);
-extern int SLfile_pop_fd (SLFile_FD_Type **);
-extern int SLfile_get_fd (SLFile_FD_Type *, int *);
-extern SLFile_FD_Type *SLfile_dup_fd (SLFile_FD_Type *f0);
-extern int SLang_init_posix_io (void);
-
-typedef double (*SLang_To_Double_Fun_Type)(VOID_STAR);
-extern SLang_To_Double_Fun_Type SLarith_get_to_double_fun (unsigned char, unsigned int *);
-
-extern int SLang_set_argc_argv (int, char **);
-
-/*}}}*/
-
-/*{{{ SLang getkey interface Functions */
-
-#ifdef REAL_UNIX_SYSTEM
-extern int SLang_TT_Baud_Rate;
-extern int SLang_TT_Read_FD;
-#endif
-
-extern int SLang_init_tty (int, int, int);
-/* Initializes the tty for single character input.  If the first parameter *p1
- * is in the range 0-255, it will be used for the abort character;
- * otherwise, (unix only) if it is -1, the abort character will be the one
- * used by the terminal.  If the second parameter p2 is non-zero, flow
- * control is enabled.  If the last parmeter p3 is zero, output processing
- * is NOT turned on.  A value of zero is required for the screen management
- * routines. Returns 0 upon success. In addition, if SLang_TT_Baud_Rate ==
- * 0 when this function is called, SLang will attempt to determine the
- * terminals baud rate.  As far as the SLang library is concerned, if
- * SLang_TT_Baud_Rate is less than or equal to zero, the baud rate is
- * effectively infinite.
- */
-
-extern void SLang_reset_tty (void);
-/* Resets tty to what it was prior to a call to SLang_init_tty */
-#ifdef REAL_UNIX_SYSTEM
-extern void SLtty_set_suspend_state (int);
-   /* If non-zero argument, terminal driver will be told to react to the
-    * suspend character.  If 0, it will not.
-    */
-extern int (*SLang_getkey_intr_hook) (void);
-#endif
-
-#define SLANG_GETKEY_ERROR 0xFFFF
-extern unsigned int SLang_getkey (void);
-/* reads a single key from the tty.  If the read fails,  0xFFFF is returned. */
-
-#ifdef IBMPC_SYSTEM
-extern int SLgetkey_map_to_ansi (int);
-#endif
-
-extern int SLang_ungetkey_string (unsigned char *, unsigned int);
-extern int SLang_buffer_keystring (unsigned char *, unsigned int);
-extern int SLang_ungetkey (unsigned char);
-extern void SLang_flush_input (void);
-extern int SLang_input_pending (int);
-extern int SLang_Abort_Char;
-/* The value of the character (0-255) used to trigger SIGINT */
-extern int SLang_Ignore_User_Abort;
-/* If non-zero, pressing the abort character will not result in USER_BREAK
- * SLang_Error. */
-
-extern int SLang_set_abort_signal (void (*)(int));
-/* If SIGINT is generated, the function p1 will be called.  If p1 is NULL
- * the SLang_default signal handler is called.  This sets SLang_Error to
- * USER_BREAK.  I suspect most users will simply want to pass NULL.
- */
-extern unsigned int SLang_Input_Buffer_Len;
-
-extern volatile int SLKeyBoard_Quit;
-
-#ifdef VMS
-/* If this function returns -1, ^Y will be added to input buffer. */
-extern int (*SLtty_VMS_Ctrl_Y_Hook) (void);
-#endif
-/*}}}*/
-
-/*{{{ SLang Keymap routines */
-
-typedef struct SLKeymap_Function_Type
-{
-   char *name;
-   int (*f)(void);
-}
-SLKeymap_Function_Type;
-
-#define SLANG_MAX_KEYMAP_KEY_SEQ	14
-typedef struct SLang_Key_Type
-{
-   struct SLang_Key_Type *next;
-   union
-     {
-	char *s;
-	FVOID_STAR f;
-	unsigned int keysym;
-     }
-     f;
-   unsigned char type;	       /* type of function */
-#define SLKEY_F_INTERPRET	0x01
-#define SLKEY_F_INTRINSIC	0x02
-#define SLKEY_F_KEYSYM		0x03
-   unsigned char str[SLANG_MAX_KEYMAP_KEY_SEQ + 1];/* key sequence */
-}
-SLang_Key_Type;
-
-typedef struct SLKeyMap_List_Type
-{
-   char *name;			       /* hashed string */
-   SLang_Key_Type *keymap;
-   SLKeymap_Function_Type *functions;  /* intrinsic functions */
-}
-SLKeyMap_List_Type;
-
-/* This is arbitrary but I have got to start somewhere */
-#define SLANG_MAX_KEYMAPS 30
-extern SLKeyMap_List_Type SLKeyMap_List[SLANG_MAX_KEYMAPS];
-
-extern char *SLang_process_keystring(char *);
-
-extern int SLkm_define_key (char *, FVOID_STAR, SLKeyMap_List_Type *);
-
-extern int SLang_define_key(char *, char *, SLKeyMap_List_Type *);
-/* Like define_key1 except that p2 is a string that is to be associated with
- * a function in the functions field of p3.  This routine calls define_key1.
- */
-
-extern int SLkm_define_keysym (char *, unsigned int, SLKeyMap_List_Type *);
-
-extern void SLang_undefine_key(char *, SLKeyMap_List_Type *);
-
-extern SLKeyMap_List_Type *SLang_create_keymap(char *, SLKeyMap_List_Type *);
-/* create and returns a pointer to a new keymap named p1 created by copying
- * keymap p2.  If p2 is NULL, it is up to the calling routine to initialize
- * the keymap.
- */
-
-extern char *SLang_make_keystring(unsigned char *);
-
-extern SLang_Key_Type *SLang_do_key(SLKeyMap_List_Type *, int (*)(void));
-/* read a key using keymap p1 with getkey function p2 */
-
-extern
-     FVOID_STAR
-     SLang_find_key_function(char *, SLKeyMap_List_Type *);
-
-extern SLKeyMap_List_Type *SLang_find_keymap(char *);
-
-extern int SLang_Last_Key_Char;
-extern int SLang_Key_TimeOut_Flag;
-
-/*}}}*/
-
-/*{{{ SLang Readline Interface */
-
-typedef struct SLang_Read_Line_Type
-{
-   struct SLang_Read_Line_Type *prev, *next;
-   unsigned char *buf;
-   int buf_len;			       /* number of chars in the buffer */
-   int num;			       /* num and misc are application specific*/
-   int misc;
-} SLang_Read_Line_Type;
-
-/* Maximum size of display */
-#define SLRL_DISPLAY_BUFFER_SIZE 256
-
-typedef struct
-{
-   SLang_Read_Line_Type *root, *tail, *last;
-   unsigned char *buf;		       /* edit buffer */
-   int buf_len;			       /* sizeof buffer */
-   int point;			       /* current editing point */
-   int tab;			       /* tab width */
-   int len;			       /* current line size */
-
-   /* display variables */
-   int edit_width;		       /* length of display field */
-   int curs_pos;			       /* current column */
-   int start_column;		       /* column offset of display */
-   int dhscroll;		       /* amount to use for horiz scroll */
-   char *prompt;
-
-   FVOID_STAR last_fun;		       /* last function executed by rl */
-
-   /* These two contain an image of what is on the display */
-   unsigned char upd_buf1[SLRL_DISPLAY_BUFFER_SIZE];
-   unsigned char upd_buf2[SLRL_DISPLAY_BUFFER_SIZE];
-   unsigned char *old_upd, *new_upd;   /* pointers to previous two buffers */
-   int new_upd_len, old_upd_len;       /* length of output buffers */
-
-   SLKeyMap_List_Type *keymap;
-
-   /* tty variables */
-   unsigned int flags;		       /*  */
-#define SL_RLINE_NO_ECHO	1
-#define SL_RLINE_USE_ANSI	2
-#define SL_RLINE_BLINK_MATCH	4
-   unsigned int (*getkey)(void);       /* getkey function -- required */
-   void (*tt_goto_column)(int);
-   void (*tt_insert)(char);
-   void (*update_hook)(unsigned char *, int, int);
-   /* The update hook is called with a pointer to a buffer p1 that contains
-    * an image of what the update hook is suppoed to produce.  The length
-    * of the buffer is p2 and after the update, the cursor is to be placed
-    * in column p3.
-    */
-   /* This function is only called when blinking matches */
-   int (*input_pending)(int);
-   unsigned long reserved[4];
-} SLang_RLine_Info_Type;
-
-extern int SLang_RL_EOF_Char;
-
-extern SLang_Read_Line_Type * SLang_rline_save_line (SLang_RLine_Info_Type *);
-extern int SLang_init_readline (SLang_RLine_Info_Type *);
-extern int SLang_read_line (SLang_RLine_Info_Type *);
-extern int SLang_rline_insert (char *);
-extern void SLrline_redraw (SLang_RLine_Info_Type *);
-extern int SLang_Rline_Quit;
-
-/*}}}*/
-
-/*{{{ Low Level Screen Output Interface */
-
-extern unsigned long SLtt_Num_Chars_Output;
-extern int SLtt_Baud_Rate;
-
-typedef unsigned long SLtt_Char_Type;
-
-#define SLTT_BOLD_MASK	0x01000000UL
-#define SLTT_BLINK_MASK	0x02000000UL
-#define SLTT_ULINE_MASK	0x04000000UL
-#define SLTT_REV_MASK	0x08000000UL
-#define SLTT_ALTC_MASK  0x10000000UL
-
-extern int SLtt_Screen_Rows;
-extern int SLtt_Screen_Cols;
-extern int SLtt_Term_Cannot_Insert;
-extern int SLtt_Term_Cannot_Scroll;
-extern int SLtt_Use_Ansi_Colors;
-extern int SLtt_Ignore_Beep;
-#if defined(REAL_UNIX_SYSTEM)
-extern int SLtt_Force_Keypad_Init;
-extern int SLang_TT_Write_FD;
-#endif
-
-#ifndef IBMPC_SYSTEM
-extern char *SLtt_Graphics_Char_Pairs;
-#endif
-
-#ifndef __GO32__
-#if defined(VMS) || defined(REAL_UNIX_SYSTEM)
-extern int SLtt_Blink_Mode;
-extern int SLtt_Use_Blink_For_ACS;
-extern int SLtt_Newline_Ok;
-extern int SLtt_Has_Alt_Charset;
-extern int SLtt_Has_Status_Line;       /* if 0, NO.  If > 0, YES, IF -1, ?? */
-# ifndef VMS
-extern int SLtt_Try_Termcap;
-# endif
-#endif
-#endif
-
-#if defined(IBMPC_SYSTEM)
-extern int SLtt_Msdos_Cheap_Video;
-#endif
-
-typedef unsigned short SLsmg_Char_Type;
-#define SLSMG_EXTRACT_CHAR(x) ((x) & 0xFF)
-#define SLSMG_EXTRACT_COLOR(x) (((x)>>8)&0xFF)
-#define SLSMG_BUILD_CHAR(ch,color) (((SLsmg_Char_Type)(unsigned char)(ch))|((color)<<8))
-
-extern int SLtt_flush_output (void);
-extern void SLtt_set_scroll_region(int, int);
-extern void SLtt_reset_scroll_region(void);
-extern void SLtt_reverse_video (int);
-extern void SLtt_bold_video (void);
-extern void SLtt_begin_insert(void);
-extern void SLtt_end_insert(void);
-extern void SLtt_del_eol(void);
-extern void SLtt_goto_rc (int, int);
-extern void SLtt_delete_nlines(int);
-extern void SLtt_delete_char(void);
-extern void SLtt_erase_line(void);
-extern void SLtt_normal_video(void);
-extern void SLtt_cls(void);
-extern void SLtt_beep(void);
-extern void SLtt_reverse_index(int);
-extern void SLtt_smart_puts(SLsmg_Char_Type *, SLsmg_Char_Type *, int, int);
-extern void SLtt_write_string (char *);
-extern void SLtt_putchar(char);
-extern int SLtt_init_video (void);
-extern int SLtt_reset_video (void);
-extern void SLtt_get_terminfo(void);
-extern void SLtt_get_screen_size (void);
-extern int SLtt_set_cursor_visibility (int);
-
-extern int SLtt_set_mouse_mode (int, int);
-
-#if defined(VMS) || defined(REAL_UNIX_SYSTEM)
-extern int SLtt_initialize (char *);
-extern void SLtt_enable_cursor_keys(void);
-extern void SLtt_set_term_vtxxx(int *);
-extern void SLtt_set_color_esc (int, char *);
-extern void SLtt_wide_width(void);
-extern void SLtt_narrow_width(void);
-extern void SLtt_set_alt_char_set (int);
-extern int SLtt_write_to_status_line (char *, int);
-extern void SLtt_disable_status_line (void);
-# ifdef REAL_UNIX_SYSTEM
-/* These are termcap/terminfo routines that assume SLtt_initialize has
- * been called.
- */
-extern char *SLtt_tgetstr (char *);
-extern int SLtt_tgetnum (char *);
-extern int SLtt_tgetflag (char *);
-
-/* The following are terminfo-only routines -- these prototypes will change
- * in V2.x.
- */
-extern char *SLtt_tigetent (char *);
-extern char *SLtt_tigetstr (char *, char **);
-extern int SLtt_tigetnum (char *, char **);
-# endif
-#endif
-
-extern SLtt_Char_Type SLtt_get_color_object (int);
-extern void SLtt_set_color_object (int, SLtt_Char_Type);
-extern void SLtt_set_color (int, char *, char *, char *);
-extern void SLtt_set_mono (int, char *, SLtt_Char_Type);
-extern void SLtt_add_color_attribute (int, SLtt_Char_Type);
-extern void SLtt_set_color_fgbg (int, SLtt_Char_Type, SLtt_Char_Type);
-
-/*}}}*/
-
-/*{{{ SLang Preprocessor Interface */
-
-typedef struct
-{
-   int this_level;
-   int exec_level;
-   int prev_exec_level;
-   char preprocess_char;
-   char comment_char;
-   unsigned char flags;
-#define SLPREP_BLANK_LINES_OK	1
-#define SLPREP_COMMENT_LINES_OK	2
-}
-SLPreprocess_Type;
-
-extern int SLprep_open_prep (SLPreprocess_Type *);
-extern void SLprep_close_prep (SLPreprocess_Type *);
-extern int SLprep_line_ok (char *, SLPreprocess_Type *);
-   extern int SLdefine_for_ifdef (char *);
-   /* Adds a string to the SLang #ifdef preparsing defines. SLang already
-      defines MSDOS, UNIX, and VMS on the appropriate system. */
-extern int (*SLprep_exists_hook) (char *, char);
-
-/*}}}*/
-
-/*{{{ SLsmg Screen Management Functions */
-
-extern void SLsmg_fill_region (int, int, unsigned int, unsigned int, unsigned char);
-extern void SLsmg_set_char_set (int);
-#ifndef IBMPC_SYSTEM
-extern int SLsmg_Scroll_Hash_Border;
-#endif
-extern int SLsmg_suspend_smg (void);
-extern int SLsmg_resume_smg (void);
-extern void SLsmg_erase_eol (void);
-extern void SLsmg_gotorc (int, int);
-extern void SLsmg_erase_eos (void);
-extern void SLsmg_reverse_video (void);
-extern void SLsmg_set_color (int);
-extern void SLsmg_normal_video (void);
-extern void SLsmg_printf (char *, ...);
-extern void SLsmg_vprintf (char *, va_list);
-extern void SLsmg_write_string (char *);
-extern void SLsmg_write_nstring (char *, unsigned int);
-extern void SLsmg_write_char (char);
-extern void SLsmg_write_nchars (char *, unsigned int);
-extern void SLsmg_write_wrapped_string (char *, int, int, unsigned int, unsigned int, int);
-extern void SLsmg_cls (void);
-extern void SLsmg_refresh (void);
-extern void SLsmg_touch_lines (int, unsigned int);
-extern void SLsmg_touch_screen (void);
-extern int SLsmg_init_smg (void);
-extern int SLsmg_reinit_smg (void);
-extern void SLsmg_reset_smg (void);
-extern SLsmg_Char_Type SLsmg_char_at(void);
-extern void SLsmg_set_screen_start (int *, int *);
-extern void SLsmg_draw_hline (unsigned int);
-extern void SLsmg_draw_vline (int);
-extern void SLsmg_draw_object (int, int, unsigned char);
-extern void SLsmg_draw_box (int, int, unsigned int, unsigned int);
-extern int SLsmg_get_column(void);
-extern int SLsmg_get_row(void);
-extern void SLsmg_forward (int);
-extern void SLsmg_write_color_chars (SLsmg_Char_Type *, unsigned int);
-extern unsigned int SLsmg_read_raw (SLsmg_Char_Type *, unsigned int);
-extern unsigned int SLsmg_write_raw (SLsmg_Char_Type *, unsigned int);
-extern void SLsmg_set_color_in_region (int, int, int, unsigned int, unsigned int);
-extern int SLsmg_Display_Eight_Bit;
-extern int SLsmg_Tab_Width;
-
-#define SLSMG_NEWLINE_IGNORED	0      /* default */
-#define SLSMG_NEWLINE_MOVES	1      /* moves to next line, column 0 */
-#define SLSMG_NEWLINE_SCROLLS	2      /* moves but scrolls at bottom of screen */
-#define SLSMG_NEWLINE_PRINTABLE	3      /* prints as ^J */
-extern int SLsmg_Newline_Behavior;
-
-extern int SLsmg_Backspace_Moves;
-
-#ifdef IBMPC_SYSTEM
-# define SLSMG_HLINE_CHAR	0xC4
-# define SLSMG_VLINE_CHAR	0xB3
-# define SLSMG_ULCORN_CHAR	0xDA
-# define SLSMG_URCORN_CHAR	0xBF
-# define SLSMG_LLCORN_CHAR	0xC0
-# define SLSMG_LRCORN_CHAR	0xD9
-# define SLSMG_RTEE_CHAR	0xB4
-# define SLSMG_LTEE_CHAR	0xC3
-# define SLSMG_UTEE_CHAR	0xC2
-# define SLSMG_DTEE_CHAR	0xC1
-# define SLSMG_PLUS_CHAR	0xC5
-/* There are several to choose from: 0xB0, 0xB1, and 0xB2 */
-# define SLSMG_CKBRD_CHAR	0xB0
-# define SLSMG_DIAMOND_CHAR	0x04
-# define SLSMG_DEGREE_CHAR	0xF8
-# define SLSMG_PLMINUS_CHAR	0xF1
-# define SLSMG_BULLET_CHAR	0xF9
-# define SLSMG_LARROW_CHAR	0x1B
-# define SLSMG_RARROW_CHAR	0x1A
-# define SLSMG_DARROW_CHAR	0x19
-# define SLSMG_UARROW_CHAR	0x18
-# define SLSMG_BOARD_CHAR	0xB2
-# define SLSMG_BLOCK_CHAR	0xDB
-#else
-# if defined(AMIGA)
-#  define SLSMG_HLINE_CHAR	'-'
-#  define SLSMG_VLINE_CHAR	'|'
-#  define SLSMG_ULCORN_CHAR	'+'
-#  define SLSMG_URCORN_CHAR	'+'
-#  define SLSMG_LLCORN_CHAR	'+'
-#  define SLSMG_LRCORN_CHAR	'+'
-#  define SLSMG_CKBRD_CHAR	'#'
-#  define SLSMG_RTEE_CHAR	'+'
-#  define SLSMG_LTEE_CHAR	'+'
-#  define SLSMG_UTEE_CHAR	'+'
-#  define SLSMG_DTEE_CHAR	'+'
-#  define SLSMG_PLUS_CHAR	'+'
-#  define SLSMG_DIAMOND_CHAR	'+'
-#  define SLSMG_DEGREE_CHAR	'\\'
-#  define SLSMG_PLMINUS_CHAR	'#'
-#  define SLSMG_BULLET_CHAR	'o'
-#  define SLSMG_LARROW_CHAR	'<'
-#  define SLSMG_RARROW_CHAR	'>'
-#  define SLSMG_DARROW_CHAR	'v'
-#  define SLSMG_UARROW_CHAR	'^'
-#  define SLSMG_BOARD_CHAR	'#'
-#  define SLSMG_BLOCK_CHAR	'#'
-# else
-#  define SLSMG_HLINE_CHAR	'q'
-#  define SLSMG_VLINE_CHAR	'x'
-#  define SLSMG_ULCORN_CHAR	'l'
-#  define SLSMG_URCORN_CHAR	'k'
-#  define SLSMG_LLCORN_CHAR	'm'
-#  define SLSMG_LRCORN_CHAR	'j'
-#  define SLSMG_CKBRD_CHAR	'a'
-#  define SLSMG_RTEE_CHAR	'u'
-#  define SLSMG_LTEE_CHAR	't'
-#  define SLSMG_UTEE_CHAR	'w'
-#  define SLSMG_DTEE_CHAR	'v'
-#  define SLSMG_PLUS_CHAR	'n'
-#  define SLSMG_DIAMOND_CHAR	'`'
-#  define SLSMG_DEGREE_CHAR	'f'
-#  define SLSMG_PLMINUS_CHAR	'g'
-#  define SLSMG_BULLET_CHAR	'~'
-#  define SLSMG_LARROW_CHAR	','
-#  define SLSMG_RARROW_CHAR	'+'
-#  define SLSMG_DARROW_CHAR	'.'
-#  define SLSMG_UARROW_CHAR	'-'
-#  define SLSMG_BOARD_CHAR	'h'
-#  define SLSMG_BLOCK_CHAR	'0'
-# endif				       /* AMIGA */
-#endif				       /* IBMPC_SYSTEM */
-
-#ifndef IBMPC_SYSTEM
-# define SLSMG_COLOR_BLACK		0x000000
-# define SLSMG_COLOR_RED		0x000001
-# define SLSMG_COLOR_GREEN		0x000002
-# define SLSMG_COLOR_BROWN		0x000003
-# define SLSMG_COLOR_BLUE		0x000004
-# define SLSMG_COLOR_MAGENTA		0x000005
-# define SLSMG_COLOR_CYAN		0x000006
-# define SLSMG_COLOR_LGRAY		0x000007
-# define SLSMG_COLOR_GRAY		0x000008
-# define SLSMG_COLOR_BRIGHT_RED		0x000009
-# define SLSMG_COLOR_BRIGHT_GREEN	0x00000A
-# define SLSMG_COLOR_BRIGHT_BROWN	0x00000B
-# define SLSMG_COLOR_BRIGHT_BLUE	0x00000C
-# define SLSMG_COLOR_BRIGHT_CYAN	0x00000D
-# define SLSMG_COLOR_BRIGHT_MAGENTA	0x00000E
-# define SLSMG_COLOR_BRIGHT_WHITE	0x00000F
-#endif
-
-typedef struct
-{
-   void (*tt_normal_video)(void);
-   void (*tt_set_scroll_region)(int, int);
-   void (*tt_goto_rc)(int, int);
-   void (*tt_reverse_index)(int);
-   void (*tt_reset_scroll_region)(void);
-   void (*tt_delete_nlines)(int);
-   void (*tt_cls) (void);
-   void (*tt_del_eol) (void);
-   void (*tt_smart_puts) (SLsmg_Char_Type *, SLsmg_Char_Type *, int, int);
-   int (*tt_flush_output) (void);
-   int (*tt_reset_video) (void);
-   int (*tt_init_video) (void);
-
-   int *tt_screen_rows;
-   int *tt_screen_cols;
-
-   int *tt_term_cannot_scroll;
-   int *tt_has_alt_charset;
-   int *tt_use_blink_for_acs;
-   char **tt_graphic_char_pairs;
-
-   long reserved[4];
-}
-SLsmg_Term_Type;
-extern void SLsmg_set_terminal_info (SLsmg_Term_Type *);
-
-/*}}}*/
-
-/*{{{ SLang Keypad Interface */
-
-#define SL_KEY_ERR		0xFFFF
-
-#define SL_KEY_UP		0x101
-#define SL_KEY_DOWN		0x102
-#define SL_KEY_LEFT		0x103
-#define SL_KEY_RIGHT		0x104
-#define SL_KEY_PPAGE		0x105
-#define SL_KEY_NPAGE		0x106
-#define SL_KEY_HOME		0x107
-#define SL_KEY_END		0x108
-#define SL_KEY_A1		0x109
-#define SL_KEY_A3		0x10A
-#define SL_KEY_B2		0x10B
-#define SL_KEY_C1		0x10C
-#define SL_KEY_C3		0x10D
-#define SL_KEY_REDO		0x10E
-#define SL_KEY_UNDO		0x10F
-#define SL_KEY_BACKSPACE	0x110
-#define SL_KEY_ENTER		0x111
-#define SL_KEY_IC		0x112
-#define SL_KEY_DELETE		0x113
-
-#define SL_KEY_F0		0x200
-#define SL_KEY_F(X)		(SL_KEY_F0 + X)
-
-/* I do not intend to use keysymps > 0x1000.  Applications can use those. */
-/* Returns 0 upon success or -1 upon error. */
-extern int SLkp_define_keysym (char *, unsigned int);
-
-/* This function must be called AFTER SLtt_get_terminfo and not before. */
-extern int SLkp_init (void);
-
-/* This function uses SLang_getkey and assumes that what ever initialization
- * is required for SLang_getkey has been performed.
- */
-extern int SLkp_getkey (void);
-
-/*}}}*/
-
-/*{{{ SLang Scroll Interface */
-
-typedef struct _SLscroll_Type
-{
-   struct _SLscroll_Type *next;
-   struct _SLscroll_Type *prev;
-   unsigned int flags;
-}
-SLscroll_Type;
-
-typedef struct
-{
-   unsigned int flags;
-   SLscroll_Type *top_window_line;   /* list element at top of window */
-   SLscroll_Type *bot_window_line;   /* list element at bottom of window */
-   SLscroll_Type *current_line;    /* current list element */
-   SLscroll_Type *lines;	       /* first list element */
-   unsigned int nrows;		       /* number of rows in window */
-   unsigned int hidden_mask;	       /* applied to flags in SLscroll_Type */
-   unsigned int line_num;	       /* current line number (visible) */
-   unsigned int num_lines;	       /* total number of lines (visible) */
-   unsigned int window_row;	       /* row of current_line in window */
-   unsigned int border;		       /* number of rows that form scroll border */
-   int cannot_scroll;		       /* should window scroll or recenter */
-}
-SLscroll_Window_Type;
-
-extern int SLscroll_find_top (SLscroll_Window_Type *);
-extern int SLscroll_find_line_num (SLscroll_Window_Type *);
-extern unsigned int SLscroll_next_n (SLscroll_Window_Type *, unsigned int);
-extern unsigned int SLscroll_prev_n (SLscroll_Window_Type *, unsigned int);
-extern int SLscroll_pageup (SLscroll_Window_Type *);
-extern int SLscroll_pagedown (SLscroll_Window_Type *);
-
-/*}}}*/
-
-/*{{{ Signal Routines */
-
-typedef void SLSig_Fun_Type (int);
-extern SLSig_Fun_Type *SLsignal (int, SLSig_Fun_Type *);
-extern SLSig_Fun_Type *SLsignal_intr (int, SLSig_Fun_Type *);
-extern int SLsig_block_signals (void);
-extern int SLsig_unblock_signals (void);
-extern int SLsystem (char *);
-
-extern char *SLerrno_strerror (int);
-extern int SLerrno_set_errno (int);
-
-/*}}}*/
-
-/*{{{ Interpreter Macro Definitions */
-
-/* The definitions here are for objects that may be on the run-time stack.
- * They are actually sub_types of literal and data main_types.  The actual
- * numbers are historical.
- */
-#define SLANG_UNDEFINED_TYPE	0x00   /* MUST be 0 */
-#define SLANG_VOID_TYPE		0x01   /* also matches ANY type */
-#define SLANG_INT_TYPE 		0x02
-#define SLANG_DOUBLE_TYPE	0x03
-#define SLANG_CHAR_TYPE		0x04
-#define SLANG_INTP_TYPE		0x05
-/* An object of SLANG_INTP_TYPE should never really occur on the stack.  Rather,
- * the integer to which it refers will be there instead.  It is defined here
- * because it is a valid type for MAKE_VARIABLE.
- */
-#define SLANG_REF_TYPE		0x06
-/* SLANG_REF_TYPE refers to an object on the stack that is a pointer (reference)
- * to some other object.
- */
-#define SLANG_COMPLEX_TYPE	0x07
-#define SLANG_NULL_TYPE		0x08
-#define SLANG_UCHAR_TYPE	0x09
-#define SLANG_SHORT_TYPE	0x0A
-#define SLANG_USHORT_TYPE	0x0B
-#define SLANG_UINT_TYPE		0x0C
-#define SLANG_LONG_TYPE		0x0D
-#define SLANG_ULONG_TYPE	0x0E
-#define SLANG_STRING_TYPE	0x0F
-#define SLANG_FLOAT_TYPE	0x10
-#define SLANG_STRUCT_TYPE	0x11
-#define SLANG_ISTRUCT_TYPE 	0x12
-#define SLANG_ARRAY_TYPE	0x20
-#define SLANG_DATATYPE_TYPE	0x21
-#define SLANG_FILE_PTR_TYPE	0x22
-#define SLANG_ASSOC_TYPE	0x23
-#define SLANG_ANY_TYPE		0x24
-#define SLANG_BSTRING_TYPE	0x25
-#define SLANG_FILE_FD_TYPE	0x26
-
-/* Compatibility */
-#ifdef FLOAT_TYPE
-# undef FLOAT_TYPE
-#endif
-#define VOID_TYPE SLANG_VOID_TYPE
-#define INT_TYPE SLANG_INT_TYPE
-#define INTP_TYPE SLANG_INTP_TYPE
-#define FLOAT_TYPE SLANG_DOUBLE_TYPE
-#define ARRAY_TYPE SLANG_ARRAY_TYPE
-#define CHAR_TYPE SLANG_CHAR_TYPE
-#define STRING_TYPE SLANG_STRING_TYPE
-
-/* I am reserving values greater than or equal to 128 for user applications.
- * The first 127 are reserved for S-Lang.
- */
-
-/* Binary and Unary Subtypes */
-/* Since the application can define new types and can overload the binary
- * and unary operators, these definitions must be present in this file.
- * The current implementation assumes both unary and binary are distinct.
- */
-#define SLANG_PLUS		0x01
-#define SLANG_MINUS		0x02
-#define SLANG_TIMES		0x03
-#define SLANG_DIVIDE		0x04
-#define SLANG_EQ		0x05
-#define SLANG_NE		0x06
-#define SLANG_GT		0x07
-#define SLANG_GE		0x08
-#define SLANG_LT		0x09
-#define SLANG_LE		0x0A
-#define SLANG_POW		0x0B
-#define SLANG_OR		0x0C
-#define SLANG_AND		0x0D
-#define SLANG_BAND		0x0E
-#define SLANG_BOR		0x0F
-#define SLANG_BXOR		0x10
-#define SLANG_SHL		0x11
-#define SLANG_SHR		0x12
-#define SLANG_MOD		0x13
-
-/* UNARY subtypes  (may be overloaded) */
-#define SLANG_PLUSPLUS		0x20
-#define SLANG_MINUSMINUS	0x21
-#define SLANG_ABS		0x22
-#define SLANG_SIGN		0x23
-#define SLANG_SQR		0x24
-#define SLANG_MUL2		0x25
-#define SLANG_CHS		0x26
-#define SLANG_NOT		0x27
-#define SLANG_BNOT		0x28
-
-extern char *SLang_Error_Message;
-
-int SLadd_intrinsic_variable (char *, VOID_STAR, unsigned char, int);
-int SLadd_intrinsic_function (char *, FVOID_STAR, unsigned char, unsigned int,...);
-
-int SLns_add_intrinsic_variable (SLang_NameSpace_Type *, char *, VOID_STAR, unsigned char, int);
-int SLns_add_intrinsic_function (SLang_NameSpace_Type *, char *, FVOID_STAR, unsigned char, unsigned int,...);
-
-extern void SLadd_at_handler (long *, char *);
-
-#define MAKE_INTRINSIC_N(n,f,out,in,a1,a2,a3,a4,a5,a6,a7) \
-    {(n), NULL, SLANG_INTRINSIC, (FVOID_STAR) (f), \
-      {a1,a2,a3,a4,a5,a6,a7}, (in), (out)}
-
-#define MAKE_INTRINSIC_7(n,f,out,a1,a2,a3,a4,a5,a6,a7) \
-    MAKE_INTRINSIC_N(n,f,out,7,a1,a2,a3,a4,a5,a6,a7)
-#define MAKE_INTRINSIC_6(n,f,out,a1,a2,a3,a4,a5,a6) \
-    MAKE_INTRINSIC_N(n,f,out,6,a1,a2,a3,a4,a5,a6,0)
-#define MAKE_INTRINSIC_5(n,f,out,a1,a2,a3,a4,a5) \
-    MAKE_INTRINSIC_N(n,f,out,5,a1,a2,a3,a4,a5,0,0)
-#define MAKE_INTRINSIC_4(n,f,out,a1,a2,a3,a4) \
-    MAKE_INTRINSIC_N(n,f,out,4,a1,a2,a3,a4,0,0,0)
-#define MAKE_INTRINSIC_3(n,f,out,a1,a2,a3) \
-    MAKE_INTRINSIC_N(n,f,out,3,a1,a2,a3,0,0,0,0)
-#define MAKE_INTRINSIC_2(n,f,out,a1,a2) \
-    MAKE_INTRINSIC_N(n,f,out,2,a1,a2,0,0,0,0,0)
-#define MAKE_INTRINSIC_1(n,f,out,a1) \
-    MAKE_INTRINSIC_N(n,f,out,1,a1,0,0,0,0,0,0)
-#define MAKE_INTRINSIC_0(n,f,out) \
-    MAKE_INTRINSIC_N(n,f,out,0,0,0,0,0,0,0,0)
-
-#define MAKE_INTRINSIC_S(n,f,r) \
-   MAKE_INTRINSIC_1(n,f,r,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_I(n,f,r) \
-   MAKE_INTRINSIC_1(n,f,r,SLANG_INT_TYPE)
-
-#define MAKE_INTRINSIC_SS(n,f,r) \
-   MAKE_INTRINSIC_2(n,f,r,SLANG_STRING_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_SI(n,f,r) \
-   MAKE_INTRINSIC_2(n,f,r,SLANG_STRING_TYPE,SLANG_INT_TYPE)
-#define MAKE_INTRINSIC_IS(n,f,r) \
-   MAKE_INTRINSIC_2(n,f,r,SLANG_INT_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_II(n,f,r) \
-   MAKE_INTRINSIC_2(n,f,r,SLANG_INT_TYPE,SLANG_INT_TYPE)
-
-#define MAKE_INTRINSIC_SSS(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_STRING_TYPE,SLANG_STRING_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_SSI(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_STRING_TYPE,SLANG_STRING_TYPE,SLANG_INT_TYPE)
-#define MAKE_INTRINSIC_SIS(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_STRING_TYPE,SLANG_INT_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_SII(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_STRING_TYPE,SLANG_INT_TYPE,SLANG_INT_TYPE)
-#define MAKE_INTRINSIC_ISS(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_INT_TYPE,SLANG_STRING_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_ISI(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_INT_TYPE,SLANG_STRING_TYPE,SLANG_INT_TYPE)
-#define MAKE_INTRINSIC_IIS(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_INT_TYPE,SLANG_INT_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_III(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_INT_TYPE,SLANG_INT_TYPE,SLANG_INT_TYPE)
-
-#define MAKE_INTRINSIC(n, f, out, in) \
-    MAKE_INTRINSIC_N(n,f,out,in,0,0,0,0,0,0,0)
-
-#define MAKE_VARIABLE(n, v, t, r)     \
-    {n, NULL, SLANG_IVARIABLE + (r), (VOID_STAR)(v), (t)}
-
-#define MAKE_APP_UNARY(n,op) \
-    {(n), NULL, SLANG_APP_UNARY, (op)}
-
-#define MAKE_MATH_UNARY(n,op) \
-    {(n), NULL, SLANG_MATH_UNARY, (op)}
-
-#define MAKE_ICONSTANT(n,val) \
-    {(n),NULL, SLANG_ICONSTANT, (val)}
-
-#define MAKE_DCONSTANT(n,val) \
-    {(n),NULL, SLANG_DCONSTANT, (val)}
-
-#ifndef offsetof
-# define offsetof(T,F) ((unsigned int)((char *)&((T *)0L)->F - (char *)0L))
-#endif
-#define MAKE_ISTRUCT_FIELD(s,f,n,t,r) {(n), offsetof(s,f), (t), (r)}
-
-#define SLANG_END_TABLE {NULL}
-#define SLANG_END_INTRIN_FUN_TABLE MAKE_INTRINSIC_0(NULL,NULL,0)
-#define SLANG_END_DCONST_TABLE MAKE_DCONSTANT(NULL,0)
-#define SLANG_END_MATH_UNARY_TABLE MAKE_MATH_UNARY(NULL,0)
-#define SLANG_END_INTRIN_VAR_TABLE MAKE_VARIABLE(NULL,NULL,0,0)
-#define SLANG_END_ICONST_TABLE MAKE_ICONSTANT(NULL,0)
-#define SLANG_END_ISTRUCT_TABLE {NULL, 0, 0, 0}
-
-   
-
-/*}}}*/
-
-/*{{{ Upper/Lowercase Functions */
-
-extern void SLang_define_case(int *, int *);
-extern void SLang_init_case_tables (void);
-
-extern unsigned char _SLChg_UCase_Lut[256];
-extern unsigned char _SLChg_LCase_Lut[256];
-#define UPPER_CASE(x) (_SLChg_UCase_Lut[(unsigned char) (x)])
-#define LOWER_CASE(x) (_SLChg_LCase_Lut[(unsigned char) (x)])
-#define CHANGE_CASE(x) (((x) == _SLChg_LCase_Lut[(unsigned char) (x)]) ?\
-			_SLChg_UCase_Lut[(unsigned char) (x)] : _SLChg_LCase_Lut[(unsigned char) (x)])
-
-/*}}}*/
-
-/*{{{ Regular Expression Interface */
-
-typedef struct
-{
-   /* These must be set by calling routine. */
-   unsigned char *pat;		       /* regular expression pattern */
-   unsigned char *buf;		       /* buffer for compiled regexp */
-   unsigned int buf_len;	       /* length of buffer */
-   int case_sensitive;		       /* 1 if match is case sensitive  */
-
-   /* The rest are set by SLang_regexp_compile */
-
-   int must_match;		       /* 1 if line must contain substring */
-   int must_match_bol;		       /* true if it must match beginning of line */
-   unsigned char must_match_str[16];   /* 15 char null term substring */
-   int osearch;			       /* 1 if ordinary search suffices */
-   unsigned int min_length;	       /* minimum length the match must be */
-   int beg_matches[10];		       /* offset of start of \( */
-   unsigned int end_matches[10];       /* length of nth submatch
-					* Note that the entire match corresponds
-					* to \0
-					*/
-   int offset;			       /* offset to be added to beg_matches */
-   int reserved[10];
-} SLRegexp_Type;
-
-extern unsigned char *SLang_regexp_match(unsigned char *,
-					 unsigned int,
-					 SLRegexp_Type *);
-
-/* Returns 0 upon success.  If failure, the offset into the
- * pattern is returned (start = 1).
- */
-extern int SLang_regexp_compile (SLRegexp_Type *);
-extern char *SLregexp_quote_string (char *, char *, unsigned int);
-
-/*}}}*/
-
-/*{{{ SLang Command Interface */
-
-struct _SLcmd_Cmd_Type; /* Pre-declaration is needed below */
-typedef struct
-{
-   struct _SLcmd_Cmd_Type *table;
-   int argc;
-   /* Version 2.0 needs to use a union!! */
-   char **string_args;
-   int *int_args;
-   double *double_args;
-   unsigned char *arg_type;
-   unsigned long reserved[4];
-} SLcmd_Cmd_Table_Type;
-
-typedef struct _SLcmd_Cmd_Type
-{
-   int (*cmdfun)(int, SLcmd_Cmd_Table_Type *);
-   char *cmd;
-   char *arg_type;
-} SLcmd_Cmd_Type;
-
-extern int SLcmd_execute_string (char *, SLcmd_Cmd_Table_Type *);
-
-/*}}}*/
-
-/*{{{ SLang Search Interface */
-
-typedef struct
-{
-   int cs;			       /* case sensitive */
-   unsigned char key[256];
-   int ind[256];
-   int key_len;
-   int dir;
-} SLsearch_Type;
-
-extern int SLsearch_init (char *, int, int, SLsearch_Type *);
-/* This routine must first be called before any search can take place.
- * The second parameter specifies the direction of the search: greater than
- * zero for a forwrd search and less than zero for a backward search.  The
- * third parameter specifies whether the search is case sensitive or not.
- * The last parameter is a pointer to a structure that is filled by this
- * function and it is this structure that must be passed to SLsearch.
- */
-
-extern unsigned char *SLsearch (unsigned char *, unsigned char *, SLsearch_Type *);
-/* To use this routine, you must first call 'SLsearch_init'.  Then the first
- * two parameters p1 and p2 serve to define the region over which the search
- * is to take place.  The third parameter is the structure that was previously
- * initialized by SLsearch_init.
- *
- * The routine returns a pointer to the match if found otherwise it returns
- * NULL.
- */
-
-/*}}}*/
-
-/*{{{ SLang Pathname Interface */
-
-/* These function return pointers to the original space */
-extern char *SLpath_basename (char *);
-extern char *SLpath_extname (char *);
-extern int SLpath_is_absolute_path (char *);
-
-/* These return malloced strings--- NOT slstrings */
-extern char *SLpath_dircat (char *, char *);
-extern char *SLpath_find_file_in_path (char *, char *);
-extern char *SLpath_dirname (char *);
-extern int SLpath_file_exists (char *);
-extern char *SLpath_pathname_sans_extname (char *);
-
-/*}}}*/
-
-extern int SLang_set_module_load_path (char *);
-
-#define SLANG_MODULE(name) \
-   extern int init_##name##_module_ns (char *); \
-   extern void deinit_##name##_module (void)
-
-#if 0
-{
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-#endif  /* _DAVIS_SLANG_H_ */
diff --git a/mdk-stage1/slang/slarith.c b/mdk-stage1/slang/slarith.c
deleted file mode 100644
index 07ad68687..000000000
--- a/mdk-stage1/slang/slarith.c
+++ /dev/null
@@ -1,1656 +0,0 @@
-
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include <math.h>
-
-#ifdef HAVE_LOCALE_H
-# include <locale.h>
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-/*
- * This file defines binary and unary operations on all integer types.
- * Supported types include:
- *
- *    SLANG_CHAR_TYPE     (char)
- *    SLANG_SHORT_TYPE    (short)
- *    SLANG_INT_TYPE      (int)
- *    SLANG_LONG_TYPE     (long)
- *    SLANG_FLOAT_TYPE    (float)
- *    SLANG_DOUBLE_TYPE   (double)
- *
- * as well as unsigned types.  The result-type of an arithmentic operation
- * will depend upon the data types involved.  I am going to distinguish
- * between the boolean operations such as `and' and `or' from the arithmetic
- * operations such as `plus'.  Since the result of a boolean operation is
- * either 1 or 0, a boolean result will be represented by SLANG_CHAR_TYPE.
- * Ordinarily I would use an integer but for arrays it makes more sense to
- * use a character data type.
- *
- * So, the following will be assumed (`+' is any arithmetic operator)
- *
- *    char + char = int
- *    char|short + short = int
- *    char|short|int + int = int
- *    char|short|int|long + long = long
- *    char|short|int|long|float + float = float
- *    char|short|int|long|float|double + double = double
- *
- * In the actual implementation, a brute force approach is avoided.  Such
- * an approach would mean defining different functions for all possible
- * combinations of types.  Including the unsigned types, and not including
- * the complex number type, there are 10 arithmetic types and 10*10=100
- * different combinations of types.  Clearly this would be too much.
- *
- * One approach would be to define binary functions only between operands of
- * the same type and then convert types as appropriate.  This would require
- * just 6 such functions (int, uint, long, ulong, float, double).
- * However, many conversion functions are going to be required, particularly
- * since we are going to allow typecasting from one arithmetic to another.
- * Since the bit pattern of signed and unsigned types are the same, and only
- * the interpretation differs, there will be no functions to convert between
- * signed and unsigned forms of a given type.
- */
-
-#define MAX_ARITHMETIC_TYPES	10
-
-unsigned char _SLarith_Is_Arith_Type [256];
-
-unsigned char _SLarith_Arith_Types[] =
-{
-   SLANG_CHAR_TYPE,
-   SLANG_UCHAR_TYPE,
-   SLANG_SHORT_TYPE,
-   SLANG_USHORT_TYPE,
-   SLANG_INT_TYPE,
-   SLANG_UINT_TYPE,
-   SLANG_LONG_TYPE,
-   SLANG_ULONG_TYPE,
-   SLANG_FLOAT_TYPE,
-   SLANG_DOUBLE_TYPE,
-   0
-};
-
-/* Here are a bunch of functions to convert from one type to another.  To
- * facilitate the process, a macros will be used.
- */
-
-#define DEFUN_1(f,from_type,to_type) \
-static void f (to_type *y, from_type *x, unsigned int n) \
-{ \
-   unsigned int i; \
-   for (i = 0; i < n; i++) y[i] = (to_type) x[i]; \
-}
-
-#define DEFUN_2(f,from_type,to_type,copy_fun) \
-static VOID_STAR f (VOID_STAR xp, unsigned int n) \
-{ \
-   from_type *x; \
-   to_type *y; \
-   x = (from_type *) xp; \
-   if (NULL == (y = (to_type *) SLmalloc (sizeof (to_type) * n))) return NULL; \
-   copy_fun (y, x, n); \
-   return (VOID_STAR) y; \
-}
-typedef VOID_STAR (*Convert_Fun_Type)(VOID_STAR, unsigned int);
-
-DEFUN_1(copy_char_to_char,char,char)
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_char_to_short,char,short)
-DEFUN_1(copy_char_to_ushort,char,unsigned short)
-#else
-# define copy_char_to_short	copy_char_to_int
-# define copy_char_to_ushort	copy_char_to_uint
-#endif
-DEFUN_1(copy_char_to_int,char,int)
-DEFUN_1(copy_char_to_uint,char,unsigned int)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_char_to_long,char,long)
-DEFUN_1(copy_char_to_ulong,char,unsigned long)
-#else
-# define copy_char_to_long	copy_char_to_int
-# define copy_char_to_ulong	copy_char_to_uint
-#endif
-DEFUN_1(copy_char_to_float,char,float)
-DEFUN_1(copy_char_to_double,char,double)
-
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_uchar_to_short,unsigned char,short)
-DEFUN_1(copy_uchar_to_ushort,unsigned char,unsigned short)
-#else
-# define copy_uchar_to_short	copy_uchar_to_int
-# define copy_uchar_to_ushort	copy_uchar_to_uint
-#endif
-DEFUN_1(copy_uchar_to_int,unsigned char,int)
-DEFUN_1(copy_uchar_to_uint,unsigned char,unsigned int)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_uchar_to_long,unsigned char,long)
-DEFUN_1(copy_uchar_to_ulong,unsigned char,unsigned long)
-#else
-# define copy_uchar_to_long	copy_uchar_to_int
-# define copy_uchar_to_ulong	copy_uchar_to_uint
-#endif
-DEFUN_1(copy_uchar_to_float,unsigned char,float)
-DEFUN_1(copy_uchar_to_double,unsigned char,double)
-
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_short_to_char,short,char)
-DEFUN_1(copy_short_to_uchar,short,unsigned char)
-DEFUN_1(copy_short_to_short,short,short)
-DEFUN_1(copy_short_to_int,short,int)
-DEFUN_1(copy_short_to_uint,short,unsigned int)
-DEFUN_1(copy_short_to_long,short,long)
-DEFUN_1(copy_short_to_ulong,short,unsigned long)
-DEFUN_1(copy_short_to_float,short,float)
-DEFUN_1(copy_short_to_double,short,double)
-DEFUN_1(copy_ushort_to_char,unsigned short,char)
-DEFUN_1(copy_ushort_to_uchar,unsigned short,unsigned char)
-DEFUN_1(copy_ushort_to_int,unsigned short,int)
-DEFUN_1(copy_ushort_to_uint,unsigned short,unsigned int)
-DEFUN_1(copy_ushort_to_long,unsigned short,long)
-DEFUN_1(copy_ushort_to_ulong,unsigned short,unsigned long)
-DEFUN_1(copy_ushort_to_float,unsigned short,float)
-DEFUN_1(copy_ushort_to_double,unsigned short,double)
-#else
-# define copy_short_to_char	copy_int_to_char
-# define copy_short_to_uchar	copy_int_to_uchar
-# define copy_short_to_short	copy_int_to_int
-# define copy_short_to_int	copy_int_to_int
-# define copy_short_to_uint	copy_int_to_int
-# define copy_short_to_long	copy_int_to_long
-# define copy_short_to_ulong	copy_int_to_ulong
-# define copy_short_to_float	copy_int_to_float
-# define copy_short_to_double	copy_int_to_double
-# define copy_ushort_to_char	copy_uint_to_char
-# define copy_ushort_to_uchar	copy_uint_to_uchar
-# define copy_ushort_to_int	copy_int_to_int
-# define copy_ushort_to_uint	copy_int_to_int
-# define copy_ushort_to_long	copy_uint_to_long
-# define copy_ushort_to_ulong	copy_uint_to_ulong
-# define copy_ushort_to_float	copy_uint_to_float
-# define copy_ushort_to_double	copy_uint_to_double
-#endif
-
-DEFUN_1(copy_int_to_char,int,char)
-DEFUN_1(copy_int_to_uchar,int,unsigned char)
-DEFUN_1(copy_uint_to_char,unsigned int,char)
-DEFUN_1(copy_uint_to_uchar,unsigned int,unsigned char)
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_int_to_short,int,short)
-DEFUN_1(copy_int_to_ushort,int,unsigned short)
-DEFUN_1(copy_uint_to_short,unsigned int,short)
-DEFUN_1(copy_uint_to_ushort,unsigned int,unsigned short)
-#else
-# define copy_int_to_short	copy_int_to_int
-# define copy_int_to_ushort	copy_int_to_int
-# define copy_uint_to_short	copy_int_to_int
-# define copy_uint_to_ushort	copy_int_to_int
-#endif
-DEFUN_1(copy_int_to_int,int,int)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_int_to_long,int,long)
-DEFUN_1(copy_int_to_ulong,int,unsigned long)
-DEFUN_1(copy_uint_to_long,unsigned int,long)
-DEFUN_1(copy_uint_to_ulong,unsigned int,unsigned long)
-#else
-# define copy_int_to_long	copy_int_to_int
-# define copy_int_to_ulong	copy_int_to_int
-# define copy_uint_to_long	copy_int_to_int
-# define copy_uint_to_ulong	copy_int_to_int
-#endif
-DEFUN_1(copy_int_to_float,int,float)
-DEFUN_1(copy_int_to_double,int,double)
-DEFUN_1(copy_uint_to_float,unsigned int,float)
-DEFUN_1(copy_uint_to_double,unsigned int,double)
-
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_long_to_char,long,char)
-DEFUN_1(copy_long_to_uchar,long,unsigned char)
-DEFUN_1(copy_long_to_short,long,short)
-DEFUN_1(copy_long_to_ushort,long,unsigned short)
-DEFUN_1(copy_long_to_int,long,int)
-DEFUN_1(copy_long_to_uint,long,unsigned int)
-DEFUN_1(copy_long_to_long,long,long)
-DEFUN_1(copy_long_to_float,long,float)
-DEFUN_1(copy_long_to_double,long,double)
-DEFUN_1(copy_ulong_to_char,unsigned long,char)
-DEFUN_1(copy_ulong_to_uchar,unsigned long,unsigned char)
-DEFUN_1(copy_ulong_to_short,unsigned long,short)
-DEFUN_1(copy_ulong_to_ushort,unsigned long,unsigned short)
-DEFUN_1(copy_ulong_to_int,unsigned long,int)
-DEFUN_1(copy_ulong_to_uint,unsigned long,unsigned int)
-DEFUN_1(copy_ulong_to_float,unsigned long,float)
-DEFUN_1(copy_ulong_to_double,unsigned long,double)
-#else
-#define copy_long_to_char	copy_int_to_char
-#define copy_long_to_uchar	copy_int_to_uchar
-#define copy_long_to_short	copy_int_to_short
-#define copy_long_to_ushort	copy_int_to_ushort
-#define copy_long_to_int	copy_int_to_int
-#define copy_long_to_uint	copy_int_to_int
-#define copy_long_to_long	copy_int_to_int
-#define copy_long_to_float	copy_int_to_float
-#define copy_long_to_double	copy_int_to_double
-#define copy_ulong_to_char	copy_uint_to_char
-#define copy_ulong_to_uchar	copy_uint_to_uchar
-#define copy_ulong_to_short	copy_uint_to_short
-#define copy_ulong_to_ushort	copy_uint_to_ushort
-#define copy_ulong_to_int	copy_int_to_int
-#define copy_ulong_to_uint	copy_int_to_int
-#define copy_ulong_to_float	copy_uint_to_float
-#define copy_ulong_to_double	copy_uint_to_double
-#endif
-
-DEFUN_1(copy_float_to_char,float,char)
-DEFUN_1(copy_float_to_uchar,float,unsigned char)
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_float_to_short,float,short)
-DEFUN_1(copy_float_to_ushort,float,unsigned short)
-#else
-# define copy_float_to_short	copy_float_to_int
-# define copy_float_to_ushort	copy_float_to_uint
-#endif
-DEFUN_1(copy_float_to_int,float,int)
-DEFUN_1(copy_float_to_uint,float,unsigned int)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_float_to_long,float,long)
-DEFUN_1(copy_float_to_ulong,float,unsigned long)
-#else
-# define copy_float_to_long	copy_float_to_int
-# define copy_float_to_ulong	copy_float_to_uint
-#endif
-DEFUN_1(copy_float_to_float,float,float)
-DEFUN_1(copy_float_to_double,float,double)
-
-DEFUN_1(copy_double_to_char,double,char)
-DEFUN_1(copy_double_to_uchar,double,unsigned char)
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_double_to_short,double,short)
-DEFUN_1(copy_double_to_ushort,double,unsigned short)
-#else
-# define copy_double_to_short	copy_double_to_int
-# define copy_double_to_ushort	copy_double_to_uint
-#endif
-DEFUN_1(copy_double_to_int,double,int)
-DEFUN_1(copy_double_to_uint,double,unsigned int)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_double_to_long,double,long)
-DEFUN_1(copy_double_to_ulong,double,unsigned long)
-#else
-# define copy_double_to_long	copy_double_to_int
-# define copy_double_to_ulong	copy_double_to_uint
-#endif
-DEFUN_1(copy_double_to_float,double,float)
-DEFUN_1(copy_double_to_double,double,double)
-
-DEFUN_2(char_to_int,char,int,copy_char_to_int)
-DEFUN_2(char_to_uint,char,unsigned int,copy_char_to_uint)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_2(char_to_long,char,long,copy_char_to_long)
-DEFUN_2(char_to_ulong,char,unsigned long,copy_char_to_ulong)
-#else
-# define char_to_long	char_to_int
-# define char_to_ulong	char_to_uint
-#endif
-DEFUN_2(char_to_float,char,float,copy_char_to_float)
-DEFUN_2(char_to_double,char,double,copy_char_to_double)
-
-DEFUN_2(uchar_to_int,unsigned char,int,copy_uchar_to_int)
-DEFUN_2(uchar_to_uint,unsigned char,unsigned int,copy_uchar_to_uint)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_2(uchar_to_long,unsigned char,long,copy_uchar_to_long)
-DEFUN_2(uchar_to_ulong,unsigned char,unsigned long,copy_uchar_to_ulong)
-#else
-# define uchar_to_long		uchar_to_int
-# define uchar_to_ulong		uchar_to_uint
-#endif
-DEFUN_2(uchar_to_float,unsigned char,float,copy_uchar_to_float)
-DEFUN_2(uchar_to_double,unsigned char,double,copy_uchar_to_double)
-
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_2(short_to_int,short,int,copy_short_to_int)
-DEFUN_2(short_to_uint,short,unsigned int,copy_short_to_uint)
-DEFUN_2(short_to_long,short,long,copy_short_to_long)
-DEFUN_2(short_to_ulong,short,unsigned long,copy_short_to_ulong)
-DEFUN_2(short_to_float,short,float,copy_short_to_float)
-DEFUN_2(short_to_double,short,double,copy_short_to_double)
-DEFUN_2(ushort_to_int,unsigned short,int,copy_ushort_to_int)
-DEFUN_2(ushort_to_uint,unsigned short,unsigned int,copy_ushort_to_uint)
-DEFUN_2(ushort_to_long,unsigned short,long,copy_ushort_to_long)
-DEFUN_2(ushort_to_ulong,unsigned short,unsigned long,copy_ushort_to_ulong)
-DEFUN_2(ushort_to_float,unsigned short,float,copy_ushort_to_float)
-DEFUN_2(ushort_to_double,unsigned short,double,copy_ushort_to_double)
-#else
-# define short_to_int		NULL
-# define short_to_uint		NULL
-# define short_to_long		int_to_long
-# define short_to_ulong		int_to_ulong
-# define short_to_float		int_to_float
-# define short_to_double	int_to_double
-# define ushort_to_int		NULL
-# define ushort_to_uint		NULL
-# define ushort_to_long		uint_to_long
-# define ushort_to_ulong	uint_to_ulong
-# define ushort_to_float	uint_to_float
-# define ushort_to_double	uint_to_double
-#endif
-
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_2(int_to_long,int,long,copy_int_to_long)
-DEFUN_2(int_to_ulong,int,unsigned long,copy_int_to_ulong)
-#else
-# define int_to_long		NULL
-# define int_to_ulong		NULL
-#endif
-DEFUN_2(int_to_float,int,float,copy_int_to_float)
-DEFUN_2(int_to_double,int,double,copy_int_to_double)
-
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_2(uint_to_long,unsigned int,long,copy_uint_to_long)
-DEFUN_2(uint_to_ulong,unsigned int,unsigned long,copy_uint_to_ulong)
-#else
-# define uint_to_long		NULL
-# define uint_to_ulong		NULL
-#endif
-DEFUN_2(uint_to_float,unsigned int,float,copy_uint_to_float)
-DEFUN_2(uint_to_double,unsigned int,double,copy_uint_to_double)
-
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_2(long_to_float,long,float,copy_long_to_float)
-DEFUN_2(long_to_double,long,double,copy_long_to_double)
-DEFUN_2(ulong_to_float,unsigned long,float,copy_ulong_to_float)
-DEFUN_2(ulong_to_double,unsigned long,double,copy_ulong_to_double)
-#else
-# define long_to_float		int_to_float
-# define long_to_double		int_to_double
-# define ulong_to_float		uint_to_float
-# define ulong_to_double	uint_to_double
-#endif
-
-DEFUN_2(float_to_double,float,double,copy_float_to_double)
-
-#define TO_DOUBLE_FUN(name,type) \
-static double name (VOID_STAR x) { return (double) *(type *) x; }
-TO_DOUBLE_FUN(char_to_one_double,char)
-TO_DOUBLE_FUN(uchar_to_one_double,unsigned char)
-#if SIZEOF_INT != SIZEOF_SHORT
-TO_DOUBLE_FUN(short_to_one_double,short)
-TO_DOUBLE_FUN(ushort_to_one_double,unsigned short)
-#else
-# define short_to_one_double	int_to_one_double
-# define ushort_to_one_double	uint_to_one_double
-#endif
-TO_DOUBLE_FUN(int_to_one_double,int)
-TO_DOUBLE_FUN(uint_to_one_double,unsigned int)
-#if SIZEOF_INT != SIZEOF_LONG
-TO_DOUBLE_FUN(long_to_one_double,long)
-TO_DOUBLE_FUN(ulong_to_one_double,unsigned long)
-#else
-# define long_to_one_double	int_to_one_double
-# define ulong_to_one_double	uint_to_one_double
-#endif
-TO_DOUBLE_FUN(float_to_one_double,float)
-TO_DOUBLE_FUN(double_to_one_double,double)
-
-SLang_To_Double_Fun_Type
-SLarith_get_to_double_fun (unsigned char type, unsigned int *sizeof_type)
-{
-   unsigned int da;
-   SLang_To_Double_Fun_Type to_double;
-
-   switch (type)
-     {
-      default:
-	return NULL;
-
-      case SLANG_CHAR_TYPE:
-	da = sizeof (char); to_double = char_to_one_double;
-	break;
-      case SLANG_UCHAR_TYPE:
-	da = sizeof (unsigned char); to_double = uchar_to_one_double;
-	break;
-      case SLANG_SHORT_TYPE:
-	da = sizeof (short); to_double = short_to_one_double;
-	break;
-      case SLANG_USHORT_TYPE:
-	da = sizeof (unsigned short); to_double = ushort_to_one_double;
-	break;
-      case SLANG_INT_TYPE:
-	da = sizeof (int); to_double = int_to_one_double;
-	break;
-      case SLANG_UINT_TYPE:
-	da = sizeof (unsigned int); to_double = uint_to_one_double;
-	break;
-      case SLANG_LONG_TYPE:
-	da = sizeof (long); to_double = long_to_one_double;
-	break;
-      case SLANG_ULONG_TYPE:
-	da = sizeof (unsigned long); to_double = ulong_to_one_double;
-	break;
-      case SLANG_FLOAT_TYPE:
-	da = sizeof (float); to_double = float_to_one_double;
-	break;
-     case SLANG_DOUBLE_TYPE:
-	da = sizeof (double); to_double = double_to_one_double;
-	break;
-     }
-
-   if (sizeof_type != NULL) *sizeof_type = da;
-   return to_double;
-}
-
-/* Each element of the matrix determines how the row maps onto the column.
- * That is, let the matrix be B_ij.  Where the i,j indices refer to
- * precedence of the type.  Then,
- * B_ij->copy_function copies type i to type j.  Similarly,
- * B_ij->convert_function mallocs a new array of type j and copies i to it.
- *
- * Since types are always converted to higher levels of precedence for binary
- * operations, many of the elements are NULL.
- *
- * Is the idea clear?
- */
-typedef struct
-{
-   FVOID_STAR copy_function;
-   Convert_Fun_Type convert_function;
-}
-Binary_Matrix_Type;
-
-static Binary_Matrix_Type Binary_Matrix [MAX_ARITHMETIC_TYPES][MAX_ARITHMETIC_TYPES] =
-{
-     {
-	  {(FVOID_STAR)copy_char_to_char, NULL},
-	  {(FVOID_STAR)copy_char_to_char, NULL},
-	{(FVOID_STAR) copy_char_to_short, NULL},
-	{(FVOID_STAR) copy_char_to_ushort, NULL},
-	{(FVOID_STAR) copy_char_to_int, char_to_int},
-	{(FVOID_STAR) copy_char_to_uint, char_to_uint},
-	{(FVOID_STAR) copy_char_to_long, char_to_long},
-	{(FVOID_STAR) copy_char_to_ulong, char_to_ulong},
-	{(FVOID_STAR) copy_char_to_float, char_to_float},
-	{(FVOID_STAR) copy_char_to_double, char_to_double},
-     },
-
-     {
-	  {(FVOID_STAR)copy_char_to_char, NULL},
-	  {(FVOID_STAR)copy_char_to_char, NULL},
-	{(FVOID_STAR) copy_uchar_to_short, NULL},
-	{(FVOID_STAR) copy_uchar_to_ushort, NULL},
-	{(FVOID_STAR) copy_uchar_to_int, uchar_to_int},
-	{(FVOID_STAR) copy_uchar_to_uint, uchar_to_uint},
-	{(FVOID_STAR) copy_uchar_to_long, uchar_to_long},
-	{(FVOID_STAR) copy_uchar_to_ulong, uchar_to_ulong},
-	{(FVOID_STAR) copy_uchar_to_float, uchar_to_float},
-	{(FVOID_STAR) copy_uchar_to_double, uchar_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_short_to_char, NULL},
-	{(FVOID_STAR) copy_short_to_uchar, NULL},
-	{(FVOID_STAR) copy_short_to_short, NULL},
-	{(FVOID_STAR) copy_short_to_short, NULL},
-	{(FVOID_STAR) copy_short_to_int, short_to_int},
-	{(FVOID_STAR) copy_short_to_uint, short_to_uint},
-	{(FVOID_STAR) copy_short_to_long, short_to_long},
-	{(FVOID_STAR) copy_short_to_ulong, short_to_ulong},
-	{(FVOID_STAR) copy_short_to_float, short_to_float},
-	{(FVOID_STAR) copy_short_to_double, short_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_ushort_to_char, NULL},
-	{(FVOID_STAR) copy_ushort_to_uchar, NULL},
-	{(FVOID_STAR) copy_short_to_short, NULL},
-	{(FVOID_STAR) copy_short_to_short, NULL},
-	{(FVOID_STAR) copy_ushort_to_int, ushort_to_int},
-	{(FVOID_STAR) copy_ushort_to_uint, ushort_to_uint},
-	{(FVOID_STAR) copy_ushort_to_long, ushort_to_long},
-	{(FVOID_STAR) copy_ushort_to_ulong, ushort_to_ulong},
-	{(FVOID_STAR) copy_ushort_to_float, ushort_to_float},
-	{(FVOID_STAR) copy_ushort_to_double, ushort_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_int_to_char, NULL},
-	{(FVOID_STAR) copy_int_to_uchar, NULL},
-	{(FVOID_STAR) copy_int_to_short, NULL},
-	{(FVOID_STAR) copy_int_to_ushort, NULL},
-	{(FVOID_STAR) copy_int_to_int, NULL},
-	{(FVOID_STAR) copy_int_to_int, NULL},
-	{(FVOID_STAR) copy_int_to_long, int_to_long},
-	{(FVOID_STAR) copy_int_to_ulong, int_to_ulong},
-	{(FVOID_STAR) copy_int_to_float, int_to_float},
-	{(FVOID_STAR) copy_int_to_double, int_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_uint_to_char, NULL},
-	{(FVOID_STAR) copy_uint_to_uchar, NULL},
-	{(FVOID_STAR) copy_uint_to_short, NULL},
-	{(FVOID_STAR) copy_uint_to_ushort, NULL},
-	{(FVOID_STAR) copy_int_to_int, NULL},
-	{(FVOID_STAR) copy_int_to_int, NULL},
-	{(FVOID_STAR) copy_uint_to_long, uint_to_long},
-	{(FVOID_STAR) copy_uint_to_ulong, uint_to_ulong},
-	{(FVOID_STAR) copy_uint_to_float, uint_to_float},
-	{(FVOID_STAR) copy_uint_to_double, uint_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_long_to_char, NULL},
-	{(FVOID_STAR) copy_long_to_uchar, NULL},
-	{(FVOID_STAR) copy_long_to_short, NULL},
-	{(FVOID_STAR) copy_long_to_ushort, NULL},
-	{(FVOID_STAR) copy_long_to_int, NULL},
-	{(FVOID_STAR) copy_long_to_uint, NULL},
-	{(FVOID_STAR) copy_long_to_long, NULL},
-	{(FVOID_STAR) copy_long_to_long, NULL},
-	{(FVOID_STAR) copy_long_to_float, long_to_float},
-	{(FVOID_STAR) copy_long_to_double, long_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_ulong_to_char, NULL},
-	{(FVOID_STAR) copy_ulong_to_uchar, NULL},
-	{(FVOID_STAR) copy_ulong_to_short, NULL},
-	{(FVOID_STAR) copy_ulong_to_ushort, NULL},
-	{(FVOID_STAR) copy_ulong_to_int, NULL},
-	{(FVOID_STAR) copy_ulong_to_uint, NULL},
-	{(FVOID_STAR) copy_long_to_long, NULL},
-	{(FVOID_STAR) copy_long_to_long, NULL},
-	{(FVOID_STAR) copy_ulong_to_float, ulong_to_float},
-	{(FVOID_STAR) copy_ulong_to_double, ulong_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_float_to_char, NULL},
-	{(FVOID_STAR) copy_float_to_uchar, NULL},
-	{(FVOID_STAR) copy_float_to_short, NULL},
-	{(FVOID_STAR) copy_float_to_ushort, NULL},
-	{(FVOID_STAR) copy_float_to_int, NULL},
-	{(FVOID_STAR) copy_float_to_uint, NULL},
-	{(FVOID_STAR) copy_float_to_long, NULL},
-	{(FVOID_STAR) copy_float_to_ulong, NULL},
-	{(FVOID_STAR) copy_float_to_float, NULL},
-	{(FVOID_STAR) copy_float_to_double, float_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_double_to_char, NULL},
-	{(FVOID_STAR) copy_double_to_uchar, NULL},
-	{(FVOID_STAR) copy_double_to_short, NULL},
-	{(FVOID_STAR) copy_double_to_ushort, NULL},
-	{(FVOID_STAR) copy_double_to_int, NULL},
-	{(FVOID_STAR) copy_double_to_uint, NULL},
-	{(FVOID_STAR) copy_double_to_long, NULL},
-	{(FVOID_STAR) copy_double_to_ulong, NULL},
-	{(FVOID_STAR) copy_double_to_float, NULL},
-	{(FVOID_STAR) copy_double_to_double, NULL},
-     }
-};
-
-#define GENERIC_BINARY_FUNCTION int_int_bin_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE int
-#define POW_FUNCTION(a,b) pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE double
-#define ABS_FUNCTION abs
-#define MOD_FUNCTION(a,b) ((a) % (b))
-#define GENERIC_UNARY_FUNCTION int_unary_op
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define SCALAR_BINARY_FUNCTION int_int_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_int_obj(SLANG_INT_TYPE,(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE, (x))
-#define CMP_FUNCTION int_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_BINARY_FUNCTION uint_uint_bin_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE unsigned int
-#define POW_FUNCTION(a,b) pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE double
-#define MOD_FUNCTION(a,b) ((a) % (b))
-#define GENERIC_UNARY_FUNCTION uint_unary_op
-#define ABS_FUNCTION(a) (a)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : 0)
-#define SCALAR_BINARY_FUNCTION uint_uint_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_int_obj(SLANG_UINT_TYPE,(int)(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE, (x))
-#define CMP_FUNCTION uint_cmp_function
-#include "slarith.inc"
-
-#if SIZEOF_LONG != SIZEOF_INT
-#define GENERIC_BINARY_FUNCTION long_long_bin_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE long
-#define POW_FUNCTION(a,b) pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE double
-#define MOD_FUNCTION(a,b) ((a) % (b))
-#define GENERIC_UNARY_FUNCTION long_unary_op
-#define ABS_FUNCTION(a) (((a) >= 0) ? (a) : -(a))
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define SCALAR_BINARY_FUNCTION long_long_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_long_obj(SLANG_LONG_TYPE,(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE, (x))
-#define CMP_FUNCTION long_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_BINARY_FUNCTION ulong_ulong_bin_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE unsigned long
-#define POW_FUNCTION(a,b) pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE double
-#define MOD_FUNCTION(a,b) ((a) % (b))
-#define GENERIC_UNARY_FUNCTION ulong_unary_op
-#define ABS_FUNCTION(a) (a)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : 0)
-#define SCALAR_BINARY_FUNCTION ulong_ulong_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_long_obj(SLANG_ULONG_TYPE,(long)(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE, (x))
-#define CMP_FUNCTION ulong_cmp_function
-#include "slarith.inc"
-#else
-#define long_long_bin_op	int_int_bin_op
-#define ulong_ulong_bin_op	uint_uint_bin_op
-#define long_unary_op		int_unary_op
-#define ulong_unary_op		uint_unary_op
-#define long_cmp_function	int_cmp_function
-#define ulong_cmp_function	uint_cmp_function
-#endif				       /* SIZEOF_INT != SIZEOF_LONG */
-
-#define GENERIC_BINARY_FUNCTION float_float_bin_op
-#define GENERIC_TYPE float
-#define POW_FUNCTION(a,b) (float)pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE float
-#define MOD_FUNCTION(a,b) (float)fmod((a),(b))
-#define GENERIC_UNARY_FUNCTION float_unary_op
-#define ABS_FUNCTION(a) (float)fabs((double) a)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define SCALAR_BINARY_FUNCTION float_float_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_float_obj(SLANG_FLOAT_TYPE,(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_float_obj(SLANG_FLOAT_TYPE, (x))
-#define CMP_FUNCTION float_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_BINARY_FUNCTION double_double_bin_op
-#define GENERIC_TYPE double
-#define POW_FUNCTION(a,b) pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE double
-#define MOD_FUNCTION(a,b) (float)fmod((a),(b))
-#define GENERIC_UNARY_FUNCTION double_unary_op
-#define ABS_FUNCTION(a) fabs(a)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define SCALAR_BINARY_FUNCTION double_double_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE,(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE, (x))
-#define CMP_FUNCTION double_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_UNARY_FUNCTION char_unary_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE signed char
-#define ABS_FUNCTION abs
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define CMP_FUNCTION char_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_UNARY_FUNCTION uchar_unary_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE unsigned char
-#define ABS_FUNCTION(x) (x)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : 0)
-#define CMP_FUNCTION uchar_cmp_function
-#include "slarith.inc"
-
-#if SIZEOF_SHORT != SIZEOF_INT
-#define GENERIC_UNARY_FUNCTION short_unary_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE short
-#define ABS_FUNCTION abs
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define CMP_FUNCTION short_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_UNARY_FUNCTION ushort_unary_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE unsigned short
-#define ABS_FUNCTION(x) (x)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : 0)
-#define CMP_FUNCTION ushort_cmp_function
-#include "slarith.inc"
-#endif				       /* SIZEOF_INT != SIZEOF_SHORT */
-
-/* Unfortunately, the numbers that were assigned to the data-types were
- * not well thought out.  So, I need to use the following table.
- */
-#define MAXIMUM_ARITH_TYPE_VALUE	SLANG_FLOAT_TYPE
-#define IS_INTEGER_TYPE(x) \
-  (((x) <= MAXIMUM_ARITH_TYPE_VALUE) \
-      && (Type_Precedence_Table[x] < 8) && (Type_Precedence_Table[x] != -1))
-#define IS_ARITHMETIC_TYPE(x) \
-  (((x) <= MAXIMUM_ARITH_TYPE_VALUE) && (Type_Precedence_Table[x] != -1))
-
-#define LONG_PRECEDENCE_VALUE	6
-#define FLOAT_PRECEDENCE_VALUE	8
-
-static signed char Type_Precedence_Table [MAXIMUM_ARITH_TYPE_VALUE + 1] =
-{
-   -1,				       /* SLANG_UNDEFINED_TYPE */
-   -1,				       /* SLANG_VOID_TYPE */
-   4,				       /* SLANG_INT_TYPE */
-   9,				       /* SLANG_DOUBLE_TYPE */
-   0,				       /* SLANG_CHAR_TYPE */
-   -1,				       /* SLANG_INTP_TYPE */
-   -1,				       /* SLANG_REF_TYPE */
-   -1,				       /* SLANG_COMPLEX_TYPE */
-   -1,				       /* SLANG_NULL_TYPE */
-   1,				       /* SLANG_UCHAR_TYPE */
-   2,				       /* SLANG_SHORT_TYPE */
-   3,				       /* SLANG_USHORT_TYPE */
-   5,				       /* SLANG_UINT_TYPE */
-   6,				       /* SLANG_LONG_TYPE */
-   7,				       /* SLANG_ULONG_TYPE */
-   -1,				       /* SLANG_STRING_TYPE */
-   8				       /* SLANG_FLOAT_TYPE */
-};
-
-int _SLarith_get_precedence (unsigned char type)
-{
-   if (type > MAXIMUM_ARITH_TYPE_VALUE)
-     return -1;
-
-   return Type_Precedence_Table[type];
-}
-
-unsigned char _SLarith_promote_type (unsigned char t)
-{
-   switch (t)
-     {
-      case SLANG_FLOAT_TYPE:
-      case SLANG_DOUBLE_TYPE:
-      case SLANG_LONG_TYPE:
-      case SLANG_ULONG_TYPE:
-      case SLANG_INT_TYPE:
-      case SLANG_UINT_TYPE:
-	break;
-
-      case SLANG_USHORT_TYPE:
-#if SIZEOF_INT == SIZEOF_SHORT
-	t = SLANG_UINT_TYPE;
-	break;
-#endif
-	/* drop */
-      case SLANG_CHAR_TYPE:
-      case SLANG_UCHAR_TYPE:
-      case SLANG_SHORT_TYPE:
-      default:
-	t = SLANG_INT_TYPE;
-     }
-
-   return t;
-}
-
-static unsigned char promote_to_common_type (unsigned char a, unsigned char b)
-{
-   a = _SLarith_promote_type (a);
-   b = _SLarith_promote_type (b);
-
-   return (Type_Precedence_Table[a] > Type_Precedence_Table[b]) ? a : b;
-}
-
-static int arith_bin_op_result (int op, unsigned char a_type, unsigned char b_type,
-				unsigned char *c_type)
-{
-   switch (op)
-     {
-      case SLANG_EQ:
-      case SLANG_NE:
-      case SLANG_GT:
-      case SLANG_GE:
-      case SLANG_LT:
-      case SLANG_LE:
-      case SLANG_OR:
-      case SLANG_AND:
-	*c_type = SLANG_CHAR_TYPE;
-	return 1;
-
-      case SLANG_POW:
-	if (SLANG_FLOAT_TYPE == promote_to_common_type (a_type, b_type))
-	  *c_type = SLANG_FLOAT_TYPE;
-	else
-	  *c_type = SLANG_DOUBLE_TYPE;
-	return 1;
-
-      case SLANG_BAND:
-      case SLANG_BXOR:
-      case SLANG_BOR:
-      case SLANG_SHL:
-      case SLANG_SHR:
-	/* The bit-level operations are defined just for integer types */
-	if ((0 == IS_INTEGER_TYPE (a_type))
-	    || (0 == IS_INTEGER_TYPE(b_type)))
-	  return 0;
-	break;
-
-      default:
-	break;
-     }
-
-   *c_type = promote_to_common_type (a_type, b_type);
-   return 1;
-}
-
-typedef int (*Bin_Fun_Type) (int,
-			     unsigned char, VOID_STAR, unsigned int,
-			     unsigned char, VOID_STAR, unsigned int,
-			     VOID_STAR);
-
-/* This array of functions must be indexed by precedence after arithmetic
- * promotions.
- */
-static Bin_Fun_Type Bin_Fun_Map [MAX_ARITHMETIC_TYPES] =
-{
-   NULL,
-   NULL,
-   NULL,
-   NULL,
-   int_int_bin_op,
-   uint_uint_bin_op,
-   long_long_bin_op,
-   ulong_ulong_bin_op,
-   float_float_bin_op,
-   double_double_bin_op
-};
-
-static int arith_bin_op (int op,
-			 unsigned char a_type, VOID_STAR ap, unsigned int na,
-			 unsigned char b_type, VOID_STAR bp, unsigned int nb,
-			 VOID_STAR cp)
-{
-   Convert_Fun_Type af, bf;
-   Bin_Fun_Type binfun;
-   int a_indx, b_indx, c_indx;
-   unsigned char c_type;
-   int ret;
-
-   c_type = promote_to_common_type (a_type, b_type);
-
-   a_indx = Type_Precedence_Table [a_type];
-   b_indx = Type_Precedence_Table [b_type];
-   c_indx = Type_Precedence_Table [c_type];
-
-   af = Binary_Matrix[a_indx][c_indx].convert_function;
-   bf = Binary_Matrix[b_indx][c_indx].convert_function;
-   binfun = Bin_Fun_Map[c_indx];
-
-   if ((af != NULL)
-       && (NULL == (ap = (VOID_STAR) (*af) (ap, na))))
-     return -1;
-
-   if ((bf != NULL)
-       && (NULL == (bp = (VOID_STAR) (*bf) (bp, nb))))
-     {
-	if (af != NULL) SLfree ((char *) ap);
-	return -1;
-     }
-
-   ret = (*binfun) (op, a_type, ap, na, b_type, bp, nb, cp);
-   if (af != NULL) SLfree ((char *) ap);
-   if (bf != NULL) SLfree ((char *) bp);
-
-   return ret;
-}
-
-static int arith_unary_op_result (int op, unsigned char a, unsigned char *b)
-{
-   (void) a;
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_SQR:
-      case SLANG_MUL2:
-      case SLANG_PLUSPLUS:
-      case SLANG_MINUSMINUS:
-      case SLANG_CHS:
-      case SLANG_ABS:
-	*b = a;
-	break;
-
-      case SLANG_NOT:
-      case SLANG_BNOT:
-	if (0 == IS_INTEGER_TYPE(a))
-	  return 0;
-	*b = a;
-	break;
-
-      case SLANG_SIGN:
-	*b = SLANG_INT_TYPE;
-	break;
-     }
-   return 1;
-}
-
-static int integer_pop (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Object_Type obj;
-   int i, j;
-   void (*f)(VOID_STAR, VOID_STAR, unsigned int);
-
-   if (-1 == SLang_pop (&obj))
-     return -1;
-
-   if ((obj.data_type > MAXIMUM_ARITH_TYPE_VALUE)
-       || ((j = Type_Precedence_Table[obj.data_type]) == -1)
-       || (j >= FLOAT_PRECEDENCE_VALUE))
-     {
-	_SLclass_type_mismatch_error (type, obj.data_type);
-       	SLang_free_object (&obj);
-	return -1;
-     }
-
-   i = Type_Precedence_Table[type];
-   f = (void (*)(VOID_STAR, VOID_STAR, unsigned int))
-     Binary_Matrix[j][i].copy_function;
-
-   (*f) (ptr, (VOID_STAR)&obj.v, 1);
-
-   return 0;
-}
-
-static int integer_push (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Object_Type obj;
-   int i;
-   void (*f)(VOID_STAR, VOID_STAR, unsigned int);
-
-   i = Type_Precedence_Table[type];
-   f = (void (*)(VOID_STAR, VOID_STAR, unsigned int))
-     Binary_Matrix[i][i].copy_function;
-
-   obj.data_type = type;
-
-   (*f) ((VOID_STAR)&obj.v, ptr, 1);
-
-   return SLang_push (&obj);
-}
-
-int SLang_pop_char (char *i)
-{
-   return integer_pop (SLANG_CHAR_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_uchar (unsigned char *i)
-{
-   return integer_pop (SLANG_UCHAR_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_short (short *i)
-{
-   return integer_pop (SLANG_SHORT_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_ushort (unsigned short *i)
-{
-   return integer_pop (SLANG_USHORT_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_long (long *i)
-{
-   return integer_pop (SLANG_LONG_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_ulong (unsigned long *i)
-{
-   return integer_pop (SLANG_ULONG_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_integer (int *i)
-{
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (SLANG_INT_TYPE, &obj, 0))
-     return -1;
-   *i = obj.v.int_val;
-   return 0;
-#else
-  return integer_pop (SLANG_INT_TYPE, (VOID_STAR) i);
-#endif
-}
-
-int SLang_pop_uinteger (unsigned int *i)
-{
-   return integer_pop (SLANG_UINT_TYPE, (VOID_STAR) i);
-}
-
-int SLang_push_integer (int i)
-{
-   return SLclass_push_int_obj (SLANG_INT_TYPE, i);
-}
-int SLang_push_uinteger (unsigned int i)
-{
-   return SLclass_push_int_obj (SLANG_UINT_TYPE, (int) i);
-}
-int SLang_push_char (char i)
-{
-   return SLclass_push_char_obj (SLANG_CHAR_TYPE, i);
-}
-int SLang_push_uchar (unsigned char i)
-{
-   return SLclass_push_char_obj (SLANG_UCHAR_TYPE, (char) i);
-}
-int SLang_push_short (short i)
-{
-   return SLclass_push_short_obj (SLANG_SHORT_TYPE, i);
-}
-int SLang_push_ushort (unsigned short i)
-{
-   return SLclass_push_short_obj (SLANG_USHORT_TYPE, (unsigned short) i);
-}
-int SLang_push_long (long i)
-{
-   return SLclass_push_long_obj (SLANG_LONG_TYPE, i);
-}
-int SLang_push_ulong (unsigned long i)
-{
-   return SLclass_push_long_obj (SLANG_ULONG_TYPE, (long) i);
-}
-
-_INLINE_
-int _SLarith_typecast (unsigned char a_type, VOID_STAR ap, unsigned int na,
-		       unsigned char b_type, VOID_STAR bp)
-{
-   int i, j;
-
-   void (*copy)(VOID_STAR, VOID_STAR, unsigned int);
-
-   i = Type_Precedence_Table[a_type];
-   j = Type_Precedence_Table[b_type];
-
-   copy = (void (*)(VOID_STAR, VOID_STAR, unsigned int))
-     Binary_Matrix[i][j].copy_function;
-
-   (*copy) (bp, ap, na);
-   return 1;
-}
-
-#if SLANG_HAS_FLOAT
-
-int SLang_pop_double(double *x, int *convertp, int *ip)
-{
-   SLang_Object_Type obj;
-   int i, convert;
-
-   if (0 != SLang_pop (&obj))
-     return -1;
-
-   i = 0;
-   convert = 0;
-
-   switch (obj.data_type)
-     {
-      case SLANG_FLOAT_TYPE:
-	*x = (double) obj.v.float_val;
-	break;
-
-      case SLANG_DOUBLE_TYPE:
-	*x = obj.v.double_val;
-	break;
-
-      case SLANG_INT_TYPE:
-	i = (int) obj.v.long_val;
-	*x = (double) i;
-	convert = 1;
-	break;
-
-      case SLANG_CHAR_TYPE: *x = (double) obj.v.char_val; break;
-      case SLANG_UCHAR_TYPE: *x = (double) obj.v.uchar_val; break;
-      case SLANG_SHORT_TYPE: *x = (double) obj.v.short_val; break;
-      case SLANG_USHORT_TYPE: *x = (double) obj.v.ushort_val; break;
-      case SLANG_UINT_TYPE: *x = (double) obj.v.uint_val; break;
-      case SLANG_LONG_TYPE: *x = (double) obj.v.long_val; break;
-      case SLANG_ULONG_TYPE: *x = (double) obj.v.ulong_val; break;
-	
-      default:
-	_SLclass_type_mismatch_error (SLANG_DOUBLE_TYPE, obj.data_type);
-	SLang_free_object (&obj);
-	return -1;
-     }
-
-   if (convertp != NULL) *convertp = convert;
-   if (ip != NULL) *ip = i;
-
-   return 0;
-}
-
-int SLang_push_double (double x)
-{
-   return SLclass_push_double_obj (SLANG_DOUBLE_TYPE, x);
-}
-
-int SLang_pop_float (float *x)
-{
-   double d;
-
-   /* Pop it as a double and let the double function do all the typcasting */
-   if (-1 == SLang_pop_double (&d, NULL, NULL))
-     return -1;
-
-   *x = (float) d;
-   return 0;
-}
-
-int SLang_push_float (float f)
-{
-   return SLclass_push_float_obj (SLANG_FLOAT_TYPE, (double) f);
-}
-
-/* Double */
-static int double_push (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   SLang_push_double (*(double *) ptr);
-   return 0;
-}
-
-static int double_push_literal (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   return SLang_push_double (**(double **)ptr);
-}
-
-static int double_pop (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   return SLang_pop_double ((double *) ptr, NULL, NULL);
-}
-
-static void double_byte_code_destroy (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   SLfree (*(char **) ptr);
-}
-
-static int float_push (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   SLang_push_float (*(float *) ptr);
-   return 0;
-}
-
-static int float_pop (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   return SLang_pop_float ((float *) ptr);
-}
-
-#endif				       /* SLANG_HAS_FLOAT */
-
-#if SLANG_HAS_FLOAT
-static char Double_Format[16] = "%g";
-
-void _SLset_double_format (char *s)
-{
-   strncpy (Double_Format, s, 15);
-   Double_Format[15] = 0;
-}
-#endif
-
-static char *arith_string (unsigned char type, VOID_STAR v)
-{
-   char buf [256];
-   char *s;
-
-   s = buf;
-
-   switch (type)
-     {
-      default:
-	s = SLclass_get_datatype_name (type);
-	break;
-
-      case SLANG_CHAR_TYPE:
-	sprintf (s, "%d", *(char *) v);
-	break;
-      case SLANG_UCHAR_TYPE:
-	sprintf (s, "%u", *(unsigned char *) v);
-	break;
-      case SLANG_SHORT_TYPE:
-	sprintf (s, "%d", *(short *) v);
-	break;
-      case SLANG_USHORT_TYPE:
-	sprintf (s, "%u", *(unsigned short *) v);
-	break;
-      case SLANG_INT_TYPE:
-	sprintf (s, "%d", *(int *) v);
-	break;
-      case SLANG_UINT_TYPE:
-	sprintf (s, "%u", *(unsigned int *) v);
-	break;
-      case SLANG_LONG_TYPE:
-	sprintf (s, "%ld", *(long *) v);
-	break;
-      case SLANG_ULONG_TYPE:
-	sprintf (s, "%lu", *(unsigned long *) v);
-	break;
-#if SLANG_HAS_FLOAT
-      case SLANG_FLOAT_TYPE:
-	if (EOF == _SLsnprintf (buf, sizeof (buf), Double_Format, *(float *) v))
-	  sprintf (s, "%e", *(float *) v);
-	break;
-      case SLANG_DOUBLE_TYPE:
-	if (EOF == _SLsnprintf (buf, sizeof (buf), Double_Format, *(double *) v))
-	  sprintf (s, "%e", *(double *) v);
-	break;
-#endif
-     }
-
-   return SLmake_string (s);
-}
-
-static int integer_to_bool (unsigned char type, int *t)
-{
-   (void) type;
-   return SLang_pop_integer (t);
-}
-
-static int push_int_literal (unsigned char type, VOID_STAR ptr)
-{
-   return SLclass_push_int_obj (type, (int) *(long *) ptr);
-}
-
-static int push_char_literal (unsigned char type, VOID_STAR ptr)
-{
-   return SLclass_push_char_obj (type, (char) *(long *) ptr);
-}
-
-#if SIZEOF_SHORT != SIZEOF_INT
-static int push_short_literal (unsigned char type, VOID_STAR ptr)
-{
-   return SLclass_push_short_obj (type, (short) *(long *) ptr);
-}
-#endif
-
-#if SIZEOF_INT != SIZEOF_LONG
-static int push_long_literal (unsigned char type, VOID_STAR ptr)
-{
-   return SLclass_push_long_obj (type, *(long *) ptr);
-}
-#endif
-
-typedef struct
-{
-   char *name;
-   unsigned char data_type;
-   unsigned int sizeof_type;
-   int (*unary_fun)(int, unsigned char, VOID_STAR, unsigned int, VOID_STAR);
-   int (*push_literal) (unsigned char, VOID_STAR);
-   int (*cmp_fun) (unsigned char, VOID_STAR, VOID_STAR, int *);
-}
-Integer_Info_Type;
-
-static Integer_Info_Type Integer_Types [8] =
-{
-     {"Char_Type", SLANG_CHAR_TYPE, sizeof (char), char_unary_op, push_char_literal, char_cmp_function},
-     {"UChar_Type", SLANG_UCHAR_TYPE, sizeof (unsigned char), uchar_unary_op, push_char_literal, uchar_cmp_function},
-#if SIZEOF_INT != SIZEOF_SHORT
-     {"Short_Type", SLANG_SHORT_TYPE, sizeof (short), short_unary_op, push_short_literal, short_cmp_function},
-     {"UShort_Type", SLANG_USHORT_TYPE, sizeof (unsigned short), ushort_unary_op, push_short_literal, ushort_cmp_function},
-#else
-     {NULL, SLANG_SHORT_TYPE},
-     {NULL, SLANG_USHORT_TYPE},
-#endif
-
-     {"Integer_Type", SLANG_INT_TYPE, sizeof (int), int_unary_op, push_int_literal, int_cmp_function},
-     {"UInteger_Type", SLANG_UINT_TYPE, sizeof (unsigned int), uint_unary_op, push_int_literal, uint_cmp_function},
-
-#if SIZEOF_INT != SIZEOF_LONG
-     {"Long_Type", SLANG_LONG_TYPE, sizeof (long), long_unary_op, push_long_literal, long_cmp_function},
-     {"ULong_Type", SLANG_ULONG_TYPE, sizeof (unsigned long), ulong_unary_op, push_long_literal, ulong_cmp_function}
-#else
-     {NULL, SLANG_LONG_TYPE, 0, NULL, NULL, NULL},
-     {NULL, SLANG_ULONG_TYPE, 0, NULL, NULL, NULL}
-#endif
-};
-
-static int create_synonyms (void)
-{
-   static char *names[8] =
-     {
-	"Int16_Type", "UInt16_Type", "Int32_Type", "UInt32_Type",
-	"Int64_Type", "UInt64_Type",
-	"Float32_Type", "Float64_Type"
-     };
-   int types[8];
-   unsigned int i;
-
-   memset ((char *) types, 0, sizeof (types));
-
-   /* The assumption is that sizeof(unsigned X) == sizeof (X) */
-#if SIZEOF_INT == 2
-   types[0] = SLANG_INT_TYPE;
-   types[1] = SLANG_UINT_TYPE;
-#else
-# if SIZEOF_SHORT == 2
-   types[0] = SLANG_SHORT_TYPE;
-   types[1] = SLANG_USHORT_TYPE;
-# else
-#  if SIZEOF_LONG == 2
-   types[0] = SLANG_LONG_TYPE;
-   types[1] = SLANG_ULONG_TYPE;
-#  endif
-# endif
-#endif
-
-#if SIZEOF_INT == 4
-   types[2] = SLANG_INT_TYPE;
-   types[3] = SLANG_UINT_TYPE;
-#else
-# if SIZEOF_SHORT == 4
-   types[2] = SLANG_SHORT_TYPE;
-   types[3] = SLANG_USHORT_TYPE;
-# else
-#  if SIZEOF_LONG == 4
-   types[2] = SLANG_LONG_TYPE;
-   types[3] = SLANG_ULONG_TYPE;
-#  endif
-# endif
-#endif
-
-#if SIZEOF_INT == 8
-   types[4] = SLANG_INT_TYPE;
-   types[5] = SLANG_UINT_TYPE;
-#else
-# if SIZEOF_SHORT == 8
-   types[4] = SLANG_SHORT_TYPE;
-   types[5] = SLANG_USHORT_TYPE;
-# else
-#  if SIZEOF_LONG == 8
-   types[4] = SLANG_LONG_TYPE;
-   types[5] = SLANG_ULONG_TYPE;
-#  endif
-# endif
-#endif
-
-#if SLANG_HAS_FLOAT
-
-#if SIZEOF_FLOAT == 4
-   types[6] = SLANG_FLOAT_TYPE;
-#else
-# if SIZEOF_DOUBLE == 4
-   types[6] = SLANG_DOUBLE_TYPE;
-# endif
-#endif
-#if SIZEOF_FLOAT == 8
-   types[7] = SLANG_FLOAT_TYPE;
-#else
-# if SIZEOF_DOUBLE == 8
-   types[7] = SLANG_DOUBLE_TYPE;
-# endif
-#endif
-
-#endif
-
-   if ((-1 == SLclass_create_synonym ("Int_Type", SLANG_INT_TYPE))
-       || (-1 == SLclass_create_synonym ("UInt_Type", SLANG_UINT_TYPE)))
-     return -1;
-
-   for (i = 0; i < 8; i++)
-     {
-	if (types[i] == 0) continue;
-
-	if (-1 == SLclass_create_synonym (names[i], types[i]))
-	  return -1;
-     }
-
-#if SIZEOF_INT == SIZEOF_SHORT
-   if ((-1 == SLclass_create_synonym ("Short_Type", SLANG_INT_TYPE))
-       || (-1 == SLclass_create_synonym ("UShort_Type", SLANG_UINT_TYPE))
-       || (-1 == _SLclass_copy_class (SLANG_SHORT_TYPE, SLANG_INT_TYPE))
-       || (-1 == _SLclass_copy_class (SLANG_USHORT_TYPE, SLANG_UINT_TYPE)))
-     return -1;
-#endif
-#if SIZEOF_INT == SIZEOF_LONG
-   if ((-1 == SLclass_create_synonym ("Long_Type", SLANG_INT_TYPE))
-       || (-1 == SLclass_create_synonym ("ULong_Type", SLANG_UINT_TYPE))
-       || (-1 == _SLclass_copy_class (SLANG_LONG_TYPE, SLANG_INT_TYPE))
-       || (-1 == _SLclass_copy_class (SLANG_ULONG_TYPE, SLANG_UINT_TYPE)))
-     return -1;
-#endif
-   return 0;
-}
-
-int _SLarith_register_types (void)
-{
-   SLang_Class_Type *cl;
-   int a_type, b_type;
-   int i, j;
-
-#if defined(HAVE_SETLOCALE) && defined(LC_NUMERIC)
-   /* make sure decimal point it used --- the parser requires it */
-   (void) setlocale (LC_NUMERIC, "C"); 
-#endif
-
-   for (i = 0; i < 8; i++)
-     {
-	Integer_Info_Type *info;
-
-	info = Integer_Types + i;
-
-	if (info->name == NULL)
-	  {
-	     /* This happens when the object is the same size as an integer
-	      * For this case, we really want to copy the integer class.
-	      * We will handle that when the synonym is created.
-	      */
-	     continue;
-	  }
-
-	if (NULL == (cl = SLclass_allocate_class (info->name)))
-	  return -1;
-
-	(void) SLclass_set_string_function (cl, arith_string);
-	(void) SLclass_set_push_function (cl, integer_push);
-	(void) SLclass_set_pop_function (cl, integer_pop);
-	cl->cl_push_literal = info->push_literal;
-	cl->cl_to_bool = integer_to_bool;
-
-	cl->cl_cmp = info->cmp_fun;
-
-	if (-1 == SLclass_register_class (cl, info->data_type, info->sizeof_type,
-					  SLANG_CLASS_TYPE_SCALAR))
-	  return -1;
-	if (-1 == SLclass_add_unary_op (info->data_type, info->unary_fun, arith_unary_op_result))
-	  return -1;
-	
-	_SLarith_Is_Arith_Type [info->data_type] = 1;
-     }
-
-#if SLANG_HAS_FLOAT
-   if (NULL == (cl = SLclass_allocate_class ("Double_Type")))
-     return -1;
-   (void) SLclass_set_push_function (cl, double_push);
-   (void) SLclass_set_pop_function (cl, double_pop);
-   (void) SLclass_set_string_function (cl, arith_string);
-   cl->cl_byte_code_destroy = double_byte_code_destroy;
-   cl->cl_push_literal = double_push_literal;
-   cl->cl_cmp = double_cmp_function;
-
-   if (-1 == SLclass_register_class (cl, SLANG_DOUBLE_TYPE, sizeof (double),
-				     SLANG_CLASS_TYPE_SCALAR))
-     return -1;
-   if (-1 == SLclass_add_unary_op (SLANG_DOUBLE_TYPE, double_unary_op, arith_unary_op_result))
-     return -1;
-   _SLarith_Is_Arith_Type [SLANG_DOUBLE_TYPE] = 2;
-
-   if (NULL == (cl = SLclass_allocate_class ("Float_Type")))
-     return -1;
-   (void) SLclass_set_string_function (cl, arith_string);
-   (void) SLclass_set_push_function (cl, float_push);
-   (void) SLclass_set_pop_function (cl, float_pop);
-   cl->cl_cmp = float_cmp_function;
-
-   if (-1 == SLclass_register_class (cl, SLANG_FLOAT_TYPE, sizeof (float),
-				     SLANG_CLASS_TYPE_SCALAR))
-     return -1;
-   if (-1 == SLclass_add_unary_op (SLANG_FLOAT_TYPE, float_unary_op, arith_unary_op_result))
-     return -1;
-   _SLarith_Is_Arith_Type [SLANG_FLOAT_TYPE] = 2;
-#endif
-
-   if (-1 == create_synonyms ())
-     return -1;
-
-   for (a_type = 0; a_type <= MAXIMUM_ARITH_TYPE_VALUE; a_type++)
-     {
-	if (-1 == (i = Type_Precedence_Table [a_type]))
-	  continue;
-
-	for (b_type = 0; b_type <= MAXIMUM_ARITH_TYPE_VALUE; b_type++)
-	  {
-	     int implicit_ok;
-
-	     if (-1 == (j = Type_Precedence_Table [b_type]))
-	       continue;
-
-	     /* Allow implicit typecast, except from into to float */
-	     implicit_ok = ((j >= FLOAT_PRECEDENCE_VALUE)
-			    || (i < FLOAT_PRECEDENCE_VALUE));
-
-	     if (-1 == SLclass_add_binary_op (a_type, b_type, arith_bin_op, arith_bin_op_result))
-	       return -1;
-
-	     if (i != j)
-	       if (-1 == SLclass_add_typecast (a_type, b_type, _SLarith_typecast, implicit_ok))
-		 return -1;
-	  }
-     }
-
-   return 0;
-}
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-
-static void promote_objs (SLang_Object_Type *a, SLang_Object_Type *b,
-			  SLang_Object_Type *c, SLang_Object_Type *d)
-{
-   unsigned char ia, ib, ic, id;
-   int i, j;
-   void (*copy)(VOID_STAR, VOID_STAR, unsigned int);
-
-   ia = a->data_type;
-   ib = b->data_type;
-   
-   ic = _SLarith_promote_type (ia);
-
-   if (ic == ib) id = ic;	       /* already promoted */
-   else id = _SLarith_promote_type (ib);
-
-   i = Type_Precedence_Table[ic];
-   j = Type_Precedence_Table[id];
-   if (i > j)
-     {
-	id = ic;
-	j = i;
-     }
-
-   c->data_type = d->data_type = id;
-
-   i = Type_Precedence_Table[ia];
-   copy = (void (*)(VOID_STAR, VOID_STAR, unsigned int))
-     Binary_Matrix[i][j].copy_function;
-   (*copy) ((VOID_STAR) &c->v, (VOID_STAR)&a->v, 1);
-
-   i = Type_Precedence_Table[ib];
-   copy = (void (*)(VOID_STAR, VOID_STAR, unsigned int))
-     Binary_Matrix[i][j].copy_function;
-   (*copy) ((VOID_STAR) &d->v, (VOID_STAR)&b->v, 1);
-}
-
-int _SLarith_bin_op (SLang_Object_Type *oa, SLang_Object_Type *ob, int op)
-{
-   unsigned char a_type, b_type;
-
-   a_type = oa->data_type;
-   b_type = ob->data_type;
-
-   if (a_type != b_type)
-     {
-	SLang_Object_Type obj_a, obj_b;
-	
-	/* Handle common cases */
-	if ((a_type == SLANG_INT_TYPE)
-	    && (b_type == SLANG_DOUBLE_TYPE))
-	  return double_double_scalar_bin_op (oa->v.int_val, ob->v.double_val, op);
-
-	if ((a_type == SLANG_DOUBLE_TYPE)
-	    && (b_type == SLANG_INT_TYPE))
-	  return double_double_scalar_bin_op (oa->v.double_val, ob->v.int_val, op);
-
-	/* Otherwise do it the hard way */
-	promote_objs (oa, ob, &obj_a, &obj_b);
-	oa = &obj_a;
-	ob = &obj_b;
-	
-	a_type = oa->data_type;
-	b_type = ob->data_type;
-     }
-   
-	  
-   switch (a_type)
-     {
-      case SLANG_CHAR_TYPE:
-	return int_int_scalar_bin_op (oa->v.char_val, ob->v.char_val, op);
-
-      case SLANG_UCHAR_TYPE:
-	return int_int_scalar_bin_op (oa->v.uchar_val, ob->v.uchar_val, op);
-
-      case SLANG_SHORT_TYPE:
-	return int_int_scalar_bin_op (oa->v.short_val, ob->v.short_val, op);
-
-      case SLANG_USHORT_TYPE:
-# if SIZEOF_INT == SIZEOF_SHORT
-	return uint_uint_scalar_bin_op (oa->v.ushort_val, ob->v.ushort_val, op);
-# else
-	return int_int_scalar_bin_op ((int)oa->v.ushort_val, (int)ob->v.ushort_val, op);
-# endif
-
-#if SIZEOF_LONG == SIZEOF_INT
-      case SLANG_LONG_TYPE:
-#endif
-      case SLANG_INT_TYPE:
-	return int_int_scalar_bin_op (oa->v.int_val, ob->v.int_val, op);
-
-#if SIZEOF_LONG == SIZEOF_INT
-      case SLANG_ULONG_TYPE:
-#endif
-      case SLANG_UINT_TYPE:
-	return uint_uint_scalar_bin_op (oa->v.uint_val, ob->v.uint_val, op);
-	
-#if SIZEOF_LONG != SIZEOF_INT
-      case SLANG_LONG_TYPE:
-	return long_long_scalar_bin_op (oa->v.long_val, ob->v.long_val, op);
-      case SLANG_ULONG_TYPE:
-	return ulong_ulong_scalar_bin_op (oa->v.ulong_val, ob->v.ulong_val, op);
-#endif
-      case SLANG_FLOAT_TYPE:
-	return float_float_scalar_bin_op (oa->v.float_val, ob->v.float_val, op);
-      case SLANG_DOUBLE_TYPE:
-	return double_double_scalar_bin_op (oa->v.double_val, ob->v.double_val, op);
-     }
-   
-   return 1;
-}
-#endif
diff --git a/mdk-stage1/slang/slarith.inc b/mdk-stage1/slang/slarith.inc
deleted file mode 100644
index efa8a5e04..000000000
--- a/mdk-stage1/slang/slarith.inc
+++ /dev/null
@@ -1,783 +0,0 @@
-/* -*- c -*- */
-
-/* This include file is a template for defining arithmetic binary operations 
- * on arithmetic types.  I realize that doing it this way is not very
- * elegant but it minimizes the number of lines of code and I believe it 
- * promotes clarity.
- */
-
-/* The following macros should be properly defined before including this file:
- *
- *   GENERIC_BINARY_FUNCTION:   The name of the binary function
- *   GENERIC_TYPE:              The class data type
- *   MOD_FUNCTION:	        The function to use for mod
- *   ABS_FUNCTION:              Name of the abs function
- *   SIGN_FUNCTION:             Name of the sign function
- *   GENERIC_UNARY_FUNCTION     Name of the unary function
- *
- * If GENERIC_BIT_OPERATIONS is defined, the bit-level binary operators 
- * will get included.  If the data type has a power operation (SLANG_POW), 
- * then POW_FUNCTION should be defined to return POW_RESULT_TYPE.
- */
-#ifdef GENERIC_BINARY_FUNCTION
-
-static int GENERIC_BINARY_FUNCTION 
-(int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
-   GENERIC_TYPE *c, *a, *b;
-#ifdef POW_FUNCTION
-   POW_RESULT_TYPE *d;
-#endif
-   unsigned int n;
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-   unsigned int n_max, da, db;
-#endif
-   char *cc;
-
-   (void) a_type;		       /* Both SLANG_INT_TYPE */
-   (void) b_type;
-
-   a = (GENERIC_TYPE *) ap;
-   b = (GENERIC_TYPE *) bp;
-   c = (GENERIC_TYPE *) cp;
-   cc = (char *) cp;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-   if (na == 1) da = 0; else da = 1;
-   if (nb == 1) db = 0; else db = 1;
-
-   if (na > nb) n_max = na; else n_max = nb;
-#endif
-
-   switch (op)
-     {
-      default:
-	return 0;
-#ifdef POW_FUNCTION
-      case SLANG_POW:
-	d = (POW_RESULT_TYPE *) cp;
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     d[n] = POW_FUNCTION(*a, *b);
-	     a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       d[n] = POW_FUNCTION(a[n],b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     if (xb == 2)
-	       for (n = 0; n < na; n++)
-		 d[n] = a[n] * a[n];
-	     else
-	       for (n = 0; n < na; n++)
-		 d[n] = POW_FUNCTION(a[n], xb);
-	  }
-	else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       d[n] = POW_FUNCTION(xa, b[n]);
-	  }
-#endif
-	break;
-#endif
-      case SLANG_PLUS:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a + *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] + b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] + xb;
-	  }
-	else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa + b[n];
-	  }
-#endif
-	break;
-
-      case SLANG_MINUS:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a - *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] - b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] - xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa - b[n];
-	  }
-#endif
-	break;
-
-      case SLANG_TIMES:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a * *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] * b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] * xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa * b[n];
-	  }
-#endif
-	break;
-
-      case SLANG_DIVIDE:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (*b == 0)
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     c[n] = (*a / *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       {
-		  if (b[n] == 0)
-		    {
-		       SLang_Error = SL_DIVIDE_ERROR;
-		       return -1;
-		    }
-		  c[n] = a[n] / b[n];
-	       }
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     
-	     if (xb == 0)
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] / xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       {
-		  if (b[n] == 0)
-		    {
-		       SLang_Error = SL_DIVIDE_ERROR;
-		       return -1;
-		    }
-		  c[n] = xa / b[n];
-	       }
-	  }
-#endif
-	break;
-	     
-      case SLANG_MOD:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (*b == 0)
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     c[n] = MOD_FUNCTION(*a, *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       {
-		  if (b[n] == 0)
-		    {
-		       SLang_Error = SL_DIVIDE_ERROR;
-		       return -1;
-		    }
-		  c[n] = MOD_FUNCTION(a[n],b[n]);
-	       }
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     if (xb == 0)
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     for (n = 0; n < na; n++)
-	       c[n] = MOD_FUNCTION(a[n],xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       {
-		  if (b[n] == 0)
-		    {
-		       SLang_Error = SL_DIVIDE_ERROR;
-		       return -1;
-		    }
-		  c[n] = MOD_FUNCTION(xa,b[n]);
-	       }
-	  }
-#endif
-	break;
-
-#ifdef GENERIC_BIT_OPERATIONS
-      case SLANG_BAND:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a & *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] & b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] & xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa & b[n];
-	  }
-#endif
-	break;
-
-      case SLANG_BXOR:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a ^ *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] ^ b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] ^ xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa ^ b[n];
-	  }
-#endif
-	break;
-
-      case SLANG_BOR:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a | *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] | b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] | xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa | b[n];
-	  }
-#endif
-	break;
-
-      case SLANG_SHL:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a << *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] << b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] << xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa << b[n];
-	  }
-#endif
-	break;
-
-      case SLANG_SHR:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a >> *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] >> b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] >> xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa >> b[n];
-	  }
-#endif
-	break;
-#endif				       /* GENERIC_BIT_OPERATIONS */
-      case SLANG_EQ:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a == *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] == b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] == xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa == b[n]);
-	  }
-#endif
-	break;
-
-      case SLANG_NE:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a != *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] != b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] != xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa != b[n]);
-	  }
-#endif
-	break;
-
-      case SLANG_GT:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a > *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] > b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] > xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa > b[n]);
-	  }
-#endif
-	break;
-
-      case SLANG_GE:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a >= *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] >= b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] >= xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa >= b[n]);
-	  }
-#endif
-	break;
-
-      case SLANG_LT:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a < *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] < b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] < xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa < b[n]);
-	  }
-#endif
-	break;
-
-      case SLANG_LE:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a <= *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] <= b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] <= xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa <= b[n]);
-	  }
-#endif
-	break;
-
-      case SLANG_OR:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a || *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] || b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] || xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa || b[n]);
-	  }
-#endif
-	break;
-
-      case SLANG_AND:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a && *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] && b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] && xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa && b[n]);
-	  }
-#endif
-	break;
-     }
-   return 1;
-}
-
-#endif				       /* GENERIC_BINARY_FUNCTION */
-
-
-#ifdef GENERIC_UNARY_FUNCTION
-
-static int GENERIC_UNARY_FUNCTION
-(int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- VOID_STAR bp
- )
-{
-   GENERIC_TYPE *a, *b;
-   unsigned int n;
-   int *ib;
-
-   (void) a_type;
-
-   a = (GENERIC_TYPE *) ap;
-   b = (GENERIC_TYPE *) bp;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUSPLUS:
-	for (n = 0; n < na; n++) b[n] = (a[n] + 1);
-	break;
-      case SLANG_MINUSMINUS:
-	for (n = 0; n < na; n++) b[n] = (a[n] - 1);
-	break;
-      case SLANG_CHS:
-	for (n = 0; n < na; n++) b[n] = (GENERIC_TYPE) -(a[n]);
-	break;
-      case SLANG_SQR:
-	for (n = 0; n < na; n++) b[n] = (a[n] * a[n]);
-	break;
-      case SLANG_MUL2:
-	for (n = 0; n < na; n++) b[n] = (2 * a[n]);
-	break;
-      case SLANG_ABS:
-	for (n = 0; n < na; n++) b[n] = ABS_FUNCTION (a[n]);
-	break;
-      case SLANG_SIGN:
-	ib = (int *) bp;
-	for (n = 0; n < na; n++)
-	  ib[n] = SIGN_FUNCTION(a[n]);
-	break;
-
-#ifdef GENERIC_BIT_OPERATIONS
-      case SLANG_NOT:
-	for (n = 0; n < na; n++) b[n] = !(a[n]);
-	break;
-      case SLANG_BNOT:
-	for (n = 0; n < na; n++) b[n] = ~(a[n]);
-	break;
-#endif
-     }
-
-   return 1;
-}
-#endif				       /* GENERIC_UNARY_FUNCTION */
-
-
-#ifdef SCALAR_BINARY_FUNCTION
-
-static int SCALAR_BINARY_FUNCTION (GENERIC_TYPE a, GENERIC_TYPE b, int op)
-{
-   switch (op)
-     {
-      default:
-	return 1;
-	
-#ifdef POW_FUNCTION
-      case SLANG_POW:
-	return PUSH_POW_OBJ_FUN(POW_FUNCTION(a, b));
-#endif
-      case SLANG_PLUS:
-	return PUSH_SCALAR_OBJ_FUN (a + b);
-      case SLANG_MINUS:
-	return PUSH_SCALAR_OBJ_FUN (a - b);
-      case SLANG_TIMES:
-	return PUSH_SCALAR_OBJ_FUN (a * b);
-      case SLANG_DIVIDE:
-	if (b == 0)
-	  {
-	     SLang_Error = SL_DIVIDE_ERROR;
-	     return -1;
-	  }
-	return PUSH_SCALAR_OBJ_FUN (a / b);
-      case SLANG_MOD:
-	if (b == 0)
-	  {
-	     SLang_Error = SL_DIVIDE_ERROR;
-	     return -1;
-	  }
-	return PUSH_SCALAR_OBJ_FUN (MOD_FUNCTION(a,b));
-#ifdef GENERIC_BIT_OPERATIONS
-      case SLANG_BAND:
-	return PUSH_SCALAR_OBJ_FUN (a & b);
-      case SLANG_BXOR:
-	return PUSH_SCALAR_OBJ_FUN (a ^ b);
-      case SLANG_BOR:
-	return PUSH_SCALAR_OBJ_FUN (a | b);
-      case SLANG_SHL:
-	return PUSH_SCALAR_OBJ_FUN (a << b);
-      case SLANG_SHR:
-	return PUSH_SCALAR_OBJ_FUN (a >> b);
-#endif
-      case SLANG_GT: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a > b));
-      case SLANG_LT: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a < b));
-      case SLANG_GE: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a >= b));
-      case SLANG_LE: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a <= b));
-      case SLANG_EQ: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a == b));
-      case SLANG_NE: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a != b));
-      case SLANG_OR: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a || b));
-      case SLANG_AND: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a && b));
-     }
-}
-
-#endif				       /* SCALAR_BINARY_FUNCTION */
-
-#ifdef CMP_FUNCTION
-static int CMP_FUNCTION (unsigned char unused, VOID_STAR a, VOID_STAR b, int *c)
-{
-   GENERIC_TYPE x, y;
-
-   (void) unused;
-   x = *(GENERIC_TYPE *) a;
-   y = *(GENERIC_TYPE *) b;
-   
-   if (x > y) *c = 1;
-   else if (x == y) *c = 0;
-   else *c = -1;
-   
-   return 0;
-}
-#endif
-
-#undef CMP_FUNCTION
-#undef SCALAR_BINARY_FUNCTION
-#undef PUSH_POW_OBJ_FUN
-#undef PUSH_SCALAR_OBJ_FUN
-#undef GENERIC_BINARY_FUNCTION
-#undef GENERIC_UNARY_FUNCTION
-#undef GENERIC_BIT_OPERATIONS
-#undef GENERIC_TYPE
-#undef POW_FUNCTION
-#undef POW_RESULT_TYPE
-#undef MOD_FUNCTION
-#undef ABS_FUNCTION
-#undef SIGN_FUNCTION
diff --git a/mdk-stage1/slang/slarray.c b/mdk-stage1/slang/slarray.c
deleted file mode 100644
index 0b9a1406c..000000000
--- a/mdk-stage1/slang/slarray.c
+++ /dev/null
@@ -1,3139 +0,0 @@
-/* Array manipulation routines for S-Lang */
-/* Copyright (c) 1997, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#define SL_APP_WANTS_FOREACH
-#include "slang.h"
-#include "_slang.h"
-
-typedef struct
-{
-   int first_index;
-   int last_index;
-   int delta;
-}
-SLarray_Range_Array_Type;
-
-/* Use SLang_pop_array when a linear array is required. */
-static int pop_array (SLang_Array_Type **at_ptr, int convert_scalar)
-{
-   SLang_Array_Type *at;
-   int one = 1;
-   int type;
-
-   *at_ptr = NULL;
-   type = SLang_peek_at_stack ();
-
-   switch (type)
-     {
-      case -1:
-	return -1;
-
-      case SLANG_ARRAY_TYPE:
-	return SLclass_pop_ptr_obj (SLANG_ARRAY_TYPE, (VOID_STAR *) at_ptr);
-
-      case SLANG_NULL_TYPE:
-	convert_scalar = 0;
-	/* drop */
-      default:
-	if (convert_scalar == 0)
-	  {
-	     SLdo_pop ();
-	     SLang_verror (SL_TYPE_MISMATCH, "Context requires an array.  Scalar not converted");
-	     return -1;
-	  }
-	break;
-     }
-
-   if (NULL == (at = SLang_create_array ((unsigned char) type, 0, NULL, &one, 1)))
-     return -1;
-
-   if (-1 == at->cl->cl_apop ((unsigned char) type, at->data))
-     {
-	SLang_free_array (at);
-	return -1;
-     }
-
-   *at_ptr = at;
-
-   return 0;
-}
-
-static VOID_STAR linear_get_data_addr (SLang_Array_Type *at, int *dims)
-{
-   unsigned int num_dims;
-   unsigned int ofs;
-   unsigned int i;
-   int *max_dims;
-
-   ofs = 0;
-   max_dims = at->dims;
-   num_dims = at->num_dims;
-
-   for (i = 0; i < num_dims; i++)
-     {
-	int d = dims[i];
-
-	if (d < 0)
-	  d = d + max_dims[i];
-
-	ofs = ofs * (unsigned int)max_dims [i] + (unsigned int) d;
-     }
-
-   return (VOID_STAR) ((char *)at->data + (ofs * at->sizeof_type));
-}
-
-static VOID_STAR get_data_addr (SLang_Array_Type *at, int *dims)
-{
-   VOID_STAR data;
-
-   data = at->data;
-   if (data == NULL)
-     {
-	SLang_verror (SL_UNKNOWN_ERROR, "Array has no data");
-	return NULL;
-     }
-
-   data = (*at->index_fun) (at, dims);
-
-   if (data == NULL)
-     {
-	SLang_verror (SL_UNKNOWN_ERROR, "Unable to access array element");
-	return NULL;
-     }
-
-   return data;
-}
-
-void _SLarray_free_array_elements (SLang_Class_Type *cl, VOID_STAR s, unsigned int num)
-{
-   unsigned int sizeof_type;
-   void (*f) (unsigned char, VOID_STAR);
-   char *p;
-   unsigned char type;
-
-   if ((cl->cl_class_type == SLANG_CLASS_TYPE_SCALAR)
-       || (cl->cl_class_type == SLANG_CLASS_TYPE_VECTOR))
-     return;
-
-   f = cl->cl_destroy;
-   sizeof_type = cl->cl_sizeof_type;
-   type = cl->cl_data_type;
-
-   p = (char *) s;
-   while (num != 0)
-     {
-	if (NULL != *(VOID_STAR *)p)
-	  {
-	     (*f) (type, (VOID_STAR)p);
-	     *(VOID_STAR *) p = NULL;
-	  }
-	p += sizeof_type;
-	num--;
-     }
-}
-
-static int destroy_element (SLang_Array_Type *at,
-			    int *dims,
-			    VOID_STAR data)
-{
-   data = get_data_addr (at, dims);
-   if (data == NULL)
-     return -1;
-
-   /* This function should only get called for arrays that have
-    * pointer elements.  Do not call the destroy method if the element
-    * is NULL.
-    */
-   if (NULL != *(VOID_STAR *)data)
-     {
-	(*at->cl->cl_destroy) (at->data_type, data);
-	*(VOID_STAR *) data = NULL;
-     }
-   return 0;
-}
-
-/* This function only gets called when a new array is created.  Thus there
- * is no need to destroy the object first.
- */
-static int new_object_element (SLang_Array_Type *at,
-			       int *dims,
-			       VOID_STAR data)
-{
-   data = get_data_addr (at, dims);
-   if (data == NULL)
-     return -1;
-
-   return (*at->cl->cl_init_array_object) (at->data_type, data);
-}
-
-static int next_index (int *dims, int *max_dims, unsigned int num_dims)
-{
-   while (num_dims)
-     {
-	int dims_i;
-
-	num_dims--;
-
-	dims_i = dims [num_dims] + 1;
-	if (dims_i != (int) max_dims [num_dims])
-	  {
-	     dims [num_dims] = dims_i;
-	     return 0;
-	  }
-	dims [num_dims] = 0;
-     }
-
-   return -1;
-}
-
-static int do_method_for_all_elements (SLang_Array_Type *at,
-				       int (*method)(SLang_Array_Type *,
-						     int *,
-						     VOID_STAR),
-				       VOID_STAR client_data)
-{
-   int dims [SLARRAY_MAX_DIMS];
-   int *max_dims;
-   unsigned int num_dims;
-
-   if (at->num_elements == 0)
-     return 0;
-
-   max_dims = at->dims;
-   num_dims = at->num_dims;
-
-   SLMEMSET((char *)dims, 0, sizeof(dims));
-
-   do
-     {
-	if (-1 == (*method) (at, dims, client_data))
-	  return -1;
-     }
-   while (0 == next_index (dims, max_dims, num_dims));
-
-   return 0;
-}
-
-void SLang_free_array (SLang_Array_Type *at)
-{
-   VOID_STAR data;
-   unsigned int flags;
-
-   if (at == NULL) return;
-
-   if (at->num_refs > 1)
-     {
-	at->num_refs -= 1;
-	return;
-     }
-
-   data = at->data;
-   flags = at->flags;
-
-   if (flags & SLARR_DATA_VALUE_IS_INTRINSIC)
-     return;			       /* not to be freed */
-
-   if (flags & SLARR_DATA_VALUE_IS_POINTER)
-     (void) do_method_for_all_elements (at, destroy_element, NULL);
-
-   SLfree ((char *) data);
-   SLfree ((char *) at);
-}
-
-SLang_Array_Type *
-SLang_create_array1 (unsigned char type, int read_only, VOID_STAR data,
-		     int *dims, unsigned int num_dims, int no_init)
-{
-   SLang_Class_Type *cl;
-   unsigned int i;
-   SLang_Array_Type *at;
-   unsigned int num_elements;
-   unsigned int sizeof_type;
-   unsigned int size;
-
-   if (num_dims > SLARRAY_MAX_DIMS)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED, "%u dimensional arrays are not supported", num_dims);
-	return NULL;
-     }
-
-   for (i = 0; i < num_dims; i++)
-     {
-	if (dims[i] < 0)
-	  {
-	     SLang_verror (SL_INVALID_PARM, "Size of array dim %u is less than 0", i);
-	     return NULL;
-	  }
-     }
-
-   cl = _SLclass_get_class (type);
-
-   at = (SLang_Array_Type *) SLmalloc (sizeof(SLang_Array_Type));
-   if (at == NULL)
-     return NULL;
-
-   SLMEMSET ((char*) at, 0, sizeof(SLang_Array_Type));
-
-   at->data_type = type;
-   at->cl = cl;
-   at->num_dims = num_dims;
-   at->num_refs = 1;
-
-   if (read_only) at->flags = SLARR_DATA_VALUE_IS_READ_ONLY;
-   switch (cl->cl_class_type)
-     {
-      case SLANG_CLASS_TYPE_VECTOR:
-      case SLANG_CLASS_TYPE_SCALAR:
-	break;
-
-      default:
-	at->flags |= SLARR_DATA_VALUE_IS_POINTER;
-     }
-
-   num_elements = 1;
-   for (i = 0; i < num_dims; i++)
-     {
-	at->dims [i] = dims[i];
-	num_elements = dims [i] * num_elements;
-     }
-
-   /* Now set the rest of the unused dimensions to 1.  This makes it easier
-    * when transposing arrays.
-    */
-   while (i < SLARRAY_MAX_DIMS)
-     at->dims[i++] = 1;
-
-   at->num_elements = num_elements;
-   at->index_fun = linear_get_data_addr;
-   at->sizeof_type = sizeof_type = cl->cl_sizeof_type;
-
-   if (data != NULL)
-     {
-	at->data = data;
-	return at;
-     }
-
-   size = num_elements * sizeof_type;
-
-   if (size == 0) size = 1;
-
-   if (NULL == (data = (VOID_STAR) SLmalloc (size)))
-     {
-	SLang_free_array (at);
-	return NULL;
-     }
-
-   if (no_init == 0)
-     SLMEMSET ((char *) data, 0, size);
-
-   at->data = data;
-
-   if ((cl->cl_init_array_object != NULL)
-       && (-1 == do_method_for_all_elements (at, new_object_element, NULL)))
-     {
-	SLang_free_array (at);
-	return NULL;
-     }
-   return at;
-}
-
-SLang_Array_Type *
-SLang_create_array (unsigned char type, int read_only, VOID_STAR data,
-		    int *dims, unsigned int num_dims)
-{
-   return SLang_create_array1 (type, read_only, data, dims, num_dims, 0);
-}
-
-int SLang_add_intrinsic_array (char *name,
-			       unsigned char type,
-			       int read_only,
-			       VOID_STAR data,
-			       unsigned int num_dims, ...)
-{
-   va_list ap;
-   unsigned int i;
-   int dims[SLARRAY_MAX_DIMS];
-   SLang_Array_Type *at;
-
-   if ((num_dims > SLARRAY_MAX_DIMS)
-       || (name == NULL)
-       || (data == NULL))
-     {
-	SLang_verror (SL_INVALID_PARM, "Unable to create intrinsic array");
-	return -1;
-     }
-
-   va_start (ap, num_dims);
-   for (i = 0; i < num_dims; i++)
-     dims [i] = va_arg (ap, int);
-   va_end (ap);
-
-   at = SLang_create_array (type, read_only, data, dims, num_dims);
-   if (at == NULL)
-     return -1;
-   at->flags |= SLARR_DATA_VALUE_IS_INTRINSIC;
-
-   /* Note: The variable that refers to the intrinsic array is regarded as
-    * read-only.  That way, Array_Name = another_array; will fail.
-    */
-   if (-1 == SLadd_intrinsic_variable (name, (VOID_STAR) at, SLANG_ARRAY_TYPE, 1))
-     {
-	SLang_free_array (at);
-	return -1;
-     }
-   return 0;
-}
-
-static int pop_array_indices (int *dims, unsigned int num_dims)
-{
-   unsigned int n;
-   int i;
-
-   if (num_dims > SLARRAY_MAX_DIMS)
-     {
-	SLang_verror (SL_INVALID_PARM, "Array size not supported");
-	return -1;
-     }
-
-   n = num_dims;
-   while (n != 0)
-     {
-	n--;
-	if (-1 == SLang_pop_integer (&i))
-	  return -1;
-
-	dims[n] = i;
-     }
-
-   return 0;
-}
-
-int SLang_push_array (SLang_Array_Type *at, int free_flag)
-{
-   if (at == NULL)
-     return SLang_push_null ();
-
-   at->num_refs += 1;
-
-   if (0 == SLclass_push_ptr_obj (SLANG_ARRAY_TYPE, (VOID_STAR) at))
-     {
-	if (free_flag)
-	  SLang_free_array (at);
-	return 0;
-     }
-
-   at->num_refs -= 1;
-
-   if (free_flag) SLang_free_array (at);
-   return -1;
-}
-
-/* This function gets called via expressions such as Double_Type[10, 20];
- */
-static int push_create_new_array (void)
-{
-   unsigned int num_dims;
-   SLang_Array_Type *at;
-   unsigned char type;
-   int dims [SLARRAY_MAX_DIMS];
-   int (*anew) (unsigned char, unsigned int);
-
-   num_dims = (SLang_Num_Function_Args - 1);
-
-   if (-1 == _SLang_pop_datatype (&type))
-     return -1;
-
-   anew = (_SLclass_get_class (type))->cl_anew;
-   if (anew != NULL)
-     return (*anew) (type, num_dims);
-
-   if (-1 == pop_array_indices (dims, num_dims))
-     return -1;
-
-   if (NULL == (at = SLang_create_array (type, 0, NULL, dims, num_dims)))
-     return -1;
-
-   return SLang_push_array (at, 1);
-}
-
-static int push_element_at_addr (SLang_Array_Type *at,
-				 VOID_STAR data, int allow_null)
-{
-   SLang_Class_Type *cl;
-
-   cl = at->cl;
-   if ((at->flags & SLARR_DATA_VALUE_IS_POINTER)
-       && (*(VOID_STAR *) data == NULL))
-     {
-	if (allow_null)
-	  return SLang_push_null ();
-
-	SLang_verror (SL_VARIABLE_UNINITIALIZED,
-		      "%s array has unitialized element", cl->cl_name);
-	return -1;
-     }
-
-   return (*cl->cl_apush)(at->data_type, data);
-}
-
-static int coerse_array_to_linear (SLang_Array_Type *at)
-{
-   SLarray_Range_Array_Type *range;
-   int *data;
-   int xmin, dx;
-   unsigned int i, imax;
-
-   /* FIXME: Priority = low.  This assumes that if an array is not linear, then
-    * it is a range.
-    */
-   if (0 == (at->flags & SLARR_DATA_VALUE_IS_RANGE))
-     return 0;
-
-   range = (SLarray_Range_Array_Type *) at->data;
-   xmin = range->first_index;
-   dx = range->delta;
-
-   imax = at->num_elements;
-   data = (int *) SLmalloc ((imax + 1) * sizeof (int));
-   if (data == NULL)
-     return -1;
-
-   for (i = 0; i < imax; i++)
-     {
-	data [i] = xmin;
-	xmin += dx;
-     }
-
-   SLfree ((char *) range);
-   at->data = (VOID_STAR) data;
-   at->flags &= ~SLARR_DATA_VALUE_IS_RANGE;
-   at->index_fun = linear_get_data_addr;
-   return 0;
-}
-
-static void
-free_index_objects (SLang_Object_Type *index_objs, unsigned int num_indices)
-{
-   unsigned int i;
-   SLang_Object_Type *obj;
-
-   for (i = 0; i < num_indices; i++)
-     {
-	obj = index_objs + i;
-	if (obj->data_type != 0)
-	  SLang_free_object (obj);
-     }
-}
-
-static int
-pop_indices (SLang_Object_Type *index_objs, unsigned int num_indices,
-	     int *is_index_array)
-{
-   unsigned int i;
-
-   SLMEMSET((char *) index_objs, 0, num_indices * sizeof (SLang_Object_Type));
-
-   *is_index_array = 0;
-
-   if (num_indices >= SLARRAY_MAX_DIMS)
-     {
-	SLang_verror (SL_INVALID_PARM, "too many indices for array");
-	return -1;
-     }
-
-   i = num_indices;
-   while (i != 0)
-     {
-	SLang_Object_Type *obj;
-
-	i--;
-	obj = index_objs + i;
-	if (-1 == _SLang_pop_object_of_type (SLANG_INT_TYPE, obj, 1))
-	  goto return_error;
-
-	if (obj->data_type == SLANG_ARRAY_TYPE)
-	  {
-	     SLang_Array_Type *at = obj->v.array_val;
-
-	     if (at->num_dims == 1)
-	       {
-		  if ((num_indices == 1)
-		      && (0 == (at->flags & SLARR_DATA_VALUE_IS_RANGE)))
-		    *is_index_array = 1;
-	       }
-	     else
-	       {
-		  SLang_verror (SL_INVALID_PARM, "expecting a 1-d index array");
-		  goto return_error;
-	       }
-	  }
-     }
-
-   return 0;
-
-   return_error:
-   free_index_objects (index_objs, num_indices);
-   return -1;
-}
-
-/* Here ind_at is a linear 1-d array of indices */
-static int
-check_index_array_ranges (SLang_Array_Type *at, SLang_Array_Type *ind_at)
-{
-   int *indices, *indices_max;
-   unsigned int num_elements;
-
-   num_elements = at->num_elements;
-   indices = (int *) ind_at->data;
-   indices_max = indices + ind_at->num_elements;
-
-   while (indices < indices_max)
-     {
-	unsigned int d;
-
-	d = (unsigned int) *indices++;
-	if (d >= num_elements)
-	  {
-	     SLang_verror (SL_INVALID_PARM,
-			   "index-array is out of range");
-	     return -1;
-	  }
-     }
-   return 0;
-}
-
-static int
-transfer_n_elements (SLang_Array_Type *at, VOID_STAR dest_data, VOID_STAR src_data,
-		     unsigned int sizeof_type, unsigned int n, int is_ptr)
-{
-   unsigned char data_type;
-   SLang_Class_Type *cl;
-
-   if (is_ptr == 0)
-     {
-	SLMEMCPY ((char *) dest_data, (char *)src_data, n * sizeof_type);
-	return 0;
-     }
-
-   data_type = at->data_type;
-   cl = at->cl;
-
-   while (n != 0)
-     {
-	if (*(VOID_STAR *)dest_data != NULL)
-	  {
-	     (*cl->cl_destroy) (data_type, dest_data);
-	     *(VOID_STAR *) dest_data = NULL;
-	  }
-
-	if (*(VOID_STAR *) src_data == NULL)
-	  *(VOID_STAR *) dest_data = NULL;
-	else
-	  {
-	     if (-1 == (*cl->cl_acopy) (data_type, src_data, dest_data))
-	       /* No need to destroy anything */
-	       return -1;
-	  }
-
-	src_data = (VOID_STAR) ((char *)src_data + sizeof_type);
-	dest_data = (VOID_STAR) ((char *)dest_data + sizeof_type);
-
-	n--;
-     }
-
-   return 0;
-}
-
-int
-_SLarray_aget_transfer_elem (SLang_Array_Type *at, int *indices,
-			     VOID_STAR new_data, unsigned int sizeof_type, int is_ptr)
-{
-   VOID_STAR at_data;
-
-   /* Since 1 element is being transferred, there is not need to coerse
-    * the array to linear.
-    */
-   if (NULL == (at_data = get_data_addr (at, indices)))
-     return -1;
-
-   return transfer_n_elements (at, new_data, at_data, sizeof_type, 1, is_ptr);
-}
-
-/* Here the ind_at index-array is a 1-d array of indices.  This function
- * creates a 1-d array of made up of values of 'at' at the locations
- * specified by the indices.  The result is pushed.
- */
-static int
-aget_from_index_array (SLang_Array_Type *at,
-		       SLang_Array_Type *ind_at)
-{
-   SLang_Array_Type *new_at;
-   int *indices, *indices_max;
-   unsigned char *new_data, *src_data;
-   unsigned int sizeof_type;
-   int is_ptr;
-   
-   if (-1 == coerse_array_to_linear (at))
-     return -1;
-
-   if (-1 == coerse_array_to_linear (ind_at))
-     return -1;
-
-   if (-1 == check_index_array_ranges (at, ind_at))
-     return -1;
-
-   if (NULL == (new_at = SLang_create_array (at->data_type, 0, NULL, ind_at->dims, 1)))
-     return -1;
-
-   /* Since the index array is linear, I can address it directly */
-   indices = (int *) ind_at->data;
-   indices_max = indices + ind_at->num_elements;
-
-   src_data = (unsigned char *) at->data;
-   new_data = (unsigned char *) new_at->data;
-   sizeof_type = new_at->sizeof_type;
-   is_ptr = (new_at->flags & SLARR_DATA_VALUE_IS_POINTER);
-
-   while (indices < indices_max)
-     {
-	unsigned int offset;
-
-	offset = sizeof_type * (unsigned int)*indices;
-	if (-1 == transfer_n_elements (at, (VOID_STAR) new_data,
-				       (VOID_STAR) (src_data + offset),
-				       sizeof_type, 1, is_ptr))
-	  {
-	     SLang_free_array (new_at);
-	     return -1;
-	  }
-
-	new_data += sizeof_type;
-	indices++;
-     }
-
-   return SLang_push_array (new_at, 1);
-}
-
-/* This is extremely ugly.  It is due to the fact that the index_objects
- * may contain ranges.  This is a utility function for the aget/aput
- * routines
- */
-static int
-convert_nasty_index_objs (SLang_Array_Type *at,
-			  SLang_Object_Type *index_objs,
-			  unsigned int num_indices,
-			  int **index_data,
-			  int *range_buf, int *range_delta_buf,
-			  int *max_dims,
-			  unsigned int *num_elements,
-			  int *is_array, int is_dim_array[SLARRAY_MAX_DIMS])
-{
-   unsigned int i, total_num_elements;
-   SLang_Array_Type *ind_at;
-
-   if (num_indices != at->num_dims)
-     {
-	SLang_verror (SL_INVALID_PARM, "Array requires %u indices", at->num_dims);
-	return -1;
-     }
-
-   *is_array = 0;
-   total_num_elements = 1;
-   for (i = 0; i < num_indices; i++)
-     {
-	int max_index, min_index;
-	SLang_Object_Type *obj;
-	int at_dims_i;
-
-	at_dims_i = at->dims[i];
-	obj = index_objs + i;
-	range_delta_buf [i] = 0;
-
-	if (obj->data_type == SLANG_INT_TYPE)
-	  {
-	     range_buf [i] = min_index = max_index = obj->v.int_val;
-	     max_dims [i] = 1;
-	     index_data[i] = range_buf + i;
-	     is_dim_array[i] = 0;
-	  }
-	else
-	  {
-	     *is_array = 1;
-	     is_dim_array[i] = 1;
-	     ind_at = obj->v.array_val;
-
-	     if (ind_at->flags & SLARR_DATA_VALUE_IS_RANGE)
-	       {
-		  SLarray_Range_Array_Type *r;
-		  int delta;
-		  int first_index, last_index;
-
-		  r = (SLarray_Range_Array_Type *) ind_at->data;
-
-		  /* In an array indexing context, range arrays have different
-		   * semantics.  Consider a[[0:10]].  Clearly this means elements
-		   * 0-10 of a.  But what does a[[0:-1]] mean?  By itself,
-		   * [0:-1] is a null matrix [].  But, it is useful in an
-		   * indexing context to allow -1 to refer to the last element
-		   * of the array.  Similarly, [-3:-1] refers to the last 3
-		   * elements.
-		   * 
-		   * However, [-1:-3] does not refer to any of the elements.
-		   */
-		  if ((first_index = r->first_index) < 0)
-		    {
-		       if (at_dims_i != 0)
-			 first_index = (at_dims_i + first_index) % at_dims_i;
-		    }
-
-		  if ((last_index = r->last_index) < 0)
-		    {
-		       if (at_dims_i != 0)
-			 last_index = (at_dims_i + last_index) % at_dims_i;
-		    }
-
-		  delta = r->delta;
-
-		  range_delta_buf [i] = delta;
-		  range_buf[i] = first_index;
-
-		  if (delta > 0)
-		    {
-		       if (first_index > last_index)
-			 max_dims[i] = min_index = max_index = 0;
-		       else
-			 {
-			    max_index = min_index = first_index;
-			    while (max_index + delta <= last_index)
-			      max_index += delta;
-			    max_dims [i] = 1 + (max_index - min_index) / delta;
-			 }
-		    }
-		  else
-		    {
-		       if (first_index < last_index)
-			 max_dims[i] = min_index = max_index = 0;
-		       else
-			 {
-			    min_index = max_index = first_index;
-			    while (min_index + delta >= last_index)
-			      min_index += delta;
-			    max_dims [i] = 1 + (max_index - min_index) / (-delta);
-			 }
-		    }
-	       }
-	     else
-	       {
-		  int *tmp, *tmp_max;
-
-		  if (0 == (max_dims[i] = ind_at->num_elements))
-		    {
-		       total_num_elements = 0;
-		       break;
-		    }
-
-		  tmp = (int *) ind_at->data;
-		  tmp_max = tmp + ind_at->num_elements;
-		  index_data [i] = tmp;
-
-		  min_index = max_index = *tmp;
-		  while (tmp < tmp_max)
-		    {
-		       if (max_index > *tmp)
-			 max_index = *tmp;
-		       if (min_index < *tmp)
-			 min_index = *tmp;
-
-		       tmp++;
-		    }
-	       }
-	  }
-
-	if ((at_dims_i == 0) && (max_dims[i] == 0))
-	  {
-	     total_num_elements = 0;
-	     continue;
-	  }
-
-	if (max_index < 0)
-	  max_index += at_dims_i;
-	if (min_index < 0)
-	  min_index += at_dims_i;
-
-	if ((min_index < 0) || (min_index >= at_dims_i)
-	    || (max_index < 0) || (max_index >= at_dims_i))
-	  {
-	     SLang_verror (SL_INVALID_PARM, "Array index %u ([%d:%d]) out of allowed range [0->%d]",
-			   i, min_index, max_index, at_dims_i);
-	     return -1;
-	  }
-
-	total_num_elements = total_num_elements * max_dims[i];
-     }
-
-   *num_elements = total_num_elements;
-   return 0;
-}
-
-/* This routine pushes a 1-d vector of values from 'at' indexed by
- * the objects 'index_objs'.  These objects can either be integers or
- * 1-d integer arrays.  The fact that the 1-d arrays can be ranges
- * makes this look ugly.
- */
-static int
-aget_from_indices (SLang_Array_Type *at,
-		   SLang_Object_Type *index_objs, unsigned int num_indices)
-{
-   int *index_data [SLARRAY_MAX_DIMS];
-   int range_buf [SLARRAY_MAX_DIMS];
-   int range_delta_buf [SLARRAY_MAX_DIMS];
-   int max_dims [SLARRAY_MAX_DIMS];
-   unsigned int i, num_elements;
-   SLang_Array_Type *new_at;
-   int map_indices[SLARRAY_MAX_DIMS];
-   int indices [SLARRAY_MAX_DIMS];
-   unsigned int sizeof_type;
-   int is_ptr, ret, is_array;
-   char *new_data;
-   SLang_Class_Type *cl;
-   int is_dim_array[SLARRAY_MAX_DIMS];
-
-   if (-1 == convert_nasty_index_objs (at, index_objs, num_indices,
-				       index_data, range_buf, range_delta_buf,
-				       max_dims, &num_elements, &is_array,
-				       is_dim_array))
-     return -1;
-
-   is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
-   sizeof_type = at->sizeof_type;
-
-   cl = _SLclass_get_class (at->data_type);
-
-   if ((is_array == 0) && (num_elements == 1))
-     {
-	new_data = (char *)cl->cl_transfer_buf;
-	memset (new_data, 0, sizeof_type);
-	new_at = NULL;
-     }
-   else
-     {
-	int i_num_elements = (int)num_elements;
-
-	new_at = SLang_create_array (at->data_type, 0, NULL, &i_num_elements, 1);
-	if (NULL == new_at)
-	  return -1;
-	if (num_elements == 0)
-	  return SLang_push_array (new_at, 1);
-
-	new_data = (char *)new_at->data;
-     }
-
-   SLMEMSET((char *) map_indices, 0, sizeof(map_indices));
-   do
-     {
-	for (i = 0; i < num_indices; i++)
-	  {
-	     int j;
-
-	     j = map_indices[i];
-
-	     if (0 != range_delta_buf[i])
-	       indices[i] = range_buf[i] + j * range_delta_buf[i];
-	     else
-	       indices[i] = index_data [i][j];
-	  }
-
-	if (-1 == _SLarray_aget_transfer_elem (at, indices, (VOID_STAR)new_data, sizeof_type, is_ptr))
-	  {
-	     SLang_free_array (new_at);
-	     return -1;
-	  }
-	new_data += sizeof_type;
-     }
-   while (0 == next_index (map_indices, max_dims, num_indices));
-
-   if (new_at != NULL)
-     {
-	int num_dims = 0;
-	/* Fixup dimensions on array */
-	for (i = 0; i < num_indices; i++)
-	  {
-	     if (is_dim_array[i]) /* was: (max_dims[i] > 1) */
-	       {
-		  new_at->dims[num_dims] = max_dims[i];
-		  num_dims++;
-	       }
-	  }
-
-	if (num_dims != 0) new_at->num_dims = num_dims;
-	return SLang_push_array (new_at, 1);
-     }
-
-   /* Here new_data is a whole new copy, so free it after the push */
-   new_data -= sizeof_type;
-   if (is_ptr && (*(VOID_STAR *)new_data == NULL))
-     ret = SLang_push_null ();
-   else
-     {
-	ret = (*cl->cl_apush) (at->data_type, (VOID_STAR)new_data);
-	(*cl->cl_adestroy) (at->data_type, (VOID_STAR)new_data);
-     }
-
-   return ret;
-}
-
-static int push_string_as_array (unsigned char *s, unsigned int len)
-{
-   int ilen;
-   SLang_Array_Type *at;
-
-   ilen = (int) len;
-
-   at = SLang_create_array (SLANG_UCHAR_TYPE, 0, NULL, &ilen, 1);
-   if (at == NULL)
-     return -1;
-
-   memcpy ((char *)at->data, (char *)s, len);
-   return SLang_push_array (at, 1);
-}
-
-static int pop_array_as_string (char **sp)
-{
-   SLang_Array_Type *at;
-   int ret;
-
-   *sp = NULL;
-
-   if (-1 == SLang_pop_array_of_type (&at, SLANG_UCHAR_TYPE))
-     return -1;
-
-   ret = 0;
-
-   if (NULL == (*sp = SLang_create_nslstring ((char *) at->data, at->num_elements)))
-     ret = -1;
-
-   SLang_free_array (at);
-   return ret;
-}
-
-static int pop_array_as_bstring (SLang_BString_Type **bs)
-{
-   SLang_Array_Type *at;
-   int ret;
-
-   *bs = NULL;
-
-   if (-1 == SLang_pop_array_of_type (&at, SLANG_UCHAR_TYPE))
-     return -1;
-
-   ret = 0;
-
-   if (NULL == (*bs = SLbstring_create ((unsigned char *) at->data, at->num_elements)))
-     ret = -1;
-
-   SLang_free_array (at);
-   return ret;
-}
-
-static int aget_from_array (unsigned int num_indices)
-{
-   SLang_Array_Type *at;
-   SLang_Object_Type index_objs [SLARRAY_MAX_DIMS];
-   int ret;
-   int is_index_array;
-   unsigned int i;
-
-   if (num_indices > SLARRAY_MAX_DIMS)
-     {
-	SLang_verror (SL_INVALID_PARM, "Number of dims must be less than %d", SLARRAY_MAX_DIMS);
-	return -1;
-     }
-
-   if (-1 == pop_array (&at, 1))
-     return -1;
-
-   if (-1 == pop_indices (index_objs, num_indices, &is_index_array))
-     {
-	SLang_free_array (at);
-	return -1;
-     }
-
-   if (is_index_array == 0)
-     ret = aget_from_indices (at, index_objs, num_indices);
-   else
-     ret = aget_from_index_array (at, index_objs[0].v.array_val);
-
-   SLang_free_array (at);
-   for (i = 0; i < num_indices; i++)
-     SLang_free_object (index_objs + i);
-
-   return ret;
-}
-
-static int push_string_element (unsigned char type, unsigned char *s, unsigned int len)
-{
-   int i;
-
-   if (SLang_peek_at_stack () == SLANG_ARRAY_TYPE)
-     {
-	char *str;
-
-	/* The indices are array values.  So, do this: */
-	if (-1 == push_string_as_array (s, len))
-	  return -1;
-
-	if (-1 == aget_from_array (1))
-	  return -1;
-
-	if (type == SLANG_BSTRING_TYPE)
-	  {
-	     SLang_BString_Type *bs;
-	     int ret;
-
-	     if (-1 == pop_array_as_bstring (&bs))
-	       return -1;
-
-	     ret = SLang_push_bstring (bs);
-	     SLbstring_free (bs);
-	     return ret;
-	  }
-
-	if (-1 == pop_array_as_string (&str))
-	  return -1;
-	return _SLang_push_slstring (str);   /* frees s upon error */
-     }
-
-   if (-1 == SLang_pop_integer (&i))
-     return -1;
-
-   if (i < 0) i = i + (int)len;
-   if ((unsigned int) i > len)
-     i = len;			       /* get \0 character --- bstrings include it as well */
-
-   i = s[(unsigned int) i];
-
-   return SLang_push_integer (i);
-}
-
-/* ARRAY[i, j, k] generates code: __args i j ...k ARRAY __aput/__aget
- * Here i, j, ... k may be a mixture of integers and 1-d arrays, or
- * a single 2-d array of indices.  The 2-d index array is generated by the
- * 'where' function.
- *
- * If ARRAY is of type DataType, then this function will create an array of
- * the appropriate type.  In that case, the indices i, j, ..., k must be
- * integers.
- */
-int _SLarray_aget (void)
-{
-   unsigned int num_indices;
-   int type;
-   int (*aget_fun) (unsigned char, unsigned int);
-
-   num_indices = (SLang_Num_Function_Args - 1);
-
-   type = SLang_peek_at_stack ();
-   switch (type)
-     {
-      case -1:
-	return -1;		       /* stack underflow */
-
-      case SLANG_DATATYPE_TYPE:
-	return push_create_new_array ();
-
-      case SLANG_BSTRING_TYPE:
-	if (1 == num_indices)
-	  {
-	     SLang_BString_Type *bs;
-	     int ret;
-	     unsigned int len;
-	     unsigned char *s;
-
-	     if (-1 == SLang_pop_bstring (&bs))
-	       return -1;
-
-	     if (NULL == (s = SLbstring_get_pointer (bs, &len)))
-	       ret = -1;
-	     else
-	       ret = push_string_element (type, s, len);
-
-	     SLbstring_free (bs);
-	     return ret;
-	  }
-	break;
-
-      case SLANG_STRING_TYPE:
-	if (1 == num_indices)
-	  {
-	     char *s;
-	     int ret;
-
-	     if (-1 == SLang_pop_slstring (&s))
-	       return -1;
-
-	     ret = push_string_element (type, (unsigned char *)s, strlen (s));
-	     SLang_free_slstring (s);
-	     return ret;
-	  }
-	break;
-
-      case SLANG_ARRAY_TYPE:
-	break;
-
-      default:
-	aget_fun = _SLclass_get_class (type)->cl_aget;
-	if (NULL != aget_fun)
-	  return (*aget_fun) (type, num_indices);
-     }
-
-   return aget_from_array (num_indices);
-}
-
-int
-_SLarray_aput_transfer_elem (SLang_Array_Type *at, int *indices,
-			     VOID_STAR data_to_put, unsigned int sizeof_type, int is_ptr)
-{
-   VOID_STAR at_data;
-
-   /* Since 1 element is being transferred, there is no need to coerse
-    * the array to linear.
-    */
-   if (NULL == (at_data = get_data_addr (at, indices)))
-     return -1;
-
-   return transfer_n_elements (at, at_data, data_to_put, sizeof_type, 1, is_ptr);
-}
-
-static int
-aput_get_array_to_put (SLang_Class_Type *cl, unsigned int num_elements, int allow_array,
-		       SLang_Array_Type **at_ptr, char **data_to_put, unsigned int *data_increment)
-{
-   unsigned char data_type;
-   SLang_Array_Type *at;
-
-   *at_ptr = NULL;
-
-   data_type = cl->cl_data_type;
-   if (-1 == SLclass_typecast (data_type, 1, allow_array))
-     return -1;
-
-   if ((data_type != SLANG_ARRAY_TYPE)
-       && (data_type != SLANG_ANY_TYPE)
-       && (SLANG_ARRAY_TYPE == SLang_peek_at_stack ()))
-     {
-	if (-1 == SLang_pop_array (&at, 0))
-	  return -1;
-
-	if ((at->num_elements != num_elements)
-#if 0
-	    || (at->num_dims != 1)
-#endif
-	    )
-	  {
-	     SLang_verror (SL_TYPE_MISMATCH, "Array size is inappropriate for use with index-array");
-	     SLang_free_array (at);
-	     return -1;
-	  }
-
-	*data_to_put = (char *) at->data;
-	*data_increment = at->sizeof_type;
-	*at_ptr = at;
-	return 0;
-     }
-
-   *data_increment = 0;
-   *data_to_put = (char *) cl->cl_transfer_buf;
-
-   if (-1 == (*cl->cl_apop)(data_type, (VOID_STAR) *data_to_put))
-     return -1;
-
-   return 0;
-}
-
-static int
-aput_from_indices (SLang_Array_Type *at,
-		   SLang_Object_Type *index_objs, unsigned int num_indices)
-{
-   int *index_data [SLARRAY_MAX_DIMS];
-   int range_buf [SLARRAY_MAX_DIMS];
-   int range_delta_buf [SLARRAY_MAX_DIMS];
-   int max_dims [SLARRAY_MAX_DIMS];
-   unsigned int i, num_elements;
-   SLang_Array_Type *bt;
-   int map_indices[SLARRAY_MAX_DIMS];
-   int indices [SLARRAY_MAX_DIMS];
-   unsigned int sizeof_type;
-   int is_ptr, is_array, ret;
-   char *data_to_put;
-   unsigned int data_increment;
-   SLang_Class_Type *cl;
-   int is_dim_array [SLARRAY_MAX_DIMS];
-
-   if (-1 == convert_nasty_index_objs (at, index_objs, num_indices,
-				       index_data, range_buf, range_delta_buf,
-				       max_dims, &num_elements, &is_array,
-				       is_dim_array))
-     return -1;
-
-   cl = at->cl;
-
-   if (-1 == aput_get_array_to_put (cl, num_elements, is_array,
-				    &bt, &data_to_put, &data_increment))
-     return -1;
-
-   sizeof_type = at->sizeof_type;
-   is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
-
-   ret = -1;
-
-   SLMEMSET((char *) map_indices, 0, sizeof(map_indices));
-   if (num_elements) do
-     {
-	for (i = 0; i < num_indices; i++)
-	  {
-	     int j;
-
-	     j = map_indices[i];
-
-	     if (0 != range_delta_buf[i])
-	       indices[i] = range_buf[i] + j * range_delta_buf[i];
-	     else
-	       indices[i] = index_data [i][j];
-	  }
-
-	if (-1 == _SLarray_aput_transfer_elem (at, indices, (VOID_STAR)data_to_put, sizeof_type, is_ptr))
-	  goto return_error;
-
-	data_to_put += data_increment;
-     }
-   while (0 == next_index (map_indices, max_dims, num_indices));
-
-   ret = 0;
-
-   /* drop */
-
-   return_error:
-   if (bt == NULL)
-     {
-	if (is_ptr)
-	  (*cl->cl_destroy) (cl->cl_data_type, (VOID_STAR) data_to_put);
-     }
-   else SLang_free_array (bt);
-
-   return ret;
-}
-
-static int
-aput_from_index_array (SLang_Array_Type *at, SLang_Array_Type *ind_at)
-{
-   int *indices, *indices_max;
-   unsigned int sizeof_type;
-   char *data_to_put, *dest_data;
-   unsigned int data_increment;
-   int is_ptr;
-   SLang_Array_Type *bt;
-   SLang_Class_Type *cl;
-   int ret;
-
-   if (-1 == coerse_array_to_linear (at))
-     return -1;
-
-   if (-1 == coerse_array_to_linear (ind_at))
-     return -1;
-
-   if (-1 == check_index_array_ranges (at, ind_at))
-     return -1;
-
-   sizeof_type = at->sizeof_type;
-
-   cl = at->cl;
-
-   /* Note that if bt is returned as non NULL, then the array is a linear
-    * one.
-    */
-   if (-1 == aput_get_array_to_put (cl, ind_at->num_elements, 1,
-				    &bt, &data_to_put, &data_increment))
-     return -1;
-
-   /* Since the index array is linear, I can address it directly */
-   indices = (int *) ind_at->data;
-   indices_max = indices + ind_at->num_elements;
-
-   is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
-   dest_data = (char *) at->data;
-
-   ret = -1;
-   while (indices < indices_max)
-     {
-	unsigned int offset;
-
-	offset = sizeof_type * (unsigned int)*indices;
-
-	if (-1 == transfer_n_elements (at, (VOID_STAR) (dest_data + offset),
-				       (VOID_STAR) data_to_put, sizeof_type, 1,
-				       is_ptr))
-	  goto return_error;
-
-	indices++;
-	data_to_put += data_increment;
-     }
-
-   ret = 0;
-   /* Drop */
-
-   return_error:
-
-   if (bt == NULL)
-     {
-	if (is_ptr)
-	  (*cl->cl_destroy) (cl->cl_data_type, (VOID_STAR)data_to_put);
-     }
-   else SLang_free_array (bt);
-
-   return ret;
-}
-
-/* ARRAY[i, j, k] = generates code: __args i j k ARRAY __aput
- */
-int _SLarray_aput (void)
-{
-   unsigned int num_indices;
-   SLang_Array_Type *at;
-   SLang_Object_Type index_objs [SLARRAY_MAX_DIMS];
-   int ret;
-   int is_index_array;
-   int (*aput_fun) (unsigned char, unsigned int);
-   int type;
-
-   ret = -1;
-   num_indices = (SLang_Num_Function_Args - 1);
-
-   type = SLang_peek_at_stack ();
-   switch (type)
-     {
-      case -1:
-	return -1;
-
-      case SLANG_ARRAY_TYPE:
-	break;
-
-      default:
-	if (NULL != (aput_fun = _SLclass_get_class (type)->cl_aput))
-	  return (*aput_fun) (type, num_indices);
-	break;
-     }
-
-   if (-1 == SLang_pop_array (&at, 0))
-     return -1;
-
-   if (at->flags & SLARR_DATA_VALUE_IS_READ_ONLY)
-     {
-	SLang_verror (SL_READONLY_ERROR, "%s Array is read-only",
-		      SLclass_get_datatype_name (at->data_type));
-	SLang_free_array (at);
-	return -1;
-     }
-
-   if (-1 == pop_indices (index_objs, num_indices, &is_index_array))
-     {
-	SLang_free_array (at);
-	return -1;
-     }
-
-   if (is_index_array == 0)
-     ret = aput_from_indices (at, index_objs, num_indices);
-   else
-     ret = aput_from_index_array (at, index_objs[0].v.array_val);
-
-   SLang_free_array (at);
-   free_index_objects (index_objs, num_indices);
-   return ret;
-}
-
-/* This is for 1-d matrices only.  It is used by the sort function */
-static int push_element_at_index (SLang_Array_Type *at, int indx)
-{
-   VOID_STAR data;
-
-   if (NULL == (data = get_data_addr (at, &indx)))
-     return -1;
-
-   return push_element_at_addr (at, (VOID_STAR) data, 1);
-}
-
-static SLang_Name_Type *Sort_Function;
-static SLang_Array_Type *Sort_Array;
-
-static int sort_cmp_fun (int *a, int *b)
-{
-   int cmp;
-
-   if (SLang_Error
-       || (-1 == push_element_at_index (Sort_Array, *a))
-       || (-1 == push_element_at_index (Sort_Array, *b))
-       || (-1 == SLexecute_function (Sort_Function))
-       || (-1 == SLang_pop_integer (&cmp)))
-     {
-	/* DO not allow qsort to loop forever.  Return something meaningful */
-	if (*a > *b) return 1;
-	if (*a < *b) return -1;
-	return 0;
-     }
-
-   return cmp;
-}
-
-static int builtin_sort_cmp_fun (int *a, int *b)
-{
-   VOID_STAR a_data;
-   VOID_STAR b_data;
-   SLang_Class_Type *cl;
-   
-   cl = Sort_Array->cl;
-
-   if ((SLang_Error == 0)
-       && (NULL != (a_data = get_data_addr (Sort_Array, a)))
-       && (NULL != (b_data = get_data_addr (Sort_Array, b))))
-     {
-	int cmp;
-
-	if ((Sort_Array->flags & SLARR_DATA_VALUE_IS_POINTER)
-	    && ((*(VOID_STAR *) a_data == NULL) || (*(VOID_STAR *) a_data == NULL)))
-	  {
-	     SLang_verror (SL_VARIABLE_UNINITIALIZED,
-			   "%s array has unitialized element", cl->cl_name);
-	  }
-	else if (0 == (*cl->cl_cmp)(Sort_Array->data_type, a_data, b_data, &cmp))
-	  return cmp;
-     }
-       
-       
-   if (*a > *b) return 1;
-   if (*a == *b) return 0;
-   return -1;
-}
-
-static void sort_array_internal (SLang_Array_Type *at_str, 
-				 SLang_Name_Type *entry,
-				 int (*sort_fun)(int *, int *))
-{
-   SLang_Array_Type *ind_at;
-   /* This is a silly hack to make up for braindead compilers and the lack of
-    * uniformity in prototypes for qsort.
-    */
-   void (*qsort_fun) (char *, unsigned int, int, int (*)(int *, int *));
-   int *indx;
-   int i, n;
-   int dims[1];
-
-   if (Sort_Array != NULL)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED, "array_sort is not recursive");
-	return;
-     }
-
-   n = at_str->num_elements;
-
-   if (at_str->num_dims != 1)
-     {
-	SLang_verror (SL_INVALID_PARM, "sort is restricted to 1 dim arrays");
-	return;
-     }
-
-   dims [0] = n;
-
-   if (NULL == (ind_at = SLang_create_array (SLANG_INT_TYPE, 0, NULL, dims, 1)))
-     return;
-
-   indx = (int *) ind_at->data;
-   for (i = 0; i < n; i++) indx[i] = i;
-
-   if (n > 1)
-     {
-	qsort_fun = (void (*)(char *, unsigned int, int, int (*)(int *,
-								 int *)))
-	  qsort;
-
-	Sort_Array = at_str;
-	Sort_Function = entry;
-	(*qsort_fun) ((char *) indx, n, sizeof (int), sort_fun);
-     }
-
-   Sort_Array = NULL;
-   (void) SLang_push_array (ind_at, 1);
-}
-
-static void sort_array (void)
-{
-   SLang_Name_Type *entry;
-   SLang_Array_Type *at;
-   int (*sort_fun) (int *, int *);
-
-   if (SLang_Num_Function_Args != 1)
-     {
-	sort_fun = sort_cmp_fun;
-
-	if (NULL == (entry = SLang_pop_function ()))
-	  return;
-
-	if (-1 == SLang_pop_array (&at, 1))
-	  return;
-     }
-   else
-     {
-	sort_fun = builtin_sort_cmp_fun;
-	if (-1 == SLang_pop_array (&at, 1))
-	  return;
-	if (at->cl->cl_cmp == NULL)
-	  {
-	     SLang_verror (SL_NOT_IMPLEMENTED, 
-			   "%s does not have a predefined sorting method",
-			   at->cl->cl_name);
-	     SLang_free_array (at);
-	     return;
-	  }
-	entry = NULL;
-     }
-
-   sort_array_internal (at, entry, sort_fun);
-   SLang_free_array (at);
-   SLang_free_function (entry);
-}
-
-static void bstring_to_array (SLang_BString_Type *bs)
-{
-   unsigned char *s;
-   unsigned int len;
-   
-   if (NULL == (s = SLbstring_get_pointer (bs, &len)))
-     (void) SLang_push_null ();
-   else
-     (void) push_string_as_array (s, len);
-}
-
-static void array_to_bstring (SLang_Array_Type *at)
-{
-   unsigned int nbytes;
-   SLang_BString_Type *bs;
-
-   nbytes = at->num_elements * at->sizeof_type;
-   bs = SLbstring_create ((unsigned char *)at->data, nbytes);
-   (void) SLang_push_bstring (bs);
-   SLbstring_free (bs);
-}
-
-static void init_char_array (void)
-{
-   SLang_Array_Type *at;
-   char *s;
-   unsigned int n, ndim;
-
-   if (SLang_pop_slstring (&s)) return;
-
-   if (-1 == SLang_pop_array (&at, 0))
-     goto free_and_return;
-
-   if (at->data_type != SLANG_CHAR_TYPE)
-     {
-	SLang_doerror("Operation requires character array");
-	goto free_and_return;
-     }
-
-   n = strlen (s);
-   ndim = at->num_elements;
-   if (n > ndim)
-     {
-	SLang_doerror("String too big to init array");
-	goto free_and_return;
-     }
-
-   strncpy((char *) at->data, s, ndim);
-   /* drop */
-
-   free_and_return:
-   SLang_free_array (at);
-   SLang_free_slstring (s);
-}
-
-static void array_info (void)
-{
-   SLang_Array_Type *at, *bt;
-   int num_dims;
-
-   if (-1 == pop_array (&at, 1))
-     return;
-
-   num_dims = (int)at->num_dims;
-
-   if (NULL != (bt = SLang_create_array (SLANG_INT_TYPE, 0, NULL, &num_dims, 1)))
-     {
-	int *bdata;
-	int i;
-	int *a_dims;
-
-	a_dims = at->dims;
-	bdata = (int *) bt->data;
-	for (i = 0; i < num_dims; i++) bdata [i] = a_dims [i];
-
-	if (0 == SLang_push_array (bt, 1))
-	  {
-	     (void) SLang_push_integer ((int) at->num_dims);
-	     (void) _SLang_push_datatype (at->data_type);
-	  }
-     }
-
-   SLang_free_array (at);
-}
-
-static VOID_STAR range_get_data_addr (SLang_Array_Type *at, int *dims)
-{
-   static int value;
-   SLarray_Range_Array_Type *r;
-   int d;
-
-   d = *dims;
-   r = (SLarray_Range_Array_Type *)at->data;
-
-   if (d < 0)
-     d += at->dims[0];
-
-   value = r->first_index + d * r->delta;
-   return (VOID_STAR) &value;
-}
-
-static SLang_Array_Type *inline_implicit_int_array (int *xminptr, int *xmaxptr, int *dxptr)
-{
-   int delta;
-   SLang_Array_Type *at;
-   int dims, idims;
-   SLarray_Range_Array_Type *data;
-
-   if (dxptr == NULL) delta = 1;
-   else delta = *dxptr;
-
-   if (delta == 0)
-     {
-	SLang_verror (SL_INVALID_PARM, "range-array increment must be non-zero");
-	return NULL;
-     }
-
-   data = (SLarray_Range_Array_Type *) SLmalloc (sizeof (SLarray_Range_Array_Type));
-   if (data == NULL)
-     return NULL;
-
-   SLMEMSET((char *) data, 0, sizeof (SLarray_Range_Array_Type));
-   data->delta = delta;
-   dims = 0;
-
-   if (xminptr != NULL)
-     data->first_index = *xminptr;
-   else
-     data->first_index = 0;
-
-   if (xmaxptr != NULL)
-     data->last_index = *xmaxptr;
-   else
-     data->last_index = -1;
-
-/*   if ((xminptr != NULL) && (xmaxptr != NULL))
-     { */
-	idims = 1 + (data->last_index - data->first_index) / delta;
-	if (idims > 0)
-	  dims = idims;
-    /* } */
-
-   if (NULL == (at = SLang_create_array (SLANG_INT_TYPE, 0, (VOID_STAR) data, &dims, 1)))
-     return NULL;
-
-   at->index_fun = range_get_data_addr;
-   at->flags |= SLARR_DATA_VALUE_IS_RANGE;
-
-   return at;
-}
-
-#if SLANG_HAS_FLOAT
-static SLang_Array_Type *inline_implicit_floating_array (unsigned char type,
-							 double *xminptr, double *xmaxptr, double *dxptr)
-{
-   int n, i;
-   SLang_Array_Type *at;
-   int dims;
-   double xmin, xmax, dx;
-
-   if ((xminptr == NULL) || (xmaxptr == NULL))
-     {
-	SLang_verror (SL_INVALID_PARM, "range-array has unknown size");
-	return NULL;
-     }
-   xmin = *xminptr;
-   xmax = *xmaxptr;
-   if (dxptr == NULL) dx = 1.0;
-   else dx = *dxptr;
-
-   if (dx == 0.0)
-     {
-	SLang_doerror ("range-array increment must be non-zero");
-	return NULL;
-     }
-
-   /* I have convinced myself that it is better to use semi-open intervals
-    * because of less ambiguities.  So, [a:b:c] will represent the set of
-    * values a, a + c, a + 2c ... a + nc
-    * such that a + nc < b.  That is, b lies outside the interval.
-    */
-
-   /* Allow for roundoff by adding 0.5 before truncation */
-   n = (int)(1.5 + ((xmax - xmin) / dx));
-   if (n <= 0)
-     n = 0;
-   else
-     {
-	double last = xmin + (n-1) * dx;
-
-	if (dx > 0.0)
-	  {
-	     if (last >= xmax)
-	       n -= 1;
-	  }
-	else if (last <= xmax)
-	  n -= 1;
-     }
-
-   dims = n;
-   if (NULL == (at = SLang_create_array1 (type, 0, NULL, &dims, 1, 1)))
-     return NULL;
-
-   if (type == SLANG_DOUBLE_TYPE)
-     {
-	double *ptr;
-
-	ptr = (double *) at->data;
-
-	for (i = 0; i < n; i++)
-	  ptr[i] = xmin + i * dx;
-     }
-   else
-     {
-	float *ptr;
-
-	ptr = (float *) at->data;
-
-	for (i = 0; i < n; i++)
-	  ptr[i] = (float) (xmin + i * dx);
-     }
-   return at;
-}
-#endif
-
-/* FIXME: Priority=medium
- * This needs to be updated to work with all integer types.
- */
-int _SLarray_inline_implicit_array (void)
-{
-   int int_vals[3];
-#if SLANG_HAS_FLOAT
-   double double_vals[3];
-#endif
-   int has_vals[3];
-   unsigned int i, count;
-   SLang_Array_Type *at;
-   int precedence;
-   unsigned char type;
-   int is_int;
-
-   count = SLang_Num_Function_Args;
-
-   if (count == 2)
-     has_vals [2] = 0;
-   else if (count != 3)
-     {
-	SLang_doerror ("wrong number of arguments to __implicit_inline_array");
-	return -1;
-     }
-
-#if SLANG_HAS_FLOAT
-   is_int = 1;
-#endif
-
-   type = 0;
-   precedence = 0;
-
-   i = count;
-   while (i--)
-     {
-	int this_type, this_precedence;
-
-	if (-1 == (this_type = SLang_peek_at_stack ()))
-	  return -1;
-
-	this_precedence = _SLarith_get_precedence ((unsigned char) this_type);
-	if (precedence < this_precedence)
-	  {
-	     type = (unsigned char) this_type;
-	     precedence = this_precedence;
-	  }
-
-	has_vals [i] = 1;
-
-	switch (this_type)
-	  {
-	   case SLANG_NULL_TYPE:
-	     has_vals[i] = 0;
-	     (void) SLdo_pop ();
-	     break;
-
-#if SLANG_HAS_FLOAT
-	   case SLANG_DOUBLE_TYPE:
-	   case SLANG_FLOAT_TYPE:
-	     if (-1 == SLang_pop_double (double_vals + i, NULL, NULL))
-	       return -1;
-	     is_int = 0;
-	     break;
-#endif
-	   default:
-	     if (-1 == SLang_pop_integer (int_vals + i))
-	       return -1;
-	     double_vals[i] = (double) int_vals[i];
-	  }
-     }
-
-#if SLANG_HAS_FLOAT
-   if (is_int == 0)
-     at = inline_implicit_floating_array (type,
-					  (has_vals[0] ? &double_vals[0] : NULL),
-					  (has_vals[1] ? &double_vals[1] : NULL),
-					  (has_vals[2] ? &double_vals[2] : NULL));
-   else
-#endif
-     at = inline_implicit_int_array ((has_vals[0] ? &int_vals[0] : NULL),
-				     (has_vals[1] ? &int_vals[1] : NULL),
-				     (has_vals[2] ? &int_vals[2] : NULL));
-
-   if (at == NULL)
-     return -1;
-
-   return SLang_push_array (at, 1);
-}
-
-int _SLarray_wildcard_array (void)
-{
-   SLang_Array_Type *at;
-     
-   if (NULL == (at = inline_implicit_int_array (NULL, NULL, NULL)))
-     return -1;
-
-   return SLang_push_array (at, 1);
-}
-
-static SLang_Array_Type *concat_arrays (unsigned int count)
-{
-   SLang_Array_Type **arrays;
-   SLang_Array_Type *at, *bt;
-   unsigned int i;
-   int num_elements;
-   unsigned char type;
-   char *src_data, *dest_data;
-   int is_ptr;
-   unsigned int sizeof_type;
-   int max_dims, min_dims, max_rows, min_rows;
-
-   arrays = (SLang_Array_Type **)SLmalloc (count * sizeof (SLang_Array_Type *));
-   if (arrays == NULL)
-     {
-	SLdo_pop_n (count);
-	return NULL;
-     }
-   SLMEMSET((char *) arrays, 0, count * sizeof(SLang_Array_Type *));
-
-   at = NULL;
-
-   num_elements = 0;
-   i = count;
-
-   while (i != 0)
-     {
-	i--;
-
-	if (-1 == SLang_pop_array (&bt, 1))
-	  goto free_and_return;
-
-	arrays[i] = bt;
-	num_elements += (int)bt->num_elements;
-     }
-
-   type = arrays[0]->data_type;
-   max_dims = min_dims = arrays[0]->num_dims;
-   min_rows = max_rows = arrays[0]->dims[0];
-
-   for (i = 1; i < count; i++)
-     {
-	SLang_Array_Type *ct;
-	int num;
-
-	bt = arrays[i];
-
-	num = bt->num_dims;
-	if (num > max_dims) max_dims = num;
-	if (num < min_dims) min_dims = num;
-
-	num = bt->dims[0];
-	if (num > max_rows) max_rows = num;
-	if (num < min_rows) min_rows = num;
-
-	if (type == bt->data_type)
-	  continue;
-
-	if (1 != _SLarray_typecast (bt->data_type, (VOID_STAR) &bt, 1,
-				    type, (VOID_STAR) &ct, 1))
-	  goto free_and_return;
-
-	SLang_free_array (bt);
-	arrays [i] = ct;
-     }
-
-   if (NULL == (at = SLang_create_array (type, 0, NULL, &num_elements, 1)))
-     goto free_and_return;
-
-   is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
-   sizeof_type = at->sizeof_type;
-   dest_data = (char *) at->data;
-
-   for (i = 0; i < count; i++)
-     {
-	bt = arrays[i];
-
-	src_data = (char *) bt->data;
-	num_elements = bt->num_elements;
-
-	if (-1 == transfer_n_elements (bt, (VOID_STAR)dest_data, (VOID_STAR)src_data, sizeof_type,
-				       num_elements, is_ptr))
-	  {
-	     SLang_free_array (at);
-	     at = NULL;
-	     goto free_and_return;
-	  }
-
-	dest_data += num_elements * sizeof_type;
-     }
-
-   /* If the arrays are all 1-d, and all the same size, then reshape to a
-    * 2-d array.  This will allow us to do, e.g.
-    * a = [[1,2], [3,4]]
-    * to specifiy a 2-d.
-    * Someday I will generalize this.
-    */
-   if ((max_dims == min_dims) && (max_dims == 1) && (min_rows == max_rows))
-     {
-	at->num_dims = 2;
-	at->dims[0] = count;
-	at->dims[1] = min_rows;
-     }
-
-   free_and_return:
-
-   for (i = 0; i < count; i++)
-     SLang_free_array (arrays[i]);
-   SLfree ((char *) arrays);
-
-   return at;
-}
-
-int _SLarray_inline_array (void)
-{
-   SLang_Object_Type *obj;
-   unsigned char type, this_type;
-   unsigned int count;
-   SLang_Array_Type *at;
-
-   obj = _SLStack_Pointer;
-
-   count = SLang_Num_Function_Args;
-   type = 0;
-
-   while ((count > 0) && (--obj >= _SLRun_Stack))
-     {
-	this_type = obj->data_type;
-
-	if (type == 0)
-	  type = this_type;
-
-	if ((type == this_type) || (type == SLANG_ARRAY_TYPE))
-	  {
-	     count--;
-	     continue;
-	  }
-
-	switch (this_type)
-	  {
-	   case SLANG_ARRAY_TYPE:
-	     type = SLANG_ARRAY_TYPE;
-	     break;
-
-	   case SLANG_INT_TYPE:
-	     switch (type)
-	       {
-#if SLANG_HAS_FLOAT
-		case SLANG_DOUBLE_TYPE:
-		  break;
-#endif
-#if SLANG_HAS_COMPLEX
-		case SLANG_COMPLEX_TYPE:
-		  break;
-#endif
-		default:
-		  goto type_mismatch;
-	       }
-	     break;
-#if SLANG_HAS_FLOAT
-	   case SLANG_DOUBLE_TYPE:
-	     switch (type)
-	       {
-		case SLANG_INT_TYPE:
-		  type = SLANG_DOUBLE_TYPE;
-		  break;
-# if SLANG_HAS_COMPLEX
-		case SLANG_COMPLEX_TYPE:
-		  break;
-# endif
-		default:
-		  goto type_mismatch;
-	       }
-	     break;
-#endif
-#if SLANG_HAS_COMPLEX
-	   case SLANG_COMPLEX_TYPE:
-	     switch (type)
-	       {
-		case SLANG_INT_TYPE:
-		case SLANG_DOUBLE_TYPE:
-		  type = SLANG_COMPLEX_TYPE;
-		  break;
-
-		default:
-		  goto type_mismatch;
-	       }
-	     break;
-#endif
-	   default:
-	     type_mismatch:
-	     _SLclass_type_mismatch_error (type, this_type);
-	     return -1;
-	  }
-	count--;
-     }
-
-   if (count != 0)
-     {
-	SLang_Error = SL_STACK_UNDERFLOW;
-	return -1;
-     }
-
-   count = SLang_Num_Function_Args;
-
-   if (count == 0)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED, "Empty inline-arrays not supported");
-	return -1;
-     }
-
-   if (type == SLANG_ARRAY_TYPE)
-     {
-	if (NULL == (at = concat_arrays (count)))
-	  return -1;
-     }
-   else
-     {
-	SLang_Object_Type index_obj;
-	int icount = (int) count;
-
-	if (NULL == (at = SLang_create_array (type, 0, NULL, &icount, 1)))
-	  return -1;
-
-	index_obj.data_type = SLANG_INT_TYPE;
-	while (count != 0)
-	  {
-	     count--;
-	     index_obj.v.int_val = (int) count;
-	     if (-1 == aput_from_indices (at, &index_obj, 1))
-	       {
-		  SLang_free_array (at);
-		  SLdo_pop_n (count);
-		  return -1;
-	       }
-	  }
-     }
-
-   return SLang_push_array (at, 1);
-}
-
-static int array_binary_op_result (int op, unsigned char a, unsigned char b,
-				   unsigned char *c)
-{
-   (void) op;
-   (void) a;
-   (void) b;
-   *c = SLANG_ARRAY_TYPE;
-   return 1;
-}
-
-static int array_binary_op (int op,
-			    unsigned char a_type, VOID_STAR ap, unsigned int na,
-			    unsigned char b_type, VOID_STAR bp, unsigned int nb,
-			    VOID_STAR cp)
-{
-   SLang_Array_Type *at, *bt, *ct;
-   unsigned int i, num_dims;
-   int (*binary_fun) (int,
-		      unsigned char, VOID_STAR, unsigned int,
-		      unsigned char, VOID_STAR, unsigned int,
-		      VOID_STAR);
-   SLang_Class_Type *a_cl, *b_cl, *c_cl;
-   int no_init;
-
-   if (a_type == SLANG_ARRAY_TYPE)
-     {
-	if (na != 1)
-	  {
-	     SLang_verror (SL_NOT_IMPLEMENTED, "Binary operation on multiple arrays not implemented");
-	     return -1;
-	  }
-
-	at = *(SLang_Array_Type **) ap;
-	if (-1 == coerse_array_to_linear (at))
-	  return -1;
-	ap = at->data;
-	a_type = at->data_type;
-	na = at->num_elements;
-     }
-   else
-     {
-	at = NULL;
-     }
-
-   if (b_type == SLANG_ARRAY_TYPE)
-     {
-	if (nb != 1)
-	  {
-	     SLang_verror (SL_NOT_IMPLEMENTED, "Binary operation on multiple arrays not implemented");
-	     return -1;
-	  }
-
-	bt = *(SLang_Array_Type **) bp;
-	if (-1 == coerse_array_to_linear (bt))
-	  return -1;
-	bp = bt->data;
-	b_type = bt->data_type;
-	nb = bt->num_elements;
-     }
-   else
-     {
-	bt = NULL;
-     }
-
-   if ((at != NULL) && (bt != NULL))
-     {
-	num_dims = at->num_dims;
-
-	if (num_dims != bt->num_dims)
-	  {
-	     SLang_verror (SL_TYPE_MISMATCH, "Arrays must have same dim for binary operation");
-	     return -1;
-	  }
-
-	for (i = 0; i < num_dims; i++)
-	  {
-	     if (at->dims[i] != bt->dims[i])
-	       {
-		  SLang_verror (SL_TYPE_MISMATCH, "Arrays must be the same for binary operation");
-		  return -1;
-	       }
-	  }
-     }
-
-   a_cl = _SLclass_get_class (a_type);
-   b_cl = _SLclass_get_class (b_type);
-
-   if (NULL == (binary_fun = _SLclass_get_binary_fun (op, a_cl, b_cl, &c_cl, 1)))
-     return -1;
-
-   no_init = ((c_cl->cl_class_type == SLANG_CLASS_TYPE_SCALAR)
-	      || (c_cl->cl_class_type == SLANG_CLASS_TYPE_VECTOR));
-
-   ct = NULL;
-#if _SLANG_USE_TMP_OPTIMIZATION
-   /* If we are dealing with scalar (or vector) objects, and if the object
-    * appears to be owned by the stack, then use it instead of creating a 
-    * new version.  This can happen with code such as:
-    * @  x = [1,2,3,4];
-    * @  x = __tmp(x) + 1;
-    */
-   if (no_init)
-     {
-	if ((at != NULL) 
-	    && (at->num_refs == 1)
-	    && (at->data_type == c_cl->cl_data_type))
-	  {
-	     ct = at;
-	     ct->num_refs = 2;
-	  }
-	else if ((bt != NULL) 
-	    && (bt->num_refs == 1)
-	    && (bt->data_type == c_cl->cl_data_type))
-	  {
-	     ct = bt;
-	     ct->num_refs = 2;
-	  }
-     }
-#endif				       /* _SLANG_USE_TMP_OPTIMIZATION */
-   
-   if (ct == NULL)
-     {
-	if (at != NULL) ct = at; else ct = bt;
-	ct = SLang_create_array1 (c_cl->cl_data_type, 0, NULL, ct->dims, ct->num_dims, no_init);
-	if (ct == NULL)
-	  return -1;
-     }
-
-
-   if ((na == 0) || (nb == 0)	       /* allow empty arrays */
-       || (1 == (*binary_fun) (op, a_type, ap, na, b_type, bp, nb, ct->data)))
-     {
-	*(SLang_Array_Type **) cp = ct;
-	return 1;
-     }
-
-   SLang_free_array (ct);
-   return -1;
-}
-
-static void array_where (void)
-{
-   SLang_Array_Type *at, *bt;
-   char *a_data;
-   int *b_data;
-   unsigned int i, num_elements;
-   int b_num;
-
-   if (-1 == SLang_pop_array (&at, 1))
-     return;
-
-   bt = NULL;
-
-   if (at->data_type != SLANG_CHAR_TYPE)
-     {
-	int zero;
-	SLang_Array_Type *tmp_at;
-
-	tmp_at = at;
-	zero = 0;
-	if (1 != array_binary_op (SLANG_NE,
-				  SLANG_ARRAY_TYPE, (VOID_STAR) &at, 1,
-				  SLANG_CHAR_TYPE, (VOID_STAR) &zero, 1,
-				  (VOID_STAR) &tmp_at))
-	    goto return_error;
-
-	SLang_free_array (at);
-	at = tmp_at;
-	if (at->data_type != SLANG_CHAR_TYPE)
-	  {
-	     SLang_Error = SL_TYPE_MISMATCH;
-	     goto return_error;
-	  }
-     }
-
-   a_data = (char *) at->data;
-   num_elements = at->num_elements;
-
-   b_num = 0;
-   for (i = 0; i < num_elements; i++)
-     if (a_data[i] != 0) b_num++;
-
-   if (NULL == (bt = SLang_create_array1 (SLANG_INT_TYPE, 0, NULL, &b_num, 1, 1)))
-     goto return_error;
-
-   b_data = (int *) bt->data;
-
-   i = 0;
-   while (b_num)
-     {
-	if (a_data[i] != 0)
-	  {
-	     *b_data++ = i;
-	     b_num--;
-	  }
-
-	i++;
-     }
-
-   (void) SLang_push_array (bt, 0);
-   /* drop */
-
-   return_error:
-   SLang_free_array (at);
-   SLang_free_array (bt);
-}
-
-static int do_array_reshape (SLang_Array_Type *at, SLang_Array_Type *ind_at)
-{
-   int *dims;
-   unsigned int i, num_dims;
-   unsigned int num_elements;
-
-   if ((ind_at->data_type != SLANG_INT_TYPE)
-       || (ind_at->num_dims != 1))
-     {
-	SLang_verror (SL_TYPE_MISMATCH, "Expecting 1-d integer array");
-	return -1;
-     }
-
-   num_dims = ind_at->num_elements;
-   dims = (int *) ind_at->data;
-
-   num_elements = 1;
-   for (i = 0; i < num_dims; i++)
-     {
-	int d = dims[i];
-	if (d < 0)
-	  {
-	     SLang_verror (SL_INVALID_PARM, "reshape: dimension is less then 0");
-	     return -1;
-	  }
-
-	num_elements = (unsigned int) d * num_elements;
-     }
-
-   if ((num_elements != at->num_elements)
-       || (num_dims > SLARRAY_MAX_DIMS))
-     {
-	SLang_verror (SL_INVALID_PARM, "Unable to reshape array to specified size");
-	return -1;
-     }
-
-   for (i = 0; i < num_dims; i++)
-     at->dims [i] = dims[i];
-
-   while (i < SLARRAY_MAX_DIMS)
-     {
-	at->dims [i] = 1;
-	i++;
-     }
-
-   at->num_dims = num_dims;
-   return 0;
-}
-
-static void array_reshape (SLang_Array_Type *at, SLang_Array_Type *ind_at)
-{
-   (void) do_array_reshape (at, ind_at);
-}
-
-static void _array_reshape (SLang_Array_Type *ind_at)
-{
-   SLang_Array_Type *at;
-   SLang_Array_Type *new_at;
-
-   if (-1 == SLang_pop_array (&at, 1))
-     return;
-
-   /* FIXME: Priority=low: duplicate_array could me modified to look at num_refs */
-
-   /* Now try to avoid the overhead of creating a new array if possible */
-   if (at->num_refs == 1)
-     {
-	/* Great, we are the sole owner of this array. */
-	if ((-1 == do_array_reshape (at, ind_at))
-	    || (-1 == SLclass_push_ptr_obj (SLANG_ARRAY_TYPE, (VOID_STAR)at)))
-	  SLang_free_array (at);
-	return;
-     }
-
-   new_at = SLang_duplicate_array (at);
-   if (new_at != NULL)
-     {
-	if (0 == do_array_reshape (new_at, ind_at))
-	  (void) SLang_push_array (new_at, 0);
-	
-	SLang_free_array (new_at);
-     }
-   SLang_free_array (at);
-}
-
-typedef struct
-{
-   SLang_Array_Type *at;
-   unsigned int increment;
-   char *addr;
-}
-Map_Arg_Type;
-/* Usage: array_map (Return-Type, func, args,....); */
-static void array_map (void)
-{
-   Map_Arg_Type *args;
-   unsigned int num_args;
-   unsigned int i, i_control;
-   SLang_Name_Type *nt;
-   unsigned int num_elements;
-   SLang_Array_Type *at;
-   char *addr;
-   unsigned char type;
-
-   at = NULL;
-   args = NULL;
-   nt = NULL;
-
-   if (SLang_Num_Function_Args < 3)
-     {
-	SLang_verror (SL_INVALID_PARM,
-		      "Usage: array_map (Return-Type, &func, args...)");
-	SLdo_pop_n (SLang_Num_Function_Args);
-	return;
-     }
-
-   num_args = (unsigned int)SLang_Num_Function_Args - 2;
-   args = (Map_Arg_Type *) SLmalloc (num_args * sizeof (Map_Arg_Type));
-   if (args == NULL)
-     {
-	SLdo_pop_n (SLang_Num_Function_Args);
-	return;
-     }
-   memset ((char *) args, 0, num_args * sizeof (Map_Arg_Type));
-   i = num_args;
-   i_control = 0;
-   while (i > 0)
-     {
-	i--;
-	if (-1 == SLang_pop_array (&args[i].at, 1))
-	  {
-	     SLdo_pop_n (i + 2);
-	     goto return_error;
-	  }
-	if (args[i].at->num_elements > 1)
-	  i_control = i;
-     }
-
-   if (NULL == (nt = SLang_pop_function ()))
-     {
-	SLdo_pop_n (1);
-	goto return_error;
-     }
-
-   num_elements = args[i_control].at->num_elements;
-
-   if (-1 == _SLang_pop_datatype (&type))
-     goto return_error;
-
-   if (type == SLANG_UNDEFINED_TYPE)   /* Void_Type */
-     at = NULL;
-   else
-     {
-	at = args[i_control].at;
-
-	if (NULL == (at = SLang_create_array (type, 0, NULL, at->dims, at->num_dims)))
-	  goto return_error;
-     }
-   
-
-   for (i = 0; i < num_args; i++)
-     {
-	SLang_Array_Type *ati = args[i].at;
-	/* FIXME: Priority = low: The actual dimensions should be compared. */
-	if (ati->num_elements == num_elements)
-	  args[i].increment = ati->sizeof_type;
-	/* memset already guarantees increment to be zero */
-
-	if (ati->num_elements == 0)
-	  {
-	     SLang_verror (0, "array_map: function argument %d of %d is an empty array", 
-			   i+1, num_args);
-	     goto return_error;
-	  }
-
-	args[i].addr = (char *) ati->data;
-     }
-
-   if (at == NULL)
-     addr = NULL;
-   else
-     addr = (char *)at->data;
-
-   for (i = 0; i < num_elements; i++)
-     {
-	unsigned int j;
-
-	if (-1 == SLang_start_arg_list ())
-	  goto return_error;
-
-	for (j = 0; j < num_args; j++)
-	  {
-	     if (-1 == push_element_at_addr (args[j].at, 
-					     (VOID_STAR) args[j].addr,
-					     1))
-	       {
-		  SLdo_pop_n (j);
-		  goto return_error;
-	       }
-
-	     args[j].addr += args[j].increment;
-	  }
-
-	if (-1 == SLang_end_arg_list ())
-	  {
-	     SLdo_pop_n (num_args);
-	     goto return_error;
-	  }
-
-	if (-1 == SLexecute_function (nt))
-	  goto return_error;
-
-	if (at == NULL)
-	  continue;
-
-	if (-1 == at->cl->cl_apop (type, (VOID_STAR) addr))
-	  goto return_error;
-
-	addr += at->sizeof_type;
-     }
-
-   if (at != NULL)
-     (void) SLang_push_array (at, 0);
-
-   /* drop */
-
-   return_error:
-   SLang_free_array (at);
-   SLang_free_function (nt);
-   if (args != NULL)
-     {
-	for (i = 0; i < num_args; i++)
-	  SLang_free_array (args[i].at);
-
-	SLfree ((char *) args);
-     }
-}
-
-static SLang_Intrin_Fun_Type Array_Table [] =
-{
-   MAKE_INTRINSIC_0("array_map", array_map, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("array_sort", sort_array, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_1("array_to_bstring", array_to_bstring, SLANG_VOID_TYPE, SLANG_ARRAY_TYPE),
-   MAKE_INTRINSIC_1("bstring_to_array", bstring_to_array, SLANG_VOID_TYPE, SLANG_BSTRING_TYPE),
-   MAKE_INTRINSIC("init_char_array", init_char_array, SLANG_VOID_TYPE, 0),
-   MAKE_INTRINSIC("array_info", array_info, SLANG_VOID_TYPE, 0),
-   MAKE_INTRINSIC("where", array_where, SLANG_VOID_TYPE, 0),
-   MAKE_INTRINSIC_2("reshape", array_reshape, SLANG_VOID_TYPE, SLANG_ARRAY_TYPE, SLANG_ARRAY_TYPE),
-   MAKE_INTRINSIC_1("_reshape", _array_reshape, SLANG_VOID_TYPE, SLANG_ARRAY_TYPE),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-static char *array_string (unsigned char type, VOID_STAR v)
-{
-   SLang_Array_Type *at;
-   char buf[512];
-   unsigned int i, num_dims;
-   int *dims;
-
-   at = *(SLang_Array_Type **) v;
-   type = at->data_type;
-   num_dims = at->num_dims;
-   dims = at->dims;
-
-   sprintf (buf, "%s[%d", SLclass_get_datatype_name (type), at->dims[0]);
-
-   for (i = 1; i < num_dims; i++)
-     sprintf (buf + strlen(buf), ",%d", dims[i]);
-   strcat (buf, "]");
-
-   return SLmake_string (buf);
-}
-
-static void array_destroy (unsigned char type, VOID_STAR v)
-{
-   (void) type;
-   SLang_free_array (*(SLang_Array_Type **) v);
-}
-
-static int array_push (unsigned char type, VOID_STAR v)
-{
-   SLang_Array_Type *at;
-
-   (void) type;
-   at = *(SLang_Array_Type **) v;
-   return SLang_push_array (at, 0);
-}
-
-/* Intrinsic arrays are not stored in a variable. So, the address that
- * would contain the variable holds the array address.
- */
-static int array_push_intrinsic (unsigned char type, VOID_STAR v)
-{
-   (void) type;
-   return SLang_push_array ((SLang_Array_Type *) v, 0);
-}
-
-int _SLarray_add_bin_op (unsigned char type)
-{
-   SL_OOBinary_Type *ab;
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   ab = cl->cl_binary_ops;
-
-   while (ab != NULL)
-     {
-	if (ab->data_type == SLANG_ARRAY_TYPE)
-	  return 0;
-	ab = ab->next;
-     }
-
-   if ((-1 == SLclass_add_binary_op (SLANG_ARRAY_TYPE, type, array_binary_op, array_binary_op_result))
-       || (-1 == SLclass_add_binary_op (type, SLANG_ARRAY_TYPE, array_binary_op, array_binary_op_result)))
-     return -1;
-
-   return 0;
-}
-
-static SLang_Array_Type *
-do_array_math_op (int op, int unary_type,
-		  SLang_Array_Type *at, unsigned int na)
-{
-   unsigned char a_type, b_type;
-   int (*f) (int, unsigned char, VOID_STAR, unsigned int, VOID_STAR);
-   SLang_Array_Type *bt;
-   SLang_Class_Type *b_cl;
-   int no_init;
-
-   if (na != 1)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED, "Operation restricted to 1 array");
-	return NULL;
-     }
-
-   a_type = at->data_type;
-   if (NULL == (f = _SLclass_get_unary_fun (op, at->cl, &b_cl, unary_type)))
-     return NULL;
-   b_type = b_cl->cl_data_type;
-
-   if (-1 == coerse_array_to_linear (at))
-     return NULL;
-
-   no_init = ((b_cl->cl_class_type == SLANG_CLASS_TYPE_SCALAR)
-	      || (b_cl->cl_class_type == SLANG_CLASS_TYPE_VECTOR));
-
-#if _SLANG_USE_TMP_OPTIMIZATION
-   /* If we are dealing with scalar (or vector) objects, and if the object
-    * appears to be owned by the stack, then use it instead of creating a 
-    * new version.  This can happen with code such as:
-    * @  x = [1,2,3,4];
-    * @  x = UNARY_OP(__tmp(x));
-    */
-   if (no_init
-       && (at->num_refs == 1)
-       && (at->data_type == b_cl->cl_data_type))
-     {
-	bt = at;
-	bt->num_refs = 2;
-     }
-   else
-#endif				       /* _SLANG_USE_TMP_OPTIMIZATION */
-     if (NULL == (bt = SLang_create_array1 (b_type, 0, NULL, at->dims, at->num_dims, no_init)))
-       return NULL;
-
-   if (1 != (*f)(op, a_type, at->data, at->num_elements, bt->data))
-     {
-	SLang_free_array (bt);
-	return NULL;
-     }
-   return bt;
-}
-
-static int
-array_unary_op_result (int op, unsigned char a, unsigned char *b)
-{
-   (void) op;
-   (void) a;
-   *b = SLANG_ARRAY_TYPE;
-   return 1;
-}
-
-static int
-array_unary_op (int op,
-		unsigned char a, VOID_STAR ap, unsigned int na,
-		VOID_STAR bp)
-{
-   SLang_Array_Type *at;
-
-   (void) a;
-   at = *(SLang_Array_Type **) ap;
-   if (NULL == (at = do_array_math_op (op, _SLANG_BC_UNARY, at, na)))
-     {
-	if (SLang_Error) return -1;
-	return 0;
-     }
-   *(SLang_Array_Type **) bp = at;
-   return 1;
-}
-
-static int
-array_math_op (int op,
-	       unsigned char a, VOID_STAR ap, unsigned int na,
-	       VOID_STAR bp)
-{
-   SLang_Array_Type *at;
-
-   (void) a;
-   at = *(SLang_Array_Type **) ap;
-   if (NULL == (at = do_array_math_op (op, _SLANG_BC_MATH_UNARY, at, na)))
-     {
-	if (SLang_Error) return -1;
-	return 0;
-     }
-   *(SLang_Array_Type **) bp = at;
-   return 1;
-}
-
-static int
-array_app_op (int op,
-	      unsigned char a, VOID_STAR ap, unsigned int na,
-	      VOID_STAR bp)
-{
-   SLang_Array_Type *at;
-
-   (void) a;
-   at = *(SLang_Array_Type **) ap;
-   if (NULL == (at = do_array_math_op (op, _SLANG_BC_APP_UNARY, at, na)))
-     {
-	if (SLang_Error) return -1;
-	return 0;
-     }
-   *(SLang_Array_Type **) bp = at;
-   return 1;
-}
-
-int
-_SLarray_typecast (unsigned char a_type, VOID_STAR ap, unsigned int na,
-		   unsigned char b_type, VOID_STAR bp,
-		   int is_implicit)
-{
-   SLang_Array_Type *at, *bt;
-   SLang_Class_Type *b_cl;
-   int no_init;
-   int (*t) (unsigned char, VOID_STAR, unsigned int, unsigned char, VOID_STAR);
-
-   if (na != 1)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED, "typecast of multiple arrays not implemented");
-	return -1;
-     }
-
-   at = *(SLang_Array_Type **) ap;
-   a_type = at->data_type;
-
-   if (a_type == b_type)
-     {
-	at->num_refs += 1;
-	*(SLang_Array_Type **) bp = at;
-	return 1;
-     }
-
-   if (NULL == (t = _SLclass_get_typecast (a_type, b_type, is_implicit)))
-     return -1;
-
-   if (-1 == coerse_array_to_linear (at))
-     return -1;
-
-   b_cl = _SLclass_get_class (b_type);
-
-   no_init = ((b_cl->cl_class_type == SLANG_CLASS_TYPE_SCALAR)
-	      || (b_cl->cl_class_type == SLANG_CLASS_TYPE_VECTOR));
-
-   if (NULL == (bt = SLang_create_array1 (b_type, 0, NULL, at->dims, at->num_dims, no_init)))
-     return -1;
-
-   if (1 == (*t) (a_type, at->data, at->num_elements, b_type, bt->data))
-     {
-	*(SLang_Array_Type **) bp = bt;
-	return 1;
-     }
-
-   SLang_free_array (bt);
-   return 0;
-}
-
-SLang_Array_Type *SLang_duplicate_array (SLang_Array_Type *at)
-{
-   SLang_Array_Type *bt;
-   char *data, *a_data;
-   unsigned int i, num_elements, sizeof_type;
-   unsigned int size;
-   int (*cl_acopy) (unsigned char, VOID_STAR, VOID_STAR);
-   unsigned char type;
-
-   if (-1 == coerse_array_to_linear (at))
-     return NULL;
-
-   type = at->data_type;
-   num_elements = at->num_elements;
-   sizeof_type = at->sizeof_type;
-   size = num_elements * sizeof_type;
-
-   if (NULL == (data = SLmalloc (size)))
-     return NULL;
-
-   if (NULL == (bt = SLang_create_array (type, 0, (VOID_STAR)data, at->dims, at->num_dims)))
-     {
-	SLfree (data);
-	return NULL;
-     }
-
-   a_data = (char *) at->data;
-   if (0 == (at->flags & SLARR_DATA_VALUE_IS_POINTER))
-     {
-	SLMEMCPY (data, a_data, size);
-	return bt;
-     }
-
-   SLMEMSET (data, 0, size);
-
-   cl_acopy = at->cl->cl_acopy;
-   for (i = 0; i < num_elements; i++)
-     {
-	if (NULL != *(VOID_STAR *) a_data)
-	  {
-	     if (-1 == (*cl_acopy) (type, (VOID_STAR) a_data, (VOID_STAR) data))
-	       {
-		  SLang_free_array (bt);
-		  return NULL;
-	       }
-	  }
-
-	data += sizeof_type;
-	a_data += sizeof_type;
-     }
-
-   return bt;
-}
-
-static int array_dereference (unsigned char type, VOID_STAR addr)
-{
-   SLang_Array_Type *at;
-
-   (void) type;
-   at = SLang_duplicate_array (*(SLang_Array_Type **) addr);
-   if (at == NULL) return -1;
-   return SLang_push_array (at, 1);
-}
-
-/* This function gets called via, e.g., @Array_Type (Double_Type, [10,20]);
- */
-static int
-array_datatype_deref (unsigned char type)
-{
-   SLang_Array_Type *ind_at;
-   SLang_Array_Type *at;
-
-#if 0
-   /* The parser generated code for this as if a function call were to be
-    * made.  However, the interpreter simply called the deref object routine
-    * instead of the function call.  So, I must simulate the function call.
-    * This needs to be formalized to hide this detail from applications
-    * who wish to do the same.  So...
-    * FIXME: Priority=medium
-    */
-   if (0 == _SL_increment_frame_pointer ())
-     (void) _SL_decrement_frame_pointer ();
-#endif
-
-   if (-1 == SLang_pop_array (&ind_at, 1))
-     return -1;
-
-   if ((ind_at->data_type != SLANG_INT_TYPE)
-       || (ind_at->num_dims != 1))
-     {
-	SLang_verror (SL_TYPE_MISMATCH, "Expecting 1-d integer array");
-	goto return_error;
-     }
-
-   if (-1 == _SLang_pop_datatype (&type))
-     goto return_error;
-
-   if (NULL == (at = SLang_create_array (type, 0, NULL,
-					 (int *) ind_at->data,
-					 ind_at->num_elements)))
-     goto return_error;
-
-   SLang_free_array (ind_at);
-   return SLang_push_array (at, 1);
-
-   return_error:
-   SLang_free_array (ind_at);
-   return -1;
-}
-
-static int array_length (unsigned char type, VOID_STAR v, unsigned int *len)
-{
-   SLang_Array_Type *at;
-
-   (void) type;
-   at = *(SLang_Array_Type **) v;
-   *len = at->num_elements;
-   return 0;
-}
-
-int
-_SLarray_init_slarray (void)
-{
-   SLang_Class_Type *cl;
-
-   if (-1 == SLadd_intrin_fun_table (Array_Table, NULL))
-     return -1;
-
-   if (NULL == (cl = SLclass_allocate_class ("Array_Type")))
-     return -1;
-
-   (void) SLclass_set_string_function (cl, array_string);
-   (void) SLclass_set_destroy_function (cl, array_destroy);
-   (void) SLclass_set_push_function (cl, array_push);
-   cl->cl_push_intrinsic = array_push_intrinsic;
-   cl->cl_dereference = array_dereference;
-   cl->cl_datatype_deref = array_datatype_deref;
-   cl->cl_length = array_length;
-
-   if (-1 == SLclass_register_class (cl, SLANG_ARRAY_TYPE, sizeof (VOID_STAR),
-				     SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   if ((-1 == SLclass_add_binary_op (SLANG_ARRAY_TYPE, SLANG_ARRAY_TYPE, array_binary_op, array_binary_op_result))
-       || (-1 == SLclass_add_unary_op (SLANG_ARRAY_TYPE, array_unary_op, array_unary_op_result))
-       || (-1 == SLclass_add_app_unary_op (SLANG_ARRAY_TYPE, array_app_op, array_unary_op_result))
-       || (-1 == SLclass_add_math_op (SLANG_ARRAY_TYPE, array_math_op, array_unary_op_result))
-       || (-1 == SLclass_add_math_op (SLANG_ARRAY_TYPE, array_math_op, array_unary_op_result)))
-     return -1;
-
-   return 0;
-}
-
-int SLang_pop_array (SLang_Array_Type **at_ptr, int convert_scalar)
-{
-   if (-1 == pop_array (at_ptr, convert_scalar))
-     return -1;
-
-   if (-1 == coerse_array_to_linear (*at_ptr))
-     {
-	SLang_free_array (*at_ptr);
-	return -1;
-     }
-   return 0;
-}
-
-int SLang_pop_array_of_type (SLang_Array_Type **at, unsigned char type)
-{
-   if (-1 == SLclass_typecast (type, 1, 1))
-     return -1;
-
-   return SLang_pop_array (at, 1);
-}
-
-void (*_SLang_Matrix_Multiply)(void);
-
-int _SLarray_matrix_multiply (void)
-{
-   if (_SLang_Matrix_Multiply != NULL)
-     {
-	(*_SLang_Matrix_Multiply)();
-	return 0;
-     }
-   SLang_verror (SL_NOT_IMPLEMENTED, "Matrix multiplication not available");
-   return -1;
-}
-
-struct _SLang_Foreach_Context_Type
-{
-   SLang_Array_Type *at;
-   unsigned int next_element_index;
-};
-
-SLang_Foreach_Context_Type *
-_SLarray_cl_foreach_open (unsigned char type, unsigned int num)
-{
-   SLang_Foreach_Context_Type *c;
-
-   if (num != 0)
-     {
-	SLdo_pop_n (num + 1);
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "%s does not support 'foreach using' form",
-		      SLclass_get_datatype_name (type));
-	return NULL;
-     }
-
-   if (NULL == (c = (SLang_Foreach_Context_Type *) SLmalloc (sizeof (SLang_Foreach_Context_Type))))
-     return NULL;
-
-   memset ((char *) c, 0, sizeof (SLang_Foreach_Context_Type));
-
-   if (-1 == pop_array (&c->at, 1))
-     {
-	SLfree ((char *) c);
-	return NULL;
-     }
-
-   return c;
-}
-
-void _SLarray_cl_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   (void) type;
-   if (c == NULL) return;
-   SLang_free_array (c->at);
-   SLfree ((char *) c);
-}
-
-int _SLarray_cl_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   SLang_Array_Type *at;
-   VOID_STAR data;
-
-   (void) type;
-
-   if (c == NULL)
-     return -1;
-
-   at = c->at;
-   if (at->num_elements == c->next_element_index)
-     return 0;
-
-   /* FIXME: Priority = low.  The following assumes linear arrays
-    * or Integer range arrays.  Fixing it right requires a method to get the
-    * nth element of a multidimensional array.
-    */
-
-   if (at->flags & SLARR_DATA_VALUE_IS_RANGE)
-     {
-	int d = (int) c->next_element_index;
-	data = range_get_data_addr (at, &d);
-     }
-   else
-     data = (VOID_STAR) ((char *)at->data + (c->next_element_index * at->sizeof_type));
-
-   c->next_element_index += 1;
-
-   if ((at->flags & SLARR_DATA_VALUE_IS_POINTER)
-       && (*(VOID_STAR *) data == NULL))
-     {
-	if (-1 == SLang_push_null ())
-	  return -1;
-     }
-   else if (-1 == (*at->cl->cl_apush)(at->data_type, data))
-     return -1;
-
-   /* keep going */
-   return 1;
-}
-
diff --git a/mdk-stage1/slang/slarrfun.c b/mdk-stage1/slang/slarrfun.c
deleted file mode 100644
index bfa6ec5e5..000000000
--- a/mdk-stage1/slang/slarrfun.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/* Advanced array manipulation routines for S-Lang */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static int next_transposed_index (int *dims, int *max_dims, unsigned int num_dims)
-{
-   int i;
-
-   for (i = 0; i < (int) num_dims; i++)
-     {
-	int dims_i;
-
-	dims_i = dims [i] + 1;
-	if (dims_i != (int) max_dims [i])
-	  {
-	     dims [i] = dims_i;
-	     return 0;
-	  }
-	dims [i] = 0;
-     }
-
-   return -1;
-}
-
-static SLang_Array_Type *allocate_transposed_array (SLang_Array_Type *at)
-{
-   unsigned int num_elements;
-   SLang_Array_Type *bt;
-   VOID_STAR b_data;
-
-   num_elements = at->num_elements;
-   b_data = (VOID_STAR) SLmalloc (at->sizeof_type * num_elements);
-   if (b_data == NULL)
-     return NULL;
-
-   bt = SLang_create_array (at->data_type, 0, b_data, at->dims, 2);
-   if (bt == NULL)
-     {
-	SLfree ((char *)b_data);
-	return NULL;
-     }
-
-   bt->dims[1] = at->dims[0];
-   bt->dims[0] = at->dims[1];
-
-   return bt;
-}
-
-#define GENERIC_TYPE float
-#define TRANSPOSE_2D_ARRAY transpose_floats
-#define GENERIC_TYPE_A float
-#define GENERIC_TYPE_B float
-#define GENERIC_TYPE_C float
-#define INNERPROD_FUNCTION innerprod_float_float
-#if SLANG_HAS_COMPLEX
-# define INNERPROD_COMPLEX_A innerprod_complex_float
-# define INNERPROD_A_COMPLEX innerprod_float_complex
-#endif
-#include "slarrfun.inc"
-
-#define GENERIC_TYPE double
-#define TRANSPOSE_2D_ARRAY transpose_doubles
-#define GENERIC_TYPE_A double
-#define GENERIC_TYPE_B double
-#define GENERIC_TYPE_C double
-#define INNERPROD_FUNCTION innerprod_double_double
-#if SLANG_HAS_COMPLEX
-# define INNERPROD_COMPLEX_A innerprod_complex_double
-# define INNERPROD_A_COMPLEX innerprod_double_complex
-#endif
-#include "slarrfun.inc"
-
-#define GENERIC_TYPE_A double
-#define GENERIC_TYPE_B float
-#define GENERIC_TYPE_C double
-#define INNERPROD_FUNCTION innerprod_double_float
-#include "slarrfun.inc"
-
-#define GENERIC_TYPE_A float
-#define GENERIC_TYPE_B double
-#define GENERIC_TYPE_C double
-#define INNERPROD_FUNCTION innerprod_float_double
-#include "slarrfun.inc"
-
-/* Finally pick up the complex_complex multiplication
- * and do the integers
- */
-#if SLANG_HAS_COMPLEX
-# define INNERPROD_COMPLEX_COMPLEX innerprod_complex_complex
-#endif
-#define GENERIC_TYPE int
-#define TRANSPOSE_2D_ARRAY transpose_ints
-#include "slarrfun.inc"
-
-#if SIZEOF_LONG != SIZEOF_INT
-# define GENERIC_TYPE long
-# define TRANSPOSE_2D_ARRAY transpose_longs
-# include "slarrfun.inc"
-#else
-# define transpose_longs transpose_ints
-#endif
-
-#if SIZEOF_SHORT != SIZEOF_INT
-# define GENERIC_TYPE short
-# define TRANSPOSE_2D_ARRAY transpose_shorts
-# include "slarrfun.inc"
-#else
-# define transpose_shorts transpose_ints
-#endif
-
-#define GENERIC_TYPE char
-#define TRANSPOSE_2D_ARRAY transpose_chars
-#include "slarrfun.inc"
-
-/* This routine works only with linear arrays */
-static SLang_Array_Type *transpose (SLang_Array_Type *at)
-{
-   int dims [SLARRAY_MAX_DIMS];
-   int *max_dims;
-   unsigned int num_dims;
-   SLang_Array_Type *bt;
-   int i;
-   unsigned int sizeof_type;
-   int is_ptr;
-   char *b_data;
-
-   max_dims = at->dims;
-   num_dims = at->num_dims;
-
-   if ((at->num_elements == 0)
-       || (num_dims == 1))
-     {
-	bt = SLang_duplicate_array (at);
-	if (num_dims == 1) bt->num_dims = 2;
-	goto transpose_dims;
-     }
-
-   /* For numeric arrays skip the overhead below */
-   if (num_dims == 2)
-     {
-	bt = allocate_transposed_array (at);
-	if (bt == NULL) return NULL;
-
-	switch (at->data_type)
-	  {
-	   case SLANG_INT_TYPE:
-	   case SLANG_UINT_TYPE:
-	     return transpose_ints (at, bt);
-	   case SLANG_DOUBLE_TYPE:
-	    return transpose_doubles (at, bt);
-	   case SLANG_FLOAT_TYPE:
-	     return transpose_floats (at, bt);
-	   case SLANG_CHAR_TYPE:
-	   case SLANG_UCHAR_TYPE:
-	     return transpose_chars (at, bt);
-	   case SLANG_LONG_TYPE:
-	   case SLANG_ULONG_TYPE:
-	     return transpose_longs (at, bt);
-	   case SLANG_SHORT_TYPE:
-	   case SLANG_USHORT_TYPE:
-	     return transpose_shorts (at, bt);
-	  }
-     }
-   else
-     {
-	bt = SLang_create_array (at->data_type, 0, NULL, max_dims, num_dims);
-	if (bt == NULL) return NULL;
-     }
-
-   sizeof_type = at->sizeof_type;
-   is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
-
-   memset ((char *)dims, 0, sizeof(dims));
-
-   b_data = (char *) bt->data;
-
-   do
-     {
-	if (-1 == _SLarray_aget_transfer_elem (at, dims, (VOID_STAR) b_data,
-					       sizeof_type, is_ptr))
-	  {
-	     SLang_free_array (bt);
-	     return NULL;
-	  }
-	b_data += sizeof_type;
-     }
-   while (0 == next_transposed_index (dims, max_dims, num_dims));
-
-   transpose_dims:
-
-   num_dims = bt->num_dims;
-   for (i = 0; i < (int) num_dims; i++)
-     bt->dims[i] = max_dims [num_dims - i - 1];
-
-   return bt;
-}
-
-static void array_transpose (SLang_Array_Type *at)
-{
-   if (NULL != (at = transpose (at)))
-     (void) SLang_push_array (at, 1);
-}
-
-static int get_inner_product_parms (SLang_Array_Type *a, int *dp,
-				    unsigned int *loops, unsigned int *other)
-{
-   int num_dims;
-   int d;
-   
-   d = *dp;
-   
-   num_dims = (int)a->num_dims;
-   if (num_dims == 0) 
-     {
-	SLang_verror (SL_INVALID_PARM, "Inner-product operation requires an array of at least 1 dimension.");
-	return -1;
-     }
-
-   /* An index of -1 refers to last dimension */
-   if (d == -1)
-     d += num_dims;
-   *dp = d;
-
-   if (a->num_elements == 0)
-     {				       /* [] # [] ==> [] */
-	*loops = *other = 0;
-	return 0;
-     }
-
-   *loops = a->num_elements / a->dims[d];
-
-   if (d == 0)
-     {
-	*other = *loops;  /* a->num_elements / a->dims[0]; */
-	return 0;
-     }
-   
-   *other = a->dims[d];
-   return 0;
-}
-
-/* This routines takes two arrays A_i..j and B_j..k and produces a third
- * via C_i..k = A_i..j B_j..k.
- * 
- * If A is a vector, and B is a 2-d matrix, then regard A as a 2-d matrix
- * with 1-column.
- */
-static void do_inner_product (void)
-{
-   SLang_Array_Type *a, *b, *c;
-   void (*fun)(SLang_Array_Type *, SLang_Array_Type *, SLang_Array_Type *,
-	       unsigned int, unsigned int, unsigned int, unsigned int, 
-	       unsigned int);
-   unsigned char c_type;
-   int dims[SLARRAY_MAX_DIMS];
-   int status;
-   unsigned int a_loops, b_loops, b_inc, a_stride;
-   int ai_dims, i, j;
-   unsigned int num_dims, a_num_dims, b_num_dims;
-   int ai, bi;
-
-   /* The result of a inner_product will be either a float, double, or
-    * a complex number.
-    * 
-    * If an integer array is used, it will be promoted to a float.
-    */
-   
-   switch (SLang_peek_at_stack1 ())
-     {
-      case SLANG_DOUBLE_TYPE:
-	if (-1 == SLang_pop_array_of_type (&b, SLANG_DOUBLE_TYPE))
-	  return;
-	break;
-
-#if SLANG_HAS_COMPLEX
-      case SLANG_COMPLEX_TYPE:
-	if (-1 == SLang_pop_array_of_type (&b, SLANG_COMPLEX_TYPE))
-	  return;
-	break;
-#endif
-      case SLANG_FLOAT_TYPE:
-      default:
-	if (-1 == SLang_pop_array_of_type (&b, SLANG_FLOAT_TYPE))
-	  return;
-	break;
-     }
-
-   switch (SLang_peek_at_stack1 ())
-     {
-      case SLANG_DOUBLE_TYPE:
-	status = SLang_pop_array_of_type (&a, SLANG_DOUBLE_TYPE);
-	break;
-
-#if SLANG_HAS_COMPLEX
-      case SLANG_COMPLEX_TYPE:
-	status = SLang_pop_array_of_type (&a, SLANG_COMPLEX_TYPE);
-	break;
-#endif
-      case SLANG_FLOAT_TYPE:
-      default:
-	status = SLang_pop_array_of_type (&a, SLANG_FLOAT_TYPE);
-	break;
-     }
-   
-   if (status == -1)
-     {
-	SLang_free_array (b);
-	return;
-     }
-   
-   ai = -1;			       /* last index of a */
-   bi = 0;			       /* first index of b */
-   if ((-1 == get_inner_product_parms (a, &ai, &a_loops, &a_stride))
-       || (-1 == get_inner_product_parms (b, &bi, &b_loops, &b_inc)))
-     {
-	SLang_verror (SL_TYPE_MISMATCH, "Array dimensions are not compatible for inner-product");
-	goto free_and_return;
-     }
-       
-   a_num_dims = a->num_dims;
-   b_num_dims = b->num_dims;
-
-   /* Coerse a 1-d vector to 2-d */
-   if ((a_num_dims == 1) 
-       && (b_num_dims == 2)
-       && (a->num_elements))
-     {
-	a_num_dims = 2;
-	ai = 1;
-	a_loops = a->num_elements;
-	a_stride = 1;
-     }
-
-   if ((ai_dims = a->dims[ai]) != b->dims[bi])
-     {
-	SLang_verror (SL_TYPE_MISMATCH, "Array dimensions are not compatible for inner-product");
-	goto free_and_return;
-     }
-
-   num_dims = a_num_dims + b_num_dims - 2;
-   if (num_dims > SLARRAY_MAX_DIMS)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "Inner-product result exceed max allowed dimensions");
-	goto free_and_return;
-     }
-
-   if (num_dims)
-     {
-	j = 0;
-	for (i = 0; i < (int)a_num_dims; i++)
-	  if (i != ai) dims [j++] = a->dims[i];
-	for (i = 0; i < (int)b_num_dims; i++)
-	  if (i != bi) dims [j++] = b->dims[i];
-     }
-   else
-     {
-	/* a scalar */
-	num_dims = 1;
-	dims[0] = 1;
-     }
-
-   c_type = 0; fun = NULL;
-   switch (a->data_type)
-     {
-      case SLANG_FLOAT_TYPE:
-	switch (b->data_type)
-	  {
-	   case SLANG_FLOAT_TYPE:
-	     c_type = SLANG_FLOAT_TYPE;
-	     fun = innerprod_float_float;
-	     break;
-	   case SLANG_DOUBLE_TYPE:
-	     c_type = SLANG_DOUBLE_TYPE;
-	     fun = innerprod_float_double;
-	     break;
-#if SLANG_HAS_COMPLEX
-	   case SLANG_COMPLEX_TYPE:
-	     c_type = SLANG_COMPLEX_TYPE;
-	     fun = innerprod_float_complex;
-	     break;
-#endif
-	  }
-	break;
-      case SLANG_DOUBLE_TYPE:
-	switch (b->data_type)
-	  {
-	   case SLANG_FLOAT_TYPE:
-	     c_type = SLANG_DOUBLE_TYPE;
-	     fun = innerprod_double_float;
-	     break;
-	   case SLANG_DOUBLE_TYPE:
-	     c_type = SLANG_DOUBLE_TYPE;
-	     fun = innerprod_double_double;
-	     break;
-#if SLANG_HAS_COMPLEX
-	   case SLANG_COMPLEX_TYPE:
-	     c_type = SLANG_COMPLEX_TYPE;
-	     fun = innerprod_double_complex;
-	     break;
-#endif
-	  }
-	break;
-#if SLANG_HAS_COMPLEX
-      case SLANG_COMPLEX_TYPE:
-	c_type = SLANG_COMPLEX_TYPE;
-	switch (b->data_type)
-	  {
-	   case SLANG_FLOAT_TYPE:
-	     fun = innerprod_complex_float;
-	     break;
-	   case SLANG_DOUBLE_TYPE:
-	     fun = innerprod_complex_double;
-	     break;
-	   case SLANG_COMPLEX_TYPE:
-	     fun = innerprod_complex_complex;
-	     break;
-	  }
-	break;
-#endif
-      default:
-	break;
-     }
-
-   if (NULL == (c = SLang_create_array (c_type, 0, NULL, dims, num_dims)))
-     goto free_and_return;
-
-   (*fun)(a, b, c, a_loops, a_stride, b_loops, b_inc, ai_dims);
-
-   (void) SLang_push_array (c, 1);
-   /* drop */
-
-   free_and_return:
-   SLang_free_array (a);
-   SLang_free_array (b);
-}
-
-
-
-static SLang_Intrin_Fun_Type Array_Fun_Table [] =
-{
-   MAKE_INTRINSIC_1("transpose", array_transpose, SLANG_VOID_TYPE, SLANG_ARRAY_TYPE),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-int SLang_init_array (void)
-{
-   if (-1 == SLadd_intrin_fun_table (Array_Fun_Table, "__SLARRAY__"))
-     return -1;
-#if SLANG_HAS_FLOAT
-   _SLang_Matrix_Multiply = do_inner_product;
-#endif
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slarrfun.inc b/mdk-stage1/slang/slarrfun.inc
deleted file mode 100644
index 348473a6f..000000000
--- a/mdk-stage1/slang/slarrfun.inc
+++ /dev/null
@@ -1,257 +0,0 @@
-/* -*- mode: C -*- */
-
-/* Some "inline" functions for generic scalar types */
-
-#ifdef TRANSPOSE_2D_ARRAY
-static SLang_Array_Type *TRANSPOSE_2D_ARRAY (SLang_Array_Type *at, SLang_Array_Type *bt)
-{
-   GENERIC_TYPE *a_data, *b_data;
-   int nr, nc, i;
-
-   nr = at->dims[0];
-   nc = at->dims[1];
-
-   a_data = (GENERIC_TYPE *) at->data;
-   b_data = (GENERIC_TYPE *) bt->data;
-
-   for (i = 0; i < nr; i++)
-     {
-	GENERIC_TYPE *offset = b_data + i;
-	int j;
-	for (j = 0; j < nc; j++)
-	  {
-	     *offset = *a_data++;
-	     offset += nr;
-	  }
-     }
-   return bt;
-}
-#undef TRANSPOSE_2D_ARRAY
-#endif
-
-
-#ifdef INNERPROD_FUNCTION
-
-static void INNERPROD_FUNCTION
-  (SLang_Array_Type *at, SLang_Array_Type *bt, SLang_Array_Type *ct,
-   unsigned int a_loops, unsigned int a_stride,
-   unsigned int b_loops, unsigned int b_inc,
-   unsigned int inner_loops)
-{
-   GENERIC_TYPE_A *a;
-   GENERIC_TYPE_B *b;
-   GENERIC_TYPE_C *c;
-
-   c = (GENERIC_TYPE_C *) ct->data;
-   b = (GENERIC_TYPE_B *) bt->data;
-   a = (GENERIC_TYPE_A *) at->data;
-   
-   while (a_loops--)
-     {
-	GENERIC_TYPE_B *bb;
-	unsigned int j;
-
-	bb = b;
-
-	for (j = 0; j < inner_loops; j++)
-	  {
-	     double x = (double) a[j];
-
-	     if (x != 0.0)
-	       {
-		  unsigned int k;
-
-		  for (k = 0; k < b_loops; k++)
-		    c[k] += x * bb[k];
-	       }
-	     bb += b_inc;
-	  }
-	c += b_loops;
-	a += a_stride;
-     }
-}
-#undef INNERPROD_FUNCTION
-
-#undef GENERIC_TYPE_A
-#undef GENERIC_TYPE_B
-#undef GENERIC_TYPE_C
-#endif
-
-#ifdef INNERPROD_COMPLEX_A
-static void INNERPROD_COMPLEX_A
-  (SLang_Array_Type *at, SLang_Array_Type *bt, SLang_Array_Type *ct,
-   unsigned int a_loops, unsigned int a_stride,
-   unsigned int b_loops, unsigned int b_inc,
-   unsigned int inner_loops)
-{
-   double *a;
-   GENERIC_TYPE *b;
-   double *c;
-
-   c = (double *) ct->data;
-   b = (GENERIC_TYPE *) bt->data;
-   a = (double *) at->data;
-   
-   a_stride *= 2;
-
-   while (a_loops--)
-     {
-	GENERIC_TYPE *bb;
-	unsigned int bb_loops;
-
-	bb = b;
-	bb_loops = b_loops;
-	
-	while (bb_loops--)
-	  {
-	     double real_sum;
-	     double imag_sum;
-	     unsigned int iloops;
-	     double *aa;
-	     GENERIC_TYPE *bbb;
-	     
-	     aa = a;
-	     bbb = bb;
-	     iloops = inner_loops;
-
-	     real_sum = 0.0;
-	     imag_sum = 0.0;
-	     while (iloops--)
-	       {
-		  real_sum += aa[0] * (double)bbb[0];
-		  imag_sum += aa[1] * (double)bbb[0];
-		  aa += 2;
-		  bbb += b_inc;
-	       }
-
-	     *c++ = real_sum;
-	     *c++ = imag_sum;
-	     bb++;
-	  }
-
-	a += a_stride;
-     }
-}
-
-static void INNERPROD_A_COMPLEX
-  (SLang_Array_Type *at, SLang_Array_Type *bt, SLang_Array_Type *ct,
-   unsigned int a_loops, unsigned int a_stride,
-   unsigned int b_loops, unsigned int b_inc,
-   unsigned int inner_loops)
-{
-   GENERIC_TYPE *a;
-   double *b;
-   double *c;
-
-   c = (double *) ct->data;
-   b = (double *) bt->data;
-   a = (GENERIC_TYPE *) at->data;
-   
-   b_inc *= 2;
-
-   while (a_loops--)
-     {
-	double *bb;
-	unsigned int bb_loops;
-
-	bb = b;
-	bb_loops = b_loops;
-	
-	while (bb_loops--)
-	  {
-	     double real_sum;
-	     double imag_sum;
-	     unsigned int iloops;
-	     GENERIC_TYPE *aa;
-	     double *bbb;
-
-	     aa = a;
-	     bbb = bb;
-	     iloops = inner_loops;
-
-	     real_sum = 0.0;
-	     imag_sum = 0.0;
-	     while (iloops--)
-	       {
-		  real_sum += (double)aa[0] * bbb[0];
-		  imag_sum += (double)aa[0] * bbb[1];
-		  aa += 1;
-		  bbb += b_inc;
-	       }
-
-	     *c++ = real_sum;
-	     *c++ = imag_sum;
-	     bb += 2;
-	  }
-
-	a += a_stride;
-     }
-}
-
-#undef INNERPROD_A_COMPLEX
-#undef INNERPROD_COMPLEX_A
-#endif				       /* INNERPROD_COMPLEX_A */
-
-
-#ifdef INNERPROD_COMPLEX_COMPLEX
-static void INNERPROD_COMPLEX_COMPLEX
-  (SLang_Array_Type *at, SLang_Array_Type *bt, SLang_Array_Type *ct,
-   unsigned int a_loops, unsigned int a_stride,
-   unsigned int b_loops, unsigned int b_inc,
-   unsigned int inner_loops)
-{
-   double *a;
-   double *b;
-   double *c;
-
-   c = (double *) ct->data;
-   b = (double *) bt->data;
-   a = (double *) at->data;
-   
-   a_stride *= 2;
-   b_inc *= 2;
-
-   while (a_loops--)
-     {
-	double *bb;
-	unsigned int bb_loops;
-
-	bb = b;
-	bb_loops = b_loops;
-	
-	while (bb_loops--)
-	  {
-	     double real_sum;
-	     double imag_sum;
-	     unsigned int iloops;
-	     double *aa;
-	     double *bbb;
-
-	     aa = a;
-	     bbb = bb;
-	     iloops = inner_loops;
-
-	     real_sum = 0.0;
-	     imag_sum = 0.0;
-	     while (iloops--)
-	       {
-		  real_sum += aa[0]*bbb[0] - aa[1]*bbb[1];
-		  imag_sum += aa[0]*bbb[1] + aa[1]*bbb[0];
-		  aa += 2;
-		  bbb += b_inc;
-	       }
-
-	     *c++ = real_sum;
-	     *c++ = imag_sum;
-	     bb += 2;
-	  }
-
-	a += a_stride;
-     }
-}
-#undef INNERPROD_COMPLEX_COMPLEX
-#endif
-
-#ifdef GENERIC_TYPE
-# undef GENERIC_TYPE
-#endif
diff --git a/mdk-stage1/slang/slarrmis.c b/mdk-stage1/slang/slarrmis.c
deleted file mode 100644
index 330dcb53f..000000000
--- a/mdk-stage1/slang/slarrmis.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Misc Array Functions */
-/* Copyright (c) 1997, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-int SLang_get_array_element (SLang_Array_Type *at, int *indices, VOID_STAR data)
-{
-   int is_ptr;
-
-   if ((at == NULL)
-       || (indices == NULL)
-       || (data == NULL))
-     return -1;
-
-   is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
-   if (is_ptr) *(VOID_STAR *) data = NULL;
-   return _SLarray_aget_transfer_elem (at, indices, data, at->sizeof_type, is_ptr);
-}
-
-int SLang_set_array_element (SLang_Array_Type *at, int *indices, VOID_STAR data)
-{
-   if ((at == NULL)
-       || (indices == NULL)
-       || (data == NULL))
-     return -1;
-   
-   return _SLarray_aput_transfer_elem (at, indices, data, at->sizeof_type,
-				       at->flags & SLARR_DATA_VALUE_IS_POINTER);
-}
-
diff --git a/mdk-stage1/slang/slassoc.c b/mdk-stage1/slang/slassoc.c
deleted file mode 100644
index 5997458d2..000000000
--- a/mdk-stage1/slang/slassoc.c
+++ /dev/null
@@ -1,713 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#define SL_APP_WANTS_FOREACH
-#include "slang.h"
-#include "_slang.h"
-
-#define USE_NEW_ANYTYPE_CODE 1
-
-typedef struct _SLAssoc_Array_Element_Type
-{
-   char *key;		       /* slstring */
-   struct _SLAssoc_Array_Element_Type *next;
-   SLang_Object_Type value;
-}
-_SLAssoc_Array_Element_Type;
-
-typedef struct
-{
-   _SLAssoc_Array_Element_Type *elements[SLASSOC_HASH_TABLE_SIZE];
-   SLang_Object_Type default_value;
-   unsigned int num_elements;
-#define HAS_DEFAULT_VALUE	1
-   unsigned int flags;
-   unsigned char type;
-}
-SLang_Assoc_Array_Type;
-
-#define USE_CACHED_STRING	1
-
-#if USE_CACHED_STRING 
-static char *Cached_String;
-static SLang_Object_Type *Cached_Obj;
-static SLang_Assoc_Array_Type *Cached_Array;
-#endif
-
-static SLang_Assoc_Array_Type *alloc_assoc_array (unsigned char type, int has_default_value)
-{
-   SLang_Assoc_Array_Type *a;
-
-   a = (SLang_Assoc_Array_Type *)SLmalloc (sizeof (SLang_Assoc_Array_Type));
-   if (a == NULL)
-     {
-	if (has_default_value)
-	  SLdo_pop_n (1);
-	return NULL;
-     }
-
-   memset ((char *) a, 0, sizeof (SLang_Assoc_Array_Type));
-   a->type = type;
-
-   if (has_default_value)
-     {
-	if (
-#if USE_NEW_ANYTYPE_CODE
-	    ((type != SLANG_ANY_TYPE) && (-1 == SLclass_typecast (type, 1, 1)))
-#else
-	    (-1 == SLclass_typecast (type, 1, 1))
-#endif
-	    || (-1 == SLang_pop (&a->default_value)))
-	  {
-	     SLfree ((char *) a);
-	     return NULL;
-	  }
-
-	a->flags |= HAS_DEFAULT_VALUE;
-     }
-   return a;
-}
-
-static void free_element (_SLAssoc_Array_Element_Type *e)
-{
-   if (e == NULL)
-     return;
-
-   SLang_free_object (&e->value);
-   SLang_free_slstring (e->key);
-#if USE_CACHED_STRING
-   if (e->key == Cached_String)
-     Cached_String = NULL;
-#endif
-   SLfree ((char *)e);
-}
-
-static void delete_assoc_array (SLang_Assoc_Array_Type *a)
-{
-   unsigned int i;
-
-   if (a == NULL) return;
-
-   for (i = 0; i < SLASSOC_HASH_TABLE_SIZE; i++)
-     {
-	_SLAssoc_Array_Element_Type *e;
-
-	e = a->elements[i];
-	while (e != NULL)
-	  {
-	     _SLAssoc_Array_Element_Type *next_e;
-
-	     next_e = e->next;
-	     free_element (e);
-	     e = next_e;
-	  }
-     }
-   if (a->flags & HAS_DEFAULT_VALUE)
-     SLang_free_object (&a->default_value);
-
-   SLfree ((char *) a);
-}
-
-_INLINE_
-static SLang_Object_Type *
-find_element (SLang_Assoc_Array_Type *a, char *str, unsigned long hash)
-{
-   unsigned int h;
-   _SLAssoc_Array_Element_Type *e;
-
-   h = (unsigned int) (hash % SLASSOC_HASH_TABLE_SIZE);
-   e = a->elements[h];
-
-   while (e != NULL)
-     {
-	if (str == e->key)       /* slstrings can be compared this way */
-	  {
-#if USE_CACHED_STRING
-	     Cached_String = str;
-	     Cached_Obj = &e->value;
-	     Cached_Array = a;
-#endif
-	     return &e->value;
-	  }
-
-	e = e->next;
-     }
-
-   return NULL;
-}
-
-static _SLAssoc_Array_Element_Type *
-create_element (SLang_Assoc_Array_Type *a, char *str, unsigned long hash)
-{
-   unsigned int h;
-   _SLAssoc_Array_Element_Type *e;
-
-   e = (_SLAssoc_Array_Element_Type *) SLmalloc (sizeof (_SLAssoc_Array_Element_Type));
-   if (e == NULL)
-     return NULL;
-
-   memset ((char *) e, 0, sizeof (_SLAssoc_Array_Element_Type));
-   h = (unsigned int) (hash % SLASSOC_HASH_TABLE_SIZE);
-
-   if (NULL == (str = _SLstring_dup_hashed_string (str, hash)))
-     {
-	SLfree ((char *) e);
-	return NULL;
-     }
-
-   e->key = str;
-   e->next = a->elements[h];
-   a->elements[h] = e;
-
-   a->num_elements += 1;
-#if USE_CACHED_STRING
-   Cached_String = str;
-   Cached_Obj = &e->value;
-   Cached_Array = a;
-#endif
-   return e;
-}
-
-static int store_object (SLang_Assoc_Array_Type *a, char *s, SLang_Object_Type *obj)
-{
-   unsigned long hash;
-   SLang_Object_Type *v;
-
-#if USE_CACHED_STRING
-   if ((s == Cached_String) && (a == Cached_Array))
-     {
-	v = Cached_Obj;
-	SLang_free_object (v);
-     }
-   else
-     {
-#endif
-	hash = _SLcompute_string_hash (s);
-	if (NULL != (v = find_element (a, s, hash)))
-	  SLang_free_object (v);
-	else
-	  {
-	     _SLAssoc_Array_Element_Type *e;
-	     
-	     e = create_element (a, s, hash);
-	     if (e == NULL)
-	       return -1;
-	     
-	     v = &e->value;
-	  }
-#if USE_CACHED_STRING
-     }
-#endif
-
-   *v = *obj;
-
-   return 0;
-}
-
-static void assoc_destroy (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   delete_assoc_array ((SLang_Assoc_Array_Type *) ptr);
-}
-
-static int pop_index (unsigned int num_indices,
-		      SLang_MMT_Type **mmt,
-		      SLang_Assoc_Array_Type **a,
-		      char **str)
-{
-   if (NULL == (*mmt = SLang_pop_mmt (SLANG_ASSOC_TYPE)))
-     {
-	*a = NULL;
-	*str = NULL;
-	return -1;
-     }
-
-   if ((num_indices != 1)
-       || (-1 == SLang_pop_slstring (str)))
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "Assoc_Type arrays require a single string index");
-	SLang_free_mmt (*mmt);
-	*mmt = NULL;
-	*a = NULL;
-	*str = NULL;
-	return -1;
-     }
-
-   *a = (SLang_Assoc_Array_Type *) SLang_object_from_mmt (*mmt);
-   return 0;
-}
-
-static int assoc_aget (unsigned char type, unsigned int num_indices)
-{
-   SLang_MMT_Type *mmt;
-   char *str;
-   SLang_Assoc_Array_Type *a;
-   SLang_Object_Type *obj;
-   int ret;
-
-   (void) type;
-
-   if (-1 == pop_index (num_indices, &mmt, &a, &str))
-     return -1;
-
-#if USE_CACHED_STRING
-   if ((str == Cached_String) && (a == Cached_Array))
-     obj = Cached_Obj;
-   else
-#endif
-     obj = find_element (a, str, _SLcompute_string_hash (str));
-
-   if ((obj == NULL)
-       && (a->flags & HAS_DEFAULT_VALUE))
-     obj = &a->default_value;
-
-   if (obj == NULL)
-     {
-	SLang_verror (SL_INTRINSIC_ERROR,
-		      "No such element in Assoc Array: %s", str);
-	ret = -1;
-     }
-   else
-     {
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type[obj->data_type])
-	  ret = SLang_push (obj);
-#endif
-	else
-	  ret = _SLpush_slang_obj (obj);
-     }
-
-   SLang_free_slstring (str);
-   SLang_free_mmt (mmt);
-   return ret;
-}
-
-static int assoc_aput (unsigned char type, unsigned int num_indices)
-{
-   SLang_MMT_Type *mmt;
-   char *str;
-   SLang_Assoc_Array_Type *a;
-   SLang_Object_Type obj;
-   int ret;
-
-   (void) type;
-
-   if (-1 == pop_index (num_indices, &mmt, &a, &str))
-     return -1;
-
-   ret = -1;
-
-   if (0 == SLang_pop (&obj))
-     {
-	if ((obj.data_type != a->type)
-#if USE_NEW_ANYTYPE_CODE
-	    && (a->type != SLANG_ANY_TYPE)
-#endif
-	    )
-	  {
-	     (void) SLang_push (&obj);
-	     if ((-1 == SLclass_typecast (a->type, 1, 1))
-		 || (-1 == SLang_pop (&obj)))
-	       goto the_return;
-	  }
-	
-	if (-1 == store_object (a, str, &obj))
-	  SLang_free_object (&obj);
-	else
-	  ret = 0;
-     }
-
-   the_return:
-   SLang_free_slstring (str);
-   SLang_free_mmt (mmt);
-   return ret;
-}
-
-static int assoc_anew (unsigned char type, unsigned int num_dims)
-{
-   SLang_MMT_Type *mmt;
-   SLang_Assoc_Array_Type *a;
-   int has_default_value;
-
-   has_default_value = 0;
-   switch (num_dims)
-     {
-      case 0:
-	type = SLANG_ANY_TYPE;
-	break;
-      case 2:
-	(void) SLreverse_stack (2);
-	has_default_value = 1;
-	/* drop */
-      case 1:
-	if (0 == _SLang_pop_datatype (&type))
-	  break;
-	num_dims--;
-	/* drop */
-      default:
-	SLdo_pop_n (num_dims);
-	SLang_verror (SL_SYNTAX_ERROR, "Usage: Assoc_Type [DataType_Type]");
-	return -1;
-     }
-
-   a = alloc_assoc_array (type, has_default_value);
-   if (a == NULL)
-     return -1;
-
-   if (NULL == (mmt = SLang_create_mmt (SLANG_ASSOC_TYPE, (VOID_STAR) a)))
-     {
-	delete_assoc_array (a);
-	return -1;
-     }
-
-   if (-1 == SLang_push_mmt (mmt))
-     {
-	SLang_free_mmt (mmt);
-	return -1;
-     }
-
-   return 0;
-}
-
-static void assoc_get_keys (SLang_Assoc_Array_Type *a)
-{
-   SLang_Array_Type *at;
-   int num;
-   unsigned int i, j;
-   char **data;
-
-   /* Note: If support for threads is added, then we need to modify this
-    * algorithm to prevent another thread from modifying the array.
-    * However, that should be handled in inner_interp.
-    */
-   num = a->num_elements;
-
-   if (NULL == (at = SLang_create_array (SLANG_STRING_TYPE, 0, NULL, &num, 1)))
-     return;
-
-   data = (char **)at->data;
-
-   i = 0;
-   for (j = 0; j < SLASSOC_HASH_TABLE_SIZE; j++)
-     {
-	_SLAssoc_Array_Element_Type *e;
-
-	e = a->elements[j];
-	while (e != NULL)
-	  {
-	     /* Next cannot fail because it is an slstring */
-	     data [i] = SLang_create_slstring (e->key);
-	     e = e->next;
-	     i++;
-	  }
-     }
-   (void) SLang_push_array (at, 1);
-}
-
-static int
-transfer_element (SLang_Class_Type *cl, VOID_STAR dest_data,
-		  SLang_Object_Type *obj)
-{
-   unsigned int sizeof_type;
-   VOID_STAR src_data;
-
-#if USE_NEW_ANYTYPE_CODE
-   if (cl->cl_data_type == SLANG_ANY_TYPE)
-     {
-	SLang_Any_Type *any;
-
-	if ((-1 == _SLpush_slang_obj (obj))
-	    || (-1 == SLang_pop_anytype (&any)))
-	  return -1;
-	
-	*(SLang_Any_Type **)dest_data = any;
-	return 0;
-     }
-#endif
-   /* Optimize for scalar */
-   if (cl->cl_class_type == SLANG_CLASS_TYPE_SCALAR)
-     {
-	sizeof_type = cl->cl_sizeof_type;
-	memcpy ((char *) dest_data, (char *)&obj->v, sizeof_type);
-	return 0;
-     }
-
-   src_data = _SLclass_get_ptr_to_value (cl, obj);
-
-   if (-1 == (*cl->cl_acopy) (cl->cl_data_type, src_data, dest_data))
-     return -1;
-
-   return 0;
-}
-
-static void assoc_get_values (SLang_Assoc_Array_Type *a)
-{
-   SLang_Array_Type *at;
-   int num;
-   unsigned int i, j;
-   char *dest_data;
-   unsigned char type;
-   SLang_Class_Type *cl;
-   unsigned int sizeof_type;
-
-   /* Note: If support for threads is added, then we need to modify this
-    * algorithm to prevent another thread from modifying the array.
-    * However, that should be handled in inner_interp.
-    */
-   num = a->num_elements;
-   type = a->type;
-
-   cl = _SLclass_get_class (type);
-   sizeof_type = cl->cl_sizeof_type;
-
-   if (NULL == (at = SLang_create_array (type, 0, NULL, &num, 1)))
-     return;
-
-   dest_data = (char *)at->data;
-
-   i = 0;
-   for (j = 0; j < SLASSOC_HASH_TABLE_SIZE; j++)
-     {
-	_SLAssoc_Array_Element_Type *e;
-
-	e = a->elements[j];
-	while (e != NULL)
-	  {
-	     if (-1 == transfer_element (cl, (VOID_STAR) dest_data, &e->value))
-	       {
-		  SLang_free_array (at);
-		  return;
-	       }
-
-	     dest_data += sizeof_type;
-	     e = e->next;
-	     i++;
-	  }
-     }
-   (void) SLang_push_array (at, 1);
-}
-
-static int assoc_key_exists (SLang_Assoc_Array_Type *a, char *key)
-{
-   return (NULL != find_element (a, key, _SLcompute_string_hash (key)));
-}
-
-static void assoc_delete_key (SLang_Assoc_Array_Type *a, char *key)
-{
-   unsigned int h;
-   _SLAssoc_Array_Element_Type *v, *v0;
-
-   h = (unsigned int) (_SLcompute_string_hash (key) % SLASSOC_HASH_TABLE_SIZE);
-
-   v0 = NULL;
-   v = a->elements[h];
-   while (v != NULL)
-     {
-	if (v->key == key)
-	  {
-	     if (v0 != NULL)
-	       v0->next = v->next;
-	     else
-	       a->elements[h] = v->next;
-
-	     free_element (v);
-	     a->num_elements -= 1;
-	     return;
-	  }
-	v0 = v;
-	v = v->next;
-     }
-
-   /* No such element.  Let it pass with no error. */
-}
-
-#define A SLANG_ASSOC_TYPE
-#define S SLANG_STRING_TYPE
-static SLang_Intrin_Fun_Type Assoc_Table [] =
-{
-   MAKE_INTRINSIC_1("assoc_get_keys", assoc_get_keys, SLANG_VOID_TYPE, A),
-   MAKE_INTRINSIC_1("assoc_get_values", assoc_get_values, SLANG_VOID_TYPE, A),
-   MAKE_INTRINSIC_2("assoc_key_exists", assoc_key_exists, SLANG_INT_TYPE, A, S),
-   MAKE_INTRINSIC_2("assoc_delete_key", assoc_delete_key, SLANG_VOID_TYPE, A, S),
-
-   SLANG_END_INTRIN_FUN_TABLE
-};
-#undef A
-#undef S
-
-static int assoc_length (unsigned char type, VOID_STAR v, unsigned int *len)
-{
-   SLang_Assoc_Array_Type *a;
-
-   (void) type;
-   a = (SLang_Assoc_Array_Type *) SLang_object_from_mmt (*(SLang_MMT_Type **)v);
-   *len = a->num_elements;
-   return 0;
-}
-
-struct _SLang_Foreach_Context_Type
-{
-   SLang_MMT_Type *mmt;
-   SLang_Assoc_Array_Type *a;
-   unsigned int this_hash_index;
-   unsigned int next_same_hash_index;
-#define CTX_WRITE_KEYS		1
-#define CTX_WRITE_VALUES	2
-   unsigned char flags;
-};
-
-static SLang_Foreach_Context_Type *
-cl_foreach_open (unsigned char type, unsigned int num)
-{
-   SLang_Foreach_Context_Type *c;
-   unsigned char flags;
-   SLang_MMT_Type *mmt;
-
-   (void) type;
-
-   if (NULL == (mmt = SLang_pop_mmt (SLANG_ASSOC_TYPE)))
-     return NULL;
-
-   flags = 0;
-
-   while (num--)
-     {
-	char *s;
-
-	if (-1 == SLang_pop_slstring (&s))
-	  {
-	     SLang_free_mmt (mmt);
-	     return NULL;
-	  }
-
-	if (0 == strcmp (s, "keys"))
-	  flags |= CTX_WRITE_KEYS;
-	else if (0 == strcmp (s, "values"))
-	  flags |= CTX_WRITE_VALUES;
-	else
-	  {
-	     SLang_verror (SL_NOT_IMPLEMENTED,
-			   "using '%s' not supported by SLassoc_Type",
-			   s);
-	     SLang_free_slstring (s);
-	     SLang_free_mmt (mmt);
-	     return NULL;
-	  }
-
-	SLang_free_slstring (s);
-     }
-
-   if (NULL == (c = (SLang_Foreach_Context_Type *) SLmalloc (sizeof (SLang_Foreach_Context_Type))))
-     {
-	SLang_free_mmt (mmt);
-	return NULL;
-     }
-
-   memset ((char *) c, 0, sizeof (SLang_Foreach_Context_Type));
-
-   if (flags == 0) flags = CTX_WRITE_VALUES|CTX_WRITE_KEYS;
-
-   c->flags = flags;
-   c->mmt = mmt;
-   c->a = (SLang_Assoc_Array_Type *) SLang_object_from_mmt (mmt);
-
-   return c;
-}
-
-static void cl_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   (void) type;
-   if (c == NULL) return;
-   SLang_free_mmt (c->mmt);
-   SLfree ((char *) c);
-}
-
-static int cl_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   SLang_Assoc_Array_Type *a;
-   _SLAssoc_Array_Element_Type *e;
-   unsigned int i, j;
-
-   (void) type;
-
-   if (c == NULL)
-     return -1;
-
-   a = c->a;
-
-   i = c->this_hash_index;
-   if (i >= SLASSOC_HASH_TABLE_SIZE)
-     return 0;
-
-   e = a->elements[i];
-
-   j = c->next_same_hash_index;
-   c->next_same_hash_index = j + 1;
-
-   while ((j > 0) && (e != NULL))
-     {
-	j--;
-	e = e->next;
-     }
-
-   if (e == NULL)
-     {
-	do
-	  {
-	     i++;
-	     if (i >= SLASSOC_HASH_TABLE_SIZE)
-	       return 0;		       /* no more */
-	  }
-	while (a->elements [i] == NULL);
-
-	e = a->elements[i];
-	c->this_hash_index = i;
-	c->next_same_hash_index = 1;
-     }
-
-   if ((c->flags & CTX_WRITE_KEYS)
-       && (-1 == SLang_push_string (e->key)))
-     return -1;
-
-   if ((c->flags & CTX_WRITE_VALUES)
-       && (-1 == _SLpush_slang_obj (&e->value)))
-     return -1;
-
-   /* keep going */
-   return 1;
-}
-
-int SLang_init_slassoc (void)
-{
-   SLang_Class_Type *cl;
-
-   if (SLclass_is_class_defined (SLANG_ASSOC_TYPE))
-     return 0;
-
-   if (NULL == (cl = SLclass_allocate_class ("Assoc_Type")))
-     return -1;
-
-   (void) SLclass_set_destroy_function (cl, assoc_destroy);
-   (void) SLclass_set_aput_function (cl, assoc_aput);
-   (void) SLclass_set_aget_function (cl, assoc_aget);
-   (void) SLclass_set_anew_function (cl, assoc_anew);
-   cl->cl_length = assoc_length;
-   cl->cl_foreach_open = cl_foreach_open;
-   cl->cl_foreach_close = cl_foreach_close;
-   cl->cl_foreach = cl_foreach;
-
-   if (-1 == SLclass_register_class (cl, SLANG_ASSOC_TYPE, sizeof (SLang_Assoc_Array_Type), SLANG_CLASS_TYPE_MMT))
-     return -1;
-
-   if (-1 == SLadd_intrin_fun_table (Assoc_Table, "__SLASSOC__"))
-     return -1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slbstr.c b/mdk-stage1/slang/slbstr.c
deleted file mode 100644
index b4b8c4c51..000000000
--- a/mdk-stage1/slang/slbstr.c
+++ /dev/null
@@ -1,615 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-struct _SLang_BString_Type
-{
-   unsigned int num_refs;
-   unsigned int len;
-   int ptr_type;
-#define IS_SLSTRING		1
-#define IS_MALLOCED		2
-#define IS_NOT_TO_BE_FREED	3
-   union
-     {
-	unsigned char bytes[1];
-	unsigned char *ptr;
-     }
-   v;
-};
-
-#define BS_GET_POINTER(b) ((b)->ptr_type ? (b)->v.ptr : (b)->v.bytes)
-
-static SLang_BString_Type *create_bstring_of_type (char *bytes, unsigned int len, int type)
-{
-   SLang_BString_Type *b;
-   unsigned int size;
-
-   size = sizeof(SLang_BString_Type);
-   if (type == 0)
-     size += len;
-
-   if (NULL == (b = (SLang_BString_Type *)SLmalloc (size)))
-     return NULL;
-
-   b->len = len;
-   b->num_refs = 1;
-   b->ptr_type = type;
-
-   switch (type)
-     {
-      case 0:
-	if (bytes != NULL) memcpy ((char *) b->v.bytes, bytes, len);
-	/* Now \0 terminate it because we want to also use it as a C string
-	 * whenever possible.  Note that sizeof(SLang_BString_Type) includes
-	 * space for 1 character and we allocated len extra bytes.  Thus, it is
-	 * ok to add a \0 to the end.
-	 */
-	b->v.bytes[len] = 0;
-	break;
-
-      case IS_SLSTRING:
-	if (NULL == (b->v.ptr = (unsigned char *)SLang_create_nslstring (bytes, len)))
-	  {
-	     SLfree ((char *) b);
-	     return NULL;
-	  }
-	break;
-
-      case IS_MALLOCED:
-      case IS_NOT_TO_BE_FREED:
-	b->v.ptr = (unsigned char *)bytes;
-	bytes [len] = 0;	       /* NULL terminate */
-	break;
-     }
-
-   return b;
-}
-
-SLang_BString_Type *
-SLbstring_create (unsigned char *bytes, unsigned int len)
-{
-   return create_bstring_of_type ((char *)bytes, len, 0);
-}
-
-/* Note that ptr must be len + 1 bytes long for \0 termination */
-SLang_BString_Type *
-SLbstring_create_malloced (unsigned char *ptr, unsigned int len, int free_on_error)
-{
-   SLang_BString_Type *b;
-
-   if (ptr == NULL)
-     return NULL;
-
-   if (NULL == (b = create_bstring_of_type ((char *)ptr, len, IS_MALLOCED)))
-     {
-	if (free_on_error)
-	  SLfree ((char *) ptr);
-     }
-   return b;
-}
-
-SLang_BString_Type *SLbstring_create_slstring (char *s)
-{
-   if (s == NULL)
-     return NULL;
-
-   return create_bstring_of_type (s, strlen (s), IS_SLSTRING);
-}
-
-SLang_BString_Type *SLbstring_dup (SLang_BString_Type *b)
-{
-   if (b != NULL)
-     b->num_refs += 1;
-
-   return b;
-}
-
-unsigned char *SLbstring_get_pointer (SLang_BString_Type *b, unsigned int *len)
-{
-   if (b == NULL)
-     {
-	*len = 0;
-	return NULL;
-     }
-   *len = b->len;
-   return BS_GET_POINTER(b);
-}
-
-void SLbstring_free (SLang_BString_Type *b)
-{
-   if (b == NULL)
-     return;
-
-   if (b->num_refs > 1)
-     {
-	b->num_refs -= 1;
-	return;
-     }
-
-   switch (b->ptr_type)
-     {
-      case 0:
-      case IS_NOT_TO_BE_FREED:
-      default:
-	break;
-
-      case IS_SLSTRING:
-	SLang_free_slstring ((char *)b->v.ptr);
-	break;
-
-      case IS_MALLOCED:
-	SLfree ((char *)b->v.ptr);
-	break;
-     }
-
-   SLfree ((char *) b);
-}
-
-int SLang_pop_bstring (SLang_BString_Type **b)
-{
-   return SLclass_pop_ptr_obj (SLANG_BSTRING_TYPE, (VOID_STAR *)b);
-}
-
-int SLang_push_bstring (SLang_BString_Type *b)
-{
-   if (b == NULL)
-     return SLang_push_null ();
-
-   b->num_refs += 1;
-
-   if (0 == SLclass_push_ptr_obj (SLANG_BSTRING_TYPE, (VOID_STAR)b))
-     return 0;
-
-   b->num_refs -= 1;
-   return -1;
-}
-
-static int
-bstring_bstring_bin_op_result (int op, unsigned char a, unsigned char b,
-			       unsigned char *c)
-{
-   (void) a;
-   (void) b;
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUS:
-	*c = SLANG_BSTRING_TYPE;
-	break;
-
-      case SLANG_GT:
-      case SLANG_GE:
-      case SLANG_LT:
-      case SLANG_LE:
-      case SLANG_EQ:
-      case SLANG_NE:
-	*c = SLANG_CHAR_TYPE;
-	break;
-     }
-   return 1;
-}
-
-static int compare_bstrings (SLang_BString_Type *a, SLang_BString_Type *b)
-{
-   unsigned int len;
-   int ret;
-
-   len = a->len;
-   if (b->len < len) len = b->len;
-
-   ret = memcmp ((char *)BS_GET_POINTER(b), (char *)BS_GET_POINTER(a), len);
-   if (ret != 0)
-     return ret;
-
-   if (a->len > b->len)
-     return 1;
-   if (a->len == b->len)
-     return 0;
-
-   return -1;
-}
-
-static SLang_BString_Type *
-concat_bstrings (SLang_BString_Type *a, SLang_BString_Type *b)
-{
-   unsigned int len;
-   SLang_BString_Type *c;
-   char *bytes;
-
-   len = a->len + b->len;
-
-   if (NULL == (c = SLbstring_create (NULL, len)))
-     return NULL;
-
-   bytes = (char *)BS_GET_POINTER(c);
-
-   memcpy (bytes, (char *)BS_GET_POINTER(a), a->len);
-   memcpy (bytes + a->len, (char *)BS_GET_POINTER(b), b->len);
-
-   return c;
-}
-
-static void free_n_bstrings (SLang_BString_Type **a, unsigned int n)
-{
-   unsigned int i;
-
-   if (a == NULL) return;
-
-   for (i = 0; i < n; i++)
-     {
-	SLbstring_free (a[i]);
-	a[i] = NULL;
-     }
-}
-
-static int
-bstring_bstring_bin_op (int op,
-			unsigned char a_type, VOID_STAR ap, unsigned int na,
-			unsigned char b_type, VOID_STAR bp, unsigned int nb,
-			VOID_STAR cp)
-{
-   char *ic;
-   SLang_BString_Type **a, **b, **c;
-   unsigned int n, n_max;
-   unsigned int da, db;
-
-   (void) a_type;
-   (void) b_type;
-
-   if (na == 1) da = 0; else da = 1;
-   if (nb == 1) db = 0; else db = 1;
-
-   if (na > nb) n_max = na; else n_max = nb;
-
-   a = (SLang_BString_Type **) ap;
-   b = (SLang_BString_Type **) bp;
-   for (n = 0; n < n_max; n++)
-     {
-	if ((*a == NULL) || (*b == NULL))
-	  {
-	     SLang_verror (SL_VARIABLE_UNINITIALIZED,
-			   "Binary string element[%u] not initialized for binary operation", n);
-	     return -1;
-	  }
-	a += da; b += db;
-     }
-
-   a = (SLang_BString_Type **) ap;
-   b = (SLang_BString_Type **) bp;
-   ic = (char *) cp;
-   c = NULL;
-
-   switch (op)
-     {
-       case SLANG_PLUS:
-	/* Concat */
-	c = (SLang_BString_Type **) cp;
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (NULL == (c[n] = concat_bstrings (*a, *b)))
-	       goto return_error;
-
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_NE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (0 != compare_bstrings (*a, *b));
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_GT:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (compare_bstrings (*a, *b) > 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_GE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (compare_bstrings (*a, *b) >= 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_LT:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (compare_bstrings (*a, *b) < 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_LE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (compare_bstrings (*a, *b) <= 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_EQ:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (compare_bstrings (*a, *b) == 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-     }
-   return 1;
-
-   return_error:
-   if (c != NULL)
-     {
-	free_n_bstrings (c, n);
-	while (n < n_max)
-	  {
-	     c[n] = NULL;
-	     n++;
-	  }
-     }
-   return -1;
-}
-
-/* If preserve_ptr, then use a[i] as the bstring data.  See how this function
- * is called by the binary op routines for why.
- */
-static SLang_BString_Type **
-make_n_bstrings (SLang_BString_Type **b, char **a, unsigned int n, int ptr_type)
-{
-   unsigned int i;
-   int malloc_flag;
-
-   malloc_flag = 0;
-   if (b == NULL)
-     {
-	b = (SLang_BString_Type **) SLmalloc ((n + 1) * sizeof (SLang_BString_Type *));
-	if (b == NULL)
-	  return NULL;
-	malloc_flag = 1;
-     }
-
-   for (i = 0; i < n; i++)
-     {
-	char *s = a[i];
-
-	if (s == NULL)
-	  {
-	     b[i] = NULL;
-	     continue;
-	  }
-
-	if (NULL == (b[i] = create_bstring_of_type (s, strlen(s), ptr_type)))
-	  {
-	     free_n_bstrings (b, i);
-	     if (malloc_flag) SLfree ((char *) b);
-	     return NULL;
-	  }
-     }
-
-   return b;
-}
-
-static int
-bstring_string_bin_op (int op,
-		       unsigned char a_type, VOID_STAR ap, unsigned int na,
-		       unsigned char b_type, VOID_STAR bp, unsigned int nb,
-		       VOID_STAR cp)
-{
-   SLang_BString_Type **b;
-   int ret;
-
-   if (NULL == (b = make_n_bstrings (NULL, (char **)bp, nb, IS_NOT_TO_BE_FREED)))
-     return -1;
-
-   b_type = SLANG_BSTRING_TYPE;
-   ret = bstring_bstring_bin_op (op,
-				 a_type, ap, na,
-				 b_type, (VOID_STAR) b, nb,
-				 cp);
-   free_n_bstrings (b, nb);
-   SLfree ((char *) b);
-   return ret;
-}
-
-static int
-string_bstring_bin_op (int op,
-		       unsigned char a_type, VOID_STAR ap, unsigned int na,
-		       unsigned char b_type, VOID_STAR bp, unsigned int nb,
-		       VOID_STAR cp)
-{
-   SLang_BString_Type **a;
-   int ret;
-
-   if (NULL == (a = make_n_bstrings (NULL, (char **)ap, na, IS_NOT_TO_BE_FREED)))
-     return -1;
-
-   a_type = SLANG_BSTRING_TYPE;
-   ret = bstring_bstring_bin_op (op,
-				 a_type, (VOID_STAR) a, na,
-				 b_type, bp, nb,
-				 cp);
-   free_n_bstrings (a, na);
-   SLfree ((char *) a);
-
-   return ret;
-}
-
-static void bstring_destroy (unsigned char unused, VOID_STAR s)
-{
-   (void) unused;
-   SLbstring_free (*(SLang_BString_Type **) s);
-}
-
-static int bstring_push (unsigned char unused, VOID_STAR sptr)
-{
-   (void) unused;
-
-   return SLang_push_bstring (*(SLang_BString_Type **) sptr);
-}
-
-static int string_to_bstring (unsigned char a_type, VOID_STAR ap, unsigned int na,
-			      unsigned char b_type, VOID_STAR bp)
-{
-   char **s;
-   SLang_BString_Type **b;
-
-   (void) a_type;
-   (void) b_type;
-
-   s = (char **) ap;
-   b = (SLang_BString_Type **) bp;
-
-   if (NULL == make_n_bstrings (b, s, na, IS_SLSTRING))
-     return -1;
-
-   return 1;
-}
-
-static int bstring_to_string (unsigned char a_type, VOID_STAR ap, unsigned int na,
-			      unsigned char b_type, VOID_STAR bp)
-{
-   char **s;
-   unsigned int i;
-   SLang_BString_Type **a;
-
-   (void) a_type;
-   (void) b_type;
-
-   s = (char **) bp;
-   a = (SLang_BString_Type **) ap;
-
-   for (i = 0; i < na; i++)
-     {
-	SLang_BString_Type *ai = a[i];
-
-	if (ai == NULL)
-	  {
-	     s[i] = NULL;
-	     continue;
-	  }
-
-	if (NULL == (s[i] = SLang_create_slstring ((char *)BS_GET_POINTER(ai))))
-	  {
-	     while (i != 0)
-	       {
-		  i--;
-		  SLang_free_slstring (s[i]);
-		  s[i] = NULL;
-	       }
-	     return -1;
-	  }
-     }
-
-   return 1;
-}
-
-static char *bstring_string (unsigned char type, VOID_STAR v)
-{
-   SLang_BString_Type *s;
-   unsigned char buf[128];
-   unsigned char *bytes, *bytes_max;
-   unsigned char *b, *bmax;
-
-   (void) type;
-
-   s = *(SLang_BString_Type **) v;
-   bytes = BS_GET_POINTER(s);
-   bytes_max = bytes + s->len;
-
-   b = buf;
-   bmax = buf + (sizeof (buf) - 4);
-
-   while (bytes < bytes_max)
-     {
-	unsigned char ch = *bytes;
-
-	if ((ch < 32) || (ch >= 127) || (ch == '\\'))
-	  {
-	     if (b + 4 > bmax)
-	       break;
-
-	     sprintf ((char *) b, "\\%03o", ch);
-	     b += 4;
-	  }
-	else
-	  {
-	     if (b == bmax)
-	       break;
-
-	     *b++ = ch;
-	  }
-
-	bytes++;
-     }
-
-   if (bytes < bytes_max)
-     {
-	*b++ = '.';
-	*b++ = '.';
-	*b++ = '.';
-     }
-   *b = 0;
-
-   return SLmake_string ((char *)buf);
-}
-
-static unsigned int bstrlen_cmd (SLang_BString_Type *b)
-{
-   return b->len;
-}
-
-static SLang_Intrin_Fun_Type BString_Table [] = /*{{{*/
-{
-   MAKE_INTRINSIC_1("bstrlen",  bstrlen_cmd, SLANG_UINT_TYPE, SLANG_BSTRING_TYPE),
-   MAKE_INTRINSIC_0("pack", _SLpack, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_2("unpack", _SLunpack, SLANG_VOID_TYPE, SLANG_STRING_TYPE, SLANG_BSTRING_TYPE),
-   MAKE_INTRINSIC_1("pad_pack_format", _SLpack_pad_format, SLANG_VOID_TYPE, SLANG_STRING_TYPE),
-   MAKE_INTRINSIC_1("sizeof_pack", _SLpack_compute_size, SLANG_UINT_TYPE, SLANG_STRING_TYPE),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-int _SLang_init_bstring (void)
-{
-   SLang_Class_Type *cl;
-
-   if (NULL == (cl = SLclass_allocate_class ("BString_Type")))
-     return -1;
-   (void) SLclass_set_destroy_function (cl, bstring_destroy);
-   (void) SLclass_set_push_function (cl, bstring_push);
-   (void) SLclass_set_string_function (cl, bstring_string);
-
-   if (-1 == SLclass_register_class (cl, SLANG_BSTRING_TYPE, sizeof (char *),
-				     SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   if ((-1 == SLclass_add_typecast (SLANG_BSTRING_TYPE, SLANG_STRING_TYPE, bstring_to_string, 1))
-       || (-1 == SLclass_add_typecast (SLANG_STRING_TYPE, SLANG_BSTRING_TYPE, string_to_bstring, 1))
-       || (-1 == SLclass_add_binary_op (SLANG_BSTRING_TYPE, SLANG_BSTRING_TYPE, bstring_bstring_bin_op, bstring_bstring_bin_op_result))
-       || (-1 == SLclass_add_binary_op (SLANG_STRING_TYPE, SLANG_BSTRING_TYPE, string_bstring_bin_op, bstring_bstring_bin_op_result))
-       || (-1 == SLclass_add_binary_op (SLANG_BSTRING_TYPE, SLANG_STRING_TYPE, bstring_string_bin_op, bstring_bstring_bin_op_result)))
-
-     return -1;
-
-   if (-1 == SLadd_intrin_fun_table (BString_Table, NULL))
-     return -1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slclass.c b/mdk-stage1/slang/slclass.c
deleted file mode 100644
index 733888cb8..000000000
--- a/mdk-stage1/slang/slclass.c
+++ /dev/null
@@ -1,1391 +0,0 @@
-/* User defined objects */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-unsigned char _SLclass_Class_Type [256];
-#endif
-
-static SLang_Class_Type *Registered_Types[256];
-SLang_Class_Type *_SLclass_get_class (unsigned char type)
-{
-   SLang_Class_Type *cl;
-
-   cl = Registered_Types [type];
-   if (cl == NULL)
-     SLang_exit_error ("Application error: Type %d not registered", (int) type);
-
-   return cl;
-}
-
-int SLclass_is_class_defined (unsigned char type)
-{
-   return (NULL != Registered_Types[type]);
-}
-
-VOID_STAR _SLclass_get_ptr_to_value (SLang_Class_Type *cl,
-				     SLang_Object_Type *obj)
-{
-   VOID_STAR p;
-
-   switch (cl->cl_class_type)
-     {
-      case SLANG_CLASS_TYPE_MMT:
-      case SLANG_CLASS_TYPE_PTR:
-      case SLANG_CLASS_TYPE_SCALAR:
-	p = (VOID_STAR) &obj->v;
-	break;
-
-      case SLANG_CLASS_TYPE_VECTOR:
-	p = obj->v.ptr_val;
-	break;
-
-      default:
-	p = NULL;
-     }
-   return p;
-}
-
-char *SLclass_get_datatype_name (unsigned char stype)
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (stype);
-   return cl->cl_name;
-}
-
-static int method_undefined_error (unsigned char type, char *method, char *name)
-{
-   if (name == NULL) name = SLclass_get_datatype_name (type);
-
-   SLang_verror (SL_TYPE_MISMATCH, "%s method not defined for %s",
-		 method, name);
-   return -1;
-}
-
-static int
-scalar_vector_bin_op_result (int op, unsigned char a, unsigned char b,
-			     unsigned char *c)
-{
-   (void) a; (void) b;
-   switch (op)
-     {
-      case SLANG_NE:
-      case SLANG_EQ:
-	*c = SLANG_INT_TYPE;
-	return 1;
-     }
-   return 0;
-}
-
-static int
-scalar_vector_bin_op (int op,
-		      unsigned char a_type, VOID_STAR ap, unsigned int na,
-		      unsigned char b_type, VOID_STAR bp, unsigned int nb,
-		      VOID_STAR cp)
-{
-   int *c;
-   char *a, *b;
-   unsigned int da, db;
-   unsigned int n, n_max;
-   unsigned int data_type_len;
-   SLang_Class_Type *cl;
-
-   (void) b_type;
-   cl = _SLclass_get_class (a_type);
-
-   data_type_len = cl->cl_sizeof_type;
-
-   a = (char *) ap;
-   b = (char *) bp;
-   c = (int *) cp;
-
-   if (na == 1) da = 0; else da = data_type_len;
-   if (nb == 1) db = 0; else db = data_type_len;
-   if (na > nb) n_max = na; else n_max = nb;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_NE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (0 != SLMEMCMP(a, b, data_type_len));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_EQ:
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (0 == SLMEMCMP(a, b, data_type_len));
-	     a += da; b += db;
-	  }
-	break;
-     }
-   return 1;
-}
-
-static int scalar_fread (unsigned char type, FILE *fp, VOID_STAR ptr,
-			 unsigned int desired, unsigned int *actual)
-{
-   unsigned int n;
-
-   n = fread ((char *) ptr, _SLclass_get_class (type)->cl_sizeof_type,
-	      desired, fp);
-   *actual = n;
-   return 0;
-}
-
-static int scalar_fwrite (unsigned char type, FILE *fp, VOID_STAR ptr,
-			  unsigned int desired, unsigned int *actual)
-{
-   unsigned int n;
-
-   n = fwrite ((char *) ptr, _SLclass_get_class (type)->cl_sizeof_type,
-	       desired, fp);
-   *actual = n;
-   return 0;
-}
-
-static int vector_apush (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   return (*cl->cl_push)(type, (VOID_STAR) &ptr);
-}
-
-static int vector_apop (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   return (*cl->cl_pop)(type, (VOID_STAR) &ptr);
-}
-
-static int default_push_mmt (unsigned char type_unused, VOID_STAR ptr)
-{
-   SLang_MMT_Type *ref;
-
-   (void) type_unused;
-   ref = *(SLang_MMT_Type **) ptr;
-   return SLang_push_mmt (ref);
-}
-
-static void default_destroy_simple (unsigned char type_unused, VOID_STAR ptr_unused)
-{
-   (void) type_unused;
-   (void) ptr_unused;
-}
-
-static void default_destroy_user (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   SLang_free_mmt (*(SLang_MMT_Type **) ptr);
-}
-
-static int default_pop (unsigned char type, VOID_STAR ptr)
-{
-   return SLclass_pop_ptr_obj (type, (VOID_STAR *) ptr);
-}
-
-static int default_datatype_deref (unsigned char type)
-{
-   return method_undefined_error (type, "datatype_deref", NULL);
-}
-
-static int default_acopy (unsigned char type, VOID_STAR from, VOID_STAR to)
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   if (-1 == (*cl->cl_apush) (type, from))
-     return -1;
-   return (*cl->cl_apop) (type, to);
-}
-
-static int default_dereference_object (unsigned char type, VOID_STAR ptr)
-{
-   (void) ptr;
-   return method_undefined_error (type, "dereference", NULL);
-}
-
-static char *default_string (unsigned char stype, VOID_STAR v)
-{
-   char buf [256];
-   char *s;
-#if SLANG_HAS_COMPLEX
-   double *cplx;
-#endif
-   s = buf;
-
-   switch (stype)
-     {
-      case SLANG_STRING_TYPE:
-	s = *(char **) v;
-	break;
-
-      case SLANG_NULL_TYPE:
-	s = "NULL";
-	break;
-
-      case SLANG_DATATYPE_TYPE:
-	s = SLclass_get_datatype_name ((unsigned char) *(int *)v);
-	break;
-
-#if SLANG_HAS_COMPLEX
-      case SLANG_COMPLEX_TYPE:
-	cplx = *(double **) v;
-	if (cplx[1] < 0)
-	  sprintf (s, "(%g - %gi)", cplx [0], -cplx [1]);
-	else
-	  sprintf (s, "(%g + %gi)", cplx [0], cplx [1]);
-	break;
-#endif
-      default:
-	s = SLclass_get_datatype_name (stype);
-     }
-
-   return SLmake_string (s);
-}
-
-static int
-use_cmp_bin_op_result (int op, unsigned char a, unsigned char b,
-		       unsigned char *c)
-{
-   if (a != b)
-     return 0;
-   switch (op)
-     {
-      case SLANG_NE:
-      case SLANG_EQ:
-      case SLANG_LT:
-      case SLANG_LE:
-      case SLANG_GT:
-      case SLANG_GE:
-	*c = SLANG_INT_TYPE;
-	return 1;
-     }
-   return 0;
-}
-
-static int
-use_cmp_bin_op (int op,
-		unsigned char a_type, VOID_STAR ap, unsigned int na,
-		unsigned char b_type, VOID_STAR bp, unsigned int nb,
-		VOID_STAR cp)
-{
-   int *c;
-   char *a, *b;
-   unsigned int da, db;
-   unsigned int n, n_max;
-   unsigned int data_type_len;
-   SLang_Class_Type *cl;
-   int (*cmp)(unsigned char, VOID_STAR, VOID_STAR, int *);
-
-   (void) b_type;
-   cl = _SLclass_get_class (a_type);
-   cmp = cl->cl_cmp;
-   data_type_len = cl->cl_sizeof_type;
-
-   a = (char *) ap;
-   b = (char *) bp;
-   c = (int *) cp;
-
-   if (na == 1) da = 0; else da = data_type_len;
-   if (nb == 1) db = 0; else db = data_type_len;
-   if (na > nb) n_max = na; else n_max = nb;
-
-   switch (op)
-     {
-	int result;
-	
-      default:
-	return 0;
-
-      case SLANG_NE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
-	       return -1;
-	     c[n] = (result != 0);
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_EQ:
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
-	       return -1;
-	     c[n] = (result == 0);
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_GT:
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
-	       return -1;
-	     c[n] = (result > 0);
-	     a += da; b += db;
-	  }
-	break;
-      case SLANG_GE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
-	       return -1;
-	     c[n] = (result >= 0);
-	     a += da; b += db;
-	  }
-	break;
-      case SLANG_LT:
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
-	       return -1;
-	     c[n] = (result < 0);
-	     a += da; b += db;
-	  }
-	break;
-      case SLANG_LE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
-	       return -1;
-	     c[n] = (result <= 0);
-	     a += da; b += db;
-	  }
-	break;
-     }
-   return 1;
-}
-
-
-int SLclass_get_class_id (SLang_Class_Type *cl)
-{
-   if (cl == NULL)
-     return -1;
-   return (int) cl->cl_data_type;
-}
-
-SLang_Class_Type *SLclass_allocate_class (char *name)
-{
-   SLang_Class_Type *cl;
-   unsigned int i;
-
-   for (i = 0; i < 256; i++)
-     {
-	cl = Registered_Types [i];
-	if ((cl != NULL)
-	    && (0 == strcmp (cl->cl_name, name)))
-	  {
-	     SLang_verror (SL_DUPLICATE_DEFINITION, "Type name %s already exists", name);
-	     return NULL;
-	  }
-     }
-
-   cl = (SLang_Class_Type *) SLmalloc (sizeof (SLang_Class_Type));
-   if (cl == NULL) return NULL;
-
-   SLMEMSET ((char *) cl, 0, sizeof (SLang_Class_Type));
-
-   if (NULL == (cl->cl_name = SLang_create_slstring (name)))
-     {
-	SLfree ((char *) cl);
-	return NULL;
-     }
-
-   return cl;
-}
-
-static int DataType_Ids [256];
-
-int _SLang_push_datatype (unsigned char data_type)
-{
-   /* This data type could be a copy of another type, e.g., short and
-    * int if they are the same size (Int16 == Short).  So, make sure
-    * we push the original and not the copy. 
-    */
-   data_type = _SLclass_get_class (data_type)->cl_data_type;
-   return SLclass_push_int_obj (SLANG_DATATYPE_TYPE, (int) data_type);
-}
-
-static int datatype_deref (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Class_Type *cl;
-   int status;
-
-   /* The parser generated code for this as if a function call were to be
-    * made.  However, we are calling the deref object routine
-    * instead of the function call.  So, I must simulate the function call.
-    */
-   if (-1 == _SL_increment_frame_pointer ())
-     return -1;
-
-   type = (unsigned char) *(int *) ptr;
-   cl = _SLclass_get_class (type);
-   status = (*cl->cl_datatype_deref) (type);
-
-   (void) _SL_decrement_frame_pointer ();
-   return status;
-}
-
-static int datatype_push (unsigned char type_unused, VOID_STAR ptr)
-{
-   (void) type_unused;
-   return _SLang_push_datatype (*(int *) ptr);
-}
-
-int _SLang_pop_datatype (unsigned char *type)
-{
-   int i;
-
-   if (-1 == SLclass_pop_int_obj (SLANG_DATATYPE_TYPE, &i))
-     return -1;
-
-   *type = (unsigned char) i;
-   return 0;
-}
-
-static int datatype_pop (unsigned char type, VOID_STAR ptr)
-{
-   if (-1 == _SLang_pop_datatype (&type))
-     return -1;
-
-   *(int *) ptr = type;
-   return 0;
-}
-
-int _SLclass_init (void)
-{
-   SLang_Class_Type *cl;
-
-   /* First initialize the container classes.  This is so binary operations
-    * added later will work with them.
-    */
-   if (-1 == _SLarray_init_slarray ())
-     return -1;
-
-   /* DataType_Type */
-   if (NULL == (cl = SLclass_allocate_class ("DataType_Type")))
-     return -1;
-   cl->cl_pop = datatype_pop;
-   cl->cl_push = datatype_push;
-   cl->cl_dereference = datatype_deref;
-   if (-1 == SLclass_register_class (cl, SLANG_DATATYPE_TYPE, sizeof(int),
-				     SLANG_CLASS_TYPE_SCALAR))
-     return -1;
-
-   return 0;
-}
-
-static int register_new_datatype (char *name, unsigned char type)
-{
-   DataType_Ids [type] = type;
-   return SLadd_intrinsic_variable (name, (VOID_STAR) (DataType_Ids + type),
-				    SLANG_DATATYPE_TYPE, 1);
-}
-
-int SLclass_create_synonym (char *name, unsigned char type)
-{
-   if (NULL == _SLclass_get_class (type))
-     return -1;
-
-   return register_new_datatype (name, type);
-}
-
-int _SLclass_copy_class (unsigned char to, unsigned char from)
-{
-   SLang_Class_Type *cl = _SLclass_get_class (from);
-
-   if (Registered_Types[to] != NULL)
-     SLang_exit_error ("Application error: Class already exists");
-
-   Registered_Types[to] = cl;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (to != SLANG_UNDEFINED_TYPE)
-     _SLclass_Class_Type [to] = cl->cl_class_type;
-#endif
-   return 0;
-}
-
-int SLclass_register_class (SLang_Class_Type *cl, unsigned char type, unsigned int type_size, unsigned char class_type)
-{
-   char *name;
-   unsigned int i;
-   int can_binop = 1;		       /* scalar_vector_bin_op should work
-					* for all data types.
-					*/
-
-   if (type == SLANG_VOID_TYPE) for (i = 0; i < 256; i++)
-     {
-	if ((Registered_Types[i] == NULL)
-	    && (i != SLANG_VOID_TYPE))
-	  {
-	     type = (unsigned char) i;
-	     break;
-	  }
-     }
-
-   if ((NULL != Registered_Types [type])
-       || (type == SLANG_VOID_TYPE))
-     {
-	SLang_verror (SL_APPLICATION_ERROR, "Class type %d already in use", (int) type);
-	return -1;
-     }
-
-   cl->cl_data_type = type;
-   cl->cl_class_type = class_type;
-   name = cl->cl_name;
-
-   switch (class_type)
-     {
-      case SLANG_CLASS_TYPE_MMT:
-	if (cl->cl_push == NULL) cl->cl_push = default_push_mmt;
-	if (cl->cl_destroy == NULL)
-	  return method_undefined_error (type, "destroy", name);
-	cl->cl_user_destroy_fun = cl->cl_destroy;
-	cl->cl_destroy = default_destroy_user;
-	type_size = sizeof (VOID_STAR);
-	break;
-
-      case SLANG_CLASS_TYPE_SCALAR:
-	if (cl->cl_destroy == NULL) cl->cl_destroy = default_destroy_simple;
-	if ((type_size == 0)
-	    || (type_size > sizeof (_SL_Object_Union_Type)))
-	  {
-	     SLang_verror (SL_INVALID_PARM,
-			   "Type size for %s not appropriate for SCALAR type",
-			   name);
-	     return -1;
-	  }
-	if (cl->cl_pop == NULL)
-	  return method_undefined_error (type, "pop", name);
-	if (cl->cl_fread == NULL) cl->cl_fread = scalar_fread;
-	if (cl->cl_fwrite == NULL) cl->cl_fwrite = scalar_fwrite;
-
-	can_binop = 1;
-	break;
-
-      case SLANG_CLASS_TYPE_PTR:
-	if (cl->cl_destroy == NULL)
-	  return method_undefined_error (type, "destroy", name);
-	type_size = sizeof (VOID_STAR);
-	break;
-
-      case SLANG_CLASS_TYPE_VECTOR:
-	if (cl->cl_destroy == NULL)
-	  return method_undefined_error (type, "destroy", name);
-	if (cl->cl_pop == NULL)
-	  return method_undefined_error (type, "pop", name);
-	cl->cl_apop = vector_apop;
-	cl->cl_apush = vector_apush;
-	cl->cl_adestroy = default_destroy_simple;
-	if (cl->cl_fread == NULL) cl->cl_fread = scalar_fread;
-	if (cl->cl_fwrite == NULL) cl->cl_fwrite = scalar_fwrite;
-	can_binop = 1;
-	break;
-
-      default:
-	SLang_verror (SL_INVALID_PARM, "%s: unknown class type (%d)", name, class_type);
-	return -1;
-     }
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (type != SLANG_UNDEFINED_TYPE)
-     _SLclass_Class_Type [type] = class_type;
-#endif
-
-   if (type_size == 0)
-     {
-	SLang_verror (SL_INVALID_PARM, "type size must be non-zero for %s", name);
-	return -1;
-     }
-
-   if (cl->cl_string == NULL) cl->cl_string = default_string;
-   if (cl->cl_acopy == NULL) cl->cl_acopy = default_acopy;
-   if (cl->cl_datatype_deref == NULL) cl->cl_datatype_deref = default_datatype_deref;
-
-   if (cl->cl_pop == NULL) cl->cl_pop = default_pop;
-
-   if (cl->cl_push == NULL)
-     return method_undefined_error (type, "push", name);
-
-   if (cl->cl_byte_code_destroy == NULL)
-     cl->cl_byte_code_destroy = cl->cl_destroy;
-   if (cl->cl_push_literal == NULL)
-     cl->cl_push_literal = cl->cl_push;
-
-   if (cl->cl_dereference == NULL)
-     cl->cl_dereference = default_dereference_object;
-
-   if (cl->cl_apop == NULL) cl->cl_apop = cl->cl_pop;
-   if (cl->cl_apush == NULL) cl->cl_apush = cl->cl_push;
-   if (cl->cl_adestroy == NULL) cl->cl_adestroy = cl->cl_destroy;
-   if (cl->cl_push_intrinsic == NULL) cl->cl_push_intrinsic = cl->cl_push;
-
-   if ((cl->cl_foreach == NULL)
-       || (cl->cl_foreach_open == NULL)
-       || (cl->cl_foreach_close == NULL))
-     {
-	cl->cl_foreach = _SLarray_cl_foreach;
-	cl->cl_foreach_open = _SLarray_cl_foreach_open;
-	cl->cl_foreach_close = _SLarray_cl_foreach_close;
-     }
-
-   cl->cl_sizeof_type = type_size;
-
-   if (NULL == (cl->cl_transfer_buf = (VOID_STAR) SLmalloc (type_size)))
-     return -1;
-
-   Registered_Types[type] = cl;
-
-   if (-1 == register_new_datatype (name, type))
-     return -1;
-
-   if (cl->cl_cmp != NULL)
-     {
-	if (-1 == SLclass_add_binary_op (type, type, use_cmp_bin_op, use_cmp_bin_op_result))
-	  return -1;
-     }
-   else if (can_binop
-	    && (-1 == SLclass_add_binary_op (type, type, scalar_vector_bin_op, scalar_vector_bin_op_result)))
-     return -1;
-
-   cl->cl_anytype_typecast = _SLanytype_typecast;
-
-   return 0;
-}
-
-int SLclass_add_math_op (unsigned char type,
-			 int (*handler)(int,
-					unsigned char, VOID_STAR, unsigned int,
-					VOID_STAR),
-			 int (*result) (int, unsigned char, unsigned char *))
-{
-   SLang_Class_Type *cl = _SLclass_get_class (type);
-
-   cl->cl_math_op = handler;
-   cl->cl_math_op_result_type = result;
-   return 0;
-}
-
-int SLclass_add_binary_op (unsigned char a, unsigned char b,
-			   int (*f) (int,
-				     unsigned char, VOID_STAR, unsigned int,
-				     unsigned char, VOID_STAR, unsigned int,
-				     VOID_STAR),
-			   int (*r) (int, unsigned char, unsigned char, unsigned char *))
-{
-   SLang_Class_Type *cl;
-   SL_OOBinary_Type *ab;
-
-   if ((f == NULL) || (r == NULL))
-     {
-	SLang_verror (SL_INVALID_PARM, "SLclass_add_binary_op");
-	return -1;
-     }
-
-   cl = _SLclass_get_class (a);
-   (void) _SLclass_get_class (b);
-
-   if (NULL == (ab = (SL_OOBinary_Type *) SLmalloc (sizeof(SL_OOBinary_Type))))
-     return -1;
-
-   ab->data_type = b;
-   ab->binary_function = f;
-   ab->binary_result = r;
-   ab->next = cl->cl_binary_ops;
-   cl->cl_binary_ops = ab;
-
-   if ((a != SLANG_ARRAY_TYPE)
-       && (b != SLANG_ARRAY_TYPE))
-     {
-	if ((-1 == _SLarray_add_bin_op (a))
-	    || (-1 == _SLarray_add_bin_op (b)))
-	  return -1;
-     }
-
-   return 0;
-}
-
-int SLclass_add_unary_op (unsigned char type,
-			  int (*f)(int,
-				   unsigned char, VOID_STAR, unsigned int,
-				   VOID_STAR),
-			  int (*r)(int, unsigned char, unsigned char *))
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   if ((f == NULL) || (r == NULL))
-     {
-	SLang_verror (SL_INVALID_PARM, "SLclass_add_unary_op");
-	return -1;
-     }
-
-   cl->cl_unary_op = f;
-   cl->cl_unary_op_result_type = r;
-
-   return 0;
-}
-
-int SLclass_add_app_unary_op (unsigned char type,
-			      int (*f)(int,
-				       unsigned char, VOID_STAR, unsigned int,
-				       VOID_STAR),
-			      int (*r)(int, unsigned char, unsigned char *))
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   if ((f == NULL) || (r == NULL))
-     {
-	SLang_verror (SL_INVALID_PARM, "SLclass_add_app_unary_op");
-	return -1;
-     }
-
-   cl->cl_app_unary_op = f;
-   cl->cl_app_unary_op_result_type = r;
-
-   return 0;
-}
-
-int SLclass_set_pop_function (SLang_Class_Type *cl, int (*f)(unsigned char, VOID_STAR))
-{
-   if (cl == NULL) return -1;
-   cl->cl_pop = f;
-
-   return 0;
-}
-
-int SLclass_set_push_function (SLang_Class_Type *cl, int (*f)(unsigned char, VOID_STAR))
-{
-   if (cl == NULL) return -1;
-   cl->cl_push = f;
-
-   return 0;
-}
-
-int SLclass_set_string_function (SLang_Class_Type *cl, char *(*f)(unsigned char, VOID_STAR))
-{
-   if (cl == NULL) return -1;
-
-   cl->cl_string = f;
-   return 0;
-}
-
-int SLclass_set_destroy_function (SLang_Class_Type *cl, void (*f)(unsigned char, VOID_STAR))
-{
-   if (cl == NULL) return -1;
-
-   cl->cl_destroy = f;
-   return 0;
-}
-
-int SLclass_set_sget_function (SLang_Class_Type *cl, int (*f)(unsigned char, char *))
-{
-   if (cl == NULL) return -1;
-   cl->cl_sget = f;
-   return 0;
-}
-
-int SLclass_set_sput_function (SLang_Class_Type *cl, int (*f)(unsigned char, char *))
-{
-   if (cl == NULL) return -1;
-   cl->cl_sput = f;
-   return 0;
-}
-
-int SLclass_set_aget_function (SLang_Class_Type *cl, int (*f)(unsigned char, unsigned int))
-{
-   if (cl == NULL) return -1;
-   cl->cl_aget = f;
-   return 0;
-}
-
-int SLclass_set_aput_function (SLang_Class_Type *cl, int (*f)(unsigned char, unsigned int))
-{
-   if (cl == NULL) return -1;
-   cl->cl_aput = f;
-   return 0;
-}
-
-int SLclass_set_anew_function (SLang_Class_Type *cl, int (*f)(unsigned char, unsigned int))
-{
-   if (cl == NULL) return -1;
-   cl->cl_anew = f;
-   return 0;
-}
-
-/* Misc */
-void _SLclass_type_mismatch_error (unsigned char a, unsigned char b)
-{
-   SLang_verror (SL_TYPE_MISMATCH, "Expecting %s, found %s",
-		 SLclass_get_datatype_name (a),
-		 SLclass_get_datatype_name (b));
-}
-
-/* */
-
-static int null_binary_fun (int op,
-			    unsigned char a, VOID_STAR ap, unsigned int na,
-			    unsigned char b, VOID_STAR bp, unsigned int nb,
-			    VOID_STAR cp)
-{
-   int *ic;
-   unsigned int i;
-   int c;
-
-   (void) ap; (void) bp;
-
-   switch (op)
-     {
-      case SLANG_EQ:
-	c = (a == b);
-	break;
-
-      case SLANG_NE:
-	c = (a != b);
-	break;
-
-      default:
-	return 0;
-     }
-
-   if (na > nb) nb = na;
-   ic = (int *) cp;
-   for (i = 0; i < nb; i++)
-     ic[i] = c;
-
-   return 1;
-}
-
-static char *get_binary_op_string (int op)
-{
-   static char *ops[SLANG_MOD] =
-     {
-	"+", "=", "*", "/", "==", "!=", ">", ">=", "<", "<=", "^",
-	"or", "and", "&", "|", "xor", "shl", "shr", "mod"
-     };
-
-   if ((op > SLANG_MOD) || (op <= 0))
-     return "??";
-   return ops[op - 1];
-}
-
-int (*_SLclass_get_binary_fun (int op,
-			       SLang_Class_Type *a_cl, SLang_Class_Type *b_cl,
-			       SLang_Class_Type **c_cl, int do_error))
-(int,
- unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR)
-{
-   SL_OOBinary_Type *bt;
-   unsigned char a, b, c;
-
-   a = a_cl->cl_data_type;
-   b = b_cl->cl_data_type;
-
-   if ((a == SLANG_NULL_TYPE) || (b == SLANG_NULL_TYPE))
-     {
-	*c_cl = _SLclass_get_class (SLANG_INT_TYPE);
-	return null_binary_fun;
-     }
-
-   bt = a_cl->cl_binary_ops;
-
-   while (bt != NULL)
-     {
-	if (bt->data_type == b)
-	  {
-	     if (1 != (*bt->binary_result)(op, a, b, &c))
-	       break;
-
-	     if (c == a) *c_cl = a_cl;
-	     else if (c == b) *c_cl = b_cl;
-	     else *c_cl = _SLclass_get_class (c);
-
-	     return bt->binary_function;
-	  }
-
-	bt = bt->next;
-     }
-
-   if (do_error)
-     SLang_verror (SL_TYPE_MISMATCH, "%s %s %s is not possible",
-		   a_cl->cl_name, get_binary_op_string (op), b_cl->cl_name);
-
-   *c_cl = NULL;
-   return NULL;
-}
-
-int (*_SLclass_get_unary_fun (int op,
-			      SLang_Class_Type *a_cl,
-			      SLang_Class_Type **b_cl,
-			      int utype))
-(int, unsigned char, VOID_STAR, unsigned int, VOID_STAR)
-{
-   int (*f)(int, unsigned char, VOID_STAR, unsigned int, VOID_STAR);
-   int (*r)(int, unsigned char, unsigned char *);
-   unsigned char a;
-   unsigned char b;
-
-   switch (utype)
-     {
-      case _SLANG_BC_UNARY:
-	f = a_cl->cl_unary_op;
-	r = a_cl->cl_unary_op_result_type;
-	break;
-
-      case _SLANG_BC_MATH_UNARY:
-	f = a_cl->cl_math_op;
-	r = a_cl->cl_math_op_result_type;
-	break;
-
-      case _SLANG_BC_APP_UNARY:
-	f = a_cl->cl_app_unary_op;
-	r = a_cl->cl_app_unary_op_result_type;
-	break;
-
-      default:
-	f = NULL;
-	r = NULL;
-     }
-
-   a = a_cl->cl_data_type;
-   if ((f != NULL) && (r != NULL) && (1 == (*r) (op, a, &b)))
-     {
-	if (a == b)
-	  *b_cl = a_cl;
-	else
-	  *b_cl = _SLclass_get_class (b);
-	return f;
-     }
-
-   SLang_verror (SL_TYPE_MISMATCH, "undefined unary operation/function on %s",
-		 a_cl->cl_name);
-
-   *b_cl = NULL;
-
-   return NULL;
-}
-
-int
-SLclass_typecast (unsigned char to_type, int is_implicit, int allow_array)
-{
-   unsigned char from_type;
-   SLang_Class_Type *cl_to, *cl_from;
-   SLang_Object_Type obj;
-   VOID_STAR ap;
-   VOID_STAR bp;
-   int status;
-
-   if (-1 == SLang_pop (&obj))
-     return -1;
-
-   from_type = obj.data_type;
-   if (from_type == to_type)
-     {
-	SLang_push (&obj);
-	return 0;
-     }
-
-   cl_from = _SLclass_get_class (from_type);
-   
-   /* Since the typecast functions are designed to work on arrays, 
-    * get the pointer to the value instead of just &obj.v.
-    */
-   ap = _SLclass_get_ptr_to_value (cl_from, &obj);
-
-   if ((from_type == SLANG_ARRAY_TYPE)
-       && (allow_array || (to_type != SLANG_ANY_TYPE)))
-     {
-	if (allow_array == 0)
-	  goto return_error;
-
-	cl_to = _SLclass_get_class (SLANG_ARRAY_TYPE);
-	bp = cl_to->cl_transfer_buf;
-	status = _SLarray_typecast (from_type, ap, 1, to_type, bp, is_implicit);
-     }
-   else
-     {
-	int (*t) (unsigned char, VOID_STAR, unsigned int, unsigned char, VOID_STAR);
-
-	if (NULL == (t = _SLclass_get_typecast (from_type, to_type, is_implicit)))
-	  {
-	     SLang_free_object (&obj);
-	     return -1;
-	  }
-
-	cl_to = _SLclass_get_class (to_type);
-	bp = cl_to->cl_transfer_buf;
-	status = (*t) (from_type, ap, 1, to_type, bp);
-     }
-
-   if (1 == status)
-     {
-	if (-1 == (*cl_to->cl_apush)(to_type, bp))
-	  {
-	     (*cl_to->cl_adestroy) (to_type, bp);
-	     SLang_free_object (&obj);
-	     return -1;
-	  }
-
-	/* cl_apush will push a copy, so destry this one */
-	(*cl_to->cl_adestroy) (to_type, bp);
-	SLang_free_object (&obj);
-	return 0;
-     }
-
-   return_error:
-
-   SLang_verror (SL_TYPE_MISMATCH, "Unable to typecast %s to %s",
-		 cl_from->cl_name,
-		 SLclass_get_datatype_name (to_type));
-   SLang_free_object (&obj);
-   return -1;
-}
-
-int (*_SLclass_get_typecast (unsigned char from, unsigned char to, int is_implicit))
-(unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR)
-{
-   SL_Typecast_Type *t;
-   SLang_Class_Type *cl_from;
-
-   cl_from = _SLclass_get_class (from);
-
-   t = cl_from->cl_typecast_funs;
-   while (t != NULL)
-     {
-	if (t->data_type != to)
-	  {
-	     t = t->next;
-	     continue;
-	  }
-
-	if (is_implicit && (t->allow_implicit == 0))
-	  break;
-
-	return t->typecast;
-     }
-
-   if (to == SLANG_ANY_TYPE)
-     return _SLanytype_typecast;
-
-   if ((is_implicit == 0)
-       && (cl_from->cl_void_typecast != NULL))
-     return cl_from->cl_void_typecast;
-
-   SLang_verror (SL_TYPE_MISMATCH, "Unable to typecast %s to %s",
-		 cl_from->cl_name,
-		 SLclass_get_datatype_name (to));
-
-   return NULL;
-}
-
-int
-SLclass_add_typecast (unsigned char from, unsigned char to,
-		      int (*f)_PROTO((unsigned char, VOID_STAR, unsigned int,
-				      unsigned char, VOID_STAR)),
-		      int allow_implicit)
-{
-   SL_Typecast_Type *t;
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (from);
-   if (to == SLANG_VOID_TYPE)
-     {
-	cl->cl_void_typecast = f;
-	return 0;
-     }
-
-   (void) _SLclass_get_class (to);
-
-   if (NULL == (t = (SL_Typecast_Type *) SLmalloc (sizeof (SL_Typecast_Type))))
-     return -1;
-
-   SLMEMSET((char *) t, 0, sizeof(SL_Typecast_Type));
-   t->data_type = to;
-   t->next = cl->cl_typecast_funs;
-   t->typecast = f;
-   t->allow_implicit = allow_implicit;
-
-   cl->cl_typecast_funs = t;
-
-   return 0;
-}
-
-SLang_MMT_Type *SLang_pop_mmt (unsigned char type) /*{{{*/
-{
-   SLang_MMT_Type *mmt;
-
-   if (-1 == SLclass_pop_ptr_obj (type, (VOID_STAR *) &mmt))
-     mmt = NULL;
-   return mmt;
-
-#if 0
-   SLang_Object_Type obj;
-   SLang_Class_Type *cl;
-
-   if (_SLang_pop_object_of_type (type, &obj))
-     return NULL;
-
-   cl = _SLclass_get_class (type);
-   if ((cl->cl_class_type == SLANG_CLASS_TYPE_MMT)
-       && (obj.data_type == type))
-     {
-	return obj.v.ref;
-     }
-
-   _SLclass_type_mismatch_error (type, obj.data_type);
-   SLang_free_object (&obj);
-   return NULL;
-#endif
-}
-
-/*}}}*/
-
-int SLang_push_mmt (SLang_MMT_Type *ref) /*{{{*/
-{
-   if (ref == NULL)
-     return SLang_push_null ();
-
-   ref->count += 1;
-
-   if (0 == SLclass_push_ptr_obj (ref->data_type, (VOID_STAR) ref))
-     return 0;
-
-   ref->count -= 1;
-   return -1;
-}
-
-/*}}}*/
-
-void SLang_inc_mmt (SLang_MMT_Type *ref)
-{
-   if (ref != NULL)
-     ref->count += 1;
-}
-
-VOID_STAR SLang_object_from_mmt (SLang_MMT_Type *ref)
-{
-   if (ref == NULL)
-     return NULL;
-
-   return ref->user_data;
-}
-
-SLang_MMT_Type *SLang_create_mmt (unsigned char t, VOID_STAR p)
-{
-   SLang_MMT_Type *ref;
-
-   (void) _SLclass_get_class (t);      /* check to see if it is registered */
-
-   if (NULL == (ref = (SLang_MMT_Type *) SLmalloc (sizeof (SLang_MMT_Type))))
-     return NULL;
-
-   SLMEMSET ((char *) ref, 0, sizeof (SLang_MMT_Type));
-
-   ref->data_type = t;
-   ref->user_data = p;
-   /* FIXME!!  To be consistent with other types, the reference count should 
-    * be set to 1 here.  However, doing so will require other code changes
-    * involving the use of MMTs.  For instance, SLang_free_mmt would have
-    * to be called after every push of the MMT.
-    */
-   return ref;
-}
-
-void SLang_free_mmt (SLang_MMT_Type *ref)
-{
-   unsigned char type;
-   SLang_Class_Type *cl;
-
-   if (ref == NULL)
-     return;
-
-   /* This can be zero if SLang_create_mmt is called followed
-    * by this routine before anything gets a chance to attach itself
-    * to it.
-    */
-   if (ref->count > 1)
-     {
-	ref->count -= 1;
-	return;
-     }
-
-   type = ref->data_type;
-   cl = _SLclass_get_class (type);
-   (*cl->cl_user_destroy_fun) (type, ref->user_data);
-   SLfree ((char *)ref);
-}
-
-int SLang_push_value (unsigned char type, VOID_STAR v)
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   return (*cl->cl_apush)(type, v);
-}
-
-int SLang_pop_value (unsigned char type, VOID_STAR v)
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   return (*cl->cl_apop)(type, v);
-}
-
-void SLang_free_value (unsigned char type, VOID_STAR v)
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   (*cl->cl_adestroy) (type, v);
-}
-
-/* These routines are very low-level and are designed for application data
- * types to access the stack from their push/pop methods.  The int and
- * pointer versions are in slang.c
- */
-#if SLANG_HAS_FLOAT
-int SLclass_push_double_obj (unsigned char type, double x)
-{
-   SLang_Object_Type obj;
-   obj.data_type = type;
-   obj.v.double_val = x;
-   return SLang_push (&obj);
-}
-int SLclass_push_float_obj (unsigned char type, float x)
-{
-   SLang_Object_Type obj;
-   obj.data_type = type;
-   obj.v.float_val = x;
-   return SLang_push (&obj);
-}
-
-#endif
-
-int SLclass_push_long_obj (unsigned char type, long x)
-{
-   SLang_Object_Type obj;
-   obj.data_type = type;
-   obj.v.long_val = x;
-   return SLang_push (&obj);
-}
-
-int SLclass_push_short_obj (unsigned char type, short x)
-{
-   SLang_Object_Type obj;
-   obj.data_type = type;
-   obj.v.short_val = x;
-   return SLang_push (&obj);
-}
-
-int SLclass_push_char_obj (unsigned char type, char x)
-{
-   SLang_Object_Type obj;
-   obj.data_type = type;
-   obj.v.char_val = x;
-   return SLang_push (&obj);
-}
-
-#if SLANG_HAS_FLOAT
-int SLclass_pop_double_obj (unsigned char type, double *x)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
-     return -1;
-
-   *x = obj.v.double_val;
-   return 0;
-}
-
-int SLclass_pop_float_obj (unsigned char type, float *x)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
-     return -1;
-
-   *x = obj.v.float_val;
-   return 0;
-}
-#endif
-
-int SLclass_pop_long_obj (unsigned char type, long *x)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
-     return -1;
-
-   *x = obj.v.long_val;
-   return 0;
-}
-
-int SLclass_pop_int_obj (unsigned char type, int *x)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
-     return -1;
-
-   *x = obj.v.int_val;
-   return 0;
-}
-
-int SLclass_pop_short_obj (unsigned char type, short *x)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
-     return -1;
-
-   *x = obj.v.short_val;
-   return 0;
-}
-
-int SLclass_pop_char_obj (unsigned char type, char *x)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
-     return -1;
-
-   *x = obj.v.char_val;
-   return 0;
-}
-
-int SLclass_pop_ptr_obj (unsigned char type, VOID_STAR *s)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
-     {
-	*s = (VOID_STAR) NULL;
-	return -1;
-     }
-   *s = obj.v.ptr_val;
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slcmd.c b/mdk-stage1/slang/slcmd.c
deleted file mode 100644
index 4a00a90fc..000000000
--- a/mdk-stage1/slang/slcmd.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/* cmd line facility for slang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#if SLANG_HAS_FLOAT
-# include <math.h>
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifndef HAVE_STDLIB_H
-/* Oh dear.  Where is the prototype for atof?  If not in stdlib, then
- * I do not know where.  Not in math.h onsome systems either.
- */
-extern double atof ();
-#endif
-
-static SLcmd_Cmd_Type *SLcmd_find_command (char *s, SLcmd_Cmd_Type *cmd)
-{
-   char *cmdstr;
-   char chs = *s++, ch;
-
-   while ((cmd->cmdfun != NULL)
-	  && (NULL != (cmdstr = cmd->cmd))
-	  && (0 != (ch = *cmdstr++)))
-     {
-	if ((ch == chs) && !strcmp (s, cmdstr)) return cmd;
-	cmd++;
-     }
-   return NULL;
-}
-
-static int extract_token (char **strptr, char *buf)
-{
-   char *s, *b;
-   char ch, quote;
-
-   *buf = 0;
-
-   s = *strptr;
-   while (((ch = *s) != 0)
-	  && ((ch == ' ') || (ch == '\t') || (ch == '\n')))
-     s++;
-
-   *strptr = s;
-
-   if (ch == 0) return 0;
-   if (ch == '%') return 0;
-
-   b = buf;
-
-   *b++ = ch;
-   s++;
-
-   if ((ch == '\'') || (ch == '"'))
-     {
-	quote = ch;
-	while ((ch = *s) != 0)
-	  {
-	     s++;
-	     *b++ = ch;
-	     if (ch == quote)
-	       break;
-
-	     if (ch == '\\')
-	       {
-		  if (0 == (ch = *s))
-		    break;
-		  *b++ = ch;
-		  s++;
-	       }
-	  }
-	*strptr = s;
-	*b = 0;
-	return 1;
-     }
-
-   while (((ch = *s) != 0)
-	  && (ch != ' ')
-	  && (ch != '\t')
-	  && (ch != '\n')
-	  && (ch != '%'))
-     *b++ = *s++;
-
-   *strptr = s;
-   *b = 0;
-   return 1;
-}
-
-static int allocate_arg_space (SLcmd_Cmd_Table_Type *table, int argc, unsigned int *space_ptr)
-{
-   unsigned int space = *space_ptr;
-   char *p;
-
-   if (argc + 1 < (int) space)
-     return 0;
-
-   if (space > 128)
-     {
-	if (space > 1024) space += 1024;
-	else space += 128;
-     }
-   else space += 32;
-
-   if (NULL == (p = SLrealloc ((char *)table->string_args, space * sizeof (char *))))
-     return -1;
-   table->string_args = (char **)p;
-   table->string_args [argc] = NULL;
-
-   if (NULL == (p = SLrealloc ((char *)table->int_args, space * sizeof (int))))
-     return -1;
-   table->int_args = (int *)p;
-
-   if (NULL == (p = SLrealloc ((char *)table->double_args, space * sizeof (double))))
-     return -1;
-   table->double_args = (double *)p;
-
-   if (NULL == (p = SLrealloc ((char *)table->arg_type, space * sizeof (unsigned char))))
-     return -1;
-   table->arg_type = (unsigned char *)p;
-
-   *space_ptr = space;
-   return 0;
-}
-
-int SLcmd_execute_string (char *str, SLcmd_Cmd_Table_Type *table)
-{
-   char *s, *b = NULL, *arg_type, *last_str, *cmd_name;
-   SLcmd_Cmd_Type *cmd;
-   char *buf;
-   int token_present;
-   int i;
-   int status;
-   unsigned int len;
-   int argc;
-   unsigned int space;
-
-   table->argc = 0;
-   table->string_args = NULL;
-   table->int_args = NULL;
-   table->double_args = NULL;
-   table->arg_type = NULL;
-
-   buf = SLmake_string (str);
-   if (buf == NULL)
-     return -1;
-
-   status = extract_token (&str, buf);
-   if (status <= 0)
-     {
-	SLfree (buf);
-	return status;
-     }
-
-   if (((len = strlen (buf)) >= 32)
-       || (NULL == (cmd = SLcmd_find_command (buf, table->table))))
-     {
-	SLang_verror (SL_UNDEFINED_NAME,"%s: invalid command", buf);
-	SLfree (buf);
-	return -1;
-     }
-
-   if (NULL == (cmd_name = SLmake_string (buf)))
-     {
-	SLfree (buf);
-	return -1;
-     }
-
-   space = 0;
-   argc = 0;
-   if (-1 == allocate_arg_space (table, argc, &space))
-     {
-	SLfree (buf);
-	return -1;
-     }
-   table->arg_type[argc] = SLANG_STRING_TYPE;
-   table->string_args[argc++] = cmd_name;
-
-   arg_type = cmd->arg_type;
-   status = -1;
-   while (*arg_type)
-     {
-	int guess_type = 0;
-
-	last_str = str;
-
-	if (-1 == allocate_arg_space (table, argc, &space))
-	  goto error;
-
-	if (-1 == (token_present = extract_token (&str, buf)))
-	  goto error;
-
-	table->string_args[argc] = NULL;
-
-	if (token_present)
-	  {
-	     b = buf;
-	     len = strlen (b);
-
-	     if ((*b == '"') && (len > 1))
-	       {
-		  b++;
-		  len -= 2;
-		  b[len] = 0;
-		  guess_type = SLANG_STRING_TYPE;
-		  SLexpand_escaped_string (buf, b, b + len);
-		  len = strlen (buf);
-	       }
-	     else if ((*b == '\'') && (len > 1))
-	       {
-		  char ch;
-		  b++;
-		  len -= 2;
-		  b[len] = 0;
-		  guess_type = SLANG_INT_TYPE;
-		  ch = *b;
-		  if (ch == '\\')
-		    (void) _SLexpand_escaped_char (b, &ch);
-		  sprintf (buf, "%d", (unsigned char) ch);
-		  len = strlen (buf);
-	       }
-	     else guess_type = SLang_guess_type (buf);
-	  }
-
-	switch (*arg_type++)
-	  {
-	     /* variable argument number */
-	   case 'v':
-	     if (token_present == 0) break;
-	   case 'V':
-	     if (token_present == 0)
-	       {
-		  SLang_verror (SL_INVALID_PARM, "%s: Expecting argument", cmd_name);
-		  goto error;
-	       }
-
-	     while (*last_str == ' ') last_str++;
-	     len = strlen (last_str);
-	     str = last_str + len;
-
-	     s = SLmake_nstring (last_str, len);
-	     if (s == NULL) goto error;
-
-	     table->arg_type[argc] = SLANG_STRING_TYPE;
-	     table->string_args[argc++] = s;
-	     break;
-
-	   case 's':
-	     if (token_present == 0) break;
-	   case 'S':
-	     if (token_present == 0)
-	       {
-		  SLang_verror (SL_TYPE_MISMATCH, "%s: Expecting string argument", cmd_name);
-		  goto error;
-	       }
-
-	     s = SLmake_nstring (buf, len);
-	     if (s == NULL) goto error;
-	     table->arg_type[argc] = SLANG_STRING_TYPE;
-	     table->string_args[argc++] = s;
-	     break;
-
-	     /* integer argument */
-	   case 'i':
-	     if (token_present == 0) break;
-	   case 'I':
-	     if ((token_present == 0) || (SLANG_INT_TYPE != guess_type))
-	       {
-		  SLang_verror (SL_TYPE_MISMATCH, "%s: Expecting integer argument", cmd_name);
-		  goto error;
-	       }
-
-	     table->arg_type[argc] = SLANG_INT_TYPE;
-	     table->int_args[argc++] = SLatoi((unsigned char *) buf);
-	     break;
-
-	     /* floating point arg */
-#if SLANG_HAS_FLOAT
-	   case 'f':
-	     if (token_present == 0) break;
-	   case 'F':
-	     if ((token_present == 0) || (SLANG_STRING_TYPE == guess_type))
-	       {
-		  SLang_verror (SL_TYPE_MISMATCH, "%s: Expecting double argument", cmd_name);
-		  goto error;
-	       }
-	     table->arg_type[argc] = SLANG_DOUBLE_TYPE;
-	     table->double_args[argc++] = atof(buf);
-	     break;
-#endif
-	     /* Generic type */
-	   case 'g':
-	     if (token_present == 0) break;
-	   case 'G':
-	     if (token_present == 0)
-	       {
-		  SLang_verror (SL_TYPE_MISMATCH, "%s: Expecting argument", cmd_name);
-		  goto error;
-	       }
-
-	     switch (guess_type)
-	       {
-		case SLANG_INT_TYPE:
-		  table->arg_type[argc] = SLANG_INT_TYPE;
-		  table->int_args[argc++] = SLatoi((unsigned char *) buf);
-		  break;
-
-		case SLANG_STRING_TYPE:
-		  s = SLmake_nstring (buf, len);
-		  if (s == NULL) goto error;
-
-		  table->arg_type[argc] = SLANG_STRING_TYPE;
-		  table->string_args[argc++] = s;
-		  break;
-#if SLANG_HAS_FLOAT
-		case SLANG_DOUBLE_TYPE:
-		  table->arg_type[argc] = SLANG_DOUBLE_TYPE;
-		  table->double_args[argc++] = atof(buf);
-#endif
-	       }
-	     break;
-	  }
-     }
-
-   /*                 call function */
-   status = (*cmd->cmdfun)(argc, table);
-
-   error:
-   if (table->string_args != NULL) for (i = 0; i < argc; i++)
-     {
-	if (NULL != table->string_args[i])
-	  {
-	     SLfree (table->string_args[i]);
-	     table->string_args[i] = NULL;
-	  }
-     }
-   SLfree ((char *)table->string_args); table->string_args = NULL;
-   SLfree ((char *)table->double_args); table->double_args = NULL;
-   SLfree ((char *)table->int_args); table->int_args = NULL;
-   SLfree ((char *)table->arg_type); table->arg_type = NULL;
-
-   SLfree (buf);
-   return status;
-}
-
diff --git a/mdk-stage1/slang/slcmplex.c b/mdk-stage1/slang/slcmplex.c
deleted file mode 100644
index b210dfc04..000000000
--- a/mdk-stage1/slang/slcmplex.c
+++ /dev/null
@@ -1,1142 +0,0 @@
-/* Complex Data Type definition for S-Lang */
-/* Copyright (c) 1997, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/* The rest of the file is enclosed in this #if */
-#if SLANG_HAS_COMPLEX
-
-#if SLANG_HAS_FLOAT
-# include <math.h>
-#endif
-
-#ifdef PI
-# undef PI
-#endif
-#define PI 3.14159265358979323846
-
-int SLang_pop_complex (double *r, double *i)
-{
-   double *c;
-
-   switch (SLang_peek_at_stack ())
-     {
-      case SLANG_COMPLEX_TYPE:
-	if (-1 == SLclass_pop_ptr_obj (SLANG_COMPLEX_TYPE, (VOID_STAR *)&c))
-	  return -1;
-	*r = c[0];
-	*i = c[1];
-	SLfree ((char *) c);
-	break;
-
-      default:
-	*i = 0.0;
-	if (-1 == SLang_pop_double (r, NULL, NULL))
-	  return -1;
-	break;
-
-      case -1:
-	return -1;
-     }
-   return 0;
-}
-
-int SLang_push_complex (double r, double i)
-{
-   double *c;
-
-   c = (double *) SLmalloc (2 * sizeof (double));
-   if (c == NULL)
-     return -1;
-
-   c[0] = r;
-   c[1] = i;
-
-   if (-1 == SLclass_push_ptr_obj (SLANG_COMPLEX_TYPE, (VOID_STAR) c))
-     {
-	SLfree ((char *) c);
-	return -1;
-     }
-   return 0;
-}
-
-double *SLcomplex_times (double *c, double *a, double *b)
-{
-   double a_real, b_real, a_imag, b_imag;
-
-   a_real = a[0];
-   b_real = b[0];
-   a_imag = a[1];
-   b_imag = b[1];
-
-   c[0] = a_real * b_real - a_imag * b_imag;
-   c[1] = a_imag * b_real + a_real * b_imag;
-
-   return c;
-}
-
-double *SLcomplex_divide (double *c, double *a, double *b)
-{
-   double a_real, b_real, a_imag, b_imag;
-   double ratio, invden;
-
-   a_real = a[0];
-   b_real = b[0];
-   a_imag = a[1];
-   b_imag = b[1];
-
-   /* Do it this way to avoid overflow in the denom */
-   if (fabs(b_real) > fabs(b_imag))
-     {
-	ratio = b_imag / b_real;
-	invden = 1.0 / (b_real + b_imag * ratio);
-	c[0] = (a_real + ratio * a_imag) * invden;
-	c[1] = (a_imag - a_real * ratio) * invden;
-     }
-   else
-     {
-	ratio = b_real / b_imag;
-	invden = 1.0 / (b_real * ratio + b_imag);
-	c[0] = (a_real * ratio + a_imag) * invden;
-	c[1] = (a_imag * ratio - a_real) * invden;
-     }
-   return c;
-}
-
-/* a^b = exp (b log a); */
-double *SLcomplex_pow (double *c, double *a, double *b)
-{
-   return SLcomplex_exp (c, SLcomplex_times (c, b, SLcomplex_log (c, a)));
-}
-
-static double *complex_dpow (double *c, double *a, double b)
-{
-   SLcomplex_log (c, a);
-   c[0] *= b;
-   c[1] *= b;
-   return SLcomplex_exp (c, c);
-}
-
-static double *dcomplex_pow (double *c, double a, double *b)
-{
-   a = log (a);
-   c[0] = a * b[0];
-   c[1] = a * b[1];
-   return SLcomplex_exp (c, c);
-}
-
-double SLcomplex_abs (double *z)
-{
-   return SLmath_hypot (z[0], z[1]);
-}
-
-/* It appears that FORTRAN assumes that the branch cut for the log function
- * is along the -x axis.  So, use this for atan2:
- */
-static double my_atan2 (double y, double x)
-{
-   double val;
-
-   val = atan (y/x);
-
-   if (x >= 0)
-     return val;		       /* I, IV */
-
-   if (y <= 0)			       /* III */
-     return val - PI;
-
-   return PI + val;		       /* II */
-}
-
-static void polar_form (double *r, double *theta, double *z)
-{
-   double x, y;
-
-   *r = SLcomplex_abs (z);
-
-   x = z[0];
-   y = z[1];
-
-   if (x == 0.0)
-     {
-	if (y >= 0)
-	  *theta = 0.5 * PI;
-	else
-	  *theta = 1.5 * PI;
-     }
-   else *theta = my_atan2 (y, x);
-}
-
-double *SLcomplex_sin (double *sinz, double *z)
-{
-   double x, y;
-
-   x = z[0]; y = z[1];
-   sinz[0] = sin (x) * cosh (y);
-   sinz[1] = cos (x) * sinh (y);
-   return sinz;
-}
-
-double *SLcomplex_cos (double *cosz, double *z)
-{
-   double x, y;
-
-   x = z[0]; y = z[1];
-   cosz[0] = cos (x) * cosh (y);
-   cosz[1] = -sin (x) * sinh (y);
-   return cosz;
-}
-
-double *SLcomplex_exp (double *expz, double *z)
-{
-   double r, i;
-
-   r = exp (z[0]);
-   i = z[1];
-   expz[0] = r * cos (i);
-   expz[1] = r * sin (i);
-   return expz;
-}
-
-double *SLcomplex_log (double *logz, double *z)
-{
-   double r, theta;
-
-   polar_form (&r, &theta, z);	       /* log R.e^(ix) = log R + ix */
-   logz[0] = log(r);
-   logz[1] = theta;
-   return logz;
-}
-
-double *SLcomplex_log10 (double *log10z, double *z)
-{
-   double l10 = log (10.0);
-   (void) SLcomplex_log (log10z, z);
-   log10z[0] = log10z[0] / l10;
-   log10z[1] = log10z[1] / l10;
-   return log10z;
-}
-
-double *SLcomplex_sqrt (double *sqrtz, double *z)
-{
-   double r, x, y;
-
-   x = z[0];
-   y = z[1];
-
-   r = SLmath_hypot (x, y);
-
-   if (r == 0.0)
-     {
-	sqrtz [0] = sqrtz [1] = 0.0;
-	return sqrtz;
-     }
-
-   if (x >= 0.0)
-     {
-	x = sqrt (0.5 * (r + x));
-	y = 0.5 * y / x;
-     }
-   else
-     {
-	r = sqrt (0.5 * (r - x));
-	x = 0.5 * y / r;
-	y = r;
-
-	if (x < 0.0)
-	  {
-	     x = -x;
-	     y = -y;
-	  }
-     }
-
-   sqrtz[0] = x;
-   sqrtz[1] = y;
-
-   return sqrtz;
-}
-
-double *SLcomplex_tan (double *tanz, double *z)
-{
-   double x, y, invden;
-
-   x = 2 * z[0];
-   y = 2 * z[1];
-   invden = 1.0 / (cos (x) + cosh (y));
-   tanz[0] = invden * sin (x);
-   tanz[1] = invden * sinh (y);
-   return tanz;
-}
-
-/* Utility Function */
-static void compute_alpha_beta (double *z, double *alpha, double *beta)
-{
-   double x, y, a, b;
-
-   x = z[0];
-   y = z[1];
-   a = 0.5 * SLmath_hypot (x + 1, y);
-   b = 0.5 * SLmath_hypot (x - 1, y);
-
-   *alpha = a + b;
-   *beta = a - b;
-}
-
-double *SLcomplex_asin (double *asinz, double *z)
-{
-   double alpha, beta;
-
-   compute_alpha_beta (z, &alpha, &beta);
-   asinz[0] = asin (beta);
-   asinz[1] = log (alpha + sqrt (alpha * alpha - 1));
-   return asinz;
-}
-
-double *SLcomplex_acos (double *acosz, double *z)
-{
-   double alpha, beta;
-
-   compute_alpha_beta (z, &alpha, &beta);
-   acosz[0] = acos (beta);
-   acosz[1] = -log (alpha + sqrt (alpha * alpha - 1));
-   return acosz;
-}
-
-double *SLcomplex_atan (double *atanz, double *z)
-{
-   double x, y;
-   double z1[2], z2[2];
-
-   x = z[0]; y = z[1];
-   z1[0] = x;
-   z1[1] = 1 + y;
-   z2[0] = -x;
-   z2[1] = 1 - y;
-
-   SLcomplex_log (z1, SLcomplex_divide (z2, z1, z2));
-   atanz[0] = -0.5 * z1[1];
-   atanz[1] = 0.5 * z1[0];
-
-   return atanz;
-}
-
-double *SLcomplex_sinh (double *sinhz, double *z)
-{
-   double x, y;
-   x = z[0]; y = z[1];
-   sinhz[0] = sinh (x) * cos (y);
-   sinhz[1] = cosh (x) * sin (y);
-   return sinhz;
-}
-
-double *SLcomplex_cosh (double *coshz, double *z)
-{
-   double x, y;
-   x = z[0]; y = z[1];
-   coshz[0] = cosh (x) * cos (y);
-   coshz[1] = sinh (x) * sin (y);
-   return coshz;
-}
-
-double *SLcomplex_tanh (double *tanhz, double *z)
-{
-   double x, y, invden;
-   x = 2 * z[0];
-   y = 2 * z[1];
-   invden = 1.0 / (cosh (x) + cos (y));
-   tanhz[0] = invden * sinh (x);
-   tanhz[1] = invden * sin (y);
-   return tanhz;
-}
-#if 0
-static double *not_implemented (char *fun, double *p)
-{
-   SLang_verror (SL_NOT_IMPLEMENTED, "%s for complex numbers has not been implemented",
-		 fun);
-   *p = -1.0;
-   return p;
-}
-#endif
-/* Use: asinh(z) = -i asin(iz) */
-double *SLcomplex_asinh (double *asinhz, double *z)
-{
-   double iz[2];
-   
-   iz[0] = -z[1];
-   iz[1] = z[0];
-   
-   (void) SLcomplex_asin (iz, iz);
-   asinhz[0] = iz[1];
-   asinhz[1] = -iz[0];
-   
-   return asinhz;
-}
-
-/* Use: acosh (z) = i acos(z) */
-double *SLcomplex_acosh (double *acoshz, double *z)
-{
-   double iz[2];
-   
-   (void) SLcomplex_acos (iz, z);
-   acoshz[0] = -iz[1];
-   acoshz[1] = iz[0];
-
-   return acoshz;
-}
-
-/* Use: atanh(z) = -i atan(iz) */
-double *SLcomplex_atanh (double *atanhz, double *z)
-{
-   double iz[2];
-   
-   iz[0] = -z[1];
-   iz[1] = z[0];
-   
-   (void) SLcomplex_atan (iz, iz);
-   atanhz[0] = iz[1];
-   atanhz[1] = -iz[0];
-   
-   return atanhz;
-}
-
-static int complex_binary_result (int op, unsigned char a, unsigned char b,
-				  unsigned char *c)
-{
-   (void) a; (void) b;
-
-   switch (op)
-     {
-      default:
-      case SLANG_POW:
-      case SLANG_PLUS:
-      case SLANG_MINUS:
-      case SLANG_TIMES:
-      case SLANG_DIVIDE:
-	*c = SLANG_COMPLEX_TYPE;
-	break;
-
-      case SLANG_EQ:
-      case SLANG_NE:
-	*c = SLANG_CHAR_TYPE;
-	break;
-     }
-   return 1;
-}
-
-static int complex_complex_binary (int op,
-				   unsigned char a_type, VOID_STAR ap, unsigned int na,
-				   unsigned char b_type, VOID_STAR bp, unsigned int nb,
-				   VOID_STAR cp)
-{
-   char *ic;
-   double *a, *b, *c;
-   unsigned int n, n_max;
-   unsigned int da, db;
-
-   (void) a_type;
-   (void) b_type;
-
-   a = (double *) ap;
-   b = (double *) bp;
-   c = (double *) cp;
-   ic = (char *) cp;
-
-   if (na == 1) da = 0; else da = 2;
-   if (nb == 1) db = 0; else db = 2;
-
-   if (na > nb) n_max = na; else n_max = nb;
-   n_max = 2 * n_max;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] + b[0];
-	     c[n + 1] = a[1] + b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_MINUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] - b[0];
-	     c[n + 1] = a[1] - b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_TIMES:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     SLcomplex_times (c + n, a, b);
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_DIVIDE:	       /* / */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     if ((b[0] == 0.0) && (b[1] == 0.0))
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     SLcomplex_divide (c + n, a, b);
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_EQ: 		       /* == */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] == b[0]) && (a[1] == b[1]));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_NE:		       /* != */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] != b[0]) || (a[1] != b[1]));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_POW:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     SLcomplex_pow (c + n, a, b);
-	     a += da; b += db;
-	  }
-	break;
-
-     }
-
-   return 1;
-}
-
-static int complex_double_binary (int op,
-				  unsigned char a_type, VOID_STAR ap, unsigned int na,
-				  unsigned char b_type, VOID_STAR bp, unsigned int nb,
-				  VOID_STAR cp)
-{
-   char *ic;
-   double *a, *b, *c;
-   unsigned int n, n_max;
-   unsigned int da, db;
-
-   (void) a_type;
-   (void) b_type;
-
-   a = (double *) ap;
-   b = (double *) bp;
-   c = (double *) cp;
-   ic = (char *) cp;
-
-   if (na == 1) da = 0; else da = 2;
-   if (nb == 1) db = 0; else db = 1;
-
-   if (na > nb) n_max = na; else n_max = nb;
-   n_max = 2 * n_max;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] + b[0];
-	     c[n + 1] = a[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_MINUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] - b[0];
-	     c[n + 1] = a[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_TIMES:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double b0 = b[0];
-	     c[n] = a[0] * b0;
-	     c[n + 1] = a[1] * b0;
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_DIVIDE:	       /* / */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double b0 = b[0];
-	     if (b0 == 0.0)
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     c[n] = a[0] / b0;
-	     c[n + 1] = a[1] / b0;
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_EQ: 		       /* == */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] == b[0]) && (a[1] == 0.0));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_NE:		       /* != */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] != b[0]) || (a[1] != 0.0));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_POW:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     complex_dpow (c + n, a, b[0]);
-	     a += da; b += db;
-	  }
-	break;
-     }
-
-   return 1;
-}
-
-static int double_complex_binary (int op,
-				  unsigned char a_type, VOID_STAR ap, unsigned int na,
-				  unsigned char b_type, VOID_STAR bp, unsigned int nb,
-				  VOID_STAR cp)
-{
-   char *ic;
-   double *a, *b, *c;
-   unsigned int n, n_max;
-   unsigned int da, db;
-
-   (void) a_type;
-   (void) b_type;
-
-   a = (double *) ap;
-   b = (double *) bp;
-   c = (double *) cp;
-   ic = (char *) cp;
-
-   if (na == 1) da = 0; else da = 1;
-   if (nb == 1) db = 0; else db = 2;
-
-   if (na > nb) n_max = na; else n_max = nb;
-   n_max = 2 * n_max;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] + b[0];
-	     c[n + 1] = b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_MINUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] - b[0];
-	     c[n + 1] = -b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_TIMES:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double a0 = a[0];
-	     c[n] = a0 * b[0];
-	     c[n + 1] = a0 * b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_DIVIDE:	       /* / */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double z[2];
-	     if ((b[0] == 0.0) && (b[1] == 0.0))
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     z[0] = a[0];
-	     z[1] = 0.0;
-	     SLcomplex_divide (c + n, z, b);
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_EQ: 		       /* == */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] == b[0]) && (0.0 == b[1]));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_NE:		       /* != */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] != b[0]) || (0.0 != b[1]));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_POW:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     dcomplex_pow (c + n, a[0], b);
-	     a += da; b += db;
-	  }
-	break;
-     }
-
-   return 1;
-}
-
-static int complex_generic_binary (int op,
-				   unsigned char a_type, VOID_STAR ap, unsigned int na,
-				   unsigned char b_type, VOID_STAR bp, unsigned int nb,
-				   VOID_STAR cp)
-{
-   char *ic;
-   char *b;
-   double *a, *c;
-   unsigned int n, n_max;
-   unsigned int da, db;
-   unsigned int sizeof_b;
-   SLang_To_Double_Fun_Type to_double;
-
-   if (NULL == (to_double = SLarith_get_to_double_fun (b_type, &sizeof_b)))
-     return 0;
-
-   (void) a_type;
-
-   a = (double *) ap;
-   b = (char *) bp;
-   c = (double *) cp;
-   ic = (char *) cp;
-
-   if (na == 1) da = 0; else da = 2;
-   if (nb == 1) db = 0; else db = sizeof_b;
-
-   if (na > nb) n_max = na; else n_max = nb;
-   n_max = 2 * n_max;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_POW:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     complex_dpow (c + n, a, to_double((VOID_STAR)b));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_PLUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] + to_double((VOID_STAR)b);
-	     c[n + 1] = a[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_MINUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] - to_double((VOID_STAR)b);
-	     c[n + 1] = a[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_TIMES:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double b0 = to_double((VOID_STAR)b);
-	     c[n] = a[0] * b0;
-	     c[n + 1] = a[1] * b0;
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_DIVIDE:	       /* / */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double b0 = to_double((VOID_STAR)b);
-	     if (b0 == 0)
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     c[n] = a[0] / b0;
-	     c[n + 1] = a[1] / b0;
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_EQ: 		       /* == */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] == to_double((VOID_STAR)b)) && (a[1] == 0.0));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_NE:		       /* != */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] != to_double((VOID_STAR)b)) || (a[1] != 0.0));
-	     a += da; b += db;
-	  }
-	break;
-     }
-
-   return 1;
-}
-
-static int generic_complex_binary (int op,
-				   unsigned char a_type, VOID_STAR ap, unsigned int na,
-				   unsigned char b_type, VOID_STAR bp, unsigned int nb,
-				   VOID_STAR cp)
-{
-   double *b, *c;
-   char *a, *ic;
-   unsigned int n, n_max;
-   unsigned int da, db;
-   unsigned int sizeof_a;
-   SLang_To_Double_Fun_Type to_double;
-
-   if (NULL == (to_double = SLarith_get_to_double_fun (a_type, &sizeof_a)))
-     return 0;
-
-   (void) b_type;
-
-   a = (char *) ap;
-   b = (double *) bp;
-   c = (double *) cp;
-   ic = (char *) cp;
-
-   if (na == 1) da = 0; else da = sizeof_a;
-   if (nb == 1) db = 0; else db = 2;
-
-   if (na > nb) n_max = na; else n_max = nb;
-   n_max = 2 * n_max;
-
-   switch (op)
-     {
-      default:
-	return 0;
-      case SLANG_POW:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     dcomplex_pow (c + n, to_double((VOID_STAR)a), b);
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_PLUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = to_double((VOID_STAR)a) + b[0];
-	     c[n + 1] = b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_MINUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = to_double((VOID_STAR)a) - b[0];
-	     c[n + 1] = -b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_TIMES:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double a0 = to_double((VOID_STAR)a);
-	     c[n] = a0 * b[0];
-	     c[n + 1] = a0 * b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_DIVIDE:	       /* / */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double z[2];
-	     if ((b[0] == 0.0) && (b[1] == 0.0))
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     z[0] = to_double((VOID_STAR)a);
-	     z[1] = 0.0;
-	     SLcomplex_divide (c + n, z, b);
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_EQ: 		       /* == */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((to_double((VOID_STAR)a) == b[0]) && (0.0 == b[1]));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_NE:		       /* != */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((to_double((VOID_STAR)a) != b[0]) || (0.0 != b[1]));
-	     a += da; b += db;
-	  }
-	break;
-     }
-
-   return 1;
-}
-
-static int complex_unary_result (int op, unsigned char a, unsigned char *b)
-{
-   (void) a;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUSPLUS:
-      case SLANG_MINUSMINUS:
-      case SLANG_CHS:
-      case SLANG_MUL2:
-	*b = SLANG_COMPLEX_TYPE;
-	break;
-
-      case SLANG_SQR:		       /* |Real|^2 + |Imag|^2 ==> double */
-      case SLANG_ABS:		       /* |z| ==> double */
-	*b = SLANG_DOUBLE_TYPE;
-	break;
-
-      case SLANG_SIGN:
-	*b = SLANG_INT_TYPE;
-	break;
-     }
-   return 1;
-}
-
-static int complex_unary (int op,
-			  unsigned char a_type, VOID_STAR ap, unsigned int na,
-			  VOID_STAR bp)
-{
-   unsigned int n;
-   double *a, *b;
-   int *ic;
-
-   (void) a_type;
-
-   a = (double *) ap;
-   b = (double *) bp;
-   ic = (int *) bp;
-
-   na = 2 * na;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUSPLUS:
-	for (n = 0; n < na; n += 2) b[n] = (a[n] + 1);
-	break;
-      case SLANG_MINUSMINUS:
-	for (n = 0; n < na; n += 2) b[n] = (a[n] - 1);
-	break;
-      case SLANG_CHS:
-	for (n = 0; n < na; n += 2)
-	  {
-	     b[n] = -(a[n]);
-	     b[n + 1] = -(a[n + 1]);
-	  }
-	break;
-      case SLANG_SQR:		       /* |Real|^2 + |Imag|^2 ==> double */
-	for (n = 0; n < na; n += 2)
-	  b[n/2] = (a[n] * a[n] + a[n + 1] * a[n + 1]);
-	break;
-
-      case SLANG_MUL2:
-	for (n = 0; n < na; n += 2)
-	  {
-	     b[n] = (2 * a[n]);
-	     b[n + 1] = (2 * a[n + 1]);
-	  }
-	break;
-
-      case SLANG_ABS:		       /* |z| ==> double */
-	for (n = 0; n < na; n += 2)
-	  b[n/2] = SLcomplex_abs (a + n);
-	break;
-
-      case SLANG_SIGN:
-	/* Another creative extension.  Lets return an integer which indicates
-	 * whether the complex number is in the upperhalf plane or not.
-	 */
-	for (n = 0; n < na; n += 2)
-	  {
-	     if (a[n + 1] < 0.0) ic[n/2] = -1;
-	     else if (a[n + 1] > 0.0) ic[n/2] = 1;
-	     else ic[n/2] = 0;
-	  }
-	break;
-     }
-
-   return 1;
-}
-
-static int
-complex_typecast (unsigned char from_type, VOID_STAR from, unsigned int num,
-		  unsigned char to_type, VOID_STAR to)
-{
-   double *z;
-   double *d;
-   char *i;
-   unsigned int n;
-   unsigned int sizeof_i;
-   SLang_To_Double_Fun_Type to_double;
-
-   (void) to_type;
-
-   z = (double *) to;
-
-   switch (from_type)
-     {
-      default:
-	if (NULL == (to_double = SLarith_get_to_double_fun (from_type, &sizeof_i)))
-	  return 0;
-	i = (char *) from;
-	for (n = 0; n < num; n++)
-	  {
-	     *z++ = to_double ((VOID_STAR) i);
-	     *z++ = 0.0;
-
-	     i += sizeof_i;
-	  }
-	break;
-
-      case SLANG_DOUBLE_TYPE:
-	d = (double *) from;
-	for (n = 0; n < num; n++)
-	  {
-	     *z++ = d[n];
-	     *z++ = 0.0;
-	  }
-	break;
-     }
-
-   return 1;
-}
-
-static void complex_destroy (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   SLfree ((char *)*(double **) ptr);
-}
-
-static int complex_push (unsigned char type, VOID_STAR ptr)
-{
-   double *z;
-
-   (void) type;
-   z = *(double **) ptr;
-   return SLang_push_complex (z[0], z[1]);
-}
-
-static int complex_pop (unsigned char type, VOID_STAR ptr)
-{
-   double *z;
-
-   (void) type;
-   z = *(double **) ptr;
-   return SLang_pop_complex (&z[0], &z[1]);
-}
-
-int _SLinit_slcomplex (void)
-{
-   SLang_Class_Type *cl;
-   unsigned char *types;
-
-   if (NULL == (cl = SLclass_allocate_class ("Complex_Type")))
-     return -1;
-
-   (void) SLclass_set_destroy_function (cl, complex_destroy);
-   (void) SLclass_set_push_function (cl, complex_push);
-   (void) SLclass_set_pop_function (cl, complex_pop);
-
-   if (-1 == SLclass_register_class (cl, SLANG_COMPLEX_TYPE, 2 * sizeof (double),
-				     SLANG_CLASS_TYPE_VECTOR))
-     return -1;
-
-   types = _SLarith_Arith_Types;
-   while (*types != SLANG_DOUBLE_TYPE)
-     {
-	unsigned char t = *types++;
-
-	if ((-1 == SLclass_add_binary_op (t, SLANG_COMPLEX_TYPE, generic_complex_binary, complex_binary_result))
-	    || (-1 == SLclass_add_binary_op (SLANG_COMPLEX_TYPE, t, complex_generic_binary, complex_binary_result))
-	    || (-1 == (SLclass_add_typecast (t, SLANG_COMPLEX_TYPE, complex_typecast, 1))))
-	  return -1;
-     }
-
-   if ((-1 == (SLclass_add_binary_op (SLANG_COMPLEX_TYPE, SLANG_COMPLEX_TYPE, complex_complex_binary, complex_binary_result)))
-       || (-1 == (SLclass_add_binary_op (SLANG_COMPLEX_TYPE, SLANG_DOUBLE_TYPE, complex_double_binary, complex_binary_result)))
-       || (-1 == (SLclass_add_binary_op (SLANG_DOUBLE_TYPE, SLANG_COMPLEX_TYPE, double_complex_binary, complex_binary_result)))
-       || (-1 == (SLclass_add_unary_op (SLANG_COMPLEX_TYPE, complex_unary, complex_unary_result)))
-       || (-1 == (SLclass_add_typecast (SLANG_DOUBLE_TYPE, SLANG_COMPLEX_TYPE, complex_typecast, 1))))
-     return -1;
-
-   return 0;
-}
-
-#endif				       /* if SLANG_HAS_COMPLEX */
-
diff --git a/mdk-stage1/slang/slcompat.c b/mdk-stage1/slang/slcompat.c
deleted file mode 100644
index 5aa122483..000000000
--- a/mdk-stage1/slang/slcompat.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* These functions are provided for backward compatibility and are obsolete.
- * Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/* Compatibility */
-int SLang_init_slunix (void)
-{
-   if ((-1 == SLang_init_posix_dir ())
-       || (-1 == SLang_init_posix_process ())
-       || (-1 == SLdefine_for_ifdef ("__SLUNIX__")))
-     return -1;
-
-   return 0;
-}
-
-int SLang_init_slfile (void)
-{
-   if ((-1 == SLang_init_stdio ())
-       || (-1 == SLang_init_posix_dir ())
-       || (-1 == SLdefine_for_ifdef("__SLFILE__")))
-     return -1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slcurses.c b/mdk-stage1/slang/slcurses.c
deleted file mode 100644
index f1212afc8..000000000
--- a/mdk-stage1/slang/slcurses.c
+++ /dev/null
@@ -1,972 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include <signal.h>
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-#include "slcurses.h"
-
-/* This file is meant to implement a primitive curses implementation in
- * terms of SLsmg calls.  The fact is that the interfaces are sufficiently
- * different that a 100% emulation is not possible.
- */
-
-SLcurses_Window_Type *SLcurses_Stdscr;
-int SLcurses_Esc_Delay = 150;	       /* 0.15 seconds */
-SLtt_Char_Type SLcurses_Acs_Map [128];
-int SLcurses_Is_Endwin = 1;
-int SLcurses_Num_Colors = 8;
-
-static void blank_line (SLsmg_Char_Type *b, unsigned int len, SLsmg_Char_Type color)
-{
-   SLsmg_Char_Type *bmax;
-
-   bmax = b + len;
-   color = SLSMG_BUILD_CHAR(' ', color);
-
-   while (b < bmax) *b++ = color;
-}
-
-static int va_mvprintw (SLcurses_Window_Type *w, int r, int c, int do_move,
-			char *fmt, va_list ap)
-{
-   char buf[1024];
-
-   if (do_move) SLcurses_wmove (w, r, c);
-
-   (void) _SLvsnprintf (buf, sizeof(buf), fmt, ap);
-
-   SLcurses_waddnstr (w, buf, -1);
-   return 0;
-}
-
-int SLcurses_mvprintw (int r, int c, char *fmt, ...)
-{
-   va_list ap;
-
-   va_start(ap, fmt);
-   va_mvprintw (SLcurses_Stdscr, r, c, 1, fmt, ap);
-   va_end(ap);
-
-   return 0;
-}
-
-int SLcurses_mvwprintw (SLcurses_Window_Type *w, int r, int c, char *fmt, ...)
-{
-   va_list ap;
-
-   va_start(ap, fmt);
-   va_mvprintw (w, r, c, 1, fmt, ap);
-   va_end(ap);
-
-   return 0;
-}
-
-int SLcurses_wprintw (SLcurses_Window_Type *w, char *fmt, ...)
-{
-   va_list ap;
-
-   va_start(ap, fmt);
-   va_mvprintw (w, 0, 0, 0, fmt, ap);
-   va_end(ap);
-
-   return 0;
-}
-
-int SLcurses_printw (char *fmt, ...)
-{
-   va_list ap;
-
-   va_start(ap, fmt);
-   va_mvprintw (SLcurses_Stdscr, 0, 0, 0, fmt, ap);
-   va_end(ap);
-
-   return 0;
-}
-
-int SLcurses_nil (void)
-{
-   return 0;
-}
-
-int SLcurses_has_colors(void)
-{
-   return SLtt_Use_Ansi_Colors;
-}
-
-int SLcurses_nodelay (SLcurses_Window_Type *w, int onoff)
-{
-   w->delay_off = (onoff ? 0 : -1);
-   return 0;
-}
-
-int SLcurses_wgetch (SLcurses_Window_Type *w)
-{
-   if (w == NULL)
-     return ERR;
-
-   SLcurses_wrefresh (w);
-
-   if ((w->delay_off == -1) ||
-       SLang_input_pending (w->delay_off))
-     {
-	if (w->use_keypad)
-	  {
-	     int ch = SLang_getkey ();
-	     if (ch == '\033')
-	       {
-		  if (0 == SLang_input_pending (ESCDELAY / 100))
-		    return ch;
-	       }
-	     else if (ch == 0xFFFF) return ERR;
-	     SLang_ungetkey (ch);
-	     return SLkp_getkey ();
-	  }
-	return SLang_getkey ();
-     }
-
-   return ERR;
-}
-
-int SLcurses_getch (void)
-{
-   return SLcurses_wgetch (SLcurses_Stdscr);
-}
-
-/* This is a super hack.  That fact is that SLsmg and curses
- * are incompatible.
- */
-static unsigned char Color_Objects[256];
-
-static unsigned int map_attr_to_object (SLtt_Char_Type attr)
-{
-   unsigned int obj;
-   SLtt_Char_Type at;
-
-   obj = (attr >> 8) & 0xFF;
-
-   if (SLtt_Use_Ansi_Colors)
-     {
-	if (Color_Objects[obj] != 0) return obj;
-
-	at = SLtt_get_color_object (obj & 0xF);
-
-	if (attr & A_BOLD) at |= SLTT_BOLD_MASK;
-	if (attr & A_UNDERLINE) at |= SLTT_ULINE_MASK;
-	if (attr & A_REVERSE) at |= SLTT_REV_MASK;
-
-	SLtt_set_color_object (obj, at);
-
-	Color_Objects[obj] = 1;
-     }
-   else obj = obj & 0xF0;
-
-   return obj;
-
-}
-
-int SLcurses_start_color (void)
-{
-   int f, b;
-   int obj;
-
-   if (SLtt_Use_Ansi_Colors == 0) return -1;
-
-   obj = 0;
-   for (f = 0; f < 16; f++)
-     {
-	for (b = 0; b < 16; b++)
-	  {
-	     obj++;
-	     SLtt_set_color_fgbg (obj, f, b);
-	  }
-     }
-   return 0;
-}
-
-#ifdef SIGINT
-static void sigint_handler (int sig)
-{
-   SLang_reset_tty ();
-   SLsmg_reset_smg ();
-   exit (sig);
-}
-#endif
-
-/* Values are assumed to be 0, 1, 2.  This fact is exploited */
-static int TTY_State;
-
-static int init_tty (int suspend_ok)
-{
-   if (-1 == SLang_init_tty (-1, 1, 0))
-     return -1;
-
-#ifdef REAL_UNIX_SYSTEM
-   if (suspend_ok) SLtty_set_suspend_state (1);
-#endif
-   return 0;
-}
-
-int SLcurses_raw (void)
-{
-   TTY_State = 1;
-   return init_tty (0);
-}
-
-int SLcurses_cbreak (void)
-{
-   TTY_State = 2;
-   return init_tty (1);
-}
-
-#if defined(SIGTSTP) && defined(SIGSTOP)
-static void sigtstp_handler (int sig)
-{
-   sig = errno;
-
-   SLsmg_suspend_smg ();
-
-   if (TTY_State)
-     SLang_reset_tty ();
-
-   kill(getpid(),SIGSTOP);
-
-   SLsmg_resume_smg ();
-
-   if (TTY_State) init_tty (TTY_State - 1);
-
-   signal (SIGTSTP, sigtstp_handler);
-   errno = sig;
-}
-#endif
-
-SLcurses_Window_Type *SLcurses_initscr (void)
-{
-   SLcurses_Is_Endwin = 0;
-   SLsmg_Newline_Behavior = SLSMG_NEWLINE_MOVES;
-   SLtt_get_terminfo ();
-
-#if !defined(IBMPC_SYSTEM) && !defined(VMS)
-   if (-1 == (SLcurses_Num_Colors = SLtt_tgetnum ("Co")))
-#endif
-     SLcurses_Num_Colors = 8;
-
-   if ((-1 == SLkp_init ())
-       || (-1 == SLcurses_cbreak ())
-       || (NULL == (SLcurses_Stdscr = SLcurses_newwin (0, 0, 0, 0)))
-       || (-1 == SLsmg_init_smg ()))
-     {
-	SLang_doerror (NULL);
-	SLang_exit_error ("SLcurses_initscr: init failed\n");
-	return NULL;
-     }
-
-#ifdef SIGINT
-   signal (SIGINT, sigint_handler);
-#endif
-
-#if defined(SIGTSTP) && defined(SIGSTOP)
-   signal (SIGTSTP, sigtstp_handler);
-#endif
-
-   SLtt_set_mono (A_BOLD >> 8, NULL, SLTT_BOLD_MASK);
-   SLtt_set_mono (A_UNDERLINE >> 8, NULL, SLTT_ULINE_MASK);
-   SLtt_set_mono (A_REVERSE >> 8, NULL, SLTT_REV_MASK);
-   /* SLtt_set_mono (A_BLINK >> 8, NULL, SLTT_BLINK_MASK); */
-   SLtt_set_mono ((A_BOLD|A_UNDERLINE) >> 8, NULL, SLTT_ULINE_MASK|SLTT_BOLD_MASK);
-   SLtt_set_mono ((A_REVERSE|A_UNDERLINE) >> 8, NULL, SLTT_ULINE_MASK|SLTT_REV_MASK);
-
-   if (SLtt_Has_Alt_Charset)
-     {
-       SLcurses_Acs_Map[SLSMG_ULCORN_CHAR] = SLSMG_ULCORN_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_URCORN_CHAR] = SLSMG_URCORN_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_LLCORN_CHAR] = SLSMG_LLCORN_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_LRCORN_CHAR] = SLSMG_LRCORN_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_UTEE_CHAR] = SLSMG_UTEE_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_DTEE_CHAR] = SLSMG_DTEE_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_LTEE_CHAR] = SLSMG_LTEE_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_RTEE_CHAR] = SLSMG_RTEE_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_VLINE_CHAR] = SLSMG_VLINE_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_HLINE_CHAR] = SLSMG_HLINE_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_PLUS_CHAR] = SLSMG_PLUS_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_CKBRD_CHAR] = SLSMG_CKBRD_CHAR | A_ALTCHARSET;
-     }
-   else
-     {
-       /* ugly defaults to use on terminals which don't support graphics */
-       SLcurses_Acs_Map[SLSMG_ULCORN_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_URCORN_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_LLCORN_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_LRCORN_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_UTEE_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_DTEE_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_LTEE_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_RTEE_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_VLINE_CHAR] = '|';
-       SLcurses_Acs_Map[SLSMG_HLINE_CHAR] = '-';
-       SLcurses_Acs_Map[SLSMG_PLUS_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_CKBRD_CHAR] = '#';
-     }
-
-   return SLcurses_Stdscr;
-}
-
-int SLcurses_wattrset (SLcurses_Window_Type *w, SLtt_Char_Type ch)
-{
-   unsigned int obj;
-
-   obj = map_attr_to_object (ch);
-   w->color = obj;
-   w->attr = ch;
-   return 0;
-}
-
-int SLcurses_wattroff (SLcurses_Window_Type *w, SLtt_Char_Type ch)
-{
-   if (SLtt_Use_Ansi_Colors)
-     return SLcurses_wattrset (w, 0);
-
-   w->attr &= ~ch;
-   return SLcurses_wattrset (w, w->attr);
-}
-
-int SLcurses_wattron (SLcurses_Window_Type *w, SLtt_Char_Type ch)
-{
-   if (SLtt_Use_Ansi_Colors)
-     return SLcurses_wattrset (w, ch);
-
-   w->attr |= ch;
-   return SLcurses_wattrset (w, w->attr);
-}
-
-int SLcurses_delwin (SLcurses_Window_Type *w)
-{
-   if (w == NULL) return 0;
-   if (w->lines != NULL)
-     {
-	SLsmg_Char_Type **lines = w->lines;
-	if (w->is_subwin == 0)
-	  {
-	     unsigned int r, rmax;
-
-	     rmax = w->nrows;
-	     for (r = 0; r < rmax; r++)
-	       {
-		  SLfree ((char *)lines[r]);
-	       }
-	  }
-
-	SLfree ((char *)lines);
-     }
-
-   SLfree ((char *)w);
-   if (w == SLcurses_Stdscr)
-     SLcurses_Stdscr = NULL;
-   return 0;
-}
-
-SLcurses_Window_Type *SLcurses_newwin (unsigned int nrows, unsigned int ncols,
-				       unsigned int r, unsigned int c)
-{
-   SLcurses_Window_Type *win;
-   SLsmg_Char_Type **lines;
-
-   if (r >= (unsigned int) SLtt_Screen_Rows)
-     return NULL;
-   if (c >= (unsigned int) SLtt_Screen_Cols)
-     return NULL;
-
-   if (NULL == (win = (SLcurses_Window_Type *) SLmalloc (sizeof (SLcurses_Window_Type))))
-     return NULL;
-
-   SLMEMSET ((char *) win, 0, sizeof (SLcurses_Window_Type));
-
-   if (nrows == 0)
-     nrows = (unsigned int) SLtt_Screen_Rows - r;
-   if (ncols == 0)
-     ncols = (unsigned int) SLtt_Screen_Cols - c;
-
-   lines = (SLsmg_Char_Type **) SLmalloc (nrows * sizeof (SLsmg_Char_Type *));
-   if (lines == NULL)
-     {
-	SLcurses_delwin (win);
-	return NULL;
-     }
-
-   SLMEMSET ((char *) lines, 0, nrows * sizeof (SLsmg_Char_Type *));
-
-   win->lines = lines;
-   win->scroll_max = win->nrows = nrows;
-   win->ncols = ncols;
-   win->_begy = r;
-   win->_begx = c;
-   win->_maxx = (c + ncols) - 1;
-   win->_maxy = (r + nrows) - 1;
-   win->modified = 1;
-   win->delay_off = -1;
-
-   for (r = 0; r < nrows; r++)
-     {
-	SLsmg_Char_Type *b;
-
-	b = (SLsmg_Char_Type *) SLmalloc (ncols * sizeof (SLsmg_Char_Type));
-	if (b == NULL)
-	  {
-	     SLcurses_delwin (win);
-	     return NULL;
-	  }
-	lines [r] = b;
-	blank_line (b, ncols, 0);
-     }
-
-   return win;
-}
-
-int SLcurses_wmove (SLcurses_Window_Type *win, unsigned int r, unsigned int c)
-{
-   if (win == NULL) return -1;
-   win->_cury = r;
-   win->_curx = c;
-   win->modified = 1;
-   return 0;
-}
-
-static int do_newline (SLcurses_Window_Type *w)
-{
-   w->_curx = 0;
-   w->_cury += 1;
-   if (w->_cury >= w->scroll_max)
-     {
-	w->_cury = w->scroll_max - 1;
-	if (w->scroll_ok)
-	  SLcurses_wscrl (w, 1);
-     }
-
-   return 0;
-}
-
-int SLcurses_waddch (SLcurses_Window_Type *win, SLtt_Char_Type attr)
-{
-   SLsmg_Char_Type *b, ch;
-   SLsmg_Char_Type color;
-
-   if (win == NULL) return -1;
-
-   if (win->_cury >= win->nrows)
-     {
-	/* Curses seems to move current postion to top of window. */
-	win->_cury = win->_curx = 0;
-	return -1;
-     }
-
-   win->modified = 1;
-
-   ch = SLSMG_EXTRACT_CHAR(attr);
-
-   if (attr == ch)
-     color = win->color;
-   else
-     {
-	/* hack to pick up the default color for graphics chars */
-	if (((attr & A_COLOR) == 0) && ((attr & A_ALTCHARSET) != 0))
-	  {
-	     /* FIXME: priority=medium: Use SLSMG_?? instead of << */
-	     attr |= win->color << 8;
-	  }
-	color = map_attr_to_object (attr);
-     }
-
-   if (ch < ' ')
-     {
-	if (ch == '\n')
-	  {
-	     SLcurses_wclrtoeol (win);
-	     return do_newline (win);
-	  }
-
-	if (ch == '\r')
-	  {
-	     win->_curx = 0;
-	     return 0;
-	  }
-
-	if (ch == '\b')
-	  {
-	     if (win->_curx > 0)
-	       win->_curx--;
-
-	     return 0;
-	  }
-
-	/* HACK HACK!!!! */
-	if (ch == '\t') ch = ' ';
-     }
-
-   if (win->_curx >= win->ncols)
-     do_newline (win);
-
-   b = win->lines[win->_cury] + win->_curx;
-   *b = SLSMG_BUILD_CHAR(ch,color);
-   win->_curx++;
-
-   return 0;
-}
-
-int SLcurses_wnoutrefresh (SLcurses_Window_Type *w)
-{
-   unsigned int len;
-   unsigned int r, c;
-   unsigned int i, imax;
-
-   if (SLcurses_Is_Endwin)
-     {
-	if (TTY_State) init_tty (TTY_State - 1);
-       	SLsmg_resume_smg ();
-	SLcurses_Is_Endwin = 0;
-     }
-
-   if (w == NULL)
-     {
-	SLsmg_refresh ();
-	return -1;
-     }
-
-   if (w->modified == 0)
-     return 0;
-
-   r = w->_begy;
-   c = w->_begx;
-
-   len = w->ncols;
-   imax = w->nrows;
-
-   for (i = 0; i < imax; i++)
-     {
-	SLsmg_gotorc (r, c);
-	SLsmg_write_color_chars (w->lines[i], len);
-	r++;
-     }
-
-   if (w->has_box)
-     SLsmg_draw_box(w->_begy, w->_begx, w->nrows, w->ncols);
-
-   SLsmg_gotorc (w->_begy + w->_cury, w->_begx + w->_curx);
-   w->modified = 0;
-   return 0;
-}
-
-int SLcurses_wrefresh (SLcurses_Window_Type *w)
-{
-   if (w == NULL)
-     return -1;
-
-   if (w->modified == 0)
-     return 0;
-
-   SLcurses_wnoutrefresh (w);
-   SLsmg_refresh ();
-   return 0;
-}
-
-int SLcurses_wclrtoeol (SLcurses_Window_Type *w)
-{
-   SLsmg_Char_Type *b, *bmax;
-   SLsmg_Char_Type blank;
-
-   if (w == NULL) return -1;
-   if (w->_cury >= w->nrows)
-     return 0;
-
-   w->modified = 1;
-
-   blank = SLSMG_BUILD_CHAR(' ',w->color);
-
-   b = w->lines[w->_cury];
-   bmax = b + w->ncols;
-   b += w->_curx;
-
-   while (b < bmax) *b++ = blank;
-   return 0;
-}
-
-int SLcurses_wclrtobot (SLcurses_Window_Type *w)
-{
-   SLsmg_Char_Type *b, *bmax;
-   SLsmg_Char_Type blank;
-   unsigned int r;
-
-   if (w == NULL) return -1;
-
-   w->modified = 1;
-   blank = SLSMG_BUILD_CHAR(' ',w->color);
-   SLcurses_wclrtoeol (w);
-   for (r = w->_cury + 1; r < w->nrows; r++)
-     {
-	b = w->lines [r];
-	bmax = b + w->ncols;
-
-	while (b < bmax) *b++ = blank;
-     }
-
-   return 0;
-}
-
-int SLcurses_wscrl (SLcurses_Window_Type *w, int n)
-{
-   SLsmg_Char_Type **lines;
-   unsigned int r, rmax, rmin, ncols;
-   SLsmg_Char_Type color;
-
-   if ((w == NULL) || (w->scroll_ok == 0))
-     return -1;
-
-   w->modified = 1;
-#if 0
-   if (w->is_subwin)
-     {
-	SLang_reset_tty ();
-	SLsmg_reset_smg ();
-	fprintf (stderr, "\rAttempt to scroll a subwindow\n");
-	exit (1);
-     }
-#endif
-
-   color = w->color;
-   ncols = w->ncols;
-   lines = w->lines;
-   rmax = w->scroll_max;
-   rmin = w->scroll_min;
-   if (rmax > w->nrows)
-     rmax = w->nrows;
-   if (rmin >= rmax)
-     return 0;
-
-   while (n > 0)
-     {
-	for (r = rmin + 1; r < rmax; r++)
-	  {
-	     /* lines[r - 1] = lines[r]; */
-	     memcpy ((char *)lines[r - 1], (char *)lines[r],
-		     sizeof (SLsmg_Char_Type) * ncols);
-	  }
-	blank_line (lines[rmax - 1], ncols, color);
-	n--;
-     }
-
-   rmax--;
-   while (n < 0)
-     {
-	for (r = rmax; r > rmin; r--)
-	  {
-	     memcpy ((char *)lines[r], (char *)lines[r - 1],
-		     sizeof (SLsmg_Char_Type) * ncols);
-	  }
-	blank_line (lines[rmin], ncols, color);
-	n++;
-     }
-
-   /* wmove (w, w->nrows - 1, 0); */
-   /* wclrtobot (w); */
-   return 0;
-}
-
-/* Note: if len is < 0, entire string will be used.
- */
-int SLcurses_waddnstr (SLcurses_Window_Type *w, char *str, int len)
-{
-   SLsmg_Char_Type *b;
-   SLsmg_Char_Type color;
-   unsigned char ch;
-   unsigned int nrows, ncols, crow, ccol;
-
-   if ((w == NULL)
-       || (str == NULL))
-     return -1;
-
-   w->modified = 1;
-   nrows = w->nrows;
-   ncols = w->ncols;
-   crow = w->_cury;
-   ccol = w->_curx;
-   color = w->color;
-
-   if (w->scroll_max <= nrows)
-     nrows = w->scroll_max;
-
-   if (crow >= nrows)
-     crow = 0;			       /* wrap back to top */
-
-   b = w->lines [crow] + ccol;
-
-   while (len && ((ch = (unsigned char) *str++) != 0))
-     {
-	len--;
-
-	if (ch == '\n')
-	  {
-	     w->_cury = crow;
-	     w->_curx = ccol;
-	     SLcurses_wclrtoeol (w);
-	     do_newline (w);
-	     crow = w->_cury;
-	     ccol = w->_curx;
-	     b = w->lines[crow];
-	     continue;
-	  }
-
-	if (ccol >= ncols)
-	  {
-	     ccol = 0;
-	     crow++;
-	     if (crow >= nrows)
-	       {
-		  w->_curx = 0;
-		  w->_cury = crow;
-		  do_newline (w);
-		  crow = w->_cury;
-		  ccol = w->_curx;
-	       }
-
-	     b = w->lines [crow];
-	  }
-
-	if (ch == '\t')
-	  {
-	     unsigned int n = ccol;
-	     n += SLsmg_Tab_Width;
-	     n = SLsmg_Tab_Width - (n % SLsmg_Tab_Width);
-	     if (ccol + n > ncols) n = ncols - len;
-	     ccol += n;
-	     while (n--)
-	       *b++ = SLSMG_BUILD_CHAR(' ',color);
-	     continue;
-	  }
-
-	*b++ = SLSMG_BUILD_CHAR(ch, color);
-	ccol++;
-     }
-
-   w->_curx = ccol;
-   w->_cury = crow;
-
-   return 0;
-}
-
-/* This routine IS NOT CORRECT.  It needs to compute the proper overlap
- * and copy accordingly.  Here, I just assume windows are same size.
- */
-#if 0
-int SLcurses_overlay (SLcurses_Window_Type *swin, SLcurses_Window_Type *dwin)
-{
-   SLsmg_Char_Type *s, *smax, *d, *dmax;
-
-   if ((swin == NULL) || (dwin == NULL))
-     return -1;
-
-   s = swin->buf;
-   smax = swin->bufmax;
-   d = dwin->buf;
-   dmax = dwin->bufmax;
-
-   while ((s < smax) && (d < dmax))
-     {
-	SLsmg_Char_Type ch = *s++;
-	if (SLSMG_EXTRACT_CHAR(ch) != ' ')
-	  *d = ch;
-	d++;
-     }
-
-   return -1;			       /* not implemented */
-}
-
-#endif
-
-SLcurses_Window_Type *SLcurses_subwin (SLcurses_Window_Type *orig,
-				       unsigned int nlines, unsigned int ncols,
-				       unsigned int begin_y, unsigned int begin_x)
-{
-   SLcurses_Window_Type *sw;
-   int r, c;
-   unsigned int i;
-
-   if (orig == NULL)
-     return NULL;
-
-   sw = (SLcurses_Window_Type *) SLmalloc (sizeof (SLcurses_Window_Type));
-   if (sw == NULL)
-     return NULL;
-
-   SLMEMSET ((char *)sw, 0, sizeof (SLcurses_Window_Type));
-#if 1
-   r = begin_y - orig->_begy;
-#else
-   r = 1 + ((int)orig->nrows - (int)nlines) / 2;
-#endif
-   if (r < 0) r = 0;
-   if (r + nlines > orig->nrows) nlines = orig->nrows - r;
-
-   c = ((int)orig->ncols - (int)ncols) / 2;
-   if (c < 0) c = 0;
-   if (c + ncols > orig->ncols) ncols = orig->ncols - c;
-
-   sw->scroll_min = 0;
-   sw->scroll_max = sw->nrows = nlines;
-   sw->ncols = ncols;
-   sw->_begy = begin_y;
-   sw->_begx = begin_x;
-   sw->_maxx = (begin_x + ncols) - 1;
-   sw->_maxy = (begin_y + nlines) - 1;
-
-   sw->lines = (SLsmg_Char_Type **) SLmalloc (nlines * sizeof (SLsmg_Char_Type *));
-   if (sw->lines == NULL)
-     {
-	SLcurses_delwin (sw);
-	return NULL;
-     }
-
-   for (i = 0; i < nlines; i++)
-     {
-	sw->lines [i] = orig->lines [r + i] + c;
-     }
-
-   sw->is_subwin = 1;
-   return sw;
-}
-
-int SLcurses_wclear (SLcurses_Window_Type *w)
-{
-   unsigned int i;
-
-   if (w != NULL) w->modified = 1;
-   for (i=0; i < w->nrows; i++)
-     blank_line (w->lines[i], w->ncols, w->color);
-   return 0;
-}
-
-int SLcurses_wdelch (SLcurses_Window_Type *w)
-{
-   SLsmg_Char_Type *p, *p1, *pmax;
-
-   p = w->lines[w->_cury];
-   pmax = p + w->ncols;
-   p += w->_curx;
-   p1 = p + 1;
-
-   while (p1 < pmax)
-     {
-	*p = *p1;
-	p = p1;
-	p1++;
-     }
-
-   if (p < pmax)
-     *p = SLSMG_BUILD_CHAR(' ',w->color);
-
-   w->modified = 1;
-   return 0;
-}
-
-int SLcurses_winsch (SLcurses_Window_Type *w, int ch)
-{
-   SLsmg_Char_Type *p, *p1, *pmax;
-
-   p = w->lines[w->_cury];
-   pmax = p + w->ncols;
-   p += w->_curx;
-   p1 = pmax - 1;
-
-   while (pmax > p)
-     {
-	*pmax = *p1;
-	pmax = p1;
-	p1--;
-     }
-
-   if (p < pmax)
-     *p = SLSMG_BUILD_CHAR(ch, w->color);
-
-   w->modified = 1;
-   return 0;
-}
-
-int SLcurses_endwin (void)
-{
-   SLcurses_Is_Endwin = 1;
-   SLsmg_suspend_smg ();
-   SLang_reset_tty ();
-   return 0;
-}
-
-#if 0
-int SLcurses_mvwscanw (SLcurses_Window_Type *w, unsigned int r, unsigned int c,
-		       char *fmt, ...)
-{
-#if HAVE_VFSCANF
-   int ret;
-   va_list ap;
-
-   SLcurses_wmove (w, r, c);
-   SLcurses_wrefresh (w);
-
-   va_start(ap, fmt);
-   ret = vfscanf (stdin, fmt, ap);
-   va_end(ap);
-   return ret;
-#else
-   return 0;
-#endif
-}
-
-int SLcurses_wscanw (SLcurses_Window_Type *w, char *fmt, ...)
-{
-#if HAVE_VFSCANF
-  va_list ap;
-   int ret;
-
-   SLcurses_wrefresh (w);
-
-   va_start(ap, fmt);
-   ret = vfscanf (stdin, fmt, ap);
-   va_end(ap);
-
-   return ret;
-#else
-   return 0;
-#endif
-}
-
-int SLcurses_scanw (char *fmt, ...)
-{
-#ifdef HAVE_VFSCANF
-   va_list ap;
-   int ret;
-
-   SLcurses_wrefresh (SLcurses_Stdscr);
-
-   va_start(ap, fmt);
-   ret = vfscanf (stdin, fmt, ap);
-   va_end(ap);
-
-   return ret;
-#else
-   return 0;
-#endif
-}
-#endif
-
-int SLcurses_clearok (SLcurses_Window_Type *w, int bf)
-{
-   if (bf)
-     {
-	SLsmg_cls ();
-	w->modified = 1;
-     }
-   return 0;
-}
diff --git a/mdk-stage1/slang/slcurses.h b/mdk-stage1/slang/slcurses.h
deleted file mode 100644
index fa082304f..000000000
--- a/mdk-stage1/slang/slcurses.h
+++ /dev/null
@@ -1,353 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include <stdio.h>
-
-#ifndef SLANG_VERSION
-# include <slang.h>
-#endif
-
-/* This is a temporary hack until lynx is fixed to not include this file. */
-#ifndef LYCURSES_H
-
-typedef struct
-{
-   unsigned int _begy, _begx, _maxy, _maxx;
-   unsigned int _curx, _cury;
-   unsigned int nrows, ncols;
-   unsigned int scroll_min, scroll_max;
-   SLsmg_Char_Type **lines;
-   SLsmg_Char_Type color;
-   int is_subwin;
-   SLtt_Char_Type attr;
-   int delay_off;
-   int scroll_ok;
-   int modified;
-   int has_box;
-   int use_keypad;
-}
-SLcurses_Window_Type;
-
-extern int SLcurses_wclrtobot (SLcurses_Window_Type *);
-extern int SLcurses_wscrl (SLcurses_Window_Type *, int);
-extern int SLcurses_wrefresh (SLcurses_Window_Type *);
-extern int SLcurses_delwin (SLcurses_Window_Type *);
-extern int SLcurses_wprintw (SLcurses_Window_Type *, char *, ...);
-extern SLcurses_Window_Type *SLcurses_newwin (unsigned int, unsigned int,
-					      unsigned int, unsigned int);
-
-extern SLcurses_Window_Type *SLcurses_subwin (SLcurses_Window_Type *,
-					      unsigned int, unsigned int,
-					      unsigned int, unsigned int);
-
-extern int SLcurses_wnoutrefresh (SLcurses_Window_Type *);
-extern int SLcurses_wclrtoeol (SLcurses_Window_Type *);
-
-extern int SLcurses_wmove (SLcurses_Window_Type *, unsigned int, unsigned int);
-extern int SLcurses_waddch (SLcurses_Window_Type *, SLtt_Char_Type);
-extern int SLcurses_waddnstr (SLcurses_Window_Type *, char *, int);
-
-#define waddnstr		SLcurses_waddnstr
-#define waddch			SLcurses_waddch
-#define waddstr(w,s)		waddnstr((w),(s),-1)
-#define addstr(x)		waddstr(stdscr, (x))
-#define addnstr(s,n)		waddnstr(stdscr,(s),(n))
-#define addch(ch)      		waddch(stdscr,(ch))
-
-#define mvwaddnstr(w,y,x,s,n) \
-  (-1 == wmove((w),(y),(x)) ? -1 : waddnstr((w),(s),(n)))
-#define mvwaddstr(w,y,x,s) \
-  (-1 == wmove((w),(y),(x)) ? -1 : waddnstr((w),(s), -1))
-#define mvaddnstr(y,x,s,n)	mvwaddnstr(stdscr,(y),(x),(s),(n))
-#define mvaddstr(y,x,s)       	mvwaddstr(stdscr,(y),(x),(s))
-#define mvwaddch(w,y,x,c) \
-  ((-1 == wmove((w),(y),(x))) ? -1 : waddch((w),(c)))
-#define mvaddch(y,x,c)         	mvwaddch(stdscr,(y),(x),(c))
-
-extern int SLcurses_wclear (SLcurses_Window_Type *w);
-extern int SLcurses_printw (char *, ...);
-
-#if 0
-/* Why are these functions part of curses??? */
-extern int SLcurses_mvwscanw (SLcurses_Window_Type *, unsigned int, unsigned int,
-			      char *, ...);
-extern int SLcurses_wscanw (SLcurses_Window_Type *, char *, ...);
-extern int SLcurses_scanw (char *, ...);
-#define mvwscanw SLcurses_mvwscanw
-#define wscanw SLcurses_wscanw
-#define scanw SLcurses_scanw
-#endif
-
-extern SLcurses_Window_Type *SLcurses_Stdscr;
-#define WINDOW SLcurses_Window_Type
-#define stdscr SLcurses_Stdscr
-
-#define subwin		SLcurses_subwin
-#define wclrtobot	SLcurses_wclrtobot
-#define wscrl		SLcurses_wscrl
-#define scrl(n)		wscrl(stdscr,(n))
-#define scroll(w)	wscrl((w),1)
-#define wrefresh	SLcurses_wrefresh
-#define delwin		SLcurses_delwin
-#define wmove		SLcurses_wmove
-#define newwin		SLcurses_newwin
-#define wnoutrefresh	SLcurses_wnoutrefresh
-#define werase(w)	SLcurses_wmove((w),0,0); SLcurses_wclrtobot(w)
-#define wclear(w)	SLcurses_wmove((w),0,0); SLcurses_wclrtobot(w)
-#define wprintw		SLcurses_wprintw
-#define mvwprintw	SLcurses_mvwprintw
-
-#define winch(w) \
-    ((((w)->_cury < (w)->nrows) && ((w)->_curx < (w)->ncols)) \
-       ? ((w)->lines[(w)->_cury][(w)->_curx]) : 0)
-
-#define inch() winch(stdscr)
-#define mvwinch(w,x,y) \
-    ((-1 != wmove((w),(x),(y))) ? winch(w) : (-1))
-#define doupdate SLsmg_refresh
-
-#define mvwin(w,a,b) ((w)->_begy = (a), (w)->_begx = (b))
-
-extern int SLcurses_mvprintw (int, int, char *, ...);
-extern int SLcurses_mvwprintw (SLcurses_Window_Type *, int, int, char *, ...);
-extern int SLcurses_has_colors(void);
-extern int SLcurses_nil (void);
-extern int SLcurses_wgetch (SLcurses_Window_Type *);
-extern int SLcurses_getch (void);
-
-extern int SLcurses_wattrset (SLcurses_Window_Type *, SLtt_Char_Type);
-extern int SLcurses_wattron (SLcurses_Window_Type *, SLtt_Char_Type);
-extern int SLcurses_wattroff (SLcurses_Window_Type *, SLtt_Char_Type);
-#define attrset(x) SLcurses_wattrset(stdscr, (x))
-#define attron(x) SLcurses_wattron(stdscr, (x))
-#define attroff(x) SLcurses_wattroff(stdscr, (x))
-#define wattrset(w, x) SLcurses_wattrset((w), (x))
-#define wattron(w, x) SLcurses_wattron((w), (x))
-#define wattroff(w, x) SLcurses_wattroff((w), (x))
-#define wattr_get(w) ((w)->color << 8)
-#define attr_get() wattr_get(stdscr)
-
-#define COLOR_PAIR(x) ((x) << 8)
-
-extern int SLcurses_start_color (void);
-#define start_color SLcurses_start_color
-
-#define ERR 0xFFFF
-#define wgetch SLcurses_wgetch
-#define getch SLcurses_getch
-
-extern int SLcurses_nodelay (SLcurses_Window_Type *, int);
-extern SLcurses_Window_Type *SLcurses_initscr (void);
-#define initscr SLcurses_initscr
-
-extern int SLcurses_cbreak (void);
-extern int SLcurses_raw (void);
-#define cbreak SLcurses_cbreak
-#define crmode SLcurses_cbreak
-#define raw SLcurses_raw
-#define noraw SLang_reset_tty
-#define nocbreak SLang_reset_tty
-
-#define mvprintw SLcurses_mvprintw
-#define has_colors SLcurses_has_colors
-#define nodelay SLcurses_nodelay
-
-#define ungetch SLang_ungetkey
-
-#define COLS SLtt_Screen_Cols
-#define LINES SLtt_Screen_Rows
-
-#define move(x,y) SLcurses_wmove(stdscr, (x), (y))
-#define wclrtoeol SLcurses_wclrtoeol
-#define clrtoeol() SLcurses_wclrtoeol(stdscr)
-#define clrtobot() SLcurses_wclrtobot(stdscr)
-
-#define printw SLcurses_printw
-#define mvprintw SLcurses_mvprintw
-#define wstandout(w) SLcurses_wattrset((w),A_STANDOUT)
-#define wstandend(w) SLcurses_wattrset((w),A_NORMAL)
-#define standout() SLcurses_wattrset(stdscr,A_STANDOUT)
-#define standend() SLcurses_wattrset(stdscr,A_NORMAL)
-
-#define refresh() SLcurses_wrefresh(stdscr)
-#define clear() SLcurses_wclear(stdscr)
-#define erase() werase(stdscr)
-#define touchline SLsmg_touch_lines
-#define resetterm SLang_reset_tty
-
-extern int SLcurses_endwin (void);
-#define endwin SLcurses_endwin
-extern int SLcurses_Is_Endwin;
-#define isendwin() SLcurses_Is_Endwin
-
-#define keypad(w,x) ((w)->use_keypad = (x))
-
-#define KEY_MIN		SL_KEY_UP
-#define KEY_DOWN	SL_KEY_DOWN
-#define KEY_UP		SL_KEY_UP
-#define KEY_LEFT	SL_KEY_LEFT
-#define KEY_RIGHT	SL_KEY_RIGHT
-#define KEY_A1		SL_KEY_A1
-#define KEY_B1		SL_KEY_B1
-#define KEY_C1		SL_KEY_C1
-#define KEY_A2		SL_KEY_A2
-#define KEY_B2		SL_KEY_B2
-#define KEY_C2		SL_KEY_C2
-#define KEY_A3		SL_KEY_A3
-#define KEY_B3		SL_KEY_B3
-#define KEY_C3		SL_KEY_C3
-#define KEY_REDO	SL_KEY_REDO
-#define KEY_UNDO	SL_KEY_UNDO
-#define KEY_BACKSPACE	SL_KEY_BACKSPACE
-#define KEY_PPAGE	SL_KEY_PPAGE
-#define KEY_NPAGE	SL_KEY_NPAGE
-#define KEY_HOME	SL_KEY_HOME
-#define KEY_END		SL_KEY_END
-#define KEY_F0		SL_KEY_F0
-#define KEY_F		SL_KEY_F
-#define KEY_ENTER	SL_KEY_ENTER
-#define KEY_MAX		0xFFFF
-
-/* Ugly Hacks that may not work */
-#define flushinp SLcurses_nil
-#define winsertln(w) \
-  ((w)->scroll_min=(w)->_cury, \
-   (w)->scroll_max=(w)->nrows, \
-   wscrl((w), -1))
-
-extern SLtt_Char_Type SLcurses_Acs_Map [128];
-#define acs_map SLcurses_Acs_Map
-
-#define ACS_ULCORNER (acs_map[SLSMG_ULCORN_CHAR])
-#define ACS_URCORNER (acs_map[SLSMG_URCORN_CHAR])
-#define ACS_LRCORNER (acs_map[SLSMG_LRCORN_CHAR])
-#define ACS_LLCORNER (acs_map[SLSMG_LLCORN_CHAR])
-#define ACS_TTEE (acs_map[SLSMG_UTEE_CHAR])
-#define ACS_LTEE (acs_map[SLSMG_LTEE_CHAR])
-#define ACS_RTEE (acs_map[SLSMG_RTEE_CHAR])
-#define ACS_BTEE (acs_map[SLSMG_DTEE_CHAR])
-#define ACS_PLUS (acs_map[SLSMG_PLUS_CHAR])
-#define ACS_VLINE (acs_map[SLSMG_VLINE_CHAR])
-#define ACS_HLINE (acs_map[SLSMG_HLINE_CHAR])
-#define ACS_S1		'-'
-#define ACS_S9		'-'
-#define ACS_DIAMOND		'&'
-#define ACS_CKBOARD		(acs_map[SLSMG_CKBRD_CHAR])
-#define ACS_DEGREE		'o'
-#define ACS_PLMINUS		'+'
-#define ACS_BULLET		'*'
-#define ACS_LARROW		'<'
-#define ACS_RARROW		'>'
-#define ACS_DARROW		'v'
-#define ACS_UARROW		'^'
-#define ACS_BOARD		'#'
-#define ACS_LANTERN		'#'
-#define ACS_BLOCK		'#'
-
-#if 1
-#define hline(x,y) SLcurses_nil ()
-#define vline(x,y) SLcurses_nil ()
-#endif
-
-#define A_CHARTEXT	0x00FF
-#define A_NORMAL 0
-#define A_BOLD		0x1000
-#define A_REVERSE	0x2000
-#define A_STANDOUT	A_REVERSE
-#define A_UNDERLINE	0x4000
-#define A_BLINK		0
-#define A_COLOR		0x0700
-#define A_ALTCHARSET	0x8000
-#define A_DIM		0
-#define A_PROTECT	0
-#define A_INVIS		0
-
-#define COLOR_BLACK	SLSMG_COLOR_BLACK
-#define COLOR_RED	SLSMG_COLOR_RED
-#define COLOR_GREEN	SLSMG_COLOR_GREEN
-#define COLOR_YELLOW	SLSMG_COLOR_BROWN
-#define COLOR_BLUE	SLSMG_COLOR_BLUE
-#define COLOR_MAGENTA	SLSMG_COLOR_MAGENTA
-#define COLOR_CYAN	SLSMG_COLOR_CYAN
-#define COLOR_WHITE	SLSMG_COLOR_LGRAY
-
-extern int SLcurses_Num_Colors;
-#define COLORS		SLcurses_Num_Colors
-#define COLOR_PAIRS	(SLcurses_Num_Colors*SLcurses_Num_Colors)
-
-#define init_pair(_x,_f,_b) \
- SLtt_set_color_object((_x), ((_f) == (_b) ? 0x0700 : ((_f) | ((_b) << 8)) << 8))
-
-#define scrollok(a,b) ((a)->scroll_ok = (b))
-#define getyx(a,y,x)  (y=(a)->_cury, x=(a)->_curx)
-#define getmaxyx(a,y,x)  (y=(a)->nrows, x=(a)->ncols)
-#define napms(x) usleep(1000 * (x))
-typedef SLtt_Char_Type chtype;
-#define beep SLtt_beep
-#define curs_set(x) SLtt_set_cursor_visibility(x)
-#define touchwin(x) SLsmg_touch_lines((x)->_begy, (x)->nrows)
-#define flash SLtt_beep
-
-#define wsetscrreg(w,a,b)	((w)->scroll_min = (a), (w)->scroll_max = (b))
-
-#define wtimeout(a,b) (a)->delay_off = ((b >= 0) ? (b) / 100 : -1)
-#define timeout(a) wtimeout(stdscr, a)
-extern int SLcurses_wdelch (SLcurses_Window_Type *);
-#define wdelch SLcurses_wdelch
-#define delch() wdelch(stdscr)
-
-extern int SLcurses_winsch (SLcurses_Window_Type *, int);
-#define winsch SLcurses_winsch
-
-extern int SLcurses_Esc_Delay;/* ESC expire time in milliseconds (ncurses compatible) */
-#define ESCDELAY SLcurses_Esc_Delay
-
-extern int SLcurses_clearok (SLcurses_Window_Type *, int);
-#define clearok SLcurses_clearok
-
-/* Functions that have not been implemented. */
-#define copywin(w,v,a,b,c,d,e,f,g) SLcurses_nil()
-#define wdeleteln(win) SLcurses_nil()
-#define resetty SLcurses_nil
-#define savetty SLcurses_nil
-#define overlay(u,v) SLcurses_nil()
-
-/* These functions do nothing */
-#define savetty SLcurses_nil
-#define nonl    SLcurses_nil
-#define echo SLcurses_nil
-#define noecho SLcurses_nil
-#define saveterm SLcurses_nil
-#define box(w,y,z) ((w)->has_box = 1, (w)->modified = 1)
-#define leaveok(a,b) SLcurses_nil()
-#define nl() SLcurses_nil()
-#define trace(x) SLcurses_nil()
-#define tigetstr(x) NULL
-
-/* These have no place in C */
-#define TRUE 1
-#define FALSE 0
-#define bool int
-
-/* Lynx compatability */
-#else
-
-#define stdscr NULL
-#define COLS SLtt_Screen_Cols
-#define LINES SLtt_Screen_Rows
-#define move SLsmg_gotorc
-#define addstr SLsmg_write_string
-#define clear SLsmg_cls
-#define standout SLsmg_reverse_video
-#define standend  SLsmg_normal_video
-#define clrtoeol SLsmg_erase_eol
-#define scrollok(a,b) SLsmg_Newline_Moves = ((b) ? 1 : -1)
-#define addch SLsmg_write_char
-#define echo()
-#define printw SLsmg_printf
-#define endwin SLsmg_reset_smg(),SLang_reset_tty
-
-#endif
diff --git a/mdk-stage1/slang/sldisply.c b/mdk-stage1/slang/sldisply.c
deleted file mode 100644
index 1e1161774..000000000
--- a/mdk-stage1/slang/sldisply.c
+++ /dev/null
@@ -1,2596 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include <time.h>
-#include <ctype.h>
-
-#if !defined(VMS) || (__VMS_VER >= 70000000)
-# include <sys/time.h>
-# ifdef __QNX__
-#  include <sys/select.h>
-# endif
-# include <sys/types.h>
-#endif
-
-#ifdef __BEOS__
-/* Prototype for select */
-# include <net/socket.h>
-#endif
-
-#ifdef HAVE_TERMIOS_H
-# include <termios.h>
-#endif
-
-#ifdef VMS
-# include <unixlib.h>
-# include <unixio.h>
-# include <dvidef.h>
-# include <descrip.h>
-# include <lib$routines.h>
-# include <starlet.h>
-#else
-# if !defined(sun)
-#  include <sys/ioctl.h>
-# endif
-#endif
-
-#ifdef SYSV
-# include <sys/termio.h>
-# include <sys/stream.h>
-# include <sys/ptem.h>
-# include <sys/tty.h>
-#endif
-
-#if defined (_AIX) && !defined (FD_SET)
-# include <sys/select.h>	/* for FD_ISSET, FD_SET, FD_ZERO */
-#endif
-
-#include <errno.h>
-
-#if defined(__DECC) && defined(VMS)
-/* These get prototypes for write an sleep */
-# include <unixio.h>
-#endif
-#include <signal.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-/* Colors:  These definitions are used for the display.  However, the
- * application only uses object handles which get mapped to this
- * internal representation.  The mapping is performed by the Color_Map
- * structure below. */
-
-#define CHAR_MASK	0x000000FF
-#define FG_MASK		0x0000FF00
-#define BG_MASK		0x00FF0000
-#define ATTR_MASK	0x1F000000
-#define BGALL_MASK	0x0FFF0000
-
-/* The 0x10000000 bit represents the alternate character set.  BGALL_MASK does
- * not include this attribute.
- */
-
-#define GET_FG(color) ((color & FG_MASK) >> 8)
-#define GET_BG(color) ((color & BG_MASK) >> 16)
-#define MAKE_COLOR(fg, bg) (((fg) | ((bg) << 8)) << 8)
-
-int SLtt_Screen_Cols;
-int SLtt_Screen_Rows;
-int SLtt_Term_Cannot_Insert;
-int SLtt_Term_Cannot_Scroll;
-int SLtt_Use_Ansi_Colors;
-int SLtt_Blink_Mode = 1;
-int SLtt_Use_Blink_For_ACS = 0;
-int SLtt_Newline_Ok = 0;
-int SLtt_Has_Alt_Charset = 0;
-int SLtt_Force_Keypad_Init = 0;
-
-void (*_SLtt_color_changed_hook)(void);
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-static int Bce_Color_Offset = 0;
-#endif
-static int Can_Background_Color_Erase = 1;
-
-/* -1 means unknown */
-int SLtt_Has_Status_Line = -1;	       /* hs */
-int SLang_TT_Write_FD = -1;
-
-static int Automatic_Margins;
-/* static int No_Move_In_Standout; */
-static int Worthless_Highlight;
-#define HP_GLITCH_CODE
-#ifdef HP_GLITCH_CODE
-/* This glitch is exclusive to HP term.  Basically it means that to clear
- * attributes, one has to erase to the end of the line.
- */
-static int Has_HP_Glitch;
-#endif
-
-static char *Reset_Color_String;
-static int Is_Color_Terminal = 0;
-
-static int Linux_Console;
-
-/* It is crucial that JMAX_COLORS must be less than 128 since the high bit
- * is used to indicate a character from the ACS (alt char set).  The exception
- * to this rule is if SLtt_Use_Blink_For_ACS is true.  This means that of
- * the highbit is set, we interpret that as a blink character.  This is
- * exploited by DOSemu.
- */
-#define JMAX_COLORS 256
-#define JNORMAL_COLOR 0
-
-typedef struct
-{
-   SLtt_Char_Type fgbg;
-   SLtt_Char_Type mono;
-   char *custom_esc;
-}
-Ansi_Color_Type;
-
-#define RGB1(r, g, b)   ((r) | ((g) << 1) | ((b) << 2))
-#define RGB(r, g, b, br, bg, bb)  ((RGB1(r, g, b) << 8) | (RGB1(br, bg, bb) << 16))
-
-static Ansi_Color_Type Ansi_Color_Map[JMAX_COLORS] =
-{
-     {RGB(1, 1, 1, 0, 0, 0), 0x00000000, NULL},   /* white/black */
-     {RGB(0, 1, 0, 0, 0, 0), SLTT_REV_MASK, NULL},   /* green/black */
-     {RGB(1, 0, 1, 0, 0, 0), SLTT_REV_MASK, NULL},   /* magenta/black */
-     {RGB(0, 1, 1, 0, 0, 0), SLTT_REV_MASK, NULL},   /* cyan/black */
-     {RGB(1, 0, 0, 0, 0, 0), SLTT_REV_MASK, NULL},
-     {RGB(0, 1, 0, 0, 0, 1), SLTT_REV_MASK, NULL},
-     {RGB(1, 0, 0, 0, 0, 1), SLTT_REV_MASK, NULL},
-     {RGB(1, 0, 0, 0, 1, 0), SLTT_REV_MASK, NULL},
-     {RGB(0, 0, 1, 1, 0, 0), SLTT_REV_MASK, NULL},
-     {RGB(0, 1, 0, 1, 0, 0), SLTT_REV_MASK, NULL},
-     {RGB(0, 1, 1, 1, 1, 1), SLTT_REV_MASK, NULL},
-     {RGB(1, 1, 0, 1, 1, 1), SLTT_REV_MASK, NULL},
-     {RGB(1, 0, 1, 1, 1, 1), SLTT_REV_MASK, NULL},
-     {RGB(0, 0, 0, 0, 1, 1), SLTT_REV_MASK, NULL},
-     {RGB(0, 1, 0, 1, 1, 1), SLTT_REV_MASK, NULL},
-     {RGB(0, 1, 0, 1, 1, 1), SLTT_REV_MASK, NULL},
-     {RGB(0, 1, 0, 1, 1, 1), SLTT_REV_MASK, NULL},
-     {RGB(0, 1, 0, 1, 1, 1), SLTT_REV_MASK, NULL}
-};
-
-static char *Color_Fg_Str = "\033[3%dm";
-static char *Color_Bg_Str = "\033[4%dm";
-static char *Default_Color_Fg_Str = "\033[39m";
-static char *Default_Color_Bg_Str = "\033[49m";
-
-static int Max_Terminfo_Colors = 8;	       /* termcap Co */
-
-char *SLtt_Graphics_Char_Pairs;	       /* ac termcap string -- def is vt100 */
-
-/* 1 if terminal lacks the ability to go into insert mode or into delete
-   mode. Currently controlled by S-Lang but later perhaps termcap. */
-
-static char *UnderLine_Vid_Str;
-static char *Blink_Vid_Str;
-static char *Bold_Vid_Str;
-static char *Ins_Mode_Str; /* = "\033[4h"; */   /* ins mode (im) */
-static char *Eins_Mode_Str; /* = "\033[4l"; */  /* end ins mode (ei) */
-static char *Scroll_R_Str; /* = "\033[%d;%dr"; */ /* scroll region */
-static char *Cls_Str; /* = "\033[2J\033[H"; */  /* cl termcap STR  for ansi terminals */
-static char *Rev_Vid_Str; /* = "\033[7m"; */    /* mr,so termcap string */
-static char *Norm_Vid_Str; /* = "\033[m"; */   /* me,se termcap string */
-static char *Del_Eol_Str; /* = "\033[K"; */	       /* ce */
-static char *Del_Bol_Str; /* = "\033[1K"; */	       /* cb */
-static char *Del_Char_Str; /* = "\033[P"; */   /* dc */
-static char *Del_N_Lines_Str; /* = "\033[%dM"; */  /* DL */
-static char *Add_N_Lines_Str; /* = "\033[%dL"; */  /* AL */
-static char *Rev_Scroll_Str;
-static char *Curs_Up_Str;
-static char *Curs_F_Str;    /* RI termcap string */
-static char *Cursor_Visible_Str;    /* ve termcap string */
-static char *Cursor_Invisible_Str;    /* vi termcap string */
-#if 0
-static char *Start_Mouse_Rpt_Str;  /* Start mouse reporting mode */
-static char *End_Mouse_Rpt_Str;  /* End mouse reporting mode */
-#endif
-static char *Start_Alt_Chars_Str;  /* as */
-static char *End_Alt_Chars_Str;   /* ae */
-static char *Enable_Alt_Char_Set;  /* eA */
-
-static char *Term_Init_Str;
-static char *Keypad_Init_Str;
-static char *Term_Reset_Str;
-static char *Keypad_Reset_Str;
-
-/* status line functions */
-static char *Disable_Status_line_Str;  /* ds */
-static char *Return_From_Status_Line_Str;   /* fs */
-static char *Goto_Status_Line_Str;     /* ts */
-static int Num_Status_Line_Columns;    /* ws */
-/* static int Status_Line_Esc_Ok;	 */       /* es */
-
-/* static int Len_Curs_F_Str = 5; */
-
-/* cm string has %i%d since termcap numbers columns from 0 */
-/* char *CURS_POS_STR = "\033[%d;%df";  ansi-- hor and vert pos */
-static char *Curs_Pos_Str; /* = "\033[%i%d;%dH";*/   /* cm termcap string */
-
-/* scrolling region */
-static int Scroll_r1 = 0, Scroll_r2 = 23;
-static int Cursor_r, Cursor_c;	       /* 0 based */
-
-/* current attributes --- initialized to impossible value */
-static SLtt_Char_Type Current_Fgbg = 0xFFFFFFFFU;
-
-static int Cursor_Set;		       /* 1 if cursor position known, 0
-					* if not.  -1 if only row is known
-					*/
-
-#define MAX_OUTPUT_BUFFER_SIZE 4096
-
-static unsigned char Output_Buffer[MAX_OUTPUT_BUFFER_SIZE];
-static unsigned char *Output_Bufferp = Output_Buffer;
-
-unsigned long SLtt_Num_Chars_Output;
-
-int _SLusleep (unsigned long usecs)
-{
-#if !defined(VMS) || (__VMS_VER >= 70000000)
-   struct timeval tv;
-   tv.tv_sec = usecs / 1000000;
-   tv.tv_usec = usecs % 1000000;
-   return select(0, NULL, NULL, NULL, &tv);
-#else
-   return 0;
-#endif
-}
-
-int SLtt_flush_output (void)
-{
-   int nwrite = 0;
-   unsigned int total;
-   int n = (int) (Output_Bufferp - Output_Buffer);
-
-   SLtt_Num_Chars_Output += n;
-
-   total = 0;
-   while (n > 0)
-     {
-	nwrite = write (SLang_TT_Write_FD, (char *) Output_Buffer + total, n);
-	if (nwrite == -1)
-	  {
-	     nwrite = 0;
-#ifdef EAGAIN
-	     if (errno == EAGAIN)
-	       {
-		  _SLusleep (100000);   /* 1/10 sec */
-		  continue;
-	       }
-#endif
-#ifdef EWOULDBLOCK
-	     if (errno == EWOULDBLOCK)
-	       {
-		  _SLusleep (100000);
-		  continue;
-	       }
-#endif
-#ifdef EINTR
-	     if (errno == EINTR) continue;
-#endif
-	     break;
-	  }
-	n -= nwrite;
-	total += nwrite;
-     }
-   Output_Bufferp = Output_Buffer;
-   return n;
-}
-
-int SLtt_Baud_Rate;
-static void tt_write(char *str, unsigned int n)
-{
-   static unsigned long last_time;
-   static int total;
-   unsigned long now;
-   unsigned int ndiff;
-
-   if ((str == NULL) || (n == 0)) return;
-   total += n;
-
-   while (1)
-     {
-	ndiff = MAX_OUTPUT_BUFFER_SIZE - (int) (Output_Bufferp - Output_Buffer);
-	if (ndiff < n)
-	  {
-	     SLMEMCPY ((char *) Output_Bufferp, (char *) str, ndiff);
-	     Output_Bufferp += ndiff;
-	     SLtt_flush_output ();
-	     n -= ndiff;
-	     str += ndiff;
-	  }
-	else
-	  {
-	     SLMEMCPY ((char *) Output_Bufferp, str, n);
-	     Output_Bufferp += n;
-	     break;
-	  }
-     }
-
-   if (((SLtt_Baud_Rate > 150) && (SLtt_Baud_Rate <= 9600))
-       && (10 * total > SLtt_Baud_Rate))
-     {
-	total = 0;
-	if ((now = (unsigned long) time(NULL)) - last_time <= 1)
-	  {
-	     SLtt_flush_output ();
-	     sleep((unsigned) 1);
-	  }
-	last_time = now;
-     }
-}
-
-static void tt_write_string (char *str)
-{
-   if (str != NULL) tt_write(str, strlen(str));
-}
-
-void SLtt_write_string (char *str)
-{
-   tt_write_string (str);
-   Cursor_Set = 0;
-}
-
-void SLtt_putchar (char ch)
-{
-   SLtt_normal_video ();
-   if (Cursor_Set == 1)
-     {
-	if (ch >= ' ') Cursor_c++;
-	else if (ch == '\b') Cursor_c--;
-	else if (ch == '\r') Cursor_c = 0;
-	else Cursor_Set = 0;
-
-	if ((Cursor_c + 1 == SLtt_Screen_Cols)
-	    && Automatic_Margins) Cursor_Set = 0;
-     }
-
-   if (Output_Bufferp < Output_Buffer + MAX_OUTPUT_BUFFER_SIZE)
-     {
-	*Output_Bufferp++ = (unsigned char) ch;
-     }
-   else tt_write (&ch, 1);
-}
-
-static unsigned int tt_sprintf(char *buf, char *fmt, int x, int y)
-{
-   char *fmt_max;
-   register unsigned char *b, ch;
-   int offset;
-   int z, z1, parse_level;
-   int zero_pad;
-   int field_width;
-   int variables [26];
-   int stack [64];
-   unsigned int stack_len;
-   int parms [10];
-#define STACK_POP (stack_len ? stack[--stack_len] : 0)
-
-   if (fmt == NULL)
-     {
-	*buf = 0;
-	return 0;
-     }
-
-   stack [0] = y;	       /* pushed for termcap */
-   stack [1] = x;
-   stack_len = 2;
-
-   parms [1] = x;	       /* p1 */
-   parms [2] = y;	       /* p2 */
-
-   offset = 0;
-   zero_pad = 0;
-   field_width = 0;
-
-   b = (unsigned char *) buf;
-   fmt_max = fmt + strlen (fmt);
-
-   while (fmt < fmt_max)
-     {
-	ch = *fmt++;
-
-	if (ch != '%')
-	  {
-	     *b++ = ch;
-	     continue;
-	  }
-
-	if (fmt == fmt_max) break;
-	ch = *fmt++;
-
-	switch (ch)
-	  {
-	   default:
-	     *b++ = ch;
-	     break;
-
-	   case 'p':
-
-	     if (fmt == fmt_max) break;
-	     ch = *fmt++;
-	     if ((ch >= '0') && (ch <= '9'))
-	       stack [stack_len++] = parms [ch - '0'];
-	     break;
-
-	   case '\'':   /* 'x' */
-	     if (fmt == fmt_max) break;
-	     stack [stack_len++] = *fmt++;
-	     if (fmt < fmt_max) fmt++;     /* skip ' */
-	     break;
-
-	   case '{':	       /* literal constant, e.g. {30} */
-	     z = 0;
-	     while ((fmt < fmt_max) && ((ch = *fmt) <= '9') && (ch >= '0'))
-	       {
-		  z = z * 10 + (ch - '0');
-		  fmt++;
-	       }
-	     stack [stack_len++] = z;
-	     if ((ch == '}') && (fmt < fmt_max)) fmt++;
-	     break;
-
-	   case '0':
-	     if (fmt == fmt_max) break;
-	     ch = *fmt;
-	     if ((ch != '2') && (ch != '3'))
-	       break;
-	     zero_pad = 1;
-	     fmt++;
-	     /* drop */
-
-	   case '2':
-	   case '3':
-	     if (fmt == fmt_max)
-	     if (*fmt == 'x')
-	       {
-		  char x_fmt_buf [4];
-		  char *x_fmt_buf_ptr;
-
-		  x_fmt_buf_ptr = x_fmt_buf;
-		  if (zero_pad) *x_fmt_buf_ptr++ = '0';
-		  *x_fmt_buf_ptr++ = ch;
-		  *x_fmt_buf_ptr++ = 'X';
-		  *x_fmt_buf_ptr = 0;
-
-		  z = STACK_POP;
-		  z += offset;
-
-		  sprintf ((char *)b, x_fmt_buf, z);
-		  b += strlen ((char *)b);
-		  zero_pad = 0;
-		  break;
-	       }
-
-	     field_width = (ch - '0');
-		  /* drop */
-
-	   case 'd':
-	     z = STACK_POP;
-	     z += offset;
-	     if (z >= 100)
-	       {
-		  *b++ = z / 100 + '0';
-		  z = z % 100;
-		  zero_pad = 1;
-		  field_width = 2;
-	       }
-	     else if (zero_pad && (field_width == 3))
-	       *b++ = '0';
-
-	     if (z >= 10)
-	       {
-		  *b++ = z / 10 + '0';
-		  z = z % 10;
-	       }
-	     else if (zero_pad && (field_width >= 2))
-	       *b++ = '0';
-
-	     *b++ = z + '0';
-	     field_width = zero_pad = 0;
-	     break;
-
-	   case 'x':
-	     z = STACK_POP;
-	     z += offset;
-	     sprintf ((char *) b, "%X", z);
-	     b += strlen ((char *)b);
-	     break;
-
-	   case 'i':
-	     offset = 1;
-	     break;
-
-	   case '+':
-	     /* Handling this depends upon whether or not we are parsing
-	      * terminfo.  Terminfo requires the stack so use it as an
-	      * indicator.
-	      */
-	     if (stack_len > 2)
-	       {
-		  z = STACK_POP;
-		  stack [stack_len - 1] += z;
-	       }
-	     else if (fmt < fmt_max)
-	       {
-		  ch = *fmt++;
-		  if ((unsigned char) ch == 128) ch = 0;
-		  ch = ch + (unsigned char) STACK_POP;
-		  if (ch == '\n') ch++;
-		  *b++ = ch;
-	       }
-	     break;
-
-	     /* Binary operators */
-	   case '-':
-	   case '*':
-	   case '/':
-	   case 'm':
-	   case '&':
-	   case '|':
-	   case '^':
-	   case '=':
-	   case '>':
-	   case '<':
-	   case 'A':
-	   case 'O':
-	     z1 = STACK_POP;
-	     z = STACK_POP;
-	     switch (ch)
-	       {
-		case '-': z = (z - z1); break;
-		case '*': z = (z * z1); break;
-		case '/': z = (z / z1); break;
-		case 'm': z = (z % z1); break;
-		case '&': z = (z & z1); break;
-		case '|': z = (z | z1); break;
-		case '^': z = (z ^ z1); break;
-		case '=': z = (z == z1); break;
-		case '>': z = (z > z1); break;
-		case '<': z = (z < z1); break;
-		case 'A': z = (z && z1); break;
-		case 'O': z = (z || z1); break;
-	       }
-	     stack [stack_len++] = z;
-	     break;
-
-	     /* unary */
-	   case '!':
-	     z = STACK_POP;
-	     stack [stack_len++] = !z;
-	     break;
-
-	   case '~':
-	     z = STACK_POP;
-	     stack [stack_len++] = ~z;
-	     break;
-
-	   case 'r':		       /* termcap -- swap parameters */
-	     z = stack [0];
-	     stack [0] = stack [1];
-	     stack [1] = z;
-	     break;
-
-	   case '.':		       /* termcap */
-	   case 'c':
-	     ch = (unsigned char) STACK_POP;
-	     if (ch == '\n') ch++;
-	     *b++ = ch;
-	     break;
-
-	   case 'g':
-	     if (fmt == fmt_max) break;
-	     ch = *fmt++;
-	     if ((ch >= 'a') && (ch <= 'z'))
-	       stack [stack_len++] = variables [ch - 'a'];
-	     break;
-
-	   case 'P':
-	     if (fmt == fmt_max) break;
-	     ch = *fmt++;
-	     if ((ch >= 'a') && (ch <= 'z'))
-	       variables [ch - 'a'] = STACK_POP;
-	     break;
-
-	     /* If then else parsing.  Actually, this is rather easy.  The
-	      * key is to notice that 'then' does all the work.  'if' simply
-	      * there to indicate the start of a test and endif indicates
-	      * the end of tests.  If 'else' is seen, then skip to
-	      * endif.
-	      */
-	   case '?':		       /* if */
-	   case ';':		       /* endif */
-	     break;
-
-	   case 't':		       /* then */
-	     z = STACK_POP;
-	     if (z != 0)
-	       break;		       /* good.  Continue parsing. */
-
-	     /* z == 0 and test has failed.  So, skip past this entire if
-	      * expression to the matching else or matching endif.
-	      */
-	     /* drop */
-	   case 'e':		       /* else */
-
-	     parse_level = 0;
-	     while (fmt < fmt_max)
-	       {
-		  unsigned char ch1;
-
-		  ch1 = *fmt++;
-		  if ((ch1 != '%') || (fmt == fmt_max))
-		    continue;
-
-		  ch1 = *fmt++;
-
-		  if (ch1 == '?') parse_level++;   /* new if */
-		  else if (ch1 == 'e')
-		    {
-		       if ((ch != 'e') && (parse_level == 0))
-			 break;
-		    }
-		  else if (ch1 == ';')
-		    {
-		       if (parse_level == 0)
-			 break;
-		       parse_level--;
-		    }
-	       }
-	     break;
-	  }
-     }
-   *b = 0;
-   return (unsigned int) (b - (unsigned char *) buf);
-}
-
-static void tt_printf(char *fmt, int x, int y)
-{
-   char buf[1024];
-   unsigned int n;
-   if (fmt == NULL) return;
-   n = tt_sprintf(buf, fmt, x, y);
-   tt_write(buf, n);
-}
-
-void SLtt_set_scroll_region (int r1, int r2)
-{
-   Scroll_r1 = r1;
-   Scroll_r2 = r2;
-   tt_printf (Scroll_R_Str, Scroll_r1, Scroll_r2);
-   Cursor_Set = 0;
-}
-
-void SLtt_reset_scroll_region (void)
-{
-   SLtt_set_scroll_region(0, SLtt_Screen_Rows - 1);
-}
-
-int SLtt_set_cursor_visibility (int show)
-{
-   if ((Cursor_Visible_Str == NULL) || (Cursor_Invisible_Str == NULL))
-     return -1;
-
-   tt_write_string (show ? Cursor_Visible_Str : Cursor_Invisible_Str);
-   return 0;
-}
-
-/* the goto_rc function moves to row relative to scrolling region */
-void SLtt_goto_rc(int r, int c)
-{
-   char *s = NULL;
-   int n;
-   char buf[6];
-
-   if ((c < 0) || (r < 0))
-     {
-	Cursor_Set = 0;
-	return;
-     }
-
-   /* if (No_Move_In_Standout && Current_Fgbg) SLtt_normal_video (); */
-   r += Scroll_r1;
-
-   if ((Cursor_Set > 0) || ((Cursor_Set < 0) && !Automatic_Margins))
-     {
-	n = r - Cursor_r;
-	if ((n == -1) && (Cursor_Set > 0) && (Cursor_c == c)
-	    && (Curs_Up_Str != NULL))
-	  {
-	     s = Curs_Up_Str;
-	  }
-	else if ((n >= 0) && (n <= 4))
-	  {
-	     if ((n == 0) && (Cursor_Set == 1)
-		 && ((c > 1) || (c == Cursor_c)))
-	       {
-		  if (Cursor_c == c) return;
-		  if (Cursor_c == c + 1)
-		    {
-		       s = buf;
-		       *s++ = '\b'; *s = 0;
-		       s = buf;
-		    }
-	       }
-	     else if (c == 0)
-	       {
-		  s = buf;
-		  if ((Cursor_Set != 1) || (Cursor_c != 0)) *s++ = '\r';
-		  while (n--) *s++ = '\n';
-#ifdef VMS
-		  /* Need to add this after \n to start a new record.  Sheesh. */
-		  *s++ = '\r';
-#endif
-		  *s = 0;
-		  s = buf;
-	       }
-	     /* Will fail on VMS */
-#ifndef VMS
-	     else if (SLtt_Newline_Ok && (Cursor_Set == 1) &&
-		      (Cursor_c >= c) && (c + 3 > Cursor_c))
-	       {
-		  s = buf;
-		  while (n--) *s++ = '\n';
-		  n = Cursor_c - c;
-		  while (n--) *s++ = '\b';
-		  *s = 0;
-		  s = buf;
-	       }
-#endif
-	  }
-     }
-   if (s != NULL) tt_write_string(s);
-   else tt_printf(Curs_Pos_Str, r, c);
-   Cursor_c = c; Cursor_r = r;
-   Cursor_Set = 1;
-}
-
-void SLtt_begin_insert (void)
-{
-   tt_write_string(Ins_Mode_Str);
-}
-
-void SLtt_end_insert (void)
-{
-   tt_write_string(Eins_Mode_Str);
-}
-
-void SLtt_delete_char (void)
-{
-   SLtt_normal_video ();
-   tt_write_string(Del_Char_Str);
-}
-
-void SLtt_erase_line (void)
-{
-   tt_write_string("\r");
-   Cursor_Set = 1; Cursor_c = 0;
-   SLtt_del_eol();
-}
-
-/* It appears that the Linux console, and most likely others do not
- * like scrolling regions that consist of one line.  So I have to
- * resort to this stupidity to make up for that stupidity.
- */
-static void delete_line_in_scroll_region (void)
-{
-   SLtt_goto_rc (Cursor_r - Scroll_r1, 0);
-   SLtt_del_eol ();
-}
-
-void SLtt_delete_nlines (int n)
-{
-   int r1, curs;
-   char buf[132];
-
-   if (n <= 0) return;
-   SLtt_normal_video ();
-
-   if (Scroll_r1 == Scroll_r2)
-     {
-	delete_line_in_scroll_region ();
-	return;
-     }
-
-   if (Del_N_Lines_Str != NULL) tt_printf(Del_N_Lines_Str,n, 0);
-   else
-   /* get a new terminal */
-     {
-	r1 = Scroll_r1;
-	curs = Cursor_r;
-	SLtt_set_scroll_region(curs, Scroll_r2);
-	SLtt_goto_rc(Scroll_r2 - Scroll_r1, 0);
-	SLMEMSET(buf, '\n', (unsigned int) n);
-	tt_write(buf, (unsigned int) n);
-	/* while (n--) tt_putchar('\n'); */
-	SLtt_set_scroll_region(r1, Scroll_r2);
-	SLtt_goto_rc(curs, 0);
-     }
-}
-
-void SLtt_cls (void)
-{
-   /* If the terminal is a color terminal but the user wants black and 
-    * white, then make sure that the colors are reset.  This appears to be
-    * necessary.
-    */
-   if ((SLtt_Use_Ansi_Colors == 0) && Is_Color_Terminal)
-     {
-	if (Reset_Color_String != NULL)
-	  tt_write_string (Reset_Color_String);
-	else
-	  tt_write_string ("\033[0m\033[m");
-     }
-
-   SLtt_normal_video();
-   SLtt_reset_scroll_region ();
-   tt_write_string(Cls_Str);
-}
-
-void SLtt_reverse_index (int n)
-{
-   if (!n) return;
-
-   SLtt_normal_video();
-
-   if (Scroll_r1 == Scroll_r2)
-     {
-	delete_line_in_scroll_region ();
-	return;
-     }
-
-   if (Add_N_Lines_Str != NULL) tt_printf(Add_N_Lines_Str,n, 0);
-   else
-     {
-	while(n--) tt_write_string(Rev_Scroll_Str);
-     }
-}
-
-int SLtt_Ignore_Beep = 1;
-static char *Visible_Bell_Str;
-
-void SLtt_beep (void)
-{
-   if (SLtt_Ignore_Beep & 0x1) SLtt_putchar('\007');
-
-   if (SLtt_Ignore_Beep & 0x2)
-     {
-	if (Visible_Bell_Str != NULL) tt_write_string (Visible_Bell_Str);
-#ifdef __linux__
-	else if (Linux_Console)
-	  {
-	     tt_write_string ("\033[?5h");
-	     SLtt_flush_output ();
-	     _SLusleep (50000);
-	     tt_write_string ("\033[?5l");
-	  }
-#endif
-     }
-   SLtt_flush_output ();
-}
-
-static void del_eol (void)
-{
-   int c;
-
-   if (Del_Eol_Str != NULL)
-     {
-	tt_write_string(Del_Eol_Str);
-	return;
-     }
-
-   c = Cursor_c;
-   /* Avoid writing to the lower right corner.  If the terminal does not
-    * have Del_Eol_Str, then it probably does not have what it takes to play
-    * games with insert for for a space into that corner.
-    */
-   if (Cursor_r + 1 < SLtt_Screen_Rows)
-     c++;
-
-   while (c < SLtt_Screen_Cols)
-     {
-	tt_write (" ", 1);
-	c++;
-     }
-}
-
-void SLtt_del_eol (void)
-{
-   if (Current_Fgbg != 0xFFFFFFFFU) SLtt_normal_video ();
-   del_eol ();
-}
-
-typedef struct
-{
-   char *name;
-   SLtt_Char_Type color;
-}
-Color_Def_Type;
-
-#define MAX_COLOR_NAMES 17
-static Color_Def_Type Color_Defs [MAX_COLOR_NAMES] =
-{
-     {"black",		SLSMG_COLOR_BLACK},
-     {"red",		SLSMG_COLOR_RED},
-     {"green",		SLSMG_COLOR_GREEN},
-     {"brown",		SLSMG_COLOR_BROWN},
-     {"blue",		SLSMG_COLOR_BLUE},
-     {"magenta",	SLSMG_COLOR_MAGENTA},
-     {"cyan",		SLSMG_COLOR_CYAN},
-     {"lightgray",	SLSMG_COLOR_LGRAY},
-     {"gray",		SLSMG_COLOR_GRAY},
-     {"brightred",	SLSMG_COLOR_BRIGHT_RED},
-     {"brightgreen",	SLSMG_COLOR_BRIGHT_GREEN},
-     {"yellow",		SLSMG_COLOR_BRIGHT_BROWN},
-     {"brightblue",	SLSMG_COLOR_BRIGHT_BLUE},
-     {"brightmagenta",	SLSMG_COLOR_BRIGHT_CYAN},
-     {"brightcyan",	SLSMG_COLOR_BRIGHT_MAGENTA},
-     {"white",		SLSMG_COLOR_BRIGHT_WHITE},
-#define SLSMG_COLOR_DEFAULT 0xFF
-     {"default",		SLSMG_COLOR_DEFAULT}
-};
-
-void SLtt_set_mono (int obj, char *what, SLtt_Char_Type mask)
-{
-   (void) what;
-   if ((obj < 0) || (obj >= JMAX_COLORS))
-     {
-	return;
-     }
-   Ansi_Color_Map[obj].mono = mask & ATTR_MASK;
-}
-
-static char *check_color_for_digit_form (char *color)
-{
-   unsigned int i, ich;
-   char *s = color;
-
-   i = 0;
-   while ((ich = (int) *s) != 0)
-     {
-	if ((ich < '0') || (ich > '9'))
-	  return color;
-
-	i = i * 10 + (ich - '0');
-	s++;
-     }
-
-   if (i < MAX_COLOR_NAMES)
-     color = Color_Defs[i].name;
-
-   return color;
-}
-
-static int get_default_colors (char **fgp, char **bgp)
-{
-   static char fg_buf[16], bg_buf[16], *bg, *fg;
-   static int already_parsed;
-   char *p, *pmax;
-
-   if (already_parsed == -1)
-     return -1;
-
-   if (already_parsed)
-     {
-	*fgp = fg;
-	*bgp = bg;
-	return 0;
-     }
-
-   already_parsed = -1;
-
-   bg = getenv ("COLORFGBG");
-
-   if (bg == NULL)
-     {
-	bg = getenv ("DEFAULT_COLORS");
-	if (bg == NULL)
-	  return -1;
-     }
-
-   p = fg_buf;
-   pmax = p + (sizeof (fg_buf) - 1);
-
-   while ((*bg != 0) && (*bg != ';'))
-     {
-	if (p < pmax) *p++ = *bg;
-	bg++;
-     }
-   *p = 0;
-
-   if (*bg) bg++;
-
-   p = bg_buf;
-   pmax = p + (sizeof (bg_buf) - 1);
-
-   /* Mark suggested allowing for extra spplication specific stuff following
-    * the background color.  That is what the check for the semi-colon is for.
-    */
-   while ((*bg != 0) && (*bg != ';'))
-     {
-	if (p < pmax) *p++ = *bg;
-	bg++;
-     }
-   *p = 0;
-
-   if (!strcmp (fg_buf, "default") || !strcmp(bg_buf, "default"))
-     {
-	*fgp = *bgp = fg = bg = "default";
-     }
-   else
-     {
-	*fgp = fg = check_color_for_digit_form (fg_buf);
-	*bgp = bg = check_color_for_digit_form (bg_buf);
-     }
-   already_parsed = 1;
-   return 0;
-}
-
-static unsigned char FgBg_Stats[JMAX_COLORS];
-
-static int Color_0_Modified = 0;
-
-void SLtt_set_color_object (int obj, SLtt_Char_Type attr)
-{
-   char *cust_esc;
-
-   if ((obj < 0) || (obj >= JMAX_COLORS)) return;
-
-   cust_esc = Ansi_Color_Map[obj].custom_esc;
-   if (cust_esc != NULL)
-     {
-	SLfree (cust_esc);
-	FgBg_Stats[(Ansi_Color_Map[obj].fgbg >> 8) & 0x7F] -= 1;
-	Ansi_Color_Map[obj].custom_esc = NULL;
-     }
-
-   Ansi_Color_Map[obj].fgbg = attr;
-   if (obj == 0) Color_0_Modified = 1;
-
-   if (_SLtt_color_changed_hook != NULL)
-     (*_SLtt_color_changed_hook)();
-}
-
-SLtt_Char_Type SLtt_get_color_object (int obj)
-{
-   if ((obj < 0) || (obj >= JMAX_COLORS)) return 0;
-   return Ansi_Color_Map[obj].fgbg;
-}
-
-void SLtt_add_color_attribute (int obj, SLtt_Char_Type attr)
-{
-   if ((obj < 0) || (obj >= JMAX_COLORS)) return;
-
-   Ansi_Color_Map[obj].fgbg |= (attr & ATTR_MASK);
-   if (obj == 0) Color_0_Modified = 1;
-   if (_SLtt_color_changed_hook != NULL)
-     (*_SLtt_color_changed_hook)();
-}
-
-static SLtt_Char_Type fb_to_fgbg (SLtt_Char_Type f, SLtt_Char_Type b)
-{
-   SLtt_Char_Type attr;
-
-   if (Max_Terminfo_Colors != 8)
-     {
-	if (f != SLSMG_COLOR_DEFAULT) f %= Max_Terminfo_Colors;
-	if (b != SLSMG_COLOR_DEFAULT) b %= Max_Terminfo_Colors;
-	return ((f << 8) | (b << 16));
-     }
-
-   /* Otherwise we have 8 ansi colors.  Try to get bright versions
-    * by using the BOLD and BLINK attributes.
-    */
-
-   attr = 0;
-
-   /* Note:  If f represents default, it will have the value 0xFF */
-   if (f != SLSMG_COLOR_DEFAULT)
-     {
-	if (f & 0x8) attr = SLTT_BOLD_MASK;
-	f &= 0x7;
-     }
-
-   if (b != SLSMG_COLOR_DEFAULT)
-     {
-	if (b & 0x8) attr |= SLTT_BLINK_MASK;
-	b &= 0x7;
-     }
-
-   return ((f << 8) | (b << 16) | attr);
-}
-
-/* This looks for colors with name form 'colorN'.  If color is of this
- * form, N is passed back via paramter list.
- */
-static int parse_color_digit_name (char *color, SLtt_Char_Type *f)
-{
-   unsigned int i;
-   unsigned char ch;
-
-   if (strncmp (color, "color", 5))
-     return -1;
-
-   color += 5;
-   if (*color == 0)
-     return -1;
-
-   i = 0;
-   while (1)
-     {
-	ch = (unsigned char) *color++;
-	if (ch == 0)
-	  break;
-	if ((ch > '9') || (ch < '0'))
-	  return -1;
-	i = 10 * i + (ch - '0');
-     }
-
-   *f = (SLtt_Char_Type) i;
-   return 0;
-}
-
-static int make_color_fgbg (char *fg, char *bg, SLtt_Char_Type *fgbg)
-{
-   SLtt_Char_Type f = 0xFFFFFFFFU, b = 0xFFFFFFFFU;
-   char *dfg, *dbg;
-   unsigned int i;
-
-   if ((fg != NULL) && (*fg == 0)) fg = NULL;
-   if ((bg != NULL) && (*bg == 0)) bg = NULL;
-
-   if ((fg == NULL) || (bg == NULL))
-     {
-	if (-1 == get_default_colors (&dfg, &dbg))
-	  return -1;
-
-	if (fg == NULL) fg = dfg;
-	if (bg == NULL) bg = dbg;
-     }
-
-   if (-1 == parse_color_digit_name (fg, &f))
-     {
-	for (i = 0; i < MAX_COLOR_NAMES; i++)
-	  {
-	     if (strcmp(fg, Color_Defs[i].name)) continue;
-	     f = Color_Defs[i].color;
-	     break;
-	  }
-     }
-
-   if (-1 == parse_color_digit_name (bg, &b))
-     {
-	for (i = 0; i < MAX_COLOR_NAMES; i++)
-	  {
-	     if (strcmp(bg, Color_Defs[i].name)) continue;
-	     b = Color_Defs[i].color;
-	     break;
-	  }
-     }
-
-   if ((f == 0xFFFFFFFFU) || (b == 0xFFFFFFFFU))
-     return -1;
-
-   *fgbg = fb_to_fgbg (f, b);
-   return 0;
-}
-
-void SLtt_set_color (int obj, char *what, char *fg, char *bg)
-{
-   SLtt_Char_Type fgbg;
-
-   (void) what;
-   if ((obj < 0) || (obj >= JMAX_COLORS))
-     return;
-
-   if (-1 != make_color_fgbg (fg, bg, &fgbg))
-     SLtt_set_color_object (obj, fgbg);
-}
-
-void SLtt_set_color_fgbg (int obj, SLtt_Char_Type f, SLtt_Char_Type b)
-{
-   SLtt_set_color_object (obj, fb_to_fgbg (f, b));
-}
-
-void SLtt_set_color_esc (int obj, char *esc)
-{
-   char *cust_esc;
-   SLtt_Char_Type fgbg = 0;
-   int i;
-
-   if ((obj < 0) || (obj >= JMAX_COLORS))
-     {
-	return;
-     }
-
-   cust_esc = Ansi_Color_Map[obj].custom_esc;
-   if (cust_esc != NULL)
-     {
-	SLfree (cust_esc);
-	FgBg_Stats[(Ansi_Color_Map[obj].fgbg >> 8) & 0x7F] -= 1;
-     }
-
-   cust_esc = (char *) SLmalloc (strlen(esc) + 1);
-   if (cust_esc != NULL) strcpy (cust_esc, esc);
-
-   Ansi_Color_Map[obj].custom_esc = cust_esc;
-   if (cust_esc == NULL) fgbg = 0;
-   else
-     {
-	/* The whole point of this is to generate a unique fgbg */
-	for (i = 0; i < JMAX_COLORS; i++)
-	  {
-	     if (FgBg_Stats[i] == 0) fgbg = i;
-
-	     if (obj == i) continue;
-	     if ((Ansi_Color_Map[i].custom_esc) == NULL) continue;
-	     if (!strcmp (Ansi_Color_Map[i].custom_esc, cust_esc))
-	       {
-		  fgbg = (Ansi_Color_Map[i].fgbg >> 8) & 0x7F;
-		  break;
-	       }
-	  }
-	FgBg_Stats[fgbg] += 1;
-     }
-
-   fgbg |= 0x80;
-   Ansi_Color_Map[obj].fgbg = (fgbg | (fgbg << 8)) << 8;
-   if (obj == 0) Color_0_Modified = 1;
-   if (_SLtt_color_changed_hook != NULL)
-     (*_SLtt_color_changed_hook)();
-}
-
-void SLtt_set_alt_char_set (int i)
-{
-   static int last_i;
-   if (SLtt_Has_Alt_Charset == 0) return;
-   if (i == last_i) return;
-   tt_write_string (i ? Start_Alt_Chars_Str : End_Alt_Chars_Str );
-   last_i = i;
-}
-
-static void write_attributes (SLtt_Char_Type fgbg)
-{
-   int bg0, fg0;
-   int unknown_attributes;
-
-   if (Worthless_Highlight) return;
-   if (fgbg == Current_Fgbg) return;
-
-   unknown_attributes = 0;
-
-   /* Before spitting out colors, fix attributes */
-   if ((fgbg & ATTR_MASK) != (Current_Fgbg & ATTR_MASK))
-     {
-	if (Current_Fgbg & ATTR_MASK)
-	  {
-	     tt_write_string(Norm_Vid_Str);
-	     /* In case normal video turns off ALL attributes: */
-	     if (fgbg & SLTT_ALTC_MASK)
-	       Current_Fgbg &= ~SLTT_ALTC_MASK;
-	     SLtt_set_alt_char_set (0);
-	  }
-
-	if ((fgbg & SLTT_ALTC_MASK)
-	    != (Current_Fgbg & SLTT_ALTC_MASK))
-	  {
-	     SLtt_set_alt_char_set ((int) (fgbg & SLTT_ALTC_MASK));
-	  }
-
-	if (fgbg & SLTT_ULINE_MASK) tt_write_string (UnderLine_Vid_Str);
-	if (fgbg & SLTT_BOLD_MASK) SLtt_bold_video ();
-	if (fgbg & SLTT_REV_MASK) tt_write_string (Rev_Vid_Str);
-	if (fgbg & SLTT_BLINK_MASK)
-	  {
-	     /* Someday Linux will have a blink mode that set high intensity
-	      * background.  Lets be prepared.
-	      */
-	     if (SLtt_Blink_Mode) tt_write_string (Blink_Vid_Str);
-	  }
-	unknown_attributes = 1;
-     }
-
-   if (SLtt_Use_Ansi_Colors)
-     {
-	fg0 = (int) GET_FG(fgbg);
-	bg0 = (int) GET_BG(fgbg);
-
-	if (unknown_attributes 
-	    || (fg0 != (int)GET_FG(Current_Fgbg)))
-	  {
-	     if (fg0 == SLSMG_COLOR_DEFAULT)
-	       tt_write_string (Default_Color_Fg_Str);
-	     else
-	       tt_printf (Color_Fg_Str, fg0, 0);
-	  }
-
-	if (unknown_attributes
-	    || (bg0 != (int)GET_BG(Current_Fgbg)))
-	  {
-	     if (bg0 == SLSMG_COLOR_DEFAULT)
-	       tt_write_string (Default_Color_Bg_Str);
-	     else
-	       tt_printf (Color_Bg_Str, bg0, 0);
-	  }
-     }
-
-   Current_Fgbg = fgbg;
-}
-
-static int Video_Initialized;
-
-void SLtt_reverse_video (int color)
-{
-   SLtt_Char_Type fgbg;
-   char *esc;
-
-   if (Worthless_Highlight) return;
-   if ((color < 0) || (color >= JMAX_COLORS)) return;
-
-   if (Video_Initialized == 0)
-     {
-	if (color == JNORMAL_COLOR)
-	  {
-	     tt_write_string (Norm_Vid_Str);
-	  }
-	else tt_write_string (Rev_Vid_Str);
-	Current_Fgbg = 0xFFFFFFFFU;
-	return;
-     }
-
-   if (SLtt_Use_Ansi_Colors)
-     {
-	fgbg = Ansi_Color_Map[color].fgbg;
-	if ((esc = Ansi_Color_Map[color].custom_esc) != NULL)
-	  {
-	     if (fgbg != Current_Fgbg)
-	       {
-		  Current_Fgbg = fgbg;
-		  tt_write_string (esc);
-		  return;
-	       }
-	  }
-     }
-   else fgbg = Ansi_Color_Map[color].mono;
-
-   if (fgbg == Current_Fgbg) return;
-   write_attributes (fgbg);
-}
-
-void SLtt_normal_video (void)
-{
-   SLtt_reverse_video(JNORMAL_COLOR);
-}
-
-void SLtt_narrow_width (void)
-{
-   tt_write_string("\033[?3l");
-}
-
-void SLtt_wide_width (void)
-{
-   tt_write_string("\033[?3h");
-}
-
-/* Highest bit represents the character set. */
-#define COLOR_MASK 0x7F00
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-static int bce_color_eqs (unsigned int a, unsigned int b)
-{
-   a = (a & COLOR_MASK) >> 8;
-   b = (b & COLOR_MASK) >> 8;
-   
-   if (a == b)
-     return 1;
-
-   if (SLtt_Use_Ansi_Colors == 0)
-     return Ansi_Color_Map[a].mono == Ansi_Color_Map[b].mono;
-   
-   if (Bce_Color_Offset == 0)
-     return Ansi_Color_Map[a].fgbg == Ansi_Color_Map[b].fgbg;
-   
-   /* If either are color 0, then we do not know what that means since the
-    * terminal does not support BCE */
-   if ((a == 0) || (b == 0))
-     return 0;
-     
-   return Ansi_Color_Map[a-1].fgbg == Ansi_Color_Map[b-1].fgbg;
-}
-#define COLOR_EQS(a,b) bce_color_eqs (a,b)
-#else
-# define COLOR_OF(x) (((unsigned int)(x) & COLOR_MASK) >> 8)
-# define COLOR_EQS(a, b) \
-   (SLtt_Use_Ansi_Colors \
-    ? (Ansi_Color_Map[COLOR_OF(a)].fgbg == Ansi_Color_Map[COLOR_OF(b)].fgbg)\
-    :  (Ansi_Color_Map[COLOR_OF(a)].mono == Ansi_Color_Map[COLOR_OF(b)].mono))
-#endif
-
-#define CHAR_EQS(a, b) (((a) == (b))\
-			|| ((((a) & ~COLOR_MASK) == ((b) & ~COLOR_MASK))\
-			    && COLOR_EQS((a), (b))))
-
-/* The whole point of this routine is to prevent writing to the last column
- * and last row on terminals with automatic margins.
- */
-static void write_string_with_care (char *str)
-{
-   unsigned int len;
-
-   if (str == NULL) return;
-
-   len = strlen (str);
-   if (Automatic_Margins && (Cursor_r + 1 == SLtt_Screen_Rows))
-     {
-	if (len + (unsigned int) Cursor_c >= (unsigned int) SLtt_Screen_Cols)
-	  {
-	     /* For now, just do not write there.  Later, something more
-	      * sophisticated will be implemented.
-	      */
-	     if (SLtt_Screen_Cols > Cursor_c)
-	       len = SLtt_Screen_Cols - Cursor_c - 1;
-	     else 
-	       len = 0;
-	  }
-     }
-   tt_write (str, len);
-}
-
-static void send_attr_str (SLsmg_Char_Type *s)
-{
-   unsigned char out[256], ch, *p;
-   register SLtt_Char_Type attr;
-   register SLsmg_Char_Type sh;
-   int color, last_color = -1;
-
-   p = out;
-   while (0 != (sh = *s++))
-     {
-	ch = sh & 0xFF;
-	color = ((int) sh & 0xFF00) >> 8;
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-	if (Bce_Color_Offset
-	    && (color >= Bce_Color_Offset))
-	  color -= Bce_Color_Offset;
-#endif
-
-	if (color != last_color)
-	  {
-	     if (SLtt_Use_Ansi_Colors) attr = Ansi_Color_Map[color & 0x7F].fgbg;
-	     else attr = Ansi_Color_Map[color & 0x7F].mono;
-
-	     if (sh & 0x8000) /* alternate char set */
-	       {
-		  if (SLtt_Use_Blink_For_ACS)
-		    {
-		       if (SLtt_Blink_Mode) attr |= SLTT_BLINK_MASK;
-		    }
-		  else attr |= SLTT_ALTC_MASK;
-	       }
-
-	     if (attr != Current_Fgbg)
-	       {
-		  if ((ch != ' ') ||
-		      /* it is a space so only consider it different if it
-		       * has different attributes.
-		       */
-		      (attr & BGALL_MASK) != (Current_Fgbg & BGALL_MASK))
-		    {
-		       if (p != out)
-			 {
-			    *p = 0;
-			    write_string_with_care ((char *) out);
-			    Cursor_c += (int) (p - out);
-			    p = out;
-			 }
-
-		       if (SLtt_Use_Ansi_Colors && (NULL != Ansi_Color_Map[color & 0x7F].custom_esc))
-			 {
-			    tt_write_string (Ansi_Color_Map[color & 0x7F].custom_esc);
-			    /* Just in case the custom escape sequence screwed up
-			     * the alt character set state...
-			     */
-	                    if ((attr & SLTT_ALTC_MASK) != (Current_Fgbg & SLTT_ALTC_MASK))
-			      SLtt_set_alt_char_set ((int) (attr & SLTT_ALTC_MASK));
-			    Current_Fgbg = attr;
-			 }
-		       else write_attributes (attr);
-
-		       last_color = color;
-		    }
-	       }
-	  }
-	*p++ = ch;
-     }
-   *p = 0;
-   if (p != out) write_string_with_care ((char *) out);
-   Cursor_c += (int) (p - out);
-}
-
-static void forward_cursor (unsigned int n, int row)
-{
-   char buf [1024];
-
-   if (n <= 4)
-     {
-	SLtt_normal_video ();
-	SLMEMSET (buf, ' ', n);
-	buf[n] = 0;
-	write_string_with_care (buf);
-	Cursor_c += n;
-     }
-   else if (Curs_F_Str != NULL)
-     {
-	Cursor_c += n;
-	n = tt_sprintf(buf, Curs_F_Str, (int) n, 0);
-	tt_write(buf, n);
-     }
-   else SLtt_goto_rc (row, (int) (Cursor_c + n));
-}
-
-
-void SLtt_smart_puts(SLsmg_Char_Type *neww, SLsmg_Char_Type *oldd, int len, int row)
-{
-   register SLsmg_Char_Type *p, *q, *qmax, *pmax, *buf;
-   SLsmg_Char_Type buffer[256];
-   unsigned int n_spaces;
-   SLsmg_Char_Type *space_match, *last_buffered_match;
-#ifdef HP_GLITCH_CODE
-   int handle_hp_glitch = 0;
-#endif
-   SLsmg_Char_Type space_char;
-#define SLTT_USE_INSERT_HACK 1
-#if SLTT_USE_INSERT_HACK
-   SLsmg_Char_Type insert_hack_prev = 0;
-   SLsmg_Char_Type insert_hack_char = 0;
-
-   if ((row + 1 == SLtt_Screen_Rows)
-       && (len == SLtt_Screen_Cols)
-       && (len > 1)
-       && (SLtt_Term_Cannot_Insert == 0)
-       && Automatic_Margins)
-     {
-	insert_hack_char = neww[len-1];
-	if (oldd[len-1] == insert_hack_char)
-	  insert_hack_char = 0;
-	else 
-	  insert_hack_prev = neww[len-2];
-     }
-#endif
-     
-   q = oldd; p = neww;
-   qmax = oldd + len;
-   pmax = p + len;
-
-   /* Find out where to begin --- while they match, we are ok */
-   while (1)
-     {
-	if (q == qmax) return;
-#if SLANG_HAS_KANJI_SUPPORT
-	if (*p & 0x80)
-	  { /* new is kanji */
-	     if ((*q & 0x80) && ((q + 1) < qmax))
-	       { /* old is also kanji */
-		  if (((0xFF & *q) != (0xFF & *p))
-		      || ((0xFF & q[1]) != (0xFF & p[1])))
-		    break; /* both kanji, but not match */
-
-		  else
-		    { /* kanji match ! */
-		       if (!COLOR_EQS(*q, *p)) break;
-		       q++; p++;
-		       if (!COLOR_EQS(*q, *p)) break;
-		       /* really match! */
-		       q++; p++;
-		       continue;
-		    }
-	       }
-	     else break; /* old is not kanji */
-	  }
-	else
-	  { /* new is not kanji */
-	     if (*q & 0x80) break; /* old is kanji */
-	  }
-#endif
-	if (!CHAR_EQS(*q, *p)) break;
-	q++; p++;
-     }
-
-#ifdef HP_GLITCH_CODE
-   if (Has_HP_Glitch)
-     {
-	SLsmg_Char_Type *qq = q;
-
-	SLtt_goto_rc (row, (int) (p - neww));
-
-	while (qq < qmax)
-	  {
-	     if (*qq & 0xFF00)
-	       {
-		  SLtt_normal_video ();
-		  SLtt_del_eol ();
-		  qmax = q;
-		  handle_hp_glitch = 1;
-		  break;
-	       }
-	     qq++;
-	  }
-     }
-#endif
-   /* Find where the last non-blank character on old/new screen is */
-
-   space_char = ' ';
-   if ((*(pmax-1) & 0xFF) == ' ')
-     {
-	/* If we get here, then we can erase to the end of the line to create
-	 * the final space.  However, this will only work _if_ erasing will 
-	 * get us the correct color.  If the terminal supports BCE, then this
-	 * is easy.  If it does not, then we can only perform this operation
-	 * if the color is known via something like COLORFGBG.  For now, 
-	 * I just will not perform the optimization for such terminals.
-	 */
-	if ((Can_Background_Color_Erase)
-	    && SLtt_Use_Ansi_Colors)
-	  space_char = *(pmax - 1);
-
-	while (pmax > p)
-	  {
-	     pmax--;
-	     if (!CHAR_EQS(*pmax, space_char))
-	       {
-		  pmax++;
-		  break;
-	       }
-	  }
-     }
-
-   while (qmax > q)
-     {
-	qmax--;
-	if (!CHAR_EQS(*qmax, space_char))
-	  {
-	     qmax++;
-	     break;
-	  }
-     }
-
-   last_buffered_match = buf = buffer;		       /* buffer is empty */
-
-#ifdef HP_GLITCH_CODE
-   if (handle_hp_glitch)
-     {
-	while (p < pmax)
-	  {
-	     *buf++ = *p++;
-	  }
-     }
-#endif
-
-#ifdef HP_GLITCH_CODE
-   if (Has_HP_Glitch == 0)
-     {
-#endif
-	/* Try use use erase to bol if possible */
-	if ((Del_Bol_Str != NULL) && ((*neww & 0xFF) == 32))
-	  {
-	     SLsmg_Char_Type *p1;
-	     SLsmg_Char_Type blank;
-
-	     p1 = neww;
-	     if ((Can_Background_Color_Erase)
-		 && SLtt_Use_Ansi_Colors)
-	       blank = *p1;
-	     /* black+white attributes do not support bce */
-	     else
-	       blank = 32;
-
-	     while ((p1 < pmax) && (CHAR_EQS (*p1, blank)))
-	       p1++;
-
-	     /* Is this optimization worth it?  Assume Del_Bol_Str is ESC [ 1 K
-	      * It costs 4 chars + the space needed to properly position the 
-	      * cursor, e.g., ESC [ 10;10H. So, it costs at least 13 characters.
-	      */
-	     if ((p1 > neww + 13) 
-		 && (p1 >= p)
-		 /* Avoid erasing from the end of the line */
-		 && ((p1 != pmax) || (pmax < neww + len)))
-	       {
-		  int ofs = (int) (p1 - neww);
-		  q = oldd + ofs;
-		  p = p1;
-		  SLtt_goto_rc (row, ofs - 1);
-		  SLtt_reverse_video (blank >> 8);
-		  tt_write_string (Del_Bol_Str);
-		  tt_write (" ", 1);
-		  Cursor_c += 1;
-	       }
-	     else
-	       SLtt_goto_rc (row, (int) (p - neww));
-	  }
-	else
-	  SLtt_goto_rc (row, (int) (p - neww));
-#ifdef HP_GLITCH_CODE
-     }
-#endif
-   
-   
-   /* loop using overwrite then skip algorithm until done */
-   while (1)
-     {
-	/* while they do not match and we do not hit a space, buffer them up */
-	n_spaces = 0;
-	while (p < pmax)
-	  {
-	     if (CHAR_EQS(*q, 32) && CHAR_EQS(*p, 32))
-	       {
-		  /* If *q is not a space, we would have to overwrite it.
-		   * However, if *q is a space, then while *p is also one,
-		   * we only need to skip over the blank field.
-		   */
-		  space_match = p;
-		  p++; q++;
-		  while ((p < pmax)
-			 && CHAR_EQS(*q, 32)
-			 && CHAR_EQS(*p, 32))
-		    {
-		       p++;
-		       q++;
-		    }
-		  n_spaces = (unsigned int) (p - space_match);
-		  break;
-	       }
-#if SLANG_HAS_KANJI_SUPPORT
-	     if ((*p & 0x80) && ((p + 1) < pmax))
-	       { /* new is kanji */
-		  if (*q & 0x80)
-		    { /* old is also kanji */
-		       if (((0xFF & *q) != (0xFF & *p))
-			   || ((0xFF & q[1]) != (0xFF & p[1])))
-			 {
-			    /* both kanji, but not match */
-			    *buf++ = *p++;
-			    *buf++ = *p++;
-			    q += 2;
-			    continue;
-			 }
-		       else
-			 { /* kanji match ? */
-			    if (!COLOR_EQS(*q, *p) || !COLOR_EQS(*(q+1), *(p+1)))
-			      {
-				 /* code is match, but color is diff */
-				 *buf++ = *p++;
-				 *buf++ = *p++;
-				 q += 2;
-				 continue;
-			      }
-			    /* really match ! */
-			    break;
-			 }
-		    }
- 		  else
-		    { /* old is not kanji */
-		       *buf++ = *p++;
-		       *buf++ = *p++;
-		       q += 2;
-		       continue;
-		    }
-	       }
-	     else
-	       { /* new is not kanji */
- 		  if (*q & 0x80)
-		    { /* old is kanji */
-		       *buf++ = *p++;
-		       q++;
-		       continue;
-		    }
-	       }
-#endif
-
-	     if (CHAR_EQS(*q, *p)) break;
-	     *buf++ = *p++;
-	     q++;
-	  }
-	*buf = 0;
-
-	if (buf != buffer) send_attr_str (buffer);
-	buf = buffer;
-
-	if (n_spaces 
-	    && ((p < pmax) 	       /* erase to eol will achieve this effect*/
-		|| (space_char != 32)))/* unless space_char is not a simple space */
-	  {
-	     forward_cursor (n_spaces, row);
-	  }
-
-	/* Now we overwrote what we could and cursor is placed at position
-	 * of a possible match of new and old.  If this is the case, skip
-	 * some more.
-	 */
-#if !SLANG_HAS_KANJI_SUPPORT
-	while ((p < pmax) && CHAR_EQS(*p, *q))
-	  {
-	     *buf++ = *p++;
-	     q++;
-	  }
-#else
-	/* Kanji */
-	while (p < pmax)
-	  {
-	     if ((*p & 0x80) && ((p + 1) < pmax))
-	       { /* new is kanji */
-		  if (*q & 0x80)
-		    { /* old is also kanji */
-		       if (((0xFF & *q) == (0xFF & *p))
-			   && ((0xFF & q[1]) == (0xFF & p[1])))
-			 {
-			    /* kanji match ? */
-			    if (!COLOR_EQS(*q, *p)
-				|| !COLOR_EQS(q[1], p[1]))
-			      break;
-
-			    *buf++ = *p++;
-			    q++;
-			    if (p >= pmax)
-			      {
-				 *buf++ = 32;
-				 p++;
-				 break;
-			      }
-			    else
-			      {
-				 *buf++ = *p++;
-				 q++;
-				 continue;
-			      }
-			 }
-		       else break; /* both kanji, but not match */
-		    }
-		  else break; /* old is not kanji */
-	       }
-	     else
-	       {  /* new is not kanji */
-		  if (*q & 0x80) break; /* old is kanji */
-		  if (!CHAR_EQS(*q, *p)) break;
-		  *buf++ = *p++;
-		  q++;
-	       }
-	  }
-#endif
-	last_buffered_match = buf;
-	if (p >= pmax) break;
-
-	/* jump to new position is it is greater than 5 otherwise
-	 * let it sit in the buffer and output it later.
-	 */
-	if ((int) (buf - buffer) >= 5)
-	  {
-	     forward_cursor ((unsigned int) (buf - buffer), row);
-	     last_buffered_match = buf = buffer;
-	  }
-     }
-
-   if (buf != buffer)
-     {
-	if (q < qmax)
-	  {
-	     if ((buf == last_buffered_match)
-		 && ((int) (buf - buffer) >= 5))
-	       {
-		  forward_cursor ((unsigned int) (buf - buffer), row);
-	       }
-	     else
-	       {
-		  *buf = 0;
-		  send_attr_str (buffer);
-	       }
-	  }
-     }
-
-   if (q < qmax) 
-     {
-	SLtt_reverse_video (space_char >> 8);
-	del_eol ();
-     }
-   
-#if SLTT_USE_INSERT_HACK
-   else if (insert_hack_char)
-     {
-	SLtt_goto_rc (SLtt_Screen_Rows-1, SLtt_Screen_Cols-2);
-	buffer[0] = insert_hack_char;
-	buffer[1] = 0;
-	send_attr_str (buffer);
-	SLtt_goto_rc (SLtt_Screen_Rows-1, SLtt_Screen_Cols-2);
-	buffer[0] = insert_hack_prev;
-	SLtt_begin_insert ();
-	send_attr_str (buffer);
-	SLtt_end_insert ();
-     }
-#endif
-
-   if (Automatic_Margins && (Cursor_c + 1 >= SLtt_Screen_Cols)) Cursor_Set = 0;
-}
-
-static void get_color_info (void)
-{
-   char *fg, *bg;
-
-   /* Allow easy mechanism to override inadequate termcap/terminfo files. */
-   if (SLtt_Use_Ansi_Colors == 0)
-     SLtt_Use_Ansi_Colors = (NULL != getenv ("COLORTERM"));
-
-   if (SLtt_Use_Ansi_Colors)
-     Is_Color_Terminal = 1;
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-   if (Can_Background_Color_Erase == 0)
-     Can_Background_Color_Erase = (NULL != getenv ("COLORTERM_BCE"));
-#endif
-
-   if (-1 == get_default_colors (&fg, &bg))
-     return;
-
-   /* Check to see if application has already set them. */
-   if (Color_0_Modified)
-     return;
-
-   SLtt_set_color (0, NULL, fg, bg);
-   SLtt_set_color (1, NULL, bg, fg);
-}
-
-/* termcap stuff */
-
-#ifdef __unix__
-
-static int Termcap_Initalized = 0;
-
-#ifdef USE_TERMCAP
-/* Termcap based system */
-static char Termcap_Buf[4096];
-static char Termcap_String_Buf[4096];
-static char *Termcap_String_Ptr;
-extern char *tgetstr(char *, char **);
-extern int tgetent(char *, char *);
-extern int tgetnum(char *);
-extern int tgetflag(char *);
-#else
-/* Terminfo */
-static SLterminfo_Type *Terminfo;
-#endif
-
-#define TGETFLAG(x) (SLtt_tgetflag(x) > 0)
-
-static char *fixup_tgetstr (char *what)
-{
-   register char *w, *w1;
-   char *wsave;
-   
-   if (what == NULL)
-     return NULL;
-
-   /* Check for AIX brain-damage */
-   if (*what == '@')
-     return NULL;
-
-   /* lose pad info --- with today's technology, term is a loser if
-    it is really needed */
-   while ((*what == '.') ||
-	  ((*what >= '0') && (*what <= '9'))) what++;
-   if (*what == '*') what++;
-   
-   /* lose terminfo padding--- looks like $<...> */
-   w = what;
-   while (*w) if ((*w++ == '$') && (*w == '<'))
-     {
-	w1 = w - 1;
-	while (*w && (*w != '>')) w++;
-	if (*w == 0) break;
-	w++;
-	wsave = w1;
-	while ((*w1++ = *w++) != 0);
-	w = wsave;
-     }
-
-   if (*what == 0) what = NULL;
-   return what;
-}
-
-char *SLtt_tgetstr (char *s)
-{
-   if (Termcap_Initalized == 0)
-     return NULL;
-   
-#ifdef USE_TERMCAP
-   s = tgetstr (s, &Termcap_String_Ptr);
-#else
-   s = _SLtt_tigetstr (Terminfo, s);
-#endif
-   return fixup_tgetstr (s);
-}
-
-int SLtt_tgetnum (char *s)
-{
-   if (Termcap_Initalized == 0)
-     return -1;
-#ifdef USE_TERMCAP
-   return tgetnum (s);
-#else
-   return _SLtt_tigetnum (Terminfo, s);
-#endif
-}
-
-int SLtt_tgetflag (char *s)
-{
-   if (Termcap_Initalized == 0)
-     return -1;
-#ifdef USE_TERMCAP
-   return tgetflag (s);
-#else
-   return _SLtt_tigetflag (Terminfo, s);
-#endif
-}
-
-static int Vt100_Like = 0;
-
-void SLtt_get_terminfo (void)
-{
-   char *term;
-   int status;
-
-   term = getenv ("TERM");
-   if (term == NULL)
-     SLang_exit_error("TERM environment variable needs set.");
-
-   if (0 == (status = SLtt_initialize (term)))
-     return;
-
-   if (status == -1)
-     {
-	SLang_exit_error ("Unknown terminal: %s\n\
-Check the TERM environment variable.\n\
-Also make sure that the terminal is defined in the terminfo database.\n\
-Alternatively, set the TERMCAP environment variable to the desired\n\
-termcap entry.",
-			  term);
-     }
-
-   if (status == -2)
-     {
-	SLang_exit_error ("\
-Your terminal lacks the ability to clear the screen or position the cursor.\n");
-     }
-}
-
-/* Returns 0 if all goes well, -1 if terminal capabilities cannot be deduced,
- * or -2 if terminal cannot position the cursor.
- */
-int SLtt_initialize (char *term)
-{
-   char *t, ch;
-   int is_xterm;
-   int almost_vtxxx;
-
-   if (SLang_TT_Write_FD == -1)
-     {
-	/* Apparantly, this cannot fail according to the man pages. */
-	SLang_TT_Write_FD = fileno (stdout);
-     }
-   
-   if (term == NULL)
-     {
-	term = getenv ("TERM");
-	if (term == NULL)
-	  return -1;
-     }
-
-   Linux_Console = (!strncmp (term, "linux", 5)
-# ifdef linux
-		    || !strncmp(term, "con", 3)
-# endif
-		    );
-
-   t = term;
-
-   if (strcmp(t, "vt52") && (*t++ == 'v') && (*t++ == 't')
-       && (ch = *t, (ch >= '1') && (ch <= '9'))) Vt100_Like = 1;
-
-   is_xterm = ((0 == strncmp (term, "xterm", 5))
-	       || (0 == strncmp (term, "rxvt", 4))
-	       || (0 == strncmp (term, "Eterm", 5)));
-
-   almost_vtxxx = (Vt100_Like
-		   || Linux_Console
-		   || is_xterm
-		   || !strcmp (term, "screen"));
-
-# ifndef USE_TERMCAP
-   if (NULL == (Terminfo = _SLtt_tigetent (term)))
-     {
-	if (almost_vtxxx) /* Special cases. */
-	  {
-	     int vt102 = 1;
-	     if (!strcmp (term, "vt100")) vt102 = 0;
-	     get_color_info ();
-   	     SLtt_set_term_vtxxx (&vt102);
-	     return 0;
-	  }
-	return -1;
-     }
-# else				       /* USE_TERMCAP */
-   if (1 != tgetent(Termcap_Buf, term))
-     return -1;
-   Termcap_String_Ptr = Termcap_String_Buf;
-# endif				       /* NOT USE_TERMCAP */
-
-   Termcap_Initalized = 1;
-
-   Cls_Str = SLtt_tgetstr ("cl");
-   Curs_Pos_Str = SLtt_tgetstr ("cm");
-
-   if ((NULL == (Ins_Mode_Str = SLtt_tgetstr("im")))
-       || ( NULL == (Eins_Mode_Str = SLtt_tgetstr("ei")))
-       || ( NULL == (Del_Char_Str = SLtt_tgetstr("dc"))))
-     SLtt_Term_Cannot_Insert = 1;
-
-   Visible_Bell_Str = SLtt_tgetstr ("vb");
-   Curs_Up_Str = SLtt_tgetstr ("up");
-   Rev_Scroll_Str = SLtt_tgetstr("sr");
-   Del_N_Lines_Str = SLtt_tgetstr("DL");
-   Add_N_Lines_Str = SLtt_tgetstr("AL");
-
-   /* Actually these are used to initialize terminals that use cursor
-    * addressing.  Hard to believe.
-    */
-   Term_Init_Str = SLtt_tgetstr ("ti");
-   Term_Reset_Str = SLtt_tgetstr ("te");
-
-   /* If I do this for vtxxx terminals, arrow keys start sending ESC O A,
-    * which I do not want.  This is mainly for HP terminals.
-    */
-   if ((almost_vtxxx == 0) || SLtt_Force_Keypad_Init)
-     {
-	Keypad_Init_Str = SLtt_tgetstr ("ks");
-	Keypad_Reset_Str = SLtt_tgetstr ("ke");
-     }
-
-   /* Make up for defective termcap/terminfo databases */
-   if ((Vt100_Like && (term[2] != '1'))
-       || Linux_Console
-       || is_xterm
-       )
-     {
-	if (Del_N_Lines_Str == NULL) Del_N_Lines_Str = "\033[%dM";
-	if (Add_N_Lines_Str == NULL) Add_N_Lines_Str = "\033[%dL";
-     }
-
-   Scroll_R_Str = SLtt_tgetstr("cs");
-
-   SLtt_get_screen_size ();
-
-   if ((Scroll_R_Str == NULL)
-       || (((NULL == Del_N_Lines_Str) || (NULL == Add_N_Lines_Str))
-	   && (NULL == Rev_Scroll_Str)))
-     {
-	if (is_xterm
-	    || Linux_Console
-	    )
-	  {
-	     /* Defective termcap mode!!!! */
-	     SLtt_set_term_vtxxx (NULL);
-	  }
-	else SLtt_Term_Cannot_Scroll = 1;
-     }
-
-   Del_Eol_Str = SLtt_tgetstr("ce");
-   Del_Bol_Str = SLtt_tgetstr("cb");
-   if (is_xterm && (Del_Bol_Str == NULL))
-     Del_Bol_Str = "\033[1K";
-   if (is_xterm && (Del_Eol_Str == NULL))
-     Del_Bol_Str = "\033[K";
-
-   Rev_Vid_Str = SLtt_tgetstr("mr");
-   if (Rev_Vid_Str == NULL) Rev_Vid_Str = SLtt_tgetstr("so");
-
-   Bold_Vid_Str = SLtt_tgetstr("md");
-
-   /* Although xterm cannot blink, it does display the blinking characters
-    * as bold ones.  Some Rxvt will display the background as high intensity.
-    */
-   if ((NULL == (Blink_Vid_Str = SLtt_tgetstr("mb")))
-       && is_xterm)
-     Blink_Vid_Str = "\033[5m";
-
-   UnderLine_Vid_Str = SLtt_tgetstr("us");
-
-   Start_Alt_Chars_Str = SLtt_tgetstr ("as");   /* smacs */
-   End_Alt_Chars_Str = SLtt_tgetstr ("ae");   /* rmacs */
-   Enable_Alt_Char_Set = SLtt_tgetstr ("eA");   /* enacs */
-   SLtt_Graphics_Char_Pairs = SLtt_tgetstr ("ac");
-
-   if (NULL == SLtt_Graphics_Char_Pairs)
-     {
-	/* make up for defective termcap/terminfo */
-	if (Vt100_Like)
-	  {
-	     Start_Alt_Chars_Str = "\016";
-	     End_Alt_Chars_Str = "\017";
-	     Enable_Alt_Char_Set = "\033)0";
-	  }
-     }
-
-    /* aixterm added by willi */
-   if (is_xterm || !strncmp (term, "aixterm", 7))
-     {
-	Start_Alt_Chars_Str = "\016";
-	End_Alt_Chars_Str = "\017";
-	Enable_Alt_Char_Set = "\033(B\033)0";
-     }
-
-   if ((SLtt_Graphics_Char_Pairs == NULL) &&
-       ((Start_Alt_Chars_Str == NULL) || (End_Alt_Chars_Str == NULL)))
-     {
-	SLtt_Has_Alt_Charset = 0;
-	Enable_Alt_Char_Set = NULL;
-     }
-   else SLtt_Has_Alt_Charset = 1;
-
-#ifdef AMIGA
-   Enable_Alt_Char_Set = Start_Alt_Chars_Str = End_Alt_Chars_Str = NULL;
-#endif
-
-   /* status line capabilities */
-   if ((SLtt_Has_Status_Line == -1)
-       && (0 != (SLtt_Has_Status_Line = TGETFLAG ("hs"))))
-     {
-	Disable_Status_line_Str = SLtt_tgetstr ("ds");
-	Return_From_Status_Line_Str = SLtt_tgetstr ("fs");
-	Goto_Status_Line_Str = SLtt_tgetstr ("ts");
-	/* Status_Line_Esc_Ok = TGETFLAG("es"); */
-	Num_Status_Line_Columns = SLtt_tgetnum ("ws");
-	if (Num_Status_Line_Columns < 0) Num_Status_Line_Columns = 0;
-     }
-
-   if (NULL == (Norm_Vid_Str = SLtt_tgetstr("me")))
-     {
-	Norm_Vid_Str = SLtt_tgetstr("se");
-     }
-
-   Cursor_Invisible_Str = SLtt_tgetstr("vi");
-   Cursor_Visible_Str = SLtt_tgetstr("ve");
-
-   Curs_F_Str = SLtt_tgetstr("RI");
-
-# if 0
-   if (NULL != Curs_F_Str)
-     {
-	Len_Curs_F_Str = strlen(Curs_F_Str);
-     }
-   else Len_Curs_F_Str = strlen(Curs_Pos_Str);
-# endif
-
-   Automatic_Margins = TGETFLAG ("am");
-   /* No_Move_In_Standout = !TGETFLAG ("ms"); */
-# ifdef HP_GLITCH_CODE
-   Has_HP_Glitch = TGETFLAG ("xs");
-# else
-   Worthless_Highlight = TGETFLAG ("xs");
-# endif
-
-   if (Worthless_Highlight == 0)
-     {				       /* Magic cookie glitch */
-	Worthless_Highlight = (SLtt_tgetnum ("sg") > 0);
-     }
-
-   if (Worthless_Highlight)
-     SLtt_Has_Alt_Charset = 0;
-
-   Reset_Color_String = SLtt_tgetstr ("op");
-   Color_Fg_Str = SLtt_tgetstr ("AF"); /* ANSI setaf */
-   Color_Bg_Str = SLtt_tgetstr ("AB"); /* ANSI setbf */
-   if ((Color_Fg_Str == NULL) || (Color_Bg_Str == NULL))
-     {
-	Color_Fg_Str = SLtt_tgetstr ("Sf");   /* setf */
-	Color_Bg_Str = SLtt_tgetstr ("Sb");   /* setb */
-     }
-
-   if ((Max_Terminfo_Colors = SLtt_tgetnum ("Co")) < 0)
-     Max_Terminfo_Colors = 8;
-
-   if ((Color_Bg_Str != NULL) && (Color_Fg_Str != NULL))
-     SLtt_Use_Ansi_Colors = 1;
-   else
-     {
-#if 0
-	Color_Fg_Str = "%?%p1%{7}%>%t\033[1;3%p1%{8}%m%dm%e\033[3%p1%dm%;";
-	Color_Bg_Str = "%?%p1%{7}%>%t\033[5;4%p1%{8}%m%dm%e\033[4%p1%dm%;";
-	Max_Terminfo_Colors = 16;
-#else
-	Color_Fg_Str = "\033[3%dm";
-	Color_Bg_Str = "\033[4%dm";
-	Max_Terminfo_Colors = 8;
-#endif
-     }
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-   Can_Background_Color_Erase = TGETFLAG ("ut");   /* bce */
-   /* Modern xterms have the BCE capability as well as the linux console */
-   if (Can_Background_Color_Erase == 0)
-     {
-	Can_Background_Color_Erase = (Linux_Console
-# if SLTT_XTERM_ALWAYS_BCE
-				      || is_xterm
-# endif
-				      );
-     }
-#endif
-   get_color_info ();
-
-  
-   if ((Cls_Str == NULL)
-       || (Curs_Pos_Str == NULL))
-     return -2;
-
-   return 0;
-}
-
-#endif
-/* Unix */
-
-/* specific to vtxxx only */
-void SLtt_enable_cursor_keys (void)
-{
-#ifdef __unix__
-   if (Vt100_Like)
-#endif
-     tt_write_string("\033=\033[?1l");
-}
-
-#ifdef VMS
-int SLtt_initialize (char *term)
-{
-   SLtt_get_terminfo ();
-   return 0;
-}
-
-void SLtt_get_terminfo ()
-{
-   int zero = 0;
-
-   Color_Fg_Str = "\033[3%dm";
-   Color_Bg_Str = "\033[4%dm";
-   Max_Terminfo_Colors = 8;
-
-   get_color_info ();
-
-   SLtt_set_term_vtxxx(&zero);
-   Start_Alt_Chars_Str = "\016";
-   End_Alt_Chars_Str = "\017";
-   SLtt_Has_Alt_Charset = 1;
-   SLtt_Graphics_Char_Pairs = "aaffgghhjjkkllmmnnooqqssttuuvvwwxx";
-   Enable_Alt_Char_Set = "\033(B\033)0";
-   SLtt_get_screen_size ();
-}
-#endif
-
-/* This sets term for vt102 terminals it parameter vt100 is 0.  If vt100
- * is non-zero, set terminal appropriate for a only vt100
- * (no add line capability). */
-
-void SLtt_set_term_vtxxx(int *vt100)
-{
-   Norm_Vid_Str = "\033[m";
-
-   Scroll_R_Str = "\033[%i%d;%dr";
-   Cls_Str = "\033[2J\033[H";
-   Rev_Vid_Str = "\033[7m";
-   Bold_Vid_Str = "\033[1m";
-   Blink_Vid_Str = "\033[5m";
-   UnderLine_Vid_Str = "\033[4m";
-   Del_Eol_Str = "\033[K";
-   Del_Bol_Str = "\033[1K";
-   Rev_Scroll_Str = "\033M";
-   Curs_F_Str = "\033[%dC";
-   /* Len_Curs_F_Str = 5; */
-   Curs_Pos_Str = "\033[%i%d;%dH";
-   if ((vt100 == NULL) || (*vt100 == 0))
-     {
-	Ins_Mode_Str = "\033[4h";
-	Eins_Mode_Str = "\033[4l";
-	Del_Char_Str =  "\033[P";
-	Del_N_Lines_Str = "\033[%dM";
-	Add_N_Lines_Str = "\033[%dL";
-	SLtt_Term_Cannot_Insert = 0;
-     }
-   else
-     {
-	Del_N_Lines_Str = NULL;
-	Add_N_Lines_Str = NULL;
-	SLtt_Term_Cannot_Insert = 1;
-     }
-   SLtt_Term_Cannot_Scroll = 0;
-   /* No_Move_In_Standout = 0; */
-}
-
-int SLtt_init_video (void)
-{
-   /*   send_string_to_term("\033[?6h"); */
-   /* relative origin mode */
-   tt_write_string (Term_Init_Str);
-   tt_write_string (Keypad_Init_Str);
-   SLtt_reset_scroll_region();
-   SLtt_end_insert();
-   tt_write_string (Enable_Alt_Char_Set);
-   Video_Initialized = 1;
-   return 0;
-}
-
-int SLtt_reset_video (void)
-{
-   SLtt_goto_rc (SLtt_Screen_Rows - 1, 0);
-   Cursor_Set = 0;
-   SLtt_normal_video ();	       /* MSKermit requires this  */
-   tt_write_string(Norm_Vid_Str);
-
-   Current_Fgbg = 0xFFFFFFFFU;
-   SLtt_set_alt_char_set (0);
-   if (SLtt_Use_Ansi_Colors)
-     {
-	if (Reset_Color_String == NULL)
-	  {
-	     SLtt_Char_Type attr;
-	     if (-1 != make_color_fgbg (NULL, NULL, &attr))
-	       write_attributes (attr);
-	     else tt_write_string ("\033[0m\033[m");
-	  }
-	else tt_write_string (Reset_Color_String);
-	Current_Fgbg = 0xFFFFFFFFU;
-     }
-   SLtt_erase_line ();
-   tt_write_string (Keypad_Reset_Str);
-   tt_write_string (Term_Reset_Str);
-   SLtt_flush_output ();
-   Video_Initialized = 0;
-   return 0;
-}
-
-void SLtt_bold_video (void)
-{
-   tt_write_string (Bold_Vid_Str);
-}
-
-int SLtt_set_mouse_mode (int mode, int force)
-{
-   char *term;
-
-   if (force == 0)
-     {
-	if (NULL == (term = (char *) getenv("TERM"))) return -1;
-	if (strncmp ("xterm", term, 5))
-	  return -1;
-     }
-
-   if (mode)
-     tt_write_string ("\033[?9h");
-   else
-     tt_write_string ("\033[?9l");
-
-   return 0;
-}
-
-void SLtt_disable_status_line (void)
-{
-   if (SLtt_Has_Status_Line > 0)
-     {
-	tt_write_string (Disable_Status_line_Str);
-	SLtt_flush_output ();
-     }
-}
-
-int SLtt_write_to_status_line (char *s, int col)
-{
-   if ((SLtt_Has_Status_Line <= 0)
-       || (Goto_Status_Line_Str == NULL)
-       || (Return_From_Status_Line_Str == NULL))
-     return -1;
-
-   tt_printf (Goto_Status_Line_Str, col, 0);
-   tt_write_string (s);
-   tt_write_string (Return_From_Status_Line_Str);
-   return 0;
-}
-
-void SLtt_get_screen_size (void)
-{
-#ifdef VMS
-   int status, code;
-   unsigned short chan;
-   $DESCRIPTOR(dev_dsc, "SYS$INPUT:");
-#endif
-   int r = 0, c = 0;
-
-#ifdef TIOCGWINSZ
-   struct winsize wind_struct;
-
-   do
-     {
-	if ((ioctl(1,TIOCGWINSZ,&wind_struct) == 0)
-	    || (ioctl(0, TIOCGWINSZ, &wind_struct) == 0)
-	    || (ioctl(2, TIOCGWINSZ, &wind_struct) == 0))
-	  {
-	     c = (int) wind_struct.ws_col;
-	     r = (int) wind_struct.ws_row;
-	     break;
-	  }
-     }
-   while (errno == EINTR);
-
-#endif
-
-#ifdef VMS
-   status = sys$assign(&dev_dsc,&chan,0,0,0);
-   if (status & 1)
-     {
-	code = DVI$_DEVBUFSIZ;
-	status = lib$getdvi(&code, &chan,0, &c, 0,0);
-	if (!(status & 1))
-	  c = 80;
-	code = DVI$_TT_PAGE;
-	status = lib$getdvi(&code, &chan,0, &r, 0,0);
-	if (!(status & 1))
-	  r = 24;
-	sys$dassgn(chan);
-     }
-#endif
-
-   if (r <= 0)
-     {
-	char *s = getenv ("LINES");
-	if (s != NULL) r = atoi (s);
-     }
-
-   if (c <= 0)
-     {
-	char *s = getenv ("COLUMNS");
-	if (s != NULL) c = atoi (s);
-     }
-
-   if (r <= 0) r = 24;
-   if (c <= 0) c = 80;
-#if 0
-   if ((r <= 0) || (r > 200)) r = 24;
-   if ((c <= 0) || (c > 250)) c = 80;
-#endif
-   SLtt_Screen_Rows = r;
-   SLtt_Screen_Cols = c;
-}
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-int _SLtt_get_bce_color_offset (void)
-{
-   if ((SLtt_Use_Ansi_Colors == 0)
-       || Can_Background_Color_Erase
-       || SLtt_Use_Blink_For_ACS)      /* in this case, we cannot lose a color */
-     Bce_Color_Offset = 0;
-   else
-     {
-	if (GET_BG(Ansi_Color_Map[0].fgbg) == SLSMG_COLOR_DEFAULT)
-	  Bce_Color_Offset = 0;
-	else
-	  Bce_Color_Offset = 1;
-     }
-   
-   return Bce_Color_Offset;
-}
-#endif
diff --git a/mdk-stage1/slang/slerr.c b/mdk-stage1/slang/slerr.c
deleted file mode 100644
index 139b3859b..000000000
--- a/mdk-stage1/slang/slerr.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/* error handling common to all routines. */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-void (*SLang_VMessage_Hook) (char *, va_list);
-void (*SLang_Error_Hook)(char *);
-void (*SLang_Exit_Error_Hook)(char *, va_list);
-volatile int SLang_Error = 0;
-char *SLang_Error_Message;
-volatile int SLKeyBoard_Quit = 0;
-
-static char *get_error_string (void)
-{
-   char *str;
-
-   if (!SLang_Error) SLang_Error = SL_UNKNOWN_ERROR;
-   if (SLang_Error_Message != NULL) str = SLang_Error_Message;
-   else switch(SLang_Error)
-     {
-      case SL_NOT_IMPLEMENTED: str = "Not Implemented"; break;
-      case SL_APPLICATION_ERROR: str = "Application Error"; break;
-      case SL_VARIABLE_UNINITIALIZED: str = "Variable Uninitialized"; break;
-      case SL_MALLOC_ERROR : str = "Malloc Error"; break;
-      case SL_INTERNAL_ERROR: str = "Internal Error"; break;
-      case SL_STACK_OVERFLOW: str = "Stack Overflow"; break;
-      case SL_STACK_UNDERFLOW: str = "Stack Underflow"; break;
-      case SL_INTRINSIC_ERROR: str = "Intrinsic Error"; break;
-      case SL_USER_BREAK: str = "User Break"; break;
-      case SL_UNDEFINED_NAME: str = "Undefined Name"; break;
-      case SL_SYNTAX_ERROR: str = "Syntax Error"; break;
-      case SL_DUPLICATE_DEFINITION: str = "Duplicate Definition"; break;
-      case SL_TYPE_MISMATCH: str = "Type Mismatch"; break;
-      case SL_READONLY_ERROR: str = "Variable is read-only"; break;
-      case SL_DIVIDE_ERROR: str = "Divide by zero"; break;
-      case SL_OBJ_NOPEN: str = "Object not opened"; break;
-      case SL_OBJ_UNKNOWN: str = "Object unknown"; break;
-      case SL_INVALID_PARM: str = "Invalid Parameter"; break;
-      case SL_TYPE_UNDEFINED_OP_ERROR:
-	str = "Operation not defined for datatype"; break;
-      case SL_USER_ERROR:
-	str = "User Error"; break;
-      case SL_USAGE_ERROR:
-	str = "Illegal usage of function";
-	break;
-      case SL_FLOATING_EXCEPTION:
-	str = "Floating Point Exception";
-	break;
-      case SL_UNKNOWN_ERROR:
-      default: str = "Unknown Error Code";
-     }
-
-   SLang_Error_Message = NULL;
-   return str;
-}
-
-void SLang_doerror (char *error)
-{
-   char *str = NULL;
-   char *err;
-   char *malloced_err_buf;
-   char err_buf [1024];
-
-   malloced_err_buf = NULL;
-
-   if (((SLang_Error == SL_USER_ERROR)
-	|| (SLang_Error == SL_USAGE_ERROR))
-       && (error != NULL) && (*error != 0))
-     err = error;
-   else
-     {
-	char *sle = "S-Lang Error: ";
-	unsigned int len;
-	char *fmt;
-
-	str = get_error_string ();
-
-	fmt = "%s%s%s";
-	if ((error == NULL) || (*error == 0))
-	  error = "";
-	else if (SLang_Error == SL_UNKNOWN_ERROR)
-	  /* Do not display an unknown error message if error is non-NULL */
-	  str = "";
-	else
-	  fmt = "%s%s: %s";
-
-	len = strlen (sle) + strlen (str) + strlen(error) + 1;
-
-	err = err_buf;
-	if (len >= sizeof (err_buf))
-	  {
-	     if (NULL == (malloced_err_buf = SLmalloc (len)))
-	       err = NULL;
-	     else
-	       err = malloced_err_buf;
-	  }
-
-	if (err != NULL) sprintf (err, fmt, sle, str, error);
-	else err = "Out of memory";
-     }
-
-   if (SLang_Error_Hook == NULL)
-     {
-	fputs (err, stderr);
-	fputs("\r\n", stderr);
-	fflush (stderr);
-     }
-   else
-     (*SLang_Error_Hook)(err);
-
-   SLfree (malloced_err_buf);
-}
-
-void SLang_verror (int err_code, char *fmt, ...)
-{
-   va_list ap;
-   char err [1024];
-
-   if (err_code == 0) err_code = SL_INTRINSIC_ERROR;
-   if (SLang_Error == 0) SLang_Error = err_code;
-
-   if (fmt != NULL)
-     {
-	va_start(ap, fmt);
-	(void) _SLvsnprintf (err, sizeof (err), fmt, ap);
-	fmt = err;
-	va_end(ap);
-     }
-
-   SLang_doerror (fmt);
-}
-
-void SLang_exit_error (char *fmt, ...)
-{
-   va_list ap;
-
-   va_start (ap, fmt);
-   if (SLang_Exit_Error_Hook != NULL)
-     {
-	(*SLang_Exit_Error_Hook) (fmt, ap);
-	exit (1);
-     }
-
-   if (fmt != NULL)
-     {
-	vfprintf (stderr, fmt, ap);
-	fputs ("\r\n", stderr);
-	fflush (stderr);
-     }
-   va_end (ap);
-
-   exit (1);
-}
-
-void SLang_vmessage (char *fmt, ...)
-{
-   va_list ap;
-
-   if (fmt == NULL)
-     return;
-
-   va_start (ap, fmt);
-
-   if (SLang_VMessage_Hook != NULL)
-     (*SLang_VMessage_Hook) (fmt, ap);
-   else
-     {
-	vfprintf (stdout, fmt, ap);
-	fputs ("\r\n", stdout);
-     }
-
-   va_end (ap);
-}
diff --git a/mdk-stage1/slang/slerrno.c b/mdk-stage1/slang/slerrno.c
deleted file mode 100644
index 662fadde1..000000000
--- a/mdk-stage1/slang/slerrno.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/* The point of this file is to handle errno values in a system independent
- * way so that they may be used in slang scripts.
- */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include <errno.h>
-#include "slang.h"
-#include "_slang.h"
-
-typedef struct
-{
-   char *msg;
-   int sys_errno;
-   char *symbolic_name;
-}
-Errno_Map_Type;
-
-static Errno_Map_Type Errno_Map [] =
-{
-#ifndef EPERM
-# define EPERM	-1
-#endif
-     {"Not owner",			EPERM,	"EPERM"},
-#ifndef ENOENT
-# define ENOENT	-1
-#endif
-     {"No such file or directory",	ENOENT,	"ENOENT"},
-#ifndef ESRCH
-# define ESRCH	-1
-#endif
-     {"No such process",		ESRCH,	"ESRCH"},
-#ifndef EINTR
-# define EINTR	-1
-#endif
-     {"Interrupted system call",	EINTR,	"EINTR"},
-#ifndef EIO
-# define EIO	-1
-#endif
-     {"I/O error",			EIO,	"EIO"},
-#ifndef ENXIO
-# define ENXIO	-1
-#endif
-     {"No such device or address",	ENXIO,	"ENXIO"},
-#ifndef E2BIG
-# define E2BIG	-1
-#endif
-     {"Arg list too long",		E2BIG,	"E2BIG"},
-#ifndef ENOEXEC
-# define ENOEXEC	-1
-#endif
-     {"Exec format error",		ENOEXEC,"ENOEXEC"},
-#ifndef EBADF
-# define EBADF	-1
-#endif
-     {"Bad file number",		EBADF,	"EBADF"},
-#ifndef ECHILD
-# define ECHILD	-1
-#endif
-     {"No children",			ECHILD,	"ECHILD"},
-#ifndef EAGAIN
-# define EAGAIN	-1
-#endif
-     {"Try again",			EAGAIN,	"EAGAIN"},
-#ifndef ENOMEM
-# define ENOMEM	-1
-#endif
-     {"Not enough core",		ENOMEM,	"ENOMEM"},
-#ifndef EACCES
-# define EACCES	-1
-#endif
-     {"Permission denied",		EACCES,	"EACCES"},
-#ifndef EFAULT
-# define EFAULT	-1
-#endif
-     {"Bad address",			EFAULT,	"EFAULT"},
-#ifndef ENOTBLK
-# define ENOTBLK	-1
-#endif
-     {"Block device required",		ENOTBLK,	"ENOTBLK"},
-#ifndef EBUSY
-# define EBUSY	-1
-#endif
-     {"Mount device busy",		EBUSY,	"EBUSY"},
-#ifndef EEXIST
-# define EEXIST	-1
-#endif
-     {"File exists",			EEXIST,	"EEXIST"},
-#ifndef EXDEV
-# define EXDEV	-1
-#endif
-     {"Cross-device link",		EXDEV,	"EXDEV"},
-#ifndef ENODEV
-# define ENODEV	-1
-#endif
-     {"No such device",			ENODEV,	"ENODEV"},
-#ifndef ENOTDIR
-# define ENOTDIR	-1
-#endif
-     {"Not a directory",		ENOTDIR,	"ENOTDIR"},
-#ifndef EISDIR
-# define EISDIR	-1
-#endif
-     {"Is a directory",			EISDIR,	"EISDIR"},
-#ifndef EINVAL
-# define EINVAL	-1
-#endif
-     {"Invalid argument",		EINVAL,	"EINVAL"},
-#ifndef ENFILE
-# define ENFILE	-1
-#endif
-     {"File table overflow",		ENFILE,	"ENFILE"},
-#ifndef EMFILE
-# define EMFILE	-1
-#endif
-     {"Too many open files",		EMFILE,	"EMFILE"},
-#ifndef ENOTTY
-# define ENOTTY	-1
-#endif
-     {"Not a typewriter",		ENOTTY,	"ENOTTY"},
-#ifndef ETXTBSY
-# define ETXTBSY	-1
-#endif
-     {"Text file busy",			ETXTBSY,	"ETXTBSY"},
-#ifndef EFBIG
-# define EFBIG	-1
-#endif
-     {"File too large",			EFBIG,	"EFBIG"},
-#ifndef ENOSPC
-# define ENOSPC	-1
-#endif
-     {"No space left on device",	ENOSPC,	"ENOSPC"},
-#ifndef ESPIPE
-# define ESPIPE	-1
-#endif
-     {"Illegal seek",			ESPIPE,	"ESPIPE"},
-#ifndef EROFS
-# define EROFS	-1
-#endif
-     {"Read-only file system",		EROFS,	"EROFS"},
-#ifndef EMLINK
-# define EMLINK	-1
-#endif
-     {"Too many links",			EMLINK,	"EMLINK"},
-#ifndef EPIPE
-# define EPIPE	-1
-#endif
-     {"Broken pipe",			EPIPE,	"EPIPE"},
-#ifndef ELOOP
-# define ELOOP	-1
-#endif
-     {"Too many levels of symbolic links",ELOOP,	"ELOOP"},
-#ifndef ENAMETOOLONG
-# define ENAMETOOLONG	-1
-#endif
-     {"File name too long",		ENAMETOOLONG,	"ENAMETOOLONG"},
-
-     {NULL, 0, NULL}
-};
-
-int _SLerrno_errno;
-
-int SLerrno_set_errno (int sys_errno)
-{
-   _SLerrno_errno = sys_errno;
-   return 0;
-}
-
-char *SLerrno_strerror (int sys_errno)
-{
-   Errno_Map_Type *e;
-
-   e = Errno_Map;
-   while (e->msg != NULL)
-     {
-	if (e->sys_errno == sys_errno)
-	  return e->msg;
-
-	e++;
-     }
-
-   if (sys_errno == SL_ERRNO_NOT_IMPLEMENTED)
-     return "System call not available for this platform";
-
-   return "Unknown error";
-}
-
-static char *intrin_errno_string (int *sys_errno)
-{
-   return SLerrno_strerror (*sys_errno);
-}
-
-int _SLerrno_init (void)
-{
-   static Errno_Map_Type *e;
-
-   if (e != NULL)		       /* already initialized */
-     return 0;
-
-   if ((-1 == SLadd_intrinsic_function ("errno_string", (FVOID_STAR) intrin_errno_string,
-				       SLANG_STRING_TYPE, 1, SLANG_INT_TYPE))
-       || (-1 == SLadd_intrinsic_variable ("errno", (VOID_STAR)&_SLerrno_errno, SLANG_INT_TYPE, 1)))
-     return -1;
-
-   e = Errno_Map;
-   while (e->msg != NULL)
-     {
-	if (-1 == SLadd_intrinsic_variable (e->symbolic_name, (VOID_STAR) &e->sys_errno, SLANG_INT_TYPE, 1))
-	  return -1;
-	e++;
-     }
-
-   return 0;
-}
diff --git a/mdk-stage1/slang/slgetkey.c b/mdk-stage1/slang/slgetkey.c
deleted file mode 100644
index 2f2914f07..000000000
--- a/mdk-stage1/slang/slgetkey.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-unsigned int SLang_Input_Buffer_Len = 0;
-unsigned char SLang_Input_Buffer [SL_MAX_INPUT_BUFFER_LEN];
-
-int SLang_Abort_Char = 7;
-int SLang_Ignore_User_Abort = 0;
-
-/* This has the effect of mapping all characters in the range 128-169 to
- * ESC [ something
- */
-
-unsigned int SLang_getkey (void)
-{
-   unsigned int imax;
-   unsigned int ch;
-
-   if (SLang_Input_Buffer_Len)
-     {
-	ch = (unsigned int) *SLang_Input_Buffer;
-	SLang_Input_Buffer_Len--;
-	imax = SLang_Input_Buffer_Len;
-
-	SLMEMCPY ((char *) SLang_Input_Buffer,
-		(char *) (SLang_Input_Buffer + 1), imax);
-     }
-   else if (SLANG_GETKEY_ERROR == (ch = _SLsys_getkey ())) return ch;
-
-#if _SLANG_MAP_VTXXX_8BIT
-# if !defined(IBMPC_SYSTEM)
-   if (ch & 0x80)
-     {
-	unsigned char i;
-	i = (unsigned char) (ch & 0x7F);
-	if (i < ' ')
-	  {
-	     i += 64;
-	     SLang_ungetkey (i);
-	     ch = 27;
-	  }
-     }
-# endif
-#endif
-   return(ch);
-}
-
-int SLang_ungetkey_string (unsigned char *s, unsigned int n)
-{
-   register unsigned char *bmax, *b, *b1;
-   if (SLang_Input_Buffer_Len + n + 3 > SL_MAX_INPUT_BUFFER_LEN)
-     return -1;
-
-   b = SLang_Input_Buffer;
-   bmax = (b - 1) + SLang_Input_Buffer_Len;
-   b1 = bmax + n;
-   while (bmax >= b) *b1-- = *bmax--;
-   bmax = b + n;
-   while (b < bmax) *b++ = *s++;
-   SLang_Input_Buffer_Len += n;
-   return 0;
-}
-
-int SLang_buffer_keystring (unsigned char *s, unsigned int n)
-{
-
-   if (n + SLang_Input_Buffer_Len + 3 > SL_MAX_INPUT_BUFFER_LEN) return -1;
-
-   SLMEMCPY ((char *) SLang_Input_Buffer + SLang_Input_Buffer_Len,
-	   (char *) s, n);
-   SLang_Input_Buffer_Len += n;
-   return 0;
-}
-
-int SLang_ungetkey (unsigned char ch)
-{
-   return SLang_ungetkey_string(&ch, 1);
-}
-
-int SLang_input_pending (int tsecs)
-{
-   int n;
-   unsigned char c;
-   if (SLang_Input_Buffer_Len) return (int) SLang_Input_Buffer_Len;
-
-   n = _SLsys_input_pending (tsecs);
-
-   if (n <= 0) return 0;
-
-   c = (unsigned char) SLang_getkey ();
-   SLang_ungetkey_string (&c, 1);
-
-   return n;
-}
-
-void SLang_flush_input (void)
-{
-   int quit = SLKeyBoard_Quit;
-
-   SLang_Input_Buffer_Len = 0;
-   SLKeyBoard_Quit = 0;
-   while (_SLsys_input_pending (0) > 0)
-     {
-	(void) _SLsys_getkey ();
-	/* Set this to 0 because _SLsys_getkey may stuff keyboard buffer if
-	 * key sends key sequence (OS/2, DOS, maybe VMS).
-	 */
-	SLang_Input_Buffer_Len = 0;
-     }
-   SLKeyBoard_Quit = quit;
-}
-
-#ifdef IBMPC_SYSTEM
-static int Map_To_ANSI;
-int SLgetkey_map_to_ansi (int enable)
-{
-   Map_To_ANSI = enable;
-   return 0;
-}
-
-static int convert_scancode (unsigned int scan, 
-			     unsigned int shift,
-			     int getkey,
-			     unsigned int *ret_key)
-{
-   unsigned char buf[16];
-   unsigned char *b;
-   unsigned char end;
-   int is_arrow;
-
-   shift &= (_SLTT_KEY_ALT|_SLTT_KEY_SHIFT|_SLTT_KEY_CTRL);
-
-   b = buf;
-   if (_SLTT_KEY_ALT == shift)
-     {
-	shift = 0;
-	*b++ = 27;
-     }
-   *b++ = 27;
-   *b++ = '[';
-
-   is_arrow = 0;
-   end = '~';
-   if (shift)
-     {
-	if (shift == _SLTT_KEY_CTRL)
-	  end = '^';
-	else if (shift == _SLTT_KEY_SHIFT)
-	  end = '$';
-	else shift = 0;
-     }
-
-   /* These mappings correspond to what rxvt produces under Linux */
-   switch (scan & 0xFF)
-     {
-      default:
-	return -1;
-
-      case 0x47:		       /* home */
-	*b++ = '1';
-	break;
-      case 0x48:		       /* up */
-	end = 'A';
-	is_arrow = 1;
-	break;
-      case 0x49:		       /* PgUp */
-	*b++ = '5';
-	break;
-      case 0x4B:		       /* Left */
-	end = 'D';
-	is_arrow = 1;
-	break;
-      case 0x4D:		       /* Right */
-	end = 'C';
-	is_arrow = 1;
-	break;
-      case 0x4F:		       /* End */
-	*b++ = '4';
-	break;
-      case 0x50:		       /* Down */
-	end = 'B';
-	is_arrow = 1;
-	break;
-      case 0x51:		       /* PgDn */
-	*b++ = '6';
-	break;
-      case 0x52:		       /* Insert */
-	*b++ = '2';
-	break;
-      case 0x53:		       /* Delete */
-	*b++ = '3';
-	break;
-      case ';':			       /* F1 */
-	*b++ = '1';
-	*b++ = '1';
-	break;
-      case '<':			       /* F2 */
-	*b++ = '1';
-	*b++ = '2';
-	break;
-      case '=':			       /* F3 */
-	*b++ = '1';
-	*b++ = '3';
-	break;
-
-      case '>':			       /* F4 */
-	*b++ = '1';
-	*b++ = '4';
-	break;
-
-      case '?':			       /* F5 */
-	*b++ = '1';
-	*b++ = '5';
-	break;
-
-      case '@':			       /* F6 */
-	*b++ = '1';
-	*b++ = '7';
-	break;
-
-      case 'A':			       /* F7 */
-	*b++ = '1';
-	*b++ = '8';
-	break;
-
-      case 'B':			       /* F8 */
-	*b++ = '1';
-	*b++ = '9';
-	break;
-
-      case 'C':			       /* F9 */
-	*b++ = '2';
-	*b++ = '0';
-	break;
-
-      case 'D':			       /* F10 */
-	*b++ = '2';
-	*b++ = '1';
-	break;
-
-      case 0x57:		       /* F11 */
-	*b++ = '2';
-	*b++ = '3';
-	break;
-
-      case 0x58:		       /* F12 */
-	*b++ = '2';
-	*b++ = '4';
-	break;
-     }
-
-   if (is_arrow && shift)
-     {
-	if (shift == _SLTT_KEY_CTRL)
-	  end &= 0x1F;
-	else
-	  end |= 0x20;
-     }
-   *b++ = end;
-   
-   if (getkey)
-     {
-	(void) SLang_buffer_keystring (buf + 1, (unsigned int) (b - (buf + 1)));
-	*ret_key = buf[0];
-	return 0;
-     }
-
-   (void) SLang_buffer_keystring (buf, (unsigned int) (b - buf));
-   return 0;
-}
-
-   
-unsigned int _SLpc_convert_scancode (unsigned int scan,
-				     unsigned int shift,
-				     int getkey)
-{
-   unsigned char buf[16];
-
-   if (Map_To_ANSI)
-     {
-	if (0 == convert_scancode (scan, shift, getkey, &scan))
-	  return scan;
-     }
-   
-   if (getkey)
-     {
-	buf[0] = scan & 0xFF;
-	SLang_buffer_keystring (buf, 1);
-	return (scan >> 8) & 0xFF;
-     }
-   buf[0] = (scan >> 8) & 0xFF;
-   buf[1] = scan & 0xFF;
-   (void) SLang_buffer_keystring (buf, 2);
-   return 0;
-}
-
-#endif
diff --git a/mdk-stage1/slang/slimport.c b/mdk-stage1/slang/slimport.c
deleted file mode 100644
index 44b4b25e1..000000000
--- a/mdk-stage1/slang/slimport.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#define SLANG_HAS_DYNAMIC_LINKING 1
-
-#ifndef HAVE_DLFCN_H
-# undef SLANG_HAS_DYNAMIC_LINKING
-# define SLANG_HAS_DYNAMIC_LINKING	0
-#endif
-
-/* The rest of this file is in the if block */
-#if SLANG_HAS_DYNAMIC_LINKING
-
-#ifdef HAVE_DLFCN_H
-# include <dlfcn.h>
-#endif
-
-static char *Module_Path;
-#define MODULE_PATH_ENV_NAME	"SLANG_MODULE_PATH"
-#ifndef MODULE_INSTALL_DIR
-# define MODULE_INSTALL_DIR "/usr/local/lib/slang/modules"
-#endif
-
-typedef struct _Handle_Type
-{
-   struct _Handle_Type *next;
-   char *name;
-   VOID_STAR handle;
-   void (*deinit_fun) (void);
-}
-Handle_Type;
-
-static Handle_Type *Handle_List;
-
-static void delete_handles (void)
-{
-   while (Handle_List != NULL)
-     {
-	Handle_Type *next = Handle_List->next;
-
-	if (Handle_List->deinit_fun != NULL)
-	  Handle_List->deinit_fun ();
-	(void) dlclose (Handle_List->handle);
-	SLang_free_slstring (Handle_List->name);
-	SLfree ((char *)Handle_List);
-	Handle_List = next;
-     }
-}
-
-static Handle_Type *save_handle (char *name, VOID_STAR h, void (*df)(void))
-{
-   Handle_Type *l;
-
-   l = (Handle_Type *) SLmalloc (sizeof (Handle_Type));
-   if (l == NULL)
-     return NULL;
-   memset ((char *) l, 0, sizeof(Handle_Type));
-   if (NULL == (l->name = SLang_create_slstring (name)))
-     {
-	SLfree ((char *) l);
-	return NULL;
-     }
-   l->handle = h;
-   l->next = Handle_List;
-   l->deinit_fun = df;
-   Handle_List = l;
-
-   return l;
-}
-
-static Handle_Type *find_handle (char *name)
-{
-   Handle_Type *l;
-
-   l = Handle_List;
-   while (l != NULL)
-     {
-	if (0 == strcmp (l->name, name))
-	  break;
-	l = l->next;
-     }
-   return l;
-}
-
-static int import_from_library (char *name, 
-				char *init_fun_name, char *deinit_fun_name,
-				char *file,
-				char *ns,
-				char *ns_init_fun_name)
-{
-   VOID_STAR handle;
-   int (*init_fun) (void);
-   int (*ns_init_fun) (char *);
-   void (*deinit_fun) (void);
-   char *err;
-   char filebuf[1024];
-   char *fun_name;
-
-   if (NULL != find_handle (name))
-     return 0;			       /* already loaded */
-
-   while (1)
-     {
-#ifndef RTLD_GLOBAL
-# define RTLD_GLOBAL 0
-#endif
-#ifdef RTLD_NOW
-	handle = (VOID_STAR) dlopen (file, RTLD_NOW | RTLD_GLOBAL);
-#else
-	handle = (VOID_STAR) dlopen (file, RTLD_LAZY | RTLD_GLOBAL);
-#endif
-
-	if (handle != NULL)
-	  break;
-
-	if (NULL == strchr (file, '/'))
-	  {
-	     _SLsnprintf (filebuf, sizeof (filebuf), "./%s", file);
-	     file = filebuf;
-	     continue;
-	  }
-
-	if (NULL == (err = (char *) dlerror ()))
-	  err = "UNKNOWN";
-
-	SLang_verror (SL_INTRINSIC_ERROR,
-		      "Error linking to %s: %s", file, err);
-	return -1;
-     }
-
-   fun_name = ns_init_fun_name;
-   ns_init_fun = (int (*)(char *)) dlsym (handle, fun_name);
-   if (ns_init_fun == NULL) 
-     {
-	if ((ns != NULL) 
-	    && (0 != strcmp (ns, "Global")))
-	  goto return_error;
-	
-	fun_name = init_fun_name;
-	init_fun = (int (*)(void)) dlsym (handle, fun_name);
-	if (init_fun == NULL)
-	  goto return_error;
-	
-	if (-1 == (*init_fun) ())
-	  {
-	     dlclose (handle);
-	     return -1;
-	  }
-     }
-   else if (-1 == (*ns_init_fun) (ns))
-     {
-	dlclose (handle);
-	return -1;
-     }
-
-
-   deinit_fun = (void (*)(void)) dlsym (handle, deinit_fun_name);
-
-   (void) save_handle (name, handle, deinit_fun);
-   return 0;
-
-   return_error:
-   
-   if (NULL == (err = (char *) dlerror ()))
-     err = "UNKNOWN";
-
-   dlclose (handle);
-   SLang_verror (SL_INTRINSIC_ERROR,
-		 "Unable to get symbol %s from %s: %s",
-		 name, file, err);
-   return -1;
-}
-
-static void import_module (void)
-{
-   char module_name[256];
-   char symbol_name[256];
-   char deinit_name[256];
-   char ns_init_name[256];
-   char *path;
-   char *file;
-   char *module;
-   char *ns = NULL;
-
-   if (SLang_Num_Function_Args == 2)
-     {
-	if (-1 == SLang_pop_slstring (&ns))
-	  return;	
-     }
-   
-   if (-1 == SLang_pop_slstring (&module))
-     {
-	SLang_free_slstring (ns);      /* NULL ok */
-	return;
-     }
-
-   _SLsnprintf (symbol_name, sizeof(symbol_name), "init_%s_module", module);
-   _SLsnprintf (module_name, sizeof(module_name), "%s-module.so", module);
-   _SLsnprintf (deinit_name, sizeof(deinit_name), "deinit_%s_module", module);
-   _SLsnprintf (ns_init_name, sizeof (ns_init_name), "init_%s_module_ns", module);
-
-   if (Module_Path != NULL)
-     file = SLpath_find_file_in_path (Module_Path, module_name);
-   else file = NULL;
-
-   if ((file == NULL)
-       && (NULL != (path = getenv (MODULE_PATH_ENV_NAME))))
-     file = SLpath_find_file_in_path (path, module_name);
-
-   if (file == NULL)
-     file = SLpath_find_file_in_path (MODULE_INSTALL_DIR, module_name);
-
-   if (file != NULL)
-     {
-	(void) import_from_library (symbol_name, symbol_name, deinit_name, file, ns, ns_init_name);
-	SLfree (file);
-     }
-   else
-     {
-	/* Maybe the system loader can find it in LD_LIBRARY_PATH */
-	(void) import_from_library (symbol_name, symbol_name, deinit_name, module_name, ns, ns_init_name);
-     }
-}
-
-static void set_import_module_path (char *path)
-{
-   (void) SLang_set_module_load_path (path);
-}
-
-static char *get_import_module_path (void)
-{
-   char *path;
-   if (Module_Path != NULL)
-     return Module_Path;
-   if (NULL != (path = getenv (MODULE_PATH_ENV_NAME)))
-     return path;
-   return MODULE_INSTALL_DIR;
-}
-
-static SLang_Intrin_Fun_Type Module_Intrins [] =
-{
-   MAKE_INTRINSIC_0("import", import_module, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("set_import_module_path", set_import_module_path, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("get_import_module_path", get_import_module_path, SLANG_STRING_TYPE),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-#endif				       /* SLANG_HAS_DYNAMIC_LINKING */
-
-int SLang_set_module_load_path (char *path)
-{
-#if SLANG_HAS_DYNAMIC_LINKING
-   if (NULL == (path = SLang_create_slstring (path)))
-     return -1;
-   SLang_free_slstring (Module_Path);
-   Module_Path = path;
-   return 0;
-#else
-   (void) path;
-   return -1;
-#endif
-}
-
-int SLang_init_import (void)
-{
-#if SLANG_HAS_DYNAMIC_LINKING
-   (void) SLang_add_cleanup_function (delete_handles);
-   return SLadd_intrin_fun_table (Module_Intrins, "__IMPORT__");
-#else
-   return 0;
-#endif
-}
diff --git a/mdk-stage1/slang/slinclud.h b/mdk-stage1/slang/slinclud.h
deleted file mode 100644
index d60a4423e..000000000
--- a/mdk-stage1/slang/slinclud.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _SLANG_INCLUDE_H_
-#define _SLANG_INCLUDE_H_
-
-#include "config.h"
-#include "sl-feat.h"
-
-#include <stdio.h>
-#include <string.h>
-
-#ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif
-
-#ifdef HAVE_MALLOC_H
-# include <malloc.h>
-#endif
-
-#ifdef HAVE_MEMORY_H
-# include <memory.h>
-#endif
-
-#endif				       /* _SLANG_INCLUDE_H_ */
diff --git a/mdk-stage1/slang/slintall.c b/mdk-stage1/slang/slintall.c
deleted file mode 100644
index a66b9d6d2..000000000
--- a/mdk-stage1/slang/slintall.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-int SLang_init_all (void)
-{
-   if ((-1 == SLang_init_slang ())
-       || (-1 == SLang_init_slmath ())
-       || (-1 == SLang_init_posix_dir ())
-       || (-1 == SLang_init_posix_process ())
-       || (-1 == SLang_init_stdio ())
-       || (-1 == SLang_init_array ())
-       || (-1 == SLang_init_posix_io ())
-       || (-1 == SLang_init_ospath ())
-       )
-     return -1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slistruc.c b/mdk-stage1/slang/slistruc.c
deleted file mode 100644
index 06b8fd6ff..000000000
--- a/mdk-stage1/slang/slistruc.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/* Intrinsic Structure type implementation */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/* Intrinsic structures */
-
-typedef struct
-{
-   char *name;
-   VOID_STAR addr;
-   SLang_IStruct_Field_Type *fields;
-}
-_SLang_IStruct_Type;
-
-static SLang_IStruct_Field_Type *istruct_pop_field (char *name, int no_readonly, VOID_STAR *addr)
-{
-   _SLang_IStruct_Type *s;
-   SLang_IStruct_Field_Type *f;
-   char *struct_addr;
-
-   /* Note: There is no need to free this object */
-   if (-1 == SLclass_pop_ptr_obj (SLANG_ISTRUCT_TYPE, (VOID_STAR *) &s))
-     return NULL;
-
-   if (NULL == (struct_addr = *(char **)s->addr))
-     {
-	SLang_verror (SL_INTRINSIC_ERROR,
-		      "%s is NULL.  Unable to access field", s->name);
-	return NULL;
-     }
-
-   f = s->fields;
-   while (f->field_name != NULL)
-     {
-	/* Since both these are slstrings, just test pointers */
-	if (f->field_name != name)
-	  {
-	     f++;
-	     continue;
-	  }
-
-	if (no_readonly && f->read_only)
-	  {
-	     SLang_verror (SL_READONLY_ERROR,
-			   "%s.%s is read-only", s->name, name);
-	     return NULL;
-	  }
-
-	*addr = (VOID_STAR) (struct_addr + f->offset);
-	return f;
-     }
-
-   SLang_verror (SL_TYPE_MISMATCH,
-		 "%s has no field called %s", s->name, name);
-   return NULL;
-}
-
-static int istruct_sget (unsigned char type, char *name)
-{
-   SLang_IStruct_Field_Type *f;
-   VOID_STAR addr;
-   SLang_Class_Type *cl;
-
-   if (NULL == (f = istruct_pop_field (name, 0, &addr)))
-     return -1;
-
-   type = f->type;
-   cl = _SLclass_get_class (type);
-
-   return (cl->cl_push_intrinsic)(f->type, addr);
-}
-
-static int istruct_sput (unsigned char type, char *name)
-{
-   SLang_IStruct_Field_Type *f;
-   VOID_STAR addr;
-   SLang_Class_Type *cl;
-
-   if (NULL == (f = istruct_pop_field (name, 1, &addr)))
-     return -1;
-
-   type = f->type;
-   cl = _SLclass_get_class (type);
-
-   return (*cl->cl_pop) (type, addr);
-}
-
-static int istruct_push (unsigned char type, VOID_STAR ptr)
-{
-   _SLang_IStruct_Type *s;
-
-   s = *(_SLang_IStruct_Type **) ptr;
-   if ((s == NULL) 
-       || (s->addr == NULL)
-       || (*(char **) s->addr == NULL))
-     return SLang_push_null ();
-
-   return SLclass_push_ptr_obj (type, (VOID_STAR) s);
-}
-
-static int istruct_pop (unsigned char type, VOID_STAR ptr)
-{
-   return SLclass_pop_ptr_obj (type, (VOID_STAR *)ptr);
-}
-
-static void istruct_destroy (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   (void) ptr;
-}
-
-/* Intrinsic struct objects are not stored in a variable. So, the address that
- * is passed here is actually a pointer to the struct.  So, pass its address
- * to istruct_push since v is a variable.  Confusing, n'est pas?
- */
-static int istruct_push_intrinsic (unsigned char type, VOID_STAR v)
-{
-   return istruct_push (type, (VOID_STAR) &v);
-}
-
-static int init_intrin_struct (void)
-{
-   SLang_Class_Type *cl;
-   static int initialized;
-
-   if (initialized)
-     return 0;
-
-   if (NULL == (cl = SLclass_allocate_class ("IStruct_Type")))
-     return -1;
-
-   cl->cl_pop = istruct_pop;
-   cl->cl_push = istruct_push;
-   cl->cl_sget = istruct_sget;
-   cl->cl_sput = istruct_sput;
-   cl->cl_destroy = istruct_destroy;
-   cl->cl_push_intrinsic = istruct_push_intrinsic;
-
-   if (-1 == SLclass_register_class (cl, SLANG_ISTRUCT_TYPE, sizeof (_SLang_IStruct_Type *),
-				     SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   initialized = 1;
-   return 0;
-}
-
-int SLadd_istruct_table (SLang_IStruct_Field_Type *fields, VOID_STAR addr, char *name)
-{
-   _SLang_IStruct_Type *s;
-   SLang_IStruct_Field_Type *f;
-
-   if (-1 == init_intrin_struct ())
-     return -1;
-
-   if (addr == NULL)
-     {
-	SLang_verror (SL_INVALID_PARM,
-		      "SLadd_istruct_table: address must be non-NULL");
-	return -1;
-     }
-
-   if (fields == NULL)
-     return -1;
-
-   /* Make the field names slstrings so that only the pointers need to be
-    * compared.  However, this table may have been already been added for
-    * another instance of the intrinsic object.  So, check for the presence
-    * of an slstring.
-    */
-   f = fields;
-   while (f->field_name != NULL)
-     {
-	char *fname;
-
-	fname = SLang_create_slstring (f->field_name);
-	if (fname == NULL)
-	  return -1;
-
-	/* Here is the check for the slstring */
-	if (f->field_name == fname)
-	  SLang_free_slstring (fname);
-	else /* replace string literal with slstring */
-	  f->field_name = fname;
-
-	f++;
-     }
-
-   s = (_SLang_IStruct_Type *)SLmalloc (sizeof (_SLang_IStruct_Type));
-   if (s == NULL)
-     return -1;
-
-   memset ((char *)s, 0, sizeof (_SLang_IStruct_Type));
-   if (NULL == (s->name = SLang_create_slstring (name)))
-     {
-	SLfree ((char *) s);
-	return -1;
-     }
-
-   s->addr = addr;
-   s->fields = fields;
-
-   if (-1 == SLadd_intrinsic_variable (name, (VOID_STAR) s, SLANG_ISTRUCT_TYPE, 1))
-     {
-	SLang_free_slstring (s->name);
-	SLfree ((char *) s);
-	return -1;
-     }
-
-   return 0;
-}
diff --git a/mdk-stage1/slang/slkeymap.c b/mdk-stage1/slang/slkeymap.c
deleted file mode 100644
index dff65433e..000000000
--- a/mdk-stage1/slang/slkeymap.c
+++ /dev/null
@@ -1,596 +0,0 @@
-/* Keymap routines for SLang.  The role of these keymap routines is simple:
- * Just read keys from the tty and return a pointer to a keymap structure.
- * That is, a keymap is simple a mapping of strings (keys from tty) to
- * structures.  Also included are routines for managing the keymaps.
- */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/* We need a define a rule for upperand lower case chars that user cannot
-   change!  This could be a problem for international chars! */
-
-#define UPPER_CASE_KEY(x) (((x) >= 'a') && ((x) <= 'z') ? (x) - 32 : (x))
-#define LOWER_CASE_KEY(x) (((x) >= 'A') && ((x) <= 'Z') ? (x) + 32 : (x))
-
-int SLang_Key_TimeOut_Flag = 0;	       /* true if more than 1 sec has elapsed
-                                          without key in multikey sequence */
-
-int SLang_Last_Key_Char;
-
-SLKeyMap_List_Type SLKeyMap_List[SLANG_MAX_KEYMAPS];
-
-static SLang_Key_Type *malloc_key(unsigned char *str)
-{
-   SLang_Key_Type *neew;
-
-   if (NULL == (neew = (SLang_Key_Type *) SLmalloc(sizeof(SLang_Key_Type))))
-     return NULL;
-
-   SLMEMSET ((char *) neew, 0, sizeof (SLang_Key_Type));
-   SLMEMCPY((char *) neew->str, (char *) str, (unsigned int) *str);
-   return(neew);
-}
-
-static SLKeyMap_List_Type *add_keymap (char *name, SLang_Key_Type *map)
-{
-   int i;
-
-   for (i = 0; i < SLANG_MAX_KEYMAPS; i++)
-     {
-	if (SLKeyMap_List[i].keymap == NULL)
-	  {
-	     if (NULL == (name = SLang_create_slstring (name)))
-	       return NULL;
-
-	     SLKeyMap_List[i].keymap = map;
-	     SLKeyMap_List[i].name = name;
-	     return &SLKeyMap_List[i];
-	  }
-     }
-   SLang_Error = SL_UNKNOWN_ERROR;
-   /* SLang_doerror ("Keymap quota exceeded."); */
-   return NULL;
-}
-
-FVOID_STAR SLang_find_key_function(char *name, SLKeyMap_List_Type *keymap)
-{
-   SLKeymap_Function_Type *fp = keymap -> functions;
-   char ch = *name;
-
-   while ((fp != NULL) && (fp->name != NULL))
-     {
-	if ((ch == *fp->name)
-	    && (0 == strcmp(fp->name, name)))
-	  return (FVOID_STAR) fp->f;
-
-	fp++;
-     }
-   return NULL;
-}
-
-#ifdef REAL_UNIX_SYSTEM
-/* Expand termcap string specified by s.  s as passed will have the format:
- *   "XY)..."  where XY represents a termcap keyname.
- */
-static char *process_termcap_string (char *s, char *str, int *ip, int imax)
-{
-   char c[3], *val;
-   int i;
-
-   if ((0 == (c[0] = s[0]))
-       || (0 == (c[1] = s[1]))
-       || (s[2] != ')'))
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "setkey: ^(%s is badly formed", s);
-	return NULL;
-     }
-   s += 3;
-
-   c[2] = 0;
-   if ((NULL == (val = SLtt_tgetstr (c)))
-       || (*val == 0))
-     return NULL;
-
-   i = *ip;
-   while ((i < imax) && (*val != 0))
-     {
-	str[i++] = *val++;
-     }
-   *ip = i;
-
-   return s;
-}
-#endif
-
-/* convert things like "^A" to 1 etc... The 0th char is the strlen INCLUDING
- * the length character itself.
- */
-char *SLang_process_keystring(char *s)
-{
-   /* FIXME: v2.0, make this thread safe */
-   static char str[32];
-   unsigned char ch;
-   int i;
-
-   i = 1;
-   while (*s != 0)
-     {
-	ch = (unsigned char) *s++;
-	if (ch == '^')
-	  {
-	     ch = *s++;
-	     if (ch == 0)
-	       {
-		  if (i < 32)
-		    str[i++] = '^';
-		  break;
-	       }
-#ifdef REAL_UNIX_SYSTEM
-	     if (ch == '(')
-	       {
-		  s = process_termcap_string (s, str, &i, 32);
-		  if (s == NULL)
-		    {
-		       str[0] = 1;
-		       return str;
-		    }
-		  continue;
-	       }
-#endif
-	     ch = UPPER_CASE_KEY(ch);
-	     if (ch == '?') ch = 127; else ch = ch - 'A' + 1;
-	  }
-
-	if (i >= 32) break;
-	str[i++] = ch;
-     }
-
-   if (i > SLANG_MAX_KEYMAP_KEY_SEQ)
-     {
-	SLang_verror (SL_INVALID_PARM, "Key sequence is too long");
-	return NULL;
-     }
-
-   str[0] = i;
-   return(str);
-}
-
-static int key_string_compare (unsigned char *a, unsigned char *b, unsigned int len)
-{
-   unsigned char *amax = a + len;
-   int cha, chb, cha_up, chb_up;
-
-   while (a < amax)
-     {
-	cha = *a++;
-	chb = *b++;
-
-	if (cha == chb) continue;
-
-	cha_up = UPPER_CASE_KEY(cha);
-	chb_up = UPPER_CASE_KEY(chb);
-
-	if (cha_up == chb_up)
-	  {
-	     /* Use case-sensitive result. */
-	     return cha - chb;
-	  }
-	/* Use case-insensitive result. */
-	return cha_up - chb_up;
-     }
-   return 0;
-}
-
-static char *Define_Key_Error = "Inconsistency in define key.";
-
-/* This function also performs an insertion in an ordered way. */
-static int find_the_key (char *s, SLKeyMap_List_Type *kml, SLang_Key_Type **keyp)
-{
-   unsigned char ch;
-   unsigned int str_len;
-   SLang_Key_Type *key, *last, *neew;
-   unsigned char *str;
-
-   *keyp = NULL;
-
-   if (NULL == (str = (unsigned char *) SLang_process_keystring(s)))
-     return -2;
-
-   if (1 == (str_len = str[0]))
-     return 0;
-
-   ch = str[1];
-   key = kml->keymap + ch;
-
-   if (str_len == 2)
-     {
-	if (key->next != NULL)
-	  {
-	     SLang_doerror (Define_Key_Error);
-	     return -2;
-	  }
-
-	if (key->type == SLKEY_F_INTERPRET)
-	  SLang_free_slstring (key->f.s);
-
-	key->str[0] = str_len;
-	key->str[1] = ch;
-
-	*keyp = key;
-	return 0;
-     }
-
-   /* insert the key definition */
-   while (1)
-     {
-	int cmp;
-	unsigned int key_len, len;
-
-	last = key;
-	key = key->next;
-
-	if ((key != NULL) && (key->str != NULL))
-	  {
-	     len = key_len = key->str[0];
-	     if (len > str_len) len = str_len;
-
-	     cmp = key_string_compare (str + 1, key->str + 1, len - 1);
-
-	     if (cmp > 0)
-	       continue;
-
-	     if (cmp == 0)
-	       {
-		  if (key_len != str_len)
-		    {
-		       SLang_doerror (Define_Key_Error);
-		       return -2;
-		    }
-
-		  if (key->type == SLKEY_F_INTERPRET)
-		    SLang_free_slstring (key->f.s);
-
-		  *keyp = key;
-		  return 0;
-	       }
-	     /* Drop to cmp < 0 case */
-	  }
-
-	if (NULL == (neew = malloc_key(str))) return -1;
-
-	neew -> next = key;
-	last -> next = neew;
-
-	*keyp = neew;
-	return 0;
-     }
-}
-
-/* returns -2 if inconsistent, -1 if malloc error, 0 upon success */
-int SLkm_define_key (char *s, FVOID_STAR f, SLKeyMap_List_Type *kml)
-{
-   SLang_Key_Type *key;
-   unsigned int type = SLKEY_F_INTRINSIC;
-   int ret;
-
-   ret = find_the_key (s, kml, &key);
-   if ((ret != 0) || (key == NULL))
-     return ret;
-
-   key->type = type;
-   key->f.f = f;
-   return 0;
-}
-
-int SLang_define_key (char *s, char *funct, SLKeyMap_List_Type *kml)
-{
-   SLang_Key_Type *key;
-   FVOID_STAR f;
-   int ret;
-
-   ret = find_the_key (s, kml, &key);
-   if ((ret != 0) || (key == NULL))
-     return ret;
-
-   f = SLang_find_key_function(funct, kml);
-
-   if (f == NULL)                      /* assume interpreted */
-     {
-	char *str = SLang_create_slstring (funct);
-	if (str == NULL) return -1;
-	key->type = SLKEY_F_INTERPRET;
-	key->f.s = str;
-     }
-   else
-     {
-	key->type = SLKEY_F_INTRINSIC;
-	key->f.f = f;
-     }
-   return 0;
-}
-
-int SLkm_define_keysym (char *s, unsigned int keysym, SLKeyMap_List_Type *kml)
-{
-   SLang_Key_Type *key;
-   int ret;
-
-   ret = find_the_key (s, kml, &key);
-
-   if ((ret != 0) || (key == NULL))
-     return ret;
-
-   key->type = SLKEY_F_KEYSYM;
-   key->f.keysym = keysym;
-   return 0;
-}
-
-SLang_Key_Type *SLang_do_key(SLKeyMap_List_Type *kml, int (*getkey)(void))
-{
-   register SLang_Key_Type *key, *next, *kmax;
-   unsigned int len;
-   unsigned char input_ch;
-   register unsigned char chup, chlow;
-   unsigned char key_ch = 0;
-
-   SLang_Last_Key_Char = (*getkey)();
-   SLang_Key_TimeOut_Flag = 0;
-
-   if (SLANG_GETKEY_ERROR == (unsigned int) SLang_Last_Key_Char)
-     return NULL;
-
-   input_ch = (unsigned char) SLang_Last_Key_Char;
-
-   key = (SLang_Key_Type *) &((kml->keymap)[input_ch]);
-
-   /* if the next one is null, then we know this MAY be it. */
-   while (key->next == NULL)
-     {
-	if (key->type != 0)
-	  return key;
-
-	/* Try its opposite case counterpart */
-	chlow = LOWER_CASE_KEY(input_ch);
-	if (input_ch == chlow)
-	  input_ch = UPPER_CASE_KEY(input_ch);
-
-	key = kml->keymap + input_ch;
-	if (key->type == 0)
-	  return NULL;
-     }
-
-   /* It appears to be a prefix character in a key sequence. */
-
-   len = 1;			       /* already read one character */
-   key = key->next;		       /* Now we are in the key list */
-   kmax = NULL;			       /* set to end of list */
-
-   while (1)
-     {
-	SLang_Key_TimeOut_Flag = 1;
-	SLang_Last_Key_Char = (*getkey)();
-	SLang_Key_TimeOut_Flag = 0;
-
-	len++;
-
-	if ((SLANG_GETKEY_ERROR == (unsigned int) SLang_Last_Key_Char)
-	    || SLKeyBoard_Quit)
-	  break;
-
-	input_ch = (unsigned char) SLang_Last_Key_Char;
-
-	chup = UPPER_CASE_KEY(input_ch); chlow = LOWER_CASE_KEY(input_ch);
-
-	while (key != kmax)
-	  {
-	     if (key->str[0] > len)
-	       {
-		  key_ch = key->str[len];
-		  if (chup == UPPER_CASE_KEY(key_ch))
-		    break;
-	       }
-	     key = key->next;
-	  }
-
-	if (key == kmax) break;
-
-	/* If the input character is lowercase, check to see if there is
-	 * a lowercase match.  If so, set key to it.  Note: the
-	 * algorithm assumes the sorting performed by key_string_compare.
-	 */
-	if (input_ch != key_ch)
-	  {
-	     next = key->next;
-	     while (next != kmax)
-	       {
-		  if (next->str[0] > len)
-		    {
-		       unsigned char next_ch = next->str[len];
-		       if (next_ch == input_ch)
-			 {
-			    key = next;
-			    break;
-			 }
-		       if (next_ch != chup)
-			 break;
-		    }
-		  next = next->next;
-	       }
-	  }
-
-	/* Ok, we found the first position of a possible match.  If it
-	 * is exact, we are done.
-	 */
-	if ((unsigned int) key->str[0] == len + 1)
-	  return key;
-
-	/* Apparantly, there are some ambiguities. Read next key to resolve
-	 * the ambiguity.  Adjust kmax to encompass ambiguities.
-	 */
-
-	next = key->next;
-	while (next != kmax)
-	  {
-	     if ((unsigned int) next->str[0] > len)
-	       {
-		  key_ch = next->str[len];
-		  if (chup != UPPER_CASE_KEY(key_ch))
-		    break;
-	       }
-	     next = next->next;
-	  }
-	kmax = next;
-     }
-
-   return NULL;
-}
-
-void SLang_undefine_key(char *s, SLKeyMap_List_Type *kml)
-{
-   int n, i;
-   SLang_Key_Type *key, *next, *last, *key_root, *keymap;
-   unsigned char *str;
-
-   keymap = kml -> keymap;
-   if (NULL == (str = (unsigned char *) SLang_process_keystring(s)))
-     return;
-
-   if (0 == (n = *str++ - 1)) return;
-   i = *str;
-
-   last = key_root = (SLang_Key_Type *) &(keymap[i]);
-   key = key_root->next;
-
-   while (key != NULL)
-     {
-	next = key->next;
-	if (0 == SLMEMCMP ((char *)(key->str + 1), (char *) str, n))
-	  {
-	     if (key->type == SLKEY_F_INTERPRET)
-	       SLang_free_slstring (key->f.s);
-
-	     SLfree((char *) key);
-	     last->next = next;
-	  }
-	else last = key;
-	key = next;
-     }
-
-   if (n == 1)
-     {
-	*key_root->str = 0;
-	key_root->f.f = NULL;
-	key_root->type = 0;
-     }
-}
-
-char *SLang_make_keystring(unsigned char *s)
-{
-   static char buf [3 * SLANG_MAX_KEYMAP_KEY_SEQ + 1];
-   char *b;
-   int n;
-
-   n = *s++ - 1;
-
-   if (n > SLANG_MAX_KEYMAP_KEY_SEQ)
-     {
-	SLang_verror (SL_INVALID_PARM, "Key sequence is too long");
-	return NULL;
-     }
-
-   b = buf;
-   while (n--)
-     {
-	if (*s < 32)
-	  {
-	     *b++ = '^';
-	     *b++ = *s + 'A' - 1;
-	  }
-	else *b++ = *s;
-	s++;
-     }
-   *b = 0;
-   return(buf);
-}
-
-static SLang_Key_Type *copy_keymap(SLKeyMap_List_Type *kml)
-{
-   int i;
-   SLang_Key_Type *neew, *old, *new_root, *km;
-
-   if (NULL == (new_root = (SLang_Key_Type *) SLcalloc(256, sizeof(SLang_Key_Type))))
-     return NULL;
-
-   if (kml == NULL) return new_root;
-   km = kml->keymap;
-
-   for (i = 0; i < 256; i++)
-     {
-	old = &(km[i]);
-	neew = &(new_root[i]);
-
-	if (old->type == SLKEY_F_INTERPRET)
-	  neew->f.s = SLang_create_slstring (old->f.s);
-	else
-	  neew->f.f = old->f.f;
-
-	neew->type = old->type;
-	SLMEMCPY((char *) neew->str, (char *) old->str, (unsigned int) *old->str);
-
-	old = old->next;
-	while (old != NULL)
-	  {
-	     neew->next = malloc_key((unsigned char *) old->str);
-	     neew = neew->next;
-
-	     if (old->type == SLKEY_F_INTERPRET)
-	       neew->f.s = SLang_create_slstring (old->f.s);
-	     else
-	       neew->f.f = old->f.f;
-
-	     neew->type = old->type;
-	     old = old->next;
-	  }
-	neew->next = NULL;
-     }
-   return(new_root);
-}
-
-SLKeyMap_List_Type *SLang_create_keymap(char *name, SLKeyMap_List_Type *map)
-{
-   SLang_Key_Type *neew;
-   SLKeyMap_List_Type *new_map;
-
-   if ((NULL == (neew = copy_keymap(map)))
-       || (NULL == (new_map = add_keymap(name, neew)))) return NULL;
-
-   if (map != NULL) new_map -> functions = map -> functions;
-
-   return new_map;
-}
-
-SLKeyMap_List_Type *SLang_find_keymap(char *name)
-{
-   SLKeyMap_List_Type *kmap, *kmap_max;
-
-   kmap = SLKeyMap_List;
-   kmap_max = kmap + SLANG_MAX_KEYMAPS;
-
-   while (kmap < kmap_max)
-     {
-	if ((kmap->name != NULL)
-	    && (0 == strcmp (kmap->name, name)))
-	  return kmap;
-
-	kmap++;
-     }
-   return NULL;
-}
diff --git a/mdk-stage1/slang/slkeypad.c b/mdk-stage1/slang/slkeypad.c
deleted file mode 100644
index 524dc80fa..000000000
--- a/mdk-stage1/slang/slkeypad.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static SLKeyMap_List_Type *Keymap_List;
-
-int SLkp_init (void)
-{
-   char esc_seq[10];
-   int i;
-
-   if (NULL == (Keymap_List = SLang_create_keymap ("_SLKeypad", NULL)))
-     return -1;
-
-   esc_seq[1] = 0;
-   for (i = 1; i < 256; i++)
-     {
-	esc_seq[0] = (char) i;
-	SLkm_define_keysym (esc_seq, i, Keymap_List);
-     }
-
-   /* Now add most common ones. */
-#ifndef IBMPC_SYSTEM
-   SLkm_define_keysym ("^@", 0, Keymap_List);
-
-   SLkm_define_keysym ("\033[A", SL_KEY_UP, Keymap_List);
-   SLkm_define_keysym ("\033OA", SL_KEY_UP, Keymap_List);
-   SLkm_define_keysym ("\033[B", SL_KEY_DOWN, Keymap_List);
-   SLkm_define_keysym ("\033OB", SL_KEY_DOWN, Keymap_List);
-   SLkm_define_keysym ("\033[C", SL_KEY_RIGHT, Keymap_List);
-   SLkm_define_keysym ("\033OC", SL_KEY_RIGHT, Keymap_List);
-   SLkm_define_keysym ("\033[D", SL_KEY_LEFT, Keymap_List);
-   SLkm_define_keysym ("\033OD", SL_KEY_LEFT, Keymap_List);
-   SLkm_define_keysym ("\033[2~", SL_KEY_IC, Keymap_List);
-   SLkm_define_keysym ("\033[7~", SL_KEY_HOME, Keymap_List);
-   SLkm_define_keysym ("\033[5~", SL_KEY_PPAGE, Keymap_List);
-   SLkm_define_keysym ("\033[6~", SL_KEY_NPAGE, Keymap_List);
-   SLkm_define_keysym ("\033[8~", SL_KEY_END, Keymap_List);
-   SLkm_define_keysym ("\033[3~", SL_KEY_DELETE, Keymap_List);
-#else
-   /* Note: This will not work if SLgetkey_map_to_ansi (1) has
-    * been called.
-    */
-   SLkm_define_keysym ("^@\x48", SL_KEY_UP, Keymap_List );
-   SLkm_define_keysym ("^@\x50", SL_KEY_DOWN, Keymap_List );
-   SLkm_define_keysym ("^@\x4d", SL_KEY_RIGHT, Keymap_List );
-   SLkm_define_keysym ("^@\x4b", SL_KEY_LEFT, Keymap_List );
-   SLkm_define_keysym ("^@\x47", SL_KEY_HOME, Keymap_List );
-   SLkm_define_keysym ("^@\x49", SL_KEY_PPAGE, Keymap_List );
-   SLkm_define_keysym ("^@\x51", SL_KEY_NPAGE, Keymap_List );
-   SLkm_define_keysym ("^@\x4f", SL_KEY_END, Keymap_List );
-   SLkm_define_keysym ("^@\x52", SL_KEY_IC, Keymap_List );
-   SLkm_define_keysym ("^@\x53", SL_KEY_DELETE, Keymap_List );
-   
-   SLkm_define_keysym ("\xE0\x48", SL_KEY_UP, Keymap_List );
-   SLkm_define_keysym ("\xE0\x50", SL_KEY_DOWN, Keymap_List );
-   SLkm_define_keysym ("\xE0\x4d", SL_KEY_RIGHT, Keymap_List );
-   SLkm_define_keysym ("\xE0\x4b", SL_KEY_LEFT, Keymap_List );
-   SLkm_define_keysym ("\xE0\x47", SL_KEY_HOME, Keymap_List );
-   SLkm_define_keysym ("\xE0\x49", SL_KEY_PPAGE, Keymap_List );
-   SLkm_define_keysym ("\xE0\x51", SL_KEY_NPAGE, Keymap_List );
-   SLkm_define_keysym ("\xE0\x4f", SL_KEY_END, Keymap_List );
-   SLkm_define_keysym ("\xE0\x52", SL_KEY_IC, Keymap_List );
-   SLkm_define_keysym ("\xE0\x53", SL_KEY_DELETE, Keymap_List );
-
-    strcpy (esc_seq, "^@ ");	       /* guarantees esc_seq[3] = 0. */
-
-    for (i = 0x3b; i < 0x45; i++)
-      {
-	 esc_seq [2] = i;
-	 SLkm_define_keysym (esc_seq, SL_KEY_F(i - 0x3a), Keymap_List);
-      }
-   esc_seq[2] = 0x57; SLkm_define_keysym (esc_seq, SL_KEY_F(11), Keymap_List);
-   esc_seq[2] = 0x58; SLkm_define_keysym (esc_seq, SL_KEY_F(12), Keymap_List);
-#endif
-
-#ifdef REAL_UNIX_SYSTEM
-   strcpy (esc_seq, "^(kX)");
-   for (i = 0; i <= 9; i++)
-     {
-	esc_seq[3] = '0' + i;
-	SLkm_define_keysym (esc_seq, SL_KEY_F(i), Keymap_List);
-     }
-   SLkm_define_keysym ("^(k;)", SL_KEY_F(10), Keymap_List);
-
-   SLkm_define_keysym ("^(ku)", SL_KEY_UP, Keymap_List);
-   SLkm_define_keysym ("^(kd)", SL_KEY_DOWN, Keymap_List);
-   SLkm_define_keysym ("^(kl)", SL_KEY_LEFT, Keymap_List);
-   SLkm_define_keysym ("^(kr)", SL_KEY_RIGHT, Keymap_List);
-   SLkm_define_keysym ("^(kP)", SL_KEY_PPAGE, Keymap_List);
-   SLkm_define_keysym ("^(kN)", SL_KEY_NPAGE, Keymap_List);
-   SLkm_define_keysym ("^(kh)", SL_KEY_HOME, Keymap_List);
-   SLkm_define_keysym ("^(@7)", SL_KEY_END, Keymap_List);
-   SLkm_define_keysym ("^(K1)", SL_KEY_A1, Keymap_List);
-   SLkm_define_keysym ("^(K3)", SL_KEY_A3, Keymap_List);
-   SLkm_define_keysym ("^(K2)", SL_KEY_B2, Keymap_List);
-   SLkm_define_keysym ("^(K4)", SL_KEY_C1, Keymap_List);
-   SLkm_define_keysym ("^(K5)", SL_KEY_C3, Keymap_List);
-   SLkm_define_keysym ("^(%0)", SL_KEY_REDO, Keymap_List);
-   SLkm_define_keysym ("^(&8)", SL_KEY_UNDO, Keymap_List);
-   SLkm_define_keysym ("^(kb)", SL_KEY_BACKSPACE, Keymap_List);
-   SLkm_define_keysym ("^(@8)", SL_KEY_ENTER, Keymap_List);
-   SLkm_define_keysym ("^(kD)", SL_KEY_DELETE, Keymap_List);
-#endif
-
-   if (SLang_Error)
-     return -1;
-   return 0;
-}
-
-int SLkp_getkey (void)
-{
-   SLang_Key_Type *key;
-
-   key = SLang_do_key (Keymap_List, (int (*)(void)) SLang_getkey);
-   if ((key == NULL) || (key->type != SLKEY_F_KEYSYM))
-     {
-	SLang_flush_input ();
-	return SL_KEY_ERR;
-     }
-
-   return key->f.keysym;
-}
-
-int SLkp_define_keysym (char *keystr, unsigned int keysym)
-{
-   if (SLkm_define_keysym (keystr, keysym, Keymap_List) < 0)
-     return -1;
-
-   return 0;
-}
-
-#if 0
-int main (int argc, char **argv)
-{
-   int ch;
-
-   SLtt_get_terminfo ();
-
-   if (-1 == SLkp_init ())
-     return 1;
-
-   SLang_init_tty (-1, 0, 0);
-
-   while ('q' != (ch = SLkp_getkey ()))
-     {
-	fprintf (stdout, "Keycode = %d\r\n", ch);
-	fflush (stdout);
-     }
-
-   SLang_reset_tty ();
-
-   return 0;
-}
-#endif
-
diff --git a/mdk-stage1/slang/sllimits.h b/mdk-stage1/slang/sllimits.h
deleted file mode 100644
index c4ae03b83..000000000
--- a/mdk-stage1/slang/sllimits.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-/* sllimits.h */
-
-/* slstring.c: Size of the hash table used for strings (prime numbers) */
-#ifdef __MSDOS_16BIT__
-# define SLSTRING_HASH_TABLE_SIZE	601
-# define SLASSOC_HASH_TABLE_SIZE	601
-#else
-# define SLSTRING_HASH_TABLE_SIZE	2909
-# define SLASSOC_HASH_TABLE_SIZE 	2909
-#endif
-
-/* slang.c: maximum size of run time stack */
-#ifdef __MSDOS_16BIT__
-# define SLANG_MAX_STACK_LEN		500
-#else
-# define SLANG_MAX_STACK_LEN		2500
-#endif
-
-/* slang.c: This sets the size on the depth of function calls */
-#ifdef __MSDOS_16BIT__
-# define SLANG_MAX_RECURSIVE_DEPTH	50
-#else
-# define SLANG_MAX_RECURSIVE_DEPTH	250
-#endif
-
-/* slang.c: Size of the stack used for local variables */
-#ifdef __MSDOS_16BIT__
-# define SLANG_MAX_LOCAL_STACK		200
-#else
-# define SLANG_MAX_LOCAL_STACK		1024
-#endif
-
-/* slang.c: The size of the hash table used for local and global objects.
- * These should be prime numbers.
- */
-#define SLGLOBALS_HASH_TABLE_SIZE	2909
-#define SLLOCALS_HASH_TABLE_SIZE	73
-#define SLSTATIC_HASH_TABLE_SIZE	73
-
-/* Size of the keyboard buffer use by the ungetkey routines */
-#ifdef __MSDOS_16BIT__
-# define SL_MAX_INPUT_BUFFER_LEN	40
-#else
-# define SL_MAX_INPUT_BUFFER_LEN	1024
-#endif
-
-/* Maximum number of nested switch statements */
-#define SLANG_MAX_NESTED_SWITCH		10
-
-/* Size of the block stack (used in byte-compiling) */
-#define SLANG_MAX_BLOCK_STACK_LEN	50
-
-/* slfile.c: Max number of open file pointers */
-#ifdef __MSDOS_16BIT__
-# define SL_MAX_FILES			32
-#else
-# define SL_MAX_FILES			256
-#endif
diff --git a/mdk-stage1/slang/slmalloc.c b/mdk-stage1/slang/slmalloc.c
deleted file mode 100644
index be4ed6cae..000000000
--- a/mdk-stage1/slang/slmalloc.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#ifdef SL_MALLOC_DEBUG
-# undef SL_MALLOC_DEBUG
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef __alpha
-# define Chunk 8
-#else
-# define Chunk 4
-#endif
-
-static long Total_Allocated;
-static long Max_Single_Allocation;
-static long Max_Allocated;
-/* #define SLDEBUG_DOUT */
-
-#ifdef SLDEBUG_DOUT
-static FILE *dout;
-#endif
-
-void SLmalloc_dump_statistics (void)
-{
-#ifdef SLDEBUG_DOUT
-   fflush (dout);
-#endif
-   fprintf (stderr, "Total Allocated: %ld\nHighest single allocation: %ld\nHighest Total Allocated:%ld\n",
-	    Total_Allocated, Max_Single_Allocation, Max_Allocated);
-}
-
-static void register_at_exit_fun (void)
-{
-   static int is_registered = 0;
-   if (is_registered)
-     return;
-   is_registered = 1;
-
-#ifdef SLDEBUG_DOUT
-   if (dout == NULL) dout = fopen ("malloc.out", "w");
-#endif
-   SLang_add_cleanup_function (SLmalloc_dump_statistics);
-}
-
-static void fixup (unsigned char *p, unsigned long n, char *what)
-{
-   register_at_exit_fun ();
-
-   p += Chunk;
-   *(p - 4)= (unsigned char) ((n >> 24) & 0xFF);
-   *(p - 3) = (unsigned char) ((n >> 16) & 0xFF);
-   *(p - 2) = (unsigned char) ((n >> 8) & 0xFF);
-   *(p - 1) = (unsigned char) (n & 0xFF);
-   *(p + (int) n) = 27;
-   *(p + (int) (n + 1)) = 182;
-   *(p + (int) (n + 2)) = 81;
-   *(p + (int) (n + 3)) = 86;
-   Total_Allocated += (long) n;
-   if (Total_Allocated > Max_Allocated) Max_Allocated = Total_Allocated;
-   if ((long) n > Max_Single_Allocation)
-     Max_Single_Allocation = (long) n;
-
-#ifdef SLDEBUG_DOUT
-   fprintf (dout, "ALLOC: %s\t%p %ld\n", what, p, (long) n);
-#else
-   (void) what;
-#endif
-}
-
-static void SLmalloc_doerror (char *buf)
-{
-   SLang_doerror (buf);
-}
-
-static int check_memory (unsigned char *p, char *what)
-{
-   char buf[128];
-   unsigned long n;
-
-   register_at_exit_fun ();
-
-   n = ((unsigned long) *(p - 4)) << 24;
-   n |= ((unsigned long) *(p - 3)) << 16;
-   n |= ((unsigned long) *(p - 2)) << 8;
-   n |= (unsigned long) *(p - 1);
-
-   if (n == 0xFFFFFFFFUL)
-     {
-	sprintf (buf, "%s: %p: Already FREE! Abort NOW.", what, (void*)p - Chunk);
-	SLmalloc_doerror (buf);
-	return -1;
-     }
-
-   if ((*(p + (int) n) != 27)
-       || (*(p + (int) (n + 1)) != 182)
-       || (*(p + (int) (n + 2)) != 81)
-       || (*(p + (int) (n + 3)) != 86))
-     {
-	sprintf (buf, "\007%s: %p: Memory corrupt! Abort NOW.", what, (void*)p);
-	SLmalloc_doerror (buf);
-	return -1;
-     }
-
-   *(p - 4) = *(p - 3) = *(p - 2) = *(p - 1) = 0xFF;
-
-   Total_Allocated -= (long) n;
-   if (Total_Allocated < 0)
-     {
-	sprintf (buf, "\007%s: %p\nFreed %ld, Allocated is: %ld!\n",
-		 what, (void*)p, (long) n, Total_Allocated);
-	SLang_doerror (buf);
-     }
-#ifdef SLDEBUG_DOUT
-   fprintf (dout, "FREE: %s:\t%p %ld\n", what, p, (long) n);
-#endif
-   return 0;
-}
-
-void SLdebug_free (char *p)
-{
-   if (p == NULL) return;
-   if (-1 == check_memory ((unsigned char *) p, "FREE")) return;
-
-   SLFREE (p - Chunk);
-}
-
-char *SLdebug_malloc (unsigned long n)
-{
-   char *p;
-
-   if ((p = (char *) SLMALLOC (n + 2 * Chunk)) == NULL) return NULL;
-
-   fixup ((unsigned char *) p, n, "MALLOC");
-   return p + Chunk;
-}
-
-char *SLdebug_realloc (char *p, unsigned long n)
-{
-   if (-1 == check_memory ((unsigned char *) p, "REALLOC")) return NULL;
-   if ((p = (char *) SLREALLOC (p - Chunk, n + 2 * Chunk)) == NULL) return NULL;
-   fixup ((unsigned char *) p, n, "REALLOC");
-   return p + Chunk;
-}
-
-char *SLdebug_calloc (unsigned long n, unsigned long size)
-{
-   char *p;
-   int m;
-
-   /* This is tough -- hope this is a good assumption!! */
-   if (size >= Chunk) m = 1; else m = Chunk;
-
-   if ((p = (char *) SLCALLOC (n + m + m, size)) == NULL) return NULL;
-   fixup ((unsigned char *) p, size * n, "CALLOC");
-   return p + Chunk;
-}
-
diff --git a/mdk-stage1/slang/slmath.c b/mdk-stage1/slang/slmath.c
deleted file mode 100644
index 1d61e14d3..000000000
--- a/mdk-stage1/slang/slmath.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/* sin, cos, etc, for S-Lang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include <math.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef PI
-# undef PI
-#endif
-#define PI 3.14159265358979323846264338327950288
-
-#if defined(__unix__)
-#include <signal.h>
-#include <errno.h>
-
-#define SIGNAL  SLsignal
-
-static void math_floating_point_exception (int sig)
-{
-   sig = errno;
-   if (SLang_Error == 0) SLang_Error = SL_FLOATING_EXCEPTION;
-   (void) SIGNAL (SIGFPE, math_floating_point_exception);
-   errno = sig;
-}
-#endif
-
-double SLmath_hypot (double x, double y)
-{
-   double fr, fi, ratio;
-
-   fr = fabs(x);
-   fi = fabs(y);
-
-   if (fr > fi)
-     {
-	ratio = y / x;
-	x = fr * sqrt (1.0 + ratio * ratio);
-     }
-   else if (fi == 0.0) x = 0.0;
-   else
-     {
-	ratio = x / y;
-	x = fi * sqrt (1.0 + ratio * ratio);
-     }
-
-   return x;
-}
-
-/* usage here is a1 a2 ... an n x ==> a1x^n + a2 x ^(n - 1) + ... + an */
-static double math_poly (void)
-{
-   int n;
-   double xn = 1.0, sum = 0.0;
-   double an, x;
-
-   if ((SLang_pop_double(&x, NULL, NULL))
-       || (SLang_pop_integer(&n))) return(0.0);
-
-   while (n-- > 0)
-     {
-	if (SLang_pop_double(&an, NULL, NULL)) break;
-	sum += an * xn;
-	xn = xn * x;
-     }
-   return (double) sum;
-}
-
-static int double_math_op_result (int op, unsigned char a, unsigned char *b)
-{
-   (void) op;
-
-   if (a != SLANG_FLOAT_TYPE)
-     *b = SLANG_DOUBLE_TYPE;
-   else
-     *b = a;
-
-   return 1;
-}
-
-#ifdef HAVE_ASINH
-# define ASINH_FUN	asinh
-#else
-# define ASINH_FUN	my_asinh
-static double my_asinh (double x)
-{
-   return log (x + sqrt (x*x + 1));
-}
-#endif
-#ifdef HAVE_ACOSH
-# define ACOSH_FUN	acosh
-#else
-# define ACOSH_FUN	my_acosh
-static double my_acosh (double x)
-{
-   return log (x + sqrt(x*x - 1));     /* x >= 1 */
-}
-#endif
-#ifdef HAVE_ATANH
-# define ATANH_FUN	atanh
-#else
-# define ATANH_FUN	my_atanh
-static double my_atanh (double x)
-{
-   return 0.5 * log ((1.0 + x)/(1.0 - x)); /* 0 <= x^2 < 1 */
-}
-#endif
-
-static int double_math_op (int op,
-			   unsigned char type, VOID_STAR ap, unsigned int na,
-			   VOID_STAR bp)
-{
-   double *a, *b;
-   unsigned int i;
-   double (*fun) (double);
-
-   (void) type;
-   a = (double *) ap;
-   b = (double *) bp;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLMATH_SINH:
-	fun = sinh;
-	break;
-      case SLMATH_COSH:
-	fun = cosh;
-	break;
-      case SLMATH_TANH:
-	fun = tanh;
-	break;
-      case SLMATH_TAN:
-	fun = tan;
-	break;
-      case SLMATH_ASIN:
-	fun = asin;
-	break;
-      case SLMATH_ACOS:
-	fun = acos;
-	break;
-      case SLMATH_ATAN:
-	fun = atan;
-	break;
-      case SLMATH_EXP:
-	fun = exp;
-	break;
-      case SLMATH_LOG:
-	fun = log;
-	break;
-      case SLMATH_LOG10:
-	fun = log10;
-	break;
-      case SLMATH_SQRT:
-	fun = sqrt;
-	break;
-      case SLMATH_SIN:
-	fun = sin;
-	break;
-      case SLMATH_COS:
-	fun = cos;
-	break;
-
-      case SLMATH_ASINH:
-	fun = ASINH_FUN;
-	break;
-      case SLMATH_ATANH:
-	fun = ATANH_FUN;
-	break;
-      case SLMATH_ACOSH:
-	fun = ACOSH_FUN;
-	break;
-
-      case SLMATH_CONJ:
-      case SLMATH_REAL:
-	for (i = 0; i < na; i++)
-	  b[i] = a[i];
-	return 1;
-      case SLMATH_IMAG:
-	for (i = 0; i < na; i++)
-	  b[i] = 0.0;
-	return 1;
-     }
-
-   for (i = 0; i < na; i++)
-     b[i] = (*fun) (a[i]);
-
-   return 1;
-}
-
-static int float_math_op (int op,
-			  unsigned char type, VOID_STAR ap, unsigned int na,
-			  VOID_STAR bp)
-{
-   float *a, *b;
-   unsigned int i;
-   double (*fun) (double);
-
-   (void) type;
-   a = (float *) ap;
-   b = (float *) bp;
-
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLMATH_SINH:
-	fun = sinh;
-	break;
-      case SLMATH_COSH:
-	fun = cosh;
-	break;
-      case SLMATH_TANH:
-	fun = tanh;
-	break;
-      case SLMATH_TAN:
-	fun = tan;
-	break;
-      case SLMATH_ASIN:
-	fun = asin;
-	break;
-      case SLMATH_ACOS:
-	fun = acos;
-	break;
-      case SLMATH_ATAN:
-	fun = atan;
-	break;
-      case SLMATH_EXP:
-	fun = exp;
-	break;
-      case SLMATH_LOG:
-	fun = log;
-	break;
-      case SLMATH_LOG10:
-	fun = log10;
-	break;
-      case SLMATH_SQRT:
-	fun = sqrt;
-	break;
-      case SLMATH_SIN:
-	fun = sin;
-	break;
-      case SLMATH_COS:
-	fun = cos;
-	break;
-
-      case SLMATH_ASINH:
-	fun = ASINH_FUN;
-	break;
-      case SLMATH_ATANH:
-	fun = ATANH_FUN;
-	break;
-      case SLMATH_ACOSH:
-	fun = ACOSH_FUN;
-	break;
-
-      case SLMATH_CONJ:
-      case SLMATH_REAL:
-	for (i = 0; i < na; i++)
-	  b[i] = a[i];
-	return 1;
-      case SLMATH_IMAG:
-	for (i = 0; i < na; i++)
-	  b[i] = 0.0;
-	return 1;
-     }
-
-   for (i = 0; i < na; i++)
-     b[i] = (float) (*fun) ((double) a[i]);
-
-   return 1;
-}
-
-static int generic_math_op (int op,
-			    unsigned char type, VOID_STAR ap, unsigned int na,
-			    VOID_STAR bp)
-{
-   double *b;
-   unsigned int i;
-   SLang_To_Double_Fun_Type to_double;
-   double (*fun) (double);
-   unsigned int da;
-   char *a;
-
-   if (NULL == (to_double = SLarith_get_to_double_fun (type, &da)))
-     return 0;
-
-   b = (double *) bp;
-   a = (char *) ap;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLMATH_SINH:
-	fun = sinh;
-	break;
-      case SLMATH_COSH:
-	fun = cosh;
-	break;
-      case SLMATH_TANH:
-	fun = tanh;
-	break;
-      case SLMATH_TAN:
-	fun = tan;
-	break;
-      case SLMATH_ASIN:
-	fun = asin;
-	break;
-      case SLMATH_ACOS:
-	fun = acos;
-	break;
-      case SLMATH_ATAN:
-	fun = atan;
-	break;
-      case SLMATH_EXP:
-	fun = exp;
-	break;
-      case SLMATH_LOG:
-	fun = log;
-	break;
-      case SLMATH_LOG10:
-	fun = log10;
-	break;
-      case SLMATH_SQRT:
-	fun = sqrt;
-	break;
-      case SLMATH_SIN:
-	fun = sin;
-	break;
-      case SLMATH_COS:
-	fun = cos;
-	break;
-
-      case SLMATH_ASINH:
-	fun = ASINH_FUN;
-	break;
-      case SLMATH_ATANH:
-	fun = ATANH_FUN;
-	break;
-      case SLMATH_ACOSH:
-	fun = ACOSH_FUN;
-	break;
-
-
-      case SLMATH_CONJ:
-      case SLMATH_REAL:
-	for (i = 0; i < na; i++)
-	  {
-	     b[i] = to_double((VOID_STAR) a);
-	     a += da;
-	  }
-	return 1;
-
-      case SLMATH_IMAG:
-	for (i = 0; i < na; i++)
-	  b[i] = 0.0;
-	return 1;
-     }
-
-   for (i = 0; i < na; i++)
-     {
-	b[i] = (*fun) (to_double ((VOID_STAR) a));
-	a += da;
-     }
-   
-   return 1;
-}
-
-#if SLANG_HAS_COMPLEX
-static int complex_math_op_result (int op, unsigned char a, unsigned char *b)
-{
-   (void) a;
-   switch (op)
-     {
-      default:
-	*b = SLANG_COMPLEX_TYPE;
-	break;
-
-      case SLMATH_REAL:
-      case SLMATH_IMAG:
-	*b = SLANG_DOUBLE_TYPE;
-	break;
-     }
-   return 1;
-}
-
-static int complex_math_op (int op,
-			    unsigned char type, VOID_STAR ap, unsigned int na,
-			    VOID_STAR bp)
-{
-   double *a, *b;
-   unsigned int i;
-   unsigned int na2 = na * 2;
-   double *(*fun) (double *, double *);
-
-   (void) type;
-   a = (double *) ap;
-   b = (double *) bp;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLMATH_REAL:
-	for (i = 0; i < na; i++)
-	  b[i] = a[2 * i];
-	return 1;
-
-      case SLMATH_IMAG:
-	for (i = 0; i < na; i++)
-	  b[i] = a[2 * i + 1];
-	return 1;
-
-      case SLMATH_CONJ:
-	for (i = 0; i < na2; i += 2)
-	  {
-	     b[i] = a[i];
-	     b[i+1] = -a[i+1];
-	  }
-	return 1;
-
-      case SLMATH_ATANH:
-	fun = SLcomplex_atanh;
-	break;
-      case SLMATH_ACOSH:
-	fun = SLcomplex_acosh;
-	break;
-      case SLMATH_ASINH:
-	fun = SLcomplex_asinh;
-	break;
-      case SLMATH_EXP:
-	fun = SLcomplex_exp;
-	break;
-      case SLMATH_LOG:
-	fun = SLcomplex_log;
-	break;
-      case SLMATH_LOG10:
-	fun = SLcomplex_log10;
-	break;
-      case SLMATH_SQRT:
-	fun = SLcomplex_sqrt;
-	break;
-      case SLMATH_SIN:
-	fun = SLcomplex_sin;
-	break;
-      case SLMATH_COS:
-	fun = SLcomplex_cos;
-	break;
-      case SLMATH_SINH:
-	fun = SLcomplex_sinh;
-	break;
-      case SLMATH_COSH:
-	fun = SLcomplex_cosh;
-	break;
-      case SLMATH_TANH:
-	fun = SLcomplex_tanh;
-	break;
-      case SLMATH_TAN:
-	fun = SLcomplex_tan;
-	break;
-      case SLMATH_ASIN:
-	fun = SLcomplex_asin;
-	break;
-      case SLMATH_ACOS:
-	fun = SLcomplex_acos;
-	break;
-      case SLMATH_ATAN:
-	fun = SLcomplex_atan;
-	break;
-     }
-
-   for (i = 0; i < na2; i += 2)
-     (void) (*fun) (b + i, a + i);
-
-   return 1;
-}
-#endif
-
-static SLang_DConstant_Type DConst_Table [] =
-{
-   MAKE_DCONSTANT("E", 2.718281828459045),
-   MAKE_DCONSTANT("PI", 3.14159265358979323846264338327950288),
-   SLANG_END_DCONST_TABLE
-};
-
-static SLang_Math_Unary_Type SLmath_Table [] =
-{
-   MAKE_MATH_UNARY("sinh", SLMATH_SINH),
-   MAKE_MATH_UNARY("asinh", SLMATH_ASINH),
-   MAKE_MATH_UNARY("cosh", SLMATH_COSH),
-   MAKE_MATH_UNARY("acosh", SLMATH_ACOSH),
-   MAKE_MATH_UNARY("tanh", SLMATH_TANH),
-   MAKE_MATH_UNARY("atanh", SLMATH_ATANH),
-   MAKE_MATH_UNARY("sin", SLMATH_SIN),
-   MAKE_MATH_UNARY("cos", SLMATH_COS),
-   MAKE_MATH_UNARY("tan", SLMATH_TAN),
-   MAKE_MATH_UNARY("atan", SLMATH_ATAN),
-   MAKE_MATH_UNARY("acos", SLMATH_ACOS),
-   MAKE_MATH_UNARY("asin", SLMATH_ASIN),
-   MAKE_MATH_UNARY("exp", SLMATH_EXP),
-   MAKE_MATH_UNARY("log", SLMATH_LOG),
-   MAKE_MATH_UNARY("sqrt", SLMATH_SQRT),
-   MAKE_MATH_UNARY("log10", SLMATH_LOG10),
-#if SLANG_HAS_COMPLEX
-   MAKE_MATH_UNARY("Real", SLMATH_REAL),
-   MAKE_MATH_UNARY("Imag", SLMATH_IMAG),
-   MAKE_MATH_UNARY("Conj", SLMATH_CONJ),
-#endif
-   SLANG_END_MATH_UNARY_TABLE
-};
-
-static SLang_Intrin_Fun_Type SLang_Math_Table [] =
-{
-   MAKE_INTRINSIC_0("polynom", math_poly, SLANG_DOUBLE_TYPE),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-int SLang_init_slmath (void)
-{
-   unsigned char *int_types;
-
-#if defined(__unix__)
-   (void) SIGNAL (SIGFPE, math_floating_point_exception);
-#endif
-
-   int_types = _SLarith_Arith_Types;
-
-   while (*int_types != SLANG_FLOAT_TYPE)
-     {
-	if (-1 == SLclass_add_math_op (*int_types, generic_math_op, double_math_op_result))
-	  return -1;
-	int_types++;
-     }
-
-   if ((-1 == SLclass_add_math_op (SLANG_FLOAT_TYPE, float_math_op, double_math_op_result))
-       || (-1 == SLclass_add_math_op (SLANG_DOUBLE_TYPE, double_math_op, double_math_op_result))
-#if SLANG_HAS_COMPLEX
-       || (-1 == SLclass_add_math_op (SLANG_COMPLEX_TYPE, complex_math_op, complex_math_op_result))
-#endif
-       )
-     return -1;
-
-   if ((-1 == SLadd_math_unary_table (SLmath_Table, "__SLMATH__"))
-       || (-1 == SLadd_intrin_fun_table (SLang_Math_Table, NULL))
-       || (-1 == SLadd_dconstant_table (DConst_Table, NULL)))
-     return -1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slmemchr.c b/mdk-stage1/slang/slmemchr.c
deleted file mode 100644
index 1417bc549..000000000
--- a/mdk-stage1/slang/slmemchr.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* These routines are fast memcpy, memset routines.  When available, I
-   use system rouines.  For msdos, I use inline assembly. */
-
-/* The current versions only work in the forward direction only!! */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-char *SLmemchr(register char *p, register char c, register int n)
-{
-   int n2;
-   register char *pmax;
-
-   pmax = p + (n - 32);
-
-   while (p <= pmax)
-     {
-	if ((*p == c) || (*++p == c) || (*++p == c) || (*++p == c)
-	    || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
-	    || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
-	    || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
-	    || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
-	    || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
-	    || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
-	    || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c))
-	  return p;
-	p++;
-     }
-
-   n2 = n % 32;
-
-   while (n2--)
-     {
-	if (*p == c) return p;
-	p++;
-     }
-   return(NULL);
-}
diff --git a/mdk-stage1/slang/slmemcmp.c b/mdk-stage1/slang/slmemcmp.c
deleted file mode 100644
index c5ed50095..000000000
--- a/mdk-stage1/slang/slmemcmp.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* These routines are fast memcpy, memset routines.  When available, I
-   use system rouines.  For msdos, I use inline assembly. */
-
-/* The current versions only work in the forward direction only!! */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/* This is an UNSIGNED comparison designed for systems that either do not have
-* this function or performed a signed comparison (SunOS)
-*/
-int SLmemcmp(register char *s1, register char *s2, int n)
-{
-   register int cmp;
-   register char *s1max;
-
-   s1max = s1 + (n - 32);
-
-   while (s1 <= s1max)
-     {
-	if (*s1 != *s2) return ((unsigned char) *s1 - (unsigned char) *s2);
-	if (*(s1 + 1) != *(s2 + 1)) return ((unsigned char) *(s1 + 1) - (unsigned char) *(s2 + 1));
-	if (*(s1 + 2) != *(s2 + 2)) return ((unsigned char) *(s1 + 2) - (unsigned char) *(s2 + 2));
-	if (*(s1 + 3) != *(s2 + 3)) return ((unsigned char) *(s1 + 3) - (unsigned char) *(s2 + 3));
-	if (*(s1 + 4) != *(s2 + 4)) return ((unsigned char) *(s1 + 4) - (unsigned char) *(s2 + 4));
-	if (*(s1 + 5) != *(s2 + 5)) return ((unsigned char) *(s1 + 5) - (unsigned char) *(s2 + 5));
-	if (*(s1 + 6) != *(s2 + 6)) return ((unsigned char) *(s1 + 6) - (unsigned char) *(s2 + 6));
-	if (*(s1 + 7) != *(s2 + 7)) return ((unsigned char) *(s1 + 7) - (unsigned char) *(s2 + 7));
-	if (*(s1 + 8) != *(s2 + 8)) return ((unsigned char) *(s1 + 8) - (unsigned char) *(s2 + 8));
-	if (*(s1 + 9) != *(s2 + 9)) return ((unsigned char) *(s1 + 9) - (unsigned char) *(s2 + 9));
-	if (*(s1 + 10) != *(s2 + 10)) return ((unsigned char) *(s1 + 10) - (unsigned char) *(s2 + 10));
-	if (*(s1 + 11) != *(s2 + 11)) return ((unsigned char) *(s1 + 11) - (unsigned char) *(s2 + 11));
-	if (*(s1 + 12) != *(s2 + 12)) return ((unsigned char) *(s1 + 12) - (unsigned char) *(s2 + 12));
-	if (*(s1 + 13) != *(s2 + 13)) return ((unsigned char) *(s1 + 13) - (unsigned char) *(s2 + 13));
-	if (*(s1 + 14) != *(s2 + 14)) return ((unsigned char) *(s1 + 14) - (unsigned char) *(s2 + 14));
-	if (*(s1 + 15) != *(s2 + 15)) return ((unsigned char) *(s1 + 15) - (unsigned char) *(s2 + 15));
-	if (*(s1 + 16) != *(s2 + 16)) return ((unsigned char) *(s1 + 16) - (unsigned char) *(s2 + 16));
-	if (*(s1 + 17) != *(s2 + 17)) return ((unsigned char) *(s1 + 17) - (unsigned char) *(s2 + 17));
-	if (*(s1 + 18) != *(s2 + 18)) return ((unsigned char) *(s1 + 18) - (unsigned char) *(s2 + 18));
-	if (*(s1 + 19) != *(s2 + 19)) return ((unsigned char) *(s1 + 19) - (unsigned char) *(s2 + 19));
-	if (*(s1 + 20) != *(s2 + 20)) return ((unsigned char) *(s1 + 20) - (unsigned char) *(s2 + 20));
-	if (*(s1 + 21) != *(s2 + 21)) return ((unsigned char) *(s1 + 21) - (unsigned char) *(s2 + 21));
-	if (*(s1 + 22) != *(s2 + 22)) return ((unsigned char) *(s1 + 22) - (unsigned char) *(s2 + 22));
-	if (*(s1 + 23) != *(s2 + 23)) return ((unsigned char) *(s1 + 23) - (unsigned char) *(s2 + 23));
-	if (*(s1 + 24) != *(s2 + 24)) return ((unsigned char) *(s1 + 24) - (unsigned char) *(s2 + 24));
-	if (*(s1 + 25) != *(s2 + 25)) return ((unsigned char) *(s1 + 25) - (unsigned char) *(s2 + 25));
-	if (*(s1 + 26) != *(s2 + 26)) return ((unsigned char) *(s1 + 26) - (unsigned char) *(s2 + 26));
-	if (*(s1 + 27) != *(s2 + 27)) return ((unsigned char) *(s1 + 27) - (unsigned char) *(s2 + 27));
-	if (*(s1 + 28) != *(s2 + 28)) return ((unsigned char) *(s1 + 28) - (unsigned char) *(s2 + 28));
-	if (*(s1 + 29) != *(s2 + 29)) return ((unsigned char) *(s1 + 29) - (unsigned char) *(s2 + 29));
-	if (*(s1 + 30) != *(s2 + 30)) return ((unsigned char) *(s1 + 30) - (unsigned char) *(s2 + 30));
-	if (*(s1 + 31) != *(s2 + 31)) return ((unsigned char) *(s1 + 31) - (unsigned char) *(s2 + 31));
-	s1 += 32; s2 += 32;
-     }
-
-   s1max = s1 + (n % 32);
-
-   while (s1 < s1max)
-     {
-	cmp = (unsigned char) *s1 - (unsigned char) *s2;
-	if (cmp) return(cmp);
-	s1++;
-	s2++;
-     }
-
-   return(0);
-}
diff --git a/mdk-stage1/slang/slmemcpy.c b/mdk-stage1/slang/slmemcpy.c
deleted file mode 100644
index e8665e4c6..000000000
--- a/mdk-stage1/slang/slmemcpy.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* These routines are fast memcpy, memset routines.  When available, I
-   use system rouines.  For msdos, I use inline assembly. */
-
-/* The current versions only work in the forward direction only!! */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-char *SLmemcpy(char *s1, char *s2, int n)
-{
-#if defined(__BORLANDC__) && defined(__MSDOS__)
-   asm mov ax, ds
-   asm mov bx, si
-   asm mov dx, di
-   asm mov cx, n
-   asm les di, s1
-   asm lds si, s2
-   asm cld
-   asm rep movsb
-   asm mov ds, ax
-   asm mov si, bx
-   asm mov di, dx
-   return(s1);
-
-#else
-   register char *smax, *s = s1;
-   int n2;
-
-   n2 = n % 4;
-   smax = s + (n - 4);
-   while (s <= smax)
-     {
-	*s = *s2; *(s + 1) = *(s2 + 1); *(s + 2) = *(s2 + 2); *(s + 3) = *(s2 + 3);
-	s += 4;
-	s2 += 4;
-     }
-   while (n2--) *s++ = *s2++;
-   return(s1);
-#endif
-}
diff --git a/mdk-stage1/slang/slmemset.c b/mdk-stage1/slang/slmemset.c
deleted file mode 100644
index 3851663c5..000000000
--- a/mdk-stage1/slang/slmemset.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* These routines are fast memcpy, memset routines.  When available, I
-   use system rouines.  For msdos, I use inline assembly. */
-
-/* The current versions only work in the forward direction only!! */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-void SLmemset(char *p, char space, int n)
-{
-#if defined(__BORLANDC__) && defined(__MSDOS__)
-   asm mov al, space
-   asm mov dx, di
-   asm mov cx, n
-   asm les di, p
-   asm cld
-   asm rep stosb
-   asm mov di, dx
-#else
-   register char *pmax;
-
-   pmax = p + (n - 4);
-   n = n % 4;
-   while (p <= pmax)
-     {
-	*p++ = space; *p++ = space; *p++ = space; *p++= space;
-     }
-   while (n--) *p++ = space;
-#endif
-}
diff --git a/mdk-stage1/slang/slmisc.c b/mdk-stage1/slang/slmisc.c
deleted file mode 100644
index ccc7a9bdf..000000000
--- a/mdk-stage1/slang/slmisc.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#define DEBUG_MALLOC 0
-
-#if DEBUG_MALLOC
-# define SLREALLOC_FUN	SLdebug_realloc
-# define SLMALLOC_FUN	SLdebug_malloc
-# define SLFREE_FUN	SLdebug_free
-#else
-# define SLREALLOC_FUN	SLREALLOC
-# define SLMALLOC_FUN	SLMALLOC
-# define SLFREE_FUN	SLFREE
-#endif
-
-/* Version information goes here since this file is always needed. */
-int SLang_Version = SLANG_VERSION;
-char *SLang_Version_String = SLANG_VERSION_STRING;
-
-char *SLmake_string(char *str)
-{
-   return SLmake_nstring(str, strlen (str));
-}
-
-char *SLmake_nstring (char *str, unsigned int n)
-{
-   char *ptr;
-
-   if (NULL == (ptr = SLmalloc(n + 1)))
-     {
-	return NULL;
-     }
-   SLMEMCPY (ptr, str, n);
-   ptr[n] = 0;
-   return(ptr);
-}
-
-void SLmake_lut (unsigned char *lut, unsigned char *range, unsigned char reverse)
-{
-   register unsigned char *l = lut, *lmax = lut + 256;
-   int i, r1, r2;
-
-   while (l < lmax) *l++ = reverse;
-   reverse = !reverse;
-
-   r1 = *range++;
-   while (r1)
-     {
-	r2 = *range++;
-	if ((r2 == '-') && (*range != 0))
-	  {
-	     r2 = *range++;
-	     for (i = r1; i <= r2; i++) lut[i] = reverse;
-	     r1 = *range++;
-	     continue;
-	  }
-	lut[r1] = reverse;
-	r1 = r2;
-     }
-}
-
-char *SLmalloc (unsigned int len)
-{
-   char *p;
-
-   p = (char *) SLMALLOC_FUN (len);
-   if (p == NULL)
-     SLang_Error = SL_MALLOC_ERROR;
-
-   return p;
-}
-
-void SLfree (char *p)
-{
-   if (p != NULL) SLFREE_FUN (p);
-}
-
-char *SLrealloc (char *p, unsigned int len)
-{
-   if (len == 0)
-     {
-	SLfree (p);
-	return NULL;
-     }
-
-   if (p == NULL) p = SLmalloc (len);
-   else
-     {
-	p = (char *)SLREALLOC_FUN (p, len);
-	if (p == NULL)
-	  SLang_Error = SL_MALLOC_ERROR;
-     }
-   return p;
-}
-
-char *SLcalloc (unsigned int nelems, unsigned int len)
-{
-   char *p;
-
-   len = nelems * len;
-   p = SLmalloc (len);
-   if (p != NULL) SLMEMSET (p, 0, len);
-   return p;
-}
-
-/* p and ch may point to the same buffer */
-char *_SLexpand_escaped_char(char *p, char *ch)
-{
-   int i = 0;
-   int max = 0, num, base = 0;
-   char ch1;
-
-   ch1 = *p++;
-
-   switch (ch1)
-     {
-      default: num = ch1; break;
-      case 'n': num = '\n'; break;
-      case 't': num = '\t'; break;
-      case 'v': num = '\v'; break;
-      case 'b': num = '\b'; break;
-      case 'r': num = '\r'; break;
-      case 'f': num = '\f'; break;
-      case 'E': case 'e': num = 27; break;
-      case 'a': num = 7;
-	break;
-
-	/* octal */
-      case '0': case '1': case '2': case '3':
-      case '4': case '5': case '6': case '7':
-	max = '7';
-	base = 8; i = 2; num = ch1 - '0';
-	break;
-
-      case 'd':			       /* decimal -- S-Lang extension */
-	base = 10;
-	i = 3;
-	max = '9';
-	num = 0;
-	break;
-
-      case 'x':			       /* hex */
-	base = 16;
-	max = '9';
-	i = 2;
-	num = 0;
-	break;
-     }
-
-   while (i--)
-     {
-	ch1 = *p;
-
-	if ((ch1 <= max) && (ch1 >= '0'))
-	  {
-	     num = base * num + (ch1 - '0');
-	  }
-	else if (base == 16)
-	  {
-	     ch1 |= 0x20;
-	     if ((ch1 < 'a') || ((ch1 > 'f'))) break;
-	     num = base * num + 10 + (ch1 - 'a');
-	  }
-	else break;
-	p++;
-     }
-
-   *ch = (char) num;
-   return p;
-}
-
-/* s and t could represent the same space */
-void SLexpand_escaped_string (register char *s, register char *t,
-			      register char *tmax)
-{
-   char ch;
-
-   while (t < tmax)
-     {
-	ch = *t++;
-	if (ch == '\\')
-	  {
-	     t = _SLexpand_escaped_char (t, &ch);
-	  }
-	*s++ = ch;
-     }
-   *s = 0;
-}
-
-int SLextract_list_element (char *list, unsigned int nth, char delim,
-			    char *elem, unsigned int buflen)
-{
-   char *el, *elmax;
-   char ch;
-
-   while (nth > 0)
-     {
-	while ((0 != (ch = *list)) && (ch != delim))
-	  list++;
-
-	if (ch == 0) return -1;
-
-	list++;
-	nth--;
-     }
-
-   el = elem;
-   elmax = el + (buflen - 1);
-
-   while ((0 != (ch = *list)) && (ch != delim) && (el < elmax))
-     *el++ = *list++;
-   *el = 0;
-
-   return 0;
-}
-
-#ifndef HAVE_VSNPRINTF
-int _SLvsnprintf (char *buf, unsigned int buflen, char *fmt, va_list ap)
-{
-#if 1
-   unsigned int len;
-
-   /* On some systems vsprintf returns useless information.  So, punt */
-   vsprintf (buf, fmt, ap);
-   len = strlen (buf);
-   if (len >= buflen)
-     {
-	SLang_exit_error ("\
-Your system lacks the vsnprintf system call and vsprintf overflowed a buffer.\n\
-The integrity of this program has been violated.\n");
-	return EOF;		       /* NOT reached */
-     }
-   return (int)len;
-#else
-   int status;
-
-   status = vsprintf (buf, fmt, ap);
-   if (status >= (int) buflen)
-     {
-	/* If we are lucky, we will get this far.  The real solution is to
-	 * provide a working version of vsnprintf
-	 */
-	SLang_exit_error ("\
-Your system lacks the vsnprintf system call and vsprintf overflowed a buffer.\n\
-The integrity of this program has been violated.\n");
-	return EOF;		       /* NOT reached */
-     }
-   return status;
-#endif
-}
-#endif
-
-#ifndef HAVE_SNPRINTF
-int _SLsnprintf (char *buf, unsigned int buflen, char *fmt, ...)
-{
-   int status;
-
-   va_list ap;
-
-   va_start (ap, fmt);
-   status = _SLvsnprintf (buf, buflen, fmt, ap);
-   va_end (ap);
-
-   return status;
-}
-#endif
-
-typedef struct _Cleanup_Function_Type
-{
-   struct _Cleanup_Function_Type *next;
-   void (*f)(void);
-}
-Cleanup_Function_Type;
-
-static Cleanup_Function_Type *Cleanup_Function_List;
-
-static void cleanup_slang (void)
-{
-   while (Cleanup_Function_List != NULL)
-     {
-	Cleanup_Function_Type *next = Cleanup_Function_List->next;
-	(*Cleanup_Function_List->f)();
-	SLFREE_FUN ((char *) Cleanup_Function_List);
-	Cleanup_Function_List = next;
-     }
-}
-
-#ifndef HAVE_ATEXIT
-# ifdef HAVE_ON_EXIT
-static void on_exit_cleanup_slang (int arg_unused)
-{
-   (void) arg_unused;
-   cleanup_slang ();
-}
-# endif
-#endif
-
-int SLang_add_cleanup_function (void (*f)(void))
-{
-   Cleanup_Function_Type *l;
-
-   l = (Cleanup_Function_Type *) SLMALLOC_FUN (sizeof (Cleanup_Function_Type));
-   if (l == NULL)
-     return -1;
-
-   l->f = f;
-   l->next = Cleanup_Function_List;
-
-   if (Cleanup_Function_List == NULL)
-     {
-#ifdef HAVE_ATEXIT
-	(void) atexit (cleanup_slang);
-#else
-# ifdef HAVE_ON_EXIT
-	(void) on_exit (on_exit_cleanup_slang, 0);
-# endif
-#endif
-     }
-   Cleanup_Function_List = l;
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slnspace.c b/mdk-stage1/slang/slnspace.c
deleted file mode 100644
index 174ba7c81..000000000
--- a/mdk-stage1/slang/slnspace.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/* -*- mode: C; mode: fold; -*- */
-/* slnspace.c  --- Name Space implementation */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static SLang_NameSpace_Type *Namespace_Tables;
-
-static SLang_NameSpace_Type *find_name_table (char *name)
-{
-   SLang_NameSpace_Type *table_list;
-
-   table_list = Namespace_Tables;
-   while (table_list != NULL)
-     {
-	if (0 == strcmp (table_list->name, name))
-	  break;
-	table_list = table_list->next;
-     }
-   return table_list;
-}
-
-SLang_NameSpace_Type *_SLns_find_namespace (char *name)
-{
-   SLang_NameSpace_Type *table_list;
-
-   table_list = Namespace_Tables;
-   while (table_list != NULL)
-     {
-	if ((table_list->namespace_name != NULL)
-	    && (0 == strcmp (table_list->namespace_name, name)))
-	  break;
-	table_list = table_list->next;
-     }
-   return table_list;
-}
-
-SLang_NameSpace_Type *_SLns_allocate_namespace (char *name, unsigned int size)
-{
-   SLang_NameSpace_Type *table_list;
-   SLang_Name_Type **nt;
-   
-   if (NULL != (table_list = find_name_table (name)))
-     return table_list;
-
-   if (NULL == (name = SLang_create_slstring (name)))
-     return NULL;
-
-   if (NULL == (table_list = (SLang_NameSpace_Type *)
-		SLmalloc (sizeof (SLang_NameSpace_Type))))
-     {
-	SLang_free_slstring (name);
-	return NULL;
-     }
-   
-   if (NULL == (nt = (SLang_Name_Type **) SLmalloc (sizeof (SLang_Name_Type *) * size)))
-     {
-	SLang_free_slstring (name);
-	SLfree ((char *)table_list);
-	return NULL;
-     }
-
-   memset ((char *)nt, 0, size * sizeof (SLang_Name_Type *));
-   memset ((char *) table_list, 0, sizeof (SLang_NameSpace_Type));
-
-   table_list->name = name;
-   table_list->table = nt;
-   table_list->table_size = size;
-
-   table_list->next = Namespace_Tables;
-   Namespace_Tables = table_list;
-
-   return table_list;
-}
-
-int _SLns_set_namespace_name (SLang_NameSpace_Type *t, char *name)
-{
-   SLang_NameSpace_Type *t1;
-   
-   t1 = _SLns_find_namespace (name);
-   if (t1 == NULL)
-     t1 = t;
-   
-   if ((t != t1) || (*name == 0))
-     {
-	SLang_verror (SL_INTRINSIC_ERROR, "Namespace \"%s\" already exists",
-		      name);
-	return -1;
-     }
-
-   if (NULL == (name = SLang_create_slstring (name)))
-     return -1;
-
-   SLang_free_slstring (t->namespace_name);   /* NULL ok */
-   t->namespace_name = name;
-   
-   return 0;
-}
-
-SLang_Array_Type *_SLnspace_apropos (SLang_NameSpace_Type *ns, char *pat, unsigned int what)
-{
-   SLang_Array_Type *at;
-   unsigned int table_size;
-   SLang_Name_Type *t, **table;
-   int num_matches;
-   unsigned int i;
-   SLRegexp_Type rexp;
-   unsigned char rbuf[512];
-   unsigned int two;
-   
-   at = NULL;
-
-   if ((ns == NULL)
-       || ((table = ns->table) == NULL))
-     return NULL;
-
-   memset ((char *) &rexp, 0, sizeof (SLRegexp_Type));
-   rexp.case_sensitive = 1;
-   rexp.buf = rbuf;
-   rexp.buf_len = sizeof (rbuf);
-   rexp.pat = (unsigned char *)pat;
-
-   if (0 != SLang_regexp_compile (&rexp))
-     {
-	SLang_verror (SL_INVALID_PARM, "Invalid regular expression: %s", pat);
-	return NULL;
-     }
-   
-   table_size = ns->table_size;
-
-   two = 2;
-   while (two != 0)
-     {
-	two--;
-	
-	num_matches = 0;
-	for (i = 0; i < table_size; i++)
-	  {
-	     t = table[i];
-	     while (t != NULL)
-	       {
-		  unsigned int flags;
-		  char *name = t->name;
-
-		  switch (t->name_type)
-		    {
-		     case SLANG_GVARIABLE:
-		       flags = 8;
-		       break;
-		       
-		     case SLANG_ICONSTANT:
-		     case SLANG_DCONSTANT:
-		     case SLANG_RVARIABLE:
-		     case SLANG_IVARIABLE:
-		       flags = 4;
-		       break;
-
-		     case SLANG_INTRINSIC:
-		     case SLANG_MATH_UNARY:
-		     case SLANG_APP_UNARY:
-		       flags = 1;
-		       break;
-		       
-		     case SLANG_FUNCTION:
-		       flags = 2;
-		       break;
-		       
-		     default:
-		       flags = 0;
-		       break;
-		    }
-		  
-		  if ((flags & what)
-		      && (NULL != SLang_regexp_match ((unsigned char *)name, strlen (name), &rexp)))
-		    {
-		       if (at != NULL)
-			 {
-			    if (-1 == SLang_set_array_element (at, &num_matches, (VOID_STAR)&name))
-			      goto return_error;
-			 }
-		       num_matches++;
-		    }
-		  t = t->next;
-	       }
-	  }
-	
-	if (at == NULL)
-	  {
-	     at = SLang_create_array (SLANG_STRING_TYPE, 0, NULL, &num_matches, 1);
-	     if (at == NULL)
-	       goto return_error;
-	  }
-     }
-   
-   return at;
-   
-   return_error:
-   SLang_free_array (at);
-   return NULL;
-}
-
-SLang_NameSpace_Type *SLns_create_namespace (char *namespace_name)
-{   
-   SLang_NameSpace_Type *ns;
-   static int num;
-   char name[64];
-
-   if (namespace_name == NULL)
-     namespace_name = "Global";
-
-   ns = _SLns_find_namespace (namespace_name);
-   if (ns != NULL)
-     return ns;
-   
-   sprintf (name, " *** internal ns <%d> *** ", num);
-
-   if (NULL == (ns = _SLns_allocate_namespace (name, SLSTATIC_HASH_TABLE_SIZE)))
-     return NULL;
-   
-   num++;
-   if (-1 == _SLns_set_namespace_name (ns, namespace_name))
-     {
-	SLns_delete_namespace (ns);
-	return NULL;
-     }
-   
-   return ns;
-}
-
-void SLns_delete_namespace (SLang_NameSpace_Type *ns)
-{
-   (void) ns;
-   /* V2.0 */
-}
diff --git a/mdk-stage1/slang/slospath.c b/mdk-stage1/slang/slospath.c
deleted file mode 100644
index 644931e81..000000000
--- a/mdk-stage1/slang/slospath.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* Pathname intrinsic functions */
-/* Copyright (c) 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static void path_concat (char *a, char *b)
-{
-   SLang_push_malloced_string (SLpath_dircat (a,b));
-}
-
-static void path_extname (char *path)
-{
-#ifdef VMS
-   char *p;
-#endif
-
-   path = SLpath_extname (path);
-#ifndef VMS
-   SLang_push_string (path);
-#else
-   p = strchr (path, ';');
-   if (p == NULL)
-     (void)SLang_push_string (p);
-   else
-     (void)SLang_push_malloced_string (SLmake_nstring (path, (unsigned int)(p - path)));
-#endif
-}
-
-static void path_basename (char *path)
-{
-   (void) SLang_push_string (SLpath_basename (path));
-}
-
-static void path_dirname (char *path)
-{
-   (void) SLang_push_malloced_string (SLpath_dirname (path));
-}
-
-static void path_sans_extname (char *path)
-{
-   (void) SLang_push_malloced_string (SLpath_pathname_sans_extname (path));
-}
-
-
-
-static SLang_Intrin_Fun_Type Path_Name_Table [] =
-{
-   MAKE_INTRINSIC_SS("path_concat", path_concat, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("path_extname", path_extname, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("path_dirname", path_dirname, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("path_basename", path_basename, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("path_sans_extname", path_sans_extname, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("path_is_absolute", SLpath_is_absolute_path, SLANG_INT_TYPE),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-int SLang_init_ospath (void)
-{
-   if (-1 == SLadd_intrin_fun_table(Path_Name_Table, "__OSPATH__"))
-     return -1;
-   
-   return 0;
-}
-
-
diff --git a/mdk-stage1/slang/slpack.c b/mdk-stage1/slang/slpack.c
deleted file mode 100644
index 53ef63643..000000000
--- a/mdk-stage1/slang/slpack.c
+++ /dev/null
@@ -1,785 +0,0 @@
-/* Pack objects as a binary string */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include <ctype.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifndef isdigit
-# define isdigit(c) (((c)>='0')&&((c)<= '9'))
-#endif
-#ifndef isspace
-# define isspace(c) (((c)==' ') || ((c)=='\t') || ((c)=='\n'))
-#endif
-
-/* format description:
- *
- *    s = string (null padded)
- *    S = string (space padded)
- *    c = signed char
- *    C = unsigned char
- *    h = short
- *    H = unsigned short
- *    i = int
- *    I = unsigned int
- *    l = long
- *    L = unsigned long
- *    j = 16 bit signed integer (short)
- *    J = 16 bit unsigned integer (short)
- *    k = 32 bit signed integer (long)
- *    K = 32 bit unsigned integer (long)
- *    f = float (native format)
- *    F = 32 bit double
- *    d = double (native format)
- *    D = 64 bit double
- *    x = null pad byte
- *    > = big-endian mode
- *    < = little-endian mode
- *    = = native mode
- */
-
-#define NATIVE_ORDER		0
-#define BIGENDIAN_ORDER		1
-#define LILENDIAN_ORDER		2
-static int Native_Byte_Order = NATIVE_ORDER;
-
-typedef struct
-{
-   char format_type;
-   unsigned char data_type;
-   unsigned int repeat;
-   unsigned int sizeof_type;
-   char pad;
-   int byteorder;
-   int is_scalar;
-}
-Format_Type;
-
-static int get_int_type_for_size (unsigned int size, unsigned char *s, unsigned char *u)
-{
-   if (sizeof (int) == size)
-     {
-	if (s != NULL) *s = SLANG_INT_TYPE;
-	if (u != NULL) *u = SLANG_UINT_TYPE;
-	return 0;
-     }
-
-   if (sizeof (short) == size)
-     {
-	if (s != NULL) *s = SLANG_SHORT_TYPE;
-	if (u != NULL) *u = SLANG_USHORT_TYPE;
-	return 1;
-     }
-
-   if (sizeof (long) == size)
-     {
-	if (s != NULL) *s = SLANG_LONG_TYPE;
-	if (u != NULL) *u = SLANG_ULONG_TYPE;
-	return 1;
-     }
-
-   if (s != NULL) *s = 0;
-   if (u != NULL) *u = 0;
-   SLang_verror (SL_NOT_IMPLEMENTED,
-		 "This OS does not support a %u byte int", size);
-   return -1;
-}
-
-static int get_float_type_for_size (unsigned int size, unsigned char *s)
-{
-   if (sizeof (float) == size)
-     {
-	*s = SLANG_FLOAT_TYPE;
-	return 0;
-     }
-
-   if (sizeof (double) == size)
-     {
-	*s = SLANG_DOUBLE_TYPE;
-	return 0;
-     }
-
-   SLang_verror (SL_NOT_IMPLEMENTED,
-		 "This OS does not support a %u byte float", size);
-   return -1;
-}
-
-static int parse_a_format (char **format, Format_Type *ft)
-{
-   char *f;
-   char ch;
-   unsigned repeat;
-
-   f = *format;
-
-   while (((ch = *f++) != 0)
-	  && isspace (ch))
-     ;
-
-   switch (ch)
-     {
-      default:
-	ft->byteorder = NATIVE_ORDER;
-	break;
-
-      case '=':
-	ft->byteorder = NATIVE_ORDER;
-	ch = *f++;
-	break;
-
-      case '>':
-	ft->byteorder = BIGENDIAN_ORDER;
-	ch = *f++;
-	break;
-
-      case '<':
-	ft->byteorder = LILENDIAN_ORDER;
-	ch = *f++;
-	break;
-     }
-
-   if (ch == 0)
-     {
-	f--;
-	*format = f;
-	return 0;
-     }
-
-   ft->format_type = ch;
-   ft->repeat = 1;
-
-   if (isdigit (*f))
-     {
-	repeat = (unsigned int) (*f - '0');
-	f++;
-
-	while (isdigit (*f))
-	  {
-	     unsigned int repeat10 = 10 * repeat + (unsigned int)(*f - '0');
-
-	     /* Check overflow */
-	     if (repeat != repeat10 / 10)
-	       {
-		  SLang_verror (SL_OVERFLOW,
-				"Repeat count too large in [un]pack format");
-		  return -1;
-	       }
-	     repeat = repeat10;
-	     f++;
-	  }
-	ft->repeat = repeat;
-     }
-
-   *format = f;
-
-   ft->is_scalar = 1;
-   ft->pad = 0;
-
-   switch (ft->format_type)
-     {
-      default:
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "[un]pack format character '%c' not supported", ft->format_type);
-	return -1;
-
-      case 'D':
-	ft->sizeof_type = 8;
-	if (-1 == get_float_type_for_size (8, &ft->data_type))
-	  return -1;
-	break;
-
-      case 'd':
-	ft->data_type = SLANG_DOUBLE_TYPE;
-	ft->sizeof_type = sizeof (double);
-	break;
-
-      case 'F':
-	ft->sizeof_type = 4;
-	if (-1 == get_float_type_for_size (4, &ft->data_type))
-	  return -1;
-	break;
-      case 'f':
-	ft->data_type = SLANG_FLOAT_TYPE;
-	ft->sizeof_type = sizeof (float);
-	break;
-
-      case 'h':
-	ft->data_type = SLANG_SHORT_TYPE;
-	ft->sizeof_type = sizeof (short);
-	break;
-      case 'H':
-	ft->data_type = SLANG_USHORT_TYPE;
-	ft->sizeof_type = sizeof (unsigned short);
-	break;
-      case 'i':
-	ft->data_type = SLANG_INT_TYPE;
-	ft->sizeof_type = sizeof (int);
-	break;
-      case 'I':
-	ft->data_type = SLANG_UINT_TYPE;
-	ft->sizeof_type = sizeof (unsigned int);
-	break;
-      case 'l':
-	ft->data_type = SLANG_LONG_TYPE;
-	ft->sizeof_type = sizeof (long);
-	break;
-      case 'L':
-	ft->data_type = SLANG_ULONG_TYPE;
-	ft->sizeof_type = sizeof (unsigned long);
-	break;
-
-	/* 16 bit ints */
-      case 'j':
-	ft->sizeof_type = 2;
-	if (-1 == get_int_type_for_size (2, &ft->data_type, NULL))
-	  return -1;
-	break;
-      case 'J':
-	ft->sizeof_type = 2;
-	if (-1 == get_int_type_for_size (2, NULL, &ft->data_type))
-	  return -1;
-	break;
-
-	/* 32 bit ints */
-      case 'k':
-	ft->sizeof_type = 4;
-	if (-1 == get_int_type_for_size (4, &ft->data_type, NULL))
-	  return -1;
-	break;
-      case 'K':
-	ft->sizeof_type = 4;
-	if (-1 == get_int_type_for_size (4, NULL, &ft->data_type))
-	  return -1;
-	break;
-
-      case 'x':
-	ft->sizeof_type = 1;
-	ft->data_type = 0;
-	break;
-
-      case 'c':
-	ft->sizeof_type = 1;
-	ft->data_type = SLANG_CHAR_TYPE;
-	break;
-
-      case 'C':
-	ft->data_type = SLANG_UCHAR_TYPE;
-	ft->sizeof_type = 1;
-	break;
-
-      case 'S':
-      case 'A':
-	ft->pad = ' ';
-      case 'a':
-      case 's':
-	ft->data_type = SLANG_BSTRING_TYPE;
-	ft->sizeof_type = 1;
-	ft->is_scalar = 0;
-	break;
-     }
-   return 1;
-}
-
-static int compute_size_for_format (char *format, unsigned int *num_bytes)
-{
-   unsigned int size;
-   Format_Type ft;
-   int status;
-
-   *num_bytes = size = 0;
-
-   while (1 == (status = parse_a_format (&format, &ft)))
-     size += ft.repeat * ft.sizeof_type;
-
-   *num_bytes = size;
-   return status;
-}
-
-static void byte_swap64 (unsigned char *ss, unsigned int n) /*{{{*/
-{
-   unsigned char *p, *pmax, ch;
-
-   if (n == 0) return;
-   p = (unsigned char *) ss;
-   pmax = p + 8 * n;
-   while (p < pmax)
-     {
-	ch = *p;
-	*p = *(p + 7);
-	*(p + 7) = ch;
-
-	ch = *(p + 6);
-	*(p + 6) = *(p + 1);
-	*(p + 1) = ch;
-
-	ch = *(p + 5);
-	*(p + 5) = *(p + 2);
-	*(p + 2) = ch;
-
-	ch = *(p + 4);
-	*(p + 4) = *(p + 3);
-	*(p + 3) = ch;
-
-	p += 8;
-     }
-}
-
-/*}}}*/
-static void byte_swap32 (unsigned char *ss, unsigned int n) /*{{{*/
-{
-   unsigned char *p, *pmax, ch;
-
-   p = (unsigned char *) ss;
-   pmax = p + 4 * n;
-   while (p < pmax)
-     {
-	ch = *p;
-	*p = *(p + 3);
-	*(p + 3) = ch;
-
-	ch = *(p + 1);
-	*(p + 1) = *(p + 2);
-	*(p + 2) = ch;
-	p += 4;
-     }
-}
-
-/*}}}*/
-static void byte_swap16 (unsigned char *p, unsigned int nread) /*{{{*/
-{
-   unsigned char *pmax, ch;
-
-   pmax = p + 2 * nread;
-   while (p < pmax)
-     {
-	ch = *p;
-	*p = *(p + 1);
-	*(p + 1) = ch;
-	p += 2;
-     }
-}
-
-/*}}}*/
-
-static int byteswap (int order, unsigned char *b,  unsigned int size, unsigned int num)
-{
-   if (Native_Byte_Order == order)
-     return 0;
-
-   switch (size)
-     {
-      case 2:
-	byte_swap16 (b, num);
-	break;
-      case 4:
-	byte_swap32 (b, num);
-	break;
-      case 8:
-	byte_swap64 (b, num);
-	break;
-      default:
-	return -1;
-     }
-
-   return 0;
-}
-
-static void check_native_byte_order (void)
-{
-   unsigned short x;
-
-   if (Native_Byte_Order != NATIVE_ORDER)
-     return;
-
-   x = 0xFF;
-   if (*(unsigned char *)&x == 0xFF)
-     Native_Byte_Order = LILENDIAN_ORDER;
-   else
-     Native_Byte_Order = BIGENDIAN_ORDER;
-}
-
-static SLang_BString_Type *
-pack_according_to_format (char *format, unsigned int nitems)
-{
-   unsigned int size, num;
-   unsigned char *buf, *b;
-   SLang_BString_Type *bs;
-   Format_Type ft;
-
-   buf = NULL;
-
-   if (-1 == compute_size_for_format (format, &size))
-     goto return_error;
-
-   if (NULL == (buf = (unsigned char *) SLmalloc (size + 1)))
-     goto return_error;
-
-   b = buf;
-
-   while (1 == parse_a_format (&format, &ft))
-     {
-	unsigned char *ptr;
-	unsigned int repeat;
-
-	repeat = ft.repeat;
-	if (ft.data_type == 0)
-	  {
-	     memset ((char *) b, ft.pad, repeat);
-	     b += repeat;
-	     continue;
-	  }
-
-	if (ft.is_scalar)
-	  {
-	     unsigned char *bstart;
-	     num = repeat;
-
-	     bstart = b;
-	     while (repeat != 0)
-	       {
-		  unsigned int nelements;
-		  SLang_Array_Type *at;
-
-		  if (nitems == 0)
-		    {
-		       SLang_verror (SL_INVALID_PARM,
-				     "Not enough items for pack format");
-		       goto return_error;
-		    }
-
-		  if (-1 == SLang_pop_array_of_type (&at, ft.data_type))
-		    goto return_error;
-
-		  nelements = at->num_elements;
-		  if (repeat < nelements)
-		    nelements = repeat;
-		  repeat -= nelements;
-
-		  nelements = nelements * ft.sizeof_type;
-		  memcpy ((char *)b, (char *)at->data, nelements);
-
-		  b += nelements;
-		  SLang_free_array (at);
-		  nitems--;
-	       }
-
-	     if (ft.byteorder != NATIVE_ORDER)
-	       byteswap (ft.byteorder, bstart, ft.sizeof_type, num);
-
-	     continue;
-	  }
-
-	/* Otherwise we have a string */
-	if (-1 == SLang_pop_bstring (&bs))
-	  goto return_error;
-
-	ptr = SLbstring_get_pointer (bs, &num);
-	if (repeat < num) num = repeat;
-	memcpy ((char *)b, (char *)ptr, num);
-	b += num;
-	repeat -= num;
-	memset ((char *)b, ft.pad, repeat);
-	SLbstring_free (bs);
-	b += repeat;
-	nitems--;
-     }
-
-   *b = 0;
-   bs = SLbstring_create_malloced (buf, size, 0);
-   if (bs == NULL)
-     goto return_error;
-
-   SLdo_pop_n (nitems);
-   return bs;
-
-   return_error:
-   SLdo_pop_n (nitems);
-   if (buf != NULL)
-     SLfree ((char *) buf);
-
-   return NULL;
-}
-
-void _SLpack (void)
-{
-   SLang_BString_Type *bs;
-   char *fmt;
-   int nitems;
-
-   check_native_byte_order ();
-
-   nitems = SLang_Num_Function_Args;
-   if (nitems <= 0)
-     {
-	SLang_verror (SL_SYNTAX_ERROR,
-		      "pack: not enough arguments");
-	return;
-     }
-
-   if ((-1 == SLreverse_stack (nitems))
-       || (-1 == SLang_pop_slstring (&fmt)))
-     bs = NULL;
-   else
-     {
-	bs = pack_according_to_format (fmt, (unsigned int)nitems - 1);
-	SLang_free_slstring (fmt);
-     }
-
-   SLang_push_bstring (bs);
-   SLbstring_free (bs);
-}
-
-void _SLunpack (char *format, SLang_BString_Type *bs)
-{
-   Format_Type ft;
-   unsigned char *b;
-   unsigned int len;
-   unsigned int num_bytes;
-
-   check_native_byte_order ();
-
-   if (-1 == compute_size_for_format (format, &num_bytes))
-     return;
-
-   b = SLbstring_get_pointer (bs, &len);
-   if (b == NULL)
-     return;
-
-   if (len < num_bytes)
-     {
-	SLang_verror (SL_INVALID_PARM,
-		      "unpack format %s is too large for input string",
-		      format);
-	return;
-     }
-
-   while (1 == parse_a_format (&format, &ft))
-     {
-	char *str, *s;
-
-	if (ft.repeat == 0)
-	  continue;
-
-	if (ft.data_type == 0)
-	  {			       /* skip padding */
-	     b += ft.repeat;
-	     continue;
-	  }
-
-	if (ft.is_scalar)
-	  {
-	     SLang_Array_Type *at;
-	     int dims;
-
-	     if (ft.repeat == 1)
-	       {
-		  SLang_Class_Type *cl;
-
-		  cl = _SLclass_get_class (ft.data_type);
-		  memcpy ((char *)cl->cl_transfer_buf, (char *)b, ft.sizeof_type);
-		  if (ft.byteorder != NATIVE_ORDER)
-		    byteswap (ft.byteorder, (unsigned char *)cl->cl_transfer_buf, ft.sizeof_type, 1);
-
-		  if (-1 == (cl->cl_apush (ft.data_type, cl->cl_transfer_buf)))
-		    return;
-		  b += ft.sizeof_type;
-		  continue;
-	       }
-
-	     dims = (int) ft.repeat;
-	     at = SLang_create_array (ft.data_type, 0, NULL, &dims, 1);
-	     if (at == NULL)
-	       return;
-
-	     num_bytes = ft.repeat * ft.sizeof_type;
-	     memcpy ((char *)at->data, (char *)b, num_bytes);
-	     if (ft.byteorder != NATIVE_ORDER)
-	       byteswap (ft.byteorder, (unsigned char *)at->data, ft.sizeof_type, ft.repeat);
-
-	     if (-1 == SLang_push_array (at, 1))
-	       return;
-
-	     b += num_bytes;
-	     continue;
-	  }
-
-	len = ft.repeat;
-	str = SLmalloc (len + 1);
-	if (str == NULL)
-	  return;
-
-	memcpy ((char *) str, (char *)b, len);
-	str [len] = 0;
-
-	if (ft.pad == ' ')
-	  {
-	     unsigned int new_len;
-
-	     s = str + len;
-	     while (s > str)
-	       {
-		  s--;
-		  if ((*s != ' ') && (*s != 0))
-		    {
-		       s++;
-		       break;
-		    }
-		  *s = 0;
-	       }
-	     new_len = (unsigned int) (s - str);
-
-	     if (new_len != len)
-	       {
-		  s = SLrealloc (str, new_len + 1);
-		  if (s == NULL)
-		    {
-		       SLfree (str);
-		       return;
-		    }
-		  str = s;
-		  len = new_len;
-	       }
-	  }
-
-	/* Avoid a bstring if possible */
-	s = SLmemchr (str, 0, len);
-	if (s == NULL)
-	  {
-	     if (-1 == SLang_push_malloced_string (str))
-	       return;
-	  }
-	else
-	  {
-	     SLang_BString_Type *new_bs;
-
-	     new_bs = SLbstring_create_malloced ((unsigned char *)str, len, 1);
-	     if (new_bs == NULL)
-	       return;
-
-	     if (-1 == SLang_push_bstring (new_bs))
-	       {
-		  SLfree (str);
-		  return;
-	       }
-	     SLbstring_free (new_bs);
-	  }
-
-	b += ft.repeat;
-     }
-}
-
-unsigned int _SLpack_compute_size (char *format)
-{
-   unsigned int n;
-
-   n = 0;
-   (void) compute_size_for_format (format, &n);
-   return n;
-}
-
-void _SLpack_pad_format (char *format)
-{
-   unsigned int len, max_len;
-   Format_Type ft;
-   char *buf, *b;
-
-   check_native_byte_order ();
-
-   /* Just check the syntax */
-   if (-1 == compute_size_for_format (format, &max_len))
-     return;
-
-   /* This should be sufficient to handle any needed xyy padding characters.
-    * I cannot see how this will be overrun
-    */
-   max_len = 4 * (strlen (format) + 1);
-   if (NULL == (buf = SLmalloc (max_len + 1)))
-     return;
-
-   b = buf;
-   len = 0;
-   while (1 == parse_a_format (&format, &ft))
-     {
-	struct { char a; short b; } s_h;
-	struct { char a; int b; } s_i;
-	struct { char a; long b; } s_l;
-	struct { char a; float b; } s_f;
-	struct { char a; double b; } s_d;
-	unsigned int pad;
-
-	if (ft.repeat == 0)
-	  continue;
-
-	if (ft.data_type == 0)
-	  {			       /* pad */
-	     sprintf (b, "x%u", ft.repeat);
-	     b += strlen (b);
-	     len += ft.repeat;
-	     continue;
-	  }
-
-	switch (ft.data_type)
-	  {
-	   default:
-	   case SLANG_STRING_TYPE:
-	   case SLANG_BSTRING_TYPE:
-	   case SLANG_CHAR_TYPE:
-	   case SLANG_UCHAR_TYPE:
-	     pad = 0;
-	     break;
-
-	   case SLANG_SHORT_TYPE:
-	   case SLANG_USHORT_TYPE:
-	     pad = ((unsigned int) ((char *)&s_h.b - (char *)&s_h.a));
-	     break;
-
-	   case SLANG_INT_TYPE:
-	   case SLANG_UINT_TYPE:
-	     pad = ((unsigned int) ((char *)&s_i.b - (char *)&s_i.a));
-	     break;
-
-	   case SLANG_LONG_TYPE:
-	   case SLANG_ULONG_TYPE:
-	     pad = ((unsigned int) ((char *)&s_l.b - (char *)&s_l.a));
-	     break;
-
-	   case SLANG_FLOAT_TYPE:
-	     pad = ((unsigned int) ((char *)&s_f.b - (char *)&s_f.a));
-	     break;
-
-	   case SLANG_DOUBLE_TYPE:
-	     pad = ((unsigned int) ((char *)&s_d.b - (char *)&s_d.a));
-	     break;
-	  }
-
-	/* Pad to a length that is an integer multiple of pad. */
-	if (pad)
-	  pad = pad * ((len + pad - 1)/pad) - len;
-
-	if (pad)
-	  {
-	     sprintf (b, "x%u", pad);
-	     b += strlen (b);
-	     len += pad;
-	  }
-
-	*b++ = ft.format_type;
-	if (ft.repeat > 1)
-	  {
-	     sprintf (b, "%u", ft.repeat);
-	     b += strlen (b);
-	  }
-
-	len += ft.repeat * ft.sizeof_type;
-     }
-   *b = 0;
-
-   (void) SLang_push_malloced_string (buf);
-}
diff --git a/mdk-stage1/slang/slparse.c b/mdk-stage1/slang/slparse.c
deleted file mode 100644
index bc709d1fb..000000000
--- a/mdk-stage1/slang/slparse.c
+++ /dev/null
@@ -1,1970 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static SLang_Load_Type *LLT;
-int _SLang_Compile_Line_Num_Info;
-
-static void free_token (_SLang_Token_Type *t)
-{
-   register unsigned int nrefs = t->num_refs;
-
-   if (nrefs == 0)
-     return;
-
-   if (nrefs == 1)
-     {
-	if (t->free_sval_flag)
-	  {
-	     if (t->type == BSTRING_TOKEN)
-	       SLbstring_free (t->v.b_val);
-	     else
-	       _SLfree_hashed_string (t->v.s_val, strlen (t->v.s_val), t->hash);
-	     t->v.s_val = NULL;
-	  }
-     }
-
-   t->num_refs = nrefs - 1;
-}
-
-static void init_token (_SLang_Token_Type *t)
-{
-   memset ((char *) t, 0, sizeof (_SLang_Token_Type));
-#if _SLANG_HAS_DEBUG_CODE
-   t->line_number = -1;
-#endif
-}
-
-/* Allow room for one push back of a token.  This is necessary for
- * multiple assignment.
- */
-static unsigned int Use_Next_Token;
-static _SLang_Token_Type Next_Token;
-#if _SLANG_HAS_DEBUG_CODE
-static int Last_Line_Number = -1;
-#endif
-
-static int unget_token (_SLang_Token_Type *ctok)
-{
-   if (SLang_Error)
-     return -1;
-   if (Use_Next_Token != 0)
-     {
-	_SLparse_error ("unget_token failed", ctok, 0);
-	return -1;
-     }
-
-   Use_Next_Token++;
-   Next_Token = *ctok;
-   init_token (ctok);
-   return 0;
-}
-
-static int get_token (_SLang_Token_Type *ctok)
-{
-   if (ctok->num_refs)
-     free_token (ctok);
-
-   if (Use_Next_Token)
-     {
-	Use_Next_Token--;
-	*ctok = Next_Token;
-	return ctok->type;
-     }
-
-   return _SLget_token (ctok);
-}
-
-static int compile_token (_SLang_Token_Type *t)
-{
-#if _SLANG_HAS_DEBUG_CODE
-   if (_SLang_Compile_Line_Num_Info
-       && (t->line_number != Last_Line_Number)
-       && (t->line_number != -1))
-     {
-	_SLang_Token_Type tok;
-	tok.type = LINE_NUM_TOKEN;
-	tok.v.long_val = Last_Line_Number = t->line_number;
-	(*_SLcompile_ptr) (&tok);
-     }
-#endif
-   (*_SLcompile_ptr) (t);
-   return 0;
-}
-
-typedef struct
-{
-#define USE_PARANOID_MAGIC	0
-#if USE_PARANOID_MAGIC
-   unsigned long magic;
-#endif
-   _SLang_Token_Type *stack;
-   unsigned int len;
-   unsigned int size;
-}
-Token_List_Type;
-
-#define MAX_TOKEN_LISTS 16
-static Token_List_Type Token_List_Stack [MAX_TOKEN_LISTS];
-static unsigned int Token_List_Stack_Depth = 0;
-static Token_List_Type *Token_List = NULL;
-
-static void init_token_list (Token_List_Type *t)
-{
-   t->size = 0;
-   t->len = 0;
-   t->stack = NULL;
-#if USE_PARANOID_MAGIC
-   t->magic = 0xABCDEF12;
-#endif
-}
-
-static void free_token_list (Token_List_Type *t)
-{
-   _SLang_Token_Type *s;
-
-   if (t == NULL)
-     return;
-#if USE_PARANOID_MAGIC
-   if (t->magic != 0xABCDEF12)
-     {
-	SLang_doerror ("Magic error.");
-	return;
-     }
-#endif
-   s = t->stack;
-   if (s != NULL)
-     {
-	_SLang_Token_Type *smax = s + t->len;
-	while (s != smax)
-	  {
-	     if (s->num_refs) free_token (s);
-	     s++;
-	  }
-
-	SLfree ((char *) t->stack);
-     }
-
-   memset ((char *) t, 0, sizeof (Token_List_Type));
-}
-
-static Token_List_Type *push_token_list (void)
-{
-   if (Token_List_Stack_Depth == MAX_TOKEN_LISTS)
-     {
-	_SLparse_error ("Token list stack size exceeded", NULL, 0);
-	return NULL;
-     }
-
-   Token_List = Token_List_Stack + Token_List_Stack_Depth;
-   Token_List_Stack_Depth++;
-   init_token_list (Token_List);
-   return Token_List;
-}
-
-static int pop_token_list (int do_free)
-{
-   if (Token_List_Stack_Depth == 0)
-     {
-	if (SLang_Error == 0)
-	  _SLparse_error ("Token list stack underflow", NULL, 0);
-	return -1;
-     }
-   Token_List_Stack_Depth--;
-
-   if (do_free) free_token_list (Token_List);
-
-   if (Token_List_Stack_Depth != 0)
-     Token_List = Token_List_Stack + (Token_List_Stack_Depth - 1);
-   else
-     Token_List = NULL;
-
-   return 0;
-}
-
-static int check_token_list_space (Token_List_Type *t, unsigned int delta_size)
-{
-   _SLang_Token_Type *st;
-   unsigned int len;
-#if USE_PARANOID_MAGIC
-   if (t->magic != 0xABCDEF12)
-     {
-	SLang_doerror ("Magic error.");
-	return -1;
-     }
-#endif
-   len = t->len + delta_size;
-   if (len <= t->size) return 0;
-
-   if (delta_size < 4)
-     {
-	delta_size = 4;
-	len = t->len + delta_size;
-     }
-
-   st = (_SLang_Token_Type *) SLrealloc((char *) t->stack,
-					len * sizeof(_SLang_Token_Type));
-   if (st == NULL)
-     {
-	_SLparse_error ("Malloc error", NULL, 0);
-	return -1;
-     }
-
-   memset ((char *) (st + t->len), 0, delta_size);
-
-   t->stack = st;
-   t->size = len;
-   return 0;
-}
-
-static int append_token (_SLang_Token_Type *t)
-{
-   if (-1 == check_token_list_space (Token_List, 1))
-     return -1;
-
-   Token_List->stack [Token_List->len] = *t;
-   Token_List->len += 1;
-   t->num_refs = 0;		       /* stealing it */
-   return 0;
-}
-
-static int append_token_of_type (unsigned char t)
-{
-   _SLang_Token_Type *tok;
-
-   if (-1 == check_token_list_space (Token_List, 1))
-     return -1;
-
-   /* The memset when the list was created ensures that the other fields
-    * are properly initialized.
-    */
-   tok = Token_List->stack + Token_List->len;
-   init_token (tok);
-   tok->type = t;
-   Token_List->len += 1;
-   return 0;
-}
-
-static _SLang_Token_Type *get_last_token (void)
-{
-   unsigned int len;
-
-   if ((Token_List == NULL)
-       || (0 == (len = Token_List->len)))
-     return NULL;
-
-   len--;
-   return Token_List->stack + len;
-}
-
-/* This function does NOT free the list. */
-static int compile_token_list_with_fun (int dir, Token_List_Type *list,
-					int (*f)(_SLang_Token_Type *))
-{
-   _SLang_Token_Type *t0, *t1;
-
-   if (list == NULL)
-     return -1;
-
-   if (f == NULL)
-     f = compile_token;
-
-   t0 = list->stack;
-   t1 = t0 + list->len;
-
-   if (dir < 0)
-     {
-	/* backwards */
-
-	while ((SLang_Error == 0) && (t1 > t0))
-	  {
-	     t1--;
-	     (*f) (t1);
-	  }
-	return 0;
-     }
-
-   /* forward */
-   while ((SLang_Error == 0) && (t0 < t1))
-     {
-	(*f) (t0);
-	t0++;
-     }
-   return 0;
-}
-
-static int compile_token_list (void)
-{
-   if (Token_List == NULL)
-     return -1;
-
-   compile_token_list_with_fun (1, Token_List, NULL);
-   pop_token_list (1);
-   return 0;
-}
-
-/* Take all elements in the list from pos2 to the end and exchange them
- * with the elements at pos1, e.g.,
- * ...ABCDEabc ==> ...abcABCDE
- * where pos1 denotes A and pos2 denotes a.
- */
-static int token_list_element_exchange (unsigned int pos1, unsigned int pos2)
-{
-   _SLang_Token_Type *s, *s1, *s2;
-   unsigned int len, nloops;
-
-   if (Token_List == NULL)
-     return -1;
-
-   s = Token_List->stack;
-   len = Token_List->len;
-
-   if ((s == NULL) || (len == 0)
-       || (pos2 >= len))
-     return -1;
-
-   /* This may not be the most efficient algorithm but the number to swap
-    * is most-likely going to be small, e.g, 3
-    * The algorithm is to rotate the list.  The particular rotation
-    * direction was chosen to make insert_token fast.
-    * It works like:
-    * @ ABCabcde --> BCabcdeA --> CabcdeAB -->  abcdefAB
-    * which is optimal for Abcdef sequence produced by function calls.
-    *
-    * Profiling indicates that nloops is almost always 1, whereas the inner
-    * loop can loop many times (e.g., 9 times).
-    */
-
-   s2 = s + (len - 1);
-   s1 = s + pos1;
-   nloops = pos2 - pos1;
-
-   while (nloops)
-     {
-	_SLang_Token_Type save;
-
-	s = s1;
-	save = *s;
-
-	while (s < s2)
-	  {
-	     *s = *(s + 1);
-	     s++;
-	  }
-	*s = save;
-
-	nloops--;
-     }
-   return 0;
-}
-
-#if 0
-static int insert_token (_SLang_Token_Type *t, unsigned int pos)
-{
-   if (-1 == append_token (t))
-     return -1;
-
-   return token_list_element_exchange (pos, Token_List->len - 1);
-}
-#endif
-static void compile_token_of_type (unsigned char t)
-{
-   _SLang_Token_Type tok;
-
-#if _SLANG_HAS_DEBUG_CODE
-   tok.line_number = -1;
-#endif
-   tok.type = t;
-   compile_token(&tok);
-}
-
-static void statement (_SLang_Token_Type *);
-static void compound_statement (_SLang_Token_Type *);
-static void expression_with_parenthesis (_SLang_Token_Type *);
-static void handle_semicolon (_SLang_Token_Type *);
-static void statement_list (_SLang_Token_Type *);
-static void variable_list (_SLang_Token_Type *, unsigned char);
-static void struct_declaration (_SLang_Token_Type *);
-static void define_function_args (_SLang_Token_Type *);
-static void typedef_definition (_SLang_Token_Type *);
-static void function_args_expression (_SLang_Token_Type *, int);
-static void expression (_SLang_Token_Type *);
-static void expression_with_commas (_SLang_Token_Type *, int);
-static void simple_expression (_SLang_Token_Type *);
-static void unary_expression (_SLang_Token_Type *);
-static void postfix_expression (_SLang_Token_Type *);
-static int check_for_lvalue (unsigned char, _SLang_Token_Type *);
-/* static void primary_expression (_SLang_Token_Type *); */
-static void block (_SLang_Token_Type *);
-static void inline_array_expression (_SLang_Token_Type *);
-static void array_index_expression (_SLang_Token_Type *);
-static void do_multiple_assignment (_SLang_Token_Type *);
-static void try_multiple_assignment (_SLang_Token_Type *);
-#if 0
-static void not_implemented (char *what)
-{
-   char err [256];
-   sprintf (err, "Expression not implemented: %s", what);
-   _SLparse_error (err, NULL, 0);
-}
-#endif
-static void rpn_parse_line (_SLang_Token_Type *tok)
-{
-   do
-     {
-	  /* multiple RPN tokens possible when the file looks like:
-	   * . <end of line>
-	   * . <end of line>
-	   */
-	if (tok->type != RPN_TOKEN)
-	  compile_token (tok);
-	free_token (tok);
-     }
-   while (EOF_TOKEN != _SLget_rpn_token (tok));
-}
-
-static int get_identifier_token (_SLang_Token_Type *tok)
-{
-   if (IDENT_TOKEN == get_token (tok))
-     return IDENT_TOKEN;
-
-   _SLparse_error ("Expecting identifier", tok, 0);
-   return tok->type;
-}
-
-static void define_function (_SLang_Token_Type *ctok, unsigned char type)
-{
-   _SLang_Token_Type fname;
-   
-   switch (type)
-     {
-      case STATIC_TOKEN:
-	type = DEFINE_STATIC_TOKEN;
-	break;
-	
-      case PUBLIC_TOKEN:
-	type = DEFINE_PUBLIC_TOKEN;
-	break;
-	
-      case PRIVATE_TOKEN:
-	type = DEFINE_PRIVATE_TOKEN;
-     }
-
-   init_token (&fname);
-   if (IDENT_TOKEN != get_identifier_token (&fname))
-     {
-	free_token (&fname);
-	return;
-     }
-
-   compile_token_of_type(OPAREN_TOKEN);
-   get_token (ctok);
-   define_function_args (ctok);
-   compile_token_of_type(FARG_TOKEN);
-
-   if (ctok->type == OBRACE_TOKEN)
-     compound_statement(ctok);
-
-   else if (ctok->type != SEMICOLON_TOKEN)
-     {
-	_SLparse_error("Expecting {", ctok, 0);
-	free_token (&fname);
-	return;
-     }
-
-   fname.type = type;
-   compile_token (&fname);
-   free_token (&fname);
-}
-
-/* statement:
- *	 compound-statement
- *	 if ( expression ) statement
- *	 if ( expression ) statement else statement
- *	 !if ( expression ) statement
- *	 loop ( expression ) statement
- *	 _for ( expression ) statement
- *       foreach ( expression ) statement
- *       foreach (expression ) using (expression-list) statement
- *	 while ( expression ) statement
- *	 do statement while (expression) ;
- *	 for ( expressionopt ; expressionopt ; expressionopt ) statement
- *	 ERROR_BLOCK statement
- *	 EXIT_BLOCK statement
- *	 USER_BLOCK0 statement
- *	 USER_BLOCK1 statement
- *	 USER_BLOCK2 statement
- *	 USER_BLOCK3 statement
- *	 USER_BLOCK4 statement
- *	 forever statement
- *	 break ;
- *	 continue ;
- *	 return expressionopt ;
- *	 variable variable-list ;
- *	 struct struct-decl ;
- *	 define identifier function-args ;
- *	 define identifier function-args compound-statement
- *	 switch ( expression ) statement
- *	 rpn-line
- *	 at-line
- *	 push ( expression )
- *	 ( expression ) = expression ;
- *	 expression ;
- *       expression :
- */
-
-/* Note: This function does not return with a new token.  It is up to the
- * calling routine to handle that.
- */
-static void statement (_SLang_Token_Type *ctok)
-{
-   unsigned char type;
-
-   if (SLang_Error)
-     return;
-
-   LLT->parse_level += 1;
-
-   switch (ctok->type)
-     {
-      case OBRACE_TOKEN:
-	compound_statement (ctok);
-	break;
-
-      case IF_TOKEN:
-      case IFNOT_TOKEN:
-	type = ctok->type;
-	get_token (ctok);
-	expression_with_parenthesis (ctok);
-	block (ctok);
-
-	if (ELSE_TOKEN != get_token (ctok))
-	  {
-	     compile_token_of_type (type);
-	     unget_token (ctok);
-	     break;
-	  }
-	get_token (ctok);
-	block (ctok);
-	if (type == IF_TOKEN) type = ELSE_TOKEN; else type = NOTELSE_TOKEN;
-	compile_token_of_type (type);
-	break;
-
-      /* case IFNOT_TOKEN: */
-      case LOOP_TOKEN:
-      case _FOR_TOKEN:
-	type = ctok->type;
-	get_token (ctok);
-	expression_with_parenthesis (ctok);
-	block (ctok);
-	compile_token_of_type (type);
-	break;
-
-      case FOREACH_TOKEN:
-	get_token (ctok);
-	expression_with_parenthesis (ctok);
-
-	if (NULL == push_token_list ())
-	  break;
-
-	append_token_of_type (ARG_TOKEN);
-	if (ctok->type == USING_TOKEN)
-	  {
-	     if (OPAREN_TOKEN != get_token (ctok))
-	       {
-		  _SLparse_error ("Expected 'using ('", ctok, 0);
-		  break;
-	       }
-	     get_token (ctok);
-	     function_args_expression (ctok, 0);
-	  }
-	append_token_of_type (EARG_TOKEN);
-
-	compile_token_list ();
-
-	block (ctok);
-	compile_token_of_type (FOREACH_TOKEN);
-	break;
-
-      case WHILE_TOKEN:
-	get_token (ctok);
-	compile_token_of_type (OBRACE_TOKEN);
-	expression_with_parenthesis (ctok);
-	compile_token_of_type (CBRACE_TOKEN);
-	block (ctok);
-	compile_token_of_type (WHILE_TOKEN);
-	break;
-
-      case DO_TOKEN:
-	get_token (ctok);
-	block (ctok);
-
-	if (WHILE_TOKEN != get_token (ctok))
-	  {
-	     _SLparse_error("Expecting while", ctok, 0);
-	     break;
-	  }
-
-	get_token (ctok);
-
-	compile_token_of_type (OBRACE_TOKEN);
-	expression_with_parenthesis (ctok);
-	compile_token_of_type (CBRACE_TOKEN);
-	compile_token_of_type (DOWHILE_TOKEN);
-	handle_semicolon (ctok);
-	break;
-
-      case FOR_TOKEN:
-
-	/* Look for (exp_opt ; exp_opt ; exp_opt ) */
-
-	if (OPAREN_TOKEN != get_token (ctok))
-	  {
-	     _SLparse_error("Expecting (.", ctok, 0);
-	     break;
-	  }
-
-	if (NULL == push_token_list ())
-	  break;
-
-	append_token_of_type (OBRACE_TOKEN);
-	if (SEMICOLON_TOKEN != get_token (ctok))
-	  {
-	     expression (ctok);
-	     if (ctok->type != SEMICOLON_TOKEN)
-	       {
-		  _SLparse_error("Expecting ;", ctok, 0);
-		  break;
-	       }
-	  }
-	append_token_of_type (CBRACE_TOKEN);
-
-	append_token_of_type (OBRACE_TOKEN);
-	if (SEMICOLON_TOKEN != get_token (ctok))
-	  {
-	     expression (ctok);
-	     if (ctok->type != SEMICOLON_TOKEN)
-	       {
-		  _SLparse_error("Expecting ;", ctok, 0);
-		  break;
-	       }
-	  }
-	append_token_of_type (CBRACE_TOKEN);
-
-	append_token_of_type (OBRACE_TOKEN);
-	if (CPAREN_TOKEN != get_token (ctok))
-	  {
-	     expression (ctok);
-	     if (ctok->type != CPAREN_TOKEN)
-	       {
-		  _SLparse_error("Expecting ).", ctok, 0);
-		  break;
-	       }
-	  }
-	append_token_of_type (CBRACE_TOKEN);
-
-	compile_token_list ();
-
-	get_token (ctok);
-	block (ctok);
-	compile_token_of_type (FOR_TOKEN);
-	break;
-
-      case ERRBLK_TOKEN:
-      case EXITBLK_TOKEN:
-      case USRBLK0_TOKEN:
-      case USRBLK1_TOKEN:
-      case USRBLK2_TOKEN:
-      case USRBLK3_TOKEN:
-      case USRBLK4_TOKEN:
-      case FOREVER_TOKEN:
-	type = ctok->type;
-	get_token (ctok);
-	block (ctok);
-	compile_token_of_type (type);
-	break;
-
-      case BREAK_TOKEN:
-      case CONT_TOKEN:
-	compile_token_of_type (ctok->type);
-	get_token (ctok);
-	handle_semicolon (ctok);
-	break;
-
-      case RETURN_TOKEN:
-	if (SEMICOLON_TOKEN != get_token (ctok))
-	  {
-	     if (NULL == push_token_list ())
-	       break;
-
-	     expression (ctok);
-
-	     if (ctok->type != SEMICOLON_TOKEN)
-	       {
-		  _SLparse_error ("Expecting ;", ctok, 0);
-		  break;
-	       }
-	     compile_token_list ();
-	  }
-	compile_token_of_type (RETURN_TOKEN);
-	handle_semicolon (ctok);
-	break;
-
-      case STATIC_TOKEN:
-      case PRIVATE_TOKEN:
-      case PUBLIC_TOKEN:
-	type = ctok->type;
-	get_token (ctok);
-	if (ctok->type == VARIABLE_TOKEN)
-	  {
-	     get_token (ctok);
-	     variable_list (ctok, type);
-	     handle_semicolon (ctok);
-	     break;
-	  }
-	if (ctok->type == DEFINE_TOKEN)
-	  {
-	     define_function (ctok, type);
-	     break;
-	  }
-	_SLparse_error ("Expecting 'variable' or 'define'", ctok, 0);
-	break;
-
-      case VARIABLE_TOKEN:
-	get_token (ctok);
-	variable_list (ctok, OBRACKET_TOKEN);
-	handle_semicolon (ctok);
-	break;
-
-      case TYPEDEF_TOKEN:
-	get_token (ctok);
-	if (NULL == push_token_list ())
-	  break;
-	typedef_definition (ctok);
-	compile_token_list ();
-
-	handle_semicolon (ctok);
-	break;
-
-      case DEFINE_TOKEN:
-	define_function (ctok, DEFINE_TOKEN);
-	break;
-
-      case SWITCH_TOKEN:
-	get_token (ctok);
-	expression_with_parenthesis (ctok);
-
-	while ((SLang_Error == 0)
-	       && (OBRACE_TOKEN == ctok->type))
-	  {
-	     compile_token_of_type (OBRACE_TOKEN);
-	     compound_statement (ctok);
-	     compile_token_of_type (CBRACE_TOKEN);
-	     get_token (ctok);
-	  }
-	compile_token_of_type (SWITCH_TOKEN);
-	unget_token (ctok);
-	break;
-
-      case EOF_TOKEN:
-	break;
-#if 0
-      case PUSH_TOKEN:
-	get_token (ctok);
-	expression_list_with_parenthesis (ctok);
-	handle_semicolon (ctok);
-	break;
-#endif
-
-      case SEMICOLON_TOKEN:
-	handle_semicolon (ctok);
-	break;
-
-      case RPN_TOKEN:
-	if (POUND_TOKEN == get_token (ctok))
-	  _SLcompile_byte_compiled ();
-	else if (ctok->type != EOF_TOKEN)
-	  rpn_parse_line (ctok);
-	break;
-
-      case OPAREN_TOKEN:	       /* multiple assignment */
-	try_multiple_assignment (ctok);
-	if (ctok->type == COLON_TOKEN)
-	  compile_token_of_type (COLON_TOKEN);
-	else handle_semicolon (ctok);
-	break;
-
-      default:
-
-	if (NULL == push_token_list ())
-	  break;
-
-	expression (ctok);
-	compile_token_list ();
-
-	if (ctok->type == COLON_TOKEN)
-	  compile_token_of_type (COLON_TOKEN);
-	else handle_semicolon (ctok);
-	break;
-     }
-
-   LLT->parse_level -= 1;
-}
-
-static void block (_SLang_Token_Type *ctok)
-{
-   compile_token_of_type (OBRACE_TOKEN);
-   statement (ctok);
-   compile_token_of_type (CBRACE_TOKEN);
-}
-
-/*
- * statement-list:
- *	 statement
- *	 statement-list statement
- */
-static void statement_list (_SLang_Token_Type *ctok)
-{
-   while ((SLang_Error == 0)
-	  && (ctok->type != CBRACE_TOKEN)
-	  && (ctok->type != EOF_TOKEN))
-     {
-	statement(ctok);
-	get_token (ctok);
-     }
-}
-
-/* compound-statement:
- *	 { statement-list }
- */
-static void compound_statement (_SLang_Token_Type *ctok)
-{
-   /* ctok->type is OBRACE_TOKEN here */
-   get_token (ctok);
-   statement_list(ctok);
-   if (CBRACE_TOKEN != ctok->type)
-     {
-	_SLparse_error ("Expecting '}'", ctok, 0);
-	return;
-     }
-}
-
-/* This function is only called from statement. */
-static void expression_with_parenthesis (_SLang_Token_Type *ctok)
-{
-   if (ctok->type != OPAREN_TOKEN)
-     {
-	_SLparse_error("Expecting (", ctok, 0);
-	return;
-     }
-
-   if (NULL == push_token_list ())
-     return;
-
-   get_token (ctok);
-   expression (ctok);
-
-   if (ctok->type != CPAREN_TOKEN)
-     _SLparse_error("Expecting )", ctok, 0);
-
-   compile_token_list ();
-
-   get_token (ctok);
-}
-
-static void handle_semicolon (_SLang_Token_Type *ctok)
-{
-   if ((ctok->type == SEMICOLON_TOKEN)
-       || (ctok->type == EOF_TOKEN))
-     return;
-
-   _SLparse_error ("Expecting ;", ctok, 0);
-}
-
-void _SLparse_start (SLang_Load_Type *llt)
-{
-   _SLang_Token_Type ctok;
-   SLang_Load_Type *save_llt;
-   unsigned int save_use_next_token;
-   _SLang_Token_Type save_next_token;
-   Token_List_Type *save_list;
-#if _SLANG_HAS_DEBUG_CODE
-   int save_last_line_number = Last_Line_Number;
-
-   Last_Line_Number = -1;
-#endif
-   save_use_next_token = Use_Next_Token;
-   save_next_token = Next_Token;
-   save_list = Token_List;
-   save_llt = LLT;
-   LLT = llt;
-
-   init_token (&Next_Token);
-   Use_Next_Token = 0;
-   init_token (&ctok);
-   get_token (&ctok);
-
-   llt->parse_level = 0;
-   statement_list (&ctok);
-
-   if ((SLang_Error == 0)
-       && (ctok.type != EOF_TOKEN))
-     _SLparse_error ("Parse ended prematurely", &ctok, 0);
-   
-
-   if (SLang_Error)
-     {
-	if (SLang_Error < 0)	       /* severe error */
-	  save_list = NULL;
-
-	while (Token_List != save_list)
-	  {
-	     if (-1 == pop_token_list (1))
-	       break;		       /* ??? when would this happen? */
-	  }
-     }
-
-   free_token (&ctok);
-   LLT = save_llt;
-   if (Use_Next_Token)
-     free_token (&Next_Token);
-   Use_Next_Token = save_use_next_token;
-   Next_Token = save_next_token;
-#if _SLANG_HAS_DEBUG_CODE
-   Last_Line_Number = save_last_line_number;
-#endif
-}
-
-/* variable-list:
- * 	variable-decl
- * 	variable-decl variable-list
- *
- * variable-decl:
- * 	identifier
- * 	identifier = simple-expression
- */
-static void variable_list (_SLang_Token_Type *name_token, unsigned char variable_type)
-{
-   int declaring;
-   _SLang_Token_Type tok;
-
-   if (name_token->type != IDENT_TOKEN)
-     {
-	_SLparse_error ("Expecting a variable name", name_token, 0);
-	return;
-     }
-
-   declaring = 0;
-   do
-     {
-	if (declaring == 0)
-	  {
-	     declaring = 1;
-	     compile_token_of_type (variable_type);
-	  }
-
-	compile_token (name_token);
-
-	init_token (&tok);
-	if (ASSIGN_TOKEN == get_token (&tok))
-	  {
-	     compile_token_of_type (CBRACKET_TOKEN);
-	     declaring = 0;
-
-	     get_token (&tok);
-
-	     push_token_list ();
-	     simple_expression (&tok);
-	     compile_token_list ();
-
-	     name_token->type = _SCALAR_ASSIGN_TOKEN;
-	     compile_token (name_token);
-	  }
-
-	free_token (name_token);
-	*name_token = tok;
-     }
-   while ((name_token->type == COMMA_TOKEN)
-	  && (IDENT_TOKEN == get_token (name_token)));
-
-   if (declaring) compile_token_of_type (CBRACKET_TOKEN);
-}
-
-/* struct-declaration:
- * 	struct { struct-field-list };
- *
- * struct-field-list:
- * 	struct-field-name , struct-field-list
- * 	struct-field-name
- *
- * Generates code: "field-name-1" ... "field-name-N" N STRUCT_TOKEN
- */
-static void struct_declaration (_SLang_Token_Type *ctok)
-{
-   int n;
-   _SLang_Token_Type num_tok;
-
-   if (ctok->type != OBRACE_TOKEN)
-     {
-	_SLparse_error ("Expecting {", ctok, 0);
-	return;
-     }
-
-   n = 0;
-   while (IDENT_TOKEN == get_token (ctok))
-     {
-	n++;
-	ctok->type = STRING_TOKEN;
-	append_token (ctok);
-	if (COMMA_TOKEN != get_token (ctok))
-	  break;
-     }
-
-   if (ctok->type != CBRACE_TOKEN)
-     {
-	_SLparse_error ("Expecting }", ctok, 0);
-	return;
-     }
-   if (n == 0)
-     {
-	_SLparse_error ("struct requires at least 1 field", ctok, 0);
-	return;
-     }
-
-   init_token (&num_tok);
-   num_tok.type = INT_TOKEN;
-   num_tok.v.long_val = n;
-   append_token (&num_tok);
-   append_token_of_type (STRUCT_TOKEN);
-
-   get_token (ctok);
-}
-
-/* struct-declaration:
- * 	typedef struct { struct-field-list } Type_Name;
- *
- * struct-field-list:
- * 	struct-field-name , struct-field-list
- * 	struct-field-name
- *
- * Generates code: "field-name-1" ... "field-name-N" N STRUCT_TOKEN typedef
- */
-static void typedef_definition (_SLang_Token_Type *t)
-{
-
-   if (t->type != STRUCT_TOKEN)
-     {
-	_SLparse_error ("Expecting `struct'", t, 0);
-	return;
-     }
-   get_token (t);
-
-   struct_declaration (t);
-   if (t->type != IDENT_TOKEN)
-     {
-	_SLparse_error ("Expecting identifier", t, 0);
-	return;
-     }
-
-   t->type = STRING_TOKEN;
-   append_token (t);
-   append_token_of_type (TYPEDEF_TOKEN);
-
-   get_token (t);
-}
-
-/* function-args:
- * 	( args-dec-opt )
- *
- * args-decl-opt:
- * 	identifier
- * 	args-decl , identifier
- */
-static void define_function_args (_SLang_Token_Type *ctok)
-{
-   if (CPAREN_TOKEN == get_token (ctok))
-     {
-	get_token (ctok);
-	return;
-     }
-
-   compile_token_of_type(OBRACKET_TOKEN);
-
-   while ((SLang_Error == 0)
-	  && (ctok->type == IDENT_TOKEN))
-     {
-	compile_token (ctok);
-	if (COMMA_TOKEN != get_token (ctok))
-	  break;
-
-	get_token (ctok);
-     }
-
-   if (CPAREN_TOKEN != ctok->type)
-     {
-	_SLparse_error("Expecting )", ctok, 0);
-	return;
-     }
-   compile_token_of_type(CBRACKET_TOKEN);
-
-   get_token (ctok);
-}
-
-void try_multiple_assignment (_SLang_Token_Type *ctok)
-{
-   /* This is called with ctok->type == OPAREN_TOKEN.  We have no idea
-    * what follows this.  There are various possibilities such as:
-    * @  () = x;
-    * @  ( expression ) = x;
-    * @  ( expression ) ;
-    * @  ( expression ) OP expression;
-    * @  ( expression ) [expression] = expression;
-    * and only the first two constitute a multiple assignment.  The last
-    * two forms create the difficulty.
-    *
-    * Here is the plan.  First parse (expression) and then check next token.
-    * If it is an equal operator, then it will be parsed as a multiple
-    * assignment.  In fact, that is the easy part.
-    *
-    * The hard part stems from the fact that by parsing (expression), we
-    * have effectly truncated the parse if (expression) is part of a binary
-    * or unary expression.  Somehow, the parsing must be resumed.  The trick
-    * here is to use a dummy literal that generates no code: NO_OP_LITERAL
-    * Using it, we just call 'expression' and proceed.
-    */
-
-   if (NULL == push_token_list ())
-     return;
-
-   get_token (ctok);
-
-   if (ctok->type != CPAREN_TOKEN)
-     {
-	expression_with_commas (ctok, 1);
-	if (ctok->type != CPAREN_TOKEN)
-	  {
-	     _SLparse_error ("Expecting )", ctok, 0);
-	     return;
-	  }
-     }
-
-   switch (get_token (ctok))
-     {
-      case ASSIGN_TOKEN:
-      case PLUSEQS_TOKEN:
-      case MINUSEQS_TOKEN:
-      case TIMESEQS_TOKEN:
-      case DIVEQS_TOKEN:
-      case BOREQS_TOKEN:
-      case BANDEQS_TOKEN:
-	do_multiple_assignment (ctok);
-	pop_token_list (1);
-	break;
-
-      default:
-	unget_token (ctok);
-	ctok->type = NO_OP_LITERAL;
-	expression (ctok);
-	compile_token_list ();
-	break;
-     }
-}
-
-/* Note:  expression never gets compiled directly.  Rather, it gets
- *        appended to the token list and then compiled by a calling
- *        routine.
- */
-
-/* expression:
- *	 simple_expression
- *	 simple-expression , expression
- *       <none>
- */
-static void expression_with_commas (_SLang_Token_Type *ctok, int save_comma)
-{
-   while (SLang_Error == 0)
-     {
-	if (ctok->type != COMMA_TOKEN)
-	  {
-	     if (ctok->type == CPAREN_TOKEN)
-	       return;
-
-	     simple_expression (ctok);
-
-	     if (ctok->type != COMMA_TOKEN)
-	       break;
-	  }
-	if (save_comma) append_token (ctok);
-	get_token (ctok);
-     }
-}
-
-static void expression (_SLang_Token_Type *ctok)
-{
-   expression_with_commas (ctok, 0);
-}
-
-/* priority levels of binary operations */
-static unsigned char Binop_Level[] =
-{
-/* ADD_TOKEN */		2,
-/* SUB_TOKEN */		2,
-/* MUL_TOKEN */		1,
-/* DIV_TOKEN */		1,
-/* LT_TOKEN */		4,
-/* LE_TOKEN */		4,
-/* GT_TOKEN */		4,
-/* GE_TOKEN */		4,
-/* EQ_TOKEN */		5,
-/* NE_TOKEN */		5,
-/* AND_TOKEN */		9,
-/* OR_TOKEN */		10,
-/* MOD_TOKEN */		1,
-/* BAND_TOKEN */	6,
-/* SHL_TOKEN */		3,
-/* SHR_TOKEN */		3,
-/* BXOR_TOKEN */	7,
-/* BOR_TOKEN */		8,
-/* POUND_TOKEN */	1  /* Matrix Multiplication */
-};
-
-/* % Note: simple-expression groups operators OP1 at same level.  The
- * % actual implementation will not do this.
- * simple-expression:
- *	 unary-expression
- *	 binary-expression BINARY-OP unary-expression
- *       andelse xxelse-expression-list
- *       orelse xxelse-expression-list
- *
- * xxelse-expression-list:
- * 	{ expression }
- * 	xxelse-expression-list { expression }
- * binary-expression:
- *      unary-expression
- *      unary-expression BINARY-OP binary-expression
- */
-static void simple_expression (_SLang_Token_Type *ctok)
-{
-   unsigned char type;
-   unsigned char op_stack [64];
-   unsigned char level_stack [64];
-   unsigned char level;
-   unsigned int op_num;
-
-   switch (ctok->type)
-     {
-      case ANDELSE_TOKEN:
-      case ORELSE_TOKEN:
-	type = ctok->type;
-	if (OBRACE_TOKEN != get_token (ctok))
-	  {
-	     _SLparse_error ("Expecting '{'", ctok, 0);
-	     return;
-	  }
-
-	while (ctok->type == OBRACE_TOKEN)
-	  {
-	     append_token (ctok);
-	     get_token (ctok);
-	     expression (ctok);
-	     if (CBRACE_TOKEN != ctok->type)
-	       {
-		  _SLparse_error("Expecting }", ctok, 0);
-		  return;
-	       }
-	     append_token (ctok);
-	     get_token (ctok);
-	  }
-	append_token_of_type (type);
-	return;
-
-	/* avoid unary-expression if possible */
-      case STRING_TOKEN:
-	append_token (ctok);
-	get_token (ctok);
-	break;
-
-      default:
-	unary_expression (ctok);
-	break;
-     }
-
-   if (SEMICOLON_TOKEN == (type = ctok->type))
-     return;
-
-   op_num = 0;
-
-   while ((SLang_Error == 0)
-	  && (IS_BINARY_OP(type)))
-     {
-	level = Binop_Level[type - FIRST_BINARY_OP];
-
-	while ((op_num > 0) && (level_stack [op_num - 1] <= level))
-	  append_token_of_type (op_stack [--op_num]);
-
-	if (op_num >= sizeof (op_stack) - 1)
-	  {
-	     _SLparse_error ("Binary op stack overflow", ctok, 0);
-	     return;
-	  }
-
-	op_stack [op_num] = type;
-	level_stack [op_num] = level;
-	op_num++;
-
-	get_token (ctok);
-	unary_expression (ctok);
-	type = ctok->type;
-     }
-
-   while (op_num > 0)
-     append_token_of_type(op_stack[--op_num]);
-}
-
-/* unary-expression:
- *	 postfix-expression
- *	 ++ postfix-expression
- *	 -- postfix-expression
- *	 case unary-expression
- *	 OP3 unary-expression
- *	 (OP3: + - ~ & not @)
- *
- * Note:  This grammar permits: case case case WHATEVER
- */
-static void unary_expression (_SLang_Token_Type *ctok)
-{
-   unsigned char save_unary_ops [16];
-   unsigned int num_unary_ops;
-   unsigned char type;
-   _SLang_Token_Type *last_token;
-
-   num_unary_ops = 0;
-   while (SLang_Error == 0)
-     {
-	type = ctok->type;
-
-	switch (type)
-	  {
-	   case PLUSPLUS_TOKEN:
-	   case MINUSMINUS_TOKEN:
-	     get_token (ctok);
-	     postfix_expression (ctok);
-	     check_for_lvalue (type, NULL);
-	     goto out_of_switch;
-
-	   case ADD_TOKEN:
-	     get_token (ctok);	       /* skip it-- it's unary here */
-	     break;
-
-	   case SUB_TOKEN:
-	     (void) get_token (ctok);
-	     if (IS_INTEGER_TOKEN (ctok->type))
-	       {
-		  ctok->v.long_val = -ctok->v.long_val;
-		  break;
-	       }
-
-	     if (num_unary_ops == 16)
-	       goto stack_overflow_error;
-	     save_unary_ops [num_unary_ops++] = CHS_TOKEN;
-	     break;
-
-	   case DEREF_TOKEN:
-	   case BNOT_TOKEN:
-	   case NOT_TOKEN:
-	   case CASE_TOKEN:
-	     if (num_unary_ops == 16)
-	       goto stack_overflow_error;
-
-	     save_unary_ops [num_unary_ops++] = type;
-	     get_token (ctok);
-	     break;
-
-	     /* Try to avoid ->postfix_expression->primary_expression
-	      * subroutine calls.
-	      */
-	   case STRING_TOKEN:
-	     append_token (ctok);
-	     get_token (ctok);
-	     goto out_of_switch;
-
-	   default:
-	     postfix_expression (ctok);
-	     goto out_of_switch;
-	  }
-     }
-
-   out_of_switch:
-   if (num_unary_ops == 0)
-     return;
-
-   if ((DEREF_TOKEN == save_unary_ops[num_unary_ops - 1])
-       && (NULL != (last_token = get_last_token ()))
-       && (IS_ASSIGN_TOKEN(last_token->type)))
-     {
-	/* FIXME: Priority=medium
-	 * This needs generalized so that things like @a.y = 1 will work properly.
-	 */
-	if ((num_unary_ops != 1)
-	    || (last_token->type != _SCALAR_ASSIGN_TOKEN))
-	  {
-	     SLang_verror (SL_NOT_IMPLEMENTED, 
-			   "Only derefence assignments to simple variables are possible");
-	     return;
-	  }
-
-	last_token->type += (_DEREF_ASSIGN_TOKEN - _SCALAR_ASSIGN_TOKEN);
-	return;
-     }
-
-   while (num_unary_ops)
-     {
-	num_unary_ops--;
-	append_token_of_type (save_unary_ops [num_unary_ops]);
-     }
-   return;
-
-   stack_overflow_error:
-   _SLparse_error ("Too many unary operators.", ctok, 0);
-}
-
-static int combine_namespace_tokens (_SLang_Token_Type *a, _SLang_Token_Type *b)
-{
-   char *sa, *sb, *sc;
-   unsigned int lena, lenb;
-   unsigned long hash;
-
-   /* This is somewhat of a hack.  Combine the TWO identifier names
-    * (NAMESPACE) and (name) into the form NAMESPACE->name.  Then when the
-    * byte compiler compiles the object it will not be found.  It will then
-    * check for this hack and make the appropriate namespace lookup.
-    */
-
-   sa = a->v.s_val;
-   sb = b->v.s_val;
-
-   lena = strlen (sa);
-   lenb = strlen (sb);
-
-   sc = SLmalloc (lena + lenb + 3);
-   if (sc == NULL)
-     return -1;
-
-   strcpy (sc, sa);
-   strcpy (sc + lena, "->");
-   strcpy (sc + lena + 2, sb);
-
-   sb = _SLstring_make_hashed_string (sc, lena + lenb + 2, &hash);
-   SLfree (sc);
-   if (sb == NULL)
-     return -1;
-
-   /* I can free this string because no other token should be referencing it.
-    * (num_refs == 1).
-    */
-   _SLfree_hashed_string (sa, lena, a->hash);
-   a->v.s_val = sb;
-   a->hash = hash;
-
-   return 0;
-}
-
-static void append_identifier_token (_SLang_Token_Type *ctok)
-{
-   _SLang_Token_Type *last_token;
-
-   append_token (ctok);
-
-   if (NAMESPACE_TOKEN != get_token (ctok))
-     return;
-
-   if (IDENT_TOKEN != get_token (ctok))
-     {
-	_SLparse_error ("Expecting name-space identifier", ctok, 0);
-	return;
-     }
-
-   last_token = get_last_token ();
-   if (-1 == combine_namespace_tokens (last_token, ctok))
-     return;
-
-   (void) get_token (ctok);
-}
-
-static int get_identifier_expr_token (_SLang_Token_Type *ctok)
-{
-   _SLang_Token_Type next_token;
-
-   if (IDENT_TOKEN != get_identifier_token (ctok))
-     return -1;
-
-   init_token (&next_token);
-   if (NAMESPACE_TOKEN != get_token (&next_token))
-     {
-	unget_token (&next_token);
-	return IDENT_TOKEN;
-     }
-
-   if (IDENT_TOKEN != get_identifier_token (&next_token))
-     {
-	free_token (&next_token);
-	return -1;
-     }
-
-   if (-1 == combine_namespace_tokens (ctok, &next_token))
-     {
-	free_token (&next_token);
-	return -1;
-     }
-   free_token (&next_token);
-   return IDENT_TOKEN;
-}
-
-/* postfix-expression:
- *	 primary-expression
- *	 postfix-expression [ expression ]
- *	 postfix-expression ( function-args-expression )
- *	 postfix-expression . identifier
- *       postfix-expression ^ unary-expression
- *	 postfix-expression ++
- *	 postfix-expression --
- *	 postfix-expression = simple-expression
- *	 postfix-expression += simple-expression
- *	 postfix-expression -= simple-expression
- *
- * primary-expression:
- *	literal
- *	identifier-expr
- *	( expression_opt )
- * 	[ inline-array-expression ]
- * 	&identifier-expr
- *      struct-definition
- *      __tmp(identifier-expr)
- *
- * identifier-expr:
- *      identifier
- *      identifier->identifier
- */
-static void postfix_expression (_SLang_Token_Type *ctok)
-{
-   unsigned int start_pos, end_pos;
-   unsigned char type;
-
-   if (Token_List == NULL)
-     return;
-
-   start_pos = Token_List->len;
-
-   switch (ctok->type)
-     {
-      case IDENT_TOKEN:
-	append_identifier_token (ctok);
-	break;
-
-      case CHAR_TOKEN:
-      case SHORT_TOKEN:
-      case INT_TOKEN:
-      case LONG_TOKEN:
-      case UCHAR_TOKEN:
-      case USHORT_TOKEN:
-      case UINT_TOKEN:
-      case ULONG_TOKEN:
-      case STRING_TOKEN:
-      case BSTRING_TOKEN:
-#ifdef SLANG_HAS_FLOAT
-      case DOUBLE_TOKEN:
-      case FLOAT_TOKEN:
-#endif
-#ifdef SLANG_HAS_COMPLEX
-      case COMPLEX_TOKEN:
-#endif
-	append_token (ctok);
-	get_token (ctok);
-	break;
-
-      case OPAREN_TOKEN:
-	if (CPAREN_TOKEN != get_token (ctok))
-	  {
-	     expression (ctok);
-	     if (ctok->type != CPAREN_TOKEN)
-	       _SLparse_error("Expecting )", ctok, 0);
-	  }
-	get_token (ctok);
-	break;
-
-      case BAND_TOKEN:
-	if (IDENT_TOKEN != get_identifier_expr_token (ctok))
-	  break;
-
-	ctok->type = _REF_TOKEN;
-	append_token (ctok);
-	get_token (ctok);
-	break;
-
-      case OBRACKET_TOKEN:
-	get_token (ctok);
-	inline_array_expression (ctok);
-	break;
-
-      case NO_OP_LITERAL:
-	/* This token was introduced by try_multiple_assignment.  There,
-	 * a new token_list was pushed and (expression) was evaluated.
-	 * NO_OP_LITERAL represents the result of expression.  However,
-	 * we need to tweak the start_pos variable to point to the beginning
-	 * of the token list to complete the equivalence.
-	 */
-	start_pos = 0;
-	get_token (ctok);
-	break;
-
-      case STRUCT_TOKEN:
-	get_token (ctok);
-	struct_declaration (ctok);
-	break;
-
-      case TMP_TOKEN:
-	get_token (ctok);
-	if (ctok->type == OPAREN_TOKEN)
-	  {
-	     if (IDENT_TOKEN == get_identifier_expr_token (ctok))
-	       {
-		  ctok->type = TMP_TOKEN;
-		  append_token (ctok);
-		  get_token (ctok);
-		  if (ctok->type == CPAREN_TOKEN)
-		    {
-		       get_token (ctok);
-		       break;
-		    }
-	       }
-	  }
-	_SLparse_error ("Expecting form __tmp(NAME)", ctok, 0);
-	break;
-
-      default:
-	if (IS_INTERNAL_FUNC(ctok->type))
-	  {
-	     append_token (ctok);
-	     get_token (ctok);
-	  }
-	else
-	  _SLparse_error("Expecting a PRIMARY", ctok, 0);
-     }
-
-   while (SLang_Error == 0)
-     {
-	end_pos = Token_List->len;
-	type = ctok->type;
-	switch (type)
-	  {
-	   case OBRACKET_TOKEN:	       /* X[args] ==> [args] X ARRAY */
-	     get_token (ctok);
-	     append_token_of_type (ARG_TOKEN);
-	     if (ctok->type != CBRACKET_TOKEN) 
-	       array_index_expression (ctok);
-
-	     if (ctok->type != CBRACKET_TOKEN)
-	       {
-		  _SLparse_error ("Expecting ']'", ctok, 0);
-		  return;
-	       }
-	     get_token (ctok);
-	     /* append_token_of_type (EARG_TOKEN); -- ARRAY_TOKEN implicitely does this */
-	     token_list_element_exchange (start_pos, end_pos);
-	     append_token_of_type (ARRAY_TOKEN);
-	     break;
-
-	   case OPAREN_TOKEN:
-	     /* f(args) ==> args f */
-	     if (CPAREN_TOKEN != get_token (ctok))
-	       {
-		  function_args_expression (ctok, 1);
-		  token_list_element_exchange (start_pos, end_pos);
-	       }
-	     else get_token (ctok);
-	     break;
-
-	   case DOT_TOKEN:
-	     /* S.a ==> "a" S DOT
-	      * This means that if S is X[b], then X[b].a ==> a b X ARRAY DOT
-	      * and f(a).X[b].c ==> "c" b "X" a f . ARRAY .
-	      * Also, f(a).X[b] = g(x); ==> x g b "X" a f .
-	      */
-	     if (IDENT_TOKEN != get_identifier_token (ctok))
-	       return;
-
-	     ctok->type = DOT_TOKEN;
-	     append_token (ctok);
-	     get_token (ctok);
-	     break;
-
-	   case PLUSPLUS_TOKEN:
-	   case MINUSMINUS_TOKEN:
-	     check_for_lvalue (type, NULL);
-	     get_token (ctok);
-	     break;
-
-	   case ASSIGN_TOKEN:
-	   case PLUSEQS_TOKEN:
-	   case MINUSEQS_TOKEN:
-	   case TIMESEQS_TOKEN:
-	   case DIVEQS_TOKEN:
-	   case BOREQS_TOKEN:
-	   case BANDEQS_TOKEN:
-	     check_for_lvalue (type, NULL);
-	     get_token (ctok);
-	     simple_expression (ctok);
-	     token_list_element_exchange (start_pos, end_pos);
-	     break;
-
-	   case POW_TOKEN:
-	     get_token (ctok);
-	     unary_expression (ctok);
-	     append_token_of_type (POW_TOKEN);
-	     break;
-
-	   default:
-	     return;
-	  }
-     }
-}
-
-static void function_args_expression (_SLang_Token_Type *ctok, int handle_num_args)
-{
-   unsigned char last_type, this_type;
-
-   if (handle_num_args) append_token_of_type (ARG_TOKEN);
-
-   last_type = COMMA_TOKEN;
-
-   while (SLang_Error == 0)
-     {
-	this_type = ctok->type;
-
-	switch (this_type)
-	  {
-	   case COMMA_TOKEN:
-	     if (last_type == COMMA_TOKEN)
-	       append_token_of_type (_NULL_TOKEN);
-	     get_token (ctok);
-	     break;
-
-	   case CPAREN_TOKEN:
-	     if (last_type == COMMA_TOKEN)
-	       append_token_of_type (_NULL_TOKEN);
-	     if (handle_num_args) append_token_of_type (EARG_TOKEN);
-	     get_token (ctok);
-	     return;
-
-	   default:
-	     simple_expression (ctok);
-	     if ((ctok->type != COMMA_TOKEN)
-		 && (ctok->type != CPAREN_TOKEN))
-	       {
-		  _SLparse_error ("Expecting ')'", ctok, 0);
-		  break;
-	       }
-	  }
-	last_type = this_type;
-     }
-}
-
-static int check_for_lvalue (unsigned char eqs_type, _SLang_Token_Type *ctok)
-{
-   unsigned char type;
-
-   if ((ctok == NULL)
-       && (NULL == (ctok = get_last_token ())))
-     return -1;
-
-   type = ctok->type;
-
-   eqs_type -= ASSIGN_TOKEN;
-
-   if (type == IDENT_TOKEN)
-     eqs_type += _SCALAR_ASSIGN_TOKEN;
-   else if (type == ARRAY_TOKEN)
-     eqs_type += _ARRAY_ASSIGN_TOKEN;
-   else if (type == DOT_TOKEN)
-     eqs_type += _STRUCT_ASSIGN_TOKEN;
-   else
-     {
-	_SLparse_error ("Expecting LVALUE", ctok, 0);
-	return -1;
-     }
-
-   ctok->type = eqs_type;
-   return 0;
-}
-
-static void array_index_expression (_SLang_Token_Type *ctok)
-{
-   unsigned int num_commas;
-
-   num_commas = 0;
-   while (1)
-     {
-	switch (ctok->type)
-	  {
-	   case COLON_TOKEN:
-	     if (num_commas)
-	       _SLparse_error ("Misplaced ':'", ctok, 0);
-	     return;
-	     
-	   case TIMES_TOKEN:
-	     append_token_of_type (_INLINE_WILDCARD_ARRAY_TOKEN);
-	     get_token (ctok);
-	     break;
-	     
-	   case COMMA_TOKEN:
-	     _SLparse_error ("Misplaced ','", ctok, 0);
-	     return;
-	     
-	   default:
-	     simple_expression (ctok);
-	  }
-	
-	if (ctok->type != COMMA_TOKEN)
-	  return;
-	num_commas++;
-	get_token (ctok);
-     }
-}
-
-/* inline-array-expression:
- *    array_index_expression
- *    simple_expression : simple_expression
- *    simple_expression : simple_expression : simple_expression
- */
-static void inline_array_expression (_SLang_Token_Type *ctok)
-{
-   int num_colons = 0;
-
-   append_token_of_type (ARG_TOKEN);
-
-   if (ctok->type == COLON_TOKEN)	       /* [:...] */
-     append_token_of_type (_NULL_TOKEN);
-   else if (ctok->type != CBRACKET_TOKEN) 
-     array_index_expression (ctok);
-
-   if (ctok->type == COLON_TOKEN)
-     {
-	num_colons++;
-	if ((COLON_TOKEN == get_token (ctok))
-	    || (ctok->type == CBRACKET_TOKEN))
-	  append_token_of_type (_NULL_TOKEN);
-	else
-	  simple_expression (ctok);
-
-	if (ctok->type == COLON_TOKEN)
-	  {
-	     num_colons++;
-	     get_token (ctok);
-	     simple_expression (ctok);
-	  }
-     }
-
-   if (ctok->type != CBRACKET_TOKEN)
-     {
-	_SLparse_error ("Expecting ']'", ctok, 0);
-	return;
-     }
-
-   /* append_token_of_type (EARG_TOKEN); */
-   if (num_colons)
-     append_token_of_type (_INLINE_IMPLICIT_ARRAY_TOKEN);
-   else
-     append_token_of_type (_INLINE_ARRAY_TOKEN);
-   get_token (ctok);
-}
-
-static void do_multiple_assignment (_SLang_Token_Type *ctok)
-{
-   _SLang_Token_Type *s;
-   unsigned int i, k, len;
-   unsigned char assign_type;
-
-   assign_type = ctok->type;
-
-   /* The LHS token list has already been pushed.  Here we do the RHS
-    * so push to another token list, process it, then come back to
-    * LHS for assignment.
-    */
-   if (NULL == push_token_list ())
-     return;
-
-   get_token (ctok);
-   expression (ctok);
-   compile_token_list ();
-
-   if (SLang_Error)
-     return;
-
-   /* Finally compile the LHS of the assignment expression
-    * that has been saved.
-    */
-   s = Token_List->stack;
-   len = Token_List->len;
-
-   if (len == 0)
-     {
-	compile_token_of_type (POP_TOKEN);
-	return;
-     }
-
-   while (len > 0)
-     {
-	/* List is of form:
-	 *    a , b, c d e, f , g , , , h ,
-	 * The missing expressions will be replaced by a POP
-	 * ,,a
-	 */
-
-	/* Start from back looking for a COMMA */
-	k = len - 1;
-	if (s[k].type == COMMA_TOKEN)
-	  {
-	     compile_token_of_type (POP_TOKEN);
-	     len = k;
-	     continue;
-	  }
-
-	if (-1 == check_for_lvalue (assign_type, s + k))
-	  return;
-
-	i = 0;
-	while (1)
-	  {
-	     if (s[k].type == COMMA_TOKEN)
-	       {
-		  i = k + 1;
-		  break;
-	       }
-
-	     if (k == 0)
-	       break;
-
-	     k--;
-	  }
-
-	while (i < len)
-	  {
-	     compile_token (s + i);
-	     i++;
-	  }
-
-	len = k;
-     }
-
-   if (s[0].type == COMMA_TOKEN)
-     compile_token_of_type (POP_TOKEN);
-}
-
diff --git a/mdk-stage1/slang/slpath.c b/mdk-stage1/slang/slpath.c
deleted file mode 100644
index 831bd34df..000000000
--- a/mdk-stage1/slang/slpath.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/* Pathname and filename functions */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#ifdef HAVE_IO_H
-# include <io.h>
-#endif
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <signal.h>
-#include <time.h>
-
-#include <errno.h>
-#include <string.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-/* In this file, all file names are assumed to be specified in the Unix
- * format, or in the native format.
- *
- * Aboout VMS:
- * VMS pathnames are a mess.  In general, they look like
- * node::device:[dir.dir]file.ext;version
- * and I do not know of a well-defined Unix representation for them.  So,
- * I am going to punt and encourage users to stick to the native
- * representation.
- */
-
-#if defined(IBMPC_SYSTEM)
-# define PATH_SEP		'\\'
-# define DRIVE_SPECIFIER	':'
-# define SEARCH_PATH_DELIMITER	';'
-# define THIS_DIR_STRING	"."
-#else
-# if defined(VMS)
-#  define PATH_SEP		']'
-#  define DRIVE_SPECIFIER	':'
-#  define SEARCH_PATH_DELIMITER	' '
-#  define THIS_DIR_STRING	"[]"   /* Is this correct?? */
-# else
-#  define PATH_SEP		'/'
-#  define UNIX_PATHNAMES_OK
-#  define SEARCH_PATH_DELIMITER	':'
-#  define THIS_DIR_STRING	"."
-# endif
-#endif
-
-#ifdef UNIX_PATHNAMES_OK
-# define IS_PATH_SEP(x) ((x) == PATH_SEP)
-#else
-# define IS_PATH_SEP(x)	(((x) == PATH_SEP) || ((x) == '/'))
-#endif
-
-/* If file is /a/b/c/basename, this function returns a pointer to basename */
-char *SLpath_basename (char *file)
-{
-   char *b;
-
-   if (file == NULL) return NULL;
-   b = file + strlen (file);
-
-   while (b != file)
-     {
-	b--;
-	if (IS_PATH_SEP(*b))
-	  return b + 1;
-#ifdef DRIVE_SPECIFIER
-	if (*b == DRIVE_SPECIFIER)
-	  return b + 1;
-#endif
-     }
-
-   return b;
-}
-
-/* Returns a malloced string */
-char *SLpath_pathname_sans_extname (char *file)
-{
-   char *b;
-
-   file = SLmake_string (file);
-   if (file == NULL)
-     return NULL;
-
-   b = file + strlen (file);
-
-   while (b != file)
-     {
-	b--;
-	if (*b == '.')
-	  {
-	     *b = 0;
-	     return file;
-	  }
-     }
-
-   return file;
-}
-
-/* If path looks like: A/B/C/D/whatever, it returns A/B/C/D as a malloced 
- * string.
- */
-char *SLpath_dirname (char *file)
-{
-   char *b;
-
-   if (file == NULL) return NULL;
-   b = file + strlen (file);
-
-   while (b != file)
-     {
-	b--;
-	if (IS_PATH_SEP(*b))
-	  {
-	     if (b == file) b++;
-	     break;
-	  }
-
-#ifdef DRIVE_SPECIFIER
-	if (*b == DRIVE_SPECIFIER)
-	  {
-	     b++;
-	     break;
-	  }
-#endif
-     }
-   
-   if (b == file)
-     return SLmake_string (THIS_DIR_STRING);
-   
-   return SLmake_nstring (file, (unsigned int) (b - file));
-}
-
-/* Note: VMS filenames also contain version numbers.  The caller will have
- * to deal with that.
- * 
- * The extension includes the '.'.  If no extension is present, "" is returned.
- */
-char *SLpath_extname (char *file)
-{
-   char *b;
-
-   if (NULL == (file = SLpath_basename (file)))
-     return NULL;
-
-   b = file + strlen (file);
-   while (b != file)
-     {
-	b--;
-	if (*b == '.')
-	  return b;
-     }
-   
-   if (*b == '.')
-     return b;
-
-   /* Do not return a literal "" */
-   return file + strlen (file);
-}
-
-#ifdef IBMPC_SYSTEM
-static void convert_slashes (char *f)
-{
-   while (*f)
-     {
-	if (*f == '/') *f = PATH_SEP;
-	f++;
-     }
-}
-#endif
-
-int SLpath_is_absolute_path (char *name)
-{
-#ifdef UNIX_PATHNAMES_OK
-   return (*name == '/');
-#else
-   if (IS_PATH_SEP (*name))
-     return 1;
-
-# ifdef DRIVE_SPECIFIER
-   /* Look for a drive specifier */
-   while (*name)
-     {
-	if (*name == DRIVE_SPECIFIER)
-	  return 1;
-
-	name++;
-     }
-# endif
-
-   return 0;
-#endif
-}
-
-/* This returns a MALLOCED string */
-char *SLpath_dircat (char *dir, char *name)
-{
-   unsigned int len, dirlen;
-   char *file;
-#ifndef VMS
-   int requires_fixup;
-#endif
-
-   if (name == NULL)
-     name = "";
-
-   if ((dir == NULL) || (SLpath_is_absolute_path (name)))
-     dir = "";
-
-   /* Both VMS and MSDOS have default directories associated with each drive.
-    * That is, the meaning of something like C:X depends upon more than just
-    * the syntax of the string.  Since this concept has more power under VMS
-    * it will be honored here.  However, I am going to treat C:X as C:\X
-    * under MSDOS.
-    *
-    * Note!!!
-    * VMS has problems of its own regarding path names, so I am simply
-    * going to strcat.  Hopefully the VMS RTL is smart enough to deal with
-    * the result.
-    */
-   dirlen = strlen (dir);
-#ifndef VMS
-   requires_fixup = (dirlen && (0 == IS_PATH_SEP(dir[dirlen - 1])));
-#endif
-
-   len = dirlen + strlen (name) + 2;
-   if (NULL == (file = SLmalloc (len)))
-     return NULL;
-
-   strcpy (file, dir);
-
-#ifndef VMS
-   if (requires_fixup)
-     file[dirlen++] = PATH_SEP;
-#endif
-
-   strcpy (file + dirlen, name);
-
-#if defined(IBMPC_SYSTEM)
-   convert_slashes (file);
-#endif
-
-   return file;
-}
-
-int SLpath_file_exists (char *file)
-{
-   struct stat st;
-   int m;
-
-#if defined(__os2__) && !defined(S_IFMT)
-/* IBM VA3 doesn't declare S_IFMT */
-# define	S_IFMT	(S_IFDIR | S_IFCHR | S_IFREG)
-#endif
-
-#ifdef _S_IFDIR
-# ifndef S_IFDIR
-#  define S_IFDIR _S_IFDIR
-# endif
-#endif
-
-#ifndef S_ISDIR
-# ifdef S_IFDIR
-#  define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
-# else
-#  define S_ISDIR(m) 0
-# endif
-#endif
-
-   if (file == NULL)
-     return -1;
-
-   if (stat(file, &st) < 0) return 0;
-   m = st.st_mode;
-
-   if (S_ISDIR(m)) return (2);
-   return 1;
-}
-
-char *SLpath_find_file_in_path (char *path, char *name)
-{
-   unsigned int max_path_len;
-   unsigned int this_path_len;
-   char *file, *dir;
-   char *p;
-   unsigned int nth;
-
-   if ((path == NULL) || (*path == 0)
-       || (name == NULL) || (*name == 0))
-     return NULL;
-
-   max_path_len = 0;
-   this_path_len = 0;
-   p = path;
-   while (*p != 0)
-     {
-	if (*p++ == SEARCH_PATH_DELIMITER)
-	  {
-	     if (this_path_len > max_path_len) max_path_len = this_path_len;
-	     this_path_len = 0;
-	  }
-	else this_path_len++;
-     }
-   if (this_path_len > max_path_len) max_path_len = this_path_len;
-   max_path_len++;
-
-   if (NULL == (dir = SLmalloc (max_path_len)))
-     return NULL;
-
-   nth = 0;
-   while (-1 != SLextract_list_element (path, nth, SEARCH_PATH_DELIMITER,
-					dir, max_path_len))
-     {
-	nth++;
-	if (*dir == 0)
-	  continue;
-
-	if (NULL == (file = SLpath_dircat (dir, name)))
-	  {
-	     SLfree (dir);
-	     return NULL;
-	  }
-
-	if (1 == SLpath_file_exists (file))
-	  {
-	     SLfree (dir);
-	     return file;
-	  }
-
-	SLfree (file);
-     }
-
-   SLfree (dir);
-   return NULL;
-}
-
diff --git a/mdk-stage1/slang/slposdir.c b/mdk-stage1/slang/slposdir.c
deleted file mode 100644
index 33799e574..000000000
--- a/mdk-stage1/slang/slposdir.c
+++ /dev/null
@@ -1,1057 +0,0 @@
-/* file intrinsics for S-Lang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#if defined(__unix__) || (defined (__os2__) && defined (__EMX__))
-# include <sys/types.h>
-#endif
-
-#ifdef HAVE_IO_H
-# include <io.h>		       /* for chmod */
-#endif
-
-#if defined(__BORLANDC__)
-# include <process.h>
-# include <dos.h>
-#endif
-
-#ifdef HAVE_FCNTL_H
-# include <fcntl.h>
-#endif
-#ifdef HAVE_SYS_FCNTL_H
-# include <sys/fcntl.h>
-#endif
-
-#ifdef __unix__
-# include <sys/file.h>
-#endif
-
-#if defined(__BORLANDC__)
-# include <dir.h>
-#endif
-
-#if defined(_MSC_VER)
-# include <io.h>
-#endif
-
-#if defined(__DECC) && defined(VMS)
-# include <unixio.h>
-# include <unixlib.h>
-#endif
-
-#ifdef VMS
-# include <stat.h>
-#else
-# include <sys/stat.h>
-#endif
-
-#if defined(VMS)
-# define USE_LISTDIR_INTRINSIC	0
-#else
-# define USE_LISTDIR_INTRINSIC	1
-#endif
-
-#if USE_LISTDIR_INTRINSIC
-
-#if defined(__WIN32__)
-# include <windows.h>
-#else
-# if defined(__OS2__) && defined(__IBMC__)
-#  define INCL_DOS
-#  define INCL_ERRORS
-#  include <os2.h>
-#  include <direct.h>
-#  include <ctype.h>
-# else
-#  ifdef HAVE_DIRENT_H
-#   include <dirent.h>
-#  else
-#   ifdef HAVE_DIRECT_H
-#    include <direct.h>
-#   else
-#    define dirent direct
-#    define NEED_D_NAMLEN
-#    if HAVE_SYS_NDIR_H
-#     include <sys/ndir.h>
-#    endif
-#    if HAVE_SYS_DIR_H
-#     include <sys/dir.h>
-#    endif
-#    if HAVE_NDIR_H
-#     include <ndir.h>
-#    endif
-#   endif
-#  endif
-# endif
-#endif
-
-#endif				       /* USE_LISTDIR_INTRINSIC */
-
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-static int push_stat_struct (struct stat *st, int opt_attrs)
-{
-   char *field_names [12];
-   unsigned char field_types[12];
-   VOID_STAR field_values [12];
-   int int_values [12];
-   unsigned int i;
-
-   field_names [0] = "st_dev"; int_values [0] = (int) st->st_dev;
-   field_names [1] = "st_ino"; int_values [1] = (int) st->st_ino;
-   field_names [2] = "st_mode"; int_values [2] = (int) st->st_mode;
-   field_names [3] = "st_nlink"; int_values [3] = (int) st->st_nlink;
-   field_names [4] = "st_uid"; int_values [4] = (int) st->st_uid;
-   field_names [5] = "st_gid"; int_values [5] = (int) st->st_gid;
-   field_names [6] = "st_rdev"; int_values [6] = (int) st->st_rdev;
-   field_names [7] = "st_size"; int_values [7] = (int) st->st_size;
-   field_names [8] = "st_atime"; int_values [8] = (int) st->st_atime;
-   field_names [9] = "st_mtime"; int_values [9] = (int) st->st_mtime;
-   field_names [10] = "st_ctime"; int_values [10] = (int) st->st_ctime;
-
-   field_names [11] = "st_opt_attrs"; int_values[11] = opt_attrs;
-
-   for (i = 0; i < 12; i++)
-     {
-	field_types [i] = SLANG_INT_TYPE;
-	field_values [i] = (VOID_STAR) (int_values + i);
-     }
-
-   return SLstruct_create_struct (12, field_names, field_types, field_values);
-}
-
-static void stat_cmd (char *file)
-{
-   struct stat st;
-   int status;
-   int opt_attrs;
-
-   status = stat (file, &st);
-
-#if defined(__MSDOS__) || defined(__WIN32__)
-   if (status == -1)
-     {
-	unsigned int len = strlen (file);
-	if (len && ((file[len-1] == '\\') || (file[len-1] == '/')))
-	  {
-	     file = SLmake_nstring (file, len-1);
-	     if (file == NULL)
-	       return;
-
-	     status = stat (file, &st);
-	     SLfree (file);
-	  }
-     }
-#endif
-   if (status == -1)
-     {
-	_SLerrno_errno = errno;
-	SLang_push_null ();
-	return;
-     }
-
-#ifdef __WIN32__
-   opt_attrs = GetFileAttributes (file);
-#else
-   opt_attrs = 0;
-#endif
-
-   push_stat_struct (&st, opt_attrs);
-}
-
-static void lstat_cmd (char *file)
-{
-#ifdef HAVE_LSTAT
-   struct stat st;
-   int opt_attrs;
-
-   if (-1 == lstat (file, &st))
-     {
-	_SLerrno_errno = errno;
-	SLang_push_null ();
-	return;
-     }
-
-#ifdef __WIN32__
-   opt_attrs = GetFileAttributes (file);
-#else
-   opt_attrs = 0;
-#endif
-   
-   push_stat_struct (&st, opt_attrs);
-#else
-   stat_cmd (file);
-#endif
-}
-
-/* Well, it appears that on some systems, these are not defined.  Here I
- * provide them.  These are derived from the Linux stat.h file.
- */
-
-#ifdef __os2__
-# ifdef __IBMC__
-/* IBM VA3 doesn't declare S_IFMT */
-#  define	S_IFMT	(S_IFDIR | S_IFCHR | S_IFREG)
-# endif
-#endif
-
-#ifndef S_ISLNK
-# ifdef S_IFLNK
-#   define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK)
-# else
-#   define S_ISLNK(m) 0
-# endif
-#endif
-
-#ifndef S_ISREG
-# ifdef S_IFREG
-#   define S_ISREG(m) (((m) & S_IFMT) == S_IFREG)
-# else
-#   define S_ISREG(m) 0
-# endif
-#endif
-
-#ifndef S_ISDIR
-# ifdef S_IFDIR
-#   define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
-# else
-#   define S_ISDIR(m) 0
-# endif
-#endif
-
-#ifndef S_ISCHR
-# ifdef S_IFCHR
-#   define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR)
-# else
-#   define S_ISCHR(m) 0
-# endif
-#endif
-
-#ifndef S_ISBLK
-# ifdef S_IFBLK
-#   define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK)
-# else
-#   define S_ISBLK(m) 0
-# endif
-#endif
-
-#ifndef S_ISFIFO
-# ifdef S_IFIFO
-#   define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO)
-# else
-#   define S_ISFIFO(m) 0
-# endif
-#endif
-
-#ifndef S_ISSOCK
-# ifdef S_IFSOCK
-#   define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK)
-# else
-#   define S_ISSOCK(m) 0
-# endif
-#endif
-
-static char stat_is_cmd (char *what, int *mode_ptr)
-{
-   int ret;
-   int st_mode = *mode_ptr;
-
-   if (!strcmp (what, "sock")) ret = S_ISSOCK(st_mode);
-   else if (!strcmp (what, "fifo")) ret = S_ISFIFO(st_mode);
-   else if (!strcmp (what, "blk")) ret = S_ISBLK(st_mode);
-   else if (!strcmp (what, "chr")) ret = S_ISCHR(st_mode);
-   else if (!strcmp (what, "dir")) ret = S_ISDIR(st_mode);
-   else if (!strcmp (what, "reg")) ret = S_ISREG(st_mode);
-   else if (!strcmp (what, "lnk")) ret = S_ISLNK(st_mode);
-   else
-     {
-	SLang_verror (SL_INVALID_PARM, "stat_is: Unrecognized type: %s", what);
-	return -1;
-     }
-
-   return (char) (ret != 0);
-}
-
-#ifdef HAVE_READLINK
-static void readlink_cmd (char *s)
-{
-   char buf[2048];
-   int n;
-
-   n = readlink (s, buf, sizeof (buf)-1);
-   if (n == -1)
-     {
-	_SLerrno_errno = errno;
-	s = NULL;
-     }
-   else
-     {
-	buf[n] = 0;
-	s = buf;
-     }
-
-   (void) SLang_push_string (s);
-}
-#endif
-
-static int chmod_cmd (char *file, int *mode)
-{
-   if (-1 == chmod(file, (mode_t) *mode))
-     {
-	_SLerrno_errno = errno;
-	return -1;
-     }
-   return 0;
-}
-
-#ifdef HAVE_CHOWN
-static int chown_cmd (char *file, int *owner, int *group)
-{
-   int ret;
-
-   if (-1 == (ret = chown(file, (uid_t) *owner, (gid_t) *group)))
-     _SLerrno_errno = errno;
-   return ret;
-}
-#endif
-
-/* add trailing slash to dir */
-static void fixup_dir (char *dir)
-{
-#ifndef VMS
-   int n;
-
-   if ((n = strlen(dir)) > 1)
-     {
-	n--;
-#if defined(IBMPC_SYSTEM)
-      if ( dir[n] != '/' && dir[n] != '\\' )
-      	strcat(dir, "\\" );
-#else
-      if (dir[n] != '/' )
-      	strcat(dir, "/" );
-#endif
-     }
-#endif /* !VMS */
-}
-
-static void slget_cwd (void)
-{
-   char cwd[1024];
-   char *p;
-
-#ifndef HAVE_GETCWD
-   p = getwd (cwd);
-#else
-# if defined (__EMX__)
-   p = _getcwd2(cwd, 1022);	       /* includes drive specifier */
-# else
-   p = getcwd(cwd, 1022);	       /* djggp includes drive specifier */
-# endif
-#endif
-
-   if (p == NULL)
-     {
-	_SLerrno_errno = errno;
-	SLang_push_null ();
-	return;
-     }
-
-#ifndef VMS
-#ifdef __GO32__
-   /* You never know about djgpp since it favors unix */
-     {
-	char ch;
-	p = cwd;
-	while ((ch = *p) != 0)
-	  {
-	     if (ch == '/') *p = '\\';
-	     p++;
-	  }
-     }
-#endif
-   fixup_dir (cwd);
-#endif
-   SLang_push_string (cwd);
-}
-
-static int chdir_cmd (char *s)
-{
-   int ret;
-
-   while (-1 == (ret = chdir (s)))
-     {
-#ifdef EINTR
-	if (errno == EINTR)
-	  continue;
-#endif
-	_SLerrno_errno = errno;
-	break;
-     }
-   return ret;
-}
-
-#ifdef VMS
-static int remove_cmd (char *);
-/* If the file looks like xxx, then change it to xxx.dir.  If
- * it looks like A:[B.xxx] then change it to A:[B]xxx.dir.
- */
-
-static char *vms_convert_dirspec_to_vms_dir (char *str)
-{
-   char *s;
-   char *version;
-   unsigned int len;
-   char *dot;
-
-   len = strlen (str);
-
-   version = strchr (str, ';');
-   if (version == NULL)
-     version = str + len;
-   /* version points to the version of the input string */
-
-   
-   if (NULL == (s = SLmalloc (len + 8)))/* allow extra space to work with */
-     return NULL;
-
-   len = (unsigned int) (version - str);
-   strncpy (s, str, len);
-   s[len] = 0;
-   str = s;
-   
-   /* Lowercase the whole thing */
-   while (*s != 0)
-     {
-	*s = LOWER_CASE(*s);
-	s++;
-     }
-
-   if ((s > str)
-       && (s[-1] != ']'))
-     {
-	if ((s >= str + 4)
-	    && (0 == strcmp (s - 4, ".dir")))
-	  s -= 4;
-	goto add_dir_version;
-     }
-
-   /* Check for one of two possibilities:
-    * 
-    *     dev:[x]   --> dev:x
-    *     dev:[a.x] --> dev:[a]x
-    */
-   
-   if (NULL == (dot = strchr (str, '.')))
-     {
-	/* First possibility */
-	if (NULL == (s = strchr (str, '[')))
-	  return str;		       /* let someone else figure this out */
-	while (s[1] != ']')
-	  {
-	     s[0] = s[1];
-	     s++;
-	  }
-	*s = 0;
-	goto add_dir_version;
-     }
-   
-   while (NULL != (s = strchr (dot + 1, '.')))
-     dot = s;
-   
-   *dot = ']';
-   s = str + (len - 1);
-   
-   /* Drop */
-
-   add_dir_version:
-   strcpy (s, ".dir");
-   strcpy (s+4, version);
-   return str;
-}
-#endif
-
-static int rmdir_cmd (char *s)
-{
-#ifdef VMS
-   int status;
-
-   if (NULL == (s = vms_convert_dirspec_to_vms_dir (s)))
-     return -1;
-   
-   status = remove_cmd (s);
-   SLfree (s);
-   
-   return status;
-
-#else
-   int ret;
-
-   while (-1 == (ret = rmdir (s)))
-     {
-#ifdef EINTR
-	if (errno == EINTR)
-	  continue;
-#endif
-	_SLerrno_errno = errno;
-	break;
-     }
-   return ret;
-#endif
-}
-
-static int remove_cmd (char *s)
-{
-   int ret;
-#ifdef VMS
-# define REMOVE delete
-#else
-# ifdef REAL_UNIX_SYSTEM
-#  define REMOVE unlink
-# else
-#  define REMOVE remove
-# endif
-#endif
-
-   while (-1 == (ret = REMOVE (s)))
-     {
-#ifdef EINTR
-	if (errno == EINTR)
-	  continue;
-#endif
-	_SLerrno_errno = errno;
-	break;
-     }
-   return ret;
-}
-
-static int rename_cmd (char *oldpath, char *newpath)
-{
-   int ret;
-   while (-1 == (ret = rename (oldpath, newpath)))
-     {
-#ifdef EINTR
-	if (errno == EINTR)
-	  continue;
-#endif
-	_SLerrno_errno = errno;
-	break;
-     }
-   return ret;
-}
-
-static int mkdir_cmd (char *s, int *mode_ptr)
-{
-   int ret;
-
-   (void) mode_ptr;
-   errno = 0;
-
-#if defined (__MSDOS__) && !defined(__GO32__)
-# define MKDIR(x,y) mkdir(x)
-#else
-# if defined (__os2__) && !defined (__EMX__)
-#  define MKDIR(x,y) mkdir(x)
-# else
-#  if defined (__WIN32__) && !defined (__CYGWIN32__)
-#   define MKDIR(x,y) mkdir(x)
-#  else
-#   define MKDIR mkdir
-#  endif
-# endif
-#endif
-
-   while (-1 == (ret = MKDIR(s, *mode_ptr)))
-     {
-#ifdef EINTR
-	if (errno == EINTR)
-	  continue;
-#endif
-	_SLerrno_errno = errno;
-	break;
-     }
-   return ret;
-}
-
-#ifdef HAVE_MKFIFO
-static int mkfifo_cmd (char *path, int *mode)
-{
-   if (-1 == mkfifo (path, *mode))
-     {
-	_SLerrno_errno = errno;
-	return -1;
-     }
-   return 0;
-}
-#endif
-
-#if USE_LISTDIR_INTRINSIC
-
-static void free_dir_list (char **list, unsigned int num)
-{
-   unsigned int i;
-
-   if (list == NULL)
-     return;
-
-   for (i = 0; i < num; i++)
-     SLang_free_slstring (list[i]);
-   SLfree ((char *) list);
-}
-
-#if defined(__WIN32__) || defined(__os2__) && defined(__IBMC__)
-static int build_dirlist (char *file, char *opt, char ***listp, unsigned int *nump, unsigned int *maxnum)
-{
-# ifdef __WIN32__
-   DWORD status;
-   HANDLE h;
-   WIN32_FIND_DATA fd;
-# else
-   APIRET rc;
-   FILESTATUS3 status;
-   HDIR h;
-   FILEFINDBUF3 fd;
-   ULONG cFileNames;
-# endif
-   char *pat;
-   unsigned int len;
-   char **list;
-   unsigned int num;
-   unsigned int max_num;
-   int hok;
-
-   /* If an option is present, assume ok to list hidden files.  Later
-    * I will formalize this.
-    */
-   hok = (opt != NULL);
-
-# ifdef __WIN32__
-   status = GetFileAttributes (file);
-# else
-   rc = DosQueryPathInfo(file, FIL_STANDARD, &status, sizeof(FILESTATUS3));
-# endif
-
-
-# ifdef __WIN32__
-   if (status == (DWORD)-1)
-     {
-	_SLerrno_errno = ENOENT;
-	return -1;
-     }
-   if (0 == (status & FILE_ATTRIBUTE_DIRECTORY))
-     {
-	_SLerrno_errno = ENOTDIR;
-	return -1;
-     }
-# else
-   if ((rc != 0) || (status.attrFile & FILE_DIRECTORY) == 0)
-     {
-	/* ENOTDIR isn't defined in VA3. */
-	_SLerrno_errno = ENOENT;
-	return -1;
-     }
-# endif
-
-   len = strlen (file);
-   pat = SLmalloc (len + 3);
-   if (pat == NULL)
-     return -1;
-
-   strcpy (pat, file);
-   file = pat;
-   while (*file != 0)
-     {
-	if (*file == '/') *file = '\\';
-	file++;
-     }
-
-   if (len && (pat[len-1] != '\\'))
-     {
-	pat[len] = '\\';
-	len++;
-     }
-   pat[len++] = '*';
-   pat[len] = 0;
-
-   num = 0;
-   max_num = 50;
-   list = (char **)SLmalloc (max_num * sizeof(char *));
-   if (list == NULL)
-     {
-	SLfree (pat);
-	return -1;
-     }
-
-# ifdef __WIN32__
-   h = FindFirstFile(pat, &fd);
-   if (h == INVALID_HANDLE_VALUE)
-     {
-	if (ERROR_NO_MORE_FILES != GetLastError())
-	  {
-	     SLfree (pat);
-	     SLfree ((char *)list);
-	     return -1;
-	  }
-     }
-# else
-   h = HDIR_CREATE;
-   cFileNames = 1;
-   rc = DosFindFirst(pat, &h, FILE_READONLY | FILE_DIRECTORY |
-		     FILE_ARCHIVED, &fd, sizeof(fd), &cFileNames, FIL_STANDARD);
-   if (rc != 0)
-     {
-	if (rc != ERROR_NO_MORE_FILES)
-	  {
-	     SLfree (pat);
-	     SLfree ((char *)list);
-	     return -1;
-	  }
-     }
-# endif   
-   else while (1)
-     {
-	/* Do not include hidden files in the list.  Also, do not
-	 * include "." and ".." entries.
-	 */
-#ifdef __WIN32__
-	file = fd.cFileName;
-#else
-	file = fd.achName;
-#endif
-	if (
-#ifdef __WIN32__
-	    (hok || (0 == (fd.dwFileAttributes & FILE_ATTRIBUTE_HIDDEN)))
-#else
-	    (hok || (0 == (fd.attrFile & FILE_HIDDEN)))
-#endif
-	    && ((*file != '.')
-		|| ((0 != strcmp (file, "."))
-		    && (0 != strcmp (file, "..")))))
-	  {
-	     if (num == max_num)
-	       {
-		  char **new_list;
-
-		  max_num += 100;
-		  new_list = (char **)SLrealloc ((char *)list, max_num * sizeof (char *));
-		  if (new_list == NULL)
-		    goto return_error;
-
-		  list = new_list;
-	       }
-
-	     file = SLang_create_slstring (file);
-	     if (file == NULL)
-	       goto return_error;
-
-	     list[num] = file;
-	     num++;
-	  }
-
-#ifdef __WIN32__
-	if (FALSE == FindNextFile(h, &fd))
-	  {
-	     if (ERROR_NO_MORE_FILES == GetLastError())
-	       {
-		  FindClose (h);
-		  break;
-	       }
-
-	     _SLerrno_errno = errno;
-	     FindClose (h);
-	     goto return_error;
-	  }
-#else
-        cFileNames = 1;
-        rc = DosFindNext(h, &fd, sizeof(fd), &cFileNames);
-        if (rc != 0)
-	  {
-	     if (rc == ERROR_NO_MORE_FILES)
-	       {
-		  DosFindClose (h);
-		  break;
-	       }
-
-	     _SLerrno_errno = errno;
-	     DosFindClose (h);
-	     goto return_error;
-	  }
-#endif
-     }
-
-   SLfree (pat);
-   *maxnum = max_num;
-   *nump = num;
-   *listp = list;
-   return 0;
-
-   return_error:
-   free_dir_list (list, num);
-   SLfree (pat);
-   return -1;
-}
-
-#else				       /* NOT __WIN32__ */
-
-static int build_dirlist (char *dir, char *opt, char ***listp, unsigned int *nump, unsigned int *maxnum)
-{
-   DIR *dp;
-   struct dirent *ep;
-   unsigned int num_files;
-   unsigned int max_num_files;
-   char **list;
-
-   (void) opt;
-
-   if (NULL == (dp = opendir (dir)))
-     {
-	_SLerrno_errno = errno;
-	return -1;
-     }
-
-   num_files = max_num_files = 0;
-   list = NULL;
-   while (NULL != (ep = readdir (dp)))
-     {
-	unsigned int len;
-	char *name;
-
-	name = ep->d_name;
-#  ifdef NEED_D_NAMLEN
-	len = ep->d_namlen;
-#  else
-	len = strlen (name);
-#  endif
-	if ((*name == '.') && (len <= 2))
-	  {
-	     if (len == 1) continue;
-	     if (name [1] == '.') continue;
-	  }
-
-	if (num_files == max_num_files)
-	  {
-	     char **new_list;
-
-	     max_num_files += 100;
-	     if (NULL == (new_list = (char **) SLrealloc ((char *)list, max_num_files * sizeof(char *))))
-	       goto return_error;
-
-	     list = new_list;
-	  }
-
-	if (NULL == (list[num_files] = SLang_create_nslstring (name, len)))
-	  goto return_error;
-
-	num_files++;
-     }
-
-   closedir (dp);
-   *nump = num_files;
-   *maxnum = max_num_files;
-   *listp = list;
-   return 0;
-
-   return_error:
-   if (dp != NULL)
-     closedir (dp);
-   free_dir_list (list, num_files);
-   return -1;
-}
-# endif				       /* NOT __WIN32__ */
-
-static void listdir_cmd (char *dir, char *opt)
-{
-   SLang_Array_Type *at;
-   unsigned int num_files;
-   unsigned int max_num_files;
-   int inum_files;
-   char **list;
-
-   if (-1 == build_dirlist (dir, opt, &list, &num_files, &max_num_files))
-     {
-	SLang_push_null ();
-	return;
-     }
-   /* If max_num_files == 0, then num_files == 0 and list == NULL.  
-    * The realloc step below will malloc list for us.
-    */
-   if (num_files + 1 < max_num_files)
-     {
-	char **new_list;
-	if (NULL == (new_list = (char **) SLrealloc ((char *)list, (num_files + 1)* sizeof(char*))))
-	  {
-	     free_dir_list (list, num_files);
-	     SLang_push_null ();
-	     return;
-	  }
-	list = new_list;
-     }
-
-   inum_files = (int) num_files;
-   if (NULL == (at = SLang_create_array (SLANG_STRING_TYPE, 0, (VOID_STAR) list, &inum_files, 1)))
-     {
-	free_dir_list (list, num_files);
-	SLang_push_null ();
-	return;
-     }
-
-   /* Allow the array to free this list if push fails */
-   if (-1 == SLang_push_array (at, 1))
-     SLang_push_null ();
-}
-
-static void listdir_cmd_wrap (void)
-{
-   char *s, *sopt;
-
-   sopt = NULL;
-   switch (SLang_Num_Function_Args)
-     {
-      case 2:
-	if (-1 == SLang_pop_slstring (&sopt))
-	  return;
-      case 1:
-	if (-1 == SLang_pop_slstring (&s))
-	  {
-	     SLang_free_slstring (sopt);
-	     return;
-	  }
-	break;
-      default:
-	SLang_verror (SL_INVALID_PARM, "usage: listdir (string, [opt-string]");
-	return;
-     }
-
-   listdir_cmd (s, sopt);
-   SLang_free_slstring (s);
-   SLang_free_slstring (sopt);
-}
-
-#endif				       /* USE_LISTDIR_INTRINSIC */
-
-#ifdef HAVE_UMASK
-static int umask_cmd (int *u)
-{
-   return umask (*u);
-}
-#endif
-
-static SLang_Intrin_Fun_Type PosixDir_Name_Table [] =
-{
-#ifdef HAVE_READLINK
-   MAKE_INTRINSIC_S("readlink", readlink_cmd, SLANG_VOID_TYPE),
-#endif
-   MAKE_INTRINSIC_S("lstat_file", lstat_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("stat_file", stat_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SI("stat_is", stat_is_cmd, SLANG_CHAR_TYPE),
-#ifdef HAVE_MKFIFO
-   MAKE_INTRINSIC_SI("mkfifo", mkfifo_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_CHOWN
-   MAKE_INTRINSIC_SII("chown", chown_cmd, SLANG_INT_TYPE),
-#endif
-   MAKE_INTRINSIC_SI("chmod", chmod_cmd, SLANG_INT_TYPE),
-#ifdef HAVE_UMASK
-   MAKE_INTRINSIC_I("umask", umask_cmd, SLANG_INT_TYPE),
-#endif
-   MAKE_INTRINSIC_0("getcwd", slget_cwd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SI("mkdir", mkdir_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_S("chdir", chdir_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_S("rmdir", rmdir_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_S("remove", remove_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_SS("rename", rename_cmd, SLANG_INT_TYPE),
-#if USE_LISTDIR_INTRINSIC
-   MAKE_INTRINSIC("listdir", listdir_cmd_wrap, SLANG_VOID_TYPE, 0),
-#endif
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-static SLang_IConstant_Type PosixDir_Consts [] =
-{
-#ifndef S_IRWXU
-# define S_IRWXU 00700
-#endif
-   MAKE_ICONSTANT("S_IRWXU", S_IRWXU),
-#ifndef S_IRUSR
-# define S_IRUSR 00400
-#endif
-   MAKE_ICONSTANT("S_IRUSR", S_IRUSR),
-#ifndef S_IWUSR
-# define S_IWUSR 00200
-#endif
-   MAKE_ICONSTANT("S_IWUSR", S_IWUSR),
-#ifndef S_IXUSR
-# define S_IXUSR 00100
-#endif
-   MAKE_ICONSTANT("S_IXUSR", S_IXUSR),
-#ifndef S_IRWXG
-# define S_IRWXG 00070
-#endif
-   MAKE_ICONSTANT("S_IRWXG", S_IRWXG),
-#ifndef S_IRGRP
-# define S_IRGRP 00040
-#endif
-   MAKE_ICONSTANT("S_IRGRP", S_IRGRP),
-#ifndef S_IWGRP
-# define S_IWGRP 00020
-#endif
-   MAKE_ICONSTANT("S_IWGRP", S_IWGRP),
-#ifndef S_IXGRP
-# define S_IXGRP 00010
-#endif
-   MAKE_ICONSTANT("S_IXGRP", S_IXGRP),
-#ifndef S_IRWXO
-# define S_IRWXO 00007
-#endif
-   MAKE_ICONSTANT("S_IRWXO", S_IRWXO),
-#ifndef S_IROTH
-# define S_IROTH 00004
-#endif
-   MAKE_ICONSTANT("S_IROTH", S_IROTH),
-#ifndef S_IWOTH
-# define S_IWOTH 00002
-#endif
-   MAKE_ICONSTANT("S_IWOTH", S_IWOTH),
-#ifndef S_IXOTH
-# define S_IXOTH 00001
-#endif
-   MAKE_ICONSTANT("S_IXOTH", S_IXOTH),
-#ifdef __WIN32__
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_ARCHIVE", FILE_ATTRIBUTE_ARCHIVE),
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_COMPRESSED", FILE_ATTRIBUTE_COMPRESSED),
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_NORMAL", FILE_ATTRIBUTE_NORMAL),
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_DIRECTORY", FILE_ATTRIBUTE_DIRECTORY),
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_HIDDEN", FILE_ATTRIBUTE_HIDDEN),
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_READONLY", FILE_ATTRIBUTE_READONLY),
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_SYSTEM", FILE_ATTRIBUTE_SYSTEM),
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_TEMPORARY", FILE_ATTRIBUTE_TEMPORARY),
-#endif
-   SLANG_END_ICONST_TABLE
-};
-
-static int Initialized;
-
-int SLang_init_posix_dir (void)
-{
-   if (Initialized)
-     return 0;
-
-   if ((-1 == SLadd_intrin_fun_table(PosixDir_Name_Table, "__POSIX_DIR__"))
-       || (-1 == SLadd_iconstant_table (PosixDir_Consts, NULL))
-       || (-1 == _SLerrno_init ()))
-     return -1;
-
-   Initialized = 1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slposio.c b/mdk-stage1/slang/slposio.c
deleted file mode 100644
index ab1e9f689..000000000
--- a/mdk-stage1/slang/slposio.c
+++ /dev/null
@@ -1,568 +0,0 @@
-/* This module implements an interface to posix system calls */
-/* file stdio intrinsics for S-Lang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#if defined(__unix__) || (defined (__os2__) && defined (__EMX__))
-# include <sys/types.h>
-#endif
-
-#ifdef HAVE_FCNTL_H
-# include <fcntl.h>
-#endif
-#ifdef HAVE_SYS_FCNTL_H
-# include <sys/fcntl.h>
-#endif
-
-#ifdef __unix__
-# include <sys/file.h>
-#endif
-
-#ifdef HAVE_IO_H
-# include <io.h>
-#endif
-
-#if defined(__BORLANDC__)
-# include <dir.h>
-#endif
-
-#if defined(__DECC) && defined(VMS)
-# include <unixio.h>
-# include <unixlib.h>
-#endif
-
-#ifdef VMS
-# include <stat.h>
-#else
-# include <sys/stat.h>
-#endif
-
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-struct _SLFile_FD_Type
-{
-   char *name;
-   unsigned int num_refs;	       /* reference counting */
-   int fd;
-   SLang_MMT_Type *stdio_mmt;	       /* fdopen'd stdio object */
-
-   /* methods */
-   int (*close)(int);
-   int (*read) (int, char *, unsigned int *);
-   int (*write)(int, char *, unsigned int *);
-};
-
-static int close_method (int fd)
-{
-   return close (fd);
-}
-
-static int write_method (int fd, char *buf, unsigned int *nump)
-{
-   int num;
-
-   if (-1 == (num = write (fd, buf, *nump)))
-     {
-	*nump = 0;
-	return -1;
-     }
-
-   *nump = (unsigned int) num;
-   return 0;
-}
-
-static int read_method (int fd, char *buf, unsigned int *nump)
-{
-   int num;
-
-   num = read (fd, buf, *nump);
-   if (num == -1)
-     {
-	*nump = 0;
-	return -1;
-     }
-   *nump = (unsigned int) num;
-   return 0;
-}
-
-static int check_fd (int fd)
-{
-   if (fd == -1)
-     {
-#ifdef EBADF
-	_SLerrno_errno = EBADF;
-#endif
-	return -1;
-     }
-
-   return 0;
-}
-
-static int posix_close (SLFile_FD_Type *f)
-{
-   if (-1 == check_fd (f->fd))
-     return -1;
-
-   if ((f->close != NULL)
-       && (-1 == f->close (f->fd)))
-     {
-	_SLerrno_errno = errno;
-	return -1;
-     }
-
-   if (f->stdio_mmt != NULL)
-     {
-	SLang_free_mmt (f->stdio_mmt);
-	f->stdio_mmt = NULL;
-     }
-
-   f->fd = -1;
-   return 0;
-}
-
-/* Usage: Uint write (f, buf); */
-static void posix_write (SLFile_FD_Type *f, SLang_BString_Type *bstr)
-{
-   unsigned int len;
-   char *p;
-
-   if ((-1 == check_fd (f->fd))
-       || (NULL == (p = (char *)SLbstring_get_pointer (bstr, &len))))
-     {
-	SLang_push_integer (-1);
-	return;
-     }
-
-   if (-1 == f->write (f->fd, p, &len))
-     {
-	_SLerrno_errno = errno;
-	SLang_push_integer (-1);
-	return;
-     }
-
-   (void) SLang_push_uinteger (len);
-}
-
-/* Usage: nn = read (f, &buf, n); */
-static void posix_read (SLFile_FD_Type *f, SLang_Ref_Type *ref, unsigned int *nbytes)
-{
-   unsigned int len;
-   char *b;
-   SLang_BString_Type *bstr;
-
-   b = NULL;
-
-   len = *nbytes;
-   if ((-1 == check_fd (f->fd))
-       || (NULL == (b = SLmalloc (len + 1))))
-     goto return_error;
-   
-   if (-1 == f->read (f->fd, b, &len))
-     {
-	_SLerrno_errno = errno;
-	goto return_error;
-     }
-
-   if (len != *nbytes)
-     {
-	char *b1 = SLrealloc (b, len + 1);
-	if (b1 == NULL)
-	  goto return_error;
-	b = b1;
-     }
-
-   bstr = SLbstring_create_malloced ((unsigned char *) b, len, 0);
-   if (bstr != NULL)
-     {
-	if ((-1 != SLang_assign_to_ref (ref, SLANG_BSTRING_TYPE, (VOID_STAR)&bstr))
-	    && (-1 != SLang_push_uinteger (len)))
-	  return;
-
-	SLbstring_free (bstr);
-	b = NULL;
-	/* drop */
-     }
-   
-   return_error:
-   if (b != NULL) SLfree ((char *)b);
-   (void) SLang_assign_to_ref (ref, SLANG_NULL_TYPE, NULL);
-   (void) SLang_push_integer (-1);
-}
-
-SLFile_FD_Type *SLfile_create_fd (char *name, int fd)
-{
-   SLFile_FD_Type *f;
-
-   if (NULL == (f = (SLFile_FD_Type *) SLmalloc (sizeof (SLFile_FD_Type))))
-     return NULL;
-
-   memset ((char *) f, 0, sizeof (SLFile_FD_Type));
-   if (NULL == (f->name = SLang_create_slstring (name)))
-     {
-	SLfree ((char *)f);
-	return NULL;
-     }
-
-   f->fd = fd;
-   f->num_refs = 1;
-
-   f->close = close_method;
-   f->read = read_method;
-   f->write = write_method;
-
-   return f;
-}
-
-SLFile_FD_Type *SLfile_dup_fd (SLFile_FD_Type *f0)
-{
-   SLFile_FD_Type *f;
-   int fd0, fd;
-
-   if (f0 == NULL)
-     return NULL;
-   fd0 = f0->fd;
-   if (-1 == check_fd (fd0))
-     return NULL;
-
-   while (-1 == (fd = dup (fd0)))
-     {
-#ifdef EINTR
-	if (errno == EINTR)
-	  continue;
-#endif
-	_SLerrno_errno = errno;
-	return NULL;
-     }
-   
-   if (NULL == (f = SLfile_create_fd (f0->name, fd)))
-     {
-	f0->close (fd);
-	return NULL;
-     }
-   
-   return f;
-}
-
-int SLfile_get_fd (SLFile_FD_Type *f, int *fd)
-{
-   if (f == NULL)
-     return -1;
-   
-   *fd = f->fd;
-   if (-1 == check_fd (*fd))
-     return -1;
-
-   return 0;
-}
-
-void SLfile_free_fd (SLFile_FD_Type *f)
-{
-   if (f == NULL)
-     return;
-
-   if (f->num_refs > 1)
-     {
-	f->num_refs -= 1;
-	return;
-     }
-
-   if (f->fd != -1)
-     {
-	if (f->close != NULL)
-	  (void) f->close (f->fd);
-
-	f->fd = -1;
-     }
-
-   if (f->stdio_mmt != NULL)
-     SLang_free_mmt (f->stdio_mmt);
-
-   SLfree ((char *) f);
-}
-
-static int pop_string_int (char **s, int *i)
-{
-   *s = NULL;
-   if ((-1 == SLang_pop_integer (i))
-       || (-1 == SLang_pop_slstring (s)))
-     return -1;
-
-   return 0;
-}
-
-static int pop_string_int_int (char **s, int *a, int *b)
-{
-   *s = NULL;
-   if ((-1 == SLang_pop_integer (b))
-       || (-1 == pop_string_int (s, a)))
-     return -1;
-
-   return 0;
-}
-
-static void posix_open (void)
-{
-   char *file;
-   int mode, flags;
-   SLFile_FD_Type *f;
-
-   switch (SLang_Num_Function_Args)
-     {
-      case 3:
-	if (-1 == pop_string_int_int (&file, &flags, &mode))
-	  {
-	     SLang_push_null ();
-	     return;
-	  }
-	break;
-
-      case 2:
-      default:
-	if (-1 == pop_string_int (&file, &flags))
-	  return;
-	mode = 0777;
-	break;
-     }
-
-   f = SLfile_create_fd (file, -1);
-   if (f == NULL)
-     {
-	SLang_free_slstring (file);
-	SLang_push_null ();
-	return;
-     }
-   SLang_free_slstring (file);
-
-   if (-1 == (f->fd = open (f->name, flags, mode)))
-     {
-	_SLerrno_errno = errno;
-	SLfile_free_fd (f);
-	SLang_push_null ();
-	return;
-     }
-
-   if (-1 == SLfile_push_fd (f))
-     SLang_push_null ();
-   SLfile_free_fd (f);
-}
-
-static void posix_fileno (void)
-{
-   FILE *fp;
-   SLang_MMT_Type *mmt;
-   int fd;
-   SLFile_FD_Type *f;
-   char *name;
-
-   if (-1 == SLang_pop_fileptr (&mmt, &fp))
-     {
-	SLang_push_null ();
-	return;
-     }
-   name = SLang_get_name_from_fileptr (mmt);
-   fd = fileno (fp);
-
-   f = SLfile_create_fd (name, fd);
-   if (f != NULL)
-     f->close = NULL;		       /* prevent fd from being closed 
-					* when it goes out of scope
-					*/
-   SLang_free_mmt (mmt);
-
-   if (-1 == SLfile_push_fd (f))
-     SLang_push_null ();
-   SLfile_free_fd (f);
-}
-
-static void posix_fdopen (SLFile_FD_Type *f, char *mode)
-{
-   if (f->stdio_mmt == NULL)
-     {
-	if (-1 == _SLstdio_fdopen (f->name, f->fd, mode))
-	  return;
-
-	if (NULL == (f->stdio_mmt = SLang_pop_mmt (SLANG_FILE_PTR_TYPE)))
-	  return;
-     }
-
-   (void) SLang_push_mmt (f->stdio_mmt);
-}
-
-static long posix_lseek (SLFile_FD_Type *f, long ofs, int whence)
-{
-   long status;
-   
-   if (-1 == (status = lseek (f->fd, ofs, whence)))
-     _SLerrno_errno = errno;
-   
-   return status;
-}
-
-static int posix_isatty (void)
-{
-   int ret;
-   SLFile_FD_Type *f;
-
-   if (SLang_peek_at_stack () == SLANG_FILE_PTR_TYPE)
-     {
-	SLang_MMT_Type *mmt;
-	FILE *fp;
-
-	if (-1 == SLang_pop_fileptr (&mmt, &fp))
-	  return 0;		       /* invalid descriptor */
-
-	ret = isatty (fileno (fp));
-	SLang_free_mmt (mmt);
-	return ret;
-     }
-
-   if (-1 == SLfile_pop_fd (&f))
-     return 0;
-
-   ret = isatty (f->fd);
-   SLfile_free_fd (f);
-
-   return ret;
-}
-
-static void posix_dup (SLFile_FD_Type *f)
-{
-   if ((NULL == (f = SLfile_dup_fd (f)))
-       || (-1 == SLfile_push_fd (f)))
-     SLang_push_null ();
-   
-   SLfile_free_fd (f);
-}
-	
-#define I SLANG_INT_TYPE
-#define V SLANG_VOID_TYPE
-#define F SLANG_FILE_FD_TYPE
-#define B SLANG_BSTRING_TYPE
-#define R SLANG_REF_TYPE
-#define U SLANG_UINT_TYPE
-#define S SLANG_STRING_TYPE
-#define L SLANG_LONG_TYPE
-static SLang_Intrin_Fun_Type Fd_Name_Table [] =
-{
-   MAKE_INTRINSIC_0("fileno", posix_fileno, V),
-   MAKE_INTRINSIC_0("isatty", posix_isatty, I),
-   MAKE_INTRINSIC_0("open", posix_open, V),
-   MAKE_INTRINSIC_3("read", posix_read, V, F, R, U),
-   MAKE_INTRINSIC_3("lseek", posix_lseek, L, F, L, I),
-   MAKE_INTRINSIC_2("fdopen", posix_fdopen, V, F, S),
-   MAKE_INTRINSIC_2("write", posix_write, V, F, B),
-   MAKE_INTRINSIC_1("dup_fd", posix_dup, V, F),
-   MAKE_INTRINSIC_1("close", posix_close, I, F),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-#undef I
-#undef V
-#undef F
-#undef B
-#undef R
-#undef S
-#undef L
-#undef U
-
-static SLang_IConstant_Type PosixIO_Consts [] =
-{
-#ifdef O_RDONLY
-   MAKE_ICONSTANT("O_RDONLY", O_RDONLY),
-#endif
-#ifdef O_WRONLY
-   MAKE_ICONSTANT("O_WRONLY", O_WRONLY),
-#endif
-#ifdef O_RDWR
-   MAKE_ICONSTANT("O_RDWR", O_RDWR),
-#endif
-#ifdef O_APPEND
-   MAKE_ICONSTANT("O_APPEND", O_APPEND),
-#endif
-#ifdef O_CREAT
-   MAKE_ICONSTANT("O_CREAT", O_CREAT),
-#endif
-#ifdef O_EXCL
-   MAKE_ICONSTANT("O_EXCL", O_EXCL),
-#endif
-#ifdef O_NOCTTY
-   MAKE_ICONSTANT("O_NOCTTY", O_NOCTTY),
-#endif
-#ifdef O_NONBLOCK
-   MAKE_ICONSTANT("O_NONBLOCK", O_NONBLOCK),
-#endif
-#ifdef O_TRUNC
-   MAKE_ICONSTANT("O_TRUNC", O_TRUNC),
-#endif
-#ifndef O_BINARY
-# define O_BINARY 0
-#endif
-   MAKE_ICONSTANT("O_BINARY", O_BINARY),
-#ifndef O_TEXT
-# define O_TEXT 0
-#endif
-   MAKE_ICONSTANT("O_TEXT", O_TEXT),
-
-   SLANG_END_ICONST_TABLE
-};
-
-int SLfile_push_fd (SLFile_FD_Type *f)
-{
-   if (f == NULL)
-     return SLang_push_null ();
-
-   f->num_refs += 1;
-
-   if (0 == SLclass_push_ptr_obj (SLANG_FILE_FD_TYPE, (VOID_STAR) f))
-     return 0;
-
-   f->num_refs -= 1;
-
-   return -1;
-}
-
-int SLfile_pop_fd (SLFile_FD_Type **f)
-{
-   return SLclass_pop_ptr_obj (SLANG_FILE_FD_TYPE, (VOID_STAR *) f);
-}
-
-static void destroy_fd_type (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   SLfile_free_fd (*(SLFile_FD_Type **) ptr);
-}
-
-static int fd_push (unsigned char type, VOID_STAR v)
-{
-   (void) type;
-   return SLfile_push_fd (*(SLFile_FD_Type **)v);
-}
-
-int SLang_init_posix_io (void)
-{
-   SLang_Class_Type *cl;
-
-   if (NULL == (cl = SLclass_allocate_class ("FD_Type")))
-     return -1;
-   cl->cl_destroy = destroy_fd_type;
-   (void) SLclass_set_push_function (cl, fd_push);
-
-   if (-1 == SLclass_register_class (cl, SLANG_FILE_FD_TYPE, sizeof (SLFile_FD_Type), SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   if ((-1 == SLadd_intrin_fun_table(Fd_Name_Table, "__POSIXIO__"))
-       || (-1 == SLadd_iconstant_table (PosixIO_Consts, NULL))
-       || (-1 == _SLerrno_init ()))
-     return -1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slprepr.c b/mdk-stage1/slang/slprepr.c
deleted file mode 100644
index 358eeb874..000000000
--- a/mdk-stage1/slang/slprepr.c
+++ /dev/null
@@ -1,427 +0,0 @@
-/* Copyright (c) 1996, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/*--------------------------------*-C-*---------------------------------*
- * File:	slprepr.c
- *
- * preprocessing routines
- */
-/*{{{ notes: */
-/*
- * various preprocessing tokens supported
- *
- * #ifdef  TOKEN1 TOKEN2 ...
- *	- True if any of TOKEN1 TOKEN2 ... are defined
- *
- * #ifndef TOKEN1 TOKEN2 ...
- *	- True if none of TOKEN1 TOKEN2 ... are defined
- *
- * #iftrue
- * #ifnfalse
- *	- always True
- *
- * #iffalse
- * #ifntrue
- *	- always False
- *
- * #if$ENV
- *	- True if the enviroment variable ENV is set
- *
- * #ifn$ENV
- *	- True if the enviroment variable ENV is not set
- *
- * #if$ENV TOKEN1 TOKEN2 ...
- *	- True if the contents of enviroment variable ENV match
- *	  any of TOKEN1 TOKEN2 ...
- *
- * #ifn$ENV TOKEN1 TOKEN2 ...
- *	- True if the contents of enviroment variable ENV do not match
- *	  any of TOKEN1 TOKEN2 ...
- *
- *	NB: For $ENV, the tokens may contain wildcard characters:
- *		'?' - match any single character
- *		'*' - match any number of characters
- *
- * #elif...
- * #else
- * #endif
- *
- *
- * mj olesen
- *----------------------------------------------------------------------*/
-/*}}}*/
-/*{{{ includes: */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-/*}}}*/
-
-int (*SLprep_exists_hook) (char *, char);
-int (*_SLprep_eval_hook) (char *);
-
-/*{{{ SLprep_open_prep (), SLprep_close_prep () */
-int SLprep_open_prep (SLPreprocess_Type *pt)
-{
-   pt->this_level = 0;
-   pt->exec_level = 0;
-   pt->prev_exec_level = 0;
-   pt->comment_char = '%';
-   pt->preprocess_char = '#';
-   pt->flags = 0;
-   return 0;
-}
-
-void SLprep_close_prep (SLPreprocess_Type *pt)
-{
-   (void) pt;
-}
-/*}}}*/
-
-/*{{{ SLwildcard () */
-/*----------------------------------------------------------------------*
- * Does `string' match `pattern' ?
- *
- * '*' in pattern matches any sub-string (including the null string)
- * '?' matches any single char.
- *
- * Code taken from that donated by Paul Hudson <paulh@harlequin.co.uk>
- * to the fvwm project.
- * It is public domain, no strings attached. No guarantees either.
- *----------------------------------------------------------------------*/
-static int SLwildcard (char *pattern, char *string)
-{
-   if (pattern == NULL || *pattern == '\0' || !strcmp (pattern, "*"))
-     return 1;
-   else if (string == NULL)
-     return 0;
-
-   while (*pattern && *string) switch (*pattern)
-     {
-      case '?':
-	/* match any single character */
-	pattern++;
-	string++;
-	break;
-
-      case '*':
-	/* see if rest of pattern matches any trailing */
-	/* substring of the string. */
-	if (*++pattern == '\0')
-	  return 1;	/* trailing * must match rest */
-
-	while (*string)
-	  {
-	     if (SLwildcard (pattern, string)) return 1;
-	     string++;
-	  }
-	return 0;
-
-	/* break; */
-
-      default:
-	if (*pattern == '\\')
-	  {
-	     if (*++pattern == '\0')
-	       pattern--;	/* don't skip trailing backslash */
-	  }
-	if (*pattern++ != *string++) return 0;
-	break;
-     }
-
-   return ((*string == '\0')
-	   && ((*pattern == '\0') || !strcmp (pattern, "*")));
-}
-/*}}}*/
-
-#if defined(__16_BIT_SYSTEM__)
-# define MAX_DEFINES 10
-#else
-# define MAX_DEFINES 128
-#endif
-
-/* The extra one is for NULL termination */
-char *_SLdefines [MAX_DEFINES + 1];
-
-int SLdefine_for_ifdef (char *s)	/*{{{*/
-{
-   unsigned int i;
-
-   for (i = 0; i < MAX_DEFINES; i++)
-     {
-	char *s1 = _SLdefines [i];
-
-	if (s1 == s)
-	  return 0;		       /* already defined (hashed string) */
-
-	if (s1 != NULL)
-	  continue;
-
-	s = SLang_create_slstring (s);
-	if (s == NULL)
-	  return -1;
-
-	_SLdefines[i] = s;
-	return 0;
-     }
-   return -1;
-}
-/*}}}*/
-
-/*{{{ static functions */
-static int is_any_defined(char *buf, char comment)	/*{{{*/
-{
-   char *sys;
-   unsigned int i;
-
-   while (1)
-     {
-	register char ch;
-
-	/* Skip whitespace */
-	while (((ch = *buf) == ' ') || (ch == '\t'))
-	  buf++;
-
-	if ((ch == '\n') || (ch == 0) || (ch == comment))
-	  return 0;
-
-	i = 0;
-	while (NULL != (sys = _SLdefines [i++]))
-	  {
-	     unsigned int n;
-
-	     if (*sys != ch)
-	       continue;
-
-	     n = strlen (sys);
-	     if (0 == strncmp (buf, sys, n))
-	       {
-		  char ch1 = *(buf + n);
-
-		  if ((ch1 == '\n') || (ch1 == 0) ||
-		      (ch1 == ' ') || (ch1 == '\t') || (ch1 == comment))
-		    return 1;
-	       }
-	  }
-
-	/* Skip past word */
-	while (((ch = *buf) != ' ')
-	       && (ch != '\n')
-	       && (ch != 0)
-	       && (ch != '\t')
-	       && (ch != comment))
-	  buf++;
-     }
-}
-/*}}}*/
-
-static unsigned char *tokenize (unsigned char *buf, char *token, unsigned int len)
-{
-   register char *token_end;
-
-   token_end = token + (len - 1);      /* allow room for \0 */
-
-   while ((token < token_end) && (*buf > ' '))
-     *token++ = *buf++;
-
-   if (*buf > ' ') return NULL;	/* token too long */
-
-   *token = '\0';
-
-   while ((*buf == ' ') || (*buf == '\t')) buf++;
-
-   return buf;
-}
-
-static int is_env_defined (char *buf, char comment)	/*{{{*/
-{
-   char * env, token [32];
-
-   if ((*buf <= ' ') || (*buf == comment)) return 0;	/* no token */
-
-   if (NULL == (buf = (char *) tokenize ((unsigned char *) buf,
-					 token, sizeof (token))))
-     return 0;
-
-   if (NULL == (env = getenv (token)))
-     return 0;		/* ENV not defined */
-
-   if ((*buf == '\0') || (*buf == '\n') || (*buf == comment))
-     return 1;			/* no tokens, but getenv() worked */
-
-   do
-     {
-	buf = (char *) tokenize ((unsigned char *) buf, token, sizeof (token));
-	if (buf == NULL) return 0;
-
-	if (SLwildcard (token, env))
-	  return 1;
-     }
-   while (*buf && (*buf != '\n') && (*buf != comment));
-
-   return 0;
-}
-/*}}}*/
-/*}}}*/
-
-int SLprep_line_ok (char *buf, SLPreprocess_Type *pt)	/*{{{*/
-{
-   int level, prev_exec_level, exec_level;
-
-   if ((buf == NULL) || (pt == NULL)) return 1;
-
-   if (*buf != pt->preprocess_char)
-     {
-	if (pt->this_level != pt->exec_level)
-	  return 0;
-
-	if (*buf == '\n') return pt->flags & SLPREP_BLANK_LINES_OK;
-	if (*buf == pt->comment_char) return pt->flags & SLPREP_COMMENT_LINES_OK;
-
-	return 1;
-     }
-
-   level = pt->this_level;
-   exec_level = pt->exec_level;
-   prev_exec_level = pt->prev_exec_level;
-
-   buf++;
-
-   /* Allow '#!' to pass.  This could be a shell script with something
-    like '#! /local/bin/slang'  */
-   if ((*buf == '!') && (pt->preprocess_char == '#'))
-     return 0;
-
-   /* Allow whitespace as in '#   ifdef'  */
-   while ((*buf == ' ') || (*buf == '\t')) buf++;
-   if (*buf < 'a') return (level == exec_level);
-
-   if (!strncmp(buf, "endif", 5))
-     {
-	if (level == exec_level)
-	  {
-	     exec_level--;
-	     prev_exec_level = exec_level;
-	  }
-	level--;
-	if (level < prev_exec_level) prev_exec_level = level;
-	goto done;
-     }
-
-   if ((buf[0] == 'e') && (buf[1] == 'l'))   /* else, elifdef, ... */
-     {
-	if ((level == exec_level + 1)
-	    && (prev_exec_level != level))
-	  {
-	     /* We are in position to execute */
-	     buf += 2;
-	     if ((buf[0] == 's') && (buf[1] == 'e'))
-	       {
-		  /* "else" */
-		  exec_level = level;
-		  goto done;
-	       }
-
-	     /* drop through to ifdef testing.  First set variable
-	      * to values appropriate for ifdef testing.
-	      */
-	     level--;		       /* now == to exec level */
-	  }
-	else
-	  {
-	     if (level == exec_level)
-	       {
-		  exec_level--;
-	       }
-	     goto done;
-	  }
-     }
-
-   if ((buf[0] == 'i') && (buf[1] == 'f'))
-     {
-	int truth;
-
-	if (level != exec_level)
-	  {
-	     /* Not interested */
-	     level++;
-	     goto done;
-	  }
-
-	level++;
-
-	buf += 2;
-	if (buf[0] == 'n')
-	  {
-	     truth = 0;
-	     buf++;
-	  }
-	else truth = 1;
-
-	if (!strncmp (buf, "def", 3))
-	  truth = (truth == is_any_defined(buf + 3, pt->comment_char));
-
-	else if (!strncmp (buf, "false", 5))
-	  truth = !truth;
-
-	else if (*buf == '$')
-	  truth = (truth == is_env_defined (buf + 1, pt->comment_char));
-
-	else if (!strncmp (buf, "exists", 6)
-		 && (SLprep_exists_hook != NULL))
-	  truth = (truth == (*SLprep_exists_hook)(buf + 6, pt->comment_char));
-
-	else if (!strncmp (buf, "eval", 4)
-		 && (_SLprep_eval_hook != NULL))
-	  truth = (truth == (*_SLprep_eval_hook) (buf + 4));
-			   
-	else if (0 != strncmp (buf, "true", 4))
-	  return 1;		       /* let it bomb */
-
-	if (truth)
-	  {
-	     exec_level = level;
-	     prev_exec_level = exec_level;
-	  }
-     }
-   else return 1;  /* let it bomb. */
-
-   done:
-
-   if (exec_level < 0) return 1;
-
-   pt->this_level = level;
-   pt->exec_level = exec_level;
-   pt->prev_exec_level = prev_exec_level;
-   return 0;
-}
-/*}}}*/
-
-/*{{{ main() - for testing only */
-#if 0
-int main ()
-{
-   char buf[1024];
-   SLPreprocess_Type pt;
-
-   SLprep_open_prep (&pt);
-
-   SLdefine_for_ifdef ("UNIX");
-
-   while (NULL != fgets (buf, sizeof (buf) - 1, stdin))
-     {
-	if (SLprep_line_ok (buf, &pt))
-	  {
-	     fputs (buf, stdout);
-	  }
-     }
-
-   SLprep_close_prep (&pt);
-   return 0;
-}
-#endif
-/*}}}*/
diff --git a/mdk-stage1/slang/slproc.c b/mdk-stage1/slang/slproc.c
deleted file mode 100644
index 8b266f28f..000000000
--- a/mdk-stage1/slang/slproc.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/* Process specific system calls */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#ifdef HAVE_IO_H
-# include <io.h>		       /* for chmod */
-#endif
-
-#ifdef HAVE_PROCESS_H
-# include <process.h>			/* for getpid */
-#endif
-
-#if defined(__BORLANDC__)
-# include <dos.h>
-#endif
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <signal.h>
-#include <time.h>
-
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef HAVE_KILL
-static int kill_cmd (int *pid, int *sig)
-{
-   int ret;
-
-   if (-1 == (ret = kill ((pid_t) *pid, *sig)))
-     _SLerrno_errno = errno;
-   return ret;
-}
-#endif
-
-static int getpid_cmd (void)
-{
-   return getpid ();
-}
-
-#ifdef HAVE_GETPPID
-static int getppid_cmd (void)
-{
-   return getppid ();
-}
-#endif
-
-#ifdef HAVE_GETGID
-static int getgid_cmd (void)
-{
-   return getgid ();
-}
-#endif
-
-#ifdef HAVE_GETEGID
-static int getegid_cmd (void)
-{
-   return getegid ();
-}
-#endif
-
-#ifdef HAVE_GETEUID
-static int geteuid_cmd (void)
-{
-   return geteuid ();
-}
-#endif
-
-#ifdef HAVE_GETUID
-static int getuid_cmd (void)
-{
-   return getuid ();
-}
-#endif
-
-#ifdef HAVE_SETGID
-static int setgid_cmd (int *gid)
-{
-   if (0 == setgid (*gid))
-     return 0;
-   _SLerrno_errno = errno;
-   return -1;
-}
-#endif
-
-#ifdef HAVE_SETPGID
-static int setpgid_cmd (int *pid, int *pgid)
-{
-   if (0 == setpgid (*pid, *pgid))
-     return 0;
-   _SLerrno_errno = errno;
-   return -1;
-}
-#endif
-
-#ifdef HAVE_SETUID
-static int setuid_cmd (int *uid)
-{
-   if (0 == setuid (*uid))
-     return 0;
-   _SLerrno_errno = errno;
-   return -1;
-}
-#endif
-
-static SLang_Intrin_Fun_Type Process_Name_Table[] =
-{
-   MAKE_INTRINSIC_0("getpid", getpid_cmd, SLANG_INT_TYPE),
-
-#ifdef HAVE_GETPPID
-   MAKE_INTRINSIC_0("getppid", getppid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_GETGID
-   MAKE_INTRINSIC_0("getgid", getgid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_GETEGID
-   MAKE_INTRINSIC_0("getegid", getegid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_GETEUID
-   MAKE_INTRINSIC_0("geteuid", geteuid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_GETUID
-   MAKE_INTRINSIC_0("getuid", getuid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_SETGID
-   MAKE_INTRINSIC_I("setgid", setgid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_SETPGID
-   MAKE_INTRINSIC_II("setpgid", setpgid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_SETUID
-   MAKE_INTRINSIC_I("setuid", setuid_cmd, SLANG_INT_TYPE),
-#endif
-
-#ifdef HAVE_KILL
-   MAKE_INTRINSIC_II("kill", kill_cmd, SLANG_INT_TYPE),
-#endif
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-int SLang_init_posix_process (void)
-{
-   if ((-1 == SLadd_intrin_fun_table (Process_Name_Table, "__POSIX_PROCESS__"))
-       || (-1 == _SLerrno_init ()))
-     return -1;
-   return 0;
-}
diff --git a/mdk-stage1/slang/slregexp.c b/mdk-stage1/slang/slregexp.c
deleted file mode 100644
index 6592a5a63..000000000
--- a/mdk-stage1/slang/slregexp.c
+++ /dev/null
@@ -1,935 +0,0 @@
-/* ed style regular expressions */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#define SET_BIT(b, n) b[(unsigned int) (n) >> 3] |= 1 << ((unsigned int) (n) % 8)
-#define TEST_BIT(b, n) (b[(unsigned int)(n) >> 3] & (1 << ((unsigned int) (n) % 8)))
-#define LITERAL 1
-#define RANGE 2			       /* [...] */
-#define ANY 3			       /* . */
-#define BOL 4			       /* ^ */
-#define EOL 5			       /* $ */
-#define NTH_MATCH 6		       /* \1 \2 ... \9 */
-#define OPAREN 7		       /* \( */
-#define CPAREN 0x8		       /* \) */
-#define ANY_DIGIT 0x9		       /* \d */
-#define BOW	0xA		       /* \< */
-#define EOW	0xB		       /* \> */
-#if 0
-#define NOT_LITERAL		0xC	       /* \~ */
-#endif
-#define STAR 0x80		       /* * */
-#define LEAST_ONCE 0x40		       /* + */
-#define MAYBE_ONCE 0x20		       /* ? */
-#define MANY 0x10		       /* {n,m} */
-/* The rest are additions */
-#define YES_CASE (STAR | BOL)
-#define NO_CASE  (STAR | EOL)
-
-#define UPPERCASE(x)  (cs ? (x) : UPPER_CASE(x))
-#define LOWERCASE(x)  (cs ? (x) : LOWER_CASE(x))
-
-static unsigned char Word_Chars[256];
-#define IS_WORD_CHAR(x) Word_Chars[(unsigned int) (x)]
-
-#if 0
-static int ctx->open_paren_number;
-static char Closed_Paren_Matches[10];
-
-static SLRegexp_Type *This_Reg;
-static unsigned char *This_Str;
-#endif
-
-typedef struct
-{
-   SLRegexp_Type *reg;
-   unsigned char *str;
-   unsigned int len;
-   char closed_paren_matches[10];
-   int open_paren_number;
-}
-Re_Context_Type;
-
-static unsigned char *do_nth_match (Re_Context_Type *ctx, int n, unsigned char *str, unsigned char *estr)
-{
-   unsigned char *bpos;
-
-   if (ctx->closed_paren_matches[n] == 0)
-     return NULL;
-
-   bpos = ctx->reg->beg_matches[n] + ctx->str;
-   n = ctx->reg->end_matches[n];
-   if (n == 0) return(str);
-   if (n > (int) (estr - str)) return (NULL);
-
-   /* This needs fixed for case sensitive match */
-   if (0 != strncmp((char *) str, (char *) bpos, (unsigned int) n)) return (NULL);
-   str += n;
-   return (str);
-}
-
-/* returns pointer to the end of regexp or NULL */
-static unsigned char *regexp_looking_at (Re_Context_Type *ctx, register unsigned char *str, unsigned char *estr, unsigned char *buf, register int cs)
-{
-   register unsigned char p, p1;
-   unsigned char *save_str, *tmpstr;
-   int n, n0, n1;
-   int save_num_open;
-   char save_closed_matches[10];
-
-   p = *buf++;
-
-   while (p != 0)
-     {
-	/* p1 = UPPERCASE(*buf); */
-	/* if (str < estr) c = UPPERCASE(*str); */
-
-	switch((unsigned char) p)
-	  {
-	   case BOW:
-	     if ((str != ctx->str)
-		 && ((str >= estr)
-		     || IS_WORD_CHAR(*(str - 1))
-		     || (0 == IS_WORD_CHAR(*str)))) return NULL;
-	     break;
-
-	   case EOW:
-	     if ((str < estr)
-		 && IS_WORD_CHAR (*str)) return NULL;
-	     break;
-
-	   case YES_CASE: cs = 1; break;
-	   case NO_CASE: cs = 0; break;
-
-	   case OPAREN:
-	     ctx->open_paren_number++;
-	     ctx->reg->beg_matches[ctx->open_paren_number] = (int) (str - ctx->str);
-	     break;
-	   case CPAREN:
-	     n = ctx->open_paren_number;
-	     while (n > 0)
-	       {
-		  if (ctx->closed_paren_matches[n] != 0)
-		    {
-		       n--;
-		       continue;
-		    }
-		  ctx->closed_paren_matches[n] = 1;
-		  ctx->reg->end_matches[n] = (unsigned int) (str - (ctx->str + ctx->reg->beg_matches[n]));
-		  break;
-	       }
-	     break;
-#ifdef NOT_LITERAL
-	   case NOT_LITERAL:
-	     if ((str >= estr) || (*buf == UPPERCASE(*str))) return (NULL);
-	     str++; buf++;
-	     break;
-
-	   case MAYBE_ONCE | NOT_LITERAL:
-	     save_str = str;
-	     if ((str < estr) && (*buf != UPPERCASE(*str))) str++;
-	     buf++;
-	     goto match_rest;
-
-	   case NOT_LITERAL | LEAST_ONCE:   /* match at least once */
-	     if ((str >= estr) || (UPPERCASE(*str) == UPPERCASE(*buf))) return (NULL);
-	     str++;
-	     /* drop */
-	   case STAR | NOT_LITERAL:
-	     save_str = str;  p1 = *buf;
-	     while ((str < estr) && (UPPERCASE(*str) != p1)) str++;
-	     buf++;
-	     goto match_rest;
-
-	     /* this type consists of the expression + two bytes that
-	        determine number of matches to perform */
-	   case MANY | NOT_LITERAL:
-	     p1 = *buf; buf++;
-	     n = n0 = (int) (unsigned char) *buf++;
-	     /* minimum number to match--- could be 0 */
-	     n1 = (int) (unsigned char) *buf++;
-	     /* maximum number to match */
-
-	     while (n && (str < estr) && (p1 != *str))
-	       {
-		  n--;
-		  str++;
-	       }
-	     if (n) return (NULL);
-
-	     save_str = str;
-	     n = n1 - n0;
-	     while (n && (str < estr) && (p1 != *str))
-	       {
-		  n--;
-		  str++;
-	       }
-	     goto match_rest;
-#endif				       /* NOT_LITERAL */
-	   case LITERAL:
-	     if ((str >= estr) || (*buf != UPPERCASE(*str))) return (NULL);
-	     str++; buf++;
-	     break;
-
-	   case MAYBE_ONCE | LITERAL:
-	     save_str = str;
-	     if ((str < estr) && (*buf == UPPERCASE(*str))) str++;
-	     buf++;
-	     goto match_rest;
-
-	   case LITERAL | LEAST_ONCE:   /* match at least once */
-	     if ((str >= estr) || (UPPERCASE(*str) != UPPERCASE(*buf))) return (NULL);
-	     str++;
-	     /* drop */
-	   case STAR | LITERAL:
-	     save_str = str;  p1 = *buf;
-	     while ((str < estr) && (UPPERCASE(*str) == p1)) str++;
-	     buf++;
-	     goto match_rest;
-
-	     /* this type consists of the expression + two bytes that
-	        determine number of matches to perform */
-	   case MANY | LITERAL:
-	     p1 = *buf; buf++;
-	     n = n0 = (int) (unsigned char) *buf++;
-	     /* minimum number to match--- could be 0 */
-	     n1 = (int) (unsigned char) *buf++;
-	     /* maximum number to match */
-
-	     while (n && (str < estr) && (p1 == *str))
-	       {
-		  n--;
-		  str++;
-	       }
-	     if (n) return (NULL);
-
-	     save_str = str;
-	     n = n1 - n0;
-	     while (n && (str < estr) && (p1 == *str))
-	       {
-		  n--;
-		  str++;
-	       }
-	     goto match_rest;
-
-	   case NTH_MATCH:
-	     if ((str = do_nth_match(ctx, (int) (unsigned char) *buf, str, estr)) == NULL) return(NULL);
-	     buf++;
-	     break;
-
-	   case MAYBE_ONCE | NTH_MATCH:
-	     save_str = str;
-	     tmpstr = do_nth_match (ctx, (int) (unsigned char) *buf, str, estr);
-	     buf++;
-	     if (tmpstr != NULL)
-	       {
-		  str = tmpstr;
-		  goto match_rest;
-	       }
-	     continue;
-
-	   case LEAST_ONCE | NTH_MATCH:
-	     if ((str = do_nth_match(ctx, (int) (unsigned char) *buf, str, estr)) == NULL) return(NULL);
-	     /* drop */
-	   case STAR | NTH_MATCH:
-	     save_str = str;
-	     while (NULL != (tmpstr = do_nth_match(ctx, (int) (unsigned char) *buf, str, estr)))
-	       {
-		  str = tmpstr;
-	       }
-	     buf++;
-	     goto match_rest;
-
-	   case MANY | NTH_MATCH: return(NULL);
-	     /* needs done */
-
-	   case RANGE:
-	     if (str >= estr) return (NULL);
-	     if (TEST_BIT(buf, UPPERCASE(*str)) == 0) return (NULL);
-	     buf += 32; str++;
-	     break;
-
-	   case MAYBE_ONCE | RANGE:
-	     save_str = str;
-	     if ((str < estr) && TEST_BIT(buf, UPPERCASE(*str))) str++;
-	     buf += 32;
-	     goto match_rest;
-
-	   case LEAST_ONCE | RANGE:
-	     if ((str >= estr) || (0 == TEST_BIT(buf, UPPERCASE(*str)))) return NULL;
-	     str++;
-	     /* drop */
-	   case STAR | RANGE:
-	     save_str = str;
-	     while ((str < estr) && TEST_BIT(buf, UPPERCASE(*str))) str++;
-	     buf += 32;
-	     goto match_rest;
-
-	     /* The first 32 bytes correspond to the range and the two
-	      * following bytes indicate the min and max number of matches.
-	      */
-	   case MANY | RANGE:
-	     /* minimum number to match--- could be 0 */
-	     n = n0 = (int) (unsigned char) *(buf + 32);
-	     /* maximum number to match */
-	     n1 = (int) (unsigned char) *(buf + 33);
-
-	     while (n && (str < estr) && (TEST_BIT(buf, UPPERCASE(*str))))
-	       {
-		  n--;
-		  str++;
-	       }
-	     if (n) return (NULL);
-	     save_str = str;
-	     n = n1 - n0;
-	     while (n && (str < estr) && (TEST_BIT(buf, UPPERCASE(*str))))
-	       {
-		  n--;
-		  str++;
-	       }
-	     buf += 34;		       /* 32 + 2 */
-	     goto match_rest;
-
-	   case ANY_DIGIT:
-	     if ((str >= estr) || (*str > '9') || (*str < '0')) return (NULL);
-	     str++;
-	     break;
-
-	   case MAYBE_ONCE | ANY_DIGIT:
-	     save_str = str;
-	     if ((str < estr) && ((*str > '9') || (*str < '0'))) str++;
-	     goto match_rest;
-
-	   case LEAST_ONCE | ANY_DIGIT:
-	     if ((str >= estr) || ((*str > '9') || (*str < '0'))) return NULL;
-	     str++;
-	     /* drop */
-	   case STAR | ANY_DIGIT:
-	     save_str = str;
-	     while ((str < estr) && ((*str <= '9') && (*str >= '0'))) str++;
-	     goto match_rest;
-
-	   case MANY | ANY_DIGIT:
-	     /* needs finished */
-	     return (NULL);
-
-	   case ANY:
-	     if ((str >= estr) || (*str == '\n')) return (NULL);
-	     str++;
-	     break;
-
-	   case MAYBE_ONCE | ANY:
-	     save_str = str;
-	     if ((str < estr) && (*str != '\n')) str++;
-	     goto match_rest;
-
-	   case LEAST_ONCE | ANY:
-	     if ((str >= estr) || (*str == '\n')) return (NULL);
-	     str++;
-	     /* drop */
-	   case STAR | ANY:
-	     save_str = str;
-	     while ((str < estr) && (*str != '\n')) str++;
-	     goto match_rest;
-
-	   case MANY | ANY:
-	     return (NULL);
-	     /* needs finished */
-
-	   case EOL:
-	     if ((str >= estr) || (*str == '\n')) return (str);
-	     return(NULL);
-
-	   default: return (NULL);
-	  }
-	p = *buf++;
-	continue;
-
-	match_rest:
-	if (save_str == str)
-	  {
-	     p = *buf++;
-	     continue;
-	  }
-
-	/* if (p == EOL)
-	 * {
-	 * if (str < estr) return (NULL); else return (str);
-	 * }
-	 */
-
-	SLMEMCPY(save_closed_matches, ctx->closed_paren_matches, sizeof(save_closed_matches));
-	save_num_open = ctx->open_paren_number;
-	while (str >= save_str)
-	  {
-	     tmpstr = regexp_looking_at (ctx, str, estr, buf, cs);
-	     if (tmpstr != NULL) return(tmpstr);
-	     SLMEMCPY(ctx->closed_paren_matches, save_closed_matches, sizeof(ctx->closed_paren_matches));
-	     ctx->open_paren_number = save_num_open;
-	     str--;
-	  }
-	return NULL;
-     }
-   if ((p != 0) && (p != EOL)) return (NULL); else return (str);
-}
-
-static void
-fixup_beg_end_matches (Re_Context_Type *ctx, SLRegexp_Type *r, unsigned char *str, unsigned char *epos)
-{
-   int i;
-
-   if (str == NULL)
-     {
-	r->beg_matches[0] = -1;
-	r->end_matches[0] = 0;
-	SLMEMSET(ctx->closed_paren_matches, 0, sizeof(ctx->closed_paren_matches));
-     }
-   else
-     {
-	r->beg_matches[0] = (int) (str - ctx->str);
-	r->end_matches[0] = (unsigned int) (epos - str);
-     }
-
-   for (i = 1; i < 10; i++)
-     {
-	if (ctx->closed_paren_matches [i] == 0)
-	  {
-	     r->beg_matches[i] = -1;
-	     r->end_matches[i] = 0;
-	  }
-     }
-}
-
-static void init_re_context (Re_Context_Type *ctx, SLRegexp_Type *reg, 
-			     unsigned char *str, unsigned int len)
-{
-   memset ((char *) ctx, 0, sizeof (Re_Context_Type));
-   ctx->reg = reg;
-   ctx->str = str;
-   ctx->len = len;
-}
-
-unsigned char *SLang_regexp_match(unsigned char *str,
-				  unsigned int len, SLRegexp_Type *reg)
-{
-   register unsigned char c = 0, *estr = str + len;
-   int cs = reg->case_sensitive, lit = 0;
-   unsigned char *buf = reg->buf, *epos = NULL;
-   Re_Context_Type ctx_buf;
-
-   if (reg->min_length > len) return NULL;
-
-   init_re_context (&ctx_buf, reg, str, len);
-
-   if (*buf == BOL)
-     {
-	if (NULL == (epos = regexp_looking_at (&ctx_buf, str, estr, buf + 1, cs)))
-	  str = NULL;
-
-	fixup_beg_end_matches (&ctx_buf, reg, str, epos);
-	return str;
-     }
-
-   if (*buf == NO_CASE)
-     {
-	buf++;  cs = 0;
-     }
-
-   if (*buf == YES_CASE)
-     {
-	buf++;  cs = 1;
-     }
-
-   if (*buf == LITERAL)
-     {
-	lit = 1;
-	c = *(buf + 1);
-     }
-   else if ((*buf == OPAREN) && (*(buf + 1) == LITERAL))
-     {
-	lit = 1;
-	c = *(buf + 2);
-     }
-
-   while (str < estr)
-     {
-	ctx_buf.open_paren_number = 0;
-	memset (ctx_buf.closed_paren_matches, 0, sizeof(ctx_buf.closed_paren_matches));
-	/* take care of leading chars */
-	if (lit)
-	  {
-	     while ((str < estr) && (c != UPPERCASE(*str))) str++;
-	     if (str >= estr)
-	       break;		       /* failed */
-	  }
-
-	if (NULL != (epos = regexp_looking_at(&ctx_buf, str, estr, buf, cs)))
-	  {
-	     fixup_beg_end_matches (&ctx_buf, reg, str, epos);
-	     return str;
-	  }
-	str++;
-     }
-   fixup_beg_end_matches (&ctx_buf, reg, NULL, epos);
-   return NULL;
-}
-
-static unsigned char *convert_digit(unsigned char *pat, int *nn)
-{
-   int n = 0, m = 0;
-   unsigned char c;
-   while (c = (unsigned char) *pat, (c <= '9') && (c >= '0'))
-     {
-	pat++;
-	n = 10 * n + (c - '0');
-	m++;
-     }
-   if (m == 0)
-     {
-	return (NULL);
-     }
-   *nn = n;
-   return pat;
-}
-
-#define ERROR  return (int) (pat - reg->pat)
-
-/* Returns 0 if successful or offset in pattern of error */
-int SLang_regexp_compile (SLRegexp_Type *reg)
-{
-   register unsigned char *buf, *ebuf, *pat;
-   unsigned char *last = NULL, *tmppat;
-   register unsigned char c;
-   int i, reverse = 0, n, cs;
-   int oparen = 0, nparen = 0;
-   /* substring stuff */
-   int count, last_count, this_max_mm = 0, max_mm = 0, ordinary_search,
-     no_osearch = 0, min_length = 0;
-   unsigned char *mm_p = NULL, *this_mm_p = NULL;
-   static int already_initialized;
-
-   reg->beg_matches[0] = reg->end_matches[0] = 0;
-   buf = reg->buf;
-   ebuf = (reg->buf + reg->buf_len) - 2; /* make some room */
-   pat = reg->pat;
-   cs = reg->case_sensitive;
-
-   if (already_initialized == 0)
-     {
-	SLang_init_case_tables ();
-#ifdef IBMPC_SYSTEM
-	SLmake_lut (Word_Chars, (unsigned char *) "_0-9a-zA-Z\200-\232\240-\245\341-\353", 0);
-#else
-	SLmake_lut (Word_Chars, (unsigned char *) "_0-9a-zA-Z\277-\326\330-\336\340-\366\370-\376", 0);
-#endif
-	already_initialized = 1;
-     }
-
-   i = 1; while (i < 10)
-     {
-	reg->beg_matches[i] = -1;
-	reg->end_matches[i] = 0;
-	i++;
-     }
-
-   if (*pat == '\\')
-     {
-	if (pat[1] == 'c')
-	  {
-	     cs = 1;
-	     pat += 2;
-	     no_osearch = 1;
-	  }
-	else if (pat[1] == 'C')
-	  {
-	     cs = 0;
-	     pat += 2;
-	     no_osearch = 1;
-	  }
-     }
-
-   if (*pat == '^')
-     {
-	pat++;
-	*buf++ = BOL;
-	reg->must_match_bol = 1;
-     }
-   else reg->must_match_bol = 0;
-
-   if (cs != reg->case_sensitive)
-     {
-	if (cs) *buf++ = YES_CASE; 
-	else *buf++ = NO_CASE; 
-     }
-
-   *buf = 0;
-
-   last_count = count = 0;
-   while ((c = *pat++) != 0)
-     {
-	if (buf >= ebuf - 3)
-	  {
-	     SLang_doerror ("Pattern too large to be compiled.");
-	     ERROR;
-	  }
-
-	count++;
-	switch (c)
-	  {
-	   case '$':
-	     if (*pat != 0) goto literal_char;
-	     *buf++ = EOL;
-	     break;
-
-	   case '\\':
-	     c = *pat++;
-	     no_osearch = 1;
-	     switch(c)
-	       {
-		case 'e': c = 033; goto literal_char;
-		case 'n': c = '\n'; goto literal_char;
-		case 't': c = '\t'; goto literal_char;
-		case 'C': cs = 0; *buf++ = NO_CASE; break;
-		case 'c': cs = 1; *buf++ = YES_CASE; break;
-		case '1': case '2': case '3':  case '4':  case '5':
-		case '6': case '7': case '8':  case '9':
-		  c = c - '0';
-		  if ((int) c > nparen) ERROR;
-		  last = buf;
-		  *buf++ = NTH_MATCH; *buf++ = c;
-		  break;
-#ifdef NOT_LITERAL
-		case '~':	       /* slang extension */
-		  if ((c = *pat) == 0) ERROR;
-		  pat++;
-		  last = buf;
-		  *buf++ = NOT_LITERAL;
-		  *buf++ = c;
-		  min_length++;
-		  break;
-#endif
-		case 'd':	       /* slang extension */
-		  last = buf;
-		  *buf++ = ANY_DIGIT;
-		  min_length++;
-		  break;
-
-		case '<':
-		  last = NULL;
-		  *buf++ = BOW;
-		  break;
-
-		case '>':
-		  last = NULL;
-		  *buf++ = EOW;
-		  break;
-
-		case '{':
-		  if (last == NULL) goto literal_char;
-		  *last |= MANY;
-		  tmppat = convert_digit(pat, &n);
-		  if (tmppat == NULL) ERROR;
-		  pat = tmppat;
-		  *buf++ = n;
-
-		  min_length += (n - 1);
-
-		  if (*pat == '\\')
-		    {
-		       *buf++ = n;
-		    }
-		  else if (*pat == ',')
-		    {
-		       pat++;
-		       if (*pat == '\\')
-			 {
-			    n = 255;
-			 }
-		       else
-			 {
-			    tmppat = convert_digit(pat, &n);
-			    if (tmppat == NULL) ERROR;
-			    pat = tmppat;
-			    if (*pat != '\\') ERROR;
-			 }
-		       *buf++ = n;
-		    }
-		  else ERROR;
-		  last = NULL;
-		  pat++;
-		  if (*pat != '}') ERROR;
-		  pat++;
-		  break;   /* case '{' */
-
-		case '(':
-		  oparen++;
-		  if (oparen > 9) ERROR;
-		  *buf++ = OPAREN;
-		  break;
-		case ')':
-		  if (oparen == 0) ERROR;
-		  oparen--;
-		  nparen++;
-		  *buf++ = CPAREN;
-		  break;
-
-		case 0: ERROR;
-		default:
-		  goto literal_char;
-	       }
-	     break;
-
-	   case '[':
-
-	     *buf = RANGE;
-	     last = buf++;
-
-	     if (buf + 32 >= ebuf) ERROR;
-
-	     for (i = 0; i < 32; i++) buf[i] = 0;
-	     c = *pat++;
-	     if (c == '^')
-	       {
-		  reverse = 1;
-		  SET_BIT(buf, '\n');
-		  c = *pat++;
-	       }
-
-	     if (c == ']')
-	       {
-		  SET_BIT(buf, c);
-		  c = *pat++;
-	       }
-	     while (c && (c != ']'))
-	       {
-		  if (c == '\\')
-		    {
-		       c = *pat++;
-		       switch(c)
-			 {
-			    case 'n': c = '\n'; break;
-			    case 't': c = '\t'; break;
-			    case 0: ERROR;
-			 }
-		    }
-
-		  if (*pat == '-')
-		    {
-		       pat++;
-		       while (c < *pat)
-			 {
-			    if (cs == 0)
-			      {
-				 SET_BIT(buf, UPPERCASE(c));
-				 SET_BIT(buf, LOWERCASE(c));
-			      }
-			    else SET_BIT(buf, c);
-			    c++;
-			 }
-		    }
-		  if (cs == 0)
-		    {
-		       SET_BIT(buf, UPPERCASE(c));
-		       SET_BIT(buf, LOWERCASE(c));
-		    }
-		  else SET_BIT(buf, c);
-		  c = *pat++;
-	       }
-	     if (c != ']') ERROR;
-	     if (reverse) for (i = 0; i < 32; i++) buf[i] = buf[i] ^ 0xFF;
-	     reverse = 0;
-	     buf += 32;
-	     min_length++;
-	     break;
-
-	   case '.':
-	     last = buf;
-	     *buf++ = ANY;
-	     min_length++;
-	     break;
-
-	   case '*':
-	     if (last == NULL) goto literal_char;
-	     *last |= STAR;
-	     min_length--;
-	     last = NULL;
-	     break;
-
-	   case '+':
-	     if (last == NULL) goto literal_char;
-	     *last |= LEAST_ONCE;
-	     last = NULL;
-	     break;
-
-	   case '?':
-	     if (last == NULL) goto literal_char;
-	     *last |= MAYBE_ONCE;
-	     last = NULL;
-	     min_length--;
-	     break;
-
-	   literal_char:
-	   default:
-	     /* This is to keep track of longest substring */
-	     min_length++;
-	     this_max_mm++;
-	     if (last_count + 1 == count)
-	       {
-		  if (this_max_mm == 1)
-		    {
-		       this_mm_p = buf;
-		    }
-		  else if (max_mm < this_max_mm)
-		    {
-		       mm_p = this_mm_p;
-		       max_mm = this_max_mm;
-		    }
-	       }
-	     else
-	       {
-		  this_mm_p = buf;
-		  this_max_mm = 1;
-	       }
-
-	     last_count = count;
-
-	     last = buf;
-	     *buf++ = LITERAL;
-	     *buf++ = UPPERCASE(c);
-	  }
-     }
-   *buf = 0;
-   /* Check for ordinary search */
-   ebuf = buf;
-   buf = reg->buf;
-
-   if (no_osearch) ordinary_search = 0;
-   else
-     {
-	ordinary_search = 1;
-	while (buf < ebuf)
-	  {
-	     if (*buf != LITERAL)
-	       {
-		  ordinary_search = 0;
-		  break;
-	       }
-	     buf += 2;
-	  }
-     }
-
-   reg->osearch = ordinary_search;
-   reg->must_match_str[15] = 0;
-   reg->min_length = (min_length > 0) ? (unsigned int) min_length : 0;
-   if (ordinary_search)
-     {
-	strncpy((char *) reg->must_match_str, (char *) reg->pat, 15);
-	reg->must_match = 1;
-	return(0);
-     }
-   /* check for longest substring of pattern */
-   reg->must_match = 0;
-   if ((mm_p == NULL) && (this_mm_p != NULL)) mm_p = this_mm_p;
-   if (mm_p == NULL)
-     {
-	return (0);
-     }
-   n = 15;
-   pat = reg->must_match_str;
-   buf = mm_p;
-   while (n--)
-     {
-	if (*buf++ != LITERAL) break;
-	*pat++ = *buf++;
-     }
-   *pat = 0;
-   if (pat != reg->must_match_str) reg->must_match = 1;
-   return(0);
-}
-
-char *SLregexp_quote_string (char *re, char *buf, unsigned int buflen)
-{
-   char ch;
-   char *b, *bmax;
-
-   if (re == NULL) return NULL;
-
-   b = buf;
-   bmax = buf + buflen;
-
-   while (b < bmax)
-     {
-	switch (ch = *re++)
-	  {
-	   case 0:
-	     *b = 0;
-	     return buf;
-
-	   case '$':
-	   case '\\':
-	   case '[':
-	   case ']':
-	   case '.':
-	   case '^':
-	   case '*':
-	   case '+':
-	   case '?':
-	     *b++ = '\\';
-	    if (b == bmax) break;
-	     /* drop */
-
-	   default:
-	     *b++ = ch;
-	  }
-     }
-   return NULL;
-}
-
-#if 0
-#define MAX_EXP 4096
-int main(int argc, char **argv)
-{
-   FILE *fp;
-   char *regexp, *file;
-   char expbuf[MAX_EXP], buf[512];
-   SLRegexp_Type reg;
-
-   file = argv[2];
-   regexp = argv[1];
-
-   if (NULL == (fp = fopen(file, "r")))
-     {
-	fprintf(stderr, "File not open\n");
-	return(1);
-     }
-
-   reg.buf = expbuf;
-   reg.buf_len = MAX_EXP;
-   reg.pat = regexp;
-   reg.case_sensitive = 1;
-
-   if (!regexp_compile(&reg)) while (NULL != fgets(buf, 511, fp))
-     {
-	if (reg.osearch)
-	  {
-	     if (NULL == strstr(buf, reg.pat)) continue;
-	  }
-	else
-	  {
-	     if (reg.must_match && (NULL == strstr(buf, reg.must_match_str))) continue;
-	     if (0 == regexp_match(buf, buf + strlen(buf), &reg)) continue;
-	  }
-
-	fputs(buf, stdout);
-     }
-   return (0);
-}
-#endif
diff --git a/mdk-stage1/slang/slrline.c b/mdk-stage1/slang/slrline.c
deleted file mode 100644
index 1874be0bb..000000000
--- a/mdk-stage1/slang/slrline.c
+++ /dev/null
@@ -1,836 +0,0 @@
-/* SLang_read_line interface --- uses SLang tty stuff */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef REAL_UNIX_SYSTEM
-int SLang_RL_EOF_Char = 4;
-#else
-int SLang_RL_EOF_Char = 26;
-#endif
-
-int SLang_Rline_Quit;
-static SLang_RLine_Info_Type *This_RLI;
-
-static unsigned char Char_Widths[256];
-static void position_cursor (int);
-
-static void rl_beep (void)
-{
-   putc(7, stdout);
-   fflush (stdout);
-}
-
-/* editing functions */
-static int rl_bol (void)
-{
-   if (This_RLI->point == 0) return 0;
-   This_RLI->point = 0;
-   return 1;
-}
-
-static int rl_eol (void)
-{
-   if (This_RLI->point == This_RLI->len) return 0;
-   This_RLI->point = This_RLI->len;
-   return 1;
-}
-
-static int rl_right (void)
-{
-   if (This_RLI->point == This_RLI->len) return 0;
-   This_RLI->point++;
-   return 1;
-}
-
-static int rl_left (void)
-{
-   if (This_RLI->point == 0) return 0;
-   This_RLI->point--;
-   return 1;
-}
-
-static int rl_self_insert (void)
-{
-   unsigned char *pmin, *p;
-
-   if (This_RLI->len == This_RLI->buf_len)
-     {
-	rl_beep ();
-	return 0;
-     }
-
-   pmin = This_RLI->buf + This_RLI->point;
-   p = This_RLI->buf + This_RLI->len;
-   while (p > pmin)
-     {
-	*p = *(p - 1);
-	p--;
-     }
-   *pmin = SLang_Last_Key_Char;
-
-   This_RLI->len++;
-   This_RLI->point++;
-   if ((This_RLI->curs_pos + 2 >= This_RLI->edit_width)
-       || (This_RLI->tt_insert == NULL)
-       || (Char_Widths[SLang_Last_Key_Char] != 1)) return 1;
-
-   (*This_RLI->tt_insert)((char) SLang_Last_Key_Char);
-   /* update screen buf */
-   p = This_RLI->old_upd + (This_RLI->len - 1);
-   pmin = This_RLI->old_upd + (This_RLI->point - 1);
-   while (p > pmin)
-     {
-	*p = *(p - 1);
-	p--;
-     }
-   *pmin = SLang_Last_Key_Char;
-   return 0;
-}
-
-int SLang_rline_insert (char *s)
-{
-   unsigned char *pmin, *p;
-   int n;
-
-   n = strlen (s);
-   if (n > This_RLI->buf_len - This_RLI->len)
-     n = This_RLI->buf_len - This_RLI->len;
-
-   if (n == 0) return 0;
-
-   pmin = This_RLI->buf + This_RLI->point;
-   p = This_RLI->buf + (This_RLI->len - 1);
-
-   while (p >= pmin)
-     {
-	*(p + n) = *p;
-	p--;
-     }
-   SLMEMCPY ((char *) pmin, s, n);
-
-   This_RLI->len += n;
-   This_RLI->point += n;
-   return n;
-}
-
-static int rl_deln (int n)
-{
-   unsigned char *pmax, *p;
-
-   p = This_RLI->buf + This_RLI->point;
-   pmax = This_RLI->buf + This_RLI->len;
-
-   if (p + n > pmax) n = (int) (pmax - p);
-   while (p < pmax)
-     {
-	*p = *(p + n);
-	p++;
-     }
-   This_RLI->len -= n;
-   return n;
-}
-
-static int rl_del (void)
-{
-   return rl_deln(1);
-}
-
-static int rl_quote_insert (void)
-{
-   int err = SLang_Error;
-   SLang_Error = 0;
-   SLang_Last_Key_Char = (*This_RLI->getkey)();
-   rl_self_insert ();
-   if (SLang_Error == SL_USER_BREAK) SLang_Error = 0;
-   else SLang_Error = err;
-   return 1;
-}
-
-static int rl_trim (void)
-{
-   unsigned char *p, *pmax, *p1;
-   p = This_RLI->buf + This_RLI->point;
-   pmax = This_RLI->buf + This_RLI->len;
-
-   if (p == pmax)
-     {
-	if (p == This_RLI->buf) return 0;
-	p--;
-     }
-
-   if ((*p != ' ') && (*p != '\t')) return 0;
-   p1 = p;
-   while ((p1 < pmax) && ((*p1 == ' ') || (*p1 == '\t'))) p1++;
-   pmax = p1;
-   p1 = This_RLI->buf;
-
-   while ((p >= p1) && ((*p == ' ') || (*p == '\t'))) p--;
-   if (p == pmax) return 0;
-   p++;
-
-   This_RLI->point = (int) (p - p1);
-   return rl_deln ((int) (pmax - p));
-}
-
-static int rl_bdel (void)
-{
-   if (rl_left()) return rl_del();
-   return 0;
-}
-
-static int rl_deleol (void)
-{
-   if (This_RLI->point == This_RLI->len) return 0;
-   *(This_RLI->buf + This_RLI->point) = 0;
-   This_RLI->len = This_RLI->point;
-   return 1;
-}
-
-static int rl_delete_line (void)
-{
-   This_RLI->point = 0;
-   *(This_RLI->buf + This_RLI->point) = 0;
-   This_RLI->len = 0;
-   return 1;
-}
-
-static int rl_enter (void)
-{
-   *(This_RLI->buf + This_RLI->len) = 0;
-   SLang_Rline_Quit = 1;
-   return 1;
-}
-
-static SLKeyMap_List_Type *RL_Keymap;
-
-/* This update is designed for dumb terminals.  It assumes only that the
- * terminal can backspace via ^H, and move cursor to start of line via ^M.
- * There is a hook so the user can provide a more sophisticated update if
- * necessary.
- */
-
-static void position_cursor (int col)
-{
-   unsigned char *p, *pmax;
-   int dc;
-
-   if (col == This_RLI->curs_pos)
-     {
-	fflush (stdout);
-	return;
-     }
-
-   if (This_RLI->tt_goto_column != NULL)
-     {
-	(*This_RLI->tt_goto_column)(col);
-	This_RLI->curs_pos = col;
-	fflush (stdout);
-	return;
-     }
-
-   dc = This_RLI->curs_pos - col;
-   if (dc < 0)
-     {
-	p = This_RLI->new_upd + This_RLI->curs_pos;
-	pmax = This_RLI->new_upd + col;
-	while (p < pmax) putc((char) *p++, stdout);
-     }
-   else
-     {
-	if (dc < col)
-	  {
-	     while (dc--) putc(8, stdout);
-	  }
-	else
-	  {
-	     putc('\r', stdout);
-	     p = This_RLI->new_upd;
-	     pmax = This_RLI->new_upd + col;
-	     while (p < pmax) putc((char) *p++, stdout);
-	  }
-     }
-   This_RLI->curs_pos = col;
-   fflush (stdout);
-}
-
-static void erase_eol (SLang_RLine_Info_Type *rli)
-{
-   unsigned char *p, *pmax;
-
-   p = rli->old_upd + rli->curs_pos;
-   pmax = rli->old_upd + rli->old_upd_len;
-
-   while (p++ < pmax) putc(' ', stdout);
-
-   rli->curs_pos = rli->old_upd_len;
-}
-
-static unsigned char *spit_out(SLang_RLine_Info_Type *rli, unsigned char *p)
-{
-   unsigned char *pmax;
-   position_cursor ((int) (p - rli->new_upd));
-   pmax = rli->new_upd + rli->new_upd_len;
-   while (p < pmax) putc((char) *p++, stdout);
-   rli->curs_pos = rli->new_upd_len;
-   return pmax;
-}
-
-static void really_update (SLang_RLine_Info_Type *rli, int new_curs_position)
-{
-   unsigned char *b = rli->old_upd, *p = rli->new_upd, chb, chp;
-   unsigned char *pmax;
-
-   if (rli->update_hook != NULL)
-     {
-	(*rli->update_hook)(p, rli->edit_width, new_curs_position);
-     }
-   else
-     {
-	pmax = p + rli->edit_width;
-	while (p < pmax)
-	  {
-	     chb = *b++; chp = *p++;
-	     if (chb == chp) continue;
-
-	     if (rli->old_upd_len <= rli->new_upd_len)
-	       {
-		  /* easy one */
-		  (void) spit_out (rli, p - 1);
-		  break;
-	       }
-	     spit_out(rli, p - 1);
-	     erase_eol (rli);
-	     break;
-	  }
-	position_cursor (new_curs_position);
-     }
-
-   /* update finished, so swap */
-
-   rli->old_upd_len = rli->new_upd_len;
-   p = rli->old_upd;
-   rli->old_upd = rli->new_upd;
-   rli->new_upd = p;
-}
-
-static void RLupdate (SLang_RLine_Info_Type *rli)
-{
-   int len, dlen, start_len = 0, prompt_len = 0, tw = 0, count;
-   int want_cursor_pos;
-   unsigned char *b, chb, *b_point, *p;
-   int no_echo;
-
-   no_echo = rli->flags & SL_RLINE_NO_ECHO;
-
-   b_point = (unsigned char *) (rli->buf + rli->point);
-   *(rli->buf + rli->len) = 0;
-
-   /* expand characters for output buffer --- handle prompt first.
-    * Do two passes --- first to find out where to begin upon horiz
-    * scroll and the second to actually fill the buffer. */
-   len = 0;
-   count = 2;			       /* once for prompt and once for buf */
-
-   b = (unsigned char *) rli->prompt;
-   while (count--)
-     {
-	if ((count == 0) && no_echo)
-	  break;
-
-	/* The prompt could be NULL */
-	if (b != NULL) while ((chb = *b) != 0)
-	  {
-	     /* This will ensure that the screen is scrolled a third of the edit
-	      * width each time */
-	     if (b_point == b) break;
-	     dlen = Char_Widths[chb];
-	     if ((chb == '\t') && tw)
-	       {
-		  dlen = tw * ((len - prompt_len) / tw + 1) - (len - prompt_len);
-	       }
-	     len += dlen;
-	     b++;
-	  }
-	tw = rli->tab;
-	b = (unsigned char *) rli->buf;
-	if (count == 1) want_cursor_pos = prompt_len = len;
-     }
-
-   if (len < rli->edit_width - rli->dhscroll) start_len = 0;
-   else if ((rli->start_column > len)
-	    || (rli->start_column + rli->edit_width <= len))
-     {
-	start_len = len - (rli->edit_width - rli->dhscroll);
-	if (start_len < 0) start_len = 0;
-     }
-   else start_len = rli->start_column;
-   rli->start_column = start_len;
-
-   want_cursor_pos = len - start_len;
-
-   /* second pass */
-   p = rli->new_upd;
-
-   len = 0;
-   count = 2;
-   b = (unsigned char *) rli->prompt;
-   if (b == NULL) b = (unsigned char *) "";
-
-   while ((len < start_len) && (*b))
-     {
-	len += Char_Widths[*b++];
-     }
-
-   tw = 0;
-   if (*b == 0)
-     {
-	b = (unsigned char *) rli->buf;
-	while (len < start_len)
-	  {
-	     len += Char_Widths[*b++];
-	  }
-	tw = rli->tab;
-	count--;
-     }
-
-   len = 0;
-   while (count--)
-     {
-	if ((count == 0) && (no_echo))
-	  break;
-
-	while ((len < rli->edit_width) && ((chb = *b++) != 0))
-	  {
-	     dlen = Char_Widths[chb];
-	     if (dlen == 1) *p++ = chb;
-	     else
-	       {
-		  if ((chb == '\t') && tw)
-		    {
-		       dlen = tw * ((len + start_len - prompt_len) / tw + 1) - (len + start_len - prompt_len);
-		       len += dlen;	       /* ok since dlen comes out 0  */
-		       if (len > rli->edit_width) dlen = len - rli->edit_width;
-		       while (dlen--) *p++ = ' ';
-		       dlen = 0;
-		    }
-		  else
-		    {
-		       if (dlen == 3)
-			 {
-			    chb &= 0x7F;
-			    *p++ = '~';
-			 }
-
-		       *p++ = '^';
-		       if (chb == 127)  *p++ = '?';
-		       else *p++ = chb + '@';
-		    }
-	       }
-	     len += dlen;
-	  }
-	/* if (start_len > prompt_len) break; */
-	tw = rli->tab;
-	b = (unsigned char *) rli->buf;
-     }
-
-   rli->new_upd_len = (int) (p - rli->new_upd);
-   while (p < rli->new_upd + rli->edit_width) *p++ = ' ';
-   really_update (rli, want_cursor_pos);
-}
-
-void SLrline_redraw (SLang_RLine_Info_Type *rli)
-{
-   unsigned char *p = rli->new_upd;
-   unsigned char *pmax = p + rli->edit_width;
-   while (p < pmax) *p++ = ' ';
-   rli->new_upd_len = rli->edit_width;
-   really_update (rli, 0);
-   RLupdate (rli);
-}
-
-static int rl_eof_insert (void)
-{
-   if (This_RLI->len == 0)
-     {
-	SLang_Last_Key_Char = SLang_RL_EOF_Char;
-	/* rl_self_insert (); */
-	return rl_enter ();
-     }
-   return 0;
-}
-
-/* This is very naive.  It knows very little about nesting and nothing
- * about quoting.
- */
-static void blink_match (SLang_RLine_Info_Type *rli)
-{
-   unsigned char bra, ket;
-   unsigned int delta_column;
-   unsigned char *p, *pmin;
-   int dq_level, sq_level;
-   int level;
-
-   pmin = rli->buf;
-   p = pmin + rli->point;
-   if (pmin == p)
-     return;
-
-   ket = SLang_Last_Key_Char;
-   switch (ket)
-     {
-      case ')':
-	bra = '(';
-	break;
-      case ']':
-	bra = '[';
-	break;
-      case '}':
-	bra = '{';
-	break;
-      default:
-	return;
-     }
-
-   level = 0;
-   sq_level = dq_level = 0;
-
-   delta_column = 0;
-   while (p > pmin)
-     {
-	char ch;
-
-	p--;
-	delta_column++;
-	ch = *p;
-
-	if (ch == ket)
-	  {
-	     if ((dq_level == 0) && (sq_level == 0))
-	       level++;
-	  }
-	else if (ch == bra)
-	  {
-	     if ((dq_level != 0) || (sq_level != 0))
-	       continue;
-
-	     level--;
-	     if (level == 0)
-	       {
-		  rli->point -= delta_column;
-		  RLupdate (rli);
-		  (*rli->input_pending)(10);
-		  rli->point += delta_column;
-		  RLupdate (rli);
-		  break;
-	       }
-	     if (level < 0)
-	       break;
-	  }
-	else if (ch == '"') dq_level = !dq_level;
-	else if (ch == '\'') sq_level = !sq_level;
-     }
-}
-
-int SLang_read_line (SLang_RLine_Info_Type *rli)
-{
-   unsigned char *p, *pmax;
-   SLang_Key_Type *key;
-
-   SLang_Rline_Quit = 0;
-   This_RLI = rli;
-   p = rli->old_upd; pmax = p + rli->edit_width;
-   while (p < pmax) *p++ = ' ';
-
-   /* Sanity checking */
-   rli->len = strlen ((char *) rli->buf);
-   if (rli->len >= rli->buf_len)
-     {
-	rli->len = 0;
-	*rli->buf = 0;
-     }
-   if (rli->point > rli->len) rli->point = rli->len;
-   if (rli->point < 0) rli->point = 0;
-
-   rli->curs_pos = rli->start_column = 0;
-   rli->new_upd_len = rli->old_upd_len = 0;
-
-   This_RLI->last_fun = NULL;
-   if (rli->update_hook == NULL)
-     putc ('\r', stdout);
-
-   RLupdate (rli);
-
-   while (1)
-     {
-	key = SLang_do_key (RL_Keymap, (int (*)(void)) rli->getkey);
-
-	if ((key == NULL) || (key->f.f == NULL))
-	  rl_beep ();
-	else
-	  {
-	     if ((SLang_Last_Key_Char == SLang_RL_EOF_Char)
-		 && (*key->str == 2)
-		 && (This_RLI->len == 0))
-	       rl_eof_insert ();
-	     else if (key->type == SLKEY_F_INTRINSIC)
-	       {
-		  if ((key->f.f)())
-		    RLupdate (rli);
-
-		  if ((rli->flags & SL_RLINE_BLINK_MATCH)
-		      && (rli->input_pending != NULL))
-		    blink_match (rli);
-	       }
-
-	     if (SLang_Rline_Quit)
-	       {
-		  This_RLI->buf[This_RLI->len] = 0;
-		  if (SLang_Error == SL_USER_BREAK)
-		    {
-		       SLang_Error = 0;
-		       return -1;
-		    }
-		  return This_RLI->len;
-	       }
-	  }
-	if (key != NULL)
-	  This_RLI->last_fun = key->f.f;
-     }
-}
-
-static int rl_abort (void)
-{
-   rl_delete_line ();
-   return rl_enter ();
-}
-
-/* TTY interface --- ANSI */
-
-static void ansi_goto_column (int n)
-{
-   putc('\r', stdout);
-   if (n) fprintf(stdout, "\033[%dC", n);
-}
-
-static void rl_select_line (SLang_Read_Line_Type *p)
-{
-   This_RLI->last = p;
-   strcpy ((char *) This_RLI->buf, (char *) p->buf);
-   This_RLI->point = This_RLI->len = strlen((char *) p->buf);
-}
-static int rl_next_line (void);
-static int rl_prev_line (void)
-{
-   SLang_Read_Line_Type *prev;
-
-   if (((This_RLI->last_fun != (FVOID_STAR) rl_prev_line)
-	&& (This_RLI->last_fun != (FVOID_STAR) rl_next_line))
-       || (This_RLI->last == NULL))
-     {
-	prev = This_RLI->tail;
-     }
-   else prev = This_RLI->last->prev;
-
-   if (prev == NULL)
-     {
-	rl_beep ();
-	return 0;
-     }
-
-   rl_select_line (prev);
-   return 1;
-}
-static int rl_redraw (void)
-{
-   SLrline_redraw (This_RLI);
-   return 1;
-}
-
-static int rl_next_line (void)
-{
-   SLang_Read_Line_Type *next;
-
-   if (((This_RLI->last_fun != (FVOID_STAR) rl_prev_line)
-	&& (This_RLI->last_fun != (FVOID_STAR) rl_next_line))
-       || (This_RLI->last == NULL))
-      {
-	 rl_beep ();
-	 return 0;
-      }
-
-   next = This_RLI->last->next;
-
-   if (next == NULL)
-     {
-	This_RLI->len = This_RLI->point = 0;
-	*This_RLI->buf = 0;
-	This_RLI->last = NULL;
-     }
-   else rl_select_line (next);
-   return 1;
-}
-
-static SLKeymap_Function_Type SLReadLine_Functions[] =
-{
-   {"up", rl_prev_line},
-   {"down", rl_next_line},
-   {"bol", rl_bol},
-   {"eol", rl_eol},
-   {"right", rl_right},
-   {"left", rl_left},
-   {"self_insert", rl_self_insert},
-   {"bdel", rl_bdel},
-   {"del", rl_del},
-   {"deleol", rl_deleol},
-   {"enter", rl_enter},
-   {"trim", rl_trim},
-   {"quoted_insert", rl_quote_insert},
-   {(char *) NULL, NULL}
-};
-
-int SLang_init_readline (SLang_RLine_Info_Type *rli)
-{
-   int ch;
-   char simple[2];
-
-   if (RL_Keymap == NULL)
-     {
-	simple[1] = 0;
-	if (NULL == (RL_Keymap = SLang_create_keymap ("ReadLine", NULL)))
-	  return -1;
-
-	RL_Keymap->functions = SLReadLine_Functions;
-
-	/* This breaks under some DEC ALPHA compilers (scary!) */
-#ifndef __DECC
-	for (ch = ' '; ch < 256; ch++)
-	  {
-	     simple[0] = (char) ch;
-	     SLkm_define_key (simple, (FVOID_STAR) rl_self_insert, RL_Keymap);
-	  }
-#else
-	ch = ' ';
-	while (1)
-	  {
-	     simple[0] = (char) ch;
-	     SLkm_define_key (simple, (FVOID_STAR) rl_self_insert, RL_Keymap);
-	     ch = ch + 1;
-	     if (ch == 256) break;
-	  }
-#endif				       /* NOT __DECC */
-
-	simple[0] = SLang_Abort_Char;
-	SLkm_define_key (simple, (FVOID_STAR) rl_abort, RL_Keymap);
-	simple[0] = SLang_RL_EOF_Char;
-	SLkm_define_key (simple, (FVOID_STAR) rl_eof_insert, RL_Keymap);
-
-#ifndef IBMPC_SYSTEM
-	SLkm_define_key  ("^[[A", (FVOID_STAR) rl_prev_line, RL_Keymap);
-	SLkm_define_key  ("^[[B", (FVOID_STAR) rl_next_line, RL_Keymap);
-	SLkm_define_key  ("^[[C", (FVOID_STAR) rl_right, RL_Keymap);
-	SLkm_define_key  ("^[[D", (FVOID_STAR) rl_left, RL_Keymap);
-	SLkm_define_key  ("^[OA", (FVOID_STAR) rl_prev_line, RL_Keymap);
-	SLkm_define_key  ("^[OB", (FVOID_STAR) rl_next_line, RL_Keymap);
-	SLkm_define_key  ("^[OC", (FVOID_STAR) rl_right, RL_Keymap);
-	SLkm_define_key  ("^[OD", (FVOID_STAR) rl_left, RL_Keymap);
-#else
-	SLkm_define_key  ("^@H", (FVOID_STAR) rl_prev_line, RL_Keymap);
-	SLkm_define_key  ("^@P", (FVOID_STAR) rl_next_line, RL_Keymap);
-	SLkm_define_key  ("^@M", (FVOID_STAR) rl_right, RL_Keymap);
-	SLkm_define_key  ("^@K", (FVOID_STAR) rl_left, RL_Keymap);
-	SLkm_define_key  ("^@S", (FVOID_STAR) rl_del, RL_Keymap);
-	SLkm_define_key  ("^@O", (FVOID_STAR) rl_eol, RL_Keymap);
-	SLkm_define_key  ("^@G", (FVOID_STAR) rl_bol, RL_Keymap);
-
-	SLkm_define_key  ("\xE0H", (FVOID_STAR) rl_prev_line, RL_Keymap);
-	SLkm_define_key  ("\xE0P", (FVOID_STAR) rl_next_line, RL_Keymap);
-	SLkm_define_key  ("\xE0M", (FVOID_STAR) rl_right, RL_Keymap);
-	SLkm_define_key  ("\xE0K", (FVOID_STAR) rl_left, RL_Keymap);
-	SLkm_define_key  ("\xE0S", (FVOID_STAR) rl_del, RL_Keymap);
-	SLkm_define_key  ("\xE0O", (FVOID_STAR) rl_eol, RL_Keymap);
-	SLkm_define_key  ("\xE0G", (FVOID_STAR) rl_bol, RL_Keymap);
-#endif
-	SLkm_define_key  ("^C", (FVOID_STAR) rl_abort, RL_Keymap);
-	SLkm_define_key  ("^E", (FVOID_STAR) rl_eol, RL_Keymap);
-	SLkm_define_key  ("^G", (FVOID_STAR) rl_abort, RL_Keymap);
-	SLkm_define_key  ("^I", (FVOID_STAR) rl_self_insert, RL_Keymap);
-	SLkm_define_key  ("^A", (FVOID_STAR) rl_bol, RL_Keymap);
-	SLkm_define_key  ("\r", (FVOID_STAR) rl_enter, RL_Keymap);
-	SLkm_define_key  ("\n", (FVOID_STAR) rl_enter, RL_Keymap);
-	SLkm_define_key  ("^K", (FVOID_STAR) rl_deleol, RL_Keymap);
-	SLkm_define_key  ("^L", (FVOID_STAR) rl_deleol, RL_Keymap);
-	SLkm_define_key  ("^V", (FVOID_STAR) rl_del, RL_Keymap);
-	SLkm_define_key  ("^D", (FVOID_STAR) rl_del, RL_Keymap);
-	SLkm_define_key  ("^F", (FVOID_STAR) rl_right, RL_Keymap);
-	SLkm_define_key  ("^B", (FVOID_STAR) rl_left, RL_Keymap);
-	SLkm_define_key  ("^?", (FVOID_STAR) rl_bdel, RL_Keymap);
-	SLkm_define_key  ("^H", (FVOID_STAR) rl_bdel, RL_Keymap);
-	SLkm_define_key  ("^P", (FVOID_STAR) rl_prev_line, RL_Keymap);
-	SLkm_define_key  ("^N", (FVOID_STAR) rl_next_line, RL_Keymap);
-	SLkm_define_key  ("^R", (FVOID_STAR) rl_redraw, RL_Keymap);
-	SLkm_define_key  ("`", (FVOID_STAR) rl_quote_insert, RL_Keymap);
-	SLkm_define_key  ("\033\\", (FVOID_STAR) rl_trim, RL_Keymap);
-	if (SLang_Error) return -1;
-     }
-
-   if (rli->prompt == NULL) rli->prompt = "";
-   if (rli->keymap == NULL) rli->keymap = RL_Keymap;
-   rli->old_upd = rli->upd_buf1;
-   rli->new_upd = rli->upd_buf2;
-   *rli->buf = 0;
-   rli->point = 0;
-
-   if (rli->flags & SL_RLINE_USE_ANSI)
-     {
-	if (rli->tt_goto_column == NULL) rli->tt_goto_column = ansi_goto_column;
-     }
-
-   if (Char_Widths[0] == 2) return 0;
-
-   for (ch = 0; ch < 32; ch++) Char_Widths[ch] = 2;
-   for (ch = 32; ch < 256; ch++) Char_Widths[ch] = 1;
-   Char_Widths[127] = 2;
-#ifndef IBMPC_SYSTEM
-   for (ch = 128; ch < 160; ch++) Char_Widths[ch] = 3;
-#endif
-
-   return 0;
-}
-
-SLang_Read_Line_Type *SLang_rline_save_line (SLang_RLine_Info_Type *rli)
-{
-   SLang_Read_Line_Type *rl = NULL;
-   unsigned char *buf;
-
-   if ((rli == NULL) || (rli->buf == NULL))
-     return NULL;
-
-   if (NULL == (rl = (SLang_Read_Line_Type *) SLmalloc (sizeof (SLang_Read_Line_Type)))
-       || (NULL == (buf = (unsigned char *) SLmake_string ((char *)rli->buf))))
-     {
-	SLfree ((char *)rl);
-	return NULL;
-     }
-   rl->buf = buf;
-   rl->buf_len = strlen ((char *)buf);
-   rl->num = rl->misc = 0;
-   rl->next = rl->prev = NULL;
-
-   if (rli->tail != NULL)
-     {
-	rli->tail->next = rl;
-	rl->prev = rli->tail;
-     }
-   rli->tail = rl;
-
-   return rl;
-}
diff --git a/mdk-stage1/slang/slscanf.c b/mdk-stage1/slang/slscanf.c
deleted file mode 100644
index 5bd93ff41..000000000
--- a/mdk-stage1/slang/slscanf.c
+++ /dev/null
@@ -1,718 +0,0 @@
-/* sscanf function for S-Lang */
-/* Copyright (c) 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-#include <ctype.h>
-#include <math.h>
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-static char *skip_whitespace (char *s)
-{
-   while (isspace (*s))
-     s++;
-   
-   return s;
-}
-
-static void init_map (unsigned char map[256], int base)
-{
-   memset ((char *) map, 0xFF, 256);
-   
-   map['0'] = 0;   map['1'] = 1;   map['2'] = 2;   map['3'] = 3;
-   map['4'] = 4;   map['5'] = 5;   map['6'] = 6;   map['7'] = 7;
-   if (base == 8)
-     return;
-
-   map['8'] = 8;   map['9'] = 9;
-   if (base == 10)
-     return;
-
-   map['A'] = 10;   map['B'] = 11;   map['C'] = 12;   map['D'] = 13;
-   map['E'] = 14;   map['F'] = 15;   map['a'] = 10;   map['b'] = 11;
-   map['c'] = 12;   map['d'] = 13;   map['e'] = 14;   map['f'] = 15;
-}
-
-static char *get_sign (char *s, char *smax, int *sign)
-{
-   *sign = 1;
-   if (s + 1 < smax)
-     {
-	if (*s == '+') s++;
-	else if (*s == '-')
-	  {
-	     s++;
-	     *sign = -1;
-	  }
-     }
-   return s;
-}
-
-
-static int parse_long (char **sp, char *smax, long *np,
-		       long base, unsigned char map[256])
-{
-   char *s, *s0;
-   long n;
-   int sign;
-
-   s = s0 = get_sign (*sp, smax, &sign);
-
-   n = 0;
-   while (s < smax)
-     {
-	unsigned char value;
-
-	value = map [(unsigned char) *s];
-	if (value == 0xFF)
-	  break;
-
-	n = base * n + value;
-	s++;
-     }
-
-   *sp = s;
-   if (s == s0)
-     return 0;
-
-   *np = n * sign;
-
-   return 1;
-}
-
-
-static int parse_int (char **sp, char *smax, int *np,
-		      long base, unsigned char map[256])
-{
-   long n;
-   int status;
-
-   if (1 == (status = parse_long (sp, smax, &n, base, map)))
-     *np = (int) n;
-   return status;
-}
-
-static int parse_short (char **sp, char *smax, short *np,
-			long base, unsigned char map[256])
-{
-   long n;
-   int status;
-
-   if (1 == (status = parse_long (sp, smax, &n, base, map)))
-     *np = (short) n;
-   return status;
-}
-
-static int parse_ulong (char **sp, char *smax, unsigned long *np,
-			long base, unsigned char map[256])
-{
-   return parse_long (sp, smax, (long *) np, base, map);
-}
-
-static int parse_uint (char **sp, char *smax, unsigned int *np,
-		       long base, unsigned char map[256])
-{
-   return parse_int (sp, smax, (int *) np, base, map);
-}
-
-static int parse_ushort (char **sp, char *smax, unsigned short *np,
-			 long base, unsigned char map[256])
-{
-   return parse_short (sp, smax, (short *) np, base, map);
-}
-
-#if SLANG_HAS_FLOAT
-/* 
- * In an ideal world, strtod would be the correct function to use.  However,
- * there may be problems relying on this function because some systems do
- * not support and some that do get it wrong.  So, I will handle the parsing
- * of the string and let atof or strtod handle the arithmetic.
- */
-static int parse_double (char **sp, char *smax, double *d)
-{
-   char *s, *s0;
-   int sign;
-   int expon;
-   unsigned char map[256];
-   char buf[128];
-   int has_leading_zeros;
-   char *start_pos, *sign_pos;
-   char *b, *bmax;
-
-   start_pos = *sp;
-   s = get_sign (start_pos, smax, &sign);
-   if (s >= smax)
-     {
-	errno = _SLerrno_errno = EINVAL;
-	return 0;
-     }
-
-   /* Prepare the buffer that will be passed to strtod */
-   /* Allow the exponent to be 5 significant digits: E+xxxxx\0 */
-   bmax = buf + (sizeof (buf) - 8);
-   buf[0] = '0'; buf[1] = '.';
-   b = buf + 2;
-
-   init_map (map, 10);
-
-   /* Skip leading 0s */
-   s0 = s;
-   while ((s < smax) && (*s == '0'))
-     s++;
-   has_leading_zeros = (s != s0);
-
-   expon = 0;
-   while (s < smax)
-     {
-	unsigned char value = map [(unsigned char) *s];
-
-	if (value == 0xFF)
-	  break;
-	
-	if (b < bmax)
-	  *b++ = *s;
-	
-	expon++;
-	s++;
-     }
-   
-   if ((s < smax) && (*s == '.'))
-     {
-	s++;
-	if (b == buf + 2)	       /* nothing added yet */
-	  {
-	     while ((s < smax) && (*s == '0'))
-	       {
-		  expon--;
-		  s++;
-	       }
-	  }
-
-	while (s < smax)
-	  {
-	     unsigned char value = map [(unsigned char) *s];
-
-	     if (value == 0xFF)
-	       break;
-	     
-	     if (b < bmax)
-	       *b++ = *s;
-	     s++;
-	  }
-     }
-
-   if ((b == buf + 2)
-       && (has_leading_zeros == 0))
-     {
-	*sp = start_pos;
-	errno = EINVAL;
-	return 0;
-     }
-
-   if ((s + 1 < smax) && ((*s == 'E') || (*s == 'e')))
-     {
-	int e;
-	int esign;
-
-	s0 = s;
-	s = get_sign (s + 1, smax, &esign);
-	sign_pos = s;
-	e = 0;
-	while (s < smax)
-	  {
-	     unsigned char value = map [(unsigned char) *s];
-	     if (value == 0xFF)
-	       break;
-	     if (e < 25000)	       /* avoid overflow if 16 bit */
-	       e = 10 * e + value;
-	     s++;
-	  }
-#ifdef ERANGE
-	if (e >= 25000)
-	  errno = ERANGE;
-#endif
-	if (s == sign_pos)
-	  s = s0;		       /* ...E-X */
-	else
-	  {
-	     e = esign * e;
-	     expon += e;
-	  }
-     }
-   
-   if (expon != 0)
-     sprintf (b, "e%d", expon);
-   else
-     *b = 0;
-   
-   *sp = s;
-#if HAVE_STRTOD
-   *d = sign * strtod (buf, NULL);
-#else
-   *d = sign * atof (buf);
-#endif
-   return 1;
-}
-
-static int parse_float (char **sp, char *smax, float *d)
-{
-   double x;
-   if (1 == parse_double (sp, smax, &x))
-     {
-	*d = (float) x;
-	return 1;
-     }
-   return 0;
-}
-#endif				       /* SLANG_HAS_FLOAT */
-
-static int parse_string (char **sp, char *smax, char **str)
-{
-   char *s, *s0;
-   
-   s0 = s = *sp;
-   while (s < smax)
-     {
-	if (isspace (*s))
-	  break;
-	s++;
-     }
-   if (NULL == (*str = SLang_create_nslstring (s0, (unsigned int) (s - s0))))
-     return -1;
-   
-   *sp = s;
-   return 1;
-}
-
-static int parse_bstring (char **sp, char *smax, char **str)
-{
-   char *s;
-   
-   s = *sp;
-   if (NULL == (*str = SLang_create_nslstring (s, (unsigned int) (smax - s))))
-     return -1;
-   
-   *sp = smax;
-   return 1;
-}
-
-static int parse_range (char **sp, char *smax, char **fp, char **str)
-{
-   char *s, *s0;
-   char *range;
-   char *f;
-   unsigned char map[256];
-   unsigned char reverse;
-
-   /* How can one represent a range with just '^'?  The naive answer is
-    * is [^].  However, this may be interpreted as meaning any character
-    * but ']' and others.  Let's assume that the user will not use a range
-    * to match '^'.
-    */
-   f = *fp;
-   /* f is a pointer to (one char after) [...]. */
-   if (*f == '^')
-     {
-	f++;
-	reverse = 1;
-     }
-   else reverse = 0;
-
-   s0 = f;
-   if (*f == ']')
-     f++;
-
-   while (1)
-     {
-	char ch = *f;
-
-	if (ch == 0)
-	  {
-	     SLang_verror (SL_INVALID_PARM, "Unexpected end of range in format");
-	     return -1;
-	  }
-	if (ch == ']')
-	  break;
-	f++;
-     }
-   if (NULL == (range = SLmake_nstring (s0, (unsigned int) (f - s0))))
-     return -1;
-   *fp = f + 1;			       /* skip ] */
-   
-   SLmake_lut (map, (unsigned char *) range, reverse);
-   SLfree (range);
-
-   s0 = s = *sp;
-   while ((s < smax) && map [(unsigned char) *s])
-     s++;
-   
-   if (NULL == (*str = SLang_create_nslstring (s0, (unsigned int) (s - s0))))
-     return -1;
-   
-   *sp = s;
-   return 1;
-}
-
-  
-int _SLang_sscanf (void)
-{
-   int num;
-   unsigned int num_refs;
-   char *format;
-   char *input_string, *input_string_max;
-   char *f, *s;
-   unsigned char map8[256], map10[256], map16[256];
-
-   if (SLang_Num_Function_Args < 2)
-     {
-	SLang_verror (SL_INVALID_PARM, "Int_Type sscanf (str, format, ...)");
-	return -1;
-     }
-   
-   num_refs = (unsigned int) SLang_Num_Function_Args;
-   if (-1 == SLreverse_stack (num_refs))
-     return -1;
-   num_refs -= 2;
-
-   if (-1 == SLang_pop_slstring (&input_string))
-     return -1;
-
-   if (-1 == SLang_pop_slstring (&format))
-     {
-	SLang_free_slstring (input_string);
-	return -1;
-     }
-   
-   f = format;
-   s = input_string;
-   input_string_max = input_string + strlen (input_string);
-
-   init_map (map8, 8);
-   init_map (map10, 10);
-   init_map (map16, 16);
-
-   num = 0;
-
-   while (num_refs != 0)
-     {
-	SLang_Object_Type obj;
-	SLang_Ref_Type *ref;
-	char *smax;
-	unsigned char *map;
-	int base;
-	int no_assign;
-	int is_short;
-	int is_long;
-	int status;
-	char chf;
-	unsigned int width;
-	int has_width;
-
-	chf = *f++;
-
-	if (chf == 0)
-	  {
-	     /* Hmmm....  what is the most useful thing to do?? */
-#if 1
-	     break;
-#else
-	     SLang_verror (SL_INVALID_PARM, "sscanf: format not big enough for output list");
-	     goto return_error;
-#endif
-	  }
-
-	if (isspace (chf))
-	  {
-	     s = skip_whitespace (s);
-	     continue;
-	  }
-	
-	if ((chf != '%')
-	    || ((chf = *f++) == '%'))
-	  {
-	     if (*s != chf)
-	       break;
-	     s++;
-	     continue;
-	  }
-
-	no_assign = 0;
-	is_short = 0;
-	is_long = 0;
-	width = 0;
-	smax = input_string_max;
-
-	/* Look for the flag character */
-	if (chf == '*')
-	  {
-	     no_assign = 1;
-	     chf = *f++;
-	  }
-	
-	/* Width */
-	has_width = isdigit (chf);
-	if (has_width)
-	  {
-	     f--;
-	     (void) parse_uint (&f, f + strlen(f), &width, 10, map10);
-	     chf = *f++;
-	  }
-
-	/* Now the type modifier */
-	switch (chf)
-	  {
-	   case 'h':
-	     is_short = 1;
-	     chf = *f++;
-	     break;
-	     
-	   case 'L':		       /* not implemented */
-	   case 'l':
-	     is_long = 1;
-	     chf = *f++;
-	     break;
-	  }
-
-	status = -1;
-
-	if ((chf != 'c') && (chf != '['))
-	  s = skip_whitespace (s);
-
-	if (has_width)
-	  {
-	     if (width > (unsigned int) (input_string_max - s))
-	       width = (unsigned int) (input_string_max - s);
-	     smax = s + width;
-	  }
-	     
-	/* Now the format descriptor */
-
-	map = map10;
-	base = 10;
-
-	try_again:		       /* used by i, x, and o, conversions */
-	switch (chf)
-	  {
-	   case 0:
-	     SLang_verror (SL_INVALID_PARM, "sscanf: Unexpected end of format");
-	     goto return_error;
-	   case 'D':
-	     is_long = 1;
-	   case 'd':
-	     if (is_short)
-	       {
-		  obj.data_type = SLANG_SHORT_TYPE;
-		  status = parse_short (&s, smax, &obj.v.short_val, base, map);
-	       }
-	     else if (is_long)
-	       {
-		  obj.data_type = SLANG_LONG_TYPE;
-		  status = parse_long (&s, smax, &obj.v.long_val, base, map);
-	       }
-	     else
-	       {
-		  obj.data_type = SLANG_INT_TYPE;
-		  status = parse_int (&s, smax, &obj.v.int_val, base, map);
-	       }
-	     break;
-	     
-
-	   case 'U':
-	     is_long = 1;
-	   case 'u':
-	     if (is_short)
-	       {
-		  obj.data_type = SLANG_USHORT_TYPE;
-		  status = parse_ushort (&s, smax, &obj.v.ushort_val, base, map);
-	       }
-	     else if (is_long)
-	       {
-		  obj.data_type = SLANG_ULONG_TYPE;
-		  status = parse_ulong (&s, smax, &obj.v.ulong_val, base, map);
-	       }
-	     else
-	       {
-		  obj.data_type = SLANG_INT_TYPE;
-		  status = parse_uint (&s, smax, &obj.v.uint_val, base, map);
-	       }
-	     break;
-
-	   case 'I':
-	     is_long = 1;
-	   case 'i':
-	     if ((s + 1 >= smax)
-		 || (*s != 0))
-	       chf = 'd';
-	     else if (((s[1] == 'x') || (s[1] == 'X'))
-		      && (s + 2 < smax))
-	       {
-		  s += 2;
-		  chf = 'x';
-	       }
-	     else chf = 'o';
-	     goto try_again;
-	     
-	   case 'O':
-	     is_long = 1;
-	   case 'o':
-	     map = map8;
-	     base = 8;
-	     chf = 'd';
-	     goto try_again;
-	     
-	   case 'X':
-	     is_long = 1;
-	   case 'x':
-	     base = 16;
-	     map = map16;
-	     chf = 'd';
-	     goto try_again;
-
-	   case 'E':
-	   case 'F':
-	     is_long = 1;
-	   case 'e':
-	   case 'f':
-	   case 'g':
-#if SLANG_HAS_FLOAT
-	     if (is_long)
-	       {
-		  obj.data_type = SLANG_DOUBLE_TYPE;
-		  status = parse_double (&s, smax, &obj.v.double_val);
-	       }
-	     else
-	       {
-		  obj.data_type = SLANG_FLOAT_TYPE;
-		  status = parse_float (&s, smax, &obj.v.float_val);
-	       }
-#else
-	     SLang_verror (SL_NOT_IMPLEMENTED,
-			   "This version of the S-Lang does not support floating point");
-	     status = -1;
-#endif
-	     break;
-		  
-	   case 's':
-	     obj.data_type = SLANG_STRING_TYPE;
-	     status = parse_string (&s, smax, &obj.v.s_val);
-	     break;
-	     
-	   case 'c':
-	     if (has_width == 0)
-	       {
-		  obj.data_type = SLANG_UCHAR_TYPE;
-		  obj.v.uchar_val = *s++;
-		  status = 1;
-		  break;
-	       }
-	     obj.data_type = SLANG_STRING_TYPE;
-	     status = parse_bstring (&s, smax, &obj.v.s_val);
-	     break;
-	     
-	   case '[':
-	     obj.data_type = SLANG_STRING_TYPE;
-	     status = parse_range (&s, smax, &f, &obj.v.s_val);
-	     break;
-	     
-	   case 'n':
-	     obj.data_type = SLANG_UINT_TYPE;
-	     obj.v.uint_val = (unsigned int) (s - input_string);
-	     status = 1;
-	     break;
-	     
-	   default:
-	     status = -1;
-	     SLang_verror (SL_NOT_IMPLEMENTED, "format specifier '%c' is not supported", chf);
-	     break;
-	  }
-	
-	if (status == 0)
-	  break;
-
-	if (status == -1)
-	  goto return_error;
-
-	if (no_assign)
-	  {
-	     SLang_free_object (&obj);
-	     continue;
-	  }
-
-	if (-1 == SLang_pop_ref (&ref))
-	  {
-	     SLang_free_object (&obj);
-	     goto return_error;
-	  }
-	
-	if (-1 == SLang_push (&obj))
-	  {
-	     SLang_free_object (&obj);
-	     SLang_free_ref (ref);
-	     goto return_error;
-	  }
-	
-	if (-1 == _SLang_deref_assign (ref))
-	  {
-	     SLang_free_ref (ref);
-	     goto return_error;
-	  }
-	SLang_free_ref (ref);
-
-	num++;
-	num_refs--;
-     }
-
-   if (-1 == SLdo_pop_n (num_refs))
-     goto return_error;
-   
-   SLang_free_slstring (format);
-   SLang_free_slstring (input_string);
-   return num;
-
-   return_error:
-   /* NULLS ok */
-   SLang_free_slstring (format);
-   SLang_free_slstring (input_string);
-   return -1;
-}
-
-   
-# if SLANG_HAS_FLOAT
-
-#ifndef HAVE_STDLIB_H
-/* Oh dear.  Where is the prototype for atof?  If not in stdlib, then
- * I do not know where.  Not in math.h on some systems either.
- */
-extern double atof ();
-#endif
-
-double _SLang_atof (char *s)
-{
-   double x;
-
-   s = skip_whitespace (s);
-   errno = 0;
-
-   if (1 != parse_double (&s, s + strlen (s), &x))
-     {
-	if ((0 == strcmp ("NaN", s))
-	    || (0 == strcmp ("-Inf", s))
-	    || (0 == strcmp ("Inf", s)))
-	  return atof (s);	       /* let this deal with it */
-#ifdef EINVAL
-	errno = _SLerrno_errno = EINVAL;
-#endif
-	return 0.0;
-     }
-   if (errno) 
-     _SLerrno_errno = errno;
-   return x;
-}
-#endif
diff --git a/mdk-stage1/slang/slscroll.c b/mdk-stage1/slang/slscroll.c
deleted file mode 100644
index 358296116..000000000
--- a/mdk-stage1/slang/slscroll.c
+++ /dev/null
@@ -1,450 +0,0 @@
-/* SLang Scrolling Window Routines */
-/* Copyright (c) 1996, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static void find_window_bottom (SLscroll_Window_Type *win)
-{
-   unsigned int nrows;
-   unsigned int hidden_mask;
-   SLscroll_Type *bot, *cline, *last_bot;
-   unsigned int row;
-
-   nrows = win->nrows;
-   hidden_mask = win->hidden_mask;
-   cline = win->current_line;
-
-   win->window_row = row = 0;
-   last_bot = bot = win->top_window_line;
-
-   while (row < nrows)
-     {
-	if (bot == cline)
-	  win->window_row = row;
-
-	last_bot = bot;
-
-	if (bot == NULL)
-	  break;
-
-	bot = bot->next;
-
-	if (hidden_mask)
-	  {
-	     while ((bot != NULL) && (bot->flags & hidden_mask))
-	       bot = bot->next;
-	  }
-
-	row++;
-     }
-
-   win->bot_window_line = last_bot;
-}
-
-static int find_top_to_recenter (SLscroll_Window_Type *win)
-{
-   unsigned int nrows;
-   unsigned int hidden_mask;
-   SLscroll_Type *prev, *last_prev, *cline;
-
-   nrows = win->nrows;
-   cline = win->current_line;
-   hidden_mask = win->hidden_mask;
-
-   nrows = nrows / 2;
-
-   last_prev = prev = cline;
-
-   while (nrows && (prev != NULL))
-     {
-	nrows--;
-	last_prev = prev;
-	do
-	  {
-	     prev = prev->prev;
-	  }
-	while (hidden_mask
-	       && (prev != NULL)
-	       && (prev->flags & hidden_mask));
-     }
-
-   if (prev == NULL) prev = last_prev;
-
-   win->top_window_line = prev;
-   find_window_bottom (win);
-
-   return 0;
-}
-
-#define HAS_BORDER_CODE 1
-int SLscroll_find_top (SLscroll_Window_Type *win)
-{
-   unsigned int i;
-   SLscroll_Type *cline, *prev, *next;
-   SLscroll_Type *top_window_line;
-   unsigned int nrows;
-   unsigned int hidden_mask;
-   int scroll_mode;
-   unsigned int border;
-
-   cline = win->current_line;
-   nrows = win->nrows;
-   scroll_mode = win->cannot_scroll;
-   border = win->border;
-   if (scroll_mode == 2)
-     border = 0;
-
-   if ((cline == NULL) || (nrows <= 1))
-     {
-	win->top_window_line = cline;
-	find_window_bottom (win);
-	return 0;
-     }
-
-   hidden_mask = win->hidden_mask;
-
-   /* Note: top_window_line might be a bogus pointer.  This means that I cannot
-    * access it unless it really corresponds to a pointer in the buffer.
-    */
-   top_window_line = win->top_window_line;
-
-   if (top_window_line == NULL)
-     return find_top_to_recenter (win);
-
-   /* Chances are that the current line is visible in the window.  This means
-    * that the top window line should be above it.
-    */
-   prev = cline;
-
-   i = 0;
-
-   while ((i < nrows) && (prev != NULL))
-     {
-	if (prev == top_window_line)
-	  {
-	     SLscroll_Type *twl = top_window_line;
-	     int dir = 0;
-
-	     if (i < border) dir = -1; else if (i + border >= nrows) dir = 1;
-
-	     if (dir) while (border)
-	       {
-		  if (dir < 0) twl = twl->prev;
-		  else twl = twl->next;
-
-		  if (twl == NULL)
-		    {
-		       twl = top_window_line;
-		       break;
-		    }
-		  if ((hidden_mask == 0)
-		      || (0 == (twl->flags & hidden_mask)))
-		    border--;
-	       }
-
-	     win->top_window_line = twl;
-	     find_window_bottom (win);
-	     return 0;
-	  }
-
-	do
-	  {
-	     prev = prev->prev;
-	  }
-	while (hidden_mask
-	       && (prev != NULL)
-	       && (prev->flags & hidden_mask));
-	i++;
-     }
-
-   /* Now check the borders of the window.  Perhaps the current line lies
-    * outsider the border by a line.  Only do this if terminal can scroll.
-    */
-
-   if (scroll_mode == 1)
-     return find_top_to_recenter (win);
-   else if (scroll_mode == -1)
-     scroll_mode = 0;
-
-   next = cline->next;
-   while (hidden_mask
-	  && (next != NULL)
-	  && (next->flags & hidden_mask))
-     next = next->next;
-
-   if ((next != NULL)
-       && (next == top_window_line))
-     {
-	/* The current line is one line above the window.  This means user
-	 * has moved up past the top of the window.  If scroll_mode is set
-	 * to scroll by pages, we need to do a page up.
-	 */
-
-	win->top_window_line = cline;
-	find_window_bottom (win);
-
-	if (scroll_mode) return SLscroll_pageup (win);
-
-	return 0;
-     }
-
-   prev = cline->prev;
-
-   while (hidden_mask
-	  && (prev != NULL)
-	  && (prev->flags & hidden_mask))
-     prev = prev->prev;
-
-   if ((prev == NULL)
-       || (prev != win->bot_window_line))
-     return find_top_to_recenter (win);
-
-   /* It looks like cline is below window by one line.  See what line should
-    * be at top to scroll it into view.  Only do this unless we are scrolling
-    * by pages.
-    */
-   if (scroll_mode)
-     {
-	win->top_window_line = cline;
-	find_window_bottom (win);
-	return 0;
-     }
-
-   i = 2;
-   while ((i < nrows) && (prev != NULL))
-     {
-	do
-	  {
-	     prev = prev->prev;
-	  }
-	while (hidden_mask
-	       && (prev != NULL)
-	       && (prev->flags & hidden_mask));
-	i++;
-     }
-
-   if (prev != NULL)
-     {
-	win->top_window_line = prev;
-	find_window_bottom (win);
-	return 0;
-     }
-
-   return find_top_to_recenter (win);
-}
-
-int SLscroll_find_line_num (SLscroll_Window_Type *win)
-{
-   SLscroll_Type *cline, *l;
-   unsigned int n;
-   unsigned int hidden_mask;
-
-   if (win == NULL) return -1;
-
-   hidden_mask = win->hidden_mask;
-   cline = win->current_line;
-
-   n = 1;
-
-   l = win->lines;
-   while (l != cline)
-     {
-	if ((hidden_mask == 0)
-	    || (0 == (l->flags & hidden_mask)))
-	  n++;
-
-	l = l->next;
-     }
-
-   win->line_num = n;
-   n--;
-
-   while (l != NULL)
-     {
-	if ((hidden_mask == 0)
-	    || (0 == (l->flags & hidden_mask)))
-	  n++;
-	l = l->next;
-     }
-   win->num_lines = n;
-
-   return 0;
-}
-
-unsigned int SLscroll_next_n (SLscroll_Window_Type *win, unsigned int n)
-{
-   unsigned int i;
-   unsigned int hidden_mask;
-   SLscroll_Type *l, *cline;
-
-   if ((win == NULL)
-       || (NULL == (cline = win->current_line)))
-     return 0;
-
-   hidden_mask = win->hidden_mask;
-   l = cline;
-   i = 0;
-   while (i < n)
-     {
-	l = l->next;
-	while (hidden_mask
-	       && (l != NULL) && (l->flags & hidden_mask))
-	  l = l->next;
-
-	if (l == NULL)
-	  break;
-
-	i++;
-	cline = l;
-     }
-
-   win->current_line = cline;
-   win->line_num += i;
-   return i;
-}
-
-unsigned int SLscroll_prev_n (SLscroll_Window_Type *win, unsigned int n)
-{
-   unsigned int i;
-   unsigned int hidden_mask;
-   SLscroll_Type *l, *cline;
-
-   if ((win == NULL)
-       || (NULL == (cline = win->current_line)))
-     return 0;
-
-   hidden_mask = win->hidden_mask;
-   l = cline;
-   i = 0;
-   while (i < n)
-     {
-	l = l->prev;
-	while (hidden_mask
-	       && (l != NULL) && (l->flags & hidden_mask))
-	  l = l->prev;
-
-	if (l == NULL)
-	  break;
-
-	i++;
-	cline = l;
-     }
-
-   win->current_line = cline;
-   win->line_num -= i;
-   return i;
-}
-
-int SLscroll_pageup (SLscroll_Window_Type *win)
-{
-   SLscroll_Type *l, *top;
-   unsigned int nrows, hidden_mask;
-   unsigned int n;
-
-   if (win == NULL)
-     return -1;
-
-   (void) SLscroll_find_top (win);
-
-   nrows = win->nrows;
-
-   if ((NULL != (top = win->top_window_line))
-       && (nrows > 2))
-     {
-	n = 0;
-	hidden_mask = win->hidden_mask;
-	l = win->current_line;
-	while ((l != NULL) && (l != top))
-	  {
-	     l = l->prev;
-	     if ((hidden_mask == 0)
-		 || ((l != NULL) && (0 == (l->flags & hidden_mask))))
-	       n++;
-	  }
-
-	if (l != NULL)
-	  {
-	     unsigned int save_line_num;
-	     int ret = 0;
-
-	     win->current_line = l;
-	     win->line_num -= n;
-
-	     /* Compute a new top/bottom header */
-	     save_line_num = win->line_num;
-
-	     if ((0 == SLscroll_prev_n (win, nrows - 1))
-		 && (n == 0))
-	       ret = -1;
-
-	     win->top_window_line = win->current_line;
-	     win->current_line = l;
-	     win->line_num = save_line_num;
-
-	     find_window_bottom (win);
-	     return ret;
-	  }
-     }
-
-   if (nrows < 2) nrows++;
-   if (0 == SLscroll_prev_n (win, nrows - 1))
-     return -1;
-   return 0;
-}
-
-int SLscroll_pagedown (SLscroll_Window_Type *win)
-{
-   SLscroll_Type *l, *bot;
-   unsigned int nrows, hidden_mask;
-   unsigned int n;
-
-   if (win == NULL)
-     return -1;
-
-   (void) SLscroll_find_top (win);
-
-   nrows = win->nrows;
-
-   if ((NULL != (bot = win->bot_window_line))
-       && (nrows > 2))
-     {
-	n = 0;
-	hidden_mask = win->hidden_mask;
-	l = win->current_line;
-	while ((l != NULL) && (l != bot))
-	  {
-	     l = l->next;
-	     if ((hidden_mask == 0)
-		 || ((l != NULL) && (0 == (l->flags & hidden_mask))))
-	       n++;
-	  }
-
-	if (l != NULL)
-	  {
-	     win->current_line = l;
-	     win->top_window_line = l;
-	     win->line_num += n;
-
-	     find_window_bottom (win);
-
-	     if (n || (bot != win->bot_window_line))
-	       return 0;
-
-	     return -1;
-	  }
-     }
-
-   if (nrows < 2) nrows++;
-   if (0 == SLscroll_next_n (win, nrows - 1))
-     return -1;
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slsearch.c b/mdk-stage1/slang/slsearch.c
deleted file mode 100644
index a9a427a7d..000000000
--- a/mdk-stage1/slang/slsearch.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef upcase
-# undef upcase
-#endif
-
-#define upcase(ch) (cs ? ch : UPPER_CASE(ch))
-
-static unsigned char *search_forward (register unsigned char *beg,
-				      unsigned char *end,
-				      unsigned char *key,
-				      register int key_len, int cs, int *ind)
-{
-   register unsigned char char1;
-   unsigned char *pos;
-   int j, str_len;
-   register unsigned char ch;
-   register int db;
-
-   str_len = (int) (end - beg);
-   if (str_len < key_len) return (NULL);
-   
-   if (key_len == 0)
-     return NULL;
-
-   char1 = key[key_len - 1];
-   beg += (key_len - 1);
-
-   while(1)
-     {
-	if (cs) while (beg < end)
-	  {
-	     ch = *beg;
-	     db = ind[(unsigned char) ch];
-	     if ((db < key_len) && (ch == char1)) break;
-	     beg += db; /* ind[(unsigned char) ch]; */
-	  }
-	else while (beg < end)
-	  {
-	     ch = *beg;
-	     db = ind[(unsigned char) ch];
-	     if ((db < key_len) &&
-		 (UPPER_CASE(ch) == char1)) break;
-	     beg += db; /* ind[(unsigned char) ch]; */
-	  }
-
-	if (beg >= end) return(NULL);
-
-	pos = beg - (key_len - 1);
-	for (j = 0; j < key_len; j++)
-	  {
-	     ch = upcase(pos[j]);
-	     if (ch != (unsigned char) key[j]) break;
-	  }
-
-	if (j == key_len) return(pos);
-	beg += 1;
-     }
-}
-
-static unsigned char *search_backward (unsigned char *beg,unsigned char *end,
-				       unsigned char *key, int key_len,
-				       int cs, int *ind)
-{
-   unsigned char ch, char1;
-   int j, str_len, ofs;
-
-    str_len = (int) (end - beg);
-    if (str_len < key_len) return (NULL);
-   
-   if (key_len == 0)
-     return NULL;
-	
-   /*  end -= (key_len - 1); */
-   end -= key_len;
-
-    char1 = key[0];
-
-    while(1)
-      {
-	 while ((beg <= end) && (ch = *end, ch = upcase(ch), ch != char1))
-	   {
-	      ofs = ind[(unsigned char) ch];
-#ifdef __MSDOS__
-	      /* This is needed for msdos segment wrapping problems */
-	      if (beg + ofs > end) return(NULL);
-#endif
-	      end -= ofs;
-	   }
-	 if (beg > end) return(NULL);
-	 for (j = 1; j < key_len; j++)
-	   {
-	      ch = upcase(end[j]);
-	      if (ch != key[j]) break;
-	   }
-	 if (j == key_len) return(end);
-	 end--;
-      }
-}
-
-unsigned char *SLsearch (unsigned char *pmin, unsigned char *pmax,
-			 SLsearch_Type *st)
-{
-   if (st->dir > 0) return search_forward (pmin, pmax, st->key,
-					   st->key_len, st->cs, st->ind);
-   else return search_backward (pmin, pmax, st->key,
-				st->key_len, st->cs, st->ind);
-}
-
-static int Case_Tables_Ok;
-
-int SLsearch_init (char *str, int dir, int cs, SLsearch_Type *st)
-{
-   int i, maxi;
-   register int max = strlen(str);
-   unsigned char *w, *work = st->key;
-   register int *indp, *indpm;
-   int *ind = st->ind;
-
-   if (max >= (int) sizeof (st->key))
-     {
-	SLang_doerror ("Search string too long.");
-	return -1;
-     }
-
-   st->dir = dir; st->cs = cs;
-
-   if (!Case_Tables_Ok) SLang_init_case_tables ();
-
-   if (dir > 0)
-     {
-	w = work;
-     }
-   else
-     {
-	maxi = max - 1;
-	str = str + maxi;
-	w = work + maxi;
-     }
-
-   /* for (i = 0; i < 256; i++) ind[i] = max; */
-   indp = ind; indpm = ind + 256;
-   while (indp < indpm)
-     {
-	*indp++ = max;
-	*indp++ = max;
-	*indp++ = max;
-	*indp++ = max;
-     }
-
-   i = 0;
-   if (cs) while (i < max)
-     {
-	i++;
-	maxi = max - i;
-	*w = *str;
-	ind[(unsigned char) *str] = maxi;
-	str += dir; w += dir;
-     }
-   else while (i < max)
-     {
-	i++;
-	maxi = max - i;
-	*w = UPPER_CASE(*str);
-	ind[(unsigned char) *w] = maxi;
-	ind[(unsigned char) LOWER_CASE(*str)] = maxi;
-	str += dir; w += dir;
-     }
-
-   work[max] = 0;
-   st->key_len = max;
-   return max;
-}
-
-/* 8bit clean upper and lowercase macros */
-unsigned char _SLChg_LCase_Lut[256];
-unsigned char _SLChg_UCase_Lut[256];
-
-void SLang_define_case (int *u, int *l)
-{
-   unsigned char up = (unsigned char) *u, dn = (unsigned char) *l;
-
-   _SLChg_LCase_Lut[up] = dn;
-   _SLChg_LCase_Lut[dn] = dn;
-   _SLChg_UCase_Lut[dn] = up;
-   _SLChg_UCase_Lut[up] = up;
-}
-
-void SLang_init_case_tables (void)
-{
-   int i, j;
-   if (Case_Tables_Ok) return;
-
-   for (i = 0; i < 256; i++)
-     {
-	_SLChg_UCase_Lut[i] = i;
-	_SLChg_LCase_Lut[i] = i;
-     }
-
-   for (i = 'A'; i <= 'Z'; i++)
-     {
-	j = i + 32;
-	_SLChg_UCase_Lut[j] = i;
-	_SLChg_LCase_Lut[i] = j;
-     }
-#ifdef PC_SYSTEM
-   /* Initialize for DOS code page 437. */
-   _SLChg_UCase_Lut[135] = 128; _SLChg_LCase_Lut[128] = 135;
-   _SLChg_UCase_Lut[132] = 142; _SLChg_LCase_Lut[142] = 132;
-   _SLChg_UCase_Lut[134] = 143; _SLChg_LCase_Lut[143] = 134;
-   _SLChg_UCase_Lut[130] = 144; _SLChg_LCase_Lut[144] = 130;
-   _SLChg_UCase_Lut[145] = 146; _SLChg_LCase_Lut[146] = 145;
-   _SLChg_UCase_Lut[148] = 153; _SLChg_LCase_Lut[153] = 148;
-   _SLChg_UCase_Lut[129] = 154; _SLChg_LCase_Lut[154] = 129;
-   _SLChg_UCase_Lut[164] = 165; _SLChg_LCase_Lut[165] = 164;
-#else
-   /* ISO Latin */
-   for (i = 192; i <= 221; i++)
-     {
-	j = i + 32;
-	_SLChg_UCase_Lut[j] = i;
-	_SLChg_LCase_Lut[i] = j;
-     }
-   _SLChg_UCase_Lut[215] = 215; _SLChg_LCase_Lut[215] = 215;
-   _SLChg_UCase_Lut[223] = 223; _SLChg_LCase_Lut[223] = 223;
-   _SLChg_UCase_Lut[247] = 247; _SLChg_LCase_Lut[247] = 247;
-   _SLChg_UCase_Lut[255] = 255; _SLChg_LCase_Lut[255] = 255;
-#endif
-   Case_Tables_Ok = 1;
-}
diff --git a/mdk-stage1/slang/slsignal.c b/mdk-stage1/slang/slsignal.c
deleted file mode 100644
index 30707dea5..000000000
--- a/mdk-stage1/slang/slsignal.c
+++ /dev/null
@@ -1,336 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include <signal.h>
-
-#ifdef HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_WAIT_H
-# include <sys/wait.h>
-#endif
-
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-/* Do not trust these environments */
-#if defined(__CYGWIN32__) || defined(__MINGW32__) || defined(AMIGA)
-# ifdef SLANG_POSIX_SIGNALS
-#  undef SLANG_POSIX_SIGNALS
-# endif
-#endif
-
-/* This function will cause system calls to be restarted after signal if possible */
-SLSig_Fun_Type *SLsignal (int sig, SLSig_Fun_Type *f)
-{
-#if defined(SLANG_POSIX_SIGNALS)
-   struct sigaction old_sa, new_sa;
-
-# ifdef SIGALRM
-   /* We want system calls to be interrupted by SIGALRM. */
-   if (sig == SIGALRM) return SLsignal_intr (sig, f);
-# endif
-
-   sigemptyset (&new_sa.sa_mask);
-   new_sa.sa_handler = f;
-
-   new_sa.sa_flags = 0;
-# ifdef SA_RESTART
-   new_sa.sa_flags |= SA_RESTART;
-# endif
-
-   if (-1 == sigaction (sig, &new_sa, &old_sa))
-     return (SLSig_Fun_Type *) SIG_ERR;
-
-   return old_sa.sa_handler;
-#else
-   /* Not POSIX. */
-   return signal (sig, f);
-#endif
-}
-
-/* This function will NOT cause system calls to be restarted after
- * signal if possible
- */
-SLSig_Fun_Type *SLsignal_intr (int sig, SLSig_Fun_Type *f)
-{
-#ifdef SLANG_POSIX_SIGNALS
-   struct sigaction old_sa, new_sa;
-
-   sigemptyset (&new_sa.sa_mask);
-   new_sa.sa_handler = f;
-
-   new_sa.sa_flags = 0;
-# ifdef SA_INTERRUPT
-   new_sa.sa_flags |= SA_INTERRUPT;
-# endif
-
-   if (-1 == sigaction (sig, &new_sa, &old_sa))
-     return (SLSig_Fun_Type *) SIG_ERR;
-
-   return old_sa.sa_handler;
-#else
-   /* Not POSIX. */
-   return signal (sig, f);
-#endif
-}
-
-/* We are primarily interested in blocking signals that would cause the
- * application to reset the tty.  These include suspend signals and
- * possibly interrupt signals.
- */
-#ifdef SLANG_POSIX_SIGNALS
-static sigset_t Old_Signal_Mask;
-#endif
-
-static volatile unsigned int Blocked_Depth;
-
-int SLsig_block_signals (void)
-{
-#ifdef SLANG_POSIX_SIGNALS
-   sigset_t new_mask;
-#endif
-
-   Blocked_Depth++;
-   if (Blocked_Depth != 1)
-     {
-	return 0;
-     }
-
-#ifdef SLANG_POSIX_SIGNALS
-   sigemptyset (&new_mask);
-# ifdef SIGQUIT
-   sigaddset (&new_mask, SIGQUIT);
-# endif
-# ifdef SIGTSTP
-   sigaddset (&new_mask, SIGTSTP);
-# endif
-# ifdef SIGINT
-   sigaddset (&new_mask, SIGINT);
-# endif
-# ifdef SIGTTIN
-   sigaddset (&new_mask, SIGTTIN);
-# endif
-# ifdef SIGTTOU
-   sigaddset (&new_mask, SIGTTOU);
-# endif
-# ifdef SIGWINCH
-   sigaddset (&new_mask, SIGWINCH);
-# endif
-
-   (void) sigprocmask (SIG_BLOCK, &new_mask, &Old_Signal_Mask);
-   return 0;
-#else
-   /* Not implemented. */
-   return -1;
-#endif
-}
-
-int SLsig_unblock_signals (void)
-{
-   if (Blocked_Depth == 0)
-     return -1;
-
-   Blocked_Depth--;
-
-   if (Blocked_Depth != 0)
-     return 0;
-
-#ifdef SLANG_POSIX_SIGNALS
-   (void) sigprocmask (SIG_SETMASK, &Old_Signal_Mask, NULL);
-   return 0;
-#else
-   return -1;
-#endif
-}
-
-#ifdef MSWINDOWS
-int SLsystem (char *cmd)
-{
-   SLang_verror (SL_NOT_IMPLEMENTED, "system not implemented");
-   return -1;
-}
-
-#else
-int SLsystem (char *cmd)
-{
-#ifdef SLANG_POSIX_SIGNALS
-   pid_t pid;
-   int status;
-   struct sigaction ignore;
-# ifdef SIGINT
-   struct sigaction save_intr;
-# endif
-# ifdef SIGQUIT
-   struct sigaction save_quit;
-# endif
-# ifdef SIGCHLD
-   sigset_t child_mask, save_mask;
-# endif
-
-   if (cmd == NULL) return 1;
-
-   ignore.sa_handler = SIG_IGN;
-   sigemptyset (&ignore.sa_mask);
-   ignore.sa_flags = 0;
-
-# ifdef SIGINT
-   if (-1 == sigaction (SIGINT, &ignore, &save_intr))
-     return -1;
-# endif
-
-# ifdef SIGQUIT
-   if (-1 == sigaction (SIGQUIT, &ignore, &save_quit))
-     {
-	(void) sigaction (SIGINT, &save_intr, NULL);
-	return -1;
-     }
-# endif
-
-# ifdef SIGCHLD
-   sigemptyset (&child_mask);
-   sigaddset (&child_mask, SIGCHLD);
-   if (-1 == sigprocmask (SIG_BLOCK, &child_mask, &save_mask))
-     {
-#  ifdef SIGINT
-	(void) sigaction (SIGINT, &save_intr, NULL);
-#  endif
-#  ifdef SIGQUIT
-	(void) sigaction (SIGQUIT, &save_quit, NULL);
-#  endif
-	return -1;
-     }
-# endif
-
-   pid = fork();
-
-   if (pid == -1)
-     status = -1;
-   else if (pid == 0)
-     {
-	/* Child */
-# ifdef SIGINT
-	(void) sigaction (SIGINT, &save_intr, NULL);
-# endif
-# ifdef SIGQUIT
-	(void) sigaction (SIGQUIT, &save_quit, NULL);
-# endif
-# ifdef SIGCHLD
-	(void) sigprocmask (SIG_SETMASK, &save_mask, NULL);
-# endif
-
-	execl ("/bin/sh", "sh", "-c", cmd, NULL);
-	_exit (127);
-     }
-   else
-     {
-	/* parent */
-	while (-1 == waitpid (pid, &status, 0))
-	  {
-# ifdef EINTR
-	     if (errno == EINTR)
-	       continue;
-# endif
-# ifdef ERESTARTSYS
-	     if (errno == ERESTARTSYS)
-	       continue;
-# endif
-	     status = -1;
-	     break;
-	  }
-     }
-# ifdef SIGINT
-   if (-1 == sigaction (SIGINT, &save_intr, NULL))
-     status = -1;
-# endif
-# ifdef SIGQUIT
-   if (-1 == sigaction (SIGQUIT, &save_quit, NULL))
-     status = -1;
-# endif
-# ifdef SIGCHLD
-   if (-1 == sigprocmask (SIG_SETMASK, &save_mask, NULL))
-     status = -1;
-# endif
-
-   return status;
-
-#else				       /* No POSIX Signals */
-# ifdef SIGINT
-   void (*sint)(int);
-# endif
-# ifdef SIGQUIT
-   void (*squit)(int);
-# endif
-   int status;
-
-# ifdef SIGQUIT
-   squit = SLsignal (SIGQUIT, SIG_IGN);
-# endif
-# ifdef SIGINT
-   sint = SLsignal (SIGINT, SIG_IGN);
-# endif
-   status = system (cmd);
-# ifdef SIGINT
-   SLsignal (SIGINT, sint);
-# endif
-# ifdef SIGQUIT
-   SLsignal (SIGQUIT, squit);
-# endif
-   return status;
-#endif				       /* POSIX_SIGNALS */
-}
-#endif
-
-#if 0
-#include <windows.h>
-static int msw_system (char *cmd)
-{
-   STARTUPINFO startup_info;
-   PROCESS_INFORMATION process_info;
-   int status;
-
-   if (cmd == NULL) return -1;
-
-   memset ((char *) &startup_info, 0, sizeof (STARTUPINFO));
-   startup_info.cb = sizeof(STARTUPINFO);
-   startup_info.dwFlags = STARTF_USESHOWWINDOW;
-   startup_info.wShowWindow = SW_SHOWDEFAULT;
-
-   if (FALSE == CreateProcess (NULL,
-			       cmd,
-			       NULL,
-			       NULL,
-			       FALSE,
-			       NORMAL_PRIORITY_CLASS|CREATE_NEW_CONSOLE,
-			       NULL,
-			       NULL,
-			       &startup_info,
-			       &process_info))
-     {
-	SLang_verror (0, "%s: CreateProcess failed.", cmd);
-	return -1;
-     }
-
-   status = -1;
-
-   if (0xFFFFFFFFUL != WaitForSingleObject (process_info.hProcess, INFINITE))
-     {
-	DWORD exit_code;
-
-	if (TRUE == GetExitCodeProcess (process_info.hProcess, &exit_code))
-	  status = (int) exit_code;
-     }
-
-   CloseHandle (process_info.hThread);
-   CloseHandle (process_info.hProcess);
-
-   return status;
-}
-#endif
diff --git a/mdk-stage1/slang/slsmg.c b/mdk-stage1/slang/slsmg.c
deleted file mode 100644
index 088557f27..000000000
--- a/mdk-stage1/slang/slsmg.c
+++ /dev/null
@@ -1,1584 +0,0 @@
-/* SLang Screen management routines */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-typedef struct Screen_Type
-  {
-     int n;                    /* number of chars written last time */
-     int flags;                /* line untouched, etc... */
-     SLsmg_Char_Type *old, *neew;
-#ifndef IBMPC_SYSTEM
-     unsigned long old_hash, new_hash;
-#endif
-  }
-Screen_Type;
-
-#define TOUCHED 0x1
-#define TRASHED 0x2
-static int Screen_Trashed;
-
-#if !defined(__MSDOS_16BIT__)
-# define MAX_SCREEN_SIZE 256
-#else
-# define MAX_SCREEN_SIZE 75
-#endif
-
-Screen_Type SL_Screen[MAX_SCREEN_SIZE];
-static int Start_Col, Start_Row;
-static int Screen_Cols, Screen_Rows;
-static int This_Row, This_Col;
-static int This_Color;		       /* only the first 8 bits of this
-					* are used.  The highest bit is used
-					* to indicate an alternate character
-					* set.  This leaves 127 userdefineable
-					* color combination.
-					*/
-
-#ifndef IBMPC_SYSTEM
-#define ALT_CHAR_FLAG 0x80
-#else
-#define ALT_CHAR_FLAG 0x00
-#endif
-
-#if SLTT_HAS_NON_BCE_SUPPORT && !defined(IBMPC_SYSTEM)
-#define REQUIRES_NON_BCE_SUPPORT 1
-static int Bce_Color_Offset;
-#endif
-
-int SLsmg_Newline_Behavior = 0;
-int SLsmg_Backspace_Moves = 0;
-/* Backward compatibility. Not used. */
-/* int SLsmg_Newline_Moves; */
-
-static void (*tt_normal_video)(void) = SLtt_normal_video;
-static void (*tt_goto_rc)(int, int) = SLtt_goto_rc;
-static void (*tt_cls) (void) = SLtt_cls;
-static void (*tt_del_eol) (void) = SLtt_del_eol;
-static void (*tt_smart_puts) (SLsmg_Char_Type *, SLsmg_Char_Type *, int, int) = SLtt_smart_puts;
-static int (*tt_flush_output) (void) = SLtt_flush_output;
-static int (*tt_reset_video) (void) = SLtt_reset_video;
-static int (*tt_init_video) (void) = SLtt_init_video;
-static int *tt_Screen_Rows = &SLtt_Screen_Rows;
-static int *tt_Screen_Cols = &SLtt_Screen_Cols;
-
-#ifndef IBMPC_SYSTEM
-static void (*tt_set_scroll_region)(int, int) = SLtt_set_scroll_region;
-static void (*tt_reverse_index)(int) = SLtt_reverse_index;
-static void (*tt_reset_scroll_region)(void) = SLtt_reset_scroll_region;
-static void (*tt_delete_nlines)(int) = SLtt_delete_nlines;
-#endif
-
-#ifndef IBMPC_SYSTEM
-static int *tt_Term_Cannot_Scroll = &SLtt_Term_Cannot_Scroll;
-static int *tt_Has_Alt_Charset = &SLtt_Has_Alt_Charset;
-static char **tt_Graphics_Char_Pairs = &SLtt_Graphics_Char_Pairs;
-static int *tt_Use_Blink_For_ACS = &SLtt_Use_Blink_For_ACS;
-#endif
-
-static int Smg_Inited;
-
-static void blank_line (SLsmg_Char_Type *p, int n, unsigned char ch)
-{
-   register SLsmg_Char_Type *pmax = p + n;
-   register SLsmg_Char_Type color_ch;
-
-   color_ch = SLSMG_BUILD_CHAR(ch,This_Color);
-
-   while (p < pmax)
-     {
-	*p++ = color_ch;
-     }
-}
-
-static void clear_region (int row, int n)
-{
-   int i;
-   int imax = row + n;
-
-   if (imax > Screen_Rows) imax = Screen_Rows;
-   for (i = row; i < imax; i++)
-     {
-	if (i >= 0)
-	  {
-	     blank_line (SL_Screen[i].neew, Screen_Cols, ' ');
-	     SL_Screen[i].flags |= TOUCHED;
-	  }
-     }
-}
-
-void SLsmg_erase_eol (void)
-{
-   int r, c;
-
-   if (Smg_Inited == 0) return;
-
-   c = This_Col - Start_Col;
-   r = This_Row - Start_Row;
-
-   if ((r < 0) || (r >= Screen_Rows)) return;
-   if (c < 0) c = 0; else if (c >= Screen_Cols) return;
-   blank_line (SL_Screen[This_Row].neew + c , Screen_Cols - c, ' ');
-   SL_Screen[This_Row].flags |= TOUCHED;
-}
-
-static void scroll_up (void)
-{
-   unsigned int i, imax;
-   SLsmg_Char_Type *neew;
-
-   neew = SL_Screen[0].neew;
-   imax = Screen_Rows - 1;
-   for (i = 0; i < imax; i++)
-     {
-	SL_Screen[i].neew = SL_Screen[i + 1].neew;
-	SL_Screen[i].flags |= TOUCHED;
-     }
-   SL_Screen[i].neew = neew;
-   SL_Screen[i].flags |= TOUCHED;
-   blank_line (neew, Screen_Cols, ' ');
-   This_Row--;
-}
-
-void SLsmg_gotorc (int r, int c)
-{
-   This_Row = r;
-   This_Col = c;
-}
-
-int SLsmg_get_row (void)
-{
-   return This_Row;
-}
-
-int SLsmg_get_column (void)
-{
-   return This_Col;
-}
-
-void SLsmg_erase_eos (void)
-{
-   if (Smg_Inited == 0) return;
-
-   SLsmg_erase_eol ();
-   clear_region (This_Row + 1, Screen_Rows);
-}
-
-static int This_Alt_Char;
-
-void SLsmg_set_char_set (int i)
-{
-#ifdef IBMPC_SYSTEM
-   (void) i;
-#else
-   if ((tt_Use_Blink_For_ACS != NULL)
-       && (*tt_Use_Blink_For_ACS != 0))
-     return;/* alt chars not used and the alt bit
-	     * is used to indicate a blink.
-	     */
-
-   if (i) This_Alt_Char = ALT_CHAR_FLAG;
-   else This_Alt_Char = 0;
-
-   This_Color &= 0x7F;
-   This_Color |= This_Alt_Char;
-#endif
-}
-
-void SLsmg_set_color (int color)
-{
-   if (color < 0) return;
-#ifdef REQUIRES_NON_BCE_SUPPORT
-   color += Bce_Color_Offset;
-#endif
-   This_Color = color | This_Alt_Char;
-}
-
-void SLsmg_reverse_video (void)
-{
-   SLsmg_set_color (1);
-}
-
-void SLsmg_normal_video (void)
-{
-   SLsmg_set_color (0);
-}
-
-static int point_visible (int col_too)
-{
-   return ((This_Row >= Start_Row) && (This_Row < Start_Row + Screen_Rows)
-	   && ((col_too == 0)
-	       || ((This_Col >= Start_Col)
-		   && (This_Col < Start_Col + Screen_Cols))));
-}
-
-void SLsmg_write_string (char *str)
-{
-   SLsmg_write_nchars (str, strlen (str));
-}
-
-void SLsmg_write_nstring (char *str, unsigned int n)
-{
-   unsigned int width;
-   char blank = ' ';
-
-   /* Avoid a problem if a user accidently passes a negative value */
-   if ((int) n < 0)
-     return;
-
-   if (str == NULL) width = 0;
-   else
-     {
-	width = strlen (str);
-	if (width > n) width = n;
-	SLsmg_write_nchars (str, width);
-     }
-   while (width++ < n) SLsmg_write_nchars (&blank, 1);
-}
-
-void SLsmg_write_wrapped_string (char *s, int r, int c,
-				 unsigned int dr, unsigned int dc,
-				 int fill)
-{
-   register char ch, *p;
-   int maxc = (int) dc;
-
-   if ((dr == 0) || (dc == 0)) return;
-   p = s;
-   dc = 0;
-   while (1)
-     {
-	ch = *p++;
-	if ((ch == 0) || (ch == '\n'))
-	  {
-	     int diff;
-
-	     diff = maxc - (int) dc;
-
-	     SLsmg_gotorc (r, c);
-	     SLsmg_write_nchars (s, dc);
-	     if (fill && (diff > 0))
-	       {
-		  while (diff--) SLsmg_write_char (' ');
-	       }
-	     if ((ch == 0) || (dr == 1)) break;
-
-	     r++;
-	     dc = 0;
-	     dr--;
-	     s = p;
-	  }
-	else if ((int) dc == maxc)
-	  {
-	     SLsmg_gotorc (r, c);
-	     SLsmg_write_nchars (s, dc + 1);
-	     if (dr == 1) break;
-
-	     r++;
-	     dc = 0;
-	     dr--;
-	     s = p;
-	  }
-	else dc++;
-     }
-}
-
-int SLsmg_Tab_Width = 8;
-
-/* Minimum value for which eight bit char is displayed as is. */
-
-#ifndef IBMPC_SYSTEM
-int SLsmg_Display_Eight_Bit = 160;
-static unsigned char Alt_Char_Set[129];/* 129th is used as a flag */
-#else
-int SLsmg_Display_Eight_Bit = 128;
-#endif
-
-void SLsmg_write_nchars (char *str, unsigned int n)
-{
-   register SLsmg_Char_Type *p, old, neew, color;
-   unsigned char ch;
-   unsigned int flags;
-   int len, start_len, max_len;
-   char *str_max;
-   int newline_flag;
-#ifndef IBMPC_SYSTEM
-   int alt_char_set_flag;
-
-   alt_char_set_flag = ((This_Color & ALT_CHAR_FLAG)
-			&& ((tt_Use_Blink_For_ACS == NULL)
-			    || (*tt_Use_Blink_For_ACS == 0)));
-#endif
-
-   if (Smg_Inited == 0) return;
-
-   str_max = str + n;
-   color = This_Color;
-
-   top:				       /* get here only on newline */
-
-   newline_flag = 0;
-   start_len = Start_Col;
-
-   if (point_visible (0) == 0) return;
-
-   len = This_Col;
-   max_len = start_len + Screen_Cols;
-
-   p = SL_Screen[This_Row - Start_Row].neew;
-   if (len > start_len) p += (len - start_len);
-
-   flags = SL_Screen[This_Row - Start_Row].flags;
-   while ((len < max_len) && (str < str_max))
-     {
-	ch = (unsigned char) *str++;
-
-#ifndef IBMPC_SYSTEM
-	if (alt_char_set_flag)
-	  ch = Alt_Char_Set [ch & 0x7F];
-#endif
-	if (((ch >= ' ') && (ch < 127))
-	    || (ch >= (unsigned char) SLsmg_Display_Eight_Bit)
-#ifndef IBMPC_SYSTEM
-	    || alt_char_set_flag
-#endif
-	    )
-	  {
-	     len += 1;
-	     if (len > start_len)
-	       {
-		  old = *p;
-		  neew = SLSMG_BUILD_CHAR(ch,color);
-		  if (old != neew)
-		    {
-		       flags |= TOUCHED;
-		       *p = neew;
-		    }
-		  p++;
-	       }
-	  }
-
-	else if ((ch == '\t') && (SLsmg_Tab_Width > 0))
-	  {
-	     n = len;
-	     n += SLsmg_Tab_Width;
-	     n = SLsmg_Tab_Width - (n % SLsmg_Tab_Width);
-	     if ((unsigned int) len + n > (unsigned int) max_len)
-	       n = (unsigned int) (max_len - len);
-	     neew = SLSMG_BUILD_CHAR(' ',color);
-	     while (n--)
-	       {
-		  len += 1;
-		  if (len > start_len)
-		    {
-		       if (*p != neew)
-			 {
-			    flags |= TOUCHED;
-			    *p = neew;
-			 }
-		       p++;
-		    }
-	       }
-	  }
-	else if ((ch == '\n')
-		 && (SLsmg_Newline_Behavior != SLSMG_NEWLINE_PRINTABLE))
-	  {
-	     newline_flag = 1;
-	     break;
-	  }
-	else if ((ch == 0x8) && SLsmg_Backspace_Moves)
-	  {
-	     if (len != 0) len--;
-	  }
-	else
-	  {
-	     if (ch & 0x80)
-	       {
-		  neew = SLSMG_BUILD_CHAR('~',color);
-		  len += 1;
-		  if (len > start_len)
-		    {
-		       if (*p != neew)
-			 {
-			    *p = neew;
-			    flags |= TOUCHED;
-			 }
-		       p++;
-		       if (len == max_len) break;
-		       ch &= 0x7F;
-		    }
-	       }
-
-	     len += 1;
-	     if (len > start_len)
-	       {
-		  neew = SLSMG_BUILD_CHAR('^',color);
-		  if (*p != neew)
-		    {
-		       *p = neew;
-		       flags |= TOUCHED;
-		    }
-		  p++;
-		  if (len == max_len) break;
-	       }
-
-	     if (ch == 127) ch = '?'; else ch = ch + '@';
-	     len++;
-	     if (len > start_len)
-	       {
-		  neew = SLSMG_BUILD_CHAR(ch,color);
-		  if (*p != neew)
-		    {
-		       *p = neew;
-		       flags |= TOUCHED;
-		    }
-		  p++;
-	       }
-	  }
-     }
-
-   SL_Screen[This_Row - Start_Row].flags = flags;
-   This_Col = len;
-
-   if (SLsmg_Newline_Behavior == 0)
-     return;
-
-   if (newline_flag == 0)
-     {
-	while (str < str_max)
-	  {
-	     if (*str == '\n') break;
-	     str++;
-	  }
-	if (str == str_max) return;
-	str++;
-     }
-
-   This_Row++;
-   This_Col = 0;
-   if (This_Row == Start_Row + Screen_Rows)
-     {
-	if (SLsmg_Newline_Behavior == SLSMG_NEWLINE_SCROLLS) scroll_up ();
-     }
-   goto top;
-}
-
-void SLsmg_write_char (char ch)
-{
-   SLsmg_write_nchars (&ch, 1);
-}
-
-static int Cls_Flag;
-
-void SLsmg_cls (void)
-{
-   int tac;
-   if (Smg_Inited == 0) return;
-
-   tac = This_Alt_Char; This_Alt_Char = 0;
-   SLsmg_set_color (0);
-   clear_region (0, Screen_Rows);
-   This_Alt_Char = tac;
-   SLsmg_set_color (0);
-   Cls_Flag = 1;
-}
-#if 0
-static void do_copy (SLsmg_Char_Type *a, SLsmg_Char_Type *b)
-{
-   SLsmg_Char_Type *amax = a + Screen_Cols;
-
-   while (a < amax) *a++ = *b++;
-}
-#endif
-
-#ifndef IBMPC_SYSTEM
-int SLsmg_Scroll_Hash_Border = 0;
-static unsigned long compute_hash (SLsmg_Char_Type *s, int n)
-{
-   register unsigned long h = 0, g;
-   register unsigned long sum = 0;
-   register SLsmg_Char_Type *smax, ch;
-   int is_blank = 2;
-
-   s += SLsmg_Scroll_Hash_Border;
-   smax = s + (n - SLsmg_Scroll_Hash_Border);
-   while (s < smax)
-     {
-	ch = *s++;
-	if (is_blank && (SLSMG_EXTRACT_CHAR(ch) != 32)) is_blank--;
-
-	sum += ch;
-
-	h = sum + (h << 3);
-	if ((g = h & 0xE0000000UL) != 0)
-	  {
-	     h = h ^ (g >> 24);
-	     h = h ^ g;
-	  }
-     }
-   if (is_blank) return 0;
-   return h;
-}
-
-static unsigned long Blank_Hash;
-
-static int try_scroll_down (int rmin, int rmax)
-{
-   int i, r1, r2, di, j;
-   unsigned long hash;
-   int did_scroll;
-   int color;
-   SLsmg_Char_Type *tmp;
-   int ignore;
-
-   did_scroll = 0;
-   for (i = rmax; i > rmin; i--)
-     {
-	hash = SL_Screen[i].new_hash;
-	if (hash == Blank_Hash) continue;
-
-	if ((hash == SL_Screen[i].old_hash)
-#if 0
-	    || ((i + 1 < Screen_Rows) && (hash == SL_Screen[i + 1].old_hash))
-	    || ((i - 1 > rmin) && (SL_Screen[i].old_hash == SL_Screen[i - 1].new_hash))
-#endif
-	    )
-	  continue;
-
-	for (j = i - 1; j >= rmin; j--)
-	  {
-	     if (hash == SL_Screen[j].old_hash) break;
-	  }
-	if (j < rmin) continue;
-
-	r2 = i;			       /* end scroll region */
-
-	di = i - j;
-	j--;
-	ignore = 0;
-	while ((j >= rmin) && (SL_Screen[j].old_hash == SL_Screen[j + di].new_hash))
-	  {
-	     if (SL_Screen[j].old_hash == Blank_Hash) ignore++;
-	     j--;
-	  }
-	r1 = j + 1;
-
-	/* If this scroll only scrolls this line into place, don't do it.
-	 */
-	if ((di > 1) && (r1 + di + ignore == r2)) continue;
-
-	/* If there is anything in the scrolling region that is ok, abort the
-	 * scroll.
-	 */
-
-	for (j = r1; j <= r2; j++)
-	  {
-	     if ((SL_Screen[j].old_hash != Blank_Hash)
-		 && (SL_Screen[j].old_hash == SL_Screen[j].new_hash))
-	       {
-		  /* See if the scroll is happens to scroll this one into place. */
-		  if ((j + di > r2) || (SL_Screen[j].old_hash != SL_Screen[j + di].new_hash))
-		    break;
-	       }
-	  }
-	if (j <= r2) continue;
-
-	color = This_Color;  This_Color = 0;
-	did_scroll = 1;
-	(*tt_normal_video) ();
-	(*tt_set_scroll_region) (r1, r2);
-	(*tt_goto_rc) (0, 0);
-	(*tt_reverse_index) (di);
-	(*tt_reset_scroll_region) ();
-	/* Now we have a hole in the screen.
-	 * Make the virtual screen look like it.
-	 * 
-	 * Note that if the terminal does not support BCE, then we have
-	 * no idea what color the hole is.  So, for this case, we do not
-	 * want to add Bce_Color_Offset to This_Color since if Bce_Color_Offset
-	 * is non-zero, then This_Color = 0 does not match any valid color
-	 * obtained by adding Bce_Color_Offset.
-	 */
-	for (j = r1; j <= r2; j++) SL_Screen[j].flags = TOUCHED;
-
-	while (di--)
-	  {
-	     tmp = SL_Screen[r2].old;
-	     for (j = r2; j > r1; j--)
-	       {
-		  SL_Screen[j].old = SL_Screen[j - 1].old;
-		  SL_Screen[j].old_hash = SL_Screen[j - 1].old_hash;
-	       }
-	     SL_Screen[r1].old = tmp;
-	     blank_line (SL_Screen[r1].old, Screen_Cols, ' ');
-	     SL_Screen[r1].old_hash = Blank_Hash;
-	     r1++;
-	  }
-	This_Color = color;
-     }
-
-   return did_scroll;
-}
-
-static int try_scroll_up (int rmin, int rmax)
-{
-   int i, r1, r2, di, j;
-   unsigned long hash;
-   int did_scroll;
-   int color;
-   SLsmg_Char_Type *tmp;
-   int ignore;
-
-   did_scroll = 0;
-   for (i = rmin; i < rmax; i++)
-     {
-	hash = SL_Screen[i].new_hash;
-	if (hash == Blank_Hash) continue;
-	if (hash == SL_Screen[i].old_hash)
-	  continue;
-	/* find a match further down screen */
-	for (j = i + 1; j <= rmax; j++)
-	  {
-	     if (hash == SL_Screen[j].old_hash) break;
-	  }
-	if (j > rmax) continue;
-
-	r1 = i;			       /* beg scroll region */
-	di = j - i;		       /* number of lines to scroll */
-	j++;			       /* since we know this is a match */
-
-	/* find end of scroll region */
-	ignore = 0;
-	while ((j <= rmax) && (SL_Screen[j].old_hash == SL_Screen[j - di].new_hash))
-	  {
-	     if (SL_Screen[j].old_hash == Blank_Hash) ignore++;
-	     j++;
-	  }
-	r2 = j - 1;		       /* end of scroll region */
-
-	/* If this scroll only scrolls this line into place, don't do it.
-	 */
-	if ((di > 1) && (r1 + di + ignore == r2)) continue;
-
-	/* If there is anything in the scrolling region that is ok, abort the
-	 * scroll.
-	 */
-
-	for (j = r1; j <= r2; j++)
-	  {
-	     if ((SL_Screen[j].old_hash != Blank_Hash)
-		 && (SL_Screen[j].old_hash == SL_Screen[j].new_hash))
-	       {
-		  if ((j - di < r1) || (SL_Screen[j].old_hash != SL_Screen[j - di].new_hash))
-		    break;
-	       }
-
-	  }
-	if (j <= r2) continue;
-
-	did_scroll = 1;
-
-	/* See the above comments about BCE */
-	color = This_Color;  This_Color = 0;
-	(*tt_normal_video) ();
-	(*tt_set_scroll_region) (r1, r2);
-	(*tt_goto_rc) (0, 0);	       /* relative to scroll region */
-	(*tt_delete_nlines) (di);
-	(*tt_reset_scroll_region) ();
-	/* Now we have a hole in the screen.  Make the virtual screen look
-	 * like it.
-	 */
-	for (j = r1; j <= r2; j++) SL_Screen[j].flags = TOUCHED;
-
-	while (di--)
-	  {
-	     tmp = SL_Screen[r1].old;
-	     for (j = r1; j < r2; j++)
-	       {
-		  SL_Screen[j].old = SL_Screen[j + 1].old;
-		  SL_Screen[j].old_hash = SL_Screen[j + 1].old_hash;
-	       }
-	     SL_Screen[r2].old = tmp;
-	     blank_line (SL_Screen[r2].old, Screen_Cols, ' ');
-	     SL_Screen[r2].old_hash = Blank_Hash;
-	     r2--;
-	  }
-	This_Color = color;
-     }
-   return did_scroll;
-}
-
-static void try_scroll (void)
-{
-   int r1, rmin, rmax;
-   int num_up, num_down;
-   /* find region limits. */
-
-   for (rmax = Screen_Rows - 1; rmax > 0; rmax--)
-     {
-	if (SL_Screen[rmax].new_hash != SL_Screen[rmax].old_hash)
-	  {
-	     r1 = rmax - 1;
-	     if ((r1 == 0)
-		 || (SL_Screen[r1].new_hash != SL_Screen[r1].old_hash))
-	       break;
-
-	     rmax = r1;
-	  }
-     }
-
-   for (rmin = 0; rmin < rmax; rmin++)
-     {
-	if (SL_Screen[rmin].new_hash != SL_Screen[rmin].old_hash)
-	  {
-	     r1 = rmin + 1;
-	     if ((r1 == rmax)
-		 || (SL_Screen[r1].new_hash != SL_Screen[r1].old_hash))
-	       break;
-
-	     rmin = r1;
-	  }
-     }
-
-   /* Below, we have two scrolling algorithms.  The first has the effect of
-    * scrolling lines down.  This is usually appropriate when one moves
-    * up the display, e.g., with the UP arrow.  The second algorithm is
-    * appropriate for going the other way.  It is important to choose the
-    * correct one.
-    */
-
-   num_up = 0;
-   for (r1 = rmin; r1 < rmax; r1++)
-     {
-	if (SL_Screen[r1].new_hash == SL_Screen[r1 + 1].old_hash)
-	  num_up++;
-     }
-
-   num_down = 0;
-   for (r1 = rmax; r1 > rmin; r1--)
-     {
-	if (SL_Screen[r1 - 1].old_hash == SL_Screen[r1].new_hash)
-	  num_down++;
-     }
-
-   if (num_up > num_down)
-     {
-	if (try_scroll_up (rmin, rmax))
-	  return;
-
-	(void) try_scroll_down (rmin, rmax);
-     }
-   else
-     {
-	if (try_scroll_down (rmin, rmax))
-	  return;
-
-	(void) try_scroll_up (rmin, rmax);
-     }
-}
-#endif   /* NOT IBMPC_SYSTEM */
-
-
-#ifdef REQUIRES_NON_BCE_SUPPORT
-static void adjust_colors (void)
-{
-   int bce;
-   int i;
-
-   bce = Bce_Color_Offset;
-   Bce_Color_Offset = _SLtt_get_bce_color_offset ();
-   if (bce == Bce_Color_Offset)
-     return;
-   
-  if ((tt_Use_Blink_For_ACS != NULL)
-       && (*tt_Use_Blink_For_ACS != 0))
-     return;			       /* this mode does not support non-BCE
-					* terminals.
-					*/
-
-   for (i = 0; i < Screen_Rows; i++)
-     {
-	SLsmg_Char_Type *s, *smax;
-
-	SL_Screen[i].flags |= TRASHED;
-	s = SL_Screen[i].neew;
-	smax = s + Screen_Cols;
-	
-	while (s < smax)
-	  {
-	     int color = (int) SLSMG_EXTRACT_COLOR(*s);
-	     int acs;
-
-	     if (color < 0)
-	       {
-		  s++;
-		  continue;
-	       }
-	     
-	     acs = color & 0x80;
-	     color = (color & 0x7F) - bce;
-	     color += Bce_Color_Offset;
-	     if (color >= 0)
-	       {
-		  unsigned char ch = SLSMG_EXTRACT_CHAR(*s);
-		  *s = SLSMG_BUILD_CHAR(ch, ((color&0x7F)|acs));
-	       }
-	     s++;
-	  }
-     }
-}
-#endif
-
-void SLsmg_refresh (void)
-{
-   int i;
-#ifndef IBMPC_SYSTEM
-   int trashed = 0;
-#endif
-
-   if (Smg_Inited == 0) return;
-   
-   if (Screen_Trashed)
-     {
-	Cls_Flag = 1;
-	for (i = 0; i < Screen_Rows; i++)
-	  SL_Screen[i].flags |= TRASHED;
-#ifdef REQUIRES_NON_BCE_SUPPORT
-	adjust_colors ();
-#endif
-     }
-
-#ifndef IBMPC_SYSTEM
-   for (i = 0; i < Screen_Rows; i++)
-     {
-	if (SL_Screen[i].flags == 0) continue;
-	SL_Screen[i].new_hash = compute_hash (SL_Screen[i].neew, Screen_Cols);
-	trashed = 1;
-     }
-#endif
-
-   if (Cls_Flag)
-     {
-	(*tt_normal_video) ();  (*tt_cls) ();
-     }
-#ifndef IBMPC_SYSTEM
-   else if (trashed && (*tt_Term_Cannot_Scroll == 0)) try_scroll ();
-#endif
-
-   for (i = 0; i < Screen_Rows; i++)
-     {
-	if (SL_Screen[i].flags == 0) continue;
-
-	if (Cls_Flag || SL_Screen[i].flags & TRASHED)
-	  {
-	     int color = This_Color;
-
-	     if (Cls_Flag == 0) 
-	       {
-		  (*tt_goto_rc) (i, 0);
-		  (*tt_del_eol) ();
-	       }
-	     This_Color = 0;
-	     blank_line (SL_Screen[i].old, Screen_Cols, ' ');
-	     This_Color = color;
-	  }
-
-	SL_Screen[i].old[Screen_Cols] = 0;
-	SL_Screen[i].neew[Screen_Cols] = 0;
-
-	(*tt_smart_puts) (SL_Screen[i].neew, SL_Screen[i].old, Screen_Cols, i);
-
-	SLMEMCPY ((char *) SL_Screen[i].old, (char *) SL_Screen[i].neew,
-		  Screen_Cols * sizeof (SLsmg_Char_Type));
-
-	SL_Screen[i].flags = 0;
-#ifndef IBMPC_SYSTEM
-	SL_Screen[i].old_hash = SL_Screen[i].new_hash;
-#endif
-     }
-
-   if (point_visible (1)) (*tt_goto_rc) (This_Row - Start_Row, This_Col - Start_Col);
-   (*tt_flush_output) ();
-   Cls_Flag = 0;
-   Screen_Trashed = 0;
-}
-
-static int compute_clip (int row, int n, int box_start, int box_end,
-			 int *rmin, int *rmax)
-{
-   int row_max;
-
-   if (n < 0) return 0;
-   if (row >= box_end) return 0;
-   row_max = row + n;
-   if (row_max <= box_start) return 0;
-
-   if (row < box_start) row = box_start;
-   if (row_max >= box_end) row_max = box_end;
-   *rmin = row;
-   *rmax = row_max;
-   return 1;
-}
-
-void SLsmg_touch_lines (int row, unsigned int n)
-{
-   int i;
-   int r1, r2;
-
-   /* Allow this function to be called even when we are not initialied.
-    * Calling this function is useful after calling SLtt_set_color
-    * to force the display to be redrawn
-    */
-
-   if (Smg_Inited == 0)
-     return;
-
-   if (0 == compute_clip (row, (int) n, Start_Row, Start_Row + Screen_Rows, &r1, &r2))
-     return;
-
-   r1 -= Start_Row;
-   r2 -= Start_Row;
-   for (i = r1; i < r2; i++)
-     {
-	SL_Screen[i].flags |= TRASHED;
-     }
-}
-
-void SLsmg_touch_screen (void)
-{
-   Screen_Trashed = 1;
-}
-
-			  
-#ifndef IBMPC_SYSTEM
-static char Fake_Alt_Char_Pairs [] = "a:j+k+l+m+q-t+u+v+w+x|n+`+f\\g#~o,<+>.v-^h#0#";
-
-static void init_alt_char_set (void)
-{
-   int i;
-   unsigned char *p, *pmax, ch;
-
-   if (Alt_Char_Set[128] == 128) return;
-
-   i = 32;
-   memset ((char *)Alt_Char_Set, ' ', i);
-   while (i <= 128)
-     {
-	Alt_Char_Set [i] = i;
-	i++;
-     }
-
-   /* Map to VT100 */
-   if (*tt_Has_Alt_Charset)
-     {
-	if (tt_Graphics_Char_Pairs == NULL) p = NULL;
-	else p = (unsigned char *) *tt_Graphics_Char_Pairs;
-	if (p == NULL) return;
-     }
-   else	p = (unsigned char *) Fake_Alt_Char_Pairs;
-   pmax = p + strlen ((char *) p);
-
-   /* Some systems have messed up entries for this */
-   while (p < pmax)
-     {
-	ch = *p++;
-	ch &= 0x7F;		       /* should be unnecessary */
-	Alt_Char_Set [ch] = *p;
-	p++;
-     }
-}
-#endif
-
-#ifndef IBMPC_SYSTEM
-# define BLOCK_SIGNALS SLsig_block_signals ()
-# define UNBLOCK_SIGNALS SLsig_unblock_signals ()
-#else
-# define BLOCK_SIGNALS (void)0
-# define UNBLOCK_SIGNALS (void)0
-#endif
-
-static int Smg_Suspended;
-int SLsmg_suspend_smg (void)
-{
-   BLOCK_SIGNALS;
-
-   if (Smg_Suspended == 0)
-     {
-	(*tt_reset_video) ();
-	Smg_Suspended = 1;
-     }
-
-   UNBLOCK_SIGNALS;
-   return 0;
-}
-
-int SLsmg_resume_smg (void)
-{
-   BLOCK_SIGNALS;
-
-   if (Smg_Suspended == 0)
-     {
-	UNBLOCK_SIGNALS;
-	return 0;
-     }
-
-   Smg_Suspended = 0;
-
-   if (-1 == (*tt_init_video) ())
-     {
-	UNBLOCK_SIGNALS;
-	return -1;
-     }
-
-   Cls_Flag = 1;
-   SLsmg_touch_screen ();
-   SLsmg_refresh ();
-
-   UNBLOCK_SIGNALS;
-   return 0;
-}
-
-   
-static void reset_smg (void)
-{
-   int i;
-   if (Smg_Inited == 0)
-     return;
-
-   for (i = 0; i < Screen_Rows; i++)
-     {
-	SLfree ((char *)SL_Screen[i].old);
-	SLfree ((char *)SL_Screen[i].neew);
-	SL_Screen[i].old = SL_Screen[i].neew = NULL;
-     }
-   This_Alt_Char = This_Color = 0;
-   Smg_Inited = 0;
-}
-
-
-static int init_smg (void)
-{
-   int i, len;
-   SLsmg_Char_Type *old, *neew;
-
-   Smg_Inited = 0;
-
-#ifdef REQUIRES_NON_BCE_SUPPORT
-   Bce_Color_Offset = _SLtt_get_bce_color_offset ();
-#endif
-
-   Screen_Rows = *tt_Screen_Rows;
-   if (Screen_Rows > MAX_SCREEN_SIZE)
-     Screen_Rows = MAX_SCREEN_SIZE;
-
-   Screen_Cols = *tt_Screen_Cols;
-
-   This_Col = This_Row = Start_Col = Start_Row = 0;
-
-   This_Alt_Char = 0;
-   SLsmg_set_color (0);
-   Cls_Flag = 1;
-#ifndef IBMPC_SYSTEM
-   init_alt_char_set ();
-#endif
-   len = Screen_Cols + 3;
-   for (i = 0; i < Screen_Rows; i++)
-     {
-	if ((NULL == (old = (SLsmg_Char_Type *) SLmalloc (sizeof(SLsmg_Char_Type) * len)))
-	    || ((NULL == (neew = (SLsmg_Char_Type *) SLmalloc (sizeof(SLsmg_Char_Type) * len)))))
-	  {
-	     SLfree ((char *) old);
-	     return -1;
-	  }
-	blank_line (old, len, ' ');
-	blank_line (neew, len, ' ');
-	SL_Screen[i].old = old;
-	SL_Screen[i].neew = neew;
-	SL_Screen[i].flags = 0;
-#ifndef IBMPC_SYSTEM
-	Blank_Hash = compute_hash (old, Screen_Cols);
-	SL_Screen[i].new_hash = SL_Screen[i].old_hash =  Blank_Hash;
-#endif
-     }
-   
-   _SLtt_color_changed_hook = SLsmg_touch_screen;
-   Screen_Trashed = 1;
-   Smg_Inited = 1;
-   return 0;
-}
-
-
-int SLsmg_init_smg (void)
-{
-   int ret;
-
-   BLOCK_SIGNALS;
-
-   if (Smg_Inited)
-     SLsmg_reset_smg ();
-
-   if (-1 == (*tt_init_video) ())
-     {
-	UNBLOCK_SIGNALS;
-	return -1;
-     }
-   
-   if (-1 == (ret = init_smg ()))
-     (void) (*tt_reset_video)();
-
-   UNBLOCK_SIGNALS;
-   return ret;
-}
-
-int SLsmg_reinit_smg (void)
-{
-   int ret;
-
-   if (Smg_Inited == 0)
-     return SLsmg_init_smg ();
-
-   BLOCK_SIGNALS;
-   reset_smg ();
-   ret = init_smg ();
-   UNBLOCK_SIGNALS;
-   return ret;
-}
-
-void SLsmg_reset_smg (void)
-{   
-   if (Smg_Inited == 0)
-     return;
-   
-   BLOCK_SIGNALS;
-
-   reset_smg ();
-   (*tt_reset_video)();
-
-   UNBLOCK_SIGNALS;
-}
-
-SLsmg_Char_Type SLsmg_char_at (void)
-{
-   if (Smg_Inited == 0) return 0;
-
-   if (point_visible (1))
-     {
-	return SL_Screen[This_Row - Start_Row].neew[This_Col - Start_Col];
-     }
-   return 0;
-}
-
-void SLsmg_vprintf (char *fmt, va_list ap)
-{
-   char buf[1024];
-
-   if (Smg_Inited == 0) return;
-
-   (void) _SLvsnprintf (buf, sizeof (buf), fmt, ap);
-   SLsmg_write_string (buf);
-}
-
-void SLsmg_printf (char *fmt, ...)
-{
-   va_list ap;
-   unsigned int len;
-   char *f;
-
-   if (Smg_Inited == 0) return;
-
-   va_start(ap, fmt);
-
-   f = fmt;
-   while (*f && (*f != '%'))
-     f++;
-   len = (unsigned int) (f - fmt);
-   if (len) SLsmg_write_nchars (fmt, len);
-
-   if (*f != 0)
-     SLsmg_vprintf (f, ap);
-
-   va_end (ap);
-}
-
-void SLsmg_set_screen_start (int *r, int *c)
-{
-   int orow = Start_Row, oc = Start_Col;
-
-   if (Smg_Inited == 0) return;
-
-   if (c == NULL) Start_Col = 0;
-   else
-     {
-	Start_Col = *c;
-	*c = oc;
-     }
-   if (r == NULL) Start_Row = 0;
-   else
-     {
-	Start_Row = *r;
-	*r = orow;
-     }
-}
-
-void SLsmg_draw_object (int r, int c, unsigned char object)
-{
-   This_Row = r;  This_Col = c;
-
-   if (Smg_Inited == 0) return;
-
-   if (point_visible (1))
-     {
-	int color = This_Color;
-	This_Color |= ALT_CHAR_FLAG;
-	SLsmg_write_char (object);
-	This_Color = color;
-     }
-
-   This_Col = c + 1;
-}
-
-void SLsmg_draw_hline (unsigned int n)
-{
-   static unsigned char hbuf[16];
-   int count;
-   int cmin, cmax;
-   int final_col = This_Col + (int) n;
-   int save_color;
-
-   if (Smg_Inited == 0) return;
-
-   if ((This_Row < Start_Row) || (This_Row >= Start_Row + Screen_Rows)
-       || (0 == compute_clip (This_Col, n, Start_Col, Start_Col + Screen_Cols,
-			      &cmin, &cmax)))
-     {
-	This_Col = final_col;
-	return;
-     }
-
-   if (hbuf[0] == 0)
-     {
-	SLMEMSET ((char *) hbuf, SLSMG_HLINE_CHAR, 16);
-     }
-
-   n = (unsigned int)(cmax - cmin);
-   count = n / 16;
-
-   save_color = This_Color;
-   This_Color |= ALT_CHAR_FLAG;
-   This_Col = cmin;
-
-   SLsmg_write_nchars ((char *) hbuf, n % 16);
-   while (count-- > 0)
-     {
-	SLsmg_write_nchars ((char *) hbuf, 16);
-     }
-
-   This_Color = save_color;
-   This_Col = final_col;
-}
-
-void SLsmg_draw_vline (int n)
-{
-   unsigned char ch = SLSMG_VLINE_CHAR;
-   int c = This_Col, rmin, rmax;
-   int final_row = This_Row + n;
-   int save_color;
-
-   if (Smg_Inited == 0) return;
-
-   if (((c < Start_Col) || (c >= Start_Col + Screen_Cols)) ||
-       (0 == compute_clip (This_Row, n, Start_Row, Start_Row + Screen_Rows,
-			  &rmin, &rmax)))
-     {
-	This_Row = final_row;
-	return;
-     }
-
-   save_color = This_Color;
-   This_Color |= ALT_CHAR_FLAG;
-
-   for (This_Row = rmin; This_Row < rmax; This_Row++)
-     {
-	This_Col = c;
-	SLsmg_write_nchars ((char *) &ch, 1);
-     }
-
-   This_Col = c;  This_Row = final_row;
-   This_Color = save_color;
-}
-
-void SLsmg_draw_box (int r, int c, unsigned int dr, unsigned int dc)
-{
-   if (Smg_Inited == 0) return;
-
-   if (!dr || !dc) return;
-   This_Row = r;  This_Col = c;
-   dr--; dc--;
-   SLsmg_draw_hline (dc);
-   SLsmg_draw_vline (dr);
-   This_Row = r;  This_Col = c;
-   SLsmg_draw_vline (dr);
-   SLsmg_draw_hline (dc);
-   SLsmg_draw_object (r, c, SLSMG_ULCORN_CHAR);
-   SLsmg_draw_object (r, c + (int) dc, SLSMG_URCORN_CHAR);
-   SLsmg_draw_object (r + (int) dr, c, SLSMG_LLCORN_CHAR);
-   SLsmg_draw_object (r + (int) dr, c + (int) dc, SLSMG_LRCORN_CHAR);
-   This_Row = r; This_Col = c;
-}
-
-void SLsmg_fill_region (int r, int c, unsigned int dr, unsigned int dc, unsigned char ch)
-{
-   static unsigned char hbuf[16];
-   int count;
-   int dcmax, rmax;
-
-   if (Smg_Inited == 0) return;
-
-   SLsmg_gotorc (r, c);
-   r = This_Row; c = This_Col;
-
-   dcmax = Screen_Cols - This_Col;
-   if (dcmax < 0)
-     return;
-
-   if (dc > (unsigned int) dcmax) dc = (unsigned int) dcmax;
-
-   rmax = This_Row + dr;
-   if (rmax > Screen_Rows) rmax = Screen_Rows;
-
-#if 0
-   ch = Alt_Char_Set[ch];
-#endif
-   if (ch != hbuf[0]) SLMEMSET ((char *) hbuf, (char) ch, 16);
-
-   for (This_Row = r; This_Row < rmax; This_Row++)
-     {
-	This_Col = c;
-	count = dc / 16;
-	SLsmg_write_nchars ((char *) hbuf, dc % 16);
-	while (count-- > 0)
-	  {
-	     SLsmg_write_nchars ((char *) hbuf, 16);
-	  }
-     }
-
-   This_Row = r;
-}
-
-void SLsmg_forward (int n)
-{
-   This_Col += n;
-}
-
-void SLsmg_write_color_chars (SLsmg_Char_Type *s, unsigned int len)
-{
-   SLsmg_Char_Type *smax, sh;
-   char buf[32], *b, *bmax;
-   int color, save_color;
-
-   if (Smg_Inited == 0) return;
-
-   smax = s + len;
-   b = buf;
-   bmax = b + sizeof (buf);
-
-   save_color = This_Color;
-
-   while (s < smax)
-     {
-	sh = *s++;
-
-	color = SLSMG_EXTRACT_COLOR(sh);
-
-#if REQUIRES_NON_BCE_SUPPORT
-	if (Bce_Color_Offset)
-	  {
-	     if (color & 0x80)
-	       color = ((color & 0x7F) + Bce_Color_Offset) | 0x80;
-	     else
-	       color = ((color & 0x7F) + Bce_Color_Offset) & 0x7F;
-	  }
-#endif
-
-	if ((color != This_Color) || (b == bmax))
-	  {
-	     if (b != buf)
-	       {
-		  SLsmg_write_nchars (buf, (int) (b - buf));
-		  b = buf;
-	       }
-	     This_Color = color;
-	  }
-	*b++ = (char) SLSMG_EXTRACT_CHAR(sh);
-     }
-
-   if (b != buf)
-     SLsmg_write_nchars (buf, (unsigned int) (b - buf));
-
-   This_Color = save_color;
-}
-
-unsigned int SLsmg_read_raw (SLsmg_Char_Type *buf, unsigned int len)
-{
-   unsigned int r, c;
-
-   if (Smg_Inited == 0) return 0;
-
-   if (0 == point_visible (1)) return 0;
-
-   r = (unsigned int) (This_Row - Start_Row);
-   c = (unsigned int) (This_Col - Start_Col);
-
-   if (c + len > (unsigned int) Screen_Cols)
-     len = (unsigned int) Screen_Cols - c;
-
-   memcpy ((char *) buf, (char *) (SL_Screen[r].neew + c), len * sizeof (SLsmg_Char_Type));
-   return len;
-}
-
-unsigned int SLsmg_write_raw (SLsmg_Char_Type *buf, unsigned int len)
-{
-   unsigned int r, c;
-   SLsmg_Char_Type *dest;
-
-   if (Smg_Inited == 0) return 0;
-
-   if (0 == point_visible (1)) return 0;
-
-   r = (unsigned int) (This_Row - Start_Row);
-   c = (unsigned int) (This_Col - Start_Col);
-
-   if (c + len > (unsigned int) Screen_Cols)
-     len = (unsigned int) Screen_Cols - c;
-
-   dest = SL_Screen[r].neew + c;
-
-   if (0 != memcmp ((char *) dest, (char *) buf, len * sizeof (SLsmg_Char_Type)))
-     {
-	memcpy ((char *) dest, (char *) buf, len * sizeof (SLsmg_Char_Type));
-	SL_Screen[r].flags |= TOUCHED;
-     }
-   return len;
-}
-
-void
-SLsmg_set_color_in_region (int color, int r, int c, unsigned int dr, unsigned int dc)
-{
-   int cmax, rmax;
-   SLsmg_Char_Type char_mask;
-
-   if (Smg_Inited == 0) return;
-
-   c -= Start_Col;
-   r -= Start_Row;
-
-   cmax = c + (int) dc;
-   rmax = r + (int) dr;
-
-   if (cmax > Screen_Cols) cmax = Screen_Cols;
-   if (rmax > Screen_Rows) rmax = Screen_Rows;
-
-   if (c < 0) c = 0;
-   if (r < 0) r = 0;
-
-#if REQUIRES_NON_BCE_SUPPORT
-   if (Bce_Color_Offset)
-     {
-	if (color & 0x80)
-	  color = ((color & 0x7F) + Bce_Color_Offset) | 0x80;
-	else
-	  color = ((color & 0x7F) + Bce_Color_Offset) & 0x7F;
-     }
-#endif
-   color = color << 8;
-
-   char_mask = 0xFF;
-
-#ifndef IBMPC_SYSTEM
-   if ((tt_Use_Blink_For_ACS == NULL)
-       || (0 == *tt_Use_Blink_For_ACS))
-     char_mask = 0x80FF;
-#endif
-
-   while (r < rmax)
-     {
-	SLsmg_Char_Type *s, *smax;
-
-	SL_Screen[r].flags |= TOUCHED;
-	s = SL_Screen[r].neew;
-	smax = s + cmax;
-	s += c;
-
-	while (s < smax)
-	  {
-	     *s = (*s & char_mask) | color;
-	     s++;
-	  }
-	r++;
-     }
-}
-
-void SLsmg_set_terminal_info (SLsmg_Term_Type *tt)
-{
-   if (tt == NULL)		       /* use default */
-     return;
-
-   if ((tt->tt_normal_video == NULL)
-       || (tt->tt_goto_rc == NULL)
-       || (tt->tt_cls == NULL)
-       || (tt->tt_del_eol == NULL)
-       || (tt->tt_smart_puts == NULL)
-       || (tt->tt_flush_output == NULL)
-       || (tt->tt_reset_video == NULL)
-       || (tt->tt_init_video == NULL)
-#ifndef IBMPC_SYSTEM
-       || (tt->tt_set_scroll_region == NULL)
-       || (tt->tt_reverse_index == NULL)
-       || (tt->tt_reset_scroll_region == NULL)
-       || (tt->tt_delete_nlines == NULL)
-       /* Variables */
-       || (tt->tt_term_cannot_scroll == NULL)
-       || (tt->tt_has_alt_charset == NULL)
-#if 0 /* These can be NULL */
-       || (tt->tt_use_blink_for_acs == NULL)
-       || (tt->tt_graphic_char_pairs == NULL)
-#endif
-       || (tt->tt_screen_cols == NULL)
-       || (tt->tt_screen_rows == NULL)
-#endif
-       )
-     SLang_exit_error ("Terminal not powerful enough for SLsmg");
-
-   tt_normal_video = tt->tt_normal_video;
-   tt_goto_rc = tt->tt_goto_rc;
-   tt_cls = tt->tt_cls;
-   tt_del_eol = tt->tt_del_eol;
-   tt_smart_puts = tt->tt_smart_puts;
-   tt_flush_output = tt->tt_flush_output;
-   tt_reset_video = tt->tt_reset_video;
-   tt_init_video = tt->tt_init_video;
-
-#ifndef IBMPC_SYSTEM
-   tt_set_scroll_region = tt->tt_set_scroll_region;
-   tt_reverse_index = tt->tt_reverse_index;
-   tt_reset_scroll_region = tt->tt_reset_scroll_region;
-   tt_delete_nlines = tt->tt_delete_nlines;
-
-   tt_Term_Cannot_Scroll = tt->tt_term_cannot_scroll;
-   tt_Has_Alt_Charset = tt->tt_has_alt_charset;
-   tt_Use_Blink_For_ACS = tt->tt_use_blink_for_acs;
-   tt_Graphics_Char_Pairs = tt->tt_graphic_char_pairs;
-#endif
-
-   tt_Screen_Cols = tt->tt_screen_cols;
-   tt_Screen_Rows = tt->tt_screen_rows;
-}
-
diff --git a/mdk-stage1/slang/slstd.c b/mdk-stage1/slang/slstd.c
deleted file mode 100644
index b05dfcddb..000000000
--- a/mdk-stage1/slang/slstd.c
+++ /dev/null
@@ -1,724 +0,0 @@
-/* -*- mode: C; mode: fold; -*- */
-/* Standard intrinsic functions for S-Lang.  Included here are string
-   and array operations */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-/*{{{ Include Files */
-
-#include <time.h>
-
-#ifndef __QNX__
-# if defined(__GO32__) || defined(__WATCOMC__)
-#  include <dos.h>
-#  include <bios.h>
-# endif
-#endif
-
-#if SLANG_HAS_FLOAT
-# include <math.h>
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-/*}}}*/
-
-/* builtin stack manipulation functions */
-int SLdo_pop(void) /*{{{*/
-{
-   return SLdo_pop_n (1);
-}
-
-/*}}}*/
-
-int SLdo_pop_n (unsigned int n)
-{
-   SLang_Object_Type x;
-
-   while (n--)
-     {
-	if (SLang_pop(&x)) return -1;
-	SLang_free_object (&x);
-     }
-
-   return 0;
-}
-
-static void do_dup(void) /*{{{*/
-{
-   (void) SLdup_n (1);
-}
-
-/*}}}*/
-
-static int length_cmd (void)
-{
-   SLang_Class_Type *cl;
-   SLang_Object_Type obj;
-   VOID_STAR p;
-   unsigned int length;
-   int len;
-
-   if (-1 == SLang_pop (&obj))
-     return -1;
-
-   cl = _SLclass_get_class (obj.data_type);
-   p = _SLclass_get_ptr_to_value (cl, &obj);
-
-   len = 1;
-   if (cl->cl_length != NULL)
-     {
-	if (0 == (*cl->cl_length)(obj.data_type, p, &length))
-	  len = (int) length;
-	else
-	  len = -1;
-     }
-
-   SLang_free_object (&obj);
-   return len;
-}
-
-/* convert integer to a string of length 1 */
-static void char_cmd (int *x) /*{{{*/
-{
-   char ch, buf[2];
-
-   ch = (char) *x;
-   buf[0] = ch;
-   buf[1] = 0;
-   SLang_push_string (buf);
-}
-
-/*}}}*/
-
-/* format object into a string and returns slstring */
-char *_SLstringize_object (SLang_Object_Type *obj) /*{{{*/
-{
-   SLang_Class_Type *cl;
-   unsigned char stype;
-   VOID_STAR p;
-   char *s, *s1;
-
-   stype = obj->data_type;
-   p = (VOID_STAR) &obj->v.ptr_val;
-
-   cl = _SLclass_get_class (stype);
-
-   s = (*cl->cl_string) (stype, p);
-   if (s != NULL)
-     {
-	s1 = SLang_create_slstring (s);
-	SLfree (s);
-	s = s1;
-     }
-   return s;
-}
-/*}}}*/
-
-int SLang_run_hooks(char *hook, unsigned int num_args, ...)
-{
-   unsigned int i;
-   va_list ap;
-
-   if (SLang_Error) return -1;
-
-   if (0 == SLang_is_defined (hook))
-     return 0;
-
-   (void) SLang_start_arg_list ();
-   va_start (ap, num_args);
-   for (i = 0; i < num_args; i++)
-     {
-	char *arg;
-
-	arg = va_arg (ap, char *);
-	if (-1 == SLang_push_string (arg))
-	  break;
-     }
-   va_end (ap);
-   (void) SLang_end_arg_list ();
-
-   if (SLang_Error) return -1;
-   return SLang_execute_function (hook);
-}
-
-static void intrin_getenv_cmd (char *s)
-{
-   SLang_push_string (getenv (s));
-}
-
-#ifdef HAVE_PUTENV
-static void intrin_putenv (void) /*{{{*/
-{
-   char *s;
-
-   /* Some putenv implementations required malloced strings. */
-   if (SLpop_string(&s)) return;
-
-   if (putenv (s))
-     {
-	SLang_Error = SL_INTRINSIC_ERROR;
-	SLfree (s);
-     }
-
-   /* Note that s is NOT freed */
-}
-
-/*}}}*/
-
-#endif
-
-static void lang_print_stack (void) /*{{{*/
-{
-   char buf[32];
-   unsigned int n;
-
-   n = (unsigned int) (_SLStack_Pointer - _SLRun_Stack);
-   while (n)
-     {
-	n--;
-	sprintf (buf, "(%u)", n);
-	_SLdump_objects (buf, _SLRun_Stack + n, 1, 1);
-     }
-}
-
-/*}}}*/
-
-static void byte_compile_file (char *f, int *m)
-{
-   SLang_byte_compile_file (f, *m);
-}
-
-static void intrin_type_info1 (void)
-{
-   SLang_Object_Type obj;
-   unsigned int type;
-
-   if (-1 == SLang_pop (&obj))
-     return;
-
-   type = obj.data_type;
-   if (type == SLANG_ARRAY_TYPE)
-     type = obj.v.array_val->data_type;
-
-   SLang_free_object (&obj);
-
-   _SLang_push_datatype (type);
-}
-
-static void intrin_type_info (void)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == SLang_pop (&obj))
-     return;
-
-   _SLang_push_datatype (obj.data_type);
-   SLang_free_object (&obj);
-}
-
-void _SLstring_intrinsic (void) /*{{{*/
-{
-   SLang_Object_Type x;
-   char *s;
-
-   if (SLang_pop (&x)) return;
-   if (NULL != (s = _SLstringize_object (&x)))
-     _SLang_push_slstring (s);
-
-   SLang_free_object (&x);
-}
-
-/*}}}*/
-
-static void intrin_typecast (void)
-{
-   unsigned char to_type;
-   if (0 == _SLang_pop_datatype (&to_type))
-     (void) SLclass_typecast (to_type, 0, 1);
-}
-
-#if SLANG_HAS_FLOAT
-static void intrin_double (void)
-{
-   (void) SLclass_typecast (SLANG_DOUBLE_TYPE, 0, 1);
-}
-
-#endif
-
-static void intrin_int (void) /*{{{*/
-{
-   (void) SLclass_typecast (SLANG_INT_TYPE, 0, 1);
-}
-
-/*}}}*/
-
-static char *
-intrin_function_name (void)
-{
-   if (NULL == _SLang_Current_Function_Name)
-     return "";
-   return _SLang_Current_Function_Name;
-}
-
-static void intrin_message (char *s)
-{
-   SLang_vmessage ("%s", s);
-}
-
-static void intrin_error (char *s)
-{
-   SLang_verror (SL_USER_ERROR, "%s", s);
-}
-
-static void intrin_pop_n (int *n)
-{
-   SLdo_pop_n ((unsigned int) *n);
-}
-
-static void intrin_reverse_stack (int *n)
-{
-   SLreverse_stack (*n);
-}
-
-static void intrin_roll_stack (int *n)
-{
-   SLroll_stack (*n);
-}
-
-static void usage (void)
-{
-   char *msg;
-
-   _SLstrops_do_sprintf_n (SLang_Num_Function_Args - 1);   /* do not include format */
-
-   if (-1 == SLang_pop_slstring (&msg))
-     return;
-
-   SLang_verror (SL_USAGE_ERROR, "Usage: %s", msg);
-   SLang_free_slstring (msg);
-}
-
-/* Convert string to integer */
-static int intrin_integer (char *s)
-{
-   int i;
-
-   i = SLatoi ((unsigned char *) s);
-
-   if (SLang_Error)
-     SLang_verror (SL_TYPE_MISMATCH, "Unable to convert string to integer");
-   return i;
-}
-/*}}}*/
-
-static void guess_type (char *s)
-{
-   _SLang_push_datatype (SLang_guess_type(s));
-}
-
-static int load_file (char *s)
-{
-   if (-1 == SLang_load_file (s))
-     return 0;
-   return 1;
-}
-
-static void get_doc_string (char *file, char *topic)
-{
-   FILE *fp;
-   char line[1024];
-   unsigned int topic_len, str_len;
-   char *str;
-   char ch;
-
-   if (NULL == (fp = fopen (file, "r")))
-     {
-	SLang_push_null ();
-	return;
-     }
-
-   topic_len = strlen (topic);
-   ch = *topic;
-
-   while (1)
-     {
-	if (NULL == fgets (line, sizeof(line), fp))
-	  {
-	     fclose (fp);
-	     (void) SLang_push_null ();
-	     return;
-	  }
-
-	if ((ch == *line)
-	    && (0 == strncmp (line, topic, topic_len))
-	    && ((line[topic_len] == '\n') || (line [topic_len] == 0)
-		|| (line[topic_len] == ' ') || (line[topic_len] == '\t')))
-	  break;
-     }
-
-   if (NULL == (str = SLmake_string (line)))
-     {
-	fclose (fp);
-	(void) SLang_push_null ();
-	return;
-     }
-   str_len = strlen (str);
-
-   while (NULL != fgets (line, sizeof (line), fp))
-     {
-	unsigned int len;
-	char *new_str;
-
-	ch = *line;
-	if (ch == '#') continue;
-	if (ch == '-') break;
-
-	len = strlen (line);
-	if (NULL == (new_str = SLrealloc (str, str_len + len + 1)))
-	  {
-	     SLfree (str);
-	     str = NULL;
-	     break;
-	  }
-	str = new_str;
-	strcpy (str + str_len, line);
-	str_len += len;
-     }
-
-   fclose (fp);
-
-   (void) SLang_push_malloced_string (str);
-}
-
-static int push_string_array_elements (SLang_Array_Type *at)
-{
-   char **strs;
-   unsigned int num;
-   unsigned int i;
-
-   if (at == NULL)
-     return -1;
-   
-   strs = (char **)at->data;
-   num = at->num_elements;
-   for (i = 0; i < num; i++)
-     {
-	if (-1 == SLang_push_string (strs[i]))
-	  {
-	     SLdo_pop_n (i);
-	     return -1;
-	  }
-     }
-   SLang_push_integer ((int) num);
-   return 0;
-}
-
-	
-static void intrin_apropos (void)
-{
-   int num_args;
-   char *pat;
-   char *namespace_name;
-   unsigned int flags;
-   SLang_Array_Type *at;
-
-   num_args = SLang_Num_Function_Args;
-
-   if (-1 == SLang_pop_uinteger (&flags))
-     return;
-   if (-1 == SLang_pop_slstring (&pat))
-     return;
-   
-   namespace_name = NULL;
-   at = NULL;
-   if (num_args == 3)
-     {
-	if (-1 == SLang_pop_slstring (&namespace_name))
-	  goto free_and_return;
-     }
-
-   at = _SLang_apropos (namespace_name, pat, flags);
-   if (num_args == 3)
-     {
-	(void) SLang_push_array (at, 0);
-	goto free_and_return;
-     }
-
-   /* Maintain compatibility with old version of the function.  That version
-    * did not take three arguments and returned everything to the stack.
-    * Yuk.
-    */
-   (void) push_string_array_elements (at);
-
-   free_and_return:
-   /* NULLs ok */
-   SLang_free_slstring (namespace_name);
-   SLang_free_slstring (pat);
-   SLang_free_array (at);
-}
-
-static int intrin_get_defines (void)
-{
-   int n = 0;
-   char **s = _SLdefines;
-
-   while (*s != NULL)
-     {
-	if (-1 == SLang_push_string (*s))
-	  {
-	     SLdo_pop_n ((unsigned int) n);
-	     return -1;
-	  }
-	s++;
-	n++;
-     }
-   return n;
-}
-
-static void intrin_get_reference (char *name)
-{
-   _SLang_push_ref (1, (VOID_STAR) _SLlocate_name (name));
-}
-
-#ifdef HAVE_SYS_UTSNAME_H
-# include <sys/utsname.h>
-#endif
-
-static void uname_cmd (void)
-{
-#ifdef HAVE_UNAME
-   struct utsname u;
-   char *field_names [6];
-   unsigned char field_types[6];
-   VOID_STAR field_values [6];
-   char *ptrs[6];
-   int i;
-
-   if (-1 == uname (&u))
-     (void) SLang_push_null ();
-
-   field_names[0] = "sysname"; ptrs[0] = u.sysname;
-   field_names[1] = "nodename"; ptrs[1] = u.nodename;
-   field_names[2] = "release"; ptrs[2] = u.release;
-   field_names[3] = "version"; ptrs[3] = u.version;
-   field_names[4] = "machine"; ptrs[4] = u.machine;
-
-   for (i = 0; i < 5; i++)
-     {
-	field_types[i] = SLANG_STRING_TYPE;
-	field_values[i] = (VOID_STAR) &ptrs[i];
-     }
-
-   if (0 == SLstruct_create_struct (5, field_names, field_types, field_values))
-     return;
-#endif
-
-   SLang_push_null ();
-}
-
-static void uninitialize_ref_intrin (SLang_Ref_Type *ref)
-{
-   (void) _SLang_uninitialize_ref (ref);
-}
-
-static SLang_Intrin_Fun_Type SLang_Basic_Table [] = /*{{{*/
-{
-   MAKE_INTRINSIC_1("__is_initialized", _SLang_is_ref_initialized, SLANG_INT_TYPE, SLANG_REF_TYPE),
-   MAKE_INTRINSIC_S("__get_reference", intrin_get_reference, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_1("__uninitialize", uninitialize_ref_intrin, SLANG_VOID_TYPE, SLANG_REF_TYPE),
-   MAKE_INTRINSIC_SS("get_doc_string_from_file",  get_doc_string, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SS("autoload",  SLang_autoload, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("is_defined",  SLang_is_defined, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_0("string",  _SLstring_intrinsic, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("uname", uname_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("getenv",  intrin_getenv_cmd, SLANG_VOID_TYPE),
-#ifdef HAVE_PUTENV
-   MAKE_INTRINSIC_0("putenv",  intrin_putenv, SLANG_VOID_TYPE),
-#endif
-   MAKE_INTRINSIC_S("evalfile",  load_file, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_I("char",  char_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("eval",  SLang_load_string, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("dup",  do_dup, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("integer",  intrin_integer, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_S("system",  SLsystem, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_0("_apropos",  intrin_apropos, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("_trace_function",  _SLang_trace_fun, SLANG_VOID_TYPE),
-#if SLANG_HAS_FLOAT
-   MAKE_INTRINSIC_S("atof", _SLang_atof, SLANG_DOUBLE_TYPE),
-   MAKE_INTRINSIC_0("double", intrin_double, SLANG_VOID_TYPE),
-#endif
-   MAKE_INTRINSIC_0("int",  intrin_int, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("typecast", intrin_typecast, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("_stkdepth", _SLstack_depth, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_I("_stk_reverse", intrin_reverse_stack, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("typeof", intrin_type_info, VOID_TYPE),
-   MAKE_INTRINSIC_0("_typeof", intrin_type_info1, VOID_TYPE),
-   MAKE_INTRINSIC_I("_pop_n", intrin_pop_n, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("_print_stack", lang_print_stack, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_I("_stk_roll", intrin_roll_stack, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SI("byte_compile_file", byte_compile_file, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("_clear_error", _SLang_clear_error, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("_function_name", intrin_function_name, SLANG_STRING_TYPE),
-#if SLANG_HAS_FLOAT
-   MAKE_INTRINSIC_S("set_float_format", _SLset_double_format, SLANG_VOID_TYPE),
-#endif
-   MAKE_INTRINSIC_S("_slang_guess_type", guess_type, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("error", intrin_error, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("message", intrin_message, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("__get_defined_symbols", intrin_get_defines, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_I("__pop_args", _SLstruct_pop_args, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_1("__push_args", _SLstruct_push_args, SLANG_VOID_TYPE, SLANG_ARRAY_TYPE),
-   MAKE_INTRINSIC_0("usage", usage, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("implements", _SLang_implements_intrinsic, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("use_namespace", _SLang_use_namespace_intrinsic, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("current_namespace", _SLang_cur_namespace_intrinsic, SLANG_STRING_TYPE),
-   MAKE_INTRINSIC_0("length", length_cmd, SLANG_INT_TYPE),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-/*}}}*/
-
-#ifdef SLANG_DOC_DIR
-char *SLang_Doc_Dir = SLANG_DOC_DIR;
-#else
-char *SLang_Doc_Dir = "";
-#endif
-
-static SLang_Intrin_Var_Type Intrin_Vars[] =
-{
-   MAKE_VARIABLE("_debug_info", &_SLang_Compile_Line_Num_Info, SLANG_INT_TYPE, 0),
-   MAKE_VARIABLE("_auto_declare", &_SLang_Auto_Declare_Globals, SLANG_INT_TYPE, 0),
-   MAKE_VARIABLE("_traceback", &SLang_Traceback, SLANG_INT_TYPE, 0),
-   MAKE_VARIABLE("_slangtrace", &_SLang_Trace, SLANG_INT_TYPE, 0),
-   MAKE_VARIABLE("_slang_version", &SLang_Version, SLANG_INT_TYPE, 1),
-   MAKE_VARIABLE("_slang_version_string", &SLang_Version_String, SLANG_STRING_TYPE, 1),
-   MAKE_VARIABLE("_NARGS", &SLang_Num_Function_Args, SLANG_INT_TYPE, 1),
-   MAKE_VARIABLE("_slang_doc_dir", &SLang_Doc_Dir, SLANG_STRING_TYPE, 1),
-   MAKE_VARIABLE("NULL", NULL, SLANG_NULL_TYPE, 1),
-   SLANG_END_INTRIN_VAR_TABLE
-};
-
-int SLang_init_slang (void) /*{{{*/
-{
-   char name[3];
-   unsigned int i;
-   char **s;
-   static char *sys_defines [] =
-     {
-#if defined(__os2__)
-	"OS2",
-#endif
-#if defined(__MSDOS__)
-	"MSDOS",
-#endif
-#if defined(__WIN16__)
-	"WIN16",
-#endif
-#if defined (__WIN32__)
-	"WIN32",
-#endif
-#if defined(__NT__)
-	"NT",
-#endif
-#if defined (VMS)
-	"VMS",
-#endif
-#ifdef REAL_UNIX_SYSTEM
-	"UNIX",
-#endif
-#if SLANG_HAS_FLOAT
-	"SLANG_DOUBLE_TYPE",
-#endif
-	NULL
-     };
-
-   if (-1 == _SLregister_types ()) return -1;
-
-   if ((-1 == SLadd_intrin_fun_table(SLang_Basic_Table, NULL))
-       || (-1 == SLadd_intrin_var_table (Intrin_Vars, NULL))
-       || (-1 == _SLang_init_slstrops ())
-       || (-1 == _SLang_init_sltime ())
-       || (-1 == _SLstruct_init ())
-#if SLANG_HAS_COMPLEX
-       || (-1 == _SLinit_slcomplex ())
-#endif
-#if SLANG_HAS_ASSOC_ARRAYS
-       || (-1 == SLang_init_slassoc ())
-#endif
-       )
-     return -1;
-
-   SLadd_global_variable (SLANG_SYSTEM_NAME);
-
-   s = sys_defines;
-   while (*s != NULL)
-     {
-	if (-1 == SLdefine_for_ifdef (*s)) return -1;
-	s++;
-     }
-
-   /* give temp global variables $0 --> $9 */
-   name[2] = 0; name[0] = '$';
-   for (i = 0; i < 10; i++)
-     {
-	name[1] = (char) (i + '0');
-	SLadd_global_variable (name);
-     }
-
-   SLang_init_case_tables ();
-
-   /* Now add a couple of macros */
-   SLang_load_string (".(_NARGS 1 - Sprintf error)verror");
-   SLang_load_string (".(_NARGS 1 - Sprintf message)vmessage");
-
-   if (SLang_Error)
-     return -1;
-
-   return 0;
-}
-
-/*}}}*/
-
-int SLang_set_argc_argv (int argc, char **argv)
-{
-   static int this_argc;
-   static char **this_argv;
-   int i;
-
-   if (argc < 0) argc = 0;
-   this_argc = argc;
-
-   if (NULL == (this_argv = (char **) SLmalloc ((argc + 1) * sizeof (char *))))
-     return -1;
-   memset ((char *) this_argv, 0, sizeof (char *) * (argc + 1));
-
-   for (i = 0; i < argc; i++)
-     {
-	if (NULL == (this_argv[i] = SLang_create_slstring (argv[i])))
-	  goto return_error;
-     }
-
-   if (-1 == SLadd_intrinsic_variable ("__argc", (VOID_STAR)&this_argc,
-				       SLANG_INT_TYPE, 1))
-     goto return_error;
-
-   if (-1 == SLang_add_intrinsic_array ("__argv", SLANG_STRING_TYPE, 1,
-					(VOID_STAR) this_argv, 1, argc))
-     goto return_error;
-
-   return 0;
-
-   return_error:
-   for (i = 0; i < argc; i++)
-     SLang_free_slstring (this_argv[i]);   /* NULL ok */
-   SLfree ((char *) this_argv);
-
-   return -1;
-}
diff --git a/mdk-stage1/slang/slstdio.c b/mdk-stage1/slang/slstdio.c
deleted file mode 100644
index 05db1af77..000000000
--- a/mdk-stage1/slang/slstdio.c
+++ /dev/null
@@ -1,1050 +0,0 @@
-/* file stdio intrinsics for S-Lang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#if defined(__unix__) || (defined (__os2__) && defined (__EMX__))
-# include <sys/types.h>
-#endif
-
-#ifdef HAVE_FCNTL_H
-# include <fcntl.h>
-#endif
-#ifdef HAVE_SYS_FCNTL_H
-# include <sys/fcntl.h>
-#endif
-
-#ifdef __unix__
-# include <sys/file.h>
-#endif
-
-#if defined(__BORLANDC__)
-# include <io.h>
-# include <dir.h>
-#endif
-
-#if defined(__DECC) && defined(VMS)
-# include <unixio.h>
-# include <unixlib.h>
-#endif
-
-#ifdef VMS
-# include <stat.h>
-#else
-# include <sys/stat.h>
-#endif
-
-#include <errno.h>
-
-#define SL_APP_WANTS_FOREACH
-#include "slang.h"
-#include "_slang.h"
-
-typedef struct
-{
-   FILE *fp;			       /* kind of obvious */
-   char *file;			       /* file name associated with pointer */
-
-   unsigned int flags;		       /* modes, etc... */
-#define SL_READ		0x0001
-#define SL_WRITE	0x0002
-#define SL_BINARY	0x0004
-#define SL_FDOPEN	0x2000
-#define SL_PIPE		0x4000
-#define SL_INUSE	0x8000
-}
-SL_File_Table_Type;
-
-static SL_File_Table_Type *SL_File_Table;
-
-static SL_File_Table_Type *get_free_file_table_entry (void)
-{
-   SL_File_Table_Type *t = SL_File_Table, *tmax;
-
-   tmax = t + SL_MAX_FILES;
-   while (t < tmax)
-     {
-	if (t->flags == 0)
-	  {
-	     memset ((char *) t, 0, sizeof (SL_File_Table_Type));
-	     return t;
-	  }
-	t++;
-     }
-
-   return NULL;
-}
-
-static unsigned int file_process_flags (char *mode)
-{
-   char ch;
-   unsigned int flags = 0;
-
-   while (1)
-     {
-	ch = *mode++;
-	switch (ch)
-	  {
-	   case 'r': flags |= SL_READ;
-	     break;
-	   case 'w':
-	   case 'a':
-	   case 'A':
-	     flags |= SL_WRITE;
-	     break;
-	   case '+': flags |= SL_WRITE | SL_READ;
-	     break;
-	   case 'b': flags |= SL_BINARY;
-	     break;
-	   case 0:
-	     return flags;
-
-	   default:
-	     SLang_verror (SL_INVALID_PARM, "File flag %c is not supported", ch);
-	     return 0;
-	  }
-     }
-}
-
-static int open_file_type (char *file, int fd, char *mode,
-			   FILE *(*open_fun)(char *, char *),
-			   int (*close_fun)(FILE *),
-			   unsigned int xflags)
-{
-   FILE *fp;
-   SL_File_Table_Type *t;
-   unsigned int flags;
-   SLang_MMT_Type *mmt;
-
-   fp = NULL;
-   t = NULL;
-   mmt = NULL;
-
-   if ((NULL == (t = get_free_file_table_entry ()))
-       || (0 == (flags = file_process_flags(mode))))
-     goto return_error;
-   
-   if (fd != -1)
-     fp = fdopen (fd, mode);
-   else
-     fp = open_fun (file, mode);
-
-   if (fp == NULL)
-     {
-	_SLerrno_errno = errno;
-	goto return_error;
-     }
-
-   if (NULL == (mmt = SLang_create_mmt (SLANG_FILE_PTR_TYPE, (VOID_STAR) t)))
-     goto return_error;
-
-   t->fp = fp;
-   t->flags = flags | xflags;
-   fp = NULL;			       /* allow free_mmt to close fp */
-
-   if ((NULL != (t->file = SLang_create_slstring (file)))
-       && (0 == SLang_push_mmt (mmt)))
-     return 0;
-
-   /* drop */
-
-   return_error:
-   if (fp != NULL) (*close_fun) (fp);
-   if (mmt != NULL) SLang_free_mmt (mmt);
-   (void) SLang_push_null ();
-   return -1;
-}
-
-/* Since some compilers do not have popen/pclose prototyped and in scope,
- * and pc compilers sometimes have silly prototypes involving PASCAL, etc.
- * use wrappers around the function to avoid compilation errors.
- */
-
-static FILE *fopen_fun (char *f, char *m)
-{
-   return fopen (f, m);
-}
-static int fclose_fun (FILE *fp)
-{
-   return fclose (fp);
-}
-
-static void stdio_fopen (char *file, char *mode)
-{
-   (void) open_file_type (file, -1, mode, fopen_fun, fclose_fun, 0);
-}
-
-int _SLstdio_fdopen (char *file, int fd, char *mode)
-{
-   if (fd == -1)
-     {
-	_SLerrno_errno = EBADF;
-	(void) SLang_push_null ();
-	return -1;
-     }
-
-   return open_file_type (file, fd, mode, NULL, fclose_fun, SL_FDOPEN);
-}
-
-#ifdef HAVE_POPEN
-static int pclose_fun (FILE *fp)
-{
-   return pclose (fp);
-}
-
-static FILE *popen_fun (char *file, char *mode)
-{
-   return popen (file, mode);
-}
-
-static void stdio_popen (char *file, char *mode)
-{
-   (void) open_file_type (file, -1, mode, popen_fun, pclose_fun, SL_PIPE);
-}
-#endif
-
-/* returns pointer to file entry if it is open and consistent with
-   flags.  Returns NULL otherwise */
-static SLang_MMT_Type *pop_fp (unsigned int flags, FILE **fp_ptr)
-{
-   SL_File_Table_Type *t;
-   SLang_MMT_Type *mmt;
-
-   *fp_ptr = NULL;
-
-   if (NULL == (mmt = SLang_pop_mmt (SLANG_FILE_PTR_TYPE)))
-     return NULL;
-
-   t = (SL_File_Table_Type *) SLang_object_from_mmt (mmt);
-   if ((t->flags & flags)
-       && (NULL != (*fp_ptr = t->fp)))
-     return mmt;
-
-   SLang_free_mmt (mmt);
-   return NULL;
-}
-
-static FILE *check_fp (SL_File_Table_Type *t, unsigned flags)
-{
-   if ((t != NULL) && (t->flags & flags))
-     return t->fp;
-
-   return NULL;
-}
-
-char *SLang_get_name_from_fileptr (SLang_MMT_Type *mmt)
-{
-   SL_File_Table_Type *ft;
-
-   ft = (SL_File_Table_Type *) SLang_object_from_mmt (mmt);
-   if (ft == NULL)
-     return NULL;
-   return ft->file;
-}
-
-int SLang_pop_fileptr (SLang_MMT_Type **mmt, FILE **fp)
-{
-   if (NULL == (*mmt = pop_fp (0xFFFF, fp)))
-     {
-#ifdef EBADF
-	_SLerrno_errno = EBADF;
-#endif
-	return -1;
-     }
-
-   return 0;
-}
-
-static int close_file_type (SL_File_Table_Type *t)
-{
-   int ret = 0;
-   FILE *fp;
-
-   if (t == NULL)
-     return -1;
-
-   fp = t->fp;
-
-   if (NULL == fp) ret = -1;
-   else
-     {
-	if (0 == (t->flags & SL_PIPE))
-	  {
-	     if (EOF == (ret = fclose (fp)))
-	       _SLerrno_errno = errno;
-	  }
-#ifdef HAVE_POPEN
-	else
-	  {
-	     if (-1 == (ret = pclose (fp)))
-	       _SLerrno_errno = errno;
-	  }
-#endif
-     }
-
-   if (t->file != NULL) SLang_free_slstring (t->file);
-   memset ((char *) t, 0, sizeof (SL_File_Table_Type));
-   return ret;
-}
-
-static int stdio_fclose (SL_File_Table_Type *t)
-{
-   int ret;
-
-   if (NULL == check_fp (t, 0xFFFF))
-     return -1;
-
-   ret = close_file_type (t);
-
-   t->flags = SL_INUSE;
-   return ret;
-}
-
-static int read_one_line (FILE *fp, char **strp, unsigned int *lenp)
-{
-   char buf[512];
-   char *str;
-   unsigned int len;
-
-   *strp = NULL;
-   len = 0;
-   str = NULL;
-
-   while (NULL != fgets (buf, sizeof (buf), fp))
-     {
-	unsigned int dlen;
-	char *new_str;
-	int done_flag;
-
-	dlen = strlen (buf);
-	/* Note: If the file contains embedded \0 characters, then this
-	 * fails to work properly since dlen will not be correct.
-	 */
-	done_flag = ((dlen + 1 < sizeof (buf))
-		     || (buf[dlen - 1] == '\n'));
-
-	if (done_flag && (str == NULL))
-	  {
-	     /* Avoid the malloc */
-	     str = buf;
-	     len = dlen;
-	     break;
-	  }
-
-	if (NULL == (new_str = SLrealloc (str, len + dlen + 1)))
-	  {
-	     SLfree (str);
-	     return -1;
-	  }
-
-	str = new_str;
-	strcpy (str + len, buf);
-	len += dlen;
-
-	if (done_flag) break;
-     }
-
-   if (str == NULL)
-     return 0;
-
-   *strp = SLang_create_nslstring (str, len);
-   if (str != buf) SLfree (str);
-
-   if (*strp == NULL) return -1;
-
-   *lenp = len;
-   return 1;
-}
-
-/* returns number of characters read and pushes the string to the stack.
-   If it fails, it returns -1 */
-static int stdio_fgets (SLang_Ref_Type *ref, SL_File_Table_Type *t)
-{
-   char *s;
-   unsigned int len;
-   FILE *fp;
-   int status;
-
-   if (NULL == (fp = check_fp (t, SL_READ)))
-     return -1;
-
-   status = read_one_line (fp, &s, &len);
-   if (status <= 0)
-     return -1;
-
-   status = SLang_assign_to_ref (ref, SLANG_STRING_TYPE, (VOID_STAR)&s);
-   SLang_free_slstring (s);
-
-   if (status == -1)
-     return -1;
-
-   return (int) len;
-}
-
-static void stdio_fgetslines_internal (FILE *fp, unsigned int n)
-{
-   unsigned int num_lines, max_num_lines;
-   char **list;
-   SLang_Array_Type *at;
-   int inum_lines;
-
-   if (n > 1024)
-     max_num_lines = 1024;
-   else 
-     {
-	max_num_lines = n;
-	if (max_num_lines == 0)
-	  max_num_lines++;
-     }
-
-   list = (char **) SLmalloc (sizeof (char *) * max_num_lines);
-   if (list == NULL)
-     return;
-
-   num_lines = 0;
-   while (num_lines < n)
-     {
-	int status;
-	char *line;
-	unsigned int len;
-
-	status = read_one_line (fp, &line, &len);
-	if (status == -1)
-	  goto return_error;
-
-	if (status == 0)
-	  break;
-
-	if (max_num_lines == num_lines)
-	  {
-	     char **new_list;
-
-	     if (max_num_lines + 4096 > n)
-	       max_num_lines = n;
-	     else
-	       max_num_lines += 4096;
-
-	     new_list = (char **) SLrealloc ((char *)list, sizeof (char *) * max_num_lines);
-	     if (new_list == NULL)
-	       {
-		  SLang_free_slstring (line);
-		  goto return_error;
-	       }
-	     list = new_list;
-	  }
-
-	list[num_lines] = line;
-	num_lines++;
-     }
-
-   if (num_lines != max_num_lines)
-     {
-	char **new_list;
-
-	new_list = (char **)SLrealloc ((char *)list, sizeof (char *) * (num_lines + 1));
-	if (new_list == NULL)
-	  goto return_error;
-
-	list = new_list;
-     }
-
-   inum_lines = (int) num_lines;
-   if (NULL == (at = SLang_create_array (SLANG_STRING_TYPE, 0, (VOID_STAR) list, &inum_lines, 1)))
-     goto return_error;
-
-   if (-1 == SLang_push_array (at, 1))
-     SLang_push_null ();
-   return;
-
-   return_error:
-   while (num_lines > 0)
-     {
-	num_lines--;
-	SLfree (list[num_lines]);
-     }
-   SLfree ((char *)list);
-   SLang_push_null ();
-}
-
-static void stdio_fgetslines (void)
-{
-   unsigned int n;
-   FILE *fp;
-   SLang_MMT_Type *mmt;
-
-   n = (unsigned int)-1;
-
-   if (SLang_Num_Function_Args == 2)
-     {
-	if (-1 == SLang_pop_uinteger (&n))
-	  return;
-     }
-   
-   if (NULL == (mmt = pop_fp (SL_READ, &fp)))
-     {
-	SLang_push_null ();
-	return;
-     }
-
-   stdio_fgetslines_internal (fp, n);
-   SLang_free_mmt (mmt);
-}
-
-
-static int stdio_fputs (char *s, SL_File_Table_Type *t)
-{
-   FILE *fp;
-
-   if (NULL == (fp = check_fp (t, SL_WRITE)))
-     return -1;
-
-   if (EOF == fputs(s, fp)) return -1;
-   return (int) strlen (s);
-}
-
-static int stdio_fflush (SL_File_Table_Type *t)
-{
-   FILE *fp;
-
-   if (NULL == (fp = check_fp (t, SL_WRITE)))
-     return -1;
-
-   if (EOF == fflush (fp))
-     {
-	_SLerrno_errno = errno;
-	return -1;
-     }
-
-   return 0;
-}
-
-/* Usage: n = fread (&str, data-type, nelems, fp); */
-static void stdio_fread (SLang_Ref_Type *ref, int *data_typep, unsigned int *num_elemns, SL_File_Table_Type *t)
-{
-   char *s;
-   FILE *fp;
-   int ret;
-   unsigned int num_read, num_to_read;
-   unsigned int nbytes;
-   SLang_Class_Type *cl;
-   unsigned int sizeof_type;
-   int data_type;
-
-   ret = -1;
-   s = NULL;
-   cl = NULL;
-
-   if (NULL == (fp = check_fp (t, SL_READ)))
-     goto the_return;
-
-   /* FIXME: priority = low : I should add some mechanism to support
-    * other types.
-    */
-   data_type = *data_typep;
-
-   cl = _SLclass_get_class ((unsigned char) data_type);
-
-   if (cl->cl_fread == NULL)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "fread does not support %s objects",
-		      cl->cl_name);
-	goto the_return;
-     }
-
-   sizeof_type = cl->cl_sizeof_type;
-
-   num_to_read = *num_elemns;
-   nbytes = (unsigned int) num_to_read * sizeof_type;
-
-   s = SLmalloc (nbytes + 1);
-   if (s == NULL)
-     goto the_return;
-
-   ret = cl->cl_fread (data_type, fp, (VOID_STAR)s, num_to_read, &num_read);
-
-   if ((num_read == 0)
-       && (num_read != num_to_read))
-     ret = -1;
-
-   if ((ret == -1) && ferror (fp))
-     _SLerrno_errno = errno;
-
-   if ((ret == 0)
-       && (num_read != num_to_read))
-     {
-	char *new_s;
-
-	nbytes = num_read * sizeof_type;
-	new_s = SLrealloc (s, nbytes + 1);
-	if (new_s == NULL)
-	  ret = -1;
-	else
-	  s = new_s;
-     }
-
-   if (ret == 0)
-     {
-	if (num_read == 1)
-	  {
-	     ret = SLang_assign_to_ref (ref, data_type, (VOID_STAR)s);
-	     SLfree (s);
-	  }
-	else if ((data_type == SLANG_CHAR_TYPE)
-		 || (data_type == SLANG_UCHAR_TYPE))
-	  {
-	     SLang_BString_Type *bs;
-
-	     bs = SLbstring_create_malloced ((unsigned char *)s, num_read, 1);
-	     ret = SLang_assign_to_ref (ref, SLANG_BSTRING_TYPE, (VOID_STAR)&bs);
-	     SLbstring_free (bs);
-	  }
-	else
-	  {
-	     SLang_Array_Type *at;
-	     int inum_read = (int) num_read;
-	     at = SLang_create_array (data_type, 0, (VOID_STAR)s, &inum_read, 1);
-	     ret = SLang_assign_to_ref (ref, SLANG_ARRAY_TYPE, (VOID_STAR)&at);
-	     SLang_free_array (at);
-	  }
-	s = NULL;
-     }
-
-   the_return:
-
-   if (s != NULL)
-     SLfree (s);
-   
-   if (ret == -1)
-     SLang_push_integer (ret);
-   else
-     SLang_push_uinteger (num_read);
-}
-
-/* Usage: n = fwrite (str, fp); */
-static void stdio_fwrite (SL_File_Table_Type *t)
-{
-   FILE *fp;
-   unsigned char *s;
-   unsigned int num_to_write, num_write;
-   int ret;
-   SLang_BString_Type *b;
-   SLang_Array_Type *at;
-   SLang_Class_Type *cl;
-
-   ret = -1;
-   b = NULL;
-   at = NULL;
-
-   switch (SLang_peek_at_stack ())
-     {
-      case SLANG_BSTRING_TYPE:
-      case SLANG_STRING_TYPE:
-	if (-1 == SLang_pop_bstring (&b))
-	  goto the_return;
-
-	if (NULL == (s = SLbstring_get_pointer (b, &num_to_write)))
-	  goto the_return;
-
-	cl = _SLclass_get_class (SLANG_UCHAR_TYPE);
-	break;
-
-      default:
-	if (-1 == SLang_pop_array (&at, 1))
-	  goto the_return;
-
-	cl = at->cl;
-	num_to_write = at->num_elements;
-	s = (unsigned char *) at->data;
-     }
-
-   if (NULL == (fp = check_fp (t, SL_WRITE)))
-     goto the_return;
-
-   if (cl->cl_fwrite == NULL)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "fwrite does not support %s objects", cl->cl_name);
-	goto the_return;
-     }
-
-   ret = cl->cl_fwrite (cl->cl_data_type, fp, s, num_to_write, &num_write);
-
-   if ((ret == -1) && ferror (fp))
-     _SLerrno_errno = errno;
-
-   /* drop */
-   the_return:
-   if (b != NULL)
-     SLbstring_free (b);
-   if (at != NULL)
-     SLang_free_array (at);
-
-   if (ret == -1)
-     SLang_push_integer (ret);
-   else
-     SLang_push_uinteger (num_write);
-}
-
-static int stdio_fseek (SL_File_Table_Type *t, int *ofs, int *whence)
-{
-   FILE *fp;
-
-   if (NULL == (fp = check_fp (t, 0xFFFF)))
-     return -1;
-
-   if (-1  == fseek (fp, (long) *ofs, *whence))
-     {
-	_SLerrno_errno = errno;
-	return -1;
-     }
-
-   return 0;
-}
-
-static int stdio_ftell (SL_File_Table_Type *t)
-{
-   FILE *fp;
-   long ofs;
-
-   if (NULL == (fp = check_fp (t, 0xFFFF)))
-     return -1;
-
-   if (-1L == (ofs = ftell (fp)))
-     {
-	_SLerrno_errno = errno;
-	return -1;
-     }
-
-   return (int) ofs;
-}
-
-static int stdio_feof (SL_File_Table_Type *t)
-{
-   FILE *fp;
-
-   if (NULL == (fp = check_fp (t, 0xFFFF)))
-     return -1;
-
-   return feof (fp);
-}
-
-static int stdio_ferror (SL_File_Table_Type *t)
-{
-   FILE *fp;
-
-   if (NULL == (fp = check_fp (t, 0xFFFF)))
-     return -1;
-
-   return ferror (fp);
-}
-
-static void stdio_clearerr (SL_File_Table_Type *t)
-{
-   FILE *fp;
-
-   if (NULL != (fp = check_fp (t, 0xFFFF)))
-     clearerr (fp);
-}
-
-/* () = fprintf (fp, "FORMAT", arg...); */
-static int stdio_fprintf (void)
-{
-   char *s;
-   FILE *fp;
-   SLang_MMT_Type *mmt;
-   int status;
-
-   if (-1 == _SLstrops_do_sprintf_n (SLang_Num_Function_Args - 2))
-     return -1;
-   
-   if (-1 == SLang_pop_slstring (&s))
-     return -1;
-   
-   if (NULL == (mmt = pop_fp (SL_WRITE, &fp)))
-     {
-	SLang_free_slstring (s);
-	return -1;
-     }
-   
-   if (EOF == fputs(s, fp))
-     status = -1;
-   else
-     status = (int) strlen (s);
-
-   SLang_free_mmt (mmt);
-   SLang_free_slstring (s);
-   return status;
-}
-
-static int stdio_printf (void)
-{
-   char *s;
-   int status;
-
-   if (-1 == _SLstrops_do_sprintf_n (SLang_Num_Function_Args - 1))
-     return -1;
-
-   if (-1 == SLang_pop_slstring (&s))
-     return -1;
-   
-   if (EOF == fputs(s, stdout))
-     status = -1;
-   else
-     status = (int) strlen (s);
-
-   SLang_free_slstring (s);
-   return status;
-}
-
-   
-#define F SLANG_FILE_PTR_TYPE
-#define R SLANG_REF_TYPE
-#define I SLANG_INT_TYPE
-#define V SLANG_VOID_TYPE
-#define S SLANG_STRING_TYPE
-#define B SLANG_BSTRING_TYPE
-#define U SLANG_UINT_TYPE
-#define D SLANG_DATATYPE_TYPE
-static SLang_Intrin_Fun_Type Stdio_Name_Table[] =
-{
-   MAKE_INTRINSIC_0("fgetslines", stdio_fgetslines, V),
-   MAKE_INTRINSIC_SS("fopen", stdio_fopen, V),
-   MAKE_INTRINSIC_1("feof", stdio_feof, I, F),
-   MAKE_INTRINSIC_1("ferror", stdio_ferror, I, F),
-   MAKE_INTRINSIC_1("fclose", stdio_fclose, I, F),
-   MAKE_INTRINSIC_2("fgets", stdio_fgets, I, R, F),
-   MAKE_INTRINSIC_1("fflush", stdio_fflush, I, F),
-   MAKE_INTRINSIC_2("fputs", stdio_fputs, I, S, F),
-   MAKE_INTRINSIC_0("fprintf", stdio_fprintf, I),
-   MAKE_INTRINSIC_0("printf", stdio_printf, I),
-   MAKE_INTRINSIC_3("fseek", stdio_fseek, I, F, I, I),
-   MAKE_INTRINSIC_1("ftell", stdio_ftell, I, F),
-   MAKE_INTRINSIC_1("clearerr", stdio_clearerr, V, F),
-   MAKE_INTRINSIC_4("fread", stdio_fread, V, R, D, U, F),
-   MAKE_INTRINSIC_1("fwrite", stdio_fwrite, V, F),
-#ifdef HAVE_POPEN
-   MAKE_INTRINSIC_SS("popen", stdio_popen, V),
-   MAKE_INTRINSIC_1("pclose", stdio_fclose, I, F),
-#endif
-   SLANG_END_INTRIN_FUN_TABLE
-};
-#undef F
-#undef I
-#undef R
-#undef V
-#undef S
-#undef B
-#undef U
-#undef D
-
-#ifndef SEEK_SET
-# define SEEK_SET 0
-#endif
-#ifndef SEEK_CUR
-# define SEEK_CUR 1
-#endif
-#ifndef SEEK_END
-# define SEEK_END 2
-#endif
-
-static SLang_IConstant_Type Stdio_Consts [] =
-{
-   MAKE_ICONSTANT("SEEK_SET", SEEK_SET),
-   MAKE_ICONSTANT("SEEK_END", SEEK_END),
-   MAKE_ICONSTANT("SEEK_CUR", SEEK_CUR),
-   SLANG_END_ICONST_TABLE
-};
-
-static void destroy_file_type (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   (void) close_file_type ((SL_File_Table_Type *) ptr);
-}
-
-
-struct _SLang_Foreach_Context_Type
-{
-   SLang_MMT_Type *mmt;
-   FILE *fp;
-#define CTX_USE_LINE 1
-#define CTX_USE_CHAR 2
-   unsigned char type;
-};
-
-
-static SLang_Foreach_Context_Type *
-cl_foreach_open (unsigned char type, unsigned int num)
-{
-   SLang_Foreach_Context_Type *c;
-   SLang_MMT_Type *mmt;
-   FILE *fp;
-
-   if (NULL == (mmt = pop_fp (SL_READ, &fp)))
-     return NULL;
-
-   type = CTX_USE_LINE;
-
-   switch (num)
-     {
-	char *s;
-
-      case 0:
-	type = CTX_USE_LINE;
-	break;
-	
-      case 1:
-	if (-1 == SLang_pop_slstring (&s))
-	  {
-	     SLang_free_mmt (mmt);
-	     return NULL;
-	  }
-	if (0 == strcmp (s, "char"))
-	  type = CTX_USE_CHAR;
-	else if (0 == strcmp (s, "line"))
-	  type = CTX_USE_LINE;
-	else
-	  {
-	     SLang_verror (SL_NOT_IMPLEMENTED,
-			   "using '%s' not supported by File_Type",
-			   s);
-	     SLang_free_slstring (s);
-	     SLang_free_mmt (mmt);
-	     return NULL;
-	  }
-	SLang_free_slstring (s);
-	break;
-
-      default:
-	SLdo_pop_n (num);
-	SLang_verror (SL_NOT_IMPLEMENTED, 
-		      "Usage: foreach (File_Type) using ([line|char])");
-	SLang_free_mmt (mmt);
-	return NULL;
-     }
-
-   if (NULL == (c = (SLang_Foreach_Context_Type *) SLmalloc (sizeof (SLang_Foreach_Context_Type))))
-     {
-	SLang_free_mmt (mmt);
-	return NULL;
-     }
-   memset ((char *) c, 0, sizeof (SLang_Foreach_Context_Type));
-
-   c->type = type;
-   c->mmt = mmt;
-   c->fp = fp;
-
-   return c;
-}
-
-static void cl_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   (void) type;
-   if (c == NULL) return;
-   SLang_free_mmt (c->mmt);
-   SLfree ((char *) c);
-}
-
-static int cl_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   int status;
-   int ch;
-   unsigned int len;
-   char *s;
-
-   (void) type;
-
-   if (c == NULL)
-     return -1;
-   
-   switch (c->type)
-     {
-      case CTX_USE_CHAR:
-	if (EOF == (ch = getc (c->fp)))
-	  return 0;
-	if (-1 == SLang_push_uchar ((unsigned char) ch))
-	  return -1;
-	return 1;
-
-      case CTX_USE_LINE:
-	status = read_one_line (c->fp, &s, &len);
-	if (status <= 0)
-	  return status;
-	if (0 == _SLang_push_slstring (s))
-	  return 1;
-	return -1;
-     }
-   
-   return -1;
-}
-
-static int Stdio_Initialized;
-static SLang_MMT_Type *Stdio_Mmts[3];
-
-int SLang_init_stdio (void)
-{
-   unsigned int i;
-   SL_File_Table_Type *s;
-   SLang_Class_Type *cl;
-   char *names[3];
-
-   if (Stdio_Initialized)
-     return 0;
-
-   SL_File_Table = (SL_File_Table_Type *)SLcalloc(sizeof (SL_File_Table_Type), SL_MAX_FILES);
-   if (SL_File_Table == NULL)
-     return -1;
-
-   if (NULL == (cl = SLclass_allocate_class ("File_Type")))
-     return -1;
-   cl->cl_destroy = destroy_file_type;
-   cl->cl_foreach_open = cl_foreach_open;
-   cl->cl_foreach_close = cl_foreach_close;
-   cl->cl_foreach = cl_foreach;
-
-
-   if (-1 == SLclass_register_class (cl, SLANG_FILE_PTR_TYPE, sizeof (SL_File_Table_Type), SLANG_CLASS_TYPE_MMT))
-     return -1;
-
-   if ((-1 == SLadd_intrin_fun_table(Stdio_Name_Table, "__STDIO__"))
-       || (-1 == SLadd_iconstant_table (Stdio_Consts, NULL))
-       || (-1 == _SLerrno_init ()))
-     return -1;
-
-   names[0] = "stdin";
-   names[1] = "stdout";
-   names[2] = "stderr";
-
-   s = SL_File_Table;
-   s->fp = stdin;  s->flags = SL_READ;
-
-   s++;
-   s->fp = stdout;  s->flags = SL_WRITE;
-
-   s++;
-   s->fp = stderr;  s->flags = SL_WRITE|SL_READ;
-
-   s = SL_File_Table;
-   for (i = 0; i < 3; i++)
-     {
-	if (NULL == (s->file = SLang_create_slstring (names[i])))
-	  return -1;
-
-	if (NULL == (Stdio_Mmts[i] = SLang_create_mmt (SLANG_FILE_PTR_TYPE, (VOID_STAR) s)))
-	  return -1;
-	SLang_inc_mmt (Stdio_Mmts[i]);
-
-	if (-1 == SLadd_intrinsic_variable (s->file, (VOID_STAR)&Stdio_Mmts[i], SLANG_FILE_PTR_TYPE, 1))
-	  return -1;
-	s++;
-     }
-
-   Stdio_Initialized = 1;
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slstring.c b/mdk-stage1/slang/slstring.c
deleted file mode 100644
index 529c41827..000000000
--- a/mdk-stage1/slang/slstring.c
+++ /dev/null
@@ -1,546 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-typedef struct _SLstring_Type
-{
-   struct _SLstring_Type *next;
-   unsigned int ref_count;
-   char bytes [1];
-}
-SLstring_Type;
-
-static SLstring_Type *String_Hash_Table [SLSTRING_HASH_TABLE_SIZE];
-static char Single_Char_Strings [256 * 2];
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-#define MAX_FREE_STORE_LEN 32
-static SLstring_Type *SLS_Free_Store [MAX_FREE_STORE_LEN];
-
-# define NUM_CACHED_STRINGS 601
-typedef struct 
-{
-   unsigned long hash;
-   SLstring_Type *sls;
-   unsigned int len;
-}
-Cached_String_Type;
-static Cached_String_Type Cached_Strings [NUM_CACHED_STRINGS];
-
-#define GET_CACHED_STRING(s) \
-   (Cached_Strings + (unsigned int)(((unsigned long) (s)) % NUM_CACHED_STRINGS))
-
-_INLINE_
-static void cache_string (SLstring_Type *sls, unsigned int len, unsigned long hash)
-{
-   Cached_String_Type *cs;
-   
-   cs = GET_CACHED_STRING(sls->bytes);
-   cs->sls = sls;
-   cs->hash = hash;
-   cs->len = len;
-}
-
-_INLINE_
-static void uncache_string (char *s)
-{
-   Cached_String_Type *cs;
-   
-   cs = GET_CACHED_STRING(s);
-   if ((cs->sls != NULL)
-       && (cs->sls->bytes == s))
-     cs->sls = NULL;
-}
-#endif
-
-
-
-_INLINE_
-unsigned long _SLstring_hash (unsigned char *s, unsigned char *smax)
-{
-   register unsigned long h = 0;
-   register unsigned long sum = 0;
-   unsigned char *smax4;
-
-   smax4 = smax - 4;
-
-   while (s < smax4)
-     {
-	sum += s[0];
-	h = sum + (h << 1);
-	sum += s[1];
-	h = sum + (h << 1);
-	sum += s[2];
-	h = sum + (h << 1);
-	sum += s[3];
-	h = sum + (h << 1);
-	
-	s += 4;
-     }
-
-   while (s < smax)
-     {
-	sum += *s++;
-	h ^= sum + (h << 3);	       /* slightly different */
-     }
-
-   return h;
-}
-
-unsigned long _SLcompute_string_hash (char *s)
-{
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   Cached_String_Type *cs;
-   SLstring_Type *sls;
-
-   cs = GET_CACHED_STRING(s);
-   if (((sls = cs->sls) != NULL)
-       && (sls->bytes == s))
-     return cs->hash;
-#endif
-   return _SLstring_hash ((unsigned char *) s, (unsigned char *) s + strlen (s));
-}
-
-_INLINE_
-/* This routine works with any (long) string */
-static SLstring_Type *find_string (char *s, unsigned int len, unsigned long hash)
-{
-   SLstring_Type *sls;
-   char ch;
-
-   sls = String_Hash_Table [(unsigned int)(hash % SLSTRING_HASH_TABLE_SIZE)];
-
-   if (sls == NULL)
-     return NULL;
-
-   ch = s[0];
-   do
-     {
-	char *bytes = sls->bytes;
-
-	/* Note that we need to actually make sure that bytes[len] == 0. 
-	 * In this case, it is not enough to just compare pointers.  In fact,
-	 * this is called from create_nstring, etc...  It is unlikely that the
-	 * pointer is a slstring
-	 */
-	if ((/* (s == bytes) || */ ((ch == bytes[0])
-		 && (0 == strncmp (s, bytes, len))))
-	    && (bytes [len] == 0))
-	  break;
-
-	sls = sls->next;
-     }
-   while (sls != NULL);
-
-   return sls;
-}
-
-_INLINE_
-static SLstring_Type *find_slstring (char *s, unsigned long hash)
-{
-   SLstring_Type *sls;
-
-   sls = String_Hash_Table [(unsigned int)(hash % SLSTRING_HASH_TABLE_SIZE)];
-   while (sls != NULL)
-     {
-	if (s == sls->bytes)
-	  return sls;
-
-	sls = sls->next;
-     }
-   return sls;
-}
-
-_INLINE_
-static SLstring_Type *allocate_sls (unsigned int len)
-{
-   SLstring_Type *sls;
-   
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if ((len < MAX_FREE_STORE_LEN)
-       && (NULL != (sls = SLS_Free_Store [len])))
-     {
-	SLS_Free_Store[len] = NULL;
-	return sls;
-     }
-#endif
-   /* FIXME: use structure padding */
-   return (SLstring_Type *) SLmalloc (len + sizeof (SLstring_Type));
-}
-
-_INLINE_
-static void free_sls (SLstring_Type *sls, unsigned int len)
-{
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if ((len < MAX_FREE_STORE_LEN)
-       && (SLS_Free_Store[len] == NULL))
-     {
-	SLS_Free_Store [len] = sls;
-	return;
-     }
-#else
-   (void) len;
-#endif
-   SLfree ((char *)sls);
-}
-
-_INLINE_
-static char *create_long_string (char *s, unsigned int len, unsigned long hash)
-{
-   SLstring_Type *sls;
-
-   sls = find_string (s, len, hash);
-
-   if (sls != NULL)
-     {
-	sls->ref_count++;
-	s = sls->bytes;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	cache_string (sls, len, hash); 
-#endif
-	return s;
-     }
-
-   sls = allocate_sls (len);
-   if (sls == NULL)
-     return NULL;
-
-   strncpy (sls->bytes, s, len);
-   sls->bytes[len] = 0;
-   sls->ref_count = 1;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   cache_string (sls, len, hash);
-#endif
-
-   hash = hash % SLSTRING_HASH_TABLE_SIZE;
-   sls->next = String_Hash_Table [(unsigned int)hash];
-   String_Hash_Table [(unsigned int)hash] = sls;
-
-   return sls->bytes;
-}
-
-_INLINE_
-static char *create_short_string (char *s, unsigned int len)
-{
-   char ch;
-
-   /* Note: if len is 0, then it does not matter what *s is.  This is
-    * important for SLang_create_nslstring.
-    */
-   if (len) ch = *s; else ch = 0;
-
-   len = 2 * (unsigned int) ((unsigned char) ch);
-   Single_Char_Strings [len] = ch;
-   Single_Char_Strings [len + 1] = 0;
-   return Single_Char_Strings + len;
-}
-
-/* s cannot be NULL */
-_INLINE_
-static char *create_nstring (char *s, unsigned int len, unsigned long *hash_ptr)
-{
-   unsigned long hash;
-
-   if (len < 2)
-     return create_short_string (s, len);
-
-   hash = _SLstring_hash ((unsigned char *) s, (unsigned char *) (s + len));
-   *hash_ptr = hash;
-
-   return create_long_string (s, len, hash);
-}
-
-char *SLang_create_nslstring (char *s, unsigned int len)
-{
-   unsigned long hash;
-   return create_nstring (s, len, &hash);
-}
-
-char *_SLstring_make_hashed_string (char *s, unsigned int len, unsigned long *hashptr)
-{
-   unsigned long hash;
-
-   if (s == NULL) return NULL;
-
-   hash = _SLstring_hash ((unsigned char *) s, (unsigned char *) s + len);
-   *hashptr = hash;
-
-   if (len < 2)
-     return create_short_string (s, len);
-
-   return create_long_string (s, len, hash);
-}
-
-char *_SLstring_dup_hashed_string (char *s, unsigned long hash)
-{
-   unsigned int len;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   Cached_String_Type *cs;
-   SLstring_Type *sls;
-   
-   if (s == NULL) return NULL;
-   if (s[0] == 0)
-     return create_short_string (s, 0);
-   if (s[1] == 0)
-     return create_short_string (s, 1);
-     
-   cs = GET_CACHED_STRING(s);
-   if (((sls = cs->sls) != NULL)
-       && (sls->bytes == s))
-     {
-	sls->ref_count += 1;
-	return s;
-     }
-#else
-   if (s == NULL) return NULL;
-#endif
-
-   len = strlen (s);
-#if !_SLANG_OPTIMIZE_FOR_SPEED
-   if (len < 2) return create_short_string (s, len);
-#endif
-
-   return create_long_string (s, len, hash);
-}
-
-char *_SLstring_dup_slstring (char *s)
-{
-   SLstring_Type *sls;
-   unsigned int len;
-   unsigned long hash;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   Cached_String_Type *cs;
-   
-   cs = GET_CACHED_STRING(s);
-   if (((sls = cs->sls) != NULL)
-       && (sls->bytes == s))
-     {
-	sls->ref_count += 1;
-	return s;
-     }
-#endif
-   
-   if ((s == NULL) || ((len = strlen (s)) < 2))
-     return s;
-
-   hash = _SLstring_hash ((unsigned char *)s, (unsigned char *)(s + len));
-
-   sls = find_slstring (s, hash);
-   if (sls == NULL)
-     {
-	SLang_Error = SL_INTERNAL_ERROR;
-	return NULL;
-     }
-   
-   sls->ref_count++;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   cache_string (sls, len, hash);
-#endif
-   return s;
-}
-
-static void free_sls_string (SLstring_Type *sls, char *s, unsigned int len, 
-			     unsigned long hash)
-{
-   SLstring_Type *sls1, *prev;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   uncache_string (s);
-#endif
-
-   hash = hash % SLSTRING_HASH_TABLE_SIZE;
-
-   sls1 = String_Hash_Table [(unsigned int) hash];
-
-   prev = NULL;
-
-   /* This should not fail. */
-   while (sls1 != sls)
-     {
-	prev = sls1;
-	sls1 = sls1->next;
-     }
-
-   if (prev != NULL)
-     prev->next = sls->next;
-   else
-     String_Hash_Table [(unsigned int) hash] = sls->next;
-
-   free_sls (sls, len);
-}
-
-_INLINE_
-static void free_long_string (char *s, unsigned int len, unsigned long hash)
-{
-   SLstring_Type *sls;
-
-   if (NULL == (sls = find_slstring (s, hash)))
-     {
-	SLang_doerror ("Application internal error: invalid attempt to free string");
-	return;
-     }
-
-   sls->ref_count--;
-   if (sls->ref_count != 0)
-     {
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	/* cache_string (sls, len, hash); */
-#endif
-	return;
-     }
-   
-
-   free_sls_string (sls, s, len, hash);
-}
-
-/* This routine may be passed NULL-- it is not an error. */
-void SLang_free_slstring (char *s)
-{
-   unsigned long hash;
-   unsigned int len;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   Cached_String_Type *cs;
-   SLstring_Type *sls;
-
-   cs = GET_CACHED_STRING(s);
-   if (((sls = cs->sls) != NULL)
-       && (sls->bytes == s))
-     {
-	if (sls->ref_count <= 1)
-	  free_sls_string (sls, s, cs->len, cs->hash);
-	else
-	  sls->ref_count -= 1;
-	return;
-     }
-#endif
-
-   if (s == NULL) return;
-
-   if ((len = strlen (s)) < 2)
-     return;
-
-   hash = _SLstring_hash ((unsigned char *)s, (unsigned char *) s + len);
-   free_long_string (s, len, hash);
-}
-
-char *SLang_create_slstring (char *s)
-{
-   unsigned long hash;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   Cached_String_Type *cs;
-   SLstring_Type *sls;
-
-   cs = GET_CACHED_STRING(s);
-   if (((sls = cs->sls) != NULL)
-       && (sls->bytes == s))
-     {
-	sls->ref_count += 1;
-	return s;
-     }
-#endif
-
-   if (s == NULL) return NULL;
-   return create_nstring (s, strlen (s), &hash);
-}
-
-void _SLfree_hashed_string (char *s, unsigned int len, unsigned long hash)
-{
-   if ((s == NULL) || (len < 2)) return;
-   free_long_string (s, len, hash);
-}
-
-
-char *_SLallocate_slstring (unsigned int len)
-{
-   SLstring_Type *sls = allocate_sls (len);
-   if (sls == NULL)
-     return NULL;
-
-   return sls->bytes;
-}
-
-void _SLunallocate_slstring (char *s, unsigned int len)
-{
-   SLstring_Type *sls;
-   
-   if (s == NULL)
-     return;
-   
-   sls = (SLstring_Type *) (s - offsetof(SLstring_Type,bytes[0]));
-   free_sls (sls, len);
-}
-
-char *_SLcreate_via_alloced_slstring (char *s, unsigned int len)
-{   
-   unsigned long hash;
-   SLstring_Type *sls;
-
-   if (s == NULL)
-     return NULL;
-   
-   if (len < 2)
-     {
-	char *s1 = create_short_string (s, len);
-	_SLunallocate_slstring (s, len);
-	return s1;
-     }
-
-   /* s is not going to be in the cache because when it was malloced, its
-    * value was unknown.  This simplifies the coding.
-    */
-   hash = _SLstring_hash ((unsigned char *)s, (unsigned char *)s + len);
-   sls = find_string (s, len, hash);
-   if (sls != NULL)
-     {
-	sls->ref_count++;
-	_SLunallocate_slstring (s, len);
-	s = sls->bytes;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	cache_string (sls, len, hash); 
-#endif
-	return s;
-     }
-	
-   sls = (SLstring_Type *) (s - offsetof(SLstring_Type,bytes[0]));
-   sls->ref_count = 1;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   cache_string (sls, len, hash);
-#endif
-
-   hash = hash % SLSTRING_HASH_TABLE_SIZE;
-   sls->next = String_Hash_Table [(unsigned int)hash];
-   String_Hash_Table [(unsigned int)hash] = sls;
-
-   return s;
-}
-
-/* Note, a and b may be ordinary strings.  The result is an slstring */
-char *SLang_concat_slstrings (char *a, char *b)
-{
-   unsigned int lena, len;
-   char *c;
-
-   lena = strlen (a);
-   len = lena + strlen (b);
-
-   c = _SLallocate_slstring (len);
-   if (c == NULL)
-     return NULL;
-
-   strcpy (c, a);
-   strcpy (c + lena, b);
-
-   return _SLcreate_via_alloced_slstring (c, len);
-}
-
diff --git a/mdk-stage1/slang/slstrops.c b/mdk-stage1/slang/slstrops.c
deleted file mode 100644
index a57ef6389..000000000
--- a/mdk-stage1/slang/slstrops.c
+++ /dev/null
@@ -1,1686 +0,0 @@
-/* -*- mode: C; mode: fold; -*- */
-/* string manipulation functions for S-Lang. */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-/*{{{ Include Files */
-
-#include <time.h>
-
-#ifndef __QNX__
-# if defined(__GO32__) || defined(__WATCOMC__)
-#  include <dos.h>
-#  include <bios.h>
-# endif
-#endif
-
-#if SLANG_HAS_FLOAT
-#include <math.h>
-#endif
-
-#include <string.h>
-#include <stdarg.h>
-#include <ctype.h>
-
-#ifndef isdigit
-# define isdigit(x) (((x) >= '0') && ((x) <= '9'))
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-/*}}}*/
-
-#define USE_ALLOC_STSTRING 1
-
-/*{{{ Utility Functions */
-
-static char Utility_Char_Table [256];
-static unsigned char WhiteSpace_Lut[256];
-
-static void set_utility_char_table (char *pos) /*{{{*/
-{
-   register char *t = Utility_Char_Table, *tmax;
-   register unsigned char ch;
-
-   tmax = t + 256;
-   while (t < tmax) *t++ = 0;
-
-   t = Utility_Char_Table;
-   while ((ch = (unsigned char) *pos++) != 0) t[ch] = 1;
-}
-
-/*}}}*/
-
-_INLINE_
-static unsigned char *make_whitespace_lut (void)
-{
-   if (WhiteSpace_Lut[' '] != 1)
-     {
-	WhiteSpace_Lut[' '] = WhiteSpace_Lut['\r'] 
-	  = WhiteSpace_Lut ['\n'] = WhiteSpace_Lut['\t']
-	  = WhiteSpace_Lut ['\f'] = 1;
-     }
-   return WhiteSpace_Lut;
-}
-
-static unsigned char *make_lut (unsigned char *s, unsigned char *lut)
-{
-   int reverse = 0;
-   
-   if (*s == '^')
-     {
-	reverse = 1;
-	s++;
-     }
-   SLmake_lut (lut, s, reverse);
-   return lut;
-}
-
-static unsigned int do_trim (char **beg, int do_beg, 
-			     char **end, int do_end, 
-			     char *white) /*{{{*/
-{
-   unsigned int len;
-   char *a, *b;
-
-   set_utility_char_table (white);
-
-   a = *beg;
-   len = strlen (a);
-   b = a + len;
-
-   if (do_beg)
-     while (Utility_Char_Table[(unsigned char) *a]) a++;
-
-   if (do_end)
-     {
-	b--;
-	while ((b >= a) && (Utility_Char_Table[(unsigned char) *b])) b--;
-	b++;
-     }
-
-   len = (unsigned int) (b - a);
-   *beg = a;
-   *end = b;
-   return len;
-}
-
-/*}}}*/
-
-/*}}}*/
-
-static int pop_3_strings (char **a, char **b, char **c)
-{
-   *a = *b = *c = NULL;
-   if (-1 == SLpop_string (c))
-     return -1;
-   
-   if (-1 == SLpop_string (b))
-     {
-	SLfree (*c);
-	*c = NULL;
-	return -1;
-     }
-
-   if (-1 == SLpop_string (a))
-     {
-	SLfree (*b);
-	SLfree (*c);
-	*b = *c = NULL;
-	return -1;
-     }
-   
-   return 0;
-}
-
-static void free_3_strings (char *a, char *b, char *c)
-{
-   SLfree (a);
-   SLfree (b);
-   SLfree (c);
-}
-
-static void strcat_cmd (void) /*{{{*/
-{
-   char *c, *c1;
-   int nargs;
-   int i;
-   char **ptrs;
-   unsigned int len;
-#if !USE_ALLOC_STSTRING
-   char buf[256];
-#endif
-   nargs = SLang_Num_Function_Args;
-   if (nargs <= 0) nargs = 2;
-
-   if (NULL == (ptrs = (char **)SLmalloc (nargs * sizeof (char *))))
-     return;
-
-   memset ((char *) ptrs, 0, sizeof (char *) * nargs);
-
-   c = NULL;
-   i = nargs;
-   len = 0;
-   while (i != 0)
-     {
-	char *s;
-
-	i--;
-	if (-1 == SLang_pop_slstring (&s))
-	  goto free_and_return;
-	ptrs[i] = s;
-	len += strlen (s);
-     }
-#if USE_ALLOC_STSTRING
-   if (NULL == (c = _SLallocate_slstring (len)))
-     goto free_and_return;
-#else
-   len++;			       /* \0 char */
-   if (len <= sizeof (buf))
-     c = buf;
-   else if (NULL == (c = SLmalloc (len)))
-     goto free_and_return;
-#endif
-
-   c1 = c;
-   for (i = 0; i < nargs; i++)
-     {
-	strcpy (c1, ptrs[i]);
-	c1 += strlen (c1);
-     }
-   
-   free_and_return:
-   for (i = 0; i < nargs; i++)
-     SLang_free_slstring (ptrs[i]);
-   SLfree ((char *) ptrs);
-
-#if USE_ALLOC_STSTRING
-   (void) _SLpush_alloced_slstring (c, len);
-#else
-   if (c != buf)
-     (void) SLang_push_malloced_string (c);   /* NULL ok */
-   else
-     (void) SLang_push_string (c);
-#endif
-}
-
-/*}}}*/
-
-static int _SLang_push_nstring (char *a, unsigned int len)
-{
-   a = SLang_create_nslstring (a, len);
-   if (a == NULL)
-     return -1;
-   
-   return _SLang_push_slstring (a);
-}
-
-
-static void strtrim_cmd_internal (char *str, int do_beg, int do_end)
-{
-   char *beg, *end, *white;
-   int free_str;
-   unsigned int len;
-
-   /* Go through SLpop_string to get a private copy since it will be
-    * modified.
-    */
-   
-   free_str = 0;
-   if (SLang_Num_Function_Args == 2)
-     {
-	white = str;
-	if (-1 == SLang_pop_slstring (&str))
-	  return;
-	free_str = 1;
-     }
-   else white = " \t\f\r\n";
-
-   beg = str;
-   len = do_trim (&beg, do_beg, &end, do_end, white);
-   
-   (void) _SLang_push_nstring (beg, len);
-   if (free_str)
-     SLang_free_slstring (str);
-}
-
-   
-static void strtrim_cmd (char *str)
-{
-   strtrim_cmd_internal (str, 1, 1);
-}
-
-static void strtrim_beg_cmd (char *str)
-{
-   strtrim_cmd_internal (str, 1, 0);
-}
-
-static void strtrim_end_cmd (char *str)
-{
-   strtrim_cmd_internal (str, 0, 1);
-}
-
-
-static void strcompress_cmd (void) /*{{{*/
-{
-   char *str, *white, *c;
-   unsigned char *s, *beg, *end;
-   unsigned int len;
-   char pref_char;
-
-   if (SLpop_string (&white)) return;
-   if (SLpop_string (&str))
-     {
-	SLfree (white);
-	return;
-     }
-
-   /* The first character of white is the preferred whitespace character */
-   pref_char = *white;
-
-   beg = (unsigned char *) str;
-   (void) do_trim ((char **) &beg, 1, (char **) &end, 1, white);
-   SLfree (white);
-
-   /* Determine the effective length */
-   len = 0;
-   s = (unsigned char *) beg;
-   while (s < end)
-     {
-	len++;
-	if (Utility_Char_Table[*s++])
-	  {
-	     while ((s < end) && Utility_Char_Table[*s]) s++;
-	  }
-     }
-
-#if USE_ALLOC_STSTRING
-   c = _SLallocate_slstring (len);
-#else
-   c = SLmalloc (len + 1);
-#endif
-   if (c == NULL)
-     {
-	SLfree (str);
-	return;
-     }
-   
-   s = (unsigned char *) c;
-
-   while (beg < end)
-     {
-	unsigned char ch = *beg++;
-	
-	if (0 == Utility_Char_Table[ch])
-	  {
-	     *s++ = ch;
-	     continue;
-	  }
-	
-	*s++ = (unsigned char) pref_char;
-	
-	while ((beg < end) && Utility_Char_Table[*beg]) 
-	  beg++;
-     }
-
-   *s = 0;
-   
-#if USE_ALLOC_STSTRING
-   (void) _SLpush_alloced_slstring (c, len);
-#else
-   SLang_push_malloced_string(c);
-#endif
-
-   SLfree(str);
-}
-
-/*}}}*/
-
-static int str_replace_cmd_1 (char *orig, char *match, char *rep, unsigned int max_num_replaces,
-			      char **new_strp) /*{{{*/
-{
-   char *s, *t, *new_str;
-   unsigned int rep_len, match_len, new_len;
-   unsigned int num_replaces;
-
-   *new_strp = NULL;
-
-   match_len = strlen (match);
-
-   if (match_len == 0)
-     return 0;
-
-   num_replaces = 0;
-   s = orig;
-   while (num_replaces < max_num_replaces)
-     {
-	s = strstr (s, match);
-	if (s == NULL)
-	  break;
-	s += match_len;
-	num_replaces++;
-     }
-
-   if (num_replaces == 0)
-     return 0;
-
-   max_num_replaces = num_replaces;
-
-   rep_len = strlen (rep);
-
-   new_len = (strlen (orig) - num_replaces * match_len) + num_replaces * rep_len;
-   new_str = SLmalloc (new_len + 1);
-   if (new_str == NULL)
-     return -1;
-   
-   s = orig;
-   t = new_str;
-   
-   for (num_replaces = 0; num_replaces < max_num_replaces; num_replaces++)
-     {
-	char *next_s;
-	unsigned int len;
-
-	next_s = strstr (s, match);    /* cannot be NULL */
-	len = (unsigned int) (next_s - s);
-	strncpy (t, s, len);
-	t += len;
-	strcpy (t, rep);
-	t += rep_len;
-	
-	s = next_s + match_len;
-     }
-   strcpy (t, s);
-   *new_strp = new_str;
-
-   return (int) num_replaces;
-}
-
-/*}}}*/
-
-static void reverse_string (char *a)
-{
-   char *b;
-   
-   b = a + strlen (a);
-   while (b > a)
-     {
-	char ch;
-
-	b--;
-	ch = *a;
-	*a++ = *b;
-	*b = ch;
-     }
-}
-
-static int strreplace_cmd (int *np)
-{   
-   char *orig, *match, *rep;
-   char *new_str;
-   int max_num_replaces;
-   int ret;
-
-   max_num_replaces = *np;
-
-   if (-1 == pop_3_strings (&orig, &match, &rep))
-     return -1;
-
-   if (max_num_replaces < 0)
-     {
-	reverse_string (orig);
-	reverse_string (match);
-	reverse_string (rep);
-	ret = str_replace_cmd_1 (orig, match, rep, -max_num_replaces, &new_str);
-	if (ret > 0) reverse_string (new_str);
-	else if (ret == 0)
-	  reverse_string (orig);
-     }
-   else ret = str_replace_cmd_1 (orig, match, rep, max_num_replaces, &new_str);
-   
-   if (ret == 0)
-     {
-	if (-1 == SLang_push_malloced_string (orig))
-	  ret = -1;
-	orig = NULL;
-     }
-   else if (ret > 0)
-     {
-	if (-1 == SLang_push_malloced_string (new_str))
-	  ret = -1;
-     }
-
-   free_3_strings (orig, match, rep);
-   return ret;
-}
-
-static int str_replace_cmd (char *orig, char *match, char *rep)
-{
-   char *s;
-   int ret;
-
-   ret = str_replace_cmd_1 (orig, match, rep, 1, &s);
-   if (ret == 1)
-     (void) SLang_push_malloced_string (s);
-   return ret;
-}
-
-	
-     
-static void strtok_cmd (char *str)
-{
-   _SLString_List_Type sl;
-   unsigned char white_buf[256];
-   char *s;
-   unsigned char *white;
-   
-   if (SLang_Num_Function_Args == 1)
-     white = make_whitespace_lut ();
-   else
-     {
-	white = white_buf;
-	make_lut ((unsigned char *)str, white);
-	if (-1 == SLang_pop_slstring (&str))
-	  return;
-     }
-
-   if (-1 == _SLstring_list_init (&sl, 256, 1024))
-     goto the_return;
-
-   s = str;
-   while (*s != 0)
-     {
-	char *s0;
-
-	s0 = s;
-	/* Skip whitespace */
-	while ((*s0 != 0) && (0 != white[(unsigned char)*s0]))
-	  s0++;
-
-	if (*s0 == 0)
-	  break;
-
-	s = s0;
-	while ((*s != 0) && (0 == white[(unsigned char) *s]))
-	  s++;
-
-	/* sl deleted upon failure */
-	if (-1 == _SLstring_list_append (&sl, SLang_create_nslstring (s0, (unsigned int) (s - s0))))
-	  goto the_return;
-     }
-
-   /* Deletes sl */
-   (void) _SLstring_list_push (&sl);
-
-   the_return:
-   if (white == white_buf)
-     SLang_free_slstring (str);
-}
-
-/* This routine returns the string with text removed between single character
-   comment delimiters from the set b and e. */
-
-static void str_uncomment_string_cmd (char *str, char *b, char *e) /*{{{*/
-{
-   unsigned char chb, che;
-   unsigned char *s, *cbeg, *mark;
-
-   if (strlen(b) != strlen(e))
-     {
-	SLang_doerror ("Comment delimiter length mismatch.");
-	return;
-     }
-
-   set_utility_char_table (b);
-
-   if (NULL == (str = (char *) SLmake_string(str))) return;
-
-   s = (unsigned char *) str;
-
-   while ((chb = *s++) != 0)
-     {
-	if (Utility_Char_Table [chb] == 0) continue;
-
-	mark = s - 1;
-
-	cbeg = (unsigned char *) b;
-	while (*cbeg != chb) cbeg++;
-
-	che = (unsigned char) *(e + (int) (cbeg - (unsigned char *) b));
-
-	while (((chb = *s++) != 0) && (chb != che));
-
-	if (chb == 0)
-	  {
-	     /* end of string and end not found.  Just truncate it a return; */
-	     *mark = 0;
-	     break;
-	  }
-
-	strcpy ((char *) mark, (char *)s);
-	s = mark;
-     }
-   SLang_push_malloced_string (str);
-}
-
-/*}}}*/
-
-static void str_quote_string_cmd (char *str, char *quotes, int *slash_ptr) /*{{{*/
-{
-   char *q;
-   int slash;
-   unsigned int len;
-   register char *t, *s, *q1;
-   register unsigned char ch;
-
-   slash = *slash_ptr;
-
-   if ((slash > 255) || (slash < 0))
-     {
-	SLang_Error = SL_INVALID_PARM;
-	return;
-     }
-
-   /* setup the utility table to have 1s at quote char postitions. */
-   set_utility_char_table (quotes);
-
-   t = Utility_Char_Table;
-   t[(unsigned int) slash] = 1;
-
-   /* calculate length */
-   s = str;
-   len = 0;
-   while ((ch = (unsigned char) *s++) != 0) if (t[ch]) len++;
-   len += (unsigned int) (s - str);
-
-   if (NULL != (q = SLmalloc(len)))
-     {
-	s = str; q1 = q;
-	while ((ch = (unsigned char) *s++) != 0)
-	  {
-	     if (t[ch]) *q1++ = slash;
-	     *q1++ = (char) ch;
-	  }
-	*q1 = 0;
-	SLang_push_malloced_string(q);
-     }
-}
-
-/*}}}*/
-
-/* returns the position of substrin in a string or null */
-static int issubstr_cmd (char *a, char *b) /*{{{*/
-{
-   char *c;
-
-   if (NULL == (c = (char *) strstr(a, b)))
-     return 0;
-
-   return 1 + (int) (c - a);
-}
-
-/*}}}*/
-
-/* returns to stack string at pos n to n + m of a */
-static void substr_cmd (char *a, int *n_ptr, int *m_ptr) /*{{{*/
-{
-   int n, m;
-   int lena;
-
-   n = *n_ptr;
-   m = *m_ptr;
-
-   lena = strlen (a);
-   if (n > lena) n = lena + 1;
-   if (n < 1)
-     {
-	SLang_Error = SL_INVALID_PARM;
-	return;
-     }
-
-   n--;
-   if (m < 0) m = lena;
-   if (n + m > lena) m = lena - n;
-   
-   (void) _SLang_push_nstring (a + n, (unsigned int) m);
-}
-
-/*}}}*/
-
-/* substitute char m at positin string n in string*/
-static void strsub_cmd (int *nptr, int *mptr) /*{{{*/
-{
-   char *a;
-   int n, m;
-   unsigned int lena;
-
-   if (-1 == SLpop_string (&a))
-     return;
-
-   n = *nptr;
-   m = *mptr;
-
-   lena = strlen (a);
-
-   if ((n <= 0) || (lena < (unsigned int) n))
-     {
-	SLang_Error = SL_INVALID_PARM;
-	SLfree(a);
-	return;
-     }
-
-   a[n - 1] = (char) m;
-
-   SLang_push_malloced_string (a);
-}
-
-/*}}}*/
-
-static void strup_cmd(void) /*{{{*/
-{
-   unsigned char c, *a;
-   char *str;
-
-   if (SLpop_string (&str))
-     return;
-
-   a = (unsigned char *) str;
-   while ((c = *a) != 0)
-     {
-	/* if ((*a >= 'a') && (*a <= 'z')) *a -= 32; */
-	*a = UPPER_CASE(c);
-	a++;
-     }
-
-   SLang_push_malloced_string (str);
-}
-
-/*}}}*/
-
-static int isdigit_cmd (char *what) /*{{{*/
-{
-   return isdigit((unsigned char)*what);
-}
-
-/*}}}*/
-static int toupper_cmd (int *ch) /*{{{*/
-{
-   return UPPER_CASE(*ch);
-}
-
-/*}}}*/
-
-static int tolower_cmd (int *ch) /*{{{*/
-{
-   return LOWER_CASE(*ch);
-}
-
-/*}}}*/
-
-static void strlow_cmd (void) /*{{{*/
-{
-   unsigned char c, *a;
-   char *str;
-
-   if (SLpop_string(&str)) return;
-   a = (unsigned char *) str;
-   while ((c = *a) != 0)
-     {
-	/* if ((*a >= 'a') && (*a <= 'z')) *a -= 32; */
-	*a = LOWER_CASE(c);
-	a++;
-     }
-
-   SLang_push_malloced_string ((char *) str);
-}
-
-/*}}}*/
-
-static SLang_Array_Type *do_strchop (char *str, int delim, int quote)
-{
-   int count;
-   char *s0, *elm;
-   register char *s1;
-   register unsigned char ch;
-   int quoted;
-   SLang_Array_Type *at;
-   char **data;
-
-   if ((quote < 0) || (quote > 255)
-       || (delim <= 0) || (delim > 255))
-     {
-	SLang_Error = SL_INVALID_PARM;
-	return NULL;
-     }
-
-   s1 = s0 = str;
-
-   quoted = 0;
-   count = 1;			       /* at least 1 */
-   while (1)
-     {
-	ch = (unsigned char) *s1++;
-	if ((ch == quote) && quote)
-	  {
-	     if (*s1 == 0)
-	       break;
-
-	     s1++;
-	     continue;
-	  }
-
-	if (ch == delim)
-	  {
-	     count++;
-	     continue;
-	  }
-
-	if (ch == 0)
-	  break;
-     }
-
-   if (NULL == (at = SLang_create_array (SLANG_STRING_TYPE, 0, NULL, &count, 1)))
-     return NULL;
-
-   data = (char **)at->data;
-
-   count = 0;
-   s1 = s0;
-
-   while (1)
-     {
-	ch = (unsigned char) *s1;
-
-	if ((ch == quote) && quote)
-	  {
-	     s1++;
-	     if (*s1 != 0) s1++;
-	     quoted = 1;
-	     continue;
-	  }
-
-	if ((ch == delim) || (ch == 0))
-	  {
-	     if (quoted == 0)
-	       elm = SLang_create_nslstring (s0, (unsigned int) (s1 - s0));
-	     else
-	       {
-		  register char ch1, *p, *p1;
-		  char *tmp;
-
-		  tmp = SLmake_nstring (s0, (unsigned int)(s1 - s0));
-		  if (tmp == NULL)
-		    break;
-
-		  /* Now unquote it */
-		  p = p1 = tmp;
-		  do
-		    {
-		       ch1 = *p1++;
-		       if (ch1 == '\\') ch1 = *p1++;
-		       *p++ = ch1;
-		    }
-		  while (ch1 != 0);
-		  quoted = 0;
-
-		  elm = SLang_create_slstring (tmp);
-		  SLfree (tmp);
-	       }
-
-	     if (elm == NULL)
-	       break;
-
-	     data[count] = elm;
-	     count++;
-
-	     if (ch == 0)
-	       return at;
-
-	     s1++;		       /* skip past delim */
-	     s0 = s1;		       /* and reset */
-	  }
-	else s1++;
-     }
-
-   SLang_free_array (at);
-   return NULL;
-}
-
-static void strchop_cmd (char *str, int *q, int *d)
-{
-   (void) SLang_push_array (do_strchop (str, *q, *d), 1);
-}
-
-static void strchopr_cmd (char *str, int *q, int *d)
-{
-   SLang_Array_Type *at;
-
-   if (NULL != (at = do_strchop (str, *q, *d)))
-     {
-	char **d0, **d1;
-
-	d0 = (char **) at->data;
-	d1 = d0 + (at->num_elements - 1);
-
-	while (d0 < d1)
-	  {
-	     char *tmp;
-
-	     tmp = *d0;
-	     *d0 = *d1;
-	     *d1 = tmp;
-	     d0++;
-	     d1--;
-	  }
-     }
-   SLang_push_array (at, 1);
-}
-
-static int strcmp_cmd (char *a, char *b) /*{{{*/
-{
-   return strcmp(a, b);
-}
-
-/*}}}*/
-
-static int strncmp_cmd (char *a, char *b, int *n) /*{{{*/
-{
-   return strncmp(a, b, (unsigned int) *n);
-}
-
-/*}}}*/
-
-static int strlen_cmd (char *s) /*{{{*/
-{
-   return (int) strlen (s);
-}
-/*}}}*/
-
-static void extract_element_cmd (char *list, int *nth_ptr, int *delim_ptr)
-{
-   char buf[1024], *b;
-
-   b = buf;
-   if (-1 == SLextract_list_element (list, *nth_ptr, *delim_ptr, buf, sizeof(buf)))
-     b = NULL;
-
-   SLang_push_string (b);
-}
-
-/* sprintf functionality for S-Lang */
-
-static char *SLdo_sprintf (char *fmt) /*{{{*/
-{
-   register char *p = fmt, ch;
-   char *out = NULL, *outp = NULL;
-   char dfmt[1024];	       /* used to hold part of format */
-   char *f;
-   VOID_STAR varp;
-   int want_width, width, precis, use_varp, int_var;
-   long long_var;
-   unsigned int len = 0, malloc_len = 0, dlen;
-   int do_free, guess_size;
-#if SLANG_HAS_FLOAT
-   int tmp1, tmp2, use_double;
-   double x;
-#endif
-   int use_long = 0;
-
-   while (1)
-     {
-	while ((ch = *p) != 0)
-	  {
-	     if (ch == '%')
-	       break;
-	     p++;
-	  }
-
-	/* p points at '%' or 0 */
-
-	dlen = (unsigned int) (p - fmt);
-
-	if (len + dlen >= malloc_len)
-	  {
-	     malloc_len = len + dlen;
-	     if (out == NULL) outp = SLmalloc(malloc_len + 1);
-	     else outp = SLrealloc(out, malloc_len + 1);
-	     if (NULL == outp)
-	       return out;
-	     out = outp;
-	     outp = out + len;
-	  }
-
-	strncpy(outp, fmt, dlen);
-	len += dlen;
-	outp = out + len;
-	*outp = 0;
-	if (ch == 0) break;
-
-	/* bump it beyond '%' */
-	++p;
-	fmt = p;
-
-	f = dfmt;
-	*f++ = ch;
-	/* handle flag char */
-	ch = *p++;
-
-	/* Make sure cases such as "% #g" can be handled. */
-	if ((ch == '-') || (ch == '+') || (ch == ' ') || (ch == '#'))
-	  {
-	     *f++ = ch;
-	     ch = *p++;
-	     if ((ch == '-') || (ch == '+') || (ch == ' ') || (ch == '#'))
-	       {
-		  *f++ = ch;
-		  ch = *p++;
-	       }
-	  }
-
-
-	/* width */
-	/* I have got to parse it myself so that I can see how big it needs
-	 * to be.
-	 */
-	want_width = width = 0;
-	if (ch == '*')
-	  {
-	     if (SLang_pop_integer(&width)) return (out);
-	     want_width = 1;
-	     ch = *p++;
-	  }
-	else
-	  {
-	     if (ch == '0')
-	       {
-		  *f++ = '0';
-		  ch = *p++;
-	       }
-
-	     while ((ch <= '9') && (ch >= '0'))
-	       {
-		  width = width * 10 + (ch - '0');
-		  ch = *p++;
-		  want_width = 1;
-	       }
-	  }
-
-	if (want_width)
-	  {
-	     sprintf(f, "%d", width);
-	     f += strlen (f);
-	  }
-	precis = 0;
-	/* precision -- also indicates max number of chars from string */
-	if (ch == '.')
-	  {
-	     *f++ = ch;
-	     ch = *p++;
-	     want_width = 0;
-	     if (ch == '*')
-	       {
-		  if (SLang_pop_integer(&precis)) return (out);
-		  ch = *p++;
-		  want_width = 1;
-	       }
-	     else while ((ch <= '9') && (ch >= '0'))
-	       {
-		  precis = precis * 10 + (ch - '0');
-		  ch = *p++;
-		  want_width = 1;
-	       }
-	     if (want_width)
-	       {
-		  sprintf(f, "%d", precis);
-		  f += strlen (f);
-	       }
-	     else precis = 0;
-	  }
-
-	long_var = 0;
-	int_var = 0;
-	varp = NULL;
-	guess_size = 32;
-#if SLANG_HAS_FLOAT
-	use_double = 0;
-#endif
-	use_long = 0;
-	use_varp = 0;
-	do_free = 0;
-
-	if (ch == 'l')
-	  {
-	     use_long = 1;
-	     ch = *p++;
-	  }
-	else if (ch == 'h') ch = *p++; /* not supported */
-
-	/* Now the actual format specifier */
-	switch (ch)
-	  {
-	   case 'S':
-	     _SLstring_intrinsic ();
-	     ch = 's';
-	     /* drop */
-	   case 's':
-	     if (SLang_pop_slstring((char **) &varp)) return (out);
-	     do_free = 1;
-	     guess_size = strlen((char *) varp);
-	     use_varp = 1;
-	     break;
-
-	   case '%':
-	     guess_size = 1;
-	     do_free = 0;
-	     use_varp = 1;
-	     varp = (VOID_STAR) "%";
-	     break;
-
-	   case 'c': guess_size = 1;
-	     use_long = 0;
-	     /* drop */
-	   case 'd':
-	   case 'i':
-	   case 'o':
-	   case 'u':
-	   case 'X':
-	   case 'x':
-	     if (SLang_pop_long (&long_var)) return(out);
-	     if (use_long == 0)
-	       int_var = (int) long_var;
-	     else
-	       *f++ = 'l';
-	     break;
-
-	   case 'f':
-	   case 'e':
-	   case 'g':
-	   case 'E':
-	   case 'G':
-#if SLANG_HAS_FLOAT
-	     if (SLang_pop_double(&x, &tmp1, &tmp2)) return (out);
-	     use_double = 1;
-	     guess_size = 256;
-	     (void) tmp1; (void) tmp2;
-	     use_long = 0;
-	     break;
-#endif
-	   case 'p':
-	     guess_size = 32;
-	     /* Pointer type?? Why?? */
-	     if (-1 == SLdo_pop ())
-	       return out;
-	     varp = (VOID_STAR) _SLStack_Pointer;
-	     use_varp = 1;
-	     use_long = 0;
-	     break;
-
-	   default:
-	     SLang_doerror("Invalid Format.");
-	     return(out);
-	  }
-	*f++ = ch; *f = 0;
-
-	width = width + precis;
-	if (width > guess_size) guess_size = width;
-
-	if (len + guess_size > malloc_len)
-	  {
-	     outp = (char *) SLrealloc(out, len + guess_size + 1);
-	     if (outp == NULL)
-	       {
-		  SLang_Error = SL_MALLOC_ERROR;
-		  return (out);
-	       }
-	     out = outp;
-	     outp = out + len;
-	     malloc_len = len + guess_size;
-	  }
-
-	if (use_varp)
-	  {
-	     sprintf(outp, dfmt, varp);
-	     if (do_free) SLang_free_slstring ((char *)varp);
-	  }
-#if SLANG_HAS_FLOAT
-	else if (use_double) sprintf(outp, dfmt, x);
-#endif
-	else if (use_long) sprintf (outp, dfmt, long_var);
-	else sprintf(outp, dfmt, int_var);
-
-	len += strlen(outp);
-	outp = out + len;
-	fmt = p;
-     }
-
-   if (out != NULL)
-     {
-	outp = SLrealloc (out, (unsigned int) (outp - out) + 1);
-	if (outp != NULL) out = outp;
-     }
-
-   return (out);
-}
-
-/*}}}*/
-
-int _SLstrops_do_sprintf_n (int n) /*{{{*/
-{
-   char *p;
-   char *fmt;
-   SLang_Object_Type *ptr;
-   int ofs;
-
-   if (-1 == (ofs = SLreverse_stack (n + 1)))
-     return -1;
-
-   ptr = _SLRun_Stack + ofs;
-
-   if (SLang_pop_slstring(&fmt))
-     return -1;
-
-   p = SLdo_sprintf (fmt);
-   SLang_free_slstring (fmt);
-
-   while (_SLStack_Pointer > ptr)
-     SLdo_pop ();
-
-   if (SLang_Error)
-     {
-	SLfree (p);
-	return -1;
-     }
-   
-   return SLang_push_malloced_string (p);
-}
-
-/*}}}*/
-
-static void sprintf_n_cmd (int *n)
-{
-   _SLstrops_do_sprintf_n (*n);
-}
-
-static void sprintf_cmd (void)
-{
-   _SLstrops_do_sprintf_n (SLang_Num_Function_Args - 1);    /* do not include format */
-}
-
-/* converts string s to a form that can be used in an eval */
-static void make_printable_string(char *s) /*{{{*/
-{
-   unsigned int len;
-   register char *s1 = s, ch, *ss1;
-   char *ss;
-
-   /* compute length */
-   len = 3;
-   while ((ch = *s1++) != 0)
-     {
-	if ((ch == '\n') || (ch == '\\') || (ch == '"')) len++;
-	len++;
-     }
-
-   if (NULL == (ss = SLmalloc(len)))
-     return;
-
-   s1 = s;
-   ss1 = ss;
-   *ss1++ = '"';
-   while ((ch = *s1++) != 0)
-     {
-	if (ch == '\n')
-	  {
-	     ch = 'n';
-	     *ss1++ = '\\';
-	  }
-	else if ((ch == '\\') || (ch == '"'))
-	  {
-	     *ss1++ = '\\';
-	  }
-	*ss1++ = ch;
-     }
-   *ss1++ = '"';
-   *ss1 = 0;
-   if (-1 == SLang_push_string (ss))
-     SLfree (ss);
-}
-
-/*}}}*/
-
-static int is_list_element_cmd (char *list, char *elem, int *d_ptr)
-{
-   char ch;
-   int d, n;
-   unsigned int len;
-   char *lbeg, *lend;
-
-   d = *d_ptr;
-
-   len = strlen (elem);
-
-   n = 1;
-   lend = list;
-
-   while (1)
-     {
-	lbeg = lend;
-	while ((0 != (ch = *lend)) && (ch != (char) d)) lend++;
-
-	if ((lbeg + len == lend)
-	    && (0 == strncmp (elem, lbeg, len)))
-	  break;
-
-	if (ch == 0)
-	  {
-	     n = 0;
-	     break;
-	  }
-	lend++;			       /* skip delim */
-	n++;
-     }
-
-   return n;
-}
-
-/*}}}*/
-
-/* Regular expression routines for strings */
-static SLRegexp_Type regexp_reg;
-
-static int string_match_cmd (char *str, char *pat, int *nptr) /*{{{*/
-{
-   int n;
-   unsigned int len;
-   unsigned char rbuf[512], *match;
-
-   n = *nptr;
-
-   regexp_reg.case_sensitive = 1;
-   regexp_reg.buf = rbuf;
-   regexp_reg.pat = (unsigned char *) pat;
-   regexp_reg.buf_len = sizeof (rbuf);
-
-   if (SLang_regexp_compile (&regexp_reg))
-     {
-	SLang_verror (SL_INVALID_PARM, "Unable to compile pattern");
-	return -1;
-     }
-
-   n--;
-   len = strlen(str);
-   if ((n < 0) || ((unsigned int) n >= len))
-     {
-	/* SLang_Error = SL_INVALID_PARM; */
-	return 0;
-     }
-
-   str += n;
-   len -= n;
-
-   if (NULL == (match = SLang_regexp_match((unsigned char *) str, len, &regexp_reg)))
-     return 0;
-
-   /* adjust offsets */
-   regexp_reg.offset = n;
-
-   return (1 + (int) ((char *) match - str));
-}
-
-/*}}}*/
-
-static int string_match_nth_cmd (int *nptr) /*{{{*/
-{
-   int n, beg;
-
-   n = *nptr;
-
-   if ((n < 0) || (n > 9) || (regexp_reg.pat == NULL)
-       || ((beg = regexp_reg.beg_matches[n]) == -1))
-     {
-	SLang_Error = SL_INVALID_PARM;
-	return -1;
-     }
-   SLang_push_integer(beg + regexp_reg.offset);
-   return regexp_reg.end_matches[n];
-}
-
-/*}}}*/
-
-static char *create_delimited_string (char **list, unsigned int n, 
-				      char *delim)
-{
-   unsigned int len, dlen;
-   unsigned int i;
-   unsigned int num;
-   char *str, *s;
-
-   len = 1;			       /* allow room for \0 char */
-   num = 0;
-   for (i = 0; i < n; i++)
-     {
-	if (list[i] == NULL) continue;
-	len += strlen (list[i]);
-	num++;
-     }
-
-   dlen = strlen (delim);
-   if (num > 1)
-     len += (num - 1) * dlen;
-
-   if (NULL == (str = SLmalloc (len)))
-     return NULL;
-
-   *str = 0;
-   s = str;
-   i = 0;
-	
-   while (num > 1)
-     {
-	while (list[i] == NULL)
-	  i++;
-	
-	strcpy (s, list[i]);
-	s += strlen (list[i]);
-	strcpy (s, delim);
-	s += dlen;
-	i++;
-	num--;
-     }
-   
-   if (num)
-     {
-	while (list[i] == NULL)
-	  i++;
-	
-	strcpy (s, list[i]);
-     }
-   
-   return str;
-}
-
-static void create_delimited_string_cmd (int *nptr)
-{
-   unsigned int n, i;
-   char **strings;
-   char *str;
-
-   str = NULL;
-
-   n = 1 + (unsigned int) *nptr;       /* n includes delimiter */
-
-   if (NULL == (strings = (char **)SLmalloc (n * sizeof (char *))))
-     {
-	SLdo_pop_n (n);
-	return;
-     }
-   memset((char *)strings, 0, n * sizeof (char *));
-
-   i = n;
-   while (i != 0)
-     {
-	i--;
-	if (-1 == SLang_pop_slstring (strings + i))
-	  goto return_error;
-     }
-
-   str = create_delimited_string (strings + 1, (n - 1), strings[0]);
-   /* drop */
-   return_error:
-   for (i = 0; i < n; i++) SLang_free_slstring (strings[i]);
-   SLfree ((char *)strings);
-
-   (void) SLang_push_malloced_string (str);   /* NULL Ok */
-}
-
-static void strjoin_cmd (char *delim)
-{
-   SLang_Array_Type *at;
-   char *str;
-
-   if (-1 == SLang_pop_array_of_type (&at, SLANG_STRING_TYPE))
-     return;
-   
-   str = create_delimited_string ((char **)at->data, at->num_elements, delim);
-   SLang_free_array (at);
-   (void) SLang_push_malloced_string (str);   /* NULL Ok */
-}
-
-static void str_delete_chars_cmd (char *s, char *d)
-{
-   unsigned char lut[256];
-   unsigned char *s1, *s2;
-   unsigned char ch;
-
-   make_lut ((unsigned char *)d, lut);
-   if (NULL == (s = SLmake_string (s)))
-     return;
-
-   s1 = s2 = (unsigned char *) s;
-   while ((ch = *s2++) != 0)
-     {
-	if (0 == lut[ch])
-	  *s1++ = ch;
-     }
-   *s1 = 0;
-   
-   (void) SLang_push_malloced_string (s);
-}
-
-static unsigned char *make_lut_string (unsigned char *s)
-{
-   unsigned char lut[256];
-   unsigned char *l;
-   unsigned int i;
-
-   /* Complement-- a natural order is imposed */
-   make_lut (s, lut);
-   l = lut;
-   for (i = 1; i < 256; i++)
-     {
-	if (lut[i])
-	  *l++ = (unsigned char) i;
-     }
-   *l = 0;
-   return (unsigned char *) SLmake_string ((char *)lut);
-}
-
-static unsigned char *make_str_range (unsigned char *s)
-{
-   unsigned char *s1, *range;
-   unsigned int num;
-   unsigned char ch;
-   int len;
-
-   if (*s == '^')
-     return make_lut_string (s);
-
-   num = 0;
-   s1 = s;
-   while ((ch = *s1++) != 0)
-     {
-	unsigned char ch1;
-
-	ch1 = *s1;
-	if (ch1 == '-')
-	  {
-	     s1++;
-	     ch1 = *s1;
-	     len = (int)ch1 - (int)ch;
-	     if (len < 0)
-	       len = -len;
-	     
-	     num += (unsigned int) len;
-	     if (ch1 != 0)
-	       s1++;
-	  }
-
-	num++;
-     }
-   
-   range = (unsigned char *)SLmalloc (num + 1);
-   if (range == NULL)
-     return NULL;
-   
-   s1 = s;
-   s = range;
-   while ((ch = *s1++) != 0)
-     {
-	unsigned char ch1;
-	unsigned int i;
-
-	ch1 = *s1;
-	if (ch1 != '-')
-	  {
-	     *s++ = ch;
-	     continue;
-	  }
-
-	s1++;
-	ch1 = *s1;
-	
-	if (ch > ch1)
-	  {
-	     if (ch1 == 0)
-	       ch1 = 1;
-
-	     for (i = (unsigned int) ch; i >= (unsigned int) ch1; i--)
-	       *s++ = (unsigned char) i;
-	     
-	     if (*s1 == 0)
-	       break;
-	  }
-	else
-	  {
-	     for (i = (unsigned int) ch; i <= (unsigned int) ch1; i++)
-	       *s++ = (unsigned char) i;
-	  }
-	s1++;
-     }
-   
-#if 0
-   if (range + num != s)
-     SLang_verror (SL_INTERNAL_ERROR, "make_str_range: num wrong");
-#endif
-   *s = 0;
-
-   return range;
-}
-
-static void strtrans_cmd (char *s, unsigned char *from, unsigned char *to)
-{
-   unsigned char map[256];
-   char *s1;
-   unsigned int i;
-   unsigned char ch;
-   unsigned char last_to;
-   unsigned char *from_range, *to_range;
-
-   for (i = 0; i < 256; i++) map[i] = (unsigned char) i;
-
-   if (*to == 0)
-     {
-	str_delete_chars_cmd (s, (char *)from);
-	return;
-     }
-
-   from_range = make_str_range (from);
-   if (from_range == NULL)
-     return;
-   to_range = make_str_range (to);
-   if (to_range == NULL)
-     {
-	SLfree ((char *)from_range);
-	return;
-     }
-
-   from = from_range;
-   to = to_range;
-
-   last_to = 0;
-   while ((ch = *from++) != 0)
-     {
-	unsigned char to_ch;
-
-	if (0 == (to_ch = *to++))
-	  {
-	     do
-	       {
-		  map[ch] = last_to;
-	       }
-	     while (0 != (ch = *from++));
-	     break;
-	  }
-	
-	last_to = map[ch] = to_ch;
-     }
-
-   SLfree ((char *)from_range);
-   SLfree ((char *)to_range);
-
-   s = SLmake_string (s);
-   if (s == NULL)
-     return;
-
-   s1 = s;
-   while ((ch = (unsigned char) *s1) != 0)
-     *s1++ = (char) map[ch];
-   
-   (void) SLang_push_malloced_string (s);
-}
-
-
-static SLang_Intrin_Fun_Type Strops_Table [] = /*{{{*/
-{
-   MAKE_INTRINSIC_I("create_delimited_string",  create_delimited_string_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SS("strcmp",  strcmp_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_SSI("strncmp",  strncmp_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_0("strcat",  strcat_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("strlen",  strlen_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_SII("strchop", strchop_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SII("strchopr", strchopr_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_I("strreplace", strreplace_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_SSS("str_replace", str_replace_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_SII("substr",  substr_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SS("is_substr",  issubstr_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_II("strsub",  strsub_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SII("extract_element", extract_element_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SSI("is_list_element", is_list_element_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_SSI("string_match", string_match_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_I("string_match_nth", string_match_nth_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_0("strlow", strlow_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_I("tolower", tolower_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_I("toupper", toupper_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_0("strup", strup_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("isdigit",  isdigit_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_S("strtrim", strtrim_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("strtrim_end", strtrim_end_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("strtrim_beg", strtrim_beg_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("strcompress", strcompress_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_I("Sprintf", sprintf_n_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("sprintf", sprintf_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("sscanf", _SLang_sscanf, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_S("make_printable_string", make_printable_string, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SSI("str_quote_string", str_quote_string_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SSS("str_uncomment_string", str_uncomment_string_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_II("define_case", SLang_define_case, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("strtok", strtok_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("strjoin", strjoin_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SSS("strtrans", strtrans_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SS("str_delete_chars", str_delete_chars_cmd, SLANG_VOID_TYPE),
-
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-/*}}}*/
-
-int _SLang_init_slstrops (void)
-{
-   return SLadd_intrin_fun_table (Strops_Table, NULL);
-}
diff --git a/mdk-stage1/slang/slstruct.c b/mdk-stage1/slang/slstruct.c
deleted file mode 100644
index 33d182373..000000000
--- a/mdk-stage1/slang/slstruct.c
+++ /dev/null
@@ -1,932 +0,0 @@
-/* Structure type implementation */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#define SL_APP_WANTS_FOREACH
-#include "slang.h"
-#include "_slang.h"
-
-void _SLstruct_delete_struct (_SLang_Struct_Type *s)
-{
-   _SLstruct_Field_Type *field, *field_max;
-
-   if (s == NULL) return;
-
-   if (s->num_refs > 1)
-     {
-	s->num_refs -= 1;
-	return;
-     }
-
-   field = s->fields;
-   if (field != NULL)
-     {
-	field_max = field + s->nfields;
-
-	while (field < field_max)
-	  {
-	     SLang_free_object (&field->obj);
-	     SLang_free_slstring (field->name);   /* could be NULL */
-	     field++;
-	  }
-	SLfree ((char *) s->fields);
-     }
-   SLfree ((char *) s);
-}
-
-static _SLang_Struct_Type *allocate_struct (unsigned int nfields)
-{
-   _SLang_Struct_Type *s;
-   _SLstruct_Field_Type *f;
-   unsigned int i, size;
-
-   s = (_SLang_Struct_Type *) SLmalloc (sizeof (_SLang_Struct_Type));
-   if (s == NULL) return NULL;
-
-   SLMEMSET((char *) s, 0, sizeof (_SLang_Struct_Type));
-
-   size = nfields * sizeof(_SLstruct_Field_Type);
-   if (NULL == (f = (_SLstruct_Field_Type *) SLmalloc (size)))
-     {
-	SLfree ((char *) s);
-	return NULL;
-     }
-   SLMEMSET ((char *) f, 0, size);
-   s->nfields = nfields;
-   s->fields = f;
-
-   /* By default, all structs will be created with elements set to NULL.  I
-    * do not know whether or not it is better to use SLANG_UNDEFINED_TYPE.
-    */
-   for (i = 0; i < nfields; i++)
-     f[i].obj.data_type = SLANG_NULL_TYPE;
-
-   return s;
-}
-
-static int push_struct_of_type (unsigned char type, _SLang_Struct_Type *s)
-{
-   SLang_Object_Type obj;
-
-   obj.data_type = type;
-   obj.v.struct_val = s;
-   s->num_refs += 1;
-
-   if (0 == SLang_push (&obj))
-     return 0;
-
-   s->num_refs -= 1;
-   return -1;
-}
-
-int _SLang_push_struct (_SLang_Struct_Type *s)
-{
-   return push_struct_of_type (SLANG_STRUCT_TYPE, s);
-}
-
-int _SLang_pop_struct (_SLang_Struct_Type **sp)
-{
-   SLang_Object_Type obj;
-   SLang_Class_Type *cl;
-   unsigned char type;
-
-   if (0 != SLang_pop (&obj))
-     return -1;
-
-   type = obj.data_type;
-   if (type != SLANG_STRUCT_TYPE)
-     {
-	cl = _SLclass_get_class (type);
-	if (cl->cl_struct_def == NULL)
-	  {
-	     *sp = NULL;
-	     SLang_free_object (&obj);
-	     SLang_verror (SL_TYPE_MISMATCH,
-			   "Expecting struct type object.  Found %s",
-			   cl->cl_name);
-	     return -1;
-	  }
-     }
-
-   *sp = obj.v.struct_val;
-   return 0;
-}
-
-static void struct_destroy (unsigned char type, VOID_STAR vs)
-{
-   (void) type;
-   _SLstruct_delete_struct (*(_SLang_Struct_Type **) vs);
-}
-
-static int struct_push (unsigned char type, VOID_STAR ptr)
-{
-   return push_struct_of_type (type, *(_SLang_Struct_Type **) ptr);
-}
-
-static _SLstruct_Field_Type *find_field (_SLang_Struct_Type *s, char *name)
-{
-   _SLstruct_Field_Type *f, *fmax;
-
-   f = s->fields;
-   fmax = f + s->nfields;
-
-   while (f < fmax)
-     {
-	/* Since both these are slstrings, only compare pointer */
-	if (name == f->name)
-	  return f;
-
-	f++;
-     }
-
-   return NULL;
-}
-
-static _SLstruct_Field_Type *pop_field (_SLang_Struct_Type *s, char *name)
-{
-   _SLstruct_Field_Type *f;
-
-   f = find_field (s, name);
-   if (f == NULL)
-     SLang_verror (SL_SYNTAX_ERROR, "struct has no field named %s", name);
-   return f;
-}
-
-int SLstruct_create_struct (unsigned int nfields,
-			    char **field_names,
-			    unsigned char *field_types,
-			    VOID_STAR *field_values)
-{
-   _SLang_Struct_Type *s;
-   _SLstruct_Field_Type *f;
-   unsigned int i;
-
-   if (NULL == (s = allocate_struct (nfields)))
-     return -1;
-
-   f = s->fields;
-   for (i = 0; i < nfields; i++)
-     {
-	unsigned char type;
-	SLang_Class_Type *cl;
-	VOID_STAR value;
-	char *name = field_names [i];
-
-	if (name == NULL)
-	  {
-	     SLang_verror (SL_INVALID_PARM, "A struct field name cannot be NULL");
-	     goto return_error;
-	  }
-
-	if (NULL == (f->name = SLang_create_slstring (name)))
-	  goto return_error;
-
-	if ((field_values == NULL)
-	    || (NULL == (value = field_values [i])))
-	  {
-	     f++;
-	     continue;
-	  }
-
-	type = field_types[i];
-	cl = _SLclass_get_class (type);
-
-	if ((-1 == (cl->cl_push (type, value)))
-	    || (-1 == SLang_pop (&f->obj)))
-	  goto return_error;
-
-	f++;
-     }
-
-   if (0 == _SLang_push_struct (s))
-     return 0;
-   /* drop */
-
-   return_error:
-   _SLstruct_delete_struct (s);
-   return -1;
-}
-
-/* Interpreter interface */
-
-int _SLstruct_define_struct (void)
-{
-   int nfields;
-   _SLang_Struct_Type *s;
-   _SLstruct_Field_Type *f;
-
-   if (-1 == SLang_pop_integer (&nfields))
-     return -1;
-
-   if (nfields <= 0)
-     {
-	SLang_verror (SL_INVALID_PARM, "Number of struct fields must be > 0");
-	return -1;
-     }
-
-   if (NULL == (s = allocate_struct (nfields)))
-     return -1;
-
-   f = s->fields;
-   while (nfields)
-     {
-	char *name;
-
-	nfields--;
-	if (-1 == SLang_pop_slstring (&name))
-	  {
-	     _SLstruct_delete_struct (s);
-	     return -1;
-	  }
-	f[nfields].name = name;
-     }
-
-   if (-1 == _SLang_push_struct (s))
-     {
-	_SLstruct_delete_struct (s);
-	return -1;
-     }
-   return 0;
-}
-
-/* Simply make a struct that contains the same fields as struct s.  Do not
- * duplicate the field values.
- */
-static _SLang_Struct_Type *make_struct_shell (_SLang_Struct_Type *s)
-{
-   _SLang_Struct_Type *new_s;
-   _SLstruct_Field_Type *new_f, *old_f;
-   unsigned int i, nfields;
-
-   nfields = s->nfields;
-   if (NULL == (new_s = allocate_struct (nfields)))
-     return NULL;
-
-   new_f = new_s->fields;
-   old_f = s->fields;
-
-   for (i = 0; i < nfields; i++)
-     {
-	if (NULL == (new_f[i].name = SLang_create_slstring (old_f[i].name)))
-	  {
-	     _SLstruct_delete_struct (new_s);
-	     return NULL;
-	  }
-     }
-   return new_s;
-}
-
-static int struct_init_array_object (unsigned char type, VOID_STAR addr)
-{
-   SLang_Class_Type *cl;
-   _SLang_Struct_Type *s;
-
-   cl = _SLclass_get_class (type);
-   if (NULL == (s = make_struct_shell (cl->cl_struct_def)))
-     return -1;
-
-   s->num_refs = 1;
-   *(_SLang_Struct_Type **) addr = s;
-   return 0;
-}
-
-static int
-typedefed_struct_datatype_deref (unsigned char type)
-{
-   SLang_Class_Type *cl;
-   _SLang_Struct_Type *s;
-
-   cl = _SLclass_get_class (type);
-   if (NULL == (s = make_struct_shell (cl->cl_struct_def)))
-     return -1;
-
-   if (-1 == push_struct_of_type (type, s))
-     {
-	_SLstruct_delete_struct (s);
-	return -1;
-     }
-
-   return 0;
-}
-
-static _SLang_Struct_Type *duplicate_struct (_SLang_Struct_Type *s)
-{
-   _SLang_Struct_Type *new_s;
-   _SLstruct_Field_Type *new_f, *f, *fmax;
-
-   new_s = make_struct_shell (s);
-
-   if (new_s == NULL)
-     return NULL;
-
-   f = s->fields;
-   fmax = f + s->nfields;
-   new_f = new_s->fields;
-
-   while (f < fmax)
-     {
-	SLang_Object_Type *obj;
-
-	obj = &f->obj;
-	if (obj->data_type != SLANG_UNDEFINED_TYPE)
-	  {
-	     if ((-1 == _SLpush_slang_obj (obj))
-		 || (-1 == SLang_pop (&new_f->obj)))
-	       {
-		  _SLstruct_delete_struct (new_s);
-		  return NULL;
-	       }
-	  }
-	new_f++;
-	f++;
-     }
-
-   return new_s;
-}
-
-static int struct_dereference (unsigned char type, VOID_STAR addr)
-{
-   _SLang_Struct_Type *s;
-
-   if (NULL == (s = duplicate_struct (*(_SLang_Struct_Type **) addr)))
-     return -1;
-
-   if (-1 == push_struct_of_type (type, s))
-     {
-	_SLstruct_delete_struct (s);
-	return -1;
-     }
-
-   return 0;
-}
-
-/*{{{ foreach */
-
-struct _SLang_Foreach_Context_Type
-{
-   _SLang_Struct_Type *s;
-   char *next_field_name;
-};
-
-static SLang_Foreach_Context_Type *
-struct_foreach_open (unsigned char type, unsigned int num)
-{
-   SLang_Foreach_Context_Type *c;
-   _SLang_Struct_Type *s;
-   char *next_name;
-
-   (void) type;
-
-   if (-1 == _SLang_pop_struct (&s))
-     return NULL;
-
-   switch (num)
-     {
-      case 0:
-	next_name = SLang_create_slstring ("next");
-	break;
-
-      case 1:
-	if (-1 == SLang_pop_slstring (&next_name))
-	  next_name = NULL;
-	break;
-
-      default:
-	next_name = NULL;
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "'foreach (Struct_Type) using' requires single control value");
-	SLdo_pop_n (num);
-	break;
-     }
-
-   if (next_name == NULL)
-     {
-	_SLstruct_delete_struct (s);
-	return NULL;
-     }
-
-   c = (SLang_Foreach_Context_Type *)SLmalloc (sizeof (SLang_Foreach_Context_Type));
-   if (c == NULL)
-     {
-	_SLstruct_delete_struct (s);
-	SLang_free_slstring (next_name);
-	return NULL;
-     }
-   memset ((char *) c, 0, sizeof (SLang_Foreach_Context_Type));
-
-   c->next_field_name = next_name;
-   c->s = s;
-
-   return c;
-}
-
-static void struct_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   (void) type;
-   if (c == NULL) return;
-
-   SLang_free_slstring (c->next_field_name);
-   if (c->s != NULL) _SLstruct_delete_struct (c->s);
-   SLfree ((char *) c);
-}
-
-static int struct_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   _SLstruct_Field_Type *f;
-   _SLang_Struct_Type *next_s;
-
-   (void) type;
-
-   if (c == NULL)
-     return -1;
-
-   if (c->s == NULL)
-     return 0;			       /* done */
-
-   if (-1 == _SLang_push_struct (c->s))
-     return -1;
-
-   /* Now get the next one ready for the next foreach loop */
-
-   next_s = NULL;
-   if (NULL != (f = find_field (c->s, c->next_field_name)))
-     {
-	SLang_Class_Type *cl;
-
-	cl = _SLclass_get_class (f->obj.data_type);
-	/* Note that I cannot simply look for SLANG_STRUCT_TYPE since the
-	 * user may have typedefed another struct type.  So, look at the
-	 * class methods.
-	 */
-	if (cl->cl_foreach_open == struct_foreach_open)
-	  {
-	     next_s = f->obj.v.struct_val;
-	     next_s->num_refs += 1;
-	  }
-     }
-
-   _SLstruct_delete_struct (c->s);
-   c->s = next_s;
-
-   /* keep going */
-   return 1;
-}
-
-/*}}}*/
-
-static int struct_sput (unsigned char type, char *name)
-{
-   _SLang_Struct_Type *s;
-   _SLstruct_Field_Type *f;
-   SLang_Object_Type obj;
-
-   (void) type;
-
-   if (-1 == _SLang_pop_struct (&s))
-     return -1;
-
-   if ((NULL == (f = pop_field (s, name)))
-       || (-1 == SLang_pop (&obj)))
-     {
-	_SLstruct_delete_struct (s);
-	return -1;
-     }
-
-   SLang_free_object (&f->obj);
-   f->obj = obj;
-   _SLstruct_delete_struct (s);
-   return 0;
-}
-
-static int struct_sget (unsigned char type, char *name)
-{
-   _SLang_Struct_Type *s;
-   _SLstruct_Field_Type *f;
-   int ret;
-
-   (void) type;
-
-   if (-1 == _SLang_pop_struct (&s))
-     return -1;
-
-   if (NULL == (f = pop_field (s, name)))
-     {
-	_SLstruct_delete_struct (s);
-	return -1;
-     }
-
-   ret = _SLpush_slang_obj (&f->obj);
-   _SLstruct_delete_struct (s);
-   return ret;
-}
-
-static int struct_typecast
-  (unsigned char a_type, VOID_STAR ap, unsigned int na,
-   unsigned char b_type, VOID_STAR bp)
-{
-   _SLang_Struct_Type **a, **b;
-   unsigned int i;
-   
-   (void) a_type;
-   (void) b_type;
-
-   a = (_SLang_Struct_Type **) ap;
-   b = (_SLang_Struct_Type **) bp;
-   for (i = 0; i < na; i++)
-     {
-	b[i] = a[i];
-	if (a[i] != NULL)
-	  a[i]->num_refs += 1;
-     }
-
-   return 1;
-}
-
-int _SLstruct_define_typedef (void)
-{
-   char *type_name;
-   _SLang_Struct_Type *s, *s1;
-   SLang_Class_Type *cl;
-
-   if (-1 == SLang_pop_slstring (&type_name))
-     return -1;
-
-   if (-1 == _SLang_pop_struct (&s))
-     {
-	SLang_free_slstring (type_name);
-	return -1;
-     }
-
-   if (NULL == (s1 = make_struct_shell (s)))
-     {
-	SLang_free_slstring (type_name);
-	_SLstruct_delete_struct (s);
-	return -1;
-     }
-
-   _SLstruct_delete_struct (s);
-
-   if (NULL == (cl = SLclass_allocate_class (type_name)))
-     {
-	SLang_free_slstring (type_name);
-	_SLstruct_delete_struct (s1);
-	return -1;
-     }
-   SLang_free_slstring (type_name);
-
-   cl->cl_struct_def = s1;
-   cl->cl_init_array_object = struct_init_array_object;
-   cl->cl_datatype_deref = typedefed_struct_datatype_deref;
-   cl->cl_destroy = struct_destroy;
-   cl->cl_push = struct_push;
-   cl->cl_dereference = struct_dereference;
-   cl->cl_foreach_open = struct_foreach_open;
-   cl->cl_foreach_close = struct_foreach_close;
-   cl->cl_foreach = struct_foreach;
-
-   cl->cl_sget = struct_sget;
-   cl->cl_sput = struct_sput;
-
-   if (-1 == SLclass_register_class (cl,
-				     SLANG_VOID_TYPE,   /* any open slot */
-				     sizeof (_SLang_Struct_Type),
-				     SLANG_CLASS_TYPE_PTR))
-     {
-	/* FIXME: Priority=low */
-	/* There is a memory leak here if this fails... */
-	return -1;
-     }
-   /* Note: typecast from a user type struct type allowed but not the other
-    * way.
-    */
-   if (-1 == SLclass_add_typecast (cl->cl_data_type, SLANG_STRUCT_TYPE, struct_typecast, 1))
-     return -1;
-
-   return 0;
-}
-
-static int
-struct_datatype_deref (unsigned char stype)
-{
-   (void) stype;
-   
-   if (SLang_peek_at_stack () == SLANG_ARRAY_TYPE)
-     {
-	SLang_Array_Type *at;
-	int status;
-
-	if (-1 == SLang_pop_array_of_type (&at, SLANG_STRING_TYPE))
-	  return -1;
-	
-	status = SLstruct_create_struct (at->num_elements,
-					 (char **) at->data, NULL, NULL);
-
-	SLang_free_array (at);
-	return status;
-     }
-
-   SLang_push_integer (SLang_Num_Function_Args);
-   return _SLstruct_define_struct ();
-}
-
-static int register_struct (void)
-{
-   SLang_Class_Type *cl;
-
-   if (NULL == (cl = SLclass_allocate_class ("Struct_Type")))
-     return -1;
-
-   (void) SLclass_set_destroy_function (cl, struct_destroy);
-   (void) SLclass_set_push_function (cl, struct_push);
-   cl->cl_dereference = struct_dereference;
-   cl->cl_datatype_deref = struct_datatype_deref;
-
-   cl->cl_foreach_open = struct_foreach_open;
-   cl->cl_foreach_close = struct_foreach_close;
-   cl->cl_foreach = struct_foreach;
-
-   cl->cl_sget = struct_sget;
-   cl->cl_sput = struct_sput;
-
-   if (-1 == SLclass_register_class (cl, SLANG_STRUCT_TYPE, sizeof (_SLang_Struct_Type),
-				     SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   return 0;
-}
-
-static void get_struct_field_names (_SLang_Struct_Type *s)
-{
-   SLang_Array_Type *a;
-   char **data;
-   int i, nfields;
-   _SLstruct_Field_Type *f;
-
-   nfields = (int) s->nfields;
-
-   if (NULL == (a = SLang_create_array (SLANG_STRING_TYPE, 0, NULL, &nfields, 1)))
-     return;
-
-   f = s->fields;
-   data = (char **) a->data;
-   for (i = 0; i < nfields; i++)
-     {
-	/* Since we are dealing with hashed strings, the next call should not
-	 * fail.  If it does, the interpreter will handle it at some other
-	 * level.
-	 */
-	data [i] = SLang_create_slstring (f[i].name);
-     }
-
-   SLang_push_array (a, 1);
-}
-
-static int push_struct_fields (_SLang_Struct_Type *s)
-{
-   _SLstruct_Field_Type *f, *fmax;
-   int num;
-
-   f = s->fields;
-   fmax = f + s->nfields;
-
-   num = 0;
-   while (fmax > f)
-     {
-	fmax--;
-	if (-1 == _SLpush_slang_obj (&fmax->obj))
-	  break;
-
-	num++;
-     }
-
-   return num;
-}
-
-/* Syntax: set_struct_field (s, name, value); */
-static void struct_set_field (void)
-{
-   _SLang_Struct_Type *s;
-   _SLstruct_Field_Type *f;
-   SLang_Object_Type obj;
-   char *name;
-
-   if (-1 == SLang_pop (&obj))
-     return;
-
-   if (-1 == SLang_pop_slstring (&name))
-     {
-	SLang_free_object (&obj);
-	return;
-     }
-
-   if (-1 == _SLang_pop_struct (&s))
-     {
-	SLang_free_slstring (name);
-	SLang_free_object (&obj);
-	return;
-     }
-
-   if (NULL == (f = pop_field (s, name)))
-     {
-	_SLstruct_delete_struct (s);
-	SLang_free_slstring (name);
-	SLang_free_object (&obj);
-	return;
-     }
-
-   SLang_free_object (&f->obj);
-   f->obj = obj;
-
-   _SLstruct_delete_struct (s);
-   SLang_free_slstring (name);
-}
-
-/* Syntax: set_struct_fields (s, values....); */
-static void set_struct_fields (void)
-{
-   unsigned int n;
-   _SLang_Struct_Type *s;
-   _SLstruct_Field_Type *f;
-
-   n = (unsigned int) SLang_Num_Function_Args;
-
-   if (-1 == SLreverse_stack (n))
-     return;
-
-   n--;
-   if (-1 == _SLang_pop_struct (&s))
-     {
-	SLdo_pop_n (n);
-	return;
-     }
-
-   if (n > s->nfields)
-     {
-	SLdo_pop_n (n);
-	SLang_verror (SL_INVALID_PARM, "Too many values for structure");
-	_SLstruct_delete_struct (s);
-	return;
-     }
-
-   f = s->fields;
-   while (n > 0)
-     {
-	SLang_Object_Type obj;
-
-	if (-1 == SLang_pop (&obj))
-	  break;
-
-	SLang_free_object (&f->obj);
-	f->obj = obj;
-
-	f++;
-	n--;
-     }
-
-   _SLstruct_delete_struct (s);
-}
-
-static void get_struct_field (char *name)
-{
-   (void) struct_sget (0, name);
-}
-
-static int is_struct_type (void)
-{
-   SLang_Object_Type obj;
-   unsigned char type;
-   int status;
-
-   if (-1 == SLang_pop (&obj))
-     return -1;
-   
-   type = obj.data_type;
-   if (type == SLANG_STRUCT_TYPE)
-     status = 1;
-   else
-     status = (NULL != _SLclass_get_class (type)->cl_struct_def);
-   SLang_free_object (&obj);
-   return status;
-}	
-   
-     
-static SLang_Intrin_Fun_Type Struct_Table [] =
-{
-   MAKE_INTRINSIC_1("get_struct_field_names", get_struct_field_names, SLANG_VOID_TYPE, SLANG_STRUCT_TYPE),
-   MAKE_INTRINSIC_1("get_struct_field", get_struct_field, SLANG_VOID_TYPE, SLANG_STRING_TYPE),
-   MAKE_INTRINSIC_1("_push_struct_field_values", push_struct_fields, SLANG_INT_TYPE, SLANG_STRUCT_TYPE),
-   MAKE_INTRINSIC_0("set_struct_field", struct_set_field, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("set_struct_fields", set_struct_fields, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("is_struct_type", is_struct_type, SLANG_INT_TYPE),
-   /* MAKE_INTRINSIC_I("_create_struct", create_struct, SLANG_VOID_TYPE), */
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-int _SLstruct_init (void)
-{
-   if ((-1 == SLadd_intrin_fun_table (Struct_Table, NULL))
-       || (-1 == register_struct ()))
-     return -1;
-
-   return 0;
-}
-
-void _SLstruct_pop_args (int *np)
-{
-   SLang_Array_Type *at;
-   int i, n;
-   _SLang_Struct_Type **data;
-
-   n = *np;
-
-   if (n < 0)
-     {
-	SLang_Error = SL_INVALID_PARM;
-	return;
-     }
-
-   data = (_SLang_Struct_Type **) SLmalloc ((n + 1) * sizeof (_SLang_Struct_Type *));
-   if (data == NULL)
-     {
-	SLdo_pop_n (n);
-	return;
-     }
-
-   memset ((char *)data, 0, n * sizeof (_SLang_Struct_Type *));
-
-   i = n;
-   while (i > 0)
-     {
-	_SLang_Struct_Type *s;
-	_SLstruct_Field_Type *f;
-
-	i--;
-
-	if (NULL == (s = allocate_struct (1)))
-	  goto return_error;
-
-	data[i] = s;
-	s->num_refs += 1;	       /* keeping a copy */
-
-	f = s->fields;
-	if (NULL == (f->name = SLang_create_slstring ("value")))
-	  goto return_error;
-
-	if (-1 == SLang_pop (&f->obj))
-	  goto return_error;
-     }
-
-   if (NULL == (at = SLang_create_array (SLANG_STRUCT_TYPE, 0,
-					 (VOID_STAR) data, &n, 1)))
-     goto return_error;
-
-   (void) SLang_push_array (at, 1);
-   return;
-
-   return_error:
-   for (i = 0; i < n; i++)
-     {
-	_SLang_Struct_Type *s;
-
-	s = data[i];
-	if (s != NULL)
-	  _SLstruct_delete_struct (s);
-     }
-
-   SLfree ((char *) data);
-}
-
-void _SLstruct_push_args (SLang_Array_Type *at)
-{
-   _SLang_Struct_Type **sp;
-   unsigned int num;
-
-   if (at->data_type != SLANG_STRUCT_TYPE)
-     {
-	SLang_Error = SL_TYPE_MISMATCH;
-	return;
-     }
-
-   sp = (_SLang_Struct_Type **) at->data;
-   num = at->num_elements;
-
-   while ((SLang_Error == 0) && (num > 0))
-     {
-	_SLang_Struct_Type *s;
-
-	num--;
-	if (NULL == (s = *sp++))
-	  {
-	     SLang_push_null ();
-	     continue;
-	  }
-
-	/* I should check to see if the value field is present, but... */
-	(void) _SLpush_slang_obj (&s->fields->obj);
-     }
-}
diff --git a/mdk-stage1/slang/sltermin.c b/mdk-stage1/slang/sltermin.c
deleted file mode 100644
index f9c64f0b2..000000000
--- a/mdk-stage1/slang/sltermin.c
+++ /dev/null
@@ -1,1155 +0,0 @@
-/* This file contains enough terminfo reading capabilities sufficient for
- * the slang SLtt interface.
- */
-
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/*
- * The majority of the comments found in the file were taken from the
- * term(4) man page on an SGI.
- */
-
-/* Short integers are stored in two 8-bit bytes.  The first byte contains
- * the least significant 8 bits of the value, and the second byte contains
- * the most significant 8 bits.  (Thus, the value represented is
- * 256*second+first.)  The value -1 is represented by 0377,0377, and the
- * value -2 is represented by 0376,0377; other negative values are illegal.
- * The -1 generally means that a capability is missing from this terminal.
- * The -2 means that the capability has been cancelled in the terminfo
- * source and also is to be considered missing.
- */
-
-static int make_integer (unsigned char *buf)
-{
-   register int lo, hi;
-   lo = (int) *buf++; hi = (int) *buf;
-   if (hi == 0377)
-     {
-	if (lo == 0377) return -1;
-	if (lo == 0376) return -2;
-     }
-   return lo + 256 * hi;
-}
-
-/*
- * The compiled file is created from the source file descriptions of the
- * terminals (see the -I option of infocmp) by using the terminfo compiler,
- * tic, and read by the routine setupterm [see curses(3X).]  The file is
- * divided into six parts in the following order:  the header, terminal
- * names, boolean flags, numbers, strings, and string table.
- *
- * The header section begins the file.  This section contains six short
- * integers in the format described below.  These integers are (1) the magic
- * number (octal 0432); (2) the size, in bytes, of the names section; (3)
- * the number of bytes in the boolean section; (4) the number of short
- * integers in the numbers section; (5) the number of offsets (short
- * integers) in the strings section; (6) the size, in bytes, of the string
- * table.
- */
-
-#define MAGIC 0432
-
-/* In this structure, all char * fields are malloced EXCEPT if the
- * structure is SLTERMCAP.  In that case, only terminal_names is malloced
- * and the other fields are pointers into it.
- */
-struct _SLterminfo_Type
-{
-#define SLTERMINFO 1
-#define SLTERMCAP  2
-   unsigned int flags;
-
-   unsigned int name_section_size;
-   char *terminal_names;
-
-   unsigned int boolean_section_size;
-   unsigned char *boolean_flags;
-
-   unsigned int num_numbers;
-   unsigned char *numbers;
-
-   unsigned int num_string_offsets;
-   unsigned char *string_offsets;
-
-   unsigned int string_table_size;
-   char *string_table;
-
-};
-
-static char *tcap_getstr (char *, SLterminfo_Type *);
-static int tcap_getnum (char *, SLterminfo_Type *);
-static int tcap_getflag (char *, SLterminfo_Type *);
-static int tcap_getent (char *, SLterminfo_Type *);
-
-static FILE *open_terminfo (char *file, SLterminfo_Type *h)
-{
-   FILE *fp;
-   unsigned char buf[12];
-
-   /* Alan Cox reported a security problem here if the application using the
-    * library is setuid.  So, I need to make sure open the file as a normal
-    * user.  Unfortunately, there does not appear to be a portable way of
-    * doing this, so I am going to use 'setfsgid' and 'setfsuid', which
-    * are not portable.
-    *
-    * I will also look into the use of setreuid, seteuid and setregid, setegid.
-    * FIXME: Priority=medium
-    */
-   fp = fopen (file, "rb");
-   if (fp == NULL) return NULL;
-
-   if ((12 == fread ((char *) buf, 1, 12, fp) && (MAGIC == make_integer (buf))))
-     {
-	h->name_section_size = make_integer (buf + 2);
-	h->boolean_section_size = make_integer (buf + 4);
-	h->num_numbers = make_integer (buf + 6);
-	h->num_string_offsets = make_integer (buf + 8);
-	h->string_table_size = make_integer (buf + 10);
-     }
-   else
-     {
-	fclose (fp);
-	fp = NULL;
-     }
-   return fp;
-}
-
-/*
- * The terminal names section comes next.  It contains the first line of the
- * terminfo description, listing the various names for the terminal,
- * separated by the bar ( | ) character (see term(5)).  The section is
- * terminated with an ASCII NUL character.
- */
-
-/* returns pointer to malloced space */
-static unsigned char *read_terminfo_section (FILE *fp, unsigned int size)
-{
-   char *s;
-
-   if (NULL == (s = (char *) SLmalloc (size))) return NULL;
-   if (size != fread (s, 1, size, fp))
-     {
-	SLfree (s);
-	return NULL;
-     }
-   return (unsigned char *) s;
-}
-
-static char *read_terminal_names (FILE *fp, SLterminfo_Type *t)
-{
-   return t->terminal_names = (char *) read_terminfo_section (fp, t->name_section_size);
-}
-
-/*
- * The boolean flags have one byte for each flag.  This byte is either 0 or
- * 1 as the flag is present or absent.  The value of 2 means that the flag
- * has been cancelled.  The capabilities are in the same order as the file
- * <term.h>.
- */
-
-static unsigned char *read_boolean_flags (FILE *fp, SLterminfo_Type *t)
-{
-   /* Between the boolean section and the number section, a null byte is
-    * inserted, if necessary, to ensure that the number section begins on an
-    * even byte offset. All short integers are aligned on a short word
-    * boundary.
-    */
-
-   unsigned int size = (t->name_section_size + t->boolean_section_size) % 2;
-   size += t->boolean_section_size;
-
-   return t->boolean_flags = read_terminfo_section (fp, size);
-}
-
-/*
- * The numbers section is similar to the boolean flags section.  Each
- * capability takes up two bytes, and is stored as a short integer.  If the
- * value represented is -1 or -2, the capability is taken to be missing.
- */
-
-static unsigned char *read_numbers (FILE *fp, SLterminfo_Type *t)
-{
-   return t->numbers = read_terminfo_section (fp, 2 * t->num_numbers);
-}
-
-/* The strings section is also similar.  Each capability is stored as a
- * short integer, in the format above.  A value of -1 or -2 means the
- * capability is missing.  Otherwise, the value is taken as an offset from
- * the beginning of the string table.  Special characters in ^X or \c
- * notation are stored in their interpreted form, not the printing
- * representation.  Padding information ($<nn>) and parameter information
- * (%x) are stored intact in uninterpreted form.
- */
-
-static unsigned char *read_string_offsets (FILE *fp, SLterminfo_Type *t)
-{
-   return t->string_offsets = (unsigned char *) read_terminfo_section (fp, 2 * t->num_string_offsets);
-}
-
-/* The final section is the string table.  It contains all the values of
- * string capabilities referenced in the string section.  Each string is
- * null terminated.
- */
-
-static char *read_string_table (FILE *fp, SLterminfo_Type *t)
-{
-   return t->string_table = (char *) read_terminfo_section (fp, t->string_table_size);
-}
-
-/*
- * Compiled terminfo(4) descriptions are placed under the directory
- * /usr/share/lib/terminfo.  In order to avoid a linear search of a huge
- * UNIX system directory, a two-level scheme is used:
- * /usr/share/lib/terminfo/c/name where name is the name of the terminal,
- * and c is the first character of name.  Thus, att4425 can be found in the
- * file /usr/share/lib/terminfo/a/att4425.  Synonyms for the same terminal
- * are implemented by multiple links to the same compiled file.
- */
-
-#define MAX_TI_DIRS 7
-static char *Terminfo_Dirs [MAX_TI_DIRS] =
-{
-   NULL, /* $HOME/.terminfo */
-   NULL, /* $TERMINFO */
-   "/usr/share/terminfo",
-   "/usr/lib/terminfo",
-   "/usr/share/lib/terminfo",
-   "/etc/terminfo",
-   "/usr/local/lib/terminfo"
-};
-
-SLterminfo_Type *_SLtt_tigetent (char *term)
-{
-   char *tidir;
-   int i;
-   FILE *fp = NULL;
-   char file[1024];
-   static char home_ti [1024];
-   char *home;
-   SLterminfo_Type *ti;
-
-   if (
-       (term == NULL)
-#ifdef SLANG_UNTIC
-       && (SLang_Untic_Terminfo_File == NULL)
-#endif
-       )
-     return NULL;
-
-   if (NULL == (ti = (SLterminfo_Type *) SLmalloc (sizeof (SLterminfo_Type))))
-     {
-	return NULL;
-     }
-
-#ifdef SLANG_UNTIC
-   if (SLang_Untic_Terminfo_File != NULL)
-     {
-	fp = open_terminfo (SLang_Untic_Terminfo_File, ti);
-	goto fp_open_label;
-     }
-   else
-#endif
-   /* If we are on a termcap based system, use termcap */
-   if (0 == tcap_getent (term, ti)) return ti;
-
-   if (NULL != (home = getenv ("HOME")))
-     {
-	strncpy (home_ti, home, sizeof (home_ti) - 11);
-	home_ti [sizeof(home_ti) - 11] = 0;
-	strcat (home_ti, "/.terminfo");
-	Terminfo_Dirs [0] = home_ti;
-     }
-
-   Terminfo_Dirs[1] = getenv ("TERMINFO");
-   i = 0;
-   while (i < MAX_TI_DIRS)
-     {
-	tidir = Terminfo_Dirs[i];
-	if ((tidir != NULL)
-	    && (sizeof (file) > strlen (tidir) + 2 + strlen (term)))
-	  {
-	     sprintf (file, "%s/%c/%s", tidir, *term, term);
-	     if (NULL != (fp = open_terminfo (file, ti)))
-	       break;
-	  }
-	i++;
-     }
-#ifdef SLANG_UNTIC
-   fp_open_label:
-#endif
-
-   if (fp != NULL)
-     {
-	if (NULL != read_terminal_names (fp, ti))
-	  {
-	     if (NULL != read_boolean_flags (fp, ti))
-	       {
-		  if (NULL != read_numbers (fp, ti))
-		    {
-		       if (NULL != read_string_offsets (fp, ti))
-			 {
-			    if (NULL != read_string_table (fp, ti))
-			      {
-				 /* success */
-				 fclose (fp);
-				 ti->flags = SLTERMINFO;
-				 return ti;
-			      }
-			    SLfree ((char *)ti->string_offsets);
-			 }
-		       SLfree ((char *)ti->numbers);
-		    }
-		  SLfree ((char *)ti->boolean_flags);
-	       }
-	     SLfree ((char *)ti->terminal_names);
-	  }
-	fclose (fp);
-     }
-
-   SLfree ((char *)ti);
-   return NULL;
-}
-
-#ifdef SLANG_UNTIC
-# define UNTIC_COMMENT(x) ,x
-#else
-# define UNTIC_COMMENT(x)
-#endif
-
-typedef struct
-{
-   char name[3];
-   int offset;
-#ifdef SLANG_UNTIC
-   char *comment;
-#endif
-}
-Tgetstr_Map_Type;
-
-/* I need to add: K1-5, %0-5(not important), @8, &8... */
-static Tgetstr_Map_Type Tgetstr_Map [] =
-{
-   {"!1", 212		UNTIC_COMMENT("shifted key")},
-   {"!2", 213		UNTIC_COMMENT("shifted key")},
-   {"!3", 214		UNTIC_COMMENT("shifted key")},
-   {"#1", 198		UNTIC_COMMENT("shifted key")},
-   {"#2", 199		UNTIC_COMMENT("Key S-Home")},
-   {"#3", 200		UNTIC_COMMENT("Key S-Insert")},
-   {"#4", 201		UNTIC_COMMENT("Key S-Left")},
-   {"%0", 177		UNTIC_COMMENT("redo key")},
-   {"%1", 168		UNTIC_COMMENT("help key")},
-   {"%2", 169		UNTIC_COMMENT("mark key")},
-   {"%3", 170		UNTIC_COMMENT("message key")},
-   {"%4", 171		UNTIC_COMMENT("move key")},
-   {"%5", 172		UNTIC_COMMENT("next key")},
-   {"%6", 173		UNTIC_COMMENT("open key")},
-   {"%7", 174		UNTIC_COMMENT("options key")},
-   {"%8", 175		UNTIC_COMMENT("previous key")},
-   {"%9", 176		UNTIC_COMMENT("print key")},
-   {"%a", 202		UNTIC_COMMENT("shifted key")},
-   {"%b", 203		UNTIC_COMMENT("shifted key")},
-   {"%c", 204		UNTIC_COMMENT("Key S-Next")},
-   {"%d", 205		UNTIC_COMMENT("shifted key")},
-   {"%e", 206		UNTIC_COMMENT("Key S-Previous")},
-   {"%f", 207		UNTIC_COMMENT("shifted key")},
-   {"%g", 208		UNTIC_COMMENT("shifted key")},
-   {"%h", 209		UNTIC_COMMENT("shifted key")},
-   {"%i", 210		UNTIC_COMMENT("Key S-Right")},
-   {"%j", 211		UNTIC_COMMENT("shifted key")},
-   {"&0", 187		UNTIC_COMMENT("shifted key")},
-   {"&1", 178		UNTIC_COMMENT("reference key")},
-   {"&2", 179		UNTIC_COMMENT("refresh key")},
-   {"&3", 180		UNTIC_COMMENT("replace key")},
-   {"&4", 181		UNTIC_COMMENT("restart key")},
-   {"&5", 182		UNTIC_COMMENT("resume key")},
-   {"&6", 183		UNTIC_COMMENT("save key")},
-   {"&7", 184		UNTIC_COMMENT("suspend key")},
-   {"&8", 185		UNTIC_COMMENT("undo key")},
-   {"&9", 186		UNTIC_COMMENT("shifted key")},
-   {"*0", 197		UNTIC_COMMENT("shifted key")},
-   {"*1", 188		UNTIC_COMMENT("shifted key")},
-   {"*2", 189		UNTIC_COMMENT("shifted key")},
-   {"*3", 190		UNTIC_COMMENT("shifted key")},
-   {"*4", 191		UNTIC_COMMENT("Key S-Delete")},
-   {"*5", 192		UNTIC_COMMENT("shifted key")},
-   {"*6", 193		UNTIC_COMMENT("select key")},
-   {"*7", 194		UNTIC_COMMENT("Key S-End")},
-   {"*8", 195		UNTIC_COMMENT("shifted key")},
-   {"*9", 196		UNTIC_COMMENT("shifted key")},
-   {"@0", 167		UNTIC_COMMENT("find key")},
-   {"@1", 158		UNTIC_COMMENT("begin key")},
-   {"@2", 159		UNTIC_COMMENT("cancel key")},
-   {"@3", 160		UNTIC_COMMENT("close key")},
-   {"@4", 161		UNTIC_COMMENT("command key")},
-   {"@5", 162		UNTIC_COMMENT("copy key")},
-   {"@6", 163		UNTIC_COMMENT("create key")},
-   {"@7", 164 		UNTIC_COMMENT("Key End")},
-   {"@8", 165		UNTIC_COMMENT("enter/send key")},
-   {"@9", 166		UNTIC_COMMENT("exit key")},
-   {"AB", 360 		UNTIC_COMMENT("set ANSI color background")},
-   {"AF", 359 		UNTIC_COMMENT("set ANSI color foreground")},
-   {"AL", 110 		UNTIC_COMMENT("parm_insert_line")},
-   {"CC", 9		UNTIC_COMMENT("terminal settable cmd character in prototype !?")},
-   {"CM", 15		UNTIC_COMMENT("memory relative cursor addressing")},
-   {"CW", 277		UNTIC_COMMENT("define a window #1 from #2, #3 to #4, #5")},
-   {"DC", 105		UNTIC_COMMENT("delete #1 chars")},
-   {"DI", 280		UNTIC_COMMENT("dial number #1")},
-   {"DK", 275		UNTIC_COMMENT("display clock at (#1,#2)")},
-   {"DL", 106 		UNTIC_COMMENT("parm_delete_line")},
-   {"DO", 107		UNTIC_COMMENT("down #1 lines")},
-   {"F1", 216		UNTIC_COMMENT("key_f11")},
-   {"F2", 217		UNTIC_COMMENT("key_f12")},
-   {"F3", 218		UNTIC_COMMENT("key_f13")},
-   {"F4", 219		UNTIC_COMMENT("key_f14")},
-   {"F5", 220		UNTIC_COMMENT("key_f15")},
-   {"F6", 221		UNTIC_COMMENT("key_f16")},
-   {"F7", 222		UNTIC_COMMENT("key_f17")},
-   {"F8", 223		UNTIC_COMMENT("key_f18")},
-   {"F9", 224		UNTIC_COMMENT("key_f19")},
-   {"FA", 225		UNTIC_COMMENT("key_f20")},
-   {"FB", 226		UNTIC_COMMENT("F21 function key")},
-   {"FC", 227		UNTIC_COMMENT("F22 function key")},
-   {"FD", 228		UNTIC_COMMENT("F23 function key")},
-   {"FE", 229		UNTIC_COMMENT("F24 function key")},
-   {"FF", 230		UNTIC_COMMENT("F25 function key")},
-   {"FG", 231		UNTIC_COMMENT("F26 function key")},
-   {"FH", 232		UNTIC_COMMENT("F27 function key")},
-   {"FI", 233		UNTIC_COMMENT("F28 function key")},
-   {"FJ", 234		UNTIC_COMMENT("F29 function key")},
-   {"FK", 235		UNTIC_COMMENT("F30 function key")},
-   {"FL", 236		UNTIC_COMMENT("F31 function key")},
-   {"FM", 237		UNTIC_COMMENT("F32 function key")},
-   {"FN", 238		UNTIC_COMMENT("F33 function key")},
-   {"FO", 239		UNTIC_COMMENT("F34 function key")},
-   {"FP", 240		UNTIC_COMMENT("F35 function key")},
-   {"FQ", 241		UNTIC_COMMENT("F36 function key")},
-   {"FR", 242		UNTIC_COMMENT("F37 function key")},
-   {"FS", 243		UNTIC_COMMENT("F38 function key")},
-   {"FT", 244		UNTIC_COMMENT("F39 function key")},
-   {"FU", 245		UNTIC_COMMENT("F40 function key")},
-   {"FV", 246		UNTIC_COMMENT("F41 function key")},
-   {"FW", 247		UNTIC_COMMENT("F42 function key")},
-   {"FX", 248		UNTIC_COMMENT("F43 function key")},
-   {"FY", 249		UNTIC_COMMENT("F44 function key")},
-   {"FZ", 250		UNTIC_COMMENT("F45 function key")},
-   {"Fa", 251		UNTIC_COMMENT("F46 function key")},
-   {"Fb", 252		UNTIC_COMMENT("F47 function key")},
-   {"Fc", 253		UNTIC_COMMENT("F48 function key")},
-   {"Fd", 254		UNTIC_COMMENT("F49 function key")},
-   {"Fe", 255		UNTIC_COMMENT("F50 function key")},
-   {"Ff", 256		UNTIC_COMMENT("F51 function key")},
-   {"Fg", 257		UNTIC_COMMENT("F52 function key")},
-   {"Fh", 258		UNTIC_COMMENT("F53 function key")},
-   {"Fi", 259		UNTIC_COMMENT("F54 function key")},
-   {"Fj", 260		UNTIC_COMMENT("F55 function key")},
-   {"Fk", 261		UNTIC_COMMENT("F56 function key")},
-   {"Fl", 262		UNTIC_COMMENT("F57 function key")},
-   {"Fm", 263		UNTIC_COMMENT("F58 function key")},
-   {"Fn", 264		UNTIC_COMMENT("F59 function key")},
-   {"Fo", 265		UNTIC_COMMENT("F60 function key")},
-   {"Fp", 266		UNTIC_COMMENT("F61 function key")},
-   {"Fq", 267		UNTIC_COMMENT("F62 function key")},
-   {"Fr", 268		UNTIC_COMMENT("F63 function key")},
-   {"G1", 400		UNTIC_COMMENT("single upper right")},
-   {"G2", 398		UNTIC_COMMENT("single upper left")},
-   {"G3", 399		UNTIC_COMMENT("single lower left")},
-   {"G4", 401		UNTIC_COMMENT("single lower right")},
-   {"GC", 408		UNTIC_COMMENT("single intersection")},
-   {"GD", 405		UNTIC_COMMENT("tee pointing down")},
-   {"GH", 406		UNTIC_COMMENT("single horizontal line")},
-   {"GL", 403		UNTIC_COMMENT("tee pointing left")},
-   {"GR", 402		UNTIC_COMMENT("tee pointing right")},
-   {"GU", 404		UNTIC_COMMENT("tee pointing up")},
-   {"GV", 407		UNTIC_COMMENT("single vertical line")},
-   {"Gm", 358		UNTIC_COMMENT("Curses should get button events")},
-   {"HU", 279		UNTIC_COMMENT("hang-up phone")},
-   {"IC", 108		UNTIC_COMMENT("insert #1 chars")},
-   {"Ic", 299		UNTIC_COMMENT("initialize color #1 to (#2,#3,#4)")},
-   {"Ip", 300		UNTIC_COMMENT("Initialize color pair #1 to fg=(#2,#3,#4), bg=(#5,#6,#7)")},
-   {"K1", 139		UNTIC_COMMENT("upper left of keypad")},
-   {"K2", 141		UNTIC_COMMENT("center of keypad")},
-   {"K3", 140		UNTIC_COMMENT("upper right of keypad")},
-   {"K4", 142		UNTIC_COMMENT("lower left of keypad")},
-   {"K5", 143		UNTIC_COMMENT("lower right of keypad")},
-   {"Km", 355		UNTIC_COMMENT("Mouse event has occurred")},
-   {"LE", 111		UNTIC_COMMENT("move #1 chars to the left")},
-   {"LF", 157		UNTIC_COMMENT("turn off soft labels")},
-   {"LO", 156		UNTIC_COMMENT("turn on soft labels")},
-   {"Lf", 273		UNTIC_COMMENT("label format")},
-   {"MC", 270		UNTIC_COMMENT("clear right and left soft margins")},
-   {"ML", 271		UNTIC_COMMENT("set left soft margin")},
-   {"ML", 368		UNTIC_COMMENT("Set both left and right margins to #1, #2")},
-   {"MR", 272		UNTIC_COMMENT("set right soft margin")},
-   {"MT", 369		UNTIC_COMMENT("Sets both top and bottom margins to #1, #2")},
-   {"Mi", 356		UNTIC_COMMENT("Mouse status information")},
-   {"PA", 285		UNTIC_COMMENT("pause for 2-3 seconds")},
-   {"PU", 283		UNTIC_COMMENT("select pulse dialling")},
-   {"QD", 281		UNTIC_COMMENT("dial number #1 without checking")},
-   {"RA", 152		UNTIC_COMMENT("turn off automatic margins")},
-   {"RC", 276		UNTIC_COMMENT("remove clock")},
-   {"RF", 215		UNTIC_COMMENT("send next input char (for ptys)")},
-   {"RI", 112 		UNTIC_COMMENT("parm_right_cursor")},
-   {"RQ", 357		UNTIC_COMMENT("Request mouse position")},
-   {"RX", 150		UNTIC_COMMENT("turn off xon/xoff handshaking")},
-   {"S1", 378		UNTIC_COMMENT("Display PC character")},
-   {"S2", 379		UNTIC_COMMENT("Enter PC character display mode")},
-   {"S3", 380		UNTIC_COMMENT("Exit PC character display mode")},
-   {"S4", 381		UNTIC_COMMENT("Enter PC scancode mode")},
-   {"S5", 382		UNTIC_COMMENT("Exit PC scancode mode")},
-   {"S6", 383		UNTIC_COMMENT("PC terminal options")},
-   {"S7", 384		UNTIC_COMMENT("Escape for scancode emulation")},
-   {"S8", 385		UNTIC_COMMENT("Alternate escape for scancode emulation")},
-   {"SA", 151		UNTIC_COMMENT("turn on automatic margins")},
-   {"SC", 274		UNTIC_COMMENT("set clock, #1 hrs #2 mins #3 secs")},
-   {"SF", 109		UNTIC_COMMENT("scroll forward #1 lines")},
-   {"SR", 113		UNTIC_COMMENT("scroll back #1 lines")},
-   {"SX", 149		UNTIC_COMMENT("turn on xon/xoff handshaking")},
-   {"Sb", 303 		UNTIC_COMMENT("set background (color)")},
-   {"Sf", 302 		UNTIC_COMMENT("set foreground (color)")},
-   {"TO", 282		UNTIC_COMMENT("select touch tone dialing")},
-   {"UP", 114		UNTIC_COMMENT("up #1 lines")},
-   {"WA", 286		UNTIC_COMMENT("wait for dial-tone")},
-   {"WG", 278		UNTIC_COMMENT("go to window #1")},
-   {"XF", 154		UNTIC_COMMENT("XOFF character")},
-   {"XN", 153		UNTIC_COMMENT("XON character")},
-   {"Xh", 386		UNTIC_COMMENT("Enter horizontal highlight mode")},
-   {"Xl", 387		UNTIC_COMMENT("Enter left highlight mode")},
-   {"Xo", 388		UNTIC_COMMENT("Enter low highlight mode")},
-   {"Xr", 389		UNTIC_COMMENT("Enter right highlight mode")},
-   {"Xt", 390		UNTIC_COMMENT("Enter top highlight mode")},
-   {"Xv", 391		UNTIC_COMMENT("Enter vertical highlight mode")},
-   {"Xy", 370		UNTIC_COMMENT("Repeat bit image cell #1 #2 times")},
-   {"YZ", 377		UNTIC_COMMENT("Set page length to #1 lines")},
-   {"Yv", 372		UNTIC_COMMENT("Move to beginning of same row")},
-   {"Yw", 373		UNTIC_COMMENT("Give name for color #1")},
-   {"Yx", 374		UNTIC_COMMENT("Define rectangualar bit image region")},
-   {"Yy", 375		UNTIC_COMMENT("End a bit-image region")},
-   {"Yz", 376		UNTIC_COMMENT("Change to ribbon color #1")},
-   {"ZA", 304		UNTIC_COMMENT("Change number of characters per inch")},
-   {"ZB", 305		UNTIC_COMMENT("Change number of lines per inch")},
-   {"ZC", 306		UNTIC_COMMENT("Change horizontal resolution")},
-   {"ZD", 307		UNTIC_COMMENT("Change vertical resolution")},
-   {"ZE", 308		UNTIC_COMMENT("Define a character")},
-   {"ZF", 309		UNTIC_COMMENT("Enter double-wide mode")},
-   {"ZG", 310		UNTIC_COMMENT("Enter draft-quality mode")},
-   {"ZH", 311		UNTIC_COMMENT("Enter italic mode")},
-   {"ZI", 312		UNTIC_COMMENT("Start leftward carriage motion")},
-   {"ZJ", 313		UNTIC_COMMENT("Start micro-motion mode")},
-   {"ZK", 314		UNTIC_COMMENT("Enter NLQ mode")},
-   {"ZL", 315		UNTIC_COMMENT("Wnter normal-quality mode")},
-   {"ZM", 316		UNTIC_COMMENT("Enter shadow-print mode")},
-   {"ZN", 317		UNTIC_COMMENT("Enter subscript mode")},
-   {"ZO", 318		UNTIC_COMMENT("Enter superscript mode")},
-   {"ZP", 319		UNTIC_COMMENT("Start upward carriage motion")},
-   {"ZQ", 320		UNTIC_COMMENT("End double-wide mode")},
-   {"ZR", 321		UNTIC_COMMENT("End italic mode")},
-   {"ZS", 322		UNTIC_COMMENT("End left-motion mode")},
-   {"ZT", 323		UNTIC_COMMENT("End micro-motion mode")},
-   {"ZU", 324		UNTIC_COMMENT("End shadow-print mode")},
-   {"ZV", 325		UNTIC_COMMENT("End subscript mode")},
-   {"ZW", 326		UNTIC_COMMENT("End superscript mode")},
-   {"ZX", 327		UNTIC_COMMENT("End reverse character motion")},
-   {"ZY", 328		UNTIC_COMMENT("Like column_address in micro mode")},
-   {"ZZ", 329		UNTIC_COMMENT("Like cursor_down in micro mode")},
-   {"Za", 330		UNTIC_COMMENT("Like cursor_left in micro mode")},
-   {"Zb", 331		UNTIC_COMMENT("Like cursor_right in micro mode")},
-   {"Zc", 332		UNTIC_COMMENT("Like row_address in micro mode")},
-   {"Zd", 333		UNTIC_COMMENT("Like cursor_up in micro mode")},
-   {"Ze", 334		UNTIC_COMMENT("Match software bits to print-head pins")},
-   {"Zf", 335		UNTIC_COMMENT("Like parm_down_cursor in micro mode")},
-   {"Zg", 336		UNTIC_COMMENT("Like parm_left_cursor in micro mode")},
-   {"Zh", 337		UNTIC_COMMENT("Like parm_right_cursor in micro mode")},
-   {"Zi", 338		UNTIC_COMMENT("Like parm_up_cursor in micro mode")},
-   {"Zj", 339		UNTIC_COMMENT("Select character set")},
-   {"Zk", 340		UNTIC_COMMENT("Set bottom margin at current line")},
-   {"Zl", 341		UNTIC_COMMENT("Set bottom margin at line #1 or #2 lines from bottom")},
-   {"Zm", 342		UNTIC_COMMENT("Set left (right) margin at column #1 (#2)")},
-   {"Zn", 343		UNTIC_COMMENT("Set right margin at column #1")},
-   {"Zo", 344		UNTIC_COMMENT("Set top margin at current line")},
-   {"Zp", 345		UNTIC_COMMENT("Set top (bottom) margin at row #1 (#2)")},
-   {"Zq", 346		UNTIC_COMMENT("Start printing bit image braphics")},
-   {"Zr", 347		UNTIC_COMMENT("Start character set definition")},
-   {"Zs", 348		UNTIC_COMMENT("Stop printing bit image graphics")},
-   {"Zt", 349		UNTIC_COMMENT("End definition of character aet")},
-   {"Zu", 350		UNTIC_COMMENT("List of subscriptable characters")},
-   {"Zv", 351		UNTIC_COMMENT("List of superscriptable characters")},
-   {"Zw", 352		UNTIC_COMMENT("Printing any of these chars causes CR")},
-   {"Zx", 353		UNTIC_COMMENT("No motion for subsequent character")},
-   {"Zy", 354		UNTIC_COMMENT("List of character set names")},
-   {"Zz", 371		UNTIC_COMMENT("Move to next row of the bit image")},
-   {"ac", 146 		UNTIC_COMMENT("acs_chars")},
-   {"ae", 38 		UNTIC_COMMENT("exit_alt_charset_mode")},
-   {"al", 53		UNTIC_COMMENT("insert line")},
-   {"as", 25 		UNTIC_COMMENT("enter_alt_charset_mode")},
-   {"bc", 395		UNTIC_COMMENT("move left, if not ^H")},
-   {"bl", 1		UNTIC_COMMENT("audible signal (bell)")},
-   {"bt", 0		UNTIC_COMMENT("back tab")},
-   {"bx", 411		UNTIC_COMMENT("box chars primary set")},
-   {"cb", 269		UNTIC_COMMENT("Clear to beginning of line")},
-   {"cd", 7		UNTIC_COMMENT("clear to end of screen")},
-   {"ce", 6 		UNTIC_COMMENT("clr_eol")},
-   {"ch", 8		UNTIC_COMMENT("horizontal position #1, absolute")},
-   {"ci", 363		UNTIC_COMMENT("Init sequence for multiple codesets")},
-   {"cl", 5		UNTIC_COMMENT("clear screen and home cursor")},
-   {"cm", 10		UNTIC_COMMENT("move to row #1 columns #2")},
-   {"cr", 2		UNTIC_COMMENT("carriage return")},
-   {"cs", 3		UNTIC_COMMENT("change region to line #1 to line #2")},
-   {"ct", 4		UNTIC_COMMENT("clear all tab stops")},
-   {"cv", 127		UNTIC_COMMENT("vertical position #1 absolute")},
-   {"dc", 21		UNTIC_COMMENT("delete character")},
-   {"dl", 22		UNTIC_COMMENT("delete line")},
-   {"dm", 29		UNTIC_COMMENT("enter delete mode")},
-   {"do", 11		UNTIC_COMMENT("down one line")},
-   {"ds", 23		UNTIC_COMMENT("disable status line")},
-   {"dv", 362		UNTIC_COMMENT("Indicate language/codeset support")},
-   {"eA", 155		UNTIC_COMMENT("enable alternate char set")},
-   {"ec", 37		UNTIC_COMMENT("erase #1 characters")},
-   {"ed", 41		UNTIC_COMMENT("end delete mode")},
-   {"ei", 42		UNTIC_COMMENT("exit insert mode")},
-   {"ff", 46		UNTIC_COMMENT("hardcopy terminal page eject")},
-   {"fh", 284		UNTIC_COMMENT("flash switch hook")},
-   {"fs", 47		UNTIC_COMMENT("return from status line")},
-   {"hd", 24		UNTIC_COMMENT("half a line down")},
-   {"ho", 12		UNTIC_COMMENT("home cursor (if no cup)")},
-   {"hu", 137		UNTIC_COMMENT("half a line up")},
-   {"i1", 48		UNTIC_COMMENT("initialization string")},
-   {"i2", 392		UNTIC_COMMENT("secondary initialization string")},
-   {"i3", 50		UNTIC_COMMENT("initialization string")},
-   {"iP", 138		UNTIC_COMMENT("path name of program for initialization")},
-   {"ic", 52		UNTIC_COMMENT("insert character")},
-   {"if", 51		UNTIC_COMMENT("name of initialization file")},
-   {"im", 31		UNTIC_COMMENT("enter insert mode")},
-   {"ip", 54		UNTIC_COMMENT("insert padding after inserted character")},
-   {"is", 49		UNTIC_COMMENT("initialization string")},
-   {"k0", 65		UNTIC_COMMENT("F0 function key")},
-   {"k1", 66		UNTIC_COMMENT("F1 function key")},
-   {"k2", 68		UNTIC_COMMENT("F2 function key")},
-   {"k3", 69		UNTIC_COMMENT("F3 function key")},
-   {"k4", 70		UNTIC_COMMENT("F4 function key")},
-   {"k5", 71		UNTIC_COMMENT("F5 function key")},
-   {"k6", 72		UNTIC_COMMENT("F6 function key")},
-   {"k7", 73		UNTIC_COMMENT("F7 function key")},
-   {"k8", 74		UNTIC_COMMENT("F8 fucntion key")},
-   {"k9", 75		UNTIC_COMMENT("F9 function key")},
-   {"k;", 67		UNTIC_COMMENT("F10 function key")},
-   {"kA", 78		UNTIC_COMMENT("insert-line key")},
-   {"kB", 148		UNTIC_COMMENT("back-tab key")},
-   {"kC", 57		UNTIC_COMMENT("clear-screen or erase key")},
-   {"kD", 59		UNTIC_COMMENT("delete-character key")},
-   {"kE", 63		UNTIC_COMMENT("clear-to-end-of-line key")},
-   {"kF", 84		UNTIC_COMMENT("scroll-forward key")},
-   {"kH", 80		UNTIC_COMMENT("last-line key")},
-   {"kI", 77		UNTIC_COMMENT("insert-character key")},
-   {"kL", 60		UNTIC_COMMENT("delete-line key")},
-   {"kM", 62		UNTIC_COMMENT("sent by rmir or smir in insert mode")},
-   {"kN", 81		UNTIC_COMMENT("next-page key")},
-   {"kP", 82		UNTIC_COMMENT("prev-page key")},
-   {"kR", 85		UNTIC_COMMENT("scroll-backward key")},
-   {"kS", 64		UNTIC_COMMENT("clear-to-end-of-screen key")},
-   {"kT", 86		UNTIC_COMMENT("set-tab key")},
-   {"ka", 56		UNTIC_COMMENT("clear-all-tabs key")},
-   {"kb", 55		UNTIC_COMMENT("backspace key")},
-   {"kd", 61		UNTIC_COMMENT("down-arrow key")},
-   {"ke", 88		UNTIC_COMMENT("leave 'keyboard_transmit' mode")},
-   {"kh", 76		UNTIC_COMMENT("home key")},
-   {"kl", 79		UNTIC_COMMENT("left-arrow key")},
-   {"ko", 396		UNTIC_COMMENT("list of self-mapped keycaps")},
-   {"kr", 83		UNTIC_COMMENT("right-arrow key")},
-   {"ks", 89		UNTIC_COMMENT("enter 'keyboard_transmit' mode")},
-   {"kt", 58		UNTIC_COMMENT("clear-tab key")},
-   {"ku", 87		UNTIC_COMMENT("up-arrow key")},
-   {"l0", 90		UNTIC_COMMENT("label on function key f0 if not f0")},
-   {"l1", 91		UNTIC_COMMENT("label on function key f1 if not f1")},
-   {"l2", 93		UNTIC_COMMENT("label on function key f2 if not f2")},
-   {"l3", 94		UNTIC_COMMENT("label on function key f3 if not f3")},
-   {"l4", 95		UNTIC_COMMENT("label on function key f4 if not f4")},
-   {"l5", 96		UNTIC_COMMENT("lable on function key f5 if not f5")},
-   {"l6", 97		UNTIC_COMMENT("label on function key f6 if not f6")},
-   {"l7", 98		UNTIC_COMMENT("label on function key f7 if not f7")},
-   {"l8", 99		UNTIC_COMMENT("label on function key f8 if not f8")},
-   {"l9", 100		UNTIC_COMMENT("label on function key f9 if not f9")},
-   {"la", 92		UNTIC_COMMENT("label on function key f10 if not f10")},
-   {"le", 14		UNTIC_COMMENT("move left one space")},
-   {"ll", 18		UNTIC_COMMENT("last line, first column (if no cup)")},
-   {"ma", 397		UNTIC_COMMENT("map arrow keys rogue(1) motion keys")},
-   {"mb", 26		UNTIC_COMMENT("turn on blinking")},
-   {"md", 27		UNTIC_COMMENT("turn on bold (extra bright) mode")},
-   {"me", 39		UNTIC_COMMENT("turn off all attributes")},
-   {"mh", 30		UNTIC_COMMENT("turn on half-bright mode")},
-   {"mk", 32		UNTIC_COMMENT("turn on blank mode (characters invisible)")},
-   {"ml", 409		UNTIC_COMMENT("memory lock above")},
-   {"mm", 102		UNTIC_COMMENT("turn on meta mode (8th-bit on)")},
-   {"mo", 101		UNTIC_COMMENT("turn off meta mode")},
-   {"mp", 33		UNTIC_COMMENT("turn on protected mode")},
-   {"mr", 34		UNTIC_COMMENT("turn on reverse video mode")},
-   {"mu", 410		UNTIC_COMMENT("memory unlock")},
-   {"nd", 17		UNTIC_COMMENT("move right one space")},
-   {"nl", 394		UNTIC_COMMENT("use to move down")},
-   {"nw", 103		UNTIC_COMMENT("newline (behave like cr followed by lf)")},
-   {"oc", 298		UNTIC_COMMENT("Set all color pairs to the original ones")},
-   {"op", 297		UNTIC_COMMENT("Set default pair to its original value")},
-   {"pO", 144		UNTIC_COMMENT("turn on printer for #1 bytes")},
-   {"pc", 104		UNTIC_COMMENT("padding char (instead of null)")},
-   {"pf", 119		UNTIC_COMMENT("turn off printer")},
-   {"pk", 115		UNTIC_COMMENT("program function key #1 to type string #2")},
-   {"pl", 116		UNTIC_COMMENT("program function key #1 to execute string #2")},
-   {"pn", 147		UNTIC_COMMENT("program label #1 to show string #2")},
-   {"po", 120		UNTIC_COMMENT("turn on printer")},
-   {"ps", 118		UNTIC_COMMENT("print contents of screen")},
-   {"px", 117		UNTIC_COMMENT("program function key #1 to transmit string #2")},
-   {"r1", 122		UNTIC_COMMENT("reset string")},
-   {"r2", 123		UNTIC_COMMENT("reset string")},
-   {"r3", 124		UNTIC_COMMENT("reset string")},
-   {"rP", 145		UNTIC_COMMENT("like ip but when in insert mode")},
-   {"rc", 126		UNTIC_COMMENT("restore cursor to last position of sc")},
-   {"rf", 125		UNTIC_COMMENT("name of reset file")},
-   {"rp", 121		UNTIC_COMMENT("repeat char #1 #2 times")},
-   {"rs", 393		UNTIC_COMMENT("terminal reset string")},
-   {"s0", 364		UNTIC_COMMENT("Shift to code set 0 (EUC set 0, ASCII)")},
-   {"s1", 365		UNTIC_COMMENT("Shift to code set 1")},
-   {"s2", 366		UNTIC_COMMENT("Shift to code set 2")},
-   {"s3", 367		UNTIC_COMMENT("Shift to code set 3")},
-   {"sa", 131		UNTIC_COMMENT("define video attributes #1-#9 (PG9)")},
-   {"sc", 128		UNTIC_COMMENT("save current cursor position")},
-   {"se", 43		UNTIC_COMMENT("exit standout mode")},
-   {"sf", 129		UNTIC_COMMENT("scroll text up")},
-   {"so", 35		UNTIC_COMMENT("begin standout mode")},
-   {"sp", 301		UNTIC_COMMENT("Set current color pair to #1")},
-   {"sr", 130		UNTIC_COMMENT("scroll text down")},
-   {"st", 132		UNTIC_COMMENT("set a tab in every row, current columns")},
-   {"ta", 134		UNTIC_COMMENT("tab to next 8-space hardware tab stop")},
-   {"te", 40		UNTIC_COMMENT("strings to end programs using cup")},
-   {"ti", 28		UNTIC_COMMENT("string to start programs using cup")},
-   {"ts", 135		UNTIC_COMMENT("move to status line")},
-   {"u0", 287		UNTIC_COMMENT("User string #0")},
-   {"u1", 288		UNTIC_COMMENT("User string #1")},
-   {"u2", 289		UNTIC_COMMENT("User string #2")},
-   {"u3", 290		UNTIC_COMMENT("User string #3")},
-   {"u4", 291		UNTIC_COMMENT("User string #4")},
-   {"u5", 292		UNTIC_COMMENT("User string #5")},
-   {"u6", 293		UNTIC_COMMENT("User string #6")},
-   {"u7", 294		UNTIC_COMMENT("User string #7")},
-   {"u8", 295		UNTIC_COMMENT("User string #8")},
-   {"u9", 296		UNTIC_COMMENT("User string #9")},
-   {"uc", 136		UNTIC_COMMENT("underline char and move past it")},
-   {"ue", 44		UNTIC_COMMENT("exit underline mode")},
-   {"up", 19		UNTIC_COMMENT("up one line")},
-   {"us", 36		UNTIC_COMMENT("begin underline mode")},
-   {"vb", 45		UNTIC_COMMENT("visible bell (may not move cursor)")},
-   {"ve", 16		UNTIC_COMMENT("make cursor appear normal (undo civis/cvvis)")},
-   {"vi", 13		UNTIC_COMMENT("make cursor invisible")},
-   {"vs", 20		UNTIC_COMMENT("make cursor very visible")},
-   {"wi", 133		UNTIC_COMMENT("current window is lines #1-#2 cols #3-#4")},
-   {"xl", 361		UNTIC_COMMENT("Program function key #1 to type string #2 and show string #3")},
-   {"", -1		UNTIC_COMMENT(NULL)}
-};
-
-static int compute_cap_offset (char *cap, SLterminfo_Type *t, Tgetstr_Map_Type *map, unsigned int max_ofs)
-{
-   char cha, chb;
-
-   (void) t;
-   cha = *cap++; chb = *cap;
-
-   while (*map->name != 0)
-     {
-	if ((cha == *map->name) && (chb == *(map->name + 1)))
-	  {
-	     if (map->offset >= (int) max_ofs) return -1;
-	     return map->offset;
-	  }
-	map++;
-     }
-   return -1;
-}
-
-char *_SLtt_tigetstr (SLterminfo_Type *t, char *cap)
-{
-   int offset;
-
-   if (t == NULL)
-     return NULL;
-
-   if (t->flags == SLTERMCAP) return tcap_getstr (cap, t);
-
-   offset = compute_cap_offset (cap, t, Tgetstr_Map, t->num_string_offsets);
-   if (offset < 0) return NULL;
-   offset = make_integer (t->string_offsets + 2 * offset);
-   if (offset < 0) return NULL;
-   return t->string_table + offset;
-}
-
-static Tgetstr_Map_Type Tgetnum_Map[] =
-{
-   {"BT", 30		UNTIC_COMMENT("number of buttons on mouse")},
-   {"Co", 13		UNTIC_COMMENT("maximum numbers of colors on screen")},
-   {"MW", 12		UNTIC_COMMENT("maxumum number of defineable windows")},
-   {"NC", 15		UNTIC_COMMENT("video attributes that can't be used with colors")},
-   {"Nl", 8		UNTIC_COMMENT("number of labels on screen")},
-   {"Ya", 16		UNTIC_COMMENT("numbers of bytes buffered before printing")},
-   {"Yb", 17		UNTIC_COMMENT("spacing of pins vertically in pins per inch")},
-   {"Yc", 18		UNTIC_COMMENT("spacing of dots horizontally in dots per inch")},
-   {"Yd", 19		UNTIC_COMMENT("maximum value in micro_..._address")},
-   {"Ye", 20		UNTIC_COMMENT("maximum value in parm_..._micro")},
-   {"Yf", 21		UNTIC_COMMENT("character size when in micro mode")},
-   {"Yg", 22		UNTIC_COMMENT("line size when in micro mode")},
-   {"Yh", 23		UNTIC_COMMENT("numbers of pins in print-head")},
-   {"Yi", 24		UNTIC_COMMENT("horizontal resolution in units per line")},
-   {"Yj", 25		UNTIC_COMMENT("vertical resolution in units per line")},
-   {"Yk", 26		UNTIC_COMMENT("horizontal resolution in units per inch")},
-   {"Yl", 27		UNTIC_COMMENT("vertical resolution in units per inch")},
-   {"Ym", 28		UNTIC_COMMENT("print rate in chars per second")},
-   {"Yn", 29		UNTIC_COMMENT("character step size when in double wide mode")},
-   {"Yo", 31		UNTIC_COMMENT("number of passed for each bit-image row")},
-   {"Yp", 32		UNTIC_COMMENT("type of bit-image device")},
-   {"co", 0		UNTIC_COMMENT("number of columns in aline")},
-   {"dB", 36		UNTIC_COMMENT("padding required for ^H")},
-   {"dC", 34		UNTIC_COMMENT("pad needed for CR")},
-   {"dN", 35		UNTIC_COMMENT("pad needed for LF")},
-   {"dT", 37		UNTIC_COMMENT("padding required for ^I")},
-   {"it", 1		UNTIC_COMMENT("tabs initially every # spaces")},
-   {"kn", 38		UNTIC_COMMENT("count of function keys")},
-   {"lh", 9		UNTIC_COMMENT("rows in each label")},
-   {"li", 2		UNTIC_COMMENT("number of lines on screen or page")},
-   {"lm", 3		UNTIC_COMMENT("lines of memory if > line. 0 => varies")},
-   {"lw", 10		UNTIC_COMMENT("columns in each label")},
-   {"ma", 11		UNTIC_COMMENT("maximum combined attributes terminal can handle")},
-   {"pa", 14		UNTIC_COMMENT("maximum number of color-pairs on the screen")},
-   {"pb", 5		UNTIC_COMMENT("lowest baud rate where padding needed")},
-   {"sg", 4		UNTIC_COMMENT("number of blank chars left by smso or rmso")},
-   {"ug", 33		UNTIC_COMMENT("number of blanks left by ul")},
-   {"vt", 6		UNTIC_COMMENT("virtual terminal number (CB/unix)")},
-   {"ws", 7		UNTIC_COMMENT("columns in status line")},
-   {"", -1		UNTIC_COMMENT(NULL)}
-};
-
-int _SLtt_tigetnum (SLterminfo_Type *t, char *cap)
-{
-   int offset;
-
-   if (t == NULL)
-     return -1;
-
-   if (t->flags == SLTERMCAP) return tcap_getnum (cap, t);
-
-   offset = compute_cap_offset (cap, t, Tgetnum_Map, t->num_numbers);
-   if (offset < 0) return -1;
-   return make_integer (t->numbers + 2 * offset);
-}
-
-static Tgetstr_Map_Type Tgetflag_Map[] =
-{
-   {"5i", 22		UNTIC_COMMENT("printer won't echo on screen")},
-   {"HC", 23		UNTIC_COMMENT("cursor is hard to see")},
-   {"MT", 40		UNTIC_COMMENT("has meta key")},
-   {"ND", 26		UNTIC_COMMENT("scrolling region is non-destructive")},
-   {"NL", 41		UNTIC_COMMENT("move down with \n")},
-   {"NP", 25		UNTIC_COMMENT("pad character does not exist")},
-   {"NR", 24		UNTIC_COMMENT("smcup does not reverse rmcup")},
-   {"YA", 30		UNTIC_COMMENT("only positive motion for hpa/mhpa caps")},
-   {"YB", 31		UNTIC_COMMENT("using cr turns off micro mode")},
-   {"YC", 32		UNTIC_COMMENT("printer needs operator to change character set")},
-   {"YD", 33		UNTIC_COMMENT("only positive motion for vpa/mvpa caps")},
-   {"YE", 34		UNTIC_COMMENT("printing in last column causes cr")},
-   {"YF", 35		UNTIC_COMMENT("changing character pitch changes resolution")},
-   {"YG", 36		UNTIC_COMMENT("changing line pitch changes resolution")},
-   {"am", 1		UNTIC_COMMENT("terminal has automatic margins")},
-   {"bs", 37		UNTIC_COMMENT("uses ^H to move left")},
-   {"bw", 0		UNTIC_COMMENT("cub1 wraps from column 0 to last column")},
-   {"cc", 27		UNTIC_COMMENT("terminal can re-define existing colors")},
-   {"da", 11		UNTIC_COMMENT("display may be retained above the screen")},
-   {"db", 12		UNTIC_COMMENT("display may be retained below the screen")},
-   {"eo", 5		UNTIC_COMMENT("can erase overstrikes with a blank")},
-   {"es", 16		UNTIC_COMMENT("escape can be used on the status line")},
-   {"gn", 6		UNTIC_COMMENT("generic line type")},
-   {"hc", 7		UNTIC_COMMENT("hardcopy terminal")},
-   {"hl", 29		UNTIC_COMMENT("terminal uses only HLS color notation (tektronix)")},
-   {"hs", 9		UNTIC_COMMENT("has extra status line")},
-   {"hz", 18		UNTIC_COMMENT("can't print ~'s (hazeltine)")},
-   {"in", 10		UNTIC_COMMENT("insert mode distinguishes nulls")},
-   {"km", 8		UNTIC_COMMENT("Has a meta key, sets msb high")},
-   {"mi", 13		UNTIC_COMMENT("safe to move while in insert mode")},
-   {"ms", 14		UNTIC_COMMENT("safe to move while in standout mode")},
-   {"nc", 39		UNTIC_COMMENT("no way to go to start of line")},
-   {"ns", 38		UNTIC_COMMENT("crt cannot scroll")},
-   {"nx", 21		UNTIC_COMMENT("padding won't work, xon/xoff required")},
-   {"os", 15		UNTIC_COMMENT("terminal can overstrike")},
-   {"pt", 42		UNTIC_COMMENT("has 8-char tabs invoked with ^I")},
-   {"ul", 19		UNTIC_COMMENT("underline character overstrikes")},
-   {"ut", 28		UNTIC_COMMENT("screen erased with background color")},
-   {"xb", 2		UNTIC_COMMENT("beehive (f1=escape, f2=ctrl C)")},
-   {"xn", 4		UNTIC_COMMENT("newline ignored after 80 cols (concept)")},
-   {"xo", 20		UNTIC_COMMENT("terminal uses xon/xoff handshaking")},
-   {"xr", 43		UNTIC_COMMENT("return clears the line")},
-   {"xs", 3		UNTIC_COMMENT("standout not erased by overwriting (hp)")},
-   {"xt", 17		UNTIC_COMMENT("tabs destructive, magic so char (t1061)")},
-   {"", -1		UNTIC_COMMENT(NULL)}
-};
-
-int _SLtt_tigetflag (SLterminfo_Type *t, char *cap)
-{
-   int offset;
-
-   if (t == NULL) return -1;
-
-   if (t->flags == SLTERMCAP) return tcap_getflag (cap, t);
-
-   offset = compute_cap_offset (cap, t, Tgetflag_Map, t->boolean_section_size);
-
-   if (offset < 0) return -1;
-   return (int) *(t->boolean_flags + offset);
-}
-
-/* These are my termcap routines.  They only work with the TERMCAP environment
- * variable.  This variable must contain the termcap entry and NOT the file.
- */
-
-static int tcap_getflag (char *cap, SLterminfo_Type *t)
-{
-   char a, b;
-   char *f = (char *) t->boolean_flags;
-   char *fmax;
-
-   if (f == NULL) return 0;
-   fmax = f + t->boolean_section_size;
-
-   a = *cap;
-   b = *(cap + 1);
-   while (f < fmax)
-     {
-	if ((a == f[0]) && (b == f[1]))
-	  return 1;
-	f += 2;
-     }
-   return 0;
-}
-
-static char *tcap_get_cap (unsigned char *cap, unsigned char *caps, unsigned int len)
-{
-   unsigned char c0, c1;
-   unsigned char *caps_max;
-
-   c0 = cap[0];
-   c1 = cap[1];
-
-   if (caps == NULL) return NULL;
-   caps_max = caps + len;
-   while (caps < caps_max)
-     {
-	if ((c0 == caps[0]) && (c1 == caps[1]))
-	  {
-	     return (char *) caps + 3;
-	  }
-	caps += (int) caps[2];
-     }
-   return NULL;
-}
-
-static int tcap_getnum (char *cap, SLterminfo_Type *t)
-{
-   cap = tcap_get_cap ((unsigned char *) cap, t->numbers, t->num_numbers);
-   if (cap == NULL) return -1;
-   return atoi (cap);
-}
-
-static char *tcap_getstr (char *cap, SLterminfo_Type *t)
-{
-   return tcap_get_cap ((unsigned char *) cap, (unsigned char *) t->string_table, t->string_table_size);
-}
-
-static int tcap_extract_field (unsigned char *t0)
-{
-   register unsigned char ch, *t = t0;
-   while (((ch = *t) != 0) && (ch != ':')) t++;
-   if (ch == ':') return (int) (t - t0);
-   return -1;
-}
-
-int SLtt_Try_Termcap = 1;
-static int tcap_getent (char *term, SLterminfo_Type *ti)
-{
-   unsigned char *termcap, ch;
-   unsigned char *buf, *b;
-   unsigned char *t;
-   int len;
-
-   if (SLtt_Try_Termcap == 0) return -1;
-#if 1
-   /* XFREE86 xterm sets the TERMCAP environment variable to an invalid
-    * value.  Specifically, it lacks the tc= string.
-    */
-   if (!strncmp (term, "xterm", 5))
-     return -1;
-#endif
-   termcap = (unsigned char *) getenv ("TERMCAP");
-   if ((termcap == NULL) || (*termcap == '/')) return -1;
-
-   /* We have a termcap so lets use it provided it does not have a reference
-    * to another terminal via tc=.  In that case, use terminfo.  The alternative
-    * would be to parse the termcap file which I do not want to do right now.
-    * Besides, this is a terminfo based system and if the termcap were parsed
-    * terminfo would almost never get a chance to run.  In addition, the tc=
-    * thing should not occur if tset is used to set the termcap entry.
-    */
-   t = termcap;
-   while ((len = tcap_extract_field (t)) != -1)
-     {
-	if ((len > 3) && (t[0] == 't') && (t[1] == 'c') && (t[2] == '='))
-	  return -1;
-	t += (len + 1);
-     }
-
-   /* malloc some extra space just in case it is needed. */
-   len = strlen ((char *) termcap) + 256;
-   if (NULL == (buf = (unsigned char *) SLmalloc ((unsigned int) len))) return -1;
-
-   b = buf;
-
-   /* The beginning of the termcap entry contains the names of the entry.
-    * It is terminated by a colon.
-    */
-
-   ti->terminal_names = (char *) b;
-   t = termcap;
-   len = tcap_extract_field (t);
-   if (len < 0)
-     {
-	SLfree ((char *)buf);
-	return -1;
-     }
-   strncpy ((char *) b, (char *) t, (unsigned int) len);
-   b[len] = 0;
-   b += len + 1;
-   ti->name_section_size = len;
-
-   /* Now, we are really at the start of the termcap entries.  Point the
-    * termcap variable here since we want to refer to this a number of times.
-    */
-   termcap = t + (len + 1);
-
-   /* Process strings first. */
-   ti->string_table = (char *) b;
-   t = termcap;
-   while (-1 != (len = tcap_extract_field (t)))
-     {
-	unsigned char *b1;
-	unsigned char *tmax;
-
-	/* We are looking for: XX=something */
-	if ((len < 4) || (t[2] != '=') || (*t == '.'))
-	  {
-	     t += len + 1;
-	     continue;
-	  }
-	tmax = t + len;
-	b1 = b;
-
-	while (t < tmax)
-	  {
-	     ch = *t++;
-	     if ((ch == '\\') && (t < tmax))
-	       {
-		  t = (unsigned char *) _SLexpand_escaped_char ((char *) t, (char *) &ch);
-	       }
-	     else if ((ch == '^') && (t < tmax))
-	       {
-		  ch = *t++;
-		  if (ch == '?') ch = 127;
-		  else ch = (ch | 0x20) - ('a' - 1);
-	       }
-	     *b++ = ch;
-	  }
-	/* Null terminate it. */
-	*b++ = 0;
-	len = (int) (b - b1);
-	b1[2] = (unsigned char) len;    /* replace the = by the length */
-	/* skip colon to next field. */
-	t++;
-     }
-   ti->string_table_size = (int) (b - (unsigned char *) ti->string_table);
-
-   /* Now process the numbers. */
-
-   t = termcap;
-   ti->numbers = b;
-   while (-1 != (len = tcap_extract_field (t)))
-     {
-	unsigned char *b1;
-	unsigned char *tmax;
-
-	/* We are looking for: XX#NUMBER */
-	if ((len < 4) || (t[2] != '#') || (*t == '.'))
-	  {
-	     t += len + 1;
-	     continue;
-	  }
-	tmax = t + len;
-	b1 = b;
-
-	while (t < tmax)
-	  {
-	     *b++ = *t++;
-	  }
-	/* Null terminate it. */
-	*b++ = 0;
-	len = (int) (b - b1);
-	b1[2] = (unsigned char) len;    /* replace the # by the length */
-	t++;
-     }
-   ti->num_numbers = (int) (b - ti->numbers);
-
-   /* Now process the flags. */
-   t = termcap;
-   ti->boolean_flags = b;
-   while (-1 != (len = tcap_extract_field (t)))
-     {
-	/* We are looking for: XX#NUMBER */
-	if ((len != 2) || (*t == '.') || (*t <= ' '))
-	  {
-	     t += len + 1;
-	     continue;
-	  }
-	b[0] = t[0];
-	b[1] = t[1];
-	t += 3;
-	b += 2;
-     }
-   ti->boolean_section_size = (int) (b - ti->boolean_flags);
-   ti->flags = SLTERMCAP;
-   return 0;
-}
-
-
-/* These routines are provided only for backward binary compatability.
- * They will vanish in V2.x
- */
-char *SLtt_tigetent (char *s)
-{
-   return (char *) _SLtt_tigetent (s);
-}
-
-extern char *SLtt_tigetstr (char *s, char **p)
-{
-   if (p == NULL)
-     return NULL;
-   return _SLtt_tigetstr ((SLterminfo_Type *) *p, s);
-}
-
-extern int SLtt_tigetnum (char *s, char **p)
-{
-   if (p == NULL)
-     return -1;
-   return _SLtt_tigetnum ((SLterminfo_Type *) *p, s);
-}
-
-
diff --git a/mdk-stage1/slang/sltime.c b/mdk-stage1/slang/sltime.c
deleted file mode 100644
index 14fc6ec16..000000000
--- a/mdk-stage1/slang/sltime.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/* time related system calls */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include <sys/types.h>
-#include <time.h>
-
-#if defined(__BORLANDC__)
-# include <dos.h>
-#endif
-#if defined(__GO32__) || defined(__WATCOMC__)
-# include <dos.h>
-# include <bios.h>
-#endif
-
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef __WIN32__
-#include <windows.h>
-/* Sleep is defined badly in MSVC... */
-# ifdef _MSC_VER
-#  define sleep(n) _sleep((n)*1000)
-# else
-#  ifdef sleep
-#   undef sleep
-#  endif
-#  define sleep(x) if(x)Sleep((x)*1000)
-# endif
-#endif
-
-
-#if defined(IBMPC_SYSTEM)
-/* For other system (Unix and VMS), _SLusleep is in sldisply.c */
-int _SLusleep (unsigned long s)
-{
-   sleep (s/1000000L);
-   s = s % 1000000L;
-
-# if defined(__WIN32__)
-   Sleep (s/1000);
-#else
-# if defined(__IBMC__)
-   DosSleep(s/1000);
-# else
-#  if defined(_MSC_VER)
-   _sleep (s/1000);
-#  endif
-# endif
-#endif
-   return 0;
-}
-#endif
-
-#if defined(__IBMC__) && !defined(_AIX)
-/* sleep is not a standard function in VA3. */
-unsigned int sleep (unsigned int seconds)
-{
-   DosSleep(1000L * ((long)seconds));
-   return 0;
-}
-#endif
-
-static char *ctime_cmd (unsigned long *tt)
-{
-   char *t;
-
-   t = ctime ((time_t *) tt);
-   t[24] = 0;  /* knock off \n */
-   return (t);
-}
-
-static void sleep_cmd (void)
-{
-   unsigned int secs;
-#if SLANG_HAS_FLOAT
-   unsigned long usecs;
-   double x;
-
-   if (-1 == SLang_pop_double (&x, NULL, NULL))
-     return;
-
-   if (x < 0.0) 
-     x = 0.0;
-   secs = (unsigned int) x;
-   sleep (secs);
-   x -= (double) secs;
-   usecs = (unsigned long) (1e6 * x);
-   if (usecs > 0) _SLusleep (usecs);
-#else
-   if (-1 == SLang_pop_uinteger (&secs))
-     return;
-   if (secs != 0) sleep (secs);
-#endif
-}
-
-static unsigned long _time_cmd (void)
-{
-   return (unsigned long) time (NULL);
-}
-
-#if defined(__GO32__)
-static char *djgpp_current_time (void) /*{{{*/
-{
-   union REGS rg;
-   unsigned int year;
-   unsigned char month, day, weekday, hour, minute, sec;
-   char days[] = "SunMonTueWedThuFriSat";
-   char months[] = "JanFebMarAprMayJunJulAugSepOctNovDec";
-   static char the_date[26];
-
-   rg.h.ah = 0x2A;
-#ifndef __WATCOMC__
-   int86(0x21, &rg, &rg);
-   year = rg.x.cx & 0xFFFF;
-#else
-   int386(0x21, &rg, &rg);
-   year = rg.x.ecx & 0xFFFF;
-#endif
-
-   month = 3 * (rg.h.dh - 1);
-   day = rg.h.dl;
-   weekday = 3 * rg.h.al;
-
-   rg.h.ah = 0x2C;
-
-#ifndef __WATCOMC__
-   int86(0x21, &rg, &rg);
-#else
-   int386(0x21, &rg, &rg);
-#endif
-
-   hour = rg.h.ch;
-   minute = rg.h.cl;
-   sec = rg.h.dh;
-
-   /* we want this form: Thu Apr 14 15:43:39 1994\n  */
-   sprintf(the_date, "%.3s %.3s%3d %02d:%02d:%02d %d\n",
-	   days + weekday, months + month,
-	   day, hour, minute, sec, year);
-   return the_date;
-}
-
-/*}}}*/
-
-#endif
-
-char *SLcurrent_time_string (void) /*{{{*/
-{
-   char *the_time;
-#ifndef __GO32__
-   time_t myclock;
-
-   myclock = time((time_t *) 0);
-   the_time = (char *) ctime(&myclock);
-#else
-   the_time = djgpp_current_time ();
-#endif
-   /* returns the form Sun Sep 16 01:03:52 1985\n\0 */
-   the_time[24] = '\0';
-   return(the_time);
-}
-
-/*}}}*/
-
-static int push_tm_struct (struct tm *tms)
-{
-   char *field_names [9];
-   unsigned char field_types[9];
-   VOID_STAR field_values [9];
-   int int_values [9];
-   unsigned int i;
-
-   if (tms == NULL)
-     return SLang_push_null ();
-
-   field_names [0] = "tm_sec"; int_values [0] = tms->tm_sec;
-   field_names [1] = "tm_min"; int_values [1] = tms->tm_min;
-   field_names [2] = "tm_hour"; int_values [2] = tms->tm_hour;
-   field_names [3] = "tm_mday"; int_values [3] = tms->tm_mday;
-   field_names [4] = "tm_mon"; int_values [4] = tms->tm_mon;
-   field_names [5] = "tm_year"; int_values [5] = tms->tm_year;
-   field_names [6] = "tm_wday"; int_values [6] = tms->tm_wday;
-   field_names [7] = "tm_yday"; int_values [7] = tms->tm_yday;
-   field_names [8] = "tm_isdst"; int_values [8] = tms->tm_isdst;
-
-   for (i = 0; i < 9; i++)
-     {
-	field_types [i] = SLANG_INT_TYPE;
-	field_values [i] = (VOID_STAR) (int_values + i);
-     }
-
-   return SLstruct_create_struct (9, field_names, field_types, field_values);
-}
-
-
-static void localtime_cmd (long *t)
-{
-   time_t tt = (time_t) *t;
-   (void) push_tm_struct (localtime (&tt));
-}
-   
-static void gmtime_cmd (long *t)
-{
-#ifdef HAVE_GMTIME
-   time_t tt = (time_t) *t;
-   (void) push_tm_struct (gmtime (&tt));
-#else
-   localtime_cmd (t);
-#endif
-}
-
-#ifdef HAVE_TIMES
-
-# ifdef HAVE_SYS_TIMES_H
-#  include <sys/times.h>
-# endif
-
-#include <limits.h>
-
-#ifdef CLK_TCK
-# define SECS_PER_TICK (1.0/(double)CLK_TCK)
-#else 
-# ifdef CLOCKS_PER_SEC
-#  define SECS_PER_TICK (1.0/(double)CLOCKS_PER_SEC)
-# else
-#  define SECS_PER_TICK (1.0/60.0)
-# endif
-#endif
-
-static void times_cmd (void)
-{
-   double dvals[4];
-   struct tms t;
-   VOID_STAR field_values[4];
-   char *field_names[4];
-   unsigned int i;
-   unsigned char field_types[4];
-   
-   (void) times (&t);
-
-   field_names[0] = "tms_utime";   dvals[0] = (double)t.tms_utime; 
-   field_names[1] = "tms_stime";   dvals[1] = (double)t.tms_stime; 
-   field_names[2] = "tms_cutime";  dvals[2] = (double)t.tms_cutime;
-   field_names[3] = "tms_cstime";  dvals[3] = (double)t.tms_cstime;
-
-   for (i = 0; i < 4; i++)
-     {
-	dvals[i] *= SECS_PER_TICK;
-	field_values[i] = (VOID_STAR) &dvals[i];
-	field_types[i] = SLANG_DOUBLE_TYPE;
-     }
-   (void) SLstruct_create_struct (4, field_names, field_types, field_values);
-}
-
-static struct tms Tic_TMS;
-
-static void tic_cmd (void)
-{
-   (void) times (&Tic_TMS);
-}
-
-static double toc_cmd (void)
-{
-   struct tms t;
-   double d;
-
-   (void) times (&t);
-   d = ((t.tms_utime - Tic_TMS.tms_utime)
-	+ (t.tms_stime - Tic_TMS.tms_stime)) * SECS_PER_TICK;
-   Tic_TMS = t;
-   return d;
-}
-
-#endif				       /* HAVE_TIMES */
-
-
-static SLang_Intrin_Fun_Type Time_Funs_Table [] =
-{
-   MAKE_INTRINSIC_1("ctime", ctime_cmd, SLANG_STRING_TYPE, SLANG_ULONG_TYPE),
-   MAKE_INTRINSIC_0("sleep", sleep_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("_time", _time_cmd, SLANG_ULONG_TYPE),
-   MAKE_INTRINSIC_0("time", SLcurrent_time_string, SLANG_STRING_TYPE),
-   MAKE_INTRINSIC_1("localtime", localtime_cmd, SLANG_VOID_TYPE, SLANG_LONG_TYPE),
-   MAKE_INTRINSIC_1("gmtime", gmtime_cmd, SLANG_VOID_TYPE, SLANG_LONG_TYPE),
-
-#ifdef HAVE_TIMES
-   MAKE_INTRINSIC_0("times", times_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("tic", tic_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("toc", toc_cmd, SLANG_DOUBLE_TYPE),
-#endif
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-int _SLang_init_sltime (void)
-{
-#ifdef HAVE_TIMES
-   (void) tic_cmd ();
-#endif
-   return SLadd_intrin_fun_table (Time_Funs_Table, NULL);
-}
-
diff --git a/mdk-stage1/slang/sltoken.c b/mdk-stage1/slang/sltoken.c
deleted file mode 100644
index d08967a24..000000000
--- a/mdk-stage1/slang/sltoken.c
+++ /dev/null
@@ -1,1702 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#define MAX_TOKEN_LEN 254
-#define MAX_FILE_LINE_LEN 256
-
-static char Empty_Line[1] = {0};
-
-static int Default_Compile_Line_Num_Info;
-static char *Input_Line = Empty_Line;
-static char *Input_Line_Pointer;
-
-static SLPreprocess_Type *This_SLpp;
-
-static SLang_Load_Type *LLT;
-
-static char *map_token_to_string (_SLang_Token_Type *tok)
-{
-   char *s;
-   static char numbuf [32];
-   unsigned char type;
-   s = NULL;
-
-   if (tok != NULL) type = tok->type;
-   else type = 0;
-
-   switch (type)
-     {
-      case 0:
-	s = "??";
-	break;
-
-      case CHAR_TOKEN:
-      case SHORT_TOKEN:
-      case INT_TOKEN:
-      case LONG_TOKEN:
-	s = numbuf;
-	sprintf (s, "%ld", tok->v.long_val);
-	break;
-
-      case UCHAR_TOKEN:
-      case USHORT_TOKEN:
-      case UINT_TOKEN:
-      case ULONG_TOKEN:
-	s = numbuf;
-	sprintf (s, "%lu", (unsigned long)tok->v.long_val);
-	break;
-
-      case OBRACKET_TOKEN: s = "["; break;
-      case CBRACKET_TOKEN: s = "]"; break;
-      case OPAREN_TOKEN: s = "("; break;
-      case CPAREN_TOKEN: s = ")"; break;
-      case OBRACE_TOKEN: s = "{"; break;
-      case CBRACE_TOKEN: s = "}"; break;
-      case DEREF_TOKEN: s = "@"; break;
-      case POUND_TOKEN: s = "#"; break;
-      case COMMA_TOKEN: s = ","; break;
-      case SEMICOLON_TOKEN: s = ";"; break;
-      case COLON_TOKEN: s = ":"; break;
-
-#if SLANG_HAS_FLOAT
-      case FLOAT_TOKEN:
-      case DOUBLE_TOKEN:
-      case COMPLEX_TOKEN:
-#endif
-      case IDENT_TOKEN:
-	if ((tok->free_sval_flag == 0) || (tok->num_refs == 0))
-	  break;
-	/* drop */
-      default:
-	s = tok->v.s_val;
-	break;
-     }
-
-   if (s == NULL)
-     {
-	s = numbuf;
-	sprintf (s, "(0x%02X)", type);
-     }
-
-   return s;
-}
-
-static char *make_line_file_error (char *buf, unsigned int buflen,
-				   _SLang_Token_Type *tok, char *dsc, int line, char *file)
-{
-#if _SLANG_HAS_DEBUG_CODE
-   if (tok != NULL) line = tok->line_number;
-#endif
-   if (file == NULL) file = "??";
-
-   (void) _SLsnprintf (buf, buflen, "%s: found '%s', line %d, file: %s",
-		       dsc, map_token_to_string (tok), line, file);
-
-   return buf;
-}
-
-void _SLparse_error(char *str, _SLang_Token_Type *tok, int flag)
-{
-   char buf [1024];
-
-   if (str == NULL)
-     str = "Parse Error";
-
-   make_line_file_error (buf, sizeof (buf), tok, str, LLT->line_num, (char *) LLT->name);
-
-   if ((flag == 0) && SLang_Error)
-     return;
-
-   SLang_verror (SL_SYNTAX_ERROR, "%s", buf);
-}
-
-static void do_line_file_error (int line, char *file)
-{
-   SLang_verror (SL_SYNTAX_ERROR,
-		 "called from line %d, file: %s", line, file);
-}
-
-#define ALPHA_CHAR 	1
-#define DIGIT_CHAR	2
-#define EXCL_CHAR 	3
-#define SEP_CHAR	4
-#define OP_CHAR		5
-#define DOT_CHAR	6
-#define BOLDOT_CHAR	7
-#define DQUOTE_CHAR	8
-#define QUOTE_CHAR	9
-#define COMMENT_CHAR	10
-#define NL_CHAR		11
-#define BAD_CHAR	12
-#define WHITE_CHAR	13
-
-#define CHAR_EOF	255
-
-#define CHAR_CLASS(c)	(Char_Type_Table[(c)][0])
-#define CHAR_DATA(c)	(Char_Type_Table[(c)][1])
-
-/* In this table, if a single character can represent an operator, e.g.,
- * '&' (BAND_TOKEN), then it must be placed before multiple-character
- * operators that begin with the same character, e.g., "&=".  See
- * get_op_token to see how this is exploited.
- *
- * The third character null terminates the operator string.  This is for
- * the token structure.
- */
-static char Operators [29][4] =
-{
-#define OFS_EXCL	0
-     {'!',	'=',	0, NE_TOKEN},
-#define OFS_POUND	1
-     {'#',	0,	0, POUND_TOKEN},
-#define OFS_BAND	2
-     {'&',	0,	0, BAND_TOKEN},
-     {'&',	'&',	0, EOF_TOKEN},
-     {'&',	'=',	0, BANDEQS_TOKEN},
-#define OFS_STAR	5
-     {'*',	0,	0, TIMES_TOKEN},
-     {'*',	'=',	0, TIMESEQS_TOKEN},
-#define OFS_PLUS	7
-     {'+',	0,	0, ADD_TOKEN},
-     {'+',	'+',	0, PLUSPLUS_TOKEN},
-     {'+',	'=',	0, PLUSEQS_TOKEN},
-#define OFS_MINUS	10
-     {'-',	0,	0, SUB_TOKEN},
-     {'-',	'-',	0, MINUSMINUS_TOKEN},
-     {'-',	'=',	0, MINUSEQS_TOKEN},
-     {'-',	'>',	0, NAMESPACE_TOKEN},
-#define OFS_DIV		14
-     {'/',	0,	0, DIV_TOKEN},
-     {'/',	'=',	0, DIVEQS_TOKEN},
-#define OFS_LT		16
-     {'<',	0,	0, LT_TOKEN},
-     {'<',	'=',	0, LE_TOKEN},
-#define OFS_EQS		18
-     {'=',	0,	0, ASSIGN_TOKEN},
-     {'=',	'=',	0, EQ_TOKEN},
-#define OFS_GT		20
-     {'>',	0,	0, GT_TOKEN},
-     {'>',	'=',	0, GE_TOKEN},
-#define OFS_AT		22
-     {'@',	0,	0, DEREF_TOKEN},
-#define OFS_POW		23
-     {'^',	0,	0, POW_TOKEN},
-#define OFS_BOR		24
-     {'|',	0,	0, BOR_TOKEN},
-     {'|',	'|',	0, EOF_TOKEN},
-     {'|',	'=',	0, BOREQS_TOKEN},
-#define OFS_BNOT	27
-     {'~',	0,	0, BNOT_TOKEN},
-     {	0,	0,	0, EOF_TOKEN}
-};
-
-static unsigned char Char_Type_Table[256][2] =
-{
- { NL_CHAR, 0 },	/* 0x0 */   { BAD_CHAR, 0 },	/* 0x1 */
- { BAD_CHAR, 0 },	/* 0x2 */   { BAD_CHAR, 0 },	/* 0x3 */
- { BAD_CHAR, 0 },	/* 0x4 */   { BAD_CHAR, 0 },	/* 0x5 */
- { BAD_CHAR, 0 },	/* 0x6 */   { BAD_CHAR, 0 },	/* 0x7 */
- { WHITE_CHAR, 0 },	/* 0x8 */   { WHITE_CHAR, 0 },	/* 0x9 */
- { NL_CHAR, 0 },	/* \n */   { WHITE_CHAR, 0 },	/* 0xb */
- { WHITE_CHAR, 0 },	/* 0xc */   { WHITE_CHAR, 0 },	/* \r */
- { BAD_CHAR, 0 },	/* 0xe */   { BAD_CHAR, 0 },	/* 0xf */
- { BAD_CHAR, 0 },	/* 0x10 */  { BAD_CHAR, 0 },	/* 0x11 */
- { BAD_CHAR, 0 },	/* 0x12 */  { BAD_CHAR, 0 },	/* 0x13 */
- { BAD_CHAR, 0 },	/* 0x14 */  { BAD_CHAR, 0 },	/* 0x15 */
- { BAD_CHAR, 0 },	/* 0x16 */  { BAD_CHAR, 0 },	/* 0x17 */
- { BAD_CHAR, 0 },	/* 0x18 */  { BAD_CHAR, 0 },	/* 0x19 */
- { BAD_CHAR, 0 },	/* 0x1a */  { BAD_CHAR, 0 },	/* 0x1b */
- { BAD_CHAR, 0 },	/* 0x1c */  { BAD_CHAR, 0 },	/* 0x1d */
- { BAD_CHAR, 0 },	/* 0x1e */  { BAD_CHAR, 0 },	/* 0x1f */
- { WHITE_CHAR, 0 },	/* 0x20 */  { EXCL_CHAR, OFS_EXCL },	/* ! */
- { DQUOTE_CHAR, 0 },	/* " */	    { OP_CHAR, OFS_POUND },	/* # */
- { ALPHA_CHAR, 0 },	/* $ */	    { NL_CHAR, 0 },/* % */
- { OP_CHAR, OFS_BAND },	/* & */	    { QUOTE_CHAR, 0 },	/* ' */
- { SEP_CHAR, OPAREN_TOKEN },	/* ( */	    { SEP_CHAR, CPAREN_TOKEN },	/* ) */
- { OP_CHAR, OFS_STAR },	/* * */	    { OP_CHAR, OFS_PLUS},	/* + */
- { SEP_CHAR, COMMA_TOKEN },	/* , */	    { OP_CHAR, OFS_MINUS },	/* - */
- { DOT_CHAR, 0 },	/* . */	    { OP_CHAR, OFS_DIV },	/* / */
- { DIGIT_CHAR, 0 },	/* 0 */	    { DIGIT_CHAR, 0 },	/* 1 */
- { DIGIT_CHAR, 0 },	/* 2 */	    { DIGIT_CHAR, 0 },	/* 3 */
- { DIGIT_CHAR, 0 },	/* 4 */	    { DIGIT_CHAR, 0 },	/* 5 */
- { DIGIT_CHAR, 0 },	/* 6 */	    { DIGIT_CHAR, 0 },	/* 7 */
- { DIGIT_CHAR, 0 },	/* 8 */	    { DIGIT_CHAR, 0 },	/* 9 */
- { SEP_CHAR, COLON_TOKEN },	/* : */	    { SEP_CHAR, SEMICOLON_TOKEN },	/* ; */
- { OP_CHAR, OFS_LT },	/* < */	    { OP_CHAR, OFS_EQS },	/* = */
- { OP_CHAR, OFS_GT },	/* > */	    { BAD_CHAR, 0 },	/* ? */
- { OP_CHAR, OFS_AT},	/* @ */	    { ALPHA_CHAR, 0 },	/* A */
- { ALPHA_CHAR, 0 },	/* B */	    { ALPHA_CHAR, 0 },	/* C */
- { ALPHA_CHAR, 0 },	/* D */	    { ALPHA_CHAR, 0 },	/* E */
- { ALPHA_CHAR, 0 },	/* F */	    { ALPHA_CHAR, 0 },	/* G */
- { ALPHA_CHAR, 0 },	/* H */	    { ALPHA_CHAR, 0 },	/* I */
- { ALPHA_CHAR, 0 },	/* J */	    { ALPHA_CHAR, 0 },	/* K */
- { ALPHA_CHAR, 0 },	/* L */	    { ALPHA_CHAR, 0 },	/* M */
- { ALPHA_CHAR, 0 },	/* N */	    { ALPHA_CHAR, 0 },	/* O */
- { ALPHA_CHAR, 0 },	/* P */	    { ALPHA_CHAR, 0 },	/* Q */
- { ALPHA_CHAR, 0 },	/* R */	    { ALPHA_CHAR, 0 },	/* S */
- { ALPHA_CHAR, 0 },	/* T */	    { ALPHA_CHAR, 0 },	/* U */
- { ALPHA_CHAR, 0 },	/* V */	    { ALPHA_CHAR, 0 },	/* W */
- { ALPHA_CHAR, 0 },	/* X */	    { ALPHA_CHAR, 0 },	/* Y */
- { ALPHA_CHAR, 0 },	/* Z */	    { SEP_CHAR, OBRACKET_TOKEN },	/* [ */
- { BAD_CHAR, 0 },	/* \ */	    { SEP_CHAR, CBRACKET_TOKEN },	/* ] */
- { OP_CHAR, OFS_POW },	/* ^ */	    { ALPHA_CHAR, 0 },	/* _ */
- { BAD_CHAR, 0 },	/* ` */	    { ALPHA_CHAR, 0 },	/* a */
- { ALPHA_CHAR, 0 },	/* b */	    { ALPHA_CHAR, 0 },	/* c */
- { ALPHA_CHAR, 0 },	/* d */	    { ALPHA_CHAR, 0 },	/* e */
- { ALPHA_CHAR, 0 },	/* f */	    { ALPHA_CHAR, 0 },	/* g */
- { ALPHA_CHAR, 0 },	/* h */	    { ALPHA_CHAR, 0 },	/* i */
- { ALPHA_CHAR, 0 },	/* j */	    { ALPHA_CHAR, 0 },	/* k */
- { ALPHA_CHAR, 0 },	/* l */	    { ALPHA_CHAR, 0 },	/* m */
- { ALPHA_CHAR, 0 },	/* n */	    { ALPHA_CHAR, 0 },	/* o */
- { ALPHA_CHAR, 0 },	/* p */	    { ALPHA_CHAR, 0 },	/* q */
- { ALPHA_CHAR, 0 },	/* r */	    { ALPHA_CHAR, 0 },	/* s */
- { ALPHA_CHAR, 0 },	/* t */	    { ALPHA_CHAR, 0 },	/* u */
- { ALPHA_CHAR, 0 },	/* v */	    { ALPHA_CHAR, 0 },	/* w */
- { ALPHA_CHAR, 0 },	/* x */	    { ALPHA_CHAR, 0 },	/* y */
- { ALPHA_CHAR, 0 },	/* z */	    { SEP_CHAR, OBRACE_TOKEN },	/* { */
- { OP_CHAR, OFS_BOR },	/* | */	    { SEP_CHAR, CBRACE_TOKEN },	/* } */
- { OP_CHAR, OFS_BNOT },	/* ~ */	    { BAD_CHAR, 0 },	/* 0x7f */
-   
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
-};
-
-int _SLcheck_identifier_syntax (char *name)
-{
-   unsigned char *p;
-   
-   p = (unsigned char *) name;
-   if (ALPHA_CHAR == Char_Type_Table[*p][0]) while (1)
-     {
-	unsigned ch;
-	unsigned char type;
-
-	ch = *++p;
-
-	type = Char_Type_Table [ch][0];
-	if ((type != ALPHA_CHAR) && (type != DIGIT_CHAR))
-	  {
-	     if (ch == 0)
-	       return 0;
-	     break;
-	  }
-     }
-   
-   SLang_verror (SL_SYNTAX_ERROR, 
-		 "Name %s contains an illegal character", name);
-   return -1;
-}
-
-static unsigned char prep_get_char (void)
-{
-   register unsigned char ch;
-
-   if (0 != (ch = *Input_Line_Pointer++))
-     return ch;
-
-   Input_Line_Pointer--;
-   return 0;
-}
-
-static void unget_prep_char (unsigned char ch)
-{
-   if ((Input_Line_Pointer != Input_Line)
-       && (ch != 0))
-     Input_Line_Pointer--;
-   /* *Input_Line_Pointer = ch; -- Do not modify the Input_Line */
-}
-
-#include "keywhash.c"
-
-static int get_ident_token (_SLang_Token_Type *tok, unsigned char *s, unsigned int len)
-{
-   unsigned char ch;
-   unsigned char type;
-   Keyword_Table_Type *table;
-
-   while (1)
-     {
-	ch = prep_get_char ();
-	type = CHAR_CLASS (ch);
-	if ((type != ALPHA_CHAR) && (type != DIGIT_CHAR))
-	  {
-	     unget_prep_char (ch);
-	     break;
-	  }
-	s [len++] = ch;
-     }
-
-   s[len] = 0;
-
-   /* check if keyword */
-   table = is_keyword ((char *) s, len);
-   if (table != NULL)
-     {
-	tok->v.s_val = table->name;
-	return (tok->type = table->type);
-     }
-
-   tok->v.s_val = _SLstring_make_hashed_string ((char *)s, len, &tok->hash);
-   tok->free_sval_flag = 1;
-   return (tok->type = IDENT_TOKEN);
-}
-
-static int get_number_token (_SLang_Token_Type *tok, unsigned char *s, unsigned int len)
-{
-   unsigned char ch;
-   unsigned char type;
-
-   /* Look for pattern  [0-9.xX]*([eE][-+]?[digits])?[ijfhul]? */
-   while (1)
-     {
-	ch = prep_get_char ();
-
-	type = CHAR_CLASS (ch);
-	if ((type != DIGIT_CHAR) && (type != DOT_CHAR))
-	  {
-	     if ((ch != 'x') && (ch != 'X'))
-	       break;
-	     /* It must be hex */
-	     do
-	       {
-		  if (len == (MAX_TOKEN_LEN - 1))
-		    goto too_long_return_error;
-
-		  s[len++] = ch;
-		  ch = prep_get_char ();
-		  type = CHAR_CLASS (ch);
-	       }
-	     while ((type == DIGIT_CHAR) || (type == ALPHA_CHAR));
-	     break;
-	  }
-	if (len == (MAX_TOKEN_LEN - 1))
-	  goto too_long_return_error;
-	s [len++] = ch;
-     }
-
-   /* At this point, type and ch are synchronized */
-
-   if ((ch == 'e') || (ch == 'E'))
-     {
-	if (len == (MAX_TOKEN_LEN - 1))
-	  goto too_long_return_error;
-	s[len++] = ch;
-	ch = prep_get_char ();
-	if ((ch == '+') || (ch == '-'))
-	  {
-	     if (len == (MAX_TOKEN_LEN - 1))
-	       goto too_long_return_error;
-	     s[len++] = ch;
-	     ch = prep_get_char ();
-	  }
-
-	while (DIGIT_CHAR == (type = CHAR_CLASS(ch)))
-	  {
-	     if (len == (MAX_TOKEN_LEN - 1))
-	       goto too_long_return_error;
-	     s[len++] = ch;
-	     ch = prep_get_char ();
-	  }
-     }
-
-   while (ALPHA_CHAR == type)
-     {
-	if (len == (MAX_TOKEN_LEN - 1))
-	  goto too_long_return_error;
-	s[len++] = ch;
-	ch = prep_get_char ();
-	type = CHAR_CLASS(ch);
-     }
-
-   unget_prep_char (ch);
-   s[len] = 0;
-
-   switch (SLang_guess_type ((char *) s))
-     {
-      default:
-	tok->v.s_val = (char *) s;
-	_SLparse_error ("Not a number", tok, 0);
-	return (tok->type = EOF_TOKEN);
-
-#if SLANG_HAS_FLOAT
-      case SLANG_FLOAT_TYPE:
-	tok->v.s_val = _SLstring_make_hashed_string ((char *)s, len, &tok->hash);
-	tok->free_sval_flag = 1;
-	return (tok->type = FLOAT_TOKEN);
-
-      case SLANG_DOUBLE_TYPE:
-	tok->v.s_val = _SLstring_make_hashed_string ((char *)s, len, &tok->hash);
-	tok->free_sval_flag = 1;
-	return (tok->type = DOUBLE_TOKEN);
-#endif
-#if SLANG_HAS_COMPLEX
-      case SLANG_COMPLEX_TYPE:
-	tok->v.s_val = _SLstring_make_hashed_string ((char *)s, len, &tok->hash);
-	tok->free_sval_flag = 1;
-	return (tok->type = COMPLEX_TOKEN);
-#endif
-      case SLANG_CHAR_TYPE:
-	tok->v.long_val = (char)SLatol (s);
-	return tok->type = CHAR_TOKEN;
-      case SLANG_UCHAR_TYPE:
-	tok->v.long_val = (unsigned char)SLatol (s);
-	return tok->type = UCHAR_TOKEN;
-      case SLANG_SHORT_TYPE:
-	tok->v.long_val = (short)SLatol (s);
-	return tok->type = SHORT_TOKEN;
-      case SLANG_USHORT_TYPE:
-	tok->v.long_val = (unsigned short)SLatoul (s);
-	return tok->type = USHORT_TOKEN;
-      case SLANG_INT_TYPE:
-	tok->v.long_val = (int)SLatol (s);
-	return tok->type = INT_TOKEN;
-      case SLANG_UINT_TYPE:
-	tok->v.long_val = (unsigned int)SLatoul (s);
-	return tok->type = UINT_TOKEN;
-      case SLANG_LONG_TYPE:
-	tok->v.long_val = SLatol (s);
-	return tok->type = LONG_TOKEN;
-      case SLANG_ULONG_TYPE:
-	tok->v.long_val = SLatoul (s);
-	return tok->type = ULONG_TOKEN;
-     }
-
-   too_long_return_error:
-   _SLparse_error ("Number too long for buffer", NULL, 0);
-   return (tok->type == EOF_TOKEN);
-}
-
-static int get_op_token (_SLang_Token_Type *tok, char ch)
-{
-   unsigned int offset;
-   char second_char;
-   unsigned char type;
-   char *name;
-
-   /* operators are: + - / * ++ -- += -= = == != > < >= <= | etc..
-    * These lex to the longest valid operator token.
-    */
-
-   offset = CHAR_DATA((unsigned char) ch);
-   if (0 == Operators [offset][1])
-     {
-	name = Operators [offset];
-	type = name [3];
-     }
-   else
-     {
-	type = EOF_TOKEN;
-	name = NULL;
-     }
-
-   second_char = prep_get_char ();
-   do
-     {
-	if (second_char == Operators[offset][1])
-	  {
-	     name = Operators [offset];
-	     type = name [3];
-	     break;
-	  }
-	offset++;
-     }
-   while (ch == Operators[offset][0]);
-
-   tok->type = type;
-
-   if (type == EOF_TOKEN)
-     {
-	_SLparse_error ("Operator not supported", NULL, 0);
-	return type;
-     }
-
-   tok->v.s_val = name;
-
-   if (name[1] == 0)
-     unget_prep_char (second_char);
-
-   return type;
-}
-
-/* If this returns non-zero, then it is a binary string */
-static int expand_escaped_string (register char *s,
-				  register char *t, register char *tmax,
-				  unsigned int *lenp)
-{
-   char *s0;
-   int is_binary = 0;
-   char ch;
-
-   s0 = s;
-   while (t < tmax)
-     {
-	ch = *t++;
-	if (ch == '\\')
-	  {
-	     t = _SLexpand_escaped_char (t, &ch);
-	     if (ch == 0) is_binary = 1;
-	  }
-	*s++ = ch;
-     }
-   *s = 0;
-
-   *lenp = (unsigned char) (s - s0);
-   return is_binary;
-}
-
-static int get_string_token (_SLang_Token_Type *tok, unsigned char quote_char,
-			     unsigned char *s)
-{
-   unsigned char ch;
-   unsigned int len = 0;
-   int has_quote = 0;
-   int is_binary;
-
-   while (1)
-     {
-	ch = prep_get_char ();
-	if (ch == 0)
-	  {
-	     _SLparse_error("Expecting quote-character", NULL, 0);
-	     return (tok->type = EOF_TOKEN);
-	  }
-	if (ch == quote_char) break;
-
-	s[len++] = ch;
-
-	if (len == (MAX_TOKEN_LEN - 1))
-	  {
-	     _SLparse_error ("String too long for buffer", NULL, 0);
-	     return (tok->type == EOF_TOKEN);
-	  }
-
-	if (ch == '\\')
-	  {
-	     has_quote = 1;
-	     ch = prep_get_char ();
-	     s[len++] = ch;
-	  }
-     }
-
-   s[len] = 0;
-
-   if (has_quote)
-     is_binary = expand_escaped_string ((char *) s, (char *)s, (char *)s + len, &len);
-   else is_binary = 0;
-
-   if ('"' == quote_char)
-     {
-	tok->free_sval_flag = 1;
-	if (is_binary)
-	  {
-	     tok->v.b_val = SLbstring_create (s, len);
-	     return tok->type = BSTRING_TOKEN;
-	  }
-	else
-	  {
-	     tok->v.s_val = _SLstring_make_hashed_string ((char *)s,
-							  len,
-							  &tok->hash);
-	     tok->free_sval_flag = 1;
-	     return (tok->type = STRING_TOKEN);
-	  }
-     }
-
-   /* else single character */
-   if (s[1] != 0)
-     {
-	_SLparse_error("Single char expected", NULL, 0);
-	return (tok->type = EOF_TOKEN);
-     }
-
-   tok->v.long_val = s[0];
-   return (tok->type = UCHAR_TOKEN);
-}
-
-static int extract_token (_SLang_Token_Type *tok, unsigned char ch, unsigned char t)
-{
-   unsigned char s [MAX_TOKEN_LEN];
-   unsigned int slen;
-
-   s[0] = (char) ch;
-   slen = 1;
-
-   switch (t)
-     {
-      case ALPHA_CHAR:
-	return get_ident_token (tok, s, slen);
-
-      case OP_CHAR:
-	return get_op_token (tok, ch);
-
-      case DIGIT_CHAR:
-	return get_number_token (tok, s, slen);
-
-      case EXCL_CHAR:
-	ch = prep_get_char ();
-	s [slen++] = ch;
-	t = CHAR_CLASS(ch);
-	if (t == ALPHA_CHAR) return get_ident_token (tok, s, slen);
-	if (t == OP_CHAR)
-	  {
-	     unget_prep_char (ch);
-	     return get_op_token (tok, '!');
-	  }
-	_SLparse_error("Misplaced !", NULL, 0);
-	return -1;
-
-      case DOT_CHAR:
-	ch = prep_get_char ();
-	if (DIGIT_CHAR == CHAR_CLASS(ch))
-	  {
-	     s [slen++] = ch;
-	     return get_number_token (tok, s, slen);
-	  }
-	unget_prep_char (ch);
-	return (tok->type = DOT_TOKEN);
-
-      case SEP_CHAR:
-	return (tok->type = CHAR_DATA(ch));
-
-      case DQUOTE_CHAR:
-      case QUOTE_CHAR:
-	return get_string_token (tok, ch, s);
-
-      default:
-	_SLparse_error("Invalid character", NULL, 0);
-	return (tok->type = EOF_TOKEN);
-     }
-}
-
-int _SLget_rpn_token (_SLang_Token_Type *tok)
-{
-   unsigned char ch;
-
-   tok->v.s_val = "??";
-   while ((ch = *Input_Line_Pointer) != 0)
-     {
-	unsigned char t;
-
-	Input_Line_Pointer++;
-	if (WHITE_CHAR == (t = CHAR_CLASS(ch)))
-	  continue;
-
-	if (NL_CHAR == t)
-	  break;
-
-	return extract_token (tok, ch, t);
-     }
-   Input_Line_Pointer = Empty_Line;
-   return EOF_TOKEN;
-}
-
-int _SLget_token (_SLang_Token_Type *tok)
-{
-   unsigned char ch;
-   unsigned char t;
-
-   tok->num_refs = 1;
-   tok->free_sval_flag = 0;
-   tok->v.s_val = "??";
-#if _SLANG_HAS_DEBUG_CODE
-   tok->line_number = LLT->line_num;
-#endif
-   if (SLang_Error || (Input_Line == NULL))
-     return (tok->type = EOF_TOKEN);
-
-   while (1)
-     {
-	ch = *Input_Line_Pointer++;
-	if (WHITE_CHAR == (t = CHAR_CLASS (ch)))
-	  continue;
-
-	if (t != NL_CHAR)
-	  return extract_token (tok, ch, t);
-
-	do
-	  {
-	     LLT->line_num++;
-#if _SLANG_HAS_DEBUG_CODE
-	     tok->line_number++;
-#endif
-	     Input_Line = LLT->read(LLT);
-	     if ((NULL == Input_Line) || SLang_Error)
-	       {
-		  Input_Line_Pointer = Input_Line = NULL;
-		  return (tok->type = EOF_TOKEN);
-	       }
-	  }
-	while (0 == SLprep_line_ok(Input_Line, This_SLpp));
-
-	Input_Line_Pointer = Input_Line;
-	if (*Input_Line_Pointer == '.')
-	  {
-	     Input_Line_Pointer++;
-	     return tok->type = RPN_TOKEN;
-	  }
-     }
-}
-
-static int prep_exists_function (char *line, char comment)
-{
-   char buf[MAX_FILE_LINE_LEN], *b, *bmax;
-   unsigned char ch;
-
-   bmax = buf + (sizeof (buf) - 1);
-
-   while (1)
-     {
-	/* skip whitespace */
-	while ((ch = (unsigned char) *line),
-	       ch && (ch != '\n') && (ch <= ' '))
-	  line++;
-
-	if ((ch <= '\n')
-	    || (ch == (unsigned char) comment)) break;
-
-	b = buf;
-	while ((ch = (unsigned char) *line) > ' ')
-	  {
-	     if (b < bmax) *b++ = (char) ch;
-	     line++;
-	  }
-	*b = 0;
-
-	if (SLang_is_defined (buf))
-	  return 1;
-     }
-
-   return 0;
-}
-
-static int prep_eval_expr (char *expr)
-{
-   int ret;
-
-   if (0 != SLang_load_string (expr))
-     return -1;
-   if (-1 == SLang_pop_integer (&ret))
-     return -1;
-   return (ret != 0);
-}
-
-
-int SLang_load_object (SLang_Load_Type *x)
-{
-   SLPreprocess_Type this_pp;
-   SLPreprocess_Type *save_this_pp;
-   SLang_Load_Type *save_llt;
-   char *save_input_line, *save_input_line_ptr;
-#if _SLANG_HAS_DEBUG_CODE
-   int save_compile_line_num_info;
-#endif
-   int save_auto_declare_variables;
-
-   if (SLprep_exists_hook == NULL)
-     SLprep_exists_hook = prep_exists_function;
-
-   if (_SLprep_eval_hook == NULL)
-     _SLprep_eval_hook = prep_eval_expr;
-
-   if (-1 == SLprep_open_prep (&this_pp)) return -1;
-
-   if (-1 == _SLcompile_push_context (x))
-     return -1;
-
-#if _SLANG_HAS_DEBUG_CODE
-   save_compile_line_num_info = _SLang_Compile_Line_Num_Info;
-#endif
-   save_this_pp = This_SLpp;
-   save_input_line = Input_Line;
-   save_input_line_ptr = Input_Line_Pointer;
-   save_llt = LLT;
-   save_auto_declare_variables = _SLang_Auto_Declare_Globals;
-
-   This_SLpp = &this_pp;
-   Input_Line_Pointer = Input_Line = Empty_Line;
-   LLT = x;
-
-   x->line_num = 0;
-   x->parse_level = 0;
-   _SLang_Auto_Declare_Globals = x->auto_declare_globals;
-
-#if _SLANG_HAS_DEBUG_CODE
-   _SLang_Compile_Line_Num_Info = Default_Compile_Line_Num_Info;
-#endif
-
-   _SLparse_start (x);
-   if (SLang_Error)
-     do_line_file_error (x->line_num, x->name);
-
-   _SLang_Auto_Declare_Globals = save_auto_declare_variables;
-
-   if (SLang_Error) SLang_restart (0);
-
-   (void) _SLcompile_pop_context ();
-
-   Input_Line = save_input_line;
-   Input_Line_Pointer = save_input_line_ptr;
-   LLT = save_llt;
-   This_SLpp = save_this_pp;
-
-#if _SLANG_HAS_DEBUG_CODE
-   _SLang_Compile_Line_Num_Info = save_compile_line_num_info;
-#endif
-
-   if (SLang_Error) return -1;
-   return 0;
-}
-
-SLang_Load_Type *SLallocate_load_type (char *name)
-{
-   SLang_Load_Type *x;
-
-   if (NULL == (x = (SLang_Load_Type *)SLmalloc (sizeof (SLang_Load_Type))))
-     return NULL;
-   memset ((char *) x, 0, sizeof (SLang_Load_Type));
-
-   if (name == NULL) name = "";
-
-   x->name = SLang_create_slstring (name);
-   if (x->name == NULL)
-     {
-	SLfree ((char *) x);
-	return NULL;
-     }
-   return x;
-}
-
-void SLdeallocate_load_type (SLang_Load_Type *x)
-{
-   if (x != NULL)
-     {
-	SLang_free_slstring (x->name);
-	SLfree ((char *) x);
-     }
-}
-
-typedef struct
-{
-   char *string;
-   char *ptr;
-}
-String_Client_Data_Type;
-
-static char *read_from_string (SLang_Load_Type *x)
-{
-   String_Client_Data_Type *data;
-   char *s, *s1, ch;
-
-   data = (String_Client_Data_Type *)x->client_data;
-   s1 = s = data->ptr;
-
-   if (*s == 0)
-     return NULL;
-
-   while ((ch = *s) != 0)
-     {
-	s++;
-	if (ch == '\n')
-	  break;
-     }
-
-   data->ptr = s;
-   return s1;
-}
-
-int SLang_load_string (char *string)
-{
-   SLang_Load_Type *x;
-   String_Client_Data_Type data;
-   int ret;
-
-   if (string == NULL)
-     return -1;
-
-   /* Grab a private copy in case loading modifies string */
-   if (NULL == (string = SLang_create_slstring (string)))
-     return -1;
-
-   /* To avoid creating a static data space for every string loaded,
-    * all string objects will be regarded as identical.  So, identify
-    * all of them by ***string***
-    */
-   if (NULL == (x = SLallocate_load_type ("***string***")))
-     {
-	SLang_free_slstring (string);
-	return -1;
-     }
-
-   x->client_data = (VOID_STAR) &data;
-   x->read = read_from_string;
-
-   data.ptr = data.string = string;
-   if (-1 == (ret = SLang_load_object (x)))
-     SLang_verror (SLang_Error, "called from eval: %s", string);
-
-   SLang_free_slstring (string);
-   SLdeallocate_load_type (x);
-   return ret;
-}
-
-typedef struct
-{
-   char *buf;
-   FILE *fp;
-}
-File_Client_Data_Type;
-
-char *SLang_User_Prompt;
-static char *read_from_file (SLang_Load_Type *x)
-{
-   FILE *fp;
-   File_Client_Data_Type *c;
-
-   c = (File_Client_Data_Type *)x->client_data;
-   fp = c->fp;
-
-   if ((fp == stdin) && (SLang_User_Prompt != NULL))
-     {
-	fputs (SLang_User_Prompt, stdout);
-	fflush (stdout);
-     }
-
-   return fgets (c->buf, MAX_FILE_LINE_LEN, c->fp);
-}
-
-/* Note that file could be freed from Slang during run of this routine
- * so get it and store it !! (e.g., autoloading)
- */
-int (*SLang_Load_File_Hook) (char *);
-int SLang_load_file (char *f)
-{
-   File_Client_Data_Type client_data;
-   SLang_Load_Type *x;
-   char *name, *buf;
-   FILE *fp;
-
-   if (SLang_Load_File_Hook != NULL)
-     return (*SLang_Load_File_Hook) (f);
-
-   if (f == NULL) name = "<stdin>"; else name = f;
-
-   name = SLang_create_slstring (name);
-   if (name == NULL)
-     return -1;
-
-   if (NULL == (x = SLallocate_load_type (name)))
-     {
-	SLang_free_slstring (name);
-	return -1;
-     }
-
-   buf = NULL;
-
-   if (f != NULL)
-     fp = fopen (f, "r");
-   else
-     fp = stdin;
-
-   if (fp == NULL)
-     SLang_verror (SL_OBJ_NOPEN, "Unable to open %s", name);
-   else if (NULL != (buf = SLmalloc (MAX_FILE_LINE_LEN + 1)))
-     {
-	client_data.fp = fp;
-	client_data.buf = buf;
-	x->client_data = (VOID_STAR) &client_data;
-	x->read = read_from_file;
-
-	(void) SLang_load_object (x);
-     }
-
-   if ((fp != NULL) && (fp != stdin))
-     fclose (fp);
-
-   SLfree (buf);
-   SLang_free_slstring (name);
-   SLdeallocate_load_type (x);
-
-   if (SLang_Error)
-     return -1;
-
-   return 0;
-}
-
-int SLang_guess_type (char *t)
-{
-   char *p;
-   register char ch;
-   int modifier = 0;
-
-   if (*t == '-') t++;
-   p = t;
-
-#if SLANG_HAS_FLOAT
-   if (*p != '.')
-     {
-#endif
-	modifier = 0;
-	while ((*p >= '0') && (*p <= '9')) p++;
-	if (t == p) return (SLANG_STRING_TYPE);
-	if ((*p == 'x') && (p == t + 1))   /* 0x?? */
-	  {
-	     modifier |= 8;
-	     p++;
-	     while (ch = *p,
-		    ((ch >= '0') && (ch <= '9'))
-		    || (((ch | 0x20) >= 'a') && ((ch | 0x20) <= 'f'))) p++;
-	  }
-
-	/* Now look for UL, LU, UH, HU, L, H modifiers */
-	while ((ch = *p) != 0)
-	  {
-	     ch |= 0x20;
-	     if (ch == 'h') modifier |= 1;
-	     else if (ch == 'l') modifier |= 2;
-	     else if (ch == 'u') modifier |= 4;
-	     else break;
-	     p++;
-	  }
-	if ((1|2) == (modifier & (1|2)))	       /* hl present */
-	  return SLANG_STRING_TYPE;
-
-	if (ch == 0)
-	  {
-	     if ((modifier & 0x7) == 0) return SLANG_INT_TYPE;
-	     if (modifier & 4)
-	       {
-		  if (modifier & 1) return SLANG_USHORT_TYPE;
-		  if (modifier & 2) return SLANG_ULONG_TYPE;
-		  return SLANG_UINT_TYPE;
-	       }
-	     if (modifier & 1) return SLANG_SHORT_TYPE;
-	     if (modifier & 2) return SLANG_LONG_TYPE;
-	     return SLANG_INT_TYPE;
-	  }
-
-	if (modifier) return SLANG_STRING_TYPE;
-#if SLANG_HAS_FLOAT
-     }
-
-   /* now down to double case */
-   if (*p == '.')
-     {
-	p++;
-	while ((*p >= '0') && (*p <= '9')) p++;
-     }
-   if (*p == 0) return(SLANG_DOUBLE_TYPE);
-   if ((*p != 'e') && (*p != 'E'))
-     {
-# if SLANG_HAS_COMPLEX
-	if (((*p == 'i') || (*p == 'j'))
-	    && (p[1] == 0))
-	  return SLANG_COMPLEX_TYPE;
-# endif
-	if (((*p | 0x20) == 'f') && (p[1] == 0))
-	  return SLANG_FLOAT_TYPE;
-
-	return SLANG_STRING_TYPE;
-     }
-
-   p++;
-   if ((*p == '-') || (*p == '+')) p++;
-   while ((*p >= '0') && (*p <= '9')) p++;
-   if (*p != 0)
-     {
-# if SLANG_HAS_COMPLEX
-	if (((*p == 'i') || (*p == 'j'))
-	    && (p[1] == 0))
-	  return SLANG_COMPLEX_TYPE;
-# endif
-	if (((*p | 0x20) == 'f') && (p[1] == 0))
-	  return SLANG_FLOAT_TYPE;
-
-	return SLANG_STRING_TYPE;
-     }
-   return SLANG_DOUBLE_TYPE;
-#else
-   return SLANG_STRING_TYPE;
-#endif				       /* SLANG_HAS_FLOAT */
-}
-
-static int hex_atoul (unsigned char *s, unsigned long *ul)
-{
-   register unsigned char ch;
-   register unsigned long value;
-   register int base;
-
-   s++;				       /* skip the leading 0 */
-
-   /* look for 'x' which indicates hex */
-   if ((*s | 0x20) == 'x')
-     {
-	base = 16;
-	s++;
-	if (*s == 0)
-	  {
-	     SLang_Error = SL_SYNTAX_ERROR;
-	     return -1;
-	  }
-     }
-   else base = 8;
-
-   value = 0;
-   while ((ch = *s++) != 0)
-     {
-	char ch1 = ch | 0x20;
-	switch (ch1)
-	  {
-	   default:
-	     SLang_Error = SL_SYNTAX_ERROR;
-	     break;
-
-	   case 'u':
-	   case 'l':
-	   case 'h':
-	     *ul = value;
-	     return 0;
-
-	   case '8':
-	   case '9':
-	     if (base != 16) SLang_Error = SL_SYNTAX_ERROR;
-	     /* drop */
-	   case '0':
-	   case '1':
-	   case '2':
-	   case '3':
-	   case '4':
-	   case '5':
-	   case '6':
-	   case '7':
-	     ch1 -= '0';
-	     break;
-
-	   case 'a':
-	   case 'b':
-	   case 'c':
-	   case 'd':
-	   case 'e':
-	   case 'f':
-	     if (base != 16) SLang_Error = SL_SYNTAX_ERROR;
-	     ch1 = (ch1 - 'a') + 10;
-	     break;
-	  }
-	value = value * base + ch1;
-     }
-   *ul = value;
-   return 0;
-}
-
-/* Note: These routines do not check integer overflow.  I would use the C
- * library functions atol and atoul but some implementations check overflow
- * and some do not.  The following implementations provide a consistent
- * behavior.
- */
-unsigned long SLatoul (unsigned char *s)
-{
-   int sign;
-   unsigned long value;
-
-   if (*s == '-') sign = -1;
-   else
-     {
-	sign = 1;
-	if (*s == '+') s++;
-     }
-
-   if (*s == '0')
-     {
-	if (-1 == hex_atoul (s, &value))
-	  return (unsigned long) -1;
-     }
-   else
-     {
-	while (WHITE_CHAR == CHAR_CLASS(*s))
-	  s++;
-
-	value = 0;
-	while (DIGIT_CHAR == CHAR_CLASS(*s))
-	  {
-	     value = value * 10 + (unsigned long) (*s - '0');
-	     s++;
-	  }
-     }
-
-   if (sign == -1)
-     value = (unsigned long)-1L * value;
-
-   return value;
-}
-
-long SLatol (unsigned char *s)
-{
-   while (WHITE_CHAR == CHAR_CLASS(*s))
-     s++;
-
-   if (*s == '-')
-     {
-	long value = (long) SLatoul (s+1);
-	return -value;
-     }
-   return (long) SLatoul (s);
-}
-
-int SLatoi (unsigned char *s)
-{
-   return (int) SLatol (s);
-}
-
-static char *check_byte_compiled_token (char *buf)
-{
-   unsigned int len_lo, len_hi, len;
-
-   len_lo = (unsigned char) *Input_Line_Pointer++;
-   if ((len_lo < 32)
-       || ((len_hi = (unsigned char)*Input_Line_Pointer++) < 32)
-       || ((len = (len_lo - 32) | ((len_hi - 32) << 7)) >= MAX_TOKEN_LEN))
-     {
-	SLang_doerror ("Byte compiled file appears corrupt");
-	return NULL;
-     }
-
-   SLMEMCPY (buf, Input_Line_Pointer, len);
-   buf += len;
-   Input_Line_Pointer += len;
-   *buf = 0;
-   return buf;
-}
-
-void _SLcompile_byte_compiled (void)
-{
-   unsigned char type;
-   _SLang_Token_Type tok;
-   char buf[MAX_TOKEN_LEN];
-   char *ebuf;
-   unsigned int len;
-
-   memset ((char *) &tok, 0, sizeof (_SLang_Token_Type));
-
-   while (SLang_Error == 0)
-     {
-	top_of_switch:
-	type = (unsigned char) *Input_Line_Pointer++;
-	switch (type)
-	  {
-	   case '\n':
-	   case 0:
-	     if (NULL == (Input_Line = LLT->read(LLT)))
-	       {
-		  Input_Line_Pointer = Input_Line = NULL;
-		  return;
-	       }
-	     Input_Line_Pointer = Input_Line;
-	     goto top_of_switch;
-
-	   case LINE_NUM_TOKEN:
-	   case CHAR_TOKEN:
-	   case UCHAR_TOKEN:
-	   case SHORT_TOKEN:
-	   case USHORT_TOKEN:
-	   case INT_TOKEN:
-	   case UINT_TOKEN:
-	   case LONG_TOKEN:
-	   case ULONG_TOKEN:
-	     if (NULL == check_byte_compiled_token (buf))
-	       return;
-	     tok.v.long_val = atol (buf);
-	     break;
-
-	   case COMPLEX_TOKEN:
-	   case FLOAT_TOKEN:
-	   case DOUBLE_TOKEN:
-	     if (NULL == check_byte_compiled_token (buf))
-	       return;
-	     tok.v.s_val = buf;
-	     break;
-
-	   case ESC_STRING_TOKEN:
-	     if (NULL == (ebuf = check_byte_compiled_token (buf)))
-	       return;
-	     tok.v.s_val = buf;
-	     if (expand_escaped_string (buf, buf, ebuf, &len))
-	       {
-		  tok.hash = len;
-		  type = _BSTRING_TOKEN;
-	       }
-	     else
-	       {
-		  tok.hash = _SLstring_hash ((unsigned char *)buf, (unsigned char *)buf + len);
-		  type = STRING_TOKEN;
-	       }
-	     break;
-
-	   case TMP_TOKEN:
-	   case DEFINE_TOKEN:
-	   case DEFINE_STATIC_TOKEN:
-	   case DEFINE_PRIVATE_TOKEN:
-	   case DEFINE_PUBLIC_TOKEN:
-	   case DOT_TOKEN:
-	   case STRING_TOKEN:
-	   case IDENT_TOKEN:
-	   case _REF_TOKEN:
-	   case _DEREF_ASSIGN_TOKEN:
-	   case _SCALAR_ASSIGN_TOKEN:
-	   case _SCALAR_PLUSEQS_TOKEN:
-	   case _SCALAR_MINUSEQS_TOKEN:
-	   case _SCALAR_TIMESEQS_TOKEN:
-	   case _SCALAR_DIVEQS_TOKEN:
-	   case _SCALAR_BOREQS_TOKEN:
-	   case _SCALAR_BANDEQS_TOKEN:
-	   case _SCALAR_PLUSPLUS_TOKEN:
-	   case _SCALAR_POST_PLUSPLUS_TOKEN:
-	   case _SCALAR_MINUSMINUS_TOKEN:
-	   case _SCALAR_POST_MINUSMINUS_TOKEN:
-	   case _STRUCT_ASSIGN_TOKEN:
-	   case _STRUCT_PLUSEQS_TOKEN:
-	   case _STRUCT_MINUSEQS_TOKEN:
-	   case _STRUCT_TIMESEQS_TOKEN:
-	   case _STRUCT_DIVEQS_TOKEN:
-	   case _STRUCT_BOREQS_TOKEN:
-	   case _STRUCT_BANDEQS_TOKEN:
-	   case _STRUCT_POST_MINUSMINUS_TOKEN:
-	   case _STRUCT_MINUSMINUS_TOKEN:
-	   case _STRUCT_POST_PLUSPLUS_TOKEN:
-	   case _STRUCT_PLUSPLUS_TOKEN:
-	     if (NULL == (ebuf = check_byte_compiled_token (buf)))
-	       return;
-	     tok.v.s_val = buf;
-	     tok.hash = _SLstring_hash ((unsigned char *)buf, (unsigned char *)ebuf);
-	     break;
-
-	   default:
-	     break;
-	  }
-	tok.type = type;
-
-	(*_SLcompile_ptr) (&tok);
-     }
-}
-
-static int escape_string (unsigned char *s, unsigned char *smax,
-			  unsigned char *buf, unsigned char *buf_max,
-			  int *is_escaped)
-{
-   unsigned char ch;
-
-   *is_escaped = 0;
-   while (buf < buf_max)
-     {
-	if (s == smax)
-	  {
-	     *buf = 0;
-	     return 0;
-	  }
-
-	ch = *s++;
-	switch (ch)
-	  {
-	   default:
-	     *buf++ = ch;
-	     break;
-
-	   case 0:
-	     *buf++ = '\\';
-	     if (buf < buf_max) *buf++ = 'x';
-	     if (buf < buf_max) *buf++ = '0';
-	     if (buf < buf_max) *buf++ = '0';
-	     *is_escaped = 1;
-	     break; /* return 0; */
-
-	   case '\n':
-	     *buf++ = '\\';
-	     if (buf < buf_max) *buf++ = 'n';
-	     *is_escaped = 1;
-	     break;
-
-	   case '\r':
-	     *buf++ = '\\';
-	     if (buf < buf_max) *buf++ = 'r';
-	     *is_escaped = 1;
-	     break;
-
-	   case 0x1A:		       /* ^Z */
-	     *buf++ = '\\';
-	     if (buf < buf_max) *buf++ = 'x';
-	     if (buf < buf_max) *buf++ = '1';
-	     if (buf < buf_max) *buf++ = 'A';
-	     *is_escaped = 1;
-	     break;
-
-	   case '\\':
-	     *buf++ = ch;
-	     if (buf < buf_max) *buf++ = ch;
-	     *is_escaped = 1;
-	     break;
-	  }
-     }
-   _SLparse_error ("String too long to byte-compile", NULL, 0);
-   return -1;
-}
-
-static FILE *Byte_Compile_Fp;
-static unsigned int Byte_Compile_Line_Len;
-
-static int bytecomp_write_data (char *buf, unsigned int len)
-{
-   char *err = "Write Error";
-
-   if ((Byte_Compile_Line_Len + len + 1) >= MAX_FILE_LINE_LEN)
-     {
-	if (EOF == fputs ("\n", Byte_Compile_Fp))
-	  {
-	     SLang_doerror (err);
-	     return -1;
-	  }
-	Byte_Compile_Line_Len = 0;
-     }
-
-   if (EOF == fputs (buf, Byte_Compile_Fp))
-     {
-	SLang_doerror (err);
-	return -1;
-     }
-   Byte_Compile_Line_Len += len;
-   return 0;
-}
-
-static void byte_compile_token (_SLang_Token_Type *tok)
-{
-   unsigned char buf [MAX_TOKEN_LEN + 4], *buf_max;
-   unsigned int len;
-   char *b3;
-   int is_escaped;
-   unsigned char *s;
-
-   if (SLang_Error) return;
-
-   buf [0] = (unsigned char) tok->type;
-   buf [1] = 0;
-
-   buf_max = buf + sizeof(buf);
-   b3 = (char *) buf + 3;
-
-   switch (tok->type)
-     {
-      case LINE_NUM_TOKEN:
-      case CHAR_TOKEN:
-      case SHORT_TOKEN:
-      case INT_TOKEN:
-      case LONG_TOKEN:
-	sprintf (b3, "%ld", tok->v.long_val);
-	break;
-
-      case UCHAR_TOKEN:
-      case USHORT_TOKEN:
-      case UINT_TOKEN:
-      case ULONG_TOKEN:
-	sprintf (b3, "%lu", tok->v.long_val);
-	break;
-
-      case _BSTRING_TOKEN:
-	s = (unsigned char *) tok->v.s_val;
-	len = (unsigned int) tok->hash;
-
-	if (-1 == escape_string (s, s + len,
-				 (unsigned char *)b3, buf_max,
-				 &is_escaped))
-	    return;
-
-	buf[0] = ESC_STRING_TOKEN;
-	break;
-
-      case BSTRING_TOKEN:
-	if (NULL == (s = SLbstring_get_pointer (tok->v.b_val, &len)))
-	  return;
-
-	if (-1 == escape_string (s, s + len,
-				 (unsigned char *)b3, buf_max,
-				 &is_escaped))
-	    return;
-	buf[0] = ESC_STRING_TOKEN;
-	break;
-
-      case STRING_TOKEN:
-	s = (unsigned char *)tok->v.s_val;
-
-	if (-1 == escape_string (s, s + strlen ((char *)s),
-				 (unsigned char *)b3, buf_max,
-				 &is_escaped))
-	    return;
-
-	if (is_escaped)
-	  buf[0] = ESC_STRING_TOKEN;
-	break;
-
-	/* a _SCALAR_* token is attached to an identifier. */
-      case _DEREF_ASSIGN_TOKEN:
-      case _SCALAR_ASSIGN_TOKEN:
-      case _SCALAR_PLUSEQS_TOKEN:
-      case _SCALAR_MINUSEQS_TOKEN:
-      case _SCALAR_TIMESEQS_TOKEN:
-      case _SCALAR_DIVEQS_TOKEN:
-      case _SCALAR_BOREQS_TOKEN:
-      case _SCALAR_BANDEQS_TOKEN:
-      case _SCALAR_PLUSPLUS_TOKEN:
-      case _SCALAR_POST_PLUSPLUS_TOKEN:
-      case _SCALAR_MINUSMINUS_TOKEN:
-      case _SCALAR_POST_MINUSMINUS_TOKEN:
-      case DOT_TOKEN:
-      case TMP_TOKEN:
-      case DEFINE_TOKEN:
-      case DEFINE_STATIC_TOKEN:
-      case DEFINE_PRIVATE_TOKEN:
-      case DEFINE_PUBLIC_TOKEN:
-      case FLOAT_TOKEN:
-      case DOUBLE_TOKEN:
-      case COMPLEX_TOKEN:
-      case IDENT_TOKEN:
-      case _REF_TOKEN:
-      case _STRUCT_ASSIGN_TOKEN:
-      case _STRUCT_PLUSEQS_TOKEN:
-      case _STRUCT_MINUSEQS_TOKEN:
-      case _STRUCT_TIMESEQS_TOKEN:
-      case _STRUCT_DIVEQS_TOKEN:
-      case _STRUCT_BOREQS_TOKEN:
-      case _STRUCT_BANDEQS_TOKEN:
-      case _STRUCT_POST_MINUSMINUS_TOKEN:
-      case _STRUCT_MINUSMINUS_TOKEN:
-      case _STRUCT_POST_PLUSPLUS_TOKEN:
-      case _STRUCT_PLUSPLUS_TOKEN:
-	strcpy (b3, tok->v.s_val);
-	break;
-
-      default:
-	b3 = NULL;
-     }
-
-   if (b3 != NULL)
-     {
-	len = strlen (b3);
-	buf[1] = (unsigned char) ((len & 0x7F) + 32);
-	buf[2] = (unsigned char) (((len >> 7) & 0x7F) + 32);
-	len += 3;
-     }
-   else len = 1;
-
-   (void) bytecomp_write_data ((char *)buf, len);
-}
-
-int SLang_byte_compile_file (char *name, int method)
-{
-   char file [1024];
-
-   (void) method;
-   if (strlen (name) + 2 >= sizeof (file))
-     {
-	SLang_verror (SL_INVALID_PARM, "Filename too long");
-	return -1;
-     }
-   sprintf (file, "%sc", name);
-   if (NULL == (Byte_Compile_Fp = fopen (file, "w")))
-     {
-	SLang_verror(SL_OBJ_NOPEN, "%s: unable to open", file);
-	return -1;
-     }
-
-   Byte_Compile_Line_Len = 0;
-   if (-1 != bytecomp_write_data (".#", 2))
-     {
-	_SLcompile_ptr = byte_compile_token;
-	(void) SLang_load_file (name);
-	_SLcompile_ptr = _SLcompile;
-
-	(void) bytecomp_write_data ("\n", 1);
-     }
-
-   if (EOF == fclose (Byte_Compile_Fp))
-     SLang_doerror ("Write Error");
-
-   if (SLang_Error)
-     {
-	SLang_verror (0, "Error processing %s", name);
-	return -1;
-     }
-   return 0;
-}
-
-int SLang_generate_debug_info (int x)
-{
-   int y = Default_Compile_Line_Num_Info;
-   Default_Compile_Line_Num_Info = x;
-   return y;
-}
diff --git a/mdk-stage1/slang/sltypes.c b/mdk-stage1/slang/sltypes.c
deleted file mode 100644
index 05b8741b1..000000000
--- a/mdk-stage1/slang/sltypes.c
+++ /dev/null
@@ -1,966 +0,0 @@
-/* Basic type operations for S-Lang */
-/* Copyright (c) 1992, 1996, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#if SLANG_HAS_FLOAT
-# include <math.h>
-#endif
-
-#define SL_APP_WANTS_FOREACH	       /* for String_Type */
-#include "slang.h"
-#include "_slang.h"
-
-int SLpop_string (char **s) /*{{{*/
-{
-   char *sls;
-
-   *s = NULL;
-
-   if (-1 == SLang_pop_slstring (&sls))
-     return -1;
-
-   if (NULL == (*s = SLmake_string (sls)))
-     {
-	SLang_free_slstring (sls);
-	return -1;
-     }
-
-   SLang_free_slstring (sls);
-   return 0;
-}
-
-/*}}}*/
-
-int SLang_pop_slstring (char **s) /*{{{*/
-{
-   return SLclass_pop_ptr_obj (SLANG_STRING_TYPE, (VOID_STAR *)s);
-}
-
-/*}}}*/
-
-/* if *data != 0, string should be freed upon use. */
-int SLang_pop_string(char **s, int *data) /*{{{*/
-{
-   if (SLpop_string (s))
-     return -1;
-
-   *data = 1;
-   return 0;
-}
-
-/*}}}*/
-
-int _SLang_push_slstring (char *s)
-{
-   if (0 == SLclass_push_ptr_obj (SLANG_STRING_TYPE, (VOID_STAR)s))
-     return 0;
-
-   SLang_free_slstring (s);
-   return -1;
-}
-
-int _SLpush_alloced_slstring (char *s, unsigned int len)
-{
-   if (NULL == (s = _SLcreate_via_alloced_slstring (s, len)))
-     return -1;
-   
-   return _SLang_push_slstring (s);
-}
-
-int SLang_push_string (char *t) /*{{{*/
-{
-   if (t == NULL)
-     return SLang_push_null ();
-
-   if (NULL == (t = SLang_create_slstring (t)))
-     return -1;
-
-   return _SLang_push_slstring (t);
-}
-
-/*}}}*/
-
-int _SLang_dup_and_push_slstring (char *s)
-{
-   if (NULL == (s = _SLstring_dup_slstring (s)))
-     return SLang_push_null ();
-
-   return _SLang_push_slstring (s);
-}
-
-
-/* This function _always_ frees the malloced string */
-int SLang_push_malloced_string (char *c) /*{{{*/
-{
-   int ret;
-
-   ret = SLang_push_string (c);
-   SLfree (c);
-
-   return ret;
-}
-
-/*}}}*/
-
-#if 0
-static int int_int_power (int a, int b)
-{
-   int r, s;
-
-   if (a == 0) return 0;
-   if (b < 0) return 0;
-   if (b == 0) return 1;
-
-   s = 1;
-   if (a < 0)
-     {
-	if ((b % 2) == 1) s = -1;
-	a = -a;
-     }
-
-   /* FIXME: Priority=low
-    * This needs optimized
-    */
-   r = 1;
-   while (b)
-     {
-	r = r * a;
-	b--;
-     }
-   return r * s;
-}
-#endif
-
-static int
-string_string_bin_op_result (int op, unsigned char a, unsigned char b,
-			     unsigned char *c)
-{
-   (void) a;
-   (void) b;
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUS:
-	*c = SLANG_STRING_TYPE;
-	break;
-
-      case SLANG_GT:
-      case SLANG_GE:
-      case SLANG_LT:
-      case SLANG_LE:
-      case SLANG_EQ:
-      case SLANG_NE:
-	*c = SLANG_CHAR_TYPE;
-	break;
-     }
-   return 1;
-}
-
-static int
-string_string_bin_op (int op,
-		      unsigned char a_type, VOID_STAR ap, unsigned int na,
-		      unsigned char b_type, VOID_STAR bp, unsigned int nb,
-		      VOID_STAR cp)
-{
-   char *ic;
-   char **a, **b, **c;
-   unsigned int n, n_max;
-   unsigned int da, db;
-
-   (void) a_type;
-   (void) b_type;
-
-   if (na == 1) da = 0; else da = 1;
-   if (nb == 1) db = 0; else db = 1;
-
-   if (na > nb) n_max = na; else n_max = nb;
-
-   a = (char **) ap;
-   b = (char **) bp;
-   for (n = 0; n < n_max; n++)
-     {
-	if ((*a == NULL) || (*b == NULL))
-	  {
-	     SLang_verror (SL_VARIABLE_UNINITIALIZED, "String element[%u] not initialized for binary operation", n);
-	     return -1;
-	  }
-	a += da; b += db;
-     }
-
-   a = (char **) ap;
-   b = (char **) bp;
-   ic = (char *) cp;
-   c = NULL;
-
-   switch (op)
-     {
-      case SLANG_DIVIDE:
-      case SLANG_MINUS:
-      default:
-	return 0;
-
-       case SLANG_PLUS:
-	/* Concat */
-	c = (char **) cp;
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (NULL == (c[n] = SLang_concat_slstrings (*a, *b)))
-	       goto return_error;
-
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_NE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (0 != strcmp (*a, *b));
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_GT:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (strcmp (*a, *b) > 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_GE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (strcmp (*a, *b) >= 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_LT:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (strcmp (*a, *b) < 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_LE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (strcmp (*a, *b) <= 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_EQ:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (strcmp (*a, *b) == 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-     }
-   return 1;
-
-   return_error:
-   if (c != NULL)
-     {
-	unsigned int nn;
-	for (nn = 0; nn < n; nn++)
-	  {
-	     SLang_free_slstring (c[nn]);
-	     c[nn] = NULL;
-	  }
-	for (nn = n; nn < n_max; nn++)
-	  c[nn] = NULL;
-     }
-   return -1;
-}
-
-static void string_destroy (unsigned char unused, VOID_STAR s)
-{
-   (void) unused;
-   SLang_free_slstring (*(char **) s);
-}
-
-static int string_push (unsigned char unused, VOID_STAR sptr)
-{
-   (void) unused;
-   return SLang_push_string (*(char **) sptr);
-}
-
-static int string_cmp (unsigned char unused, VOID_STAR ap, VOID_STAR bp, int *c)
-{
-   char *a, *b;
-   (void) unused;
-   
-   a = *(char **) ap;
-   b = *(char **) bp;
-   if (a != b)
-     {
-	if (a == NULL) *c = -1;
-	else if (b == NULL) *c = 1;
-	else *c = strcmp (a, b);
-	return 0;
-     }
-   *c = 0;
-   return 0;
-}
-
-static int string_to_int (unsigned char a_type, VOID_STAR ap, unsigned int na,
-			  unsigned char b_type, VOID_STAR bp)
-{
-   char **s;
-   unsigned int i;
-   int *b;
-
-   (void) a_type;
-   (void) b_type;
-
-   s = (char **) ap;
-   b = (int *) bp;
-   for (i = 0; i < na; i++)
-     {
-	if (s[i] == NULL) b[i] = 0;
-	else b[i] = s[i][0];
-     }
-   return 1;
-}
-
-struct _SLang_Foreach_Context_Type
-{
-   char *string;
-   unsigned int n;
-};
-
-static SLang_Foreach_Context_Type *
-string_foreach_open (unsigned char type, unsigned int num)
-{
-   char *s;
-   SLang_Foreach_Context_Type *c;
-
-   (void) type;
-   if (num != 0)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "'foreach using' form not supported by String_Type");
-	SLdo_pop_n (num + 1);
-	return NULL;
-     }
-   if (-1 == SLang_pop_slstring (&s))
-     return NULL;
-
-   c = (SLang_Foreach_Context_Type *)SLmalloc (sizeof (SLang_Foreach_Context_Type));
-   if (c == NULL)
-     {
-	SLang_free_slstring (s);
-	return NULL;
-     }
-
-   memset ((char *) c, 0, sizeof (SLang_Foreach_Context_Type));
-   c->string = s;
-
-   return c;
-}
-
-static void string_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   (void) type;
-   if (c == NULL) return;
-   SLang_free_slstring (c->string);
-   SLfree ((char *) c);
-}
-
-static int string_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   char ch;
-
-   (void) type;
-   ch = c->string[c->n];
-   if (ch == 0)
-     return 0;			       /* done */
-
-   c->n += 1;
-
-   if (-1 == SLclass_push_int_obj (SLANG_INT_TYPE, ch))
-     return -1;
-
-   return 1;
-}
-
-int _SLstring_list_push (_SLString_List_Type *p)
-{
-   unsigned int num;
-   int inum;
-   SLang_Array_Type *at;
-   char **buf;
-
-   if ((buf = p->buf) == NULL)
-     return SLang_push_null ();
-   
-   num = p->num;
-   inum = (int) num;
-   
-   if (num == 0) num++;
-   if (num != p->max_num)
-     {
-	if (NULL == (buf = (char **)SLrealloc ((char *) buf, sizeof (char *) * num)))
-	  {
-	     _SLstring_list_delete (p);
-	     return -1;
-	  }
-	p->max_num = num;
-	p->buf = buf;
-     }
-     
-   if (NULL == (at = SLang_create_array (SLANG_STRING_TYPE, 0, (VOID_STAR) buf, &inum, 1)))
-     {
-	_SLstring_list_delete (p);
-	return -1;
-     }
-   p->buf = NULL;
-   _SLstring_list_delete (p);
-   return SLang_push_array (at, 1);
-}
-
-int _SLstring_list_init (_SLString_List_Type *p, unsigned int max_num, unsigned int delta_num)
-{
-   if (NULL == (p->buf = (char **) SLmalloc (max_num * sizeof (char *))))
-     return -1;
-   
-   p->max_num = max_num;
-   p->num = 0;
-   p->delta_num = delta_num;
-   return 0;
-}
-
-int _SLstring_list_append (_SLString_List_Type *p, char *s)
-{
-   if (s == NULL)
-     {
-	_SLstring_list_delete (p);
-	return -1;
-     }
-
-   if (p->max_num == p->num)
-     {
-	char **b;
-	unsigned int max_num = p->num + p->delta_num;
-	b = (char **)SLrealloc ((char *)p->buf, max_num * sizeof (char *));
-	if (b == NULL)
-	  {
-	     _SLstring_list_delete (p);
-	     SLang_free_slstring (s);
-	     return -1;
-	  }
-	p->buf = b;
-	p->max_num = max_num;
-     }
-   
-   p->buf[p->num] = s;
-   p->num++;
-   return 0;
-}
-
-void _SLstring_list_delete (_SLString_List_Type *p)
-{
-   if (p->buf != NULL)
-     {
-	unsigned int i, imax;
-	char **buf = p->buf;
-	imax = p->num;
-	for (i = 0; i < imax; i++)
-	  SLang_free_slstring (buf[i]);
-	SLfree ((char *)buf);
-	p->buf = NULL;
-     }
-}
-
-/* Ref type */
-int SLang_pop_ref (SLang_Ref_Type **ref)
-{
-   return SLclass_pop_ptr_obj (SLANG_REF_TYPE, (VOID_STAR *)ref);
-}
-
-/* Note: This is ok if ptr is NULL.  Some routines rely on this behavior */
-int _SLang_push_ref (int is_global, VOID_STAR ptr)
-{
-   SLang_Ref_Type *r;
-
-   if (ptr == NULL)
-     return SLang_push_null ();
-
-   r = (SLang_Ref_Type *) SLmalloc (sizeof (SLang_Ref_Type));
-   if (r == NULL) return -1;
-
-   r->is_global = is_global;
-   r->v.nt = (SLang_Name_Type *) ptr;
-
-   if (-1 == SLclass_push_ptr_obj (SLANG_REF_TYPE, (VOID_STAR) r))
-     {
-	SLfree ((char *) r);
-	return -1;
-     }
-   return 0;
-}
-
-static void ref_destroy (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   SLfree ((char *) *(SLang_Ref_Type **)ptr);
-}
-
-void SLang_free_ref (SLang_Ref_Type *ref)
-{
-   SLfree ((char *) ref);
-}
-
-static int ref_push (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Ref_Type *ref;
-
-   (void) type;
-
-   ref = *(SLang_Ref_Type **) ptr;
-
-   if (ref == NULL)
-     return SLang_push_null ();
-
-   return _SLang_push_ref (ref->is_global, (VOID_STAR) ref->v.nt);
-}
-
-int SLang_assign_to_ref (SLang_Ref_Type *ref, unsigned char type, VOID_STAR v)
-{
-   SLang_Object_Type *stkptr;
-   SLang_Class_Type *cl;
-   
-   cl = _SLclass_get_class (type);
-
-   /* Use apush since this function is passing ``array'' bytes rather than the
-    * address of the data.  I need to somehow make this more consistent.  To
-    * see what I mean, consider:
-    * 
-    *    double z[2];
-    *    char *s = "silly";
-    *    int i;
-    * 
-    *    SLang_assign_to_ref (ref, SLANG_INT_TYPE,    &i);
-    *    SLang_assign_to_ref (ref, SLANG_STRING_TYPE, &s);
-    *    SLang_assign_to_ref (ref, SLANG_COMPLEX_TYPE, z);
-    * 
-    * That is, all external routines that take a VOID_STAR argument need to
-    * be documented such that how the function should be called with the
-    * various class_types.
-    */
-   if (-1 == (*cl->cl_apush) (type, v))
-     return -1;
-
-   stkptr = _SLStack_Pointer;
-   if (0 == _SLang_deref_assign (ref))
-     return 0;
-
-   if (stkptr != _SLStack_Pointer)
-     SLdo_pop ();
-
-   return -1;
-}
-
-static char *ref_string (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Ref_Type *ref;
-
-   (void) type;
-   ref = *(SLang_Ref_Type **) ptr;
-   if (ref->is_global)
-     {
-	char *name, *s;
-
-	name = ref->v.nt->name;
-	if ((name != NULL)
-	    && (NULL != (s = SLmalloc (strlen(name) + 2))))
-	  {
-	     *s = '&';
-	     strcpy (s + 1, name);
-	     return s;
-	  }
-	
-	return NULL;
-     }
-   return SLmake_string ("Local Variable Reference");
-}
-
-static int ref_dereference (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   return _SLang_dereference_ref (*(SLang_Ref_Type **) ptr);
-}
-
-static int ref_cmp (unsigned char type, VOID_STAR a, VOID_STAR b, int *c)
-{
-   SLang_Ref_Type *ra, *rb;
-
-   (void) type;
-   
-   ra = *(SLang_Ref_Type **)a;
-   rb = *(SLang_Ref_Type **)b;
-   
-   if (ra == NULL)
-     {
-	if (rb == NULL) *c = 0;
-	else *c = -1;
-	return 0;
-     }
-   if (rb == NULL)
-     {
-	*c = 1;
-	return 0;
-     }
-	
-   if (ra->v.nt == rb->v.nt)
-     *c = 0;
-   else *c = strcmp (ra->v.nt->name, rb->v.nt->name);
-   return 0;
-}
-
-   
-SLang_Name_Type *SLang_pop_function (void)
-{
-   SLang_Ref_Type *ref;
-   SLang_Name_Type *f;
-
-   if (SLang_peek_at_stack () == SLANG_STRING_TYPE)
-     {
-	char *name;
-	
-	if (-1 == SLang_pop_slstring (&name))
-	  return NULL;
-	
-	if (NULL == (f = SLang_get_function (name)))
-	  {
-	     SLang_verror (SL_UNDEFINED_NAME, "Function %s does not exist", name);
-	     SLang_free_slstring (name);
-	     return NULL;
-	  }
-	SLang_free_slstring (name);
-	return f;
-     }
-
-   if (-1 == SLang_pop_ref (&ref))
-     return NULL;
-
-   f = SLang_get_fun_from_ref (ref);
-   SLang_free_ref (ref);
-   return f;
-}
-
-/* This is a placeholder for version 2 */
-void SLang_free_function (SLang_Name_Type *f)
-{
-   (void) f;
-}
-
-/* NULL type */
-int SLang_push_null (void)
-{
-   return SLclass_push_ptr_obj (SLANG_NULL_TYPE, NULL);
-}
-
-int SLang_pop_null (void)
-{
-   SLang_Object_Type obj;
-   return _SLang_pop_object_of_type (SLANG_NULL_TYPE, &obj, 0);
-}
-
-static int null_push (unsigned char unused, VOID_STAR ptr_unused)
-{
-   (void) unused; (void) ptr_unused;
-   return SLang_push_null ();
-}
-
-static int null_pop (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-
-   if (-1 == SLang_pop_null ())
-     return -1;
-
-   *(char **) ptr = NULL;
-   return 0;
-}
-
-/* Implement foreach (NULL) using (whatever) to do nothing.  This is useful
- * because suppose that X is a list but is NULL in some situations.  Then
- * when it is NULL, we want foreach(X) to do nothing.
- */
-static SLang_Foreach_Context_Type *
-null_foreach_open (unsigned char type, unsigned int num)
-{
-   (void) type;
-   SLdo_pop_n (num + 1);
-   return (SLang_Foreach_Context_Type *)1;
-}
-
-static void null_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   (void) type;
-   (void) c;
-}
-
-static int null_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   (void) type;
-   (void) c;
-   return 0;
-}
-
-static int null_to_bool (unsigned char type, int *t)
-{
-   (void) type;
-   *t = 0;
-   return SLang_pop_null ();
-}
-
-/* AnyType */
-int _SLanytype_typecast (unsigned char a_type, VOID_STAR ap, unsigned int na,
-			 unsigned char b_type, VOID_STAR bp)
-{
-   SLang_Class_Type *cl;
-   SLang_Any_Type **any;
-   unsigned int i;
-   unsigned int sizeof_type;
-
-   (void) b_type;
-
-   any = (SLang_Any_Type **) bp;
-   
-   cl = _SLclass_get_class (a_type);
-   sizeof_type = cl->cl_sizeof_type;
-
-   for (i = 0; i < na; i++)
-     {
-	if ((-1 == (*cl->cl_apush) (a_type, ap))
-	    || (-1 == SLang_pop_anytype (&any[i])))
-	  {
-	     while (i != 0)
-	       {
-		  i--;
-		  SLang_free_anytype (any[i]);
-		  any[i] = NULL;
-	       }
-	     return -1;
-	  }
-	ap = (VOID_STAR)((char *)ap + sizeof_type);
-     }
-
-   return 1;
-}
-
-int SLang_pop_anytype (SLang_Any_Type **any)
-{
-   SLang_Object_Type *obj;
-
-   *any = NULL;
-
-   if (NULL == (obj = (SLang_Object_Type *) SLmalloc (sizeof (SLang_Object_Type))))
-     return -1;
-
-   if (-1 == SLang_pop (obj))
-     {
-	SLfree ((char *) obj);
-	return -1;
-     }
-   *any = (SLang_Any_Type *)obj;
-   return 0;
-}
-
-/* This function will result in an object that is represented by the
- * anytype object.
- */
-int SLang_push_anytype (SLang_Any_Type *any)
-{
-   return _SLpush_slang_obj ((SLang_Object_Type *)any);
-}
-
-/* After this call, the stack will contain an Any_Type object */
-static int anytype_push (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Any_Type *obj;
-
-   /* Push the object onto the stack, then pop it back off into our anytype
-    * container.  That way, any memory managing associated with the type
-    * will be performed automatically.  Another way to think of it is that
-    * pushing an Any_Type onto the stack will create another copy of the
-    * object represented by it.
-    */
-   if (-1 == _SLpush_slang_obj (*(SLang_Object_Type **)ptr))
-     return -1;
-
-   if (-1 == SLang_pop_anytype (&obj))
-     return -1;
-
-   /* There is no need to reference count the anytype objects since every
-    * push results in a new anytype container.
-    */
-   if (-1 == SLclass_push_ptr_obj (type, (VOID_STAR) obj))
-     {
-	SLang_free_anytype (obj);
-	return -1;
-     }
-
-   return 0;
-}
-
-static void anytype_destroy (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Object_Type *obj;
-
-   (void) type;
-   obj = *(SLang_Object_Type **)ptr;
-   SLang_free_object (obj);
-   SLfree ((char *) obj);
-}
-
-void SLang_free_anytype (SLang_Any_Type *any)
-{
-   if (any != NULL)
-     anytype_destroy (SLANG_ANY_TYPE, (VOID_STAR) &any);
-}
-
-static int anytype_dereference (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   return _SLpush_slang_obj (*(SLang_Object_Type **) ptr);
-}
-
-/* SLANG_INTP_TYPE */
-static int intp_push (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   return SLclass_push_int_obj (SLANG_INT_TYPE, **(int **)ptr);
-}
-
-static int intp_pop (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   return SLang_pop_integer (*(int **) ptr);
-}
-
-static int undefined_push (unsigned char t, VOID_STAR p)
-{
-   (void) t; (void) p;
-   if (SLang_Error == 0)
-     SLang_Error = SL_VARIABLE_UNINITIALIZED;
-   return -1;
-}
-
-int _SLregister_types (void)
-{
-   SLang_Class_Type *cl;
-
-   /* A good compiler should optimize this code away. */
-   if ((sizeof(short) != SIZEOF_SHORT)
-       || (sizeof(int) != SIZEOF_INT)
-       || (sizeof(long) != SIZEOF_LONG)
-       || (sizeof(float) != SIZEOF_FLOAT)
-       || (sizeof(double) != SIZEOF_DOUBLE))
-     SLang_exit_error ("S-Lang Library not built properly.  Fix SIZEOF_* in config.h and recompile");
-
-   if (-1 == _SLclass_init ())
-     return -1;
-
-   /* Undefined Type */
-   if (NULL == (cl = SLclass_allocate_class ("Undefined_Type")))
-     return -1;
-   (void) SLclass_set_push_function (cl, undefined_push);
-   (void) SLclass_set_pop_function (cl, undefined_push);
-   if (-1 == SLclass_register_class (cl, SLANG_UNDEFINED_TYPE, sizeof (int),
-				     SLANG_CLASS_TYPE_SCALAR))
-     return -1;
-   /* Make Void_Type a synonym for Undefined_Type.  Note that this does 
-    * not mean that Void_Type represents SLANG_VOID_TYPE.  Void_Type is 
-    * used by array_map to indicate no array is to be created.
-    */
-   if (-1 == SLclass_create_synonym ("Void_Type", SLANG_UNDEFINED_TYPE))
-     return -1;
-
-   if (-1 == _SLarith_register_types ())
-     return -1;
-
-   /* SLANG_INTP_TYPE */
-   if (NULL == (cl = SLclass_allocate_class ("_IntegerP_Type")))
-     return -1;
-   (void) SLclass_set_push_function (cl, intp_push);
-   (void) SLclass_set_pop_function (cl, intp_pop);
-   if (-1 == SLclass_register_class (cl, SLANG_INTP_TYPE, sizeof (int),
-				     SLANG_CLASS_TYPE_SCALAR))
-     return -1;
-
-   /* String Type */
-
-   if (NULL == (cl = SLclass_allocate_class ("String_Type")))
-     return -1;
-   (void) SLclass_set_destroy_function (cl, string_destroy);
-   (void) SLclass_set_push_function (cl, string_push);
-   cl->cl_foreach_open = string_foreach_open;
-   cl->cl_foreach_close = string_foreach_close;
-   cl->cl_foreach = string_foreach;
-   cl->cl_cmp = string_cmp;
-   if (-1 == SLclass_register_class (cl, SLANG_STRING_TYPE, sizeof (char *),
-				     SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   /* ref Type */
-   if (NULL == (cl = SLclass_allocate_class ("Ref_Type")))
-     return -1;
-   cl->cl_dereference = ref_dereference;
-   cl->cl_push = ref_push;
-   cl->cl_destroy = ref_destroy;
-   cl->cl_string = ref_string;
-   cl->cl_cmp = ref_cmp;
-   if (-1 == SLclass_register_class (cl, SLANG_REF_TYPE,
-				     sizeof (SLang_Ref_Type *),
-				     SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   /* NULL Type */
-
-   if (NULL == (cl = SLclass_allocate_class ("Null_Type")))
-     return -1;
-   cl->cl_push = null_push;
-   cl->cl_pop = null_pop;
-   cl->cl_foreach_open = null_foreach_open;
-   cl->cl_foreach_close = null_foreach_close;
-   cl->cl_foreach = null_foreach;
-   cl->cl_to_bool = null_to_bool;
-   if (-1 == SLclass_register_class (cl, SLANG_NULL_TYPE, sizeof (char *),
-				     SLANG_CLASS_TYPE_SCALAR))
-     return -1;
-
-   /* AnyType */
-   if (NULL == (cl = SLclass_allocate_class ("Any_Type")))
-     return -1;
-   (void) SLclass_set_push_function (cl, anytype_push);
-   (void) SLclass_set_destroy_function (cl, anytype_destroy);
-   cl->cl_dereference = anytype_dereference;
-   if (-1 == SLclass_register_class (cl, SLANG_ANY_TYPE, sizeof (VOID_STAR),
-				     SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   if (-1 == _SLang_init_bstring ())
-     return -1;
-
-   if ((-1 == SLclass_add_typecast (SLANG_STRING_TYPE, SLANG_INT_TYPE, string_to_int, 0))
-       || (-1 == SLclass_add_binary_op (SLANG_STRING_TYPE, SLANG_STRING_TYPE, string_string_bin_op, string_string_bin_op_result)))
-     return -1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slutty.c b/mdk-stage1/slang/slutty.c
deleted file mode 100644
index 636c1bb90..000000000
--- a/mdk-stage1/slang/slutty.c
+++ /dev/null
@@ -1,596 +0,0 @@
-/* slutty.c --- Unix Low level terminal (tty) functions for S-Lang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include <signal.h>
-/* sequent support thanks to Kenneth Lorber <keni@oasys.dt.navy.mil> */
-/* SYSV (SYSV ISC R3.2 v3.0) provided by iain.lea@erlm.siemens.de */
-
-#if defined (_AIX) && !defined (_ALL_SOURCE)
-# define _ALL_SOURCE	/* so NBBY is defined in <sys/types.h> */
-#endif
-
-#include <sys/time.h>
-#include <sys/types.h>
-
-#ifdef SYSV
-# include <fcntl.h>
-# ifndef CRAY
-#  include <sys/termio.h>
-#  include <sys/stream.h>
-#  include <sys/ptem.h>
-#  include <sys/tty.h>
-# endif
-#endif
-
-#ifdef __BEOS__
-/* Prototype for select */
-# include <net/socket.h>
-#endif
-
-#include <sys/file.h>
-
-#ifndef sun
-# include <sys/ioctl.h>
-#endif
-
-#ifdef __QNX__
-# include <sys/select.h>
-#endif
-
-#include <sys/stat.h>
-#include <errno.h>
-
-#if defined (_AIX) && !defined (FD_SET)
-# include <sys/select.h>	/* for FD_ISSET, FD_SET, FD_ZERO */
-#endif
-
-#ifndef O_RDWR
-# include <fcntl.h>
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-int SLang_TT_Read_FD = -1;
-int SLang_TT_Baud_Rate;
-
-#ifdef HAVE_TERMIOS_H
-# if !defined(HAVE_TCGETATTR) || !defined(HAVE_TCSETATTR)
-#   undef HAVE_TERMIOS_H
-# endif
-#endif
-
-#ifndef HAVE_TERMIOS_H
-
-# if !defined(CBREAK) && defined(sun)
-#  ifndef BSD_COMP
-#   define BSD_COMP 1
-#  endif
-#  include <sys/ioctl.h>
-# endif
-
-typedef struct
-  {
-      struct tchars t;
-      struct ltchars lt;
-      struct sgttyb s;
-  }
-TTY_Termio_Type;
-#else
-# include <termios.h>
-typedef struct termios TTY_Termio_Type;
-#endif
-
-static TTY_Termio_Type Old_TTY;
-
-#ifdef HAVE_TERMIOS_H
-typedef struct
-{
-   unsigned int key;
-   unsigned int value;
-} Baud_Rate_Type;
-
-static Baud_Rate_Type Baud_Rates [] =
-{
-#ifdef B0
-     {B0, 0},
-#endif
-#ifdef B50
-     {B50, 50},
-#endif
-#ifdef B75
-     {B75, 75},
-#endif
-#ifdef B110
-     {B110, 110},
-#endif
-#ifdef B134
-     {B134, 134},
-#endif
-#ifdef B150
-     {B150, 150},
-#endif
-#ifdef B200
-     {B200, 200},
-#endif
-#ifdef B300
-     {B300, 300},
-#endif
-#ifdef B600
-     {B600, 600},
-#endif
-#ifdef B1200
-     {B1200, 1200},
-#endif
-#ifdef B1800
-     {B1800, 1800},
-#endif
-#ifdef B2400
-     {B2400, 2400},
-#endif
-#ifdef B4800
-     {B4800, 4800},
-#endif
-#ifdef B9600
-     {B9600, 9600},
-#endif
-#ifdef B19200
-     {B19200, 19200},
-#endif
-#ifdef B38400
-     {B38400, 38400},
-#endif
-#ifdef B57600
-     {B57600, 57600},
-#endif
-#ifdef B115200
-     {B115200, 115200},
-#endif
-#ifdef B230400
-     {B230400, 230400},
-#endif
-     {0, 0}
-};
-
-static void
-set_baud_rate (TTY_Termio_Type *tty)
-{
-#ifdef HAVE_CFGETOSPEED
-   unsigned int speed;
-   Baud_Rate_Type *b, *bmax;
-
-   if (SLang_TT_Baud_Rate)
-     return;			       /* already set */
-
-   speed = (unsigned int) cfgetospeed (tty);
-
-   b = Baud_Rates;
-   bmax = b + (sizeof (Baud_Rates)/sizeof(Baud_Rates[0]));
-   while (b < bmax)
-     {
-	if (b->key == speed)
-	  {
-	     SLang_TT_Baud_Rate = b->value;
-	     return;
-	  }
-	b++;
-     }
-#else
-   (void) tty;
-#endif
-}
-
-#endif				       /* HAVE_TERMIOS_H */
-
-#ifdef HAVE_TERMIOS_H
-# define GET_TERMIOS(fd, x) tcgetattr(fd, x)
-# define SET_TERMIOS(fd, x) tcsetattr(fd, TCSADRAIN, x)
-#else
-# ifdef TCGETS
-#  define GET_TERMIOS(fd, x) ioctl(fd, TCGETS, x)
-#  define SET_TERMIOS(fd, x) ioctl(fd, TCSETS, x)
-# else
-#  define X(x,m)  &(((TTY_Termio_Type *)(x))->m)
-#  define GET_TERMIOS(fd, x)	\
-    ((ioctl(fd, TIOCGETC, X(x,t)) || \
-      ioctl(fd, TIOCGLTC, X(x,lt)) || \
-      ioctl(fd, TIOCGETP, X(x,s))) ? -1 : 0)
-#  define SET_TERMIOS(fd, x)	\
-    ((ioctl(fd, TIOCSETC, X(x,t)) ||\
-      ioctl(fd, TIOCSLTC, X(x,lt)) || \
-      ioctl(fd, TIOCSETP, X(x,s))) ? -1 : 0)
-# endif
-#endif
-
-static int TTY_Inited = 0;
-static int TTY_Open = 0;
-
-#ifdef ultrix   /* Ultrix gets _POSIX_VDISABLE wrong! */
-# define NULL_VALUE -1
-#else
-# ifdef _POSIX_VDISABLE
-#  define NULL_VALUE _POSIX_VDISABLE
-# else
-#  define NULL_VALUE 255
-# endif
-#endif
-
-int SLang_init_tty (int abort_char, int no_flow_control, int opost)
-{
-   TTY_Termio_Type newtty;
-
-   SLsig_block_signals ();
-
-   if (TTY_Inited)
-     {
-	SLsig_unblock_signals ();
-	return 0;
-     }
-
-   TTY_Open = 0;
-
-   if ((SLang_TT_Read_FD == -1)
-       || (1 != isatty (SLang_TT_Read_FD)))
-     {
-#ifdef O_RDWR
-# ifndef __BEOS__  /* I have been told that BEOS will HANG if passed /dev/tty */
-	if ((SLang_TT_Read_FD = open("/dev/tty", O_RDWR)) >= 0)
-	  {
-	     TTY_Open = 1;
-	  }
-# endif
-#endif
-	if (TTY_Open == 0)
-	  {
-	     SLang_TT_Read_FD = fileno (stderr);
-	     if (1 != isatty (SLang_TT_Read_FD))
-	       {
-		  SLang_TT_Read_FD = fileno (stdin);
-		  if (1 != isatty (SLang_TT_Read_FD))
-		    {
-		       fprintf (stderr, "Failed to open terminal.");
-		       return -1;
-		    }
-	       }
-	  }
-     }
-
-   SLang_Abort_Char = abort_char;
-
-   /* Some systems may not permit signals to be blocked.  As a result, the
-    * return code must be checked.
-    */
-   while (-1 == GET_TERMIOS(SLang_TT_Read_FD, &Old_TTY))
-     {
-	if (errno != EINTR)
-	  {
-	     SLsig_unblock_signals ();
-	     return -1;
-	  }
-     }
-
-   while (-1 == GET_TERMIOS(SLang_TT_Read_FD, &newtty))
-     {
-	if (errno != EINTR)
-	  {
-	     SLsig_unblock_signals ();
-	     return -1;
-	  }
-     }
-
-#ifndef HAVE_TERMIOS_H
-   newtty.s.sg_flags &= ~(ECHO);
-   newtty.s.sg_flags &= ~(CRMOD);
-   /*   if (Flow_Control == 0) newtty.s.sg_flags &= ~IXON; */
-   newtty.t.t_eofc = 1;
-   if (abort_char == -1) SLang_Abort_Char = newtty.t.t_intrc;
-   newtty.t.t_intrc = SLang_Abort_Char;	/* ^G */
-   newtty.t.t_quitc = 255;
-   newtty.lt.t_suspc = 255;   /* to ignore ^Z */
-   newtty.lt.t_dsuspc = 255;    /* to ignore ^Y */
-   newtty.lt.t_lnextc = 255;
-   newtty.s.sg_flags |= CBREAK;		/* do I want cbreak or raw????? */
-#else
-
-   /* get baud rate */
-
-   newtty.c_iflag &= ~(ECHO | INLCR | ICRNL);
-#ifdef ISTRIP
-   /* newtty.c_iflag &= ~ISTRIP; */
-#endif
-   if (opost == 0) newtty.c_oflag &= ~OPOST;
-
-   set_baud_rate (&newtty);
-
-   if (no_flow_control) newtty.c_iflag &= ~IXON; else newtty.c_iflag |= IXON;
-
-   newtty.c_cc[VEOF] = 1;
-   newtty.c_cc[VMIN] = 1;
-   newtty.c_cc[VTIME] = 0;
-   newtty.c_lflag = ISIG | NOFLSH;
-   if (abort_char == -1) SLang_Abort_Char = newtty.c_cc[VINTR];
-   newtty.c_cc[VINTR] = SLang_Abort_Char;   /* ^G */
-   newtty.c_cc[VQUIT] = NULL_VALUE;
-   newtty.c_cc[VSUSP] = NULL_VALUE;   /* to ignore ^Z */
-#ifdef VDSUSP
-   newtty.c_cc[VDSUSP] = NULL_VALUE;   /* to ignore ^Y */
-#endif
-#ifdef VLNEXT
-   newtty.c_cc[VLNEXT] = NULL_VALUE;   /* to ignore ^V ? */
-#endif
-#ifdef VSWTCH
-   newtty.c_cc[VSWTCH] = NULL_VALUE;   /* to ignore who knows what */
-#endif
-#endif /* NOT HAVE_TERMIOS_H */
-
-   while (-1 == SET_TERMIOS(SLang_TT_Read_FD, &newtty))
-     {
-	if (errno != EINTR)
-	  {
-	     SLsig_unblock_signals ();
-	     return -1;
-	  }
-     }
-
-   TTY_Inited = 1;
-   SLsig_unblock_signals ();
-   return 0;
-}
-
-void SLtty_set_suspend_state (int mode)
-{
-   TTY_Termio_Type newtty;
-
-   SLsig_block_signals ();
-
-   if (TTY_Inited == 0)
-     {
-	SLsig_unblock_signals ();
-	return;
-     }
-
-   while ((-1 == GET_TERMIOS (SLang_TT_Read_FD, &newtty))
-	  && (errno == EINTR))
-     ;
-
-#ifndef HAVE_TERMIOS_H
-   /* I do not know if all systems define the t_dsuspc field */
-   if (mode == 0)
-     {
-	newtty.lt.t_suspc = 255;
-	newtty.lt.t_dsuspc = 255;
-     }
-   else
-     {
-	newtty.lt.t_suspc = Old_TTY.lt.t_suspc;
-	newtty.lt.t_dsuspc = Old_TTY.lt.t_dsuspc;
-     }
-#else
-   if (mode == 0)
-     {
-	newtty.c_cc[VSUSP] = NULL_VALUE;
-#ifdef VDSUSP
-	newtty.c_cc[VDSUSP] = NULL_VALUE;
-#endif
-     }
-   else
-     {
-	newtty.c_cc[VSUSP] = Old_TTY.c_cc[VSUSP];
-#ifdef VDSUSP
-	newtty.c_cc[VDSUSP] = Old_TTY.c_cc[VDSUSP];
-#endif
-     }
-#endif
-
-   while ((-1 == SET_TERMIOS (SLang_TT_Read_FD, &newtty))
-	  && (errno == EINTR))
-     ;
-
-   SLsig_unblock_signals ();
-}
-
-void SLang_reset_tty (void)
-{
-   SLsig_block_signals ();
-
-   if (TTY_Inited == 0)
-     {
-	SLsig_unblock_signals ();
-	return;
-     }
-
-   while ((-1 == SET_TERMIOS(SLang_TT_Read_FD, &Old_TTY))
-	  && (errno == EINTR))
-     ;
-
-   if (TTY_Open)
-     {
-	while ((-1 == close (SLang_TT_Read_FD))
-	       && (errno == EINTR))
-	  ;
-
-	TTY_Open = 0;
-	SLang_TT_Read_FD = -1;
-     }
-
-   TTY_Inited = 0;
-   SLsig_unblock_signals ();
-}
-
-static void default_sigint (int sig)
-{
-   sig = errno;			       /* use parameter */
-
-   SLKeyBoard_Quit = 1;
-   if (SLang_Ignore_User_Abort == 0) SLang_Error = SL_USER_BREAK;
-   SLsignal_intr (SIGINT, default_sigint);
-   errno = sig;
-}
-
-int SLang_set_abort_signal (void (*hand)(int))
-{
-   int save_errno = errno;
-   SLSig_Fun_Type *f;
-
-   if (hand == NULL) hand = default_sigint;
-   f = SLsignal_intr (SIGINT, hand);
-
-   errno = save_errno;
-
-   if (f == (SLSig_Fun_Type *) SIG_ERR)
-     return -1;
-
-   return 0;
-}
-
-#ifndef FD_SET
-#define FD_SET(fd, tthis) *(tthis) = 1 << (fd)
-#define FD_ZERO(tthis)    *(tthis) = 0
-#define FD_ISSET(fd, tthis) (*(tthis) & (1 << fd))
-typedef int fd_set;
-#endif
-
-static fd_set Read_FD_Set;
-
-/* HACK: If > 0, use 1/10 seconds.  If < 0, use 1/1000 seconds */
-
-int _SLsys_input_pending(int tsecs)
-{
-   struct timeval wait;
-   long usecs, secs;
-
-   if (TTY_Inited == 0) return -1;
-
-   if (tsecs >= 0)
-     {
-	secs = tsecs / 10;
-	usecs = (tsecs % 10) * 100000;
-     }
-   else
-     {
-	tsecs = -tsecs;
-	secs = tsecs / 1000;
-	usecs = (tsecs % 1000) * 1000;
-     }
-
-   wait.tv_sec = secs;
-   wait.tv_usec = usecs;
-
-   FD_ZERO(&Read_FD_Set);
-   FD_SET(SLang_TT_Read_FD, &Read_FD_Set);
-
-   return select(SLang_TT_Read_FD + 1, &Read_FD_Set, NULL, NULL, &wait);
-}
-
-int (*SLang_getkey_intr_hook) (void);
-
-static int handle_interrupt (void)
-{
-   if (SLang_getkey_intr_hook != NULL)
-     {
-	int save_tty_fd = SLang_TT_Read_FD;
-
-	if (-1 == (*SLang_getkey_intr_hook) ())
-	  return -1;
-
-	if (save_tty_fd != SLang_TT_Read_FD)
-	  return -1;
-     }
-
-   return 0;
-}
-
-unsigned int _SLsys_getkey (void)
-{
-   unsigned char c;
-
-   if (TTY_Inited == 0)
-     {
-	int ic = fgetc (stdin);
-	if (ic == EOF) return SLANG_GETKEY_ERROR;
-	return (unsigned int) ic;
-     }
-
-   while (1)
-     {
-	int ret;
-
-	if (SLKeyBoard_Quit)
-	  return SLang_Abort_Char;
-
-	if (0 == (ret = _SLsys_input_pending (100)))
-	  continue;
-
-	if (ret != -1)
-	  break;
-
-	if (SLKeyBoard_Quit)
-	  return SLang_Abort_Char;
-
-	if (errno == EINTR)
-	  {
-	     if (-1 == handle_interrupt ())
-	       return SLANG_GETKEY_ERROR;
-
-	     continue;
-	  }
-
-	break;			       /* let read handle it */
-     }
-
-   while (1)
-     {
-	int status = read(SLang_TT_Read_FD, (char *) &c, 1);
-
-	if (status > 0)
-	  break;
-
-	if (status == 0)
-	  {
-	     /* We are at the end of a file.  Let application handle it. */
-	     return SLANG_GETKEY_ERROR;
-	  }
-
-	if (errno == EINTR)
-	  {
-	     if (-1 == handle_interrupt ())
-	       return SLANG_GETKEY_ERROR;
-
-	     if (SLKeyBoard_Quit)
-	       return SLang_Abort_Char;
-
-	     continue;
-	  }
-#ifdef EAGAIN
-	if (errno == EAGAIN)
-	  {
-	     sleep (1);
-	     continue;
-	  }
-#endif
-#ifdef EWOULDBLOCK
-	if (errno == EWOULDBLOCK)
-	  {
-	     sleep (1);
-	     continue;
-	  }
-#endif
-#ifdef EIO
-	if (errno == EIO)
-	  {
-	     SLang_exit_error ("_SLsys_getkey: EIO error.");
-	  }
-#endif
-	return SLANG_GETKEY_ERROR;
-     }
-
-   return((unsigned int) c);
-}
-
diff --git a/mdk-stage1/slang/slxstrng.c b/mdk-stage1/slang/slxstrng.c
deleted file mode 100644
index 3f8a4dffa..000000000
--- a/mdk-stage1/slang/slxstrng.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* These routines are simple and inefficient.  They were designed to work on
- * SunOS when using Electric Fence.
- */
-
-#include "slang.h"
-#include "_slang.h"
-char *SLstrcpy(register char *aa, register char *b)
-{
-   char *a = aa;
-   while ((*a++ = *b++) != 0);
-   return aa;
-}
-
-int SLstrcmp(register char *a, register char *b)
-{
-   while (*a && (*a == *b))
-     {
-	a++;
-	b++;
-     }
-   if (*a) return((unsigned char) *a - (unsigned char) *b);
-   else if (*b) return ((unsigned char) *a - (unsigned char) *b);
-   else return 0;
-}
-
-char *SLstrncpy(char *a, register char *b,register  int n)
-{
-   register char *aa = a;
-   while ((n > 0) && *b)
-     {
-	*aa++ = *b++;
-	n--;
-     }
-   while (n-- > 0) *aa++ = 0;
-   return (a);
-}
diff --git a/mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2 b/mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2
deleted file mode 100644
index 337b13666..000000000
--- a/mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2
+++ /dev/null
diff --git a/mdk-stage1/stage1-data/stage1-with-sash.tar.bz2 b/mdk-stage1/stage1-data/stage1-with-sash.tar.bz2
deleted file mode 100644
index 56279ae90..000000000
--- a/mdk-stage1/stage1-data/stage1-with-sash.tar.bz2
+++ /dev/null
diff --git a/mdk-stage1/stage1-data/stage1.tar.bz2 b/mdk-stage1/stage1-data/stage1.tar.bz2
deleted file mode 100644
index 98e62b362..000000000
--- a/mdk-stage1/stage1-data/stage1.tar.bz2
+++ /dev/null
diff --git a/mdk-stage1/stage1.c b/mdk-stage1/stage1.c
deleted file mode 100644
index b70cf33a3..000000000
--- a/mdk-stage1/stage1.c
+++ /dev/null
@@ -1,467 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000-2001 MandrakeSoft
- *
- * View the homepage: http://people.mandrakesoft.com/~gc/html/stage1.html
- *
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <sys/ioctl.h>
-#include <sys/mount.h>
-#include <string.h>
-#include <errno.h>
-#include <ctype.h>
-#include <stdarg.h>
-#include <signal.h>
-
-#include "stage1.h"
-
-#include "log.h"
-#include "probing.h"
-#include "frontend.h"
-#include "modules.h"
-#include "tools.h"
-#include "automatic.h"
-#include "mount.h"
-#include "insmod.h"
-
-#ifdef ENABLE_PCMCIA
-#include "pcmcia_/pcmcia.h"
-#endif
-
-#ifndef DISABLE_CDROM
-#include "cdrom.h"
-#endif
-
-#ifndef DISABLE_NETWORK
-#include "network.h"
-#endif
-
-#ifndef DISABLE_DISK
-#include "disk.h"
-#endif
-
-
-/************************************************************
- * globals */
-
-char * method_name;
-char * stage2_kickstart = NULL;
-
-
-void fatal_error(char *msg)
-{
-	printf("FATAL ERROR IN STAGE1: %s\n\nI can't recover from this.\nYou may reboot your system.\n", msg);
-	while (1);
-}
-
-
-/************************************************************
- * special frontend functs
- * (the principle is to not pollute frontend code with stage1-specific stuff) */
-
-void stg1_error_message(char *msg, ...)
-{
-	va_list args;
-	va_start(args, msg);
-	log_message("unsetting automatic");
-	unset_param(MODE_AUTOMATIC);
-	verror_message(msg, args);
-	va_end(args);
-}
-
-void stg1_info_message(char *msg, ...)
-{
-	va_list args;
-	va_start(args, msg);
-	if (IS_AUTOMATIC) {
-		vlog_message(msg, args);
-		return;
-	}
-	vinfo_message(msg, args);
-	va_end(args);
-}
-
-
-/************************************************************
- * spawns a shell on console #2 */
-static void spawn_shell(void)
-{
-#ifdef SPAWN_SHELL
-	int fd;
-	char * shell_name[] = { "/tmp/sh", NULL };
-
-	log_message("spawning a shell");
-
-	if (!IS_TESTING) {
-		fd = open("/dev/tty2", O_RDWR);
-		if (fd == -1) {
-			log_message("cannot open /dev/tty2 -- no shell will be provided");
-			return;
-		}
-		else if (access(shell_name[0], X_OK)) {
-			log_message("cannot open shell - %s doesn't exist", shell_name[0]);
-			return;
-		}
-		
-		if (!fork()) {
-			dup2(fd, 0);
-			dup2(fd, 1);
-			dup2(fd, 2);
-			
-			close(fd);
-			setsid();
-			if (ioctl(0, TIOCSCTTY, NULL))
-				log_perror("could not set new controlling tty");
-
-			execve(shell_name[0], shell_name, grab_env());
-			log_message("execve of %s failed: %s", shell_name[0], strerror(errno));
-			exit(-1);
-		}
-		
-		close(fd);
-	}
-#endif
-}
-
-
-char * interactive_fifo = "/tmp/stage1-fifo";
-static pid_t interactive_pid = 0;
-
-/* spawns my small interactive on console #6 */
-static void spawn_interactive(void)
-{
-#ifdef SPAWN_INTERACTIVE
-	int fd;
-	char * dev = "/dev/tty6";
-
-	printf("spawning my interactive on %s\n", dev);
-
-	if (!IS_TESTING) {
-		fd = open(dev, O_RDWR);
-		if (fd == -1) {
-			printf("cannot open %s -- no interactive\n", dev);
-			return;
-		}
-
-		if (mkfifo(interactive_fifo, O_RDWR)) {
-			printf("cannot create fifo -- no interactive\n");
-			return;
-		}
-		
-		if (!(interactive_pid = fork())) {
-			int fif_out;
-
-			dup2(fd, 0);
-			dup2(fd, 1);
-			dup2(fd, 2);
-			
-			close(fd);
-			setsid();
-			if (ioctl(0, TIOCSCTTY, NULL))
-				perror("could not set new controlling tty");
-
-			fif_out = open(interactive_fifo, O_WRONLY);
-			printf("Please enter your command (availables: [+,-] [rescue,expert]).\n");
-				
-			while (1) {
-				char s[50];
-				int i = 0;
-				printf("? ");
-				fflush(stdout);
-				read(0, &(s[i++]), 1);
-				fcntl(0, F_SETFL, O_NONBLOCK);
-				while (read(0, &(s[i++]), 1) > 0 && i < sizeof(s));
-				fcntl(0, F_SETFL, 0);
-				write(fif_out, s, i-2);
-				printf("Ok.\n");
-			}
-		}
-		
-		close(fd);
-	}
-#endif
-}
-
-
-/************************************************************
- */
-
-static void expert_third_party_modules(void)
-{
-	enum return_type results;
-	char * floppy_mount_location = "/tmp/floppy";
-	char ** modules;
-	char final_name[500];
-	char * choice;
-	int rc;
-	char * questions[] = { "Options", NULL };
-	static char ** answers = NULL;
-
-	results = ask_yes_no("If you want to insert third-party kernel modules, insert "
-			     "a Linux (ext2fs) formatted floppy containing the modules and confirm. Otherwise, select \"no\".");;
-	if (results != RETURN_OK)
-		return;
-
-	my_insmod("floppy", ANY_DRIVER_TYPE, NULL);
-
-	if (my_mount("/dev/fd0", floppy_mount_location, "ext2", 0) == -1) {
-		stg1_error_message("I can't find a Linux ext2 floppy in first floppy drive.");
-		return expert_third_party_modules();
-	}
-
-	modules = list_directory(floppy_mount_location);
-
-	if (!modules || !*modules) {
-		stg1_error_message("No modules found on floppy disk.");
-		umount(floppy_mount_location);
-		return expert_third_party_modules();
-	}
-
-	results = ask_from_list("Which driver would you like to insmod?", modules, &choice);
-	if (results != RETURN_OK) {
-		umount(floppy_mount_location);
-		return;
-	}
-
-	sprintf(final_name, "%s/%s", floppy_mount_location, choice);
-
-	results = ask_from_entries("Please enter the options:", questions, &answers, 24, NULL);
-	if (results != RETURN_OK) {
-		umount(floppy_mount_location);
-		return expert_third_party_modules();
-	}
-
-	rc = insmod_call(final_name, answers[0]);
-	umount(floppy_mount_location);
-
-	if (rc) {
-		log_message("\tfailed");
-		stg1_error_message("Insmod failed.");
-	}
-
-	return expert_third_party_modules();
-}
-
-
-#ifdef ENABLE_PCMCIA
-static void handle_pcmcia(char ** pcmcia_adapter)
-{
-	char buf[50];
-	int fd = open("/proc/version", O_RDONLY);
-	int size;
-	if (fd == -1) 
-		fatal_error("could not open /proc/version");
-	size = read(fd, buf, sizeof(buf));
-	buf[size-1] = '\0';   // -1 to eat the \n
-	close(fd);
-	buf[17] = '\0';       // enough to extract `2.2'
-	if (ptr_begins_static_str(buf+14, "2.2")) {
-		stg1_error_message("We now use kernel pcmcia support and this won't work with a 2.2 kernel.");
-		return;
-	}
-
-	*pcmcia_adapter = pcmcia_probe();
-	if (!*pcmcia_adapter) {
-		log_message("no pcmcia adapter found");
-		return;
-	}
-	my_insmod("pcmcia_core", ANY_DRIVER_TYPE, NULL);
-	my_insmod(*pcmcia_adapter, ANY_DRIVER_TYPE, NULL);
-	my_insmod("ds", ANY_DRIVER_TYPE, NULL);
-	
-        /* call to cardmgr takes time, let's use the wait message */
-	wait_message("Enabling PCMCIA extension cards...");
-	log_message("cardmgr rc: %d", cardmgr_call());
-	remove_wait_message();
-
-	if (IS_EXPERT)
-		expert_third_party_modules();
-}
-#endif
-
-
-/************************************************************
- */
-
-static enum return_type method_select_and_prepare(void)
-{
-	enum return_type results;
-	char * choice;
-	char * means[10], * means_auto[10];
-	int i;
-
-#ifndef DISABLE_DISK
-	char * disk_install = "Hard disk"; char * disk_install_auto = "disk";
-#endif
-#ifndef DISABLE_CDROM
-	char * cdrom_install = "CDROM drive"; char * cdrom_install_auto = "cdrom";
-#endif
-#ifndef DISABLE_NETWORK
-	char * network_nfs_install = "NFS server"; char * network_nfs_install_auto = "nfs";
-	char * network_ftp_install = "FTP server"; char * network_ftp_install_auto = "ftp";
-	char * network_http_install = "HTTP server"; char * network_http_install_auto = "http";
-#endif
-
-	i = 0;
-#ifndef DISABLE_NETWORK
-	means[i] = network_nfs_install; means_auto[i++] = network_nfs_install_auto;
-	means[i] = network_ftp_install; means_auto[i++] = network_ftp_install_auto;
-	means[i] = network_http_install; means_auto[i++] = network_http_install_auto;
-#endif
-#ifndef DISABLE_CDROM
-	means[i] = cdrom_install; means_auto[i++] = cdrom_install_auto;
-#endif
-#ifndef DISABLE_DISK
-	means[i] = disk_install; means_auto[i++] = disk_install_auto;
-#endif
-	means[i] = NULL;
-
-	results = ask_from_list_auto("Please choose the installation method.", means, &choice, "method", means_auto);
-
-	if (results != RETURN_OK)
-		return method_select_and_prepare();
-
-	results = RETURN_ERROR;
-
-#ifndef DISABLE_CDROM
-	if (!strcmp(choice, cdrom_install))
-		results = cdrom_prepare();
-#endif
-        
-#ifndef DISABLE_DISK
-	if (!strcmp(choice, disk_install))
-		results = disk_prepare();
-#endif
-	
-#ifndef DISABLE_NETWORK
-	if (!strcmp(choice, network_nfs_install))
-		results = nfs_prepare();
-	
-	if (!strcmp(choice, network_ftp_install))
-		results = ftp_prepare();
-	
-	if (!strcmp(choice, network_http_install))
-		results = http_prepare();
-#endif
-
-	if (results != RETURN_OK)
-		return method_select_and_prepare();
-
-	return RETURN_OK;
-}
-
-
-int main(int argc __attribute__ ((unused)), char **argv __attribute__ ((unused)), char **env)
-{
-	enum return_type ret;
-	char ** argptr;
-	char * stage2_args[30];
-#ifdef ENABLE_PCMCIA
-	char * pcmcia_adapter = NULL;
-#endif
-
-	if (getpid() > 50)
-		set_param(MODE_TESTING);
-
-	spawn_interactive();
-
-	open_log();
-	log_message("welcome to the " DISTRIB_NAME " install (mdk-stage1, version " VERSION " built " __DATE__ " " __TIME__")");
-	process_cmdline();
-	handle_env(env);
-	spawn_shell();
-	init_modules_insmoding();
-	init_frontend("Welcome to " DISTRIB_NAME " (" VERSION ") " __DATE__ " " __TIME__);
-
-	if (IS_EXPERT)
-		expert_third_party_modules();
-
-	if (IS_UPDATEMODULES)
-		update_modules();
-
-#ifdef ENABLE_PCMCIA
-	handle_pcmcia(&pcmcia_adapter);
-#endif
-
-	if (IS_CHANGEDISK)
-		stg1_info_message("You are starting the installation with an alternate booting method. "
-				  "Please change your disk, and insert the Installation disk.");
-
-	if (IS_RESCUE && total_memory() < MEM_LIMIT_RESCUE) {
-		stg1_error_message("You are starting the rescue with a low memory configuration. "
-				   "Our experience shows that your system may crash at any point "
-				   "or lock up for no apparent reason. Continue at "
-				   "your own risk. Alternatively, you may reboot your system now.");
-	}
-
-	ret = method_select_and_prepare();
-
-	finish_frontend();
-	close_log();
-
-	if (ret != RETURN_OK)
-		fatal_error("could not select an installation method");
-
-	if (!IS_RAMDISK) {
-		if (symlink(IMAGE_LOCATION LIVE_LOCATION, STAGE2_LOCATION) != 0) {
-			printf("symlink from " IMAGE_LOCATION LIVE_LOCATION " to " STAGE2_LOCATION " failed");
-			fatal_error(strerror(errno));
-		}
-	}
-
-	if (interactive_pid != 0)
-		kill(interactive_pid, 9);
-
-	if (IS_RESCUE)
-		return 66;
-	if (IS_TESTING)
-		return 0;
-
-	argptr = stage2_args;
-	*argptr++ = "/usr/bin/runinstall2";
-	*argptr++ = "--method";
-	*argptr++ = method_name;
-#ifdef ENABLE_PCMCIA
-	if (pcmcia_adapter) {
-		*argptr++ = "--pcmcia";
-		*argptr++ = pcmcia_adapter;
-	}
-#endif
-	if (disable_modules)
-		*argptr++ = "--blank";
-	if (stage2_kickstart) {
-		*argptr++ = "--kickstart";
-		*argptr++ = stage2_kickstart;
-	}
-	*argptr++ = NULL;
-
-	execve(stage2_args[0], stage2_args, grab_env());
-
-	printf("error in exec of stage2 :-(\n");
-	fatal_error(strerror(errno));
-	
-	return 0; /* shut up compiler (we can't get here anyway!) */
-}
diff --git a/mdk-stage1/stage1.h b/mdk-stage1/stage1.h
deleted file mode 100644
index f92c45c41..000000000
--- a/mdk-stage1/stage1.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _STAGE1_H_
-#define _STAGE1_H_
-
-#include "config-stage1.h"
-#include "tools.h"
-
-
-/* Some global stuff */
-
-extern char * method_name;
-extern char * interactive_fifo;
-extern char * stage2_kickstart;
-
-#define MODE_TESTING        (1 << 0)
-#define MODE_EXPERT         (1 << 1)
-#define MODE_RESCUE         (1 << 3)
-#define MODE_AUTOMATIC	    (1 << 4)
-#define MODE_SPECIAL_STAGE2 (1 << 8)
-#define MODE_RAMDISK        (1 << 9)
-#define MODE_CHANGEDISK     (1 << 10)
-#define MODE_UPDATEMODULES  (1 << 11)
-
-#define IS_TESTING     (get_param(MODE_TESTING))
-#define IS_EXPERT      (get_param(MODE_EXPERT))
-#define IS_RESCUE      (get_param(MODE_RESCUE))
-#define IS_AUTOMATIC   (get_param(MODE_AUTOMATIC))
-#define IS_SPECIAL_STAGE2 (get_param(MODE_SPECIAL_STAGE2))
-#define IS_RAMDISK     (get_param(MODE_RAMDISK))
-#define IS_CHANGEDISK  (get_param(MODE_CHANGEDISK))
-#define IS_UPDATEMODULES (get_param(MODE_UPDATEMODULES))
-
-void fatal_error(char *msg) __attribute__ ((noreturn));
-
-
-void stg1_error_message(char *msg, ...) __attribute__ ((format (printf, 1, 2)));
-void stg1_info_message(char *msg, ...) __attribute__ ((format (printf, 1, 2)));
-
-#endif
diff --git a/mdk-stage1/stdio-frontend.c b/mdk-stage1/stdio-frontend.c
deleted file mode 100644
index 83e8fd76d..000000000
--- a/mdk-stage1/stdio-frontend.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-
-/*
- * Each different frontend must implement all functions defined in frontend.h
- */
-
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <fcntl.h>
-#include <sys/ioctl.h>
-#include <termios.h>
-
-#include "frontend.h"
-
-
-void init_frontend(char * welcome_msg)
-{
-	printf(welcome_msg);
-	printf("\n");
-}
-
-
-void finish_frontend(void)
-{
-}
-
-static void get_any_response(void)
-{
-	unsigned char t;
-	printf("\n\t(press <enter> to proceed)");
-	fflush(stdout);
-	read(0, &t, 1);
-	fcntl(0, F_SETFL, O_NONBLOCK);
-	while (read(0, &t, 1) > 0);
-	fcntl(0, F_SETFL, 0);
-}
-	
-static int get_int_response(void)
-{
-	char s[50];
-	int j = 0, i = 0; /* (0) tied to Cancel */
-	fflush(stdout);
-	read(0, &(s[i++]), 1);
-	fcntl(0, F_SETFL, O_NONBLOCK);
-	do {
-		int v = s[i-1];
-		if (v >= '0' && v <= '9')
-			j = j*10 + (v - '0');
-	} while (read(0, &(s[i++]), 1) > 0 && i < sizeof(s));
-	fcntl(0, F_SETFL, 0);
-	return j;
-}
-
-static char * get_string_response(char * initial_string)
-{
-	/* I won't use a scanf/%s since I also want the null string to be accepted -- also, I want the initial_string */
-	char s[500];
-	int i = 0;
-	char buf[10];
-	int b_index = 0;
-	char b;
-
-	struct termios t;
-
-	memset(s, '\0', sizeof(s));
-
-	if (initial_string) {
-		printf(initial_string);
-		strcpy(s, initial_string);
-		i = strlen(s);
-	}
-	
-	/* from ncurses/tinfo/lib_raw.c:(cbreak) */
-	tcgetattr(0, &t);
-	t.c_lflag &= ~ICANON;
-	t.c_lflag |= ISIG;
-	t.c_lflag &= ~ECHO;
-	t.c_iflag &= ~ICRNL;
-	t.c_cc[VMIN] = 1;
-	t.c_cc[VTIME] = 0;
-	tcsetattr(0, TCSADRAIN, &t);
-
-	fflush(stdout);
-
-	fcntl(0, F_SETFL, O_NONBLOCK);
-
-	while (1) {
-		if (read(0, &b, 1) > 0) {
-			if (b_index == 1) {
-				if (b == 91) {
-					buf[b_index] = b;
-					b_index++;
-					continue;
-				}
-				else
-					b_index = 0;
-			}
-			if (b_index == 2) {
-				if (b == 67) {
-					if (s[i] != '\0') {
-						printf("\033[C");
-						i++;
-					}
-				}
-				if (b == 68) {
-					if (i > 0) {
-						printf("\033[D");
-						i--;
-					}
-				}
-				b_index = 0;
-				continue;
-			}
-				
-			if (b == 13)
-				break;
-			if (b == 127) {
-				if (i > 0) {
-					printf("\033[D");
-					printf(" ");
-					printf("\033[D");
-					if (s[i] == '\0')
-						s[i-1] = '\0';
-					else
-						s[i-1] = ' ';
-					i--;
-				}
-			} else if (b == 27) {
-				buf[b_index] = b;
-				b_index++;
-			} else {
-				printf("%c", b);
-				s[i] = b;
-				i++;
-			}
-		}
-	}
-
-	t.c_lflag |= ICANON;
-	t.c_lflag |= ECHO;
-	t.c_iflag |= ICRNL; 
-	tcsetattr(0, TCSADRAIN, &t);
-
-	fcntl(0, F_SETFL, 0);
-
-	printf("\n");
-	return strdup(s);
-}
-
-static void blocking_msg(char *type, char *fmt, va_list ap)
-{
-	printf(type);
-	vprintf(fmt, ap);
-	get_any_response();
-}
-
-void verror_message(char *msg, va_list ap)
-{
-	blocking_msg("> Error! ", msg, ap);
-}
-
-void vinfo_message(char *msg, va_list ap)
-{
-	blocking_msg("> Notice: ", msg, ap);
-}
-
-void vwait_message(char *msg, va_list ap)
-{
-	printf("Please wait: ");
-	vprintf(msg, ap);
-	fflush(stdout);
-}
-
-void remove_wait_message(void)
-{
-	printf("\n");
-}
-
-
-static int size_progress;
-static int actually_drawn;
-#define PROGRESS_SIZE 45
-void init_progression(char *msg, int size)
-{
-	int i;
-	size_progress = size;
-	printf("%s  ", msg);
-	if (size) {
-		actually_drawn = 0;
-		for (i=0; i<PROGRESS_SIZE; i++)
-			printf(".");
-		printf("]\033[G%s [", msg);		/* only works on ANSI-compatibles */
-		fflush(stdout);
-	} else
-		printf("\n");
-}
-
-void update_progression(int current_size)
-{
-	if (size_progress) {
-		if (current_size > size_progress)
-			current_size = size_progress;
-		while ((int)((current_size*PROGRESS_SIZE)/size_progress) > actually_drawn) {
-			printf("*");
-			actually_drawn++;
-		}
-	} else
-		printf("\033[GStatus: [%8d] bytes loaded...", current_size);
-	
-	fflush(stdout);
-}
-
-void end_progression(void)
-{
-	if (size_progress) {
-		update_progression(size_progress);
-		printf("]\n");
-	} else
-		printf(" done.\n");
-}
-
-
-enum return_type ask_from_list_comments(char *msg, char ** elems, char ** elems_comments, char ** choice)
-{
-	int justify_number = 1;
-	void print_choice_number(int i) {
-		char tmp[500];
-		snprintf(tmp, sizeof(tmp), "[%%%dd]", justify_number);
-		printf(tmp, i);
-	}
-	char ** sav_elems = elems;
-	int i = 1;
-	int j = 0;
-
-	while (elems && *elems) {
-		elems++;
-		i++;
-	}
-	if (i >= 10)
-		justify_number = 2;
-
-	elems = sav_elems;
-	i = 1;
-
-	printf("> %s\n", msg);
-	print_choice_number(0);
-	printf(" Cancel");
-
-	while (elems && *elems) {
-		if (elems_comments && *elems_comments) {
-			printf("\n");
-			print_choice_number(i);
-			printf(" %s (%s)", *elems, *elems_comments);
-			j = 0;
-		} else {
-			if (j == 0)
-				printf("\n");
-			print_choice_number(i);
-			printf(" %-14s ", *elems);
-			j++;
-		}
-		if (j == 4)
-			j = 0;
-		
-		if (elems_comments)
-			elems_comments++;
-		i++;
-		elems++;
-	}
-
-	printf("\n? "); 
-
-	j = get_int_response();
-
-	if (j == 0)
-		return RETURN_BACK;
-
-	if (j >= 1 && j <= i) {
-		*choice = strdup(sav_elems[j-1]);
-		return RETURN_OK;
-	}
-
-	return RETURN_ERROR;
-}
-
-
-enum return_type ask_from_list(char *msg, char ** elems, char ** choice)
-{
-	return ask_from_list_comments(msg, elems, NULL, choice);
-}
-
-
-enum return_type ask_yes_no(char *msg)
-{
-	int j;
-
-	printf("> %s\n[0] Yes  [1] No  [2] Back\n? ", msg);
-
-	j = get_int_response();
-
-	if (j == 0)
-		return RETURN_OK;
-	else if (j == 2)
-		return RETURN_BACK;
-	else return RETURN_ERROR;
-}
-
-
-enum return_type ask_from_entries(char *msg, char ** questions, char *** answers, int entry_size, void (*callback_func)(char ** strings))
-{
-	int j, i = 0;
-	char ** already_answers = NULL;
-
-	printf("> %s\n", msg);
-
-	while (questions && *questions) {
-		printf("(%c) %s\n", i + 'a', *questions);
-		i++;
-		questions++;
-	}
-
-	if (*answers == NULL)
-		*answers = (char **) malloc(sizeof(char *) * i);
-	else
-		already_answers = *answers;
-
-	while (1) {
-		int r;
-		for (j = 0 ; j < i ; j++) {
-			printf("(%c) ? ", j + 'a');
-			if (already_answers && *already_answers) {
-				(*answers)[j] = get_string_response(*already_answers);
-				already_answers++;
-			} else
-				(*answers)[j] = get_string_response(NULL);
-
-		}
-		printf("[0] Cancel  [1] Accept  [2] Re-enter answers\n? ");
-		r = get_int_response();
-		if (r == 0)
-			return RETURN_BACK;
-		if (r == 1)
-			return RETURN_OK;
-	}
-}
-
-
-void suspend_to_console(void) {}
-void resume_from_suspend(void) {}
diff --git a/mdk-stage1/tools.c b/mdk-stage1/tools.c
deleted file mode 100644
index e5d37f28b..000000000
--- a/mdk-stage1/tools.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/time.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <string.h>
-#include <ctype.h>
-#include <stdio.h>
-#include <dirent.h>
-#include <sys/types.h>
-#include <bzlib.h>
-#include <sys/mount.h>
-#include <sys/poll.h>
-#include "stage1.h"
-#include "log.h"
-#include "mount.h"
-#include "frontend.h"
-#include "automatic.h"
-
-#include "tools.h"
-
-
-static struct param_elem params[50];
-static int param_number = 0;
-
-void process_cmdline(void)
-{
-	char buf[512];
-	int fd, size, i;
-	
-	log_message("opening /proc/cmdline... ");
-	
-	if ((fd = open("/proc/cmdline", O_RDONLY)) == -1)
-		fatal_error("could not open /proc/cmdline");
-	
-	size = read(fd, buf, sizeof(buf));
-	buf[size-1] = '\0'; // -1 to eat the \n
-	close(fd);
-
-	log_message("\t%s", buf);
-
-	i = 0;
-	while (buf[i] != '\0') {
-		char *name, *value = NULL;
-		int j = i;
-		while (buf[i] != ' ' && buf[i] != '=' && buf[i] != '\0')
-			i++;
-		if (i == j) {
-			i++;
-			continue;
-		}
-		name = memdup(&buf[j], i-j + 1);
-		name[i-j] = '\0';
-
-		if (buf[i] == '=') {
-			int k = i+1;
-			i++;
-			while (buf[i] != ' ' && buf[i] != '\0')
-				i++;
-			value = memdup(&buf[k], i-k + 1);
-			value[i-k] = '\0';
-		}
-
-		params[param_number].name = name;
-		params[param_number].value = value;
-		param_number++;
-		if (!strcmp(name, "expert")) set_param(MODE_EXPERT);
-		if (!strcmp(name, "changedisk")) set_param(MODE_CHANGEDISK);
-		if (!strcmp(name, "updatemodules")) set_param(MODE_UPDATEMODULES);
-		if (!strcmp(name, "rescue")) set_param(MODE_RESCUE);
-		if (!strcmp(name, "special_stage2")) set_param(MODE_SPECIAL_STAGE2);
-		if (!strcmp(name, "automatic")) {
-			set_param(MODE_AUTOMATIC);
-			grab_automatic_params(value);
-		}
-		if (buf[i] == '\0')
-			break;
-		i++;
-	}
-	
-	log_message("\tgot %d args", param_number);
-}
-
-
-int stage1_mode = 0;
-
-int get_param(int i)
-{
-#ifdef SPAWN_INTERACTIVE
-	static int fd = 0;
-	char buf[5000];
-	char * ptr;
-	int nb;
-
-	if (fd <= 0) {
-		fd = open(interactive_fifo, O_RDONLY);
-		if (fd == -1)
-			return (stage1_mode & i);
-		fcntl(fd, F_SETFL, O_NONBLOCK);
-	}
-
-	if (fd > 0) {
-		if ((nb = read(fd, buf, sizeof(buf))) > 0) {
-			buf[nb] = '\0';
-			ptr = buf;
-			while ((ptr = strstr(ptr, "+ "))) {
-				if (!strncmp(ptr+2, "expert", 6)) set_param(MODE_EXPERT);
-				if (!strncmp(ptr+2, "rescue", 6)) set_param(MODE_RESCUE);
-				ptr++;
-			}
-			ptr = buf;
-			while ((ptr = strstr(ptr, "- "))) {
-				if (!strncmp(ptr+2, "expert", 6)) unset_param(MODE_EXPERT);
-				if (!strncmp(ptr+2, "rescue", 6)) unset_param(MODE_RESCUE);
-				ptr++;
-			}
-		}
-	}
-#endif
-
-	return (stage1_mode & i);
-}
-
-char * get_param_valued(char *param_name)
-{
-	int i;
-	for (i = 0; i < param_number ; i++)
-		if (!strcmp(params[i].name, param_name))
-			return params[i].value;
-
-	return NULL;
-}
-
-void set_param_valued(char *param_name, char *param_value)
-{
-	params[param_number].name = param_name;
-	params[param_number].value = param_value;
-	param_number++;
-}
-
-void set_param(int i)
-{
-	stage1_mode |= i;
-	if (i == MODE_RESCUE) {
-		set_param_valued("special_stage2", "rescue");
-		set_param(MODE_SPECIAL_STAGE2);
-	}
-}
-
-void unset_param(int i)
-{
-	stage1_mode &= ~i;
-}
-
-// warning, many things rely on the fact that:
-// - when failing it returns 0
-// - it stops on first non-digit char
-int charstar_to_int(char * s)
-{
-	int number = 0;
-	while (*s && isdigit(*s)) {
-		number = (number * 10) + (*s - '0');
-		s++;
-	}
-	return number;
-}
-
-int total_memory(void)
-{
-	int value;
-	struct stat statr;
-	if (stat("/proc/kcore", &statr))
-		return 0;
-
-	/* drakx powered: use /proc/kcore and rounds every 4 Mbytes */
-	value = 4 * ((int)((float)statr.st_size / 1024 / 1024 / 4 + 0.5));
-	log_message("Total Memory: %d Mbytes", value);
-
-	return value;
-}
-
-
-int ramdisk_possible(void)
-{
-	if (total_memory() > (IS_RESCUE ? MEM_LIMIT_RESCUE : MEM_LIMIT_RAMDISK))
-		return 1;
-	else {
-		log_message("warning, ramdisk is not possible due to low mem!");
-		return 0;
-	}
-}
-
-
-static void save_stuff_for_rescue(void)
-{
-	void save_this_file(char * file) {
-		char buf[5000];
-		int fd_r, fd_w, i;
-		char location[100];
-
-		if ((fd_r = open(file, O_RDONLY)) < 0) {
-			log_message("can't open %s for read", file);
-			return;
-		}
-		strcpy(location, STAGE2_LOCATION);
-		strcat(location, file);
-		if ((fd_w = open(location, O_WRONLY)) < 0) {
-			log_message("can't open %s for write", location);
-			close(fd_r);
-			return;
-		}
-		if ((i = read(fd_r, buf, sizeof(buf))) <= 0) {
-			log_message("can't read from %s", file);
-			close(fd_r); close(fd_w);
-			return;
-		}
-		if (write(fd_w, buf, i) != i)
-			log_message("can't write %d bytes to %s", i, location);
-		close(fd_r); close(fd_w);
-		log_message("saved file %s for rescue (%d bytes)", file, i);
-	}
-	save_this_file("/etc/resolv.conf");
-}
-
-
-enum return_type load_ramdisk_fd(int ramdisk_fd, int size)
-{
-	BZFILE * st2;
-	char * ramdisk = "/dev/ram3"; /* warning, verify that this file exists in the initrd, and that root=/dev/ram3 is actually passed to the kernel at boot time */
-	int ram_fd;
-	char buffer[32768];
-	int z_errnum;
-	char * wait_msg = "Loading program into memory...";
-	int bytes_read = 0;
-	int actually;
-	int seems_ok = 0;
-
-	st2 = BZ2_bzdopen(ramdisk_fd, "r");
-
-	if (!st2) {
-		log_message("Opening compressed ramdisk: %s", BZ2_bzerror(st2, &z_errnum));
-		stg1_error_message("Could not open compressed ramdisk file.");
-		return RETURN_ERROR;
-	}
-
-	ram_fd = open(ramdisk, O_WRONLY);
-	if (ram_fd == -1) {
-		log_perror(ramdisk);
-		stg1_error_message("Could not open ramdisk device file.");
-		return RETURN_ERROR;
-	}
-	
-	init_progression(wait_msg, size);
-
-	while ((actually = BZ2_bzread(st2, buffer, sizeof(buffer))) > 0) {
-		seems_ok = 1;
-		if (write(ram_fd, buffer, actually) != actually) {
-			log_perror("writing ramdisk");
-			remove_wait_message();
-			return RETURN_ERROR;
-		}
-		update_progression((int)((bytes_read += actually) / RAMDISK_COMPRESSION_RATIO));
-	}
-
-	if (!seems_ok) {
-		log_message("reading compressed ramdisk: %s", BZ2_bzerror(st2, &z_errnum));
-		BZ2_bzclose(st2); /* opened by gzdopen, but also closes the associated fd */
-		close(ram_fd);
-		remove_wait_message();
-		stg1_error_message("Could not uncompress second stage ramdisk. "
-				   "This is probably an hardware error while reading the data. "
-				   "(this may be caused by a hardware failure or a Linux kernel bug)");
-		return RETURN_ERROR;
-	}
-
-	end_progression();
-
-	BZ2_bzclose(st2); /* opened by gzdopen, but also closes the associated fd */
-	close(ram_fd);
-
-	if (my_mount(ramdisk, STAGE2_LOCATION, "ext2", 1))
-		return RETURN_ERROR;
-
-	set_param(MODE_RAMDISK);
-
-	if (IS_RESCUE) {
-		save_stuff_for_rescue();
-		if (umount(STAGE2_LOCATION)) {
-			log_perror(ramdisk);
-			return RETURN_ERROR;
-		}
-		return RETURN_OK; /* fucksike, I lost several hours wondering why the kernel won't see the rescue if it is alreay mounted */
-	}
-
-	return RETURN_OK;
-}
-
-
-char * get_ramdisk_realname(void)
-{
-	char img_name[500];
-	char * stg2_name = get_param_valued("special_stage2");
-	char * begin_img = RAMDISK_LOCATION;
-	char * end_img = "_stage2.bz2";
-
-	if (!stg2_name)
-		stg2_name = "mdkinst";
-
-	if (IS_RESCUE)
-		stg2_name = "rescue";
-	
-	strcpy(img_name, begin_img);
-	strcat(img_name, stg2_name);
-	strcat(img_name, end_img);
-
-	return strdup(img_name);
-}
-
-
-enum return_type load_ramdisk(void)
-{
-	int st2_fd;
-	struct stat statr;
-	char img_name[500];
-
-	strcpy(img_name, IMAGE_LOCATION);
-	strcat(img_name, get_ramdisk_realname());
-
-	log_message("trying to load %s as a ramdisk", img_name);
-
-	st2_fd = open(img_name, O_RDONLY); /* to be able to see the progression */
-
-	if (st2_fd == -1) {
-		log_message("open ramdisk file (%s) failed", img_name);
-		stg1_error_message("Could not open compressed ramdisk file (%s).", img_name);
-		return RETURN_ERROR;
-	}
-
-	if (stat(img_name, &statr))
-		return RETURN_ERROR;
-	else
-		return load_ramdisk_fd(st2_fd, statr.st_size);
-}
-
-/* pixel's */
-void * memdup(void *src, size_t size)
-{
-	void * r;
-	r = malloc(size);
-	memcpy(r, src, size);
-	return r;
-}
-
-
-static char ** my_env = NULL;
-static int env_size = 0;
-
-void handle_env(char ** env)
-{
-	char ** ptr = env;
-	while (ptr && *ptr) {
-		ptr++;
-		env_size++;
-	}
-	my_env = malloc(sizeof(char *) * 100);
-	memcpy(my_env, env, sizeof(char *) * (env_size+1));
-}
-
-char ** grab_env(void) {
-	return my_env;
-}
-
-void add_to_env(char * name, char * value)
-{
-	char tmp[500];
-	sprintf(tmp, "%s=%s", name, value);
-	my_env[env_size] = strdup(tmp);
-	env_size++;
-	my_env[env_size] = NULL;
-}
-
-
-char ** list_directory(char * direct)
-{
-	char * tmp[50000]; /* in /dev there can be many many files.. */
-	int i = 0;
-	struct dirent *ep;
-	DIR *dp = opendir(direct);
-	while (dp && (ep = readdir(dp))) {
-		if (strcmp(ep->d_name, ".") && strcmp(ep->d_name, "..")) {
-			tmp[i] = strdup(ep->d_name);
-			i++;
-		}
-	}
-	if (dp)
-		closedir(dp);
-	tmp[i] = NULL;
-	return memdup(tmp, sizeof(char*) * (i+1));
-}
-
-
-int string_array_length(char ** a)
-{
-	int i = 0;
-	if (!a)
-		return -1;
-	while (a && *a) {
-		a++;
-		i++;
-	}
-	return i;
-}
diff --git a/mdk-stage1/tools.h b/mdk-stage1/tools.h
deleted file mode 100644
index 5d38b0364..000000000
--- a/mdk-stage1/tools.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _TOOLS_H_
-#define _TOOLS_H_
-
-#include <stdlib.h>
-
-void process_cmdline(void);
-int get_param(int i);
-void set_param(int i);
-void unset_param(int i);
-int charstar_to_int(char * s);
-int total_memory(void);
-int ramdisk_possible(void);
-char * get_ramdisk_realname(void);
-enum return_type load_ramdisk(void);
-enum return_type load_ramdisk_fd(int ramdisk_fd, int size);
-void * memdup(void *src, size_t size);
-void add_to_env(char * name, char * value);
-void handle_env(char ** env);
-char ** grab_env(void);
-char ** list_directory(char * direct);
-int string_array_length(char ** a);
-
-struct param_elem
-{
-	char * name;
-	char * value;
-};
-
-#define ptr_begins_static_str(pointer,static_str) (!strncmp(pointer,static_str,sizeof(static_str)-1))
-#define streq !strcmp
-
-#endif
diff --git a/mdk-stage1/url.c b/mdk-stage1/url.c
deleted file mode 100644
index ada5696cd..000000000
--- a/mdk-stage1/url.c
+++ /dev/null
@@ -1,501 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan <ewt@redhat.com> and Matt Wilson <msw@redhat.com>
- *
- * Copyright 1999 Red Hat, Inc.
- *
- */
-
-#include <alloca.h>
-#include <sys/socket.h>
-#include <sys/types.h>
-#include <netinet/in_systm.h>
-
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <netdb.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <sys/types.h>
-#include <unistd.h>
-#include <sys/poll.h>
-
-#include <netinet/in.h>
-#include <netinet/ip.h>
-#include <arpa/inet.h>
-
-#include "dns.h"
-#include "log.h"
-#include "tools.h"
-
-#include "url.h"
-
-
-#define TIMEOUT_SECS 60
-#define BUFFER_SIZE 4096
-
-
-static int ftp_check_response(int sock, char ** str)
-{
-	static char buf[BUFFER_SIZE + 1];
-	int bufLength = 0; 
-	struct pollfd polls;
-	char * chptr, * start;
-	int bytesRead, rc = 0;
-	int doesContinue = 1;
-	char errorCode[4];
- 
-	errorCode[0] = '\0';
-    
-	do {
-		polls.fd = sock;
-		polls.events = POLLIN;
-		if (poll(&polls, 1, TIMEOUT_SECS*1000) != 1)
-			return FTPERR_BAD_SERVER_RESPONSE;
-
-		bytesRead = read(sock, buf + bufLength, sizeof(buf) - bufLength - 1);
-
-		bufLength += bytesRead;
-
-		buf[bufLength] = '\0';
-
-		/* divide the response into lines, checking each one to see if 
-		   we are finished or need to continue */
-
-		start = chptr = buf;
-
-		do {
-			while (*chptr != '\n' && *chptr) chptr++;
-
-			if (*chptr == '\n') {
-				*chptr = '\0';
-				if (*(chptr - 1) == '\r') *(chptr - 1) = '\0';
-				if (str) *str = start;
-
-				if (errorCode[0]) {
-					if (!strncmp(start, errorCode, 3) && start[3] == ' ')
-						doesContinue = 0;
-				} else {
-					strncpy(errorCode, start, 3);
-					errorCode[3] = '\0';
-					if (start[3] != '-') {
-						doesContinue = 0;
-					} 
-				}
-
-				start = chptr + 1;
-				chptr++;
-			} else {
-				chptr++;
-			}
-		} while (*chptr);
-
-		if (doesContinue && chptr > start) {
-			memcpy(buf, start, chptr - start - 1);
-			bufLength = chptr - start - 1;
-		} else {
-			bufLength = 0;
-		}
-	} while (doesContinue);
-
-	if (*errorCode == '4' || *errorCode == '5') {
-		if (!strncmp(errorCode, "550", 3)) {
-			return FTPERR_FILE_NOT_FOUND;
-		}
-
-		return FTPERR_BAD_SERVER_RESPONSE;
-	}
-
-	if (rc) return rc;
-
-	return 0;
-}
-
-static int ftp_command(int sock, char * command, char * param)
-{
-	char buf[500];
-	int rc;
-
-	strcpy(buf, command);
-	if (param) {
-		strcat(buf, " ");
-		strcat(buf, param);
-	}
-	
-	strcat(buf, "\r\n");
-     
-	if (write(sock, buf, strlen(buf)) != (ssize_t)strlen(buf)) {
-		return FTPERR_SERVER_IO_ERROR;
-	}
-
-	if ((rc = ftp_check_response(sock, NULL)))
-		return rc;
-
-	return 0;
-}
-
-static int get_host_address(char * host, struct in_addr * address)
-{
-	if (isdigit(host[0])) {
-		if (!inet_aton(host, address)) {
-			return FTPERR_BAD_HOST_ADDR;
-		}
-	} else {
-		if (mygethostbyname(host, address))
-			return FTPERR_BAD_HOSTNAME;
-	}
-    
-	return 0;
-}
-
-int ftp_open_connection(char * host, char * name, char * password, char * proxy)
-{
-	int sock;
-	struct in_addr serverAddress;
-	struct sockaddr_in destPort;
-	char * buf;
-	int rc;
-	int port = 21;
-
-	if (!strcmp(name, "")) {
-		name = "anonymous";
-		password = "-drakx@";
-	}
-
-	if (strcmp(proxy, "")) {
-		buf = alloca(strlen(name) + strlen(host) + 5);
-		sprintf(buf, "%s@%s", name, host);
-		name = buf;
-		host = proxy;
-	}
-
-	if ((rc = get_host_address(host, &serverAddress))) return rc;
-
-	sock = socket(AF_INET, SOCK_STREAM, IPPROTO_IP);
-	if (sock < 0) {
-		return FTPERR_FAILED_CONNECT;
-	}
-
-	destPort.sin_family = AF_INET;
-	destPort.sin_port = htons(port);
-	destPort.sin_addr = serverAddress;
-
-	if (connect(sock, (struct sockaddr *) &destPort, sizeof(destPort))) {
-		close(sock);
-		return FTPERR_FAILED_CONNECT;
-	}
-
-	/* ftpCheckResponse() assumes the socket is nonblocking */
-	if (fcntl(sock, F_SETFL, O_NONBLOCK)) {
-		close(sock);
-		return FTPERR_FAILED_CONNECT;
-	}
-
-	if ((rc = ftp_check_response(sock, NULL))) {
-		return rc;     
-	}
-
-	if ((rc = ftp_command(sock, "USER", name))) {
-		close(sock);
-		return rc;
-	}
-
-	if ((rc = ftp_command(sock, "PASS", password))) {
-		close(sock);
-		return rc;
-	}
-
-	if ((rc = ftp_command(sock, "TYPE", "I"))) {
-		close(sock);
-		return rc;
-	}
-
-	return sock;
-}
-
-
-int ftp_data_command(int sock, char * command, char * param)
-{
-	int dataSocket;
-	struct sockaddr_in dataAddress;
-	int i, j;
-	char * passReply;
-	char * chptr;
-	char retrCommand[500];
-	int rc;
-
-	if (write(sock, "PASV\r\n", 6) != 6) {
-		return FTPERR_SERVER_IO_ERROR;
-	}
-	if ((rc = ftp_check_response(sock, &passReply)))
-		return FTPERR_PASSIVE_ERROR;
-
-	chptr = passReply;
-	while (*chptr && *chptr != '(') chptr++;
-	if (*chptr != '(') return FTPERR_PASSIVE_ERROR; 
-	chptr++;
-	passReply = chptr;
-	while (*chptr && *chptr != ')') chptr++;
-	if (*chptr != ')') return FTPERR_PASSIVE_ERROR;
-	*chptr-- = '\0';
-
-	while (*chptr && *chptr != ',') chptr--;
-	if (*chptr != ',') return FTPERR_PASSIVE_ERROR;
-	chptr--;
-	while (*chptr && *chptr != ',') chptr--;
-	if (*chptr != ',') return FTPERR_PASSIVE_ERROR;
-	*chptr++ = '\0';
-    
-	/* now passReply points to the IP portion, and chptr points to the
-	   port number portion */
-
-	dataAddress.sin_family = AF_INET;
-	if (sscanf(chptr, "%d,%d", &i, &j) != 2) {
-		return FTPERR_PASSIVE_ERROR;
-	}
-	dataAddress.sin_port = htons((i << 8) + j);
-
-	chptr = passReply;
-	while (*chptr++) {
-		if (*chptr == ',') *chptr = '.';
-	}
-
-	if (!inet_aton(passReply, &dataAddress.sin_addr)) 
-		return FTPERR_PASSIVE_ERROR;
-
-	dataSocket = socket(AF_INET, SOCK_STREAM, IPPROTO_IP);
-	if (dataSocket < 0) {
-		return FTPERR_FAILED_CONNECT;
-	}
-
-	if (!param)
-		sprintf(retrCommand, "%s\r\n", command);
-	else
-		sprintf(retrCommand, "%s %s\r\n", command, param);
-	    
-	i = strlen(retrCommand);
-   
-	if (write(sock, retrCommand, i) != i) {
-		return FTPERR_SERVER_IO_ERROR;
-	}
-
-	if (connect(dataSocket, (struct sockaddr *) &dataAddress, 
-		    sizeof(dataAddress))) {
-		close(dataSocket);
-		return FTPERR_FAILED_DATA_CONNECT;
-	}
-
-	if ((rc = ftp_check_response(sock, NULL))) {
-		close(dataSocket);
-		return rc;
-	}
-
-	return dataSocket;
-}
-
-
-static int ftp_get_filesize(int sock, char * remotename)
-{
-	int size = 0;
-	char buf[2000];
-	char file[500];
-	char * ptr;
-	int fd, rc, tot;
-	int i;
-
-	strcpy(buf, remotename);
-	ptr = strrchr(buf, '/');
-	if (!*ptr)
-		return -1;
-	*ptr = '\0';
-
-	strcpy(file, ptr+1);
-
-	if ((rc = ftp_command(sock, "CWD", buf))) {
-		return -1;
-	}
-
-	fd = ftp_data_command(sock, "LIST", NULL);
-	if (fd <= 0) {
-		close(sock);
-		return -1;
-	}
-
-	ptr = buf;
-	while ((tot = read(fd, ptr, sizeof(buf) - (ptr - buf))) != 0)
-		ptr += tot;
-	*ptr = '\0';
-	close(fd);
-
-	if (!(ptr = strstr(buf, file))) {
-		log_message("FTP/get_filesize: Bad mood, directory does not contain searched file (%s)", file);
-		if (ftp_end_data_command(sock))
-			close(sock);
-		return -1;
-	}
-
-	for (i=0; i<4; i++) {
-		while (*ptr && *ptr != ' ')
-			ptr--;
-		while (*ptr && *ptr == ' ')
-			ptr--;
-	}
-	while (*ptr && *ptr != ' ')
-		ptr--;
-
-	if (ptr)
-		size = charstar_to_int(ptr+1);
-	else
-		size = 0;
-
-	if (ftp_end_data_command(sock)) {
-		close(sock);
-		return -1;
-	}
-
-	return size;
-}
-
-
-int ftp_start_download(int sock, char * remotename, int * size)
-{
-	if ((*size = ftp_get_filesize(sock, remotename)) == -1) {
-		log_message("FTP: could not get filesize (trying to continue)");
-		*size = 0;
-	}
-	return ftp_data_command(sock, "RETR", remotename);
-}
-
-
-int ftp_end_data_command(int sock)
-{
-	if (ftp_check_response(sock, NULL))
-		return FTPERR_BAD_SERVER_RESPONSE;
-	
-	return 0;
-}
-
-  
-int http_download_file(char * hostname, char * remotename, int * size)
-{
-	char * buf;
-	char headers[4096];
-	char * nextChar = headers;
-	int checkedCode;
-	struct in_addr serverAddress;
-	struct pollfd polls;
-	int sock;
-	int rc;
-	struct sockaddr_in destPort;
-	char * header_content_length = "Content-Length: ";
-
-	if ((rc = get_host_address(hostname, &serverAddress))) return rc;
-
-	sock = socket(AF_INET, SOCK_STREAM, IPPROTO_IP);
-	if (sock < 0) {
-		return FTPERR_FAILED_CONNECT;
-	}
-
-	destPort.sin_family = AF_INET;
-	destPort.sin_port = htons(80);
-	destPort.sin_addr = serverAddress;
-
-	if (connect(sock, (struct sockaddr *) &destPort, sizeof(destPort))) {
-		close(sock);
-		return FTPERR_FAILED_CONNECT;
-	}
-
-	buf = alloca(strlen(remotename) + 20);
-	sprintf(buf, "GET %s HTTP/0.9\r\n\r\n", remotename);
-	write(sock, buf, strlen(buf));
-
-	/* This is fun; read the response a character at a time until we:
-
-	   1) Get our first \r\n; which lets us check the return code
-	   2) Get a \r\n\r\n, which means we're done */
-
-	*nextChar = '\0';
-	checkedCode = 0;
-	while (!strstr(headers, "\r\n\r\n")) {
-		polls.fd = sock;
-		polls.events = POLLIN;
-		rc = poll(&polls, 1, TIMEOUT_SECS*1000);
-
-		if (rc == 0) {
-			close(sock);
-			return FTPERR_SERVER_TIMEOUT;
-		} else if (rc < 0) {
-			close(sock);
-			return FTPERR_SERVER_IO_ERROR;
-		}
-
-		if (read(sock, nextChar, 1) != 1) {
-			close(sock);
-			return FTPERR_SERVER_IO_ERROR;
-		}
-
-		nextChar++;
-		*nextChar = '\0';
-
-		if (nextChar - headers == sizeof(headers)) {
-			close(sock);
-			return FTPERR_SERVER_IO_ERROR;
-		}
-
-		if (!checkedCode && strstr(headers, "\r\n")) {
-			char * start, * end;
-
-			checkedCode = 1;
-			start = headers;
-			while (!isspace(*start) && *start) start++;
-			if (!*start) {
-				close(sock);
-				return FTPERR_SERVER_IO_ERROR;
-			}
-			start++;
-
-			end = start;
-			while (!isspace(*end) && *end) end++;
-			if (!*end) {
-				close(sock);
-				return FTPERR_SERVER_IO_ERROR;
-			}
-
-			*end = '\0';
-			if (!strcmp(start, "404")) {
-				close(sock);
-				return FTPERR_FILE_NOT_FOUND;
-			} else if (strcmp(start, "200")) {
-				close(sock);
-				return FTPERR_BAD_SERVER_RESPONSE;
-			}
-
-			*end = ' ';
-		}
-	}
-
-	if ((buf = strstr(headers, header_content_length)))
-		*size = charstar_to_int(buf + strlen(header_content_length));
-	else
-		*size = 0;
-
-	return sock;
-}
diff --git a/mdk-stage1/url.h b/mdk-stage1/url.h
deleted file mode 100644
index 5a59bd814..000000000
--- a/mdk-stage1/url.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan <ewt@redhat.com> and Matt Wilson <msw@redhat.com>
- *
- * Copyright 1999 Red Hat, Inc.
- *
- */
-
-#ifndef _URL_H_
-#define _URL_H_
-
-int ftp_open_connection(char * host, char * name, char * password, char * proxy);
-int ftp_start_download(int sock, char * remotename, int * size);
-int ftp_end_data_command(int sock);
-
-int http_download_file(char * hostname, char * remotename, int * size);
-
-
-#define FTPERR_BAD_SERVER_RESPONSE   -1
-#define FTPERR_SERVER_IO_ERROR       -2
-#define FTPERR_SERVER_TIMEOUT        -3
-#define FTPERR_BAD_HOST_ADDR         -4
-#define FTPERR_BAD_HOSTNAME          -5
-#define FTPERR_FAILED_CONNECT        -6
-#define FTPERR_FILE_IO_ERROR         -7
-#define FTPERR_PASSIVE_ERROR         -8
-#define FTPERR_FAILED_DATA_CONNECT   -9
-#define FTPERR_FILE_NOT_FOUND        -10
-#define FTPERR_UNKNOWN               -100
-
-#endif
diff --git a/mdk-stage1/usb-resource/.cvsignore b/mdk-stage1/usb-resource/.cvsignore
deleted file mode 100644
index a7d0cfa9a..000000000
--- a/mdk-stage1/usb-resource/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-usb-ids.h
diff --git a/mdk-stage1/usb-resource/Makefile b/mdk-stage1/usb-resource/Makefile
deleted file mode 100644
index eb80ce6da..000000000
--- a/mdk-stage1/usb-resource/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
- #******************************************************************************
- #
- # $Id$
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-
-all: usb-ids.h
-
-usb-ids.h: /usr/share/ldetect-lst/usbtable update-usb-ids.pl
-	perl update-usb-ids.pl > $@ || rm -f $@
-
-clean:
-	rm -f usb-ids.h
diff --git a/mdk-stage1/usb-resource/update-usb-ids.pl b/mdk-stage1/usb-resource/update-usb-ids.pl
deleted file mode 100755
index 2a54a678b..000000000
--- a/mdk-stage1/usb-resource/update-usb-ids.pl
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/usr/bin/perl
-
-use strict;
-use MDK::Common;
-
-require '/usr/bin/merge2pcitable.pl';
-my $pci = read_pcitable("/usr/share/ldetect-lst/pcitable");
-my $usb = read_pcitable("/usr/share/ldetect-lst/usbtable");
-
-print '
-
-
-struct usb_module_map {
-	unsigned short	vendor;     /* vendor */
-	unsigned short	id;         /* device */
-	const char      *name;      /* human readable name */
-	const char      *module;    /* module to load */
-};
-
-';
-
-print "struct pci_module_map usb_pci_ids[] = {
-
-";
-
-while (my ($k, $v) = each %$pci) {
-    $v->[0] =~ /^usb-|^ehci-hcd/ or next;
-    $k =~ /^(....)(....)/;
-    printf qq|\t{ 0x%s, 0x%s, "", "%s" },\n|,
-      $1, $2, $v->[0];
-}
-
-print "};
-int usb_num_ids=sizeof(usb_pci_ids)/sizeof(struct pci_module_map);
-";
-
-print "struct usb_module_map usb_usb_ids[] = {
-";
-
-my @modules = chomp_(`perl ../../kernel/modules.pl pci_modules4stage1:"network/usb disk/usb"`);
-
-    foreach my $k (sort keys %$usb) {
-	my $v = $usb->{$k};
-	member($v->[0], @modules) or next;
-	$k =~ /^(....)(....)/;
-	printf qq|\t{ 0x%s, 0x%s, "%s", "%s" },\n|,
-	  $1, $2, $v->[1], $v->[0];
-    }
-
-    print "};
-int usb_usb_num_ids=sizeof(usb_usb_ids)/sizeof(struct usb_module_map);
-";
diff --git a/perl-install/ChangeLog b/perl-install/ChangeLog
deleted file mode 100644
index e74787675..000000000
--- a/perl-install/ChangeLog
+++ /dev/null
@@ -1,25165 +0,0 @@
-2002/07/07  daouda
-
-	* Makefile: 
-	  - remove share/wizard.rc in DISTFILE
-
-	* drakxtools.spec: 
-	  - directory should exist before mv'ing things (mkdir
-	%%buildroot%%_initrddir)
-	  - mv typo in %install section (titi sux)
-
-2002/07/07  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm: smarter raidAutoStartRaidtab
-	great new raidAutoStartRaidtab allowing to handle existing software
-	raids
-	even when RAID_AUTORUN is not supported by kernel (which is the case for
-	us
-	since md.o is a not builtin the kernel)
-	remove detect_devices::check (including the annoying log about no
-	modules for the pci entry)
-
-	* modules.pm: new "append_to_etc_modules" function
-	remove detect_devices::check (including the annoying log about no
-	modules for the pci entry)
-
-	* fsedit.pm: great new raidAutoStartRaidtab allowing to handle existing
-	software raids
-	even when RAID_AUTORUN is not supported by kernel (which is the case for
-	us
-	since md.o is a not builtin the kernel)
-
-	* any.pm: small regexp cleanup
-
-	* fs.pm, partition_table.pm: for greater symmetry with smb, drop isNfs in
-	favour of isThisFs('nfs', ...)
-
-	* interactive_newt.pm: make the buttons work in all cases
-	  - workaround segfaults
-	  - ensure the perl values are set when calling the clicked_may_quit
-	callback
-
-	* devices.pm: use c::total_sectors() instead of BLKGETSIZE
-
-	* diskdrake/interactive.pm, raid.pm: ensure the raid is disactivated and
-	marked dirty on any actions that destroy the raid
-
-2002/07/06  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (ask_users): the user name length must be <= 32
-
-	* diskdrake/interactive.pm (as suggested by Alexander Skwar)
-	  - in interactive::check_type, check if the package (like jfsprogs) is
-	installed
-	  - use interactive::check_type where usefull
-	  - cleanup
-
-	* Makefile.config: standalone/drakbug doesn't exist! (why did deush add
-	it???)
-	it is standalone/harddrake2, not standalone/harddrake (poor deush must
-	be loosing his brain :p)
-
-	* diskdrake/hd_gtk.pm: s/check_type/diskdrake::interactive::check_type/
-	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
-	  - remove unused wizard.rc
-	(as suggested by Alexander Skwar)
-	  - in interactive::check_type, check if the package (like jfsprogs) is
-	installed
-	  - use interactive::check_type where usefull
-	  - cleanup
-
-	* fsedit.pm: /root and /mnt must "remain within the root filesystem" (ie
-	can't be used as mountpoints), dixit redhat
-	(package_needed_for_partition_type): return the package needed for a
-	partition type
-	(check_type): cleanup
-
-	* install_any.pm (setDefaultPackages): use
-	fsedit::package_needed_for_partition_type to get things like jfsprogs
-
-	* fs.pm: supermount now handles fs=auto, using it :)
-
-	* Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec: 
-	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
-	  - remove unused wizard.rc
-
-2002/07/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* Makefile.config: add the harddrake service which was missing
-
-	* printer.pm: try to simplify
-
-	* harddrake/ui.pm: simplify: use reverse
-	  - help system:
-	  - add an help entry in help menu;
-	   - begin to describe information fields
-	
-	   - reformat license in about window
-	
-	  - information frame (mostly fixing incoherency between various hw
-	  classes fields)
-	
-	   - s/media type/media class/
-	
-	   - s/info/Hardware id/
-	
-	   - s/device/device file/
-	
-	   - split description into manufacturer/description
-	
-	   - eide devices:
-	
-		  - rename bus as bus_location
-	
-	       - set interface_type as bus
-	
-	   - scsi devices:
-	
-	       - set bus to SCSI
-	
-		  - set bus_location to bus:id fields
-	
-	   - don't print pci subids when non set
-	
-	   - remove fields that were already used above (vendor id subvendor
-	     subid pci_bus pci_device pci_function)
-	
-	  - no need to return window after program exit
-	
-	  - print usage if needed
-	
-	  - embed hardware tree in a "detected hardware" frame
-	
-	  - cleanups:
-	
-	   - rename widget2 as frame
-	
-	   - remove dead commented code
-
-	* drakxtools.spec: add harddrake2 service
-
-	* standalone/icons/harddrake2/webcam.png,
-	standalone/icons/harddrake2/harddrake.png,
-	standalone/icons/harddrake2/keyboard.png,
-	standalone/icons/harddrake2/ide_hd.png,
-	standalone/icons/harddrake2/cable.png,
-	standalone/icons/harddrake2/video.png,
-	standalone/icons/harddrake2/tape.png,
-	standalone/icons/harddrake2/joystick.png,
-	standalone/icons/harddrake2/harddisk.png,
-	standalone/icons/harddrake2/usb.png,
-	standalone/icons/harddrake2/memory.png,
-	standalone/icons/harddrake2/hw_network.png,
-	standalone/icons/harddrake2/scsi_hd.png,
-	standalone/icons/harddrake2/unknown.png,
-	standalone/icons/harddrake2/floppy.png,
-	standalone/icons/harddrake2/hw_printer.png,
-	standalone/icons/harddrake2/scanner.png,
-	standalone/icons/harddrake2/cd.png,
-	standalone/icons/harddrake2/isdn.png,
-	standalone/icons/harddrake2/tv.png,
-	standalone/icons/harddrake2/sound.png,
-	standalone/icons/harddrake2/scsi.png,
-	standalone/icons/harddrake2/cpu.png,
-	standalone/icons/harddrake2/hw_mouse.png,
-	standalone/icons/harddrake2/modem.png,
-	standalone/icons/harddrake2/K7.png: add harddrake2 icons
-
-2002/07/06  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (ask_users): the user name length must be <= 32
-
-	* commands.pm: adapt to new modprobe.pm
-
-	* diskdrake/hd_gtk.pm: 
-	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
-	  - remove unused wizard.rc
-	(as suggested by Alexander Skwar)
-	  - in interactive::check_type, check if the package (like jfsprogs) is
-	installed
-	  - use interactive::check_type where usefull
-	  - cleanup
-
-	* diskdrake/interactive.pm (as suggested by Alexander Skwar)
-	  - in interactive::check_type, check if the package (like jfsprogs) is
-	installed
-	  - use interactive::check_type where usefull
-	  - cleanup
-	(Resize): resize2fs handles ext3 :)
-
-	* install_any.pm (setDefaultPackages): use
-	fsedit::package_needed_for_partition_type to get things like jfsprogs
-	when merge_fstabs, handle in a different way mtab and fstab (or
-	manualFstab)
-	=> this allows to force the type&options in manualFstab
-
-	* fsedit.pm (package_needed_for_partition_type): return the package needed
-	for a partition type
-	(check_type): cleanup
-
-	* docs/comparisons: various remarks about mandrake
-
-	* partition_table_lvm_PV.pm: Allows people having PVs on unpartitioned
-	disks to install
-	(but no way to create such beasts)
-
-	* Makefile.config: standalone/drakbug doesn't exist! (why did deush add
-	it???)
-	it is standalone/harddrake2, not standalone/harddrake (poor deush must
-	be loosing his brain :p)
-	add harddrake pm's
-
-	* partition_table.pm: Allows people having PVs on unpartitioned disks to
-	install
-	(but no way to create such beasts)
-	cleanup
-
-	* fs.pm: supermount now handles fs=auto, using it :)
-	when merge_fstabs, handle in a different way mtab and fstab (or
-	manualFstab)
-	=> this allows to force the type&options in manualFstab
-
-	* Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec: 
-	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
-	  - remove unused wizard.rc
-
-2002/07/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/lsnetdrake: simplify
-
-	* Makefile: add harddrake to DISTFILES
-
-	* printer.pm: try to simplify
-
-	* harddrake/TODO: add bits regarding eide and scsi
-
-	* standalone/harddrake2: add missing 'use lib' due to harddrak::ui changes
-
-	* harddrake/ui.pm: simplify: use reverse
-	  - help system:
-	  - add an help entry in help menu;
-	   - begin to describe information fields
-	
-	   - reformat license in about window
-	
-	  - information frame (mostly fixing incoherency between various hw
-	  classes fields)
-	
-	   - s/media type/media class/
-	
-	   - s/info/Hardware id/
-	
-	   - s/device/device file/
-	
-	   - split description into manufacturer/description
-	
-	   - eide devices:
-	
-		  - rename bus as bus_location
-	
-	       - set interface_type as bus
-	
-	   - scsi devices:
-	
-	       - set bus to SCSI
-	
-		  - set bus_location to bus:id fields
-	
-	   - don't print pci subids when non set
-	
-	   - remove fields that were already used above (vendor id subvendor
-	     subid pci_bus pci_device pci_function)
-	
-	  - no need to return window after program exit
-	
-	  - print usage if needed
-	
-	  - embed hardware tree in a "detected hardware" frame
-	
-	  - cleanups:
-	
-	   - rename widget2 as frame
-	
-	   - remove dead commented code
-
-	* harddrake/data.pm: add a configurator for sound
-
-	* standalone/icons/harddrake2/cable.png,
-	standalone/icons/harddrake2/tape.png,
-	standalone/icons/harddrake2/usb.png,
-	standalone/icons/harddrake2/hw_network.png,
-	standalone/icons/harddrake2/unknown.png,
-	standalone/icons/harddrake2/hw_printer.png,
-	standalone/icons/harddrake2/scanner.png,
-	standalone/icons/harddrake2/isdn.png,
-	standalone/icons/harddrake2/cd.png,
-	standalone/icons/harddrake2/scsi.png,
-	standalone/icons/harddrake2/hw_mouse.png,
-	standalone/icons/harddrake2/K7.png,
-	standalone/icons/harddrake2/webcam.png,
-	standalone/icons/harddrake2/harddrake.png,
-	standalone/icons/harddrake2/keyboard.png,
-	standalone/icons/harddrake2/ide_hd.png,
-	standalone/icons/harddrake2/harddisk.png,
-	standalone/icons/harddrake2/joystick.png,
-	standalone/icons/harddrake2/video.png,
-	standalone/icons/harddrake2/memory.png,
-	standalone/icons/harddrake2/scsi_hd.png,
-	standalone/icons/harddrake2/floppy.png,
-	standalone/icons/harddrake2/sound.png,
-	standalone/icons/harddrake2/tv.png, standalone/icons/harddrake2/cpu.png,
-	standalone/icons/harddrake2/modem.png: add harddrake2 icons
-
-2002/07/05  daouda
-
-	* Makefile.config: 
-	  - add harddrake drakbug drakTermServ to STANDALONEPMS_
-
-	* drakxtools.spec: 
-	  - snapshot
-	  - new entries:
-	o harddrake2 : new hardware detection && configuration tool
-		o drakbugreport: bug reporting tool a la Kde (not working!)
-		o drakTermServ : configuration tool for diskless stations.
-
-2002/07/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (prepare_write_fstab): for supermount, have "none" as the device
-	(cleaner, and
-	more coherent with the "supermount" script (tx to FredC))
-
-2002/07/05  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* install_steps_interactive.pm: minimize startup: only load
-	harddrake::bttv if the user click on "tv
-	card" field in the hw summary window
-	use harddrake::bttv to let people configure their tv card if it's
-	misdetected
-
-	* harddrake/ui.pm: remove uneeded "#!/...", standalone, lib, ... (this is
-	a module)
-	POSIX is no more used too.
-
-	* harddrake/bttv.pm: remove device test: there're only two harddrake::bttv
-	users,
-	install_steps_interactive.pm and drakxtv which both have already
-	tested that a bttv managed tv card is there.
-	  - add more tv cards
-	  - enable users to select number of buffers for mmap()
-	  - better description for pll setting
-	
-	  - add tooltips help for some entries
-	tv cards list:
-	
-		- split multi-cards entries
-	
-	     - reverse the hash (needed since now bttv card types are not
-	       anymore unique)
-	
-		- complete the list from various sources
-	
-		- use a tree to display the list, it's clearer now since it's
-	       splitted by vendors
-	
-	  - longer message
-	  - remove uneeded stuff for modules ("#!/..", "use lib..", "use
-	  standalone", ...)
-	
-	  - simplify bttv options managment:
-	
-	   - use if_, thanks MDK::Common
-	
-	   - s/mapn/map by using a hash at first
-	
-	   - s/mapn{if}/map{if_}
-	
-	  - don't read/write modules.conf here, drakx take care of that for us
-	
-	thus, the test program became:
-	
-	#!/usr/bin/perl
-	
-	use strict;
-	use lib qw(/usr/lib/libDrakX);
-	
-	use standalone;
-	use bttv;
-	use interactive;
-	use modules;
-	
-	modules::read_conf;
-	bttv::config('interactive'->vnew());
-	modules::write_conf;
-	spec29: bttv configuration part of drakxtv.
-	it can be used by:
-	
-	#!/usr/bin/perl
-	
-	use strict;
-	use lib qw(/usr/lib/libDrakX);
-	
-	use standalone;
-	use harddrake::bttv;
-	use interactive;
-	
-	bttv::config('interactive'->vnew());
-
-	* drakxtools.spec: fix typo
-	fix dirs1/dirs2 mismatch
-	  - M-q descriptions
-	  - simplify file lists building
-	  - we can use several -f on one "%%files" line
-
-	* standalone/drakxtv: if we're root and there's a tv card managed by bttv,
-	offer to
-	configure bttv trough harddrake::bttv
-
-	* tools/cvslog2changelog.pl: typo fix
-
-	* harddrake/data.pm: remove uneeded "#!/.." and "use lib"
-
-2002/07/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Makefile: 
-	  - handle /lib/i686 case
-	  - replace Mandrake/RPMS with Mandrake/RPMS*
-
-2002/07/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
-	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
-	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
-	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/config.h,
-	mdk-stage1/pcmcia/driver_ops.h, mdk-stage1/pcmcia/version.h,
-	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/pcmcia/cs.h,
-	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
-	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
-	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/pcmcia/tcic.h,
-	mdk-stage1/pcmcia/yacc_config.h, mdk-stage1/pcmcia/pcmcia_probe.c:
-	pcmcia is now pcmcia_ (it was to begin with a clean branch of unmodified
-	sources)
-
-2002/07/05  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: make it work with "use
-	strict"
-	do not look at the mar files anymore, only use kernel/modules.pl (and so
-	list_modules.pm)
-
-	* diskdrake/interactive.pm: handle comments in fstab
-
-	* fs.pm (merge_info_from_fstab): try to keep options from merged fstab IF
-	the entry is for the same mountpoint AND the same device
-	handle comments in fstab
-
-	* share/rpmsrate: add gnupg in "4 SYSTEM", so that rpm do not *Require*
-	gnupg, only suggest it very strongly :)
-
-	* mdk-stage1/usb-resource/update-usb-ids.pl: 
-	  - do not use mar files for the list of modules, use list_modules.pm
-	via kernel/modules.pl instead
-	  - use read_pcitable to parse usbtable
-
-2002/07/05  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* harddrake/ui.pm: remove uneeded "#!/...", standalone, lib, ... (this is
-	a module)
-	POSIX is no more used too.
-
-	* drakxtools.spec: fix typo
-	fix dirs1/dirs2 mismatch
-	  - M-q descriptions
-	  - simplify file lists building
-	  - we can use several -f on one "%%files" line
-	  - add preliminary harddrake support
-	
-	  - clean %post
-	
-	  - bump version number
-
-	* harddrake/bttv.pm: 
-	  - remove uneeded stuff for modules ("#!/..", "use lib..", "use
-	standalone", ...)
-	  - simplify bttv options managment:
-	
-	   - use if_, thanks MDK::Common
-	
-	   - s/mapn/map by using a hash at first
-	
-	   - s/mapn{if}/map{if_}
-	
-	  - don't read/write modules.conf here, drakx take care of that for us
-	
-	thus, the test program became:
-	
-	#!/usr/bin/perl
-	
-	use strict;
-	use lib qw(/usr/lib/libDrakX);
-	
-	use standalone;
-	use bttv;
-	use interactive;
-	use modules;
-	
-	modules::read_conf;
-	bttv::config('interactive'->vnew());
-	modules::write_conf;
-	spec29: bttv configuration part of drakxtv.
-	it can be used by:
-	
-	#!/usr/bin/perl
-	
-	use strict;
-	use lib qw(/usr/lib/libDrakX);
-	
-	use standalone;
-	use harddrake::bttv;
-	use interactive;
-	
-	bttv::config('interactive'->vnew());
-
-	* Makefile: don't use sed when not needed
-
-	* install_steps_interactive.pm: minimize startup: only load
-	harddrake::bttv if the user click on "tv
-	card" field in the hw summary window
-	use harddrake::bttv to let people configure their tv card if it's
-	misdetected
-
-	* harddrake/data.pm: remove uneeded "#!/.." and "use lib"
-
-2002/07/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_auto_install.pm,
-	install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm,
-	printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm,
-	install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new
-	modules.pm
-
-	* c/stuff.xs.pm: adapt to new ldetect
-
-	* modules.pm: reworked, cleaned:
-	  - the list of modules is moved to kernel/list_modules.pm (and a few
-	functions too)
-	  - new "add_probeall" function (similar to "add_alias")
-	  -> used for scsi_hostadapter and usb-interface
-	  - "load_multi" removed in favour of "load" which is now more powerful
-	  - load_thiskind renamed load_category
-	  - get_that_type renamed probe_category
-	  - %modules::drivers dropped (handled for list_modules)
-	still more cleanup to come
-
-	* rescue/make_rescue_img: adapt to the move all.modules ->
-	kernel/all.modules  and  all.kernels -> kernel/all.kernels
-
-	* modparm.pm: rework, cleanup, simplify and make it work
-
-	* install2: create symlink list_modules.pm in current directory for
-	testing purpose
-
-	* Makefile: when building the tar for drakxtools, handle specially
-	list_modules.pm
-	adapt to the move all.modules -> kernel/all.modules  and  all.kernels ->
-	kernel/all.kernels
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel"
-	containing:
-	  - all.modules all.kernels update_kernel
-	  - part of perl-install/modules.pm now in kernel/list_modules.pm and
-	kernel/modules.pl
-	  - update_kernel cleaned (it doesn't mention module names anymore, it
-	is now in kernel/modules.pl)
-	  - cleanup Makefile
-	  - mdk-stage1 doesn't depend on perl-install anymore
-	(more precisely mdk-stage1/pci-resource/update-pci-ids.pl)
-
-	* any.pm: reworked & cleaned the kernel modules part
-	  - adapt to new modules.pm
-	  - adapt to new modparm.pm
-	  - renamed setup_thiskind to load_category
-	  - renamed setup_thiskind_backend to load_category_no_message
-
-	* share/po/Makefile: make the "clean" rule less verbose
-
-2002/07/04  daouda
-
-	* standalone/draknet: 
-	  - don't display clear password
-
-2002/07/04  fcrozat
-
-	* share/rpmsrate: Fix GNOME2 packages
-	Install urw-fonts when installing XFree
-
-2002/07/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-	* share/po/fr.po: updated French file
-
-	* lang.pm: Changed some languages to defautl to utf-8
-	removed X11_NOT_LOCALIZED (now Gnome2 fully supports right-to-left
-	languages)
-
-2002/07/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_auto_install.pm,
-	install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm,
-	printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm,
-	install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new
-	modules.pm
-
-	* c/stuff.xs.pm: adapt to new ldetect
-
-	* modules.pm: reworked, cleaned:
-	  - the list of modules is moved to kernel/list_modules.pm (and a few
-	functions too)
-	  - new "add_probeall" function (similar to "add_alias")
-	  -> used for scsi_hostadapter and usb-interface
-	  - "load_multi" removed in favour of "load" which is now more powerful
-	  - load_thiskind renamed load_category
-	  - get_that_type renamed probe_category
-	  - %modules::drivers dropped (handled for list_modules)
-	still more cleanup to come
-
-	* getpkgs_deps, do_resize_fat: removed since unused
-
-	* Makefile, rescue/make_rescue_img: adapt to the move all.modules ->
-	kernel/all.modules  and  all.kernels -> kernel/all.kernels
-
-	* modparm.pm: rework, cleanup, simplify and make it work
-
-	* install2: create symlink list_modules.pm in current directory for
-	testing purpose
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel"
-	containing:
-	  - all.modules all.kernels update_kernel
-	  - part of perl-install/modules.pm now in kernel/list_modules.pm and
-	kernel/modules.pl
-	  - update_kernel cleaned (it doesn't mention module names anymore, it
-	is now in kernel/modules.pl)
-	  - cleanup Makefile
-	  - mdk-stage1 doesn't depend on perl-install anymore
-	(more precisely mdk-stage1/pci-resource/update-pci-ids.pl)
-
-	* tools/specific_arch: simplified using MDK::Common
-
-	* any.pm: reworked & cleaned the kernel modules part
-	  - adapt to new modules.pm
-	  - adapt to new modparm.pm
-	  - renamed setup_thiskind to load_category
-	  - renamed setup_thiskind_backend to load_category_no_message
-
-	* share/po/Makefile: make the "clean" rule less verbose
-
-2002/07/04  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* harddrake/TODO: add harddrake2 todo list
-
-	* harddrake/data.pm: get rid of 'use vars'
-	remove wait_message hack for printerdraker, better use class_discard
-	harddrake2: "the return of the vengeance son"
-	  - harddrake/data.pm: the data structure
-	  - harddrake/ui.pm: the ui code
-	
-	  - standalone/service_harddrake: the init.d service (which need a few
-	polishing (timeout, ...)
-	
-	  - standalone/harddrake2: the ui caller which need to be dadou/ln -fied
-
-	* harddrake/ui.pm: don't stack signals on config buttons
-	  - remove no more used @pid_launched
-	  - better GUI reactivity: don't wait for config tool to complete, just
-	  "fork and forget" [(c) us air force] and refuse to run another
-	  config tool until the first one to complete
-	print "Running $configurator ..." in status bar while running a config
-	tool
-	  - POSIX is needed for POSIX::wait
-	  - move strict and standalone require at top
-	
-	  - c is unused
-	
-	  - comment exceptions in devices loop (ie skip classes without any
-	  devices or any detector
-	
-	  - optimize away $pid
-	fix move from harddrake.pm to harddrake/data.pm:
-	
-	  - menu does appear
-	
-	  - information fields are translated from raw to english again
-	harddrake2: "the return of the vengeance son"
-	
-	  - harddrake/data.pm: the data structure
-	
-	  - harddrake/ui.pm: the ui code
-	
-	  - standalone/service_harddrake: the init.d service (which need a few
-	polishing (timeout, ...)
-	
-	  - standalone/harddrake2: the ui caller which need to be dadou/ln -fied
-
-	* detect_devices.pm: add tapes() for harddrake2
-
-	* standalone/harddrake2, standalone/service_harddrake: harddrake2: "the
-	return of the vengeance son"
-	  - harddrake/data.pm: the data structure
-	  - harddrake/ui.pm: the ui code
-	
-	  - standalone/service_harddrake: the init.d service (which need a few
-	polishing (timeout, ...)
-	
-	  - standalone/harddrake2: the ui caller which need to be dadou/ln -fied
-
-2002/07/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/probing.c: fixed static definition when non static
-	declaration (gcc limitation).
-	added conditional code around network detection.
-
-2002/07/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mar/mar-extract-only.c, mdk-stage1/minilibc.c,
-	mdk-stage1/newt/newt.c, mdk-stage1/bzlib/bzlib.c,
-	mdk-stage1/newt/listbox.c, mdk-stage1/newt-frontend.c,
-	mdk-stage1/disk.c, mdk-stage1/modules.c, mdk-stage1/stage1.c,
-	mdk-stage1/newt/checkboxtree.c, mdk-stage1/mar/mar-frontend.c,
-	mdk-stage1/Makefile.common, mdk-stage1/url.c, mdk-stage1/newt/textbox.c,
-	mdk-stage1/newt/grid.c, mdk-stage1/dhcp.c, mdk-stage1/init.c,
-	mdk-stage1/automatic.c, mdk-stage1/newt/entry.c: compile with -W
-
-2002/07/02  daouda
-
-	* my_gtk.pm: 
-	  - fill a combo by default :
-	gtkcombo_setpopdown_strings($combo_widget,@strings)
-
-2002/07/02  gbeauchesne
-
-	* c/smp.c: 
-	  - TODO: Update ia64 check with /proc/pal/cpuX ?
-	  - TODO: Update x86_64 check when SMP machines are actually available
-	  - Conditionalize compilation of main() with TEST macro
-
-2002/07/02  Pixel  <pixel@mandrakesoft.com>
-
-	* network/smb.pm: try harder to find the full list of servers available,
-	using "smbclient -L" to
-	check the workgroup masters
-
-2002/07/01  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm (raw_hd_mount_point): nicer default mount point
-
-2002/06/28  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm, network/smb.pm, network/smbnfs.pm: 
-	  - add authentification in diskdrake --smb (esp. for windows NT)
-	  - use "credentials=" to put the passwords
-	(ideas and investigations from Stew Benedict,
-	integrated by Pixel, but need testing)
-	Known bug: if you want to change the password when there are 2 entries
-	in fstab
-	  using the same username=/password=, writing the credentials is done in
-	random order,
-	  => you've got one chance in 2 that the password is changed :-(
-
-	* fs.pm: 
-	  - add authentification in diskdrake --smb (esp. for windows NT)
-	  - use "credentials=" to put the passwords
-	(ideas and investigations from Stew Benedict,
-	integrated by Pixel, but need testing)
-	Known bug: if you want to change the password when there are 2 entries
-	in fstab
-	  using the same username=/password=, writing the credentials is done in
-	random order,
-	  => you've got one chance in 2 that the password is changed :-(
-	handle spaces in mount points and devices (using \040)
-
-2002/06/27  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ, standalone/icons/drakTS.620x57.png: Add
-	drakTermServ application and icon.
-
-2002/06/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, install2.pm: ensure
-	licence step is asked in any case (ie. even when selectLanguage is
-	automatic)
-
-	* any.pm: "my" variables where needed
-
-2002/06/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po, share/po/ar.po: Updated po files
-
-2002/06/19  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* Makefile: corrected rules to make distributable rpms.
-
-2002/06/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* patch/patch-oem-hp.pl: added patch-oem.pl file used to generate HP
-	Mandrake Linux 8.2.
-
-2002/06/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: remove a few drivers so that hd.img and network.img are
-	possible with latest BOOT kernel
-
-2002/06/19  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/fileshareset: use "wide links = no" for exporting via samba
-	(thanks to Jan Sch�fer)
-
-	* fs.pm: mounting of ntfs after install really mount the partition (thanks
-	to Buchan Milne)
-
-2002/06/18  daouda
-
-	* my_gtk.pm: 
-	  - add gtkset_text, gtkprepend_text, gtkappend_text for entry widgets
-
-2002/06/18  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* Makefile.drakxtools: manage security subdir.
-
-	* Makefile: added targets to build test and distribution rpms and srpms
-	(localrpm,
-	localsrpm, rpm, srpm).
-	added security to the installed directories
-
-	* pam.net_monitor, diskdrake/diskdrake.html, drakxtools.spec,
-	apps.net_monitor: ripped from the srpm
-
-2002/06/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-2002/06/17  cbelisle
-
-	* standalone/draksec: added server, user and network advanced options
-
-	* any.pm: draksec: customize entries for each options (lists, checkboxes
-	and text boxes)
-	Added user,server and network advanced options
-
-	* security/msec.pm: 
-	  - Customize entries for each options (checkboxes, text boxes and
-	lists)
-	added network, server and user advanced options
-
-2002/06/15  alus
-
-	* share/po/pl.po: updates
-
-2002/06/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: Catalan doesn't have French fallback anymore
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/06/11  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm: added /tmp in @suggestions_mntpoints (as suggested by
-	Philippe Coulon)
-
-2002/06/10  cbelisle
-
-	* standalone/draksec: Add an entry for the security user email
-
-	* security/msec.pm: Initial commit
-
-	* any.pm: Add security user email entry in draksec
-
-2002/06/10  daouda
-
-	* network/tools.pm: 
-	  - choose country according to timezone.
-
-2002/06/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/syncrpms: english fix
-
-2002/06/10  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm: s/class/class_/ for ldetect 0.4
-
-2002/06/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* timezone.pm: remove duplicate entry in ntp_servers
-
-	* interactive_gtk.pm, my_gtk.pm: split ask_browse_tree_info from
-	interactive_gtk
-	to my_gtk between widgets creation and real
-	stuff so that we can now call it with widgets
-	places differently
-
-2002/06/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated po file
-
-2002/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: adapt to new lilo
-
-2002/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs
-
-	* bootloader.pm: adapt to new lilo
-
-2002/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs
-
-2002/06/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm,
-	install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english
-	fixes thx to vincent meyer
-
-2002/06/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style
-	instead of weird style
-	with clearall unset & auto_allocate set
-
-2002/05/29  alus
-
-	* share/po/pl.po: little fixes
-
-2002/05/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_gtk.pm: remove typo fix when it's not a fix :-)
-	small typo
-	remove typo (hopefully really a typo ;p)
-
-	* any.pm: be a bit more polite
-
-2002/05/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: make sure patch is always read after defcfg to take
-	precedance.
-
-2002/05/27  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: have usb-interface1 for ehci-hcd
-
-2002/05/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* Xconfigurator.pm: dams fixes a bug in the install :-)
-
-2002/05/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: xtraceroute needs 3d
-
-2002/05/15  alus
-
-	* share/po/Changelog: info about polish translation
-
-2002/05/14  alus
-
-	* share/po/pl.po: polish finished
-	updated polish translation
-	polish updated to near finished. Fuzzy removed and checked
-
-2002/05/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* docs/HACKING: libncurses* also for the sucking neuneux
-
-2002/05/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pl.po, share/po/id.po: updated po file
-
-2002/05/13  alus
-
-	* share/po/pl.po: mostly finished polish translation.!!
-
-2002/05/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* docs/HACKING: libbzip2* and more explanations about failing compilation
-
-	* mdk-stage1/Makefile, mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/probing.c:
-	adapt to gcc-3.1
-
-2002/05/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: Put back xcin as default XIM for zh_TW.Big5
-
-	* share/po/eu.po: small corrections
-
-2002/04/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/usb-resource/update-usb-ids.pl: support USB2 controllers as
-	well
-
-2002/04/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po, share/po/hu.po: updated po files
-
-2002/04/26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed some machine with two present i830 CGC but only
-	one in reality.
-
-	* detect_devices.pm: updated usbMice to take care of device declared as
-	Mouse:USB in usbtable (was
-	not the case !)
-
-2002/04/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/04/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* bootlook.pm: a few english fixes
-
-	* any.pm: fixes
-	english fixes from v meyer
-	a few english fixes thx to vincent meyer
-
-2002/04/19  alus
-
-	* share/po/pl.po: It's only about 100 entries to the end
-
-2002/04/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-	* share/po/hu.po: updated po file
-
-2002/04/18  alus
-
-	* share/po/pl.po: 3 more long messages
-	one entry
-	stil working....
-
-2002/04/17  alus
-
-	* share/po/pl.po: Mostly finished polish translation
-	translations, fixes etc...
-
-2002/04/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: final candidate.
-
-	* rescue/tree/etc/oem: final candidate.
-	add gcc-cpp to oem install.
-
-2002/04/16  alus
-
-	* share/po/pl.po: still working
-	Few fixes
-	Updated translation. Many strings is not yet translated...
-
-2002/04/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: sync with oem-prepare
-	fixed stupid error.
-	forget packdrake module invocation.
-	fixed to support non standard rpm filename.
-
-	* tools/oem-prepare: add gcc-cpp to always installed.
-	disable unselection of some package (gmc, all gcc3.0 stuff).
-
-2002/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: only main version of automake
-
-2002/04/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated po file
-
-2002/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server
-	dialog box
-
-2002/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: ipchains now conflicts with iptables
-
-2002/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: Another small fix
-	Small corrections
-
-2002/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ro.po: merged with drakfloppy strings
-
-2002/04/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/mt.po: updated Maltese file
-
-2002/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: small typo correction
-
-2002/04/10  warly
-
-	* share/rpmsrate: autofs -> 2
-
-2002/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains
-	and iptables
-	packages conflict
-
-2002/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_dos.pm, partition_table_gpt.pm,
-	partition_table_empty.pm, partition_table_bsd.pm,
-	partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic"
-	error message (thanks to Brian J. Murrell)
-
-2002/04/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fixed a bunch of things
-
-	* install_steps_interactive.pm, install_interactive.pm, network/isdn.pm,
-	partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm,
-	printerdrake.pm, network/tools.pm, diskdrake/interactive.pm,
-	network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm,
-	network/network.pm, printer.pm, interactive_stdio.pm: fix a few english
-	strings
-
-2002/04/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with
-	drakfloppy strings
-
-2002/04/07  Yves Duret <yduret@mandrakesoft.com>
-
-	* standalone/drakfloppy: moving from his own rpm to drakxtools
-
-	* Makefile.config: add drakfloppy to STANDALONEPMS_
-
-2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/04  sdupont
-
-	* standalone/drakbackup: please yduret, do not commit these changes on cvs
-	before to test it.
-	you can say "bugs fixes" only if you have corrected  some errors but not
-	if you create it!
-	the backup on cd was disabled because the backend is not available for
-	moment.
-
-	* standalone/drakfont: remove uninteresting yduret changes,
-	would it be possible to know what are your "bugs fixies" ?
-	to yduret: I'm the creator of this program so please do not remove my
-	changes.
-
-2002/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs
-
-2002/06/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm,
-	install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english
-	fixes thx to vincent meyer
-
-2002/06/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style
-	instead of weird style
-	with clearall unset & auto_allocate set
-
-2002/05/29  alus
-
-	* share/po/pl.po: little fixes
-
-2002/05/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_gtk.pm: remove typo fix when it's not a fix :-)
-	small typo
-	remove typo (hopefully really a typo ;p)
-
-	* any.pm: be a bit more polite
-
-2002/05/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: make sure patch is always read after defcfg to take
-	precedance.
-
-2002/05/27  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: have usb-interface1 for ehci-hcd
-
-2002/05/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* Xconfigurator.pm: dams fixes a bug in the install :-)
-
-2002/05/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: xtraceroute needs 3d
-
-2002/05/15  alus
-
-	* share/po/Changelog: info about polish translation
-
-2002/05/14  alus
-
-	* share/po/pl.po: polish finished
-	updated polish translation
-	polish updated to near finished. Fuzzy removed and checked
-
-2002/05/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* docs/HACKING: libncurses* also for the sucking neuneux
-
-2002/05/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pl.po, share/po/id.po: updated po file
-
-2002/05/13  alus
-
-	* share/po/pl.po: mostly finished polish translation.!!
-
-2002/05/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* docs/HACKING: libbzip2* and more explanations about failing compilation
-
-	* mdk-stage1/Makefile, mdk-stage1/probing.c: adapt to gcc-3.1
-
-2002/05/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: Put back xcin as default XIM for zh_TW.Big5
-
-	* share/po/eu.po: small corrections
-
-2002/04/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po, share/po/hu.po: updated po files
-
-2002/04/26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed some machine with two present i830 CGC but only
-	one in reality.
-
-	* detect_devices.pm: updated usbMice to take care of device declared as
-	Mouse:USB in usbtable (was
-	not the case !)
-
-2002/04/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/04/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* bootlook.pm: a few english fixes
-
-	* any.pm: fixes
-	english fixes from v meyer
-	a few english fixes thx to vincent meyer
-
-2002/04/19  alus
-
-	* share/po/pl.po: It's only about 100 entries to the end
-
-2002/04/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-	* share/po/hu.po: updated po file
-
-2002/04/18  alus
-
-	* share/po/pl.po: 3 more long messages
-	one entry
-	stil working....
-
-2002/04/17  alus
-
-	* share/po/pl.po: Mostly finished polish translation
-	translations, fixes etc...
-
-2002/04/16  alus
-
-	* share/po/pl.po: still working
-	Few fixes
-	Updated translation. Many strings is not yet translated...
-
-2002/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: only main version of automake
-
-2002/04/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated po file
-
-2002/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server
-	dialog box
-
-2002/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: ipchains now conflicts with iptables
-
-2002/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: Another small fix
-	Small corrections
-
-2002/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ro.po: merged with drakfloppy strings
-
-2002/04/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/mt.po: updated Maltese file
-
-2002/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: small typo correction
-
-2002/04/10  warly
-
-	* share/rpmsrate: autofs -> 2
-
-2002/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains
-	and iptables
-	packages conflict
-
-2002/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_dos.pm, partition_table_gpt.pm,
-	partition_table_empty.pm, partition_table_bsd.pm,
-	partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic"
-	error message (thanks to Brian J. Murrell)
-
-2002/04/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fixed a bunch of things
-
-	* install_steps_interactive.pm, install_interactive.pm, network/isdn.pm,
-	partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm,
-	printerdrake.pm, network/tools.pm, diskdrake/interactive.pm,
-	network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm,
-	network/network.pm, printer.pm, interactive_stdio.pm: fix a few english
-	strings
-
-2002/04/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with
-	drakfloppy strings
-
-2002/04/07  Yves Duret <yduret@mandrakesoft.com>
-
-	* standalone/drakfloppy: moving from his own rpm to drakxtools
-
-	* Makefile.config: add drakfloppy to STANDALONEPMS_
-
-2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/04  sdupont
-
-	* standalone/drakbackup: please yduret, do not commit these changes on cvs
-	before to test it.
-	you can say "bugs fixes" only if you have corrected  some errors but not
-	if you create it!
-	the backup on cd was disabled because the backend is not available for
-	moment.
-
-	* standalone/drakfont: remove uninteresting yduret changes,
-	would it be possible to know what are your "bugs fixies" ?
-	to yduret: I'm the creator of this program so please do not remove my
-	changes.
-
-2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: setting /etc/sysconfig/msec for chkconfig which
-	doesn't use $ENV{SECURE_LEVEL} anymore
-
-2002/04/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: setting /etc/sysconfig/msec for chkconfig which
-	doesn't use $ENV{SECURE_LEVEL} anymore
-
-2002/04/02  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: do not have "root=" with no root (needed for memtest)
-	(thanks to Borsenkow Andrej)
-
-	* share/rpmsrate: add tmpwatch (since it is not mandatory any more)
-
-2002/03/30  Yves Duret <yduret@mandrakesoft.com>
-
-	* standalone/drakbackup, standalone/drakfont: bugs fixes, code clean up,
-	more mdkish..
-
-2002/03/26  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Fixed several problems related to HP
-	multi-function devices:
-	  - Parallel multi-function devices worked only on the first (onboard)
-	parallel
-	port.
-	  - HP LaserJet 2200 needs HPOJ for printing via USB.
-	  - For the HP OfficeJet D series the scanning instructions were not
-	shown.
-	  - HPOJ does not work with HP PhotoSmart 10xx, 11xx, and 12xx.
-
-2002/03/22  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: cleaned gtkpowerpack
-
-2002/03/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: use /root rather than /tmp for some temp files (security
-	suxx)
-
-2002/03/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/list: rpm 4.0.4
-
-	* mdk-stage1/network.c: don't save DHCP_HOSTNAME if the value is void
-
-2002/03/20  sdupont
-
-	* standalone/drakfont: fixing problems
-	exchanging: ttmkfdir by  /usr/X11R6/bin/mkttfdir
-	which generate correct fonts.dir
-
-	* standalone/drakbackup: remove backup on cd
-
-2002/03/20  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* standalone/drakxtv: use log for what is not related to explanations
-
-2002/03/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/updatehdlist: take care of commercial medium (not syncable).
-
-2002/03/19  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* standalone/drakxtv: 
-	  - default tv norm is pal rather than ntsc (because of alphabetical
-	sort) since it's the most used tv norm
-	  - figure out tv norm & country (aka frequency table) from locales
-	
-	  - add a hash based on lang in order to do this
-	
-	  - add --no-guess if one doesn't want drakxtv to automagically guess tv
-	  norm and geographic area through locales (lang.pm)
-	
-	  - log with standalone::explanations:
-	
-		 - guessed values from locales: language, tv norm and country
-	
-		 - runned command to scan for tv channels
-	
-	  	 - ~/.xawtv creation
-	
-	
-	  - s/bcast/broadcast/ in displayed messages
-	
-	  - add -h and --help support
-
-2002/03/18  dam's  <damien@mandrakesoft.com>
-
-	* install_gtk.pm, mouse.pm, my_gtk.pm: corrected create_xpm API
-
-2002/03/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: fixed to support rpm filename incoherent to standard
-	naming for commercial
-	packages (commercial are *really* shit (almost, for the hope) all the
-	time ?)
-
-2002/03/16  dam's  <damien@mandrakesoft.com>
-
-	* network/ethernet.pm: we now consider dhcp provide GATEWAY and internet
-	connection.
-
-2002/03/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/ar.po: updated po file
-
-2002/03/16  Pixel  <pixel@mandrakesoft.com>
-
-	* network/ethernet.pm: small cleanup on untested code (need testing:)
-
-2002/03/16  dam's  <damien@mandrakesoft.com>
-
-	* network/ethernet.pm: we now consider dhcp provide GATEWAY and internet
-	connection.
-
-2002/03/16  Pixel  <pixel@mandrakesoft.com>
-
-	* network/ethernet.pm: small cleanup on untested code (need testing:)
-
-2002/03/15  fabman
-
-	* share/po/es.po: updated bad lilo/grub/yaboot translation
-	updated spanish translations
-
-2002/03/15  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: force mkinitrd *really* for bootsplash.
-	force initrd regeneration for oem on some case (maybe the cause of
-	bootsplash
-	perturbation, as maintainer don't even known why it is running correctly
-	:-)
-
-	* pkgs.pm: do not try to get synthesis if hdlist is available as an handle
-	on file (typical
-	for updates).
-
-	* share/rpmsrate: remove doublon on NVIDIA_nforce.
-	update to 6mdk for NVIDIA_nforce*
-
-2002/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: yet again add some dropped entities from drakx-help.xml
-	add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux;
-
-	* install_steps_interactive.pm: 
-	  - remove obsolete code
-	  - the result is to use directly $availableC instead $size2install
-	which was min($availableC, $max_size)
-
-2002/03/15  dam's  <damien@mandrakesoft.com>
-
-	* share/po/ja.po: reverted ' \n' from pablo because I managed to correct
-	the way we wrap for the advertising
-
-	* install_steps_gtk.pm: submitting widget instead of style (style/font
-	initialization bug from gtk
-
-	* my_gtk.pm: corrected get_text_coord : widget instead of style, and
-	handling of ugly language (/ja|zh/)
-
-2002/03/15  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: do not try to get synthesis if hdlist is available as an handle
-	on file (typical
-	for updates).
-
-	* rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
-	@euro appended for 8.1).
-
-2002/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
-	ones
-
-2002/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: yet again add some dropped entities from drakx-help.xml
-	add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux;
-	s/Linux Mandrake/Mandrake Linux/ (from the drakx-help.xml not merged)
-
-	* keyboard.pm (unpack_keyboards): return undef on error
-
-2002/03/15  dam's  <damien@mandrakesoft.com>
-
-	* share/po/ja.po: reverted ' \n' from pablo because I managed to correct
-	the way we wrap for the advertising
-
-	* install_steps_gtk.pm: submitting widget instead of style (style/font
-	initialization bug from gtk
-
-	* my_gtk.pm: corrected get_text_coord : widget instead of style, and
-	handling of ugly language (/ja|zh/)
-
-2002/03/15  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
-	@euro appended for 8.1).
-
-2002/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
-	ones
-
-2002/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the
-	drakx-help.xml not merged)
-
-	* keyboard.pm (unpack_keyboards): return undef on error
-
-2002/03/15  dam's  <damien@mandrakesoft.com>
-
-	* share/po/ja.po: reverted ' \n' from pablo because I managed to correct
-	the way we wrap for the advertising
-
-	* install_steps_gtk.pm: submitting widget instead of style (style/font
-	initialization bug from gtk
-
-	* my_gtk.pm: corrected get_text_coord : widget instead of style, and
-	handling of ugly language (/ja|zh/)
-
-2002/03/15  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
-	@euro appended for 8.1).
-
-2002/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
-	ones
-
-2002/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the
-	drakx-help.xml not merged)
-
-	* keyboard.pm (unpack_keyboards): return undef on error
-
-2002/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po: updated po file
-
-2002/03/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakxtv: english
-
-2002/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/da.po, share/po/no.po: updated po files
-
-	* share/po/eu.po: updated po file
-
-	* lang.pm: changed LANGUAGE for basque
-
-	* share/po/ja.po: added \n in advertising
-
-2002/03/14  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: CHARSET"iso-8859-1" and CHARSET"iso-8859-15" is no good
-	for english which has CHARSET"C", adding it
-
-	* share/rpmsrate.server: obsolete
-
-2002/03/14  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* standalone/drakxtv: 
-	  - add SECAM to france description to ease user comprehension
-	  - remove unused variables
-	  - revert gc & dam's (also known as the usual suckers) garbage
-	  who'ven't the hardware to test:
-	
-		- explain in source why we don't try to install xawtv (see below)
-	
-		- just display a message if xawtv isn't installed
-		  since drakx should have installed it
-	
-		- let it be runned as root again (how many times i'm
-		  supposed to restore this behaviour)
-	
-		- retest with a tv card
-	
-	  - use %ENV rather than relying on shell ~ expansion
-	
-	  - if tv card wasn't detected, ask the user to spam us
-	
-	  - factorize $in->exit() out of scan4tvchannels()
-	
-	  - add to TODO list the possibility to install xawtv if needed
-	
-	  - check scantv return value and display an error message
-	
-	  - also if the wrapper was runned on console, display a nice
-	  message saying one can now run xawtv under X11
-
-2002/03/14  warly
-
-	* share/rpmsrate: add commercial apps
-
-2002/03/14  Yves Duret <yduret@mandrakesoft.com>
-
-	* standalone/logdrake: fix some bug
-	fix * bug in field matching/ not matching
-
-2002/03/13  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: new gfx
-
-2002/03/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: sync with oem (removed mach32 server).
-	sync with oem.
-	remove bzflag.
-	synced with oem script.
-
-	* rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too.
-	remove Mach8 and Mono driver for oem only.
-	remove bzflag.
-	fixed closure selection on sub groups (like 3D),
-	moved some big package out of oem,
-	minor fixes.
-
-2002/03/13  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: new gfx
-
-2002/03/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: sync with oem (removed mach32 server).
-	sync with oem.
-	remove bzflag.
-	synced with oem script.
-
-	* rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too.
-	remove Mach8 and Mono driver for oem only.
-	remove bzflag.
-	fixed closure selection on sub groups (like 3D),
-	moved some big package out of oem,
-	minor fixes.
-
-2002/03/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po, share/po/eu.po: updated po files
-
-2002/03/13  warly
-
-	* share/rpmsrate: add aspell-fr and en for gabber require
-
-2002/03/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed closure selection on sub groups (like 3D),
-	moved some big package out of oem,
-	minor fixes.
-
-	* tools/oem-prepare: synced with oem script.
-
-2002/03/13  gbeauchesne
-
-	* share/rpmsrate: 
-	  - Add openoffice with weight = 2
-
-2002/03/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po, share/po/vi.po, share/po/cs.po, share/po/hu.po,
-	share/po/eu.po: updated po files
-
-	* lang.pm: small console font changes
-	set default console fotns for latin1/0 to lat1-16 and lat0-16;
-	the font lat0-sun16 is missing some chars of iso-8859-1/15 !
-
-2002/03/13  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: add gcc and gcc-c++ in @preferred
-
-2002/03/13  warly
-
-	* share/rpmsrate: add aspell-fr and en for gabber require
-
-2002/03/12  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: onboot option only in expert mode
-	corrected domainname bug; added onboot option
-
-2002/03/12  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakbackup, standalone/drakfont: minor bug correction
-
-	* standalone/net_monitor: greater timeout
-
-	* network/tools.pm, network/netconnect.pm: changed timeout for testing
-	internet connection
-
-2002/03/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: remove synthesis if not found (filesize is 0)
-
-	* Xconfigurator.pm: avoid Utah GLX only if > 800MB, not if <= 800MB (!)
-
-	* install_any.pm: added fix to support update hdlist renaming (ie hdlist
-	of update are always hdlist.cz).
-	remove old synthesis file, to make sure gzip can build a new one.
-
-	* share/rpmsrate: added nforce support (hack by adding kernel version
-	inside)
-
-2002/03/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-	* share/po/ga.po: fixed email address
-
-	* share/po/zh_TW.po: updated po file
-
-2002/03/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, bootloader.pm: don't have "quiet" boot in the server
-	meta_class
-
-	* pkgs.pm: "fam" is not a naughtyServers
-	remove the old "boa" comment
-	adapt naughtyServers for 8.2
-
-2002/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: a few missing translations
-
-2002/03/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt.po, share/po/ga.po, share/po/de.po, share/po/az.po,
-	share/po/pt_BR.po, share/po/nl.po, share/po/ja.po, share/po/id.po,
-	share/po/ar.po, share/po/mt.po, share/po/eo.po, share/po/da.po: updated
-	po files
-
-	* share/po/eu.po, share/po/it.po: updated po files
-	merged with new strings from manuals
-
-	* share/po/DrakX.pot, share/po/fr.po: merged with new strings from manuals
-
-	* share/po/be.po, share/po/bg.po, share/po/et.po, share/po/hr.po,
-	share/po/ko.po, share/po/is.po, share/po/pl.po, share/po/no.po,
-	share/po/fi.po, share/po/el.po, share/po/lt.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/bs.po,
-	share/po/cs.po, share/po/af.po: updated po files (finished merging with
-	manual strings)
-	updated po files
-
-	* share/po/hu.po: updated po files
-	updated po files
-
-	* share/po/cy.po: updated po file
-	updated po files
-
-	* share/po/es.po: updated Spanish
-
-	* share/po/sp.po, share/po/zh_CN.po, share/po/sr.po, share/po/tr.po,
-	share/po/ru.po, share/po/wa.po, share/po/sv.po, share/po/th.po,
-	share/po/sk.po, share/po/sl.po, share/po/vi.po, share/po/uk.po,
-	share/po/ro.po, share/po/zh_TW.po: updated po files (finished merging
-	with manual strings)
-
-2002/03/11  dam's  <damien@mandrakesoft.com>
-
-	* Makefile.config: added drakproxy
-
-	* standalone/drakxtv: added embedded mode
-
-2002/03/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: for updates, make tree as flat instead in order to
-	see all packages.
-
-2002/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: webmin: 3
-
-	* standalone/drakxtv: 
-	  - install xawtv when necessary instead of
-	telling people to use urpmi (titi sucks)
-	  - prints out a message when no tv card
-	has been detected
-
-	* share/po/fr.po: small ortograf
-
-2002/03/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po, share/po/it.po, share/po/eu.po: merged with new strings
-	from manuals
-
-	* share/po/DrakX.pot: merged with new strings from manuals
-	updated GErman file
-
-	* share/po/de.po: updated GErman file
-
-	* share/po/es.po: updated Spanish
-
-2002/03/11  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (fullname2mouse): workaround when "1 Button" is not found
-
-	* install_steps.pm, install2.pm: 
-	  - default security level now set in miscellaneousBefore
-	  - default security level is 3 in meta_class server
-
-	* install_any.pm: 
-	  - fix the setting of compssUsersChoices in auto_install when it is
-	empty
-	  - set the default compssUsersChoices adapted to the server meta_class
-
-	* share/rpmsrate: remove phpgroupware from OFFICE (since it appeas twice,
-	the rate is 4, and it requires apache, and ...)
-
-	* Makefile: upload the various compssUsers* (esp. compssUsers.server)
-
-	* install_steps_gtk.pm: 
-	  - remove the hack for not displaying Utilities in classic meta_class
-	  - new compssUsers groups for the server meta_class
-
-	* share/compssUsers: remove "Utilities" here instead of removing it
-	hackily in install_steps_gtk
-
-	* share/compssUsers.server: fix the path=Utilities for the Utilities
-	section
-
-2002/03/11  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Small text fix.
-	Security fix: Give a warning that SMB passwords can easily be revealed
-	by normal users when printing on a Windows-hosted printer is set up.
-
-	* detect_devices.pm: Reverted parts of the last change, they broke in
-	non-DevFS environments (e. g. during installation).
-
-2002/03/11  warly
-
-	* share/rpmsrate: add bwbserver_linux in rpmsate for BeeWeb server
-
-	* share/compssUsers.server: remove ICEWM choice
-
-2002/03/11  Yves Duret <yduret@mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: added yduret entry in user.
-
-2002/03/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: add Rage Mobility as bad card for XF4 (was already bad
-	card for XF3) (g�g� report).
-
-2002/03/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help file
-
-	* share/po/de.po, share/po/DrakX.pot: updated GErman file
-
-2002/03/11  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/interactive.pm (Mount_point): when files exist in the chosen
-	mount point, propose migration
-
-	* install_steps_interactive.pm: search /commercial/i instead of
-	/Application/ before showing the commercial license
-
-	* standalone/drakboot, bootloader.pm: fix Stew sucks
-
-	* install2.pm, install_steps.pm: 
-	  - default security level now set in miscellaneousBefore
-	  - default security level is 3 in meta_class server
-
-	* install_steps_gtk.pm: 
-	  - remove the hack for not displaying Utilities in classic meta_class
-	  - new compssUsers groups for the server meta_class
-	search /commercial/i instead of /Application/ before showing the
-	commercial license
-
-	* install_any.pm: 
-	  - fix the setting of compssUsersChoices in auto_install when it is
-	empty
-	  - set the default compssUsersChoices adapted to the server meta_class
-
-	* Makefile: upload the various compssUsers* (esp. compssUsers.server)
-
-	* share/compssUsers: remove "Utilities" here instead of removing it
-	hackily in install_steps_gtk
-
-	* share/compssUsers.server: fix the path=Utilities for the Utilities
-	section
-
-2002/03/11  yduret
-
-	* standalone/scannerdrake: re-re-re-re-re-re-uncomment the pkgs check
-	line.
-
-2002/03/10  chipaux
-
-	* share/po/fr.po: Corrected few typo mistakes.
-
-2002/03/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps.pm: gcize damienization
-
-	* share/rpmsrate: put userdrake together with drakconf so that
-	userdrake is not missing (till)
-
-2002/03/10  siegel
-
-	* share/po/help_xml2pm.pl: added tag filename
-
-	* any.pm: added missing i18n _()
-
-	* share/po/de.po: update
-	and still fixes ...
-	updates
-	update
-
-2002/03/10  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Protect the Star Office/OpenOffice.org configuration against
-	manual changing of the "update-alternatives" assignment of the "lpr"
-	command.
-
-	* detect_devices.pm: Made USB printer auto-detection more stable and
-	reliable.
-
-2002/03/10  yduret
-
-	* standalone/scannerdrake: added ASK DEVICE support
-
-	* scanner.pm: added ASK support for more interactiveness during
-	configuration
-
-2002/03/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: comply better to ClientID stuff
-
-2002/03/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated po file
-
-2002/03/09  yduret
-
-	* standalone/scannerdrake: added sum up at the end
-	uncomment line that checks if sane rpm is installed or not (thx gc).
-	i sux,
-
-2002/03/08  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakproxy: drakproxy rewritten
-	working drakproxy
-
-	* install_steps.pm: corrected network up/down when network install
-
-	* standalone/drakfont: ergonomy changed to fit in mcc
-	corrected network up/down when network install
-
-	* network/network.pm: proxy settings corrected
-
-2002/03/08  fabman
-
-	* share/po/es.po: updated spanish translation
-
-2002/03/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed allowNVIDIA_rpms to take care of new kernel naming
-	conventions.
-
-	* standalone/XFdrake: fixed NVIDIA support to use newer kernel naming
-	conventions.
-
-	* Xconfigurator.pm: fixed possible additional XFree packages not installed
-	if server is already
-	installed.
-
-2002/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: missing translations + a few changes
-
-	* mdk-stage1/probing.c: have 4 seconds of delay for usb stuff
-	to show up rather than seconds
-
-2002/03/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po, share/po/it.po: updated po files
-
-	* share/po/es.po: corrected typo
-
-	* share/po/da.po: updated Danish file
-
-	* lang.pm, share/locales-skeleton.tar.bz2: Added symlinks in
-	locales-skeleton so non primary chinese encodings
-	can work
-
-	* share/po/ar.po: updated po file
-
-	* share/po/cy.po: removed the "translation" of licence, it was random
-	text.
-
-2002/03/07  dam's  <damien@mandrakesoft.com>
-
-	* share/po/fr.po, modparm.pm: corrected
-
-2002/03/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/newt-frontend.c: english fix thx to till & phil
-
-2002/03/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po: updated po file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2002/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: removing quota choices for reiserfs
-
-2002/03/07  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: make gc happy
-
-	* modparm.pm, share/po/fr.po: corrected
-
-	* standalone/draknet: corrected network/internet restart when already
-	connected
-
-	* network/netconnect.pm: corrected bad previous behaviour
-
-	* standalone/drakfont: corrected bad system command
-
-	* share/advertising/02-internet_icon.png,
-	share/advertising/05-contcenter_icon.png,
-	share/advertising/10-MDKexpert_icon.png, share/advertising/06-user.pl,
-	share/advertising/08-games.pl, share/advertising/02-internet.pl,
-	share/advertising/03-graphic_icon.png, share/advertising/07-server.pl,
-	share/advertising/12-MDKstore_icon.png,
-	share/advertising/06-user_icon.png,
-	share/advertising/07-server_icon.png, share/advertising/09-MDKcampus.pl,
-	share/advertising/10-MDKexpert.pl, share/advertising/05-contcenter.pl,
-	share/advertising/04-develop.pl,
-	share/advertising/09-MDKcampus_icon.png,
-	share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl,
-	share/advertising/04-develop_icon.png,
-	share/advertising/08-games_icon.png: changed icon sizes
-
-2002/03/07  fcrozat
-
-	* share/rpmsrate: Evolution is not dependent on GNOME selection (not
-	require gnome-core)
-
-2002/03/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: avoid destroying some files in /etc.
-
-	* install_steps_interactive.pm: fixed package tree with a given medium.
-
-	* any.pm: fix autologin sometimes activated without user intervention.
-
-2002/03/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: generate_automatic_stage1_params: also save
-	the interface number in case the machine will
-	have several interfaces; clean code a bit
-
-	* mdk-stage1/network.c: better error msg regarding pcmcia net
-	adapters supported either with pcmcia.img
-	or network.img (amaury sucks)
-
-	* install_steps_auto_install.pm: in replay mode, since
-	$o->{interactiveSteps}
-	exists, we can't simply ||= @graphical_steps,
-	we need to push to ensure that the
-	@graphical_steps is always honoured
-
-	* standalone/drakgw: 
-	  - call net_monitor to disable internet
-	connection before network-restart
-	  - user return value when status'ing the
-	  initscripts rather than grepping their
-	  text output
-
-	* modules.pm: try to avoid segfaulting probeall stuff
-	add ns83820 gigabit (goes to other.img)
-
-	* rescue/rescue-doc: english fixes thx to phil
-
-2002/03/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* standalone/drakfont: Added a missing _( ) around a text
-
-	* share/po/vi.po, share/po/cy.po, share/po/hu.po, share/po/id.po: updated
-	po files
-
-	* share/po/ko.po, share/po/ca.po, share/po/tr.po: commented out the
-	translations using argument switching (not yet handled by DrakX)
-
-	* bootlook.pm, standalone/drakboot: i18n changes
-
-	* keyboard.pm: corrected the locale->keyboard list building
-	make keyboard selection choose first the 5 first chars of lang;
-	then the 2 first chars;
-
-	* share/po/eu.po: commented out the translations using argument switching
-	(not yet handled by DrakX)
-	updated po file
-
-2002/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix fileshare custom config
-	fix *some* stew errors
-
-	* bootloader.pm: "--timeout=" must be after terminal
-	add --timeout=... for "terminal serial ..." line in grub's menu.lst
-	fix *some* stew errors
-
-	* install_any.pm: don't have the adsl & modem passwords in report.bug
-
-	* detect_devices.pm (zips__faking_ide_scsi): fix returned value in
-	standalone
-	(getSCSI): don't call isFloppyOrHD for ZIPs (lowers the number of kernel
-	error when there is no floppy)
-
-	* fs.pm: removing quota choices for reiserfs
-
-2002/03/07  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* any.pm, bootlook.pm, standalone/drakboot, bootloader.pm: drakboot
-	functionality for PPC
-
-2002/03/07  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed bug of network not being started by Printerdrake
-	during installation.
-
-2002/03/07  warly
-
-	* share/compssUsers.server, share/compssUsers, share/rpmsrate: update
-	server, merge with normal rpmsrate
-
-2002/03/06  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakautoinst: corrected HASH and ARRAY label
-
-2002/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po, share/po/no.po, share/po/cy.po: updated po file
-
-2002/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/fileshareset (nfs_exports::update_server): ensure portmap is
-	running
-
-2002/03/06  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: corrected font stuff
-
-	* standalone/drakautoinst: corrected HASH and ARRAY label
-
-2002/03/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: no 3D with Utah GLX (XF 3.3) if more than 800 MB.
-
-	* pkgs.pm: fixed error when using multiple removable media and user
-	aborted installation
-	(for some other error) and hdlists cannot be retrieved.
-	add save of synthesis too when partitions are reformated, so that urpmi
-	is happy after.
-	fixed when hdlist gives no new package (new name) but only obsoleted
-	package or
-	updated package, ie security updates may appreciate.
-
-	* install_any.pm: update for newer pkgs module (fix for abort during
-	installation).
-
-	* rescue/tree/etc/oem: allow oem script to be executable from standard cd
-	set (powerpack or other).
-
-2002/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po: updated po file
-	updated pot file
-
-	* share/po/fr.po, share/po/cy.po, share/po/id.po, share/po/zh_TW.po:
-	updated pot file
-	updated some po files
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2002/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: add @preferred libxpm4
-
-	* lang.pm: fix typo in %xim (for chineese)
-	  - create the kde share/config's directory, so that kde config files
-	are created in any case
-	  - in user_only localedrake, ensure the /etc/sysconfig/i18n is taken
-	into account when ~/.i18n doesn't exist (thanks to F.Crozat)
-
-	* install_any.pm: ensure the fstab is kept on upgrade
-	(g_auto_install): use "interactiveSteps" field instead of pushing in
-	@install_steps_auto_install::graphical_steps
-
-	* standalone/localedrake: when called by kcontrol with --apply, don't
-	modify kde config files, kcontrol takes care of it more nicely
-
-	* diskdrake/interactive.pm: translate the actions
-	choose to activate crypto. type password. unselect encryption. Select
-	encryption again, you were not asked for password. Fixed
-	use formatError
-
-	* bootloader.pm (add_append): don't add to entries of type 'other'
-
-	* devices.pm (find_free_loop): fix
-
-	* install_steps_interactive.pm, install_steps.pm: ensure the fstab is kept
-	on upgrade
-
-	* fsedit.pm: do not allow encrypted /var
-
-2002/03/06  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* standalone/drakxtv: print an error message if xawtv isn't installed
-	fix conflict between i18n and complete signal handler (ie return key
-	and not value)
-
-2002/03/06  warly
-
-	* share/rpmsrate: remove abiword
-
-2002/03/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pcmcia_/probe.c: an old sucking PCI card needs oldskool
-	i82365 :-((, ugly patch
-
-2002/03/05  warly
-
-	* share/rpmsrate: add Fred Bastok modif
-	remove too many duplicate in i18n packages that are now automatically
-	added
-
-2002/03/05  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* modules.pm: Add USB2 controller
-
-2002/03/05  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: corrected expert option in install mode
-	added expert mode
-
-	* my_gtk.pm: greater interstice
-
-	* modparm.pm: cosmetic
-	gzipped modules handled
-
-2002/03/05  fcrozat
-
-	* share/rpmsrate: Install xlockmore when installing gnome, since
-	xscreensaver can't lock
-	root desktop..
-
-2002/03/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: deactivate v4l module if DRI is enabled and r128
-	driver used.
-
-	* install_steps.pm: added auto restore of some files (/etc/profile) needed
-	by upgrade (from .rpmnew).
-	added log for hasNetwork (so that we can understand why installUpdates
-	do nothing).
-
-	* crypto.pm: avoid trying to find hdlist-updates.cz in existing medium
-	(instead of ftp one).
-
-	* fs.pm: fixed hd install to allow using specific directory.
-
-	* install_any.pm: fix duplicate synthesis.hdlist.xxx file present in
-	/var/lib/urpmi, and
-	furthermore uncompressed :-(
-	fixed possible bug when generating synthesis file for urpmi
-	installation.
-
-2002/03/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c, mdk-stage1/dhcp.h, mdk-stage1/network.c: save
-	dhcp_hostname for stage2
-
-	* install_any.pm: fix bug in generating automatic stage1
-	params for http
-
-	* modules.pm: aironet core sucking thing
-
-2002/03/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sr.po, share/po/sp.po: updated po files
-
-2002/03/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: if mem=nopentium is given on cmdline, have it after
-	install
-
-	* modules.pm (extract_modules): created (was done in load_raw)
-
-2002/03/05  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator.pm: use UseFBDev for r128 - PPC
-
-2002/03/05  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added support for HP's newest MF devices: HP OfficeJet
-	D series, HP LaserJet 33xx MFP.
-	Fixed bug of printerdrake sometimes assuming the user has an MF device
-	when he has typed the device file name in the expert mode.
-
-2002/03/05  yduret
-
-	* bootlook.pm: fix nobody bug
-
-	* standalone/logdrake: mail alert: use eval {} to catch wizcancel
-
-2002/03/04  dam's  <damien@mandrakesoft.com>
-
-	* modparm.pm: corected weirdness, I suck
-
-2002/03/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fix scroll total to match reality.
-	fixed interpretation of size of package when doing an install (this can
-	be
-	severe, need testing).
-
-2002/03/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cy.po, share/po/id.po: updated po file
-
-2002/03/03  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm (gtkicons_labels_widget): since style is not set either, use
-	the widget and ask it the style->font. This *works*
-	(gtkicons_labels_widget): pass the style instead of directly passing the
-	font
-
-2002/03/03  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Let Star Office/OpenOffice.org configuration corrcet a bug
-	in the PostScript produced by these programs so that the Euro symbol is
-	printed correctly.
-
-2002/03/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated po file
-
-2002/03/02  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm: better name for windobe new 0x42 special id (their
-	own LVM marker)
-
-	* detect_devices.pm: better jaz detection (thanks to Randy Welch)
-
-2002/03/02  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org".
-
-2002/03/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po, share/po/da.po, share/po/vi.po, share/po/hu.po: updated
-	po files
-
-	* share/po/tr.po: updated po file
-
-2002/03/02  Pixel  <pixel@mandrakesoft.com>
-
-	* share/list: add lvreduce & lvextend
-
-	* detect_devices.pm: fix ide zip name when there are already some other
-	SCSI drives
-	ZIPs and Jazz's are not floppies
-
-	* diskdrake/interactive.pm (Resize): ensure we call lv_resize from lvm and
-	adjust_* for normal partitions, even for destructive resizes
-
-2002/03/02  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org".
-
-2002/03/01  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: fix gc's bulshit
-
-2002/03/01  dam's  <damien@mandrakesoft.com>
-
-	* services.pm: corrected translation used for shell command
-
-	* my_gtk.pm: style & font correction
-
-2002/03/01  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate: updated INSTALL category with NOCOPY new flag added.
-
-	* rescue/tree/etc/oem: added ext3 support.
-
-	* share/rpmsrate.server: synced with rpmsrate INSTALL category.
-
-	* install_any.pm: reset correct setup_postinstall_rpms calling.
-	removed some card where 3D is not installed by default:
-	Riva128, Radeon 8500 and Rage Mobility card.
-	removed staling debug code.
-	fixed bad copied package (if one is not found).
-
-	* tools/oem-prepare: added handling of newer rpmsrate format with INSTALL
-	category.
-
-	* pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY
-	handling.
-	only copy package in INSTALL category with a rate of at least 2.
-
-2002/03/01  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: a few missing trads
-	please translators, keep two newlines when
-	there are two newlines in original string,
-	it's on purpose
-
-2002/03/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated po files
-
-	* share/po/fr.po: fixed two typos
-	small corrections (non breakable spaces)
-
-2002/03/01  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=>
-	Xdrakres completly obsolete)
-
-	* standalone/localedrake: restrict localedrake to installed lang
-
-	* lang.pm: restrict localedrake to installed lang
-	add 'C' in %charset2kde_font (so that english has normal fonts)
-
-	* bootloader.pm: 
-	  - do not indent "disk=... bios=..."
-	  - $lilo->{first_hd_device} can be used to tell which drive is the
-	first one
-	for the BIOS. Useful when the bootloader is installed on a partition and
-	not
-	on the MBR.
-	read "disk=/dev/xxx bios=0x8x" and save it
-
-	* any.pm: restrict localedrake to installed lang
-	ask which hard drive is the booting one when there is mixed kind of
-	drives
-	(scsi+ide, ide2+ide) and the bootloader is not installed on MBR
-
-2002/03/01  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Reduced the paths to search for Star/Open Office, on systems
-	without these applications installed the search needed a significant
-	time.
-
-2002/03/01  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate: updated INSTALL category with NOCOPY new flag added.
-
-	* share/rpmsrate.server: synced with rpmsrate INSTALL category.
-
-	* install_any.pm: removed staling debug code.
-	fixed bad copied package (if one is not found).
-
-	* pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY
-	handling.
-	only copy package in INSTALL category with a rate of at least 2.
-
-2002/03/01  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: add hostname/domain in dhcp negociation,
-	thx to david@eastcott.net
-
-	* share/po/fr.po: please translators, keep two newlines when
-	there are two newlines in original string,
-	it's on purpose
-
-2002/03/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po, share/po/zh_TW.po, share/po/hu.po: updated po files
-
-2002/03/01  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=>
-	Xdrakres completly obsolete)
-
-	* detect_devices.pm: add is_a_recent_computer()
-
-	* any.pm: call dcop as user
-
-	* lang.pm: add 'C' in %charset2kde_font (so that english has normal fonts)
-	switch en_GB, *_CH, da, es@tradicional and wa to iso-8859-15
-
-	* bootloader.pm: read "disk=/dev/xxx bios=0x8x" and save it
-
-	* mouse.pm: special case for non detected usb interface on a box with no
-	mouse.
-	we *must* find out if there really is no usb, otherwise the box may
-	not be accessible via the keyboard (if the keyboard is USB)
-	the only way to know this is to make a full pci probe
-
-2002/02/28  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakbackup: bugfixs
-	corrected translation for crontab
-
-	* modparm.pm: corrected modinfo path for isa modules during install
-
-2002/02/28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: try to fix if no chosen width has been found.
-	removed Radeon 8500 from DRI capable cards.
-
-	* rescue/tree/etc/oem: added curl as a bonus for oem install (it will be
-	used by urpmi)
-	added a2ps as a bonus (it fetch tetex where oem limited disk usage do
-	not agree
-	a lot).
-	fixed bad copy of install packages.
-
-	* tools/oem-prepare: added curl as a bonus for oem install (it will be
-	used by urpmi)
-	added a2ps as a bonus (it fetch tetex where oem limited disk usage do
-	not agree
-	a lot).
-	fixed bad copy of INSTALL packages.
-
-2002/02/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install2.pm: more precise msg when can't access kernel modules because
-	we still have many dumb people on cooker asking what's going on
-
-	* install_steps_interactive.pm: small english fix
-
-2002/02/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/de.po, share/po/no.po: updated po files
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-	* share/po/sv.po: updated Swedish file
-	updated pot file
-
-2002/02/28  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/make_rescue_img: resolve conflicts for short keytable names (eg:
-	"no" could be either "no-dvorak" or "no-latin1")
-
-	* keyboard.pm (loadkeys_files): ensure each file appear only once
-
-2002/02/28  siegel
-
-	* share/po/de.po: and another part of updates
-	updates
-
-2002/02/28  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* share/po/fr.po: last translation but not least.
-	further updates
-	update french translation
-
-2002/02/28  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-marble3d.rc: rechanged bg for camille
-
-	* standalone/drakbackup: corrected translation for crontab
-
-2002/02/28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed bad copy of install packages.
-
-	* tools/oem-prepare: fixed bad copy of INSTALL packages.
-
-	* Xconfigurator.pm: removed Radeon 8500 from DRI capable cards.
-
-2002/02/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/aliases, rescue/list: include /sbin/fsck.ext3 since our users are
-	so dumb
-
-2002/02/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_TW.po: updated Chinese file
-
-2002/02/28  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/make_rescue_img: resolve conflicts for short keytable names (eg:
-	"no" could be either "no-dvorak" or "no-latin1")
-
-	* keyboard.pm (loadkeys_files): ensure each file appear only once
-
-	* bootloader.pm: add "nowarn" in lilo.conf
-
-	* install_steps.pm, fs.pm: use the "soft" option by default for /mnt/nfs
-	and for "diskdrake --nfs"
-
-2002/02/28  sdupont
-
-	* standalone/drakfont: including 'su' mode on drakfont.
-
-2002/02/28  siegel
-
-	* share/po/de.po: updated missing strings
-
-2002/02/28  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Re-activated function to specify a CUPS server in
-	another network and to switch to manual CUPS configuration.
-	  - Fixes/Improvements on Star Office/Open Office support:
-	o When one switches the spooler, the entries of the printers under the
-	     old spooler are removed from Star Office/Open Office
-	   o Printers on remote CUPS servers (which are known through
-	broadcasting)
-	     can be added to Star Office/Open Office
-
-	* share/rpmsrate.server, share/rpmsrate: Added "curl" to install section,
-	it is needed by printerdrake.
-
-	* printer.pm: 
-	  - Fixes/Improvements on Star Office/Open Office support:
-	o When one switches the spooler, the entries of the printers under the
-	     old spooler are removed from Star Office/Open Office
-	   o Printers on remote CUPS servers (which are known through
-	broadcasting)
-	     can be added to Star Office/Open Office
-
-2002/02/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: updated Basque file
-
-2002/02/27  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: 
-	  - Improved fully automatic adding of printer queue:
-	o Ask for a queue name if more than one printer is detected
-	   o Let user confirm the model automatically chosen from the database
-	   o Set correct paper size according to the language/country
-	  - When one chooses a "CUPS + GIMP-Print" driver now all important
-	options
-	  are displayed directly (without needing "Advanced" button).
-	  - Made less warning appearing on the console from where "printerdrake"
-	was
-	  called.
-
-2002/02/27  fabman
-
-	* share/po/es.po: converted to UTF-8
-
-2002/02/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* crypto.pm: fix missing version listed when doing update.
-
-2002/02/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: a few translations
-
-	* mdk-stage1/rescue-gui.c, rescue/restore_ms_boot, rescue/list.i386,
-	rescue/make_rescue_img: add "restore Windows Boot Loader" to rescue
-
-	* install_steps_interactive.pm: formatAlaTex for congratz msg
-	xfs + bootdisk = warning_msg
-
-	* share/rpmsrate: flightgear is now fully lowercase
-	glaxium
-
-	* mdk-stage1/pcmcia_/probe.c: add Keld J�rn Simonsen <keld@dkuug.dk>'s O2
-	Micro
-	CardBus controller, and two other PCI entries which
-	have close descriptions
-
-	* mdk-stage1/pcmcia_/merge_from_pcitable: misc
-	also report when pcitable is "too old"
-	write a short perl program to easily merge new
-	cardbus controllers from pcitable into probe.c
-
-2002/02/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: updated po file
-
-2002/02/27  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: simplify pyDict
-
-	* install_steps_interactive.pm: ensure a keyboard is only once available,
-	either in advanced or normal, but
-	not in both (tx2fredl)
-
-	* share/po/da.po: 
-	  - it is UTF-8
-	  - fix line splitting
-
-	* lang.pm: workaround iso-8859-1 charset based languages not displayed
-	correctly at install
-	  - %lang2country is the authority, so if the country given by
-	%lang2country doesn't exist in KDE, return C
-	  - fix be,sp,sr
-	  - s/def/default/ (typo)
-	  - add some utf kde fonts
-
-2002/02/27  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* share/po/fr.po: update french translation
-
-	* standalone/drakxtv: 
-	  - simplify an ACTION||fallback;fallback into ACTION;fallback
-	  - print a message saying that xawtv can be used now at the end of the
-	channels auto-probing in case of direct use from cl and not from
-	  XawTV wrapper (from qa test) aka let the world be better :-)
-
-	* share/po/br.po: minor update
-	update brezhoneg translation
-
-2002/02/26  dam's  <damien@mandrakesoft.com>
-
-	* modparm.pm: corrected bad sprintf
-
-2002/02/26  fabman
-
-	* share/po/es.po: updated spanish translations
-
-2002/02/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: version 8.2
-
-2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po, share/po/sv.po, share/po/hu.po: updated po files
-
-2002/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm,
-	diskdrake/interactive.pm: propose some mount points for
-	removable/nfs/smb
-
-	* install_steps_interactive.pm: if no sound card are detected AND the user
-	selected things needing a sound card, propose a special case for ISA
-	cards
-
-	* share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes
-	when asked for a ISA
-	sound card)
-
-	* my_gtk.pm (@icon_paths): ease testing
-
-2002/02/26  siegel
-
-	* share/po/de.po: updates
-
-2002/02/26  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: corrected ttf/TTF and xfs restart
-
-	* share/logo-mandrake.png: new logo
-
-2002/02/26  fabman
-
-	* share/po/es.po: updated spanish translations
-
-2002/02/26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix translation of test program.
-
-2002/02/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/libstdio/fclose.c: don't segfault when fclose(NULL)
-
-	* share/po/fr.po: 
-	  - explain where to put nbsp spaces, explain
-	what's nbsp spaces, explain how to compose them
-	  - add a few missing nbsp spaces
-	  - translate a few more things
-
-2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* any.pm: fixed English typo
-
-2002/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm,
-	diskdrake/interactive.pm: propose some mount points for
-	removable/nfs/smb
-
-	* Xconfigurator.pm: make perl_checker happy
-	have "Ok  More  Show all" instead of "Ok  Cancel  Show all"
-	set the locale properly instead of setting the translated messages in
-	the script
-
-	* any.pm: 
-	  - zips() now return devices ending with "4", raw_zips() is the old
-	zips()
-	  - rdvd handling
-	  - add .conf for /etc/devfs/conf.d/ files
-	(devfssymlinkf): use /etc/devfs/conf.d/name.conf instead of putting the
-	symlink in lib/dev-state
-
-	* share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes
-	when asked for a ISA
-	sound card)
-	add xine in VIDEO 4
-
-	* install_steps.pm: 
-	  - zips() now return devices ending with "4", raw_zips() is the old
-	zips()
-	  - rdvd handling
-	  - add .conf for /etc/devfs/conf.d/ files
-	don't add mem=nopentium anymore. kernel people says it's not needed and
-	bad
-	for performance. It also means any bug must be addressed to them
-	create /dev/dvd for DVDs
-
-	* my_gtk.pm (@icon_paths): ease testing
-
-	* lang.pm: create bindtextdomain which does only part of the load_mo job
-
-	* install_steps_interactive.pm: if no sound card are detected AND the user
-	selected things needing a sound card, propose a special case for ISA
-	cards
-
-	* detect_devices.pm: 
-	  - zips() now return devices ending with "4", raw_zips() is the old
-	zips()
-	  - rdvd handling
-	  - add .conf for /etc/devfs/conf.d/ files
-	cleanup
-
-	* fs.pm: 
-	  - zips() now return devices ending with "4", raw_zips() is the old
-	zips()
-	  - rdvd handling
-	  - add .conf for /etc/devfs/conf.d/ files
-
-2002/02/26  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: Ti Powerbook uses non-std 1152x768, rather than
-	1152x864
-
-2002/02/26  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* standalone/drakxtv: use "xvt -T" rather than "xvt --title": now not only
-	we support rxvt
-	and xterm but konsole too.
-	the only one missing is gnome-terminal which has -t but not -T
-	update comments
-	  - remove useless "no_edit => 1"
-	  - use interactive_gtk to determine if we're runned under X11 (ie
-	authorized acces to X11 server, X11 context, ...)
-	  - add a note to remember that we should add a method to detect if we
-	  run under X11 if/when we implement interactive_qt
-	  - simplify code :
-		* remove is_tv and simplify its code to be a one-liner (replace a
-		  foreach by a scalar context)
-		* use format to prevent reverse lookup on scantv run thus
-		  enabling to reverse the initial hash table
-	  - all cases (newt, gtk, wt/wo xvt, ...) have been re tested on real
-	hw.
-
-2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated po file
-
-2002/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove passwords and realnames from report.bug
-
-2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated po file
-
-2002/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove passwords and realnames from report.bug
-
-2002/02/25  dam's  <damien@mandrakesoft.com>
-
-	* any.pm, modparm.pm: corrected modules parameters functions
-
-	* standalone/drakfont: debug
-
-2002/02/25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: fixes for cursor or
-	nasty pixel displayed using syslinux-1.67-3mdk
-
-2002/02/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: don't put accents for bootloader, we can just use 7bit
-	chars
-	(titi sucks bigtime)
-	add a few nbsp spaces
-
-	* rescue/list: add mt-st DAT stuff for joeghi (ghibo)
-
-2002/02/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2002/02/25  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: ignore-table is a global flag, so put it there (when
-	needed)
-
-	* standalone/drakboot: add --testing
-
-	* modules.pm, install_steps.pm, fs.pm, detect_devices.pm: use ide-scsi for
-	ide zips
-
-	* install_steps_interactive.pm: sort the list of keyboards
-
-2002/02/25  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* share/po/fr.po: fix a typo (thanks gc)
-
-2002/02/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ru.po, share/po/sp.po, share/po/ca.po, share/po/th.po,
-	share/po/uk.po, share/po/es.po, share/po/eo.po, share/po/ro.po,
-	share/po/sv.po, share/po/sr.po, share/po/da.po, share/po/el.po,
-	share/po/et.po, share/po/cs.po, share/po/tr.po, share/po/az.po,
-	share/po/eu.po: updated some po files
-
-2002/02/24  Pixel  <pixel@mandrakesoft.com>
-
-	* share/keyboards.tar.bz2: fix permission
-
-2002/02/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cy.po, share/po/Makefile: updated Welsh file
-
-	* share/po/zh_CN.po, share/po/DrakX.pot, share/po/eu.po, share/po/vi.po,
-	share/po/wa.po, share/po/zh_TW.po: udated Vietnamese file
-
-	* install_steps_interactive.pm: removed useless _( ) around a string
-	displayed in English only
-
-	* share/po/be.po, share/po/bg.po, share/po/sk.po, share/po/ar.po,
-	share/po/sl.po, share/po/br.po, share/po/bs.po, share/po/sv.po,
-	share/po/af.po: updated some po files
-
-2002/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_newt.pm: 
-	  - use simplify_string to ensure multi-line and too long strings are
-	not used
-	(hacky, but no other solution)
-	  - set $::setstep like interactive_gtk is doing (??)
-
-	* partition_table_empty.pm: handle MBR containing the same character (0 or
-	"l")
-
-	* diskdrake/interactive.pm: not_edit'able filesystem type (allow esp. a
-	nicer newt version)
-
-	* devices.pm (devices::make): following a good advice from Andrej
-	Borsenkow, return the
-	file even if the device file doesn't exist the caller will fail or not.
-	The
-	advantage is better compatibility than raising an exception
-	devices::make doesn't mknod with devfs
-
-	* detect_devices.pm: no need to catch the exception from devices::make
-	anymore
-	devices::make doesn't mknod with devfs
-
-	* fs.pm: nicer error message when mount fails
-
-	* share/rpmsrate: adding gphoto2
-
-	* install_steps_interactive.pm: when passwords do not match, focus on
-	first password entry, not the second (thanks to garrick)
-
-	* Xconfigurator_consts.pm: remove Option "sw_cursor" for "SiS 6326" since
-	it's already handled in Xconfigurator.pm
-
-	* my_gtk.pm: fix @icon_paths to include /usr/share/libDrakX/pixmaps
-	(thanks to garrick)
-
-	* modules.pm: remove "-f" option for insmod
-
-2002/02/23  siegel
-
-	* share/po/de.po: fixed silly error
-	updates
-
-2002/02/23  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Added automatic configuration of printers
-	in Star Office and Open Office.
-
-2002/02/22  dam's  <damien@mandrakesoft.com>
-
-	* share/advertising/02-internet.pl, share/advertising/07-server.pl,
-	share/advertising/11-consul.pl, share/advertising/09-MDKcampus.pl,
-	share/advertising/01-gnu.pl, share/advertising/13-Nvert.pl,
-	share/advertising/06-user.pl, share/advertising/10-MDKexpert.pl,
-	share/advertising/04-develop.pl, share/advertising/05-contcenter.pl,
-	share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl,
-	share/advertising/08-games.pl: corrected advertising text
-
-	* share/po/fr.po: corrected bad translation
-
-	* my_gtk.pm: corrected icon paths
-
-2002/02/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: exit the pur_gtk version after launching the wizard
-	version
-
-	* any.pm: better rephrasing
-	change name and description of security levels
-
-	* share/rpmsrate: powermanga: 2 -> 3
-
-2002/02/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po, share/po/DrakX.pot: updated Danish file
-
-	* lang.pm: start of support of kde fonts
-	fixed some keyboard names
-
-	* keyboard.pm: fixed some keyboard names
-	added the two ?win_toggle choices
-	some info useful for keyboard handling
-
-	* share/keyboards.tar.bz2: fixed some keyboard names
-
-	* share/po/hu.po: updated hungarian file
-
-2002/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: even smarted process to kill selection
-
-	* lang.pm: fix 2 entries in charset2kde_font
-	  - remove non needed entries in lang2country
-	  - fix syntax errors
-	  - rename kdefont in charset2kde_font
-	  - much cleanup
-	use invalid instead of unknown for errors when checking
-	put back the less deep langs
-	have the tree less deep (esp. nicer when not displaying UTF-8 entries)
-	not translating in console installs (esp. newt) when the font is missing
-	restrict the langs displayed to non utf8 during install
-	fix warning message
-	disable perl warnings when checking
-	make perl_checker happy
-
-	* devices.pm: add atibm (thanks to Robin Pollard)
-
-	* bootloader.pm: put ignore-table to disable lilo's partition table
-	checking
-	(esp. the checking of the CHS geometry vs linear geometry)
-
-	* Xconfigurator_consts.pm: fix syntax typo
-
-	* Makefile: 
-	  - exclude urpm from perl_checker
-	  - add checking keyboard.pm
-
-	* install_steps_interactive.pm, install2.pm, install_steps.pm: not
-	translating in console installs (esp. newt) when the font is missing
-
-	* keyboard.pm: use invalid instead of unknown for errors when checking
-	change the message
-	disable perl warnings when checking
-	  - add checks for the various data structures
-	  - fix another typo for usb2drakxkbd
-	fix typo
-
-	* share/rpmsrate: add procmail in SYSTEM 4
-	add samba-doc samba-winbind samba-swat
-
-	* Xconfigurator.pm: workaround set_active failing
-
-	* any.pm: use the setupBootloader help instead of setupBootloaderGeneral
-	restrict the langs displayed to non utf8 during install
-
-2002/02/22  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakxtv: update TODO list;
-	explain what is HRC
-
-	* share/po/fr.po: further translations
-	update french translation
-
-2002/02/21  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: corrected icon list
-
-2002/02/21  fabman
-
-	* share/po/es.po: updated spanish po file
-
-2002/02/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: spacecup no more exists
-	armagetron is nice, no use to install gltron as well
-	autoconf2.5 and automake1.5
-
-	* interactive.pm: when not in X and needs su, use consolehelper now
-	use consolehelper when no "kdeinit: kwin" process
-	is running
-
-2002/02/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/21  Pixel  <pixel@mandrakesoft.com>
-
-	* lvm.pm, install_any.pm: ensure lvm tools don't need to be all installed
-	at the same time
-
-	* lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are
-	getFile'd (cuz they are big, causing the .cz2 to be *big*)
-
-	* share/rpmsrate: add kinput2-wnn4
-
-2002/02/21  siegel
-
-	* share/po/de.po: update
-
-2002/02/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Removed "Manual configuration" button when "Local
-	Printer" dialog is started from the queue modification menu (Recommended
-	mode).
-	Improved matching of printer names resulting from auto-detection with
-	names in the database.
-
-2002/02/21  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: final batch of typos fixes (next time, please run a
-	check speller)
-	fix more typos
-	update french translation;
-	fix typos
-
-	* diskdrake/interactive.pm: shorter displayed message
-
-2002/02/21  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: changed button label
-
-	* standalone/icons/gmon.png, standalone/icons/categ.png,
-	standalone/icons/verti.png, standalone/icons/drakbackup.540x57.png,
-	standalone/icons/net_c.png, standalone/icons/ic82-system-40.png,
-	standalone/icons/wiz_drakgw.png, standalone/icons/ic-drakfont-48.png,
-	standalone/icons/ic82-back-up-16.png,
-	standalone/icons/wiz_scannerdrake.png,
-	standalone/icons/ic82-discdurwhat-40.png,
-	standalone/icons/ic82-tape-40.png, standalone/icons/ic82-network-40.png,
-	standalone/icons/smbnfs_default.png, standalone/icons/smbnfs_server.png,
-	standalone/icons/hori.png, standalone/icons/wiz_draknet.png,
-	standalone/icons/smbnfs_mounted.png, standalone/icons/wiz_firewall.png,
-	standalone/icons/wiz_default_up.png,
-	standalone/icons/ic82-back-up-32.png, standalone/icons/ic82-CD-40.png,
-	standalone/icons/ic82-systemeplus-40.png,
-	standalone/icons/ic82-back-up-48.png,
-	standalone/icons/ic82-dossier-32.png, standalone/icons/net_d.png,
-	standalone/icons/ic82-moreoption-40.png,
-	standalone/icons/smbnfs_has_mntpoint.png, standalone/icons/tradi.png,
-	standalone/icons/wiz_printerdrake.png,
-	standalone/icons/wiz_default_left.png,
-	standalone/icons/eth_card_mini2.png, standalone/icons/net_u.png,
-	standalone/icons/ic82-users-40.png, standalone/icons/mdk_logo.png,
-	standalone/icons/ic82-others-40.png, standalone/icons/ic82-when-40.png,
-	standalone/icons/draknet_step.png, standalone/icons/drakfont.620x57.png,
-	standalone/icons/ic82-where-40.png: added new gfx only standalone
-
-	* pixmaps/categ.png, pixmaps/verti.png, pixmaps/ic82-moreoption-40.png,
-	pixmaps/ic82-system-40.png, pixmaps/net_c.png,
-	pixmaps/ic-drakfont-48.png, pixmaps/ic82-CD-40.png,
-	pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png,
-	pixmaps/draknet_step.png, pixmaps/ic82-dossier-32.png,
-	pixmaps/ic82-back-up-48.png, pixmaps/smbnfs_server.png,
-	pixmaps/ic82-discdurwhat-40.png, pixmaps/smbnfs_default.png,
-	pixmaps/gmon.png, pixmaps/drakbackup.540x57.png,
-	pixmaps/smbnfs_mounted.png, pixmaps/wiz_printerdrake.png,
-	pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png,
-	pixmaps/drakfont.620x57.png, pixmaps/ic82-tape-40.png,
-	pixmaps/wiz_draknet.png, pixmaps/net_d.png,
-	pixmaps/ic82-systemeplus-40.png, pixmaps/wiz_drakgw.png,
-	pixmaps/mdk_logo.png, pixmaps/ic82-users-40.png,
-	pixmaps/ic82-back-up-16.png, pixmaps/hori.png, pixmaps/tradi.png,
-	pixmaps/smbnfs_has_mntpoint.png, pixmaps/eth_card_mini2.png,
-	pixmaps/wiz_firewall.png, pixmaps/net_u.png, pixmaps/ic82-where-40.png,
-	pixmaps/ic82-others-40.png, pixmaps/ic82-network-40.png,
-	pixmaps/wiz_scannerdrake.png: removed gfx not used during install
-
-2002/02/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* crypto.pm: fixed another not seen 8.1 reference in label.
-	fixed 8.1 release hard coded.
-
-2002/02/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fi.po: updated pot file
-	updated Finnish file
-
-	* help.pm: updated help file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/21  Pixel  <pixel@mandrakesoft.com>
-
-	* share/themes/blueHeart-button4.png, share/themes-DarkMarble.rc,
-	install_gtk.pm, share/themes/DarkMarble-button3_out.png,
-	share/themes.rc, share/themes/blueHeart-brown_bg1.png,
-	share/themes/DarkMarble-button3_in.png, share/themes-blueHeart.rc,
-	share/themes/DarkMarble-check_on.png,
-	share/themes/blueHeart-button1.png,
-	share/themes/DarkMarble-check_off.png,
-	share/themes/blueHeart-button2.png, share/themes/DarkMarble-gloom2.png,
-	share/themes/DarkMarble-button3_in_prelight.png,
-	share/themes/DarkMarble-button3_out_prelight.png: remove DarkMarble and
-	blueHeart themes
-
-	* bootloader.pm: have devfs=nomount for failsafe
-
-	* Makefile.config, share/po/Makefile: make a difference between PMS and
-	ALLPMS. For install, only use PMS
-
-	* lvm.pm: ensure lvm tools don't need to be all installed at the same time
-
-	* Makefile: template.in stuff removed
-	make a difference between PMS and ALLPMS. For install, only use PMS
-
-	* pkgs.pm: smarter choosing of processes to kill
-
-	* tools/i386/netboot/make_boot_network: cleanup
-
-	* modules.pm: add aic7xxx_old
-
-	* install_any.pm: ensure lvm tools don't need to be all installed at the
-	same time
-	(remove_bigseldom_used): remove xf86Wacom.so & mkfs.xfs
-	DarkMarble theme is removed
-	(kdeicons_postinstall): remove this obsolete code
-	no special case for installing imwheel
-
-	* lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are
-	getFile'd (cuz they are big, causing the .cz2 to be *big*)
-
-	* network/smbnfs.pm, network/nfs.pm: nicer conditional displaying of nfs
-	comment
-
-2002/02/21  siegel
-
-	* share/po/de.po: update
-	snapshot
-
-2002/02/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added "type => 'list'" to the printer modification
-	menu, it appeared as a drop-down list during the installation.
-
-2002/02/21  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakxtv: more translatable strings;
-	hide scantv output on console;
-	check that we're under X11 before running scantv in an xterm
-
-2002/02/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/doc/UPDATEMODULES: add an example on modules with options
-	first line comment no more necessary
-	s/row/column/, silly me
-
-	* standalone.pm: explanations stuff: no reason to use "updated" at a place
-	when we
-	use "modified" at the rest of the locations..
-
-2002/02/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/es.po: updated Spanish file
-	updated Spanish file
-
-2002/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (ejectCdrom): display "files still open:" for all
-	processes when umounting fail
-
-	* pkgs.pm: much simpler & stronger killing of still running processes
-
-	* mouse.pm: USB|Generic is 3 button mice, add a USB 2 Button entry
-
-2002/02/20  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-marble3d.rc: updated theme
-
-	* network/adsl.pm: mgmt install corrected
-
-2002/02/20  daouda
-
-	* share/rpmsrate: 
-	  - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS
-	NETWORKING_REMOTE_ACCESS_SERVER
-
-2002/02/20  fcrozat
-
-	* share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla
-
-2002/02/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem, tools/oem-prepare: synced with newer rpmsrate of
-	DrakX and newer method to select INSTALL packages.
-
-	* standalone/XFdrake: fixed NVIDIA package in urpmi db by directly using
-	urpm library instead of
-	parsing (now removed) depslist.ordered file.
-
-	* Xconfigurator.pm: fixed default value if selecting a card (use previous
-	one or existing one).
-	added XFree 4 driver choice if Other|Unlisted is chosen.
-	fixed cancel on card selection so that previous choice is not lost.
-
-	* Xconfigurator_consts.pm: added @allbutfbdrivers and @alldrivers for
-	listing XFree 4 drivers.
-
-2002/02/20  gbeauchesne
-
-	* share/rpmsrate: 
-	  - Add gcc3.0-c++ and libstdc++3.0-devel
-	  - Prefer gcc3.0-java over gcc-java
-	  - Remove BasiliskII-sheepnet since it does no longer exist
-	  - Add/prefer BasiliskII-jit over BasiliskII
-
-2002/02/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po: updated FRench file
-
-	* share/po/es.po: updated Spanish file
-	updated Spanish file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: fix s/SILO/LILO/
-
-	* fsedit.pm: have "with /usr" translated
-
-	* install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel"
-	button
-
-	* steps.pm: move installUpdates after configureX (workaround for bad
-	timeouts during installing updates)
-
-	* install_steps.pm, any.pm, standalone/draksec: factorize and update the
-	reading of previous security level
-
-2002/02/20  siegel
-
-	* share/po/de.po: update
-
-2002/02/20  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: update french translations
-
-2002/02/20  dam's  <damien@mandrakesoft.com>
-
-	* share/advertising/13-Nvert.pl: changed toll free
-
-	* my_gtk.pm: added mcc kill if wait message
-
-	* standalone/logdrake: cosmetic change, mcc compliance
-
-2002/02/20  daouda
-
-	* share/rpmsrate: 
-	  - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS
-	NETWORKING_REMOTE_ACCESS_SERVER
-
-2002/02/20  fcrozat
-
-	* share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla
-
-2002/02/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm, install_any.pm: fixed INSTALL category in rpmsrate for copying
-	file when changing cd (was an
-	limitation in read_rpmsrate when a package having a category and INSTALL
-	caused
-	INSTALL to be dropped).
-
-2002/02/20  gbeauchesne
-
-	* share/rpmsrate: 
-	  - Add gcc3.0-c++ and libstdc++3.0-devel
-	  - Prefer gcc3.0-java over gcc-java
-	  - Remove BasiliskII-sheepnet since it does no longer exist
-	  - Add/prefer BasiliskII-jit over BasiliskII
-
-2002/02/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/advertising/07-server.pl, share/advertising/01-gnu.pl: Improved
-	English strings
-
-	* share/po/hu.po, share/po/es.po, share/po/ar.po: updated Hungarian and
-	Spanish files
-
-2002/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove fsck_option (obsolete)
-
-	* share/po/fr.po: fix s/SILO/LILO/
-
-	* fsedit.pm: have "with /usr" translated
-
-	* install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel"
-	button
-
-	* steps.pm: move installUpdates after configureX (workaround for bad
-	timeouts during installing updates)
-
-	* install_steps.pm, any.pm, standalone/draksec: factorize and update the
-	reading of previous security level
-
-2002/02/20  siegel
-
-	* share/po/de.po: snapshot
-
-2002/02/19  dam's  <damien@mandrakesoft.com>
-
-	* share/advertising/Makefile: new Makefile to install ads
-
-2002/02/19  fcrozat
-
-	* share/rpmsrate: 
-	  -Install gnome-vfs-extras when installing nautilus (to get samba
-	browsing)
-	  -don't install nautilus-mozilla, it is pulled by nautilus
-
-2002/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* any.pm: english fix
-
-2002/02/19  Pixel  <pixel@mandrakesoft.com>
-
-	* share/advertising/Makefile: advertising installation cleanup
-
-	* diskdrake/smbnfs_gtk.pm: ugly hack to fix die
-
-2002/02/19  siegel
-
-	* share/po/de.po: updates for beta 3
-
-2002/02/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
-	dialog.
-
-2002/02/19  dam's  <damien@mandrakesoft.com>
-
-	* share/advertising/Makefile: new Makefile to install ads
-
-2002/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add
-	$prefix in front of /var/* when missing
-	since we give "lilo.conf" in drakbug_report, let's also
-	give "menu.lst"
-
-2002/02/19  Pixel  <pixel@mandrakesoft.com>
-
-	* share/advertising/Makefile: advertising installation cleanup
-
-2002/02/19  siegel
-
-	* share/po/de.po: updates for beta 3
-
-2002/02/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
-	dialog.
-
-2002/02/19  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: setting help
-
-	* share/advertising/10-MDKexpert.png, share/advertising/07-server.png,
-	share/advertising/05-contcenter.png, share/advertising/03-graphic.png,
-	share/advertising/12-MDKstore_icon.png,
-	share/advertising/06-user_icon.png,
-	share/advertising/04-develop_icon.png,
-	share/advertising/12-MDKstore.png, share/advertising/00-thanks.png,
-	share/advertising/06-user.png, share/advertising/02-internet_icon.png,
-	share/advertising/04-develop.png,
-	share/advertising/05-contcenter_icon.png,
-	share/advertising/10-MDKexpert_icon.png, share/advertising/13-Nvert.png,
-	share/advertising/11-consul.png, share/advertising/03-graphic_icon.png,
-	share/advertising/02-internet.png, share/advertising/07-server_icon.png,
-	share/advertising/01-gnu.png, share/advertising/08-games.png,
-	share/advertising/09-MDKcampus.png,
-	share/advertising/09-MDKcampus_icon.png,
-	share/advertising/08-games_icon.png: re-adding with -kb
-	removing for re-adding with -kb
-	added advertising for translation
-
-	* share/advertising/essi.p: blah
-	added advertising for translation
-
-	* my_gtk.pm: new icon handler
-
-	* Makefile.config: addde share/advertising/*.pl for translation
-
-	* share/advertising/Makefile: new Makefile to install ads
-
-	* share/advertising/00-thanks.pl, share/advertising/06-user.pl,
-	share/advertising/08-games.pl, share/advertising/list,
-	share/advertising/09-MDKcampus.pl, share/advertising/01-gnu.pl,
-	share/advertising/11-consul.pl, share/advertising/13-Nvert.pl,
-	share/advertising/02-internet.pl, share/advertising/07-server.pl,
-	share/advertising/10-MDKexpert.pl, share/advertising/04-develop.pl,
-	share/advertising/05-contcenter.pl, share/advertising/12-MDKstore.pl,
-	share/advertising/03-graphic.pl: added advertising for translation
-
-2002/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add
-	$prefix in front of /var/* when missing
-	since we give "lilo.conf" in drakbug_report, let's also
-	give "menu.lst"
-
-2002/02/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po, share/po/hu.po: updated Vietnamese and Hungarian files
-
-2002/02/19  Pixel  <pixel@mandrakesoft.com>
-
-	* share/advertising/Makefile: advertising installation cleanup
-
-	* install2.pm: anchor the -IP match at the end of the string
-	move loading /tmp/network from stage1 before doing the auto_install
-	stuff to
-	allow the -IP feature on auto_install file name
-
-	* share/rpmsrate: add grub in 4 SYSTEM
-
-2002/02/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* standalone/printerdrake, printer.pm: Assured that the default page size
-	is "Letter" for US/Canada and "A4" for the rest of the world.
-	The "Description" field of a printer queue is filled in with printer
-	manufacturer and model by default.
-	Removed unused varaiables in /usr/sbin/printerdrake.
-
-	* printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
-	dialog.
-	Assured that the default page size is "Letter" for US/Canada and "A4"
-	for the rest of the world.
-	The "Description" field of a printer queue is filled in with printer
-	manufacturer and model by default.
-	Removed unused varaiables in /usr/sbin/printerdrake.
-
-	* install_steps_interactive.pm: Replaced "a4" and "letter" by "A4" and
-	"Letter" so that Foomatic recognizes
-	the paper sizes.
-	Also use "Letter" paper for "en_CA" and "fr_CA" locales.
-
-2002/02/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: when no net device found, print a msg to tell
-	that now most pcmcia network adapters are supported
-	with network.img
-
-2002/02/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help file
-
-	* share/po/sp.po, share/po/zh_CN.po, share/po/DrakX.pot, share/po/th.po,
-	share/po/es.po, share/po/fr.po, share/po/sr.po, share/po/de.po,
-	share/po/sk.po, share/po/tr.po, share/po/eu.po, share/po/sl.po,
-	share/po/vi.po, share/po/uk.po, share/po/wa.po, share/po/sv.po,
-	share/po/zh_TW.po, share/po/it.po: updated pot file
-
-2002/02/18  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm, standalone/localedrake: 
-	  - handle --kde_lang with optionally --kde_country
-	  - handle --apply
-
-	* install_steps_gtk.pm: s/hbox/vbox for "Select Install Class"
-
-2002/02/18  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: new gfx
-
-2002/02/18  fcrozat
-
-	* share/rpmsrate: Install Guppi when installing gnumeric
-
-2002/02/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: titi sucks again
-
-2002/02/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sk.po: updated Slovak ile
-	updated pot file
-
-	* help.pm: updated help file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
-	updated pot file
-
-2002/02/18  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm: 
-	  - remove media_type cdrom-burner, use {capacity} instead
-	  - use /proc/sys/dev/cdrom/info to fill in the {capacity}
-
-	* diskdrake/smbnfs_gtk.pm: 
-	  - add Cancel
-	  - move "click here" in "Search servers" on the right side
-	  - remove Export
-	  - fix bug
-
-	* share/rpmsrate: raise xsane in SCANNER (Yves Duret)
-	raise mkisofs & cdrecord in BURNER
-
-	* Xconfigurator.pm: workaround not having the right to connect to our new
-	created test server.
-	info about the pb (sorry for the french):
-	quand on lance le serveur
-	  - via xdm/kdm/startx, ca utilise xauth, xhost est ferm�
-	  - via X/xinit, xhost est ouvert sur localhost, xauth n'est pas utilis�
-	  *sauf* si X/xinit est lanc� � partir d'un X *et* .Xauthority est non
-	vide.
-	    dans ce cas, xhost est ferm�, et aucun xauth n'est ajout�
-	    une cons�quence, c'est que XFdrake ne peut pas acc�der au X de
-	    test si XFdrake est lanc� sous X ou "xauth list" est non vide
-	      exception: quand on lance le xdm/kdm en root, xhost n'est pas
-	ferm�,
-	         pas contre il est ferm� en root & startx.
-
-	* any.pm (fileshare_config): rework the custom message and launch
-	userdrake
-	(report_bug): add lilo.conf
-
-	* standalone/localedrake: 
-	  - handle --kde_lang with optionally --kde_country
-	  - handle --apply
-	change the message & ask wether to logout or not
-
-	* lang.pm: 
-	  - handle --kde_lang with optionally --kde_country
-	  - handle --apply
-	(lang2kde_lang): add missing valid_kde_langs
-	fuzzy language finding between available langs when it doesn't match
-	(useful for upgrades where fr_FR was fr_FR@euro)
-
-	* diskdrake/interactive.pm: remove cdrom-burner from media_type set
-
-	* install_steps_gtk.pm: s/hbox/vbox for "Select Install Class"
-
-	* fs.pm (mount_options_unpack): add usrquota and grpquota for
-	ext2/ext3/reiserfs/xfs
-	  - remove media_type cdrom-burner, use {capacity} instead
-	  - use /proc/sys/dev/cdrom/info to fill in the {capacity}
-
-	* share/compssUsers: add EDITORS in Development/Development
-	add EDITORS in Development/Development
-
-2002/02/18  yduret
-
-	* bootlook.pm: remove aurora part (commented for the moment)
-
-	* standalone/scannerdrake: HP OfficeJet support
-	scsi/parport preliminary support
-
-	* scanner.pm: update
-	scsi parport preliminary support
-	no more show unsupported scanner
-	common output for ScannerDB update from sane *.desc files and from
-	usbtable
-
-2002/02/17  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/interactive.pm: warn_if_renumbered now also done at install
-
-2002/02/17  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: have icewm-light in any case (to be used as a failsafe
-	window manager)
-	add hotplug, usbutils and usbview with the new flag USB
-
-	* install_any.pm: hotplug now handled via rpmsrate and the USB flag
-	add some log to know why umounting /tmp/image fail
-
-	* diskdrake/interactive.pm: warn_if_renumbered now also done at install
-	force scalar context for warp_text
-
-	* share/po/id.xsl, share/po/help_xml2pm.pl: use xsltproc as a filter to
-	remove entities
-
-	* share/po/Makefile (clean): remove .memdump
-
-	* any.pm (autologin): do not allow empty user name since no autologin can
-	already be achieved by choosing "No"
-
-	* install2.pm: do not use run_program::xxx, use directly "system" so that
-	stdout is kept unchanged during "postInstall" execution
-
-	* network/smb.pm: fix typo (s/nfs/smbfs/)
-
-2002/02/17  siegel
-
-	* help.pm: new version for 8.2
-
-	* share/po/de.po: new german version
-
-	* share/po/help_xml2pm.pl: added check for missing xsltproc
-	fix perl warnings after adding -w
-
-	* share/po/.cvsignore: added .memdump
-
-	* share/po/Makefile: allow me to work with a symlink to doc in this
-	directory
-
-2002/02/16  Pixel  <pixel@mandrakesoft.com>
-
-	* lvm.pm: 
-	  - LVs "device" field were containing "/dev/vg/number" whereas it must
-	be "vg/name"
-	  - added lv_resize
-
-	* diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM
-
-	* crypto.pm (mirrors): add a timeout via "alarm" (needs testing)
-
-2002/02/16  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig.pm: 
-	  - prefer XKB available from existing XF86Config over
-	/etc/sysconfig/keyboard KEYTABLE
-	  - fix translating from /etc/sysconfig/keyboard KEYTABLE to XKB
-
-	* diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM
-
-	* interactive_newt.pm: do not trash error messages if testing
-
-	* lang.pm (country2lang): created
-	(write): ensure it doesn't fail when kdeglobals is not writable (eg: the
-	directory doesn't exist)
-	(list): return the languages in a "specific" order (favours non utf8
-	over utf8)
-
-	* crypto.pm (mirrors): add a timeout via "alarm" (needs testing)
-
-	* install_steps_interactive.pm (setupSCSI): when "clicked", ask "Do you
-	have any SCSI interfaces" instead
-	of assuming there is a SCSI interface and asking the driver name
-
-	* lvm.pm: 
-	  - LVs "device" field were containing "/dev/vg/number" whereas it must
-	be "vg/name"
-	  - added lv_resize
-	  - call pvcreate with "-y -ff"
-	  - created LVs are notFormatted
-
-	* interactive.pm: 
-	  - fix non X + testing + su
-	  - since "interactive" takes care of "format" for type "combo", remove
-	"format" (so that interactive_newt which switch to type "list" don't
-	apply
-	"format" once again)
-
-	* standalone/localedrake: handle --kde_country=<country>
-
-2002/02/16  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (country2lang): created
-	(write): ensure it doesn't fail when kdeglobals is not writable (eg: the
-	directory doesn't exist)
-	(list): return the languages in a "specific" order (favours non utf8
-	over utf8)
-	fix call to update_gnomekderc
-
-	* standalone/localedrake: handle --kde_country=<country>
-
-2002/02/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-	* share/po/sk.po, share/po/cs.po, share/po/es.po: updated Czech, Spanish
-	and Slovak files
-
-2002/02/16  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm: fix call to update_gnomekderc
-	remove unused & unneeded special %lang2kde_lang
-	  - add lang::check
-	  - fix utf-ko -> utf_ko
-	  - fix utf-14 -> utf_14
-	  - modify share/config/kdeglobals
-	  - add charset2kde_charset, lang2country, lang2kde_lang
-
-2002/02/15  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: embedded mode correction
-
-	* my_gtk.pm: highlight in gtk icon widget
-
-	* share/themes/mdk-check_on.png, share/themes/mdk-toggle_off.png,
-	share/themes/mdk-toggle_on.png, share/themes/mdk-check_off.png: new gfx
-
-	* share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
-	share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm,
-	share/step-orange-on.xpm, share/step-green-on.xpm,
-	share/step-red-click.xpm: new gfx
-	new gfx
-
-2002/02/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po, share/po/fi.po, share/po/DrakX.pot, share/po/fr.po,
-	share/po/wa.po, share/po/da.po, share/po/cs.po, share/po/hu.po,
-	share/po/eu.po: updated Basque file; fixed a msgid change
-
-	* share/po/sv.po: updated Swedish file
-	updated Basque file; fixed a msgid change
-
-2002/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* run_program.pm: remove assigning STDIN to /dev/null since:
-	  - programs should not use STDIN
-	  - the "postInstall" script for auto_install's is more happy still
-	having the STDIN.
-
-	* diskdrake/smbnfs_gtk.pm, pixmaps/smbnfs_has_mntpoint.png,
-	pixmaps/smbnfs_default.png, pixmaps/smbnfs_mounted.png,
-	pixmaps/smbnfs_server.png: add icons showing if a mount-point is
-	associated or if the share is mounted
-
-	* pkgs.pm: fix typo
-
-	* diskdrake/interactive.pm: use the new warp_text
-
-	* install_steps.pm: use lang::charset2kde_charset
-
-	* standalone/localedrake: lang::write doesn't need the filename anymore
-
-	* any.pm: use 'combo' instead of 'type' for bootloader choice and security
-	choice
-	(requested by fredb&dadou)
-
-	* interactive_gtk.pm: force scalar for Gtk::Label->new with warp_text
-
-	* interactive.pm: favour "combo" over "list" in any case
-
-	* Makefile (check): add lang::check checking
-
-2002/02/15  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: update translation
-
-2002/02/14  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/lsnetdrake: adapt to the neater network::smb and network::nfs
-
-	* network/smb.pm, network/smbnfs.pm, network/nfs.pm: cleaner & OOed code,
-	with more code sharing
-
-	* interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text
-	feature
-
-	* my_gtk.pm (ctree_set_icon): new function
-
-	* diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a
-	mount-point is associated are coming
-
-	* standalone/diskdrake: fix expert and testing options handling
-
-2002/02/14  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: embedded mode
-	drakfont embedde mode
-
-	* share/step-red-on.xpm, share/step-red.xpm, share/step-orange.xpm,
-	share/step-orange-on.xpm, share/step-orange-click.xpm,
-	share/step-green-click.xpm, share/step-red-click.xpm,
-	share/step-green-on.xpm: new gfx
-
-2002/02/14  erwan
-
-	* tools/i386/netboot/ni5010/pxegrub, tools/i386/netboot/epic100/stage1,
-	tools/i386/netboot/epic100/stage2, tools/i386/netboot/3c90x/pxegrub,
-	tools/i386/netboot/rtl8139/pxegrub, tools/i386/netboot/ni5210/nbgrub,
-	tools/i386/netboot/otulip/stage1, tools/i386/netboot/otulip/stage2,
-	tools/i386/netboot/exos205/nbgrub, tools/i386/netboot/eepro/stage1,
-	tools/i386/netboot/eepro/stage2, tools/i386/netboot/3c529/nbgrub,
-	tools/i386/netboot/smc9000/pxegrub, tools/i386/netboot/ne2100/stage1,
-	tools/i386/netboot/ne2100/stage2, tools/i386/netboot/exos205/pxegrub,
-	tools/i386/netboot/sis900/nbgrub, tools/i386/netboot/ne/stage1,
-	tools/i386/netboot/ne/stage2, tools/i386/netboot/tulip/nbgrub,
-	tools/i386/netboot/sk_g16/nbgrub, tools/i386/netboot/eepro100/pxegrub,
-	tools/i386/netboot/tiara/nbgrub, tools/i386/netboot/rtl8139/stage1,
-	tools/i386/netboot/rtl8139/stage2, tools/i386/netboot/tiara/pxegrub,
-	tools/i386/netboot/lance/nbgrub, tools/i386/netboot/depca/nbgrub,
-	tools/i386/netboot/ni6510/stage1, tools/i386/netboot/3c90x/nbgrub,
-	tools/i386/netboot/ni6510/stage2, tools/i386/netboot/smc9000/stage1,
-	tools/i386/netboot/smc9000/stage2, tools/i386/netboot/3c509/pxegrub,
-	tools/i386/netboot/3c509/stage1, tools/i386/netboot/3c509/stage2,
-	tools/i386/netboot/sis900/pxegrub, tools/i386/netboot/ne2100/pxegrub,
-	tools/i386/netboot/3c595/nbgrub, tools/i386/netboot/eepro/pxegrub,
-	tools/i386/netboot/wd/nbgrub, tools/i386/netboot/ns8390/nbgrub,
-	tools/i386/netboot/ni5210/stage1, tools/i386/netboot/ni5010/nbgrub,
-	tools/i386/netboot/ni5210/stage2, tools/i386/netboot/exos205/stage1,
-	tools/i386/netboot/exos205/stage2, tools/i386/netboot/eepro100/nbgrub,
-	tools/i386/netboot/3c529/stage1, tools/i386/netboot/3c529/stage2,
-	tools/i386/netboot/sis900/stage1, tools/i386/netboot/tulip/stage1,
-	tools/i386/netboot/sis900/stage2, tools/i386/netboot/tulip/stage2,
-	tools/i386/netboot/sk_g16/stage1, tools/i386/netboot/w89c840/nbgrub,
-	tools/i386/netboot/sk_g16/stage2, tools/i386/netboot/tiara/stage1,
-	tools/i386/netboot/tiara/stage2, tools/i386/netboot/depca/stage1,
-	tools/i386/netboot/lance/stage1, tools/i386/netboot/3c90x/stage1,
-	tools/i386/netboot/depca/stage2, tools/i386/netboot/lance/stage2,
-	tools/i386/netboot/3c90x/stage2, tools/i386/netboot/otulip/pxegrub,
-	tools/i386/netboot/tulip/pxegrub, tools/i386/netboot/epic100/nbgrub,
-	tools/i386/netboot/3c595/stage1, tools/i386/netboot/ni5210/pxegrub,
-	tools/i386/netboot/3c595/stage2, tools/i386/netboot/w89c840/pxegrub,
-	tools/i386/netboot/wd/stage1, tools/i386/netboot/wd/pxegrub,
-	tools/i386/netboot/wd/stage2, tools/i386/netboot/otulip/nbgrub,
-	tools/i386/netboot/ns8390/stage1, tools/i386/netboot/eepro/nbgrub,
-	tools/i386/netboot/ni5010/stage1, tools/i386/netboot/ns8390/stage2,
-	tools/i386/netboot/ni5010/stage2, tools/i386/netboot/ne2100/nbgrub,
-	tools/i386/netboot/ni6510/pxegrub, tools/i386/netboot/eepro100/stage1,
-	tools/i386/netboot/eepro100/stage2, tools/i386/netboot/ne/nbgrub,
-	tools/i386/netboot/depca/pxegrub, tools/i386/netboot/ne/pxegrub,
-	tools/i386/netboot/w89c840/stage1, tools/i386/netboot/rtl8139/nbgrub,
-	tools/i386/netboot/w89c840/stage2, tools/i386/netboot/sk_g16/pxegrub,
-	tools/i386/netboot/lance/pxegrub, tools/i386/netboot/ni6510/nbgrub,
-	tools/i386/netboot/smc9000/nbgrub, tools/i386/netboot/3c529/pxegrub,
-	tools/i386/netboot/3c595/pxegrub, tools/i386/netboot/ns8390/pxegrub,
-	tools/i386/netboot/epic100/pxegrub, tools/i386/netboot/3c509/nbgrub: New
-	version of grub (0.91) with allstage and pxegrub
-
-	* tools/i386/netboot/3c507/pxegrub, tools/i386/netboot/3c507/stage1,
-	tools/i386/netboot/3c507/stage2, tools/i386/netboot/3c503/nbgrub,
-	tools/i386/netboot/3c503/pxegrub, tools/i386/netboot/3c507/nbgrub,
-	tools/i386/netboot/3c503/stage1, tools/i386/netboot/3c503/stage2:
-	Fixning some file missing in netboot
-
-2002/02/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed obsoletes management according to urpmi code.
-
-2002/02/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ga.po, share/po/cy.po, share/po/is.po, share/po/ar.po,
-	share/po/sl.po, share/po/ro.po: Instead of temporary removingfiles from
-	CVS put a rule in Makefile to
-	don't use them (thanks Thierry)
-	updated some po files; removed the ones too lowly translated for the 8.2
-
-	* share/po/pt_BR.po: updted Brazilian file
-	updated some po files; removed the ones too lowly translated for the 8.2
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/az.po,
-	share/po/ru.po, share/po/hr.po, share/po/ko.po, share/po/nl.po,
-	share/po/ja.po, share/po/sv.po, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/bs.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated some po files; removed the ones
-	too lowly translated for the 8.2
-
-	* share/po/vi.po: updated Vietnamese file
-	updated some po files; removed the ones too lowly translated for the 8.2
-
-	* share/po/Makefile: Instead of temporary removingfiles from CVS put a
-	rule in Makefile to
-	don't use them (thanks Thierry)
-
-2002/02/14  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/lsnetdrake: adapt to the neater network::smb and network::nfs
-
-	* network/smbnfs.pm, network/smb.pm, network/nfs.pm: cleaner & OOed code,
-	with more code sharing
-
-	* interactive.pm: if testing, don't use kdesu
-
-	* install_steps.pm: gzip report.bug
-
-	* interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text
-	feature
-
-	* standalone/diskdrake: fix expert and testing options handling
-
-	* my_gtk.pm (ctree_set_icon): new function
-
-	* c/stuff.xs.pm: undef'ing some macros used by 2 independent sources et
-	still needed :-(
-	#include iconv.h is needed even when C_RPM is undefined
-
-	* diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a
-	mount-point is associated are coming
-
-2002/02/14  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/br.po: update
-	convert to utf-8
-
-	* standalone/drakxtv: uses xawtv internal strings instead of frequencies
-	tables ids as values
-	in %freqtables in order to enhance drakxtv robustness when
-	translators'll
-	arrive. thus we'll pass right strings to scantv instead of translated
-	ones
-	explain how we manage the "all frequencies" case
-	display sorted tv norms
-
-2002/02/13  erwan
-
-	* tools/i386/netboot/device.map, tools/i386/netboot/makeImages: Adding
-	missing file on netboot
-
-	* tools/i386/netboot/make_boot_network, tools/i386/netboot/grub: updating
-	grub in netboot
-
-2002/02/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: avoid generating headers for copying file in
-	postinstall-rpm directory.
-	make sure not to crash if a package that should have been in CD1 is
-	somewhere
-	else.
-	fixed stupid typo.
-	removed all @needToCopy... variables and now use INSTALL category in
-	rpmsrate.
-
-	* share/rpmsrate: updated INSTALL category with the merge of DrakX
-	obsoleted list (it will use
-	INSTALL now :-)
-
-	* pkgs.pm: added extension to setSelectedFromCompssList.
-
-	* share/rpmsrate.server: synced INSTALL category with standard rpmsrate.
-
-2002/02/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Danish and Hungarian files
-
-	* share/po/da.po: updated Danish file
-	updated Danish and Hungarian files
-
-2002/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* network/nfs.pm: $server->{ip} is no more mandatory
-
-	* network/smb.pm: don't show shares ending with "$"
-	$server->{ip} is no more mandatory
-
-	* any.pm (setupBootloader): switch from "list" to "combo"
-
-	* fs.pm (fstab_to_string): unsetting mount points in standalone will now
-	work
-	  - handle WORM type in /proc/scsi/scsi
-	  - added media_type cdrom-burner
-	  - adapting to new media_type
-	  - nicer fd&hd testing
-
-	* diskdrake/smbnfs_gtk.pm: have the fstab entries shown by default
-
-	* detect_devices.pm, diskdrake/interactive.pm: 
-	  - handle WORM type in /proc/scsi/scsi
-	  - added media_type cdrom-burner
-	  - adapting to new media_type
-	  - nicer fd&hd testing
-
-2002/02/13  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: When one visited the help page of a remote CUPS printer
-	afterwards the full
-	printer modification menu was shown, not only the one for remote CUPS
-	printers. This is fixed now.
-
-2002/02/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po, share/po/DrakX.pot: updated Czech and Walloon files
-
-	* share/po/cs.po: updated Czech file
-	updated Czech and Walloon files
-
-2002/02/12  Pixel  <pixel@mandrakesoft.com>
-
-	* devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/
-
-2002/02/12  Till Kamppeter <till@mandrakesoft.com>
-
-	* detect_devices.pm: In the USB auto-detection checked whether and where
-	the device node was
-	created.
-
-2002/02/12  dam's  <damien@mandrakesoft.com>
-
-	* share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
-	share/themes/mdk-check_on.png, share/step-green-click.xpm,
-	share/step-green.xpm, share/step-red-click.xpm,
-	share/themes/mdk-check_off.png: new gfx
-
-	* standalone/drakbackup, network/network.pm: bug correction
-
-2002/02/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/12  Pixel  <pixel@mandrakesoft.com>
-
-	* devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/
-
-	* docs/README.pxe: cleanup the .cfg
-
-	* share/rpmsrate: 
-	  - move bootsplash from SYSTEM to X
-	  - lower Aurora
-
-2002/02/12  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed:
-	  - Endless loop when entering printerdrake during installation in
-	recommended
-	mode without local printer
-	  - Printerdrake was not closed when one was in the "Add Printer"
-	sequence
-	  during installation and one clicked another installation item (entries
-	  on left hand side)
-	  - When configuring printing only after installation Printerdrake tried
-	to
-	  check the installed queues without Foomatic being installed (bug was
-	  already in 8.1, but noone discovered it).
-	  - CUPS died when one tried to add a (local) printer in recommended
-	mode
-	  after installation.
-	  - Improved text for the dialog telling that no local printer was
-	detected.
-	  - The list of auto-detected printers appeared as drop-down menu and
-	not as
-	  a list.
-
-	* detect_devices.pm: In the USB auto-detection checked whether and where
-	the device node was
-	created.
-	Fixes on device auto-detection:
-	  - Made USB printer auto-detection routine in "detect_devices.pm"
-	creating
-	the appropriate device nodes (needed for USB printers being recognized
-	  during installation).
-	  - Fixed "devices.pm" to be able to handle device files with numbers
-	geater
-	  than 9 (ex: /dev/usb/lp10).
-
-	* standalone/printerdrake: 
-	  - Assure that Foomatic is installed before checking existing printer
-	queues.
-
-	* devices.pm: Fixes on device auto-detection:
-	  - Made USB printer auto-detection routine in "detect_devices.pm"
-	creating
-	the appropriate device nodes (needed for USB printers being recognized
-	  during installation).
-	  - Fixed "devices.pm" to be able to handle device files with numbers
-	geater
-	  than 9 (ex: /dev/usb/lp10).
-
-	* printer.pm: Added forgotten '$prefix'es.
-	Fixed:
-	  - Endless loop when entering printerdrake during installation in
-	recommended
-	mode without local printer
-	  - Printerdrake was not closed when one was in the "Add Printer"
-	sequence
-	  during installation and one clicked another installation item (entries
-	  on left hand side)
-	  - When configuring printing only after installation Printerdrake tried
-	to
-	  check the installed queues without Foomatic being installed (bug was
-	  already in 8.1, but noone discovered it).
-	  - CUPS died when one tried to add a (local) printer in recommended
-	mode
-	  after installation.
-	  - Improved text for the dialog telling that no local printer was
-	detected.
-	  - The list of auto-detected printers appeared as drop-down menu and
-	not as
-	  a list.
-
-2002/02/11  dam's  <damien@mandrakesoft.com>
-
-	* share/list: added modinfo
-
-	* network/netconnect.pm: added cancel for first step
-
-2002/02/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: fixed syntax error...
-
-	* Xconfigurator.pm: avoid testing fbdev driver.
-
-	* install_steps.pm: added Aurora or bootsplash for getting a need on frame
-	buffer.
-	added fbdev for GeForce Integrated.
-
-2002/02/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po, share/po/vi.po, share/po/hu.po: updated Danish,
-	Hungarian and Vietnamese files
-
-2002/02/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: booh, fpons was faster than me on "bootsplash wanting
-	fb". Keeping my solution ;p
-
-	* c/stuff.xs.pm: "standard_charset" and "iconv" are needed even when C_RPM
-	is undefined
-
-	* any.pm: allow to edit the initrd field (thx to randy.k.wilson)
-
-	* install_any.pm (@needToCopy): add "ntp"
-
-2002/02/11  warly
-
-	* share/rpmsrate: remove dev from INSTALL, the sun is rising, and there
-	are no more needs to have ppp in the INSTALL section, as the darkness is
-	going away...
-
-2002/02/10  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: in case there is both ata66 (hde) and ata33 hard drives, go to
-	expert
-	questions directly (it would need a semi_auto asking on which drive the
-	bios
-	boots...)
-
-2002/02/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-2002/02/09  daouda
-
-	* share/rpmsrate: 
-	  - add rfbdrake to NETWORKING_REMOTE_ACCESS and
-	NETWORKING_REMOTE_ACCESS_SERVER
-
-2002/02/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help.pm file
-
-	* share/po/fi.po, share/po/DrakX.pot, share/po/help_xml2pm.pl,
-	share/po/es.po, share/po/fr.po, share/po/sv.po, share/po/da.po,
-	share/po/de.po, share/po/hu.po, share/po/it.po, share/po/eu.po: merged
-	with the manual help
-
-2002/02/09  warly
-
-	* share/rpmsrate: add ppp in INSTALL
-	add dev in INSTALL
-
-2002/02/08  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/wiz_drakgw.png, pixmaps/wiz_default_up.png,
-	pixmaps/wiz_firewall.png, pixmaps/wiz_draknet.png: new gfx
-
-	* network/network.pm: corrected wireless modules
-
-2002/02/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/locales-skeleton.tar.bz2: Added choice of charset for
-	various languages
-
-2002/02/08  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/SHORTCUTS: add F1 & F2
-
-2002/02/08  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added instructions for scanning on HP's MF devices to
-	the printer help page.
-	HP PhotoSmart printers do not scan, so do not show how to scan with
-	them.
-	Do not let dialogs of network configuration correction appear embedded
-	in the "Add printer" wizard.
-	Completed wizard mode for adding a printer in both recommended and
-	expert mode.
-
-	* printer.pm: Enabled transferring queues of HP multi-function devices
-	between spoolers.
-	CUPS 1.1.13 dies on SIGHUP, do normal restart instead.
-	Completed wizard mode for adding a printer in both recommended and
-	expert mode.
-
-2002/02/08  warly
-
-	* share/rpmsrate: add bootsplash in system 4
-
-2002/02/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm: fix error causing a bad window sizing when there is
-	a horiz scroll
-
-2002/02/07  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: fixed shadow when testing X
-
-2002/02/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/help_xml2pm.pl: fixed email address
-
-2002/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm: 
-	  - don't pop the "do you want to install samba?"
-	  - rwindow is not a window when embedded, so set_default_size only if
-	possible
-
-	* my_gtk.pm: make perl_checker happy
-	ensure no more than one child is in the Plug
-
-	* interactive.pm: fix (causing XFdrake to use a combo instead of a list)
-
-	* interactive_gtk.pm: fix error causing a bad window sizing when there is
-	a horiz scroll
-	(exit): ensure USR1 is sent to mcc
-
-	* Xconfigurator.pm: allow to edit the hsyncrange and vsyncrange when
-	choosing monitor "Custom"
-
-	* install2.pm, install_steps.pm: create and use miscellaneousAfter (so
-	that SECURE_LEVEL is set *after* asking)
-
-	* diskdrake/interactive.pm (Options): wrap the help text
-
-	* standalone/diskdrake: handle --embedded xxx xxx
-
-2002/02/07  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakxtv, Makefile.config: add drakxtv (scantv gui)
-
-	* standalone/localedrake: fix pixel stuff: don't restart wm on cancel
-
-2002/02/07  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: beta 2
-
-	* printerdrake.pm: corrected wizard pb
-
-	* my_gtk.pm: wizard fixes
-
-2002/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount): precise the type when mounting in standalone (for smb,
-	nfs would not need it)
-
-	* diskdrake/smbnfs_gtk.pm: 
-	  - don't pop the "do you want to install samba?"
-	  - rwindow is not a window when embedded, so set_default_size only if
-	possible
-
-	* interactive.pm: fix (causing XFdrake to use a combo instead of a list)
-
-	* my_gtk.pm: ensure no more than one child is in the Plug
-
-	* standalone/diskdrake: handle --embedded xxx xxx
-
-	* interactive_gtk.pm (exit): ensure USR1 is sent to mcc
-
-2002/02/06  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: removed ugly pink and ugly left bar for wizard mode
-
-2002/02/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem, tools/oem-prepare: better handling of group linked
-	to hardware or options.
-
-2002/02/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: have frozen-bubble in GAMES at level 4
-
-2002/02/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po, share/po/fi.po, share/po/DrakX.pot: updated French file
-
-2002/02/06  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Automatic configuration of the scanning part of HP's
-	multi-function devices.
-
-	* printerdrake.pm: Added some stuff for the Wizard mode.
-	Automatic configuration of the scanning part of HP's multi-function
-	devices.
-	Updated automatic package installation in printerdrake, no "kups" and
-	"qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also
-	"rpmsrate" and "rpmsrate.server" appropriately.
-
-	* share/rpmsrate.server, share/rpmsrate: Added scanning packages to
-	INSTALL section, for HP MF device installation by printerdrake.
-	Updated automatic package installation in printerdrake, no "kups" and
-	"qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also
-	"rpmsrate" and "rpmsrate.server" appropriately.
-
-2002/02/05  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for
-	HP's multi-function devices.
-
-2002/02/05  dam's  <damien@mandrakesoft.com>
-
-	* standalone/logdrake: wizard updated
-	correction for mcc.
-
-2002/02/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate.server: synced with normal rpmsrate for Basque
-	management.
-
-	* install2.pm: auto_allocate for oem mode is not needed as oem script
-	create all necessary partition.
-
-	* install_any.pm: add support for Basque (no KDE).
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: newer syslinux 1.67.
-
-	* share/rpmsrate: add support for Basque (no netscape in such case)
-
-	* rescue/tree/etc/oem: select preferred kernel as kernel-\d.
-
-	* install_steps.pm: fixed logic, when someone want /root/drakx,
-	it has to check /root/drakx and not /root only.
-
-2002/02/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/tree/sbin/modprobe: don't do insmod -f, it's not really necessary
-	and it taints the kernel (pabo)
-
-	* rescue/tree/etc/profile: use LD_LIBRARY_PATH in rescue so that PATH'ing
-	in /mnt
-	can really be used
-
-2002/02/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/es.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/05  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: fix "help lilo when there is hdd with no hdc drive"
-
-	* Xconfigurator.pm: testFinalConfig now always returns true if test is
-	skipped because of a bad_card (back to the old behaviour, this was no
-	good (the aim is to enable changing the monitor when test is skipped))
-
-	* share/po/fr.po: fix "Details" translated in "D�tails de la partition"
-	but is used at different
-	place where the meaning has nothing to do with "partitions"
-
-2002/02/05  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for
-	HP's multi-function devices.
-
-2002/02/05  warly
-
-	* share/compssUsers.server: remove non server group from rpmsrate.server
-	add utilities group in compssUser.server
-	(webmin,ssh-server,wizards,monitoring)
-
-	* share/rpmsrate.server: begin rpmsrate.server cleaning
-
-2002/02/05  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: fix "help lilo when there is hdd with no hdc drive"
-
-	* Xconfigurator.pm: testFinalConfig now always returns true if test is
-	skipped because of a bad_card (back to the old behaviour, this was no
-	good (the aim is to enable changing the monitor when test is skipped))
-
-2002/02/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: log the "chkconfig --del gpm" when there is a serial
-	mouse
-
-2002/02/04  dam's  <damien@mandrakesoft.com>
-
-	* standalone/logdrake: corrected typo. Yvounet, check your code!!
-	embedded, explain
-
-	* my_gtk.pm: bug correction
-
-	* standalone/drakfont, services.pm, network/netconnect.pm: applied cooker
-	guy english review
-
-2002/02/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added v4l module all the time (along with dbe already
-	present).
-
-2002/02/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps.pm: have numlock activated when isLaptop rather than
-	$o->{pcmcia}
-
-2002/02/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po,
-	share/po/DrakX.pot, share/po/th.po, share/po/es.po, share/po/fr.po,
-	share/po/sr.po, share/po/el.po, share/po/et.po, share/po/sk.po,
-	share/po/tr.po, share/po/eu.po, share/po/sl.po, share/po/vi.po,
-	share/po/uk.po, share/po/eo.po, share/po/nl.po, share/po/wa.po,
-	share/po/sv.po, share/po/zh_TW.po: updated some po files
-
-2002/02/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: fix creating /etc/security/msec/server
-
-	* share/po/fr.po: fix "More" translation
-
-2002/02/04  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Made HP multi-function devices configured
-	with HPOJ being displayed correctly by printerdrake.
-
-	* detect_devices.pm: Replace "Hewlett-Packard" by "HP" when HP device is
-	detected on a parallel port.
-
-2002/02/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: update french translations
-
-2002/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: force a few more "list"s instead of "combo" boxes
-	since "format" is now handled for combo boxes, combo boxes are used in
-	much too many places. Fix this by forcing type "list" for some cases,
-	and using type "list" when a ask_from has only one entry
-
-	* interactive.pm: since "format" is now handled for combo boxes, combo
-	boxes are used in much too many places. Fix this by forcing type "list"
-	for some cases, and using type "list" when a ask_from has only one entry
-
-	* bootloader.pm: 
-	  - fix some vga text modes 80x30
-	  - chmod 600 lilo.conf when a password is given
-	  - fix general "append"
-	(thanks to David Eastcott)
-	"password" works without "restricted", not the other way round (reported
-	by David Eastcott)
-	fix typo
-
-2002/02/03  warly
-
-	* share/rpmsrate.server: synchronize with current cooker rpmsrate
-
-2002/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: force a few more "list"s instead of "combo" boxes
-	since "format" is now handled for combo boxes, combo boxes are used in
-	much too many places. Fix this by forcing type "list" for some cases,
-	and using type "list" when a ask_from has only one entry
-
-	* interactive.pm: since "format" is now handled for combo boxes, combo
-	boxes are used in much too many places. Fix this by forcing type "list"
-	for some cases, and using type "list" when a ask_from has only one entry
-
-	* bootloader.pm: fix typo
-	help lilo when there is hdd with no hdc drive (needs testing!)
-
-2002/02/03  warly
-
-	* share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and
-	compssUsers.server
-
-2002/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: help lilo when there is hdd with no hdc drive (needs
-	testing!)
-
-2002/02/03  warly
-
-	* share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and
-	compssUsers.server
-
-2002/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: XFree is now 4.2
-
-	* standalone/fileshareset: fix dropping samba sections which don't have
-	any "path="
-
-2002/02/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po, share/po/DrakX.pot: updated Swedish file
-
-	* share/po/fr.po: merged again French file to recover some lost strings;
-	and added non breakable spaces at all the needed places as required
-	by French typography
-
-2002/02/01  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm: please perl_checker
-
-	* install_interactive.pm: use from_Mb for choosing the size of the windows
-	partition
-
-	* install_steps.pm: create symlink /etc/security/msec/server in security >
-	3
-
-2002/02/01  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: First steps of the implementation for the "Add printer"
-	wizard.
-
-	* detect_devices.pm: Made auto-detection working for HP DeskJet 840C on
-	USB
-	General improvements for reliability of USB printer auto-detection
-
-2002/02/01  yduret
-
-	* pixmaps/wiz_scannerdrake.png: readding it with -kb option (i am still
-	jeune and boulet)
-	rm for readding with -kb option (i am jeune and boulet)
-
-	* standalone/logdrake: ergo fix thx dadou report
-	fix --explain=foo bug that prevent to show anything
-
-	* bootlook.pm: ergo fix thx dadou report...
-
-2002/02/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* services.pm, standalone/drakbackup, printerdrake.pm,
-	standalone/logdrake: changed some strings to make translation easier
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/01  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm: please perl_checker
-
-	* install_interactive.pm: use from_Mb for choosing the size of the windows
-	partition
-
-	* Xconfigurator.pm: testFinalConfig now returns false if test is skipped
-	because of a bad_card or
-	verybad_card and $skip_badcard is not set
-
-2002/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/keyboards.tar.bz2, keyboard.pm: Added Tamil language and
-	keyboard choices (KDE is translated to Tamil)
-
-2002/01/31  yduret
-
-	* pixmaps/wiz_scannerdrake.png: on rajoute la zolie image
-
-2002/01/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* Xconfigurator.pm: Added setting of model=jp106 for Japanese keyboard
-
-	* keyboard.pm, share/keyboards.tar.bz2: Added Bulgarian "phonetic"
-	keyboard
-
-	* lang.pm: Enabled "ms" language in the language selection list (there are
-	Gnome and KDE
-	translations for it)
-
-	* share/po/be.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po,
-	share/po/es.po, share/po/bg.po, share/po/de.po, share/po/et.po,
-	share/po/el.po, share/po/ru.po, share/po/br.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/nl.po, share/po/ro.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po:
-	updated some po files
-
-2002/01/30  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add gnome-core in GNOME (used to be required?)
-
-	* Xconfigurator_consts.pm, Xconfigurator.pm: move "what is the
-	running_window_manager" and "ask_window_manager_to_logout" to any.pm
-
-	* any.pm (ask_window_manager_to_logout, running_window_manager): created
-	from Xconfigurator and cleaned
-	(selectLanguage): if $langs is empty, don't ask for "other languages"
-
-	* pixmaps/wiz_printerdrake.png: re-adding with -kb
-	removing for re-adding with -kb
-
-	* standalone/localedrake: now works in normal user: it modifies the
-	~/.i18n (todo: handle kde crazy variables?)
-
-	* lang.pm: handle read'ing and write'ing to a specified file (useful
-	example: ~/.i18n)
-
-2002/01/30  sdupont
-
-	* standalone/drakbackup: complex merging....
-	change /var/drakbackup to /var/lib/drakbackup
-	crontab update
-	mail report update
-	sendmail update
-	require rpm mode
-	code optimisation
-	remove about gi
-	new help function
-
-2002/01/29  Till Kamppeter <till@mandrakesoft.com>
-
-	* pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of
-	printerdrake.
-
-	* printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer"
-	wizard.
-	Improvements for the selection of a local printer, especially when no or
-	one printer was detected.
-
-2002/01/29  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: icons placements are better
-
-2002/01/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakbug_report, standalone/drakautoinst, install2.pm,
-	install_any.pm, install_steps.pm, log.pm, docs/README, pkgs.pm: move
-	/root/* files (ddebug.log, install.log, report.bug,
-	auto_inst.cfg.pl, replay_install.img) to /root/drakx/,
-	and also save stage1.log there
-
-	* partition_table_raw.pm: add new pixel-made grub signature
-
-	* crypto.pm: update land2tzs accordingly to new url2land
-	Add url2land entries for nl, it, at
-
-	* any.pm: move /root/* files (ddebug.log, install.log, report.bug,
-	auto_inst.cfg.pl, replay_install.img) to /root/drakx/,
-	and also save stage1.log there
-	rephrase a little bit highest level
-	to not refer to "level 4" anymore
-	use formatAlaTeX for describing security levels
-
-	* install_steps_interactive.pm: fix thanks to chipaux msg about mkbootdisk
-
-2002/01/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po, share/po/sv.po, share/po/hr.po, share/po/de.po,
-	share/po/DrakX.pot, help.pm, share/po/it.po, share/po/eu.po,
-	share/po/es.po: updated pot file with help messages from manual
-
-2002/01/29  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: handle "format" for combo's
-
-	* bootloader.pm: use the new format for combo's to clean code handling
-	{vga} field
-
-	* diskdrake/hd_gtk.pm: look diskdrake.rc in another directory
-
-	* any.pm: use the new format for combo's to clean code handling {vga}
-	field
-	handle the case where samba and/or nfs-utils are not installed
-
-	* install_steps.pm: move the various bootloader::add_append's in
-	setupBootloaderBefore
-
-	* diskdrake/smbnfs_gtk.pm: handle the case where samba and/or nfs-utils
-	are not installed
-
-	* install_steps_interactive.pm: visually unselect X and docs when minimal
-	install
-	"With X" choice is now working
-	handle "Cancel" on language selection
-
-2002/01/29  Till Kamppeter <till@mandrakesoft.com>
-
-	* pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of
-	printerdrake.
-
-	* printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer"
-	wizard.
-	Improvements for the selection of a local printer, especially when no or
-	one printer was detected.
-
-2002/01/29  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* interactive.pm: fix pixel's minimal example using interactive.
-
-2002/01/29  yduret
-
-	* docs/interactive/ask_from_list, docs/interactive/wait_message,
-	docs/interactive/ask_from_treelist, docs/interactive/ask_from_listf,
-	docs/interactive/ask_from: added some snipet coe for example
-
-	* standalone/logdrake: logdrake is now under gi/perl-install/standalone
-
-2002/01/29  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/hd_gtk.pm: look diskdrake.rc in another directory
-
-	* install_steps.pm: move the various bootloader::add_append's in
-	setupBootloaderBefore
-
-2002/01/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: do the few new translations
-
-	* standalone.pm: try to reflect hierarchy for */*.pm
-
-2002/01/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
-	share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po,
-	printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po,
-	share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po,
-	standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po,
-	share/po/id.po: Corrected various English typos
-
-2002/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: fix typo
-
-	* partition_table.pm: warn if partitions have been renumbered due to a
-	partition being added or removed
-
-	* diskdrake/interactive.pm: don't warn_if_renumbered during install
-	warn if partitions have been renumbered due to a partition being added
-	or removed
-
-2002/01/28  siegel
-
-	* share/po/de.po: new german version
-
-2002/01/28  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Replaced "sleep" commands by a subroutine which waits
-	exactly until CUPS is ready.
-	CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device
-	is not "known" to it.
-
-	* printer.pm: Removed debug helper line.
-	Replaced "sleep" commands by a subroutine which waits exactly until CUPS
-	is ready.
-	CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device
-	is not "known" to it.
-
-2002/01/28  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/br.po: update brezhoneg translations
-
-	* share/po/fr.po: more french translations
-
-2002/01/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
-	share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po,
-	printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po,
-	share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po,
-	standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po,
-	share/po/id.po: Corrected various English typos
-
-2002/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: fix typo
-
-	* diskdrake/interactive.pm, partition_table.pm: warn if partitions have
-	been renumbered due to a partition being added or removed
-
-2002/01/28  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm, network/netconnect.pm: debug network testing
-
-2002/01/28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated color of
-	scroll bar and reduced its size.
-
-	* bootloader.pm: fixed get_append if key=mem.
-	timeout passed to 10 instead of 5.
-
-2002/01/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: update games rates
-
-2002/01/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (remove_advertising): ensure removing /tmp/drakx-images
-	can't fail
-
-	* any.pm: simpler&nicer solution for writing kppprc in utf8
-	have kppprc strings in utf8
-
-	* detect_devices.pm: remove test code
-
-	* install_steps.pm, bootloader.pm: cleanup perImageAppend code (hopefully
-	handling nicely the mem=nopentium case)
-
-	* diskdrake/smbnfs_gtk.pm: don't use wait_message's when waiting (waiting
-	is usually very short), use a waiting cursor instead.
-	(the wait_message's were causing bad interactivity stuff)
-
-2002/01/27  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: add a minimal example
-
-	* services.pm: 
-	  - move the require on my_gtk to ask_standalone_gtk
-	  - cleanup
-
-	* Makefile.config: 
-	  - adapt to new diskdrake modules
-	  - add logdrake to STANDALONEPMS_
-
-	* my_gtk.pm: strange protection against ensure_focus generating a "focus"
-	event causing a
-	dead-loop (reminder: ensure_focus helps ensuring a widget is focused)
-
-	* Makefile.drakxtools, standalone.pm, Makefile, diskdrake_interactive.pm,
-	install_interactive.pm, diskdrake.pm: 
-	  - adapt to new diskdrake modules
-	  - some cleanup in drakxtools build
-
-	* diskdrake/removable.pm: remove debugging code
-	new diskdrake modules (diskdrake_interactive is now
-	diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others
-	created from diskdrake.pm)
-
-	* diskdrake/interactive.pm, diskdrake/hd_gtk.pm,
-	diskdrake/removable_gtk.pm: new diskdrake modules (diskdrake_interactive
-	is now diskdrake::interactive, diskdrake is now diskdrake::hd_gtk,
-	others created from diskdrake.pm)
-
-	* diskdrake/smbnfs_gtk.pm: fix updating the actions
-	new diskdrake modules (diskdrake_interactive is now
-	diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others
-	created from diskdrake.pm)
-
-	* network/nfs.pm: find_exports: add a timeout
-
-	* fs.pm: new function fstab_to_string
-
-	* standalone/diskdrake: handle --removable *and* --removable=<dev>
-	handle --removable=<dev>
-	  - new options --hd, --nfs, --smb, --removable
-	  - adapt to new diskdrake modules
-	  - save $all_hds->{current_fstab} to know if /etc/fstab must be saved
-
-2002/01/25  fabman
-
-	* share/po/es.po: updated spanish translation
-
-2002/01/25  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add devfsd
-
-	* install_any.pm: remove_advertising: use rm_rf since we don't have the
-	real list of files (the .pl's are not in @advertising_images)
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx'
-
-2002/01/25  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Less important options only shown when
-	"Advanced" button clicked.
-	Handling of cursor position in the main window improved.
-	Handling of empty printer queue list in main window improved.
-	Removed line breaks from longer texts, so that text flows into window
-	nicely
-	Minor text improvements.
-
-2002/01/25  dam's  <damien@mandrakesoft.com>
-
-	* install_any.pm: advertising engine updated
-
-	* share/logo-mandrake.png: beta logo
-
-	* install_steps_gtk.pm: corrected decy
-	advertising engine updated
-
-2002/01/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: please find a better fix
-
-2002/01/25  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple
-	linux
-	fix spelling
-
-	* Makefile: call clean-rpmsrate
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx'
-
-2002/01/25  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm, install_any.pm: advertising engine updated
-
-	* share/po/fr.po: typo
-
-	* share/logo-mandrake.png: beta logo
-
-2002/01/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: please find a better fix
-
-2002/01/25  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: ensure errors propagate
-
-	* bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple
-	linux
-	fix spelling
-
-	* Makefile: call clean-rpmsrate
-
-	* mdk-stage1/pci-resource/Makefile: silly shell
-	ensure errors propagate
-
-2002/01/25  dam's  <damien@mandrakesoft.com>
-
-	* share/po/fr.po: typo
-	corrected too long label Mise � niveau deas paquetages seule. please
-	find a better FIX
-
-2002/01/25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: cosmetic changes.
-
-	* pkgs.pm: fixed try opening to trigger changeCD callback.
-
-2002/01/24  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: 
-	  - add msec in any install
-	  - use BIGMEM flag for kernel-enterprise
-	  - use SMP flag for kernel-smp
-	(those 2 goes together with Warly's clean-rpmsrate)
-	add flag DOCS which should work together with !excludedocs
-
-	* any.pm: ensure grub is installed if grub is chosen
-
-	* install_any.pm: 
-	  - add DOCS (based on !excludedocs)
-	  - set BIGMEM and SMP flags
-	(since kernel-smp and kernel-enterprise sub-numbers are better handled
-	by
-	 rpmsrate together with Warly's clean-rpmsrate)
-
-	* install_steps_interactive.pm, install2.pm: minimal install now handles
-	excludedocs
-
-	* install_steps.pm: log excludedocs
-	minimal install now handles excludedocs
-	put devfs=mount only if devfsd is installed
-
-	* diskdrake_interactive.pm: truncate lvm name to 63 characters since
-	longer vg names are not allowed
-
-2002/01/24  Till Kamppeter <till@mandrakesoft.com>
-
-	* detect_devices.pm, printer.pm, printerdrake.pm: Fixed bug of empty menu
-	entry appearing after adding a new printer.
-	Modified "Local Printer" dialog to be more newbie-friendly.
-
-2002/01/23  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm: updated speedtouch code to use pppoa3
-
-	* my_gtk.pm: removed font loading
-
-2002/01/23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: fixed to allow multiple mem=xxx parameter (especially
-	mem=nopentium).
-
-	* install_steps.pm: restored mem=nopentium.
-	removed mem=nopentium.
-
-2002/01/23  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/fileshareset: name mangling max length set to 12
-	use name mangling for samba labels
-
-2002/01/23  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: New user interface in main window
-	More printer info in printer modification window
-	Better support for remote CUPS printers
-
-2002/01/22  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: improved widget_icons
-
-	* install_steps.pm: added net_cnx_pg output when configuring network in
-	auto install
-
-2002/01/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added support to save already existing synthesis file.
-
-	* install_any.pm: changed code to build synthesis file, check if they have
-	not already been copied
-	from mirror, or build them using parsehdlist.
-
-2002/01/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: Translate a few things more
-
-2002/01/22  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: cleanup error messages (and fix diskdrake's)
-	defaults to ext3 instead of ext2
-
-	* interactive.pm: add "quit_if_double_click" and "tree_expanded" flags
-	(request from till)
-	add feature "allow_empty_list" for "list" entries (disables the special
-	cases for 0 and 1 element lists)
-
-	* install_any.pm, diskdrake.pm: cleanup error messages (and fix
-	diskdrake's)
-
-	* install_interactive.pm, raid.pm: defaults to ext3 instead of ext2
-
-	* partition_table.pm: remove unused auto_win_extended stuff
-	handle extended partitions with no partitions inside (esp. for the first
-	hda5 & windows XP)
-
-	* bootloader.pm: 
-	  - fix default not being formatted like labels for lilo
-	  - check the label is not already used *case-sensitively*
-	  - check a kernel_or_dev is given
-
-	* any.pm: 
-	  - remove the default entry when that entry is removed
-	  - use allow_empty_list for displaying the entries
-	  - fix default not being formatted like labels for lilo
-	  - check the label is not already used *case-sensitively*
-	  - check a kernel_or_dev is given
-
-	* fsedit.pm: yet again better error reporting
-	defaults to ext3 instead of ext2
-
-	* standalone/drakboot, bootlook.pm: fix yves's code duplication of
-	lilo_choice (use $::lilo_choice in bootlook)
-
-	* interactive_gtk.pm: add "quit_if_double_click" and "tree_expanded" flags
-	(request from till)
-
-	* install_steps_interactive.pm: cleanup error messages (and fix
-	diskdrake's)
-	better messages for the minimal installs
-
-	* standalone/diskdrake: yet again better error reporting
-	cleanup error messages (and fix diskdrake's)
-
-	* share/rpmsrate: move mandrake-mime from SYSTEM to X
-	lower sndconfig
-
-2002/01/22  fcrozat
-
-	* share/rpmsrate: Really install gnome control center when installing
-	GNOME
-
-2002/01/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: added mem=nopentium for any Athlon or Duron processor.
-
-2002/01/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* Makefile: exclude standalone from testing
-
-	* share/po/fr.po: resolve small conflict
-
-2002/01/22  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: add the new "mii" module to 'net_raw'
-
-	* install_steps_interactive.pm: better messages for the minimal installs
-	fix a few cancel's (reported by slegros)
-	don't ask security level in non-expert
-
-	* install_steps_gtk.pm, install_interactive.pm: fix a few cancel's
-	(reported by slegros)
-
-	* share/rpmsrate: move mandrake-mime from SYSTEM to X
-	lower sndconfig
-
-2002/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing
-
-	* install_steps_interactive.pm, install2.pm: can't call
-	any::config_libsafe so early during install, move it where msec is
-	called
-
-	* any.pm: quiet perl's warning
-
-2002/01/21  dam's  <damien@mandrakesoft.com>
-
-	* install_steps.pm: fixed network conf in auto install
-	corrected network down
-
-	* my_gtk.pm: removed debug print
-	icons widget improvment : icon placment, highlighting
-
-2002/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: increase the size of the "Choose action" box
-
-	* diskdrake_interactive.pm: remove the "Active" partition feature
-
-	* interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing
-
-	* install2.pm: can't call any::config_libsafe so early during install,
-	move it where msec is called
-
-	* install_steps_interactive.pm: can't call any::config_libsafe so early
-	during install, move it where msec is called
-	cleanup, update, enhance security level choice
-
-	* standalone/draksec: cleanup, update, enhance security level choice
-
-	* install_steps.pm: remove deprecated msec groups adding
-	cleanup
-
-	* tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: newer grub
-
-	* any.pm: quiet perl's warning
-	cleanup, update, enhance security level choice
-	when creating users, add handling of xgrp/rpm/adm/wheel groups in high
-	security
-	fix advice about "usermod -G"
-
-	* tools/i386/netboot/menu.lst.example: add gateway parameter
-
-2002/01/21  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: new ugly icon
-
-	* install_steps.pm: corrected network down
-
-2002/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* share/fonts.tar.bz2: add helvR12_iso15
-
-	* install_steps_interactive.pm: """ When I choose a / partition smaller
-	than 200 MB, the installation
-	gives me an error message complaining that my system does not
-	    have enough free space for the installation, although basesystem
-	install
-	    require less than 100 MB. """
-	up to around 250MB, minimal install is chosen.
-	questions are: base system only, or no X, or normal.
-
-2002/01/21  siegel
-
-	* share/po/de.po: updates
-
-	* standalone/drakbackup: fixed i18n bugs
-
-2002/01/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: call msec with run_commands=0 to fix the network reloading
-	(causing various problems, esp. "Net::FTP: Timeout" at X config step)
-
-2002/01/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakbackup: sorry, _("$_") is not allowed
-
-2002/01/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: fix "`msgid' and `msgstr' entries do not both end with
-	'\n'"
-
-	* install2.pm: call msec with run_commands=0 to fix the network reloading
-	(causing various problems, esp. "Net::FTP: Timeout" at X config step)
-
-2002/01/20  yduret
-
-	* timezone.pm: added Italy (time.ien.it) in
-
-2002/01/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: Rework English syntax in drakbackup - hopefully
-	I've got the intent correct ;^)
-
-2002/01/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* detect_devices.pm: Replaced USB printer auto-detection by a more
-	reliable method.
-
-2002/01/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: changed Update -> Upgrade for installation
-	class.
-
-2002/01/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/draknet: 
-	  - move 'use standalone' up to comply to 'explanations'
-	  - fix an english typo, s/connexion/connection/
-
-	* standalone/drakgw: 
-	  - move 'use standalone' up to comply to 'explanations'
-	  - write higher-level 'explanations'
-	  - small fix, s/`ls ..`/glob(..)/
-
-	* standalone/scannerdrake: 
-	  - move 'use standalone' up to comply to 'explanations'
-	  - fix a small english problem
-
-	* share/po/fr.po: reduce a lot of fuzzy and untranslations
-	large stuff from printerdrake, drakbackup and drakfont still to do :-)
-
-	* c/stuff.xs.pm, standalone/printerdrake, standalone/net_monitor,
-	standalone/drakautoinst, standalone/keyboarddrake,
-	standalone/localedrake, standalone/livedrake, standalone/drakboot,
-	standalone/draksec, standalone/tinyfirewall, standalone/mousedrake,
-	standalone/drakxservices, standalone.pm, standalone/drakproxy,
-	standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake,
-	standalone/drakxconf, log.pm, standalone/logdrake,
-	standalone/drakbackup, standalone/drakfont: 
-	  - write the 'common' part of the 'explanations' stuff,
-	with nice help from Pixel for the tough Perl part
-	  - move 'use standalone' up in all standalone apps,
-	  to comply to 'explanations'
-
-2002/01/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2,
-	share/fonts.tar.bz2: changes to get in line with new XFree86
-
-2002/01/18  Pixel  <pixel@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11
-	locale on the box so that XI18N_OBJS's and common are included
-
-2002/01/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: add update flag for urpmi medium.
-
-	* install_steps_interactive.pm: even if user cancel update of package on
-	tree, allow urpmi to install the medium.
-	avoid downNetwork as no difference are made between ethernet or ppp.
-	fixed typo.
-	allow cancel when installUpdates.
-
-	* crypto.pm: add update medium for crypto for urpmi (flag update).
-	fixed typo.
-	allow selection/deselection of update medium (for cancel of
-	installation).
-
-	* install_steps_gtk.pm: allow choosePackageTree to display a cancel if a
-	specific medium has been given.
-
-2002/01/18  Pixel  <pixel@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11
-	locale on the box so that XI18N_OBJS's and common are included
-
-2002/01/18  sdupont
-
-	* standalone/drakfont: update warning messages (qa).
-
-	* standalone/drakbackup: fix traduction problems and more ...
-
-2002/01/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm, diskdrake_interactive.pm: better error message when auto
-	allocate doesn't do anything
-
-2002/01/17  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm, network/netconnect.pm: draknet : success message only
-	if success
-
-	* my_gtk.pm: added timeout for redrawing icon widget
-
-2002/01/17  fcrozat
-
-	* share/rpmsrate: kdebase-nsplugins will be installed by default when
-	selecting KDE
-
-2002/01/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: avoid upgrading a package by selection on files unless it has
-	been obsoleted.
-
-2002/01/17  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: check the mountpoint is valid for encrypting (disallow "/"
-	and "/usr")
-
-	* fsedit.pm, diskdrake_interactive.pm: better error message when auto
-	allocate doesn't do anything
-	check the mountpoint is valid for encrypting (disallow "/" and "/usr")
-
-	* fs.pm: do not create /swap
-
-	* services.pm: move service apcupsd from Printing to System
-
-	* bootloader.pm: fix many disks bios remapping (esp. booting on scsi when
-	ide is present)
-
-2002/01/17  sdupont
-
-	* standalone/drakbackup: stable version for qa pkg.
-	(without unstables options)
-
-2002/01/16  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix cancel on scsi module loading
-
-2002/01/16  sdupont
-
-	* standalone/drakbackup: update send mail.
-	(pixel mode. ;))
-
-2002/01/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: installUpdates: use formatAlaTeX
-
-2002/01/16  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix cancel on scsi module loading
-
-	* install_steps_interactive.pm: don't drop default_packages in "Base
-	system only"
-
-	* standalone/fileshareset: add locking to ensure things are in a proper
-	state
-
-2002/01/15  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: advertising engine amelioration
-
-	* my_gtk.pm: automatic icon placement in icon_labels_widget
-
-2002/01/15  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: remove the test trick
-	encrypted filesystem handling:
-	  - using losetup
-	  - add "Options" for partitions in diskdrake (expert mode)
-
-	* c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm,
-	diskdrake.pm: encrypted filesystem handling:
-	  - using losetup
-	  - add "Options" for partitions in diskdrake (expert mode)
-
-2002/01/15  dam's  <damien@mandrakesoft.com>
-
-	* network/isdn_consts.pm: updated
-
-2002/01/15  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: remove the test trick
-	encrypted filesystem handling:
-	  - using losetup
-	  - add "Options" for partitions in diskdrake (expert mode)
-
-	* c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm,
-	diskdrake.pm: encrypted filesystem handling:
-	  - using losetup
-	  - add "Options" for partitions in diskdrake (expert mode)
-
-	* any.pm: have ddcxinfos take the best result of every run
-
-2002/01/15  sdupont
-
-	* standalone/drakfont: fix progress bar problem.
-	some gi updates:
-	  - windows font importation.
-	 - advanced font importation.
-	 - licence interface.
-	 - ...
-
-	* standalone/drakbackup: new ./drakbackup --show-conf
-	fix daemon problem (media to use).
-	update informations on drakbackup report mail.
-	__ 3290 lines.
-	man pages fr created.
-	some code cleaning on backend mode. (all_user_list && return_path)
-	new functions on backend mode:
-		- show-conf
-		- debug
-	        - help
-	        - version.
-
-2002/01/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: 
-	  - eata is SCSI adapter, not 'disk' adapter
-	  - have eata module in boot floppies
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: we need also "big" modules in
-	pci ids
-
-	* share/rpmsrate: have lbreakout weigthed 4 instead of 2
-
-	* mdk-stage1/modules.c: suggest other.img in file-not-found-in-archive
-	(sugg David Faure
-	and Pixel)
-
-2002/01/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: fix typo (making auto installs working again)
-
-2002/01/13  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: s/lbreakout/lbreakout2/
-
-	* install_steps_interactive.pm: cleanup
-
-2002/01/13  sdupont
-
-	* standalone/drakbackup: some updates ...
-	in "more option" steps user could choose to receive a report by mail for
-	each backups.
-	ftp backup work.
-	fix time problems.
-	remove doc from file.
-	security fix for configuration file.
-
-2002/01/11  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: advertising engine works !
-	champagne.
-	still some display bugs, but they will be corrected later.
-	need new ads and adequat description file
-	new advertising engine
-
-	* install_any.pm: modifications for new avertising engine
-
-	* my_gtk.pm: new icons placement
-
-2002/01/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/th.po, share/po/es.po, share/po/fr.po, share/po/sr.po,
-	share/po/de.po, share/po/el.po, share/po/et.po, share/po/sk.po,
-	share/po/tr.po, share/po/ar.po, share/po/az.po, share/po/eu.po,
-	share/po/sl.po, share/po/vi.po, share/po/eo.po, share/po/wa.po,
-	share/po/sv.po, share/po/zh_TW.po, share/po/Makefile, share/po/af.po,
-	share/po/it.po: updated Spanish file; merged help-* files
-
-2002/01/11  sdupont
-
-	* standalone/drakbackup: update header pixmaps.
-	correction of message problem.
-
-	* pixmaps/drakfont.620x57.png, pixmaps/BDO-drakebackup1.png,
-	pixmaps/drakbackup.540x57.png: update pixmaps for drakbakup & drakfont.
-
-	* standalone/drakfont: update header pixmaps.
-
-2002/01/10  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: domainname corection
-
-	* network/network.pm: domainname corection
-	corrected network domainname pb
-
-	* install2.pm: corrected read_resolv => read_conf
-
-2002/01/10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: english taste inspired by daminette.
-
-2002/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/lsparts: better looking output of type of partition (%x => %0x)
-
-2002/01/09  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, standalone/net_monitor, standalone/draknet,
-	network/network.pm, network/modem.pm, network/netconnect.pm: big merge
-	from update 8.1 with cvs
-	First part. Part 2 following
-
-	* my_gtk.pm: added bold option in text creation. Some corrections
-
-	* install_steps_interactive.pm: corrected fpons typo
-
-2002/01/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed too many package selected for No X or With X
-	option of minimal installation.
-
-	* install_steps_interactive.pm: avoid asking for minimal install for
-	upgrade.
-
-	* crypto.pm: fix incomplete prefix for update mirror when adding an entry
-	for urpmi.
-
-	* pkgs.pm: use rpm version comparison function.
-
-	* c/stuff.xs.pm: added rpmvercmp.
-
-2002/01/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed too many package selected for No X or With X
-	option of minimal installation.
-
-	* install_steps_interactive.pm: avoid asking for minimal install for
-	upgrade.
-
-	* crypto.pm: fix incomplete prefix for update mirror when adding an entry
-	for urpmi.
-
-	* pkgs.pm: use rpm version comparison function.
-
-	* c/stuff.xs.pm: added rpmvercmp.
-
-2002/01/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed too many package selected for No X or With X
-	option of minimal installation.
-
-	* install_steps_interactive.pm: avoid asking for minimal install for
-	upgrade.
-	fixed stupid.
-
-	* crypto.pm: fix incomplete prefix for update mirror when adding an entry
-	for urpmi.
-
-	* pkgs.pm: use rpm version comparison function.
-
-	* c/stuff.xs.pm: added rpmvercmp.
-
-2002/01/08  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: cosmetik
-
-2002/01/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: added eval around pixmap drawing for advertising.
-
-2002/01/08  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakbackup: another round of bad use of _() fixes.
-	fixed bad use of _().
-
-2002/01/08  sdupont
-
-	* standalone/drakbackup: drakbackup work ...
-	incremental backup and restore work.
-
-2002/01/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Makefile: again fixed dam's sucking, please dam's check what you write
-	before commiting.
-
-	* standalone/drakautoinst: removed stupid invocation of _("$_"), is it
-	correct code to change it to $_ only ?
-
-2002/01/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Makefile: again fixed dam's sucking, please dam's check what you write
-	before commiting.
-
-	* standalone/drakautoinst: removed stupid invocation of _("$_"), is it
-	correct code to change it to $_ only ?
-
-2002/01/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Makefile: again fixed dam's sucking, please dam's check what you write
-	before commiting.
-
-2002/01/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* steps.pm: changed installUpdates after summary (to get corrected
-	timezone).
-
-	* install_any.pm: separated setDefaultPackages from setPackages because it
-	is used by allowing
-	only base system to be installed (allow remade a better package
-	selection).
-
-	* crypto.pm: added bestMirror method to retrieve a good mirror (according
-	to timezone) and
-	add salt with random number to avoid using always the same.
-
-	* install2.pm: added option to only upgrade packages.
-
-	* install_steps_interactive.pm: added minimal type of install support.
-
-	* share/list: fixed to match newer menu package.
-
-2002/01/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* steps.pm: changed installUpdates after summary (to get corrected
-	timezone).
-
-	* install_any.pm: separated setDefaultPackages from setPackages because it
-	is used by allowing
-	only base system to be installed (allow remade a better package
-	selection).
-
-	* crypto.pm: added bestMirror method to retrieve a good mirror (according
-	to timezone) and
-	add salt with random number to avoid using always the same.
-
-	* install2.pm: added option to only upgrade packages.
-
-	* install_steps_interactive.pm: added minimal type of install support.
-
-	* share/list: fixed to match newer menu package.
-
-2002/01/07  dam's  <damien@mandrakesoft.com>
-
-	* Makefile: socmetic
-	typo
-	added debug mode for the whole install
-
-	* my_gtk.pm: removed print
-	new pack_start functions, powerpack sub added (code from adrien)
-	incorporated adrien's code to generalize pack functions
-	minor bug fixes
-
-	* install_steps.pm, network/netconnect.pm: corrected network connection
-	during install
-
-	* install2: added debug mode for the whole install
-
-2002/01/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* steps.pm: changed installUpdates after summary (to get corrected
-	timezone).
-
-	* install_any.pm: separated setDefaultPackages from setPackages because it
-	is used by allowing
-	only base system to be installed (allow remade a better package
-	selection).
-
-	* crypto.pm: added bestMirror method to retrieve a good mirror (according
-	to timezone) and
-	add salt with random number to avoid using always the same.
-
-	* install2.pm: added option to only upgrade packages.
-
-	* install_steps_interactive.pm: added minimal type of install support.
-
-	* share/list: fixed to match newer menu package.
-
-	* Makefile: fixed overwriting of install2 filtering, keep diagnostic and
-	strict for debug mode.
-
-2002/01/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: also log server name for HTTP install
-
-2002/01/04  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, install_steps.pm, network/tools.pm, my_gtk.pm,
-	network/netconnect.pm: corrected minor bugs in network (among others bug
-	"modifying read only values")
-	recode upNetwork and downNetwork (it might work, at least if you are
-	lucky);
-
-2002/01/04  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: corrected minor bugs in network (among others bug "modifying
-	read only values")
-	recode upNetwork and downNetwork (it might work, at least if you are
-	lucky);
-	corrected font display : no useless font->height, but ascent + descent
-	updated
-
-	* network/isdn_consts.pm: changed asus isdn hisax identify
-
-	* network/adsl.pm, install_steps.pm, network/tools.pm,
-	network/netconnect.pm: corrected minor bugs in network (among others bug
-	"modifying read only values")
-	recode upNetwork and downNetwork (it might work, at least if you are
-	lucky);
-
-2002/01/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* http.pm, install2.pm, steps.pm, install_any.pm: added update
-	installation support to install (big modifs need testing).
-
-	* pkgs.pm: allow to use same identifier for security medium (1u).
-	re-install urpmi.
-	allow some error to be catched.
-	added update installation support to install (big modifs need testing).
-
-	* crypto.pm: removed test code.
-	allow to use same identifier for security medium (1u).
-	re-install urpmi.
-	allow some error to be catched.
-	added update installation support to install (big modifs need testing).
-
-	* install_steps_interactive.pm: removed obsoleted comment.
-	allow to use same identifier for security medium (1u).
-	re-install urpmi.
-	allow some error to be catched.
-	added update installation support to install (big modifs need testing).
-
-	* install_steps_gtk.pm: fixed empty flat package selection when giving a
-	limit to medium.
-	added update installation support to install (big modifs need testing).
-
-	* install_steps.pm: allow to use same identifier for security medium (1u).
-	re-install urpmi.
-	allow some error to be catched.
-	fix for auto updates.
-	added update installation support to install (big modifs need testing).
-
-2002/01/04  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm: enable easy patch-adding of pcitable and usbtable
-	entries
-
-2002/01/03  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakbackup: user can be equal to 500
-
-2002/01/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: updated code to create synthesis file (including
-	provides on files).
-
-2002/01/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ar.po: updated Arabic file
-
-2002/01/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm, Xconfig.pm: save the output of ddcxinfos before
-	modprobe'ing i810fb, and use that output for Xconfig (when i810fb is
-	modprobe'd, ddc probe doesn't work anymore)
-
-	* install_steps_interactive.pm, install_steps_gtk.pm: fix english messages
-
-	* share/rpmsrate: as asked by Vincent Danen, lower uucp and raise sudo
-
-	* pkgs.pm: prefer gcc-cpp
-
-	* interactive_gtk.pm, interactive.pm: toggle Advanced/Basic button
-
-	* any.pm: fix english messages
-	save the output of ddcxinfos before modprobe'ing i810fb, and use that
-	output for Xconfig (when i810fb is modprobe'd, ddc probe doesn't work
-	anymore)
-
-2002/01/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: changed @euro locales to plain names; now old currencies ones
-	are obsolete
-
-2001/12/31  sdupont
-
-	* standalone/drakfont: new fixed size and add a head pixmap (to update).
-
-	* standalone/drakbackup: lots of update ...
-	  - cron work.
-	 - backup incremental & normal work.
-	 - corrupted backup data files supported.
-	 - error messages updated.
-	 - aff list of backup data files pbs.
-	 - test all backup files before to restore it.
-
-2001/12/30  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: format home directories with "-m 0" for ext2&ext3, so that the
-	root reserved part is 0% (and not 5%)
-
-2001/12/30  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: format home directories with "-m 0" for ext2&ext3, so that the
-	root reserved part is 0% (and not 5%)
-
-2001/12/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectMouse): when selecting a usb mouse,
-	call setup_thiskind with
-	at_least_one=1 (so that pci_class probe is used and so unknown
-	serial_usb
-	recognised (cf ldetect))
-
-	* modules.pm (load_thiskind): allow $probe_type to be given, allowing
-	forced pci probe (unsafe)
-
-	* any.pm (setup_thiskind_backend): when at_least_one==1, try load_thiskind
-	forcing
-	pci_class probe when no modules is found.
-
-2001/12/28  sdupont
-
-	* standalone/drakbackup: update select data on backup cd
-
-2001/12/27  sdupont
-
-	* standalone/drakbackup: fix of user selection during restore step.
-			remove return_file_date.
-			change algo for incremental backup.
-
-2001/12/26  sdupont
-
-	* standalone/drakbackup: some gi corrections & update.
-	 incremental restore.
-
-2001/12/22  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: s/use pkgs/require pkgs/ since pkgs::versionCompare is
-	only used during install
-
-	* my_gtk.pm: export gtkcolor (used in install_steps_gtk)
-	make perl_checker happy
-
-2001/12/22  sdupont
-
-	* pixmaps/backup_bot.png, pixmaps/cdrom.png, pixmaps/backup_time.png,
-	pixmaps/backup_bot2.png, pixmaps/backup_left.png, pixmaps/net.png,
-	pixmaps/backup_hd.png, pixmaps/backup_title.png,
-	pixmaps/backup_left2.png, pixmaps/filedialog.png, pixmaps/hd.png,
-	pixmaps/backup_options.png, pixmaps/backup_net.png: remove old
-	drakbackup pixmaps files.
-
-	* pixmaps/ic82-back-up-16.png, pixmaps/ic82-discdurwhat-40.png,
-	pixmaps/ic82-tape-40.png, pixmaps/ic82-moreoption-40.png,
-	pixmaps/ic82-where-40.png, pixmaps/ic82-system-40.png,
-	pixmaps/ic82-others-40.png, pixmaps/ic82-systemeplus-40.png,
-	pixmaps/ic82-network-40.png, pixmaps/ic82-CD-40.png,
-	pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png,
-	pixmaps/ic82-users-40.png, pixmaps/ic82-dossier-32.png,
-	pixmaps/ic82-back-up-48.png: drakbackup designer icons.
-
-	* standalone/drakbackup: add pixmaps on backup step.
-	new designer pixmaps on drakbackup.
-
-2001/12/21  sdupont
-
-	* standalone/drakbackup: some update in file name parsing...
-	etc ...
-
-	* pixmaps/BDO-drakebackup1.png: drakbackup
-
-2001/12/20  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: API changed, so call changed
-
-	* share/logo-mandrake.png: new ayo logo
-
-2001/12/20  sdupont
-
-	* standalone/drakbackup: update the todo header
-	the REQUIRE header
-	& code cleaning
-	  - tar -cvf tarfilename --after-date="sept 1, 2000" /home
-	   l.380 incremental: date -> if already exist do find -m ... | tar ...
-	   non incremental: date + delete old before the backup
-	  - correct detection of backups during restore.
-	  - gi for other media during restore. hd-> ok
-	  - backend for build backup update and support
-	  incremental backups.
-	  - real incremental backup
-	update resore & help.
-
-2001/12/19  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: update graphical backend
-
-2001/12/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: add dl2k.o (nic module) per request of nplanel
-
-2001/12/19  sdupont
-
-	* standalone/drakbackup: 
-	  - gi for other media during restore. hd-> ok
-	  - backend for build backup update and support
-	incremental backups.
-	  - real incremental backup
-	add other media source during restore.
-	  - update help & license.
-	  - code cleaning.
-	  - ask during whqt sys step if user want to backup critical
-	  files, like /etc/passwd /etc/group /etc/fstab
-	  - use preserve permissions during tar
-	  - begin of total backup step.( all partitions wanted, windows
-	partitions for example!)
-	  - remove replace mode (backup_*_version is enought)
-
-2001/12/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: fixed dam's sucking (syntax error only, code is
-	untested).
-
-2001/12/18  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix typos
-
-2001/12/18  sdupont
-
-	* standalone/drakfont: include new pixmap on main menu.
-
-	* standalone/drakbackup: sort lists in all lists selection.
-			correct use of incremental backup
-			parse of restore & system state.
-	fix restore user selection problems
-	fix build backup data selection problems
-	ect ...
-	drakbackup -> drakxtools.rpm
-
-	* pixmaps/ic-drakfont-48.png: drakfont pixmap...
-
-2001/12/18  yduret
-
-	* standalone/logdrake: fix console mode : exit now
-
-2001/12/18  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix typos
-
-2001/12/17  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: power graphical backend update : text is now
-	centered
-
-	* my_gtk.pm: power graphical backend update : text is now centered
-	updated new graphical backend
-
-2001/12/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_gtk.pm, standalone/drakgw: drakgw for gold
-
-	* tools/pcmcia_config.patch: remove permanently (using
-	patch_pcmcia_config.pl now)
-
-2001/12/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using
-	tmpfs
-
-2001/12/17  sdupont
-
-	* standalone/drakbackup:
-	________________________________________________________________
-	DONE:
-	incremental backups have depends whith replace options.
-	     gtklist not maximized.
-	     restore mode.
-	     view date during restore
-	     view size of file, date & hours during backup on CD
-	________________________________________________________________
-
-2001/12/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using
-	tmpfs
-
-2001/12/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: new picture for 8.2.
-
-2001/12/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: change again way of selection
-	PCI entries :
-	what's in mar files --> what's given by modules (e.g. just
-	as update_kernel does)
-
-2001/12/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install2.pm: use "askdisplay" to ask a question at begining of install
-	for what
-	display you want to use during install
-
-	* Makefile, tools/patch_pcmcia_config.pl: externalize patch_pcmcia_config
-	(from make_boot_img)
-	because we need it in perl-install/Makefile also
-
-	* mdk-stage1/rescue-gui.c, rescue/make_rescue_img, rescue/rescue-doc,
-	rescue/Makefile: have a bunch of Rescue documentation directly
-	available from the Rescue-menu following suggestions
-	by Denis among others
-
-2001/12/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: enable easy screenshot'ing
-	  - ensure /usr is formatted if / is
-	  - remove /var/lib/rpm if /var is kept
-
-	* common.pm, docs/README: enable easy screenshot'ing
-
-2001/12/12  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* rescue/make_rescue_img: larger rescue image on PPC to accomodate huge
-	xfs module
-
-	* bootloader.pm: mods to address new yaboot's lack of symlink ability, xfs
-	initrd load
-
-2001/12/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/stage1.h: support
-	"filename" in DHCP answers and give this
-	to stage2 as --kickstart parameter
-
-2001/12/11  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm, keyboard.pm: finish journalled fs usage - PPC,
-	add "\n" keyboard.pm, new modelines
-
-2001/12/10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: added network package not present in @needToCopy
-	(package that may be installed
-	by DrakX to avoid re-asking of CD1).
-
-	* bootloader.pm: added safe guard against looping symlink.
-
-2001/12/10  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, any.pm, bootloader.pm: 
-	  - fix bootloader::add_append
-	  - add handling of serial console
-
-	* http.pm, install_any.pm: enable http:// in auto_install file location
-
-2001/12/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: no need to give kernelVersion to bootloader::suggest
-
-	* install_any.pm (kernelVersion): looks at /boot/vmlinuz
-
-	* bootloader.pm (suggest, add_kernel): much cleanup
-
-	* diskdrake.pm: fix call to fileshare_config
-
-2001/12/05  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: updateed logo
-
-2001/12/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile, mdk-stage1/pcmcia_/cardmgr.c: 
-	  - fix problems with sockets not initialized (disabling
-	hotplug support -> cardmgr handles sockets)
-	  - fix problems with PCMCIA net adapters now using PCI
-	  modules, by adding PCMCIA base code in `network.img'
-
-2001/12/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: no need to give kernelVersion to bootloader::suggest
-
-	* pkgs.pm (selectPackage): hard coded preference to simple kernel
-
-	* install_any.pm (kernelVersion): looks at /boot/vmlinuz
-
-	* diskdrake.pm: fix call to fileshare_config
-
-	* steps.pm: createBootdisk now after setupBootloader (together with dumber
-	install_any::kernelVersion)
-
-	* network/tools.pm: fix missing ";" (thanks to Robert Fox)
-
-	* bootloader.pm (suggest, add_kernel): much cleanup
-
-	* fs.pm: fix type "smb" vs "smbfs", and handle options in fs::mount
-
-2001/12/05  sdupont
-
-	* pixmaps/backup_bot2.png: update pixmaps
-
-	* standalone/drakbackup: todo : scp ssl sftp rsync connections perl || c ?
-	done : bzip2 backup
-	merge
-
-2001/12/04  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakbackup: corrected pixmap path
-	corrected pixmap path
-
-	* Makefile.config: added drakbackup drakfont
-
-2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* any.pm, mdk-stage1/log.c, docs/README: save stage1.log and have it in
-	report.bug
-
-	* mdk-stage1/automatic.c, mdk-stage1/doc/TECH-INFOS: support shorter
-	versions of automatic keywords to beat problems with very long kernel
-	commandlines
-
-	* install_interactive.pm: try to not get something poorly wrapped
-
-	* c/stuff.xs.pm: floppy_info: add missing close(fd)
-
-2001/12/04  Pixel  <pixel@mandrakesoft.com>
-
-	* network/smb.pm: cleaner smbclient call
-
-	* install_steps.pm: re-enable supermount by default
-
-2001/12/04  sdupont
-
-	* pixmaps/backup_bot.png, pixmaps/backup_left.png: correct colors
-	problems.
-
-	* standalone/drakbackup: bzip2 ok for compression to see: decomp without
-	pbs whith tar.gz and tar.bz2
-	todo: update mode -> decomp + update tar file + recomp
-
-2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_interactive.pm: try to not get something poorly wrapped
-
-2001/12/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: re-enable supermount by default
-
-	* network/smb.pm: cleaner smbclient call
-
-2001/12/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fix bad parsing of package to copy (when one doen't
-	exist anymore) in
-	postinstall_rpms directory.
-
-2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_interactive.pm: try to not get something poorly wrapped
-
-2001/12/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: re-enable supermount by default
-
-	* network/smb.pm: cleaner smbclient call
-
-2001/12/04  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: additional package for wlan
-
-	* network/tools.pm: corrected pipe reading
-
-2001/12/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: make sure lilo is installed on automatic mode.
-
-	* install_any.pm: fix bad parsing of package to copy (when one doen't
-	exist anymore) in
-	postinstall_rpms directory.
-
-2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_interactive.pm: try to not get something poorly wrapped
-
-	* mdk-stage1/modules.c: fpons is a sucking chief
-
-	* modules.pm, mdk-stage1/usb-resource/update-usb-ids.pl,
-	mdk-stage1/Makefile, mdk-stage1/.cvsignore, mdk-stage1/probing.c:
-	support install from USB CDROMS (using usb-storage)
-
-2001/12/04  Pixel  <pixel@mandrakesoft.com>
-
-	* network/smb.pm: cleaner smbclient call
-
-2001/12/04  sdupont
-
-	* standalone/drakbackup: last update... for cooker
-	drakbackup deamon -> ok
-	drakbackup cvs -> to do (only for /etc)
-	drakbackup wizard -> only last step
-	drakbackup cd -> device detection and ask for only iso file.
-	drakbackup net -> do rsync
-	drakbackup begin -> todo : update initial message
-	update help and about.
-
-2001/12/04  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: additional package for wlan
-
-2001/12/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: make sure lilo is installed on automatic mode.
-
-	* mdk-stage1/modules.c: fixed g�g� sucking.
-
-2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: fpons is a sucking chief
-
-2001/12/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: fixed g�g� sucking.
-
-2001/12/04  sdupont
-
-	* standalone/drakbackup: update...
-
-2001/12/03  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: removed use gtk
-
-2001/12/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/updatehdlist: initial revision, simple way to update a local set
-	of medium from /RPMS.
-
-2001/12/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: typo of last commit (unused variable -> could not
-	compile)
-
-2001/12/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/hu.po, share/po/es.po: updated Hungarian
-	and Spanish files
-
-2001/12/03  sdupont
-
-	* standalone/drakbackup: update
-	option step.
-	write other file content.
-	restore gi.
-
-2001/12/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2001/12/01  sdupont
-
-	* standalone/drakbackup: do not include browser cache.
-
-2001/11/30  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* docs/spec-DrakX-8.0.html: added spec (forgotten for quite a long)
-
-2001/11/30  gbeauchesne
-
-	* partition_table_gpt.pm: 
-	  - cleanups from mainline
-
-	* modules.pm: Suckiness fixes from mainline (gc):
-	  - Do parse /proc/modules in reverse order
-	  - Fix "convert old scsi_hostadapter's to new probeall" scheme
-
-	* bootloader.pm: 
-	  - Don't forget to link the initrd to the real image in /boot/efi/ too
-	  - Remove DEBUG printouts in install_efi_boot_menu
-
-2001/11/30  Pixel  <pixel@mandrakesoft.com>
-
-	* network/smb.pm, any.pm, Makefile.drakxtools, standalone/diskdrake,
-	Makefile.config, diskdrake.pm: fileshare should be ok, handle diskdrake
-	--fileshare, fix smb import
-
-2001/11/30  sdupont
-
-	* pixmaps/backup_left2.png: drakbackup pixmap
-
-	* standalone/drakbackup: backend mode-> ok for hd
-	we can use drakbackup !.
-	todo :
-		backend mode:
-			- net
-			- cd
-	
-		advanced mode:
-			- device detection (cd writer)
-	
-		wizard:
-			- end of this step.
-	
-		gi:
-			- option step in adnanced step to choice
-			for example tar.gz or tar.gz2 ...
-	update
-	restore step 1 & 2.
-	adv step -> ok
-	todo: wizard ...
-	little update!
-	
-	variables correction in advanced step.
-	wizard user question, sys question & daemon
-
-2001/11/29  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* share/rpmsrate: Remove linux_logo
-
-2001/11/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: add wvlan_cs
-
-	* mdk-stage1/modules.c: remove unneeded handling of "alias
-	scsi_hostadapter"
-
-	* mdk-stage1/stage1.c: add another expert_third_party_modules at the end
-	of enabling-pcmcia-stuff
-
-2001/11/29  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: remove the export tree for nfs/smb feature, remove some
-	test code
-	tentative version with export/import nfs/smb tree (committed to have it
-	in CVS as the export tree is already deprecated)
-
-	* standalone/fileshareset: 
-	  - allow root to export everything
-	  - remove empty mntpoint (from smb)
-
-2001/11/29  sdupont
-
-	* standalone/drakbackup: just update....
-	advanced: users correction during save.
-	user pass, user login, path to save local or on host
-	          combo for network protocol.
-	wizrad:   already to do!
-	CDRW burn:     todo: devices detection (see to_fond_cd).
-	code cleaning.
-
-	* standalone/drakfont: cleanning code.
-
-2001/11/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: 
-	  - fix pixel sucks of not parsing /proc/modules in
-	reverse order
-	  - be more in sync regarding names of pcmcia drivers
-
-	* any.pm: add modules.conf in report.bug
-
-2001/11/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/zh_TW.po: updated Chinese file
-
-2001/11/28  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (read_conf): fix "convert old scsi_hostadapter's to new
-	probeall"
-
-	* standalone/drakbackup: make check_what_user works
-
-	* standalone/fileshareset: better description
-	gr_mem in getgrent is space separated, not comma separated
-	add samba handling. Should be finished now :)
-
-2001/11/28  sdupont
-
-	* pixmaps/backup_bot2.png, pixmaps/quit.png: drakbackup pixmaps.
-
-	* standalone/drakbackup: no important changement!
-	clean code
-	update!
-	for gc & Warly: some fixes, correction of advanced, wizard and after
-	advanced steps.
-	the user have a better gestion during advanced step, the protocols ftp,
-	sftp, scp, rsync
-	are now include in advanced step..... etc ;-)
-	todo: when checkbuttonbox are clicked for user choice set it to 0 or 1
-	juste after.
-	clean code.
-	new after advanced step, correction of checkbuttons problems & new
-	pixmaps.
-
-2001/11/27  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: updated, cooker style
-
-2001/11/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: avoid problem of array reference badly evaluated.
-
-2001/11/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/mailchangelog.pl: beurk
-	changelog is at linux-mandrake not mandrakesoft
-
-	* install_steps.pm: i810 -> no FB at boot
-
-2001/11/27  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_gpt.pm (generate_guid): cleanup
-
-	* any.pm (setupBootloader): s/last/return/
-
-2001/11/27  sdupont
-
-	* standalone/drakbackup: advanced step...
-	update.
-	advanced mode ... and ...
-	read and use user list correctly, advanced step user list.
-
-	* pixmaps/hd.png, pixmaps/net.png, pixmaps/cdrom.png: pixmaps for
-	drakbackup.
-
-2001/11/26  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* tools/i386/netboot/stage2.rtl8139: add rtl8139 netboot file that works
-
-	* tools/i386/netboot/stage1.rtl8139: add rtl8139 netboot file that works
-	stage1/stage2 of rtl8139 didn't work
-
-2001/11/26  dam's  <damien@mandrakesoft.com>
-
-	* common.pm, my_gtk.pm: new features for new mcc
-
-2001/11/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: getAndSaveAutoInstallFloppy: don't die when output'ing
-	of
-	auto_inst.cfg is not possible
-
-2001/11/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: add $o->{excludedocs} feature
-
-	* Makefile.drakxtools: remove unneeded files (*.bs and .exists)
-
-	* interactive_gtk.pm: cleanup
-
-2001/11/26  sdupont
-
-	* standalone/drakbackup: new gi, advanced step.
-	update.
-	gawk cmds.
-	better use for read and save conf. file now on
-	/etc/draxtools/drakbackup/drakbackup.cfg
-
-	* pixmaps/backup_hd.png, pixmaps/backup_options.png,
-	pixmaps/backup_net.png, pixmaps/backup_time.png: png files for
-	DrakBackup.
-
-2001/11/25  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/fileshareset: first version. for the moment, only nfs.
-
-2001/11/25  sdupont
-
-	* standalone/drakbackup: update of read_conf_file and default mode.
-
-2001/11/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po, share/po/es.po: updated Spanish and Danish files
-
-2001/11/24  sdupont
-
-	* standalone/drakfont: about...
-
-	* standalone/drakbackup: update
-	update gi ,build of system, user, other, options interfaces.
-	advanced step.
-
-2001/11/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: package for pcmcia is now called "pcmcia-cs"
-
-	* any.pm, detect_devices.pm: pcmcia: /var/run/stab is nor
-	/var/lib/pcmcia/stab
-	yes it probably doesn't bring anything valuable but it's
-	how life is :-)
-
-2001/11/23  sdupont
-
-	* standalone/drakbackup: radio buttons & information message.
-	change gi interface, include help, about and pixmaps (backup_*.png on
-	standalone/pixmaps directory)
-
-2001/11/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: removed loading of agpgart module for i810 card.
-
-2001/11/22  sdupont
-
-	* standalone/drakfont: about button & GPL license.
-
-	* standalone/drakbackup: update gi.
-	TODO: separate all the boxes.
-	include wizard and advanced in pixmaps.
-	update
-	notebook gi.
-
-2001/11/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2,
-	mdk-stage1/init-data/msgboot-blank.img.bz2,
-	mdk-stage1/init-data/msgboot.img.bz2: fixed typo in help.msg
-
-	* Xconfigurator.pm: hack for SiS 640 for laptop.
-
-	* install_any.pm: fixed install_urpmi to build a correct urpmi db.
-
-2001/11/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: i810fb
-	migrate pcmcia in drakx to use in-kernel version (only
-	for 2.4, though --> pcmcia in 2.2 no longer supported)
-
-	* install_steps_interactive.pm, Makefile, c/Makefile.PL: migrate pcmcia in
-	drakx to use in-kernel version (only
-	for 2.4, though --> pcmcia in 2.2 no longer supported)
-
-	* install2.pm: i810fb
-
-	* mdk-stage1/stage1.c, mdk-stage1/pcmcia_/lex_config.c,
-	mdk-stage1/pcmcia_/cardmgr.c, mdk-stage1/pcmcia_/yacc_config.c,
-	mdk-stage1/pcmcia_/Makefile, mdk-stage1/Makefile,
-	mdk-stage1/pcmcia_/pcmcia.h, mdk-stage1/pcmcia_/ds.h,
-	mdk-stage1/pcmcia_/probe.c: migrate to pcmcia support from kernel,
-	patching untouched imported
-	sources from pcmcia-cs-3.1.29, to ease further updates of vendor
-	code (start from a clean pcmcia_ subdir)
-
-2001/11/21  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm (suggestions_mntpoint): if there's no server suggestion, use
-	the simple
-	one, so that 'simple' is the only one required when someone modifies
-	%fsedit::suggestions
-
-2001/11/20  gbeauchesne
-
-	* partition_table.pm: 
-	  - Add isEfi() to isOtherAvailableFS() test so that install doesn't
-	suggest
-	to format /boot/efi by default. That way, we could preserve (shame on
-	us)
-	  EFI boot partition generated by Windows XP 64 bits...
-
-2001/11/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pcmcia_/lex_config.c, mdk-stage1/pcmcia_/cardmgr.c,
-	mdk-stage1/pcmcia_/bulkmem.h, mdk-stage1/pcmcia_/cardmgr.h,
-	mdk-stage1/pcmcia_/vg468.h, mdk-stage1/pcmcia_/driver_ops.h,
-	mdk-stage1/pcmcia_/i82365.h, mdk-stage1/pcmcia_/cirrus.h,
-	mdk-stage1/pcmcia_/version.h, mdk-stage1/pcmcia_/cistpl.h,
-	mdk-stage1/pcmcia_/yacc_config.c, mdk-stage1/pcmcia_/cs_types.h,
-	mdk-stage1/pcmcia_/cs.h, mdk-stage1/pcmcia_/yacc_config.h,
-	mdk-stage1/pcmcia_/ds.h, mdk-stage1/pcmcia_/tcic.h,
-	mdk-stage1/pcmcia_/probe.c: Initial revision
-	version 3.1.29
-
-2001/11/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_stdio.pm: for po i can't use $ for string interpolation
-
-2001/11/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* services.pm, standalone/scannerdrake: Corrected English errors
-
-	* share/po/hu.po, share/po/cs.po: updated pot file
-	updated Czech and Hungarian files
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/af.po:
-	updated pot file
-
-2001/11/19  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (setupBootloader): fix typo
-	(setupBootloader): fix typo
-
-2001/11/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Last correction was wrong, reverted it.
-
-2001/11/19  yduret
-
-	* standalone/scannerdrake: added dynamic support
-
-2001/11/16  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: syntax cleanup
-	  - a little cleanup
-	  - in case there is both scsi and ide hard drives, go to expert
-	questions
-	directly (it would need a semi_auto asking on which drive the bios
-	boots...)
-
-2001/11/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help file
-
-	* keyboard.pm: Added Swedish dvorak keyboard
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/help_xml2pm.pl, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/11/12  sdupont
-
-	* standalone/drakbackup: new backup tool.
-	backend_mode with options.
-	        begin interactive mode.
-
-2001/10/29  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: code correction
-
-2001/10/29  gbeauchesne
-
-	* rescue/list.ia64: 
-	  - Add xfs_repair and efibootmgr
-
-2001/10/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* fs.pm, loopback.pm, fsedit.pm, bootloader.pm: revert back to /initrd
-
-	* modules.pm: here too
-	CDCEther looks good, I add it
-
-2001/10/29  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/pcmcia_config.patch: adapt for new pcmcia-cs
-
-2001/10/29  sdupont
-
-	* standalone/drakfont: Copyright (C)
-	correction of warning & code cleaning.
-	the end.... i think...
-	updated
-	uninstall interface & progress bar
-	uninstall interface : lists & progress bar
-	new progress bar update
-	todo: second list
-
-2001/10/28  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: cleaning
-
-2001/10/27  daouda
-
-	* devices.pm, my_gtk.pm, Xconfig.pm: return value at end of module
-
-	* share/rpmsrate: 
-	  - increase icewm weight.
-
-2001/10/26  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakautoinst, standalone/drakfont: progress bar hack
-
-2001/10/26  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/pcmcia_config.patch: was duplicated in gi/tools
-
-	* partition_table_gpt.pm, partition_table_raw.pm: no adjust start and end
-	on GPT
-
-2001/10/26  sdupont
-
-	* standalone/drakfont: updated.
-	search correct progress bar mode implementation.
-	updated
-	fix some bugs & interface progress implementation.
-	TODO:
-	progress before backend.
-		search if directory already exist before custom install.
-
-2001/10/25  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakautoinst: simple variables handled, code compression.
-	The new and shiny drakautoinst is coming. P|-|34R
-	The new drakautoinst is coming. P|-|34R
-
-	* pixmaps/mdk_logo.png: additional logo
-
-	* standalone/drakfont: code correction
-
-2001/10/25  sdupont
-
-	* standalone/drakfont: merge differents versions.
-	file sector, list of fonts for advanced install...
-	applications choice, license widget, help widget.
-
-2001/10/24  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: updated
-	updated
-	updated, lot of bugs.
-	updated
-
-	* my_gtk.pm: added set_editable
-
-2001/10/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/lsparts, mdk-stage1/rescue-gui.c, mdk-stage1/frontend.h,
-	mdk-stage1/.cvsignore, rescue/install_bootloader,
-	rescue/tree/etc/rc.sysinit, rescue/Makefile,
-	mdk-stage1/stdio-frontend.c, rescue/guessmounts, mdk-stage1/Makefile,
-	rescue/tree/etc/issue, rescue/make_rescue_img,
-	mdk-stage1/newt-frontend.c: 
-	  - add a GUI to the rescue
-	  - provide guessmounts with better efficiency and output, go to
-	console, and reboot
-	  - provide install_bootloader which runs lilo from /mnt if it seems
-	safe
-	  - add lsparts to rescue, which prints partitions with detected types
-
-2001/10/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm: replace /initrd with /lib/initrd
-	(hds): in case of GPT, allow ext2 to be replaced by any kind of
-	partitions (esp. EFI)
-
-	* partition_table.pm, partition_table_gpt.pm, partition_table_bsd.pm,
-	partition_table_raw.pm: add methods first_usable_sector and
-	last_usable_sector
-
-	* fs.pm, loopback.pm, bootloader.pm: replace /initrd with /lib/initrd
-
-2001/10/24  sdupont
-
-	* standalone/drakfont: scroll
-	`
-	import_status & progress.
-	gi update.
-
-2001/10/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* services.pm: tagged as translatable some left out strigns
-
-2001/10/23  sdupont
-
-	* standalone/drakfont: gi update
-	doc and progress bar.
-	gui: install from directory
-	gui supported.
-
-2001/10/23  yduret
-
-	* share/po/fr.po: fixed fohtes grammar
-
-2001/10/22  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: speedtouch config : added usa vpi vci
-
-2001/10/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: oops forgot to umount after "updatemodules"...
-
-2001/10/22  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/tree/etc/profile: fix PATH (have /mnt/bin /mnt/usr/bin ...)
-
-2001/10/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed connection device setting for "oki4w" driver.
-
-2001/10/19  gbeauchesne
-
-	* partition_table_gpt.pm: 
-	  - Use /dev/random through devices::make() instead of /dev/urandom
-	  - Localize file descriptor
-	  - Capitalize error message if no /dev/random found
-
-	* partition_table.pm: 
-	  - s/Win98 FAT32/FAT32/
-	  - s/Partition that contains an EFI file system/EFI (FAT-12/16/32)/
-	  - Add "FAT32" to @important_types for IA-64 & /boot/efi
-
-2001/10/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c: small fix
-
-2001/10/19  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm: OOize can_raw_add
-
-	* partition_table.pm: handle empty $hd->{primary}{raw} (happens with no
-	partitions on ia64)
-	  - raw_add, can_raw_add moved to partition_table_raw
-	  - using raw_removed
-
-	* partition_table_dos.pm: better handling of CHS overflow (mainly for non
-	cylinder-boundary aligned part (like ia64))
-
-	* partition_table_raw.pm (adjustEnd): in case the end is totalsectors,
-	don't adjust since totalsectors / cylinder_size may not be an integer
-	(zero_MBR): defaults to GPT on ia64
-	(raw_add, can_raw_add, raw_removed): created, can now be overloaded in
-	partition_table_*.pm's
-	(get_geometry): keep the total_sectors as given by c::total_sectors,
-	don't try to recompute it based on nb_cylinders (for hds where
-	total_sectors is not a multiple of nb_cylinders)
-
-	* common.pm: cleanup
-
-	* partition_table_gpt.pm: fix ending is last sector, not next one
-	add TODO for partition entry guid
-	  - writing partition table now works
-	  - creating a new partition table now works (except GUIDs generation)
-
-2001/10/18  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: corrected GET_FL and co
-
-2001/10/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* standalone/XFdrake: fix ia64 glitches with /usr/X11R6/lib/X11/Cards (now
-	use rgb.txt instead).
-
-2001/10/18  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_gpt.pm: 
-	  - add checksum verif on partition entries
-	  - detect the type of partition since the partition table types seem
-	quite poor
-	read part of GPT partition table working
-
-	* fsedit.pm: 
-	  - add checksum verif on partition entries
-	  - detect the type of partition since the partition table types seem
-	quite poor
-
-	* partition_table.pm: read part of GPT partition table working
-	shorter GPT name
-
-	* detect_devices.pm: safer modprobe ide-floppy
-
-2001/10/18  sdupont
-
-	* standalone/drakfont: change Fontmap ghostscript file.
-	drakfont support now .gsf fonts
-	end of backend......
-	update
-
-2001/10/17  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draksec: typo
-
-2001/10/17  sdupont
-
-	* standalone/drakfont: implementation of type1 fonts removing.
-	ghostscript, xfs and staroffice tested and supported.
-
-2001/10/16  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draksec: correct bad level display
-
-	* standalone/interactive_http/Makefile: makes rpmlint happy
-
-2001/10/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: print checks
-
-	* rescue/tree/etc/rc.sysinit: better phrasing
-
-2001/10/16  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* rescue/devices.pl, mdk-stage1/pci-resource/update-pci-ids.pl,
-	rescue/list.ppc: typo in update kernel by /me
-	fine-tune sanity_check for ppc
-	move /dev/nvram from list.ppc to devices.pl
-
-2001/10/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/10/15  yduret
-
-	* scanner.pm: wonderful perl forgotten
-
-2001/10/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: have "other.img" drivers also
-	supported
-
-2001/10/12  sdupont
-
-	* standalone/drakfont: support all installations, and support xfs,
-	ghostcript, staroffice.
-	todo aplli: openoffice, gimp, abiword, netscape & other browsers...
-	todo or to see: --strong  ttmkfdir -c ???
-	emd of backend..
-
-2001/10/11  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: multiple card configuration bug corrected.
-	allelluia.
-
-	* network/tools.pm: aded use c
-
-	* standalone/drakfont: code review
-
-2001/10/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_stdio.pm, install_steps_stdio.pm: stdio mode works again
-
-2001/10/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: ensure postInstallNonRooted is done *before* ejecting cdrom
-
-2001/10/11  sdupont
-
-	* docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf,
-	docs/drakfont/drakfont.dvi: clean directory..
-
-	* docs/drakfont/drakfont.aux, docs/drakfont/dia_srcs/drakfont.dia,
-	docs/drakfont/dia_srcs/drakfont_uninstall.dia,
-	docs/drakfont/dia_srcs/drakfont_install.dia: delete all bads files...
-
-	* standalone/drakfont: improved....
-	improved && implement remove fonts for xfs
-	improved
-	improved
-	optimisation
-	correction of option install --replace
-	dialog of install options
-	correction of install option.
-
-	* docs/drakfont/drakfont.jpg, docs/drakfont/drakfont_install.jpg,
-	docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: jpg &
-	ps with -kb option
-	clean...2
-
-2001/10/10  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: typo
-	improved options handling
-
-	* standalone/net_monitor: ergo and features improvments, pipe handling
-	correction
-
-	* network/tools.pm: updated
-
-2001/10/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/locales-skeleton.tar.bz2: enabled Maltese language
-
-2001/10/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: normalize the default type entry ("entry")
-
-	* interactive_gtk.pm: fix typo (on clicked_may_quit)
-
-2001/10/10  sdupont
-
-	* standalone/drakfont: option replace for "install from" &
-	windows_import...
-	update install dir
-	better for --install
-	new version of drakfont. in perl langage.
-
-	* docs/drakfont/drakfont.jpg, docs/drakfont/drakfont.aux,
-	docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf,
-	docs/drakfont/drakfont.tex, docs/drakfont/Makefile,
-	docs/drakfont/drakfont_install.jpg, docs/drakfont/drakfont.dvi,
-	docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: docs
-	drakfont
-
-2001/10/10  yduret
-
-	* standalone/scannerdrake: first apparition on earth..
-
-	* Makefile.config: added scannerdrake
-
-2001/10/09  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: removed trash
-	connection test is now in background, corrects the interface freeze
-	problem
-
-	* pixmaps/net_u.png: new pixmap for draknet/net_monitor
-
-	* standalone/net_monitor, standalone/draknet: connection test is now in
-	background, corrects the interface freeze problem
-
-2001/10/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-2001/10/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: fix detecting read-only drives (like memory-sticks)
-
-	* partition_table.pm: make perl_checker happy
-
-	* partition_table_raw.pm: fix detecting read-only drives (like
-	memory-sticks)
-	make perl_checker happy
-
-	* modules.pm, detect_devices.pm, install2.pm: ensure floppies() takes care
-	of usb-storage if possible, so that patch on usb floppy works
-
-2001/10/09  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm, keyboard.pm, Xconfigurator.pm: move to Linux
-	keycodes on PPC, add additional Apple modelines
-
-	* install_steps_interactive.pm: re-enable PPC bootloader setup
-
-2001/10/08  dam's  <damien@mandrakesoft.com>
-
-	* c/stuff.xs.pm: added FL_GET and FL_SET
-
-2001/10/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm: keep isp and gdth module for hd.img (as well as all.rdz) as
-	they have been
-	removed from the skip list for stage1.
-
-	* rescue/tree/etc/oem: added silly modification to avoid using more than 7
-	partition for DAC960 (/home
-	and /var are not created in the current state).
-
-2001/10/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: ia64
-
-	* mdk-stage1/Makefile: 8.1 -> cooker
-
-2001/10/08  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm, partition_table.pm: yet a few other ataraid cases
-
-2001/10/06  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* partition_table_raw.pm, partition_table.pm: updates to accomodate IBM
-	PPC systems with DOS partition table
-
-2001/10/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added (missing) creation of
-	/hd/boot/grub/device.map (needed for
-	CompactSmartArray).
-
-2001/10/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: kdegames : 2 -> 4
-
-2001/10/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fix (work around) parted problem when it refuse to
-	use all disk space for
-	partition.
-	added another psacct log file in touch.
-	fixed typo on scalar reference for psacct bug.
-	updated with 8.1 OEM ProSuite.
-
-	* tools/oem-prepare: updated with 8.1 OEM ProSuite.
-
-2001/10/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-2001/10/04  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_dos.pm: is little-endian, so use "V" instead of "I"
-
-2001/10/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: synced with oem script.
-	removed 3D games not installed by default.
-
-	* rescue/tree/etc/oem: fixed typo in produced patch.
-	added extension to pro suite CD (added kernel-enterprise to possibly
-	installable
-	and install kernel22).
-	removed 3D games not installed by default.
-	added missing xmms-arts.
-	allow halting.
-
-2001/10/03  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm: yet another ataraid support patch
-
-2001/10/02  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix previous hack.
-	added hack to do "/sbin/depmod -a" for NVIDIA driver.
-
-2001/10/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/probing.c: new pci-ids.h
-
-	* mdk-stage1/usb-resource/update-usb-ids.pl: better look
-
-	* share/po/fr.po: small fix
-
-	* standalone/drakgw: don't call pkgs_install when no package needs to be
-	installed
-
-2001/10/02  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm: bloody ataraid detection
-
-	* devices.pm: ataraid devices support
-
-2001/10/01  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate: fixed bad format for BOOKS used in DEVELOPMENT.
-
-	* rescue/tree/etc/oem: added CHARSET support, removed kernel22 and
-	kernel-enterprise from list of
-	package installable in oem mode, added possibility to set language on
-	/etc/oem
-	script invocation.
-
-	* install_steps_interactive.pm: avoid chooseCD on oem install.
-
-	* install_steps_gtk.pm: avoid asking for changing CD on oem install.
-
-	* install_any.pm: use $boot_medium for default medium in oem install,
-	avoid using kernel22 or
-	kernel-enterprise in oem install (space available is too tight on CD oem
-	version).
-
-	* tools/oem-prepare: synced with oem script.
-
-2001/10/01  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: reword it so that it reflects
-	what's in the marfiles
-
-2001/10/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po: updated Bulgarian file
-
-2001/09/29  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* docs/README: New adress where to find the kernel BOOT
-
-2001/09/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/09/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/drvinst: don't install usb keyboard drivers more than once
-	try to fix usb keyboards
-
-2001/09/27  kjx
-
-	* share/po/zh_CN.po: translating
-
-2001/09/26  gbeauchesne
-
-	* install_any.pm: 
-	  - Suggest /boot/efi on IA-64 for the first VFAT partition found,
-	instead
-	of /mnt/windows
-
-	* bootloader.pm: 
-	  - bootloader.pm (suggest): don't search for dos (or windows) boot
-	partition
-	on IA-64 since ELILO can only boot Linux.
-	  - bootloader.pm (write_lilo_conf): don't cry if we don't have
-	/boot/boot.b
-	  or boot/message on IA-64.
-
-	* rescue/list.ia64: 
-	  - Add file list for "rescue" disk
-
-	* share/list.ia64, partition_table.pm: 
-	  - partition_table.pm: Add XFS suggestion for IA-64
-	  - share/list.ia64: misc updates and additions wrt. XFS, ReiserFS
-
-2001/09/25  baudens
-
-	* share/po/fr.po: s/Linux Mandrake/Mandrake Linux/
-	Remove totally crazy translation.
-	Translators, please use your brain!
-
-2001/09/25  gbeauchesne
-
-	* partition_table.pm: 
-	  - Add ReiserFS and Ext3fs entries for IA-64
-
-2001/09/25  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (naughtyServers): cleanup comments
-
-2001/09/25  warly
-
-	* share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is
-	installed for newbie and drakfirsttime does not fail.
-	put gtk-themes to 4 so that it is installed for newbie and drakfirsttime
-	does not fail.
-
-2001/09/25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: allow non ejectable medium to allow all
-	hdlists on the bootable medium.
-	make current boot medium already selected if multiple hdlist are on this
-	boot medium.
-
-2001/09/25  warly
-
-	* share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is
-	installed for newbie and drakfirsttime does not fail.
-	put gtk-themes to 4 so that it is installed for newbie and drakfirsttime
-	does not fail.
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* share/po/fr.po: corrected translation
-
-2001/09/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/mount.c, mdk-stage1/mount.h,
-	mdk-stage1/disk.c: hd.img now detects partition types... backport from
-	DrakX :-)
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount_part): fix for iso loopback mounted
-
-	* share/po/fr.po: fix
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/isdn.pm: type assignation bug fix
-	corrected type assignation
-
-	* share/po/fr.po: corrected bad translation
-
-	* standalone/draknet: corrected type assignation
-
-2001/09/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* bootloader.pm: fix add_append (there was a ) at the end of the parameter
-	value)
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
-	and Turkish files
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount_part): fix for iso loopback mounted
-
-	* share/po/fr.po: fix
-
-2001/09/24  warly
-
-	* share/rpmsrate: lower arkeia
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: corrected isdn firmware
-
-	* network/adsl.pm, network/isdn.pm: type assignation bug fix
-	corrected type assignation
-
-	* share/po/fr.po: corrected bad translation
-
-	* standalone/draknet: corrected type assignation
-
-2001/09/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* bootloader.pm: fix add_append (there was a ) at the end of the parameter
-	value)
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
-	and Turkish files
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix small error merging existing fstab
-
-	* share/po/fr.po: fix
-
-	* diskdrake.pm: do not propose to mount/umount removable medias (disabled
-	for now)
-
-	* diskdrake_interactive.pm: hide the supermount checkbox in standalone
-
-2001/09/24  warly
-
-	* share/rpmsrate: lower arkeia
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm, network/ethernet.pm: bug fix
-
-	* modules.pm: corrected isdn firmware
-
-	* network/isdn.pm, network/adsl.pm: type assignation bug fix
-	corrected type assignation
-
-	* standalone/draknet: corrected type assignation
-
-	* install_any.pm, rescue/tree/etc/oem: added isdn-light to be copied on hd
-	during install
-
-2001/09/24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many
-	problems reported with it.
-
-	* share/rpmsrate: allow rpm build for non expert who choose development.
-
-	* install_steps.pm: disable wins in /etc/nsswitch.conf (after installed
-	packages).
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
-	and Turkish files
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix small error merging existing fstab
-	add "iocharset=" for cdrom
-
-	* install_steps.pm: 
-	  - disable supermount by default
-	  - cleanup nsswitch.conf wins removing
-
-	* diskdrake.pm: do not propose to mount/umount removable medias (disabled
-	for now)
-
-	* diskdrake_interactive.pm: hide the supermount checkbox in standalone
-
-2001/09/24  siegel
-
-	* share/po/de.po: new german version
-
-2001/09/24  warly
-
-	* share/rpmsrate: lower arkeia
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm, network/ethernet.pm: bug fix
-
-2001/09/24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many
-	problems reported with it.
-
-	* share/rpmsrate: allow rpm build for non expert who choose development.
-	removed any reference to XFree86-glide-module or Glide_XXX packages.
-
-	* pkgs.pm: sort mediums by number, in allMediums() else they will be in
-	hash keys orders in
-	install_steps_interactive::chooseCD().
-
-	* install_steps.pm: disable wins in /etc/nsswitch.conf (after installed
-	packages).
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: add "iocharset=" for cdrom
-
-	* install_steps.pm: 
-	  - disable supermount by default
-	  - cleanup nsswitch.conf wins removing
-
-2001/09/24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate: removed any reference to XFree86-glide-module or
-	Glide_XXX packages.
-
-	* pkgs.pm: sort mediums by number, in allMediums() else they will be in
-	hash keys orders in
-	install_steps_interactive::chooseCD().
-
-2001/09/24  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: File permission settings during install were not done.
-	Fixed.
-
-2001/09/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: misc typo correction
-
-	* install_steps.pm: voodoo cards don't like performing 3d accel in fb mode
-
-2001/09/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: add "Graphical Environment" in meta_class server
-
-	* share/rpmsrate: simplify (for the moment)
-	do not force X flag, have it selected for any "Graphical Environment"
-
-	* share/compssUsers, install_any.pm: do not force X flag, have it selected
-	for any "Graphical Environment"
-
-2001/09/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps.pm: voodoo cards don't like performing 3d accel in fb mode
-
-2001/09/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po, share/po/hu.po: updated Czech and Hungarian file
-
-	* share/po/zh_TW.po: updated Chinese file
-
-2001/09/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: add "Graphical Environment" in meta_class server
-
-	* fsedit.pm: add magic SWAPSPACE2
-
-	* bootloader.pm: allow bootloader on fat partitions
-
-	* share/compssUsers, share/rpmsrate, install_any.pm: do not force X flag,
-	have it selected for any "Graphical Environment"
-
-2001/09/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: version is 8.1
-
-2001/09/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bs.po: updated Bosnian file
-
-2001/09/22  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, install2.pm: 
-	  - cleanup noatime option setting
-	  - cleanup exec option setting (must noexec => 0 instead of exec => 1)
-
-	* bootloader.pm (suggest): fix kernel 2.2 secure adding in menu
-
-2001/09/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po: updated Bulgarian file
-
-2001/09/22  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (suggest): fix kernel 2.2 secure adding in menu
-
-2001/09/22  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added support for automatic /dev/... file permissions
-	setting by devfsd.
-	Improved matching of auto-detection results with database entries.
-	Given hint to the user to select the correct model when matching fails.
-
-	* printer.pm: Added support for automatic /dev/... file permissions
-	setting by devfsd.
-
-2001/09/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm: avoid detecting plip for live upgrade.
-
-2001/09/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: use "us" XKB file for Korean keyboard, otherwise some
-	functionality is lost
-	small fix for "vn" keyboard (enable toggle key)
-
-	* share/po/ko.po: updated Korean file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* printerdrake.pm: small fix
-
-2001/09/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: When one changes the driver of a freshly
-	added printer, the cursor was not pointed to the old driver, fixed.
-	Fixed paper size not set according to chosen language during
-	installation.
-
-2001/09/21  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm: typo
-
-2001/09/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: reworked medium management.
-	moved com_license to parent package (as code that show the license is
-	now
-	available even for non gtk install).
-
-	* Xconfigurator.pm: S3 ViRGE is a bad card for testing on live upgrade.
-
-	* pkgs.pm, install_any.pm: reworked medium management.
-
-	* detect_devices.pm: avoid detecting plip for live upgrade.
-
-	* install_steps_interactive.pm: avoid keeping testing code.
-	reworked medium management.
-	added code to support changeable cdrom, set a unique copy of license for
-	installing commercial application as package variable (exported).
-
-2001/09/21  gbeauchesne
-
-	* share/po/no.po: remove trailing '\n'
-
-2001/09/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po, share/po/no.po: updated pot file
-	updated pot file
-	updated Norwegian and Hungarian files
-	updated pot file
-
-	* help.pm: updated help file
-
-	* share/po/help_xml2pm.pl: updated pot file
-
-	* printerdrake.pm: small fix
-	changed text strings to be more translator friendly
-	(NEVER EVER cut a phrase)
-
-	* share/po/zh_CN.po, share/po/ru.po, share/po/vi.po: updated pot file
-	updated pot file
-	corrected extra \n
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-	updated pot file
-	updated pot file
-
-	* keyboard.pm: adapted keyboard priority numbers (it is useless to give a
-	multichoice with a
-	value higher than 90)
-
-	* share/po/zh_TW.po: updated pot file
-	updated pot file
-
-2001/09/21  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: write password in lilo.conf even if it's also done by
-	msec, otherwise lilo will fail with restricted only
-
-	* install_steps.pm: Ensure $o->{superuser}{name} is temporary
-
-	* share/rpmsrate, install_any.pm: add HIGH_SECURITY flag, use it for
-	libsafe and kernel22-secure
-
-2001/09/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Added a forgotten "_( ... )".
-
-2001/09/21  warly
-
-	* share/rpmsrate: add gnomemeeting and openmcu
-
-2001/09/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm (partition_with_diskdrake): ensure the $::expert
-	flag modifications in
-	diskdrake do not escape from diskdrake
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): do not propose
-	check bad blocks for xfs and jfs
-
-2001/09/20  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: don't reapply the conf, if already applied.
-	usefull for dhcp, because the network should be restarted after
-	configured
-
-	* network/adsl.pm: test if microcode is there
-
-	* bootlook.pm: removed blocking die
-
-2001/09/20  fcrozat
-
-	* share/rpmsrate: Add gnome-user-docs to GNOME install
-	Install Mdk eazel engine for gnome
-
-2001/09/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: take care not probing in /dev/ for finding package to upgrade,
-	this cause
-	problem in live_upgrade.
-
-	* Xconfigurator.pm: added VideoRam for ET 6x00 card.
-
-	* network/netconnect.pm: tried to fix damien sucking.
-
-2001/09/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: misc
-
-2001/09/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-	* share/po/cs.po: updated Czech file
-
-	* share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish,
-	Chinese and Dutch files
-
-2001/09/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm (partition_with_diskdrake): ensure the $::expert
-	flag modifications in
-	diskdrake do not escape from diskdrake
-
-	* share/rpmsrate: raise i18n fonts
-
-	* fsedit.pm (hds): do a get_major_minor where needed
-
-	* lang.pm: replace xcin by chinput as per Alex request
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): do not propose
-	check bad blocks for xfs and jfs
-
-2001/09/20  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed flow of the program for the "recommended" mode of
-	the installation.
-
-2001/09/20  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: don't reapply the conf, if already applied.
-	usefull for dhcp, because the network should be restarted after
-	configured
-
-	* mouse.pm: text positionning
-
-	* standalone/net_monitor: less gethostbyname
-
-2001/09/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: take care not probing in /dev/ for finding package to upgrade,
-	this cause
-	problem in live_upgrade.
-
-	* network/netconnect.pm: tried to fix damien sucking.
-
-2001/09/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish,
-	Chinese and Dutch files
-
-2001/09/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: raise i18n fonts
-	s/telnet-server/telnet-server-krb5/
-
-	* fsedit.pm (hds): do a get_major_minor where needed
-
-	* fs.pm (add2all_hds): allow both "smbfs" and "smb" as fs type
-
-	* lang.pm: replace xcin by chinput as per Alex request
-
-	* printerdrake.pm: back out the modif from till as asked by till
-
-2001/09/20  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Make it possible to configure more than 1 printer in a
-	"recommended" mode installation.
-
-2001/09/19  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network
-	restart at better place
-
-2001/09/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: chromium and tuxracer don't work well with Riva
-
-2001/09/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: updated pot file
-	updated help xml
-
-	* help.pm: updated help file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/bg.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po,
-	share/po/sv.po, share/po/hu.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po,
-	share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/de.po:
-	updated help xml
-
-	* share/po/wa.po: updated pot file
-	updated pot file
-
-2001/09/19  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network
-	restart at better place
-
-2001/09/19  fcrozat
-
-	* share/rpmsrate: Add mdk-eazel-engine
-
-	* share/po/fr.po: Fix french mistakes
-
-2001/09/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added code to check if package are really installed.
-
-	* Xconfigurator.pm: Rage 128 doesn't like XF3 at all.
-	make only bad card Riva128 for testing XF4.
-	Riva128 is now a bad card.
-
-2001/09/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: raklet quoting
-
-	* share/rpmsrate: chromium and tuxracer don't work well with Riva
-
-2001/09/19  Pixel  <pixel@mandrakesoft.com>
-
-	* loopback.pm (create): don't use seek to create big files otherwise you
-	get hole and
-	swapon doesn't like it
-
-	* any.pm (ask_users): default icon "man"
-
-	* lang.pm: compatibility with older $o->{lang} names (for auto_installs)
-
-	* install2.pm: initial support for server install
-	compatibility with older $o->{lang} names (for auto_installs)
-
-	* install_steps_gtk.pm: initial support for server install
-
-	* printerdrake.pm: help perl_checker
-
-	* pkgs.pm, share/rpmsrate, install_any.pm: 
-	  - gmc instead of nautilus for non-latin1 installs
-	  - introduce CHARSET flag and use it
-
-2001/09/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Network is now only required (and checked) for remote
-	printers.
-	Several buglets fixed in remote CUPS server dialog.
-
-	* printerdrake.pm: Removed a forgotten debug help line from the code.
-	Fixed typo in dialog text of high/paranoid security.
-	Network is now only required (and checked) for remote printers.
-	Several buglets fixed in remote CUPS server dialog.
-
-2001/09/18  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: don't ask to connect if lan or dhcp
-
-2001/09/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install2.pm: don't create bootdisk by default
-
-	* share/po/fr.po: misc
-
-2001/09/18  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (write_passwd_user): fix setting "pw" field (for auto_installs)
-
-	* install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big
-	installs
-
-2001/09/18  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, my_gtk.pm: corrected Speedtouch -> speedtouch
-
-	* network/netconnect.pm: don't ask to connect if lan or dhcp
-
-	* standalone/drakgw: debug
-
-2001/09/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added X group with SYSTEM.
-	finally work arounded rpm bug by flepied.
-
-	* detect_devices.pm: added back full pci probe for stage2 command lspci.
-	removed full pci probe for stringlist (used for generating report_bug).
-
-	* install_steps_interactive.pm: now finally really fixed printer label in
-	summary dialog.
-	fixed printer description in summary (again).
-	fixed no printer displayed (at least, print Remote CUPS server).
-
-	* commands.pm: make lspci a full pci probe instead of safe pci probe.
-
-2001/09/18  gbeauchesne
-
-	* Xconfigurator.pm: 
-	  - Force XFree 4 on IA-64. No XFree 3.3.X there...
-
-	* tools/ia64/elilo.efi: 
-	  - elilo 3.1
-
-2001/09/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install2.pm: don't create bootdisk by default
-
-	* standalone/drakautoinst: have "manual" and "replay" translated
-
-	* share/po/fr.po: misc
-
-2001/09/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po, share/po/hu.po: updated Dutch and Hungarian files
-
-2001/09/18  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm, share/gen_locales.sh, share/locales-skeleton.tar.bz2: 
-	  - remove ISO-8859-5, KOI8-R and KOI8-U
-	  - cleanup packdrake extracting locales
-	  - cleanup/fixes lang.pm
-
-	* install_steps.pm: fix setting kdmrc for latin1
-
-	* any.pm (write_passwd_user): fix setting "pw" field (for auto_installs)
-
-	* install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big
-	installs
-
-2001/09/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/list: updated for rpm 4.0.3.
-
-	* rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of
-	"rpm --root" but need more testing.
-
-	* standalone/XFdrake: removed comment.
-	added support to configure NVIDIA driver if everything is correctly
-	installed.
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, fsedit.pm: 
-	  - '--' to separate options for supermount + small workaround (ro and
-	exec before --)
-	  - fix nfs in manualFstab (for auto_installs, reported by David
-	Eastcott)
-
-2001/09/17  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written
-	in expert install.
-
-2001/09/17  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: no expert mode needed to choose gateway
-
-2001/09/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/list: updated for rpm 4.0.3.
-
-	* rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of
-	"rpm --root" but need more testing.
-
-	* printerdrake.pm: add eval around installing lexmark-driver
-	(proprietary).
-
-	* Xconfigurator.pm: deactivating bad card test (too).
-
-	* standalone/XFdrake: removed comment.
-	added support to configure NVIDIA driver if everything is correctly
-	installed.
-
-2001/09/17  odin
-
-	* share/po/fr.po: updated fr.po
-
-2001/09/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: Added choice of "English|Ireland (euro)" so people wanting
-	English language but also euro symbol can choose it.
-	fixed Belgian keyboard
-
-	* share/po/fr.po, share/po/wa.po, share/po/es.po: updated Spanish and
-	Wallon files; corrected error syntax in French file
-
-	* lang.pm: Added choice of "English|Ireland (euro)" so people wanting
-	English language but also euro symbol can choose it.
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: 
-	  - '--' to separate options for supermount + small workaround (ro and
-	exec before --)
-	  - fix nfs in manualFstab (for auto_installs, reported by David
-	Eastcott)
-	(mount): do not hand update /etc/mtab for nfs mounts, already done by
-	mount(8)
-	(set_default_options): disable iocharset= and codepage= for supermount
-
-	* partition_table.pm (adjust_main_extended): do not use linux extended
-
-	* detect_devices.pm (pci_probe): log full pci probes
-
-	* standalone/drakbug_report: fix
-
-	* fsedit.pm: 
-	  - '--' to separate options for supermount + small workaround (ro and
-	exec before --)
-	  - fix nfs in manualFstab (for auto_installs, reported by David
-	Eastcott)
-
-2001/09/17  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written
-	in expert install.
-	Do not die when "chkconfig" fails (needed for "security_check").
-	Added "-q" option to foomatic-configure (should not get interactive).
-	Added handling of high and paranoid security levels.
-
-	* printerdrake.pm: /etc/foomatic/defaultspooler was not written in expert
-	mode installation.
-	Added handling of high and paranoid security levels.
-
-2001/09/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: add eval around installing lexmark-driver
-	(proprietary).
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (pci_probe): log full pci probes
-
-	* fs.pm (set_default_options): disable iocharset= and codepage= for
-	supermount
-
-2001/09/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: add eval around installing lexmark-driver
-	(proprietary).
-
-2001/09/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (pci_probe): log full pci probes
-
-2001/09/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
-
-	* pkgs.pm (read_rpmsrate): fix bug
-
-2001/09/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug which prevented from printing the option list
-	during install.
-	Fixed bug which prevents printerdrake from running without PDQ
-	installed.
-
-2001/09/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
-	more up to my need ALL flag in compssUsersChoice
-	remove auto-install special case (initialisation of compssUsersChoice)
-
-	* share/rpmsrate: 
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-
-	* pkgs.pm: more up to my need ALL flag in compssUsersChoice
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-
-	* rescue/make_rescue_img: use new mkdir_p, rm_rf and cp_af from
-	MDK::Common
-
-2001/09/16  siegel
-
-	* share/po/help_xml2pm.pl: added "systemitem"
-
-2001/09/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug which prevents printerdrake from running without
-	PDQ installed.
-
-2001/09/16  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm, my_gtk.pm: bugfix + cosmetic changes
-
-2001/09/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help.pm file
-
-	* share/po/hu.po: updated Hungarian file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2001/09/16  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: "please click on ..." for removable, nfs, smb.
-
-	* fsedit.pm: enhance lvm handling (mostly standalone)
-	  - cleanup & enhance raid mdstat reading (now works with or without
-	devfs mounted)
-	  - chunk size is buggy?
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
-	more up to my need ALL flag in compssUsersChoice
-	remove auto-install special case (initialisation of compssUsersChoice)
-	use new mkdir_p, rm_rf and cp_af from MDK::Common
-
-	* share/rpmsrate: 
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-
-	* verify_c: add special case for c::to_utf8
-
-	* pkgs.pm: more up to my need ALL flag in compssUsersChoice
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-	use new mkdir_p, rm_rf and cp_af from MDK::Common
-
-	* services.pm, install2.pm, lang.pm, commands.pm, loopback.pm,
-	tinyfirewall.pm, raid.pm, keyboard.pm, printerdrake.pm, fs.pm, mouse.pm,
-	network/netconnect.pm, timezone.pm, network/adsl.pm, install_steps.pm,
-	any.pm, printer.pm, rescue/make_rescue_img, bootloader.pm: use new
-	mkdir_p, rm_rf and cp_af from MDK::Common
-
-	* diskdrake_interactive.pm, lvm.pm: enhance lvm handling (mostly
-	standalone)
-
-	* devices.pm (make): ensure it never returns a non-absolute name
-	(it happened with make("foo") when cwd=/dev and /dev/foo existed)
-
-2001/09/16  siegel
-
-	* share/po/help_xml2pm.pl: added "systemitem"
-	added commet explainig that help.pm is automatically generated.
-
-	* .cvsignore: added .*.sw? for vim users
-
-2001/09/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Added possibility to list command line
-	options for the printers and to give the users help for printing
-	Fixed bug of sometimes appearing the wron dialog after printing test
-	pages
-
-2001/09/15  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix options appearing twice in fstab
-
-	* install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc
-
-	* lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
-	installs)
-
-	* install_steps_auto_install.pm (enteringStep): do not translate in
-	ja|ko|zh
-
-2001/09/15  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix options appearing twice in fstab
-
-	* install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc
-
-	* lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
-	installs)
-
-	* install_steps_auto_install.pm (enteringStep): do not translate in
-	ja|ko|zh
-
-2001/09/15  civileme
-
-	* help.pm: Added a dialog in English for users selecting a printing system
-	since no other
-	OS seems to offer such a choice during install.
-
-2001/09/15  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: better connection testing
-
-	* network/tools.pm: more timeout
-
-	* network/adsl.pm: avoid asking 2 times to restart the ethernet card
-
-	* mouse.pm: readded darea realization
-
-2001/09/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: make gtk-themes installed when Gnome is choosen
-
-	* share/po/es.po: updated Spanish file
-
-	* share/po/wa.po, share/po/hu.po: updated Hungarian file
-
-2001/09/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile.config, tools/Makefile: add aewm-drakx
-
-	* install_steps_gtk.pm: makes cancel on mouse selection works even better
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* install_gtk.pm, tools/aewm-drakx/Makefile, tools/aewm-drakx/misc.c,
-	tools/aewm-drakx/README: 
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* any.pm: i18n kdmrc
-	fix user icons choice
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* install2.pm: don't warn if modules are missing when testing
-
-	* bootloader.pm: find error in /tmp/.error only if exception is "xxx
-	failed"
-	(write_lilo_conf): ensure linear and lba32 are not both set
-
-	* share/po/fake_c.pl: fix a tricky hack
-
-	* my_gtk.pm: do the set_events before the show otherwise gtk go crazy (no
-	more keyboard focus)
-
-	* c/stuff.pm: i18n kdmrc
-
-	* lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
-	installs)
-
-	* install_steps_interactive.pm: fix typo
-	find error in /tmp/.error only if exception is "xxx failed"
-	makes cancel on mouse selection works even better
-	fix cancel on mouse choice
-
-	* install_steps.pm: i18n kdmrc
-	enable supermount again
-
-	* network/adsl.pm: correct dams typo
-
-	* fs.pm (write_fstab): fix supermount moving from options to fstype
-
-	* steps.pm: find error in /tmp/.error only if exception is "xxx failed"
-
-	* tools/aewm-drakx/aewm.h, tools/aewm-drakx/client.c,
-	tools/aewm-drakx/events.c, tools/aewm-drakx/aewm-drakx.c: set_focus on
-	new map_request event (fix summary step)
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* install_steps_auto_install.pm (enteringStep): do not translate in
-	ja|ko|zh
-
-2001/09/15  siegel
-
-	* share/po/de.po: fixed another typo
-	new string
-
-	* printerdrake.pm: added missing _()
-
-	* standalone/draksec: use " instead of ' to get i18n
-
-	* standalone/draknet: fixed missing _()
-
-2001/09/15  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added the PDQ panic button.
-	Removed a superfluous "set_help" line.
-	Save default spooler at program start, fixed typos in comments.
-	Command line commands as "lpr", "lpq", ... are mapped to the correct
-	spooler now.
-	Fixed bug of a waiting message appearing together with a dialog
-	Cleaned up variables to correctly switch between CUPS/Foomatic/Raw type
-	for a printer
-
-	* printer.pm: Added the PDQ panic button.
-	Command line commands as "lpr", "lpq", ... are mapped to the correct
-	spooler now.
-
-	* standalone/printerdrake: Fixed bug of spooler choice via command line
-	options being ignored.
-
-2001/09/15  warly
-
-	* share/rpmsrate: add drakfirsttime
-
-2001/09/14  dam's  <damien@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: make test_pms happy
-
-	* install_any.pm: pptp-adsl instead of pptp-adsl-fr
-
-	* Xconfigurator.pm: no shadow when X test
-
-	* standalone.pm: bugfix
-
-	* my_gtk.pm: no icon if wizard
-	no shadow when X test
-	shadow color
-
-	* bootlook.pm: bugfix
-	iautologin correction
-
-	* mouse.pm: trying to remove draw
-
-	* network/adsl.pm: debug
-	pptp-adsl instead of pptp-adsl-fr
-	bugfix
-	updated speedtouch handling.
-
-2001/09/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: removed S3 ViRGE card from card with problem with
-	frame buffer as it works fine.
-
-	* Xconfigurator.pm: fixed filtering of depth for newt version.
-	depth 24 is used for DRI for Rage 128 and Radeon instead of Depth 32 (as
-	depth
-	32 simply doesn't work, even if DRI guide says it works :-) 24 bit works
-	fine
-	for Rage 128.
-	apply restriction on depth available when changing resolution, removed
-	S3 ViRGE
-	from experimental 3D accelerated card list as it really does not work,
-	allow on
-	second pass to change card configuration to choose server (experimental
-	server
-	are still only available to expert), added support for UseCCEFor2D for
-	Rage 128
-	card if a TV card is installed (set to true, else set to false), added
-	support
-	for Rage Mobility M... card that are Rage 128 Mobile chipset, improved
-	error
-	message display to catch only appropriate error message of XFree 4.1.0
-	only,
-	added support for 32 bits for DRI using Matrox card, improved info
-	message with
-	real version of XFree used (anybody) and identifier from PCI probe
-	(expert).
-
-2001/09/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/insmod-busybox/Makefile: clean also cleans the DIET target
-
-	* mdk-stage1/Makefile, mdk-stage1/Makefile.mkinitrd_helper: back to using
-	a reduced form of mkinitrd_helper for mkinitrd (only
-	to provide a dietlibc-enabled static insmod)
-
-2001/09/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po: updated Walloon file
-
-	* share/po/ko.po: updated Korean file
-
-	* share/po/da.po: updated Danish file
-	updated Danish file
-
-	* share/po/bs.po, share/po/sv.po: updated Bosnian and Swedish files
-
-2001/09/14  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_raw.pm, install_any.pm: when testing for bad drives, if
-	opening for writing fails, remove the drive from the hard drive list
-	(useful for Smartmedia readers)
-
-	* pkgs.pm: update correctSize and invCorrectSize (now linear)
-
-	* share/po/fr.po: fix odin bug (please run msgfmt before committing!)
-
-	* share/rpmsrate: do not install Aurora in russian
-
-2001/09/14  siegel
-
-	* share/po/de.po: updates
-
-	* standalone/drakautoinst: Check exisence of "/root/replay_install.img"
-	before anything else ...
-
-2001/09/14  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added "set_help" lines for installer help texts.
-	Raw queue entry added, so cursor not always on "Alps MD-1000" when no
-	printer
-	detected.
-	Resolved conflict.
-	Now it is checked whether the network is configured and running.
-	draknet is called when the network is not configured.
-	It is checked whether the spooler is automatically started at boot.
-	The oki4daemon is started when needed.
-	Lexmarks inkjet drivers are fully integrated.
-	The permissions of the device files are set so that normal users can
-	print with PDQ.
-
-	* standalone/printerdrake: Fixed spooler selection by command line.
-
-	* printer.pm: Raw queue entry added, so cursor not always on "Alps
-	MD-1000" when no printer
-	detected.
-	Made network checking working on non-english systems.
-	Now it is checked whether the network is configured and running.
-	draknet is called when the network is not configured.
-	It is checked whether the spooler is automatically started at boot.
-	The oki4daemon is started when needed.
-	Lexmarks inkjet drivers are fully integrated.
-	The permissions of the device files are set so that normal users can
-	print with PDQ.
-
-2001/09/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po, share/po/tr.po: updated Turkish and Bulgarian files
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po,
-	share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2001/09/13  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added mt-st to ARCHIVING
-
-2001/09/13  odin
-
-	* share/po/fr.po: updated up to 6648
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: new migration feature for creation of
-	partitions on existing mount points
-
-	* diskdrake.pm: 
-	  - add back shortcuts
-	  - red colored buttons in nfs/smb/removable
-
-2001/09/13  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/wiz_default_up.png, pixmaps/wiz_draknet.png: updated
-
-	* my_gtk.pm: updated
-	addde /usr/share/icons in path for pixmaps search
-	shadow reduced to 5 pixels
-
-	* standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added mt-st to ARCHIVING
-
-2001/09/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes
-	trouble to XFree86 4.1.0.
-
-	* Xconfigurator.pm: fix for missing Xinerama for Matrox cards.
-	fix for Matrox G550 support, now add DRI support.
-	disable any question to user about XF3 if he choose a dual head
-	configuration.
-	disable DRI if Xinerama has been chosen.
-	updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
-	Tseng ET6\d00.
-
-	* install_any.pm: updates 3D category according Matrox G550 and Radeon
-	card.
-
-	* install_steps.pm: synced with Xconfigurator bad_card class of video card
-	to avoid using frame
-	buffer, added ET6\d00 style card which seems to have problem.
-
-2001/09/13  odin
-
-	* share/po/fr.po: updated up to 6648
-	updated fr.po
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add krozat
-
-	* any.pm (inspect): use a safer dir when standalone
-
-	* install_steps.pm: extend disable KDE GreetString to
-	ja|ko|zh|ru|th|vi|be|bg
-	do not translate kdm GreetString in ja|ko|zh (what about ru?)
-	in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-	* diskdrake_interactive.pm: new migration feature for creation of
-	partitions on existing mount points
-
-	* diskdrake.pm: 
-	  - add back shortcuts
-	  - red colored buttons in nfs/smb/removable
-
-	* partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
-	the fly without rebooting on a device with some already mounted
-	partitions)
-
-	* install_steps_interactive.pm (selectKeyboard): don't prompt in newbie
-	mode if >=90, not >90
-
-2001/09/13  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: shadow reduced to 5 pixels
-
-	* standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix for missing Xinerama for Matrox cards.
-	fix for Matrox G550 support, now add DRI support.
-	disable any question to user about XF3 if he choose a dual head
-	configuration.
-	disable DRI if Xinerama has been chosen.
-	updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
-	Tseng ET6\d00.
-	avoid creating /etc/X11/XF86Config* file if --g_auto_install.
-
-	* services.pm: updated repartition of services into category, network
-	category are commented so
-	that service will to "Other" one.
-
-	* Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes
-	trouble to XFree86 4.1.0.
-
-	* install_any.pm: updates 3D category according Matrox G550 and Radeon
-	card.
-
-	* install_steps.pm: synced with Xconfigurator bad_card class of video card
-	to avoid using frame
-	buffer, added ET6\d00 style card which seems to have problem.
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm: filtered the list from lang2keyboard to display only valid
-	keyboards
-
-	* c/stuff.xs.pm: add partition adding on the fly trick
-
-	* partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
-	the fly without rebooting on a device with some already mounted
-	partitions)
-
-	* install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what
-	about ru?)
-	in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-2001/09/13  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* lang.pm: fixed bad $localedir in load_mo().
-
-	* g_auto_install: updated so that this scripts is running again.
-
-	* install2.pm: do not output error message for bad kernel if using
-	--g_auto_install.
-
-	* install_steps_interactive.pm: fixed Printer name reporting for a
-	specific printer.
-
-	* install_any.pm: updates 3D category according Matrox G550 and Radeon
-	card.
-
-	* services.pm: updated repartition of services into category, network
-	category are commented so
-	that service will to "Other" one.
-
-	* live_install2: updated #! as ../perl is not used.
-
-	* my_gtk.pm: synced with --g_auto_install mode.
-
-	* install_steps.pm: synced with Xconfigurator bad_card class of video card
-	to avoid using frame
-	buffer, added ET6\d00 style card which seems to have problem.
-
-	* Xconfigurator.pm: fix for Matrox G550 support, now add DRI support.
-	disable any question to user about XF3 if he choose a dual head
-	configuration.
-	disable DRI if Xinerama has been chosen.
-	updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
-	Tseng ET6\d00.
-	avoid creating /etc/X11/XF86Config* file if --g_auto_install.
-	synced with --g_auto_install mode.
-	disable testing with all SiS card except SiS 630 under XF4.
-
-2001/09/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/pl.po, share/po/pt.po, share/po/no.po,
-	share/po/th.po, share/po/sr.po, share/po/sk.po, share/po/lt.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/ko.po, share/po/lv.po,
-	share/po/uk.po, share/po/nl.po, share/po/ja.po, share/po/sv.po,
-	share/po/id.po: updated pot file
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm: filtered the list from lang2keyboard to display only valid
-	keyboards
-
-	* c/stuff.xs.pm: add partition adding on the fly trick
-
-	* partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
-	the fly without rebooting on a device with some already mounted
-	partitions)
-
-	* install2.pm (selectKeyboard): remove code causing
-	install_steps::selectKeyboard to be skipped
-
-	* install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what
-	about ru?)
-	in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-2001/09/12  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: typo
-	new color for shadow
-	corrected shadow handling
-	no shadow if liveupdate
-
-	* share/help.png: new help
-
-	* mouse.pm: removed debug code
-
-	* network/tools.pm, network/netconnect.pm, network/ethernet.pm,
-	network/isdn.pm, network/adsl.pm, network/modem.pm: new default
-	connection handling
-
-	* standalone.pm: added wait message while installing package
-
-2001/09/12  daouda
-
-	* standalone/drakbug_report: add Mandrake release section
-
-2001/09/12  fcrozat
-
-	* share/rpmsrate: Fix gnome install
-
-2001/09/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: removed obsolete --nocpi flag for install2.
-	avoid probing usb device (for mouse) if --noauto is given.
-
-	* install_steps.pm: disabled frame buffer for most of the SiS display card
-	except SiS 630.
-
-	* Xconfigurator.pm: added MGA G550 as always having two head.
-
-	* live_install2: fix when switching perl version.
-
-	* live_install: use system perl instead.
-
-2001/09/12  gbeauchesne
-
-	* share/list.ia64, share/list, share/list.i386: 
-	  - list (/sbin/mkfs.jfs, /sbin/mkfs.xfs): Move to...
-	  - list.i386: ... Here.
-	  - list.ia64: Updates.
-
-2001/09/12  odin
-
-	* share/po/fr.po: updated fr.po
-
-2001/09/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
-	share/po/et.po, share/po/el.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/hr.po, share/po/vi.po, share/po/ca.po,
-	share/po/gl.po, share/po/eo.po, share/po/help_xml2pm.pl, share/po/wa.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po,
-	share/po/it.po, share/po/af.po: updated pot file
-
-	* help.pm: new version with [ and ]
-
-	* lang.pm: commented out utf-8 russian locale, for now
-
-2001/09/12  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/lsnetdrake: fix typo
-	added wonderful lsnetdrake
-
-	* modules.pm, install2.pm: display error when the kernel mismatch the
-	modules
-
-	* docs/README: explain how to get the boot kernels
-
-	* install_steps_gtk.pm (choosePackagesTree): translate the categories
-
-	* standalone/drakbug_report: cleanup
-
-	* bootloader.pm (suggest): no "quiet" boot for smp and enterprise kernels
-	(suggest): no "quiet" boot for smp and enterprise kernels
-	allow grub even for more than 800MB
-
-	* Makefile.drakxtools, Makefile.config: added wonderful lsnetdrake
-
-2001/09/12  siegel
-
-	* share/po/de.po: new & shiny verion
-
-	* share/po/help_xml2pm.pl: fixed silly error
-	added keycap patch
-
-2001/09/12  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: corrected shadow handling
-	no shadow if liveupdate
-	table undef corrected
-	removed shadows if standalone
-
-	* standalone/drakgw, standalone/draknet: corrected wizard mode in newt
-	mode
-
-	* mouse.pm: removed debug code
-
-	* network/netconnect.pm: corrected splash in non X mode
-
-2001/09/12  daouda
-
-	* standalone/drakbug_report: add Mandrake release section
-
-2001/09/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* live_install2: fix when switching perl version.
-
-	* live_install: use system perl instead.
-
-2001/09/12  kjx
-
-	* share/po/zh_CN.po: revison
-
-2001/09/12  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/README: explain how to get the boot kernels
-
-	* install_steps_gtk.pm (choosePackagesTree): translate the categories
-
-	* standalone/drakbug_report: cleanup
-
-	* bootloader.pm: allow grub even for more than 800MB
-
-2001/09/11  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: removed useless print
-	don't detect ethx if no autodetection.
-	implement smarter checkboxes
-
-	* mouse.pm: test updated
-	mouse test worked
-
-	* network/ethernet.pm: don't detect ethx if no autodetection.
-	implement smarter checkboxes
-
-	* pixmaps/arrow_down.xpm: pixmap corrected
-	new arrows
-
-	* pixmaps/arrow_up.xpm: new arrows
-
-	* share/rpmsrate: added ibod
-	added isdn-light
-
-	* interactive_gtk.pm, my_gtk.pm: fear the shaped windows...
-
-2001/09/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: small fix
-
-	* share/po/fr.po, share/po/de.po, share/po/DrakX.pot, share/po/hu.po,
-	share/po/it.po: updated Hungarian file;
-	updated pot file
-
-2001/09/11  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile (tar-drakxtools): remove the building of "help" for drakxtools
-
-	* bootloader.pm: for lilo, do not have table=/dev/xxx if the device is not
-	a primary
-	partition (otherwise lilo dies)
-
-2001/09/10  dam's  <damien@mandrakesoft.com>
-
-	* network/modem.pm, network/ethernet.pm: detect_devices
-
-	* standalone/net_monitor, network/network.pm: removed timeout:1 in
-	resolv.conf, modified timeout scanning in draknet/net_monitor
-
-	* install_gtk.pm, install_steps_gtk.pm: mouse test moved
-
-	* mouse.pm: test_mouse moved
-
-	* my_gtk.pm: added border
-	window decorations
-	no set_events if embedded
-
-	* standalone/draknet: removed timeout:1 in resolv.conf, modified timeout
-	scanning in draknet/net_monitor
-	debug
-
-	* standalone/mousedrake: don't fork the code
-
-	* network/adsl.pm: debug
-	debug
-
-2001/09/10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: updated g_auto_install() for newer printerdrake
-	interface.
-
-	* modules.pm, detect_devices.pm: moved modules::get_pcmcia_devices into
-	detect_devices::pcmcia_probe.
-
-	* mdk-stage1/init-data/msgboot-blank.img.bz2: initial release for
-	blank.img floppy image.
-
-	* install_steps_interactive.pm, mouse.pm: added hid type usb mouse
-	support.
-
-	* Xconfigurator_consts.pm: added some more ModeLine (1024x768 @ 97.6 Hz,
-	1024x480 but not automatically used).
-
-2001/09/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: plop
-	some adjustements in Games section
-
-2001/09/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/de.po: updated German file; added choice of
-	various quotes in help_xml2pm.pl
-	Updated pot file;
-	removed translations that are too low on percentage.
-
-	* share/po/zh_TW.po: updated Chinese file
-
-	* share/po/ko.po: updated Korean file
-	Updated pot file;
-	removed translations that are too low on percentage.
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated pot file;
-	removed translations that are too low on percentage.
-
-	* share/po/help_xml2pm.pl: updated German file; added choice of various
-	quotes in help_xml2pm.pl
-
-2001/09/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm, my_gtk.pm: 
-	  - make diskdrake work in embedded mode
-	  - $my_gtk::pop_it used where it should
-
-	* detect_devices.pm: fix ide-scsi appearing 2 times when standalone
-	because both in /proc/ide
-	and /proc/scsi/scsi
-
-	* share/po/help_xml2pm.pl: s/my/our/ for $i18ned_... vars
-	  - skip directories missing drakx-help.xml
-	  - convert to the right charset (taken from $lang.po)
-	  - rename help-*.po by help-*.pot
-	  - fix typo in script removing $lang.po translations to favour
-	help-*.pot
-
-	* diskdrake.pm: 
-	  - make diskdrake work in embedded mode
-	  - $my_gtk::pop_it used where it should
-	fix Umount and Mount when i18ned for nfs/smb
-	don't display Wizard if wizard done before DrakX
-
-	* share/po/Makefile, share/po/.cvsignore: 
-	  - rename help-*.po by help-*.pot
-	  - fix typo in script removing $lang.po translations to favour
-	help-*.pot
-
-2001/09/10  siegel
-
-	* share/po/de.po: updates
-
-2001/09/10  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Copying of PPD file when moving a CUPS (non-Foomatic) queue
-	modified to not get
-	interactive when overwriting a file.
-	Comment put into non-Foomatic CUPS PPD files in /etc/cups/ppd/ to be
-	able to
-	  identify which PPD from /usr/share/cups/model was used (for
-	auto-install).
-
-2001/09/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated pot file;
-	removed translations that are too low on percentage.
-
-2001/09/10  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile, share/po/.cvsignore, share/po/help_xml2pm.pl: 
-	  - rename help-*.po by help-*.pot
-	  - fix typo in script removing $lang.po translations to favour
-	help-*.pot
-
-2001/09/09  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: probeall handling
-
-2001/09/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: getAndSaveInstallFloppy: fix multiple cdrom issue
-
-2001/09/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-	* share/po/sv.po: updated Swedish file
-
-2001/09/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (ejectCdrom): fix D state on exit
-
-	* diskdrake_interactive.pm, install_interactive.pm, diskdrake.pm: 
-	  - "Wizard" and "More" are back
-	  - allow "Use for loopback" when there is already a loopback
-	  - set the options on newly created partitions
-	  - recompute_loopbacks called after modification of loopbacks, no more
-	before reading
-	  - restrict the lenght of the lines in partition description
-	  - make loopback work
-
-	* interactive_gtk.pm, interactive.pm, any.pm, interactive_newt.pm:
-	clicked_may_quit used in place of clicked+exception to work-around
-	perl-GTK bug (?)
-
-	* share/po/i18n_compssUsers: ensure we're not adding a string already
-	there (otherwise msgmerge yells)
-
-	* share/po/help_xml2pm.pl, share/po/.cvsignore: xml help
-	handling/enhancing for multi-langs
-
-	* modules.pm: probeall handling
-	(write_conf): switch to "probeall scsi_hostadapter ..."
-
-	* share/po/Makefile: xml help handling/enhancing for multi-langs
-	xml help handling/enhancing for multi-langs
-
-	* partition_table.pm (get_normal_parts_and_holes): remove only small
-	holes, not small partitions
-
-	* fs.pm (set_default_options): remove iocharset=... for nfs (why was it
-	there?)
-
-2001/09/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix some ortograf
-
-	* share/rpmsrate: lvm not installed for everyone ?!
-
-2001/09/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm: force exitInstall to be non automatic
-
-	* install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm,
-	diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback
-	installs work again
-
-2001/09/09  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): switch to "probeall scsi_hostadapter ..."
-
-2001/09/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix some ortograf
-
-	* share/rpmsrate: lvm not installed for everyone ?!
-
-	* modules.pm: fix write_conf regarding /etc/modules so that (1) it doesn't
-	flush it when
-	it didn't decide to put any modules in it (to leave user's modules) (2)
-	it
-	doesn't remove the last line (3) it uses stronger regexp'es for
-	substitution to not remove modules that have names made of other modules
-	names subsets
-
-2001/09/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_TW.po: updated Chinese file
-
-2001/09/08  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm: fix font in iso-15
-
-	* modules.pm (write_conf): put "probeall scsi-hosts scsi_hostadapter ..."
-
-	* interactive.pm: ugly workaround perl bug ([ID 20010908.008] memory leak
-	with nested subs)
-
-	* share/diskdrake.rc: change name
-
-	* install_steps_auto_install.pm: force exitInstall to be non automatic
-
-	* install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm,
-	diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback
-	installs work again
-
-	* timezone.pm: Asia/Taipei for Traditional Chinese
-
-	* detect_devices.pm: remove debug code
-
-2001/09/07  daouda
-
-	* share/rpmsrate: add mdkonline (X 4)
-
-2001/09/07  fcrozat
-
-	* share/rpmsrate: Add grio500
-
-2001/09/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix card managed only by XF4 (may have some wrong
-	result).
-	fix all Matrox card used with XF4 which really does not like X in frame
-	buffer
-	(unable to restore frame buffer of DrakX).
-
-2001/09/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/tree/etc/oem, rescue/guessmounts, rescue/list.i386,
-	rescue/tree/etc/rc.sysinit: ext3, xfs, jfs
-
-	* bootloader.pm: use -v for mkinitrd
-
-	* share/po/fr.po: "reseaux" and plurals
-	misc
-
-	* share/rpmsrate: some work on games
-
-2001/09/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po, share/po/vi.po: updated Vietnamese and Japanese files
-
-2001/09/07  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: cleanup po
-
-	* install_steps.pm: s|kdmrc|kdm/kdmrc|
-
-	* lang.pm: fix load_mo call
-
-	* share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help
-
-	* diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting
-	disable_forced_fsck called for ext3 formatting
-	(Type): disable fsck when migrated ext2->ext3
-
-	* fs.pm: disable_forced_fsck called for ext3 formatting
-
-2001/09/07  siegel
-
-	* share/po/de.po: updates
-
-2001/09/07  Till Kamppeter <till@mandrakesoft.com>
-
-	* standalone/printerdrake, printer.pm, printerdrake.pm: Data structure
-	fitted for auto-install to work
-	Optimized program to be much faster
-	Many more waiting messages
-	Many bugfixes
-
-2001/09/07  daouda
-
-	* share/rpmsrate: add mdkonline (X 4)
-
-2001/09/07  fcrozat
-
-	* share/rpmsrate: Add grio500
-
-2001/09/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix card managed only by XF4 (may have some wrong
-	result).
-	fix all Matrox card used with XF4 which really does not like X in frame
-	buffer
-	(unable to restore frame buffer of DrakX).
-
-2001/09/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* any.pm: Changed simple quote to double quote for a translatable string
-	(otherwise
-	it isn't seen)
-
-	* share/po/es.po: updated Spanish file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po,
-	share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po,
-	share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
-	updated pot file
-
-	* share/po/sv.po: updated Swedish file
-	updated pot file
-
-2001/09/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: s|kdmrc|kdm/kdmrc|
-	remove the "konsole and gnome-terminal are lamers in exotic languages,
-	link them to something better"
-
-	* bootloader.pm (write_lilo_conf): fix typo
-
-	* share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help
-
-	* diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting
-	disable_forced_fsck called for ext3 formatting
-	(Type): disable fsck when migrated ext2->ext3
-
-	* install_any.pm, keyboard.pm: cleanup
-
-	* partition_table.pm, share/list: add xfs
-
-	* fs.pm: disable_forced_fsck called for ext3 formatting
-
-	* share/rpmsrate: add jfsprogs
-
-2001/09/07  siegel
-
-	* share/po/de.po: updates
-	updates/fixes
-
-2001/09/06  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm: corrected speedtouch
-
-	* install_gtk.pm: removed comments
-
-2001/09/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using
-	XFree 4.1.0 is not bad, and
-	all NVIDIA card are no more considered bad.
-
-	* pkgs.pm: fixed retry of package 3 times everytime even if first install
-	succeeded, now
-	after first successfull install, go to next package to install.
-
-	* install_steps.pm: removed some cards for allowing frame buffer.
-
-2001/09/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: works now ;p
-
-2001/09/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: 'zh' in LANGUAGE for Chinese is needed by DrakX
-	corrected lang.pm to have coherence in locale usage (it was the source
-	of much of the problems); changed keyboard.pm to ignore charset encoding
-	in locale name for locale -> keyboard guessing.
-	removed unused gconv modules, converted az.po to utf-8 (as it was the
-	only
-	remaining az.po on Earth still in a non standard encoding)
-
-	* share/list, share/gen_locales.sh, share/locales-skeleton.tar.bz2,
-	keyboard.pm, share/po/az.po: corrected lang.pm to have coherence in
-	locale usage (it was the source
-	of much of the problems); changed keyboard.pm to ignore charset encoding
-	in locale name for locale -> keyboard guessing.
-	removed unused gconv modules, converted az.po to utf-8 (as it was the
-	only
-	remaining az.po on Earth still in a non standard encoding)
-
-2001/09/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: fix keyboard config + some cleanup
-	cleanup (use /proc/self instead of /proc/$$)
-
-	* install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix
-	keyboard config + some cleanup
-
-2001/09/06  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm: corrected speedtouch
-
-	* install_gtk.pm: removed comments
-
-2001/09/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using
-	XFree 4.1.0 is not bad, and
-	all NVIDIA card are no more considered bad.
-	avoid using @resolutions_laptop, now use only @resolutions, this means
-	1400x1050
-	is available to other, use XFree86 4.1.0 builtin timings for 1400x1050
-	(so
-	1400x1050 is no more printed as modeline for XFree 4.1.0 configuration
-	file).
-
-	* install_steps.pm: removed some cards for allowing frame buffer.
-	fix log when configuring printer queue.
-
-	* Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres.
-	cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050
-	and
-	1920x1440, 2048x1536 has no modeline (but its min hsync is really high).
-
-	* pkgs.pm: fixed retry of package 3 times everytime even if first install
-	succeeded, now
-	after first successfull install, go to next package to install.
-
-	* install_any.pm: update printer data for g_auto_install.
-
-2001/09/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: works now ;p
-
-2001/09/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: fix keyboard config + some cleanup
-	cleanup (use /proc/self instead of /proc/$$)
-
-	* install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix
-	keyboard config + some cleanup
-
-	* fs.pm (merge_fstabs): correction allowing manual_fstab to not give the
-	type
-
-2001/09/06  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm: corrected speedtouch
-
-	* install_gtk.pm: removed comments
-	new mouse test
-
-2001/09/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: revert previous patch, this is not usable with current rpm as
-	it complains if
-	one the file has a modified MD5SUM against the header describing it in
-	the
-	hdlist, so this is most of the time useless.
-	guess filename if the file is not found (for an rpm file during
-	installation),
-	so try with release incremented in such case (good for Cooker user or
-	local
-	tester using network installation).
-
-	* install_steps.pm: fix log when configuring printer queue.
-
-	* Xconfigurator.pm: avoid using @resolutions_laptop, now use only
-	@resolutions, this means 1400x1050
-	is available to other, use XFree86 4.1.0 builtin timings for 1400x1050
-	(so
-	1400x1050 is no more printed as modeline for XFree 4.1.0 configuration
-	file).
-
-	* Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres.
-	cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050
-	and
-	1920x1440, 2048x1536 has no modeline (but its min hsync is really high).
-
-	* install_any.pm: update printer data for g_auto_install.
-
-	* printerdrake.pm: revert previous commit.
-	added a missing ifup lo, on some case (auto_install) it fails.
-
-	* printer.pm: start ifup lo before starting service cups.
-
-2001/09/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-	* share/po/ga.po, share/po/no.po: updated Irish and Norwegian files
-
-2001/09/06  Pixel  <pixel@mandrakesoft.com>
-
-	* share/diskdrake.rc, fsedit.pm, diskdrake.pm: add journalised in legend,
-	fix the use
-
-	* diskdrake_interactive.pm (Add2LVM): do not allow spaces in lvm names
-
-	* fs.pm (merge_fstabs): correction allowing manual_fstab to not give the
-	type
-
-	* timezone.pm (ntp_server): fix (step-tickers was empty)
-
-2001/09/05  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor, standalone/draknet: corrected opeions
-
-	* standalone/mousedrake: typo
-	updated
-
-	* network/tools.pm: corrected initcript
-
-	* pixmaps/mouse_middle.xpm, pixmaps/mouse_right.xpm,
-	pixmaps/mouse_left.xpm: new pixmaps
-
-2001/09/05  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/diskdrake: fix function called
-
-2001/09/05  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Set default printer (all spoolers), manual
-	config (CUPS), bugfixes, clean-ups.
-
-2001/09/05  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png,
-	pixmaps/wiz_drakgw.png: new icons
-
-	* share/themes-mdk.rc: updated theme
-
-	* standalone/draknet: interface display corrected
-
-	* share/themes/mdk-button4.png, share/themes/mdk-button1.png: new buttons
-
-	* install_gtk.pm: 2 sec without sensitives buttons
-
-	* network/netconnect.pm: only if standalone
-
-	* pixmaps/network.png, pixmaps/bootloader.png, pixmaps/printer.png,
-	pixmaps/security.png, pixmaps/rootpasswd.png, pixmaps/harddrive.png,
-	pixmaps/keyboard.png, pixmaps/X.png, pixmaps/mouse.png,
-	pixmaps/bootdisk.png: new pixmaps
-
-2001/09/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed display of XFdrake test image (fcrozat).
-
-	* install_steps.pm: fixed typo preventing removable devices to be seen in
-	/etc/fstab.
-	fixed configurePrinter (used for auto_install).
-
-	* install_steps_interactive.pm: avoid asking when using existing partition
-	for magic partition with a real
-	mntpoint (typically /tmp/hdimage) if we are not using a ramdisk (so
-	partition is
-	not unmountable).
-
-	* bootloader.pm: removed yvounet sucking, handle Mandrake lilo or unknown
-	lilo.
-
-	* fs.pm: fix bad creation of /mnt/hd for an hd installation without
-	ramdisk.
-	support setting /tmp/hdimage in /etc/fstab even if memory is low (not
-	using ramdisk).
-
-	* install_any.pm: filtering $o->{printer} for g_auto_install().
-	allow installing urpmi on hd install even if low memory (so not using
-	ramdisk).
-
-	* diskdrake_interactive.pm: Do not use for loopback of magic partition
-	(/tmp/hdimage).
-
-2001/09/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/i386/busybox: hopefully fix the _ problems with busybox 0.60.1
-
-2001/09/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bs.po: updated Bosnian file
-
-	* share/po/uk.po: updated Ukrainian file
-
-2001/09/05  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: use EISA_ID in more cases to have the name
-	non-case dependent EISA comparison
-	also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
-	there, but not the [hv]syncrange
-
-	* Xconfig.pm: fix typos
-	non-case dependent EISA comparison
-	also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
-	there, but not the [hv]syncrange
-
-	* modules.pm: favor tmscsim over AM53C974
-
-	* tools/ddcprobe/ddcxinfos.c: fix for cards giving bad info
-	also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
-	there, but not the [hv]syncrange
-
-	* standalone/diskdrake: fix function called
-
-2001/09/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-(
-
-2001/09/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/eo.po, share/po/bs.po, share/po/ro.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
-	Updated Danish file; updated pot file
-
-2001/09/04  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix typo
-
-2001/09/04  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Fitted to the new Foomatic version.
-	Fixed bug of spooler change only working when language is English.
-
-2001/09/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fix bad vga= which go for some install.
-
-2001/09/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* network/netconnect.pm: small english change
-
-	* mdk-stage1/probing.c: Compaq mescouilles has changed proc stuff
-
-	* share/rpmsrate: tetex-doc
-
-	* mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-(
-
-2001/09/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
-	Updated Danish file; updated pot file
-
-	* share/po/ja.po: updated Japanese file
-
-2001/09/04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (add_alias): use "above" instead of "post-install"
-
-	* partition_table.pm: re-add JFS
-
-	* fsedit.pm, common.pm, bootloader.pm: 
-	  - don't expand symlinks in grub's menu.lst
-	  - better use of /proc/partitions verification
-
-	* detect_devices.pm (getCompaqSmartArray): add yet another location for
-	cpqarray location
-
-	* fs.pm: fix typo
-	mount ext3 as ext2 during install for speed up
-
-2001/09/04  fcrozat
-
-	* share/rpmsrate: Add plugins for KDE and Mozilla
-
-2001/09/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fix bad vga= which go for some install.
-
-	* pkgs.pm: cleanup to avoid invalid file error.
-
-2001/09/04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (add_alias): use "above" instead of "post-install"
-
-	* fs.pm: mount ext3 as ext2 during install for speed up
-
-	* partition_table.pm: re-add JFS
-
-	* fsedit.pm, common.pm, bootloader.pm: 
-	  - don't expand symlinks in grub's menu.lst
-	  - better use of /proc/partitions verification
-
-	* detect_devices.pm (getCompaqSmartArray): add yet another location for
-	cpqarray location
-
-2001/09/04  yduret
-
-	* my_gtk.pm: emebedded mode fix
-
-	* interactive_gtk.pm, diskdrake.pm: embedded mode fix
-
-2001/09/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: unfuzzy-ise a few things, translate a few things
-
-2001/09/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: updated Korean file
-
-2001/09/03  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix for lvm (non-)creation of devices
-
-2001/09/03  yduret
-
-	* my_gtk.pm, diskdrake.pm: fix Embedded mode
-
-2001/09/03  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: added timeout in resolv.conf
-
-2001/09/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: updated to use new urpmi.cfg format for install_urpmi,
-	make sure the directory
-	is not given for ftp and http install ($dir).
-
-	* Xconfigurator_consts.pm: added 1920x1440 and 2048x1536.
-
-	* Xconfig.pm: make sure a staling Mouse2 is not present unless it really
-	physically exists.
-
-2001/09/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: add axnet_cs to pcmcia category
-
-	* mdk-stage1/probing.c: change `scd' with `sr'
-
-2001/09/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/es.po: updated Spanish file
-
-	* share/po/ko.po: updated Korean file
-
-2001/09/03  Pixel  <pixel@mandrakesoft.com>
-
-	* timezone.pm (ntp_server): also set /etc/ntp/step-tickers
-
-	* fsedit.pm, devices.pm: fix mtab reading and pseudo-device use
-
-	* interactive_gtk.pm: better sizing for combo boxes
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): do not propose
-	to propose already formatted
-	fat partitions
-
-	* share/list: those files disappeared ??
-
-	* fs.pm: fix for lvm (non-)creation of devices
-	(set_default_options): created
-	fix mtab reading and pseudo-device use
-
-	* diskdrake.pm (smb_create, nfs_create): make the "New" button work
-	(raw_hd_mount_point): fix checking the same mount point
-	(try_): fix error displaying
-
-	* partition_table.pm: fix switching to 0x85 extended when
-	remove_empty_extended is called
-
-2001/09/03  yduret
-
-	* standalone/net_monitor: sync with new logdrake command line options
-
-2001/09/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bs.po: updated bosnian file
-	Added Bosnian file
-
-2001/09/01  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: avoid deleting package from %packages in install() when closing
-	fd associated,
-	if the open is called again (?), it will cause an invalid file (seems to
-	happens
-	on some invalid file).
-
-2001/08/31  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draksec: corrected yesno interpretation
-	libsafe modification
-
-	* network/netconnect.pm: corrected profil recording for modem
-
-	* standalone/net_monitor: correted typo
-
-	* network/ethernet.pm: corrected zero return when cable configuring
-
-	* any.pm: corrected autologin : no uc anymore
-
-	* network/modem.pm: added domainname2 setting
-
-	* share/logo-mandrake.png: new logo
-
-2001/08/31  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added missing AlwaysCore line for second mouse for
-	XF3.
-
-	* mouse.pm: added missing AlwaysCore line for second mouse in XF3.
-
-	* standalone.pm: add option --allow-medium-change to force asking question
-	even if --auto is
-	given on command line of urpmi, for installing package so that a dialog
-	appears.
-
-2001/08/31  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: mures is a fine game, have it at weight "4" under GAMES
-	section
-	have "numlock" in INSTALL because it's the only package which goes to
-	CD#2
-	when you unselect all groups, so having it here will allow not changing
-	CD
-	with this kind of small install
-
-2001/08/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/uk.po, share/po/es.po: updated Ukrainian
-	and Spanish files
-
-	* share/po/sv.po: updated Swedish file
-	updated Ukrainian and Spanish files
-
-2001/08/31  siegel
-
-	* share/help_sav.png: not used any more
-
-	* share/po/de.po: updates
-
-	* share/logo-mandrake2.png, share/logo-mandrake_trans.png,
-	share/logo-mandrake_sav.png, share/logo-mandrake-Desktop.png: old
-	versions => not in use any more
-
-2001/08/31  yduret
-
-	* bootlook.pm: updated code
-
-2001/08/30  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: nicer display
-
-	* standalone/draknet: added use common.pm (can be usefull, eh?)
-
-	* network/network.pm: silently /sbin/ip
-	track_network_id only if laptop
-
-2001/08/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: Updated Danishfile
-	updated pot file (I had lost the group descriptions, sorry, they are
-	back now)
-	moved chinese files to charset independent names
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file (I
-	had lost the group descriptions, sorry, they are back now)
-	moved chinese files to charset independent names
-
-2001/08/30  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (read): it works now
-
-	* help.pm: fixed (was utf8)
-
-	* install_steps_gtk.pm (new): call interactive_gtk::new
-
-	* install_steps.pm, Xconfigurator.pm: disable gpm (in case of serial
-	mouse) before service choice
-
-	* pkgs.pm (naughtyServers): update for 8.1
-
-2001/08/30  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm: corrected icon display
-
-	* my_gtk.pm: new wizard
-
-	* interactive_gtk.pm: corrected wizard mode display height/width
-
-	* standalone/draknet: added draknet client installation
-
-	* network/network.pm: track_network_id only if laptop
-	dhcp package installation
-
-	* pixmaps/wiz_default_left.png: new logo
-
-2001/08/30  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mouse.pm: make sure to update all symlink according to any mouse (max 2)
-	probed.
-	fix previous fixes on mouse::write_conf
-
-	* standalone/mousedrake: fix previous fix (typo).
-	keep mouse specific paramater if user does not change its mouse.
-	make sure --auto is not interactive on some part.
-	use default value for port device if a serial mouse.
-
-	* printer.pm: fixed foomatic failed (no lo up since ifup lo don't run)
-
-	* Makefile: ugly to make sure standalone/pixmaps is not here when building
-	tar-drakxtools.
-
-	* Xconfig.pm: when reading existing configuration for mouse, update
-	type|name for second mouse too.
-	make sure default to set 3 for nbuttons for getinfoFromXF86Config for
-	second
-	mouse if this mouse has 3 buttons.
-
-	* Xconfigurator.pm: for single heads mode, no screen id should be set in
-	file (or XFree is going
-	mad, but he is right, no ?)
-
-	* install_any.pm: if a medium is refused, get rid of it definitively until
-	it is accepted again.
-
-2001/08/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: have a wait_message during installation of
-	bootloader
-
-	* mdk-stage1/pcmcia/pcmcia_probe.c: import new PCI ID's for more PCMCIA
-	Controllers, from probe.c-1.54 of pcmcia-cs-3.1.28
-
-2001/08/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po, share/po/vi.po, share/po/es.po: updated Japanese,
-	Spanish and Vietnamese files
-
-2001/08/30  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: allow LVM on RAID
-
-	* help.pm: fixed (was utf8)
-
-	* any.pm: cleanup
-
-	* pkgs.pm (naughtyServers): update for 8.1
-
-	* lang.pm (read): it works now
-
-	* fs.pm (set_default_options): "ro" for cdroms, "user" for vfat only if
-	removable
-	media
-
-	* share/po/Makefile: fix utf8 translation of xml file
-
-	* interactive_gtk.pm: fix&cleanup window size
-
-	* tools/Makefile: cleanup unneeded stuff
-
-2001/08/30  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/30  warly
-
-	* share/rpmsrate: add koffice-i18n diald vlan-utils
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, standalone/drakautoinst: quit_global
-
-	* share/po/fr.po: minor fix
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix language selection
-
-	* c.pm: better error message when function c::foo() is missing
-
-	* rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev
-	in /)
-
-2001/08/29  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed if undef encountered in depslist when installing package
-	(traversing
-	depslist as $depOrder).
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, standalone/drakautoinst: quit_global
-
-	* share/po/fr.po: minor fix
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix language selection
-
-	* c.pm: better error message when function c::foo() is missing
-
-	* install_steps_gtk.pm (installPackages): have Ok button by default for
-	asking for changing CD
-
-	* bootloader.pm (mkbootdisk): cleanup
-
-	* rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev
-	in /)
-
-	* devices.pm: remove fd0H1440 and fd1H1440
-
-	* modules.pm: remove "msdos"
-
-2001/08/29  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mouse.pm: improved write_conf to enable multi-mice if only once mice is
-	already defined.
-
-	* standalone/mousedrake: try to merge already existing mouse configuration
-	with what has been probed,
-	change if mouse is really changed as probe is incomplete.
-
-	* Xconfig.pm: improve getinfoFromXF86Config for mouse parameters.
-
-	* pkgs.pm: fixed if undef encountered in depslist when installing package
-	(traversing
-	depslist as $depOrder).
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, standalone/drakautoinst: quit_global
-
-	* share/po/fr.po: minor fix
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* c.pm: better error message when function c::foo() is missing
-
-	* keyboard.pm (loadkeys_files): fixed
-
-	* install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm,
-	Makefile.config: add localedrake (not tested)
-
-	* rescue/make_rescue_img: make it work (do not have the dev in /)
-	cleanup, speedup, use mknod for devices
-
-	* install_steps_gtk.pm (installPackages): have Ok button by default for
-	asking for changing CD
-
-	* rescue/devices.pl, rescue/list: cleanup, speedup, use mknod for devices
-
-	* bootloader.pm (mkbootdisk): cleanup
-
-	* rescue/dirs: make it work (do not have the dev in /)
-
-	* devices.pm: remove fd0H1440 and fd1H1440
-
-	* modules.pm: remove "msdos"
-
-2001/08/29  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm, share/rpmsrate: speedtouch
-	configuration
-
-2001/08/29  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mouse.pm: improved write_conf to enable multi-mice if only once mice is
-	already defined.
-
-	* install_steps.pm: add support for mandatory frame buffer support (SiS
-	630) need them for XF3 to
-	work properly, XF4 does work with it nicely.
-
-	* Xconfigurator.pm: make sure Port entry for wacom is placed first.
-
-	* standalone/mousedrake: try to merge already existing mouse configuration
-	with what has been probed,
-	change if mouse is really changed as probe is incomplete.
-
-	* Xconfig.pm: improve getinfoFromXF86Config for mouse parameters.
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: games
-
-2001/08/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po, share/po/DrakX.pot, share/po/es.po: updated Danish file
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, install_any.pm, fsedit.pm, diskdrake.pm: try to better handle
-	symlinks device and devfs devices
-
-	* install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm,
-	Makefile.config: add localedrake (not tested)
-
-	* install_steps.pm: no need to have devfs=nomount anymore in root raid
-	do not modify fstab options in upgrade
-
-	* keyboard.pm (loadkeys_files): fixed
-	fix DISABLE_WINDOWS_KEY state handling (for upgrade), cleanup
-
-	* diskdrake_interactive.pm: try to better handle symlinks device and devfs
-	devices
-	(main): fix
-	(Create): fix typo causing primaryOrExtended to be ignored
-
-	* rescue/devices.pl, rescue/make_rescue_img, rescue/list: cleanup,
-	speedup, use mknod for devices
-
-	* c/stuff.xs.pm, detect_devices.pm: better floppy detection/info
-
-2001/08/28  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm, install2.pm: corrected icon handling
-
-	* services.pm: added cupslpd in printing section
-
-2001/08/28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Makefile.config: really fix typo...
-	fixed typo.
-
-2001/08/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: updated Czech file
-
-2001/08/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove the temporary file /tmp/autoinst.img
-
-	* install_steps.pm, install_steps_interactive.pm: propose to format / and
-	/usr even if isFormatted. More generally do not trust isFormatted to
-	show which partitions to format
-
-2001/08/28  siegel
-
-	* ChangeLog, keyboard.pm: 
-	  - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
-	if no laptop is detected (= give users the chance to know about the
-	existence of this variable).
-
-2001/08/28  yduret
-
-	* standalone/diskdrake: embedded mode nicer
-
-2001/08/28  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm, install2.pm: corrected icon handling
-
-2001/08/28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/list: added /sbin/e2fsck
-
-	* share/aliases: added fsck.ext2 -> e2fsck (now in list file)
-	removed e2fsck.shared as e2fsprogs now provide a shared version instead
-	of a
-	static one.
-
-	* Makefile.config: really fix typo...
-	fixed typo.
-	removed reference to e2fsck.shared (now use e2fsck from package which is
-	shared
-	since 1.23-2mdk).
-
-2001/08/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove the temporary file /tmp/autoinst.img
-
-2001/08/28  siegel
-
-	* ChangeLog, keyboard.pm: 
-	  - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
-	if no laptop is detected (= give users the chance to know about the
-	existence of this variable).
-
-2001/08/28  yduret
-
-	* standalone/diskdrake: embedded mode nicer
-
-2001/08/28  Stefan Siegel  <siegel@mandrakesoft.com>
-
-	* keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard 
-	if no laptop is detected (= give users the chance to know about
-	the existence of this variable).
-
-2001/08/28  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: typo
-
-2001/08/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: default the licence agreement to "Refuse"
-
-	* standalone/drakboot: security fix and various
-	move to all_hds stuff
-
-	* c/stuff.xs.pm, bootloader.pm: security fix and various
-
-2001/08/28  warly
-
-	* share/rpmsrate: move libsafe to SERVER_OTHER 2
-	added prelude, libsafe...
-
-2001/08/28  yduret
-
-	* standalone/drakxconf: readded dsikdrake
-	added new items, remove some old ones
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: corrected hwaddr setting and draknet first window
-	display
-	corrected typo
-
-	* network/netconnect.pm: corrected hwaddr setting and draknet first window
-	display
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: corrected hwaddr setting and draknet first window
-	display
-	corrected typo
-
-	* network/netconnect.pm: corrected hwaddr setting and draknet first window
-	display
-
-2001/08/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sk.po, share/po/eu.po: updated Basque and slovak files
-
-2001/08/27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: nicer help display
-
-	* share/keyboards.tar.bz2: fix the rights
-
-	* c/stuff.xs.pm (setlocale): do not set LC_NUMERIC
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: corrected bad window size
-
-	* network/network.pm: make it compile
-	corrected hwaddr stuff
-	added HWADDR
-
-	* network/tools.pm: corrected internet initscript
-
-	* any.pm, mouse.pm: make it compile
-	add_devfslink
-
-2001/08/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list.
-	Added Latvian keyboard
-
-	* share/keyboards.tar.bz2: Checked and updated xmodmap files for DrakX
-
-	* share/po/sk.po, share/po/eu.po: updated Basque and slovak files
-
-2001/08/27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: nicer help display
-
-	* diskdrake.pm: use empty hash instead of the raid/loopback array
-
-	* c/stuff.xs.pm (setlocale): do not set LC_NUMERIC
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: corrected bad window size
-
-	* network/network.pm: added HWADDR
-
-	* network/tools.pm: corrected internet initscript
-
-2001/08/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm, standalone/draknet, network/modem.pm: added Borsenkow Andrej
-	patch to support CHAP again.
-
-2001/08/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list.
-	Added Latvian keyboard
-
-2001/08/27  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: use empty hash instead of the raid/loopback array
-
-2001/08/26  warly
-
-	* share/rpmsrate: add some important packages
-
-2001/08/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakautoinst: require -> use
-
-	* install_any.pm: save the .img file so that multi-cd install won't ask to
-	re-enter first cd
-
-2001/08/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/26  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile, share/po/.cvsignore: fetch directly the latest
-	drakx-help.xml
-
-2001/08/25  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakbug_report: add "rpm -qa"
-
-	* bootlook.pm: fix deprecated call standalone::pkgs_install
-
-	* diskdrake.pm: don't the grab flag propagate everywhere
-
-2001/08/25  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm, steps.pm: icon correction
-
-2001/08/25  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount): accept mounting iso9660 filesystem as it should be
-	(write_fstab): enable mounting more than one swap :)
-
-	* bootlook.pm: fix deprecated call standalone::pkgs_install
-
-	* install_steps.pm: added the missing security parameter to
-	set_default_options
-
-	* diskdrake.pm: don't the grab flag propagate everywhere
-
-2001/08/24  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/mouse_3b_mini.xpm, pixmaps/mouse_3b+.xpm, pixmaps/mouse_3b.xpm,
-	pixmaps/mouse_3b+_mini.xpm: mini pixmaps, and lower color res for normal
-	pix
-
-	* standalone/mousedrake: updated mouse test
-
-2001/08/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the
-	uncompressing of ramdisk will rulz now
-
-	* mdk-stage1/network.c: allow unsetting of automatic mode if not enough
-	parameter provided in network steps
-
-	* mdk-stage1/probing.c: 
-	  - descr of proc files
-	  - fix small typo (segfault or not segfault? that's the question)
-	enable install from Compaq Smart Array
-
-	* mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather
-	than gcc statically
-
-	* mdk-stage1/tools.c, mdk-stage1/mount.c: enable install from Compaq Smart
-	Array
-
-2001/08/24  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/pcmcia_config.patch: update the patch
-
-	* Makefile (test_pms): make perl_checker skip help.pm
-	ensure no .orig are generated when the pcmcia patch is applied
-
-	* tools/make_mdkinst_stage2: give a little more free space (esp. for
-	russian lang)
-
-	* lang.pm, share/gen_locales.sh: no need for UTF-8/LC_CTYPE
-
-	* share/po/help_xml2pm.pl, share/po/Makefile, help.pm: auto-generates
-	help.pm from xml doc done by doc team
-
-2001/08/24  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm: bugfix, speedtouch help
-
-	* standalone/mousedrake: updated mouse test
-
-2001/08/24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fixed possible bug (not sorted partition when calling
-	mount_part).
-
-	* install_any.pm: fixed hdInstallPath for an hd installation without
-	usingRamdisk (not installing
-	urpmi in such case).
-	updated packages to copy for printerdrake, removed almost obsoletes
-	XFree86
-	3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16,
-	3DLabs)
-	which means user will have to change CD back to CD#1 if he a such a
-	card.
-	removed obsolete code for cond_remount and cond_umount and update
-	hdInstallPath
-	for hd installation.
-
-	* diskdrake_interactive.pm: fixed typo common::usingRamdisk() instead of
-	common::useRamdisk().
-	take care mount point action is available for the hd installation
-	partition only
-	if a ramdisk is used (as it can be unmounted).
-	use more global isMagicPart instead of isInstallHdPart.
-	added real_mntpoint documentation and take care of hd install partition
-	for
-	available actions.
-
-	* fs.pm: take care of using ram disk to remap mntpoint of hd installation
-	partition.
-	fixed partition never seen as mounted, added special case for
-	real_mntpoint to
-	remount magic partition on the right place.
-
-2001/08/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the
-	uncompressing of ramdisk will rulz now
-
-	* mdk-stage1/automatic.c: revert my auto->interactive patch
-
-	* mdk-stage1/network.c: allow unsetting of automatic mode if not enough
-	parameter provided in network steps
-
-	* mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather
-	than gcc statically
-
-	* mdk-stage1/tools.c, mdk-stage1/mount.c, mdk-stage1/probing.c: enable
-	install from Compaq Smart Array
-
-2001/08/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/locales-skeleton.tar.bz2, share/fonts.tar.bz2, keyboard.pm:
-	enabling euro and utf-8 for some languages; added unicode font
-
-2001/08/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-
-	* tools/pcmcia_config.patch: update the patch
-
-	* lang.pm: no need for UTF-8/LC_CTYPE
-	(load_mo): if not usingRamdisk, don't try getFile
-
-	* diskdrake_interactive.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-	(Done): do not write fstab nor ask about it in install
-
-	* fs.pm (mount): allow to mount 'proc' and 'usbdevfs'
-
-	* Makefile: ensure no .orig are generated when the pcmcia patch is applied
-
-	* partition_table.pm (write): do not die when real_mntpoint fs fail to
-	unmount/remount, just log
-	(write): unmount+remount real_mntpoint before doing the kernel_read
-
-	* share/gen_locales.sh: no need for UTF-8/LC_CTYPE
-
-	* pkgs.pm: fix "invalid file"
-
-2001/08/24  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: speedtouch configuration
-
-	* my_gtk.pm: gtk_create_xpm handles no absolute xpm path
-
-	* pixmaps/mouse_3b+.xpm, pixmaps/mouse_middle.xpm, pixmaps/mouse_3b.xpm:
-	added new mouse pixmap for mousedrake
-
-	* network/adsl.pm: bugfix, speedtouch help
-	added aliases for speedtouch stuff
-	speedtouch configuration
-	removed adsl detectioin, once again.
-
-	* standalone/mousedrake: no absolute pixmap reference
-	new mousedrake. experimental
-
-	* network/tools.pm: speedtouch configuration
-	export write_initscript, correct initscript.
-
-2001/08/24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fixed possible bug (not sorted partition when calling
-	mount_part).
-
-	* diskdrake_interactive.pm: take care mount point action is available for
-	the hd installation partition only
-	if a ramdisk is used (as it can be unmounted).
-	use more global isMagicPart instead of isInstallHdPart.
-	added real_mntpoint documentation and take care of hd install partition
-	for
-	available actions.
-
-	* install_any.pm: fixed hdInstallPath for an hd installation without
-	usingRamdisk (not installing
-	urpmi in such case).
-	updated packages to copy for printerdrake, removed almost obsoletes
-	XFree86
-	3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16,
-	3DLabs)
-	which means user will have to change CD back to CD#1 if he a such a
-	card.
-	removed obsolete code for cond_remount and cond_umount and update
-	hdInstallPath
-	for hd installation.
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2,
-	mdk-stage1/init-data/msgboot.img.bz2: updated with latest 8.1 pictures
-	and updated documentation.
-
-	* fs.pm: take care of using ram disk to remap mntpoint of hd installation
-	partition.
-	fixed partition never seen as mounted, added special case for
-	real_mntpoint to
-	remount magic partition on the right place.
-
-2001/08/24  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (write): do not die when real_mntpoint fs fail to
-	unmount/remount, just log
-	(write): unmount+remount real_mntpoint before doing the kernel_read
-
-	* install_steps.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-
-	* diskdrake_interactive.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-	(Done): do not write fstab nor ask about it in install
-
-	* lang.pm (load_mo): if not usingRamdisk, don't try getFile
-
-	* fs.pm (mount): allow to mount 'proc' and 'usbdevfs'
-
-2001/08/24  siegel
-
-	* share/po/de.po: New & shiny german version
-
-2001/08/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-	* share/po/el.po: updated Greek file
-
-2001/08/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/08/23  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: at_boot connection,resolvconf in profiles
-
-	* standalone/draksec: addedlibsafe option
-
-	* network/adsl.pm: restart network after having tested adsl. experimental
-
-2001/08/23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: removed unusefull greping when building package
-	tree.
-
-2001/08/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: work on GAMES section
-
-2001/08/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/lv.po: updated Latvian file
-
-2001/08/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (cond_umount_hdimage): do not unmount /tmp/hdimage if not
-	using ramdisk
-	(disable_user_view): damned kdmrc moved
-
-	* diskdrake_interactive.pm: cancel at startup will now exit
-	ask wether to save fstab
-	(part_possible_actions): have "Mount point" first to please fpons
-
-	* fs.pm: keep the freq&passno of /etc/fstab
-
-	* tools/i386/netboot/menu.lst.example,
-	tools/i386/netboot/make_boot_network,
-	tools/i386/netboot/automatic.para.default: as we now have
-	menu.lst.example, i remove automatic.para for more flexibility
-
-	* lang.pm: fix locale support when usingRamdisk
-
-2001/08/22  anoncvs
-
-	* share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming
-	<dxiaoming@mandrakesoft.com>
-	Updated chinese (simplied) translation.
-
-2001/08/22  Pixel  <pixel@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R
-
-	* network/nfs.pm: pleac perl_checker
-
-	* interactive_gtk.pm: more intelligent setting back the selected value in
-	the clist and ctree
-	(done already for entry)
-	  - fix entries editing causing the cursor to go to the end of line
-	  - select the text
-
-	* c/stuff.xs.pm, install_steps.pm, pkgs.pm: do init_db inside pkg_inside
-	otherwise LOG is closed and rpmlib tries to write in it and ...
-
-2001/08/22  anoncvs
-
-	* share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming
-	<dxiaoming@mandrakesoft.com>
-	Updated chinese (simplied) translation.
-
-2001/08/22  fabman
-
-	* share/po/es.po: updated spanish .po files for DrakX and drakbootdisk
-
-2001/08/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when
-	entries are not given
-
-	* mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c,
-	mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h,
-	mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all
-	but ramdisk Read Only
-
-2001/08/22  Pixel  <pixel@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R
-
-	* bootlook.pm: fix typo
-
-	* network/nfs.pm: pleac perl_checker
-
-	* install_steps.pm: do init_db inside pkg_inside otherwise LOG is closed
-	and rpmlib tries to write in it and ...
-	do not call configurePrinter if no printer is wanted
-
-	* interactive_gtk.pm: more intelligent setting back the selected value in
-	the clist and ctree
-	(done already for entry)
-	  - fix entries editing causing the cursor to go to the end of line
-	  - select the text
-
-	* c/stuff.xs.pm, pkgs.pm: do init_db inside pkg_inside otherwise LOG is
-	closed and rpmlib tries to write in it and ...
-
-2001/08/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: fixed int and float checking which should accept
-	negative number (added explicit
-	positive too), cleaned code for some perl idioms.
-
-	* install_steps.pm: updated configurePrinter to use foomatic printer
-	configuration.
-
-2001/08/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when
-	entries are not given
-
-	* mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c,
-	mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h,
-	mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all
-	but ramdisk Read Only
-
-2001/08/22  kjx
-
-	* share/po/zh_CN.GB2312.po: review
-	review
-
-2001/08/22  Pixel  <pixel@mandrakesoft.com>
-
-	* bootlook.pm: fix typo
-
-	* install_steps_auto_install.pm: don't have formatPartitions interactive
-	by default
-
-	* install_steps.pm: do not call configurePrinter if no printer is wanted
-
-2001/08/22  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/21  dam's  <damien@mandrakesoft.com>
-
-	* Makefile: added rpcinfo to the tar
-	corrected bad Makefile : rpcinfo-flushed.c comes from tools.
-
-	* standalone/draknet: ergonomy correction
-
-	* network/tools.pm: corrected qq bug
-	corrected bug
-
-	* standalone/net_monitor: log updatede
-	removed memoty leak
-	time connection label
-
-2001/08/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: moved installation code of foomatic (only)
-	if a printer may be chosen.
-
-	* install_any.pm: fixed hd installation for urpmi.
-
-	* printerdrake.pm: slight rewrite of some perl idioms.
-
-2001/08/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po: updated Walloon file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2001/08/21  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add telnet-client-krb5 and ftp-client-krb5
-
-	* install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd
-	install
-
-	* Makefile, share/po/Makefile: check presence of '$' in DrakX.pot
-
-	* fs.pm (read_fstab): don't expand symlink if the link goes in a directory
-
-	* install_any.pm: cleanup
-
-	* install_steps_interactive.pm: fix '$' in i18n message
-
-2001/08/21  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/21  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: removed memoty leak
-	time connection label
-
-	* network/tools.pm, network/modem.pm, network/netconnect.pm,
-	network/ethernet.pm, network/isdn.pm: generik internet initscript, planq
-	the children again
-
-	* network/adsl.pm: speedtouch config
-	generik internet initscript, planq the children again
-
-2001/08/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed hd installation for urpmi.
-
-2001/08/21  kjx
-
-	* share/po/zh_CN.GB2312.po: review
-
-2001/08/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/21  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix spelling error
-
-	* install_any.pm: cleanup
-	install hotplug if usb (i kept usbd just in case)
-
-	* diskdrake_interactive.pm (Create): force no sorting on filesystems,
-	editable mount points
-
-	* install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd
-	install
-
-	* Makefile, share/po/Makefile: check presence of '$' in DrakX.pot
-
-	* install_steps_interactive.pm: fix '$' in i18n message
-
-	* fs.pm (read_fstab): don't expand symlink if the link goes in a directory
-	umask=0 only if security level < 3
-
-2001/08/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers: Have NETWORKING_DNS in "Internet station" (was
-	nowhere)
-
-2001/08/20  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: basic nfs handling in drakx
-	fix bug 4257
-
-	* detect_devices.pm (raidAutoStart): fix for when kmod is there
-
-	* fsedit.pm: try a stronger matching technique for parsing /proc/mdstat
-	with devfs
-
-	* diskdrake_interactive.pm, install_any.pm, install_steps.pm: try harder
-	to umount /tmp/hdimage only when needed
-
-	* Makefile.drakxtools, Makefile, tools/rpcinfo-flushed.c, network/nfs.pm,
-	tools/.cvsignore, tools/Makefile, diskdrake.pm: basic nfs handling in
-	drakx
-
-2001/08/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers: Have NETWORKING_DNS in "Internet station" (was
-	nowhere)
-
-2001/08/20  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: add weird options for NeoMagic NM2160 (request
-	of Alex Hulse <axh0@aber.ac.uk> on cooker)
-
-	* detect_devices.pm (raidAutoStart): fix for when kmod is there
-
-	* diskdrake.pm: remove test code
-
-	* fs.pm: fix bug 4257
-
-	* fsedit.pm: try a stronger matching technique for parsing /proc/mdstat
-	with devfs
-
-	* install_steps.pm, diskdrake_interactive.pm, install_any.pm: try harder
-	to umount /tmp/hdimage only when needed
-
-	* interactive_gtk.pm (wait_message_nextW): fix previous text == new text
-	causing no
-	expose_event causing dead loop
-
-2001/08/19  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: save fstab on exit
-
-	* fsedit.pm: various typos fix
-
-	* install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	make the devfs= mount or nomount choice based on raid-based root work
-
-	* standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	fix diskdrake requiring gtk
-	add some test code
-
-	* fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are
-	removed unless we're in ramdisk
-	various typos fix
-
-	* install_steps_interactive.pm, common.pm, install2.pm, install_any.pm,
-	lang.pm, pkgs.pm: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-
-2001/08/19  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: major fs.pm rework + adaptation to it
-	don't show nfs/smb/removable in install
-	basic smb handling
-
-	* network/smb.pm: basic smb handling
-
-	* install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	make the devfs= mount or nomount choice based on raid-based root work
-	disable supermount for the moment
-	major fs.pm rework + adaptation to it
-
-	* install_steps_interactive.pm, lang.pm: rename isCdNotEjectable in
-	usingRamdisk, ensure no files are removed unless we're in ramdisk
-	simplify
-
-	* standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	fix diskdrake requiring gtk
-	add some test code
-	major fs.pm rework + adaptation to it
-
-	* install_any.pm: rename isCdNotEjectable in usingRamdisk, ensure no files
-	are removed unless we're in ramdisk
-	major fs.pm rework + adaptation to it
-
-	* partition_table.pm: remove JFS from @important_types (too broken for the
-	moment)
-	remove isSupermount (was unused)
-
-	* common.pm, install2.pm, pkgs.pm: rename isCdNotEjectable in
-	usingRamdisk, ensure no files are removed unless we're in ramdisk
-
-	* interactive_gtk.pm (create_ctree): fix focusing (the assumption number
-	of leaves = number of lines is dumb)
-
-	* fsedit.pm: various typos fix
-	major fs.pm rework + adaptation to it
-
-	* bootlook.pm, standalone/drakboot: major fs.pm rework + adaptation to it
-
-	* fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are
-	removed unless we're in ramdisk
-	various typos fix
-	major fs.pm rework + adaptation to it
-	cleanup
-	basic smb handling
-
-	* diskdrake_interactive.pm: save fstab on exit
-	major fs.pm rework + adaptation to it
-
-2001/08/18  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: basic nfs/smb handling in diskdrake
-	fixes and function prototype removing
-
-	* diskdrake.pm: basic nfs/smb handling in diskdrake
-	nicer mount options code (for autofs and supermount)
-
-	* install_steps.pm: oops, i inverted devfs=nomount and devfs=mount
-
-	* interactive_gtk.pm: fix bug in box's height use
-
-	* partition_table.pm, any.pm: fixes and function prototype removing
-
-	* interactive.pm: readd the sorting based on size when no sorting is
-	precised
-
-	* my_gtk.pm (n_line_size): bigger spacing for 'various'
-
-	* standalone/diskdrake, diskdrake_interactive.pm, fsedit.pm: basic nfs/smb
-	handling in diskdrake
-
-2001/08/18  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm (n_line_size): bigger spacing for 'various'
-	enhance look, fix ask_fileW
-
-	* fs.pm: basic nfs/smb handling in diskdrake
-	fixes and function prototype removing
-	(write_fstab): add notail for reiserfs partitions in any case
-	cleanup mounting options parsing
-
-	* diskdrake.pm: basic nfs/smb handling in diskdrake
-	nicer mount options code (for autofs and supermount)
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-	cleanup mounting options parsing
-
-	* raid.pm: update the raid size as it should be
-
-	* diskdrake_interactive.pm: basic nfs/smb handling in diskdrake
-	less verbose resize_reiserfs
-	update the raid size as it should be
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* fsedit.pm: basic nfs/smb handling in diskdrake
-	update the raid size as it should be
-
-	* network/tools.pm: fix typo
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* partition_table.pm: fixes and function prototype removing
-
-	* install_steps_interactive.pm, standalone/drakautoinst, proxy.pm,
-	install_interactive.pm, network/ethernet.pm, interactive_http.pm,
-	printerdrake.pm, Xconfigurator.pm, network/netconnect.pm,
-	network/network.pm, interactive_newt.pm, network/modem.pm: big renaming
-	of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered
-	in ask_from_
-
-	* standalone/diskdrake: basic nfs/smb handling in diskdrake
-
-	* any.pm: fixes and function prototype removing
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* interactive_gtk.pm: fix bug in box's height use
-	better radiobox keyboard handling
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-	enhance look, fix ask_fileW
-
-	* interactive.pm: readd the sorting based on size when no sorting is
-	precised
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* install_steps.pm: oops, i inverted devfs=nomount and devfs=mount
-	do not use devfs with root software raid
-
-2001/08/18  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix pass $all_hds->{hds} instead of
-	$all_hds
-
-2001/08/18  siegel
-
-	* share/po/de.po: new german version
-
-	* standalone/drakgw, bootlook.pm, network/ethernet.pm, install_any.pm,
-	network/network.pm, raid.pm: fixed i18n
-
-	* printerdrake.pm: i18n fixes
-
-2001/08/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm: use diskdrake_interactive instead of diskdrake
-
-	* standalone/interactive_http/interactive_http.cgi: fix typo
-	restrict the progs callable to a few one.
-
-	* standalone/interactive_http/index.html.pl,
-	standalone/interactive_http/index.html: autogenerate index.html
-
-	* fs.pm, diskdrake_interactive.pm, diskdrake.pm: add mount options choice
-	(with IA-like stripping of unused options)
-
-	* c/stuff.xs.pm: is_ext3 is needed in standalone
-	Xtest not needed in standalone
-
-	* c/Makefile.PL: is_ext3 is needed in standalone
-
-	* standalone/interactive_http/miniserv.init,
-	standalone/interactive_http/Makefile: restrict the progs callable to a
-	few one.
-
-	* Makefile.drakxtools: fix po not build, add interactive_http in DIRS
-
-	* modules.pm: move back sunhme in sparc only
-
-2001/08/17  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: no scrollbar if list <= 10 and the list is alone
-
-	* interactive.pm, install2.pm: removed no_incon
-
-	* standalone/net_monitor: added no internet connection configured label on
-	button
-
-	* network/netconnect.pm, network/ethernet.pm: corrected connection script
-	creation
-
-2001/08/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm: use diskdrake_interactive instead of diskdrake
-	a hell lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* fs.pm, diskdrake.pm: add mount options choice (with IA-like stripping of
-	unused options)
-	a hell lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* install_steps_interactive.pm, install_steps_auto_install.pm,
-	install2.pm, partition_table.pm, loopback.pm, raid.pm, bootlook.pm,
-	standalone/diskdrake, install_any.pm, install_steps.pm, fsedit.pm,
-	any.pm, detect_devices.pm, partition_table_raw.pm, bootloader.pm: a hell
-	lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* diskdrake_interactive.pm: add mount options choice (with IA-like
-	stripping of unused options)
-	(part_possible_actions): have possible actions sorted the way we want
-	(Type): fix ext2->ext3 detection
-	a hell lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* modules.pm: move back sunhme in sparc only
-
-2001/08/17  Till Kamppeter <till@mandrakesoft.com>
-
-	* share/rpmsrate: Corrected listing of packages for printing in 'INSTALL'
-	section.
-
-2001/08/17  warly
-
-	* share/rpmsrate: add package needed by the install in INSTALL
-	remove shapecfg and gpa
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed bug of CUPS not being installed during
-	installation
-
-2001/08/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm, install_any.pm: add remove_unused to have more place for mo
-	files
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed bug of CUPS not being installed during
-	installation
-
-2001/08/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: add remove_unused to have more place for mo files
-	(getAndSaveAutoInstallFloppy): fix a missing del_loop which caused the
-	unmounting at end of install to fail
-
-	* install2.pm: add remove_unused to have more place for mo files
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed setup dialog for the "postpipe" connection type
-
-2001/08/16  warly
-
-	* share/rpmsrate: add package needed by the install in INSTALL
-
-2001/08/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po: updated French file
-
-	* share/po/sk.po: updated Slovak file
-
-	* lang.pm: Added explicit setting of XFree86 internal XIM for Thai
-
-2001/08/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): fix a missing del_loop
-	which caused the
-	unmounting at end of install to fail
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed setup dialog for the "postpipe" connection type
-
-2001/08/16  warly
-
-	* share/rpmsrate: add package needed by the install in INSTALL
-	add kernel in INSTALL
-	s/DrakConf/drakconf/
-
-2001/08/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/it.po, share/po/id.po: updated Indonesian,
-	Italian and Korean files
-
-	* share/po/sr.po, share/po/sp.po, share/po/tr.po: updated Turkish and
-	Serbian files
-
-2001/08/15  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/diskdrake: oops reverting modifs commited by error
-	fix XkbOptions handling
-
-	* standalone/keyboarddrake: fix XkbOptions handling
-
-2001/08/15  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Let the "Options" button only appear when
-	the queue is Foomatic or with PPD (CUPS)
-
-2001/08/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/it.po: updated Indonesian, Italian and Korean
-	files
-
-	* share/po/es.po: updated spanish and Indonesian files
-
-	* share/po/id.po: updated Indonesian, Italian and Korean files
-	updated spanish and Indonesian files
-
-2001/08/14  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: added options
-
-2001/08/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: oops, fix type of installing X or not
-	  - fix choice of packages when auto install
-
-	* Makefile.config: add drakautoinst in drakxtools standalone binaries
-
-	* install_steps_interactive.pm, install2.pm: 
-	  - fix createBootdisk with auto
-	  - fix setupBootloader with auto
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* install_steps.pm, network/netconnect.pm: 
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* Xconfigurator.pm: fix automatic configuration
-
-2001/08/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-2001/08/14  Pixel  <pixel@mandrakesoft.com>
-
-	* devices.pm: add number-only device-name handling (eg: "801" is "sda1")
-
-	* interactive_gtk.pm, interactive.pm: 
-	  - small fixes (esp. gtk sensitive handling)
-	  - add ask_file
-	  - add "gtk" preference field
-
-	* my_gtk.pm: remove ask_file (was unused)
-
-	* http.pm: cleanup to please perl_checker
-
-	* Makefile (TAGS): add MDK/Common files
-
-	* services.pm: cleanup (it was working, but wasn't nice)
-
-2001/08/14  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected activation button
-
-2001/08/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: oops, fix type of installing X or not
-	  - fix choice of packages when auto install
-
-	* Makefile.config: add drakautoinst in drakxtools standalone binaries
-
-	* install_steps_interactive.pm, install2.pm: 
-	  - fix createBootdisk with auto
-	  - fix setupBootloader with auto
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* install_steps.pm, network/netconnect.pm: 
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* Xconfigurator.pm: fix automatic configuration
-
-2001/08/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-2001/08/14  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix typo?
-
-2001/08/14  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Transfer queues non-interactively when switching
-	between LPD and LPRng.
-
-2001/08/14  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected activation button
-
-2001/08/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, install2.pm,
-	network/netconnect.pm: 
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* Xconfigurator.pm: fix automatic configuration
-
-	* install_any.pm: 
-	  - fix choice of packages when auto install
-
-2001/08/14  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix typo?
-
-2001/08/14  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Removed superfluous lines.
-
-	* printerdrake.pm: Transfer queues non-interactively when switching
-	between LPD and LPRng.
-	Wait message for queue transfer, manufacturer name bugfix
-
-2001/08/13  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* tools/i386/netboot/stage2.eepro100: Add eepro100 grub stage.
-	Removing old version of eepro100 (no stage1).
-
-	* tools/i386/netboot/stage1.eepro100: Add eepro100 grub stage.
-
-2001/08/13  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm: corrected 'no icon'
-
-	* network/adsl.pm, network/netconnect.pm: adsl autodetection activated
-	(planq the children)
-
-2001/08/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakautoinst: ouch! use lib from /usr/lib/libDrakX, rather
-	than from ..
-	initial revision for drakautoinst
-	  - put %installSteps in a separate package (steps.pm) (for drakxtools)
-	  - use additional fields {auto} and {noauto}, by step, to ease
-	interactive auto install and oem stuff
-	  - in install2.pm, perform each step either from the interactive class
-	or from install_steps, according to the {auto} flag
-	  - id, tell each step to not try to be automatic if {noauto}
-	  - in the install, have auto install bootdisk created in install_any so
-	we can always write a bootdisk (from install_steps) for further use from
-	drakautoinst in standalone
-	  - interactive version of install_steps_auto_install is now inheriting
-	from the interactive class, so we can click on a previous automatic step
-	and have it interactively during an interactive auto install
-
-	* install_steps.pm, install_steps_interactive.pm,
-	install_steps_auto_install.pm, install2.pm, steps.pm, install_any.pm:
-	initial revision for drakautoinst
-	  - put %installSteps in a separate package (steps.pm) (for drakxtools)
-	  - use additional fields {auto} and {noauto}, by step, to ease
-	interactive auto install and oem stuff
-	  - in install2.pm, perform each step either from the interactive class
-	or from install_steps, according to the {auto} flag
-	  - id, tell each step to not try to be automatic if {noauto}
-	  - in the install, have auto install bootdisk created in install_any so
-	we can always write a bootdisk (from install_steps) for further use from
-	drakautoinst in standalone
-	  - interactive version of install_steps_auto_install is now inheriting
-	from the interactive class, so we can click on a previous automatic step
-	and have it interactively during an interactive auto install
-
-2001/08/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm, install2.pm, install_any.pm, steps.pm:
-	auto_inst enhancements
-
-	* install_steps_interactive.pm, standalone/XFdrake, install_steps.pm,
-	Xconfigurator.pm: really use a class_discard for Xconfigurator::main
-
-	* devices.pm: add /dev/hd[mt] handling
-
-2001/08/13  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/13  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Automatic transfer of queues when changing the spooler.
-	Update printer queue list when exiting during install, so that the
-	"Summary" entry is correct.
-	When one sayd "No" on the test page, the modify dialog was not pointing
-	to the current printer
-
-	* printer.pm: Automatic transfer of queues when changing the spooler.
-	The photo test page was not printed during installation.
-
-	* interactive.pm: Tree lists are sorted again now.
-
-2001/08/13  yduret
-
-	* standalone/drakxconf: removed diskdrake from the choice
-
-2001/08/12  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: longer timeout
-
-2001/08/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix ortograf typo
-
-2001/08/12  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: po->mo is no longer gonna be nasty with us
-
-	* interactive_gtk.pm: clean the nice till fix
-
-	* tools/cvslog2changelog.pl: add till
-
-	* Makefile: ensure locales.tar.bz2 in perl-install/share is build
-	po->mo is no longer gonna be nasty with us
-
-2001/08/12  Till Kamppeter <till@mandrakesoft.com>
-
-	* interactive.pm: Lists get only sorted when the "sort" option is given.
-
-	* printer.pm, printerdrake.pm: Check files before checking RPM database =>
-	Acceleration, waiting windows
-
-2001/08/11  dam's  <damien@mandrakesoft.com>
-
-	* share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc,
-	share/themes/mdk-bg.png: new theme for beta
-
-	* share/theme-editor.pl: updated
-	now works.
-
-2001/08/11  tkamppeter
-
-	* printer.pm, printerdrake.pm: Restructuring continued and debugged
-
-2001/08/10  dam's  <damien@mandrakesoft.com>
-
-	* share/theme-editor.pl: added theme editor
-
-	* network/tools.pm: corrected password file substitution
-
-	* network/ethernet.pm: remove Data::Dumper
-
-	* network/netconnect.pm: added spped and timeout handling for isdn
-
-	* any.pm: corrected autologin question
-
-	* network/isdn.pm: tomeout option deactivated.
-
-	* standalone/draknet: corrected internet cnfiguration pop up, and some
-	other studds
-	ifup/down ethx, anew pixmap for list
-
-	* my_gtk.pm: removed Datta::Dump use
-
-	* pixmaps/eth_card_mini2.png: added
-
-2001/08/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: small font fix
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* share/po/bg.po: updated Bulgarian file
-	updated pot file
-
-2001/08/10  yduret
-
-	* bootlook.pm: corrected vnew usage (thx gc)
-
-2001/08/09  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: added missing use
-	added pixmap for eth. Some factorisation
-
-	* network/tools.pm: added useless function type2interface for future use
-
-	* my_gtk.pm: added gtkbuttonset, and corrected scrollbar height for
-	standalone mode.
-
-	* network/isdn.pm: labels corrections
-
-2001/08/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/tinyfirewall, standalone/printerdrake, standalone/mousedrake,
-	standalone/drakxservices, standalone/net_monitor, standalone/draknet,
-	standalone/drakproxy, standalone/XFdrake, standalone/keyboarddrake,
-	standalone/drakxconf, standalone/adduserdrake, standalone/livedrake,
-	standalone/drakboot, standalone/draksec: use vnew the right way
-	everywhere
-
-	* standalone/drakgw: use vnew the right way everywhere
-	  - if package installs fail, redo one by one to know which one failed
-	  - try to not end up with a failing configuration file, if program is
-	brutally stopped
-	  - if unrecognized config file, don't fail, rather ignore it and
-	proceed
-	  - run dhcpd_update feature (if present) after setup of dhcp server
-
-	* share/rpmsrate: put traceroute in network client also, for claudio
-
-2001/08/09  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone.pm, install_any.pm: rename interactive_pkgs in
-	pkgs_interactive
-
-2001/08/09  siegel
-
-	* standalone/interactive_http/miniserv.logrotate,
-	standalone/interactive_http/Makefile: Added logrotate for
-	"/var/log/drakxtools_http.log"
-
-2001/08/09  tkamppeter
-
-	* printer.pm, printerdrake.pm: New structure for queue modification,
-	general structure clean-up
-
-2001/08/09  yduret
-
-	* bootlook.pm: readded in->do_pkg->install (i sux)
-	rewrite in a more drakx fashion
-
-	* my_gtk.pm: added gtkset_sensitive in wrapper..
-
-2001/08/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: typo
-	makes interactive_pkgs stuff work
-	add interactive_pkgs stuff
-
-	* Makefile: skip module CGI in test_pms (perl_checker)
-
-	* fsedit.pm (check_mntpoint): remove /root from directories that "should
-	remain within the root filesystem"
-
-	* proxy.pm, network/ethernet.pm, network/isdn.pm, tinyfirewall.pm,
-	printerdrake.pm, standalone/drakgw, standalone/draknet,
-	network/tools.pm, bootlook.pm, standalone.pm, standalone/drakproxy,
-	standalone/XFdrake, network/netconnect.pm, standalone/adduserdrake,
-	network/adsl.pm, network/network.pm, printer.pm, network/modem.pm: add
-	interactive_pkgs stuff
-
-	* install_steps_interactive.pm: installing foomatic before doing anything
-	about printer
-	add interactive_pkgs stuff
-
-	* Xconfigurator.pm, any.pm: makes interactive_pkgs stuff work
-	add interactive_pkgs stuff
-
-	* install_any.pm (remove, remove_nodeps): fix typo
-	makes interactive_pkgs stuff work
-	add interactive_pkgs stuff
-
-2001/08/08  tkamppeter
-
-	* install_steps_interactive.pm: Installation fitted to new printerdrake
-
-	* printer.pm: Different choosable test pages available now
-	Corrected init script calls in the (start|stop|restart)_service
-	functions
-
-	* printerdrake.pm: Different choosable test pages available now
-	Removed superfluous line in install_spooler function
-
-2001/08/08  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (naughtyServers): add drakxtools-http
-
-2001/08/07  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: nex features
-
-	* network/netconnect.pm: removed debugging message
-
-	* network/isdn.pm: corrected pkgs use -> require
-
-	* my_gtk.pm: added gtkset_relief
-
-	* pixmaps/network.png, pixmaps/draknet_step.png: added
-
-2001/08/07  Pixel  <pixel@mandrakesoft.com>
-
-	* pixmaps/network.png, pixmaps/draknet_step.png: re-adding with -kb
-	removing for re-adding with -kb
-
-2001/08/07  tkamppeter
-
-	* printer.pm, printerdrake.pm: Automatic installation of all needed
-	packages
-
-2001/08/07  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected label
-
-	* network/netconnect.pm: removed debugging message
-
-	* standalone/net_monitor: nex features
-	added color choice
-	lot of improvments
-
-	* network/isdn.pm: corrected pkgs use -> require
-
-	* my_gtk.pm: added gtkset_relief
-
-	* pixmaps/network.png, pixmaps/draknet_step.png: added
-
-2001/08/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c: say that it's a data read error, when we can't load
-	the ramdisk
-
-	* mdk-stage1/Makefile.common, mdk-stage1/bzlib/bzlib.h: don't use system
-	wide bzlib.h but our own provided one
-
-2001/08/07  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/tree/etc/issue: fix distrib number
-
-	* interactive.pm: adding http feature, mainly for standalone tools
-
-	* standalone/miniserv.pem, standalone/miniserv.pl: Initial revision
-	import
-
-	* standalone/interactive_http/miniserv.pl: add interactive_http
-	Initial revision
-
-	* resize_fat/main.pm: fix
-
-	* partition_table.pm: nicer names for journalised fs
-
-	* Makefile.drakxtools, standalone/interactive_http/miniserv.init,
-	standalone/interactive_http/index.html,
-	standalone/interactive_http/interactive_http.cgi,
-	standalone/interactive_http/miniserv.conf,
-	standalone/interactive_http/miniserv.pam,
-	standalone/interactive_http/miniserv.users, Makefile,
-	standalone/interactive_http/Makefile: add interactive_http
-
-	* interactive_http.pm, standalone/interactive_http.cgi: add
-	interactive_http
-	adding http feature, mainly for standalone tools
-
-	* share/diskdrake.rc: have every journalised in darkred
-
-	* c/stuff.xs.pm: add S_IFIFO
-
-	* standalone/interactive_http/miniserv.pem: Initial revision
-
-2001/08/06  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: debugging, profile coding, isdn 128 debugging
-	corrected gtkradio : shift instead of pop
-
-	* interactive_gtk.pm, install_steps_gtk.pm: corrected gtkradio : shift
-	instead of pop
-
-	* network/netconnect.pm, network/ethernet.pm, network/isdn.pm: debugging,
-	profile coding, isdn 128 debugging
-
-2001/08/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/i386/busybox: try a busybox with better globbing under the SHELL
-
-2001/08/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/de.po: Updates to German file by Peer Dunker <peer46@gmx.net>
-
-	* share/po/vi.po: updated Vietnamese file
-
-2001/08/06  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm: kernel_arch removed
-
-	* fsedit.pm (@suggestions_mntpoints): remove /root (tx2gc)
-
-	* interactive_gtk.pm, interactive_newt.pm: cleanup, functions already
-	defined in interactive
-
-2001/08/06  yduret
-
-	* tinyfirewall.pm: use MDK::Common;
-	use network::netconnect;
-
-	* standalone/drakgw: use MDK::Common;
-	use network::netconnect; and update functions call from netconnect
-
-2001/08/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eo.po: updated Esperanto file
-
-2001/08/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm: switch to gtk install when
-	interactiveSteps is defined
-
-2001/08/05  tkamppeter
-
-	* printer.pm, printerdrake.pm: Automatic installation and start of the
-	desired printer spooler
-
-2001/08/04  Pixel  <pixel@mandrakesoft.com>
-
-	* share/list: add tune2fs enabling switching from ext2 to ext3
-
-	* fs.pm, fsedit.pm, partition_table.pm: add ext3 support
-
-	* diskdrake.pm: add ext3 support
-	(Type): handle lossless switch from ext2 to ext3
-
-	* pkgs.pm: make perl_checker happy
-
-	* c/stuff.xs.pm, c/Makefile.PL: add is_ext3
-
-	* common.pm: moved arch() and alike to MDK::Common::System
-
-2001/08/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (choosePackages): simplify, fix
-	setSelectedFromCompssList not called in
-	expert even the first_time (especially nasty for auto_installs)
-
-	* fs.pm, partition_table.pm, fsedit.pm: add ext3 support
-
-	* diskdrake.pm: add ext3 support
-	(Type): handle lossless switch from ext2 to ext3
-
-	* install_steps_gtk.pm: add the feather feature, but do not enable it
-
-	* interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/
-	(wait_msg doesn't
-	exist anywhere, it must be a fpons typo)
-
-	* pkgs.pm: make perl_checker happy
-
-	* c/stuff.xs.pm, c/Makefile.PL: add is_ext3
-
-	* bootloader.pm: as when lilo is selected, we don't try to install grub,
-	just create the
-	config file in case it may be useful
-
-	* common.pm: moved arch() and alike to MDK::Common::System
-
-	* partition_table_raw.pm: add yaboot detection
-
-	* install_any.pm, share/rpmsrate: create a new flags "X" selected by
-	default, contain what X related packages
-	which were in "SYSTEM"
-
-2001/08/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (choosePackages): simplify, fix
-	setSelectedFromCompssList not called in
-	expert even the first_time (especially nasty for auto_installs)
-
-	* install_steps_gtk.pm: add the feather feature, but do not enable it
-
-	* bootloader.pm: as when lilo is selected, we don't try to install grub,
-	just create the
-	config file in case it may be useful
-
-	* interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/
-	(wait_msg doesn't
-	exist anywhere, it must be a fpons typo)
-
-	* share/rpmsrate, install_any.pm: create a new flags "X" selected by
-	default, contain what X related packages
-	which were in "SYSTEM"
-
-2001/08/03  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor, network/tools.pm, network/netconnect.pm,
-	network/isdn.pm: debugging, 128Kb/s ISDN
-
-	* Makefile.drakxtools, Makefile: added network pms
-
-2001/08/03  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm: typo fix
-	replace isJfs/isXfs/... with isThisFs("jfs"
-
-	* install_any.pm: replace isJfs/isXfs/... with isThisFs("jfs"
-	update_userkderc is now called update_gnomekderc
-
-	* Makefile: better po skipping
-
-	* commands.pm (sync): (re-?)add
-
-	* fs.pm, install_steps_interactive.pm, diskdrake.pm, bootloader.pm:
-	replace isJfs/isXfs/... with isThisFs("jfs"
-
-	* fsedit.pm (check_mntpoint): /root should remain within the root
-	filesystem
-
-	* install_steps.pm (choosePartitionsToFormat): toFormatUnsure=1 for /usr
-	update_userkderc is now called update_gnomekderc
-
-2001/08/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/adsl.c: 
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-	* mdk-stage1/doc/TECH-INFOS: 
-	  - small update
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-2001/08/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/08/02  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm, services.pm, install_interactive.pm,
-	network/netconnect.pm, install_any.pm, Xconfigurator.pm: instead of
-	testing if ref($in) or ref($o) contains /gtk/, test if interactive_gtk
-	is in ISA of the object
-
-	* partition_table.pm, fsedit.pm, diskdrake.pm: JFS support
-
-2001/08/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/adsl.c: 
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-	* mdk-stage1/doc/TECH-INFOS: 
-	  - small update
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-2001/08/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/08/02  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: instead of testing if ref($in) or ref($o) contains
-	/gtk/, test if interactive_gtk is in ISA of the object
-	add jfs support
-
-	* install_steps_interactive.pm, services.pm, install_interactive.pm,
-	network/netconnect.pm, Xconfigurator.pm: instead of testing if ref($in)
-	or ref($o) contains /gtk/, test if interactive_gtk is in ISA of the
-	object
-
-	* partition_table.pm: JFS support
-	add jfs support
-
-	* fsedit.pm, diskdrake.pm: JFS support
-
-	* tools/ntp_servers.pl, timezone.pm: update ntp servers list
-
-	* fs.pm, share/list: add jfs support
-
-2001/08/02  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/ntp_servers.pl, timezone.pm: update ntp servers list
-
-	* fs.pm, share/list, partition_table.pm, install_any.pm: add jfs support
-
-2001/08/01  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: write_on_text writes in blue instead of black
-
-	* network/isdn.pm: typo
-	added de-installation before installateion
-
-	* network/netconnect.pm: translation correction
-
-2001/08/01  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, fsedit.pm: handle auto_allocate_raids for
-	auto_installs
-
-	* raid.pm (new): now works with a list of partitions
-
-2001/08/01  tkamppeter
-
-	* printer.pm: Fixed bug in recognizing the printer ID in the Foomatic
-	overview.
-
-2001/08/01  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: write_on_text writes in blue instead of black
-
-	* network/isdn.pm: typo
-	added de-installation before installateion
-
-	* network/netconnect.pm: translation correction
-
-2001/08/01  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, fsedit.pm: handle auto_allocate_raids for
-	auto_installs
-
-	* raid.pm (new): now works with a list of partitions
-
-2001/07/31  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: added splash screen between different
-	configurations. Added splash wizard mode
-	added intro step for each configuration type.
-
-	* network/tools.pm: corrected ask_connect_now
-
-	* my_gtk.pm: added write_on pixmap : a function to write text on pixma,
-	using fonts.
-
-	* network/ethernet.pm: added intro step for each configuration type.
-
-2001/07/31  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: after copying the auto install floppy,
-	sync in case you shall remove the
-	floppy right after the LED switches off yet the kernel decides to not
-	flush
-	everything
-
-	* modules.pm, mdk-stage1/modules_descr.h: have "catc" driver for usbnet
-	installs
-
-	* bootloader.pm: load msdos and vfat before mkbootdisk (now using syslinux
-	so..)
-
-2001/07/31  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (translate): empty string translation is an empty string
-
-	* install_gtk.pm (test_mouse): s/my (.*) = 0 if 0/my $1 if 0/
-
-	* share/rpmsrate: add cpio
-	lower gurpmi (5->4)
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: chineese locale
-	support
-	better handling of locales
-
-	* Makefile.drakxtools (install): s/cp -rf/cp -rfL/   (-L = --dereference,
-	aka always follow symbolic links)
-
-	* install_steps_gtk.pm (installPackages): make $show_advertising a global
-	state (for Vincent Meyer)
-
-	* share/Makefile, Makefile: better handling of locales
-
-	* install_steps_auto_install.pm: remove bad prototype
-
-2001/07/30  dam's  <damien@mandrakesoft.com>
-
-	* network/ethernet.pm: added cable internet connection selection
-	added internet connection selection in case of multiple configurations
-
-	* network/netconnect.pm: corrected ask_connect_now behaviour
-	corrected ask_connect_now
-	debug
-	added internet connection selection in case of multiple configurations
-
-	* network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm:
-	corrected ask_connect_now
-	added internet connection selection in case of multiple configurations
-
-2001/07/30  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (getDeps): ensure "depslist.ordered has not same package as
-	hdlist files"
-	occurs when the hdlists are in fact not available
-
-	* share/locales.tar.bz2.ppc, share/locales.tar.bz2,
-	share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh,
-	share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2
-	based on installed glibc
-
-	* printer.pm, printerdrake.pm: use MDK::Common
-	i wonder why it was included and Till used an older version without
-	merging?
-
-	* resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done
-	yet)
-
-	* share/rpmsrate: raise rxvt (4->5)
-	lower rpmdrake & harddrake (5->4)
-	remove rootfiles (unneeded)
-
-	* Makefile: use -excludeMDK::Common::Globals for perl_checker
-	automatic handling of locales.tar.bz2 based on installed glibc
-
-2001/07/30  tkamppeter
-
-	* printer.pm, printerdrake.pm: In beginners mode one chooses only the
-	printer, not the driver (default driver)
-
-2001/07/30  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: debug
-	added internet connection selection in case of multiple configurations
-
-	* network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm:
-	added internet connection selection in case of multiple configurations
-
-	* network/ethernet.pm: added cable internet connection selection
-	added internet connection selection in case of multiple configurations
-
-2001/07/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/config-stage1.h:
-	have a memory limit also for Rescue (different one)
-
-2001/07/30  Pixel  <pixel@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: use MDK::Common
-	i wonder why it was included and Till used an older version without
-	merging?
-
-	* resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done
-	yet)
-
-	* share/rpmsrate: raise rxvt (4->5)
-	lower rpmdrake & harddrake (5->4)
-	remove rootfiles (unneeded)
-
-	* pkgs.pm (getDeps): ensure "depslist.ordered has not same package as
-	hdlist files"
-	occurs when the hdlists are in fact not available
-
-	* Makefile: use -excludeMDK::Common::Globals for perl_checker
-	automatic handling of locales.tar.bz2 based on installed glibc
-
-	* share/locales.tar.bz2.ppc, share/locales.tar.bz2,
-	share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh,
-	share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2
-	based on installed glibc
-
-2001/07/28  tkamppeter
-
-	* printer.pm, printerdrake.pm: Support for PPD files of PostScript
-	printers (when CUPS is used)
-
-2001/07/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: fixed undeselectable group when 'Other' sub-tree
-	is seen as a package.
-
-	* interactive_gtk.pm: allow ask_browse_tree_info_refW to return 0 on
-	cancel (previously always 1).
-	added a before leaving code to clean added reference (else it seems to
-	bahave
-	strangely on changing steps).
-	fixed wrong reference to added icons to ask_browse_tree_info_refW.
-
-	* services.pm: allow cancel on services which do not change anything.
-
-	* install_steps_interactive.pm: changed warn dialog to okcancel dialog
-	when asking user to insert Boot floppy
-	used or Update Modules floppy (die may cause to rerun install else).
-
-2001/07/27  gbeauchesne
-
-	* install_steps_gtk.pm: 
-	  - install_steps_gtk.pm (launchX) : create /var/log, if not existent,
-	for
-	XFree86.log
-
-2001/07/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: allow to escape from Update Modules if you don't
-	want to insert an ext2 floppy
-	Disk -> Floppy for Update Modules disk
-
-2001/07/27  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* share/locales.tar.bz2.ppc, keyboard.pm, help.pm, partition_table.pm,
-	Xconfigurator.pm: last of sync with PPC beta mods
-
-2001/07/27  tkamppeter
-
-	* standalone/printerdrake, printer.pm, printerdrake.pm: Printerdrake
-	changed to use Foomatic, driver options, spooler change
-
-2001/07/26  dam's  <damien@mandrakesoft.com>
-
-	* network/isdn.pm: added firmware loading/configuration
-	not loading the module at detection.
-
-	* standalone/draknet: MDK::common correction
-
-	* modules.pm: added default option id="HiSax" to isdn module
-
-2001/07/26  fcrozat
-
-	* share/po/fr.po: Fix spelling of 'molette'
-
-2001/07/26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: added blank and updatemodules options to DrakX.
-
-	* bootloader.pm: added prioritary kernel entry 'default' as the kernel
-	typically copied from a
-	modified blank.img file with a kernel (no initrd.img necessary to
-	build).
-	This kernel takes precedance over any other kernel.
-
-	* install_steps_interactive.pm: really fixes Diskette with Floppy.
-	fix typo as Diskette to Floppy.
-	add support for new modules load as described by GG.
-
-	* install_steps.pm: fixed some silly typo and tiny bugs.
-	fixed typo as Diskette to Floppy.
-	add support for modified blank.img floppy and Update Modules floppy.
-	In first case copy kernel to /boot/vmlinuz-default to be taken into
-	account by
-	bootloader suggestion method.
-	In second case, check installed kernel and update any modules listed in
-	the
-	Update Modules floppy.
-
-2001/07/26  gbeauchesne
-
-	* bootloader.pm: 
-	  - Don't set "lba32" on ia64
-
-2001/07/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/modules.c: pass
-	"--blank" to DrakX when module loading is disabled
-	  - add "changedisk" feature
-	  - add "updatemodules" feature
-
-	* mdk-stage1/tools.c, mdk-stage1/doc/UPDATEMODULES, mdk-stage1/stage1.h: 
-	  - add "changedisk" feature
-	  - add "updatemodules" feature
-
-	* mdk-stage1/probing.c: silently load usb controllers
-
-2001/07/25  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: fixed new network organization
-
-	* standalone/net_monitor: updated. Profile handling.
-
-	* network/isdn_consts.pm: updated ISDN detection. Added firmware handling
-	and drivers other than hisax
-
-2001/07/25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed no test (or die test) to void package read on depslist
-	(allowed to keep
-	package indexing good on multi-arch).
-	cleaned code to examine depslist.ordered and packages list.
-
-	* rescue/make_rescue_img: fixed to use perl-MDK-Common.
-
-	* tools/syncrpms: fixed still missing rpmtools:: before a version_compare
-	...
-
-2001/07/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules_descr.h: small typo
-
-	* mdk-stage1/init.c, mdk-stage1/newt-frontend.c: Use Yahve quoting
-
-2001/07/25  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile (install): build mo's
-
-	* commands: move to MDK::Common, bool->to_bool
-
-	* common.pm: do not export sync, keep it in common (esp. so that it
-	doesn't conflict with my_gtk::sync
-	(removeXiBSuffix): add TB (tera)
-
-	* share/po/i18n_compssUsers, rescue/make_rescue_img: use MDK::Common
-
-	* share/verify_modules.pl: new common syntax
-
-	* Makefile: 
-	  - temporary hack to have at least good UTF-8 based locales (otherwise
-	rpmlib segfaults)
-	  - touch share/po/*.po, so that they are not rebuilded (pablo takes
-	care of them)
-
-	* share/list: add MDK::Common::Globals
-
-	* partition_table_sun.pm, install2.pm, partition_table.pm, commands.pm,
-	install_steps.pm, partition_table_raw.pm, partition_table_mac.pm: do not
-	export sync, keep it in common (esp. so that it doesn't conflict with
-	my_gtk::sync
-
-2001/07/25  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/modules_descr.h: add decriptions for integrated Apple
-	Network/SCSI hardware
-
-2001/07/24  dam's  <damien@mandrakesoft.com>
-
-	* network/isdn_consts.pm, network/netconnect.pm, network/ethernet.pm:
-	corrected speed fax + PCI, updated configuration
-
-2001/07/24  daouda
-
-	* bootlook.pm: better runlevel handling -> persistent level choice
-
-2001/07/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/07/24  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm: move to MDK::Common, bool->to_bool
-	fix syntax
-	removed/renamed unused/seldom-used functions
-	generalize the use of chomp_ as the functional alternative to chomp (and
-	works on lists)
-
-	* swap.pm: temporary hack to have at least good UTF-8 based locales
-	(otherwise rpmlib segfaults)
-	move to MDK::Common, bool->to_bool
-
-	* unused/scsi.pm, standalone/draknet: generalize the use of chomp_ as the
-	functional alternative to chomp (and works on lists)
-
-	* globals.pm, perl2fcalls: 
-	  - globals is now MDK::Common::Globals
-	  - perl2fcalls is now /usr/bin/perl_checker
-
-	* install_steps_gtk.pm: move to MDK::Common, bool->to_bool
-	move to MDK::Common, bool->to_bool
-	removed/renamed unused/seldom-used functions
-
-	* common.pm: move to MDK::Common, bool->to_bool
-	cleanup (remove unused stuff and dangerous prototypes)
-	removed/renamed unused/seldom-used functions
-	generalize the use of chomp_ as the functional alternative to chomp (and
-	works on lists)
-
-	* network/tools.pm, network/adsl.pm, network/netconnect.pm,
-	network/ethernet.pm, network/isdn.pm, network/modem.pm: 
-	  - globals is now MDK::Common::Globals
-	  - perl2fcalls is now /usr/bin/perl_checker
-	move to MDK::Common, bool->to_bool
-
-	* partition_table_dos.pm, partition_table_empty.pm, my_gtk.pm, modparm.pm,
-	standalone/keyboarddrake, install2.pm, raid.pm, crypto.pm,
-	partition_table_mac.pm, standalone/mousedrake, devices.pm,
-	install_steps.pm, resize_fat/main.pm, help.pm, install_interactive.pm,
-	install_steps_stdio.pm, loopback.pm, resize_fat/any.pm,
-	standalone/drakboot, pkgs.pm, keyboard.pm, Xconfigurator.pm, fs.pm,
-	interactive_gtk.pm, standalone/drakxservices, fsedit.pm,
-	network/network.pm, interactive_stdio.pm, diskdrake.pm, modules.pm,
-	resize_fat/directory.pm, standalone/net_monitor,
-	install_steps_auto_install.pm, partition_table_sun.pm, proxy.pm,
-	lang.pm, partition_table_bsd.pm, tinyfirewall.pm, standalone/draksec,
-	standalone/drakxconf, resize_fat/info_sector.pm,
-	standalone/adduserdrake, sbus_probing/main.pm, printer.pm,
-	partition_table_raw.pm, install_steps_interactive.pm, install_gtk.pm,
-	Xconfigurator_consts.pm, resize_fat/boot_sector.pm, partition_table.pm,
-	standalone/livedrake, standalone/drakgw, mouse.pm, lvm.pm,
-	interactive.pm, share/list, interactive_newt.pm, install_steps_newt.pm,
-	bootloader.pm: move to MDK::Common, bool->to_bool
-
-	* services.pm, printerdrake.pm: move to MDK::Common, bool->to_bool
-	removed/renamed unused/seldom-used functions
-
-	* standalone/diskdrake, install_any.pm, any.pm, Xconfig.pm, timezone.pm,
-	detect_devices.pm, bootlook.pm: move to MDK::Common, bool->to_bool
-	generalize the use of chomp_ as the functional alternative to chomp (and
-	works on lists)
-
-	* Makefile: temporary hack to have at least good UTF-8 based locales
-	(otherwise rpmlib segfaults)
-	move to MDK::Common, bool->to_bool
-	move to MDK::Common, bool->to_bool
-
-2001/07/23  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm, network/tools.pm, network/isdn_consts.pm,
-	network/netconnect.pm, network/isdn.pm: isdn now works with isdn-light.
-	Only 64kb/s and still some debuf stuff to be fixed.
-
-2001/07/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/sk.po: updated Slovak and Croatian files
-
-2001/07/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: cleanup
-
-	* c/stuff.xs.pm, Makefile.drakxtools, standalone.pm, common.pm, Makefile,
-	tools/make_mdkinst_stage2, lang.pm, share/po/Makefile,
-	share/po/.cvsignore: do not use the po's directly. Use mo's through
-	gettext
-
-2001/07/22  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm, network/isdn.pm: updated isdn config, moved
-	isdn_data from netconnect_const to isdn_const
-	big work on isdn. Not finished
-
-	* modules.pm, standalone/net_monitor, network/tools.pm, detect_devices.pm:
-	big work on isdn. Not finished
-
-	* network/netconnect_consts.pm, network/isdn_consts.pm: updated isdn
-	config, moved isdn_data from netconnect_const to isdn_const
-
-2001/07/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* docs/README.pxe: initial release, dhcpd and tftpd only.
-
-2001/07/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/el.po: updated Greek file
-
-2001/07/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: externalize the pm 2 pm_.c in fake_c.pl
-
-	* lang.pm: fix
-	(load_po): enhance readability
-
-	* share/po/fake_c.pl: cleanup
-	externalize the pm 2 pm_.c in fake_c.pl
-
-	* common.pm (translate): basic plural forms handling (not finished)
-
-	* help.pm: fix missing ``"''
-
-	* bootloader.pm: fix
-	(install_lilo): order fat partitions first
-
-2001/07/19  dam's  <damien@mandrakesoft.com>
-
-	* share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc,
-	share/help.png: new color
-
-	* network/netconnect.pm: correct bug. thanx to the little stagiaire.
-
-2001/07/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new
-	graphic logo for 8.1
-
-2001/07/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po,
-	share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po,
-	share/po/eu.po: updated Croatian file
-
-2001/07/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new
-	graphic logo for 8.1
-
-	* Xconfigurator.pm: fixed problable freeze on pci probe.
-
-2001/07/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po,
-	share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po,
-	share/po/eu.po: updated Croatian file
-
-2001/07/19  Pixel  <pixel@mandrakesoft.com>
-
-	* globals.pm: no strict 'refs' instead of 'vars'
-
-	* services.pm: rename ask_install_gtk in ask_install, ask_install is now
-	ask_install_simple (obsolete)
-
-	* install_steps_auto_install.pm: fix exit install in graphical
-	auto_install's
-
-2001/07/19  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm, install_steps_newt.pm, install2.pm: based
-	on Michael Brown <mbrown@fensystems.co.uk> patch:
-	  - enables graphical steps in auto_installs for more than gtk
-	  - various cleanup
-
-	* globals.pm: no strict 'refs' instead of 'vars'
-
-	* services.pm: rename ask_install_gtk in ask_install, ask_install is now
-	ask_install_simple (obsolete)
-
-2001/07/18  mbadaire
-
-	* modules.pm, install_any.pm, bootloader.pm: IA64 adaptation
-
-2001/07/18  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* modules.pm, install_steps.pm, install_steps_interactive.pm,
-	tools/serial_probe/serial.c, detect_devices.pm, partition_table_mac.pm,
-	diskdrake.pm: roll back some changes from PPC beta - OldWorld vs
-	NewWorld bootloader
-	modem detection on ttyS0, new sound module in 2.4.4
-
-2001/07/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: disabled Frame buffer for all S3 cards (hangs with XF4
-	and S3 ViRGE on reboot
-	with Aurora).
-
-	* Xconfigurator.pm: cleaned and added S3 Inc in the list to disable test
-	for these card.
-
-2001/07/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: removed references to XFree86-ISO8859-{2,9} packages (no
-	more used)
-
-	* keyboard.pm: small keyboard changes
-
-2001/07/13  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: update
-
-2001/07/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* fs.pm: fixed wrong examination of fsck return code (exit code 1 says
-	fsck succeeded in
-	fixing partition and now is ok).
-
-	* run_program.pm: changed exit code of failed exec in rooted to 128
-	instead of 1 (may clash with
-	exit code of fsck else).
-
-	* any.pm: fixed bug for writing in /etc/sysconfig/desktop file.
-
-2001/07/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* interactive.pm: added ask_browse_tree_info and ask_browse_tree_info_refW
-	(default).
-
-	* services.pm: reworked to use new service layout for install.
-
-	* install_steps_gtk.pm: use common code for tree with info dialog
-	(individual package selection).
-
-	* fs.pm: fixed wrong examination of fsck return code (exit code 1 says
-	fsck succeeded in
-	fixing partition and now is ok).
-
-	* interactive_gtk.pm: merging common code for individual package selection
-	and service to create
-	ask_browse_tree_info_refW, added featrures for group icon always
-	up-to-date
-	(take some memory but not too much, not used if flat model).
-
-	* run_program.pm: changed exit code of failed exec in rooted to 128
-	instead of 1 (may clash with
-	exit code of fsck else).
-
-	* any.pm: fixed bug for writing in /etc/sysconfig/desktop file.
-
-2001/07/10  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/init.c, mdk-stage1/Makefile.common: minor mods for PPC build,
-	define TIOCSCTTY, Makefile mods
-
-2001/07/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added multiple tries if a transaction of only one package
-	fails.
-
-	* install_any.pm: added LDAP support for authentication.
-
-	* install_steps_interactive.pm: added LDAP support for password
-	authentication, updated root password window look.
-
-	* bootloader.pm: fixed compilation error.
-	removed compilation error, the resolution is not quite good and may be
-	reworked :-)
-
-	* help.pm: updated root password help.
-
-2001/07/09  mbadaire
-
-	* bootloader.pm: modify lilo.conf to elilo.conf if arch ia64
-
-	* common.pm: Add IA64 support
-
-2001/07/08  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that
-	boot partition is
-	set correctly again
-
-2001/07/08  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that
-	boot partition is
-	set correctly again
-
-2001/07/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed selected_leaves. change algorithm as previous one can
-	still causes dead
-	lock and may not reproduce correct list. take care of choice that need
-	to be
-	examined before else another package may be chosen if choice is not
-	satisfied
-	when selecting packages.
-
-	* install_any.pm: change all 8 space into a tabulation, this is simple and
-	may change visual
-	aspect but it gives correct output and filesize by 40%.
-
-2001/07/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed selected_leaves. change algorithm as previous one can
-	still causes dead
-	lock and may not reproduce correct list. take care of choice that need
-	to be
-	examined before else another package may be chosen if choice is not
-	satisfied
-	when selecting packages.
-
-	* install_any.pm: change all 8 space into a tabulation, this is simple and
-	may change visual
-	aspect but it gives correct output and filesize by 40%.
-
-2001/07/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/ntp_servers.pl: some workarounds
-
-2001/07/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/ntp_servers.pl: some workarounds
-
-2001/07/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* keyboard.pm: added DISABLE_WINDOWS_KEY in /etc/sysconfig/keyboard if a
-	laptop is detected.
-
-2001/07/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules_descr.h: add usb net descriptions
-
-2001/07/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm (file2part): created
-
-	* any.pm: ia64 bootloader configuration adaptations
-
-	* bootloader.pm: typo fix
-	ia64 bootloader configuration adaptations
-
-2001/07/04  dam's  <damien@mandrakesoft.com>
-
-	* globals.pm: added error handling
-
-	* network/netconnect.pm, network/ethernet.pm: modularized. It compiles,
-	runs, and works for some stuff.
-	modularization continuated
-	updated CVS:
-	----------------------------------------------------------------------
-	uses the fantastic global module.
-	corrected
-
-	* standalone/draknet: corrected
-
-	* network/tools.pm, network/adsl.pm: modularized. It compiles, runs, and
-	works for some stuff.
-	updated CVS:
-	----------------------------------------------------------------------
-	uses the fantastic global module.
-	corrected
-
-	* network/network.pm: modularized. It compiles, runs, and works for some
-	stuff.
-	modularization continuated
-
-	* network/isdn.pm, network/modem.pm: modularized. It compiles, runs, and
-	works for some stuff.
-	updated CVS:
-	----------------------------------------------------------------------
-	uses the fantastic global module.
-
-	* docs/net_object_class.fig: updated doc
-
-2001/07/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added missing last Card read from Cards+ file.
-	allow S3 card to have VideoRam uncommented, fix 86c368 video driver that
-	seems
-	needing VideoRam too.
-	fixed need of video ram if 86c368 and S3 ViRGE.
-
-	* install_any.pm: another too wide string truncated to 80 chars.
-	make auto_inst.cfg file no longer than 80 chars wide.
-
-	* install_steps_interactive.pm: added back timezone settings (thanks
-	FredC).
-
-2001/07/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/adsl.c: nonsense to exit if interface is not "eth.*"
-
-	* mdk-stage1/newt-frontend.c: very nice things happen when you hardcode
-	arrays to a too small value
-
-	* docs/HACKING: update -d in order to get all the directories...
-
-2001/07/04  mbadaire
-
-	* tools/ia64/elilo.efi, tools/specific_arch, share/list.ia64,
-	tools/ia64/e2fsck.shared: Ia64 Adaptation
-
-	* install_gtk.pm, share/list.i386, common.pm, share/list.ppc, share/list,
-	share/list.alpha, install_steps_gtk.pm, share/list.sparc: Ia64
-	adaptation
-
-2001/07/04  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (selected_leaves): fix dead-loop
-	(selected_leaves): make it work with loops (eg: mandrake_desk loops with
-	control-center resulting on none of them being a leaf)
-
-	* perl2fcalls: check exclude_uses before reporting bad use of "use"
-	exclude module globals from use's to look at
-
-	* globals.pm (import): yet another fix
-	fix a pb when init is called before another import
-	typo correction
-	enhanced: shared values are grouped together based on a name
-	module to share constant values between modules
-
-	* fsedit.pm: add /boot/efi in suggestions for ia64
-
-	* install_interactive.pm, install_steps.pm: fix typo
-	verify a /boot/efi partition exists
-
-	* Makefile, install_any.pm, share/list.ppc, share/list.alpha, share/list,
-	share/list.sparc: remove busybox as default shell. Only use it as the
-	interactive shell on tty2
-
-2001/07/03  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/netconnect_consts.pm, network/tools.pm,
-	network/modem.pm, network/netconnect.pm, network/isdn.pm: network
-	subsystem now compiles. Enjoy
-
-	* docs/net_object_class.fig: documentation about net modules structure
-
-2001/07/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* network/netconnect.pm: fix another dam's sucks
-	fix dam's sucks
-
-	* network/netconnect_consts.pm, Makefile.config: fix dam's sucks
-
-	* standalone/XFdrake: expert is allowed to choose frame buffer.
-
-	* install_steps_interactive.pm: added loadSavePackagesOnFloppy to manage
-	package selection file used by
-	auto_install too from packages tree directly on floppies.
-
-	* share/floppy.png: updated size to 16x22 to be more aligned.
-	for loading/saving packages selection.
-
-	* install_any.pm: modified g_default_packages to be used from package tree
-	save on floppy.
-
-	* install_steps_gtk.pm: added Load/Save on floppy.
-	added improve choice of package, well not very usefull but asked by
-	higher
-	people :-)
-
-2001/07/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/rp-pppoe/gui/html/props-basic.png,
-	mdk-stage1/rp-pppoe/gui/html/props-options.png,
-	mdk-stage1/rp-pppoe/gui/html/props-advanced.png,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png,
-	mdk-stage1/rp-pppoe/gui/html/mainwin.png,
-	mdk-stage1/rp-pppoe/gui/html/props-nic.png: plop
-
-	* modules.pm, mdk-stage1/probing.h, mdk-stage1/.cvsignore,
-	mdk-stage1/usb-resource/Makefile,
-	mdk-stage1/usb-resource/update-usb-ids.pl, mdk-stage1/Makefile,
-	mdk-stage1/usb-resource/.cvsignore, mdk-stage1/probing.c: add support
-	for install from USB Network Adapters
-
-2001/07/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/es.po,
-	share/po/fr.po, share/po/sr.po, share/po/de.po, share/po/el.po,
-	share/po/et.po, share/po/sk.po, share/po/tr.po, share/po/eu.po,
-	share/po/ru.po, share/po/sl.po, share/po/vi.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/wa.po, share/po/da.po,
-	share/po/sv.po, share/po/zh_TW.Big5.po: updated Danish file
-
-2001/07/03  Pixel  <pixel@mandrakesoft.com>
-
-	* timezone.pm (configureTimezone): propose a list of NTP servers
-	(ntp_server): fix
-	add ntp handling
-
-	* fs.pm (mount): fix fsck.ext2'ing
-	(mount): add fsck.ext2 before ext2-mounting
-
-	* share/themes/DarkMarble-gloom2.png: re-adding with -kb
-	re-adding with -kb
-
-	* pixmaps/user.png: re-adding with -kb
-	removing for re-adding with -kb
-	re-adding with -kb
-	removing for re-adding with -kb
-
-	* share/themes/blueHeart-button4.png, share/reload.png,
-	share/themes/focus.png, share/themes/DarkMarble-button3_in.png,
-	share/logo-mandrake.png, share/themes/marble3d-check1.png,
-	share/themes/blueHeart-button_def.png, share/rpm-semiselected.png,
-	share/logo-mandrake-Desktop.png, share/themes/marble3d-check2.png,
-	share/rpm-installed.png, share/themes/marble3d-button1.png,
-	share/logo-mandrake_sav.png, share/themes/mdk-button1.png,
-	share/themes/DarkMarble-check_off.png, pixmaps/harddrive.png,
-	share/themes/marble3d-button_def.png, share/themes/marble3d-button2.png,
-	share/help_sav.png, share/themes/DarkMarble-button3_out_prelight.png,
-	pixmaps/services.png, pixmaps/bootdisk.png, share/rpm-selected.png,
-	share/themes/marble3d-button4.png, pixmaps/bootloader.png,
-	share/themes/DarkMarble-button3_out.png, share/logo-mandrake_trans.png,
-	share/themes/mdk-button4.png, pixmaps/printer.png, share/rpm-base.png,
-	share/logo-mandrake2.png, share/themes/blueHeart-brown_bg1.png,
-	share/themes/marble3d-bg1.png, pixmaps/security.png, share/ftin.png,
-	pixmaps/rootpasswd.png, share/help.png,
-	share/themes/DarkMarble-check_on.png,
-	share/themes/blueHeart-button1.png, pixmaps/keyboard.png,
-	pixmaps/default.png, share/themes/blueHeart-button2.png, pixmaps/X.png,
-	share/themes/DarkMarble-button3_in_prelight.png, share/ftout.png,
-	pixmaps/mouse.png, share/rpm-unselected.png: re-adding with -kb
-	removing for re-adding with -kb
-
-	* install_any.pm, install_steps.pm: add ntp handling
-
-	* tools/addchangelog.pl: reverted the last erroneous modif
-	re-adding with -kb
-
-	* tools/ntp_servers.pl: get a formatted list of NTP servers from an
-	authorised source
-
-	* install_steps_interactive.pm (doPartitionDisks): better error message
-	when no root partition is found
-	(configureTimezone): propose a list of NTP servers
-	add ntp handling
-
-	* docs/comparisons: re-adding with -kb
-
-2001/07/02  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm: new network sources reorganizationCVS:
-	----------------------------------------------------------------------
-
-	* share/list: added modinfo
-
-	* modparm.pm: syntax correction
-
-	* network/netconnect_consts.pm, network.pm, standalone/draknet,
-	network/tools.pm, netconnect.pm, network/netconnect.pm,
-	network/ethernet.pm, network/isdn.pm, network/adsl.pm,
-	network/network.pm, network/modem.pm, netconnect_consts.pm: new network
-	sources reorganization
-
-2001/07/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: update po files
-
-2001/07/02  Pixel  <pixel@mandrakesoft.com>
-
-	* crypto.pm: remove buggy prototype
-
-	* share/po/Makefile: yet even better i18n strings extraction
-	  - fix to add some missing messages
-	  - add more verif
-
-	* c/stuff.xs.pm: use size_t instead of int where it should
-
-	* Xconfigurator.pm (write_XF86Config): fix fpons sucks (multi wacoms in
-	XF3)
-
-	* share/po/b_dump_strings.pm: high level i18n messages getting. only
-	partial stuff. Used only for verification
-
-	* perl2fcalls: add handling of using pkg::func when func is provided by
-	pkg2 use'd by pkg
-
-2001/06/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/id.po: updated Indonesian file
-
-2001/06/25  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm: switch from llseek to lseek64
-
-2001/06/23  siegel
-
-	* share/po/de.po: new german version
-
-2001/06/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: take care of enterprise kernel if installed.
-
-	* install_any.pm: automagically install kernel-enterprise if memory is
-	greater than 800MB.
-
-2001/06/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: unfuzzyise
-
-2001/06/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, tinyfirewall.pm,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, help.pm, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, install_steps_interactive.pm,
-	share/po/pl.po, share/po/no.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	install_steps_gtk.pm, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, bootlook.pm, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	install_steps_newt.pm, share/po/af.po: s/Linux-Mandrake/Mandrake Linux/
-
-2001/06/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added minimal support for rpmtools >= 3.0
-
-2001/06/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: generate_automatic_stage1_params: listize
-	use busybox for the shell of stage2
-
-	* mdk-stage1/Makefile: defaults to not spawn shell
-
-	* mdk-stage1/hack: kloug
-
-	* Makefile, tools/i386/busybox, share/list.ppc, share/list,
-	share/list.alpha, share/aliases: use busybox for the shell of stage2
-
-2001/06/21  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/README, rescue/tree/etc/issue: s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-	s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-
-	* genmodparm: remove duplicate, look in gi/tools
-
-	* standalone/printerdrake, install2, docs/HACKING, tools/genmodparm,
-	mdk-stage1/config-stage1.h, ChangeLog, resize_fat/README,
-	standalone/diskdrake, standalone/XFdrake, rescue/tree/etc/rc.sysinit,
-	mdk-stage1/init.c, tools/mailchangelog.pl, detect_devices.pm,
-	mdk-stage1/doc/README, resize_fat/main.pm, tools/cvslog2changelog.pl,
-	bootloader.pm: s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-
-	* mdk-stage1/make_boot_img: remove GG sux
-	s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-
-2001/06/11  dam's  <damien@mandrakesoft.com>
-
-	* proxy.pm: updated
-	typoCVS:
-	----------------------------------------------------------------------
-	proxy
-
-	* my_gtk.pm: added gtkset_layout
-
-	* standalone/drakproxy: corrected CVS:
-	----------------------------------------------------------------------
-	updated
-	perlised
-
-	* interactive.pm: no icon if wizard
-
-2001/06/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: added some bigger memory range.
-
-	* Xconfigurator.pm: fix missing newline on /etc/X11/glx.conf when
-	modifying mga_dma = 0
-	really fix the Matrox G200 PCI card acceleration using XF3, by disabling
-	DMA on
-	/etc/X11/glx.conf
-	added magic probe of resolution found, if the probed resolution seems
-	strange
-	according to memory available, it try to let the user select the right
-	resolution and depth.
-
-	* install_steps.pm, printer.pm: applied patches given for printer
-	configuration bug reported by David Eastcott.
-
-2001/06/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: have PPP drivers in net_raw rather than in net
-	add PPP modules for 'net' drivers
-
-	* rescue/tree/etc/rc.sysinit: minor changes
-
-	* rescue/tree/etc/inittab, rescue/tree/sbin/fakeshutdown: umount as much
-	as possible before rebooting the rescue
-
-	* mdk-stage1/ppp/pppd/magic.c, mdk-stage1/ppp/pppd/md5.c,
-	mdk-stage1/ppp/pppd/utils.c, mdk-stage1/ppp/pppd/pathnames.h,
-	mdk-stage1/ppp/pppd/options.c, mdk-stage1/ppp/pppd/main.c,
-	mdk-stage1/ppp/pppd/multilink.c, mdk-stage1/ppp/pppd/auth.c: have adsl
-	pppoe installation available
-	Initial revision
-	import initial ppp sources
-
-	* mdk-stage1/dhcp.c: change location of error message when no reply
-	received
-
-	* mdk-stage1/rp-pppoe/man/pppoe-relay.8,
-	mdk-stage1/rp-pppoe/configs/firewall-masq,
-	mdk-stage1/rp-pppoe/gui/html/props-nic.png,
-	mdk-stage1/rp-pppoe/src/pppoe-sniff.c,
-	mdk-stage1/rp-pppoe/configs/firewall-standalone,
-	mdk-stage1/rp-pppoe/gui/html/tkpppoe.html,
-	mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE, mdk-stage1/rp-pppoe/go-gui,
-	mdk-stage1/rp-pppoe/gui/tkpppoe.in, mdk-stage1/rp-pppoe/man/adsl-stop.8,
-	mdk-stage1/rp-pppoe/scripts/adsl-start.in,
-	mdk-stage1/rp-pppoe/man/pppoe-sniff.8, mdk-stage1/rp-pppoe/go,
-	mdk-stage1/rp-pppoe/man/pppoe.8,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png,
-	mdk-stage1/rp-pppoe/gui/tkpppoe.1, mdk-stage1/rp-pppoe/src/Makefile.in,
-	mdk-stage1/rp-pppoe/src/pppoe.c, mdk-stage1/rp-pppoe/src/pppoe-server.c,
-	mdk-stage1/rp-pppoe/src/pppoe.h, mdk-stage1/rp-pppoe/gui/wrapper.c,
-	mdk-stage1/rp-pppoe/man/pppoe-server.8,
-	mdk-stage1/rp-pppoe/configs/pppoe.conf,
-	mdk-stage1/rp-pppoe/gui/html/props-advanced.png,
-	mdk-stage1/rp-pppoe/src/common.c, mdk-stage1/rp-pppoe/src/install-sh,
-	mdk-stage1/rp-pppoe/doc/LICENSE, mdk-stage1/rp-pppoe/src/configure,
-	mdk-stage1/rp-pppoe/src/config.h.in, mdk-stage1/rp-pppoe/src/relay.c,
-	mdk-stage1/rp-pppoe/src/discovery.c, mdk-stage1/rp-pppoe/src/if.c,
-	mdk-stage1/rp-pppoe/doc/CHANGES, mdk-stage1/rp-pppoe/src/relay.h,
-	mdk-stage1/rp-pppoe/scripts/adsl-init.in,
-	mdk-stage1/rp-pppoe/rp-pppoe.spec,
-	mdk-stage1/rp-pppoe/scripts/adsl-connect.in,
-	mdk-stage1/rp-pppoe/man/pppoe.conf.5,
-	mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in,
-	mdk-stage1/rp-pppoe/man/adsl-start.8,
-	mdk-stage1/rp-pppoe/gui/html/mainwin.png,
-	mdk-stage1/rp-pppoe/rp-pppoe-gui.spec,
-	mdk-stage1/rp-pppoe/gui/html/props-basic.png,
-	mdk-stage1/rp-pppoe/man/adsl-status.8,
-	mdk-stage1/rp-pppoe/configs/pppoe-server-options,
-	mdk-stage1/rp-pppoe/man/adsl-connect.8,
-	mdk-stage1/rp-pppoe/scripts/adsl-setup.in,
-	mdk-stage1/rp-pppoe/scripts/adsl-stop.in,
-	mdk-stage1/rp-pppoe/gui/Makefile.in, mdk-stage1/rp-pppoe/src/debug.c,
-	mdk-stage1/rp-pppoe/doc/PROBLEMS, mdk-stage1/rp-pppoe/src/ppp.c,
-	mdk-stage1/rp-pppoe/README,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png,
-	mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1,
-	mdk-stage1/rp-pppoe/scripts/adsl-status,
-	mdk-stage1/rp-pppoe/man/adsl-setup.8,
-	mdk-stage1/rp-pppoe/gui/html/props-options.png,
-	mdk-stage1/rp-pppoe/src/configure.in,
-	mdk-stage1/rp-pppoe/configs/pap-secrets, mdk-stage1/rp-pppoe/src/md5.c,
-	mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in,
-	mdk-stage1/rp-pppoe/src/md5.h, mdk-stage1/rp-pppoe/src/plugin.c,
-	mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT: Initial revision
-	import initial sources from rp-pppoe v3.0
-
-	* mdk-stage1/Makefile: change handling of .depend in Makefile
-	have adsl pppoe installation available
-
-	* mdk-stage1/newt-frontend.c: axalon sucks, we can have NEWT_FLAG_PASSWORD
-	that will show us '**' for passwords
-
-	* mdk-stage1/ppp/pppd/.cvsignore, mdk-stage1/ppp/.cvsignore,
-	mdk-stage1/ppp/pppd/Makefile, mdk-stage1/rp-pppoe/src/.cvsignore,
-	mdk-stage1/rp-pppoe/src/config.h, mdk-stage1/adsl.c,
-	mdk-stage1/rp-pppoe/.cvsignore, mdk-stage1/rp-pppoe/src/Makefile,
-	mdk-stage1/make_boot_img: have adsl pppoe installation available
-
-	* detect_devices.pm, install_any.pm, raid.pm, fsedit.pm: include patch to
-	autodetect raid arrays (still needs a kernel that implements the
-	ioctl..)
-
-	* tools/Makefile: perl 5.6.1 now
-
-	* mdk-stage1/stage1.c, mdk-stage1/tools.c: do not set root=/dev/ram3 from
-	my code anymore, expect the bootloader to set the parameter correctly
-
-	* mdk-stage1/ppp/scripts/ip-up.local.add, mdk-stage1/ppp/scripts/README,
-	mdk-stage1/ppp/solaris/Makefile.sol2,
-	mdk-stage1/ppp/svr4/ppp_comp.Master, mdk-stage1/ppp/sample/ip-down,
-	mdk-stage1/ppp/solaris/Makefile.sol2-64,
-	mdk-stage1/ppp/include/net/ppp_defs.h,
-	mdk-stage1/ppp/pppstats/Makefile.sunos4,
-	mdk-stage1/ppp/chat/Makefile.sol2, mdk-stage1/ppp/pppd/sys-linux.c,
-	mdk-stage1/ppp/pppd/ipxcp.c, mdk-stage1/ppp/pppd/ipxcp.h,
-	mdk-stage1/ppp/pppdump/deflate.c, mdk-stage1/ppp/pppd/Makefile.linux,
-	mdk-stage1/ppp/pppd/upap.c, mdk-stage1/ppp/modules/deflate.c,
-	mdk-stage1/ppp/README.sunos4, mdk-stage1/ppp/pppdump/Makefile.sol2,
-	mdk-stage1/ppp/configure, mdk-stage1/ppp/pppd/upap.h,
-	mdk-stage1/ppp/svr4/ppp_mod.c, mdk-stage1/ppp/pppstats/Makefile.sol2,
-	mdk-stage1/ppp/pppd/ipv6cp.c, mdk-stage1/ppp/scripts/options-ssh-loc,
-	mdk-stage1/ppp/pppd/plugins/Makefile.sol2, mdk-stage1/ppp/pppd/ipv6cp.h,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c,
-	mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c,
-	mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c,
-	mdk-stage1/ppp/solaris/ppp_ahdlc.c, mdk-stage1/ppp/pppd/magic.h,
-	mdk-stage1/ppp/svr4/ppp_comp_mod.c,
-	mdk-stage1/ppp/include/linux/if_ppp.h, mdk-stage1/ppp/pppd/eui64.c,
-	mdk-stage1/ppp/scripts/secure-card, mdk-stage1/ppp/scripts/redialer,
-	mdk-stage1/ppp/modules/bsd-comp.c, mdk-stage1/ppp/pppd/eui64.h,
-	mdk-stage1/ppp/sunos4/ppp_vdcmd.c, mdk-stage1/ppp/modules/ppp_mod.h,
-	mdk-stage1/ppp/pppd/md5.h, mdk-stage1/ppp/pppd/chap_ms.c,
-	mdk-stage1/ppp/pppd/chap_ms.h, mdk-stage1/ppp/etc.ppp/pap-secrets,
-	mdk-stage1/ppp/solaris/Makefile.top, mdk-stage1/ppp/chat/chat.8,
-	mdk-stage1/ppp/svr4/Makefile.sol2-64, mdk-stage1/ppp/svr4/Makefile.sol2,
-	mdk-stage1/ppp/include/net/ppp-comp.h, mdk-stage1/ppp/sunos4/Makefile,
-	mdk-stage1/ppp/PLUGINS, mdk-stage1/ppp/pppdump/Makefile.sunos4,
-	mdk-stage1/ppp/sample/ip-up, mdk-stage1/ppp/sample/options.ttyXX,
-	mdk-stage1/ppp/scripts/options-rsh-rem, mdk-stage1/ppp/pppd/fsm.c,
-	mdk-stage1/ppp/chat/chat.c, mdk-stage1/ppp/scripts/ppp-on-rsh,
-	mdk-stage1/ppp/pppd/fsm.h, mdk-stage1/ppp/pppd/tdb.c,
-	mdk-stage1/ppp/pppd/patchlevel.h, mdk-stage1/ppp/pppstats/pppstats.8,
-	mdk-stage1/ppp/svr4/ppp.conf, mdk-stage1/ppp/pppd/tdb.h,
-	mdk-stage1/ppp/pppd/demand.c, mdk-stage1/ppp/include/net/if_ppp.h,
-	mdk-stage1/ppp/solaris/Makedefs, mdk-stage1/ppp/modules/if_ppp.c,
-	mdk-stage1/ppp/include/net/slcompress.h, mdk-stage1/ppp/sunos4/Makedefs,
-	mdk-stage1/ppp/pppd/sys-linux.c.wtmp,
-	mdk-stage1/ppp/include/linux/if_pppvar.h,
-	mdk-stage1/ppp/solaris/ppp_comp.c, mdk-stage1/ppp/chat/Makefile.linux,
-	mdk-stage1/ppp/README.cbcp, mdk-stage1/ppp/pppd/ppp.pam,
-	mdk-stage1/ppp/solaris/ppp_comp_mod.c, mdk-stage1/ppp/Changes-2.3,
-	mdk-stage1/ppp/sample/options, mdk-stage1/ppp/pppstats/pppstats.c,
-	mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c,
-	mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile,
-	mdk-stage1/ppp/README.MSCHAP80, mdk-stage1/ppp/pppdump/pppdump.8,
-	mdk-stage1/ppp/sunos4/Makefile.top, mdk-stage1/ppp/include/net/pppio.h,
-	mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/ppp/FAQ,
-	mdk-stage1/ppp/pppd/ipcp.h, mdk-stage1/ppp/pppd/sys-sunos4.c,
-	mdk-stage1/ppp/modules/ppp_comp.c, mdk-stage1/ppp/README.sol2,
-	mdk-stage1/ppp/modules/vjcompress.c, mdk-stage1/ppp/scripts/ppp-on-ssh,
-	mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c, mdk-stage1/ppp/sunos4/ppp.INSTALL,
-	mdk-stage1/ppp/modules/ppp.c, mdk-stage1/ppp/pppdump/pppdump.c,
-	mdk-stage1/ppp/pppd/plugins/passprompt.c,
-	mdk-stage1/ppp/pppdump/Makefile.linux, mdk-stage1/ppp/pppd/lcp.c,
-	mdk-stage1/ppp/pppd/lcp.h, mdk-stage1/ppp/scripts/chat-callback,
-	mdk-stage1/ppp/chat/Makefile.sunos4, mdk-stage1/ppp/SETUP,
-	mdk-stage1/ppp/pppd/Makefile.sol2,
-	mdk-stage1/ppp/pppd/plugins/minconn.c,
-	mdk-stage1/ppp/etc.ppp/options.options,
-	mdk-stage1/ppp/pppdump/Makefile.linux.makeopt,
-	mdk-stage1/ppp/svr4/ppp.Node, mdk-stage1/ppp/scripts/options-ssh-rem,
-	mdk-stage1/ppp/solaris/ppp.c, mdk-stage1/ppp/svr4/ppp.System,
-	mdk-stage1/ppp/etc.ppp/chap-secrets,
-	mdk-stage1/ppp/pppstats/Makefile.linux,
-	mdk-stage1/ppp/sample/pap-secrets,
-	mdk-stage1/ppp/pppd/Makefile.linux.make, mdk-stage1/ppp/pppd/pppd.8,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8,
-	mdk-stage1/ppp/pppd/Makefile.sunos4, mdk-stage1/ppp/scripts/ppp-on,
-	mdk-stage1/ppp/include/linux/ppp_defs.h,
-	mdk-stage1/ppp/scripts/chatchat/chatchat.c,
-	mdk-stage1/ppp/scripts/chatchat/README,
-	mdk-stage1/ppp/modules/ppp_ahdlc.c, mdk-stage1/ppp/svr4/ppp.Master,
-	mdk-stage1/ppp/svr4/Makedefs,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c,
-	mdk-stage1/ppp/svr4/ppp_ahdl.System, mdk-stage1/ppp/pppd/pppd.h,
-	mdk-stage1/ppp/scripts/ppp-off, mdk-stage1/ppp/solaris/Makedefs.sol2,
-	mdk-stage1/ppp/common/zlib.c, mdk-stage1/ppp/scripts/options-rsh-loc,
-	mdk-stage1/ppp/common/zlib.h, mdk-stage1/ppp/solaris/ppp_mod.c,
-	mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux,
-	mdk-stage1/ppp/solaris/ppp_mod.h, mdk-stage1/ppp/scripts/ppp-on-dialer,
-	mdk-stage1/ppp/pppd/sys-solaris.c, mdk-stage1/ppp/README.linux,
-	mdk-stage1/ppp/sample/auth-down, mdk-stage1/ppp/svr4/ppp_ahdl.Master,
-	mdk-stage1/ppp/pppdump/zlib.c, mdk-stage1/ppp/include/pcap-int.h,
-	mdk-stage1/ppp/pppdump/zlib.h, mdk-stage1/ppp/pppd/ccp.c,
-	mdk-stage1/ppp/chat/Makefile.linux.makeopt, mdk-stage1/ppp/pppd/ccp.h,
-	mdk-stage1/ppp/pppd/Makefile.linux.makeopt,
-	mdk-stage1/ppp/include/net/vjcompress.h, mdk-stage1/ppp/pppd/cbcp.c,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh,
-	mdk-stage1/ppp/pppd/cbcp.h, mdk-stage1/ppp/scripts/ip-down.local.add,
-	mdk-stage1/ppp/pppd/tty.c, mdk-stage1/ppp/include/linux/ppp-comp.h,
-	mdk-stage1/ppp/sample/auth-up, mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c,
-	mdk-stage1/ppp/pppd/pppd.h.wtmp, mdk-stage1/ppp/solaris/ppp.conf,
-	mdk-stage1/ppp/pppd/chap.c, mdk-stage1/ppp/pppd/chap.h,
-	mdk-stage1/ppp/scripts/callback, mdk-stage1/ppp/linux/Makefile.top,
-	mdk-stage1/ppp/svr4/ppp_comp.System, mdk-stage1/ppp/pppd/md4.c,
-	mdk-stage1/ppp/svr4/Makedefs.sol2, mdk-stage1/ppp/pppdump/bsd-comp.c,
-	mdk-stage1/ppp/README, mdk-stage1/ppp/pppd/md4.h,
-	mdk-stage1/ppp/etc.ppp/options, mdk-stage1/ppp/svr4/Makefile.top,
-	mdk-stage1/ppp/svr4/Makefile.svr4,
-	mdk-stage1/ppp/pppd/plugins/Makefile.linux,
-	mdk-stage1/ppp/pppdump/ppp-comp.h: Initial revision
-	import initial ppp sources
-
-2001/06/11  odin
-
-	* standalone/drakproxy: first import of drakproxy
-
-2001/06/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): don't check /usr/bin/urpmi, better check
-	/usr/sbin/urpmi.update
-
-	* commands.pm (grep_): add a missing semi-colon
-
-	* share/compssUsers: remove NIS which is handled by DrakX (titi sucks)
-
-2001/06/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/guessmounts, rescue/make_rescue_img, rescue/tree/etc/rc.sysinit,
-	rescue/Makefile: 
-	  - add 'guessmounts' that mimics RH's detecting of partitions when
-	rescue starts
-
-2001/06/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-	* share/po/ru.po, share/po/DrakX.pot: updated Russian file
-
-2001/06/10  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/guessmounts: pixelization (tested!)
-
-	* install_any.pm (g_auto_install): more comments in auto_inst.cfg file
-
-2001/06/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/list.i386: rescuept is in /sbin now
-
-	* share/list: rescuept in /sbin now
-
-2001/06/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: don't wait on upping lo interface
-
-	* mdk-stage1/modules.c: fix minor bug detecting when modules are present
-
-	* mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/random.c:
-	i need working random suite for ppp with dietlibc
-
-	* mdk-stage1/stage1.c: exit when exec fails after fork, i don't want two
-	stage1 processes!
-
-2001/06/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pl.po: updated Polish file
-
-2001/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount): notail in any case
-
-	* tools/i386/netboot/menu.lst.example, tools/i386/netboot/menu.lst,
-	tools/i386/netboot/.cvsignore: menu.lst is now a local file created from
-	the example
-
-	* share/list, rescue/list.i386, rescue/list: switch to perl 5.6.1
-
-	* Makefile: fix
-
-2001/06/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated Russian file
-
-2001/06/01  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: use -FULL postfix for common .c files targetting
-	stage1-full
-
-	* mdk-stage1/stage1.c: minor fix
-
-	* mdk-stage1/newt/textbox.c: don't modify newt code to fix dietlibc bugs,
-	i want to link against glibc too
-
-	* mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/strncat.c:
-	
-	  - have strncat behave the same way as in glibc
-	  - declare that we're using the DIETLIBC in include/stdlib.h, so I can
-	change my mind in "dns.c" to handle broken glibc which is not capable of
-	doing name resolution with a static binary
-
-	* mdk-stage1/dns.c, mdk-stage1/dns.h, mdk-stage1/adsl.c,
-	mdk-stage1/adsl.h, mdk-stage1/nfsmount.c, mdk-stage1/network.c,
-	mdk-stage1/url.c, mdk-stage1/network.h: 
-	  - first draft of adsl support
-	  - get back some code for supporting broken glibc unable to resolve
-	when linked statically
-
-	* mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/lib/tcflush.c,
-	mdk-stage1/dietlibc/lib/cfgetospeed.c, mdk-stage1/dietlibc/lib/speed.c,
-	mdk-stage1/dietlibc/lib/tcsetattr.c,
-	mdk-stage1/dietlibc/include/termios.h,
-	mdk-stage1/dietlibc/include/netdb.h,
-	mdk-stage1/dietlibc/libshell/glob.c: slight modifs to get ppp and pppoe
-	stuff compile better
-
-2001/05/31  daouda
-
-	* bootlook.pm: add runlevel chooser feature
-
-2001/05/31  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/make_rescue_img: check presence of files from list and list.ARCH
-
-	* Makefile (get_needed_files): exit with error message if files from
-	share/list (and
-	share/list.ARCH) are missing
-
-	* install2.pm: hide step formatPartitions when upgrading
-
-2001/05/30  mbadaire
-
-	* mdk-stage1/stage1.c, mdk-stage1/slang/slmalloc.c,
-	mdk-stage1/slang/Makefile, mdk-stage1/Makefile.common,
-	mdk-stage1/insmod-modutils/obj/Makefile,
-	mdk-stage1/insmod-modutils/Makefile, mdk-stage1/bzlib/Makefile,
-	mdk-stage1/init-libc-headers.h, mdk-stage1/newt/Makefile,
-	mdk-stage1/Makefile, mdk-stage1/insmod-modutils/util/Makefile,
-	mdk-stage1/mar/Makefile, mdk-stage1/newt/windows.c: 
-	  - allow build on ia64
-	  - have CFLAGS centralized in Makefile.common (should help ports such
-	as alpha)
-	  - better looking sub makefiles
-
-2001/05/30  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile.drakxtools (install): ensure pm's in subdirs don't have
-	/use(diagnostics|vars|strict)/
-
-2001/05/29  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added fix from Michael Brown to handle pipe in queue
-	name for lpr.
-
-2001/05/29  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/compssUsers: add NIS client to network clients
-
-2001/05/29  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added fix from Michael Brown to handle pipe in queue
-	name for lpr.
-
-2001/05/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/newt-frontend.c: use Axalon patch to hide passwords (highly
-	rewritten..)
-
-2001/05/25  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* rescue/list.ppc, bootloader.pm: add hfs support to rescue - PPC, fix
-	bootstrap creation, formatting sequence
-
-	* install_steps_interactive.pm: fix bootstrap information screen back to
-	orig with missing ":" - PPC
-	add hfs support to rescue - PPC, fix bootstrap creation, formatting
-	sequence
-
-2001/05/25  siegel
-
-	* share/po/de.po: updated time
-	moved to UTF-8
-
-2001/05/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-2001/05/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (g_auto_install): autoExitInstall set if not replay (was
-	the opposite)
-
-2001/05/23  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/list: add scd0...
-
-2001/05/22  siegel
-
-	* share/po/de.po: updates
-
-2001/05/21  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* tools/ppc/mkhybrid-1.12b5.4-x86, tools/ppc/mkINSTALLCD: enable creation
-	of PPC boot CD on x86 platform
-
-2001/05/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: 
-	  - better detect when IP is not good
-	  - error_msg when netmask seems invalid
-	  - don't log too much `guessing netmask'
-
-	* mdk-stage1/probing.c: be sure to print pci vendor and id with 4 digits
-	each
-
-2001/05/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed parted that ask for confirmation if partition
-	table is not right (MAXDATA
-	for example), this cause parted to ignore warning.
-	added blank space between partition windows and linux to help resolving
-	above case.
-	fixed hole in partitionning (need testing), use fdisk to get disk
-	geometry and
-	create partition that matches cylinder boundaries (no more
-	approximation).
-	make sure to create all partitions including /home.
-
-2001/05/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: add log for modules aliasing of SCSI drivers
-	don't write nonsense code to separate frontend from stage1,
-	but rather, try to do some clever things
-
-	* mdk-stage1/probing.c: unify user notification of network and scsi
-	devices that make load of drivers
-	don't write nonsense code to separate frontend from stage1,
-	but rather, try to do some clever things
-
-	* mdk-stage1/stage1.c, mdk-stage1/frontend.h, mdk-stage1/stage1.h,
-	mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c,
-	mdk-stage1/Makefile, mdk-stage1/dhcp.c, mdk-stage1/newt-frontend.c,
-	mdk-stage1/disk.c, mdk-stage1/network.c: don't write nonsense code to
-	separate frontend from stage1,
-	but rather, try to do some clever things
-
-	* mdk-stage1/frontend-common.c: plop
-
-2001/05/16  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/bootloader.png, pixmaps/user.png, pixmaps/security.png,
-	pixmaps/rootpasswd.png, pixmaps/harddrive.png, pixmaps/keyboard.png,
-	pixmaps/default.png, pixmaps/X.png, pixmaps/mouse.png,
-	pixmaps/bootdisk.png, pixmaps/services.png: added icons
-
-	* standalone/printerdrake, standalone/keyboarddrake, standalone/drakboot,
-	standalone/draksec, standalone/drakxservices, standalone/drakgw,
-	standalone/XFdrake, standalone/adduserdrake: added icon management
-
-	* my_gtk.pm, interactive.pm: icons management
-
-	* install2.pm: added icons management
-
-	* standalone/draknet: added icon managment
-
-	* pixmaps/printer.png: added icon
-
-2001/05/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added support for /var creation, and more specific
-	package selection for server.
-	Include option support by VERSION file.
-
-2001/05/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/HACKING, mdk-stage1/frontend.h,
-	mdk-stage1/TECH-INFOS, mdk-stage1/WHY-DIETLIBC, mdk-stage1/stage1.h,
-	mdk-stage1/stdio-frontend.c, mdk-stage1/Makefile, mdk-stage1/README,
-	mdk-stage1/newt-frontend.c: have a 100% independence between UI stuff
-	and code from stage1
-
-2001/05/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po, share/po/de.po, share/po/DrakX.pot, share/po/tr.po:
-	updated Turkish file
-
-2001/05/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: fix yet again DrakX.pot making
-
-	* partition_table.pm: re-add reiserfs as it should
-	add xfs
-
-2001/05/15  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added missing Aurora, added icewm-light that may be
-	usefull.
-
-2001/05/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: libresolv deprecated in GLIBC
-	have stage1-full with pcmcia also compile with dietlibc, cool!
-
-	* mdk-stage1/network.c: fix guess netmask
-	configure_net_device is only used internally
-
-	* mdk-stage1/modules.c, mdk-stage1/modules.h: better modules handling
-	interface (use of enum rather than guessing single numbers..)
-
-	* mdk-stage1/newt-frontend.c: allow wait_message calls to be multi-lines
-
-	* mdk-stage1/pcmcia/cardmgr.c: have stage1-full with pcmcia also compile
-	with dietlibc, cool!
-	  - build glibc and dietlibc targets
-	  - bzero string buffer before sscanf call (dietlibc implementation)
-	  - verify returns of ioperm so that I can use it in test mode
-
-	* mdk-stage1/dietlibc/include/sys/file.h,
-	mdk-stage1/dietlibc/include/sys/io.h,
-	mdk-stage1/dietlibc/syscalls.s/ioperm.S: have stage1-full with pcmcia
-	also compile with dietlibc, cool!
-
-	* mdk-stage1/stage1.c: a bit of size reduction plus some language change
-	blurk
-
-	* mdk-stage1/WHY-DIETLIBC: advocate dietlibc
-
-	* mdk-stage1/dietlibc/lib/vsscanf.c: import vsscanf fix from author
-
-	* mdk-stage1/disk.c: bzero string buffer before sscanf call, security for
-	dietlibc implementation
-
-	* mdk-stage1/network.h: configure_net_device is only used internally
-
-	* mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/pcmcia_probe.c: 
-	  - build glibc and dietlibc targets
-	  - bzero string buffer before sscanf call (dietlibc implementation)
-	  - verify returns of ioperm so that I can use it in test mode
-
-	* standalone/drakgw: full path for iptables
-
-	* mdk-stage1/probing.c: allow wait_message calls to be multi-lines
-	nicer layout for PCI detection messages
-	better modules handling interface (use of enum rather than guessing
-	single numbers..)
-
-2001/05/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po, share/po/ar.po: Updated Turkish file
-
-	* share/keyboards.tar.bz2: Added north-african keyboard
-
-	* keyboard.pm: added arabic azerty keyboard
-
-2001/05/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: fix messages to i18n extracting
-
-2001/05/14  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* fs.pm: s|mkxfs|mkfs.xfs|;
-
-2001/05/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: use new gethostby* interface
-
-	* mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2: add stage1-data
-	which provides the busybox
-
-	* mdk-stage1/network.c: Have the wait_message() with the sleep()
-	  - complies to gethostby functions
-	  - add sleep(2) so that net intf is really up before operation
-	  - more logs
-	  - FTP: don't try to close control connection with data socket, erhm
-	:-(
-	  - debug netmask guessing, with stdio-frontend
-
-	* mdk-stage1/Makefile: i can compile slang and newt with dietlibc now
-	every targets build with dietlibc
-
-	* mdk-stage1/make_boot_img: use busybox for my debugging purpose
-
-	* mdk-stage1/tools.c: no need to poll() for data at beginning of
-	load_ramdisk_fd, it was a fix of another problem (bug with file stdio
-	operations with sockets in dietlibc)
-
-	* mdk-stage1/dietlibc/Makefile: build this new dietlibc
-	import new version of dietlibc
-
-	* mdk-stage1/dns.c, mdk-stage1/dns.h: now use gethostby* functions
-	provided by dietlibc
-
-	* mdk-stage1/url.c: use poll() rather than select(), smaller code size
-
-	* mdk-stage1/stage1.c: we don't use this sucking sash no more
-	we now use `busybox' compiled with the marvellous dietlibc, which
-	provides no less than 73 usefull binaries
-
-	* mdk-stage1/dietlibc/alpha/semop.S, mdk-stage1/dietlibc/lib/sendmsg.c,
-	mdk-stage1/dietlibc/alpha/shmget.S, mdk-stage1/dietlibc/lib/clearerr.c,
-	mdk-stage1/dietlibc/include/sys/ipc.h,
-	mdk-stage1/dietlibc/alpha/sendmsg.S,
-	mdk-stage1/dietlibc/lib/tcgetpgrp.c, mdk-stage1/dietlibc/lib/fwrite.c,
-	mdk-stage1/dietlibc/sparc/__testandset.S,
-	mdk-stage1/dietlibc/syscalls.s/open.S,
-	mdk-stage1/dietlibc/alpha/semget.S, mdk-stage1/dietlibc/dietstdarg.h,
-	mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S,
-	mdk-stage1/dietlibc/lib/nop.c, mdk-stage1/dietlibc/start.h,
-	mdk-stage1/dietlibc/include/sys/syscall.h,
-	mdk-stage1/dietlibc/alpha/accept.S, mdk-stage1/dietlibc/lib/sigjmp.c,
-	mdk-stage1/dietlibc/syscalls.s/ptrace.s,
-	mdk-stage1/dietlibc/lib/isprint.c,
-	mdk-stage1/dietlibc/syscalls.s/dietstat.S,
-	mdk-stage1/dietlibc/alpha/shutdown.S, mdk-stage1/dietlibc/lib/sendto.c,
-	mdk-stage1/dietlibc/sparc/shmat.c, mdk-stage1/dietlibc/include/time.h,
-	mdk-stage1/dietlibc/lib/stat_convert.c, mdk-stage1/dietlibc/lib/send.c,
-	mdk-stage1/dietlibc/lib/isxdigit.c, mdk-stage1/dietlibc/alpha/waitpid.S,
-	mdk-stage1/dietlibc/lib/atexit.c, mdk-stage1/dietlibc/lib/readdir.c,
-	mdk-stage1/dietlibc/include/sys/sem.h,
-	mdk-stage1/dietlibc/syscalls.s/query_module.S,
-	mdk-stage1/dietlibc/lib/strchr.c,
-	mdk-stage1/dietlibc/syscalls.s/dietfstat64.S,
-	mdk-stage1/dietlibc/syscalls.s/lstat64.S,
-	mdk-stage1/dietlibc/i386/setjmp.S, mdk-stage1/dietlibc/lib/alloc.c,
-	mdk-stage1/dietlibc/lib/perror.c,
-	mdk-stage1/dietlibc/include/sys/socket.h,
-	mdk-stage1/dietlibc/lib/creat64.c, mdk-stage1/dietlibc/lib/closedir.c,
-	mdk-stage1/dietlibc/sparc/pipe.S, mdk-stage1/dietlibc/lib/msgrcv.c,
-	mdk-stage1/dietlibc/include/utmp.h,
-	mdk-stage1/dietlibc/syscalls.s/sendfile.S,
-	mdk-stage1/dietlibc/syscalls.s/nice.S,
-	mdk-stage1/dietlibc/syscalls.s/sigprocmask.S,
-	mdk-stage1/dietlibc/syscalls.s/select.S,
-	mdk-stage1/dietlibc/include/sys/mtio.h,
-	mdk-stage1/dietlibc/i386/strchr.S, mdk-stage1/dietlibc/alpha/divl.S,
-	mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S,
-	mdk-stage1/dietlibc/lib/__telldir.c,
-	mdk-stage1/dietlibc/i386/__testandset.S,
-	mdk-stage1/dietlibc/lib/remove.c,
-	mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S,
-	mdk-stage1/dietlibc/lib/fputc.c, mdk-stage1/dietlibc/lib/msgctl.c,
-	mdk-stage1/dietlibc/alpha/clone.S, mdk-stage1/dietlibc/lib/connect.c,
-	mdk-stage1/dietlibc/include/sys/un.h,
-	mdk-stage1/dietlibc/alpha/connect.S,
-	mdk-stage1/dietlibc/include/termios.h,
-	mdk-stage1/dietlibc/lib/sigfillset.c,
-	mdk-stage1/dietlibc/lib/sigismember.c,
-	mdk-stage1/dietlibc/syscalls.s/dietstat64.S,
-	mdk-stage1/dietlibc/i386/start.S, mdk-stage1/dietlibc/lib/shmget.c,
-	mdk-stage1/dietlibc/lib/strtok.c, mdk-stage1/dietlibc/lib/fclose.c,
-	mdk-stage1/dietlibc/lib/tcsetpgrp.c,
-	mdk-stage1/dietlibc/sparc/Makefile.add,
-	mdk-stage1/dietlibc/include/sys/shm.h, mdk-stage1/dietlibc/alpha/send.S,
-	mdk-stage1/dietlibc/i386/__longjmp.S, mdk-stage1/dietlibc/lib/recvmsg.c,
-	mdk-stage1/dietlibc/include/inttypes.h,
-	mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S,
-	mdk-stage1/dietlibc/lib/semget.c, mdk-stage1/dietlibc/lib/open64.c,
-	mdk-stage1/dietlibc/alpha/recvmsg.S,
-	mdk-stage1/dietlibc/syscalls.s/fork.S,
-	mdk-stage1/dietlibc/lib/strcasecmp.c, mdk-stage1/dietlibc/lib/htonl.c,
-	mdk-stage1/dietlibc/lib/accept.c, mdk-stage1/dietlibc/alpha/shmat.S,
-	mdk-stage1/dietlibc/include/features.h,
-	mdk-stage1/dietlibc/include/syslog.h, mdk-stage1/dietlibc/lib/isascii.c,
-	mdk-stage1/dietlibc/syscalls.s/writev.S,
-	mdk-stage1/dietlibc/lib/fputs.c,
-	mdk-stage1/dietlibc/alpha/sigprocmask.S,
-	mdk-stage1/dietlibc/lib/ntohs.c, mdk-stage1/dietlibc/include/sys/uio.h,
-	mdk-stage1/dietlibc/syscalls.s/nanosleep.S,
-	mdk-stage1/dietlibc/syscalls.s/creat.S,
-	mdk-stage1/dietlibc/include/sys/sysinfo.h,
-	mdk-stage1/dietlibc/lib/atof.c, mdk-stage1/dietlibc/alpha/msgsnd.S,
-	mdk-stage1/dietlibc/lib/vsprintf.c, mdk-stage1/dietlibc/lib/toupper.c,
-	mdk-stage1/dietlibc/lib/strlcpy.3, mdk-stage1/dietlibc/lib/sigaddset.c,
-	mdk-stage1/dietlibc/i386/select.S, mdk-stage1/dietlibc/i386/unified.S,
-	mdk-stage1/dietlibc/include/dirent.h,
-	mdk-stage1/dietlibc/include/getopt.h, mdk-stage1/dietlibc/lib/seekdir.c,
-	mdk-stage1/dietlibc/include/net/route.h,
-	mdk-stage1/dietlibc/syscalls.s/exit.S,
-	mdk-stage1/dietlibc/include/pthread.h,
-	mdk-stage1/dietlibc/lib/sprintf.c, mdk-stage1/dietlibc/alpha/msgget.S,
-	mdk-stage1/dietlibc/include/limits.h, mdk-stage1/dietlibc/lib/qsort.c,
-	mdk-stage1/dietlibc/lib/execvp.c,
-	mdk-stage1/dietlibc/syscalls.s/__reboot.S,
-	mdk-stage1/dietlibc/lib/stdin.c,
-	mdk-stage1/dietlibc/syscalls.s/getitimer.S,
-	mdk-stage1/dietlibc/include/grp.h, mdk-stage1/dietlibc/lib/usleep.c,
-	mdk-stage1/dietlibc/lib/lstat.c, mdk-stage1/dietlibc/sparc/setjmp.S,
-	mdk-stage1/dietlibc/sparc/fork.S,
-	mdk-stage1/dietlibc/syscalls.s/__pread.S,
-	mdk-stage1/dietlibc/include/sys/poll.h,
-	mdk-stage1/dietlibc/syscalls.s/personality.S,
-	mdk-stage1/dietlibc/lib/lseek64.c, mdk-stage1/dietlibc/include/setjmp.h,
-	mdk-stage1/dietlibc/lib/recv.c, mdk-stage1/dietlibc/include/string.h,
-	mdk-stage1/dietlibc/include/sys/time.h, mdk-stage1/dietlibc/lib/fstat.c,
-	mdk-stage1/dietlibc/lib/memcmp.c, mdk-stage1/dietlibc/lib/isupper.c,
-	mdk-stage1/dietlibc/include/sys/param.h,
-	mdk-stage1/dietlibc/syscalls.s/__getpagesize.S,
-	mdk-stage1/dietlibc/lib/exec_lib.c, mdk-stage1/dietlibc/alpha/shmdt.S,
-	mdk-stage1/dietlibc/include/dlfcn.h, mdk-stage1/dietlibc/lib/isdigit.c,
-	mdk-stage1/dietlibc/lib/fdopen.c, mdk-stage1/dietlibc/lib/exec_lib.h,
-	mdk-stage1/dietlibc/lib/__lxstat.c, mdk-stage1/dietlibc/alpha/remq.S,
-	mdk-stage1/dietlibc/include/sys/kd.h,
-	mdk-stage1/dietlibc/syscalls.s/read.S, mdk-stage1/dietlibc/lib/fopen.c,
-	mdk-stage1/dietlibc/syscalls.s/sched_yield.S,
-	mdk-stage1/dietlibc/include/sys/mman.h,
-	mdk-stage1/dietlibc/lib/__readdir.c,
-	mdk-stage1/dietlibc/lib/cfgetospeed.c,
-	mdk-stage1/dietlibc/lib/__dtostr.c, mdk-stage1/dietlibc/lib/execv.c,
-	mdk-stage1/dietlibc/alpha/reml.S,
-	mdk-stage1/dietlibc/syscalls.s/fcntl.S,
-	mdk-stage1/dietlibc/include/errno.h, mdk-stage1/dietlibc/lib/ferror.c,
-	mdk-stage1/dietlibc/syscalls.s/ipc.S,
-	mdk-stage1/dietlibc/syscalls.s/mlockall.S,
-	mdk-stage1/dietlibc/lib/fgetc.c, mdk-stage1/dietlibc/lib/strtoull.c,
-	mdk-stage1/dietlibc/include/sys/msg.h,
-	mdk-stage1/dietlibc/syscalls.s/sigsuspend.S,
-	mdk-stage1/dietlibc/lib/isgraph.c, mdk-stage1/dietlibc/lib/vsscanf.c,
-	mdk-stage1/dietlibc/lib/ftell.c, mdk-stage1/dietlibc/include/unistd.h,
-	mdk-stage1/dietlibc/lib/msgsnd.c, mdk-stage1/dietlibc/lib/semop.c,
-	mdk-stage1/dietlibc/include/net/if_arp.h,
-	mdk-stage1/dietlibc/lib/execlp.c,
-	mdk-stage1/dietlibc/syscalls.s/stat64.S,
-	mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/dietstdio.h,
-	mdk-stage1/dietlibc/lib/feof.c, mdk-stage1/dietlibc/lib/opendir.c,
-	mdk-stage1/dietlibc/syscalls.s/fstat64.S,
-	mdk-stage1/dietlibc/syscalls.s/sched_setparam.S,
-	mdk-stage1/dietlibc/include/sys/reboot.h,
-	mdk-stage1/dietlibc/lib/sigdelset.c, mdk-stage1/dietlibc/lib/execl.c,
-	mdk-stage1/dietlibc/include/sys/sendfile.h,
-	mdk-stage1/dietlibc/include/sys/syslog.h,
-	mdk-stage1/dietlibc/syscalls.s/iopl.S, mdk-stage1/dietlibc/lib/msgget.c,
-	mdk-stage1/dietlibc/syscalls.s/sched_getparam.S,
-	mdk-stage1/dietlibc/lib/vsnprintf.c,
-	mdk-stage1/dietlibc/include/signal.h,
-	mdk-stage1/dietlibc/syscalls.s/pause.S,
-	mdk-stage1/dietlibc/include/arpa/inet.h,
-	mdk-stage1/dietlibc/include/sys/wait.h,
-	mdk-stage1/dietlibc/alpha/time.S, mdk-stage1/dietlibc/lib/ttyname.c,
-	mdk-stage1/dietlibc/lib/__lstat64.c, mdk-stage1/dietlibc/lib/__stat64.c,
-	mdk-stage1/dietlibc/alpha/recv.S, mdk-stage1/dietlibc/lib/fgets.c,
-	mdk-stage1/dietlibc/lib/strncat.c, mdk-stage1/dietlibc/lib/__lltostr.c,
-	mdk-stage1/dietlibc/lib/__ltostr.c,
-	mdk-stage1/dietlibc/sparc/__longjmp.S, mdk-stage1/dietlibc/lib/puts.c,
-	mdk-stage1/dietlibc/lib/rand.c, mdk-stage1/dietlibc/syscalls.s/fsync.S,
-	mdk-stage1/dietlibc/include/fnmatch.h, mdk-stage1/dietlibc/lib/fflush.c,
-	mdk-stage1/dietlibc/lib/htons.c,
-	mdk-stage1/dietlibc/syscalls.s/sigaltstack.S,
-	mdk-stage1/dietlibc/include/sys/resource.h,
-	mdk-stage1/dietlibc/lib/__stat64_cvt.c,
-	mdk-stage1/dietlibc/lib/localtime.c,
-	mdk-stage1/dietlibc/alpha/seteuid.c,
-	mdk-stage1/dietlibc/syscalls.s/stime.S,
-	mdk-stage1/dietlibc/include/resolv.h, mdk-stage1/dietlibc/lib/__xstat.c,
-	mdk-stage1/dietlibc/ppc/Makefile.add,
-	mdk-stage1/dietlibc/sparc/unified.S, mdk-stage1/dietlibc/lib/bsearch.c,
-	mdk-stage1/dietlibc/include/net/if.h,
-	mdk-stage1/dietlibc/include/shadow.h,
-	mdk-stage1/dietlibc/lib/__rewinddir.c,
-	mdk-stage1/dietlibc/include/daemon.h, mdk-stage1/dietlibc/lib/mkfifo.c,
-	mdk-stage1/dietlibc/include/paths.h, mdk-stage1/dietlibc/include/pwd.h,
-	mdk-stage1/dietlibc/lib/strrchr.c, mdk-stage1/dietlibc/lib/__seekdir.c,
-	mdk-stage1/dietlibc/syscalls.h, mdk-stage1/dietlibc/alpha/shmctl.S,
-	mdk-stage1/dietlibc/lib/fdglue.c, mdk-stage1/dietlibc/lib/fseek.c,
-	mdk-stage1/dietlibc/include/regex.h,
-	mdk-stage1/dietlibc/include/sys/ptrace.h,
-	mdk-stage1/dietlibc/lib/tcdrain.c,
-	mdk-stage1/dietlibc/syscalls.s/lstat.S,
-	mdk-stage1/dietlibc/alpha/semctl.S, mdk-stage1/dietlibc/lib/recvfrom.c,
-	mdk-stage1/dietlibc/lib/random.c,
-	mdk-stage1/dietlibc/syscalls.s/times.S,
-	mdk-stage1/dietlibc/lib/getpgrp.c, mdk-stage1/dietlibc/lib/cfmakeraw.c,
-	mdk-stage1/dietlibc/lib/stat.c, mdk-stage1/dietlibc/syscalls.s/write.S,
-	mdk-stage1/dietlibc/syscalls.s/dietlstat64.S,
-	mdk-stage1/dietlibc/ppc/__testandset.S,
-	mdk-stage1/dietlibc/include/mntent.h,
-	mdk-stage1/dietlibc/include/sys/file.h,
-	mdk-stage1/dietlibc/syscalls.s/fstat.S,
-	mdk-stage1/dietlibc/syscalls.s/llseek.S,
-	mdk-stage1/dietlibc/lib/strsep.c,
-	mdk-stage1/dietlibc/include/sys/stat.h,
-	mdk-stage1/dietlibc/syscalls.s/munlockall.S,
-	mdk-stage1/dietlibc/syscalls.s/setpriority.S,
-	mdk-stage1/dietlibc/include/assert.h,
-	mdk-stage1/dietlibc/include/strings.h,
-	mdk-stage1/dietlibc/include/alloca.h, mdk-stage1/dietlibc/lib/gmtime.c,
-	mdk-stage1/dietlibc/lib/shmat.c, mdk-stage1/dietlibc/lib/__isnan.c,
-	mdk-stage1/dietlibc/ppc/__longjmp.S,
-	mdk-stage1/dietlibc/lib/__closedir.c,
-	mdk-stage1/dietlibc/include/sys/signal.h,
-	mdk-stage1/dietlibc/lib/rewinddir.c, mdk-stage1/dietlibc/lib/stdout.c,
-	mdk-stage1/dietlibc/lib/vfprintf.c, mdk-stage1/dietlibc/.cvsignore,
-	mdk-stage1/dietlibc/lib/telldir.c, mdk-stage1/dietlibc/include/glob.h,
-	mdk-stage1/dietlibc/lib/tm_conv.c,
-	mdk-stage1/dietlibc/syscalls.s/reboot.S,
-	mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S,
-	mdk-stage1/dietlibc/syscalls.s/umount2.S,
-	mdk-stage1/dietlibc/syscalls.s/readv.S,
-	mdk-stage1/dietlibc/lib/__fxstat.c,
-	mdk-stage1/dietlibc/include/sys/select.h,
-	mdk-stage1/dietlibc/syscalls.s/syslog.S,
-	mdk-stage1/dietlibc/syscalls.s/sysinfo.S,
-	mdk-stage1/dietlibc/lib/fprintf.c,
-	mdk-stage1/dietlibc/include/sys/cdefs.h, mdk-stage1/dietlibc/README,
-	mdk-stage1/dietlibc/lib/fread.c, mdk-stage1/dietlibc/lib/getpwnam.c,
-	mdk-stage1/dietlibc/syscalls.s/getcwd.S,
-	mdk-stage1/dietlibc/lib/getservent.c, mdk-stage1/dietlibc/lib/tolower.c,
-	mdk-stage1/dietlibc/diet.c, mdk-stage1/dietlibc/alpha/recvfrom.S,
-	mdk-stage1/dietlibc/include/elf.h, mdk-stage1/dietlibc/alpha/sendto.S,
-	mdk-stage1/dietlibc/lib/fileno.c, mdk-stage1/dietlibc/i386/clone.S,
-	mdk-stage1/dietlibc/lib/__opendir.c,
-	mdk-stage1/dietlibc/include/sched.h, mdk-stage1/dietlibc/alpha/__time.c,
-	mdk-stage1/dietlibc/lib/ispunct.c, mdk-stage1/dietlibc/lib/printf.c,
-	mdk-stage1/dietlibc/lib/strtod.c, mdk-stage1/dietlibc/lib/strncasecmp.c,
-	mdk-stage1/dietlibc/lib/__getcwd.c,
-	mdk-stage1/dietlibc/include/netinet/in.h,
-	mdk-stage1/dietlibc/lib/shmctl.c,
-	mdk-stage1/dietlibc/syscalls.s/dietlstat.S,
-	mdk-stage1/dietlibc/include/arpa/nameser.h,
-	mdk-stage1/dietlibc/lib/assert_fail.c, mdk-stage1/dietlibc/lib/semctl.c,
-	mdk-stage1/dietlibc/lib/shmdt.c, mdk-stage1/dietlibc/lib/shutdown.c,
-	mdk-stage1/dietlibc/lib/setpgrp.c, mdk-stage1/dietlibc/alpha/msgrcv.S,
-	mdk-stage1/dietlibc/lib/stderr.c,
-	mdk-stage1/dietlibc/syscalls.s/close.S,
-	mdk-stage1/dietlibc/syscalls.s/dietfstat.S,
-	mdk-stage1/dietlibc/include/locale.h,
-	mdk-stage1/dietlibc/syscalls.s/getpriority.S,
-	mdk-stage1/dietlibc/lib/__fstat64.c, mdk-stage1/dietlibc/lib/isalpha.c,
-	mdk-stage1/dietlibc/lib/reboot.c, mdk-stage1/dietlibc/lib/isspace.c,
-	mdk-stage1/dietlibc/include/sys/mount.h,
-	mdk-stage1/dietlibc/lib/creat.c, mdk-stage1/dietlibc/syscalls.s/lseek.S,
-	mdk-stage1/dietlibc/sparc/clone.S, mdk-stage1/dietlibc/dietwarning.h,
-	mdk-stage1/dietlibc/lib/islower.c,
-	mdk-stage1/dietlibc/alpha/Makefile.add, mdk-stage1/dietlibc/lib/abort.c,
-	mdk-stage1/dietlibc/alpha/msgctl.S, mdk-stage1/dietlibc/lib/isalnum.c,
-	mdk-stage1/dietlibc/include/ctype.h,
-	mdk-stage1/dietlibc/include/netdb.h,
-	mdk-stage1/dietlibc/include/memory.h, mdk-stage1/dietlibc/lib/iscntrl.c,
-	mdk-stage1/dietlibc/i386/Makefile.add, mdk-stage1/dietlibc/lib/getopt.c,
-	mdk-stage1/dietlibc/syscalls.s/waitpid.S,
-	mdk-stage1/dietlibc/lib/strtoul.c,
-	mdk-stage1/dietlibc/syscalls.s/stat.S,
-	mdk-stage1/dietlibc/syscalls.s/sysctl.S: import new version of dietlibc
-
-	* mdk-stage1/insmod-busybox/busybox.h: fix conflicts with dietlibc headers
-
-	* mdk-stage1/dietlibc/include/stdio.h,
-	mdk-stage1/dietlibc/include/stdlib.h,
-	mdk-stage1/dietlibc/include/math.h,
-	mdk-stage1/dietlibc/include/sys/times.h: have slang and newt compile
-	with dietlibc
-	import new version of dietlibc
-
-	* mdk-stage1/Makefile.common: new dietlibc binaries location
-
-	* mdk-stage1/newt-frontend.c: i can compile slang and newt with dietlibc
-	now
-
-	* mdk-stage1/dietlibc/lib/abs.c: have slang and newt compile with dietlibc
-
-	* mdk-stage1/dhcp.c: Have the wait_message() with the sleep()
-	  - add a sleep(2) after ioctl ifupping so that further operation can
-	work normally
-	  - more logs
-
-2001/05/14  kjx
-
-	* share/po/zh_CN.GB2312.po: process untranslated
-
-2001/05/14  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, fsedit.pm, partition_table.pm, install_any.pm: basic xfs handling
-
-2001/05/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: fixed missing package which may be selected on
-	hardware during real install.
-
-	* rescue/tree/etc/oem: added support to change boot entries when invoking
-	oem script.
-	fixed missing SCSI support and driver module loading.
-	fixed missing speficic packages not installed on HW detected.
-
-2001/05/08  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: VBox -> HBox in Embedded mode
-
-	* standalone/mousedrake: code cleaned and debugged
-	added mouse test. Ugly
-
-2001/05/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c: fix minor stuff
-	re-include correct layout for [] choices, in a smaller way than before
-
-	* mdk-stage1/tools.c: minor fix
-	needs to poll() for available data before loading ramdisk because ftp
-	transfers would fail in some situations
-
-	* mdk-stage1/init.c: new maxim
-
-	* mdk-stage1/config-stage1.h: adjust COMPRESSION_RATIO so that last star
-	is printed when last blocks of file are read
-
-	* mdk-stage1/dhcp.c: use poll() rather than select() to win some bytesCVS:
-	----------------------------------------------------------------------
-
-2001/05/08  siegel
-
-	* share/po/de.po: fixed plenty ugly typos
-
-2001/05/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po: updated Brazilian file
-
-2001/05/07  yduret
-
-	* docs/README.devel: fix one typo
-
-	* any.pm, bootloader.pm: updated install_lilo() according to new lilo
-	package
-	(/boot/lilo-{menu,graphic,text})
-
-2001/05/06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad output and bad adsl script
-
-2001/05/06  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install2.pm: workaround for msec hang on PPC
-
-2001/05/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: KDE+SOUND -> 4 xmms-arts
-
-2001/05/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* mdk-stage1/mar/mar-extract-only.c: text size micro-opt
-
-2001/05/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: KDE+SOUND -> 4 xmms-arts
-
-2001/05/04  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* c/smp.c, keyboard.pm, Xconfigurator.pm: force XF4 in expert too for PPC,
-	don't run xmodmap, PPC SMP routine placeholder
-
-2001/05/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* mdk-stage1/mar/mar-extract-only.c: text size micro-opt
-
-2001/04/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c: nicer layout for progressbar and
-	statusreport, when update_progression
-	Provide some description of the drivers
-
-	* docs/HACKING: fix
-	pserver -> ext
-
-	* mdk-stage1/tools.c, mdk-stage1/Makefile, mdk-stage1/tools.h,
-	mdk-stage1/newt-frontend.c, mdk-stage1/modules_descr.h,
-	mdk-stage1/modules.c: Provide some description of the drivers
-
-2001/04/30  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/README: s/gi.tar.bz2/DrakX-*.src.rpm/
-
-	* docs/advocacy: fuck'em all
-
-2001/04/26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* docs/README.devel, docs/README: added some more comments for DrakX code
-	source and usage.
-
-2001/04/25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: fixed use of VERSION file to find language.
-	prepare a oem disk to be used by moving all files that will not be
-	installed by oem (oem-master disk preparation).
-
-	* rescue/tree/etc/closurepkgs, rescue/tree/etc/part_and_bootloader: fixed
-	usage of free space on disk, added NVIDIA packages to install.
-
-	* rescue/tree/etc/oem-server: added missing VERSION file.
-	fixed usage of free space on disk, added NVIDIA packages to install.
-
-	* rescue/tree/etc/oem: added missing autologin package.
-	added option to enable oem mode.
-	added missing VERSION file.
-	fixed usage of free space on disk, added NVIDIA packages to install.
-
-2001/04/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: version is labelled "cooker"
-
-2001/04/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/serial_probe/serial.c, tools/serial_probe/serial_probe.c:
-	integrate fg's fixes for includes
-
-2001/04/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* rescue/list.sparc, rescue/list.i386, rescue/list.ppc, rescue/list.alpha,
-	rescue/list: move /sbin/sfdisk to list.arch, update both list.ppc
-
-2001/04/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: fix bug that trashes the network config of stage1
-	during stage2, when no DNS is provided
-
-2001/04/18  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: last corrections
-
-	* standalone/draknet, netconnect.pm: last corrections
-	corrected internet connection test, and parameters editing
-
-	* install_steps_gtk.pm: corrected cursor on details
-
-2001/04/18  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: * put am-utils and autofs in NETWORKING_FILE
-	* drakprofile in level 1
-	* swapped tkinter and python-devel
-	* vnc-server in NETWORKING_REMOTE_ACCESS_SERVER
-	* vnc-SVGALIB in level 2
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed embedded
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: restored grub as everything seems fine.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-
-	* install_steps_interactive.pm: fixed missing mouse update in summary.
-
-2001/04/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: fix 75dpi-fonts bug with MAKEDEV
-
-2001/04/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* standalone/draknet: fixed typo
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated Basque file
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): better ensure
-	'broadcast' insteaf of overriding
-	(setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
-	means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/17  warly
-
-	* share/rpmsrate: put MAKEDEV at end of line
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed embedded
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: restored grub as everything seems fine.
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-	fixed parted problem.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-	* install_steps_interactive.pm: fixed missing mouse update in summary.
-
-2001/04/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated Basque file
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): better ensure
-	'broadcast' insteaf of overriding
-	(setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
-	means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-	fixed parted problem.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): better ensure
-	'broadcast' insteaf of overriding
-	(setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
-	means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-	fixed parted problem.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): set NIS to broadcast
-	when NIS asked. Empty NIS still means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* any.pm: removed Grub if Embedded
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: minor bug.
-
-	* any.pm: removed Grub if Embedded
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: updated
-	updated
-
-	* network.pm: dhcpd -> dhcpcd
-
-	* Xconfigurator.pm: added nice monitor.png
-
-	* netconnect.pm: minor bug.
-	dhcpd -> dhcpcd
-
-	* standalone/draknet: updated
-
-	* pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
-	pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
-	pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
-	pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
-	pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
-	pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
-	pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
-	removed for readd in kb
-
-	* my_gtk.pm: corrected typo
-	added grey fix for contreol-center
-
-2001/04/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added missing rio500 in closure.
-	finally fixed menu by generating /etc/rpm/macros file.
-	added missing LF.
-	now fixed menu problems.
-	try another fix for RPM_INSTALL_LANG as first fr_FR:fr instead of
-	fr:fr_FR.
-	really disable server.
-	maybe fixed RPM_INSTALL_LANG (from "fr" to "fr:fr_FR" for french).
-	fixed to avoid nasty message in wrong places.
-	moved warning message around.
-	fixed wrong LOCALES"...".
-	fixed lang weirdness, fixed minimal size of / partition to be more
-	confortable,
-	fixed default language for starting DrakX after.
-
-	* Xconfig.pm: fixed standalone error for wacom weirdness.
-	fixed HASH() in /etc/X11/XF86Config*.
-
-	* fs.pm: restored not neccessary to load reiserfs for formating.
-	loading reiserfs module before formatting.
-
-2001/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
-	pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
-	XFdrake
-
-	* mdk-stage1/TECH-INFOS: update doc
-
-	* share/po/fr.po: fix minor thing
-
-2001/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: remove BURNER from Utilities
-
-2001/04/16  warly
-
-	* share/rpmsrate: lower portsentry
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: added nice monitor.png
-
-	* standalone/net_monitor: updated
-
-	* pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
-	pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
-	pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
-	pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
-	pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
-	pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
-	pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
-	removed for readd in kb
-
-	* my_gtk.pm: corrected typo
-	added grey fix for contreol-center
-
-2001/04/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfig.pm: fixed standalone error for wacom weirdness.
-	fixed HASH() in /etc/X11/XF86Config*.
-
-	* rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to
-	"fr:fr_FR" for french).
-	fixed to avoid nasty message in wrong places.
-	moved warning message around.
-	fixed wrong LOCALES"...".
-	fixed lang weirdness, fixed minimal size of / partition to be more
-	confortable,
-	fixed default language for starting DrakX after.
-
-2001/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
-	pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
-	XFdrake
-
-2001/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: remove BURNER from Utilities
-
-2001/04/16  warly
-
-	* share/rpmsrate: lower portsentry
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: bugfix
-	added update thread
-	corrected bad install package.
-	updated expert mode
-
-	* network.pm, install_steps.pm: corrected bad install package.
-
-	* Xconfigurator.pm: added nice monitor.png
-
-	* tinyfirewall.pm: corrected package installation
-
-	* standalone/net_monitor: updated
-
-	* pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
-	pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
-	pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
-	pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
-	pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
-	pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
-	pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
-	removed for readd in kb
-
-	* my_gtk.pm: corrected typo
-	added grey fix for contreol-center
-
-	* netconnect.pm: debug
-	corrected bad install package.
-
-2001/04/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfig.pm: fixed standalone error for wacom weirdness.
-	fixed HASH() in /etc/X11/XF86Config*.
-
-	* rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to
-	"fr:fr_FR" for french).
-	fixed to avoid nasty message in wrong places.
-	moved warning message around.
-	fixed wrong LOCALES"...".
-	fixed lang weirdness, fixed minimal size of / partition to be more
-	confortable,
-	fixed default language for starting DrakX after.
-
-2001/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
-	pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
-	XFdrake
-
-2001/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: remove BURNER from Utilities
-
-	* install_any.pm (g_auto_install): do not take 'mkbootdisk'
-
-2001/04/16  warly
-
-	* share/rpmsrate: lower portsentry
-
-2001/04/15  fabman
-
-	* share/po/es.po: updates
-
-2001/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix minor typo
-
-2001/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/gl.po: updated Galician file
-
-2001/04/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (reallyChooseGroups): translate path (eg:
-	Workstation, Server) to make gg happy
-
-2001/04/15  fabman
-
-	* share/po/es.po: updates
-
-2001/04/15  fcrozat
-
-	* share/rpmsrate: Add mozilla-mail and mozilla-irc to correct categories
-
-2001/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix minor typo
-
-2001/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po, share/po/ko.po: Updated Swedish and Korean files
-
-2001/04/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (reallyChooseGroups): translate path (eg:
-	Workstation, Server) to make gg happy
-
-	* printerdrake.pm (main): restore the "Ok" button for the queues
-	manipulation
-
-	* any.pm (write_passwd_user): fix use of local
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): add an eval
-	around "require log" to keep perl from going totally mad (getting things
-	like v18.843.482 required--this is only v5.6.0)
-
-2001/04/15  yduret
-
-	* bootlook.pm: bug fix: if cancel pressed in lilo/grub choice => return to
-	mcc normally
-	fix layout & size
-
-2001/04/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected isdn detect display
-
-	* standalone/net_monitor, standalone/draknet: wait 10 sec, instead of 7
-
-2001/04/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: changed priority level from 2 to 4 for rate
-	selection of packages.
-
-	* pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (naughtyServers): add apache
-
-	* install_gtk.pm (createXconf): ensure the mouse device is created (mainly
-	for auto_inst)
-
-	* install_steps_interactive.pm (exitInstall): fix bad i18n of Replay
-	button (thx2submarine)
-
-2001/04/14  warly
-
-	* share/rpmsrate: lower viavoicemenu to 1 to avoid error message for
-	powerpack boxes without ViaVoice
-
-2001/04/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: changed priority level from 2 to 4 for rate
-	selection of packages.
-
-	* pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
-	test)
-
-	* Xconfigurator.pm (use vars): fix stew sux
-	(testFinalConfig): nicer stderr handling
-
-	* interactive_gtk.pm, interactive_newt.pm (exit): fix the exit code
-
-2001/04/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed to gzip synthesis file.
-	safe guard generation of synthesis file.
-	fixed umask on urpmi list file and generate synthesis file for each
-	hdlist.
-
-	* pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (configureX): fix link /etc/gtk (to
-	/mnt/etc/gtk) instead of /etc/gtkrc
-
-	* any.pm (autologin): spurious messages of chksession  -> dave nul
-
-	* interactive_newt.pm (exit): fix the exit code
-	(wait_message_endW): don't log "none stacked wait-messages" (as a lot of
-	them exist...)
-	(waitbox): remove spurious '0' in wait_messages
-
-	* lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
-	test)
-
-	* Xconfigurator.pm (use vars): fix stew sux
-	(testFinalConfig): nicer stderr handling
-
-	* interactive_gtk.pm (exit): fix the exit code
-
-2001/04/14  warly
-
-	* share/compssUsers, share/list, share/rpmsrate: add icons in compssUser
-	and list
-
-2001/04/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed to gzip synthesis file.
-	safe guard generation of synthesis file.
-	fixed umask on urpmi list file and generate synthesis file for each
-	hdlist.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (configureX): fix link /etc/gtk (to
-	/mnt/etc/gtk) instead of /etc/gtkrc
-
-	* any.pm (autologin): spurious messages of chksession  -> dave nul
-
-	* interactive_newt.pm (exit): fix the exit code
-	(wait_message_endW): don't log "none stacked wait-messages" (as a lot of
-	them exist...)
-	(waitbox): remove spurious '0' in wait_messages
-
-	* lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
-	test)
-
-	* Xconfigurator.pm (use vars): fix stew sux
-	(testFinalConfig): nicer stderr handling
-
-	* interactive_gtk.pm (exit): fix the exit code
-
-2001/04/14  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm: updates to X, mouse
-	setup for PPC
-
-2001/04/14  warly
-
-	* share/compssUsers, share/list, share/rpmsrate: add icons in compssUser
-	and list
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* Xconfigurator.pm: corrected
-	updated
-	updated message
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still
-	opened).
-
-2001/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: Updated Norwegian file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated po files
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (main): reverse message
-
-	* install_steps_gtk.pm (installPackages): hide Details button sooner
-	(installPackages): do not show button "Details" when no advertising
-
-	* Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for
-	ru(winkeys), it is redondant
-
-	* interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250
-
-	* any.pm (ask_users): do not have an empty icon. better not ask for icon
-	if no icon
-
-2001/04/13  siegel
-
-	* share/po/de.po: updates
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* Xconfigurator.pm: corrected
-	updated
-	updated message
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still
-	opened).
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (main): reverse message
-
-	* install_steps_gtk.pm (installPackages): hide Details button sooner
-	(installPackages): do not show button "Details" when no advertising
-
-	* Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for
-	ru(winkeys), it is redondant
-
-	* interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250
-
-	* any.pm (ask_users): do not have an empty icon. better not ask for icon
-	if no icon
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* Xconfigurator.pm: corrected
-	updated
-	updated message
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install_steps_gtk.pm (installPackages): hide Details button sooner
-	(installPackages): do not show button "Details" when no advertising
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated
-	updated message
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* install_steps_gtk.pm (installPackages): do not show button "Details"
-	when no advertising
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated
-	updated message
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* install_steps_gtk.pm (installPackages): do not show button "Details"
-	when no advertising
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated
-	updated message
-
-	* standalone/draknet: message corrected
-	updated
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* bootlook.pm: embedded = 0 -> local
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* install_steps_gtk.pm (installPackages): do not show button "Details"
-	when no advertising
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-	add DATABASES to Database
-	add icons for server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* network.pm: updated wireless configuration
-
-	* netconnect.pm: corrected loop in isdn + other things
-
-	* bootlook.pm: embedded = 0 -> local
-
-	* standalone/draknet: updated
-	added delete event
-
-2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* netconnect.pm: fixed syntax error :-)
-
-	* install_steps.pm, install_steps_gtk.pm: added conditional update-menus
-	if package are installed.
-
-	* install_steps_interactive.pm: added conditional update-menus if package
-	are installed.
-	make sure update-menus is called after installing cups related packages.
-
-2001/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/fr.po, share/po/sv.po, share/po/hu.po: Updated
-	Croatian and Swedish files
-
-	* share/po/sl.po, share/po/cy.po, share/po/ca.po, share/po/ga.po,
-	share/po/is.po, share/po/cs.po: Removed po files with too low leve lof
-	translating ( < 60% )
-	so they are not included on final CD
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* bootlook.pm: don't use Locale::GetText, use DrakX's i18n
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* my_gtk.pm (new): make dams happy
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add DATABASES to Database
-	add icons for server
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: remove unnecessary redhat history code
-
-2001/04/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed wrong kernel version extraction (typically for
-	upgrade).
-
-	* install_steps_interactive.pm: removed Cancel of Summary.
-	fixed ask printer configuration.
-
-	* detect_devices.pm: fix Hewlett-Packard to HP in case.
-
-	* standalone/printerdrake: never ask to configure a printer in standalone.
-
-	* printerdrake.pm: automatically add a queue if nothing exists.
-	fixed ask to configure a printer.
-
-	* interactive.pm: removed strict die on empty list.
-
-	* live_install2: added some gtk and gdk_imlib missing variables.
-
-	* live_install: removed gtk variable for data, moved to second script.
-
-	* modules.pm, commands.pm, lang.pm, pkgs.pm, keyboard.pm: fixed log of
-	packdrake.
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: remove unneeded #define
-
-	* standalone/drakgw: add some rule so later on tinyfirewall will not
-	prevent everything from working
-
-	* share/po/fr.po: minor fix
-	write some ppc translations
-
-2001/04/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: Updated Italian file
-
-2001/04/12  Pixel  <pixel@mandrakesoft.com>
-
-	* printer.pm: use run_program and remove "require run_program"s
-
-	* my_gtk.pm (main): only accept X (gdk) events key_press, key_release and
-	exposure (so
-	that not to receive motion_notify which would generate focus_out in
-	non-interesting cases)
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): fix the test
-	for empty lists
-	(ask_from_entries_refH_powered_normalize):
-	  - when not_edit and empty list, die.
-	  - when not_edit and single element list, don't display that entry.
-
-	* lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
-	* modules.pm (configure_pcmcia): better handling for not running cardmgr
-	many times
-	(configure_pcmcia): always run cardmgr so that it is run even if stage1
-	did create a /var/run/stab. This is just a try :-/
-
-2001/04/12  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: if neuneu but explicited clicked, don't skip
-	corrected pcmcia driver
-
-2001/04/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: removed Cancel of Summary.
-	fixed ask printer configuration.
-
-	* common.pm: improved bestMatchSentence2.
-
-	* detect_devices.pm: fix Hewlett-Packard to HP in case.
-
-	* standalone/printerdrake: never ask to configure a printer in standalone.
-
-	* printerdrake.pm: automatically add a queue if nothing exists.
-	fixed ask to configure a printer.
-
-	* interactive.pm: removed strict die on empty list.
-
-	* modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of
-	packdrake.
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: add some rule so later on tinyfirewall will not
-	prevent everything from working
-
-	* share/po/fr.po: write some ppc translations
-	un-dadouize a problem
-
-2001/04/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: Updated Italian file
-
-2001/04/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix no advertising with less
-	than 20MB of packages
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize):
-	  - when not_edit and empty list, die.
-	  - when not_edit and single element list, don't display that entry.
-
-	* install_steps_interactive.pm (configureX): fix for X test at install
-	with exotic fonts
-
-	* lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
-	* modules.pm (configure_pcmcia): better handling for not running cardmgr
-	many times
-	(configure_pcmcia): always run cardmgr so that it is run even if stage1
-	did create a /var/run/stab. This is just a try :-/
-
-2001/04/12  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: corrected typo
-	added use bootloader
-
-	* standalone/net_monitor: typo
-
-	* netconnect.pm: if neuneu but explicited clicked, don't skip
-	corrected pcmcia driver
-	corrected typo
-
-	* lang.pm: pixel sux
-
-	* network.pm, standalone/draknet: corrected network connection
-
-	* my_gtk.pm: corrected set_modal
-
-2001/04/12  fabman
-
-	* share/po/es.po: updated spanish .po files
-
-2001/04/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: removed Cancel of Summary.
-	fixed ask printer configuration.
-
-	* common.pm: improved bestMatchSentence2.
-
-	* detect_devices.pm: fix Hewlett-Packard to HP in case.
-
-	* standalone/printerdrake: never ask to configure a printer in standalone.
-
-	* printerdrake.pm: automatically add a queue if nothing exists.
-	fixed ask to configure a printer.
-
-	* modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of
-	packdrake.
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: un-dadouize a problem
-	sync
-
-2001/04/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/zh_CN.GB2312.po, share/po/es.po, share/po/fr.po,
-	share/po/sr.po, share/po/de.po, share/po/el.po, share/po/et.po,
-	share/po/sk.po, share/po/eu.po, share/po/sl.po, share/po/vi.po,
-	share/po/ko.po, share/po/eo.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/da.po, share/po/is.po, share/po/zh_TW.Big5.po,
-	share/po/id.po: Updated Chinese file
-
-	* share/po/it.po: Updated Italian file
-	Updated Chinese file
-
-2001/04/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix no advertising with less
-	than 20MB of packages
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize):
-	  - when not_edit and empty list, die.
-	  - when not_edit and single element list, don't display that entry.
-
-	* install_steps_interactive.pm (configureX): fix for X test at install
-	with exotic fonts
-
-	* lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
-	* modules.pm (configure_pcmcia): better handling for not running cardmgr
-	many times
-	(configure_pcmcia): always run cardmgr so that it is run even if stage1
-	did create a /var/run/stab. This is just a try :-/
-
-2001/04/12  siegel
-
-	* share/po/de.po: new german version
-
-2001/04/12  yduret
-
-	* bootlook.pm: added some stuff
-
-2001/04/11  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: no setmodal 0 if wizard
-
-2001/04/12  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: corrected typo
-	added use bootloader
-
-	* netconnect.pm: corrected typo
-
-2001/04/12  fabman
-
-	* share/po/es.po: updated spanish .po files
-
-2001/04/12  siegel
-
-	* share/po/de.po: new german version
-
-2001/04/11  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-mdk.rc: tooltips
-
-	* netconnect.pm: updated
-
-	* my_gtk.pm: no setmodal 0 if wizard
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (reallyChooseGroups): relook
-
-	* install_steps_interactive.pm (chooseGroups): warn if chosen size is too
-	big
-
-	* share/compssUsers: adapt for new profile choosing layout
-
-2001/04/11  yduret
-
-	* bootlook.pm: bug fix in autologin
-
-2001/04/11  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-mdk.rc: tooltips
-
-	* bootlook.pm: updated
-	corrected
-
-	* tinyfirewall.pm: installation of package : not at the same place
-
-	* netconnect.pm: updated
-	added driver for pcmcia, corrected eth conf for pppoe
-
-2001/04/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: added missing LD_LOADER for calling rpm.
-
-	* printerdrake.pm: fixed probe on kernel 2.4.
-	make printer devices more accurate.
-	removed limitation to only one port probed
-
-	* pkgs.pm: added missing use of LD_LOADER for starting parsehdlist on
-	upgrade.
-
-	* detect_devices.pm: avoid need of shell for live upgrade on serial_probe
-	(removed 2>/dev/null which
-	is not necessary).
-	fixed printer probe (usb and parallel).
-
-	* mouse.pm: fix wacom usb tablet
-
-	* standalone/printerdrake: added missing take into account of
-	/etc/modules.conf
-
-	* lang.pm: added missing LD_LOADER reference and remove old code
-	commented.
-
-2001/04/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: unfuzzyize
-	sync with new msg in services.pm and compssUsers
-	sync with pablo update
-	fixes of translations
-	write the shitload of untranslated and fuzzy msg
-
-	* standalone/tinyfirewall: i18n title
-
-	* services.pm: have many more services tooltipped from here so we can get
-	translations afterwards
-
-	* share/compssUsers: fix typos of rpmsrate groups
-
-	* standalone/drakgw: kosmetik
-	do i18n for title also
-
-2001/04/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: Added reference to netscape-chinese_big5 file
-
-	* share/po/DrakX.pot, share/po/wa.po: Updated Walloon file
-	Updated po files
-	Updated Slovak, Walloon and Polish files
-
-	* share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
-	share/po/ko.po, share/po/ja.po, share/po/is.po, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/sk.po, share/po/vi.po,
-	share/po/ca.po, share/po/cs.po: Updated po files
-	Updated Slovak, Walloon and Polish files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/ga.po,
-	share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/sv.po, share/po/hu.po,
-	share/po/no.po, share/po/th.po, share/po/el.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/af.po: Updated po files
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* run_program.pm (rooted): don't call install_any::check_prog if rooted
-
-	* standalone/drakboot: make it work (why was bootloader::install
-	commented?)
-
-	* share/compssUsers: adapt for new profile choosing layout
-
-	* Makefile: take cardmgr-*
-
-	* install_steps_interactive.pm (chooseGroups): warn if chosen size is too
-	big
-	translate the ``path'' in profile selection
-
-	* share/po/i18n_compssUsers: relooking
-
-	* any.pm (setupBootloader): translate the bootloaders to use
-	(setupBootloader): nicer look&feel
-
-	* install_any.pm (fsck_option): add a closing ``"'' so that strings to
-	i18n extraction works
-	(fsck_option): add a closing ``"'' so that strings to i18n extraction
-	works
-	(check_prog): make it work
-
-	* install_steps_gtk.pm (reallyChooseGroups): relook
-	(installPackages): pressing "Details" gives you more detailed info
-	(reallyChooseGroups): start relooking
-	(installPackages): don't display advertising if less 20MB of packages
-	translate the ``path'' in profile selection
-
-2001/04/11  warly
-
-	* share/compssUsers: Add descr for servers
-
-2001/04/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: make printer devices more accurate.
-	removed limitation to only one port probed
-
-	* mouse.pm: fix wacom usb tablet
-
-	* standalone/printerdrake: added missing take into account of
-	/etc/modules.conf
-
-	* detect_devices.pm: fixed printer probe (usb and parallel).
-
-2001/04/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* services.pm: have many more services tooltipped from here so we can get
-	translations afterwards
-
-	* share/po/fr.po: write the shitload of untranslated and fuzzy msg
-
-	* share/compssUsers: fix typos of rpmsrate groups
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* run_program.pm (rooted): don't call install_any::check_prog if rooted
-
-	* diskdrake.pm (More): fix exception relaunching
-
-	* install_any.pm (check_prog): make it work
-
-	* any.pm (setupBootloader): nicer look&feel
-
-	* standalone/drakboot: make it work (why was bootloader::install
-	commented?)
-
-	* Makefile: take cardmgr-*
-
-2001/04/11  fabman
-
-	* share/po/es.po: updated spanish .po file
-
-2001/04/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: make printer devices more accurate.
-	removed limitation to only one port probed
-
-	* mouse.pm: fix wacom usb tablet
-
-	* standalone/printerdrake: added missing take into account of
-	/etc/modules.conf
-
-	* detect_devices.pm: fixed printer probe (usb and parallel).
-
-2001/04/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: write the shitload of untranslated and fuzzy msg
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: to lighten mdkinst_stage2:
-	  - completly remove po's (will be getFile'd)
-	  - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd)
-
-	* standalone/drakboot: make it work (why was bootloader::install
-	commented?)
-
-	* share/aliases: add rmmod -> insmod_
-
-	* lang.pm (get_x_fontset): special cases for some big (size) fonts
-
-	* Makefile: take cardmgr-*
-
-	* install_any.pm (check_prog): make it work
-	(check_prog): if a prog isn't available, try to fetch it via getFile
-	(remove_bigseldom_used): created, purpose: remove unneeded stuff on
-	stage2
-	to allow a getAndSaveFile.
-	(getAndSaveFile): if only one arg is given, assume the name is the same
-
-	* standalone/XFdrake: fix bug for running xfs
-
-	* any.pm (setupBootloader): nicer look&feel
-
-	* diskdrake.pm (More): fix exception relaunching
-	check resize_reiserfs is there or get it
-
-	* run_program.pm (rooted): don't call install_any::check_prog if rooted
-	in install, call install_any::check_prog to allow shadow progs which are
-	fetched when needed via getFile
-
-	* share/list: remove rmmod (is now a symlink)
-
-2001/04/11  siegel
-
-	* share/po/de.po: updated german version
-
-2001/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ca.po: Updated Catalan file
-
-2001/04/10  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: 
-	  - fix wiz_*.png removing
-	  - fix copying cardmgr* which included cardmgr.o
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: to lighten mdkinst_stage2:
-	  - completly remove po's (will be getFile'd)
-	  - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd)
-
-	* standalone/XFdrake: fix bug for running xfs
-
-	* diskdrake.pm: check resize_reiserfs is there or get it
-
-	* share/aliases: add rmmod -> insmod_
-
-	* install_any.pm (check_prog): if a prog isn't available, try to fetch it
-	via getFile
-	(remove_bigseldom_used): created, purpose: remove unneeded stuff on
-	stage2
-	to allow a getAndSaveFile.
-	(getAndSaveFile): if only one arg is given, assume the name is the same
-
-	* share/list: remove rmmod (is now a symlink)
-
-	* run_program.pm: in install, call install_any::check_prog to allow shadow
-	progs which are
-	fetched when needed via getFile
-
-	* lang.pm (get_x_fontset): special cases for some big (size) fonts
-
-2001/04/10  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad network restart
-
-	* my_gtk.pm: corrected bad font
-
-	* network.pm: get rid of ifcfg-
-	minor correction
-
-2001/04/10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fixed selection of CDs.
-
-	* devices.pm: added input/event class of devices (necessary for usb wacom
-	at install)
-
-2001/04/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mkinitrd_helper/mkinitrd_helper.c,
-	mdk-stage1/mkinitrd_helper/Makefile: 
-	  - honour quiet mode at boot time
-	  - fake modprobe to shut up kmod
-
-	* bootlook.pm: do not use french in i18n'ed msg yvounet!!
-
-	* standalone/drakgw: add INTERFACE param in sysconfig parameter for smooth
-	interoperation with bastille-firewall
-
-2001/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: Updated Czech file
-	Updated po files
-
-	* share/po/ko.po, share/po/ja.po, share/po/id.po, share/po/vi.po: Updated
-	Indonesian, Japanese, Korean and Vietnamese files
-	Updated po files
-
-	* share/po/DrakX.pot, share/po/wa.po, share/po/fi.po: Added a missing
-	translatable string
-	Updated po files
-
-	* share/po/ca.po: Updated Catalan file
-	Updated po files
-
-	* share/locales.tar.bz2: Added missing file for Vietnamese
-
-	* share/po/bg.po: Updated Bulgarian file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
-	share/po/fr.po, share/po/ga.po, share/po/sr.po, share/po/de.po,
-	share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/cy.po,
-	share/po/nl.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/da.po, share/po/af.po: Updated po files
-
-2001/04/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm: use gtkset_tip (so that no tip is set when tip eq
-	'')
-	(create_boxradio): handle double_click
-	(ask_from_entries_refW): use radio boxes instead of list/clist if small
-	number
-	of choices
-	(create_ctree): handle single click on node opens the node
-
-	* my_gtk.pm: create and use gtkset_tip
-	(_create_window): XSetInputFocus done only on expose_event of the
-	topmost window
-	(new): ensure only one modal
-
-	* Xconfigurator.pm (main): have an "Ok" button to leave
-
-	* install_steps_gtk.pm: use gtkset_tip
-	(choosePackagesTree): fix "Show automatically selected packages"
-	create and use gtkset_tip
-
-	* Makefile: 
-	  - fix wiz_*.png removing
-	  - fix copying cardmgr* which included cardmgr.o
-
-2001/04/10  warly
-
-	* share/rpmsrate: add viavoicemenu_{us,gr,fe}
-
-2001/04/10  yduret
-
-	* bootlook.pm: grub/lilo mode
-
-2001/04/10  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad network restart
-
-	* my_gtk.pm: corrected bad font
-
-	* network.pm: get rid of ifcfg-
-	minor correction
-
-2001/04/09  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: typo
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs
-	size as the check is done before rounding.
-
-	* bootloader.pm (install_grub): altconfigfile only if /boot is not
-	reiserfs :-/
-
-	* tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many
-	modules.cz)
-
-	* install_any.pm (setPackages): also have SOUND set in compssUsersChoice
-	based on pciusbtable
-
-	* share/compssUsers, share/rpmsrate: 
-	  - SOUND is now a flag
-	  - AUDIO is the group
-
-2001/04/09  siegel
-
-	* tinyfirewall.pm: i18n fixes
-
-2001/04/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixes of grub installation using hd.img
-	fix the fix for loopback mounting of hd.img.
-
-	* Xconfigurator.pm: fixed always 8bpp for autoDefaultDepth.
-
-	* pkgs.pm: changed transaction error management this way: if a transaction
-	fails, DrakX
-	tries to make as many transaction as there are package that have failed
-	to be
-	installed (this means one transaction of only one package). This help
-	installing
-	most package that are correct (as a transaction that failed cause all
-	remaining
-	package to be not installed).
-
-2001/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: 8.0rc -> 8.0
-
-	* rescue/tree/etc/oem: fix english thanks to Kevin
-
-	* standalone/drakgw: do not die when an initscript returns non-0
-	(initscripts too buggy)
-
-2001/04/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/gl.po, share/po/ca.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Danish file
-
-	* any.pm: changed  ISO_8859-1 TO ISO-8859-1
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings,
-	use it for kdm message
-
-	* diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs
-	size as the check is done before rounding.
-
-	* bootloader.pm (install_grub): altconfigfile only if /boot is not
-	reiserfs :-/
-
-	* tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many
-	modules.cz)
-
-	* install2.pm (main): sets umask (seems like default one is no more 022,
-	kernel change?)
-
-	* Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel
-	(especially for abnt2 (br))
-
-	* install_any.pm (setPackages): also have SOUND set in compssUsersChoice
-	based on pciusbtable
-
-	* share/compssUsers, share/rpmsrate: 
-	  - SOUND is now a flag
-	  - AUDIO is the group
-
-	* lang.pm (load_po): sets $lang::charset to the charset used in the po
-
-2001/04/09  siegel
-
-	* share/po/de.po: fixes
-
-	* Xconfigurator.pm: fixed i18n bug
-
-2001/04/09  yduret
-
-	* standalone/tinyfirewall: button policy (thx gc)
-
-	* standalone/drakgw: deyvounification : remove some un-useful comments in
-	code
-
-2001/04/09  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: corrected
-
-	* standalone.pm: install function now returns the return value of the
-	system.
-
-	* netconnect.pm: corrected buggy cable
-	removed buggy modem screen repetition
-
-2001/04/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed mousedrake (with interactive.pm fixes
-	applied).
-	fixed cancel support.
-	added conditional restart of gpm on mouse configuration change.
-
-	* fs.pm: removed notail option for reiserfs.
-
-	* standalone/keyboarddrake: fixed exit on cancel (should cause trouble in
-	DrakConf only).
-
-	* install_any.pm: added missing package to copy.
-
-	* rescue/tree/etc/oem: fixes of grub installation using hd.img
-	fix the fix for loopback mounting of hd.img.
-	fixed hd.img access right.
-	make kernel22 installed for every oem install...
-	moved some package to closure instead of installed.
-	added some missing packages.
-	added nolock option for nfsmount.
-	added missing package to copy.
-
-2001/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: fix Traktopel Maxim thanks to Kevin Lawton
-
-	* mdk-stage1/Makefile: 8.0beta -> 8.0rc
-
-	* standalone/drakgw: fix for when there is an already existing rc.firewall
-	complies with old format of drakgw so that upgrades will work
-
-	* rescue/tree/etc/oem: fix english thanks to Kevin
-
-2001/04/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* any.pm: changed  ISO_8859-1 TO ISO-8859-1
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings,
-	use it for kdm message
-
-	* interactive.pm (ask_from_treelistf): make it behaves correctly when
-	"cancel" is clicked
-
-	* Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel
-	(especially for abnt2 (br))
-
-	* install2.pm (main): sets umask (seems like default one is no more 022,
-	kernel change?)
-	(main): log the umask
-
-	* devices.pm (entry): add hd[ijkl]*
-
-	* bootloader.pm (install_lilo): better handling of map-drive (there's not
-	always only 2 disks!)
-
-	* lang.pm (load_po): sets $lang::charset to the charset used in the po
-
-2001/04/09  siegel
-
-	* share/po/de.po: fixes
-
-2001/04/09  yduret
-
-	* standalone/drakboot: added lilo/grub
-
-	* bootlook.pm: added lilo/grub mode
-
-2001/04/09  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: removed use install_any
-
-	* tinyfirewall.pm: corrected
-
-	* netconnect.pm: corrected buggy cable
-	removed buggy modem screen repetition
-	corrected bad bug when creating new profile
-
-	* standalone.pm: install function now returns the return value of the
-	system.
-
-	* Makefile: removed install_any
-
-2001/04/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed mousedrake (with interactive.pm fixes
-	applied).
-	fixed cancel support.
-	added conditional restart of gpm on mouse configuration change.
-
-	* rescue/tree/etc/oem: fixed hd.img access right.
-	make kernel22 installed for every oem install...
-	moved some package to closure instead of installed.
-	added some missing packages.
-	added nolock option for nfsmount.
-	added missing package to copy.
-
-	* fs.pm: removed notail option for reiserfs.
-
-	* standalone/keyboarddrake: fixed exit on cancel (should cause trouble in
-	DrakConf only).
-
-	* printer.pm: added Till patch for printer (raw queue and PostScript
-	queue).
-
-	* install_any.pm: added missing package to copy.
-
-2001/04/09  kjx
-
-	* share/po/zh_CN.GB2312.po: translate before 8.0 release
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): log the umask
-
-	* interactive.pm (ask_from_treelistf): make it behaves correctly when
-	"cancel" is clicked
-
-	* devices.pm (entry): add hd[ijkl]*
-
-	* bootloader.pm (install_lilo): better handling of map-drive (there's not
-	always only 2 disks!)
-
-2001/04/09  yduret
-
-	* bootlook.pm: fix, added lilo/grub frame
-	fixed till bug
-
-2001/04/08  dam's  <damien@mandrakesoft.com>
-
-	* rescue/tree/etc/oem, rescue/tree/etc/closurepkgs, install_any.pm: get
-	rid of kisdn
-
-	* tinyfirewall.pm: updated
-	added package installation
-
-	* netconnect.pm: get rid of kisdn
-	updated
-	no more askwarn in wizard mode
-	updated
-
-	* standalone/tinyfirewall, standalone/drakgw, my_gtk.pm,
-	netconnect_consts.pm: updated
-
-	* standalone/net_monitor: removed Data::Dumper
-	typo
-
-	* standalone/draknet: updated
-	typo
-	corrected bad isdn field
-
-2001/04/08  daouda
-
-	* share/rpmsrate: increase quanta weight .
-
-2001/04/08  fabman
-
-	* share/po/es.po: updated spanish .po files
-
-2001/04/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: correct my mistakes on removing some modules from stage1 and
-	stage2 (-> remove only from stage1)
-
-2001/04/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/compssUsers.desktop, standalone/draknet: Fixed some english typos
-
-	* standalone/net_monitor, netconnect.pm: Some English changes
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Fixed some english typos
-	Updated pot file and various po files
-
-2001/04/08  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (write): remove debugging info :-(
-
-	* bootloader.pm (suggest): add option "quiet" to the kernel in fb
-	(requested by chmou)
-
-	* install_steps.pm (afterInstallPackages): remove setting of kde charset
-	in kdeglobals (kde is a grown-up now)
-
-2001/04/08  siegel
-
-	* share/po/de.po: new german version
-	updates
-
-2001/04/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: typo
-	typo
-	net_monitor incorporation
-
-	* standalone/net_monitor, Makefile.config: net_monitor incorporation
-
-2001/04/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po: updated Croatian files
-
-	* share/po/wa.po, share/po/sr.po, share/po/sp.po, share/po/DrakX.pot,
-	share/po/ko.po, share/po/it.po: Updated Korean, Italian, Serbian and
-	Walloon files
-
-2001/04/07  warly
-
-	* share/compssUsers: PCL-CVS release v2_9_9
-	Repository       : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker
-	Working directory: /home/warly/local/share/mdk/gi/perl-install/share/
-	In directory .:
-	              Modified                compssUsers
-	In directory po:
-	patched       Up-To-Date              po/DrakX.pot
-	patched       Up-To-Date              po/ca.po
-	patched       Up-To-Date              po/de.po
-	patched       Up-To-Date              po/hr.po
-	patched       Up-To-Date              po/id.po
-	patched       Up-To-Date              po/it.po
-	patched       Up-To-Date              po/ja.po
-	patched       Up-To-Date              po/ko.po
-	patched       Up-To-Date              po/sp.po
-	patched       Up-To-Date              po/sr.po
-	patched       Up-To-Date              po/vi.po
-	patched       Up-To-Date              po/wa.po
-	
-	  --------------------- End ---------------------
-	  -- last cmd: cvs -f update -d -P --
-
-	* share/rpmsrate: PCL-CVS release v2_9_9
-	Repository       : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker
-	Working directory: /home/warly/local/share/mdk/gi/perl-install/share/
-	In directory .:
-	              Modified                rpmsrate
-	
-	  --------------------- End ---------------------
-	  -- last cmd: cvs -f update -d -P --
-
-2001/04/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff.
-
-2001/04/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: use jeff's suggestions to remove some old stuff
-	Sun Happy Meal only for Sparc
-
-	* mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c:
-	
-	  - do not print warning when we are in AUTOMATIC and insmod failed
-	because of file-not-found in mar file (raid cards, etc)
-	  - print "please include msg from Alt-F3" for this warning message to
-	ease further support
-	  - print pci entry of cards found in te logs
-
-	* mdk-stage1/mkinitrd_helper/mkinitrd_helper.c,
-	mdk-stage1/mkinitrd_helper/Makefile: steal raid_autorun from rh
-
-2001/04/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ca.po, share/po/id.po: Updated Catalan and Indonesian files
-
-	* share/po/ja.po, share/po/vi.po: Updated Japanese and Vietnamese files
-
-2001/04/06  siegel
-
-	* share/po/de.po: updates
-
-2001/04/06  yduret
-
-	* standalone/drakgw: swap cancel/configure button
-
-2001/04/06  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet2: dead code
-
-	* standalone/net_monitor: updated
-
-	* netconnect.pm: be quiet
-
-2001/04/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff.
-	fixed if label does not exists and grub refuse to read.
-
-	* install_steps_interactive.pm: fixed typo for cups checking of
-	installation.
-	fixed "No printer" after configuring cups for remove server.
-	added log for CD medium chosen par user.
-
-	* pkgs.pm: added killing on child process of transaction that have been
-	detached (typically
-	with pid > transaction_pid and parent is 1).
-
-2001/04/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: 
-	  - correct yvounetification in i18n stuff
-	  - remove some remaining debugging printings
-	  - add a bit more of explanations when starting drakgw in wizard mode
-
-	* modules.pm: re integrate some TR net cards
-
-	* mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c:
-	
-	  - do not print warning when we are in AUTOMATIC and insmod failed
-	because of file-not-found in mar file (raid cards, etc)
-	  - print "please include msg from Alt-F3" for this warning message to
-	ease further support
-	  - print pci entry of cards found in te logs
-
-2001/04/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Thai file
-	Updated pot file
-
-2001/04/06  yduret
-
-	* standalone/drakgw: swap cancel/configure button
-
-2001/04/06  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: addde tk like routines
-
-	* netconnect.pm: be quiet
-	correctedInternetAccessTye and ADSLType
-
-	* Makefile: iCorrected missing file install_any.pm. pixel sux.
-
-	* standalone/draknet2: dead code
-
-	* standalone/net_monitor: updated
-	updated
-	updated
-	updated
-	updated
-	added
-
-	* pixmaps/net_d.png, pixmaps/net_c.png: added
-
-	* share/logo-mandrake.png: new icon
-
-2001/04/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed if label does not exists and grub refuse to
-	read.
-
-	* install_steps_interactive.pm: fixed typo for cups checking of
-	installation.
-	fixed "No printer" after configuring cups for remove server.
-	added log for CD medium chosen par user.
-
-	* pkgs.pm: added killing on child process of transaction that have been
-	detached (typically
-	with pid > transaction_pid and parent is 1).
-
-2001/04/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Thai file
-	Updated pot file
-
-2001/04/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove
-	every modules.cz except the
-	biggest one
-
-	* install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab
-	and use it
-
-	* install_any.pm: add write_fstab
-	create install_any::write_fstab and use it
-
-2001/04/06  yduret
-
-	* bootlook.pm: minor fix
-
-	* standalone/drakgw: recoded a embedded && gtk mode
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (fs_options): created (gets codepage and iocharset)
-
-	* common.pm (if_): better logging of the error
-
-2001/04/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove
-	every modules.cz except the
-	biggest one
-
-	* install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab
-	and use it
-
-	* install_any.pm: add write_fstab
-	create install_any::write_fstab and use it
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakboot: 
-	  - fix getting result of fsedit::hds
-	  - cleanup
-
-	* lang.pm (fs_options): created (gets codepage and iocharset)
-
-	* common.pm (if_): better logging of the error
-	(getVarsFromSh): fix for AA="" inspired by chmou the Great (but the
-	Great
-	what?)
-
-	* bootloader.pm (install_grub): small fix
-	(install_lilo): fix lilo's dumbness (when lilo warns about not the first
-	drive, it usually fails)
-
-	* diskdrake.pm (More): created, asks for supermount, rescue pt, reload.
-
-	* install_steps_interactive.pm (addUser): default autologin to first user
-	in beginner
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (autologin): fix
-	ask for autologin
-
-	* install_steps_interactive.pm: ask for autologin
-	(generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img
-	was used. Better have a look at /proc/cmdline
-
-	* bootloader.pm (install_lilo): fix lilo's dumbness (when lilo warns about
-	not the first drive, it usually fails)
-
-	* pkgs.pm, share/rpmsrate: 
-	  - s/PCI/HW/
-	  - add rio500
-
-	* install_any.pm (kernelVersion): fix enormous stupid typo
-
-	* common.pm (getVarsFromSh): fix for AA="" inspired by chmou the Great
-	(but the Great
-	what?)
-
-	* install_steps.pm (exitInstall): oups, report_bug is no more in
-	commands::
-
-	* diskdrake.pm (More): created, asks for supermount, rescue pt, reload.
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show
-	automatically selected
-	packages' to go along with the new description
-
-	* Xconfigurator.pm (write_XF86Config): try to have $_ interpreted
-	(otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'')
-
-	* install_any.pm (kernelVersion): fix enormous stupid typo
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* install_steps.pm (exitInstall): oups, report_bug is no more in
-	commands::
-	(configureXBefore): fix the xkb verification (was broken for things like
-	``de(nodeadkeys)'')
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* any.pm: ask for autologin
-
-	* fs.pm (format_reiserfs): quietly format reiserfs
-
-	* commands.pm: 
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* install_steps_interactive.pm: ask for autologin
-	(generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img
-	was used. Better have a look at /proc/cmdline
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* share/rpmsrate: 
-	  - add ldetect
-	  - the default Aurora chose is the categorizing one
-
-2001/04/05  siegel
-
-	* share/po/de.po: fixed typo
-
-2001/04/05  yduret
-
-	* bootlook.pm: fix pablo mess
-	install autolgin just if we want to autolog :)
-
-2001/04/05  dam's  <damien@mandrakesoft.com>
-
-	* ChangeLog, bootloader.pm: readded passwd. Must verify that it's secure
-	vs msec.
-
-	* my_gtk.pm: added gtksize
-
-2001/04/05  fcrozat
-
-	* share/rpmsrate: No longer propose nautilus-mozilla (required by
-	nautilus)
-	propose nautilus-trilobite (for Eazel services)
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show
-	automatically selected
-	packages' to go along with the new description
-
-	* commands.pm, install_steps_interactive.pm, install_any.pm: 
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* fs.pm (format_reiserfs): quietly format reiserfs
-
-	* Xconfigurator.pm (write_XF86Config): try to have $_ interpreted
-	(otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'')
-
-	* share/rpmsrate: 
-	  - add ldetect
-	  - the default Aurora chose is the categorizing one
-
-	* install_steps.pm (configureXBefore): fix the xkb verification (was
-	broken for things like ``de(nodeadkeys)'')
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-2001/04/05  siegel
-
-	* share/po/de.po: fixed typo
-
-2001/04/05  yduret
-
-	* bootlook.pm: fix pablo mess
-	install autolgin just if we want to autolog :)
-
-2001/04/04  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added SCANNER and PHOTO groups
-
-2001/04/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: make sure to insmod parport_probe alone as it is not
-	available in 2.4 kernel and
-	this this not a problem (silent error).
-	added complete callback to check queue name under cups does contains
-	only letters, numerics or underscore.
-
-	* install_steps_interactive.pm: fixed printer description in summary.
-
-	* install2.pm: added selectPackagesToUpgrade the first time choosePackages
-	is called.
-
-	* Xconfigurator.pm: removed limitation to 24 bits for SiS card, make sure
-	to remove 32 bits depth
-	for such card.
-
-	* detect_devices.pm: fixed parport probe for printer under 2.4 kernel.
-
-	* diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption
-	some times.
-
-	* printer.pm: added die on error of lpadmin.
-
-	* install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sk.po, share/po/az.po: Updated Azeri and Slovak files
-
-2001/04/04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (tv): add ultracam & usbvideo
-	(@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so
-	skip them
-	(@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so
-	skip them
-
-	* install_any.pm (kernelVersion): cleanup
-
-2001/04/04  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_any.pm: kernelVersion mods for PPC
-
-2001/04/04  daouda
-
-	* share/rpmsrate: add gatos for ati tv card .
-
-2001/04/04  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added SCANNER and PHOTO groups
-
-2001/04/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* live_install: unset locale environment for safety
-
-	* detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg
-	(needed for live upgrade so
-	that error message are not printed)
-
-	* diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption
-	some times.
-
-	* install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share
-
-	* any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share
-
-	* install2.pm: added selectPackagesToUpgrade the first time choosePackages
-	is called.
-
-	* install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): better handling for tv, photo and scanner
-
-	* modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on
-	stage1, so skip them
-	  - add photo, tv and scanner
-	  - add pegasus and kaweth modules
-
-2001/04/04  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: typo
-
-2001/04/04  daouda
-
-	* share/rpmsrate: add gatos for ati tv card .
-	reput klyx but in lower weight (2)
-	removed klyx from rpmsrate (bad idea according to pixel )
-	add klyx in install "Office KDE"
-
-2001/04/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* live_install: unset locale environment for safety
-
-	* detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg
-	(needed for live upgrade so
-	that error message are not printed)
-
-	* install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share
-
-	* any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share
-
-	* install2.pm: added selectPackagesToUpgrade the first time choosePackages
-	is called.
-
-	* install_steps.pm: disable frame buffer for Matrox cards.
-
-	* install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): better handling for tv, photo and scanner
-
-	* modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on
-	stage1, so skip them
-	  - add photo, tv and scanner
-	  - add pegasus and kaweth modules
-
-	* share/compssUsers: remove TV (it is a hardware flag)
-
-2001/04/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: keep mount point configuration trhough multi-passes of
-	diskdrake and others.
-
-	* Xconfigurator.pm: prefer XF3 for SiS card.
-
-2001/04/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sr.po, share/po/sp.po, share/po/ko.po: Updated Korean file
-
-2001/04/03  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: do not use isSpecial which should only be used on
-	partitions
-	(main): do not have loopback pseudo hd in hds out of diskdrake
-
-	* modules.pm (load_raw): add the require install_any
-
-	* share/rpmsrate: restore Aurora (i really don't understand what i've done
-	with flag AURORA a month ago) to a simple behaviour
-
-	* install_steps_interactive.pm (choosePackages): do not make a special
-	case for upgrades (was: select the
-	min size, which was on contradiction with profile selection)
-
-	* fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2
-
-	* standalone/mousedrake: fix horrible error (using an undefined $o)
-
-	* share/list: add back mkreiserfs
-
-	* standalone/XFdrake: don't start xfs if skiptest
-
-	* fsedit.pm (get_fstab): restore loopback::loopbacks because hds contains
-	only true
-	hard drives (not pseudo one like raid, loopback and lvm)
-
-	* bootloader.pm (suggest): trap strange error. Should not really fix the
-	pb
-
-	* install_steps.pm (setupBootloaderBefore): nicer Aurora presence
-	detetection
-
-	* lang.pm (charset): fix for chineese which have charset in the name
-
-	* Makefile: no more special case for mkreiserfs (can be done via -v 1)
-
-	* install_steps_gtk.pm (choosePackagesTree): better name than "Automatic
-	dependencies"
-
-	* install_any.pm (setPackages): don't preselect profiles in upgrade
-	(setPackages): handle Flag:<theflag>
-	(setPackages): install kernel22 if install kernel is a 2.2
-
-	* lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong
-	(didn't
-	propose to format it)
-	protect the loading of module lvm-mod
-
-2001/04/03  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_interactive.pm, mouse.pm: PPC keyboard/mouse button
-	emulation
-
-2001/04/03  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: a lot of bugfixs
-	corrected bad flag test
-	corrected bad priority
-
-	* standalone/draknet: typo
-	bug fixes
-	removed debugging messages and Data::Dumper
-	corrected bad flag test
-
-2001/04/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po, share/po/DrakX.pot: Updated Vietnamese file
-
-2001/04/03  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_raw): add the require install_any
-
-	* share/rpmsrate: restore Aurora (i really don't understand what i've done
-	with flag AURORA a month ago) to a simple behaviour
-
-	* lang.pm (charset): fix for chineese which have charset in the name
-
-	* install_steps.pm (setupBootloaderBefore): nicer Aurora presence
-	detetection
-
-	* Makefile: no more special case for mkreiserfs (can be done via -v 1)
-
-	* install_steps_interactive.pm (choosePackages): do not make a special
-	case for upgrades (was: select the
-	min size, which was on contradiction with profile selection)
-
-	* fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2
-
-	* install_steps_gtk.pm (choosePackagesTree): better name than "Automatic
-	dependencies"
-
-	* install_any.pm (setPackages): don't preselect profiles in upgrade
-	(setPackages): handle Flag:<theflag>
-	(setPackages): install kernel22 if install kernel is a 2.2
-
-	* share/list: add back mkreiserfs
-
-	* standalone/XFdrake: don't start xfs if skiptest
-
-	* lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong
-	(didn't
-	propose to format it)
-	protect the loading of module lvm-mod
-
-2001/04/02  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: corrected petite's mistake
-
-	* netconnect.pm: protecting against non existent files
-
-2001/04/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/make_boot_img, mdk-stage1/.cvsignore: fix
-	comply to all.kernels policy
-
-	* tools/make_mdkinst_stage2: fix remove of alternate cz modules
-
-2001/04/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: Updated Czech file
-
-	* lang.pm: codepage option to mount requires only numeric values, eg "437"
-	and not "cp437"
-	Changed accordingly in the lists
-
-	* share/rpmsrate: Install latin2 Postscript fonts for latin2 locales,
-	install fonts-ttf-thai for Thai locale
-
-2001/04/02  Pixel  <pixel@mandrakesoft.com>
-
-	* c/Makefile: small cleanup for pcmcia_probe.c
-
-	* tools/Makefile (install): s/-r/-rf/
-
-	* install_any.pm (setPackages): s/reiserfs-utils/reiserfsprogs/
-	(setPackages): install imwheel if nbuttons > 3
-
-	* c/Makefile.PL: small cleanup for pcmcia_probe.c
-	don't use pcmcia_probe.o from stage1, better compile it here, otherwise
-	perl-install require mdk-stage1 to do compiled => circular dependency
-
-	* Makefile: ignore dams or at least dams errors
-
-	* c/.cvsignore: add pcmcia_probe.c
-
-2001/04/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/make_rescue_img: fix pixelization (aka take advantage of
-	all.kernels/.main)
-
-2001/04/02  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/Makefile (install): s/-r/-rf/
-
-2001/03/30  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/Makefile (install): fix the globbing for packdrake.pm and
-	rpmtools.pm
-
-2001/03/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/drvinst: test for "Card:" and not install, some videoboards are
-	not reported as DISPLAY_VGA :-(
-
-	* tools/make_mdkinst_stage2, docs/HACKING, rescue/make_rescue_img,
-	mdk-stage1/pci-resource/update-pci-ids.pl, docs/README: support more
-	than one boot kernel :-)
-
-	* rescue/list.i386: add reiserfsck
-
-2001/03/29  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: bad message at the end if kernel2.4
-
-	* netconnect.pm: added missing Device in Ethx when saving/loading
-
-	* standalone/draknet: translation
-
-2001/03/28  dam's  <damien@mandrakesoft.com>
-
-	* standalone/tinyfirewall: typo
-
-	* interactive_gtk.pm: corrected pixel shit if embedded
-
-	* standalone/draksec: embedded mode
-
-	* standalone/draknet: corrected gtkpng in gtkwpm
-	added translation
-
-	* bootlook.pm: cute button box
-
-	* tinyfirewall.pm: workaround to make it work if kernel 2.4
-
-2001/03/28  fcrozat
-
-	* share/rpmsrate: gmc is back in standard GNOME install, for people with
-	existing home
-
-2001/03/28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* standalone/mousedrake, mouse.pm, standalone/XFdrake: fixed for
-	standalone XFdrake and mousedrake (multi-mouse and
-	correct probe (USB)).
-
-	* Xconfig.pm: re-fix mouse fix.
-	fixed wrong mouse probe.
-	fixed for standalone XFdrake and mousedrake (multi-mouse and
-	correct probe (USB)).
-
-	* Xconfigurator.pm: restore multi mouse support for XF3.
-
-2001/03/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/ca.po, share/po/tr.po: Updated Catalan, Danish,
-	Finnish, Croatian and Turkish files
-
-	* share/po/sk.po, share/po/ko.po: Updated Finnish, Korean and Slovak files
-
-	* share/po/az.po: Updated Azeri and Danish files
-
-	* share/po/fi.po: Updated Catalan, Danish, Finnish, Croatian and Turkish
-	files
-	Updated Finnish, Korean and Slovak files
-
-	* share/po/da.po: Updated Catalan, Danish, Finnish, Croatian and Turkish
-	files
-	Updated Azeri and Danish files
-
-2001/03/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: add fstab in the log
-
-	* interactive_gtk.pm: better default_size setting
-
-	* commands.pm: fix typo
-	add fstab in the log
-
-	* install_gtk.pm (test_mouse): ensure the test mouse is not too big
-
-2001/03/28  warly
-
-	* share/rpmsrate: add some commercial apps
-
-2001/03/27  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: added kill USR2 before main
-
-	* share/help.png: changed help button
-
-	* share/help.xpm: changed help
-
-	* tinyfirewall.pm: workaround to make it xork.
-
-2001/03/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image.
-
-	* Xconfigurator.pm: fixed mouse support for XF3, only one mouse supported
-	currently.
-
-2001/03/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers
-
-2001/03/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/i18n_compssUsers, share/po/vi.po, share/po/fi.po,
-	share/po/br.po, share/po/DrakX.pot, share/po/ko.po, share/po/ja.po,
-	share/po/wa.po, share/po/de.po, share/po/id.po: Updated Vietnamese,
-	Indonesian, Japanese, Korean and Walloon files
-	changed i18n_compssUsers to make "path" i18n'able
-
-2001/03/27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: warnAboutNaughtyServers
-	(setPackages): default profiles selection to GNOME, KDE, CONFIG
-
-	* install_steps_interactive.pm: warnAboutNaughtyServers
-	(summary): fix displaying of printer configured
-
-	* pkgs.pm: warnAboutNaughtyServers
-
-	* install_steps_gtk.pm (installPackages): catch the no png file exception
-	(in case warly is dumb again)
-
-	* my_gtk.pm: try to fix displaying in draksec
-	(create_box_with_title): save the box_size in field "box_size"
-
-	* install2.pm, any.pm: remove use of Bastille. get back to the good state
-	we had :)
-
-	* interactive_gtk.pm: try to fix displaying in draksec
-
-	* share/rpmsrate: move back Bastille-Curses-module to CONFIG
-	  - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is
-	LOCALES"zh"
-	  - raise WindowMaker
-	  - add xfce
-	  - am-utils is a server
-	  - raise some stuff in CONFIG to have stuff there
-	  - remove drakxtools from CONFIG (DrakConf requires drakxtools)
-	  - DrakConf from 5 to 4
-
-	* lang.pm (langsLANGUAGE): give the list of languages
-
-2001/03/27  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_interactive.pm: change verbage on bootloader warning
-
-2001/03/27  siegel
-
-	* share/po/de.po: minor typo-fixes
-
-2001/03/27  dam's  <damien@mandrakesoft.com>
-
-	* share/help.png: changed help button
-
-	* share/help.xpm: changed help
-
-2001/03/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm, pkgs.pm: fixed too early erasing of old rpmlib db. now
-	postponed at end of install
-	and only if rpm-4.0 or above has been installed.
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image.
-
-	* Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm, Xconfig.pm: added
-	support for two mice (laptop). The second mice is generally PS/2 as
-	probe can says it is present.
-
-2001/03/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers
-
-2001/03/27  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm, install2.pm: remove use of Bastille. get back to the good state
-	we had :)
-
-	* install_any.pm: warnAboutNaughtyServers
-	(setPackages): default profiles selection to GNOME, KDE, CONFIG
-
-	* share/rpmsrate: move back Bastille-Curses-module to CONFIG
-	  - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is
-	LOCALES"zh"
-	  - raise WindowMaker
-	  - add xfce
-	  - am-utils is a server
-	  - raise some stuff in CONFIG to have stuff there
-	  - remove drakxtools from CONFIG (DrakConf requires drakxtools)
-	  - DrakConf from 5 to 4
-
-	* install_steps_interactive.pm: warnAboutNaughtyServers
-	(summary): fix displaying of printer configured
-
-	* lang.pm (langsLANGUAGE): give the list of languages
-
-	* pkgs.pm: warnAboutNaughtyServers
-
-	* install_steps_gtk.pm (installPackages): catch the no png file exception
-	(in case warly is dumb again)
-
-2001/03/27  siegel
-
-	* share/po/i18n_compssUsers: i18n group names
-
-	* share/po/de.po: minor typo-fixes
-	new german version
-
-2001/03/26  daouda
-
-	* share/rpmsrate: add mandrake_desk and rootfiles to SYSTEM (rpmsrate)
-
-2001/03/26  fcrozat
-
-	* share/rpmsrate: Install xscreensaver when installing GNOME
-
-2001/03/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: first attempt at pixelization of code (till's cups
-	patches)
-
-2001/03/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/wa.po: Updated Croatian, vietnamese and Walloon
-	files
-
-	* share/po/vi.po: Updated Croatian, vietnamese and Walloon files
-	Updated Portuguese, Swedish and Thai files
-
-	* share/po/pt.po, share/po/th.po, share/po/es.po, share/po/de.po,
-	share/po/sv.po: Updated Portuguese, Swedish and Thai files
-
-2001/03/25  Pixel  <pixel@mandrakesoft.com>
-
-	* http.pm (getFile): verify the return value of the server. If not 200
-	(aka Ok),
-	return undef
-
-	* install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp
-	and libqtcups2 for kups in
-	pkg_install_if_requires_satisfied
-
-2001/03/25  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/25  fabman
-
-	* share/po/es.po: updated spanish .po file
-
-2001/03/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: Updated Korean file
-
-	* share/po/sv.po: Updated Swedish file
-
-2001/03/25  Pixel  <pixel@mandrakesoft.com>
-
-	* http.pm (getFile): verify the return value of the server. If not 200
-	(aka Ok),
-	return undef
-
-	* install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp
-	and libqtcups2 for kups in
-	pkg_install_if_requires_satisfied
-
-	* any.pm (ask_users): fix dead-loop
-
-	* bootloader.pm (suggest): add entry for nt
-
-2001/03/25  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po: Updated Vietnamese file
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: remove the "use common" which
-	is unneeded (and "member" of merge2pcitable
-	was clashing)
-
-	* any.pm (ask_users): when "Done" is pressed, do "Accept User" if a user
-	is given.
-
-	* install_steps.pm (addUser): disable_user_view (in kdm/gdm) if no users
-
-	* install_any.pm (disable_user_view): created, takes care of gdm too
-	(taken from msec)
-
-	* mouse.pm (detect): fix francois... uh, no too hard. easier to fix
-	francois's bugs ;pp
-
-	* timezone.pm (%l2t): fix for fuzzyChoice
-
-	* share/keyboards.tar.bz2: 
-	  - readding with -kb
-	  - fixing permissions on xmodmap.kr
-	remove before adding again with -kb
-
-	* modules.pm: have natsemi in network.img
-
-2001/03/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Azeri file
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (detect): fix francois... uh, no too hard. easier to fix
-	francois's bugs ;pp
-
-	* timezone.pm (%l2t): fix for fuzzyChoice
-
-	* modules.pm: 
-	  - add missing modules (now in sync with pcitable)
-	  - add 'media' class
-	  - cleanup
-
-2001/03/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Azeri file
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (copy_advertising): fix escaping $f causing perl to
-	segfault :-(
-	(copy_advertising): handle i18n'ed advertising
-
-	* pkgs.pm: cleanup
-
-	* modules.pm: 
-	  - add missing modules (now in sync with pcitable)
-	  - add 'media' class
-	  - cleanup
-
-2001/03/24  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: corrected bad exited. reincorporated some ugly code,
-	need fixing
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (copy_advertising): handle i18n'ed advertising
-
-	* modules.pm (read_stage1_conf): cleanup parport stuff obsolote in kernel
-	2.4
-
-2001/03/23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed screen id for Device to be present whenever the
-	same BusID is used.
-	added multiple tablet support (wacom), moved usb probe for mouse and
-	tablet
-	at the beginning.
-
-	* printerdrake.pm: Do not ask to configure a printer if standalone,
-	previously only for embended.
-
-	* Xconfig.pm: fixed typo for wacom.
-	added multiple tablet support (wacom), moved usb probe for mouse and
-	tablet
-	at the beginning.
-
-	* mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added
-	multiple tablet support (wacom), moved usb probe for mouse and tablet
-	at the beginning.
-
-2001/03/23  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf_no_check): fix the fix fix fix
-	(ask_from_listf_no_check): fix the fix fix
-
-	* common.pm (formatError): created
-
-	* network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in
-	DHCP/BOOTP
-
-	* diskdrake.pm (try): format the error (no more "at line ...")
-	(Add2LVM): "new" was not i18n'ed
-
-	* install_steps_interactive.pm (exitInstall): no "cancel" button
-
-	* partition_table.pm: add Empty to bad_types
-
-	* fsedit.pm (change_type): When changing a partition type from ext2fs to
-	Linux RAID
-	(or LVM), the mount point should be removed.
-
-2001/03/23  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/23  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: corrected bad translation
-	correctedd typo
-	updated
-	code cleaning
-	tinyfirewall now works.
-
-	* Makefile.config: added tinyfirewall
-
-	* any.pm, mouse.pm: added /dev/modem in modem list selection
-
-	* standalone/drakxconf: added tinyfirewall entry
-
-	* standalone/tinyfirewall: added update code
-	updated wrapper to launch tinyfirewall in embedded mode
-
-	* netconnect.pm: added /dev/modem in modem list selection
-	netconnect doesn't write the file 1
-
-2001/03/23  fcrozat
-
-	* share/rpmsrate: nautilus-mozilla and xalf are installed by default in
-	GNOME
-	gmc is not installed by default in GNOME
-	gabber gaim are moved to instant messaging
-	gcombust in moved to GNOME CD burner
-	gtm is installed by GNOME/File transfer
-	mozilla is installed by default as www browser
-	galeon is installed by default as www browser for GNOME
-
-2001/03/23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/syncrpms: added size-stamp test to copy identical file in version,
-	release.
-
-	* Xconfig.pm: fixed typo for wacom.
-	added multiple tablet support (wacom), moved usb probe for mouse and
-	tablet
-	at the beginning.
-
-	* Xconfigurator.pm: added multiple tablet support (wacom), moved usb probe
-	for mouse and tablet
-	at the beginning.
-	fixed wrong usage of Screen keyword in Device section, should be present
-	and
-	reseted for any multi head card with only one BusID.
-
-	* mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added
-	multiple tablet support (wacom), moved usb probe for mouse and tablet
-	at the beginning.
-
-2001/03/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/es.po, share/po/de.po, share/po/fi.po: Added Vietnamese file
-	Updated Finnish file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Added Vietnamese file
-
-2001/03/23  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: ifix the dams stuff
-
-	* install_steps_interactive.pm (exitInstall): no "cancel" button
-
-	* share/po/i18n_compssUsers: fix for better compliance with po format
-
-	* netconnect.pm: ifix the dams stuff
-	cleanup and enable gzip'ed isdn.db
-
-	* Makefile: gzip ldetect-lst files
-
-	* modules.pm: add i810_audio (still need a script to add missing one and
-	keep in sync)
-
-	* bootloader.pm (suggest_floppy): don't add an entry for non-fd0 drives
-
-	* interactive.pm (ask_from_listf_no_check): fix the fix fix fix
-	(ask_from_listf_no_check): fix the fix fix
-	(ask_from_listf_no_check): fix the bad fix
-
-	* common.pm (formatError): created
-	(openFileMaybeCompressed, catMaybeCompressed): added
-	(getVarsFromSh): take care of comments
-
-	* network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in
-	DHCP/BOOTP
-
-	* partition_table.pm: add Empty to bad_types
-
-	* mouse.pm (detect): never probe psaux (workaround for kernel/xfree bug)
-
-	* fsedit.pm (change_type): When changing a partition type from ext2fs to
-	Linux RAID
-	(or LVM), the mount point should be removed.
-
-	* detect_devices.pm (isUSBFDUDrive, usbfdus): removed, doesn't scale
-	(isFloppyOrHD): floppy type is 'fd', not 'floppy'
-	(stringlist): nicer (a la new lspcidrake)
-
-	* Xconfigurator.pm: enable use of gzip'ed Cards+, CardsNames and
-	MonitorsDB
-
-	* diskdrake.pm (try): format the error (no more "at line ...")
-	(Add2LVM): "new" was not i18n'ed
-
-2001/03/23  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mouse.pm, bootloader.pm: mods to create/move image, to /export for PPC,
-	use vmlinux for PPC
-	prepend of_dev to initrd stanza in yaboot.conf
-	add 1-button mouse for PPC
-
-2001/03/23  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/22  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* tools/i386/netboot/stage1.rtl8139, tools/i386/netboot/stage2.rtl8139:
-	Add 8139 grub stage.
-
-2001/03/22  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: corrected mapn
-
-	* standalone/draknet: removed use Data::Dumper
-
-	* netconnect.pm: removed mail informat oin
-	comment update
-
-	* tinyfirewall.pm: removed use Data::Dumper
-	working on tinyfirewall
-
-2001/03/22  fabman
-
-	* share/po/es.po: changed "swap" for "intercambio" in the spanish .po
-	files
-	updated DrakX, menudrake and urpmi es.po files
-
-2001/03/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed wrong access to undefined value promoted to
-	empty array reference.
-
-2001/03/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/probing.c, mdk-stage1/tools.h: 
-	  - fix detection of more than 3 scsi attached devices
-	  - cleaner code for cmp of ptr against static strings
-
-2001/03/22  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/mousedrake: remove test ugliness of dams
-
-	* c/Makefile.PL: no pcmcia_probe in drakxtools
-
-	* modules.pm (load_thiskind): indent as it should be
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): fix the message
-	which was uptodate only for
-	sparc :-(
-
-	* Xconfigurator.pm: no need for "use Data::Dumper;"
-
-2001/03/22  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* modules.pm: no imm,ppa PPC, scan mesh,mac53c94 scsi only, pmac should
-	have been mace
-
-2001/03/22  yduret
-
-	* bootlook.pm: mapn works tx dams
-	nmap
-	added mapn fun to reduce code.. testing it
-	added install of rpm
-	xpm  png files
-
-	* pixmaps/hori.png, pixmaps/gmon.png, pixmaps/tradi.png, pixmaps/hori.xpm,
-	pixmaps/verti.png, pixmaps/gmon.xpm, pixmaps/tradi.xpm,
-	pixmaps/verti.xpm: convert xpm to png
-
-2001/03/21  dam's  <damien@mandrakesoft.com>
-
-	* standalone/tinyfirewall, tinyfirewall.pm: new tinyfirewall conf tool
-
-	* netconnect.pm: corrected /etc/sysconfig/network-scripts/net_up.* bug
-
-2001/03/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm: added pci id reference.
-
-	* c/stuff.xs.pm: added support for pci id extraction.
-
-	* Xconfigurator.pm: fixed wrong XFree4 version reference.
-	fixed null string in monitor identifier.
-	added multi-head support in XFdrake.
-
-2001/03/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: honour embedded mode
-
-	* share/compssUsers: move NETWORKING_FILE (contains stuff for nfs
-	mounting..) from Internet
-	Station to Network Computer
-
-2001/03/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/de.po,
-	share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated
-	Croatian and Serbian files
-
-	* share/po/sp.po, share/po/sr.po: Updated Serbian files
-	Updated Croatian and Serbian files
-
-	* share/po/az.po: Updated Azeri file
-	Updated Croatian and Serbian files
-
-	* share/po/sk.po: Updated Azeri and Slovak files
-	Updated Croatian and Serbian files
-
-	* lang.pm: Added fields to charsets table holding info for mount
-	(iocharset and
-	codepage mount options)
-
-2001/03/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (g_default_packages): nice warning if mount in vfat fails
-
-	* share/rpmsrate: move webmin to CONFIG
-	remove ipchains and iptables, raise gfcc
-
-	* docs/README: add cvs howto
-
-	* install_steps_interactive.pm (summary): fix
-
-	* detect_devices.pm: old code
-
-	* bootloader.pm (install_lilo): ensure labels don't contain spaces, lilo
-	doesn't like them
-	(add_kernel): cleanup
-	(suggest): make it work with kernel22-secure and no kernel22
-
-	* modules.pm (when_load): move the alias sound to when_load, don't check
-	ppc as it
-	could be used for non-ppc
-	(load_thiskind): fix pb causing imm,ppa,usb-storage to be tested for
-	every
-	load_thiskind, not only scsi one
-
-	* c/stuff.xs.pm (from_utf8): as pablo said...
-
-2001/03/21  siegel
-
-	* share/po/de.po: new german version
-	new german version
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (@drivers_by_category): if_ization
-	(load_thiskind): cleanup
-
-2001/03/21  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (add_kernel): cleanup
-	(suggest): make it work with kernel22-secure and no kernel22
-
-	* share/rpmsrate: remove ipchains and iptables, raise gfcc
-
-2001/03/20  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm: no wizard if warning
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix pcmcia functions only on x86
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-
-	* modules.pm (@drivers_by_category): if_ization
-	(load_thiskind): cleanup
-
-	* any.pm, install2.pm, share/rpmsrate: use bastille backend
-
-	* c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86
-
-	* install_steps.pm, install_any.pm: 
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-
-2001/03/20  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* modules.pm, install_steps_interactive.pm, any.pm: make_boot_img: add
-	routine for - PPC
-	any.pm: double "Append" entry in expert mode for yaboot.conf - PPC
-	install_steps_interactive: setup dmasound - PPC
-	modules.pm: load Mac hardware modules - PPC
-
-2001/03/20  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bug in reading resolv.conf, and changed chmod
-	for net_cnx_*
-
-	* interactive.pm: no wizard if warning
-
-	* standalone/draknet: added update after {dis}connecting
-
-2001/03/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* diskdrake.pm: fix formatting of raid
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: use bastille backend
-	  - add nautilus
-
-	* install_steps_interactive.pm: fix pcmcia functions only on x86
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-	(setupSCSI): don't pcmcia_probe if testing
-	  - tellAboutProprietaryModules moved to setupSCSI
-	  - miscellaneous step re-enabled, called Security
-	  - pcmcia_probe moved to setupSCSI, skipped in noauto
-
-	* any.pm: use bastille backend
-
-	* install2.pm: use bastille backend
-	  - tellAboutProprietaryModules moved to setupSCSI
-	  - miscellaneous step re-enabled, called Security
-	  - pcmcia_probe moved to setupSCSI, skipped in noauto
-	have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the
-	parameter any more)
-
-	* netconnect.pm (modem_detect_backend): cleanup
-
-	* c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86
-	have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the
-	parameter any more)
-
-	* Makefile: install cardmgr
-
-	* install_any.pm: 
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-	(setPackages): install usbd in case of usb
-
-	* install_steps.pm: 
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-
-2001/03/20  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* any.pm, netconnect.pm, detect_devices.pm: any.pm: enable module load PPC
-	detect_devices.pm: forgot to remove commented code after test
-	netconnect.pm: load macserial module for PPC
-
-2001/03/20  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet, netconnect.pm: improved connection windows, and
-	loading / saving of /etc/sysconfig/network-scripot/net�cnx*
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: 
-	  - add nautilus
-
-	* install_any.pm (setPackages): install usbd in case of usb
-
-	* Makefile: install cardmgr
-
-2001/03/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* fsedit.pm: fix loopback appearing twice in format partition
-
-	* diskdrake.pm: fix "loopback" name of loopback tab in diskdrake
-
-2001/03/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: updated korean file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files
-
-2001/03/19  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (computeGroupSize): fix hacks, better hacks
-	(saveCompssUsers): fix
-
-	* install_steps_interactive.pm (chooseGroups):
-	  - make the computed size work
-	  - unselectAll when a profile is unselected
-
-	* interactive_gtk.pm (ask_from_entries_refW): better sizing in case of
-	scrolls
-
-2001/03/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC
-
-2001/03/19  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected graphical layout for newbies
-
-	* netconnect.pm: added net_cnx_{up, down} save
-
-2001/03/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: updated korean file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files
-
-2001/03/19  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (computeGroupSize): fix hacks, better hacks
-	(saveCompssUsers): fix
-
-	* share/rpmsrate: 
-	  - add rxvt-CJK
-	  - exchange xterm and rxvt
-	  - move bc from SCIENCES to SYSTEM
-
-	* interactive_newt.pm (ask_from_entries_refW):
-	  - ensure the width is less than $width - 7 (in french and 80x25, the
-	treelist was too big)
-	  - if term is very big, use 10 lines instead of 5
-	  - if no button is asked, but one in any case otherwise it's buggy
-
-	* install_steps_interactive.pm (chooseGroups):
-	  - make the computed size work
-	  - unselectAll when a profile is unselected
-
-	* interactive.pm (ask_from_listf_no_check): fix fix
-	(ask_from_listf_no_check): fix the filtering of exceptions
-
-2001/03/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC
-
-2001/03/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/lomount.h, mdk-stage1/lomount.c, mdk-stage1/disk.c: fix for
-	hd-install when you provide a not valid ISO (cd #2 for example)
-
-	* mdk-stage1/frontend.h, mdk-stage1/minilibc.h, mdk-stage1/stage1.h,
-	mdk-stage1/log.h: use some help with __attribute__
-
-2001/03/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/tree/etc/rc.sysinit: load sr_mod and sd_mod at startup
-
-	* mdk-stage1/Makefile.mkinitrd_helper, mdk-stage1/.cvsignore: sync
-
-	* mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in
-	editing ask_from_entries in stdio mode
-
-	* mdk-stage1/pci-resource/Makefile: do not use marfiles for deps
-
-2001/03/17  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (write_langs): in case of empty %_install_langs, don't write it
-
-	* install_steps.pm (pkg_install_if_requires_satisfied): better logging
-
-	* share/rpmsrate: add gpm & evolution
-
-2001/03/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/insmod-busybox/utility.c: fix insmod calling realloc(0,0) to
-	work with dietlibc
-
-	* mdk-stage1/insmod-busybox/Makefile: also build standalone insmod-DIET
-	for testing purposes..
-
-	* mdk-stage1/mkinitrd_helper/Makefile: bump version to 1.0.1 for new
-	mkinitrd package release
-
-	* mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in
-	editing ask_from_entries in stdio mode
-
-2001/03/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-	* share/keyboards.tar.bz2: Added a Korean keyboard, fixed bug in Japanese
-	keyboard
-
-	* keyboard.pm: Added choice of Korean keyboard
-
-2001/03/17  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (write_langs): in case of empty %_install_langs, don't write it
-
-	* install_steps.pm (pkg_install_if_requires_satisfied): better logging
-
-	* share/rpmsrate: add gpm & evolution
-
-2001/03/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/Makefile: refine deps
-
-	* mdk-stage1/mkinitrd_helper/mkinitrd_helper.c, mdk-stage1/Makefile,
-	mdk-stage1/mkinitrd_helper/Makefile: write down mkinitrd_helper
-
-	* mdk-stage1/insmod-busybox/insmod.c: force load
-
-2001/03/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): set flag "TV" when bttv hardware is there
-
-	* share/compssUsers, share/rpmsrate: move out TV from VIDEO
-
-	* diskdrake.pm (Type): fix the code verifying size >32 for reiserfs
-
-	* modules.pm (write_conf): better logging
-
-	* c/stuff.xs.pm: add from_utf8
-
-	* c/stuff.pm (headerGetEntry): use from_utf8 on group, summary and
-	description
-
-2001/03/16  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* tools/ppc/magic, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/convert,
-	tools/ppc/yaboot, tools/ppc/mapping: gi/tools/ppc/convert, magic,
-	mapping, mkhybrid-1.12b5.4, yaboot - re-add - my bad
-	gi/tools/ppc/convert, magic, mapping, mkhybrid-1.12b5.4, yaboot -
-	remove/re-add - did not use -kb switch - thx Pixel
-
-2001/03/15  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: SiS card are no more prefered for XF3.
-	added standalone support to prefer XF3 or XF4 to
-	keep current used server version.
-
-	* standalone/XFdrake: remove duplicate begin label.
-	take care of existing configuration.
-
-2001/03/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: skip dc395x_trm on stage1
-	dc395x_trm is back in 2.4
-
-	* share/compssUsers: try to enhance
-
-2001/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-2001/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm, Xconfigurator.pm: andre@node1583e.a2000.nl says
-	this is not needed anymore :)
-
-2001/03/15  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* tools/ppc/magic, tools/ppc/convert, tools/ppc/iboot,
-	tools/ppc/mkINSTALLCD, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/yaboot,
-	tools/ppc/mapping: gi/tools/ppc/convert, magic, mapping, mkINSTALLCD,
-	mkhybrid-1.12b5.4, yaboot: create PPC CD
-
-	* install_steps_interactive.pm, detect_devices.pm, bootloader.pm:
-	bootloader.pm, detect_devices.pm, install_steps_interactive.pm: changed
-	temporary file read/write per Pixel
-
-	* Xconfigurator.pm: force 1024x768 on Powerbook
-
-	* tools/ppc/README: README: README for creating PPC boot CD
-
-2001/03/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: changed label + profile before types..
-
-2001/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po,
-	share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/Changelog, share/po/sk.po,
-	share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po:
-	corrected the script and updated po files
-
-2001/03/14  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: keep only one Development entry
-
-	* install_steps_gtk.pm, pkgs.pm: fix the compssUsers interpretation
-
-	* bootlook.pm: fix for perl2fcalls
-
-	* install_steps_interactive.pm (chooseGroups): disable the size display as
-	it is wrong (for the beta2)
-
-2001/03/14  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_gtk.pm,
-	partition_table_mac.pm, bootloader.pm: fix bootstrap partition
-	creation/tracking
-	allow Xpmac to launch in 2 modes based on cmdline
-
-2001/03/14  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: changed label + profile before types..
-
-2001/03/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed unselect management of choice, propagate unselection
-	correctly to all
-	packages requiring unselected package.
-
-	* install_any.pm: use LD_LOADER when invoking parshedlist.
-
-2001/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po, share/po/nl.po: updated Norwegian file
-
-	* share/locales.tar.bz2, share/gconv.tar.bz2, share/list,
-	share/fonts.tar.bz2: new fonts and locale files
-
-	* share/po/ko.po: Fixed email of Korean translator
-	updated Korean file
-
-	* install_steps_interactive.pm, install_gtk.pm, lang.pm, keyboard.pm:
-	completed language list
-	completed language->keyboard guessing list
-	aesthetic changes to an English message (removed \n and let gtk+
-	do the formatting, it is nicer)
-
-	* share/po/az.po: Updated Azeri file
-
-2001/03/14  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: fix the compssUsers interpretation
-	(readCompssUsers): change the key of compssUsers, added "label"
-	(computeGroupSize): fix bug
-	(computeGroupSize): fix logging
-
-	* share/gconv.tar.bz2: moved to share/list
-
-	* bootlook.pm: fix for perl2fcalls
-
-	* share/rpmsrate: CLIENT & SERVER is prohibited
-
-	* timezone.pm: 
-	  - add many timezones
-	  - defaults to GMT
-	  - verifier added
-
-	* install_steps_gtk.pm: fix the compssUsers interpretation
-	(choosePackagesTree): fix
-
-	* common.pm (bestMatchSentence, bestMatchSentence2): in wantarray, return
-	the number
-	of matched words/characters
-
-	* share/compssUsers: keep only one Development entry
-	CLIENT & SERVER is prohibited
-
-	* install_steps_interactive.pm (chooseGroups): disable the size display as
-	it is wrong (for the beta2)
-	(chooseGroups): add path for seperating groups, use "label" for the
-	group text
-
-	* Makefile: remove gconv
-
-2001/03/13  siegel
-
-	* share/po/de.po: Fixed typos.
-
-2001/03/13  siegel
-
-	* share/po/de.po: Fixed typos.
-
-2001/03/13  dam's  <damien@mandrakesoft.com>
-
-	* share/help.png: changed
-
-2001/03/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm, install_steps_gtk.pm: compss is deprecated. use compssUsers
-	for the tree
-
-	* standalone/drakgw: pixelization
-
-	* share/rpmsrate: HDF can't be at the beginning of the line or it will be
-	taken as a flag
-	moved icewm to SYSTEM with !KDE !GNOME
-
-	* pkgs.pm: compss is deprecated. use compssUsers for the tree
-	(readCompssUsers): get the "path"
-
-	* install_steps.pm: compss is deprecated. use compssUsers for the tree
-	renamef created and used
-
-	* detect_devices.pm (burners): don't use cdroms() which return scdX for
-	ide burners, and
-	isBurner don't use the same technique. so use get() and grep for type
-	"cdrom"
-
-	* install_any.pm: compss is deprecated. use compssUsers for the tree
-	(setPackages): set {compssUsersChoice}{PCMCIA} if hasPCMCIA
-	renamef created and used
-
-	* install_steps_interactive.pm: compss is deprecated. use compssUsers for
-	the tree
-	(chooseGroups): fix to get back the icons
-	(chooseGroups): size computed should work
-
-	* common.pm: renamef created and used
-
-2001/03/13  siegel
-
-	* share/po/de.po: new german translation
-
-2001/03/13  warly
-
-	* share/compssUsers: fix {W,w}orkstation
-	remove ^Server and ^Development
-
-2001/03/13  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakgw: pixelization
-
-	* install_steps_interactive.pm (chooseGroups): size computed should work
-
-	* share/rpmsrate: moved icewm to SYSTEM with !KDE !GNOME
-
-	* install_steps.pm, common.pm, install_any.pm: renamef created and used
-
-2001/03/12  dam's  <damien@mandrakesoft.com>
-
-	* Makefile: removed wizard pixmap from install
-
-	* pixmaps/wiz_internet.png, pixmaps/wiz_internet_left.png: updated
-	added pixmap for wizard
-
-	* my_gtk.pm: new wizard layout, with pixmaps.
-	added ugly workaround for ugly Hseparator
-
-	* share/step-red.png, share/step-orange.png, share/step-orange-click.png,
-	share/step-green-click.png, share/step-green.png, share/step-red-on.png,
-	share/step-orange-on.png, share/step-green-on.png,
-	share/step-green_s.png, share/step-red-click.png: removing bad png
-	files...
-
-	* share/help.png: new help button. blah
-
-	* install_any.pm: typo
-
-	* pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png: updated
-
-	* netconnect.pm: corrected askokcancel -> askyesorno
-
-	* interactive.pm: corrected bad okcanel in wizard mode
-
-	* install_steps_interactive.pm: added $::isInstall
-
-	* share/logo-mandrake_trans.png: new logo for other themes
-
-	* services.pm: removed use Data::Dumper
-	corrected bug in display
-
-2001/03/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm, lang.pm, commands.pm, detect_devices.pm, pkgs.pm,
-	live_install2: fixed live update between GLIBC 2.1 and GLIBC 2.2. should
-	work for other
-	combination but not tested. fixed locale usage and gtk environment
-	interaction (added LOCPATH, GCONV_PATH and GTK_EXE_PREFIX).
-	created LD_LOADER environment variable to keep track of right ELF loader
-	to be used for the GLIBC used by the live update. added internal PATH
-	to LD_LIBRARY_PATH as ELF loader only check this one and not PATH.
-
-2001/03/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: 
-	  - make it work as a wizard
-	  - make it work with iptables (kernel-2.4)
-
-	* modules.pm: reflect Jeff Garzik's answers to my questions on kernel@
-
-2001/03/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/DrakX.pot, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/bg.po, share/po/de.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/br.po, share/po/ca.po,
-	share/po/cy.po, share/po/uk.po, share/po/wa.po, share/po/da.po,
-	share/po/cs.po, share/po/zh_TW.Big5.po, share/po/af.po: Updated Basque
-	file
-
-2001/03/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): save the compssUsers flattened
-	for rpmdrake
-
-	* install_steps_interactive.pm (summary): remove 'clicked' (labels are
-	used)
-	put everything in %compssUsers, use field flags for the flags :)
-
-	* pkgs.pm (computeGroupSize): log what is found
-	(saveCompssUsers): make it work
-	(readCompssUsers): clean-up
-	(saveCompssUsers): created
-	put everything in %compssUsers, use field flags for the flags :)
-	(computeGroupSize): created
-
-	* share/rpmsrate: lower Zope (anyway Zope is not in main)
-
-	* fsedit.pm (hds): search for existing lvm in @hds *and* @lvms
-
-	* commands.pm (loadkeys): created
-
-	* install_any.pm (setPackages): don't readCompssUsers with $o->{packages}
-	(setPackages): kernel-secure doesn't exist anymore, use kernel22-secure.
-	don't use kernel-secure as a kernel-smp.
-	put everything in %compssUsers, use field flags for the flags :)
-	(setPackages): set compssUsersChoice "3D" if 3D enabled graphic card
-
-	* interactive_gtk.pm (ask_from_entries_refW): add $set for "label" entries
-	add "label" type
-
-	* share/compssUsers: change the path format
-
-	* detect_devices.pm (get_mac_model): fix for perl2fcalls
-
-	* interactive.pm: add "label" type
-
-2001/03/12  warly
-
-	* share/compssUsers: add some NETWORKING_* that were empty
-	dispach some DEVELOPMENT and SERVER to more appropriate groups
-	added path
-
-	* share/rpmsrate: add some NETWORKING_* that were empty
-	dispach some DEVELOPMENT and SERVER to more appropriate groups
-
-2001/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ftp.pm: do not retry on 550 file unavailable
-
-2001/03/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): set compssUsersChoice "3D" if 3D enabled
-	graphic card
-
-2001/03/11  dam's  <damien@mandrakesoft.com>
-
-	* services.pm: no more restart button
-
-2001/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ftp.pm: do not retry on 550 file unavailable
-
-2001/03/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (summary): fix clicked empty handler
-
-	* share/rpmsrate: 
-	  - lower tftp-server
-	  - a lot of modifs (thanks to Prana)
-
-2001/03/10  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakxservices: embedded mode
-
-	* my_gtk.pm: added gtkset_border_width
-	typo again
-	typo
-	added gtkmove
-	added gtkset_modal and gtkappenditems
-
-	* services.pm: fixed big bug.
-	imajor improvement.
-	improved.
-
-2001/03/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Korean file
-
-2001/03/09  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakxconf: added harddrake
-
-	* my_gtk.pm: applied gtkradio
-	created create_boxradio
-	in wizard mode : list -> radio buttons
-	added gtkradio
-
-	* bootlook.pm: workaround for the graphical layout.
-
-	* install_steps_gtk.pm: applied gtkradio
-	created create_boxradio
-	in wizard mode : list -> radio buttons
-
-	* printerdrake.pm: if embedded -> no first question
-
-	* interactive_gtk.pm: added tooltips to create_boxradio
-	applied gtkradio
-	created create_boxradio
-	in wizard mode : list -> radio buttons
-
-2001/03/09  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: a hell lot of modifications, mostly cleanup of
-	DEVELOPEMENT
-
-2001/03/09  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: keyboard mapping for PPC
-
-	* detect_devices.pm: routine to detect MacIntosh model code
-
-2001/03/09  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: added gtkradio
-
-	* standalone/draknet: changed graphical layout, expert mode
-
-2001/03/09  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (read_rpmsrate): handle the special case of packages requiring
-	locales-*,
-	adding the flag LOCALES"*" for them
-
-	* install_steps_interactive.pm (choosePackages): moved the log to
-	install2::choosePackages (to have it in
-	auto_installs too)
-
-	* install_any.pm (setPackages): set compssUsersChoice LOCALES"*"
-
-	* install2.pm (choosePackages): log groups choosen
-
-	* share/rpmsrate: a hell lot of modifications, mostly cleanup of
-	DEVELOPEMENT
-	  - chineese packages
-	  - move Aurora's to AURORA (DrakX take care of Aurora)
-
-	* install_steps_gtk.pm (remove_advertising): created
-
-2001/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* verify_c: fix the regexp
-
-	* detect_devices.pm (floppies): load module "floppy" before probing
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: applied if__
-
-2001/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* verify_c: fix the regexp
-
-	* share/rpmsrate: add i18n'ed packages
-
-	* detect_devices.pm (floppies): load module "floppy" before probing
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* common.pm: added if__
-
-	* netconnect.pm: applied if__
-
-2001/03/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: avoid using e2fsck, else it abort by checking partition
-	size (which differs).
-	fix resize ext2 by using resize2fs.
-
-	* pkgs.pm: changed choice of package for selection.
-
-	* share/list: added resize2fs and dumpe2fs, removed ext2resize which is
-	replaced.
-
-2001/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: do not segfault in dhcp stuff, when af_packet is not
-	honoured by kernel
-
-2001/03/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: advertising modifs
-	(setPackages): use burners instead of IDEburners
-
-	* bootloader.pm: cleanup
-
-	* interactive.pm (ask_from_listf_no_check): catch wizcancel and return
-	undef
-
-	* fs.pm (write_fstab): change again for 'none' checking the mount point
-	(write_fstab): special case for device ``none'' (which can be mounted
-	twice or more :)
-
-	* my_gtk.pm (_create_window): on delete_event, destroy the window and
-	raise wizcancel
-
-	* share/po/fr.po: fix bad translation
-
-	* share/rpmsrate: add i18n'ed packages
-	raise kdebase
-
-	* install2.pm, install_steps.pm, install_steps_gtk.pm: advertising modifs
-
-	* detect_devices.pm: cleanup
-	(isBurner): use syslog to detect scsi burners
-
-2001/03/08  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_gtk.pm: encourage Xpmac to run in at least 16bpp
-
-	* partition_table_mac.pm: fixed variable referencing - thx Pixel
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad pci number -> string
-
-2001/03/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po, share/po/sr.po, share/po/sp.po, share/po/ca.po: updated
-	Bulgarian, Catalan and Serbian files
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (dev2grub): better error reporting
-
-	* tools/cvslog2changelog.pl (%users): add stew
-
-	* install_steps.pm (setupBootloaderBefore): aurora stupid renaming fix
-
-	* share/rpmsrate: raise kdebase
-	xcdroast is the best cd burner ui, raise it above others
-	lower some EDITORS
-	raise vim-X11
-	lower xrn, raise pan
-
-	* install_any.pm (setPackages): use burners instead of IDEburners
-	(setPackages): at least set BURNER for ide burners
-
-	* any.pm: cleanup
-
-	* install_steps_interactive.pm, install2.pm: re-add miscellaneous step,
-	but always hidden (aka automatic)
-
-	* detect_devices.pm (isBurner): use syslog to detect scsi burners
-
-	* fs.pm (write_fstab): special case for device ``none'' (which can be
-	mounted
-	twice or more :)
-
-	* tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions
-	(without mem=)
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad pci number -> string
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions
-	(without mem=)
-
-2001/03/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected default focus after detection
-	don't test adsl if net install
-
-2001/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (add_alias): remove the alias block-major-11 as it's
-	overriding the
-	default alias to sr_mod, and is uneeded with scsi_hostadapter being
-	added
-	to /etc/modules.conf
-
-	* share/rpmsrate: lower heartbeat
-
-2001/03/07  sbenedict
-
-	* help.pm: * perl-install/help.pm  - typo in yaboot help
-
-	* any.pm: * perl-install/any.pm - fixed two $l vs. @l references -
-	bootloader menu, need image/boot in rec mode PPC
-	CVl:
-	----------------------------------------------------------------------
-
-	* devices.pm: * perl-install/devices.pm - add adbmouse
-
-2001/03/07  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: not use common anymore, uses gtkpng, cosmetic chages
-
-2001/03/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm, bootloader.pm: fixed support for other kernel for
-	bootloader entries.
-	automatically add 2.2 entries for kernel22 (manage hack-kernel too).
-
-	* Xconfigurator.pm: remove 32 bit depth for S3 Trio3D card.
-
-	* pkgs.pm: added support for killing all child process of a transaction,
-	necessary to be
-	able to umount cdrom and eject it correctly.
-
-2001/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/fonts.tar.bz2: use gb16fs instead of gb16st
-
-	* modules.pm (add_alias): remove the alias block-major-11 as it's
-	overriding the
-	default alias to sr_mod, and is uneeded with scsi_hostadapter being
-	added
-	to /etc/modules.conf
-
-	* share/rpmsrate: lower heartbeat
-	lower Mesa's rate
-
-	* install2.pm (main): save $@ in $err so that it's not modified before
-	being used
-
-	* share/locales.tar.bz2: remove ending '/' in symlinks not pleasing
-	packdrake
-
-	* standalone/drakboot: make it please perl2fcalls
-
-2001/03/07  sbenedict
-
-	* bootloader.pm, Xconfigurator.pm: * perl-install/Xconfigurator.pm - force
-	XF4 for PPC in recommended mode
-	* perl-install/bootloader.pm - rework get_of_dev to work in live install
-
-	* install_steps_interactive.pm, any.pm, partition_table_mac.pm: *
-	perl-install/any.pm - change in partition_table_mac'xxx syntax
-	* perl-install/install_steps_interactive.pm - change in
-	partition_table_mac'xxx syntax
-	
-	* perl-install/partition_table_mac.pm - change in
-	partition_table_mac'xxx syntax
-
-2001/03/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po: Fixed French typos reported by tester
-
-2001/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/fonts.tar.bz2: use gb16fs instead of gb16st
-
-	* fsedit.pm: fix typo
-
-	* install2.pm (main): save $@ in $err so that it's not modified before
-	being used
-
-	* share/rpmsrate: lower Mesa's rate
-
-	* standalone/drakboot: make it please perl2fcalls
-
-2001/03/06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad %intf while savung
-	don't ask configuration if expert
-	now detecting adsl
-
-	* standalone/draknet: remmoved 'quiting appli' screen
-
-2001/03/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: fix save of automatic stage1 info for static network
-
-	* mdk-stage1/init.c: do not display from syslog msg's from RPM telling
-	that it
-	installed/removed some pkg's
-
-	* mdk-stage1/Makefile: fix includes for init
-
-2001/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, help.pm, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, standalone/draknet,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: corrected some typos, Updated Japanese
-	file
-
-2001/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* perl2fcalls: 
-	  - small fix for bootlook.pm
-	  - don't display reused
-
-	* detect_devices.pm (stringlist): if no text description, display ids
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): comment old code
-	(summary): fixes
-	(setupSCSI): cleanup
-	(summary): display sound/tv/isdn cards found
-
-	* fsedit.pm (check_mntpoint): don't allow LVM on / or /boot
-	(@suggestions_mntpoints): add /boot
-
-	* install_any.pm: hack to make perl2fcalls happy
-	(getHds): fix for no hd detected in newbie installs
-	(setPackages): s/snd-slot/sound-slot/
-
-	* install_steps_auto_install.pm (@graphical_steps): add
-	beforeInstallPackages so that advertisings are there
-
-	* install2.pm (setupSCSI): remove autoSCSI, cleanup
-
-	* http.pm, ftp.pm: don't use install_any
-
-	* modules.pm: add cciss
-
-	* partition_table.pm (add): create 3 primaries before creating an extended
-	if DAC960 (/dev/rd/*)
-	(add): max number of parts for rd, ida and cciss
-
-2001/03/06  yduret
-
-	* bootlook.pm: pixelisation
-
-2001/03/06  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: corrected bad file search
-	corrected intf setting
-
-	* standalone/draknet: added enable/disable networking button.
-
-	* standalone/drakxconf: updated to be launched frome DrakConf if no
-	DISPLAY
-
-	* netconnect.pm: now detecting adsl
-	typo
-	better load_conf
-
-	* Xconfigurator.pm: cleaned png displaying
-
-	* common.pm: setinhash -> set_in_hash
-	added setinhash
-
-	* fs.pm: typo
-	use set_in_hash
-
-2001/03/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/cdrom.c: enable probing of all the CDROM drives in automatic
-	mode
-
-	* mdk-stage1/Makefile: fix includes for init
-
-2001/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: corrected some typos, Updated Japanese file
-	updated Lithuanian file
-
-	* help.pm, standalone/draknet: corrected some typos, Updated Japanese file
-
-2001/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, any.pm, Xconfigurator.pm: move inittab modifying to
-	any::runlevel
-
-	* partition_table.pm (add): max number of parts for rd, ida and cciss
-
-	* fs.pm, netconnect.pm, common.pm: set_in_hash is now put_in_hash
-
-	* diskdrake.pm (Create): pixelization
-
-	* fsedit.pm (hds): pixelization
-
-	* install_steps_auto_install.pm (@graphical_steps): add
-	beforeInstallPackages so that advertisings are there
-
-	* modules.pm: add cciss
-
-	* install2.pm (main): remove unloading vfat (not needed anymore with
-	mdk-stage1)
-
-2001/03/05  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: $mouse->{device} is set if it doesn't exists.
-
-	* Makefile: added pixmaps copying
-
-2001/03/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* netconnect.pm, bootlook.pm, help.pm: fixed English typos
-
-2001/03/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): use
-	generate_automatic_stage1_params
-
-	* c/stuff.xs.pm, my_gtk.pm: XSetInputFocus now done in perl-GTK
-
-	* install_any.pm (generate_automatic_stage1_params): replace
-	generate_ks_cfg
-
-2001/03/05  dam's  <damien@mandrakesoft.com>
-
-	* Makefile: added pixmaps copying
-
-	* standalone/draknet: required gtk only if needed, added redirection to
-	newt if needed
-
-	* netconnect.pm: $mouse->{device} is set if it doesn't exists.
-	corrected short circuit if network install
-	corrected bad end message,
-	added copying of resolv.conf & modules.conf
-
-	* install2.pm: moved askrootpasswd and adduser before network conf
-
-	* network.pm: removed old NS0 fetching. /etc/resolv.conf is read in
-	install2.pm now
-	removed setdefaultroute and sethostname
-
-2001/03/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated Latvian, Belarussian and Spanish files
-
-2001/03/05  Pixel  <pixel@mandrakesoft.com>
-
-	* lvm.pm (lv_create): fix typo
-
-	* bootloader.pm: add use devices
-	(install_grub): ensure the translated messages are not too big the hard
-	way
-
-	* install_any.pm (generate_automatic_stage1_params): replace
-	generate_ks_cfg
-	(install_urpmi): have "use hdlist ..." in any case
-
-	* my_gtk.pm: XSetInputFocus now done in perl-GTK
-	(_create_window): don't care about c::XSetInputFocus not existing
-
-	* any.pm (setupBootloader): pixelization
-	(setupBootloader): fix call to get_append
-
-	* interactive.pm (vnew): cleanup
-
-	* common.pm (salt): cleanup
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): use
-	generate_automatic_stage1_params
-
-	* c/stuff.xs.pm: XSetInputFocus now done in perl-GTK
-
-	* c/Makefile.PL: compile fix
-
-	* diskdrake.pm (create_buttons4partitions_): fix for displaying LVM
-
-	* Xconfigurator.pm (xtest): use external xtest if standalone
-
-	* install2.pm (main): remove unloading vfat (not needed anymore with
-	mdk-stage1)
-
-2001/03/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	diskdrake.pm, share/po/af.po: updated po files
-
-2001/03/04  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Add2LVM): fix bug (causing empty list), make cancel work
-
-	* share/rpmsrate: 
-	  - remove autologin
-	  - move X11R6-contrib to DEVELOPEMENT and lower rate
-
-2001/03/04  stew   <sbenedict@mandrakesoft.com>
-
-	* any.pm - changes to enable yaboot configuration for PPC
-
-	* diskdrake.pm, fs.pm, partition_table.pm isBootstrap -> isAppleBootstrap
-
-	* install_steps_interactive.pm - auto-add Apple Bootstrap - PPC
-
-2001/03/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, fsedit.pm, lvm.pm, standalone/diskdrake,
-	install_interactive.pm, install2.pm: small fixes for LVM
-
-	* diskdrake.pm: don't default the LVM name to 'pp' ;pp
-	small fixes for LVM
-
-2001/03/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: small fixes for LVM
-	(doPartitionDisksAfter): small adaptation for LVMs
-	use run_or_die
-
-	* fsedit.pm: small fixes for LVM
-	(hds): detect LVMs and return them
-	(add): handling of LVMs
-	(@partitions_signatures): add new magic of reiserfs
-
-	* bootloader.pm: use run_or_die
-
-	* run_program.pm (run_or_die, rooted_or_die): created
-
-	* install_steps_interactive.pm: cleanup
-
-	* install_any.pm (getHds): handle LVMs. $o->{lvms} contain them
-	(setPackages): ask for installation of package lvm when needed
-	(suggest_mount_points, find_root_parts): take $fstab as arg instead of
-	$hds
-
-	* install2.pm: small fixes for LVM
-	(formatPartitions): call vgscan if needed when / is mounted
-
-	* devices.pm (make): better caller in error
-
-	* share/list: add progs for LVM handling
-
-	* install_interactive.pm: small fixes for LVM
-
-	* diskdrake.pm: small fixes for LVM
-	  - addition of drive to notebook cleaned
-	  - various clean-up
-	  - handling of LVMs
-
-	* standalone/diskdrake: small fixes for LVM
-	small adaptation
-
-	* lvm.pm: small fixes for LVM
-	creation
-
-	* partition_table.pm: add isLVMBased
-
-2001/03/02  stew   <sbenedict@mandrakesoft.com>
-
-	* commands.pm - fdisk locks up machine on report_bug - replace with pdisk PPC
-
-	* install_steps.pm - no bootfloppy, added yaboot.conf - PPC
-
-	* install_interactive.pm - pdisk vs. fdisk - PPC
-
-	* bootloader.pm - added code to create yaboot.conf, run ybin - vmlinux vs. vmlinuz
-
-2001/03/02  stew   <sbenedict@mandrakesoft.com>
-
-	* c/smp.c -stanza for PPC
-	
-	* detect_devices.pm - added code for MO devices
-
-	* help.pm - help information for yaboot - PPC
-
-	* partition_table.pm - PPC mods
-
-	* partition_table_mac.pm - PPC mods 
-
-	* modules.pm - PPC mods - parallel port not used
-
-	* diskdrake.pm - PPC mods - display like pdisk
-
-	* install2.pm - PPC mod - no bootdisk
-
-	* fs.pm - bootstrap partition - PPC
-	
-2001/02/27  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: pop up a dialog to quit X when accepting
-	configuration
-
-2001/02/27  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_raw.pm (@MBR_signatures): add yet another grub signature
-
-	* devices.pm (entry): add fd0H1440 and fd1H1440
-
-	* bootloader.pm (mkbootdisk): fix for mkbootdisk using fd0H1440. Must be
-	created
-
-2001/02/26  dam's  <damien@mandrakesoft.com>
-
-	* Makefile.drakxtools, pixmaps/hori.xpm, pixmaps/tradi.xpm,
-	pixmaps/eth_card_mini.xpm, pixmaps/verti.xpm: new pixmap policy
-
-	* Makefile: typo
-	new pixmap policy
-
-	* bootlook.pm: typo
-	new pixmap policy
-	need to be merged with bootloader
-
-	* standalone/draknet: reincluded Gtk + init Gtk
-	thiskind -> thiskind_backend
-	new pixmap policy
-
-	* standalone/drakboot: short-circuit to bootlook for the moment.
-
-2001/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po,
-	share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: Fixed i18n_compssUsers
-	script to produce a correct pot file
-	Updated Estonian and Walloon files
-
-	* bootlook.pm: changed I_() to _() so xgettext cna find the translatable
-	strings
-
-2001/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakgw: pixelization
-
-	* install_steps.pm: remove unneeded "use install_interactive"
-
-	* install_steps_gtk.pm (copy_advertising): fix changing for
-	advertising_images
-
-2001/02/26  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: should correct bad resolv.conf when swithcinf in
-	standalone embedded mode. Not Certified
-	fixed standalone edition
-	corrected wizard mode.
-
-	* Makefile.drakxtools, Makefile, pixmaps/eth_card_mini.xpm: new pixmap
-	policy
-
-	* standalone/draknet: new pixmap policy
-	fixed standalone edition
-
-	* bootlook.pm: need to be merged with bootloader
-
-	* interactive_gtk.pm: if wizard, show the button
-
-	* standalone/drakboot: short-circuit to bootlook for the moment.
-
-2001/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (if_): fix for use in scalar context
-
-	* install_steps_interactive.pm (summary): translate mouse description
-
-	* install_steps.pm: remove unneeded "use install_interactive"
-
-	* install_steps_gtk.pm (copy_advertising): fix changing for
-	advertising_images
-
-2001/02/26  warly
-
-	* share/compssUsers, share/rpmsrate: remove some packages
-
-2001/02/26  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: if wizard, show the button
-
-	* netconnect.pm: corrected wizard mode.
-
-2001/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (if_): fix for use in scalar context
-
-	* install_steps_interactive.pm (summary): translate mouse description
-
-2001/02/25  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake-Firewall.xpm, share/logo-mandrake.xpm: changed logo.
-
-	* netconnect.pm: profile handling.
-	profile handling
-	corrected wizard.
-
-	* standalone/draknet: profile handling.
-	profile handling
-
-	* install_steps_interactive.pm: updated
-
-2001/02/25  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): move the load_deps before all the loadO's
-
-	* install_any.pm (g_auto_install): have formatMountPartitions graphical if
-	$graphical
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): use "timeout 1"
-	for replay
-
-	* interactive_gtk.pm (ask_from_entries_refW): ensure "advanced" lists
-	center the chosen value
-
-2001/02/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, install2.pm: move writing to config files from
-	install2::selectKeyboard to install_steps
-
-	* share/list, Makefile, tools/i386/mkreiserfs: for now, have mkreiserfs in
-	the CVS since the current cooker version is too recent
-
-	* commands.pm (more): handle 'q' to quit
-
-2001/02/24  Pixel  <pixel@mandrakesoft.com>
-
-	* c/Makefile (stuff): fix the fix's fix :'-(
-
-	* detect_devices.pm (pci_probe): fix to clean the log
-
-	* install_steps_interactive.pm (setRootPassword): NIS server must be
-	editable
-
-2001/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (g_auto_install): handle $replay flag. It means a 'not
-	fully automated install'.
-
-	* install_steps_auto_install.pm (@graphical_steps): specify which step
-	should be interactive
-
-	* c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed
-
-	* install_steps.pm (afterInstallPackages): no kdm UserView in NIS
-	(configurePrinter): if_'ization
-
-	* install_steps_interactive.pm (exitInstall): ask wether Replay or
-	Automated
-	(generateAutoInstFloppy): handle $replay flag. It means a 'not fully
-	automated install'.
-	(summary): nicer mouse name
-
-2001/02/23  dam's  <damien@mandrakesoft.com>
-
-	* network.pm, standalone/draknet, netconnect.pm, my_gtk.pm: new wizard
-	layout, no use gtk in draknet, minor bugfixes
-
-2001/02/23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added accessor the rpmsrate data of packages.
-	avoid rebuilding the database for oem, rpm db is assumed to be fine.
-
-	* rescue/make_rescue_img: removed kernel_reread program.
-
-	* rescue/tree/etc/oem: removed server from selection.
-	added mutli CD support to OEM (NFS/DVD transparent)
-	fixed selection of package now select much more than before.
-	fixed root partition size set to the minimum.
-
-2001/02/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: move xterm to SYSTEM
-
-2001/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: move the 'use my_gtk' in 'require my_gtk' and only if
-	needed
-
-	* install_steps_auto_install.pm (@graphical_steps): specify which step
-	should be interactive
-
-	* c/stuff.xs.pm: hack for macroporcessing in term.h
-	use C_DRAKX
-
-	* install_steps.pm (afterInstallPackages): no kdm UserView in NIS
-	(configurePrinter): if_'ization
-
-	* share/rpmsrate: add packages installed on demand by DrakX. they are
-	specifically flagged
-	or flagged 'INSTALL'
-
-	* perl2fcalls: handling of ``package''->import(``what to import'')
-
-	* interactive.pm (vnew): use /usr/X11R6/bin/xtest instead of c::Xtest
-
-	* Makefile (tar-drakxtools): C_RPM and C_DRAKX set to 0
-
-	* install_any.pm (g_auto_install): handle $replay flag. It means a 'not
-	fully automated install'.
-
-	* c/Makefile.PL: use C_DRAKX
-
-	* pkgs.pm (setSelectedFromCompssList): fix the fix
-
-	* c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed
-	add setting C_DRAKX to 1 by default
-
-	* install_steps_interactive.pm (exitInstall): ask wether Replay or
-	Automated
-	(generateAutoInstFloppy): handle $replay flag. It means a 'not fully
-	automated install'.
-	(summary): nicer mouse name
-
-2001/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): double clicking on list
-	means 'Ok'
-
-	* pkgs.pm (setSelectedFromCompssList): fix sillyness
-
-2001/02/22  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corected infinite loop
-
-2001/02/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: minor cleanup to edit partition size more easily.
-	brand new version written in perl, support repartitionning on the fly of
-	the
-	hard disk and resize of already present FAT partition.
-
-	* rescue/list.i386, rescue/list, rescue/Makefile: make rescue build a bit
-	more cleaner (added dependancy).
-	added missing file for rescue to enable new oem install.
-
-2001/02/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/insmod-modutils/include/elf_hppa64.h,
-	mdk-stage1/insmod-modutils/util/alias.h,
-	mdk-stage1/insmod-modutils/util/xstrcat.c,
-	mdk-stage1/insmod-modutils/util/gzfiles.c,
-	mdk-stage1/insmod-modutils/include/elf_arm.h,
-	mdk-stage1/insmod-modutils/util/sys_qm.c,
-	mdk-stage1/insmod-modutils/util/modstat.c,
-	mdk-stage1/insmod-modutils/obj/obj_sparc.c,
-	mdk-stage1/insmod-modutils/include/elf_m68k.h,
-	mdk-stage1/insmod-modutils/Makefile,
-	mdk-stage1/insmod-modutils/util/xstrdup.c,
-	mdk-stage1/insmod-modutils/obj/obj_arm.c,
-	mdk-stage1/insmod-modutils/obj/obj_m68k.c,
-	mdk-stage1/insmod-modutils/obj/obj_hppa64.c,
-	mdk-stage1/insmod-modutils/include/elf_sparc64.h,
-	mdk-stage1/insmod-modutils/util/sys_dm.c,
-	mdk-stage1/insmod-modutils/include/elf_s390.h,
-	mdk-stage1/insmod-modutils/obj/obj_s390.c,
-	mdk-stage1/insmod-modutils/util/xmalloc.c,
-	mdk-stage1/insmod-modutils/util/xsystem.c, mdk-stage1/insmod.h,
-	mdk-stage1/insmod-modutils/util/xftw.c,
-	mdk-stage1/insmod-modutils/include/elf_i386.h,
-	mdk-stage1/insmod-modutils/util/sys_gks.c,
-	mdk-stage1/insmod-modutils/util/snap_shot.c,
-	mdk-stage1/insmod-modutils/obj/obj_i386.c, mdk-stage1/modules.c,
-	mdk-stage1/stage1.c, mdk-stage1/insmod-modutils/include/obj.h,
-	mdk-stage1/insmod-modutils/include/elf_ppc.h,
-	mdk-stage1/insmod-modutils/obj/obj_reloc.c,
-	mdk-stage1/insmod-modutils/include/elf_sparc.h,
-	mdk-stage1/insmod-modutils/util/sys_nim.c,
-	mdk-stage1/insmod-modutils/obj/obj_ppc.c, mdk-stage1/Makefile,
-	mdk-stage1/insmod-modutils/include/elf_hppa.h,
-	mdk-stage1/insmod-busybox/insmod.c,
-	mdk-stage1/insmod-modutils/util/meta_expand.c,
-	mdk-stage1/insmod-modutils/util/arch64.c,
-	mdk-stage1/insmod-modutils/obj/obj_load.c,
-	mdk-stage1/insmod-modutils/obj/obj_hppa.c,
-	mdk-stage1/insmod-busybox/insmod.h,
-	mdk-stage1/insmod-modutils/include/elf_ia64.h,
-	mdk-stage1/insmod-modutils/obj/obj_ia64.c,
-	mdk-stage1/insmod-modutils/obj/obj_sparc64.c,
-	mdk-stage1/insmod-modutils/include/elf_mips.h,
-	mdk-stage1/insmod-modutils/include/module.h,
-	mdk-stage1/insmod-modutils/obj/obj_mips.c,
-	mdk-stage1/insmod-modutils/util/sys_cm.c,
-	mdk-stage1/insmod-modutils/obj/obj_alpha.c,
-	mdk-stage1/insmod-modutils/include/kerneld.h,
-	mdk-stage1/insmod-modutils/util/xrealloc.c,
-	mdk-stage1/insmod-modutils/obj/Makefile,
-	mdk-stage1/insmod-modutils/insmod-frontend.c,
-	mdk-stage1/insmod-modutils/obj/obj_common.c,
-	mdk-stage1/insmod-modutils/include/modstat.h,
-	mdk-stage1/insmod-modutils/util/Makefile,
-	mdk-stage1/insmod-modutils/include/config.h,
-	mdk-stage1/insmod-modutils/util/logger.c,
-	mdk-stage1/insmod-modutils/obj/obj_kallsyms.c,
-	mdk-stage1/Makefile.common, mdk-stage1/insmod-modutils/include/util.h,
-	mdk-stage1/insmod-modutils/util/config.c,
-	mdk-stage1/insmod-modutils/include/version.h,
-	mdk-stage1/insmod-modutils/include/kallsyms.h,
-	mdk-stage1/insmod-modutils/include/elf_alpha.h,
-	mdk-stage1/insmod-modutils/util/sys_oim.c,
-	mdk-stage1/insmod-modutils/insmod.c: use modutils for non Intel arch's
-
-2001/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but
-	not
-	over existing /etc/fstab. Fix some stupid stuff
-
-	* modules.pm, commands.pm: call /usr/bin/insmod_ with full path
-
-	* install2.pm (main): don't set a special $remote_path PATH for
-	postInstallNonRooted
-	(otherwise install's modprobe is not used, and you can't "modprobe
-	vfat",
-	even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not
-	found.
-
-	* my_gtk.pm (create_box_with_title): disallow focusing on text if it is
-	non-scrolled
-
-2001/02/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/minilibc.c,
-	mdk-stage1/init-libc-headers.h,
-	mdk-stage1/dietlibc/include/sys/select.h, mdk-stage1/Makefile,
-	mdk-stage1/init.c, mdk-stage1/minilibc.h,
-	mdk-stage1/dietlibc/include/unistd.h,
-	mdk-stage1/dietlibc/include/sys/socket.h,
-	mdk-stage1/dietlibc/include/signal.h: have "init" compiled against
-	dietlibc (rather than glibc) on non-Intel arch's
-
-2001/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm: $graphical is now a module variable. Can
-	be changed from everywhere
-
-	* fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but
-	not
-	over existing /etc/fstab. Fix some stupid stuff
-
-	* modules.pm, commands.pm: call /usr/bin/insmod_ with full path
-
-	* install2.pm (main): don't set a special $remote_path PATH for
-	postInstallNonRooted
-	(otherwise install's modprobe is not used, and you can't "modprobe
-	vfat",
-	even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not
-	found.
-
-	* my_gtk.pm (create_box_with_title): disallow focusing on text if it is
-	non-scrolled
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): fix setting
-	type to 'list' in
-	case of format. should be only set if type is unset
-	(ask_from_entries_refH_powered_normalize): if list+format then type is
-	'list', combo not accepted (hacky?)
-
-	* interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't
-	call create_okcancel
-
-2001/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): if list+format
-	then type is
-	'list', combo not accepted (hacky?)
-
-	* install_steps_auto_install.pm: $graphical is now a module variable. Can
-	be changed from everywhere
-
-	* interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't
-	call create_okcancel
-
-2001/02/21  dam's  <damien@mandrakesoft.com>
-
-	* network.pm, netconnect.pm: netconnect recode, wizard compatible.
-	network.pm modified for wizard. Still need work for ask_yesorno,
-	ask_okcancel. +debugging of course
-
-	* standalone/draknet: updated (don't remember what)
-
-2001/02/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/Makefile,
-	mdk-stage1/dietlibc/lib/vprintf.c, mdk-stage1/dietlibc/lib/vfprintf.c,
-	mdk-stage1/minilibc.h, mdk-stage1/minilibc.c,
-	mdk-stage1/init-libc-headers.h: 
-	  - fix "init" on ppc (do not use minilibc on non-i386 arch's)
-	  - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc)
-	  - cleanup of "init"
-
-	* mdk-stage1/init.c: 
-	  - fix "init" on ppc (do not use minilibc on non-i386 arch's)
-	  - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc)
-	  - cleanup of "init"
-	fix up syslog logging stuff
-
-2001/02/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (generateAutoInstFloppy): removed
-
-	* install_any.pm (g_auto_install): use selected_leaves for
-	default_packages to reduce the
-	list of packages (aka cleanup auto_inst.cfg)
-	(g_default_packages): created
-
-	* install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy
-	and g_default_packages calls in
-	advanced
-
-	* netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use
-
-	* pkgs.pm (selected_leaves): created
-
-	* install2.pm (main): do postInstallNonRooted before postInstall (so that
-	'modprobe
-	vfat' can be done in postInstallNonRooted and used in postInstall)
-	  - move the loadO of patch/defcfg after loading modules.dep
-	  - generateAutoInstFloppy is no more a step
-	  - removed use Data::Dumper
-
-2001/02/21  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* share/rpmsrate: Add iputils to SYSTEM.
-
-2001/02/21  dam's  <damien@mandrakesoft.com>
-
-	* docs/wizard.doc: putain de doc de merde pout petite qui est trop d�bile
-
-	* interactive.pm, my_gtk.pm: corrected wizard mode.
-
-2001/02/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/TECH-INFOS: sync doc with disk automatic installs
-
-	* mdk-stage1/disk.c: add support for automatic (ex-kickstart) in disk
-	installs
-
-2001/02/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/02/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (generateAutoInstFloppy): removed
-
-	* install_any.pm (g_auto_install): use selected_leaves for
-	default_packages to reduce the
-	list of packages (aka cleanup auto_inst.cfg)
-	(g_default_packages): created
-
-	* install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy
-	and g_default_packages calls in
-	advanced
-
-	* netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use
-
-	* pkgs.pm (selected_leaves): created
-
-	* install2.pm (main): do postInstallNonRooted before postInstall (so that
-	'modprobe
-	vfat' can be done in postInstallNonRooted and used in postInstall)
-	  - move the loadO of patch/defcfg after loading modules.dep
-	  - generateAutoInstFloppy is no more a step
-	  - removed use Data::Dumper
-
-2001/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* printerdrake.pm: fix typo
-
-	* install_steps.pm, install_steps_gtk.pm, install_any.pm: better
-	advertising support
-
-2001/02/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/url.h, mdk-stage1/url.c, mdk-stage1/network.c: for HTTP
-	installs, make use of Content-Length when available, to display
-	progressbar
-
-2001/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: various
-	  - pcmcia_config.patch now in tools (no more in install which is
-	removed)
-	  - copy xpm's (until step icons work with png's)
-	  - transform group icons in pngs
-
-	* modules.pm, class_discard.pm, my_gtk.pm, Xconfigurator.pm: various
-
-	* tools/pcmcia_config.patch: pcmcia_config.patch now here
-
-	* printerdrake.pm: fix typo
-
-	* install_any.pm, install_steps.pm, install_steps_gtk.pm: better
-	advertising support
-
-2001/02/20  warly
-
-	* share/compssUsers, share/rpmsrate, share/compssList: update rpmsrate
-
-2001/02/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* c/stuff.xs.pm, live_install, pkgs.pm, live_install2: added RPMRC_FILE
-	env variable to choose rpmrc file for rpmlib used
-	by DrakX, neccessary for live update from a 7.2 or older.
-	Check that if something goes wrong with rebuilddb, avoid removing
-	old rpm-3 db files.
-	Make sure live_install can start from top directory too.
-
-2001/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: various
-	  - pcmcia_config.patch now in tools (no more in install which is
-	removed)
-	  - copy xpm's (until step icons work with png's)
-	  - transform group icons in pngs
-
-	* modules.pm, class_discard.pm: various
-
-	* tools/pcmcia_config.patch: pcmcia_config.patch now here
-
-	* my_gtk.pm, Xconfigurator.pm: various
-	major move. now ask_from_list returns false when canceled (it doesn't
-	die 'ask_from_list canceled' anymore)
-
-	* interactive_gtk.pm, standalone/mousedrake, install_steps_interactive.pm,
-	netconnect.pm, standalone/keyboarddrake, install2.pm, interactive.pm,
-	any.pm, printerdrake.pm, diskdrake.pm: major move. now ask_from_list
-	returns false when canceled (it doesn't die 'ask_from_list canceled'
-	anymore)
-
-2001/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c: try to print errno's stuff when symlink to
-	/tmp/stage2 failed
-
-	* mdk-stage1/dhcp.c: ARP_MAX_RETRIES: s/5/4
-
-2001/02/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Estonian file
-
-2001/02/19  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf_no_check): die 'ask_from_list cancel' on
-	cancel
-
-	* my_gtk.pm (create_packtable): don't use attach_raw anymore (was a
-	sillyme)
-
-2001/02/18  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: typo
-	make fbastok happy about button placement.
-	little improvements.
-
-2001/02/16  dam's  <damien@mandrakesoft.com>
-
-	* install_gtk.pm: corrected xpm mask
-
-	* network.pm: wireless eth support corrected.
-
-	* share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
-	share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm,
-	share/step-orange-on.xpm, share/step-green-on.xpm,
-	share/step-red-click.xpm: re added these xpm files against display mask
-	pb.
-
-2001/02/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: better ansi colors
-
-	* mdk-stage1/dhcp.c: comply with glibc-2.2.2 more strict headers
-
-	* mdk-stage1/stdio-frontend.c: display more nicely when there is a long
-	list to choose from (1, 2 or 4 columns)
-
-2001/02/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/TECH-INFOS, mdk-stage1/README: update doc
-
-2001/02/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-2001/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix i_images
-
-	* fsedit.pm (suggestions_mntpoint): fix
-
-2001/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix i_images
-	(installPackages): traktolpilization and advertising
-
-	* Makefile (get_needed_files): copy png files instead of xpm's
-
-	* fsedit.pm (suggestions_mntpoint): fix
-
-	* my_gtk.pm (gtkcreate_png): add error message, syntax cleanup
-
-	* share/list: add GdkImlib stuff
-
-	* perl2fcalls: add Gtk::Gdk::ImlibImage
-
-	* install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share
-	if it exists
-
-2001/02/15  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm, any.pm, install_gtk.pm, install_steps_interactive.pm,
-	install_steps_gtk.pm, interactive_gtk.pm: added png support. Need to
-	test the faces2xpm stuff.
-
-	* share/step-orange-click.xpm, share/rpm-selected.xpm,
-	share/step-green-click.xpm, share/step-green.xpm, share/rpm-base.xpm,
-	share/ftin.xpm, share/step-orange-on.xpm, share/ftout.xpm,
-	share/step-red-click.xpm, share/step-green-on.xpm,
-	share/rpm-unselected.xpm, share/step-red.xpm, share/step-orange.xpm,
-	share/reload.xpm, share/rpm-semiselected.xpm,
-	share/logo-mandrake-Desktop.xpm, share/rpm-installed.xpm,
-	share/step-red-on.xpm: removed, png are used instead.
-
-	* standalone/draknet: updated internet and added eth conf
-
-	* share/help.xpm, share/logo-mandrake.xpm: removed, png are used instead.
-	added png images
-
-	* share/step-red.png, share/step-orange.png, share/reload.png,
-	share/logo-mandrake.png, share/rpm-semiselected.png,
-	share/logo-mandrake-Desktop.png, share/rpm-installed.png,
-	share/logo-mandrake_sav.png, share/step-red-on.png, share/help_sav.png,
-	share/rpm-selected.png, share/step-orange-click.png,
-	share/step-green-click.png, share/step-green.png, share/rpm-base.png,
-	share/logo-mandrake2.png, share/ftin.png, share/help.png,
-	share/step-orange-on.png, share/step-green-on.png, share/ftout.png,
-	share/step-red-click.png, share/step-green_s.png, share/themes-mdk.rc,
-	share/rpm-unselected.png: added png images
-
-2001/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile (get_needed_files): copy png files instead of xpm's
-
-	* install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share
-	if it exists
-	(selectKeyboard): give clicked as parameter
-
-	* my_gtk.pm (gtkcreate_png): add error message, syntax cleanup
-
-	* fsedit.pm (suggestions_mntpoint): fix typo
-
-	* share/list: add GdkImlib stuff
-
-	* perl2fcalls: add Gtk::Gdk::ImlibImage
-
-	* install_steps_interactive.pm (summary): better message for i18n
-
-	* install_steps_gtk.pm (installPackages): traktolpilization and
-	advertising
-
-2001/02/14  dam's  <damien@mandrakesoft.com>
-
-	* network.pm, standalone/draknet: wireless updated
-
-	* share/help.xpm, share/themes-mdk.rc, share/logo-mandrake.xpm: valentin
-	theme :)
-
-2001/02/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): add user in group usb
-
-2001/02/14  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-mdk.rc: valentin theme :)
-	added drawing theme section
-
-	* network.pm: wireless updated
-	updated wireless eth support
-
-	* standalone/draknet: wireless updated
-
-	* share/help.xpm, share/logo-mandrake.xpm: valentin theme :)
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: network con initiated in draknet.
-	netconnect improvement.
-	typo
-
-	* network.pm: typo
-	corrected domainname setting
-
-	* standalone/draknet: network con initiated in draknet.
-	netconnect improvement.
-
-2001/02/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/frontend.h, mdk-stage1/network.h,
-	mdk-stage1/stdio-frontend.c, mdk-stage1/dhcp.c, mdk-stage1/automatic.c,
-	mdk-stage1/newt-frontend.c, mdk-stage1/automatic.h, mdk-stage1/disk.c,
-	mdk-stage1/network.c: write down Magic Callback (tm) for static ip stuff
-
-	* mdk-stage1/modules.c: ask for modules parameters everytime in expert
-	mode, to avoid wrong autodetections in certain cases
-	  - better log of nfs mount errors
-	  - don't insmod modules already present (important for bzip2 slowness)
-
-	* mdk-stage1/cdrom.c: better error msg thx to mcdtg
-
-	* mdk-stage1/mount.c, mdk-stage1/nfsmount.c: 
-	  - better log of nfs mount errors
-	  - don't insmod modules already present (important for bzip2 slowness)
-
-	* mdk-stage1/stage1.c, mdk-stage1/init.c: use exit code 66 for rescue
-	better console messages at startup
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: profile handling updated
-
-	* network.pm: typo
-	corrected domainname setting
-
-	* netconnect.pm: finished load_conf
-
-2001/02/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/make_rescue_img, rescue/list: include libs for hostname resolving
-
-	* mdk-stage1/stage1.c, mdk-stage1/init.c: better console messages at
-	startup
-
-	* mdk-stage1/tools.c: 
-	  - save /etc/resolv.conf for rescue
-
-2001/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard): can be automatic only in
-	non-expert
-
-	* any.pm: md5 now done via crypt
-
-	* install_steps.pm (exitInstall): catch exception of output report.bug
-	(for gc)
-
-2001/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard): can be automatic only in
-	non-expert
-
-	* tools/cvslog2changelog.pl: fix for gc & fpons
-	fix for fredl broken CVS
-
-	* any.pm: md5 now done via crypt
-
-	* install_steps.pm (exitInstall): catch exception of output report.bug
-	(for gc)
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* network.pm: experimental wireless eth support. Not tested
-
-2001/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: fix for gc & fpons
-	fix for fredl broken CVS
-
-	* c/stuff.xs.pm, c/Makefile.PL, c/md5.h, c/md5_crypt.c, c/md5.c: md5 can
-	be done via crypt of glibc, so remove all this
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* any.pm: merging difference
-
-	* netconnect.pm: corrected profile handling
-
-	* network.pm: experimental wireless eth support. Not tested
-
-2001/02/12  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added
-	docs, rescue, tools)
-
-2001/02/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/probing.c: do not close un unbound socket!!
-
-	* c/stuff.xs.pm: close socket everytime in hasNetDevice
-
-	* mdk-stage1/Makefile: tag it 8.0beta instead of 8.0, to avoid future
-	potential confusions
-
-	* modules.pm: re include some network modules
-
-2001/02/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/list: fix vi trouble
-	  - add lspci, lspcidrake, vim-minimal
-	  - better /etc/issue
-	  - better PS1
-	  - write embryonic tool (installation of detected drivers according to
-	pci cards)
-
-	* rescue/aliases, rescue/tree/etc/issue: fix vi trouble
-
-	* rescue/list.i386, rescue/make_rescue_img, rescue/drvinst: 
-	  - add lspci, lspcidrake, vim-minimal
-	  - better /etc/issue
-	  - better PS1
-	  - write embryonic tool (installation of detected drivers according to
-	pci cards)
-
-2001/02/12  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/drvinst: pixelization
-
-	* docs/README: fix doc about Mandrake/base/compss
-
-	* install_steps_gtk.pm (choosePackagesTree): non first choice packages are
-	in "Other".
-
-	* install_interactive.pm, any.pm, fsedit.pm, diskdrake.pm: auto_allocate
-	partitions choice modified. diskdrake in expert asks what kind
-	of auto_allocation is wanted, others choose 'simple' in
-	%fsedit::suggestions
-
-	* install2.pm: auto_allocate partitions choice modified. diskdrake in
-	expert asks what kind
-	of auto_allocation is wanted, others choose 'simple' in
-	%fsedit::suggestions
-	(main): gc has done it again! /tmp/conf.modules is now
-	/etc/modules.conf,
-	so load both to keep compatibility.
-
-	* my_gtk.pm: cleanup (remove ask_from_list and _ask_from_list)
-
-	* interactive_gtk.pm (ask_from_entries_refW): use
-	$common->{advanced_label}
-	(create_ctree): add keyboard shortcuts
-	(create_clist): moveto only if row_is_visible
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): advanced_label
-	defaults to
-	_("Advanced")
-
-	* tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added
-	docs, rescue, tools)
-
-	* install_steps_interactive.pm (configurePrinter): cleanup,
-	pkg_install_if_requires_satisfied('xpp',
-	'kups') only if a printer is configured (for the case when _("Would you
-	like to configure a printer?") is answered no)
-
-	* rescue/tree/etc/rc.sysinit: add floppy module for 2.4
-
-2001/02/10  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/draknet, standalone/XFdrake: corrected pkgs_install given
-
-	* install_any.pm: add preConfigureTimezone
-	add step summary. remove steps configureTimezone and configurePrinter
-
-	* install_interactive.pm: cleanup
-
-	* standalone/keyboarddrake, share/keymaps_generate, keyboard.pm: 
-	  - lang2keyboards handle keyboard percentages
-	  - xmodmaps now named keyboards
-
-	* install_steps_interactive.pm: add step summary. remove steps
-	configureTimezone and configurePrinter, modify selectKeyboard
-
-	* install2.pm, timezone.pm, install_steps.pm: add step summary. remove
-	steps configureTimezone and configurePrinter
-
-	* netconnect.pm: corrected back $install call
-
-2001/02/10  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/keyboarddrake, share/keymaps_generate, keyboard.pm: 
-	  - lang2keyboards handle keyboard percentages
-	  - xmodmaps now named keyboards
-
-	* install_steps_interactive.pm: add step summary. remove steps
-	configureTimezone and configurePrinter, modify selectKeyboard
-
-	* standalone/draknet, standalone/XFdrake: corrected pkgs_install given
-
-	* install_any.pm: add preConfigureTimezone
-	add step summary. remove steps configureTimezone and configurePrinter
-
-	* install2.pm, timezone.pm, install_steps.pm: add step summary. remove
-	steps configureTimezone and configurePrinter
-
-	* install_interactive.pm: cleanup
-
-	* netconnect.pm: corrected back $install call
-
-2001/02/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, install2.pm,
-	timezone.pm: configureTimezone doesn't take parameter
-	/etc/sysconfig/clock
-
-2001/02/09  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm, interactive.pm, interactive_newt.pm: add button
-	handling, quite weird behaviour though cuz of newt sillyness
-
-	* install2.pm: configureTimezone doesn't take parameter
-	/etc/sysconfig/clock
-	(main): have compatibility with old stage1 (rhimage -> image)
-	(formatPartitions):
-	s|etc/sysconfig/consoletrans|etc/sysconfig/console/consoletrans|
-	as it should now be (see lang.pm 1.143)
-
-	* install_steps.pm, install_steps_interactive.pm, timezone.pm:
-	configureTimezone doesn't take parameter /etc/sysconfig/clock
-
-2001/02/09  siegel
-
-	* share/po/de.po: new german version
-
-2001/02/08  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakgw: implemented or updated embedded mode
-	added embedded and (ugly) wizard mode.
-
-	* standalone/printerdrake, standalone/mousedrake, standalone/diskdrake,
-	standalone/keyboarddrake: implemented or updated embedded mode
-
-	* standalone/draknet: implemented or updated embedded mode
-	added embedded mode
-
-	* standalone/XFdrake: implemented or updated embedded mode
-	corrected compilation bug.
-
-	* standalone/drakboot: implemented or updated embedded mode
-	updated embedded mode. Should work, not tested in real world
-
-	* netconnect.pm: removed testing wizard instruction
-
-2001/02/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* ftp.pm: fixed wrong URLPREFIX formation if no user given.
-
-	* standalone/XFdrake: fix the previous changelog wich was wrong (bad
-	spelling),
-	added a char in comment to allow a new release (thanks to pixel :-)
-	make sure SHARE_PATH is set.
-	fixed SHARE_PATH to make sure it is setted.
-
-	* Xconfigurator.pm: added DRI experimental support (sis, radeon). Prefer
-	XF3 for SiS card.
-
-	* pkgs.pm: fixed problem for updating hdlist after going back to partition
-	step.
-
-2001/02/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/config-stage1.h, mdk-stage1/network.c:
-	better memory detection (from wonderful drakx)
-
-2001/02/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Norwegian file
-
-2001/02/08  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (availableRamMB): cleanup
-
-	* standalone.pm, standalone/XFdrake: make sure SHARE_PATH is set now in
-	standalone
-
-2001/02/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed unknown package ARRAY... and locales selection
-	according to langs.
-
-	* modules.pm: fixed module name without text for SCSI configuration
-	dialog, add log.
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/probing.h, mdk-stage1/stage1.h,
-	mdk-stage1/tools.c, mdk-stage1/automatic.c, mdk-stage1/init.c,
-	mdk-stage1/probing.c, mdk-stage1/automatic.h, mdk-stage1/modules.c,
-	mdk-stage1/network.c: 
-	  - use description of network cards when you have to select between
-	interfaces; has accuracy even in the case of multiple interface for a
-	given kernel module
-	  - write down a small "shell" to change parameters on the fly (needs
-	compile option SPAWN_INTERACTIVE)
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): better fix for getting
-	max install size.
-	(choosePackages): call setSelectedFromCompssList with empty
-	compssUsersChoice meaning max
-
-	* common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB
-
-2001/02/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed unknown package ARRAY... and locales selection
-	according to langs.
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): better fix for getting
-	max install size.
-	(choosePackages): call setSelectedFromCompssList with empty
-	compssUsersChoice meaning max
-
-	* common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
-	8.0
-
-	* mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
-	hostname+domain
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
-	* detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
-	* install_steps_interactive.pm (miscellaneous): remove asking about
-	numlock and hd optimizations,
-	deprecates it (aka don't do anything)
-
-	* Xconfigurator.pm (main): don't need isLaptop anymore, use
-	detect_devices::hasPCMCIA
-
-	* bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
-	value of memsize
-	if given
-	(install): save CLEAN_TMP in sysconfig/system
-	(get_append, add_append): get or set an append value
-	(has_profiles, set_profiles): get or add an entry office for profiles,
-	also add prof=Home in
-	the default entry
-
-	* any.pm (setupBootloader): take care of profiles and memsize
-	(facesnames): only display icons capitalized. This goes along the new
-	mandrake_desk where capitalized named faces are the new one. [a-z].*
-	icons
-	being only kept for compatibility. (in case no capitalized icons
-	available
-	display everything (compatibility with old mandrake_desk)
-
-	* standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
-	* install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
-	taking care of
-	profiles and memsize. Now in any & bootloader
-	(miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
-	$o->{miscellaneous} anymore
-
-	* install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
-	* netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
-	* install2.pm (@installSteps): remove miscellaneous
-	(main): don't remove pcmcia modules anymore (not there anymore), remove
-	/sbin/stage1
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
-	8.0
-
-	* mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
-	hostname+domain
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
-	* detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
-	* install_steps_interactive.pm (miscellaneous): remove asking about
-	numlock and hd optimizations,
-	deprecates it (aka don't do anything)
-
-	* Xconfigurator.pm (main): don't need isLaptop anymore, use
-	detect_devices::hasPCMCIA
-
-	* bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
-	value of memsize
-	if given
-	(install): save CLEAN_TMP in sysconfig/system
-	(get_append, add_append): get or set an append value
-	(has_profiles, set_profiles): get or add an entry office for profiles,
-	also add prof=Home in
-	the default entry
-
-	* any.pm (setupBootloader): take care of profiles and memsize
-	(facesnames): only display icons capitalized. This goes along the new
-	mandrake_desk where capitalized named faces are the new one. [a-z].*
-	icons
-	being only kept for compatibility. (in case no capitalized icons
-	available
-	display everything (compatibility with old mandrake_desk)
-
-	* standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
-	* install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
-	taking care of
-	profiles and memsize. Now in any & bootloader
-	(miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
-	$o->{miscellaneous} anymore
-
-	* install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
-	* netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
-	* install2.pm (@installSteps): remove miscellaneous
-	(main): don't remove pcmcia modules anymore (not there anymore), remove
-	/sbin/stage1
-
-2001/02/07  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* share/rpmsrate: Add usbd to SYSTEM.
-
-2001/02/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: updated wizard mode, intro and other stuff
-
-	* interactive_gtk.pm, interactive.pm, my_gtk.pm: updated wizard mode
-
-	* share/logo-mandrake.xpm: new logo
-
-2001/02/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* http.pm, ftp.pm, pkgs.pm: now fully fixed ftp connection (and http too)
-	caused by forked DrakX
-	with latent ftp connection.
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
-	8.0
-
-	* mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
-	hostname+domain
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
-	* detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
-	* install_steps_interactive.pm (miscellaneous): remove asking about
-	numlock and hd optimizations,
-	deprecates it (aka don't do anything)
-
-	* Xconfigurator.pm (main): don't need isLaptop anymore, use
-	detect_devices::hasPCMCIA
-
-	* bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
-	value of memsize
-	if given
-	(install): save CLEAN_TMP in sysconfig/system
-	(get_append, add_append): get or set an append value
-	(has_profiles, set_profiles): get or add an entry office for profiles,
-	also add prof=Home in
-	the default entry
-
-	* any.pm (setupBootloader): take care of profiles and memsize
-	(facesnames): only display icons capitalized. This goes along the new
-	mandrake_desk where capitalized named faces are the new one. [a-z].*
-	icons
-	being only kept for compatibility. (in case no capitalized icons
-	available
-	display everything (compatibility with old mandrake_desk)
-
-	* standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
-	* install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
-	taking care of
-	profiles and memsize. Now in any & bootloader
-	(miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
-	$o->{miscellaneous} anymore
-
-	* install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
-	* netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
-	* install2.pm (@installSteps): remove miscellaneous
-	(main): don't remove pcmcia modules anymore (not there anymore), remove
-	/sbin/stage1
-
-2001/02/07  siegel
-
-	* share/po/de.po: new german version
-
-2001/02/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* ftp.pm: reworked ftp behaviour a bit for cooperative connection (avoid
-	opening
-	and closing connection too fast for each transaction). There seems
-	to be some problem for retrieving twice a package, this cause huge pause
-	between each transaction, the best is to avoid them so ?
-
-2001/02/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/stage1.c,
-	mdk-stage1/init.c, mdk-stage1/newt-frontend.c, mdk-stage1/network.c,
-	mdk-stage1/modules.c, mdk-stage1/disk.c: 
-	  - slighty change the message when exiting successfully from install,
-	to not mess with abnormal termination
-	  - get back dialog for hostname and domain in case of unable to guess
-	domain
-	  - try to resolve DNS if self-ip can't resolve, to guess domain
-	  - remember entries so that when there is a problem you don't have to
-	re-enter everything (ncurses sucking stuff in case of stdio-frontend..)
-	  - use larger buffer for list_directory since in /dev there can be
-	*many* files
-
-2001/02/05  dam's  <damien@mandrakesoft.com>
-
-	* Makefile.drakxtools, Makefile: added wizard.rc handling in Makfiles.
-
-	* standalone/draknet: added infos recovering.
-
-	* netconnect.pm: added load_conf() to recover saved infos from conffile.
-
-2001/02/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: removed abusive white char.
-	updated to use urpmi new format (change fakemedium to better label)
-	fixed frame buffer usage if not enabled (installation of Aurora)
-	clean up and remove unused code.
-
-	* ftp.pm: rebuild URLPREFIX as stage1 does not provide it anymore.
-
-	* pkgs.pm: updated to use urpmi new format (change fakemedium to better
-	label)
-
-	* Xconfigurator.pm: Removed Device3Dfx as it is no more.
-
-	* install_steps.pm: fixed frame buffer usage if not enabled (installation
-	of Aurora)
-	clean up and remove unused code.
-
-2001/02/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/list: updated list of gconv modules
-
-2001/02/05  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm (head_tail): fix usage
-
-	* interactive_gtk.pm (create_ctree): node_moveto done only if
-	node_is_visible is not full
-
-2001/02/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mar/mar-frontend.c: fix bug when creating marfiles with
-	file-not-found in args
-
-2001/02/04  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_newt.pm: fix adaptation to the terminal size, should now
-	work in 80x25
-
-	* Xconfigurator.pm (monitorConfiguration): better handling of auto_install
-
-	* install_steps_interactive.pm (choosePackages): don't call
-	chooseSizeToInstall even with experts
-
-	* install_steps_gtk.pm (charsetChanged): re-create steps window
-
-2001/02/03  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm, standalone/draknet, netconnect.pm: corrected module.conf
-	update, net conf saving, and no wizard by default.
-
-2001/02/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in
-	auto_installs
-
-	* install_steps_gtk.pm (charsetChanged): created, takes care of setting to
-	the right charset the windows
-
-	* install_steps_interactive.pm (selectLanguage): call charsetChanged
-
-	* share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"''
-	move ftp to SYSTEM so that it is installed
-
-	* Makefile: install cardmgr
-
-	* modules.pm (configure_pcmcia): cleanup
-
-2001/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in
-	auto_installs
-
-	* install_steps_gtk.pm (charsetChanged): created, takes care of setting to
-	the right charset the windows
-
-	* install_steps_interactive.pm (selectLanguage): call charsetChanged
-
-	* share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"''
-	move ftp to SYSTEM so that it is installed
-
-	* Makefile: install cardmgr
-
-	* modules.pm (configure_pcmcia): cleanup
-
-2001/02/02  dam's  <damien@mandrakesoft.com>
-
-	* share/wizard.rc: added rc file for wizard mode
-
-2001/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): better default for DDC probe
-	fails and
-	auto_install and not provided any info about the monitor
-
-	* my_gtk.pm (gtkcreate_xpm): error handling with error message
-
-	* share/rpmsrate: all GNOME and KDE moved out of GRAPHICAL_DESKTOP
-
-	* install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
-	/etc/sysconfig/i18n
-
-	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
-	/tmp/hdimage to /tmp/disk without even
-	telling, changing it back as i don't see any good reason for the move.
-
-	* install_any.pm (setPackages): in auto_installs, default to all groups
-	chosen, unless
-	compssUsersChoice exist. Won't change anything unless compssListLevel is
-	used of course
-
-	* Xconfigurator_consts.pm: add low_default_monitor for default of
-	auto_installs
-
-	* interactive_gtk.pm (ask_from_entries_refW): use gtkxpm
-
-	* Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
-	diskdrake.pm: using the new formatXiB
-
-	* detect_devices.pm (getCompaqSmartArray): adapted getCompaqSmartArray to
-	the fact that kernel
-	2.4 uses /proc/driver/array instead of /proc/array. Also adapted the
-	regexp now that ida/c0d0p? is no more at the beginning of the line.
-	(get): cleanup, remove hasIDE hasSCSI...
-
-	* common.pm (formatXiB): created, format a number in human readable format
-
-2001/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
-	/tmp/hdimage to /tmp/disk without even
-	telling, changing it back as i don't see any good reason for the move.
-
-2001/02/02  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm, standalone/draknet, netconnect.pm, my_gtk.pm,
-	standalone/diskdrake: recoded wizard mode
-	corrected some stuff.
-	trying not to break draknet for cooker snapshot
-
-2001/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): better default for DDC probe
-	fails and
-	auto_install and not provided any info about the monitor
-
-	* install_any.pm (setPackages): in auto_installs, default to all groups
-	chosen, unless
-	compssUsersChoice exist. Won't change anything unless compssListLevel is
-	used of course
-
-	* share/locales.tar.bz2: yet another LC_NUMERIC, seems like the previous i
-	chose was glibc-2.1 :-(
-	this one en_US and seems all right!
-
-	* Xconfigurator_consts.pm: add low_default_monitor for default of
-	auto_installs
-
-	* Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
-	diskdrake.pm: using the new formatXiB
-
-	* install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
-	/etc/sysconfig/i18n
-
-	* common.pm (formatXiB): created, format a number in human readable format
-
-	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
-	/tmp/hdimage to /tmp/disk without even
-	telling, changing it back as i don't see any good reason for the move.
-
-2001/02/01  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: new draknet snapshot. Still unuseable
-
-	* interactive_gtk.pm, netconnect.pm, my_gtk.pm: updated embedded mode in
-	install.
-
-2001/01/31  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corected translation and conflict.
-
-2001/01/31  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm: added missing die if modprobe failed on live upgrade.
-
-	* pkgs.pm: added rpmrebuilddb directory cleaning before, remove old rpm
-	file
-	if everything has been successfull.
-
-	* install_steps.pm: changed to clean selection for non expert as used for
-	group selection
-	because it is not cleaned, need better solution TODO.
-
-2001/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* standalone/draknet: Fixed English typos (in English you DON'T PUT SPACES
-	BEFORE COLON (:);
-	and it is "Profile" and not "Profil")
-	CV:
-	----------------------------------------------------------------------
-
-2001/01/31  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackagesTree): created, simple
-	ask_many_from_list to choose
-	individual packages
-	(choosePackages): log for debug
-	(choosePackages): don't ask to install in beginner. Max is chosen
-	(setRootPassword): help not based on installClass being server or not
-	(selectInstallClass): remove installClass choice (was
-	normal/devel/server)
-	(chooseGroups): fix for individual package selection flag
-
-	* netconnect.pm (get_net_device): more cleanup syntax
-	(get_net_device): cleanup syntax
-
-	* install_steps.pm (selectLanguage): warning for debug
-	(miscellaneousBefore): don't use installClass to decide to use
-	supermount
-	or not. Choice is done on $::corporate. Can't say "no supermount in
-	server
-	installs" anymore
-	(selectInstallClass): emptied
-	(setupSCSI): don't configure PCMCIA if there is no PCMCIA
-
-	* install_any.pm (g_auto_install): installClass removed
-	(setPackages): do not preselect compssUsers entries
-
-	* install2.pm (main): don't set installClass=normal meta_class desktop
-	(deprecated)
-	(miscellaneous): TYPE= removed (was installClass)
-	(selectInstallClass): don't set $o->{partitions}. diskdrake will have to
-	ask in a set of possibilities
-	($o): replace fclass by fbeginner and fexpert
-	($o): default security level to 2 since it can't be based on
-	installClass (deprecated)
-
-	* install_steps_gtk.pm: restore window size for time being
-
-	* pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate
-
-	* Xconfigurator.pm (main): better error message for auto_install failing
-
-	* interactive.pm (ask_many_from_list): fix sorting
-
-	* any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
-	drakx. Still
-	need finding the guilty
-
-2001/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: more kbd corrections
-	fixed soem keybopard values
-
-2001/01/31  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackagesTree): created, simple
-	ask_many_from_list to choose
-	individual packages
-	(choosePackages): log for debug
-	(choosePackages): don't ask to install in beginner. Max is chosen
-	(setRootPassword): help not based on installClass being server or not
-	(selectInstallClass): remove installClass choice (was
-	normal/devel/server)
-	(chooseGroups): fix for individual package selection flag
-
-	* install_steps.pm (selectLanguage): warning for debug
-	(miscellaneousBefore): don't use installClass to decide to use
-	supermount
-	or not. Choice is done on $::corporate. Can't say "no supermount in
-	server
-	installs" anymore
-	(selectInstallClass): emptied
-	(setupSCSI): don't configure PCMCIA if there is no PCMCIA
-
-	* install_any.pm (g_auto_install): installClass removed
-	(setPackages): do not preselect compssUsers entries
-
-	* install2.pm (main): don't set installClass=normal meta_class desktop
-	(deprecated)
-	(miscellaneous): TYPE= removed (was installClass)
-	(selectInstallClass): don't set $o->{partitions}. diskdrake will have to
-	ask in a set of possibilities
-	($o): replace fclass by fbeginner and fexpert
-	($o): default security level to 2 since it can't be based on
-	installClass (deprecated)
-
-	* install_steps_gtk.pm: restore window size for time being
-
-	* pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate
-
-	* Xconfigurator.pm (main): better error message for auto_install failing
-
-	* interactive.pm (ask_many_from_list): fix sorting
-
-	* any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
-	drakx. Still
-	need finding the guilty
-
-2001/01/30  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: new draknet. unstable
-
-	* netconnect.pm: updated
-	debugged network card configuration after pixelisation.
-
-2001/01/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c, mdk-stage1/newt-frontend.c: prevent from
-	trying to set progressbar to more than 100% (rescue is more compressed
-	than drakx)
-
-	* share/rpmsrate: add ldetect to config stuff I want to have on all
-	installs (lspcidrake)
-
-2001/01/30  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm, netconnect.pm, install_interactive.pm:
-	adapt format functions given to ask_from_listf. $_ is no more set
-
-	* mouse.pm (detect): replace commands::modprobe by modules::load as it
-	should (or??)
-
-	* perl2etags: adapt to new etags (emacs 21) format
-
-	* raid.pm (make): replace commands::modprobe by modules::load as it should
-	(or??)
-
-	* perl2fcalls (@exclude_calls): add Eth as dam's use it quite a lot in his
-	regexps
-
-	* share/locales.tar.bz2: misc/LC_NUMERIC tells to use "," as number
-	separator instead of ".".
-	The sheer result is:
-	"0.6" * 10  gives 0
-	"0,6" * 10  gives 6
-	
-	So i have overwritten misc/LC_NUMERIC with
-	/usr/share/locale/en/LC_NUMERIC and
-	it works nicely now :)
-
-2001/01/29  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakboot: corrected typo
-
-2001/01/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: 
-	  - deprecate "hdreiser.img" since we have room for "reiserfs.o" in
-	"hd.img"
-	  - following deprecation of "other.img", reintegrate big modules in
-	relevant boot disks
-
-2001/01/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/po/et.po: updated Estonian file
-
-2001/01/29  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (getCompaqSmartArray): /proc/array/ida0 can contain
-	more than one ida/c0d0p*
-
-2001/01/28  dam's  <damien@mandrakesoft.com>
-
-	* share/help.xpm, network.pm, ChangeLog, netconnect.pm: updated
-
-2001/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
-	bug causing reiserfs partitions
-	not to be displayed/asked for formatting. The default value being used.
-
-	* any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
-	bug causing reiserfs partitions
-	not to be displayed/asked for formatting. The default value being used.
-
-	* any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
-	bug causing reiserfs partitions
-	not to be displayed/asked for formatting. The default value being used.
-
-	* any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28  siegel
-
-	* share/po/de.po: new german version
-
-2001/01/26  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: updated embedded mode
-
-	* standalone/drakboot: added embedded mode
-
-2001/01/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/include/stdio.h: adjust include files to compile
-	bzlib
-
-	* mdk-stage1/stage1.c: restore passing of pcmcia info to stage2
-
-	* mdk-stage1/bzlib/compress.c, mdk-stage1/bzlib/bzlib.c,
-	mdk-stage1/bzlib/randtable.c, mdk-stage1/bzlib/huffman.c,
-	mdk-stage1/modules.c, mdk-stage1/bzlib/crctable.c,
-	mdk-stage1/bzlib/decompress.c, mdk-stage1/bzlib/Makefile,
-	mdk-stage1/bzlib/bzlib_private.h, mdk-stage1/tools.c,
-	mdk-stage1/Makefile, mdk-stage1/bzlib/blocksort.c: 
-	  - use bzlib instead of zlib to reduce overall size
-	  - take home my own bzlib code to (1) reduce code size with good
-	compile options (2) make it compile and link against dietlibc
-
-	* mdk-stage1/mar/mar-extract-only.c, mdk-stage1/mar/mar-extract-only.h,
-	mdk-stage1/mar/mar-frontend.c, mdk-stage1/mar/mar.h,
-	mdk-stage1/mar/Makefile: mar now uses bzlib, no more zlib
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: comply to new "mar -l" format
-
-2001/01/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): prepare for advertising...
-
-	* interactive_newt.pm (ask_from_entries_refW): major rework for new
-	format, still need work
-	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
-	NEWT_FLAG_HIDDEN
-	(myTextbox): wrap the text if needed
-	(myTextbox): use a vertical scrollbar if needed
-
-	* Newt/Newt.xs (newtFormAddGrid): new name for
-	newtGridAddComponentsToForm, swap
-	parameters for much better understanding
-	(newtListboxGetCurrent): returns a SV (together with
-	newtListboxAddEntry)
-	(newtListboxAddEntry): data is now a SV
-
-2001/01/26  siegel
-
-	* share/po/de.po: .
-
-2001/01/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): prepare for advertising...
-
-	* interactive_newt.pm (ask_from_entries_refW): major rework for new
-	format, still need work
-	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
-	NEWT_FLAG_HIDDEN
-	(myTextbox): wrap the text if needed
-	(myTextbox): use a vertical scrollbar if needed
-
-	* Newt/Newt.xs (newtFormAddGrid): new name for
-	newtGridAddComponentsToForm, swap
-	parameters for much better understanding
-	(newtListboxGetCurrent): returns a SV (together with
-	newtListboxAddEntry)
-	(newtListboxAddEntry): data is now a SV
-
-2001/01/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): prepare for advertising...
-
-	* interactive_newt.pm (ask_from_entries_refW): major rework for new
-	format, still need work
-	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
-	NEWT_FLAG_HIDDEN
-	(myTextbox): wrap the text if needed
-	(myTextbox): use a vertical scrollbar if needed
-
-	* Newt/Newt.xs (newtFormAddGrid): new name for
-	newtGridAddComponentsToForm, swap
-	parameters for much better understanding
-	(newtListboxGetCurrent): returns a SV (together with
-	newtListboxAddEntry)
-	(newtListboxAddEntry): data is now a SV
-
-2001/01/25  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: disable steps 'packages choice', 'configure X', and
-	'configure' 'printer'
-
-	* install_steps_interactive.pm: don't oblige user addition
-
-	* network.pm: display ethernet module
-
-	* netconnect.pm: network informations filled into
-	$prefix/var/lib/naat/configuration
-
-2001/01/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2: restore symlink /sbin/sh ->
-	/usr/bin/sh for stage2
-
-	* mdk-stage1/probing.h: better tightness of probing stuff
-
-	* mdk-stage1/probing.c: better tightness of probing stuff
-	print warning message when insmod of PCI-detected device fails
-
-	* mdk-stage1/stage1.c: 
-	  - mdk-stage1: now linux-2.4 uses floppy.o to access floppy drives
-	  - remove fat/vfat modules from some boot floppies now that we don't
-	need it anymore
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: re-integrate autoprobe of
-	tulip network cards, kernel-2.4 has strange way to classify some of its
-	net modules..
-
-2001/01/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: Waw, italian translator is very fast :)
-	updated Indonesian and Italian fiels
-
-	* share/po/id.po: updated Indonesian and Italian fiels
-
-	* share/locales.tar.bz2: added iso9 locale definitions
-
-	* lang.pm: fixed LANGUAGE for mk locale
-
-2001/01/25  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (spawnShell): fix error message
-
-2001/01/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2: 
-	  - clean up deprecated symlinks (insmod, rmmod, cardmgr)
-	  - remove unecessary device files
-
-	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
-	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
-	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
-	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
-	mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
-	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
-	mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
-	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
-	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
-	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
-	mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
-	mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia
-
-2001/01/24  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun
-
-	* install_steps.pm (afterInstallPackages): cleanup
-
-	* interactive.pm: better documentation of ask_from_entries_refH features
-	(entry)
-
-2001/01/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2: 
-	  - clean up deprecated symlinks (insmod, rmmod, cardmgr)
-	  - remove unecessary device files
-
-	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
-	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
-	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
-	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
-	mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
-	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
-	mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
-	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
-	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
-	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
-	mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
-	mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia
-
-2001/01/24  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun
-
-	* install_steps.pm (afterInstallPackages): cleanup
-
-	* interactive.pm: better documentation of ask_from_entries_refH features
-	(entry)
-
-2001/01/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated Greek file
-
-2001/01/22  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm, netconnect.pm: corrected slide bar, and
-	added network conf save in /root/networking.tmp
-
-2001/01/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: add automatic support in choice of NET device, in
-	case of multiple NET devices
-	consistent dot-terminated error messages, consistent no-dot log messages
-	re-put Netmask input per default (void entry -> automatic guess)
-
-	* mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/modules.c: consistent
-	dot-terminated error messages, consistent no-dot log messages
-
-2001/01/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/id.po: updated Indonesian file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/ko.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/pl.po, netconnect.pm, share/po/no.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated po files
-
-	* share/po/wa.po: updated po files
-	updated pot file
-
-	* install2.pm, lang.pm: fixed the places where console fonts and related
-	files are put under
-	/etc/sysconfig to the places really used by console-tools
-
-	* share/po/DrakX.pot: updated pot file
-
-	* share/po/hr.po: updated po files
-	updated Croatian file
-
-2001/01/22  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (read_rpmsrate): if $packages is undef, ignore it. That way,
-	read_rpmsrate
-	can be called standalone.
-
-	* network.pm, install_steps_interactive.pm, netconnect.pm, my_gtk.pm,
-	install_interactive.pm, install2.pm, partition_table.pm, install_any.pm,
-	any.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: $::beginner is
-	deprecated, replaced by !$::expert
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
-	network/ftp installs
-
-2001/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (create_ctree): fix case with formatted list
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's
-
-	* mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
-	network/ftp installs
-
-2001/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (create_ctree): fix case with formatted list
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's
-
-2001/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: fix remaining perror's
-
-	* mdk-stage1/stage1.c: fix remaining perror's
-	  - better msg in fatal errors
-	  - do not include code to spawn a shell for releases
-
-2001/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files
-
-2001/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectMouse): use ask_from_treelist_
-
-	* interactive.pm (ask_from_treelist_): created, split with the separator,
-	call translate on
-	words, then re-join.
-
-2001/01/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixes for CD not changeable.
-
-	* install_steps_interactive.pm: fixed unselect group and inoperant
-	individual package selection.
-	removed expert mode and install class.
-
-2001/01/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fixed obligation of relative large install, now
-	minimum is lesser.
-
-	* install_steps_gtk.pm: make sure no ratio above 1 can occur, still need
-	to see why as it happens
-	on install-abort-choices-install or
-	install-abort-choices-fs-format(none)-choices-install
-
-	* live_install: update live install to match /tmp/image instead of
-	/tmp/rhimage.
-
-2001/01/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm, install_any.pm: fixes with /tmp/rhimage and
-	/tmp/image.
-
-	* pkgs.pm: update to use new header file format in hdlist (added arch) but
-	depslist has not it...
-
-	* install2.pm: fixes with /tmp/rhimage and /tmp/image
-
-2001/01/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po: updated bulgarian file
-
-2001/01/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/url.c: use strrchr instead of doing it by hand
-
-	* mdk-stage1/insmod-busybox/busybox.h,
-	mdk-stage1/insmod-busybox/utility.c, mdk-stage1/insmod-busybox/insmod.c:
-	
-	  - replace remaining perror's with log_perror's
-	  - little code cleanup
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2,
-	mdk-stage1/stage1-data/stage1-with-sash.tar.bz2: add /dev/fd0
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/tools.c,
-	mdk-stage1/tools.h, mdk-stage1/disk.c, mdk-stage1/modules.c: 
-	  - add load of third party modules in Expert mode (PS rulz)
-
-2001/01/12  siegel
-
-	* share/po/de.po: updates
-
-2001/01/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fixed addUser for invocation of
-	any::ask_users.
-	fixed bad invocation of installation of X server.
-
-2001/01/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/cdrom.c: add more memory carefulness with CDROM install
-	  - add wait_message for initializing of CDROM's (it can be long when
-	it's SCSI)
-	  - print CDROM drive names (model) in dialogs
-
-	* mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/disk.c: 
-	  - fix behaviour with bad ISO images (DISK installs)
-	  - better dialogs for DISK installs
-
-2001/01/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: make lang list in format for tree-selector
-
-2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/disk.c: fix failing umount for DISK installs in some failing
-	loopback situations
-	act nicely when no partitions are found on some disk
-
-	* mdk-stage1/modules.h: polish generic blank.img situation (no modules
-	and/or modules.dep available)
-
-	* mdk-stage1/lomount.c: fix failing umount for DISK installs in some
-	failing loopback situations
-	better log messages
-	continue anyway when insmod'ing of modules fail (for blank.img)
-
-	* mdk-stage1/probing.c: close some fd's
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.c: polish generic blank.img
-	situation (no modules and/or modules.dep available)
-	continue anyway when insmod'ing of modules fail (for blank.img)
-
-2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile, mdk-stage1/disk.c: 
-	  - add DISK install from ISO image file
-	  - add FTP
-	  - add HTTP
-	  - use single place for mountpoints and static directories
-
-	* mdk-stage1/hack, mdk-stage1/lomount.c, mdk-stage1/lomount.h: 
-	  - add DISK install from ISO image file
-
-	* mdk-stage1/stage1.c, mdk-stage1/config-stage1.h, mdk-stage1/stage1.h,
-	mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c,
-	mdk-stage1/tools.h, mdk-stage1/newt-frontend.c, mdk-stage1/network.c: 
-	  - add FTP
-	  - add HTTP
-	  - use single place for mountpoints and static directories
-
-	* mdk-stage1/insmod-busybox/Config.h: tweak config
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/adduserdrake: adduserdrake may handles autologin
-
-	* install_steps.pm (addUser): set autologin
-
-	* install2.pm (addUser): moved setAuthentication to install_steps::addUser
-
-	* install_steps_interactive.pm (addUser): fix
-
-2001/01/11  dam's  <damien@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, ChangeLog,
-	netconnect.pm: updated
-
-2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: remove nasty messages when
-	mar or marfiles not available to perform consistency check
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
-	add 'XFree86-' at the beginning
-	(addUser): use any::write_passwd_user
-	(setRootPassword): use any::write_passwd_user
-	(configureX): fix bad $install given to Xconfigurator::main
-
-	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
-	(ask_users): created, interactively ask users to add (used in
-	adduserdrake and install)
-	(allocUsers, addUsers): changed the prototype
-	(setupBootloader): grep out fat partitions for the "Boot device"
-	propositions (people are too stupid)
-
-	* my_gtk.pm (main): third argument is a function to call before leaving in
-	case of
-	"cancel" clicked.
-
-	* interactive_gtk.pm (create_ctree): fix default value selecting failing
-	(in case of "format")
-	(ask_from_entries_refW): apply "format" on label when icon is missing
-	for iconlist
-	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
-	the cancel.
-
-	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
-	modifying it
-
-	* install_steps_interactive.pm (addUser): use any::ask_users
-
-	* standalone/adduserdrake: use any::ask_users
-
-	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
-	install2::main)
-
-	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
-	here
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
-	callback defaults
-	to "sub { 0 }"
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
-	icon is missing for iconlist
-	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
-	the cancel.
-
-	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
-	add 'XFree86-' at
-	the beginning
-	(addUser): use any::write_passwd_user
-	(setRootPassword): use any::write_passwd_user
-	(configureX): fix bad $install given to Xconfigurator::main
-
-	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
-	(ask_users): created, interactively ask users to add (used in
-	adduserdrake
-	and install)
-	(allocUsers, addUsers): changed the prototype
-	(setupBootloader): grep out fat partitions for the "Boot device"
-	propositions (people are too stupid)
-
-	* my_gtk.pm (main): third argument is a function to call before leaving in
-	case of
-	"cancel" clicked.
-
-	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
-	modifying it
-
-	* install_steps_interactive.pm (addUser): use any::ask_users
-
-	* standalone/adduserdrake: use any::ask_users
-
-	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
-	install2::main)
-
-	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
-	here
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
-	callback defaults
-	to "sub { 0 }"
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): moved to package any
-
-	* interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
-	icon is missing for iconlist
-	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
-	the cancel.
-
-	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
-	add 'XFree86-' at
-	the beginning
-	(addUser): use any::write_passwd_user
-	(setRootPassword): use any::write_passwd_user
-	(configureX): fix bad $install given to Xconfigurator::main
-
-	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
-	(ask_users): created, interactively ask users to add (used in
-	adduserdrake
-	and install)
-	(allocUsers, addUsers): changed the prototype
-	(setupBootloader): grep out fat partitions for the "Boot device"
-	propositions (people are too stupid)
-
-	* my_gtk.pm (main): third argument is a function to call before leaving in
-	case of
-	"cancel" clicked.
-
-	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
-	modifying it
-
-	* Makefile.config (STANDALONEPMS): remove netdrake (which is deprecated)
-
-	* install_steps_interactive.pm (addUser): use any::ask_users
-
-	* standalone/adduserdrake: use any::ask_users
-
-	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
-	install2::main)
-
-	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
-	here
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
-	callback defaults
-	to "sub { 0 }"
-
-2001/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/dietfeatures.h: tweak dietlibc config to get minimal
-	size
-
-	* mdk-stage1/dietlibc/lib/vsscanf.c, mdk-stage1/dietlibc/lib/ttyname.c:
-	remove warnings from compile
-
-2001/01/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
-	callback on clist/list/ctree
-
-	* install_steps.pm (addUser): use any::pack_passwd
-	(setRootPassword): use any::unpack_passwd and any::pack_passwd
-
-	* Xconfigurator.pm (cardConfiguration): adapt for $install which is
-	generic
-	(autologin): use $install which is now generic
-
-	* install_steps_interactive.pm (selectLanguage): many_languages choice
-	moved there as advanced
-
-	* my_gtk.pm (create_packtable): yet another try to have something nice :)
-	!! uses Gtk::Table::attach_raw which is available in
-	perl-GTK-0.7004-6mdk !!
-	(create_box_with_title): with the size given to set_usize for the scroll
-	containing the text widget in case of long text. and don't let the
-	scroll
-	grow.
-	(gtktext_insert): remove adding an ending "\n" (no more needed?)
-
-	* any.pm (setAutologin): cleanup
-	(pack_passwd, unpack_passwd): created
-
-2001/01/10  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm: corrected last message . firewall
-
-2001/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: fix modules.pm for modules to be skept in stage1 (ppa, imm,
-	parport*, plip)
-
-2001/01/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
-	callback on clist/list/ctree
-
-	* install_steps.pm (addUser): use any::pack_passwd
-	(setRootPassword): use any::unpack_passwd and any::pack_passwd
-
-	* my_gtk.pm (create_packtable): yet another try to have something nice :)
-	!! uses Gtk::Table::attach_raw which is available in
-	perl-GTK-0.7004-6mdk !!
-	(create_box_with_title): with the size given to set_usize for the scroll
-	containing the text widget in case of long text. and don't let the
-	scroll
-	grow.
-	(gtktext_insert): remove adding an ending "\n" (no more needed?)
-
-	* any.pm (setAutologin): cleanup
-	(pack_passwd, unpack_passwd): created
-
-	* Xconfigurator.pm (cardConfiguration): adapt for $install which is
-	generic
-	(autologin): use $install which is now generic
-
-	* install_steps_interactive.pm (selectLanguage): many_languages choice
-	moved there as advanced
-
-	* standalone/printerdrake, standalone/keyboarddrake, standalone/draknet2,
-	standalone/livedrake, standalone/drakboot, standalone/draksec,
-	standalone/netdrake, standalone/mousedrake, standalone/drakgw,
-	standalone/drakxservices, standalone.pm, standalone/draknet,
-	standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake,
-	standalone/drakxconf: use standalone and standalone::pkgs_install
-
-2001/01/09  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (drakx_version): nicer (4gc)
-
-	* install2.pm (main): log::l the drakx_version
-
-	* my_gtk.pm (create_packtable): no_expand option added
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): field
-	"disabled" added,
-	"advanced_messages" added
-
-	* lang.pm (langs): created (transform the $o->{langs} hash ref in a list)
-	(pack_langs): use lang::langs
-
-	* install_steps.pm (selectLanguage): $o->{langs} is now a ref so
-	initialize as such
-
-	* Makefile (get_needed_files): generate /usr/share/VERSION which contains
-	the version
-	of ChangeLog (which is updated at each upload)
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): handle "check
-	for bad blocks" as advanced
-	(setRootPassword): remove choosing non-md5 or non-shadow passwords.
-
-	* install_any.pm (setPackages): use lang::langs instead of using
-	$o->{langs} as a array ref (it is not so anymore)
-	(spawnShell): print the drakx_version
-
-2001/01/08  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: fixes
-	(ask_from_treelistf, ask_from_treelist): now use ask_from_entries_refH
-	(ask_from_entries_refH_powered): remove "1;" (was there for debugging)
-
-	* interactive_gtk.pm: fixes
-	(ask_from_treelistW): removed
-	(create_ctree): created, used for ``type => treelist'' entries
-
-	* my_gtk.pm: fixes
-
-	* ChangeLog: New snapshot uploaded
-
-2001/01/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sr.po, share/po/sp.po, share/po/no.po, share/po/cs.po: updated
-	Czech, Norwegian and Serbian files
-
-2001/01/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: update code for new ask_from_entries_refH
-	which doesn't handle optional ok/cancel names in arg 1.
-	must be handled via ask_from_entries_refH_powered
-	(selectLanguage, selectKeyboard): use ask_from_entries_refH instead of
-	ask_from_listf_, it enables the use of advanced
-
-	* any.pm, printerdrake.pm: update code for new ask_from_entries_refH which
-	doesn't handle optional ok/cancel names in arg 1.
-	must be handled via ask_from_entries_refH_powered
-
-	* interactive.pm: update code for new ask_from_entries_refH which doesn't
-	handle optional ok/cancel names in arg 1.
-	must be handled via ask_from_entries_refH_powered
-	(ask_from_listf_no_check): replaces ask_from_list_no_check
-	(ask_from_entries_refH_powered): sorts the list if needed or wanted
-
-	* partition_table_raw.pm (test_for_bad_drives): created
-	- ugly stuff needed mainly for Western Digital IDE drives
-	- try writing what we've just read, yells if it fails
-	- testing on last sector of head #0 (unused in 99% cases)
-
-	* ftp.pm (getFile): make it work (it used to dead-loop when getFile'ing an
-	non-existent
-	file, stressing the ftp server :-/ )
-	for the moment, just release cdrom.img, hd.img and hdreiser.img
-	others should should come...
-
-	* install_steps.pm: for the moment, just release cdrom.img, hd.img and
-	hdreiser.img
-	others should should come...
-
-	* interactive_gtk.pm (ask_from_listW): removed
-	(create_list): calls "format" on list elems before prompting them
-	(create_clist): created
-	(ask_from_entries_refW): calls create_clist in case of list with no help
-
-	* install_steps_gtk.pm (installPackages): autoflush stdout before beeping
-	(installPackages): don't take into account the time when prompting the
-	user
-
-	* common.pm (may_apply): added
-
-	* install_any.pm (getHds): test_for_bad_drives called on hard drives
-	(getHds): ensure $o->{hds} is not set until the hard drives are checked
-
-2001/01/06  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
-	* ChangeLog: New snapshot uploaded
-	New snapshot uploaded
-
-2001/01/06  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
-	* ChangeLog: New snapshot uploaded
-
-2001/01/06  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
-	* standalone/rpmdrake: deprecated (and has been for a long time now)
-
-	* network.pm, install_steps_interactive.pm, netconnect.pm,
-	install_interactive.pm, standalone/adduserdrake, any.pm,
-	Makefile.config, printerdrake.pm, Xconfigurator.pm, diskdrake.pm:
-	ask_from_entries_refH parameter format has changed so change all
-	accesses to it.
-
-2001/01/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: forget _exit in child process after a fork of
-	DrakX
-	removed need of packdrake binary
-
-	* Xconfigurator.pm: use of SHARE_PATH for MonitorsDB, Cards+, CardsNames
-
-	* live_install2: cleanup to keep libperl.so but the right one
-
-	* live_install: no more copy of files on live system, now use environment
-	variable by DrakX cleanup
-
-	* perl2fcalls: added packdrake call (via new but incomplete) and package
-
-	* install_any.pm, commands.pm, pkgs.pm: removed need of packdrake binary
-
-	* netconnect.pm: fixed syntax error
-
-	* modules.pm: eval insmoding ide-cd (just in case)
-	removed need of packdrake binary
-
-2001/01/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po, share/po/ca.po, share/po/az.po: updated Azeri, Catalan
-	and Japanese files
-
-2001/01/05  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm: help cperl-mode
-
-	* interactive_gtk.pm, network.pm, install_steps_interactive.pm, my_gtk.pm,
-	interactive.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: move to
-	new ask_from's:
-	- ask_from_entries_ref is deprecated, use ask_from_entries_refH
-	- ask_from_list now calls ask_from_entries_refH_powered
-	still not done:
-	- ask_from_treelist should use ask_from_entries_refH_powered,
-	and lists with no help should use CList (List is bad)
-	- keyboard and mouse binding is still rough
-	- enhance the look
-
-	* keyboard.pm: add the percentage of each keyboard types (as a comment for
-	now)
-
-2001/01/04  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: cleaned... everything should be buggy.
-
-2001/01/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed some old $p->{file} by new $p->[$FILE]
-	code cleanup and fixes for lilo not upgrade
-
-2001/01/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* install_any.pm: fixed the functions doing the lists of languages
-
-	* lang.pm: fixed the functions doing the lists of languages
-	The list of languages now has complete locale names insted of just
-	language
-	code (that is needed to differentiate zh_CN and zh_TW among others)
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated Brazilian file
-
-	* share/po/eu.po: updated Basque file
-	updated Brazilian file
-
-2001/01/04  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: some pixelization using the new if_
-
-	* install_steps_interactive.pm (setRootPassword): fix pixelization
-	keep $o->{langs} unpacked to simplify things
-	if_ pixelization
-
-	* common.pm (%EXPORT_TAGS): add if_ in "common" exported tags
-	(if_): created. Use it to replace things like
-	($::expert ? $val : ()) by if_($::expert, $val)
-
-	* keyboard.pm: nl keyboard is not used, so defaults to us_intl
-
-	* lang.pm, install_steps.pm, pkgs.pm, install_any.pm: keep $o->{langs}
-	unpacked to simplify things
-
-	* netconnect.pm: quite a few clean-up (and buggying)
-
-2001/01/03  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm: admin user removed before beeing added
-
-	* netconnect.pm: corrected typo
-	LAN is configured with default value if firewall
-
-2001/01/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: fixed invocation of change_type by clicking on legend
-	unless expert
-
-	* install2.pm: fixed usage with testing
-
-	* install_steps.pm: fixed some other services to start in case something
-	gets wrong,
-	this fixes some deadlock on upgrade from 7.0.
-	fixed usage with testing
-
-	* partition_table.pm: fixed overlapping partitions between one extended
-	and one regular primary.
-	should be accepted (log printed instead of error) as diskdrake allow
-	their
-	creation in expert.
-
-2001/01/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: add checks of dependencies on marfiles
-	fix a couple of broken dependencies in modules.pm
-
-2001/01/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/locales.tar.bz2: locales in glibc 2.2 format
-
-2001/01/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): move the setting of PATH and spawnShell *after*
-	setting $prefix
-
-2000/12/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: added a few locales dependences
-
-2000/12/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (addUser): typo fix
-
-	* ChangeLog: New snapshot uploaded
-
-	* ftp.pm (getFile): recall getFile after rewindGetFile
-
-2000/12/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (addUser): typo fix
-
-	* ftp.pm (getFile): recall getFile after rewindGetFile
-
-2000/12/28  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: now /usr/lib/X11 is a relative symlink to please mirrors and
-	jako
-
-2000/12/26  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* keyboard.pm: Add the very ghost option REMOVE_MOD_META_L.
-
-2000/12/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Lithuanian file
-
-2000/12/22  dam's  <damien@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm: corrected admin user
-	setting for firewall install.
-
-2000/12/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm: fixed load_multi on live.
-	added back all removed module with the new great mdk-stage1 of g�g�.
-
-2000/12/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: make them work with kernel-2.4 by disabling non existent
-	modules
-
-2000/12/22  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm, install2.pm: commit symlink /tmp/image /tmp/rhimage
-
-2000/12/21  Pixel  <pixel@mandrakesoft.com>
-
-	* ChangeLog: New snapshot uploaded
-
-2000/12/21  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: firewall : automatic class set when firewall (beginner=0)
-
-	* install_steps_interactive.pm: if firewall, admin password obliged
-
-	* install_steps.pm: added setAdminpassword (a little bit redundant, sorry)
-
-	* any.pm: corrected module stuff.. Thanx to pixel
-
-2000/12/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (selectMouse): unsure the device exists
-
-	* unused/christmas-karaoke.patch: handle isa cards
-
-2000/12/19  Pixel  <pixel@mandrakesoft.com>
-
-	* ChangeLog: New snapshot uploaded
-	New snapshot uploaded
-
-2000/12/19  dam's  <damien@mandrakesoft.com>
-
-	* standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
-	standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
-	standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
-	standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
-	standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
-	standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
-	standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
-	standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
-	standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
-	standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
-	standalone/pixmaps/draknet3.xpm: added control-center.
-
-2000/12/19  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: when loading /snd-card-/ module, load snd-pcm-oss
-
-	* unused/christmas-karaoke.patch: Happy Christmas :)
-
-	* install_any.pm: spawnShell: set DISPLAY, just in case :)
-
-	* install2.pm: set PATH before doing spawnShell
-
-	* Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)
-
-	* ChangeLog: New snapshot uploaded
-
-2000/12/18  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: added embedded support for control-center
-	corrected embedded support.
-	new control center and related
-
-	* netconnect.pm: corrected typo
-	corrected typo
-
-	* standalone/drakxservices, standalone/control-center, ChangeLog,
-	standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
-	standalone/drakboot: new control center and related
-
-	* install_gtk.pm: added firewall support
-
-	* install2.pm: included firewall handling
-	changed firewall comportement
-
-	* install_steps_interactive.pm: changed firewall comportement
-
-	* modules.pm: corrected bad mergeinconf
-
-2000/12/18  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
-	cfI/xfI
-	remove isdndb.net
-
-2000/12/19  dam's  <damien@mandrakesoft.com>
-
-	* standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
-	standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
-	standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
-	standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
-	standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
-	standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
-	standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
-	standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
-	standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
-	standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
-	standalone/pixmaps/draknet3.xpm: added control-center.
-
-2000/12/19  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: when loading /snd-card-/ module, load snd-pcm-oss
-
-	* unused/christmas-karaoke.patch: Happy Christmas :)
-
-	* install_any.pm: spawnShell: set DISPLAY, just in case :)
-
-	* install2.pm: set PATH before doing spawnShell
-
-	* Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)
-
-2000/12/18  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: added embedded support for control-center
-	corrected embedded support.
-	new control center and related
-
-	* netconnect.pm: corrected typo
-	corrected typo
-
-	* standalone/drakxservices, standalone/control-center, ChangeLog,
-	standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
-	standalone/drakboot: new control center and related
-
-	* install_gtk.pm: added firewall support
-
-	* install2.pm: included firewall handling
-	changed firewall comportement
-
-	* install_steps_interactive.pm: changed firewall comportement
-
-	* modules.pm: corrected bad mergeinconf
-
-2000/12/18  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
-	cfI/xfI
-	remove isdndb.net
-
-2000/12/16  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/mousedrake, standalone/drakgw: use ldetect-lst
-
-	* Makefile.drakxtools: fix daminetsex
-	use ldetect-lst
-	pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-	* share/list: use ldetect-lst
-	pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-	* any.pm: fix daminetsex
-
-	* modules.pm, live_install, install2.pm, standalone/lspcidrake, pkgs.pm,
-	mouse.pm: use ldetect-lst for usb => now auto detects mice types :)
-
-	* c/stuff.xs.pm, detect_devices.pm: use ldetect-lst for usb => now auto
-	detects mice types :)
-	use ldetect-lst
-	pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-	* Makefile.config: fix daminetsex
-	use ldetect-lst
-
-	* Makefile: use ldetect-lst for usb => now auto detects mice types :)
-	use ldetect-lst
-
-	* netconnect.pm, share/CardsNames, c/Makefile.PL, Xconfigurator_new.pm,
-	Xconfigurator.pm, share/Cards+, share/MonitorsDB, share/isdndb.net,
-	share/Cards2CardsNames: pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-2000/12/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: Cards+ and CardsNames are moved to ldetect-lst
-
-	* install_steps.pm: clean all unneeded stuff
-
-2000/12/14  dam's  <damien@mandrakesoft.com>
-
-	* any_new.pm, netconnect_new.pm: preparing for big jump.
-
-	* netconnect.pm: Big jump. The *_new.pm are replaced by *.pm
-	Everything should work, but you better test :)
-
-	* standalone/control-center: big improvement and cosmetic changes
-	a lot of improvement. Is able to launch multiples soft passing in
-	arguments.
-	new file. Its location should change soon.
-
-	* any.pm: Big jump. The *_new.pm are replaced by *.pm
-	Everything should work, but you better test :)
-	corrected typo.
-
-2000/12/14  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssList: obsoleted by rpmsrate
-
-	* share/rpmsrate: obsoletes compssList
-
-	* share/compssUsers, install_steps.pm, install_steps_interactive.pm,
-	Makefile, install_steps_gtk.pm, install2.pm, pkgs.pm, install_any.pm:
-	move from compssList to rpmsrate
-
-	* Newt/Newt.xs: cleanup (use of alloca to pass parameters)
-
-2000/12/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: updated Italian file
-
-2000/12/12  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: typo + if firewall, don't display 'disable network'
-
-	* standalone/draknet2: new version... still working on it
-
-	* ChangeLog: commit
-
-	* share/themes-mdk-Firewall.rc: added firewall theme
-
-	* modules.pm: my fault, corrected renaud's patch incorporation
-
-	* share/logo-mandrake-Firewall.xpm: new logo
-
-2000/12/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/list: added packdrake.pm as packdrake has been splited.
-
-	* pkgs.pm: fixed versionCompare to always return number. added checking of
-	version to
-	select obsoletes on upgrade.
-
-2000/12/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: Radeon uses 3D now.
-
-	* lang.pm: fixed write_langs for upgrade.
-	i18n sucking fixes.
-
-	* Xconfigurator.pm: Radeon uses 3D hw accel theoritically now.
-
-2000/12/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: Added configuration of Vietnamese input server
-
-2000/12/09  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/adduserdrake: remove debugging code
-
-	* install2.pm (selectInstallClass): give $clicked to selectInstallClass
-
-	* interactive_newt.pm (ask_from_entries_refW): reset all hidden entries to
-	null in case of error
-	on hidden entry cuz newt doesn't display null entries, disturbing
-
-	* install_steps_interactive.pm (formatMountPartitions): the format
-	partition dialog created at first use,
-	so that it doesn't appear if no partitions are formatted.
-	(selectInstallClass): ensure expert choice is kept if it was prechosen
-	(selectInstallClass): if expert pre-chosen, ensure expert is kept
-
-	* interactive_gtk.pm, install_steps.pm: small renicing
-
-2000/12/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed bug in list of packages provided by another one.
-
-2000/12/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/no.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/wa.po, share/po/da.po, share/po/de.po,
-	share/po/az.po, share/po/tr.po: updated Brazilian file
-
-2000/12/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): warn if VERSION file doesn't exist
-	(formatPartitions): call rotate_logs after mounting the partitions
-
-	* mouse.pm (write_conf): fix to make make test_pms happy
-
-	* install_steps.pm (exitInstall): save the report.bug in /root/report.bug
-
-	* any.pm (rotate_logs): created, rotates ddebug.log and install.log in
-	/root
-
-	* ftp.pm (new): retry in case of ftp connection/login
-
-	* commands.pm: report_bug: created, returns a string
-
-2000/12/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected ADSL connection choice.
-	corrected typo
-
-2000/12/06  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: erare humanum es
-	firewall begins to infect the install :).
-	new meta_class.
-
-	* share/logo-mandrake-Firewall.xpm: aded logo for firewall
-
-	* install_gtk.pm: corrected errors
-	left pixmap centered if firewall
-	improved the firewall theme.
-	errare humanum es
-	firewall infects the install.
-	The logo is changed if firewall.
-
-2000/12/06  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/keyboarddrake: add possibility to use keyboarddrake
-	non-interactive (aka give the keyboard as
-	first parameter)
-
-	* lang.pm, install_steps.pm, install_steps_interactive.pm, install2.pm,
-	install_any.pm: adapt to the fact that RPM_INSTALL_LANG is obsoloted.
-	Now rpm uses %_install_langs in /etc/rpm/macros
-
-2000/12/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: final fixes to versionCompare to make sure no deadlock can
-	occurs.
-
-	* Xconfigurator.pm: restored Matrox G200/G400 hw 3d accel configuration.
-
-2000/12/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/pl.po, share/po/da.po, share/po/fi.po,
-	share/po/es.po: updated several pofiles
-
-2000/12/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: use isCdNotEjectable.
-
-	* common.pm: added function isCdNotEjectable.
-
-	* share/Cards+: SiS620 card are said to be unsupported by XF4.
-
-	* pkgs.pm: load only one hdlist in memory if CD is not ejectable (low
-	memory).
-	fixed compareVersion for deadlock. removed silly CODE print on deporder
-	problems.
-
-	* Xconfigurator.pm: add Options sw_cursor for SiS 6326 in XF3 mode.
-
-2000/12/03  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: incorporated cmodifications in the firewall branch
-
-	* netconnect.pm: netconnect_new > netconnect.pm
-
-	* netconnect_consts.pm: incorporated in the firewall branch.
-
-	* standalone/draknet2: incoporated in the firewall branch
-
-	* any_new.pm: any_new > any, so we remove it now.
-
-	* netconnect_new.pm: netconnect_new > netconnect, so we remove it now.
-	incorporated in the firewall branch
-
-	* modules.pm: incorporated modifications to the firewall branch. Hope they
-	won't break anything...
-
-2000/12/02  dam's  <damien@mandrakesoft.com>
-
-	* share/po/az.po: correction in firewall incorporated
-
-	* ChangeLog: first attempt ro build the firewall install
-
-	* standalone/mousedrake: incorporated in the firewall branch
-
-	* share/po/ru.po, share/po/no.po, share/po/sk.po: correction incorporated
-	in the firewall branch
-
-2000/11/28  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: included reno's patches. Now should work without kudzu.
-	branch to build the firewall install.
-
-	* standalone/pixmaps/port.xpm, standalone/pixmaps/.xvpics/px4.xpm,
-	standalone/pixmaps/ethernet.xpm, standalone/pixmaps/.xvpics/px1.xpm,
-	standalone/pixmaps/px2.xpm, standalone/pixmaps/unknown.xpm,
-	standalone/pixmaps/.xvpics/px3.xpm, standalone/pixmaps/px4.xpm,
-	standalone/pixmaps/px1.xpm, standalone/pixmaps/.xvpics/px2.xpm,
-	standalone/pixmaps/px3.xpm, standalone/pixmaps/modem.xpm,
-	standalone/pixmaps/isdn.xpm: Initial revision
-	branch to build the firewall install.
-
-	* partition_table_dos.pm, share/po/bg.po, share/po/sr.po,
-	share/template.in/cdrom.kdelnk.in,
-	share/template.in/cdrom.fsdev.kdelnk.in, share/po/hr.po, c/silo.c,
-	Makefile, share/consolefonts/lat0-sun16,
-	share/themes/DarkMarble-check_off.png,
-	share/themes/marble3d-button_def.png, share/locales.tar.bz2.sparc,
-	do_resize_fat, share/po/wa.po, share/po/is.po,
-	share/themes/DarkMarble-button3_out_prelight.png, resize_fat/main.pm,
-	class_discard.pm, .cvsignore, share/step-orange.xpm, share/reload.xpm,
-	install_interactive.pm, c/README, Xconfig.pm, share/themes.rc,
-	share/themes/marble3d-bg1.png, perl2fcalls, share/themes-blackwhite.rc,
-	share/themes-blueHeart.rc, pkgs.pm, keyboard.pm,
-	share/rpm-installed.xpm, share/po/gl.po, share/po/lv.po,
-	standalone/icons/ftout.xpm, Makefile.drakxtools, http.pm,
-	share/step-green-click.xpm, partition_table_sun.pm,
-	share/themes/focus.png, share/keymaps_generate, lang.pm, verify_c,
-	share/po/.cvsignore, share/ftin.xpm, standalone/draksec,
-	resize_fat/info_sector.pm, share/compssUsers, share/step-orange-on.xpm,
-	Makefile.config, share/list.sparc, share/po/hu.po, run_program.pm,
-	share/themes/marble3d-button4.png, share/rpm-unselected.xpm,
-	share/list.i386, netconnect.pm, share/themes/DarkMarble-button3_out.png,
-	c/md5_crypt.c, share/themes/mdk-toggle_on.png, partition_table.pm,
-	standalone/livedrake, share/diskdrake.rc,
-	share/themes/DarkMarble-check_on.png, standalone/draknet,
-	share/po/br.po, Newt/typemap, share/themes/blueHeart-button2.png,
-	share/po/ro.po, share/list, share/po/cs.po, share/po/be.po,
-	share/po/sp.po, share/step-orange-click.xpm, modparm.pm,
-	share/step-green.xpm, share/rpm-base.xpm,
-	share/themes/marble3d-check1.png, crypto.pm, share/po/eu.po,
-	share/themes/marble3d-button1.png, c/stuff.pm, install_steps.pm,
-	share/Cards2CardsNames, Newt/Makefile.PL,
-	share/themes/mdk-Desktop-bg.png, netconnect_consts.pm, share/po/id.po,
-	share/themes/mdk-check_on.png, share/po/fi.po, share/po/sk.po,
-	standalone/icons/findf.xpm, share/po/lt.po,
-	share/themes/mdk-check_off.png, fs.pm, c/.cvsignore,
-	share/themes/mdk-toggle_off.png, share/po/ca.po, timezone.pm,
-	detect_devices.pm, share/consolefonts/ruscii_8x16, diskdrake.pm,
-	standalone/icons/reload.xpm, share/rpm-selected.xpm, resize_fat/io.pm,
-	Newt/Newt.xs, Newt/.cvsignore, install2, share/po/pt_BR.po,
-	share/themes-marble3d.rc, resize_fat/fat.pm, sbus_probing/main.pm,
-	share/template.in/floppy.fsdev.kdelnk.in, printer.pm, share/po/it.po,
-	resize_fat/.cvsignore, install_steps_interactive.pm,
-	share/themes/mdk-button4.png, live_install, standalone/draknet2,
-	any_new.pm, share/list.alpha, share/rpm-semiselected.xpm, c.pm,
-	share/logo-mandrake-Desktop.xpm, printerdrake.pm, network.pm,
-	share/step-red-on.xpm, share/themes-mdk.rc, share/po/validate.pl,
-	swap.pm, share/themes/blueHeart-button4.png, standalone/keyboarddrake,
-	g_auto_install, share/po/es.po, standalone/lspcidrake, share/po/de.po,
-	partition_table_mac.pm, standalone/mousedrake, devices.pm,
-	share/po/ru.po, resize_fat/c_rewritten.xs, share/po/cy.po,
-	share/themes/mdk-button1.png, netconnect_new.pm, install_any.pm,
-	share/po/nl.po, share/aliases, share/keyboards.tar.bz2, share/po/sv.po,
-	Newt/Av_CharPtrPtr.c, c/stuff.xs.pm, share/themes-DarkMarble.rc,
-	share/step-red.xpm, Newt/Av_CharPtrPtr.h, c/smp.c,
-	share/po/zh_CN.GB2312.po, commands.pm, standalone/icons/find.xpm,
-	perl2etags, share/po/Changelog, standalone/drakboot,
-	resize_fat/dir_entry.pm, share/fonts.tar.bz2, share/install.rc,
-	share/themes/blueHeart-button1.png, share/Cards+, share/po/uk.po,
-	share/MonitorsDB, share/template.in/Dos_.kdelnk.in,
-	standalone/printerdrake, services.pm, share/kmap2bkmap,
-	share/themes/blueHeart-button_def.png, share/po/az.po, share/po/tr.po,
-	common.pm, getpkgs_deps, standalone/drakxconf, share/ftout.xpm,
-	install_gtk.pm, Xconfigurator_consts.pm, share/consolefonts/lat2-sun16,
-	share/po/no.po, resize_fat/boot_sector.pm, share/CardsNames,
-	c/Makefile.PL, share/themes-mdk-Desktop.rc,
-	share/themes/blueHeart-brown_bg1.png, share/logo-mandrake.xpm,
-	share/consolefonts/Cyr_a8x16, standalone/netdrake, standalone/drakgw,
-	share/po/sl.po, standalone/rpmdrake, share/makedev.sh,
-	share/themes/DarkMarble-button3_in_prelight.png, share/themes-blue.rc,
-	install_steps_newt.pm, resize_fat/Makefile.PL, partition_table_empty.pm,
-	my_gtk.pm, share/po/i18n_compssUsers, install2.pm, share/compssList,
-	share/po/fr.po, share/themes/DarkMarble-button3_in.png,
-	standalone/icons/ftin.xpm, share/modparm.lst, raid.pm,
-	standalone/diskdrake, share/po/ko.po,
-	share/template.in/zip.fsdev.kdelnk.in, share/compssUsers.desktop,
-	share/po/ja.po, any.pm, share/isdndb.net,
-	share/template.in/floppy.kdelnk.in, share/step-green-on.xpm,
-	share/step-red-click.xpm, share/po/Makefile, help.pm,
-	share/po/zh_TW.Big5.po, c/sbus.c, genmodparm, share/po/pl.po,
-	share/themes-savane.rc, install_steps_stdio.pm, share/po/th.po,
-	loopback.pm, resize_fat/any.pm, share/po/el.po, install_steps_gtk.pm,
-	Newt/Newt.pm, Xconfigurator.pm, interactive_gtk.pm,
-	standalone/drakxservices, resize_fat/Makefile, fsedit.pm,
-	interactive_stdio.pm, live_install2, resize_fat/directory.pm,
-	share/po/pt.po, install_steps_auto_install.pm, share/po/DrakX.pot,
-	share/themes/mdk-bg.png, share/list.ppc, share/po/ga.po, share/po/et.po,
-	share/keymaps.tar.bz2, partition_table_bsd.pm, c/md5.c, share/help.xpm,
-	share/themes/marble3d-check2.png, ftp.pm, c/md5.h,
-	standalone/adduserdrake, share/themes/marble3d-button2.png,
-	partition_table_raw.pm, share/template.in/zip.kdelnk.in,
-	share/locales.tar.bz2, standalone/icons/fileopen.xpm,
-	share/template.in/kppprc.in, ChangeLog, resize_fat/README, mouse.pm,
-	commands, standalone/XFdrake, share/gconv.tar.bz2, share/po/eo.po,
-	interactive.pm, log.pm, share/themes/DarkMarble-gloom2.png,
-	interactive_newt.pm, share/po/da.po, resize_fat/c_rewritten.pm,
-	bootloader.pm, share/po/af.po: branch to build the firewall install.
-
-2000/11/28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: change upgrade section for keyboard.
-
-	* install_steps_gtk.pm: extended chooseSizeToInstall.
-
-	* install_steps.pm: updated comment.
-
-	* pkgs.pm: fixed misuse of map with values returing list which are indexed
-	afterward.
-
-	* install_any.pm: removed some more logs.
-
-	* keyboard.pm: keep track of unknown keyboard (for upgrade)
-
-	* install_steps_interactive.pm: modified def_mark to 59 (gl hw
-	acceleration level) and upgrade use this level
-	for newbies so.
-	make sure a recommended upgrade get the minimum and a little more (80).
-	choose default size according to a default mark (currently 49).
-
-2000/11/27  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_consts.pm: added isdn Gazel card 10b5 1151
-
-2000/11/27  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (@bad_types): list of the different type of extended
-	partitions
-	(important_types): remove @bad_types from important_types
-
-2000/11/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ru.po: updated Russian file
-
-2000/11/24  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: doc + split
-
-	* netconnect_new.pm: added depmod after having writed modules.conf
-
-	* standalone/mousedrake: splited
-
-2000/11/24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: avoid .la files for selection.
-
-	* install_steps.pm: added missing portmap.
-
-2000/11/23  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet2: progressbar.
-
-2000/11/23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_gtk.pm: updated with
-	structural change of pkgs.
-
-	* install_any.pm: removed some ugly logs.
-	updated with structural change of pkgs.
-
-	* install_steps.pm: added tempory fix for initscripts %post.
-	updated with structural change of pkgs.
-
-	* pkgs.pm: synced versionCompare() with rpmtools-2.1-4mdk.
-	removed ugly log on transaction.
-	added special case to avoid counting kernels space when upgrading
-	as these package are not upgraded (just installed).
-	Memory usage optimization, change structure of storing
-	package informations. lot of fork to make sure of
-	freeing memory by perl (no free on used hashes or arrays
-	usable by other than perl), now upgrade takes as much as
-	install which takes at least 0.5Mb less than before.
-
-2000/11/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: put all tina stuff to weight 0
-
-2000/11/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfig.pm: added more subtil upgrade from /etc/X11/XF86Config* files,
-	keep
-	wacom entries.
-
-	* Xconfigurator.pm: upgrade for XF86Config, take care of resolution and
-	depth wanted.
-
-	* install_steps.pm: always try to get default from /etc/X11/XF86Config
-	removing logs.
-
-	* pkgs.pm: cosmetic changes for upgrade, removing some logs.
-
-	* install_steps_interactive.pm: removed code to ask if take care of
-	/etc/X11/XF86Config* files.
-	added wait message during rebuild of rpm database as it takes some time.
-
-	* Xconfigurator_new.pm: WARNING
-
-2000/11/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-2000/11/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: clean up as today filelist is no more.
-	use parsehdlist from rpmtools-2.1-3mdk or above instead of
-	perl code from DrakX forking to simulate a filelist server.
-	this increase performance by 100 to 150% on selection of
-	packages to upgrade.
-
-	* share/list: added parsehdlist.
-
-	* c/stuff.xs.pm: removed logs.
-
-2000/11/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/Cards+: add radeon
-
-	* install_steps_auto_install.pm (exitInstall): fix message
-
-	* install_steps.pm (afterInstallPackages): moved the
-	writeandclean_ldsoconf here
-
-	* fsedit.pm: add /var/ftp and /var/www in the list of propose mount-points
-
-2000/11/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: add openuniverse to the list of gl apps
-
-2000/11/16  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: corrected isdn_get_{list, info}
-
-2000/11/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/list: include /usr/lib/rpm/macros else rpmlib gets crazy :-)
-
-	* modules.pm: tempory version for current glibc, a lot of module have been
-	removed due to
-	problem of stage1 increase in size when compiled with glibc-2.2 and
-	current
-	modutils.
-
-	* c/Makefile.PL: updated with rpmlib 4.
-
-	* c/stuff.xs.pm: completed something that seems to work almost correctly
-	at the first look
-	with rpmlib 4.
-
-2000/11/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: add netscape-german, thx to florin
-	isdn4k-utils gets same weight as isdn4net, thx to Florin
-
-2000/11/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-	* share/po/sk.po: updated Slovak file
-
-2000/11/15  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: added isdn_get_list and isdn_get_info
-	calls modules::write_conf to fill the modules.conf.
-
-	* Xconfigurator_new.pm: added to fork frontends backends. Not operationnal
-	at all for now.
-
-	* modules.pm: when loading a new module, add an alias for it, even in
-	standalone mode.
-
-2000/11/15  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* c/stuff.xs.pm: updated for rpm 4.
-
-	* pkgs.pm: rpmdepOrder again (for new TAGp)
-
-2000/11/15  Pixel  <pixel@mandrakesoft.com>
-
-	* c/Makefile.PL: add librpmio
-
-	* c/stuff.xs.pm: workaround for kernel-headers not in sync with glibc
-	(dev_t)
-
-2000/11/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: better structure for the ethx-driver.
-	added call to add_alias and write_conf
-
-	* standalone/draknet2: updated
-
-2000/11/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: removed foreach (<... which are eating memory
-	fork install on upgrade for searching trhough filelist, this saves
-	about 20Mb of memory before rpmlib transaction are started so its is
-	more than 2 times faster for upgrading a system, sorry it was
-	effectively
-	a machine two overloaded that makes the upgrade slower.
-	make rpmlib not to check size as DrakX should do it.
-	added special cases for selection of packages according to files, avoid
-	all kde-i18n packages if their locales-$lang is not selected, avoid
-	a -devel package if only one files is updated (typical for fixes on
-	package by moving files around).
-	
-	deactivated rpmdepOrder as it should be done directly in
-	depslist.ordered
-	file.
-	
-	fixed obsoletes which never run correctly, even if almost no package are
-	selected explicitely this way.
-	
-	added log during selection of packages to upgrade to keep a track of
-	what DrakX is doing.
-
-	* modules.pm, network.pm, netconnect.pm, common.pm, modparm.pm,
-	Xconfig.pm, commands.pm, lang.pm, fsedit.pm, detect_devices.pm,
-	printer.pm, Xconfigurator.pm: removed foreach (<... which are eating
-	memory
-
-2000/11/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2000/11/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: Integrate Till's patches for better work with Cups.
-
-2000/11/12  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/mousedrake: fix for bug #1350
-	(mousedrake dies with: Undefined subroutine &mouse::serial_ports_names)
-
-	* pkgs.pm (psUpdateHdlistsDeps): fixed an ugly typo (uses .cz2 for .cz and
-	.cz22 for
-	.cz2) that makes for than one CD install breaks :-(
-
-2000/11/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2000/11/10  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet2: draknet2 : new version of draknet, post-install
-	only, uses only libDrakX backend, beautyfull
-
-	* netconnect_new.pm: completed adsl_conf_backend
-	corrected conf_network_card_backend : return interface and module
-	separately
-	splitted pppconfig.
-
-2000/11/10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/po/fr.po: typo fixing
-
-	* printerdrake.pm: fixed wrong case for managing IP for remove CUPS server
-	updated typo for remote CUPS server configuration dialog
-
-2000/11/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sk.po, share/po/lv.po: updated Latvian and Slovak files
-
-	* share/po/wa.po, share/po/da.po: updated Danish and Walloon files
-
-2000/11/10  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm: initIMPS2 move where it should be (in non-C_RPM dependent
-	section)
-
-2000/11/09  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: added handling for 2 ethernet cards with the same module
-
-2000/11/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/po/fr.po: add some missing translation (mainly printer for CUPS
-	remote config)
-
-	* printer.pm: make sure to restart cups when cupsd.conf is modified.
-
-	* printerdrake.pm: fixed modification of BrowsePoll on a existing file.
-
-2000/11/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: updated
-
-2000/11/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: make sure class discarding do not destroy result
-
-	* pkgs.pm: added new function for selected or installed accessor on pkg
-	make sure package already installed for oem are marked as selected, as
-	some
-	code refer to this state to perform some actions (install_urpmi)
-
-	* install_steps.pm: fixed for urpmi again;
-
-	* printerdrake.pm: add management of BrowsePoll <ip>:<port> in
-	/etc/cups/cupsd.conf
-
-	* printer.pm: add minimal management of /etc/cups/cupsd.conf
-
-2000/11/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/MonitorsDB: Fixed Samsung SyncMaster 3Ne (bug #1136)
-
-2000/11/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/es.po: updated Spanish file
-
-2000/11/07  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: now there are 8 ttyS* available for configuration. Used for
-	internal modem configuration that uses ttyS* > 3
-
-	* netconnect_new.pm: ttyS0 -> ttyS7 available for configuration
-	some doc
-
-2000/11/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed text for card prefered in XFree 3.3 (RIVA128).
-
-	* install_steps_interactive.pm: use of install_any::boot_medium to avoid
-	listing medium used for boot
-
-	* install_any.pm: use of $boot_medium where the boot medium is used
-	(default 1)
-
-2000/11/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/Cards+: fix tseng server for ET4000 W32i, W32p thanks to
-	<sileryti@mail.com>
-
-2000/11/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): in oem, configureX automatic
-	(main): $::oem is now global :-(  (needed in install_steps.pm)
-
-	* install_steps.pm (afterInstallPackages): give medium 'cdrom' to
-	install_urpmi in case of $::oem
-
-2000/11/06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: backend/frontend fork complete
-
-	* any_new.pm: load_thiskind changed to load_thiskind_backend, the wait
-	function is passed by argument
-
-	* network.pm: configureNetwork2 commented.
-
-2000/11/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: created function for examining already installed package on
-	install (oem).
-
-	* install2.pm: add a flag to allow by default formating /
-
-	* install_steps.pm: conditionnal format of / and use already installed
-	packages if any on install.
-
-2000/11/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/MonitorsDB: added Hitachi CM753 contributed by Adam Julius
-	<ajulius@yahoo.com>
-
-2000/11/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/ru.po, share/po/uk.po: updated pot file
-	GRUB/LILO/SILO messages *must* be in ascii only. Changed cyrillic to
-	ascii transliteration for them
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* keyboard.pm, ChangeLog: added the 3 kbd layouts for CZ and SK kbds
-
-2000/11/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (formatPartitions): formatMountPartitions done even in
-	upgrade
-	(main): set $o->{partitioning}{use_existing_root} in oem
-
-	* install_steps.pm (doPartitionDisksAfter): remove the mount_all which is
-	plain dumb
-	(doPartitionDisksAfter): fs::mount_all moved here
-	(doPartitionDisks): use $o->{partitioning}{use_existing_root}
-
-	* install_any.pm (use_root_part): fs::mount_all really removed
-	(use_root_part): fs::mount_all removed
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): don't propose
-	already mounted partitions
-	(installCrypto): nicer layout
-
-2000/11/05  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: changed 'IntelliMouse label' to 'Generic PS2 Wheel Mouse'
-
-2000/11/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/MonitorsDB: added LG StudioWorks520Si contributed by Yves Maniette
-	<yves@maniette.com>
-
-2000/11/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eo.po: updated Esperanto file
-
-2000/10/31  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: continuing forking frontend - backend. adsl ist
-	nearly finished
-
-	* any_new.pm: added this file to fork frontends and backends in any.pm
-
-2000/10/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: heartbeat pixel wonderful un chien vaut mieux que deux
-	tu damsera
-
-2000/10/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po: updated Walloon file
-
-	* share/keyboards.tar.bz2: updated keyboards
-
-2000/10/30  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (load_po): backslash @ in po strings, otherwise the eval fails
-
-2000/10/28  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: new version of draknet. Splited frontends - backends
-
-2000/10/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-2000/10/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: remove the noising rpm output command line when loging
-	installed rpm
-	size (only usefull for live_update and just for conveniance).
-
-	* pkgs.pm: Make sure $meta_class is defined in readCompsUsers (for HTTP
-	hack)
-	before reading a compssUsers file.
-
-	* live_install: add VERSION in list of file that have to be symlinked.
-
-	* common.pm: list_skels returns list of existing directory and writeable.
-
-	* live_install2: Make sure to remove font path in /tmp/drakx before
-	exiting.
-
-2000/10/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/tr.po, share/po/it.po: updated Italian and
-	Turkish files
-
-2000/10/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: fortune-mod gets 10/0/10 on request from egil
-
-2000/10/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pl.po: updated Polish file
-
-2000/10/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ca.po: updated Catalan file
-
-2000/10/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, ChangeLog, diskdrake.pm: added some carriage returns
-	to please jl :)
-
-	* detect_devices.pm (floppies, probeall): add require "modules" as it
-	should be
-
-	* install_interactive.pm (partitionWizardSolutions): add "require
-	resize_fat::main" as it should be
-
-2000/10/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: linuxconf-gui got -1/-1/-1 while gnome-linuxconf has
-	74/0/74
-
-2000/10/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/uk.po, share/po/tr.po, share/po/az.po: updated Azeri, Turkish
-	and Ukrainian files
-
-2000/10/20  fabman
-
-	* share/po/es.po: updated
-
-2000/10/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: ntp to -1/-1/-1
-
-2000/10/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: put all packages requiring kde1-compat to 0 except
-	kisdn-free
-	aumix now gets a high weight (79) because it's required to save the
-	mixer
-	settings at shutdown
-
-2000/10/19  Pixel  <pixel@mandrakesoft.com>
-
-	* share/locales.tar.bz2: fix symlink zh_CN.GB2312 (was zh_CN.G23212)
-
-2000/10/19  tlb
-
-	* share/po/da.po: 100%, Troels Liebe Bentsen.
-
-2000/10/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: Added AZeri file
-
-	* share/po/no.po: updated Norwegian file
-
-2000/10/17  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm, netconnect.pm, netconnect_consts.pm: removed unused
-	code in ineractive_gtk
-	added some isdn card in pcitable
-	corrected typos, and made ISA isdn work
-
-2000/10/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/lv.po: updated Latvian file
-
-2000/10/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-	* standalone/keyboarddrake, keyboard.pm, ChangeLog: corrected BackSpace
-	setting
-
-2000/10/16  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (cdroms): fix the setting of scdX for ide burners
-
-	* share/compssList: sympa is -1 except for server
-
-	* keyboard.pm (write): small pixelization (neater now)
-
-	* install_steps.pm (installPackages): don't run ldconfig in g_auto_install
-
-2000/10/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-2000/10/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: small fix for Swedish locale
-
-	* share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/fr.po,
-	share/po/wa.po, share/po/de.po: updated Bulgarian file
-
-2000/10/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* partition_table_empty.pm: empty partition table as assumed only if the
-	MBR is really composed of only null chars.
-
-2000/10/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: added viavoicemenu
-
-2000/10/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (ask_mntpoint_s): dqs
-
-2000/10/11  Pixel  <pixel@mandrakesoft.com>
-
-	* .cvsignore: ignore flog files
-
-	* install2.pm (main): test
-
-	* ChangeLog: qsdqsd
-
-	* install_steps_interactive.pm: * (selectKeyboard): set default
-	$o->{langs} to $o->{lang}
-
-2000/10/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, ChangeLog: make only one call to urpmi in order to
-	install all the needed rpm's
-
-2000/10/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po, share/po/es.po: updated Norwegian file
-
-	* share/po/pl.po: updated Polish file
-
-	* share/po/zh_CN.GB2312.po, share/po/zh_TW.Big5.po: updated Chinese file
-
-2000/10/10  tlb
-
-	* share/po/da.po: 99%.
-
-2000-10-10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: make only one call to urpmi in order
-	to install all the needed rpm's
-
-2000-10-10  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-10  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: increase $::VERSION
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: update after Dam's new messages in netconnect
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (kdeicons_postinstall): remove the handling of
-	doc desktop icons. see dadou
-
-2000-10-09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers: new list (with icons)
-
-	* share/list: add icons for compssUsers
-
-2000-10-09  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: added wait message
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* share/themes-*.rc: change the fg[INSENSITIVE] entry
-
-2000-10-09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: added tuxracer in OpenGL games to install if an
-	accelerated card has been found.
-
-2000-10-09  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (main): asking connection after writing start/stop scripts.
-	(adsl_conf): if during install, don't use chkconfig, make the
-	links directly for the adsl init script.
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): UserView in kdmrc is
-	now true by default. So put false if security >= 3 instead of
-	removing it.
-
-2000-10-09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: default speed of modem set to 115200.
-
-	* fs.pm: fixed format of RAID partition.
-
-	* install_interactive.pm: take into account RAID partitions for
-	searching / partition.
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (selectKeyboard): don't assume $o->{langs} is set
-	(selectLanguage): don't set $o->{langs} (so that you can go back
-	and it works)
-
-	* common.pm (round_up, round_down): ensure number is an integer
-
-	* install_steps_interactive.pm (chooseGroups): take into account
-	the min_level to compute the size
-
-2000-10-08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): move the
-	computing of max_size before calling chooseGroups (not the one for
-	desktop meta_class)
-	(chooseGroups): compute the size of Miscellaneous
-
-2000-10-07  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssList: don't install locales-* even in 'all' install
-	(those files are usefull if RPM_INSTALL_LANG doesn't include that
-	lang)	
-
-2000-10-07  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-07  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (install): log the gonna be installed packages (-> be
-	able to track not installed packages that should have been
-	installed)	
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (pppConfig): the domain used for kppp is copied in resolv.conf
-	(intro): connection detection improved : now use "ifconfig | grep interface"
-	(pppConfig): corrected cnx_up/down
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): don't fail if
-	kdeglobals file is not there	
-
-	* share/compssUsers.desktop: fix icons
-
-	* detect_devices.pm (cdroms): fix for scsi cdrom drives
-
-	* pci_probing/pcitable: put cs46xx instead of snd-card-cs461x
-	(dixit jeff)
-
-	* diskdrake.pm (Resize): comment ext2&reiserfs resizing for the
-	moment	
-
-2000-10-06  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* Xconfigurator.pm (write_XF86Config): added mode of wacom devices
-
-2000-10-06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (ask_connect_now): connection is now tested.
-
-2000-10-06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_gtk.pm: updated
-	license.
-
-	* Xconfigurator.pm: removed Matrox G200/G400 3D acceleration by
-	DRI, use only Mesa with Utah GLX, fixed autologin for avoiding
-	drakres and no wm available, moved Riva128 card from experimental
-	to stable, fixed presentations of text.
-
-	* pci_probing/pcitable: fixed Cirrus Logic sound card.
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: fixed bad call to hasUsb...
-
-	* share/Cards+: fixed wrong use of SiS card with 4.0.1, only keep
-	530, 620 and 6326 with XFree 4.0.1.
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  Pixel  <pixel@mandrakesoft.com>
-
-	* share/list: remove /usr/X11R6/lib/X11/Cards, not needed anymore	
-
-	* install_steps.pm (afterInstallPackages): put the Charset in
-	kdeglobals, otherwise kde uses charset iso8859-1 :(
-
-	* lang.pm (charset): created
-
-	* common.pm (update_userkderc): fix it, change the argument
-	passing	
-
-2000-10-05  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssList: raise kde-i18n-*, should be installed whenever
-	kdebase is installed
-
-	* pci_probing/pcitable: integrate patch from viet (concerns
-	sym53c8xx cards)
-
-	* share/compssUsers: use "documentation" as the database icon
-
-	* install_steps_interactive.pm (chooseGroups): fix to accept icons
-	not in the format "*_section.xpm"
-
-	* install2.pm (miscellaneous): put yes/no in sysconfig/usb entries	
-
-2000-10-05  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (adsl_conf): updated pppoe conf.
-	(main): added $netc->{minus_one} to avoid to count dhcp configured
-	eth when asking to share the connection.
-	(adsl-pppoe): improvement. Should work now.
-	(miscellaneous): corrected chmod 755 to 744 for connections scripts
-
-	* netconnect.pm (main): network is stopped then started, instead
-	of restarted.
-
-2000-10-05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* live_install: added icons (this fixes the yellow on white
-	tooltips problem).
-
-	* install_any.pm: added ghostscript-utils in the list of packages
-	to copy when changing CD.
-
-	* printerdrake.pm: install ghostscript-utils if a lexmark printer
-	is selected on cups.
-
-2000-10-05  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (loadO): look for auto_inst.cfg in /, not in
-	/Mandrake/base	
-
-2000-10-05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* netconnect.pm: fixed syntax error.
-
-	* share/po/i18n_compssUsers: simplified version and fixed
-	dependancies to pkgs.pm (for building drakxtools).
-
-2000-10-04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_gtk.pm: removed 80 pixel on height for live upgrade.
-
-	* install_steps.pm: do not set keyboard when live upgrade after
-	setting the language.
-
-	* install_steps_gtk.pm: fixed the trying to start a X server on
-	live.
-
-2000-10-04  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/i18n_compssUsers: fake module ``c'' so that no need to
-	build DrakX to use i18n_compssUsers
-
-	* install_steps_interactive.pm (selectLanguage): update license
-
-	* install_steps_gtk.pm (installPackages): add second license for
-	shitty soft (commercial one)
-
-2000-10-04  dam's  <damien@mandrakesoft.com>
-
-	* draknet (netconnect.pm and network.pm): various translations
-	corrected, network is restarted, buttons connect/disconnect
-	debugged. 
-
-2000-10-04  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-04  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (main): kill prefdm instead of autologin
-
-	* install_any.pm (find_root_parts): don't use
-	suggest_mount_points, it couldn't do what we wanted	
-	(guess_mount_point): created, contains the common stuff between
-	suggest_mount_points and find_root_parts
-
-2000-10-04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: fix some failing/untranslated i18n messages
-
-	* share/po/fr.po: write translations according to drakgw
-	
-2000-10-04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: removed bad card for 3D Rage Pro.
-
-	* install_any.pm: removed Aurora for SiS card, add more case for
-	detecting right cdrom for live upgrade, fixed wrong list of
-	packages for laptops.
-
-	* c/stuff.xs.pm: added time interval of 200ms between update of
-	progression bar of install, make sure the last step is seen.
-
-2000-10-04  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (when_load): stricter regexp for $type is scsi or not
-	(so that scsi_mod with is scsi_raw doesn't get an alias
-	scsi_hostadapter)	
-
-	* detect_devices.pm (isLS120Drive): extend the regexp to include
-	"Caleb Technology - 144MB FDD UHD Floppy"
-
-	* detect_devices.pm (burners, IDEburners): reworked, renamed, now
-	works!	
-	* c/stuff.xs.pm (isBurner): created
-
-	* modules.pm (load_ide): make sure ide-cd is loaded!
-
-	* install_steps_interactive.pm (chooseGroups): the label and help
-	are now translated (at least will be), so use the translations
-
-2000-10-03  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile (DrakX.pot): added the to-be-translated from
-	compssUsers
-	* share/po/i18n_compssUsers: read the compssUsers's and output the
-	to-be-translated in po format
-
-	* log.pm (l): log to STDERR instead of STDOUT
-
-	* install_any.pm (loadO): use first floppy drive available (won't
-	help much though, as stage1 doesn't follow this...)
-
-2000-10-03  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-03  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): don't propose autologin in
-	security > 3
-
-	* common.pm (availableRamMB): HACK HACK if i810 and memsize,
-	returns 127
-
-	* bootloader.pm (suggest): don't use grub if more than 800MB
-
-2000-10-04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/validate.pl: create this tool
-	
-	* share/po/fr.po: fix many typos
-
-	* share/po/fr.po: make compssUsers translation
-
-2000-10-03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: changed resolution allocation.
-
-	* fs.pm: removed no more used log.
-
-	* install2.pm: add exit button if live upgrade.
-
-	* install_any.pm: increased minimal available size to 65Mb.
-
-	* install_steps.pm, standalone/printerdrake: fixed cups to CUPS
-	for mode.
-
-	* printerdrake.pm: fixed not_edit for lpr mode of printerdrake.
-
-	* share/Cards+: fixed Savage2000 entry.
-
-2000-10-03  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated bad card with Rage Mobility card.
-
-	* live_install: added test of root user, abort if not root.
-
-2000-10-03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fixed bug #518 and fixed other misc errors
-
-2000-10-03  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-02  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm (Resize): fix to make ext2resizing work a little
-	better	
-
-	* install_steps.pm: fixed installation of urpmi configuration.
-
-	* detect_devices.pm: updated comment about UltraDMA66/100
-	management.
-
-	* modules.pm: updated comment about UltraDMA66/100 management.
-
-	* diskdrake.pm: adding a cylinder for the minimum of the resize
-	and if there is nothing to do for resize, simply return.
-
-	* install_any.pm: added missing require pkgs.
-
-2000-10-02  Pixel  <pixel@mandrakesoft.com>
-
-	* many files: remove many lnx4win special cases which are not
-	needed anymore        
-	
-	* any.pm (addUsers): grpuser output goes to Mr Dave
-
-	* bootloader.pm (install_lilo): change the default color of menu
-
-	* install_steps_interactive.pm (choosePackages): add 300MB choice
-	in desktop
-
-	* mouse.pm (fullnames): fix i18n fix
-
-	* install_steps.pm (miscellaneous): don't add ide2=0x... for
-	ultra66 (otherwise chmouel is not happy, so is hdc being hde)
-	
-	* Xconfigurator.pm (main): add handling of icewm logout
-
-	* c/stuff.xs.pm: changed the stepping of "Progressing installing package"
-
-2000-10-02  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (main): infos are written only when needed.
-	* netconnect.pm (intro): connection checking now works.
-	
-2000-10-02  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* pci_probing/pcitable: s|snd-card-via686a|via82cxxx_audio|; like
-	jeff request.
-
-2000-09-30  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-30  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: a LOT of bugs fixed. draknet is now completely
-	brok^H^H^H^Hfrozen.
-
-2000-09-29  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-29  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (adsl_conf): dhcp should better work.
-
-	* network.pm (configureNetwork): remove connection script if a
-	gateway is given.
-
-	* common.pm (setVarsInShMode): created. chmod the file with
-	permissions passed in argument.
-
-2000-09-29  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm (load): fixed when standalone, use modprobe.
-
-	* pkgs.pm: added preference for wu-ftpd.
-
-	* detect_devices.pm: added code to proble USB printer.
-
-	* printer.pm: fixed missing PRINTER=yes on CUPS configuration for
-	USB printer.
-
-	* install_steps.pm: removed possibilty to add an user in urpmi
-	group (jloup).
-
-	* install_steps_interactive.pm: log if CD not ejectable.
-
-2000-09-29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: sync with latest packages
-
-	* install_steps_interactive.pm (selectLanguage($)): s/42/43/ in
-	  MandrakeSoft physical address 
-
-2000-09-29  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-29  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (intro): detection of internet
-	configuration/connexion state.
-	
-	* network.pm (write_resolv_conf): better "ppp temp nameserver" in resolv.conf
-
-2000-09-28  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_thiskind): add read_already_loaded cuz of
-	pcmcia	
-
-2000-09-28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: add nasty DrakSync and DrakProfile with 50 0 50
-
-2000-09-28  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): the minimum is 25
-	in beginner, not 10
-
-	* pkgs.pm (readCompssUsers): fix reading description
-
-	* install_steps.pm (afterInstallPackages): remove the code to
-	handle RPM-GPG-KEYS
-
-2000-09-28  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_list_with_helpW): no more theme
-	parsing, no more draknet.rc
-
-	* netconnect.pm (read_net_conf): no adsl tree anymore.
-
-	* netconnect.pm: drakgw called if enough card are installed.
-
-	* netconnect.pm: minor bugs correction.
-
-2000-09-28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Makefile.config: added livedrake for drakxtools.
-	* diskdrake.pm: use corrected partition size when resizing a dos
-	partition (like the others).
-	* install_any.pm: no more pnm2ppa packages and others in package
-	to copy when changing CD.
-	* live_install: exec live_install2 instead.
-	* live_install2: contains post live upgrade stuff now.
-	* printerdrake.pm: protect set_help() usage by if $::isInstall,
-	removed reference to package pnm2ppa and others.
-	* standalone/livedrake: initial release for drakxtools.
-
-2000-09-28  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm (partitionWizardSolutions): fix the limit
-	cases for lnx4win	
-
-	* share/po/Makefile ($(PMSCFILES)): fix the DrakX.pot generation	
-
-2000-09-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): set $size2install
-	to $availableC in desktop install, as it should be
-
-	* install2.pm (choosePackages): remove the code for removing kdesu
-	in high security...
-
-	* install_steps_interactive.pm (createBootdisk): format more
-	nicely the text
-
-	* install_steps_gtk.pm (installPackages): add 10 seconds to have a
-	better estimation
-
-	* install_steps_interactive.pm (chooseGroups): now returns a boolean
-	(choosePackages): use chooseGroups return value to redo
-	choosePackages	
-
-	* install_steps_gtk.pm (selectMouse): if mouse type is none, then
-	don't test!
-
-	* Xconfigurator.pm (monitorConfiguration): rename Unlisted to Custom
-
-	* various: replace all Rescue by Update
-
-	* pkgs.pm (readCompssUsers): read description for groups
-	
-	* install_steps_interactive.pm (chooseGroups): add description for
-	groups	
-
-2000-09-27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers.desktop: added description
-
-	* share/compssUsers: added description
-
-	* share/compssUsers.desktop: added icon support, reordered,
-	  renamed
-
-	* share/compssUsers: reordered, renamed
-
-2000-09-27  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectLanguage): intregrate
-	license again
-
-	* pkgs.pm (readCompssUsers): reads compssUsers.meta_class
-
-	* diskdrake.pm (Create): replace ``ne "i386"'' by ``!~ /i.86/''
-	(as should be)
-
-	* install_steps_gtk.pm (selectInstallClass1): if @$l (list of
-	install classes) contains only one element, call
-	install_steps_interactive::selectInstallClass1	
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fix for
-	"no partitions selected to format"
-
-	* my_gtk.pm (_create_window): alt-e now *toggles* expert/newbie	
-
-2000-09-27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: more for gnupg, -11 for sucking things,
-          changed compss-groups to be less than 70.
-
-	* share/compssUsers: modified compssUsers with Warly, added
-          compssUsers.desktop, simplified for KD (now uses Graphical
-	  Desktop/KDE instead of listing all relevant packages)
-
-2000-09-27  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (get_info_adsl_providers, read_adsl_providers):
-	Created. adsl provider tree. 
-	(set_net_conf): better informations storing.
-
-	* my_gtk.pm (new): windows are always centered if standalone.
-
-2000-09-27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added option "sw_cursor" for S3 Trio3D. fixed
-	3D hw acceleration for i815 (VideoRam). prefer XF3 for all
-	NeoMagic cards.
-	* install_gtk.pm: re-enabled themes on live upgrade but without
-	modifying background image.
-	* install_steps_gtk.pm: fixed missing help.
-	* live_install: lot of fixes to enable DrakX font, keep upgraded
-	system clean (libperl.so which allows graphical login).
-	* pkgs.pm: added function allowedToUpgrade to filter kernel
-	package.
-
-2000-09-27  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (configureX): if `clicked' don't go
-	to auto mode
-
-	* Xconfigurator.pm (monitorConfiguration): fix the translated
-	'Generic' which is not so (and must not be so) anymore
-
-2000-09-26  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: remove all Unskip code
-
-	* my_gtk.pm (_create_window): add shortcut alt-e to switch to
-	expert
-
-	* Xconfigurator.pm (resolutionsConfiguration): fix for setting
-	legal resolution
-
-	* install_steps_interactive.pm (selectLanguage): use formatAlaTeX
-	on the license
-
-2000-09-26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* fs.pm: added mounting of swap partition when mounting them
-	all (this can help :-) 
-	* pkgs.pm: fixed correction size code to make (really) a true
-	bijection between corrected and rpm size.
-
-2000-09-26  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectLanguage): integrate the
-	license (temporary one)
-
-	* modules.pm (write_conf): fix the /etc/modules generation
-
-	* interactive_gtk.pm (ask_many_from_listW): if more than 5 entries
-	in icon format, use scrollbar. In non-icon format, use scrollbar
-	for more than 11 entries.
-
-	* commands.pm (bug): add ddcxinfos
-
-	* pci_probing/pcitable: replace tulip by de4x5 for 2104x cards	
-
-2000-09-26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added more 3D Rage Pro card for 3D
-	acceleration with Utah-GLX (Rage Mobility, Rage XC/XL),
-	modified identification for checking acceleration.
-	* install_any.pm: added automatic installation (up 60) for
-	OpenGL games if a graphic card MAY BE accelerated.
-	* live_install: fixed perl idioms in pure shell script and added
-	packdrake symlink if not already installed.
-	* share/compssList: changed level to -1 for all needing 3D hw
-	acceleration packages.
-
-2000-09-26  dam's  <damien@mandrakesoft.com>
-
-	* network.pm (write_resolv_conf): write temp dns line to be used
-	with new initscripts package. Use to set dns live.
-
-2000-09-26  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-26  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (read): catch exception if fullname2mouse fails (eg:
-	old FULLNAME format)
-
-2000-09-25  Pixel  <pixel@mandrakesoft.com>
-
-	* share/MonitorsDB: merge with latest redhat MonitorsDB
-
-	* pci_probing/pcitable: major merge with latest redhat pcitable
-
-	* share/Cards+: added "Intel 815", renamed "Rage 128 (generic)" to
-	"Rage 128", added "Rage 128 Mobility"
-
-	* install_any.pm (getAvailableSpace): keep 10% of free space on
-	big partitions
-
-	* Xconfigurator.pm (readMonitorsDB): don't translate Generic
-	(otherwise, only a part is translated, see MonitorsDB for the
-	non-translated part)
-
-	* interactive.pm (ask_many_from_list): fix sorting
-
-	* install_gtk.pm (test_mouse): smaller box to fit in 640x480
-
-	* install_steps.pm (afterInstallPackages, beforeInstallPackages):
-	RPM-GPG-KEYS is copied before installing packages
-
-	* pkgs.pm (readCompssUsers): handle icons in compssUsers
-
-	* common.pm (truncate_list): ensure the list is not too big
-
-	* install_steps_gtk.pm (choosePackagesTree): restrict the list to
-	20 elements if it is too big (use truncate_list)
-
-2000-09-25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: add Video mode for entry.
-	* fs.pm: updated for live upgrade.
-	* install2.pm: dropped unuseful steps filtering.
-	* install_any.pm: fixed wrong Device3Dfx package name and clean
-	postinstall rpms directory on upgrade before filling it.
-	* install_gtk.pm: removed window restrictions of live upgrade.
-	* install_steps.pm: fixed initrd symlink following in case of
-	upgrade.
-	* install_steps_gtk.pm, install_steps_interactive.pm: keep always
-	upgrade on live upgrade.
-	* modules.pm: may fixed pcmcia lost driver (typically on network).
-	* pkgs.pm: fixed (uggly?) usage of floating perl data on perl
-	script :-)
-	* printer.pm: back to "Generic PostScript" for default printer (jloup).
-	* printerdrake.pm: make sure an expert can choose among available
-	devices.
-
-2000-09-25  dam's  <damien@mandrakesoft.com>
-
-	* network.pm (write_resolv_conf): write '# ppp temp entry adsl' in
-	/etc/resolv.conf if needed.
-
-	* netconnect.pm : adsl connection does'nt need any dns anymore.
-
-	* netconnect.pm (read_net_conf): created. draknet now stores and
-	reload the config.
-	
-	* netconnect.pm (main): if the user is french and uses french
-	keyboard, don't ask his country.
-
-2000-09-25  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: added 8139too
-
-	* share/Cards+: GeForce2 DDR is handled by driver "nv"
-
-	* Xconfigurator.pm (main): in killall X for Xdrakres, also killall
-	kdm/xdm/gdm/autologin :)
-
-2000-09-25  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-25  dam's  <damien@mandrakesoft.com>
-
-	* network.pm (configureNetwork): Warn user if he already
-	configured the interface.
-
-2000-09-24  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (mergein_conf): created. call read_conf, fills
-	%modules::conf and set $modules::scsi
-
-2000-09-24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw (fatal_quit($)): add log of reason of fatal_quit
-
-2000-09-24  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-24  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm (bug): use first floppy drive instead of fd0 hard
-	coded (nice for LS120's)
-
-	* install_steps_gtk.pm (selectMouse): if device changed, do the
-	test	
-	* standalone/mousedrake: fix for serial mice
-	* install_steps_interactive.pm (selectMouse): fix for serial mice
-
-2000-09-23  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (conf_network_card): now displays the modules of
-	detected ethernet cards.
-
-2000-09-22  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (main): calls drakegw.
-	* netconnect.pm (get_net_device): fixed
-
-2000-09-22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw:
-	  - added logs
-	  - added verbose mode
-          - fixed wrong stopping of named in other languages than english
-
-	* netconnect.pm (get_net_device): try to fix it..
-
-2000-09-22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard,
-	choosePartitionsToFormat, chooseCD, installCrypto): use new ask_many_from_list
-	(): 
-
-	* interactive.pm (ask_many_from_list): now only ask_many_from_list
-	exists, obsoleting ask_many_from_list_ref and
-	ask_many_from_list_with_help. More flexible and nicer
-	* interactive_newt.pm (ask_many_from_listW): adapted to new
-	calling type
-	* interactive_gtk.pm (ask_many_from_listW): adapted to new calling
-	type, handle 'shadow' and 'icon2f'
-
-2000-09-22  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): if /lnx4win/i in VERSION, set $o->{lnx4win}
-
-	* Xconfigurator.pm (cardConfiguration): fix setting 4MB of meg for
-	i810	
-	(testFinalConfig): i810 is a verybad_card, aka can't test anything
-	on it :-(
-	(main): fork to background and stay there while waiting for the WM
-	to exit
-	(testFinalConfig): update the backgroung image path
-
-	* interactive_gtk.pm (exit): flush X before leaving (otherwise the
-	mousecursor is not restored)
-
-	* run_program.pm (rooted): don't redirect the stdout and stderr to
-	ddebug.log if not $::isInstall
-
-	* log.pm (l): log on stdout/stderr if !isInstall and !isStandalone
-
-	* modules.pm (load_raw): redirect stderr to tty5
-
-	* install2.pm (main): set variable $::isInstall
-
-2000-09-22  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: now includes information from netconnect to
-	ignore the interface used for Internet connection
-
-2000-09-22  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm (selectInstallClass1): pixel's typo.
-
-	* netconnect.pm (get_net_device): added get_net_device to know
-	which interface has been used to configure the internet connection.
-	(conf_network_card): ask to restart network if dhcp too.
-	(main): enable dialing when modem.
-
-	* network.pm (configureNetworkIntf): changed label to warn people
-	about already configured eth cards.
-
-2000-09-22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_gtk.pm: added Desktop themes.
-	* share/themes-mdk-Desktop.rc, share/themes/mdk-Desktop-bg.png:
-	initial release.
-	* install2.pm: moved back to all steps for live upgrade.
-	* install_gtk.pm: select right logo if desktop.
-	* install_steps_interactive, install_steps_gtk.pm: avoid asking if
-	upgrade for a live upgrade.
-
-2000-09-22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: add some call to log_sizes to log the
-	installed size
-
-	* install_steps_gtk.pm (installPackages): beep before changeMedium		
-
-2000-09-21  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf): try to call the f translation
-	function on the default value with the index
-
-	* install_steps.pm (afterInstallPackages): make the gpg code work,
-	changed the call to 
-	"gpg --fast-import --homedir /etc/rpm /root/tmp/RPM-GPG-KEYS"
-
-	* detect_devices.pm: cleanup and removed unused code
-
-2000-09-21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* detect_devices.pm (getNet()): really remove plip in standalone
-
-2000-09-21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm, netconnect.pm: changed NETWORKING reference
-	from false to no.
-	* printer.pm: changed timeout from 30 to 60.
-	* printerdrake.pm: added wait message when waiting for cups to
-	start.
-	* pci_probing/pcitable: added erwan VIA Rhine board.
-	* network.pm: added DHCP_HOSTNAME reference.
-
-2000-09-21  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-21  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/keyboarddrake: fix for XF4
-
-	* Xconfigurator.pm (write_XF86Config): comment the omit
-	xfree86-dga	
-
-	* install_steps.pm (afterInstallPackages): configure GPG public
-	keyring with mandrake key	
-
-	* standalone/mousedrake: updated/fixed for new mouse handling	
-
-	* install2.pm (main): update for handling oem installs
-
-	* many files: relGetFile cleanup, updated calls to getFile and
-	getAndSaveFile accordingly
-
-	* Xconfigurator.pm (testFinalConfig): new XFdrake-image-test.jpg
-
-	* detect_devices.pm (@netdevices): plip removed in standalone,
-	otherwise plip is always there (because of kmod)
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): replace
-	the die "cancel" by die "already displayed", so that no error is
-	displayed.
-
-	* pci_probing/pcitable: replace some rtl8139 by 8139too, added
-	cards DELTA8139 and ADDTRON8139 (for jeff)
-
-	* Xconfigurator.pm (show_info): also show the colordepth and
-	resolution. don't show server if none, show XF4 driver if there's
-	one.	
-	(main): change the "Forget the changes" to "Keep the changes?"
-	with displaying the current configuration.
-
-2000-09-21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printer.pm: changed "PostScript" ppd default description to "Raw
-	queue (no filtering)", asked by Till.
-	* Xconfigurator.pm: add log of what user select for 3D hw
-	acceleration.
-	* share/compssList: changed XFree86-glide-module to -2 because the
-	level is the same for XFree86-Glide* which may have multiple
-	different version installed due to dependancies of the first one.
-
-2000-09-21  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (conf_network_card): added check when dhcp. Cable connection
-	should now work.
-
-2000-09-21  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (exitInstall): call $o->exit if
-	"Some steps are not completed"
-
-2000-09-20  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (install_loadlin_config_sys,
-	install_loadlin_desktop): extracted from install_loadlin, do not
-	call them anymore (remove it?)
-	(suggest): put grub in lnx4win install
-
-	* common.pm (availableRamMB): fixed (round to a multiple of 4)	
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (get_info_isdn_providers & read_isdn_providers):
-	read file in /usr/share and $prefix/usr/share 
-	(isdn_write_config): corrected file to be sh compliant.
-	(isdn_write_config): added default route settings for isdn.
-
-2000-09-20  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-20  Pixel  <pixel@mandrakesoft.com>
-
-	* pci_probing/pcitable: replace es1371 by snd-card-ens1371
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): for urpmi, added `--best-output' and suspend/resume 
-
-2000-09-20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/printerdrake: for urpmi, added `--best-output' and suspend/resume 
-
-	* standalone/XFdrake: for urpmi, added `--best-output' and suspend/resume 
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: used new package install function.
-
-2000-09-20  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (isFloppyOrHD): detects wether a device is a
-	floppy or not based on its size (for scsi floppy)
-
-	* Xconfigurator.pm (testFinalConfig): check if "server" OR
-	"driver" field is set (otherwise XF4 only card won't pass)
-
-	* bootloader.pm (suggest): fix for ``installing the last cooker
-	from kenobi:/I on an smp machine i don't get anymore an entry for
-	linux-up'' (c chmouel)
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (read_isdn_providers): corrected typo ($_ -> $_[0])
-
-2000-09-20  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (get_pcmcia_devices): fix (especially, now ethernet
-	should be detected)
-
-	* lang.pm (get_langs): created, gives rpm install langs
-	* install_any.pm (setPackages): give langs::get_langs() to
-	readCompssList	
-	* pkgs.pm (readCompssList): don't use RPM_INSTALL_LANG, use given
-	$langs instead. This fixes the RPM_INSTALL_LANG=all install.
-
-2000-09-19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* netconnect.pm: make dhcp-client, pump and such not translatable.
-	Those are program names and should therefore not be translated,
-	that only confuses translators
-
-2000-09-19  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): corrected @users definition and
-	passwd cat.
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* many files: changed some access to get_root to get_root_	
-	
-	* install_steps_interactive.pm (choosePackages): added code for
-	desktop meta_class install type
-
-	* install_steps_gtk.pm (selectMouse): cleanup, give parameter
-	emulate3buttons to setMouseLive
-	* c/stuff.xs.pm (setMouseLive): add argument emulate3buttons
-
-2000-09-19  Guillaume Cottenceau <gc@mandrakesoft.com>
-
-	* interactive*.pm: changed `suspend' and `resume' to behave as expected,
-	added `enter_console' and `leave_console'
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (miscellaneous): replaced LITTLE_FRIED_OIGNONS by
-	META_CLASS
-
-	* Xconfigurator.pm (cardConfiguration): when ddcxinfos gives false
-	result (not enough VideoRam), also remove the found resolutions
-	* Xconfigurator.pm (main): remove the automatic searching of
-	resolutions	
-	* Xconfigurator.pm (resolutionsConfiguration): cleanup, remove the
-	automatic searching of resolutions.
-
-	* mouse.pm (fullnames): changed the `_' in `[' before Other
-	(nicer, uh?)
-
-	* install2.pm (selectMouse): changed clicked to !first_time
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (testFinalConfig): remove the bloody prototype
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-18  Dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator (autologin): do it eve, if newbie. Autologin is
-	now in separated function.
-	
-2000-09-18  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (testFinalConfig): don't skip the test in auto
-	if called via "Test again"
-	* Xconfigurator.pm (resolutionsConfiguration): ensure all depth
-	are bounded
-
-	* bootloader.pm (suggest): don't put "linux-nonfb" if "linux" is
-	classic and no-fb
-
-	* fsedit.pm (check_mntpoint): add a check for /etc /lib... which
-	must not be mount points. Also check that /home, /tmp and /usr are
-	on trueFS
-
-	* interactive.pm (ask_from_entries_ref): add bounding of "val" in
-	case of type "range". die if min > max.
-
-2000-09-18  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-18  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): nicer
-	partition/device display
-
-	* partition_table_raw.pm (zero_MBR): add on the fly require of the
-	good partition_table_$type
-
-	* detect_devices.pm (cdroms): fix (yet again) the scd$nb device
-	assignment to ide burners
-
-	* install_steps.pm (afterInstallPackages): comment out a part of
-	the icons mess messing
-
-	* Xconfigurator.pm (cardConfiguration): move Unlisted to
-	Other/Unlisted
-	* share/CardsNames: updated (for Voodoo5)
-
-	* install_steps_gtk.pm (selectMouse): fix the test to know wether
-	the guy has changed the mouse type (to know wether to test the
-	mouse or not)
-
-	* install_steps_interactive.pm (selectLanguage): add the license
-	
-	* install_steps_interactive.pm (choosePackages): have the
-	"Recommended" size be the default 
-	(in the choice Minimum/Recommanded/Complete)
-	
-	* diskdrake.pm (Type): fix a typo
-
-	* install_steps.pm (doPartitionDisksAfter): mark partition as
-	mounted	
-
-2000-09-17  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-17  Pixel  <pixel@mandrakesoft.com>
-
-	* install/pcmcia_config.patch: cleaned
-	
-	* diskdrake.pm (Create, Type): have type field not_editable
-
-	* tools/make_mdkinst_stage2: use TMPDIR if available
-
-2000-09-16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): move
-	the setting of toFormat before asking for bad blocks, seems to fix
-	things?? weird :-/
-
-	* network.pm (miscellaneousNetwork): fix the setting of focus on
-	error (tx2Thomas Poindessous :)	
-
-	* install_steps_interactive.pm (configurePrinter): changed
-	"Cancel" to "None" (for Thomas Poindessous :)
-
-	* printer.pm (poll_ppd_base): max polling time raised from 10s to
-	30s (for Till)	
-
-	* install_steps.pm (ask_mntpoint_s): don't force partition type to
-	be ext2 (at least if it's a known fs) (for Warly)
-
-2000-09-15  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (set_help): save the help message displayed
-	in $o->{current_help}
-	* install_gtk.pm (create_big_help): display $o->{current_help}
-
-	* mouse.pm: reworked quite a lot. Now sorts/categorize nicely the mice.	
-	* install_steps_interactive.pm (selectMouse): adapted for reworked mouse.pm
-	* install2.pm (selectMouse): adapted for mouse::read now returning
-	an hash ref
-
-	* detect_devices.pm (hasMousePS2): remove hasMouseMacUSB, do it in
-	one function (now takes the device in the parameter)
-
-	* interactive.pm (ask_from_treelistf): added (just like
-	ask_from_listf, but with a tree)
-
-	* Xconfigurator.pm: the reference is now nbuttons to
-	know wether to put Emulate3Buttons or ZAxisMapping.
-	* Xconfigurator.pm (cardConfiguration): install Glide_V3-DRI on
-	Banshee too.
-
-	* Xconfig.pm: guess nbuttons based on Emulate3Buttons and
-	ZAxisMapping.
-
-	* common.pm (availableRamMB): replace availableRam, now use the
-	size of /proc/kcore (what else to find the real ramsize?)
-
-	* common.pm (cat__): created
-
-	* install2.pm (main): add field meta_class in $o. Can be
-	'desktop', in case option desktop is given, or if /desktop/i is
-	found in /VERSION
-
-	* install_steps.pm (miscellaneous): for lnx4win, always have
-	'mem=' (so that the initrd is visible by both windows
-
-	* install2.pm (main): add option "desktop"
-
-	* install_any.pm (generate_ks_cfg): fix for new(?) $o->{intf} format
-
-	* install_interactive.pm (partitionWizardSolutions): 
-	use only TrueFS for existing_part
-	(partitionWizard): have only "loopback" for lnx4win
-
-	* pci_probing/pcitable: associate Voodoo5 with Voodoo5
-
-	* share/Cards+: add Voodoo5
-
-	* bootloader.pm (suggest): add entry linux-nonfb (called linux-up
-	for smp)
-
-2000-09-14  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm, mouse.pm: moved probing serial port before to
-	detect a wacom tablet (even if a PS/2 or USB mouse is found).
-	* help.pm: corrected reference to previous version of LM (jloup).
-	* install2.pm: removed duplicate code for getting network
-	configuration, using network module.
-	* netconnect.pm: intf is now a hash and no more an array.
-	* network.pm: changed nature of intf to hash from array, reworked
-	write_resolv_conf function to keep old code in comment but only
-	when not used anymore (to make it easier by hand modification).
-	* printer.pm: SOCKET accessible to expert only (jloup).
-	* printerdrake.pm: local port only available for expert if a
-	printer has been detected (jloup).
-
-2000-09-11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: reorganized choices of 3D optimizations, added
-	experimental support for expert users.
-	* install_steps_interactive.pm: removed question to keep XF3.
-
-2000-09-05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: removed all previous URI specific mode and
-	added socket and expert URI general mode.
-	* printer.pm: fixed bugs, start lo interface before cups.
-
-2000-09-04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added pnm2ppa and lm110 support in cups
-	configuration. probe for printer device (parallel) and try to
-	install usb for printer.
-	* printer.pm: removed local printer configuration for cups (keep
-	only local configuration using URI).
-
-2000-09-01  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixes to configure XF86Config-4 when XFree-3.3
-	is installed, make 16bits by default on 3D hardware acceleration,
-	fixed selection of hardware for hardware acceleration.
-	* install_steps.pm: add cups for printer configuration, used for
-	auto_install. added new function to add packages only if requires
-	are already satisfied.
-	* standalone/printerdrake: updated.
-
-2000-08-31  dam's  <damien@mandrakesoft.com>
-
-	* moved many things to network.pm and any.pm
-	* everything should be broken now.
-
-2000-08-31  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: removed printer default config (now obsoleted).
-	* install_steps_interactive.pm: add cups support.
-	* printerdrake.pm: add cups support.
-	* printer.pm: add cups support.
-
-2000-08-31  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* install_any.pm (setPackages): install the right glide module
-	according to the Voodoo card detected.
-
-	* Xconfigurator.pm (write_XF86Config): ZAxisMapping for XF 4.
-	(autoDefaultDepth): default depth to 16 for Voodoo cards except
-	for Voodo5 ones.
-
-2000-08-29  dam's  <damien@mandrakesoft.com>
-
-	* moved pppConfig in netconnect.pm and any.pm
-	* moved miscellaneousNetwork in any
-	* modem configuration is now useable in standalone mode.
-
-2000-08-29 David BAUDENS <baudens@mandrakesoft.com>
-
-	* install_steps_interactive.pm: change Small/Normal/Full ->
-	  Minimum/Recommanded/Complete (aka make FredB happy)
-
-2000-08-28  dam's  <damien@mandrakesoft.com>
-
-	* draknet (netconnect): renamed drakfuck -> draknet. standard ADSL
-	and french alcatel ADSL implemented.
-	* Xconfigurator.pm (autologin) : use of the new autologin system.
-
-2000-08-24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* ../update_kernel*: changed reference from extract_archive to
-	packadrake.
-	* Makefile*: added live_install and live_install2.
-	* Xconfigurator.pm: updated Mach64 acceleration to only 3D Rage
-	Pro AGP card type, commented SiS and S3ViRGE support by GLX.
-	* commands.pm, keyboard.pm, lang.pm, pkgs.pm, list, tools/*:
-	updated to use packdrake now.
-	* install2.pm, install_steps.pm, install_steps_gtk, Makefile*:
-	manage live upgrade.
-	* modules.pm: use standard modprobe command for load in live
-	upgrade.
-	* netconnect.pm: added minimal modification for being compilable.
-	* rescue/list: added packdrake and sfdisk.
-	* live_install, live_install2: live upgrade of package.
-
-2000-08-22  dam's  <damien@mandrakesoft.com>
-
-	* drakfuck (netconnect):finished isdn PCI/ISA card implemetation
-	* added isdndb.net: providers database
-
-2000-08-20  dam's  <damien@mandrakesoft.com>
-
-	* moved Netconnect.pm to netconnect.pm
-	* moved DrakFuck to drakfuck
-
-2000-08-18  Pixel  <pixel@mandrakesoft.com>
-
-	* share/Cards+: for i810, force VideoRam
-
-2000-08-18  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: added isdn type in @drivers_by_category. corrected
-	load_thiskind (thx pixel) : it's not unsafe anymore
-	* Netconnect.pm: just display PCI isdn card recognized.
-	
-2000-08-17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: many cleanup. moved some functions to common,
-	any or install_interactive (newly created)
-
-2000-08-16  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm(configureNetwork): added call to
-	isdn configuration
-	* added standalone/DrakFuck: standalone entry point to configure
-	internet connexion.
-	* added Netconnect.pm: internet connexion functions.
-
-2000-08-11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectInstallClass): yet a bigger
-	warning so that people don't choose expert installs. Also set the
-	focus on "Custom" by default.
-	
-	* install_steps_interactive.pm (doPartitionDisks): created, calls
-	the wizard.
-	* install_steps.pm (doPartitionDisksBefore,
-	doPartitionDisksAfter): created (was mainly in
-	install2::doPartitionDisks)
-	* install2.pm (doPartitionDisks): much cleanup
-	* install_any.pm (partitionWizard): working state (still rough)
-
-2000-08-08  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/rpmdrake (AddMedia): fix the ftp addmedia, fix the
-	cdrom addmedia
-
-2000-08-07  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Resize): 
-	* install_steps_gtk.pm (doPartitionDisks): remove the
-	before_leaving ensuring the filehandle is closed
-	* resize_fat/main.pm (DESTROY): use a better solution for ensuring
-	the filehandle is closed
-
-2000-08-07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added SiS6326 in the list of chipset that
-	needVideoRam, reported on ml.
-	* install_steps.pm: fixed auto install of printer.
-
-2000-08-06  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf): created this GREAT function
-	that should have been created a long time ago.
-	* any.pm, install_any.pm, install_steps_gtk.pm,
-	install_steps_interactive.pm: a lot of rewrite to use the new
-	ask_from_listf, a lot of nice cleanup!
-
-	* fs.pm (df): created, returns the free space of the part. Save it
-	in $part->{free}
-
-	* install_steps_gtk.pm (doPartitionDisks): ensure the closing of
-	the device in case of error
-	* resize_fat/main.pm (new): ensure the closing of the device in
-	case of error
-
-	* install_any.pm (partitionWizard): the great partitioning wizard
-	is created. Not finished yet (nor called from anywhere)
-
-	* install_steps.pm (doPartitionDisksLnx4win): created function out
-	of doPartitionDisks
-
-	* install_steps_gtk.pm (installPackages): removed the displaying
-	of size to install (people are bothered cuz not the same size)
-
-2000-08-06  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm (create_steps_window): use drawing area
-	instead of button. Implemented all steps events. 
-
-2000-08-05  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (detect): test a hack for usb mouse via hub
-	(sparhawk@enteract.com)	
-
-	* fsedit.pm (undo): force isDirty and needKernelReread only if hd
-	hasBeenDirty, otherwise believe the flag saved
-	* partition_table.pm (write): flag hd as hasBeenDirty
-
-	* install2.pm: a few renaming of methods so that the step names
-	correspond to install2 function and install_steps* methods (eg:
-	configureX & setupXfree unified to configureX)
-
-2000-08-04  dam's  <damien@mandrakesoft.com>
-
-	* any.pm (setAutoLogin): added this method to write xdm-config
-	* Xconfigurator.pm: clenead autologin code and use of above method
-
-2000-08-04  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (setSelectedFromCompssList): save $nb to able to restore
-	it in case of max_size reached. only purpose is the log!
-
-	* install_steps_interactive.pm (choosePackages): in newbie, ask
-	between Small/Medium/Full install
-	* install_steps_interactive.pm (choosePackages): in expert, have
-	the min_mark be 0 instead of 1
-
-	* common.pm (find_index): added this nice function
-
-	* install_any.pm (getAvailableSpace_mounted): use common::df
-	* loopback.pm (getFree): use common::df
-	* commands.pm (df): use common::df
-	* common.pm (df): added
-
-	* diskdrake.pm (Resize)): add resizing of reiserfs
-	* share/list.i386: add resize_reiserfs
-
-
-2000-08-02  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm : autologin is functionall. When wmsession.d is
-	more up to date, I'll add the list of wm to launch at boot. It
-	writes in /etc/X11/xdm/xdm-config.
-	
-2000-08-01  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (miscellaneous): modify as chmouel want (aka, ""
-	instead of "no" for MOUSE and KEYBOARD in sysconfig/usb)
-
-	* services.pm: separation between interaction and action.
-	* install_steps.pm (servicesConfig): the job is now done here	
-	* install_steps_interactive.pm (servicesConfig): only the asking
-	part	
-
-2000-08-01  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed the below fixe, now ok.
-	* Xconfigurator.pm: fixed a bug for using default card flags
-	setting, add support for GeForce DDR for both 3.3 and 4.0.
-	* pci_probing/pcitable: fixed NV15 (GeForce2) card entry, now use
-	XFree 3.3 as unsupported in XFree 4.0.
-	* share/Cards+: added "NVIDIA GeForce2 DDR (generic)".
-
-2000-07-31  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed provided package with choice in deps used with a
-	base package, complicated but kernel-fb or similar can be
-	unselected now.
-
-2000-07-27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: changed expert message to ask
-	using XFree 3.3 instead of XFree 4.0 used by default (server).
-	* Xconfigurator.pm: make sure only one server is installed,
-	default to XFree 4.0 if supported unless XFree 3.3 accept
-	3D acceleration and not XFree 4.0, ask user in such case.
-	* pci_probing/pcitable: added Intel 815 pci ids.
-
-2000-07-26  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: applied new LN stars, logo title and help
-	logo. improved steps appearences.
-	* modified share/step-*.xpm
-	* added share/help.xpm
-	* updated ../HACKING to ling help logo.
-
-2000-07-21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: enable 3D acceleration configuration with
-	XFree86, use /usr/X11R6/lib/modules/glx-3.so for X version 3
-	Utah-GLX accelerated module.
-
-2000-07-20  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: use {miscellaneous}{autologuser} instead of
-	{miscellaneous}{autologuser} + {miscellaneous}{autologing}.
-	* move some README content to ../HACKING
-
-2000-07-19  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: added autologin boxes.
-	result is in {miscellaneous}{autologin} and in
-	{miscellaneous}{autologuser}
-	
-2000-07-19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: added default root to existing root device when adding
-	an entry in bootloader.
-	* bootloader.pm: avoid duplicating entry (floppy and old-floppy)
-	when they are identical.
-	manage hackkernel by suggest an entry by default if installed.
-	* install_steps.pm: reworked symlink closure for bootloader
-	to keep previous configuration.
-
-2000-07-11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: merged lilo.pm and silo.pm inside bootloader.pm,
-	this include a configure_entry from silo.pm to build a initrd if
-	used.
-	* share/compssList: added kde2 packages.
-	* share/compssUsers: added kde2 group, renamed kde to kde1 group
-	specific.
-
-2000-07-07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm (choosePackages): always execute setPackage to copy
-	hdlist* and depslist files (support mixed partitionDisks and
-	choosePackages).
-	* install_any.pm (setPackages): avoid clearing upgrade flag.
-	* install_steps.pm (choosePackages): use $first_time to avoid
-	reselection of packages according to compssList.
-	* install_steps_interactive (choosePackages): use $first_time and
-	$individual to avoid reselection of packages according if user go
-	back to step choosePackages.
-	* pkgs.pm: added psUpdateHdlistsDeps to restore hdlist* and
-	depslist files in /var/lib/urpmi.
-	* diskdrake.pm: fixed uneditable combo for Mount point action.
-
-2000-06-23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: better approach for Sun* server in newbie.
-	* fs.pm: added romfs support for mount.
-	* fsedit.pm: changed auto allocation for partitions for sparc*.
-	* install2.pm: restored bootdisk creation and auto install boot
-	disk creation for sparc*.
-	* install_any.pm: changed vfat to romfs when mounting kickstart
-	floppy on sparc*.
-	* install_steps.pm: avoid proposing formating sunos partition.
-	* install_steps_interactive.pm: boot disk for sparc* and support for
-	installation of SILO on /boot partition (sparc*).
-	* install_steps_newt.pm: removed cylinder 0 bug warning.
-	* interactive.pm: fixed typo for not_edit set to 1 by default.
-	* partition_table.pm: fixed get_holes on sparc* where a whole disk
-	partition caused problems.
-	* partition_table_sun.pm: removed cylinder 0 bug as found in mke2fs.
-	* silo.pm: handle /boot partition, install silo.conf in /boot and
-	make a symlink from /etc.
-	* share/list.sparc: added losetup and genromfs for boot disk creation.
-
-2000-06-21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: changed the way console font data is written; not all
-	of the [0], [1], [2] values must defined, so three cases must be used.
-	Also added a variable $CHARSET for /etc/sysconfig/i18n; it can then
-	be used by console-tools to load the proper compose table
-
-2000-06-20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* c/sbus.c: added some functions for silo.c integration.
-	* c/silo.c: initial release including write in prom, and translation
-	of disk name from openprom to linux, rh version modified.
-	* silo.pm: added write in prom, support of sunos boot from silo.
-	* partition_table.pm: added support for ufs partition like windows one.
-	* install_steps_interactive.pm: added other entries in silo.
-	* install_steps.pm: support sunos partition.
-	* install_any.pm: automatically mount sunos partition with diskdrake.
-	* fsedit.pm: added /mnt/sunos suggested mount point.
-	* fs.pm: added ufs support for mount.
-
-2000-06-19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* crypto.pm: modified for getting sparc crypto file for sparc*.
-	* modules.pm: make sure to load sd_mod when needed.
-	* pci_probing/main.pm: always use loaw_endian in pci structs.
-	* pci_probing/translate-pcitable.pl: added arch specific module name
-	translation.
-
-2000-06-16  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): rename conf.modules to modules.conf if
-	needed. Outputs to modules.conf
-
-	* detect_devices.pm (cdroms): fix using scd0 for ide-burners when
-	already a scsi cdrom drive
-
-2000-06-13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* pkgs.pm: added 'acon' requirement for all right-to-left languages
-
-2000-06-07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: added SunOS partition as blue for diskdrake.
-	* install_steps_interactive.pm: make sure of no division by zero may
-	happen.
-	* install_steps_newt.pm: added WARNING for fdisk on sparc*.
-	* modules.pm: make sure of loading sd_mod module after any scsi module.
-	* sbus_probing/main.pm: insmod openprom before trying sbus probing.
-	* pkgs.pm: corrected by use of parabolic solution for size approximation.
-	* silo.pm: try with "silo -p 2 -t" if "silo -t" has failed due to bad probe.
-
-2000-06-05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* install_steps.pm,lang.pm: added load_console_font, to load the 
-	proper console fonts (text mode install is not very useful otherwise)
-
-2000-06-03  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Create): don't accept less than 32MB part for reiserfs
-	* diskdrake.pm (Type): don't accept less than 32MB part for reiserfs
-
-2000-06-01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/fonts.tar.bz2: replaced the Korean 16pt fonts by a 12pt font;
-	it fits better with the other fonts. Added a 'README' file with
-	some comments and the required copyright notice
-
-2000-05-29  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added support for SBUS card autodetection.
-	* commands.pm: added lssbus to list SBUS devices detected.
-	* detect_devices.pm: removed alpha restriction on USB.
-	* install_steps_interactive.pm: added SBUS support.
-	* c/sbus.c: initial revision, core SBUS support (inspired from kudzu).
-	* c/stuff.xs.pm: added wrapper for sbus.c interface.
-	* sbus_probing/main.pm: initial revision (inspired from kudzu).
-
-2000-05-27 Adam Lebsack <adam@mandrakesoft.com>
-
-	* share/list.ppc: various PPC modifications, for HFS
-	* partition_table_mac.pm: bug fixes
-	* partition_table.pm: various HFS fixes, isHiddenMacPart()
-	* diskdrake.pm: added HFS to top buttons when run on PPC
-	* keyboard.pm: fixed name of mac-fr2-ext keymap
-	* install_steps_gtk.pm: added Xpmac server support for PPC.
-	* install_steps_interactive.pm: disallow hardware configuration on PPC for
-	now.  All drivers should be in the kernel. setup_this_kind().
-	* fsedit.pm: fixed verify_hds for PPC, /proc/partitions will never match
-	our partition table read.  Added PPC grep condition for PPC in get_visible_fstab.
-	* fs.pm: fix argument for HFS formatting.	
-	* Makefile: special installation of PPC files.
-
-2000-05-25  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* standalone/drakboot: Don't display Configure-/LILO/GRUB/ on
-	alpha|sparc.
-
-2000-05-25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* silo.pm: added configure_entry to try creating an initrd for an image
-	entry in bootloader. fixed wrong usage of run_programm::rooted with 2>.
-	* commands.pm: fixed insmod command to take modules64.cz* on sparc*
-	* install2.pm: removed create boot disk and create auto install disk on
-	sparc*. force writing of /etc/conf.modules for step setupBootloader.
-	* install_steps.pm: fixed upgrade for sparc* and disable supermount for sparc*.
-	* install_steps_interactive.pm: added missing $prefix for glob_. call
-	configure_entry in setupSILO. fixed cancel or None entry on setupBootloader.
-	* modules.pm: updated alias for sparc*.
-	* any.pm: fixed proprable wrong test for setupBootloader in beginner at
-	the very beginning.
-	* printer.pm: fixed typo.
-	* Xconfigurator.pm: avoid testing if using a Sun* server, added depth and
-	resolution for these server too.
-
-2000-05-24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* partition_tabel.pm: fixed wrong detection of DOS partition on sparc*.
-	* partition_table_sun.pm: fixed a bug when reading partition table
-	with unused partition in the middle of the table.
-
-2000-05-23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* common.pm: update arch to take into account sparc and sparc64. added
-	better_arch and compat_arch function.
-	* silo.pm: fixed adding new kernel automatically.
-	* install2.pm: removed create boot disk stuff for sparc*.
-	* install_steps.pm: added initrd generation for alpha. added ldconfig
-	at end of installation. removed /usr/bin/dumpkeys existence test on
-	sparc*, should be added in the future.
-	* install_steps_interactive.pm: removed supermount for sparc*.
-	* install_steps_gtk.pm: added /dev/kbd device creation and permedia2
-	support for sparc*. removed screen limit of 1024x768.
-	* detect_devices.pm: fixed problem on machine with really no IDE interface.
-	* modules.pm: added support for 32 and 64 bit architectures on sparc*.
-	* install_any.pm: fixed getAvailableSpace_mounted if /usr is not a separate
-	partition.
-	* pkgs.pm: added support for multi-arch rpm file (need for sparc*),
-	fixed correctSize and invCorrectSize to take back a linear approximation
-	above 9Gb approximatively. removed ftp rewind as broken currently.
-	* keyboard.pm: fixed bad list of available keyboard (broke sparc*), fixed
-	globing (removed) against existing '*'.
-	* partition_table.pm: removed support for non SUN partition table, as it
-	may freeze the kernel or may be blanked?
-	* Xconfigurator.pm: take Sun24 server by default on sparc*, add support
-	for permedia2 card (3DLabs server).
-	* share/list.sparc: added perl-5.6.0 for sparc*, fixed for sparc*.
-	* Makefile: added support for modules and modules64 for sparc*.
-	* c/stuff.xs.pm: added kernel_arch function for getting the current true
-	architecture provided by the kernel (uname -m).
-
-2000-05-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (kdeicons_postinstall): the URL link to doc must
-	be $lang/index.html, not only $lang.
-
-	* standalone/mousedrake: add handling of XF86Config-4
-
-	* any.pm (setupBootloader): fix bug (was adding 2 glob_'s)
-
-2000-05-08  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): move the touch of some files here to please linuxconf
-	
-	* install2.pm (miscellaneous): s/KBD/KEYBOARD/
-
-	* lilo.pm (install_grub): don't keep symlinks for reiserfs
-	* lilo.pm (suggest): allow grub everytime now (not only if !reiserfs)
-
-	* install_any.pm (getHds): default mount point for windobe in
-	lowercased for StartOffice(!)
-
-2000-05-08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/keyboards.tar.bz2: Fixed Brazilian keyboard (.br); added
-	  Iranian (.ir), Arabic (.ar) and new Lithuanian (.lt_new) keyboards
-	* keyboard.pm: Added new Lithuanian keyboard and changed the
-	  string for brazilian ABNT-2 to state more clearly its ABNT nature
-	  (it is not a standard PC keyboard; it uses some different keycodes)
-
-2000-05-07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (choosePackages): return availableCorrected
-	instead of available
-
-	* pkgs.pm (correctSize): add 18MB for full multi-cd (many hdlist's)
-
-	* modules.pm (text2driver): same as text2lang below
-	* keyboard.pm (text2keyboard): same as text2lang below
-	* lang.pm (text2lang): replace the while (... each) by a foreach
-	(keys) (because each is dangerous if loop is exited)
-
-	* install_steps_interactive.pm (selectKeyboard): better handling
-	of multiple langs question.
-
-	* ftp.pm (new): Timeout set to 60 (seconds), was default (120)
-
-	* install_steps_interactive.pm (setup_thiskind): remove ide-*
-	from modules displayed as loaded.
-
-2000-05-06  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm (check_mntpoint): verify that standard mntpoints (/
-	/usr) are not on not trueFS
-
-	* any.pm (setupBootloader): add $prefix for the 2 glob_'s
-
-2000-05-07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/keyboards.tar.bz2: added Ukrainian keyboard xmodmap.ua
-
-2000-05-06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* printerdrake.pm: fixed English error
-
-2000-05-05  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): remove the special case
-	for fbdev.
-
-	* install_steps_interactive.pm (setup_thiskind): replace return by
-	next in case load_module fails.
-
-	* install_steps_gtk.pm (selectInstallClass1): translate Install/Upgrade
-
-	* Xconfigurator.pm (cardConfiguration): force xf4 for rage 128's
-	* Xconfigurator.pm (testFinalConfig): force $bad_card for xf4
-
-	* pkgs.pm (correctSize): updated for 7.1
-
-	* install_any.pm (getAvailableSpace): move the removing of
-	$minAvailableSize here.
-
-2000-05-04  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (configurePrinter): give clicked to printerConfig
-
-	* interactive.pm (ask_from_entries_ref): set default val if not_edit
-
-	* interactive_newt.pm (ask_from_entries_refW): remove setting of
-	default val. Now done in interactive::ask_from_entries_ref
-
-	* interactive_gtk.pm (ask_from_entries_refW): handle empty value
-
-	* modules.pm (read_already_loaded): ensure that already loaded
-	modules are put in %loaded.
-	* modules.pm (load_ide): add loading if ide-probe-mod (for new kernel)
-
-	* lilo.pm (install_lilo): truncate label's to 15 chars
-
-	* install_any.pm (generate_ks_cfg): fix missing space
-	* install_any.pm (generate_ks_cfg): fix bug for nfs comand
-
-	* install2.pm: get rid of autoformat
-	* install_steps.pm (choosePartitionsToFormat): get rid of autoformat
-
-2000-05-03  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (setupBootloader): replace ask_many_from_list by
-	ask_from_list for bootloader choice
-
-	* services.pm (drakxservices): stop immediately service if removed
-
-	* install_steps.pm (configureNetwork): replaced dhcpxd by dhcpcd
-	* install_steps.pm (afterInstallPackages): touch some files to
-	please linuxconf
-
-2000-05-03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: updated min size, fixed kppprc generation.
-	* install_any.pm: make sure postinstall-rpm is here before
-	erasing (avoid error on reboot only).
-
-2000-05-02  Pixel  <pixel@mandrakesoft.com>
-
-	* raid.pm (format_part): don't call raid::make if part is already
-	formatted (as raidstop fails)
-
-	* Xconfigurator_consts.pm: Rage128 and 3dfx are not available any
-	more	
-
-	* install_steps_interactive.pm (setup_thiskind): make insmod'ing
-	fail a simple warning.
-
-	* Xconfigurator.pm (readMonitorsDB): adapt to new MonitorsDB
-	* share/MonitorsDB: take new one from RedHat
-
-	* standalone/drakboot: added kfloppy
-
-	* g_auto_install: add $dir/lib to LD_LIBRARY_PATH (it was silly
-	not to have it)
-
-2000-05-01  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): remove
-	NIS_server, use NIS instead
-	* install_any.pm (setAuthentication): remove NIS_server, use NIS instead
-
-	* standalone/rpmdrake (AddMedia): hdlist.cz2 instead of hdlist
-
-2000-04-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): fix yet another bug for
-	ttf from windobe handling
-
-	* install_steps_interactive.pm (selectInstallClass): hide beginner
-	mode in corporate. Display special help.
-
-2000-04-29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* my_gtk.pm: added call to Gtk->init; that makes 16 bit locales
-	text to be properly aligned (reported by Craig Chang
-	<craig_chang@taipei.siscomm.com.tw>)
-	* common.pm: now that po handling is correct, I changed the order
-	of reading variables so that it follows the standards ($LANGUAGE first)
-	* share/fonts.tar.bz2, lang.pm: added an 8pt font for cp1251
-
-2000-04-28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps*.pm: added support for selection of package during
-	upgrade the same way it is done for installation. added check of
-	minimal size, abort else (at least let the user know about :-)
-	fixed crypto if no network interface available.
-	* install2.pm: fixed problem during upgrade that lost network
-	configuration.
-
-2000-04-28  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_raw): don't call commands::insmod, do it in
-	place. Merge with load_multi
-
-	* install_steps.pm (afterInstallPackages): fix windobe ttfonts
-	symlinking	
-
-	* Xconfigurator.pm (cardConfiguration): load module agpgart for
-	i810
-	
-	* install_any.pm (getHds): changed the mount point setting for
-	windows partitions as device_windobe is not unique
-
-2000-04-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (create_steps_window): changed to adapt to
-	new hidden format
-
-	* install2.pm (@installSteps): changed the way hidden is handled.
-	Now it is a true perl expression (great power now)
-
-	* install_steps_gtk.pm (selectInstallClass1): update steps window
-	before asking normal/devel/server. Nicer!
-
-	* install_steps_interactive.pm (configureNetwork): when "Cancel"
-	pressed at network interface configuration do not skip all
-	configuration.	
-
-2000-04-26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm (pppConfig): modified a lot, removed template
-	file for ifcfg and chat file.
-
-2000-04-26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): use a fix width for
-	the tree column (so that the checkbox are always visible without
-	scrolling)	
-
-	* standalone/drakboot: drakfloppy and gfloppy are X only, no need
-	to propose them in console
-	
-	* install_any.pm (relGetFile): added auto_inst to files to get
-	from Mandrake/base
-
-	* install2.pm (main): changed auto_inst behaviour
-
-	* standalone/adduserdrake: fix a bug (s/$o/$in/g)
-
-	* interactive_newt.pm (ask_from_entries_refW): now handling
-	complete/changed/focus_out callbacks (at least more than before)	
-
-	* Newt/Newt.xs: added rough callback handling
-
-2000-04-25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added support for PPA more easily, allow
-	printers entry using ppa driver event if pnm2ppa not installed,
-	install it if neccessary after.
-	* network.pm, install_steps.pm, install_steps_interactive.pm:
-	added support for stoping a network interface, usefull for ppp0 to
-	avoid using it too long.
-	* install_steps.pm: fixed missing local on pap_secrets file.
-
-2000-04-25  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm (install): moved the generation of the keytable here. It
-	is used by both lilo & grub (lilo is not always installed as was
-	assumed)	
-
-	* common.pm (formatAlaTeX): remove bounding spaces
-
-	* pkgs.pm (setSelectedFromCompssList): remove the hack for min
-	mark 25 in beginner
-	* install_steps_interactive.pm (choosePackages): set $min_mark to
-	25 in beginner
-
-2000-04-24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setupXfree): add a yesorno
-	question for choosing between XF4 and XF3 in expert
-
-	* install_steps_gtk.pm (choosePackagesTree): enlarge the tree window
-
-	* install_any.pm (update_userkderc): make sure uid and gid are kept
-
-	* diskdrake.pm (Create): add Extended_0x85 as a choice for expert
-
-	* partition_table.pm (add_extended): handle a 3rd arg,
-	$extended_type to tell which kind of extended partition is wanted
-	* partition_table.pm (adjust_main_extended): in non-expert,
-	automatically set extended to linux-extended if there's only
-	linux-type partitions.	
-
-2000-04-22 Pablo Saratxaga <pablo@madrakesoft.com>
-
-	* install_steps_interactive.pm: s/Mb/MB/ as 'b' is symbol for bit
-	  and not for byte. RAM is expressed in megabytes -> MB
-
-2000-04-19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fixed crazy mutli CD manipulation.
-	* printer.pm: fixed wrong prototype of print_pages.
-	* install2.pm: set version to 7.1 for crypto stuff.
-	* crypto.pm: commented ackbar crypto site.
-
-2000-04-17  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm (suggest): in failsafe, runlevel ASKRUNLEVEL (handled by
-	linuxconf)	
-
-2000-04-14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): don't
-	ask about checking bad blocks for reiserfs, cuz not handled
-
-	* fs.pm (mount): reiserfs handling
-	* fs.pm (format_reiserfs): added
-	* fs.pm (write_fstab): add option "notail" for reiserfs if
-	the partition holds the kernel (/boot or /)
-
-	* partition_table.pm (isTrueFS): added, replaces most occurences
-	of isExt2
-
-2000-04-12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: force installation step if package have been
-	selected on step choose packages.
-	* install_any.pm: protected against die in perl (setstep or
-	theme_changed).
-
-2000-04-11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* resize_fat: added some limits verification.
-	* interactive_gtk.pm: corrected swap of arg with help adding.
-
-2000-04-10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* interactive_gtk.pm, my_gtk.pm: added tooltips for ask_from_list,
-	which is used by printerdrake only. drops key bindings.
-
-2000-04-07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/serial_probe: obsoleting pnp_serial which is now replaced
-	by this one, taken from kudzu, really faster and probe all serial
-	devices at one time. modified to probe correctly modem :-)
-	* mouse.pm: updated to use serial_probe interface of
-	detect_devices.pm.
-	* detect_devices.pm: modified to use serial_probe, cache probed
-	devices to avoid reprobing.
-
-2000-04-06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps.pm: added support
-	for peerdns options of ppp, so removed dns address unless expert.
-
-2000-04-05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* crypto.pm, install_steps_interactive.pm, install2.pm,
-	install_steps.pm: added crypto stuff to support hdlist-crypto.cz2
-	and depslist-crypto. dependancies are not supported but with a
-	simpler format of depslist file where closure are not done and
-	only package name are used for dependancies.
-	* pkgs.pm: added better support for multi CD manipulation,
-	including selection and refus.
-
-2000-04-04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: modified selection packages from compssList by
-	incremental selection, much more quickly.
-	added selected medium for selecting a package.
-	* install_any.pm: refused media hash transfered to selected value
-	of media table.
-	@needToCopy list should only have package of default medium.
-
-2000-04-03  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (format_ext2): add options "-b 1024 -O none" for alpha
-
-2000-03-31  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: made changeMedium sub modification
-	permanent.
-	* pkgs.pm: modified upgrade to avoid use of header.
-
-2000-03-31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: some more choices for PPC keyboards
-
-2000-03-30  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2pm: added eval around loading af_packet and postinstall
-	copy of RPMS.
-	* devices.pm: added /dev/kdb for SPARC.
-	* install_any.pm: modified multi CD management, postinstall copy
-	of RPMS.
-	* install_steps_gtk.pm: added support for Xsun server for SPARC.
-	* install_steps_interactive.pm: added multi CD dialog box for
-	selecting CD available. Serialized ethernet configuration and ppp
-	configuration.
-	* pkgs.pm: added check for infinite recursion for bad depslist.
-	* printer.pm: better test for reparse of printerdb.
-	* Xconfigurator.pm: added support for Xsun server for SPARC.
-
-2000-03-30  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): enhance tree selection
-
-2000-03-29  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (wait_messageW): add some padding (nicer)
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): created,
-	creates a floppy for auto installs.
-
-	* install_any.pm (generate_ks_cfg): created, generates stage1
-	ks.cfg file
-
-	* share/po/DrakX.pot: added special comment for grub entry
-
-2000-03-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard): sort langs for
-	many-lang install
-
-	* mouse.pm (write): add WHEEL telling if a wheel mouse is there
-
-2000-03-28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: added entries for all three Armenian keyboards
-
-2000-03-26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (install_urpmi): full support for multi-hdlist's	
-
-	* pkgs.pm (extractHeaders): look for hdlist in /tmp instead of
-	$prefix/var/lib/urpmi
-	* pkgs.pm (psUsingHdlists): put hdlist's in /var/lib/urpmi with a
-	fake name. Access via /tmp/$hdlist is given for non-fake name
-
-	* detect_devices.pm (hasHPT): return undef if no htp (silly me :-/)
-
-2000-03-25  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm: updated to the new format of entries. It was an hash.
-	Now the key is field kernel_or_dev, and entries is an array.
-	
-	(get): added, it returns the entry using a kernel
-	   (needed because entries is no more a hash)
-
-	* install_steps_interactive.pm (setupLILO): adapted to the new format
-
-	* Xconfigurator.pm (write_XF86Config): basic XF86Config-4 handling	
-
-	* fsedit.pm (suggest_part): if suggested part contains a field
-	"hd", ensure the partition is created on this hard drive
-
-	* install2.pm (main): before leaving installation, remove
-	/var/lib/urpmi if urpmi not installed	
-
-	* diskdrake.pm (Resize): ext2resize to size $part->{size} instead
-	of $size
-
-2000-03-24  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (hasHPT): added. Now nice handling of hpt366
-	(ultra66) without rebooting and making special floppy :)
-
-	* lilo.pm (install_grub): much better grub configuration (better
-	than lilo's :pp)
-
-	* install_steps.pm (setupBootloaderBefore): remove entry floppy
-	for security > 3
-
-2000-03-23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (selectMouse): added, takes care of telling
-	the X server if the user changed the mouse type. Only done if
-	a serial mouse is chosen.
-
-	* install_steps_newt.pm (doPartitionDisks): add a call to
-
-	* mouse.pm (write): added "device=" in etc/sysconfig/mouse for
-	devfs (it looses the symlink /dev/mouse)
-
-2000-03-22  Pixel  <pixel@mandrakesoft.com>
-
-	* pci_probing/pcitable: replace Server:Rage128 by proper XFree entry
-
-2000-03-20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm, fs.pm, install_any.pm: added supports for
-	LS-120 floppy drive and icons on desktop of KDE (untested).
-	* printer.pm, printerdrake.pm: added supports for PPA interface in
-	new rhs-printfilters, always enable "Print text as postscript"
-	option for such printers.
-
-2000-03-20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: changed XKB name for Swedish keyboard
-	  changed XKB names for Russian and German keyboards
-	  added a choice for "Croatian" keyboard
-	* share/compss{,List}: added various new locales-*, ispell-* 
-	  and netscape-* files. changed ppa to pnm2ppa.
-
-2000-03-17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: added setup for all configured queue.
-	* install_steps_interactive.pm: modified for retrieving packages
-	or current configuration.
-	* printer.pm: correction, tested retrieve of printer
-	configuration without printtool comments in printcap file: added
-	update of entry according to gsdriver used (untested again).
-	* printerdrake.pm: better handling of cancel, manage of multiple
-	queue definition together (as lp|My printer).
-
-2000-03-16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: moved in printerdrake.pm the test
-	of printer usage.
-	* printerdrake.pm: heavy modification to handle multiple queue,
-	corrected some bugs too, added much more features as printtool.
-	* printer.pm: added more features for filter, allow printer to be
-	retrieved without help of printtool id in printcap file (untested).
-
-2000-03-14  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Loopback): handling of the file loopback: test
-	existence of the file and take its size.
-
-2000-03-14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: corrected for duplicate file on other CD.
-
-2000-03-13  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (floppies): don't return hash but the device name
-
-2000-03-13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm, install_any.pm: small correction for multiple media
-	installation.
-	* tools/syncrpms: added for handling synchronisation of multiple source
-	rpm directories (and multiple target), include cleaning.
-	* tools/closurepkgs: tools to get rpm that may be installed by DrakX
-	after normal packages installation (printer, network, X11...), may
-	be used to duplicate on other CD some important stuff of the first
-	one.
-
-2000-03-12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): compute the
-	max_size very simply (sum of all package sizes), otherwise too costly
-
-	* pkgs.pm (install): call cleanHeaders at the end
-	* pkgs.pm (cleanHeaders): created
-
-	* install2.pm (miscellaneous): /etc/msec/init.sh is now
-	/usr/sbin/msec (yoann thanks for not telling :pp)
-
-	* pkgs.pm (install): remove the $prefix of mountpoints for not
-	enough room to install error message
-
-2000-03-11  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm (_create_window): add callback on focus to
-	ensure_focus. The result is no more 3 focus states with 2 buttons.
-
-	* interactive_gtk.pm (ask_from_treelistW): better keyboard handling
-
-	* raid.pm (make): check the result of mkraid. Suggest raidtools
-	are missing in standalone diskdrake
-
-	* devices.pm (set_loop): created, searches for an available
-	loopback and sets the file to it
-
-	* lilo.pm (dev2grub): fixed a missing slash
-
-	* interactive_gtk.pm (wait_message_nextW): do not update if same
-	message, otherwise silly gtk won't do anything and we'll wait
-	forever :(
-
-2000-03-10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* *.pm: heavy modification to take into account multiple media
-	installation.
-
-2000-03-10  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (@install_classes): cleanup, no more i18n (is now in
-	install_steps_interactive), remove old entries
-
-2000-03-09  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): don't add alias block-major-11 in every case
-	* modules.pm (add_alias): special case oss (post-installs modprobe snd-pcm-oss)
-
-	* fs.pm (format_*): move the @options before the device
-
-	* loopback.pm: created, added a lot of stuff for loopback in
-	diskdrake.pm, fs.pm...
-
-2000-03-08  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm: %type2fs replaced ox402 by 0x402
-
-	* detect_devices.pm (cdroms): fix "scd" (should be "scd0")
-
-	* install_any.pm (install_urpmi): update for new hdlist.cz2
-
-2000-03-07  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_treelistW): s/focus_row/set_focus_row/
-
-	* install_steps_interactive.pm (addUser): force add a normal user
-	for security 4
-
-2000-03-05  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm (_ask_from_list): replace focus_row with set_focus_row
-	(tis the Gtk-Perl 0.7002 was of doing)
-
-2000-03-04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): add ide-floppy to the modprobes of
-	post-install supermount
-
-2000-03-03  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm (ps): add RSS to ps command
-
-2000-03-02 Adam Lebsack <adam@mandrakesoft.com>
-
-	* mouse.pm: added mac mouse detection to mouse::detect.
-	* detect_devices.pm: added a routine to probe /dev/usbmouse on macs.
-
-2000-03-01  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* *.pm: heavy modification to take into account smaller
-	transaction during installation.
-	still a lot of test to perform, no provides updated currently and
-	building of hdlist.cz2 and depslist.ordered need old files...
-	nothing done for hdlist.gz during post installation, but
-	hdlist.cz2 is already copied in /var/lib/urpmi [and is used during
-	installation of packages as extract_archive need a true file].
-
-2000-03-01  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm (install_grub): creation
-
-	* network.pm (write_interface_conf): ONBOOT = !pcmcia
-
-	* install_steps_gtk.pm (new): more intelligent SIGCHLD handler
-
-2000-02-29  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: moved common network stuff from "net" to "network"
-	(modules like nfs lockd...)
-
-	* fs.pm (write_fstab): moved the sort to the right place
-
-	* services.pm (drakxservices): chkconfig --list is i18n'ed :(
-	set LANGUAGE=C before
-
-	* partition_table_raw.pm (get_geometry): geom{cylinders} must not
-	be a decimal value :)
-
-	* install_steps_gtk.pm (create_logo_window): set_name logo for
-	logo window
-	* share/install.rc: force disabling of background image theme
-
-	* install_steps_gtk.pm (enteringStep): add step information for
-	console 1
-
-	* any.pm (addKdmIcon): new function
-	* install_steps.pm (addUser): handle field icon
-	* install_steps_interactive.pm (addUser): add choice of kdm icon
-	* standalone/adduserdrake: add choice of kdm icon
-
-	* diskdrake.pm (ask_all_data...): change for easier i18n
-
-	* install_steps.pm (miscellaneous): add CLEAN_TMP handling
-	(need cleaning?)
-	* install_steps_interactive.pm (miscellaneous): add CLEAN_TMP
-	option in expert
-	* install2.pm (miscellaneous): add CLEAN_TMP option for
-	/etc/sysconfig/system	
-
-	* install_steps_interactive.pm (miscellaneous): forbidden
-	useSupermount if high security.	
-
-	* mouse.pm (detect): fix bug (ttyS instead of ttyS0)
-
-2000-02-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (createXconf): do not use "Generic VGA" for
-	svga and accel. SVGA also wants 16 bpp. added ugly modeline for
-	800x600.	
-
-	* partition_table_raw.pm (get_geometry): when the
-	HDIO_GET_IDENTITY fails, defaults to what GETGEO gave
-
-	* install2.pm (main): use modules::load_multi to increase boot
-	start time
-
-	* modules.pm (load_multi): added this function for loading many
-	modules at once.
-
-	* install_steps_gtk.pm (new): increase time before timeout
-
-	* detect_devices.pm (cdroms): change the device associated with
-	ide-burners (hdX -> scdX). Problem is how to know the X in scdX :(	
-
-	* modules.pm (write_conf): sort scsi_hostadapter's
-
-2000-02-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): load ide-probe and the like in 'prereq' type
-	so no aliases are added to conf.modules
-
-2000-02-25  Pixel  <pixel@mandrakesoft.com>
-
-	* devices.pm (make): small code cleanup
-
-	* partition_table_raw.pm (adjustEnd): more explicit error message
-
-	* fsedit.pm (allocatePartitions): fix a bug (size was getting too
-	big after each allocation) making adjustEnd cry
-
-2000-02-24  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (new): added the "new" method to initialize
-	windowheight for isStandalone
-
-	* install_steps_gtk.pm (new): returns undef in case no X server
-	works	
-
-	* install2.pm (main): moved the ejectCdrom from install_steps::END
-	to here
-	* install2.pm (main): fix the $SIG{SEGV} handler
-	* install2.pm (main): added a "try again" in text install if the
-	"new" fails
-
-	* install_steps_interactive.pm (createBootdisk): fix an error for
-	non fdX choice of floppy drive
-	
-	* install_steps_interactive.pm (setup_thiskind): remove the
-	"defined @l"
-
-2000-02-23  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (%suggestedPartitions): remove any /boot entries
-	* install2.pm (selectInstallClass): removed the special code to
-	/boot entries from suggestedPartitions for on non-intel (and it
-	was buggy :)
-	* fsedit.pm (@suggestions): remove the /boot entry
-	* fsedit.pm (check_mntpoint): remove the 1024 cylinder check	
-	* fsedit.pm (suggest_part): remove the 1024 cylinder special case
-
-	* install_steps_interactive.pm (setupLILO): replace linear option
-	by lba32
-
-	* lilo.pm (suggest): add lba32 by default
-
-	* install_steps_interactive.pm (load_thiskind): moved the HPT
-	stuff to install_any::ultra66 and call it.
-	Add sound card configuration (3 lines :)
-
-	* my_gtk.pm and interactive_gtk: resize the list and tree based on
-	root window size
-
-	* install_steps_gtk: $width and $height goes $::rootwidth and
-	$::rootheight, also other dimensions goes global (main::)
-
-	* commands.pm (strings): replace the typo \{$n,} by {$n,}
-
-2000-02-23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* build_archive, extract_archive: changed format of TOC to speed
-	up extraction of archive, now 5 to 6 times faster to read TOC :-)
-	
-2000-02-22  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: load "Cards" database only to translate NAME
-	to fields. Added file CardsNames created from Cards using
-	share/Cards2CardsNames. Kind of list of normalized NAMEs	
-
-	* MonitorsDB: replace the ` ' separator for vendor by `|'
-
-	* install_steps_interactive.pm (timeConfig): use ask_from_treelist	
-
-	* interactive_gtk.pm (ask_from_treelist): creation of
-	ask_from_treelist. Usage is just the same as ask_from_list with
-	one more argument (the separator eg: |, /)
-
-2000-02-21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: fixed deadlock while trying to create partition
-	when available space is equal or less than 2 cylinders. fixed
-	Create action on corrupted partition by removing stalling window.
-	Blocked partition table writing if there are error by forcing user
-	to correct partition table.
-	* partition_table.pm: fixed typo in verifyParts with cdie, added
-	verifyParts on Resize action.
-	
-2000-02-21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (create_big_help): display the help in full
-	screen	
-
-	* my_gtk.pm (_create_window): add big help on F1
-
-	* common.pm (add2hash): now returns the first parameter
-
-	* mouse.pm (detect): really defaults to serial mouse
-
-	* interactive.pm: add ask_many_from_list_with_help and
-	ask_many_from_list_with_help_ref
-
-	* services.pm: creation, it handles what was in
-	standalone/drakxservices
-
-2000-02-18  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (createXconf): added /dev/ (X wants
-	"/dev/psaux" and not "psaux")
-
-	* diskdrake.pm (Create): show start sector even for non-expert on
-	non-i386
-
-2000-02-16  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (detect): add defaults to serial mouse
-
-	* install_steps_gtk.pm (createXconf): remove the defaults to
-	serial mouse
-
-2000-02-15  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: "After %s partition %s," inlined otherwise does
-	not please pablo and translators...
-
-2000-02-14  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Create): hide start sector choice for non-expert
-
-2000-02-11  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_raw.pm (get_geometry): do not use the cylinder
-	number given by HDIO_GETGEO cuz limited to 16bits. Compute using
-	the total_sectors using HDIO_GET_IDENTITY
-
-	* c/stuff.xs.pm: added total_sectors (gives the number of sector
-	of a drive)
-
-	* modules.pm (load): ignore error in loading prereq's
-	
-	* modules.pm (@drivers_by_category): rcpci instead of rcpci45,
-	z85230 added
-
-	* commands.pm (mount): add modules::load_deps otherwise the
-	fs::mount won't succeed insmoding vfat if needed
-
-2000-02-11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* fixed diskdrake to handle limit case when creating and resizing
-	partition table, address size limit and start sector limit.
-
-2000-02-11  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): add a callback on SEGV
-	-> message printed
-	-> that way, ENDs are called (otherwise skipped)
-
-	* install_steps_interactive.pm (setup_thiskind): handles the undef
-	value returned by load_thiskind
-	
-	* install_steps_interactive.pm (exitInstall): do not call
-	install_steps::exitInstall
-
-	* install_steps (exitInstall): removed
-	* install_steps (END): added (it does ejectCdrom)
-
-	* install_steps_interactive.pm (load_thiskind): returns undef if
-	error loading a module
-
-	* fs.pm (format_part): changed the prototype from $;$@ to $;@
-	otherwise, @options always have a value (mostly undef) and mkdosfs
-	fails (with "mkdosfs", "/dev/hdXX", undef, "-F", 32)
-
-	* install_steps_interactive.pm (setup_thiskind):
-	add a $auto_probe_pci that overrules $o->{auto_probe_pci}
-	(that way no pci probe the second time)
-
-2000-02-10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* heavy modification of build_archive and extract_archive to manage
-	a TOC directly in archive file, handle bzip2 or gzip compression,
-	extract_archive can extract multiple files a time, with minimal
-	invocation of uncompress program and follow symlink and expand
-	directory contents.
-	* use build_archive/extract_archive for locales.
-	* fixed a min/max in install_steps_gtk for Resize/Create partition.
-	* fixed adjustEnd with dos partition table, take care of magic 63
-	sectors at beginning of partitions, a more solid method should be
-	used for that.
-
-2000-02-10  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_thiskind): skip modules "unknown" and "ignore"
-
-2000-02-09  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (add): cdie if maximum number of partitions
-	handled by linux is reached
-
-	* Xconfigurator.pm (chooseResolutionsGtk): display the graphic
-	card or server found
-
-	* install_any.pm (relGetFile): for mdkinst files, take care not to
-	have a double '/' (see debbugs #591)
-
-	* install_steps_interactive.pm (configureNetwork):
-	purpose: add ability to configure both modem and lan
-	         clean up the behaviour
-
-	* fs.pm (write_fstab): 
-	purpose: sort the fstab per mount point (cuz /usr must be before /usr/local)
-	also: rewrite of the part writing the fstab. 
diff --git a/perl-install/Makefile b/perl-install/Makefile
deleted file mode 100644
index 1cbeb8133..000000000
--- a/perl-install/Makefile
+++ /dev/null
@@ -1,230 +0,0 @@
-PACKAGE=drakxtools
-PKGVERSION:=$(shell rpm -q --qf '%{VERSION}\n' --specfile $(PACKAGE).spec|head -1)
-RELEASE:=$(shell rpm -q --qf '%{RELEASE}\n' --specfile $(PACKAGE).spec|head -1)
-TAG := $(shell echo "V$(PKGVERSION)_$(RELEASE)" | tr -- '-.' '__')
-
-include Makefile.config
-
-POFILES   = $(shell ls share/po/*.po)
-MOFILES   = $(POFILES:%.po=%.mo)
-DISTFILES = Makefile Makefile.config Newt apps.net_monitor diskdrake c ddcprobe drakxtools.spec pam.net_monitor serial_probe share/po sbus_probing resize_fat share/diskdrake.rc $(STANDALONEPMS) standalone/icons pixmaps network standalone/interactive_http rpcinfo-flushed.c *.pm security harddrake
-OTHERS     = $(OTHERDIRS) $(OTHERFILES)
-OTHERDIRS  = tools/ddcprobe tools/serial_probe
-OTHERFILES = tools/rpcinfo-flushed.c
-
-.PHONY: all $(DIRS) install clean stage2 full_stage2 verify_c 
-
-all: TAGS $(DIRS)
-
-TAGS: $(ALLPMS)
-	etags -o - $^ /usr/lib/perl5/site_perl/*/MDK/Common/*.pm | ./perl2etags > $@
-
-clean:
-	for i in $(DIRS) share/po; do $(MAKE) -C $$i clean; done
-	rm -rf auto ../drakxtools.tar.bz2
-	find . -name "*~" -o -name ".#*" -o -name "TAGS" -o -name "*.old" | xargs rm -f
-
-check:
-	$(MAKE) -C share/po check
-	perl -I. -Mlang -e 'lang::check'
-	perl -I. -Mkeyboard -e 'keyboard::check'
-
-localcopy: clean
-	rm -rf standalone/pixmaps
-	$(MAKE) -C ../tools clean
-	cd .. ; rm -rf $(PACKAGE)-$(PKGVERSION) ; cp -af perl-install $(PACKAGE)-$(PKGVERSION) ; cp -af $(OTHERS) $(PACKAGE)-$(PKGVERSION)
-
-$(DIRS):
-	install -d auto
-	$(MAKE) -C $@
-
-test_pms: verify_c
-	for i in install2 install_steps_*.pm standalone/keyboarddrake standalone/XFdrake standalone/drakboot; do perl_checker -I. -no_cw -excludec -excludehelp -excluderesize_fat::c_rewritten -excludeMDK::Common::Globals -excludeCGI -excludestandalone -excludeurpm $$i; done
-	for i in install2 install_steps_*.pm; do perl -cw -I. $$i; done
-
-verify_c:
-	./verify_c $(ALLPMS)
-
-%.mo: %.po
-	msgfmt -o $@ $<
-
-install_pms: $(DIRS)
-	for i in `perl -ne 's/sub (\w+?)_? {.*/$$1/ and print' commands.pm` sync; do ln -sf commands $(DEST)/usr/bin/$$i; done
-
-	install -d $(DESTREP4PMS)
-	for i in $(PMS); do \
-		dest=$(DESTREP4PMS)/`dirname $$i`; \
-		install -d $$dest; \
-		perl -ne 'print' $$i > $(DESTREP4PMS)/$$i; \
-		perl -pe 's/#[-+].*//; $$_ = "\n" if (/^=head/ .. /^=cut/) || /use (diagnostics|vars|strict)/' $$i > $(DESTREP4PMS)/$$i; \
-	done
-	if [ "x$(PERL_INSTALL_DEBUG)" == "x" ]; then \
-		perl -pi -e 's|#!/usr/bin/perl -d.*\n|#!/usr/bin/perl\n|' $(DESTREP4PMS)/install2; \
-	else \
-		perl -pe 's|#!/usr/bin/perl.*\n|#!/usr/bin/perl -d \n|' install2 > $(DESTREP4PMS)/install2; \
-	fi \
-
-	rm -f $(DESTREP4PMS)/{bootlook,tinyfirewall}.pm
-
-	cp share/*.rc $(DESTREP4PMS)
-	chmod a+x $(DESTREP4PMS)/install2
-	chmod a+x $(DESTREP4PMS)/commands
-	chmod a+x $(DESTREP4PMS)/g_auto_install
-	chmod a+x $(DESTREP4PMS)/live_install*
-
-get_needed_files: $(DIRS) $(MOFILES)
-	$(MAKE) -C share
-
-#	export PERL_INSTALL_TEST=1 ; strace -f -e trace=file -o '| grep -v "(No such file or directory)" | sed -e "s/[^\"]*\"//" -e "s/\".*//" | grep "^/" | grep -v -e "^/tmp" -e "^/home" -e "^/proc" -e "^/var" -e "^/dev" -e "^/etc" -e "^/usr/lib/rpm" > /tmp/list ' $(PERL) -d install2 < /dev/null
-	eval `perl -V:version`; \
-	cat share/list `../tools/specific_arch share/list` | \
-	perl -pe "s/ARCH/$(ARCH)/g" | perl -pe "s/PERL_VERSION/$$version/g" > /tmp/list
-
-	@missing=`perl -lne 'print if !-e $$_' /tmp/list`; [ -z "$$missing" ] || { echo "missing files vvvvvvvvvvvvvvvvvvvvvvvvvv" ; echo "$$missing" ; echo "missing files ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^" ; exit 1; }
-
-	find auto -follow -name "*.so" >> /tmp/list
-
-	for i in $(LOCALFILES) `cat /tmp/list` ; do \
-		ldd $$i 2>/dev/null | grep "=>" | perl -pe 's/.*=> //; s/ .*//; s,^/lib/.*?/,/lib/,' | sort | uniq >> /tmp/list; \
-	done
-
-	perl -Mlang -I. -e 'print "$$_\n" foreach lang::console_font_files()' >> /tmp/list
-
-	install -d $(DEST)/etc
-	install -d $(DEST)/etc/sysconfig/network-scripts
-	install -d $(DEST)/lib
-	install -d $(DEST)/bin
-	install -d $(DEST)/usr/bin
-	install -d $(DEST)/usr/lib
-	install -d $(DEST)/usr/share
-	install -d $(DEST)/usr/share/gtk
-	install -d $(DEST)/usr/share/xmodmap
-	install -d $(DEST)/usr/X11R6/lib/X11
-	install -d $(ROOTDEST)/Mandrake/base
-	install -s $(LOCALFILES) $(DEST)/usr/bin
-#	cp -f $(LOCALFILES2) $(DEST)/usr/bin
-	ln -s ../X11R6/lib/X11 $(DEST)/usr/lib/X11
-ifeq (sparc,$(ARCH))
-	cp -a /usr/X11R6/lib/X11/xkb $(DEST)/usr/X11R6/lib/X11
-	rm -f $(DEST)/usr/X11R6/lib/X11/xkb/compiled
-	ln -s /tmp $(DEST)/usr/X11R6/lib/X11/xkb/compiled
-	ln -s /usr/X11R6/lib/X11/xkb/xkbcomp $(DEST)/usr/bin/xkbcomp
-endif
-ifeq (i386,$(ARCH))
-	install -s /sbin/cardmgr $(DEST)/usr/bin
-endif
-
-	for i in `cat /tmp/list`; do \
-	    if (echo $$i | grep -q "lib/[^/]*\.so"); then \
-	      install -s $$i $(DEST)/lib; \
-	    else \
-	      d=$$i; \
-	      (echo $$d | grep -q "^[^/]") && d="$(REP4PMS)/$$d"; \
-	      d=`echo $(DEST)/$$d | sed 's/\/usr\/local\//\/usr\//'`; \
-	      install -d `dirname $$d` && \
-	      if (echo $$i | grep -q "\.pm"); then \
-	    	 perl -pe '$$_ =~ /^__END__/ and exit(0);' $$i > $$d; \
-	      elif (echo $$i | grep -q "\.so"); then \
-	    	      install -s $$i $$d; \
-	      else \
-	    	      cp -f $$i $$d; \
-	      fi; \
-	    fi; \
-	done
-	mv -f $(DEST)/lib/libimlib-png.so $(DEST)/usr/lib
-
-#	# transform xpm's in png's
-	for i in $(DEST)/usr/share/icons/*.xpm; do convert $$i $${i%xpm}png; rm $$i; done
-
-	mv -f $(DEST)/bin/* $(DEST)/sbin/* $(DEST)/usr/bin
-	cd $(DEST)/usr/bin ; mv insmod insmod_
-	rmdir $(DEST)/bin $(DEST)/sbin
-
-	perl -ane 'symlink "$$F[1]", "$(DEST)/usr/bin/$$F[0]"' share/aliases
-
-ifeq (i386,$(ARCH))
-	cp ../tools/i386/busybox $(DEST)/usr/bin
-endif
-	ln -sf ash $(DEST)/usr/bin/sh
-
-	for i in fonts keyboards locales keymaps; do tar xfj `../tools/specific_arch share/$$i.tar.bz2` -C $(DEST); done
-
-	grep ChangeLog CVS/Entries > $(DEST)/usr/share/VERSION
-
-	gzip -9f $(DEST)/usr/share/ldetect-lst/*
-
-	cd share ; cp -a modparm.lst $(DEST)/usr/share
-	cd share ; cp -a consolefonts $(DEST)/usr/share
-	-cd share ; cp -f *.png *.xpm $(DEST)/usr/share
-	-cd pixmaps ; cp -f *.png *.xpm $(DEST)/usr/share ; rm -f $(DEST)/usr/share/wiz_*
-	cd share ; cp -a themes $(DEST)/usr/share/gtk
-	cd share ; cp compssUsers compssUsers.* rpmsrate $(ROOTDEST)/Mandrake/base
-
-	clean-rpmsrate $(ROOTDEST)/Mandrake/base/rpmsrate $(ROOTDEST)/Mandrake/RPMS*
-
-	for i in ../kernel/modules.description ../kernel/all.modules/modules.cz*; do cp -f $$i $(DEST)/lib/; done
-
-	$(MAKE) -C share/po install NAME=libDrakX LOCALEDIR=$(DEST)/usr/share/locale_special
-
-#	echo -e '#!/bin/sh\n\nexec "/usr/bin/sh"' > $(DEST)/usr/bin/runinstall2
-#	chmod a+x $(DEST)/usr/bin/runinstall2
-
-ifeq (i386,$(ARCH))
-	cp -a /etc/pcmcia $(DEST)/etc
-	../tools/patch_pcmcia_config.pl $(DEST)/etc/pcmcia/config ../kernel/all.modules/`cat ../kernel/all.kernels/.main`/modules.dep
-endif
-
-	find $(DEST) -name CVS | xargs rm -rf
-
-full_stage2:
-	if [ `id -u` = 0 ]; then rm -rf $(DEST); else $(SUDO) rm -rf $(DEST); fi
-	mkdir -p $(DEST)
-	$(MAKE) get_needed_files 
-	$(MAKE) stage2
-
-stage2:
-	$(MAKE) install_pms
-	$(ROOTDEST)/misc/make_mdkinst_stage2 $(DEST) $(ROOTDEST)/Mandrake/base/mdkinst_stage2
-
-# rules to build a test rpm
-
-localrpm: localdist buildrpm
-
-localsrpm: localdist buildsrpm
-
-localdist: cleandist localcopy tar
-
-cleandist:
-	rm -rf ../$(PACKAGE)-$(PKGVERSION) ../$(PACKAGE)-$(PKGVERSION).tar.bz2
-
-tar:
-	cd ../$(PACKAGE)-$(PKGVERSION) && perl -pi -e 's/^C_RPM.*/C_RPM=0/; s/^C_DRAKX.*/C_DRAKX=0/' c/Makefile
-	cd ../$(PACKAGE)-$(PKGVERSION) && perl -pi -e 's/^all: help/all:/' share/po/Makefile
-	cd ../$(PACKAGE)-$(PKGVERSION) && rm -rf install* pkgs.pm help.pm ftp.pm http.pm crypto.pm t.pm debug.log `find -name CVS`
-	cd ../$(PACKAGE)-$(PKGVERSION) && mv -f Makefile.drakxtools Makefile
-	cd ../$(PACKAGE)-$(PKGVERSION) && rm -f list_modules.pm && cp -f ../kernel/list_modules.pm .
-	cd ..; tar cfj $(PACKAGE)-$(PKGVERSION).tar.bz2 $(patsubst %,$(PACKAGE)-$(PKGVERSION)/%,$(DISTFILES))
-	cd ..; rm -rf $(PACKAGE)-$(PKGVERSION)
-
-buildrpm:
-	rpm -ta ../$(PACKAGE)-$(PKGVERSION).tar.bz2
-
-buildsrpm:
-	rpm -ts ../$(PACKAGE)-$(PKGVERSION).tar.bz2
-
-# rules to build a distributable rpm
-
-rpm: cvstag dist buildrpm
-
-srpm: cvstag dist buildsrpm
-
-dist: cleandist export tar
-
-export:
-	cd ..; cvs export -d $(PACKAGE)-$(PKGVERSION) -r $(TAG) $(PACKAGE)
-	cd ../$(PACKAGE)-$(PKGVERSION) && rm -rf $(OTHERDIRS) && set -x && for f in $(OTHERDIRS); do cvs -d `cat ../CVS/Root` export -r $(TAG) -d `basename $$f` gi/$$f; done
-	cd ..; set -x && for f in $(OTHERFILES); do cvs -d `cat ../CVS/Root` export -r $(TAG) -d $(PACKAGE)-$(PKGVERSION) gi/$$f; done
-
-cvstag:
-	cvs tag $(CVSTAGOPT) $(TAG)
-	cd ..; cvs tag $(CVSTAGOPT) $(TAG) $(OTHERS)
diff --git a/perl-install/Makefile.config b/perl-install/Makefile.config
deleted file mode 100644
index f3f3deb68..000000000
--- a/perl-install/Makefile.config
+++ /dev/null
@@ -1,23 +0,0 @@
-# -*- Makefile -*-
-ARCH := $(patsubst i%86,i386,$(shell uname -m))
-ARCH := $(patsubst sparc%,sparc,$(ARCH))
-
-VERSION     = 2.2.10-BOOT                                                                             
-SUDO        = sudo
-SO_FILES    = c/blib/arch/auto/c/c.so                                                                 
-PMS         = *.pm Newt/*.pm c/stuff.pm resize_fat/*.pm sbus_probing/*.pm network/*.pm diskdrake/*.pm harddrake/*.pm commands install2 g_auto_install live_install live_install2 share/advertising/*.pl
-STANDALONEPMS_ = diskdrake XFdrake mousedrake printerdrake logdrake keyboarddrake draknet drakbackup drakfont drakproxy localedrake net_monitor drakbug_report tinyfirewall drakxconf drakxservices draksec drakboot adduserdrake drakgw drakautoinst livedrake lsnetdrake scannerdrake fileshareset drakxtv drakfloppy harddrake2 drakTermServ service_harddrake
-STANDALONEPMS = $(STANDALONEPMS_:%=standalone/%)
-ALLPMS	    = $(PMS) $(STANDALONEPMS)
-REP4PMS     = /usr/bin/perl-install
-ROOTDEST    = /export
-DEST        = $(ROOTDEST)/Mandrake/mdkinst
-STAGE2      = $(ROOTDEST)/Mandrake/base/mdkinst_stage2
-BASE        = $(ROOTDEST)/Mandrake/base
-DESTREP4PMS = $(DEST)$(REP4PMS)
-PERL        = perl
-LOCALFILES  = $(patsubst %, ../tools/%,ddcprobe/ddcxinfos aewm-drakx/aewm-drakx serial_probe/serial_probe xhost+)
-DIRS        = c Newt resize_fat #po 
-CFLAGS	    = -Wall
-override CFLAGS  += -pipe
-
diff --git a/perl-install/Makefile.drakxtools b/perl-install/Makefile.drakxtools
deleted file mode 100644
index b7a9ce831..000000000
--- a/perl-install/Makefile.drakxtools
+++ /dev/null
@@ -1,62 +0,0 @@
-# -*- Makefile -*-
-include Makefile.config
-
-INLIBDEST_DIRS = Newt c resize_fat sbus_probing 
-HAVEINST_DIRS = share/po standalone/interactive_http
-DIRS = $(INLIBDEST_DIRS) $(HAVEINST_DIRS) ddcprobe serial_probe
-NAME = libDrakX
-PREFIX = 
-LIBDIR = $(PREFIX)/usr/lib
-DATADIR = $(PREFIX)/usr/share
-BINDEST = $(PREFIX)/usr/bin
-SBINDEST = $(PREFIX)/usr/sbin
-ETCDEST = $(PREFIX)/etc/gtk
-BINX11DEST = $(PREFIX)/usr/X11R6/bin
-LIBX11DEST = $(PREFIX)/usr/X11R6/lib/X11
-LIBDEST = $(LIBDIR)/$(NAME)
-NETLIBDEST = $(LIBDIR)/$(NAME)/network
-SECURITYDEST = $(LIBDIR)/$(NAME)/security
-PIXDIR = $(DATADIR)/$(NAME)/pixmaps
-.PHONY: $(DIRS)
-
-all: rpcinfo-flushed $(DIRS)
-
-$(DIRS):
-	install -d auto
-	rm -f share/po/DrakX.pot # force rebuild of po's
-	[ ! -e $@/Makefile ] || $(MAKE) -C $@
-
-install:
-	install -d $(BINDEST) $(ETCDEST) $(SBINDEST) $(DATADIR) $(LIBDEST) $(NETLIBDEST) $(BINX11DEST) $(LIBX11DEST) $(PIXDIR) $(SECURITYDEST)
-	install -d $(INLIBDEST_DIRS:%=$(LIBDEST)/%)
-	install $(STANDALONEPMS) $(SBINDEST)
-	install -s rpcinfo-flushed ddcprobe/ddcxinfos serial_probe/serial_probe $(SBINDEST)
-	ln -s ../../$(patsubst $(PREFIX)/usr%,%,$(SBINDEST))/XFdrake $(BINX11DEST)/Xdrakres
-	ln -s fileshareset $(SBINDEST)/filesharelist
-	mv -f $(SBINDEST)/lsnetdrake $(BINDEST)/lsnetdrake
-
-	install -m 644 *.pm $(LIBDEST)
-	install -m 644 network/*.pm $(NETLIBDEST)
-	install -m 644 security/*.pm $(SECURITYDEST)
-	install -m 644 pixmaps/* $(PIXDIR)
-	install -m 644 share/diskdrake.rc $(DATADIR)/$(NAME)
-
-	install -d $(PREFIX)/etc/security
-	echo 'RESTRICT=yes' > $(PREFIX)/etc/security/fileshare.conf
-
-	install -m 644 $(patsubst %,Newt/%.pm,Newt) $(LIBDEST)/Newt
-	install -m 644 $(patsubst %,c/%.pm,stuff) $(LIBDEST)/c
-	install -m 644 $(patsubst %,sbus_probing/%.pm,main) $(LIBDEST)/sbus_probing
-	install -m 644 $(patsubst %,resize_fat/%.pm,main any boot_sector c_rewritten dir_entry directory fat info_sector io) $(LIBDEST)/resize_fat
-
-	install -d $(LIBDEST)/diskdrake
-	install -m 644 diskdrake/*.pm $(LIBDEST)/diskdrake
-
-	find $(LIBDEST) -name "*.pm" | xargs perl -pi -e '$$_ = "\n" if /\s*use\s+(diagnostics|vars|strict)/'
-
-	for i in $(HAVEINST_DIRS); do \
-		$(MAKE) -C $$i install PREFIX=$(PREFIX) DATADIR=$(DATADIR) NAME=$(NAME) ; \
-	done
-
-	find auto -follow -name .exists -o -name "*.bs" | xargs rm -f
-	cp -rfL auto standalone/icons $(LIBDEST)
diff --git a/perl-install/Newt/.cvsignore b/perl-install/Newt/.cvsignore
deleted file mode 100644
index c296b7faf..000000000
--- a/perl-install/Newt/.cvsignore
+++ /dev/null
@@ -1,6 +0,0 @@
-Newt.bs
-Newt.c
-pm_to_blib
-blib
-Makefile
-Makefile_c
diff --git a/perl-install/Newt/Av_CharPtrPtr.c b/perl-install/Newt/Av_CharPtrPtr.c
deleted file mode 100644
index f28fa6315..000000000
--- a/perl-install/Newt/Av_CharPtrPtr.c
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifdef __cplusplus
-extern "C" {
-#endif
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-#include "Av_CharPtrPtr.h"  /* XS_*_charPtrPtr() */
-#ifdef __cplusplus
-}
-#endif
-
-
-/* Used by the INPUT typemap for char**.
- * Will convert a Perl AV* (containing strings) to a C char**.
- */
-char **
-XS_unpack_charPtrPtr( rv )
-SV *rv;
-{
-	AV *av;
-	SV **ssv;
-	char **s;
-	int avlen;
-	int x;
-
-	if( SvROK( rv ) && (SvTYPE(SvRV(rv)) == SVt_PVAV) )
-		av = (AV*)SvRV(rv);
-	else {
-		warn("XS_unpack_charPtrPtr: rv was not an AV ref");
-		return( (char**)NULL );
-	}
-
-	/* is it empty? */
-	avlen = av_len(av);
-	if( avlen < 0 ){
-		warn("XS_unpack_charPtrPtr: array was empty");
-		return( (char**)NULL );
-	}
-
-	/* av_len+2 == number of strings, plus 1 for an end-of-array sentinel.
-	 */
-	s = (char **)safemalloc( sizeof(char*) * (avlen + 2) );
-	if( s == NULL ){
-		warn("XS_unpack_charPtrPtr: unable to malloc char**");
-		return( (char**)NULL );
-	}
-	for( x = 0; x <= avlen; ++x ){
-		ssv = av_fetch( av, x, 0 );
-		if( ssv != NULL ){
-			if( SvPOK( *ssv ) ){
-				s[x] = (char *)safemalloc( SvCUR(*ssv) + 1 );
-				if( s[x] == NULL )
-					warn("XS_unpack_charPtrPtr: unable to malloc char*");
-				else
-					strcpy( s[x], SvPV( *ssv, PL_na ) );
-			}
-			else
-				warn("XS_unpack_charPtrPtr: array elem %d was not a string.", x );
-		}
-		else
-			s[x] = (char*)NULL;
-	}
-	s[x] = (char*)NULL; /* sentinel */
-	return( s );
-}
-
-/* Used by the OUTPUT typemap for char**.
- * Will convert a C char** to a Perl AV*.
- */
-void
-XS_pack_charPtrPtr( st, s )
-SV *st;
-char **s;
-{
-	AV *av = newAV();
-	SV *sv;
-	char **c;
-
-	for( c = s; *c != NULL; ++c ){
-		sv = newSVpv( *c, 0 );
-		av_push( av, sv );
-	}
-	sv = newSVrv( st, NULL );	/* upgrade stack SV to an RV */
-	SvREFCNT_dec( sv );	/* discard */
-	SvRV( st ) = (SV*)av;	/* make stack RV point at our AV */
-}
-
-
-/* cleanup the temporary char** from XS_unpack_charPtrPtr */
-void
-XS_release_charPtrPtr(s)
-char **s;
-{
-	char **c;
-	for( c = s; *c != NULL; ++c )
-		safefree( *c );
-	safefree( s );
-}
-
diff --git a/perl-install/Newt/Av_CharPtrPtr.h b/perl-install/Newt/Av_CharPtrPtr.h
deleted file mode 100644
index 765f1a731..000000000
--- a/perl-install/Newt/Av_CharPtrPtr.h
+++ /dev/null
@@ -1,4 +0,0 @@
-char ** XS_unpack_charPtrPtr _(( SV *rv ));
-void XS_pack_charPtrPtr _(( SV *st, char **s ));
-void XS_release_charPtrPtr _(( char **s ));
-
diff --git a/perl-install/Newt/Makefile b/perl-install/Newt/Makefile
deleted file mode 100644
index cb80c5ab7..000000000
--- a/perl-install/Newt/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-.PHONY: clean
-
-Newt: %: %.xs
-	test -e Makefile_c || perl Makefile.PL
-	$(MAKE) -f Makefile_c LD_RUN_PATH=
-	rm -f ../auto/Newt ; ln -s ../Newt/blib/arch/auto/Newt ../auto
-
-clean:
-	test ! -e Makefile_c || $(MAKE) -f Makefile_c clean
-	rm -f *~ *.o
diff --git a/perl-install/Newt/Makefile.PL b/perl-install/Newt/Makefile.PL
deleted file mode 100644
index 6378a8f31..000000000
--- a/perl-install/Newt/Makefile.PL
+++ /dev/null
@@ -1,13 +0,0 @@
-use ExtUtils::MakeMaker;
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-
-WriteMakefile(
-    'NAME'	=> 'Newt',
-    'OBJECT'    => 'Av_CharPtrPtr.o Newt.o',
-    'MAKEFILE'  => 'Makefile_c',
-    'OPTIMIZE'  => '-Os',
-    'VERSION_FROM' => 'Newt.pm', # finds $VERSION
-    'LIBS'	=> ['-lnewt -lslang'],
-    'DEFINE'	=> '',     # e.g., '-DHAVE_SOMETHING' 
-);
diff --git a/perl-install/Newt/Newt.pm b/perl-install/Newt/Newt.pm
deleted file mode 100644
index fdf9c0232..000000000
--- a/perl-install/Newt/Newt.pm
+++ /dev/null
@@ -1,16 +0,0 @@
-package Newt; # $Id$
-
-use strict;
-use vars qw($VERSION @ISA);
-use DynaLoader;
-
-use vars qw($VERSION @ISA);
-@ISA = qw(DynaLoader);
-$VERSION = '0.01';
-bootstrap Newt $VERSION;
-
-package Newt::Component; # $Id$
-package Newt::Grid; # $Id$
-
-
-1;
diff --git a/perl-install/Newt/Newt.xs b/perl-install/Newt/Newt.xs
deleted file mode 100644
index fba7c5455..000000000
--- a/perl-install/Newt/Newt.xs
+++ /dev/null
@@ -1,478 +0,0 @@
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-#include <newt.h>
-
-static void suspend() {
-  newtSuspend();
-  raise(SIGTSTP);
-  newtResume();
-}
-
-static void componentCallback(newtComponent co, void *data) {
-  dSP;
-  PUSHMARK(SP);
-  perl_call_sv((SV *) data, G_DISCARD);
-}
-
-
-typedef newtComponent Newt__Component;
-typedef newtGrid Newt__Grid;
-
-
-MODULE = Newt		PACKAGE = Newt 	PREFIX = newt
-
-void
-DESTROY()
-	CODE:
-	{
-		newtFinished();
-	}
-
-int
-newtInit()
-
-int
-newtFinished()
-
-void
-newtCls()
-
-void
-newtSuspend()
-
-void
-newtResume()
-
-int
-newtCenteredWindow(width,height,title)
-	int width;
-	int height;
-	const char * title;
-
-void
-newtPopWindow()
-
-void
-newtRefresh()
-
-void
-newtPushHelpLine(text)
-	const char * text;
-
-void
-newtDrawRootText(row,col,text)
-	int row;
-	int col;
-	const char * text;
-
-void
-newtGetScreenSize()
-  PPCODE:
-{
-  int cols, rows;
-  newtGetScreenSize(&cols, &rows);
-  PUSHs(sv_2mortal(newSViv(cols)));
-  PUSHs(sv_2mortal(newSViv(rows)));
-}
-
-void
-newtSetSuspendCallback()
-	CODE:
-	{
-	  newtSetSuspendCallback(suspend, NULL);
-	}
-
-
-void
-newtWinMessage(title,buttonText,text)
-	char * title;
-	char * buttonText;
-	char * text;
-
-int
-newtWinChoice(title,button1,button2,text)
-	char * title;
-	char * button1;
-	char * button2;
-	char * text;
-
-int
-newtWinTernary(title,button1,button2,button3,message)
-	char * title;
-	char * button1;
-	char * button2;
-	char * button3;
-	char * message;
-
-void
-newtWinMenu(title,text,suggestedWidth,flexDown,flexUp,maxListHeight,list,def,buttons, ...)
-	char * title;
-	char * text;
-	int suggestedWidth;
-	int flexDown;
-	int flexUp;
-	int maxListHeight;
-	char **list;
-	int def;
-	char *buttons;
-        PPCODE:
-	{
-	  int button;
-#define nb 8
-#define a(i) SvPV(ST(i + nb),PL_na)
-	  button = newtWinMenu(title, text, suggestedWidth, flexDown, flexUp, maxListHeight, list, &def,
-			       items > nb +  0 ? a( 0) : NULL,
-			       items > nb +  1 ? a( 1) : NULL,
-			       items > nb +  2 ? a( 2) : NULL,
-			       items > nb +  3 ? a( 3) : NULL,
-			       items > nb +  4 ? a( 4) : NULL,
-			       items > nb +  5 ? a( 5) : NULL,
-			       items > nb +  6 ? a( 6) : NULL,
-			       items > nb +  7 ? a( 7) : NULL,
-			       items > nb +  8 ? a( 8) : NULL,
-			       items > nb +  9 ? a( 9) : NULL,
-			       items > nb + 10 ? a(10) : NULL, 
-			       NULL);
-#undef a
-	  EXTEND(SP, 2);
- 	  PUSHs(sv_2mortal(newSViv(button)));
- 	  PUSHs(sv_2mortal(newSViv(def)));
-	}
-
-MODULE = Newt		PACKAGE = Newt::Component 	PREFIX = newt
-
-void
-addCallback(co, callback)
-  Newt::Component co;
-  SV *callback;
-  CODE:
-  newtComponentAddCallback(co, componentCallback, callback);
-
-Newt::Component
-newtCompactButton(left,top,text)
-	int left;
-	int top;
-	const char * text;
-
-Newt::Component
-newtButton(left,top,text)
-	int left;
-	int top;
-	const char * text;
-
-Newt::Component
-newtCheckbox(left,top,text,defValue,seq)
-	int left;
-	int top;
-	const char * text;
-	char *defValue;
-	const char * seq;
-  CODE: 
-  RETVAL = newtCheckbox(left, top, text, defValue[0], seq, NULL);
-  OUTPUT:
-  RETVAL
-
-int
-newtCheckboxGetValue(co)
-	Newt::Component co;
-
-void
-newtCheckboxSetValue(co, value)
-	Newt::Component co;
-	char *value;
-  CODE: 
-  newtCheckboxSetValue(co, value[0]);
-
-Newt::Component
-newtLabel(left,top,text)
-	int left;
-	int top;
-	const char * text;
-
-void
-newtLabelSetText(co,text)
-	Newt::Component co;
-	const char * text;
-
-Newt::Component
-newtVerticalScrollbar(left,top,height,normalColorset,thumbColorset)
-	int left;
-	int top;
-	int height;
-	int normalColorset;
-	int thumbColorset;
-
-void
-newtScrollbarSet(co,where,total)
-	Newt::Component co;
-	int where;
-	int total;
-
-Newt::Component
-newtListbox(left,top,height,flags)
-	int left;
-	int top;
-	int height;
-	int flags;
-
-SV *
-newtListboxGetCurrent(co)
-	Newt::Component co;
-CODE:
-        RETVAL = SvREFCNT_inc(newtListboxGetCurrent(co));
-OUTPUT:
-	RETVAL
-
-
-void
-newtListboxSetCurrent(co,indice)
-	Newt::Component co;
-	int indice;
-
-void
-newtListboxSetWidth(co,width)
-	Newt::Component co;
-	int width;
-
-int
-newtListboxAddEntry(co,text,data)
-	Newt::Component co;
-	const char * text;
-	SV * data;
-CODE:
-	RETVAL = newtListboxAddEntry(co, text, data);
-OUTPUT:
-	RETVAL
-
-Newt::Component
-newtTextboxReflowed(left,top,text,width,flexDown,flexUp,flags)
-	int left;
-	int top;
-	char * text;
-	int width;
-	int flexDown;
-	int flexUp;
-	int flags;
-
-Newt::Component
-newtTextbox(left,top,width,height,flags)
-	int left;
-	int top;
-	int width;
-	int height;
-	int flags;
-
-void
-newtTextboxSetText(co,text)
-	Newt::Component co;
-	const char * text;
-
-void
-newtTextboxSetHeight(co,height)
-	Newt::Component co;
-	int height;
-
-int
-newtTextboxGetNumLines(co)
-	Newt::Component co;
-
-char *
-newtReflowText(text,width,flexDown,flexUp,actualWidth,actualHeight)
-	char * text;
-	int width;
-	int flexDown;
-	int flexUp;
-	int * actualWidth;
-	int * actualHeight;
-
-Newt::Component
-newtForm(vertBar,help,flags)
-	Newt::Component vertBar;
-	const char * help;
-	int flags;
-
-void
-newtFormSetSize(co)
-	Newt::Component co;
-
-Newt::Component
-newtFormGetCurrent(co)
-	Newt::Component co;
-
-void
-newtFormSetBackground(co,color)
-	Newt::Component co;
-	int color;
-
-void
-newtFormSetCurrent(co,subco)
-	Newt::Component co;
-	Newt::Component subco;
-
-void
-newtFormAddComponent(form,co)
-	Newt::Component form;
-	Newt::Component co;
-
-void
-newtFormAddGrid(form,grid,recurse)
-	Newt::Component form;
-	Newt::Grid grid;
-        int recurse;
-  CODE:
-  newtGridAddComponentsToForm(grid,form,recurse);
-
-void
-newtFormSetHeight(co,height)
-	Newt::Component co;
-	int height;
-
-void
-newtFormSetWidth(co,width)
-	Newt::Component co;
-	int width;
-
-Newt::Component
-newtRunForm(form)
-	Newt::Component form;
-
-void
-newtDrawForm(form)
-	Newt::Component form;
-
-Newt::Component
-newtEntry(left,top,initialValue,width,flag)
-	int left;
-	int top;
-	const char * initialValue;
-	int width;
-        int flag;
-	CODE:
-	{
-		char *result;
-		RETVAL = newtEntry(left,top,initialValue,width,&result,flag);
-	}
-	OUTPUT:
-	RETVAL
-
-void
-newtEntrySet(co,value,cursorAtEnd)
-	Newt::Component co;
-	const char * value;
-	int cursorAtEnd;
-
-char *
-newtEntryGetValue(co)
-	Newt::Component co;
-
-void
-newtFormDestroy(form)
-	Newt::Component form;
-
-MODULE = Newt		PACKAGE = Newt::Grid 	PREFIX = newt
-
-Newt::Grid
-newtCreateGrid(cols,rows)
-	int cols;
-	int rows;
-
-Newt::Grid
-HCloseStacked(first, ...)
-	Newt::Component first;
-     CODE:
-	{
-	  int i;
-	  newtComponent *p = alloca(sizeof(newtComponent) * (2 * items + 1));
-	  for (i = 0; i < items; i++) {
-	    p[2 * i] = 1;
-	    p[2 * i + 1] = (newtComponent)SvIV((SV*)SvRV( ST(i) ));
-	  }
-	  p[2 * items] = NULL;
-          RETVAL = ((newtGrid (*)()) newtGridHCloseStacked)();
-	}
-OUTPUT:
-RETVAL
-
-
-Newt::Grid
-newtGridBasicWindow(text,middle,buttons)
-	Newt::Component text;
-	Newt::Grid middle;
-	Newt::Grid buttons;
-
-
-Newt::Grid
-newtGridSimpleWindow(text,middle,buttons)
-	Newt::Component text;
-	Newt::Component middle;
-	Newt::Grid buttons;
-
-void
-newtGridSetField(grid,col,row,type,val,padLeft,padTop,padRight,padBottom,anchor,flags)
-	Newt::Grid grid;
-	int col;
-	int row;
-	enum newtGridElement type;
-	void * val;
-	int padLeft;
-	int padTop;
-	int padRight;
-	int padBottom;
-	int anchor;
-	int flags;
-
-
-void
-newtGridFree(grid,recurse)
-	Newt::Grid grid;
-	int recurse;
-
-void
-newtGridPlace(grid,left,top)
-	Newt::Grid grid;
-        int left;
-        int top;
-
-void
-newtGridGetSize(grid)
-	Newt::Grid grid;
- PPCODE:
-{
-  int width;
-  int height;
-  newtGridGetSize(grid, &width, &height);
-  PUSHs(sv_2mortal(newSViv(width)));
-  PUSHs(sv_2mortal(newSViv(height)));
-}
-
-void
-newtGridWrappedWindow(grid,title)
-	Newt::Grid grid;
-	char * title;
-	
-Newt::Grid
-newtButtonBar(button1, ...)
-	char * button1;
- PPCODE:
-	{
-	  static newtComponent p[11];
-	  int i;
-	  EXTEND(SP, items + 1);
-#define a(i) (char *)SvPV(ST(i),PL_na)
-          PUSHs(sv_setref_pv(sv_newmortal(), "Newt::Grid", 
-	     newtButtonBar(items >  0 ? a( 0) : NULL, items >  0 ? &p[ 0] : NULL, 
-			   items >  1 ? a( 1) : NULL, items >  1 ? &p[ 1] : NULL, 
-			   items >  2 ? a( 2) : NULL, items >  2 ? &p[ 2] : NULL, 
-			   items >  3 ? a( 3) : NULL, items >  3 ? &p[ 3] : NULL, 
-			   items >  4 ? a( 4) : NULL, items >  4 ? &p[ 4] : NULL, 
-			   items >  5 ? a( 5) : NULL, items >  5 ? &p[ 5] : NULL, 
-			   items >  6 ? a( 6) : NULL, items >  6 ? &p[ 6] : NULL, 
-			   items >  7 ? a( 7) : NULL, items >  7 ? &p[ 7] : NULL, 
-			   items >  8 ? a( 8) : NULL, items >  8 ? &p[ 8] : NULL, 
-			   items >  9 ? a( 9) : NULL, items >  9 ? &p[ 9] : NULL, 
-			   items > 10 ? a(10) : NULL, items > 10 ? &p[10] : NULL,  
-			   NULL)));
-#undef a
-        for (i = 0; i < items; i++) PUSHs(sv_setref_pv(sv_newmortal(), "Newt::Component", p[i]));
-	}
diff --git a/perl-install/Newt/typemap b/perl-install/Newt/typemap
deleted file mode 100644
index 5aaa2f668..000000000
--- a/perl-install/Newt/typemap
+++ /dev/null
@@ -1,25 +0,0 @@
-TYPEMAP
-
-const char *		T_PV
-const void *		T_PV
-int *			T_PV
-void **			T_PACKED
-
-enum newtFlagsSense	T_IV
-enum newtGridElement	T_IV
-SV **			T_SV
-
-Newt::Component		NewtComponent
-Newt::Grid		NewtGrid
-
-INPUT
-NewtComponent
-	$var = ($type) SvIV((SV*)SvRV($arg))
-NewtGrid
-	$var = ($type) SvIV((SV*)SvRV($arg))
-
-OUTPUT
-NewtComponent
-	sv_setref_pv($arg, "Newt::Component", (void*) $var);
-NewtGrid
-	sv_setref_pv($arg, "Newt::Grid", (void*) $var);
diff --git a/perl-install/any.pm b/perl-install/any.pm
deleted file mode 100644
index b8e5e54cc..000000000
--- a/perl-install/any.pm
+++ /dev/null
@@ -1,1179 +0,0 @@
-package any; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use detect_devices;
-use partition_table qw(:types);
-use fsedit;
-use fs;
-use lang;
-use run_program;
-use modules;
-use log;
-use c;
-
-sub drakx_version { 
-    sprintf "DrakX v%s built %s", $::testing ? ('TEST', scalar gmtime()) : (split('/', cat_("$ENV{SHARE_PATH}/VERSION")))[2,3];
-}
-
-sub facesdir {
-    my ($prefix) = @_;
-    "$prefix/usr/share/mdk/faces/";
-}
-sub face2png {
-    my ($face, $prefix) = @_;
-    facesdir($prefix) . $face . ".png";
-}
-sub facesnames {
-    my ($prefix) = @_;
-    my $dir = facesdir($prefix);
-    my @l = grep { /^[A-Z]/ } all($dir);
-    map { if_(/(.*)\.png/, $1) } (@l ? @l : all($dir));
-}
-
-sub addKdmIcon {
-    my ($prefix, $user, $icon) = @_;
-    my $dest = "$prefix/usr/share/faces/$user.png";
-    eval { cp_af(facesdir($prefix) . $icon . ".png", $dest) } if $icon;
-}
-
-sub allocUsers {
-    my ($prefix, $users) = @_;
-    my @m = my @l = facesnames($prefix);
-    foreach (grep { !$_->{icon} || $_->{icon} eq "automagic" } @$users) {
-	$_->{auto_icon} = splice(@m, rand(@m), 1); #- known biased (see cookbook for better)
-	log::l("auto_icon is $_->{auto_icon}");
-	@m = @l unless @m;
-    }
-}
-
-sub addUsers {
-    my ($prefix, $users) = @_;
-    my $msec = "$prefix/etc/security/msec";
-
-    allocUsers($prefix, $users);
-    foreach my $u (@$users) {
-	run_program::rooted($prefix, "usermod", "-G", join(",", @{$u->{groups}}), $u->{name}) if !is_empty_array_ref($u->{groups});
-	addKdmIcon($prefix, $u->{name}, delete $u->{auto_icon} || $u->{icon});
-    }
-}
-
-sub crypt {
-    my ($password, $md5) = @_;
-    crypt($password, $md5 ? '$1$' . salt(8) : salt(2));
-}
-sub enableShadow {
-    my ($prefix) = @_;
-    run_program::rooted($prefix, "pwconv")  or log::l("pwconv failed");
-    run_program::rooted($prefix, "grpconv") or log::l("grpconv failed");
-}
-sub enableMD5Shadow { #- NO MORE USED
-    my ($prefix, $shadow, $md5) = @_;
-    substInFile {
-	if (/^password.*pam_pwdb.so/) {
-	    s/\s*shadow//; s/\s*md5//;
-	    s/$/ shadow/ if $shadow;
-	    s/$/ md5/ if $md5;
-	}
-    } grep { -r $_ } map { "$prefix/etc/pam.d/$_" } qw(login rlogin passwd);
-}
-
-sub grub_installed {
-    my ($in) = @_;
-    my $f = "/usr/sbin/grub";
-    $in->do_pkgs->install('grub') if !-e $f;
-    -e $f;
-}
-
-sub setupBootloader {
-    my ($in, $b, $all_hds, $fstab, $security, $prefix, $more) = @_;
-    my $hds = $all_hds->{hds};
-
-    $more++ if $b->{bootUnsafe};
-    my $automatic = !$::expert && $more < 1;
-    my $semi_auto = !$::expert && arch() !~ /ia64/;
-    my $ask_per_entries = $::expert || $more > 1;
-    my $prev_boot = $b->{boot};
-    my $mixed_kind_of_disks = 
-      (grep { $_->{device} =~ /^sd/ } @$hds) && (grep { $_->{device} =~ /^hd/ } @$hds) ||
-      (grep { $_->{device} =~ /^hd[fghi]/ } @$hds) && (grep { $_->{device} =~ /^hd[abcd]/ } @$hds);
-
-    if ($mixed_kind_of_disks) {
-	$automatic = $semi_auto = 0;
-	#- full expert questions when there is 2 kind of disks
-	#- it would need a semi_auto asking on which drive the bios boots...
-    }
-    $automatic = 0 if arch() =~ /ppc/; #- no auto for PPC yet
-	
-    if ($automatic) {
-	#- automatic
-    } elsif ($semi_auto) {
-	my @l = (__("First sector of drive (MBR)"), __("First sector of boot partition"));
-
-	$in->set_help('setupBootloaderBeginner') unless $::isStandalone;
-	if (arch() =~ /sparc/) {
-	    $b->{use_partition} = $in->ask_from_list_(_("SILO Installation"),
-						      _("Where do you want to install the bootloader?"),
-						      \@l, $l[$b->{use_partition}]) or return 0;
-	} elsif (arch() =~ /ppc/) {
-		if (defined $partition_table_mac::bootstrap_part) {
-			$b->{boot} = $partition_table_mac::bootstrap_part;
-			log::l("set bootstrap to $b->{boot}"); 
-		} else {
-			die "no bootstrap partition - yaboot.conf creation failed";
-		}
-	} else {
-	    my $boot = $hds->[0]{device};
-	    my $onmbr = "/dev/$boot" eq $b->{boot};
-	    $b->{boot} = "/dev/" . ($in->ask_from_list_(_("LILO/grub Installation"),
-							_("Where do you want to install the bootloader?"),
-							\@l, $l[!$onmbr]) eq $l[0] 
-				    ? $boot : fsedit::get_root($fstab, 'boot')->{device});
-	}
-    } else {
-	$in->set_help(arch() =~ /sparc/ ? "setupSILOGeneral" :  arch() =~ /ppc/ ? 'setupYabootGeneral' :"setupBootloader") unless $::isStandalone; #- TO MERGE ?
-
-	my @silo_install_lang = (_("First sector of drive (MBR)"), _("First sector of boot partition"));
-	my $silo_install_lang = $silo_install_lang[$b->{use_partition}];
-
-	my %bootloaders = (if_(exists $b->{methods}{silo},
-			       __("SILO")                     => sub { $b->{methods}{silo} = 1 }),
-			   if_(exists $b->{methods}{lilo},
-			       __("LILO with text menu")      => sub { $b->{methods}{lilo} = "lilo-menu" },
-			       __("LILO with graphical menu") => sub { $b->{methods}{lilo} = "lilo-graphic" }),
-			   if_(exists $b->{methods}{grub},
-			       #- put lilo if grub is chosen, so that /etc/lilo.conf is generated
-			       __("Grub")                     => sub { $b->{methods}{grub} = 1;
-								       exists $b->{methods}{lilo}
-									 and $b->{methods}{lilo} = "lilo-menu" }),
-			   if_(exists $b->{methods}{loadlin},
-			       __("Boot from DOS/Windows (loadlin)") => sub { $b->{methods}{loadlin} = 1 }),
-			   if_(exists $b->{methods}{yaboot},
-			       __("Yaboot") => sub { $b->{methods}{yaboot} = 1 }),
-			  );
-	my $bootloader = arch() =~ /sparc/ ? __("SILO") : arch() =~ /ppc/ ? __("Yaboot") : __("LILO with graphical menu");
-	my $profiles = bootloader::has_profiles($b);
-	my $memsize = bootloader::get_append($b, 'mem');
-	my $prev_clean_tmp = my $clean_tmp = grep { $_->{mntpoint} eq '/tmp' } @{$all_hds->{special} ||= []};
-
-	$b->{vga} ||= 'normal';
-	if (arch() !~ /ppc/) {
-	$in->ask_from('', _("Bootloader main options"), [
-{ label => _("Bootloader to use"), val => \$bootloader, list => [ keys(%bootloaders) ], format => \&translate },
-    arch() =~ /sparc/ ? (
-{ label => _("Bootloader installation"), val => \$silo_install_lang, list => \@silo_install_lang },
-) : if_(arch() !~ /ia64/,
-{ label => _("Boot device"), val => \$b->{boot}, list => [ map { "/dev/$_" } (map { $_->{device} } (@$hds, grep { !isFat($_) } @$fstab)), detect_devices::floppies_dev() ], not_edit => !$::expert },
-{ label => _("LBA (doesn't work on old BIOSes)"), val => \$b->{lba32}, type => "bool", text => "lba", advanced => 1 },
-{ label => _("Compact"), val => \$b->{compact}, type => "bool", text => _("compact"), advanced => 1 },
-{ label => _("Video mode"), val => \$b->{vga}, list => [ keys %bootloader::vga_modes ], not_edit => !$::expert, format => sub { $bootloader::vga_modes{$_[0]} }, advanced => 1 },
-),
-{ label => _("Delay before booting default image"), val => \$b->{timeout} },
-    if_($security >= 4,
-{ label => _("Password"), val => \$b->{password}, hidden => 1 },
-{ label => _("Password (again)"), val => \$b->{password2}, hidden => 1 },
-{ label => _("Restrict command line options"), val => \$b->{restricted}, type => "bool", text => _("restrict") },
-    ),
-{ label => _("Clean /tmp at each boot"), val => \$clean_tmp, type => 'bool', advanced => 1 },
-{ label => _("Precise RAM size if needed (found %d MB)", availableRamMB()), val => \$memsize, advanced => 1 },
-    if_(detect_devices::isLaptop,
-{ label => _("Enable multi profiles"), val => \$profiles, type => 'bool', advanced => 1 },
-    ),
-],
-				 complete => sub {
-				     !$memsize || $memsize =~ /K$/ || $memsize =~ s/^(\d+)M?$/$1M/i or $in->ask_warn('', _("Give the ram size in MB")), return 1;
-#-				     $security > 4 && length($b->{password}) < 6 and $in->ask_warn('', _("At this level of security, a password (and a good one) in lilo is requested")), return 1;
-				     $b->{restricted} && !$b->{password} and $in->ask_warn('', _("Option ``Restrict command line options'' is of no use without a password")), return 1;
-				     $b->{password} eq $b->{password2} or !$b->{restricted} or $in->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return 1;
-				     0;
-				 }
-				) or return 0;
-	} else {
-	$b->{boot} = $partition_table_mac::bootstrap_part;	
-	$in->ask_from('', _("Bootloader main options"), [
-	{ label => _("Bootloader to use"), val => \$bootloader, list => [ keys(%bootloaders) ], format => \&translate },	
-	{ label => _("Init Message"), val => \$b->{'init-message'} },
-	{ label => _("Boot device"), val => \$b->{boot}, list => [ map { "/dev/$_" } (map { $_->{device} } (grep { isAppleBootstrap($_) } @$fstab))], not_edit => !$::expert },
-	{ label => _("Open Firmware Delay"), val => \$b->{delay} },
-	{ label => _("Kernel Boot Timeout"), val => \$b->{timeout} },
-	{ label => _("Enable CD Boot?"), val => \$b->{enablecdboot}, type => "bool" },
-	{ label => _("Enable OF Boot?"), val => \$b->{enableofboot}, type => "bool" },
-	{ label => _("Default OS?"), val=> \$b->{defaultos}, list => [ 'linux', 'macos', 'macosx', 'darwin' ] },
-	]) or return 0;				
-	}
-	
-	$b->{methods}{$_} = 0 foreach keys %{$b->{methods}};
-	$bootloaders{$bootloader} and $bootloaders{$bootloader}->();
-
-	grub_installed($in) or return 1 if $b->{methods}{grub};
-
-	#- at least one method
-	grep_each { $::b } %{$b->{methods}} or return 0;
-
-	$b->{use_partition} = $silo_install_lang eq _("First sector of drive (MBR)") ? 0 : 1;
-
-	bootloader::set_profiles($b, $profiles);
-	bootloader::add_append($b, "mem", $memsize);
-
-	if ($prev_clean_tmp != $clean_tmp) {
-	    if ($clean_tmp) {
-		push @{$all_hds->{special}}, { device => 'none', mntpoint => '/tmp', type => 'tmpfs' };
-	    } else {
-		@{$all_hds->{special}} = grep { $_->{mntpoint} eq '/tmp' } @{$all_hds->{special}};
-	    }
-	}
-    }
-
-    #- remove bios mapping if the user changed the boot device
-    delete $b->{bios} if $b->{boot} ne $prev_boot;
-
-    if ($mixed_kind_of_disks && 
-#	$b->{boot} !~ /$hds->[0]{device}/ && #- not the first disk
-	$b->{boot} =~ /\d$/ && #- on a partition
-	is_empty_hash_ref($b->{bios}) && #- some bios mapping already there
-	arch() !~ /ppc/) {
-	my $hd = $in->ask_from_listf('', _("You decided to install the bootloader on a partition.
-This implies you already have a bootloader on the hard drive you boot (eg: System Commander).
-
-On which drive are you booting?"), \&partition_table::description, $hds) or goto &setupBootloader;
-	$b->{first_hd_device} = "/dev/$hd->{device}";
-    }
-
-    $ask_per_entries or return 1;
-
-    while (1) {
-	$in->set_help(arch() =~ /sparc/ ? 'setupSILOAddEntry' : arch() =~ /ppc/ ? 'setupYabootAddEntry' : 'setupBootloaderAddEntry') unless $::isStandalone;
-	my ($c, $e);
-	$in->ask_from_(
-		{
-		 messages => 
-_("Here are the entries on your boot menu so far.
-You can add some more or change the existing ones."),
-		 ok => '',
-},
-		[ { val => \$e, type => 'combo', format => sub {
-		    my ($e) = @_;
-		    ref $e ? 
-		      "$e->{label} ($e->{kernel_or_dev})" . ($b->{default} eq $e->{label} && "  *") : 
-		      translate($e);
-		}, list => [ @{$b->{entries}} ], allow_empty_list => 1 },
-		  (map { my $s = $_; { val => translate($_), clicked_may_quit => sub { $c = $s; 1 } } } (if_(@{$b->{entries}} > 0, __("Modify")), __("Add"), __("Done"))),
-		]
-	);
-	!$c || $c eq "Done" and last;
-
-	if ($c eq "Add") {
-	    my @labels = map { $_->{label} } @{$b->{entries}};
-	    my $prefix;
-	    if ($in->ask_from_list_('', _("Which type of entry do you want to add?"),
-				    [ __("Linux"), arch() =~ /sparc/ ? __("Other OS (SunOS...)") : arch() =~ /ppc/ ? 
-				   __("Other OS (MacOS...)") : __("Other OS (windows...)") ]
-				   ) eq "Linux") {
-		$e = { type => 'image',
-		       root => '/dev/' . fsedit::get_root($fstab)->{device}, #- assume a good default.
-		     };
-		$prefix = "linux";
-	    } else {
-		$e = { type => 'other' };
-		$prefix = arch() =~ /sparc/ ? "sunos" : arch() =~ /ppc/ ? "macos" : "windows";;
-	    }
-	    $e->{label} = $prefix;
-	    for (my $nb = 0; member($e->{label}, @labels); $nb++) { $e->{label} = "$prefix-$nb" }
-	}
-	my %old_e = %$e;
-	my $default = my $old_default = $e->{label} eq $b->{default};
-
-	my @l;
-	if ($e->{type} eq "image") { 
-	    @l = (
-{ label => _("Image"), val => \$e->{kernel_or_dev}, list => [ map { s/$prefix//; $_ } glob_("$prefix/boot/vmlinuz*") ], not_edit => 0 },
-{ label => _("Root"), val => \$e->{root}, list => [ map { "/dev/$_->{device}" } @$fstab ], not_edit => !$::expert },
-{ label => _("Append"), val => \$e->{append} },
-  if_(arch !~ /ppc|ia64/,
-{ label => _("Video mode"), val => \$e->{vga}, list => [ keys %bootloader::vga_modes ], format => sub { $bootloader::vga_modes{$_[0]} }, not_edit => !$::expert },
-),
-{ label => _("Initrd"), val => \$e->{initrd}, list => [ map { s/$prefix//; $_ } glob_("$prefix/boot/initrd*") ], not_edit => 0 },
-{ label => _("Read-write"), val => \$e->{'read-write'}, type => 'bool' }
-	    );
-	    @l = @l[0..2] unless $::expert;
-	} else {
-	    @l = ( 
-{ label => _("Root"), val => \$e->{kernel_or_dev}, list => [ map { "/dev/$_->{device}" } @$fstab ], not_edit => !$::expert },
-if_(arch() !~ /sparc|ppc|ia64/,
-{ label => _("Table"), val => \$e->{table}, list => [ '', map { "/dev/$_->{device}" } @$hds ], not_edit => !$::expert },
-{ label => _("Unsafe"), val => \$e->{unsafe}, type => 'bool' }
-),
-	    );
-	    @l = $l[0] unless $::expert;
-	}
-if (arch() !~ /ppc/) {
-	@l = (
-{ label => _("Label"), val => \$e->{label} },
-@l,
-{ label => _("Default"), val => \$default, type => 'bool' },
-	);
-} else {
-	@l = ({ label => _("Label"), val => \$e->{label}, list=> ['macos', 'macosx', 'darwin'] },
-	@l );
-	if ($e->{type} eq "image") {
-		@l = ({ label => _("Label"), val => \$e->{label} },
-		$::expert ? @l[1..4] : (@l[1..2], { label => _("Append"), val => \$e->{append} }) ,
-		if_($::expert, { label => _("Initrd-size"), val => \$e->{initrdsize}, list => [ '', '4096', '8192', '16384', '24576' ] }),
-		if_($::expert, $l[5]),
-		{ label => _("NoVideo"), val => \$e->{novideo}, type => 'bool' },
-		{ label => _("Default"), val => \$default, type => 'bool' }
-		);
-	}
-}
-
-	if ($in->ask_from_(
-	    { 
-	     if_($c ne "Add", cancel => _("Remove entry")),
-	     callbacks => {
-	       complete => sub {
-		   $e->{label} or $in->ask_warn('', _("Empty label not allowed")), return 1;
-		   $e->{kernel_or_dev} or $in->ask_warn('', $e->{type} eq 'image' ? _("You must specify a kernel image") : _("You must specify a root partition")), return 1;
-		   member(lc $e->{label}, map { lc $_->{label} } grep { $_ != $e } @{$b->{entries}}) and $in->ask_warn('', _("This label is already used")), return 1;
-		   0;
-	       } } }, \@l)) {
-	    $b->{default} = $old_default || $default ? $default && $e->{label} : $b->{default};
-	    require bootloader;
-	    bootloader::configure_entry($prefix, $e); #- hack to make sure initrd file are built.
-
-	    push @{$b->{entries}}, $e if $c eq "Add";
-	} else {
-	    delete $b->{default} if $b->{default} eq $e->{label};
-	    @{$b->{entries}} = grep { $_ != $e } @{$b->{entries}};
-	}
-    }
-    1;
-}
-
-my @etc_pass_fields = qw(name pw uid gid realname home shell);
-sub unpack_passwd {
-    my ($l) = @_;
-    my %l; @l{@etc_pass_fields} = split ':', chomp_($l);
-    \%l;
-}
-sub pack_passwd {
-    my ($l) = @_;
-    join(':', @$l{@etc_pass_fields}) . "\n";
-}
-
-sub get_autologin {
-    my ($prefix, $o) = @_;
-    my %l = getVarsFromSh("$prefix/etc/sysconfig/autologin");
-    $o->{autologin} ||= $l{USER};
-    %l = getVarsFromSh("$prefix/etc/sysconfig/desktop");
-    $o->{desktop} ||= $l{DESKTOP};
-}
-
-sub set_autologin {
-  my ($prefix, $user, $desktop) = @_;
-
-  if ($user) {
-      my %l = getVarsFromSh("$prefix/etc/sysconfig/desktop");
-      $l{DESKTOP} = $desktop;
-      setVarsInSh("$prefix/etc/sysconfig/desktop", \%l);
-      log::l("cat $prefix/etc/sysconfig/desktop ($desktop):\n", cat_("$prefix/etc/sysconfig/desktop"));
-  }
-  setVarsInSh("$prefix/etc/sysconfig/autologin",
-	      { USER => $user, AUTOLOGIN => bool2yesno($user), EXEC => "/usr/X11R6/bin/startx" });
-  log::l("cat $prefix/etc/sysconfig/autologin ($user):\n", cat_("$prefix/etc/sysconfig/autologin"));
-}
-
-sub rotate_log {
-    my ($f) = @_;
-    if (-e $f) {
-	my $i = 1;
-	for (; -e "$f$i" || -e "$f$i.gz"; $i++) {}
-	rename $f, "$f$i";
-    }
-}
-sub rotate_logs {
-    my ($prefix) = @_;
-    rotate_log("$prefix/root/drakx/$_") foreach qw(ddebug.log install.log);
-}
-
-sub writeandclean_ldsoconf {
-    my ($prefix) = @_;
-    my $file = "$prefix/etc/ld.so.conf";
-    output $file,
-      grep { !m|^(/usr)?/lib$| } #- no need to have /lib and /usr/lib in ld.so.conf
-	uniq cat_($file), "/usr/X11R6/lib\n";
-}
-
-sub shells {
-    my ($prefix) = @_;
-    grep { -x "$prefix$_" } chomp_(cat_("$prefix/etc/shells"));
-}
-
-sub inspect {
-    my ($part, $prefix, $rw) = @_;
-
-    isMountableRW($part) or return;
-
-    my $dir = $::isInstall ? "/tmp/inspect_tmp_dir" : "/root/.inspect_tmp_dir";
-
-    if ($part->{isMounted}) {
-	$dir = ($prefix || '') . $part->{mntpoint};
-    } elsif ($part->{notFormatted} && !$part->{isFormatted}) {
-	$dir = '';
-    } else {
-	mkdir $dir, 0700;
-	eval { fs::mount($part->{device}, $dir, type2fs($part), !$rw) };
-	$@ and return;
-    }
-    my $h = before_leaving {
-	if (!$part->{isMounted} && $dir) {
-	    fs::umount($dir);
-	    unlink($dir)
-	}
-    };
-    $h->{dir} = $dir;
-    $h;
-}
-
-#-----modem conf
-sub pppConfig {
-    my ($in, $modem, $prefix) = @_;
-    $modem or return;
-
-    if ($modem->{device} ne "/dev/modem") {
-	devfssymlinkf($modem->{device}, 'modem', $prefix) or log::l("creation of $prefix/dev/modem failed")
-    }
-    $in->do_pkgs->install('ppp') if !$::testing;
-
-    my %toreplace;
-    $toreplace{$_} = $modem->{$_} foreach qw(connection phone login passwd auth domain dns1 dns2);
-    $toreplace{kpppauth} = ${{ 'Script-based' => 0, 'PAP' => 1, 'Terminal-based' => 2, }}{$modem->{auth}};
-    $toreplace{kpppauth} = ${{ 'Script-based' => 0, 'PAP' => 1, 'Terminal-based' => 2, 'CHAP' => 3 }}{$modem->{auth}};
-    $toreplace{phone} =~ s/\D//g;
-    $toreplace{dnsserver} = join ',', map { $modem->{$_} } "dns1", "dns2";
-    $toreplace{dnsserver} .= $toreplace{dnsserver} && ',';
-
-    #- using peerdns or dns1,dns2 avoid writing a /etc/resolv.conf file.
-    $toreplace{peerdns} = "yes";
-
-    $toreplace{connection} ||= 'DialupConnection';
-    $toreplace{domain} ||= 'localdomain';
-    $toreplace{intf} ||= 'ppp0';
-    $toreplace{papname} = ($modem->{auth} eq 'PAP' || $modem->{auth} eq 'CHAP') && $toreplace{login};
-
-    #- build ifcfg-ppp0.
-    my $ifcfg = "$prefix/etc/sysconfig/network-scripts/ifcfg-ppp0";
-    local *IFCFG; open IFCFG, ">$ifcfg" or die "Can't open $ifcfg";
-    print IFCFG <<END;
-DEVICE="$toreplace{intf}"
-ONBOOT="no"
-USERCTL="no"
-MODEMPORT="/dev/modem"
-LINESPEED="115200"
-PERSIST="yes"
-DEFABORT="yes"
-DEBUG="yes"
-INITSTRING="ATZ"
-DEFROUTE="yes"
-HARDFLOWCTL="yes"
-ESCAPECHARS="no"
-PPPOPTIONS=""
-PAPNAME="$toreplace{papname}"
-REMIP=""
-NETMASK=""
-IPADDR=""
-MRU=""
-MTU=""
-DISCONNECTTIMEOUT="5"
-RETRYTIMEOUT="60"
-BOOTPROTO="none"
-PEERDNS="$toreplace{peerdns}"
-END
-    foreach (1..2) {
-	if ($toreplace{"dns$_"}) {
-	    print IFCFG <<END;
-DNS$_=$toreplace{"dns$_"}
-END
-	}
-    }
-    close IFCFG;
-
-    #- build chat-ppp0.
-    my $chat = "$prefix/etc/sysconfig/network-scripts/chat-ppp0";
-    local *CHAT; open CHAT, ">$chat" or die "Can't open $chat";
-    print CHAT <<END;
-'ABORT' 'BUSY'
-'ABORT' 'ERROR'
-'ABORT' 'NO CARRIER'
-'ABORT' 'NO DIALTONE'
-'ABORT' 'Invalid Login'
-'ABORT' 'Login incorrect'
-'' 'ATZ'
-END
-    if ($modem->{special_command}) {
-	print CHAT <<END;
-'OK' '$modem->{special_command}'
-END
-    }
-    print CHAT <<END;
-'OK' 'ATDT$toreplace{phone}'
-'CONNECT' ''
-END
-    if ($modem->{auth} eq 'Terminal-based' || $modem->{auth} eq 'Script-based') {
-	print CHAT <<END;
-'ogin:--ogin:' '$toreplace{login}'
-'ord:' '$toreplace{passwd}'
-END
-    }
-    print CHAT <<END;
-'TIMEOUT' '5'
-'~--' ''
-END
-    close CHAT;
-    chmod 0600, $chat;
-
-    if ($modem->{auth} eq 'PAP' || $modem->{auth} eq 'CHAP') {
-	#- need to create a secrets file for the connection.
-	my $secrets = "$prefix/etc/ppp/" . lc($modem->{auth}) . "-secrets";
-	my @l = cat_($secrets);
-	my $replaced = 0;
-	do { $replaced ||= 1
-	       if s/^\s*"?$toreplace{login}"?\s+ppp0\s+(\S+)/"$toreplace{login}"  ppp0  "$toreplace{passwd}"/; } foreach @l;
-	if ($replaced) {
-	    local *F;
-	    open F, ">$secrets" or die "Can't open $secrets: $!";
-	    print F @l;
-        } else {
-	    local *F;
-	    open F, ">>$secrets" or die "Can't open $secrets: $!";
-	    print F "$toreplace{login}  ppp0  \"$toreplace{passwd}\"\n";
-	}
-	#- restore access right to secrets file, just in case.
-	chmod 0600, $secrets;
-    }
-
-    #- install kppprc file according to used configuration.
-    mkdir_p("$prefix/usr/share/config");
-
-    {
-	local *KPPPRC;
-	open KPPPRC, ">$prefix/usr/share/config/kppprc" or die "Can't open $prefix/usr/share/config/kppprc: $!";
-	#chmod 0600, "$prefix/usr/share/config/kppprc";
-	print KPPPRC c::to_utf8(<<END);
-# KDE Config File
-[Account0]
-ExDNSDisabled=0
-AutoName=0
-ScriptArguments=
-AccountingEnabled=0
-DialString=ATDT
-Phonenumber=$toreplace{phone}
-IPAddr=0.0.0.0
-Domain=$toreplace{domain}
-Name=$toreplace{connection}
-VolumeAccountingEnabled=0
-pppdArguments=
-Password=$toreplace{passwd}
-BeforeDisconnect=
-Command=
-ScriptCommands=
-Authentication=$toreplace{kpppauth}
-DNS=$toreplace{dnsserver}
-SubnetMask=0.0.0.0
-AccountingFile=
-DefaultRoute=1
-Username=$toreplace{login}
-Gateway=0.0.0.0
-StorePassword=1
-DisconnectCommand=
-[Modem]
-BusyWait=0
-Enter=CR
-FlowControl=CRTSCTS
-Volume=0
-Timeout=60
-UseCDLine=0
-UseLockFile=1
-Device=/dev/modem
-Speed=115200
-[Graph]
-InBytes=0,0,255
-Text=0,0,0
-Background=255,255,255
-Enabled=true
-OutBytes=255,0,0
-[General]
-QuitOnDisconnect=0
-ShowLogWindow=0
-DisconnectOnXServerExit=1
-DefaultAccount=$toreplace{connection}
-iconifyOnConnect=1
-Hint_QuickHelp=0
-AutomaticRedial=0
-PPPDebug=0
-NumberOfAccounts=1
-ShowClock=1
-DockIntoPanel=0
-pppdTimeout=30
-END
-    }
-    miscellaneousNetwork($prefix);
-}
-
-sub miscellaneousNetwork {
-    my ($prefix) = @_;
-    setVarsInSh ("$prefix/etc/profile.d/proxy.sh",  $::o->{miscellaneous}, qw(http_proxy ftp_proxy));
-    setVarsInCsh("$prefix/etc/profile.d/proxy.csh", $::o->{miscellaneous}, qw(http_proxy ftp_proxy));
-}
-
-sub load_category_no_message {
-    my ($category, $at_least_one) = @_;
-    my @l;
-    @l = modules::load_category($category, undef);
-    @l = modules::load_category($category, undef, 'force') if !@l && $at_least_one;
-    @l;
-}
-
-sub load_category {
-    my ($in, $category, $auto, $at_least_one) = @_;
-
-    my @l;
-    if (!$::noauto) {
-	my $w;
-	my $wait_message = sub { $w = wait_load_module($in, $category, @_) };
-	@l = modules::load_category($category, $wait_message);
-	@l = modules::load_category($category, $wait_message, 'force') if !@l && $at_least_one;
-    }
-    if (my @err = grep { $_ } map { $_->{error} } @l) {
-	$in->ask_warn('', join("\n", @err));
-    }
-    return @l if $auto && (@l || !$at_least_one);
-
-    @l = map { $_->{description} } @l;
-
-    if ($at_least_one && !@l) {
-	@l = load_category__prompt($in, $category) or return;
-    }
-
-    load_category__prompt_for_more($in, $category, @l);
-}
-
-sub load_category__prompt_for_more {
-    my ($in, $category, @l) = @_;
-
-    (my $msg_type = $category) =~ s/\|.*//;
-
-    while (1) {
-	my $msg = @l ?
-	  [ _("Found %s %s interfaces", join(", ", @l), $msg_type),
-	    _("Do you have another one?") ] :
-	  _("Do you have any %s interfaces?", $msg_type);
-
-	my $opt = [ __("Yes"), __("No") ];
-	push @$opt, __("See hardware info") if $::expert;
-	my $r = $in->ask_from_list_('', $msg, $opt, "No") or die 'already displayed';
-	if ($r eq "No") { return @l }
-	if ($r eq "Yes") {
-	    push @l, load_category__prompt($in, $category) || next;
-	} else {
-	    $in->ask_warn('', [ detect_devices::stringlist() ]);
-	}
-    }
-}
-
-sub wait_load_module {
-    my ($in, $category, $text, $module) = @_;
-#-PO: the first %s is the card type (scsi, network, sound,...)
-#-PO: the second is the vendor+model name
-    $in->wait_message('',
-		     [ _("Installing driver for %s card %s", $category, $text),
-		       if_($::expert, _("(module %s)", $module))
-		     ]);
-}
-
-sub load_module__ask_options {
-    my ($in, $module_descr, $parameters) = @_;
-
-    if (@$parameters) {
-	$in->ask_from('', 
-		      _("You may now provide its options to module %s.\nNote that any address should be entered with the prefix 0x like '0x123'", $module_descr), 
-		      [ map {; { label => $_->[0], help => $_->[1], val => \$_->[2] } } @$parameters ],
-		     ) or return;
-	map { if_($_->[2], "$_->[0]=$_->[2]") } @$parameters;
-    } else {
-	split ' ', $in->ask_from_entry('',
-_("You may now provide options to module %s.
-Options are in format ``name=value name2=value2 ...''.
-For instance, ``io=0x300 irq=7''", $module_descr), _("Module options:"),
-				);
-    }
-}
-
-sub load_category__prompt {
-    my ($in, $category) = @_;
-
-    (my $msg_type = $category) =~ s/\|.*//;
-    my %available_modules = map_each { $::a => $::b ? "$::a ($::b)" : $::a } modules::category2modules_and_description($category);
-    my $module = $in->ask_from_listf('',
-#-PO: the %s is the driver type (scsi, network, sound,...)
-			       _("Which %s driver should I try?", $msg_type),
-			       sub { $available_modules{$_[0]} },
-			       [ keys %available_modules ]) or return;
-    my $module_descr = $available_modules{$module};
-
-    my @options;
-    require modparm;
-    my @parameters = modparm::parameters($module);
-    if (@parameters && $in->ask_from_list_('',
-_("In some cases, the %s driver needs to have extra information to work
-properly, although it normally works fine without. Would you like to specify
-extra options for it or allow the driver to probe your machine for the
-information it needs? Occasionally, probing will hang a computer, but it should
-not cause any damage.", $module_descr), [ __("Autoprobe"), __("Specify options") ], 'Autoprobe') ne 'Autoprobe') {
-	@options = load_module__ask_options($in, $module_descr, \@parameters);
-    }
-    while (1) {
-	eval {
-	    my $w = wait_load_module($in, $category, $module_descr, $module);
-	    log::l("user asked for loading module $module (type $category, desc $module_descr)");
-	    modules::load([ $module, @options ]);
-	};
-	return $module_descr if !$@;
-
-	$in->ask_yesorno('',
-_("Loading module %s failed.
-Do you want to try again with other parameters?", $module_descr), 1) or return;
-
-	@options = load_module__ask_options($in, $module_descr, \@parameters);
-    }
-}
-
-sub ask_users {
-    my ($prefix, $in, $users, $security) = @_;
-
-    my $u if 0; $u ||= {};
-
-    my @shells = map { chomp; $_ } cat_("$prefix/etc/shells");
-    my @icons = facesnames($prefix);
-
-    my %high_security_groups = (
-        xgrp => _("access to X programs"),
-	rpm => _("access to rpm tools"),
-	wheel => _("allow \"su\""),
-	adm => _("access to administrative files"),
-    );
-    while (1) {
-	$u->{password2} ||= $u->{password} ||= '';
-	$u->{shell} ||= '/bin/bash';
-	my $names = @$users ? _("(already added %s)", join(", ", map { $_->{realname} || $_->{name} } @$users)) : '';
-
-	my %groups;
-	my $verif = sub {
-	    $u->{password} eq $u->{password2} or $in->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return (1,2);
-	    $security > 3 && length($u->{password}) < 6 and $in->ask_warn('', _("This password is too simple")), return (1,2);
-	    $u->{name} or $in->ask_warn('', _("Please give a user name")), return (1,0);
-	    $u->{name} =~ /^[a-z0-9_-]+$/ or $in->ask_warn('', _("The user name must contain only lower cased letters, numbers, `-' and `_'")), return (1,0);
-	    length($u->{name}) <= 32 or $in->ask_warn('', _("The user name is too long")), return (1,0);
-	    member($u->{name}, map { $_->{name} } @$users) and $in->ask_warn('', _("This user name is already added")), return (1,0);
-	    return 0;
-	};
-	my $ret = $in->ask_from_(
-	    { title => _("Add user"),
-	      messages => _("Enter a user\n%s", $names),
-	      ok => _("Accept user"),
-	      cancel => $security < 4 || @$users ? _("Done") : '',
-	      callbacks => {
-	          focus_out => sub {
-		      if ($_[0] eq 0) {
-			  $u->{name} ||= lc first($u->{realname} =~ /([\w-]+)/);
-		      }
-		  },
-	          complete => $verif,
-                  canceled => sub { $u->{name} ? &$verif : 0; },
-	    } }, [ 
-	    { label => _("Real name"), val => \$u->{realname} },
-	    { label => _("User name"), val => \$u->{name} },
-            { label => _("Password"),val => \$u->{password}, hidden => 1 },
-            { label => _("Password (again)"), val => \$u->{password2}, hidden => 1 },
-            { label => _("Shell"), val => \$u->{shell}, list => [ shells($prefix) ], not_edit => !$::expert, advanced => 1 },
-	      if_($security <= 3 && @icons,
-	    { label => _("Icon"), val => \ ($u->{icon} ||= 'man'), list => \@icons, icon2f => sub { face2png($_[0], $prefix) }, format => \&translate },
-	      ),
-	      if_($security > 3,
-		  map {; 
-            { label => $_, val => \$groups{$_}, text => $high_security_groups{$_}, type => 'bool' }
-		  } keys %high_security_groups,
-	      ),
-           ],
-        );
-	$u->{groups} = [ grep { $groups{$_} } keys %groups ];
-
-	push @$users, $u if $u->{name};
-	$u = {};
-	$ret or return;
-    }
-}
-
-sub autologin {
-    my ($prefix, $o, $in) = @_;
-
-    my $cmd = $prefix ? "chroot $prefix" : "";
-    my @wm = (split (' ', `$cmd /usr/sbin/chksession -l 2>/dev/null`));
-    my @users = map { $_->{name} } @{$o->{users} || []};
-
-    if (@wm > 1 && @users && !$o->{authentication}{NIS} && $o->{security} <= 2) {
-	add2hash_($o, { autologin => $users[0] });
-
-	$in->ask_from_(
-		       { title => _("Autologin"),
-			 messages => _("I can set up your computer to automatically log on one user.
-Do you want to use this feature?"),
-			 ok => _("Yes"),
-			 cancel => _("No") },
-		       [ { label => _("Choose the default user:"), val => \$o->{autologin}, list => \@users },
-			 { label => _("Choose the window manager to run:"), val => \$o->{desktop}, list => \@wm } ]
-		      )
-	  or delete $o->{autologin};
-    } else {
-	delete $o->{autologin};
-    }
-}
-
-sub selectLanguage {
-    my ($in, $lang, $langs_) = @_;
-    my $langs = $langs_ || {};
-    my @langs = lang::list(exclude_non_necessary_utf8 => $::isInstall, 
-			   exclude_non_installed_langs => !$::isInstall,
-			  );
-    $in->ask_from_(
-	{ messages => _("Please choose a language to use."),
-	  title => 'language choice',
-	  advanced_messages => formatAlaTeX(_("Mandrake Linux can support multiple languages. Select
-the languages you would like to install. They will be available
-when your installation is complete and you restart your system.")),
-	  callbacks => {
-	      focus_out => sub { $langs->{$lang} = 1 },
-	  },
-	},
-	[ { val => \$lang, separator => '|', 
-	    format => \&lang::lang2text, list => \@langs },
-	    if_($langs_, (map {;
-	       { val => \$langs->{$_->[0]}, type => 'bool', disabled => sub { $langs->{all} },
-		 text => $_->[1], advanced => 1,
-	       } 
-	   } sort { $a->[1] cmp $b->[1] } map { [ $_, lang::lang2text($_) ] } lang::list()),
-	  { val => \$langs->{all}, type => 'bool', text => _("All"), advanced => 1 }),
-	]) or return;
-    $lang;
-}
-
-sub write_passwd_user {
-    my ($prefix, $u, $isMD5) = @_;
-
-    $u->{pw} = &crypt($u->{password}, $isMD5) if $u->{password};
-    $u->{shell} ||= '/bin/bash';
-
-    substInFile {
-	my $l = unpack_passwd($_);
-	if ($l->{name} eq $u->{name}) {
-	    add2hash_($u, $l);
-	    $_ = pack_passwd($u);
-	    $u = {};
-	}
-	if (eof && $u->{name}) {
-	    $_ .= pack_passwd($u);
-	}
-    } "$prefix/etc/passwd";
-}
-
-sub set_login_serial_console {
-    my ($prefix, $port, $speed) = @_;
-
-    my $line = "s$port:12345:respawn:/sbin/getty ttyS$port DT$speed ansi\n";
-    substInFile { s/^s$port:.*//; $_ = "$line" if eof } "$prefix/etc/inittab";
-}
-
-
-sub runlevel {
-    my ($prefix, $runlevel) = @_;
-    my $f = "$prefix/etc/inittab";
-    -r $f or log::l("missing inittab!!!"), return;
-    if ($runlevel) {
-	substInFile { s/^id:\d:initdefault:\s*$/id:$runlevel:initdefault:\n/ } $f;
-    } else {
-	cat_($f) =~ /^id:(\d):initdefault:\s*$/ && $1;
-    }
-}
-
-sub report_bug {
-    my ($prefix, @other) = @_;
-
-    sub header { "
-********************************************************************************
-* $_[0]
-********************************************************************************";
-    }
-
-    join '', map { chomp; "$_\n" }
-      header("lspci"), detect_devices::stringlist(),
-      header("pci_devices"), cat_("/proc/bus/pci/devices"),
-      header("fdisk"), arch() =~ /ppc/ ? `$ENV{LD_LOADER} pdisk -l` : `$ENV{LD_LOADER} fdisk -l`,
-      header("scsi"), cat_("/proc/scsi/scsi"),
-      header("lsmod"), cat_("/proc/modules"),
-      header("cmdline"), cat_("/proc/cmdline"),
-      header("pcmcia: stab"), cat_("$prefix/var/lib/pcmcia/stab") || cat_("$prefix/var/run/stab"),
-      header("usb"), cat_("/proc/bus/usb/devices"),
-      header("partitions"), cat_("/proc/partitions"),
-      header("cpuinfo"), cat_("/proc/cpuinfo"),
-      header("syslog"), cat_("/tmp/syslog") || cat_("$prefix/var/log/syslog"),
-      header("ddcxinfos"), ddcxinfos(),
-      header("stage1.log"), cat_("/tmp/stage1.log") || cat_("$prefix/root/drakx/stage1.log"),
-      header("ddebug.log"), cat_("/tmp/ddebug.log") || cat_("$prefix/root/drakx/ddebug.log"),
-      header("install.log"), cat_("$prefix/root/drakx/install.log"),
-      header("fstab"), cat_("$prefix/etc/fstab"),
-      header("modules.conf"), cat_("$prefix/etc/modules.conf"),
-      header("lilo.conf"), cat_("$prefix/etc/lilo.conf"),
-      header("menu.lst"), cat_("$prefix/boot/grub/menu.lst"),
-      header("/etc/modules"), cat_("$prefix/etc/modules"),
-      map_index { even($::i) ? header($_) : $_ } @other;
-}
-
-sub devfssymlinkf {
-    my ($if, $of, $prefix) = @_;
-    symlinkf($if, "$prefix/dev/$of");
-
-    output_p("$prefix/etc/devfs/conf.d/$of.conf", 
-"REGISTER	^$if\$	CFUNCTION GLOBAL symlink $if $of
-UNREGISTER	^$if\$	CFUNCTION GLOBAL unlink $of
-");
-}
-
-sub fileshare_config {
-    my ($in, $type) = @_; #- $type is 'nfs', 'smb' or ''
-
-    my $file = '/etc/security/fileshare.conf';
-    my %conf = getVarsFromSh($file);
-
-    my @l = (__("No sharing"), __("Allow all users"), __("Custom"));
-    my $restrict = exists $conf{RESTRICT} ? text2bool($conf{RESTRICT}) : 1;
-
-    if ($restrict) {
-	#- verify we can export in $type
-	my %type2file = (nfs => [ '/etc/init.d/nfs', 'nfs-utils' ], smb => [ '/etc/init.d/smb', 'samba' ]);
-	my @wanted = $type ? $type : keys %type2file;
-	my @have = grep { -e $type2file{$_}[0] } @wanted;
-	if (!@have) {
-	    if (@wanted == 1) {
-		$in->ask_okcancel('', _("The package %s needs to be installed. Do you want to install it?", $type2file{$wanted[0]}[1]), 1) or return;
-	    } else {
-		my %choices;
-		my $wanted = $in->ask_many_from_list('', _("You can export using NFS or Samba. Please select which you'd like to use."),
-						  { list => \@wanted }) or return;
-		@wanted = @$wanted or return;
-	    }
-	    $in->do_pkgs->install(map { $type2file{$_}[1] } @wanted);
-	    @have = grep { -e $type2file{$_}[0] } @wanted;
-	}
-	if (!@have) {
-	    $in->ask_warn('', _("Mandatory package %s is missing", $wanted[0]));
-	    return;
-	}
-    }
-
-    my $r = $in->ask_from_list_('fileshare',
-_("Would you like to allow users to share some of their directories?
-Allowing this will permit users to simply click on \"Share\" in konqueror and nautilus.
-
-\"Custom\" permit a per-user granularity.
-"),
-				\@l, $l[$restrict ? 0 : 1]) or return;
-    $restrict = $r ne $l[1];
-    $conf{RESTRICT} = bool2yesno($restrict);
-
-    setVarsInSh($file, \%conf);
-    if ($r eq $l[2]) {
-	# custom
-	if ($in->ask_from_no_check(
-	{
-	 -e '/usr/bin/userdrake' ? (ok => _("Launch userdrake"), cancel => _("Cancel")) : (cancel => ''),
-	 messages =>
-_("The per-user sharing uses the group \"fileshare\". 
-You can use userdrake to add a user in this group.")
-	}, [])) {
-	    if (!fork) { exec "userdrake" or c::_exit(0) }
-	}
-    }
-}
-
-sub ddcxinfos {
-    my @l = `$ENV{LD_LOADER} ddcxinfos`;
-    if ($::isInstall && -e "/tmp/ddcxinfos") {
-	my @l_old = cat_("/tmp/ddcxinfos");
-	if (@l < @l_old) {
-	    log::l("new ddcxinfos is worse, keeping the previous one");
-	    @l = @l_old;
-	} elsif (@l > @l_old) {
-	    log::l("new ddcxinfos is better, dropping the previous one");
-	}
-    }
-    output("/tmp/ddcxinfos", @l) if $::isInstall;
-    @l;
-}
-
-sub config_libsafe {
-    my ($prefix, $libsafe) = @_;
-    my %t = getVarsFromSh("$prefix/etc/sysconfig/system");
-    if (@_ > 1) {
-	$t{LIBSAFE} = bool2yesno($libsafe);
-	setVarsInSh("$prefix/etc/sysconfig/system", \%t);
-    }
-    text2bool($t{LIBSAFE});
-}
-
-sub choose_security_options {
-    my ($in, $security, $libsafe, $email, $options) = @_;
-    my $expert_file = "/etc/security/msec/expert_mode";
-		      
-    my @shown_options = ();
-    my $key = "";
-    my $i=0;
-    my $title;
-		        
-    my $expert_section = cat_($expert_file);
-
-    if ($expert_section == 0) { $title = _("DrakSec - Network Advanced Options"); }
-    elsif ($expert_section == 1) { $title = _("DrakSec - User Advanced Options"); }
-    elsif ($expert_section == 2) { $title = _("DrakSec - Server Advanced Options"); }
-
-    for $key (keys %$options) {
-       $shown_options[$i]->{label} = "$options->{$key}{label}";
-       $shown_options[$i]->{val} = $options->{$key}{val};
-       $shown_options[$i]->{list} = $options->{$key}{list};
-       $shown_options[$i]->{type} = $options->{$key}{type};
-       $i++;
-    }
-
-    $in->ask_from(
-         $title,
-         _("Choose advanced security options\n\n"),
-         [
-            @shown_options
-         ]
-    );
-}
-
-sub choose_security_level {
-    my ($in, $security, $libsafe) = @_;
-    my $expert_file = "/etc/security/msec/expert_mode";
-
-    my $email;
-
-    my %l = (
-      0 => _("Welcome To Crackers"),
-      1 => _("Poor"),
-      2 => _("Standard"),
-      3 => _("High"),
-      4 => _("Higher"),
-      5 => _("Paranoid"),
-    );
-    my %help = (
-      0 => _("This level is to be used with care. It makes your system more easy to use,
-but very sensitive: it must not be used for a machine connected to others
-or to the Internet. There is no password access."),
-      1 => _("Password are now enabled, but use as a networked computer is still not recommended."),
-      2 => _("This is the standard security recommended for a computer that will be used to connect to the Internet as a client."),
-      3 => _("There are already some restrictions, and more automatic checks are run every night."),
-      4 => _("With this security level, the use of this system as a server becomes possible.
-The security is now high enough to use the system as a server which can accept
-connections from many clients. Note: if your machine is only a client on the Internet, you should better choose a lower level."),
-      5 => _("This is similar to the previous level, but the system is entirely closed and security features are at their maximum."),
-    );
-    delete @l{0,1};
-    delete $l{5} if !$::expert;
-
-    $in->ask_from(
-            ("DrakSec Basic Options"),
-            ("Please choose the desired security level") . "\n\n" .
-            join('', map { "$l{$_}: " . formatAlaTeX($help{$_}) . "\n\n" } keys %l),
-            [
-              { label => _("Security level"), val => $security, list => [ sort keys %l ], format => sub { $l{$_} } },
-                if_($in->do_pkgs->is_installed('libsafe') && arch() =~ /^i.86/,
-                { label => _("Use libsafe for servers"), val => $libsafe, type => 'bool', text =>
-                  _("A library which defends against buffer overflow and format string attacks.") } ),
-                { label => _("Security user (login or email)"), val => $email, },
-                { clicked_may_quit => sub { open(EXPERT, '>'.$expert_file); print EXPERT "0"; close EXPERT; },
-                  val => _("NETWORK-RELATED SECURITY OPTIONS") },
-                { clicked_may_quit => sub { open(EXPERT, '>'.$expert_file); print EXPERT "1"; close EXPERT; },
-                  val => _("USER-RELATED SECURITY OPTIONS") },
-                { clicked_may_quit => sub { open(EXPERT, '>'.$expert_file); print EXPERT "2"; close EXPERT; },
-                  val => _("SERVER-RELATED SECURITY OPTIONS") }
-            ],
-    );
-													 }
-
-sub running_window_manager {
-    my @window_managers = (
-	'kdeinit: kwin', 
-	qw(gnome-session icewm wmaker kwm afterstep fvwm fvwm2 fvwm95 mwm twm enlightenment xfce blackbox sawfish olvwm),
-    );
-    foreach (@window_managers) {
-	return $_ if `/sbin/pidof "$_"` > 0;
-    }
-    '';
-}
-
-sub ask_window_manager_to_logout {
-    my ($wm) = @_;
-    
-    my %h = (
-	'kwm' => "kwmcom logout",
-	'kdeinit: kwin' => "su $ENV{USER} -c 'dcop kdesktop default logout'",
-	'gnome-session' => "save-session --kill",
-	'icewm' => "killall -QUIT icewm",
-    );
-    system($h{$wm} || return);
-    1;
-}
-
-sub get_secure_level {
-    my ($prefix) = @_;
-
-    cat_("/etc/profile")           =~ /export SECURE_LEVEL=(\d+)/ && $1 || #- 8.0 msec
-    cat_("/etc/profile.d/msec.sh") =~ /export SECURE_LEVEL=(\d+)/ && $1 || #- 8.1 msec
-      ${{ getVarsFromSh("$prefix/etc/sysconfig/msec") }}{SECURE_LEVEL}  || #- 8.2 msec
-	$ENV{SECURE_LEVEL};
-}
-
-sub alloc_raw_device {
-    my ($prefix, $device) = @_;
-    my $used = 0;
-    my $raw_dev;
-    substInFile {
-	$used = max($used, $1) if m|^\s*/dev/raw/raw(\d+)|;
-	if (eof) {
-	    $raw_dev = "raw/raw" . ($used + 1);
-	    $_ .= "/dev/$raw_dev /dev/$device\n";
-	}
-    } "$prefix/etc/sysconfig/rawdevices";
-    $raw_dev;
-}
-
-sub config_dvd {
-    my ($prefix) = @_;
-    if (my @dvds = grep { detect_devices::isDvdDrive($_) } detect_devices::cdroms__faking_ide_scsi()) {
-	log::l("configuring DVD");
-	#- create /dev/dvd symlink
-	each_index {
-	    devfssymlinkf($_->{device}, 'dvd' . ($::i ? $::i + 1 : ''), $prefix);
-	} @dvds;
-	if (my $raw_dev = alloc_raw_device($prefix, 'dvd')) {
-	    devfssymlinkf($raw_dev, 'rdvd', $prefix);
-	}	
-    }
-}
-
-1;
diff --git a/perl-install/apps.net_monitor b/perl-install/apps.net_monitor
deleted file mode 100644
index d4dea7f88..000000000
--- a/perl-install/apps.net_monitor
+++ /dev/null
@@ -1,4 +0,0 @@
-USER=root
-PROGRAM=/usr/sbin/net_monitor.real
-SESSION=true
-FALLBACK=false
diff --git a/perl-install/bootloader.pm b/perl-install/bootloader.pm
deleted file mode 100644
index df290424d..000000000
--- a/perl-install/bootloader.pm
+++ /dev/null
@@ -1,1073 +0,0 @@
-package bootloader; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(%vga_modes);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use log;
-use any;
-use fsedit;
-use devices;
-use loopback;
-use detect_devices;
-use partition_table_raw;
-use run_program;
-use modules;
-
-
-%vga_modes = (
-'ask' => "Ask at boot",
-'normal' => "Normal",
-'0x0f01' => "80x50",
-'0x0f02' => "80x43",
-'0x0f03' => "80x28",
-'0x0f05' => "80x30",
-'0x0f06' => "80x34",
-'0x0f07' => "80x60",
-'0x0122' => "100x30",
- 785 => "640x480 in 16 bits (FrameBuffer only)",
- 788 => "800x600 in 16 bits (FrameBuffer only)",
- 791 => "1024x768 in 16 bits (FrameBuffer only)",
- 794 => "1280x1024 in 16 bits (FrameBuffer only)",
-);
-
-#-#####################################################################################
-#- Functions
-#-#####################################################################################
-
-sub get {
-    my ($kernel, $bootloader) = @_;
-    $_->{kernel_or_dev} && $_->{kernel_or_dev} eq $kernel and return $_ foreach @{$bootloader->{entries}};
-    undef;
-}
-sub get_label {
-    my ($label, $bootloader) = @_;
-    $_->{label} && $_->{label} eq $label and return $_ foreach @{$bootloader->{entries}};
-    undef;
-}
-
-sub mkinitrd($$$) {
-    my ($prefix, $kernelVersion, $initrdImage) = @_;
-
-    $::oem or $::testing || -e "$prefix/$initrdImage" and return;
-
-    my $loop_boot = loopback::prepare_boot($prefix);
-
-    modules::load('loop');
-    run_program::rooted($prefix, "mkinitrd", "-v", "-f", $initrdImage, "--ifneeded", $kernelVersion) or unlink("$prefix/$initrdImage");
-
-    loopback::save_boot($loop_boot);
-
-    -e "$prefix/$initrdImage" or die "mkinitrd failed";
-}
-
-sub mkbootdisk($$$;$) {
-    my ($prefix, $kernelVersion, $dev, $append) = @_;
-
-    modules::load(if_(arch() =~ /sparc/, 'romfs'), 'loop');
-    my @l = qw(mkbootdisk --noprompt); 
-    push @l, "--appendargs", $append if $append;
-    eval { modules::load('vfat') };
-    run_program::rooted_or_die($prefix, @l, "--device", "/dev/$dev", $kernelVersion);
-}
-
-sub read($$) {
-    my ($prefix, $file) = @_;
-    my $global = 1;
-    my ($e, $v, $f);
-    my %b;
-    foreach (cat_("$prefix$file")) {
-	($_, $v) = /^\s*(.*?)\s*(?:=\s*(.*?))?\s*$/;
-
-	if (/^(image|other)$/) {
-	    if (arch() =~ /ppc/) {
-		$v =~ s/hd:\d+,//g;
-	    }   
-	    push @{$b{entries}}, $e = { type => $_, kernel_or_dev => $v };
-	    $global = 0;
-	} elsif ($global) {
-	    if ($_ eq 'disk' && $v =~ /(\S+)\s+bios\s*=\s*(\S+)/) {
-		$b{bios}{$1} = $2;
-	    } elsif ($_ eq 'bios') {
-		$b{bios}{$b{disk}} = $v;
-	    } elsif ($_ eq 'init-message') {
-		$v =~ s/\\n//g; 
-		$v =~ s/"//g;
-		$b{'init-message'} = $v;
-	    } else {
-		$b{$_} = $v || 1;
-	    }
-	} else {
-	    if ((/map-drive/ .. /to/) && /to/) {
-		$e->{mapdrive}{$e->{'map-drive'}} = $v;
-	    } else {
-		if (arch() =~ /ppc/) {
-		    $v =~ s/hd:\d+,//g;
-		    $v =~ s/"//g;
-		}
-		$e->{$_} = $v || 1;
-	    }
-	}
-    }
-    if (arch() !~ /ppc/) {
-	delete $b{timeout} unless $b{prompt};
-	$_->{append} =~ s/^\s*"?(.*?)"?\s*$/$1/ foreach \%b, @{$b{entries}};
-	$b{timeout} = $b{timeout} / 10 if $b{timeout};
-	$b{message} = cat_("$prefix$b{message}") if $b{message};
-    }
-    \%b;
-}
-
-sub suggest_onmbr {
-    my ($hds) = @_;
-    
-    my $type = partition_table_raw::typeOfMBR($hds->[0]{device});
-    !$type || member($type, qw(dos dummy lilo grub empty)), !$type;
-}
-
-sub compare_entries ($$) {
-    my ($a, $b) = @_;
-    my %entries;
-
-    @entries{keys %$a, keys %$b} = ();
-    $a->{$_} eq $b->{$_} and delete $entries{$_} foreach keys %entries;
-    scalar keys %entries;
-}
-
-sub add_entry($$) {
-    my ($entries, $v) = @_;
-    my (%usedold, $freeold);
-
-    do { $usedold{$1 || 0} = 1 if $_->{label} =~ /^old([^_]*)_/ } foreach @$entries;
-    foreach (0..scalar keys %usedold) { exists $usedold{$_} or $freeold = $_ || '', last }
-
-    foreach (@$entries) {
-	if ($_->{label} eq $v->{label}) {
-	    compare_entries($_, $v) or return; #- avoid inserting it twice as another entry already exists !
-	    $_->{label} = "old${freeold}_$_->{label}";
-	}
-    }
-    push @$entries, $v;
-}
-
-sub add_kernel {
-    my ($prefix, $lilo, $version, $ext, $root, $v) = @_;
-
-    #- new versions of yaboot don't handle symlinks
-    my $ppcext = $ext;
-    if (arch() =~ /ppc/) {
-	$ext = "-$version";
-    }
-
-    log::l("adding vmlinuz$ext as vmlinuz-$version");
-    -e "$prefix/boot/vmlinuz-$version" or log::l("unable to find kernel image $prefix/boot/vmlinuz-$version"), return;
-    my $image = "/boot/vmlinuz" . ($ext ne "-$version" &&
-				   symlinkf("vmlinuz-$version", "$prefix/boot/vmlinuz$ext") ? $ext : "-$version");
-    my $initrd = eval { 
-	mkinitrd($prefix, $version, "/boot/initrd-$version.img");
-	"/boot/initrd" . ($ext ne "-$version" &&
-			  symlinkf("initrd-$version.img", "$prefix/boot/initrd$ext.img") ? $ext : "-$version") . ".img";
-    };
-    my $label = $ext =~ /-(default)/ ? $1 : "linux$ext";
-
-    #- more yaboot concessions - PPC
-    if (arch() =~ /ppc/) {
-	$label = $ppcext =~ /-(default)/ ? $1 : "linux$ppcext";
-    }
-
-    add2hash($v,
-	     {
-	      type => 'image',
-	      root => "/dev/$root",
-	      label => $label,
-	      kernel_or_dev => $image,
-	      initrd => $initrd,
-	      append => $lilo->{perImageAppend},
-	     });
-    add_entry($lilo->{entries}, $v);
-    $v;
-}
-
-sub unpack_append {
-    my ($s) = @_;
-    my @l = split(' ', $s);
-    [ grep { !/=/ } @l ], [ map { if_(/(.*?)=(.*)/, [$1, $2]) } @l ];
-}
-sub pack_append {
-    my ($simple, $dict) = @_;
-    join(' ', @$simple, map { "$_->[0]=$_->[1]" } @$dict);
-}
-
-sub append__mem_is_memsize { $_[0] =~ /^\d+[kM]?$/i }
-
-sub get_append {
-    my ($b, $key) = @_;
-    my (undef, $dict) = unpack_append($b->{perImageAppend});
-    my @l = map { $_->[1] } grep { $_->[0] eq $key } @$dict;
-
-    #- suppose we want the memsize
-    @l = grep { append__mem_is_memsize($_) } @l if $key eq 'mem';
-
-    log::l("more than one $key in $b->{perImageAppend}") if @l > 1;
-    $l[0];
-}
-sub add_append {
-    my ($b, $key, $val) = @_;
-
-    foreach (\$b->{perImageAppend}, map { \$_->{append} } grep { $_->{type} eq 'image' } @{$b->{entries}}) {
-	my ($simple, $dict) = unpack_append($$_);
-	@$dict = grep { $_->[0] ne $key || $key eq 'mem' && append__mem_is_memsize($_->[1]) != append__mem_is_memsize($val) } @$dict;
-	push @$dict, [ $key, $val ] if $val;
-	$$_ = pack_append($simple, $dict);
-	log::l("add_append: $$_");
-    }
-}
-sub may_append {
-    my ($b, $key, $val) = @_;
-    add_append($b, $key, $val) if !get_append($b, $key);
-}
-
-sub configure_entry($$) {
-    my ($prefix, $entry) = @_;
-    if ($entry->{type} eq 'image') {
-	my $specific_version;
-	$entry->{kernel_or_dev} =~ /vmlinu.-(.*)/ and $specific_version = $1;
-	readlink("$prefix/$entry->{kernel_or_dev}") =~ /vmlinu.-(.*)/ and $specific_version = $1;
-
-	if ($specific_version) {
-	    $entry->{initrd} or $entry->{initrd} = "/boot/initrd-$specific_version.img";
-	    if (! -e "$prefix/$entry->{initrd}" || $::oem) {
-		eval { mkinitrd($prefix, $specific_version, "$entry->{initrd}") };
-		undef $entry->{initrd} if $@;
-	    }
-	}
-    }
-    $entry;
-}
-
-sub dev2prompath { #- SPARC only
-    my ($dev) = @_;
-    my ($wd, $num) = $dev =~ /^(.*\D)(\d*)$/;
-    require c;
-    $dev = c::disk2PromPath($wd) and $dev = $dev =~ /^sd\(/ ? "$dev$num" : "$dev;$num";
-    $dev;
-}
-
-sub get_kernels_and_labels {
-    my ($prefix) = @_;
-    my $dir = "$prefix/boot";
-    my @l = grep { /^vmlinuz-/ } all($dir);
-    my @kernels = grep { ! -l "$dir/$_" } @l;
-
-    my @preferred = ('', 'secure', 'enterprise', 'smp');
-    my %weights = map_index { $_ => $::i } @preferred;
-    
-    require pkgs;
-    @kernels = 
-      sort { pkgs::versionCompare($b->[1], $a->[1]) || $weights{$a->[2]} <=> $weights{$b->[2]} } 
-      map {
-	  if (my ($version, $ext) = /vmlinuz-((?:[\-.\d]*(?:mdk)?)*)(.*)/) {
-	      [ "$version$ext", $version, $ext ];
-	  } else {
-	      log::l("non recognised kernel name $_");
-	      ();
-	  }
-      } @kernels;
-
-    my %majors;
-    foreach (@kernels) {
-	push @{$majors{$1}}, $_ if $_->[1] =~ /^(2\.\d+)/
-    }
-    while (my ($major, $l) = each %majors) {
-	$l->[0][1] = $major if @$l == 1;
-    }
-
-    my %labels;
-    foreach (@kernels) {
-	my ($complete_version, $version, $ext) = @$_;
-	my $label = '';
-	if (exists $labels{$label}) {
-	    $label = "-$ext";
-	    if (!$ext || $labels{$label}) {
-		$label = "-$version$ext";
-	    }
-	}
-	$labels{$label} = $complete_version;
-    }
-    %labels;
-}
-
-sub suggest {
-    my ($prefix, $lilo, $hds, $fstab, $vga_fb, $quiet) = @_;
-    my $root_part = fsedit::get_root($fstab);
-    my $root = isLoopback($root_part) ? "loop7" : $root_part->{device};
-    my $boot = fsedit::get_root($fstab, 'boot')->{device};
-    my $partition = first($boot =~ /\D*(\d*)/);
-    #- PPC xfs module requires enlarged initrd
-    my $xfsroot = isThisFs("xfs", $root_part);
-
-    require c; c::initSilo() if arch() =~ /sparc/;
-
-    my ($onmbr, $unsafe) = $lilo->{crushMbr} ? (1, 0) : suggest_onmbr($hds);
-    add2hash_($lilo, arch() =~ /sparc/ ?
-	{
-	 entries => [],
-	 timeout => 10,
-	 use_partition => 0, #- we should almost always have a whole disk partition.
-	 root          => "/dev/$root",
-	 partition     => $partition || 1,
-	 boot          => $root eq $boot && "/boot", #- this helps for getting default partition for silo.
-	} : arch() =~ /ppc/ ?
-	{
-	 defaultos => "linux",
-	 entries => [],
-	 'init-message' => "Welcome to Mandrake Linux!",
-	 delay => 30,	#- OpenFirmware delay
-	 timeout => 50,
-	 enableofboot => 1,
-	 enablecdboot => 1,
-	 useboot => $boot,
-	 xfsroot => $xfsroot,
-	} :
-	{
-	 bootUnsafe => $unsafe,
-	 entries => [],
-	 timeout => $onmbr && 10,
-	 nowarn => 1,
-	   if_(arch() !~ /ia64/,
-	 lba32 => 1,
-	 boot => "/dev/" . ($onmbr ? $hds->[0]{device} : fsedit::get_root($fstab, 'boot')->{device}),
-	 map => "/boot/map",
-         ),
-	});
-
-    if (!$lilo->{message} || $lilo->{message} eq "1") {
-	$lilo->{message} = join('', cat_("$prefix/boot/message"));
-	if (!$lilo->{message}) {
-	    my $msg_en =
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-__("Welcome to %s the operating system chooser!
-
-Choose an operating system in the list above or
-wait %d seconds for default boot.
-
-");
-	    my $msg = translate($msg_en);
-	    #- use the english version if more than 20% of 8bits chars
-	    $msg = $msg_en if int(grep { $_ & 0x80 } unpack "c*", $msg) / length($msg) > 0.2;
-	    $lilo->{message} = sprintf $msg, arch() =~ /sparc/ ? "SILO" : "LILO", $lilo->{timeout};
-	}
-    }
-
-    add2hash_($lilo, { memsize => $1 }) if cat_("/proc/cmdline") =~ /\bmem=(\d+[KkMm]?)(?:\s.*)?$/;
-    if (my ($s, $port, $speed) = cat_("/proc/cmdline") =~ /console=(ttyS(\d),(\d+)\S*)/) {
-	log::l("serial console $s $port $speed");
-	add_append($lilo, 'console' => $s);
-	any::set_login_serial_console($prefix, $port, $speed);
-    }
-
-    my %labels = get_kernels_and_labels($prefix);
-    $labels{''} or die "no kernel installed";
-
-    while (my ($ext, $version) = each %labels) {
-	my $entry = add_kernel($prefix, $lilo, $version, $ext, $root,
-	       {
-		if_($vga_fb && $ext eq '', vga => $vga_fb), #- using framebuffer
-	       });
-	$entry->{append} .= " quiet" if $vga_fb && $version !~ /smp|enterprise/ && $quiet;
-
-	if ($vga_fb && $ext eq '') {
-	    add_kernel($prefix, $lilo, $version, $ext, $root, { label => 'linux-nonfb' });
-	}
-    }
-    my $failsafe = add_kernel($prefix, $lilo, $labels{''}, '', $root, { label => 'failsafe' });
-    $failsafe->{append} =~ s/devfs=mount/devfs=nomount/;
-    $failsafe->{append} .= " failsafe";
-
-    if (arch() =~ /sparc/) {
-	#- search for SunOS, it could be a really better approach to take into account
-	#- partition type for mounting point.
-	my $sunos = 0;
-	foreach (@$hds) {
-	    foreach (@{$_->{primary}{normal}}) {
-		my $path = $_->{device} =~ m|^/| && $_->{device} !~ m|^/dev/| ? $_->{device} : dev2prompath($_->{device});
-		add_entry($lilo->{entries},
-			  {
-			   type => 'other',
-			   kernel_or_dev => $path,
-			   label => "sunos"   . ($sunos++ ? $sunos : ''),
-			  }) if $path && isSunOS($_) && type2name($_->{type}) =~ /root/i;
-	    }
-	}
-    } elsif (arch() =~ /ppc/) {
-	#- if we identified a MacOS partition earlier - add it
-	if (defined $partition_table_mac::macos_part) {
-	    add_entry($lilo->{entries},
-		      {
-		       label => "macos",
-		       kernel_or_dev => $partition_table_mac::macos_part
-		      });
-	}
-    } elsif (arch() !~ /ia64/) {
-	#- search for dos (or windows) boot partition. Don't look in extended partitions!
-	my %nbs;
-	foreach (@$hds) {
-	    foreach (@{$_->{primary}{normal}}) {
-		my $label = isNT($_) ? 'NT' : isDos($_) ? 'dos' : 'windows';
-		add_entry($lilo->{entries},
-			  {
-			   type => 'other',
-			   kernel_or_dev => "/dev/$_->{device}",
-			   label => $label . ($nbs{$label}++ ? $nbs{$label} : ''),
-			     if_($_->{device} =~ /[1-4]$/, 
-			   table => "/dev/$_->{rootDevice}"
-				),
-			   unsafe => 1
-			  }) if isNT($_) || isFat($_) && isFat({ type => fsedit::typeOfPart($_->{device}) });
-	    }
-	}
-    }
-    foreach ('secure', 'enterprise', 'smp') {
-	if (get_label("linux-$_", $lilo)) {
-	    $lilo->{default} ||= "linux-$_";
-	    last;
-	}
-    }
-    $lilo->{default} ||= "linux";
-
-    my %l = (
-	     yaboot => to_bool(arch() =~ /ppc/),
-	     silo => to_bool(arch() =~ /sparc/),
-	     lilo => to_bool(arch() !~ /sparc|ppc/) && !isLoopback(fsedit::get_root($fstab)),
-	     grub => to_bool(arch() !~ /sparc|ppc/ && !isRAID(fsedit::get_root($fstab))),
-	     loadlin => to_bool(arch() !~ /sparc|ppc/) && -e "/initrd/loopfs/lnx4win",
-	    );
-    unless ($lilo->{methods}) {
-	$lilo->{methods} ||= { map { $_ => 1 } grep { $l{$_} } keys %l };
-	if ($lilo->{methods}{lilo} && -e "$prefix/boot/message-graphic") {
-	    $lilo->{methods}{lilo} = "lilo-graphic";
-	    exists $lilo->{methods}{grub} and $lilo->{methods}{grub} = undef;
-	}
-    }
-}
-
-sub suggest_floppy {
-    my ($bootloader) = @_;
-
-    my $floppy = detect_devices::floppy() or return;
-    $floppy eq 'fd0' or log::l("suggest_floppy: not adding $floppy"), return;
-
-    add_entry($bootloader->{entries},
-      {
-       type => 'other',
-       kernel_or_dev => '/dev/fd0',
-       label => 'floppy',
-       unsafe => 1
-      });
-}
-
-sub keytable($$) {
-    my ($prefix, $f) = @_;
-    local $_ = $f;
-    if ($_ && !/\.klt$/) {
-	$f = "/boot/$_.klt";
-	run_program::rooted($prefix, "keytab-lilo.pl", ">", $f, $_) or undef $f;
-    }
-    $f && -r "$prefix/$f" && $f;
-}
-
-sub has_profiles { to_bool(get_label("office", $b)) }
-sub set_profiles {
-    my ($b, $want_profiles) = @_;
-
-    my $office = get_label("office", $b);
-    if ($want_profiles xor $office) {
-	my $e = get_label("linux", $b);
-	if ($want_profiles) {
-	    push @{$b->{entries}}, { %$e, label => "office", append => "$e->{append} prof=Office" };
-	    $e->{append} .= " prof=Home";
-	} else {
-	    # remove profiles
-	    $e->{append} =~ s/\s*prof=\w+//;
-	    @{$b->{entries}} = grep { $_ != $office } @{$b->{entries}};
-	}
-    }
-
-}
-
-sub get_of_dev($$) {
-	my ($prefix, $unix_dev) = @_;
-	#- don't care much for this - need to run ofpath rooted, and I need the result
-	#- In test mode, just run on "/", otherwise you can't get to the /proc files		
-	if ($::testing) {
-		$prefix = "";
-	}
-	run_program::rooted_or_die($prefix, "/usr/local/sbin/ofpath $unix_dev", ">", "/tmp/ofpath");
-	open(FILE, "$prefix/tmp/ofpath") || die "Can't open $prefix/tmp/ofpath";
-	my $of_dev = "";
-	local $_ = "";
-	while (<FILE>){
-		$of_dev = $_;
-	}
-	chop($of_dev);
-	my @del_file = ($prefix . "/tmp/ofpath");
-	unlink (@del_file);
-	log::l("OF Device: $of_dev");
-	$of_dev;
-}
-
-sub install_yaboot($$$) {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-    $lilo->{prompt} = $lilo->{timeout};
-
-    if ($lilo->{message}) {
-	local *F;
-	open F, ">$prefix/boot/message" and print F $lilo->{message} or $lilo->{message} = 0;
-    }
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = "$prefix/etc/yaboot.conf";
-	open F, ">$f" or die "cannot create yaboot config file: $f";
-	log::l("writing yaboot config to $f");
-
-	print F "#yaboot.conf - generated by DrakX";
-	print F "init-message=\"\\n$lilo->{'init-message'}\\n\"" if $lilo->{'init-message'};
-
-	if ($lilo->{boot}) {
-	    print F "boot=$lilo->{boot}";
-	    my $of_dev = get_of_dev($prefix, $lilo->{boot});
-	    print F "ofboot=$of_dev";
-	} else {
-	    die "no bootstrap partition defined."
-	}
-	
-	$lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(delay timeout);
-	print F "install=/usr/local/lib/yaboot/yaboot";
-	print F "magicboot=/usr/local/lib/yaboot/ofboot";
-	$lilo->{$_} and print F $_ foreach qw(enablecdboot enableofboot);
-	$lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(defaultos default);
-	#- print F "nonvram";
-	my $boot = "/dev/" . $lilo->{useboot} if $lilo->{useboot};
-		
-	foreach (@{$lilo->{entries}}) {
-
-	    if ($_->{type} eq "image") {
-		my $of_dev = '';
-		if (($boot !~ /$_->{root}/) && $boot) {
-		    $of_dev = get_of_dev($prefix, $boot);
-		    print F "$_->{type}=$of_dev," . substr($_->{kernel_or_dev}, 5);
-		} else {
-		    $of_dev = get_of_dev($prefix, $_->{root});    			
-		    print F "$_->{type}=$of_dev,$_->{kernel_or_dev}";
-		}
-		print F "\tlabel=", substr($_->{label}, 0, 15); #- lilo doesn't handle more than 15 char long labels
-		print F "\troot=$_->{root}";
-		if (($boot !~ /$_->{root}/) && $boot) {
-		    print F "\tinitrd=$of_dev," . substr($_->{initrd}, 5) if $_->{initrd};
-		} else {
-		    print F "\tinitrd=$of_dev,$_->{initrd}" if $_->{initrd};
-		}
-		#- xfs module on PPC requires larger initrd - say 6MB?
-		print F "\tinitrd-size=6144" if $lilo->{xfsroot};
-		print F "\tappend=\" $_->{append}\"" if $_->{append};
-		print F "\tread-write" if $_->{'read-write'};
-		print F "\tread-only" if !$_->{'read-write'};
-	    } else {
-		my $of_dev = get_of_dev($prefix, $_->{kernel_or_dev});
-		print F "$_->{label}=$of_dev";		
-	    }
-	}
-    }
-    log::l("Installing boot loader...");
-    my $f = "$prefix/tmp/of_boot_dev";
-    my $of_dev = get_of_dev($prefix, $lilo->{boot});
-    output($f, "$of_dev\n");  
-    $::testing and return;
-    if (defined $install_steps_interactive::new_bootstrap) {
-	run_program::run("hformat", "$lilo->{boot}") or die "hformat failed";
-    }	
-    run_program::rooted_or_die($prefix, "/sbin/ybin", "2>", "/tmp/.error");
-    unlink "$prefix/tmp/.error";	
-}
-
-sub install_silo($$$) {
-    my ($prefix, $silo, $fstab) = @_;
-    my $boot = fsedit::get_root($fstab, 'boot')->{device};
-    my ($wd, $num) = $boot =~ /^(.*\D)(\d*)$/;
-
-    #- setup boot promvars for.
-    require c;
-    if ($boot =~ /^md/) {
-	#- get all mbr devices according to /boot are listed,
-	#- then join all zero based partition translated to prom with ';'.
-	#- keep bootdev with the first of above.
-	log::l("/boot is present on raid partition which is not currently supported for promvars");
-    } else {
-	if (!$silo->{use_partition}) {
-	    foreach (@$fstab) {
-		if (!$_->{start} && $_->{device} =~ /$wd/) {
-		    $boot = $_->{device};
-		    log::l("found a zero based partition in $wd as $boot");
-		    last;
-		}
-	    }
-	}
-	$silo->{bootalias} = c::disk2PromPath($boot);
-	$silo->{bootdev} = $silo->{bootalias};
-        log::l("preparing promvars for device=$boot");
-    }
-    c::hasAliases() or log::l("clearing promvars alias as non supported"), $silo->{bootalias} = '';
-
-    if ($silo->{message}) {
-	local *F;
-	open F, ">$prefix/boot/message" and print F $silo->{message} or $silo->{message} = 0;
-    }
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = "$prefix/boot/silo.conf"; #- always write the silo.conf file in /boot ...
-	symlinkf "../boot/silo.conf", "$prefix/etc/silo.conf"; #- ... and make a symlink from /etc.
-	open F, ">$f" or die "cannot create silo config file: $f";
-	log::l("writing silo config to $f");
-
-	$silo->{$_} and print F "$_=$silo->{$_}" foreach qw(partition root default append);
-	$silo->{$_} and print F $_ foreach qw(restricted);
-	print F "password=", $silo->{password} if $silo->{restricted} && $silo->{password}; #- also done by msec
-	print F "timeout=", round(10 * $silo->{timeout}) if $silo->{timeout};
-	print F "message=$silo->{boot}/message" if $silo->{message};
-
-	foreach (@{$silo->{entries}}) {#my ($v, $e) = each %{$silo->{entries}}) {
-	    my $type = "$_->{type}=$_->{kernel_or_dev}"; $type =~ s|/boot|$silo->{boot}|;
-	    print F $type;
-	    print F "\tlabel=$_->{label}";
-
-	    if ($_->{type} eq "image") {
-		my $initrd = $_->{initrd}; $initrd =~ s|/boot|$silo->{boot}|;
-		print F "\tpartition=$_->{partition}" if $_->{partition};
-		print F "\troot=$_->{root}" if $_->{root};
-		print F "\tinitrd=$initrd" if $_->{initrd};
-		print F "\tappend=\"$1\"" if $_->{append} =~ /^\s*"?(.*?)"?\s*$/;
-		print F "\tread-write" if $_->{'read-write'};
-		print F "\tread-only" if !$_->{'read-write'};
-	    }
-	}
-    }
-    log::l("Installing boot loader...");
-    $::testing and return;
-    run_program::rooted($prefix, "silo", "2>", "/tmp/.error", $silo->{use_partition} ? ("-t") : ()) or 
-        run_program::rooted_or_die($prefix, "silo", "2>", "/tmp/.error", "-p", "2", $silo->{use_partition} ? ("-t") : ());
-    unlink "$prefix/tmp/.error";
-
-    #- try writing in the prom.
-    log::l("setting promvars alias=$silo->{bootalias} bootdev=$silo->{bootdev}");
-    require c;
-    c::setPromVars($silo->{bootalias}, $silo->{bootdev});
-}
-
-sub make_label_lilo_compatible {
-    my ($label) = @_; 
-    $label = substr($label, 0, 15); #- lilo doesn't handle more than 15 char long labels
-    $label =~ s/\s/_/g; #- lilo doesn't like spaces
-    $label;
-}
-
-sub write_lilo_conf {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-    $lilo->{prompt} = $lilo->{timeout};
-
-    delete $lilo->{linear} if $lilo->{lba32};
-
-    my $file2fullname = sub {
-	my ($file) = @_;
-	if (arch() =~ /ia64/) {
-	    (my $part, $file) = fsedit::file2part($prefix, $fstab, $file);
-	    my %hds = map_index { $_ => "hd$::i" } map { $_->{device} } 
-	      sort { isFat($b) <=> isFat($a) || $a->{device} cmp $b->{device} } fsedit::get_fstab(@$hds);
-	    %hds->{$part->{device}} . ":" . $file;
-	} else {
-	    $file
-	}
-    };
-
-    my %bios2dev = map_index { $::i => $_ } dev2bios($hds, $lilo->{first_hd_device} || $lilo->{boot});
-    my %dev2bios = reverse %bios2dev;
-
-    if (is_empty_hash_ref($lilo->{bios} ||= {})) {
-	my $dev = $hds->[0]{device};
-	if ($dev2bios{$dev}) {
-	    log::l("Since we're booting on $bios2dev{0}, make it bios=0x80, whereas $dev is now " . (0x80 + $dev2bios{$dev}));
-	    $lilo->{bios}{"/dev/$bios2dev{0}"} = '0x80';
-	    $lilo->{bios}{"/dev/$dev"} = sprintf("0x%x", 0x80 + $dev2bios{$dev});
-	}
-	foreach (0 .. 3) {
-	    my ($letter) = $bios2dev{$_} =~ /hd([^ac])/; #- at least hda and hdc are handled correctly :-/
-	    next if $lilo->{bios}{"/dev/$bios2dev{$_}"} || !$letter;
-	    next if 
-	      $_ > 0	     #- always print if first disk is hdb, hdd, hde...
-		&& $bios2dev{$_ - 1} eq "hd" . chr(ord($letter) - 1);
-	    #- no need to help lilo with hdb (resp. hdd, hdf...)
-	    log::l("Helping lilo: $bios2dev{$_} must be " . (0x80 + $_));
-	    $lilo->{bios}{"/dev/$bios2dev{$_}"} = sprintf("0x%x", 0x80 + $_);
-	}
-    }
-
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = arch() =~ /ia64/ ? "$prefix/boot/efi/elilo.conf" : "$prefix/etc/lilo.conf";
-
-	open F, ">$f" or die "cannot create lilo config file: $f";
-	log::l("writing lilo config to $f");
-
-	chmod 0600, $f if $lilo->{password};
-
-	#- normalize: RESTRICTED is only valid if PASSWORD is set
-	delete $lilo->{restricted} if !$lilo->{password};
-
-	local $lilo->{default} = make_label_lilo_compatible($lilo->{default});
-	$lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(boot map install vga default keytable);
-	$lilo->{$_} and print F $_ foreach qw(linear lba32 compact prompt nowarn restricted);
-	print F "append=\"$lilo->{append}\"" if $lilo->{append};
- 	print F "password=", $lilo->{password} if $lilo->{password}; #- also done by msec
-	print F "timeout=", round(10 * $lilo->{timeout}) if $lilo->{timeout};
-	print F "serial=", $1 if get_append($lilo, 'console') =~ /ttyS(.*)/;
-
-	print F "message=/boot/message" if (arch() !~ /ia64/);
-	print F "menu-scheme=wb:bw:wb:bw" if (arch() !~ /ia64/);
-
-	print F "ignore-table" if grep { $_->{unsafe} && $_->{table} } @{$lilo->{entries}};
-
-	while (my ($dev, $bios) = each %{$lilo->{bios}}) {
-	    print F "disk=$dev bios=$bios";
-	}
-
-	foreach (@{$lilo->{entries}}) {
-	    print F "$_->{type}=", $file2fullname->($_->{kernel_or_dev});
-	    print F "\tlabel=", make_label_lilo_compatible($_->{label});
-
-	    if ($_->{type} eq "image") {		
-		print F "\troot=$_->{root}" if $_->{root};
-		print F "\tinitrd=", $file2fullname->($_->{initrd}) if $_->{initrd};
-		print F "\tappend=\"$_->{append}\"" if $_->{append};
-		print F "\tvga=$_->{vga}" if $_->{vga};
-		print F "\tread-write" if $_->{'read-write'};
-		print F "\tread-only" if !$_->{'read-write'};
-	    } else {
-		print F "\ttable=$_->{table}" if $_->{table};
-		print F "\tunsafe" if $_->{unsafe} && !$_->{table};
-		
-		if (my ($dev) = $_->{table} =~ m|/dev/(.*)|) {
-		    if ($dev2bios{$dev}) {
-			#- boot off the nth drive, so reverse the BIOS maps
-			my $nb = sprintf("0x%x", 0x80 + $dev2bios{$dev});
-			$_->{mapdrive} ||= { '0x80' => $nb, $nb => '0x80' }; 
-		    }
-		}
-		while (my ($from, $to) = each %{$_->{mapdrive} || {}}) {
-		    print F "\tmap-drive=$from";
-		    print F "\t   to=$to";
-		}
-	    }
-	}
-    }
-}
-
-sub install_lilo {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-
-    $lilo->{install} = 'text' if $lilo->{methods}{lilo} eq 'lilo-text';
-    output("$prefix/boot/message-text", $lilo->{message}) if $lilo->{message};
-    symlinkf "message-" . ($lilo->{methods}{lilo} eq 'lilo-graphic' ? 'graphic' : 'text'), "$prefix/boot/message";
-
-    write_lilo_conf($prefix, $lilo, $fstab, $hds);
-
-    log::l("Installing boot loader...");
-    $::testing and return;
-    run_program::rooted_or_die($prefix, "lilo", "2>", "/tmp/.error") if (arch() !~ /ia64/);
-    unlink "$prefix/tmp/.error";
-}
-
-sub dev2bios {
-    my ($hds, $where) = @_;
-    $where =~ s|/dev/||;
-    my @dev = map { $_->{device} } @$hds;
-    member($where, @dev) or ($where) = @dev; #- if not on mbr, 
-
-    s/h(d[e-g])/x$1/ foreach $where, @dev; #- emulates ultra66 as xd_
-
-    my $start = substr($where, 0, 2);
-
-    my $translate = sub {
-	$_ eq $where ? "aaa" : #- if exact match, value it first
-	  /^$start(.*)/ ? "ad$1" : #- if same class (ide/scsi/ultra66), value it before other classes
-	    $_;
-    };
-    @dev = map { $_->[0] }
-           sort { $a->[1] cmp $b->[1] }
-	   map { [ $_, &$translate ] } @dev;
-
-    s/x(d.)/h$1/ foreach @dev; #- switch back;
-
-    @dev;
-}
-
-sub dev2grub {
-    my ($dev, $dev2bios) = @_;
-    $dev =~ m|^(/dev/)?(...)(.*)$| or die "dev2grub (bad device $dev), caller is " . join(":", caller());
-    my $grub = $dev2bios->{$2} or die "dev2grub ($2)";
-    "($grub" . ($3 && "," . ($3 - 1)) . ")";
-}
-
-sub write_grub_config {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-    my %dev2bios = (
-      (map_index { $_ => "fd$::i" } detect_devices::floppies_dev()),
-      (map_index { $_ => "hd$::i" } dev2bios($hds, $lilo->{first_hd_device} || $lilo->{boot})),
-    );
-
-    {
-	my %bios2dev = reverse %dev2bios;
-	output "$prefix/boot/grub/device.map", 
-	  join '', map { "($_) /dev/$bios2dev{$_}\n" } sort keys %bios2dev;
-    }
-    my $bootIsReiser = isThisFs("reiserfs", fsedit::get_root($fstab, 'boot'));
-    my $file2grub = sub {
-	my ($part, $file) = fsedit::file2part($prefix, $fstab, $_[0], 'keep_simple_symlinks');
-	dev2grub($part->{device}, \%dev2bios) . $file;
-    };
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = "$prefix/boot/grub/menu.lst";
-	open F, ">$f" or die "cannot create grub config file: $f";
-	log::l("writing grub config to $f");
-
-	$lilo->{$_} and print F "$_ $lilo->{$_}" foreach qw(timeout);
-
-	print F "color black/cyan yellow/cyan";
-	print F "i18n ", $file2grub->("/boot/grub/messages");
-	print F "keytable ", $file2grub->($lilo->{keytable}) if $lilo->{keytable};
-	print F "serial --unit=$1 --speed=$2\nterminal --timeout=" . ($lilo->{timeout} || 0) . " console serial" if get_append($lilo, 'console') =~ /ttyS(\d),(\d+)/;
-
-	#- since we use notail in reiserfs, altconfigfile is broken :-(
-	unless ($bootIsReiser) {
-	    print F "altconfigfile ", $file2grub->(my $once = "/boot/grub/menu.once");
-	    output "$prefix$once", " " x 100;
-	}
-
-	map_index {
-	    print F "default $::i" if $_->{label} eq $lilo->{default};
-	} @{$lilo->{entries}};
-
-	foreach (@{$lilo->{entries}}) {
-	    print F "\ntitle $_->{label}";
-
-	    if ($_->{type} eq "image") {
-		my $vga = $_->{vga} || $lilo->{vga};
-		printf F "kernel %s root=%s %s%s%s\n",
-		  $file2grub->($_->{kernel_or_dev}),
-		  $_->{root} =~ /loop7/ ? "707" : $_->{root}, #- special to workaround bug in kernel (see #ifdef CONFIG_BLK_DEV_LOOP)
-		  $_->{append},
-		  $_->{'read-write'} && " rw",
-		  $vga && $vga ne "normal" && " vga=$vga";
-		print F "initrd ", $file2grub->($_->{initrd}) if $_->{initrd};
-	    } else {
-		print F "root ", dev2grub($_->{kernel_or_dev}, \%dev2bios);
-		if ($_->{kernel_or_dev} !~ /fd/) {
-		    #- boot off the second drive, so reverse the BIOS maps
-		    $_->{mapdrive} ||= { '0x80' => '0x81', '0x81' => '0x80' } 
-		      if $_->{table} && ($lilo->{first_hd_device} || $lilo->{boot}) !~ /$_->{table}/;
-	    
-		    map_each { print F "map ($::b) ($::a)" } %{$_->{mapdrive} || {}};
-
-		    print F "makeactive";
-		}
-		print F "chainloader +1";
-	    }
-	}
-    }
-    my $hd = fsedit::get_root($fstab, 'boot')->{rootDevice};
-
-    my $dev = dev2grub($lilo->{first_hd_device} || $lilo->{boot}, \%dev2bios);
-    my ($s1, $s2, $m) = map { $file2grub->("/boot/grub/$_") } qw(stage1 stage2 menu.lst);
-    my $f = "/boot/grub/install.sh";
-    output "$prefix$f",
-"grub --device-map=/boot/grub/device.map --batch <<EOF
-install $s1 d $dev $s2 p $m
-quit
-EOF
-";
-
-     output "$prefix/boot/grub/messages", map { substr(translate($_) . "\n", 0, 78) } ( #- ensure the translated messages are not too big the hard way
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Welcome to GRUB the operating system chooser!"),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Use the %c and %c keys for selecting which entry is highlighted."),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Press enter to boot the selected OS, \'e\' to edit the"),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("commands before booting, or \'c\' for a command-line."),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("The highlighted entry will be booted automatically in %d seconds."),
-);
-   
-    my $e = "$prefix/boot/.enough_space";
-    output $e, 1; -s $e or die _("not enough room in /boot");
-    unlink $e;
-    $f;
-}
-
-sub install_grub {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-
-    my $f = write_grub_config($prefix, $lilo, $fstab, $hds);
-
-    log::l("Installing boot loader...");
-    $::testing and return;
-    symlink "$prefix/boot", "/boot";
-    run_program::run_or_die("sh", $f);
-    unlink "$prefix/tmp/.error.grub", "/boot";
-}
-
-sub lnx4win_file { 
-    my $lilo = shift;
-    map { local $_ = $_; s,/,\\,g; "$lilo->{boot_drive}:\\lnx4win$_" } @_;
-}
-
-sub loadlin_cmd {
-    my ($prefix, $lilo) = @_;
-    my $e = get_label("linux", $lilo) || first(grep { $_->{type} eq "image" } @{$lilo->{entries}});
-
-    cp_af("$prefix$e->{kernel_or_dev}", "$prefix/boot/vmlinuz") unless -e "$prefix/boot/vmlinuz";
-    cp_af("$prefix$e->{initrd}", "$prefix/boot/initrd.img") unless -e "$prefix/boot/initrd.img";
-
-    $e->{label}, sprintf"%s %s initrd=%s root=%s $e->{append}", 
-      lnx4win_file($lilo, "/loadlin.exe", "/boot/vmlinuz", "/boot/initrd.img"),
-	$e->{root} =~ /loop7/ ? "0707" : $e->{root}; #- special to workaround bug in kernel (see #ifdef CONFIG_BLK_DEV_LOOP)
-}
-
-sub install_loadlin {
-    my ($prefix, $lilo, $fstab) = @_;
-
-    my $boot;
-    ($boot) = grep { $lilo->{boot} eq "/dev/$_->{device}" } @$fstab;
-    ($boot) = grep { loopback::carryRootLoopback($_) } @$fstab unless $boot && $boot->{device_windobe};
-    ($boot) = grep { isFat($_) } @$fstab unless $boot && $boot->{device_windobe};
-    log::l("loadlin device is $boot->{device} (windobe $boot->{device_windobe})");
-    $lilo->{boot_drive} = $boot->{device_windobe};
-
-    my ($winpart) = grep { $_->{device_windobe} eq 'C' } @$fstab;
-    log::l("winpart is $winpart->{device}");
-    my $winhandle = any::inspect($winpart, $prefix, 'rw');
-    my $windrive = $winhandle->{dir};
-    log::l("windrive is $windrive");
-
-    my ($label, $cmd) = loadlin_cmd($prefix, $lilo);
-
-    #install_loadlin_config_sys($lilo, $windrive, $label, $cmd);
-    #install_loadlin_desktop($lilo, $windrive);
-
-    output "/initrd/loopfs/lnx4win/linux.bat", unix2dos(
-'@echo off
-echo Mandrake Linux
-smartdrv /C
-' . "$cmd\n");
-
-}
-
-sub install_loadlin_config_sys {
-    my ($lilo, $windrive, $label, $cmd) = @_;
-
-    my $config_sys = "$windrive/config.sys";
-    local $_ = cat_($config_sys);
-    output "$windrive/config.mdk", $_ if $_;
-    
-    my $timeout = $lilo->{timeout} || 1;
-
-    $_ = "
-[Menu]
-menuitem=Windows
-menudefault=Windows,$timeout
-
-[Windows]
-" . $_ if !/^\Q[Menu]/m;
-
-    #- remove existing entry
-    s/^menuitem=$label\s*//mi;    
-    s/\n\[$label\].*?(\n\[|$)/$1/si;
-
-    #- add entry
-    s/(.*\nmenuitem=[^\n]*)/$1\nmenuitem=$label/s;
-
-    $_ .= "
-[$label]
-shell=$cmd
-";
-    output $config_sys, unix2dos($_);
-}
-
-sub install_loadlin_desktop {
-    my ($lilo, $windrive) = @_;
-    my $windir = lc(cat_("$windrive/msdos.sys") =~ /^WinDir=.:\\(\S+)/m ? $1 : "windows");
-
-#-PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#-PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-    foreach (__("Desktop"),
-#-PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows 
-	     __("Start Menu")) {
-        my $d = "$windrive/$windir/" . translate($_);
-        -d $d or $d = "$windrive/$windir/$_";
-        -d $d or log::l("can't find windows $d directory"), next;
-        output "$d/Linux4Win.url", unix2dos(sprintf 
-q([InternetShortcut]
-URL=file:\lnx4win\lnx4win.exe
-WorkingDirectory=%s
-IconFile=%s
-IconIndex=0
-), lnx4win_file($lilo, "/", "/lnx4win.ico"));
-    }
-}
-
-
-sub install {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-
-    if (my ($p) = grep { $lilo->{boot} =~ /\Q$_->{device}/ } @$fstab) {
-	die _("You can't install the bootloader on a %s partition\n", partition_table::type2fs($p))
-	  if isThisFs('xfs', $p);
-    }
-    $lilo->{keytable} = keytable($prefix, $lilo->{keytable});
-
-    if (exists $lilo->{methods}{grub}) {
-	#- when lilo is selected, we don't try to install grub. 
-	#- just create the config file in case it may be useful
-	eval { write_grub_config($prefix, $lilo, $fstab, $hds) };
-    }
-
-    my %l = grep_each { $::b } %{$lilo->{methods}};
-    my @rcs = map {
-	c::is_secure_file('/tmp/.error') or die "can't ensure a safe /tmp/.error";
-	my $f = $bootloader::{"install_$_"} or die "unknown bootloader method $_";
-	eval { $f->(@_) };
-	$@;
-    } reverse sort keys %l; #- reverse sort for having grub installed after lilo if both are there.
-    
-    return if grep { !$_ } @rcs; #- at least one worked?
-    die first(map { $_ } @rcs);
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/bootlook.pm b/perl-install/bootlook.pm
deleted file mode 100644
index 8747db249..000000000
--- a/perl-install/bootlook.pm
+++ /dev/null
@@ -1,321 +0,0 @@
-#!/usr/bin/perl -w
-
-# Control-center
-
-# Copyright (C) 2001 MandrakeSoft
-# Yves Duret <yduret at mandrakesoft.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-
-use MDK::Common;
-use Gtk;
-use Config;
-init Gtk;
-use POSIX;
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-use standalone;
-use any;
-use bootloader;
-use fs;
-use my_gtk qw(:helpers :wrappers :ask);
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~/--embedded (\S*) (\S*)/;
-if ($::isEmbedded) {
-  print "EMBED\n";
-  print "XID : $::XID\n";
-  print "CCPID :  $::CCPID\n";
-}
-
-my $in = 'interactive'->vnew('su', 'default');
-local $_ = join '', @ARGV;
-
-/-h/ and die _("no help implemented yet.\n");
-/-version/ and die 'version: $Id$'."\n";
-
-my @winm;
-my @usernames;
-parse_etc_passwd();
-
-my $x_mode = isXlaunched();
-my $a_mode = (-e "/etc/aurora/Monitor") ? 1 : 0;
-my $l_mode = isAutologin();
-my %auto_mode = get_autologin("");
-my $inmain = 0;
-my $lilogrub = chomp_(`detectloader -q`);
-
-my $window = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window ("toplevel");
-$window->signal_connect(delete_event => sub { $::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0) });
-$window->set_title(_("Boot Style Configuration") );
-$window->border_width(2);
-#$window->realize;
-
-# drakX mode
-my ($t_pixmap, $t_mask) = gtkcreate_png("tradi.png");
-my ($h_pixmap, $h_mask) = gtkcreate_png("hori.png");
-my ($v_pixmap, $v_mask) = gtkcreate_png("verti.png");
-my ($g_pixmap, $g_mask) = gtkcreate_png("gmon.png");
-my ($c_pixmap, $c_mask) = gtkcreate_png("categ.png");
-
-# a pixmap widget to contain the pixmap
-my $pixmap = new Gtk::Pixmap($h_pixmap, $h_mask);
-
-### menus definition
-# the menus are not shown
-# but they provides shiny shortcut like C-q
-my @menu_items = ( { path => _("/_File"), type => '<Branch>' },
-		   { path => _("/File/_Quit"), accelerator => _("<control>Q"), callback    => sub { $::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0) } },
-		 );
-my $menubar = get_main_menu( $window );
-######### menus end
-
-my $user_combo = new Gtk::Combo;
-$user_combo->set_popdown_strings(@usernames);
-$user_combo->entry->set_text($auto_mode{autologin}) if ($auto_mode{autologin});
-my $desktop_combo =new Gtk::Combo;
-$desktop_combo->set_popdown_strings(get_wm());
-$desktop_combo->entry->set_text($auto_mode{desktop}) if ($auto_mode{desktop});
-my $a_c_button = new Gtk::RadioButton (_("NewStyle Categorizing Monitor"));
-my $a_h_button = new Gtk::RadioButton _("NewStyle Monitor"), $a_c_button;
-my $a_v_button = new Gtk::RadioButton _("Traditional Monitor"), $a_c_button;
-my $a_g_button = new Gtk::RadioButton _("Traditional Gtk+ Monitor"),$a_c_button ;
-my $a_button = new Gtk::CheckButton(_("Launch Aurora at boot time"));
-my $a_box = new Gtk::VBox(0, 0);
-my $x_box = new Gtk::VBox(0, 0);
-my $disp_mode = arch() =~ /ppc/ ? _("Yaboot mode") : _("Lilo/grub mode");
-gtkadd($window,
-       gtkpack__ (my $global_vbox = new Gtk::VBox(0,0),
-		  gtkadd (new Gtk::Frame ("$disp_mode"),
-#			  gtkpack__(new Gtk::VBox(0,0),
-				    (gtkpack_(gtkset_border_width(new Gtk::HBox(0, 0),5),
-					      1,_("You are currently using %s as your boot manager.
-Click on Configure to launch the setup wizard.", $lilogrub),
-					      0,gtksignal_connect(new Gtk::Button (_("Configure")), clicked => $::lilo_choice),
-					     )),
-#				    "" #we need some place under the button -- replaced by gtkset_border_width( for the moment
-#				   )
-				     
-			 ),
-		  # aurora
-# 		  gtkadd (new Gtk::Frame (_("Boot mode")),
-# 			  gtkpack__ (new Gtk::HBox(0,0),
-# 				     gtkpack__ (new Gtk::VBox(0, 5),
-# 						gtksignal_connect ($a_button, clicked => sub {
-# 								       if ($inmain) {
-# 									   $a_box->set_sensitive(!$a_mode);
-# 									   $a_mode = !$a_mode;
-# 									   if ($a_mode) {
-# 									       $pixmap->set($c_pixmap, $c_mask) if $a_c_button->get_active();
-# 									       $pixmap->set($h_pixmap, $h_mask) if $a_h_button->get_active();
-# 									       $pixmap->set($v_pixmap, $v_mask) if $a_v_button->get_active();
-# 									       $pixmap->set($g_pixmap, $g_mask) if $a_g_button->get_active();
-# 									   } else {
-# 									       $pixmap->set($t_pixmap, $t_mask);
-# 									   }
-# 										   }
-# 								   }),
-# 						gtkpack__ ( gtkset_sensitive ($a_box, $a_mode),
-# 							    gtksignal_connect ($a_c_button,clicked => sub{$pixmap->set($c_pixmap, $c_mask)}),
-# 							    gtksignal_connect ($a_h_button,clicked => sub{$pixmap->set($h_pixmap, $h_mask)}),
-# 							    gtksignal_connect ($a_v_button,clicked => sub{$pixmap->set($v_pixmap, $v_mask)}),
-# 							    gtksignal_connect ($a_g_button,clicked => sub{$pixmap->set($g_pixmap, $g_mask)})
-# 							  )
-# 					      ),
-# 				     gtkpack__ (new Gtk::HBox(0,0), $pixmap)
-# 				    )
-# 			 ),
-		  # X
-		  gtkadd (new Gtk::Frame (_("System mode")),
-			  gtkpack__ (new Gtk::VBox(0, 5),
-				     gtksignal_connect(gtkset_active(new Gtk::CheckButton (_("Launch the graphical environment when your system starts")), $x_mode ), clicked => sub {
-							   $x_box->set_sensitive(!$x_mode);
-							   $x_mode = !$x_mode;
-						       }),
-				     gtkpack__ (gtkset_sensitive ($x_box, $x_mode),
-						gtkset_active($x_no_button  = new Gtk::RadioButton (_("No, I don't want autologin")), !$l_mode),
-						gtkpack__ (new Gtk::HBox(0, 10),
-							   gtkset_active($x_yes_button = new Gtk::RadioButton((_("Yes, I want autologin with this (user, desktop)")), $x_no_button), $l_mode),
-							   gtkpack__ (new Gtk::VBox(0, 10),
-								      $user_combo,
-								      $desktop_combo
-								     )
-							  )
-					       )
-				    )
-			 ),
-		 gtkadd (gtkset_layout(new Gtk::HButtonBox,-end),
-			 gtksignal_connect(new Gtk::Button (_("OK")), clicked=>sub{updateInit();updateAutologin();updateAurora();$::isEmbedded ? kill(USR1,$::CCPID) : Gtk->exit(0)}),
-			 gtksignal_connect(new Gtk::Button (_("Cancel")), clicked => sub {$::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0)})
-			)
-	       )
-      );
-
-$a_button->set_active($a_mode); # up == false == "0"
-if ($a_mode) {
-    my $a = readlink "/etc/aurora/Monitor";
-    $a =~ s#/lib/aurora/Monitors/##;
-    if ($a eq "NewStyle-Categorizing-WsLib") {$a_c_button->set_active(1);  $pixmap->set($c_pixmap, $c_mask);}
-    if ($a eq "NewStyle-WsLib") {$a_h_button->set_active(1);  $pixmap->set($h_pixmap, $h_mask);}
-    if ($a eq "Traditional-WsLib") {$a_v_button->set_active(1); $pixmap->set($v_pixmap, $v_mask);}  
-    if ($a eq "Traditional-Gtk+") {$a_g_button->set_active(1); $pixmap->set($g_pixmap, $g_mask);}
-} else {
-    $pixmap->set($t_pixmap, $t_mask);
-}
-
-$window->show_all();
-Gtk->main_iteration while Gtk->events_pending;
-$::isEmbedded and kill USR2, $::CCPID;
-$inmain=1;
-Gtk->main;
-Gtk->exit(0);
-
-#-------------------------------------------------------------
-# get user names to put in combo  
-#-------------------------------------------------------------
-
-sub parse_etc_passwd
-{
-    my ($uname, $uid);
-    setpwent();
-    do {
-	@user_info = getpwent();
-	($uname, $uid) = @user_info[0,2];
-	push (@usernames, $uname) if ($uid > 500) and !($uname eq "nobody");
-    } while (@user_info);
-}
-
-sub get_wm
-{
-    @winm = (split (' ', `/usr/sbin/chksession -l`));
-}
-
-#-------------------------------------------------------------
-# menu callback functions
-#-------------------------------------------------------------
-
-sub print_hello {
-  print( "mcdtg !\n" );
-}
-
-sub get_main_menu {
-  my ( $window ) = @_;
-
-  my $accel_group = new Gtk::AccelGroup();
-  my $item_factory = new Gtk::ItemFactory( 'Gtk::MenuBar', '<main>', $accel_group );
-  $item_factory->create_items( @menu_items );
-  $window->add_accel_group( $accel_group );
-  return ( $item_factory->get_widget( '<main>' ) );
-}
-
-#-------------------------------------------------------------
-# launch X functions
-#-------------------------------------------------------------
-
-sub isXlaunched {
-    my $line;
-    open INITTAB, "/etc/inittab" or die _("can not open /etc/inittab for reading: %s", $!);
-    while (<INITTAB>) {
-	if (/id:([1-6]):initdefault:/) { $line = $_; last; }
-    }
-    close INITTAB;
-    $line =~ s/id:([1-6]):initdefault:/$1/;
-    return ($line-3);
-}
-
-sub updateInit {
-    my $runlevel = ($x_mode) ? 5 : 3;
-    substInFile { s/^id:\d:initdefault:\s*$/id:$runlevel:initdefault:\n/ } "/etc/inittab";
-}
-
-#-------------------------------------------------------------
-# aurora functions
-#-------------------------------------------------------------
-
-
-
-sub updateAurora {
-    if ($a_mode) {
-        if ($a_c_button->get_active()) {
-            symlinkf("/lib/aurora/Monitors/NewStyle-Categorizing-WsLib",    "/etc/aurora/Monitor");
-            $in->do_pkgs->install(q(Aurora-Monitor-NewStyle-Categorizing-WsLib)) if !(-e "/lib/aurora/Monitors/NewStyle-Categorizing-WsLib");
-        }
-        if ($a_h_button->get_active()) {
-            symlinkf("/lib/aurora/Monitors/NewStyle-WsLib",    "/etc/aurora/Monitor");
-            $in->do_pkgs->install(q(Aurora-Monitor-NewStyle-WsLib)) if !(-e "/lib/aurora/Monitors/NewStyle-WsLib");
-        }
-        if ($a_v_button->get_active()) {
-            symlinkf("/lib/aurora/Monitors/Traditional-WsLib", "/etc/aurora/Monitor");
-            $in->do_pkgs->install(q(Aurora-Monitor-Traditional-WsLib)) if !(-e "/lib/aurora/Monitors/Traditional-WsLib");
-        }
-        if ($a_g_button->get_active()) {
-            symlinkf("/lib/aurora/Monitors/Traditional-Gtk+",  "/etc/aurora/Monitor");
-            $in->do_pkgs->install(q(Aurora-Monitor-Traditional-Gtk+)) if !(-e "/lib/aurora/Monitors/Traditional-Gtk+");
-	}
-    } else {
-	unlink "/etc/aurora/Monitor";
-    }
-    
-}
-
-#-------------------------------------------------------------
-# launch autologin functions
-#-------------------------------------------------------------
-
-sub isAutologin {
-    my $line;
-    open AUTOLOGIN, "/etc/sysconfig/autologin";
-    while (<AUTOLOGIN>) {
-	if (/AUTOLOGIN=(yes|no)/) { $line = $_; last; }
-    }
-    close AUTOLOGIN;
-    $line =~ s/AUTOLOGIN=(yes|no)/$1/;
-    chomp ($line);
-    $line =  ($line eq "yes");
-    my %au = get_autologin('');
-    return ($line && defined $au{autologin});
-}
-
-sub get_autologin {
-    my ($prefix) = @_;
-    my %o;
-    my %l = getVarsFromSh("$prefix/etc/sysconfig/autologin");
-
-    $o{autologin} = $l{USER};
-    %l = getVarsFromSh("$prefix/etc/sysconfig/desktop");
-    $o{desktop} = $l{DESKTOP};
-    %o;
-}
-
-sub updateAutologin {
-    my ($usern,$deskt)=($user_combo->entry->get_text(), $desktop_combo->entry->get_text());
-    if ($x_yes_button->get_active()) {
-	$in->do_pkgs->install('autologin') if $x_mode;
-	set_autologin('',$usern,$deskt);
-    } else {
-	set_autologin('',undef) if ($x_no_button->get_active());
-    }
-}
- 
-sub set_autologin {
-  my ($prefix, $user, $desktop) = @_;
-  output "$prefix/etc/sysconfig/desktop", uc($desktop), "\n" if $user;
-  setVarsInSh("$prefix/etc/sysconfig/autologin",
-	      { USER => $user, AUTOLOGIN => bool2yesno($user), EXEC => "/usr/X11R6/bin/startx" });
-  chmod 0600, "$prefix/etc/sysconfig/autologin";
-#  log::l("cat $prefix/etc/sysconfig/autologin: ", cat_("$prefix/etc/sysconfig/autologin"));
-}
-
-
diff --git a/perl-install/c.pm b/perl-install/c.pm
deleted file mode 100644
index aa03b9b1e..000000000
--- a/perl-install/c.pm
+++ /dev/null
@@ -1,19 +0,0 @@
-package c; # $Id$
-
-use vars qw($AUTOLOAD);
-
-use c::stuff;
-use MDK::Common;
-
-sub AUTOLOAD {
-    $AUTOLOAD =~ /::(.*)/;
-    my @l = eval { &{$c::stuff::{$1}} };
-    if (my $err = $@) {
-	$err =~ /Undefined subroutine &main::/ ?
-	  die("can't find function $AUTOLOAD\n" . backtrace()) :
-	  die($err);	
-    }
-    wantarray ? @l : $l[0];
-}
-
-1;
diff --git a/perl-install/c/.cvsignore b/perl-install/c/.cvsignore
deleted file mode 100644
index 665b57e54..000000000
--- a/perl-install/c/.cvsignore
+++ /dev/null
@@ -1,9 +0,0 @@
-Makefile
-Makefile_c
-stuff.c
-stuff.bs
-pm_to_blib
-Makefile_c.old
-blib
-stuff.xs
-pcmcia_probe.c
diff --git a/perl-install/c/Makefile b/perl-install/c/Makefile
deleted file mode 100644
index e58cab335..000000000
--- a/perl-install/c/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-.PHONY: clean
-
-C_RPM = 1
-C_DRAKX = 1
-
-stuff: %: %.xs
-	test -e Makefile_c || C_RPM=$(C_RPM) C_DRAKX=$(C_DRAKX) perl Makefile.PL
-	$(MAKE) -f Makefile_c LD_RUN_PATH=
-	rm -f ../auto/c ; ln -s ../c/blib/arch/auto ../auto/c
-
-clean:
-	test ! -e Makefile_c || $(MAKE) -f Makefile_c clean
-	rm -f *~ *.o stuff.xs pcmcia_probe.c
-
-stuff.xs: %: %.pm
-	rm -f $@
-	C_RPM=$(C_RPM) C_DRAKX=$(C_DRAKX) perl $< > $@
-	chmod a-w $@
diff --git a/perl-install/c/Makefile.PL b/perl-install/c/Makefile.PL
deleted file mode 100644
index 9a27c3592..000000000
--- a/perl-install/c/Makefile.PL
+++ /dev/null
@@ -1,23 +0,0 @@
-use ExtUtils::MakeMaker;
-use Config;
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-
-my $libs = '-lldetect -lext2fs';
-$libs .= ' -L/usr/X11R6/lib -lX11 -lgdk -lXxf86misc' if $ENV{C_DRAKX};
-$libs .= ' -lrpm -lrpmdb -lrpmio -lpopt -lz' if $ENV{C_RPM};
-
-my $pcmcia_dir = $ENV{C_DRAKX} && $Config{archname} =~ /i.86/ ? '../../mdk-stage1/pcmcia_' : '';
-
-symlink "$pcmcia_dir/probe.c", "probe.c" if $pcmcia_dir;
-
-WriteMakefile(
-    'NAME'	=> 'stuff',
-    'OPTIMIZE'  => '-Os',
-    'MAKEFILE'  => 'Makefile_c',
-    'OBJECT'    => "stuff.o smp.o sbus.o silo.o" . ($pcmcia_dir && " probe.o"),
-    'VERSION_FROM' => 'stuff.pm', # finds $VERSION
-    'LIBS'	=> [$libs],   # e.g., '-lm' 
-    'DEFINE'	=> '',     # e.g., '-DHAVE_SOMETHING' 
-    'INC'	=> "-I/usr/include/rpm `gtk-config --cflags` `glib-config --cflags`" . ($pcmcia_dir && " -I$pcmcia_dir -I$pcmcia_dir/.."), 
-);
diff --git a/perl-install/c/README b/perl-install/c/README
deleted file mode 100644
index b5ad1224f..000000000
--- a/perl-install/c/README
+++ /dev/null
@@ -1,3 +0,0 @@
-md5.c, md5_crypt.c and md5.h are taken from pam (dir modules/pam_pwdb)
-
-smp.c is taken from RedHat's install
diff --git a/perl-install/c/sbus.c b/perl-install/c/sbus.c
deleted file mode 100644
index 85d44fa79..000000000
--- a/perl-install/c/sbus.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* This file is inspired from source code of kudzu from Red Hat, Inc.
- * It has been modified to keep only "what is needed" in C, the prom_walk
- * has been rewritten in perl for convenience :-)
- *
- * Copyright notice from original version.
- * sbus.c: Probe for Sun SBUS and UPA framebuffers using OpenPROM,
- *         SBUS SCSI and Ethernet cards and SBUS or EBUS audio chips.
- *
- * Copyright (C) 1998, 1999 Jakub Jelinek (jj@ultra.linux.cz)
- *           (C) 1999 Red Hat, Inc.
- * 
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- */
-
-#ifdef __sparc__
-
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/ioctl.h>
-#include <asm/openpromio.h>
-
-static char *promdev = "/dev/openprom";
-static int promfd = -1;
-static int prom_current_node;
-#define MAX_PROP        128
-#define MAX_VAL         (4096-128-4)
-static char buf[4096];
-#define DECL_OP(size) struct openpromio *op = (struct openpromio *)buf; op->oprom_size = (size)
-
-int prom_open()
-{
-    int prom_root_node;
-
-    if (promfd == -1) {
-        promfd = open(promdev, O_RDONLY);
-	if (promfd == -1)
-	    return 0;
-    }
-    prom_root_node = prom_getsibling(0);
-    if (!prom_root_node) {
-        close(promfd);
-	promfd = -1;
-	return 0;
-    }
-    return prom_root_node;
-}
-
-void prom_close()
-{
-    if (promfd != -1) {
-        close(promfd);
-	promfd = -1;
-    }
-}
-
-int prom_getsibling(int node)
-{
-    DECL_OP(sizeof(int));
-        
-    if (node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMNEXT, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-int prom_getchild(int node)
-{
-    DECL_OP(sizeof(int));
-        
-    if (!node || node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMCHILD, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-char *prom_getopt(char *var, int *lenp)
-{
-    DECL_OP(MAX_VAL);
-        
-    strcpy (op->oprom_array, var);
-    if (ioctl (promfd, OPROMGETOPT, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-void prom_setopt(char *var, char *value) {
-    DECL_OP(MAX_VAL);
-
-    strcpy (op->oprom_array, var);
-    strcpy (op->oprom_array + strlen (var) + 1, value);
-    ioctl (promfd, OPROMSETOPT, op);
-}
-
-char *prom_getproperty(char *prop, int *lenp)
-{
-    DECL_OP(MAX_VAL);
-        
-    strcpy (op->oprom_array, prop);
-    if (ioctl (promfd, OPROMGETPROP, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-int prom_getbool(char *prop)
-{
-    DECL_OP(0);
-
-    *(int *)op->oprom_array = 0;
-    for (;;) {
-        op->oprom_size = MAX_PROP;
-	if (ioctl(promfd, OPROMNXTPROP, op) < 0)
-	    return 0;
-	if (!op->oprom_size)
-	    return 0;
-	if (!strcmp (op->oprom_array, prop))
-	    return 1;
-    }
-}
-
-int prom_pci2node(int bus, int devfn) {
-    DECL_OP(2*sizeof(int));
-    
-    ((int *)op->oprom_array)[0] = bus;
-    ((int *)op->oprom_array)[1] = devfn;
-    if (ioctl (promfd, OPROMPCI2NODE, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-#else
-int prom_open() { return 0; }
-void prom_close() {}
-int prom_getsibling(int node) { return 0; }
-int prom_getchild(int node) { return 0; }
-char *prom_getopt(char *var, int *lenp) { return 0; /* NULL */ }
-void prom_setopt(char *var, char *value) {}
-char *prom_getproperty(char *prop, int *lenp) { return 0; /* NULL */ }
-int prom_getbool(char *prop) { return 0; }
-int prom_pci2node(int bus, int devfn) { return 0; }
-#endif /* __sparc__ */
diff --git a/perl-install/c/silo.c b/perl-install/c/silo.c
deleted file mode 100644
index 2fd621f4e..000000000
--- a/perl-install/c/silo.c
+++ /dev/null
@@ -1,817 +0,0 @@
-/* silo.c: Conversions between SCSI and IDE disk names
- *	   and OpenPROM fully qualified paths.
- *
- * Modified for DrakX light integration.
- * Copyright (C) 1999, 2000 Jakub Jelinek <jakub@redhat.com>
- * 
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifdef __sparc__
-
-#define _GNU_SOURCE
-#include <fcntl.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/ioctl.h>
-#include <asm/openpromio.h>
-#include <ctype.h>
-#include <dirent.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-
-#ifndef OPROMSETCUR
-#define OPROMSETCUR	0x20004FF0
-#define OPROMPCI2NODE	0x20004FF1
-#define OPROMPATH2NODE	0x20004FF2
-#endif
-
-static int hasaliases;
-static char *promdev = "/dev/openprom";
-static int promfd;
-static char sd_targets[10] = "31204567";
-static int p1275 = 0;
-static int prom_root_node, prom_current_node;
-static int promvers;
-static void (*prom_walk_callback)(int node);
-static char prom_path[1024];
-#define MAX_PROP	128
-#define MAX_VAL		(4096-128-4)
-static char buf[4096];
-static char regstr[40];
-#define DECL_OP(size) struct openpromio *op = (struct openpromio *)buf; op->oprom_size = (size)
-
-static int
-prom_setcur(int node) {
-    DECL_OP(sizeof(int));
-    
-    if (node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMSETCUR, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static int
-prom_getsibling(int node) {
-    DECL_OP(sizeof(int));
-    
-    if (node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMNEXT, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static int
-prom_getchild(int node) {
-    DECL_OP(sizeof(int));
-    
-    if (!node || node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMCHILD, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static char *
-prom_getproperty(char *prop, int *lenp) {
-    DECL_OP(MAX_VAL);
-    
-    strcpy (op->oprom_array, prop);
-    if (ioctl (promfd, OPROMGETPROP, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-static char *
-prom_getopt(char *var, int *lenp) {
-    DECL_OP(MAX_VAL);
-
-    strcpy (op->oprom_array, var);
-    if (ioctl (promfd, OPROMGETOPT, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-static void
-prom_setopt(char *var, char *value) {
-    DECL_OP(MAX_VAL);
-
-    strcpy (op->oprom_array, var);
-    strcpy (op->oprom_array + strlen (var) + 1, value);
-    ioctl (promfd, OPROMSETOPT, op);
-}
-
-static int
-prom_getbool(char *prop) {
-    DECL_OP(0);
-
-    *(int *)op->oprom_array = 0;
-    for (;;) {
-        op->oprom_size = MAX_PROP;
-            if (ioctl(promfd, OPROMNXTPROP, op) < 0)
-                return 0;
-            if (!op->oprom_size)
-                return 0;
-            if (!strcmp (op->oprom_array, prop))
-                return 1;
-    }
-}
-
-static int
-prom_pci2node(int bus, int devfn) {
-    DECL_OP(2*sizeof(int));
-    
-    ((int *)op->oprom_array)[0] = bus;
-    ((int *)op->oprom_array)[1] = devfn;
-    if (ioctl (promfd, OPROMPCI2NODE, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static int
-prom_path2node(char *path) {
-    DECL_OP(MAX_VAL);
-    
-    strcpy (op->oprom_array, path);
-    if (ioctl (promfd, OPROMPATH2NODE, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-#define PW_TYPE_SBUS	1
-#define PW_TYPE_PCI	2
-#define PW_TYPE_EBUS	3
-
-static void
-prom_walk(char *path, int parent, int node, int type) {
-    int nextnode;
-    int len, ntype = type;
-    char *prop;
-    
-    prop = prom_getproperty("name", &len);
-    if (prop && len > 0) {
-        if ((!strcmp(prop, "sbus") || !strcmp(prop, "sbi")) && !type)
-            ntype = PW_TYPE_SBUS;
-        else if (!strcmp(prop, "ebus") && type == PW_TYPE_PCI)
-            ntype = PW_TYPE_EBUS;
-        else if (!strcmp(prop, "pci") && !type)
-            ntype = PW_TYPE_PCI;
-    }
-    *path = '/';
-    strcpy (path + 1, prop);
-    prop = prom_getproperty("reg", &len);
-    if (prop && len >= 4) {
-        unsigned int *reg = (unsigned int *)prop;
-        int cnt = 0;
-        if (!p1275 || (type == PW_TYPE_SBUS))
-	    sprintf (regstr, "@%x,%x", reg[0], reg[1]);
-        else if (type == PW_TYPE_PCI) {
-	    if ((reg[0] >> 8) & 7)
-		sprintf (regstr, "@%x,%x", (reg[0] >> 11) & 0x1f, (reg[0] >> 8) & 7);
-	    else
-		sprintf (regstr, "@%x", (reg[0] >> 11) & 0x1f);
-        } else if (len == 4)
-	    sprintf (regstr, "@%x", reg[0]);
-        else {
-	    unsigned int regs[2];
-
-	    /* Things get more complicated on UPA. If upa-portid exists,
-	       then address is @upa-portid,second-int-in-reg, otherwise
-	       it is @first-int-in-reg/16,second-int-in-reg (well, probably
-	       upa-portid always exists, but just to be safe). */
-	    memcpy (regs, reg, sizeof(regs));
-	    prop = prom_getproperty("upa-portid", &len);
-	    if (prop && len == 4) {
-		reg = (unsigned int *)prop;
-		sprintf (regstr, "@%x,%x", reg[0], regs[1]); 
-	    } else
-	        sprintf (regstr, "@%x,%x", regs[0] >> 4, regs[1]);
-	}
-        for (nextnode = prom_getchild(parent); nextnode; nextnode = prom_getsibling(nextnode)) {
-	    prop = prom_getproperty("name", &len);
-	    if (prop && len > 0 && !strcmp (path + 1, prop))
-		cnt++;
-	}
-        if (cnt > 1)
-	    strcat (path, regstr);
-    }
-
-    prom_walk_callback(node);
-
-    nextnode = prom_getchild(node);
-    if (nextnode)
-        prom_walk(strchr (path, 0), node, nextnode, ntype);
-    nextnode = prom_getsibling(node);
-    if (nextnode)
-        prom_walk(path, parent, nextnode, type);
-}
-
-static int
-prom_init(int mode) {    
-    struct utsname u;
-
-    promfd = open(promdev, mode);
-    if (promfd == -1)
-	return -1;
-    prom_root_node = prom_getsibling(0);
-    if (!prom_root_node)
-	return -1;
-
-    if (!uname (&u) && !strcmp (u.machine, "sparc64"))
-	p1275 = 1;
-    return 0;
-}
-
-#define SDSK_TYPE_IDE	1
-#define SDSK_TYPE_SD	2
-#define SDSK_TYPE_PLN	3
-#define SDSK_TYPE_FC	4
-
-static struct sdsk_disk {
-    unsigned int prom_node;
-    unsigned int type, host, hi, mid, lo;
-    unsigned char *prom_name;
-} *hd = NULL, *sd = NULL;
-static int hdlen, sdlen;
-
-static void
-scan_walk_callback(int node) {
-    int nextnode;
-    char *prop;
-    int len, disk;
-    static int v0ctrl = 0;
-
-    for (disk = 0; disk < hdlen + sdlen; disk++) {
-	if (hd[disk].prom_node == node) {
-	    switch (hd[disk].type) {
-	    case SDSK_TYPE_IDE:
-		for (nextnode = prom_getchild(node); nextnode; nextnode = prom_getsibling(nextnode)) {
-		    prop = prom_getproperty("name", &len);
-		    if (prop && len > 0 && (!strcmp (prop, "ata") || !strcmp (prop, "disk")))
-			break;
-		}
-		if (!nextnode)
-		    continue;
-		if (prop[0] == 'a')
-		    sprintf (prop, "/ata@%x,0/cmdk@%x,0", hd[disk].hi, hd[disk].lo);
-		else
-		    sprintf (prop, "/disk@%x,0", hd[disk].hi * 2 + hd[disk].lo);
-		break;
-	    case SDSK_TYPE_SD:
-		for (nextnode = prom_getchild(node); nextnode; nextnode = prom_getsibling(nextnode)) {
-		    prop = prom_getproperty("compatible", &len);
-		    if (prop && len > 0 && !strcmp (prop, "sd"))
-			break;
-		    prop = prom_getproperty("name", &len);
-		    if (prop && len > 0 && (!strcmp (prop, "sd") || !strcmp (prop, "disk")))
-			break;
-		}
-		if (!nextnode || hd[disk].hi)
-		    continue;
-		if (promvers) {
-		    char name[1024];
-		    prop = prom_getproperty("name", &len);
-		    if (prop && len > 0)
-			strcpy (name, prop);
-		    else
-			strcpy (name, "sd");
-		    if (!prop)
-			prop = ((struct openpromio *)buf)->oprom_array;
-		    sprintf (prop, "/%s@%x,%x", name, hd[disk].mid, hd[disk].lo);
-		} else {
-		    int i;
-		    for (i = 0; sd_targets[i]; i++)
-			if (sd_targets[i] == '0' + hd[disk].mid)
-			    break;
-		    if (!sd_targets[i])
-			i = hd[disk].mid;
-		    sprintf (prop, "sd(%d,%d,", v0ctrl, i);
-		}
-		break;
-	    case SDSK_TYPE_PLN:
-		prop = ((struct openpromio *)buf)->oprom_array;
-		sprintf (prop, "/SUNW,pln@%x,%x/SUNW,ssd@%x,%x",
-			 hd[disk].lo & 0xf0000000, hd[disk].lo & 0xffffff,
-			 hd[disk].hi, hd[disk].mid);
-		break;
-	    case SDSK_TYPE_FC:
-		prop = ((struct openpromio *)buf)->oprom_array;
-		sprintf (prop, "/sf@0,0/ssd@w%08x%08x,%x", hd[disk].hi, hd[disk].mid, hd[disk].lo);
-		break;
-	    default:
-		continue;
-	    }
-	    hd[disk].prom_name = malloc (strlen (prom_path) + strlen(prop) + 3);
-	    if (!hd[disk].prom_name)
-		continue;
-	    if (promvers)
-		strcpy (hd[disk].prom_name, prom_path);
-	    else
-		hd[disk].prom_name[0] = '\0';
-	    strcat (hd[disk].prom_name, prop);
-	}
-    }
-    v0ctrl++;
-}
-
-static int
-scan_ide(void) {
-    DIR * dir;
-    char path[80];
-    char buffer[512];
-    int fd, i, disk;
-    struct dirent * ent;
-    int pci_bus, pci_devfn;
-
-    if (access("/proc/ide", R_OK)) return 0;
-
-    if (!(dir = opendir("/proc/ide"))) {
-	return 1;
-    }
-
-    while ((ent = readdir(dir))) {
-	if (ent->d_name[0] == 'h' && ent->d_name[1] == 'd' &&
-	    ent->d_name[2] >= 'a' && ent->d_name[2] <= 'z' &&
-	    ent->d_name[3] == '\0') {
-	    disk = ent->d_name[2] - 'a';
-	    if (disk >= hdlen) {
-		hd = (struct sdsk_disk *)realloc(hd, ((disk&~3)+4)*sizeof(struct sdsk_disk));
-		memset (hd + hdlen, 0, ((disk&~3)+4-hdlen)*sizeof(struct sdsk_disk));
-		hdlen = (disk&~3)+4;
-	    }
-	    for (i = (disk & ~3); i <= (disk | 3); i++) {
-		if (hd[i].type)
-		    break;
-	    }
-	    if (i > (disk | 3)) {
-		sprintf(path, "/proc/ide/%s", ent->d_name);
-		if (readlink(path, buffer, 512) < 5)
-		    continue;
-		if (strncmp(buffer, "ide", 3) ||
-		    !isdigit(buffer[3]) ||
-		    buffer[4] != '/')
-		    continue;
-		buffer[4] = 0;
-		sprintf(path, "/proc/ide/%s/config", buffer);
-		if ((fd = open(path, O_RDONLY)) < 0)
-		    continue;
-		i = read(fd, buffer, 50);
-		close(fd);
-		if (i < 50) continue;
-		if (sscanf (buffer, "pci bus %x device %x ",
-			    &pci_bus, &pci_devfn) != 2)
-			continue;
-		hd[disk].prom_node = prom_pci2node (pci_bus, pci_devfn);
-	    } else
-	    	hd[disk].prom_node = hd[i].prom_node;
-	    hd[disk].type = SDSK_TYPE_IDE;
-	    hd[disk].hi = (disk & 2) >> 1;
-	    hd[disk].lo = (disk & 1);
-	}
-    }
-
-    closedir(dir);
-
-    return 0;
-}
-
-static int
-scan_scsi(void) {
-    FILE *f;
-    DIR * dir, *dirhba;
-    struct dirent * ent, *enthba;
-    struct stat st;
-    char * p, * q;
-    char buf[512];
-    char path[128];
-    int disk = 0;
-    int host, channel, id, lun;
-    int prom_node, pci_bus, pci_devfn;
-
-    if (access("/proc/scsi/scsi", R_OK)) {
-	return 0;
-    }
-
-    f = fopen("/proc/scsi/scsi", "r");
-    if (f == NULL) return 1;
-
-    if (fgets(buf, sizeof(buf), f) == NULL) {
-	fclose(f);
-	return 1;
-    }
-    if (!strcmp(buf, "Attached devices: none\n")) {
-	fclose(f);
-	return 0;
-    }
-
-    while (fgets(buf, sizeof(buf), f) != NULL) {
-	if (sscanf(buf, "Host: scsi%d Channel: %d Id: %d Lun: %d\n",
-		   &host, &channel, &id, &lun) != 4)
-	    break;
-	if (fgets(buf, sizeof(buf), f) == NULL)
-	    break;
-	if (strncmp(buf, "  Vendor:", 9))
-	    break;
-	if (fgets(buf, sizeof(buf), f) == NULL)
-	    break;
-	if (strncmp(buf, "  Type:   ", 10))
-	    break;
-	if (!strncmp(buf+10, "Direct-Access", 13)) {
-	    if (disk >= sdlen) {
-		hd = (struct sdsk_disk *)
-		     realloc(hd, (hdlen+(disk&~3)+4)*sizeof(struct sdsk_disk));
-		sd = hd + hdlen;
-		memset (sd + sdlen, 0,
-			((disk&~3)+4-sdlen)*sizeof(struct sdsk_disk));
-		sdlen = (disk&~3)+4;
-	    }
-	    sd[disk].type = SDSK_TYPE_SD;
-	    sd[disk].host = host;
-	    sd[disk].hi = channel;
-	    sd[disk].mid = id;
-	    sd[disk].lo = lun;
-	    disk++;
-	}
-    }
-    fclose (f);
-
-    if (!(dir = opendir("/proc/scsi"))) {
-	if (!hdlen && hd) {
-	    free(hd);
-	    hd = NULL;
-	}
-	sd = NULL;
-	sdlen = 0;
-	return 1;
-    }
-
-    while ((ent = readdir(dir))) {
-	if (!strcmp (ent->d_name, "scsi") || ent->d_name[0] == '.')
-	    continue;
-	sprintf (path, "/proc/scsi/%s", ent->d_name);
-	if (stat (path, &st) < 0 || !S_ISDIR (st.st_mode))
-	    continue;
-	if (!(dirhba = opendir(path)))
-	    continue;
-
-	while ((enthba = readdir(dirhba))) {
-	    if (enthba->d_name[0] == '.')
-		continue;
-	    host = atoi(enthba->d_name);
-	    sprintf (path, "/proc/scsi/%s/%s", ent->d_name, enthba->d_name);
-	    f = fopen (path, "r");
-	    if (f == NULL) continue;
-
-	    if (!strcmp (ent->d_name, "esp") ||
-		!strcmp (ent->d_name, "qlogicpti") ||
-		!strcmp (ent->d_name, "fcal"))
-		p = "PROM node";
-	    else if (!strcmp (ent->d_name, "pluto"))
-		p = "serial ";
-	    else
-		p = "PCI bus";
-	    while (fgets (buf, sizeof(buf), f) != NULL) {
-		q = strstr (buf, p);
-		if (q == NULL) continue;
-		prom_node = 0;
-		switch (p[1]) {
-		case 'R':
-		    if (sscanf (q, "PROM node %x", &prom_node) == 1)
-			q = NULL;
-		    break;
-		case 'e':
-		    if (sscanf (q, "serial 000000%x %*dx%*d on soc%*d port %x PROM node %x",
-				&id, &lun, &prom_node) == 3 &&
-			lun >= 10 && lun <= 11) {
-			q = NULL;
-		    }
-		    break;
-		case 'C':
-		    if (sscanf (q, "PCI bus %x device %x", &pci_bus, &pci_devfn) == 2) {
-			q = NULL;
-			prom_node = prom_pci2node (pci_bus, pci_devfn);
-		    }
-		    break;
-		}
-		if (q == NULL) {
-		    for (disk = 0; disk < sdlen; disk++)
-			if (sd[disk].host == host && sd[disk].type) {
-			    sd[disk].prom_node = prom_node;
-			    if (p[1] == 'e') {
-				sd[disk].type = SDSK_TYPE_PLN;
-				sd[disk].lo = (lun << 28) | id;
-			    } else if (!strcmp (ent->d_name, "fcal"))
-				sd[disk].type = SDSK_TYPE_FC;
-			}
-		}
-	    }
-	    if (!strcmp (ent->d_name, "fcal")) {
-		while (fgets (buf, sizeof(buf), f) != NULL) {
-		    unsigned long long ll;
-		    if (sscanf (buf, " [AL-PA: %*x, Id: %d, Port WWN: %Lx, Node WWN: ", &id, &ll) == 2) {
-			for (disk = 0; disk < sdlen; disk++)
-			if (sd[disk].host == host && sd[disk].mid == id) {
-			    sd[disk].hi = ll >> 32;
-			    sd[disk].mid = ll;
-			}
-		    }
-		}
-	    }
-	    fclose(f);
-	}
-	closedir(dirhba);
-    }
-    closedir(dir);
-    return 0;
-}
-
-static int get_prom_ver(void)
-{
-    FILE *f = fopen ("/proc/cpuinfo","r");
-    int ver = 0;
-    char buffer[1024];
-    char *p;
-                    
-    if (f) {
-	while (fgets (buffer, 1024, f)) {
-	    if (!strncmp (buffer, "promlib", 7)) {
-		p = strstr (buffer, "Version ");
-		if (p) {
-		    p += 8;
-		    if (*p == '0' || (*p >= '2' && *p <= '3')) {
-			ver = *p - '0';
-		    }
-		}
-		break;
-	    }
-	}
-	fclose(f);
-    }
-    if (!ver) {
-	int len;
-        p = prom_getopt("sd-targets", &len);
-        if (p && len > 0 && len <= 8)
-	    strcpy(sd_targets, p);
-    }
-    return ver;
-}
-
-static void check_aliases(void) {
-    int nextnode, len;
-    char *prop;
-    hasaliases = 0;
-    for (nextnode = prom_getchild(prom_root_node); nextnode; nextnode = prom_getsibling(nextnode)) {
-	prop = prom_getproperty("name", &len);
-	if (prop && len > 0 && !strcmp (prop, "aliases"))
-	    hasaliases = 1;
-    }
-}
-
-char *prom_root_name = NULL;
-
-static void get_root_name(void) {
-    int len;
-    char *prop;
-    
-    prom_getsibling(0);
-    prop = prom_getproperty("name", &len);
-    if (prop && len > 0)
-	prom_root_name = strdup(prop);
-}
-
-int init_sbusdisk(void) {
-    if (prom_init(O_RDONLY))
-	return -1;
-    promvers = get_prom_ver();
-    check_aliases();
-    get_root_name();
-    scan_ide();
-    scan_scsi();
-    prom_walk_callback = scan_walk_callback;
-    prom_walk(prom_path, prom_root_node, prom_getchild (prom_root_node), 0);
-    close(promfd);
-    return 0;
-}
-
-void set_prom_vars(char *linuxAlias, char *bootDevice) {
-    int len;
-    int aliasDone = 0;
-    if (prom_init(O_RDWR))
-	return;
-    if (linuxAlias && hasaliases) {
-	char *use_nvramrc;
-	char nvramrc[2048];
-	char *p, *q, *r, *s;
-	int enabled = -1;
-	int count;
-
-	use_nvramrc = prom_getopt ("use-nvramrc?", &len);
-	if (len > 0) {
-	    if (!strcasecmp (use_nvramrc, "false"))
-		enabled = 0;
-	    else if (!strcasecmp (use_nvramrc, "true"))
-		enabled = 1;
-	}
-	if (enabled != -1) {
-	    p = prom_getopt ("nvramrc", &len);
-	    if (p) {
-		memcpy (nvramrc, p, len);
-		nvramrc [len] = 0;
-		q = nvramrc;
-		for (;;) {
-		    /* If there is already `devalias linux /some/ugly/prom/path'
-		       make sure we fully understand that and remove it. */
-		    if (!strncmp (q, "devalias", 8) && (q[8] == ' ' || q[8] == '\t')) {
-			for (r = q + 9; *r == ' ' || *r == '\t'; r++);
-			if (!strncmp (r, "linux", 5)) {
-			    for (s = r + 5; *s && *s != ' ' && *s != '\t'; s++);
-			    if (!*s) break;
-			    if (s == r + 5 ||
-				(r[5] == '#' && r[6] >= '0' && r[6] <= '9' &&
-				 (s == r + 7 ||
-				  (r[7] >= '0' && r[7] <= '9' && s == r + 8)))) {
-				for (r = s + 1; *r == ' ' || *r == '\t'; r++);
-				for (; *r && *r != ' ' && *r != '\t' && *r != '\n'; r++);
-				for (; *r == ' ' || *r == '\t'; r++);
-				if (*r == '\n') {
-				    r++;
-				    memmove (q, r, strlen(r) + 1);
-				    continue;
-				}
-			    }
-			}
-		    }
-		    q = strchr (q, '\n');
-		    if (!q) break;
-		    q++;
-		}
-		len = strlen (nvramrc);
-		if (len && nvramrc [len-1] != '\n')
-		    nvramrc [len++] = '\n';
-		p = nvramrc + len;
-		p = stpcpy (p, "devalias linux ");
-		r = linuxAlias;
-		q = strchr (r, ';');
-		count = 1;
-		while (q) {
-		    memcpy (p, r, q - r);
-		    p += q - r;
-		    sprintf (p, "\ndevalias linux#%d ", count++);
-		    p = strchr (p, 0);
-		    r = q + 1;
-		    q = strchr (r, ';');
-		}
-		p = stpcpy (p, r);
-		*p++ = '\n';
-		*p = 0;
-		prom_setopt ("nvramrc", nvramrc);
-		if (!enabled)
-		    prom_setopt ("use-nvramrc?", "true");
-		aliasDone = 1;
-	    }
-	}
-    }
-    if (bootDevice) {
-	char *p;
-	if (aliasDone)
-	    bootDevice = "linux";
-	p = prom_getopt ("boot-device", &len);
-	if (p) {
-	    prom_setopt ("boot-device", bootDevice);
-	    prom_setopt ("boot-file", "");
-	} else {
-	    p = prom_getopt ("boot-from", &len);
-	    if (p)
-		prom_setopt ("boot-from", bootDevice);
-	}
-    }
-    close(promfd);
-}
-
-#ifdef STANDALONE_SILO
-
-int main(void) {
-    int i;
-
-    init_sbusdisk();
-    set_prom_vars ("/sbus@1f,0/espdma/esp/sd@1,0:c;/sbus@1f,0/espdma/esp/sd@1,0:g;/sbus@1f,0/espdma/esp/sd@1,0:h", "linux");
-    printf ("prom root name `%s'\n", prom_root_name);
-    for (i = 0; i < hdlen; i++) {
-	if (hd[i].type)
-		printf ("hd%c %x %d %d %d\n", i + 'a', hd[i].prom_node,
-						    hd[i].hi, hd[i].mid, hd[i].lo);
-	if (hd[i].prom_name) printf ("%s\n", hd[i].prom_name);
-    }
-    for (i = 0; i < sdlen; i++) {
-	if (sd[i].type) {
-	    if (i < 26)
-		printf ("sd%c %x %d %d %d\n", i + 'a', sd[i].prom_node,
-						    sd[i].hi, sd[i].mid, sd[i].lo);
-	    else
-		printf ("sd%c%c %x %d %d %d\n", (i / 26) + 'a' - 1, (i % 26) + 'a', sd[i].prom_node,
-						    sd[i].hi, sd[i].mid, sd[i].lo);
-	}
-	if (sd[i].prom_name) printf ("%s\n", sd[i].prom_name);
-    }
-    exit(0);
-}
-
-#else
-
-void
-initSilo ()
-{
-    return init_sbusdisk();
-}
-
-char *
-disk2PromPath (unsigned char *disk)
-{
-    static unsigned char prompath[1024];
-    int diskno = -1, part;
-
-    if (disk[0] == 'h' && disk[1] == 'd' && disk[2] >= 'a' && disk[2] <= 'z') {
-	diskno = disk[2] - 'a';
-	disk += 3;
-    } else if (disk[0] == 's' && disk[1] == 'd' && disk[2] >= 'a' && disk[2] <= 'z') {
-	if (disk[3] >= 'a' && disk[3] <= 'z') {
-	    diskno = (disk[2] - 'a' + 1) * 26 + (disk[3] - 'a');
-	    disk += 4;
-	} else {
-	    diskno = disk[2] - 'a';
-	    disk += 3;
-	}
-	if (diskno >= 128)
-	    diskno = -1;
-	else
-	    diskno += hdlen;
-    }
-    if (diskno == -1)
-	part = -1;
-    else if (!disk[0])
-	part = 3;
-    else {
-	part = atoi (disk);
-	if (part <= 0 || part > 8) part = -1;
-    }
-    if (diskno < 0 || part == -1 ||
-	diskno >= hdlen + sdlen || !hd[diskno].prom_name) {
-	return NULL;
-    }
-    if (!promvers)
-	sprintf (prompath, "%s%d)", hd[diskno].prom_name, part ? part - 1 : 2);
-    else {
-	if (part)
-	    sprintf (prompath, "%s:%c", hd[diskno].prom_name, part + 'a' - 1);
-	else
-	    strcpy (prompath, hd[diskno].prom_name);
-    }
-    return prompath;
-}
-
-int
-hasAliases (void)
-{
-    return hasaliases;
-}
-
-char *
-promRootName (void)
-{
-    return prom_root_name ? prom_root_name : "";
-}
-
-void
-setPromVars (char *linuxAlias, char *bootDevice)
-{
-    if (linuxAlias && !*linuxAlias) linuxAlias = NULL;
-    if (bootDevice && !*bootDevice) bootDevice = NULL;
-    set_prom_vars (linuxAlias, bootDevice);
-}
-
-#endif
-
-#else
-void initSilo() {}
-char *disk2PromPath(unsigned char *disk) { return 0; /* NULL */ }
-int hasAliases(void) { return 0; }
-char *promRootName(void) { return 0; /* NULL */ }
-void setPromVars(char *linuxAlias, char *bootDevice) {}
-#endif /* __sparc__ */
diff --git a/perl-install/c/smp-test.c b/perl-install/c/smp-test.c
deleted file mode 100644
index f644449b8..000000000
--- a/perl-install/c/smp-test.c
+++ /dev/null
@@ -1,6 +0,0 @@
-main() {
-  if (detectSMP())
-    printf("has smp\n");
-  else
-    printf("no smp\n");
-}
diff --git a/perl-install/c/smp.c b/perl-install/c/smp.c
deleted file mode 100644
index baf786cc6..000000000
--- a/perl-install/c/smp.c
+++ /dev/null
@@ -1,509 +0,0 @@
-/*
-[_Anarchy_(alan@lightning.swansea.uk.linux.org)] you should do one check
-   though - if the board seems to be SMP and the CPU in /proc/cpuinfo is non
-   intel dont install an SMP kernel - thats a dual pentium board with a cyrix
-   or similar single cpu in it
-*/
-
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/mman.h>
-#include <string.h>
-#include <errno.h>
-
-#ifdef __alpha__
-int alphaDetectSMP(void)
-{
-    int issmp = 0;
-    FILE *f;
-    
-    f = fopen("/proc/cpuinfo", "r");
-    if (f) {     
-	char buff[1024];
-	
-	while (fgets (buff, 1024, f) != NULL) {
-	    if (!strncmp (buff, "cpus detected\t\t: ", 17)) {
-		if (strtoul (buff + 17, NULL, 0) > 1)
-		    issmp = 1;
-		break;
-	    }
-	}
-	fclose(f);
-    } else
-	return -1;
-    
-    return issmp;
-}
-#endif /* __alpha__ */
-
-#ifdef __sparc__
-int sparcDetectSMP(void)
-{
-    int issmp = 0;
-    FILE *f;
-    
-    f = fopen("/proc/cpuinfo", "r");
-    if (f) {     
-	char buff[1024];
-	
-	while (fgets (buff, 1024, f) != NULL) {
-	    if (!strncmp (buff, "ncpus probed\t: ", 15)) {
-		if (strtoul (buff + 15, NULL, 0) > 1)
-		    issmp = 1;
-		break;
-	    }
-	}
-	fclose(f);
-    } else
-	return -1;
-    
-    return issmp;
-}
-#endif /* __sparc__ */
-
-/* just a placeholder for now - don't have an SMP machine
-   need something in place to build - s.benedict */
-
-#ifdef __powerpc__
-int ppcDetectSMP(void)
-{
-    int issmp = 0;
-    FILE *f;
-    
-    f = fopen("/proc/cpuinfo", "r");
-    if (f) {     
-        char buff[1024];
-        
-        while (fgets (buff, 1024, f) != NULL) {
-            if (!strncmp (buff, "ncpus active\t: ", 15)) {
-                if (strtoul (buff + 15, NULL, 0) > 1)
-                    issmp = 1;
-                break;
-            }
-        }
-        fclose(f);
-    } else
-        return -1;
-    
-    return issmp;
-}
-#endif /* __powerpc__ */
-
-#ifdef __i386__
-/*
- * Copyright (c) 1996, by Steve Passe
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. The name of the developer may NOT be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *      $Id$
- */
-
-/*
- * mptable.c
- */
-
-#define VMAJOR                  2
-#define VMINOR                  0
-#define VDELTA                  12
-
-/*
- * this will cause the raw mp table to be dumped to /tmp/mpdump
- *
-#define RAW_DUMP
- */
-
-#define MP_SIG                  0x5f504d5f      /* _MP_ */
-#define EXTENDED_PROCESSING_READY
-#define OEM_PROCESSING_READY_NOT
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/types.h>
-
-#define LINUX 1
-#if LINUX
-typedef unsigned int vm_offset_t;
-#else
-#include <machine/types.h>
-#endif
-
-/* EBDA is @ 40:0e in real-mode terms */
-#define EBDA_POINTER            0x040e          /* location of EBDA pointer */
-
-/* CMOS 'top of mem' is @ 40:13 in real-mode terms */
-#define TOPOFMEM_POINTER        0x0413          /* BIOS: base memory size */
-
-#define DEFAULT_TOPOFMEM        0xa0000
-
-#define BIOS_BASE               0xf0000
-#define BIOS_BASE2              0xe0000
-#define BIOS_SIZE               0x10000
-#define ONE_KBYTE               1024
-
-#define GROPE_AREA1             0x80000
-#define GROPE_AREA2             0x90000
-#define GROPE_SIZE              0x10000
-
-/* MP Floating Pointer Structure */
-typedef struct MPFPS {
-    char        signature[ 4 ];
-    void*       pap;
-    u_char      length;
-    u_char      spec_rev;
-    u_char      checksum;
-    u_char      mpfb1;
-    u_char      mpfb2;
-    u_char      mpfb3;
-    u_char      mpfb4;
-    u_char      mpfb5;
-} mpfps_t;
-
-/* MP Configuration Table Header */
-typedef struct MPCTH {
-    char        signature[ 4 ];
-    u_short     base_table_length;
-    u_char      spec_rev;
-    u_char      checksum;
-    u_char      oem_id[ 8 ];
-    u_char      product_id[ 12 ];
-    void*       oem_table_pointer;
-    u_short     oem_table_size;
-    u_short     entry_count;
-    void*       apic_address;
-    u_short     extended_table_length;
-    u_char      extended_table_checksum;
-    u_char      reserved;
-} mpcth_t;
-
-typedef struct PROCENTRY {
-    u_char      type;
-    u_char      apicID;
-    u_char      apicVersion;
-    u_char      cpuFlags;
-    u_long      cpuSignature;
-    u_long      featureFlags;
-    u_long      reserved1;
-    u_long      reserved2;
-} ProcEntry;
-
-#define PROCENTRY_FLAG_EN       0x01
-
-static void seekEntry( vm_offset_t addr );
-static void apic_probe( vm_offset_t* paddr, int* where );
-static void readEntry( void* entry, int size );
-
-/* global data */
-static int     pfd;            /* physical /dev/mem fd */
-static int     verbose = 0;
-static int     grope = 0;
-
-static int
-readType()
-{
-    u_char      type;
-
-    if ( read( pfd, &type, sizeof( u_char ) ) != sizeof( u_char ) ) {
-        perror( "type read" );
-        fprintf( stderr, "\npfd: %d", pfd );
-        fflush( stderr );
-        exit( 1 );
-    }
-
-    if ( lseek( pfd, -1, SEEK_CUR ) < 0 ) {
-        perror( "type seek" );
-        exit( 1 );
-    }
-
-    return (int)type;
-}
-
-static int intelDetectSMP(void)
-{
-    vm_offset_t paddr;
-    int         where;
-    mpfps_t     mpfps;
-    int		rc = 0;
-    int		ncpus = 0;
-    
-    /* open physical memory for access to MP structures */
-    if ( (pfd = open( "/dev/mem", O_RDONLY )) < 0 ) {
-	return 0;
-    }
-
-    /* probe for MP structures */
-    apic_probe( &paddr, &where );
-    if ( where <= 0 )
-	return 0;
-
-    seekEntry( paddr );
-    readEntry( &mpfps, sizeof( mpfps_t ) );
-
-    if (mpfps.mpfb1)
-	/* old style */
-	rc = 1;
-    else {
-	/* go to the config table */
-	mpcth_t     cth;
-	int count, i;
-	    
-	paddr = (vm_offset_t) mpfps.pap;
-	seekEntry( paddr );
-	readEntry( &cth, sizeof( cth ) );
-	/* if we don't have any entries, the kernel sure
-	   won't be able to set up mp.  Needs at least one entry
-	   for smp kernel */
-	if (cth.entry_count <= 1) {
-	    close (pfd);
-	    return 0;
-	}
-	count = cth.entry_count;
-	for (i = 0; i < count; i++) {
-	    if ( readType() == 0 ) {
-		ProcEntry   entry;
-		readEntry( &entry, sizeof( entry ) );
-		if (entry.cpuFlags & PROCENTRY_FLAG_EN)
-		    ncpus++;
-	    }
-	}
-	if (ncpus > 1)
-	    rc = 1;
-    }
-
-    close (pfd);
-    return rc;
-}
-
-/*
- * set PHYSICAL address of MP floating pointer structure
- */
-#define NEXT(X)         ((X) += 4)
-static void
-apic_probe( vm_offset_t* paddr, int* where )
-{
-    /*
-     * c rewrite of apic_probe() by Jack F. Vogel
-     */
-
-    int         x;
-    u_short     segment;
-    vm_offset_t target;
-    u_int       buffer[ BIOS_SIZE / sizeof( int ) ];
-
-    if ( verbose )
-        printf( "\n" );
-
-    /* search Extended Bios Data Area, if present */
-    if ( verbose )
-        printf( " looking for EBDA pointer @ 0x%04x, ", EBDA_POINTER );
-    seekEntry( (vm_offset_t)EBDA_POINTER );
-    readEntry( &segment, 2 );
-    if ( segment ) {                /* search EBDA */
-        target = (vm_offset_t)segment << 4;
-        if ( verbose )
-            printf( "found, searching EBDA @ 0x%08x\n", target );
-        seekEntry( target );
-        readEntry( buffer, ONE_KBYTE );
-
-        for ( x = 0; x < ONE_KBYTE / sizeof ( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 1;
-                *paddr = (x * sizeof( unsigned int )) + target;
-                return;
-            }
-        }
-    }
-    else {
-        if ( verbose )
-            printf( "NOT found\n" );
-    }
-
-    /* read CMOS for real top of mem */
-    seekEntry( (vm_offset_t)TOPOFMEM_POINTER );
-    readEntry( &segment, 2 );
-    --segment;                                          /* less ONE_KBYTE */
-    target = segment * 1024;
-    if ( verbose )
-        printf( " searching CMOS 'top of mem' @ 0x%08x (%dK)\n",
-                target, segment );
-    seekEntry( target );
-    readEntry( buffer, ONE_KBYTE );
-
-    for ( x = 0; x < ONE_KBYTE / sizeof ( unsigned int ); NEXT(x) ) {
-        if ( buffer[ x ] == MP_SIG ) {
-            *where = 2;
-            *paddr = (x * sizeof( unsigned int )) + target;
-            return;
-        }
-    }
-
-    /* we don't necessarily believe CMOS, check base of the last 1K of 640K */
-    if ( target != (DEFAULT_TOPOFMEM - 1024)) {
-        target = (DEFAULT_TOPOFMEM - 1024);
-        if ( verbose )
-            printf( " searching default 'top of mem' @ 0x%08x (%dK)\n",
-                    target, (target / 1024) );
-        seekEntry( target );
-        readEntry( buffer, ONE_KBYTE );
-
-        for ( x = 0; x < ONE_KBYTE / sizeof ( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 3;
-                *paddr = (x * sizeof( unsigned int )) + target;
-                return;
-            }
-        }
-    }
-
-    /* search the BIOS */
-    if ( verbose )
-        printf( " searching BIOS @ 0x%08x\n", BIOS_BASE );
-    seekEntry( BIOS_BASE );
-    readEntry( buffer, BIOS_SIZE );
-
-    for ( x = 0; x < BIOS_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-        if ( buffer[ x ] == MP_SIG ) {
-            *where = 4;
-            *paddr = (x * sizeof( unsigned int )) + BIOS_BASE;
-            return;
-        }
-    }
-
-    /* search the extended BIOS */
-    if ( verbose )
-        printf( " searching extended BIOS @ 0x%08x\n", BIOS_BASE2 );
-    seekEntry( BIOS_BASE2 );
-    readEntry( buffer, BIOS_SIZE );
-
-    for ( x = 0; x < BIOS_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-        if ( buffer[ x ] == MP_SIG ) {
-            *where = 5;
-            *paddr = (x * sizeof( unsigned int )) + BIOS_BASE2;
-            return;
-        }
-    }
-
-    if ( grope ) {
-        /* search additional memory */
-        target = GROPE_AREA1;
-        if ( verbose )
-            printf( " groping memory @ 0x%08x\n", target );
-        seekEntry( target );
-        readEntry( buffer, GROPE_SIZE );
-
-        for ( x = 0; x < GROPE_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 6;
-                *paddr = (x * sizeof( unsigned int )) + GROPE_AREA1;
-                return;
-            }
-        }
-
-        target = GROPE_AREA2;
-        if ( verbose )
-            printf( " groping memory @ 0x%08x\n", target );
-        seekEntry( target );
-        readEntry( buffer, GROPE_SIZE );
-
-        for ( x = 0; x < GROPE_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 7;
-                *paddr = (x * sizeof( unsigned int )) + GROPE_AREA2;
-                return;
-            }
-        }
-    }
-
-    *where = 0;
-    *paddr = (vm_offset_t)0;
-}
-
-
-/*
- *
- */
-static void
-seekEntry( vm_offset_t addr )
-{
-    if ( lseek( pfd, (off_t)addr, SEEK_SET ) < 0 ) {
-        return;
-        perror( "/dev/mem seek" );
-        exit( 1 );
-    }
-}
-
-
-/*
- *
- */
-static void
-readEntry( void* entry, int size )
-{
-    if ( read( pfd, entry, size ) != size ) {
-        return;
-        perror( "readEntry" );
-        exit( 1 );
-    }
-}
-
-
-#endif /* __i386__ */
-
-int detectSMP(void)
-{
-    static int isSMP = -1;
-
-    if (isSMP != -1)
-	return isSMP;
-
-#ifdef __i386__
-    return isSMP = intelDetectSMP();
-#elif __sparc__
-    return isSMP = sparcDetectSMP();
-#elif __alpha__
-    return isSMP = alphaDetectSMP();
-#elif __powerpc__
-    return isSMP = ppcDetectSMP();
-#elif __ia64__
-	/* TODO: Update to check against /proc/pal/cpuX */
-    return isSMP = 1;
-#elif __x86_64__
-	/* TODO: Update when SMP machines are there */
-	return isSMP = 0;
-#else
-    #error unknown architecture
-#endif
-}
-
-#if TEST
-int main() {
-  if (detectSMP())
-    printf("has smp\n");
-  else
-    printf("no smp\n");
-}
-#endif
diff --git a/perl-install/c/smp.h b/perl-install/c/smp.h
deleted file mode 100644
index 3255cc489..000000000
--- a/perl-install/c/smp.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef SMP_H
-#define SMP_H
-
-int detectSMP(void);
-
-#endif /* SMP_H */
diff --git a/perl-install/c/stuff.pm b/perl-install/c/stuff.pm
deleted file mode 100644
index 918abee6c..000000000
--- a/perl-install/c/stuff.pm
+++ /dev/null
@@ -1,34 +0,0 @@
-package c::stuff; # $Id$
-
-use strict;
-use vars qw($VERSION @ISA);
-
-require DynaLoader;
-
-@ISA = qw(DynaLoader);
-$VERSION = '0.01';
-
-bootstrap c::stuff $VERSION;
-
-sub from_utf8 { iconv($_[0], "utf-8", standard_charset()) }
-sub to_utf8 { iconv($_[0], standard_charset(), "utf-8") }
-
-sub headerGetEntry {
-    my ($h, $q) = @_;
-    $h or log::l("empty header in headerGetEntry"), return;
-    $q eq 'name' and return headerGetEntry_string($h, RPMTAG_NAME());
-    $q eq 'group' and return from_utf8(headerGetEntry_string($h, RPMTAG_GROUP()));
-    $q eq 'version' and return headerGetEntry_string($h, RPMTAG_VERSION());
-    $q eq 'release' and return headerGetEntry_string($h, RPMTAG_RELEASE());
-    $q eq 'epoch' and return headerGetEntry_int($h, RPMTAG_EPOCH());
-    $q eq 'summary' and return from_utf8(headerGetEntry_string($h, RPMTAG_SUMMARY()));
-    $q eq 'description' and return from_utf8(headerGetEntry_string($h, RPMTAG_DESCRIPTION()));
-    $q eq 'arch' and return headerGetEntry_string($h, RPMTAG_ARCH());
-    $q eq 'size' and return headerGetEntry_int($h, RPMTAG_SIZE());
-    $q eq 'obsoletes' and return headerGetEntry_string_list($h, RPMTAG_OBSOLETES());
-    $q eq 'requires' and return headerGetEntry_string_list($h, RPMTAG_REQUIRENAME());
-    $q eq 'fileflags' and return headerGetEntry_int_list($h, RPMTAG_FILEFLAGS());
-    $q eq 'filenames' and return headerGetEntry_filenames($h);
-}
-
-1;
diff --git a/perl-install/class_discard.pm b/perl-install/class_discard.pm
deleted file mode 100644
index 7ecd1375b..000000000
--- a/perl-install/class_discard.pm
+++ /dev/null
@@ -1,11 +0,0 @@
-package class_discard; # $Id$
-
-use log;
-
-sub new { bless {}, "class_discard" }
-
-sub AUTOLOAD {
-    log::l("class_discard: $AUTOLOAD called at ", caller);
-}
-
-1;
diff --git a/perl-install/commands b/perl-install/commands
deleted file mode 100755
index baa02f232..000000000
--- a/perl-install/commands
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/usr/bin/perl
-
-use diagnostics;
-use strict;
-
-use lib qw(/usr/bin/perl-install .);
-use common;
-use commands;
-
-my $progname = basename($0);
-
-# hack as some functions are defined by perl... so chmod -> chmod_
-&{$commands::{$progname} || $commands::{$progname . "_"} || \&err}(@ARGV), exit 0;
-
-sub err { die "$0: unknown program (unimplemented)\n"; }
diff --git a/perl-install/commands.pm b/perl-install/commands.pm
deleted file mode 100644
index 36b0297e5..000000000
--- a/perl-install/commands.pm
+++ /dev/null
@@ -1,587 +0,0 @@
-#-########################################################################
-#- This file implement many common shell commands:
-#- true, false, cat, which, dirname, basename, rmdir, lsmod, grep, tr,
-#- mount, umount, mkdir, mknod, ln, rm, chmod, chown, mkswap, swapon,
-#- swapoff, ls, cp, ps, dd, head, tail, strings, hexdump, more, insmod,
-#- modprobe, route, df, kill, lspci, lssbus, dmesg, sort, du, 
-#-########################################################################
-package commands; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($printable_chars);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::System;
-use common;
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-my $BUFFER_SIZE = 1024;
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub getopts {
-    my $o = shift;
-    my @r = map { '' } (@_ = split //, $_[0]);
-    while (1) {
-	local $_ = $o->[0];
-	$_ && /^-/ or return @r;
-	for (my $i = 0; $i < @_; $i++) { /$_[$i]/ and $r[$i] = $_[$i]; }
-	shift @$o;
-    }
-    @r;
-}
-
-sub true { exit 0 }
-sub false { exit 1 }
-sub cat { @ARGV = @_; print while <> }
-sub which { ARG: foreach (@_) { foreach my $c (split /:/, $ENV{PATH}) { -x "$c/$_" and print("$c/$_\n"), next ARG; }}}
-sub dirname_ { print dirname(@_), "\n" }
-sub basename_ { print basename(@_), "\n" }
-sub rmdir_ { foreach (@_) { rmdir $_ or die "rmdir: can't remove $_\n" } }
-sub lsmod { print "Module                  Size  Used by\n"; cat("/proc/modules"); }
-
-sub grep_ {
-    my ($h, $v, $i) = getopts(\@_, qw(hvi));
-    @_ == 0 || $h and die "usage: grep <regexp> [files...]\n";
-    my $r = shift;
-    $r = qr/$r/i if $i;
-    @ARGV = @_; (/$r/ ? $v || print : $v && print) while <>;
-}
-
-sub tr_ {
-    my ($s, $c, $d) = getopts(\@_, qw(s c d));
-    @_ >= 1 + (!$d || $s) or die "usage: tr [-c] [-s [-d]] <set1> <set2> [files...]\n    or tr [-c] -d <set1> [files...]\n";
-    my $set1 = shift;
-    my $set2; !$d || $s and $set2 = shift;
-    @ARGV = @_;
-    eval "(tr/$set1/$set2/$s$d$c, print) while <>";
-}
-
-sub mount {
-    @_ or return cat("/proc/mounts");
-    my ($t, $r) = getopts(\@_, qw(tr));
-    my $fs = $t && shift;
-
-    @_ == 2 or die "usage: mount [-r] [-t <fs>] <device> <dir>\n",
-    "       (use -r for readonly)\n",
-    "       (if /dev/ is left off the device name, a temporary node will be created)\n";
-
-    my ($dev, $where) = @_;
-    $fs ||= $where =~ /:/ ? "nfs" :
-            $dev =~ /fd/ ? "vfat" : "ext2";
-
-    require fs;
-    require modules;
-    modules::load_dependencies("/modules/modules.dep");
-    fs::mount($dev, $where, $fs, $r);
-}
-
-sub umount {
-    @_ == 1 or die "umount expects a single argument\n";
-
-    require fs;
-    fs::umount($_[0]);
-}
-
-sub mkdir_ {
-    my ($rec) = getopts(\@_, qw(p));
-    mkdir_p($_) foreach @_;
-}
-
-
-sub mknod {
-    if (@_ == 1) {
-	require devices;
-	eval { devices::make($_[0]) }; $@ and die "mknod: failed to create $_[0]\n";
-    } elsif (@_ == 4) {
-	require c;
-	my $mode = $ {{"b" => c::S_IFBLK(), "c" => c::S_IFCHR()}}{$_[1]} or die "unknown node type $_[1]\n";
-	syscall_('mknod', my $a = $_[0], $mode | 0600, makedev($_[2], $_[3])) or die "mknod failed: $!\n";
-    } else { die "usage: mknod <path> [b|c] <major> <minor> or mknod <path>\n"; }
-}
-
-sub ln {
-    my ($force, $soft) = getopts(\@_, qw(fs));
-    @_ >= 1 or die "usage: ln [-s] [-f] <source> [<dest>]\n";
-
-    my ($source, $dest) = @_;
-    $dest ||= basename($source);
-
-    $force and unlink $dest;
-
-    ($soft ? symlink($source, $dest) : link($source, $dest)) or die "ln failed: $!\n";
-}
-
-sub rm {
-    my ($rec, undef) = getopts(\@_, qw(rf));
-
-    my $rm; $rm = sub {
-	foreach (@_) {
-	    if (!-l $_ && -d $_) {
-		$rec or die "$_ is a directory\n";
-		&$rm(glob_($_));
-		rmdir $_ or die "can't remove directory $_: $!\n";
-	    } else { unlink $_ or die "rm of $_ failed: $!\n" }
-	}
-    };
-    &$rm(@_);
-}
-
-sub chmod_ {
-    @_ >= 2 or die "usage: chmod <mode> <files>\n";
-
-    my $mode = shift;
-    $mode =~ /^[0-7]+$/ or die "illegal mode $mode\n";
-
-    foreach (@_) { chmod oct($mode), $_ or die "chmod failed $_: $!\n" }
-}
-
-sub chown_ {
-    my ($rec, undef) = getopts(\@_, qw(r));
-    local $_ = shift or die "usage: chown [-r] name[.group] <files>\n";
-
-    my ($name, $group) = (split('\.'), $_);
-
-    my ($uid, $gid) = (getpwnam($name) || $name, getgrnam($group) || $group);
-
-    my $chown; $chown = sub {
-	foreach (@_) {
-	    chown $uid, $gid, $_ or die "chown of file $_ failed: $!\n";
-	    -d $_ && $rec and &$chown(glob_($_));
-	}
-    };
-    &$chown(@_);
-}
-
-sub mkswap {
-    @_ == 1 or die "mkswap <device>\n";
-    require swap;
-    swap::enable($_[0], 0);
-}
-
-sub swapon {
-    @_ == 1 or die "swapon <file>\n";
-    require swap;
-    swap::swapon($_[0]);
-}
-sub swapoff {
-    @_ == 1 or die "swapoff <file>\n";
-    require swap;
-    swap::swapoff($_[0]);
-}
-
-sub uncpio {
-    @_ and die "uncpio reads from stdin\n";
-
-#    cpioInstallArchive(gzdopen(0, "r"), NULL, 0, NULL, NULL, &fail);
-}
-
-
-sub rights {
-    my $r = '-' x 9;
-    my @rights = (qw(x w r x w r x w r), ['t', 0], ['s', 3], ['s', 6]);
-    for (my $i = 0; $i < @rights; $i++) {
-	if (vec(pack("S", $_[0]), $i, 1)) {
-	    my ($val, $place) = $i >= 9 ? @{$rights[$i]} : ($rights[$i], $i);
-	    my $old = \substr($r, 8 - $place, 1);
-	    $$old = ($$old eq '-' && $i >= 9) ? uc $val : $val;
-	}
-    }
-    my @types = split //, "_pc_d_b_-_l_s";
-    $types[$_[0] >> 12 & 0xf] . $r;
-}
-
-sub displaySize {
-    my $m = $_[0] >> 12;
-    $m == 4 || $m == 8 || $m == 10;
-}
-
-sub ls {
-    my ($l , $h) = getopts(\@_, qw(lh));
-    $h and die "usage: ls [-l] <files...>\n";
-
-    @_ or @_ = '.';
-    @_ == 1 && -d $_[0] and @_ = glob_($_[0]);
-    foreach (sort @_) {
-	if ($l) {
-	    my @s = lstat or warn("can't stat file $_\n"), next;
-	    formline(
-"@<<<<<<<<< @<<<<<<< @<<<<<<< @>>>>>>>> @>>>>>>>>>>>>>>> @*\n",
-		     rights($s[2]), getpwuid $s[4] || $s[4], getgrgid $s[5] || $s[5],
-		     displaySize($s[2]) ? $s[7] : join(", ", unmakedev($s[6])),
-		     scalar localtime $s[9], -l $_ ? "$_ -> " . readlink $_ : $_);
-	    print $^A; $^A = '';
-	} else { print "$_\n"; }
-    }
-}
-sub cp {
-    my ($force) = getopts(\@_, qw(f));
-    @_ >= 2 or die "usage: cp [-f] <sources> <dest>\n(this cp does -Rl by default)\n";
-
-    my $cp; $cp = sub {
-	my $dest = pop @_;
-
-	@_ or return;
-	@_ == 1 || -d $dest or die "cp: copying multiple files, but last argument ($dest) is not a directory\n";
-
-	foreach my $src (@_) {
-	    my $dest = $dest;
-	    -d $dest and $dest .= "/" . basename($src);
-
-	    if (-e $dest) {
-		$force ? unlink $dest : die "file $dest already exist\n";
-	    }
-
-	    if (-d $src) {
-		-d $dest or mkdir $dest, (stat($src))[2] or die "mkdir: can't create directory $dest: $!\n";
-		&$cp(glob_($src), $dest);
-	    } elsif (-l $src) {
-		unless (symlink((readlink($src) || die "readlink failed: $!"), $dest)) {
-		    my $msg = "symlink: can't create symlink $dest: $!\n";
-		    $force ? warn $msg : die $msg;		    
-		}
-	    } else {
-		local (*F, *G);
-		open F, $src or die "can't open $src for reading: $!\n";
-		open G, "> $dest" or $force or die "can't create $dest : $!\n";
-		local $_;
-		while (<F>) { print G $_ }
-		chmod((stat($src))[2], $dest);
-	    }
-	}
-    };
-    &$cp(@_);
-}
-
-sub ps {
-    @_ and die "usage: ps\n";
-    my ($pid, $rss, $cpu, $cmd);
-    my ($uptime) = split ' ', first(cat_("/proc/uptime"));
-    my $hertz = 100;
-
-    require c;
-    my $page = c::getpagesize() / 1024;
-
-    open PS, ">&STDOUT";
-    format PS_TOP =
-  PID   RSS %CPU CMD
-.
-    format PS =
-@>>>> @>>>> @>>> @<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
-$pid, $rss, $cpu, $cmd
-.
-    foreach $pid (sort {$a <=> $b} grep { /\d+/ } all('/proc')) {
-	 my @l = split(' ', cat_("/proc/$pid/stat"));
-	 $cpu = sprintf "%2.1f", max(0, min(99, ($l[13] + $l[14]) * 100 / $hertz / ($uptime - $l[21] / $hertz)));
-	 $rss = (split ' ', cat_("/proc/$pid/stat"))[23] * $page;
-	 (($cmd) = cat_("/proc/$pid/cmdline")) =~ s/\0/ /g;
-	 $cmd ||= (split ' ', (cat_("/proc/$pid/stat"))[0])[1];
-	 write PS;
-    }
-}
-
-
-sub dd {
-    my $u = "usage: dd [-h] [-p] [if=<file>] [of=<file>] [bs=<number>] [count=<number>]\n";
-    my ($help, $percent) = getopts(\@_, qw(hp));
-    die $u if $help;
-    my %h = (if => *STDIN, of => *STDOUT, bs => 512, count => undef);
-    foreach (@_) {
-	/(.*?)=(.*)/ && exists $h{$1} or die $u;
-	$h{$1} = $2;
-    }
-    local (*IF, *OF); my ($tmp, $nb, $read);
-    ref $h{if} eq 'GLOB' ? *IF = $h{if} : sysopen(IF, $h{if}, 0   ) || die "error: can't open file $h{if}\n";
-    ref $h{of} eq 'GLOB' ? *OF = $h{of} : sysopen(OF, $h{of}, 0x41) || die "error: can't open file $h{of}\n";
-
-    $h{bs} = removeXiBSuffix($h{bs});
-
-    for ($nb = 0; !$h{count} || $nb < $h{count}; $nb++) {
-	printf "\r%02.1d%%", 100 * $nb / $h{count} if $h{count} && $percent;
-	$read = sysread(IF, $tmp, $h{bs}) or $h{count} ? die "error: can't read block $nb\n" : last;
-	syswrite(OF, $tmp) or die "error: can't write block $nb\n";
-	$read < $h{bs} and $read = 1, last;
-    }
-    print STDERR "\r$nb+$read records in\n";
-    print STDERR   "$nb+$read records out\n";
-}
-
-sub head_tail {
-    my ($h, $n) = getopts(\@_, qw(hn));
-    $h || @_ < to_bool($n) and die "usage: $0 [-h] [-n lines] [<file>]\n";
-    $n = $n ? shift : 10;
-    local *F; @_ ? open(F, $_[0]) || die "error: can't open file $_[0]\n" : (*F = *STDIN);
-
-    local $_;
-    if ($0 eq 'head') {
-	while (<F>) { $n-- or return; print }
-    } else {
-	@_ = (); while (<F>) { push @_, $_; @_ > $n and shift; }
-	print @_;
-    }
-}
-sub head { $0 = 'head'; &head_tail }
-sub tail { $0 = 'tail'; &head_tail }
-
-sub strings {
-    my ($h, $o, $n) = getopts(\@_, qw(hon));
-    $h and die "usage: strings [-o] [-n min-length] [<files>]\n";
-    $n = $n ? shift : 4;
-    $/ = "\0"; @ARGV = @_; my $l = 0; while (<>) {
-	while (/[$printable_chars]{$n,}/og) {
-	    printf "%07d ", ($l + length $') if $o;
-	    print "$&\n" ;
-	}
-	$l += length;
-    } continue { $l = 0 if eof }
-}
-
-sub hexdump {
-    my $i = 0; $/ = \16; @ARGV = @_; while (<>) {
-	printf "%08lX  ", $i; $i += 16;
-	print join(" ", (map { sprintf "%02X", $_ } unpack("C*", $_)),
-		   ($_ =~ s/[^$printable_chars]/./og, $_)[1]), "\n";
-    }
-}
-
-sub more {
-    @ARGV = @_;
-    require devices;
-    my $tty = devices::make('tty');
-    local *IN; open IN, "<$tty" or die "can't open $tty\n";
-    my $n = 0; while (<>) {
-	if (++$n == 25) {
-	    my $v = <IN>;
-	    $v =~ /^q/ and exit 0;
-	    $n = 0;
-	}
-	print
-    }
-}
-
-sub pack_ {
-    my $t;
-    foreach (@_) {
-	if (-d $_) {
-	    pack_(glob_($_));
-	} else {
-	    print -s $_, "\n";
-	    print $_, "\n";
-
-	    local *F;
-	    open F, $_ or die "can't read file $_: $!\n";
-	    while (read F, $t, $BUFFER_SIZE) { print $t; }
-	}
-    }
-}
-
-sub unpack_ {
-    my $t;
-    @_ == 1 or die "give me one and only one file to unpack\n";
-    local *F;
-    open F, $_[0] or die "can't open file $_: $!\n";
-    while (1) {
-	my $size = chomp_(scalar <F>);
-	defined $size or last;
-	$size =~ /^\d+$/ or die "bad format (can't find file size)\n";
-	my $filename = chomp_(scalar <F>) or die "expecting filename\n";
-
-	print "$filename\n";
-	my $dir = dirname($filename);
-	-d $dir or mkdir_p($dir);
-
-	local *G;
-	open G, "> $filename" or die "can't write file $filename: $!\n";
-	while ($size) {
-	    $size -= read(F, $t, min($size, $BUFFER_SIZE)) || die "data for file $filename is missing\n";
-	    print G $t or die "error writing to file $filename: $!\n";
-	}
-    }
-}
-
-sub insmod {
-    my ($h) = getopts(\@_, qw(h));
-    $h || @_ == 0 and die "usage: insmod <module> [options]\n";
-    my $f = local $_ = shift;
-
-    require run_program;
-
-    #- try to install the module if it exist else extract it from archive.
-    #- needed for cardmgr.
-    unless (-r $f) {
-	$_ = $1 if m@.*/([^/]*)\.o@;
-	unless (-r ($f = "/lib/modules/$_.o")) {
-	    $f = "/tmp/$_.o";
-	    my $cz = "/lib/modules" . (arch() eq 'sparc64' && "64") . ".cz"; -e $cz or $cz .= "2";
-	    if (-e $cz) {
-		eval {
-		    require packdrake;
-		    my $packer = new packdrake($cz, quiet => 1);
-		    $packer->extract_archive("/tmp", "$_.o");
-		};
-	    } elsif (-e "/lib/modules.cpio.bz2") {
-		run_program::run("cd /tmp ; $ENV{LD_LOADER} bzip2 -cd /lib/modules.cpio.bz2 | $ENV{LD_LOADER} cpio -i $_.o");
-	    } else {
-		die "unable to find an archive for modules";
-	    }
-	}
-    }
-    -r $f or die "can't find module $_";
-    run_program::run(["/usr/bin/insmod_", "insmod"], "-f", $f, @_) or die("insmod $_ failed");
-    unlink $f;
-}
-
-sub modprobe {
-    my ($h) = getopts(\@_, qw(h));
-    $h || @_ == 0 and die "usage: modprobe <module> [options]\n";
-    my $name = shift;
-    require modules;
-    modules::load_dependencies("/modules/modules.dep");
-    modules::load([ $name, @_ ]);
-}
-
-sub route {
-    @_ == 0 or die "usage: route\nsorry, no modification handled\n";
-    my ($titles, @l) = cat_("/proc/net/route");
-    my @titles = split ' ', $titles;
-    my %l;
-    open ROUTE, ">&STDOUT";
-    format ROUTE_TOP =
-Destination    Gateway        Mask           Iface
-.
-    format ROUTE =
-@<<<<<<<<<<<<  @<<<<<<<<<<<<  @<<<<<<<<<<<<  @<<<<<<<
-$l{Destination}, $l{Gateway}, $l{Mask}, $l{Iface}
-.
-    foreach (@l) {
-	/^\s*$/ and next;
-	@l{@titles} = split;
-	$_ = join ".", reverse map { hex } unpack "a2a2a2a2", $_ foreach @l{qw(Destination Gateway Mask)};
-	$l{Destination} = 'default' if $l{Destination} eq "0.0.0.0";
-	$l{Gateway}     = '*'       if $l{Gateway}     eq "0.0.0.0";
-	write ROUTE;
-    }
-}
-
-sub df {
-    my ($h) = getopts(\@_, qw(h));
-    my ($dev, $size, $free, $used, $use, $mntpoint);
-    open DF, ">&STDOUT";
-    format DF_TOP =
-Filesystem          Size      Used    Avail     Use  Mounted on
-.
-    format DF =
-@<<<<<<<<<<<<<<<< @>>>>>>> @>>>>>>> @>>>>>>> @>>>>>% @<<<<<<<<<<<<<<<<<<<<<<<<<
-$dev, $size, $used, $free, $use, $mntpoint
-.
-    my %h;
-    foreach (cat_("/proc/mounts"), cat_("/etc/mtab")) {
-	($dev, $mntpoint) = split;
-	$h{$dev} = $mntpoint;
-    }
-    foreach $dev (sort keys %h) {
-	($size, $free) = MDK::Common::System::df($mntpoint = $h{$dev});
-	$size or next;
-
-	$use = int (100 * ($size - $free) / $size);
-	$used = $size - $free;
-	if ($h) {
-	    $used = int ($used / 1024) . "M";
-	    $size = int ($size / 1024) . "M";
-	    $free = int ($free / 1024) . "M";
-	}
-	write DF if $size;
-    }
-}
-
-sub kill {
-    my $signal = 15;
-    @_ or die "usage: kill [-<signal>] pids\n";
-    $signal = (shift, $1)[1] if $_[0] =~ /^-(.*)/;
-    kill $signal, @_ or die "kill failed: $!\n";
-}
-
-sub lspci {
-    require detect_devices;
-    print join "\n", detect_devices::stringlist(1), '';
-}
-*lssbus = *lspci;
-
-sub dmesg { print cat_("/tmp/syslog"); }
-
-sub sort {
-    my ($n, $h) = getopts(\@_, qw(nh));
-    $h and die "usage: sort [-n] [<file>]\n";
-    local *F; @_ ? open(F, $_[0]) || die "error: can't open file $_[0]\n" : (*F = *STDIN);
-    if ($n) {
-	print sort { $a <=> $b } <F>;
-    } else {
-	print sort <F>;
-    }
-}
-
-sub du {
-    my ($s, $h) = getopts(\@_, qw(sh));
-    $h || !$s and die "usage: du -s [<directories>]\n";
-
-    my $f; $f = sub {
-	my ($e) = @_;
-	my $s = (lstat($e))[12];
-	$s += sum(map { &$f($_) } glob_("$e/*")) if !-l $e && -d $e;
-	$s;
-    };
-    print &$f($_) >> 1, "\t$_\n" foreach @_ ? @_ : glob_("*");
-}
-
-sub  install_cpio($$;@) {
-    my ($dir, $name, @more) = @_; 
-
-    return "$dir/$name" if -e "$dir/$name";
-
-    my $cpio = "$dir.cpio.bz2";
-    -e $cpio or return;
-
-    eval { rm("-r", $dir) };
-    mkdir $dir, 0755;
-    require run_program;
-    
-    my $more = join " ", map { $_ && "$_ $_/*" } @more;
-    run_program::run("cd $dir ; $ENV{LD_LOADER} bzip2 -cd $cpio | $ENV{LD_LOADER} cpio -id $name $name/* $more");
-
-    "$dir/$name";
-}
-
-sub bug {
-    my ($h) = getopts(\@_, "h");
-    $h and die "usage: bug\nput file report.bug on fat formatted floppy\n";
-
-    require detect_devices;
-    mount devices::make(detect_devices::floppy()), "/fd0";
-
-    require install_any;
-    output("/fd0/report.bug", install_any::report_bug("/mnt")); #- no other way :-(
-    umount "/fd0";
-    common::sync();
-}
-
-sub loadkeys {
-    my ($h) = getopts(\@_, "h");
-    $h || @_ != 1 and die "usage: loadkeys <keyboard>\n";
-
-    require keyboard;
-    keyboard::setup($_[0]);
-}
-
-sub sync { common::sync() }
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
-
diff --git a/perl-install/common.pm b/perl-install/common.pm
deleted file mode 100644
index f39cda588..000000000
--- a/perl-install/common.pm
+++ /dev/null
@@ -1,172 +0,0 @@
-package common; # $Id$
-
-use MDK::Common;
-use MDK::Common::System;
-use diagnostics;
-use strict;
-use vars qw(@ISA @EXPORT $SECTORSIZE);
-
-@ISA = qw(Exporter);
-# no need to export ``_''
-@EXPORT = qw($SECTORSIZE __ translate untranslate formatXiB removeXiBSuffix formatTime setVirtual makedev unmakedev salt);
-
-# perl_checker: RE-EXPORT-ALL
-push @EXPORT, @MDK::Common::EXPORT;
-
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-$SECTORSIZE      = 512;
-
-#-#####################################################################################
-#- Functions
-#-#####################################################################################
-
-
-sub _ {
-    my $s = shift @_; my $t = translate($s);
-    sprintf $t, @_;
-}
-sub __ { $_[0] }
-
-sub salt {
-    my ($nb) = @_;
-    require devices;
-    local *F;
-    open F, devices::make("random") or die "missing random";
-    my $s; read F, $s, $nb;
-    local $_ = pack "b8" x $nb, unpack "b6" x $nb, $s;
-    tr [\0-\x3f] [0-9a-zA-Z./];
-    $_;
-}
-
-sub makedev { ($_[0] << 8) | $_[1] }
-sub unmakedev { $_[0] >> 8, $_[0] & 0xff }
-
-sub translate {
-    my ($s) = @_;
-    $s ? c::dgettext('libDrakX', $s) : '';
-}
-
-sub untranslate {
-    my $s = shift || return;
-    foreach (@_) { translate($_) eq $s and return $_ }
-    die "untranslate failed";
-}
-
-BEGIN { undef *availableRamMB }
-sub availableRamMB()  { 
-    my $s = MDK::Common::System::availableRamMB();
-    #- HACK HACK: if i810 and memsize
-    require detect_devices;
-    return $s - 1 if $s == 128 && grep { $_->{driver} =~ /i810/ } detect_devices::probeall();
-    $s;
-}
-
-sub setVirtual {
-    my $vt = '';
-    local *C;
-    sysopen C, "/dev/console", 2 or die "failed to open /dev/console: $!";
-    ioctl(C, c::VT_GETSTATE(), $vt) or die "ioctl VT_GETSTATE failed";
-    ioctl(C, c::VT_ACTIVATE(), $_[0]) or die "ioctl VT_ACTIVATE failed";
-    ioctl(C, c::VT_WAITACTIVE(), $_[0]) or die "ioctl VT_WAITACTIVE failed";
-    unpack "S", $vt;
-}
-
-
-sub removeXiBSuffix {
-    local $_ = shift;
-
-    /(\d+)\s*kB?$/i and return $1 * 1024;
-    /(\d+)\s*MB?$/i and return $1 * 1024 * 1024;
-    /(\d+)\s*GB?$/i and return $1 * 1024 * 1024 * 1024;
-    /(\d+)\s*TB?$/i and return $1 * 1024 * 1024 * 1024 * 1024;
-    $_;
-}
-sub formatXiB {
-    my ($newnb, $newbase) = (@_, 1);
-    my ($nb, $base);
-    my $decr = sub { 
-	($nb, $base) = ($newnb, $newbase);
-	$base >= 1024 ? ($newbase = $base / 1024) : ($newnb = $nb / 1024);
-    };
-    foreach ('', _("KB"), _("MB"), _("GB")) {
-	$decr->(); 
-	if ($newnb < 1 && $newnb * $newbase < 1) {
-	    my $v = $nb * $base;
-	    my $s = $v < 10 && int(10 * $v - 10 * int($v));
-	    return int($v) . ($s ? ".$s" : '') . $_;
-	}
-    }
-    int($newnb * $newbase) . _("TB");
-}
-
-sub formatTime {
-    my ($s, $m, $h) = gmtime($_[0]);
-    if ($h) {
-	sprintf "%02d:%02d", $h, $m;
-    } elsif ($m > 1) {
-	_("%d minutes", $m);
-    } elsif ($m == 1) {
-	_("1 minute");
-    } else {
-	_("%d seconds", $s);
-    }
-}
-
-sub usingRamdisk { scalar(grep { /ram3/ } cat_("/proc/mounts")) }
-
-sub expand_symlinks_but_simple {
-    my ($f) = @_;
-    my $link = readlink($f);
-    my $f2 = expand_symlinks($f);
-    if ($link && $link !~ m|/|) {
-	# put back the last simple symlink
-	$f2 =~ s|\Q$link\E$|basename($f)|e;
-    }
-    $f2
-}
-
-sub sync { &MDK::Common::System::sync }
-
-# Group the list by n. Returns a reference of lists of length n
-sub group_n_lm {
-    my $n = shift;
-    my @l;
-    push @l, [ splice(@_, 0, $n) ] while (@_);
-    @l
-}
-
-sub screenshot_dir__and_move {
-    my ($dir1, $dir2) = ("$::o->{prefix}/root", '/tmp/stage2');
-    if (-e $dir1) {
-	if (-e "$dir2/DrakX-screenshots") {
-	    cp_af("$dir2/DrakX-screenshots", $dir1);
-	    rm_rf("$dir2/DrakX-screenshots");
-	}
-	$dir1;
-    } else {
-	$dir2;
-    }
-}
-
-sub take_screenshot {
-    my ($in) = @_;
-    my $dir = screenshot_dir__and_move() . '/DrakX-screenshots';
-    my $warn;
-    if (!-e $dir) {
-	mkdir $dir or $in->ask_warn('', _("Can't make screenshots before partitioning")), return;
-	$warn = 1;
-    }
-    my $nb = 1;
-    $nb++ while -e "$dir/$nb.png";
-    system("fb2png /dev/fb0 $dir/$nb.png 0");
-
-    $in->ask_warn('', _("Screenshots will be available after install in %s", "/root/DrakX-screenshots")) if $warn;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/crypto.pm b/perl-install/crypto.pm
deleted file mode 100644
index 6a33baff2..000000000
--- a/perl-install/crypto.pm
+++ /dev/null
@@ -1,167 +0,0 @@
-package crypto; # $Id$
-
-use diagnostics;
-use strict;
-
-use MDK::Common::System;
-use common;
-use log;
-use ftp;
-
-my %url2land = (
-		fr => _("France"),
-		cr => _("Costa Rica"),
-		be => _("Belgium"),
-		cz => _("Czech Republic"),
-		de => _("Germany"),
-		gr => _("Greece"),
-		no => _("Norway"),
-		se => _("Sweden"),
-		nl => _("Netherlands"),
-		it => _("Italy"),
-		at => _("Austria"),
-	       );
-
-my %land2tzs = (
-		_("France") => [ 'Europe/Paris', 'Europe/Brussels', 'Europe/Berlin' ],
-		_("Belgium") => [ 'Europe/Brussels', 'Europe/Paris', 'Europe/Berlin' ],
-		_("Czech Republic") => [ 'Europe/Prague', 'Europe/Berlin' ],
-		_("Germany") => [ 'Europe/Berlin', 'Europe/Prague' ],
-		_("Greece") => [ 'Europe/Athens', 'Europe/Prague' ],
-		_("Norway") => [ 'Europe/Oslo', 'Europe/Stockholm' ],
-		_("Sweden") => [ 'Europe/Stockholm', 'Europe/Oslo' ],
-		_("United States") => [ 'America/New_York', 'Canada/Atlantic', 'Asia/Tokyo', 'Australia/Sydney', 'Europe/Paris' ],
-		_("Netherlands") => [ 'Europe/Amsterdam', 'Europe/Brussels', 'Europe/Berlin' ],
-		_("Italy") => [ 'Europe/Rome', 'Europe/Brussels', 'Europe/Paris' ],
-		_("Austria") => [ 'Europe/Vienna', 'Europe/Brussels', 'Europe/Berlin' ],
-	       );
-
-my %static_mirrors = (
-#		      "ackbar" => [ "Ackbar", "/updates", "a", "a" ],
-		     );
-
-my %mirrors = ();
-
-my %deps = (
-  'libcrypto.so.0' => 'openssl',
-  'libssl.so.0' => 'openssl',
-  'mod_sxnet.so' => 'mod_ssl-sxnet',
-);
-
-sub require2package { $deps{$_[0]} || $_[0] }
-sub mirror2text { $mirrors{$_[0]} && ($mirrors{$_[0]}[0] . '|' . $_[0]) }
-
-sub mirrors {
-    unless (keys %mirrors) {
-	#- contact the following URL to retrieve list of mirror.
-	#- http://www.linux-mandrake.com/mirrorsfull.list
-	require http;
-	my $f = http::getFile("http://www.linux-mandrake.com/mirrorsfull.list");
-
-	local $SIG{ALRM} = sub { die "timeout" };
-	alarm 60; 
-	foreach (<$f>) {
-	    my ($arch, $url, $dir) = m|updates([^:]*):ftp://([^/]*)(/\S*)| or next;
-	    MDK::Common::System::compat_arch($arch) or
-		log::l("ignoring updates from $url because of incompatible arch: $arch"), next;
-	    my $land = _("United States");
-	    foreach (keys %url2land) {
-		my $qu = quotemeta $_;
-		$url =~ /\.$qu(?:\..*)?$/ and $land = $url2land{$_};
-	    }
-	    $mirrors{$url} = [ $land, $dir ];
-	}
-	http::getFile('/XXX'); #- close connection.
-	alarm 0; 
-
-	#- now add static mirror (in case of something wrong happened above).
-	add2hash(\%mirrors, \%static_mirrors);
-    }
-    keys %mirrors;
-}
-
-sub bestMirror {
-    my ($string) = @_;
-    my %mirror2value;
-
-    foreach my $url (mirrors()) {
-	my $value = 0;
-	my $cvalue = mirrors();
-
-	$mirror2value{$url} ||= 1 + $cvalue;
-	foreach (@{$land2tzs{$mirrors{$url}[0]} || []}) {
-	    $_ eq $string and $mirror2value{$url} > $value and $mirror2value{$url} = $value;
-	    (split '/')[0] eq (split '/', $string)[0] and $mirror2value{$url} > $cvalue and $mirror2value{$url} = $cvalue;
-	    ++$value;
-	}
-    }
-    my ($min_value) = sort { $a <=> $b } values %mirror2value;
-
-    my @possible = grep { $mirror2value{$_} == $min_value } keys %mirror2value;
-    push @possible, grep { $mirror2value{$_} == $min_value } keys %mirror2value;
-    push @possible, grep { $mirror2value{$_} == 1 + $min_value } keys %mirror2value;
-
-    $possible[rand @possible];
-}
-
-#- hack to retrieve Mandrake Linux version...
-sub version {
-    require pkgs;
-    my $pkg = pkgs::packageByName($::o->{packages}, 'mandrake-release');
-    $pkg && pkgs::packageVersion($pkg) || '8.2'; #- safe but dangerous ;-)
-}
-
-sub dir { $mirrors{$_[0]}[1] . '/' . version() }
-sub ftp($) { ftp::new($_[0], dir($_[0])) }
-
-sub getFile {
-    my ($file, $host) = @_;
-    $host ||= $crypto::host;
-    my $dir = dir($host) . ($file =~ /\.rpm$/ && "/RPMS");
-    log::l("getting crypto file $file on directory $dir with login $mirrors{$host}[2]");
-    my ($ftp, $retr) = ftp::new($host, $dir,
-				$mirrors{$host}[2] ? $mirrors{$host}[2] : (),
-				$mirrors{$host}[3] ? $mirrors{$host}[3] : ()
-			       );
-    $$retr->close if $$retr;
-    $$retr   = $ftp->retr($file) or ftp::rewindGetFile();
-    $$retr ||= $ftp->retr($file);
-}
-
-sub getDepslist { getFile("depslist-crypto", $_[0]) or die "unable to get depslist-crypto" }
-
-sub getPackages {
-    my ($prefix, $packages, $mirror) = @_;
-
-    $crypto::host = $mirror;
-
-    #- check first if there is something to get...
-    my $fhdlist = getFile("base/hdlist.cz", $mirror);
-    unless ($fhdlist) {
-	log::l("no updates available, bailing out");
-	return;
-    }
-    
-    #- extract hdlist of crypto, then depslist.
-    require pkgs;
-    my $update_medium = pkgs::psUsingHdlist($prefix, 'ftp', $packages, "hdlist-updates.cz", "1u", "RPMS",
-					    "Updates for Mandrake Linux " . version(), 1, $fhdlist) and
-					      log::l("read updates hdlist");
-    #- keep in mind where is the URL prefix used according to mirror (for install_any::install_urpmi).
-    $update_medium->{prefix} = "ftp://$mirror" . dir($mirror);
-    #- (re-)enable the medium to allow install of package,
-    #- make it an update medium (for install_any::install_urpmi).
-    $update_medium->{selected} = 1;
-    $update_medium->{update} = 1;
-
-    return $update_medium;
-}
-
-sub get {
-    my ($mirror, $dir, @files) = @_;
-    foreach (@files) {
-	log::l("crypto: downloading $_");
-	ftp($mirror)->get($_, "$dir/$_") 
-    }
-    int @files;
-}
diff --git a/perl-install/detect_devices.pm b/perl-install/detect_devices.pm
deleted file mode 100644
index 893161f08..000000000
--- a/perl-install/detect_devices.pm
+++ /dev/null
@@ -1,597 +0,0 @@
-package detect_devices; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($pcitable_addons $usbtable_addons);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use log;
-use common;
-use devices;
-use run_program;
-use c;
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-my @netdevices = map { my $l = $_; map { "$l$_" } (0..3) } qw(eth tr fddi plip);
-my %serialprobe = ();
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub dev_is_devfs { -e "/dev/.devfsd" }
-
-
-sub get {
-    #- Detect the default BIOS boot harddrive is kind of tricky. We may have IDE,
-    #- SCSI and RAID devices on the same machine. From what I see so far, the default
-    #- BIOS boot harddrive will be
-    #- 1. The first IDE device if IDE exists. Or
-    #- 2. The first SCSI device if SCSI exists. Or
-    #- 3. The first RAID device if RAID exists.
-
-    getIDE(), getSCSI(), getDAC960(), getCompaqSmartArray(), getATARAID();
-}
-sub hds         { grep { $_->{media_type} eq 'hd' && ($::isStandalone || !isRemovableDrive($_)) } get() }
-sub tapes       { grep { $_->{media_type} eq 'tape' && ($::isStandalone || !isRemovableDrive($_)) } get() }
-sub cdroms      { grep { $_->{media_type} eq 'cdrom' } get() }
-sub burners     { grep { isBurner($_) } cdroms() }
-sub dvdroms     { grep { isDvdDrive($_) } cdroms() }
-sub raw_zips    { grep { member($_->{media_type}, 'fd', 'hd') && isZipDrive($_) } get() }
-#-sub jazzs     { grep { member($_->{media_type}, 'fd', 'hd') && isJazzDrive($_) } get() }
-sub ls120s      { grep { member($_->{media_type}, 'fd', 'hd') && isLS120Drive($_) } get() }
-sub zips        { map { $_->{device} .= 4; $_ } raw_zips() }
-
-sub cdroms__faking_ide_scsi {
-    my @l = cdroms();
-    return @l if $::isStandalone;
-    if (my @l_ide = grep { $_->{interface_type} eq 'ide' && isBurner($_) } @l) {
-	require modules;
-	modules::add_alias('scsi_hostadapter', 'ide-scsi');
-	my $nb = 1 + max(-1, map { $_->{device} =~ /scd(\d+)/ } @l);
-	foreach my $e (@l_ide) {	    
-	    log::l("IDEBurner: $e->{device}");
-	    $e->{device} = "scd" . $nb++;
-	}
-    }
-    @l;
-}
-sub zips__faking_ide_scsi {
-    my @l = raw_zips();
-    if (my @l_ide = grep { $_->{interface_type} eq 'ide' && $::isInstall } @l) {
-	require modules;
-	modules::add_alias('scsi_hostadapter', 'ide-scsi');
-	my $nb = 1 + max(-1, map { if_($_->{device} =~ /sd(\w+)/, ord($1) - ord('a')) } getSCSI());
-	foreach my $e (@l_ide) {	    
-	    my $faked = "sd" . chr(ord('a') + $nb++);
-	    log::l("IDE Zip: $e->{device} => $faked");
-	    $e->{device} = $faked;
-	}
-    }
-    map { $_->{device} .= 4; $_ } @l;
-}
-
-sub floppies() {
-    require modules;
-    eval { modules::load("floppy") };
-    my @fds = map {
-	my $info = (!dev_is_devfs() || -e "/dev/$_") && c::floppy_info(devices::make($_));
-	if_($info && $info ne '(null)', { device => $_, media_type => 'fd', info => $info })
-    } qw(fd0 fd1);
-    my @ide = ls120s() and eval { modules::load("ide-floppy") };
-
-    eval { modules::load("usb-storage") } if usbStorage();
-    my @scsi = grep { $_->{media_type} eq 'fd' && !isZipDrive($_) && !isJazzDrive($_) } getSCSI();
-    @ide, @scsi, @fds;
-}
-sub floppies_dev() { map { $_->{device} } floppies() }
-sub floppy { first(floppies_dev()) }
-#- example ls120, model = "LS-120 SLIM 02 UHD Floppy"
-
-sub get_sys_cdrom_info {
-    my (@drives) = @_;
-
-    my @drives_order;
-    foreach (cat_("/proc/sys/dev/cdrom/info")) {
-	my ($t, $l) = split ':';
-	my @l = split ' ', $l;
-	if ($t eq 'drive name') {
-	    @drives_order = map {
-		s/^sr/scd/;
-		my $dev = $_;
-		first(grep { $_->{device} eq $dev } @drives);
-	    } @l;
-	} else {
-	    my $capacity;
-	    if ($t eq 'Can write CD-R') {
-		$capacity = 'burner';
-	    } elsif ($t eq 'Can read DVD') {
-		$capacity = 'DVD';
-	    }
-	    if ($capacity) {
-		each_index {
-		    ($drives_order[$::i] || {})->{capacity} .= "$capacity " if $_;
-		} @l;
-	    }
-	}
-    }
-}
-
-sub isBurner { 
-    my ($e) = @_;
-    $e->{capacity} =~ /burner/ and return 1;
-      
-    #- do not work for SCSI
-    my $f = tryOpen($e->{device}); #- SCSI burner are not detected this way.
-    $f && c::isBurner(fileno($f));
-}
-sub isDvdDrive {
-    my ($e) = @_;
-    $e->{capacity} =~ /DVD/ || $e->{info} =~ /DVD/ and return 1;
-
-    #- do not work for SCSI
-    my $f = tryOpen($e->{device});
-    $f && c::isDvdDrive(fileno($f));
-}
-sub isZipDrive { $_[0]->{info} =~ /ZIP\s+\d+/ } #- accept ZIP 100, untested for bigger ZIP drive.
-sub isJazzDrive { $_[0]->{info} =~ /\bJAZZ?\b/i } #- accept "iomega jaz 1GB"
-sub isLS120Drive { $_[0]->{info} =~ /LS-?120|144MB/ }
-sub isRemovableDrive { &isZipDrive || &isLS120Drive || $_[0]->{media_type} eq 'fd' } #-or &isJazzDrive }
-
-sub isFloppyOrHD {
-    my ($dev) = @_;
-    require partition_table_raw;
-    my $geom = partition_table_raw::get_geometry(devices::make($dev));
-    $geom->{totalsectors} < 10 << 11 ? 'fd' : 'hd';
-}
-
-sub getSCSI() {
-    my @drives;
-    my ($driveNum, $cdromNum, $tapeNum) = qw(0 0 0);
-    my $err = sub { chop; die "unexpected line in /proc/scsi/scsi: $_"; };
-    local $_;
-
-    local *F;
-    open F, "/proc/scsi/scsi" or return;
-    local $_ = <F>; /^Attached devices:/ or return &$err();
-    while ($_ = <F>) {
-	my ($id) = /^Host:.*?Id: (\d+)/ or return &$err();
-	$_ = <F>; my ($vendor, $model) = /^\s*Vendor:\s*(.*?)\s+Model:\s*(.*?)\s+Rev:/ or return &$err();
-	$_ = <F>; my ($type) = /^\s*Type:\s*(.*)/ or &$err();
-	my $dev = { info => "$vendor $model", id => $id, bus => 0 };
-	if ($type =~ /Direct-Access/) {
-	    $dev->{device} = "sd" . chr($driveNum++ + ord('a'));
-	    $dev->{media_type} = isZipDrive($dev) ? 'hd' : isFloppyOrHD($dev->{device});
-	} elsif ($type =~ /Sequential-Access/) {
-	    $dev->{device} = "st" . $tapeNum++;
-	    $dev->{media_type} = 'tape';
-	} elsif ($type =~ /(CD-ROM|WORM)/) {
-	    $dev->{device} = "scd" . $cdromNum++;
-	    $dev->{media_type} = 'cdrom';
-	}
-	push @drives, $dev if $dev->{device};
-    }
-    get_sys_cdrom_info(@drives);
-    @drives;
-}
-
-sub getIDE() {
-    my @idi;
-
-    #- what about a system with absolutely no IDE on it, like some sparc machine.
-    -e "/proc/ide" or return ();
-
-    #- Great. 2.2 kernel, things are much easier and less error prone.
-    foreach my $d (sort @{[glob_('/proc/ide/hd*')]}) {
-	cat_("$d/driver") =~ /ide-scsi/ and next; #- already appears in /proc/scsi/scsi
-	my $t = chomp_(cat_("$d/media"));
-	my $type = $ {{disk => 'hd', cdrom => 'cdrom', tape => 'tape', floppy => 'fd'}}{$t} or next;
-	my $info = chomp_(cat_("$d/model")) || "(none)";
-
-	my $num = ord (($d =~ /(.)$/)[0]) - ord 'a';
-	push @idi, { media_type => $type, device => basename($d), info => $info, bus => $num/2, id => $num%2, interface_type => 'ide' };
-    }
-    get_sys_cdrom_info(@idi);
-    @idi;
-}
-
-sub getCompaqSmartArray() {
-    my (@idi, $f);
-
-    foreach ('array/ida', 'cpqarray/ida', 'cciss/cciss') {
-	my $prefix = "/proc/driver/$_"; #- kernel 2.4 places it here
-	$prefix = "/proc/$_" if !-e "${prefix}0"; #- kernel 2.2
-
-	my ($name) = m|/(.*)|;
-	for (my $i = 0; -r ($f = "${prefix}$i"); $i++) {
-	    foreach (cat_($f)) {
-		if (m|^\s*($name/.*?):|) {
-		    push @idi, { device => $1, info => "Compaq RAID logical disk", media_type => 'hd', interface_type => 'ida' };
-		}
-	    }
-	}
-    }
-    @idi;
-}
-
-sub getDAC960() {
-    my %idi;
-
-    #- We are looking for lines of this format:DAC960#0:
-    #- /dev/rd/c0d0: RAID-7, Online, 17928192 blocks, Write Thru0123456790123456789012
-    foreach (syslog()) {
-	my ($device, $info) = m|/dev/(rd/.*?): (.*?),| or next;
-	$idi{$device} = { info => $info, media_type => 'hd', device => $device, interface_type => 'dac960' };
-    }
-    values %idi;
-}
-
-sub getATARAID {
-    my %l;
-    foreach (syslog()) {
-	my ($device) = m|^\s*(ataraid/d\d+):| or next;
-	$l{$device} = { info => 'ATARAID block device', media_type => 'hd', device => $device, interface_type => 'ataraid' };
-	log::l("ATARAID: $device");
-    }
-    values %l;
-}
-
-sub getNet() {
-    grep { !(($::isStandalone || $::live) && /plip/) && c::hasNetDevice($_) } @netdevices;
-}
-
-#sub getISDN() {
-#    mapgrep(sub {member (($_[0] =~ /\s*(\w*):/), @netdevices), $1 }, split(/\n/, cat_("/proc/net/dev")));
-#}
-
-$pcitable_addons = <<'EOF';
-# add here lines conforming the pcitable format (0xXXXX\t0xXXXX\t"\w+"\t".*")
-EOF
-
-$usbtable_addons = <<'EOF';
-# add here lines conforming the usbtable format (0xXXXX\t0xXXXX\t"\w+"\t".*")
-EOF
-
-sub add_addons {
-    my ($addons, @l) = @_;
-
-    foreach (split "\n", $addons) {
-	/^\s/ and die "bad detect_devices::probeall_addons line \"$_\"";
-	s/^#.*//;
-	s/"(.*?)"/$1/g;
-	next if /^$/;
-	my ($vendor, $id, $driver, $description) = split("\t", $_, 4) or die "bad detect_devices::probeall_addons line \"$_\"";
-	foreach (@l) {
-	    $_->{vendor} == hex $vendor && $_->{id} == hex $id or next;
-	    put_in_hash($_, { driver => $driver, description => $description });
-	}
-    }
-    @l;
-}
-
-sub pci_probe {
-    my ($probe_type) = @_;
-    log::l("full pci_probe") if $probe_type;
-    add_addons($pcitable_addons, map {
-	my %l;
-	@l{qw(vendor id subvendor subid pci_bus pci_device pci_function media_type driver description)} = split "\t";
-	$l{$_} = hex $l{$_} foreach qw(vendor id subvendor subid);
-	$l{bus} = 'PCI';
-	\%l
-    } c::pci_probe($probe_type || 0));
-}
-
-sub usb_probe {
-    -e "/proc/bus/usb/devices" or return ();
-
-    add_addons($usbtable_addons, map {
-	my %l;
-	@l{qw(vendor id media_type driver description)} = split "\t";
-	$l{$_} = hex $l{$_} foreach qw(vendor id);
-	$l{bus} = 'USB';
-	\%l
-    } c::usb_probe());
-}
-
-sub pcmcia_probe {
-    -e '/var/run/stab' || -e '/var/lib/pcmcia/stab' or return ();
-
-    my (@devs, $desc);
-    foreach (cat_('/var/run/stab'), cat_('/var/lib/pcmcia/stab')) {
-	if (/^Socket\s+\d+:\s+(.*)/) {
-	    $desc = $1;
-	} else {
-	    my (undef, $type, $module, undef, $device) = split;
-	    push @devs, { description => $desc, driver => $module, type => $type, device => $device };
-	}
-    }
-    @devs;
-}
-
-# pci_probe with $probe_type is unsafe for pci! (bug in kernel&hardware)
-# pcmcia_probe provides field "device", used in network.pm
-# => probeall with $probe_type is unsafe
-sub probeall {
-    my ($probe_type) = @_;
-    require sbus_probing::main;
-    pci_probe($probe_type), usb_probe(), pcmcia_probe(), sbus_probing::main::probe();
-}
-sub matching_desc {
-    my ($regexp) = @_;
-    grep { $_->{description} =~ /$regexp/i } probeall();
-}
-sub stringlist { 
-    map {
-	sprintf("%-16s: %s%s%s", 
-		$_->{driver} ? $_->{driver} : 'unknown', 
-		$_->{description} eq '(null)' ? sprintf("Vendor=0x%04x Device=0x%04x", $_->{vendor}, $_->{id}) : $_->{description},
-		$_->{media_type} ? sprintf(" [%s]", $_->{media_type}) : '',
-		$_->{subid} && $_->{subid} != 0xffff ? sprintf(" SubVendor=0x%04x SubDevice=0x%04x", $_->{subvendor}, $_->{subid}) : '',
-	       );
-    } probeall(@_); 
-}
-
-sub tryOpen($) {
-    local *F;
-    sysopen F, devices::make($_[0]), c::O_NONBLOCK() and *F;
-}
-
-sub tryWrite($) {
-    local *F;
-    sysopen F, devices::make($_[0]), 1 | c::O_NONBLOCK() and *F;
-}
-
-sub syslog {
-    -r "/tmp/syslog" and return map { /<\d+>(.*)/ } cat_("/tmp/syslog");
-    `$ENV{LD_LOADER} /bin/dmesg`;
-}
-
-sub get_mac_model() {
-    my $mac_model = cat_("/proc/device-tree/model") || die "Can't open /proc/device-tree/model";
-    log::l("Mac model: $mac_model");
-    $mac_model;	
-}
-
-sub get_mac_generation() {
-    my $generation = cat_("/proc/cpuinfo") || die "Can't open /proc/cpuinfo";
-    my @genarray = split(/\n/, $generation);
-    my $count = 0;
-    while ($count <= @genarray) {
-	if ($genarray[$count] =~ /pmac-generation/) {
-	    @genarray = split(/:/, $genarray[$count]);
-	    return $genarray[1];
-	}
-	$count++;
-    }
-    return "Unknown Generation";	
-}
-
-sub hasSMP { c::detectSMP() }
-sub hasPCMCIA { $::o->{pcmcia} } #- because /proc/pcmcia seems not to be present on 2.4 at least (or use /var/run/stab)
-
-#- try to detect a laptop, we assume pcmcia service is an indication of a laptop or
-#- the following regexp to match graphics card apparently only used for such systems.
-sub isLaptop {
-    hasPCMCIA() || (matching_desc('C&T.*655[45]\d') || matching_desc('C&T.*68554') ||
-		    matching_desc('Neomagic.*Magic(Media|Graph)') ||
-		    matching_desc('ViRGE.MX') || matching_desc('S3.*Savage.*[IM]X') ||
-		    matching_desc('ATI.*(Mobility|LT)'));
-}
-
-sub hasUltra66 {
-    die "hasUltra66 deprecated";
-    #- keep it BUT DO NOT USE IT as now included in kernel.
-    cat_("/proc/cmdline") =~ /(ide2=(\S+)(\s+ide3=(\S+))?)/ and return $1;
-
-    my @l = map { $_->{verbatim} } matching_desc('HPT|Ultra66') or return;
-    
-    my $ide = sprintf "ide2=0x%x,0x%x ide3=0x%x,0x%x",
-      @l == 2 ?
-	(map_index { hex($_) + (odd($::i) ? 1 : -1) } map { (split ' ')[3..4] } @l) :
-	(map_index { hex($_) + (odd($::i) ? 1 : -1) } map { (split ' ')[3..6] } @l);
-
-    log::l("HPT|Ultra66: found $ide");
-    $ide;
-}
-
-sub whatParport() {
-    my @res = ();
-    foreach (0..3) {
-	my $elem = {};
-	local *F;
-	open F, "/proc/parport/$_/autoprobe" or open F, "/proc/sys/dev/parport/parport$_/autoprobe" or next;
-	{
-	    local $_;
-	    while (<F>) { 
-		if (/(.*):(.*);/) {
-		    $elem->{$1} = $2;
-		    $elem->{$1} =~ s/Hewlett[-\s_]Packard/HP/;
-		    $elem->{$1} =~ s/HEWLETT[-\s_]PACKARD/HP/;
-		}
-	    }
-	}
-	push @res, { port => "/dev/lp$_", val => $elem};
-    }
-    @res;
-}
-
-sub usbMice      { grep { ($_->{media_type} =~ /\|Mouse/ || $_->{driver} =~ /Mouse:USB/) &&
-			    $_->{driver} !~ /Tablet:wacom/} usb_probe() };
-sub usbWacom     { grep { $_->{driver} =~ /Tablet:wacom/ } usb_probe() }
-sub usbKeyboards { grep { $_->{media_type} =~ /\|Keyboard/ } usb_probe() }
-sub usbStorage   { grep { $_->{media_type} =~ /Mass Storage\|/ } usb_probe() }
-
-sub whatUsbport() {
-    # The printer manufacturer and model names obtained with the usb_probe()
-    # function were very messy, once there was a lot of noise around the
-    # manufacturers name ("Inc.", "SA", "International", ...) and second,
-    # all Epson inkjets answered with the name "Epson Stylus Color 760" which
-    # lead many newbies to install their Epson Stylus Photo XXX as an Epson
-    # Stylus Color 760 ...
-    #
-    # This routine based on an ioctl request gives very clean and correct
-    # manufacturer and model names, so that they are easily matched to the
-    # printer entries in the Foomatic database
-    my $i; 
-    my @res = ();
-    foreach $i (0..15) {
-	my $port = "/dev/usb/lp$i";
-	my $realport = devices::make("$port");
-	next if (!$realport);
-	next if (! -r $realport);
-	open PORT, "$realport" or do next;
-	my $idstr = "";
-	# Calculation of IOCTL function 0x84005001 (to get device ID
-	# string):
-	# len = 1024
-	# IOCNR_GET_DEVICE_ID = 1
-	# LPIOC_GET_DEVICE_ID(len) =
-	#     _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
-	# _IOC(), _IOC_READ as defined in /usr/include/asm/ioctl.h
-	# Use "eval" so that program does not stop when IOCTL fails
-	eval{ my $output = "\0" x 1024; 
-	      ioctl(PORT, 0x84005001, $output);
-	      $idstr = $output; } or do {
-		  close PORT;
-		  next;
-	      };
-	close PORT;
-	# Remove non-printable characters
-	$idstr =~ tr/[\x00-\x1f]/\./;
-	# Extract the printer data from the ID string
-	my ($manufacturer, $model, $description) = ("", "", "");
-	if (($idstr =~ /MFG:([^;]+);/) ||
-	    ($idstr =~ /MANUFACTURER:([^;]+);/)) {
-	    $manufacturer = $1;
-	    $manufacturer =~ s/Hewlett[-\s_]Packard/HP/;
-	    $manufacturer =~ s/HEWLETT[-\s_]PACKARD/HP/;
-	}
-	if (($idstr =~ /MDL:([^;]+);/) ||
-	    ($idstr =~ /MODEL:([^;]+);/)) {
-	    $model = $1;
-	}
-	if (($idstr =~ /DES:([^;]+);/) ||
-	    ($idstr =~ /DESCRIPTION:([^;]+);/)) {
-	    $description = $1;
-	    $description =~ s/Hewlett[-\s_]Packard/HP/;
-	    $description =~ s/HEWLETT[-\s_]PACKARD/HP/;
-	}
-	# Was there a manufacturer and a model in the string?
-	if (($manufacturer eq "") || ($model eq "")) {
-	    next;
-	}
-	# No description field? Make one out of manufacturer and model.
-	if ($description eq "") {
-	    $description = "$manufacturer $model";
-	}
-	# Store this auto-detection result in the data structure
-	push @res, { port => $port, val => 
-		     { CLASS => 'PRINTER',
-		       MODEL => $model,
-		       MANUFACTURER => $manufacturer,
-		       DESCRIPTION => $description,
-		   }};
-    }
-    @res;
-}
-
-#-CLASS:PRINTER;
-#-MODEL:HP LaserJet 1100;
-#-MANUFACTURER:Hewlett-Packard;
-#-DESCRIPTION:HP LaserJet 1100 Printer;
-#-COMMAND SET:MLC,PCL,PJL;
-sub whatPrinter() {
-    my @res = (whatParport(), whatUsbport());
-    grep { $_->{val}{CLASS} eq "PRINTER"} @res;
-}
-
-sub whatPrinterPort() {
-    grep { tryWrite($_)} qw(/dev/lp0 /dev/lp1 /dev/lp2 /dev/usb/lp0 /dev/usb/lp1 /dev/usb/lp2 /dev/usb/lp3 /dev/usb/lp4 /dev/usb/lp5 /dev/usb/lp6 /dev/usb/lp7 /dev/usb/lp8 /dev/usb/lp9);
-}
-
-sub probeSerialDevices {
-    #- make sure the device are created before probing.
-    foreach (0..3) { devices::make("/dev/ttyS$_") }
-
-    #- for device already probed, we can safely (assuming device are
-    #- not moved during install :-)
-    #- include /dev/mouse device if using an X server.
-    -d "/var/lock" or mkdir "/var/lock", 0755;
-    -l "/dev/mouse" and $serialprobe{"/dev/" . readlink "/dev/mouse"} = undef;
-    foreach (keys %serialprobe) { m|^/dev/(.*)| and touch "/var/lock/LCK..$1" }
-
-    print STDERR "Please wait while probing serial ports...\n";
-    #- start probing all serial ports... really faster than before ...
-    #- ... but still take some time :-)
-    local *F; open F, "$ENV{LD_LOADER} serial_probe |";
-    local $_;
-    my %current = (); while (<F>) {
-	$serialprobe{$current{DEVICE}} = { %current } and %current = () if /^\s*$/ && $current{DEVICE};
-	$current{$1} = $2 if /^([^=]+)=(.*?)\s*$/;
-    }
-    close F;
-
-    foreach (values %serialprobe) {
-	$_->{DESCRIPTION} =~ /modem/i and $_->{CLASS} = 'MODEM'; #- hack to make sure a modem is detected.
-	$_->{DESCRIPTION} =~ /olitec/i and $_->{CLASS} = 'MODEM'; #- hack to make sure such modem gets detected.
-	log::l("probed $_->{DESCRIPTION} of class $_->{CLASS} on device $_->{DEVICE}");
-    }
-}
-
-sub probeSerial($) { $serialprobe{$_[0]} }
-
-sub hasModem($) {
-    $serialprobe{$_[0]} and $serialprobe{$_[0]}{CLASS} eq 'MODEM' and $serialprobe{$_[0]}{DESCRIPTION};
-}
-
-sub hasMousePS2 {
-    my $t; sysread(tryOpen($_[0]) || return, $t, 256) != 1 || $t ne "\xFE";
-}
-
-sub raidAutoStartIoctl {
-    local *F;
-    sysopen F, devices::make("md0"), 2 or return;
-    ioctl F, 2324, 0;
-}
-
-sub raidAutoStartRaidtab {
-    my (@parts) = @_;
-    require raid;
-    #- faking a raidtab, it seems to be working :-)))
-    #- (choosing any inactive md)
-    raid::inactivate_all();
-    foreach (@parts) {
-	my ($nb) = grep { !raid::is_active("md$_") } 0..7;
-	output("/etc/raidtab", "raiddev /dev/md$nb\n  device " . devices::make($_->{device}) . "\n");
-	run_program::run('raidstart', devices::make("md$nb"));
-    }
-}
-
-sub raidAutoStart {
-    my (@parts) = @_;
-
-    log::l("raidAutoStart");
-    eval { modules::load('md') };
-    my %personalities = ( '1' => 'linear', '2' => 'raid0', '3' => 'raid1', '4' => 'raid5' );
-    raidAutoStartIoctl() or raidAutoStartRaidtab(@parts);
-    if (my @needed_perso = map { 
-	if_(/^kmod: failed.*md-personality-(.)/ ||
-	    /^md: personality (.) is not loaded/, $personalities{$1}) } syslog()) {
-	eval { modules::load(@needed_perso) };
-	raidAutoStartIoctl() or raidAutoStartRaidtab(@parts);
-    }
-}
-
-sub is_a_recent_computer {
-    my ($frequence) = map { /cpu MHz\s*:\s*(.*)/ } cat_("/proc/cpuinfo");
-    $frequence > 600;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
-
diff --git a/perl-install/devices.pm b/perl-install/devices.pm
deleted file mode 100644
index 260793e30..000000000
--- a/perl-install/devices.pm
+++ /dev/null
@@ -1,185 +0,0 @@
-package devices; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use run_program;
-use log;
-use c;
-
-sub size($) {
-    local *F;
-    sysopen F, $_[0], 0 or log::l("open $_[0]: $!"), return 0;
-
-    my $valid_offset = sub { sysseek(F, $_[0], 0) && sysread(F, my $a, 1) };
-
-    #- first try getting the size nicely
-    if (my $size = c::total_sectors(fileno F)) {
-	return $size * $common::SECTORSIZE;
-    }
-
-    #- sad it didn't work, well searching the size using the dichotomy algorithm!
-    my $low = 0;
-    my ($high, $mid);
-
-    #- first find n where 2^n < size <= 2^n+1
-    for ($high = 1; $high > 0 && &$valid_offset($high); $high *= 2) { $low = $high; }
-
-    while ($low < $high - 1) {
-	$mid = int ($low + $high) / 2;
-	&$valid_offset($mid) ? $low : $high = $mid;
-    }
-    $low + 1;
-}
-
-sub del_loop {
-    my ($dev) = @_;
-    run_program::run("losetup", "-d", $dev);
-}
-sub find_free_loop {
-    foreach (0..7) {
-	my $dev = make("loop$_");
-	local *F;
-	sysopen F, $dev, 2 or next;
-	!ioctl(F, c::LOOP_GET_STATUS(), my $tmp) && $! == 6 or next; #- 6 == ENXIO
-	close F;
-	return $dev;
-    }
-    die "no free loop found";
-}
-sub set_loop {
-    my ($file, $encrypt_key, $encryption) = @_;
-    my $dev = find_free_loop();
-
-    if ($encrypt_key && $encryption) {
-	my $cmd = "losetup -p 0 -e $encryption $dev $file";
-	log::l("calling $cmd");
-	local *F;
-	open F, "|$cmd";
-	print F $encrypt_key;
-	close F or die "losetup failed";
-    } else {
-	run_program::run("losetup", $dev, $file) or return;
-    }
-    $dev;
-}
-
-sub entry {
-    my ($type, $major, $minor);
-    local ($_) = @_;
-
-    if (/^0x([\da-f]{3,4})$/i) {
-	$type = c::S_IFBLK();
-	($major, $minor) = unmakedev(hex $1);
-    } elsif (/^sd(.)(\d{0,2})/) {
-	$type = c::S_IFBLK();
-	$major = 8;
-	$minor = 16 * (ord($1) - ord('a')) + ($2 || 0);
-    } elsif (/^hd(.)(\d{0,2})/) {
-	$type = c::S_IFBLK();
-	($major, $minor) =
-	    @{ $ {{'a' => [3, 0], 'b' => [3, 64],
-		   'c' => [22,0], 'd' => [22,64],
-		   'e' => [33,0], 'f' => [33,64],
-		   'g' => [34,0], 'h' => [34,64],
-		   'i' => [56,0], 'j' => [56,64],
-		   'k' => [57,0], 'l' => [57,64],
-                   'm' => [88,0], 'n' => [88,64],
-                   'o' => [89,0], 'p' => [89,64],
-                   'q' => [90,0], 'r' => [90,64],
-                   's' => [91,0], 't' => [91,64],
-	       }}{$1} or die "unknown device $_" };
-	$minor += $2 || 0;
-    } elsif (/^ram(.*)/) {
-	$type = c::S_IFBLK();
-	$major = 1;
-	$minor = $1 eq '' ? 1 : $1;
-    } elsif (m|^rd/c(\d+)d(\d+)(p(\d+))?|) {
-	# dac 960 "rd/cXdXXpX"
-        $type = c::S_IFBLK();
-	$major = 48 + $1;
-	$minor = 8 * $2 + $4;
-    } elsif (m,(ida|cciss)/c(\d+)d(\d+)(?:p(\d+))?,) {
-	# Compaq Smart Array "ida/c0d0{p1}"
-	$type = c::S_IFBLK();
-	$major = ($1 eq 'ida' ? 72 : 104) + $2;
-	$minor = 16 * $3 + ($4 || 0);
-    } elsif (m,(ataraid)/d(\d+)(?:p(\d+))?,) {
-	# ATA raid "ataraid/d0{p1}"
-	$type = c::S_IFBLK();
-	$major = 114;
-	$minor = 16 * $1 + ($2 || 0);
-    } elsif (/(.*?)(\d+)$/) {
-	    ($type, $major, $minor) =
-	     @{ ${{"fd"          => [ c::S_IFBLK(), 2,  0 ],
-		   "hidbp-mse-"  => [ c::S_IFCHR(), 10, 32 ],
-		   "lp"          => [ c::S_IFCHR(), 6,  0 ],
-		   "usb/lp"      => [ c::S_IFCHR(), 180, 0 ],
-		   "input/event" => [ c::S_IFCHR(), 13, 64 ],
-		   "loop"        => [ c::S_IFBLK(), 7,  0 ],
-		   "md"          => [ c::S_IFBLK(), 9,  0 ],
-		   "nst"         => [ c::S_IFCHR(), 9, 128],
-		   "scd"         => [ c::S_IFBLK(), 11, 0 ],
-		   "ttyS"        => [ c::S_IFCHR(), 4, 64 ],
-	       }}{$1}};
-	    $minor += $2;
-    }
-    unless ($type) {
-	($type, $major, $minor) =
-	     @{ ${{"aztcd"   => [ c::S_IFBLK(), 29, 0 ],
-		   "bpcd"    => [ c::S_IFBLK(), 41, 0 ],
-		   "cdu31a"  => [ c::S_IFBLK(), 15, 0 ],
-		   "cdu535"  => [ c::S_IFBLK(), 24, 0 ],
-		   "cm206cd" => [ c::S_IFBLK(), 32, 0 ],
-		   "gscd"    => [ c::S_IFBLK(), 16, 0 ],
-		   "mcd"     => [ c::S_IFBLK(), 23, 0 ],
-		   "mcdx"    => [ c::S_IFBLK(), 20, 0 ],
-		   "mem"     => [ c::S_IFCHR(), 1,  1 ],
-		   "optcd"   => [ c::S_IFBLK(), 17, 0 ],
-		   "kbd"     => [ c::S_IFCHR(), 11, 0 ],
-		   "psaux"   => [ c::S_IFCHR(), 10, 1 ],
-		   "atibm"   => [ c::S_IFCHR(), 10, 3 ],
-		   "random"  => [ c::S_IFCHR(), 1,  8 ],
-		   "sbpcd"   => [ c::S_IFBLK(), 25, 0 ],
-		   "sjcd"    => [ c::S_IFBLK(), 18, 0 ],
-		   "tty"     => [ c::S_IFCHR(),  5, 0 ],
-		   "usbmouse"=> [ c::S_IFCHR(), 13, 63], #- aka /dev/input/mice
-		   "adbmouse"=> [ c::S_IFCHR(), 10, 10], #- PPC
-		   "zero"    => [ c::S_IFCHR(), 1,  5 ],		     
-	       }}{$_} or die "unknown device $_ (caller is " . join(":", caller()) . ")" };
-    }
-    ($type, $major, $minor);
-}
-
-
-sub make($) {
-    local $_ = my $file = $_[0];
-
-    if (m,^(.*/(?:dev|tmp))/(.*),) {
-	$_ = $2;
-    } else {
-	$file =~ m|^/| && -e $file or $file = "/tmp/$_";
-	$file =~ m|^/| && -e $file or $file = "/dev/$_";
-    }
-    -e $file and return $file; #- assume nobody takes fun at creating files named as device
-
-    my ($type, $major, $minor) = eval { entry($_) };
-    $@ and die "unknown device $_ (caller is " . join(":", caller()) . ")";
-
-    if ($file =~ m|/dev/| && -e '/dev/.devfsd') {
-	#- argh, creating devices is no good with devfs...
-	#- return the file even if the device file doesn't exist
-	#- the caller will fail or not, better compatibility than raising an exception here
-	return $file;
-    }
-
-    #- make a directory for this inode if needed.
-    mkdir dirname($file), 0755;
-
-    syscall_('mknod', $file, $type | 0600, makedev($major, $minor)) or die "mknod failed (dev $_): $!";
-
-    $file;
-}
-
-1;
diff --git a/perl-install/diskdrake/diskdrake.html b/perl-install/diskdrake/diskdrake.html
deleted file mode 100644
index 7e85c3cde..000000000
--- a/perl-install/diskdrake/diskdrake.html
+++ /dev/null
@@ -1,139 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML//EN">
-<html>
-  <head>
-    <title>DiskDrake</title>
-  </head>
-  <body bgcolor="#ffffff">
-
-<center>
-<table width=80% border=0 cellpadding=10 cellspacing=10>
-<tr>
-<td bgcolor=#ffffff>
-
-    <p>
-    <img src="images/diskdrake1-def.jpg" alt="diskdrake logo" width=400 height=100>
-    <p>  
-
-    <H2>I- What's it?</H2>
-
-      The purpose of the DiskDrake project is to make easier the hard disk
-      partitionning. It is graphical, simple and powerful. The license is
-      the GPL (General Public License).
-      <BR>
-      Different skill levels will be available (newbie, advanced user, expert).
-      <BR>
-      It's written entirely in Perl and Perl/Gtk. It uses resize_fat which is
-      a perl rewrite of the work of Andrew Clausen (libresize).
-      <P>
-      DiskDrake is a project from MandrakeSoft, the company behind the popular
-      <a href="http://www.linux-mandrake.com">Linux-Mandrake</a>
-      operating-system.
-      <P>
-      A <A href="http://www.eatel.net/~john/diskdrake/faq.html">FAQ</A> is in construction.
-
-    <H2>II - What's available now</H2>
-
-    DiskDrake should be usable now...
-
-    it can:
-    <UL>
-	<LI> create partitions
-	<LI> delete partitions
-	<LI> change type of partition
-	<LI> format partitions
-	<LI> assign a mount point (<IMG SRC="/images/updated.gif" ALT="updated"><SMALL>(21/07/99)</SMALL> propose a list
-	of classic mount points and verify the mount point is valid)
-	<LI> mount partitions
-	<LI> resize fat partitions
-	<LI> resize partitions (when not caring loosing its data)
-	<LI> clear partition table
-	<LI> auto allocation (usefull for install)
-	<LI> write fstab
-    </UL>
-
-with nice contextual menu (shortcuts available, but dangerous as all actions are
-available, whereas with the contextual menu these actions are hidden. This will
-change)
-
-    <P><IMG SRC="/images/updated.gif" ALT="updated"><SMALL>(25/07/99)</SMALL> 
-    A new Expert button appear now. It toggles between
-    expert and normal mode. Some changes in information displayed:
-    <UL>
-       <LI> when you click (or focus) the drive tab (eg: hda), you get
-       information about your drive: size, geometry
-       (cylinders/sectors/heads number), type (eg: IBM DDRS-39130D), and bus/id.
-       In normal mode you have only the size.
-       <LI> the windows drive letter (eg: C: D: ...)
-       <LI> the `start sector' information from normal mode, it still appears in
-       expert mode
-       <LI> the start&end cylinder of each partition is now displayed in expert
-       mode
-       <LI> the type is displayed numerically in expert mode
-    </UL>
-
-    <P><IMG SRC="/images/updated.gif" ALT="updated"><SMALL>(25/07/99)</SMALL>
-    The mount point in the `Create' window and `Change type' window is now a
-    combo box. It lets you choose between classical mount points (/ /usr /var
-    ...) but with already allocated mount points removed.
-
-    <H2>III - Actual developpment</H2>
-
-    We need people!!!
-
-    <UL>
-      <LI><B>Tests</B> and remove bugs (no known yet :)
-      <LI>integrate ext2resize (which has been release in version 1.0.0 <IMG
-      SRC="/images/updated.gif" ALT="updated"><SMALL>(26/07/99)</SMALL>)
-      <LI>add possibility to move partition without loosing data (by copying all
-      data) <IMG SRC="/images/updated.gif" ALT="updated">
-      <LI>Improve the look
-      <LI>Add a text-only version
-      <LI>Help text, tutorial...
-      <LI>Internationalization
-      <LI>Add some features...
-      <LI>Packaging (rpm, deb, slp...)
-    </UL>
-	
-    <H2>IV- ScreenShot</H2>
-
-    Warning: features was the main focus, so don't be too hard :)
-
-    <P>
-      <CENTER><IMG SRC="1.gif"></IMG></CENTER>
-      <CENTER>DiskDrake main interface</CENTER>      
-      
-      <BR>
-      <CENTER><IMG SRC="3.gif"></IMG></CENTER>
-      <CENTER>create dialog box</CENTER>      
-      
-    <H2>V - Contacts</H2>
-    
-    A Mailing List has been created to allow developpers to discuss about DiskDrake.<BR>
-
-    <P>
-    Send a mail to: <A HREF="mailto:sympa@linux-mandrake.com">sympa@linux-mandrake.com</A>
-
-    <BR>Put in the subject: subscribe diskdrake
-    <BR>When you're subscribed, send your messages to: <A HREF="mailto:diskdrake@linux-mandrake.com">diskdrake@linux-mandrake.com</A>
-
-    <P>Otherwise you can contact directly the <A HREF="mailto:pixel@linux-mandrake.com">project leader</A>.
-
-    <H2>VI - Download</H2>
-    
-    Warning: You must have <a href="http://www.perl.com/CPAN/modules/by-module/Gtk/Gtk-Perl-0.5121.tar.gz">Gtk-Perl</a>.
-    You can get the rpm from the <a href="http://linux-mandrake.com/cooker/">Cooker</a> distribution.
-   
-    <P>You also need perl version 5.00503 or better
-
-    <P> Here you can find the plain tgz or a rpm:
-    <a href="ftp://ftp.phys.ttu.edu/pub/mandrake-devel/contrib/others/diskdrake/">diskdrake</a> (Other mirrors in <a href="http://linux-mandrake.com/cooker/">Cooker</a>)
-
-</td>
-</tr>
-</table>
-<p>
-<a href="/en/fpowerpack.php3"><img src="/images/mandrake6.0-loop.gif" width=468 height=60 alt="Mandrake 6.0 PowerPack"></a>
-</center>    
-  </body>
-  <address><a href="mailto:pixel@linux-mandrake.com"></a></address>
-</html>
diff --git a/perl-install/diskdrake/hd_gtk.pm b/perl-install/diskdrake/hd_gtk.pm
deleted file mode 100644
index fb741e499..000000000
--- a/perl-install/diskdrake/hd_gtk.pm
+++ /dev/null
@@ -1,379 +0,0 @@
-package diskdrake::hd_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::main;
-use my_gtk qw(:helpers :wrappers :ask);
-use partition_table qw(:types);
-use partition_table_raw;
-use detect_devices;
-use diskdrake::interactive;
-use run_program;
-use loopback;
-use devices;
-use raid;
-use any;
-use log;
-use fsedit;
-use fs;
-
-my ($width, $height, $minwidth) = (400, 50, 5);
-my ($all_hds, $in, $current_kind, $current_entry, $update_all);
-my ($w, @notebook, $done_button);
-
-=begin
-
-struct {
-  string name      # which is displayed in tab of the notebook
-  bool no_auto     # wether the kind can disappear after creation
-  string type      # one of { 'hd', 'raid', 'lvm', 'loopback', 'removable', 'nfs', 'smb' }
-  hd | hd_lvm | part_raid[] | part_loopback[] | raw_hd[]  val
-
-  # 
-  widget main_box
-  widget display_box
-  widget action_box
-  widget info_box
-} current_kind
-
-part current_entry
-
-notebook current_kind[]
-
-=cut
-
-sub main {
-    ($in, $all_hds, my $nowizard) = @_;
-
-    @notebook = ();
-
-    local $in->{grab} = 1;
-
-    $w = my_gtk->new('DiskDrake');
-    my $rc = "/usr/share/libDrakX/diskdrake.rc";
-    -r $rc or $rc = dirname(__FILE__) . "/../diskdrake.rc";
-    -r $rc or $rc = dirname(__FILE__) . "/../share/diskdrake.rc";
-    Gtk::Rc->parse($rc);
-
-    # TODO
-#    is_empty_array_ref($all_hds->{raids}) or raid::stopAll;
-#    updateLoopback();
-
-    gtkadd($w->{window},
-	   gtkpack_(new Gtk::VBox(0,7),
-		    0, (my $filesystems_button_box = filesystems_button_box()),
-		    1, (my $notebook_widget = new Gtk::Notebook),
-		    0, (my $per_kind_action_box = new Gtk::HBox(0,0)),
-		    0, (my $general_action_box  = new Gtk::HBox(0,0)),
-		   ),
-	  );
-    my $lock;
-    $update_all = sub {
-	$lock and return;
-	$lock = 1;
-	partition_table::assign_device_numbers($_) foreach fsedit::all_hds($all_hds);
-	create_automatic_notebooks($notebook_widget);
-	general_action_box($general_action_box, $nowizard);
-	per_kind_action_box($per_kind_action_box, $current_kind);
-	current_kind_changed($in, $current_kind);
-	current_entry_changed($current_kind, $current_entry);
-	$lock = 0;
-    };
-    create_automatic_notebooks($notebook_widget);
-
-    $notebook_widget->signal_connect('switch_page' => sub {
-	$current_kind = $notebook[$_[2]];
-	$current_entry = '';
-	$update_all->();
-    });
-    $w->sync;
-    $done_button->grab_focus;
-    $my_gtk::pop_it = 1;
-    $in->ask_okcancel(_("Read carefully!"), _("Please make a backup of your data first"), 1) or return
-      if $::isStandalone;
-    $in->ask_warn('', 
-_("If you plan to use aboot, be carefull to leave a free space (2048 sectors is enough)
-at the beginning of the disk")) if (arch() eq 'alpha') and !$::isEmbedded;
-
-    $w->main;
-}
-
-sub try {
-    my ($name, @args) = @_;
-    my $f = $diskdrake::interactive::{$name} or die "unknown function $name";
-    try_($name, \&{$f}, @args);
-}
-sub try_ {
-    my ($name, $f, @args) = @_;
-
-    fsedit::undo_prepare($all_hds) if $name ne 'Undo';
-
-    my $v = eval { $f->($in, @args, $all_hds) };
-    if (my $err = $@) {
-	$err =~ /setstep/ and die '';
-    	$in->ask_warn(_("Error"), formatError($err));
-    }
-
-    $current_entry = '' if !diskdrake::interactive::is_part_existing($current_entry, $all_hds);
-    $update_all->();
-
-    if ($v && member($name, 'Done', 'Wizard')) {
-	$::isEmbedded ? kill( 'USR1', $::CCPID) : Gtk->main_quit; 
-    }
-}
-
-################################################################################
-# generic: helpers
-################################################################################
-sub add_kind2notebook {
-    my ($notebook_widget, $kind) = @_;
-    die if $kind->{main_box};
-
-    $kind->{display_box} = gtkset_usize(new Gtk::HBox(0,0), $width, $height);
-    $kind->{action_box} = gtkset_usize(new Gtk::VBox(0,0), 150, 180);
-    $kind->{info_box} = new Gtk::VBox(0,0);
-    $kind->{main_box} =
-      gtkpack_(new Gtk::VBox(0,7),
-	       0, $kind->{display_box},
-	       1, gtkpack_(new Gtk::HBox(0,7),
-			   0, $kind->{action_box},
-			   1, $kind->{info_box}));
-    my_gtk::add2notebook($notebook_widget, $kind->{name}, $kind->{main_box});
-    push @notebook, $kind;
-    $kind;
-}
-
-sub general_action_box {
-    my ($box, $nowizard) = @_;
-    $_->widget->destroy foreach $box->children;
-    my @actions = (if_($::isInstall && !$nowizard, __("Wizard")), 
-		   diskdrake::interactive::general_possible_actions($in, $all_hds), 
-		   __("Done"));
-    foreach my $s (@actions) {
-	my $button = new Gtk::Button(translate($s));
-	$done_button = $button if $s eq 'Done';
-	gtkadd($box, gtksignal_connect($button, clicked => sub { try($s) }));
-    }
-}
-sub per_kind_action_box {
-    my ($box, $kind) = @_;
-    $_->widget->destroy foreach $box->children;
-    foreach my $s (diskdrake::interactive::hd_possible_actions($in, kind2hd($kind), $all_hds)) {
-	gtkadd($box, 
-	       gtksignal_connect(new Gtk::Button(translate($s)),
-				 clicked => sub { try($s, kind2hd($kind)) }));
-    }
-}
-sub per_entry_action_box {
-    my ($box, $kind, $entry) = @_;
-    $_->widget->destroy foreach $box->children;
-
-    if ($entry) {
-	my @buttons = map { 
-	    my $s = $_;
-	    my $w = new Gtk::Button(translate($s));
-	    $w->signal_connect(clicked => sub { try($s, kind2hd($kind), $entry) });
-	    $w;
-	} diskdrake::interactive::part_possible_actions($in, kind2hd($kind), $entry, $all_hds);
-
-	gtkadd($box, gtkadd(new Gtk::Frame(_("Choose action")),
-			    createScrolledWindow(gtkpack__(new Gtk::VBox(0,0), @buttons)))) if @buttons;
-    } else {
-	my $txt = !$::isStandalone && fsedit::is_one_big_fat($all_hds->{hds}) ?
-_("You have one big FAT partition
-(generally used by MicroSoft Dos/Windows).
-I suggest you first resize that partition
-(click on it, then click on \"Resize\")") : _("Please click on a partition");
-	gtkpack($box, gtktext_insert(new Gtk::Text, $txt));
-    }
-}
-
-sub per_entry_info_box {
-    my ($box, $kind, $entry) = @_;
-    $_->widget->destroy foreach $box->children;
-    my $info;
-    if ($entry) {
-	$info = diskdrake::interactive::format_part_info(kind2hd($kind), $entry);
-    } elsif ($kind->{type} =~ /hd|lvm/) {
-	$info = diskdrake::interactive::format_hd_info($kind->{val});
-    }
-    gtkpack($box, gtkadd(new Gtk::Frame(_("Details")), gtkset_justify(new Gtk::Label($info), 'left')));
-}
-
-sub current_kind_changed {
-    my ($in, $kind) = @_;
-
-    $_->widget->destroy foreach $kind->{display_box}->children;
-
-    my $v = $kind->{val};
-    my @parts = 
-      $kind->{type} eq 'raid' ? grep {$_} @$v :
-      $kind->{type} eq 'loopback' ? @$v : fsedit::get_fstab_and_holes($v);
-    my $totalsectors = 
-      $kind->{type} =~ /raid|loopback/ ? sum(map { $_->{size} } @parts) : $v->{totalsectors};
-    create_buttons4partitions($kind, $totalsectors, @parts);
-}
-
-sub current_entry_changed {
-    my ($kind, $entry) = @_;
-    $current_entry = $entry;
-    if ($kind) {
-	per_entry_action_box($kind->{action_box}, $kind, $entry);
-	per_entry_info_box($kind->{info_box}, $kind, $entry);
-    }
-}
-
-sub create_automatic_notebooks {
-    my ($notebook_widget) = @_;
-    my @l = fsedit::all_hds($all_hds);
-
-    $_->{marked} = 0 foreach @notebook;
-    my $may_add = sub {
-	my ($kind) = @_;
-	my @l = grep { $kind->{val} == $_->{val} } @notebook;
-	@l > 1 and log::l("weird: create_automatic_notebooks");
-	$kind = $l[0] || add_kind2notebook($notebook_widget, $kind);
-	$kind->{marked} = 1;
-    };
-    $may_add->(hd2kind($_)) foreach @{$all_hds->{hds}};
-    $may_add->(lvm2kind($_)) foreach @{$all_hds->{lvms}};
-    $may_add->(raid2kind()) if grep {$_} @{$all_hds->{raids}};
-    $may_add->(loopback2kind()) if @{$all_hds->{loopbacks}};
-
-    @notebook = grep_index {
-	my $b = $_->{marked} or $notebook_widget->remove_page($::i);
-	$b;
-    } @notebook;
-    @notebook or die '';
-}
-
-################################################################################
-# parts: helpers
-################################################################################
-sub create_buttons4partitions {
-    my ($kind, $totalsectors, @parts) = @_;
-
-    $width = max($width, 0.9 * second($w->{window}->window->get_size)) if $w->{window}->window;
-
-    my $ratio = $totalsectors ? ($width - @parts * $minwidth) / $totalsectors : 1;
-    while (1) {
-	my $totalwidth = sum(map { $_->{size} * $ratio + $minwidth } @parts);
-	$totalwidth <= $width and last;
-	$ratio /= $totalwidth / $width * 1.1;
-    }
-
-    foreach my $entry (@parts) {
-	my $w = new Gtk::Button($entry->{mntpoint} || '') or die '';
-	$w->signal_connect(focus_in_event     => sub { current_entry_changed($kind, $entry) });
-	$w->signal_connect(button_press_event => sub { current_entry_changed($kind, $entry) });
-	$w->signal_connect(key_press_event => sub {
-	    my ($w, $e) = @_;
-	    $e->{state} & 4 or return; 
-	    my $c = chr $e->{keyval};
-
-	    foreach my $s (diskdrake::interactive::part_possible_actions($in, kind2hd($kind), $entry, $all_hds)) {
-		${{
-		    Create => 'c', Delete => 'd', Format => 'f', 
-		    Loopback => 'l', Resize => 'r', Type => 't', 
-		    Mount => 'M', Unmount => 'u', 'Mount point' => 'm',
-		    'Add to LVM' => 'L', 'Remove from LVM' => 'L', 
-		    'Add to RAID' => 'R', 'Remove from RAID' => 'R',
-		}}{$s} eq $c or next;
-
-		try($s, kind2hd($kind), $entry);
-		last;
-	    }
-	});
-	$w->set_name("PART_" . type2name($entry->{type}));
-	$w->set_usize($entry->{size} * $ratio + $minwidth, 0);
-	gtkpack__($kind->{display_box}, $w);
-	$w->grab_focus if $current_entry && fsedit::is_same_part($current_entry, $entry);
-    }
-}
-
-
-################################################################################
-# disks: helpers
-################################################################################
-sub current_hd { 
-    $current_kind->{type} eq 'hd' or die 'current_hd called but $current_kind is not an hd';
-    $current_kind->{val};
-}
-sub current_part {
-    current_hd();
-    $current_entry;
-}
-
-sub kind2hd {
-    my ($kind) = @_;
-    $kind->{type} =~ /hd|lvm/ ? $kind->{val} : {}
-}
-
-sub hd2kind {
-    my ($hd) = @_;
-    { type => 'hd', name => $hd->{device}, val => $hd };
-}
-
-sub filesystems_button_box() {
-    my @types = (__("Ext2"), __("Journalised FS"), __("Swap"), arch() =~ /sparc/ ? __("SunOS") : arch() eq "ppc" ? __("HFS") : __("FAT"),
-		 __("Other"), __("Empty"));
-    my %name2type = (Ext2 => 0x83, 'Journalised FS' => 0x483, Swap => 0x82, Other => 1, FAT => 0xb, HFS => 0x402);
-
-    gtkpack(new Gtk::HBox(0,0), 
-	    _("Filesystem types:"),
-	    map { my $w = new Gtk::Button(translate($_));
-		  my $t = $name2type{$_};
-		  $w->signal_connect(clicked => sub { try_('', \&createOrChangeType, $t, current_hd(), current_part()) });
-		  $w->can_focus(0);
-		  $w->set_name($_); 
-		  $w;
-	    } @types);
-}
-
-sub createOrChangeType {
-    my ($in, $type, $hd, $part, $all_hds) = @_;
-
-    $part ||= !fsedit::get_fstab($hd) && 
-              { type => 0, start => 1, size => $hd->{totalsectors} - 1 };
-    $part or return;
-    if ($type == 1) {
-	$in->ask_warn('', _("Use ``%s'' instead", $part->{type} ? _("Type") : _("Create")));
-    } elsif (!$type) {
-	$in->ask_warn('', _("Use ``%s'' instead", _("Delete"))) if $part->{type};
-    } elsif ($part->{type}) {
-	return unless $::expert;
-	return if $type == $part->{type};
-	isBusy($part) and $in->ask_warn('', _("Use ``Unmount'' first")), return;
-	diskdrake::interactive::ask_alldatawillbelost($in, $part, __("After changing type of partition %s, all data on this partition will be lost")) or return;
-	diskdrake::interactive::check_type($in, $type, $hd, $part) and fsedit::change_type($type, $hd, $part);
-    } else {
-	$part->{type} = $type;
-	diskdrake::interactive::Create($in, $hd, $part, $all_hds);
-    }
-}
-
-################################################################################
-# lvms: helpers
-################################################################################
-sub lvm2kind {
-    my ($lvm) = @_;
-    { type => 'lvm', name => $lvm->{LVMname}, val => $lvm };
-}
-
-################################################################################
-# raids: helpers
-################################################################################
-sub raid2kind {
-    { type => 'raid', name => 'raid', val => $all_hds->{raids} };
-}
-
-################################################################################
-# loopbacks: helpers
-################################################################################
-sub loopback2kind {
-    { type => 'loopback', name => 'loopback', val => $all_hds->{loopbacks} };
-}
-
-1;
diff --git a/perl-install/diskdrake/interactive.pm b/perl-install/diskdrake/interactive.pm
deleted file mode 100644
index b86c32839..000000000
--- a/perl-install/diskdrake/interactive.pm
+++ /dev/null
@@ -1,1162 +0,0 @@
-package diskdrake::interactive; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use detect_devices;
-use run_program;
-use loopback;
-use devices;
-use fsedit;
-use raid;
-use any;
-use log;
-use fs;
-
-
-=begin
-
-struct part {
-  int active            # one of { 0 | 0x80 }  x86 only, primary only
-  int start             # in sectors
-  int size              # in sectors
-  int type              # 0x82, 0x83, 0x6 ...
-  string device         # 'hda5', 'sdc1' ...
-  string rootDevice     # 'sda', 'hdc' ...
-  string real_mntpoint  # directly on real /, '/tmp/hdimage' ...
-  string mntpoint       # '/', '/usr' ...
-  string options        # 'defaults', 'noauto'
-  string device_windobe # 'C', 'D' ...
-  string encrypt_key    # [0-9A-Za-z./]{20,}
-  string comment        # comment to have in fstab
-
-  bool isMounted
-
-  bool isFormatted
-  bool notFormatted 
-    #  isFormatted                  means the device is formatted
-    # !isFormatted &&  notFormatted means the device is not formatted
-    # !isFormatted && !notFormatted means we don't know which state we're in
-
-  int raid          # for partitions of type isRawRAID and which isPartOfRAID, the raid device number
-  string lvm        # partition used as a PV for the VG with {lvm} as LVMname
-  loopback loopback[]   # loopback living on this partition
-
-  # internal
-  string real_device     # '/dev/loop0', '/dev/loop1' ...
-
-  # internal CHS (Cylinder/Head/Sector)
-  int start_cyl, start_head, start_sec, end_cyl, end_head, end_sec, 
-}
-
-struct part_allocate inherits part {
-  int maxsize        # in sectors (alike "size")
-  int ratio          # 
-  string hd          # 'hda', 'hdc'
-  string parts       # for creating raid partitions. eg: 'foo bar' where 'foo' and 'bar' are mntpoint
-}
-
-struct part_raid inherits part {
-  string chunk-size  # usually '64k'
-  string level       # one of { 0, 1, 4, 5, 'linear' }
-
-  part disks[]
-
-  # invalid: active, start, rootDevice, device_windobe?, CHS
-}
-
-struct part_loopback inherits part {
-  string loopback_file   # absolute file name which is relative to the partition
-  part loopback_device   # where the loopback file live
-
-  # device is special here: it is the absolute filename of the loopback file.
-
-  # invalid: active, start, rootDevice, device_windobe, CHS
-}
-
-struct part_lvm inherits part {
-  # invalid: active, start, device_windobe, CHS
-}
-
-
-struct partition_table_elem {
-  part normal[]     #
-  part extended     # the main/next extended
-  part raw[4]       # primary partitions
-}
-
-struct geom {
-  int heads 
-  int sectors
-  int cylinders
-  int totalcylinders # for SUN, forget it
-  int start          # always 0, forget it
-}
-
-struct hd {
-  int totalsectors      # size in sectors
-  string device         # 'hda', 'sdc' ...
-  string device_alias   # 'cdrom', 'floppy' ...
-  string media_type     # one of { 'hd', 'cdrom', 'fd', 'tape' }
-  string capacity       # contain of the strings of { 'burner', 'DVD' }
-  string info           # name of the hd, eg: 'QUANTUM ATLAS IV 9 WLS'
-
-  bool isDirty          # does it need to be written to the disk 
-  bool needKernelReread # must we tell the kernel to reread the partition table
-  bool hasBeenDirty     # for undo
-  bool rebootNeeded     # happens when a kernel reread failed
-  bool partitionsRenumbered # happens when you
-                            # - remove an extended partition which is not the last one
-                            # - add an extended partition which is the first extended partition
-  int bus, id
-  
-  partition_table_elem primary
-  partition_table_elem extended[]
-
-  geom geom
-
-  # internal
-  string prefix         # for some RAID arrays device=>c0d0 and prefix=>c0d0p
-  string file           # '/dev/hda' ...
-}
-
-struct hd_lvm inherits hd {
-  int PE_size           # block size (granularity, similar to cylinder size on x86)
-  string LVMname        # VG name
-
-  part_lvm disks[]
-
-  # invalid: bus, id, extended, geom
-}
-
-struct raw_hd inherits hd {
-  string type       # 0x82, 0x83, 'nfs', ...
-  string mntpoint   # '/', '/usr' ...
-  string options    # 'defaults', 'noauto'
-
-  # invalid: isDirty, needKernelReread, hasBeenDirty, rebootNeeded, primary, extended
-}
-
-struct all_hds {
-  hd hds[]
-  hd_lvm lvms[]
-  part_raid raids[]     # indexed by number: raids[$n]{device} is "md$n"
-  part_loopback loopbacks[]
-  raw_hd raw_hds[]
-  raw_hd nfss[]
-  raw_hd smbs[]
-  raw_hd special[]
-
-  # internal: if fstab_to_string($all_hds) eq current_fstab then no need to save
-  string current_fstab
-}
-
-
-=cut
-
-
-sub main {
-    my ($in, $all_hds) = @_;
-
-    if ($in->isa('interactive_gtk')) {
-	require diskdrake::hd_gtk;
-	goto &diskdrake::hd_gtk::main;
-    }
-
-    my ($current_part, $current_hd);
-    
-    while (1) {
-	my $choose_txt = $current_part ? __("Choose another partition") : __("Choose a partition");
-	my $parts_and_holes = [ fsedit::get_all_fstab_and_holes($all_hds) ];
-	my $choose_part = sub {
-	    $current_part = $in->ask_from_listf('diskdrake', translate($choose_txt), sub { format_part_info_short(fsedit::part2hd($_[0], $all_hds), $_[0]) }, $parts_and_holes, $current_part) || return;
-	    $current_hd = fsedit::part2hd($current_part, $all_hds);
-	};
-
-	$choose_part->() if !$current_part;
-	return if !$current_part;
-
-	my %actions = my @actions = (
-            if_($current_part, 
-          (map { my $s = $_; $_ => sub { $diskdrake::interactive::{$s}($in, $current_hd, $current_part, $all_hds) } } part_possible_actions($in, $current_hd, $current_part, $all_hds)),
-		'____________________________' => sub {},
-            ),
-            if_(@$parts_and_holes > 1, $choose_txt => $choose_part),
-	    if_($current_hd,
-	  (map { my $s = $_; $_ => sub { $diskdrake::interactive::{$s}($in, $current_hd, $all_hds) } } hd_possible_actions_interactive($in, $current_hd, $all_hds)),
-	    ), 
-	  (map { my $s = $_; $_ => sub { $diskdrake::interactive::{$s}($in, $all_hds) } } general_possible_actions($in, $all_hds)),
-        );
-	my ($actions) = list2kv(@actions);
-	my $a;
-	if ($current_part) {
-	    $in->ask_from_({
-			    cancel => _("Exit"), 
-			    title => 'diskdrake',
-			    messages => format_part_info($current_hd, $current_part),
-			   },
-			   [ { val => \$a, list => $actions, format => \&translate, type => 'list', sort => 0, gtk => { use_boxradio => 0 } } ]) or last;
-	    $actions{$a}();
-	    $current_hd = $current_part = '' if !is_part_existing($current_part, $all_hds);	    
-	} else {
-	    $choose_part->();
-	}
-	partition_table::assign_device_numbers($_) foreach fsedit::all_hds($all_hds);
-    }
-    Done($in, $all_hds) or goto &main;
-}
-
-
-
-
-################################################################################
-# general actions
-################################################################################
-sub general_possible_actions {
-    __("Undo"), ($::expert ? __("Toggle to normal mode") : __("Toggle to expert mode"));
-}
-
-
-sub Undo {
-    my ($in, $all_hds) = @_;
-    fsedit::undo($all_hds);
-}
-
-sub Wizard {
-    $::o->{wizard} = 1;
-    goto &Done;
-}
-
-sub Done {
-    my ($in, $all_hds) = @_;
-    eval { raid::verify($all_hds->{raids}) };
-    if (my $err = $@) {
-	$::expert or die;
-	$in->ask_okcancel('', [ formatError($err), _("Continue anyway?")]) or return;
-    }
-    foreach (@{$all_hds->{hds}}) {
-	if (!write_partitions($in, $_)) {
-	    return if !$::isStandalone;
-	    $in->ask_yesorno(_("Quit without saving"), _("Quit without writing the partition table?"), 1) or return;
-	}
-    }
-    if (!$::isInstall) {
-	my $new = fs::fstab_to_string($all_hds);
-	if ($new ne $all_hds->{current_fstab} && $in->ask_yesorno('', _("Do you want to save /etc/fstab modifications"), 1)) {
-	    $all_hds->{current_fstab} = $new;
-	    fs::write_fstab($all_hds);
-	}
-    }
-    1;
-}
-
-################################################################################
-# per-hd actions
-################################################################################
-sub hd_possible_actions {
-    __("Clear all"), if_($::isInstall, __("Auto allocate")), __("More");
-}
-sub hd_possible_actions_interactive {
-    hd_possible_actions(), __("Hard drive information");
-}
-
-sub Clear_all {
-    my ($in, $hd, $all_hds) = @_;
-    isPartOfLVM($_) and RemoveFromLVM($in, $hd, $_, $all_hds) foreach partition_table::get_normal_parts($hd);
-    partition_table_raw::zero_MBR_and_dirty($hd);
-}
-
-sub Auto_allocate {
-    my ($in, $hd, $all_hds) = @_;
-    my $suggestions = partitions_suggestions($in) or return;
-
-    my %all_hds_ = %$all_hds;
-    $all_hds_{hds} = [ sort { $a == $hd ? -1 : 1 } @{$all_hds->{hds}} ];
-
-    eval { fsedit::auto_allocate(\%all_hds_, $suggestions) };
-    if ($@) {
-	$@ =~ /partition table already full/ or die;
-
-	$in->ask_warn("", [ 
-			   _("All primary partitions are used"),
-			   _("I can't add any more partition"), 
-			   _("To have more partitions, please delete one to be able to create an extended partition"),
-			  ]);
-    }
-}
-
-sub More {
-    my ($in, $hd) = @_;
-
-    $in->ask_from('', '',
-	    [
-	     { val => _("Save partition table"),    clicked_may_quit => sub { SaveInFile($in, $hd);   1 } },
-	     { val => _("Restore partition table"), clicked_may_quit => sub { ReadFromFile($in, $hd); 1 } },
-	     { val => _("Rescue partition table"),  clicked_may_quit => sub { Rescuept($in, $hd);     1 } },
-	         if_($::isInstall, 
-	     { val => _("Reload partition table"), clicked => sub { 
-		   $::o->{all_hds} = fsedit::empty_all_hds();
-		   die "setstep doPartitionDisks\n" if $::setstep;
-	       } }),
-	         if_($::isInstall, 
-	     { text => _("Removable media automounting"), val => \$::o->{useSupermount}, type => 'bool' },
-		 ),
-	    ],
-    );
-}
-
-sub ReadFromFile {
-    my ($in, $hd) = @_;
-
-    my $file = $::isStandalone ? $in->ask_file(_("Select file")) : devices::make("fd0") or return;
-
-    eval {
-    catch_cdie { partition_table::load($hd, $file) }
-      sub {
-	  $@ =~ /bad totalsectors/ or return;
-	  $in->ask_yesorno('',
-_("The backup partition table has not the same size
-Still continue?"), 0);
-      };
-    };
-    if (my $err = $@) {
-    	$in->ask_warn(_("Error"), formatError($err));
-    }
-}
-
-sub SaveInFile {
-    my ($in, $hd) = @_;
-
-    my $file = $::isStandalone ?
-		 $in->ask_file(_("Select file")) :
-                 $in->ask_okcancel(_("Warning"),
-_("Insert a floppy in drive
-All data on this floppy will be lost"), 1) && devices::make(detect_devices::floppy()) or return;
-
-    eval { partition_table::save($hd, $file) };
-    if (my $err = $@) {
-    	$in->ask_warn(_("Error"), formatError($err));
-    }
-}
-
-sub Rescuept {
-    my ($in, $hd) = @_;
-    my $w = $in->wait_message('', _("Trying to rescue partition table"));
-    fsedit::rescuept($hd);
-}
-
-sub Hd_info {
-    my ($in, $hd) = @_;
-    $in->ask_warn('', [ _("Detailed information"), format_hd_info($hd) ]);
-}
-
-################################################################################
-# per-part actions
-################################################################################
-
-sub part_possible_actions {
-    my ($in, $hd, $part, $all_hds) = @_;
-    $part or return;
-
-    my %actions = my @l = (
-        __("Mount point")      => '($part->{real_mntpoint} && common::usingRamdisk()) || (!isBusy && !isSwap && !isNonMountable)',
-        __("Type")             => '!isBusy && $::expert',
-        __("Options")          => '$::expert',
-        __("Resize")	       => '!isBusy && !isSpecial || isLVM($hd) && isMounted && isThisFs("xfs", $part)',
-        __("Move")             => '!isBusy && !isSpecial && $::expert && 0', # disable for the moment
-        __("Format")           => '!isBusy && ($::expert || $::isStandalone)',
-        __("Mount")            => '!isBusy && (hasMntpoint || isSwap) && maybeFormatted && ($::expert || $::isStandalone)',
-        __("Add to RAID")      => '!isBusy && isRawRAID && !isSpecial',
-        __("Add to LVM")       => '!isBusy && isRawLVM',
-        __("Unmount")          => '!$part->{real_mntpoint} && isMounted',
-        __("Delete")	       => '!isBusy',
-        __("Remove from RAID") => 'isPartOfRAID',
-        __("Remove from LVM")  => 'isPartOfLVM',
-        __("Modify RAID")      => 'isPartOfRAID && !isMounted($all_hds->{raids}[$part->{raid}])',
-        __("Use for loopback") => '!$part->{real_mntpoint} && isMountableRW && !isSpecial && hasMntpoint && $::expert',
-    );
-    my ($actions_names) = list2kv(@l);
-    my %macros = (
-        hasMntpoint => '$part->{mntpoint}',
-        isPrimary => 'isPrimary($part, $hd)',
-    );
-    if ($part->{type} == 0) {
-	__("Create");
-    } else {
-        grep { 
-    	    my $cond = $actions{$_};
-    	    while (my ($k, $v) = each %macros) {
-    	        $cond =~ s/$k/qq(($v))/e;
-    	    }
-    	    $cond =~ s/(^|[^:\$]) \b ([a-z]\w{3,}) \b ($|[\s&\)])/$1 . $2 . '($part)' . $3/exg;
-    	    eval $cond;
-        } @$actions_names;
-    }
-}
-
-sub Create {
-    my ($in, $hd, $part, $all_hds) = @_;
-    my ($def_start, $def_size, $max) = ($part->{start}, $part->{size}, $part->{start} + $part->{size});
-
-    $part->{maxsize} = $part->{size}; $part->{size} = 0;
-    if (!fsedit::suggest_part($part, $all_hds)) {
-	$part->{size} = $part->{maxsize};
-	$part->{type} ||= 0x483;
-    }
-
-    #- update adjustment for start and size, take into account the minimum partition size
-    #- including one less sector for start due to a capacity to increase the adjustement by
-    #- one.
-    my ($primaryOrExtended, $migrate_files);
-    my $type = type2name($part->{type});
-    my $mb_size = $part->{size} >> 11;
-    my $has_startsector = ($::expert || arch() !~ /i.86/) && !isLVM($hd);
-
-    my $w = $in->ask_from(_("Create a new partition"), '',
-        [
-           if_($has_startsector,
-         { label => _("Start sector: "), val => \$part->{start}, min => $def_start, max => ($max - min_partition_size($hd)), type => 'range' },
-           ),
-         { label => _("Size in MB: "), val => \$mb_size, min => min_partition_size($hd) >> 11, max => $def_size >> 11, type => 'range' },
-         { label => _("Filesystem type: "), val => \$type, list => [ partition_table::important_types() ], sort => 0 },
-         { label => _("Mount point: "), val => \$part->{mntpoint}, list => [ fsedit::suggestions_mntpoint($all_hds), '' ],
-           disabled => sub { my $p = { type => name2type($type) }; isSwap($p) || isNonMountable($p) }, type => 'combo', not_edit => 0,
-         },
-           if_($::expert && $hd->hasExtended,
-         { label => _("Preference: "), val => \$primaryOrExtended, list => [ '', "Extended", "Primary", if_($::expert, "Extended_0x85") ] },
-           ),
-        ], changed => sub {
-	    if ($part->{start} + ($mb_size << 11) > $max) {
-		if ($_[0] == 0) {
-		    # Start sector changed => restricting Size
-		    $mb_size = ($max - $part->{start}) >> 11; 
-		} else {
-		    # Size changed => restricting Start sector
-		    $part->{start} = $max - ($mb_size << 11); 
-		}
-	    }
-        }, complete => sub {
-	    $part->{size} = from_Mb($mb_size, min_partition_size($hd), $max - $part->{start}); #- need this to be able to get back the approximation of using MB
-	    $part->{type} = name2type($type);
-	    $part->{mntpoint} = '' if isNonMountable($part);
-	    $part->{mntpoint} = 'swap' if isSwap($part);
-	    fs::set_default_options($part);
-
-	    check($in, $hd, $part, $all_hds) or return 1;
-	    $migrate_files = need_migration($in, $part->{mntpoint}) or return 1;
-
-	    fsedit::add($hd, $part, $all_hds, { force => 1, primaryOrExtended => $primaryOrExtended });
-	    0;
-	},
-    ) or return;
-
-    warn_if_renumbered($in, $hd);
-
-    if ($migrate_files eq 'migrate') {
-	format_($in, $hd, $part, $all_hds) or return;
-	migrate_files($in, $hd, $part);
-	fs::mount_part($part);
-    }
-}
-
-sub Delete {
-    my ($in, $hd, $part, $all_hds) = @_;
-    if (isRAID($part)) {
-	raid::delete($all_hds->{raids}, $part);
-    } elsif (isLVM($hd)) {
-	lvm::lv_delete($hd, $part);
-    } elsif (isLoopback($part)) {
-	my $f = "$part->{loopback_device}{mntpoint}$part->{loopback_file}";
-	if (-e $f && $in->ask_yesorno('', _("Remove the loopback file?"))) {
-	    unlink $f;
-	}
-	my $l = $part->{loopback_device}{loopback};
-	@$l = grep { $_ != $part } @$l;
-	delete $part->{loopback_device}{loopback} if @$l == 0;
-	fsedit::recompute_loopbacks($all_hds);
-    } else {
-	if (arch() =~ /ppc/) {
-	    undef $partition_table_mac::bootstrap_part if (isAppleBootstrap($part) && ($part->{device} = $partition_table_mac::bootstrap_part));
-	}
-	partition_table::remove($hd, $part);
-	warn_if_renumbered($in, $hd);
-    }
-}
-
-sub Type {
-    my ($in, $hd, $part) = @_;
-
-    my $warn = sub { ask_alldatawillbelost($in, $part, __("After changing type of partition %s, all data on this partition will be lost")) };
-
-    #- for ext2, warn after choosing as ext2->ext3 can be achieved without loosing any data :)
-    isExt2($part) or $warn->() or return;
-
-    my $type_name = type2name($part->{type});
-    $in->ask_from(_("Change partition type"),
-		  _("Which filesystem do you want?"),
-		  [ { label => _("Type"), val => \$type_name, list => [ partition_table::important_types() ], sort => 0, not_edit => !$::expert } ]) or return;
-
-    my $type = $type_name && name2type($type_name);
-
-    if (isExt2($part) && isThisFs('ext3', { type => $type })) {
-	my $w = $in->wait_message('', _("Switching from ext2 to ext3"));
-	if (run_program::run("tune2fs", "-j", devices::make($part->{device}))) {
-	    $part->{type} = $type;
-	    $part->{isFormatted} = 1; #- assume that if tune2fs works, partition is formatted
-
-	    #- disable the fsck (don't do it together with -j in case -j fails?)
-	    fs::disable_forced_fsck($part->{device});	    
-	    return;
-	}
-    }
-    #- either we switch to non-ext3 or switching losslessly to ext3 failed
-    !isExt2($part) or $warn->() or return;
-
-    if (defined $type) {
-	check_type($in, $type, $hd, $part) and fsedit::change_type($type, $hd, $part);
-    }
-}
-
-sub Mount_point {
-    my ($in, $hd, $part, $all_hds) = @_;
-
-    my $migrate_files;
-    my $mntpoint = $part->{mntpoint} || do {
-	my $part_ = { %$part };
-	if (fsedit::suggest_part($part_, $all_hds)) {
-	    fsedit::has_mntpoint('/', $all_hds) || $part_->{mntpoint} eq '/boot' ? $part_->{mntpoint} : '/';
-	} else { '' }
-    };
-    $in->ask_from(
-        '',
-        isLoopback($part) ? _("Where do you want to mount loopback file %s?", $part->{loopback_file}) :
-			    _("Where do you want to mount device %s?", $part->{device}),
-	[ { label => _("Mount point"), val => \$mntpoint, 
-	    list => [ if_($mntpoint, $mntpoint), fsedit::suggestions_mntpoint($all_hds), '' ], 
-	    not_edit => !$::expert } ],
-	complete => sub {
-	    !isPartOfLoopback($part) || $mntpoint or $in->ask_warn('', 
-_("Can't unset mount point as this partition is used for loop back.
-Remove the loopback first")), return 1;
-	    $part->{mntpoint} eq $mntpoint || check_mntpoint($in, $mntpoint, $hd, $part, $all_hds) or return 1;
-    	    $migrate_files = need_migration($in, $mntpoint) or return 1;
-	    0;
-	}
-    ) or return;
-    $part->{mntpoint} = $mntpoint;
-
-    if ($migrate_files eq 'migrate') {
-	format_($in, $hd, $part, $all_hds) or return;
-	migrate_files($in, $hd, $part);
-	fs::mount_part($part);
-    }
-}
-sub Mount_point_raw_hd {
-    my ($in, $part, $all_hds, $propositions) = @_;
-
-    my $mntpoint = $part->{mntpoint};
-    $in->ask_from(
-        '',
-        _("Where do you want to mount device %s?", $part->{device}),
-	[ { label => _("Mount point"), val => \$mntpoint, 
-	    list => [ if_($mntpoint, $mntpoint), '', @$propositions ], 
-	    not_edit => 0 } ],
-	complete => sub {
-	    $part->{mntpoint} eq $mntpoint || check_mntpoint($in, $mntpoint, {}, $part, $all_hds) or return 1;
-	    0;
-	}
-    ) or return;
-    $part->{mntpoint} = $mntpoint;
-}
-
-sub Resize {
-    my ($in, $hd, $part) = @_;
-    my (%nice_resize, $block_count, $free_block, $block_size);
-    my ($min, $max) = (min_partition_size($hd), partition_table::next_start($hd, $part) - $part->{start});
-
-    if (maybeFormatted($part)) {
-	# here we may have a non-formatted or a formatted partition
-	# -> doing as if it was formatted
-
-	if (isFat($part)) {
-	    write_partitions($in, $hd) or return;
-	    #- try to resize without losing data
-	    my $w = $in->wait_message(_("Resizing"), _("Computing FAT filesystem bounds"));
-
-	    $nice_resize{fat} = resize_fat::main->new($part->{device}, devices::make($part->{device}));
-	    $min = max($min, $nice_resize{fat}->min_size);
-	    $max = min($max, $nice_resize{fat}->max_size);	    
-	} elsif (isExt2($part) || isThisFs('ext3', $part)) {
-	    write_partitions($in, $hd) or return;
-	    $nice_resize{ext2} = devices::make($part->{device});
-	    my $r = `dumpe2fs $nice_resize{ext2} 2>/dev/null`;
-	    $r =~ /Block count:\s*(\d+)/ and $block_count = $1;
-	    $r =~ /Free blocks:\s*(\d+)/ and $free_block = $1;
-	    $r =~ /Block size:\s*(\d+)/ and $block_size = $1;
-	    log::l("dumpe2fs $nice_resize{ext2} gives: Block_count=$block_count, Free_blocks=$free_block, Block_size=$block_size");
-	    if ($block_count && $free_block && $block_size) {
-		$min = max($min, ($block_count - $free_block) * $block_size / 512);
-		$max = min($max, $block_count * $block_size / 512);
-	    } else {
-		delete $nice_resize{ext2};
-	    }
-	} elsif (isThisFs("reiserfs", $part)) {
-	    write_partitions($in, $hd) or return;
-	    if (defined (my $free = fs::df($part))) {
-		$nice_resize{reiserfs} = 1;		  
-		$min = max($min, $free);
-	    }
-	} elsif (isThisFs('xfs', $part) && isLVM($hd) && $::isStandalone && isMounted($part)) {
-	    $min = $part->{size}; #- ensure the user can only increase
-	    $nice_resize{xfs} = 1;
-	}
-	#- make sure that even after normalizing the size to cylinder boundaries, the minimun will be saved,
-	#- this save at least a cylinder (less than 8Mb).
-	$min += partition_table_raw::cylinder_size($hd);
-	$min >= $max and return $in->ask_warn('', _("This partition is not resizeable"));
-
-	#- for these, we have tools to resize partition table
-	#- without losing data (or at least we hope so :-)
-	if (%nice_resize) {
-	    ask_alldatamaybelost($in, $part, __("All data on this partition should be backed-up")) or return;
-	} else {
-	    ask_alldatawillbelost($in, $part, __("After resizing partition %s, all data on this partition will be lost")) or return;
-	}
-    }
-
-    my $mb_size = $part->{size} >> 11;
-    $in->ask_from(_("Resize"), _("Choose the new size"), [ 
-		   { label => _("New size in MB: "), val => \$mb_size, min => $min >> 11, max => $max >> 11, type => 'range' },
-		]) or return;
-
-
-    my $size = from_Mb($mb_size, $min, $max);
-    $part->{size} == $size and return;
-
-    my $oldsize = $part->{size};
-    $hd->{isDirty} = $hd->{needKernelReread} = 1;
-    $part->{size} = $size;
-    $hd->adjustEnd($part);
-
-    undef $@;
-    my $b = before_leaving { $@ and $part->{size} = $oldsize };
-    my $w = $in->wait_message(_("Resizing"), '');
-
-    if (isLVM($hd)) {
-	lvm::lv_resize($part, $oldsize) if $size > $oldsize;	
-    }
-
-    if ($nice_resize{fat}) {
-	local *log::l = sub { $w->set(join(' ', @_)) };
-	$nice_resize{fat}->resize($part->{size});
-    } elsif ($nice_resize{ext2}) {
-	my $s = int(($part->{size} << 9) / $block_size);
-	log::l("resize2fs $nice_resize{ext2} to size $s in block of $block_size bytes");
-	system "resize2fs", "-pf", $nice_resize{ext2}, $s;
-    } elsif ($nice_resize{reiserfs}) {
-	log::l("reiser resize to $part->{size} sectors");
-	install_any::check_prog ("resize_reiserfs") if $::isInstall;
-	system "resize_reiserfs", "-f", "-q", "-s" . $part->{size}/2 . "K", devices::make($part->{device});
-    } elsif ($nice_resize{xfs}) {
-	system "xfs_growfs", $part->{mntpoint};
-    }
-
-    if (%nice_resize) {
-	$part->{isFormatted} = 1;
-    } else {
-	$part->{notFormatted} = 1;
-	$part->{isFormatted} = 0;
-	partition_table::verifyParts($hd);
-    }
-
-    if (isLVM($hd)) {
-	lvm::lv_resize($part, $oldsize) if $size < $oldsize;
-    } else {
-	partition_table::adjust_local_extended($hd, $part);
-	partition_table::adjust_main_extended($hd);
-    }
-}
-sub Move {
-    my ($in, $hd, $part, $all_hds) = @_;
-    my $hd2 = $in->ask_from_listf(_("Move"),
-				  _("Which disk do you want to move it to?"), \&partition_table::description, @{$all_hds->{hds}}) or return;
-    my $start2 = $in->ask_from_entry(_("Sector"),
-				     _("Which sector do you want to move it to?"));
-    defined $start2 or return;
-
-    my $w = $in->wait_message(_("Moving"), _("Moving partition..."));
-    fsedit::move($hd, $part, $hd2, $start2);
-}
-sub Format {
-    my ($in, $hd, $part, $all_hds) = @_;
-    format_($in, $hd, $part, $all_hds);
-}
-sub Mount {
-    my ($in, $hd, $part) = @_;
-    write_partitions($in, $hd) or return;
-    fs::mount_part($part);
-}
-sub Add2RAID {
-    my ($in, $hd, $part, $all_hds) = @_;
-    my $raids = $all_hds->{raids};
-
-    local $_ = @$raids == () ? "new" :
-      $in->ask_from_list_('', _("Choose an existing RAID to add to"),
-			  [ (grep {$_} map_index { $_ && "md$::i" } @$raids), __("new") ]) or return;
-
-    if (/new/) {
-	my $nb1 = raid::new($raids, $part);
-	defined modifyRAID($in, $raids, $nb1) or return raid::delete($raids, $nb1);
-    } else {
-	raid::add($raids, $part, $_);
-    }
-    raid::update(@$raids);
-}
-sub Add2LVM {
-    my ($in, $hd, $part, $all_hds) = @_;
-    my $lvms = $all_hds->{lvms};
-    write_partitions($in, $_) or return foreach isRAID($part) ? @{$all_hds->{hds}} : $hd;
-
-    my $lvm = $in->ask_from_listf_('', _("Choose an existing LVM to add to"),
-				  sub { ref $_[0] ? $_[0]{LVMname} : $_[0] },
-				  [ @$lvms, __("new") ]) or return;
-    if (!ref $lvm) {
-	# create new lvm
-	my $name = $in->ask_from_entry('', _("LVM name?")) or return;
-	$name =~ s/\W/_/g;
-	$name = substr($name, 0, 63); # max length must be < NAME_LEN / 2  where NAME_LEN is 128
-	$lvm = bless { disks => [], LVMname => $name }, 'lvm';
-	push @$lvms, $lvm;
-    }
-    $part->{lvm} = $lvm->{LVMname};
-    push @{$lvm->{disks}}, $part;
-    delete $part->{mntpoint};
-
-    require lvm;
-    lvm::check($in) if $::isStandalone;
-    lvm::vg_add($part);
-    lvm::update_size($lvm);
-}
-sub Unmount {
-    my ($in, $hd, $part) = @_;
-    fs::umount_part($part);
-}
-sub RemoveFromRAID { 
-    my ($in, $hd, $part, $all_hds) = @_;
-    raid::removeDisk($all_hds->{raids}, $part);
-}
-sub RemoveFromLVM {
-    my ($in, $hd, $part, $all_hds) = @_;
-    my $lvms = $all_hds->{lvms};
-    isPartOfLVM($part) or die;
-    my ($lvm) = grep { $_->{LVMname} eq $part->{lvm} } @$lvms;
-    lvm::vg_destroy($lvm);
-    @$lvms = grep { $_ != $lvm } @$lvms;
-}
-sub ModifyRAID { 
-    my ($in, $hd, $part, $all_hds) = @_;
-    modifyRAID($in, $all_hds->{raids}, $part->{raid});
-}
-sub Loopback {
-    my ($in, $hd, $real_part, $all_hds) = @_;
-
-    write_partitions($in, $hd) or return;
-
-    my $handle = any::inspect($real_part) or $in->ask_warn('', _("This partition can't be used for loopback")), return;
-
-    my ($min, $max) = (1, loopback::getFree($handle->{dir}, $real_part)); 
-    my $part = { maxsize => $max, size => 0, loopback_device => $real_part, notFormatted => 1 };
-    if (!fsedit::suggest_part($part, $all_hds)) {
-	$part->{size} = $part->{maxsize};
-	$part->{type} ||= 0x483;
-    }
-    delete $part->{mntpoint}; # we don't want the suggested mntpoint
-
-    my $type = type2name($part->{type});
-    my $mb_size = $part->{size} >> 11;
-    $in->ask_from(_("Loopback"), '', [
-		  { label => _("Loopback file name: "), val => \$part->{loopback_file} },
-		  { label => _("Size in MB: "), val => \$mb_size, min => $min >> 11, max => $max >> 11, type => 'range' },
-		  { label => _("Filesystem type: "), val => \$type, list => [ partition_table::important_types() ], not_edit => !$::expert, sort => 0 },
-             ],
-	     complete => sub {
-		 $part->{loopback_file} or $in->ask_warn('', _("Give a file name")), return 1, 0;
-		 $part->{loopback_file} =~ s|^([^/])|/$1|;
-		 if (my $size = loopback::verifFile($handle->{dir}, $part->{loopback_file}, $real_part)) {
-		     $size == -1 and $in->ask_warn('', _("File already used by another loopback, choose another one")), return 1, 0;
-		     $in->ask_yesorno('', _("File already exists. Use it?")) or return 1, 0;
-		     delete $part->{notFormatted};
-		     $part->{size} = divide($size, 512);
-		 } else {
-		     $part->{size} = from_Mb($mb_size, $min, $max);
-		 }
-		 0;
-	     }) or return;
-    $part->{type} = name2type($type);
-    push @{$real_part->{loopback}}, $part;
-    fsedit::recompute_loopbacks($all_hds);
-}
-
-sub Options {
-    my ($in, $hd, $part, $all_hds) = @_;
-
-    my @simple_options = qw(user noauto supermount);
-
-    my (undef, $user_implies) = fs::mount_options();
-    my ($options, $unknown) = fs::mount_options_unpack($part);
-    my %help = fs::mount_options_help(keys %$options);
-
-    my $prev_user = $options->{user};
-    $in->ask_from(_("Mount options"),
-		  '',
-		  [ 
-		   (map {; 
-			 { label => $_, text => scalar warp_text(formatAlaTeX($help{$_})), val => \$options->{$_}, 
-			   advanced => !$part->{rootDevice} && !member($_, @simple_options), if_(!/=$/, type => 'bool'), }
-		     } keys %$options),
-		    { label => _("Various"), val => \$unknown, advanced => 1 },
-		  ],
-		  changed => sub {
-		      if ($prev_user != $options->{user}) {
-			  $prev_user = $options->{user};
-			  $options->{$_} = $options->{user} foreach @$user_implies;
-		      }
-		      if ($options->{encrypted}) {
-			  # modify $part->{options} for the check
-			  local $part->{options};
-			  fs::mount_options_pack($part, $options, $unknown);
-			  if (!check($in, $hd, $part, $all_hds)) {
-			      $options->{encrypted} = 0;
-			  } elsif (!$part->{encrypt_key} && !isSwap($part)) {
-			      if (my $encrypt_key = choose_encrypt_key($in)) {
-				  $options->{'encryption='} = 'AES128';
-				  $part->{encrypt_key} = $encrypt_key;
-			      } else {
-				  $options->{encrypted} = 0;
-			      }
-			  }
-		      } else {
-			  delete $options->{'encryption='};
-			  delete $part->{encrypt_key};
-		      }
-		  },
-		 ) or return;
-
-    fs::mount_options_pack($part, $options, $unknown);
-}
-
-
-{ 
-    no strict; 
-    *{"Toggle to normal mode"} = sub { $::expert = 0 };
-    *{"Toggle to expert mode"} = sub { $::expert = 1 };
-    *{"Clear all"} = *Clear_all;
-    *{"Auto allocate"} = *Auto_allocate;
-    *{"Mount point"} = *Mount_point;
-    *{"Modify RAID"} = *ModifyRAID;
-    *{"Add to RAID"} = *Add2RAID;
-    *{"Remove from RAID"} = *RemoveFromRAID; 
-    *{"Add to LVM"} = *Add2LVM;
-    *{"Remove from LVM"} = *RemoveFromLVM; 
-    *{"Use for loopback"} = *Loopback;
-    *{"Hard drive information"} = *Hd_info;
-}
-
-
-################################################################################
-# helpers
-################################################################################
-
-sub is_part_existing {
-    my ($part, $all_hds) = @_;
-    $part && grep { fsedit::is_same_part($part, $_) } fsedit::get_all_fstab_and_holes($all_hds);
-}
-
-sub modifyRAID {
-    my ($in, $raids, $nb) = @_;
-    my $md = "md$nb";
-    $in->ask_from('', '',
-		  [
-{ label => _("device"), val => \$md, list => [ map { "md$_" } grep { $nb == $_ || !$raids->[$_] } 0..8 ] },
-{ label => _("level"), val => \$raids->[$nb]{level}, list => [ qw(0 1 4 5 linear) ] },
-{ label => _("chunk size"), val => \$raids->[$nb]{'chunk-size'} },
-		  ],
-		 ) or return;
-    raid::updateSize($raids->[$nb]); # changing the raid level changes the size available
-    raid::changeNb($raids, $nb, first($md =~ /(\d+)/));
-}
-
-
-sub ask_alldatamaybelost {
-    my ($in, $part, $msg) = @_;
-
-    maybeFormatted($part) or return 1;
-
-    #- here we may have a non-formatted or a formatted partition
-    #- -> doing as if it was formatted
-    $in->ask_okcancel(_("Read carefully!"), [ _("Be careful: this operation is dangerous."), _($msg, $part->{device}) ], 1);
-}
-sub ask_alldatawillbelost {
-    my ($in, $part, $msg) = @_;
-
-    maybeFormatted($part) or return 1;
-
-    #- here we may have a non-formatted or a formatted partition
-    #- -> doing as if it was formatted
-    $in->ask_okcancel(_("Read carefully!"), _($msg, $part->{device}), 1);
-}
-
-sub partitions_suggestions {
-    my ($in) = @_;
-    my $t = $::expert ? 
-      $in->ask_from_list_('', _("What type of partitioning?"), [ keys %fsedit::suggestions ]) :
-      'simple';
-    $fsedit::suggestions{$t};
-}
-
-sub check_type {
-    my ($in, $type, $hd, $part) = @_;
-    eval { fsedit::check_type($type, $hd, $part) };
-    if (my $err = $@) {
-	$in->ask_warn('', $err);
-	return;
-    }
-    if ($::isStandalone) {
-	if (my $pkg = fsedit::package_needed_for_partition_type({ type => $type })) {
-	    my $fs = type2fs({ type => $type });
-	    if (!-x "/sbin/mkfs.$fs") {
-		$in->ask_yesorno('', _("The package %s is needed. Install it?", $pkg), 1) or return;
-		$in->do_pkgs->install($pkg);
-	    }
-	    -x "/sbin/mkfs.$fs" or $in->ask_warn('', "Mandatory package $pkg is missing"), return;
-	}
-    }
-    1;
-}
-sub check_mntpoint {
-    my ($in, $mntpoint, $hd, $part, $all_hds) = @_;
-    eval { fsedit::check_mntpoint($mntpoint, $hd, $part, $all_hds) };
-    local $_ = $@;
-    if (m|/boot ending on cylinder > 1024|) {
-	$in->ask_warn('',
-_("Sorry I won't accept to create /boot so far onto the drive (on a cylinder > 1024).
-Either you use LILO and it won't work, or you don't use LILO and you don't need /boot"));
-    } elsif (m|/ ending on cylinder > 1024|) {
-	$in->ask_warn('',
-_("The partition you've selected to add as root (/) is physically located beyond
-the 1024th cylinder of the hard drive, and you have no /boot partition.
-If you plan to use the LILO boot manager, be careful to add a /boot partition"));
-	undef $_;
-    } elsif (m|raid / with no /boot|) {
-	$in->ask_warn('',
-_("You've selected a software RAID partition as root (/).
-No bootloader is able to handle this without a /boot partition.
-So be careful to add a /boot partition"));
-	undef $_;
-    } elsif ($_) {
-	$in->ask_warn('', formatError($_));
-    }
-    !$_;
-}
-sub check {
-    my ($in, $hd, $part, $all_hds) = @_;
-    check_type($in, $part->{type}, $hd, $part) &&
-      check_mntpoint($in, $part->{mntpoint}, $hd, $part, $all_hds);
-}
-
-sub write_partitions {
-    my ($in, $hd) = @_;
-    $hd->{isDirty} or return 1;
-    isLVM($hd) and return 1;
-
-    $in->ask_okcancel(_("Read carefully!"), _("Partition table of drive %s is going to be written to disk!", $hd->{device}), 1) or return;
-    if (!$::testing) {
-	partition_table::write($hd);
-    }
-    $hd->{rebootNeeded} and die _("You'll need to reboot before the modification can take place");
-    1;
-}
-
-sub unmount {
-    my ($hd, $part) = @_;
-    fs::umount_part($part);
-}
-sub format_ {
-    my ($in, $hd, $part, $all_hds) = @_;
-    write_partitions($in, $_) or return foreach isRAID($part) ? @{$all_hds->{hds}} : $hd;
-    ask_alldatawillbelost($in, $part, __("After formatting partition %s, all data on this partition will be lost")) or return;
-    $part->{isFormatted} = 0; #- force format;
-    my $w = $in->wait_message(_("Formatting"), 
-			      isLoopback($part) ? _("Formatting loopback file %s", $part->{loopback_file}) :
-			                          _("Formatting partition %s", $part->{device}));
-    fs::format_part($all_hds->{raids}, $part);
-    1;
-}
-
-sub need_migration {
-    my ($in, $mntpoint) = @_;
-
-    my @l = grep { $_ ne "lost+found" } all($mntpoint);
-    if (@l && $::isStandalone) {
-	my $choice;
-	my @choices = (__("Move files to the new partition"), __("Hide files"));
-	$in->ask_from('', _("Directory %s already contains data\n(%s)", $mntpoint, formatList(5, @l)), 
-		      [ { val => \$choice, list => \@choices, type => 'list' } ]) or return;
-	$choice eq $choices[0] ? 'migrate' : 'hide';
-    } else {
-	'hide';
-    }    
-}
-
-sub migrate_files {
-    my ($in, $hd, $part, $all_hds) = @_;
-
-    my $wait = $in->wait_message('', _("Moving files to the new partition"));
-    my $handle = any::inspect($part, '', 'rw');
-    my @l = glob_("$part->{mntpoint}/*");
-    foreach (@l) {
-	$wait->set(_("Copying %s", $_)); 
-	system("cp", "-a", $_, $handle->{dir});
-    }
-    foreach (@l) {
-	$wait->set(_("Removing %s", $_)); 
-	system("rm", "-rf", $_);
-    }
-}
-
-sub warn_if_renumbered {
-    my ($in, $hd) = @_;
-    my $l = delete $hd->{partitionsRenumbered};
-    return if is_empty_array_ref($l);
-
-    my @l = map { _("partition %s is now known as %s", @$_) } @$l;
-    $in->ask_warn('', join("\n", 'Partitions have been renumbered: ', @l));
-}
-
-#- unit of $mb is mega bytes, min and max are in sectors, this
-#- function is used to convert back to sectors count the size of
-#- a partition ($mb) given from the interface (on Resize or Create).
-#- modified to take into account a true bounding with min and max.
-sub from_Mb {
-    my ($mb, $min, $max) = @_;
-    $mb <= $min >> 11 and return $min;
-    $mb >= $max >> 11 and return $max;
-    $mb * 2048;
-}
-
-sub format_part_info {
-    my ($hd, $part) = @_;
-
-    my $info = '';
-
-    $info .= _("Mount point: ") . "$part->{mntpoint}\n" if $part->{mntpoint};
-    $info .= _("Device: ") . "$part->{device}\n" if $part->{device} && !isLoopback($part);
-    $info .= _("DOS drive letter: %s (just a guess)\n", $part->{device_windobe}) if $part->{device_windobe};
-    if (arch() eq "ppc") {
-      my $new_value = $part->{pType};
-      $new_value =~ s/[^A-Za-z0-9_]//g;
-      $info .= _("Type: ") . $new_value . ($::expert ? sprintf " (0x%x)", $part->{type} : '') . "\n";
-      if (defined $part->{pName}) {
-      	$new_value = $part->{pName};
-      	$new_value =~ s/[^A-Za-z0-9_]//g;
-      	$info .= _("Name: ") . $new_value . "\n";
-      }
-    } elsif ($part->{type}) {
-	my $type = substr(type2name($part->{type}), 0, 40); # limit the length
-	$info .= _("Type: ") . $type . ($::expert ? sprintf " (0x%x)", $part->{type} : '') . "\n";
-    } else {
-	$info .= _("Empty") . "\n";
-    }
-    $info .= _("Start: sector %s\n", $part->{start}) if $::expert && !isSpecial($part);
-    $info .= _("Size: %s", formatXiB($part->{size}, 512));
-    $info .= sprintf " (%s%%)", int 100 * $part->{size} / $hd->{totalsectors} if $hd->{totalsectors};
-    $info .= _(", %s sectors", $part->{size}) if $::expert;
-    $info .= "\n";
-    $info .= _("Cylinder %d to %d\n", $part->{start} / $hd->cylinder_size(), ($part->{start} + $part->{size} - 1) / $hd->cylinder_size()) if ($::expert || !$part->{type}) && !isSpecial($part);
-    $info .= _("Formatted\n") if $part->{isFormatted};
-    $info .= _("Not formatted\n") if !$part->{isFormatted} && $part->{notFormatted};
-    $info .= _("Mounted\n") if $part->{isMounted};
-    $info .= _("RAID md%s\n", $part->{raid}) if isPartOfRAID($part);
-    $info .= sprintf "LVM %s\n", $part->{lvm} if isPartOfLVM($part);
-    $info .= _("Loopback file(s):\n   %s\n", join(", ", map { $_->{loopback_file} } @{$part->{loopback}})) if isPartOfLoopback($part);
-    $info .= _("Partition booted by default\n    (for MS-DOS boot, not for lilo)\n") if $part->{active} && $::expert;
-    if (isRAID($part)) {
-	$info .= _("Level %s\n", $part->{level});
-	$info .= _("Chunk size %s\n", $part->{'chunk-size'});
-	$info .= _("RAID-disks %s\n", join ", ", map { $_->{device} } @{$part->{disks}});
-    } elsif (isLoopback($part)) {
-	$info .= _("Loopback file name: %s", $part->{loopback_file});
-    }
-    if (isApple($part)) {
-	$info .= _("\nChances are, this partition is\na Driver partition, you should\nprobably leave it alone.\n");
-    }
-    if (isAppleBootstrap($part)) {
-	$info .= _("\nThis special Bootstrap\npartition is for\ndual-booting your system.\n");
-    }
-    # restrict the length of the lines
-    $info =~ s/(.{60}).*/$1.../mg;
-    $info;
-}
-
-sub format_part_info_short { 
-    my ($hd, $part) = @_;
-    $part->{type} ? 
-      partition_table::description($part) :
-      format_part_info($hd, $part);
-}
-
-sub format_hd_info {
-    my ($hd) = @_;
-
-    my $info = '';
-    $info .= _("Device: ") . "$hd->{device}\n";
-    $info .= _("Size: %s\n", formatXiB($hd->{totalsectors}, 512)) if $hd->{totalsectors};
-    $info .= _("Geometry: %s cylinders, %s heads, %s sectors\n", @{$hd->{geom}}{qw(cylinders heads sectors)}) if $::expert && $hd->{geom};
-    $info .= _("Info: ") . ($hd->{info} || $hd->{media_type}) . "\n" if $::expert && ($hd->{info} || $hd->{media_type});
-    $info .= _("LVM-disks %s\n", join ", ", map {$_->{device}} @{$hd->{disks}}) if isLVM($hd) && $hd->{disks};
-    $info .= _("Partition table type: %s\n", $1) if $::expert && ref($hd) =~ /_([^_]+)$/;
-    $info .= _("on bus %d id %d\n", $hd->{bus}, $hd->{id}) if $::expert && exists $hd->{bus};
-    $info;
-}
-
-sub format_raw_hd_info {
-    my ($raw_hd) = @_;
-
-    my $info = '';
-    $info .= _("Mount point: ") . "$raw_hd->{mntpoint}\n" if $raw_hd->{mntpoint};
-    $info .= format_hd_info($raw_hd);
-    if ($raw_hd->{type}) {
-	my $type = substr(type2name($raw_hd->{type}), 0, 40); # limit the length
-	$info .= _("Type: ") . $type . "\n";
-    }
-    $info .= _("Options: %s", $raw_hd->{options}) if $raw_hd->{options};
-    $info;
-}
-
-#- get the minimal size of partition in sectors to help diskdrake on
-#- limit cases, include a cylinder + start of a eventually following
-#- logical partition.
-sub min_partition_size { $_[0]->cylinder_size() + 2*$_[0]->{geom}{sectors} }
-
-
-sub choose_encrypt_key {
-    my ($in) = @_;
-
-    my ($encrypt_key, $encrypt_key2);
-    $in->ask_from_(
-		       {
-         title => _("Filesystem encryption key"), 
-	 messages => _("Choose your filesystem encryption key"),
-	 callbacks => { 
-	     complete => sub {
-		 length $encrypt_key < 20 and $in->ask_warn('', _("This encryption key is too simple (must be at least %d characters long)", 20)), return (1,0);
-		 $encrypt_key eq $encrypt_key2 or $in->ask_warn('', [ _("The encryption keys do not match"), _("Please try again") ]), return (1,1);
-		 return 0
-        } } }, [
-{ label => _("Encryption key"), val => \$encrypt_key,  hidden => 1 },
-{ label => _("Encryption key (again)"), val => \$encrypt_key2, hidden => 1 },
-    ]) && $encrypt_key;
-}
diff --git a/perl-install/diskdrake/removable.pm b/perl-install/diskdrake/removable.pm
deleted file mode 100644
index 58eb2b302..000000000
--- a/perl-install/diskdrake/removable.pm
+++ /dev/null
@@ -1,53 +0,0 @@
-package diskdrake::removable; # $Id$
-
-use diagnostics;
-use strict;
-use diskdrake::interactive;
-use common;
-use fsedit;
-use fs;
-
-sub main {
-    my ($in, $all_hds, $raw_hd) = @_;
-    my %actions = my @actions = actions();
-    my $action;
-    while ($action ne 'Done') {
-	$action = $in->ask_from_list_('', 
-					 diskdrake::interactive::format_raw_hd_info($raw_hd), 
-					 [ map { $_->[0] } group_by2 @actions ], 'Done') or return;
-	$actions{$action}->($in, $raw_hd, $all_hds);
-    }
-}
-
-sub actions {
-    (
-     __("Mount point") => \&mount_point,
-     __("Options") => \&options,
-     __("Type") => \&type,
-     __("Done") => \&done,
-    );
-}
-
-sub done {
-    my ($in, $raw_hd, $all_hds) = @_;
-    diskdrake::interactive::Done($in, $all_hds);
-}
-sub options {
-    my ($in, $raw_hd, $all_hds) = @_;
-    diskdrake::interactive::Options($in, {}, $raw_hd, $all_hds);
-}
-sub mount_point { 
-    my ($in, $raw_hd, $all_hds) = @_;
-    diskdrake::interactive::Mount_point_raw_hd($in, $raw_hd, $all_hds, [ "/mnt/$raw_hd->{device}" ] );
-}
-sub type {
-    my ($in, $raw_hd) = @_;
-    my @fs = ('auto', fs::auto_fs());
-    my $type = $raw_hd->{type};
-    $in->ask_from(_("Change type"),
-			      _("Which filesystem do you want?"),
-			      [ { label => _("Type"), val => \$type, list => [@fs], not_edit => !$::expert } ]) or return;
-    $raw_hd->{type} = $type;
-}
-
-1;
diff --git a/perl-install/diskdrake/removable_gtk.pm b/perl-install/diskdrake/removable_gtk.pm
deleted file mode 100644
index da897b67a..000000000
--- a/perl-install/diskdrake/removable_gtk.pm
+++ /dev/null
@@ -1,31 +0,0 @@
-package diskdrake::removable_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use my_gtk qw(:helpers :wrappers :ask);
-
-
-sub per_entry_action_box {
-    my ($box, $kind, $entry) = @_;
-    $_->widget->destroy foreach $box->children;
-
-    if ($entry) {
-	my @l = (
-		 _("Mount point") => \&raw_hd_mount_point,
-		 _("Options") => \&raw_hd_options,
-		 _("Type") => \&removable_type,
-		);
-	@buttons = map_each {
-	    my ($txt, $f) = @_;
-	    gtksignal_connect(new Gtk::Button($txt), clicked => sub { try_('', $f, $entry) });
-	} group_by2 @l;
-
-	gtkadd($box, gtkadd(new Gtk::Frame(_("Choose action")),
-			    createScrolledWindow(gtkpack__(new Gtk::VBox(0,0), @buttons)))) if @buttons;
-	    
-    } else {
-	my $txt = _("Please click on a medium");
-	gtkpack($box, gtktext_insert(new Gtk::Text, $txt));
-    }
-}
diff --git a/perl-install/diskdrake/smbnfs_gtk.pm b/perl-install/diskdrake/smbnfs_gtk.pm
deleted file mode 100644
index 545d925fd..000000000
--- a/perl-install/diskdrake/smbnfs_gtk.pm
+++ /dev/null
@@ -1,266 +0,0 @@
-package diskdrake::smbnfs_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use any;
-use fs;
-use diskdrake::interactive;
-use common;
-use interactive;
-use network::smb;
-use network::nfs;
-use my_gtk qw(:helpers :wrappers :ask);
-
-my ($all_hds, $in, $tree, $current_entry, $current_leaf, %icons);
-
-sub main {
-    ($in, $all_hds, my $type) = @_;
-    my ($kind) = $type eq 'smb' ? smb2kind() : nfs2kind();
-    {
-	local $my_gtk::pop_it = 1;
-	$kind->check($in) or return;
-    }
-
-    my $w = my_gtk->new('DiskDrake');
-
-    add_smbnfs($w->{window}, $kind);
-    $w->{rwindow}->set_default_size(400, 300) if $w->{rwindow}->can('set_default_size');
-    $w->{window}->show_all;
-    $w->main;
-}
-
-################################################################################
-# nfs/smb: helpers
-################################################################################
-sub try {
-    my ($kind, $name, @args) = @_;
-    my $f = $diskdrake::interactive::{$name} or die "unknown function $name";
-    try_($kind, $name, \&{$f}, @args);
-}
-sub try_ {
-    my ($kind, $name, $f, @args) = @_;
-    eval { $f->($in, @args, $all_hds); };
-    if (my $err = $@) {
-	$in->ask_warn(_("Error"), formatError($err));
-    }
-    update($kind);
-    Gtk->main_quit if member($name, 'Cancel', 'Done');
-}
-
-sub raw_hd_options {
-    my ($in, $raw_hd) = @_;
-    diskdrake::interactive::Options($in, {}, $raw_hd);
-}
-sub raw_hd_mount_point {
-    my ($in, $raw_hd) = @_;
-    my ($default) = $raw_hd->{device} =~ m|([^/]+)$|;
-    $default =~ s/\s+/-/g;
-    diskdrake::interactive::Mount_point_raw_hd($in, $raw_hd, $all_hds, [ "/mnt/$default" ]);
-}
-
-sub per_entry_info_box {
-    my ($box, $kind, $entry) = @_;
-    $_->isa('Gtk::Button') or $_->destroy foreach map { $_->widget } $box->children;
-    my $info;
-    if ($entry) {
-	$info = diskdrake::interactive::format_raw_hd_info($entry);
-    }
-    gtkpack($box, gtkadd(new Gtk::Frame(_("Details")), gtkset_justify(new Gtk::Label($info), 'left')));
-}
-
-sub per_entry_action_box {
-    my ($box, $kind, $entry) = @_;
-    $_->widget->destroy foreach $box->children;
-
-    my @buttons;
-
-    push @buttons, map {
-	  my $s = $_;
-	  gtksignal_connect(new Gtk::Button(translate($s)), clicked => sub { try($kind, $s, {}, $entry) });
-      } (if_($entry->{isMounted}, __("Unmount")),
-	 if_($entry->{mntpoint} && !$entry->{isMounted}, __("Mount"))) if $entry;
-
-    my @l = (
-	     if_($entry, __("Mount point") => \&raw_hd_mount_point),
-	     if_($entry && $entry->{mntpoint}, __("Options") => \&raw_hd_options),
-	     __("Cancel") => sub {},
-	     __("Done") => \&done,
-	    );
-    push @buttons, map {
-	my ($txt, $f) = @$_;
-	gtksignal_connect(new Gtk::Button(translate($txt)), clicked => sub { try_($kind, $txt, $f, $entry) });
-    } group_by2(@l);
-
-    gtkadd($box, gtkpack(new Gtk::HBox(0,0), @buttons));
-}
-
-sub done {
-    my ($in) = @_;
-    diskdrake::interactive::Done($in, $all_hds);
-}
-
-sub set_export_icon {
-    my ($entry, $w) = @_;
-    $entry ||= {};
-    my $icon = $icons{$entry->{isMounted} ? 'mounted' : $entry->{mntpoint} ? 'has_mntpoint' : 'default'};
-    my_gtk::ctree_set_icon($tree, $w, @$icon);
-}
-
-sub update {
-    my ($kind) = @_;
-    per_entry_action_box($kind->{action_box}, $kind, $current_entry);
-    per_entry_info_box($kind->{info_box}, $kind, $current_entry);
-    set_export_icon($current_entry, $current_leaf) if $current_entry;
-}
-
-sub find_fstab_entry {
-    my ($kind, $e, $add_or_not) = @_;
-
-    my $fs_entry = $kind->to_fstab_entry($e);
-
-    if (my ($fs_entry_) = grep { $fs_entry->{device} eq $_->{device} } @{$kind->{val}}) {
-	$fs_entry_;
-    } elsif ($add_or_not) {
-	push @{$kind->{val}}, $fs_entry;
-	$fs_entry;
-    } else {
-	undef;
-    }
-}
-
-sub import_ctree {
-    my ($kind, $info_box) = @_;
-    my (%servers_displayed, %wservers, %wexports, $inside);
-
-    $tree = Gtk::CTree->new(1, 0);
-    $tree->set_column_auto_resize(0, 1);
-    $tree->set_selection_mode('browse');
-    $tree->set_row_height($tree->style->font->ascent + $tree->style->font->descent + 1);
-
-    foreach ('default', 'server', 'has_mntpoint', 'mounted') {
-	$icons{$_} = [ gtkcreate_png("smbnfs_$_") ];
-    }
-
-    my $add_server = sub {
-	my ($server) = @_;
-	my $name = $server->{name} || $server->{ip};
-	$servers_displayed{$name} ||= do {
-	    my $w = $tree->insert_node(undef, undef, [$name], 5, (undef) x 4, 0, 0);
-	    my_gtk::ctree_set_icon($tree, $w, @{$icons{server}});
-	    $wservers{$w->{_gtk}} = $server;
-	    $w;
-	};
-    };
-
-    my $find_exports; $find_exports = sub {
-	my ($server) = @_;
-	my @l = eval { $kind->find_exports($server) };
-	return @l if !$@;
-
-	if ($server->{username}) {
-	    $in->ask_warn('', _("Can't login using username %s (bad password?)", $server->{username}));
-	    network::smb::remove_bad_credentials($server);
-	} else {
-	    if (my @l = network::smb::authentifications_available($server)) {
-		my $user = $in->ask_from_list_(_("Domain Authentication Required"),
-					       _("Which username"), [ @l, __("Another one") ]) or return;
-		if ($user ne 'Another one') {
-		    network::smb::read_credentials($server, $user);
-		    goto $find_exports;
-		}
-	    }
-	}
-
-	if ($in->ask_from(_("Domain Authentication Required"),
-		      _("Please enter your username, password and domain name to access this host."),
-		      [ 
-		       { label => _("Username"), val => \$server->{username} },
-		       { label => _("Password"), val => \$server->{password} },
-		       { label => _("Domain"), val => \$server->{domain} },
-		      ])) {
-	    goto $find_exports;
-	} else {
-	    delete $server->{username};
-	    ();
-	}	
-    };
-
-    my $add_exports = sub {
-	my ($node) = @_;
-	$tree->expand($node);
-	foreach ($find_exports->($wservers{$node->{_gtk}} || return)) { #- can't die here since insert_node provoque a tree_select_row before the %wservers is filled
-	    my $w = $tree->insert_node($node, undef, [$kind->to_string($_)], 5, (undef) x 4, 1, 0);
-	    set_export_icon(find_fstab_entry($kind, $_), $w);
-	    $wexports{$w->{_gtk}} = $_;
-	}
-    };
-
-    { 
-	my $search = new Gtk::Button(_("Search servers"));
-	gtkpack__($info_box, 
-		  gtksignal_connect($search,
-				    clicked => sub {
-					$add_server->($_) foreach sort { $a->{name} cmp $b->{name} } $kind->find_servers;
-					$search->destroy;
-				    }));
-    }
-
-    foreach (uniq(map { ($kind->from_dev($_->{device}))[0] } @{$kind->{val}})) {
-	my $node = $add_server->({ name => $_ });
-	$add_exports->($node);
-    }
-
-    $tree->signal_connect(tree_select_row => sub { 
-	my $curr = $_[1];
-	$inside and return;
-	$inside = 1;
-	if ($curr->row->is_leaf) {
-	    $current_leaf = $curr;
-	    $current_entry = find_fstab_entry($kind, $wexports{$curr->{_gtk}} || die(''), 'add');
-	} else {
-	    if (!$curr->row->children) {
-		gtkset_mousecursor_wait($tree->window);
-		my_gtk::flush();
-		$add_exports->($curr);		
-		gtkset_mousecursor_normal($tree->window);
-	    }
-	    $current_entry = undef;
-	}
-	update($kind);
-	$inside = 0;
-    });
-    $tree;
-}
-
-sub add_smbnfs {
-    my ($widget, $kind) = @_;
-    die if $kind->{main_box};
-
-    $kind->{info_box} = new Gtk::VBox(0,0);
-    $kind->{display_box} = createScrolledWindow(import_ctree($kind, $kind->{info_box}));
-    $kind->{action_box} = new Gtk::HBox(0,0);
-    $kind->{main_box} =
-      gtkpack_(new Gtk::VBox(0,7),
-	       1, gtkpack(new Gtk::HBox(0,7),
-			  gtkset_usize($kind->{display_box}, 200, 0),
-			  $kind->{info_box}),
-	       0, $kind->{action_box},
-	     );
-
-    $widget->add($kind->{main_box});
-    $current_entry = undef;
-    update($kind);
-    $kind;
-}
-
-sub nfs2kind {
-    network::nfs->new({ type => 'nfs', name => 'NFS', val => $all_hds->{nfss}, no_auto => 1 });
-}
-
-sub smb2kind {
-    network::smb->new({ type => 'smb', name => 'Samba', val => $all_hds->{smbs}, no_auto => 1 });
-}
-
-
-1;
diff --git a/perl-install/drakxtools.spec b/perl-install/drakxtools.spec
deleted file mode 100644
index 26f15b1f9..000000000
--- a/perl-install/drakxtools.spec
+++ /dev/null
@@ -1,1096 +0,0 @@
-%define name drakxtools
-%define version 1.1.8
-%define release 1mdk
-
-Summary: The drakxtools (XFdrake, diskdrake, keyboarddrake, mousedrake...)
-Name: %{name}
-Version: %{version}
-Release: %{release}
-Url: http://www.linux-mandrake.com/drakx/
-Source0: drakxtools-%{version}.tar.bz2
-License: GPL
-Group: System/Configuration/Other
-Requires: %{name}-newt = %{version}-%{release}, perl-GTK >= 0.6123, perl-GTK-GdkImlib, XFree86-100dpi-fonts, XFree86-75dpi-fonts, /usr/X11R6/bin/xtest, detect-lst >= 0.9.72, font-tools, usermode >= 1.44-4mdk, perl-MDK-Common >= 1.0.2-13mdk, groff
-Conflicts: drakconf < 0.96-10mdk
-BuildRequires:        e2fsprogs-devel
-BuildRequires:        gcc
-BuildRequires:        gettext
-BuildRequires:        gtk+-devel
-BuildRequires:        ldetect-devel
-BuildRequires:        ncurses-devel
-BuildRequires:        newt-devel
-BuildRequires:        perl-devel
-BuildRoot: %{_tmppath}/%{name}-buildroot
-
-%package newt
-Summary: The drakxtools (XFdrake, diskdrake, keyboarddrake, mousedrake...)
-Group: System/Configuration/Other
-Requires: perl-base >= 5.600-29mdk, urpmi, modutils >= 2.3.11, ldetect-lst >= 0.1.2-32mdk, usermode-consoleonly >= 1.44-4mdk
-Obsoletes: diskdrake setuptool
-Obsoletes: Xconfigurator mouseconfig kbdconfig printtool
-Provides: diskdrake setuptool Xconfigurator mouseconfig kbdconfig printtool
-
-%package http
-Summary: The drakxtools via http
-Group: System/Configuration/Other
-Requires: %{name}-newt = %{version}-%{release}, perl-Net_SSLeay, perl-Authen-PAM, perl-CGI
-
-%package -n harddrake
-Summary: Main Hardware Configuration/Information Tool
-Group: System/Configuration/Hardware
-Requires: %{name} = %{version}-%{release}
-Obsoletes: kudzu, libdetect0, libdetect0-devel
-Provides: kudzu, libdetect0, libdetect0-devel
-
-%description
-Contains XFdrake, diskdrake, keyboarddrake, lspcidrake, mousedrake,
-printerdrake and drakboot.
-
-XFdrake: menu-driven program which walks you through setting up your X
-server. It works on console and under X :)
-It autodetects both monitor and video card if possible.
-
-diskdrake: The purpose of the DiskDrake project is to make hard disk
-partitioning easier. It is graphical, simple and powerful. Different
-skill levels are available (newbie, advanced user, expert). It's
-written entirely in Perl and Perl/Gtk. It uses resize_fat which is a
-perl rewrite of the work of Andrew Clausen (libresize).
-
-drakbackup: backup and restore your system.
-
-drakfont: import some fonts in the system.
-
-keyboarddrake: configures your keyboard (both console and X)
-
-lspcidrake: displays your pci information, *and* the corresponding
-kernel module.
-
-mousedrake: configures and autodetects your mouse
-
-printerdrake: detects and configures your printer
-
-draknet: LAN/Internet connection configuration. It handles ethernet,
-ISDN, DSL, cable, modem.
-
-liveupdate: live update software.
-
-drakboot: configures your boot configuration (Lilo/GRUB, Aurora, X, autologin)
-
-drakautoinst: help you configure an automatic installation replay
-
-drakxtv: auto configure tv card for xawtv grabber
-
-%description newt
-See package %{name}
-
-%description http
-See package %{name}
-
-%description -n harddrake
-This is the main configuration tool for hardware that calls all the
-other configuration tools.
-
-
-%prep
-%setup -q
-
-%build
-make
-
-%install
-rm -rf $RPM_BUILD_ROOT
-
-make PREFIX=$RPM_BUILD_ROOT install
-
-mv ${RPM_BUILD_ROOT}%{_sbindir}/net_monitor \
-   ${RPM_BUILD_ROOT}%{_sbindir}/net_monitor.real
-ln -sf %{_bindir}/consolehelper ${RPM_BUILD_ROOT}%{_sbindir}/net_monitor
-mkdir -p ${RPM_BUILD_ROOT}%{_sysconfdir}/{pam.d,security/console.apps}
-cp pam.net_monitor $RPM_BUILD_ROOT%{_sysconfdir}/pam.d/net_monitor
-cp apps.net_monitor $RPM_BUILD_ROOT%{_sysconfdir}/security/console.apps/net_monitor
-
-dirs1="usr/lib/libDrakX usr/share/libDrakX"
-(cd $RPM_BUILD_ROOT ; find $dirs1 usr/bin usr/sbin ! -type d -printf "/%%p\n") > %{name}.list
-(cd $RPM_BUILD_ROOT ; find $dirs1 -type d -printf "%%%%dir /%%p\n") >> %{name}.list
-
-perl -ni -e '/gtk|icons|pixmaps|XFdrake|bootlook|drakbackup|drakfont|logdrake|net_monitor/ ? print STDERR $_ : print' %{name}.list 2> %{name}-gtk.list
-perl -ni -e '/http/ ? print STDERR $_ : print' %{name}.list 2> %{name}-http.list
-
-#mdk menu entry
-mkdir -p $RPM_BUILD_ROOT/%_menudir
-cat > $RPM_BUILD_ROOT%_menudir/%name <<EOF
-?package(harddrake):\
-	needs="X11"\
-	section="Configuration/Hardware"\
-	title="HardDrake"\
-	longtitle="Hardware Central Configuration/information tool"\
-	command="/usr/sbin/harddrake"\
-	icon="harddrake.png"
-EOF
-mkdir $RPM_BUILD_ROOT%_initrddir/
-mv $RPM_BUILD_ROOT%_sbindir/service_harddrake $RPM_BUILD_ROOT%_initrddir/harddrake2
-
-%find_lang libDrakX
-
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%post
-[[ ! -e /usr/X11R6/bin/Xconfigurator ]] && %__ln_s -f ../sbin/XFdrake /usr/X11R6/bin/Xconfigurator
-
-[[ ! -e %_sbindir/kbdconfig ]] && %__ln_s -f keyboarddrake %_sbindir/kbdconfig
-[[ ! -e %_sbindir/setuptool ]] && %__ln_s -f drakxconf %_sbindir/setuptool
-[[ ! -e %_sbindir/mouseconfig ]] && %__ln_s -f mousedrake %_sbindir/mouseconfig
-[[ ! -e %_bindir/printtool ]] && %__ln_s -f ../sbin/printerdrake %_bindir/printtool
-
-%postun
-for i in /usr/X11R6/bin/Xconfigurator %{_sbindir}/kbdconfig %{_sbindir}/mouseconfig %{_bindir}/printtool;do
-    if [ -L $i ]; then %{__rm} -f $i; fi
-done
-
-
-%post http
-%_post_service drakxtools_http
-
-%preun http
-%_preun_service drakxtools_http
-
-
-%post -n harddrake
-%_post_service harddrake
-%update_menus
-
-%preun -n harddrake
-%_preun_service harddrake
-
-%postun -n harddrake
-%clean_menus
-
-
-%files newt -f %{name}.list -f libDrakX.lang
-%defattr(-,root,root)
-%config(noreplace) /etc/security/fileshare.conf
-%doc diskdrake/diskdrake.html
-%attr(4755,root,root) %{_sbindir}/fileshareset
-
-%files -f %{name}-gtk.list
-%defattr(-,root,root)
-%config(noreplace) %{_sysconfdir}/pam.d/net_monitor
-%config(noreplace) %{_sysconfdir}/security/console.apps/net_monitor
-/usr/X11R6/bin/*
-
-%files -n harddrake
-%defattr(-,root,root)
-%_sbindir/harddrake2
-%_initrddir/harddrake2
-
-%files http -f %{name}-http.list
-%defattr(-,root,root)
-%dir %{_sysconfdir}/drakxtools_http
-%config(noreplace) %{_sysconfdir}/pam.d/miniserv
-%config(noreplace) %{_sysconfdir}/init.d/drakxtools_http
-%config(noreplace) %{_sysconfdir}/drakxtools_http/conf
-%config(noreplace) %{_sysconfdir}/drakxtools_http/authorised_progs
-%config(noreplace) %{_sysconfdir}/logrotate.d/drakxtools-http
-
-%changelog 
-* Sun Jul  7 2002 Daouda LO <daouda@mandrakesoft.com> 1.1.8-1mdk
-- snapshot
-- new entries: 
-	o harddrake2 : new hardware detection && configuration tool
-	o drakbugreport: bug reporting tool a la Kde (not working!)
-	o drakTermServ : configuration tool for diskless stations.
-
-* Tue Jun 18 2002 Frederic Lepied <flepied@mandrakesoft.com> 1.1.7-99mdk
-- added new draksec from Christian and a new way to build the packages (make rpm)
-
-* Mon Apr 15 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.7-98mdk
-- snapshot
-- add drakxtv description
-- drakxtv : now auto guess the country and the freq table
-
-* Fri Mar 15 2002 dam's <damien@mandrakesoft.com> 1.1.7-97mdk
-- snapshot. final release 1
-
-* Tue Mar 12 2002 dam's <damien@mandrakesoft.com> 1.1.7-96mdk
-- added onboot options foreach network cards
-- resolv.conf and domain name bug fixed
-
-* Tue Mar 12 2002 dam's <damien@mandrakesoft.com> 1.1.7-95mdk
-- included drakproxy
-- corrected various timeout (net_monitor, internet connection tests)
-- snapshot
-
-* Mon Mar 11 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-94mdk
-- various
-
-* Fri Mar  8 2002 dam's <damien@mandrakesoft.com> 1.1.7-93mdk
-- drakfont GUI corrected
-- new drakproxy
-
-* Fri Mar 08 2002 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.7-92mdk
-- fixes for NVIDIA drivers support in XFdrake.
-
-* Thu Mar  7 2002 dam's <damien@mandrakesoft.com> 1.1.7-91mdk
-- lot of bugfixes
-- (dams)
-	* standalone/net_monitor: make gc happy
-	* modparm.pm, share/po/fr.po: corrected
-	* standalone/draknet: corrected network/internet restart when already connected
-	* standalone/drakfont: corrected bad system command
-	* standalone/drakautoinst: corrected HASH and ARRAY label
-- (gc)
-	* standalone/drakgw: 
-	  - call net_monitor to disable internet connection before network-restart
-	  - user return value when status'ing the
-	  initscripts rather than grepping their text output
-- (pixel)
-	* standalone/fileshareset (nfs_exports::update_server): ensure portmap is running
-
-* Wed Mar  6 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-90mdk
-- corrected font in wizard (dams)
-- localedrake: (pixel)
-  * fix dummy entries in .i18n for chineese
-  * take sysconfig/i18n into account when no .i18n
-  * when called by kcontrol with --apply, don't modify kde config files,
-    kcontrol takes care of it more nicely
-- diskdrake: translate actions in text mode (pixel)
-- drakxtv fixed (titi)
-
-* Sun Mar  3 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-89mdk
-- (gtkicons_labels_widget): pass the widget instead of directly passing the font
-  (for drakconf)
-
-* Sun Mar  3 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-88mdk
-- (gtkicons_labels_widget): pass the style instead of directly passing the font
-  (for drakconf)
-
-* Fri Mar  1 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-87mdk
-- new snapshot (including a modified localedrake)
-
-* Thu Feb 28 2002 dam's <damien@mandrakesoft.com> 1.1.7-86mdk
-- corrected modinfo path. isa modules options should now work.
-
-* Thu Feb 28 2002 dam's <damien@mandrakesoft.com> 1.1.7-85mdk
-- corrected spec so that net_monitor.real get included too.
-
-* Thu Feb 28 2002 dam's <damien@mandrakesoft.com> 1.1.7-84mdk
-- snapshot
-
-* Wed Feb 27 2002 dam's <damien@mandrakesoft.com> 1.1.7-83mdk
-- snapshot
-
-* Tue Feb 26 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-82mdk
-- move XFdrake to drakxtools from drakxtools-newt 
-(otherwise it doesn't work, since it needs perl-GTK & xtest)
-
-* Tue Feb 26 2002 dam's <damien@mandrakesoft.com> 1.1.7-81mdk
-- added groff require
-
-* Tue Feb 26 2002 dam's <damien@mandrakesoft.com> 1.1.7-80mdk
-- isa card modules correction. Should work in post install
-- drakfont correction
-
-* Sat Feb 23 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-79mdk
-- require latest perl-MDK-Common
-- corrected icon paths (thanks to garrick)
-- don't create devices when /dev is devfs mounted (thanks to Andrej Borsenkow)
-
-* Fri Feb 22 2002 dam's <damien@mandrakesoft.com> 1.1.7-78mdk
-- corrected icon paths
-
-* Thu Feb 21 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-77mdk
-- now we can live without kdesu ; and drakxtools-newt only requires
-  usermode-consoleonly
-
-* Tue Feb 19 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-76mdk
-- fix diskdrake --nfs & --smb
-
-* Tue Feb 19 2002 dam's <damien@mandrakesoft.com> 1.1.7-75mdk
-- required specific version of perl MDK Common
-
-* Tue Feb 19 2002 dam's <damien@mandrakesoft.com> 1.1.7-74mdk
-- various things not described by the last packager
-- new png/wpm search policy in my_gtk
-
-* Mon Feb 18 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-73mdk
-- snapshot
-
-* Sat Feb 16 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-72mdk
-- localedrake now handles KDE
-- diskdrake now handles XFS on LVM live resizing (growing only)
-
-* Fri Feb 15 2002 dam's <damien@mandrakesoft.com> 1.1.7-71mdk
-- snapshot
-
-* Thu Feb 14 2002 dam's <damien@mandrakesoft.com> 1.1.7-70mdk
-- snapshot
-
-* Mon Feb 11 2002 dam's <damien@mandrakesoft.com> 1.1.7-69mdk
-- fixed bad stuff.so in drakxtools
-
-* Fri Feb  8 2002 dam's <damien@mandrakesoft.com> 1.1.7-68mdk
-- new gfx
-- various fix
-- major printerdrake updates
-
-* Thu Feb 07 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.7-67mdk
-- add drakxtv
-
-* Thu Feb  7 2002 dam's <damien@mandrakesoft.com> 1.1.7-66mdk
-- new package, various wizard, mygtk, disdrake improvment.
-
-* Wed Feb  6 2002 dam's <damien@mandrakesoft.com> 1.1.7-65mdk
-- logdrake updates
-- wizard fix
-
-* Tue Jan 29 2002 dam's <damien@mandrakesoft.com> 1.1.7-64mdk
-- last mygtk, drakbackup...
-- disdrake fixed
-- snapshot
-
-* Sun Jan 27 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-63mdk
-- cleanup drakxtools-newt (move all gtk stuff to drakxtools)
-- reworked and split diskdrake
-- add logdrake
-
-* Fri Jan 25 2002 dam's <damien@mandrakesoft.com> 1.1.7-62mdk
-- bug corrections, improvements
-- new advertising engine
-- new gtkicons_labels_widget
-
-* Tue Jan 22 2002 dam's <damien@mandrakesoft.com> 1.1.7-61mdk
-- new gtkicons_labels_widget for new mcc.
-
-* Fri Jan 18 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-60mdk
-- first support for 'Explanations'
-
-* Fri Jan 18 2002 Sebastien Dupont <sdupont@mandrakesoft.com>  1.1.7-59mdk
-- Drakbackup without unstable options for qa. 
-- DrakFont update warning message (qa).
-
-* Wed Jan 16 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-58mdk
-- ensure lsnetdrake is included
-
-* Tue Jan 15 2002 Sebastien Dupont <sdupont@mandrakesoft.com>  1.1.7-57mdk
-- Drakbackup daemon, backend mode (-show-conf -daemon -debug -help -version) and report mail corrections.
-- DrakFont gi and progress bar problems.
-
-* Tue Jan 14 2002 Sebastien Dupont <sdupont@mandrakesoft.com>  1.1.7-56mdk
-- New drakbackup version, ftp backup work, new pixmaps.
-- DrakFont with new pixmaps. 
-
-* Mon Jan 14 2002 Stefan van der Eijk <stefan@eijk.nu> 1.1.7-55mdk
-- BuildRequires
-
-* Fri Jan 11 2002 dam's <damien@mandrakesoft.com> 1.1.7-54mdk
-- snapshot
-
-* Wed Jan  9 2002 dam's <damien@mandrakesoft.com> 1.1.7-53mdk
-- snapshot
-- new code in my_gtk
-
-* Tue Jan  8 2002 Sebastien Dupont <sdupont@mandrakesoft.com>  1.1.7-52mdk
-- New drakbackup version, incremental backup and restore should work. 
-
-* Sat Dec 22 2001 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-51mdk
-- fix  conflicts in drakbackup cvs version.
-
-* Sat Dec 22 2001 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-50mdk
-- new drakbackup version.
-
-* Mon Dec 10 2001 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-49mdk
-- fix drakfont path problem.
-- new version of drakbakup
-
-* Wed Dec  5 2001 dam's <damien@mandrakesoft.com> 1.1.7-48mdk
-- corrected syntax error
-
-* Tue Dec  4 2001 dam's <damien@mandrakesoft.com> 1.1.7-47mdk
-- avoid network test freeze
-- added drackbackup
-- snapshot
-
-* Fri Nov 30 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-46mdk
-- add diskdrake --fileshare
-
-* Thu Nov 29 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-45mdk
-- new diskdrake including fileshareset/filesharelist stuff
-
-* Mon Nov 26 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-44mdk
-- use the CVS, not my devel (instable) version
-
-* Fri Nov 23 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-43mdk
-- any.pm fixed
-
-* Mon Nov 19 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-42mdk
-- scannerdrake update to add dynamic support
-
-* Mon Nov 12 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-41mdk
-- scannerdrake update with new fat ScannerDB
-
-* Mon Nov  5 2001 dam's <damien@mandrakesoft.com> 1.1.7-40mdk
-- corrected typo in drakautoinst
-
-* Fri Nov  2 2001 dam's <damien@mandrakesoft.com> 1.1.7-39mdk
-- release
-
-* Fri Oct 26 2001 dam's <damien@mandrakesoft.com> 1.1.7-38mdk
-- drakautoinst & drakfont updated
-
-* Thu Oct 25 2001 dam's <damien@mandrakesoft.com> 1.1.7-37mdk
-- big improvement on drakautoinst
-- draknet : connection script updated 
-
-* Thu Oct 18 2001 dam's <damien@mandrakesoft.com> 1.1.7-36mdk
-- draknet/net_monitor corrected
-- corrected bad stuff.so
-
-* Tue Oct 16 2001 dam's <damien@mandrakesoft.com> 1.1.7-35mdk
-- make rplint happier
-
-* Wed Oct 10 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-34mdk
-- snapshot with scanner stuff
-
-* Mon Sep 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-33mdk
-- snapshot
-
-* Mon Sep 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-32mdk
-- Last translations.
-
-* Mon Sep 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-31mdk
-- snapshot. draknet bugfix.
-
-* Sun Sep 23 2001 dam's <damien@mandrakesoft.com> 1.1.7-30mdk
-- snapshot. Included last printer and draknet corrections.
-
-* Fri Sep 21 2001 dam's <damien@mandrakesoft.com> 1.1.7-29mdk
-- typo in adsl.pm, Xconfigurator fix.
-
-* Thu Sep 20 2001 dam's <damien@mandrakesoft.com> 1.1.7-28mdk
-- snapshot. draknet works now. 
-
-* Wed Sep 19 2001 dam's <damien@mandrakesoft.com> 1.1.7-27mdk
-- snapshot
-
-* Mon Sep 17 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-26mdk
-- snapshot
-
-* Mon Sep 17 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-25mdk
-- snapshot
-
-* Sat Sep 15 2001 dam's <damien@mandrakesoft.com> 1.1.7-24mdk
-- snapshot with printer, draknet & install fixes
-
-* Fri Sep 14 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.7-23mdk
-- snapshot with latest XFdrake fixes.
-
-* Fri Sep 14 2001 dam's <damien@mandrakesoft.com> 1.1.7-22mdk
-- snapshot
-
-* Thu Sep 13 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.7-21mdk
-- fix Xinerama for Matrox cards (restore XFree86 4.1.0 without DRI).
-- removed Modeline 1024x768 in 97.6 Hz which troubles XF4 a lot.
-
-* Thu Sep 13 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.7-20mdk
-- snapshot with XFdrake fixes (G550 support, no DRI with Xinerama,
-  no XFree86 3.3.6 proposed wiht dual head).
-
-* Wed Sep 12 2001 dam's <damien@mandrakesoft.com> 1.1.7-19mdk
-- snapshot
-
-* Wed Sep 12 2001 dam's <damien@mandrakesoft.com> 1.1.7-18mdk
-- snapshot.
-
-* Mon Sep 10 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-17mdk
-- remove dependency on "perl" since pixel added Data::Dumper in perl-base
-
-* Mon Sep 10 2001 dam's <damien@mandrakesoft.com> 1.1.7-16mdk
-- new snapshot, bug corrections.
-
-* Thu Sep  6 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-15mdk
-- drakgw should be working now
-
-* Tue Sep 04 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-14mdk
-- snaphsot, better interaction with mcc (diskdrake printerdrake).
-
-* Tue Sep  4 2001 dam's <damien@mandrakesoft.com> 1.1.7-13mdk
-- snapshot.
-
-* Thu Aug 30 2001 dam's <damien@mandrakesoft.com> 1.1.7-12mdk
-- snapshot. locales corected, nicer wizards.
-
-* Thu Aug 30 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.7-11mdk
-- new snapshot, mousedrake fixes again.
-
-* Wed Aug 29 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.7-10mdk
-- new snapshot, mousedrake fixes.
-
-* Fri Aug 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-9mdk
-- snapshot for 8.1 beta2.
-
-* Fri Aug 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-8mdk
-- bugfix.
-- new snapshot. mousedrake experimental.
-
-* Thu Aug 23 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-7mdk
-- fix drakboot bug
-- macros to fix some rpmlint warnings
-
-* Wed Aug 22 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-6mdk
-- put a require on "perl" which is needed for Data::Dumper in drakautoinst
-
-* Wed Aug 22 2001 dam's <damien@mandrakesoft.com> 1.1.7-5mdk
-- snapshot. draknet improvments, bug fixes.
-
-* Mon Aug 20 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-4mdk
-- new fstab munching code
-
-* Sat Aug 18 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-3mdk
-- new diskdrake (with interactive version => newt)
-- drakxtools-http fix
-
-* Tue Aug 14 2001 dam's <damien@mandrakesoft.com> 1.1.7-2mdk
-- added doc (it's a shame...)
-
-* Tue Aug 14 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-1mdk
-- add drakautoinst
-
-* Mon Aug 13 2001 dam's <damien@mandrakesoft.com> 1.1.6-3mdk
-- snapshot
-
-* Tue Aug  7 2001 dam's <damien@mandrakesoft.com> 1.1.6-2mdk
-- added draknet_splash pixmap
-
-* Tue Aug  7 2001 Pixel <pixel@mandrakesoft.com> 1.1.6-1mdk
-- add drakxtools_http
-
-* Fri Aug  3 2001 dam's <damien@mandrakesoft.com> 1.1.5-106mdk
-- added network/*.pm
-
-* Tue Jul 31 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-105mdk
-- add require perl-MDK-Common
-- fix for cp -rf (fuck FreeBSD (c))
-
-* Tue Jul 31 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-104mdk
-- fix my error: %%files with 2 times "-f <file>" doesn't work :-(
-
-* Mon Jul 30 2001 dam's <damien@mandrakesoft.com> 1.1.5-103mdk
-- updated with cooker install.
-- added require on XFree86-75dpi-fonts
-- merged with pixel specfile to handle mo.
-
-* Mon May  7 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-102mdk
-- updated bootloader.pm according to new lilo package (lilo-{menu,graphic,text})
-
-* Wed Apr 25 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.5-101mdk
-- updated with oem update for DrakX.
-- minor bug correction on printerdrake.
-- added minor features to XFdrake.
-
-* Wed Apr 18 2001 dam's <damien@mandrakesoft.com> 1.1.5-100mdk
-- added require on usermode.
-- added source 2 and 3.
-- snapshot. netconnect corrections. final package
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-99mdk
-- snapshot. mousedrake corrected. RC6
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-98mdk
-- snapshot. autologin corrected. RC5
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-97mdk
-- snapshot. RC4
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-96mdk
-- snapshot. RC3
-
-* Mon Apr 16 2001 dam's <damien@mandrakesoft.com> 1.1.5-95mdk
-- snapshot. RC2
-
-* Mon Apr 16 2001 dam's <damien@mandrakesoft.com> 1.1.5-94mdk
-- snapshot. RC
-
-* Mon Apr 16 2001 dam's <damien@mandrakesoft.com> 1.1.5-93mdk
-- draknet and tinyfirewall fixes
-
-* Sun Apr 15 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-92mdk
-- bootlook fix & layout
-
-* Fri Apr 13 2001 dam's <damien@mandrakesoft.com> 1.1.5-91mdk
-- snapshot
-
-* Fri Apr 13 2001 dam's <damien@mandrakesoft.com> 1.1.5-90mdk
-- snapshot
-
-* Thu Apr 12 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-89mdk
-- snapshot
-
-* Thu Apr 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-88mdk
-- snapshot. pcmcia network corrected
-
-* Thu Apr 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-87mdk
-- snapshot. Better network configuration
-
-* Thu Apr 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-86mdk
-- snapshot.
-
-* Wed Apr 11 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.5-85mdk
-- really fix printerdrake and snap.
-
-* Wed Apr 11 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.5-84mdk
-- fix printerdrake and snap.
-
-* Tue Apr 10 2001 dam's <damien@mandrakesoft.com> 1.1.5-83mdk
-- bug correction.
-
-* Mon Apr  9 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-82mdk
-- snap as always
-
-* Mon Apr  9 2001 Yves Duret <yduret@mandraksoft.com> 1.1.5-81mdk
-- snaphshot again and again
-
-* Mon Apr  9 2001 dam's <damien@mandrakesoft.com> 1.1.5-80mdk
-- snapshot. bug fix
-
-* Sun Apr  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-79mdk
-- snapshot. bug fix.
-
-* Sun Apr  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-78mdk
-- added require on XFree86-100dpi-fonts
-- various debugging
-- new tinyfirewall
-
-* Sun Apr  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-77mdk
-- snapshot
-- net_monitor added.
-
-* Fri Apr  6 2001 dam's <damien@mandrakesoft.com> 1.1.5-76mdk
-- corrected compilation error.
-
-* Fri Apr  6 2001 yves <yduret@mandrakesoft.com> 1.1.5-75mdk
-- snapshot : drakgw updated, boot config fix
-
-* Thu Apr  5 2001 dam's <damien@mandrakesoft.com> 1.1.5-74mdk
-- snapshot.
-
-* Mon Apr  2 2001 dam's <damien@mandrakesoft.com> 1.1.5-73mdk
-- snapshot.
-
-* Mon Apr  2 2001 dam's <damien@mandrakesoft.com> 1.1.5-72mdk
-- snapshot, typo fixs.
-
-* Fri Mar 30 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-71mdk
-- snapshot & fixes
-
-* Fri Mar 30 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-70mdk
-- snapshot : boot coonfig updated
-
-* Thu Mar 29 2001 dam's <damien@mandrakesoft.com> 1.1.5-69mdk
-- snapshot
-
-* Thu Mar 29 2001 dam's <damien@mandrakesoft.com> 1.1.5-68mdk
-- snapshot.
-
-* Thu Mar 29 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-67mdk
-- new snapshot (XFdrake should be working)
-
-* Wed Mar 28 2001 dam's <damien@mandrakesoft.com> 1.1.5-66mdk
-- corrected tinyfirewall last step
-
-* Wed Mar 28 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.5-65mdk
-- fixed wrong generation of second mouse support
-
-* Wed Mar 28 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.5-64mdk
-- fixed multi-mouse support for XF3
-- fixed XFdrake (read old config file before so probe overwrite)
-
-* Wed Mar 28 2001 dam's <damien@mandrakesoft.com> 1.1.5-63mdk
-- added draksec embedded mode
-- corrected tinyfirewall for 2.4 kernels
-- corrected bad translations in draknet
-
-* Tue Mar 27 2001 dam's <damien@mandrakesoft.com> 1.1.5-62mdk
-- idem.
-
-* Sat Mar 24 2001 dam's <damien@mandrakesoft.com> 1.1.5-61mdk
-- corrected tinyfirewall
-
-* Fri Mar 23 2001 dam's <damien@mandrakesoft.com> 1.1.5-60mdk
-- snapshot
-- corrected require.
-
-* Fri Mar 23 2001 dam's <damien@mandrakesoft.com> 1.1.5-59mdk
-- added ldetect in require.
-- tinyfirewall included.
-
-* Thu Mar 22 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-58mdk
-- updated drakboot, new snapshot
-
-* Thu Mar 22 2001 dam's <damien@mandrakesoft.com> 1.1.5-57mdk
-- draknet without mail conf, new snapshot.
-
-* Thu Mar 22 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-56mdk
-- new version that will work with perl-base (at least XFdrake)
-
-* Thu Mar 22 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-55mdk
-- require perl-base not perl, it should be enough
-
-* Thu Mar 22 2001 dam's <damien@mandrakesoft.com> 1.1.5-54mdk
-- first release with tinyfirewall. Not stable.
-- corrected gmon pb, I suck.
-
-* Tue Mar 20 2001 dam's <damien@mandrakesoft.com> 1.1.5-53mdk
-- corrected bad links.
-
-* Tue Mar 20 2001 dam's <damien@mandrakesoft.com> 1.1.5-52mdk
-- no crash anymore.
-
-* Tue Mar 20 2001 dam's <damien@mandrakesoft.com> 1.1.5-51mdk
-- updated draknet. new snapshot.
-
-* Wed Mar 14 2001 dam's <damien@mandrakesoft.com> 1.1.5-50mdk
-- some minor label improvements.
-
-* Tue Mar 13 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-49mdk
-- updated bootlook
-- macros
-
-* Mon Mar 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-48mdk
-- correted wizard pixmaps name
-
-* Mon Mar 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-47mdk
-- new and shinny drakxservices
-
-* Tue Mar  6 2001 dam's <damien@mandrakesoft.com> 1.1.5-46mdk
-- XFdrake works + other improvements
-
-* Thu Mar  1 2001 dam's <damien@mandrakesoft.com> 1.1.5-45mdk
-- updated embedded mode.
-
-* Wed Feb 28 2001 dam's <damien@mandrakesoft.com> 1.1.5-44mdk
-- XFdrake : new look.
-- draknet : some corrections.
-- install : some improvements
-
-* Mon Feb 26 2001 dam's <damien@mandrakesoft.com> 1.1.5-43mdk
-- corrected draknet, and some other stuff
-
-* Mon Feb 26 2001 dam's <damien@mandrakesoft.com> 1.1.5-42mdk
-- new draknet, with wizard and profiles.
-- drakboot short-circuited.
-- new pixmaps policy.
-
-* Fri Feb 23 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-41mdk
-- require perl-GTK-GdkImlib, fix XFdrake and draknet with no perl-GTK
-
-* Fri Feb 23 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-40mdk
-- split in drakxtools and drakxtools-newt
-
-* Thu Feb  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-39mdk
-- install() and SHAR_PATH bug fixed in standalone.pm
-
-* Thu Feb  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-38mdk
-- bug fix.
-
-* Thu Feb  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-37mdk
-- bug correction inclusion.
-
-* Wed Feb  7 2001 dam's <damien@mandrakesoft.com> 1.1.5-36mdk
-- snapshot. Included embedded mode (for control-center), and wizard mode.
-
-* Mon Dec 18 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-35mdk
-- new version (lspcidrake not here anymore, requires ldetect-lst => don't
-include pcitable/... anymore)
-
-
-* Tue Nov 14 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-34mdk
-- snapshot
-- get rid of the rpmlib dependency
-
-* Sat Oct 21 2000 dam's <damien@mandrakesoft.com> 1.1.5-33mdk
-- RC1_fixed tagged cvs version.
-- Video cards handling enhanced
-- isa isdn-cards and non detected isdn pci-cards spported.
-
-* Thu Oct 19 2000 dam's <damien@mandrakesoft.com> 1.1.5-32mdk
-- snapshot.
-
-* Mon Oct  9 2000 dam's <damien@mandrakesoft.com> 1.1.5-31mdk
-- snapshot.
-
-* Fri Oct  6 2000 dam's <damien@mandrakesoft.com> 1.1.5-30mdk
-- snapshot.
-
-* Fri Oct  6 2000 dam's <damien@mandrakesoft.com> 1.1.5-29.1mdk
-- snapshot. not fully stable.
-
-* Thu Oct  5 2000 dam's <damien@mandrakesoft.com> 1.1.5-29mdk
-- snapshot.
-
-* Thu Oct 05 2000 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.5-28mdk
-- snapshot.
-
-* Tue Oct 03 2000 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.5-27mdk
-- snapshot.
-
-* Sun Oct  1 2000 dam's <damien@mandrakesoft.com> 1.1.5-26mdk
-- snapshot.
-
-* Sat Sep 30 2000 dam's <damien@mandrakesoft.com> 1.1.5-25mdk
-- snapshot.
-
-* Sat Sep 30 2000 dam's <damien@mandrakesoft.com> 1.1.5-24mdk
-- snapshot. draknet frozen.
-
-* Fri Sep 29 2000 dam's <damien@mandrakesoft.com> 1.1.5-23mdk
-- snapshot.
-
-* Thu Sep 28 2000 dam's <damien@mandrakesoft.com> 1.1.5-22mdk
-- modified spec.
-- snapshot
-- liveupdate
-
-* Wed Sep 27 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-21mdk
-- snapshot
-
-* Tue Sep 26 2000 dam's <damien@mandrakesoft.com> 1.1.5-20mdk
-- snapshot
-
-* Mon Sep 25 2000 dam's <damien@mandrakesoft.com> 1.1.5-19mdk
-- snapshot.
-
-* Fri Sep 22 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-18mdk
-- new snapshot
-- remove BuildRequires kudzu-devel, I suck bigtime..
-
-* Thu Sep 21 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-17mdk
-- new snapshot
-- BuildRequires kudzu-devel since ddcprobe/ddcxinfos.c uses /usr/include/vbe.h
-
-* Wed Sep 20 2000 dam's <damien@mandrakesoft.com> 1.1.5-16mdk
-- cvs snapshot. See changelog file
-
-* Wed Sep 20 2000 dam's <damien@mandrakesoft.com> 1.1.5-15mdk
-- cvs snapshot. See changelog file
-
-* Fri Sep 15 2000 dam's <damien@mandrakesoft.com> 1.1.5-14mdk
-- cvs snapshot.
-- draknet : better dsl configuration.
-
-* Thu Sep 14 2000 dam's <damien@mandrakesoft.com> 1.1.5-13mdk
-- cvs snapshot.
-- draknet : wizard mode. isdn_db.txt moved to /usr/share. No makedev.sh any more
-
-* Mon Sep 11 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-12mdk
-- add handling for gnome and kde2 in Xdrakres
-
-* Thu Sep  7 2000 dam's <damien@mandrakesoft.com> 1.1.5-11mdk
-- corrected draknet launch error.
-
-* Thu Sep  7 2000 dam's <damien@mandrakesoft.com> 1.1.5-10mdk
-- ISDN connection should work. test it!
-
-* Tue Sep  5 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-9mdk
-- setAutologin fixed in XFdrake
-
-* Tue Sep  5 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-8mdk
-- adduserdrake fixed
-
-* Sat Sep  2 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-7mdk
-- fix some typos in standalone/keyboarddrake
-- add require perl
-
-* Sat Sep  2 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-6mdk
-- add %%lang tags
-
-* Tue Aug 29 2000 dam's <damien@mandrakesoft.com> 1.1.5-5mdk
-- draknet : isa cards better recognized.
-
-* Mon Aug 28 2000 dam's <damien@mandrakesoft.com> 1.1.5-4mdk
-- corrected draknet. Please test it!
-
-* Sun Aug 27 2000 dam's <damien@mandrakesoft.com> 1.1.5-3mdk
-- Added draknet in standalone
-
-* Fri Aug 18 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-2mdk
-- add requires to modutils >= 2.3.11 because drakgw is reading
-  /etc/modules.conf which has been introduced in 2.3.11
-
-* Fri Aug 18 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-1mdk
-- added `drakgw' in standalone (Internet Connection Sharing tool)
-
-* Fri Aug 11 2000 Pixel <pixel@mandrakesoft.com> 1.1.4-3mdk
-- new snapshot
-
-* Thu Aug 10 2000 Pixel <pixel@mandrakesoft.com> 1.1.4-2mdk
-- add noreplace for diskdrake.rc
-
-* Thu Aug 10 2000 Pixel <pixel@mandrakesoft.com> 1.1.4-1mdk
-- new snapshot
-
-* Mon Aug 07 2000 Frederic Lepied <flepied@mandrakesoft.com> 1.1.3-2mdk
-- automatically added BuildRequires
-
-* Fri Jul 21 2000 Pixel <pixel@mandrakesoft.com> 1.1.3-1mdk
-- new version, BM
-
-* Wed Jul 05 2000 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.2-2mdk
-- build against new libbz2
-
-* Mon Jun 26 2000 Pixel <pixel@mandrakesoft.com> 1.1.2-1mdk
-- new version
-
-* Tue Jun 13 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-13mdk
-- hopefully fix XFdrake and DDR nvidia cards (silly xfree that is)
-
-* Mon Jun  5 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-12mdk
-- fix sbus missing
-
-* Sat Jun  3 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-10mdk
-- fix draksec calling init.sh instead of msec
-
-* Thu May 25 2000 Chmouel Boudjnah <chmouel@mandrakesoft.com> 1.1.1-9mdk
-- Don't display x86 stuff on drakboot when we are on others arch.
-
-* Thu May 25 2000 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.1-8mdk
-- update with first version for sparc and sparc64.
-- fix for printer configuration for SAMBA and NCP (security issue).
-
-* Tue May  9 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-7mdk
-- many small fixes (bis)
-
-* Tue May  2 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-6mdk
-- many small fixes
-
-* Wed Apr 26 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-5mdk
-- new version (fix in adduserdrake, enhance interactive_newt)
-
-* Wed Apr 19 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-4mdk
-- llseek works, not lseek64 :(  (need more testing)
-
-* Wed Apr 19 2000 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.1-3mdk
-- updated with CVS of DrakX.
-
-* Fri Mar 31 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-2mdk
-- obsoletes setuptool, link setuptool to drakxconf
-
-* Fri Mar 31 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-1mdk
-- new version (added drakboot for lilo/grub, XFdrake -xf4 for XFree4)
-
-* Sat Mar 25 2000 Pixel <pixel@mandrakesoft.com> 1.1-1mdk
-- new group
-- new version
-
-* Wed Jan 12 2000 Fran�ois PONS <fpons@mandrakesoft.com>
-- complete update with DrakX, small fixe on printerdrake again.
-
-* Wed Jan 12 2000 Fran�ois PONS <fpons@mandrakesoft.com>
-- corrected missing generic postscript and text driver for
-  printderdrake.
-
-* Wed Jan 12 2000 Fran�ois PONS <fpons@mandrakesoft.com>
-- corrected bad resolution setting in printerdrake.
-
-* Wed Jan 12 2000 Fran�ois PONS <fpons@mandrakesoft.com>
-- fixed print on STDOUT in printerdrake.
-- corrected printerdrake against not available drivers in gs.
-
-* Mon Jan 10 2000 Pixel <pixel@mandrakesoft.com>
-- new version (bis)
-- printerdrake install rhs-printfilters via urpmi if needed
-
-* Fri Jan 07 2000 Fran�ois PONS <fpons@mandrakesoft.com>
-- updated XFdrake and PrinterDrake.
-
-* Fri Jan  7 2000 Pixel <pixel@mandrakesoft.com>
-- fixed a bug causing no i18n for rpmdrake
-- add require urpmi
-
-* Thu Jan  6 2000 Pixel <pixel@mandrakesoft.com>
-- fix an error case in XFdrake
-
-* Tue Jan  4 2000 Pixel <pixel@mandrakesoft.com>
-- adduserdrake accept user names on command line
-- minor fixes
-
-* Fri Dec 31 1999 Pixel <pixel@mandrakesoft.com>
-- 32mdk
-
-* Wed Dec 29 1999 Pixel <pixel@mandrakesoft.com>
-- make rpmlint happier
-- minor fixes
-
-* Mon Dec 27 1999 Pixel <pixel@mandrakesoft.com>
-- better XFdrake and minor fixes
-
-* Fri Dec 24 1999 Pixel <pixel@mandrakesoft.com>
-- new version (better adduserdrake and more)
-- add /usr/bin/* (for lspcidrake)
-
-* Wed Dec 22 1999 Pixel <pixel@mandrakesoft.com>
-- do not try display :0 if DISPLAY is unset
-
-* Mon Dec 20 1999 Pixel <pixel@mandrakesoft.com>
-- fixed a bug in drakxservices
-- XFdrake now install XFree86 and XFree86-75dpi-fonts if needed
-- XFdrake now calls /etc/rc.d/init.d/xfs start if needed
-- minor fix
-
-* Sat Dec 18 1999 Pixel <pixel@mandrakesoft.com>
-- added kpackage's icons for rpmdrake
-
-* Thu Dec 16 1999 Pixel <pixel@mandrakesoft.com>
-- bzip2 .po's
-- mount /proc in XFdrake to avoid freeze when called by kudzu
-- added Xdrakres
-
-* Thu Dec 16 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- Remove the netdrake ghost.
-
-* Thu Dec 16 1999 Pixel <pixel@mandrakesoft.com>
-- fix draksec
-- many changes in libDrakX
-
-* Sat Dec 11 1999 Pixel <pixel@mandrakesoft.com>
-- adduserdrake added and some more
-
-* Thu Dec  9 1999 Pixel <pixel@linux-mandrake.com>
-- added drakxconf, drakxservices
-- handle non root via kdesu if X
-- warning go to syslog
-
-* Wed Dec  8 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- Add %post and %postun to link redhat tools to our tools.
-- Obsoletes: Xconfigurator mouseconfig kbdconfig printtool
-- A lots of changes/fix.
-
-* Thu Dec  2 1999 Pixel <pixel@linux-mandrake.com>
-- keyboarddrake added, and many changes
-- fixed typos
-
-* Fri Nov 26 1999 Pixel <pixel@linux-mandrake.com>
-- new version (printerdrake) (did i say lspcidrake was there too?)
-
-* Wed Nov 24 1999 Pixel <pixel@linux-mandrake.com>
-- new version
-- fixed *.o bundled in the %source
-
-* Sun Nov 21 1999 Pixel <pixel@mandrakesoft.com>
-- removed %config for diskdrake.rc (should i?)
-- removed xtest from the requires
-- added %config for diskdrake.rc (should i?)
-- strip .so and ddcxinfos (nice rpmlint :)
-
-* Sat Nov 20 1999 Pixel <pixel@mandrakesoft.com>
-- added MonitorsDB to %files (silly me:-!)
-
-* Thu Nov 18 1999 Pixel <pixel@mandrakesoft.com>
-- precised the required version for perl-GTK
-
-* Thu Nov 18 1999 Pixel <pixel@mandrakesoft.com>
-- First version
-
-
-# end of file
diff --git a/perl-install/fs.pm b/perl-install/fs.pm
deleted file mode 100644
index 10da0e72c..000000000
--- a/perl-install/fs.pm
+++ /dev/null
@@ -1,868 +0,0 @@
-package fs; # $Id$
-
-use diagnostics;
-use strict;
-
-use MDK::Common::System;
-use MDK::Common::Various;
-use common;
-use log;
-use devices;
-use partition_table qw(:types);
-use run_program;
-use swap;
-use detect_devices;
-use modules;
-use fsedit;
-use loopback;
-
-
-sub read_fstab {
-    my ($prefix, $file, $all_options) = @_;
-
-    my %comments;
-    my $comment;
-    my @l = grep {
-	if (/^\s*#/) {
-	    $comment .= chomp_($_) . "\n";
-	    0;
-	} else {
-	    $comments{$_} = $comment if $comment;
-	    $comment = '';
-	    1;
-	}
-    } cat_("$prefix$file");
-
-    #- attach comments at the end of fstab to the previous line
-    $comments{$l[-1]} = $comment if $comment;
-
-    map {
-	my ($dev, $mntpoint, $type, $options, $freq, $passno) = split;
-	my $comment = $comments{$_};
-
-	$options = 'defaults' if $options eq 'rw'; # clean-up for mtab read
-
-	$type = fs2type($type);
-	if ($type eq 'supermount') {
-	    # normalize this bloody supermount
-	    $options = join(",", 'supermount', grep {
-		if (/fs=(.*)/) {
-		    $type = $1;
-		    0;
-		} elsif (/dev=(.*)/) {
-		    $dev = $1;
-		    0;
-		} elsif ($_ eq '--') {
-		    0;
-		} else {
-		    1;
-		}
-	    } split(',', $options));
-	} elsif ($type eq 'smb') {
-	    # prefering type "smbfs" over "smb"
-	    $type = 'smbfs';
-	}
-	$mntpoint =~ s/\\040/ /g;
-	$dev =~ s/\\040/ /g;
-
-	my $h = { 
-		 device => $dev, mntpoint => $mntpoint, type => $type, 
-		 options => $options, comment => $comment,
-		 if_($all_options, freq => $freq, passno => $passno),
-		};
-
-	($h->{major}, $h->{minor}) = unmakedev((stat "$prefix$dev")[6]);
-
-	if ($dev =~ m,/(tmp|dev)/,) {
-	    my $symlink = readlink("$prefix$dev");
-	    $dev =~ s,/(tmp|dev)/,,;
-
-	    if ($symlink =~ m|^[^/]+$|) {
-		$h->{device_alias} = $dev;
-		$h->{device} = $symlink;
-	    } else {
-		$h->{device} = $dev;
-	    }
-	}
-
-	if ($h->{options} =~ /credentials=/) {
-	    require network::smb;
-	    #- remove credentials=file with username=foo,password=bar,domain=zoo
-	    #- the other way is done in fstab_to_string
-	    my ($options, $unknown) = mount_options_unpack($h);
-	    my $file = delete $options->{'credentials='};
-	    my $credentials = network::smb::read_credentials_raw("$prefix$file");
-	    if ($credentials->{username}) {
-		$options->{"$_="} = $credentials->{$_} foreach qw(username password domain);
-		mount_options_pack($h, $options, $unknown);
-	    }
-	}
-
-	$h;
-    } @l;
-}
-
-sub merge_fstabs {
-    my ($loose, $fstab, @l) = @_;
-
-    foreach my $p (@$fstab) {
-	my ($p2) = grep { fsedit::is_same_hd($_, $p) } @l or next;
-	@l       = grep { !fsedit::is_same_hd($_, $p) } @l;
-
-	$p->{mntpoint} = $p2->{mntpoint} if delete $p->{unsafeMntpoint};
-
-	$p->{type} = $p2->{type} if $p2->{type} && !$loose;
-	$p->{options} = $p2->{options} if $p2->{options} && !$loose;
-	#- important to get isMounted property else DrakX may try to mount already mounted partitions :-(
-	add2hash($p, $p2);
-	$p->{device_alias} ||= $p2->{device_alias} || $p2->{device} if $p->{device} ne $p2->{device} && $p2->{device} !~ m|/|;
-
-	$p->{type} && $p2->{type} && $p->{type} ne $p2->{type} && type2fs($p) ne type2fs($p2) &&
-	  $p->{type} ne 'auto' && $p2->{type} ne 'auto' and
-	    log::l("err, fstab and partition table do not agree for $p->{device} type: " .
-		   (type2fs($p) || type2name($p->{type})) . " vs ", (type2fs($p2) || type2name($p2->{type})));
-    }
-    @l;
-}
-
-sub add2all_hds {
-    my ($all_hds, @l) = @_;
-
-    @l = merge_fstabs('', [ fsedit::get_really_all_fstab($all_hds) ], @l);
-
-    foreach (@l) {
-	my $s = 
-	    isThisFs('nfs', $_) ? 'nfss' :
-	    isThisFs('smbfs', $_) ? 'smbs' :
-	    'special';
-	push @{$all_hds->{$s}}, $_;
-    }
-}
-
-sub get_major_minor {
-    eval {
-	my (undef, $major, $minor) = devices::entry($_->{device});
-	($_->{major}, $_->{minor}) = ($major, $minor);
-    } foreach @_;
-}
-
-sub merge_info_from_mtab {
-    my ($fstab) = @_;
-
-    my @l1 = map { my $l = $_; 
-		   my %l = (type => fs2type('swap')); 
-		   $l{$_} = $l->{$_} foreach qw(device major minor); 
-		   \%l;
-	       } read_fstab('', '/proc/swaps');
-    
-    my @l2 = map { read_fstab('', $_) } '/etc/mtab', '/proc/mounts';
-
-    foreach (@l1, @l2) {
-	log::l("found mounted partition on $_->{device} with $_->{mntpoint}");
-	if ($::isInstall && $_->{mntpoint} eq '/tmp/hdimage') {
-	    log::l("found hdimage on $_->{device}");
-	    $_->{real_mntpoint} = delete $_->{mntpoint};
-	    $_->{mntpoint} = common::usingRamdisk() && "/mnt/hd"; #- remap for hd install.
-	}
-	$_->{isMounted} = $_->{isFormatted} = 1;
-	delete $_->{options};
-    } 
-    merge_fstabs('loose', $fstab, @l1, @l2);
-}
-
-# - when using "$loose", it does not merge in type&options from the fstab
-sub merge_info_from_fstab {
-    my ($fstab, $prefix, $uniq, $loose) = @_;
-
-    my @l = grep { 
-	if ($uniq) {
-	    my $part = fsedit::mntpoint2part($_->{mntpoint}, $fstab);
-	    !$part || fsedit::is_same_hd($part, $_); #- keep it only if it is the mountpoint AND the same device
-	} else {
-	    1;
-	}
-    } read_fstab($prefix, "/etc/fstab", 'all_options');
-
-    merge_fstabs($loose, $fstab, @l);
-}
-
-sub prepare_write_fstab {
-    my ($all_hds, $prefix, $keep_smb_credentials) = @_;
-    $prefix ||= '';
-
-    my @l1 = (fsedit::get_really_all_fstab($all_hds), @{$all_hds->{special}});
-    my @l2 = read_fstab($prefix, "/etc/fstab", 'all_options');
-
-    {
-	#- remove entries from @l2 that are given by @l1
-	#- this is needed to allow to unset a mount point
-	my %new; 
-	$new{$_->{device}} = 1 foreach @l1;
-	delete $new{none}; #- special case for device "none" which can be _mounted_ more than once
-	@l2 = grep { !$new{$_->{device}} } @l2;
-    }
-
-    my %new;
-    my @smb_credentials;
-    my @l = map { 
-	my $device = 
-	  $_->{device} eq 'none' || member($_->{type}, qw(nfs smbfs)) ? 
-	      $_->{device} : 
-	  isLoopback($_) ? 
-	      ($_->{mntpoint} eq '/' ? "/initrd/loopfs" : "$_->{loopback_device}{mntpoint}") . $_->{loopback_file} :
-	  do {
-	      my $dir = $_->{device} =~ m|^/| ? '' : '/dev/';
-	      eval { devices::make("$prefix$dir$_->{device}") };
-	      "$dir$_->{device}";
-	  };
-
-	my $real_mntpoint = $_->{mntpoint} || ${{ '/tmp/hdimage' => '/mnt/hd' }}{$_->{real_mntpoint}};
-	mkdir("$prefix$real_mntpoint", 0755) if $real_mntpoint =~ m|^/|;
-	my $mntpoint = loopback::carryRootLoopback($_) ? '/initrd/loopfs' : $real_mntpoint;
-
-	my ($freq, $passno) =
-	  exists $_->{freq} ?
-	    ($_->{freq}, $_->{passno}) :
-	  isTrueFS($_) && $_->{options} !~ /encryption=/ ? 
-	    (1, $_->{mntpoint} eq '/' ? 1 : loopback::carryRootLoopback($_) ? 0 : 2) : 
-	    (0, 0);
-
-	if (($device eq 'none' || !$new{$device}) && ($mntpoint eq 'swap' || !$new{$mntpoint})) {
-	    #- keep in mind the new line for fstab.
-	    $new{$device} = 1;
-	    $new{$mntpoint} = 1;
-
-	    my $options = $_->{options};
-
-	    if (isThisFs('smbfs', $_) && $options =~ /password=/ && !$keep_smb_credentials) {
-		require network::smb;
-		if (my ($opts, $smb_credentials) = network::smb::fstab_entry_to_credentials($_)) {
-		    $options = $opts;
-		    push @smb_credentials, $smb_credentials;
-		}
-	    }
-
-	    my $type = type2fs($_);
-
-	    my $dev = $_->{device_alias} ? "/dev/$_->{device_alias}" : $device;
-
-	    $mntpoint =~ s/ /\\040/g;
-	    $dev =~ s/ /\\040/g;
-
-	    # handle bloody supermount special case
-	    if ($options =~ /supermount/) {
-		my @l = grep { $_ ne 'supermount' } split(',', $options);
-		my @l1 = grep { member($_, 'ro', 'exec') } @l;
-		my @l2 = difference2(\@l, \@l1);
-		$options = join(",", "dev=$dev", "fs=$type", @l1, if_(@l2, '--', @l2));
-		($dev, $type) = ('none', 'supermount');
-	    }
-
-	    [ $mntpoint, $_->{comment} . join(' ', $dev, $mntpoint, $type, $options || 'defaults', $freq, $passno) . "\n" ];
-	} else {
-	    ()
-	}
-    } grep { $_->{device} && ($_->{mntpoint} || $_->{real_mntpoint}) && $_->{type} } (@l1, @l2);
-
-    join('', map { $_->[1] } sort { $a->[0] cmp $b->[0] } @l), \@smb_credentials;
-}
-
-sub fstab_to_string {
-    my ($all_hds, $prefix) = @_;
-    my ($s, undef) = prepare_write_fstab($all_hds, $prefix, 'keep_smb_credentials');
-    $s;
-}
-
-sub write_fstab {
-    my ($all_hds, $prefix) = @_;
-    log::l("writing $prefix/etc/fstab");
-    my ($s, $smb_credentials) = prepare_write_fstab($all_hds, $prefix, '');
-    output("$prefix/etc/fstab", $s);
-    network::smb::save_credentials($_) foreach @$smb_credentials;
-}
-
-sub auto_fs() {
-    grep { chop; $_ && !/nodev/ } cat_("/etc/filesystems");
-}
-
-sub mount_options {
-    my %non_defaults = (
-			sync => 'async', noatime => 'atime', noauto => 'auto', ro => 'rw', 
-			user => 'nouser', nodev => 'dev', noexec => 'exec', nosuid => 'suid',
-		       );
-    my @user_implies = qw(noexec nodev nosuid);
-    \%non_defaults, \@user_implies;
-}
-
-# simple function
-# use mount_options_unpack + mount_options_pack for advanced stuff
-sub add_options(\$@) {
-    my ($option, @options) = @_;
-    my %l; @l{split(',', $$option), @options} = (); delete $l{defaults};
-    $$option = join(',', keys %l) || "defaults";
-}
-
-sub mount_options_unpack {
-    my ($part) = @_;
-    my $packed_options = $part->{options};
-
-    my ($non_defaults, $user_implies) = mount_options();
-
-    my @auto_fs = auto_fs();
-    my %per_fs = (
-		  iso9660 => [ qw(unhide) ],
-		  vfat => [ qw(umask=0) ],
-		  nfs => [ qw(rsize=8192 wsize=8192) ],
-		  smbfs => [ qw(username= password=) ],
-		  reiserfs => [ 'notail' ],
-		 );
-    push @{$per_fs{$_}}, 'usrquota', 'grpquota' foreach 'ext2', 'ext3', 'xfs';
-
-    while (my ($fs, $l) = each %per_fs) {
-	isThisFs($fs, $part) || $part->{type} eq 'auto' && member($fs, @auto_fs) or next;
-	$non_defaults->{$_} = 1 foreach @$l;
-    }
-
-    $non_defaults->{encrypted} = 1 if !$part->{isFormatted} || isSwap($part);
-
-    $non_defaults->{supermount} = 1 if member(type2fs($part), 'auto', @auto_fs);
-
-    my $defaults = { reverse %$non_defaults };
-    my %options = map { $_ => '' } keys %$non_defaults;
-    my @unknown;
-    foreach (split(",", $packed_options)) {
-	if ($_ eq 'user') {
-	    $options{$_} = 1 foreach ('user', @$user_implies);
-	} elsif (exists $non_defaults->{$_}) {
-	    $options{$_} = 1;
-	} elsif ($defaults->{$_}) {
-	    $options{$defaults->{$_}} = 0;
-	} elsif (/(.*?=)(.*)/) {
-	    $options{$1} = $2;
-	} else {
-	    push @unknown, $_;
-	}
-    }
-    # merge those, for cleaner help
-    $options{'rsize=8192,wsize=8192'} = delete $options{'rsize=8192'} && delete $options{'wsize=8192'}
-      if exists $options{'rsize=8192'};
-
-    my $unknown = join(",", @unknown);
-    \%options, $unknown;
-}
-
-sub mount_options_pack_ {
-    my ($part, $options, $unknown) = @_;
-
-    my ($non_defaults, $user_implies) = mount_options();
-    my @l;
-
-    if (delete $options->{user}) {
-	push @l, 'user';
-	foreach (@$user_implies) {
-	    if (!delete $options->{$_}) {
-		# overriding
-		$options->{$non_defaults->{$_}} = 1;
-	    }
-	}
-    }
-    push @l, map_each { if_($::b, $::a =~ /=$/ ? "$::a$::b" : $::a) } %$options;
-    push @l, $unknown;
-
-    join(",", uniq(grep { $_ } @l));
-}
-sub mount_options_pack {
-    my ($part, $options, $unknown) = @_;
-    $part->{options} = mount_options_pack_($part, $options, $unknown);
-    MDK::Common::Various::noreturn();
-}
-
-sub mount_options_help {
-    my %help = map { $_ => '' } @_;
-    my %short = map { if_(/(.*?)=/, "$1=" => $_) } keys %help;
-
-    foreach (split(':', $ENV{LANGUAGE}), '') {
-	my $manpage = "/usr/share/man/$_/man8/mount.8.bz2";
-	-e $manpage or next;
-
-	my ($tp, $option);
-	foreach (`bzip2 -dc $manpage`) {
-	    my $prev_tp = $tp;
-	    $tp = /^\.(TP|RE)/;
-	    my ($s) = /^\.B (.*)/;
-	    if ($prev_tp && $s eq '\-o' .. /X^/) {
-		if (my $v = $prev_tp && $s =~ /^[a-z]/i .. $tp) {
-		    if ($v == 1) {
-			$s = $short{$s} || $s;
-			$option = exists $help{$s} && !$help{$s} ? $s : '';
-		    } elsif ($v !~ 'E0') {
-			s/\\//g;
-			s/\s*"(.*?)"\s*/$1/g if s/^\.BR\s+//;
-			s/^\.B\s+//;
-			$help{$option} .= $_ if $option;
-		    }
-		}        
-	    }
-	}
-    }
-    %help;
-}
-
-sub set_default_options {
-    my ($part, $is_removable, $useSupermount, $security, $iocharset, $codepage) = @_;
-
-    my ($options, $unknown) = mount_options_unpack($part);
-
-    if ($is_removable) {
-	$options->{supermount} = $useSupermount;
-	$part->{type} = 'auto';	# if supermount, code below will handle choosing the right type
-    }
-
-    my $is_auto = isThisFs('auto', $part);
-
-    if ($part->{media_type} eq 'cdrom') {
-	$options->{ro} = 1;
-    }
-
-    if ($part->{media_type} eq 'fd') {
-	# slow device so don't loose time, write now!
-	$options->{sync} = 1;
-    }
-
-    if (isTrueFS($part)) {
-	#- noatime on laptops (do not wake up the hd)
-	#- Do  not  update  inode  access times on this
-	#- file system (e.g, for faster access  on  the
-	#- news spool to speed up news servers).
-	$options->{noatime} = detect_devices::isLaptop();
-    }
-    if (isThisFs('nfs', $part)) {
-	put_in_hash($options, { 
-			       nosuid => 1, 'rsize=8192,wsize=8192' => 1, soft => 1,
-			      });
-    }
-    if (isFat($part) || $is_auto) {
-
-	put_in_hash($options, {
-			       user => 1, noexec => 0,
-			      }) if !exists $part->{rootDevice}; # partition means no removable media
-
-	put_in_hash($options, {
-			       'umask=0' => $security < 3, 'iocharset=' => $iocharset, 'codepage=' => $codepage,
-			      });
-    }
-    if (isThisFs('ntfs', $part) || $is_auto) {
-	put_in_hash($options, { 'iocharset=' => $iocharset });
-    }
-    if (isThisFs('iso9660', $part) || $is_auto) {
-	put_in_hash($options, { user => 1, noexec => 0, 'iocharset=' => $iocharset });
-    }
-    if (isThisFs('reiserfs', $part)) {
-	$options->{notail} = 1;
-    }
-    if (isLoopback($part) && !isSwap($part)) { #- no need for loop option for swap files
-	$options->{loop} = 1;
-    }
-
-    # rationalize: no need for user
-    if ($options->{autofs} || $options->{supermount}) {
-	$options->{user} = 0;
-    }
-
-    # have noauto when we have user
-    $options->{noauto} = 1 if $options->{user}; 
-
-    if ($options->{user}) {
-	# ensure security  (user_implies - noexec as noexec is not a security matter)
-	$options->{$_} = 1 foreach 'nodev', 'nosuid';
-    }
-
-    mount_options_pack($part, $options, $unknown);
-}
-
-sub set_all_default_options {
-    my ($all_hds, $useSupermount, $security, $iocharset, $codepage) = @_;
-
-    my @removables = @{$all_hds->{raw_hds}};
-
-    foreach my $part (fsedit::get_really_all_fstab($all_hds)) {
-	set_default_options($part, member($part, @removables), $useSupermount, $security, $iocharset, $codepage);
-    }
-}
-
-sub set_removable_mntpoints {
-    my ($all_hds) = @_;
-
-    my %names;
-    foreach (@{$all_hds->{raw_hds}}) {
-	my $name = $_->{media_type};
-	if (member($name, 'hd', 'fd')) {
-	    if (detect_devices::isZipDrive($_)) {
-		$name = 'zip';
-	    } elsif ($name eq 'fd') {
-		$name = 'floppy';
-	    } else {
-		log::l("set_removable_mntpoints: don't know what to with hd $_->{device}");
-		next;
-	    }
-	}
-	if ($name) {
-	    my $s = ++$names{$name};
-	    $_->{mntpoint} ||= "/mnt/$name" . ($s == 1 ? '' : $s);
-	}
-    }
-}
-
-sub get_raw_hds {
-    my ($prefix, $all_hds) = @_;
-
-    $all_hds->{raw_hds} = 
-      [ 
-       detect_devices::floppies(), 
-       detect_devices::cdroms__faking_ide_scsi(), 
-       detect_devices::zips__faking_ide_scsi(),
-      ];
-    get_major_minor(@{$all_hds->{raw_hds}});
-
-    my @fstab = read_fstab($prefix, "/etc/fstab", 'all_options');
-    $all_hds->{nfss} = [ grep { isThisFs('nfs', $_) } @fstab ];
-    $all_hds->{smbs} = [ grep { isThisFs('smbfs', $_) } @fstab ];
-    $all_hds->{special} = [
-       (grep { isThisFs('tmpfs', $_) } @fstab),
-       { device => 'none', mntpoint => '/proc', type => 'proc' },
-       { device => 'none', mntpoint => '/dev/pts', type => 'devpts', options => 'mode=0620' },
-    ];
-}
-
-################################################################################
-# formatting functions
-################################################################################
-sub disable_forced_fsck {
-    my ($dev) = @_;
-    run_program::run("tune2fs", "-c0", "-i0", devices::make($dev));
-}
-
-sub format_ext2($@) {
-    #- mke2fs -b (1024|2048|4096) -c -i(1024 > 262144) -N (1 > 100000000) -m (0-100%) -L volume-label
-    #- tune2fs
-    my ($dev, @options) = @_;
-    $dev =~ m,(rd|ida|cciss)/, and push @options, qw(-b 4096 -R stride=16); #- For RAID only.
-    push @options, qw(-b 1024 -O none) if arch() =~ /alpha/;
-    run_program::run("mke2fs", @options, devices::make($dev)) or die _("%s formatting of %s failed", "ext2", $dev);
-}
-sub format_ext3 {
-    my ($dev, @options) = @_;
-    format_ext2($dev, "-j", @options);
-    disable_forced_fsck($dev);
-}
-sub format_reiserfs {
-    my ($dev, @options) = @_;
-    #TODO add -h tea
-    run_program::run("mkreiserfs", "-ff", @options, devices::make($dev)) or die _("%s formatting of %s failed", "reiserfs", $dev);
-}
-sub format_xfs {
-    my ($dev, @options) = @_;
-    run_program::run("mkfs.xfs", "-f", "-q", @options, devices::make($dev)) or die _("%s formatting of %s failed", "xfs", $dev);
-}
-sub format_jfs {
-    my ($dev, @options) = @_;
-    run_program::run("mkfs.jfs", "-f", @options, devices::make($dev)) or die _("%s formatting of %s failed", "jfs", $dev);
-}
-sub format_dos {
-    my ($dev, @options) = @_;
-    run_program::run("mkdosfs", @options, devices::make($dev)) or die _("%s formatting of %s failed", "dos", $dev);
-}
-sub format_hfs {
-    my ($dev, @options) = @_;
-    run_program::run("hformat", @options, devices::make($dev)) or die _("%s formatting of %s failed", "HFS", $dev);
-}
-sub real_format_part {
-    my ($part) = @_;
-
-    $part->{isFormatted} and return;
-
-    my $dev = $part->{real_device} || $part->{device};
-
-    my @options = $part->{toFormatCheck} ? "-c" : ();
-    log::l("formatting device $dev (type ", type2name($part->{type}), ")");
-
-    if (isExt2($part)) {
-	push @options, "-F" if isLoopback($part);
-	push @options, "-m", "0" if $part->{mntpoint} =~ m|^/home|;
-	format_ext2($dev, @options);
-    } elsif (isThisFs("ext3", $part)) {
-	push @options, "-m", "0" if $part->{mntpoint} =~ m|^/home|;
-        format_ext3($dev, @options);
-    } elsif (isThisFs("reiserfs", $part)) {
-        format_reiserfs($dev, @options, if_(c::kernel_version() =~ /^\Q2.2/, "-v", "1"));
-    } elsif (isThisFs("xfs", $part)) {
-        format_xfs($dev, @options);
-    } elsif (isThisFs("jfs", $part)) {
-        format_jfs($dev, @options);
-    } elsif (isDos($part)) {
-        format_dos($dev, @options);
-    } elsif (isWin($part)) {
-        format_dos($dev, @options, '-F', 32);
-    } elsif (isThisFs('hfs', $part)) {
-        format_hfs($dev, @options, '-l', "Untitled");
-    } elsif (isAppleBootstrap($part)) {
-        format_hfs($dev, @options, '-l', "bootstrap");
-    } elsif (isSwap($part)) {
-	my $check_blocks = grep { /^-c$/ } @options;
-        swap::make($dev, $check_blocks);
-    } else {
-	die _("I don't know how to format %s in type %s", $_->{device}, type2name($_->{type}));
-    }
-    $part->{isFormatted} = 1;
-}
-sub format_part {
-    my ($raids, $part, $prefix) = @_;
-    if (isRAID($part)) {
-	require raid;
-	raid::format_part($raids, $part);
-    } elsif (isLoopback($part)) {
-	loopback::format_part($part, $prefix);
-    } else {
-	real_format_part($part);
-    }
-}
-
-################################################################################
-# mounting functions
-################################################################################
-sub set_loop {
-    my ($part) = @_;
-    if (!$part->{real_device}) {
-	eval { modules::load('loop') };
-	$part->{real_device} = devices::set_loop(devices::make($part->{device}), $part->{encrypt_key}, $part->{options} =~ /encryption=(\w+)/);
-    }
-}
-
-sub formatMount_part {
-    my ($part, $raids, $fstab, $prefix, $callback) = @_;
-
-    if (isLoopback($part)) {
-	formatMount_part($part->{loopback_device}, $raids, $fstab, $prefix, $callback);
-    }
-    if (my $p = up_mount_point($part->{mntpoint}, $fstab)) {
-	formatMount_part($p, $raids, $fstab, $prefix, $callback) unless loopback::carryRootLoopback($part);
-    }
-    if ($part->{encrypt_key}) {
-	set_loop($part);
-    }
-    if ($part->{toFormat}) {
-	$callback->($part) if $callback;
-	format_part($raids, $part, $prefix);
-    }
-    mount_part($part, $prefix);
-}
-
-sub formatMount_all {
-    my ($raids, $fstab, $prefix, $callback) = @_;
-    formatMount_part($_, $raids, $fstab, $prefix, $callback) 
-      foreach sort { isLoopback($a) ? 1 : isSwap($a) ? -1 : 0 } grep { $_->{mntpoint} } @$fstab;
-
-    #- ensure the link is there
-    loopback::carryRootCreateSymlink($_, $prefix) foreach @$fstab;
-
-    #- for fun :)
-    #- that way, when install exits via ctrl-c, it gives hand to partition
-    eval {
-	local $SIG{__DIE__} = 'ignore';
-	my ($type, $major, $minor) = devices::entry(fsedit::get_root($fstab)->{device});
-	output "/proc/sys/kernel/real-root-dev", makedev($major, $minor);
-    };
-}
-
-sub mount {
-    my ($dev, $where, $fs, $rdonly, $options) = @_;
-    log::l("mounting $dev on $where as type $fs, options $options");
-
-    -d $where or mkdir_p($where);
-
-    my @fs_modules = qw(vfat hfs romfs ufs reiserfs xfs jfs ext3);
-
-    if (member($fs, 'smb', 'smbfs', 'nfs', 'ntfs') && $::isStandalone) {
-	system('mount', '-t', $fs, $dev, $where, '-o', $options) == 0 or die _("mounting partition %s in directory %s failed", $dev, $where);
-	return; #- do not update mtab, already done by mount(8)
-    } elsif (member($fs, 'ext2', 'proc', 'usbdevfs', 'iso9660', @fs_modules)) {
-	$dev = devices::make($dev) if $fs ne 'proc' && $fs ne 'usbdevfs';
-	$where =~ s|/$||;
-
-	my $flag = c::MS_MGC_VAL();
-	$flag |= c::MS_RDONLY() if $rdonly;
-	my $mount_opt = "";
-
-	if ($fs eq 'vfat') {
-	    $mount_opt = 'check=relaxed';
-	} elsif ($fs eq 'reiserfs') {
-	    #- could be better if we knew if there is a /boot or not
-	    #- without knowing it, / is forced to be mounted with notail
-	    # if $where =~ m|/(boot)?$|;
-	    $mount_opt = 'notail'; #- notail in any case
-	} elsif ($fs eq 'ext2') {
-	    run_program::run("fsck.ext2", "-a", $dev);
-	    $? & 0x0100 and log::l("fsck corrected partition $dev");
-	    $? & 0xfeff and die _("fsck failed with exit code %d or signal %d", $? >> 8, $? & 255);
-	}
-	if (member($fs, @fs_modules)) {
-	    eval { modules::load($fs) };
-	} elsif ($fs eq 'iso9660') {
-	    eval { modules::load('isofs') };
-	}
-	if ($fs eq 'ext3' && $::isInstall) {
-	    # ext3 mount to use the journal
-	    syscall_('mount', $dev, $where, $fs, $flag, $mount_opt) or die _("mounting partition %s in directory %s failed", $dev, $where) . " ($!)";
-	    syscall_('umount', $where);
-	    # really mount as ext2 during install for speed up
-	    $fs = 'ext2';
-	}
-	log::l("calling mount($dev, $where, $fs, $flag, $mount_opt)");
-	syscall_('mount', $dev, $where, $fs, $flag, $mount_opt) or die _("mounting partition %s in directory %s failed", $dev, $where) . " ($!)";
-    } else {
-	log::l("skipping mounting $fs partition");
-	return;
-    }
-    local *F;
-    open F, ">>/etc/mtab" or return; #- fail silently, /etc must be read-only
-    print F "$dev $where $fs defaults 0 0\n";
-}
-
-#- takes the mount point to umount (can also be the device)
-sub umount {
-    my ($mntpoint) = @_;
-    $mntpoint =~ s|/$||;
-    log::l("calling umount($mntpoint)");
-    syscall_('umount', $mntpoint) or die _("error unmounting %s: %s", $mntpoint, "$!");
-
-    substInFile { $_ = '' if /(^|\s)$mntpoint\s/ } '/etc/mtab'; #- don't care about error, if we can't read, we won't manage to write... (and mess mtab)
-}
-
-sub mount_part {
-    my ($part, $prefix, $rdonly) = @_;
-
-    #- root carrier's link can't be mounted
-    loopback::carryRootCreateSymlink($part, $prefix);
-
-    log::l("isMounted=$part->{isMounted}, real_mntpoint=$part->{real_mntpoint}, mntpoint=$part->{mntpoint}");
-    if ($part->{isMounted} && $part->{real_mntpoint} && $part->{mntpoint}) {
-	log::l("remounting partition on $prefix$part->{mntpoint} instead of $part->{real_mntpoint}");
-	if ($::isInstall) { #- ensure partition will not be busy.
-	    require install_any;
-	    install_any::getFile('XXX');
-	}
-	eval {
-	    umount($part->{real_mntpoint});
-	    rmdir $part->{real_mntpoint};
-	    symlinkf "$prefix$part->{mntpoint}", $part->{real_mntpoint};
-	    delete $part->{real_mntpoint};
-	    $part->{isMounted} = 0;
-	};
-    }
-
-    return if $part->{isMounted};
-
-    unless ($::testing) {
-	if (isSwap($part)) {
-	    swap::swapon($part->{device});
-	} else {
-	    $part->{mntpoint} or die "missing mount point for partition $part->{device}";
-
-	    my $mntpoint = ($prefix || '') . $part->{mntpoint};
-	    if (isLoopback($part) || $part->{encrypt_key}) {
-		set_loop($part);
-	    } elsif (loopback::carryRootLoopback($part)) {
-		$mntpoint = "/initrd/loopfs";
-	    }
-	    my $dev = $part->{real_device} || $part->{device};
-	    mount($dev, $mntpoint, type2fs($part), $rdonly, $part->{options});
-	    rmdir "$mntpoint/lost+found";
-	}
-    }
-    $part->{isMounted} = $part->{isFormatted} = 1; #- assume that if mount works, partition is formatted
-}
-
-sub umount_part {
-    my ($part, $prefix) = @_;
-
-    $part->{isMounted} || $part->{real_mntpoint} or return;
-
-    unless ($::testing) {
-	if (isSwap($part)) {
-	    swap::swapoff($part->{device});
-	} elsif (loopback::carryRootLoopback($part)) {
-	    umount("/initrd/loopfs");
-	} else {
-	    umount(($prefix || '') . $part->{mntpoint} || devices::make($part->{device}));
-	    devices::del_loop(delete $part->{real_device}) if $part->{real_device};
-	}
-    }
-    $part->{isMounted} = 0;
-}
-
-sub mount_all($;$$) {
-    my ($fstab, $prefix) = @_;
-
-    #- TODO fsck, create check_mount_all ?
-    log::l("mounting all filesystems");
-
-    #- order mount by alphabetical ordre, that way / < /home < /home/httpd...
-    foreach (sort { $a->{mntpoint} cmp $b->{mntpoint} } grep { isSwap($_) || $_->{mntpoint} && isTrueFS($_) } @$fstab) {
-	mount_part($_, $prefix);
-    }
-}
-
-sub umount_all($;$) {
-    my ($fstab, $prefix) = @_;
-
-    log::l("unmounting all filesystems");
-
-    foreach (sort { $b->{mntpoint} cmp $a->{mntpoint} } @$fstab) {
-	$_->{mntpoint} and umount_part($_, $prefix);
-    }
-}
-
-################################################################################
-# various functions
-################################################################################
-sub df {
-    my ($part, $prefix) = @_;
-    my $dir = "/tmp/tmp_fs_df";
-
-    return $part->{free} if exists $part->{free};
-
-    if ($part->{isMounted}) {
-	$dir = ($prefix || '') . $part->{mntpoint};
-    } elsif ($part->{notFormatted} && !$part->{isFormatted}) {
-	return; #- won't even try!
-    } else {
-	mkdir $dir;
-	eval { mount($part->{device}, $dir, type2fs($part), 'readonly') };
-	if ($@) {
-	    $part->{notFormatted} = 1;
-	    $part->{isFormatted} = 0;
-	    unlink $dir;
-	    return;
-	}
-    }
-    my (undef, $free) = MDK::Common::System::df($dir);
-
-    if (!$part->{isMounted}) {
-	umount($dir);
-	unlink($dir)
-    }
-
-    $part->{free} = 2 * $free if defined $free;
-    $part->{free};
-}
-
-sub up_mount_point {
-    my ($mntpoint, $fstab) = @_;
-    while (1) {
-	$mntpoint = dirname($mntpoint);
-	$mntpoint ne "." or return;
-	$_->{mntpoint} eq $mntpoint and return $_ foreach @$fstab;
-    }
-}
-
-1;
diff --git a/perl-install/fsedit.pm b/perl-install/fsedit.pm
deleted file mode 100644
index 5b700d387..000000000
--- a/perl-install/fsedit.pm
+++ /dev/null
@@ -1,741 +0,0 @@
-package fsedit; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(%suggestions);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use detect_devices;
-use fsedit;
-use devices;
-use loopback;
-use log;
-use fs;
-
-%suggestions = (
-  __("simple") => [
-    { mntpoint => "/",     size => 300 << 11, type =>0x483, ratio => 5, maxsize =>3500 << 11 },
-    { mntpoint => "swap",  size =>  64 << 11, type => 0x82, ratio => 1, maxsize => 250 << 11 },
-    { mntpoint => "/home", size => 300 << 11, type =>0x483, ratio => 3 },
-  ], __("with /usr") => [
-    { mntpoint => "/",     size => 150 << 11, type =>0x483, ratio => 1, maxsize => 500 << 11 },
-    { mntpoint => "swap",  size =>  64 << 11, type => 0x82, ratio => 1, maxsize => 250 << 11 },
-    { mntpoint => "/usr",  size => 300 << 11, type =>0x483, ratio => 4, maxsize =>3000 << 11 },
-    { mntpoint => "/home", size => 100 << 11, type =>0x483, ratio => 5 },
-  ], __("server") => [
-    { mntpoint => "/",     size => 150 << 11, type =>0x483, ratio => 1, maxsize => 250 << 11 },
-    { mntpoint => "swap",  size =>  64 << 11, type => 0x82, ratio => 2, maxsize => 400 << 11 },
-    { mntpoint => "/usr",  size => 300 << 11, type =>0x483, ratio => 3, maxsize =>3000 << 11 },
-    { mntpoint => "/var",  size => 100 << 11, type =>0x483, ratio => 4 },
-    { mntpoint => "/home", size => 100 << 11, type =>0x483, ratio => 5 },
-  ],
-);
-foreach (values %suggestions) {
-    if (arch() =~ /ia64/) {
-	@$_ = ({ mntpoint => "/boot/efi", size => 50 << 11, type => 0xb, ratio => 1, maxsize => 150 << 11 }, @$_);
-    }
-}
-
-my @suggestions_mntpoints = (
-    "/var/ftp", "/var/www", "/boot", '/tmp',
-    arch() =~ /sparc/ ? "/mnt/sunos" : arch() =~ /ppc/ ? "/mnt/macos" : "/mnt/windows",
-    #- RedHat also has /usr/local and /opt
-);
-
-my @partitions_signatures = (
-    [ 0x8e, 0, "HM\1\0" ],
-    [ 0x83, 0x438, "\x53\xEF" ],
-    [ 0x183, 0x10034, "ReIsErFs" ],
-    [ 0x183, 0x10034, "ReIsEr2Fs" ],
-    [ 0x283, 0, 'XFSB', 0x200, 'XAGF', 0x400, 'XAGI' ],
-    [ 0x383, 0x8000, 'JFS1' ],
-    [ 0x82, 4086, "SWAP-SPACE" ],
-    [ 0x82, 4086, "SWAPSPACE2" ],
-    [ 0x7,  0x1FE, "\x55\xAA", 0x3, "NTFS" ],
-    [ 0xc,  0x1FE, "\x55\xAA", 0x52, "FAT32" ],
-arch() !~ /^sparc/ ? (
-    [ 0x6,  0x1FE, "\x55\xAA", 0x36, "FAT" ],
-) : (),
-);
-
-sub typeOfPart { 
-    my $dev = devices::make($_[0]);
-    my $t = typeFromMagic($dev, @partitions_signatures);
-    if ($t == 0x83) {
-	#- there is no magic to differentiate ext3 and ext2. Using libext2fs
-	#- to check if it has a journal
-	$t = 0x483 if c::is_ext3($dev);
-    }
-    $t;
-}
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub empty_all_hds {
-    { hds => [], lvms => [], raids => [], loopbacks => [], raw_hds => [], nfss => [], smbs => [], special => [] };
-}
-sub recompute_loopbacks {
-    my ($all_hds) = @_;
-    my @fstab = get_all_fstab($all_hds);
-    @{$all_hds->{loopbacks}} = map { isPartOfLoopback($_) ? @{$_->{loopback}} : () } @fstab;
-}
-
-sub raids {
-    my ($hds) = @_;
-
-    my @parts = get_fstab(@$hds);
-    {
-	my @l = grep { isRawRAID($_) } @parts or return [];
-	detect_devices::raidAutoStart(@l);
-    }
-
-    fs::get_major_minor(@parts);
-    my %devname2part = map { $_->{dev} => { %$_, device => $_->{dev} } } read_partitions();
-
-    my @raids;
-    my @mdstat = cat_("/proc/mdstat");
-    for (my $i = 0; $i < @mdstat; $i++) {
-
-	my ($nb, $level, $mdparts) = 
-	  #- line format is:
-	  #- md%d : {in}?active{ (read-only)}? {linear|raid1|raid4|raid5}{ DEVNAME[%d]{(F)}?}*
-	  $mdstat[$i] =~ /^md(.).* ([^ \[\]]+) (\S+\[\d+\].*)/ or next;
-
-	$level =~ s/raid//; #- { linear | raid0 | raid1 | raid5 } -> { linear | 0 | 1 | 5 }
-
-	my $chunks = $mdstat[$i+1] =~ /(\S+) chunks/ ? $1 : "64k";
-
-	my @raw_mdparts = map { /([^\[]+)/ } split ' ', $mdparts;
-	my @mdparts = 
-	  map { 
-	      my $mdpart = $devname2part{$_} || { device => $_ };
-	      if (my ($part) = grep { is_same_hd($mdpart, $_) } @parts) {
-		  $part->{raid} = $nb;
-		  delete $part->{mntpoint};
-		  $part;
-	      } else {
-		  #- forget it when not found? that way it won't break much... beurk.
-		  ();
-	      }
-	  } @raw_mdparts;
-
-	my $type = typeOfPart("md$nb");
-	log::l("RAID: found md$nb (raid $level) chunks $chunks ", if_($type, "type $type "), "with parts ", join(", ", @raw_mdparts));
-	$raids[$nb] = { 'chunk-size' => $chunks, type => $type || 0x83, disks => \@mdparts,
-			device => "md$nb", notFormatted => !$type, level => $level };
-    }
-    require raid;
-    raid::update(@raids);
-    \@raids;
-}
-
-sub hds {
-    my ($drives, $flags) = @_;
-    my (@hds);
-    my $rc;
-
-    foreach (@$drives) {
-	my $file = devices::make($_->{device});
-
-	my $hd = partition_table_raw::get_geometry($file) or log::l("An error occurred while getting the geometry of block device $file: $!"), next;
-	add2hash_($hd, $_);
-	$hd->{file} = $file;
-	$hd->{prefix} = $hd->{device};
-	# for RAID arrays of format c0d0p1
-	$hd->{prefix} .= "p" if $hd->{prefix} =~ m,(rd|ida|cciss|ataraid)/,;
-
-	eval { partition_table::read($hd, $flags->{clearall} || member($_->{device}, @{$flags->{clear} || []})) };
-	if ($@) {
-	    cdie "ask_before_blanking:$@";
-	    partition_table_raw::zero_MBR($hd);
-	}
-	member($_->{device}, @{$flags->{clear} || []}) and partition_table::remove($hd, $_)
-	  foreach partition_table::get_normal_parts($hd);
-
-	# special case for Various type
-	$_->{type} = typeOfPart($_->{device}) || 0x100 foreach grep { $_->{type} == 0x100 } partition_table::get_normal_parts($hd);
-
-	#- special case for type overloading (eg: reiserfs is 0x183)
-	foreach (grep { isExt2($_) } partition_table::get_normal_parts($hd)) {
-	    my $type = typeOfPart($_->{device});
-	    $_->{type} = $type if $type > 0x100 || $type && $hd->isa('partition_table_gpt');
-	}
-	push @hds, $hd;
-    }
-    #- detect raids before LVM allowing LVM on raid
-    my $raids = raids(\@hds);
-    my $all_hds = { %{ empty_all_hds() }, hds => \@hds, lvms => [], raids => $raids };
-
-    my @lvms;
-    if (my @pvs = grep { isRawLVM($_) } get_all_fstab($all_hds)) {
-	#- otherwise vgscan won't find them
-	devices::make($_->{device}) foreach @pvs; 
-	require lvm;
-	foreach (@pvs) {
-	    my $name = lvm::get_vg($_) or next;
-	    my ($lvm) = grep { $_->{LVMname} eq $name } @lvms;
-	    if (!$lvm) {
-		$lvm = bless { disks => [], LVMname => $name }, 'lvm';
-		lvm::update_size($lvm);
-		lvm::get_lvs($lvm);
-		push @lvms, $lvm;
-	    }
-	    $_->{lvm} = $name;
-	    push @{$lvm->{disks}}, $_;
-	}
-    }
-    $all_hds->{lvms} = \@lvms;
-
-    fs::get_major_minor(get_all_fstab($all_hds));
-
-    $all_hds;
-}
-
-
-sub read_partitions() {
-    my (undef, undef, @all) = cat_("/proc/partitions");
-    grep {
-	$_->{size} != 1 &&	 # skip main extended partition
-	$_->{size} != 0x3fffffff # skip cdroms (otherwise stops cd-audios)
-    } map { 
-	my %l; 
-	@l{qw(major minor size dev)} = split; 
-	\%l;
-    } @all;
-}
-
-sub readProcPartitions {
-    my ($hds) = @_;
-
-    my @all = read_partitions();
-    my @parts = grep { $_->{dev} =~ /\d$/ } @all;
-    my @disks = grep { $_->{dev} !~ /\d$/ } @all;
-
-    my $devfs_like = grep { $_->{dev} =~ m|/disc$| } @disks;
-
-    my %devfs2normal = map {
-	my (undef, $major, $minor) = devices::entry($_->{device});
-	my ($disk) = grep { $_->{major} == $major && $_->{minor} == $minor } @disks;
-	$disk->{dev} => $_->{device};
-    } @$hds;
-
-    foreach my $part (@parts) {
-	my $dev;
-	if ($devfs_like) {
-	    $dev = -e "/dev/$part->{dev}" ? $part->{dev} : sprintf("0x%x%02x", $part->{major}, $part->{minor});
-	    $part->{rootDevice} = $devfs2normal{dirname($part->{dev}) . '/disc'};
-	} else {
-	    $dev = $part->{dev};
-	    foreach my $hd (@$hds) {
-		$part->{rootDevice} = $hd->{device} if $part->{dev} =~ /^$hd->{device}./;
-	    }
-	}
-	$part->{device} = $dev;
-	$part->{start} = 0;	# unknown, but we don't care
-	$part->{size} *= 2;	# from KB to sectors
-	$part->{type} = typeOfPart($dev); 
-
-	delete $part->{dev}; # cleanup
-    }
-    @parts;
-}
-
-sub all_hds {
-    my ($all_hds) = @_;
-    (@{$all_hds->{hds}}, @{$all_hds->{lvms}});
-}
-sub part2hd {
-    my ($part, $all_hds) = @_;
-    my ($hd) = grep { $part->{rootDevice} eq $_->{device} } all_hds($all_hds);
-    $hd;
-}
-
-sub is_same_hd {
-    my ($hd1, $hd2) = @_;
-    if ($hd1->{major} && $hd2->{major}) {
-	$hd1->{major} == $hd2->{major} && $hd1->{minor} == $hd2->{minor};
-    } else {
-	$hd1->{device} eq $hd2->{device};
-    }
-}
-
-sub is_same_part {
-    my ($part1, $part2) = @_;
-    foreach ('start', 'size', 'type', 'rootDevice') {
-	$part1->{$_} eq $part2->{$_} or return;
-    }
-    1;
-}
-
-#- get all normal partition including special ones as found on sparc.
-sub get_fstab {
-    map { partition_table::get_normal_parts($_) } @_;
-}
-
-#- get normal partition that should be visible for working on.
-sub get_visible_fstab {
-    grep { $_ && !partition_table::isWholedisk($_) && !partition_table::isHiddenMacPart($_) }
-      map { partition_table::get_normal_parts($_) } @_;
-}
-
-sub get_fstab_and_holes {
-    map {
-	if (isLVM($_)) {
-	    my @parts = partition_table::get_normal_parts($_);
-	    my $free = $_->{totalsectors} - sum map { $_->{size} } @parts;
-	    my $free_part = { start => 0, size => $free, type => 0, rootDevice => $_->{device} };
-	    @parts, if_($free >= $_->cylinder_size, $free_part);
-	} else {
-	    partition_table::get_normal_parts_and_holes($_);
-	}
-    } @_;
-}
-sub get_holes {
-    grep { $_->{type} == 0 } get_fstab_and_holes(@_);
-}
-
-sub get_all_fstab {
-    my ($all_hds) = @_;
-    my @parts = map { partition_table::get_normal_parts($_) } all_hds($all_hds);
-    my @raids = grep {$_} @{$all_hds->{raids}};
-    @parts, @raids, @{$all_hds->{loopbacks}};
-}
-sub get_really_all_fstab {
-    my ($all_hds) = @_;
-    my @parts = map { partition_table::get_normal_parts($_) } all_hds($all_hds);
-    my @raids = grep {$_} @{$all_hds->{raids}};
-    @parts, @raids, @{$all_hds->{loopbacks}}, @{$all_hds->{raw_hds}}, @{$all_hds->{nfss}}, @{$all_hds->{smbs}};
-}
-sub get_all_fstab_and_holes {
-    my ($all_hds) = @_;
-    my @raids = grep {$_} @{$all_hds->{raids}};
-    get_fstab_and_holes(all_hds($all_hds)), @raids, @{$all_hds->{loopbacks}};
-}
-sub get_all_holes {
-    my ($all_hds) = @_;
-    grep { $_->{type} == 0 } get_all_fstab_and_holes($all_hds);
-}
-
-sub all_free_space {
-    my ($all_hds) = @_;
-    sum map { $_->{size} } get_all_holes($all_hds);
-}
-sub free_space {
-    sum map { $_->{size} } get_holes(@_);
-}
-
-sub is_one_big_fat {
-    my ($hds) = @_;
-    @$hds == 1 or return;
-
-    my @l = get_fstab(@$hds);
-    @l == 1 && isFat($l[0]) && free_space(@$hds) < 10 << 11;
-}
-
-sub file2part {
-    my ($prefix, $fstab, $file, $keep_simple_symlinks) = @_;    
-    my $part;
-
-    $file = $keep_simple_symlinks ? common::expand_symlinks_but_simple("$prefix$file") : expand_symlinks("$prefix$file");
-    unless ($file =~ s/^$prefix//) {
-	my ($part) = grep { loopback::carryRootLoopback($_) } @$fstab or die;
-	log::l("found $part->{mntpoint}");
-	$file =~ s|/initrd/loopfs|$part->{mntpoint}|;
-    }
-    foreach (@$fstab) {
-	my $m = $_->{mntpoint};
-	$part = $_ if 
-	  $file =~ /^\Q$m/ && 
-	    (!$part || length $part->{mntpoint} < length $m);
-    }
-    $part or die "file2part: not found $file";
-    $file =~ s|$part->{mntpoint}/?|/|;
-    ($part, $file);
-}
-
-
-sub computeSize {
-    my ($part, $best, $all_hds, $suggestions) = @_;
-    my $max = $part->{maxsize} || $part->{size};
-    return min($max, $best->{size}) unless $best->{ratio};
-
-    my $free_space = all_free_space($all_hds);
-    my @l = my @L = grep { 
-	if (!has_mntpoint($_->{mntpoint}, $all_hds) && $free_space >= $_->{size}) {
-	    $free_space -= $_->{size};
-	    1;
-	} else { 0 } } @$suggestions;
-
-    my $tot_ratios = 0;
-    while (1) {
-	my $old_free_space = $free_space;
-	my $old_tot_ratios = $tot_ratios;
-
-	$tot_ratios = sum(map { $_->{ratio} } @l);
-	last if $tot_ratios == $old_tot_ratios;
-
-	@l = grep { 
-	    if ($_->{ratio} && $_->{maxsize} && $tot_ratios &&
-		$_->{size} + $_->{ratio} / $tot_ratios * $old_free_space >= $_->{maxsize}) {
-		return min($max, $best->{maxsize}) if $best->{mntpoint} eq $_->{mntpoint};
-		$free_space -= $_->{maxsize} - $_->{size};
-		0;
-	    } else {
-		$_->{ratio};
-	    } 
-	} @l;
-    }
-    my $size = int min($max, $best->{size} + $free_space * ($tot_ratios && $best->{ratio} / $tot_ratios));
-    #- verify other entry can fill the hole
-    if (grep { $_->{size} < $max - $size } @L) { $size } else { $max }
-}
-
-sub suggest_part {
-    my ($part, $all_hds, $suggestions) = @_;
-    $suggestions ||= $suggestions{server} || $suggestions{simple};
-
-    my $has_swap = grep { isSwap($_) } get_all_fstab($all_hds);
-
-    my ($best, $second) =
-      grep { !$_->{maxsize} || $part->{size} <= $_->{maxsize} }
-      grep { $_->{size} <= ($part->{maxsize} || $part->{size}) }
-      grep { !has_mntpoint($_->{mntpoint}, $all_hds) || isSwap($_) && !$has_swap }
-      grep { !$_->{hd} || $_->{hd} eq $part->{rootDevice} }
-      grep { !$part->{type} || $part->{type} == $_->{type} || isTrueFS($part) && isTrueFS($_) }
-	@$suggestions or return;
-
-#-    if (arch() =~ /i.86/) {
-#-	  $best = $second if
-#-	    $best->{mntpoint} eq '/boot' &&
-#-	    $part->{start} + $best->{size} > 1024 * $hd->cylinder_size(); #- if the empty slot is beyond the 1024th cylinder, no use having /boot
-#-    }
-
-    defined $best or return; #- sorry no suggestion :(
-
-    $part->{mntpoint} = $best->{mntpoint};
-    $part->{type} = $best->{type} if !(isTrueFS($best) && isTrueFS($part));
-    $part->{size} = computeSize($part, $best, $all_hds, $suggestions);
-    $part->{options} = $best->{options} if $best->{options};
-    1;
-}
-
-sub suggestions_mntpoint {
-    my ($all_hds) = @_;
-    sort grep { !/swap/ && !has_mntpoint($_, $all_hds) }
-      (@suggestions_mntpoints, map { $_->{mntpoint} } @{$suggestions{server} || $suggestions{simple}});
-}
-
-#-sub partitionDrives {
-#-
-#-    my $cmd = "/sbin/fdisk";
-#-    -x $cmd or $cmd = "/usr/bin/fdisk";
-#-
-#-    my $drives = findDrivesPresent() or die "You don't have any hard drives available! You probably forgot to configure a SCSI controller.";
-#-
-#-    foreach (@$drives) {
-#-	 my $text = "/dev/" . $_->{device};
-#-	 $text .= " - SCSI ID " . $_->{id} if $_->{device} =~ /^sd/;
-#-	 $text .= " - Model " . $_->{info};
-#-	 $text .= " array" if $_->{device} =~ /^c.d/;
-#-
-#-	 #- truncate at 50 columns for now
-#-	 $text = substr $text, 0, 50;
-#-    }
-#-    #-TODO TODO
-#-}
-
-
-sub mntpoint2part {
-    my ($mntpoint, $fstab) = @_;
-    first(grep { $mntpoint eq $_->{mntpoint} } @$fstab);
-}
-sub has_mntpoint {
-    my ($mntpoint, $all_hds) = @_;
-    mntpoint2part($mntpoint, [ get_really_all_fstab($all_hds) ]);
-}
-sub get_root_ {
-    my ($fstab, $boot) = @_;
-    $boot && mntpoint2part("/boot", $fstab) || mntpoint2part("/", $fstab);
-}
-sub get_root { &get_root_ || {} }
-
-#- do this before modifying $part->{type}
-sub check_type {
-    my ($type, $hd, $part) = @_;
-    isThisFs("jfs", { type => $type }) && $part->{size} < 16 << 11 and die _("You can't use JFS for partitions smaller than 16MB");
-    isThisFs("reiserfs", { type => $type }) && $part->{size} < 32 << 11 and die _("You can't use ReiserFS for partitions smaller than 32MB");
-}
-
-sub package_needed_for_partition_type {
-    my ($part) = @_;
-    my %l = (
-	reiserfs => 'reiserfsprogs',
-	xfs => 'xfsprogs',
-        jfs => 'jfsprogs',
-    );
-    $l{type2fs($part)};
-}
-
-#- do this before modifying $part->{mntpoint}
-#- $part->{mntpoint} should not be used here, use $mntpoint instead
-sub check_mntpoint {
-    my ($mntpoint, $hd, $part, $all_hds) = @_;
-
-    $mntpoint eq '' || isSwap($part) || isNonMountable($part) and return;
-    $mntpoint =~ m|^/| or die _("Mount points must begin with a leading /");
-    $mntpoint ne $part->{mntpoint} && has_mntpoint($mntpoint, $all_hds) and die _("There is already a partition with mount point %s\n", $mntpoint);
-
-    die "raid / with no /boot" 
-      if $mntpoint eq "/" && isRAID($part) && !has_mntpoint("/boot", $all_hds);
-    die _("You can't use a LVM Logical Volume for mount point %s", $mntpoint)
-      if ($mntpoint eq '/' || $mntpoint eq '/boot') && isLVM($hd);
-    die _("This directory should remain within the root filesystem")
-      if member($mntpoint, qw(/bin /dev /etc /lib /sbin /root /mnt));
-    die _("You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point\n")
-      if !isTrueFS($part) && member($mntpoint, qw(/ /home /tmp /usr /var));
-    die _("You can't use an encrypted file system for mount point %s", $mntpoint)
-      if $part->{options} =~ /encrypted/ && member($mntpoint, qw(/ /usr /var));
-
-    local $part->{mntpoint} = $mntpoint;
-    loopback::check_circular_mounts($hd, $part, $all_hds);
-}
-
-sub check {
-    my ($hd, $part, $all_hds) = @_;
-    check_mntpoint($part->{mntpoint}, $hd, $part, $all_hds);
-    check_type($part->{type}, $hd, $part);
-}
-
-sub add {
-    my ($hd, $part, $all_hds, $options) = @_;
-
-    isSwap($part) ?
-      ($part->{mntpoint} = 'swap') :
-      $options->{force} || check_mntpoint($part->{mntpoint}, $hd, $part, $all_hds);
-
-    delete $part->{maxsize};
-
-    if (isLVM($hd)) {
-	lvm::lv_create($hd, $part);
-    } else {
-	partition_table::add($hd, $part, $options->{primaryOrExtended});
-    }
-}
-
-sub allocatePartitions {
-    my ($all_hds, $to_add) = @_;
-
-    foreach my $part (get_all_holes($all_hds)) {
-	my ($start, $size, $dev) = @$part{"start", "size", "rootDevice"};
-	my $part;
-	while (suggest_part($part = { start => $start, size => 0, maxsize => $size, rootDevice => $dev }, 
-			    $all_hds, $to_add)) {
-	    my ($hd) = fsedit::part2hd($part, $all_hds);
-	    add($hd, $part, $all_hds);
-	    $size -= $part->{size} + $part->{start} - $start;
-	    $start = $part->{start} + $part->{size};
-	}
-    }
-}
-
-sub auto_allocate {
-    my ($all_hds, $suggestions) = @_;
-    my $before = listlength(fsedit::get_all_fstab($all_hds));
-
-    my $suggestions_ = $suggestions || $suggestions{simple};
-    allocatePartitions($all_hds, $suggestions_);
-    auto_allocate_raids($all_hds, $suggestions) if $suggestions;
-
-    partition_table::assign_device_numbers($_) foreach @{$all_hds->{hds}};
-
-    if ($before == listlength(fsedit::get_all_fstab($all_hds))) {
-	# find out why auto_allocate failed
-	if (my @l = grep { !has_mntpoint($_->{mntpoint}, $all_hds) } @$suggestions_) {
-	    die _("Not enough free space for auto-allocating");
-	} else {
-	    die _("Nothing to do");
-	}
-    }
-}
-
-sub auto_allocate_raids {
-    my ($all_hds, $suggestions) = @_;
-
-    my @raids = grep { isRawRAID($_) } get_all_fstab($all_hds) or return;
-    if (@raids) {
-	require raid;
-	my @mds = grep { $_->{hd} =~ /md/ } @$suggestions;
-	foreach my $md (@mds) {
-	    my @raids_ = grep { !$md->{parts} || $md->{parts} =~ /\Q$_->{mntpoint}/ } @raids;
-	    @raids = difference2(\@raids, \@raids_);
-	    my $nb = raid::new($all_hds->{raids}, @raids_);
-	    my $part = $all_hds->{raids}[$nb];
-
-	    my %h = %$md;
-	    delete @h{'hd', 'parts'};
-	    put_in_hash($part, \%h); # mntpoint, level, chunk-size, type
-	    raid::updateSize($part);
-	}
-    }
-}
-
-sub undo_prepare {
-    my ($all_hds) = @_;
-    require Data::Dumper;
-    $Data::Dumper::Purity = 1;
-    foreach (@{$all_hds->{hds}}) {
-	my @h = @{$_}{@partition_table::fields2save};
-	push @{$_->{undo}}, Data::Dumper->Dump([\@h], ['$h']);
-    }
-}
-sub undo {
-    my ($all_hds) = @_;
-    foreach (@{$all_hds->{hds}}) {
-	my $h; eval pop @{$_->{undo}} || next;
-	@{$_}{@partition_table::fields2save} = @$h;
-
-	$_->{isDirty} = $_->{needKernelReread} = 1 if $_->{hasBeenDirty};
-    }
-    
-}
-
-sub move {
-    my ($hd, $part, $hd2, $sector2) = @_;
-
-    die 'TODO'; # doesn't work for the moment
-    my $part1 = { %$part };
-    my $part2 = { %$part };
-    $part2->{start} = $sector2;
-    $part2->{size} += $hd2->cylinder_size() - 1;
-    partition_table::remove($hd, $part);
-    {
-	local ($part2->{notFormatted}, $part2->{isFormatted}); #- do not allow partition::add to change this
-	partition_table::add($hd2, $part2);
-    }
-
-    return if $part2->{notFormatted} && !$part2->{isFormatted} || $::testing;
-
-    local (*F, *G);
-    sysopen F, $hd->{file}, 0 or die '';
-    sysopen G, $hd2->{file}, 2 or die _("Error opening %s for writing: %s", $hd2->{file}, "$!");
-
-    my $base = $part1->{start};
-    my $base2 = $part2->{start};
-    my $step = 10;
-    if ($hd eq $hd2) {
-	$base == $base2 and return;
-	$step = min($step, abs($base2 - $base));
-
-	if ($base < $base2) {
-	    $base  += $part1->{size} - $step;
-	    $base2 += $part1->{size} - $step;
-	    $step = -$step;
-	}
-    }
-
-    my $f = sub {
-	$base  < 0 and $base2 += -$base,  $base  = 0;
-	$base2 < 0 and $base  += -$base2, $base2 = 0;
-	c::lseek_sector(fileno(F), $base,  0) or die "seeking to sector $base failed on drive $hd->{device}";
-	c::lseek_sector(fileno(G), $base2, 0) or die "seeking to sector $base2 failed on drive $hd2->{device}";
-
-	my $buf;
-	sysread F, $buf, $SECTORSIZE * abs($_[0]) or die '';
-	syswrite G, $buf;
-    };
-
-    for (my $i = 0; $i < $part1->{size} / abs($step); $i++, $base += $step, $base2 += $step) {
-	print "$base $base2\n";
-	&$f($step);
-    }
-    if (my $v = ($part1->{size} % abs($step)) * sign($step)) {
-	$base += $v;
-	$base2 += $v;
-	&$f($v);
-    }
-}
-
-sub change_type {
-    my ($type, $hd, $part) = @_;
-    $type != $part->{type} or return;
-    check_type($type, $hd, $part);
-    $hd->{isDirty} = 1;
-    $part->{mntpoint} = '' if isSwap($part) && $part->{mntpoint} eq "swap";
-    $part->{mntpoint} = '' if isRawLVM({ type => $type }) || isRawRAID({ type => $type });
-    $part->{type} = $type;
-    $part->{notFormatted} = 1;
-    $part->{isFormatted} = 0;    
-}
-
-sub rescuept($) {
-    my ($hd) = @_;
-    my ($ext, @hd);
-
-    my $dev = devices::make($hd->{device});
-    local *F; open F, "rescuept $dev|";
-    local $_;
-    while (<F>) {
-	my ($st, $si, $id) = /start=\s*(\d+),\s*size=\s*(\d+),\s*Id=\s*(\d+)/ or next;
-	my $part = { start => $st, size => $si, type => hex($id) };
-	if (isExtended($part)) {
-	    $ext = $part;
-	} else {
-	    push @hd, $part;
-	}
-    }
-    close F or die "rescuept failed";
-
-    partition_table_raw::zero_MBR($hd);
-    foreach (@hd) {
-	my $b = partition_table::verifyInside($_, $ext);
-	if ($b) {
-	    $_->{start}--;
-	    $_->{size}++;
-	}
-	local $_->{notFormatted};
-
-	partition_table::add($hd, $_, ($b ? 'Extended' : 'Primary'), 1);
-    }
-}
-
-sub verifyHds {
-    my ($hds, $readonly, $ok) = @_;
-
-    if (is_empty_array_ref($hds)) { #- no way
-	die _("An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem");
-    }
-
-    my @parts = readProcPartitions($hds);
-    foreach my $hd (@$hds) {
-	my @l1 = partition_table::get_normal_parts($hd);
-	my @l2 = grep { $_->{rootDevice} eq $hd->{device} } @parts;
-	if (int(@l1) != int(@l2) && arch() ne 'ppc') {
-	    log::l(sprintf
-		   "/proc/partitions doesn't agree with drakx %d != %d:\n%s\n", int(@l1), int(@l2),
-		   "/proc/partitions: " . join(", ", map { "$_->{device} ($_->{rootDevice})" } @parts));
-	    $ok = 0;
-	}
-    }
-
-    if ($readonly && !$ok) {
-	log::l("using /proc/partitions as diskdrake failed :(");
-	foreach my $hd (@$hds) {
-	    partition_table_raw::zero_MBR($hd);
-	    $hd->{primary} = { normal => [ grep { $hd->{device} eq $_->{rootDevice} } @parts ] };
-	}
-	$ok = 1;
-    }
-    $readonly && get_fstab(@$hds) == 0 and die _("You don't have any partitions!");
-    $ok;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/ftp.pm b/perl-install/ftp.pm
deleted file mode 100644
index 20b837b8c..000000000
--- a/perl-install/ftp.pm
+++ /dev/null
@@ -1,84 +0,0 @@
-package ftp; # $Id$
-
-use Net::FTP;
-
-use network;
-use log;
-
-my %hosts;
-
-1;
-
-sub fromEnv() {
-    #- now URLPREFIX is generated from what is given by mdk-stage1 which is only this 4 variables.
-    $ENV{URLPREFIX} = "ftp://" . ($ENV{LOGIN} && ("$ENV{LOGIN}" . ($ENV{PASSWORD} && ":$ENV{PASSWORD}") . '@')) .
-      "$ENV{HOST}/$ENV{PREFIX}";
-    @ENV{qw(HOST PREFIX LOGIN PASSWORD)};
-}
-
-sub new {
-    my ($host, $prefix, $login, $password) = @_;
-    my @l = do { if ($hosts{"$host$prefix"}) {
-	@{$hosts{"$host$prefix"}};
-    } else {
-	my %options = (Passive => 1, Timeout => 60, Port => 21);
-	$options{Firewall} = $ENV{PROXY} if $ENV{PROXY};
-	$options{Port} = $ENV{PROXYPORT} if $ENV{PROXYPORT};
-	unless ($login) {
-	    $login = 'anonymous';
-	    $password = '-drakx@';
-	}
-
-	my $ftp;
-	foreach (1..10) {
-	    $ftp = Net::FTP->new(network::resolv($host), %options) or die;
-	    $ftp && $ftp->login($login, $password) and last;
-
-	    log::l("ftp login failed, sleeping before trying again");
-	    sleep 5 * $_;
-	}
-	$ftp or die "unable to open ftp connection to $host";
-	$ftp->binary;
-	$ftp->cwd($prefix);
-
-	my @l = ($ftp, \ (my $retr = undef));
-	$hosts{"$host$prefix"} = \@l;
-	@l;
-    }};
-    wantarray ? @l : $l[0];
-}
-
-sub getFile {
-    my ($f, @para) = @_;
-    $f eq 'XXX' and rewindGetFile(), return; #- special case to force closing connection.
-    foreach (1..3) {
-	my ($ftp, $retr) = new(@para ? @para : fromEnv);
-	$$retr->close if $$retr;
-	$$retr = $ftp->retr($f) and return $$retr;
-	($ftp->code == 550) and log::l("FTP: 550 file unavailable"), return;
-	rewindGetFile();
-	log::l("ftp get failed, sleeping before trying again");
-	sleep 1;
-    }
-}
-
-#-sub closeFiles() {
-#-    #- close any existing connections
-#-    foreach (values %hosts) {
-#-	  my $retr = $_->[1] if ref $_;
-#-	  $$retr->close if $$retr;
-#-	  undef $$retr;
-#-    }
-#-}
-
-sub rewindGetFile() {
-    #- close any existing connection.
-    foreach (values %hosts) {
-	my ($ftp, $retr) = @{$_ || []};
-	$$retr->close if $$retr;
-	$ftp->close() if $ftp;
-    }
-
-    #- make sure to reconnect to server.
-    %hosts = ();
-}
diff --git a/perl-install/g_auto_install b/perl-install/g_auto_install
deleted file mode 100755
index dd7655ee5..000000000
--- a/perl-install/g_auto_install
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/usr/bin/perl
-
-my $dir = `pwd`;
-chomp $dir;
-$dir .= "/../../..";
-
-#- avoid polluting environment with specific locales.
-delete $ENV{$_} foreach qw(LC_MONETARY LC_CTYPE LC_NUMERIC LC_MESSAGES LC_TIME LC_COLLATE LANGUAGE LANG RPM_INSTALL_LANG);
-
-if ($ENV{DISPLAY}) {
-    system "xset", "+fp", "$dir/usr/X11R6/lib/X11/fonts/";
-    system "xset", "fp", "rehash";
-}
-
-#- perl version of the install, we use directly the version we found,
-#- this means there SHOULD BE no module compiled for an older version of perl
-#- which will be used by DrakX.
-my ($version, $arch) = (glob "$dir/usr/lib/perl5/*/*/CORE/libperl.so")[0] =~ m|$dir/usr/lib/perl5/([^/]*)/([^/]*)/CORE/libperl.so|;
-
-#- keep it mind the ELF loader to use.
-$ENV{LD_LOADER} = "$dir/lib/ld-linux.so.2";
-
-$ENV{LOCPATH}="$dir/usr/share/locale";
-$ENV{GCONV_PATH}="$dir/usr/lib/gconv";
-$ENV{PERL5LIB} = join ":", map { "$dir/usr/lib/perl5/$_" } ("$version/$arch",
-							    "$version",
-							    "site_perl/$version/$arch",
-							    "site_perl/$version",
-							    "site_perl");
-$ENV{LD_LIBRARY_PATH} = "$dir/usr/bin:$dir/bin:$dir/sbin:$dir/usr/sbin:$dir/usr/X11R6/bin:$dir/lib:$dir/usr/lib:$dir/usr/lib/perl5/$version/$arch/CORE";
-$ENV{PATH} = join(":", map { "$dir/$_" } split ":", "/usr/bin:/bin:/sbin:/usr/sbin:/usr/X11R6/bin") . ":$ENV{PATH}";
-$ENV{SHARE_PATH} = "$dir/usr/share";
-$ENV{RPMRC_FILE} = "$dir/usr/lib/rpm/rpmrc";
-$ENV{GTK_DATA_PREFIX} = "$dir/usr";
-$ENV{GTK_EXE_PREFIX} = "$dir/usr";
-$ENV{GDK_IMLIB_PATH} = "$dir/usr/lib";
-
-system $ENV{LD_LOADER}, "../perl", "./install2", "--g_auto_install", @ARGV;
-
-#- at this point, unwind above else they will not run correctly (wrong ld-linux.so.2)
-delete $ENV{GTK_EXE_PREFIX};
-delete $ENV{RPMRC_FILE};
-delete $ENV{LOCPATH};
-delete $ENV{SHARE_PATH};
-delete $ENV{PATH};
-delete $ENV{LD_LIBRARY_PATH};
-delete $ENV{PERL5LIB};
-delete $ENV{LD_LOADER};
-
-if ($ENV{DISPLAY}) {
-    system "xset", "-fp", "$dir/usr/X11R6/lib/X11/fonts/";
-    system "xset", "fp", "rehash";
-}
diff --git a/perl-install/harddrake/TODO b/perl-install/harddrake/TODO
deleted file mode 100644
index a28cd9963..000000000
--- a/perl-install/harddrake/TODO
+++ /dev/null
@@ -1,164 +0,0 @@
--*- outline -*-
-
-* Harddrake TODO:
-** fixes
-*** if no file don't run configurator
-*** don't offer to run configurator if empty hash (aka first boot)
-*** IDE, SCSI: bus => bus_id, bus="IDE/SCSI"
-*** SCSI: get vendor string
-*** timeout on dialogs in service
-*** mouse.pm: only probe serial if :
-**** serial mouse previously detected
-**** no non-serial mouse found
-
-** wishes
-*** move all drakx tools into just a small one-liner that uses real <tool>.pm
-    so that harddrake and mcc reduces their memory usage pattern and
-    be faster (the next fast step will be to use perl6/parrot)
-*** scanner/sound/printer/ ... non needed by X, posponed to X11
-
-** missing
-*** add updfstab
-*** make all drakx tools a simple one-liner that call right module so that
-    harddrake2 and mcc can load these tools without more ram eater
-*** module options configuration button
-*** enable the user to force a module (isa, isapnp, ...)
-*** detect pcimcia:
-  	
-    foreach (detect_devices::pcmcia_probe()) {
-        printf "m: %-15s t: %-20s d: %-12s  d: %s\n",
-              $_->{driver}, $_->{type}, $_->{device}, $_->{description}
-    }
-
-
-** ensure scannerdrake use is ok (=> yvounet)
-
-
-* Postponed
-** use fbgtk+2 when booting on fbcon for smoother GUI
-*** pixel, convert perl-GTK to gtk+2 :-)
-
-** for to send a message for unknown hardware to install@mandrakesoft.com
-*** use drakbugreport ?
-
-    Subject: [UNKNOW HARDWARE] or a new other ml
-        -> do you konw how to configure it under linux ?
-        -> description
-
-
-
-* / no hope / useless :
-** don't die when one icon is missing ?
-** Once we've swtiched to perl-5.8, consider doing:
-    use Storable;
-    retrieve %oldconfig
-    store %config, $previous_conf;
-
-** move som subs into detect_devices.pm
-** enable a string to be passed as detector; in that case, do ourself the =~
-** alter detect_devices in order to only probe one time
-** detect *ALL* mouses if more than one (mousedrake?)
-
-**  in Mandrake 9.0 :
-
-    "Mass storage" => (Floppy,
-				   Disk,
-				   Cdrom,
-				   Tape)
-
-    "Network" => (Ethernetcard,
-			   Modem,
-			   Isdn)
-    "Multimedia" => (Videocard,
-				 Tvcard,
-				 Soundcard,
-				 Webcam)
-    "System" => (Bridge,
-			  Cpu,
-			  Memory)
-
-
-    "Publishing" => (Printer,
-				 Scanner)
-
-    "Pointing" => (Mouse,
-			    Joystick)
-
-    "Buses" => (Ideinterface,
-			 Scsiinterface,
-			 Usbinterface,
-			 );
-
-    "Unknown/Others",
-
-
-* Suggestion
-Subject: Re: [Cooker] Optional ALSA Support for SB Live!
-From: Fabrice FACORAT <f.faber@netcourrier.com>
-To: cooker@linux-mandrake.com
-In-Reply-To: <m2ofhvtpaq.fsf@vador.mandrakesoft.com>
-References: <20020311051222.47DC087CA5@yavin.mandrax.org> 
-	<m2ofhvtpaq.fsf@vador.mandrakesoft.com>
-Date: 11 Mar 2002 11:12:31 +0100
-Message-Id: <1015841551.3895.31.camel@bastard.localdomain>
-
-Le lun 11/03/2002 � 10:41, Thierry Vignaud a �crit :
- 
-> >   In Mandrake 8.1 rerunning Harddrake post-setup would switch over
-> > to ALSA (which supports MIDI synth), however in 8.2 the only way to
-> > get ALSA support is to manually edit the modules.conf file. This
-> > would be disasterous for someone who isn't familar with
-> > modules.conf, but had been instructed on the mandrake-expert/newbie
-> > lists (as many had been) to simply rerun Harddrake on the sound card
-> > to get ALSA (and hence MIDI synth support).
-> 
-> give me the result of lspcidrake -f -v so that i switch your card
-> from oss to alsa.
-
-no please.
-just one month ago you switch SBLive from Alsa to OSS ( cause drakX
-set it as OSS and harddrake as Alsa ).
-There were also a discussion concerning the fact that Alsa doesn't
-support emu-tools and so all available options.
-Last but not least, several peoples report pbs with Alsa ( is sound is
-too high you have disturbances ). So someone is going to ask you for
-OSS as it want to use some features os SBLive, etc ...
-
-To my mind the best way for this ( but too late for 8.2 ) will be to
-have a tool called soundrake. Thanks to this tools, you choose at the
-beginning if you want to use OSS or alsa and then try to correctly
-configure your sound card. This tool should be able to work in
-embended mo in harddrake or harddrake2 ( infos concerning this so long
-awaiting harddrake 2 ? ).
-
-In order to make this tool be a perfect tool, it should be able to
-advice user concerning the advantage and the disadvantage of each
-driver ( indeed alsa sometimes is better than OSS as it support full
-duplex and wave mixing on more sound cards ).
-It's also disturbing is harddrake set alsa by default and XrakX set
-OSS by default as sometimes by lanching harddrake ( just to see what
-happen ) you lose ( or seems to lose ) your sound card ( mute mixer )
-
-For example :
-+ launch harddrake
-+ use autodetection : yes/no
-+ if auto detects enable, it detects a SBLive.
-+ explanations text concerning the fact that :
-   if I use OSS I will be able to use sounds effects, live drive and
-others things ( AC-3 passthrough ) thanks to the emu10k1-tools packages
-( available on CD sets and installable via Software Manager )
-   if I use Alsa, I won't be able to use emu10k1-tools but at the
-contrary I will be able to use midi software as alsa module support midi
-+ ask user which one he wants to use : OSS / Alsa ?
-+ set the sound card drivers and modules.conf according to user wishes
-+ <mode= dream> if I select OSS, installed emu10k1-tools and provide a
-GUI to configure them </mode = dream>
-+ <mode= dream> if I select Alsa unmute at least PCM and Vol or display
-a warning saying that by default Alsa mute everything ( configure alsa
-service so that it save mixer settings )
-+ test the sound ( mandrake sound theme )
-+ do you hear something ?
-+ yes -> your sound card have been properly set.
-+ if no -> try the others drivers set or send lspcidrake -v to
-somebody@somewhere.org to check for support for your sound card
-+ Do you ahave another sound card ?
diff --git a/perl-install/harddrake/data.pm b/perl-install/harddrake/data.pm
deleted file mode 100644
index 01fa6be00..000000000
--- a/perl-install/harddrake/data.pm
+++ /dev/null
@@ -1,70 +0,0 @@
-package harddrake::data;
-
-use strict;
-use detect_devices;
-use MDK::Common;
-use class_discard;
-
-our (@ISA, @EXPORT_OK) = (qw(Exporter), (qw(version tree)));
-our ($version, $sbindir, $bindir) = ("1.1.5", "/usr/sbin", "/usr/bin");
-
-# Update me each time you handle one more devices class (aka configurator)
-sub unknown {
-    grep { $_->{media_type} !~ /tape|DISPLAY|MULTIMEDIA_VIDEO|BRIDGE|NETWORK|MULTIMEDIA_AUDIO/ } detect_devices::probeall(1);
-}
-
-
-# tree format ("CLASS_ID", "type", "type_icon", configurator, detect_sub)
-# NEVER, NEVER alter CLASS_ID or you'll harddrake2 service to detect changes
-# in hw configuration ... :-(
-
-our @tree =
-    (
-	["FLOPPY","Floppy", "floppy.png", "",\&detect_devices::floppies],
-	["HARDDISK","Disk", "harddisk.png", "$sbindir/diskdrake", \&detect_devices::hds],
-	["CDROM","Cdrom", "cd.png", "", \&detect_devices::cdroms],
-	["TAPE","Tape", "tape.png", "", \&detect_devices::tapes],
-#	["CDBURNER","Cd burners", "cd.png", "", \&detect_devices::burners],
-
-	["VIDEO","Videocard", "video.png", "$sbindir/XFdrake", 
-	 sub {grep { $_->{driver} =~ /^(Card|Server):/ || $_->{media_type} =~ 'DISPLAY_VGA' } detect_devices::probeall(1) }],
-	["TV","Tvcard", "tv.png", "/usr/bin/XawTV", 
-	 sub {grep { $_->{media_type} =~ 'MULTIMEDIA_VIDEO' } detect_devices::probeall(1)}],
-	["AUDIO","Soundcard", "sound.png", "$bindir/aumix", 
-	 sub {grep { $_->{media_type} =~ 'MULTIMEDIA_AUDIO' } detect_devices::probeall(1)}],
-#	"MULTIMEDIA_AUDIO" => "/usr/bin/X11/sounddrake";
-	["WEBCAM","Webcam", "webcam.png", "", sub {}],
-	["ETHERNET","Ethernetcard", "hw_network.png", "$sbindir/draknet", sub {
-	    #- generic NIC detection for USB seems broken (class, subclass, 
-	    #- protocol report are not accurate) so I'll need to verify against
-	    #- known drivers :-(
-	    my @usbnet = qw/CDCEther catc kaweth pegasus usbnet/;
-	    # should be taken from detect_devices.pm or modules.pm. it's identical
-	    
-	    grep { $_->{media_type} =~ /^NETWORK/ || 
-				member($_->{driver}, @usbnet)
-			 } detect_devices::probeall(1)}],
-#	["","Tokenring cards", "Ethernetcard.png", "", \&detect_devices::getNet],
-#	["","FDDI cards", "Ethernetcard.png", "", \&detect_devices::getNet],
-#	["","Modem", "Modem.png", "", \&detect_devices::getNet],
-#	["","Isdn", "", "", \&detect_devices::getNet]
-
-	["BRIDGE","Bridge", "memory.png", "", sub {grep { $_->{media_type} =~ 'BRIDGE' } detect_devices::probeall(1)}],
-# 	["","Cpu", "cpu.png", "", sub {}],
-#	["","Memory", "memory.png", "", sub {}],
-	["UNKNOWN","Unknown/Others", "unknown.png", "" , \&unknown],
-
-	["PRINTER","Printer", "hw_printer.png", "$sbindir/printerdrake", 
-	 sub { require printerdrake; printerdrake::auto_detect(class_discard->new)  } ],
-	["SCANNER","Scanner", "scanner.png", "$sbindir/scannerdrake",
-	 sub { require scanner; scanner::findScannerUsbport() }],
-	["MOUSE","Mouse", "hw_mouse.png", "$sbindir/mousedrake", sub { require mouse; &mouse::detect()}],
-	["JOYSTICK","Joystick", "joystick.png", "", sub {}]
-
-#	["","Ideinterface", "Ideinterface.png", "", "STORAGE_IDE"],
-#	["","Scsiinterface", "Scsiinterface.png", "", \&detect_devices::getSCSI],
-#	["","Usbinterface", "Usbinterface.png", "", \&detect_devices::usb_probe]
-	);
-
-
-1;
diff --git a/perl-install/harddrake/ui.pm b/perl-install/harddrake/ui.pm
deleted file mode 100644
index 4da7b556c..000000000
--- a/perl-install/harddrake/ui.pm
+++ /dev/null
diff --git a/perl-install/help.pm b/perl-install/help.pm
deleted file mode 100644
index 283f4464c..000000000
--- a/perl-install/help.pm
+++ /dev/null
@@ -1,903 +0,0 @@
-package help;
-use common;
-
-# IMPORTANT: Don't edit this File - It is automatically generated 
-#            from the manuals !!! 
-#            Write a mail to <documentation@mandrakesoft.com> if
-#            you want it changed.
-
-%steps = (
-empty => '',
-
-addUser => 
-__("GNU/Linux is a multiuser system, and this means that each user can have his
-own preferences, his own files and so on. You can read the ``User Guide''
-to learn more. But unlike \"root\", which is the administrator, the users
-you will add here will not be entitled to change anything except their own
-files and their own configuration. You will have to create at least one
-regular user for yourself. That account is where you should log in for
-routine use. Although it is very practical to log in as \"root\" everyday,
-it may also be very dangerous! The slightest mistake could mean that your
-system would not work any more. If you make a serious mistake as a regular
-user, you may only lose some information, but not the entire system.
-
-First, you have to enter your real name. This is not mandatory, of course
-as you can actually enter whatever you want. DrakX will then take the first
-word you have entered in the box and will bring it over to the \"User
-name\". This is the name this particular user will use to log onto the
-system. You can change it. You then have to enter a password here. A
-non-privileged (regular) user's password is not as crucial as \"root\"' one
-from a security point of view, but that is no reason to neglect it: after
-all, your files are at risk.
-
-If you click on \"Accept user\", you can then add as many as you want. Add
-a user for each one of your friends: your father or your sister, for
-example. When you finish adding all the users you want, select \"Done\".
-
-Clicking the \"Advanced\" button allows you to change the default \"shell\"
-for that user (bash by default)."),
-
-ask_mntpoint_s => 
-__("Listed above are the existing Linux partitions detected on your hard drive.
-You can keep the choices made by the wizard, they are good for most common
-installations. If you make any changes, you must at least define a root
-partition (\"/\"). Do not choose too small a partition or you will not be
-able to install enough software. If you want to store your data on a
-separate partition, you will also need to create a partition for \"/home\"
-(only possible if you have more than one Linux partition available).
-
-Each partition is listed as follows: \"Name\", \"Capacity\".
-
-\"Name\" is structured: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
-
-\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and
-\"sd\" if it is a SCSI hard drive.
-
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE
-hard drives:
-
- * \"a\" means \"master hard drive on the primary IDE controller\";
-
- * \"b\" means \"slave hard drive on the primary IDE controller\";
-
- * \"c\" means \"master hard drive on the secondary IDE controller\";
-
- * \"d\" means \"slave hard drive on the secondary IDE controller\".
-
-With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means
-\"second lowest SCSI ID\", etc."),
-
-chooseCd => 
-__("The Mandrake Linux installation is spread out over several CD-ROMs. DrakX
-knows if a selected package is located on another CD-ROM and will eject the
-current CD and ask you to insert a different one as required."),
-
-choosePackages => 
-__("It is now time to specify which programs you wish to install on your
-system. There are thousands of packages available for Mandrake Linux, and
-you are not supposed to know them all by heart.
-
-If you are performing a standard installation from a CD-ROM, you will first
-be asked to specify the CDs you currently have (in Expert mode only). Check
-the CD labels and highlight the boxes corresponding to the CDs you have
-available for installation. Click \"OK\" when you are ready to continue.
-
-Packages are sorted in groups corresponding to a particular use of your
-machine. The groups themselves are sorted into four sections:
-
- * \"Workstation\": if you plan to use your machine as a workstation, select
-one or more of the corresponding groups;
-
- * \"Development\": if your machine is to be used for programming, choose
-the desired group(s);
-
- * \"Server\": if your machine is intended to be a server, you will be able
-to select which of the most common services you wish to install on your
-machine;
-
- * \"Graphical Environment\": finally, this is where you will choose your
-preferred graphical environment. At least one must be selected if you want
-to have a graphical workstation!
-
-Moving the mouse cursor over a group name will display a short explanatory
-text about that group. If you deselect all groups when performing a regular
-installation (by opposition to an upgrade), a dialog will pop up proposing
-different options for a minimal installation:
-
- * \"With X\": install the fewer packages possible to have a working
-graphical desktop;
-
- * \"With basic documentation\": installs the base system plus basic
-utilities and their documentation. This installation is suitable for
-setting up a server;
-
- * \"Truly minimal install\": will install the strict minimum necessary to
-get a working Linux system, in command line only. This installation is
-about 65Mb large.
-
-You can check the \"Individual package selection\" box, which is useful if
-you are familiar with the packages being offered or if you want to have
-total control over what will be installed.
-
-If you started the installation in \"Upgrade\" mode, you can unselect all
-groups to avoid installing any new package. This is useful for repairing or
-updating an existing system."),
-
-choosePackagesTree => 
-__("Finally, depending on whether or not you selected individual packages, you
-will be presented a tree containing all packages classified by groups and
-subgroups. While browsing the tree, you can select entire groups,
-subgroups, or individual packages.
-
-Whenever you select a package on the tree, a description appears on the
-right. When your selection is finished, click the \"Install\" button which
-will then launch the installation process. Depending on the speed of your
-hardware and the number of packages that need to be installed, it may take
-a while to complete the process. An estimate of the time it will take to
-install everything is displayed on the screen, to help you gauge if there
-is sufficient time to enjoy a cup of coffee.
-
-!! If a server package has been selected, either intentionally or because
-it was part of a whole group, you will be asked to confirm that you really
-want those servers to be installed. Under Mandrake Linux, any installed
-servers are started by default at boot time. Even if they are safe and have
-no known issues at the time the distribution was shipped, it may happen
-that security holes are discovered after this version of Mandrake Linux was
-finalized. If you do not know what a particular service is supposed to do
-or why it is being installed, then click \"No\". Clicking \"Yes\" will
-install the listed services and they will be started automatically by
-default. !!
-
-The \"Automatic dependencies\" option simply disables the warning dialog
-which appears whenever the installer automatically selects a package. This
-occurs because it has determined that it needs to satisfy a dependency with
-another package in order to successfully complete the installation.
-
-The tiny floppy disk icon at the bottom of the list allows to load the
-package list chosen during a previous installation. Clicking on this icon
-will ask you to insert a floppy disk previously created at the end of
-another installation. See the second tip of last step on how to create such
-a floppy."),
-
-configureNetwork => 
-__("You are now proposed to set up your Internet/network connection. If you
-wish to connect your computer to the Internet or to a local network, click
-\"OK\". The autodetection of network devices and modem will be launched. If
-this detection fails, uncheck the \"Use auto detection\" box next time. You
-may also choose not to configure the network, or do it later; in that case,
-simply click the \"Cancel\" button.
-
-Available connections are: traditional modem, ISDN modem, ADSL connection,
-cable modem, and finally a simple LAN connection (Ethernet).
-
-Here, we will not detail each configuration. Simply make sure that you have
-all the parameters from your Internet Service Provider or system
-administrator.
-
-You can consult the ``User Guide'' chapter about Internet connections for
-details about the configuration, or simply wait until your system is
-installed and use the program described there to configure your connection.
-
-If you wish to configure the network later after installation, or if you
-are finished configuring your network connection, click \"Cancel\"."),
-
-configureServices => 
-__("You may now choose which services you wish to start at boot time.
-
-Here are presented all the services available with the current
-installation. Review them carefully and uncheck those which are not always
-needed at boot time.
-
-You can get a short explanatory text about a service by selecting a
-specific service. However, if you are not sure whether a service is useful
-or not, it is safer to leave the default behavior.
-
-!! At this stage, be very careful if you intend to use your machine as a
-server: you will probably not want to start any services which you do not
-need. Please remember that several services can be dangerous if they are
-enabled on a server. In general, select only the services you really need.
-!!"),
-
-configureTimezoneGMT => 
-__("GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in
-local time according to the time zone you selected. It is however possible
-to deactivate this by deselecting \"Hardware clock set to GMT\" so that the
-hardware clock is the same as the system clock. This is useful when the
-machine is hosting another operating system like Windows.
-
-The \"Automatic time synchronization\" option will automatically regulate
-the clock by connecting to a remote time server on the Internet. In the
-list that is presented, choose a server located near you. Of course you
-must have a working Internet connection for this feature to work. It will
-actually install on your machine a time server which can be optionally used
-by other machines on your local network."),
-
-configureX => 
-__("X (for X Window System) is the heart of the GNU/Linux graphical interface
-on which all the graphical environments (KDE, GNOME, AfterStep,
-WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX
-will try to configure X automatically.
-
-It is extremely rare for it to fail, unless the hardware is very old (or
-very new). If it succeeds, it will start X automatically with the best
-resolution possible, depending on the size of the monitor. A window will
-then appear and ask you if you can see it.
-
-If you are doing an \"Expert\" installation, you will enter the X
-configuration wizard. See the corresponding section of the manual for more
-information about this wizard.
-
-If you can see the message during the test, and answer \"Yes\", then DrakX
-will proceed to the next step. If you cannot see the message, it simply
-means that the configuration was wrong and the test will automatically end
-after 10 seconds, restoring the screen."),
-
-configureXmain => 
-__("The first time you try the X configuration, you may not be very satisfied
-with its display (screen is too small, shifted left or right...). Hence,
-even if X starts up correctly, DrakX then asks you if the configuration
-suits you. It will also propose to change it by displaying a list of valid
-modes it could find, asking you to select one.
-
-As a last resort, if you still cannot get X to work, choose \"Change
-graphics card\", select \"Unlisted card\", and when prompted on which
-server, choose \"FBDev\". This is a failsafe option which works with any
-modern graphics card. Then choose \"Test again\" to be sure."),
-
-configureXxdm => 
-__("Finally, you will be asked whether you want to see the graphical interface
-at boot. Note this question will be asked even if you chose not to test the
-configuration. Obviously, you want to answer \"No\" if your machine is to
-act as a server, or if you were not successful in getting the display
-configured."),
-
-createBootdisk => 
-__("The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by
-booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<
-at the prompt. But in case your computer cannot boot from the CD-ROM, you
-should come back to this step for help in at least two situations:
-
- * when installing the bootloader, DrakX will rewrite the boot sector (MBR)
-of your main disk (unless you are using another boot manager), to allow you
-to start up with either Windows or GNU/Linux (assuming you have Windows in
-your system). If you need to reinstall Windows, the Microsoft install
-process will rewrite the boot sector, and then you will not be able to
-start GNU/Linux!
-
- * if a problem arises and you cannot start up GNU/Linux from the hard disk,
-this floppy disk will be the only means of starting up GNU/Linux. It
-contains a fair number of system tools for restoring a system, which has
-crashed due to a power failure, an unfortunate typing error, a typo in a
-password, or any other reason.
-
-When you click on this step, you will be asked to enter a disk inside the
-drive. The floppy disk you will insert must be empty or contain data which
-you do not need. You will not have to format it since DrakX will rewrite
-the whole disk."),
-
-doPartitionDisks => 
-__("At this point, you need to choose where you want to install the Mandrake
-Linux operating system on your hard drive. If your hard drive is empty or
-if an existing operating system is using all the available space, you will
-need to partition it. Basically, partitioning a hard drive consists of
-logically dividing it to create space to install your new Mandrake Linux
-system.
-
-Because the partitioning process' effects are usually irreversible,
-partitioning can be intimidating and stressful if you are an inexperienced
-user. Fortunately, there is a wizard which simplifies this process. Before
-beginning, please consult the manual and take your time.
-
-If you are running the installation in Expert mode, you will enter
-DiskDrake, the Mandrake Linux partitioning tool, which allows you to
-fine-tune your partitions. See the DiskDrake section in the ``User Guide''.
-From the installation interface, you can use the wizards as described here
-by clicking the dialog's \"Wizard\" button.
-
-If partitions have already been defined, either from a previous
-installation or from another partitioning tool, simply select those to
-install your Linux system.
-
-If partitions are not defined, you will need to create them using the
-wizard. Depending on your hard drive configuration, several options are
-available:
-
- * \"Use free space\": this option will simply lead to an automatic
-partitioning of your blank drive(s). You will not be prompted further;
-
- * \"Use existing partition\": the wizard has detected one or more existing
-Linux partitions on your hard drive. If you want to use them, choose this
-option;
-
- * \"Use the free space on the Windows; partition\": if MicrosoftWindows is
-installed on your hard drive and takes all the space available on it, you
-have to create free space for Linux data. To do so, you can delete your
-MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert
-mode'' solutions) or resize your MicrosoftWindows partition. Resizing can
-be performed without the loss of any data, provided you previously
-defragment the Windows partition. Backing up your data won't hurt either..
-This solution is recommended if you want to use both Mandrake Linux and
-MicrosoftWindows on the same computer.
-
-   Before choosing this option, please understand that after this procedure,
-the size of your MicrosoftWindows partition will be smaller than at the
-present time. You will have less free space under MicrosoftWindows to store
-your data or to install new software;
-
- * \"Erase entire disk\": if you want to delete all data and all partitions
-present on your hard drive and replace them with your new Mandrake Linux
-system, choose this option. Be careful with this solution because you will
-not be able to revert your choice after you confirm;
-
-   !! If you choose this option, all data on your disk will be lost. !!
-
- * \"Remove Windows\": this will simply erase everything on the drive and
-begin fresh, partitioning everything from scratch. All data on your disk
-will be lost;
-
-   !! If you choose this option, all data on your disk will be lost. !!
-
- * \"Expert mode\": choose this option if you want to manually partition
-your hard drive. Be careful it is a powerful but dangerous choice. You can
-very easily lose all your data. Hence, do not choose this unless you know
-what you are doing."),
-
-exitInstall => 
-__("There you are. Installation is now complete and your GNU/Linux system is
-ready to use. Just click \"OK\" to reboot the system. You can start
-GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as
-soon as the computer has booted up again.
-
-The \"Advanced\" button (in Expert mode only) shows two more buttons to:
-
- * \"generate auto-install floppy\": to create an installation floppy disk
-which will automatically perform a whole installation without the help of
-an operator, similar to the installation you just configured.
-
-   Note that two different options are available after clicking the button:
-
-    * \"Replay\". This is a partially automated installation as the
-partitioning step (and only this one) remains interactive;
-
-    * \"Automated\". Fully automated installation: the hard disk is completely
-rewritten, all data is lost.
-
-   This feature is very handy when installing a great number of similar
-machines. See the Auto install section on our web site;
-
- * \"Save packages selection\"(*): saves the package selection as done
-previously. Then, when doing another installation, insert the floppy inside
-the drive and run the installation going to the help screen by pressing on
-the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.
-
-(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type
-\"mformat a:\")"),
-
-formatPartitions => 
-__("Any partitions that have been newly defined must be formatted for use
-(formatting means creating a filesystem).
-
-At this time, you may wish to reformat some already existing partitions to
-erase any data they contain. If you wish to do that, please select those
-partitions as well.
-
-Please note that it is not necessary to reformat all pre-existing
-partitions. You must reformat the partitions containing the operating
-system (such as \"/\", \"/usr\" or \"/var\") but you do not have to
-reformat partitions containing data that you wish to keep (typically
-\"/home\").
-
-Please be careful when selecting partitions. After formatting, all data on
-the selected partitions will be deleted and you will not be able to recover
-any of it.
-
-Click on \"OK\" when you are ready to format partitions.
-
-Click on \"Cancel\" if you want to choose another partition for your new
-Mandrake Linux operating system installation.
-
-Click on \"Advanced\" if you wish to select partitions that will be checked
-for bad blocks on the disk."),
-
-installPackages => 
-__("Your new Mandrake Linux operating system is currently being installed.
-Depending on the number of packages you will be installing and the speed of
-your computer, this operation could take from a few minutes to a
-significant amount of time.
-
-Please be patient."),
-
-installUpdates => 
-__("At the time you are installing Mandrake Linux, it is likely that some
-packages have been updated since the initial release. Some bugs may have
-been fixed, and security issues solved. To allow you to benefit from these
-updates, you are now proposed to download them from the Internet. Choose
-\"Yes\" if you have a working Internet connection, or \"No\" if you prefer
-to install updated packages later.
-
-Choosing \"Yes\" displays a list of places from which updates can be
-retrieved. Choose the one nearest you. Then a package-selection tree
-appears: review the selection, and press \"Install\" to retrieve and
-install the selected package(s), or \"Cancel\" to abort."),
-
-license => 
-__("Before continuing, you should read carefully the terms of the license. It
-covers the whole Mandrake Linux distribution, and if you do not agree with
-all the terms in it, click on the \"Refuse\" button which will immediately
-terminate the installation. To continue with the installation, click on the
-\"Accept\" button."),
-
-miscellaneous => 
-__("At this point, it is time to choose the security level desired for the
-machine. As a rule of thumb, the more exposed the machine is, and the more
-the data stored in it is crucial, the higher the security level should be.
-However, a higher security level is generally obtained at the expense of
-easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''
-to get more information about the meaning of these levels.
-
-If you do not know what to choose, keep the default option."),
-
-partition_with_diskdrake => 
-__("At this point, you need to choose which partition(s) will be used for the
-installation of your Mandrake Linux system. If partitions have already been
-defined, either from a previous installation of GNU/Linux or from another
-partitioning tool, you can use existing partitions. Otherwise, hard drive
-partitions must be defined.
-
-To create partitions, you must first select a hard drive. You can select
-the disk for partitioning by clicking on ``hda'' for the first IDE drive,
-``hdb'' for the second, ``sda'' for the first SCSI drive and so on.
-
-To partition the selected hard drive, you can use these options:
-
- * \"Clear all\": this option deletes all partitions on the selected hard
-drive;
-
- * \"Auto allocate\": this option enables to automatically create \"Ext2\"
-and swap partitions in free space of your hard drive;
-
- * \"More\": gives access to additional features:
-
-    * \"Save partition table\": saves the partition table to a floppy. Useful
-for later partition-table recovery if necessary. It is strongly recommended
-to perform this step;
-
-    * \"Restore partition table\": allows to restore a previously saved
-partition table from floppy disk;
-
-    * \"Rescue partition table\": if your partition table is damaged, you can
-try to recover it using this option. Please be careful and remember that it
-can fail;
-
-    * \"Reload partition table\": discards all changes and loads your initial
-partition table;
-
-    * \"Removable media automounting\": unchecking this option will force users
-to manually mount and unmount removable medias such as floppies and
-CD-ROMs.
-
- * \"Wizard\": use this option if you wish to use a wizard to partition your
-hard drive. This is recommended if you do not have a good knowledge of
-partitioning;
-
- * \"Undo\": use this option to cancel your changes;
-
- * \"Toggle to normal/expert mode\": allows additional actions on partitions
-(type, options, format) and gives more information;
-
- * \"Done\": when you are finished partitioning your hard drive, this will
-save your changes back to disk.
-
-Note: you can reach any option using the keyboard. Navigate through the
-partitions using [Tab] and [Up/Down] arrows.
-
-When a partition is selected, you can use:
-
- * Ctrl-c to create a new partition (when an empty partition is selected);
-
- * Ctrl-d to delete a partition;
-
- * Ctrl-m to set the mount point.
-
-To get information about the different filesystem types available, please
-read the ext2fs chapter from the ``Reference Manual''.
-
-If you are installing on a PPC machine, you will want to create a small HFS
-``bootstrap'' partition of at least 1MB, which will be used by the yaboot
-bootloader. If you opt to make the partition a bit larger, say 50MB, you
-may find it a useful place to store a spare kernel and ramdisk images for
-emergency boot situations."),
-
-resizeFATChoose => 
-__("More than one Microsoft partition has been detected on your hard drive.
-Please choose the one you want to resize in order to install your new
-Mandrake Linux operating system.
-
-Each partition is listed as follows: \"Linux name\", \"Windows name\"
-\"Capacity\".
-
-\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
-
-\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and
-\"sd\" if it is a SCSI hard drive.
-
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE
-hard drives:
-
- * \"a\" means \"master hard drive on the primary IDE controller\";
-
- * \"b\" means \"slave hard drive on the primary IDE controller\";
-
- * \"c\" means \"master hard drive on the secondary IDE controller\";
-
- * \"d\" means \"slave hard drive on the secondary IDE controller\".
-
-With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means
-\"second lowest SCSI ID\", etc.
-
-\"Windows name\" is the letter of your hard drive under Windows (the first
-disk or partition is called \"C:\")."),
-
-resizeFATWait => 
-__("Please be patient. This operation can take several minutes."),
-
-selectInstallClass => 
-__("DrakX now needs to know if you want to perform a default (\"Recommended\")
-installation or if you want to have greater control (\"Expert\"). You can
-also choose to do a new install or an upgrade of an existing Mandrake Linux
-system:
-
- * \"Install\": completely wipes out the old system. In fact, depending on
-what currently holds your machine, you will be able to keep some old (Linux
-or other) partitions unchanged;
-
- * \"Upgrade\": this installation class allows to simply update the packages
-currently installed on your Mandrake Linux system. It keeps the current
-partitions of your hard drives as well as user configurations. All other
-configuration steps remain available with respect to plain installation;
-
- * \"Upgrade Packages Only\": this brand new class allows to upgrade an
-existing Mandrake Linux system while keeping all system configurations
-unchanged. Adding new packages to the current installation is also
-possible.
-
-Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"
-release.
-
-Depending on your knowledge of GNU/Linux, select one of the following
-choices:
-
- * Recommended: choose this if you have never installed a GNU/Linux
-operating system. The installation will be very easy and you will only be
-asked a few questions;
-
- * Expert: if you have a good knowledge of GNU/Linux, you can choose this
-installation class. The expert installation will allow you to perform a
-highly-customized installation. Answering some of the questions can be
-difficult if you do not have a good knowledge of GNU/Linux, so do not
-choose this unless you know what you are doing."),
-
-selectKeyboard => 
-__("Normally, DrakX selects the right keyboard for you (depending on the
-language you have chosen) and you won't even see this step. However, you
-might not have a keyboard that corresponds exactly to your language: for
-example, if you are an English speaking Swiss person, you may still want
-your keyboard to be a Swiss keyboard. Or if you speak English but are
-located in Quebec, you may find yourself in the same situation. In both
-cases, you will have to go back to this installation step and select an
-appropriate keyboard from the list.
-
-Click on the \"More\" button to be presented with the complete list of
-supported keyboards."),
-
-selectLanguage => 
-__("Please choose your preferred language for installation and system usage.
-
-Clicking on the \"Advanced\" button will allow you to select other
-languages to be installed on your workstation. Selecting other languages
-will install the language-specific files for system documentation and
-applications. For example, if you will host users from Spain on your
-machine, select English as the main language in the tree view and in the
-Advanced section click on the box corresponding to \"Spanish|Spain\".
-
-Note that multiple languages may be installed. Once you have selected any
-additional locales, click the \"OK\" button to continue."),
-
-selectMouse => 
-__("DrakX generally detects the number of buttons your mouse has. If not, it
-assumes you have a two-button mouse and will set it up for third-button
-emulation. DrakX will automatically know whether it is a PS/2, serial or
-USB mouse.
-
-If you wish to specify a different type of mouse select the appropriate
-type from the provided list.
-
-If you choose a mouse other than the default, a test screen will be
-displayed. Use the buttons and wheel to verify that the settings are
-correct. If the mouse is not working well, press the space bar or [Return]
-to \"Cancel\" and choose again."),
-
-selectSerialPort => 
-__("Please select the correct port. For example, the \"COM1\" port under
-Windows is named \"ttyS0\" under GNU/Linux."),
-
-setRootPassword => 
-__("This is the most crucial decision point for the security of your GNU/Linux
-system: you have to enter the \"root\" password. \"root\" is the system
-administrator and is the only one authorized to make updates, add users,
-change the overall system configuration, and so on. In short, \"root\" can
-do everything! That is why you must choose a password that is difficult to
-guess DrakX will tell you if it is too easy. As you can see, you can choose
-not to enter a password, but we strongly advise you against this if only
-for one reason: do not think that because you booted GNU/Linux that your
-other operating systems are safe from mistakes. Since \"root\" can overcome
-all limitations and unintentionally erase all data on partitions by
-carelessly accessing the partitions themselves, it is important for it to
-be difficult to become \"root\".
-
-The password should be a mixture of alphanumeric characters and at least 8
-characters long. Never write down the \"root\" password it makes it too
-easy to compromise a system.
-
-However, please do not make the password too long or complicated because
-you must be able to remember it without too much effort.
-
-The password will not be displayed on screen as you type it in. Hence, you
-will have to type the password twice to reduce the chance of a typing
-error. If you do happen to make the same typing error twice, this
-``incorrect'' password will have to be used the first time you connect.
-
-In Expert mode, you will be asked if you will be connecting to an
-authentication server, like NIS or LDAP.
-
-If your network uses the LDAP (or NIS) protocol for authentication, select
-\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your
-network administrator.
-
-If your computer is not connected to any administrated network, you will
-want to choose \"Local files\" for authentication."),
-
-setupBootloader => 
-__("LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally
-automated. In fact, DrakX analyzes the disk boot sector and acts
-accordingly, depending on what it finds here:
-
- * if a Windows boot sector is found, it will replace it with a grub/LILO
-boot sector. Hence, you will be able to load either GNU/Linux or another
-OS;
-
- * if a grub or LILO boot sector is found, it will replace it with a new
-one.
-
-If in doubt, DrakX will display a dialog with various options.
-
- * \"Bootloader to use\": you have three choices:
-
-    * \"GRUB\": if you prefer grub (text menu).
-
-    * \"LILO with graphical menu\": if you prefer LILO with its graphical
-interface.
-
-    * \"LILO with text menu\": if you prefer LILO with its text menu interface.
-
- * \"Boot device\": in most cases, you will not change the default
-(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the
-second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");
-
- * \"Delay before booting the default image\": when rebooting the computer,
-this is the delay granted to the user to choose in the bootloader menu,
-another boot entry than the default one.
-
-!! Beware that if you choose not to install a bootloader (by selecting
-\"Cancel\" here), you must ensure that you have a way to boot your Mandrake
-Linux system! Also, be sure you know what you do before changing any of the
-options. !!
-
-Clicking the \"Advanced\" button in this dialog will offer many advanced
-options, which are reserved to the expert user.
-
-After you have configured the general bootloader parameters, the list of
-boot options which will be available at boot time will be displayed.
-
-If there is another operating system installed on your machine, it will
-automatically be added to the boot menu. Here, you can choose to fine-tune
-the existing options. Select an entry and click \"Modify\" to modify or
-remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next
-installation step."),
-
-setupBootloaderAddEntry => 
-__("LILO (the LInux LOader) and grub are bootloaders: they are able to boot
-either GNU/Linux or any other operating system present on your computer.
-Normally, these other operating systems are correctly detected and
-installed. If this is not the case, you can add an entry by hand in this
-screen. Be careful to choose the correct parameters.
-
-You may also not want to give access to these other operating systems to
-anyone. In which case, you can delete the corresponding entries. But then,
-you will need a boot disk in order to boot those other operating systems!"),
-
-setupBootloaderBeginner => 
-__("You must indicate where you wish to place the information required to boot
-to GNU/Linux.
-
-Unless you know exactly what you are doing, choose \"First sector of drive
-(MBR)\"."),
-
-setupDefaultSpooler => 
-__("Here, we select a printing system for your computer. Other OSs may offer
-you one, but Mandrake Linux offers three.
-
- * \"pdq\" which means ``print, don't queue'', is the choice if you have a
-direct connection to your printer and you want to be able to panic out of
-printer jams, and you do not have networked printers. It will handle only
-very simple network cases and is somewhat slow for networks. Pick \"pdq\"
-if this is your maiden voyage to GNU/Linux. You can change your choices
-after installation by running PrinterDrake from the Mandrake Control Center
-and clicking the expert button.
-
- * \"CUPS\"``Common Unix Printing System'', is excellent at printing to your
-local printer and also halfway-around the planet. It is simple and can act
-as a server or a client for the ancient \"lpd\" printing system. Hence, it
-is compatible with the systems that went before. It can do many tricks, but
-the basic setup is almost as easy as \"pdq\". If you need this to emulate
-an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has
-graphical front-ends for printing or choosing printer options.
-
- * \"lprNG\"``line printer daemon New Generation''. This system can do
-approximately the same things the others can do, but it will print to
-printers mounted on a Novell Network, because it supports the IPX protocol,
-and it can print directly to shell commands. If you have need of Novell or
-printing to commands without using a separate pipe construct, use lprNG.
-Otherwise, CUPS is preferable as it is simpler and better at working over
-networks."),
-
-setupSCSI => 
-__("DrakX now detects any IDE device present in your computer. It will also
-scan for one or more PCI SCSI card(s) on your system. If a SCSI card is
-found, DrakX will automatically install the appropriate driver.
-
-Because hardware detection does not always detect a piece of hardware,
-DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"
-if you know that there is a SCSI card installed in your machine. You will
-be presented a list of SCSI cards to choose from. Click \"No\" if you have
-no SCSI hardware. If you are unsure, you can check the list of hardware
-detected in your machine by selecting \"See hardware info\" and clicking
-\"OK\". Examine the list of hardware and then click on the \"OK\" button to
-return to the SCSI interface question.
-
-If you have to manually specify your adapter, DrakX will ask if you want to
-specify options for it. You should allow DrakX to probe the hardware for
-the card-specific options which the hardware needs to initialize. This
-usually works well.
-
-If DrakX is not able to probe for the options which need to be passed, you
-will need to provide options to the driver manually. Please review the
-``User Guide'' (chapter 3, in the ``Collecting Information on Your
-Hardware'' section) for hints on retrieving the parameters required from
-hardware documentation, from the manufacturer's web site (if you have
-Internet access) or from MicrosoftWindows (if you used this hardware with
-Windows on your system)."),
-
-setupYabootAddEntry => 
-__("You can add additional entries for yaboot, either for other operating
-systems, alternate kernels, or for an emergency boot image.
-
-For other OSs, the entry consists only of a label and the \"root\"
-partition.
-
-For Linux, there are a few possible options:
-
- * Label: this is simply the name you will have to type at the yaboot prompt
-to select this boot option;
-
- * Image: this would be the name of the kernel to boot. Typically, vmlinux
-or a variation of vmlinux with an extension;
-
- * Root: the \"root\" device or ``/'' for your Linux installation;
-
- * Append: on Apple hardware, the kernel append option is used quite often
-to assist in initializing video hardware, or to enable keyboard mouse
-button emulation for the often lacking 2nd and 3rd mouse buttons on a stock
-Apple mouse. The following are some examples:
-
-         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 hda=autotune
-
-         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111
-
- * Initrd: this option can be used either to load initial modules, before
-the boot device is available, or to load a ramdisk image for an emergency
-boot situation;
-
- * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you
-need to allocate a large ramdisk, this option can be used;
-
- * Read-write: normally the \"root\" partition is initially brought up in
-read-only, to allow a file system check before the system becomes ``live''.
-Here, you can override this option;
-
- * NoVideo: should the Apple video hardware prove to be exceptionally
-problematic, you can select this option to boot in ``novideo'' mode, with
-native frame buffer support;
-
- * Default: selects this entry as being the default Linux selection,
-selectable by just pressing ENTER at the yaboot prompt. This entry will
-also be highlighted with a ``*'', if you press [Tab] to see the boot
-selections."),
-
-setupYabootGeneral => 
-__("Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot
-either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,
-these other operating systems are correctly detected and installed. If this
-is not the case, you can add an entry by hand in this screen. Be careful to
-choose the correct parameters.
-
-Yaboot's main options are:
-
- * Init Message: a simple text message displayed before the boot prompt;
-
- * Boot Device: indicates where you want to place the information required
-to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier
-to hold this information;
-
- * Open Firmware Delay: unlike LILO, there are two delays available with
-yaboot. The first delay is measured in seconds and at this point, you can
-choose between CD, OF boot, MacOS or Linux;
-
- * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.
-After selecting Linux, you will have this delay in 0.1 second before your
-default kernel description is selected;
-
- * Enable CD Boot?: checking this option allows you to choose ``C'' for CD
-at the first boot prompt;
-
- * Enable OF Boot?: checking this option allows you to choose ``N'' for Open
-Firmware at the first boot prompt;
-
- * Default OS: you can select which OS will boot by default when the Open
-Firmware Delay expires."),
-
-summary => 
-__("Here are presented various parameters concerning your machine. Depending on
-your installed hardware, you may or not, see the following entries:
-
- * \"Mouse\": check the current mouse configuration and click on the button
-to change it if necessary;
-
- * \"Keyboard\": check the current keyboard map configuration and click on
-the button to change that if necessary;
-
- * \"Timezone\": DrakX, by default, guesses your time zone from the language
-you have chosen. But here again, as for the choice of a keyboard, you may
-not be in the country for which the chosen language should correspond.
-Hence, you may need to click on the \"Timezone\" button in order to
-configure the clock according to the time zone you are in;
-
- * \"Printer\": clicking on the \"No Printer\" button will open the printer
-configuration wizard;
-
- * \"Sound card\": if a sound card is detected on your system, it is
-displayed here. No modification possible at installation time;
-
- * \"TV card\": if a TV card is detected on your system, it is displayed
-here. No modification possible at installation time;
-
- * \"ISDN card\": if an ISDN card is detected on your system, it is
-displayed here. You can click on the button to change the parameters
-associated with it."),
-
-takeOverHdChoose => 
-__("Choose the hard drive you want to erase in order to install your new
-Mandrake Linux partition. Be careful, all data present on it will be lost
-and will not be recoverable!"),
-
-takeOverHdConfirm => 
-__("Click on \"OK\" if you want to delete all data and partitions present on
-this hard drive. Be careful, after clicking on \"OK\", you will not be able
-to recover any data and partitions present on this hard drive, including
-any Windows data.
-
-Click on \"Cancel\" to cancel this operation without losing any data and
-partitions present on this hard drive."),
-);
diff --git a/perl-install/http.pm b/perl-install/http.pm
deleted file mode 100644
index 8d1e8d5de..000000000
--- a/perl-install/http.pm
+++ /dev/null
@@ -1,42 +0,0 @@
-package http; # $Id$
-
-use IO::Socket;
-use network;
-
-
-my $sock;
-
-sub getFile {
-    local($^W) = 0;
-
-    my ($url) = @_;
-    $sock->close if $sock;
-    $url =~ m|/XXX$| and return; #- force closing connection.
-
-    my ($host, $port, $path) = $url =~ m,^http://([^/:]+)(?::(\d+))?(/\S*)?$,;
-    $host = network::resolv($host);
-
-    $sock = IO::Socket::INET->new(PeerAddr => $host,
-				  PeerPort => $port || 80,
-				  Proto    => 'tcp',
-				  Timeout  => 60) or die "can't connect $@";
-    $sock->autoflush;
-    print $sock join("\015\012" =>
-		     "GET $path HTTP/1.0",
-		     "Host: $host" . ($port && ":$port"),
-		     "User-Agent: DrakX/vivelinuxabaszindozs",
-		     "", "");
-
-    #- skip until empty line
-    my ($now, $last, $buf, $tmp) = 0;
-    my $read = sub { sysread($sock, $buf, 1) || die; $tmp .= $buf };
-    do {
-	$last = $now;
-	&$read; &$read if $buf =~ /\015/;
-	$now = $buf =~ /\012/;
-    } until ($now && $last);
-
-    $tmp =~ /^.*\b200\b/ ? $sock : undef;
-}
-
-1;
diff --git a/perl-install/install2 b/perl-install/install2
deleted file mode 100755
index b26684f9f..000000000
--- a/perl-install/install2
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/usr/bin/perl
-#- PERL_INSTALL_DEBUG is used to launch stage2 in debug mode
-
-#- Mandrake Graphic Install $Id$
-#- Copyright (C) 1999/2000 MandrakeSoft (pixel@mandrakesoft.com)
-#-
-#- This program is free software; you can redistribute it and/or modify
-#- it under the terms of the GNU General Public License as published by
-#- the Free Software Foundation; either version 2, or (at your option)
-#- any later version.
-#-
-#- This program is distributed in the hope that it will be useful,
-#- but WITHOUT ANY WARRANTY; without even the implied warranty of
-#- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#- GNU General Public License for more details.
-#-
-#- You should have received a copy of the GNU General Public License
-#- along with this program; if not, write to the Free Software
-#- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use diagnostics;
-use strict;
-
-BEGIN {
-    #- for testing purpose
-    (my $f = __FILE__) =~ s|install2$|list_modules.pm|;
-    -e $f or symlink '../kernel/list_modules.pm', $f;
-}
-
-use lib qw(/usr/bin/perl-install .);
-use install2;
-
-$::testing = $ENV{PERL_INSTALL_TEST};
-$::isStandalone = 0;
-
-install2::main(@ARGV);
-
-c::_exit(0);
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
deleted file mode 100644
index 0b5c58b92..000000000
--- a/perl-install/install2.pm
+++ /dev/null
@@ -1,642 +0,0 @@
-
-package install2; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($o $version);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use steps;
-use common;
-use install_any qw(:all);
-use install_steps;
-use lang;
-use keyboard;
-use mouse;
-use fsedit;
-use devices;
-use partition_table qw(:types);
-use modules;
-use detect_devices;
-use run_program;
-use any;
-use log;
-use fs;
-#-$::corporate=1;
-
-
-#-#######################################################################################
-#-$O
-#-the big struct which contain, well everything (globals + the interactive methods ...)
-#-if you want to do a kickstart file, you just have to add all the required fields (see for example
-#-the variable $default)
-#-#######################################################################################
-$o = $::o = {
-#    bootloader => { linear => 0, lba32 => 1, message => 1, timeout => 5, restricted => 0 },
-    mkbootdisk => 0, #- no mkbootdisk if 0 or undef, find a floppy with 1, or fd1
-#-    packages   => [ qw() ],
-    partitioning => { clearall => 0, eraseBadPartitions => 0, auto_allocate => 0 }, #-, readonly => 0 },
-    authentication => { md5 => 1, shadow => 1 },
-    lang         => 'en_US',
-    isUpgrade    => 0,
-    toRemove     => [],
-    toSave       => [],
-#-    simple_themes => 1,
-
-    timezone => {
-#-                   timezone => "Europe/Paris",
-#-                   UTC      => 1,
-                },
-#-    superuser => { password => 'a', shell => '/bin/bash', realname => 'God' },
-#-    user => { name => 'foo', password => 'bar', home => '/home/foo', shell => '/bin/bash', realname => 'really, it is foo' },
-
-#-    keyboard => 'de',
-#-    display => "192.168.1.19:1",
-    steps        => \%steps::installSteps,
-    orderedSteps => \@steps::orderedInstallSteps,
-
-#- for the list of fields available for user and superuser, see @etc_pass_fields in install_steps.pm
-#-    intf => { eth0 => { DEVICE => "eth0", IPADDR => '1.2.3.4', NETMASK => '255.255.255.128' } },
-
-#-step : the current one
-#-prefix
-#-mouse
-#-keyboard
-#-netc
-#-methods
-#-packages compss
-#-printer haveone entry(cf printer.pm)
-
-};
-
-
-sub installStepsCall {
-    my ($o, $auto, $fun, @args) = @_;
-    $fun = "install_steps::$fun" if $auto;
-    $o->$fun(@args);
-}
-
-#-######################################################################################
-#- Steps Functions
-#- each step function are called with two arguments : clicked(because if you are a
-#- beginner you can force the the step) and the entered number
-#-######################################################################################
-
-#------------------------------------------------------------------------------
-sub selectLanguage {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'selectLanguage', $ent_number == 1);
-
-    $o->acceptLicence;
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    require pkgs;
-    my ($first_time) = $ent_number == 1;
-
-    add2hash($o->{mouse} ||= {}, mouse::read($o->{prefix})) if $o->{isUpgrade} && $first_time;
-
-    installStepsCall($o, $auto, 'selectMouse', !$first_time || $clicked);
-
-    addToBeDone { mouse::write($o->{prefix}, $o->{mouse}) } 'installPackages';
-}
-
-#------------------------------------------------------------------------------
-sub setupSCSI {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    if (!$::live && !$::g_auto_install && !$o->{blank} && !$::testing) {
-	-s modules::cz_file() or die _("Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)", modules::cz_file());
-    }
-
-    installStepsCall($o, $auto, 'setupSCSI', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub selectKeyboard {
-    my ($clicked, $first_time, $auto) = ($_[0], $_[1] == 1, $_[2]);
-
-    if ($o->{isUpgrade} && $first_time && $o->{keyboard_unsafe}) {
-	my $keyboard = keyboard::read($o->{prefix});
-	$keyboard and $o->{keyboard} = $keyboard;
-    }
-    installStepsCall($o, $auto, 'selectKeyboard', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'selectInstallClass', $clicked);
-
-    if ($o->{steps}{choosePackages}{entered} >= 1 && !$o->{steps}{installPackages}{done}) {
-	installStepsCall($o, $auto, 'setPackages');
-	installStepsCall($o, $auto, 'selectPackagesToUpgrade') if $o->{isUpgrade};
-    }
-    if ($o->{isUpgrade}) {
-	@{$o->{orderedSteps}} = map { /setupSCSI/ ? ($_, "doPartitionDisks") : $_ }
-	                        grep { !/doPartitionDisks/ } @{$o->{orderedSteps}};
-	$o->{keepConfiguration} and @{$o->{orderedSteps}} = grep { !/selectMouse|selectKeyboard|miscellaneous|setRootPassword|addUser|configureNetwork|installUpdates|summary|configureServices|configureX/ } @{$o->{orderedSteps}};
-	my $s; foreach (@{$o->{orderedSteps}}) {
-	    $s->{next} = $_ if $s;
-	    $s = $o->{steps}{$_};
-	}
-    }
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
-    my ($clicked, $ent_number, $auto) = @_;
-    $o->{steps}{formatPartitions}{done} = 0;
-    installStepsCall($o, $auto, 'doPartitionDisksBefore');
-    installStepsCall($o, $auto, 'doPartitionDisks');
-    installStepsCall($o, $auto, 'doPartitionDisksAfter');
-}
-
-sub formatPartitions {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    $o->{steps}{choosePackages}{done} = 0;
-    installStepsCall($o, $auto, 'choosePartitionsToFormat', $o->{fstab}) if !$o->{isUpgrade};
-    my $want_root_formated = fsedit::get_root($o->{fstab})->{toFormat};
-    if ($want_root_formated) {
-	foreach ('/usr') {
-	    my $part = fsedit::mntpoint2part($_, $o->{fstab}) or next;
-	    $part->{toFormat} or die _("You must also format %s", $_);
-	}
-    }
-    installStepsCall($o, $auto, 'formatMountPartitions', $o->{fstab}) if !$::testing;
-
-    if ($want_root_formated) {
-	#- we formatted /, ensure /var/lib/rpm is cleaned otherwise bad things can happen
-	#- (especially when /var is *not* formatted)
-	eval { rm_rf("$o->{prefix}/var/lib/rpm") };
-    }
-
-    mkdir "$o->{prefix}/$_", 0755 foreach 
-      qw(dev etc etc/profile.d etc/rpm etc/sysconfig etc/sysconfig/console 
-	etc/sysconfig/network-scripts etc/sysconfig/console/consolefonts 
-	etc/sysconfig/console/consoletrans
-	home mnt tmp var var/tmp var/lib var/lib/rpm var/lib/urpmi);
-    mkdir "$o->{prefix}/$_", 0700 foreach qw(root root/tmp root/drakx);
-
-    common::screenshot_dir__and_move();
-
-    any::rotate_logs($o->{prefix});
-
-    require raid;
-    raid::prepare_prefixed($o->{all_hds}{raids}, $o->{prefix});
-}
-
-#------------------------------------------------------------------------------
-sub choosePackages {
-    my ($clicked, $ent_number, $auto) = @_;
-    require pkgs;
-
-    #- always setPackages as it may have to copy hdlist files and depslist file.
-    installStepsCall($o, $auto, 'setPackages');
-    installStepsCall($o, $auto, 'selectPackagesToUpgrade') if $o->{isUpgrade} && $ent_number == 1;
-
-    installStepsCall($o, $auto, 'choosePackages', $o->{packages}, $o->{compssUsers}, $ent_number == 1);
-    log::l("compssUsersChoice's: ", join(" ", grep { $o->{compssUsersChoice}{$_} } keys %{$o->{compssUsersChoice}}));
-
-    #- check pre-condition where base backage has to be selected.
-    pkgs::packageFlagSelected(pkgs::packageByName($o->{packages}, 'basesystem')) or die "basesystem package not selected";
-
-    #- check if there are package that need installation.
-    $o->{steps}{installPackages}{done} = 0 if $o->{steps}{installPackages}{done} && pkgs::packagesToInstall($o->{packages}) > 0;
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'readBootloaderConfigBeforeInstall') if $ent_number == 1;
-
-    installStepsCall($o, $auto, 'beforeInstallPackages');
-    installStepsCall($o, $auto, 'installPackages');
-    installStepsCall($o, $auto, 'afterInstallPackages');
-}
-#------------------------------------------------------------------------------
-sub miscellaneous {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'miscellaneousBefore', $clicked);
-    installStepsCall($o, $auto, 'miscellaneous', $clicked);
-    installStepsCall($o, $auto, 'miscellaneousAfter', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub summary {
-    my ($clicked, $ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'summary', $ent_number == 1);
-}
-#------------------------------------------------------------------------------
-sub configureNetwork {
-    my ($clicked, $ent_number, $auto) = @_;
-    #- get current configuration of network device.
-    require network;
-    eval { network::read_all_conf($o->{prefix}, $o->{netc} ||= {}, $o->{intf} ||= {}) };
-    installStepsCall($o, $auto, 'configureNetwork', $ent_number == 1, $clicked);
-}
-#------------------------------------------------------------------------------
-sub installCrypto {
-    my ($clicked, $ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'installCrypto');
-}
-#------------------------------------------------------------------------------
-sub installUpdates {
-    my ($clicked, $ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'installUpdates');
-}
-#------------------------------------------------------------------------------
-sub configureServices {
-    my ($clicked, $ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'configureServices', $clicked);
-}
-#------------------------------------------------------------------------------
-sub setRootPassword {
-    my ($clicked, $ent_number, $auto) = @_;
-    return if $o->{isUpgrade};
-
-    installStepsCall($o, $auto, 'setRootPassword', $clicked);
-    addToBeDone { install_any::setAuthentication($o) } 'installPackages';
-}
-#------------------------------------------------------------------------------
-sub addUser {
-    my ($clicked, $ent_number, $auto) = @_;
-    return if $o->{isUpgrade} && !$clicked;
-
-    installStepsCall($o, $auto, 'addUser', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub createBootdisk {
-    my ($clicked, $ent_number, $auto) = @_;
-    modules::write_conf($o->{prefix});
-    installStepsCall($o, $auto, 'createBootdisk', $ent_number == 1, $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloader {
-    my ($clicked, $ent_number, $auto) = @_;
-    return if $::g_auto_install;
-
-    modules::write_conf($o->{prefix});
-
-    installStepsCall($o, $auto, 'setupBootloaderBefore') if $ent_number == 1;
-    installStepsCall($o, $auto, 'setupBootloader', $ent_number-1 + $clicked*2); #- gore :-(
-
-    local $ENV{DRAKX_PASSWORD} = $o->{bootloader}{password};
-    local $ENV{DURING_INSTALL} = 1;
-    run_program::rooted($o->{prefix}, "/usr/sbin/msec", "-o", "run_commands=0", "-o", "log=stderr", $o->{security});
-    any::config_libsafe($o->{prefix}, $o->{libsafe});
-}
-#------------------------------------------------------------------------------
-sub configureX {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    #- done here and also at the end of install2.pm, just in case...
-    install_any::write_fstab($o);
-    modules::write_conf($o->{prefix});
-
-    require pkgs;
-    installStepsCall($o, $auto, 'configureX', $clicked) if pkgs::packageFlagInstalled(pkgs::packageByName($o->{packages}, 'XFree86')) && !$o->{X}{disabled} || $clicked || $::testing;
-}
-#------------------------------------------------------------------------------
-sub exitInstall {
-    my ($clicked, $ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'exitInstall', getNextStep() eq 'exitInstall');
-}
-
-
-sub start_i810fb {
-
-    my ($vga) = cat_('/proc/cmdline') =~ /vga=(\S+)/;
-    return if !$vga || listlength(cat_('/proc/fb'));
-
-    my %vga_to_xres = (0x311 => '640', 0x314 => '800', 0x317 => '1024');
-    my $xres = $vga_to_xres{$vga} || '800';
-
-    log::l("trying to load i810fb module with xres <$xres> (vga was <$vga>)");
-    eval {
-	any::ddcxinfos(); # keep the result otherwise ddcxinfos doesn't return good results afterwards
-	modules::load([ 'i810fb',
-			"xres=$xres", 'hsync1=32', 'hsync2=48', 'vsync1=50', 'vsync2=70',  #- this sucking i810fb does not accept floating point numbers in hsync!
-			 'vram=2', 'bpp=16', 'accel=1', 'mtrr=1', 'hwcur=1', 'xcon=4' ]);
-    };
-}
-
-
-#-######################################################################################
-#- MAIN
-#-######################################################################################
-sub main {
-    $SIG{__DIE__} = sub { chomp(my $err = $_[0]); log::l("warning: $err") };
-    $SIG{SEGV} = sub { 
-	my $msg = "segmentation fault: seems like memory is missing as the install crashes"; print "$msg\n"; log::l($msg);
-	$o->ask_warn('', $msg);
-	setVirtual(1);
-	require install_steps_auto_install;
-	install_steps_auto_install_non_interactive::errorInStep ();
-    };
-    $ENV{PERL_BADLANG} = 1;
-    umask 022;
-
-    $::isInstall = 1;
-    $::expert = $::g_auto_install = 0;
-
-#-    c::unlimit_core() unless $::testing;
-
-    my ($cfg, $patch, @auto);
-    my %cmdline; map { 
-	my ($n, $v) = split '=';
-	$cmdline{$n} = $v || 1;
-    } split ' ', cat_("/proc/cmdline");
-
-    my $opt; foreach (@_) {
-	if (/^--?(.*)/) {
-	    $cmdline{$opt} = 1 if $opt;
-	    $opt = $1;
-	} else {
-	    $cmdline{$opt} = $_ if $opt;
-	    $opt = '';
-	}
-    } $cmdline{$opt} = 1 if $opt;
-    
-    map_each {
-	my ($n, $v) = @_;
-	my $f = ${{
-	    oem       => sub { $::oem = $v },
-	    lang      => sub { $o->{lang} = $v },
-	    flang     => sub { $o->{lang} = $v ; push @auto, 'selectLanguage' },
-	    method    => sub { $o->{method} = $v },
-	    pcmcia    => sub { $o->{pcmcia} = $v },
-	    vga16     => sub { $o->{vga16} = $v },
-	    vga       => sub { $o->{vga} = $v },
-	    step      => sub { $o->{steps}{first} = $v },
-	    expert    => sub { $::expert = $v },
-	    fbeginner => sub { $::expert = 0; push @auto, 'selectInstallClass' },
-	    fexpert   => sub { $::expert = 1; push @auto, 'selectInstallClass' },
-	    desktop   => sub { $o->{meta_class} = 'desktop' },
-	    firewall  => sub { $o->{meta_class} = 'firewall'; push @auto, 'selectInstallClass'},
-	    lnx4win   => sub { $o->{lnx4win} = 1 },
-	    readonly  => sub { $o->{partitioning}{readonly} = $v ne "0" },
-	    display   => sub { $o->{display} = $v },
-	    askdisplay => sub { print "Please enter the X11 display to perform the install on ? "; $o->{display} = chomp_(scalar(<STDIN>)) },
-	    security  => sub { $o->{security} = $v },
-	    live      => sub { $::live = 1 },
-	    noauto    => sub { $::noauto = 1 },
-	    test      => sub { $::testing = 1 },
-	    patch     => sub { $patch = 1 },
-	    defcfg    => sub { $cfg = $v },
-	    newt      => sub { $o->{interactive} = "newt" },
-	    text      => sub { $o->{interactive} = "newt" },
-	    stdio     => sub { $o->{interactive} = "stdio"},
-	    corporate => sub { $::corporate = 1 },
-	    kickstart => sub { $::auto_install = $v },
-	    auto_install => sub { $::auto_install = $v },
-	    simple_themes => sub { $o->{simple_themes} = 1 },
-	    useless_thing_accepted => sub { $o->{useless_thing_accepted} = 1 },
-	    alawindows => sub { $o->{security} = 0; $o->{partitioning}{clearall} = 1; $o->{bootloader}{crushMbr} = 1 },
-	    fdisk => sub { $o->{partitioning}{fdisk} = 1 },
-	    g_auto_install => sub { $::testing = $::g_auto_install = 1; $o->{partitioning}{auto_allocate} = 1 },
-	    nomouseprobe => sub { $o->{nomouseprobe} = $v },
-	    blank         => sub { $o->{blank} = 1},
-	    updatemodules => sub { $o->{updatemodules} = 1},
-	}}{lc $n}; &$f if $f;
-    } %cmdline;
-
-    if ($::testing) {
-	$ENV{SHARE_PATH} ||= "/export/Mandrake/mdkinst/usr/share";
-	$ENV{SHARE_PATH} = "/usr/share" if !-e $ENV{SHARE_PATH};
-    } else {
-	$ENV{SHARE_PATH} ||= "/usr/share";
-    }
-
-    undef $::auto_install if $cfg;
-    if ($::g_auto_install) {
-	(my $root = `/bin/pwd`) =~ s|(/[^/]*){5}$||;
-	symlinkf $root, "/tmp/image" or die "unable to create link /tmp/image";
-	$o->{method} ||= "cdrom";
-	$o->{mkbootdisk} = 0;
-    }
-    unless ($::testing || $::live) {
-	symlink "rhimage", "/tmp/image"; #- for compatibility with old stage1
-	unlink $_ foreach "/modules/modules.mar", "/sbin/stage1";
-    }
-
-    print STDERR "in second stage install\n";
-    log::openLog(($::testing || $o->{localInstall}) && 'debug.log');
-    log::l("second stage install running (", any::drakx_version(), ")");
-
-    $o->{prefix} = $::testing ? "/tmp/test-perl-install" : $::live ? "" : "/mnt";
-    $o->{root}   = $::testing ? "/tmp/root-perl-install" : "/";
-    $o->{isUpgrade} = 1 if $::live;
-    mkdir $o->{prefix}, 0755;
-    mkdir $o->{root}, 0755;
-    devices::make("/dev/zero"); #- needed by ddcxinfos
-
-    #-  make sure we don't pick up any gunk from the outside world
-    my $remote_path = "$o->{prefix}/sbin:$o->{prefix}/bin:$o->{prefix}/usr/sbin:$o->{prefix}/usr/bin:$o->{prefix}/usr/X11R6/bin";
-    $ENV{PATH} = "/usr/bin:/bin:/sbin:/usr/sbin:/usr/X11R6/bin:$remote_path" unless $::g_auto_install;
-
-    eval { spawnShell() };
-
-    $o->{prefix} = $::testing ? "/tmp/test-perl-install" : $::live ? "" : "/mnt";
-    mkdir $o->{prefix}, 0755;
-
-    modules::load_dependencies(($::testing ? ".." : "") . "/modules/modules.dep");
-    modules::read_stage1_conf($_) foreach "/tmp/conf.modules", "/etc/modules.conf";
-    modules::read_already_loaded();
-
-    #- done before auto_install is called to allow the -IP feature on auto_install file name
-    if (-e '/tmp/network') {
-	require network;
-	#- get stage1 network configuration if any.
-	log::l('found /tmp/network');
-	$o->{netc} ||= {};
-	add2hash($o->{netc}, network::read_conf('/tmp/network'));
-	if (my ($file) = glob_('/tmp/ifcfg-*')) {
-	    log::l("found network config file $file");
-	    my $l = network::read_interface_conf($file);
-	    $o->{intf} ||= { $l->{DEVICE} => $l };
-	}
-	if (-e '/etc/resolv.conf') {
-	    my $file ='/etc/resolv.conf';
-	    log::l("found network config file $file");
-	    add2hash($o->{netc}, network::read_resolv_conf($file));
-	}
-    }
-
-    #- done after module dependencies are loaded for "vfat depends on fat"
-    if ($::auto_install) {
-	if ($::auto_install =~ /-IP(\.pl)?$/) {
-	    my $ip = join('', map { sprintf "%02X", $_ } split '\.', $o->{intf}{IPADDR});
-	    $::auto_install =~ s/-IP(\.pl)?$/-$ip$1/;
-	}
-	require install_steps_auto_install;
-	eval { $o = $::o = install_any::loadO($o, $::auto_install) };
-	if ($@) {
-	    if ($o->{useless_thing_accepted}) { #- Pixel's hack to be able to fail through
-		log::l("error using auto_install, continuing");
-		undef $::auto_install;
-	    } else {
-		print "Error using auto_install\n$@\n";
-		install_steps_auto_install_non_interactive::errorInStep ();
-	    }
-	} else {
-	    log::l("auto install config file loaded successfully");
-	}
-    }
-    $o->{interactive} ||= 'gtk' if !$::auto_install;
- 
-    if ($o->{interactive} eq "gtk" && availableMemory < 22 * 1024) {
- 	log::l("switching to newt install cuz not enough memory");
- 	$o->{interactive} = "newt";
-    }
-    require"install_steps_$o->{interactive}.pm" if $o->{interactive}; #- no space to skip perl2fcalls
-
-    #- needed before accessing floppy (in case of usb floppy)
-    $::noauto or modules::load_category('bus/usb'); 
-
-    #- patch should be read after defcfg in order to take precedance.
-    eval { $o = $::o = install_any::loadO($o, $cfg) } if $cfg;
-    eval { $o = $::o = install_any::loadO($o, "patch") } if $patch;
-
-    eval { modules::load("af_packet") };
-
-    map_index {
-	modules::add_alias("sound-slot-$::i", $_->{driver});
-    } modules::probe_category('multimedia/sound');
-
-    #- needed very early for install_steps_gtk
-    eval { ($o->{mouse}, @{$o->{wacom} = []}) = mouse::detect() } unless $o->{nomouseprobe} || $o->{mouse};
-
-    $o->{lang} = lang::set($o->{lang}) if $o->{lang} ne 'en_US'; #- mainly for defcfg
-
-    start_i810fb();
-
-    $o->{allowFB} = listlength(cat_("/proc/fb"));
-
-    my $VERSION = cat__(install_any::getFile("VERSION")) or do { print "VERSION file missing\n"; sleep 5 };
-    $o->{lnx4win} = 1 if $VERSION =~ /lnx4win/i;
-    $o->{meta_class} = 'desktop' if $VERSION =~ /desktop/i;
-    $o->{meta_class} = 'firewall' if $VERSION =~ /firewall/i;
-    $o->{meta_class} = 'server' if $VERSION =~ /server/i;
-    if ($::oem) {
-	$o->{partitioning}{use_existing_root} = 1;
-	$o->{compssListLevel} = 4;
-	push @auto, 'selectInstallClass', 'doPartitionDisks', 'choosePackages', 'configureTimezone', 'exitInstall';
-    }
-
-    foreach (@auto) {
-	my $s = $o->{steps}{/::(.*)/ ? $1 : $_} or next;
-	$s->{auto} = $s->{hidden} = 1;
-    }
-
-    my $o_;
-    while (1) {
-    	$o_ = $::auto_install ?
-    	  install_steps_auto_install->new($o) :
-    	    $o->{interactive} eq "stdio" ?
-    	  install_steps_stdio->new($o) :
-    	    $o->{interactive} eq "newt" ?
-    	  install_steps_newt->new($o) :
-    	    $o->{interactive} eq "gtk" ?
-    	  install_steps_gtk->new($o) :
-    	    die "unknown install type";
-	$o_ and last;
-
-	$o->{interactive} = "newt";
-	require install_steps_newt;
-    }
-    $::o = $o = $o_;
-
-    install_any::remove_unused() if common::usingRamdisk();
-
-    #-the main cycle
-    my $clicked = 0;
-    MAIN: for ($o->{step} = $o->{steps}{first};; $o->{step} = getNextStep()) {
-	$o->{steps}{$o->{step}}{entered}++;
-	$o->enteringStep($o->{step});
-	if ($o->{steps}{$o->{step}}{icon}) { $o->{icon} = $o->{steps}{$o->{step}}{icon} } else { undef $o->{icon} }
-	eval {
-	    &{$install2::{$o->{step}}}($clicked || $o->{steps}{$o->{step}}{noauto},
-				       $o->{steps}{$o->{step}}{entered},
-				       $clicked ? 0 : $o->{steps}{$o->{step}}{auto});
-	};
-	my $err = $@;
-	$o->kill_action;
-	$clicked = 0;
-	if ($err) {
-	    local $_ = $err;
-	    $o->kill_action;
-	    if (/^setstep (.*)/) {
-		$o->{step} = $1;
-		$o->{steps}{$1}{done} = 0;
-		$clicked = 1;
-		redo MAIN;
-	    }
-	    /^theme_changed$/ and redo MAIN;
-	    unless (/^already displayed/) {
-		eval { $o->errorInStep($_) };
-		$o->{steps}{$o->{step}}{auto} = 0;
-		$err = $@;
-		$err and next;
-	    }
-	    $o->{step} = $o->{steps}{$o->{step}}{onError};
-	    next MAIN unless $o->{steps}{$o->{step}}{reachable}; #- sanity check: avoid a step not reachable on error.
-	    redo MAIN;
-	}
-	$o->{steps}{$o->{step}}{done} = 1;
-	$o->leavingStep($o->{step});
-
-	last if $o->{step} eq 'exitInstall';
-    }
-    install_any::clean_postinstall_rpms();
-    install_any::log_sizes($o);
-    install_any::remove_advertising($o);
-    install_any::write_fstab($o);
-    modules::write_conf($o->{prefix});
-
-    #- mainly for auto_install's
-    #- do not use run_program::xxx because it doesn't leave stdin/stdout unchanged
-    system("bash", "-c", $o->{postInstallNonRooted}) if $o->{postInstallNonRooted};
-    system("chroot", $o->{prefix}, "bash", "-c", $o->{postInstall}) if $o->{postInstall};
-
-    install_any::ejectCdrom();
-
-    #- to ensure linuxconf doesn't cry against those files being in the future
-    foreach ('/etc/modules.conf', '/etc/crontab', '/etc/sysconfig/mouse', '/etc/sysconfig/network', '/etc/X11/fs/config') {
-	my $now = time - 24 * 60 * 60;
-	utime $now, $now, "$o->{prefix}/$_";
-    }
-    $::live or install_any::killCardServices();
-
-    #- make sure failed upgrade will not hurt too much.
-    install_steps::cleanIfFailedUpgrade($o);
-
-    -e "$o->{prefix}/usr/sbin/urpmi.update" or eval { rm_rf("$o->{prefix}/var/lib/urpmi") };
-
-    #- copy latest log files
-    eval { cp_af("/tmp/$_", "$o->{prefix}/root/drakx") foreach qw(ddebug.log stage1.log) };
-
-    #- ala pixel? :-) [fpons]
-    common::sync(); common::sync();
-
-    log::l("installation complete, leaving");
-    log::l("files still open by install2: ", readlink($_)) foreach glob_("/proc/self/fd/*");
-    print "\n" x 80;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/install_any.pm b/perl-install/install_any.pm
deleted file mode 100644
index 78283cf96..000000000
--- a/perl-install/install_any.pm
+++ /dev/null
@@ -1,1149 +0,0 @@
-package install_any; # $Id$
-
-use diagnostics;
-use strict;
-
-use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK $boot_medium @advertising_images);
-
-@ISA = qw(Exporter);
-%EXPORT_TAGS = (
-    all => [ qw(getNextStep spawnShell addToBeDone) ],
-);
-@EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::System;
-use common;
-use run_program;
-use partition_table qw(:types);
-use partition_table_raw;
-use devices;
-use fsedit;
-use modules;
-use detect_devices;
-use lang;
-use any;
-use log;
-use fs;
-
-#- boot medium (the first medium to take into account).
-$boot_medium = 1;
-
-#-######################################################################################
-#- Media change variables&functions
-#-######################################################################################
-my $postinstall_rpms = '';
-my $current_medium = $boot_medium;
-my $asked_medium = $boot_medium;
-my $cdrom = undef;
-sub useMedium($) {
-    #- before ejecting the first CD, there are some files to copy!
-    #- does nothing if the function has already been called.
-    $_[0] > 1 and $::o->{method} eq 'cdrom' and setup_postinstall_rpms($::o->{prefix}, $::o->{packages});
-
-    $asked_medium eq $_[0] or log::l("selecting new medium '$_[0]'");
-    $asked_medium = $_[0];
-}
-sub changeMedium($$) {
-    my ($method, $medium) = @_;
-    log::l("change to medium $medium for method $method (refused by default)");
-    0;
-}
-sub relGetFile($) {
-    local $_ = $_[0];
-    m|\.rpm$| ? "$::o->{packages}{mediums}{$asked_medium}{rpmsdir}/$_" : $_;
-}
-sub askChangeMedium($$) {
-    my ($method, $medium) = @_;
-    my $allow;
-    do {
-	eval { $allow = changeMedium($method, $medium) };
-    } while ($@); #- really it is not allowed to die in changeMedium!!! or install will cores with rpmlib!!!
-    log::l($allow ? "accepting medium $medium" : "refusing medium $medium");
-    $allow;
-}
-sub errorOpeningFile($) {
-    my ($file) = @_;
-    $file eq 'XXX' and return; #- special case to force closing file after rpmlib transaction.
-    $current_medium eq $asked_medium and log::l("errorOpeningFile $file"), return; #- nothing to do in such case.
-    $::o->{packages}{mediums}{$asked_medium}{selected} or return; #- not selected means no need for worying about.
-
-    my $max = 32; #- always refuse after $max tries.
-    if ($::o->{method} eq "cdrom") {
-	cat_("/proc/mounts") =~ m,(/(?:dev|tmp)/\S+)\s+(?:/mnt/cdrom|/tmp/image), and $cdrom = $1;
-	return unless $cdrom;
-	ejectCdrom($cdrom);
-	while ($max > 0 && askChangeMedium($::o->{method}, $asked_medium)) {
-	    $current_medium = $asked_medium;
-	    eval { fs::mount($cdrom, "/tmp/image", "iso9660", 'readonly') };
-	    my $getFile = getFile($file); 
-	    $getFile && @advertising_images and copy_advertising($::o);
-	    $getFile and return $getFile;
-	    $current_medium = 'unknown'; #- don't know what CD is inserted now.
-	    ejectCdrom($cdrom);
-	    --$max;
-	}
-    } else {
-	while ($max > 0 && askChangeMedium($::o->{method}, $asked_medium)) {
-	    $current_medium = $asked_medium;
-	    my $getFile = getFile($file); $getFile and return $getFile;
-	    $current_medium = 'unknown'; #- don't know what CD image has been copied.
-	    --$max;
-	}
-    }
-
-    #- keep in mind the asked medium has been refused on this way.
-    #- this means it is no more selected.
-    $::o->{packages}{mediums}{$asked_medium}{selected} = undef;
-
-    #- on cancel, we can expect the current medium to be undefined too,
-    #- this enable remounting if selecting a package back.
-    $current_medium = 'unknown';
-
-    return;
-}
-sub getFile {
-    my ($f, $method) = @_;
-    log::l("getFile $f:$method");
-    my $rel = relGetFile($f);
-    do {
-	if ($f =~ m|^http://|) {
-	    require http;
-	    http::getFile($f);
-	} elsif ($method =~ /crypto|update/i) {
-	    require crypto;
-	    crypto::getFile($f);
-	} elsif ($::o->{method} eq "ftp") {
-	    require ftp;
-	    ftp::getFile($rel);
-	} elsif ($::o->{method} eq "http") {
-	    require http;
-	    http::getFile("$ENV{URLPREFIX}/$rel");
-	} else {
-	    #- try to open the file, but examine if it is present in the repository, this allow
-	    #- handling changing a media when some of the file on the first CD has been copied
-	    #- to other to avoid media change...
-	    my $f2 = "$postinstall_rpms/$f";
-	    $f2 = "/tmp/image/$rel" unless $postinstall_rpms && -e $f2;
-	    open GETFILE, $f2 and *GETFILE;
-	}
-    } || errorOpeningFile($f);
-}
-sub getAndSaveFile {
-    my ($file, $local) = @_ == 1 ? ("Mandrake/mdkinst$_[0]", $_[0]) : @_;
-    local *F; open F, ">$local" or return;
-    local $/ = \ (16 * 1024);
-    my $f = ref($file) ? $file : getFile($file) or return;
-    local $_;
-    while (<$f>) { syswrite F, $_ }
-    1;
-}
-
-
-#-######################################################################################
-#- Post installation RPMS from cdrom only, functions
-#-######################################################################################
-sub setup_postinstall_rpms($$) {
-    my ($prefix, $packages) = @_;
-
-    $postinstall_rpms and return;
-    $postinstall_rpms = "$prefix/usr/postinstall-rpm";
-
-    require pkgs;
-
-    log::l("postinstall rpms directory set to $postinstall_rpms");
-    clean_postinstall_rpms(); #- make sure in case of previous upgrade problem.
-    mkdir_p($postinstall_rpms);
-
-    my %toCopy;
-    #- compute closure of package that may be copied, use INSTALL category
-    #- in rpmsrate.
-    foreach (@{$packages->{needToCopy} || []}) {
-	my $p = pkgs::packageByName($packages, $_);
-	pkgs::selectPackage($packages, $p, 0, \%toCopy);
-    }
-
-    my @toCopy = grep { $_ && pkgs::packageFlagSelected($_) == 0 } map { pkgs::packageByName($packages, $_) } keys %toCopy;
-
-    #- extract headers of package, this is necessary for getting
-    #- the complete filename of each package.
-    #- copy the package files in the postinstall RPMS directory.
-    #- last arg is default medium '' known as the CD#1.
-    #- cp_af doesn't handle correctly a missing file.
-    eval { cp_af((grep { -r $_ } map { "/tmp/image/" . relGetFile(pkgs::packageFile($_)) } @toCopy), $postinstall_rpms) };
-
-    log::l("copying Auto Install Floppy");
-    getAndSaveInstallFloppy($::o, "$postinstall_rpms/auto_install.img");
-}
-
-sub clean_postinstall_rpms() {
-    $postinstall_rpms and -d $postinstall_rpms and rm_rf($postinstall_rpms);
-}
-
-
-#-######################################################################################
-#- Specific Hardware to take into account and associated rpms to install
-#-######################################################################################
-sub allowNVIDIA_rpms {
-    my ($packages) = @_;
-    require pkgs;
-    if (pkgs::packageByName($packages, "NVIDIA_GLX")) {
-	#- at this point, we can allow using NVIDIA 3D acceleration packages.
-	my @rpms;
-	foreach (keys %{$packages->{names}}) {
-	    my ($ext, $version, $release) = /kernel[^-]*(-smp|-enterprise|-secure)?(?:-(\d.*?)\.(\d+mdk))?$/ or next;
-	    my $p = pkgs::packageByName($packages, $_);
-	    pkgs::packageSelectedOrInstalled($p) or next;
-	    $version or ($version, $release) = (pkgs::packageVersion($p), pkgs::packageRelease($p));
-	    my $name = "NVIDIA_kernel-$version-$release$ext";
-	    pkgs::packageByName($packages, $name) or return;
-	    push @rpms, $name;
-	}
-	@rpms > 0 or return;
-	return [ @rpms, "NVIDIA_GLX" ];
-    }
-}
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub kernelVersion {
-    my ($o) = @_;
-    my $kernel = readlink "$o->{prefix}/boot/vmlinuz" || first(all("$o->{prefix}/boot"));
-    first($kernel =~ /vmlinuz-(.*)/);
-}
-
-
-sub getNextStep {
-    my ($s) = $::o->{steps}{first};
-    $s = $::o->{steps}{$s}{next} while $::o->{steps}{$s}{done} || !$::o->{steps}{$s}{reachable};
-    $s;
-}
-
-sub spawnShell {
-    return if $::o->{localInstall} || $::testing;
-
-    -x "/bin/sh" or die "cannot open shell - /bin/sh doesn't exist";
-
-    fork and return;
-
-    $ENV{DISPLAY} ||= ":0"; #- why not :pp
-
-    local *F;
-    sysopen F, "/dev/tty2", 2 or die "cannot open /dev/tty2 -- no shell will be provided";
-
-    open STDIN, "<&F" or die '';
-    open STDOUT, ">&F" or die '';
-    open STDERR, ">&F" or die '';
-    close F;
-
-    print any::drakx_version(), "\n";
-
-    c::setsid();
-
-    ioctl(STDIN, c::TIOCSCTTY(), 0) or warn "could not set new controlling tty: $!";
-
-    my $busybox = "/usr/bin/busybox";
-    exec {-e $busybox ? $busybox : "/bin/sh"} "/bin/sh" or log::l("exec of /bin/sh failed: $!");
-}
-
-sub getAvailableSpace {
-    my ($o) = @_;
-
-    #- make sure of this place to be available for installation, this could help a lot.
-    #- currently doing a very small install use 36Mb of postinstall-rpm, but installing
-    #- these packages may eat up to 90Mb (of course not all the server may be installed!).
-    #- 65mb may be a good choice to avoid almost all problem of insuficient space left...
-    my $minAvailableSize = 65 * sqr(1024);
-
-    my $n = !$::testing && getAvailableSpace_mounted($o->{prefix}) || 
-            getAvailableSpace_raw($o->{fstab}) * 512 / 1.07;
-    $n - max(0.1 * $n, $minAvailableSize);
-}
-
-sub getAvailableSpace_mounted {
-    my ($prefix) = @_;
-    my $dir = -d "$prefix/usr" ? "$prefix/usr" : "$prefix";
-    my (undef, $free) = MDK::Common::System::df($dir) or return;
-    log::l("getAvailableSpace_mounted $free KB");
-    $free * 1024 || 1;
-}
-sub getAvailableSpace_raw {
-    my ($fstab) = @_;
-
-    do { $_->{mntpoint} eq '/usr' and return $_->{size} } foreach @$fstab;
-    do { $_->{mntpoint} eq '/'    and return $_->{size} } foreach @$fstab;
-
-    if ($::testing) {
-	my $nb = 450;
-	log::l("taking ${nb}MB for testing");
-	return $nb << 11;
-    }
-    die "missing root partition";
-}
-
-sub preConfigureTimezone {
-    my ($o) = @_;
-    require timezone;
-   
-    #- can't be done in install cuz' timeconfig %post creates funny things
-    add2hash($o->{timezone}, { timezone::read($o->{prefix}) }) if $o->{isUpgrade};
-
-    $o->{timezone}{timezone} ||= timezone::bestTimezone(lang::lang2text($o->{lang}));
-
-    my $utc = $::expert && !grep { isFat($_) || isNT($_) } @{$o->{fstab}};
-    my $ntp = timezone::ntp_server($o->{prefix});
-    add2hash_($o->{timezone}, { UTC => $utc, ntp => $ntp });
-}
-
-sub setPackages {
-    my ($o) = @_;
-
-    require pkgs;
-    if (!$o->{packages} || is_empty_hash_ref($o->{packages}{names})) {
-	$o->{packages} = pkgs::psUsingHdlists($o->{prefix}, $o->{method});
-
-	pkgs::getDeps($o->{prefix}, $o->{packages});
-	pkgs::selectPackage($o->{packages},
-			    pkgs::packageByName($o->{packages}, 'basesystem') || die("missing basesystem package"), 1);
-
-	#- must be done after selecting base packages (to save memory)
-	pkgs::getProvides($o->{packages});
-
-	#- must be done after getProvides
-	pkgs::read_rpmsrate($o->{packages}, getFile("Mandrake/base/rpmsrate"));
-	($o->{compssUsers}, $o->{compssUsersSorted}) = pkgs::readCompssUsers($o->{meta_class});
-
-	#- preselect default_packages and compssUsersChoices.
-	setDefaultPackages($o);
-    } else {
-	#- this has to be done to make sure necessary files for urpmi are
-	#- present.
-	pkgs::psUpdateHdlistsDeps($o->{prefix}, $o->{method}, $o->{packages});
-    }
-}
-
-sub setDefaultPackages {
-    my ($o, $clean) = @_;
-
-    if ($clean) {
-	delete $o->{$_} foreach qw(default_packages compssUsersChoice); #- clean modified variables.
-    }
-
-    push @{$o->{default_packages}}, "nfs-utils-clients" if $o->{method} eq "nfs";
-    push @{$o->{default_packages}}, "numlock" if $o->{miscellaneous}{numlock};
-    push @{$o->{default_packages}}, "kernel22" if !$::oem && c::kernel_version() =~ /^\Q2.2/;
-    push @{$o->{default_packages}}, "raidtools" if !is_empty_array_ref($o->{all_hds}{raids});
-    push @{$o->{default_packages}}, "lvm" if !is_empty_array_ref($o->{all_hds}{lvms});
-    push @{$o->{default_packages}}, "alsa", "alsa-utils" if modules::get_alias("sound-slot-0") =~ /^snd-card-/;
-    push @{$o->{default_packages}}, uniq(grep {$_} map { fsedit::package_needed_for_partition_type($_) } @{$o->{fstab}});
-
-    #- if no cleaning needed, populate by default, clean is used for second or more call to this function.
-    unless ($clean) {
-	if ($::auto_install && ($o->{compssUsersChoice} || {})->{ALL}) {
-	    $o->{compssUsersChoice}{$_} = 1 foreach map { @{$o->{compssUsers}{$_}{flags}} } @{$o->{compssUsersSorted}};
-	}
-	if (!$o->{compssUsersChoice} && !$o->{isUpgrade}) {
-	    #- by default, choose:
-	    if ($o->{meta_class} eq 'server') {
-		$o->{compssUsersChoice}{$_} = 1 foreach 'X', 'MONITORING', 'NETWORKING_REMOTE_ACCESS_SERVER';
-	    } else {
-		$o->{compssUsersChoice}{$_} = 1 foreach 'GNOME', 'KDE', 'CONFIG', 'X';
-		$o->{lang} eq 'eu_ES' and $o->{compssUsersChoice}{KDE} = 0;
-		$o->{compssUsersChoice}{$_} = 1
-		  foreach map { @{$o->{compssUsers}{$_}{flags}} } 'Workstation|Office Workstation', 'Workstation|Internet station';
-	    }
-	}
-    }
-    $o->{compssUsersChoice}{uc($_)} = 1 foreach grep { modules::probe_category("multimedia/$_") } modules::sub_categories('multimedia');
-    $o->{compssUsersChoice}{uc($_)} = 1 foreach map { $_->{driver} =~ /Flag:(.*)/ } detect_devices::probeall();
-    $o->{compssUsersChoice}{SYSTEM} = 1;
-    $o->{compssUsersChoice}{DOCS} = !$o->{excludedocs};
-    $o->{compssUsersChoice}{BURNER} = 1 if detect_devices::burners();
-    $o->{compssUsersChoice}{DVD} = 1 if detect_devices::dvdroms();
-    $o->{compssUsersChoice}{USB} = 1 if modules::get_alias("usb-interface");
-    $o->{compssUsersChoice}{PCMCIA} = 1 if detect_devices::hasPCMCIA();
-    $o->{compssUsersChoice}{HIGH_SECURITY} = 1 if $o->{security} > 3;
-    $o->{compssUsersChoice}{BIGMEM} = 1 if !$::oem && (availableRamMB() > 800) && (arch() !~ /ia64/);
-    $o->{compssUsersChoice}{SMP} = 1 if detect_devices::hasSMP();
-    $o->{compssUsersChoice}{'3D'} = 1 if 
-      detect_devices::matching_desc('Matrox.* G[245][05]0') ||
-      detect_devices::matching_desc('Rage X[CL]') ||
-      detect_devices::matching_desc('3D Rage (?:LT|Pro)') ||
-      detect_devices::matching_desc('Voodoo [35]') ||
-      detect_devices::matching_desc('Voodoo Banshee') ||
-      detect_devices::matching_desc('8281[05].* CGC') ||
-      detect_devices::matching_desc('Rage 128') ||
-      detect_devices::matching_desc('Radeon ') && !detect_devices::matching_desc('Radeon 8500') ||
-      detect_devices::matching_desc('[nN]Vidia.*T[nN]T2') || #- TNT2 cards
-      detect_devices::matching_desc('[nN]Vidia.*NV[56]') ||
-      detect_devices::matching_desc('[nN]Vidia.*Vanta') ||
-      detect_devices::matching_desc('[nN]Vidia.*GeForce') || #- GeForce cards
-      detect_devices::matching_desc('[nN]Vidia.*NV1[15]') ||
-      detect_devices::matching_desc('[nN]Vidia.*Quadro');
-
-
-    foreach (map { substr($_, 0, 2) } lang::langs($o->{langs})) {
-	pkgs::packageByName($o->{packages}, "locales-$_") or next;
-	push @{$o->{default_packages}}, "locales-$_";
-	$o->{compssUsersChoice}{qq(LOCALES"$_")} = 1; #- mainly for zh in case of zh_TW.Big5
-    }
-    foreach (lang::langsLANGUAGE($o->{langs})) {
-	$o->{compssUsersChoice}{qq(LOCALES"$_")} = 1;
-    }
-    $o->{compssUsersChoice}{'CHARSET"' . lang::lang2charset($o->{lang}) . '"'} = 1;
-}
-
-sub unselectMostPackages {
-    my ($o) = @_;
-    pkgs::unselectAllPackages($o->{packages});
-    pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_) || next) foreach @{$o->{default_packages}};
-}
-
-sub warnAboutNaughtyServers {
-    my ($o) = @_;
-    my @naughtyServers = pkgs::naughtyServers($o->{packages}) or return 1;
-    if (!$o->ask_yesorno('', 
-formatAlaTeX(_("You have selected the following server(s): %s
-
-
-These servers are activated by default. They don't have any known security
-issues, but some new could be found. In that case, you must make sure to upgrade
-as soon as possible.
-
-
-Do you really want to install these servers?
-", join(", ", @naughtyServers))), 1)) {
-	pkgs::unselectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_)) foreach @naughtyServers;
-    }
-}
-
-sub addToBeDone(&$) {
-    my ($f, $step) = @_;
-
-    return &$f() if $::o->{steps}{$step}{done};
-
-    push @{$::o->{steps}{$step}{toBeDone}}, $f;
-}
-
-sub setAuthentication {
-    my ($o) = @_;
-    my ($shadow, $md5, $ldap, $nis) = @{$o->{authentication} || {}}{qw(shadow md5 LDAP NIS)};
-    my $p = $o->{prefix};
-    #- obsoleted always enabled (in /etc/pam.d/system-auth furthermore) #any::enableMD5Shadow($p, $shadow, $md5);
-    any::enableShadow($p) if $shadow;
-    if ($ldap) {
-	$o->pkg_install(qw(chkauth openldap-clients nss_ldap pam_ldap));
-	run_program::rooted($o->{prefix}, "/usr/sbin/chkauth", "ldap", "-D", $o->{netc}{LDAPDOMAIN}, "-s", $ldap);
-    } elsif ($nis) {
-	#$o->pkg_install(qw(chkauth ypbind yp-tools net-tools));
-	#run_program::rooted($o->{prefix}, "/usr/sbin/chkauth", "yp", $domain, "-s", $nis);
-	$o->pkg_install("ypbind");
-	my $domain = $o->{netc}{NISDOMAIN};
-	$domain || $nis ne "broadcast" or die _("Can't use broadcast with no NIS domain");
-	my $t = $domain ? "domain $domain" . ($nis ne "broadcast" && " server")
-	                : "ypserver";
-	substInFile {
-	    $_ = "#~$_" unless /^#/;
-	    $_ .= "$t $nis\n" if eof;
-	} "$p/etc/yp.conf";
-	require network;
-	network::write_conf("$p/etc/sysconfig/network", $o->{netc});
-    }
-}
-
-sub killCardServices {
-    my $pid = chomp_(cat_("/tmp/cardmgr.pid"));
-    $pid and kill(15, $pid); #- send SIGTERM
-}
-
-sub unlockCdrom(;$) {
-    my ($cdrom) = @_;
-    $cdrom or cat_("/proc/mounts") =~ m,(/(?:dev|tmp)/\S+)\s+(?:/mnt/cdrom|/tmp/image), and $cdrom = $1;
-    eval { $cdrom and ioctl detect_devices::tryOpen($1), c::CDROM_LOCKDOOR(), 0 };
-}
-sub ejectCdrom(;$) {
-    my ($cdrom) = @_;
-    getFile("XXX"); #- close still opened filehandle
-    $cdrom ||= $1 if cat_("/proc/mounts") =~ m,(/(?:dev|tmp)/\S+)\s+(?:/mnt/cdrom|/tmp/image),;
-    if ($cdrom) {
-	#- umount BEFORE opening the cdrom device otherwise the umount will
-	#- D state if the cdrom is already removed
-	eval { fs::umount("/tmp/image") };
-	if ($@) { log::l("files still open: ", readlink($_)) foreach map { glob_("$_/fd/*") } glob_("/proc/*") }
-	eval { ioctl detect_devices::tryOpen($cdrom), c::CDROMEJECT(), 1 };	
-    }
-}
-
-sub setupFB {
-    my ($o, $vga) = @_;
-
-    $vga ||= 785; #- assume at least 640x480x16.
-
-    require bootloader;
-    #- update bootloader entries with vga, all kernel are now framebuffer.
-    foreach (qw(vmlinuz vmlinuz-secure vmlinuz-smp vmlinuz-hack)) {
-	if (my $e = bootloader::get("/boot/$_", $o->{bootloader})) {
-	    $e->{vga} = $vga;
-	}
-    }
-    bootloader::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{all_hds}{hds});
-    1;
-}
-
-sub hdInstallPath() {
-    my $tail = first(readlink("/tmp/image") =~ m|^/tmp/hdimage/(.*)|);
-    my $head = first(readlink("/tmp/hdimage") =~ m|$::o->{prefix}(.*)|);
-    $tail && ($head ? "$head/$tail" : "/mnt/hd/$tail");
-}
-
-sub install_urpmi {
-    my ($prefix, $method, $mediums) = @_;
-
-    #- rare case where urpmi cannot be installed (no hd install path).
-    $method eq 'disk' && !hdInstallPath() and return;
-
-    my @cfg = map {
-	my $name = $_->{fakemedium};
-
-	local *LIST;
-	my $mask = umask 077;
-	open LIST, ">$prefix/var/lib/urpmi/list.$name" or log::l("failed to write list.$name");
-	umask $mask;
-
-	my $dir = ($_->{prefix} || ${{ nfs => "file://mnt/nfs", 
-				       disk => "file:/" . hdInstallPath(),
-				       ftp => $ENV{URLPREFIX},
-				       http => $ENV{URLPREFIX},
-				       cdrom => "removable://mnt/cdrom" }}{$method}) . "/$_->{rpmsdir}";
-
-	local *FILES; open FILES, "$ENV{LD_LOADER} parsehdlist /tmp/$_->{hdlist} |";
-	print LIST "$dir/$_\n" foreach chomp_(<FILES>);
-	close FILES or log::l("parsehdlist failed"), return;
-	close LIST;
-
-	#- build synthesis file if there are still not existing (ie not copied from mirror).
-	if (-s "$prefix/var/lib/urpmi/synthesis.hdlist.$name.cz" <= 32) {
-	    unlink "$prefix/var/lib/urpmi/synthesis.hdlist.$name.cz";
-	    run_program::rooted($prefix, "parsehdlist", ">", "/var/lib/urpmi/synthesis.hdlist.$name",
-				"--synthesis", "/var/lib/urpmi/hdlist.$name.cz");
-	    run_program::rooted($prefix, "gzip", "-S", ".cz", "/var/lib/urpmi/synthesis.hdlist.$name");
-	}
-
-	my ($qname, $qdir) = ($name, $dir);
-	$qname =~ s/(\s)/\\$1/g; $qdir =~ s/(\s)/\\$1/g;
-
-	#- output new urpmi.cfg format here.
-	"$qname " . ($dir !~ /^(ftp|http)/ && $qdir) . " {
-  hdlist: hdlist.$name.cz
-  with_hdlist: ../base/" . ($_->{update} ? "hdlist.cz" : $_->{hdlist}) . "
-  list: list.$name" . ($dir =~ /removable:/ && "
-  removable: /dev/cdrom") . ($_->{update} && "
-  update") . "
-}
-
-";
-    } sort { $a->{medium} <=> $b->{medium} } values %$mediums;
-    eval { output "$prefix/etc/urpmi/urpmi.cfg", @cfg };
-}
-
-
-#-###############################################################################
-#- kde stuff
-#-###############################################################################
-sub kderc_largedisplay {
-    my ($prefix) = @_;
-
-    update_gnomekderc($_, 'KDE', 
-		     Contrast => 7,
-		     kfmIconStyle => "Large",
-		     kpanelIconStyle => "Normal", #- to change to Large when icons looks better
-		     KDEIconStyle => "Large") foreach list_skels($prefix, '.kderc');
-
-    substInFile {
-	s/^(GridWidth)=85/$1=100/;
-	s/^(GridHeight)=70/$1=75/;
-    } $_ foreach list_skels($prefix, '.kde/share/config/kfmrc');
-}
-
-sub kdeicons_postinstall {
-    my ($prefix) = @_;
-
-    #- parse etc/fstab file to search for dos/win, floppy, zip, cdroms icons.
-    #- handle both supermount and fsdev usage.
-    my %l = (
-	     'cdrom' => [ 'cdrom', 'Cd-Rom' ],
-	     'zip' => [ 'zip', 'Zip' ],
-	     'floppy-ls' => [ 'floppy', 'LS-120' ],
-	     'floppy' => [ 'floppy', 'Floppy' ],
-    );
-    foreach (fs::read_fstab($prefix, "/etc/fstab")) {
-
-	my ($name_, $nb) = $_->{mntpoint} =~ m|.*/(\S+?)(\d*)$/|;
-	my ($name, $text) = @{$l{$name_} || []};
-
-	my $f = ${{
-	    supermount => sub { $name .= '.fsdev' if $name },
-	    vfat => sub { $name = 'Dos_'; $text = $name_ },
-	}}{$_->{type}};
-	&$f if $f;
-
-	template2userfile($prefix, 
-			  "$ENV{SHARE_PATH}/$name.kdelnk.in",
-			  "Desktop/$text" .  ($nb && " $nb"). ".kdelnk",
-			  1, %$_) if $name;
-    }
-
-    # rename the .kdelnk to the name found in the .kdelnk as kde doesn't use it
-    # for displaying
-    foreach my $dir (grep { -d $_ } list_skels($prefix, 'Desktop')) {
-	foreach (grep { /\.kdelnk$/ } all($dir)) {
-	    cat_("$dir/$_") =~ /^Name\[\Q$ENV{LANG}\E\]=(.{2,14})$/m
-	      and rename "$dir/$_", "$dir/$1.kdelnk";
-	}
-    }
-}
-
-sub kdemove_desktop_file {
-    my ($prefix) = @_;
-    my @toMove = qw(doc.kdelnk news.kdelnk updates.kdelnk home.kdelnk printer.kdelnk floppy.kdelnk cdrom.kdelnk FLOPPY.kdelnk CDROM.kdelnk);
-
-    #- remove any existing save in Trash of each user and
-    #- move appropriate file there after an upgrade.
-    foreach my $dir (grep { -d $_ } list_skels($prefix, 'Desktop')) {
-	renamef("$dir/$_", "$dir/Trash/$_") 
-	  foreach grep { -e "$dir/$_" } @toMove, grep { /\.rpmorig$/ } all($dir)
-    }
-}
-
-
-#-###############################################################################
-#- auto_install stuff
-#-###############################################################################
-sub auto_inst_file() { ($::g_auto_install ? "/tmp" : "$::o->{prefix}/root/drakx") . "/auto_inst.cfg.pl" }
-
-sub report_bug {
-    my ($prefix) = @_;
-    any::report_bug($prefix, 'auto_inst' => g_auto_install('', 1));
-}
-
-sub g_auto_install {
-    my ($replay, $respect_privacy) = @_;
-    my $o = {};
-
-    require pkgs;
-    $o->{default_packages} = pkgs::selected_leaves($::o->{packages});
-
-    my @fields = qw(mntpoint type size);
-    $o->{partitions} = [ map { my %l; @l{@fields} = @$_{@fields}; \%l } grep { $_->{mntpoint} } @{$::o->{fstab}} ];
-    
-    exists $::o->{$_} and $o->{$_} = $::o->{$_} foreach qw(lang authentication mouse wacom netc timezone superuser intf keyboard users partitioning isUpgrade manualFstab nomouseprobe crypto security netcnx useSupermount autoExitInstall mkbootdisk); #- TODO modules bootloader 
-
-    if (my $printer = $::o->{printer}) {
-	$o->{printer}{$_} = $::o->{printer}{$_} foreach qw(SPOOLER DEFAULT BROWSEPOLLADDR BROWSEPOLLPORT MANUALCUPSCONFIG);
-	$o->{printer}{configured} = {};
-	foreach my $queue (keys %{$::o->{printer}{configured}}) {
-	    my $val = $::o->{printer}{configured}{$queue}{queuedata};
-	    exists $val->{$_} and $o->{printer}{configured}{$queue}{queuedata}{$_} = $val->{$_} foreach keys %{$val || {}};
-	}
-    }
-
-    if (my $card = $::o->{X}{card}) {
-	$o->{X}{$_} = $::o->{X}{$_} foreach qw(default_depth resolution_wanted);
-	if ($o->{X}{default_depth} and my $depth = $card->{depth}{$o->{X}{default_depth}}) {
-	    $depth ||= [];
-	    $o->{X}{resolution_wanted} ||= join "x", @{$depth->[0]} unless is_empty_array_ref($depth->[0]);
-	    $o->{X}{monitor} = $::o->{X}{monitor} if $::o->{X}{monitor}{manual};
-	}
-    }
-
-    local $o->{partitioning}{auto_allocate} = !$replay;
-    $o->{autoExitInstall} = !$replay;
-    $o->{interactiveSteps} = [ 'doPartitionDisks', 'formatPartitions'] if $replay;
-
-    #- deep copy because we're modifying it below
-    $o->{users} = [ @{$o->{users} || []} ];
-
-    my @user_info_to_remove = (
-	if_($respect_privacy, qw(name realname home pw)), 
-	qw(oldu oldg password password2),
-    );
-    $_ = { %{$_ || {}} }, delete @$_{@user_info_to_remove} foreach $o->{superuser}, @{$o->{users} || []};
-
-    if ($respect_privacy && $o->{netcnx}) {
-	if (my $type = $o->{netcnx}{type}) {
-	    my @netcnx_type_to_remove = qw(passwd passwd2 login phone_in phone_out);
-	    $_ = { %{$_ || {}} }, delete @$_{@netcnx_type_to_remove} foreach $o->{netcnx}{$type};
-	}
-    }
-    
-    require Data::Dumper;
-    my $str = join('', 
-"#!/usr/bin/perl -cw
-#
-# You should check the syntax of this file before using it in an auto-install.
-# You can do this with 'perl -cw auto_inst.cfg.pl' or by executing this file
-# (note the '#!/usr/bin/perl -cw' on the first line).
-", Data::Dumper->Dump([$o], ['$o']), "\0");
-    $str =~ s/ {8}/\t/g; #- replace all 8 space char by only one tabulation, this reduces file size so much :-)
-    $str;
-}
-
-sub getAndSaveInstallFloppy {
-    my ($o, $where) = @_;
-    if ($postinstall_rpms && -d $postinstall_rpms && -r "$postinstall_rpms/auto_install.img") {
-	log::l("getAndSaveInstallFloppy: using file saved as $postinstall_rpms/auto_install.img");
-	cp_af("$postinstall_rpms/auto_install.img", $where);
-    } else {
-	my $image = cat_("/proc/cmdline") =~ /pcmcia/ ? "pcmcia" :
-	  ${{ disk => 'hd', cdrom => 'cdrom', ftp => 'network', nfs => 'network', http => 'network' }}{$o->{method}};
-	$image .= arch() =~ /sparc64/ && "64"; #- for sparc64 there are a specific set of image.
-	getAndSaveFile("images/$image.img", $where) or log::l("failed to write Install Floppy ($image.img) to $where"), return;
-    }
-    1;
-}
-
-sub getAndSaveAutoInstallFloppy {
-    my ($o, $replay, $where) = @_;
-
-    eval { modules::load('loop') };
-
-    if (arch() =~ /sparc/) {
-	my $imagefile = "$o->{prefix}/tmp/autoinst.img";
-	my $mountdir = "$o->{prefix}/tmp/mount"; -d $mountdir or mkdir $mountdir, 0755;
-	my $workdir = "$o->{prefix}/tmp/work"; -d $workdir or rmdir $workdir;
-
-	getAndSaveInstallFloppy($o, $imagefile) or return;
-        devices::make($_) foreach qw(/dev/loop6 /dev/ram);
-
-        run_program::run("losetup", "/dev/loop6", $imagefile);
-        fs::mount("/dev/loop6", $mountdir, "romfs", 'readonly');
-        cp_af($mountdir, $workdir);
-        fs::umount($mountdir);
-        run_program::run("losetup", "-d", "/dev/loop6");
-
-	substInFile { s/timeout.*//; s/^(\s*append\s*=\s*\".*)\"/$1 kickstart=floppy\"/ } "$workdir/silo.conf"; #" for po
-#-TODO	output "$workdir/ks.cfg", generate_ks_cfg($o);
-	output "$workdir/boot.msg", "\n7m",
-"!! If you press enter, an auto-install is going to start.
-    ALL data on this computer is going to be lost,
-    including any Windows partitions !!
-", "7m\n";
-
-	local $o->{partitioning}{clearall} = 1;
-	output("$workdir/auto_inst.cfg", g_auto_install());
-
-        run_program::run("genromfs", "-d", $workdir, "-f", "/dev/ram", "-A", "2048,/..", "-a", "512", "-V", "DrakX autoinst");
-        fs::mount("/dev/ram", $mountdir, 'romfs', 0);
-        run_program::run("silo", "-r", $mountdir, "-F", "-i", "/fd.b", "-b", "/second.b", "-C", "/silo.conf");
-        fs::umount($mountdir);
-	require commands;
-        commands::dd("if=/dev/ram", "of=$where", "bs=1440", "count=1024");
-
-        rm_rf($workdir, $mountdir, $imagefile);
-    } elsif (arch() =~ /ia64/) {
-	#- nothing yet
-    } else {
-	my $imagefile = "$o->{prefix}/root/autoinst.img";
-	my $mountdir = "$o->{prefix}/root/aif-mount"; -d $mountdir or mkdir $mountdir, 0755;
-
-	my $param = 'kickstart=floppy ' . generate_automatic_stage1_params($o);
-
-	getAndSaveInstallFloppy($o, $imagefile) or return;
-
-	my $dev = devices::set_loop($imagefile) or log::l("couldn't set loopback device"), return;
-        fs::mount($dev, $mountdir, 'vfat', 0);
-
-	substInFile { 
-	    s/timeout.*/$replay ? 'timeout 1' : ''/e;
-	    s/^(\s*append)/$1 $param/ 
-	} "$mountdir/syslinux.cfg";
-
-	unlink "$mountdir/help.msg";
-	output "$mountdir/boot.msg", "\n0c",
-"!! If you press enter, an auto-install is going to start.
-   All data on this computer is going to be lost,
-   including any Windows partitions !!
-", "07\n" if !$replay;
-
-	local $o->{partitioning}{clearall} = !$replay;
-	eval { output("$mountdir/auto_inst.cfg", g_auto_install($replay)); };
-	$@ and log::l("Warning: <$@>");
-
-	fs::umount($mountdir);
-	rmdir $mountdir;
-	devices::del_loop($dev);
-	require commands;
-	commands::dd("if=$imagefile", "of=$where", "bs=1440", "count=1024");
-	unlink $imagefile;
-    }
-    1;
-}
-
-
-sub g_default_packages {
-    my ($o, $quiet) = @_;
-
-    my $floppy = detect_devices::floppy();
-
-    while (1) {
-	$o->ask_okcancel('', _("Insert a FAT formatted floppy in drive %s", $floppy), 1) or return;
-
-	eval { fs::mount(devices::make($floppy), "/floppy", "vfat", 0) };
-	last if !$@;
-	$o->ask_warn('', _("This floppy is not FAT formatted"));
-    }
-
-    require Data::Dumper;
-    my $str = Data::Dumper->Dump([ { default_packages => pkgs::selected_leaves($o->{packages}) } ], ['$o']);
-    $str =~ s/ {8}/\t/g;
-    output('/floppy/auto_inst.cfg', 
-	   "# You should always check the syntax with 'perl -cw auto_inst.cfg.pl'\n",
-	   "# before testing.  To use it, boot with ``linux defcfg=floppy''\n",
-	   $str, "\0");
-    fs::umount("/floppy");
-
-    $quiet or $o->ask_warn('', _("To use this saved packages selection, boot installation with ``linux defcfg=floppy''"));
-}
-
-sub loadO {
-    my ($O, $f) = @_; $f ||= auto_inst_file;
-    my $o;
-    if ($f =~ /^(floppy|patch)$/) {
-	my $f = $f eq "floppy" ? 'auto_inst.cfg' : "patch";
-	unless ($::testing) {
-	    fs::mount(devices::make(detect_devices::floppy()), "/mnt", (arch() =~ /sparc/ ? "romfs" : "vfat"), 'readonly');
-	    $f = "/mnt/$f";
-	}
-	-e $f or $f .= '.pl';
-
-	my $b = before_leaving {
-	    fs::umount("/mnt") unless $::testing;
-	    modules::unload(qw(vfat fat));
-	};
-	$o = loadO($O, $f);
-    } else {
-	-e "$f.pl" and $f .= ".pl" unless -e $f;
-
-	my $fh = -e $f ? do { local *F; open F, $f; *F } : getFile($f) or die _("Error reading file %s", $f);
-	{
-	    local $/ = "\0";
-	    no strict;
-	    eval <$fh>;
-	    close $fh;
-	    $@ and die;
-	}
-	add2hash_($o ||= {}, $O);
-    }
-    bless $o, ref $O;
-}
-
-sub generate_automatic_stage1_params {
-    my ($o) = @_;
-
-    my @ks = "method:$o->{method}";
-
-    if ($o->{method} eq 'http') {
-	"$ENV{URLPREFIX}" =~ m|http://([^/:]+)/(.*)| or die;
-	push @ks, "server:$1", "directory:$2";
-    } elsif ($o->{method} eq 'ftp') {
-	push @ks,  "server:$ENV{HOST}", "directory:$ENV{PREFIX}", "user:$ENV{LOGIN}", "pass:$ENV{PASSWORD}";
-    } elsif ($o->{method} eq 'nfs') {
-	cat_("/proc/mounts") =~ m|(\S+):(\S+)\s+/tmp/image nfs| or die;
-	push @ks, "server:$1", "directory:$2";
-    }
-
-    if (member($o->{method}, qw(http ftp nfs))) {
-	my ($intf) = values %{$o->{intf}};
-	push @ks, "interface:$intf->{DEVICE}";
-	if ($intf->{BOOTPROTO} eq 'dhcp') {
-	    push @ks, "network:dhcp";
-	} else {
-	    require network;
-	    push @ks, "network:static", "ip:$intf->{IPADDR}", "netmask:$intf->{NETMASK}", "gateway:$o->{netc}{GATEWAY}";
-	    my @dnss = network::dnsServers($o->{netc});
-	    push @ks, "dns:$dnss[0]" if @dnss;
-	}
-    }
-    
-    "automatic=".join(',', @ks);
-}
-
-sub guess_mount_point {
-    my ($part, $prefix, $user) = @_;
-
-    my %l = (
-	     '/'     => 'etc/fstab',
-	     '/boot' => 'vmlinuz',
-	     '/tmp'  => '.X11-unix',
-	     '/usr'  => 'X11R6',
-	     '/var'  => 'catman',
-	    );
-
-    my $handle = any::inspect($part, $prefix) or return;
-    my $d = $handle->{dir};
-    my ($mnt) = grep { -e "$d/$l{$_}" } keys %l;
-    $mnt ||= (stat("$d/.bashrc"))[4] ? '/root' : '/home/user' . ++$$user if -e "$d/.bashrc";
-    $mnt ||= (grep { -d $_ && (stat($_))[4] >= 500 && -e "$_/.bashrc" } glob_("$d")) ? '/home' : '';
-    ($mnt, $handle);
-}
-
-sub suggest_mount_points {
-    my ($fstab, $prefix, $uniq) = @_;
-
-    my $user;
-    foreach my $part (grep { isTrueFS($_) } @$fstab) {
-	$part->{mntpoint} && !$part->{unsafeMntpoint} and next; #- if already found via an fstab
-
-	my ($mnt, $handle) = guess_mount_point($part, $prefix, \$user) or next;
-
-	next if $uniq && fsedit::mntpoint2part($mnt, $fstab);
-	$part->{mntpoint} = $mnt; delete $part->{unsafeMntpoint};
-
-	#- try to find other mount points via fstab
-	fs::merge_info_from_fstab($fstab, $handle->{dir}, $uniq, 'loose') if $mnt eq '/';
-    }
-    $_->{mntpoint} and log::l("suggest_mount_points: $_->{device} -> $_->{mntpoint}") foreach @$fstab;
-}
-
-#- mainly for finding the root partitions for upgrade
-sub find_root_parts {
-    my ($fstab, $prefix) = @_;
-    log::l("find_root_parts");
-    my $user;
-    grep { 
-	my ($mnt) = guess_mount_point($_, $prefix, \$user);
-	$mnt eq '/';
-    } @$fstab;
-}
-sub use_root_part {
-    my ($all_hds, $part, $prefix) = @_;
-    my $fstab = [ fsedit::get_really_all_fstab($all_hds) ];
-    {
-	my $handle = any::inspect($part, $prefix) or die;
-	fs::merge_info_from_fstab($fstab, $handle->{dir}, 'uniq');
-    }
-    map { $_->{mntpoint} = 'swap' } grep { isSwap($_) } @$fstab; #- use all available swap.
-}
-
-sub getHds {
-    my ($o, $f_err) = @_;
-    my $ok = 1;
-    my $try_scsi = !$::expert;
-    my $flags = $o->{partitioning};
-
-    my @drives = detect_devices::hds();
-#    add2hash_($o->{partitioning}, { readonly => 1 }) if partition_table_raw::typeOfMBR($drives[0]{device}) eq 'system_commander';
-
-  getHds: 
-    my $all_hds = catch_cdie { fsedit::hds(\@drives, $flags) }
-      sub {
-	  $ok = 0;
-	  my $err = formatError($@);
-	  log::l("error reading partition table: $err");
-	  !$flags->{readonly} && $f_err and $f_err->($err);
-      };
-    my $hds = $all_hds->{hds};
-
-    if (is_empty_array_ref($hds) && $try_scsi) {
-	$try_scsi = 0;
-	$o->setupSCSI; #- ask for an unautodetected scsi card
-	goto getHds;
-    }
-    if (!$::testing) {
-	@$hds = grep { eval { partition_table_raw::test_for_bad_drives($_) }; !$@ } @$hds;
-    }
-
-    $ok = fsedit::verifyHds($hds, $flags->{readonly}, $ok)
-        if !($flags->{clearall} || $flags->{clear});
-
-    #- try to figure out if the same number of hds is available, use them if ok.
-    $ok && $hds && @$hds > 0 && @{$o->{all_hds}{hds} || []} == @$hds and return $ok;
-
-    fs::get_raw_hds('', $all_hds);
-    fs::add2all_hds($all_hds, @{$o->{manualFstab}});
-
-    $o->{all_hds} = $all_hds;
-    $o->{fstab} = [ fsedit::get_all_fstab($all_hds) ];
-    fs::merge_info_from_mtab($o->{fstab});
-
-    my @win = grep { isFat($_) && isFat({ type => fsedit::typeOfPart($_->{device}) }) } @{$o->{fstab}};
-    log::l("win parts: ", join ",", map { $_->{device} } @win) if @win;
-    if (@win == 1) {
-	#- Suggest /boot/efi on ia64.
-	$win[0]{mntpoint} = arch() =~ /ia64/ ? "/boot/efi" : "/mnt/windows";
-    } else {
-	my %w; foreach (@win) {
-	    my $v = $w{$_->{device_windobe}}++;
-	    $_->{mntpoint} = $_->{unsafeMntpoint} = "/mnt/win_" . lc($_->{device_windobe}) . ($v ? $v+1 : ''); #- lc cuz of StartOffice(!) cf dadou
-	}
-    }
-
-    my @sunos = grep { isSunOS($_) && type2name($_->{type}) =~ /root/i } @{$o->{fstab}}; #- take only into account root partitions.
-    if (@sunos) {
-	my $v = '';
-	map { $_->{mntpoint} = $_->{unsafeMntpoint} = "/mnt/sunos" . ($v && ++$v) } @sunos;
-    }
-    #- a good job is to mount SunOS root partition, and to use mount point described here in /etc/vfstab.
-
-    $ok;
-}
-
-sub log_sizes {
-    my ($o) = @_;
-    my @df = MDK::Common::System::df($o->{prefix});
-    log::l(sprintf "Installed: %s(df), %s(rpm)",
-	   formatXiB($df[0] - $df[1], 1024),
-	   formatXiB(sum(`$ENV{LD_LOADER} rpm --root $o->{prefix}/ -qa --queryformat "%{size}\n"`))) if -x "$o->{prefix}/bin/rpm";
-}
-
-sub copy_advertising {
-    my ($o) = @_;
-
-    return if $::rootwidth < 800;
-
-    my $f;
-    my $source_dir = "Mandrake/share/advertising";
-    foreach ("." . $o->{lang}, "." . substr($o->{lang},0,2), '') {
-	$f = getFile("$source_dir$_/list") or next;
-	$source_dir = "$source_dir$_";
-    }
-    if (my @files = <$f>) {
-	my $dir = "$o->{prefix}/tmp/drakx-images";
-	mkdir $dir;
-	unlink glob_("$dir/*");
-	foreach (@files) {
-	    chomp;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/\.png/\.pl/;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/\.pl/_icon\.png/;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/_icon\.png/\.png/;
-	}
-	@advertising_images = map { "$dir/$_" } @files;
-    }
-}
-
-sub remove_advertising {
-    my ($o) = @_;
-    eval { rm_rf("$o->{prefix}/tmp/drakx-images") };
-    @advertising_images = ();
-}
-
-sub disable_user_view {
-    my ($prefix) = @_;
-    substInFile { s/^UserView=.*/UserView=true/ } "$prefix/usr/share/config/kdm/kdmrc";
-    substInFile { s/^Browser=.*/Browser=0/ } "$prefix/etc/X11/gdm/gdm.conf";
-}
-
-sub write_fstab {
-    my ($o) = @_;
-    fs::write_fstab($o->{all_hds}, $o->{prefix}) if !$::live;
-}
-
-my @bigseldom_used_groups = (
-);
-
-sub check_prog {
-    my ($f) = @_;
-
-    my @l = $f !~ m|^/| ?
-        map { "$_/$f" } split(":", $ENV{PATH}) :
-	$f;
-    return if grep { -x $_ } @l;
-
-    common::usingRamdisk() or log::l("ERROR: check_prog can't find the program $f and we're not using ramdisk"), return;
-
-    my ($f_) = map { m|^/| ? $_ : "/usr/bin/$_" } $f;
-    remove_bigseldom_used();
-    foreach (@bigseldom_used_groups) {
-	my (@l) = map { m|^/| ? $_ : "/usr/bin/$_" } @$_;
-	if (member($f_, @l)) {
-	    foreach (@l) {
-		getAndSaveFile($_);
-		chmod 0755, $_;
-	    }
-	    return;
-	}
-    }
-    getAndSaveFile($f_);
-    chmod 0755, $f_;
-}
-
-sub remove_unused {
-    $::testing and return;
-    if ($::o->isa('interactive_gtk')) {
-	unlink glob_("/lib/lib$_*") foreach qw(slang newt);
-	unlink "/usr/bin/perl-install/auto/Newt/Newt.so";
-    } else {
-	unlink glob_("/usr/X11R6/bin/XF*");
-    }
-}
-
-sub remove_bigseldom_used {
-    log::l("remove_bigseldom_used");
-    $::testing and return;
-    remove_unused();
-    unlink "/usr/X11R6/lib/modules/xf86Wacom.so";
-    unlink glob_("/usr/share/gtk/themes/$_*") foreach qw(marble3d);
-    unlink(m|^/| ? $_ : "/usr/bin/$_") foreach 
-      ((map { @$_ } @bigseldom_used_groups),
-       qw(pvcreate pvdisplay vgchange vgcreate vgdisplay vgextend vgremove vgscan lvcreate lvdisplay lvremove /lib/liblvm.so),
-       qw(mkreiserfs resize_reiserfs mkfs.xfs),
-      );
-}
-
-################################################################################
-package pkgs_interactive;
-use run_program;
-use common;
-use pkgs;
-
-sub install_steps::do_pkgs {
-    my ($o) = @_;
-    bless { o => $o }, 'pkgs_interactive';
-}
-
-sub install {
-    my ($do, @l) = @_;
-    $do->{o}->pkg_install(@l);
-}
-
-sub is_installed {
-    my ($do, @l) = @_;
-    foreach (@l) {
-	my $p = pkgs::packageByName($do->{o}->{packages}, $_);
-	$p && pkgs::packageFlagSelected($p) or return;
-    }
-    1;
-}
-
-sub remove {
-    my ($do, @l) = @_;
-
-    @l = grep {
-	my $p = pkgs::packageByName($do->{o}->{packages}, $_);
-	pkgs::unselectPackage($do->{o}->{packages}, $p) if $p;
-	$p;
-    } @l;
-    run_program::rooted($do->{o}->{prefix}, 'rpm', '-e', @l);
-}
-
-sub remove_nodeps {
-    my ($do, @l) = @_;
-
-    @l = grep {
-	my $p = pkgs::packageByName($do->{o}->{packages}, $_);
-	pkgs::packageSetFlagSelected($p, 0) if $p;
-	$p;
-    } @l;
-    run_program::rooted($do->{o}->{prefix}, 'rpm', '-e', '--nodeps', @l);
-}
-################################################################################
-
-package install_any;
-
-1;
diff --git a/perl-install/install_gtk.pm b/perl-install/install_gtk.pm
deleted file mode 100644
index a30298158..000000000
--- a/perl-install/install_gtk.pm
+++ /dev/null
@@ -1,440 +0,0 @@
-package install_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use my_gtk qw(:helpers :wrappers);
-use common;
-use lang;
-use devices;
-
-#-#####################################################################################
-#-INTERN CONSTANT
-#-#####################################################################################
-my @themes_vga16 = qw(blue blackwhite savane);
-my @themes_desktop = qw(mdk-Desktop marble3d);
-my @themes_firewall = qw(mdk-Firewall);
-my @themes = qw(mdk marble3d);
-
-my (@background1, @background2);
-
-
-#------------------------------------------------------------------------------
-sub load_rc {
-    my ($name) = @_;
-
-    if (my ($f) = grep { -r $_ } map { "$_/$name.rc" } ("share", $ENV{SHARE_PATH}, dirname(__FILE__))) {
-	Gtk::Rc->parse($f);
-	foreach (cat_($f)) {
-	    if (/style\s+"background"/ .. /^\s*$/) {
-		@background1 = map { $_ * 256 * 257 } split ',', $1 if /NORMAL.*\{(.*)\}/;
-		@background2 = map { $_ * 256 * 257 } split ',', $1 if /PRELIGHT.*\{(.*)\}/;
-	    }
-	}
-    }
-}
-
-sub default_theme {
-    my ($o) = @_;
-    @themes = @themes_desktop if $o->{meta_class} eq 'desktop';
-    @themes = @themes_firewall if $o->{meta_class} eq 'firewall';
-    @themes = @themes_vga16 if $o->{simple_themes} || $o->{vga16};
-    install_theme($o, $o->{theme} || $themes[0]);
-}
-
-#------------------------------------------------------------------------------
-sub install_theme {
-    my ($o, $theme) = @_;
-
-    $o->{theme} = $theme || $o->{theme};
-
-    load_rc($_) foreach "themes-$o->{theme}", "install", "themes";
-
-    if (my ($font, $font2) = lang::get_x_fontset($o->{lang}, $::rootwidth < 800 ? 10 : 12)) {
-	$font2 ||= $font;
-	Gtk::Rc->parse_string(qq(
-style "default-font" 
-{
-   fontset = "$font,*"
-}
-style "small-font"
-{
-   fontset = "$font2,*"
-}
-widget "*" style "default-font"
-widget "*Steps*" style "small-font"
-
-));
-    }
-
-    gtkset_background(@background1) unless $::live; #- || testing;
-
-    create_logo_window($o);
-    create_help_window($o);
-}
-
-#------------------------------------------------------------------------------
-sub create_big_help {
-    my ($o) = @_;
-    my $w = my_gtk->new('', grab => 1, force_position => [ $::stepswidth, $::logoheight ]);
-    $w->{rwindow}->set_usize($::logowidth, $::rootheight - $::logoheight);
-    gtkadd($w->{window},
-	   gtkpack_(new Gtk::VBox(0,0),
-		    1, createScrolledWindow(gtktext_insert(new Gtk::Text, $o->{current_help})),
-		    0, gtksignal_connect(my $ok = new Gtk::Button(_("Ok")), "clicked" => sub { Gtk->main_quit }),
-		   ));
-    $ok->grab_focus;
-    $w->main;
-    gtkset_mousecursor_normal();
-}
-
-#------------------------------------------------------------------------------
-sub create_help_window {
-    my ($o) = @_;
-
-    my $w;
-    if ($w = $o->{help_window}) {
-	$_->destroy foreach $w->{window}->children;
-    } else {
-	$w = bless {}, 'my_gtk';
-	$w->{rwindow} = $w->{window} = new Gtk::Window;
-	$w->{rwindow}->set_uposition($::rootwidth - $::helpwidth, $::rootheight - $::helpheight);
-	$w->{rwindow}->set_usize($::helpwidth, $::helpheight);
-	$w->{rwindow}->set_title('skip');
-	$w->sync;
-    }
-    my $pixmap = gtkpng("$ENV{SHARE_PATH}/help.png");
-    gtkadd($w->{window},
-	   gtkpack_(new Gtk::HBox(0,-2),
-		    0, gtkadd(gtksignal_connect(new Gtk::Button, clicked => sub { create_big_help($o) }), $pixmap),
-		    1, createScrolledWindow($o->{help_window_text} = new Gtk::Text),
-		   ));
-    $o->set_help($o->{step}) if $o->{step};
-    $w->show;
-    $o->{help_window} = $w;
-}
-
-#------------------------------------------------------------------------------
-sub create_steps_window {
-    my ($o) = @_;
-
-    my $PIX_H = my $PIX_W = 21;
-
-    $o->{steps_window}->destroy if $o->{steps_window};
-
-    my $w = bless {}, 'my_gtk';
-    $w->{rwindow} = $w->{window} = new Gtk::Window;
-    $w->{rwindow}->set_uposition(0, 0);
-    $w->{rwindow}->set_usize($::stepswidth, $::stepsheight);
-    $w->{rwindow}->set_name('Steps');
-    $w->{rwindow}->set_events('button_press_mask');
-    $w->{rwindow}->set_title('skip');
-    #$w->show;
-
-    gtkadd($w->{window},
-	   gtkpack_(new Gtk::VBox(0,0),
-		    (map {; 1, $_ } map {
-			my $step_name = $_;
-			my $step = $o->{steps}{$_};
-			my $darea = new Gtk::DrawingArea;
-			my $in_button;
-			my $draw_pix = sub {
-			    my ($map, $mask) = gtkcreate_xpm($_[0]);
-			    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-							 $map, 0, 0,
-							 ($darea->allocation->[2]-$PIX_W)/2 + 3,
-							 ($darea->allocation->[3]-$PIX_H)/2,
-							 $PIX_W , $PIX_H );
-			};
-
-			my $f = sub { 
-			    my ($type) = @_;
-			    my $color = $step->{done} ? 'green' : $step->{entered} ? 'orange' : 'red';
-			    "$ENV{SHARE_PATH}/step-$color$type.xpm";
-			};
-			$darea->set_usize($PIX_W+3,$PIX_H);
-			$darea->set_events(['exposure_mask', 'enter_notify_mask', 'leave_notify_mask', 'button_press_mask', 'button_release_mask' ]);
-			$darea->signal_connect(expose_event => sub { $draw_pix->($f->('')) });
-			if ($step->{reachable}) {
-			    $darea->signal_connect(enter_notify_event => sub { $in_button=1; $draw_pix->($f->('-on')); });
-			    $darea->signal_connect(leave_notify_event => sub { undef $in_button; $draw_pix->($f->('')); });
-			    $darea->signal_connect(button_press_event => sub { $draw_pix->($f->('-click')); });
-			    $darea->signal_connect(button_release_event => sub { $in_button && die "setstep $step_name\n" });
-			}
-			gtkpack_(new Gtk::HBox(0,5), 0, $darea, 0, new Gtk::Label(translate($step->{text})));
-		    } grep {
-			!eval $o->{steps}{$_}{hidden};
-		    } @{$o->{orderedSteps}}),
-		    0, gtkpack(new Gtk::HBox(0,0), map {
-			my $t = $_;
-			my $w = new Gtk::Button('');
-			$w->set_name($t);
-			$w->set_usize(0, 7);
-			gtksignal_connect($w, clicked => sub {
-			    $::setstep or return; #- just as setstep s
-			    install_theme($o, $t); die "theme_changed\n" 
-			});
-		    } @themes)));
-    $w->show;
-    $o->{steps_window} = $w;
-}
-
-#------------------------------------------------------------------------------
-sub create_logo_window {
-    my ($o) = @_;
-
-    gtkdestroy($o->{logo_window});
-    my $w = bless {}, 'my_gtk';
-    $w->{rwindow} = $w->{window} = new Gtk::Window;
-    $w->{rwindow}->set_uposition($::stepswidth, 0);
-    $w->{rwindow}->set_usize($::logowidth, $::logoheight);
-    $w->{rwindow}->set_name("logo");
-    $w->{rwindow}->set_title('skip');
-    $w->show;
-    my $file = $o->{meta_class} eq 'desktop' ? "logo-mandrake-Desktop.png" : "logo-mandrake.png";
-    $o->{meta_class} eq 'firewall' and $file = "logo-mandrake-Firewall.png";
-    -r $file or $file = "$ENV{SHARE_PATH}/$file";
-    -r $file and gtkadd($w->{window}, gtkpng($file));
-    $o->{logo_window} = $w;
-}
-
-#------------------------------------------------------------------------------
-sub init_sizes() {
-    ($::rootheight,  $::rootwidth)    = my_gtk::gtkroot()->get_size;
-    $::live and $::rootheight -= 80;
-    #- ($::rootheight,  $::rootwidth)    = (min(768, $::rootheight), min(1024, $::rootwidth));
-    ($::stepswidth,  $::stepsheight)  = (145, $::rootheight);
-    ($::logowidth,   $::logoheight)   = ($::rootwidth - $::stepswidth, 40);
-    ($::helpwidth,   $::helpheight)   = ($::rootwidth - $::stepswidth, 104);
-    ($::windowwidth, $::windowheight) = ($::rootwidth - $::stepswidth, $::rootheight - $::helpheight - $::logoheight);
-}
-
-#------------------------------------------------------------------------------
-sub createXconf {
-    my ($file, $mouse_type, $mouse_dev, $wacom_dev) = @_;
-
-    devices::make("/dev/kbd") if arch() =~ /^sparc/; #- used by Xsun style server.
-    symlinkf(devices::make($mouse_dev), "/dev/mouse");
-
-    #- needed for imlib to start on 8-bit depth visual.
-    symlink("/tmp/stage2/etc/imrc", "/etc/imrc");
-    symlink("/tmp/stage2/etc/im_palette.pal", "etc/im_palette.pal");
-
-if (arch() =~ /^ia64/) {
-     require Xconfigurator;
-     my ($card) = Xconfigurator::cardConfigurationAuto();
-     Xconfigurator::updateCardAccordingName($card, $card->{type}) if $card && $card->{type};
-    local *F;
-    open F, ">$file" or die "can't create X configuration file $file";
-    print F <<END;
-
-Section "Files"
-   FontPath   "/usr/X11R6/lib/X11/fonts:unscaled"
-EndSection
-
-Section "InputDevice"
-    Identifier "Keyboard1"
-    Driver      "Keyboard"
-    Option "AutoRepeat"  "250 30"
-    Option "XkbDisable"
-
-    Option "XkbRules" "xfree86"
-    Option "XkbModel" "pc105"
-    Option "XkbLayout" ""
-EndSection
-
-Section "InputDevice"
-    Identifier  "Mouse1"
-    Driver      "mouse"
-    Option "Protocol"    "$mouse_type"
-    Option "Device"      "/dev/mouse"
-EndSection
-
-Section "Monitor"
-    Identifier "Generic|High Frequency SVGA, 1024x768 at 70 Hz"
-    VendorName "Unknown"
-    ModelName  "Unknown"
-    HorizSync  31.5-35.5
-    VertRefresh 50-70
-EndSection
-
-Section "Device"
-    Identifier "Generic VGA"
-    Driver     "vga"
-EndSection
-
-Section "Device"
-    Identifier  "device1"
-    VendorName  "Unknown"
-    BoardName   "Unknown"
-    Driver      "$card->{driver}"
-EndSection
-
-Section "Screen"
-    Identifier "screen1"
-    Device      "device1"
-    Monitor     "Generic|High Frequency SVGA, 1024x768 at 70 Hz"
-    DefaultColorDepth 16
-    Subsection "Display"
-        Depth       16
-        Modes       "800x600" "640x480"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-
-Section "ServerLayout"
-    Identifier "layout1"
-    Screen     "screen1"
-    InputDevice "Mouse1" "CorePointer"
-    InputDevice "Keyboard1" "CoreKeyboard"
-EndSection
-
-END
-
-
-}
-else
-  {
-
-
-    my $wacom;
-    if ($wacom_dev) {
-	$wacom_dev = devices::make($wacom_dev);
-	$wacom = <<END;
-Section "Module"
-   Load "xf86Wacom.so"
-EndSection
-
-Section "XInput"
-    SubSection "WacomStylus"
-        Port "$wacom_dev"
-        AlwaysCore
-    EndSubSection
-    SubSection "WacomCursor"
-        Port "$wacom_dev"
-        AlwaysCore
-    EndSubSection
-    SubSection "WacomEraser"
-        Port "$wacom_dev"
-        AlwaysCore
-    EndSubSection
-EndSection
-END
-    }
-
-    local *F;
-    open F, ">$file" or die "can't create X configuration file $file";
-    print F <<END;
-Section "Files"
-   FontPath   "/usr/X11R6/lib/X11/fonts:unscaled"
-EndSection
-
-Section "Keyboard"
-   Protocol    "Standard"
-   AutoRepeat  0 0
-
-   LeftAlt         Meta
-   RightAlt        Meta
-   ScrollLock      Compose
-   RightCtl        Control
-END
-
-    if (arch() =~ /^sparc/) {
-	print F <<END;
-   XkbRules    "sun"
-   XkbModel    "sun"
-   XkbLayout   "us"
-   XkbCompat   "compat/complete"
-   XkbTypes    "types/complete"
-   XkbKeycodes "sun(type5)"
-   XkbGeometry "sun(type5)"
-   XkbSymbols  "sun/us(sun5)"
-END
-    } else {
-	print F "    XkbDisable\n";
-    }
-
-    print F <<END;
-EndSection
-
-Section "Pointer"
-   Protocol    "$mouse_type"
-   Device      "/dev/mouse"
-   ZAxisMapping 4 5
-EndSection
-
-$wacom
-
-Section "Monitor"
-   Identifier  "My Monitor"
-   VendorName  "Unknown"
-   ModelName   "Unknown"
-   HorizSync   31.5-35.5
-   VertRefresh 50-70
-   Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
-   Modeline "640x480"     28.3   640  664  760  800   480  491  493  525
-   ModeLine "800x600"     36     800  824  896 1024   600  601  603  625
-EndSection
-
-
-Section "Device"
-   Identifier "Generic VGA"
-   VendorName "Unknown"
-   BoardName "Unknown"
-   Chipset "generic"
-EndSection
-
-Section "Device"
-   Identifier "svga"
-   VendorName "Unknown"
-   BoardName "Unknown"
-EndSection
-
-Section "Screen"
-    Driver      "vga16"
-    Device      "Generic VGA"
-    Monitor     "My Monitor"
-    Subsection "Display"
-        Modes       "640x480"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-
-Section "Screen"
-    Driver      "fbdev"
-    Device      "Generic VGA"
-    Monitor     "My Monitor"
-    Subsection "Display"
-        Depth       16
-        Modes       "default"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-
-Section "Screen"
-    Driver "svga"
-    Device      "svga"
-    Monitor     "My Monitor"
-    Subsection "Display"
-        Depth       16
-        Modes       "800x600" "640x480"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-
-Section "Screen"
-    Driver      "accel"
-    Device      "svga"
-    Monitor     "My Monitor"
-    Subsection "Display"
-        Depth       16
-        Modes       "800x600" "640x480"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-END
-}
-}
-#-   ModeLine "640x480"     28     640  672  768  800   480  490  492  525
-
-1;
diff --git a/perl-install/install_interactive.pm b/perl-install/install_interactive.pm
deleted file mode 100644
index b9ee10de7..000000000
--- a/perl-install/install_interactive.pm
+++ /dev/null
@@ -1,272 +0,0 @@
-package install_interactive; # $Id$
-
-use diagnostics;
-use strict;
-
-use vars;
-
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use detect_devices;
-use install_steps;
-use devices;
-use fsedit;
-use log;
-use fs;
-
-
-sub tellAboutProprietaryModules {
-    my ($o) = @_;
-    my @l = grep {$_} map { $_->{driver} =~ /^Bad:(.*)/ && $1 } detect_devices::probeall();
-    $o->ask_warn('', 
-_("Some hardware on your computer needs ``proprietary'' drivers to work.
-You can find some information about them at: %s", join(", ", @l))) if @l;
-}
-
-#- unit of $mb is mega bytes, min and max are in sectors, this
-#- function is used to convert back to sectors count the size of
-#- a partition ($mb) given from the interface (on Resize or Create).
-#- modified to take into account a true bounding with min and max.
-sub from_Mb {
-    my ($mb, $min, $max) = @_;
-    $mb <= $min >> 11 and return $min;
-    $mb >= $max >> 11 and return $max;
-    $mb * 2048;
-}
-
-sub partition_with_diskdrake {
-    my ($o, $all_hds, $nowizard) = @_;
-    my $ok; 
-
-    $o->set_help('partition_with_diskdrake');
-    do {
-	$ok = 1;
-	require diskdrake::interactive;
-	{
-	    local $::expert = $::expert;
-	    diskdrake::interactive::main($o, $all_hds, $nowizard);
-	}
-	if (delete $o->{wizard}) {
-	    partitionWizard($o, 'nodiskdrake') or redo;
-	    return 1;
-	}
-	my @fstab = fsedit::get_all_fstab($all_hds);
-	
-	unless (fsedit::get_root_(\@fstab)) {
-	    $ok = 0;
-	    $o->ask_okcancel('', _("You must have a root partition.
-For this, create a partition (or click on an existing one).
-Then choose action ``Mount point'' and set it to `/'"), 1) or return;
-	}
-	if (!grep { isSwap($_) } @fstab) {
-	    $o->ask_warn('', _("You must have a swap partition")), $ok=0 if !$::expert;
-	    $ok &&= $::expert || $o->ask_okcancel('', _("You don't have a swap partition.\n\nContinue anyway?"));
-	}
-	if (arch() =~ /ia64/ && !fsedit::has_mntpoint("/boot/efi", $all_hds)) {
-	    $o->ask_warn('', _("You must have a FAT partition mounted in /boot/efi"));
-	    $ok = '';
-	}
-    } until $ok;
-    1;
-}
-
-sub partitionWizardSolutions {
-    my ($o, $all_hds, $fstab, $readonly) = @_;
-    my $hds = $all_hds->{hds};
-    my @wizlog;
-    my (@solutions, %solutions);
-
-    my $min_linux = 400 << 11;
-    my $max_linux = 3000 << 11;
-    my $min_swap = 50 << 11;
-    my $max_swap = 300 << 11;
-    my $min_freewin = 100 << 11;
-
-    # each solution is a [ score, text, function ], where the function retunrs true if succeeded
-
-    my @good_hds = grep { $_->can_raw_add } @$hds;
-    if (fsedit::free_space(@good_hds) > $min_linux and !$readonly) {
-	$solutions{free_space} = [ 20, _("Use free space"), sub { fsedit::auto_allocate($all_hds); 1 } ]
-    } else { 
-	push @wizlog, _("Not enough free space to allocate new partitions") . ": " .
-	  (@good_hds ? 
-	   fsedit::free_space(@good_hds) . " < $min_linux" :
-	   "no harddrive on which partitions can be added") if !$readonly;
-    }
-
-    if (my @truefs = grep { isTrueFS($_) } @$fstab) {
-	#- value twice the ext2 partitions
-	$solutions{existing_part} = [ 6 + @truefs + @$fstab, _("Use existing partitions"), sub { $o->ask_mntpoint_s($fstab) } ]
-    } else {
-	push @wizlog, _("There is no existing partition to use");
-    }
-
-    my @fats = grep { isFat($_) } @$fstab;
-    fs::df($_) foreach @fats;
-    if (my @ok_forloopback = sort { $b->{free} <=> $a->{free} } grep { $_->{free} > $min_linux + $min_swap + $min_freewin } @fats) {
-	$solutions{loopback} = 
-	  [ -10 - @fats, _("Use the Windows partition for loopback"), 
-	    sub { 
-		my ($s_root, $s_swap);
-		my $part = $o->ask_from_listf('', _("Which partition do you want to use for Linux4Win?"), \&partition_table::description, \@ok_forloopback) or return;
-		$max_swap = $min_swap + 1 if $part->{free} - $max_swap < $min_linux;
-		$o->ask_from('', _("Choose the sizes"), [ 
-		   { label => _("Root partition size in MB: "), val => \$s_root, min => $min_linux >> 11, max => min($part->{free} - $max_swap, $max_linux) >> 11, type => 'range' },
-		   { label => _("Swap partition size in MB: "), val => \$s_swap, min => $min_swap >> 11,  max => $max_swap >> 11, type => 'range' },
-		]) or return;
-		push @{$part->{loopback}}, 
-		  { type =>0x483, loopback_file => '/lnx4win/linuxsys.img', mntpoint => '/',    size => $s_root << 11, loopback_device => $part, notFormatted => 1 },
-		  { type => 0x82, loopback_file => '/lnx4win/swapfile',     mntpoint => 'swap', size => $s_swap << 11, loopback_device => $part, notFormatted => 1 };
-		fsedit::recompute_loopbacks($all_hds);
-		1;
-	    } ];
-	$solutions{resize_fat} = 
-	  [ 6 - @fats, _("Use the free space on the Windows partition"),
-	    sub {
-		$o->set_help('resizeFATChoose');
-		my $part = $o->ask_from_listf('', _("Which partition do you want to resize?"), \&partition_table::description, \@ok_forloopback) or return;
-		$o->set_help('resizeFATWait');
-		my $w = $o->wait_message(_("Resizing"), _("Resizing Windows partition"));
-		require resize_fat::main;
-		my $resize_fat = eval { resize_fat::main->new($part->{device}, devices::make($part->{device})) };
-		$@ and die _("The FAT resizer is unable to handle your partition, 
-the following error occured: %s", $@);
-		my $min_win = $resize_fat->min_size;
-		$part->{size} > $min_linux + $min_swap + $min_freewin + $min_win or die _("Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandrake Linux installation.");
-		$o->ask_okcancel('', _("WARNING!
-
-DrakX will now resize your Windows partition. Be careful:
-this operation is dangerous. If you have not already done
-so, you should first exit the installation, run scandisk
-under Windows (and optionally run defrag), then restart the
-installation. You should also backup your data.
-When sure, press Ok.")) or return;
-
-		my $mb_size = $part->{size} >> 11;
-		$o->ask_from('', _("Which size do you want to keep for Windows on"), [
-                   { label => _("partition %s", partition_table::description($part)), val => \$mb_size, min => $min_win >> 11, max => ($part->{size} - $min_linux - $min_swap) >> 11, type => 'range' },
-                ]) or return;
-
-		my $size = from_Mb($mb_size, $min_win, $part->{size});
-
-		local *log::l = sub { $w->set(join(' ', @_)) };
-		eval { $resize_fat->resize($size) };
-		$@ and die _("FAT resizing failed: %s", $@);
-
-		$part->{size} = $size;
-		$part->{isFormatted} = 1;
-		
-		my ($hd) = fsedit::part2hd($part, $all_hds);
-		$hd->{isDirty} = $hd->{needKernelReread} = 1;
-		$hd->adjustEnd($part);
-		partition_table::adjust_local_extended($hd, $part);
-		partition_table::adjust_main_extended($hd);
-
-		fsedit::auto_allocate($all_hds);
-		1;
-	    } ] if !$readonly;
-    } else {
-	push @wizlog, _("There is no FAT partition to resize or to use as loopback (or not enough space left)") .
-	  @fats ? "\nFAT partitions:" . join('', map { "\n  $_->{device} $_->{free} (" . ($min_linux + $min_swap + $min_freewin) . ")" } @fats) : '';
-    }
-
-    if (@$fstab && !$readonly) {
-	$solutions{wipe_drive} =
-	  [ 10, fsedit::is_one_big_fat($hds) ? _("Remove Windows(TM)") : _("Erase entire disk"), 
-	    sub {
-		$o->set_help('takeOverHdChoose');
-		my $hd = $o->ask_from_listf('', _("You have more than one hard drive, which one do you install linux on?"),
-					    \&partition_table::description, $hds) or return;
-		$o->set_help('takeOverHdConfirm');
-		$o->ask_okcancel('', _("ALL existing partitions and their data will be lost on drive %s", partition_table::description($hd))) or return;
-		partition_table_raw::zero_MBR($hd);
-		fsedit::auto_allocate($all_hds);
-		1;
-	    } ];
-    }
-
-    if (!$readonly) {
-	$solutions{diskdrake} = [ 0, _("Custom disk partitioning"), sub { partition_with_diskdrake($o, $all_hds, 'nowizard') } ];
-    }
-
-    $solutions{fdisk} =
-      [ -10, _("Use fdisk"), sub { 
-	    $o->enter_console;
-	    foreach (@$hds) {
-		print "\n" x 10, _("You can now partition %s.
-When you are done, don't forget to save using `w'", partition_table::description($_));
-		print "\n\n";
-		my $pid = 0;
-		if (arch() =~ /ppc/) {
-			$pid = fork or exec "pdisk", devices::make($_->{device});
-		} else {
-			$pid = fork or exec "fdisk", devices::make($_->{device});
-		}			
-		waitpid($pid, 0);
-	    }
-	    $o->leave_console;
-	    0;
-	} ] if $o->{partitioning}{fdisk};
-
-    log::l("partitioning wizard log:\n", (map { ">>wizlog>>$_\n" } @wizlog));
-    %solutions;
-}
-
-sub partitionWizard {
-    my ($o, $nodiskdrake) = @_;
-
-    $o->set_help('doPartitionDisks');
-
-    my %solutions = partitionWizardSolutions($o, $o->{all_hds}, $o->{fstab}, $o->{partitioning}{readonly});
-    if ($o->{lnx4win}) {
-	if ($solutions{loopback}) {
-	    %solutions = (loopback => $solutions{loopback});
-	} else {
-	    $o->ask_warn('', _("You don't have enough free space on your Windows partition")) if grep { isFat($_) } @{$o->{fstab}}
-	}
-    }
-
-    delete $solutions{diskdrake} if $nodiskdrake;
-
-    my @solutions = sort { $b->[0] <=> $a->[0] } values %solutions;
-
-    my $level = $::expert ? -9999 : 0;
-    my @sol = grep { $_->[0] >= $level } @solutions;
-
-    log::l(      "solutions found: " . join('', map {$_->[1]} @sol) . 
-	   " (all solutions found: " . join('', map {$_->[1]} @solutions) . ")");
-
-    @solutions = @sol if @sol > 1;
-    log::l("solutions: ", int @solutions);
-    @solutions or $o->ask_warn('', _("I can't find any room for installing")), die 'already displayed';
-
-    my $ok; while (!$ok) {
-	log::l('HERE: ', join(',', map { $_->[1] } @solutions));
-	if (my $sol = $o->ask_from_listf('', _("The DrakX Partitioning wizard found the following solutions:"), sub { $_[0][1] }, \@solutions)) {
-	    log::l("partitionWizard calling solution $sol->[1]");
-	    eval { $ok = $sol->[2]->() };
-	    die if $@ =~ /setstep/;
-	    $ok &&= !$@;
-	    $@ and $o->ask_warn('', _("Partitioning failed: %s", $@));
-	} else {
-	    $nodiskdrake ? return : die "setstep setupSCSI\n";
-	}
-    }
-    1;
-}
-
-sub upNetwork {
-    my ($o, $pppAvoided) = @_;
-    my $w = $o->wait_message('', _("Bringing up the network"));
-    install_steps::upNetwork($o, $pppAvoided);
-}
-sub downNetwork {
-    my ($o, $pppOnly) = @_;
-    my $w = $o->wait_message('', _("Bringing down the network"));
-    install_steps::downNetwork($o, $pppOnly);
-}
-
-
-
-1;
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
deleted file mode 100644
index cea22abfc..000000000
--- a/perl-install/install_steps.pm
+++ /dev/null
@@ -1,1067 +0,0 @@
-package install_steps; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@filesToSaveForUpgrade @filesNewerToUseAfterUpgrade @ISA);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use install_any qw(:all);
-use partition_table qw(:types);
-use detect_devices;
-use modules;
-use run_program;
-use lang;
-use keyboard;
-use fsedit;
-use loopback;
-use pkgs;
-use any;
-use log;
-use fs;
-
-@filesToSaveForUpgrade = qw(
-/etc/ld.so.conf /etc/fstab /etc/hosts /etc/conf.modules /etc/modules.conf
-);
-
-@filesNewerToUseAfterUpgrade = qw(
-/etc/profile
-);
-
-#-######################################################################################
-#- OO Stuff
-#-######################################################################################
-sub new($$) {
-    my ($type, $o) = @_;
-
-    bless $o, ref $type || $type;
-    return $o;
-}
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub enteringStep {
-    my ($o, $step) = @_;
-    log::l("starting step `$step'");
-}
-sub leavingStep {
-    my ($o, $step) = @_;
-    log::l("step `$step' finished");
-
-    if (-d "$o->{prefix}/root/drakx") {
-	eval { cp_af("/tmp/ddebug.log", "$o->{prefix}/root/drakx") };
-	output(install_any::auto_inst_file(), install_any::g_auto_install(1));
-    }
-
-    for (my $s = $o->{steps}{first}; $s; $s = $o->{steps}{$s}{next}) {
-	#- the reachability property must be recomputed each time to take
-	#- into account failed step.
-	next if $o->{steps}{$s}{done} && !$o->{steps}{$s}{redoable};
-
-	my $reachable = 1;
-	if (my $needs = $o->{steps}{$s}{needs}) {
-	    my @l = ref $needs ? @$needs : $needs;
-	    $reachable = min(map { $o->{steps}{$_}{done} || 0 } @l);
-	}
-	$o->{steps}{$s}{reachable} = 1 if $reachable;
-    }
-    $o->{steps}{$step}{reachable} = $o->{steps}{$step}{redoable};
-
-    while (my $f = shift @{$o->{steps}{$step}{toBeDone} || []}) {
-	eval { &$f() };
-	$o->ask_warn(_("Error"), [
-_("An error occurred, but I don't know how to handle it nicely.
-Continue at your own risk."), $@ ]) if $@;
-    }
-}
-
-sub errorInStep($$) { print "error :(\n"; c::_exit(1) }
-sub kill_action {}
-sub set_help { 1 }
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-#------------------------------------------------------------------------------
-sub selectLanguage {
-    my ($o) = @_;
-    lang::set($o->{lang}, !$o->isa('interactive_gtk'));
-    $o->{langs} ||= { $o->{lang} => 1 };
-
-    log::l("selectLanguage: pack_langs ", lang::pack_langs($o->{langs}));
-
-    if ($o->{keyboard_unsafe} || !$o->{keyboard}) {
-	$o->{keyboard_unsafe} = 1;
-	$o->{keyboard} = keyboard::lang2keyboard($o->{lang});
-	keyboard::setup($o->{keyboard}) if !$::live;
-    }
-
-    addToBeDone {
-	lang::write_langs($o->{prefix}, $o->{langs});
-    } 'formatPartitions' unless $::g_auto_install;
-    addToBeDone {
-	lang::write($o->{prefix}, $o->{lang});
-    } 'installPackages' unless $::g_auto_install;
-}
-#------------------------------------------------------------------------------
-sub selectKeyboard {
-    my ($o) = @_;
-    keyboard::setup($o->{keyboard});
-
-    addToBeDone {
-	keyboard::write($o->{prefix}, $o->{keyboard}, lang::lang2charset($o->{lang}));
-    } 'installPackages' unless $::g_auto_install;
-}
-#------------------------------------------------------------------------------
-sub acceptLicence {}
-sub selectPath {}
-#------------------------------------------------------------------------------
-sub selectInstallClass {}
-#------------------------------------------------------------------------------
-sub setupSCSI {
-    my ($o) = @_;
-    modules::configure_pcmcia($o->{pcmcia}) if $o->{pcmcia};
-    modules::load_ide();
-    modules::load_category('disk/scsi|hardware_raid');
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisksBefore {
-    my ($o) = @_;
-    eval { 
-	close *pkgs::LOG;
-	eval { fs::umount("$o->{prefix}/proc") };
-	eval {          fs::umount_all($o->{fstab}, $o->{prefix}) };
-	eval { sleep 1; fs::umount_all($o->{fstab}, $o->{prefix}) } if $@; #- HACK
-    } if $o->{fstab} && !$::testing && !$::live;
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisksAfter {
-    my ($o) = @_;
-
-    if (!$::testing) {
-	my $hds = $o->{all_hds}{hds};
-	partition_table::write($_) foreach @$hds;
-	$_->{rebootNeeded} and $o->rebootNeeded foreach @$hds;
-    }
-
-    fs::set_removable_mntpoints($o->{all_hds});
-    fs::set_all_default_options($o->{all_hds}, $o->{useSupermount}, $o->{security}, lang::fs_options($o->{lang}))
-	if !$o->{isUpgrade};
-
-    $o->{fstab} = [ fsedit::get_all_fstab($o->{all_hds}) ];
-    fsedit::get_root_($o->{fstab}) or die "Oops, no root partition";
-
-    if (arch() =~ /ppc/ && detect_devices::get_mac_generation =~ /NewWorld/) {
-	die "Need bootstrap partition to boot system!" if !(defined $partition_table_mac::bootstrap_part);
-    }
-    
-    if (arch() =~ /ia64/ && !fsedit::has_mntpoint("/boot/efi", $o->{all_hds})) {
-	die _("You must have a FAT partition mounted in /boot/efi");
-    }
-
-    if ($o->{partitioning}{use_existing_root}) {
-	#- ensure those partitions are mounted so that they are not proposed in choosePartitionsToFormat
-	fs::mount_part($_, $o->{prefix}) foreach (sort { $a->{mntpoint} cmp $b->{mntpoint} }
-						  grep { $_->{mntpoint} && maybeFormatted($_) } @{$o->{fstab}});
-    }
-
-    cat_("/proc/mounts") =~ m|(\S+)\s+/tmp/image nfs| &&
-      !grep { $_->{mntpoint} eq "/mnt/nfs" } @{$o->{all_hds}{nfss}} and
-	push @{$o->{all_hds}{nfss}}, { type => 'nfs', mntpoint => "/mnt/nfs", device => $1, options => "noauto,ro,nosuid,soft,rsize=8192,wsize=8192" };
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
-    my ($o) = @_;
-
-    install_any::getHds($o);
-
-    if ($o->{partitioning}{use_existing_root} || $o->{isUpgrade}) {
-	# either one root is defined (and all is ok), or we take the first one we find
-	my $p = fsedit::get_root_($o->{fstab}) || first(install_any::find_root_parts($o->{fstab}, $o->{prefix})) or die;
-	install_any::use_root_part($o->{all_hds}, $p, $o->{prefix});
-    } 
-    if ($o->{partitioning}{auto_allocate}) {
-	fsedit::auto_allocate($o->{all_hds}, $o->{partitions});
-    }
-}
-
-#------------------------------------------------------------------------------
-
-sub ask_mntpoint_s {
-    my ($o, $fstab) = @_;
-
-    #- TODO: set the mntpoints
-
-    my %m; foreach (@$fstab) {
-	my $m = $_->{mntpoint};
-
-	next unless $m && $m ne 'swap'; #- there may be a lot of swap.
-
-	$m{$m} and die _("Duplicate mount point %s", $m);
-	$m{$m} = 1;
-
-	#- in case the type does not correspond, force it to ext2
-	$_->{type} = 0x83 if $m =~ m|^/| && !isFat($_) && !isTrueFS($_);
-    }
-    1;
-}
-
-
-sub rebootNeeded($) {
-    my ($o) = @_;
-    log::l("Rebooting...");
-    c::_exit(0);
-}
-
-sub choosePartitionsToFormat($$) {
-    my ($o, $fstab) = @_;
-
-    foreach (@$fstab) {
-	$_->{mntpoint} = "swap" if isSwap($_);
-	$_->{mntpoint} or next;
-	
-	add2hash_($_, { toFormat => $_->{notFormatted} });
-        $_->{toFormatUnsure} = member($_->{mntpoint}, '/', '/usr');
-
-	if (!$_->{toFormat}) {
-	    my $t = fsedit::typeOfPart($_->{device});
-	    $_->{toFormatUnsure} ||=
-	      #- if detected dos/win, it's not precise enough to just compare the types (too many of them)
-	      (!$t || isOtherAvailableFS({ type => $t }) ? !isOtherAvailableFS($_) : $t != $_->{type});
-	}
-    }
-}
-
-sub formatMountPartitions {
-    my ($o) = @_;
-    fs::formatMount_all($o->{all_hds}{raids}, $o->{fstab}, $o->{prefix});
-}
-
-#------------------------------------------------------------------------------
-sub setPackages {
-    my ($o) = @_;
-    install_any::setPackages($o);
-    pkgs::selectPackagesAlreadyInstalled($o->{packages}, $o->{prefix})
-	if !$o->{isUpgrade} && (-r "$o->{prefix}/var/lib/rpm/packages.rpm" || -r "$o->{prefix}/var/lib/rpm/Packages");
-}
-sub selectPackagesToUpgrade {
-    my ($o) = @_;
-    pkgs::selectPackagesToUpgrade($o->{packages}, $o->{prefix}, $o->{base}, $o->{toRemove}, $o->{toSave});
-}
-
-sub choosePackages {
-    my ($o, $packages, $compssUsers, $first_time) = @_;
-
-    #- now for upgrade, package that must be upgraded are
-    #- selected first, after is used the same scheme as install.
-
-    #- make sure we kept some space left for available else the system may
-    #- not be able to start (xfs at least).
-    my $available = install_any::getAvailableSpace($o);
-    my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024);
-    log::l(sprintf "available size %s (corrected %s)", formatXiB($available), formatXiB($availableCorrected));
-
-    add2hash_($o, { compssListLevel => 5 }) if !$::auto_install;
-
-    #- avoid destroying user selection of packages but only
-    #- for expert, as they may have done individual selection before.
-    if ($first_time || !$::expert) {
-	install_any::unselectMostPackages($o);
-
-	exists $o->{compssListLevel}
-	  and pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $o->{compssListLevel}, $availableCorrected);
-    }
-    $availableCorrected;
-}
-
-sub beforeInstallPackages {
-    my ($o) = @_;
-
-    #- save these files in case of upgrade failure.
-    if ($o->{isUpgrade}) {
-	foreach (@filesToSaveForUpgrade) {
-	    unlink "$o->{prefix}/$_.mdkgisave";
-	    if (-e "$o->{prefix}/$_") {
-		eval { cp_af("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgisave") };
-	    }
-	}
-	foreach (@filesNewerToUseAfterUpgrade) {
-	    unlink "$o->{prefix}/$_.rpmnew";
-	}
-    }
-
-    #- some packages need such files for proper installation.
-    install_any::write_fstab($o);
-
-    require network;
-    network::add2hosts("$o->{prefix}/etc/hosts", "localhost.localdomain", "127.0.0.1");
-
-    log::l("setting excludedocs to $o->{excludedocs}");
-    substInFile { s/%_excludedocs.*//; $_ .= "%_excludedocs yes\n" if eof && $o->{excludedocs} } "$o->{prefix}/etc/rpm/macros";
-}
-
-sub pkg_install {
-    my ($o, @l) = @_;
-    log::l("selecting packages");
-    require pkgs;
-    if ($::testing) {
-	log::l("selecting package \"$_\"") foreach @l;
-    } else {
-	pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_) || die "$_ rpm not found") foreach @l;
-    }
-    my @toInstall = pkgs::packagesToInstall($o->{packages});
-    if (@toInstall) {
-	log::l("installing packages");
-	$o->installPackages;
-    } else {
-	log::l("all packages selected are already installed, nothing to do")
-    }
-}
-
-sub pkg_install_if_requires_satisfied {
-    my ($o, @l) = @_;
-    require pkgs;
-    foreach (@l) {
-	my %newSelection;
-	my $pkg = pkgs::packageByName($o->{packages}, $_) || die "$_ rpm not found";
-	pkgs::selectPackage($o->{packages}, $pkg, 0, \%newSelection);
-	if (scalar(keys %newSelection) == 1) {
-	    pkgs::selectPackage($o->{packages}, $pkg);
-	} else {
-	    log::l("pkg_install_if_requires_satisfied: not selecting $_ because of ", join(", ", keys %newSelection));
-	}
-    }
-    $o->installPackages;
-}
-
-sub installPackages($$) { #- complete REWORK, TODO and TOCHECK!
-    my ($o) = @_;
-    my $packages = $o->{packages};
-
-    if (@{$o->{toRemove} || []}) {
-	#- hack to ensure proper upgrade of packages from other distribution,
-	#- as release number are not mandrake based. this causes save of
-	#- important files and restore them after.
-	foreach (@{$o->{toSave} || []}) {
-	    if (-e "$o->{prefix}/$_") {
-		eval { cp_af("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgisave") };
-	    }
-	}
-	pkgs::remove($o->{prefix}, $o->{toRemove});
-	foreach (@{$o->{toSave} || []}) {
-	    if (-e "$o->{prefix}/$_.mdkgisave") {
-		renamef("$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_");
-	    }
-	}
-	$o->{toSave} = [];
-
-	#- hack for compat-glibc to upgrade properly :-(
-	if (pkgs::packageFlagSelected(pkgs::packageByName($packages, 'compat-glibc')) &&
-	    !pkgs::packageFlagInstalled(pkgs::packageByName($packages, 'compat-glibc'))) {
-	    rename "$o->{prefix}/usr/i386-glibc20-linux", "$o->{prefix}/usr/i386-glibc20-linux.mdkgisave";
-	}
-    }
-
-    #- small transaction will be built based on this selection and depslist.
-    my @toInstall = pkgs::packagesToInstall($packages);
-
-    my $time = time;
-    $ENV{DURING_INSTALL} = 1;
-    pkgs::install($o->{prefix}, $o->{isUpgrade}, \@toInstall, $packages->{depslist}, $packages->{mediums});
-    delete $ENV{DURING_INSTALL};
-    run_program::rooted_or_die($o->{prefix}, 'ldconfig') unless $::g_auto_install;
-    log::l("Install took: ", formatTimeRaw(time - $time));
-    install_any::log_sizes($o);
-    scalar(@toInstall); #- return number of packages installed.
-}
-
-sub afterInstallPackages($) {
-    my ($o) = @_;
-
-    return if $::g_auto_install;
-
-    die _("Some important packages didn't get installed properly.
-Either your cdrom drive or your cdrom is defective.
-Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm\"
-") if grep { m|read failed: Input/output error| } cat_("$o->{prefix}/root/drakx/install.log");
-
-    if (arch() !~ /^sparc/) { #- TODO restore it as may be needed for sparc
-	-x "$o->{prefix}/usr/bin/dumpkeys" or $::testing or die 
-"Some important packages didn't get installed properly.
-
-Please switch to console 2 (using ctrl-alt-f2)
-and look at the log file /tmp/ddebug.log
-
-Consoles 1,3,4,7 may also contain interesting information";
-    }
-
-    #-  why not? cuz weather is nice today :-) [pixel]
-    common::sync(); common::sync();
-
-    if (do {
-	my $p = pkgs::packageByName($o->{packages}, 'devfsd');
-	$p && pkgs::packageFlagInstalled($p)
-    }) {
-        require bootloader;
-	bootloader::may_append($o->{bootloader}, devfs => 'mount');
-    }
-
-    #- generate /etc/lvmtab needed for rc.sysinit
-    run_program::rooted($o->{prefix}, 'vgscan') if -e '/etc/lvmtab';
-
-    #- configure PCMCIA services if needed.
-    modules::write_pcmcia($o->{prefix}, $o->{pcmcia});
-
-    #- for mandrake_firstime
-    touch "$o->{prefix}/var/lock/TMP_1ST";
-
-    any::config_dvd($o->{prefix});
-
-    any::writeandclean_ldsoconf($o->{prefix});
-
-    #- make sure wins is disabled in /etc/nsswitch.conf
-    #- else if eth0 is not existing, glibc segfaults.
-    substInFile { s/\s*wins// if /^\s*hosts\s*:/ } "$o->{prefix}/etc/nsswitch.conf";
-
-    #- make sure some services have been enabled (or a catastrophic restart will occur).
-    #- these are normally base package post install scripts or important services to start.
-    run_program::rooted($o->{prefix}, "chkconfig", "--add", $_) foreach
-			qw(random netfs network rawdevices sound kheader usb keytable syslog crond portmap);
-
-    if ($o->{mouse}{device} =~ /ttyS/) {
-	log::l("disabling gpm for serial mice (doesn't get along nicely with X)");
-	run_program::rooted($o->{prefix}, "chkconfig", "--del", "gpm") 
-    }
-
-    #- call update-menus at the end of package installation
-    run_program::rooted($o->{prefix}, "update-menus");
-
-    if ($o->{pcmcia}) {
-	substInFile { s/.*(TaskBarShowAPMStatus).*/$1=1/ } "$o->{prefix}/usr/lib/X11/icewm/preferences";
-	eval { cp_af("$o->{prefix}/usr/share/applnk/System/kapm.kdelnk",
-		     "$o->{prefix}/etc/skel/Desktop/Autostart/kapm.kdelnk") };
-    }
-
-    $o->install_urpmi;
-
-    if ($o->{lang} =~ /^(zh_TW|th|vi|be|bg)/) {
-	#- skip since we don't have the right font (it badly fails at least for zh_TW)
-    } elsif (my $LANG = lang::lang2LANG($o->{lang})) {
-	my $kdmrc = "$o->{prefix}/usr/share/config/kdm/kdmrc";
-
-	my $kde_charset = lang::charset2kde_charset(lang::lang2charset($o->{lang}));
-	my $welcome = c::to_utf8(_("Welcome to %s", '%n'));
-	substInFile { 
-	    s/^(GreetString)=.*/$1=$welcome/;
-	    s/^(Language)=.*/$1=$LANG/;
-	    if (!member($kde_charset, 'iso8859-1', 'iso8859-15')) { 
-		#- don't keep the default for those
-		s/^(StdFont)=.*/$1=*,12,5,$kde_charset,50,0/;
-		s/^(FailFont)=.*/$1=*,12,5,$kde_charset,75,0/;
-		s/^(GreetFont)=.*/$1=*,24,5,$kde_charset,50,0/;
-	    }
-	} "$o->{prefix}/usr/share/config/kdm/kdmrc";
-
-    }
-    install_any::disable_user_view($o->{prefix}) if $o->{security} >= 3 || $o->{authentication}{NIS};
-    run_program::rooted($o->{prefix}, "kdeDesktopCleanup");
-
-    foreach (list_skels($o->{prefix}, '.kde/share/config/kfmrc')) {
-	my $found;
-	substInFile {
-	    $found ||= /KFM Misc Defaults/;
-	    $_ .= 
-"[KFM Misc Defaults]
-GridWidth=85
-GridHeight=70
-" if eof && !$found;
-	} $_ 
-    }
-
-    #- move some file after an upgrade that may be seriously annoying.
-    #- and rename saved files to .mdkgiorig.
-    if ($o->{isUpgrade}) {
-	my $pkg = pkgs::packageByName($o->{packages}, 'rpm');
-	$pkg && pkgs::packageSelectedOrInstalled($pkg) && pkgs::versionCompare(pkgs::packageVersion($pkg), '4.0') >= 0 and
-	  pkgs::clean_old_rpm_db($o->{prefix});
-
-	log::l("moving previous desktop files that have been updated to Trash of each user");
-	install_any::kdemove_desktop_file($o->{prefix});
-
-	foreach (@filesToSaveForUpgrade) {
-	    renamef("$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_.mdkgiorig")
-	      if -e "$o->{prefix}$_.mdkgisave";
-	}
-
-	foreach (@filesNewerToUseAfterUpgrade) {
-	    if (-e "$o->{prefix}/$_.rpmnew" && -e "$o->{prefix}/$_") {
-		renamef("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgiorig");
-		renamef("$o->{prefix}/$_.rpmnew", "$o->{prefix}/$_");
-	    }
-	}
-    }
-
-    if ($o->{blank} || $o->{updatemodules}) {
-	my @l = detect_devices::floppies_dev();
-
-	foreach (qw(blank updatemodules)) {
-	    $o->{$_} eq "1" and $o->{$_} = $l[0] || die _("No floppy drive available");
-	}
-
-	$o->{blank} and $o->copyKernelFromFloppy();
-	$o->{updatemodules} and $o->updateModulesFromFloppy();
-    }
-}
-
-sub copyKernelFromFloppy {
-    my ($o) = @_;
-    return if $::testing || !$o->{blank};
-
-    fs::mount($o->{blank}, "/floppy", "vfat", 0);
-    eval { cp_af("/floppy/vmlinuz", "$o->{prefix}/boot/vmlinuz-default") };
-    if ($@) {
-	log::l("copying of /floppy/vmlinuz from blank modified disk failed: $@");
-    }
-    fs::umount("/floppy");
-}
-
-sub install_urpmi {
-    my ($o) = @_;
-
-    my $pkg = pkgs::packageByName($o->{packages}, 'urpmi');
-    if ($pkg && pkgs::packageSelectedOrInstalled($pkg)) {
-	install_any::install_urpmi($o->{prefix}, 
-				   $::oem ? 'cdrom' : $o->{method}, #- HACK
-				   $o->{packages}{mediums});
-	pkgs::saveCompssUsers($o->{prefix}, $o->{packages}, $o->{compssUsers}, $o->{compssUsersSorted});
-    }
-
-
-}
-
-sub updateModulesFromFloppy {
-    my ($o) = @_;
-    return if $::testing || !$o->{updatemodules};
-
-    fs::mount($o->{updatemodules}, "/floppy", "ext2", 0);
-    foreach (glob_("$o->{prefix}/lib/modules/*")) {
-	my ($kernelVersion) = m,lib/modules/(\S*),;
-	log::l("examining updated modules for kernel $kernelVersion");
-	if (-d "/floppy/$kernelVersion") {
-	    my @src_files = glob_("/floppy/$kernelVersion/*");
-	    my @dest_files = split "\n", `chroot $o->{prefix} find /lib/modules`;
-	    foreach my $s (@src_files) {
-		log::l("found updatable module $s");
-		my ($sfile, $sext) = $s =~ /([^\/\.]*\.o)(?:\.gz|\.bz2)?$/;
-		my $qsfile = quotemeta $sfile;
-		my $qsext = quotemeta $sext;
-		foreach my $target (@dest_files) {
-		    $target =~ /$qsfile/ or next;
-		    eval { cp_af($s, $target) };
-		    if ($@) {
-			log::l("updating module $target by $s failed: $@");
-		    } else {
-			log::l("updating module $target by $s");
-		    }
-		    if ($target !~ /$qsfile$qsext$/) {
-			#- extension differ, first rename target file correctly,
-			#- then uncompress source file, then compress it as expected.
-			my ($basetarget, $text) = $target =~ /(.*?)(\.gz|\.bz2)$/;
-			rename $target, "$basetarget$sext";
-			$sext eq '.gz' and run_program::run("gzip", "-d", "$basetarget$sext");
-			$sext eq '.bz2' and run_program::run("bzip2", "-d", "$basetarget$sext");
-			$text eq '.gz' and run_program::run("gzip", $basetarget);
-			$text eq '.bz2' and run_program::run("bzip2", $basetarget);
-		    }
-		}
-	    }
-	}
-    }
-    fs::umount("/floppy");
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse($) {
-    my ($o) = @_;
-}
-
-#------------------------------------------------------------------------------
-sub configureNetwork {
-    my ($o) = @_;
-    require network;
-    network::configureNetwork2($o, $o->{prefix}, $o->{netc}, $o->{intf});
-    if ($o->{method} =~ /ftp|http|nfs/) {
-	$o->{netcnx}{type} = 'lan';
-	foreach ("up", "down") {
-	    my $f = "$o->{prefix}/etc/sysconfig/network-scripts/net_cnx_$_";
-	    output $f, "\nif$_ eth0\n";
-	    chmod 0755, $f;
-	}
-	output "$o->{prefix}/etc/sysconfig/network-scripts/net_cnx_pg", "\n/usr/sbin/draknet\n";
-    }
-}
-
-#------------------------------------------------------------------------------
-sub installCrypto {
-    my ($o) = @_;
-    my $u = $o->{crypto} or return; $u->{mirror} && $u->{packages} or return;
-
-    upNetwork($o);
-    require crypto;
-    my @crypto_packages = crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror});
-    $o->pkg_install(@{$u->{packages}});
-}
-
-sub installUpdates {
-    my ($o) = @_;
-    my $u = $o->{updates} or return; $u->{updates} or return;
-
-    upNetwork($o);
-    require crypto;
-    crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror}) and
-	$o->pkg_install(@{$u->{packages} || []});
-
-    #- re-install urpmi with update security medium.
-    $o->install_urpmi;
-}
-
-sub summary {
-    my ($o) = @_;
-    configureTimezone($o);
-    configurePrinter($o) if $o->{printer};
-}
-
-#------------------------------------------------------------------------------
-sub configureTimezone {
-    my ($o) = @_;
-    install_any::preConfigureTimezone($o);
-
-    $o->pkg_install('ntp') if $o->{timezone}{ntp};
-
-    require timezone;
-    timezone::write($o->{prefix}, $o->{timezone});
-}
-
-#------------------------------------------------------------------------------
-sub configureServices {
-    my ($o) = @_;
-    if ($o->{services}) {
-	require services;
-	services::doit($o, $o->{services}, $o->{prefix});
-    }
-}
-#------------------------------------------------------------------------------
-sub configurePrinter {
-    my($o) = @_;
-    $o->do_pkgs->install('foomatic', 'printer-utils','printer-testpages',
-			 if_($o->do_pkgs->is_installed('gimp'), 'gimpprint'));
-    
-    require printer;
-    eval { add2hash($o->{printer} ||= {}, printer::getinfo($o->{prefix})) }; #- get existing configuration.
-
-    require printerdrake;
-    printerdrake::install_spooler($o->{printer}, $o); #- not interactive...
-
-    foreach (values %{$o->{printer}{configured} || {}}) {
-	log::l("configuring printer queue " . $_->{queuedata}{queue} || $_->{QUEUE});
-	#- when copy is so adul�e (sorry french taste :-)
-	#- and when there are some configuration in one place and in another place...
-	$o->{printer}{currentqueue} = {};
-	printer::copy_printer_params($_->{queuedata}, $o->{printer}{currentqueue});
-	printer::copy_printer_params($_, $o->{printer});
-	#- setup all configured queues, which is not the case interactively where
-	#- only the working queue is setup on configuration.
-	printer::configure_queue($o->{printer});
-    }
-}
-
-#------------------------------------------------------------------------------
-sub setRootPassword {
-    my ($o) = @_;
-    my $p = $o->{prefix};
-    my $u = $o->{superuser} ||= {};
-    $o->{superuser}{name} = 'root';
-    any::write_passwd_user($o->{prefix}, $o->{superuser}, $o->{authentication}{md5});
-    delete $o->{superuser}{name};
-}
-
-#------------------------------------------------------------------------------
-
-sub addUser {
-    my ($o) = @_;
-    my $p = $o->{prefix};
-    my $users = $o->{users} ||= [];
-
-    my (%uids, %gids); 
-    foreach (glob_("$p/home")) { my ($u, $g) = (stat($_))[4,5]; $uids{$u} = 1; $gids{$g} = 1; }
-
-    foreach (@$users) {
-	$_->{home} ||= "/home/$_->{name}";
-
-	my $u = $_->{uid} || ($_->{oldu} = (stat("$p$_->{home}"))[4]);
-	my $g = $_->{gid} || ($_->{oldg} = (stat("$p$_->{home}"))[5]);
-	#- search for available uid above 501 else initscripts may fail to change language for KDE.
-	if (!$u || getpwuid($u)) { for ($u = 501; getpwuid($u) || $uids{$u}; $u++) {} }
-	if (!$g                ) { for ($g = 501; getgrgid($g) || $gids{$g}; $g++) {} }
-	
-	$_->{uid} = $u; $uids{$u} = 1;
-	$_->{gid} = $g; $gids{$g} = 1;
-
-	push @{$_->{groups} ||= []}, 'usb' if $o->{security} <= 3;
-    }
-
-    any::write_passwd_user($p, $_, $o->{authentication}{md5}) foreach @$users;
-
-    local *F;
-    open F, ">> $p/etc/group" or die "can't append to group file: $!";
-    print F "$_->{name}:x:$_->{gid}:\n" foreach grep { ! getgrgid($_->{gid}) } @$users;
-
-    foreach my $u (@$users) {
-	if (! -d "$p$u->{home}") {
-	    my $mode = $o->{security} < 2 ? 0755 : 0750;
-	    eval { cp_af("$p/etc/skel", "$p$u->{home}") };
-	    if ($@) {
-		log::l("copying of skel failed: $@"); mkdir("$p$u->{home}", $mode); 
-	    } else {
-		chmod $mode, "$p$u->{home}";
-	    }
-	}
-	require commands;
-	eval { commands::chown_("-r", "$u->{uid}.$u->{gid}", "$p$u->{home}") }
-	    if $u->{uid} != $u->{oldu} || $u->{gid} != $u->{oldg};
-    }
-    any::addUsers($p, $users);
-
-    $o->pkg_install("autologin") if $o->{autologin};
-    any::set_autologin($p, $o->{autologin}, $o->{desktop});
-
-    install_any::setAuthentication($o);
-
-    install_any::disable_user_view($p) if @$users == ();
-}
-
-#------------------------------------------------------------------------------
-sub createBootdisk($) {
-    my ($o) = @_;
-    my $dev = $o->{mkbootdisk} or return;
-
-    my @l = detect_devices::floppies_dev();
-
-    $dev = shift @l || die _("No floppy drive available")
-      if $dev eq "1"; #- special case meaning autochoose
-
-    return if $::testing;
-
-    require bootloader;
-    bootloader::mkbootdisk($o->{prefix}, install_any::kernelVersion($o), $dev, $o->{bootloader}{perImageAppend});
-    $o->{mkbootdisk} = $dev;
-}
-
-#------------------------------------------------------------------------------
-sub readBootloaderConfigBeforeInstall {
-    my ($o) = @_;
-    my ($image, $v);
-
-    require bootloader;
-    add2hash($o->{bootloader} ||= {}, bootloader::read($o->{prefix}, arch() =~ /sparc/ ? "/etc/silo.conf" : arch() =~ /ppc/ ? "/etc/yaboot.conf" : "/etc/lilo.conf"));
-
-    #- since kernel or kernel-smp may not be upgraded, it should be checked
-    #- if there is a need to update existing lilo.conf entries by following
-    #- symlinks before kernel or other packages get installed.
-    #- update everything that could be a filename (for following symlink).
-    foreach my $e (@{$o->{bootloader}{entries}}) {
-	while (my $v = readlink "$o->{prefix}/$e->{kernel_or_dev}") {
-	    $v = "/boot/$v" if $v !~ m|^/|; -e "$o->{prefix}$v" or last;
-	    log::l("renaming /boot/$e->{kernel_or_dev} entry by $v");
-	    $e->{kernel_or_dev} = $v;
-	}
-	while (my $v = readlink "$o->{prefix}/$e->{initrd}") {
-	    $v = "/boot/$v" if $v !~ m|^/|; -e "$o->{prefix}$v" or last;
-	    log::l("renaming /boot/$e->{initrd} entry by $v");
-	    $e->{initrd} = $v;
-	}
-    }
-}
-
-sub setupBootloaderBefore {
-    my ($o) = @_;
-
-    require bootloader;
-    if (my @l = (grep { $_->{interface_type} eq 'ide' } detect_devices::burners(), detect_devices::raw_zips())) {
-	bootloader::add_append($o->{bootloader}, $_->{device}, 'ide-scsi') foreach @l;
-    }
-    if ($o->{miscellaneous}{HDPARM}) {
-	bootloader::add_append($o->{bootloader}, $_, 'autotune') foreach grep { /ide.*/ } all("/proc/ide");
-    }
-    if (grep { /mem=nopentium/ } cat_("/proc/cmdline")) {
-	bootloader::add_append($o->{bootloader}, 'mem', 'nopentium');
-    }
-
-    if (arch() =~ /alpha/) {
-	if (my $dev = fsedit::get_root($o->{fstab})) {
-	    $o->{bootloader}{boot} ||= "/dev/$dev->{rootDevice}";
-	    $o->{bootloader}{root} ||= "/dev/$dev->{device}";
-	    $o->{bootloader}{part_nb} ||= first($dev->{device} =~ /(\d+)/);
-	}
-    } else {
-	#- check for valid fb mode to enable a default boot with frame buffer.
-	my $vga = $o->{allowFB} && (!detect_devices::matching_desc('3D Rage LT') &&
-				    !detect_devices::matching_desc('Rage Mobility [PL]') &&
-				    !detect_devices::matching_desc('i740') &&
-				    !detect_devices::matching_desc('Matrox') &&
-				    !detect_devices::matching_desc('Tseng.*ET6\d00') &&
-				    !detect_devices::matching_desc('SiS.*SG86C2.5') &&
-				    !detect_devices::matching_desc('SiS.*559[78]') &&
-				    !detect_devices::matching_desc('SiS.*300') &&
-				    !detect_devices::matching_desc('SiS.*540') &&
-				    !detect_devices::matching_desc('SiS.*6C?326') &&
-				    !detect_devices::matching_desc('SiS.*6C?236') &&
-				    !detect_devices::matching_desc('Voodoo [35]|Voodoo Banshee') && #- 3d acceleration seems to bug in fb mode
-				    !detect_devices::matching_desc('8281[05].* CGC') #- i810 now have FB support during install but we disable it afterwards
-				   );
-	my $force_vga = $o->{allowFB} && (detect_devices::matching_desc('SiS.*630') || #- SiS 630 need frame buffer.
-					  detect_devices::matching_desc('GeForce.*Integrated') #- needed for fbdev driver (hack).
-					 );
-
-	#- propose the default fb mode for kernel fb, if aurora or bootsplash is installed.
-	my $need_fb = grep {
-	    my $p = pkgs::packageByName($o->{packages}, $_);
-	    $p && pkgs::packageFlagInstalled($p);
-	} 'Aurora', 'bootsplash';
-        bootloader::suggest($o->{prefix}, $o->{bootloader}, $o->{all_hds}{hds}, $o->{fstab},
-			    ($force_vga || $vga && $need_fb) && $o->{vga}, $o->{meta_class} ne 'server');
-	bootloader::suggest_floppy($o->{bootloader}) if $o->{security} <= 3 && arch() !~ /ppc/;
-
-	$o->{bootloader}{keytable} ||= keyboard::keyboard2kmap($o->{keyboard});
-    }
-}
-
-sub setupBootloader($) {
-    my ($o) = @_;
-    return if $::g_auto_install;
-
-    if (arch() =~ /alpha/) {
-	return if $::testing;
-	my $b = $o->{bootloader};
-	$b->{boot} or $o->ask_warn('', "Can't install aboot, not a bsd disklabel"), return;
-		
-	run_program::rooted($o->{prefix}, "swriteboot", $b->{boot}, "/boot/bootlx") or do {
-	    cdie "swriteboot failed";
-	    run_program::rooted($o->{prefix}, "swriteboot", "-f1", $b->{boot}, "/boot/bootlx");
-	};
-	run_program::rooted($o->{prefix}, "abootconf", $b->{boot}, $b->{part_nb});
- 
-        modules::load('loop');
-	output "$o->{prefix}/etc/aboot.conf", 
-	map_index { -e "$o->{prefix}/boot/initrd-$_->[1]" ? 
-			    "$::i:$b->{part_nb}$_->[0] root=$b->{root} initrd=/boot/initrd-$_->[1] $b->{perImageAppend}\n" :
-			    "$::i:$b->{part_nb}$_->[0] root=$b->{root} $b->{perImageAppend}\n" }
-	map { run_program::rooted($o->{prefix}, "mkinitrd", "-f", "/boot/initrd-$_->[1]", "--ifneeded", $_->[1]) ;#or
-	  #unlink "$o->{prefix}/boot/initrd-$_->[1]";$_ } grep { $_->[0] && $_->[1] }
-	  $_ } grep { $_->[0] && $_->[1] }
-	map { [ m|$o->{prefix}(/boot/vmlinux-(.*))| ] } glob_("$o->{prefix}/boot/vmlinux-*");
-#	output "$o->{prefix}/etc/aboot.conf", 
-#	  map_index { "$::i:$b->{part_nb}$_ root=$b->{root} $b->{perImageAppend}\n" }
-#	    map { /$o->{prefix}(.*)/ } eval { glob_("$o->{prefix}/boot/vmlinux*") };
-    } else {
-	require bootloader;
-	bootloader::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{all_hds}{hds});
-    }
-}
-
-#------------------------------------------------------------------------------
-sub configureXBefore {
-    my ($o) = @_;
-    my $xkb = $o->{X}{keyboard}{xkb_keymap} || keyboard::keyboard2xkb($o->{keyboard});
-    $xkb = '' if !($xkb && $xkb =~ /([^(]*)/ && -e "$o->{prefix}/usr/X11R6/lib/X11/xkb/symbols/$1");
-    if (!$xkb && (my $f = keyboard::xmodmap_file($o->{keyboard}))) {
-	cp_af($f, "$o->{prefix}/etc/X11/xinit/Xmodmap");	
-	$xkb = '';
-    }
-    {
-	my $f = "$o->{prefix}/etc/sysconfig/i18n";
-	setVarsInSh($f, add2hash_({ XKB_IN_USE => $xkb ? '': 'no' }, { getVarsFromSh($f) }));
-    }
-    $o->{X}{keyboard}{xkb_keymap} = $xkb;
-    $o->{X}{mouse} = $o->{mouse};
-    $o->{X}{wacom} = $o->{wacom};
-
-    require Xconfig;
-    Xconfig::getinfoFromDDC($o->{X});
-    Xconfig::getinfoFromXF86Config($o->{X}, $o->{prefix}); #- take default from here at least.
-
-    #- keep this here if the package has to be updated.
-    $o->pkg_install("XFree86");
-}
-sub configureX {
-    my ($o) = @_;
-    $o->configureXBefore;
-
-    require Xconfigurator;
-    require class_discard;
-    { local $::testing = 0; #- unset testing
-      local $::auto = 1;
-      $o->{X}{skiptest} = 1;
-      Xconfigurator::main($o->{prefix}, $o->{X}, class_discard->new, $o->do_pkgs,
-			  { allowFB          => $o->{allowFB},
-			    allowNVIDIA_rpms => install_any::allowNVIDIA_rpms($o->{packages}),
-			  });
-    }
-    $o->configureXAfter;
-}
-sub configureXAfter {
-    my ($o) = @_;
-    if ($o->{X}{card}{server} eq 'FBDev') {
-	unless (install_any::setupFB($o, Xconfigurator::getVGAMode($o->{X}))) {
-	    log::l("disabling automatic start-up of X11 if any as setup framebuffer failed");
-	    any::runlevel($o->{prefix}, 3) unless $::testing; #- disable automatic start-up of X11 on error.
-	}
-    }
-    if ($o->{X}{default_depth} >= 16 && $o->{X}{card}{default_wres} >= 1024) {
-	log::l("setting large icon style for kde");
-	install_any::kderc_largedisplay($o->{prefix});
-    }
-}
-
-#------------------------------------------------------------------------------
-sub miscellaneousBefore {
-    my ($o) = @_;
-
-    my %s = getVarsFromSh("$o->{prefix}/etc/sysconfig/system");
-    $o->{miscellaneous}{HDPARM} = $s{HDPARM} if exists $s{HDPARM};
-    $o->{security} ||= any::get_secure_level($o->{prefix}) || ($o->{meta_class} eq 'server' ? 3 : 2);
-
-    log::l("security $o->{security}");
-
-    add2hash_($o->{miscellaneous} ||= {}, { numlock => !detect_devices::isLaptop() });
-}
-sub miscellaneous {
-    my ($o) = @_;
-    #- keep some given parameters
-    #-TODO
-}
-sub miscellaneousAfter {
-    my ($o) = @_;
-    add2hash_ $o, { useSupermount => 1 && $o->{security} < 4 && arch() !~ /sparc/ && !$::corporate };
-
-    $ENV{SECURE_LEVEL} = $o->{security}; #- deprecated with chkconfig 1.3.4-2mdk, uses /etc/sysconfig/msec
-
-    addToBeDone {
-	mkdir_p("$o->{prefix}/etc/security/msec");
-	symlink "server.$o->{security}", "$o->{prefix}/etc/security/msec/server" if $o->{security} > 3;
-	setVarsInSh("$o->{prefix}/etc/sysconfig/msec", { SECURE_LEVEL => $o->{security} });
-    } 'formatPartitions';
-
-    addToBeDone {
-	setVarsInSh("$o->{prefix}/etc/sysconfig/system", { 
-            CLASS => $::expert && 'expert' || 'beginner',
-            SECURITY => $o->{security},
-	    META_CLASS => $o->{meta_class} || 'PowerPack',
-        });
-	substInFile { s/KEYBOARD_AT_BOOT=.*/KEYBOARD_AT_BOOT=yes/ } "$o->{prefix}/etc/sysconfig/usb" if detect_devices::usbKeyboards();
-
-    } 'installPackages';
-}
-
-#------------------------------------------------------------------------------
-sub exitInstall { 
-    my ($o) = @_;
-    eval { 
-	my $report = '/root/drakx/report.bug';
-	output "$o->{prefix}$report", install_any::report_bug($o->{prefix});
-	run_program::rooted($o->{prefix}, 'gzip', $report);
-    };
-    install_any::getAndSaveAutoInstallFloppy($o, 1, "$o->{prefix}/root/drakx/replay_install.img" );
-    eval { output "$o->{prefix}/root/drakx/README", "This directory contains several installation-related files,
-mostly log files (very useful if you ever report a bug!).
-
-Beware that some Mandrake tools rely on the contents of some
-of these files... so remove any file from here at your own
-risk!
-" };
-    install_any::unlockCdrom;
-    install_any::log_sizes($o);
-}
-
-#------------------------------------------------------------------------------
-sub hasNetwork {
-    my ($o) = @_;
-    $o->{netcnx}{type} && $o->{netc}{NETWORKING} ne 'no' and return 1;
-    log::l("no network seems to be configured for internet ($o->{netcnx}{type},$o->{netc}{NETWORKING})");
-    0;
-}
-
-#------------------------------------------------------------------------------
-sub upNetwork {
-    my ($o, $pppAvoided) = @_;
-
-    #- do not destroy this file if prefix is '' or even '/' (could it happens ?).
-    if (length($o->{prefix}) > 1) {
-	symlinkf("$o->{prefix}/etc/$_", "/etc/$_") foreach (qw(resolv.conf protocols services));
-    }
-    member($o->{method}, qw(ftp http nfs)) and return 1;
-    modules::write_conf($o->{prefix});
-    if (hasNetwork($o)) {
-	if ($o->{netcnx}{type} =~ /adsl|lan|cable/) {
-	    require network::netconnect;
-	    network::netconnect::start_internet($o);
-	    return 1;
-	} elsif (!$pppAvoided) {
-	    eval { modules::load(qw(serial ppp bsd_comp ppp_deflate)) };
-	    run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/syslog", "start");
-	    require network::netconnect;
-	    network::netconnect::start_internet($o);
-	    return 1;
-	}
-    }
-    $::testing;
-}
-
-#------------------------------------------------------------------------------
-sub downNetwork {
-    my ($o, $costlyOnly) = @_;
-
-    $o->{method} eq "ftp" || $o->{method} eq "http" || $o->{method} eq "nfs" and return 1;
-    modules::write_conf($o->{prefix});
-    if (hasNetwork($o)) {
-	if (!$costlyOnly) {
-	    require network::netconnect;
-	    network::netconnect::stop_internet($o);
-	    return 1;
-	} elsif ($o->{netc}{type} !~ /adsl|lan|cable/) {
-	    require network::netconnect;
-	    network::netconnect::stop_internet($o);
-	    run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/syslog", "stop");
-	    eval { modules::unload(qw(ppp_deflate bsd_comp ppp serial)) };
-	    return 1;
-	}
-    }
-    $::testing;
-}
-
-#------------------------------------------------------------------------------
-sub cleanIfFailedUpgrade($) {
-    my ($o) = @_;
-
-    #- if an upgrade has failed, there should be .mdkgisave files around.
-    if ($o->{isUpgrade}) {
-	foreach (@filesToSaveForUpgrade) {
-	    if (-e "$o->{prefix}/$_" && -e "$o->{prefix}/$_.mdkgisave") {
-		rename "$o->{prefix}/$_", "$o->{prefix}/$_.mdkginew"; #- keep new files around in case !
-		rename "$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_";
-	    }
-	}
-    }
-}
-
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/install_steps_auto_install.pm b/perl-install/install_steps_auto_install.pm
deleted file mode 100644
index cd0282800..000000000
--- a/perl-install/install_steps_auto_install.pm
+++ /dev/null
@@ -1,111 +0,0 @@
-package install_steps_auto_install; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA $graphical @graphical_steps);
-
-@ISA = qw(install_steps);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use install_steps;
-
-sub new {
-    my ($type, $o) = @_;
-
-    # Handle legacy options
-    $o->{interactive} ||= 'gtk' if $graphical || !is_empty_array_ref($o->{interactiveSteps});
-    push @{$o->{interactiveSteps}}, qw(installPackages exitInstall), @graphical_steps;
-
-    if ($o->{interactive}) {
-        my $interactiveClass = "install_steps_$o->{interactive}";
-	require"$interactiveClass.pm"; #- no space to skip perl2fcalls
-
-	@ISA = ($interactiveClass, @ISA);
-
-	for (my $f = $o->{steps}{first}; $f; $f = $o->{steps}{$f}{next}) {
-	    my $auto_name = member($f, @{$o->{interactiveSteps}}) ? 'noauto' : 'auto';
-	    $o->{steps}{$f}{$auto_name} = 1;
-	}
-
-	goto &{$::{$interactiveClass . "::"}{new}};
-    } else {
-	@ISA = ('install_steps_auto_install_non_interactive', @ISA);
-	(bless {}, ref $type || $type)->install_steps::new($o);
-    }
-}
-
-
-sub exitInstall {
-    my ($o, $alldone) = @_;
-    return if $o->{autoExitInstall};
-
-    if ($o->{interactive}) {
-	$o->SUPER::exitInstall($alldone);
-    } else {
-	install_steps::exitInstall($o);
-	print "\a";
-	print "Auto installation complete (the postInstall is not done yet though)\n";
-	print "Press <Enter> to reboot\n";
-	<STDIN>;
-    }
-}
-
-
-#-######################################################################################
-#- install_steps_auto_install_non_interactive package
-#-######################################################################################
-package install_steps_auto_install_non_interactive;
-
-use install_steps;
-use lang;
-use modules;
-use common;
-use log;
-
-sub configureNetwork {
-    my ($o) = @_;
-    modules::load_category('network/main|usb');
-    goto &install_steps::configureNetwork;
-}
-
-sub enteringStep {
-    my ($o, $step) = @_;
-    my ($s, $t) = (__("Entering step `%s'\n"), $o->{steps}{$step}{text});
-    ($s, $t) = (translate($s), translate($t)) if $ENV{LANG} !~ /ja|ko|zh/;
-    print sprintf($s, $t);
-    $o->install_steps::enteringStep($step);
-}
-
-sub ask_warn {
-    log::l(ref $_[1] ? join " ", @{$_[1]} : $_[1]);
-}
-
-sub wait_message {}
-
-sub errorInStep {
-    print "error :(\n"; 
-    print "switch to console f2 for a shell\n";
-    print "Press <Enter> to reboot\n";
-    <STDIN>;
-    c::_exit(0);
-}
-
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
-    my ($o) = @_;
-    $o->install_steps::selectLanguage;
-    lang::load_console_font($o->{lang});
-}
-
-sub installPackages {
-    my ($o, $packages) = @_;
-    catch_cdie { $o->install_steps::installPackages($packages) } sub { print "$@\n"; 1 }
-}
-
-1;
diff --git a/perl-install/install_steps_gtk.pm b/perl-install/install_steps_gtk.pm
deleted file mode 100644
index 5bebf5c84..000000000
--- a/perl-install/install_steps_gtk.pm
+++ /dev/null
@@ -1,703 +0,0 @@
-package install_steps_gtk; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(install_steps_interactive interactive_gtk);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use install_steps_interactive;
-use interactive_gtk;
-use common;
-use my_gtk qw(:helpers :wrappers);
-use Gtk;
-use devices;
-use modules;
-use install_gtk;
-use install_any;
-use mouse;
-use help;
-use log;
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub new($$) {
-    my ($type, $o) = @_;
-
-    my $old = $SIG{__DIE__};
-    $SIG{__DIE__} = sub { $_[0] !~ /my_gtk\.pm/ and goto $old };
-
-    $ENV{DISPLAY} ||= $o->{display} || ":0";
-    unless ($::testing) {
-	if ($ENV{DISPLAY} eq ":0" && !$::live) {
-	    my $f = "/tmp/Xconf";
-	    install_gtk::createXconf($f, @{$o->{mouse}}{"XMOUSETYPE", "device"}, $o->{wacom}[0]);
-	    devices::make("/dev/kbd");
-
-	    local (*T1, *T2);
-	    open T1, ">/dev/tty5";
-	    open T2, ">/dev/tty6";
-
-	    my $launchX = sub {
-		my $ok = 1;
-		my $xpmac_opts = cat_("/proc/cmdline");
-		unless (-d "/var/log" ) { mkdir("/var/log"); }
-		local $SIG{CHLD} = sub { $ok = 0 if waitpid(-1, c::WNOHANG()) > 0 };
-		unless (fork) {
-		    exec $_[0], (arch() =~ /^sparc/ || arch() eq "ppc" ? () : ("-kb")), "-dpms","-s" ,"240",
-		      ($_[0] =~ /Xpmac/ ? $xpmac_opts !~ /ofonly/ ? ("-mode", "17", "-depth", "32") : ("-mach64"):()),
-		      ($_[0] =~ /Xsun/ || $_[0] =~ /Xpmac/ ? ("-fp", "/usr/X11R6/lib/X11/fonts:unscaled") :
-		       ("-allowMouseOpenFail", "-xf86config", $f)) or exit 1;
-		}
-		foreach (1..60) {
-		    sleep 1;
-		    log::l("Server died"), return 0 if !$ok;
-		    if (c::Xtest($ENV{DISPLAY})) {
-			fork || exec("aewm-drakx") || exec("true");
-			return 1;
-		    }
-		}
-		log::l("Timeout!!");
-		0;
-	    };
-	    my @servers = qw(FBDev VGA16); #-)
-	    if (arch() eq "alpha") {
-		require Xconfigurator;
-		my $card = Xconfigurator::cardConfigurationAuto();
-		Xconfigurator::updateCardAccordingName($card, $card->{type}) if $card && $card->{type};
-		@servers = $card->{server} || "TGA";
-		#-@servers = qw(SVGA 3DLabs TGA) 
-	    } elsif (arch() =~ /^sparc/) {
-		local $_ = cat_("/proc/fb");
-		if (/Mach64/) { @servers = qw(Mach64) }
-		elsif (/Permedia2/) { @servers = qw(3DLabs) }
-		else { @servers = qw(Xsun24) }
-	    } elsif (arch() =~ /ia64/) {
-		@servers= 'XFree86';
-	    } elsif (arch() eq "ppc") {
-	    	@servers = qw(Xpmac);
-            }
-
-	    foreach (@servers) {
-		log::l("Trying with server $_");
-		my $dir = "/usr/X11R6/bin";
-		my $prog = /Xsun|Xpmac|XFree86/ ? $_ : "XF86_$_";
-		unless (-x "$dir/$prog") {
-		    unlink $_ foreach glob_("$dir/X*");
-		    install_any::getAndSaveFile("Mandrake/mdkinst$dir/$prog", "$dir/$prog") or die "failed to get server $prog: $!";
-		    chmod 0755, "$dir/$prog";
-		}
-		if (/FB/) {
-		    !$o->{vga16} && $o->{allowFB} or next;
-
-		    $o->{allowFB} = &$launchX($prog) #- keep in mind FB is used.
-		      and goto OK;
-		} else {
-		    $o->{vga16} = 1 if /VGA16/;
-		    &$launchX($prog) and goto OK;
-		}
-	    }
-	    return undef;
-	}
-    }
-  OK:
-    install_gtk::init_sizes();
-    install_gtk::default_theme($o);
-    install_gtk::create_logo_window($o);
-
-    $my_gtk::force_center = [ $::rootwidth - $::windowwidth, $::logoheight, $::windowwidth, $::windowheight ];
-
-    $o = (bless {}, ref $type || $type)->SUPER::new($o);
-    $o->interactive_gtk::new;
-    $o;
-}
-
-sub enteringStep {
-    my ($o, $step) = @_;
-
-    printf "Entering step `%s'\n", $o->{steps}{$step}{text};
-    $o->SUPER::enteringStep($step);
-    install_gtk::create_steps_window($o);
-    install_gtk::create_help_window($o);
-}
-sub leavingStep {
-    my ($o, $step) = @_;
-    $o->SUPER::leavingStep($step);
-}
-
-
-sub charsetChanged {
-    my ($o) = @_;
-    Gtk->set_locale;
-    install_gtk::install_theme($o);
-    install_gtk::create_steps_window($o);
-}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
-    my ($o, $first_time) = @_;
-    $o->SUPER::selectLanguage;
-  
-    $o->ask_warn('',
-_("Your system is low on resources. You may have some problem installing
-Mandrake Linux. If that occurs, you can try a text install instead. For this,
-press `F1' when booting on CDROM, then enter `text'.")) if $first_time && availableRamMB() < 60; # 60MB
-
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass1 {
-    my ($o, $verif, $l, $def, $l2, $def2) = @_;
-    $::live || @$l == 1 and return $o->SUPER::selectInstallClass1($verif, $l, $def, $l2, $def2);
-
-    my $w = my_gtk->new(_("Install Class"));
-    my $focused;
-    gtkadd($w->{window},
-	   gtkpack($w->create_box_with_title(_("Please choose one of the following classes of installation:")),
-		   (my @radios = gtkradio($def, @$l)),
-		   gtkadd(create_vbox(),
-			  map { my $v = $_; 
-				my $b = new Gtk::Button(translate($_));
-				$focused = $b if $_ eq $def2;
-				gtksignal_connect($b, "clicked" => sub { $w->{retval} = $v; Gtk->main_quit });
-			    } @$l2)
-		  ));
-    $focused->grab_focus if $focused;
-    $w->main;
-
-    mapn { $verif->($_[1]) if $_[0]->active } \@radios, $l;
-    install_gtk::create_steps_window($o);
-
-    $w->{retval};
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
-    my ($o, $force) = @_;
-    my %old = %{$o->{mouse}};
-    $o->SUPER::selectMouse($force) or return;
-    my $mouse = $o->{mouse};
-    $mouse->{type} eq 'none' ||
-      $old{type}   eq $mouse->{type}   && 
-      $old{name}   eq $mouse->{name}   &&
-      $old{device} eq $mouse->{device} && !$force and return;
-
-    local $my_gtk::grab = 1; #- unsure a crazy mouse don't go wild clicking everywhere
-
-    while (1) {
-	log::l("telling X server to use another mouse");
-	eval { modules::load('serial') } if $mouse->{device} =~ /ttyS/;
-
-	if (!$::testing) {
-	    devices::make($mouse->{device});
-	    symlinkf($mouse->{device}, "/dev/mouse");
-	    c::setMouseLive($ENV{DISPLAY}, mouse::xmouse2xId($mouse->{XMOUSETYPE}), $mouse->{nbuttons} < 3);
-	}
-	mouse::test_mouse_install($mouse) and return;
-	$o->SUPER::selectMouse(1);
-	$mouse = $o->{mouse};
-    } 
-}
-
-#------------------------------------------------------------------------------
-sub chooseSizeToInstall {
-    my ($o, $packages, $min_size, $def_size, $max_size_, $availableC, $individual) = @_;
-    my $max_size = min($max_size_, $availableC);
-    my $enough = $max_size == $max_size_;
-    my $percentage = int 100 * $max_size / $max_size_;
-
-    #- don't ask anything if the difference between min and max is too small
-    log::l("chooseSizeToInstall: min_size=$min_size, def_size=$def_size, max_size=$max_size_, available=$availableC");
-    return $max_size if $min_size && $max_size / $min_size < 1.05;
-
-    log::l("choosing size to install between $min_size and $max_size");
-    my $w = my_gtk->new('');
-    my $adj = create_adjustment(int(100 * $def_size / $max_size_), $min_size * 100 / $max_size_, $percentage);
-    my $spin = gtkset_usize(new Gtk::SpinButton($adj, 0, 0), 20, 0);
-    my $val;
-
-    require pkgs;
-    gtkadd($w->{window},
-	  gtkpack(new Gtk::VBox(0,20),
-		  _("The total size for the groups you have selected is approximately %d MB.\n", pkgs::correctSize($max_size_ / sqr(1024))) .
-		  ($enough ?
-_("If you wish to install less than this size,
-select the percentage of packages that you want to install.
-
-A low percentage will install only the most important packages;
-a percentage of 100%% will install all selected packages.") : 
-_("You have space on your disk for only %d%% of these packages.
-
-If you wish to install less than this,
-select the percentage of packages that you want to install.
-A low percentage will install only the most important packages;
-a percentage of %d%% will install as many packages as possible.", $percentage, $percentage))
-. ($individual ? "\n\n" . _("You will be able to choose them more specifically in the next step.") : ''),
-		 create_packtable({},
-				  [ _("Percentage of packages to install") . '  ', $spin, "%", my $mb = new Gtk::Label ],
-				  [ undef, new Gtk::HScrollbar($adj) ],
-			       ),
-		 create_okcancel($w)
-		)
-	 );
-    $spin->signal_connect(changed => my $changed = sub { 
-	$val = $spin->get_value_as_int / 100 * $max_size_;
-	$mb->set(sprintf("(%dMB)", pkgs::correctSize($val / sqr(1024)))); 
-    }); &$changed();
-    $spin->signal_connect(activate => sub { $w->{retval} = 1; Gtk->main_quit });
-    $spin->grab_focus();
-    $w->main and $val + 1; #- add a single byte (hack?) to make selection of 0 bytes ok.
-}
-
-sub reallyChooseGroups {
-    my ($o, $size_to_display, $individual, $val) = @_;
-
-    my $w = my_gtk->new('');
-    my $tips = new Gtk::Tooltips;
-    my $w_size = new Gtk::Label(&$size_to_display);
-
-    my $entry = sub {
-	my ($e) = @_;
-	my $text = translate($o->{compssUsers}{$e}{label});
-	my $help = translate($o->{compssUsers}{$e}{descr});
-
-	my $file = do {
-	    my $f = "$ENV{SHARE_PATH}/icons/" . ($o->{compssUsers}{$e}{icons} || 'default');
-	    -e "$f.png" or $f .= "_section";
-	    -e "$f.png" or $f = "$ENV{SHARE_PATH}/icons/default_section";
-	    "$f.png";
-	};
-	my $check = Gtk::CheckButton->new($text);
-	$check->set_active($val->{$e});
-	$check->signal_connect(clicked => sub { 
-	    $val->{$e} = $check->get_active;
-	    $w_size->set(&$size_to_display);
-	});
-	gtkset_tip($tips, $check, $help);
-	gtkpack_(new Gtk::HBox(0,0), 0, gtkpng($file), 1, $check);
-	#$check;
-    };
-    my $entries_in_path = sub {
-	my ($path) = @_;
-	translate($path), map { $entry->($_) } grep { $o->{compssUsers}{$_}{path} eq $path } @{$o->{compssUsersSorted}};
-    };
-    gtkadd($w->{window},
-	   gtkpack($w->create_box_with_title(_("Package Group Selection")),
-		   gtkpack_(new Gtk::VBox(0,0),
-			   1, gtkpack_(new Gtk::HBox(0,0),
-			        $o->{meta_class} eq 'server' ? (
-				   1, gtkpack(new Gtk::VBox(0,0), 
-					   $entries_in_path->('Server'),
-					  ),
-				   1, gtkpack(new Gtk::VBox(0,0), 
-					   $entries_in_path->('Graphical Environment'),
-					   '',
-					   $entries_in_path->('Development'),
-					   '',
-					   $entries_in_path->('Utilities'),
-					  ),
-				) : (
-				   1, gtkpack(new Gtk::VBox(0,0), 
-					   $entries_in_path->('Workstation'),
-					   '',
-					   $entry->('Development|Development'),
-					   $entry->('Development|Documentation'),
-					  ),
-				   0, gtkpack(new Gtk::VBox(0,0), 
-					   $entries_in_path->('Server'),
-					   '',
-					   $entries_in_path->('Graphical Environment'),
-					  ),
-				),
-			   )),
-		   '',
-		   gtkadd(new Gtk::HBox(0,0),
-			  $w_size,
-			  if_($individual, do {
-			      my $check = Gtk::CheckButton->new(_("Individual package selection"));
-			      $check->set_active($$individual);
-			      $check->signal_connect(clicked => sub { $$individual = $check->get_active });
-			      $check;
-			  }),
-			  gtksignal_connect(new Gtk::Button(_("Ok")), clicked => sub { Gtk->main_quit }),
-			 ),
-		  ),
-	  );
-    $w->{rwindow}->set_default_size($::windowwidth * 0.8, $::windowheight * 0.8);
-    $w->main;
-    1;    
-}
-
-
-sub choosePackagesTree {
-    my ($o, $packages, $limit_to_medium) = @_;
-
-    my $available = install_any::getAvailableSpace($o);
-    my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024);
-
-    my $common; $common = { get_status => sub {
-				my $size = pkgs::selectedSize($packages);
-				_("Total size: %d / %d MB", pkgs::correctSize($size / sqr(1024)), $available / sqr(1024));
-			    },
-			    node_state => sub {
-				my $p = pkgs::packageByName($packages,$_[0]) or return;
-				pkgs::packageMedium($packages, $p)->{selected} or return;
-				pkgs::packageFlagBase($p) and return 'base';
-				pkgs::packageFlagInstalled($p) and return 'installed';
-				pkgs::packageFlagSelected($p) and return 'selected';
-				return 'unselected';
-			    },
-			    build_tree => sub {
-				my ($add_node, $flat) = @_;
-				if ($flat) {
-				    foreach (sort keys %{$packages->{names}}) {
-					!$limit_to_medium ||
-					  pkgs::packageMedium($packages, $packages->{names}{$_}) == $limit_to_medium or next;
-					$add_node->($_, undef);
-				    }
-				} else {
-				    foreach my $root (@{$o->{compssUsersSorted}}) {
-					my (%fl, @firstchoice, @others);
-					#$fl{$_} = $o->{compssUsersChoice}{$_} foreach @{$o->{compssUsers}{$root}{flags}}; #- FEATURE:improve choce of packages...
-					$fl{$_} = 1 foreach @{$o->{compssUsers}{$root}{flags}};
-					foreach my $p (values %{$packages->{names}}) {
-					    !$limit_to_medium || pkgs::packageMedium($packages, $p) == $limit_to_medium or next;
-					    my ($rate, @flags) = pkgs::packageRateRFlags($p);
-					    next if !($rate && grep { grep { !/^!/ && $fl{$_} } split('\|\|') } @flags);
-					    $rate >= 3 ?
-					      push(@firstchoice, pkgs::packageName($p)) :
-						push(@others,      pkgs::packageName($p));
-					}
-					my $root2 = join('|', map { translate($_) } split('\|', $root));
-					$add_node->($_, $root2                   ) foreach sort @firstchoice;
-					$add_node->($_, $root2 . '|' . _("Other")) foreach sort @others;
-				    }
-				}
-			    },
-			    get_info => sub {
-				my $p = pkgs::packageByName($packages, $_[0]) or return '';
-				pkgs::extractHeaders($o->{prefix}, [$p], $packages->{mediums});
-				pkgs::packageHeader($p) or die;
-
-				my $imp = translate($pkgs::compssListDesc{pkgs::packageFlagBase($p) ?
-									  5 : pkgs::packageRate($p)});
-
-				my $info = $@ ? _("Bad package") :
-				  (_("Name: %s\n", pkgs::packageName($p)) .
-				   _("Version: %s\n", pkgs::packageVersion($p) . '-' . pkgs::packageRelease($p)) .
-				   _("Size: %d KB\n", pkgs::packageSize($p) / 1024) .
-				   ($imp && _("Importance: %s\n", $imp)) . "\n" .
-				   formatLines(c::headerGetEntry(pkgs::packageHeader($p), 'description')));
-				pkgs::packageFreeHeader($p);
-				return $info;
-			    },
-			    toggle_nodes => sub {
-				my $set_state = shift @_;
-				my @n = map { pkgs::packageByName($packages, $_) } @_;
-				my %l;
-				my $isSelection = !pkgs::packageFlagSelected($n[0]);
-				foreach (@n) {
-				    pkgs::togglePackageSelection($packages, $_, my $l = {});
-				    @l{grep {$l->{$_}} keys %$l} = ();
-				}
-				if (my @l = keys %l) {
-				    #- check for size before trying to select.
-				    my $size = pkgs::selectedSize($packages);
-				    foreach (@l) {
-					my $p = $packages->{names}{$_};
-					pkgs::packageFlagSelected($p) or $size += pkgs::packageSize($p);
-				    }
-				    if (pkgs::correctSize($size / sqr(1024)) > $available / sqr(1024)) {
-					return $o->ask_warn('', _("You can't select this package as there is not enough space left to install it"));
-				    }
-
-				    @l > @n && $common->{state}{auto_deps} and
-				      $o->ask_okcancel('', [ $isSelection ? 
-							     _("The following packages are going to be installed") :
-							     _("The following packages are going to be removed"),
-							     common::formatList(20, sort @l) ], 1) || return;
-				    if ($isSelection) {
-					pkgs::selectPackage($packages, $_) foreach @n;
-				    } else {
-					pkgs::unselectPackage($packages, $_) foreach @n;
-				    }
-				    foreach (@l) {
-					my $p = pkgs::packageByName($packages, $_);
-					$set_state->($_, pkgs::packageFlagSelected($p) ? 'selected' : 'unselected');
-				    }
-				} else {
-				    $o->ask_warn('', _("You can't select/unselect this package"));
-				}
-			    },
-			    grep_allowed_to_toggle => sub {
-				grep { $_ ne _("Other") && !pkgs::packageFlagBase(pkgs::packageByName($packages, $_)) } @_;
-			    },
-			    grep_unselected => sub {
-				grep { !pkgs::packageFlagSelected(pkgs::packageByName($packages, $_)) } @_;
-			    },
-			    check_interactive_to_toggle => sub {
-				my $p = pkgs::packageByName($packages, $_[0]) or return;
-				if (pkgs::packageFlagBase($p)) {
-				    $o->ask_warn('', _("This is a mandatory package, it can't be unselected"));
-				} elsif (pkgs::packageFlagInstalled($p)) {
-				    $o->ask_warn('', _("You can't unselect this package. It is already installed"));
-				} elsif (pkgs::packageFlagUpgrade($p)) {
-				    if ($::expert) {
-					if (pkgs::packageFlagSelected($p)) {
-					    $o->ask_yesorno('', _("This package must be upgraded.\nAre you sure you want to deselect it?")) or return;
-					}
-					return 1;
-				    } else {
-					$o->ask_warn('', _("You can't unselect this package. It must be upgraded"));
-				    }
-				} else { return 1; }
-				return;
-			    },
-			    auto_deps => _("Show automatically selected packages"),
-			    ok => _("Install"),
-			    cancel => $limit_to_medium && _("Cancel"),
-			    icons => [ { icon         => 'floppy',
-					 help         => _("Load/Save on floppy"),
-					 wait_message => _("Updating package selection"),
-					 code         => sub { $o->loadSavePackagesOnFloppy($packages); 1; },
-				       }, 
-				       if_(0, 
-				       { icon         => 'feather',
-					 help         => _("Minimal install"),
-					 code         => sub {
-					     
-					     install_any::unselectMostPackages($o);
-					     pkgs::setSelectedFromCompssList($packages, { SYSTEM => 1 }, 4, $availableCorrected);
-					     1;
-					 } }),
-				     ],
-			    state => {
-				      auto_deps => 1,
-				      flat      => $limit_to_medium,
-				     },
-			  };
-
-    $o->set_help('choosePackagesTree');
-    $o->ask_browse_tree_info('', _("Choose the packages you want to install"), $common);
-}
-
-#------------------------------------------------------------------------------
-sub beforeInstallPackages {
-    my ($o) = @_;    
-    $o->SUPER::beforeInstallPackages;
-    install_any::copy_advertising($o);
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
-    my ($o, $packages) = @_;
-
-    my ($current_total_size, $last_size, $nb, $total_size, $start_time, $last_dtime, $trans_progress_total);
-
-    my $w = my_gtk->new(_("Installing"));
-    $w->sync;
-    my $text = new Gtk::Label;
-    my ($advertising, $change_time, $i);
-    my $show_advertising if 0;
-    $show_advertising = to_bool(@install_any::advertising_images) if !defined $show_advertising;
-    my ($msg, $msg_time_remaining, $msg_time_total) = map { new Gtk::Label($_) } '', (_("Estimating")) x 2;
-    my ($progress, $progress_total) = map { new Gtk::ProgressBar } (1..2);
-    $w->{rwindow}->set_policy(1, 1, 1);
-    gtkadd($w->{window}, my $box = new Gtk::VBox(0,10));
-    $box->pack_end(gtkshow(gtkpack(gtkset_usize(new Gtk::VBox(0,5), $::windowwidth * 0.8, 0),
-			   $msg, $progress,
-			   create_packtable({},
-					    [_("Time remaining "), $msg_time_remaining],
-#					    [_("Total time "), $msg_time_total],
-					   ),
-			   $text,
-			   $progress_total,
-			   gtkadd(create_hbox(),
-				  my $cancel = new Gtk::Button(_("Cancel")),
-				  my $details = new Gtk::Button(_("Details")),
-				  ),
-			  )), 0, 1, 0);
-    $details->hide if !@install_any::advertising_images;
-    $w->sync;
-    $msg->set(_("Please wait, preparing installation..."));
-    gtkset_mousecursor_normal($cancel->window);
-    gtkset_mousecursor_normal($details->window);
-    my $advertize = sub {
-	@install_any::advertising_images or return;
-	$show_advertising ? $_->hide : $_->show foreach $msg, $progress, $text;
-	gtkdestroy($advertising) if $advertising;
-	if ($show_advertising && $_[0]) {
-	    $change_time = time();
-	    my $f = $install_any::advertising_images[$i++ % @install_any::advertising_images];
-	    log::l("advertising $f");
-	    my $pl = $f; $pl =~ s/\.png$/\.pl/;
-	    my $icon_name = $f; $icon_name =~ s/\.png$/_icon\.png/;
-	    my ($draw_text, $width, $height, @data, $icon, $icon_dx, $icon_dy, $icon_px);
-	    -e $pl and $draw_text = 1;
-	    eval(cat_($pl)) if $draw_text;
-	    my ($pix, undef) = gtkcreate_png($f);
-	    if ($icon) {
-		($icon_px, undef) = gtkcreate_png($icon_name);
-	    }
-	    my $dbl_area;
-	    my $darea = new Gtk::DrawingArea;
-	    gtkpack($box, $advertising = !$draw_text ?
-		    gtkpng($f) :
-		    gtksignal_connect(gtkset_usize($darea, $width, $height), expose_event => sub {
-			       my ($dx, $dy) = ($darea->allocation->[2], $darea->allocation->[3]);
-			       if (!defined($dbl_area)) {
-				   $dbl_area = new Gtk::Gdk::Pixmap($darea->window, $dx, $dy);
-				   $dbl_area->draw_rectangle($darea->style->bg_gc('active'), 1, 0, 0, $dx, $dy);
-				   $dbl_area->draw_pixmap($darea->style->bg_gc('normal'),
-							  $pix, 0, 0, ($dx-$width)/2, 0, $width, $height);
-				   my $gc_text = new Gtk::Gdk::GC($darea->window);
-				   $gc_text->set_foreground(gtkcolor(65535, 65535, 65535));
-				   my $yicon = 0;
-				   my $decy = 0;
-				   my $first = 1;
-				   foreach (@data) {
-				       my ($text, $x, $y, $area_width, $area_height, $bold) = @$_;
-				       my ($width, $height, $lines, $widths, $heights, $ascents, $descents) =
-					 get_text_coord ($text, $darea, $area_width, $area_height, 1, 0, 1, 1);
-				       if ($first && $icon) {
-					   my $iconx = ($dx-$width)/2 + $x + ${$widths}[0] - $icon_dx;
-					   my $icony = $y + ${$heights}[0] - $icon_dy/2;
-					   $icony > 0 or $icony = 0;
-					   $dbl_area->draw_pixmap($darea->style->bg_gc('normal'), $icon_px, 0, 0,
-								  $iconx, $icony, $icon_dx, $icon_dy
-								 );
-					   $yicon = $icony + $icon_dy;
-				       }
-				       my $i = 0;
-				       $yicon > $y + ${$heights}[0] and $decy = $yicon - ($y + ${$heights}[$i]);
-				       foreach (@{$lines}) {
-					   $dbl_area->draw_string($darea->style->font, $gc_text,
-								  ($dx-$width)/2 + $x + ${$widths}[$i], ( $first ? 0 : $decy ) + $y + ${$heights}[$i], $_);
- 					   $bold and $dbl_area->draw_string($darea->style->font, $gc_text,
-									    ($dx-$width)/2 + $x + ${$widths}[$i] + 1, ( $first ? 0 : $decy ) + $y + ${$heights}[$i], $_);
-					   $i++;
-				       }
-				       $first = 0;
-				   }
-			       }
-			       $darea->window->draw_pixmap($darea->style->bg_gc('normal'),
-							   $dbl_area, 0, 0, 0, 0, $dx, $dy);
-			   }));
-	} else {
-	    $advertising = undef;
-	}
-    };
-
-    $cancel->signal_connect(clicked => sub { $pkgs::cancel_install = 1 });
-    $details->signal_connect(clicked => sub {
-	invbool \$show_advertising;
-	$advertize->(1);
-    });
-    $advertize->();
-
-    my $oldInstallCallback = \&pkgs::installCallback;
-    local *pkgs::installCallback = sub {
-	my $m = shift;
-	if ($m =~ /^Starting installation/) {
-	    $nb = $_[0];
-	    $total_size = $_[1]; $current_total_size = 0;
-	    $start_time = time();
-	    $msg->set(_("%d packages", $nb));
-	    $w->flush;
-	} elsif ($m =~ /^Starting installing package/) {
-	    $progress->update(0);
-	    my $name = $_[0];
-	    $msg->set(_("Installing package %s", $name));
-	    $current_total_size += $last_size;
-	    my $p = pkgs::packageByName($o->{packages}, $name);
-	    $last_size = c::headerGetEntry(pkgs::packageHeader($p), 'size');
-	    $text->set((split /\n/, c::headerGetEntry(pkgs::packageHeader($p), 'summary'))[0] || '');
-	    $advertize->(1) if $show_advertising && $total_size > 20_000_000 && time() - $change_time > 20;
-	    $w->flush;
-	} elsif ($m =~ /^Progressing installing package/) {
-	    $progress->update($_[2] ? $_[1] / $_[2] : 0);
-
-	    my $dtime = time() - $start_time;
-	    my $ratio = 
-	      $total_size == 0 ? 0 :
-		pkgs::size2time($current_total_size + $_[1], $total_size) / pkgs::size2time($total_size, $total_size);
-	    $ratio >= 1 and $ratio = 1;
-	    my $total_time = $ratio ? $dtime / $ratio : time();
-
-#-	    my $ratio2 = $total_size == 0 ? 0 : ($current_total_size + $_[1]) / $total_size;
-#-	    log::l(sprintf("XXXX advance %d %d %s", $current_total_size + $_[1], $dtime, formatTimeRaw($total_time)));
-
-	    $progress_total->update($ratio);
-	    if ($dtime != $last_dtime && $current_total_size > 80_000_000) {
-		$msg_time_total->set(formatTime(10 * round($total_time / 10) + 10));
-#-		$msg_time_total->set(formatTimeRaw($total_time) . "  " . formatTimeRaw($dtime / $ratio2));
-		$msg_time_remaining->set(formatTime(10 * round(max($total_time - $dtime, 0) / 10) + 10));
-		$last_dtime = $dtime;
-	    }
-	    $w->flush;
-	} else { unshift @_, $m; goto $oldInstallCallback }
-    };
-    #- the modification is not local as the box should be living for other package installation.
-    undef *install_any::changeMedium;
-    *install_any::changeMedium = sub {
-	my ($method, $medium) = @_;
-
-	#- if not using a cdrom medium, always abort.
-	if ($method eq 'cdrom' && !$::oem) {
-	    local $my_gtk::grab = 1;
-	    my $name = pkgs::mediumDescr($o->{packages}, $medium);
-	    local $| = 1; print "\a";
-	    my $time = time();
-	    my $r = $name !~ /commercial/i || ($o->{useless_thing_accepted2} ||= $o->ask_from_list_('', formatAlaTeX($install_steps_interactive::com_license), [ __("Accept"), __("Refuse") ], "Accept") eq "Accept");
-            $r &&= $o->ask_okcancel('', _("Change your Cd-Rom!
-
-Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.
-If you don't have it, press Cancel to avoid installation from this Cd-Rom.", $name), 1);
-            #- add the elapsed time (otherwise the predicted time will be rubbish)
-            $start_time += time() - $time;
-            return $r;
-	}
-    };
-    my $install_result;
-    catch_cdie { $install_result = $o->install_steps::installPackages($packages); }
-      sub {
-	  if ($@ =~ /^error ordering package list: (.*)/) {
-	      $o->ask_yesorno('', [
-_("There was an error ordering packages:"), $1, _("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  } elsif ($@ =~ /^error installing package list: (.*)/) {
-	      $o->ask_yesorno('', [
-_("There was an error installing packages:"), $1, _("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  }
-	  0;
-      };
-    if ($pkgs::cancel_install) {
-	$pkgs::cancel_install = 0;
-	die 'already displayed';
-    }
-    $w->destroy;
-    $install_result;
-}
-
-sub set_help {
-    my ($o, @l) = @_;
-
-    my @l2 = map { 
-	join("\n\n", map { s/\n/ /mg; $_ } split("\n\n", translate($help::steps{$_})))
-    } @l;
-    $o->{current_help} = join("\n\n\n", @l2);
-    gtktext_insert($o->{help_window_text}, $o->{current_help});
-    1;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
deleted file mode 100644
index 7fe82508d..000000000
--- a/perl-install/install_steps_interactive.pm
+++ /dev/null
@@ -1,1354 +0,0 @@
-package install_steps_interactive; # $Id$
-
-
-use diagnostics;
-use strict;
-use vars qw(@ISA $new_bootstrap $com_license);
-
-@ISA = qw(install_steps);
-
-$com_license = _("
-Warning
-
-Please read carefully the terms below. If you disagree with any
-portion, you are not allowed to install the next CD media. Press 'Refuse' 
-to continue the installation without using these media.
-
-
-Some components contained in the next CD media are not governed
-by the GPL License or similar agreements. Each such component is then
-governed by the terms and conditions of its own specific license. 
-Please read carefully and comply with such specific licenses before 
-you use or redistribute the said components. 
-Such licenses will in general prevent the transfer,  duplication 
-(except for backup purposes), redistribution, reverse engineering, 
-de-assembly, de-compilation or modification of the component. 
-Any breach of agreement will immediately terminate your rights under 
-the specific license. Unless the specific license terms grant you such
-rights, you usually cannot install the programs on more than one
-system, or adapt it to be used on a network. In doubt, please contact 
-directly the distributor or editor of the component. 
-Transfer to third parties or copying of such components including the 
-documentation is usually forbidden.
-
-
-All rights to the components of the next CD media belong to their 
-respective authors and are protected by intellectual property and 
-copyright laws applicable to software programs.
-");
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use install_steps;
-use install_interactive;
-use install_any;
-use detect_devices;
-use run_program;
-use devices;
-use fsedit;
-use loopback;
-use mouse;
-use modules;
-use lang;
-use keyboard;
-use any;
-use fs;
-use log;
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub errorInStep($$) {
-    my ($o, $err) = @_;
-    $o->ask_warn(_("Error"), [ _("An error occurred"), formatError($err) ]);
-}
-
-sub kill_action {
-    my ($o) = @_;
-    $o->kill;
-}
-
-sub charsetChanged {}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-#------------------------------------------------------------------------------
-sub selectLanguage {
-    my ($o) = @_;
-
-    $o->{lang} = any::selectLanguage($o, $o->{lang}, $o->{langs} ||= {})
-      || return $o->ask_yesorno('', _("Do you really want to leave the installation?")) ? $o->exit : &selectLanguage;
-    install_steps::selectLanguage($o);
-
-    $o->charsetChanged;
-
-    if ($o->isa('interactive_gtk')) {
-	$o->ask_warn('', formatAlaTeX(
-"If you see this message it is because you chose a language for
-which DrakX does not include a translation yet; however the fact
-that it is listed means there is some support for it anyway.
-
-That is, once GNU/Linux will be installed, you will be able to at
-least read and write in that language; and possibly more (various
-fonts, spell checkers, various programs translated etc. that
-varies from language to language).")) if $o->{lang} !~ /^en/ && !lang::load_mo();
-    } else {
-	#- don't use _( ) for this, as it is never translated
-	$o->ask_warn('', "The characters of your language can't be displayed in console,
-so the messages will be displayed in english during installation") if $ENV{LANGUAGE} eq 'C';
-    }
-    
-sub acceptLicence {
-    my ($o) = @_;
-    unless ($o->{useless_thing_accepted}) {
-	$o->set_help('license');
-	$o->{useless_thing_accepted} = $o->ask_from_list_(_("License agreement"), formatAlaTeX(
-_("Introduction
-
-The operating system and the different components available in the Mandrake Linux distribution 
-shall be called the \"Software Products\" hereafter. The Software Products include, but are not 
-restricted to, the set of programs, methods, rules and documentation related to the operating 
-system and the different components of the Mandrake Linux distribution.
-
-
-1. License Agreement
-
-Please read this document carefully. This document is a license agreement between you and  
-MandrakeSoft S.A. which applies to the Software Products.
-By installing, duplicating or using the Software Products in any manner, you explicitly 
-accept and fully agree to conform to the terms and conditions of this License. 
-If you disagree with any portion of the License, you are not allowed to install, duplicate or use 
-the Software Products. 
-Any attempt to install, duplicate or use the Software Products in a manner which does not comply 
-with the terms and conditions of this License is void and will terminate your rights under this 
-License. Upon termination of the License,  you must immediately destroy all copies of the 
-Software Products.
-
-
-2. Limited Warranty
-
-The Software Products and attached documentation are provided \"as is\", with no warranty, to the 
-extent permitted by law.
-MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,
-incidental, direct or indirect damages whatsoever (including without limitation damages for loss of 
-business, interruption of business, financial loss, legal fees and penalties resulting from a court 
-judgment, or any other consequential loss) arising out of  the use or inability to use the Software 
-Products, even if MandrakeSoft S.A. has been advised of the possibility or occurance of such 
-damages.
-
-LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES
-
-To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be 
-liable for any special, incidental, direct or indirect damages whatsoever (including without 
-limitation damages for loss of business, interruption of business, financial loss, legal fees 
-and penalties resulting from a court judgment, or any other consequential loss) arising out 
-of the possession and use of software components or arising out of  downloading software components 
-from one of Mandrake Linux sites  which are prohibited or restricted in some countries by local laws.
-This limited liability applies to, but is not restricted to, the strong cryptography components 
-included in the Software Products.
-
-
-3. The GPL License and Related Licenses
-
-The Software Products consist of components created by different persons or entities.  Most 
-of these components are governed under the terms and conditions of the GNU General Public 
-Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, 
-duplicate, adapt or redistribute the components which they cover. Please read carefully the terms 
-and conditions of the license agreement for each component before using any component. Any question 
-on a component license should be addressed to the component author and not to MandrakeSoft.
-The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written 
-by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for 
-further details.
-
-
-4. Intellectual Property Rights
-
-All rights to the components of the Software Products belong to their respective authors and are 
-protected by intellectual property and copyright laws applicable to software programs.
-MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in 
-parts, by all means and for all purposes.
-\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of MandrakeSoft S.A.  
-
-
-5. Governing Laws 
-
-If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this 
-portion is excluded from this contract. You remain bound by the other applicable sections of the 
-agreement.
-The terms and conditions of this License are governed by the Laws of France.
-All disputes on the terms of this license will preferably be settled out of court. As a last 
-resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.
-For any question on this document, please contact MandrakeSoft S.A.  
-")), [ __("Accept"), __("Refuse") ], "Refuse") eq "Accept" or $o->exit;
-    }
-}
-}
-
-#------------------------------------------------------------------------------
-sub selectKeyboard {
-    my ($o, $clicked) = @_;
-
-    my $l = keyboard::lang2keyboards(lang::langs($o->{langs}));
-
-    #- good guess, don't ask
-    return install_steps::selectKeyboard($o) 
-      if !$::expert && !$clicked && $l->[0][1] >= 90 && listlength(lang::langs($o->{langs})) == 1;
-
-    my @best = map { $_->[0] } @$l;
-    push @best, 'us_intl' if !member('us_intl', @best);
-
-    my $format = sub { translate(keyboard::keyboard2text($_[0])) };
-    my $other;
-    my $ext_keyboard = $o->{keyboard};
-    $o->ask_from_(
-	{ title => _("Keyboard"), 
-	  messages => _("Please choose your keyboard layout."),
-	  advanced_messages => _("Here is the full list of keyboards available"),
-	  advanced_label => _("More"),
-	  callbacks => { changed => sub { $other = $_[0]==1 } },
-	},
-	  [ if_(@best > 1, { val => \$o->{keyboard}, type => 'list', format => $format, sort => 1,
-	      list => [ @best ] }),
-	    { val => \$ext_keyboard, type => 'list', format => $format,
-	      list => [ difference2([ keyboard::keyboards ], \@best) ], advanced => @best > 1 }
-	  ]);
-    delete $o->{keyboard_unsafe};
-
-    $o->{keyboard} = $ext_keyboard if $other;
-    install_steps::selectKeyboard($o);
-}
-#------------------------------------------------------------------------------
-sub selectInstallClass1 {
-    my ($o, $verif, $l, $def, $l2, $def2) = @_;
-    $verif->($o->ask_from_list(_("Install Class"), _("Which installation class do you want?"), $l, $def) || die 'already displayed');
-
-    $::live ? 'Update' : $o->ask_from_list_(_("Install/Update"), _("Is this an install or an update?"), $l2, $def2);
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass {
-    my ($o, $clicked) = @_;
-
-    my %c = my @c = (
-      if_(!$::corporate,
-	_("Recommended") => "beginner",
-      ),
-      if_($o->{meta_class} ne 'desktop',
-	_("Expert")	 => "expert",
-      ),
-    );
-    %c = @c = (_("Expert") => "expert") if $::expert && !$clicked;
-
-    $o->set_help('selectInstallClassCorpo') if $::corporate;
-
-    my $verifInstallClass = sub { $::expert = $c{$_[0]} eq "expert" };
-    my $installMode = $o->{isUpgrade} ? $o->{keepConfiguration} ? __("Upgrade packages only") : __("Upgrade") : __("Install");
-
-    $installMode = $o->selectInstallClass1($verifInstallClass,
-					   first(list2kv(@c)), ${{reverse %c}}{$::expert ? "expert" : "beginner"},
-					   [ __("Install"), __("Upgrade"), __("Upgrade packages only") ], $installMode);
-
-    $o->{isUpgrade} = $installMode =~ /Upgrade/;
-    $o->{keepConfiguration} = $installMode =~ /packages only/;
-
-    install_steps::selectInstallClass($o);
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
-    my ($o, $force) = @_;
-
-    $force ||= $o->{mouse}{unsafe} || $::expert;
-
-    my $prev = $o->{mouse}{type} . '|' . $o->{mouse}{name};
-    $o->{mouse} = mouse::fullname2mouse(
-	$o->ask_from_treelist_('', _("Please choose the type of your mouse."), 
-			       '|', [ mouse::fullnames ], $prev) || return) if $force;
-
-    if ($force && $o->{mouse}{type} eq 'serial') {
-	$o->set_help('selectSerialPort');
-	$o->{mouse}{device} = 
-	  $o->ask_from_listf(_("Mouse Port"),
-			    _("Please choose on which serial port your mouse is connected to."),
-			    \&mouse::serial_port2text,
-			    [ mouse::serial_ports ]) or return;
-    }
-    if (arch() =~ /ppc/ && $o->{mouse}{nbuttons} == 1) {
-	#- set a sane default F11/F12
-	$o->{mouse}{button2_key} = 87;
-	$o->{mouse}{button3_key} = 88;
-	$o->ask_from('', _("Buttons emulation"),
-		[
-		{ label => _("Button 2 Emulation"), val => \$o->{mouse}{button2_key}, list => [ mouse::ppc_one_button_keys() ], format => \&mouse::ppc_one_button_key2text },
-		{ label => _("Button 3 Emulation"), val => \$o->{mouse}{button3_key}, list => [ mouse::ppc_one_button_keys() ], format => \&mouse::ppc_one_button_key2text },
-		]) or return;
-    }
-    
-    if ($o->{mouse}{device} eq "usbmouse") {
-	any::load_category($o, 'bus/usb', !$::expert, 1, $o->{pcmcia});
-	eval { 
-	    devices::make("usbmouse");
-	    modules::load(qw(hid mousedev usbmouse));
-	};
-    }
-
-    $o->SUPER::selectMouse;
-    1;
-}
-#------------------------------------------------------------------------------
-sub setupSCSI {
-    my ($o, $clicked) = @_;
-
-    if (!$::noauto && arch() =~ /i.86/) {
-	if ($o->{pcmcia} ||= !$::testing && c::pcmcia_probe()) {
-	    my $w = $o->wait_message(_("PCMCIA"), _("Configuring PCMCIA cards..."));
-	    my $results = modules::configure_pcmcia($o->{pcmcia});
-	    $w = undef;
-	    $results and $o->ask_warn('', $results);
-	}
-    }
-    { 
-	my $w = $o->wait_message(_("IDE"), _("Configuring IDE"));
-	modules::load_category('disk/cdrom');
-    }
-    any::load_category($o, 'disk/scsi|hardware_raid', !$::expert && !$clicked, 0, $o->{pcmcia});
-
-    install_interactive::tellAboutProprietaryModules($o) if !$clicked;
-}
-
-sub ask_mntpoint_s {
-    my ($o, $fstab) = @_;
-    $o->set_help('ask_mntpoint_s');
-
-    my @fstab = grep { isTrueFS($_) } @$fstab;
-    @fstab = grep { isSwap($_) } @$fstab if @fstab == 0;
-    @fstab = @$fstab if @fstab == 0;
-    die _("No partition available") if @fstab == 0;
-
-    {
-	my $w = $o->wait_message('', _("Scanning partitions to find mount points"));
-	install_any::suggest_mount_points($fstab, $o->{prefix}, 'uniq');
-	log::l("default mntpoint $_->{mntpoint} $_->{device}") foreach @fstab;
-    }
-    if (@fstab == 1) {
-	$fstab[0]{mntpoint} = '/';
-    } else {
-	$o->ask_from('', 
-				  _("Choose the mount points"),
-				  [ map { { label => partition_table::description($_), 
-					    val => \$_->{mntpoint},
-					    not_edit => 0,
-					    list => [ '', fsedit::suggestions_mntpoint(fsedit::empty_all_hds()) ] }
-					} grep { !$_->{real_mntpoint} || common::usingRamdisk() } @fstab ]) or return;
-    }
-    $o->SUPER::ask_mntpoint_s($fstab);
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
-    my ($o) = @_;
-
-    my $warned;
-    install_any::getHds($o, sub {
-	my ($err) = @_;
-	$warned = 1;
-	if ($o->ask_yesorno(_("Error"), 
-_("I can't read your partition table, it's too corrupted for me :(
-I can try to go on, erasing over bad partitions (ALL DATA will be lost!).
-The other solution is to not allow DrakX to modify the partition table.
-(the error is %s)
-
-Do you agree to loose all the partitions?
-", $err))) {
-            0;
-        } else {
-            $o->{partitioning}{readonly} = 1;
-            1;
-        }
-    }) or $warned or $o->ask_warn('', 
-_("DiskDrake failed to read correctly the partition table.
-Continue at your own risk!"));
-
-    if (arch() =~ /ppc/ && detect_devices::get_mac_generation =~ /NewWorld/) { #- need to make bootstrap part if NewWorld machine - thx Pixel ;^)
-	if (defined $partition_table_mac::bootstrap_part) {
-	    #- don't do anything if we've got the bootstrap setup
-	    #- otherwise, go ahead and create one somewhere in the drive free space
-	} else {
-	    if (defined $partition_table_mac::freepart_start && $partition_table_mac::freepart_size >= 1) {	        
-		my ($hd) = $partition_table_mac::freepart_device;
-		log::l("creating bootstrap partition on drive /dev/$hd->{device}, block $partition_table_mac::freepart_start");
-		$partition_table_mac::bootstrap_part = $partition_table_mac::freepart_part;	
-		log::l("bootstrap now at $partition_table_mac::bootstrap_part");
-		fsedit::add($hd, { start => $partition_table_mac::freepart_start, size => 1 << 11, type => 0x401, mntpoint => '' }, $o->{all_hds}, { force => 1, primaryOrExtended => 'Primary' });
-		$new_bootstrap = 1;    
-	    } else {
-		$o->ask_warn('',_("No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"));
-	    }
-	}
-    }
-
-    if ($o->{isUpgrade}) {
-	# either one root is defined (and all is ok), or we take the first one we find
-	my $p = fsedit::get_root_($o->{fstab});
-        if (!$p) {
-            my @l = install_any::find_root_parts($o->{fstab}, $o->{prefix}) or die _("No root partition found to perform an upgrade");
-	    $p = $o->ask_from_listf(_("Root Partition"),
-			            _("What is the root partition (/) of your system?"),
-			            \&partition_table::description, \@l) or die "setstep exitInstall\n";
-        }
-	install_any::use_root_part($o->{all_hds}, $p, $o->{prefix});
-    } elsif ($::expert && $o->isa('interactive_gtk')) {
-        install_interactive::partition_with_diskdrake($o, $o->{all_hds});
-    } else {
-        install_interactive::partitionWizard($o);
-    }
-}
-
-#------------------------------------------------------------------------------
-sub rebootNeeded {
-    my ($o) = @_;
-    $o->ask_warn('', _("You need to reboot for the partition table modifications to take place"));
-
-    install_steps::rebootNeeded($o);
-}
-
-#------------------------------------------------------------------------------
-sub choosePartitionsToFormat {
-    my ($o, $fstab) = @_;
-
-    $o->SUPER::choosePartitionsToFormat($fstab);
-
-    my @l = grep { !$_->{isMounted} && $_->{mntpoint} && 
-		   (!isSwap($_) || $::expert) &&
-		   (!isFat($_) || $_->{notFormatted} || $::expert) &&
-		   (!isOtherAvailableFS($_) || $::expert || $_->{toFormat})
-	       } @$fstab;
-    $_->{toFormat} = 1 foreach grep { isSwap($_) && !$::expert } @$fstab;
-
-    return if @l == 0 || !$::expert && 0 == grep { ! $_->{toFormat} } @l;
-
-    #- keep it temporary until the guy has accepted
-    $_->{toFormatTmp} = $_->{toFormat} || $_->{toFormatUnsure} foreach @l;
-
-    $o->ask_from_(
-        { messages => _("Choose the partitions you want to format"),
-          advanced_messages => _("Check bad blocks?"),
-        },
-        [ map { 
-	    my $e = $_;
-	    ({
-	      text => partition_table::description($e), type => 'bool',
-	      val => \$e->{toFormatTmp}
-	     }, if_(!isLoopback($_) && !isThisFs("reiserfs", $_) && !isThisFs("xfs", $_) && !isThisFs("jfs", $_), {
-	      text => partition_table::description($e), type => 'bool', advanced => 1, 
-	      disabled => sub { !$e->{toFormatTmp} },
-	      val => \$e->{toFormatCheck}
-        })) } @l ]
-    ) or die 'already displayed';
-    #- ok now we can really set toFormat
-    foreach (@l) {
-	$_->{toFormat} = delete $_->{toFormatTmp};
-	$_->{isFormatted} = 0;
-    }
-}
-
-
-sub formatMountPartitions {
-    my ($o, $fstab) = @_;
-    my $w;
-    fs::formatMount_all($o->{all_hds}{raids}, $o->{fstab}, $o->{prefix}, sub {
-	my ($part) = @_;
-	$w ||= $o->wait_message('', _("Formatting partitions"));
-	$w->set(isLoopback($part) ?
-		_("Creating and formatting file %s", $part->{loopback_file}) :
-		_("Formatting partition %s", $part->{device}));
-    });
-    die _("Not enough swap space to fulfill installation, please add some") if availableMemory < 40 * 1024;
-}
-
-#------------------------------------------------------------------------------
-sub setPackages {
-    my ($o) = @_;
-    my $w = $o->wait_message('', _("Looking for available packages..."));
-    $o->SUPER::setPackages;
-}
-#------------------------------------------------------------------------------
-sub selectPackagesToUpgrade {
-    my ($o) = @_;
-    my $w = $o->wait_message('', _("Finding packages to upgrade..."));
-    $o->SUPER::selectPackagesToUpgrade();
-}
-#------------------------------------------------------------------------------
-sub choosePackages {
-    my ($o, $packages, $compssUsers, $first_time) = @_;
-
-    #- this is done at the very beginning to take into account
-    #- selection of CD by user if using a cdrom.
-    $o->chooseCD($packages) if $o->{method} eq 'cdrom' && !$::oem;
-
-    my $availableC = install_steps::choosePackages(@_);
-    my $individual = $::expert;
-
-    require pkgs;
-
-    my $min_size = pkgs::selectedSize($packages);
-    $min_size < $availableC or die _("Your system does not have enough space left for installation or upgrade (%d > %d)", $min_size, $availableC);
-
-    my $min_mark = $::expert ? 3 : 4;
-    my $def_mark = 4; #-TODO: was 59, 59 is for packages that need gl hw acceleration.
-
-    my $b = pkgs::saveSelected($packages);
-    pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $def_mark, 0);
-    my $def_size = pkgs::selectedSize($packages) + 1; #- avoid division by zero.
-    my $level = pkgs::setSelectedFromCompssList($packages, { map { $_ => 1 } map { @{$compssUsers->{$_}{flags}} } @{$o->{compssUsersSorted}} }, $min_mark, 0);
-    my $max_size = pkgs::selectedSize($packages) + 1; #- avoid division by zero.
-    pkgs::restoreSelected($b);
-
-    $o->chooseGroups($packages, $compssUsers, $min_mark, \$individual, $max_size) if !$::corporate;
-
-    ($o->{packages_}{ind}) =
-      pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $min_mark, $availableC);
-
-    $o->choosePackagesTree($packages) if $individual;
-
-    install_any::warnAboutNaughtyServers($o);
-}
-
-sub chooseSizeToInstall {
-    my ($o, $packages, $min, $def, $max, $availableC) = @_;
-    min($def, $availableC * 0.7);
-}
-sub choosePackagesTree {
-    my ($o, $packages, $limit_to_medium) = @_;
-
-    $o->ask_many_from_list('', _("Choose the packages you want to install"),
-			   {
-			    list => [ grep { !$limit_to_medium || pkgs::packageMedium($packages, $_) == $limit_to_medium }
-				      map { pkgs::packageByName($packages, $_) }
-				      keys %{$packages->{names}} ],
-			    value => \&pkgs::packageFlagSelected,
-			    label => \&pkgs::packageName,
-			    sort => 1,
-			   });
-}
-sub loadSavePackagesOnFloppy {
-    my ($o, $packages) = @_;
-    my $choice = $o->ask_from_listf('', 
-_("Please choose load or save package selection on floppy.
-The format is the same as auto_install generated floppies."),
-				    sub { $_[0]{text} },
-				    [ { text => _("Load from floppy"), code => sub {
-					    while (1) {
-						my $w = $o->wait_message(_("Package selection"), _("Loading from floppy"));
-						log::l("load package selection from floppy");
-						my $O = eval { install_any::loadO({}, 'floppy') };
-						if ($@) {
-						    $w = undef; #- close wait message.
-						    $o->ask_okcancel('', _("Insert a floppy containing package selection"))
-						      or return;
-						} else {
-						    install_any::unselectMostPackages($o);
-						    foreach (@{$O->{default_packages} || []}) {
-							my $pkg = pkgs::packageByName($packages, $_);
-							pkgs::selectPackage($packages, $pkg) if $pkg;
-						    }
-						    return 1;
-						}
-					    }
-					} },
-				      { text => _("Save on floppy"), code => sub {
-					    log::l("save package selection to floppy");
-					    install_any::g_default_packages($o, 'quiet');
-					} },
-				      { text => _("Cancel") },
-				    ]);
-    $choice->{code} and $choice->{code}();
-}
-sub chooseGroups {
-    my ($o, $packages, $compssUsers, $min_level, $individual, $max_size) = @_;
-
-    my $b = pkgs::saveSelected($packages);
-    install_any::unselectMostPackages($o);
-    pkgs::setSelectedFromCompssList($packages, {}, $min_level, $max_size);
-    my $system_size = pkgs::selectedSize($packages);
-    my ($sizes, $pkgs) = pkgs::computeGroupSize($packages, $min_level);
-    pkgs::restoreSelected($b);
-    log::l("system_size: $system_size");
-
-    my @groups = @{$o->{compssUsersSorted}};
-    my %stable_flags = grep_each { $::b } %{$o->{compssUsersChoice}};
-    delete $stable_flags{$_} foreach map { @{$compssUsers->{$_}{flags}} } @groups;
-
-    my $compute_size = sub {
-	my %pkgs;
-	my %flags = %stable_flags; @flags{@_} = ();
-	my $total_size;
-	A: while (my ($k, $size) = each %$sizes) {
-	    Or: foreach (split "\t", $k) {
-		  foreach (split "&&") {
-		      exists $flags{$_} or next Or;
-		  }
-		  $total_size += $size;
-		  $pkgs{$_} = 1 foreach @{$pkgs->{$k}};
-		  next A;
-	      }
-	  }
-	log::l("computed size $total_size");
-	log::l("chooseGroups: ", join(" ", sort keys %pkgs));
-
-	int $total_size;
-    };
-    my %val = map {
-	$_ => ! grep { ! $o->{compssUsersChoice}{$_} } @{$compssUsers->{$_}{flags}}
-    } @groups;
-
-#    @groups = grep { $size{$_} = round_down($size{$_} / sqr(1024), 10) } @groups; #- don't display the empty or small one (eg: because all packages are below $min_level)
-    my ($all, $size);
-    my $available_size = install_any::getAvailableSpace($o) / sqr(1024);
-    my $size_to_display = sub { 
-	my $lsize = $system_size + $compute_size->(map { @{$compssUsers->{$_}{flags}} } grep { $val{$_} } @groups);
-
-	#- if a profile is deselected, deselect everything (easier than deselecting the profile packages)
-	$size > $lsize and install_any::unselectMostPackages($o);
-	$size = $lsize;
-	_("Total size: %d / %d MB", pkgs::correctSize($size / sqr(1024)), $available_size);
-    };
-
-    while (1) {
-	if ($available_size < 140) {
-	    # too small to choose anything. Defaulting to no group chosen
-	    $val{$_} = 0 foreach %val;
-	    last;
-	}
-
-	$o->reallyChooseGroups($size_to_display, $individual, \%val) or return;
-	last if pkgs::correctSize($size / sqr(1024)) < $available_size;
-       
-	$o->ask_warn('', _("Selected size is larger than available space"));	
-    }
-
-    $o->{compssUsersChoice}{$_} = 0 foreach map { @{$compssUsers->{$_}{flags}} } grep { !$val{$_} } keys %val;
-    $o->{compssUsersChoice}{$_} = 1 foreach map { @{$compssUsers->{$_}{flags}} } grep {  $val{$_} } keys %val;
-
-    log::l("compssUsersChoice: " . (!$val{$_} && "not ") . "selected [$_] as [$o->{compssUsers}{$_}{label}]") foreach keys %val;
-
-    #- if no group have been chosen, ask for using base system only, or no X, or normal.
-    unless ($o->{isUpgrade} || grep { $val{$_} } keys %val) {
-	my $docs = !$o->{excludedocs};	
-	my $minimal = !grep { $_ } values %{$o->{compssUsersChoice}};
-
-	$o->ask_from(_("Type of install"), 
-		     _("You haven't selected any group of packages.
-Please choose the minimal installation you want:"),
-		     [
-		      { val => \$o->{compssUsersChoice}{X}, type => 'bool', text => _("With X"), disabled => sub { $minimal } },
-		        if_($::expert || $minimal,
-		      { val => \$docs, type => 'bool', text => _("With basic documentation (recommended!)"), disabled => sub { $minimal } },
-		      { val => \$minimal, type => 'bool', text => _("Truly minimal install (especially no urpmi)") },
-			),
-		     ],
-		     changed => sub { $o->{compssUsersChoice}{X} = $docs = 0 if $minimal },
-	) or return &chooseGroups;
-
-	$o->{excludedocs} = !$docs || $minimal;
-
-	#- reselect according to user selection.
-	if ($minimal) {
-	    $o->{compssUsersChoice}{$_} = 0 foreach keys %{$o->{compssUsersChoice}};
-	} else {
-	    my $X = $o->{compssUsersChoice}{X}; #- don't let setDefaultPackages modify this one
-	    install_any::setDefaultPackages($o, 'clean');
-	    $o->{compssUsersChoice}{X} = $X;
-	}
-	install_any::unselectMostPackages($o);
-    }
-    1;
-}
-
-sub reallyChooseGroups {
-    my ($o, $size_to_display, $individual, $val) = @_;
-
-    my $size_text = &$size_to_display;
-
-    my ($path, $all);
-    $o->ask_from('', _("Package Group Selection"), [
-        { val => \$size_text, type => 'label' }, {},
-	 (map {; 
-	       my $old = $path;
-	       $path = $o->{compssUsers}{$_}{path};
-	       if_($old ne $path, { val => translate($path) }),
-		 {
-		  val => \$val->{$_},
-		  type => 'bool',
-		  disabled => sub { $all },
-		  text => translate($o->{compssUsers}{$_}{label}),
-		  help => translate($o->{compssUsers}{$_}{descr}),
-		 }
-	   } @{$o->{compssUsersSorted}}),
-	 if_($o->{meta_class} eq 'desktop', { text => _("All"), val => \$all, type => 'bool' }),
-	 if_($individual, { text => _("Individual package selection"), val => $individual, advanced => 1, type => 'bool' }),
-    ], changed => sub { $size_text = &$size_to_display }) or return;
-
-    if ($all) {
-	$val->{$_} = 1 foreach keys %$val;
-    }
-    1;    
-}
-
-sub chooseCD {
-    my ($o, $packages) = @_;
-    my @mediums = grep { $_ != $install_any::boot_medium } pkgs::allMediums($packages);
-    my @mediumsDescr = ();
-    my %mediumsDescr = ();
-
-    if (!common::usingRamdisk()) {
-	#- mono-cd in case of no ramdisk
-	foreach (@mediums) {
-	    pkgs::mediumDescr($packages, $install_any::boot_medium) eq pkgs::mediumDescr($packages, $_) and next;
-	    undef $packages->{mediums}{$_}{selected};
-	}
-	log::l("low memory install, using single CD installation (as it is not ejectable)");
-	return;
-    }
-
-    #- the boot medium is already selected.
-    $mediumsDescr{pkgs::mediumDescr($packages, $install_any::boot_medium)} = 1;
-
-    #- build mediumDescr according to mediums, this avoid asking multiple times
-    #- all the medium grouped together on only one CD.
-    foreach (@mediums) {
-	my $descr = pkgs::mediumDescr($packages, $_);
-	exists $mediumsDescr{$descr} or push @mediumsDescr, $descr;
-	$mediumsDescr{$descr} ||= $packages->{mediums}{$_}{selected};
-    }
-
-    #- if no other medium available or a poor beginner, we are choosing for him!
-    #- note first CD is always selected and should not be unselected!
-    return if @mediumsDescr == () || !$::expert;
-
-    $o->set_help('chooseCD');
-    $o->ask_many_from_list('',
-_("If you have all the CDs in the list below, click Ok.
-If you have none of those CDs, click Cancel.
-If only some CDs are missing, unselect them, then click Ok."),
-			   {
-			    list => \@mediumsDescr,
-			    label => sub { _("Cd-Rom labeled \"%s\"", $_[0]) },
-			    val => sub { \$mediumsDescr{$_[0]} },
-			   }) or do {
-			       $mediumsDescr{$_} = 0 foreach @mediumsDescr; #- force unselection of other CDs.
-			   };
-    $o->set_help('choosePackages');
-
-    #- restore true selection of medium (which may have been grouped together)
-    foreach (@mediums) {
-	my $descr = pkgs::mediumDescr($packages, $_);
-	$packages->{mediums}{$_}{selected} = $mediumsDescr{$descr};
-	log::l("select status of medium $_ is $packages->{mediums}{$_}{selected}");
-    }
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
-    my ($o, $packages) = @_;
-    my ($current, $total) = 0;
-
-    my $w = $o->wait_message(_("Installing"), _("Preparing installation"));
-
-    my $old = \&pkgs::installCallback;
-    local *pkgs::installCallback = sub {
-	my $m = shift;
-	if ($m =~ /^Starting installation/) {
-	    $total = $_[1];
-	} elsif ($m =~ /^Starting installing package/) {
-	    my $name = $_[0];
-	    $w->set(_("Installing package %s\n%d%%", $name, $total && 100 * $current / $total));
-	    $current += pkgs::packageSize(pkgs::packageByName($o->{packages}, $name));
-	} else { unshift @_, $m; goto $old }
-    };
-
-    #- the modification is not local as the box should be living for other package installation.
-    #- BEWARE this is somewhat duplicated (but not exactly from gtk code).
-    undef *install_any::changeMedium;
-    *install_any::changeMedium = sub {
-	my ($method, $medium) = @_;
-
-	#- if not using a cdrom medium, always abort.
-	$method eq 'cdrom' && !$::oem and do {
-	    my $name = pkgs::mediumDescr($o->{packages}, $medium);
-	    local $| = 1; print "\a";
-	    my $r = $name !~ /commercial/i || ($o->{useless_thing_accepted2} ||= $o->ask_from_list_('', formatAlaTeX($com_license), [ __("Accept"), __("Refuse") ], "Accept") eq "Accept");
-            $r &&= $o->ask_okcancel('', _("Change your Cd-Rom!
-
-Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.
-If you don't have it, press Cancel to avoid installation from this Cd-Rom.", $name), 1);
-            return $r;
-	};
-    };
-    my $install_result;
-    catch_cdie { $install_result = $o->install_steps::installPackages($packages); }
-      sub {
-	  if ($@ =~ /^error ordering package list: (.*)/) {
-	      $o->ask_yesorno('', [
-_("There was an error ordering packages:"), $1, _("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  } elsif ($@ =~ /^error installing package list: (.*)/) {
-	      $o->ask_yesorno('', [
-_("There was an error installing packages:"), $1, _("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  }
-	  0;
-      };
-    if ($pkgs::cancel_install) {
-	$pkgs::cancel_install = 0;
-	die "setstep choosePackages\n";
-    }
-    $install_result;
-}
-
-sub afterInstallPackages($) {
-    my ($o) = @_;
-    my $w = $o->wait_message('', _("Post-install configuration"));
-    $o->SUPER::afterInstallPackages($o);
-}
-
-sub copyKernelFromFloppy {
-    my ($o) = @_;
-    $o->ask_okcancel('', _("Please insert the Boot floppy used in drive %s", $o->{blank}), 1) or return;
-    $o->SUPER::copyKernelFromFloppy();
-}
-
-sub updateModulesFromFloppy {
-    my ($o) = @_;
-    $o->ask_okcancel('', _("Please insert the Update Modules floppy in drive %s", $o->{updatemodules}), 1) or return;
-    $o->SUPER::updateModulesFromFloppy();
-}
-
-#------------------------------------------------------------------------------
-sub configureNetwork {
-    my ($o, $first_time, $noauto) = @_;
-    require network::netconnect;
-    network::netconnect::main($o->{prefix}, $o->{netcnx} ||= {}, $o->{netc}, $o->{mouse}, $o, $o->{intf},
-			      $first_time, $o->{lang} eq "fr_FR" && $o->{keyboard} eq "fr", $noauto);
-}
-
-#-configureNetworkIntf moved to network
-
-#-configureNetworkNet moved to network
-#------------------------------------------------------------------------------
-#-pppConfig moved to any.pm
-#------------------------------------------------------------------------------
-sub installCrypto {
-    my $license =
-_("You now have the opportunity to download encryption software.
-
-WARNING:
-
-Due to different general requirements applicable to these software and imposed
-by various jurisdictions, customer and/or end user of theses software should
-ensure that the laws of his/their jurisdiction allow him/them to download, stock
-and/or use these software.
-
-In addition customer and/or end user shall particularly be aware to not infringe
-the laws of his/their jurisdiction. Should customer and/or end user not
-respect the provision of these applicable laws, he/they will incure serious
-sanctions.
-
-In no event shall Mandrakesoft nor its manufacturers and/or suppliers be liable
-for special, indirect or incidental damages whatsoever (including, but not
-limited to loss of profits, business interruption, loss of commercial data and
-other pecuniary losses, and eventual liabilities and indemnification to be paid
-pursuant to a court decision) arising out of use, possession, or the sole
-downloading of these software, to which customer and/or end user could
-eventually have access after having sign up the present agreement.
-
-
-For any queries relating to these agreement, please contact 
-Mandrakesoft, Inc.
-2400 N. Lincoln Avenue Suite 243
-Altadena California 91001
-USA");
-    goto &installUpdates; #- remove old code, keep this one ok though by transfering to installUpdates.
-}
-
-sub installUpdates {
-    my ($o) = @_;
-    my $u = $o->{updates} ||= {};
-    
-    $o->hasNetwork or return;
-
-    is_empty_hash_ref($u) and $o->ask_yesorno('', 
-formatAlaTeX(
-_("You now have the opportunity to download updated packages. These packages
-have been released after the distribution was released. They may
-contain security or bug fixes.
-
-To download these packages, you will need to have a working Internet 
-connection.
-
-Do you want to install the updates ?"))) || return;
-
-    #- bring all interface up for installing crypto packages.
-    install_interactive::upNetwork($o);
-
-    require crypto;
-    eval {
-	my @mirrors = do { my $w = $o->wait_message('',
-						    _("Contacting Mandrake Linux web site to get the list of available mirrors..."));
-			   crypto::mirrors() };
-	#- if no mirror have been found, use current time zone and propose among available.
-	$u->{mirror} ||= crypto::bestMirror($o->{timezone}{timezone});
-	$u->{mirror} = $o->ask_from_treelistf('', 
-					      _("Choose a mirror from which to get the packages"), 
-					      '|',
-					      \&crypto::mirror2text,
-					      \@mirrors,
-					      $u->{mirror});
-    };
-    return if $@ || !$u->{mirror};
-
-    my $update_medium = do {
-	my $w = $o->wait_message('', _("Contacting the mirror to get the list of available packages..."));
-	crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror});
-    };
-
-    if ($update_medium) {
-	if ($o->choosePackagesTree($o->{packages}, $update_medium)) {
-	    $o->pkg_install;
-	} else {
-	    #- make sure to not try to install the packages (which are automatically selected by getPackage above).
-	    #- this is possible by deselecting the medium (which can be re-selected above).
-	    delete $update_medium->{selected};
-	}
-	#- update urpmi even, because there is an hdlist available and everything is good,
-	#- this will allow user to update the medium but update his machine later.
-	$o->install_urpmi;
-    }
- 
-    #- stop interface using ppp only. FIXME REALLY TOCHECK isdn (costly network) ?
-    # FIXME damien install_interactive::downNetwork($o, 'pppOnly');
-}
-
-
-#------------------------------------------------------------------------------
-sub configureTimezone {
-    my ($o, $clicked) = @_;
-
-    require timezone;
-    $o->{timezone}{timezone} = $o->ask_from_treelist('', _("Which is your timezone?"), '/', [ timezone::getTimeZones($::g_auto_install ? '' : $o->{prefix}) ], $o->{timezone}{timezone}) || return;
-    $o->set_help('configureTimezoneGMT');
-
-    my $ntp = to_bool($o->{timezone}{ntp});
-    $o->ask_from('', '', [
-	  { text => _("Hardware clock set to GMT"), val => \$o->{timezone}{UTC}, type => 'bool' },
-	  { text => _("Automatic time synchronization (using NTP)"), val => \$ntp, type => 'bool' },
-    ]) or goto &configureTimezone
-	    if $::expert || $clicked;
-    if ($ntp) {
-	my @servers = split("\n", $timezone::ntp_servers);
-
-	$o->ask_from('', '',
-	    [ { label => _("NTP Server"), val => \$o->{timezone}{ntp}, list => \@servers, not_edit => 0 } ]
-        ) or goto &configureTimezone;
-	$o->{timezone}{ntp} =~ s/.*\((.+)\)/$1/;
-    } else {
-	$o->{timezone}{ntp} = '';
-    }
-    install_steps::configureTimezone($o);
-}
-
-#------------------------------------------------------------------------------
-sub configureServices { 
-    my ($o, $clicked) = @_;
-    require services;
-    $o->{services} = services::ask($o, $o->{prefix}) if $::expert || $clicked;
-    install_steps::configureServices($o);
-}
-
-sub summary {
-    my ($o, $first_time) = @_;
-    require pkgs;
-
-    if ($first_time) {
-	#- auto-detection
-	$o->configurePrinter(0) if !$::expert;
-	install_any::preConfigureTimezone($o);
-    }
-    my $mouse_name;
-    my $format_mouse = sub { $mouse_name = translate($o->{mouse}{type}) . ' ' . translate($o->{mouse}{name}) };
-    &$format_mouse;
-
-    #- format printer description in a better way
-    my $format_printers = sub {
-	my $printer = $o->{printer};
-	if (is_empty_hash_ref($printer->{configured})) {
-	    pkgs::packageFlagInstalled(pkgs::packageByName($o->{packages}, 'cups')) and return _("Remote CUPS server");
-	    return _("No printer");
-	}
-	my $entry;
-	foreach ($printer->{currentqueue},
-		 map { $_->{queuedata} } ($printer->{configured}{$printer->{DEFAULT}}, values %{$printer->{configured}})) {
-	    $_ && ($_->{make} || $_->{model}) and return "$_->{make} $_->{model}";
-	}
-	return _("Remote CUPS server"); #- fall back in case of something wrong.
-    };
-
-    my @sound_cards = (arch() =~ /ppc/ ? \&modules::load_category : \&modules::probe_category)->('multimedia/sound');
-
-    #- if no sound card are detected AND the user selected things needing a sound card,
-    #- propose a special case for ISA cards
-    my $isa_sound_card = 
-      !@sound_cards && ($o->{compssUsersChoice}{GAMES} || $o->{compssUsersChoice}{AUDIO}) &&
-	sub {
-	    if ($o->ask_yesorno('', _("Do you have an ISA sound card?"))) {
-		$o->do_pkgs->install('sndconfig');
-		$o->ask_warn('', _("Run \"sndconfig\" after installation to configure your sound card"));
-	    } else {
-		$o->ask_warn('', _("No sound card detected. Try \"harddrake\" after installation"));
-	    }
-	};
-
-    $o->ask_from_({
-		   messages => _("Summary"),
-		   cancel   => '',
-		  }, [
-{ label => _("Mouse"), val => \$mouse_name, clicked => sub { $o->selectMouse(1); mouse::write($o->{prefix}, $o->{mouse}); &$format_mouse } },
-{ label => _("Keyboard"), val => \$o->{keyboard}, clicked => sub { $o->selectKeyboard(1) }, format => sub { translate(keyboard::keyboard2text($_[0])) } },
-{ label => _("Timezone"), val => \$o->{timezone}{timezone}, clicked => sub { $o->configureTimezone(1) } },
-{ label => _("Printer"), val => \$o->{printer}, clicked => sub { $o->configurePrinter(1) }, format => $format_printers },
-    (map {
-{ label => _("ISDN card"), val => $_->{description}, clicked => sub { $o->configureNetwork } }
-     } grep { $_->{driver} eq 'hisax' } detect_devices::probeall()),
-    (map { 
-{ label => _("Sound card"), val => $_->{description} } 
-     } @sound_cards),
-    if_($isa_sound_card, { label => _("Sound card"), clicked => $isa_sound_card }), 
-    (map {
-{ label => _("TV card"), val => $_->{description}, clicked => sub { require harddrake::bttv; harddrake::bttv::config($o) }} 
-     } grep { $_->{driver} eq 'bttv' } detect_devices::probeall()),
-]);
-    install_steps::configureTimezone($o);  #- do not forget it.
-}
-
-#------------------------------------------------------------------------------
-sub configurePrinter {
-    my ($o, $clicked) = @_;
-    $::corporate && !$clicked and return;
-
-    require printer;
-    require printerdrake;
-
-    #- try to determine if a question should be asked to the user or
-    #- if he is autorized to configure multiple queues.
-    my $ask_multiple_printer = ($::expert || $clicked) && 2 || scalar(printerdrake::auto_detect($o));
-    $ask_multiple_printer-- or return;
-
-    #- install packages needed for printer::getinfo()
-    $::testing or $o->do_pkgs->install('foomatic');
-
-    #- take default configuration, this include choosing the right system
-    #- currently used by the system.
-    my $printer = $o->{printer} ||= {};
-    eval { add2hash($printer, printer::getinfo($o->{prefix})) };
-
-    $printer->{PAPERSIZE} = (($o->{lang} =~ /^en_US/) || 
-                             ($o->{lang} =~ /^en_CA/) || 
-                             ($o->{lang} =~ /^fr_CA/)) ? 'Letter' : 'A4';
-    printerdrake::main($printer, $o, $ask_multiple_printer, sub { install_interactive::upNetwork($o, 'pppAvoided') });
-
-}
-
-#------------------------------------------------------------------------------
-sub setRootPassword {
-    my ($o, $clicked) = @_;
-    my $sup = $o->{superuser} ||= {};
-    my $auth = ($o->{authentication}{LDAP} && __("LDAP") ||
-		$o->{authentication}{NIS} && __("NIS") ||
-		__("Local files"));
-    $sup->{password2} ||= $sup->{password} ||= "";
-
-    return if $o->{security} < 1 && !$clicked;
-
-    $::isInstall and $o->set_help("setRootPassword", if_($::expert, "setRootPasswordAuth"));
-
-    $o->ask_from_(
-        {
-	 title => _("Set root password"), 
-	 messages => _("Set root password"),
-	 cancel => ($o->{security} <= 2 && !$::corporate ? _("No password") : ''),
-	 callbacks => { 
-	     complete => sub {
-		 $sup->{password} eq $sup->{password2} or $o->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return (1,0);
-		 length $sup->{password} < 2 * $o->{security}
-		   and $o->ask_warn('', _("This password is too short (it must be at least %d characters long)", 2 * $o->{security})), return (1,0);
-		 return 0
-        } } }, [
-{ label => _("Password"), val => \$sup->{password},  hidden => 1 },
-{ label => _("Password (again)"), val => \$sup->{password2}, hidden => 1 },
-  if_($::expert,
-{ label => _("Authentication"), val => \$auth, list => [ __("Local files"), __("LDAP"), __("NIS") ], format => \&translate },
-  ),
-			 ]) or return;
-
-    if ($auth eq __("LDAP")) {
-	$o->{authentication}{LDAP} ||= "localhost"; #- any better solution ?
-	$o->{netc}{LDAPDOMAIN} ||= join (',', map { "dc=$_" } split /\./, $o->{netc}{DOMAINNAME});
-	$o->ask_from('',
-		     _("Authentication LDAP"),
-		     [ { label => _("LDAP Base dn"), val => \$o->{netc}{LDAPDOMAIN} },
-		       { label => _("LDAP Server"), val => \$o->{authentication}{LDAP} },
-		     ]) or goto &setRootPassword;
-    } else { $o->{authentication}{LDAP} = '' }
-    if ($auth eq __("NIS")) { 
-	$o->{authentication}{NIS} ||= 'broadcast';
-	$o->ask_from('',
-		     _("Authentication NIS"),
-		     [ { label => _("NIS Domain"), val => \ ($o->{netc}{NISDOMAIN} ||= $o->{netc}{DOMAINNAME}) },
-		       { label => _("NIS Server"), val => \$o->{authentication}{NIS}, list => ["broadcast"], not_edit => 0 },
-		     ]) or goto &setRootPassword;
-    } else { $o->{authentication}{NIS} = '' }
-    install_steps::setRootPassword($o);
-}
-
-#------------------------------------------------------------------------------
-#-addUser
-#------------------------------------------------------------------------------
-sub addUser {
-    my ($o, $clicked) = @_;
-    $o->{users} ||= [];
-
-    if ($o->{security} < 1) {
-	push @{$o->{users}}, { password => 'mandrake', realname => 'default', icon => 'automagic' } 
-	  if !member('mandrake', map { $_->{name} } @{$o->{users}});
-    }
-    if (($o->{security} >= 1 || $clicked)) {
-	any::ask_users($o->{prefix}, $o, $o->{users}, $o->{security});
-    }
-    any::get_autologin($o->{prefix}, $o);
-    any::autologin($o->{prefix}, $o, $o);
-
-    install_steps::addUser($o);
-}
-
-#------------------------------------------------------------------------------
-sub createBootdisk {
-    my ($o, $first_time, $noauto) = @_;
-
-    return if !$noauto && $first_time && !$::expert;
-
-    if (arch() =~ /sparc/) {
-	#- as probing floppies is a bit more different on sparc, assume always /dev/fd0.
-	$o->ask_okcancel('',
-			 _("A custom bootdisk provides a way of booting into your Linux system without
-depending on the normal bootloader. This is useful if you don't want to install
-SILO on your system, or another operating system removes SILO, or SILO doesn't
-work with your hardware configuration. A custom bootdisk can also be used with
-the Mandrake rescue image, making it much easier to recover from severe system
-failures.
-
-If you want to create a bootdisk for your system, insert a floppy in the first
-drive and press \"Ok\"."),
-			 $o->{mkbootdisk}) or return $o->{mkbootdisk} = '';
-	my @l = detect_devices::floppies_dev();
-	$o->{mkbootdisk} = $l[0] if !$o->{mkbootdisk} || $o->{mkbootdisk} eq "1";
-	$o->{mkbootdisk} or return;
-    } else {
-	my @l = detect_devices::floppies_dev();
-	my %l = (
-		 'fd0'  => _("First floppy drive"),
-		 'fd1'  => _("Second floppy drive"),
-		 'Skip' => _("Skip"),
-		 );
-
-	if ($first_time || @l == 1) {
-	    $o->ask_yesorno('', formatAlaTeX(
-			    _("A custom bootdisk provides a way of booting into your Linux system without
-depending on the normal bootloader. This is useful if you don't want to install
-LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't
-work with your hardware configuration. A custom bootdisk can also be used with
-the Mandrake rescue image, making it much easier to recover from severe system
-failures. Would you like to create a bootdisk for your system?
-%s", isThisFs('xfs', fsedit::get_root($o->{fstab})) ? _("
-
-(WARNING! You're using XFS for your root partition,
-creating a bootdisk on a 1.44 Mb floppy will probably fail,
-because XFS needs a very large driver).") : '')), 
-			    $o->{mkbootdisk}) or return $o->{mkbootdisk} = '';
-	    $o->{mkbootdisk} = $l[0] if !$o->{mkbootdisk} || $o->{mkbootdisk} eq "1";
-	} else {
-	    @l or die _("Sorry, no floppy drive available");
-
-	    $o->ask_from_(
-              {
-	       messages => _("Choose the floppy drive you want to use to make the bootdisk"),
-	      }, [ { val => \$o->{mkbootdisk}, list => \@l, format => sub { $l{$_[0]} || $_[0] } } ]
-            ) or return;
-        }
-        $o->ask_warn('', _("Insert a floppy in %s", $l{$o->{mkbootdisk}} || $o->{mkbootdisk}));
-    }
-
-    my $w = $o->wait_message('', _("Creating bootdisk..."));
-    install_steps::createBootdisk($o);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloaderBefore {
-    my ($o) = @_;
-    my $w = $o->wait_message('', _("Preparing bootloader..."));
-    $o->set_help('empty');
-    $o->SUPER::setupBootloaderBefore($o);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloader {
-    my ($o, $more) = @_;
-    if (arch() =~ /ppc/) {
-	my $machtype = detect_devices::get_mac_generation();
-	if ($machtype !~ /NewWorld/) {
-	    $o->ask_warn('', _("You appear to have an OldWorld or Unknown\n machine, the yaboot bootloader will not work for you.\nThe install will continue, but you'll\n need to use BootX to boot your machine"));
-	    log::l("OldWorld or Unknown Machine - no yaboot setup");
-	    return;
-	}
-    }
-    if (arch() =~ /^alpha/) {
-	$o->ask_yesorno('', _("Do you want to use aboot?"), 1) or return;
-	catch_cdie { $o->SUPER::setupBootloader } sub {
-	    $o->ask_yesorno('', 
-_("Error installing aboot, 
-try to force installation even if that destroys the first partition?"));
-	};
-    } else {
-	any::setupBootloader($o, $o->{bootloader}, $o->{all_hds}, $o->{fstab}, $o->{security}, $o->{prefix}, $more) or return;
-
-	{
-	    my $w = $o->wait_message('', _("Installing bootloader"));
-	    eval { $o->SUPER::setupBootloader };
-	}
-	if (my $err = $@) {
-	    $err =~ /failed$/ or die;
-	    $o->ask_warn('', 
-			 [ _("Installation of bootloader failed. The following error occured:"),
-			   grep { !/^Warning:/ } cat_("$o->{prefix}/tmp/.error") ]);
-	    unlink "$o->{prefix}/tmp/.error";
-	    die "already displayed";
-	} elsif (arch() =~ /ppc/) {
-	    my $of_boot = cat_("$o->{prefix}/tmp/of_boot_dev") || die "Can't open $o->{prefix}/tmp/of_boot_dev";
-	    chop($of_boot);
-	    unlink "$o->{prefix}/tmp/.error";
-	    $o->ask_warn('', _("You may need to change your Open Firmware boot-device to\n enable the bootloader.  If you don't see the bootloader prompt at\n reboot, hold down Command-Option-O-F at reboot and enter:\n setenv boot-device %s,\\\\:tbxi\n Then type: shut-down\nAt your next boot you should see the bootloader prompt.", $of_boot));
-	}
-    }
-}
-
-sub miscellaneous {
-    my ($o, $clicked) = @_;
-
-    if ($::expert) {
-	any::choose_security_level($o, \$o->{security}, \$o->{libsafe}) or return;
-    }
-    install_steps::miscellaneous($o);
-}
-
-#------------------------------------------------------------------------------
-sub configureX {
-    my ($o, $clicked) = @_;
-    $o->configureXBefore;
-
-    #- strange, xfs must not be started twice...
-    #- trying to stop and restart it does nothing good too...
-    my $xfs_started if 0;
-    run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/xfs", "start") unless $::live || $xfs_started;
-    $xfs_started = 1;
-
-    require Xconfigurator;
-    { local $::testing = 0; #- unset testing
-      local $::auto = !$::expert && !$clicked;
-
-      symlink "$o->{prefix}/etc/gtk", "/etc/gtk";
-      Xconfigurator::main($o->{prefix}, $o->{X}, $o, $o->do_pkgs,
-			  { allowFB          => $o->{allowFB},
-			    allowNVIDIA_rpms => install_any::allowNVIDIA_rpms($o->{packages}),
-			  });
-    }
-    $o->configureXAfter;
-}
-
-#------------------------------------------------------------------------------
-sub generateAutoInstFloppy {
-    my ($o, $replay) = @_;
-
-    my $floppy = detect_devices::floppy();
-
-    $o->ask_okcancel('', _("Insert a blank floppy in drive %s", $floppy), 1) or return;
-
-    my $dev = devices::make($floppy);
-    {
-	my $w = $o->wait_message('', _("Creating auto install floppy..."));
-	install_any::getAndSaveAutoInstallFloppy($o, $replay, $dev) or return;
-    }
-    common::sync();         #- if you shall remove the floppy right after the LED switches off
-}
-
-#------------------------------------------------------------------------------
-sub exitInstall {
-    my ($o, $alldone) = @_;
-
-    return $o->{step} = '' unless $alldone || $o->ask_yesorno('', 
-_("Some steps are not completed.
-
-Do you really want to quit now?"), 0);
-
-    install_steps::exitInstall($o);
-
-    $o->exit unless $alldone;
-
-    $o->ask_from_no_check(
-	{
-	 messages => formatAlaTeX(
-_("Congratulations, installation is complete.
-Remove the boot media and press return to reboot.
-
-
-For information on fixes which are available for this release of Mandrake Linux,
-consult the Errata available from:
-
-
-http://www.linux-mandrake.com/en/82errata.php3
-
-
-Information on configuring your system is available in the post
-install chapter of the Official Mandrake Linux User's Guide.")),
-	 cancel => '',
-	},      
-	[
-	 if_($::expert,
-	     { val => \ (my $t1 = _("Generate auto install floppy")), clicked => sub {
-		   my $t = $o->ask_from_list_('', 
-_("The auto install can be fully automated if wanted,
-in that case it will take over the hard drive!!
-(this is meant for installing on another box).
-
-You may prefer to replay the installation.
-"), [ __("Replay"), __("Automated") ]);
-		   $t and $o->generateAutoInstFloppy($t eq 'Replay');
-	       }, advanced => 1 },
-	     { val => \ (my $t2 = _("Save packages selection")), clicked => sub { install_any::g_default_packages($o) }, advanced => 1 },
-	 ),
-	]
-	) if $alldone && !$::g_auto_install;
-}
-
-
-#-######################################################################################
-#- Misc Steps Functions
-#-######################################################################################
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/install_steps_newt.pm b/perl-install/install_steps_newt.pm
deleted file mode 100644
index 2292094b0..000000000
--- a/perl-install/install_steps_newt.pm
+++ /dev/null
@@ -1,61 +0,0 @@
-package install_steps_newt; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(install_steps_interactive interactive_newt);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use install_steps_interactive;
-use interactive_newt;
-use install_any;
-use devices;
-use lang;
-use common;
-
-my $banner = __();
-
-sub banner {
-    my $banner = translate(__("Mandrake Linux Installation %s"));
-    my $l = first(Newt::GetScreenSize) - length($banner) - length($_[0]) + 1;
-    Newt::DrawRootText(0, 0, sprintf($banner, ' ' x $l . $_[0]));
-    Newt::Refresh;
-}
-
-sub new($$) {
-    my ($type, $o) = @_;
-
-    interactive_newt->new;
-
-    banner('');
-    Newt::PushHelpLine(_("  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "));
-
-    (bless {}, ref $type || $type)->SUPER::new($o);
-}
-
-sub enteringStep {
-    my ($o, $step) = @_;
-    $o->SUPER::enteringStep($step);
-    banner(translate($o->{steps}{$step}{text}));
-}
-
-sub exitInstall { 
-    &install_steps_interactive::exitInstall;
-    interactive_newt::end;
-}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
-    my ($o) = @_;
-    $o->SUPER::selectLanguage;
-    lang::load_console_font($o->{lang});
-}
-
-
-1;
-
diff --git a/perl-install/install_steps_stdio.pm b/perl-install/install_steps_stdio.pm
deleted file mode 100644
index 518640d29..000000000
--- a/perl-install/install_steps_stdio.pm
+++ /dev/null
@@ -1,40 +0,0 @@
-package install_steps_stdio; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(install_steps_interactive interactive_stdio);
-
-use common;
-use interactive_stdio;
-use install_steps_interactive;
-use lang;
-
-sub new($$) {
-    my ($type, $o) = @_;
-
-    (bless {}, ref $type || $type)->SUPER::new($o);
-}
-
-sub enteringStep {
-    my ($o, $step) = @_;
-    print _("Entering step `%s'\n", translate($o->{steps}{$step}{text}));
-    $o->SUPER::enteringStep($step);
-}
-sub leavingStep {
-    my ($o, $step) = @_;
-    $o->SUPER::leavingStep($step);
-    print "--------\n";
-}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
-    my ($o, $first_time) = @_;
-    $o->SUPER::selectLanguage($first_time);
-    lang::load_console_font($o->{lang});
-}
-
-1;
diff --git a/perl-install/interactive.pm b/perl-install/interactive.pm
deleted file mode 100644
index b22e703a9..000000000
--- a/perl-install/interactive.pm
+++ /dev/null
@@ -1,400 +0,0 @@
-package interactive; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::Func;
-use common;
-
-#- minimal example using interactive:
-#
-#- > use lib qw(/usr/lib/libDrakX);
-#- > use interactive;
-#- > my $in = interactive->vnew;
-#- > $in->ask_okcancel('title', 'question');
-#- > $in->exit;
-
-#- ask_from_entries takes:
-#-  val      => reference to the value
-#-  label    => description
-#-  icon     => icon to put before the description
-#-  help     => tooltip
-#-  advanced => wether it is shown in by default or only in advanced mode
-#-  disabled => function returning wether it should be disabled (grayed)
-#-  gtk      => gtk preferences
-#-  type     => 
-#-     button => (with clicked or clicked_may_quit)
-#-               (type defaults to button if clicked or clicked_may_quit is there)
-#-               (val need not be a reference) (if clicked_may_quit return true, it's as if "Ok" was pressed)
-#-     label => (val need not be a reference) (type defaults to label if val is not a reference) 
-#-     bool (with text)
-#-     range (with min, max)
-#-     combo (with list, not_edit, format)
-#-     list (with list, icon2f (aka icon), separator (aka tree), format (aka pre_format function),
-#-           help can be a hash or a function,
-#-           tree_expanded boolean telling wether the tree should be wide open by default
-#-           quit_if_double_click boolean
-#-           allow_empty_list disables the special cases for 0 and 1 element lists)
-#-     entry (the default) (with hidden)
-#
-#- heritate from this class and you'll get all made interactivity for same steps.
-#- for this you need to provide
-#- - ask_from_listW(o, title, messages, arrayref, default) returns one string of arrayref
-#-
-#- where
-#- - o is the object
-#- - title is a string
-#- - messages is an refarray of strings
-#- - default is an optional string (default is in arrayref)
-#- - arrayref is an arrayref of strings
-#- - arrayref2 contains booleans telling the default state,
-#-
-#- ask_from_list and ask_from_list_ are wrappers around ask_from_biglist and ask_from_smalllist
-#-
-#- ask_from_list_ just translate arrayref before calling ask_from_list and untranslate the result
-#-
-#- ask_from_listW should handle differently small lists and big ones.
-#-
-
-
-#-######################################################################################
-#- OO Stuff
-#-######################################################################################
-sub new($) {
-    my ($type) = @_;
-
-    bless {}, ref $type || $type;
-}
-
-sub vnew {
-    my ($type, $su, $icon) = @_;
-    $su = $su eq "su";
-    if ($ENV{INTERACTIVE_HTTP}) {
-	require interactive_http;
-	return interactive_http->new;
-    }
-    require c;
-    if ($su) {
-	$ENV{PATH} = "/sbin:/usr/sbin:$ENV{PATH}";
-	$su = '' if $::testing;
-    }
-    if ($ENV{DISPLAY} && system('/usr/X11R6/bin/xtest') == 0) {
-	if ($su && $>) {
-	    if (`/sbin/pidof "kdeinit: kwin"` > 0) {
-		exec("kdesu", "-c", "$0 @ARGV") or die _("kdesu missing");
-	    } else {
-		exec {'consolehelper'} $0, @ARGV or die _("consolehelper missing");
-	    }
-	}
-	eval { require interactive_gtk };
-	if (!$@) {
-	    my $o = interactive_gtk->new;
-	    if ($icon && $icon ne 'default' && !$::isWizard) { $o->{icon} = $icon } else { undef $o->{icon} }
-	    return $o;
-	}
-    } else {
-	if ($su && $>) {
-	    exec {'consolehelper'} $0, @ARGV or die _("consolehelper missing");
-	}
-    }
-
-    if ($su && $>) {
-	die "you must be root to run this program";
-    }
-    require 'log.pm';
-    undef *log::l;
-    *log::l = sub {}; # otherwise, it will bother us :(
-    require interactive_newt;
-    interactive_newt->new;
-}
-
-sub enter_console {}
-sub leave_console {}
-sub suspend {}
-sub resume {}
-sub end {}
-sub exit { exit($_[0]) }
-
-#-######################################################################################
-#- Interactive functions
-#-######################################################################################
-sub ask_warn {
-    my ($o, $title, $message) = @_;
-    local $::isWizard=0;
-    ask_from_listf_no_check($o, $title, $message, undef, [ _("Ok") ]);
-}
-
-sub ask_yesorno {
-    my ($o, $title, $message, $def, $help) = @_;
-    ask_from_list_($o, $title, $message, [ __("Yes"), __("No") ], $def ? "Yes" : "No", $help) eq "Yes";
-}
-
-sub ask_okcancel {
-    my ($o, $title, $message, $def, $help) = @_;
-
-    if ($::isWizard) {
-	$::no_separator = 1;
-    	$o->ask_from_no_check({ title => $title, messages => $message, focus_cancel => !$def });
-    } else {
-	ask_from_list_($o, $title, $message, [ __("Ok"), __("Cancel") ], $def ? "Ok" : "Cancel", $help) eq "Ok";
-    }
-}
-
-sub ask_file {
-    my ($o, $title, $dir) = @_;
-    $o->ask_fileW($title, $dir);
-}
-sub ask_fileW {
-    my ($o, $title, $dir) = @_;
-    $o->ask_from_entry($title, _("Choose a file"));
-}
-
-sub ask_from_list {
-    my ($o, $title, $message, $l, $def, $help) = @_;
-    ask_from_listf($o, $title, $message, undef, $l, $def, $help);
-}
-
-sub ask_from_list_ {
-    my ($o, $title, $message, $l, $def, $help) = @_;
-    ask_from_listf($o, $title, $message, sub { translate($_[0]) }, $l, $def, $help);
-}
-
-sub ask_from_listf_ {
-    my ($o, $title, $message, $f, $l, $def, $help) = @_;
-    ask_from_listf($o, $title, $message, sub { translate($f->(@_)) }, $l, $def, $help);
-}
-sub ask_from_listf {
-    my ($o, $title, $message, $f, $l, $def, $help) = @_;
-    @$l == 0 and die "ask_from_list: empty list\n" . common::backtrace();
-    @$l == 1 and return $l->[0];
-    goto &ask_from_listf_no_check;
-}
-
-sub ask_from_listf_no_check {
-    my ($o, $title, $message, $f, $l, $def, $help) = @_;
-
-    if (@$l <= 2 && !$::isWizard) {
-	my $ret = eval {
-	    ask_from_no_check($o, 
-	      { title => $title, messages => $message, ok => $l->[0] && may_apply($f, $l->[0]), 
-		if_($l->[1], cancel => may_apply($f, $l->[1]), focus_cancel => $def eq $l->[1]) }, []
-            ) ? $l->[0] : $l->[1];
-	};
-	die if $@ && $@ !~ /^wizcancel/;
-	$@ ? undef : $ret;
-    } else {
-	ask_from($o, $title, $message, [ { val => \$def, type => 'list', list => $l, help => $help, format => $f } ]) && $def;
-    }
-}
-
-sub ask_from_treelist {
-    my ($o, $title, $message, $separator, $l, $def) = @_;
-    ask_from_treelistf($o, $title, $message, $separator, undef, $l, $def);
-}
-sub ask_from_treelist_ {
-    my ($o, $title, $message, $separator, $l, $def) = @_;
-    my $transl = sub { join '|', map { translate($_) } split(quotemeta($separator), $_[0]) }; 
-    ask_from_treelistf($o, $title, $message, $separator, $transl, $l, $def);
-}
-sub ask_from_treelistf {
-    my ($o, $title, $message, $separator, $f, $l, $def) = @_;
-    ask_from($o, $title, $message, [ { val => \$def, separator => $separator, list => $l, format => $f, sort => 1 } ]) or return;
-    $def;
-}
-
-sub ask_many_from_list {
-    my ($o, $title, $message, @l) = @_;
-    @l = grep { @{$_->{list}} } @l or return '';
-    foreach my $h (@l) {
-	$h->{e}{$_} = {
-	    text => may_apply($h->{label}, $_),
-	    val => $h->{val} ? $h->{val}->($_) : do {
-		my $i =
-		  $h->{value} ? $h->{value}->($_) : 
-		    $h->{values} ? member($_, @{$h->{values}}) : 0;
-		\$i;
-	    },
-	    type => 'bool',
-	    help => may_apply($h->{help}, $_, ''),
-	    icon => may_apply($h->{icon2f}, $_, ''),
-	} foreach @{$h->{list}};
-	if ($h->{sort}) {
-	    $h->{list} = [ sort { $h->{e}{$a}{text} cmp $h->{e}{$b}{text} } @{$h->{list}} ];
-	}
-    }
-    $o->ask_from($title, $message, [ map { my $h = $_; map { $h->{e}{$_} } @{$h->{list}} } @l ]) or return;
-
-    @l = map {
-	my $h = $_;
-	[ grep { ${$h->{e}{$_}{val}} } @{$h->{list}} ];
-    } @l;
-    wantarray ? @l : $l[0];
-}
-
-sub ask_from_entry {
-    my ($o, $title, $message, %callback) = @_;
-    first(ask_from_entries($o, $title, $message, [''], %callback));
-}
-sub ask_from_entries {
-    my ($o, $title, $message, $l, %callback) = @_;
-
-    my @l = map { my $i = ''; { label => $_, val => \$i } } @$l;
-
-    $o->ask_from($title, $message, \@l, %callback) ?
-      map { ${$_->{val}} } @l :
-      undef;
-}
-
-#- can get a hash of callback: focus_out changed and complete
-#- moreove if you pass a hash with a field list -> combo
-#- if you pass a hash with a field hidden -> emulate stty -echo
-sub ask_from {
-    my ($o, $title, $message, $l, %callback) = @_;
-    ask_from_($o, { title => $title, messages => $message, callbacks => \%callback }, $l);
-}
-
-
-sub ask_from_normalize {
-    my ($o, $common, $l) = @_;
-
-    foreach my $e (@$l) {
-	if (my $li = $e->{list}) {
-	    if ($e->{sort} || @$li > 10 && !exists $e->{sort}) {
-		my @l2 = map { may_apply($e->{format}, $_) } @$li;
-		my @places = sort { $l2[$a] cmp $l2[$b] } 0 .. $#l2;
-		$e->{list} = $li = [ map { $li->[$_] } @places ];
-	    }
-	    $e->{type} = 'iconlist' if $e->{icon2f};
-	    $e->{type} = 'treelist' if $e->{separator};
-	    add2hash_($e, { not_edit => 1 });
-	    $e->{type} ||= 'combo';
-	    ${$e->{val}} = $li->[0] if ($e->{type} ne 'combo' || $e->{not_edit}) && !member(${$e->{val}}, @$li);
-	    if ($e->{type} eq 'combo' && $e->{format}) {
-		my @l = map { $e->{format}->($_) } @{$e->{list}};
-		delete $e->{format};
-		each_index {
-		    ${$e->{val}} = $l[$::i] if $_ eq ${$e->{val}};
-		} @{$e->{list}};
-		($e->{list}, $e->{saved_list}) = (\@l, $e->{list});
-	    }
-	} elsif ($e->{type} eq 'range') {
-	    $e->{min} <= $e->{max} or die "bad range min $e->{min} > max $e->{max} (called from " . join(':', caller()) . ")";
-	    ${$e->{val}} = max($e->{min}, min(${$e->{val}}, $e->{max}));
-	} elsif ($e->{type} eq 'button' || $e->{clicked} || $e->{clicked_may_quit}) {
-	    $e->{type} = 'button';
-	    $e->{clicked_may_quit} ||= $e->{clicked} ? sub { $e->{clicked}(); 0 } : sub {};	    
-	    $e->{val} = \ (my $v = $e->{val}) if !ref($e->{val});
-	} elsif ($e->{type} eq 'label' || !ref($e->{val})) {
-	    $e->{type} = 'label';
-	    $e->{val} = \ (my $v = $e->{val}) if !ref($e->{val});
-	} else {
-	    $e->{type} ||= 'entry';
-	}
-	$e->{disabled} ||= sub { 0 };
-    }
-
-    #- don't display empty lists and one element lists
-    @$l = grep { 
-	if ($_->{list} && $_->{not_edit} && !$_->{allow_empty_list}) {
-	    if (@{$_->{list}} == ()) {
-		eval {
-		    require log;
-		    log::l("ask_from_normalize: empty list for $_->{label}\n" . common::backtrace());
-		};
-	    }
-	    @{$_->{list}} > 1;
-	} else {
-	    1;
-	}
-    } @$l;
-
-    $common->{advanced_label} ||= _("Advanced");
-    $common->{advanced_label_close} ||= _("Basic");
-    $common->{$_} = [ deref($common->{$_}) ] foreach qw(messages advanced_messages);
-    add2hash_($common, { ok => _("Ok"), cancel => _("Cancel") }) if !exists $common->{ok} && !$::isWizard;
-    add2hash_($common->{callbacks} ||= {}, { changed => sub {}, focus_out => sub {}, complete => sub { 0 }, canceled => sub { 0 } });
-}
-
-sub ask_from_ {
-    my ($o, $common, $l) = @_;
-    ask_from_normalize($o, $common, $l);
-    @$l or return 1;
-    ask_from_real($o, $common, $l);
-}
-sub ask_from_no_check {
-    my ($o, $common, $l) = @_;
-    ask_from_normalize($o, $common, $l);
-    $o->ask_fromW($common, [ grep { !$_->{advanced} } @$l ], [ grep { $_->{advanced} } @$l ]);
-}
-sub ask_from_real {
-    my ($o, $common, $l) = @_;
-    my $v = $o->ask_fromW($common, [ grep { !$_->{advanced} } @$l ], [ grep { $_->{advanced} } @$l ]);
-    %$common = ();
-    foreach my $e (@$l) {
-	my $l = delete $e->{saved_list} or next;
-	each_index {
-	    ${$e->{val}} = $l->[$::i] if $_ eq ${$e->{val}};
-	} @{$e->{list}};
-	$e->{list} = $l;
-    }
-    $v;
-}
-
-
-sub ask_browse_tree_info {
-    my ($o, $title, $message, $common) = @_;
-    add2hash_($common, { ok => _("Ok"), cancel => _("Cancel") });
-    add2hash_($common, { title => $title, message => $message });
-    add2hash_($common, { grep_allowed_to_toggle      => sub { @_ },
-			 grep_unselected             => sub { grep { $common->{node_state}($_) eq 'unselected' } @_ },
-			 check_interactive_to_toggle => sub { 1 },
-			 toggle_nodes                => sub {
-			     my ($set_state, @nodes) = @_;
-			     my $new_state = !$common->{grep_unselected}($nodes[0]) ? 'selected' : 'unselected';
-			     $set_state->($_, $new_state) foreach @nodes;
-			 },
-		       });
-    $o->ask_browse_tree_info_refW($common);
-}
-sub ask_browse_tree_info_refW { #- default definition, do not use with too many items (memory consuming)
-    my ($o, $common) = @_;
-    my ($l, $v, $h) = ([], [], {});
-    $common->{build_tree}(sub {
-			      my ($node) = $common->{grep_allowed_to_toggle}(@_);
-			      if (my $state = $node && $common->{node_state}($node)) {
-				  push @$l, $node;
-				  $state eq 'selected' and push @$v, $node;
-				  $h->{$node} = $state eq 'selected';
-			      }
-			  }, 'flat');
-    add2hash_($common, { list   => $l, #- TODO interactivity of toggle is missing
-			 values => $v,
-			 help   => sub { $common->{get_info}($_[0]) },
-		       });
-    my ($new_v) = $o->ask_many_from_list($common->{title}, $common->{message}, $common) or return;
-    $common->{toggle_nodes}(sub {}, grep { ! delete $h->{$_} } @$new_v);
-    $common->{toggle_nodes}(sub {}, grep { $h->{$_} } keys %$h);
-    1;
-}
-
-sub wait_message {
-    my ($o, $title, $message, $temp) = @_;
-
-    my $w = $o->wait_messageW($title, [ _("Please wait"), deref($message) ]);
-    push @tempory::objects, $w if $temp;
-    my $b = before_leaving { $o->wait_message_endW($w) };
-
-    #- enable access through set
-    MDK::Common::Func::add_f4before_leaving(sub { $o->wait_message_nextW([ deref($_[1]) ], $w) }, $b, 'set');
-    $b;
-}
-
-sub kill {}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/keyboard.pm b/perl-install/keyboard.pm
deleted file mode 100644
index fe2e0f3b0..000000000
--- a/perl-install/keyboard.pm
+++ /dev/null
@@ -1,542 +0,0 @@
-
-package keyboard; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use detect_devices;
-use run_program;
-use log;
-use c;
-
-
-#-######################################################################################
-#- Globals
-#-######################################################################################
-my $KMAP_MAGIC = 0x8B39C07F;
-
-#- a best guess of the keyboard layout, based on the choosen locale
-#- beware only the first 5 characters of the locale are used
-my %lang2keyboard =
-(
-  'af' => 'us_intl',
-#-'ar' => 'ar:80 ar_d:70 ar_azerty:60 ar_azerty_d:50',
-  'az' => 'az:80 tr:10 us_intl:5',
-'az_AZ'=> 'az:80 tr:10 us_intl:5',
-  'be' => 'by:80 ru:50 ru_yawerty:40',
-'be_BE'=> 'by:80 ru:50 ru_yawerty:40',
-  'bg' => 'bg_phonetic:60 bg:50',
-'bg_BG'=> 'bg_phonetic:60 bg:50',
-  'br' => 'fr:90',
-  'bs' => 'hr:60 yu:50 si:40',
-  'ca' => 'es:89 fr:15',
-'ca_Es'=> 'es:89 fr:15',
-  'cs' => 'cz_qwerty:70 cz:50',
-  'cy' => 'uk:90',
-'cy_GB'=> 'uk:90',
-  'da' => 'dk:90',
-  'de' => 'de_nodeadkeys:70 de:50',
-'de_AT'=> 'de_nodeadkeys:70 de:50',
-'de_BE'=> 'be:70 de_nodeadkeys:60 de:50',
-'de_CH'=> 'ch_de:70 ch_fr:25 de_nodeadkeys:20 de:15',
-'de_DE'=> 'de_nodeadkeys:70 de:50', 
-'de_LU'=> 'de_nodeadkeys:70 de:50 fr:40 be:35', 
-  'el' => 'gr:90',
-'el_GR'=> 'gr:90',
-  'en' => 'us:90 us_intl:50',
-'en_US'=> 'us:90 us_intl:50',
-'en_GB'=> 'uk:89 us:60 us_intl:50',
-'en_IE'=> 'uk:89 us:60 us_intl:50',
-  'eo' => 'us_intl:89 dvorak:20',
-'eo_XX'=> 'us_intl:89 dvorak:20',
-  'es' => 'es:85 la:80 us_intl:50',
-'es@tr'=> 'es:85 la:80 us_intl:50',
-'es_AR'=> 'la:80 us_intl:50 es:20',
-'es_ES'=> 'es:90',
-'es_MX'=> 'la:80 us_intl:50 es:20',
-  'et' => 'ee:90',
-  'eu' => 'es:89 fr:15',
-'eu_ES'=> 'es:89 fr:15',
-  'fa' => 'ir:90',
-  'fi' => 'fi:90',
-  'fr' => 'fr:90',
-'fr_BE'=> 'be:85 fr:5',
-'fr_CA'=> 'qc:85 fr:5',
-'fr_CH'=> 'ch_fr:70 ch_de:15 fr:10',
-'fr_FR'=> 'fr:90',
-'fr_LU'=> 'fr:70 de_nodeadkeys:50 de:40 be:35', 
-  'ga' => 'uk:90',
-'ga_IE'=> 'uk:90',
-  'gd' => 'uk:90',
-  'gl' => 'es:90',
-'gl_ES'=> 'es:90',
-  'gv' => 'uk:90',
-  'he' => 'il:89 il_phonetic:10',
-'he_IL'=> 'il:89 il_phonetic:10',
-  'hr' => 'hr:80 si:50',
-  'hu' => 'hu:90',
-  'hy' => 'am:80 am_old:10 am_phonetic:5',
-'hy_AM'=> 'am:80 am_old:10 am_phonetic:5',
-  'id' => 'us:90 us_intl:20',
-  'is' => 'is:90',
-  'iu' => 'iu:90',
-  'it' => 'it:90',
-'it_CH'=> 'ch_fr:80 ch_de:60 it:50',
-'it_IT'=> 'it:90',
-  'ja' => 'jp:80 us:50 us_intl:20',
-'ja_JP'=> 'jp:80 us:50 us_intl:20',
-  'ka' => 'ge_la:80 ge_ru:50',
-'ka_GE'=> 'ge_la:80 ge_ru:50',
-  'kl' => 'dk:80 us_intl:30',
-  'ko' => 'kr:80 us:60',
-'ko_KR'=> 'kr:80 us:60',
-  'kw' => 'uk:90',
-  'lo' => 'us:60',
-  'lt' => 'lt:80 lt_new:70 lt_b:60 lt_p:50',
-  'lv' => 'lv:80 lt:40 lt_new:30 lt_b:20 lt_p:10 ee:5',
-  'mi' => 'us_intl:60 uk:20 us:10',
-'mk_MK'=> 'mk:80',
-  'mk' => 'mk:80',
-  'ms' => 'us:90 us_intl:20',
-  'nb' => 'no:85 dvorak_no:10',
-'nl_BE'=> 'be:80 nl:10 us_intl:5',
-'nl_NL'=> 'us_intl:80 nl:15 us:10 uk:5',
-  'nn' => 'no:85 dvorak_no:10',
-  'no' => 'no:85 dvorak_no:10',
-  'oc' => 'fr:90',
-  'ph' => 'us:90 us_intl:20',
-  'pl' => 'pl:80 pl2:60',
-  'pp' => 'br:80 la:20 pt:10 us_intl:30',
-'pt_BR'=> 'br:80 la:20 pt:10 us_intl:30',
-'pt_PT'=> 'pt:80',
-  'ro' => 'ro2:80 ro:40 us_intl:10',
-  'ru' => 'ru:85 ru_yawerty:80',
-'ru_RU'=> 'ru:85 ru_yawerty:80',
-'ru_UA'=> 'ua:50 ru:40 ru_yawerty:30',
-  'sk' => 'sk_qwerty:80 sk:70',
-  'sl' => 'si:80 hr:50',
-  'sp' => 'sr:80',
-'sp_YU'=> 'sr:80',
-  'sq' => 'al:80',
-  'sr' => 'yu:80',
-'sr_YU'=> 'yu:80',
-  'sv' => 'se:85 fi:30 dvorak_se:10',
-'sv_FI'=> 'fi:85 sv:20',
-'sv_SE'=> 'se:85 fi:20',
-  'ta' => 'tml:80',
-'ta_IN'=> 'tml:80',
-  'tg' => 'tj:80 ru_yawerty:40',
-'tg_TJ'=> 'tj:80 ru_yawerty:40',
-  'th' => 'th:90',
-'th_TH'=> 'th:90',
-  'tr' => 'tr_q:85 tr_q:30',
-  'tt' => 'ru:50 ru_yawerty:40',
-  'uk' => 'ua:85 ru:50 ru_yawerty:40',
-'uk_UA'=> 'ua:85 ru:50 ru_yawerty:40',
-  'uz' => 'us:80',
-  'vi' => 'vn:80 us:60 us_intl:50',
-'vi_VN'=> 'vn:80 us:60 us_intl:50',
-  'wa' => 'be:85 fr:5',
-'zh_CN'=> 'us:60',
-'zh_HK'=> 'us:60',
-'zh_TW'=> 'us:60',
-);
-
-# USB kbd table
-# The numeric values are the bCountryCode field (5th byte)  of HID descriptor
-my %usb2drakxkbd =
-(
-  0x00 => undef, #- the keyboard don't tell its layout
-#-0x01 => 'ar',
-  0x02 => 'be',
-#-0x03 => 'ca', #- "Canadian bilingual" ??
-  0x04 => 'qc', #- Canadian French
-  0x05 => 'cz',
-  0x06 => 'dk',
-  0x07 => 'fi',
-  0x08 => 'fr',
-  0x09 => 'de',
-  0x0a => 'gr',
-  0x0b => 'il',
-  0x0c => 'hu',
-  0x0d => 'us_intl', #- "international ISO" ??
-  0x0e => 'it',
-  0x0f => 'jp',
-  0x10 => 'kr', #- Korean
-  0x11 => 'la',
-  0x12 => 'nl',
-  0x13 => 'no',
-  0x14 => 'ir',
-  0x15 => 'pl',
-  0x16 => 'pt',
-  0x17 => 'ru',
-  0x18 => 'sk',
-  0x19 => 'es',
-  0x1a => 'se',
-  0x1b => 'ch_de',
-  0x1c => 'ch_de',
-  0x1d => 'ch_de', #- USB spec says just "Swiss"
-#-0x1e => 'tw', # Taiwan
-  0x1f => 'tr_q',
-  0x20 => 'uk',
-  0x21 => 'us',
-  0x22 => 'yu',
-  0x23 => 'tr_f',
-#- higher codes not attribued as of 2002-02
-);
-
-#- key = extension for Xmodmap file, [0] = description of the keyboard,
-#- [1] = name for loadkeys, [2] = name for XKB, [3] = "1" if it is
-#- a multigroup layout (eg: one with latin/non-latin letters)
-my %keyboards = (
-arch() =~ /^sparc/ ? (
- "cz" => [ __("Czech (QWERTZ)"), "sunt5-cz-us",	    "cz",    0 ],
- "de" => [ __("German"),         "sunt5-de-latin1", "de",    0 ],
- "dvorak" => [ __("Dvorak"),     "sundvorak",       "dvorak",0 ],
- "es" => [ __("Spanish"),        "sunt5-es",        "es",    0 ],
- "fi" => [ __("Finnish"),        "sunt5-fi-latin1", "fi",    0 ],
- "fr" => [ __("French"),         "sunt5-fr-latin1", "fr",    0 ],
- "no" => [ __("Norwegian"),      "sunt4-no-latin1", "no",    0 ],
- "pl" => [ __("Polish"),         "sun-pl-altgraph", "pl",    0 ],
- "ru" => [ __("Russian"),        "sunt5-ru",        "ru",    1 ],
-# TODO: check the console map
- "se" => [ __("Swedish"),        "sunt5-fi-latin1", "se",    0 ],
- "uk" => [ __("UK keyboard"),    "sunt5-uk",        "gb",    0 ],
- "us" => [ __("US keyboard"),    "sunkeymap",       "us",    0 ],
-) : (
- "al" => [ __("Albanian"),       "al",              "al",    0 ],
- "am_old" => [ __("Armenian (old)"),"am_old",	    "am(old)", 1 ],
- "am" => [ __("Armenian (typewriter)"),"am-armscii8","am",   1 ],
- "am_phonetic" => [ __("Armenian (phonetic)"),"am_phonetic","am(phonetic)",1 ],
-#-"ar_azerty" => [ __("Arabic (AZERTY)"),"ar-8859_6","ar(azerty)",1 ],
-#-"ar_azerty_d" => [ __("Arabic (AZERTY, arabic digits)"),"ar-8859_6","ar(azerty_digits)",1 ],
-#-"ar" => [ __("Arabic (QWERTY)"),"ar-8859_6",      "ar",    1 ],
-#-"ar_d" => [ __("Arabic (QWERTY, arabic digits)"),"ar-8859_6","ar(digits)",1 ],
- "az" => [ __("Azerbaidjani (latin)"),"az",         "az",    0 ],
-#"a3" => [ __("Azerbaidjani (cyrillic)"), "az-koi8k","az(cyrillic)",1 ],
- "be" => [ __("Belgian"),        "be2-latin1",      "be",    0 ],
-"bg_phonetic" => [ __("Bulgarian (phonetic)"),"bg", "bg(phonetic)", 1 ],
- "bg" => [ __("Bulgarian (BDS)"), "bg",             "bg",    1 ],
- "br" => [ __("Brazilian (ABNT-2)"),"br-abnt2",     "br",    0 ],
- "by" => [ __("Belarusian"),      "by-cp1251",      "by",    1 ],
- "ch_de" => [ __("Swiss (German layout)"), "sg-latin1", "de_CH", 0 ],
- "ch_fr" => [ __("Swiss (French layout)"), "fr_CH-latin1", "fr_CH", 0 ],
- "cz" => [ __("Czech (QWERTZ)"), "cz-latin2",       "cz",    0 ],
- "cz_qwerty" => [ __("Czech (QWERTY)"), "cz-lat2", "cz_qwerty", 0 ],
- "de" => [ __("German"),         "de-latin1",       "de",    0 ],
- "de_nodeadkeys" => [ __("German (no dead keys)"), "de-latin1-nodeadkeys", "de(nodeadkeys)", 0 ],
- "dk" => [ __("Danish"),         "dk-latin1",       "dk",    0 ],
- "dvorak" => [ __("Dvorak (US)"), "pc-dvorak-latin1", "dvorak", 0 ],
- "dvorak_no" => [ __("Dvorak (Norwegian)"), "no-dvorak", "dvorak(no)", 0 ],
- "dvorak_se" => [ __("Dvorak (Swedish)"), "se-dvorak", "dvorak(se)", 0 ],
- "ee" => [ __("Estonian"),       "ee-latin9",       "ee",    0 ],
- "es" => [ __("Spanish"),        "es-latin1",       "es",    0 ],
- "fi" => [ __("Finnish"),        "fi-latin1",       "fi",    0 ],
- "fr" => [ __("French"),         "fr-latin1",       "fr",    0 ],
- "ge_ru"=>[__("Georgian (\"Russian\" layout)"),"ge_ru-georgian_academy","ge_ru",1],
- "ge_la"=>[__("Georgian (\"Latin\" layout)"),"ge_la-georgian_academy","ge_la",1],
- "gr" => [ __("Greek"),          "gr-8859_7",       "el",    1 ],
- "hu" => [ __("Hungarian"),      "hu-latin2",       "hu",    0 ],
- "hr" => [ __("Croatian"),	 "croat",           "hr",    0 ],
- "il" => [ __("Israeli"),        "il-8859_8",       "il",    1 ],
- "il_phonetic" => [ __("Israeli (Phonetic)"), "hebrew", "il_phonetic", 1 ],
- "ir" => [ __("Iranian"),        "ir-isiri_3342",   "ir",    1 ],
- "is" => [ __("Icelandic"),      "is-latin1",       "is",    0 ],
- "it" => [ __("Italian"),        "it-latin1",       "it",    0 ],
-#"iu" => [ __("Inuktitut"),      "iu",              "iu",    1 ],
- "jp" => [ __("Japanese 106 keys"), "jp106",        "jp",    1 ],
-#There is no XKB korean file yet; but using xmodmap one disables
-#�some functioanlity; "us" used for XKB until this is fixed
- "kr" => [ __("Korean keyboard"), "us",             "us",    1 ],
- "la" => [ __("Latin American"), "la-latin1",       "la",    0 ],
- "lt" => [ __("Lithuanian AZERTY (old)"), "lt-latin7", "lt_a", 0 ],
-#- TODO: write a console kbd map for lt_new
- "lt_new" => [ __("Lithuanian AZERTY (new)"), "lt-latin7", "lt_std", 0 ],
- "lt_b" => [ __("Lithuanian \"number row\" QWERTY"), "ltb-latin7", "lt", 0 ],
- "lt_p" => [ __("Lithuanian \"phonetic\" QWERTY"), "ltp-latin7", "lt_p", 0 ],
- "lv" => [ __("Latvian"),	 "lv-latin7",       "lv",    0 ],
- "mk" => [ __("Macedonian"),	 "mk",              "mk",    1 ],
- "nl" => [ __("Dutch"),          "nl-latin1",       "nl",    0 ],
- "no" => [ __("Norwegian"),      "no-latin1",       "no",    0 ],
- "pl" => [ __("Polish (qwerty layout)"), "pl",      "pl",    0 ],
- "pl2" => [ __("Polish (qwertz layout)"), "pl-latin2", "pl2", 0 ],
- "pt" => [ __("Portuguese"),     "pt-latin1",       "pt",    0 ],
- "qc" => [ __("Canadian (Quebec)"), "qc-latin1", "ca_enhanced", 0 ],
-#- TODO: write a console kbd map for ro2
- "ro2" => [ __("Romanian (qwertz)"), "ro2",         "ro2",   0 ],
- "ro" => [ __("Romanian (qwerty)"), "ro",           "ro",    0 ],
- "ru" => [ __("Russian"),        "ru4",             "ru(winkeys)", 1 ],
- "ru_yawerty" => [ __("Russian (Yawerty)"), "ru-yawerty", "ru_yawerty", 1 ],
- "se" => [ __("Swedish"),        "se-latin1",       "se",    0 ],
- "si" => [ __("Slovenian"),      "slovene",         "si",    0 ],
- "sk" => [ __("Slovakian (QWERTZ)"), "sk-qwertz",   "sk",    0 ],
- "sk_qwerty" => [ __("Slovakian (QWERTY)"), "sk-qwerty", "sk_qwerty", 0 ],
-# TODO: console map
- "sr" => [ __("Serbian (cyrillic)"), "sr",          "sr",    0 ],
-# no console kbd that I'm aware of
- "tml" => [ __("Tamil"),	 "us",              "tml",   1 ],
- "th" => [ __("Thai keyboard"),  "th",              "th",    1 ],
-# TODO: console map
- "tj" => [ __("Tajik keyboard"), "ru4",             "tj",    1 ],
- "tr_f" => [ __("Turkish (traditional \"F\" model)"), "trf", "tr_f", 0 ],
- "tr_q" => [ __("Turkish (modern \"Q\" model)"), "tr_q-latin5", "tr", 0 ],
-#-"tw => [ __("Chineses bopomofo"), "tw",           "tw",    1 ],
- "ua" => [ __("Ukrainian"),      "ua",              "ua",    1 ],
- "uk" => [ __("UK keyboard"),    "uk",              "gb",    0 ],
- "us" => [ __("US keyboard"),    "us",              "us",    0 ],
- "us_intl" => [ __("US keyboard (international)"), "us-latin1", "us_intl", 0 ],
- "vn" => [ __("Vietnamese \"numeric row\" QWERTY"),"vn-tcvn", "vn(toggle)", 0 ], 
- "yu" => [ __("Yugoslavian (latin)"), "sr",         "yu",    0 ],
-),
-);
-
-#- list of  possible choices for the key combinations to toggle XKB groups
-#- (eg in X86Config file: XkbOptions "grp:toggle")
-my %kbdgrptoggle =
-(
-  'toggle' => _("Right Alt key"),
-  'shift_toggle' => _("Both Shift keys simultaneously"),
-  'ctrl_shift_toggle' => _("Control and Shift keys simultaneously"),
-  'caps_toggle' => _("CapsLock key"),
-  'ctrl_alt_toggle' => _("Ctrl and Alt keys simultaneously"),
-  'alt_shift_toggle' => _("Alt and Shift keys simultaneously"),
-  'menu_toggle' => _("\"Menu\" key"),
-  'lwin_toggle' => _("Left \"Windows\" key"),
-  'rwin_toggle' => _("Right \"Windows\" key"),
-);
-
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub keyboards { keys %keyboards }
-sub keyboard2text { $keyboards{$_[0]} && $keyboards{$_[0]}[0] }
-sub keyboard2kmap { $keyboards{$_[0]} && $keyboards{$_[0]}[1] }
-sub keyboard2xkb  { $keyboards{$_[0]} && $keyboards{$_[0]}[2] }
-
-sub loadkeys_files {
-    my ($err) = @_;
-    my $archkbd = arch() =~ /^sparc/ ? "sun" : arch() =~ /i.86/ ? "i386" : arch() =~ /ppc/ ? "mac" : arch();
-    my $p = "/usr/lib/kbd/keymaps/$archkbd";
-    my $post = ".kmap.gz";
-    my %trans = ("cz-latin2" => "cz-lat2");
-    my %find_file;
-    foreach my $dir (all($p)) {
-	$find_file{$dir} = '';
-	foreach (all("$p/$dir")) {
-	    $find_file{$_} and $err->("file $_ is both in $find_file{$_} and $dir") if $err;
-	    $find_file{$_} = "$p/$dir/$_";
-	}
-    }
-    my (@l, %l);
-    foreach (values %keyboards) {
-	local $_ = $trans{$_->[1]} || $_->[1];
-	my $l = $find_file{"$_$post"} || $find_file{first(/(..)/) . $post};
-	if ($l) {
-	    push @l, $l;
-	    foreach (`zgrep include $l | grep "^include"`) {
-		/include\s+"(.*)"/ or die "bad line $_";
-		@l{grep { -e $_ } ("$p/$1.inc.gz")} = ();
-	    }
-	} else {
-	    $err->("invalid loadkeys keytable $_") if $err;
-	}
-    }
-    uniq(@l, keys %l, grep { -e $_ } map { "$p/$_.inc.gz" } qw(compose euro windowkeys linux-keys-bare));
-}
-
-sub unpack_keyboards {
-    my ($k) = @_; $k or return;
-    [ grep { 
-	my $b = $keyboards{$_->[0]};
-	$b or log::l("bad keyboard $_->[0] in %keyboard::lang2keyboard");
-	$b;
-    } map { [ split ':' ] } split ' ', $k ];
-}
-sub lang2keyboards {
-    my @li = sort { $b->[1] <=> $a->[1] } map { @$_ } map {
-	#- first try with the 5 first chars of LANG; if it fails then try with
-	#- with the 2 first chars of LANG before resorting to default. 
-	unpack_keyboards($lang2keyboard{substr($_, 0, 5)}) || unpack_keyboards($lang2keyboard{substr($_, 0, 2)}) || [ [ ($keyboards{$_} ? $_ : "us") => 100 ] ];
-    } @_;
-    \@li;
-}
-sub lang2keyboard {
-    my ($l) = @_;
-    my $kb = lang2keyboards($l)->[0][0];
-    $keyboards{$kb} ? $kb : "us"; #- handle incorrect keyboard mapping to us.
-}
-sub usb2drakxkbd {
-    my ($cc) = @_;
-    my $kb = $usb2drakxkbd{$cc};
-#- TODO: detect when undef is returned because it is actualy not defined
-#- ($cc == 0) and when it is because of an unknown/not listed number;
-#- in that last case it would be nice to display a dialog telling the
-#- user to report the number to us.
-    $kb;
-}
-
-sub load {
-    my ($keymap) = @_;
-    return if $::testing;
-
-    my ($magic, @keymaps) = unpack "I i" . c::MAX_NR_KEYMAPS() . "a*", $keymap;
-    $keymap = pop @keymaps;
-
-    $magic != $KMAP_MAGIC and die "failed to read kmap magic";
-
-    local *F;
-    sysopen F, "/dev/console", 2 or die "failed to open /dev/console: $!";
-
-    my $count = 0;
-    foreach (0 .. c::MAX_NR_KEYMAPS() - 1) {
-	$keymaps[$_] or next;
-
-	my @keymap = unpack "s" . c::NR_KEYS() . "a*", $keymap;
-	$keymap = pop @keymap;
-
-	my $key = -1;
-	foreach my $value (@keymap) {
-	    $key++;
-	    c::KTYP($value) != c::KT_SPEC() or next;
-	    ioctl(F, c::KDSKBENT(), pack("CCS", $_, $key, $value)) or die "keymap ioctl failed ($_ $key $value): $!";
-	 }
-	$count++;
-    }
-    #- log::l("loaded $count keymap tables");
-}
-
-sub xmodmap_file {
-    my ($keyboard) = @_;
-    my $f = "$ENV{SHARE_PATH}/xmodmap/xmodmap.$keyboard";
-    if (! -e $f) {
-	eval {
-	    require packdrake;
-	    my $packer = new packdrake("$ENV{SHARE_PATH}/xmodmap.cz2", quiet => 1);
-	    $packer->extract_archive("/tmp", "xmodmap.$keyboard");
-	};
-	$f = "/tmp/xmodmap.$keyboard";
-    }
-    -e $f && $f;
-}
-
-sub setup {
-    return if arch() =~ /^sparc/;
-
-    #- Xpmac doesn't map keys quite right
-    if (arch() =~ /ppc/ && !$::testing && $ENV{DISPLAY}) {
-	log::l("Fixing Mac keyboard");
-	run_program::run('xmodmap', "-e",  "keycode 59 = BackSpace" );
-	run_program::run('xmodmap', "-e",  "keycode 131 = Shift_R" );
-	run_program::run('xmodmap', "-e",  "add shift = Shift_R" );
-	return;
-    }
-
-    my ($keyboard) = @_;
-    my $o = $keyboards{$keyboard} or return;
-
-    log::l("loading keymap $o->[1]");
-    if (-e (my $f = "$ENV{SHARE_PATH}/keymaps/$o->[1].bkmap")) {
-	load(scalar cat_($f));
-    } else {
-	local *F;
-	if (my $pid = open F, "-|") {
-	    local $/ = undef;
-	    eval { load(join('', <F>)) };
-	    waitpid $pid, 0;
-	} else {
-	    eval {
-		require packdrake;
-		my $packer = new packdrake("$ENV{SHARE_PATH}/keymaps.cz2", quiet => 1);
-		$packer->extract_archive(undef, "$o->[1].bkmap");
-	    };
-	    c::_exit(0);
-	}
-    }
-    my $f = xmodmap_file($keyboard);
-    eval { run_program::run('xmodmap', $f) } if $f && !$::testing && $ENV{DISPLAY};
-}
-
-sub write {
-    my ($prefix, $keyboard, $charset, $isNotDelete) = @_;
-
-    my $config = read_raw($prefix);
-    put_in_hash($config, {
-			  KEYTABLE => keyboard2kmap($keyboard), 
-			  KBCHARSET => $charset,
-			 });
-    add2hash_($config, {
-			DISABLE_WINDOWS_KEY => bool2yesno(detect_devices::isLaptop()),
-			BACKSPACE => $isNotDelete ? "BackSpace" : "Delete",
-		       });
-    setVarsInSh("$prefix/etc/sysconfig/keyboard", $config);
-    run_program::rooted($prefix, "dumpkeys > /etc/sysconfig/console/default.kmap") or log::l("dumpkeys failed");
-    if (arch() =~ /ppc/) {
-	my $s = "dev.mac_hid.keyboard_sends_linux_keycodes = 1\n";
-	substInFile { 
-            $_ = '' if /^\Qdev.mac_hid.keyboard_sends_linux_keycodes/;
-            $_ .= $s if eof;
-        } "$prefix/etc/sysctl.conf";
-    }
-}
-
-sub read_raw {
-    my ($prefix) = @_;
-    my %config = getVarsFromSh("$prefix/etc/sysconfig/keyboard");
-    \%config;
-}
-
-sub read {
-    my ($prefix) = @_;
-    my $keytable = read_raw($prefix)->{KEYTABLE};
-    keyboard2kmap($_) eq $keytable and return $_ foreach keys %keyboards;
-    $keyboards{$keytable} && $keytable; #- keep track of unknown keyboard.
-}
-
-sub check {
-    require lang;
-    $^W = 0;
-
-    my $ok = 1;
-    my $warn = sub {
-	print STDERR "$_[0]\n";
-    };
-    my $err = sub {
-	&$warn;
-	$ok = 0;
-    };
-
-    if (my @l = grep { is_empty_array_ref(lang2keyboards($_)) } lang::list()) {
-	$warn->("no keyboard for langs " . join(" ", @l));
-    }
-    foreach my $lang (lang::list()) {
-	my $l = lang2keyboards($lang);
-	foreach (@$l) {
-	    0 <= $_->[1] && $_->[1] <= 100 or $err->("invalid value $_->[1] in $lang2keyboard{$lang} for $lang in \%lang2keyboard keyboard.pm");
-	    $keyboards{$_->[0]} or $err->("invalid keyboard $_->[0] in $lang2keyboard{$lang} for $lang in \%lang2keyboard keyboard.pm");
-	}
-    }
-    !$_ || $keyboards{$_} or $err->("invalid keyboard $_ in \%usb2drakxkbd keyboard.pm") foreach values %usb2drakxkbd;
-
-    my @xkb_groups = map { if_(/grp:(\S+)/, $1) } cat_('/usr/lib/X11/xkb/rules/xfree86.lst');
-    $err->("invalid xkb group toggle '$_' in \%kbdgrptoggle") foreach difference2([ keys %kbdgrptoggle ], \@xkb_groups);
-    $warn->("unused xkb group toggle '$_'") foreach difference2(\@xkb_groups, [ keys %kbdgrptoggle ]);
-
-    my @xkb_layouts = (#- (map { (split)[0] } grep { /^! layout/ .. /^\s*$/ } cat_('/usr/lib/X11/xkb/rules/xfree86.lst')),
-		       all('/usr/lib/X11/xkb/symbols'),
-		       (map { (split)[2] } cat_('/usr/lib/X11/xkb/symbols.dir')));
-    $err->("invalid xkb layout $_") foreach difference2([ map { keyboard2xkb($_) } keyboards() ], \@xkb_layouts);
-
-    loadkeys_files($err);
-
-    exit($ok ? 0 : 1);
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/lang.pm b/perl-install/lang.pm
deleted file mode 100644
index 5c70b235c..000000000
--- a/perl-install/lang.pm
+++ /dev/null
@@ -1,902 +0,0 @@
-package lang; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use log;
-
-#-######################################################################################
-#- Globals
-#-######################################################################################
-#- key (to be used in $LC_ALL), [0] = english name, [1] = charset encoding,
-#- [2] = value for $LANG used by DrakX, [3] = value for LANGUAGE (a list of
-#- possible languages, carefully choosen)
-#-
-#- when adding a new language here, also add a line in keyboards list
-
-#
-# NOTE: we cheat for a lot of locales (in particular UTF-8, in DrakX they are
-# the 8bit ones); it's easier like that now. Of course, on the installed
-# system a real UTF-8 locale will be used
-#
-
-my %languages = my @languages = (
-'en_US' => [ 'English|United States',	'C', 'en', 'en_US:en' ],
-'en_GB' => [ 'English|United Kingdom',	'iso-8859-15', 'en', 'en_GB:en' ],
-'en_IE' => [ 'English|Ireland',		'iso-8859-15','en', 'en_IE:en_GB:en' ],
-'en_US.UTF-8'=> [ 'English|UTF-8',	'utf_15',     'en', 'en_US:en' ],
-  'af'  => [ 'Afrikaans',		'iso-8859-1', 'af', 'af:en_ZA' ],
-'ar_EG.UTF-8'=> [ 'Arabic',		'utf_ar',     'ar', 'ar' ],
-#'az_AZ.ISO-8859-9E'=> [ 'Azeri (Latin)','iso-8859-9e','az', 'az:tr' ],
-'az_AZ.UTF-8'=> [ 'Azeri (Latin)',	'utf_az',     'az', 'az:tr' ],
-  'be'  => [ 'Belarussian (CP1251)',	'cp1251',     'be', 'be:be_BY.CP1251:ru_RU.CP1251' ],
-'be_BY.UTF-8'  => [ 'Belarussian (UTF-8)','utf_1251',   'be', 'be:be_BY.CP1251:ru_RU.CP1251' ],
-#- provide aliases for some not very standard names used in po files...
-  'bg'  => [ 'Bulgarian (CP1251)',	'cp1251',     'bg', 'bg:bg.CP1251:bg_BG.CP1251:bg_BG' ],
-'bg_BG.UTF-8'=> [ 'Bulgarian (UTF-8)',	'utf_1251',   'bg', 'bg:bg.CP1251:bg_BG.CP1251:bg_BG' ],
-  'br'  => [ 'Brezhoneg',		'iso-8859-15','br', 'br:fr_FR:fr' ],
-  'bs'  => [ 'Bosnian',			'iso-8859-2', 'bs', 'bs:hr:sr' ],
-'ca_ES' => [ 'Catalan',			'iso-8859-15','ca', 'ca:es_ES:es' ],
-  'cs'  => [ 'Czech',			'iso-8859-2', 'cs', 'cs' ],
-#  'cy'  => [ 'Cymraeg (Welsh)','iso-8859-14','cy', 'cy:en_GB:en' ],
-'cy_GB.UTF-8'=> [ 'Cymraeg (Welsh)',	'utf_14',   'cy', 'cy:en_GB:en' ],
-  'da'  => [ 'Danish',			'iso-8859-15', 'da', 'da' ],		
-'de_AT' => [ 'German|Austria',		'iso-8859-15','de', 'de_AT:de' ],
-'de_BE' => [ 'German|Belgium',		'iso-8859-15','de', 'de_BE:de' ],
-'de_CH' => [ 'German|Switzerland',	'iso-8859-15', 'de', 'de_CH:de' ],
-'de_DE' => [ 'German|Germany',		'iso-8859-15','de', 'de_DE:de' ],
-  'el'  => [ 'Greek',        'iso-8859-7', 'el', 'el' ],
-'el_GR.UTF-8'=> [ 'Greek (UTF-8)',        'utf_el',     'el', 'el' ],
-  'eo'  => [ 'Esperanto',		'utf_3',      'eo', 'eo' ],
-'es_AR' => [ 'Spanish|Argentina',	'iso-8859-1', 'es', 'es_AR:es_UY:es:es_ES' ],
-'es_ES' => [ 'Spanish|Spain (modern sorting)',	'iso-8859-15', 'es', 'es_ES:es' ],
-'es@tradicional' => [ 'Spanish|Spain (traditional sorting)', 'iso-8859-15', 'es', 'es' ],
-'es_ES.UTF-8'=> [ 'Spanish|Spain (UTF-8)','utf_15', 'es', 'es_ES:es' ],
-'es_MX' => [ 'Spanish|Mexico',	'iso-8859-1', 'es', 'es_MX:es:es_ES' ],
-  'et'  => [ 'Estonian',		'iso-8859-15','et', 'et' ],
-'eu_ES' => [ 'Euskara (Basque)','iso-8859-15', 'eu', 'eu' ],
-'fa_IR.UTF-8'=> [ 'Farsi (Iranian)',		'utf_fa', 'fa', 'fa' ],
-'fi_FI' => [ 'Finnish (Suomi)',	'iso-8859-15','fi', 'fi' ],
-#-'fo'  => [ 'Faroese',			'iso-8859-1', 'fo', 'fo' ],
-'fr_BE' => [ 'French|Belgium',	'iso-8859-15','fr', 'fr_BE:fr' ],
-'fr_CA' => [ 'French|Canada',		'iso-8859-15','fr', 'fr_CA:fr' ],
-'fr_CH' => [ 'French|Switzerland',	'iso-8859-15', 'fr', 'fr_CH:fr' ],
-'fr_FR' => [ 'French|France',	'iso-8859-15','fr', 'fr_FR:fr' ],
-'fr_FR.UTF-8'=> [ 'French|France (UTF-8)','utf_15','fr', 'fr_FR:fr' ],
-'ga_IE' => [ 'Gaeilge (Irish)',	'iso-8859-15','ga', 'ga:en_IE:en' ],
-#-'gd'  => [ 'Scottish gaelic',		'iso-8859-14','gd', 'gd:en_GB:en' ],
-'gl_ES' => [ 'Galego (Galician)','iso-8859-15','gl', 'gl:es_ES:pt_PT:pt_BR:es:pt' ],
-#-'gv'	=> [ 'Manx gaelic',		'iso-8859-14','gv', 'gv:en_GB:en' ],
-#- 'iw' was the old code for hebrew language
-#  'he'  => [ 'Hebrew',	'iso-8859-8', 'he', 'he:iw_IL' ],
-'he_IL.UTF-8'=> [ 'Hebrew',		'utf_he',     'he', 'he:iw_IL' ],
-  'hr'  => [ 'Croatian',		'iso-8859-2', 'hr', 'hr' ],
-  'hu'  => [ 'Hungarian', 		'iso-8859-2', 'hu', 'hu' ],
-#'hy_AM.ARMSCII-8'=> [ 'Armenian|ARMSCII-8','armscii-8','hy','hy' ],
-'hy_AM.UTF-8'=> [ 'Armenian',     'utf_hy',     'hy', 'hy' ],
-#- 'in' was the old code for indonesian language; by putting LANGUAGE=id:in_ID
-#- we catch the few catalog files still using the wrong code
-  'id'  => [ 'Indonesian',		'iso-8859-1', 'id', 'id:in_ID' ],
-  'is'  => [ 'Icelandic', 		'iso-8859-1', 'is', 'is' ],
-'it_CH' => [ 'Italian|Switzerland',	'iso-8859-15', 'it', 'it_IT:it' ],
-'it_IT' => [ 'Italian|Italy','iso-8859-15','it', 'it_IT:it' ],
-#-'iu'  => [ 'Inuktitut', 		'unicodeIU',  'iu', 'iu' ],
-  'ja'  => [ 'Japanese',		'jisx0208',   'ja', 'ja_JP.ujis:ja' ],
-'ja_JP.UTF-8'=> [ 'Japanese (UTF-8)',	'utf_ja',     'ja', 'ja_JP.ujis:ja' ],
-'ka_GE.UTF-8'=> [ 'Georgian',  		'utf_ka',     'ka', 'ka' ],
-#-'kl'  => [ 'Greenlandic (inuit)',	'iso-8859-1', 'kl', 'kl' ],
-  'ko'  => [ 'Korean',           'ksc5601',    'ko', 'ko' ],
-'ko_KR.UTF-8'=> [ 'Korean (UTF-8)',       'utf_ko',     'ko', 'ko' ],
-#-'kw'	=> [ 'Cornish gaelic',		'iso-8859-14','kw', 'kw:en_GB:en' ],
-#-'lo'  => [ 'Laotian',			'mulelao-1',  'lo', 'lo' ],
-  'lt'  => [ 'Lithuanian',		'iso-8859-13','lt', 'lt' ],
-  'lv'  => [ 'Latvian',			'iso-8859-13','lv', 'lv' ],   
-  'mi'	=> [ 'Maori',			'iso-8859-13','mi', 'mi' ],
-# 'mk'  => [ 'Macedonian (Cyrillic)','iso-8859-5', 'mk', 'mk' ],
-'mk_MK.UTF-8'=> [ 'Macedonian (Cyrillic)','utf_1251',   'mk', 'mk' ],
-  'ms'  => [ 'Malay',			'iso-8859-1', 'ms', 'ms' ],
-# 'mt'  => [ 'Maltese|ISO-8859-3',	'iso-8859-3', 'mt', 'mt' ],
-'mt_MT.UTF-8'=> [ 'Maltese',	'utf_3',      'mt', 'mt' ],
-'nl_BE' => [ 'Dutch|Belgium',	'iso-8859-15', 'nl', 'nl_BE:nl' ],
-'nl_NL' => [ 'Dutch|Netherlands','iso-8859-15', 'nl', 'nl_NL:nl' ],
-# 'nb' is the new locale name in glibc 2.2
-  'no'  => [ 'Norwegian|Bokmaal',	'iso-8859-1', 'no', 'no:nb:nn:no@nynorsk:no_NY' ],
-# no_NY is used by KDE (but not standard); 'nn' is the new locale in glibc 2.2
-  'nn'	=> [ 'Norwegian|Nynorsk',	'iso-8859-1', 'no', 'nn:no@nynorsk:no_NY:no:nb' ],
-#-'oc'  => [ 'Occitan',			'iso-8859-1', 'oc', 'oc:fr_FR' ],
-#-'pd'	=> [ 'Plauttdietsch',		'iso-8859-1', 'pd', 'pd' ],
-#-'ph'  => [ 'Pilipino',		'iso-8859-1', 'ph', 'ph:tl' ],
-  'pl'  => [ 'Polish',			'iso-8859-2', 'pl', 'pl' ],
-#-'pp'	=> [ 'Papiamento',		'iso-8859-1', 'pp', 'pp' ],
-'pt_BR' => [ 'Portuguese|Brazil',	'iso-8859-1', 'pt_BR', 'pt_BR:pt_PT:pt' ],
-'pt_PT' => [ 'Portuguese|Portugal','iso-8859-15','pt', 'pt_PT:pt:pt_BR' ],
-  'ro'  => [ 'Romanian',  		'iso-8859-2', 'ro', 'ro' ],
-'ru_RU.KOI8-R' => [ 'Russian|KOI8-R',	'koi8-r',     'ru', 'ru_RU:ru' ],
-'ru_RU.CP1251' => [ 'Russian|CP1251',	'cp1251',     'ru', 'ru_RU:ru' ],
-'ru_RU.UTF-8' => [ 'Russian|UTF-8',	'utf_1251',   'ru', 'ru_RU:ru' ],
-  'sk'  => [ 'Slovak',    		'iso-8859-2', 'sk', 'sk' ],
-  'sl'  => [ 'Slovenian',		'iso-8859-2', 'sl', 'sl' ],
-#  'sp'  => [ 'Serbian|Cyrillic (ISO-8859-5)','iso-8859-5', 'sp', 'sp:sr' ],
-#'sp_YU.CP1251'=> [ 'Serbian|Cyrillic (CP1251)','cp1251',    'sp', 'sp:sr' ],
-'sp_YU.UTF-8'=> [ 'Serbian|Cyrillic','utf_1251',   'sp', 'sp:sr' ],
-  'sr'  => [ 'Serbian|Latin (ISO-8859-2)','iso-8859-2','sr', 'sr' ],
-'sr_YU.UTF-8'=> [ 'Serbian|Latin (UTF-8)',	'utf_2',      'sr', 'sr' ],
-  'sv'  => [ 'Swedish',			'iso-8859-1', 'sv', 'sv' ],
-# there is no tamil font curently; so set DrakX encoding to utf_1
-# note: most of the gnome translations for tamil are broken (using bad
-# encoding)
-'ta_IN.UTF-8'=> [ 'Tamil',		'utf_1',      'ta', 'ta' ],
-'tg_TJ.UTF-8'=> [ 'Tajik',		'utf_koi',    'tg', 'tg' ],
-  'th'  => [ 'Thai|TIS-620',            'tis620',     'th', 'th' ],
-'th_TH.UTF-8'=> [ 'Thai (UTF-8)',         'utf_th',     'th', 'th' ],
-  'tr'  => [ 'Turkish',	 		'iso-8859-9', 'tr', 'tr' ],
-#-'tt_RU.UTF-8'=> [ 'Tatar',		'koi8-k',  'tt', 'tt' ],
-#-'ur'	=> [ 'Urdu',			'cp1256',     'ur', 'ur' ],  
-'uk_UA' => [ 'Ukrainian|KOI8-U', 	'koi8-u',     'uk', 'uk_UA:uk' ],
-'uk_UA.CP1251'=> [ 'Ukrainian|CP1251',	'cp1251',     'uk', 'uk_UA:uk' ],
-'uk_UA.UTF-8'=> [ 'Ukrainian|UTF-8',	'utf_1251',   'uk', 'uk_UA:uk' ],
-  'uz'  => [ 'Uzbek',			'iso-8859-1', 'uz', 'uz' ],
-#'vi_VN.TCVN'  => [ 'Vietnamese|TCVN',   'tcvn',     'vi', 'vi' ],
-#'vi_VN.VISCII' => [ 'Vietnamese|VISCII','viscii',   'vi', 'vi' ],
-'vi_VN.UTF-8' => [ 'Vietnamese',  'utf_vi',   'vi', 'vi' ],
-  'wa'  => [ 'Walon',     		'iso-8859-15', 'wa', 'wa:fr_BE:fr' ],
-#-'yi'	=> [ 'Yiddish',			'cp1255',     'yi', 'yi' ],
-# NOTE: 'zh' must be in the LANGUAGE list, it is not used for translations
-# themselves but is needed for our selection of locales-xx packages
-# and the language dependent packages resolution
-#'zh_HK.Big5' => [ 'Chinese|Traditional|Hong Kong|Big5', 'Big5', 'zh_TW.Big5', 'zh_TW.Big5:zh_TW:zh_HK:zh' ],
-#'zh_HK.UTF-8' => [ 'Chinese|Traditional|Hong Kong|UTF-8','utf_tw','zh_HK', 'zh_HK:zh_TW.Big5:zh_TW:zh' ],
-'zh_TW.Big5' => [ 'Chinese|Traditional|Big5', 'Big5', 'zh_TW.Big5', 'zh_TW.Big5:zh_TW:zh_HK:zh' ],
-'zh_TW.UTF-8' => [ 'Chinese|Traditional|UTF-8','utf_tw','zh_TW','zh_TW.Big5:zh_TW.big5:zh_TW:zh_HK:zh' ],
-'zh_CN.GB2312' => [ 'Chinese|Simplified|GB2312', 'gb2312', 'zh_CN.GB2312', 'zh_CN.GB2312:zh_CN:zh' ],
-'zh_CN.UTF-8' => [ 'Chinese|Simplified|UTF-8','utf_cn','zh_CN', 'zh_CN.GB2312:zh_CN:zh' ],
-# does this one works? 
-#'zh_CN.GB18030' => [ 'Chinese|Simplified|GB18030','gb2312','zh_CN', 'zh_CN.GB2312:zh_CN:zh' ],
-);
-@languages = map { $_->[0] } group_by2(@languages);
-
-my %xim = (
-  'zh_TW.Big5' => { 
- 	ENC => 'big5',
- 	XIM => 'xcin',
- 	XIM_PROGRAM => 'xcin',
- 	XMODIFIERS => '"@im=xcin"',
- 	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'zh_TW.Big5@chinput' => {
-	ENC => 'big5',
-	XIM => 'Chinput',
-	XIM_PROGRAM => 'chinput',
-	XMODIFIERS => '"@im=Chinput"',
-	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'zh_TW.UTF-8' => {
-	ENC => 'utf8',
-	XIM => 'Chinput',
-	XIM_PROGRAM => 'chinput',
-	XMODIFIERS => '"@im=Chinput"',
-	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'zh_CN.GB2312' => {
-	ENC => 'gb',
-	XIM => 'Chinput',
-	XIM_PROGRAM => 'chinput',
-	XMODIFIERS => '"@im=Chinput"',
-	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'zh_CN.UTF-8' => {
-	ENC => 'utf8',
-	XIM => 'Chinput',
-	XIM_PROGRAM => 'chinput',
-	XMODIFIERS => '"@im=Chinput"',
-	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'ko' => {
-	ENC => 'kr',
-	XIM => 'Ami',
-	# NOTE: there are several possible versions of ami, for the different
-	# desktops (kde, gnome, etc). So XIM_PROGRAM isn't defined; it will
-	# be the xinitrc script, XIM section, that will choose the right one 
-	# XIM_PROGRAM => 'ami',
-	XMODIFIERS => '"@im=Ami"',
-	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'ko_KR.UTF-8' => {
-	ENC => 'utf8',
-	XIM => 'Ami',
-	# NOTE: there are several possible versions of ami, for the different
-	# desktops (kde, gnome, etc). So XIM_PROGRAM isn't defined; it will
-	# be the xinitrc script, XIM section, that will choose the right one 
-	# XIM_PROGRAM => 'ami',
-	XMODIFIERS => '"@im=Ami"',
-	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'ja' => {
-	ENC => 'eucj',
-	XIM => 'kinput2',
-	XIM_PROGRAM => 'kinput2',
-	XMODIFIERS => '"@im=kinput2"',
-  },
-  'ja_JP.UTF-8' => {
-	ENC => 'utf8',
-	XIM => 'kinput2',
-	XIM_PROGRAM => 'kinput2',
-	XMODIFIERS => '"@im=kinput2"',
-  },
-  #�XFree86 has an internal XIM for Thai that enables syntax checking etc.
-  #�'Passthroug' is no check at all, 'BasicCheck' accepts bad sequences
-  #�and convert them to right ones, 'Strict' refuses bad sequences
-  'th' => {
-	XIM_PROGRAM => '/bin/true', # it's an internal module
-	XMODIFIERS => '"@im=BasicCheck"',
-  },
-  #�xvnkb is not an XIM input method; but an input method of another
-  #�kind, only XIM_PROGRAM needs to be defined
-  'vi' => {
-	XIM_PROGRAM => 'xvnkb',
-  },
-  'vi_VN.TCVN' => {
-	XIM_PROGRAM => 'xvnkb',
-  },
-  'vi_VN.VISCII' => {
-	XIM_PROGRAM => 'xvnkb',
-  },
-);
-
-sub std2 { "-*-*-medium-r-normal-*-$_[1]-*-*-*-*-*-$_[0]" }
-sub std_ { std2($_[0], 10), std2($_[0], 10) }
-sub std  { std2($_[0], $_[1] || 10), std2($_[0],  8) }
-
-#- [0]: console font name; [1]: sfm map for console font (if needed)
-#- [2]: acm file for console font;
-#- [3]: iocharset param for mount; [4]: codepage parameter for mount
-#- [5]: X11 fontset (for DrakX)
-my %charsets = (
-  "armscii-8"  => [ "arm8",		"armscii8.uni",	"trivial.trans",
-    undef,	undef, std_("armscii-8") ],
-  "utf_hy"     => [ "arm8",		"armscii8.uni",	"trivial.trans",
-    "utf8",	undef, std_("armscii-8") ],
-#- chinese needs special console driver for text mode
-  "Big5"       => [ undef,		undef,		undef,
-	"big5", "950", "-*-*-*-*-*-*-*-*-*-*-*-*-big5-0" ],
-  "utf_tw"     => [ undef,		undef,		undef,
-	"utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-big5-0" ],
-  "gb2312"     => [ undef,		undef,		undef,
-	"gb2312", "936", "-*-*-*-*-*-*-*-*-*-*-*-*-gb2312.1980-0" ],
-  "utf_cn"     => [ undef,		undef,		undef,
-	"utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-gb2312.1980-0" ],
-  "utf_ka"      => [ "t_geors",		"geors.uni",	"geors_to_geops.trans",
-	"utf8",  undef, "-*-*-*-*-*-*-*-*-*-*-*-*-georgian-academy" ],
-  "C" => [ "lat1-16",	undef,		"iso15",
-	"iso8859-1", "850", sub { std("iso8859-1", @_) } ],
-  "iso-8859-1" => [ "lat1-16",	undef,		"iso1",
-	"iso8859-1", "850", sub { std("iso8859-15", @_) } ],
-  "utf_1"      => [ "lat0-16",	undef,		"iso1",
-	"utf8", undef, sub { std("iso8859-15", @_) } ],
-  "iso-8859-2" => [ "lat2-sun16",	undef,		"iso02",
-	"iso8859-2", "852", sub { std("iso8859-2", @_) } ],
-  "utf_2"      => [ "lat2-sun16",	undef,		"iso02",
-	"utf8", undef, sub { std("iso8859-2", @_) } ],
-  "iso-8859-3" => [ "iso03.f16",	undef,		"iso03",
-	"iso8859-3", undef, std_("iso8859-3") ],
-  "utf_3" => [ "iso03.f16",	undef,		"iso03",
-	"utf8", undef, std_("iso8859-3") ],
-#  "iso-8859-4" => [ "lat4u-16",		undef,		"iso04",
-#	"iso8859-4", "775", std_("iso8859-4") ],
-  "iso-8859-5" => [ "UniCyr_8x16",	undef,	"iso05",
-  	"iso8859-5", "855", sub { std("microsoft-cp1251", @_) } ],
-#-#- arabic needs special console driver for text mode [acon]
-#-#- (and gtk support isn't done yet)
-  "iso-8859-6" => [ "iso06.f16",	"iso06",	"trivial.trans",
-    "iso8859-6", "864", std_("iso8859-6") ],
-  "utf_ar" => [ "iso06.f16",	"iso06",	"trivial.trans",
-    "utf8", "864", std_("iso8859-6") ],
-  "iso-8859-7" => [ "iso07.f16",	undef,	"iso07",
-	"iso8859-7", "869", std_("iso8859-7") ],
-  "utf_el" => [ "iso07.f16",	undef,		"iso07",
-	"utf8", "869", std_("iso8859-7") ],
-#-#- hebrew needs special console driver for text mode [acon]
-#-#- (and gtk support isn't done yet)
-   "iso-8859-8" => [ "iso08.f16",	"iso08",	"trivial.trans",
-#	std_("iso8859-8") ],
-	"iso8859-8", "862", std_("microsoft-cp1255") ],
-  "iso-8859-9" => [ "iso09.f16",	"iso09",	"trivial.trans",
-	"iso8859-9", "857", sub { std("iso8859-9", @_) } ],
-  "iso-8859-13" => [ "tlat7",		"iso13",	"trivial.trans",
-	"iso8859-13", "775", std_("iso8859-13") ],
-  "utf_13" => [ "tlat7",		"iso13",	"trivial.trans",
-	"utf8", "775", std_("iso8859-13") ],
-  "iso-8859-14" => [ "iso14",		undef,		"iso14",
-	"iso8859-14", "850", std_("iso8859-14") ],
-  "utf_14" => [ "iso14",		undef,		"iso14",
-	"utf8", undef, std_("iso8859-14") ],
-  "iso-8859-15" => [ "lat0-16",	undef,		"iso15",
-	"iso8859-15", "850", sub { std("iso8859-15", @_) } ],
-  "utf_15" => [ "lat0-16",	undef,		"iso15",
-	"utf8", undef, sub { std("iso8859-15", @_) } ],
-  "utf_az"      => [ "tiso09e",		"iso09",	"trivial.trans",
-	"utf8", undef, std2("iso8859-9e",10) ],
-#- japanese needs special console driver for text mode [kon2]
-  "jisx0208"   => [ undef,		undef,		"trivial.trans",
-	"euc-jp", "932", "-*-*-*-*-*-*-*-*-*-*-*-*-jisx*.*-0" ],
-  "utf_ja"   => [ undef,		undef,		"trivial.trans",
-	"utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-jisx*.*-0" ],
-  "koi8-r"     => [ "UniCyr_8x16",	undef,		"koi8-r",
-	"koi8-r", "866", sub { std("microsoft-cp1251", @_) } ],
-  "koi8-u"     => [ "UniCyr_8x16",	undef,		"koi8-u",
-	"koi8-u", "866", sub { std("microsoft-cp1251", @_) } ],
-  "utf_koi"     => [ "koi8-k",		"iso01",	"trivial.trans",
-	"utf8", undef, std("koi8-k") ],
-  "cp1251"     => [ "UniCyr_8x16",	undef,		"cp1251",
-	"cp1251", "866", sub { std("microsoft-cp1251", @_) } ],
-  "utf_1251"   => [ "UniCyr_8x16",	undef,		"cp1251",
-	"utf8", undef, sub { std("microsoft-cp1251", @_) } ],
-#- Yiddish needs special console driver for text mode [acon]
-#- (and gtk support isn't done yet)
-#  "cp1255"     => [ "iso08.f16",        "iso08",        "trivial.trans",
-#	"cp1255", "862", std_("microsoft-cp1255") ],
-  "utf_he"     => [ "iso08.f16",        "iso08",        "trivial.trans",
-	"utf8", "862", std_("microsoft-cp1255") ],
-#- Urdu needs special console driver for text mode [acon]
-#- (and gtk support isn't done yet)
-#  "cp1256"     => [ undef,              undef,          "trivial.trans",
-#	undef, "864", std_("microsoft-cp1255") ],
-#- korean needs special console driver for text mode
-  "ksc5601"    => [ undef,		undef,		undef,
-	"euc-kr", "949", "-*-*-*-*-*-*-*-*-*-*-*-*-ksc5601.1987-*" ],
-  "utf_ko"    => [ undef,		undef,		undef,
-	"utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-ksc5601.1987-*" ],
-#- I have no console font for Thai...
-  "tis620"     => [ undef,		undef,		"trivial.trans",
-	"tis-620", "874", std2("tis620.2533-1",12) ],
-  "utf_th"     => [ undef,		undef,		"trivial.trans",
-	"utf8", "874", std2("tis620.2533-1",12) ],
-  "tcvn"       => [ "tcvn8x16",		"tcvn",		"trivial.trans",
-	undef, undef, std2("tcvn-5712", 13), std2("tcvn-5712", 10) ],
-  "viscii"     => [ "viscii10-8x16",	"viscii.uni",	"viscii1.0_to_viscii1.1.trans",
-#-	"-*-*-*-*-*-*-*-*-*-*-*-*-viscii1.1-1" ],
-	undef, undef, std2("tcvn-5712", 13), std2("tcvn-5712", 10) ],
-  "utf_vi"     => [ "tcvn8x16",		"tcvn",		"trivial.trans",
-	"utf8", undef, std2("tcvn-5712", 13), std2("tcvn-5712", 10) ],
-#- Farsi (iranian) needs special console driver for text mode [acon]
-#- (and gtk support isn't done yet)
-#  "isiri-3342" => [ undef,		undef,		"trivial.trans",
-#	undef, undef, "-*-*-*-*-*-*-*-*-*-*-*-*-isiri-3342" ],
-  "utf_fa" => [ undef,			undef,		"trivial.trans",
-	"utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-iso10646-1" ],
-#  "tscii-0" => [ "tamil",		undef,		"trivial.trans",
-#	undef, undef, "-*-*-*-*-*-*-*-*-*-*-*-*-tscii-0" ],
-  "unicode" => [ undef,			undef,		"trivial.trans",
-	"utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-iso10646-1" ],
-);
-
-my %bigfonts = (
-    Big5     => 'taipei16.pcf.gz',
-    gb2312   => 'gb16fs.pcf.gz',
-    jisx0208 => 'k14.pcf.gz',
-    ksc5601  => 'baekmuk_gulim_h_14.pcf.gz',
-    unicode  => 'cu12.pcf.gz',
-);
-
-#- for special cases not handled magically
-my %charset2kde_charset = (
-    gb2312 => 'gb2312.1980-0',
-    jisx0208 => 'jisx0208.1983-0',
-    ksc5601 => 'ksc5601.1987-0',
-    Big5 => 'big5-0',
-    cp1251 => 'microsoft-cp1251',
-    utf8 => 'iso10646-1',
-    tis620 => 'tis620-0',
-);
-
-#- for special cases not handled magically
-my %lang2country = (
-  ar => 'eg',
-  be => 'by',
-  bs => 'bh',
-  cs => 'cz',
-  da => 'dk',
-  el => 'gr',
-  et => 'ee',
-  ko => 'kr',
-  mi => 'nz',
-  ms => 'my',
-  nn => 'no',
-  sl => 'si',
-  sp => 'sr',
-  sv => 'se',
-);
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-
-sub list { 
-    my (%options) = @_;
-    my @l = @languages;
-    if ($options{exclude_non_necessary_utf8}) {
-	my %LANGs_non_utf8 = map { lang2LANG($_) => 1 } grep { !/UTF-8/ } @languages;
-	@l = grep { !/UTF-8/ || !$LANGs_non_utf8{lang2LANG($_)} } @l;
-    }
-    if ($options{exclude_non_installed_langs}) {
-	@l = grep { -e "/usr/share/locale/" . lang2LANG($_) . "/LC_CTYPE" } @l;
-    }
-    @l;
-}
-sub lang2text     { exists $languages{$_[0]} && $languages{$_[0]}[0] }
-sub lang2charset  { exists $languages{$_[0]} && $languages{$_[0]}[1] }
-sub lang2LANG     { exists $languages{$_[0]} && $languages{$_[0]}[2] }
-sub lang2LANGUAGE { exists $languages{$_[0]} && $languages{$_[0]}[3] }
-sub getxim { $xim{$_[0]} }
-
-sub lang2country {
-    my ($lang, $prefix) = @_;
-
-    my $dir = "$prefix/usr/share/locale/l10n";
-    my @countries = grep { -d "$dir/$_" } all($dir);
-    my %countries; @countries{@countries} = ();
-
-    my $valid_country = sub {
-	my ($country) = @_;
-	#- fast & dirty solution to ensure bad entries do not happen
-	exists $countries{$country} && $country;
-    };
-
-    my $country;
-    if ($country ||= $lang2country{$lang}) {
-	return $valid_country->($country) ? $country : 'C';
-    }
-    $country ||= $valid_country->(lc($1)) if $lang =~ /([A-Z]+)/;
-    $country ||= $valid_country->(lc($1)) if lang2LANGUAGE($lang) =~ /([A-Z]+)/;
-    $country ||= $valid_country->(substr($lang, 0, 2));
-    $country ||= first(grep { $valid_country->($_) } map { substr($_, 0, 2) } split(':', lang2LANGUAGE($lang)));
-    $country || 'C';
-}
-
-
-sub country2lang {
-    my ($country, $default) = @_;
-
-    my $uc_country = uc $country;
-    my %country2lang = reverse %lang2country;
-    
-    my ($lang1, $lang2);
-    $lang1 ||= $country2lang{$country};
-    $lang1 ||= first(grep { /^$country/    } list());
-    $lang1 ||= first(grep { /_$uc_country/ } list());
-    $lang2 ||= first(grep { int grep { /^$country/    } split(':', lang2LANGUAGE($_)) } list());
-    $lang2 ||= first(grep { int grep { /_$uc_country/ } split(':', lang2LANGUAGE($_)) } list());
-    ($lang1 =~ /UTF-8/ && $lang2 !~ /UTF-8/ ? $lang2 || $lang1 : $lang1 || $lang2) || $default || 'en_US';
-}
-
-sub lang2kde_lang {
-    my ($lang, $default) = @_;
-
-    #- get it using 
-    #- echo C $(rpm -qp --qf "%{name}\n" /RPMS/kde-i18n-*  | sed 's/kde-i18n-//')
-    my @valid_kde_langs = qw(C af az bg ca cs da de el en_GB eo es et fi fr he hu is it ja ko lt lv mt nl no no_NY pl pt pt_BR ro ru sl sk sr sv ta th tr uk xh zh_CN.GB2312 zh_TW.Big5);
-    my %valid_kde_langs; @valid_kde_langs{@valid_kde_langs} = ();
-
-    my $valid_lang = sub {
-	my ($lang) = @_;
-	#- fast & dirty solution to ensure bad entries do not happen
-	$lang eq 'en' ? 'C' :
-	  exists $valid_kde_langs{$lang} ? $lang :
-	  exists $valid_kde_langs{substr($lang, 0, 2)} ? substr($lang, 0, 2) : '';
-    };
-
-    my $r;
-    $r ||= $valid_lang->(lang2LANG($lang));
-    $r ||= first(grep { $valid_lang->($_) } split(':', lang2LANGUAGE($lang)));
-    $r || $default || 'C';
-}
-
-sub kde_lang2lang {
-    my ($klang, $default) = @_;
-    first(grep { /^$klang/ } list()) || $default || 'en_US';
-}
-
-sub kde_lang_country2lang {
-    my ($klang, $country, $default) = @_;
-    my $uc_country = uc $country;
-    # country is used to precise the lang
-    my @choices = grep { /^$klang/ } list();
-    my @sorted = 
-      @choices == 2 && length $choices[0] !~ /[._]/ && $choices[1] =~ /UTF-8/ ? @choices :
-      map { $_->[0] } sort { $b->[1] <=> $a->[1] } map { [ $_ => /_$uc_country/ ] } @choices;
-    
-    $sorted[0] || $default || 'en_US';
-}
-
-sub charset2kde_charset {
-    my ($charset, $default) = @_;
-    my $iocharset = ($charsets{$charset} || [])->[3];
-
-    my @valid_kde_charsets = qw(big5-0 gb2312.1980-0 iso10646-1 iso8859-1 iso8859-4 iso8859-6 iso8859-8 iso8859-13 iso8859-14 iso8859-15 iso8859-2 iso8859-3 iso8859-5 iso8859-7 iso8859-9 koi8-r koi8-u ksc5601.1987-0 jisx0208.1983-0 microsoft-cp1251 tis620-0);
-    my %valid_kde_charsets; @valid_kde_charsets{@valid_kde_charsets} = ();
-
-    my $valid_charset = sub {
-	my ($charset) = @_;
-	#- fast & dirty solution to ensure bad entries do not happen
-	exists $valid_kde_charsets{$charset} && $charset;
-    };
-
-    my $r;
-    $r ||= $valid_charset->($charset2kde_charset{$charset});
-    $r ||= $valid_charset->($charset2kde_charset{$iocharset});
-    $r ||= $valid_charset->($iocharset);
-    $r || $default || 'iso10646-1';
-}
-
-#- font+size for different charsets; the field [0] is the default,
-#- others are overrridens for fixed(1), toolbar(2), menu(3) and taskbar(4)
-my %charset2kde_font = (
-  'C' => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'iso-8859-1'  => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'iso-8859-2'  => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'iso-8859-9'  => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'iso-8859-15' => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'utf_1'       => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'utf_2'       => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'utf_15'      => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'gb2312' => [ "default-ming,16" ],
-  'jisx0208' => [ "misc-fixed,14", "wadalab-gothic,13" ],
-  'ksc5601' => [ "daewoo-gothic,16" ],
-  'Big5'   => [ "taipei-fixed,16" ],
-  'utf_hy' => [ "clearlyu,17" ],
-  'utf_ka' => [ "clearlyu,17" ],
-  'utf_vi' => [ "misc-fixed,13", "misc-fixed,13", "misc-fixed,10", ],
-  'default' => [ "misc-fixed,13", "misc-fixed,13", "misc-fixed,10", ],
-);
-
-sub charset2kde_font {
-    my ($charset, $type) = @_;
-    my $kdecharset = charset2kde_charset($charset);
-    
-    my $font = $charset2kde_font{$charset} || $charset2kde_font{default};
-    my $r = $font->[$type] || $font->[0];
-
-    #- the format is "font-name,size,5,kdecharset,0,0" I have no idea of the
-    #- meaning of that "5"...
-    "$r,5,$kdecharset,0,0";
-}
-
-sub set { 
-    my ($lang, $translate_for_console) = @_;
-
-    if ($lang && !exists $languages{$lang}) {
-	#- try to find the best lang
-	my ($lang2) = grep { /^\Q$lang/ } list(); #- $lang is not precise enough, choose the first complete
-	my ($lang3) = grep { $lang =~ /^\Q$_/ } list(); #- $lang is too precise, choose the first substring matching
-	log::l("lang::set: fixing $lang with ", $lang2 || $lang3);
-	$lang = $lang2 || $lang3;
-    }
-
-    if ($lang && exists $languages{$lang}) {
-	#- use "packdrake -x" that follow symlinks and expand directory.
-	#- it is necessary as there is a lot of symlinks inside locale.cz2,
-	#- using a compressed cpio archive is nighmare to extract all files.
-	#- reset locale environment variable to avoid any warnings by perl,
-	#- so installation of new locale is done with empty locale ...
-	if (!-e "$ENV{SHARE_PATH}/locale/$lang" && common::usingRamdisk()) {
-	    @ENV{qw(LANG LC_ALL LANGUAGE LINGUAS)} = ();
-
-	    eval { rm_rf("$ENV{SHARE_PATH}/locale") };
-	    eval {
-		require packdrake;
-		my $packer = new packdrake("$ENV{SHARE_PATH}/locale.cz2", quiet => 1);
-		$packer->extract_archive("$ENV{SHARE_PATH}/locale", lang2LANG($lang));
-
-		#- LC_COLLATE and LC_CTYPE are getFile'd (cuz they are big, causing the .cz2 to be *big*)
-		my ($dir) = glob_("$ENV{SHARE_PATH}/locale/*");
-		install_any::getAndSaveFile ("$dir/$_") foreach 'LC_COLLATE', 'LC_CTYPE';
-	    };
-	}
-
-#- set all LC_* variables to a unique locale ("C"), and only redefine
-#- LC_CTYPE (for X11 choosing the fontset) and LANGUAGE (for the po files)
-	$ENV{LC_NUMERIC}		= "C";
-	$ENV{LC_TIME}			= "C";
-	$ENV{LC_COLLATE}		= "C";
-	$ENV{LC_MONETARY}		= "C";
-	$ENV{LC_PAPER}			= "C";
-	$ENV{LC_NAME}			= "C";
-	$ENV{LC_ADDRESS}		= "C";
-	$ENV{LC_TELEPHONE}		= "C";
-	$ENV{LC_MEASUREMENT}	= "C";
-	$ENV{LC_IDENTIFICATION}	= "C";
-
-#- use lang2LANG() to define LC_CTYPE, so DrakX will use a same encoding
-#- for all variations of a same language, eg both 'ru_RU.KOI8-R' and
-#- 'ru_RU.UTF-8' will be handled the same (as 'ru') by DrakX.
-#- that way DrakX only needs a reduced set of locale and fonts support.
-#- of course on the installed system they will be different.
-	$ENV{LC_CTYPE}  = lang2LANG($lang);
-	$ENV{LC_MESSAGES} = lang2LANG($lang);
-	$ENV{LANG}      = lang2LANG($lang);
-
-	if ($translate_for_console && $lang =~ /^(ko|ja|zh|th)/) {
-	    log::l("not translating in console");
-	    $ENV{LANGUAGE}  = 'C';
-	} else {
-	    $ENV{LANGUAGE}  = lang2LANGUAGE($lang);
-	}
-	load_mo();
-    } else {
-	# stick with the default (English) */
-	delete $ENV{LANG};
-	delete $ENV{LC_ALL};
-	delete $ENV{LANGUAGE};
-	delete $ENV{LINGUAS};
-    }
-    $lang;
-}
-
-sub langs {
-    my ($l) = @_;
-    grep { $l->{$_} } keys %$l;
-}
-
-sub langsLANGUAGE {
-    my ($l) = @_;
-    my @l = $l->{all} ? list() : langs($l);
-    uniq(map { split ':', lang2LANGUAGE($_) } @l);
-}
-
-sub pack_langs { 
-    my ($l) = @_; 
-    my $s = $l->{all} ? 'all' : join ':', uniq(map { lang2LANGUAGE($_) } langs($l));
-    $ENV{RPM_INSTALL_LANG} = $s;
-    $s;
-}
-
-sub unpack_langs {
-    my ($s) = @_;
-    my @l = uniq(map { split ':', lang2LANGUAGE($_) } split(':', $s));
-    my @l2 = intersection(\@l, [ keys %languages ]);
-    +{ map { $_ => 1 } @l2 };
-}
-
-sub read {
-    my ($prefix, $user_only) = @_;
-    my ($f1, $f2) = ("$prefix$ENV{HOME}/.i18n", "$prefix/etc/sysconfig/i18n");
-    my %h = getVarsFromSh($user_only && -e $f1 ? $f1 : $f2);
-    my $lang = $h{LC_MESSAGES} || 'en_US';
-    $lang = bestMatchSentence($lang, list()) if !exists $languages{$lang};
-    my $langs = $user_only ? () :
-      cat_("$prefix/etc/rpm/macros") =~ /%_install_langs (.*)/ ? unpack_langs($1) : { $lang => 1 };
-    $lang, $langs;
-}
-
-sub write_langs {
-    my ($prefix, $langs) = @_;
-    my $s = pack_langs($langs);
-    symlink "$prefix/etc/rpm", "/etc/rpm" if $prefix;
-    substInFile { s/%_install_langs.*//; $_ .= "%_install_langs $s\n" if eof && $s } "$prefix/etc/rpm/macros";
-}
-
-sub write { 
-    my ($prefix, $lang, $user_only, $dont_touch_kde_files) = @_;
-
-    $lang or return;
-
-    my $h = {};
-    $h->{$_} = $lang foreach qw(LC_COLLATE LC_CTYPE LC_MESSAGES LC_NUMERIC LC_MONETARY LC_TIME);
-    if ($lang && exists $languages{$lang}) {
-## note: KDE is unable to use the keyboard if LC_* and LANG values differ...
-#	add2hash $h, { LANG => lang2LANG($lang), LANGUAGE => lang2LANGUAGE($lang) };
-	add2hash $h, { LANG => $lang, LANGUAGE => lang2LANGUAGE($lang) };
-
-	my $c = $charsets{lang2charset($lang) || ''};
-	if ($c && !$user_only) {
-	    my $p = "$prefix/usr/lib/kbd";
-	    if ($c->[0]) {
-		eval {
-		    cp_af("$p/consolefonts/$c->[0].psf.gz", "$prefix/etc/sysconfig/console/consolefonts");
-		    add2hash $h, { SYSFONT => $c->[0] };
-		};
-		$@ and log::l("missing console font $c->[0]");
-	    }
-	    if ($c->[1]) {
-		eval {
-		    cp_af(glob_("$p/consoletrans/$c->[1]*"), "$prefix/etc/sysconfig/console/consoletrans");
-		    add2hash $h, { UNIMAP => $c->[1] };
-		};
-		$@ and log::l("missing console unimap file $c->[1]");
-	    }
-	    if ($c->[2]) {
-		eval {
-		    cp_af(glob_("$p/consoletrans/$c->[2]*"), "$prefix/etc/sysconfig/console/consoletrans");
-		    add2hash $h, { SYSFONTACM => $c->[2] };
-		};
-		$@ and log::l("missing console acm file $c->[2]");
-	    }
-
-	}
-	add2hash $h, $xim{$lang};
-    }
-    setVarsInSh($prefix . ($user_only ? "$ENV{HOME}/.i18n" : '/etc/sysconfig/i18n'), $h);
-
-    eval {
-	my $charset = lang2charset($lang);
-	my $confdir = $prefix . ($user_only ? "$ENV{HOME}/.kde" : '/usr') . '/share/config';
-	my ($prev_kde_charset) = cat_("$confdir/kdeglobals") =~ /^Charset=(.*)/mi;
-
-	mkdir_p($confdir);
-
-	update_gnomekderc("$confdir/kdeglobals", Locale => (
-			      Charset => charset2kde_charset($charset),
-			      Country => lang2country($lang, $prefix),
-			      Language => lang2kde_lang($lang),
-			  ));
-
-        if ($prev_kde_charset ne charset2kde_charset($charset)) {
-	    update_gnomekderc("$confdir/kdeglobals", WM => (
-	    		      activeFont => charset2kde_font($charset,0),
-	    		  ));
-	    update_gnomekderc("$confdir/kdeglobals", General => (
-	    		      fixed => charset2kde_font($charset, 1),
-	    		      font => charset2kde_font($charset, 0),
-	    		      menuFont => charset2kde_font($charset, 3),
-	    		      taskbarFont => charset2kde_font($charset, 4),
-	    		      toolBarFont => charset2kde_font($charset, 2),
-	    	          ));
-	    update_gnomekderc("$confdir/konquerorrc", FMSettings => (
-	    		      StandardFont => charset2kde_font($charset, 0),
-	    		  ));
-	    update_gnomekderc("$confdir/kdesktoprc", FMSettings => (
-	    		      StandardFont => charset2kde_font($charset, 0),
-	    		  ));
-	}
-    } if !$dont_touch_kde_files;
-}
-
-sub bindtextdomain() {
-    my $localedir = "$ENV{SHARE_PATH}/locale";
-    $localedir .= "_special" if $::isInstall;
-
-    c::setlocale();
-    c::bindtextdomain('libDrakX', $localedir);
-
-    $localedir;
-}
-
-sub load_mo {
-    my ($lang) = @_;
-
-    my $localedir = bindtextdomain();
-    my $suffix = 'LC_MESSAGES/libDrakX.mo';
-
-    $lang ||= $ENV{LANGUAGE} || $ENV{LC_ALL} || $ENV{LC_MESSAGES} || $ENV{LANG};
-
-    foreach (split ':', $lang) {
-	my $f = "$localedir/$_/$suffix";
-	-s $f and return $_;
-
-	if ($::isInstall && common::usingRamdisk()) {
-	    # cleanup
-	    eval { rm_rf($localedir) };
-	    eval { mkdir_p(dirname("$localedir/$_/$suffix")) };
-	    install_any::getAndSaveFile ("$localedir/$_/$suffix");
-
-	    -s $f and return $_;
-	}
-    }
-    '';
-}
-
-
-
-sub console_font_files {
-    map { -e $_ ? $_ : "$_.gz" }
-      (map { "/usr/lib/kbd/consolefonts/$_.psf" } uniq grep {$_} map { $_->[0] } values %charsets),
-      (map { -e $_ ? $_ : "$_.sfm" } map { "/usr/lib/kbd/consoletrans/$_" } uniq grep {$_} map { $_->[1] } values %charsets),
-      (map { -e $_ ? $_ : "$_.acm" } map { "/usr/lib/kbd/consoletrans/$_" } uniq grep {$_} map { $_->[2] } values %charsets),
-}
-
-sub load_console_font {
-    my ($lang) = @_;
-    my ($f, $u, $m) = @{$charsets{lang2charset($lang)} || []};
-
-    require run_program;
-    run_program::run(if_($ENV{LD_LOADER}, $ENV{LD_LOADER}), 
-		     'consolechars', '-v', '-f', $f || 'lat0-sun16',
-		     if_($u, '-u', $u), if_($m, '-m', $m));
-}
-
-#-sub load_font {
-#-    my ($charset) = @_;
-#-    my $fontFile = "lat0-sun16";
-#-
-#-    if (my $c = $charsets{$charset}) {
-#-	   log::l("loading $charset font");
-#-	   $fontFile = $c->[0];
-#-    }
-#-
-#-    # text mode font
-#-    log::l("loading font $ENV{SHARE_PATH}/consolefonts/$fontFile");
-#-    #c::loadFont("/tmp/$fontFile") or log::l("error in loadFont: one of PIO_FONT PIO_UNIMAPCLR PIO_UNIMAP PIO_UNISCRNMAP failed: $!");
-#-    #print STDERR "\033(K";
-#-
-#-}
-
-sub get_x_fontset {
-    my ($lang, $size) = @_;
-
-    my $charset = lang2charset($lang) or return;
-    my $c = $charsets{$charset} or return;
-    if (my $f = $bigfonts{$charset}) {
-	my $dir = "/usr/X11R6/lib/X11/fonts";
-	if (! -e "$dir/$f" && $::isInstall && common::usingRamdisk()) {
-	    unlink "$dir/$_" foreach values %bigfonts;
-	    install_any::remove_bigseldom_used ();
-	    install_any::getAndSaveFile ("$dir/$f");
-	}
-    }
-    my ($big, $small) = @$c[5..6];
-    ($big, $small) = $big->($size) if ref $big;
-    ($big, $small);
-}
-
-sub fs_options {
-    my ($lang) = @_;
-    my $charset = lang2charset($lang) or return;
-    my $c = $charsets{$charset} or return;
-    my ($iocharset, $codepage) = @$c[3..4];
-    $iocharset, $codepage;
-}
-
-sub charset {
-    my ($lang, $prefix) = @_;
-    my $l = lang2LANG($lang);
-    foreach (cat_("$prefix/usr/X11R6/lib/X11/locale/locale.alias")) {
-	/$l:\s+.*\.(\S+)/ and return $1;
-    }
-    $l =~ /.*\.(\S+)/ and return $1;
-}
-
-
-sub check {
-    $^W = 0;
-    my $ok = 1;
-    my $warn = sub {
-	print STDERR "$_[0]\n";
-    };
-    my $err = sub {
-	&$warn;
-	$ok = 0;
-    };
-    
-    my @wanted_charsets = uniq map { lang2charset($_) } list();
-    $err->("invalid charset $_ ($_ does not exist in \%charsets)") foreach difference2(\@wanted_charsets, [ keys %charsets ]);
-    $err->("invalid charset $_ in \%charset2kde_font ($_ does not exist in \%charsets)") foreach difference2([ keys %charset2kde_font ], [ 'default', keys %charsets ]);
-    $warn->("unused charset $_ (given in \%charsets, but not used in \%languages)") foreach difference2([ keys %charsets ], \@wanted_charsets);
-
-    $warn->("unused entry $_ in \%xim") foreach difference2([ keys %xim ], [ list() ]);
-
-    # consolefonts are checked during build via console_font_files()
-
-    if (my @l = difference2([ 'default', keys %charsets ], [ keys %charset2kde_font ])) {
-	$warn->("no kde font for charset " . join(" ", @l));
-    }
-
-    if (my @l = grep { lang2country($_) eq 'C' } list()) {
-	$warn->("no country for langs " . join(" ", @l));
-    }
-    if (my @l = grep { lang2kde_lang($_, 'err') eq 'err' } list()) {
-	$warn->("no KDE lang for langs " . join(" ", @l));
-    }
-    if (my @l = grep { charset2kde_charset($_, 'err') eq 'err' } keys %charsets) {
-	$warn->("no KDE charset for charsets " . join(" ", @l));
-    }
-    exit($ok ? 0 : 1);
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/list.sparc b/perl-install/list.sparc
deleted file mode 100644
index 448e0b63e..000000000
--- a/perl-install/list.sparc
+++ /dev/null
@@ -1,74 +0,0 @@
-/bin/ash
-/bin/cpio
-/lib/libnss_nis.so.2
-/lib/libnss_files.so.2
-/lib/libnss_dns.so.2
-/lib/libresolv.so.2
-/etc/protocols
-/sbin/fdisk
-/sbin/ifport
-/sbin/insmod
-/sbin/mkraid
-/sbin/rmmod
-/sbin/mkdosfs
-/sbin/mke2fs
-/sbin/raidstart
-/usr/bin/bzip2
-/usr/bin/perl
-/usr/lib/libimlib-png.so
-/usr/lib/gtk/themes/engines/libpixmap.so
-/usr/lib/gtk/themes/engines/libpixmap.la
-/usr/lib/libimlib-png.so
-/usr/lib/perl5/5.00503/AutoLoader.pm
-/usr/lib/perl5/5.00503/Carp.pm
-/usr/lib/perl5/5.00503/Data/Dumper.pm
-/usr/lib/perl5/5.00503/Exporter.pm
-/usr/lib/perl5/5.00503/FileHandle.pm
-/usr/lib/perl5/5.00503/SelectSaver.pm
-/usr/lib/perl5/5.00503/SelfLoader.pm
-/usr/lib/perl5/5.00503/Symbol.pm
-/usr/lib/perl5/5.00503/Time/Local.pm
-/usr/lib/perl5/5.00503/dumpvar.pl
-/usr/lib/perl5/5.00503/sparc-linux/Config.pm
-/usr/lib/perl5/5.00503/sparc-linux/DynaLoader.pm
-/usr/lib/perl5/5.00503/sparc-linux/Fcntl.pm
-/usr/lib/perl5/5.00503/sparc-linux/auto/Fcntl/Fcntl.bs
-/usr/lib/perl5/5.00503/sparc-linux/auto/Fcntl/Fcntl.so
-/usr/lib/perl5/5.00503/sparc-linux/IO/File.pm
-/usr/lib/perl5/5.00503/sparc-linux/IO/Handle.pm
-/usr/lib/perl5/5.00503/sparc-linux/IO/Seekable.pm
-/usr/lib/perl5/5.00503/sparc-linux/IO/Socket.pm
-/usr/lib/perl5/5.00503/sparc-linux/Socket.pm
-/usr/lib/perl5/5.00503/sparc-linux/_h2ph_pre.ph
-/usr/lib/perl5/5.00503/sparc-linux/asm/unistd.ph
-/usr/lib/perl5/5.00503/sparc-linux/asm-sparc/unistd.ph
-/usr/lib/perl5/5.00503/sparc-linux/asm-sparc64/unistd.ph
-/usr/lib/perl5/5.00503/sparc-linux/auto/Data/Dumper/Dumper.bs
-/usr/lib/perl5/5.00503/sparc-linux/auto/Data/Dumper/Dumper.so
-/usr/lib/perl5/5.00503/sparc-linux/auto/IO/IO.so
-/usr/lib/perl5/5.00503/sparc-linux/auto/Socket/Socket.bs
-/usr/lib/perl5/5.00503/sparc-linux/auto/Socket/Socket.so
-/usr/lib/perl5/5.00503/sparc-linux/bits/syscall.ph
-/usr/lib/perl5/5.00503/sparc-linux/sys/syscall.ph
-/usr/lib/perl5/5.00503/sparc-linux/syscall.ph
-/usr/lib/perl5/5.00503/lib.pm
-/usr/lib/perl5/5.00503/overload.pm
-/usr/lib/perl5/5.00503/strict.pm
-/usr/lib/perl5/5.00503/vars.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Gtk.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Gtk/Types.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Cmd.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Config.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/A.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/I.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/dataconn.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Netrc.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/auto/Gtk/Gtk.bs
-/usr/lib/perl5/site_perl/5.005/sparc-linux/auto/Gtk/Gtk.so
-/usr/lib/rpm/rpmrc
-/usr/X11R6/bin/XF86_FBDev
-/usr/X11R6/bin/XF86_Mach64
-/usr/X11R6/bin/Xsun
-/usr/X11R6/bin/xmodmap
-/usr/X11R6/lib/modules/xf86Wacom.so
diff --git a/perl-install/live_install b/perl-install/live_install
deleted file mode 100755
index 937661a7d..000000000
--- a/perl-install/live_install
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh
-
-if [ "$UID" -ne 0 ]; then
-    echo >&2 "you need to be root to start live install"
-    exit 3
-fi
-
-if [ -x ./Mandrake/mdkinst/usr/bin/perl-install/live_install2 ]; then
-    dir=`pwd`/Mandrake/mdkinst
-elif [ -x ../../../../../Mandrake/mdkinst/usr/bin/perl-install/live_install2 ]; then
-    dir=`pwd`/../../..
-else
-    echo >&2 "unable to get a working live system to start, check your working directory"
-    exit 2
-fi
-
-/bin/rm -rf /tmp/image
-/bin/mkdir -m 0700 /tmp/image || exit 1
-/bin/rm -rf /tmp/drakx
-/bin/mkdir -m 0700 /tmp/drakx || exit 2
-
-for i in Mandrake RPMS misc boot images VERSION
-do
-    /bin/ln -sf "$dir/../../$i" "/tmp/image/$i" 
-done
-
-/bin/cp -a "$dir/../../Mandrake/mdkinst" "/tmp/drakx"
-
-if [ -x "/tmp/drakx/mdkinst/usr/bin/perl-install/live_install2" ]; then
-    # get correct fonts for DrakX.
-    if [ -n "$DISPLAY" ]; then
-	xset +fp /tmp/drakx/mdkinst/usr/X11R6/lib/X11/fonts/
-	xset fp rehash
-    fi
-
-    # avoid pollution for environment
-    unset LC_MONETARY LC_CTYPE LC_NUMERIC LC_MESSAGES LC_TIME LC_COLLATE LANGUAGE LANG RPM_INSTALL_LANG
-
-    # start DrakX, do not keep shell script in background else the CD is locked by it!!!
-    cd /tmp/drakx/mdkinst/usr/bin/perl-install
-    exec /usr/bin/perl ./live_install2
-fi
-
-echo >&2 "unable to get a working live system to start, check your working directory"
-exit 2
diff --git a/perl-install/live_install2 b/perl-install/live_install2
deleted file mode 100755
index 58c5e9e83..000000000
--- a/perl-install/live_install2
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/usr/bin/perl
-
-my $dir = `pwd`;
-chomp $dir;
-$dir .= "/../../..";
-
-#- perl version of the install, we use directly the version we found,
-#- this means there SHOULD BE no module compiled for an older version of perl
-#- which will be used by DrakX.
-my ($version, $arch) = (glob "$dir/usr/lib/perl5/*/*/CORE/libperl.so")[0] =~ m|$dir/usr/lib/perl5/([^/]*)/([^/]*)/CORE/libperl.so|;
-
-#- keep it mind the ELF loader to use.
-$ENV{LD_LOADER} = "$dir/lib/ld-linux.so.2";
-
-$ENV{LOCPATH}="$dir/usr/share/locale";
-$ENV{GCONV_PATH}="$dir/usr/lib/gconv";
-$ENV{PERL5LIB} = join ":", map { "$dir/usr/lib/perl5/$_" } ("$version/$arch",
-							    "$version",
-							    "site_perl/$version/$arch",
-							    "site_perl/$version",
-							    "site_perl");
-$ENV{LD_LIBRARY_PATH} = "$dir/usr/bin:$dir/bin:$dir/sbin:$dir/usr/sbin:$dir/usr/X11R6/bin:$dir/lib:$dir/usr/lib:$dir/usr/lib/perl5/$version/$arch/CORE";
-$ENV{PATH} = join(":", map { "$dir/$_" } split ":", "/usr/bin:/bin:/sbin:/usr/sbin:/usr/X11R6/bin") . ":$ENV{PATH}";
-$ENV{SHARE_PATH} = "$dir/usr/share";
-$ENV{RPMRC_FILE} = "$dir/usr/lib/rpm/rpmrc";
-$ENV{GTK_DATA_PREFIX} = "$dir/usr";
-$ENV{GTK_EXE_PREFIX} = "$dir/usr";
-$ENV{GDK_IMLIB_PATH} = "$dir/usr/lib";
-
-system $ENV{LD_LOADER}, "../perl", "-i", "-pe", "s,^(.*macrofiles[^/]*)(.*),\$1$dir/usr/lib/rpm/macros:\$2,", $ENV{RPMRC_FILE};
-system $ENV{LD_LOADER}, "../perl", "./install2", "--live", @ARGV;
-
-#- at this point, unwind above else they will not run correctly (wrong ld-linux.so.2)
-delete $ENV{GTK_EXE_PREFIX};
-delete $ENV{RPMRC_FILE};
-delete $ENV{LOCPATH};
-delete $ENV{SHARE_PATH};
-delete $ENV{PATH};
-delete $ENV{LD_LIBRARY_PATH};
-delete $ENV{PERL5LIB};
-delete $ENV{LD_LOADER};
-
-$ENV{DISPLAY} and system "xset", "-fp", "/tmp/drakx/mdkinst/usr/X11R6/lib/X11/fonts/";
-foreach (qw(misc PEX Speedo Type1 mdk 75dpi 100dpi cyrillic)) {
-    -d "/usr/X11R6/lib/X11/fonts/$_" or next;
-    -e "/usr/X11R6/lib/X11/fonts/$_/fonts.dir" and next;
-    chdir "/usr/X11R6/lib/X11/fonts/$_";
-    system "mkfontdir";
-}
-$ENV{DISPLAY} and system "xset", "fp", "rehash";
-
-system "/bin/rm", "-rf", "/tmp/drakx";
-system "/bin/rm", "-rf", "/tmp/rhimage";
-
-exec "/bin/sync";
diff --git a/perl-install/log.pm b/perl-install/log.pm
deleted file mode 100644
index 649ed30a0..000000000
--- a/perl-install/log.pm
+++ /dev/null
@@ -1,58 +0,0 @@
-package log; # $Id$
-
-use diagnostics;
-use strict;
-use c;
-
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-my $logOpen = 0;
-my $logDebugMessages = 0;
-
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub F() { *LOG }
-
-sub l {
-    $logOpen or openLog();
-    if ($::isStandalone) {
-	c::syslog(c::LOG_WARNING(), join("", @_));
-    } elsif ($::isInstall) {
-	print LOG "* ", @_, "\n";
-	print LOG2 "* ", @_, "\n";
-    } else {
-	print STDERR @_, "\n";
-    }
-}
-sub ld { $logDebugMessages and &l }
-sub w { &l }
-
-sub openLog(;$) {
-    if ($::isInstall) {
-	if ($_[0]) { #- useLocal
-	    open LOG, "> $_[0]";# or die "no log possible :(";
-	} else {
-	    open LOG, "> /dev/tty3";# or die "no log possible :(";
-	}
-	open LOG2, ">> /tmp/ddebug.log";# or die "no log possible :(";
-	select((select(LOG),  $| = 1)[0]);
-	select((select(LOG2), $| = 1)[0]);
-    }
-    exists $ENV{DEBUG} and $logDebugMessages = 1;
-    $logOpen = 1;
-}
-
-sub closeLog() { 
-    if ($::isStandalone) {
-	c::closelog();
-    } else { close LOG; close LOG2; }
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/loopback.pm b/perl-install/loopback.pm
deleted file mode 100644
index 24c519ecb..000000000
--- a/perl-install/loopback.pm
+++ /dev/null
@@ -1,129 +0,0 @@
-package loopback; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::System;
-use common;
-use partition_table qw(:types);
-use fs;
-use fsedit;
-use log;
-
-
-sub carryRootLoopback {
-    my ($part) = @_;
-    $_->{mntpoint} eq '/' and return 1 foreach @{$part->{loopback} || []};
-    0;
-}
-
-sub check_circular_mounts {
-    my ($hd, $part, $all_hds) = @_;
-
-    my $fstab = [ fsedit::get_all_fstab($all_hds), $part ]; # no pb if $part is already in $all_hds
-
-    my $base_mntpoint = $part->{mntpoint};
-    my $check; $check = sub {
-	my ($part, @seen) = @_;
-	push @seen, $part->{mntpoint} || return;
-	@seen > 1 && $part->{mntpoint} eq $base_mntpoint and die _("Circular mounts %s\n", join(", ", @seen));
-	if (my $part = fs::up_mount_point($part->{mntpoint}, $fstab)) {
-	    #- '/' carrier is a special case, it will be mounted first
-	    $check->($part, @seen) if !carryRootLoopback($part);
-	}
-	if (isLoopback($part)) {
-	    $check->($part->{loopback_device}, @seen);
-	}
-    };
-    $check->($part) if !($base_mntpoint eq '/' && isLoopback($part)); #- '/' is a special case, no loop check
-}
-
-sub carryRootCreateSymlink {
-    my ($part, $prefix) = @_;
-
-    carryRootLoopback($part) or return;
-
-    my $mntpoint = "$prefix$part->{mntpoint}";
-    unless (-e $mntpoint) {
-	eval { mkdir_p(dirname($mntpoint)) };
-	#- do non-relative link for install, should be changed to relative link before rebooting
-	symlink "/initrd/loopfs", $mntpoint;
-
-	mkdir_p("/initrd/loopfs/lnx4win/boot");
-	symlink "/initrd/loopfs/lnx4win/boot", "$prefix/boot";
-    }
-    #- indicate kernel to keep initrd
-    mkdir "$prefix/initrd", 0755;
-}
-
-
-sub format_part {
-    my ($part, $prefix) = @_;
-    fs::mount_part($part->{loopback_device}, $prefix);
-    create($part, $prefix);
-    fs::real_format_part($part);
-}
-
-sub create {
-    my ($part, $prefix) = @_;
-    my $f = $part->{device} = "$prefix$part->{loopback_device}{mntpoint}$part->{loopback_file}";
-    return if -e $f;
-
-    eval { mkdir_p(dirname($f)) };
-
-    log::l("creating loopback file $f ($part->{size} sectors)");
-
-    local *F;
-    my $block_size = 128;
-    my $s = "\0" x (512 * $block_size);
-    sysopen F, $f, 2 | c::O_CREAT() or die "failed to create loopback file";
-    for (my $i = 0; $i < $part->{size}; $i += $block_size) {
-	syswrite F, $s or die "failed to create loopback file";
-    }
-}
-
-sub getFree {
-    my ($dir, $part) = @_;
-    my $freespace = $dir ? 
-      2 * (MDK::Common::System::df($dir))[1] : #- df in KiB
-      $part->{size};
-
-    $freespace - sum map { $_->{size} } @{$part->{loopback} || []};
-}
-
-#- returns the size of the loopback file if it already exists
-#- returns -1 is the loopback file can't be used
-sub verifFile {
-    my ($dir, $file, $part) = @_;
-    -e "$dir$file" and return -s "$dir$file";
-
-    $_->{loopback_file} eq $file and return -1 foreach @{$part->{loopback} || []};
-
-    undef;
-}
-
-sub prepare_boot {
-    my ($prefix) = @_;
-    my $r = readlink "$prefix/boot"; 
-    unlink "$prefix/boot"; 
-    mkdir "$prefix/boot", 0755;
-    [$r, $prefix];
-}
-
-sub save_boot {
-    my ($loop_boot, $prefix) = @{$_[0]};
-    
-    $loop_boot or return;
-
-    my @files = glob_("$prefix/boot/*");
-    cp_af(@files, $loop_boot) if @files;
-    rm_rf("$prefix/boot");
-    symlink $loop_boot, "$prefix/boot";
-}
-
-
-1;
-
diff --git a/perl-install/lvm.pm b/perl-install/lvm.pm
deleted file mode 100644
index 327e07fe2..000000000
--- a/perl-install/lvm.pm
+++ /dev/null
@@ -1,124 +0,0 @@
-package lvm; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use modules;
-use fsedit;
-use devices;
-use run_program;
-
-#- for partition_table_xxx emulation
-sub hasExtended { 0 }
-sub adjustStart {}
-sub adjustEnd {}
-sub write {}
-sub cylinder_size { 
-    my ($hd) = @_;
-    $hd->{PE_size};
-}
-
-init();
-
-sub init {
-    eval { modules::load('lvm-mod') };
-    run_program::run('vgscan') if !-e '/etc/lvmtab';
-    run_program::run('vgchange', '-a', 'y');
-}
-
-sub check {
-    my ($in) = @_;
-
-    my $f = '/sbin/pvcreate';
-    -e $f or $in->do_pkgs->install('lvm');
-    -e $f or $in->ask_warn('', "Mandatory package lvm is missing"), return;
-    init();
-    1;
-}
-
-sub get_vg {
-    my ($part) = @_;
-    my $dev = expand_symlinks(devices::make($part->{device}));
-    install_any::check_prog ("pvdisplay") if $::isInstall;
-    (split(':', `pvdisplay -c $dev`))[1];
-}
-
-sub update_size {
-    my ($lvm) = @_;
-    install_any::check_prog ("vgdisplay") if $::isInstall;
-    my @l = split(':', `vgdisplay -c -D $lvm->{LVMname}`);
-    $lvm->{totalsectors} = ($lvm->{PE_size} = $l[12]) * $l[13];
-}
-
-sub get_lvs {
-    my ($lvm) = @_;
-    install_any::check_prog ("vgdisplay") if $::isInstall;
-    my @l = `vgdisplay -v -D $lvm->{LVMname}`;
-    install_any::check_prog ("lvdisplay") if $::isInstall;
-    $lvm->{primary}{normal} = 
-      [
-       map {
-	   my $type = -e "/dev/$_" && fsedit::typeOfPart("/dev/$_");
-	   { device => $_, 
-	     type => $type || 0x83,
-	     size => (split(':', `lvdisplay -D -c /dev/$_`))[6] }
-       } map { m|^LV Name\s+/dev/(\S+)| ? $1 : () } @l
-      ];
-}
-
-sub vg_add {
-    my ($part) = @_;
-    if (my $old_name = get_vg($part)) {
-	run_program::run('vgchange', '-a', 'n', $old_name);
-	run_program::run('vgremove', $old_name);	
-    }
-    my $dev = expand_symlinks(devices::make($part->{device}));
-    run_program::run_or_die('pvcreate', '-y', '-ff', $dev);
-    my $prog = run_program::run('vgdisplay', $part->{lvm}) ? 'vgextend' : 'vgcreate';
-    run_program::run_or_die($prog, $part->{lvm}, $dev);
-}
-
-sub vg_destroy {
-    my ($lvm) = @_;
-
-    is_empty_array_ref($lvm->{primary}{normal}) or die _("Remove the logical volumes first\n");
-    run_program::run('vgchange', '-a', 'n', $lvm->{LVMname});
-    run_program::run_or_die('vgremove', $lvm->{LVMname});
-    foreach (@{$lvm->{disks}}) {
-	delete $_->{lvm};
-	$_->{isFormatted} = 0;
-	$_->{notFormatted} = 1;	
-    }
-}
-
-sub lv_delete {
-    my ($lvm, $lv) = @_;
-
-    run_program::run_or_die('lvremove', '-f', "/dev/$lv->{device}");
-
-    my $list = $lvm->{primary}{normal};
-    @$list = grep { $_ != $lv } @$list;
-}
-
-sub lv_create {
-    my ($lvm, $lv) = @_;
-    my $list = $lvm->{primary}{normal};
-    my $nb = 1 + max(map { basename($_->{device}) } @$list);
-    $lv->{device} = "$lvm->{LVMname}/$nb";
-    run_program::run_or_die('lvcreate', '--size', int($lv->{size} / 2) . 'k', '-n', $nb, $lvm->{LVMname});
-    $lv->{notFormatted} = 1;
-    $lv->{isFormatted} = 0;
-    push @$list, $lv;
-}
-
-sub lv_resize {
-    my ($lv, $oldsize) = @_;
-    run_program::run_or_die($oldsize > $lv->{size} ? ('lvreduce', '-f') : 'lvextend', 
-			    '--size', int($lv->{size} / 2) . 'k', "/dev/$lv->{device}");
-}
-
-1;
diff --git a/perl-install/modparm.pm b/perl-install/modparm.pm
deleted file mode 100644
index 849cc40a1..000000000
--- a/perl-install/modparm.pm
+++ /dev/null
@@ -1,78 +0,0 @@
-package modparm; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use modules;
-
-
-sub parameters {
-  my ($module) = @_;
-
-  my $modinfo = '/sbin/modinfo';
-  -x $modinfo or $modinfo = '/usr/bin/modinfo';
-  -x $modinfo or die _('modinfo is not available');
-
-  if (!$::isStandalone && !$::testing) {
-      modules::extract_modules('/tmp', $module);
-      $module = "/tmp/$module.o";
-  }
-
-  my @parameters;
-  foreach (join_lines(`$modinfo -p $module`)) {
-      chomp;
-      next if /^warning:/;
-      (my $name, $_) = /(\S+)\s+(.*)/s or warn "modparm::get_options_name($module): unknown line\n";
-
-      my $c_types = 'int|string|short|byte|char|long';
-      my ($is_a_number, $description, $min, $max) = (0, '', 1, 1);
-      if (/^($c_types) array \(min = (\d+), max = (\d+)\),?\s*(.*)/s) {
-	  $_ = $4;
-	  #- seems like "char" are buggy entries
-	  ($is_a_number, $min, $max) = ($1 ne 'string', $2, $3) if $1 ne 'char'; 
-      } elsif (/^($c_types),?\s*(.*)/s) {
-	  $_ = $2;
-	  #- here "char" really are size-limited strings, modinfo doesn't display the size limit (but since we don't care about it, it doesn't matter :)
-	  $is_a_number = $1 ne 'string' if $1 ne 'char';
-      } else {
-	  #- for things like "no format character" or "unknown format character"
-      }
-      if (/^description "(.*)",?\s*/s) {
-	  ($description, $_) = ($1, $2);
-      }
-      #- print "STILL HAVE ($_)\n" if $_;
-
-      my $format =
-	$min == 1 && $max == 1 ?
-	  ($is_a_number ? _("a number") : '') :
-	$min == $max ? 
-	  ($is_a_number ? _("%d comma separated numbers", $min) : _("%d comma separated strings", $min)) :
-	$min == 1 ?
-	  ($is_a_number ? _("comma separated numbers") : _("comma separated strings")) :
-        ''; #- to weird and buggy, do not display it
-
-      push @parameters, [ $format ? "$name ($format)" : $name, $description ];
-  }
-  @parameters;
-}
-
-
-sub join_lines {
-    my @l;
-    my $s;
-    foreach (@_) {
-	if (/^\s/) {
-	    $s .= $_;
-	} else {
-	    push @l, $s if $s;
-	    $s = $_;
-	}
-    }
-    @l, if_($s, $s);
-}
-
-1;
diff --git a/perl-install/modules.pm b/perl-install/modules.pm
deleted file mode 100644
index de06013db..000000000
--- a/perl-install/modules.pm
+++ /dev/null
@@ -1,398 +0,0 @@
-package modules; # $Id$
-
-use strict;
-
-use common;
-use detect_devices;
-use run_program;
-use log;
-use list_modules;
-
-my %conf;
-
-sub category2modules_and_description {
-    my ($categories) = @_;
-    my $f = '/lib/modules/' . c::kernel_version() . '/modules.description';
-    -e $f or $f = '/lib/modules.description';
-    my %modules_descriptions = map { /(\S+)\s+(.*)/ } cat_($f);
-    map { $_ => $modules_descriptions{$_} } category2modules($categories);
-}
-
-#-###############################################################################
-#- module loading
-#-###############################################################################
-# handles dependencies
-# eg: load('vfat', 'reiserfs', [ ne2k => 'io=0xXXX', 'dma=5' ])
-sub load {
-    #- keeping the order of modules
-    my %options;
-    my @l = map {
-	my ($name, @options) = ref $_ ? @$_ : $_;
-	$options{$name} = \@options;
-	dependencies_closure($name);
-    } @_;
-
-    @l = difference2([ uniq(@l) ], [ loaded_modules() ]) or return;
-
-    my $network_module = do {
-	my ($network_modules, $other) = partition { module2category($_) =~ m,network/(main|usb), } @l;
-	if (@$network_modules > 1) {
-	    # do it one by one
-	    load($_) foreach @$network_modules;
-	    load(@$other);
-	    return;
-	}
-	$network_modules->[0];
-    };
-    my @network_devices = $network_module ? detect_devices::getNet() : ();
-
-    if ($::testing) {
-	log::l("i would load module $_ (@{$options{$_}})") foreach @l;
-    } elsif ($::isStandalone || $::live) {
-	run_program::run('/sbin/modprobe', $_, @{$options{$_}}) 
-	  or die "insmod'ing module $_ failed" foreach @l;
-    } else {
-	load_raw(map { [ $_ => $options{$_} ] } @l);
-    }
-    sleep 2 if grep { /^(usb-storage|mousedev|printer)$/ } @l;
-
-    if ($network_module) {
-	add_alias($_, $network_module) foreach difference2([ detect_devices::getNet() ], \@network_devices);
-    }
-    when_load($_, @{$options{$_}}) foreach @l;
-}
-
-sub unload {
-    if ($::testing) {
-	log::l("rmmod $_") foreach @_;
-    } else {
-	run_program::run("rmmod", $_) foreach @_;
-    }
-}
-
-sub load_category {
-    my ($category, $wait_message, $probe_type) = @_;
-
-    #- probe_category returns the PCMCIA cards. It doesn't know they are already
-    #- loaded, so:
-    read_already_loaded();
-
-    my @try_modules = (
-      if_($category =~ /scsi/,
-	  if_(arch() !~ /ppc/, 'imm', 'ppa'),
-	  if_(detect_devices::usbStorage(), 'usb-storage'),
-      ),
-      if_(arch() =~ /ppc/, 
-	  if_($category =~ /scsi/, 'mesh', 'mac53c94'),
-	  if_($category =~ /net/, 'bmac', 'gmac', 'mace'),
-	  if_($category =~ /sound/, 'dmasound_awacs'),
-      ),
-    );
-    grep {
-	$wait_message->($_->{description}, $_->{driver}) if $wait_message;
-	eval { load([ $_->{driver}, $_->{options} ]) };
-	$_->{error} = $@;
-
-	!($@ && $_->{try});
-    } probe_category($category, $probe_type),
-      map {; { driver => $_, description => $_, try => 1 } } @try_modules;
-}
-
-sub probe_category {
-    my ($category, $probe_type) = @_;
-
-    my @modules = category2modules($category);
-
-    grep {
-	if ($category eq 'isdn') {
-	    my $b = $_->{driver} =~ /ISDN:([^,]*),?([^,]*),?(.*)/;
-	    if ($b) {
-		$_->{driver} = $1;
-		$_->{options} = $2;
-		$_->{firmware} = $3;
-		$_->{firmware} =~ s/firmware=//;
-		$_->{driver} eq "hisax" and $_->{options} .= " id=HiSax";
-	    }
-	    $b;
-	} else {
-	    member($_->{driver}, @modules);
-	}
-    } detect_devices::probeall($probe_type);
-}
-
-sub load_ide {
-    eval { load("ide-cd"); }
-}
-
-
-#-###############################################################################
-#- modules.conf functions
-#-###############################################################################
-sub get_alias {
-    my ($alias) = @_;
-    $conf{$alias}{alias};
-}
-sub get_options {
-    my ($name) = @_;
-    $conf{$name}{options};
-}
-sub set_options {
-    my ($name, $new_option) = @_;
-    $conf{$name}{options} = $new_option;
-}
-sub add_alias { 
-    my ($alias, $module) = @_;
-    $module =~ /ignore/ and return;
-    /\Q$alias/ && $conf{$_}{alias} && $conf{$_}{alias} eq $module and return $_ foreach keys %conf;    
-    log::l("adding alias $alias to $module");
-    $conf{$alias}{alias} ||= $module;
-
-    if ($module =~ /^snd-card-/) {
-	$conf{$module}{above} = 'snd-pcm-oss';
-    }
-    $alias;
-}
-sub add_probeall {
-    my ($alias, $module) = @_;
-
-    my $l = $conf{$alias}{probeall} ||= [];
-    push @$l, $module;
-    log::l("setting probeall scsi_hostadapter to @$l");
-}
-
-sub remove_alias($) {
-    my ($name) = @_;
-    foreach (keys %conf) {
-	$conf{$_}{alias} && $conf{$_}{alias} eq $name or next;
-	delete $conf{$_}{alias};
-	return 1;
-    }
-    0;
-}
-
-sub read_conf {
-    my ($file) = @_;
-    my %c;
-
-    foreach (cat_($file)) {
-	next if /^\s*#/;
-	my ($type, $alias, $val) = split(/\s+/, chomp_($_), 3) or next;
-
-	$val = [ split ' ', $val ] if $type eq 'probeall';
-
-	$c{$alias}{$type} = $val;
-    }
-    #- cheating here: not handling aliases of aliases
-    while (my ($k, $v) = each %c) {
-	if (my $a = $v->{alias}) {
-	    local $c{$a}{alias};
-	    delete $v->{probeall};
-	    add2hash($c{$a}, $v);
-	}
-    }
-    #- convert old aliases to new probeall
-    foreach my $name ('scsi_hostadapter', 'usb-interface') {
-	my @old_aliases = 
-	  map { $_->[0] } sort { $a->[1] <=> $b->[1] } 
-	  map { if_(/^$name(\d*)/ && $c{$_}{alias}, [ $_, $1 || 0 ]) } keys %c;
-	foreach my $alias (@old_aliases) {
-	    push @{$c{$name}{probeall} ||= []}, delete $c{$alias}{alias};
-	}
-    }
-
-    \%c;
-}
-
-sub mergein_conf {
-    my ($file) = @_;
-    my $modconfref = read_conf($file);
-    while (my ($key, $value) = each %$modconfref) {
-	$conf{$key}{alias} = $value->{alias} if !exists $conf{$key}{alias};
-	push @{$conf{$key}{probeall} ||= []}, deref($value->{probeall});
-    }
-}
-
-sub write_conf {
-    my ($prefix) = @_;
-
-    my $file = "$prefix/etc/modules.conf";
-    rename "$prefix/etc/conf.modules", $file; #- make the switch to new name if needed
-
-    #- Substitute new aliases in modules.conf (if config has changed)
-    substInFile {
-	my ($type,$alias,$module) = split(/\s+/, chomp_($_), 3);
-	if ($type eq 'post-install' && $alias eq 'supermount') {	    
-	    #- remove the post-install supermount stuff.
-	    $_ = '';
-	} elsif ($type eq 'alias' && $alias =~ /scsi_hostadapter|usb-interface/) {
-	    #- remove old aliases which are replaced by probeall
-	    $_ = '';
-	} elsif (
-	    $conf{$alias}{$type}  &&
-	    $conf{$alias}{$type} ne $module)  {
-	    my $v = join(' ', uniq(deref($conf{$alias}{$type})));
-	    $_ = "$type $alias $v\n";
-	}
-    } $file;
-
-    my $written = read_conf($file);
-
-    local *F;
-    open F, ">> $file" or die("cannot write module config file $file: $!\n");
-    while (my ($mod, $h) = each %conf) {
-	while (my ($type, $v) = each %$h) {
-	    my $v2 = join(' ', uniq(deref($v)));
-	    print F "$type $mod $v2\n" 
-	      if $v2 && !$written->{$mod}{$type};
-	}
-    }
-    my @l = ();
-    push @l, 'scsi_hostadapter' if !is_empty_array_ref($conf{scsi_hostadapter}{probeall});
-    push @l, 'bttv' if grep { $_->{driver} eq 'bttv' } detect_devices::probeall();
-    append_to_etc_modules($prefix, @l);
-}
-
-sub append_to_etc_modules {
-    my ($prefix, @l) = @_;
-    my $l = join '|', map { '^\s*'.$_.'\s*$' } @l;
-    log::l("to put in modules ", join(", ", @l));
-
-    substInFile { 
-	$_ = '' if $l && /$l/;
-	$_ .= join '', map { "$_\n" } @l if eof;
-    } "$prefix/etc/modules";
-}
-
-sub read_stage1_conf {
-    mergein_conf($_[0]);
-}
-
-#-###############################################################################
-#- pcmcia various
-#-###############################################################################
-sub configure_pcmcia {
-    my ($pcic) = @_;
-
-    #- try to setup pcmcia if cardmgr is not running.
-    my $running if 0;
-    return if $running;
-    $running = 1;
-
-    if (c::kernel_version() =~ /^2\.2/) {
-	my $msg = _("PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel.");
-	log::l($msg);
-	return $msg;
-    }
-
-    log::l("i try to configure pcmcia services");
-
-    symlink "/tmp/stage2/$_", $_ foreach "/etc/pcmcia";
-
-    eval {
-	load("pcmcia_core");
-	load($pcic);
-	load("ds");
-    };
-
-    #- run cardmgr in foreground while it is configuring the card.
-    run_program::run("cardmgr", "-f", "-m" ,"/modules");
-    sleep(3);
-    
-    #- make sure to be aware of loaded module by cardmgr.
-    read_already_loaded();
-}
-
-sub write_pcmcia {
-    my ($prefix, $pcmcia) = @_;
-
-    #- should be set after installing the package above otherwise the file will be renamed.
-    setVarsInSh("$prefix/etc/sysconfig/pcmcia", {
-	PCMCIA    => bool2yesno($pcmcia),
-	PCIC      => $pcmcia,
-	PCIC_OPTS => "",
-        CORE_OPTS => "",
-    });
-}
-
-
-#-###############################################################################
-#- internal functions
-#-###############################################################################
-sub loaded_modules { 
-    map { /(\S+)/ } cat_("/proc/modules");
-}
-sub read_already_loaded { 
-    when_load($_) foreach reverse loaded_modules();
-}
-
-sub when_load {
-    my ($name, @options) = @_;
-    my $category = module2category($name);
-
-    if ($category =~ m,disk/(scsi|hardware_raid|usb),) {
-	add_probeall('scsi_hostadapter', $name);
-	eval { load('sd_mod') };
-    }
-    if ($category =~ /sound/) {
-	add_alias('sound-slot-0', $name);
-    }
-    if ($name =~ /^snd-card-/) {
-	load('snd-pcm-oss');
-    }
-    if ($name =~ /usb-[uo]hci/ || $name eq 'ehci-hcd') {
-	add_probeall('usb-interface', $name);
-    }
-    $conf{$name}{options} = join " ", @options if @options;
-}
-
-sub cz_file { 
-    "/lib/modules" . (arch() eq 'sparc64' && "64") . ".cz-" . c::kernel_version();
-}
-
-sub extract_modules {
-    my ($dir, @modules) = @_;
-    my $cz = cz_file();
-    if (!-e $cz) {
-	unlink $_ foreach glob_("/lib/modules*.cz*");
-	require install_any;
-        install_any::getAndSaveFile("Mandrake/mdkinst$cz", $cz) or die "failed to get modules $cz: $!";
-    }
-    eval {
-	require packdrake;
-	my $packer = new packdrake($cz, quiet => 1);
-	$packer->extract_archive($dir, map { "$_.o" } @modules);
-    };
-}
-
-sub load_raw {
-    my @l = @_;
-
-    extract_modules('/tmp', map { $_->[0] } @l);
-    my @failed = grep {
-	my $m = "/tmp/$_->[0].o";
-	if (-e $m && run_program::run(["/usr/bin/insmod_", "insmod"], '2>', '/dev/tty5', $m, @{$_->[1]})) {
-	    unlink $m;
-	    '';
-	} else {
-	    log::l("missing module $_->[0]") if !-e $m;
-	    -e $m;
-	}
-    } @l;
-
-    die "insmod'ing module " . join(", ", map { $_->[0] } @failed) . " failed" if @failed;
-
-    foreach (@l) {
-	if ($_->[0] =~ /usb-[uo]hci/) {
-	    eval {
-		require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs');
-		#- ensure keyboard is working, the kernel must do the job the BIOS was doing
-		sleep 2;
-		load("usbkbd", "keybdev") if detect_devices::usbKeyboards();
-	    }
-	}
-    }
-}
-
-
-
-1;
diff --git a/perl-install/mouse.pm b/perl-install/mouse.pm
deleted file mode 100644
index 1ff8c106b..000000000
--- a/perl-install/mouse.pm
+++ /dev/null
@@ -1,565 +0,0 @@
-package mouse; # $Id$
-
-#use diagnostics;
-#use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use modules;
-use detect_devices;
-use run_program;
-use devices;
-use modules;
-use any;
-use log;
-
-my @mouses_fields = qw(nbuttons MOUSETYPE XMOUSETYPE name);
-
-my %mice = 
- arch() =~ /^sparc/ ? 
-(
- 'sunmouse' =>
- [ [ 'sunmouse' ],
-   [ [ 3, 'sun', 'sun', __("Sun - Mouse") ]
-   ]]
-) :
-(
- 'PS/2' => 
- [ [ 'psaux' ],
-   [ [ 2, 'ps/2', 'PS/2', __("Standard") ],
-     [ 5, 'ps/2', 'MouseManPlusPS/2', __("Logitech MouseMan+") ],
-     [ 5, 'imps2', 'IMPS/2', __("Generic PS2 Wheel Mouse") ],
-     [ 5, 'ps/2', 'GlidePointPS/2', __("GlidePoint") ],
-     '',
-     [ 5, 'ps/2', 'ThinkingMousePS/2', __("Kensington Thinking Mouse") ],
-     [ 5, 'netmouse', 'NetMousePS/2', __("Genius NetMouse") ],
-     [ 5, 'netmouse', 'NetScrollPS/2', __("Genius NetScroll") ],
-   ]],
-     
- 'USB' =>
- [ [ 'usbmouse' ],
-   [ if_(arch() eq 'ppc', [ 1, 'ps/2', 'PS/2', __("1 button") ]),
-     [ 2, 'ps/2', 'PS/2', __("Generic 2 Button Mouse") ],
-     [ 3, 'ps/2', 'PS/2', __("Generic") ],
-     [ 5, 'ps/2', 'IMPS/2', __("Wheel") ],
-   ]],
-
- __("serial") =>
- [ [ map { "ttyS$_" } 0..3 ],
-   [ [ 2, 'Microsoft', 'Microsoft', __("Generic 2 Button Mouse") ],
-     [ 3, 'Microsoft', 'Microsoft', __("Generic 3 Button Mouse") ],
-     [ 5, 'ms3', 'IntelliMouse', __("Microsoft IntelliMouse") ],
-     [ 3, 'MouseMan', 'MouseMan', __("Logitech MouseMan") ],
-     [ 2, 'MouseSystems', 'MouseSystems', __("Mouse Systems") ],     
-     '',
-     [ 3, 'logim', 'MouseMan', __("Logitech CC Series") ],
-     [ 5, 'pnp', 'IntelliMouse', __("Logitech MouseMan+/FirstMouse+") ],
-     [ 5, 'ms3', 'IntelliMouse', __("Genius NetMouse") ],
-     [ 2, 'MMSeries', 'MMSeries', __("MM Series") ],
-     [ 2, 'MMHitTab', 'MMHittab', __("MM HitTablet") ],
-     [ 3, 'Logitech', 'Logitech', __("Logitech Mouse (serial, old C7 type)") ],
-     [ 3, 'Microsoft', 'ThinkingMouse', __("Kensington Thinking Mouse") ],
-   ]],
-
- __("busmouse") =>
- [ [ arch() eq 'ppc' ? 'adbmouse' : ('atibm', 'inportbm', 'logibm') ],
-   [ if_(arch() eq 'ppc', [ 1, 'Busmouse', 'BusMouse', __("1 button") ]),
-     [ 2, 'Busmouse', 'BusMouse', __("2 buttons") ],
-     [ 3, 'Busmouse', 'BusMouse', __("3 buttons") ],
-   ]],
-
- __("none") =>
- [ [ 'none' ],
-   [ [ 0, 'none', 'Microsoft', __("No mouse") ],
-   ]],
-);
-
-
-sub xmouse2xId { 
-    #- xmousetypes must be sorted as found in /usr/include/X11/extensions/xf86misc.h
-    #- so that first mean "0", etc
-    my @xmousetypes = (
-		   "Microsoft",
-		   "MouseSystems",
-		   "MMSeries",
-		   "Logitech",
-		   "BusMouse", #MouseMan,
-		   "Logitech",
-		   "PS/2",
-		   "MMHittab",
-		   "GlidePoint",
-		   "IntelliMouse",
-		   "ThinkingMouse",
-		   "IMPS/2",
-		   "ThinkingMousePS/2",
-		   "MouseManPlusPS/2",
-		   "GlidePointPS/2",
-		   "NetMousePS/2",
-		   "NetScrollPS/2",
-		   "SysMouse",
-		   "Auto",
-		   "AceCad",
-		   "WSMouse",
-		   "USB",
-    );
-    my ($id) = @_;
-    $id = 'BusMouse' if $id eq 'MouseMan';
-    my $i; map_index { $_ eq $id and $i = $::i } @xmousetypes; $i;
-}
-
-my %mouse_btn_keymap = (
-    0   => "NONE",
-    67  => "F9",
-    68  => "F10",
-    87  => "F11",
-    88  => "F12",
-    85  => "F13",
-    89  => "F14",
-    90  => "F15",
-    56  => "L-Option/Alt",
-    125 => "L-Command",
-    98  => "Num: /",
-    55  => "Num: *",
-    117 => "Num: =",
-);
-sub ppc_one_button_keys { keys %mouse_btn_keymap }
-sub ppc_one_button_key2text { $mouse_btn_keymap{$_[0]} }
-
-sub raw2mouse {
-    my ($type, $raw) = @_;
-    $raw or return;
-
-    my %l; @l{@mouses_fields} = @$raw;
-    +{ %l, type => $type };
-}
-
-sub update_type_name {
-    my ($mouse) = @_;
-    while (my ($k, $v) = each %mice) {
-	$mouse->{device} =~ /usb/ && $k ne 'USB' and next; #- avoid mixing USB and PS/2 mice.
-	foreach (@{$v->[1]}) {
-	    if ($_->[0] == $mouse->{nbuttons} && $_->[2] eq $mouse->{XMOUSETYPE}) {
-		add2hash($mouse, { MOUSETYPE => $_->[1],
-				   type      => $k,
-				   name      => $_->[3],
-				 });
-		return $mouse;
-	    }
-	}
-    }
-}
-
-sub fullnames { 
-    map_each { 
-	my $type = $::a;
-	grep {$_} map {
-	    if ($_) {
-		my $l = raw2mouse($type, $_);
-		"$type|$l->{name}";
-	    } else { 
-		$type .= "|[" . _("Other") . "]";
-		'';
-	    }
-	} @{$::b->[1]}
-    } %mice;
-}
-
-sub fullname2mouse {
-    my ($fname, %opts) = @_;
-    my ($type, @l) = split '\|', $fname;
-    my ($name) = pop @l;
-  search:
-    $opts{device} ||= $mice{$type}[0][0];
-    foreach (@{$mice{$type}[1]}) {
-	my $l = raw2mouse($type, $_);
-	$name eq $l->{name} and return { %$l, %opts };
-    }
-    if ($name eq '1 Button') {
-	$name = "Generic 2 Button Mouse";
-	goto search;
-    }
-    die "$fname not found ($type, $name)";
-}
-
-sub serial_ports() { map { "ttyS$_" } 0..7 }
-sub serial_port2text {
-    $_[0] =~ /ttyS(\d+)/ ? "$_[0] / COM" . ($1 + 1) : $_[0];
-}
-
-sub read {
-    my ($prefix) = @_;
-    my %mouse = getVarsFromSh "$prefix/etc/sysconfig/mouse";
-    eval { add2hash_(\%mouse, fullname2mouse($mouse{FULLNAME})) };
-    $mouse{device} = readlink "$prefix/dev/mouse" or log::l("reading $prefix/dev/mouse symlink failed");
-    $mouse{nbuttons} = $mouse{XEMU3} eq "yes" ? 2 : $mouse{WHEEL} eq "yes" ? 5 : 3;
-    \%mouse;
-}
-
-sub write {
-    my ($prefix, $mouse) = @_;
-    local $mouse->{FULLNAME} = qq("$mouse->{type}|$mouse->{name}"); #-"
-    local $mouse->{XEMU3} = bool2yesno($mouse->{nbuttons} < 3);
-    local $mouse->{WHEEL} = bool2yesno($mouse->{nbuttons} > 3);
-    setVarsInSh("$prefix/etc/sysconfig/mouse", $mouse, qw(MOUSETYPE XMOUSETYPE FULLNAME XEMU3 WHEEL device));
-    any::devfssymlinkf ($mouse->{device}, 'mouse', $prefix) or log::l("creating $prefix/dev/mouse symlink failed");
-    $mouse->{auxmouse} and any::devfssymlinkf ($mouse->{auxmouse}{device}, 'mouse1', $prefix) or log::l("creating $prefix/dev/mouse1 symlink failed");
-
-    if (arch() =~ /ppc/) {
-	my $s = join('',
-	  "dev.mac_hid.mouse_button_emulation = " . to_bool($mouse->{button2_key} || $mouse->{button3_key}) . "\n",
-	  if_($mouse->{button2_key}, "dev.mac_hid.mouse_button2_keycode = $mouse->{button2_key}\n"),
-	  if_($mouse->{button3_key}, "dev.mac_hid.mouse_button3_keycode = $mouse->{button3_key}\n"),
-	);
-	substInFile { 
-	    $_ = '' if /^\Qdev.mac_hid.mouse_button/;
-	    $_ .= $s if eof;
-	} "$prefix/etc/sysctl.conf";
-	#- hack - dev RPM symlinks to mouse0 - lands on mouse1 with new input layer on PPC input/mice will get both ADB and USB
-	symlinkf "/dev/input/mice", "$prefix/dev/usbmouse" if ($mouse->{device} eq "usbmouse");    
-    }
-}
-
-sub mouseconfig {
-    my ($t, $mouse, @wacom);
-
-    #- Whouah! probing all devices from ttyS0 to ttyS3 once a time!
-    detect_devices::probeSerialDevices();
-
-    #- check new probing methods keep everything used here intact!
-    foreach (0..3) {
-	$t = detect_devices::probeSerial("/dev/ttyS$_");
-	if ($t->{CLASS} eq 'MOUSE') {
-	    $t->{MFG} ||= $t->{MANUFACTURER};
-
-	    $mouse = fullname2mouse("serial|Microsoft IntelliMouse") if $t->{MFG} eq 'MSH' && $t->{MODEL} eq '0001';
-	    $mouse = fullname2mouse("serial|Logitech MouseMan") if $t->{MFG} eq 'LGI' && $t->{MODEL} =~ /^80/;
-	    $mouse = fullname2mouse("serial|Genius NetMouse") if $t->{MFG} eq 'KYE' && $t->{MODEL} eq '0003';
-
-	    $mouse ||= fullname2mouse("serial|Generic 2 Button Mouse"); #- generic by default.
-	    $mouse->{device} = "ttyS$_";
-	    last;
-	} elsif ($t->{CLASS} eq "PEN" || $t->{MANUFACTURER} eq "WAC") {
-	    push @wacom, "ttyS$_";
-	}
-    }
-    $mouse, @wacom;
-}
-
-sub detect() {
-    if (arch() =~ /^sparc/) {
-	return fullname2mouse("sunmouse|Sun - Mouse");
-    }
-    if (arch() eq "ppc") {
-        return fullname2mouse(detect_devices::hasMousePS2("usbmouse") ? 
-			      "USB|1 button" :
-			      # No need to search for an ADB mouse.  If I did, the PPC kernel would
-			      # find one whether or not I had one installed!  So..  default to it.
-			      "busmouse|1 button");
-    }
-
-    my @wacom;
-    my $fast_mouse_probe = sub {
-	my $auxmouse = detect_devices::hasMousePS2("psaux") && fullname2mouse("PS/2|Standard", unsafe => 1);
-
-	if (modules::get_alias("usb-interface")) {
-	    if (my (@l) = detect_devices::usbMice()) {
-		log::l("found usb mouse $_->{driver} $_->{description} ($_->{type})") foreach @l;
-		eval { modules::load(qw(hid mousedev usbmouse)) };
-		if (!$@ && detect_devices::tryOpen("usbmouse")) {
-		    my $mouse = fullname2mouse($l[0]{driver} =~ /Mouse:(.*)/ ? $1 : "USB|Generic");
-		    $auxmouse and $mouse->{auxmouse} = $auxmouse; #- for laptop, we kept the PS/2 as secondary (symbolic).
-		    return $mouse;
-		}
-		eval { modules::unload(qw(usbmouse mousedev hid)) };
-	    }
-	}
-	$auxmouse;
-    };
-
-    if (modules::get_alias("usb-interface")) {
-	my $keep_mouse;
-	if (my (@l) = detect_devices::usbWacom()) {
-	    log::l("found usb wacom $_->{driver} $_->{description} ($_->{type})") foreach @l;
-	    eval { modules::load("wacom", "evdev"); };
-	    unless ($@) {
-		foreach (0..$#l) {
-		    detect_devices::tryOpen("input/event$_") and $keep_mouse = 1, push @wacom, "input/event$_";
-		}
-	    }
-	    $keep_mouse or eval { modules::unload("evdev", "wacom"); };
-	}
-    }
-
-    #- at this level, not all possible mice are detected so avoid invoking serial_probe
-    #- which takes a while for its probe.
-    if ($::isStandalone) {
-	my $mouse = $fast_mouse_probe->();
-	$mouse and return ($mouse, @wacom);
-    }
-
-    #- probe serial device to make sure a wacom has been detected.
-    eval { modules::load("serial") };
-    my ($r, @serial_wacom) = mouseconfig(); push @wacom, @serial_wacom;
-
-    if (!$::isStandalone) {
-	my $mouse = $fast_mouse_probe->();
-	$r && $mouse and $r->{auxmouse} = $mouse; #- we kept the auxilliary mouse as PS/2.
-	$r and return ($r, @wacom);
-	$mouse and return ($mouse, @wacom);
-    } else {
-	$r and return ($r, @wacom);
-    }
-
-    #- in case only a wacom has been found, assume an inexistant mouse (necessary).
-    @wacom and return { CLASS      => 'MOUSE',
-			nbuttons   => 2,
-			device     => "nothing",
-			MOUSETYPE  => "Microsoft",
-			XMOUSETYPE => "Microsoft"}, @wacom;
-
-    if (!modules::get_alias("usb-interface") && detect_devices::is_a_recent_computer() && $::isInstall && !$::noauto) {
-	#- special case for non detected usb interface on a box with no mouse.
-	#- we *must* find out if there really is no usb, otherwise the box may
-	#- not be accessible via the keyboard (if the keyboard is USB)
-	#- the only way to know this is to make a full pci probe
-	modules::load_category('bus/usb', '', 'unsafe'); 
-	if (my $mouse = $fast_mouse_probe->()) {
-	    return $mouse;
-	}
-    }
-
-    #- defaults to generic serial mouse on ttyS0.
-    #- Oops? using return let return a hash ref, if not using it, it return a list directly :-)
-    return fullname2mouse("serial|Generic 2 Button Mouse", unsafe => 1);
-}
-
-#- write_conf : write the mouse infos into the Xconfig files.
-#- input :
-#-  $mouse : the hashtable containing the informations
-#- $mouse input
-#-  $mouse->{nbuttons} : number of buttons : integer
-#-  $mouse->{device} : device of the mouse : string : ex 'psaux'
-#-  $mouse->{XMOUSETYPE} : type of the mouse for gpm : string : ex 'PS/2'
-#-  $mouse->{type} : type (generic ?) of the mouse : string : ex 'PS/2'
-#-  $mouse->{name} : name of the mouse : string : ex 'Standard'
-#-  $mouse->{MOUSETYPE} : type of the mouse : string : ex "ps/2"
-#-  $mouse->{XEMU3} : emulate 3rd button : string : 'yes' or 'no'
-sub write_conf {
-    my ($mouse) = @_;
-
-    &write('', $mouse);
-    modules::write_conf('') if $mouse->{device} eq "usbmouse" && !$::testing;
-
-    my $f = "/etc/X11/XF86Config";
-    my $g = "/etc/X11/XF86Config-4";
-
-    my $update_mouse = sub {
-	my ($mouse) = @_;
-
-	my ($zaxis, $zaxis_aux) = map { [
-					 $_->{nbuttons} > 3 ? [ "ZAxisMapping", "4 5" ] : (),
-					 $_->{nbuttons} > 5 ? [ "ZAxisMapping", "6 7" ] : (),
-					 $_->{nbuttons} < 3 ? ([ "Emulate3Buttons" ], [ "Emulate3Timeout", "50" ]) : ()
-					] } grep { $_ } ($mouse, $mouse->{auxmouse});
-
-	my ($str_zaxis, $str_zaxis_aux) = map { join('', map { qq(\n    $_->[0]) . ($_->[1] && qq( $_->[1])) } @$_)
-					    } grep { $_ } ($zaxis, $zaxis_aux);
-	my $found_auxmouse = 0;
-	substInFile {
-	    if (/^Section\s+"Pointer"/ .. /^EndSection/) {
-		$_ = '' if /(ZAxisMapping|Emulate3)/; #- remove existing line
-		s|^(\s*Protocol\s+).*|$1"$mouse->{XMOUSETYPE}"|;
-		s|^(\s*Device\s+).*|$1"/dev/$mouse->{device}"$str_zaxis|;
-	    }
-	    if ($mouse->{auxmouse}) {
-		if (/DeviceName\s+"Mouse2"/ .. /^EndSection/) {
-		    $found_auxmouse = 1;
-		    $_ = '' if /(ZAxisMapping|Emulate3|AlwaysCore)/; #- remove existing line
-		    s|^(\s*Protocol\s+).*|$1"$mouse->{auxmouse}{XMOUSETYPE}"|;
-		    s|^(\s*Device\s+).*|$1"/dev/$mouse->{auxmouse}{device}"\n        AlwaysCore$str_zaxis_aux|;
-		}
-	    }
-	} $f if -e $f && !$::testing;
-	substInFile {
-	    if (my $l = /^Section\s+"Pointer"/ .. /^EndSection/) {
-		$l =~ /E/ and $_ .= qq(
-
-Section "XInput"
-    SubSection "Mouse"
-        DeviceName "Mouse2"
-        Protocol   "$mouse->{auxmouse}{XMOUSETYPE}"
-        Device     "/dev/$mouse->{auxmouse}{device}"
-        AlwaysCore$str_zaxis_aux
-    EndSubSection
-EndSection
-);
-	    }
-	} $f if !$found_auxmouse && $mouse->{auxmouse} && -e $f && !$::testing;
-
-	($str_zaxis, $str_zaxis_aux) = map { join('', map { qq(\n    Option "$_->[0]") . ($_->[1] && qq( "$_->[1]")) } @$_)
-					 } grep { $_ } ($zaxis, $zaxis_aux);
-	$found_auxmouse = 0;
-	substInFile {
-	    if (/Identifier\s+"Mouse1"/ .. /^EndSection/) {
-		$_ = '' if /(ZAxisMapping|Emulate3)/; #- remove existing line
-		s|^(\s*Option\s+"Protocol"\s+).*|$1"$mouse->{XMOUSETYPE}"|; #"
-		s|^(\s*Option\s+"Device"\s+).*|$1"/dev/mouse"$str_zaxis|;
-	    }
-	    if ($mouse->{auxmouse}) {
-		if (/Identifier\s+"Mouse2"/ .. /^EndSection/) {
-		    $found_auxmouse = 1;
-		    $_ = '' if /(ZAxisMapping|Emulate3)/; #- remove existing line
-		    s|^(\s*Option\s+"Protocol"\s+).*|$1"$mouse->{auxmouse}{XMOUSETYPE}"|; #"
-		    s|^(\s*Option\s+"Device"\s+).*|$1"/dev/$mouse->{auxmouse}{device}"$str_zaxis_aux|; #"
-		}
-	    }
-	} $g if -e $g && !$::testing;
-	substInFile {
-	    if (my $l = /Identifier\s+"Mouse1"/ .. /^EndSection/) {
-		$l =~ /E/ and $_ .= qq(
-
-Section "InputDevice"
-    Identifier "Mouse2"
-    Option     "Protocol" "$mouse->{auxmouse}{XMOUSETYPE}"
-    Option     "Device"   "/dev/$mouse->{auxmouse}{XMOUSETYPE}"$str_zaxis_aux
-EndSection
-);
-	    }
-	} $g if !$found_auxmouse && $mouse->{auxmouse} && -e $g && !$::testing;
-    };
-    $update_mouse->($mouse);
-}
-
-sub test_mouse_install {
-    my ($mouse) = @_;
-    require my_gtk;
-    my_gtk->import(qw(:wrappers :helpers));
-    my $w = my_gtk->new;
-    my ($width, $height, $offset) = (210, round_up(min(350, $::windowheight - 150), 6), 25);
-    my $darea = new Gtk::DrawingArea;
-    $darea->set_events([ 'button_press_mask', 'button_release_mask' ]);  #$darea must be unrealized.
-    gtkadd($w->{window},
-  	   gtkpack(my $vbox_grab = new Gtk::VBox(0,0),
-		   gtksize(gtkset_usize($darea, $width+1, $height+1), $width+1, $height+1),
-		   my $okcancel = gtkset_sensitive(create_okcancel($w, '', '', "edge"), 1)
-		  ),
-	  );
-    $okcancel->set_uposition(7, $height-43);
-    Gtk->timeout_add(2000, sub { gtkset_sensitive($okcancel, 1); $okcancel->draw(undef); });
-    test_mouse($mouse, $w, $darea, $width, $height);
-    $w->{window}->set_usize(undef, $height+10);
-    $w->sync; # HACK
-    Gtk::Gdk->pointer_grab($darea->window, 1,
-			   [ 'pointer_motion_mask'],
-			   $darea->window, undef ,0);
-    $w->main;
-}
-
-sub test_mouse_standalone {
-    my ($mouse, $hbox) = @_;
-    require my_gtk;
-    my_gtk->import(qw(:wrappers));
-    my ($width, $height, $offset) = (210, round_up(min(350, $::windowheight - 150), 6), 25);
-    my $darea = new Gtk::DrawingArea;
-    $darea->set_events([ 'button_press_mask', 'button_release_mask' ]);  #$darea must be unrealized.
-    gtkpack($hbox,
-	    gtkpack(gtkset_border_width(new Gtk::VBox(0,10), 10),
-		    gtksize(gtkset_usize($darea, $width+1, $height+1), $width, $height)
-		   )
-	   );
-    test_mouse($mouse, $hbox, $darea, $width, $height);
-}
-
-sub test_mouse {
-    my ($mouse, $w, $darea, $width, $height) = @_;
-
-    $darea->realize();
-    my $wait = 0;
-    my ($m3_image, $m3_mask) = gtkcreate_xpm('mouse_3b.xpm');
-    my ($m3_imagep, $m3_maskp) = gtkcreate_xpm('mouse_3b+.xpm');
-    my ($m3_left, $m3_left_mask) = gtkcreate_xpm('mouse_left.xpm');
-    my ($m3_right, $m3_right_mask) = gtkcreate_xpm('mouse_right.xpm');
-    my ($m3_middle, $m3_middle_mask) = gtkcreate_xpm('mouse_middle.xpm');
-    my ($aru, $aru_mask) = gtkcreate_xpm('arrow_up.xpm');
-    my ($ard, $ard_mask) = gtkcreate_xpm('arrow_down.xpm');
-    my $image = $m3_image;
-    $mouse->{nbuttons} > 3 and $image = $m3_imagep;
-    my $draw_text = sub {
-  	my ($t, $y) = @_;
-  	my $font = $darea->style->font;
-  	my $w = $font->string_width($t);
-  	$darea->window->draw_string($font, $darea->style->black_gc, ($darea->allocation->[2]-$width)/2 + ($width - $w) / 2, ($darea->allocation->[3]-$height)/2 + $y, $t);
-    };
-    my $drawarea; $drawarea = sub { $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-								 $image, 0, 0,
-								 ($darea->allocation->[2]-$width)/2, ($darea->allocation->[3]-$height)/2,
-								 210, 350);
-				    $draw_text->(_("Please test the mouse"), $height - 120);
-				    $draw_text->(_("To activate the mouse,"), $height - 105) if $mouse->{XMOUSETYPE} eq 'IMPS/2';
-				    $draw_text->(_("MOVE YOUR WHEEL!"), $height - 90) if $mouse->{XMOUSETYPE} eq 'IMPS/2';
-				    return if $::isStandalone;
-				    $darea->window->draw_rectangle($darea->style->bg_gc('normal'), 1, 0, $height-65, $width, $height);
-				};
-
-    my $paintButton = sub {
-	my ($nb, $pressed) = @_;
-	my $x = 60 + $nb*33;
-	$drawarea->();
-	if ($nb == 0) {
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $m3_left, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+31, ($darea->allocation->[3]-$height)/2 + 52,
-					 59, 91);
-	} elsif ($nb == 2) {
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $m3_right, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+117, ($darea->allocation->[3]-$height)/2 + 52,
-					 61, 91);
-	} elsif ($nb == 1) {
-	    if ($mouse->{nbuttons} > 3) {
-		$darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					     $m3_middle, 0, 0,
-					     ($darea->allocation->[2]-$width)/2+98, ($darea->allocation->[3]-$height)/2 + 67,
-					     13, 62);
-	    } else {
-  		$darea->window->draw_arc ( $darea->style->black_gc,
-  					   1, ($darea->allocation->[2]-$width)/2 + $x, ($darea->allocation->[3]-$height)/2 + 90, 20, 25,
-  					   0, 360*64);
-	    }
-	} elsif ($nb == 3) {
-	    $wait=1;
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $aru, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+102, ($darea->allocation->[3]-$height)/2 + 57,
-					 6, 8);
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $m3_middle, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+98, ($darea->allocation->[3]-$height)/2 + 67,
-					 13, 62);
-	    Gtk->timeout_add(200, sub { $wait = 0 });
-	} elsif ($nb == 4) {
-	    $wait=1;
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $ard, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+102, ($darea->allocation->[3]-$height)/2 + 131,
-					 6, 8);
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $m3_middle, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+98, ($darea->allocation->[3]-$height)/2 + 67,
-					 13, 62);
-	    Gtk->timeout_add(200, sub { $wait = 0 });
-	}
-    };
-    $darea->signal_connect(button_press_event => sub {
-  			       my $b = $_[1]{button};
-			       $paintButton->($b - 1);
-  			   });
-    $darea->signal_connect(button_release_event => sub {
-			       while ($wait) { my_gtk::flush() }
-			       $drawarea->()
-  			   });
-    $darea->signal_connect(expose_event => sub { $drawarea->() });
-    $darea->size($width, $height);
-}
diff --git a/perl-install/my_gtk.pm b/perl-install/my_gtk.pm
deleted file mode 100644
index 0c777d519..000000000
--- a/perl-install/my_gtk.pm
+++ /dev/null
@@ -1,1323 +0,0 @@
-package my_gtk; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK $border);
-
-@ISA = qw(Exporter);
-%EXPORT_TAGS = (
-    helpers => [ qw(create_okcancel createScrolledWindow create_menu create_notebook create_packtable create_hbox create_vbox create_adjustment create_box_with_title create_treeitem) ],
-    wrappers => [ qw(gtksignal_connect gtkradio gtkpack gtkpack_ gtkpack__ gtkpack2 gtkpack3 gtkpack2_ gtkpack2__ gtkpowerpack gtkset_editable gtksetstyle gtkset_text gtkcombo_setpopdown_strings gtkset_tip gtkappenditems gtkappend gtkset_shadow_type gtkset_layout gtkset_relief gtkadd gtkput gtktext_insert gtkset_usize gtksize gtkset_justify gtkset_active gtkset_sensitive gtkset_modal gtkset_border_width gtkmove gtkresize gtkshow gtkhide gtkdestroy gtkcolor gtkset_mousecursor gtkset_mousecursor_normal gtkset_mousecursor_wait gtkset_background gtkset_default_fontset gtkctree_children gtkxpm gtkpng create_pix_text get_text_coord fill_tiled gtkicons_labels_widget write_on_pixmap gtkcreate_xpm gtkcreate_png gtkbuttonset) ],
-    ask => [ qw(ask_warn ask_okcancel ask_yesorno ask_from_entry) ],
-);
-$EXPORT_TAGS{all} = [ map { @$_ } values %EXPORT_TAGS ];
-@EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
-
-use Gtk;
-use Gtk::Gdk::ImlibImage;
-use c;
-use log;
-use common;
-
-my $forgetTime = 1000; #- in milli-seconds
-$border = 5;
-
-#-###############################################################################
-#- OO stuff
-#-###############################################################################
-sub new {
-    my ($type, $title, %opts) = @_;
-
-    Gtk->init;
-    Gtk::Gdk::ImlibImage->init;
-    Gtk->set_locale;
-    my $o = bless { %opts }, $type;
-    $o->_create_window($title);
-    while (my $e = shift @tempory::objects) { $e->destroy }
-    foreach (@interactive::objects) {
-	$_->{rwindow}->set_modal(0) if $_->{rwindow}->can('set_modal');
-    }
-    push @interactive::objects, $o if !$opts{no_interactive_objects};
-    $o->{rwindow}->set_position('center_always') if $::isStandalone;
-    $o->{rwindow}->set_modal(1) if $my_gtk::grab || $o->{grab};
-    
-    if ($::isWizard && !$my_gtk::pop_it) {
-	$o->{window} = new Gtk::VBox(0,0);
-	$o->{window}->set_border_width($::Wizard_splash ? 0 : 10);
-	$o->{rwindow} = $o->{window};
-	if (!defined($::WizardWindow)) {
-	    $::WizardWindow = new Gtk::Window;
-	    $::WizardWindow->set_position('center_always');
-	    $::WizardWindow->signal_connect(delete_event => sub { die 'wizcancel'});
-	    $::WizardTable = new Gtk::Table(2, 2, 0);
-	    $::WizardWindow->add($::WizardTable);
-	    my $draw1 = new Gtk::DrawingArea;
-	    $draw1->set_usize(540,100);
-	    my $draw2 = new Gtk::DrawingArea;
-	    $draw2->set_usize(100,300);
-	    my ($im_up, $mask_up) = gtkcreate_png($::Wizard_pix_up || "wiz_default_up.png");
-	    my ($y1, $x1) = $im_up->get_size;
-	    my ($im_left, $mask_left) = gtkcreate_png($::Wizard_pix_left || "wiz_default_left.png");
-	    my ($y2, $x2) = $im_left->get_size;
-	    my $style = $draw1->style->copy();
-	    $style->font(Gtk::Gdk::Font->fontset_load("-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*"));
-	    my $w = $style->font->string_width($::Wizard_title);
-	    $draw1->signal_connect(expose_event => sub {
-				       my $i;
-				       for ($i=0;$i<(540/$y1);$i++) {
-					   $draw1->window->draw_pixmap ($draw1->style->bg_gc('normal'),
-									$im_up, 0, 0, 0, $y1*$i,
-									$x1 , $y1 );
-					   $draw1->window->draw_string(
-								       $style->font,
-								       $draw1->style->white_gc,
-								       140+(380-$w)/2, 62,
-								       ($::Wizard_title) );
-				       }
-				   });
-	    $draw2->signal_connect(expose_event => sub {
-				       my $i;
-				       for ($i=0;$i<(300/$y2);$i++) {
-					   $draw2->window->draw_pixmap ($draw2->style->bg_gc('normal'),
-									$im_left, 0, 0, 0, $y2*$i,
-									$x2 , $y2 );
-				       }
-				   });
-	    $::WizardTable->attach($draw1, 0, 2, 0, 1, 'fill', 'fill', 0, 0);
-	    #- $::WizardTable->attach($draw2, 0, 1, 1, 2, 'fill', 'fill', 0, 0);
-	    $::WizardTable->set_usize(540,400);
-	    $::WizardWindow->show_all;
-	    flush();
-	}
-	$::WizardTable->attach($o->{window}, 0, 2, 1, 2, [-fill, -expand], [-fill, -expand], 0, 0);
-    }
-
-    if ($::isEmbedded && !$my_gtk::pop_it && !eval { $::Plug->child }) {
-	$o->{window} = new Gtk::HBox(0,0);
-	$o->{rwindow} = $o->{window};
-	$::Plug ||= new Gtk::Plug ($::XID);
-	$::Plug->show;
-	flush();
-	$::Plug->add($o->{window});
-    }
-    $::CCPID and kill "USR2", $::CCPID;
-    $o;
-}
-sub main {
-    my ($o, $completed, $canceled) = @_;
-    gtkset_mousecursor_normal();
-    my $timeout = Gtk->timeout_add(1000, sub { gtkset_mousecursor_normal(); 1 });
-    my $b = before_leaving { Gtk->timeout_remove($timeout) };
-    $o->{rwindow}->window->set_events(['key_press_mask', 'key_release_mask', 'exposure_mask']) if $o->{rwindow}->window;
-    $o->show;
-
-    do {
-	local $::setstep = 1;
-	Gtk->main;
-    } while ($o->{retval} ? $completed && !$completed->() : $canceled && !$canceled->());
-    $o->destroy;
-    $o->{retval}
-}
-sub show($) {
-    my ($o) = @_;
-    $o->{window}->show;
-    $o->{rwindow}->show;
-}
-sub destroy($) {
-    my ($o) = @_;
-    $o->{rwindow}->destroy;
-    gtkset_mousecursor_wait();
-    flush();
-}
-sub DESTROY { goto &destroy }
-sub sync {
-    my ($o) = @_;
-    show($o);
-    flush();
-}
-sub flush {
-    Gtk->main_iteration while Gtk->events_pending;
-}
-
-sub gtkshow($)         { $_[0]->show; $_[0] }
-sub gtkhide($)         { $_[0]->hide; $_[0] }
-sub gtkdestroy($)      { $_[0] and $_[0]->destroy }
-sub gtkset_usize($$$)  { $_[0]->set_usize($_[1],$_[2]); $_[0] }
-sub gtksize($$$)       { $_[0]->size($_[1],$_[2]); $_[0] }
-sub gtkset_justify($$) { $_[0]->set_justify($_[1]); $_[0] }
-sub gtkset_active($$)  { $_[0]->set_active($_[1]); $_[0] }
-sub gtkset_modal       { $_[0]->set_modal($_[1]); $_[0] }
-sub gtkset_sensitive   { $_[0]->set_sensitive($_[1]); $_[0] }
-sub gtkset_border_width{ $_[0]->set_border_width($_[1]); $_[0] }
-sub gtkmove { $_[0]->window->move($_[1], $_[2]); $_[0] }
-sub gtkresize { $_[0]->window->resize($_[1], $_[2]); $_[0] }
-
-sub gtksignal_connect($@) {
-    my $w = shift;
-    $w->signal_connect(@_);
-    $w
-}
-
-sub gtkradio {
-    my $def = shift;
-    my $radio;
-    map { $radio = new Gtk::RadioButton($_, $radio ? $radio : ());
-	  $radio->set_active($_ eq $def); $radio } @_;
-}
-
-sub gtkpack_($@) { gtkpowerpack('arg', 1, @_) }
-sub gtkpack($@) { gtkpowerpack(1, 1, @_) }
-sub gtkpack__($@) { gtkpowerpack(0, 1, @_) }
-sub gtkpack2_($@) { gtkpowerpack('arg', 0, @_) }
-sub gtkpack2($@) { gtkpowerpack(1, 0, @_) }
-sub gtkpack2__($@) { gtkpowerpack(0, 0, @_) }
-sub gtkpack3 { gtkpowerpack($a?1:0, 0, @_) }
-
-sub gtkpowerpack {
-    #- Get Default Attributes (if any). 2 syntaxes allowed :
-    #- gtkpowerpack( {expand => 1, fill => 0}, $box...) : the attributes are picked from a specified hash ref
-    #- gtkpowerpack(1,0,1, $box, ...) : the attributes are picked from the non-ref list, in the order (expand, fill, padding, pack_end).
-    my $RefDefaultAttrs;
-    if (ref($_[0]) eq 'HASH') { $RefDefaultAttrs = shift }
-    elsif (!ref($_[0])) {
-	$RefDefaultAttrs = {};
-	foreach ("expand", "fill", "padding", "pack_end") {
-	    !ref($_[0]) ? $RefDefaultAttrs->{$_} = shift : last
-	}
-    }
-    my $box = shift;
-
-    while (@_) {
-	#- Get attributes (if specified). 4 syntaxes allowed (default values are undef ie. false...) :
-	#- gtkpowerpack({defaultattrs}, $box, $widget1, $widget2, ...) : the attrs are picked from the default ones (if they exist)
-	#- gtkpowerpack($box, {fill=>1, expand=>0, ...}, $widget1, ...) : the attributes are picked from a specified hash ref
-	#- gtkpowerpack($box, [1,0,1], $widget1, ...) : the attributes are picked from the array ref : (expand, fill, padding, pack_end).
-	#- gtkpowerpack({attr=>'arg'}, $box, 1, $widget1, 0, $widget2, etc...) : the 'arg' value will tell gtkpowerpack to always read the 
-	#- attr value directly in the arg list (avoiding confusion between value 0 and Gtk::Label("0"). That can simplify some writings but
-	#- this arg(s) MUST then be present...
-	my %attr;
-	my $RefAttrs;
-	ref($_[0]) eq 'HASH' || ref($_[0]) eq 'ARRAY' and $RefAttrs = shift;
-	foreach ("expand", "fill", "padding", "pack_end") {
-	    if ($RefDefaultAttrs->{$_} eq 'arg') {
-		ref ($_[0]) and die "error in packing definition\n";
-		$attr{$_} = shift;
-		ref($RefAttrs) eq 'ARRAY' and shift @$RefAttrs;
-	    } elsif (ref($RefAttrs) eq 'HASH' && defined($RefAttrs->{$_})) {
-		$attr{$_} = $RefAttrs->{$_};
-	    } elsif (ref($RefAttrs) eq 'ARRAY') {
-		$attr{$_} = shift @$RefAttrs;
-	    } elsif (defined($RefDefaultAttrs->{$_})) {
-		$attr{$_} = int $RefDefaultAttrs->{$_};
-	    } else {
-		$attr{$_} = 0;
-	    }
-	}
-	#- Get and pack the widget (create it if necessary when it is a label...)
-	my $widget = ref($_[0]) ? shift : new Gtk::Label(shift);
-	if ($attr{pack_end}) { $box->pack_end($widget, $attr{expand}, $attr{fill}, $attr{padding})}
-	else { $box->pack_start($widget, $attr{expand}, $attr{fill}, $attr{padding}) }
-	$widget->show;
-    }
-    $box
-}
-
-sub gtkset_editable {
-    my ($w, $e) = @_;
-    $w->set_editable($e);
-    $w;
-}
-
-sub gtksetstyle {
-    my ($w, $s) = @_;
-    $w->set_style($s);
-    $w;
-}
-
-sub gtkset_text {
-    my ($w, $s) = @_;
-    $w->set_text($s);
-    $w;
-}
-
-sub gtkcombo_setpopdown_strings ($@) {
-    my $w = shift;
-    $w->set_popdown_strings(@_);
-    $w;
-}
-
-sub gtkappend_text {
-    my ($w, $s) = @_;
-    $w->append_text($s);
-    $w;
-}
-
-sub gtkprepend_text {
-    my ($w, $s) = @_;
-    $w->prepend_text($s);
-    $w;
-}
-
-sub gtkset_tip {
-    my ($tips, $w, $tip) = @_;
-    $tips->set_tip($w, $tip) if $tip;
-    $w;
-}
-
-sub gtkappenditems {
-    my $w = shift;
-    map {gtkshow($_) } @_;
-    $w->append_items(@_);
-    $w
-}
-
-sub gtkappend($@) {
-    my $w = shift;
-    foreach (@_) {
-	my $l = $_;
-	ref $l or $l = new Gtk::Label($l);
-	$w->append($l);
-	$l->show;
-    }
-    $w
-}
-
-sub gtkset_shadow_type {
-    $_[0]->set_shadow_type($_[1]);
-    $_[0];
-}
-
-sub gtkset_layout {
-    $_[0]->set_layout($_[1]);
-    $_[0];
-}
-
-sub gtkset_relief {
-    $_[0]->set_relief($_[1]);
-    $_[0];
-}
-
-sub gtkadd($@) {
-    my $w = shift;
-    foreach (@_) {
-	my $l = $_;
-	ref $l or $l = new Gtk::Label($l);
-	$w->add($l);
-	$l->show;
-    }
-    $w
-}
-sub gtkput {
-    my ($w, $w2, $x, $y) = @_;
-    $w->put($w2, $x, $y);
-    $w2->show;
-    $w
-}
-
-sub gtktext_insert {
-    my ($w, $t) = @_;
-    $w->freeze;
-    $w->backward_delete($w->get_length);
-    $w->insert(undef, undef, undef, $t); 
-    #- DEPRECATED? needs \n otherwise in case of one line text the beginning is not shown (even with the vadj->set_value)
-    $w->set_word_wrap(1);
-#-    $w->vadj->set_value(0);
-    $w->thaw;
-    $w;
-}
-
-sub gtkroot {
-    Gtk->init;
-    Gtk->set_locale;
-    Gtk::Gdk::Window->new_foreign(Gtk::Gdk->ROOT_WINDOW);
-}
-
-sub gtkcolor {
-    my ($r, $g, $b) = @_;
-
-    my $color = bless { red => $r, green => $g, blue => $b }, 'Gtk::Gdk::Color';
-    gtkroot()->get_colormap->color_alloc($color);
-}
-
-sub gtkset_mousecursor {
-    my ($type, $w) = @_;
-    ($w || gtkroot())->set_cursor(Gtk::Gdk::Cursor->new($type));
-}
-sub gtkset_mousecursor_normal { gtkset_mousecursor(68, @_) }
-sub gtkset_mousecursor_wait   { gtkset_mousecursor(150, @_) }
-
-sub gtkset_background {
-    my ($r, $g, $b) = @_;
-
-    my $root = gtkroot();
-    my $gc = Gtk::Gdk::GC->new($root);
-
-    my $color = gtkcolor($r, $g, $b);
-    $gc->set_foreground($color);
-    $root->set_background($color);
-
-    my ($h, $w) = $root->get_size;
-    $root->draw_rectangle($gc, 1, 0, 0, $w, $h);
-}
-
-sub gtkset_default_fontset {
-    my ($fontset) = @_;
-
-    my $style = Gtk::Widget->get_default_style;
-    my $f = Gtk::Gdk::Font->fontset_load($fontset) or die '';
-    $style->font($f);
-    Gtk::Widget->set_default_style($style);
-}
-
-sub gtkctree_children {
-    my ($node) = @_;
-    my @l;
-    $node or return;
-    for (my $p = $node->row->children; $p; $p = $p->row->sibling) {
-	push @l, $p;
-    }
-    @l;
-}
-
-my @icon_paths = ($ENV{SHARE_PATH}, "$ENV{SHARE_PATH}/icons", "$ENV{SHARE_PATH}/libDrakX/pixmaps", "/usr/lib/libDrakX/icons", "pixmaps", 'standalone/icons');
-
-sub add_icon_path { @icon_paths = uniq(@icon_paths, @_) }
-
-sub gtkcreate_xpm {
-    my ($f) = @_;
-    my $rw = gtkroot();
-    $f =~ m|.xpm$| or $f="$f.xpm";
-    if ( $f !~ /\//) { -e "$_/$f" and $f="$_/$f", last foreach @icon_paths }
-    my @l = Gtk::Gdk::Pixmap->create_from_xpm($rw, new Gtk::Style->bg('normal'), $f) or die "gtkcreate_xpm: missing pixmap file $f";
-    @l;
-}
-
-sub gtkcreate_png {
-    my ($f) = shift;
-    $f =~ m|.png$| or $f="$f.png";
-    if ( $f !~ /\//) { -e "$_/$f" and $f="$_/$f", last foreach @icon_paths }
-    my $im = Gtk::Gdk::ImlibImage->load_image($f) or die "gtkcreate_png: missing png file $f";
-    $im->render($im->rgb_width, $im->rgb_height);
-    ($im->move_image(), $im->move_mask);
-}
-
-sub gtkbuttonset {
-    my ($button, $str) = @_;
-    $button->child->destroy;
-    $button->add(gtkshow(new Gtk::Label $str));
-    $button;
-}
-
-sub xpm_d { my $w = shift; Gtk::Gdk::Pixmap->create_from_xpm_d($w->window, undef, @_) }
-sub gtkxpm { new Gtk::Pixmap(gtkcreate_xpm(@_)) }
-sub gtkpng { new Gtk::Pixmap(gtkcreate_png(@_)) }
-
-sub create_pix_text {
-    #ref widget, txt, color_txt, [font], [width], [height], flag1, flag2, [background, backsize x y], centeredx, centeredy, bold
-    my ($w, $text, $color_text, $font, $max_width, $max_height, $can_be_greater, $can_be_smaller, $background, $x_back, $y_back, $centeredx, $centeredy, $bold) = @_;
-    my $color_background;
-    my $backpix;
-    if ($color_text =~ /#(\d+)#(\d+)#(\d+)/) { $color_text = gtkcolor(map{$_*65535/255}($1, $2, $3)) }
-    if (ref($background) eq 'Gtk::Gdk::Color') { $color_background = $background }
-    elsif ($background =~ /#(\d+)#(\d+)#(\d+)/) { $color_background = gtkcolor(map{$_*65535/255}($1, $2, $3)) }
-    elsif (ref($background) eq 'Gtk::Gdk::Pixmap' && $x_back && $y_back) { $backpix = 1 }
-    my $fake_darea = new Gtk::DrawingArea;
-    my $style= $fake_darea->style->copy();
-    if (ref($font) eq 'Gtk::Gdk::Font') {
-	$style->font($font);
-    } else {
-	$font and $style->font(Gtk::Gdk::Font->fontset_load($font));
-    }
-    $fake_darea->set_style($style);
-    my ($width, $height, $lines, $widths, $heights) = get_text_coord (
-        $text, $fake_darea, $max_width, $max_height, $can_be_greater, $can_be_smaller, $centeredx, $centeredy);
-    my $pix = new Gtk::Gdk::Pixmap($w->window, $width, $height);
-
-    if ($backpix) {
-	fill_tiled($w, $pix, $background, $x_back, $y_back, $width, $height);
-    } else {
-	$color_background ||= gtkcolor(65535, 65535, 65535);
-	my $gc_background = new Gtk::Gdk::GC($w->window);
-	$gc_background->set_foreground($color_background);
-	$pix->draw_rectangle($gc_background, 1, 0, 0, $width, $height);
-    }
-    $color_text ||= gtkcolor(0, 0, 0);
-    my $gc_text = new Gtk::Gdk::GC($w->window);
-    $gc_text->set_foreground($color_text);
-    my $i = 0;
-    foreach (@{$lines}) {
-	$pix->draw_string($style->font, $gc_text, ${$widths}[$i], ${$heights}[$i], $_);
-	$bold and $pix->draw_string($style->font, $gc_text, ${$widths}[$i] + 1, ${$heights}[$i], $_);
-	$i++;
-    }
-    ($pix, $width, $height);
-}
-
-sub get_text_coord {
-
-    my ($text, $widget4style, $max_width, $max_height, $can_be_greater, $can_be_smaller, $centeredx, $centeredy, $wrap_char) = @_;
-
-    $wrap_char ||= ' ';
-    my $idx = 0;
-    my $real_width = 0;
-    my $real_height = 0;
-    my @lines;
-    my @widths;
-    my @heights;
-    my $height_elem = $widget4style->style->font->ascent + $widget4style->style->font->descent;
-    $heights[0] = 0;
-    my $max_width2 = $max_width;
-    my $height = $heights[0] = $height_elem;
-    my $width = 0;
-    my $flag = 1;
-    my @t = split($wrap_char, $text);
-    my @t2;
-    if ($::isInstall && $::o->{lang} =~ /ja|zh/) {
-	@t = map { $_ . $wrap_char } @t;
-	$wrap_char = '';
-	foreach (@t) {
-	    my @c = split('');
-	    my $i = 0;
-	    my $el = '';
-	    while (1) {
-		$i >= @c and last;
-		$el .= $c[$i];
-		if (ord($c[$i]) >= 128) { $el .= $c[$i+1]; $i++; push @t2, $el; $el = ''}
-		$i++;
-	    }
-	    $el ne '' and push @t2, $el;
-	}
-    } else {
-	@t2 = @t;
-    }
-    foreach (@t2) {
-	my $l = $widget4style->style->font->string_width($_ . (!$flag ? $wrap_char : ''));
-	if ($width + $l > $max_width2 && !$flag) {
-	    $flag = 1;
-	    $height += $height_elem + 1;
-	    $heights[$idx+1] = $height;
-	    $widths[$idx] = $centeredx && !$can_be_smaller ? (max($max_width2-$width, 0))/2 : 0;
-	    $width = 0;
-	    $idx++;
-	}
-	$lines[$idx] = $flag ? "$_" : $lines[$idx] . $wrap_char . "$_";
-	$width += $l;
-	$flag = 0;
-	$l <= $max_width2 or $max_width2 = $l;
-	$width <= $real_width or $real_width = $width;
-    }
-    $height += $height_elem;
-    $widths[$idx] = $centeredx && !$can_be_smaller ? (max($max_width2-$width, 0))/2 : 0;
-
-    $height < $real_height or $real_height = $height;
-    $width = $max_width;
-    $height = $max_height;
-    $real_width < $max_width && $can_be_smaller and $width = $real_width;
-    $real_width > $max_width && $can_be_greater and $width = $real_width;
-    $real_height < $max_height && $can_be_smaller and $height = $real_height;
-    $real_height > $max_height && $can_be_greater and $height = $real_height;
-    if ($centeredy) {
- 	my $dh = ($height-$real_height)/2 + ($height_elem)/2;
- 	@heights = map { $_ + $dh } @heights;
-    }
-    ($width, $height, \@lines, \@widths, \@heights)
-}
-
-sub fill_tiled {
-    my ($w, $pix, $bitmap, $x_back, $y_back, $width, $height) = @_;
-    my ($x2, $y2) = (0, 0);
-    while (1) {
-	$x2 = 0;
-	while (1) {
-	    $pix->draw_pixmap($w->style->bg_gc('normal'),
-			      $bitmap, 0, 0, $x2, $y2, $x_back, $y_back);
-	    $x2 += $x_back;
-	    $x2 >= $width and last;
-	}
-	$y2 += $y_back;
-	$y2 >= $height and last;
-    }
-}
-
-sub gtkicons_labels_widget {
-    my ($args, $w, $color_text, $widget_for_font, $background, $x_back, $y_back, $x_round,
-	$y_round, $x_back2, $y_back2, $icon_width, $icon_height, $exec_func, $exec_hash) = @_;
-
-    my @tab;
-    my $i = 0;
-    my $cursor_hand = new Gtk::Gdk::Cursor 60;
-    my $cursor_normal = new Gtk::Gdk::Cursor 68;
-    foreach (@$args) {
-	my $label = $_->[0];
-	my $dbl_area;
-	my $darea = new Gtk::DrawingArea;
-        my ($icon, undef) = gtkcreate_png($_->[1]);
-	my ($icon_h, undef) = gtkcreate_png("$_->[1]_highlight");
-	$darea->{state} = 0;
-	$darea->signal_connect(expose_event => sub {
-                  my ($dx, $dy) = ($darea->allocation->[2], $darea->allocation->[3]);
-                  if (!defined($dbl_area) || $darea->{state} != $dbl_area->{state}) {
-		      my $state = $darea->{state};
-                      my ($pix, $width, $height) = create_pix_text($darea, $label, $color_text, $widget_for_font->style->font, $x_round, 1,
-                                                               1, 0, $background, $x_back2, $y_back2, 1, 0, $state);
-                      ($dx, $dy) = (max($width, $x_round), $y_round + $height);
-                      $darea->set_usize($dx, $dy);
-                      $dbl_area = new Gtk::Gdk::Pixmap($darea->window, max($width, $x_round), $y_round + $height);
-		      $dbl_area->{state} = $darea->{state};
-                      fill_tiled($darea, $dbl_area, $background, $x_back2, $y_back2, $dx, $dy);
-                      $dbl_area->draw_pixmap($darea->style->bg_gc('normal'),
-                                             $darea->{state} ? $icon_h : $icon, 0, 0, ($dx - $icon_width)/2, 0, $icon_width, $icon_height);
-                      $dbl_area->draw_pixmap($darea->style->bg_gc('normal'),
-                                             $pix, 0, 0, ($dx - $width)/2, $y_round, $width, $height);
-#                      $dbl_area->draw_rectangle($darea->style->black_gc, 0,
-#						0, 0, max($width, $x_round) - 1 , $y_round + $height - 1);
-                  }
-                  $darea->window->draw_pixmap($darea->style->bg_gc('normal'),
-                                              $dbl_area, 0, 0, 0, 0, $dx, $dy);
-#		  $darea->window->draw_rectangle($darea->style->black_gc, 0,
-#						0, 0, $dx, $dy);
-                  ($darea->{dx}, $darea->{dy}) = ($dx, $dy);
-              });
-	$darea->set_events(['exposure_mask', 'enter_notify_mask', 'leave_notify_mask', 'button_press_mask', 'button_release_mask' ]);
-	$darea->signal_connect( enter_notify_event => sub {
-				    if ($darea->{state} == 0) {
-					$darea->{state} = 1;
-					$darea->draw(undef);
-				    }
-				});
-	$darea->signal_connect( leave_notify_event => sub {
-				    if ($darea->{state} == 1) {
-					$darea->{state} = 0;
-					$darea->draw(undef);
-				    }
-				});
-	my $label_exec = $_->[0];
-	$darea->signal_connect( button_release_event => sub {
-				    $darea->{state} = 0;
-				    $darea->draw(undef);
-				    $exec_func->($exec_hash->{$label_exec});
-#				    $exec_hash->{$label_exec}{function}->($exec_hash->{$label_exec}{arg});
-				});
-	$darea->signal_connect( realize => sub { $darea->window->set_cursor($cursor_hand) });
-	$tab[$i] = $darea;
-	$i++;
-    }
-    my $fixed = new Gtk::Fixed;
-    foreach (@tab) { $fixed->put($_, 75, 65) }
-    my $redraw_function = sub { 
-	$fixed->move(@$_) foreach compute_icons($fixed->allocation->[2], $fixed->allocation->[3], 40, 15, 20, @tab);
-    };
-    $fixed->signal_connect(expose_event => $redraw_function );
-    $fixed->signal_connect(realize => sub {
-			       $fixed->window->set_back_pixmap($background, 0);
-			       $redraw_function->();
-			   });
-    $fixed->{redraw_function} = $redraw_function;
-    $fixed->show_all();
-    my $w_ret = createScrolledWindow($fixed, ['automatic', 'automatic']);
-
-    #- Ugly hacks, don't touch! ########
-    my $timeout2 = Gtk->timeout_add(100, sub { $fixed->set_usize($w_ret->allocation->[2] - 22, 0); 0; });
-    $w_ret->vscrollbar->set_usize(19, undef);
-    gtkset_border_width($w_ret, -2); #- ok, this is very very ugly...
-}
-
-sub ctree_set_icon {
-    my ($tree, $node, $icon_pixmap, $icon_mask) = @_;
-
-    my ($text, $spacing, undef, undef, undef, undef, $isleaf, $expanded) = $tree->get_node_info($node);
-    $tree->set_node_info($node, $text, $spacing, $icon_pixmap, $icon_mask, $icon_pixmap, $icon_mask, $isleaf, $expanded);
-}
-
-sub compute_icons {
-    my ($fx, $fy, $decx, $decy, $interstice, @tab) = @_;
-    my $nb = $#tab;
-    my $nb_sav = $nb;
-    my $index = 0;
-    my @dx2;
-    my @dx;
-    my @dy;
-    my $line_up = 0;
-  bcl_init:
-    @dx2 = undef;
-  bcl:
-    @dx = map{ $_->{dx} } @tab[$index..$index+$nb];
-    $dy[$index] = max(map{ $_->{dy} } @tab[$index..$index+$nb]);
-    foreach (0..$#dx) {
-	if ($dx[$_] > $dx2[$_]) { $dx2[$_] = $dx[$_] } else { $dx[$_] = $dx2[$_] }
-    }
-    my $line_size = 0;
-    $line_size = $decx + sum(@dx2) + $nb * $interstice;
-    if ($line_size > $fx) {
-	$index = 0; $nb--; goto bcl_init;
-    }
-    $nb and $line_up = ($fx-$line_size)/($nb+2);
-    $index += $nb+1;
-    $index <= $#tab and goto bcl;
-    my @ret;
-    my $n = 0;
-    my $y = $decy;
-    my $x = $decx/2 + $line_up;
-    foreach (0..$nb_sav) {
-	$ret[$_] = [$tab[$_], $x, $y];
-	$x += $dx2[$n] + $interstice + $line_up;
-	$n++;
-	if ($n > $nb) {
-	    $n = 0;
-	    $x = $decx/2 + $line_up;
-	    $y += int($dy[$_-$nb]/5)*5 + 15;
-	}
-    }
-    @ret;
-}
-
-sub write_on_pixmap {
-    my ($pixmap, $x_pos, $y_pos, @text)=@_;
-    my ($gdkpixmap, $gdkmask) = $pixmap->get();
-    my ($width, $height) = (440, 250);
-    my $gc = Gtk::Gdk::GC->new(gtkroot());
-    $gc->set_foreground(gtkcolor(8448, 17664, 40191)); #- in hex : 33, 69, 157
-
-    my $darea= new Gtk::DrawingArea();
-    $darea->size($width, $height);
-    $darea->set_usize($width, $height);
-    my $draw = sub {
-	my $style = new Gtk::Style;
-	#- i18n : you can change the font.
-	$style->font(Gtk::Gdk::Font->fontset_load(_("-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*")));
-	my $y_pos2= $y_pos;
-  	foreach (@text) {
-  	    $darea->window->draw_string($style->font, $gc, $x_pos, $y_pos2, $_);
-  	    $y_pos2 += 20;
-  	}
-    };
-    $darea->signal_connect(expose_event => sub { $darea->window->draw_rectangle($darea->style->white_gc, 1, 0, 0, $width, $height);
-						 $darea->window->draw_pixmap
-						   ($darea->style->white_gc,
-						    $gdkpixmap, 0, 0,
-						    ($darea->allocation->[2]-$width)/2, ($darea->allocation->[3]-$height)/2,
-						    $width, $height);
-						 &$draw();
-					     });
-    $darea;
-}
-
-sub n_line_size {
-    my ($nbline, $type, $widget) = @_;
-    my $font = $widget->style->font;
-    my $spacing = ${{ text => 0, various => 17 }}{$type};
-    $nbline * ($font->ascent + $font->descent + $spacing) + 8;
-}
-
-#-###############################################################################
-#- createXXX functions
-
-#- these functions return a widget
-#-###############################################################################
-
-sub create_okcancel {
-    my ($w, $ok, $cancel, $spread, @other) = @_;
-    my $one = ($ok xor $cancel);
-    $spread ||= $::isWizard ? "end" : "spread";
-    $ok ||= $::isWizard ? ($::Wizard_finished ? _("Finish") : _("Next ->")) : _("Ok");
-    $cancel ||= $::isWizard ? _("<- Previous") : _("Cancel");
-    my $b1 = gtksignal_connect($w->{ok} = new Gtk::Button($ok), clicked => $w->{ok_clicked} || sub { $w->{retval} = 1; Gtk->main_quit });
-    my $b2 = !$one && gtksignal_connect($w->{cancel} = new Gtk::Button($cancel), clicked => $w->{cancel_clicked} || sub { log::l("default cancel_clicked"); undef $w->{retval}; Gtk->main_quit });
-    $::isWizard and gtksignal_connect($w->{wizcancel} = new Gtk::Button(_("Cancel")), clicked => sub { die 'wizcancel' });
-    my @l = grep { $_ } $::isWizard ? ($w->{wizcancel}, $::Wizard_no_previous ? () : $b2, $b1): ($b1, $b2);
-    push @l, map { gtksignal_connect(new Gtk::Button($_->[0]), clicked => $_->[1]) } @other;
-
-    $_->can_default($::isWizard) foreach @l;
-    gtkadd(create_hbox($spread), @l);
-}
-
-sub create_box_with_title($@) {
-    my $o = shift;
-
-    my $nbline = sum(map { round(length($_) / 60 + 1/2) } map { split "\n" } @_);
-    $o->{box} = new Gtk::VBox(0,0);
-    $o->{box_size} = n_line_size($nbline, 'text', $o->{box});
-    if (@_ <= 2 && $nbline > 4) {
-	$o->{icon} && !$::isWizard and 
-	  eval { gtkpack__($o->{box}, gtkset_border_width(gtkpack_(new Gtk::HBox(0,0), 1, gtkpng($o->{icon})),5)) };
-	my $wanted = $o->{box_size};
-	$o->{box_size} = min(200, $o->{box_size});
-	my $has_scroll = $o->{box_size} < $wanted;
-
-	my $wtext = new Gtk::Text;
-	$wtext->can_focus($has_scroll);
-	chomp(my $text = join("\n", @_));
-	my $scroll = createScrolledWindow(gtktext_insert($wtext, $text));
-	$scroll->set_usize(400, $o->{box_size});
-	gtkpack__($o->{box}, $scroll);
-    } else {
-	my $a = !$::no_separator;
-	undef $::no_separator;
-	if ($o->{icon} && !$::isWizard) {
-	    gtkpack__($o->{box},
-		      gtkpack_(new Gtk::HBox(0,0),
-			       0, gtkset_usize(new Gtk::VBox(0,0), 15, 0),
-			       0, eval { gtkpng($o->{icon}) },
-			       0, gtkset_usize(new Gtk::VBox(0,0), 15, 0),
-			       1, gtkpack_($o->{box_title} = new Gtk::VBox(0,0),
-					   1, new Gtk::HBox(0,0),
-					   (map {
-					       my $w = ref $_ ? $_ : new Gtk::Label($_);
-					       $::isWizard and $w->set_justify("left");
-					       $w->set_name("Title");
-					       (0, $w);
-					   } map { ref $_ ? $_ : warp_text($_) } @_),
-					   1, new Gtk::HBox(0,0),
-					  )
-			      ),
-		      if_($a, new Gtk::HSeparator)
-		     )
-	} else {
-	    gtkpack__($o->{box},
-		      (map {
-			  my $w = ref $_ ? $_ : new Gtk::Label($_);
-			  $::isWizard and $w->set_justify("left");
-			  $w->set_name("Title");
-			  $w;
-		      } map { ref $_ ? $_ : warp_text($_) } @_),
-		      if_($a, new Gtk::HSeparator)
-		     )
-	}
-    }
-}
-
-sub createScrolledWindow {
-    my ($W, $policy) = @_;
-    my $w = new Gtk::ScrolledWindow(undef, undef);
-    $policy ||= [ 'automatic', 'automatic'];
-    $w->set_policy(@{$policy});
-    member(ref $W, qw(Gtk::CList Gtk::CTree Gtk::Text)) ?
-      $w->add($W) :
-      $w->add_with_viewport($W);
-    $W->can("set_focus_vadjustment") and $W->set_focus_vadjustment($w->get_vadjustment);
-    $W->show;
-    $w
-}
-
-sub create_menu($@) {
-    my $title = shift;
-    my $w = new Gtk::MenuItem($title);
-    $w->set_submenu(gtkshow(gtkappend(new Gtk::Menu, @_)));
-    $w
-}
-
-sub add2notebook {
-    my ($n, $title, $book) = @_;
-
-    my ($w1, $w2) = map { new Gtk::Label($_) } $title, $title;
-    $book->{widget_title} = $w1;
-    $n->append_page_menu($book, $w1, $w2);
-    $book->show;
-    $w1->show;
-    $w2->show;
-}
-
-sub create_notebook(@) {
-    my $n = new Gtk::Notebook;
-    add2notebook($n, splice(@_, 0, 2)) while @_;
-    $n
-}
-
-sub create_adjustment($$$) {
-    my ($val, $min, $max) = @_;
-    new Gtk::Adjustment($val, $min, $max + 1, 1, ($max - $min + 1) / 10, 1);
-}
-
-sub create_packtable($@) {
-    my ($options, @l) = @_;
-    my $w = new Gtk::Table(0, 0, $options->{homogeneous} || 0);
-    map_index {
-	my ($i, $l) = ($_[0], $_);
-	map_index {
-	    my ($j) = @_;
-	    if ($_) {
-		ref $_ or $_ = new Gtk::Label($_);
-		$j != $#$l ?
-		  $w->attach($_, $j, $j + 1, $i, $i + 1, 'fill', 'fill', 5, 0) :
-		  $w->attach($_, $j, $j + 1, $i, $i + 1, 1|4, ref($_) eq 'Gtk::ScrolledWindow' ? 1|4 : 0, 0, 0);
-		$_->show;
-	    }
-	} @$l;
-    } @l;
-    $w->set_col_spacings($options->{col_spacings} || 0);
-    $w->set_row_spacings($options->{row_spacings} || 0);
-    $w
-}
-
-sub create_hbox {
-    my $w = gtkset_border_width(new Gtk::HButtonBox, 3);
-    $w->set_layout($_[0] || "spread");
-    $w;
-}
-sub create_vbox {
-    my $w = new Gtk::VButtonBox;
-    $w->set_layout(-spread);
-    $w;
-}
-
-
-sub _create_window($$) {
-    my ($o, $title) = @_;
-    my $w = new Gtk::Window;
-    my $gc = Gtk::Gdk::GC->new(gtkroot());
-    !$::isStandalone && !$::live && !$::g_auto_install and $my_gtk::shape_width = 3;
-#-  $gc->set_foreground(gtkcolor(8448, 17664, 40191)); #- in hex : 33, 69, 157
-    $gc->set_foreground(gtkcolor(5120, 10752, 22784)); #- in hex : 20, 42, 89
-#-    $gc->set_foreground(gtkcolor(16896, 16896, 16896)); #- in hex : 66, 66, 66
-    my $inner = gtkadd(my $f_ = gtkset_shadow_type(new Gtk::Frame(undef), 'out'),
-		       my $f = gtkset_border_width(gtkset_shadow_type(new Gtk::Frame(undef), 'none'), 3)
-		      );
-    my $table;
-    if ($::isStandalone || $::live || $::g_auto_install || $::noShadow) { gtkadd($w, $inner) } else {
-	my $sqw = $my_gtk::shape_width;
-	gtkadd($w, $table = new Gtk::Table(2, 2, 0));
-	$table->attach( $inner, 0, 1, 0, 1, 1|4, 1|4, 0, 0);
-	$table->attach( gtksignal_connect(gtkset_usize(new Gtk::DrawingArea, $sqw, 1), expose_event => sub {
-					      $_[0]->window->draw_rectangle($_[0]->style->bg_gc('normal'), 1, 0, 0, $sqw, $sqw);
-					      $_[0]->window->draw_rectangle($gc, 1, 0, $sqw, $sqw, $_[0]->allocation->[3]);
-					  }),
-			1, 2, 0, 1, 'fill', 'fill', 0, 0);
-	$table->attach( gtksignal_connect(gtkset_usize(new Gtk::DrawingArea, 1, $sqw), expose_event => sub {
-					      $_[0]->window->draw_rectangle($_[0]->style->bg_gc('normal'), 1, 0, 0, $sqw, $sqw);
-					      $_[0]->window->draw_rectangle($gc, 1, $sqw, 0, $_[0]->allocation->[2], $sqw);
-					  }),
-			0, 1, 1, 2, 'fill', 'fill', 0, 0);
-	$table->attach( gtksignal_connect(gtkset_usize(new Gtk::DrawingArea, $sqw, $sqw), expose_event => sub {
-					      $_[0]->window->draw_rectangle($gc, 1, 0, 0, $sqw, $sqw);
-					  }),
-			1, 2, 1, 2, 'fill', 'fill', 0, 0);
-	$table->show_all;
-    }
-    $w->set_name("Title");
-    $w->set_title($title);
-
-    $w->signal_connect(expose_event => sub { eval { $interactive::objects[-1]{rwindow} == $w and $w->window->XSetInputFocus } }) if $my_gtk::force_focus || $o->{force_focus};
-    $w->signal_connect(delete_event => sub { $w->destroy; die 'wizcancel' });
-    $w->set_uposition(@{$my_gtk::force_position || $o->{force_position}}) if $my_gtk::force_position || $o->{force_position};
-
-    my $focusing;
-    $w->signal_connect(focus => sub { 
-        return 1 if $focusing;
-	$focusing = 1;
-	Gtk->idle_add(sub { $w->ensure_focus($_[0]); $focusing = 0; 0 }, $_[1]);
-    }) if $w->can('ensure_focus');
-
-    if ($::o->{mouse}{unsafe}) {
-	$w->set_events("pointer_motion_mask");
-	my $signal;
-	$signal = $w->signal_connect(motion_notify_event => sub {
-	    delete $::o->{mouse}{unsafe};
-	    log::l("unsetting unsafe mouse");
-	    $w->signal_disconnect($signal);
-	});
-    }
-    $w->signal_connect(key_press_event => sub {
-	my $d = ${{ 0xffbe => 'help',
-		    0xffbf => 'screenshot',
-	            0xffc9 => 'next',
-		    0xffc8 => 'previous' }}{$_[1]{keyval}};
-
-	if ($d eq "help") {
-	    require install_gtk;
-	    install_gtk::create_big_help($::o);
-	} elsif ($::isInstall && $d eq 'screenshot') {
-	    common::take_screenshot($o);
-	} elsif (chr($_[1]{keyval}) eq 'e' && $_[1]{state} & 8) {
-	    log::l("Switching to " . ($::expert ? "beginner" : "expert"));
-	    $::expert = !$::expert;
-	} elsif ($d) {
-	    #- previous field is created here :(
-	    my $s; foreach (reverse @{$::o->{orderedSteps}}) {
-		$s->{previous} = $_ if $s;
-		$s = $::o->{steps}{$_};
-	    }
-	    $s = $::o->{step};
-	    do { $s = $::o->{steps}{$s}{$d} } until !$s || $::o->{steps}{$s}{reachable};
-	    $::setstep && $s and die "setstep $s\n";
-	}
-    });# if $::isInstall;
-
-    $w->signal_connect(size_allocate => sub {
-	my ($wi, $he) = @{$_[1]}[2,3];
-	my ($X, $Y, $Wi, $He) = @{$my_gtk::force_center || $o->{force_center}};
-        $w->set_uposition(max(0, $X + ($Wi - $wi) / 2), max(0, $Y + ($He - $he) / 2));
-
-	if (!$::isStandalone && !$::live && !$::g_auto_install && !$::noShadow) {
-	    my $sqw = $my_gtk::shape_width; #square width
-	    my $wia = int(($wi+7)/8);
-	    my $s = "\xFF" x ($wia*$he);
-	    my $wib = $wia*8;
-	    my $dif = $wib-$wi;
-	    foreach my $y (0..$sqw-1) { vec($s, $wib-1-$dif-$_+$wib*$y, 1) = 0x0 foreach (0..$sqw-1) }
-	    foreach my $y (0..$sqw-1) { vec($s, (($he-1)*$wib)-$wib*$y+$_, 1) = 0x0 foreach (0..$sqw-1) }
-	    $w->realize;
-	    my $b = Gtk::Gdk::Bitmap->create_from_data($w->window, $s, $wib, $he);
-	    $w->window->shape_combine_mask($b, 0, 0);
-	}
-    }) if ($my_gtk::force_center || $o->{force_center}) && !($my_gtk::force_position || $o->{force_position}) ;
-
-    $o->{window} = $f;
-    $o->{rwindow} = $w;
-    $table and $table->draw(undef);
-}
-
-my ($next_child, $left, $right, $up, $down);
-{
-    my $next_child = sub {
-	my ($c, $dir) = @_;
-
-	my @childs = $c->parent->children;
-   
-	my $i; for ($i = 0; $i < @childs; $i++) {
-	    last if $childs[$i] == $c || $childs[$i]->subtree == $c;
-	}
-	$i += $dir;
-	0 <= $i && $i < @childs ? $childs[$i] : undef;
-    };
-    $left = sub { &$next_child($_[0]->parent, 0); };
-    $right = sub {
-	my ($c) = @_;
-	if ($c->subtree) {
-	    $c->expand;
-	    ($c->subtree->children)[0];
-	} else {
-	    $c;
-	}
-    };
-    $down = sub {
-	my ($c) = @_;
-	return &$right($c) if ref $c eq "Gtk::TreeItem" && $c->subtree && $c->expanded;
-
-	if (my $n = &$next_child($c, 1)) {
-	    $n;
-	} else {
-	    return if ref $c->parent ne 'Gtk::Tree';	
-	    &$down($c->parent);
-	}
-    };
-    $up = sub {
-	my ($c) = @_;
-	if (my $n = &$next_child($c, -1)) {
-	    $n = ($n->subtree->children)[-1] while ref $n eq "Gtk::TreeItem" && $n->subtree && $n->expanded;
-	    $n;
-	} else {
-	    return if ref $c->parent ne 'Gtk::Tree';	
-	    &$left($c);
-	}
-    };
-}
-
-sub create_treeitem($) {
-    my ($name) = @_;
-    
-    my $w = new Gtk::TreeItem($name);
-    $w->signal_connect(key_press_event => sub {
-        my (undef, $e) = @_;
-        local $_ = chr ($e->{keyval});
-
-	if ($e->{keyval} > 0x100) {
-	    my $n;
-	    $n = &$left($w)  if /[Q�\x96]/;
-	    $n = &$right($w) if /[S�\x98]/;
-	    $n = &$up($w)    if /[R�\x97]/;
-	    $n = &$down($w)  if /[T�\x99]/;
-	    if ($n) {
-		$n->focus('up');
-		$w->signal_emit_stop("key_press_event"); 
-	    }
-	    $w->expand if /[+�]/;
-	    $w->collapse if /[-\xad]/;
-	    do { 
-		$w->expanded ? $w->collapse : $w->expand; 
-		$w->signal_emit_stop("key_press_event"); 
-	    } if /[\r\x8d]/;
-	}
-        1;
-    });
-    $w;
-}
-
-
-
-#-###############################################################################
-#- ask_XXX
-
-#- just give a title and some args, and it will return the value given by the user
-#-###############################################################################
-
-sub ask_warn       { my $w = my_gtk->new(shift @_); $w->_ask_warn(@_); main($w); }
-sub ask_yesorno    { my $w = my_gtk->new(shift @_); $w->_ask_okcancel(@_, _("Yes"), _("No")); main($w); }
-sub ask_okcancel   { my $w = my_gtk->new(shift @_); $w->_ask_okcancel(@_, _("Is this correct?"), _("Ok"), _("Cancel")); main($w); }
-sub ask_from_entry { my $w = my_gtk->new(shift @_); $w->_ask_from_entry(@_); main($w); }
-
-sub _ask_from_entry($$@) {
-    my ($o, @msgs) = @_;
-    my $entry = new Gtk::Entry;
-    my $f = sub { $o->{retval} = $entry->get_text; Gtk->main_quit };
-    $o->{ok_clicked} = $f;
-    $o->{cancel_clicked} = sub { undef $o->{retval}; Gtk->main_quit };
-
-    gtkadd($o->{window},
-	  gtkpack($o->create_box_with_title(@msgs),
-		 gtksignal_connect($entry, 'activate' => $f),
-		 ($o->{hide_buttons} ? () : create_okcancel($o))),
-	  );
-    $entry->grab_focus;
-}
-
-sub _ask_warn($@) {
-    my ($o, @msgs) = @_;
-    gtkadd($o->{window},
-	  gtkpack($o->create_box_with_title(@msgs),
-		 gtksignal_connect(my $w = new Gtk::Button(_("Ok")), "clicked" => sub { Gtk->main_quit }),
-		 ),
-	  );
-    $w->grab_focus;
-}
-
-sub _ask_okcancel($@) {
-    my ($o, @msgs) = @_;
-    my ($ok, $cancel) = splice @msgs, -2;
-
-    gtkadd($o->{window},
-	   gtkpack(create_box_with_title($o, @msgs),
-		   create_okcancel($o, $ok, $cancel),
-		 )
-	 );
-    $o->{ok}->grab_focus;
-}
-
-
-sub _ask_file {
-    my ($o, $title, $path) = @_;
-    my $f = $o->{rwindow} = new Gtk::FileSelection $title;
-    $f->set_filename($path);
-    $f->ok_button->signal_connect(clicked => sub { $o->{retval} = $f->get_filename ; Gtk->main_quit });
-    $f->cancel_button->signal_connect(clicked => sub { Gtk->main_quit });
-    $f->hide_fileop_buttons;
-}
-
-sub ask_browse_tree_info {
-    my ($common) = @_;
-
-    my $w = my_gtk->new($common->{title});
-    my $tree = Gtk::CTree->new(3, 0);
-    $tree->set_selection_mode('browse');
-    $tree->set_column_auto_resize($_, 1) foreach 1..2;
-    $tree->set_column_width(0, 200);
-
-    gtkadd($w->{window}, 
-	   gtkpack_(new Gtk::VBox(0,5),
-		    0, $common->{message},
-		    1, gtkpack(new Gtk::HBox(0,0),
-			       createScrolledWindow($tree),
-			       gtkadd(gtkset_usize(new Gtk::Frame(_("Info")), $::windowwidth - 490, 0),
-				      createScrolledWindow(my $info = new Gtk::Text),
-				     )),
-		    0, my $l = new Gtk::HBox(0,15),
-		    0, gtkpack(new Gtk::HBox(0,10),
-			       my $go = gtksignal_connect(new Gtk::Button($common->{ok}), "clicked" => sub { $w->{retval} = 1; Gtk->main_quit }),
-			       $common->{cancel} ? (gtksignal_connect(new Gtk::Button($common->{cancel}), "clicked" => sub { $w->{retval} = 0; Gtk->main_quit })) : (),
-			      )
-    ));
-    gtkpack__($l, my $toolbar = new Gtk::Toolbar('horizontal', 'icons'));
-
-    if ($common->{auto_deps}) {
-	gtkpack__($l, gtksignal_connect(gtkset_active(new Gtk::CheckButton($common->{auto_deps}), $common->{state}{auto_deps}),
-					clicked => sub { invbool \$common->{state}{auto_deps} }));
-    }
-    $l->pack_end(my $status = new Gtk::Label, 0, 1, 20);
-
-    $w->{window}->set_usize(map { $_ - 2 * $my_gtk::border - 4 } $::windowwidth, $::windowheight);
-    $go->grab_focus;
-    $w->{rwindow}->show_all;
-
-    my @toolbar = (ftout  =>  [ _("Expand Tree") , sub { $tree->expand_recursive(undef) } ],
-		   ftin   =>  [ _("Collapse Tree") , sub { $tree->collapse_recursive(undef) } ],
-		   reload =>  [ _("Toggle between flat and group sorted"), sub { invbool(\$common->{state}{flat}); $common->{rebuild_tree}->() } ]);
-    foreach my $ic (@{$common->{icons} || []}) {
-	push @toolbar, ( $ic->{icon} => [ $ic->{help}, sub {
-					     if ($ic->{code}) {
-						 my $w = $ic->{wait_message} && $common->{wait_message}->('', $ic->{wait_message});
-						 $ic->{code}();
-						 $common->{rebuild_tree}->();
-					     }
-					 } ]);
-    }
-    my %toolbar = @toolbar;
-    $toolbar->set_button_relief("none");
-    foreach (grep_index { $::i % 2 == 0 } @toolbar) {
-	gtksignal_connect($toolbar->append_item(undef, $toolbar{$_}[0], undef, gtkpng("$ENV{SHARE_PATH}/$_.png")),
-			  clicked => $toolbar{$_}[1]);
-    }
-    $toolbar->set_style("icons");
-
-    my $widgets = { w => $w, tree => $tree, info => $info, status => $status};
-    ask_browse_tree_info_given_widgets($common, $widgets);
-}
-
-sub ask_browse_tree_info_given_widgets {
-    my ($common, $w) = @_;
-    my ($curr, $parent, $prev_label, $idle);
-    my (%wtree, %ptree, %pix);
-    my $update_size = sub {
-	my $new_label = $common->{get_status}();
-	$prev_label ne $new_label and $w->{status}->set($prev_label = $new_label);
-    };
-    
-    my $set_node_state_flat = sub {
-	my ($node, $state) = @_;
-	unless ($pix{$state}) {
-	    foreach ("$ENV{SHARE_PATH}/$state.png", "$ENV{SHARE_PATH}/rpm-$state.png") {
-		if (-e $_) {
-		    $pix{$state} = [ gtkcreate_png($_) ];
-		    last;
-		}
-	    }
-	    $pix{$state} or die "unable to find a pixmap for state $state";
-	}
-	$w->{tree}->node_set_pixmap($node, 1, $pix{$state}[0], $pix{$state}[1]);
-    };
-    my $set_node_state_tree; $set_node_state_tree = sub {
-	my ($node, $state) = @_;
-	unless ($pix{$state}) {
-	    foreach ("$ENV{SHARE_PATH}/$state.png", "$ENV{SHARE_PATH}/rpm-$state.png") {
-		if (-e $_) {
-		    $pix{$state} = [ gtkcreate_png($_) ];
-		    last;
-		}
-	    }
-	    $pix{$state} or die "unable to find a pixmap for state $state";
-	}
-	if ($node->{state} ne $state) {
-	    if ($node->row->is_leaf) {
-		my $parent = $node->row->parent;
-		my $stats = $parent->{state_stats} ||= {}; --$stats->{$node->{state}}; ++$stats->{$state};
-		my @list = grep { $stats->{$_} > 0 } keys %$stats;
-		my $new_state = @list == 1 ? $list[0] : 'semiselected';
-		$parent->{state} ne $new_state and $set_node_state_tree->($parent, $new_state);
-	    }
-	    $w->{tree}->node_set_pixmap($node, 1, $pix{$state}[0], $pix{$state}[1]);
-	    $node->{state} = $state; #- hack to to get this features efficiently.
-	}
-    };
-    my $set_node_state = $common->{state}{flat} ? $set_node_state_flat : $set_node_state_tree;
-
-    my $set_leaf_state = sub {
-	my ($leaf, $state) = @_;
-	$set_node_state->($_, $state) foreach @{$ptree{$leaf}};
-    };
-    my $add_parent; $add_parent = sub {
-	my ($root, $state) = @_;
-	$root or return undef;
-	if (my $w = $wtree{$root}) { return $w }
-	my $s; foreach (split '\|', $root) {
-	    my $s2 = $s ? "$s|$_" : $_;
-	    $wtree{$s2} ||= do {
-		my $n = $w->{tree}->insert_node($s ? $add_parent->($s, $state) : undef, undef, [$_, '', ''], 5, (undef) x 4, 0, 0);
-		$n;
-	    };
-	    $s = $s2;
-	}
-	$set_node_state->($wtree{$s}, $state); #- use this state by default as tree is building.
-	$wtree{$s};
-    };
-    my $add_node = sub {
-	my ($leaf, $root) = @_;
-	my $state = $common->{node_state}($leaf) or return;
-	my $node = $w->{tree}->insert_node($add_parent->($root, $state), undef, [$leaf, '', ''], 5, (undef) x 4, 1, 0);
-	$set_node_state->($node, $state);
-	push @{$ptree{$leaf}}, $node;
-    };
-    $common->{rebuild_tree} = sub {
-	foreach (values %ptree) {
-	    delete $_->{state} foreach @$_;
-	}
-	foreach (values %wtree) {
-	    delete $_->{state};
-	    delete $_->{state_stats};
-	}
-	%ptree = %wtree = ();
-
-	$w->{tree}->freeze;
-	while (1) { $w->{tree}->remove_node($w->{tree}->node_nth(0) || last) }
-
-	$set_node_state = $common->{state}{flat} ? $set_node_state_flat : $set_node_state_tree;
-	$common->{build_tree}($add_node, $common->{state}{flat}, $common->{tree_mode});
-
-	$w->{tree}->thaw;
-	&$update_size;
-    };
-    $common->{rebuild_tree}->();
-    
-    my $display_info = sub { gtktext_insert($w->{info}, $common->{get_info}($curr)); 0 };
-    my $children = sub { map { ($w->{tree}->node_get_pixtext($_, 0))[0] } gtkctree_children($_[0]) };
-    my $toggle = sub {
-	if (ref $curr && ! $_[0]) {
-	    $w->{tree}->toggle_expansion($curr);
-	} else {
-	    if (ref $curr) {
-		my @l = $common->{grep_allowed_to_toggle}($children->($curr)) or return;
-		my @unsel = $common->{grep_unselected}(@l);
-		my @p = @unsel ?
-		  @unsel : # not all is selected, select all
-		    @l;
-		$common->{toggle_nodes}($set_leaf_state, @p);
-		&$update_size;
-		$parent = $curr;
-	    } else {
-		$common->{check_interactive_to_toggle}($curr) and $common->{toggle_nodes}($set_leaf_state, $curr);
-		&$update_size;
-	    }
-	}
-    };
-
-    $w->{tree}->signal_connect(key_press_event => sub {
-        my ($w, $e) = @_;
-	my $c = chr($e->{keyval} & 0xff);
-	$toggle->(0) if $e->{keyval} >= 0x100 ? $c eq "\r" || $c eq "\x8d" : $c eq ' ';
-	1;
-    });
-    $w->{tree}->signal_connect(tree_select_row => sub {
-	Gtk->timeout_remove($idle) if $idle;
-
-	if ($_[1]->row->is_leaf) {
-	    ($curr) = $w->{tree}->node_get_pixtext($_[1], 0);
-	    $parent = $_[1]->row->parent;
-	    $idle = Gtk->timeout_add(100, $display_info);
-	} else {
-	    $curr = $_[1];
-	}
-	$toggle->(1) if $_[2] == 1;
-    });
-    &$update_size;
-    my $b = before_leaving { #- ensure cleaning here.
-	foreach (values %ptree) {
-	    delete $_->{state} foreach @$_;
-	}
-	foreach (values %wtree) {
-	    delete $_->{state};
-	    delete $_->{state_stats};
-	}
-    };
-    $w->{w}->main;
-}
-
-1;
-
-#-###############################################################################
-#- rubbish
-#-###############################################################################
-
-#-sub label_align($$) {
-#-    my $w = shift;
-#-    local $_ = shift;
-#-    $w->set_alignment(!/W/i, !/N/i);
-#-    $w
-#-}
-
diff --git a/perl-install/network.pm b/perl-install/network.pm
deleted file mode 100644
index 9979e439e..000000000
--- a/perl-install/network.pm
+++ /dev/null
@@ -1,5 +0,0 @@
-package network; # $Id$
-
-use network::network;
-
-1;
diff --git a/perl-install/network/adsl.pm b/perl-install/network/adsl.pm
deleted file mode 100644
index d8d2a4758..000000000
--- a/perl-install/network/adsl.pm
+++ /dev/null
@@ -1,172 +0,0 @@
-package network::adsl;
-
-use common;
-use run_program;
-use network::tools;
-use network::ethernet;
-use modules;
-
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(adsl_ask_info adsl_detect adsl_conf adsl_conf_backend);
-
-sub configure {
-    my ($netcnx, $netc, $intf, $first_time) = @_;
-    $::isInstall and $in->set_help('configureNetworkADSL');
-  conf_adsl_step1:
-    my $type = $in->ask_from_list_(_("Connect to the Internet"),
-				   _("The most common way to connect with adsl is pppoe.
-Some connections use pptp, a few ones use dhcp.
-If you don't know, choose 'use pppoe'"), [__("use pppoe"), __("use pptp"), __("use dhcp"), __("Alcatel speedtouch usb")]) or return;
-    $type =~ s/use //;
-    if ($type eq 'pppoe') {
-	$in->do_pkgs->install("rp-$type");
-	$netcnx->{type} = "adsl_$type";
-	$netcnx->{"adsl_$type"} = {};
-	adsl_conf($netcnx->{"adsl_$type"}, $netc, $intf, $type) or goto conf_adsl_step1;
-	#-network::configureNetwork($prefix, $netc, $in, $intf, $first_time);
-#  	if ($::isStandalone and $netc->{NET_DEVICE}) {
-#  	    $in->ask_yesorno(_("Network interface"),
-#  			     _("I'm about to restart the network device %s. Do you agree?", $netc->{NET_DEVICE}), 1)
-#  	      and system("$prefix/sbin/ifdown $netc->{NET_DEVICE}; $prefix/sbin/ifup $netc->{NET_DEVICE}");
-#  	}
-    }
-    if ($type eq 'dhcp') {
-	$in->do_pkgs->install(qw(dhcpcd));
-	go_ethernet($netc, $intf, 'dhcp', '', '', $first_time) or goto conf_adsl_step1;
-    }
-    if ($type eq 'pptp') {
-	$in->do_pkgs->install(qw(pptp-adsl));
-	$netcnx->{type} = "adsl_$type";
-	$netcnx->{"adsl_$type"} = {};
-	adsl_conf($netcnx->{"adsl_$type"}, $netc, $intf, $type) or goto conf_adsl_step1;
-    }
-    if ($type =~ /speedtouch/) {
-	$type = 'speedtouch';
-	$in->do_pkgs->install(qw(speedtouch));
-	$netcnx->{type} = "adsl_$type";
-	$netcnx->{"adsl_$type"} = {};
-	$netcnx->{"adsl_$type"}{vpivci} = '';
-	adsl_conf($netcnx->{"adsl_$type"}, $netc, $intf, $type) or goto conf_adsl_step1;
-    }
-    $type =~ /speedtouch/ or $netconnect::need_restart_network = 1;
-    1;
-}
-
-sub adsl_ask_info {
-    my ($adsl, $netc, $intf) = @_;
-    add2hash($netc, { dnsServer2 => '', dnsServer3 => '', DOMAINNAME2 => '' });
-    add2hash($adsl, { login => '', passwd => '', passwd2 => '' });
-    ask_info2($adsl, $netc);
-}
-
-#- adsl_detect : detect adsl modem on a given interface
-#- input :
-#-  $interface : interface where the modem is supposed to be connected : should be "ethx"
-#- output:
-#-  true/false : success|failed
-sub adsl_detect {
-    return 0;
-    my ($interface) = @_;
-    run_program::rooted($prefix, "ifconfig $interface 10.0.0.10 netmask 255.255.255.0");
-    my $ret=run_program::rooted($prefix, "/bin/ping -c 1 10.0.0.138  2> /dev/null");
-    run_program::rooted($prefix, "ifconfig $interface 0.0.0.0 netmask 255.255.255.0");
-    run_program::rooted($prefix, "/etc/init.d/network restart");
-    $ret;
-}
-
-sub adsl_conf {
-    my ($adsl, $netc, $intf, $adsl_type) = @_;
-
-  adsl_conf_step_1:
-    adsl_ask_info ($adsl, $netc, $intf) or return;
-  adsl_conf_step_2:
-    $adsl_type eq 'speedtouch' or conf_network_card($netc, $intf, 'static' , '10.0.0.10' ) or goto adsl_conf_step_1;
-    adsl_conf_backend($adsl, $netc, $adsl_type);
-    1;
-}
-
-sub adsl_conf_backend {
-    my ($adsl, $netc, $adsl_type, $netcnx) = @_;
-    defined $netcnx and $netc->{adsltype} = $netcnx->{type};
-    $netc->{adsltype} ||= "adsl_$adsl_type";
-    mkdir_p("$prefix/etc/ppp");
-    output("$prefix/etc/ppp/options",
-'lock
-noipdefault
-persist
-noauth
-usepeerdns
-defaultroute
-') if $adsl_type =~ /pptp|pppoe|speedtouch/;
-
-    write_secret_backend($adsl->{login}, $adsl->{passwd});
-
-    if ($adsl_type eq 'pppoe') {
-	substInFile {
-	    s/ETH=.*\n/ETH=$netc->{NET_DEVICE}\n/;
-	    s/USER=.*\n/USER=$adsl->{login}\n/;
-	} "$prefix/etc/ppp/pppoe.conf";
-    }
-
-    if ($adsl_type eq 'speedtouch') {
-	$netc->{vpivci} =~ /(\d+)_(\d+)/;
-	output("$prefix/etc/ppp/peers/adsl", 
-qq{noauth
-noipdefault
-pty "/usr/bin/pppoa3 -vpi $1 -vci $2"
-sync
-kdebug 1
-noaccomp
-nopcomp
-noccp
-novj
-holdoff 4
-maxfail 25
-persist
-usepeerdns
-defaultroute
-user "$adsl->{login}"
-});
-	modules::add_alias($_->[0], $_->[1]) foreach (['char-major-108', 'ppp_generic'],
-						      ['tty-ldisc-3', 'ppp_async'],
-						      ['tty-ldisc-13', 'n_hdlc'],
-						      ['tty-ldisc-14', 'ppp_synctty'],
-						      ['ppp-compress-21', 'bsd_comp'],
-						      ['ppp-compress-24', 'ppp_deflate'],
-						      ['ppp-compress-26', 'ppp_deflate']);
-	$::isStandalone and modules::write_conf($prefix);
-	$in->do_pkgs->install('speedtouch_mgmt');
-	-e "$prefix/usr/share/speedtouch/mgmt.o" or $in->ask_warn('', _('You need the alcatel microcode.
-Download it at
-http://www.alcatel.com/consumer/dsl/dvrreg_lx.htm
-and copy the mgmt.o in /usr/share/speedtouch'));
-    }
-
-    if ($adsl_type eq 'pptp') {
-	write_cnx_script($netc, "adsl",
-"/sbin/route del default
-/usr/bin/pptp 10.0.0.138 name $adsl->{login}
-",
-'/usr/bin/killall pptp pppd
-', $netc->{adsltype}) } elsif ($adsl_type eq 'pppoe') {
-    write_cnx_script($netc, "adsl",
-"/sbin/route del default
-LC_ALL=C LANG=C LANGUAGE=C LC_MESSAGES=C /usr/sbin/adsl-start $netc->{NET_DEVICE} $adsl->{login}
-",
-'/usr/sbin/adsl-stop
-/usr/bin/killall pppoe pppd
-', $netc->{adsltype}) } elsif ($adsl_type eq 'speedtouch') {
-    write_cnx_script($netc, 'adsl',
-'/sbin/route del default
-/usr/share/speedtouch/speedtouch.sh start
-',
-'/usr/share/speedtouch/speedtouch.sh stop
-', $netc->{adsltype}) }
-
-    $netc->{NET_INTERFACE}='ppp0';
-}
-
-1;
diff --git a/perl-install/network/ethernet.pm b/perl-install/network/ethernet.pm
deleted file mode 100644
index e25cb7e68..000000000
--- a/perl-install/network/ethernet.pm
+++ /dev/null
@@ -1,216 +0,0 @@
-package network::ethernet;
-
-use network::network;
-use modules;
-use any;
-use detect_devices;
-use common;
-use run_program;
-use network::tools;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(configureNetwork conf_network_card conf_network_card_backend go_ethernet);
-
-sub configure_cable {
-    my ($netcnx, $netc, $intf, $first_time) = @_;
-    $::isInstall and $in->set_help('configureNetworkCable');
-    $netcnx->{type}='cable';
-    #  		     $netcnx->{cable}={};
-    #  		     $in->ask_from_entries_ref(_("Cable connection"),
-    #  _("Please enter your host name if you know it.
-    #  Some DHCP servers require the hostname to work.
-    #  Your host name should be a fully-qualified host name,
-    #  such as ``mybox.mylab.myco.com''."),
-    #  					       [_("Host name:")], [ \$netcnx->{cable}{hostname} ]);
-    if ($::expert) {
-	my @m=(
-	       { description => "dhcpcd",
-		 c => 1},
-	       { description => "dhcpxd",
-		 c => 3},
-	       { description => "dhcp-client",
-		 c => 4},
-	      );
-	if (my $f = $in->ask_from_listf(_("Connect to the Internet"),
-					_("Which dhcp client do you want to use?
-Default is dhcpcd"),
-					sub { $_[0]{description} },
-					\@m )) {
-	    $f->{c}==1 and $netcnx->{dhcp_client}="dhcpcd" and $in->do_pkgs->install(qw(dhcpcd));
-	    $f->{c}==3 and $netcnx->{dhcp_client}="dhcpxd" and $in->do_pkgs->install(qw(dhcpxd));
-	    $f->{c}==4 and $netcnx->{dhcp_client}="dhcp-client" and $in->do_pkgs->install(qw(dhcp-client));
-	}
-    } else {
-	$in->do_pkgs->install(qw(dhcpcd));
-    }
-    go_ethernet($netc, $intf, 'dhcp', '', '', $first_time);
-    write_cnx_script($netc, "cable",
-qq(
-/sbin/ifup $netc->{NET_DEVICE}
-),
-qq(
-/sbin/ifdown $netc->{NET_DEVICE}
-), $netcnx->{type});
-    1;
-}
-
-sub configure_lan {
-    my ($netcnx, $netc, $intf, $first_time) = @_;
-    $::isInstall and $in->set_help('configureNetworkIP');
-    configureNetwork($netc, $intf, $first_time) or return;
-    configureNetwork2($in, $prefix, $netc, $intf);
-    $netc->{NETWORKING} = "yes";
-    if ($netc->{GATEWAY} || grep { $_->{BOOTPROTO} eq 'dhcp' } values %$intf) {
-	$netcnx->{type}='lan';
-	$netcnx->{NET_DEVICE} = $netc->{NET_DEVICE} = '';
-	$netcnx->{NET_INTERFACE} = 'lan'; #$netc->{NET_INTERFACE};
-        write_cnx_script($netc, "local network",
-qq(
-/etc/rc.d/init.d/network restart
-),
-qq(
-/etc/rc.d/init.d/network stop
-/sbin/ifup lo
-), $netcnx->{type});
-    }
-    $::isStandalone and modules::write_conf($prefix);
-    1;
-}
-
-sub conf_network_card {
-    my ($netc, $intf, $type, $ipadr, $netadr) = @_;
-    #-type =static or dhcp
-    any::load_category($in, 'network/main|usb', !$::expert, 1);
-    my @all_cards=conf_network_card_backend($netc, $intf, $type, undef, $ipadr, $netadr);
-    my $interface;
-    @all_cards == () and $in->ask_warn('', _("No ethernet network adapter has been detected on your system.
-I cannot set up this connection type.")) and return;
-    @all_cards == 1 and $interface = $all_cards[0]->[0] and goto l1;
-    again :
-	$interface = $in->ask_from_list(_("Choose the network interface"),
-					_("Please choose which network adapter you want to use to connect to Internet"),
-					[ map { $_->[0] . ($_->[1] ? " ( using module $_->[1] )" : "") } @all_cards ]
-				       ) or return;
-    defined $interface or goto again;
-  l1:
-    $::isStandalone and modules::write_conf($prefix);
-
-    my $device=conf_network_card_backend($netc, $intf, $type, $interface, $ipadr, $netadr, $interface);
-#      if ( $::isStandalone and !($type eq "dhcp")) {
-#  	$in->ask_yesorno(_("Network interface"),
-#  			  _("I'm about to restart the network device:\n") . $device . _("\nDo you agree?"), 1) and configureNetwork2($in, $prefix, $netc, $intf) and system("$prefix/sbin/ifdown $device;$prefix/sbin/ifup $device");
-#      }
-    1;
-}
-
-#- conf_network_card_backend : configure the network cards and return the list of them, or configure one specified interface : WARNING, you have to setup the ethernet cards, by calling load_category($in, 'network/main|usb', !$::expert, 1) or load_category_backend before calling this function. Basically, you call this function in 2 times.
-#- input
-#-  $prefix
-#-  $netc
-#-  $intf
-#-  $type : type of interface, must be given if $interface is : string : "static" or "dhcp"
-#-  $interface : facultative, if given, set this interface and return it in a proper form. If not, return @all_cards
-#-  $ipadr : facultative, ip address of the interface : string
-#-  $netadr : facultative, netaddress of the interface : string
-#- when $interface is given, informations are written in $intf and $netc. If not, @all_cards is returned.
-#- $intf output: $device is the result of
-#-  $intf->{$device}->{DEVICE} : which device is concerned : $device is the result of $interface =~ /(eth[0-9]+)/; my $device = $1;;
-#-  $intf->{$device}->{BOOTPROTO} : $type
-#-  $intf->{$device}->{NETMASK} : '255.255.255.0'
-#-  $intf->{$device}->{NETWORK} : $netadr
-#-  $intf->{$device}->{ONBOOT} : "yes"
-#- $netc output:
-#-  $netc->{nb_cards} : nb of ethernet cards
-#-  $netc->{NET_DEVICE} : this is used to indicate that this eth card is used to connect to internet : $device
-#- output:
-#-  $all_cards : a list of a list ( [eth1, module1], ... , [ethn, modulen]). Pass the ethx as $interface in further call.
-#-  $device : only returned in case $interface was given it's $interface, but filtered by /eth[0-9+]/ : string : /eth[0-9+]/
-sub conf_network_card_backend {
-    my ($netc, $intf, $type, $interface, $ipadr, $netadr) = @_;
-    #-type =static or dhcp
-    if (!$interface) {
-	my @all_cards = detect_devices::getNet();
-	$netc->{nb_cards} = @all_cards;
-
-	my @devs = detect_devices::pcmcia_probe();
-	modules::mergein_conf("$prefix/etc/modules.conf");
-	my $saved_driver;
-	return map {
-	    my $interface = $_;
-	    my $a = modules::get_alias($interface);
-	    my $b;
-	    foreach (@devs) {
-		$_->{device} eq $interface and $b = $_->{driver};
-	    }
-	    $a ||= $b;
-	    if ($a) { $saved_driver = $a }
-	    [$interface, $saved_driver];
-	} @all_cards;
-    }
-    my ($device) = $interface =~ /(eth[0-9]+)/ or die("the interface is not an ethx");
-    $netc->{NET_DEVICE} = $device; #- one consider that there is only ONE Internet connection device..
-
-    @{$intf->{$device}}{qw(DEVICE BOOTPROTO   NETMASK     NETWORK ONBOOT)} = 
-                         ($device, $type, '255.255.255.0', $netadr, 'yes');
-
-    $intf->{$device}->{IPADDR} = $ipadr if $ipadr;
-    $device;
-}
-
-sub go_ethernet {
-    my ($netc, $intf, $type, $ipadr, $netadr, $first_time) = @_;
-    conf_network_card($netc, $intf, $type, $ipadr, $netadr) or return;
-    $netc->{NET_INTERFACE}=$netc->{NET_DEVICE};
-    configureNetwork($netc, $intf, $first_time) or return;
-#      if ( $::isStandalone and $netc->{NET_DEVICE}) {
-#  	$in->ask_yesorno(_("Network interface"),
-#  			 _("I'm about to restart the network device %s. Do you agree?", $netc->{NET_DEVICE}), 1) and system("$prefix/sbin/ifdown $netc->{NET_DEVICE}; $prefix/sbin/ifup $netc->{NET_DEVICE}");
-#      }
-    1;
-}
-
-sub configureNetwork {
-    my ($netc, $intf, $first_time) = @_;
-    local $_;
-    any::load_category($in, 'network/main|usb', !$::expert, 1);
-    my @l = detect_devices::getNet() or die _("no network card found");
-    my @all_cards = conf_network_card_backend ($netc, $intf, undef, undef, undef, undef);
-
-  configureNetwork_step_1:
-    my $n_card=0;
-    $netc ||= {};
-    my $last; foreach (@l) {
-	my $intf2 = findIntf($intf ||= {}, $_);
-	add2hash($intf2, $last);
-	add2hash($intf2, { NETMASK => '255.255.255.0' });
-	configureNetworkIntf($netc, $in, $intf2, $netc->{NET_DEVICE}, 0, $all_cards[$n_card]->[1]) or return;
-
-	$last = $intf2;
-	$n_card++;
-    }
-    #-	  {
-    #-	      my $wait = $o->wait_message(_("Hostname"), _("Determining host name and domain..."));
-    #-	      network::guessHostname($o->{prefix}, $o->{netc}, $o->{intf});
-    #-	  }
-    $last or return;
-    if ($last->{BOOTPROTO} =~ /^(dhcp|bootp)$/) {
-	$netc->{minus_one} = 1;
-	my $dhcp_hostname = $netc->{HOSTNAME};
-	$::isInstall and $in->set_help('configureNetworkHostDHCP');
-	$in->ask_from(_("Configuring network"),
-_("Please enter your host name if you know it.
-Some DHCP servers require the hostname to work.
-Your host name should be a fully-qualified host name,
-such as ``mybox.mylab.myco.com''."),
-		      [ { label => _("Host name"), val => \$netc->{HOSTNAME} }]) or goto configureNetwork_step_1;
-	$netc->{HOSTNAME} ne $dhcp_hostname and $netc->{DHCP_HOSTNAME} = $netc->{HOSTNAME};
-    } else {
-	configureNetworkNet($in, $netc, $last ||= {}, @l) or goto configureNetwork_step_1;
-    }
-    miscellaneousNetwork($in);
-    1;
-}
-
-1;
diff --git a/perl-install/network/isdn.pm b/perl-install/network/isdn.pm
deleted file mode 100644
index 4b081274e..000000000
--- a/perl-install/network/isdn.pm
+++ /dev/null
@@ -1,276 +0,0 @@
-package network::isdn;
-
-use network::isdn_consts;
-use common;
-use any;
-use modules;
-use run_program;
-use log;
-use network::tools;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix);
-use MDK::Common::File;
-@ISA = qw(Exporter);
-@EXPORT = qw(isdn_write_config isdn_write_config_backend get_info_providers_backend isdn_ask_info isdn_ask_protocol isdn_ask isdn_detect isdn_detect_backend isdn_get_list isdn_get_info);
-
-sub configure {
-    my ($netcnx, $netc) = @_;
-  isdn_step_1:
-    defined $netc->{autodetect}{isdn}{id} and goto intern_pci;
-    $::isInstall and $in->set_help('configureNetworkISDN');
-    my $e = $in->ask_from_list_(_("Network Configuration Wizard"),
-				_("What kind is your ISDN connection?"), [ __("Internal ISDN card"), __("External ISDN modem")]
-			       ) or return;
-    if ($e =~ /card/) {
-      intern_pci:
-	$netc->{isdntype}='isdn_internal';
-	$netcnx->{isdn_internal}={};
-	$netcnx->{isdn_internal}{$_} = $netc->{autodetect}{isdn}{$_} foreach ('description', 'vendor', 'id', 'driver', 'card_type', 'type');
-	isdn_detect($netcnx->{isdn_internal}, $netc) or return;
-    } else {
-	$netc->{isdntype}='isdn_external';
-	$netcnx->{isdn_external}={};
-	$netcnx->{isdn_external}{device}=$netc->{autodetect}{modem};
-	$netcnx->{isdn_external}{special_command}='AT&F&O2B40';
-	require network::modem;
-	network::modem::pppConfig($netcnx->{isdn_external}, $mouse, $netc) or goto isdn_step_1;
-    }
-    1;
-}
-
-sub isdn_write_config {
-    my ($isdn, $netc) = @_;
-  isdn_write_config_step_1:
-    my $e = $in->ask_from_list_(_("Network Configuration Wizard"),
-				    _("Which ISDN configuration do you prefer?
-
-* The Old configuration uses isdn4net. It contains powerfull
-  tools, but is tricky to configure, and not standard.
-
-* The New configuration is easier to understand, more
-  standard, but with less tools.
-
-We recommand the light configuration.
-"), [ __("New configuration (isdn-light)"), __("Old configuration (isdn4net)")]
-			       ) or return;
-    my ($rmpackage, $instpackage) = $e =~ /light/ ? ('isdn4net', 'isdn-light') : ('isdn-light', 'isdn4net');
-    if (!$::isStandalone) {
-	require pkgs;
-	my $p = pkgs::packageByName($in->{packages}, $rmpackage);
-	$p && pkgs::packageFlagSelected($p) and pkgs::unselectPackage($in->{packages}, $p);
-    }
-    run_program::rooted($prefix, "rpm", "-e", "$rmpackage");
-    $in->do_pkgs->install($instpackage, if_($isdn->{speed} =~ /128/, 'ibod'), 'isdn4k-utils');
-    my $light = $e =~ /light/ ? 1 : 0;
-    isdn_write_config_backend($isdn, $light, $netc);
-    1;
-}
-
-sub isdn_write_config_backend {
-    my ($isdn, $light, $netc, $netcnx) = @_;
-    defined $netcnx and $netc->{isdntype} = $netcnx->{type};
-    if ($light) {
-	modules::mergein_conf("$prefix/etc/modules.conf");
-	if ($isdn->{id}) {
-	    isdn_detect_backend($isdn);
-	} else {
-	    my $a="";
-	    defined $isdn->{$_} and $a .= "$_=" . $isdn->{$_} . " " foreach qw(type protocol mem io io0 io1 irq);
-	    $isdn->{driver} eq "hisax" and $a.="id=HiSax";
-	    modules::set_options($isdn->{driver}, $a);
-	}
-	modules::add_alias("ippp0", $isdn->{driver});
-	$::isStandalone and modules::write_conf($prefix);
-	foreach my $f ('ioptions1B', 'ioptions2B') {
-	    substInFile { s/^name .*\n//; $_ .= "name $isdn->{login}\n" if eof  } "$prefix/etc/ppp/$f";
-	    chmod 0600, $f;
-	}
-	foreach my $f ('isdn1B.conf', 'isdn2B.conf') {
-	    my $a=1;
-	    substInFile {
-		s/EAZ =.*/EAZ = $isdn->{phone_in}/;
-		s/PHONE_OUT =.*/PHONE_OUT = $isdn->{phone_out}/;
-		if (/NAME = ippp0/ .. /PPPBIND = 0/) {
-		    s/HUPTIMEOUT =.*/HUPTIMEOUT = $isdn->{huptimeout}/;
-		}
-	    } "$prefix/etc/isdn/$f";
-	    chmod 0600, $f;
-	}
-	my $bundle = $isdn->{speed} =~ /64/ ? "1B" : "2B";
-	symlinkf("isdn" . $bundle . ".conf", "$prefix/etc/isdn/isdnctrl.conf");
-	symlinkf("ioptions" . $bundle, "$prefix/etc/ppp/ioptions");
-    } else {
-	my $f = "$prefix/etc/isdn/profile/link/myisp";
-	output ($f,
-	  qq(
-I4L_USERNAME="$isdn->{login}"
-I4L_SYSNAME=""
-I4L_LOCALMSN="$isdn->{phone_in}"
-I4L_REMOTE_OUT="$isdn->{phone_out}"
-I4L_DIALMODE="$isdn->{dialing_mode}"
-) . if_($isdn->{speed} =~ /128/, 'SLAVE="ippp1"
-'));
-	chmod 0600, $f;
-
-	output "$prefix/etc/isdn/profile/card/mycard",
-	  qq(
-I4L_MODULE="$isdn->{driver}"
-I4L_TYPE="$isdn->{type}"
-I4L_IRQ="$isdn->{irq}"
-I4L_MEMBASE="$isdn->{mem}"
-I4L_PORT="$isdn->{io}"
-I4L_IO0="$isdn->{io0}"
-I4L_IO1="$isdn->{io1}"
-I4L_ID="HiSax"
-I4L_FIRMWARE="$isdn->{firmware}"
-);
-
-	output "$prefix/etc/ppp/ioptions",
-	  "lock
-usepeerdns
-defaultroute
-";
-	system "$prefix/etc/rc.d/init.d/isdn4linux restart";
-    }
-
-    substInFile { s/^FIRMWARE.*\n//; $_ .= qq(FIRMWARE="$isdn->{firmware}"\n) if eof  } "$prefix/etc/sysconfig/network-scripts/ifcfg-ippp0";
-
-    write_secret_backend($isdn->{login}, $isdn->{passwd});
-
-    write_cnx_script($netc, "isdn",
-"/sbin/route del default
-/sbin/ifup ippp0
-/sbin/isdnctrl dial ippp0
-" . if_($isdn->{speed} =~ /128/, "service ibod restart
-"),
-"/sbin/isdnctrl hangup ippp0
-/sbin/ifdown ippp0
-"  . if_($isdn->{speed} =~ /128/, "service ibod stop
-"), $netc->{isdntype});
-    1;
-}
-
-sub get_info_providers_backend {
-    my ($isdn, $netc, $name, $file) = @_;
-    $name eq 'Unlisted - edit manually' and return;
-    foreach (catMaybeCompressed($file)) {
-	chop;
-	my ($name_, $phone, $real, $dns1, $dns2) = split '=>';
-	if ($name eq $name_) {
-	    @{$isdn}{qw(user_name phone_out DOMAINNAME2 dnsServer3 dnsServer2)} =
-	               ((split(/\|/, $name_))[2], $phone, $real, $dns1, $dns2);
-	}
-    }
-}
-
-sub isdn_ask_info {
-    my ($isdn, $netc) = @_;
-    my $f = "$ENV{SHARE_PATH}/ldetect-lst/isdn.db";
-    $f = "$prefix$f" if !-e $f;
-    my $str= $in->ask_from_treelist( _("ISDN Configuration"), _("Select your provider.\nIf it isn't listed, choose Unlisted."),
-				     '|', ['Unlisted - edit manually',
-					   read_providers_backend($f)], 'Unlisted - edit manually')
-      or return;
-    get_info_providers_backend($isdn, $netc, $str || 'Unlisted - edit manually', $f);
-    $isdn->{huptimeout} = 180;
-    $isdn->{$_} ||= '' foreach qw(phone_in phone_out dialing_mode login passwd passwd2 idl speed);
-    add2hash($netc, { dnsServer2 => '', dnsServer3 => '', DOMAINNAME2 => '' });
-    ask_info2($isdn, $netc);
-}
-
-sub isdn_ask_protocol {
-    my @toto=(
-	      { description => $::expert ? _("Europe protocol (EDSS1)") : _("Europe protocol"),
-		protokol => 2},
-	      { description => $::expert ? _("Protocol for the rest of the world\nNo D-Channel (leased lines)") : _("Protocol for the rest of the world"),
-		protokol => 3}
-	     );
-    my $e = $in->ask_from_listf(_("ISDN Configuration"),
-				_("Which protocol do you want to use?"),
-				sub { $_[0]{description} },
-				\@toto ) or return 0;
-    $e->{protokol};
-}
-
-sub isdn_ask {
-    my ($isdn, $netc, $label) = @_;
-  isdn_ask_step_1:
-    my $e = $in->ask_from_list_(_("ISDN Configuration"),
-				$label . "\n" . _("What kind of card do you have?"),
-				[ __("ISA / PCMCIA"), __("PCI"), __("I don't know") ]
-			       ) or return;
-    if ($e =~ /PCI/) {
-	$isdn->{card_type} = 'pci';
-    } else {
-	$in->ask_from_list_(_("ISDN Configuration"),
-			    _("
-If you have an ISA card, the values on the next screen should be right.\n
-If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your card.
-"),
-			    [ __("Continue"), __("Abort") ]) eq 'Continue' or goto isdn_ask_step_1;
-	$isdn->{card_type} = 'isa';
-    }
-
-  isdn_ask_step_2:
-    $e = $in->ask_from_listf(_("ISDN Configuration"),
-			     _("Which is your ISDN card?"),
-			     sub { $_[0]{description} },
-			     [ grep {$_->{card} eq $isdn->{card_type}; } @isdndata ] ) or goto isdn_ask_step_1;
-    $e->{$_} and $isdn->{$_} = $e->{$_} foreach qw(driver type mem io io0 io1 irq firmware);
-
-  isdn_ask_step_3:
-    $isdn->{protocol} = isdn_ask_protocol() or goto isdn_ask_step_2;
-  isdn_ask_step_4:
-    isdn_ask_info($isdn, $netc) or goto isdn_ask_step_3;
-    isdn_write_config($isdn, $netc) or goto isdn_ask_step_4;
-    1;
-}
-
-sub isdn_detect {
-    my ($isdn, $netc) = @_;
-    if ($isdn->{id}) {
-  	log::l("found isdn card : $isdn->{description}; vendor : $isdn->{vendor};id : $isdn->{id}; driver : $isdn->{driver}\n");
-	$isdn->{description} =~ s/\|/ -- /;
-	if ($isdn->{type} eq '') {
-	    isdn_ask($isdn, $netc, _("I have detected an ISDN PCI card, but I don't know its type. Please select a PCI card on the next screen.")) or return;
-	} else {
-	  isdn_detect_step_1:
-	    $isdn->{protocol}=isdn_ask_protocol() or return;
-	  isdn_detect_step_2:
-	    isdn_ask_info($isdn, $netc) or goto isdn_detect_step_1;
-	    isdn_write_config($isdn, $netc) or goto isdn_detect_step_2;
-	}
-    } else {
-	isdn_ask($isdn, $netc, _("No ISDN PCI card found. Please select one on the next screen.")) or return;
-    }
-    $netc->{$_}='ippp0' foreach 'NET_DEVICE', 'NET_INTERFACE';
-    1;
-}
-
-sub isdn_detect_backend {
-    my ($isdn) = @_;
-    if (my ($c) = (modules::probe_category('network/isdn'))) {
-  	$isdn->{$_} = $c->{$_} foreach qw(description vendor id driver options firmware);
-	$isdn->{$_} = sprintf("%0x", $isdn->{$_}) foreach ('vendor', 'id');
-	$isdn->{card_type} = 'pci';
-	($isdn->{type}) = $isdn->{options} =~ /type=(\d+)/;
-#	$c->{options} !~ /id=HiSax/ && $isdn->{driver} eq "hisax" and $c->{options} .= " id=HiSax";
-	if ($c->{options} !~ /protocol=/ && $isdn->{protocol} =~ /\d/) {
-	    modules::set_options($c->{driver}, $c->{options} . " protocol=" . $isdn->{protocol});
-	}
-	$c->{options} =~ /protocol=(\d)/ and $isdn->{protocol} = $1;
-    }
-}
-
-sub isdn_get_list {
-    map { $_->{description} } @isdndata;
-}
-
-sub isdn_get_info {
-    my ($desc) = @_;
-    foreach (@isdndata) {
-	return $_ if ($_->{description} eq $desc);
-    }
-}
-
-1;
diff --git a/perl-install/network/isdn_consts.pm b/perl-install/network/isdn_consts.pm
deleted file mode 100644
index 357da529a..000000000
--- a/perl-install/network/isdn_consts.pm
+++ /dev/null
@@ -1,326 +0,0 @@
-package network::isdn; # $Id$
-
-@isdndata =
-  (
-   {description => "Teles 16.0 (ISA)",               #1 irq, mem, io
-    driver => 'hisax',
-    type => '1',
-    irq => '5',
-    mem => '0xd000',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Teles  8.0 (ISA)", #2 irq, mem
-    driver => 'hisax',
-    type => '2',
-    irq => '9',
-    mem => '0xd800',
-    card => 'isa',
-   },
-   {description => "Teles 16.3 (ISA non PnP)", #3 irq, io
-    driver => 'hisax',
-    type => '3',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Teles 16.3c (ISA PnP)", #14 irq, io
-    driver => 'hisax',
-    type => '14',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Creatix/Teles (ISA PnP)",	#4 irq, io0 (ISAC), io1 (HSCX)
-    driver => 'hisax',
-    type => '4',
-    irq => '5',
-    io0 => '0x0000',
-    io1 => '0x0000',
-    card => 'isa',
-   },
-   {description => "Teles generic (PCI)", #21 no parameter
-    driver => 'hisax',
-    type => '21',
-    card => 'pci',
-   },
-   {description => "Teles 16.3 (PCMCIA)",	#8 irq, io
-    driver => 'hisax',
-    type => '8',
-    irq => '',
-    io => '0x',
-    card => 'isa',
-   },
-   {description => "Teles S0Box", #25 irq, io (of the used lpt port)
-    driver => 'hisax',
-    type => '25',
-    irq => '7',
-    io => '0x378',
-    card => 'isa',
-   },
-   {description => "ELSA PCC/PCF cards (ISA)", #6 io or nothing for autodetect (the io is required only if you have n>1 ELSA card )
-    driver => 'hisax',
-    type => '6',
-    io => "",
-    card => 'isa',
-   },
-   {description => "ELSA Quickstep 1000 (ISA)", #7 irq, io  (from isapnp setup)
-    driver => 'hisax',
-    type => '7',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "ELSA Quickstep 1000 (PCI)", #18 no parameter
-    driver => 'hisax',
-    type => '18',
-    card => 'pci',
-   },
-   {description => "ELSA Quickstep 3000 (PCI)", #18 no parameter
-    driver => 'hisax',
-    type => '18',
-    card => 'pci',
-   },
-   {description => "ELSA generic (PCMCIA)", #10 irq, io  (set with card manager)
-    driver => 'hisax',
-    type => '10',
-    irq => '',
-    io => '0x',
-    card => 'isa',
-   },
-   {description => "ELSA MicroLink (PCMCIA)", #10 irq, io  (set with card manager)
-    driver => 'elsa_cs',
-    card => 'isa',
-   },
-   {description => "ITK ix1-micro Rev.2 (ISA)", #9 irq, io
-    driver => 'hisax',
-    type => '9',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Eicon.Diehl Diva (ISA PnP)", #11 irq, io
-    driver => 'hisax',
-    type => '11',
-    irq => '9',
-    io => '0x180',
-    card => 'isa',
-   },
-   {description => "Eicon.Diehl Diva 20 (PCI)", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   {description => "Eicon.Diehl Diva 20PRO (PCI)", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   {description => "Eicon.Diehl Diva 20_U (PCI)", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   {description => "Eicon.Diehl Diva 20PRO_U (PCI)", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   {description => "ASUS COM ISDNLink (ISA)", #12 irq, io  (from isapnp setup)
-    driver => 'hisax',
-    type => '12',
-    irq => '5',
-    io => '0x200',
-    card => 'isa',
-   },
-   {description => "ASUS COM ISDNLink (PCI)",
-    driver => 'hisax',
-    type => '35',
-    card => 'pci',
-   },
-   {description => "DynaLink (PCI)",
-    driver => 'hisax',
-    type => '12',
-    card => 'pci',
-   },
-   {description => "DynaLink IS64PH, ASUSCOM (PCI)", #36
-    driver => 'hisax',
-    type => '36',
-    card => 'pci',
-   },
-   {description => "HFC-2BS0 based cards (ISA)", #13 irq, io
-    driver => 'hisax',
-    type => '13',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "HFC 2BDS0 (PCI)", #35 none
-    driver => 'hisax',
-    type => '35',
-    card => 'pci',
-   },
-   {description => "HFC 2BDS0 S+, SP (PCMCIA)", #37 irq,io (pcmcia must be set with cardmgr)
-    driver => 'hisax',
-    type => '37',
-    card => 'isa',
-   },
-   {description => "Sedlbauer Speed Card (ISA)", #15 irq, io
-    driver => 'hisax',
-    type => '15',
-    irq => '9',
-    io=> '0xd80',
-    card => 'isa',
-   },
-   {description => "Sedlbauer PC/104 (ISA)", #15 irq, io
-    driver => 'hisax',
-    type => '15',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Sedlbauer Speed Card (PCI)", #15 no parameter
-    driver => 'hisax',
-    type => '15',
-    card => 'pci',
-   },
-   {description => "Sedlbauer Speed Star (PCMCIA)", #22 irq, io (set with card manager)
-    driver => 'sedlbauer_cs',
-    card => 'isa',
-   },
-   {description => "Sedlbauer Speed Fax+ (ISA Pnp)", #28 irq, io (from isapnp setup)
-    driver => 'hisax',
-    type => '28',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-    firmware => '/usr/lib/isdn/ISAR.BIN',
-   },
-   {description => "Sedlbauer Speed Fax+ (PCI)", #28 no parameter
-    driver => 'hisax',
-    type => '28',
-    card => 'pci',
-    firmware => '/usr/lib/isdn/ISAR.BIN',
-   },
-   {description => "USR Sportster internal (ISA)", #16 irq, io
-    driver => 'hisax',
-    type => '16',
-    irq => '9',
-    io=> '0xd80',
-    card => 'isa',
-   },
-   {description => "MIC card (ISA)",	#17 irq, io
-    driver => 'hisax',
-    type => '17',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Compaq ISDN S0 card (ISA)", #19 irq, io0, io1, io (from isapnp setup io=IO2)
-    driver => 'hisax',
-    type => '19',
-    irq => '5',
-    io => '0x0000',
-    io0 => '0x0000',
-    io1 => '0x0000',
-    card => 'isa',
-   },
-   {description => "NETjet card (PCI)", #20 no parameter
-    driver => 'hisax',
-    type => '20',
-    card => 'pci',
-   },
-   {description => "Dr. Neuhaus Niccy (ISA PnP)", #24 irq, io0, io1 (from isapnp setup)
-    driver => 'hisax',
-    type => '24',
-    irq => '5',
-    io0 => '0x0000',
-    io1 => '0x0000',
-    card => 'isa',
-   },
-   {description => "Dr. Neuhaus Niccy (PCI)", ##24 no parameter
-    driver => 'hisax',
-    type => '24',
-    card => 'pci',
-   },
-   {description => "AVM A1 (Fritz) (ISA non PnP)", #5 irq, io
-    driver => 'hisax',
-    type => '5',
-    irq => '10',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "AVM (ISA Pnp)", #27 irq, io  (from isapnp setup)
-    driver => 'hisax',
-    type => '27',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "AVM A1 (Fritz) (PCMCIA)", #26 irq, io (set with card manager)
-    driver => 'hisax',
-    type => '26',
-    irq => '',
-    card => 'isa',
-   },
-   {description => "AVM PCI (Fritz!) (PCI)", #27 no parameter
-    driver => 'hisax',
-    type => '27',
-    card => 'pci',
-   },
-   {description => "AVM B1 (PCI)",
-    driver => 'b1pci',
-    card => 'pci',
-   },
-   {description => "Siemens I-Surf 1.0 (ISA Pnp)", #29 irq, io, memory (from isapnp setup)   
-    driver => 'hisax',
-    type => '29',
-    irq => '9',
-    io => '0xd80',
-    mem => '0xd000',
-    card => 'isa',
-   },
-   {description => "ACER P10 (ISA Pnp)",	#30 irq, io (from isapnp setup)   
-    driver => 'hisax',
-    type => '30',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "HST Saphir (ISA Pnp)", #31 irq, io
-    driver => 'hisax',
-    type => '31',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "Telekom A4T (PCI)", #32 none
-    driver => 'hisax',
-    type => '32',
-    card => 'pci',
-   },
-   {description => "Scitel Quadro (PCI)", #33 subcontroller (4*S0, subctrl 1...4)
-    driver => 'hisax',
-    type => '33',
-    card => 'pci',
-   },
-   {description => "Gazel ISDN cards (ISA)", #34 irq,io
-    driver => 'hisax',
-    type => '34',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "Gazel ISDN cards (PCI)", #34 none
-    driver => 'hisax',
-    type => '34',
-    card => 'pci',
-   },
-   {description => "W6692 and Winbond based cards (PCI)", #36 none
-    driver => 'hisax',
-    type => '36',
-    card => 'pci',
-   },
-  );
-
-1;
diff --git a/perl-install/network/modem.pm b/perl-install/network/modem.pm
deleted file mode 100644
index 046ebbf8d..000000000
--- a/perl-install/network/modem.pm
+++ /dev/null
@@ -1,91 +0,0 @@
-package network::modem;
-
-use common;
-use any;
-use modules;
-use detect_devices;
-use mouse;
-use network::tools;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(pppConfig modem_detect_backend);
-
-sub configure{
-    my ($netcnx, $mouse, $netc) = @_;
-    $netcnx->{type}='modem';
-    $netcnx->{$netcnx->{type}}={};
-    $netcnx->{modem}{device}=$netc->{autodetect}{modem};
-  modem_step_1:
-    pppConfig($netcnx->{$netcnx->{type}}, $mouse, $netc) or return;
-    write_cnx_script($netc, "modem",
-q(
-/sbin/route del default
-ifup ppp0
-),
-q(ifdown ppp0
-killall pppd
-), $netcnx->{type});
-    1;
-}
-
-sub pppConfig {
-    my ($modem, $mouse, $netc) = @_;
-
-    $mouse ||={};
-    $mouse->{device} ||= readlink "$prefix/dev/mouse";
-    $::isInstall and $in->set_help('selectSerialPort');
-    $modem->{device} ||= $in->ask_from_listf('', _("Please choose which serial port your modem is connected to."),
-					     \&mouse::serial_port2text,
-					     [ grep { $_ ne $mouse->{device} } (mouse::serial_ports, if_(-e '/dev/modem', '/dev/modem')) ]) || return;
-
-    $::isStandalone || $in->set_help('configureNetworkISP');
-    $in->ask_from('', _("Dialup options"), [
-{ label => _("Connection name"), val => \$modem->{connection} },
-{ label => _("Phone number"), val => \$modem->{phone} },
-{ label => _("Login ID"), val => \$modem->{login} },
-{ label => _("Password"), val => \$modem->{passwd}, hidden => 1 },
-{ label => _("Authentication"), val => \$modem->{auth}, list => [ __("PAP"), __("Terminal-based"), __("Script-based"), __("CHAP") ] },
-{ label => _("Domain name"), val => \$modem->{domain} },
-{ label => _("First DNS Server (optional)"), val => \$modem->{dns1} },
-{ label => _("Second DNS Server (optional)"), val => \$modem->{dns2} },
-    ]) or return;
-    $netc->{DOMAINNAME2} = $modem->{domain};
-    any::pppConfig($in, $modem, $prefix);
-    $netc->{$_}='ppp0' foreach 'NET_DEVICE', 'NET_INTERFACE';
-    1;
-}
-#-AT&F&O2B40
-#- DialString=ATDT0231389595((
-
-#- modem_detect_backend : detects modem on serial ports and fills the infos in $modem : detects only one card
-#- input
-#-  $modem
-#-  $mouse : facultative, hash containing device to exclude not to test mouse port : ( device => /ttyS[0-9]/ )
-#- output:
-#-  $modem->{device} : device where the modem were detected
-sub modem_detect_backend {
-    my ($modem, $mouse) = @_;
-    $mouse ||={};
-    $mouse->{device} ||= readlink "/dev/mouse";
-    my $serdev = arch() =~ /ppc/ ? "macserial" : "serial";
-    eval { modules::load("$serdev") };
-
-    detect_devices::probeSerialDevices();
-    foreach ('modem', map { "ttyS$_" } (0..7)) {
-	next if $mouse->{device} =~ /$_/;
-	next unless -e "/dev/$_";
-	detect_devices::hasModem("/dev/$_") and $modem->{device} = "$_", last;
-    }
-
-    #- add an alias for macserial on PPC
-    modules::add_alias('serial', $serdev) if (arch() =~ /ppc/ && $modem->{device});
-    my @devs = detect_devices::pcmcia_probe();
-    foreach (@devs) {
-	$_->{type} =~ /serial/ and $modem->{device} = $_->{device};
-    }
-
-}
-
-1;
diff --git a/perl-install/network/netconnect.pm b/perl-install/network/netconnect.pm
deleted file mode 100644
index 4998124a1..000000000
--- a/perl-install/network/netconnect.pm
+++ /dev/null
@@ -1,629 +0,0 @@
-
-package network::netconnect;
-
-use diagnostics;
-use strict;
-use vars qw($isdn_init @isdndata @EXPORT);
-
-use common;
-use log;
-use detect_devices;
-use run_program;
-use modules;
-use any;
-use mouse;
-use network;
-
-use network::tools;
-use MDK::Common::Globals "network", qw($in $prefix $connect_file $disconnect_file $connect_prog);
-
-@EXPORT = qw(start_internet stop_internet);
-
-#- intro is called only in standalone.
-sub intro {
-    my ($prefix, $netcnx, $in) = @_;
-    my ($netc, $mouse, $intf) = ({}, {}, {});
-    my $text;
-    my $connected;
-    my $connect_file = "/etc/sysconfig/network-scripts/net_cnx_up";
-    my $disconnect_file = "/etc/sysconfig/network-scripts/net_cnx_down";
-    my $connect_prog = "/etc/sysconfig/network-scripts/net_cnx_pg";
-    read_net_conf($prefix, $netcnx, $netc);
-    if (!$::isWizard) {
-	if (connected()) {
-	    $text=_("You are currently connected to internet.") . (-e $disconnect_file ? _("\nYou can disconnect or reconfigure your connection.") : _("\nYou can reconfigure your connection."));
-	    $connected=1;
-	} else {
-	    $text=_("You are not currently connected to Internet.") . (-e $connect_file ? _("\nYou can connect to Internet or reconfigure your connection.") : _("\nYou can reconfigure your connection."));
-	    $connected=0;
-	}
-	my @l=(
-	       !$connected && -e $connect_file ? { description => _("Connect"),
-						   c => 1} : (),
-	       $connected && -e $disconnect_file ? { description => _("Disconnect"),
-						     c => 2} : (),
-	       { description => _("Configure the connection"),
-		 c => 3},
-	       { description => _("Cancel"),
-		 c => 4},
-	      );
-	my $e = $in->ask_from_listf(_("Internet connection & configuration"),
-				    _($text),
-				    sub { $_[0]{description} },
-				    \@l );
-	run_program::rooted($prefix, $connect_prog) if ($e->{c}==1);
-	run_program::rooted($prefix, $disconnect_file) if ($e->{c}==2);
-	main($prefix, $netcnx, $netc, $mouse, $in, $intf, 0, 0) if ($e->{c}==3);
-	$in->exit(0) if ($e->{c}==4);
-    } else {
-	main($prefix, $netcnx, $netc, $mouse, $in, $intf, 0, 0);
-    }
-}
-
-sub detect {
-    my ($auto_detect, $net_install) = @_;
-    my $isdn={};
-    require network::isdn;
-    network::isdn->import;
-    isdn_detect_backend($isdn);
-    $auto_detect->{isdn}{$_}=$isdn->{$_} foreach qw(description vendor id driver card_type type);
-    $auto_detect->{isdn}{description} =~ s/.*\|//;
-
-    modules::load_category('network/main|usb');
-    require network::ethernet;
-    network::ethernet->import;
-    my @all_cards = conf_network_card_backend (undef, undef, undef, undef, undef, undef);
-    require network::adsl;
-    network::adsl->import;
-    map {
-	( !$net_install and adsl_detect($_->[0]) ) ? $auto_detect->{adsl}=$_->[0] : $auto_detect->{lan}{$_->[0]}=$_->[1]; } @all_cards;
-    my $modem={};
-    require network::modem;
-    network::modem->import;
-    modem_detect_backend($modem);#, $mouse);
-    $modem->{device} and $auto_detect->{modem}=$modem->{device};
-}
-
-sub pre_func {
-    my ($text) = @_;
-    $in->isa('interactive_gtk') or return;
-    $::Wizard_no_previous=1;
-    if ($::isStandalone) {
-	$::Wizard_splash=1;
-	require my_gtk;
-	my_gtk->import(qw(:wrappers));
-	my $W = my_gtk->new(_("Network Configuration Wizard"));
-	gtkadd($W->{window},
-	       gtkpack_(new Gtk::VBox(0, 0),
-			1, write_on_pixmap(gtkpng ("draknet_step"),
-					   20,200,
-					   _("We are now going to configure the %s connection.",_($text)),
-					  ),
-			0, $W->create_okcancel(_("OK"))
-		       )
-	      );
-	$W->main;
-	$::Wizard_splash=0;
-    } else {
-	#- for i18n : %s is the type of connection of the list: (modem, isdn, adsl, cable, local network);
-	$in->ask_okcancel(_("Network Configuration Wizard"), _("\n\n\nWe are now going to configure the %s connection.\n\n\nPress OK to continue.",_($_[0])), 1);
-    }
-    undef $::Wizard_no_previous;
-}
-
-sub init_globals {
-    my ($in, $prefix) = @_;
-    MDK::Common::Globals::init(
-			       in => $in,
-			       prefix => $prefix,
-			       connect_file => "/etc/sysconfig/network-scripts/net_cnx_up",
-			       disconnect_file => "/etc/sysconfig/network-scripts/net_cnx_down",
-			       connect_prog => "/etc/sysconfig/network-scripts/net_cnx_pg" );
-}
-
-sub main {
-    my ($prefix, $netcnx, $netc, $mouse, $in, $intf, $first_time, $direct_fr, $noauto) = @_;
-    init_globals ($in, $prefix);
-    $netc->{minus_one}=0; #When one configure an eth in dhcp without gateway
-    $::isInstall and $in->set_help('configureNetwork');
-    $::isStandalone and read_net_conf($prefix, $netcnx, $netc); # REDONDANCE with intro. FIXME
-    $netc->{NET_DEVICE}=$netcnx->{NET_DEVICE} if $netcnx->{NET_DEVICE}; # REDONDANCE with read_conf. FIXME
-    $netc->{NET_INTERFACE}=$netcnx->{NET_INTERFACE} if $netcnx->{NET_INTERFACE}; # REDONDANCE with read_conf. FIXME
-    network::read_all_conf($prefix, $netc ||= {}, $intf ||= {});
-
-    modules::mergein_conf("$prefix/etc/modules.conf");
-
-    my $direct_net_install;
-    if ($first_time && $::isInstall && ($in->{method} eq "ftp" || $in->{method} eq "http" || $in->{method} eq "nfs")) {
-	(!($::expert || $noauto) or $in->ask_okcancel(_("Network Configuration"),
-						      _("Because you are doing a network installation, your network is already configured.
-Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.
-"), 1)) and do {
-    $netcnx->{type}='lan';
-    output "$prefix$connect_file",
-      qq(
-ifup eth0
-);
-    output "$prefix$disconnect_file",
-      qq(
-ifdown eth0
-);
-    chmod 0755, "$prefix$disconnect_file";
-    chmod 0755, "$prefix$connect_file";
-    $direct_net_install = 1;
-    goto step_5;
-};
-    }
-
-    $netc->{autodetection}=1;
-    $netc->{autodetect}={};
-
-  step_1:
-    $::Wizard_no_previous=1;
-    my @profiles=get_profiles();
-    $in->ask_from(_("Network Configuration Wizard"),
-		  _("Welcome to The Network Configuration Wizard.
-
-We are about to configure your internet/network connection.
-If you don't want to use the auto detection, deselect the checkbox.
-"),
-		  [
-		   if_(@profiles > 1, { label => _("Choose the profile to configure"), val => \$netcnx->{PROFILE}, list => \@profiles }),
-		   { label => _("Use auto detection"), val => \$netc->{autodetection}, type => 'bool' },
-		   if_($::isStandalone, { label => _("Expert Mode"), val => \$::expert, type => 'bool' }),
-		  ]
-		 ) or goto step_5;
-    undef $::Wizard_no_previous;
-    set_profile($netcnx);
-    if ($netc->{autodetection}) {
-	my $w = $in->wait_message(_("Network Configuration Wizard"), _("Detecting devices..."));
-	detect($netc->{autodetect}, $::isInstall && ($in->{method} eq "ftp" || $in->{method} eq "http" || $in->{method} eq "nfs"));
-    }
-
-  step_2:
-
-    my $set_default;
-    my %conf;
-    $conf{$_} = $netc->{autodetect}{$_} ? 1 : 0 foreach 'modem', 'adsl', 'cable', 'lan';
-    $conf{isdn} = $netc->{autodetect}{isdn}{description} ? 1: 0;
-    my @l = (
-	     [_("Normal modem connection"), $netc->{autodetect}{modem}, __("detected on port %s"), \$conf{modem}],
-	     [_("ISDN connection"), $netc->{autodetect}{isdn}{description}, __("detected %s"), \$conf{isdn}],
-	     [_("ADSL connection"), $netc->{autodetect}{adsl}, __("detected on interface %s"), \$conf{adsl}],
-	     [_("Cable connection"), $netc->{autodetect}{cable}, __("cable connection detected"), \$conf{cable}],
-	     [_("LAN connection"), $netc->{autodetect}{lan}, __("ethernet card(s) detected"), \$conf{lan}]
-	);
-    my $i=0;
-    map { defined $set_default or do { $_->[1] and $set_default=$i; }; $i++; } @l;
-    @l = (
-[_("Normal modem connection") . if_($netc->{autodetect}{modem}, " - " . _("detected on port %s", $netc->{autodetect}{modem})), \$conf{modem}],
-[_("ISDN connection") . if_($netc->{autodetect}{isdn}{description}, " - " . _("detected %s", $netc->{autodetect}{isdn}{description})), \$conf{isdn}],
-[_("ADSL connection") . if_($netc->{autodetect}{adsl}, " - " . _("detected on interface %s", $netc->{autodetect}{adsl})), \$conf{adsl}],
-[_("Cable connection") . if_($netc->{autodetect}{cable}, " - " . _("cable connection detected")), \$conf{cable}],
-[_("LAN connection") . if_($netc->{autodetect}{lan}, " - " . _("ethernet card(s) detected")), \$conf{lan}]
-);
-    $::isInstall and $in->set_help('configureNetwork');
-    my $e = $in->ask_from(_("Network Configuration Wizard"), _("Choose the connection you want to configure"),
-			  [ map { { label => $_->[0], val => $_->[1], type => 'bool' } } @l ],
-			  changed => sub {
-			      return if !$netc->{autodetection};
-			      my $c = 0;
-#-			      $conf{adsl} and $c++;
-			      $conf{cable} and $c++;
-			      my $a = keys(%{$netc->{autodetect}{lan}});
-			      0 < $a && $a <= $c and $conf{lan} = undef;
-			  }
-			 ) or goto step_1;
-
-#    load_conf ($netcnx, $netc, $intf);
-    $conf{modem} and do { pre_func("modem"); require network::modem; network::modem::configure($netcnx, $mouse, $netc) or goto step_2 };
-    $conf{isdn} and do { pre_func("isdn"); require network::isdn; network::isdn::configure($netcnx, $netc) or goto step_2 };
-    $conf{adsl} and do { pre_func("adsl"); require network::adsl; network::adsl::configure($netcnx, $netc, $intf, $first_time) or goto step_2};
-    $conf{cable} and do { pre_func("cable"); require network::ethernet; network::ethernet::configure_cable($netcnx, $netc, $intf, $first_time) or goto step_2; $netconnect::need_restart_network = 1; };
-    $conf{lan} and do { pre_func("local network"); require network::ethernet; network::ethernet::configure_lan($netcnx, $netc, $intf, $first_time) or goto step_2; $netconnect::need_restart_network = 1; };
-
-  step_2_1:
-    my $nb = keys %{$netc->{internet_cnx}};
-    if ($nb < 1) {
-    } elsif ($nb > 1) {
-	$in->ask_from(_("Network Configuration Wizard"),
-		      _("You have configured multiple ways to connect to the Internet.\nChoose the one you want to use.\n\n" . if_(!$::isStandalone, "You may want to configure some profiles after the installation, in the Mandrake Control Center")),
-		      [ { label => _("Internet connection"), val => \$netc->{internet_cnx_choice}, list => [ keys %{$netc->{internet_cnx}} ]} ]
-		     ) or goto step_2;
-    } elsif ($nb == 1) {
-	$netc->{internet_cnx_choice} = (keys %{$netc->{internet_cnx}})[0];
-    }
-    member($netc->{internet_cnx_choice}, ('adsl', 'isdn')) and
-      $netc->{at_boot} = $in->ask_yesorno(_("Network Configuration Wizard"), _("Do you want to start the connection at boot?"));
-    if ($netc->{internet_cnx_choice} ) {
-	write_cnx_script($netc);
-	$netcnx->{type} = $netc->{internet_cnx}{$netc->{internet_cnx_choice}}{type};
-    } else {
-	unlink "$prefix/etc/sysconfig/network-scripts/net_cnx_up";
-	unlink "$prefix/etc/sysconfig/network-scripts/net_cnx_down";
-	undef $netc->{NET_DEVICE};
-    }
-
-    my $success = 1;
-    network::configureNetwork2($in, $prefix, $netc, $intf);
-    my $network_configured = 1;
-
-    if ($netconnect::need_restart_network && $::isStandalone and ($::expert or $in->ask_yesorno(_("Network configuration"),
-							  _("The network needs to be restarted"), 1))) {
-#-	run_program::rooted($prefix, "/etc/rc.d/init.d/network stop");
-	if (!run_program::rooted($prefix, "/etc/rc.d/init.d/network restart")) {
-	    $success = 0;
-	    $in->ask_okcancel(_("Network Configuration"), _("A problem occured while restarting the network: \n\n%s", `/etc/rc.d/init.d/network restart`), 0);
-	}
-    }
-
-    write_initscript();
-    $::isStandalone && member($netc->{internet_cnx_choice}, ('modem', 'adsl', 'isdn')) and
-      $success = ask_connect_now($netc->{internet_cnx_choice});
-
-  step_3:
-
-    my $m = $success ? _("Congratulations, the network and Internet configuration is finished.
-The configuration will now be applied to your system.
-
-") . if_($::isStandalone && $in->isa('interactive_gtk'),
-_("After this is done, we recommend that you restart your X environment to avoid any hostname-related problems."))
-      : _("Problems occured during configuration.
-Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration.");
-    if ($::isWizard) {
-	$::Wizard_no_previous=1;
-	$::Wizard_finished=1;
-	$in->ask_okcancel(_("Network Configuration"), $m, 1);
-	undef $::Wizard_no_previous;
-	undef $::Wizard_finished;
-    } else {  $::isStandalone and $in->ask_warn('', $m ); }
-
-  step_5:
-
-    $network_configured or network::configureNetwork2($in, $prefix, $netc, $intf);
-
-    if ($netcnx->{type} =~ /modem/ || $netcnx->{type} =~ /isdn_external/) {
-	output "$prefix$connect_prog",
-	  qq(
-#!/bin/bash
-if [ -n "\$DISPLAY" ]; then
-if [ -e /usr/bin/kppp ]; then
-/sbin/route del default
-/usr/bin/kppp &
-else
-/usr/sbin/net_monitor --connect
-fi
-else
-$connect_file
-fi
-);
-    } elsif ($netcnx->{type}) {
-	output "$prefix$connect_prog",
-	  qq(
-#!/bin/bash
-if [ -n "\$DISPLAY" ]; then
-/usr/sbin/net_monitor --connect
-else
-$connect_file
-fi
-);
-    } else {
-	output "$prefix$connect_prog",
-	  qq(
-#!/bin/bash
-/usr/sbin/draknet
-);
-    }
-    if ($direct_net_install) {
-	output "$prefix$connect_prog",
-	  qq(
-#!/bin/bash
-if [ -n "\$DISPLAY" ]; then
-/usr/sbin/net_monitor --connect
-else
-$connect_file
-fi
-);
-    }
-    chmod 0755, "$prefix$connect_prog";
-    $netcnx->{$_}=$netc->{$_} foreach qw(NET_DEVICE NET_INTERFACE);
-
-    $netcnx->{NET_INTERFACE} and set_net_conf($netcnx, $netc);
-    $netcnx->{type} =~ /adsl/ or system("/sbin/chkconfig --del adsl 2> /dev/null");
-    save_conf($netcnx, $netc, $intf);
-
-#-    if ($netc->{NET_DEVICE} and $netc->{NETWORKING} ne 'no' and $::isStandalone and $::expert) {
-#-	  exists $netc->{nb_cards} or do {
-#-	      any::load_category($in, 'network/main|usb', !$::expert, 1);
-#-	      $netc->{nb_cards} = listlength(detect_devices::getNet());
-#-	  };
-#-	  ($netc->{nb_cards} - $netc->{minus_one} - (get_net_device($prefix) =~ /eth.+/ ? 1 : 0) > 0) and $in->ask_okcancel(_("Network Configuration"),
-#-_("Now that your Internet connection is configured,
-#-your computer can be configured to share its Internet connection.
-#-Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
-#-
-#-Would you like to setup the Internet Connection Sharing?
-#-"), 1) and system("/usr/sbin/drakgw --direct");
-#-    }
-}
-
-sub save_conf {
-    my ($netcnx, $netc, $intf)=@_;
-    my $adsl;
-    my $modem;
-    my $isdn;
-    $netcnx->{type} =~ /adsl/ and $adsl=$netcnx->{$netcnx->{type}};
-    $netcnx->{type} eq 'isdn_external' || $netcnx->{type} eq 'modem' and $modem=$netcnx->{$netcnx->{type}};
-    $netcnx->{type} eq 'isdn_internal' and $isdn=$netcnx->{$netcnx->{type}};
-    modules::load_category('network/main|usb');
-    require network::ethernet;
-    network::ethernet->import;
-    my @all_cards = conf_network_card_backend ($netc, $intf, undef, undef, undef, undef);
-
-    $intf = { %$intf };
-
-    output("$prefix/etc/sysconfig/network-scripts/draknet_conf",
-      "SystemName=" . do { $netc->{HOSTNAME} =~ /([^\.]*)\./; $1 } . "
-DomainName=" . do { $netc->{HOSTNAME} =~ /\.(.*)/; $1 } . "
-InternetAccessType=" . do { if ($netcnx->{type}) { $netcnx->{type}; } else { $netc->{GATEWAY} ? "lan" : ""; } } . "
-InternetInterface=" . ($netc->{GATEWAY} && (!$netcnx->{type} || $netcnx->{type} eq 'lan') ? $netc->{NET_DEVICE} : $netcnx->{NET_INTERFACE}) . "
-InternetGateway=$netc->{GATEWAY}
-DNSPrimaryIP=$netc->{dnsServer}
-DNSSecondaryIP=$netc->{dnsServer2}
-DNSThirdIP=$netc->{dnsServer3}
-AdminInterface=
-
-" . join ('', map {
-"Eth${_}Known=" . ($intf->{"eth$_"}->{DEVICE} eq "eth$_" ? 'true' : 'false') . "
-Eth${_}IP=" . $intf->{"eth$_"}{IPADDR} . "
-Eth${_}Mask=" . $intf->{"eth$_"}{NETMASK} . "
-Eth${_}Mac=
-Eth${_}BootProto=" . $intf->{"eth$_"}{BOOTPROTO} . "
-Eth${_}OnBoot=" . $intf->{"eth$_"}{ONBOOT} . "
-Eth${_}Hostname=$netc->{HOSTNAME}
-Eth${_}HostAlias=" . do { $netc->{HOSTNAME} =~ /([^\.]*)\./; $1 } . "
-Eth${_}Driver=$all_cards[$_]->[1]
-Eth${_}Irq=
-Eth${_}Port=
-Eth${_}DHCPClient=" . ($intf->{"eth$_"}{BOOTPROTO} eq 'dhcp' ? $netcnx->{dhcp_client} : '') . "
-Eth${_}DHCPServerName=" . ($intf->{"eth$_"}{BOOTPROTO} eq 'dhcp' ? $netc->{HOSTNAME} : '') . "\n"
- } (0..9)) .
-"
-
-ISDNDriver=$isdn->{driver}
-ISDNDeviceType=$isdn->{type}
-ISDNIrq=$isdn->{irq}
-ISDNMem=$isdn->{mem}
-ISDNIo=$isdn->{io}
-ISDNIo0=$isdn->{io0}
-ISDNIo1=$isdn->{io1}
-ISDNProtocol=$isdn->{protocol}
-ISDNCardDescription=$isdn->{description}
-ISDNCardVendor=$isdn->{vendor}
-ISDNId=$isdn->{id}
-ISDNProvider=$netc->{DOMAINNAME2}
-ISDNProviderPhone=$isdn->{phone_out}
-ISDNProviderDomain=" . do { $netc->{DOMAINNAME2} =~ /\.(.*)/; $1} . "
-ISDNProviderDNS1=$netc->{dnsServer2}
-ISDNProviderDNS2=$netc->{dnsServer3}
-ISDNDialing=$isdn->{dialing_mode}
-ISDNSpeed=$isdn->{speed}
-ISDNTimeout=$isdn->{huptimeout}
-ISDNHomePhone=$isdn->{phone_in}
-ISDNLogin=$isdn->{login}
-ISDNPassword=$isdn->{passwd}
-ISDNConfirmPassword=$isdn->{passwd2}
-
-PPPInterfacesList=
-PPPDevice=$modem->{device}
-PPPDeviceSpeed=
-PPPConnectionName=$modem->{connection}
-PPPProviderPhone=$modem->{phone}
-PPPProviderDomain=$modem->{domain}
-PPPProviderDNS1=$modem->{dns1}
-PPPProviderDNS2=$modem->{dns2}
-PPPLogin=$modem->{login}
-PPPPassword=$modem->{passwd}
-PPPConfirmPassword=$modem->{passwd}
-PPPAuthentication=$modem->{auth}
-PPPSpecialCommand=" . ($netcnx->{type} eq 'isdn_external' ? $netcnx->{isdn_external}{special_command} : '' ) . "
-
-ADSLInterfacesList=
-ADSLModem=" .  q( # Obsolete information. Please don't use it.) . "
-ADSLType=" . ($netcnx->{type} =~ /adsl/ ? $netcnx->{type} : '') . "
-ADSLProviderDomain=$netc->{DOMAINNAME2}
-ADSLProviderDNS1=$netc->{dnsServer2}
-ADSLProviderDNS2=$netc->{dnsServer3}
-ADSLLogin=$adsl->{login}
-ADSLPassword=$adsl->{passwd}
-DOMAINNAME2=$netc->{DOMAINNAME2}"
-	  );
-    chmod 0600, "$prefix/etc/sysconfig/network-scripts/draknet_conf";
-    my $a = $netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default";
-    cp_af("$prefix/etc/sysconfig/network-scripts/draknet_conf", "$prefix/etc/sysconfig/network-scripts/draknet_conf." . $a);
-    chmod 0600, "$prefix/etc/sysconfig/network-scripts/draknet_conf";
-    chmod 0600, "$prefix/etc/sysconfig/network-scripts/draknet_conf." . $a;
-    foreach ( ["$prefix$connect_file", "up"],
-	      ["$prefix$disconnect_file", "down"],
-	      ["$prefix$connect_prog", "prog"],
-	      ["$prefix/etc/ppp/ioptions1B", "iop1B"],
-	      ["$prefix/etc/ppp/ioptions2B", "iop2B"],
-	      ["$prefix/etc/isdn/isdn1B.conf", "isdn1B"],
-	      ["$prefix/etc/isdn/isdn2B.conf", "isdn2B"],
-	      ["$prefix/etc/resolv.conf", "resolv"],
-	      ["$prefix/etc/ppp/peers/adsl", "speedtouch"],
-	    ) {
-	my $file = "$prefix/etc/sysconfig/network-scripts/net_" . $_->[1] . "." . $a;
-	-e ($_->[0]) and cp_af($_->[0], $file) and chmod 0755, $file;
-    }
-}
-
-sub set_profile {
-    my ($netcnx, $profile) = @_;
-    $profile ||= $netcnx->{PROFILE};
-    $profile or return;
-    my $f = "$prefix/etc/sysconfig/network-scripts/draknet_conf";
-    -e ($f . "." . $profile) or return;
-    $netcnx->{PROFILE}=$profile;
-    cp_af($f . "." . $profile, $f);
-    foreach ( ["$prefix$connect_file", "up"],
-	      ["$prefix$disconnect_file", "down"],
-	      ["$prefix$connect_prog", "prog"],
-	      ["$prefix/etc/ppp/ioptions1B", "iop1B"],
-	      ["$prefix/etc/ppp/ioptions2B", "iop2B"],
-	      ["$prefix/etc/isdn/isdn1B.conf", "isdn1B"],
-	      ["$prefix/etc/isdn/isdn2B.conf", "isdn2B"],
-	      ["$prefix/etc/resolv.conf", "resolv"],
-	      ["$prefix/etc/ppp/peers/adsl", "speedtouch"],
-	    ) {
-	my $c = "$prefix/etc/sysconfig/network-scripts/net_" . $_->[1] . "." . $profile;
-	-e ($c) and cp_af($c, $_->[0]);
-    }
-}
-
-sub del_profile {
-    my ($netcnx, $profile) = @_;
-    $profile or return;
-    $profile eq "default" and return;
-    rm_rf("$prefix/etc/sysconfig/network-scripts/draknet_conf." . $profile);
-    rm_rf(glob_("$prefix/etc/sysconfig/network-scripts/net_{up,down,prog,iop1B,iop2B,isdn1B,isdn2B,resolv,speedtouch}." . $profile));
-}
-
-sub add_profile {
-    my ($netcnx, $profile) = @_;
-    $profile or return;
-    $profile eq "default" and return;
-    my $cmd1 = "$prefix/etc/sysconfig/network-scripts/draknet_conf." . ($netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default");
-    my $cmd2 = "$prefix/etc/sysconfig/network-scripts/draknet_conf." . $profile;
-    cp_af($cmd1, $cmd2);
-}
-
-sub get_profiles {
-    my @a;
-    my $i=0;
-    foreach (glob("/etc/sysconfig/network-scripts/draknet_conf.*")) {
-	s/.*\.//;
-	$a[$i] = $_;
-	$i++;
-    }
-    @a;
-}
-
-sub load_conf {
-    my ($netcnx, $netc, $intf)=@_;
-    my $adsl_pptp={};
-    my $adsl_pppoe={};
-    my $modem={};
-    my $isdn_external={};
-    my $isdn={};
-    my $system_name;
-    my $domain_name;
-
-    if (-e "$prefix/etc/sysconfig/network-scripts/draknet_conf") {
-	foreach (cat_("$prefix/etc/sysconfig/network-scripts/draknet_conf")) {
-	    /^DNSPrimaryIP=(.*)$/ and $netc->{dnsServer} = $1;
-	    /^DNSSecondaryIP=(.*)$/ and $netc->{dnsServer2} = $1;
-	    /^DNSThirdIP=(.*)$/ and $netc->{dnsServer3} = $1;
-	    /^InternetAccessType=(.*)$/ and $netcnx->{type} = $1;
-	    /^InternetInterface=(.*)$/ and $netcnx->{NET_INTERFACE} = $1;
-	    /^InternetGateway=(.*)$/ and $netc->{GATEWAY} = $1;
-	    /^SystemName=(.*)$/ and $system_name = $1;
-	    /^DomainName=(.*)$/ and $domain_name = $1;
-	    /^Eth([0-9])Known=true$/ and $intf->{"eth$1"}->{DEVICE} = "eth$1";
-	    /^Eth([0-9])IP=(.*)$/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{IPADDR} = $2;
-	    /^Eth([0-9])Mask=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{NETMASK} = $2;
-	    /^Eth([0-9])BootProto=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{BOOTPROTO} = $2;
-	    /^Eth([0-9])OnBoot=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{ONBOOT} = $2;
-	    /^Eth([0-9])Hostname=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $netc->{HOSTNAME} = $2;
-	    /^Eth([0-9])Driver=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{driver} = $2;
-	    /^ISDNDriver=(.*)$/ and $isdn->{driver} = $1;
-	    /^ISDNDeviceType=(.*)$/ and $isdn->{type} = $1;
-	    /^ISDNIrq=(.*)/ and $isdn->{irq} = $1;
-	    /^ISDNMem=(.*)$/ and $isdn->{mem} = $1;
-	    /^ISDNIo=(.*)$/ and $isdn->{io} = $1;
-	    /^ISDNIo0=(.*)$/ and $isdn->{io0} = $1;
-	    /^ISDNIo1=(.*)$/ and $isdn->{io1} = $1;
-	    /^ISDNProtocol=(.*)$/ and $isdn->{protocol} = $1;
-	    /^ISDNCardDescription=(.*)$/ and $isdn->{description} = $1;
-	    /^ISDNCardVendor=(.*)$/ and $isdn->{vendor} = $1;
-	    /^ISDNId=(.*)$/ and $isdn->{id} = $1;
-	    /^ISDNProviderPhone=(.*)$/ and $isdn->{phone_out} = $1;
-	    /^ISDNDialing=(.*)$/ and $isdn->{dialing_mode} = $1;
-	    /^ISDNISDNSpeed=(.*)$/ and $isdn->{speed} = $1;
-	    /^ISDNTimeout=(.*)$/ and $isdn->{huptimeout} = $1;
-	    /^ISDNHomePhone=(.*)$/ and $isdn->{phone_in} = $1;
-	    /^ISDNLogin=(.*)$/ and $isdn->{login} = $1;
-	    /^ISDNPassword=(.*)$/ and $isdn->{passwd} = $1;
-	    /^ISDNConfirmPassword=(.*)$/ and $isdn->{passwd2} = $1;
-
-	    /^PPPDevice=(.*)$/ and $modem->{device} = $1;
-	    /^PPPConnectionName=(.*)$/ and $modem->{connection} = $1;
-	    /^PPPProviderPhone=(.*)$/ and $modem->{phone} = $1;
-	    /^PPPProviderDomain=(.*)$/ and $modem->{domain} = $1;
-	    /^PPPProviderDNS1=(.*)$/ and $modem->{dns1} = $1;
-	    /^PPPProviderDNS2=(.*)$/ and $modem->{dns2} = $1;
-	    /^PPPLogin=(.*)$/ and $modem->{login} = $1;
-	    /^PPPPassword=(.*)$/ and $modem->{passwd} = $1;
-	    /^PPPAuthentication=(.*)$/ and $modem->{auth} = $1;
-	    if (/^PPPSpecialCommand=(.*)$/) {
-		$netcnx->{type} eq 'isdn_external' and $netcnx->{$netcnx->{type}}{special_command} = $1;
-	    }
-	    /^ADSLLogin=(.*)$/ and $adsl_pppoe->{login} = $1;
-	    /^ADSLPassword=(.*)$/ and $adsl_pppoe->{passwd} = $1;
-	    /^DOMAINNAME2=(.*)$/ and $netc->{DOMAINNAME2} = $1;
-	}
-    }
-    $system_name && $domain_name and $netc->{HOSTNAME}=join ('.', $system_name, $domain_name);
-    $adsl_pptp->{$_}=$adsl_pppoe->{$_} foreach ('login', 'passwd', 'passwd2');
-    $isdn_external->{$_}=$modem->{$_} foreach ('device', 'connection', 'phone', 'domain', 'dns1', 'dns2', 'login', 'passwd', 'auth');
-    $netcnx->{adsl_pptp}=$adsl_pptp;
-    $netcnx->{adsl_pppoe}=$adsl_pppoe;
-    $netcnx->{modem}=$modem;
-    $netcnx->{modem}=$isdn_external;
-    $netcnx->{isdn_internal}=$isdn;
-    -e "$prefix/etc/sysconfig/network" and put_in_hash($netc,network::read_conf("$prefix/etc/sysconfig/network"));
-    foreach (glob_("$prefix/etc/sysconfig/ifcfg-*")) {
-	my $l = network::read_interface_conf($_);
-	$intf->{$l->{DEVICE}} = $l;
-    }
-    my $file = "$prefix/etc/resolv.conf";
-    if (-e $file) {
-	put_in_hash($netc, network::read_resolv_conf($file));
-    }
-}
-
-sub get_net_device {
-    ${{ getVarsFromSh("/etc/sysconfig/draknet") }}{NET_DEVICE};
-}
-
-sub read_net_conf {
-    my ($prefix, $netcnx, $netc)=@_;
-    add2hash($netcnx, { getVarsFromSh("$prefix/etc/sysconfig/draknet") });
-    $netc->{$_} = $netcnx->{$_} foreach 'NET_DEVICE', 'NET_INTERFACE';
-    $netcnx->{$netcnx->{type}}||={};
-    add2hash($netcnx->{$netcnx->{type}}, { getVarsFromSh("$prefix/etc/sysconfig/draknet." . $netcnx->{type}) });
-}
-
-sub set_net_conf {
-    my ($netcnx, $netc)=@_;
-    setVarsInShMode("$prefix/etc/sysconfig/draknet", 0600, $netcnx, "NET_DEVICE", "NET_INTERFACE", "type", "PROFILE" );
-    setVarsInShMode("$prefix/etc/sysconfig/draknet." . $netcnx->{type}, 0600, $netcnx->{$netcnx->{type}}); #- doesn't work, don't know why
-    setVarsInShMode("$prefix/etc/sysconfig/draknet.netc", 0600, $netc); #- doesn't work, don't know why
-}
-
-sub start_internet {
-    my ($o) = @_;
-    init_globals ($o, $o->{prefix});
-    run_program::rooted($prefix, $connect_file);
-}
-
-sub stop_internet {
-    my ($o) = @_;
-    init_globals ($o, $o->{prefix});
-    run_program::rooted($prefix, $disconnect_file);
-}
-
-#---------------------------------------------
-#                WONDERFULL pad
-#---------------------------------------------
-1;
diff --git a/perl-install/network/network.pm b/perl-install/network/network.pm
deleted file mode 100644
index 60d8ffd41..000000000
--- a/perl-install/network/network.pm
+++ /dev/null
@@ -1,460 +0,0 @@
-package network::network; # $Id$wir
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use Socket;
-
-use common;
-use detect_devices;
-use run_program;
-use any;
-use log;
-use vars qw(@ISA @EXPORT);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(resolv configureNetworkIntf netmask dns is_ip masked_ip findIntf addDefaultRoute all write_interface_conf read_all_conf dnsServers guessHostname configureNetworkNet read_resolv_conf getVarsFromSh read_interface_conf add2hosts gateway configureNetwork2 write_conf sethostname miscellaneousNetwork down_it read_conf write_resolv_conf up_it);
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub read_conf {
-    my ($file) = @_;
-    my %netc = getVarsFromSh($file);
-    \%netc;
-}
-
-sub read_resolv_conf {
-    my ($file) = @_;
-    my @l = qw(dnsServer dnsServer2 dnsServer3);
-    my %netc;
-
-    local *F; open F, $file or die "cannot open $file: $!";
-    local $_;
-    while (<F>) {
-	/^\s*nameserver\s+(\S+)/ and $netc{shift @l} = $1;
-    }
-    \%netc;
-}
-
-sub read_interface_conf {
-    my ($file) = @_;
-    my %intf = getVarsFromSh($file) or die "cannot open file $file: $!";
-
-    $intf{BOOTPROTO} ||= 'static';
-    $intf{isPtp} = $intf{NETWORK} eq '255.255.255.255';
-    $intf{isUp} = 1;
-    \%intf;
-}
-
-sub up_it {
-    my ($prefix, $intfs) = @_;
-    $_->{isUp} and return foreach values %$intfs;
-    my $f = "/etc/resolv.conf"; symlink "$prefix/$f", $f;
-    run_program::rooted($prefix, "/etc/rc.d/init.d/network", "start");
-    $_->{isUp} = 1 foreach values %$intfs;
-}
-
-sub down_it {
-    my ($prefix, $intfs) = @_;
-    run_program::rooted($prefix, "/etc/rc.d/init.d/network", "stop");
-    $_->{isUp} = 1 foreach values %$intfs;
-}
-
-sub write_conf {
-    my ($file, $netc) = @_;
-
-    if ($netc->{HOSTNAME}) {
-	$netc->{HOSTNAME} =~ /\.(.*)$/;
-	$1 and $netc->{DOMAINNAME} = $1;
-    }
-    ($netc->{DOMAINNAME}) ||= 'localdomain';
-    add2hash($netc, {
-		     NETWORKING => "yes",
-		     FORWARD_IPV4 => "false",
-		     HOSTNAME => "localhost.$netc->{DOMAINNAME}",
-		    });
-
-    setVarsInSh($file, $netc, qw(NETWORKING FORWARD_IPV4 DHCP_HOSTNAME HOSTNAME DOMAINNAME GATEWAY GATEWAYDEV NISDOMAIN));
-}
-
-sub write_resolv_conf {
-    my ($file, $netc) = @_;
-
-    #- get the list of used dns.
-    my %used_dns; @used_dns{$netc->{dnsServer}, $netc->{dnsServer2}, $netc->{dnsServer3}} = (1, 2, 3);
-
-    unless ($netc->{DOMAINNAME} || $netc->{DOMAINNAME2} || keys %used_dns > 0) {
-	unlink($file);
-	log::l("neither domain name nor dns server are configured");
-	return 0;
-    }
-
-    my (%search, %dns, @unknown);
-    local *F; open F, $file;
-    local $_;
-#-    my $options;
-    while (<F>) {
-#-	if (/^[\s]*(options\s+[^#]*).*$/) { $options = $1; $options =~ s/timeout:\d+/timeout:1/; next }
-	/^[#\s]*search\s+(.*?)\s*$/ and $search{$1} = $., next;
-	/^[#\s]*nameserver\s+(.*?)\s*$/ and $dns{$1} = $., next;
-	/^.*# ppp temp entry\s*$/ and next;
-	/^[#\s]*(\S.*?)\s*$/ and push @unknown, $1;
-    }
-#-    $options ||= "options timeout:1";
-
-    close F; open F, ">$file" or die "cannot write $file: $!";
-    print F "# search $_\n" foreach grep { $_ ne "$netc->{DOMAINNAME} $netc->{DOMAINNAME2}" } sort { $search{$a} <=> $search{$b} } keys %search;
-    print F "search $netc->{DOMAINNAME} $netc->{DOMAINNAME2}\n" if ($netc->{DOMAINNAME} || $netc->{DOMAINNAME2});
-#-    print F "$options\n\n";
-    print F "# nameserver $_\n" foreach grep { ! exists $used_dns{$_} } sort { $dns{$a} <=> $dns{$b} } keys %dns;
-    print F "nameserver $_\n" foreach  sort { $used_dns{$a} <=> $used_dns{$b} } grep { $_ } keys %used_dns;
-    print F "\n";
-    print F "# $_\n" foreach @unknown;
-    print F "\n";
-    print F "# ppp temp entry\n";
-
-    #-res_init();		# reinit the resolver so DNS changes take affect
-    1;
-}
-
-sub write_interface_conf {
-    my ($file, $intf, $prefix) = @_;
-
-    my @ip = split '\.', $intf->{IPADDR};
-    my @mask = split '\.', $intf->{NETMASK};
-    my $hwaddr;
-    $::o->{miscellaneous}{track_network_id} and $hwaddr = -e "$prefix/sbin/ip" && `LC_ALL= LANG= $prefix/sbin/ip -o link show $intf->{DEVICE} 2>/dev/null`;
-    if ($hwaddr) { chomp $hwaddr; $hwaddr =~ s/.*link\/ether\s([0-9a-z:]+)\s.*/$1/; }
-    $hwaddr and $intf->{HWADDR} = undef;
-    add2hash($intf, {
-		     BROADCAST => join('.', mapn { int $_[0] | ~int $_[1] & 255 } \@ip, \@mask),
-		     NETWORK   => join('.', mapn { int $_[0] &      $_[1]       } \@ip, \@mask),
-		     ONBOOT => bool2yesno(!member($intf->{DEVICE}, map { $_->{device} } detect_devices::probeall())),
-		     if_($::o->{miscellaneous}{track_network_id}, HWADDR => $hwaddr)
-		    });
-    setVarsInSh($file, $intf, qw(DEVICE BOOTPROTO IPADDR NETMASK NETWORK BROADCAST ONBOOT HWADDR), ($intf->{wireless_eth}) ? qw(WIRELESS_MODE WIRELESS_ESSID WIRELESS_NWID WIRELESS_FREQ WIRELESS_SENS WIRELESS_RATE WIRELESS_ENC_KEY WIRELESS_RTS WIRELESS_FRAG WIRELESS_IWCONFIG WIRELESS_IWSPY WIRELESS_IWPRIV) : ());
-}
-
-sub add2hosts {
-    my ($file, $hostname, @ips) = @_;
-    my %l;
-    $l{$_} = $hostname foreach @ips;
-
-    local *F;
-    if (-e $file) {
-	open F, $file or die "cannot open $file: $!";
-	/\s*(\S+)(.*)/ and $l{$1} ||= $2 foreach <F>;
-    }
-    log::l("writing host information to $file");
-    open F, ">$file" or die "cannot write $file: $!";
-    while (my ($ip, $v) = each %l) {
-	$ip or next;
-	print F "$ip";
-	if ($v =~ /^\s/) {
-	    print F $v;
-	} else {
-	    print F "\t\t$v";
-	    print F " $1" if $v =~ /(.*?)\./;
-	}
-	print F "\n";
-    }
-}
-
-# The interface/gateway needs to be configured before this will work!
-sub guessHostname {
-    my ($prefix, $netc, $intf) = @_;
-
-    $intf->{isUp} && dnsServers($netc) or return 0;
-    $netc->{HOSTNAME} && $netc->{DOMAINNAME} and return 1;
-
-    write_resolv_conf("$prefix/etc/resolv.conf", $netc);
-
-    my $name = gethostbyaddr(Socket::inet_aton($intf->{IPADDR}), AF_INET) or log::l("reverse name lookup failed"), return 0;
-
-    log::l("reverse name lookup worked");
-
-    add2hash($netc, { HOSTNAME => $name });
-    1;
-}
-
-sub addDefaultRoute {
-    my ($netc) = @_;
-    c::addDefaultRoute($netc->{GATEWAY}) if $netc->{GATEWAY};
-}
-
-sub sethostname {
-    my ($netc) = @_;
-    syscall_('sethostname', $netc->{HOSTNAME}, length $netc->{HOSTNAME}) or log::l("sethostname failed: $!");
-}
-
-sub resolv($) {
-    my ($name) = @_;
-    is_ip($name) and return $name;
-    my $a = join(".", unpack "C4", (gethostbyname $name)[4]);
-    #-log::l("resolved $name in $a");
-    $a;
-}
-
-sub dnsServers {
-    my ($netc) = @_;
-    my %used_dns; @used_dns{$netc->{dnsServer}, $netc->{dnsServer2}, $netc->{dnsServer3}} = (1, 2, 3);
-    sort { $used_dns{$a} <=> $used_dns{$b} } grep { $_ } keys %used_dns;
-}
-
-sub findIntf {
-    my ($intf, $device) = @_;
-    $intf->{$device}->{DEVICE} = $device;
-    $intf->{$device};
-}
-#PAD \s* a la fin
-my $ip_regexp = qr/^(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})$/;
-sub is_ip {
-    my ($ip) = @_;
-    return 0 unless $ip =~ $ip_regexp;
-    my @fields = ($1, $2, $3, $4);
-    foreach (@fields) {
-	return 0 if $_ < 0 || $_ > 255;
-    }
-    return 1;
-}
-
-sub netmask {
-    my ($ip) = @_;
-    return "255.255.255.0" unless is_ip($ip);
-    $ip =~ $ip_regexp;
-    if ($1 >= 1 && $1 < 127) {
-	return "255.0.0.0";    #-1.0.0.0 to 127.0.0.0
-    } elsif ($1  >= 128 && $1 <= 191 ){
-	return "255.255.0.0";  #-128.0.0.0 to 191.255.0.0
-    } elsif ($1 >= 192 && $1 <= 223) {
-	return "255.255.255.0";
-    } else {
-	return "255.255.255.255"; #-experimental classes
-    }
-}
-
-sub masked_ip {
-    my ($ip) = @_;
-    return "" unless is_ip($ip);
-    my @mask = netmask($ip) =~ $ip_regexp;
-    my @ip   = $ip          =~ $ip_regexp;
-    for (my $i = 0; $i < @ip; $i++) {
-	$ip[$i] &= int $mask[$i];
-    }
-    join(".", @ip);
-}
-
-sub dns {
-    my ($ip) = @_;
-    my $mask = masked_ip($ip);
-    my @masked = masked_ip($ip) =~ $ip_regexp;
-    $masked[3]  = 2;
-    join (".", @masked);
-
-}
-sub gateway {
-    my ($ip) = @_;
-    my @masked = masked_ip($ip) =~ $ip_regexp;
-    $masked[3]  = 1;
-    join (".", @masked);
-
-}
-
-sub configureNetworkIntf {
-    my ($netc, $in, $intf, $net_device, $skip, $module) = @_;
-    my $text;
-    my @wireless_modules = qw(aironet_cs aironet4500_cs hermes airo orinico_cs orinico airo_cs netwave_cs ray_cs wavelan_cs wvlan_cs airport);
-    my $flag = 0;
-    foreach (@wireless_modules) {
-	$module =~ /$_/ and $flag =1;
-    }
-    if ($flag) {
-	$intf->{wireless_eth} = 1;
-	$netc->{wireless_eth} = 1;
-	$intf->{WIRELESS_MODE} = "Managed";
-	$intf->{WIRELESS_ESSID} = "any";
-#-	$intf->{WIRELESS_NWID} = "";
-#-	$intf->{WIRELESS_FREQ} = "";
-#-	$intf->{WIRELESS_SENS} = "";
-#-	$intf->{WIRELESS_RATE} = "";
-#-	$intf->{WIRELESS_ENC_KEY} = "";
-#-	$intf->{WIRELESS_RTS} = "";
-#-	$intf->{WIRELESS_FRAG} = "";
-#-	$intf->{WIRELESS_IWCONFIG} = "";
-#-	$intf->{WIRELESS_IWSPY} = "";
-#-	$intf->{WIRELESS_IWPRIV} = "";
-    }
-    if ($net_device eq $intf->{DEVICE}) {
-	$skip and return 1;
-	$text = _("WARNING: this device has been previously configured to connect to the Internet.
-Simply accept to keep this device configured.
-Modifying the fields below will override this configuration.");
-    }
-    else {
-	$text = _("Please enter the IP configuration for this machine.
-Each item should be entered as an IP address in dotted-decimal
-notation (for example, 1.2.3.4).");
-    }
-    my $pump = $intf->{BOOTPROTO} =~ /^(dhcp|bootp)$/;
-    delete $intf->{NETWORK};
-    delete $intf->{BROADCAST};
-    my $onboot = 1;
-    my @fields = qw(IPADDR NETMASK);
-    $::isStandalone or $in->set_help('configureNetworkIP');
-    $in->ask_from(_("Configuring network device %s", $intf->{DEVICE}),
-  	          (_("Configuring network device %s", $intf->{DEVICE}) . ( $module ? _(" (driver %s)", $module) : '' ) ."\n\n") .
-	          $text,
-	         [ { label => _("IP address"), val => \$intf->{IPADDR}, disabled => sub { $pump } },
-	           { label => _("Netmask"),     val => \$intf->{NETMASK}, disabled => sub { $pump } },
-	           { label => _("Automatic IP"), val => \$pump, type => "bool", text => _("(bootp/dhcp)") },
-	           if_($::expert, { label => _("Start at boot"), val => \$onboot, type => "bool" }),
-		   if_($intf->{wireless_eth},
-	           { label => "WIRELESS_MODE", val => \$intf->{WIRELESS_MODE}, list => [ "Ad-hoc", "Managed", "Master", "Repeater", "Secondary", "Auto"] },
-	           { label => "WIRELESS_ESSID", val => \$intf->{WIRELESS_ESSID} },
-	           { label => "WIRELESS_NWID", val => \$intf->{WIRELESS_NWID} },
-	           { label => "WIRELESS_FREQ", val => \$intf->{WIRELESS_FREQ} },
-	           { label => "WIRELESS_SENS", val => \$intf->{WIRELESS_SENS} },
-	           { label => "WIRELESS_RATE", val => \$intf->{WIRELESS_RATE} },
-	           { label => "WIRELESS_ENC_KEY", val => \$intf->{WIRELESS_ENC_KEY} },
-	           { label => "WIRELESS_RTS", val => \$intf->{WIRELESS_RTS} },
-	           { label => "WIRELESS_FRAG", val => \$intf->{WIRELESS_FRAG} },
-	           { label => "WIRELESS_IWCONFIG", val => \$intf->{WIRELESS_IWCONFIG} },
-	           { label => "WIRELESS_IWSPY", val => \$intf->{WIRELESS_IWSPY} },
-	           { label => "WIRELESS_IWPRIV", val => \$intf->{WIRELESS_IWPRIV} }
-	           ),
-	         ],
-	         complete => sub {
-	         	 $intf->{BOOTPROTO} = $pump ? "dhcp" : "static";
-	         	 return 0 if $pump;
-	         	 for (my $i = 0; $i < @fields; $i++) {
-	         	     unless (is_ip($intf->{$fields[$i]})) {
-	         		 $in->ask_warn('', _("IP address should be in format 1.2.3.4"));
-	         		 return (1,$i);
-	         	     }
-	         	     return 0;
-	         	 }
-	         	 if ($intf->{WIRELESS_FREQ} !~ /[0-9.]*[kGM]/) {
-	         	     $in->ask_warn('', _('Freq should have the suffix k, M or G (for example, "2.46G" for 2.46 GHz frequency), or add enough \'0\'.'));
-	         	     return (1,6);
-	         	 }
-	         	 if ($intf->{WIRELESS_RATE} !~ /[0-9.]*[kGM]/) {
-	         	     $in->ask_warn('', _('Rate should have the suffix k, M or G (for example, "11M" for 11M), or add enough \'0\'.'));
-	         	     return (1,8);
-	         	 }
-	         },
-	         focus_out => sub {
-	         	 $intf->{NETMASK} ||= netmask($intf->{IPADDR}) unless $_[0]
-	         }
-    	    );
-    $intf->{ONBOOT} = bool2yesno($onboot);
-}
-
-sub configureNetworkNet {
-    my ($in, $netc, $intf, @devices) = @_;
-
-    $netc->{dnsServer} ||= dns($intf->{IPADDR});
-    my $gateway_ex = gateway($intf->{IPADDR});
-#-    $netc->{GATEWAY}   ||= gateway($intf->{IPADDR});
-
-    $::isInstall and $in->set_help('configureNetworkHost');
-    $in->ask_from(_("Configuring network"),
-_("Please enter your host name.
-Your host name should be a fully-qualified host name,
-such as ``mybox.mylab.myco.com''.
-You may also enter the IP address of the gateway if you have one"),
-			       [ { label => _("Host name"), val => \$netc->{HOSTNAME} },
-				 { label => _("DNS server"), val => \$netc->{dnsServer} },
-				 { label => _("Gateway (e.g. %s)", $gateway_ex), val => \$netc->{GATEWAY} },
-				    if_(@devices > 1,
-				 { label => _("Gateway device"), val => \$netc->{GATEWAYDEV}, list => \@devices },
-				    ),
-			       ],
-			      );
-}
-
-sub miscellaneousNetwork {
-    my ($in, $clicked, $no_track_net) = @_;
-    my $u = $::o->{miscellaneous} ||= {};
-    $::isInstall and $in->set_help('configureNetworkProxy');
-    $u->{track_network_id} = detect_devices::isLaptop();
-    $::expert || $clicked and $in->ask_from('',
-       _("Proxies configuration"),
-       [ { label => _("HTTP proxy"), val => \$u->{http_proxy} },
-         { label => _("FTP proxy"),  val => \$u->{ftp_proxy} },
-	 if_(!$no_track_net, { label => _("Track network card id (useful for laptops)"), val => \$u->{track_network_id}, type => "bool" }),
-       ],
-       complete => sub {
-	   $u->{http_proxy} =~ m,^($|http://), or $in->ask_warn('', _("Proxy should be http://...")), return 1,0;
-	   $u->{ftp_proxy} =~ m,^($|ftp://), or $in->ask_warn('', _("Proxy should be ftp://...")), return 1,1;
-	   0;
-       }
-    ) || return;
-}
-
-sub read_all_conf {
-    my ($prefix, $netc, $intf) = @_;
-    $netc ||= {}; $intf ||= {};
-    add2hash($netc, read_conf("$prefix/etc/sysconfig/network")) if -r "$prefix/etc/sysconfig/network";
-    add2hash($netc, read_resolv_conf("$prefix/etc/resolv.conf")) if -r "$prefix/etc/resolv.conf";
-    foreach (all("$prefix/etc/sysconfig/network-scripts")) {
-	if (/ifcfg-(\w+)/ && $1 ne 'lo' && $1 !~ /ppp/) {
-	    my $intf = findIntf($intf, $1);
-	    add2hash($intf, { getVarsFromSh("$prefix/etc/sysconfig/network-scripts/$_") });
-	}
-    }
-}
-
-#- configureNetwork2 : configure the network interfaces.
-#- input
-#-  $prefix
-#-  $netc
-#-  $intf
-#- $netc input
-#-  NETWORKING : networking flag : string : "yes" by default
-#-  FORWARD_IPV4 : forward IP flag : string : "false" by default
-#-  HOSTNAME : hostname : string : "localhost.localdomain" by default
-#-  DOMAINNAME : domainname : string : $netc->{HOSTNAME} =~ /\.(.*)/ by default
-#-  DOMAINNAME2 : well it's another domainname : have to look further why we used 2
-#-  The following are facultatives
-#-  DHCP_HOSTNAME : If you have a dhcp and want to set the hostname
-#-  GATEWAY : gateway
-#-  GATEWAYDEV : gateway interface
-#-  NISDOMAIN : nis domain
-#-  $netc->{dnsServer} : dns server 1
-#-  $netc->{dnsServer2} : dns server 2
-#-  $netc->{dnsServer3} : dns server 3 : note that we uses the dns1 for the LAN, and the 2 others for the internet conx
-#- $intf input: for each $device (for example ethx)
-#-  $intf->{$device}{IPADDR} : IP address
-#-  $intf->{$device}{NETMASK} : netmask
-#-  $intf->{$device}{DEVICE} : DEVICE = $device
-#-  $intf->{$device}{BOOTPROTO} : boot prototype : "bootp" or "dhcp" or "pump" or ...
-sub configureNetwork2 {
-    my ($in, $prefix, $netc, $intf) = @_;
-    my $etc = "$prefix/etc";
-
-    $netc->{wireless_eth} and $in->do_pkgs->install(qw(wireless-tools));
-    write_conf("$etc/sysconfig/network", $netc);
-    write_resolv_conf("$etc/resolv.conf", $netc);
-    write_interface_conf("$etc/sysconfig/network-scripts/ifcfg-$_->{DEVICE}", $_, $prefix) foreach grep { $_->{DEVICE} } values %$intf;
-    add2hosts("$etc/hosts", $netc->{HOSTNAME}, map { $_->{IPADDR} } values %$intf);
-
-    if (grep { $_->{BOOTPROTO} =~ /^(dhcp)$/ } values %$intf) {
-	$in->do_pkgs->install($netc->{dhcp_client} ? $netc->{dhcp_client} : 'dhcpcd');
-    }
-    if (grep { $_->{BOOTPROTO} =~ /^(pump|bootp)$/ } values %$intf) {
-	$in->do_pkgs->install('pump');
-    }
-    #-res_init();		#- reinit the resolver so DNS changes take affect
-
-    any::miscellaneousNetwork($prefix);
-}
-
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/network/nfs.pm b/perl-install/network/nfs.pm
deleted file mode 100644
index 58b2dab28..000000000
--- a/perl-install/network/nfs.pm
+++ /dev/null
@@ -1,66 +0,0 @@
-package network::nfs; # $Id$
-
-use strict;
-use diagnostics;
-
-use common;
-use network::network;
-use network::smbnfs;
-use log;
-
-our @ISA = 'network::smbnfs';
-
-sub to_fstab_entry {
-    my ($class, $e) = @_;
-    $class->to_fstab_entry_raw($e, 'nfs');
-}
-sub comment_to_string {
-    my ($class, $comment) = @_;
-    member($comment, qw(* 0.0.0.0/0.0.0.0 (everyone))) ? '' : $comment;
-}
-sub from_dev { 
-    my ($class, $dev) = @_;
-    $dev =~ m|(.*?):(.*)|;
-}
-sub to_dev_raw {
-    my ($class, $server, $name) = @_;
-    $server . ':' . $name;
-}
-
-sub check {
-    my ($class, $in) = @_;
-    $class->raw_check($in, 'nfs-utils-clients', '/usr/sbin/showmount');
-}
-
-sub find_servers {
-    local *F;
-    my $pid = open F, "rpcinfo-flushed -b mountd 2 |";
-    $SIG{ALRM} = sub { kill(15, $pid) };
-    alarm 1;
-
-    my $domain = chomp_(`domainname`);
-    my @servers;
-    while (<F>) {
-	chomp;
-	my ($ip, $name) = /(\S+)\s+(\S+)/ or log::l("bad line in rpcinfo output"), next;
-	$name =~ s/\Q.$domain//; 
-	$name =~ s/\.$//;
-	push @servers, { ip => $ip, if_($name ne '(unknown)', name => $name) };
-    }
-    @servers;
-}
-
-sub find_exports {
-    my ($class, $server) = @_;
-
-    local *F;
-    my $s = $server->{ip} || $server->{name};
-    my $pid = open F, "showmount -e $s |";
-    $SIG{ALRM} = sub { kill(15, $pid) };
-    alarm 5;
-
-    my (undef, @l) = <F>;
-    map { /(\S+)\s*(\S+)/; { name => $1, comment => $2, server => $server } } @l;
-}
-
-1;
diff --git a/perl-install/network/smb.pm b/perl-install/network/smb.pm
deleted file mode 100644
index d212f5122..000000000
--- a/perl-install/network/smb.pm
+++ /dev/null
@@ -1,150 +0,0 @@
-package network::smb; # $Id$
-
-use strict;
-use diagnostics;
-
-use common;
-use fs;
-use network::network;
-use network::smbnfs;
-
-
-our @ISA = 'network::smbnfs';
-
-sub to_fstab_entry {
-    my ($class, $e) = @_;
-    my $part = $class->to_fstab_entry_raw($e, 'smbfs');
-    if ($e->{server}{username}) {
-	my ($options, $unknown) = fs::mount_options_unpack($part);
-	$options->{"$_="} = $e->{server}{$_} foreach qw(username password domain);
-	fs::mount_options_pack($part, $options, $unknown);
-    }
-    $part;
-}
-sub from_dev { 
-    my ($class, $dev) = @_;
-    $dev =~ m|//(.*?)/(.*)|;
-}
-sub to_dev_raw {
-    my ($class, $server, $name) = @_;
-    '//' . $server . '/' . $name;
-}
-
-sub check {
-    my ($class, $in) = @_;
-    $class->raw_check($in, 'samba-client', '/usr/bin/nmblookup');
-}
-
-sub smbclient {
-    my ($server) = @_;
-    my $name  = $server->{name} || $server->{ip};
-    my $ip    = $server->{ip} ? "-I $server->{ip}" : '';
-    my $group = $server->{group} ? " -W $server->{group}" : '';
-
-    my $U = $server->{username} ? "$server->{domain}/$server->{username}%$server->{password}" : '%';
-    `smbclient -U $U -L $name $ip$group`;
-}
-
-sub find_servers {
-    my (undef, @l) = `nmblookup "*"`;
-    s/\s.*\n// foreach @l;
-    my @servers = grep { network::network::is_ip($_) } @l;
-    my %servers;
-    $servers{$_}{ip} = $_ foreach @servers;
-    my ($ip, $browse);
-    foreach (`nmblookup -A @servers`) {
-	my $nb = /^Looking up status of (\S+)/ .. /^$/ or next;
-	if ($nb == 1) {
-	    $ip = $1;
-	} elsif (/<00>/) {
-	    $servers{$ip}{/<GROUP>/ ? 'group' : 'name'} ||= lc first(/(\S+)/);
-	} elsif (/__MSBROWSE__/) {
-	    $browse ||= $servers{$ip};
-	}
-    }
-    if ($browse) {
-	my %l;
-	foreach (smbclient($browse)) {
-	    my $nb = /^\s*Workgroup/ .. /^$/;
-	    $nb > 2 or next;
-	    my ($group, $name) = split(' ', lc($_));
-
-	    # already done
-	    next if grep { $group eq $_->{group} } values %servers;
-
-	    $l{$name} = $group;
-	}
-	if (my @l = keys %l) {
-	    foreach (`nmblookup @l`) {
-		$servers{$1} = { name => $2, group => $l{$2} } if /(\S+)\s+([^<]+)<00>/;
-	    }
-	}
-    }
-    values %servers;
-}
-
-sub find_exports {
-    my ($class, $server) = @_;
-    my @l;
-
-    foreach (smbclient($server)) {
-	chomp;
-	s/^\t//;
-	/NT_STATUS_/ and die $_;
-	my ($name, $type, $comment) = unpack "A15 A10 A*", $_;
-	if ($name eq '---------' && $type eq '----' && $comment eq '-------' .. /^$/) {
-	    push @l, { name => $name, type => $type, comment => $comment, server => $server }
-	      if $type eq 'Disk' && $name !~ /\$$/ && $name !~ /NETLOGON|SYSVOL/;
-	}
-    }
-    @l;
-}
-
-sub authentifications_available {
-    my ($server) = @_;
-    map { if_(/^auth.\Q$server->{name}.\E(.*)/, $1) } all("/etc/samba");
-}
-
-sub to_credentials {
-    my ($server_name, $username) = @_;
-    $username or die 'to_credentials';
-    "/etc/samba/auth.$server_name.$username";
-}
-
-sub fstab_entry_to_credentials {
-    my ($part) = @_;    
-
-    my ($server_name) = network::smb->from_dev($part->{device}) or return;
-
-    my ($options, $unknown) = fs::mount_options_unpack($part);
-    $options->{'username='} && $options->{'password='} or return;
-    my %h = map { $_ => delete $options->{"$_="} } qw(username domain password);
-    $h{file} = $options->{'credentials='} = to_credentials($server_name, $h{username});
-    fs::mount_options_pack_($part, $options, $unknown), \%h;
-}
-
-sub remove_bad_credentials {
-    my ($server) = @_;
-    unlink to_credentials($server->{name}, $server->{username});
-}
-
-sub save_credentials {
-    my ($credentials) = @_;
-    my $file = $credentials->{file};
-    output($file, map { "$_ = $credentials->{$_}\n" } qw(username domain password));
-    chmod(0640, $file);
-}
-
-
-sub read_credentials_raw {
-    my ($file) = @_;
-    my %h = map { /(.*?)\s*=\s*(.*)/ } cat_($file);
-    \%h;
-}
-
-sub read_credentials {
-    my ($server, $username) = @_;
-    put_in_hash($server, read_credentials_raw(to_credentials($server->{name}, $username)));
-}
-
-1;
diff --git a/perl-install/network/smbnfs.pm b/perl-install/network/smbnfs.pm
deleted file mode 100644
index 6b55f6fd0..000000000
--- a/perl-install/network/smbnfs.pm
+++ /dev/null
@@ -1,58 +0,0 @@
-package network::smbnfs; # $Id$
-
-use strict;
-use diagnostics;
-
-use fs;
-
-
-sub new { 
-    my ($class, $v) = @_;
-    bless($v || {}, $class);
-}
-
-sub server_to_string {
-    my ($class, $server) = @_;
-    $server->{name} || $server->{ip};
-}
-sub comment_to_string {
-    my ($class, $comment) = @_;
-    $comment;
-}
-sub to_dev {
-    my ($class, $e) = @_;
-    $class->to_dev_raw($class->server_to_string($e->{server}), $e->{name} || $e->{ip});
-}
-sub to_string {
-    my ($class, $e) = @_;
-    my $comment = $class->comment_to_string($e->{comment});
-    ($e->{name} || $e->{ip}) . ($comment ? " ($comment)" : '');
-}
-
-sub to_fullstring {
-    my ($class, $e) = @_;
-    my $comment = $class->comment_to_string($e->{comment});
-    $class->to_dev($e) . ($comment ? " ($comment)" : '');
-}
-sub to_fstab_entry_raw {
-    my ($class, $e, $type) = @_;
-    my $fs_entry = { device => $class->to_dev($e), type => $type };
-    fs::set_default_options($fs_entry);
-    $fs_entry;
-}
-
-sub raw_check {
-    my ($class, $in, $pkg, $file) = @_;
-    if (! -e $file) {
-	$in->ask_okcancel('', _("The package %s needs to be installed. Do you want to install it?", $pkg), 1) or return;
-	$in->do_pkgs->install($pkg);
-    }
-    if (! -e $file) {
-	$in->ask_warn('', _("Mandatory package %s is missing", $pkg));
-	return;
-    }
-    1;
-}
-
-1;
-
diff --git a/perl-install/network/tools.pm b/perl-install/network/tools.pm
deleted file mode 100644
index ccc492395..000000000
--- a/perl-install/network/tools.pm
+++ /dev/null
@@ -1,227 +0,0 @@
-package network::tools;
-
-use common;
-use run_program;
-use c;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix $disconnect_file $connect_prog $connect_file);
-use MDK::Common::System qw(getVarsFromSh);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(write_cnx_script write_secret_backend write_initscript ask_connect_now connect_backend disconnect_backend read_providers_backend ask_info2 type2interface connected connected_bg connected2 disconnected);
-@EXPORT_OK = qw($in);
-
-sub write_cnx_script {
-    my ($netc, $type, $up, $down, $type2) = @_;
-    if ($type) {
-	$netc->{internet_cnx}{$type}{$_->[0]}=$_->[1] foreach ([$connect_file, $up], [$disconnect_file, $down]);
-	$netc->{internet_cnx}{$type}{type} = $type2;
-    } else {
-	foreach ($connect_file, $disconnect_file) {
-	    output ("$prefix$_",
-'#!/bin/bash
-' . if_(!$netc->{at_boot}, 'if [ "x$1" == "x--boot_time" ]; then exit; fi
-') . $netc->{internet_cnx}{$netc->{internet_cnx_choice}}{$_});
-	chmod 0755, "$prefix" . $_;
-	}
-    }
-}
-
-sub write_secret_backend {
-    my ($a, $b) = @_;
-    foreach my $i ("pap-secrets", "chap-secrets") {
-	substInFile { s/^'$a'.*\n//; $_ .= "\n'$a' * '$b' * \n" if eof  } "$prefix/etc/ppp/$i";
-    }
-}
-
-sub ask_connect_now {
-    my ($type) = @_;
-    $::Wizard_no_previous=1;
-    #- FIXME : code the exception to be generated by ask_yesorno, to be able to remove the $::Wizard_no_previous=1;
-    if ($in->ask_yesorno(_("Internet configuration"),
-			 _("Do you want to try to connect to the Internet now?")
-			)) {
-	my $up;
-	{
-	    my $w = $in->wait_message('', _("Testing your connection..."), 1);
-	    connect_backend();
-	    my $s = 30;
-	    $type =~ /modem/ and $s=50;
-	    $type =~ /adsl/ and $s=35;
-	    $type =~ /isdn/ and $s=20;
-	    sleep $s;
-	    my $netc = {};
-	    $up=connected();
-	}
-	my $m = $up ? (_("The system is now connected to Internet.") .
-		     if_($::isInstall, _("For security reason, it will be disconnected now.")) ) :
-		       _("The system doesn't seem to be connected to internet.
-Try to reconfigure your connection.");
-	if ($::isWizard) {
-	    $::Wizard_no_previous=1;
-	    $::Wizard_finished=1;
-	    $in->ask_okcancel(_("Network Configuration"), $m, 1);
-	    undef $::Wizard_no_previous;
-	    undef $::Wizard_finished;
-	} else {  $in->ask_warn('', $m ); }
-	$::isInstall and disconnect_backend();
-    }
-    undef $::Wizard_no_previous;
-    $up;
-}
-
-sub connect_backend { run_program::rooted($prefix, "$connect_prog &") }
-
-sub disconnect_backend { run_program::rooted($prefix, "$disconnect_file &") }
-
-sub read_providers_backend { my ($file) = @_; map { /(.*?)=>/ } catMaybeCompressed($file) }
-
-sub ask_info2 {
-    my ($cnx, $netc) = @_;
-    $::isInstall and $in->set_help('configureNetworkDNS');
-    $in->ask_from(_("Connection Configuration"),
-		  _("Please fill or check the field below"),
-		  [
-		   if__($cnx->{irq}, { label => _("Card IRQ"), val => \$cnx->{irq} })  ,
-		   if__($cnx->{mem}, { label => _("Card mem (DMA)"), val => \$cnx->{mem} }),
-		   if__($cnx->{io}, { label => _("Card IO"), val => \$cnx->{io} }),
-		   if__($cnx->{io0}, { label => _("Card IO_0"), val => \$cnx->{io0} }),
-		   if__($cnx->{io1}, { label => _("Card IO_1"), val => \$cnx->{io1} }),
-		   if__($cnx->{phone_in}, { label => _("Your personal phone number"), val => \$cnx->{phone_in} }),
-		   if__($netc->{DOMAINNAME2}, { label => _("Provider name (ex provider.net)"), val => \$netc->{DOMAINNAME2} }),
-		   if__($cnx->{phone_out}, { label => _("Provider phone number"), val => \$cnx->{phone_out} }),
-		   if__($netc->{dnsServer2}, { label => _("Provider dns 1 (optional)"), val => \$netc->{dnsServer2} }),
-		   if__($netc->{dnsServer3}, { label => _("Provider dns 2 (optional)"), val => \$netc->{dnsServer3} }),
-		   if__($cnx->{vpivci}, { label => _("Choose your country"), val => \$netc->{vpivci}, list => detect_timezone() }),
-		   if__($cnx->{dialing_mode}, { label => _("Dialing mode"), val => \$cnx->{dialing_mode},list=>["auto","manual"]}),
-		   if__($cnx->{speed}, { label => _("Connection speed"), val => \$cnx->{speed}, list => ["64 Kb/s", "128 Kb/s"]}),
-		   if__($cnx->{huptimeout}, { label => _("Connection timeout (in sec)"), val => \$cnx->{huptimeout} }),
-		   if__($cnx->{login}, { label => _("Account Login (user name)"), val => \$cnx->{login} }),
-		   if__($cnx->{passwd}, { label => _("Account Password"),  val => \$cnx->{passwd} }),
-		  ]
-		 ) or return;
-    if ($netc->{vpivci}) {
-	foreach (['Netherlands', '8_48'], ['France', '8_35'], ['Belgium', '8_35'], ['Italy', '8_35'], ['UK', '0_38'], ['USA', '8_35']) {
-	    $netc->{vpivci} eq $_->[0] and $netc->{vpivci} = $_->[1];
-	}
-    }
-    1;
-}
-
-sub detect_timezone {
-    my %tmz2country = ( 
-		       'Europe/Paris' => _("France"),
-		       'Europe/Amsterdam' => _("Netherlands"),
-		       'Europe/Rome' => _("Italy"),
-		       'Europe/Brussels' => _("Belgium"), 
-		       'America/New_York' => _("United States"),
-		       'Europe/London' => _("United Kingdom") 
-		      );
-    my %tm_parse = MDK::Common::System::getVarsFromSh('/etc/sysconfig/clock');
-    foreach (keys %tmz2country) {
-	if ($_ eq $tm_parse{ZONE}) {
-	    unshift @country, $tmz2country{$_};
-	} else { push @country, $tmz2country{$_} };
-    }
-    \@country;
-}
-
-sub type2interface {
-    my ($i) = @_;
-    $i=~/$_->[0]/ and return $_->[1] foreach (
-					      [ modem => 'ppp'],
-					      [ isdn_internal => 'ippp'],
-					      [ isdn_external => 'ppp'],
-					      [ adsl => 'ppp'],
-					      [ cable => 'eth'],
-					      [ lan => 'eth']);
-}
-
-sub connected { gethostbyname("mandrakesoft.com") ? 1 : 0 }
-
-my $kid_pipe;
-sub connected_bg {
-    local $|=1;
-    my ($ref) = @_;
-    if (defined $kid_pipe) {
-	local *F;
-	*F = *$kid_pipe;
-	fcntl(F, c::F_SETFL(), c::O_NONBLOCK()) or die "can't fcntl F_SETFL: $!";
-	my $a;
-  	if (defined($a = <F>)) {
-	    close($kid_pipe) || warn "kid exited $?";
-	    undef $kid_pipe;
-	    $$ref = $a;
-  	}
-    } else { $kid_pipe = connected2(); }
-    1;
-}
-
-sub connected2 {
-    my $pid = open(KID_TO_READ, "-|");
-    if ($pid) {   # parent
-	return \*KID_TO_READ;
-    } else {      # child
-	my $a = gethostbyname("mandrakesoft.com") ? 1 : 0;
-	print $a;
-	c::_exit(0);
-    }
-}
-
-sub disconnected { }
-
-
-sub write_initscript {
-    output ("$prefix/etc/rc.d/init.d/internet",
-	    q{
-#!/bin/bash
-#
-# internet       Bring up/down internet connection
-#
-# chkconfig: 2345 11 89
-# description: Activates/Deactivates the internet interfaces
-#
-# dam's (damien@mandrakesoft.com)
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-	case "$1" in
-		start)
-                if [ -e } . $connect_file . q{ ]; then
-			action "Checking internet connections to start at boot" "} . "$connect_file --boot_time" . q{"
-		else
-			action "No connection to start" "true"
-		fi
-		touch /var/lock/subsys/internet
-		;;
-	stop)
-                if [ -e } . $disconnect_file . q{ ]; then
-			action "Stopping internet connection if needed: " "} . "$disconnect_file --boot_time" . q{"
-		else
-			action "No connection to stop" "true"
-		fi
-		rm -f /var/lock/subsys/internet
-		;;
-	restart)
-		$0 stop
-		echo "Waiting 10 sec before restarting the internet connection."
-		sleep 10
-		$0 start
-		;;
-	status)
-		;;
-	*)
-	echo "Usage: internet {start|stop|status|restart}"
-	exit 1
-esac
-exit 0
- });
-    chmod 0755, "$prefix/etc/rc.d/init.d/internet";
-    $::isStandalone ? system("/sbin/chkconfig --add internet") : do {
-	symlinkf ("../init.d/internet", "$prefix/etc/rc.d/rc$_") foreach
-	  '0.d/K11internet', '1.d/K11internet', '2.d/K11internet', '3.d/S89internet', '5.d/S89internet', '6.d/K11internet';
-    };
-}
-
-1;
diff --git a/perl-install/pam.net_monitor b/perl-install/pam.net_monitor
deleted file mode 100644
index bc9a8d611..000000000
--- a/perl-install/pam.net_monitor
+++ /dev/null
@@ -1,6 +0,0 @@
-#%PAM-1.0
-auth       sufficient   /lib/security/pam_rootok.so
-auth       required /lib/security/pam_stack.so service=system-auth
-account    required /lib/security/pam_permit.so
-session    optional /lib/security/pam_xauth.so
-
diff --git a/perl-install/partition_table.pm b/perl-install/partition_table.pm
deleted file mode 100644
index 2feb0faf3..000000000
--- a/perl-install/partition_table.pm
+++ /dev/null
@@ -1,794 +0,0 @@
-package partition_table; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK @important_types @important_types2 @fields2save @bad_types);
-
-@ISA = qw(Exporter);
-%EXPORT_TAGS = (
-    types => [ qw(type2name type2fs name2type fs2type isExtended isExt2 isThisFs isTrueFS isSwap isDos isWin isFat isSunOS isOtherAvailableFS isPrimary isRawLVM isRawRAID isRAID isLVM isNT isMountableRW isNonMountable isPartOfLVM isPartOfRAID isPartOfLoopback isApplePartMap isLoopback isMounted isBusy isSpecial maybeFormatted isApple isAppleBootstrap) ],
-);
-@EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
-
-
-use common;
-use partition_table_raw;
-use detect_devices;
-use log;
-
-@important_types = ('Linux native', 'Linux swap', 
-		    if_(arch() =~ /i.86/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: JFS', 'Journalised FS: XFS', 'DOS FAT16', 'FAT32'),
-			if_(arch() =~ /ia64/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: XFS', 'FAT32'),
-		    if_(arch() =~ /ppc/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: JFS', 'Journalised FS: XFS', 'Apple HFS Partition', 'Apple Bootstrap'));
-@important_types2 = ('Linux RAID', 'Linux Logical Volume Manager partition');
-
-@fields2save = qw(primary extended totalsectors isDirty needKernelReread);
-
-@bad_types = ('Empty', 'DOS 3.3+ Extended Partition', 'Win95: Extended partition, LBA-mapped', 'Linux extended partition');
-
-my %types = (
-  0x0 => 'Empty',
-if_(arch() =~ /^ppc/, 
-  0x183 => 'Journalised FS: ReiserFS',
-  0x283 => 'Journalised FS: XFS',
-  0x383 => 'Journalised FS: JFS',
-  0x483 => 'Journalised FS: ext3',
-  0x401	=> 'Apple Partition',
-  0x401	=> 'Apple Bootstrap',
-  0x402	=> 'Apple HFS Partition',
-), if_(arch() =~ /^i.86/,
-  0x183 => 'Journalised FS: ReiserFS',
-  0x283 => 'Journalised FS: XFS',
-  0x383 => 'Journalised FS: JFS',
-  0x483 => 'Journalised FS: ext3',
-), if_(arch() =~ /^ia64/,
-  0x100 => 'Various',
-  0x183 => 'Journalised FS: ReiserFS',
-  0x283 => 'Journalised FS: XFS',
-  0x483 => 'Journalised FS: ext3',
-), if_(arch() =~ /^sparc/,
-  0x1 => 'SunOS boot',
-  0x2 => 'SunOS root',
-  0x3 => 'SunOS swap',
-  0x4 => 'SunOS usr',
-  0x5 => 'Whole disk',
-  0x6 => 'SunOS stand',
-  0x7 => 'SunOS var',
-  0x8 => 'SunOS home',
-), if_(arch() =~ /^i.86/,
-  0x1 => 'DOS 12-bit FAT',
-  0x2 => 'XENIX root',
-  0x3 => 'XENIX /usr',
-  0x4 => 'DOS 16-bit FAT (up to 32M)',
-  0x5 => 'DOS 3.3+ Extended Partition',
-  0x6 => 'DOS FAT16',
-  0x7 => 'NTFS (or HPFS)',
-  0x8 => 'OS/2 (v1.0-1.3 only) / AIX boot partition / SplitDrive / Commodore DOS / DELL partition spanning multiple drives / QNX 1.x and 2.x ("qny")',
-),
-  0x9 => 'AIX data partition / Coherent filesystem / QNX 1.x and 2.x ("qnz")',
-  0xa => 'OS/2 Boot Manager / Coherent swap partition / OPUS',
-  0xb => 'FAT32',
-  0xc => 'Win98 FAT32, LBA-mapped',
-  0xe => 'Win95: DOS 16-bit FAT, LBA-mapped',
-  0xf => 'Win95: Extended partition, LBA-mapped',
-  0x10 => 'OPUS (?)',
-  0x11 => 'Hidden DOS 12-bit FAT',
-  0x12 => 'Compaq/HP config partition',
-  0x14 => 'Hidden DOS 16-bit FAT <32M',
-  0x16 => 'Hidden DOS 16-bit FAT >=32M',
-  0x17 => 'Hidden IFS (e.g., HPFS)',
-  0x18 => 'AST Windows swapfile',
-  0x1b => 'Hidden WIN95 OSR2 32-bit FAT',
-  0x1c => 'Hidden WIN95 OSR2 32-bit FAT, LBA-mapped',
-  0x1e => 'Hidden FAT95',
-  0x22 => 'Used for Oxygen Extended Partition Table by ekstazya@sprint.ca.',
-  0x24 => 'NEC DOS 3.x',
-  0x38 => 'THEOS ver 3.2 2gb partition',
-  0x39 => 'THEOS ver 4 spanned partition',
-  0x3a => 'THEOS ver 4 4gb partition',
-  0x3b => 'THEOS ver 4 extended partition',
-  0x3c => 'PartitionMagic recovery partition',
-  0x40 => 'Venix 80286',
-  0x41 => 'Linux/MINIX (sharing disk with DRDOS) / Personal RISC Boot / PPC PReP (Power PC Reference Platform) Boot',
-  0x42 => 'Windows Dynamic Partition',
-  0x43 => 'Linux native (sharing disk with DRDOS)',
-  0x45 => 'EUMEL/Elan',
-  0x46 => 'EUMEL/Elan 0x46',
-  0x47 => 'EUMEL/Elan 0x47',
-  0x48 => 'EUMEL/Elan 0x48',
-  0x4d => 'QNX4.x',
-  0x4e => 'QNX4.x 2nd part',
-  0x4f => 'QNX4.x 3rd part / Oberon partition',
-  0x50 => 'OnTrack Disk Manager (older versions) RO',
-  0x51 => 'OnTrack Disk Manager RW (DM6 Aux1) / Novell',
-  0x52 => 'CP/M / Microport SysV/AT',
-  0x53 => 'Disk Manager 6.0 Aux3',
-  0x54 => 'Disk Manager 6.0 Dynamic Drive Overlay',
-  0x55 => 'EZ-Drive',
-  0x56 => 'Golden Bow VFeature Partitioned Volume. / DM converted to EZ-BIOS',
-  0x57 => 'DrivePro',
-  0x5c => 'Priam EDisk',
-  0x61 => 'SpeedStor',
-  0x63 => 'Unix System V (SCO, ISC Unix, UnixWare, ...), Mach, GNU Hurd',
-  0x64 => 'PC-ARMOUR protected partition / Novell Netware 2.xx',
-  0x65 => 'Novell Netware 3.xx or 4.xx',
-  0x67 => 'Novell',
-  0x68 => 'Novell 0x68',
-  0x69 => 'Novell 0x69',
-  0x70 => 'DiskSecure Multi-Boot',
-  0x75 => 'IBM PC/IX',
-  0x80 => 'MINIX until 1.4a',
-  0x81 => 'MINIX since 1.4b, early Linux / Mitac disk manager',
-  0x82 => 'Linux swap',
-  0x83 => 'Linux native',
-  0x84 => 'OS/2 hidden C: drive / Hibernation partition',
-  0x85 => 'Linux extended partition',
-  0x86 => 'Old Linux RAID partition superblock / NTFS volume set',
-  0x87 => 'NTFS volume set',
-  0x8a => 'Linux Kernel Partition (used by AiR-BOOT)',
-  0x8e => 'Linux Logical Volume Manager partition',
-  0x93 => 'Amoeba',
-  0x94 => 'Amoeba bad block table',
-  0x99 => 'DCE376 logical drive',
-  0xa0 => 'IBM Thinkpad hibernation partition / Phoenix NoteBIOS Power Management "Save-to-Disk" partition',
-  0xa5 => 'BSD/386, 386BSD, NetBSD, FreeBSD',
-  0xa6 => 'OpenBSD',
-  0xa7 => 'NEXTSTEP',
-  0xa9 => 'NetBSD',
-  0xaa => 'Olivetti Fat 12 1.44Mb Service Partition',
-  0xb7 => 'BSDI filesystem',
-  0xb8 => 'BSDI swap partition',
-  0xbe => 'Solaris boot partition',
-  0xc0 => 'CTOS / REAL/32 secure small partition',
-  0xc1 => 'DRDOS/secured (FAT-12)',
-  0xc4 => 'DRDOS/secured (FAT-16, < 32M)',
-  0xc6 => 'DRDOS/secured (FAT-16, >= 32M) / Windows NT corrupted FAT16 volume/stripe set',
-  0xc7 => 'Windows NT corrupted NTFS volume/stripe set / Syrinx boot',
-  0xcb => 'reserved for DRDOS/secured (FAT32)',
-  0xcc => 'reserved for DRDOS/secured (FAT32, LBA)',
-  0xcd => 'CTOS Memdump?',
-  0xce => 'reserved for DRDOS/secured (FAT16, LBA)',
-  0xd0 => 'REAL/32 secure big partition',
-  0xd1 => 'Old Multiuser DOS secured FAT12',
-  0xd4 => 'Old Multiuser DOS secured FAT16 <32M',
-  0xd5 => 'Old Multiuser DOS secured extended partition',
-  0xd6 => 'Old Multiuser DOS secured FAT16 >=32M',
-  0xd8 => 'CP/M-86',
-  0xdb => 'Digital Research CP/M, Concurrent CP/M, Concurrent DOS / CTOS (Convergent Technologies OS -Unisys) / KDG Telemetry SCPU boot',
-  0xdd => 'Hidden CTOS Memdump?',
-  0xe1 => 'DOS access or SpeedStor 12-bit FAT extended partition',
-  0xe3 => 'DOS R/O or SpeedStor',
-  0xe4 => 'SpeedStor 16-bit FAT extended partition < 1024 cyl.',
-  0xeb => 'BeOS',
-  0xee => 'EFI GPT',
-  0xef => 'EFI (FAT-12/16/32)',
-  0xf1 => 'SpeedStor 0xf1',
-  0xf2 => 'DOS 3.3+ secondary partition',
-  0xf4 => 'SpeedStor large partition / Prologue single-volume partition',
-  0xf5 => 'Prologue multi-volume partition',
-  0xfd => 'Linux RAID',
-  0xfe => 'SpeedStor > 1024 cyl. or LANstep / IBM PS/2 IML (Initial Microcode Load) partition, located at the end of the disk. / Windows NT Disk Administrator hidden partition / Linux Logical Volume Manager partition (old)',
-  0xff => 'Xenix Bad Block Table',
-);
-
-my %type2fs = (
-arch() =~ /^ppc/ ? (
-  0x07 => 'hpfs',
-) : (
-  0x07 => 'ntfs',
-),
-arch() !~ /sparc/ ? (
-  0x01 => 'vfat',
-  0x04 => 'vfat',
-  0x05 => 'ignore',
-  0x06 => 'vfat',
-) : (
-  0x01 => 'ufs',
-  0x02 => 'ufs',
-  0x04 => 'ufs',
-  0x06 => 'ufs',
-  0x07 => 'ufs',
-  0x08 => 'ufs',
-),
-  0x0b => 'vfat',
-  0x0c => 'vfat',
-  0x0e => 'vfat',
-  0x1b => 'vfat',
-  0x1c => 'vfat',
-  0x1e => 'vfat',
-  0x82 => 'swap',
-  0x83 => 'ext2',
-  0x183=> 'reiserfs',
-  0x283=> 'xfs',
-  0x383=> 'jfs',
-  0x483=> 'ext3',
-  0x401 => 'apple',
-  0x402 => 'hfs',
-);
-
-my %types_rev = reverse %types;
-my %fs2type = reverse %type2fs;
-
-
-1;
-
-sub important_types { 
-    my @l = (@important_types, if_($::expert, @important_types2, sort values %types));
-    difference2(\@l, \@bad_types);
-}
-
-sub type2fs { $type2fs{$_[0]{type}} || $_[0]{type} }
-sub fs2type { $fs2type{$_[0]} || $_[0] }
-sub type2name { $types{$_[0]} || $_[0] }
-sub name2type { 
-    local ($_) = @_;
-    /0x(.*)/ ? hex $1 : $types_rev{$_} || $_;
-}
-
-sub isWholedisk { arch() =~ /^sparc/ && $_[0]{type} == 5 }
-sub isExtended { arch() !~ /^sparc/ && ($_[0]{type} == 5 || $_[0]{type} == 0xf || $_[0]{type} == 0x85) }
-sub isRawLVM { $_[0]{type} == 0x8e }
-sub isRawRAID { $_[0]{type} == 0xfd }
-sub isSwap { type2fs($_[0]) eq 'swap' }
-sub isExt2 { type2fs($_[0]) eq 'ext2' }
-sub isDos { arch() !~ /^sparc/ && $ {{ 1=>1, 4=>1, 6=>1 }}{$_[0]{type}} }
-sub isWin { $ {{ 0xb=>1, 0xc=>1, 0xe=>1, 0x1b=>1, 0x1c=>1, 0x1e=>1 }}{$_[0]{type}} }
-sub isFat { isDos($_[0]) || isWin($_[0]) }
-sub isSunOS { arch() =~ /sparc/ && $ {{ 0x1=>1, 0x2=>1, 0x4=>1, 0x6=>1, 0x7=>1, 0x8=>1 }}{$_[0]{type}} }
-sub isNT { arch() !~ /^sparc/ && $_[0]{type} == 0x7 }
-sub isApple { type2fs($_[0]) eq 'apple' && defined $_[0]{isDriver} }
-sub isAppleBootstrap { type2fs($_[0]) eq 'apple' && defined $_[0]{isBoot} }
-sub isHiddenMacPart { defined $_[0]{isMap} }
-
-sub isThisFs { type2fs($_[1]) eq $_[0] }
-sub isTrueFS { member(type2fs($_[0]), qw(ext2 reiserfs xfs jfs ext3)) }
-
-sub isOtherAvailableFS { isFat($_[0]) || isSunOS($_[0]) || isThisFs('hfs', $_[0]) } #- other OS that linux can access its filesystem
-sub isMountableRW { isTrueFS($_[0]) || isOtherAvailableFS($_[0]) }
-sub isNonMountable { isRawRAID($_[0]) || isRawLVM($_[0]) }
-
-sub isPartOfLVM { defined $_[0]{lvm} }
-sub isPartOfRAID { defined $_[0]{raid} }
-sub isPartOfLoopback { defined $_[0]{loopback} }
-sub isRAID { $_[0]{device} =~ /^md/ }
-sub isLVM { $_[0]{LVMname} }
-sub isLoopback { defined $_[0]{loopback_file} }
-sub isMounted { $_[0]{isMounted} }
-sub isBusy { isMounted($_[0]) || isPartOfRAID($_[0]) || isPartOfLVM($_[0]) || isPartOfLoopback($_[0]) }
-sub isSpecial { isRAID($_[0]) || isLVM($_[0]) || isLoopback($_[0]) }
-sub maybeFormatted { $_[0]{isFormatted} || !$_[0]{notFormatted} }
-
-
-#- works for both hard drives and partitions ;p
-sub description {
-    my ($hd) = @_;
-    my $win = $hd->{device_windobe};
-
-    sprintf "%s%s (%s%s%s%s)", 
-      $hd->{device}, 
-      $win && " [$win:]", 
-      formatXiB($hd->{totalsectors} || $hd->{size}, 512),
-      $hd->{info} && ", $hd->{info}",
-      $hd->{mntpoint} && ", " . $hd->{mntpoint},
-      $hd->{type} && ", " . type2name($hd->{type});
-}
-
-sub isPrimary {
-    my ($part, $hd) = @_;
-    foreach (@{$hd->{primary}{raw}}) { $part eq $_ and return 1; }
-    0;
-}
-
-sub adjustStartAndEnd {
-    my ($hd, $part) = @_;
-
-    $hd->adjustStart($part);
-    $hd->adjustEnd($part);
-}
-
-sub verifyNotOverlap {
-    my ($a, $b) = @_;
-    $a->{start} + $a->{size} <= $b->{start} || $b->{start} + $b->{size} <= $a->{start};
-}
-sub verifyInside {
-    my ($a, $b) = @_;
-    $b->{start} <= $a->{start} && $a->{start} + $a->{size} <= $b->{start} + $b->{size};
-}
-
-sub verifyParts_ {
-    foreach my $i (@_) {
-	foreach (@_) {
-	    next if !$i || !$_ || $i == $_ || isWholedisk($i) || isExtended($i); #- avoid testing twice for simplicity :-)
-	    if (isWholedisk($_)) {
-		verifyInside($i, $_) or
-		  cdie sprintf("partition sector #$i->{start} (%s) is not inside whole disk (%s)!",
-			       formatXiB($i->{size}, 512), formatXiB($_->{size}, 512));
-	    } elsif (isExtended($_)) {
-		verifyNotOverlap($i, $_) or
-		  log::l(sprintf("warning partition sector #$i->{start} (%s) is overlapping with extended partition!",
-				 formatXiB($i->{size}, 512))); #- only warning for this one is acceptable
-	    } else {
-		verifyNotOverlap($i, $_) or
-		  cdie sprintf("partitions sector #$i->{start} (%s) and sector #$_->{start} (%s) are overlapping!",
-			       formatXiB($i->{size}, 512), formatXiB($_->{size}, 512));
-	    }
-	}
-    }
-}
-sub verifyParts {
-    my ($hd) = @_;
-    verifyParts_(get_normal_parts($hd));
-}
-sub verifyPrimary {
-    my ($pt) = @_;
-    $_->{start} > 0 || arch() =~ /^sparc/ || die "partition must NOT start at sector 0" foreach @{$pt->{normal}};
-    verifyParts_(@{$pt->{normal}}, $pt->{extended});
-}
-
-sub assign_device_numbers {
-    my ($hd) = @_;
-
-    my $i = 1;
-    my $start = 1; 
-    
-    #- on PPC we need to assign device numbers to the holes too - big FUN!
-    #- not if it's an IBM machine using a DOS partition table though
-    if (arch() =~ /ppc/ && detect_devices::get_mac_model() !~ /^IBM/) {
-	#- first sort the normal parts
-	$hd->{primary}{normal} = [sort { $a->{start} <=> $b->{start} } @{$hd->{primary}{normal}} ];
-    
-	#- now loop through them, assigning partition numbers - reserve one for the holes
-	foreach (@{$hd->{primary}{normal}}) {
-	    if ($_->{start} > $start) {
-		log::l("PPC: found a hole on $hd->{prefix} before $_->{start}, skipping device..."); 
-		$i++;
-	    }
-	    $_->{device} = $hd->{prefix} . $i++;
-	    $start = $_->{start} + $_->{size};
-	}
-    } else {
-	foreach (@{$hd->{primary}{raw}}) {
-	    my $dev = $hd->{prefix} . $i++;
-	    $_->{device} = $dev;
-	}
-	foreach (map { $_->{normal} } @{$hd->{extended} || []}) {
-	    my $dev = $hd->{prefix} . $i++;
-	    push @{$hd->{partitionsRenumbered}}, [ $_->{device}, $dev ] if $_->{device} && $dev ne $_->{device};
-	    $_->{device} = $dev;
-	}
-    }
-
-    #- try to figure what the windobe drive letter could be!
-    #
-    #- first verify there's at least one primary dos partition, otherwise it
-    #- means it is a secondary disk and all will be false :(
-    my ($c, @others) = grep { isFat($_) } @{$hd->{primary}{normal}};
-
-    $i = ord 'C';
-    $c->{device_windobe} = chr($i++) if $c;
-    $_->{device_windobe} = chr($i++) foreach grep { isFat($_) } map { $_->{normal} } @{$hd->{extended}};
-    $_->{device_windobe} = chr($i++) foreach @others;
-}
-
-sub remove_empty_extended {
-    my ($hd) = @_;
-    my $last = $hd->{primary}{extended} or return;
-    @{$hd->{extended}} = grep {
-	if ($_->{normal}) {
-	    $last = $_;
-	} else {
-	    %{$last->{extended}} = $_->{extended} ? %{$_->{extended}} : ();
-	}
-	$_->{normal};
-    } @{$hd->{extended}};
-    adjust_main_extended($hd);
-}
-
-sub adjust_main_extended {
-    my ($hd) = @_;
-
-    if (!is_empty_array_ref $hd->{extended}) {
-	my ($l, @l) = @{$hd->{extended}};
-
-	# the first is a special case, must recompute its real size
-	my $start = round_down($l->{normal}{start} - 1, $hd->{geom}{sectors});
-	my $end = $l->{normal}{start} + $l->{normal}{size};
-	my $only_linux = 1; my $has_win_lba = 0;
-	foreach (map $_->{normal}, $l, @l) {
-	    $start = min($start, $_->{start});
-	    $end = max($end, $_->{start} + $_->{size});
-	    $only_linux &&= isTrueFS($_) || isSwap($_);
-	    $has_win_lba ||= $_->{type} == 0xc || $_->{type} == 0xe;
-	}
-	$l->{start} = $hd->{primary}{extended}{start} = $start;
-	$l->{size} = $hd->{primary}{extended}{size} = $end - $start;
-    }
-    unless (@{$hd->{extended} || []} || !$hd->{primary}{extended}) {
-	%{$hd->{primary}{extended}} = (); #- modify the raw entry
-	delete $hd->{primary}{extended};
-    }
-    verifyParts($hd); #- verify everything is all right
-}
-
-sub adjust_local_extended {
-    my ($hd, $part) = @_;
-    
-    foreach (@{$hd->{extended} || []}) {
-	$_->{normal} == $part or next;
-	$_->{size} = $part->{size} + $part->{start} - $_->{start};
-	last;
-    }
-}
-
-sub get_normal_parts {
-    my ($hd) = @_;
-
-    @{$hd->{primary}{normal} || []}, map { $_->{normal} } @{$hd->{extended} || []}
-}
-
-sub get_normal_parts_and_holes {
-    my ($hd) = @_;
-    my ($start, $last) = ($hd->first_usable_sector, $hd->last_usable_sector);
-
-    ref($hd) or print("get_normal_parts_and_holes: bad hd" . backtrace(), "\n");
-
-    my @l = map {
-	my $current = $start;
-	$start = $_->{start} + $_->{size};
-	my $hole = { start => $current, size => $_->{start} - $current, type => 0, rootDevice => $hd->{device} };
-	$hole, $_;
-    } sort { $a->{start} <=> $b->{start} } grep { !isWholedisk($_) } get_normal_parts($hd);
-
-    push @l, { start => $start, size => $last - $start, type => 0, rootDevice => $hd->{device} };
-    grep { $_->{type} || $_->{size} >= $hd->cylinder_size } @l;
-}
-
-sub read_one($$) {
-    my ($hd, $sector) = @_;
-    my ($pt, $info);
-
-    #- it can be safely considered that the first sector is used to probe the partition table
-    #- but other sectors (typically for extended partition ones) have to match this type!
-    if (!$sector) {
-	my @parttype = (
-	  if_(arch() =~ /^ia64/, 'gpt'),
-	  arch() =~ /^sparc/ ? ('sun', 'bsd') : ('dos', 'bsd', 'sun', 'mac'),
-	);
-	foreach ('empty', @parttype, 'lvm_PV', 'unknown') {
-	    /unknown/ and die "unknown partition table format on disk " . $hd->{file};
-	    eval {
-		require("partition_table_$_.pm");
-		bless $hd, "partition_table_$_";
-		($pt, $info) = $hd->read($sector);
-		log::l("found a $_ partition table on $hd->{file} at sector $sector");
-	    };
-	    $@ or last;
-	}
-    } else {
-	#- keep current blessed object for that, this means it is neccessary to read sector 0 before.
-	($pt, $info) = $hd->read($sector);
-    }
-
-    my @extended = $hd->hasExtended ? grep { isExtended($_) } @$pt : ();
-    my @normal = grep { $_->{size} && $_->{type} && !isExtended($_) } @$pt;
-
-    @extended > 1 and die "more than one extended partition";
-
-    $_->{rootDevice} = $hd->{device} foreach @normal, @extended;
-    { raw => $pt, extended => $extended[0], normal => \@normal, info => $info };
-}
-
-sub read($;$) {
-    my ($hd, $clearall) = @_;
-    if ($clearall) {
-	partition_table_raw::zero_MBR_and_dirty($hd);
-	return 1;
-    }
-    my $pt = read_one($hd, 0) or return 0;
-    $hd->{primary} = $pt;
-    undef $hd->{extended};
-    verifyPrimary($pt);
-    eval {
-	my $need_removing_empty_extended;
-	$pt->{extended} and read_extended($hd, $pt->{extended}, \$need_removing_empty_extended) || return 0;
-
-	if ($need_removing_empty_extended) {
-	    #- special case when hda5 is empty, it must be skipped
-	    #- (windows XP generates such partition tables)
-	    remove_empty_extended($hd); #- includes adjust_main_extended
-	}
-	
-    }; 
-    die "extended partition: $@" if $@;
-
-    assign_device_numbers($hd);
-    remove_empty_extended($hd);
-    1;
-}
-
-sub read_extended {
-    my ($hd, $extended, $need_removing_empty_extended) = @_;
-
-    my $pt = read_one($hd, $extended->{start}) or return 0;
-    $pt = { %$extended, %$pt };
-
-    push @{$hd->{extended}}, $pt;
-    @{$hd->{extended}} > 100 and die "oops, seems like we're looping here :(  (or you have more than 100 extended partitions!)";
-
-    if (@{$pt->{normal}} == 0) {
-	$$need_removing_empty_extended = 1;
-	delete $pt->{normal};
-	print "need_removing_empty_extended\n";
-    } elsif (@{$pt->{normal}} > 1) {
-	die "more than one normal partition in extended partition";
-    } else {
-	$pt->{normal} = $pt->{normal}[0];
-	#- in case of extended partitions, the start sector is local to the partition or to the first extended_part!
-	$pt->{normal}{start} += $pt->{start};
-
-	#- the following verification can broke an existing partition table that is
-	#- correctly read by fdisk or cfdisk. maybe the extended partition can be
-	#- recomputed to get correct size.
-	if (!verifyInside($pt->{normal}, $extended)) {
-	    $extended->{size} = $pt->{normal}{start} + $pt->{normal}{size};
-	    verifyInside($pt->{normal}, $extended) or die "partition $pt->{normal}{device} is not inside its extended partition";
-	}
-    }
-
-    if ($pt->{extended}) {
-	$pt->{extended}{start} += $hd->{primary}{extended}{start};
-	return read_extended($hd, $pt->{extended}, $need_removing_empty_extended);
-    } else {
-	1;
-    }
-}
-
-# write the partition table
-sub write {
-    my ($hd) = @_;
-    $hd->{isDirty} or return;
-
-    #- set first primary partition active if no primary partitions are marked as active.
-    if (my @l = @{$hd->{primary}{raw}}) {
-	foreach (@l) { 
-	    $_->{local_start} = $_->{start}; 
-	    $_->{active} ||= 0;
-	}
-	$l[0]{active} = 0x80 if !grep { $_->{active} } @l;
-    }
-
-    #- last chance for verification, this make sure if an error is detected,
-    #- it will never be writed back on partition table.
-    verifyParts($hd);
-
-    $hd->write(0, $hd->{primary}{raw}, $hd->{primary}{info}) or die "writing of partition table failed";
-
-    #- should be fixed but a extended exist with no real extended partition, that blanks mbr!
-    if (arch() !~ /^sparc/) {
-	foreach (@{$hd->{extended}}) {
-	    # in case of extended partitions, the start sector must be local to the partition
-	    $_->{normal}{local_start} = $_->{normal}{start} - $_->{start};
-	    $_->{extended} and $_->{extended}{local_start} = $_->{extended}{start} - $hd->{primary}{extended}{start};
-
-	    $hd->write($_->{start}, $_->{raw}) or die "writing of partition table failed";
-	}
-    }
-    $hd->{isDirty} = 0;
-    $hd->{hasBeenDirty} = 1; #- used in undo (to know if undo should believe isDirty or not)
-
-    if ($hd->{needKernelReread} && ref($hd->{needKernelReread}) eq 'ARRAY' && $::isStandalone) {
-	#- we've only been adding partitions. Try special add_partition (using BLKPG_ADD_PARTITION)
-	local *F;
-	partition_table_raw::openit($hd, *F) or goto force_reread;
-
-	foreach (@{$hd->{needKernelReread}}) {
-	    c::add_partition(fileno F, $_->{start}, $_->{size}, $_->{device} =~ /(\d+)$/)
-		or goto force_reread;
-	}
-    } elsif ($hd->{needKernelReread}) {
-      force_reread:
-	#- now sync disk and re-read the partition table
-	common::sync();
-
-	my @magic_parts = grep { $_->{isMounted} && $_->{real_mntpoint} } get_normal_parts($hd);
-	foreach (@magic_parts) {
-	    syscall_('umount', $_->{real_mntpoint}) or log::l(_("error unmounting %s: %s", $_->{real_mntpoint}, "$!"));
-	}
-	$hd->kernel_read;
-	foreach (@magic_parts) {
-	    syscall_('mount', , $_->{real_mntpoint}, type2fs($_), c::MS_MGC_VAL()) or log::l(_("mount failed: ") . "$!");
-	}
-    }
-    $hd->{needKernelReread} = 0;
-}
-
-sub active {
-    my ($hd, $part) = @_;
-
-    $_->{active} = 0 foreach @{$hd->{primary}{normal}};
-    $part->{active} = 0x80;
-    $hd->{isDirty} = 1;
-}
-
-
-# remove a normal partition from hard drive hd
-sub remove {
-    my ($hd, $part) = @_;
-    my $i;
-
-    #- first search it in the primary partitions
-    $i = 0; foreach (@{$hd->{primary}{normal}}) {
-	if ($_ eq $part) {
-	    splice(@{$hd->{primary}{normal}}, $i, 1);
-	    %$_ = (); #- blank it
-
-	    $hd->raw_removed($hd->{primary}{raw});
-	    return $hd->{isDirty} = $hd->{needKernelReread} = 1;
-	}
-	$i++;
-    }
-
-    my ($first, $second, $third) = map { $_->{normal} } @{$hd->{extended} || []};
-    if ($third && $first eq $part) {
-	die "Can't handle removing hda5 when hda6 is not the second partition" if $second->{start} > $third->{start};
-    }      
-
-    #- otherwise search it in extended partitions
-    foreach (@{$hd->{extended} || []}) {
-	$_->{normal} eq $part or next;
-
-	delete $_->{normal}; #- remove it
-	remove_empty_extended($hd);
-	assign_device_numbers($hd);
-
-	return $hd->{isDirty} = $hd->{needKernelReread} = 1;
-    }
-    0;
-}
-
-# create of partition at starting at `start', of size `size' and of type `type' (nice comment, uh?)
-sub add_primary {
-    my ($hd, $part) = @_;
-
-    {
-	local $hd->{primary}{normal}; #- save it to fake an addition of $part, that way add_primary do not modify $hd if it fails
-	push @{$hd->{primary}{normal}}, $part;
-	adjust_main_extended($hd); #- verify
-	$hd->raw_add($hd->{primary}{raw}, $part);
-    }
-    push @{$hd->{primary}{normal}}, $part; #- really do it
-}
-
-sub add_extended {
-    arch() =~ /^sparc|ppc/ and die _("Extended partition not supported on this platform");
-
-    my ($hd, $part, $extended_type) = @_;
-    $extended_type =~ s/Extended_?//;
-
-    my $e = $hd->{primary}{extended};
-
-    if ($e && !verifyInside($part, $e)) {
-	#-die "sorry, can't add outside the main extended partition" unless $::unsafe;
-	my $end = $e->{start} + $e->{size};
-	my $start = min($e->{start}, $part->{start});
-	$end = max($end, $part->{start} + $part->{size}) - $start;
-
-	{ #- faking a resizing of the main extended partition to test for problems
-	    local $e->{start} = $start;
-	    local $e->{size} = $end - $start;
-	    eval { verifyPrimary($hd->{primary}) };
-	    $@ and die
-_("You have a hole in your partition table but I can't use it.
-The only solution is to move your primary partitions to have the hole next to the extended partitions.");
-	}
-    }
-
-    if ($e && $part->{start} < $e->{start}) {
-	my $l = first (@{$hd->{extended}});
-
-	#- the first is a special case, must recompute its real size
-	$l->{start} = round_down($l->{normal}{start} - 1, $hd->cylinder_size());
-	$l->{size} = $l->{normal}{start} + $l->{normal}{size} - $l->{start};
-	my $ext = { %$l };
-	unshift @{$hd->{extended}}, { type => 5, raw => [ $part, $ext, {}, {} ], normal => $part, extended => $ext };
-	#- size will be autocalculated :)
-    } else {
-	my ($ext, $ext_size) = is_empty_array_ref($hd->{extended}) ?
-	  ($hd->{primary}, -1) : #- -1 size will be computed by adjust_main_extended
-	  (top(@{$hd->{extended}}), $part->{size});
-	my %ext = ( type => $extended_type || 5, start => $part->{start}, size => $ext_size );
-
-	$hd->raw_add($ext->{raw}, \%ext);
-	$ext->{extended} = \%ext;
-	push @{$hd->{extended}}, { %ext, raw => [ $part, {}, {}, {} ], normal => $part };
-    }
-    $part->{start}++; $part->{size}--; #- let it start after the extended partition sector
-    adjustStartAndEnd($hd, $part);
-
-    adjust_main_extended($hd);
-}
-
-sub add {
-    my ($hd, $part, $primaryOrExtended, $forceNoAdjust) = @_;
-
-    get_normal_parts($hd) >= ($hd->{device} =~ /^rd/ ? 7 : $hd->{device} =~ /^(sd|ida|cciss|ataraid)/ ? 15 : 63) and cdie "maximum number of partitions handled by linux reached";
-
-    $part->{notFormatted} = 1;
-    $part->{isFormatted} = 0;
-    $part->{rootDevice} = $hd->{device};
-    $part->{start} ||= 1 if arch() !~ /^sparc/; #- starting at sector 0 is not allowed
-    adjustStartAndEnd($hd, $part) unless $forceNoAdjust;
-
-    my $e = $hd->{primary}{extended};
-    my $nb_primaries = $hd->{device} =~ /^rd/ ? 3 : 1;
-
-    if (arch() =~ /^sparc|ppc/ ||
-	$primaryOrExtended eq 'Primary' ||
-	$primaryOrExtended !~ /Extended/ && @{$hd->{primary}{normal} || []} < $nb_primaries) {
-	eval { add_primary($hd, $part) };
-	goto success if !$@;
-    }
-    eval { add_extended($hd, $part, $primaryOrExtended) } if $hd->hasExtended; #- try adding extended
-    if ($@ || !$hd->hasExtended) {
-	eval { add_primary($hd, $part) };
-	die $@ if $@; #- send the add extended error which should be better
-    }
-  success:
-    assign_device_numbers($hd);
-    $hd->{isDirty} = 1;
-    push @{$hd->{needKernelReread} ||= []}, $part if !$hd->{needKernelReread} || ref($hd->{needKernelReread}) eq 'ARRAY'
-}
-
-# search for the next partition
-sub next {
-    my ($hd, $part) = @_;
-
-    first(
-	  sort { $a->{start} <=> $b->{start} }
-	  grep { $_->{start} >= $part->{start} + $part->{size} }
-	  get_normal_parts($hd)
-	 );
-}
-sub next_start {
-    my ($hd, $part) = @_;
-    my $next = &next($hd, $part);
-    $next ? $next->{start} : $hd->{totalsectors};
-}
-
-sub load {
-    my ($hd, $file, $force) = @_;
-
-    local *F;
-    open F, $file or die _("Error reading file %s", $file);
-
-    my $h;
-    {
-	local $/ = "\0";
-	eval <F>;
-    }
-    $@ and die _("Restoring from file %s failed: %s", $file, $@);
-
-    ref $h eq 'ARRAY' or die _("Bad backup file");
-
-    my %h; @h{@fields2save} = @$h;
-
-    $h{totalsectors} == $hd->{totalsectors} or $force or cdie "bad totalsectors";
-
-    #- unsure we don't modify totalsectors
-    local $hd->{totalsectors};
-
-    @{$hd}{@fields2save} = @$h;
-
-    delete @$_{qw(isMounted isFormatted notFormatted toFormat toFormatUnsure)} foreach get_normal_parts($hd);
-    $hd->{isDirty} = $hd->{needKernelReread} = 1;
-}
-
-sub save {
-    my ($hd, $file) = @_;
-    my @h = @{$hd}{@fields2save};
-    local *F;
-    require Data::Dumper;
-    open F, ">$file"
-      and print F Data::Dumper->Dump([\@h], ['$h']), "\0"
-      or die _("Error writing to file %s", $file);
-}
diff --git a/perl-install/patch/patch-oem-hp.pl b/perl-install/patch/patch-oem-hp.pl
deleted file mode 100644
index 0a5b0b51e..000000000
--- a/perl-install/patch/patch-oem-hp.pl
+++ /dev/null
@@ -1,323 +0,0 @@
-use modules;
-package modules;
-my $old_load_raw = \&load_raw;
-undef *load_raw;
-*load_raw = sub {
-    &$old_load_raw;
-
-    my @l = map { my ($i, @i) = @$_; [ $i, \@i ] } grep { $_->[0] !~ /ignore/ } @_;
-    foreach (@l) {
-	if ($_->[0] eq 'ehci-hcd') {
-	    add_alias('usb-interface1', $_->[0]);
-	}
-    }
-
-    if (get_alias("usb-interface") || get_alias("usb-interface1")) {
-	unless (-e "/proc/bus/usb/devices") {
-	    require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs');
-	    #- ensure keyboard is working, the kernel must do the job the BIOS was doing
-	    sleep 4;
-	    load_multi("usbkbd", "keybdev") if detect_devices::usbKeyboards();
-	}
-    }
-};
-
-my $old_load = \&load;
-undef *load;
-*load = sub {
-    &$old_load;
-
-    #- hack to get back usb-interface (even if already loaded by stage1)
-    #- NOTE load_multi is not used for that so not overloaded to fix that too.
-    if ($_[0] =~ /usb-[uo]hci/ && !get_alias("usb-interface")) {
-	add_alias('usb-interface', $_[0]);
-    } elsif ($_[0] eq 'ehci-hcd' && !get_alias("usb-interface1")) {
-	add_alias('usb-interface1', $_[0]);
-    }
-
-    if (get_alias("usb-interface") || get_alias("usb-interface1")) {
-	unless (-e "/proc/bus/usb/devices") {
-	    require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs');
-	    #- ensure keyboard is working, the kernel must do the job the BIOS was doing
-	    sleep 4;
-	    load_multi("usbkbd", "keybdev") if detect_devices::usbKeyboards();
-	}
-    }
-};
-
-#- ensure it is loaded using this patch.
-$::noauto or modules::load_thiskind("usb"); 
-sleep 2;
-
-use install_steps;
-package install_steps;
-
-my $old_beforeInstallPackages = \&beforeInstallPackages;
-undef *beforeInstallPackages;
-*beforeInstallPackages = sub {
-    &$old_beforeInstallPackages;
-
-    my ($o) = @_;
-    mkdir "$o->{prefix}$_" foreach qw(/boot /usr /usr/share /usr/share/mdk);
-    install_any::getAndSaveFile("Mandrake/base/oem-message-graphic", "$o->{prefix}/boot/oem-message-graphic");
-    install_any::getAndSaveFile("Mandrake/base/oem-background.png", "$o->{prefix}/usr/share/mdk/oem-background.png");
-};
-
-my $old_afterInstallPackages = \&afterInstallPackages;
-undef *afterInstallPackages;
-*afterInstallPackages = sub {
-    &$old_afterInstallPackages;
-
-    my ($o) = @_;
-
-    #- lilo image.
-    rename "$o->{prefix}/boot/lilo-graphic/message", "$o->{prefix}/boot/lilo-graphic/message.orig";
-    system "chroot", $o->{prefix}, "cp", "-f", "/boot/oem-message-graphic", "/boot/lilo-graphic/message";
-
-    #- KDE desktop background.
-    if (-e "$o->{prefix}/usr/share/config/kdesktoprc") {
-	update_gnomekderc("$o->{prefix}/usr/share/config/kdesktoprc", "Desktop0",
-			  MultiWallpaperMode => "NoMulti",
-			  Wallpaper => "/usr/share/mdk/oem-background.png",
-			  WallpaperMode => "Scaled",
-			 );
-    }
-    #- GNOME desktop background.
-    if (-e "$o->{prefix}/etc/gnome/config/Background") {
-	update_gnomekderc("$o->{prefix}/etc/gnome/config/Background", "Default",
-			  wallpaper => "/usr/share/mdk/oem-background.png",
-			  wallpaperAlign => "3",
-			 );
-    }
-
-    #- make sure no error can be forwarded, test staroffice installed and OpenOffice.org,
-    #- remove the first if the second is installed.
-    eval {
-	if (!$o->{isUpgrade} && -e "$o->{prefix}/usr/lib/openoffice/program/soffice.bin" && grep { -e "$o->{prefix}/usr/lib/office60_$_/program/soffice.bin" } qw(de en es fr it)) {
-	    require run_program;
-	    log::l("removing OpenOffice.org as staroffice is installed");
-	    run_program::rooted($o->{prefix}, "rpm", "-e", "OpenOffice.org");
-	}
-    };
-};
-
-use install_any;
-package install_any;
-
-undef *copy_advertising;
-*copy_advertising = sub {
-    my ($o) = @_;
-
-    return if $::rootwidth < 800;
-
-    my $f;
-    my $source_dir = "Mandrake/share/advertising";
-    foreach ("." . $o->{lang}, "." . substr($o->{lang},0,2), '') {
-	$f = getFile("$source_dir$_/list") or next;
-	$source_dir = "$source_dir$_";
-    }
-    if (my @files = <$f>) {
-	my $dir = "$o->{prefix}/tmp/drakx-images";
-	mkdir $dir;
-	unlink glob_("$dir/*");
-	foreach (@files) {
-	    chomp;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/\.png/\.pl/;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/\.pl/_icon\.png/;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/_icon\.png/\.png/;
-	}
-	@advertising_images = map { $_ && -e "$dir/$_" ? ("$dir/$_") : () } @files;
-    }
-};
-
-#undef *allowNVIDIA_rpms;
-#*allowNVIDIA_rpms = sub {
-#    my ($packages) = @_;
-#    require pkgs;
-#    if (pkgs::packageByName($packages, "NVIDIA_GLX")) {
-#	#- at this point, we can allow using NVIDIA 3D acceleration packages.
-#	my @rpms;
-#	foreach (keys %{$packages->{names}}) {
-#	    my ($ext, $version, $release) = /kernel[^-]*(-smp|-enterprise|-secure)?(?:-(\d.*?)\.(\d+\.\d+mdk))?$/ or next;
-#	    my $p = pkgs::packageByName($packages, $_);
-#	    pkgs::packageSelectedOrInstalled($p) or next;
-#	    $version or ($version, $release) = (pkgs::packageVersion($p), pkgs::packageRelease($p));
-#	    my $name = "NVIDIA_kernel-$version-$release$ext";
-#	    pkgs::packageByName($packages, $name) or return;
-#	    push @rpms, $name;
-#	}
-#	@rpms > 0 or return;
-#	return [ @rpms, "NVIDIA_GLX" ];
-#    }
-#};
-
-use detect_devices;
-package detect_devices;
-
-undef *usbMice;
-*usbMice = sub { grep { ($_->{media_type} =~ /\|Mouse/ || $_->{driver} =~ /Mouse:USB/) &&
-			  $_->{driver} !~ /Tablet:wacom/} usb_probe() };
-
-use Xconfigurator;
-package Xconfigurator;
-
-undef *cardConfigurationAuto;
-*cardConfigurationAuto = sub {
-    my @cards;
-    if (my @c = grep { $_->{driver} =~ /(Card|Server):/ } detect_devices::probeall()) {
-	@c >= 2 && $c[0]{description} eq $c[1]{description} && $c[0]{description} =~ /82830 CGC/ and shift @c;
-	foreach my $i (0..$#c) {
-	    local $_ = $c[$i]->{driver};
-	    my $card = { identifier => ($c[$i]{description} . (@c > 1 && " $i")) };
-	    $card->{type} = $1 if /Card:(.*)/;
-	    $card->{server} = $1 if /Server:(.*)/;
-	    $card->{driver} = $1 if /Driver:(.*)/;
-	    $card->{flags}{needVideoRam} = /86c368|S3 Inc|Tseng.*ET6\d00/;
-	    $card->{busid} = "PCI:$c[$i]{pci_bus}:$c[$i]{pci_device}:$c[$i]{pci_function}";
-	    push @{$card->{lines}}, @{$lines{$card->{identifier}} || []};
-	    push @cards, $card;
-	}
-    }
-    #- take a default on sparc if nothing has been found.
-    if (arch() =~ /^sparc/ && !@cards) {
-        log::l("Using probe with /proc/fb as nothing has been found!");
-	local $_ = cat_("/proc/fb");
-	if (/Mach64/) { push @cards, { server => "Mach64" } }
-	elsif (/Permedia2/) { push @cards, { server => "3DLabs" } }
-	else { push @cards, { server => "Sun24" } }
-    }
-    #- special case for dual head card using only one busid.
-    @cards = map { my $dup = $_->{identifier} =~ /MGA G[45]50/ ? 2 : 1;
-		   if ($dup > 1) {
-		       my @result;
-		       my $orig = $_;
-		       foreach (1..$dup) {
-			   my $card = {};
-			   add2hash($card, $orig);
-			   push @result, $card;
-		       }
-		       @result;
-		   } else {
-		       ($_);
-		   }
-	       } @cards;
-    #- make sure no type are already used, duplicate both screen
-    #- and rename type (because used as id).
-    if (@cards > 1) {
-	my $card = 1;
-	foreach (@cards) {
-	    updateCardAccordingName($_, $_->{type}) if $_->{type};
-	    $_->{type} = "$_->{type} $card";
-	    $card++;
-	}
-    }
-    #- in case of only one cards, remove all busid reference, this will avoid
-    #- need of change of it if the card is moved.
-    #- on many PPC machines, card is on-board, busid is important, leave?
-    @cards == 1 and delete $cards[0]{busid} if arch() !~ /ppc/;
-    @cards;
-};
-
-use mouse;
-package mouse;
-undef *detect;
-*detect = sub {
-    if (arch() =~ /^sparc/) {
-	return fullname2mouse("sunmouse|Sun - Mouse");
-    }
-    if (arch() eq "ppc") {
-        return fullname2mouse(detect_devices::hasMousePS2("usbmouse") ? 
-			      "USB|1 button" :
-			      #- No need to search for an ADB mouse.  If I did, the PPC kernel would
-			      #- find one whether or not I had one installed!  So..  default to it.
-			      "busmouse|1 button");
-    }
-
-    my @wacom;
-    my $fast_mouse_probe = sub {
-	my $auxmouse = detect_devices::hasMousePS2("psaux") && fullname2mouse("PS/2|Standard", unsafe => 1);
-
-	if (modules::get_alias("usb-interface")) {
-	    if (my (@l) = detect_devices::usbMice()) {
-		log::l("found usb mouse $_->{driver} $_->{description} ($_->{type})") foreach @l;
-		eval { modules::load($_) foreach qw(hid mousedev usbmouse) };
-		if (!$@ && detect_devices::tryOpen("usbmouse")) {
-		    my $mouse = fullname2mouse($l[0]{driver} =~ /Mouse:(.*)/ ? $1 : "USB|Generic");
-		    $auxmouse and $mouse->{auxmouse} = $auxmouse; #- for laptop, we kept the PS/2 as secondary (symbolic).
-		    return $mouse;
-		}
-		eval { modules::unload($_) foreach qw(usbmouse mousedev hid) };
-	    }
-	}
-	$auxmouse;
-    };
-
-    if (modules::get_alias("usb-interface")) {
-	my $keep_mouse;
-	if (my (@l) = detect_devices::usbWacom()) {
-	    log::l("found usb wacom $_->{driver} $_->{description} ($_->{type})") foreach @l;
-	    eval { modules::load("wacom"); modules::load("evdev"); };
-	    unless ($@) {
-		foreach (0..$#l) {
-		    detect_devices::tryOpen("input/event$_") and $keep_mouse = 1, push @wacom, "input/event$_";
-		}
-	    }
-	    $keep_mouse or eval { modules::unload("evdev"); modules::unload("wacom"); };
-	}
-    }
-
-    #- at this level, not all possible mice are detected so avoid invoking serial_probe
-    #- which takes a while for its probe.
-    if ($::isStandalone) {
-	my $mouse = $fast_mouse_probe->();
-	$mouse and return ($mouse, @wacom);
-    }
-
-    #- probe serial device to make sure a wacom has been detected.
-    eval { modules::load("serial") };
-    my ($r, @serial_wacom) = mouseconfig(); push @wacom, @serial_wacom;
-
-    if (!$::isStandalone) {
-	my $mouse = $fast_mouse_probe->();
-	$r && $mouse and $r->{auxmouse} = $mouse; #- we kept the auxilliary mouse as PS/2.
-	$r and return ($r, @wacom);
-	$mouse and return ($mouse, @wacom);
-    } else {
-	$r and return ($r, @wacom);
-    }
-
-    #- in case only a wacom has been found, assume an inexistant mouse (necessary).
-    @wacom and return { CLASS      => 'MOUSE',
-			nbuttons   => 2,
-			device     => "nothing",
-			MOUSETYPE  => "Microsoft",
-			XMOUSETYPE => "Microsoft"}, @wacom;
-
-    if (!modules::get_alias("usb-interface") && detect_devices::is_a_recent_computer() && $::isInstall && !$::noauto) {
-	#- special case for non detected usb interface on a box with no mouse.
-	#- we *must* find out if there really is no usb, otherwise the box may
-	#- not be accessible via the keyboard (if the keyboard is USB)
-	#- the only way to know this is to make a full pci probe
-	modules::load_thiskind("usb", '', 'unsafe'); 
-	if (my $mouse = $fast_mouse_probe->()) {
-	    return $mouse;
-	}
-    }
-
-    if (modules::get_alias("usb-interface")) {
-	eval { modules::load($_) foreach qw(hid mousedev usbmouse) };
-	sleep 1;
-	if (!$@ && detect_devices::tryOpen("usbmouse")) {
-	    #- defaults to generic USB mouse on usbmouse.
-	    log::l("defaulting to usb generic mouse");
-	    return fullname2mouse("USB|Generic", unsafe => 1);
-	}
-    }
-
-    #- defaults to generic serial mouse on ttyS0.
-    #- Oops? using return let return a hash ref, if not using it, it return a list directly :-)
-    return fullname2mouse("serial|Generic 2 Button Mouse", unsafe => 1);
-};
diff --git a/perl-install/perl2etags b/perl-install/perl2etags
deleted file mode 100755
index 6eed722c0..000000000
--- a/perl-install/perl2etags
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/usr/bin/perl -p
-
-if (/^/ ... !/^/) {
-    ($package) = /(.*).pm,/;
-    $package =~ s|/|::|g;
-}
-
-s/(\x7F)(sub\s+)?(\w+)(\([^)]*\))?/$1${package}::$3/;
diff --git a/perl-install/pixmaps/X.png b/perl-install/pixmaps/X.png
deleted file mode 100644
index c355a6c67..000000000
--- a/perl-install/pixmaps/X.png
+++ /dev/null
diff --git a/perl-install/pixmaps/arrow_down.xpm b/perl-install/pixmaps/arrow_down.xpm
deleted file mode 100644
index 30cca10b1..000000000
--- a/perl-install/pixmaps/arrow_down.xpm
+++ /dev/null
@@ -1,14 +0,0 @@
-/* XPM */
-static char * arrow_down_xpm[] = {
-"6 8 3 1",
-" 	c None",
-".	c #BABEDA",
-"+	c #000000",
-"..++..",
-"..++..",
-"..++..",
-"..++..",
-"++++++",
-"++++++",
-".++++.",
-"..++.."};
diff --git a/perl-install/pixmaps/arrow_up.xpm b/perl-install/pixmaps/arrow_up.xpm
deleted file mode 100644
index fc3c53131..000000000
--- a/perl-install/pixmaps/arrow_up.xpm
+++ /dev/null
@@ -1,14 +0,0 @@
-/* XPM */
-static char * arrow_up_xpm[] = {
-"6 8 3 1",
-" 	c None",
-".	c #999ABD",
-"+	c #000000",
-"..++..",
-".++++.",
-"++++++",
-"++++++",
-"..++..",
-"..++..",
-"..++..",
-"..++.."};
diff --git a/perl-install/pixmaps/bootdisk.png b/perl-install/pixmaps/bootdisk.png
deleted file mode 100644
index 0d29e613d..000000000
--- a/perl-install/pixmaps/bootdisk.png
+++ /dev/null
diff --git a/perl-install/pixmaps/bootloader.png b/perl-install/pixmaps/bootloader.png
deleted file mode 100644
index 03c2010f7..000000000
--- a/perl-install/pixmaps/bootloader.png
+++ /dev/null
diff --git a/perl-install/pixmaps/colors.png b/perl-install/pixmaps/colors.png
deleted file mode 100644
index 8de1929b4..000000000
--- a/perl-install/pixmaps/colors.png
+++ /dev/null
diff --git a/perl-install/pixmaps/colors16.png b/perl-install/pixmaps/colors16.png
deleted file mode 100644
index 76de54753..000000000
--- a/perl-install/pixmaps/colors16.png
+++ /dev/null
diff --git a/perl-install/pixmaps/colors8.png b/perl-install/pixmaps/colors8.png
deleted file mode 100644
index 904517e2f..000000000
--- a/perl-install/pixmaps/colors8.png
+++ /dev/null
diff --git a/perl-install/pixmaps/default.png b/perl-install/pixmaps/default.png
deleted file mode 100644
index bcbca644d..000000000
--- a/perl-install/pixmaps/default.png
+++ /dev/null
diff --git a/perl-install/pixmaps/eth_card_mini.png b/perl-install/pixmaps/eth_card_mini.png
deleted file mode 100644
index 0af32dbaf..000000000
--- a/perl-install/pixmaps/eth_card_mini.png
+++ /dev/null
diff --git a/perl-install/pixmaps/exit.png b/perl-install/pixmaps/exit.png
deleted file mode 100644
index 7e4e1e1d5..000000000
--- a/perl-install/pixmaps/exit.png
+++ /dev/null
diff --git a/perl-install/pixmaps/harddrive.png b/perl-install/pixmaps/harddrive.png
deleted file mode 100644
index d0b4adf71..000000000
--- a/perl-install/pixmaps/harddrive.png
+++ /dev/null
diff --git a/perl-install/pixmaps/keyboard.png b/perl-install/pixmaps/keyboard.png
deleted file mode 100644
index e5ce33e37..000000000
--- a/perl-install/pixmaps/keyboard.png
+++ /dev/null
diff --git a/perl-install/pixmaps/language.png b/perl-install/pixmaps/language.png
deleted file mode 100644
index 0ad06711f..000000000
--- a/perl-install/pixmaps/language.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-1024.png b/perl-install/pixmaps/monitor-1024.png
deleted file mode 100644
index 6ed801825..000000000
--- a/perl-install/pixmaps/monitor-1024.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-1280.png b/perl-install/pixmaps/monitor-1280.png
deleted file mode 100644
index b338ecb28..000000000
--- a/perl-install/pixmaps/monitor-1280.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-640.png b/perl-install/pixmaps/monitor-640.png
deleted file mode 100644
index e0738b936..000000000
--- a/perl-install/pixmaps/monitor-640.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-800.png b/perl-install/pixmaps/monitor-800.png
deleted file mode 100644
index 04f4b861c..000000000
--- a/perl-install/pixmaps/monitor-800.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor.png b/perl-install/pixmaps/monitor.png
deleted file mode 100644
index bacf844ba..000000000
--- a/perl-install/pixmaps/monitor.png
+++ /dev/null
diff --git a/perl-install/pixmaps/mouse.png b/perl-install/pixmaps/mouse.png
deleted file mode 100644
index dfd58624a..000000000
--- a/perl-install/pixmaps/mouse.png
+++ /dev/null
diff --git a/perl-install/pixmaps/mouse_3b+.xpm b/perl-install/pixmaps/mouse_3b+.xpm
deleted file mode 100644
index b424fc722..000000000
--- a/perl-install/pixmaps/mouse_3b+.xpm
+++ /dev/null
@@ -1,386 +0,0 @@
-/* XPM */
-static char * mouse_3b+_xpm[] = {
-"210 350 33 1",
-" 	c None",
-".	c #020202",
-"+	c #142753",
-"@	c #FE9A02",
-"#	c #BD8B25",
-"$	c #9E9EC1",
-"%	c #525E81",
-"&	c #F2AD19",
-"*	c #A3A4C3",
-"=	c #7B673F",
-"-	c #6F7892",
-";	c #4B5576",
-">	c #FEB212",
-",	c #77819E",
-"'	c #FEBA20",
-")	c #414A66",
-"!	c #F2B226",
-"~	c #AF8F4B",
-"{	c #E6AA32",
-"]	c #F2B22A",
-"^	c #384365",
-"/	c #0A1128",
-"(	c #33395F",
-"_	c #8089A6",
-":	c #AEB2CF",
-"<	c #898BA4",
-"[	c #0F1C3D",
-"}	c #BABEDA",
-"|	c #6D6E91",
-"1	c #A9ADCA",
-"2	c #283861",
-"3	c #999ABD",
-"4	c #606C8C",
-"                                                                                                |4;-333[/[                                                                                                        ",
-"                                                                                                44;,333[[/                                                                                                        ",
-"                                                                                                44)_33-[/[                                                                                                        ",
-"                                                                                                4%;_33-[[/                                                                                                        ",
-"                                                                                                4%)3334[/[                                                                                                        ",
-"                                                                                                %4)$33;[/                                                                                                         ",
-"                                                                                                4%;$33;[/                                                                                                         ",
-"                                                                                                %%%333)[[                                                                                                         ",
-"                                                                                                %%%3332[/                                                                                                         ",
-"                                                                                                %%%3332[/                                                                                                         ",
-"                                                                                                %%%$332[/                                                                                                         ",
-"                                                                                               |%;-33<2[[                                                                                                         ",
-"                                                                                               4%;|333[//                                                                                                         ",
-"                                                                                               %%)4333[[[                                                                                                         ",
-"                                                                                               4;;|33<[/[                                                                                                         ",
-"                                                                                               4;;4333[[/                                                                                                         ",
-"                                                                                               4%;|333[[[                                                                                                         ",
-"                                                                                               %%;_33<[[/                                                                                                         ",
-"                                                                                               %%)_333[[[                                                                                                         ",
-"                                                                                               %%)_333[[/                                                                                                         ",
-"                                                                                               ;;),33<[[[                                                                                                         ",
-"                                                                                               ;;)_333[[/                                                                                                         ",
-"                                                                                               ;;^,333[[[                                                                                                         ",
-"                                                                                               %))433<[[/                                                                                                         ",
-"                                                                                               4;)4333[[[                                                                                                         ",
-"                                                                                               4;;-333[[/                                                                                                         ",
-"                                                                                               %;)433<+[[                                                                                                         ",
-"                                                                                               %;)43332[/                                                                                                         ",
-"                                                                                               ;)^|33<([[                                                                                                         ",
-"                                                                                                ;)%3332[/                                                                                                         ",
-"                                                                                                ;^;3332[[                                                                                                         ",
-"                                                                                                ;;;333^[[                                                                                                         ",
-"                                                                                                4%)$33%[[                                                                                                         ",
-"                                                                                                ,4^33$%+[++                                                                                                       ",
-"                                                                                               $34^333,2++22                                                                                                      ",
-"                                                                                              13_%-33333)2222                                                                                                     ",
-"                                                                                             33_4_333333<;22++                                                                                                    ",
-"                                                                                             ,,4_3$33333$3%2+++                                                                                                   ",
-"                                                                                             %%433333333333%[[[                                                                                                   ",
-"                                                                                             ;)^333333333333+/[                                                                                                   ",
-"                                                                                             ))2$33333333333([[                                                                                                   ",
-"                                                                                             ;;^$33<33333333)[[                                                                                                   ",
-"                                                                                             ))^$33333333333%[/[                                                                                                  ",
-"                                                                                             ;)^,333333<3333-[[[                                                                                                  ",
-"                                                                                             ;;),333<3333333_+/[                                                                                                  ",
-"                                                                                             ;))_333333333333+[[                                                                                                  ",
-"                                                                                             ;))|33333333<3332[[                                                                                                  ",
-"                                                                                             %)^|333333333333;/[                                                                                                  ",
-"                                                                                             %%)4333333333333%[[[                                                                                                 ",
-"                                                                                             _4;|333333333333-[[[                                                                                                 ",
-"                                                                                              ,%;-|;%%%))%%%%4+[+                                                                                                 ",
-"                                                                                          1:1*<%(++++[++[+[+[+[2(%-,_,                                                                                            ",
-"                                                                                      :1111$$<|)2[+[+++))+++[++2^%|,,,,,,                                                                                         ",
-"                                                                                   ::::1$3<,||-,<3:}}}}}:}}}}:33,4-%44--,-,--                                                                                     ",
-"                                                                                 :::*$3_-,<1}}}}}}}}}}}}}}:}}:}:}}}}1_-%%4||4-4                                                                                   ",
-"                                                                              :::1$3_,_$}}}}}}}:1**$$33333333$$$*1::}}}}1,;;44|4|                                                                                 ",
-"                                                                            :::1*<,4),}}::1*333333333$3$3333$3333333$}}:},22);%%444%                                                                              ",
-"                                                                          ::::*<4,{;2+}}3333333333$<$<33333333<33333331}}2+[%=2);%%44                                                                             ",
-"                                                                         :::$<-<&>!#++,}*333333333$3$3333333<3$333333331_+[(>>#=2^;;%%%                                                                           ",
-"                                                                       :::*3-,{'>>>>2+;}:3333333333$<3333333$$<333333333;++=>'>&{=2^);;;%                                                                         ",
-"                                                                      ::13--{>>>>>>>=[+}}333333<3333$333<3333$3$3333333$2[+#>>>>>&#;(^);;;                                                                        ",
-"                                                                    ::1*<-~>>>>>>>>&#++$}$333333333333333333$<$<3333333<+++>'>>>>'>>#22^)));                                                                      ",
-"                                                                   ::13,='''>>&&@&>>#+[-}}333333333333333333$333333333$-+[)>>>>>>>>>>&=22))))                                                                     ",
-"                                                                 ::11<-~'>&&@@@@@>>>>++%:}33333333333333333333333<3333$4[+=>>>>>>>>>>>'#22^)))^                                                                   ",
-"                                                                }:1*,-&''&@@@@@@@>>'>)+(}}1$333333<333333333333333<3331^++#>>'>>>>>>>>>>{;+^^^^^                                                                  ",
-"                                                               :1*34~''&@@@@@@@@&>>>&=++}}}333333333<33333333333$33333}+++#>>>>>'>>>>>>>>'=+2^^^(                                                                 ",
-"                                                              ::1<-#'&@@@@@@@@@@>>>>>=[+3}}1333333333333<3333333333333}+++''>>>>>>'>>>>>>>'#2+2^2^                                                                ",
-"                                                             :1*_4{'&@@@@@@@@@@'>>>>>#+[3}}:3333<$3$%[[++[+23333$<3$313+[(>>>'>>>>>>>>>>>>'>{^22^22                                                               ",
-"                                                            ::3,=!'@@@@@@@@@@@&>>>>>>#++,}}}*33333(^2+[[[[[+((,33$3331<++)>>>>>'>>>>'>>'>>>>>&)22222                                                              ",
-"                                                           11$,,!>@@@@@@@@@@@&>>>>>>>&+[|}}}:33333[/..../././[-3333$3}|+[=>>>>>>>'>>>>>>>>>>>>&=+22222                                                            ",
-"                                                          :13--'>@@@@@@@@@@@@>>>>'>>>>++%}}:}33333+.///./././[-3<3333}|[+=>>>>>>>>>>>'>>>>>>>>>>=+2222+                                                           ",
-"                                                         :*3-,>&@@@@@@@@@@@&>>'>>>>>>>2+)}}}}13333^(2[[[[[[+(^_$$3$3$}%+[#>>>'>>>>'>>>>>>>>>>>>&&=+2+2++                                                          ",
-"                                                        1*3-~>@@@@@@@@@@@@@>>>>>>>>>>>)[)}}}}}3333++[+[+[++++[,33<$31}^+[#>>>>>>>>>>>>>'>>>>>>>>>&=+2+2+                                                          ",
-"                                                       113-->>@@@@@@@@@@@@>>>>>>>>>>>>)+2:}}:}1333+..........[-33$331})++#>>>>>'>>>>'>>>>>>>>>>>>&>=+++++                                                         ",
-"                                                      1*$-='@@@@@@@@@@@@@>>>>>>'>>>&>>=+[}}}}}:$33[//////////[,3<$331}2+[&>>'>>>>'>>>>>>>'>>>>>>>>>>=+2+++                                                        ",
-"                                                     11*_,'&@@@@@@@@@@@@>>>>'>>>>>>>>>=++}:}}}}*33%%^[////[2%%_3$3331:[++>>>>>>>>>>>>>'>>>>>>>>>>>>>&=++2++                                                       ",
-"                                                    :*3,=!>@@@@@@@@@@@@&>>>>>>>>'>>>>>=+[}}}}:}:33++[++++[+[++,333$3:}+++>>>>>'>>>>'>>>>>>>'>>>>>>>>>>)+++++                                                      ",
-"                                                   1**_-!&@@@@@@@@@@@@>>>>>>>'>>>>>>>>#++<}:}}}}*3+..........[-3$<33}:+[(>>'>>>>'>>>>>>>'>>>>>>>>>>>>>>^2++++                                                     ",
-"                                                  1**_4{>@@@@@@@@@@@@&>>>>'>>>>>>>>>>>#[+3}}}}}::3+//////////[,33$33}$++)>>>>>>>>>>>>'>>>>>>>>>>>>>>>>>&++2[++                                                    ",
-"                                                  1*<4{>@@@@@@@@@@@@&>>>>>>>>'>>'>>>>>#++3}:}}}}}$%%^[////[2%%<3$<33}3[[)>>>'>>>>>'>>>>>>'>>>>>>>>>>>>>>@2++[++                                                   ",
-"                                                 1*<-~&@@@@@@@@@@@@@>>>>'>>>>>>>>>'>>>#+[3}}}:}}}1^^2[[[[[[+^^,33333}3++)>>>>>'>>>>>>>>>>>>'>>'>>>>>>>>>!#+++[+                                                   ",
-"                                                1*3,-'@@@@@@@@@@@@>>>>>>>>>>>'>>>>>>>>][+_:}}}}:}}+../...../.[,333$$:3+[;>>>>>>>>>>'>>'>>>>>>>>>>>>>>>>>>>=+++++                                                  ",
-"                                               1*3,-&>@@@@@@@@@@@@>>>>'>>>'>>>>'>>>>>>'[+|}:}}}}}:+[///[/[///+,3333$}<++='>>'>>>'>>>>>>>'>>>>>>>'>>>>>>>>>>^+++[+                                                 ",
-"                                               **<4{>@@@@@@@@@@@&>>>>>>>>>>>>>>>>'>>>>>++|}}}}:}}}4%^[////[+;%<33331}<++=>>>>>>>>>>'>>>>>>'>>'>>>>>>>>>>>>>@++++[+                                                ",
-"                                              13<-~'@@@@@@@@@@@@>>>>'>>>'>>>>>>>>>>'>>>++4}:}}}}:}++++[+++++++-33333}4++='>>>>'>>>>>>'>>>>>>>>>>>>'>>>>>>>>>#++++[                                                ",
-"                                             **3-,'@@@@@@@@@@@&>>'>>>>>>>>'>>'>>>>>>'>][+|}}}:}}}:+..........[-33333}-[+=>>'>>&>>>>>>>>>>>>>>>'>>>>>>>>>>>>>>=+++++                                               ",
-"                                             **_=!>@@@@@@@@@@@>>>>>>>>>>>>>>>>>>>'>>>>'++4}}}}}}}}[//////////[,333$3}4++='>>>>>>'>>>>>'>>'>>'>>>>>>>'>>>'>>>>>^++[++                                              ",
-"                                            *3_%{>@@@@@@@@@@>'>>>>>'>>>>>>>>>>'>>>>>>>&^+|:}}}:}}}|4)[/////2%%<333$$}|++=>>>>>>>>>>'>>>>>>>>>>>'>>>>>>>>&>>>>>#++++[                                              ",
-"                                           **<,,'&@@@@@@@@@@>>>>'>>>>'>>>>'>>>>>>>>>>>>)+;}}:}}}:}+++++++++++[,3333$}4++#'>>'>>>>'>>>>>'>>>>>>>>>'>>>>>>&&>>>>>=+++[[                                             ",
-"                                           *3,4&>@@@@@@@@@&>>'>>>>>>>>>'>>>'>>>>>>>>>>>)+^}}}}}}}}+..........[-3333$}|++#>>>>>'>>>>>'>>>>'>>>>>>>>>>>>>>>>@>>>>>(+++++                                            ",
-"                                          *$_4#'@@@@@@@@@@>>>>>>>>>'>>>>>>>>>'>>>>>>>>>)+^}}}:}}}:+//////////[,3333*}4[+#'>>>>>>>>>>>>>>>>>'>>'>>>>'>>>>>>>&>>>>@[+[+[                                            ",
-"                                         **<-~>&@@@@@@@@>>>>>'>>'>>>>>>>>>>>>>'>>'>>>>>)+):}}}:}}}))2[[[[[[+^^-3333$}|++#>>>>>'>>>>>'>>>>>>>>>>>'>>>>>>>>>&&>>>!>=+++[+                                           ",
-"                                         $3_4&>@@@@@@@@@>>>>>>>>>>>>>>'>>'>>>>>>>>>>>>>)+)}}}}}}:}+[[[[[[[[[[[,33333}4++#'>>>>>>'>>>>>'>>'>>>>>>>>>>'>>>>>>>@>>>>>^[++[                                           ",
-"                                        *3<4~'@@@@@@@@&>>>>>>>>>'>>>>>>>>>>>>>>>>'>>>>>)+):}}:}}}:+..........[-3333$}|++#>'>>>>>>>>>>>>>>>>>'>>>>'>>>'>>>>>>&@>>>>#++[++                                          ",
-"                                       $3<,='>@@@@@@@@&>>>>>>>'>>>'>>>>'>>>'>>>'>>>'>>>)+)}}}}}}}}+[[[[[[[[[[[,33333};++#>>>'>>>>'>>>>>'>>>>>>'>>>>>>>>'>>>>>@@>>>>=+[[[+                                         ",
-"                                       $$_4{>@@@@@@@&>>>>>>'>>>>>>>>'>>>>>>>'>>>>>>>>>>)+):}}}:}}}44^[/////2%%,33333})[+#>>>>>'>>>>>'>>>>'>>>>>>>>>>>>>>>>>>>>@&>>>&+++[+                                         ",
-"                                      $3_-~!&@@@@@@@&>>>>'>>>>>>>>>>>>>>>'>>>>>>>>>>>>>)+)}:}}}:}:+[[[/[[[[[[+-3333<})++#'>>>>>>>>'>>>>>>>>'>>>>'>>'>>>>>>>>>>@@>>>>#[++[+                                        ",
-"                                      33,4!>@@@@@@@>>>>>>>>>>>'>>>>>>>'>>>>>>>>'>>>>>>>)+)}}:}}}}}+..........[-3333$})++#>>>>>>'>>>>'>>>>>>>>>>>>>>>>>>>>>>>>>>@@&>&&2+++[                                        ",
-"                                     $3_4~'&@@@@@@>>>>>>>>>>'>>>'>>'>>>>>>>>>'>>>'>>>>>)+)}}}}:}}}[[[[[[[[[[[[,3<333}^++#'>>'>>>>>>>>>'>>>>>'>>>>'>>>'>>'>>>>>>@@@>>>#+[+[+                                       ",
-"                                     33,-'>@@@@@@>>>>>>>>>>>>>>>>>>>>>>>>>'>>>>>>>>>>>>)+):}}}}}:}|4^[/////2%%<3$33$})[+#>>>>>>>>>>>>>>>>'>>>>'>>>>>>>>>>>>>>>>@@@@>>>)+[+[                                       ",
-"                                    $3_4#'&@@@@@>>>>>>'>>'>>>>>>>>>>>'>>'>>>>>>>>>>>>>>)+)}}:}}}}}+[[[[[[[[[[+,33333})++#'>>>>'>>'>>>>>'>>>>>>>>>>>'>>>>>>>>>>>>@@@&>>{[++[+                                      ",
-"                                    3_,=>>@@@@@>>>>>>>>>>>>>>>>'>>'>>>>>>>>>>>'>>>>>>>>)+^}}}:}}}}+..........[-33333})[+#>>>>>>>>>>>'>>>>>'>>>>>'>>>'>>>'>>>>>>>@@@@&>>=[++[[                                     ",
-"                                   $<_4{>&@@@@>>>'>>'>>>>>>>'>>>>>>>>>'>>>>'>>>>'>>>>>>)+^}}}}}:}:+[[[[[[[[[[[-333$1}4++#'>>'>>>>>>>>>>>>>>>'>>>>>>>>>'>>>'>>>>>@@@@@>>{[+[+[                                     ",
-"                                   3<-->>@@@@&>>>>>>>>'>>'>>>>>>>>'>>>>>'>>>>>>>>>>>>>>)+)}}}}}}}}44^[/////24|3333$:}4[+#>>>>'>>'>>>'>>>>>>>>'>>>>>>>>>>>>>>>>>>&@@@@&>>=++[[+                                    ",
-"                                  33,4&>&@@@@>>>>>>>>>>>>>>>>>>'>>>>'>>>>>>>>'>>>>'>>>>)[)}:}:}}}}+[[[[[[[[[[[31333}}|++#'>>>>>>>>'>>>'>>'>>>>>'>>>>'>>>>>>>>>>>>@@@@@&>&+++[[                                    ",
-"                                  3<-->>@@@&'>'>>'>>>>>>>'>>'>>>>>>>>>>>>>'>>>>'>>>>>>>++%}}}}}:}}+..........[<}::}}}4++#>>>>'>>>>>>>>>>>>>>>>>>>'>>>>>'>>>'>>>>>@@@@@@&>=+[+[+                                   ",
-"                                 3<_%&>&@@@>>>>>>>>'>>'>>>>>>>>>>>'>>>>>>>>>>>>>>>>>>>>++4}}}}}}}:++[+++[+[+++3}}}}}}4++#>>>>>>'>>>>>>>'>>>>>'>>>>>>>>>>>'>>>'>>>@@@@@@@'&+++[[                                   ",
-"                                 3<-,'>@@@>>>>'>>>>>>>>>>>>>'>>'>>>>>>'>>>>'>>>'>>>>>>>++|}:}}:}}}4|^[////[244*}}}}}}|+[=>>>>>>>>>>>'>>>>>'>>>>>>>>>>>>>>>>>>>>>>@@@@@@@&>=++[+[                                  ",
-"                                $<_4&>>@@>>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>'>>>>>>>>'>>>>>++4}}}}}}:}+[///[////[[3:}:}}}4++='>>>>>>>'>>>>>>>>>>>>>'>>'>>>'>>>>>>>>>>&@@@@@@&>&++[[[                                  ",
-"                                3_-->>@@>>'>>>>>>>>'>>'>>>>>'>>>>>>'>>>>>>>'>>>>>>>>>>&++|:}}:}}}}+..........[3}}}}}:3++=>>'>>'>>>>>>>>'>>>>'>>>>>>'>>>>>'>>>>>>>@@@@@@@@&>=+++[                                  ",
-"                               <<_%&>'@&>>>>'>>>>'>>>>>>>>>>>>'>>'>>>'>>>>>>>'>>>>>>>>{[+4}}}}}:}}[++[+++[+++[3:}:}}}3++='>>>>>>>>>'>>>>>'>>>>>>'>>>>>>>>>>'>>>>>&@@@@@@@@>{[++[[                                 ",
-"                               3<,='>>@>>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>>'>>>>>>'>>'>>>&~++$}}:}}}:}3<%[.././^<3:}}}}}:3[[=>>'>>>>'>>>'>>>>>>>>'>>>>>>>'>>>>>>>>>>>@@@@@@@@@&&=[++[                                 ",
-"                              <3,4{!>&&>>>>>>>>>>>>>'>>>>'>>>>>'>>>>>>>>>'>>>>>>>>>>>>#[+<}}}}}}}}+[[[[[[[[[[+_}}}}}}3+[)>>>>'>>>>>>>>'>>>>>>>>>>>>>>>>'>>>>'>>>>@@@@@@@@@@&{[+[[[                                ",
-"                              <_,|>>&&>>>'>>>>>>>'>>>>>>>>>>'>>>>>>'>>>>>>>>>>'>>>>>>>#++3}}:}}}}:+..........[3}:}}}:}++)>>>>>>>>>>>>>>>>'>>>>>>'>>>>>>>>'>>>>>>'@@@@@@@@@@@>;++[+                                ",
-"                             3<_4~>>&>>>>>>'>>'>>>>>>>'>>>>>>>>>>'>>>'>>>>>'>>>>'>>>>>=++3}}}}:}}}+[+[++[+[+++<}}}}}}}[+)>>>>>>'>>'>>>>>>>>'>>>>>>'>>>>>>>>>>>>>&@@@@@@@@@@@>#++[[[                               ",
-"                             <_-4'>&&>'>>>>>>>>>>>>'>>>>>'>>>>'>>>>>>>>>'>>>>>>>>>>>>'=[+}}:}}}}:}44)[/////2441}}:}}}}+[+>>>'>>>>>>'>>'>>>>>>>>>>>>>>'>>>>>'>>>>&@@@@@@@@@@@&>^++[+                               ",
-"                             <_4#>>&>>>>>'>>>>>>'>>>>>>'>>>'>>>>>>>>>>>>>>>>>>>>>'>>>>=+[}}}}}}}}}+////[////[[3}}}}:}}^[+>>>>>>>'>>>>>>>'>>>>'>>>>>'>>>'>>>>>>>>@@@@@@@@@@@@@>#[+[[+                              ",
-"                            <<,%#>&>>>'>>>'>>'>>>>>>'>>>>>>>>>>>'>>'>>>>>>>'>>'>>>>>>>;++}}:}:}}}}+..........[3:}}}}}})++>>>>'>>>>>'>>>>>>'>>>>>'>>>>>>>>>>'>>>&@@@@@@@@@@@@@>#[+[[[                              ",
-"                            <_-^=>>>>>>>>>>>>>>>>>>>>>>>>>>>>>'>>>>>>'>>'>>>>>>>>>>>>>)[^}}}}}}:}:++[++[+++[+[3:}}:}}})[+#>>>>>>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>>>>@@@@@@@@@@@@@>#[++[[                              ",
-"                            __%2=>>>>>>>>>>>>'>>'>>>'>>>'>>'>>>>'>>>>>>>>>>>>>>>>'>>>>(+)}}}:}}}}}44)[////[244*}}}}:}}4++#'>>>>>>>>>>>>>>>>'>>>>'>>>'>>'>>>>>>>@@@@@@@@@@@@@@@=+[++[[                             ",
-"                           3_-;+(>>>>>>>>>>'>>>>>>'>>>'>>>>>>>>>>>'>>>>>>>'>>'>>>>>>>>++)}:}}}:}}}+//////////+<}}}}}}}4++='>>>>'>>>>>>'>>>>>>>>>>>'>>>>>>>>'>>>@@@@@@@@@@@@@@>(++[+[[                             ",
-"                           <,4;++#>>'>>>'>>>>'>>>>>>>>>>'>>>>>>>>>>>'>>'>>>>>>>>>'>>>{++4}}}}}}}}:+..........[3:}}}:}}<++=>'>>>>'>>'>>>'>>>>>>>>>>>>>>>>'>>>>>@@@@@@@@@@@@@@@{+++++[[+                            ",
-"                          <_,%$++=>>>>'>>>>>>>>'>>>>>>>>>>'>>>>>'>>>>>>>>>>'>>>'>>>>>#++|}}:}}}:}}+[+++[++++++3}}:}}}}3++=>>>>>>>>>>>>>>>'>>>'>>>>>>>'>>>>>>>&@@@@@@@@@@@@@@@=+[+2_+/[                            ",
-"                          <,4-})[[{>>>>>>>>>>>>>>>'>>>>>>>>>>'>>>>>>>>>>'>>>'>>>>>>>&#++<}}}:}}}}}44^[/////244$}}}}:}}$+[)>'>>>>'>>>>>>>>>'>>>'>>>>>>>>>>>>>&@@@@@@@@@@@@@@&&++++-}++[                            ",
-"                          _,%*}3+[)>>>>>>'>>>>>>>>>>'>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>>>=[+3}}}}}}}}}+//////////[3}}}}}}}}+[(>>>'>>>>'>>'>>>>>>>>>>'>>'>>>'>>>>@@@@@@@@@@@@@@@&)+[+21};+[[                           ",
-"                         <_-4}}})+[#>>'>>>>'>>>>>>>>>'>>'>>>>>>>>'>>>>>>>>>>>>>'>>>>>;++1}}}}:}:}}+..........[3:}}}}:}}2++>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>@@@@@@@@@@@@@@@&#++++_}}3+[[                           ",
-"                         _,4_}}}*++[#>>>>>>>>'>>'>>>>>>>>>>>>>'>>>>>>>'>>'>>>'>>>'>>>;[+}}}:}}}}}:+++[++++++[+3}:}}}}}:)[+{>>>>>>>>'>>>'>>>'>>>>>'>>>'>>>>@@@@@@@@@@@@@@@&@+[+[%}}}}(+[                           ",
-"                        <<-%:}}}}<+++{>>>>>>>>>>>>>>>'>>>>>'>>>>>>>'>>>>>>'>>>>>>>>>>++^}:}}}}:}}}:}4/.....)}:}}}}}:}}}4+[#>>'>>'>>>>>>>'>>>>>'>>>>>>>>>>@@@@@@@@@@@@@@&>#++++^1}}:}-[[[                          ",
-"                        <_--}}}}}}-+[+#>>>>'>>>>>>'>>>>'>>>>>>>>>'>>>>>>>>>>>>>>>>>>&++%}}}}}}}}}}}}|++[+++)}}}:}}}}}:}-++=>>>>>>>>>>'>>>>>>>>>>>>>'>>>&@@@@@@@@@@@@@@@>{+++[^1}1$:}1[[[                          ",
-"                        _,%3:}}:}}}4+++='>>>'>>'>>>>>>>>>>>'>>'>>>>'>>>>>>>>>>'>>>>>#++4:}}:}}}:}}}}}:}}}:}}}}}}}}:}}}}3++=>>'>>>>'>>>>>'>>>>>>>'>>>>&&@@@@@@@@@@@@@@>>=++[+^:}1331}};[+[                         ",
-"                       <,-%}}}}}}}}:,+++)&>>>>>>>>>>>>>>'>>>>>>>>>>>>'>>>>'>>>>>'>>>=++_}}}}}:}}}:}}}}}}}}}:}}:}}}}}}}}$++)>>>>'>>>>>>>>>>'>>'>>>>>>&@@@@@@@@@@@@@@>>&;+[++;1}*3$33:},+[[                         ",
-"                       <,--}:}}:}}}}}3+[++=>>>>'>>>>>'>>>>>'>>>>>>>>>>>'>>>'>>>>>>''=++$}}:}}}}}}}}}}:}}:}}}}}}:}}:}:}}}+[+>>>>>>>>>>>>>>>>>>>>>>>>@@@@@@@@@@@@@@&>>=+++++4}:333333:}1[[[                         ",
-"                       ,,%1}}}}}}:}}}}:;+++(#&>>>>>'>>>>>>>>>'>>>>>'>>>>>>>>>'>>>>>>^++}:}}}:}}:}:}:}}}}}}:}}}}}}}}}}}:})++{>>>>>'>>'>>>>>>'>>>>&@@@@@@@@@@@@@@&&>#(++[+2<}1$33333$*}};[[[                        ",
-"                      <,-%}}:}}}}}}}}}}},2[+[2#&'>>>>>'>>>>>>>>>'>>>>>>>>>>>>>>>>>>&++(}}}}}}}}}}}}}}}}:}}}}:}}:}}}:}}}}4+[#>>'>>>>>>'>>'>>>>>>@@@@@@@@@@@@@&>>&#(+++++|}}$33333333$}}_+[+                        ",
-"                      _,4,}}}}:}:}}:}:}}}142[+[+={>>>>>>'>>>>>'>>>>>>'>>'>>>>>'>>>>{+[%}}:}}}:}}}}}}}:}}}:}}}}}}}:}}}}:},+[='>>>>>'>>>>>>>>>&@@@@@@@@@@@@&>>>{=([[[++%*}1$3333333333:}:+[[                        ",
-"                      ,,%$}}}}}}}}}}}}:}}}}1-+++[[)={>>>>>>'>>>>>>'>>>>>>>>'>>>>>>&#++-}}}:}}}}}:}:}}}}}}}}}}}:}}}}:}}}}$++)>>>'>>>>>>>>>>@@@@@@@@@&@>>>>>{#)[[++++;*}:3333333333333*}}%[[[                       ",
-"                     <_-%}}:}}}}}:}}}}}}}}}}}:_2++[++^={>>>>>>>>>>>>>>'>>>>>>>>'>>>=[+*:}}}}:}}}}}}}}}}:}}:}}}}}}}}}}:}}}2[+'>>>>>>>>>&@@@@@@@@>&>>&>>>{=;[[[+++2|:}:$3333333333<3333:}_[+[                       ",
-"                     _,4,}}}:}:}}}}:}}}}}}}}}}}}$%+++++[+;#{>>>>>>>'>>>'>>>>'>>>>>&^[2}}}}}}}}}:}}:}:}}}}}}}}:}}:}}}}}}:})+[{>>>>>&&@&@@&@&>'>>>>>>@#;2++[++++;_}}:$3$33333<3333$333$:}:+[[                       ",
-"                     ,,%*}}}}}}}}}}}}:}:}}:}:}:}}}}<%+++[[[[+)=#{>>>>>>>>>'>>>>>>>@++%}}:}}:}}}}}}}}}}:}}:}}}}}}}}:}}}}}}-+[=>>>&&&&>>>>>>>>>>&#=;+[[+[++++%,:}}*$333333333333333333$*}})[[[                      ",
-"                    <,-%}}}}}}}:}}:}}}}}}}}}}}}}}}}}}}*|)++++++[[+)==#@'>>>>>>>>>&~++_}}}:}}:}}:}}}:}}}}}}}}:}}:}}}}:}}}}$++^>>>&>&>>>>&&#==)++[+[++[+[^%3:}}}1333333333333333333333$3}},+[[                      ",
-"                    _,4,}}}:}:}}}}}}:}}}:}}}}}}:}}}}:}}}}}$4;++++[++++++()==###&>>([+}}}}}}:}:}}}:}}}:}}:}}}}}}:}}:}}}:}:}([+{&!###==;^[+++++[+++++)|<:}}}}**3$333333333<333<333333333:}*[[[                      ",
-"                    ,-%3}}}}}}}}}:}}}:}}}}:}:}}}}:}}}}}}}}:}}}1<|)^[+++[+[[+[+++[++++;4444_$$_$_3*}:}}}}}:}}:}}13_$3<3_|4|^++[++++[[[[[+[+[+[2)|,3}}}}}}:*33$3333333333333333333333333*}})[[                      ",
-"                   _,-%}}:}}}}:}}}}}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}$34%)^[++[++++++++++++++++++[+++++[+++[+++[+++++++++++[+[++[++++++2))|_3:}}}}}}}:1$33$3333333333<333333333333333333}}-+[[                     ",
-"                   ,,4-}}}}:}}}}}:}}}:}:}}}:}:}}:}}}}:}}}}}}:}}}}}}:}}}}}}:}33<44;)^^+[+[+[+[+[+++[+[+++[+++[+++[++[+[++[+++(^^%|433$}}}}}}:}:}}}:1$$3$33$3333$<33333333333333333<33333:}$+[[                     ",
-"                   _,%3}}}}}}}}:}}}:}}}}}:}}}}}}}}:}}}}}}}:}}}}}}}}}11:}}}}}:}}}}}}}}}}}}:333<33<,444444444|444|_33<33<1:}}}}}}}}}}}}:}}}}}}::13333333333333333333333333333<333333333331}}2[[                     ",
-"                   --;::}}:}:}}}}}}}}}:}}}}}:}}:}}}}}:}:}}}}}:}}:}}}}}1$$$$*::}}:}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}:}:}}}:::3$$3333$33333333333333333333333333333333333333}}%+[[                    ",
-"                  <,4-}}}}}}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}1*$33<$$*$1*:::}}:}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}}}}:}:}:113*333333333333333333333333333333333333333<3333333333:}<[[[                    ",
-"                  ,-4_}}}:}}:}:}}}}:}}}}:}}:}}:}}}:}}}}:}:}}:}}:}}}:}}:}}}}1$$3$33333333$$$3*1**1111:1}:}}}:}:}}}}:1:1:*11**$*333$333$333333333333333333333<3333333333<3333333333<333333:}}+[[                    ",
-"                  ,-%:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}:*3333333333$333333$$$_333333$3$$<$33333333333$33333333333333333333333333<333333333<333<33333333333333333333}};[[                    ",
-"                 ,,4%}}}:}}:}}}:}}:}}}}}:}}:}}}:}}}}}}:}}:}}:}}:}}}}:}}}}}}:}}}:*$333333$3333333$$$$33333$<3$$$<33333333333333333333333333333333333<333333333333333$33333333333333<333333}}-[[[                   ",
-"                 ,,4,}:}}}}}}:}}}}}}:}}}}}}}}:}}}:}}}}}}}}}}}}}}}:}}}}}}}:}}}:}}}}1$33333<$33333_$$$33333333$333333333333333333333333333333333333333333333333333<3333333333333333333333331}*+[[                   ",
-"                 ,-%3}}}}}:}}}}}}:}}}}}:}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}:}}}}}}}}}}:}}1*333$333333$$_333$<33$<3$<33333333333333333333<333333<333<33333333333<33333333333333<333333333333333*}}+[[                   ",
-"                 --;}}}}:}}}:}}:}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}:}*3333333333333333$$3$33$33333333<33<3333333333<$<333333333333333<3333<333333<333<$3333333333<333333:}%[[[                  ",
-"                ,,44}}}}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}:}}:}}:}}:}:}}:}}}}:}}}:}}}}:}}}}:}}*33333333333333<3$<333<333333333333<3333333333$3333333<333333333333333333333333333<33333333333333}}_[[[                  ",
-"                ,-4_}:}}}}:}}:}}}:}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}::$33333333333$$3$3333333<3333333$33333333333333333333333333333333333<333333333333333333333333331}:+[[                  ",
-"                ,-%$}}}:}}}}}}:}}}}}}}:}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}}}}:}}}}:}}}}}}}}}:}}}}}1*33333333333333333333333333333333333333$<3333333333<33333333333333333333333333<33333<3333333*}}2[[                  ",
-"               _,4;}}}}}}:}}}}}}}}:}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}:}}}}}:}}}:}:}}}}:}}}}}}}}}:$333333333333333333333333333<3333<$33$33333333333333333333333333333333333333333333333333333}}%[[[                 ",
-"               ,-44}}}:}}}:}}}}:}}}}}:}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}}}}:}}}}}}}}}}:}}}}}}:}:}:}}}:*3333333333333<3333333333333333$<33<333333<33333333<33333333333333333<3333333333333333333*},[[[                 ",
-"               ,-4_}}}}}}}}}:}}}}:}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}:}}:}}:}}}}}}}:}}}}}}}:}}}}*333333<3333333333333333333333333$3333333333333<$333333<3333333<333333333<333333333333$1}1+[[                 ",
-"               --%*:}}:}}}}}}}:}}}}}:}:}}}}:}:}}:}}}}}}}:}}:}:}}:}}}}}:}}}}}}}}}}}:}:}}}}}}}:}}}}:}}}:*3<3333333333333<333333333333333$<3333333333333333333333333333333333333333333<33333333}}2[[                 ",
-"               ,4%}}}}}}:}:}}}}}:}}}}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}:}}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}*33333333333<$3333333<3333333333333333<333333333333333333333333333333333333333333333:}%[[                 ",
-"              _-4|}}}:}}}}}}}:}}}:}}}}}}}}}}:}}:}}}:}}}}:}}}:}}:}}}}}:}}}}}}}}}:}}}:}:}}}}}:}}:}}}:}}:}}}:*3<33333333333<33333333<333333$<333333333333333333<33<3333333333333<333333<3333333:}_+[[                ",
-"              ,|4_}}}}}:}}}:}}}}}}}:}:}}:}}}}}}}}}}}}}}}}}:}}}}}}:}}}}}:}}:}}}}}}:}}}}}:}}}}}}}}:}}}}}}:}}}}*333<3333333333333333333333333333333333333<3333333333333333333333333333333333333*}3[[[                ",
-"              --%3}}:}}}:}}}}}:}}}}}}}}}}:}}:}}}:}}}:}}}}}}}}}:}}}}}:}}}}}}:}}}}}}}}:}}}}}:}}:}}}}}}:}}}}}}}}:*33333333333333333333333333<333333333~333333333333333<333<333333333333333333333}}+[[                ",
-"              -4;}}}}}}}}}}}}}}}:}:}}}:}}}}}}}:}}}:}}}:}:}}}:}}}:}}}}}:}}}}}}:}:}}}}}}:}}}}}}}}:}}:}}}}}:}}}}}}}*333333333333333333333333333~33333333333~3333333<33333333333333<33333<3333333:}%[[                ",
-"             ,-44}}:}:}}:}:}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}}:}}}}:}}}}}}}}:}}}}}}}:}}:}}}}}}}:}:}}}}:}}:}}:$33<333<33333333333<3333333333<33333333333333333333333333333333333333333333:}|[[[               ",
-"             --4,}}}}}}}}}}}}}}:}}}:}}}}:}}}}:}}:}}}:}}}}}}}}}:}}:}}}:}}}}:}:}}}}}}:}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}:*$333333333<3333333333333333333333333<3333333333333<333333333333333333333*}3[[[               ",
-"             ,4%3}}}}:}}}:}}:}}}:}}}}:}}}}}}}}}}}:}}}:}}}:}:}}}}}}}}}}}}}}}}}}:}}}}}}}}}:}}:}}}}}:}}}}:}}:}}:}}:}}}}}*3333<333333<33333333333333333<33333333333333<333333<3333333333333333333$}:+[[               ",
-"             -4;:}}:}}}:}}}}}}}}}}:}}}}:}}:}:}}}}}}}}}}:}}}}}:}}}}:}}}:}}:}}}}}}:}:}}}:}}}}}}:}}}}}:}}}}}}}}}}}}}:}}}}}$$333333333333333333<33333333333333333333333333333333333<33333333<33333}}^[[               ",
-"            ,-4%}}}}}}}}}:}}:}}}}}}}:}}}}}}}}:}}}:}}}:}}}}:}}}}:}}}:}}}}}}}:}}}}}}}:}}}}}}:}}}}}:}}}}:}}:}}:}:}}}:}}}}}}}*3333333333333333333<3333333333333<33333333333333333333333<3333333333:}%[[               ",
-"            ,|4-}}}}}:}}}}}}}}:}:}}}}}:}}:}}}}}:}}}:}}}}}}}}:}}}}}}}}:}}}}}}}:}:}}}}}}}}:}}}:}}}}}:}}}}}}}}}}}}}}}}}:}}}}}:$$333333333<33333333333333333333333333333333333<3333333333333333333*}-[[[              ",
-"            --4_}}:}}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}:}}:}}}}}:}}:}}}}:}}:}}}}}}}}:}:}}}}}}}}}:}}}:}}}:}}:}}:}}}:}}}}:}}}}}*33333333333333333333333333333333333333333333333333333333333333333*}*+/[              ",
-"            -4%3}}}}:}}:}}}}}:}}}:}}}:}}:}}:}}}}:}}}:}}}}}}:}}}}}}}}:}}}}}}}:}}}:}}}}}}:}}:}}:}}}}}}}}}}}}}}}}}:}}}}:}}}}:}}}}$$33<333333<333333333<333<33333<3333333<3333333333333<33333333333:}+[[              ",
-"            -4%}}:}}}}}}}}:}}}:}}}}}}}}}}}}}}:}}}:}}}}}}:}}}}}:}}:}}}}:}}:}}}:}}}}}}:}}}}}}}}}}:}}}:}:}}}:}:}}}}}}}}}:}}}}}}}}}1$333333333333333<3333333333333333<3333333333<3333333333<3333333:}^[[              ",
-"           -|44}}}}:}}:}}}}}}}}}}}}:}}:}}:}}}}}}}}}}}}:}}}:}}}}}}}}}}}}}}}}}}}}}}:}}}}:}}:}}}}}}}:}}}}}:}}}}}}}}:}}}}}}}:}}:}}}}::$33333333333333333333333~33333333333333<333333333333333333333*}4[[              ",
-"           ,44|}}}}}}}}:}}:}}}:}:}}}}}}}}}}}:}:}}:}:}}}}}}}}}:}}:}}:}}:}}:}}}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}}:}:}}}:}}:}}}}}}}}:}}}}:$~3333333<333333$<3333333~3333333333333333333333333333333333*}_[[[             ",
-"           -4%_}:}}}:}}}}}}}:}}}}}:}}:}}:}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}:}}:}}}:}}:}}}:}:}}}:}}}:}}}}}}}}}}}}}:}}:}}:}}}}}}}:$33333333333333333<3333333<3333333333333<333333333<33333333}3[[[             ",
-"           --;$}}:}}}}}}}:}}}}}:}}}}}}}}}:}}}}}}:}}:}:}}}}}}}}}:}}:}}:}}:}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}}:}}:}}}}}}}}}}}}}:}}}}}*333333333<333333333333333333333333333333<3333333333<33333:}[[[             ",
-"           |4;}}}}}}}:}}}}}}}}}}}:}}:}}}}}}:}:}}}}}}}}}:}}}}}:}}}}}}}}}}}}:}}}}:}}}}}}:}}}}:}}}:}:}}:}:}}}:}:}}}}}}}}:}}}:}}}:}}}}:}}}:}$3333333333333333333333333~33<333333333333333333333333331}^[[             ",
-"          ,-44}}}::}}}}}:}}:}:}}}}}}}}:}}}}}}}}}:}}}:}}}:}:}}}}}}:}}:}}:}}}}}}}}:}}:}}}}:}}}:}}}}}}}}}}}}}}}:}}:}}:}}}:}}}:}}}:}}}:}}}}}}$3~333333333333333333333333333<333333333<33333333333333::;[[             ",
-"          -4%-}}:}}}:}}}}}}}}}}:}}:}}}}}:}:}}}:}}}:}}}}}}}}}}}}:}}}}}}}}}:}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}:}}:*333333~33333<33<333333333333333333333333333<33333333$}-[[[            ",
-"          --%,}}1:}}}}}:}}:}}}}}}}}:}}}}}}}:}}}}}}}}}:}}}}:}:}}}}}}:}}:}}}}}}:}}}}:}}}}}:}}:}}}}}:}:}}:}}}}}}:}}:}}:}}}:}}:}}:}}:}}}}}}}}}}}$33333333333333333<3333333333333<333333<33$333333333$}<+/[            ",
-"          |4%3}:1}}:}}}}}}}}:}:}}}}}}:}:}}}}}}}}:}}}}}}:}}}}}}:}}:}}}}}}:}}}}}}:}}}}}}:}}}}}}:}}}}}}}}}}}:}}:}}}}}}}}:}}}}}}}}}}}}:}}}}}:}}}}:$333333333333333333<33333333333333333333333333<3333}1+[[            ",
-"          -4%1}}*}}}}}:}}:}}}}}:}}}}}}}}}}}:}:}}}:}}:}}}}}}:}}}}}}}}}:}}}}:}}}}}}:}:}}}}}}:}}}:}}}}:}}:}}}}}}}}}}:}}}}}:}}}:}}:}}}}}:}}}}}}:}}}*<33333333333333333333333333333333333333<33333333$1:+/[            ",
-"          |4;}}11}:}}}}}}}}:}}}}}:}:}}}}:}}}}}}}}}}}}}:}}:}}}:}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}}}:}}}}}}}:}}}:}}:}}}}}:}}}}:}}}}}:}}}}}}:}:}}}}}}:$333333333333333333<33<3333333<$33333333333333331}^[[            ",
-"         -444}}11}}}}:}}:}}}}}}}}}}}}:}}}}}}}:}}}}}:}}}}}}}}}}:}:}}}}}:}}:}}}}:}}}}:}:}}}}:}:}}}}:}}}:}}}:}}}}}}}:}}}}:}}}}}:}}}}}:}:}}}}}}}}:}}}}$333333333333333333333333333333<333333333333333$}%/[            ",
-"         ,44-}}$:}}:}}}}}}:}}:}}:}}}}}}:}}:}}}}:}:}}}:}}}}}:}}}}}}:}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}:}}}}}}}:}}}:}}}}:}}}133333<33333333333333333333333333333333<3333333}-[[[           ",
-"         |4%_}}3}}}}}}}:}}}}}}}}}:}}:}}}}}}}}}}}}}}}}}:}:}}}}}}:}}}}}:}}:}}}}:}}}}:}}}:}}}}}:}:}}}}}}}:}}:}}}:}}:}}:}}}}}}:}}}}}:}}}}}}}}}}:}}}}:}}}:$333333333333333333<333<333333333333333333333}<[[[           ",
-"         -4%$}:3}:}}}:}}}:}}:}}}}}}}}}:}}:}}:}:}}}:}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}:}}}:}}}}}}:}}}:}}}}}}}}}}}}}}}}}:}}}}}}:}}}}}:}}}:}:}}}}:}}}}:}}}$$3333<33333~33333333333333<3333333333<33333::[[[           ",
-"         44;1}:3}}:}}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}:}}}}}:}:}}:}}}:}}:}}}:}}:}:}}:}}}}}}}}:}}}}}:}}}:}}:}}}:}}:}}:}}}:}}:}}}}}}}}}}:}}}}}:}}}}}}}}}}}}}:3333333333333333333333333333<33333333333331}+/[           ",
-"         44;}}**}}}}}}}:}}:}}}}}:}}}}:}}:}}:}}}:}}}}}:}:}}}}}}}}}}}}}}}:}}}}}}}}}}}:}}:}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}:}:}}}}}:}}}}}}:}}:}}:}}:}}:*33~33333333~3333333333333333333333333333*}^[[           ",
-"        ,444}}31}}:}:}}}}}}}}:}}}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}:}}}}}:}}}}:}}}:}}:}}}}}}}:}}:}}}}}}:}}}:}}}}:}}:}}:}}:}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}$3333333<33333333333333333333<3333333333*})[/           ",
-"        -444}}31}}}}}}:}}:}}}}}:}}}}:}}:}}}}}}:}}:}:}}}}:}}}}}}}:}:}}}}}}}}:}}}}}}:}}:}}}}}}}}:}:}}}:}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}:}}:}}}}:}}}:}}:}}}}}}}}:33<333333333~33333333<33333333333333333}4[[           ",
-"        |4%,}:31}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}}}:}}}}}}}:}}:}}}}}}:}}}}}}}}:}}}}}}}}}}}}}:}}:}}:}}:}}:}}:}}}}}:}:}}:}}}}}}:}}}}:}}}}}}:}:}:}}}:}$333333<33333<33333333333333333<333333}_[[[          ",
-"        |4%<}13:}:}}}:}}:}}}}}:}}:}}}:}}}}:}:}}:}}}}}}}:}}:}}}}:}}}:}}}}}}}}}:}}}:}}:}}}}}:}}:}}}:}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}:}}}}}:}}}}}}}}}}}}}}$33333333333333<$3333333333<333333333:<[[[          ",
-"        44%3}$3}}}}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}}}:}}:}:}}}}}}}}}}}:}}}}}}}:}}}:}}}:}}:}}:}}:}}:}}:}}}}}}}:}}:}}}}:}}}}}}}}}}}}}}}}}:}}:}}}}*333333333333333333333333333333<3333:1[/[          ",
-"        44):}33:}}}:}}:}}:}}}:}}}}}}}}}:}}}:}}}}}}}}}}:}}}}}}}:}}:}}}}}}}}}}}}}:}}:}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}:}}}:}}:}}:}}:}:}:}}}}}}}:}}}133333<33333333333<3333333333333333*}[[[          ",
-"        44;}}33}}}}}}}}}}}}}}}}:}}:}:}}}:}}}}:}}:}}:}}}}:}}:}}}}}}}}}}}:}}:}:}}}}}}}}:}}}}}}}}}}:}}}}}:}}:}}:}}:}}:}}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:333333333333333333333333333333333*}^[/          ",
-"        4%4}:3$}}:}}:}}:}}}:}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}:}}:}}:}:}}}}}}}}}:}}:}}}}}}:}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}:}}:}:}}:}}:}}}}:}}:}}}}}:}}:}}}$333333~33<333333<3333333333<333$}^[[          ",
-"       |444}:3$}}}:}}}}}:}}}}}:}}:}}:}}:}}}}:}}:}}:}}}}}:}}}}}}}}}}}}}}:}}}:}}}}}}}:}:}}}}}:}}:}}:}}}}:}}}:}}:}}}:}}:}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}$3333333333333333333<3333333333$}4[[          ",
-"       |4%,}13*}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}}:}}:}}}}:}}}:}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}:}}}}}}}:}}:}}}}:}}}:}}}:}}}:}}}}}}:}}:}}}}}:}}}:}}}}}*333333333333333333333333333333}4[[          ",
-"       |4%,}$3$:}}}}}}}}}}}}}:}}:}}:}}:}:}}:}}:}}:}:}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}:}}}}:}}}}}}:}}:}}:}}}}}}:}}}}}:}}:}}}}}}:}}}}}}}}:}}}}}}}:}}:}}}}}}}:}}}}:}}}}}:}}}*33333333333<3333$<33333333333}</[[         ",
-"       44;$}331}}:}:}}:}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}:}}:}}}}}}}}:}}}:}}}}}}}}:}}}}}:}}}}}}}}}}}}:}}}}}}:}}}}}}}}:}}}}}}}:}}}}}}:}}:}}}}}}}:}}}}}}}:}}}}:}}}}}:}}:3333<33333333333333333333333:_[[[         ",
-"       44;$}331}}}}}}}}}}}}}}:}}:}}:}}}:}}:}}:}}:}}:}:}}}}}}}}}:}}:}:}}}:}}}}}:}}:}}}:}}}}}:}}:}}}}:}}}}:}}:}}}}:}}:}}}}}:}}:}}}}:}:}}}}}}}}}}:}}}}:}}:}}}}}}}}}}:}}}}}::3333333333333333<3333333333::[[[         ",
-"       4%;}:331}}}}}:}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}}}:}}}:}}}}:}}}}}}}}}}}}}}}}}:}}}}}}}:}}}}}}:}}}:}}}}}}:}}}}}}:}}:}}:}}}}:}}}}}:$33<3333333333333333<333331:[[[         ",
-"       44)}:33*:}:}}}}:}}}}}}}}:}}:}}}}:}}:}}:}}:}}}:}}}}}}:}}}}}:}}}:}}}}}:}}:}}:}}}}}}:}}}}}}}}:}}}}}}:}}:}}:}}:}}:}}}}}}:}}}}}}}:}}}:}}}:}}:}}}}}:}}}}}}}}}}}}}}}}}:}}}}$333333<333333333333333331:2[/         ",
-"       4%4}1331}}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}}:}:}}}:}}}:}}}}}}}}}}:}:}}}}}}:}:}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}:}}}:}}}}}}}}}}}}}}}:}}}}:}}:}}:}}:}}:}}}}}:}}}33333333333333<333333333*}([[         ",
-"      |4%4}*331}:}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}:}}}}}}}}:}}}}}}}:}}}}}}}:}}}:}}:}}:}}:}}}}}}}}:}}}}}:}}}:}}:}}:}}}}}}}}}}}}}}}}}}}}}}:}}}}:}}$3333333333333333<33333$}^[[         ",
-"      |4%-}*331}}}:}}:}:}}:}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}:}:}}}}:}}}:}:}}:}:}}}}}}}}}:}}}}}}:}}}}}}:}}}}}}:}}}}}}}}}}}}:}:}}}}}}}:}}}}:}}}}}}}}}:}}:}}:}}:}}:}}:}}:}}}}}:}}}:}$3333<$<33333<333333333}%[[         ",
-"      |%%,}*331}}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}:}:}}}}}}}}}}}}:}}}:}}}}}}}}}}}}}:}:}:}}}}}:}}}:}}:}}}:}}}}}}}:}}:}}:}}}}}}}}:}}}}}}:}}}}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}$333$3333333$333333333}4[/         ",
-"      |%%,}$33*}:}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}:}}:}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}:}:}}}}}}:}}}}}}}}:}}:}}:}}:}}:}}:}}:}}}}}}:}}}}}}}$$$333333<$3333<33333},[/[        ",
-"      44;$:3331}}}}}}:}}}}}}}:}}:}}:}:}}:}}:}}}:}}}}}}}}:}:}}:}}:}:}:}}}}:}:}:}}}}}}}}}:}}:}}:}}}}:}}}}:}}:}}:}}:}}}}}:}:}:}}}}}}}}:}}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}:}:}:}}}$3333333333333333333}<[[[        ",
-"      4;;$}3331}}:}}}}}:}}}}}}}}}}}}}}}}}:}}}:}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}:}}:}}}}}}}:}}:}}}}}:}}}}}}}}}}}}:}}}}}}}}}}}}:}:}}}}:}}}}}}}:}}:}}:}}:}}:}}:}}:}}}}}:}}}}}}}}:}}$$33333333333333333:<[[[        ",
-"      44)*1333*}}}}}:}}}}:}}}}}:}}:}}:}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}:}:}}}}:}}}}}}}}}:}}}:}}}}}}}:}}}}}}:}}:}}:}}}}:}}}:}}}}:}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}*<3333<33333333333:1[/[        ",
-"      4%;}:333*}:}}}}}:}}}}:}:}}}}}}}}}:}}:}}}}:}}:}}:}}:}}}}}}:}:}}}}}}:}}}:}}}}:}}}}}:}}}}}:}}}}}}:}}}}}}}}}}}:}}}}:}}}:}}}}}:}}}}}:}}:}}}}:}}:}}:}}:}}:}}:}}:}}}}}:}}:}:}}}}}}:}}$33333333333<3333::+[/        ",
-"      %%)}:3331}}}}:}}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}:}}}}}:}:}}:}}:}}}}}}}}}}}}}}:}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}}$$33333333333333:}[[[        ",
-"      4%;}1333*}}:}}}:}}:}}}}}:}}}}}}}:}}:}}}}:}}:}}:}}:}}:}}}:}}}:}}}}:}}:}}}}}:}:}:}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}:}}}:}}:}}}}}}}}:}}:}}}}}:}}:}}}:}}:}}:}}:}}:}}}}:}}:}}}}}}}}:}}}}}*$$<$<3<3333333:}+[[        ",
-"      %%4}*3331}}}}}}}}}}:}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}}}:}:}}}}:}}}}:}}:}}:}}}}}}:}}}}}}}}:}:}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}:}}}:}}:}}}$$$3$$$33333331}^[/        ",
-"      %%4}1333*}}}:}}}:}}}}}}:}}:}}}}:}}:}}:}:}}:}}:}}:}}}}:}}}}}:}}:}}}}}}:}:}}}}}}:}:}:}}}}}}:}}}}:}}}}}}}}}}}}:}}}}}:}}}:}}}}}:}}:}}:}}}}:}}}}}}:}}:}}:}}:}}:}}:}}}}:}}}}}}}}}}}}}}:}$333333<33333*:^[[        ",
-"     |4%4}*3333:}}}:}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}:}}}}}}:}:}}}}}}}:}}}}}}}}}}:}}}:}}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}}}:}}}}}:}}:}}:}}:}}}:}:3333333333331}^[/        ",
-"     4%%-}$333*}}}}}}}}}}}}}:}}}}}}}:}}:}}:}}}:}}:}}:}}}}}:}}:}:}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}}:}}}}}}}}}}:}:}:}:}:}}:}:}}:}}}:}}:}}}}}}}}}}:}}:}}:}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}}}3333<$33333*}4[[        ",
-"     |%%,}$333*:}}:}:}:}}:}}}}:}}:}}}}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}:}}:}:}:}}:}}}:}:}}:}}}:}}}}:}}}}}}}}:}}:}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}}:}}:}}}}}}}}}}}}}}}}}:}:}}}}}}}}:}:}}:}}}}}:}:333$<3333$*:4[/        ",
-"     4%;,}$333$}}}}}}}}}}}}:}}}}}}}:}}:}}}}}}:}}:}}:}}}}}:}}:}}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}:}}:}}}}}}}}:}}}}}}}}}}}:}}:}}}}}}:}}}}}}}}}}}}:}}:}}:}}:}}:}}}}}}}}}:}:}}}}}}}}}:}:}}}::$$33333331}4[/        ",
-"     |%%,}$3333:}}}}}:}}:}}}}}}}:}}}}}}:}}}}}}}}}}}}}}:}}}}}}:}}}}:}}}:}}}}}}:}}}}}}:}}}:}}:}}}}}}}}}}}}:}}:}}}}}:}}:}:}:}}}}}}}}}:}}}}}:}}:}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}:333333331:4[[        ",
-"     4;;<}$3333}}:}:}}}}}}:}}:}}}}:}}}}}}:}:}}:}}:}}:}}}:}}}}}}}}}}}:}}}:}:}}}}:}}:}}}}}}}}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}:}}:}}:}}}}:}}}}}}}}}}:}}:}}:}}:}}:}}:}}}:}:}:}}}}}}:}}}}:}}:}}}}}}*$333333:}-[/        ",
-"     4%;$}$3333:}}}}}}}:}}}}}}}:}}}:}}}}}}}}}}}}}}}}}}}}}}:}}}:}}:}}}}}}}}}}}}}}}}}}:}}:}}:}}}}}}}}}:}}:}}:}}}}}:}}:}}}:}}}}}}}}}}:}}}:}}}:}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}:}}}}*$<3333*}_[[[       ",
-"     %%)3}33333:}}}}}:}}}:}}}}}}}}}}}:}:}}:}}:}}:}}}}:}}}}}}:}}}}}}:}}:}}}:}:}}}:}}}}}}}}}}}:}}:}}}}}}}}}}}}:}}}}}}}}}}}}:}:}}:}}}}}}}}}:}}}}}}:}}:}}:}}:}}:}}}}}}:}}}}}}}}:}}:}}:}}:}}:}}:}}}}133333:}<[[[       ",
-"     4;;$:333331:}:}}}}}}}:}:}}:}}}}}}}}}}}}}}}}}}:}}}:}}:}}}}}}:}}}}}}:}}}}}:}}}:}}:}}}:}}}}}}}}:}}}:}}:}}}}}}:}}}:}:}}}}}}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}$33331}<[/[       ",
-"     4;)$}3$333*}}}}}}}:}}}}}}}}}:}:}}:}}:}}:}}:}}}}}}}}}}}:}}:}}}:}}}}}}}:}}}}}}}}}}}:}}}}}:}}}:}}}}}}}}}:}:}}}}:}}}}}}}}:}}}:}}:}}}}:}}}}}}:}}:}}:}}:}}:}}:}}}}}}}}}}}:}}:}}:}}:}}:}}:}}}:}}}}}*333:}_[[[       ",
-"     %%;$:333$3$}}:}:}}}}}}:}}:}}}}}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}:}}:}}}}}}:}}:}:}}}}:}}}:}}}}:}:}}:}}}}}}}}}}}}}}}}:}}}:}}}}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}:}:}}:}}}:}}}}}}}}}:}}}}}:}}}}:}}}}:$*}}<[[/       ",
-"     %%^}:$3333*}}}}}}}}}}}}}}}}:}}}:}}:}}:}}:}}:}}}}:}}}}:}}}}}:}}}}}}}}:}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}:}:}:}}:}:}}}}}}}}}:}}}}}:}}}}}}}:}}:}}:}}:}}}:}}}:}}}}}}}}}}}}:}}}:}}}}}:}}}}}}}}}}:}}:}}}}3[[[       ",
-"     4%)}:$<3333}:}}}:}:}}:}}:}}}:}}}}}}}}}}}}}}}}}}}}}:}}}:}:}}}:}}}}}}}}}}}}}}:}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}}:}:}}:}}}}}}}}}}}}}:}}}}}}}}}}}}:}}}:}}}}}}:}:}}}}}}}:}}}}}:}}}}:}}}:}:}}}}}}}}}}:[/[       ",
-"     %;^}}333333}}}:}}}}}}}}}}}}}}}:}}:}}:}}:}}:}}:}}}}}}}}}}}}}}}:}:}:}}}}:}:}}}}:}}}}}}}}}}}:}}:}:}}}}}}}}}}}:}}}}:}}}}}}}}:}}:}:}}:}}}}}}:}}:}}}}:}}}}}}}:}}:}}}}}:}}:}}}}}:}}}}}}}}}:}}}}}:}:}}:}}}:+[[       ",
-"     %%)}}3333331}}}}}}:}}:}}}:}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}:}}}}}}}}}}:}}}}:}}}}:}}:}}}:}}}}}}}}}}}:}}:}:}}}}:}}}}}}}}:}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}:}:}}}}}}}}}}}}}}}}:}}:[[/       ",
-"     %%)}}$$33331}}}:}}}}}}}:}}}:}:}}:}}:}}:}}:}}:}}}}:}}}:}:}}}:}}}}}:}}}}}}}}}:}}}}}}}:}}}}:}}:}}}:}}}}}}}}:}}}}:}}:}}}}}:}}:}}}:}}}}}}}}:}}}:}}}}}:}}}}}}}:}}:}:}:}}}}}:}}}:}}}}}}:}}:}:}}}}}:}}}}}}:[[[       ",
-"     ;%^}:333333*:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}:}}}}}}}:}}}}}}}}:}}}}:}}}}}}}}}}}}}}}:}}}}}:}}}}}:}}:}}}}}}:}}}}:}}:}}}}:}}}}}:}}}}}:}:}}}}}}}}}}}:}}}:}}}}}}:}}}}}}}}}:}:}}}}}}:}}:[[/       ",
-"     %;^}}$33333*}}:}}:}}}}:}}:}}}}:}:}:}}:}}:}}}}}}}:}}:}}}}}}}}}}}}:}:}}}}}:}:}}}:}}}}}}}}:}}}:}:}}:}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}:}}}}}}}}}}}}}:}}}}}}:}:}}}}}}}}:}}:}}}}}:[[[       ",
-"     %;)}}*333$33}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}:}}:}}}}}}}:}}}}:}:}}}}}}:}}:}}}}}}}}}:}}:}}}}:}}}}}}}}}}}}:}:}}:}}:}}:}}:}}}}}}}}:}}}:}}}}}}}}}}}}:}}}}}:}}}}}}:}:}}:}}:}}}}}}}:}:}}}}}:}}}}}}}}}}}}:}}:[[/       ",
-"     %;)}}$33<$33:}}:}}}}}:}}:}}}}}}}}}}:}}:}}}}}}}}:}}}}}}}:}}}}}}:}}}}}}}}}:}}:}}}}}}}}}}:}}}}:}}}:}}}:}}}}}}}}}}}:}}}}}:}}:}:}}}:}}}:}}:}:}}:}}}}}:}}}}}}}}}}}}}}}}:}}}:}}:}}}}}}}}}}:}:}}}:}}}:}}}}:[[[       ",
-"     ;;^}:3$3$33$*}}}:}}}}}}}}}}}:}:}:}}}}}}}}:}}:}}}}:}}:}}}:}}}}}}}:}}}:}}}}}}}}}:}}:}}}}}:}}}}}}}}}}}}}}}}}:}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}:}:}:}}}}}:}}}}}}}}}}}}}}:}}:}}}}}}}}}}:}}}}}}}:[[/       ",
-"     ;%^}}133333$*}}}}}:}:}}:}}:}}}}}}}:}}:}}}}}}}}:}}}}}}}}}}:}:}}}}}}:}}}:}}:}}}:}}}}}:}}}}}:}}:}}:}}:}}:}:}}}}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}}:}}}}:}}}}}}}}}:}}}}}:}}:}}:}}}:}}}}}}:}}}}}:}}}}}}}}:}}:[[[       ",
-"     ;;)}}*3333333}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}:}}}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}:}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}:}}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}:}}}}}:}}}}}:}}}:}}:}:}}}}}:[[/       ",
-"     %)^}}13333333:}:}:}}}:}}:}}}:}}}}:}}:}}}}}}}}:}}:}}}}}}}}}}}:}}}:}}:}}:}}:}}}:}}}}}}}}:}}}}}:}}}:}}:}}}}:}}:}}}}}}}}:}}:}}:}}}:}}}}}}}}}}:}}:}}:}}}:}:}}}:}}}}:}}}:}}}}}}:}}}}}}:}}}}}}}:}}}}}:}}}:+[/       ",
-"     ;;^}:1333333$:}}}}:}}}}}}:}}}}}}}}}}}}}:}}:}}}}}}}:}}:}:}:}}}}}}}}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}}}}}}}:}}}}}}}:}}:}}}}}}}}}}:}}}}:}}:}}:}}}}}}}}}:}}}}}:}}}}}}}}:}}}:}}:}}}:}}:}}}}}}:}}}}}}:}}}:}}*[/[       ",
-"     ;)^1}:3333333*}}}}}}:}}}}}}:}}:}:}}:}}}}}}}}:}}}}}}}}}}}}}}}:}}}:}}:}:}:}}}}}}:}}}}:}}}}:}}}}}}:}}}:}}}:}}}:}}}}}}:}}:}}:}}}}}:}}}}}}}}}:}}:}}}}}}}}}}}}}}:}}}:}}}}}}}}}}}}}}}}:}:}}}}:}}}}}}}}}}}<+/[       ",
-"     ;;^3}:<3333333:}}}}}}}:}}}}}}}}}}}}}}}:}}:}}}}:}}:}}:}}}}}:}}}:}}}}}}}}}}}:}}}}}:}}}}}}}}}:}}}}}:}}}}}}}:}}}}}}:}}}}}}}}}}}:}}}}}:}}}:}}}}}}}:}}}:}:}}}:}}}:}}}}:}}}:}}:}}}}:}}}}}}}:}}}:}}:}}}:}}_[[/       ",
-"     ;))$}}33<3333$}:}:}}}}}}:}:}}:}}}:}}:}}}}}}:}}}}}}}}}}:}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}}:}}}}}:}}}}}}}:}}}}}:}}:}}}}:}}}:}}:}}}}}}}}}:}}}}:}}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}:}}}}<[[/       ",
-"     );^$:}333333$$1}}}:}}:}}}}}}}}:}}}}}}}}}:}}}}}}}:}}:}}}}:}}}:}}}}}}:}}}}:}}}}}}:}}}}}}}}:}}}}:}}}:}}}:}}}}}}}}:}}}}:}}}}}}}}:}}:}}}}}:}}}:}}:}:}}:}}}}}}}:}}:}:}}}}}}:}}}}:}}:}:}:}}:}}:}}:}}}}:}}-[/[       ",
-"     ;)^,}}333333333}}}}}}}}:}}}:}}}}:}}}}:}}}}:}}:}}}}}}}}}}}}:}}}:}}:}}}:}}}}}}:}}}}:}}:}}}}}:}}}}}}}}}}}}}:}}:}}}}}:}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:4[/        ",
-"     %^^-:}$3333333$:}:}}:}}}:}}}}}}}}}:}}}}}}}}}}}}:}}:}:}:}}}}}}}}}}}}}}}}}}:}}}:}}}}}}}:}:}}}}}:}}:}:}}:}}}}}}}}}}}}}}:}:}}}}}}:}}}}:}}}:}}:}}:}}}}}:}}}}:}}}:}}}}}}:}}:}}}}}:}}}}}:}}:}}:}}}:}}}:}}4[[        ",
-"     ;)^4}}*333333331}}}}}}}}}}}}}:}}}}}}:}}:}:}}}}}}}}}}}}}}:}}:}}:}}}:}}:}}}}}}:}}}}:}}}}}}}}}:}}}}}}}}}}}:}}:}}:}}}:}}}}}}:}}:}}}}:}}}:}}}}}}}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}}}}}:}}}}}}}:}}}:}}}:}}}:(//        ",
-"     ;^^%}}*33333$<3*}:}}:}}}:}:}}}:}}:}}}}}}}}:}:}}:}}:}}}}}}}}}}}}}:}}}}}}:}}}}}}:}}}:}}}}:}}}}}:}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}}}:}:}}:}}:}}:}:}}}}}}}:}}}:}}:}:}:}:}}}}}:}}}}}}}}}}}}}}}:^[[        ",
-"      ^^^}}:3333<3333}}}}}}:}}}}}}}}}}}}:}}:}}}}}}}}}}}}}:}}}:}}:}}}}}}:}}}}}}:}}}}}}}}}}:}}}}:}}}}}}:}}}:}}}:}:}}:}}:}}:}:}}:}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}:}}}:}}}:}}}}:}:+//        ",
-"      ^^^}}:3333$333$1}}:}}}}}}:}}:}}:}}}}}}}}}}}:}}}:}}}}:}}}}}}}}:}}}}:}}:}}}}:}}:}}:}}}}}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}:}}}}}:}:}}:}}}}}}}}}}}:}}:}:}}}}}}}}}}}}}}:}}}:}}}}:}}}}*[[[        ",
-"      )^2*}:33333$3333}}}}}}}:}}}}}}}}}:}}:}}}:}}}}:}}:}}}}}:}}:}:}}}:}}}}}}}}:}}}}}}}}}}:}:}}}:}}}}}:}}}}}}:}}:}}:}}:}}}:}}:}}}}}}}}:}}:}}}}}}:}}}}}}}}}}:}}}:}}}:}}}}}}}:}:}:}}:}:}:}}}}}}}}:}}}}}}}_[//        ",
-"      )^^<}}$333333333:}:}:}}}}}}:}}:}}}}}}:}}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}}:}}:}}:}}}}}:}}}}}}}}}:}:}}}}}}}}}}}}}:}}}}}}}}:}}:}}}}}}:}}}}}}}:}}}:}}}}:}}}:}}}}}}:}}}}}}}}}:}}}}}}}}:}}:}}}}}}:}:}-[/[        ",
-"      )2^-}}$333333333*}}}}}}}}:}}}}}}:}}}}}}:}}:}:}}}}}}:}}:}}}}}:}}:}}}}}:}}}}}}}}}}}}}}:}}}:}:}:}}}}}}}:}}:}}:}}:}}}}}:}}:}}}}}}}}:}}}}}:}}:}}}}:}}}:}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}:}}}}:%[/         ",
-"      ;2^%:}*333333333$:}}:}:}}}}}}:}}}}:}}}}}}}}}}}}:}}}}}}}}}:}}}}}}}}:}}}}:}}:}}:}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}:}}:}}}}:}}}:}}}}:}}}}}}}}}:}:}}}}:}}:}}}}:}:}}}:}}:}:}}:}}:}}}}}}}}}}:^//         ",
-"      )22^}}:33333333331}}}}}}}}}:}}}}}}}}:}:}}:}}}:}}}}}:}}:}}}}:}:}}:}}}}:}}}}}}}}}}}}:}}}}}}:}}:}:}}}}}:}:}}:}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}:}}1[[/         ",
-"       ^22:}}3333333333$}:}}:}:}}}}}:}}:}}}}}}}}:}}}}}:}:}}}}:}}}}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}:}}:}}:}}:}}}:}}}}}}}}}:}:}}}}:}}:}}}}}}}}}}:}}:}}}}:}}}:}}:}}}:}:}}}}}3[//         ",
-"       ^223}}33333333333:}}}}}}}}}:}}}}}}:}}}:}}}}}}}}}}}}}}}}}:}}}:}}}}:}}}:}}}}}}}}}:}}}}}}}}}:}}}}:}}}}}:}}}}}}:}}:}}:}}:}}}}}}}}}}}}}:}}}}:}}:}}}}}}}}:}}}}}}:}:}}}:}}}}}}}:}}}:}}}}}}}}}}}}}:}}:,[[/         ",
-"       (22-}:*3<33333333*:}}}:}:}}}}}}:}}}:}}}}}}:}:}}}}}}:}}}}}:}}}}:}}}:}}}}:}}}:}}}}}}}:}}:}}}:}}}}}}:}}}:}}:}}}}}:}}}}}}}}:}}:}}:}:}}}}}}}}}}}:}:}}:}}}}}:}}}}}}}:}}}}:}:}}}}}}}}}:}}}:}}}:}}}}}})[/          ",
-"       ^22;}}13333333333$:}:}}}}}}}:}}}}}}}}}}:}}}}}}:}:}}}:}}}}}}:}}}}}}}}}}}}}:}}}:}}:}}}}}}}}}}}:}}:}}}}}}}}}}}:}}}}}:}}:}}}}}}}}}}}}}}:}}:}:}}}}}}}}}}:}}}}:}}}:}}}}}}}}}}}}}:}}:}}}:}}}}}}}:}}::2//          ",
-"        222}}}333<3333333$}}}}:}:}}}}}:}}}}:}}}}}:}}}}}}}}}}}}:}}}}}}:}}}:}}:}}}}}}}}}}}}:}}}:}:}}}}}}}}}:}}:}}:}}}}}:}}}}}}}}}}:}}:}}}:}}}}}}}}}}}}}}}:}}}:}}}}}}}}}}}:}}}}}:}:}}}}}}}}}}:}}:}}}}}}3[[/          ",
-"        22+$}:333$<3333333:}}}}}}}}}:}}}:}}}}:}}}}:}}}}:}}:}:}}}:}}}}}}:}}}}}}}:}}:}}:}}}}}:}}}}}}}}:}}}}}}}}}}}}}:}}}}:}}:}}:}}}}}}}:}}}:}:}}}}:}:}:}}}}:}}}}}:}}:}:}}}:}:}}}}}}:}}}:}}}}}}}}}:}}}}-//[          ",
-"        222-}}*333$3333333$:}}}:}:}}}}}}}}:}}}}:}}}}:}}}:}}}}}}}}}}:}}}}}:}}:}}}}}}}}}}:}}}}}}}:}:}}}}:}}:}}:}}:}}}}}}}}}}}}}}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}:}}:}}:}}}:}}:;[/           ",
-"        (+2;}}:333<$33333331}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}:}:}}}}:}}}}}}}}}}:}}:}}}}}}:}}}:}}}}}:}}}}}}}}}}}}}:}}:}}:}}:}}}}}}}}}}:}:}}}}}}:}}}}}}:}}:}}}}}}:}}}:}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}12//           ",
-"         2++:}:33$$<33333333}}}}}:}:}}}}}:}:}:}}:}:}}:}}}}:}}}}}}:}}}}}:}}:}}}}:}}}}}:}}}}:}}}}}}}}}:}}}:}}:}}:}}}}}}}}}}}}}:}}:}}:}}}}}:}}}}}}}:}:}}}}}}}:}}}}}:}}}}}}:}}}}}}}:}}:}}}:}}:}}:}}}:}}<[//           ",
-"         22+<}}$3$33333333331}}:}}}}}:}}}}}}}}}}}}}}}}:}}}}}}}:}}}}}:}}}}}}}:}}}}}:}}}}}}}}}}:}:}}}}}}:}}}}}}}}}:}}:}}:}}}:}}}}}}}}}}}}}}}:}}:}}}}}}}:}}:}}}:}}}}}}}}}}}:}}:}}}}}}}}:}}}}}}}}}:}}}}%[/[           ",
-"         2++%}}*3333333333333:}}}}:}}}:}}}}}}:}}}}}:}}}}:}}:}}}}:}}}}:}}:}}}}}}:}}}:}}}:}}}}}}}}}:}}}}}}}:}}}:}}}}}}}}}:}}}:}}}:}}:}}}:}}}}}}}}}}}:}}}}}}}}}}}:}}:}:}:}}}}}}}}}:}:}}}}}}:}}:}}}}}}:2[/            ",
-"         (+22:}:33333333333333}}}}}}}}}}:}:}}}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}}:}}}:}:}}}:}}}:}}:}}}}:}}}}:}}:}}}}}}}}}:}}}}}}:}}}}:}}}:}}:}}}}:}}:}}}:}}}}}}}}}}}}:}}:}}}}}}}}}:}}}}}}}}:}}$[//            ",
-"          +++<}}33333<3333333$1:}}:}}}}}}}}}}:}}:}}:}:}}:}:}}}}}}:}:}}}:}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}}}:}}}}}}}:}}}}}}}}:}}}}}:}}}}}}}:}}}}}}:}}}}}}:}}:}:}}}}}}:}:}}}:}4[/[            ",
-"          (+2%}}*3333$<33333333:}}}}:}:}}:}}}}}}}}}}}}}}}}}}}:}:}}}}}:}}}:}}}}}}}}}}}:}}}}}}}}}:}}:}}:}}:}}:}}}}:}}:}}:}}}:}}}:}}}}}:}}:}}}:}:}}}}}}}:}}}}}}}:}}}}:}:}}}}}:}}}}}}}}}}}}}:}}}}}}}}:2//             ",
-"          2[+2:}:333333$<333333*}:}}}}}}}}}:}}}}:}}}}:}}}}:}}}}}}}}}}}}}}}}}:}}:}}:}}}}:}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}:}}}}}}}}}}}}:}}}:}}}:}}}:}}}}:}}}}}}}:}}}}}}}}:}}:}:}}}}}}:}}}}3[//             ",
-"           +++_}}333333$$33333331}}:}}}:}}}}}}:}}}:}}}:}}}}}}:}}}:}}}:}}}:}}}}}}}}}}}:}}}}}:}:}}}:}}:}:}}:}}}}}}:}}:}}:}}}}}}}:}}}}:}:}}}:}}}}}}}}}}}}}}:}}}}:}}}}}:}}}}}}}:}:}}}}}}}}}}}}:}}}:}};[/[             ",
-"           2++;}}*3333$<3$<333333:}}:}}}:}}:}}}}}}}}}}}}:}:}}}}}}:}}}:}}}:}}}:}}:}}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}}}:}}:}}}:}}}}}}}}}}:}}:}}:}}}:}}}}}}}}}}}:}}}}:}}:}}}}}}:}}:}}:}:}}}}}}}}:+[/              ",
-"           (+++*}:$333333$33333333}}}}}}}}}}}}}:}}:}}}}}}}}}:}:}}}}}}}}}}}}:}}}}}}}}}}:}:}}}}}}}:}}:}}}:}}:}}}}:}}:}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}}:}}}}:}}:}}:}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}:}}},[//              ",
-"            +++|}}*<333333333333333}:}}}:}}:}:}}}}}}}:}}}:}}}}}}}}:}}}:}}}}}}}:}}}:}}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}:}}}}}:}}}:}}}}:}}}}:}}:}}}:}}}}:}}}}}}:}}}}}:}}}}:}}}}}}:}}:}}:}}}}:}:}}}}}:)[//              ",
-"            ([+2}}:$3<$3333<3333333*}}:}}}}}}}}:}}:}}}}:}}}}}}:}}}}}:}}}:}}:}}}}:}}}:}}}}}}}}}:}}}}}}}}:}}:}}:}}}:}}}}}:}}}:}}}}}}}}}:}}}}}}:}}}}}}}}}:}}}}}}:}}}}}}}}:}}}:}}}}}}}}}:}}}}}}:}}}3[/[               ",
-"             +[+_}}$$$<33333333333331}}}}}}}}}}}}}}:}}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}:}:}}}:}}}}}:}}:}}}}}}}}}:}}}}}:}}}}}}}}}}}:}}}}}}}:}}}}}}:}}:}}}}}}}:}}}}:}}:}}}}}}}}}}}:}}:}}}}}}:}}}}}:%[//               ",
-"             2++(}}*$$3333333333333331}:}:}:}}}:}}}}}:}}}}}}:}}}}}}:}}:}}:}}:}:}}}:}}}}}}}}}}}:}}}}}}}:}}}:}}}}}}}}}}}}}:}}:}:}}}}:}}}:}}}:}}:}}}:}}}:}}:}}}}}}}}}}:}}}:}}:}:}}}}}}:}}:}}}:}}}1[[/                ",
-"             ++[+$}}3333333333<3333333:}}}}}:}}}}:}}}}}:}:}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}:}}:}}}:}}:}}}}:}}}}}}}:}}:}}:}}}}}}}}:}}}}:}}}}}}}}}}:}}}}}}}}}}}}}:}}:}}}}:}}}}}}}}}}}:}}}}}}}}}}}}:-[//                ",
-"              2[+%:}*3333333333333333331}}}}}}}}}}}:}}}}}}}:}}:}}}}:}}:}}:}}}}}}}}:}}:}}}}}}}:}}}:}}}}}}}:}}:}}}}}}}:}}}:}}}}}}}:}}}}}:}:}}}}}}}}}:}}:}}}:}}}}}}}:}}}}}:}}:}}}:}}}:}}}}:}:}}}1+[//                ",
-"              2+[+*}}3333333333333333333*}}}}:}:}}}}}}}}:}}}}}}}:}}}}}}}}}:}}:}}}}}}}}:}}:}}}}}}}}}:}}:}}}}}}:}}:}}}}:}}}}:}}:}}}}}}}}}}}}}:}}}:}}}}}}}}}:}}}:}}}}}}:}}}}}}}}}}}}}}}:}}}}}:}:,[/[                 ",
-"               +[+%:}*3333<333333<33333331}}}}}}}:}}:}}}}}:}}}}}}}}:}}:}}}}}}}}:}}}:}}}}}}}}}:}}}}}}}}}}}:}}}}}}}}:}}}}:}}}}}}}}:}:}:}}}:}}}}:}}}}:}}:}}}}}:}}}:}}}}}}}:}:}}:}}:}:}}}}}}}}}}:+[//                 ",
-"               2+++*}:33333333333333333333*}}:}}}}}}}}:}}}}}:}}:}}}}}}}:}}}}:}}}}}}}}:}:}}:}}}:}:}}:}}:}}}}:}}}:}}}}}}}}}}:}}:}}}}}}}}}}}:}}}}}:}}}:}}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}:}:}}}}}-[//                  ",
-"                +[+;}}*333333333333333333331}}}:}:}}:}}}:}}}}}}}}}:}}}}}}:}}}}:}:}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}:}}:}}}}}}}}}}}}}}:}:}}}}}}}}}}}}}}}:}}}}}:}}:}}}:}:}}}}:}}:}}}}:}}}}}:}::+[//                  ",
-"                ([++*}:333<33333333333333333$}}}}}}}}}}}}}}:}}:}}}}:}:}}}}:}}}}}}}}}}}:}}:}}:}}}:}}:}}:}}:}}}}}:}}}}}}}:}}:}}:}:}:}}}}}}}}:}}:}}}:}}}}}:}}:}}}}}}}}}}}}:}}}}}}}:}}}}}:}}}}}-[//                   ",
-"                 +[+%}}*3333333333<33333333333}}}:}}}:}:}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}}}}}}}}}:}}}}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}:}}}:}}}:}}}}}}}:}}:}}}}}}}}}:}}}}}}}}}}}}}:}}:+[//                   ",
-"                 ([+[3:}33333<333333333333333331}}:}}}}}:}}:}}:}}}}}}}}}}}:}}}}}:}}}}}}:}}}}}}}}}:}}:}}:}}}}:}}:}}}}:}}:}}:}}}}}}}:}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}}:}:}:}}}}:}}:}}:}}:}}}}:4[//                    ",
-"                  +[+)}::333333333333<33333333331}}}}}}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}}:}}}:}:}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}:}:}:}}}}:}}}}:}}:}}}:}}}:}}}}:}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}*+//[                    ",
-"                  ++[+,}}$3333<333333333333333333*::}:}}}:}}:}}:}}}}}}:}}:}}}}}:}}:}}}}}}}}}}}}}}}}:}}:}}}}}}}}:}:}}:}}:}:}}}}}}}}:}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}:}}}}:}}:}}:}}:}:}}:%[/[                     ",
-"                   +[+21}:$333333333333<3333333333$1}}}}}}}}}}}}}:}}}}}}}}}:}}}}}:}}}:}}}:}}}:}}:}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}}}}}:}:}}}:}}}}:}}}:}:}:}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}}<[//                      ",
-"                    +[[|}}*33333<333333333<333333333$:}:}}:}}:}}}}:}:}}:}}}}}:}}}}}}}:}}}}:}}}}}}:}}}:}}}}}:}}:}}}}:}}:}}:}}}:}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}:}}:}}:}}:}}:}}}}:}:([/[                      ",
-"                    2[[+3}}$333333333333333333333333331}}}}}}}}}:}}}}}}}}:}}:}}}}}:}}}}:}}}}:}}:}}}:}}}}:}}}}}}}:}}}}}}}}}}}}}}}}:}:}}}}}}}:}}:}}}}:}}}}:}}:}}}}}:}}}}}}}}}}}}}}}}:}}}}-[//                       ",
-"                     +[+(:}13333333333333333333333333333*:}}:}}}}}}}}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}}}:}}}}}}:}:}}}}}:}}}}}}}}:}}}:}}}}}}}:}}}}:}}}}}}:}}:}}}:}}:}}:}}:}}:}}}}:}$+///                       ",
-"                     2[[+-}}*33333333333333333<3333333333*:}}}}:}}:}:}}}}}:}}:}}}}:}}:}}}}}:}}}}:}}}}}:}}:}}}}:}}:}}}}}:}:}}}:}:}}}}}}}}}}:}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:^[/[                        ",
-"                      +[[+3}}$333<3333333333333333333333333$:}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}:}}}}:}}}}}:}:}}}}:}:}}}}:}}:}}:}}:}}:}}:}}}}}:,[//                         ",
-"                       +[+(}}}3333333333<33333333333333333333$1}:}}}}:}}}}}}}:}:}:}}}}:}}}}:}}}}:}}:}}:}}:}}:}}:}}:}}}:}}}:}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}*+[//                         ",
-"                       ([[[|:}133333<33333333333<33333333333333$1}:}}}}}:}:}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}}:}}}}}}}}}}}}:}}:}:}}}:}:}}}}}:}}:}}:}}:}}:}}:}}:}:}::^[//                          ",
-"                        +[[[3:}*333333333<333333333333333333333333*:}}:}}}}}}}}}}:}}}}:}:}}}}}}:}}:}}:}}:}}:}}:}}}}}}:}}:}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}}4[//                           ",
-"                         +[[(:}}$33333333333333333<33<3333333333$3$3$1:}}}:}:}:}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}:}}:}:}}}}}:}}:}}}:}}}:}:}}}}}:}}}}}:}}}}}}}:}}:}}:}}}:3+//[                           ",
-"                         ++[[)}:}333333333333<333333333333333333<$33333$*}}}}}}}}}:}:}}}}}}}}}:}}:}}:}}:}}:}}}}}}}}}}}}}}:}}}}}}}}}:}}}}}}}:}}}:}}}}}}}}}}}:}}}}:}}}:}}}}}}}}}}:}$2///                            ",
-"                          ([[[|}:}<333333333333333333333<3333333333333$$33$*::}:}}}}}:}}:}}:}}}}}}}}}}}}}}}}:}}:}:}}:}:}}}}}:}}}:}}}}}}:}}}}}}}}}}}}:}:}}:}}}}}}}:}}}}}}}:}}:}}}:;//[                             ",
-"                           +[+[<}}:333333333333333333333333333333333333333333$$*1}}}}}}}}}}}}:}}:}}:}}:}}}}}}}}}}}}}}}}}:}}}}}:}}}}}:}}}}:}}}:}}:}}}}}}}}}}:}:}}}}}:}}:}}}}}}}}}|[///                             ",
-"                            +[[+3}}1333333333333333333333333333333333333333333333$$*::}:}}:}}}}}}}}}}}}}:}}:}}:}}:}:}}}}}}}:}}}}}:}}}:}}}}}}}}}}}:}:}}}:}}}}}}}}:}}}}}}}}:}}}:}_[///                              ",
-"                             [+[(::}*3333333333333333333333333333333333333333333333$33$$**:}}:}}:}}:}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}:}}}}:}}:}}}}}}}:}}}}}:}}:}}}}:}}:}}}}}:}}$+[//                               ",
-"                             ([[[(}}}*33333333333333333333<3333<3333333333333333333333$$$3333$$***:*:}:}}:}}:}}:}}:}}}}}}}}:}}:}}:}}}}:}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}32///                                ",
-"                              +[[+;:}}*33<333<3333<333333333333333<333333333333333333333$3333333$$$$33333$**::}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}}}:}}}:}}}}}}:}}:}:}}:}}:}}}}}:^[/[                                 ",
-"                               +[[[;}}}13333333333333<333333333333333333333333~333333333333333333333~333$$$$$$$$$:}1}}}}}}}}:}}:}}:}}:}}}}:}:}:}}:}}}}}}:}}}}}}}}}}}}}}}}}:1;////                                 ",
-"                                +[[+|}}}13333333333333333333<33333333<33333333333333333333333333333333333333333$$$$$*}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}:}}}}}:}}:}}}:}:%[/[/                                  ",
-"                                 +[[[,:}}:333<3333333333<33333333333333333333333~333~33333~333333333333333333333$$3$$$*:}:}}:}}:}}:}}:}}}}}}}}:}}}}:}}:}}}}}:}:}}}}}}:}}}:-[///                                   ",
-"                                  [[[[,}:}:$3333<33333333333333<33~3333333<33<333333333333333~33333333333333333333333333*:}:}}}}}}}}}}}}}}:}}}}}:}}}}}}}:}}}}}}}:}}}}}}}:|[//[                                    ",
-"                                   +[[[,}}:}$333333<333333333333333333<3333333333333<33333333333333<33~333~3333333333333$$$*}}:}:}}:}}:}}}}}:}}}}:}}}}}}}}}}}:}}}:}}}:}:-[/[/                                     ",
-"                                    [[[+|}}}}*$3333333~333333333333333333333333333333333<33333333333333333333333333333333$<$*}}}}}}}}}}}:}}}}}:}}}}:}:}}:}:}}}}}}}}:}}:-[[//                                      ",
-"                                     [[[+|:}}}*33333333333~33333333333333333333<3333333333333333333333<3333<333333333333$$$$$$*}}:}}:}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}}:-[///                                       ",
-"                                      [[[[%}}}}:$3333333<3333333<33333333333333333333333333<333333333333333333<3333333333<3$3$3$}}}}}}:}}}}}:}}:}}:}}:}}:}}:}}}}:}}::4[///                                        ",
-"                                       +[[[;:}:}}*33<3333333333333333~3333333<3333333333333333333333333333333333333333333$$$333$3}:}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}:}:;[///                                         ",
-"                                        [[/[(*}}}::33333333333333333333333333333333333<3333333<333333333333333333~333333333<$$333$}}}:}:}}}}:}}:}}}:}:}}:}}}}}}}}:1)[/[/                                          ",
-"                                         +[[[(3}}}}}*3333333333333333333333333333<33333333333333333333333333~3333333<33333$<$<$333$:}}}}}:}}}}}}}:}}}}}}}}:}}}:}}*2[///                                           ",
-"                                          [[[[+<:}:}}:33333<3333<333333<33333333333333333333333333<33333333333<33333333333333333333$}}}}}}}:}:}}}}}}}}:}}}}}:}}:<+[//[                                            ",
-"                                           +[[[[|:}}}:}$33333333333333333333333333333333<333~333333333333<3333333<3333333333333333331:}:}}}}}}:}}}}:}}}}}:}}}}:-+////                                             ",
-"                                            +/[/[)*}}}}}:$33333333<333333~3333333~3333333333333<33333<3333333333333333333333333333333}}}}:}}}}}}:}}}}}:}}}}:}1%[/[/                                               ",
-"                                              [[[[+<:}}}}}13333333333333<333<333333~333333333333333333333333333333333333<333333333333*:}}}}:}}}}}}}}:}}}}:}}3([///                                                ",
-"                                               [[[[[|:}}}}}:*3333333~33333333333333<3333<3333333333333333333333333<33333333333<3333333:}}}}}}:}}:}}}}}:}}}1,+//[/                                                 ",
-"                                                [/[[[(3:}}}}}}*3333333333333333333333333333<333333~3333333333333333333333333333333333$1}}:}}}}}}}}:}}}}}:*;[////                                                  ",
-"                                                  [//[[|:}}}:}}}$333333333333<333333333333333~3333333<33333333333333333333<33333333333$}}}:}:}:}}}}:}:}:_+[/[/                                                    ",
-"                                                   +/[[/(~:}}}}}}}*$3333333333333333<3333333333<33333333<333<333333<3333333333<3333333$}}}}}}}}}}}}}:}*%[[///                                                     ",
-"                                                     [/[/[;*}}:}:}}}:$$333333333333333333333333333333333333333333333333333333333333333$}}:}}}}}:}}}}:,[[//[                                                       ",
-"                                                      [[/[[+=:}}}}}}}}:*3333333~333333333<3333333<333333333333333333333333333333333333$}}}}}:}}}}::3([[///                                                        ",
-"                                                        [[/[[(|:}}}}:}}}::$$333<3333~33333333333333333333~333<333333<333333333333333331}}:}}}}:}}*)[[///                                                          ",
-"                                                         [[//[[(|::}}}}}}}}::$3333333~33333<3333333333<333333333333333<333333333<33333}:}}}}}}:*%[[////                                                           ",
-"                                                           [/[/[[(|}::}}}:}}}}}1$33333333333333333~3333333333333333333333<33333333333*}}}:}:}$4[[////                                                             ",
-"                                                             [/[/[/(|*:}}}}}}}}}}}:*$333333333~333333333<33333<33333333333333333333$*}}}}}}3;+/[///                                                               ",
-"                                                               [/[/[[[=3}}}:}}:}}:}}}:1$$333333333333333333333333333333333333333333*}}:}1<)[[///[                                                                 ",
-"                                                                 [/[/[/[(|::}}}}}}}}}}}}}:1*$33333<333333~3333333333333333<333<33$:}:}$|2[[///[                                                                   ",
-"                                                                   [//[/[[+;<:}}}}}}}}:}}}}}}::**$$33333333<3333<33333333333333*:}}:,)+[/////                                                                     ",
-"                                                                      /[////[[)<1:}:}}}}}}:}}}}}}}}::*$$33333~3333333333333$*:}:1,;[//////[                                                                       ",
-"                                                                        [[////[/[)|3:}:}}}}}}}}}:}}}}}}}}}}:::**1*$$**:*:::::$|)[[//[//[                                                                          ",
-"                                                                           /[////[/[[(=<*:::}:}}}:}}}}}}:}}}}}}}}}}}}}:::<|)+[[/////[/                                                                            ",
-"                                                                              [/////[[/[/((=|<31:::}:}}}}}:}:}:::1$<|=((/[////////[                                                                               ",
-"                                                                                  [////////[//[/[((((%|;=%|;=(((([[[[/[///[///[                                                                                   ",
-"                                                                                      [////////[//[/[//[/////[/////////////                                                                                       ",
-"                                                                                            [[////////////[////////[/                                                                                             ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  "};
diff --git a/perl-install/pixmaps/mouse_3b+_mini.xpm b/perl-install/pixmaps/mouse_3b+_mini.xpm
deleted file mode 100644
index c4b4960b3..000000000
--- a/perl-install/pixmaps/mouse_3b+_mini.xpm
+++ /dev/null
@@ -1,211 +0,0 @@
-/* XPM */
-static char * mouse_3b+_mini_xpm[] = {
-"105 175 33 1",
-" 	c None",
-".	c #0C1530",
-"+	c #FE9A02",
-"@	c #212F55",
-"#	c #7C6535",
-"$	c #E8A518",
-"%	c #B68725",
-"&	c #DAA22A",
-"*	c #95742E",
-"=	c #E6A929",
-"-	c #757C98",
-";	c #F7B01E",
-">	c #B2924F",
-",	c #FDA106",
-"'	c #61543C",
-")	c #ACAECB",
-"!	c #7E84A0",
-"~	c #AFB2CD",
-"{	c #878DAC",
-"]	c #13234A",
-"^	c #E2A62E",
-"/	c #8D6F32",
-"(	c #5B6485",
-"_	c #3A4461",
-":	c #BABEDA",
-"<	c #9A9ABD",
-"[	c #FEB212",
-"}	c #D6A236",
-"|	c #465173",
-"1	c #A6A8C6",
-"2	c #9EA0C0",
-"3	c #697293",
-"4	c #313C5E",
-"                                                (3<|.                                                    ",
-"                                                ((<|.                                                    ",
-"                                                (-<4.                                                    ",
-"                                                (-<4.                                                    ",
-"                                                (3<@.                                                    ",
-"                                                (!<].                                                    ",
-"                                               (|!<..                                                    ",
-"                                               (|!<].                                                    ",
-"                                               ((!{].                                                    ",
-"                                               (|<<..                                                    ",
-"                                               ||{<].                                                    ",
-"                                               (_!<..                                                    ",
-"                                               (|!<].                                                    ",
-"                                               (|!<].                                                    ",
-"                                                _!<@.                                                    ",
-"                                                |3<@.                                                    ",
-"                                                33<4]                                                    ",
-"                                               2--<-@4                                                   ",
-"                                              {!!<<<!_]                                                  ",
-"                                              (|<<<<<!]]                                                 ",
-"                                              |_2<<<<<@.                                                 ",
-"                                              |_{<<<<<_.                                                 ",
-"                                              ||{<<<<<|]                                                 ",
-"                                              |_!<<<<<3.                                                 ",
-"                                              -(-<<<<<!].                                                ",
-"                                             )13|_444__]_-!                                              ",
-"                                          ~)1{!((33-333((33---                                           ",
-"                                       ~~1{{<~::~)11)111~:)<-(33                                         ",
-"                                     ~~2{/|:12<<<<<<<<<<<<<:{]||((                                       ",
-"                                    ~1{>;=@{2<<<<<<<<<<<<<<<|4[&'|||                                     ",
-"                                  ~){>;[[[|3)<<<<<<<<<<<<<<<]#[[[}||||                                   ",
-"                                 ~1!^[;,;[#_:<<<<<<{<<<{<<<{]%[[[[;*4__                                  ",
-"                                ~<>;,+++[[%]:1<<<<<<<<<<<<<3]&[[[[[[&___                                 ",
-"                               ){>,,++++[[>]1~<<<<((((<<<<2(@[[[[[[[[='44                                ",
-"                              1!&,+++++[[[$]<:2<<@....]{<<1|4[[[[[[[[[;#@4@                              ",
-"                             1!^,+++++[[[[[@!:)<<@....]{<<)_'[[[[[[[[[;[#@@@                             ",
-"                            1!$++++++[[[[[[4-::<<].....{<<~@'[[[[[[[[[[[[#@@                             ",
-"                           1!&++++++[[[[[[[_3::1<4....4{<<:]/[[[[[[[[[[[[[#@@                            ",
-"                          1!&,+++++,[[[[[[['(:::<].....{<<:]/[[[[[[[[[[[[[;'@]                           ",
-"                         1!}++++++;[[[[[[[['|:~:14....4{<<1]%[[[[[[[[[[[[[[[_@]                          ",
-"                        1<>$+++++,[[[[[[[[[#|:::~@....]{<<1]%[[[[[[[[[[[[[[[$4]]                         ",
-"                       1<!,+++++[[[[[[[[[[;/|::::4]..]4{<21]>[[[[[[[[[[[[[[[[>]]]                        ",
-"                       2-;+++++,[[[[[[[[[[[/_::::......{<<{]}[[[[[[[[[[[[[[[[[*]]                        ",
-"                      2!}+++++[[[[[[[[[[[[;/_:~::_....4{<2<]%[[[[[[[[[[[[[[[[[;']]                       ",
-"                     1<*;++++,[[[[[[[[[[[[[%@::::].....{<<{]$[[[[[[[[[[[[[[[[[[&@]]                      ",
-"                     <-;++++;[[[[[[[[[[[[[[*4:::~@....@{<2<]=[[[[[[[[[[[[[[[[,[[*]]                      ",
-"                    2!>,+++,[[[[[[[[[[[[[[[%@::::......{<<<]$[[[[[[[[[[[[[[[[[,[[_]]                     ",
-"                   <<![+++,[[[[[[[[[[[[[[[[*4:~::_...]4{<<!]=[[[[[[[[[[[[[[[[[[,[&]]]                    ",
-"                   <-$,++,[[[[[[[[[[[[[[[[[%@::::].....{<<!]&[[[[[[[[[[[[[[[[[[,,[#]]                    ",
-"                  <{%;++,[[[[[[[[[[[[[[[[[;*4:::~_....4{<<!]=[[[[[[[[[[[[[[[[[[,+[$@]]                   ",
-"                  <3=,+,[[[[[[[[[[[[[[[[[[[%@::~:......!<<!]=[[[[[[[[[[[[[[[[[[[+,[*]]                   ",
-"                 <!>;+,[[[[[[[[[[[[[[[[[[[[*@::::_...]_{<1{]=[[[[[[[[[[[[[[[[[[[,+,;@]]                  ",
-"                 <3[,+[[[[[[[[[[[[[[[[[[[[[*_::::......21:{]=[[[[[[[[[[[[[[[[[[[,++[*]]                  ",
-"                <!>;+[[[[[[[[[[[[[[[[[[[[[[/_:~::_]..]_)::<]}[[[[[[[[[[[[[[[[[[[;+++[4]]                 ",
-"                <3[,,[[[[[[[[[[[[[[[[[[[[[[/_::::......1::2]>[[[[[[[[[[[[[[[[[[[[+++,*]]                 ",
-"               {!>[[[[[[[[[[[[[[[[[[[[[[[[[(|:~::|]..]|)::1]}[[[[[[[[[[[[[[[[[[[,++++[@]]                ",
-"               {-;[[[[[[[[[[[[[[[[[[[[[[[[['(::::......1::~]*[[[[[[[[[[[[[[[[[[[;++++,/]]                ",
-"              {{*[[[[[[[[[[[[[[[[[[[[[[[[[[_(::~:_]..]_)~::]%[[[[[[[[[[[[[[[[[[[,+++++,]]]               ",
-"              {3&[[[[[[[[[[[[[[[[[[[[[[[[[[_3::::......1:::@/[[[[[[[[[[[[[[[[[[[++++++;']]               ",
-"              {|%[[[[[[[[[[[[[[[[[[[[[[[[[[@-::~:4]..]_):::4#[[[[[[[[[[[[[[[[[[;++++++,_]]               ",
-"             {-_/[[[[[[[[[[[[[[[[[[[[[[[[[[]{::::......2:::||[[[[[[[[[[[[[[[[[[,++++++,@]]]              ",
-"             {33@[[[[[[[[[[[[[[[[[[[[[[[[[&]<:::~_]..]_1:::(|[[[[[[[[[[[[[[[[[,+++++++*]4(.              ",
-"             !{~@#[[[[[[[[[[[[[[[[[[[[[[[[%]~::::......1:::3][[[[[[[[[[[[[[[[[+++++++$@]{<]]             ",
-"            !3):{@>[[[[[[[[[[[[[[[[[[[[[[[*@:~:::(]..]3):~:{@[[[[[[[[[[[[[[[[+++++++,_]|::4]             ",
-"            !-::~3]*[[[[[[[[[[[[[[[[[[[[[[#_:::~::-(33:::::2]>[[[[[[[[[[[[[[++++++,$_](~2~3.             ",
-"           {-<~:::!@(;[[[[[[[[[[[[[[[[[[[[||::::::::~:::::::]>[[[[[[[[[[[[+++++++;%@]()2<)1]]            ",
-"           !3~:::::24@/;[[[[[[[[[[[[[[[[[[@-:~::~:::::~:~:~:4'[[[[[[[[[[[+++++,[%_]4{1<<<2:_]            ",
-"           !-:::::~::!4@(}[[[[[[[[[[[[[[[$]{::::::::::::::::(|[[[[[[[[,++,,,[$/4]@312<<<<<~-]            ",
-"          {-<~:~::::~::{|@@#>=[[[[[[[[[[[%]~:::::~::~:~:::::-][[[[[[[,[[;;%/_]]|!~1<<<<<<<11]]           ",
-"          !(~::::::::::::~!|@@4(*>=[[[[[['|:~:~:::~:::::::~:1]}[[[[[$%*#4@]]|-1~2<<<<{<<<<2:4]           ",
-"          --:::::~:::~:::::::2-(4@]@4|'#/@({<111)::::::~2)1<{@_/#'_@]]]4'-2~:22<<<<<<<<<<<<~3.           ",
-"         !-{::~::~:::~::~:::::::::){!((|_@@]]]]]]]]]]]]]]]]]]]@4||(-{1~::~22<<<<<<<<<<<<<<<11]]          ",
-"         -3~:::::::::::::::~::~::~~~)~~::::~:1112{<{<{<{)11~:::~::::~)12<<<<<<<<<<<{<<<{<<<2:@.          ",
-"         !3:::::::~::~::~:::::::::::~1<<<2111)~~~:~::::::~:~~~~111<<2<<<<<<<<<<<<<<<<<<<<<<<:(]          ",
-"         -{:~:~::~:::::::::~::~::::::::12<<<<<<<2<<<<<2<<<<<<<<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<1{]          ",
-"        -32::::::::~:::~:::::::~:::::::::~2<<<<2{<<<<2{2{<<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<<{<<1~]]         ",
-"        -(:::::~:::::~::::~::::::~:~:~:::::~1<<<<<<<<{2<2<<<<<<<<<<<{<<<<<<<<<<<<<<{<<{<<<<<<~_.         ",
-"        --::~::~::::::~:::::~::::::::::~:::::~1<2{<<2<2{<<<<<<<{<<<<<<{<<<<<<<<<<<<<<<<<<<<<<~3]         ",
-"       !3{:::::::~:::::::~::::~::~::::::::::::::122<<<<<<<<<<<<<<<<<<<<<<<<<<<<<{<<<<<<<<<<<21{].        ",
-"       -32::::::::~::~:::::~::::::::~::::~:~::::::)<<<<<<<<<{<<<<<<<<<<<<<<<{<<<<<<<<<<<{<<<<2:]]        ",
-"       -3:::~::~::::::::~:::::~::::::~:~:::::~::~::~)<<<{<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<<<<<<<~_.        ",
-"       -3::::::::::~::::~::~::::~:~::::::::~::::::::::)<<<<<<<<<<<<<{<<{<<<<<<<<<<<{<<<<<<<<<<~(]        ",
-"       3{:~:::~::~:::~:::::::::::::~::~::::::~::::::::::1<<<<<<<<<<<<<<<<<<<{<<<<<<<<<{<<<{<<<1{]        ",
-"      -32:::~::::::::::::~:::~::~::::::::~:::::~:~:~::::::1<<<<<{<<<<<<<{<<<<<<<<<<<<<<<<<<<<<2~].       ",
-"      -(::::::~::~:::~::::::::::::::~:~:::~:::::::::~:~:~:~~1<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<<<<<~4.       ",
-"      33::~::::::~:::~::~::~:~:::~::::::::::~::::::::::::::::~2<<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<~|]       ",
-"      3!::::~:::::::::::::::::::::::::~:~:::::~:~:~::::::::~:::1<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<<1-.       ",
-"     -3{:::::::~:::~:::~::::::~::~:~::::::::~:::::::~:~:~:::~:::~2<<{<<<<<<<<<<<<<<<{<<{<<{<<<<2<]       ",
-"     -(1:~:::~:::~:::~:::~:~::::::::~::::~::::::::::::::::::::~:::)2<<<<<{<<<{<<<<<<<<<<<<<<<<<<).]      ",
-"     3(:::~:::::::::::::::::::~::~::::~:::::~::~:~::::::~::::::::::~1<<<<<<<<<<<<<<<<<<<<<<{<<<<:@.      ",
-"     33:~::::~:::~:::~:~:::~:::::::::::~:::::::::::~:~::::~:~:::~::::)<<<<<<<<<{<<<<<<<<<<<<<<<<1|]      ",
-"     3-:):::::~:::~:::::::::::~:::~::::::~:::~:::~::::~::::::~::::::::~1<<{<<<<<<<<<<<<<<<<<<{<<13.      ",
-"     3{~~::~::::::::::::~::::::::::~:~::::~::::::::::::::~:::::~::::::::)2<<<<<<<<<{<<<<<<<<<<<<2!.      ",
-"    -(2~~::::::~::~::~::::~:~::~::::::::::::::~::~::::~::::::::::~:~::::::<<<{<<<<<<<<{<<<<<<<<<<2].     ",
-"    3(~1::~::~::::::::~::::::::::~::::~:~:~:::::::~:::::~::~::~::::::~:::::1<<<<{<<<<<<<<<<<<<<<<~].     ",
-"    3(:2:::::::~::~:::::~:~::~:~::::~:::::::~:~::::~::::::::::::~:~::::~::::~<<<<<<<<<<{<<<{<<<<<)@.     ",
-"    33:2::~:::::::::~::::::::::::::::::::::::::::::::~:::~::~::::::::::::~::::2<<<<<<<<<<<<<<<{<<)|.     ",
-"    33~1:::~::~::~:::::::::~::::~:~:~::~::~:::~:~:~:::~::::::~::::~:~:~::::::::1<{<<<<<<<<<<<<<<<2(]     ",
-"    ({11::::::::::::~:~:::::::~:::::::::::::::::::::::::~::::::~:::::::::~:~::~:)<<<<<{<<<<<<<<<<23.     ",
-"    ({1)~::~::~::~:::::::~::~::::::::~::~::~::~::::~:::::~::::::::~::::~:::::::::~<<<<<<<<{<<<<<<2!]     ",
-"   3(22~::::::::::::::~::::::::~::~:::::::::::::~::::~:::::~:~::::::~:::::::~:::::~<<<<<<<<<<<<<<<<.     ",
-"   (()<~~::~::~::~::~:::::~:~:::::::::~::~:~::::::::::::~:::::~:~::::::~::~:::~:::::<<<<<<<{<<{<<<1].    ",
-"   3|:<~::::::::::::::~:~::::~::~:~::::::::::~:~:~::~:::::~:::::::~::::::::::::::::::2<<<<<<<<<<<<)].    ",
-"   3(~<~:~::~::~::~:::::::::::::::::~::~:::::::::::::::~::::::::~:::~:::~:::~:::~:~:::2<<<<<<<<<<<)@.    ",
-"   33~<~:::::::::~::::::::::::~::::::::::~:~:~:~:::~:::::~::~::::::::~::::~::~::::::::~1<<<<<{<<{2)_.    ",
-"   (3)<~:::~::~::::~:~:~:~:~::::::~::~:~::::::::~:::::~:::::::~:~:~::::::::::::::::~::::2<<<<<<<<<1|.    ",
-"   (-1<~:~::::::::::::::::::~::~:::::::::~::::::::~:::::~::~:::::::~::~::::~:~:~:~:::~:::1<<<<<<<<1(.    ",
-"   (!2<~:::~::~:~::~:::~:::::::::::~:::~::::::~::::::~:::::::~::::::::::~::::::::::~:::~::2<<<<<<<1(]    ",
-"   ({2<~::::::::::::~:::~:~::~:~:~::::::::~:::::~::~:::~:::::::~:~::~::::::::~:::::::::::::2<<<<<<13.    ",
-"   ({2<):~::~:::~::::::::::::::::::~:::::::~:~:::::::::::~::~:::::::::~:~:~:::::~:::~:::~:::2<{<<<2!.    ",
-"  3(22<)::::::~:::::::~::::~::::::::~:~:~::::::~:::::~:::::::~::::~::::::::~::~::~::::~::::::2<<<<2{]    ",
-"  (|2<<1:::~::::::~:~::::~:::~:~::::::::::::~:::~:~:::~::~::::::~::::::::::::::::::~::::~::~::2<<<1{.    ",
-"  3|)<<1:~:::~::::::::::::::::::~:~::::::::::::::::::::::::~:~::::~:~:~::~::~::~::::::::::::::~2<<21.    ",
-"  (|)<<2::::::~:~:::~::~:~::::::::::~:~:~:~::~::::~:::::~:::::::~::::::::::::::::::::~::~::~:::~<<12].   ",
-"  (|)<<2::~:::::::::::::::~:~:~::::::::::::~::::~:::~:~:::~:::::::~::~:~::~::~::~:~:::::::::::::~2)2].   ",
-"  (|~<<<::~::~:::~:::~:::::::::::~::::::~::::~::::::::::::::~:~::::::::::::::::::::::~::~:::~::::::~.]   ",
-"  (|:<<<:::::::~:::~::::~::::::::::~:~:::~::::::::~::::~:::::::~:::~:~::~:~:::~::~::::::::~:::~::~::..   ",
-"  ||:<<<):::~::::::::::::::~:~:~:~:::::::::::~:~::::~:::~::~:::::~:::::::::~::::::::~::~:::::::::::~].   ",
-"  (|:2<<1::~::~:~::~:~:::::::::::::~:::::~:~:::::::::::::::::~:::::::~:::::::~::~::::::::~::~::~:::~].   ",
-"  ||:<<<2::::::::::::::~:~:::~:::~::::~::::::::~:~::~::~::~::::~::~::::~::~::::::::~::~:::::::::::::..   ",
-"  ||:2<<2:~::::~::::::::::~::::::::~:::::~::~:::::::::::::::~::::::~::::::::~::~::::::::~::~::~::~::].   ",
-"  ||:2<<2~::~::::~:~:~:~:::::::::::::::~::::::::~::~::~::~:::::~::::::~::~::::::::~::~:::::::::::::)].   ",
-"  |_)1<<{~::::~:::::::::::~:~:~::::~:~::::~::::::::::::::::~:::::~::~::::::~::~::::::::~::~::~::~::2..   ",
-"  ||11<2<1:~:::~:::~::::~::::::::~::::::::::~::~::~::~::~:::::~:::::::::~::::::::~::~::::::::::::::2].   ",
-"  (_<)<<<<:::::::~:::~::::::~:~:::::::~:~:::::::::::::::::~:::::~::::~::::~::~::::::::~::~::~::~:::{.    ",
-"  |_{)<<<<~~::~::::::::::::::::::~:~:::::::~::~::~::~::~:::::~::::~:::::::::::::~::~::::::::::::~::-.    ",
-"   _!~<<{<1:::::~::~::~:~:~:::~:::::~::~:~:::::::::::::::~:::::~::::~::~:~::~::::::::~::~::~:::::::(.    ",
-"   _3:<<<<<~:~:::::::::::::::::::::::::::::::~::~::~::~:::::~::::~:::::::::::::~::~::::::::::~:::~:|.    ",
-"   _|:2<<<<~:::~:~::~:::::~:~:::~:~::~:::~::::::::::::::~::::::::::~::~:::~::~::::::~::~:::::::~::~@.    ",
-"   44:1<<<<<::::::::::~:~:::::~:::::::::::::~::~::~::~:::::~:~::~::::::~:::::::::~:::::::~::~:::::~..    ",
-"   442)<<<<<):::~:~::::::::::::::::~:~:~:::::::::::::::~::::::::::~::::::~::::~::::~::~:::::::::::{.     ",
-"    @!~<<<<<2~:::::~::~::::~::~:~:::::::~::~::~::~::~:::~:::~::~:::~:::::::~::::::::::::~::~::~:::(.     ",
-"    4(:<<<<<<~:::::::::~:::::::::::::~::::::::::::::::::::~::::::::::~:~:::::~::~:~:::::::::::::~:_.     ",
-"    @4~1<{<<<2~:~::~:::::~:~:::::~::::::~::~::~::~::~:::::::~::~::::::::::~:::::::::~::~::~::~:::)].     ",
-"    @@<~<2<<<<)::::::~::::::~::~::::::::::::::::::::::~:~::::::::~:~::~:::::~::~:::::::::::::::::-.      ",
-"     @(:<<<<<<<~::~::::~::::::::::~:~:~:::~::~::~::~::::::::::~::::::::::~::::::~::~::~::~::~::~:|.      ",
-"     @4:2<<{<<<2::::~:::::~::~:::::::::::::::::::::::~:::~:~::::~:::~::~:::~::::::::::::::::::::~].      ",
-"     ]@{)<2<<<<<)~::::::~:::::::~:~::~:~::~:~::~::~:::~::::::::::~::::::::::~:::::~::~::~::~::~:-.       ",
-"      ](:<<<<<<<<~::~:~::::~::~:::::::::::::::::::::::::~:::~:~::::~::::~:::::~:~:::::::::::::::4.       ",
-"      ]])){<2{<<<2~:::::~::::::::::~:::~::::~::~::~::::::~:::::::::::~::::::::::::::~::~::~::~:<..       ",
-"      @]3:<<<<<<<<<:::::::::~:::::::~::::~::::::::::~:~::::~:::~::~::::~::~:~::::~:::::::::::::|.        ",
-"       ]@:2<<2{<<<<<~:::~:~::::~:~:::~::::::::~::~::::::::::::::::::::::::::::~:::::::~::~::~:1].        ",
-"       @]3:<{2<<<<<<<~:::::::~::::::::::~::~:::::::~:::~::~::~::~::~:~::~:::::::~::~:::::::::~(.         ",
-"        ]@~1<<<2{<<<<2~:::~:::::::~::~:::::::~::~:::::::::::::::::::::::::~::~::::::::~::~:::1..         ",
-"        @]3:<<<<<<<<{2<1:::~::~::::::::~::::::::::~::~::~::~::~::~::::~::::::::~::~::::::::~:|.          ",
-"         ]]11<<<<<<<<<<<1:::::::~:~::::::~::~::~:::::::::::::::::::~:::::~::~::::::::~::~:::<..          ",
-"          ](~2<{2<<<<<<<<<~:~:::::~::~:::::::::::~::~::~::~::~::~::::~::::::::~::~::::::::::_.           ",
-"          ]]{~<<<<<<<<<<{<<1~:::::::::::~::~::~:::::::::::::::::::::::::~::~::::::~::~::~::-..           ",
-"           ]4~1<<{<<<<<<<<<<<1~::~:~::::::::::::~::~::~::~::~::~::~:~::::::::~::::::::::::2].            ",
-"           ]](:2<<<{<<<<<<<<<<<1~:::~::~::~::~:::::::::::::::::::::::::~::~:::::~:::~::~:~|.             ",
-"            ]]{~2<<<<<<<<<<<<<<<<2)::::::::::::~::~::~::~::~::~::~:::~::::::~:::::~::::::3..             ",
-"             ]]1~<<<<<<<<<<<<<<<<<<<2)~::~::~:::::::::::::::::::::~::::::~:::::~::::~:::<].              ",
-"              ]4~)<{<<<<<<<<<<<<<<<<<<<<1~~:::~::~::~::~::~::~::::::::~::::~::::::::::~)@.               ",
-"              ]]|:1<<<<{<{<<<<<<<<<<<<<<<<<221)1~~~:::::::::::~::::~::::~::::~::~:::~::4.                ",
-"               ]](:1<<<<<<<{<{<<<<<<<<<<<<<<<<<<2<<<<221~~::::::~:::::::::::::::::~::~|..                ",
-"                ]]3:1<<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<<2<1)::::::~:~::~:~::~::~::::~3..                 ",
-"                 ]]3:)<<<<<<<<<<<<{<<<<<{<<<<<<<<<<<<<<<<<<<21:~::::::::::::::::::::3..                  ",
-"                  ]]3:~2<<<<<<<<<<<<{<<<2{<<<<<<<<<<<<<<<<<<<<1:::::~:::~::~::~:~::(..                   ",
-"                   ]](:~1<<<<<<<<<<<<<<<<<<<{<<{<<{<<<<<<<<<<<<<):~:::~::::::::::~(..                    ",
-"                    .]|~:)<<<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<{<<<~:::::::~::~:::~|..                     ",
-"                     ].42:~2<<<<<<<<<<<<<<<<<<<<<<<<{<<{<<<<<<<<<<~:::::::::::~14..                      ",
-"                      ]]@!::~2{<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<<<2::~:~::~:::{].                        ",
-"                        .]()::)2<{<<<<<<<<<<{<<<<{<<<<<<<{<<<<<<<<<~::::::::)3..                         ",
-"                         ..@{:::)2<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<)::::~::{4..                          ",
-"                           ..|2:::~1<<<<<{<<<<<<<<<<<{<<<<<<<{<<<<<):~:::)(..                            ",
-"                            ].](1~::~12<<<<<<<<<<<<<<<<<<{<<<<<<<<<~:::~3]..                             ",
-"                              ..](2::::~)1<<<{<<<{<<<<<<<<<<<<<{<<1::)3@..                               ",
-"                                ...|{~:::~:))2<<<<<<<<<<<<<<<<<<<1:2(]..                                 ",
-"                                  ...@({:::::::~)12<<<{<<<<{<<1)134...                                   ",
-"                                    ....]|3<~~:::::::::~~)~~1!(4....                                     ",
-"                                       .....]@|((-!{{{!33|_].....                                        ",
-"                                           ..................                                            ",
-"                                                                                                         ",
-"                                                                                                         ",
-"                                                                                                         "};
diff --git a/perl-install/pixmaps/mouse_3b.xpm b/perl-install/pixmaps/mouse_3b.xpm
deleted file mode 100644
index 4c8a3bd9a..000000000
--- a/perl-install/pixmaps/mouse_3b.xpm
+++ /dev/null
@@ -1,386 +0,0 @@
-/* XPM */
-static char * mouse_3b_xpm[] = {
-"210 350 33 1",
-" 	c None",
-".	c #0A1630",
-"+	c #FE9A02",
-"@	c #253359",
-"#	c #C99121",
-"$	c #F3AE18",
-"%	c #D6A02C",
-"&	c #96762E",
-"*	c #3E4862",
-"=	c #B68626",
-"-	c #FDB820",
-";	c #FE9E02",
-">	c #E6AA32",
-",	c #A67E2A",
-"'	c #F2B22A",
-")	c #7B84A1",
-"!	c #7C673B",
-"~	c #5C6888",
-"{	c #B79346",
-"]	c #0E1A3A",
-"^	c #F2B22E",
-"/	c #BABEDA",
-"(	c #848CAA",
-"_	c #4A5778",
-":	c #FEA206",
-"<	c #A7A9C8",
-"[	c #757C94",
-"}	c #9A9ABE",
-"|	c #9FA1C0",
-"1	c #11244D",
-"2	c #AFB0CD",
-"3	c #697392",
-"4	c #FEB212",
-"                                                                                                 ~_3}}}]].                                                                                                        ",
-"                                                                                                 ~_)}}}]..                                                                                                        ",
-"                                                                                                 ~_)}}3].                                                                                                         ",
-"                                                                                                 __(}}3].                                                                                                         ",
-"                                                                                                ~~*|}}3]]                                                                                                         ",
-"                                                                                                ~__}}}_].                                                                                                         ",
-"                                                                                                ~~*|}}_].                                                                                                         ",
-"                                                                                                __~}}}*].                                                                                                         ",
-"                                                                                                ~__|}}@].                                                                                                         ",
-"                                                                                                ~~_}}}*].                                                                                                         ",
-"                                                                                                ~_~}}(@].                                                                                                         ",
-"                                                                                                __3}}}@].                                                                                                         ",
-"                                                                                                __3}}}]].                                                                                                         ",
-"                                                                                                __~}}}1].                                                                                                         ",
-"                                                                                                __3}}(]].                                                                                                         ",
-"                                                                                                __~}}}1]]                                                                                                         ",
-"                                                                                                __3}}(]].                                                                                                         ",
-"                                                                                                ~_[}}}1.]                                                                                                         ",
-"                                                                                                __)}}(1..                                                                                                         ",
-"                                                                                                __)}}}]]]                                                                                                         ",
-"                                                                                                _*)}}}]..                                                                                                         ",
-"                                                                                                _*)}}}1]]                                                                                                         ",
-"                                                                                                _*)}}(]].                                                                                                         ",
-"                                                                                                _*~}}}1.]                                                                                                         ",
-"                                                                                                __~}}(1..                                                                                                         ",
-"                                                                                                __3}}}]]]                                                                                                         ",
-"                                                                                                _*~}}}]]]                                                                                                         ",
-"                                                                                                __~}}}@].                                                                                                         ",
-"                                                                                                **3}}}@]]                                                                                                         ",
-"                                                                                                **_}}}*].                                                                                                         ",
-"                                                                                                **_}}}@]]                                                                                                         ",
-"                                                                                                ___}}}*1]                                                                                                         ",
-"                                                                                                ~_*}}}_1]                                                                                                         ",
-"                                                                                                )3*}}}_111                                                                                                        ",
-"                                                                                                (3*}}})@1@@                                                                                                       ",
-"                                                                                               |(~[}}}}}*@@@                                                                                                      ",
-"                                                                                              }(~)}}}}}}}_*@@                                                                                                     ",
-"                                                                                             [)~)|}}}}}}}}_@11                                                                                                    ",
-"                                                                                             ~_~|}}}}}}}}}}~]1                                                                                                    ",
-"                                                                                             __*}}}}}}}}}}}}1]]                                                                                                   ",
-"                                                                                             ***}}}}}}}(}}}}@1]                                                                                                   ",
-"                                                                                             _**}}}}}}}}}}}}*]]                                                                                                   ",
-"                                                                                             ***}}}(}}}}}}}}_1]                                                                                                   ",
-"                                                                                              **[}}}}}}}}}}}[]]                                                                                                   ",
-"                                                                                              **)}}}}}}}}}}}(]]]                                                                                                  ",
-"                                                                                              _*)}}}}}}}}}}}}1]]                                                                                                  ",
-"                                                                                              _*3}}}(}}}}}}}}@1]                                                                                                  ",
-"                                                                                              **~}}}}}}(}}}}}_]]                                                                                                  ",
-"                                                                                              __~}}}}}}}}}}}}~]]                                                                                                  ",
-"                                                                                              3_~}}}}}}}}}}}}31]                                                                                                  ",
-"                                                                                              )~_[3____**__~~~111                                                                                                 ",
-"                                                                                             <)~@111111111111111*_[)                                                                                              ",
-"                                                                                        2<<||(3*@11111@**11111@@*_3[))))                                                                                          ",
-"                                                                                     2<<||()3[[)(}///////////2}}[33~~333[[[                                                                                       ",
-"                                                                                   2<<}(3)(</////////////////2//////<([~~~3333                                                                                    ",
-"                                                                                2<<}([(|///////2<<|||}}(}}}}}}}}|<22////|)__~~33                                                                                  ",
-"                                                                              22|()~*)///22||}}}}}}}}}}}}(}}}}}}}}}}|2///)@@*__~~~                                                                                ",
-"                                                                            22|([[%_1@//}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}<//@11!!@*__~~                                                                              ",
-"                                                                          22|(3&'--#11[/|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}2}11@4->!@*___~                                                                            ",
-"                                                                         22([)>-444-@1_/2}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}_11!4444%!@*____                                                                          ",
-"                                                                       22}[[%--4-444!11//}}(}}}}(}}}}}}}}}}}}}(}}}}}}}}}@11#44-444#*@*____                                                                        ",
-"                                                                      2|(3{--444444$,11(/2}}}}}}}}}}}}}}}}}}}}|(}}}}}}}(111444444-4-=@@**_*                                                                       ",
-"                                                                    22}[['-444$::444%11[/2}}}}}}}}(}}(}}}}}}}}}}}}(}}}}[11*444444444-$!@@**_                                                                      ",
-"                                                                   2|(3{-444:++++444411_//|}}(}}}}}}}}}(}}}}}}}}}}}}}}}311!444444444444{@@****                                                                    ",
-"                                                                  2|)[$-4$+++++++4444*1*//2}}}}}}}}}}}}}}}}}}}}}}}}}}}<*11=4444-44-4444-$_@@***                                                                   ",
-"                                                                22([,-44;+++++++44444!11///}}}}}}}}}}}}}}}}(}}}}}}(}}}/@11%4-4444444444444&@@*@*                                                                  ",
-"                                                               2<(3{-4;++++++++;44444!11<2/2}}}}}}}}}}}}(}}}}}}(}}}}}}/1114444-444444-444-4{@@@*@                                                                 ",
-"                                                              2|(3>-$+++++++++;4-4444=11}///}(}}}}}}}}}}}}}}}}}}}}}}}<}11@44444-44-444444444%*@@*@@                                                               ",
-"                                                             2|)3'4;++++++++++$444-44#11[///<}}}}(}}(}}}}}}}}}}}}}}}}2}11*44-4444444444444444$*@@*@@                                                              ",
-"                                                            <})&'4;++++++++++$4444444>113///2}}}}}}}}}}}}}}}}}}}}}}}}/311!44444-44-44-444444444_@@@@@                                                             ",
-"                                                           <|[[-$+++++++++++:44444444411~2///}}}}}}}}}}}}(}}}}}}}(}}}/~11!444-444444444444444444!1@*@@                                                            ",
-"                                                          <}[&-$+++++++++++:444-444-44@1*////2}}}}}}}(}}}}}(}}}}}}}}|/_11&-444444-44-44-44-44444'!1@@@1                                                           ",
-"                                                         <}3[-:++++++++++++444444-4444*1*//2//}}}(}}}}}}}}}}}}(}}}}}</*11#4444-4444444444444-4444-!1@@@1                                                          ",
-"                                                        <}[&-:+++++++++++:4444-4444444*1@////2<}}}}}}}}}}}}}}}}}}}}}</*11#4-4444-44-44-44-4444444$'!1@@11                                                         ",
-"                                                       <|[[-$++++++++++++4444444444444!11//////}}}}}}}(}}}}}}}}}}}}}2/@11$444-4444444444444-44-44444_1@@11                                                        ",
-"                                                      <})&-:++++++++++++44-444-44444-4&1]////2/|}}}}}}}}}}}}}}}}}}}}2/111444444444-44-44-444444444444!1@@11                                                       ",
-"                                                     <|)3'$++++++++++++$4444-444-44444!11/2////2}}}(}}}}}}}}}}}}}}}}2/11144-444-4444444444-44444444444*1@@1                                                       ",
-"                                                     |(~'4++++++++++++4444444444444444=11}//////|}}}}}}}}(}}(}}(}}}}//11@444-4444-44-44-4444-444444444$*1@11                                                      ",
-"                                                    |(3%4++++++++++++$4444-444-44-4444#11}2/////2}}}}}(}}}}}}}}}}}}}/|11*-4444-444444444444444-44-44444$@1@11                                                     ",
-"                                                   <(~%-++++++++++++444-444-444444444-=11}///2///}}}}}}}}}}}}}}}}}}}/}11*444444444-44-44-44-444444444444#@1111                                                    ",
-"                                                  |}[=-;+++++++++++:444444444-4444444-#11(/////2/2}}}}}}}}}}}}}}}}}}2}11*44-4444-444444444444-4444-444444,1@111                                                   ",
-"                                                 |}[[-:+++++++++++$4444-44-44444-44444>11(/2//////}}}}}}}}}}(}}}}}}|/}11_4444-444444-44-44-4444-444444444-!1111                                                   ",
-"                                                 |)3'4+++++++++++:4444444444-44444-4444113///2///2<}}}}(}}}}}}}(}}}|/}11&444444-44-444444444-4444444444444-*1@]1                                                  ",
-"                                                |(3%-+++++++++++$444-4444-44444-444444^11~////////2}}}}}}}}}}}}}}}}}/(1]&444-444444444-44-444444-4444-44444:@1111                                                 ",
-"                                               |}~{4:++++++++++:444444-4444-44444444444113////2////<}}}}}}}}}}}}}}}|/311!44444-44-44-444444-44-444-4444-4444=1@111                                                ",
-"                                              ||[[-:++++++++++44444-44444444-44-4444-4^11~/2///////2}}}}}}}(}}}}}}}|2311&44-444444444444-44444444444444444-44!1111                                                ",
-"                                              })~44++++++++++;4444444-44-44444444-44444113//////////<}}(}}}}}}}(}}}|/311!-444-44-44-44-444-44-44-44-444444444-*1111                                               ",
-"                                             |(~%-;+++++++++$44-44-444444-4444-44444444*1~///2/2////2}}}}}}}}}}}}}}|/311&444444444444444444444444444-444444444%111]1                                              ",
-"                                            |}[,-:+++++++++;-4444444-444444-44444444444*1_/2//////2//<}}}}}}}}}}}}}|/~11=444-44-44-44-44-444-44-444444444$44444&1111                                              ",
-"                                            })~'4+++++++++$444444-444-44-4444-44-444-44*1*/////2/////2}}}}(}}}}}}}}|/311#-444444444444444-444444-444-44444:44444*11]1                                             ",
-"                                           }(~%';++++++++;4444-44444444444-444444444444*1*////////////<}}}}}}}}}}}}|/3]1#44-44-44-44-444444-444444-44444444;4444%11111                                            ",
-"                                          }}[)4$++++++++:44444444-44-44-44444-44-444444*1*/2/////2////2}}}}}(}}}}}}|2311#444444444444-44-444-44-4444-444444::4444&111]                                            ",
-"                                          })~44++++++++;-444-44444444444444-44444444444*1*///2/////////<}}}}}}}(}}}|/311#444-444-444444444444444444444444444;$444-*1111                                           ",
-"                                         |(3{-:+++++++:444444-44-444-444-44444-44-44444*1*///////2/2///2}}}}}}}}}}}}/311#-444-4444-44444-444-444-444-4444444:+4444#111]1                                          ",
-"                                         }[344+++++++;4444-4444444-444-444444444444-444*1*/2//2/////////<}}}}}}}}}}}2_11#44444444444-44444-444-444-444-4444-4;;444-!111]                                          ",
-"                                        })~>-;++++++:4444444444-4444444444-44-44-444444*1*/////////2////2}}}(}}}}}}}/*11#4-444-44-44444-4444444444444444-44444+;444>@1111                                         ",
-"                                       }(3,-4++++++;-444-444-4444-44-444-44444444444444*1*/2////////2////2}}}}}}}}}}/*11#444-444444-4444444-444-444-4444444444;+:444&111]                                         ",
-"                                       })3'4++++++:44-444-4444-444444-444444-44-44-4444*1*////2/2/////////|}}}}}}}}}/*11#4444444-4444-44-444-444-4444-44-44444:++444-@1111                                        ",
-"                                      }(3{44++++++444444444-4444-444444-44-444444444444*1*//2////////2///2/}}(}}}}}}/*11#44-44-444-444444444444444-444444444444+++444#111]                                        ",
-"                                      ([3-4+++++;4444-44-44444444-44-4444444-44-44-4444*1*////////2///2////<}}}}}(}}/*11#444444444444-44-444-44-44444-44-44444-:++;444*1111                                       ",
-"                                     }(~%4$+++++4444444444-44-44444444-4444444444444-44*1*///2/2//////////2/}}}}}}}|/*11#444-444-444444444-44444444-444444-44444+++$44;111]1                                      ",
-"                                     ([344+++++44444444-44444444444-4444-44-44-44-44444*1*2////////////2////2}}}}}}}/*11#-444-444-44-44-4444-444-444444-44444444++++4-$!111]                                      ",
-"                                    })~$4$++++4444-44-444-44-44-44444444444444444444444*1_2///2//2/2/////////<}}}}}</~11#444444444444444444444-444-44-444-444444:++++44%1111]                                     ",
-"                                    (3&44++++$44444444444444444444-44-44-444-44-44-4444*1*/2////////////2/////|}}}}2/311#-444-4444-44-44-44-44444444444444-4444-:++++:44!11]1                                     ",
-"                                   })~>-:+++:4444-4444-444-44-44-444444444-444444444-44*1*///2//2///2/////2////<}}|//~11#444444-4444444444444-44-444-44-4444-4444+++++44$@11]1                                    ",
-"                                   ([[-4;++$44-4444-444-444444444444-44-444444-44-4444411~///////2///2///////2//22///311#-44-4444-44-44-44-444444-444444444444444+++++;44!111]                                    ",
-"                                  })~>44++;44444-44444444-44-4444-4444444-44-4444444444113/2//2////////2///2///////2/311,44444-4444444444444-444444-44-44-4444444;+++++:4$@111]                                   ",
-"                                  ([&-4++:444444444-44-4444444-4444-44-4444444-44-444--113///////2//////2////2///////311!44-4444444-44-44-444-44-4444444444444444:++++++44&11]1                                   ",
-"                                 })~>-4+;444-4444-444444-44-4444-4444444-4444444444-4441132////////2/2/////////2////2311&4444-44-44444444444444444-44-44-44-44444:++++++;4>@11]]                                  ",
-"                                 ([&-4:+444444-444444-4444444-4444444-4444-44-44-444444113///2//2////////2///////2///}11!4444444444-44-444-4444-444444444444-4444:+++++++:4!1111                                  ",
-"                                ()~>'4+$444-4444-44-444-4444444-44-444444444444444444-#11[/2/////2////2////2/////////(11&444-44-44444444-444-4444-44-44-444444444:++++++++4%111]                                  ",
-"                                (3[-4::444444-44444444444-44-444444444-44-444-44-44444#11}/////////2////////2/2///2//}11!444444444-44-444444444444444444-444-444-:+++++++;:4!111]                                 ",
-"                               ((~#-4:444-44444-4444-444444444-44-44-444444-444444-444#11(///2/////////2////////2///2}11*4444-444444444-44-44-44-44-444444-444-44:+++++++++4%1111                                 ",
-"                               ([3-4$44444-444444-444-44-44-444444444444-444444-444444{11}////2/2///2///2/////////////11*4-444-44-44-444444444444444-44-44444444-++++++++++:4_11]]                                ",
-"                              ((~=-4:4444444-4444444444444444-44-44-44-444-44-44444444!11}/2//////2///////2/2/////2///11*4444444444444-44-44-44-444444444-44-4444+++++++++++4#111]                                ",
-"                              ([~-4444-444444-444-44-44-44-444444444444444444444-4444-!11///////////2//////////2////2/1114-44-44-44-4444444444444-4444-444444444$+++++++++++:4*111]                               ",
-"                              (3=44:4444-444444-444444444444-44-44-44-44-44444-444-444!11////2////////2//////2////////*11444444444444-44-44-4444444-4444-4444444:+++++++++++:4,111]                               ",
-"                             ()_{44444444-44-444444-44-44-44444444444444444-444444444-*11/2/////2///////2/2//////2///2*11444-44-44-4444444444-44-4444444444-4444+++++++++++++4#11]1                               ",
-"                             (3*&4444-44444444-44-444444444-44-44-44-44-44444-44-44444*1*/////2///2////////////2///2//*11#4444444444-44-44-4444444-44-444-444444+++++++++++++4,1111]                              ",
-"                            ()~@!44444-4444-444444444-44-44444444444444444-44444444444@1*//2/////////2//////2/////////311#4444-44-4444444444-44-444444-4444-444++++++++++++++$!111]1                              ",
-"                            ([_1@-444444-4444-4444-4444444-44-44-44-44-44444-4444-444411_///////2//////2/2///////2////311,44-444444-44-4444444444-4444444444444++++++++++++++:*1111]]                             ",
-"                            )~_@1%-44-444444444-4444-44-44444444444444444-4444-444444$11~//2/2/////2/////////2/////2//(11&444444-4444444-44-44-4444-444-44-444+++++++++++++++%1111111                             ",
-"                           ([_}11!44444-44-444444-4444444-44-44-44-44-444444444444-44#113////////2///2////2////2//////}11!4444-444-44-4444444444-4444-444444-:++++++++++++++$&111@)1]                             ",
-"                           )33/*]1%44444444-44-4444444-444444444444444-44-44-44-444-4=11(/////2////////2////////////2/<1]*4-44444444444-44-44-4444-4444-44444++++++++++++++;;@111[/11]                            ",
-"                          ()~</}11*44-44-4444444-44-4444-44-44-44-4444444444444444444!11}/2////////2///////2/////2/////11@444-44-444444444444444444444444-44+++++++++++++++4_]11@//_1]                            ",
-"                          )3~///*11&444444444-44444444444444444444-44-44-44-44-44444$!112//2////2///////2///2/2/////2//@11444444444-44-44-44-44-444-44-4444+++++++++++++++4=1111(//|11]                           ",
-"                          )~(///<@11%4444-44444-44-44-444-44-4444444444444444444-4444*11/////2//////2//////////////////*11>4444-44444444444444444-44444444;++++++++++++++4#@111~///2*]]                           ",
-"                         ))_/////(111%-44444-444444444-44444444-4444-44-44-44-44444-4@1*/////////2//////2///////2///2//~11#4-44444-44-44-44-44-444444-444++++++++++++++:4#@111@2/2//311                           ",
-"                         )33//2///[11@=44-4444-44-444444-44-44444-444444444444444444411_2/2///2//////2////2//2/////////[11&444-44444444444444444-44-444$++++++++++++++$4%@]11*2/2}2/<1]]                          ",
-"                         )~}///2///~111&4444444444-44-44444444-4444444-44-44-44-4444#113///2//////2/////////////2///2//}11!444444-44-44-44-44-44444444;+++++++++++++:44&]111*2/2}}<//*1]                          ",
-"                        )[_/////////)111*>444-444444444-44-44444-44-4444444444444444,11(///////2/////2//2/////2///////2<11*44-44444444444444444-4444$++++++++++++++$4:_1111_2/|}}}|//)1]                          ",
-"                        )3[/////2//2/}@111&444-44-44-44444444-4444444-44-44-44-444-4!11}////2/////2////////2/////2//////@1@44444-44-44-44-44-444444:++++++++++++;444&@11113/2|}}}}}2/211]                         ",
-"                       ))_<//2///////22_111@,444444444-44-44444-44-4444444444444-44-*11//2////////////2////////////2////*11>444444444444444444-44;++++++++++++;444#@1]11@}22}}}}}}}<//*1]                         ",
-"                       )3~//////2///////(@111@,4-44-44444444-4444444444-44-44-444444@1*//////2//2//2////2//2//2/////2/2/~11=-44-444-444-44-444$:+++++++++++;4444,@1111@3/2|}}}}}}}}}//(1]                         ",
-"                       )3[////////2//////23@111@!%444-44-44444-44-44-44444444444444%]1_///2///2//////2//////////2///////[11&44444-444-444444$+++++++++++:$444%!@11111_</2|}}}}}}(}}}2//11]                        ",
-"                      )[_<///2/////////////23@1111*&>444444-44444444444-44-44-44444,11)2/////////2/////////2////////////|1]*44-44444444444;+++++++;;:444-4:,*111111_</2}}}}}}}}}}}}}<//_]]                        ",
-"                      )3~//2///2///2//2//////2)@11111*&%44444-44-44-44444444444-444!11<///2////2//2//2/2/////2///2//2////@1@4444-44-44$;+++++;::$44-444#&*111111@3//2|}}}}}}}}}}}}}}}//(1]                        ",
-"                      )~[///////2//////2//2/////|_11111]@!,%4444444444-44-44-44444$*1@//////2///////////2/////2///////2//*11%44444$:;+;:::$44444444%,!@1111111~(//2|}}}}}}}(}}}}}}}}}2//11]                       ",
-"                     ))~<////2//////2///////2//////(_@1111]1@*&=%4-444444444444444%11_//2/////////2///////2///////2//////311&444$:444444444444$#!_@]111111@_)2//<|}}}}}}}}}}}}}}}(}}}<//*1]                       ",
-"                     [3_//2//////2/////2/////2////////|3*11111111@*!&#>4-44-44-444,11(////2//2/2//////2////////2//////2//|1]*44444444444%#&!*@111]11111*~}////2}}}}}}}}(}}}}}}}}}}}}}}//)1]                       ",
-"                     )3)//////////////////2////2//////////}3_11111111111@*!!,##$44*1@/2///////////2////2///2///////2//////@11%44##,!!**111111111111*3(2////2|}}}}}}}}}}}}}}}}}}}}}}}}}2/21]]                      ",
-"                     [_|///2//2////2///2//////////2/2/2//2////2(3**111111111111111111_~3~~(}(}(}(|//2///2//////|(}(}(}(3~3*11111111111111111]@*3)|//////2|}}}}}}}}}}}}}}}}}}(}}}}}}}}}<//*1]                      ",
-"                    )3_/////////2////////////2/////////////2//////2/}}3~**111111111111111111111111111111111111111111111111111111111111@*_~)}2////////<||}}}}}}}}}}}}}}}}(}}}}}}}}}(}}}}/2[1]                      ",
-"                    )33////2///////2///2//2////2////////////////////////////(}(33_***111111111111111111111111111111111111111***~~3}}<2///////////2<|}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}2/<]1]                     ",
-"                    [~}//2///2///////2///////////2/2//2/2///2//2////<<22/2///////////////2}}}}}}}3333333~3~3~333(}}}(}}|//////////2///////2/22<|}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}2//@]]                     ",
-"                   )3_////////2/2//////2////2////////////2///////2////2|}|<<22/2///////////2/2/2///////////////////////////////////2///22<<|}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}//~1]                     ",
-"                   )33/////2//////2//////2////2/////2///////2//////2////2<}}}}}}||<<22///////////2/2//2//////2///2///2//2////2//2222||}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}(}}}(}}}}(}}}}}}}}2/(1]                     ",
-"                   3~)//2////////////////////////2///////2////2///////2////<}}}}}}}}}}(}(|||<<<<222222////2///////222222<<<|||}}|}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}2//@1]                    ",
-"                  )[_2///////2//2///2//2///2///2/////2//////////2///2////2///2<}}}}}}}}}}}}}}}}}|}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}|//*]]                    ",
-"                  [3~////2///////2//////2///2/////2////////2//////////2////2///2<}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}(}}(}}}}}}(}}}}}}}}}}}}//[1]                    ",
-"                  [~)//2///2/////////2////////////////2/2////2///2///////////2////<|}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}}(}}}}}}}}}}}(}}}}2/|1]]                   ",
-"                  [~(////////2////2/////2///2//2///2//////////2////////2////////////2|}}}}(}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}}}}}}}}}}}(}}}(}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}<//@1]                   ",
-"                 [3_/////2/////2/////////////////2///////2////////2//////2////////////2<}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}(}}}}}(}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}//_1]                   ",
-"                 [33//2////////////2////2///2//////2//2///2////2////2/////2//2/2/////////2}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}(}}}}}}}}}(}}}}}}}}(}}}}(}}}}(}}}}}}}}}}2/(]]                   ",
-"                 3~)//////2//2///////2////////2/////////////2/////////2//////////2/////////2|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}2/21]]                  ",
-"                 [_<///2////////2////////2////////////2////////2/2////////2////////2/2/2//2//2|}}}}}}}(}}(}}}(}}}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}|//@1]                  ",
-"                [3_///////2///2///2///2////2///2/2//2///2//////////2///2////2//2///////////////2|}}}}}}}}}}}}}}}(}}}(}}}}}}(}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}(}}}}}}}}}}}}//~1]                  ",
-"                333////2////////////////////2////////////2//2///////2////////////2/////2/////////2<}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}(}}}}}}}}}}(}}}}}}}}}}(}}}}}2/)]]                  ",
-"                [~(//2/////2////2///2///2/////////2///2///////2//2///////2///2///////////2/2///////2<}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}</21]]                 ",
-"                3_|/////2////2///////2//////2//2//////////2///////////2//////////2//2///////2/////////<}(}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}|//@1]                 ",
-"               [3~///////////////2///////2//////////2///////2//2///2//////2///2////////2////////////////<}}}}}}(}}}}}}}}}(}}}}}}(}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}}}//~]]                 ",
-"               [~3///2//2/2///2///////2/////2////2/////2///////////////2////2////2//2////////2/2//2/2/////<}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}}}2/)1]                 ",
-"               3~(//////////2/////2///////////2//////////2///2///2///2//////////////////2/2///////////2////2<}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}(}</|1]]                ",
-"               3_|2/2/2////////2///2////2/////////2/2/////2///2////////2//2/2/2//2///2/////2///2////////2/////|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|//@]]                ",
-"              [3_///////2////2///////2////2/2///2/////2///////////2//////////////////////////////2//2/////////22|}}}}(}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(}}}}}}}(}}}}(}}}(}}}}}}}}}}}}}}}}}(}}}}}2/_1]                ",
-"              33~/////////2////2//////////////////////////2////2/////////2////2///2//2/2////2/////////////2//////2}}}}}}}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}(}}}}}}}}}}}}}2/3]]                ",
-"              3~)//2/2///////////2///2//2////2////2////2/////2/////2/2///////////////////2////2///2///2/2///2//////2|}}}}}}}}(}}}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}</}1]                ",
-"              3_}//////2/2/2/2/////2//////2////2////2/////2//////2//////2//2///2//2////////////2/////////////////////<}}(}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}(}}}}(}}}}(}}}}}}}}}}}}}}}}}}}}}}|//1]]               ",
-"             [3_/////////////////2////2////////////////////////2///2//2///////////////2//2/2///////2//////2///2/////2//<}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}2/*]]               ",
-"             3~~/2/2/2////////2///////////2//2/2//2/2//2////2//////////////2///2///2////////////2//////2/////////2//////2<(}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}(}}}}22~1]               ",
-"             3~3///////2/2/2/////2/2//2/////////2////////2/////2///2///2///////////////2//2//2//////2//////2//2///////////2|}}}(}}}}}}}}(}}}}}}}}}}}}}(}}}}}}(}}}}(}}}}}}}}}}}(}}}}}}(}}}}}}}}</[]]               ",
-"             3~(///////////////2////////2//2/////////2//////////////////////2///2///2////////////2//////2/////////2/2/2/////<}}}}}}}}}}}}}}}}}{}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}|/|1]               ",
-"             3_|////2//////2//////2/////////2///2/2////2/2/2/2/2/2/2/2/2/2///////2////////2///2//////2/////2////2////////2////<}}}}}}}}{}}}}(}}}(}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}//1]]              ",
-"            33_//2/////2//////2/////2/2//2//////////2////////////////////////2//////2/2///////////2/////2///2/////////2/////2//2}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}2/*]]              ",
-"            33~/////2////2/2/////////////////2///////////2////////////////2////////////2/2/2///2//////2//////2/////2/////2///////<}}}}}}}(}}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}(}}}}}}}}}}</~1]              ",
-"            3~3//2//////////////2/2////2//2////2/2//2/2////2///////////2/////2/2/2//////////2//////2////2/////////////2//////2////2<(}}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}</(]]              ",
-"            3~(//////2//////2///////2///////////////////////2/2/2/2/2///////////////////////////2/////////2//2//2/////////2/////////2|}}}}}}}}}}}{}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}/}1]              ",
-"            ~_}///2////2//2////////////2//2/2/////////2/2///////////////2/2//////2/2//2//2///2/////2//////////////2////2/////2/2/2///2<}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}(}}}}}}}}}}}}}}2/]]]             ",
-"           33_//////////////2/2/2///////////////2/2//////////////////2/////////////////////2/////////2//2///2///////2//////////////////2|}}}}}}(}}(}}}}}}{}}}}}}}}}}}(}}}}}}(}}}}}}}(}}}}}}}}}}}2/*]]             ",
-"           3~~/2/2//2//2//////////2/2///////2/2/////////2//2/2/2//2///////2/2/2/////2/2/////////2////////2/////2////////2/2///////2//////|}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}</_1]             ",
-"           3~3//22///////2////////////2/2//////////2//////////////////2////////2////////2//2/2////2///2////2////2//2/////////2/2////2/2///2|}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}|/3]]             ",
-"           ~~)//<///2///////2//2/////////////////2///2/////////2///2//////////////2////////////////2////////2////////2/////////////////2///2<}}}}}}}}}}}}}}}(}}}}}}}}}}(}}}}}}}}}(}}}}}}}}}}}}}}}/(1]             ",
-"           3_|//<//////2//////////2/2////2/2/2/////////2/2/////////////2/2/2///2//////2//2//2/2/2////////2///////2/////2/2///////2///////////2|}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}(}}}}}/21]]            ",
-"           ~_<//|////////2//2//2///////2////////////////////2////2/2/2////////////2////////////////2//2///////2///////////2/2/2////2////2/////2<}}}}(}}}}}}}{}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}2/1]]            ",
-"          33_//2</2/2////////////////////////2/2/2/2/2////////2/////////////2///////2//2///////////////////2//////2/2////////////////2////2/////2|}}}}}}}}}}}}(}}}(}}}}}(}}}}}}}}(}}}}}}}}}}}}}}}</*]]            ",
-"          ~~~//<2/////2//2//////2///2////2//////////////2/2///////////2//2/////2//////////2/2/2////2////2//////2/////2//////////2////////////2////<}}(}}}(}}}}}}}}}(}}}}}}}}(}}}}}}}}}(}}}}}}}}}}|/~]]            ",
-"          3~)//|2//////////2/2////////2////2///////////////2///2////2///////2///2/2/////////////2////2////2/2///////////2//2/2////2////2///2///2///2}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}(}}|/3]]            ",
-"          ~~(//}///2////////////2/2////////////2/2/2/2///////2///2////2//2///////////2/2/////////////////////////2///2//////////////2///2///////2////|}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}/(1]            ",
-"          ~_|/2}/////2/2/2//////////2///2///2/////////2/////////////////////////////////2/2/2////2////2/2///2//////////////////2///////////////////2//<}}}(}}}}}}}}}}}}}}}}}}}}(}}(}}}}}}}}}}}}}}}221]            ",
-"          ~_</<|/////////////2//////////////////////////2/2////2//2/2//2//2/2/2///2///////////2////2/////2////2//2///2//2/2//2///2//2////2/2///2///2//22}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}22]]]           ",
-"         33_//||/2////////2////2/2///2///2///2//////////////2//////////////////2///2////////2//////////////////////2//////////////////2//////////2///////|}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}(}}}2/*]]           ",
-"         ~~~//|<///2///////////////////2////////2/2//2///////2///2///2//2/////////////2//2//////2////2////2//2///////////2/////2////////////2/////////2///<}}}}{(}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}/_]]           ",
-"         3~3//}<////2/2/2//2//////2//////2/2///////////2///////2//////////2////////2////////2/////2////2///////2/////2/////2/////2/2////2/2///////2/////2//2}}}}}}}}}}}}}(}}}}(}}(}}}}}}}}}}}}}}}}}/~]]           ",
-"         ~~)/2}2/////////////2//2///2/////////2////2/////2/2///////2///2////2/2/2/////2///////2/////////////2///2/2/////////2////////2//////2//2/////////2//2}}}}}}(}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}/[]]           ",
-"         ~_(/<}2/////////2//////////////////////2////2///////2///2////2///2/////////////2/2/////2///2///2/2///////////2//2////2////////////////////2//////////|}}}}}}}}(}}}}}}}}}}}}}}}}}}(}}}}(}}}2(1]           ",
-"         ~_|/|}/2/2/2////////2///////2/2//2/2/////////2//2////////2//////////////2/2/////////2///2///2//////2//////2/////////////2////2/2//2//2/2/////2////2//2<}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}22]]           ",
-"        ~3_//}}///////2///2////2/2////////////2//2//////////2//////////2//2//2////////2////////////////////////2//////2////2///////2//////////////2/////2///////2}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}</1]]          ",
-"        ~~_//}(///////2////////////2///2//////////2//2//2////2/2////2//////////2///2/////2/2/2///2///2///2//2//////2////2/////2//2//////////2////////2////////2//2}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}<2*]]          ",
-"        ~~~/2}|/2//2////2//2/2///////////2/2///2//////////////////2////2/2//2//////////////////////////2/////2//2///////////2////////2/2/2////2//2//////2//2//////2|}}}}}}(}}}}}}}}}}}}}}}}(}}}}}}}|/*]]          ",
-"        ~~~/2}|/////////////////2///2///////2//////2//2///2////2////////////////////2/2///////2///2//////2//////////2////2///////2////////////////2///2////////2///2|}}}}}}}}}}}}}(}}}}}}}}}}(}}}}}|/~]]          ",
-"        ~~)/<}|//2//2//2////2//2///2///2///////2//2/////2///////////2////2//2/2/2//////2/2//2///////2//////2//2///2///2///////2////2///////2///2////////////2////////<}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}/~]]          ",
-"        ~_)/|}|//////////2//////////////2//2///////2//////2//2///2////2///////////2////////////2////////////////////////2//2///////////2////2//////2///2/2///////////2<}}}(}}}}}}}}(}}(}}}}}}}(}}}}}/(]]          ",
-"        ~_|/|}<//2//2//2///2///2/2//2////////2//2/////2////////2/////////2//2/////////////2//2///2///2/2///2//2/2//////////////2////2///2/////////////////////2//2/////2}}}}}}}}}}}}}}}}}}}}}}}}}(}}2(1]          ",
-"        ~_}/}}</////////////2/////////2//2////////////////2///////2//2/////////2//2//2////////////2/////2///////////2////2//2////2///////////2//2///2/////2/2///////////2}}}}}}}}}}}}}}(}}}}}}}}}}}}22]]          ",
-"       ~~_//(}<//2//2//2///////2//2//2/////2//2////2////2////2//////////2//2//////////2//////2//////////////2////2////2//////////////2////2//////2////2////////2//2/2////2}}}}}}}}}}}}}}}}}}}}}}}}}}</]]]         ",
-"       ~~*/2}}<//////////2//2//////////2////////////2//////////2////2///////2//2//2/////2/2/////////2////2////2////2/////2////2///2////2////2///////////////2/////////2////}}}}}(}}}}}}}}}}}}}}}}}}}<2@]]         ",
-"       ~~~/2}}<//2///2/////////2//////////2///2//2///////2///////2///////2//////////////////2/2//2////2////////2///////////2///2//////////////2////2///2//2////////////////2|}}}}}}}}(}}}(}}}}}}}}}}</*]]         ",
-"       ~~~/<}}<///////2////2/////2//2//////2//////////2/////2/////////2//////////////2///////////////////2/2////2//2//2/////////////2///2////////2///2//////2//2/2//2///2////|}}}}}}}}}}}}}}}}}(}}}}|2*]]         ",
-"       ~_3/|}}</2//2/////2//////2/////2////////2///2/////2////2//2//2/////2/2/2/2/2///2/2////2////2////////////////////2//2/////2/////2///2//2////////////////////////2/////2/|}}}}}}}}}}}}}}}}}}}}}|/~]]         ",
-"       ~~)/|}}</////////////2////2/////2////2////////2/////////////////2//////////////////2////2///2//2//////2///2/2/////////2////2//////////////////2//2/////////2//////2/////|}(}}}}(}}}}(}}}}}}}}}/~]]         ",
-"       ~_)/}}}<//2///2////2/////////2///////////2///////2//2////2////2/////2/////////////////2//////////2/2//////////2//2//2////////2////2////2/2//2//////2/2/2/////////////////|}}}}}}}}}}}}}}}(}}}}/[]]         ",
-"       ~_|/}}}<///////2//////2///////////2//2////2//2///////2////2//////////2//2//2/2//2////////////2/////////2////2///////////2///////2///2///////////////////////2//2///2//2///|}}}}}}}}}}}}}}}}}}}/(]]         ",
-"       ~_}/}}(<///2/////2///////2////2/////////////////2///////////2///2////////////////2/2//2//2/////2////2////2/////2//////2///2///////////////2///2/2///////2///////2//////////|}}}}(}}}}}}}}}}}}}/(1.         ",
-"       __|2}|}<////2//////2//////2////2//2///2///2///////2////2//////////2//2//2////2////////////2//////2//////////2///2//2/////////2///////2/2/////////2//2////2//2///////2///2///|}}}}}}(}}}}}(}}}}22]]         ",
-"      ~~_//}}}<///////2/////2//////////////2///////2///2////2////2//2/////////2////////////2///////2////////2//////////////2///2//////2/2/////////2//////////2///////////2////////2/|}}}}}}}}}}}}}}(}221]]        ",
-"      ~_*/2(}}<2///2//////////2///2///2///////2///////////////////////2///2//////2////2/2/////2//////2///2///2/2///2//2/2/////////2////////////2////2///2///////////2/2/////2//2/////|}}}}}}}}}}}}}}}2/]].        ",
-"      ~~_/<|}}<////////2//2/////2///////2///////2//2////2////2////2/////2//////2//2////////2/////2///////////////2////////2///2/////2////2/2//////////////2////2/2////////////////////|}}}(}}}}}}}}}}2/@]]        ",
-"      ~_~/<}}}</2///2//////2///////2////////2///////2////2////2////2////////2///////////2/////2//////2///2/////////////////2////2/////2////////2//2////////2///////////2/////2//2//2///}}}}}}}}}}}}}}22*].        ",
-"      ~~~/<}}(</////////2/////2//////2//2/////2////////2/////////////2///2////2///2/2//////2///////2///////2///2///2/2//2//////////2////////2///////2/2///////2////2////2/2////////////2|}}}}}}}}}}}}</*.]        ",
-"      ~_~/<}|}|//2//2///////////2/////////2//////2///////2//2///2/////////2//////////////////2//2/////2/////2///////////////2///2//////2/2//////2//////2///2///2///////////////2////2////}}(}}}(}}}}}<2*].        ",
-"      ~_)/|}}}|///////2///2///////2////2///////2////2/////////2////2//2//////2//2////2/2/2//////////////2///////2/////2///2///2///////////////2//////////////////2//2///////2////2/////2/2|}}}}}}}}}}</~]]        ",
-"      ~_)/|}|(|/2//////////2//2/////2///////2/////////2//2////////////////2///////////////////2/2//2/////////2/////2//////////////2/2//////2/////2/2////2/////////////2//2//////////2/////2}}}}}}}}}}</~].        ",
-"      __)/|}}}|////2///2////////2///////2/////2/2//2////////2///2///2///2////2///2/2//////2//////////2///2///////2/////2///2///2//////2/2////////////2////2//2//2///////////2//2///////////2}}}}}(}}}</~1.        ",
-"      __[/|}}}(/////2//////2/////////2////2//////////2///2//////2//////////////////////2////2///2/////2///2///2/////2///2///2///////////////2////////////////////2//2///2/////////2/////2///<}}}}}}}}</~]]        ",
-"      ~_(/|}}}}//2//////2/////2///2//////////2///2///////////2///////2///2//2/2/////2////////2////2/////////2/////////////////2//2/2/////2///2/2//2////2///2//////////2///2///2/////2////////<}}}}}}}</[]]        ",
-"      __}/|(}}}2////2///2//////2//////2/2/////2///2//2/2//2//////2///2////////////2////2/2////////////2/////////2///2////2//////////2/2//////////////2///2///2////2/////////////////////2//2//<}}}}}}</(].        ",
-"      ~_}/}}}}}2///////////2//////2///////2////////////////////2/////////2///2/2/////////////2//2///////2/////2///////2////2//2/2///////2//2////2///////////////2////////2/2///2/2///2/////////<}}}}}2/(1]        ",
-"      _*|/}|(}}22////2/////////////2///2////2/////2///2//2//2////////2////2/////////2////2/////////2///////2/////2///////////////////2///////2////2//2//////2//////2//2///////////2/////2////2//|}}}}2/(].        ",
-"      __}/}}}}}<///2////2///2/2//////2////2///2/////////////////2//2//////////2//2/////////2/2//2////2///2/////////2///2////2////2////2//2////2////////2/2////2/////////////2///////2/////2//////|}}}2/(1.        ",
-"      __(/}}}}}|////////////////2/2////////////2///2//2//2///2////////2////2////////2/2///////////////2////2//2/////2////2////2///2///////2//////2//2///////////2//2///2/2////2//2///2////////2///2}<//(]]        ",
-"      ~_//(}}}}|////2/2//2////2//////2/////////////////////2/////2///////2///2//////////2////2/2//2/////////////2//////////////////////2////2//2//////////2//////////2/////2///////////2///2////2//////}]]        ",
-"     ~__//}}}|(}2//////////2///////////2//2/2///2/2////2/////2/////2///////////2/2////////2////////////2///2////////2/2///2///2///2/2//////////////2/2/2////2//2//2/////2////2///2//////2//////////2///21]        ",
-"     __*//}(|}}}////2///2/////2/2///2///////////////2////////////2////2///2//2/////2/2////////2//2//2////////2///2//////////2////////////2///2///2///////2/////////2///////////2////2///////2////2/////2]]]       ",
-"     __*//}}}}|(22///2////2/////////////2////2//////////2/2//2////////2////////////////2///2///////////2//////2////////2//////2//////2////2////////////2////2//2/////2///2///////2///////2////2////2///21].       ",
-"     ___//|}}}}}2///////2//////2//2//2/////2///2///2//2///////////2////////2//2///////////////2//////////2/////////2/////2//////2//////2//////2////2//////2//////2/////2///2/2///////2/////////////////21].       ",
-"     __*//<(}}}}|///2///////2/////////////////////////////2////2////////2////////2//2///2////////2//2/////2/////2///2/////////////2////////2////2///2//2/////2////////////////////2///2////2///2////2///].]       ",
-"     __*//|}}}}}|///////2//////2////2/2//2///2//2///2///2////2////2//2//////2/2//////////2/2/2/2//2///2/////2/////////2///2//2//////2//////////////////////////2///2////2//////2////////2////2////////2/]].       ",
-"     __*//|}}}}}}/2//2/////2/////2////////////////////////2//////////////2///////2//2/2//////////////////////2//2//////2///////2////////2///2///2//////2//2/////2////2//////2/////2////////////2/2/////21.]       ",
-"     __*//|}(|}(|2/////2//////////////2///2////2//2//2///////2///2///2///////2//////////////////2//2//2//2////////2////////2/////2///2////2///2///2/2///////2/////2//////2//////////2////2/////////2///21..       ",
-"     __*//|}}}}}}22//////2//2//2///2////////2////////////2////2///////2//2////2//////////////2/////////////////////2////2/////////2///////////////////////////////////2/////2//2//////2////2////////2///]]]       ",
-"     __*//<}}}}(|<///2////////////////2////////2////2/2////2//////2/////////2///2/2//2/2/2///////2/2//2///2//2/2/////2//////2//2//////2/2///2///2////2//2/2///2////2/////////////2///////////2///2////2/]..       ",
-"     __*//<}}}}|(|////////2/////2/2//////2/2////2/////////////2////2/////2/////////////////2///2///////2/////////////////2/////////2//////////////2/////////////2//////2/2///2////2///2/2/////2////////2]]]       ",
-"     __*//<}}}}}}}2///2/////2////////2/////////////////2///2/////////2///////2/////2///////////////2/////2//////2//2///2/////2////////////2///2///////2////2////////2//////////2////2/////2/////////2//21..       ",
-"     _**//2(}}}}}|</////2////2/////////2/////2///2//2///////2///2/////2///2////2//////2/2///2/////////2////2/2////////////2/////2///2//2///////////2////2////2///2////////2///////////////////2//2/////<]].       ",
-"      **</2|}}}(|(<//2/////////2//2//////2/////////////2//////2////2//////////2//////////2///2//2//2/////////////2///2////////2////////////2///2///////////////2/////2//////2/////2///2////2///////////(]]        ",
-"      _*}/2}}}}}}}|///////2//////////2/////2///2//2///////2////////////2///2/////2/2//////////////////2//2////2///2////2///2/////2///2//2///////2////2////2///////2////2///////2////////2/////2///2////(].        ",
-"      **|//}}}}}}(|2//2/////2//2//2/////////////////2//2//////2//2///2////////2/////2/////////2//2////////2//////////////2/////////2////////2/////2////2////2////////////2///2/////2////////////////2//(1.        ",
-"      _*}//(}}}}|(|<////2//////////2////2/2//2//2//////////2/////////////2////2////////2/2/2///////////2//////2///2////////2//2//////2///2////////////////////2///2/2/////2/////2///2///2//2///2///////[].        ",
-"      **3//||(|}}}}|/////////2///////2//////////////2///2/////2///2///2////2//////////////////////2/2////2/2////////2/2/////////2//////2/////2//2///2///2/2/////2/////2//////////////////////2///2/////~].        ",
-"      **3//||}}}}}|(2//2//2/////2//////////2////2////2////2/////////////////////2/2/2//////2/2//2/////////////2////////////2//////////////2//////2///2/////////////////////2////2///2///2///////////2/2~].        ",
-"      **~//|}}}}(|(|2////////2//////2//2/////2//////////////2/2///2///2//2///2///////2/2/////////////2/2////2///2//////2/////2///2//2/////////2////////////2//2///2////2/////2////////2///2////2//////2*..        ",
-"      **_//<(}}|}||(|//2/////////2//////2/////////2/////2//////////2//////2///2///////////////2///2//////2////////2/2/////////2////////2///2/////2///2//2///////////2///2/////////2/////////2////2////2*].        ",
-"      *@_//2|}}}}}(||2///2///2///////2//////2//2////2////////2///////////////////2//////2/2///////////////2//2/////////2//2///////2//////2//////////////////2///2/////////2///2/////////2//////////2//21..        ",
-"      **@///(|(}}}|(}<////2////2//2//////2/////////////2//2///2/2///2//2///2//2////2////////2//2///2//2/////////2///2//////////2////2///////2////2///2///2///2//////2///////2////2/2/2////////2///////<]..        ",
-"       *@<//}}}}}}}|}|///////////////2//////2//2///2/////////////////////////////////2/////////////////////2/2////2///2/2///2/////////2///////2////////2/////////2////2///////2/////////2//2////2/////(].         ",
-"       **(//|}}}}|(}|(2//////2///2/////2/////////////2////2//2///2//2///2//2//2//2///////2//2//2/2/2//2/2//////2//////////2//////2///////2////////2//////2////2////////2/2/2///2//////2////////////2//3].         ",
-"       *@)//|}}}}}}}}|<//2/////2///2/////2//2//2///////2//////////////2////////////2/2////////////////////////////2/////////2//2///2///2///2///2////2/////////////2//////////////2/2/////2///2///2///2_].         ",
-"       *@_//<}}}|(}|(}(///2/2/////////2///////////2/2/////2///2//2//////////2//2///////2/////////////////2//2//2///2/2/2/2//////////2///////2////////////2/2///2/////2//////2/////////2///2///2////2//*].         ",
-"       @@*//2}(|(|}}}||<//////2//2//2///////2//2////////2///2///////2///2////////2////////2//2////2/2///////////////////////2//2/////////2/////2//2///2//////2////2///2/2/////2////2/////////////////2]..         ",
-"       *@@2//|}|}}|(|(|(///////////////2/2///////////////////////2///////2///2//////2///2//////2///////2/2//2//2/////////2///////2///2/////////////2////////////2/////////2/////2/////2/2/2////2///2/}].          ",
-"        @*}//}}}}}}}}}|}2//2///2//2//////////2//2//2/2/////2//2//////2/////2///2//2//2////2//////////////////////2//2/2/////2//////2///2///2///2//////2//2/2//////2/////////2///////////////2////////3].          ",
-"        @@3//<(}}}|(|(|(|///2//////2/2///2/////////////2/////////2////2/////////////////////2///2//2/2///////////////////2////2/2////////2//2/////2//////////2/2/////2/2/////////2/2///////////2////2_].          ",
-"        @@_//<|}}}}}}|}|(//////////////2///2///2///////////2//2//////////2///2//2/////2///////////////////2/2/2////////////////////2/2/////////2////2//2//////////2//////2///2///////2/2/2///////2//2@..          ",
-"        @@@///(}}}}}|(}}|(////2//2///////////////2//2///2//////////2//////2///////2//////2//2/2/2////2//2///////2/2///2//2/2/////2//////2///2////////////2/2///2///////////////2////////////2///////|]..          ",
-"         @@|//|}}}}(|}|}(|2/////////2///2//2//////////2/////2//2/////2////////2/////2//////////////////////////////2/////////2///////2///////2//2/2/2//////////////2///2/2/2//////2/////2/////2///2/3].           ",
-"         @@3//<(}}}}|(}||(|2///2/////2//////2//2//2/////////////2/////2////2/////2/////2/2////////2//2////2//2////////2////////2////////2/2///////////2/////2////2/////////////2//////////2////2///2_].           ",
-"         @@_//<|}}}}}}}}}|}2/2////2/////2/////////////2//2//2//////2///////////2////2//////2///2///////2///////2////////2/2//////2////////////2/////////2/////2/////2///////2/////2/2///////2//////2@..           ",
-"         1@@2//}|(}}|(}|(|(|//////////////2//2////2//////////2/2////////2//2////2/////////////////2///////2//////2/2////////2//////2/2/////2///////2//////////////////////2////////////2/2/////2///}].            ",
-"          @@(//|}}}}}}}}|}|(<//2///2//2////////2//////2/////////////2/////////////2//2///2//2///////2///////2/////////////////2////////2///////2////2/2/2/2/2//2/2///2/2/////2/2////2////////////2/~..            ",
-"          1@_//<}}}|(}|(|(||(///2//////2//2/2//////2////2/2///2//2////2///2///2///////2////////2///////2//////2/////2/2//2//////2//////////2/2///2/////////////////2/////////////2/////////2//////2@..            ",
-"          1@@//2|(|(|}}}}|}(||//////////////////2////////////////////2//////2////2//2/////2/2///2/2/2/////2/////2//////////2/////2/2/2//2////////////////////2//////////2//2/////////2/2/2///2////}]..            ",
-"           1@(//|}|}}}}|(||(|(<///2//2//////2///////2//2/////2///2/////2//////////////2////////////////2//////////2///2//////2//////////////////////////2///////2////2////////2////2///////////2//~].             ",
-"           1@_//<}}}}(|}}}}||(|2///////2//2///2///2//////2/////2/////////2///2//2////2///2/////////////////2/2//////////2/////////////2//2//2/2/2/2/2/////2///////2/////////////2////////2///////2@].             ",
-"           11@///(}}}}}}|(|(||(|///2///////////////////////2////////2/////2///////2/////////2/2/////2///2//////2//2///////2//2/2//////////////////////2//////2///////2/2/2/2//////////2/////2////|]..             ",
-"            1@)//|}}}}(}}}}|}|}(<//////2////2//2///2/2///2///2///2////2///////2//////2//2/2/////2///////////////////2/2//////////2/2//////2/////////////2/////2/2////////////2///2/2////2//2//2//_].              ",
-"            11_//<|(|}}}}|(|(}||(<//2////2//2/////////////////2////////////2/////2////////////////2//2///2//2/////////////2//////////2/2///////2/2/2//////2/////////////////////////////////////2@..              ",
-"            111<//}|}}}}}}}}|}(|||/////////////2/////2///////////2//2///2//////2/////2///2//2/2///////2///////2/2/2////2//////2////////////2////////2/2//////////2/2//2//2/2/2/2////2///2/////2/)..               ",
-"             11~//<(}|(}}}}}}|}}(|(////2////2/////2///2//2/2//2////////////2/////2////2///////////2//////2/////////////////2////2/2////2/2///2////////////2/2//2///////////////////////////2///2*..               ",
-"             11*//<|}}}}}(|(|}(||(||/////2/////2////////////////2////2////////2//////////2////2////////////2///////2/2//////////////////////////////////////////////2//2////////2/2/2/2/2//////}]..               ",
-"             111(//|}}}}}}|(}||(|}|(<2//////2///2/////2////2/////2////2//2/////////2//////2///2///2/2/2/////////////////2//2/2////2/2////////2//2/2//2/2////2////2///////////2/////////////2///~].                ",
-"              11*//<(|}}}}}}}}}|(|}|(////2////////2////////////////////////2////2////2//////////2///////2///2/2/2///////////////////////2/2/////////////2/////2/////////2/2/////////////2////2<1..                ",
-"              111|//}}}}}}}}|(}||(||((<//////2//////2///2/2//2/2//2///2//////2////////2//2//2/////////////2/////////2/2/2////2/2/////2///////2////2////////////////2/2///////2////////////////3].                 ",
-"               11_//<}}}}(|}}}}(|}}|||(2//2////2////////////////////2////2//////2//2///////////2//2//2//////////2///////////////////////////////////2////2//2//2///////////////2/2/2//2/2//2/2@..                 ",
-"               111|//}}}}}}}}||(|(|(}||(</////////2///2///2///2/////////////2////////////2//2//////////2////2/////2///////2////2/2/2//2/2/2//2/2//////2/////////2/////2/2/2/////////////////2[...                 ",
-"                11_//<}}}}(}}}}}|}}|}(||(2//2//2////////////2///2////2////2//////2///2////////2//2//2////2////2/////2//2//////////////////////////2///////2///////2/////////2///////2///2///2@..                  ",
-"                111|//}}}}}}}}}|(}}}|(}||(<///////2//2//2////////2////2///////2////////2///2////////2/////2///////////////2/2//////2//////2////2///////2/////2/////2//////////2/2///////////3...                  ",
-"                 11_//|}}}}(|}(}|}(|}|}(||(2//2//////////////2//////////2///2////2///2////////2//2////2//////2/2/2///2/////////////////////////////2//////2////2/////2//2/2///////2///2///2/@..                   ",
-"                 111|//}}}}}}|}}}}|(}}||(||(|/////2///2///2///2//2/2///////////////////2//2//////2////2//2/////////////2////2/2/2////2/2////2//2/////2/2////2////2/////////////////////2///3...                   ",
-"                  11_//<}}}(|(|}}}}}}}(||(||(<2///////////////////////2///2///2//2///////////2//////////////2////2//2///2////////2///////2///////2////////2////2///2//2////2///2///2/////22@..                    ",
-"                  111(//|}}}}}|(}}}}}|(}|(||(|(<//2//2///2/////2///////2////////////2////2/////////2//2//2///2/////////////2///////2//////2//2/////2///2///2////////////2/////////////////~...                    ",
-"                   11*//<}}}}}}|}}(|}}|}}|}}||}|<//////////2/////2/2//////2///2//2////2//////2//2//////////////2//2//2///2///2///////2/////////2/////2///////2/2///2//2////2/2/2/2//2/2//<1..                     ",
-"                   111)//|}|(|(}}}}}}}}|(|(|(|(}(}/2///2//////2////////////2//////////////2///////2///2//2//2/////////2////////2/2////2/2//2///2//2/////2///////2///////////////////////2_].                      ",
-"                    11@<//}}}}}}}}}(}}}}}}}}|}|||(|<//////2/////2//2//2/////////2//2///2//////2///////////////2///2//////2///2/////2//////////////////2////2///////2//2/2/////////2///2/(1..                      ",
-"                    111~2/<}}}}}}}}}}}}}}|(|(|(}|(|(}/2////2////////////2////2//////2/////2////2///2///2//2///2///2//2////2///2//////2///2//2///2//2////////////2////////2/////2///////2*..                       ",
-"                     111|//|}}(|}}}}}(}}}}}}}}|}}|||(|</////////2///2/////2//////////////////////////2//////////////////2///////2//////2//////2////////2////2///////2//////2//////////23]..                       ",
-"                      11@2/2}}}}}}}}|}|(}}}}|(|(|(}}|(|(<////2///2///2////////2//2///2//2///2////2////////2//2///2///2//////2///2//2//////2////////2////2///2///2////2//2//////2/2/2//<1..                        ",
-"                      111[//<}}(|(|(|(||}}}}}}}}}|}}(|}|}|</////////////2//2//////////////2////2///////2///////////2//////2//////////2//////2///2//////////////////////////2/////////2*..                         ",
-"                       111|//|}}}}}}}|(|(|(}}}}|(}}}|(|(}|(|<//2//2//2/////////2///2//2//////////2//2/////2///2///////2/////2////2//////2////////////2///2///2//2//2///2/////////////)]..                         ",
-"                        11@///}}}}}}}}}}}}|}}}}}}}}}}}}}}}|}}|2///////////2//2///////////2//2////////////////2///2//////2//////2//////2/////2///2//2/////////////////2///2/2/2//2/22<1..                          ",
-"                        111~//2}}}}}}}}}|(}|(}}}}|(}}}}|(|(}}|(|22//2//2////////2//2/////////2///2///2//2//////////2//////////////2/////2////2/////////2///2////2//////////////////2*]..                          ",
-"                         111(//<}}}}}}}}}}}}}}}}}}}}}(|}}}|}}}}}(|<2///////2/////////2////2////////2//////2////2//////2//2//2///2///////////////2///2////2////2////2//2///////////23]..                           ",
-"                          11@<//|}}(}}}}}}}}}|(}}}}|}}}}|(|(}}}|}}|(|<22////2///2/////2///////2////////////2///////2//////////////2//2////2//////2/////////////////////2//2/2/2///(1..                            ",
-"                          111_///|}}}}}}(|}(|(|}}}}}}}}}}}}}}}(|(|(|}}||</////////2////////2/////2///2//2//////2////////2///2//////////2////2///////2//2///2///2////2////////////|@].                             ",
-"                           ]11~2//}}}}}}}}}}|}}|(|(}|(}}}}}}}}}}}}|(|(}}((|<<2/////2////2/////////2////////2////2///2////2////2///2//////////2///2//////////2////2/////2//////2/2_]..                             ",
-"                            ]11(//2}}}}}}}}}}}(|}}}}}|}}}}}(|}}}}}}|}}}}|}}}}||<2/////2////2//2///////2//////////////////////2//////2///2////////////2//2////////////2////2////23]..                              ",
-"                             111(///(}}}}}}}}}}}}}}|(|(}}}|}}}}}}}}}}}}}}}|(|(}}}(|<</////////////2/////2////2////2//2///2/////2/////////2///2////2///////////2///2////////////(]..                               ",
-"                              11*<//<}}}(}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|}(|(}||<22///2//////////2////2/////////////////2///2/////////2///////2//2//2////////2//2///2|1..                                ",
-"                              ]11@///<}}|(}}}}}}}|}}}}|(|(|(}}}}(|(|(}|(}}}}}}}}}}|}|}}}}}}}(}||<<222/2///////////2///2//2//2/////////2///2/////////2//////////2///2///////2/<@]..                                ",
-"                               ]11_///<}}}}}}(}}}}}}}}}}}}}}}}}}|}}}}}}|(|}}}}}(|}(|(|}}}}}}|}}}}}}}(|}}}||<22//////2/////////2///2/////////2///2///////2////////2////2////22*...                                 ",
-"                                ]11_///2}}}}}|(}}}}}}}}}}}}|(}}(}}}}|(}}}}}}}}}}}}}}|(}|(}}}}}}|(}}|}}}}}}}}|(}|<2///////2/////////2////2////////2//2////2//2/////////2////2_...                                  ",
-"                                 ]113///2}}}}}}}}}}(}}}}}}}}}|}}}}}}}}}}}(|(|}}}}}}}}}}}}}}}}}}}|}(|(|(|}(|(|}}}}}}|2//2////2//2//////2/////2/////////////////2////2//////2_]..                                   ",
-"                                  ]113///2}}}}}}}}}}}}}}|(}}}}}}}}}}}}}}}}}}}|(}}}}}}}}}}}}(|(|(}}}}}}}}|}|}}}}}}}}}}}<2////////2///////2////2///2///2///2////////////2//23]..                                    ",
-"                                   ]11[///2|}(}}}}}}}}(}}}}}}(}}}}(}}}}}}}}}(|}}}}(}}}(|(|}|}}}}|}}}}}}}(|}(|(|(|}}(|}}}|2/////////2///////////2///////////2//2//2//////231..                                     ",
-"                                    ]113////<}}(}}}}}}}}}}}}}}}}}}}|(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(|22///2////2////2////////2//2/////////////2///3]..                                      ",
-"                                     ]11[////|}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}(|(|}}}}}|}}<//////////2////2////2//////2////2///2///2231..                                       ",
-"                                      .11[2///2}}}}}}}}(}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|}}|(|(|(}|(}}(</2//2/////////2////////////2///////2///3]..                                        ",
-"                                       ]]1_////2|}}}}}}}}}(}}}(}}}}}}(}}}}}(}}}}(}}}(}}}}}}}(}}}}}}(}}}(}}}}}}}}}}}}}}}}}}|}}}}<//////2//2///////2//2/////////2/////<~]..                                         ",
-"                                        ]11_2////<}}}}}}}}}}}}}}}(}}}}}}}}|}(}}}}}}}}|(}}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}}}|(}}}}|(}/2///////////2/////2//2///2///////2_]..                                          ",
-"                                         ]]1@2////<}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(|}}}}}}}}|/////2//2//2////2//////2////2//2<*]..                                           ",
-"                                          ]11@}2////<}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}|(}}}}}}}}}(/2///////////////2////////////<@]..                                            ",
-"                                           ]]11(/////2|}}}(}}}}}}}}}(}}}(}}}}}(}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}(|}}}}}}}}}}}(|}}}(|}|///2//2//2/2//////2////2//2/(11..                                             ",
-"                                            ]]11~/2////<}}|(}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}|///////////2//////2///////31...                                              ",
-"                                              ]]1*</////2<}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}}}(|}}}}(}}}}}}}}}}}}}}}}(|(|}}}}(|///2/////2///2////////2/<_1...                                               ",
-"                                               ]]11(/2////2}}}}}}}}}(}}}}}}}}}}(}}}}(}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}|}(|//2//2////////2//2///2|@...                                                 ",
-"                                                .]11~///////<|}}(}}}}}}}}}}}}(|}}}}}}}}}}}}(}}}}}}}}}}}(}}}}}(}}}}}}}}}(}}}}}}(|}}}}}}//////////2//2/////2/311..                                                  ",
-"                                                 ].]1@}2//////2|}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}|}}}}}}}|(}}}}}(<//2///2///////2///<_1...                                                   ",
-"                                                   ]]11~2///////<}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}(}}}}}}}}}(|}}}}}}}}}}(}}}}(|}}}}}}}}}</////////2/////22)@]..                                                     ",
-"                                                    ].]1@(/2//////2|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}|(}}}|(|//2//2/////2///<_]...                                                      ",
-"                                                      ]]]1_<2///////2<}}(}}}}}}}}}}}}}(}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|////////////22)1]...                                                       ",
-"                                                       ]]]11~/2////////2|}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}(}}(}}|(}|(|////2///2///(@]...                                                         ",
-"                                                         ]]]1@3/2////////2<|}}}(}}}}}}}}}}}}(}}}}}}}}}(}}}}}}}}}}}(}}}(}}}}}}}|}}}}}}}2/2////2//2|_1]]..                                                          ",
-"                                                           ]]]1@[2//2///////<<|}}}}(}}|(}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|(}}}}}}/////////|~1]...                                                            ",
-"                                                            ].]]1@3/2//////////<<}}|}}}}}}}}}}(|}}}}}}}}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}</2///2/|_11...                                                              ",
-"                                                              .]]]1@[<2//2//2/////2<|}}}}}}}}}}}}}(}}}}}(}}}}}}}}}(}}}}(}}}}}}}}}}}}|///2//(~1]...                                                                ",
-"                                                                ..]]11_|////////////2/<<|}}}}}}}}}}}}}(|}}}}}}}}}}}}}}}}}}}}}}(|(|(2////2(_11...                                                                  ",
-"                                                                  .]]1]1*32/2/////////////2<|}}}}}}}}}}}}}|(}}}}}}}}}}}}}}}}}}}}}|///2|3@]....                                                                    ",
-"                                                                     ...]11_)22/2//////2/////22<<|}}}}}}}}}}}}(}}}}(}}}}(}}}}}}<2/22)*@1]]..                                                                      ",
-"                                                                       ...]]11_)/2/2////////////////2<<|}}}}}}}}}}}}}}}}}}}|<<//2[_11.....                                                                        ",
-"                                                                          ..]]]]1*3(2/2/2/////////2////////222<<<<<<<<222///2|3*1]]....                                                                           ",
-"                                                                             ....]111@~(<2/2///2////////2///////////////2)~_1]].....                                                                              ",
-"                                                                                ....]]]1]1@_3)(2222/2/////////2222<)[_*@]]].]....                                                                                 ",
-"                                                                                    ....]]]]1]111@@**_~_~~_~_*@*11]]]].......                                                                                     ",
-"                                                                                        .........]]]]]]]]]]]]]]].........                                                                                         ",
-"                                                                                               ....................                                                                                               ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  "};
diff --git a/perl-install/pixmaps/mouse_3b_mini.xpm b/perl-install/pixmaps/mouse_3b_mini.xpm
deleted file mode 100644
index d7ecefe60..000000000
--- a/perl-install/pixmaps/mouse_3b_mini.xpm
+++ /dev/null
@@ -1,211 +0,0 @@
-/* XPM */
-static char * mouse_3b_mini_xpm[] = {
-"105 175 33 1",
-" 	c None",
-".	c #0C1834",
-"+	c #FE9A02",
-"@	c #303C5D",
-"#	c #AB8128",
-"$	c #E7A418",
-"%	c #DAA22A",
-"&	c #95742E",
-"*	c #E6A929",
-"=	c #747C98",
-"-	c #62543B",
-";	c #F7B01E",
-">	c #FEA005",
-",	c #B7944C",
-"'	c #ACAECB",
-")	c #816834",
-"!	c #7C85A3",
-"~	c #AFB2CF",
-"{	c #A28C5E",
-"]	c #5F6A8B",
-"^	c #E2A62E",
-"/	c #14254C",
-"(	c #424E6E",
-"_	c #FEB212",
-":	c #BABEDA",
-"<	c #6B7491",
-"[	c #848BA9",
-"}	c #9A9ABE",
-"|	c #D6A236",
-"1	c #A6A8C7",
-"2	c #9FA0C0",
-"3	c #515D7F",
-"4	c #CB9420",
-"                                                ]]}3.                                                    ",
-"                                                3]}(.                                                    ",
-"                                                ]<}@.                                                    ",
-"                                                3=}@.                                                    ",
-"                                                3=}/                                                     ",
-"                                                3!}/                                                     ",
-"                                                3!}.                                                     ",
-"                                                (!}.                                                     ",
-"                                                3[}.                                                     ",
-"                                                ([}.                                                     ",
-"                                                (}}.                                                     ",
-"                                                (!}.                                                     ",
-"                                                (!}.                                                     ",
-"                                                (!}/                                                     ",
-"                                                (=}/                                                     ",
-"                                                (=}@                                                     ",
-"                                                ]<}@.                                                    ",
-"                                                ==}<@@                                                   ",
-"                                               !!}}}!@/                                                  ",
-"                                               3}}}}}[/                                                  ",
-"                                               (}}}}}}/                                                  ",
-"                                               @}}}}}}(.                                                 ",
-"                                               ([}}}}}3.                                                 ",
-"                                               (!}}}}}<.                                                 ",
-"                                               3!}}}}}!/                                                 ",
-"                                               ](@@@@@@/(                                                ",
-"                                           '2}[]3<]==<]3]]===                                            ",
-"                                         2}[2'::~'~1111'':1}=]]]                                         ",
-"                                      ~2[=(:22}}}}}}}}}}}}2:[/3(]3                                       ",
-"                                     2[,_$/}1}}}}}}}}}}}}}}2(@_%-(33                                     ",
-"                                   '[,;___(]'}}}}}}}}}}}}}}}/)___4(((                                    ",
-"                                  2[^_;>__)@:}}}}}}}}}[}}}}!/#_____&@((                                  ",
-"                                ~}{_>+++__#/:1}}}}}}}}}}}}}</$______4@@@                                 ",
-"                               '[,;>+++>__4/~~}}}}}}}}}}}}2]/________;-@@                                ",
-"                              1!%>+++++___*/}:2}}[}}}}}}}}13@_________;)@@                               ",
-"                             2!*>+++++_____/[:'}}}}}}}}}}}1@-_________;;)/@                              ",
-"                            1!$++++++______@=::}}}}}}}[}}}~@-____________)//                             ",
-"                           2!%++++++_______(]::'}}}}}}}}}}:/&_____________)@/                            ",
-"                          1!%>+++++>_______-3:~:}}}}}}}}}}:/)______________-//                           ",
-"                          [,>+++++_________-3:::2}[}}}}}}}1/#_______________(//                          ",
-"                         }{>+++++>_________)3:::~2}}}}}}[21/#_______________$@//                         ",
-"                        }=_+++++;__________)(~:::2}}}}}}}}1/4________________4//                         ",
-"                       2!$+++++>___________)(:~::~}}}}}}}2}/4_________________&//                        ",
-"                       [4>++++_____________&(:::::2}[}}}}2[/4__________________(//                       ",
-"                      }{;++++>_____________#@~::~:~2}}}}}2}/%__________________$//                       ",
-"                     }=*++++_______________&@::::::2}}}}}}}/*________________>__&//                      ",
-"                     !4>+++>_______________#@~:::::~}}}}}}[/$_________________>__(/.                     ",
-"                    [!_+++>________________&@:~:~:::2}}[}2!/*__________________>_%//                     ",
-"                    =*>++>_________________#@:::::::~}}}}}!/%__________________>>_)/.                    ",
-"                   [{_++>__________________&@~:::~:::'}}}}!/*__________________;+;;//                    ",
-"                  }<;++>___________________#@::~::::::2}}}!/*___________________++_&//                   ",
-"                  !,;+>____________________&@::::~:::~:}}1[/*___________________>+>;@/                   ",
-"                 [=_+>_____________________&@~:::::::::~1~}/$___________________>>+;&//                  ",
-"                 !,;>______________________)(::::~:::~::::}/|___________________;+++_@/                  ",
-"                [=_>;______________________)(:~:::::::::::}/4____________________+++>#./                 ",
-"                [{_>_______________________-(::::~::~:::~:1/,___________________>++++;@.                 ",
-"                <__________________________]3::~::::::::::~/#____________________++++>&//                ",
-"               !#__________________________(]:::::::~:~::::/#___________________>+++++;/.                ",
-"               <|;_________________________@]::::~:::::~:::@)___________________>+++++>-/.               ",
-"              [(4__________________________@!:~:::~:~::::::@)__________________;++++++>-//               ",
-"              =@)__________________________.[:::::::::::~::((__________________>++++++>///               ",
-"             !<<@_________________________%/}:::~::::~:::::](_________________>+++++++#/@3.              ",
-"             ![~/)________________________,/':~:::::::~::::</_________________+++++++$//[2/              ",
-"             <~:[/,_______________________&/::::~:~::::::::[/________________+++++++>(/3::@.             ",
-"            !<:::</#______________________)@::::::::~::~:::1/,______________++++++>$@/3~2:</             ",
-"            =}::::!/3_____________________(3:~::::~:::::::::/{____________++++++>_#//]'}}1'.             ",
-"            ]~:::::2(/)___________________@<:::~:::::~:~:~::@)___________>++++>_#(/@[12}}}:(.            ",
-"           !=::~:::::!@@]|_______________%/}:~::::~:::::::::3(________>++>>>_$&@//=~2}}}}}~=/            ",
-"           =}:::::~::::!(/@],*___________#/~:::::::::::~::::</________>__;4)@//([~2}}}}}}}1'/            ",
-"           ]~::~::~::::::'=3/@@3&,*______-(::~:~::~:~:::::::'/,_____$4&)@///(=''2}}}}}}}}}2:@.           ",
-"          ==::::::::~::::::::2=3(///@(-)&/3}}1111::::::~121}[@(&)-@////@3=2::1}}}}}}}}}}}}}~=/           ",
-"          =[::::::::::~:::~:::::::~[!<3(@@/////////////////////@(3]=[2::~'1}}}}}}}}}}}[}}}}11.           ",
-"          ]~:~:~::~::~:::~::::~:::~''~~:::::~1112[}[[}[}111~::::~:::~'122}}}}}}}}}}}}}}}}}}2:@.          ",
-"         =<::::::::::::::::~::::::::~1}}2221'~~~:~:::::::~:~~~''112}}}}}}}}}}}}}}}}}}}}}}}}}~].          ",
-"         =[:::::~::~:::~:::::~::~::::::12}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}[}}}}}}[}}}}'[/          ",
-"         ]1~:~:::::~::::~::::::::::::::::~2}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}1~/          ",
-"         ]::::::~:::::~::::~::~:~:~:~:~::::~1}}}}}}}}}}[2}}}}[}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}:(.         ",
-"        ==::::::::::::::~::::::::::::::::::::~1}}}}}}}}}}}}}}}}}}}}}}}[}}}}}}[}}}}[}}}}}}}}}}'<.         ",
-"        <[:~::::::~:::~::::~::::~::::::~:~:::::~12[}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}}}}}}[}}}}}1}.         ",
-"        <1:::~:~::::::::~::::~::::~:~:::::::::::::'}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}2:/         ",
-"        ]::::::::~:~:::::::::::::::::~::::~::::::::~'2}}}}}}}}}}}[}}}}}[}}}}}[}}}}[}}}}}}}}}}}:(.        ",
-"       <=::::~:::::::~:::~::::~:::::::::::::~:~:::::::'}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}}[}}}}'].        ",
-"       <[:~::::~:::::::::::~:::~:~:~::~:~::::::~::::~::~'}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}1[/        ",
-"       ]1::~:::~::~:~:::::::::::::::::::::~::::::~::::::~:1}}}}}}}}[}}}}}[}}}}}}[}}}}}}}}}[}}}2~.        ",
-"       ]::::::::::::::~:~::~:~::::::~:~::::::~::::~::::::::~2}}}}}}}}}[}}}}}[}}}}}}[}}}}}}}}}}}:@        ",
-"      <]:::::::~:::~:::::::::::~::~::::::::~:::~::::~::::::::'}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}'3.       ",
-"      <!~::::::::~::::::~:::::::::::::~:~::::::::::::~:~::::::~1}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}1=.       ",
-"      <[::~:~:::::::::~:::::~:::~:~::::::::~::::~:::::::~:~:::::~2}{}}}}[}}}}}}}[}}}}[}}}}}}}}}2}.       ",
-"      ]1:::::::::::~::::~::::~::::::~:::~:::~::::~:~::::::::~:::::~2}}}}}}}}[}}}}}}}}}}}}}}[}}}}~/       ",
-"      ]:::~:~:~:~:::::::::~:::::::~:::~:::::::~::::::~:::~::::::::~:2}}}}}}}}}}}}}}}}}}}}}}}}}}}~@       ",
-"      ]:~::::::::~::~:~::::~:~::::::::::::~::::~:::::::::::~::~:~::::~}}}}}}}}}}[}}}}[}}}}}}}}}}'(.      ",
-"     ]!:~:::::::::::::::~::::::~::~:::~:~:::~:::::~::~::~::::::::::::::2}}}}}}}}}}}}}}}}}}}}}}}}1].      ",
-"     ][~~:~:~:~:::~::::::::::::::::~::::::::::::::::::::::~::~::::~:::::'}}}}}}}}}}}}}}}}}}[}}}}2[.      ",
-"     ]2':::::::::::::~:::~:::~:~::::::::~:::::~:~::~:::~::::::::::::~::::~}}}[}}}[}}}}[}}}}}}}}}}2.      ",
-"     ]~1:::::~:~:::~::~:::~::::::~::~::::~:~:::::::::~:::~::~::~::~:::~::::'}}}}}}}}}}}}}}}}}}}}}~/      ",
-"     3:2~:~::::::~::::::::::::::::::::::::::::::~:~:::::::::::::::::::::::::~}}}}}}}}}}}}}}}}}}}}'@      ",
-"     <:1::::::::::::~:~:~:~::~:~::~:~::~:::~:~:::::::::~::~::~:::::~::~::~::::2}}}[}}}}[}}}}[}}}}1(.     ",
-"    ]<'1::~:~::~:~:::::::::::::::::::::::::::::::~::~:::::::::~:~::::::::::~:::2}}}}}}}}}}}}}}}}}13.     ",
-"    ][11::::::::::::::::::~::~::~:::~:::~:::::::::::::~::~:::::::::~::~::::::~::'}}}[}}}}}}}}}}}}2<.     ",
-"    ][1':::::~::::~::::~::::::::::::::~::~:~:~:~:~:~::::::~:~::::::::::::~:::::::~}}}}}}[}}}}}}}}}[.     ",
-"    ]22'::~::::~:::~::::~:~:::~::~:::::::::::::::::::~::::::::~:~::::~:~::::~::~::~2}}}}}}}}}[}}}}}.     ",
-"    3'}~~:::~::::::::~::::::::::::::~:~::::~:~::~::::::~::::~:::::~:::::~::::::::::~}}}}}}}}}}}}}}'.     ",
-"    3:}~::::::::~:::::::::~:~::~:~::::::~:::::::::~::::::~::::~:::::::::::~::~::~::::2}}}[}}}}}}}}~/     ",
-"    ]~}~::~::~:::~:~::~::::::::::::::::::::::~:~:::~::~:::::~:::~::~::::::::::::::::::2}}}}}}}}}}}~/     ",
-"    ]~}~::::~:::::::::::~::::~:::~:::~::::::::::::::::::~:::::::::::~::~::::~::::~::~::1}}}}}}}[}}~(     ",
-"   ]<1}~~:::::~::::~::~::::~:::::::~::~:~:~::::~:::::~:::::~:::::~:::::::~::::~:::::::~:2}}}}}}}}}1(.    ",
-"   ]=1}~::~:::::~::::::::~::::~:::::::::::::~::::~:~:::~::::~:~::::::~:::::::::::~:::::::2}}}}}}}}13.    ",
-"   3!1}~::::::~::::~::~::::::::~:~:~::~:::~:::~:::::::::::~:::::::~:::~:::~:::~::::~:::~::2}}}}}}}1].    ",
-"   ][1}~:~:~:::::::::::~::~:~::::::::::~::::::::::::~:~:::::~::~:::::::~:::~:::::::::~:::::2}}}}}}2=.    ",
-"   3[}}'::::::~:~::~:::::::::::::::~::::::~::~:~:~:::::~::~::::::~:~::::::::::::~:::::::~:~:2}}}}}1=.    ",
-"   312}':::~:::::::::~::~::::~:~:::::~:::::::::::::::::::::::~:::::::::~:~::~:~:::~:::~::::::}}}}}2}.    ",
-"   3}}}'~:::::::~:::::::::~::::::::::::~::~:~::::~:~:::::~:::::::~::~::::::::::::::~::::::~:~:}}}}1[.    ",
-"   31}}1::~::~:::~:~::~::::::::~:~:~:::::::::::~:::::~:~::~:~:~::::::~::~:~::~::~:::::::~:::::~}}}22.    ",
-"   (~}}2:::::::::::::::::::~:~:::::::::~::::~:::::~:::::::::::::::~::::::::::::::::~:~:::::::::~}}11.    ",
-"   3'}}2::~::~:~::::~::~:~:::::::~::~::::~::::::::::~::::~:::~:~:::~:::::~::~::::~::::::::~:::::~2'1.    ",
-"   3~}}}::::::::::~::::::::::::~:::::::~:::~::~::~::::~:::::::::::::::~:::::::~::::::~:~::::~::::::~.    ",
-"   (:}}}~:~:::::~::::~:::~::~:::::~:::::::::::::::::::::~:~:::~:~::~::::::~::::::::~:::::~::::~::~::.    ",
-"   (:}}}~:::~:~:::~::::~::::::::::::~::~::~::~::~:~::~::::::::::::::::~:~::~::~:~:::::~::::~::::::::.    ",
-"   (:}}}':::::::::::::::::~::~:~:::::::::::::::::::::::~::~:~::~:~:~:::::::::::::::::::::::::~:::::~/    ",
-"   (:}}}2:~:::~:::~:~::~:::::::::~::~::~::~::~:::~::~::::::::::::::::~::~::::~::~::~:::~::~::::~:~::.    ",
-"   (:1}}}::::::~::::::::~::~:::::::::::::::::::~::::::~:::~::~::::::::::::~::::::::::~::::::~::::::~.    ",
-"   (:2}}}~:~::::::~::~:::::::~:~:~::~::~:~::~::::::~:::~:::::::~:~::~::~::::~::~::~::::::~::::::~:::.    ",
-"   ('1}}}~:::~:::::::::~:~:::::::::::::::::::::::~:::::::~::::::::::::::::::::::::::~::~:::~::::::~1.    ",
-"   (11}}}2:~:::~:~::~::::::::::::~::~::~:~::~:~:::::~:::::::~:::~::~::~:~::~::~::~::::::::::~::~:::2.    ",
-"   (}~}}}}::::::::::::::~:~:~:::::::::::::::::::::::::~:~:::::~::::::::::::::::::::~::::~::::::::::[.    ",
-"   @[~}}}}~~::~:::~::~::::::::~::~::~::::~::::~:~::~:::::::~::::~::~:::~::~::~::~::::~::::::~::~:::=.    ",
-"   (!~}}}}1:::::~:::::::::~:::::::::::~::::~:::::::::~:::~:::::::::::~::::::::::::~::::~::~::::::~:].    ",
-"   @]:2[}}}::~::::~::~:~::::::~::~::~::~:::::::~::~:::~::::::~::::~::::::~::~::~::::::::::::::~::::(.    ",
-"   @3:}}}}}1:::~::::~:::::~:::::::::::::::~::~::::::::::~::~:::~:::::::~:::::::::~::~:~:::::~:::::~@     ",
-"    @:1}}}}2:::::~::::::~:::~:~::~::~::~:::::::~:::~::::::::::::::~:~::::::~::~::::::::~:~:::::~::~.     ",
-"    @2~}}}}}~~::::::~::::::::::::::::::::~:::::::~:::~:~::::~:~::::::::::~::::::~::~:::::::::::::~[.     ",
-"    /!:}[}}}2:~::~::::~:~:~:::~::~:::~:::::~:::::::::::::~:::::::~::~:~::::::~:::::::::::~:~::~:::].     ",
-"    @3:}}}}}}~:::::~::::::::::::::::::::~::::~:~::~::::::::::::~:::::::::::~:::~::~::~::::::::::::@.     ",
-"     @:1}}}}}2:~::::~::::::~::~::~:~:~:::::::::::::~:~::~:~:~::::::~::~:~:::::::::::::~:::~::~:~:~.      ",
-"     /}~}}}}}}1:::::::~:~::::::::::::::~::~:::~::::::::::::::::::~::::::::::~:::~::~::::~::::::::!.      ",
-"     /]~}}}}}}2~~::~:::::::~::~::~::~::::::~::::~:::~::~::::~:~::::~:::~:~:::~::::::::::::~::::~:(.      ",
-"      @:1}[}}}}2:::::~::~:::::::::::::::~:::::::::~::::::~:::::::::::~:::::::::~::::~:::::::~:::'/       ",
-"      /[~}}}}}}}~~:::::::::~::~::~:~:~::::::~::~::::::~::::~:::~:::::::::~::~::::~::::~:::::::::=.       ",
-"      /3:}}}}}}}}~::~::::::::::::::::::~::~:::::::::~::::::::~:::~:~:::~::::::~::::~::::~:~::~:~@.       ",
-"       /~1}}[}}}}}~::::~:~:~::~:::~:::::::::~::~:~:::::~::~:::::::::~::::::~:::::::::::::::::::2.        ",
-"       /<:}}}}}}}}2~:~:::::::::::::~::~:::::::::::::::::::::~::~:::::::::~:::~::~:~::~:::~::~::3.        ",
-"        /~1}2[}}}}}}:::::::~::~:~:::::::~::~::~::~:~::~::~::::::~:::~:~:::::::::::::::~:::::::1.         ",
-"        /=~}}}}}}}}}}~::::::::::::~:~::::::::::::::::::::::~::::::~::::::::~::~::::~::::~::~::3.         ",
-"        /@~1}}}}}}}}}}~:~::~::~:::::::::~::~::~:::~::~::~:::~:::::::::~:~:::::::~::::::::::::1.          ",
-"         /<:}}[}}}}}}}}~:::::::~::~::~::::::::::~:::::::::::::~:~:::~:::::~::~::::~::~:~::~::3.          ",
-"          /1'}}}}[}}}}}}1~:~::::::::::::::~::~::::~::~::~::::::::~:::::~::::::::::::::::::::}.           ",
-"          /3:}}}}}}}}}}}}2~::::~:~::~::~::::::::::::::::::~:~::::::::::::~::~::~:~::~:::~::~@.           ",
-"           /[~}}}}}[}}}}}}}1~~:::::::::::~::~::~::::~::~:::::~:::::~::~::::::::::::::~:::::!.            ",
-"           /@~1}}}}}}}}}}}}}21:~:::~:::::::::::::~:::::::~:::::~:~::::::~::~::~:::~::::~::1/.            ",
-"            /3:}}}}}}}[}}}}}}}}'~::::~::~::~::~::::~::~::::::::::::::~:::::::::~:::::::::~(.             ",
-"             /[:}}}}}}}}}}}}}}}}}2':~:::::::::::~:::::::~::~::~:::~::::~::~:::::::::~::::<.              ",
-"             //1~}}}}}}}}}}}}}}}}}}}1':~::~::~:::::::~:::::::::~:::::::::::~:::~:~::::~:}..              ",
-"              /@~'}}}}}[}}}}}}}}}}}}}}}21~~::::~::~::::~::~::::::~::~:~::::::~:::::::::'@.               ",
-"               /(:1}}}}}}}}}}}}}}}}}}}}}}}}}211~~~:::::::::~:::::::::::~::~::::::~:~::~@.                ",
-"                /3:1}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}22'~::::~:~::~:::::::::::~::::::~3.                 ",
-"                 /]:'}}}}}}[}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}1~:::::::~:::~:::~::::::::~].                  ",
-"                  /<:'}}}}}}}}}}}[}}[}}}}}}}}}}}}}}[}}}}}}}}2~:~:::::~:::~:::~:~:~::].                   ",
-"                   /<:~}}}}}}}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}}}2:::~::::::::::::::::].                    ",
-"                    .3::1}}}}}}}}}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}~::::~::~:~:::::~:3.                     ",
-"                     /(~:'}}}}}}}}}}}}}}}}}}}}}}}}}}}}}[}}}}}}}}}~~::::::::~:~::~(.                      ",
-"                      .@2:~1}[}}}}}[}}}}}}}}}}}}}}}}}}}}}}[}}}}}}}:~::~::::::::1@.                       ",
-"                       ./!::~2}[}}}}}[}}}}}}}}}[}}}}}}}}}}}}}}}}}}2::::~::~:::[/.                        ",
-"                        ./3~::~2}}}}}}}}}}}}}}}}}}}[}}}}}}}}}[}}}}}~::::::::~]..                         ",
-"                          //[:::'2}}}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}~~::~:~:}@.                           ",
-"                           ./(1:::~1}}}}}}}}}}}}}}}}}}}[}}}}}}}}}}}~:::::'3..                            ",
-"                             ./31:::~1}}}}}}}}}[}}}}}}}}}}}}}}}}}}}~~::~=/.                              ",
-"                               ./32::::~12}}[}}}}}}}}}}}}}}[}}}}}}1::~</..                               ",
-"                                 ./([::::~:~'2}}}}[}}}}}}}}}}[}}}':2]/..                                 ",
-"                                   ../3}::::::~~'122}}}}}}}}}2211<@..                                    ",
-"                                      ../(<}~::::::~:~~'~~~~1!]@...                                      ",
-"                                         ....@(3<=[[[[[<]3@/....                                         ",
-"                                              .............                                              ",
-"                                                                                                         ",
-"                                                                                                         ",
-"                                                                                                         "};
diff --git a/perl-install/pixmaps/mouse_left.xpm b/perl-install/pixmaps/mouse_left.xpm
deleted file mode 100644
index 13fce0362..000000000
--- a/perl-install/pixmaps/mouse_left.xpm
+++ /dev/null
@@ -1,142 +0,0 @@
-/* XPM */
-static char * mouse_left_xpm[] = {
-"59 91 48 1",
-" 	c None",
-".	c #AFB0CD",
-"+	c #A7A9C8",
-"@	c #9FA1C0",
-"#	c #9A9ABE",
-"$	c #848CAA",
-"%	c #697392",
-"&	c #7B84A1",
-"*	c #122450",
-"=	c #757C94",
-"-	c #BABEDA",
-";	c #4D283C",
-">	c #B52E19",
-",	c #5C2937",
-"'	c #C42F14",
-")	c #FF3300",
-"!	c #D3300F",
-"~	c #302646",
-"{	c #4A5778",
-"]	c #7A2B2D",
-"^	c #21254B",
-"/	c #892C28",
-"(	c #E1310A",
-"_	c #FF4000",
-":	c #FF6000",
-"<	c #FF7300",
-"[	c #FF7900",
-"}	c #972C23",
-"|	c #FF5900",
-"1	c #FF8000",
-"2	c #FF9900",
-"3	c #FF4D00",
-"4	c #3E2741",
-"5	c #FF8C00",
-"6	c #FF9300",
-"7	c #3E4862",
-"8	c #6B2A32",
-"9	c #F03205",
-"0	c #FF5300",
-"a	c #FF3900",
-"b	c #FF4600",
-"c	c #FF8600",
-"d	c #FF6600",
-"e	c #5C6888",
-"f	c #FF6C00",
-"g	c #A62D1E",
-"h	c #11244D",
-"i	c #253359",
-"                                                         .+",
-"                                                      .++@@",
-"                                                    .++#$%&",
-"                                                 .***$=$@--",
-"                                               .******&---.",
-"                                             .****;>,**--##",
-"                                           .****;'))!**=-@#",
-"                                          ****;')))))~*{-.#",
-"                                        .***~')))))))]**--#",
-"                                       .**^/)))))))))>**$-.",
-"                                     .***;()))_:<[_))(**=-.",
-"                                    .**^})))|122223)))^*{--",
-"                                   ***4!))|5222226))));*7--",
-"                                 .***89)052222222|))))]**--",
-"                                .***})_1222222221)))))/**+.",
-"                               .**^')|6222222226a)))))'**#-",
-"                              .**~!a<2222222226b))))))'**=-",
-"                             +**49bc2222222222|))))))))**%-",
-"                            +**49b62222222222d)))))))))**e.",
-"                           +**49|22222222222<))))))))));*7-",
-"                          +**49|22222222222<)))))))))));*7-",
-"                         +**49|22222222222ca))))))))))),**-",
-"                        +**49|22222222222ca))))))))))))/**-",
-"                       +**49|22222222222ca)))))))))))))/**-",
-"                      +**^(b22222222222ca))))))))))))))}**-",
-"                      **^!b622222222226b)))))))))))))))'**#",
-"                     ***>a522222222226b))))))))))))))))'**#",
-"                    +**})122222222226b)))))))))))))))))'**#",
-"                   @**8)f22222222226b))))))))))))))))))(**$",
-"                  @**49|22222222226b))))))))))))))))))))**$",
-"                  **^!_62222222226b)))))))))))))))))))))**%",
-"                 @**>)c2222222226b))))))))))))))))))))))**e",
-"                @**])d22222222220)))))))))))))))))))))))**%",
-"               @**4932222222222|))))))))))))))))))))))))**e",
-"               ***!a5222222222|)))))))))))))))))))))))))4*%",
-"              @**/)f222222222|))))))))))))))))))))))))));*e",
-"             @**;)3222222222|)))))))))))))))))))))))))));*{",
-"             **^()c22222222|))))))))))))))))))))))))))));*7",
-"            #**/)d22222222|)))))))))))))))))))))))))))));*7",
-"           #**4)_62222222|))))))))))))))))))))))))))))));*7",
-"           #**!)[2222222:)))))))))))))))))))))))))))))));*7",
-"          @**])32222222<))))))))))))))))))))))))))))))));*7",
-"          **^9)5222222<)))))))))))))))))))))))))))))))));*7",
-"         #**g)|222222<))))))))))))))))))))))))))))))))));*7",
-"        #**;)a622222<)))))))))))))))))))))))))))))))))));*7",
-"        #**')d22222[))))))))))))))))))))))))))))))))))));*7",
-"       #**8)a62222ca))))))))))))))))))))))))))))))))))));*7",
-"       $*^()f2222ca)))))))))))))))))))))))))))))))))))));*7",
-"      #**/)_22225a))))))))))))))))))))))))))))))))))))));*7",
-"      **^9)<2226b)))))))))))))))))))))))))))))))))))))));*7",
-"     #**/)_2226b))))))))))))))))))))))))))))))))))))))));*{",
-"     **~))<2220)))))))))))))))))))))))))))))))))))))))));*7",
-"    #**g)a222|))))))))))))))))))))))))))))))))))))))))));*7",
-"    **~))d22f)))))))))))))))))))))))))))))))))))))))))))4*e",
-"   #**g)a62[))))))))))))))))))))))))))))))))))))))))))))**%",
-"   **~)):2ca))))))))))))))))))))))))))))))))))))))))))))**%",
-"  #**g))56b)))))))))))))))))))))))))))))))))))))))))))))**%",
-"  $*^))|20))))))))))))))))))))))))))))))))))))))))))))))**%",
-" $**/))1f))))))))))))))))))))))))))))))))))))))))))))))9**=",
-" $*^9)bc)))))))))))))))))))))))))))))))))))))))))))))))'**#",
-"$**/))<b)))))))))))))))))))))))))))))))))))))))))))))))'**$",
-"$**()a:))))))))))))))))))))))))))))))))))))))))))))))))'**#",
-"**8))|_))))))))))))))))))))))))))))))))))))))))))))))))}**#",
-"**!)):)))))))))))))))))))))))))))))))))))))))))))))))))/**-",
-"*4))0_)))))))))))))))))))))))))))))))))))))))))))))))))/**-",
-"*;))3)))))))))))))))))))))))))))))))))))))))))))))))))),*h-",
-"*4)))))))))))))))))))))))))))))))))))))))))))))))))))));*7-",
-"**)))))))))))))))))))))))))))))))))))))))))))))))))))))4*7-",
-"**>))))))))))))))))))))))))))))))))))))))))))))))))))))**{-",
-"**8))))))))))))))))))))))))))))))))))))))))))))))))))))**e-",
-"h*^9))))))))))))))))))))))))))))))))))))))))))))))))))'**%-",
-"7**/))))))))))))))))))))))))))))))))))))))))))))))))))'**$-",
-"#h**!)))))))))))))))))))))))))))))))))))))))))))))))))/**#-",
-"-7**49))))))))))))))))))))))))))))))))))))))))))))))))]**.-",
-"-+i**8))))))))))))))))))))))))))))))))))))))))))))))));*h--",
-"--$h**8)))))))))))))))))))))))))))))))))))))))))))))))~*7--",
-"---=h**89)))))))))))))))))))))))))))))))))))))))))))))**{.-",
-".---eh**4()))))))))))))))))))))))))))))))))))))))))))'**%--",
-"-----&h**^}))))))))))))))))))))))))))))))))))))))))))g**$--",
-"-.--.-#i***;!))))))))))))))))))))))))))))))))))))))))/**#--",
-"------..{****8())))))))))))))))))))))))))))))))))))));*h--.",
-"-.-------$i****8!))))))))))))))))))))))))))))))))))))^*7---",
-"---.------.%i****4g9))))))))))))))))))))))))))))))))(**{---",
-"------------.%i****^8>))))))))))))))))))))))))))))))>**&.--",
-".---.--.------.&i*****^,g())))))))))))))))))))))))))]**+---",
-"-.------.--.-----@{h******~8g())))))))))))))))))))))4*i----",
-"-----.-------.------${i*******~,/'())))))))))))))))9**{--.-",
-"--.-----.-----.--------@%7h********^;8/'!))))))))))g**$----",
-"-----------.----.----------#%{h***********^;,//>'');**-.---",
-"----.---.----------.-.-.--.----.$%77h****************h{e%ee",
-"-.------------.-------------.------.-##%e77h*********hhhhhh"};
diff --git a/perl-install/pixmaps/mouse_middle.xpm b/perl-install/pixmaps/mouse_middle.xpm
deleted file mode 100644
index 1724c9190..000000000
--- a/perl-install/pixmaps/mouse_middle.xpm
+++ /dev/null
@@ -1,89 +0,0 @@
-/* XPM */
-static char * mouse_middle_xpm[] = {
-"13 62 24 1",
-" 	c None",
-".	c #999ABD",
-"+	c #9E9EC1",
-"@	c #FF3310",
-"#	c #77819E",
-"$	c #FF330C",
-"%	c #FF330B",
-"&	c #FF3300",
-"*	c #FF3308",
-"=	c #FF3307",
-"-	c #142753",
-";	c #384365",
-">	c #6F7892",
-",	c #0F1C3D",
-"'	c #FF3304",
-")	c #FF3303",
-"!	c #606C8C",
-"~	c #525E81",
-"{	c #6D6E91",
-"]	c #898BA4",
-"^	c #A3A4C3",
-"/	c #AEB2CF",
-"(	c #A9ADCA",
-"_	c #BABEDA",
-".+@@@@@@@@@..",
-"##$$$$$$$$%##",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"#-$$$$$$$$%##",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"#-$$$$$$$$%##",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&$$$$$$$$%&&",
-"#;$$$$$$$$%;#",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"##********=.>",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&$$$$$$$$%&&",
-"-#********=,#",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"##$$$$$$$$%&&",
-"&&'''''''').#",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"!!@@@@@@@@@~#",
-"&&'''''''')&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"{!@@@@@@@@@~]",
-"&&'''''''')&&",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"!!@@@@@@@@@{.",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"!{@@@@@@@@@!^",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-".]@@@@@@@@@./",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"!!@@@@@@@@@!(",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"!!$$$$$$$$%!^",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"!!@@@@@@@@@!+",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"/_@@@@@@@@@/_",
-"__@@@@@@@@@__"};
diff --git a/perl-install/pixmaps/mouse_right.xpm b/perl-install/pixmaps/mouse_right.xpm
deleted file mode 100644
index 97c6824cb..000000000
--- a/perl-install/pixmaps/mouse_right.xpm
+++ /dev/null
@@ -1,143 +0,0 @@
-/* XPM */
-static char * mouse_right_xpm[] = {
-"61 91 49 1",
-" 	c None",
-".	c #7B84A1",
-"+	c #697392",
-"@	c #757C94",
-"#	c #848CAA",
-"$	c #5C6888",
-"%	c #BABEDA",
-"&	c #9FA1C0",
-"*	c #4A5778",
-"=	c #122450",
-"-	c #AFB0CD",
-";	c #9A9ABE",
-">	c #A7A9C8",
-",	c #253359",
-"'	c #4D283C",
-")	c #C42F14",
-"!	c #B52E19",
-"~	c #FF3300",
-"{	c #E1310A",
-"]	c #6B2A32",
-"^	c #21254B",
-"/	c #5C2937",
-"(	c #3E2741",
-"_	c #972C23",
-":	c #3E4862",
-"<	c #F03205",
-"[	c #A62D1E",
-"}	c #7A2B2D",
-"|	c #892C28",
-"1	c #D3300F",
-"2	c #11244D",
-"3	c #0E1A3A",
-"4	c #FF5300",
-"5	c #FF4000",
-"6	c #FF6600",
-"7	c #FF3900",
-"8	c #302646",
-"9	c #FF7300",
-"0	c #FF8000",
-"a	c #FF9300",
-"b	c #FF4600",
-"c	c #FF8600",
-"d	c #FF7900",
-"e	c #FF9900",
-"f	c #FF6000",
-"g	c #FF4D00",
-"h	c #FF8C00",
-"i	c #FF6C00",
-"j	c #FF5900",
-"...                                                          ",
-"+++@@@                                                       ",
-"#@$$$++++                                                    ",
-"%%%&.*===++                                                  ",
-"-%%%.======$$                                                ",
-";>%%,=')'====$$                                              ",
-";;-;==!~~{]====*$                                            ",
-";;;*=^~~~~~{/====**                                          ",
-";;;==]~~~~~~~)(===***                                        ",
-";;#==_~~~~~~~~~_^===*:                                       ",
-";;@==)~~~~~~~~~~</===:*                                      ",
-";;+==~~~~~~~~~~~~~[^==:::                                    ",
-";>:=(~~~~~~~~~~~~~~{(===::                                   ",
-";%==/~~~~~~~~~~~~~~~~}===,:                                  ",
-";%==|~~~~~~~~~~~~~~~~~[^==:,                                 ",
-">;==_~~~~~~~~~~~~~~~~~~1^==:,,                               ",
-"-;==)~~~~~~~~~~~~~~~~~~~{(==:,,                              ",
-"%+==1~~~~~~~~~~~~~~~~~~~~<(==,,,                             ",
-"%$==~~~~~~~~~~~~~~~~~~~~~~<]==:,,                            ",
-"%*==~~~~~~~~~~~~~~~~~~~~~~~~]==,,2                           ",
-"%:='~~~~~~~~~~~~~~~~~~~~~~~~~]==,,2                          ",
-"%:='~~~~~~~~~~~~~~~~~~~~~~~~~~]==,22                         ",
-"%==/~~~~~~~~~~~~~~~~~~~~~~~~~~~'==,22                        ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~<(==,22                       ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~<(==,2                       ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1^==22                      ",
-"&==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1===22                     ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~[===22                    ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~}==222                   ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'==22                   ",
-";==<~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~<^==32                  ",
-"#==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~)===22                 ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|==222                ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'==22                ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{^==22               ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~45~~~~[==232              ",
-"$==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~67~~~~/==22              ",
-"+=8~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~79~~~~<^==32             ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~46~~~~[==222            ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~04~~~~'==23            ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5ab~~~{^==22           ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6c7~~~|==232          ",
-"*='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~7ad~~~~8==23          ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6ef~~~)==222         ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~7eeg~~~/==23         ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~9ea7~~{===22        ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~bee0~~~|==23        ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ceef~~<^==22       ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~feeeb~~_==232      ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5eeec7~~8==23      ",
-"$='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~heeei~~[==223     ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ieeeeg~~8==32     ",
-"$==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeh7~!==232    ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~beeeeei~~'==23    ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~eeeeeeg~)==223   ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~aeeeeeh~~(==32   ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeee6~[==233  ",
-";==1~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeea5~8==22  ",
-"#==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeee9~[==23  ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeeee5~8=223 ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~aeeeeeeee9~_==22 ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~eeeeeeeeee5<^=233",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~geeeeeeeeee9~}==23",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~feeeeeeeeeea7{==22",
-"%:=/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeeeeeeej~/=22",
-"-:='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5eeeeeeeeeeee9~]=23",
-"%:=(~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeee0~'=22",
-"%+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~7aeeeeeeeeeeeee~^=22",
-"%+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeeeec1==22",
-"%#==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5aeeeeeeeeeeeee6}==22",
-"%;==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeeeeeeeeeh7^=22,",
-"%>==_~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeeeeeb_==22@",
-"%%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeeeeeeeeeeej{^==2,%",
-"%%,=/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeeeeeeeeeeej~'==22#%",
-"%%:='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeeeeeeeeeea4~]==22$%%",
-"%%$==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeeeec5~]==22,-%-",
-"%%@=={~~~~~~~~~~~~~~~~~~~~~~~~~~~7deeeeeeeeeeeea6~~]==22:-%-;",
-"%%;==)~~~~~~~~~~~~~~~~~~~~~~~~~~gheeeeeeeeeeee95~<'==22:-%-;;",
-"%->==|~~~~~~~~~~~~~~~~~~~~~~~~79eeeeeeeeeeee95~~!^==22*-%&;;;",
-"%%%==]~~~~~~~~~~~~~~~~~~~~~~76aeeeeeeeeeea65~~{'===22+%-&;;;;",
-"%%%:=(~~~~~~~~~~~~~~~~~~~~76aeeeeeeeeeed4~~~{]====2,;--;;;;;;",
-"%-%$==~~~~~~~~~~~~~~~~~~56aeeeeeeeeedj7~~~{]====2,+%-&;;;;;;;",
-"%%%@==)~~~~~~~~~~~~~~~4deeeeeeeeci4~~~~~['====22*>%-&;;;;;;#;",
-"%%%&==_~~~~~~~~~~~~49aeeeeee0i47~~~~~!]^====22*>%-;;;;;;;;;;;",
-"%%%%==]~~~~~~~~7j9aeeee0ifg~~~~~~<[]^=====2,+%%-&;;;;;;;;;;;;",
-"%-%%:=8~~~~74ice006fg7~~~~~~~{!}(======22$#%%-&;;;;;;;#;;;;;;",
-"%%%%+==1~~bggb~~~~~~~~~~<)|/8=======2,*.-%%>&;;;;;;;;;;;;;;;#",
-"%-%%&==_~~~~~~~~~~1)|}'^========22:$;%%%%-;;;;;;;;#;;;;;;;;;;",
-"%%%%%,=(~1)!||/'8===========22:+#-%%%%-&;;;;;;;;;;;;;;;;;;;;;",
-";#+$+:================23,:+.&%%%%%%-&;;;;;;;;;;;;;;;;;;#;;;;;",
-"222222=========22,:*$.;-%%%%%%%%>&&;;;;;;;;;;;;;;;;#;;;;;;;;;"};
diff --git a/perl-install/pixmaps/network.png b/perl-install/pixmaps/network.png
deleted file mode 100644
index aee48fb09..000000000
--- a/perl-install/pixmaps/network.png
+++ /dev/null
diff --git a/perl-install/pixmaps/partition.png b/perl-install/pixmaps/partition.png
deleted file mode 100644
index 982fb7681..000000000
--- a/perl-install/pixmaps/partition.png
+++ /dev/null
diff --git a/perl-install/pixmaps/quit.png b/perl-install/pixmaps/quit.png
deleted file mode 100644
index 3aa7db5e0..000000000
--- a/perl-install/pixmaps/quit.png
+++ /dev/null
diff --git a/perl-install/pixmaps/rootpasswd.png b/perl-install/pixmaps/rootpasswd.png
deleted file mode 100644
index af153abb6..000000000
--- a/perl-install/pixmaps/rootpasswd.png
+++ /dev/null
diff --git a/perl-install/pixmaps/security.png b/perl-install/pixmaps/security.png
deleted file mode 100644
index af153abb6..000000000
--- a/perl-install/pixmaps/security.png
+++ /dev/null
diff --git a/perl-install/pixmaps/services.png b/perl-install/pixmaps/services.png
deleted file mode 100644
index 7cd8b06d6..000000000
--- a/perl-install/pixmaps/services.png
+++ /dev/null
diff --git a/perl-install/pixmaps/summary.png b/perl-install/pixmaps/summary.png
deleted file mode 100644
index 79a1e0f4f..000000000
--- a/perl-install/pixmaps/summary.png
+++ /dev/null
diff --git a/perl-install/pixmaps/user.png b/perl-install/pixmaps/user.png
deleted file mode 100644
index a9f7d0eb6..000000000
--- a/perl-install/pixmaps/user.png
+++ /dev/null
diff --git a/perl-install/pixmaps/warning.png b/perl-install/pixmaps/warning.png
deleted file mode 100644
index d6f2306db..000000000
--- a/perl-install/pixmaps/warning.png
+++ /dev/null
diff --git a/perl-install/pkgs.pm b/perl-install/pkgs.pm
deleted file mode 100644
index e5905940a..000000000
--- a/perl-install/pkgs.pm
+++ /dev/null
@@ -1,1742 +0,0 @@
-package pkgs; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(*LOG %preferred $limitMinTrans %compssListDesc);
-
-use MDK::Common::System;
-use common;
-use install_any;
-use run_program;
-use detect_devices;
-use log;
-use fs;
-use loopback;
-use c;
-
-
-
-my @preferred = qw(perl-GTK postfix gcc gcc-cpp gcc-c++ proftpd ghostscript-X vim-minimal kernel db1 db2 ispell-en Bastille-Curses-module nautilus libxpm4);
-@preferred{@preferred} = ();
-
-#- lower bound on the left ( aka 90 means [90-100[ )
-%compssListDesc = (
-   5 => __("must have"),
-   4 => __("important"),
-   3 => __("very nice"),
-   2 => __("nice"),
-   1 => __("maybe"),
-);
-
-#- constant for small transaction.
-$limitMinTrans = 8;
-
-#- constant for package accessor (via table).
-my $FILE                 = 0;
-my $FLAGS                = 1;
-my $SIZE_DEPS            = 2;
-my $MEDIUM               = 3;
-my $PROVIDES             = 4;
-my $VALUES               = 5;
-my $HEADER               = 6;
-my $INSTALLED_CUMUL_SIZE = 7;
-my $EPOCH                = 8;
-
-#- constant for packing flags, see below.
-my $PKGS_SELECTED  = 0x00ffffff;
-my $PKGS_FORCE     = 0x01000000;
-my $PKGS_INSTALLED = 0x02000000;
-my $PKGS_BASE      = 0x04000000;
-my $PKGS_UPGRADE   = 0x20000000;
-
-#- package to ignore, typically in Application CD.
-my %ignoreBadPkg = (
-		    'civctp-demo'   => 1,
-		    'eus-demo'      => 1,
-		    'myth2-demo'    => 1,
-		    'heretic2-demo' => 1,
-		    'heroes3-demo'  => 1,
-		    'rt2-demo'      => 1,
-		   );
-
-#- basic methods for extracting informations about packages.
-#- to save memory, (name, version, release) are no more stored, they
-#- are directly generated from (file).
-#- all flags are grouped together into (flags), these includes the
-#- following flags : selected, force, installed, base, skip.
-#- size and deps are grouped to save memory too and make a much
-#- simpler and faster depslist reader, this gets (sizeDeps).
-sub packageHeaderFile   { $_[0] ? $_[0]->[$FILE]
-			    : die "invalid package from\n" . backtrace() }
-sub packageName         { $_[0] && $_[0]->[$FILE] =~ /^([^:\s]*)-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*(?::.*)?/ ? $1
-			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-sub packageVersion      { $_[0] && $_[0]->[$FILE] =~ /^[^:\s]*-([^:\-\s]+)-[^:\-\s]+\.[^:\.\-\s]*(?::.*)?/ ? $1
-			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-sub packageRelease      { $_[0] && $_[0]->[$FILE] =~ /^[^:\s]*-[^:\-\s]+-([^:\-\s]+)\.[^:\.\-\s]*(?::.*)?/ ? $1
-			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-sub packageArch         { $_[0] && $_[0]->[$FILE] =~ /^[^:\s]*-[^:\-\s]+-[^:\-\s]+\.([^:\.\-\s]*)(?::.*)?/ ? $1
-			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-sub packageFile         { $_[0] && $_[0]->[$FILE] =~ /^([^:\s]*-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*)(?::(.*))?/ ? ($2 || $1) . ".rpm"
-			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-sub packageEpoch        { $_[0] && $_[0]->[$EPOCH] || 0 }
-
-sub packageSize   { to_int($_[0] && ($_[0]->[$SIZE_DEPS] - ($_[0]->[$INSTALLED_CUMUL_SIZE] || 0))) }
-sub packageDepsId { split ' ', ($_[0] && ($_[0]->[$SIZE_DEPS] =~ /^\d*\s*(.*)/)[0]) }
-
-sub packageFlagSelected  { $_[0] && $_[0]->[$FLAGS] & $PKGS_SELECTED }
-sub packageFlagForce     { $_[0] && $_[0]->[$FLAGS] & $PKGS_FORCE }
-sub packageFlagInstalled { $_[0] && $_[0]->[$FLAGS] & $PKGS_INSTALLED }
-sub packageFlagBase      { $_[0] && $_[0]->[$FLAGS] & $PKGS_BASE }
-sub packageFlagUpgrade   { $_[0] && $_[0]->[$FLAGS] & $PKGS_UPGRADE }
-
-sub packageSetFlagSelected  { $_[0]->[$FLAGS] &= ~$PKGS_SELECTED; $_[0]->[$FLAGS] |= $_[1] & $PKGS_SELECTED; }
-
-sub packageSetFlagForce     { $_[0] or die "invalid package from\n" . backtrace();
-			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_FORCE)     : ($_[0]->[$FLAGS] &= ~$PKGS_FORCE); }
-sub packageSetFlagInstalled { $_[0] or die "invalid package from\n" . backtrace();
-			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_INSTALLED) : ($_[0]->[$FLAGS] &= ~$PKGS_INSTALLED); }
-sub packageSetFlagBase      { $_[0] or die "invalid package from\n" . backtrace();
-			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_BASE)      : ($_[0]->[$FLAGS] &= ~$PKGS_BASE); }
-sub packageSetFlagUpgrade   { $_[0] or die "invalid package from\n" . backtrace();
-			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_UPGRADE)   : ($_[0]->[$FLAGS] &= ~$PKGS_UPGRADE); }
-
-sub packageMedium { my ($packages, $p) = @_; $p or die "invalid package from\n" . backtrace();
-		    $packages->{mediums}{$p->[$MEDIUM]} }
-
-sub packageProvides { $_[1] or die "invalid package from\n" . backtrace();
-		      map { $_[0]->{depslist}[$_] || die "unkown package id $_" } unpack "s*", $_[1]->[$PROVIDES] }
-
-sub packageRate          { substr($_[0] && $_[0]->[$VALUES], 0, 1) }
-sub packageRateRFlags    { my ($rate, @flags) = split "\t", $_[0] && $_[0]->[$VALUES]; ($rate, @flags) }
-sub packageSetRateRFlags { my ($pkg, $rate, @flags) = @_; $pkg or die "invalid package from\n" . backtrace();
-			   $pkg->[$VALUES] = join("\t", $rate, @flags) }
-
-sub packageHeader     { $_[0] && $_[0]->[$HEADER] }
-sub packageFreeHeader { $_[0] && c::headerFree(delete $_[0]->[$HEADER]) }
-
-sub packageSelectedOrInstalled { packageFlagSelected($_[0]) || packageFlagInstalled($_[0]) }
-
-sub packageId {
-    my ($packages, $pkg) = @_;
-    my $i = 0;
-    foreach (@{$packages->{depslist}}) { return $i if $pkg == $packages->{depslist}[$i]; $i++ }
-    return;
-}
-
-sub cleanHeaders {
-    my ($prefix) = @_;
-    rm_rf("$prefix/tmp/headers") if -e "$prefix/tmp/headers";
-}
-
-#- get all headers from an hdlist file.
-sub extractHeaders {
-    my ($prefix, $pkgs, $media) = @_;
-    my %medium2pkgs;
-
-    cleanHeaders($prefix);
-
-    foreach (@$pkgs) {
-	push @{$medium2pkgs{$_->[$MEDIUM]} ||= []}, $_;
-    }
-
-    foreach (values %medium2pkgs) {
-	my $medium = $media->{$_->[0][$MEDIUM]}; #- the first one is a valid package pointing to right medium to use.
-
-	eval {
-	    require packdrake;
-	    my $packer = new packdrake("/tmp/$medium->{hdlist}", quiet => 1);
-	    $packer->extract_archive("$prefix/tmp/headers", map { packageHeaderFile($_) } @$_);
-	};
-    }
-
-    foreach (@$pkgs) {
-	my $f = "$prefix/tmp/headers/". packageHeaderFile($_);
-	local *H;
-	open H, $f or log::l("unable to open header file $f: $!"), next;
-	$_->[$HEADER] = c::headerRead(fileno H, 1) or log::l("unable to read header of package ". packageHeaderFile($_));
-    }
-    @$pkgs = grep { $_->[$HEADER] } @$pkgs;
-}
-
-#- size and correction size functions for packages.
-my $B = 1.20873;
-my $C = 4.98663; #- doesn't take hdlist's into account as getAvailableSpace will do it.
-sub correctSize { $B * $_[0] + $C }
-sub invCorrectSize { ($_[0] - $C) / $B }
-
-sub selectedSize {
-    my ($packages) = @_;
-    my $size = 0;
-    foreach (values %{$packages->{names}}) {
-	packageFlagSelected($_) && !packageFlagInstalled($_) and $size += packageSize($_);
-    }
-    $size;
-}
-sub correctedSelectedSize { correctSize(selectedSize($_[0]) / sqr(1024)) }
-
-sub size2time {
-    my ($x, $max) = @_;
-    my $A = 7e-07;
-    my $limit = min($max * 3 / 4, 9e8);
-    if ($x < $limit) {
-	$A * $x;
-    } else { 
-	$x -= $limit;
-	my $B = 6e-16;
-	my $C = 15e-07;
-	$B * $x ** 2 + $C * $x + $A * $limit;
-    }
-}
-
-
-#- searching and grouping methods.
-#- package is a reference to list that contains
-#- a hash to search by name and
-#- a list to search by id.
-sub packageByName {
-    my ($packages, $name) = @_;
-    $packages->{names}{$name} or log::l("unknown package `$name'") && undef;
-}
-sub packageById {
-    my ($packages, $id) = @_;
-    my $l = $packages->{depslist}[$id]; #- do not log as id unsupported are still in depslist.
-    $l && @$l && $l;
-}
-sub packagesOfMedium {
-    my ($packages, $medium) = @_;
-    grep { $_ && $_->[$MEDIUM] == $medium } @{$packages->{depslist}};
-}
-sub packagesToInstall {
-    my ($packages) = @_;
-    grep { packageFlagSelected($_) && !packageFlagInstalled($_) &&
-	     packageMedium($packages, $_)->{selected} } values %{$packages->{names}};
-}
-
-sub allMediums {
-    my ($packages) = @_;
-    sort { $a <=> $b } keys %{$packages->{mediums}};
-}
-sub mediumDescr {
-    my ($packages, $medium) = @_;
-    $packages->{mediums}{$medium}{descr};
-}
-
-#- selection, unselection of package.
-sub selectPackage { #($$;$$$)
-    my ($packages, $pkg, $base, $otherOnly, $check_recursion) = @_;
-
-    #- check for medium selection, if the medium has not been
-    #- selected, the package cannot be selected.
-    #- check if the same or better version is installed,
-    #- do not select in such case.
-    $pkg && packageMedium($packages, $pkg)->{selected} && !packageFlagInstalled($pkg) or return;
-
-    #- avoid infinite recursion (mainly against badly generated depslist.ordered).
-    $check_recursion ||= {}; exists $check_recursion->{$pkg->[$FILE]} and return; $check_recursion->{$pkg->[$FILE]} = undef;
-
-    #- make sure base package are set even if already selected.
-    $base and packageSetFlagBase($pkg, 1);
-
-    #- select package and dependancies, otherOnly may be a reference
-    #- to a hash to indicate package that will strictly be selected
-    #- when value is true, may be selected when value is false (this
-    #- is only used for unselection, not selection)
-    unless (packageFlagSelected($pkg)) {
-	foreach (packageDepsId($pkg)) {
-	    if (/\|/) {
-		#- choice deps should be reselected recursively as no
-		#- closure on them is computed, this code is exactly the
-		#- same as pixel's one.
-		my $preferred;	    
-		foreach (split '\|') {
-		    my $dep = packageById($packages, $_) or next;
-		    $preferred ||= $dep;
-		    packageFlagSelected($dep) and $preferred = $dep, last;
-		    packageName($dep) =~ /kernel-\d/ and $preferred = $dep; #- hard coded preference to simple kernel
-		    exists $preferred{packageName($dep)} and $preferred = $dep;
-		}
-		$preferred or die "unable to find a package for choice";
-		packageFlagSelected($preferred) or log::l("selecting default package as $preferred->[$FILE]");
-		selectPackage($packages, $preferred, $base, $otherOnly, $check_recursion);
-	    } else {
-		#- deps have been closed except for choices, so no need to
-		#- recursively apply selection, expand base on it.
-		my $dep = packageById($packages, $_);
-		$base and packageSetFlagBase($dep, 1);
-		$otherOnly and !packageFlagSelected($dep) and $otherOnly->{packageName($dep)} = 1;
-		$otherOnly or packageSetFlagSelected($dep, 1+packageFlagSelected($dep));
-	    }
-	}
-    }
-    $otherOnly and !packageFlagSelected($pkg) and $otherOnly->{packageName($pkg)} = 1;
-    $otherOnly or packageSetFlagSelected($pkg, 1+packageFlagSelected($pkg));
-    1;
-}
-sub unselectPackage($$;$) {
-    my ($packages, $pkg, $otherOnly) = @_;
-
-    #- base package are not unselectable,
-    #- and already unselected package are no more unselectable.
-    packageFlagBase($pkg) and return;
-    packageFlagSelected($pkg) or return;
-
-    #- dependancies may be used to propose package that may be not
-    #- usefull for the user, since their counter is just one and
-    #- they are not used any more by other packages.
-    #- provides are closed and are taken into account to get possible
-    #- unselection of package (value false on otherOnly) or strict
-    #- unselection (value true on otherOnly).
-    foreach my $provided ($pkg, packageProvides($packages, $pkg)) {
-	packageFlagBase($provided) and die "a provided package cannot be a base package";
-	if (packageFlagSelected($provided)) {
-	    my $unselect_alone = 1;
-	    foreach (packageDepsId($provided)) {
-		$unselect_alone = 0;
-		if (/\|/) {
-		    #- this package use a choice of other package, so we have to check
-		    #- if our package is not included in the choice, if this is the
-		    #- case, if must be checked one of the other package are selected.
-		    foreach (split '\|') {
-			my $dep = packageById($packages, $_) or next;
-			$dep == $pkg and $unselect_alone |= 1 and next;
-			packageFlagBase($dep) || packageFlagSelected($dep) and $unselect_alone |= 2;
-		    }
-		} else {
-		    packageById($packages, $_) == $pkg and $unselect_alone = 1;
-		}
-		$unselect_alone == 1 and last;
-	    }
-	    #- if package has been found and nothing more selected,
-	    #- deselect the provided, or we can ignore it safely.
-	    $provided == $pkg || $unselect_alone == 1 or next;
-	    $otherOnly or packageSetFlagSelected($provided, 0);
-	    $otherOnly and $otherOnly->{packageName($provided)} = 1;
-	}
-	foreach (map { split '\|' } packageDepsId($provided)) {
-	    my $dep = packageById($packages, $_) or next;
-	    packageFlagBase($dep) and next;
-	    packageFlagSelected($dep) or next;
-	    for (packageFlagSelected($dep)) {
-		$_ == 1 and do { $otherOnly and $otherOnly->{packageName($dep)} ||= 0; };
-		$_ >  1 and do { $otherOnly or packageSetFlagSelected($dep, $_-1); };
-		last;
-	    }
-	}
-    }
-    1;
-}
-sub togglePackageSelection($$;$) {
-    my ($packages, $pkg, $otherOnly) = @_;
-    packageFlagSelected($pkg) ? unselectPackage($packages, $pkg, $otherOnly) : selectPackage($packages, $pkg, 0, $otherOnly);
-}
-sub setPackageSelection($$$) {
-    my ($packages, $pkg, $value) = @_;
-    $value ? selectPackage($packages, $pkg) : unselectPackage($packages, $pkg);
-}
-
-sub unselectAllPackages($) {
-    my ($packages) = @_;
-    foreach (values %{$packages->{names}}) {
-	unless (packageFlagBase($_) || packageFlagUpgrade($_)) {
-	    packageSetFlagSelected($_, 0);
-	}
-    }
-}
-sub unselectAllPackagesIncludingUpgradable($) {
-    my ($packages, $removeUpgradeFlag) = @_;
-    foreach (values %{$packages->{names}}) {
-	unless (packageFlagBase($_)) {
-	    packageSetFlagSelected($_, 0);
-	    packageSetFlagUpgrade($_, 0);
-	}
-    }
-}
-
-sub psUpdateHdlistsDeps {
-    my ($prefix, $method, $packages) = @_;
-    my ($good_hdlists_deps, $mediums) = (0, 0);
-
-    #- check if current configuration is still up-to-date and do not need to be updated.
-    foreach (values %{$packages->{mediums}}) {
-	my $hdlistf = "$prefix/var/lib/urpmi/hdlist.$_->{fakemedium}.cz" . ($_->{hdlist} =~ /\.cz2/ && "2");
-	my $synthesisf = "$prefix/var/lib/urpmi/synthesis.hdlist.$_->{fakemedium}.cz" . ($_->{hdlist} =~ /\.cz2/ && "2");
-	-s $hdlistf == $_->{hdlist_size} && -s $synthesisf == $_->{synthesis_hdlist_size} and ++$good_hdlists_deps;
-	++$mediums;
-    }
-    $good_hdlists_deps > 0 && $good_hdlists_deps == $mediums and return; #- nothing to do.
-
-    #- at this point, this means partition has problably be reformatted and hdlists should be retrieved.
-    install_any::useMedium($install_any::boot_medium);
-
-    my $listf = install_any::getFile('Mandrake/base/hdlists') or die "no hdlists found";
-
-    #- WARNING: this function should be kept in sync with functions
-    #- psUsingHdlists and psUsingHdlist.
-    #- it purpose it to update hdlist files on system to install.
-
-    #- parse hdlist.list file.
-    my $medium = 1;
-    foreach (<$listf>) {
-	chomp;
-	s/\s*#.*$//;
-	/^\s*$/ and next;
-	m/^\s*(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die "invalid hdlist description \"$_\" in hdlists file";
-	my ($hdlist, $rpmsdir, $descr) = ($1, $2, $3);
-
-	#- copy hdlist file directly to $prefix/var/lib/urpmi, this will be used
-	#- for getting header of package during installation or after by urpmi.
-	my $fakemedium = "$descr ($method$medium)";
-	my $newf = "$prefix/var/lib/urpmi/hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
-	-e $newf and do { unlink $newf or die "cannot remove $newf: $!"; };
-	install_any::getAndSaveFile("Mandrake/base/$hdlist", $newf) or die "no $hdlist found";
-	symlinkf $newf, "/tmp/$hdlist";
-	install_any::getAndSaveFile("Mandrake/base/synthesis.$hdlist",
-				    "$prefix/var/lib/urpmi/synthesis.hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2"));
-	++$medium;
-    }
-
-    #- this is necessary for urpmi.
-    install_any::getAndSaveFile("Mandrake/base/$_", "$prefix/var/lib/urpmi/$_")
-      foreach qw(depslist.ordered provides rpmsrate);
-}
-
-sub psUsingHdlists {
-    my ($prefix, $method) = @_;
-    my $listf = install_any::getFile('Mandrake/base/hdlists') or die "no hdlists found";
-    my %packages = ( names => {}, count => 0, depslist => [], mediums => {});
-
-    #- parse hdlists file.
-    my $medium = 1;
-    foreach (<$listf>) {
-	chomp;
-	s/\s*#.*$//;
-	/^\s*$/ and next;
-	m/^\s*(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die "invalid hdlist description \"$_\" in hdlists file";
-
-	#- make sure the first medium is always selected!
-	#- by default select all image.
-	psUsingHdlist($prefix, $method, \%packages, $1, $medium, $2, $3, 1);
-
-	++$medium;
-    }
-
-    log::l("psUsingHdlists read " . scalar keys(%{$packages{names}}) .
-	   " headers on " . scalar keys(%{$packages{mediums}}) . " hdlists");
-
-    \%packages;
-}
-
-sub psUsingHdlist {
-    my ($prefix, $method, $packages, $hdlist, $medium, $rpmsdir, $descr, $selected, $fhdlist) = @_;
-    my $fakemedium = "$descr ($method$medium)";
-    my ($relocated, $ignored) = (0, 0);
-    log::l("trying to read $hdlist for medium $medium");
-
-    #- if the medium already exist, use it.
-    $packages->{mediums}{$medium} and return $packages->{mediums}{$medium};
-
-    my $m = $packages->{mediums}{$medium} = { hdlist     => $hdlist,
-					      method     => $method,
-					      medium     => $medium,
-					      rpmsdir    => $rpmsdir, #- where is RPMS directory.
-					      descr      => $descr,
-					      fakemedium => $fakemedium,
-					      min        => $packages->{count},
-					      max        => -1, #- will be updated after reading current hdlist.
-					      selected   => $selected, #- default value is only CD1, it is really the minimal.
-					    };
-
-    #- copy hdlist file directly to $prefix/var/lib/urpmi, this will be used
-    #- for getting header of package during installation or after by urpmi.
-    my $newf = "$prefix/var/lib/urpmi/hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
-    -e $newf and do { unlink $newf or die "cannot remove $newf: $!"; };
-    install_any::getAndSaveFile($fhdlist || "Mandrake/base/$hdlist", $newf) or die "no $hdlist found";
-    $m->{hdlist_size} = -s $newf; #- keep track of size for post-check.
-    symlinkf $newf, "/tmp/$hdlist";
-
-    #- if $fhdlist is defined, this is preferable not to try to find the associated synthesis.
-    unless ($fhdlist) {
-	#- copy existing synthesis file too.
-	my $newsf = "$prefix/var/lib/urpmi/synthesis.hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
-	install_any::getAndSaveFile("Mandrake/base/synthesis.$hdlist", $newsf);
-	$m->{synthesis_hdlist_size} = -s $newsf; #- keep track of size for post-check.
-	-s $newsf > 0 or unlink $newsf;
-    }
-
-    #- avoid using more than one medium if Cd is not ejectable.
-    #- but keep all medium here so that urpmi has the whole set.
-    $method eq 'cdrom' && $medium > 1 && !common::usingRamdisk() and return;
-
-    #- extract filename from archive, this take advantage of verifying
-    #- the archive too.
-    eval {
-	require packdrake;
-	my $packer = new packdrake($newf, quiet => 1);
-	foreach (@{$packer->{files}}) {
-	    $packer->{data}{$_}[0] eq 'f' or next;
-	    my $pkg = [ (undef) x 8 ]; $pkg->[$FILE] = $_; $pkg->[$MEDIUM] = $medium;
-	    my $specific_arch = packageArch($pkg);
-	    if (!$specific_arch || MDK::Common::System::compat_arch($specific_arch)) {
-		my $old_pkg = $packages->{names}{packageName($pkg)};
-		if ($old_pkg) {
-		    my $epo_compare = 0; #- NO EPOCH AVAILABLE TODO packageEpoch($pkg) <=> packageEpoch($old_pkg);
-		    my $ver_compare = $epo_compare == 0 && versionCompare(packageVersion($pkg), packageVersion($old_pkg));
-		    my $rel_compare = $ver_compare == 0 && versionCompare(packageRelease($pkg), packageRelease($old_pkg));
-		    if ($epo_compare > 0  || $ver_compare > 0 || $rel_compare > 0 ||
-			$epo_compare == 0 && $ver_compare == 0 && $rel_compare == 0 &&
-			MDK::Common::System::better_arch($specific_arch, packageArch($old_pkg))) {
-			log::l("replacing old package $old_pkg->[$FILE] with package $pkg->[$FILE]");
-			foreach ($FILE, $MEDIUM) { #- TODO KEEP OLD PARAMETER
-			    $old_pkg->[$_] = $pkg->[$_];
-			}
-			packageFreeHeader($old_pkg);
-			if (packageFlagInstalled($old_pkg)) {
-			    packageSetFlagInstalled($old_pkg, 0);
-			    selectPackage($packages, $old_pkg);
-			}
-			++$relocated;
-		    } else {
-			log::l("no need to replace previous package $old_pkg->[$FILE] with newer package $pkg->[$FILE]");
-			++$ignored;
-		    }
-		} else {
-		    $packages->{names}{packageName($pkg)} = $pkg;
-		    ++$packages->{count}; #- take care of this one, so that desplist will be clean with index of package.
-		}
-	    } else {
-	        log::l("ignoring package $_ with incompatible arch: $specific_arch");
-		++$ignored;
-	    }
-	}
-    };
-
-    #- update maximal index.
-    $m->{max} = $packages->{count} - 1;
-    $m->{max} >= $m->{min} || $relocated > 0 || $ignored > 0 or die "nothing found while parsing $newf";
-    $relocated > 0 and log::l("relocated $relocated headers in $hdlist");
-    $ignored > 0 and log::l("ignored $ignored headers in $hdlist");
-    log::l("read " . ($m->{max} - $m->{min} + 1) . " new headers in $hdlist");
-    $m;
-}
-
-sub getOtherDeps($$) {
-    my ($packages, $f) = @_;
-
-    #- this version of getDeps is customized for handling errors more easily and
-    #- convert reference by name to deps id including closure computation.
-    local $_;
-    while (<$f>) {
-	my ($name, $version, $release, $size, $deps) = /^(\S*)-([^-\s]+)-([^-\s]+)\s+(\d+)\s+(.*)/;
-	my $pkg = $packages->{names}{$name};
-
-	$pkg or log::l("ignoring package $name-$version-$release in depslist is not in hdlist"), next;
-	$version eq packageVersion($pkg) and $release eq packageRelease($pkg)
-	  or log::l("warning package $name-$version-$release in depslist mismatch version or release in hdlist ($version ne ",
-		    packageVersion($pkg), " or $release ne ", packageRelease($pkg), ")"), next;
-
-	my $index = scalar @{$packages->{depslist}};
-	$index >= packageMedium($packages, $pkg)->{min} && $index <= packageMedium($packages, $pkg)->{max}
-	  or log::l("ignoring package $name-$version-$release in depslist outside of hdlist indexation");
-
-	#- here we have to translate referenced deps by name to id.
-	#- this include a closure on deps too.
-	my %closuredeps;
-	@closuredeps{map { packageId($packages, $_), packageDepsId($_) }
-		       grep { $_ }
-			 map { packageByName($packages, $_) or do { log::l("unknown package $_ in depslist for closure"); undef } }
-			   split /\s+/, $deps} = ();
-
-	$pkg->[$SIZE_DEPS] = join " ", $size, keys %closuredeps;
-
-	push @{$packages->{depslist}}, $pkg;
-    }
-
-    #- check for same number of package in depslist and hdlists, avoid being to hard.
-    scalar(keys %{$packages->{names}}) == scalar(@{$packages->{depslist}})
-      or log::l("other depslist has not same package as hdlist file");
-}
-
-sub getDeps {
-    my ($prefix, $packages) = @_;
-
-    #- this is necessary for urpmi.
-    install_any::getAndSaveFile('Mandrake/base/depslist.ordered', "$prefix/var/lib/urpmi/depslist.ordered");
-    install_any::getAndSaveFile('Mandrake/base/provides', "$prefix/var/lib/urpmi/provides");
-
-    #- beware of heavily mismatching depslist.ordered file against hdlist files.
-    my $mismatch = 0;
-
-    #- count the number of packages in deplist that are also in hdlist
-    my $nb_deplist = 0;
-
-    #- update dependencies list, provides attributes are updated later
-    #- cross reference to be resolved on id (think of loop requires)
-    #- provides should be updated after base flag has been set to save
-    #- memory.
-    local *F; open F, "$prefix/var/lib/urpmi/depslist.ordered" or die "can't find dependancies list";
-    local $_;
-    while (<F>) {
-	my ($name, $version, $release, $arch, $epoch, $sizeDeps) =
-	  /^([^:\s]*)-([^:\-\s]+)-([^:\-\s]+)\.([^:\.\-\s]*)(?::(\d+)\S*)?\s+(.*)/;
-	my $pkg = $packages->{names}{$name};
-
-	#- these verification are necessary in case of error, but are no more fatal as
-	#- in case of only one medium taken into account during install, there should be
-	#- silent warning for package which are unknown at this point.
-	$pkg or
-	  log::l("ignoring $name-$version-$release.$arch in depslist is not in hdlist");
-	$pkg && $version ne packageVersion($pkg) and
-	  log::l("ignoring $name-$version-$release.$arch in depslist mismatch version in hdlist"), $pkg = undef;
-	$pkg && $release ne packageRelease($pkg) and
-	  log::l("ignoring $name-$version-$release.$arch in depslist mismatch release in hdlist"), $pkg = undef;
-	$pkg && $arch ne packageArch($pkg) and
-	  log::l("ignoring $name-$version-$release.$arch in depslist mismatch arch in hdlist"), $pkg = undef;
-
-	if ($pkg) {
-	    $nb_deplist++;
-	    $epoch && $epoch > 0 and $pkg->[$EPOCH] = $epoch; #- only 5% of the distribution use epoch (serial).
-	    $pkg->[$SIZE_DEPS] = $sizeDeps;
-
-	    #- check position of package in depslist according to precomputed
-	    #- limit by hdlist, very strict :-)
-	    #- above warning have chance to raise an exception here, but may help
-	    #- for debugging.
-	    my $i = scalar @{$packages->{depslist}};
-	    $i >= packageMedium($packages, $pkg)->{min} && $i <= packageMedium($packages, $pkg)->{max} or
-	      log::l("inconsistency in position for $name-$version-$release.$arch in depslist and hdlist"), $mismatch = 1;
-	}
-
-	#- package are already sorted in depslist to enable small transaction and multiple medium.
-	push @{$packages->{depslist}}, $pkg;
-    }
-
-    #- check for mismatching package, it should break with above die unless depslist has too many errors!
-    $mismatch and die "depslist.ordered mismatch against hdlist files";
-
-    #- check for same number of package in depslist and hdlists.
-    my $nb_hdlist = keys %{$packages->{names}};
-    $nb_hdlist == $nb_deplist or die "depslist.ordered has not same package as hdlist files ($nb_deplist != $nb_hdlist)";
-}
-
-sub getProvides($) {
-    my ($packages) = @_;
-
-    #- update provides according to dependencies, here are stored
-    #- reference to package directly and choice are included, this
-    #- assume only 1 of the choice is selected, else on unselection
-    #- the provided package will be deleted where other package still
-    #- need it.
-    #- base package are not updated because they cannot be unselected,
-    #- this save certainly a lot of memory since most of them may be
-    #- needed by a large number of package.
-    #- now using a packed of signed short, this means no more than 32768
-    #- packages can be managed by DrakX (currently about 2000).
-    my $i = 0;
-    foreach my $pkg (@{$packages->{depslist}}) {
-	$pkg or next;
-	unless (packageFlagBase($pkg)) {
-	    foreach (map { split '\|' } grep { !/^NOTFOUND_/ } packageDepsId($pkg)) {
-		my $provided = packageById($packages, $_) or next;
-		packageFlagBase($provided) or $provided->[$PROVIDES] = pack "s*", (unpack "s*", $provided->[$PROVIDES]), $i;
-	    }
-	}
-	++$i;
-    }
-}
-
-sub read_rpmsrate {
-    my ($packages, $f) = @_;
-    my $line_nb = 0;
-    my $fatal_error;
-    my (@l);
-    while (<$f>) {
-	$line_nb++;
-	/\t/ and die "tabulations not allowed at line $line_nb\n";
-	s/#.*//; # comments
-
-	my ($indent, $data) = /(\s*)(.*)/;
-	next if !$data; # skip empty lines
-
-	@l = grep { $_->[0] < length $indent } @l;
-
-	my @m = @l ? @{$l[$#l][1]} : ();
-	my ($t, $flag, @l2);
-	while ($data =~ 
-	       /^((
-                   [1-5]
-                   |
-                   (?:            (?: !\s*)? [0-9A-Z_]+(?:".*?")?)
-                   (?: \s*\|\|\s* (?: !\s*)? [0-9A-Z_]+(?:".*?")?)*
-                  )
-                  (?:\s+|$)
-                 )(.*)/x) { #@")) {
-	    ($t, $flag, $data) = ($1,$2,$3);
-	    while ($flag =~ s,^\s*(("[^"]*"|[^"\s]*)*)\s+,$1,) {}
-	    my $ok = 0;
-	    $flag = join('||', grep { 
-		if (my ($inv, $p) = /^(!)?HW"(.*)"/) {
-		    ($inv xor detect_devices::matching_desc($p)) and $ok = 1;
-		    0;
-		} else {
-		    1;
-		}
-	    } split '\|\|', $flag);
-	    push @m, $ok ? 'TRUE' : $flag || 'FALSE';
-	    push @l2, [ length $indent, [ @m ] ];
-	    $indent .= $t;
-	}
-	if ($data) {
-	    # has packages on same line
-	    my ($rate) = grep { /^\d$/ } @m or die sprintf qq(missing rate for "%s" at line %d (flags are %s)\n), $data, $line_nb, join('&&', @m);
-	    foreach (split ' ', $data) {
-		if ($packages) {
-		    my $p = packageByName($packages, $_) or next;
-		    my @m2 = 
-		      map { if_($_ && packageName($_) =~ /locales-(.*)/, qq(LOCALES"$1")) }
-		      map { packageById($packages, $_) } packageDepsId($p);
-
-		    my @m3 = ((grep { !/^\d$/ } @m), @m2);
-		    if (member('INSTALL', @m3)) {
-			member('NOCOPY', @m3) or push @{$packages->{needToCopy} ||= []}, $_;
-			next; #- don't need to put INSTALL flag for a package.
-		    }
-		    if (packageRate($p)) {
-			my ($rate2, @m4) = packageRateRFlags($p);
-			if (@m3 > 1 || @m4 > 1) {
-			    log::l("can't handle complicate flags for packages appearing twice ($_)");
-			    $fatal_error++;
-			}
-			log::l("package $_ appearing twice with different rates ($rate != $rate2)") if $rate != $rate2;
-			packageSetRateRFlags($p, $rate, "$m3[0]||$m4[0]");
-		    } else {
-			packageSetRateRFlags($p, $rate, @m3);
-		    }
-		} else {
-		    print "$_ = ", join(" && ", @m), "\n";
-		}
-	    }
-	    push @l, @l2;
-	} else {
-	    push @l, [ $l2[0][0], $l2[$#l2][1] ];
-	}
-    }
-    $fatal_error and die "$fatal_error fatal errors in rpmsrate";
-}
-
-sub readCompssUsers {
-    my ($meta_class) = @_;
-    my (%compssUsers, @sorted, $l);
-
-    my $file = 'Mandrake/base/compssUsers';
-    my $f = $meta_class && install_any::getFile("$file.$meta_class") || install_any::getFile($file) or die "can't find $file";
-    local $_;
-    while (<$f>) {
-	/^\s*$/ || /^#/ and next;
-	s/#.*//;
-
-	if (/^(\S.*)/) {
-	    my $verbatim = $_;
-	    my ($icon, $descr, $path);
-	    /^(.*?)\s*\[path=(.*?)\](.*)/  and $_ = "$1$3", $path  = $2;
-	    /^(.*?)\s*\[icon=(.*?)\](.*)/  and $_ = "$1$3", $icon  = $2;
-	    /^(.*?)\s*\[descr=(.*?)\](.*)/ and $_ = "$1$3", $descr = $2;
-	    $compssUsers{"$path|$_"} = { label => $_, verbatim => $verbatim, path => $path, icons => $icon, descr => $descr, flags => $l=[] };
-	    push @sorted, "$path|$_";
-	} elsif (/^\s+(.*?)\s*$/) {
-	    push @$l, $1;
-	}
-    }
-    \%compssUsers, \@sorted;
-}
-sub saveCompssUsers {
-    my ($prefix, $packages, $compssUsers, $sorted) = @_;
-    my $flat;
-    foreach (@$sorted) {
-	my @fl = @{$compssUsers->{$_}{flags}};
-	my %fl; $fl{$_} = 1 foreach @fl;
-	$flat .= $compssUsers->{$_}{verbatim};
-	foreach my $p (values %{$packages->{names}}) {
-	    my ($rate, @flags) = packageRateRFlags($p);
-	    if ($rate && grep { grep { !/^!/ && $fl{$_} } split('\|\|') } @flags) {
-		$flat .= sprintf "\t%d %s\n", $rate, packageName($p);
-	    }
-	}
-    }
-    output "$prefix/var/lib/urpmi/compssUsers.flat", $flat;
-}
-
-sub setSelectedFromCompssList {
-    my ($packages, $compssUsersChoice, $min_level, $max_size, $otherOnly) = @_;
-    $compssUsersChoice->{TRUE} = 1; #- ensure TRUE is set
-    my $nb = selectedSize($packages);
-    foreach my $p (sort { packageRate($b) <=> packageRate($a) } values %{$packages->{names}}) {
-	my ($rate, @flags) = packageRateRFlags($p);
-	next if 
-	  !$rate || $rate < $min_level || 
-	  grep { !grep { /^!(.*)/ ? !$compssUsersChoice->{$1} : $compssUsersChoice->{$_} } split('\|\|') } @flags;
-
-	#- determine the packages that will be selected when
-	#- selecting $p. the packages are not selected.
-	my %newSelection;
-	selectPackage($packages, $p, 0, \%newSelection);
-
-	#- this enable an incremental total size.
-	my $old_nb = $nb;
-	foreach (grep { $newSelection{$_} } keys %newSelection) {
-	    $nb += packageSize($packages->{names}{$_});
-	}
-	if ($max_size && $nb > $max_size) {
-	    $nb = $old_nb;
-	    $min_level = packageRate($p);
-	    last;
-	}
-
-	#- at this point the package can safely be selected.
-	if ($otherOnly) {
-	    selectPackage($packages, $p, 0, $otherOnly);
-	} else {
-	    selectPackage($packages, $p);
-	}
-    }
-    unless ($otherOnly) {
-	log::l("setSelectedFromCompssList: reached size ", formatXiB($nb), ", up to indice $min_level (less than ", formatXiB($max_size), ")");
-	log::l("setSelectedFromCompssList: ", join(" ", sort map { packageName($_) } grep { packageFlagSelected($_) } @{$packages->{depslist}}));
-    }
-    $min_level;
-}
-
-#- usefull to know the size it would take for a given min_level/max_size
-#- just saves the selected packages, call setSelectedFromCompssList and restores the selected packages
-sub saveSelected {
-    my ($packages) = @_;
-    my @l = values %{$packages->{names}};
-    my @flags = map { packageFlagSelected($_) } @l;
-    [ $packages, \@l, \@flags ];
-}
-sub restoreSelected {
-    my ($packages, $l, $flags) = @{$_[0]};
-    mapn { packageSetFlagSelected(@_) } $l, $flags;
-}
-
-sub computeGroupSize {
-    my ($packages, $min_level) = @_;
-
-    sub inside {
-	my ($l1, $l2) = @_;
-	my $i = 0;
-	return if @$l1 > @$l2;
-	foreach (@$l1) {
-	    my $c;
-	    while ($c = $l2->[$i++] cmp $_ ) {
-		return if $c == 1 || $i > @$l2;
-	    }
-	}
-	1;
-    }
-
-    sub or_ify {
-	my ($first, @other) = @_;
-	my @l = split('\|\|', $first);
-	foreach (@other) {
-	    @l = map {
-		my $n = $_;
-		map { "$_&&$n" } @l;
-	    } split('\|\|');
-	}
-	#- HACK, remove LOCALES & CHARSET, too costly
-	grep { !/LOCALES|CHARSET/ } @l;
-    }
-    sub or_clean {
-	my (@l) = map { [ sort split('&&') ] } @_ or return '';
-	my @r;
-	B: while (@l) {
-	    my $e = shift @l;
-	    foreach (@r, @l) {
-		inside($e, $_) and next B;
-	    }
-	    push @r, $e;
-	}
-	join("\t", map { join('&&', @$_) } @r);
-    }
-    my (%group, %memo);
-
-    foreach my $p (values %{$packages->{names}}) {
-	my ($rate, @flags) = packageRateRFlags($p);
-	next if !$rate || $rate < $min_level;
-
-	my $flags = join("\t", @flags = or_ify(@flags));
-	$group{packageName($p)} = ($memo{$flags} ||= or_clean(@flags));
-
-	#- determine the packages that will be selected when selecting $p. the packages are not selected.
-	my %newSelection;
-	selectPackage($packages, $p, 0, \%newSelection);
-	foreach (grep { $newSelection{$_} } keys %newSelection) {
-	    my $s = $group{$_} || do {
-		$packages->{names}{$_}[$VALUES] =~ /\t(.*)/;
-		join("\t", or_ify(split("\t", $1)));
-	    };
-	    next if length($s) > 80; # HACK, truncated too complicated expressions, too costly
-	    my $m = "$flags\t$s";
-	    $group{$_} = ($memo{$m} ||= or_clean(@flags, split("\t", $s)));
-	}
-    }
-    my (%sizes, %pkgs);
-    while (my ($k, $v) = each %group) {
-	push @{$pkgs{$v}}, $k;
-	$sizes{$v} += packageSize($packages->{names}{$k});
-    }
-    log::l(sprintf "%s %dMB %s", $_, $sizes{$_} / sqr(1024), join(',', @{$pkgs{$_}})) foreach keys %sizes;
-    \%sizes, \%pkgs;
-}
-
-
-sub init_db {
-    my ($prefix) = @_;
-
-    my $f = "$prefix/root/drakx/install.log";
-    open(LOG, ">> $f") ? log::l("opened $f") : log::l("Failed to open $f. No install log will be kept.");
-    *LOG or *LOG = log::F() or *LOG = *STDERR;
-    CORE::select((CORE::select(LOG), $| = 1)[0]);
-    c::rpmErrorSetCallback(fileno LOG);
-#-    c::rpmSetVeryVerbose();
-
-    log::l("reading /usr/lib/rpm/rpmrc");
-    c::rpmReadConfigFiles() or die "can't read rpm config files";
-    log::l("\tdone");
-}
-
-sub rebuild_db_open_for_traversal {
-    my ($packages, $prefix) = @_;
-
-    log::l("reading /usr/lib/rpm/rpmrc");
-    c::rpmReadConfigFiles() or die "can't read rpm config files";
-    log::l("\tdone");
-
-    unless (exists $packages->{rebuild_db}) {
-	if (my $pid = fork()) {
-	    waitpid $pid, 0;
-	    ($? & 0xff00) and die "rebuilding of rpm database failed";
-	} else {
-	    log::l("rebuilding rpm database");
-	    my $rebuilddb_dir = "$prefix/var/lib/rpmrebuilddb.$$";
-	    -d $rebuilddb_dir and log::l("removing stale directory $rebuilddb_dir"), rm_rf($rebuilddb_dir);
-
-	    c::rpmdbRebuild($prefix) or log::l("rebuilding of rpm database failed: ". c::rpmErrorString()), c::_exit(2);
-
-	    c::_exit(0);
-	}
-	$packages->{rebuild_db} = undef;
-    }
-
-    my $db = c::rpmdbOpenForTraversal($prefix) or die "unable to open $prefix/var/lib/rpm/Packages";
-    log::l("opened rpm database for examining existing packages");
-
-    $db;
-}
-
-sub clean_old_rpm_db {
-    my ($prefix) = @_;
-    my $failed;
-
-    foreach (qw(Basenames Conflictname Group Name Packages Providename Requirename Triggername)) {
-	-s "$prefix/var/lib/rpm/$_" or $failed = 'failed';
-    }
-    #- rebuilding has been successfull, so remove old rpm database if any.
-    #- once we have checked the rpm4 db file are present and not null, in case
-    #- of doubt, avoid removing them...
-    unless ($failed) {
-	log::l("rebuilding rpm database completed successfully");
-	foreach (qw(conflictsindex.rpm fileindex.rpm groupindex.rpm nameindex.rpm packages.rpm
-                    providesindex.rpm requiredby.rpm triggerindex.rpm)) {
-	    -e "$prefix/var/lib/rpm/$_" or next;
-	    log::l("removing old rpm file $_");
-	    rm_rf("$prefix/var/lib/rpm/$_");
-	}
-    }
-}
-
-sub done_db {
-    log::l("closing install.log file");
-    close LOG;
-}
-
-sub versionCompare($$) {
-    goto &c::rpmvercmp;
-}
-#- old code using perl version, still broken on some case.
-#-    my ($a, $b) = @_;
-#-    local $_;
-#-
-#-    while ($a || $b) {
-#-	my ($sb, $sa) =  map { $1 if $a =~ /^\W*\d/ ? s/^\W*0*(\d+)// : s/^\W*(\D*)// } ($b, $a);
-#-	$_ = ($sa =~ /^\d/ || $sb =~ /^\d/) && length($sa) <=> length($sb) || $sa cmp $sb and return $_ || 0;
-#-	$sa eq '' && $sb eq '' and return $a cmp $b || 0;
-#-    }
-
-sub selectPackagesAlreadyInstalled {
-    my ($packages, $prefix) = @_;
-
-    #- avoid rebuilding the database if such case.
-    $packages->{rebuild_db} = "oem does not need rebuilding the rpm db";
-    my $db = rebuild_db_open_for_traversal($packages, $prefix);
-
-    #- this method has only one objectif, check the presence of packages
-    #- already installed and avoid installing them again. this is to be used
-    #- with oem installation, if the database exists, preselect the packages
-    #- installed WHATEVER their version/release (log if a problem is perceived
-    #- is enough).
-    c::rpmdbTraverse($db, sub {
-			 my ($header) = @_;
-			 my $p = $packages->{names}{c::headerGetEntry($header, 'name')};
-
-			 if ($p) {
-			     my $epoch_cmp = c::headerGetEntry($header, 'epoch') <=> packageEpoch($p);
-			     my $version_cmp = $epoch_cmp == 0 && versionCompare(c::headerGetEntry($header, 'version'),
-										 packageVersion($p));
-			     my $version_rel_test = $epoch_cmp > 0 || $epoch_cmp == 0 &&
-			       ($version_cmp > 0 || $version_cmp == 0 &&
-				versionCompare(c::headerGetEntry($header, 'release'), packageRelease($p)) >= 0);
-			     $version_rel_test or log::l("keeping an older package, avoiding selecting $p->[$FILE]");
-			     packageSetFlagInstalled($p, 1);
-			 }
-		     });
-
-    #- close db, job finished !
-    c::rpmdbClose($db);
-    log::l("done selecting packages to upgrade");
-}
-
-sub selectPackagesToUpgrade($$$;$$) {
-    my ($packages, $prefix, $base, $toRemove, $toSave) = @_;
-    local $_; #- else perl complains on the map { ... } grep { ... } @...;
-
-    local (*UPGRADE_INPUT, *UPGRADE_OUTPUT); pipe UPGRADE_INPUT, UPGRADE_OUTPUT;
-    if (my $pid = fork()) {
-	@{$toRemove || []} = (); #- reset this one.
-
-	close UPGRADE_OUTPUT;
-	while (<UPGRADE_INPUT>) {
-	    chomp;
-	    my ($action, $name) = /^([\w\d]*):(.*)/;
-	    for ($action) {
-		/remove/    and do { push @$toRemove, $name; next };
-		/keepfiles/ and do { push @$toSave, $name; next };
-
-		my $p = $packages->{names}{$name} or die "unable to find package ($name)";
-		/^\d*$/     and do { $p->[$INSTALLED_CUMUL_SIZE] = $action; next };
-		/installed/ and do { packageSetFlagInstalled($p, 1); next };
-		/select/    and do { selectPackage($packages, $p); next };
-
-		die "unknown action ($action)";
-	    }
-	}
-	close UPGRADE_INPUT;
-	waitpid $pid, 0;
-    } else {
-	close UPGRADE_INPUT;
-	
-	my $db = rebuild_db_open_for_traversal($packages, $prefix);
-	#- used for package that are not correctly updated.
-	#- should only be used when nothing else can be done correctly.
-	my %upgradeNeedRemove = (
-#				 'libstdc++' => 1,
-#				 'compat-glibc' => 1,
-#				 'compat-libs' => 1,
-				);
-
-	#- generel purpose for forcing upgrade of package whatever version is.
-	my %packageNeedUpgrade = (
-				  #'lilo' => 1, #- this package has been misnamed in 7.0.
-				 );
-
-	#- help removing package which may have different release numbering
-	my %toRemove; map { $toRemove{$_} = 1 } @{$toRemove || []};
-
-	#- help searching package to upgrade in regard to already installed files.
-	my %installedFilesForUpgrade;
-
-	#- help keeping memory by this set of package that have been obsoleted.
-	my %obsoletedPackages;
-
-	#- make a subprocess here for reading filelist, this is important
-	#- not to waste a lot of memory for the main program which will fork
-	#- latter for each transaction.
-	local (*INPUT, *OUTPUT_CHILD); pipe INPUT, OUTPUT_CHILD;
-	local (*INPUT_CHILD, *OUTPUT); pipe INPUT_CHILD, OUTPUT;
-	if (my $pid = fork()) {
-	    close INPUT_CHILD;
-	    close OUTPUT_CHILD;
-	    select((select(OUTPUT), $| = 1)[0]);
-
-	    #- internal reading from interactive mode of parsehdlist.
-	    #- takes a code to call with the line read, this avoid allocating
-	    #- memory for that.
-	    my $ask_child = sub {
-		my ($name, $tag, $code) = @_;
-		$code or die "no callback code for parsehdlist output";
-		print OUTPUT "$name:$tag\n";
-
-		local $_;
-		while (<INPUT>) {
-		    chomp;
-		    /^\s*$/ and last;
-		    $code->($_);
-		}
-	    };
-
-	    #- select packages which obseletes other package, obselete package are not removed,
-	    #- should we remove them ? this could be dangerous !
-	    foreach my $p (values %{$packages->{names}}) {
-		$ask_child->(packageName($p), "obsoletes", sub {
-				 #- take care of flags and version and release if present
-				 local ($_) = @_;
-				 if (my ($n,$o,$v,$r) = /^(\S*)\s*(\S*)\s*([^\s-]*)-?(\S*)/) {
-				     my $obsoleted = 0;
-				     my $check_obsoletes = sub {
-					 my ($header) = @_;
-					 (!$v || eval(versionCompare(c::headerGetEntry($header, 'version'), $v) . $o . 0)) &&
-					   (!$r || versionCompare(c::headerGetEntry($header, 'version'), $v) != 0 ||
-					    eval(versionCompare(c::headerGetEntry($header, 'release'), $r) . $o . 0)) or return;
-					 ++$obsoleted;
-				     };
-				     c::rpmdbNameTraverse($db, $n, $check_obsoletes);
-				     if ($obsoleted > 0) {
-					 log::l("selecting " . packageName($p) . " by selection on obsoletes");
-					 $obsoletedPackages{$1} = undef;
-					 selectPackage($packages, $p);
-				     }
-				 }
-			     });
-	    }
-
-	    #- mark all files which are not in /etc/rc.d/ for packages which are already installed but which
-	    #- are not in the packages list to upgrade.
-	    #- the 'installed' property will make a package unable to be selected, look at select.
-	    c::rpmdbTraverse($db, sub {
-				 my ($header) = @_;
-				 my $otherPackage = (c::headerGetEntry($header, 'release') !~ /mdk\w*$/ &&
-						     (c::headerGetEntry($header, 'name'). '-' .
-						      c::headerGetEntry($header, 'version'). '-' .
-						      c::headerGetEntry($header, 'release')));
-				 my $p = $packages->{names}{c::headerGetEntry($header, 'name')};
-
-				 if ($p) {
-				     my $epoch_cmp = c::headerGetEntry($header, 'epoch') <=> packageEpoch($p);
-				     my $version_cmp = $epoch_cmp == 0 && versionCompare(c::headerGetEntry($header, 'version'),
-											 packageVersion($p));
-				     my $version_rel_test = $epoch_cmp > 0 || $epoch_cmp == 0 &&
-				       ($version_cmp > 0 || $version_cmp == 0 &&
-					versionCompare(c::headerGetEntry($header, 'release'), packageRelease($p)) >= 0);
-				     if ($packageNeedUpgrade{packageName($p)}) {
-					 log::l("package ". packageName($p) ." need to be upgraded");
-				     } elsif ($version_rel_test) { #- by default, package are upgraded whatever version is !
-					 if ($otherPackage && $version_cmp <= 0) {
-					     log::l("force upgrading $otherPackage since it will not be updated otherwise");
-					 } else {
-					     #- let the parent known this installed package.
-					     print UPGRADE_OUTPUT "installed:" . packageName($p) . "\n";
-					     packageSetFlagInstalled($p, 1);
-					 }
-				     } elsif ($upgradeNeedRemove{packageName($p)}) {
-					 my $otherPackage = (c::headerGetEntry($header, 'name'). '-' .
-							     c::headerGetEntry($header, 'version'). '-' .
-							     c::headerGetEntry($header, 'release'));
-					 log::l("removing $otherPackage since it will not upgrade correctly!");
-					 $toRemove{$otherPackage} = 1; #- force removing for theses other packages, select our.
-				     }
-				 } else {
-				     if (exists $obsoletedPackages{c::headerGetEntry($header, 'name')}) {
-					 my @files = c::headerGetEntry($header, 'filenames');
-					 @installedFilesForUpgrade{grep { ($_ !~ m|^/dev/| && $_ !~ m|^/etc/rc.d/| && $_ !~ m|\.la$| &&
-									   ! -d "$prefix/$_" && ! -l "$prefix/$_") } @files} = ();
-				     }
-				 }
-			     });
-
-	    #- find new packages to upgrade.
-	    foreach my $p (values %{$packages->{names}}) {
-		my $skipThis = 0;
-		my $count = c::rpmdbNameTraverse($db, packageName($p), sub {
-						     my ($header) = @_;
-						     $skipThis ||= packageFlagInstalled($p);
-						 });
-
-		#- skip if not installed (package not found in current install).
-		$skipThis ||= ($count == 0);
-
-		#- make sure to upgrade package that have to be upgraded.
-		$packageNeedUpgrade{packageName($p)} and $skipThis = 0;
-
-		#- select the package if it is already installed with a lower version or simply not installed.
-		unless ($skipThis) {
-		    my $cumulSize;
-
-		    selectPackage($packages, $p);
-
-		    #- keep in mind installed files which are not being updated. doing this costs in
-		    #- execution time but use less memory, else hash all installed files and unhash
-		    #- all file for package marked for upgrade.
-		    c::rpmdbNameTraverse($db, packageName($p), sub {
-					     my ($header) = @_;
-					     $cumulSize += c::headerGetEntry($header, 'size');
-					     my @files = c::headerGetEntry($header, 'filenames');
-					     @installedFilesForUpgrade{grep { ($_ !~ m|^/dev/| && $_ !~ m|^/etc/rc.d/| && $_ !~ m|\.la$| &&
-									   ! -d "$prefix/$_" && ! -l "$prefix/$_") } @files} = ();
-					 });
-
-		    $ask_child->(packageName($p), "files", sub {
-				     delete $installedFilesForUpgrade{$_[0]};
-				 });
-
-		    #- keep in mind the cumul size of installed package since they will be deleted
-		    #- on upgrade, only for package that are allowed to be upgraded.
-		    if (allowedToUpgrade(packageName($p))) {
-			print UPGRADE_OUTPUT "$cumulSize:" . packageName($p) . "\n";
-		    }
-		}
-	    }
-
-	    #- unmark all files for all packages marked for upgrade. it may not have been done above
-	    #- since some packages may have been selected by depsList.
-	    foreach my $p (values %{$packages->{names}}) {
-		if (packageFlagSelected($p)) {
-		    $ask_child->(packageName($p), "files", sub {
-				     delete $installedFilesForUpgrade{$_[0]};
-				 });
-		}
-	    }
-
-	    #- select packages which contains marked files, then unmark on selection.
-	    #- a special case can be made here, the selection is done only for packages
-	    #- requiring locales if the locales are selected.
-	    #- another special case are for devel packages where fixes over the time has
-	    #- made some files moving between the normal package and its devel couterpart.
-	    #- if only one file is affected, no devel package is selected.
-	    foreach my $p (values %{$packages->{names}}) {
-		unless (packageFlagSelected($p)) {
-		    my $toSelect = 0;
-		    $ask_child->(packageName($p), "files", sub {
-				     if ($_[0] !~ m|^/dev/| && $_[0] !~  m|^/etc/rc.d/| &&  $_ !~ m|\.la$| && exists $installedFilesForUpgrade{$_[0]}) {
-					 ++$toSelect if ! -d "$prefix/$_[0]" && ! -l "$prefix/$_[0]";
-				     }
-				     delete $installedFilesForUpgrade{$_[0]};
-				 });
-		    if ($toSelect) {
-			if ($toSelect <= 1 && packageName($p) =~ /-devel/) {
-			    log::l("avoid selecting " . packageName($p) . " as not enough files will be updated");
-			} else {
-			    #- default case is assumed to allow upgrade.
-			    my @deps = map { my $p = packageById($packages, $_);
-					     if_($p && packageName($p) =~ /locales-/, $p) } packageDepsId($p);
-			    if (@deps == 0 || @deps > 0 && (grep { !packageFlagSelected($_) } @deps) == 0) {
-				log::l("selecting " . packageName($p) . " by selection on files");
-				selectPackage($packages, $p);
-			    } else {
-				log::l("avoid selecting " . packageName($p) . " as its locales language is not already selected");
-			    }
-			}
-		    }
-		}
-	    }
-
-	    #- clean memory...
-	    %installedFilesForUpgrade = ();
-
-	    #- no need to still use the child as this point, we can let him to terminate.
-	    close OUTPUT;
-	    close INPUT;
-	    waitpid $pid, 0;
-	} else {
-	    close INPUT;
-	    close OUTPUT;
-	    open STDIN, "<&INPUT_CHILD";
-	    open STDOUT, ">&OUTPUT_CHILD";
-	    exec if_($ENV{LD_LOADER}, $ENV{LD_LOADER}), "parsehdlist", "--interactive", map { "/tmp/$_->{hdlist}" } values %{$packages->{mediums}}
-	      or c::_exit(1);
-	}
-
-	#- let the parent known about what we found here!
-	foreach my $p (values %{$packages->{names}}) {
-	    print UPGRADE_OUTPUT "select:" . packageName($p) . "\n" if packageFlagSelected($p);
-	}
-
-	#- clean false value on toRemove.
-	delete $toRemove{''};
-
-	#- get filenames that should be saved for packages to remove.
-	#- typically config files, but it may broke for packages that
-	#- are very old when compabilty has been broken.
-	#- but new version may saved to .rpmnew so it not so hard !
-	if ($toSave && keys %toRemove) {
-	    c::rpmdbTraverse($db, sub {
-				 my ($header) = @_;
-				 my $otherPackage = (c::headerGetEntry($header, 'name'). '-' .
-						     c::headerGetEntry($header, 'version'). '-' .
-						     c::headerGetEntry($header, 'release'));
-				 if ($toRemove{$otherPackage}) {
-				     print UPGRADE_OUTPUT "remove:$otherPackage\n";
-				     if (packageFlagBase($packages->{names}{c::headerGetEntry($header, 'name')})) {
-					 delete $toRemove{$otherPackage}; #- keep it selected, but force upgrade.
-				     } else {
-					 my @files = c::headerGetEntry($header, 'filenames');
-					 my @flags = c::headerGetEntry($header, 'fileflags');
-					 for my $i (0..$#flags) {
-					     if ($flags[$i] & c::RPMFILE_CONFIG()) {
-						 print UPGRADE_OUTPUT "keepfiles:$files[$i]\n" unless $files[$i] =~ /kdelnk/;
-					     }
-					 }
-				     }
-				 }
-			     });
-	}
-
-	#- close db, job finished !
-	c::rpmdbClose($db);
-	log::l("done selecting packages to upgrade");
-
-	close UPGRADE_OUTPUT;
-	c::_exit(0);
-    }
-
-    #- keep a track of packages that are been selected for being upgraded,
-    #- these packages should not be unselected (unless expertise)
-    foreach my $p (values %{$packages->{names}}) {
-	packageSetFlagUpgrade($p, 1) if packageFlagSelected($p);
-    }
-}
-
-sub allowedToUpgrade { $_[0] !~ /^(kernel|kernel22|kernel2.2|kernel-secure|kernel-smp|kernel-linus|kernel-linus2.2|hackkernel|kernel-enterprise)$/ }
-
-sub installCallback {
-#    my $msg = shift;
-#    log::l($msg .": ". join(',', @_));
-}
-
-sub install($$$;$$) {
-    my ($prefix, $isUpgrade, $toInstall, $depOrder, $media) = @_;
-    my %packages;
-
-    return if $::g_auto_install || !scalar(@$toInstall);
-
-    #- for root loopback'ed /boot
-    my $loop_boot = loopback::prepare_boot($prefix);
-
-    #- first stage to extract some important informations
-    #- about the packages selected. this is used to select
-    #- one or many transaction.
-    my ($total, $nb);
-    foreach my $pkg (@$toInstall) {
-	$packages{packageName($pkg)} = $pkg;
-	$nb++;
-	$total += to_int($pkg->[$SIZE_DEPS]); #- do not correct for upgrade!
-    }
-
-    log::l("pkgs::install $prefix");
-    log::l("pkgs::install the following: ", join(" ", keys %packages));
-    eval { fs::mount("/proc", "$prefix/proc", "proc", 0) } unless -e "$prefix/proc/cpuinfo";
-
-    init_db($prefix);
-
-    my $callbackOpen = sub {
-	my $p = $packages{$_[0]} or log::l("unable to retrieve package of $_[0]"), return -1;
-	my $f = packageFile($p);
-	print LOG "$f $media->{$p->[$MEDIUM]}{descr}\n";
-	my $fd = install_any::getFile($f, $media->{$p->[$MEDIUM]}{descr});
-	$fd ? fileno $fd : -1;
-    };
-    my $callbackClose = sub { packageSetFlagInstalled($packages{$_[0]}, 1) };
-
-    #- do not modify/translate the message used with installCallback since
-    #- these are keys during progressing installation, or change in other
-    #- place (install_steps_gtk.pm,...).
-    installCallback("Starting installation", $nb, $total);
-
-    my ($i, $min, $medium) = (0, 0, 1);
-    do {
-	my @transToInstall;
-
-	if (!$depOrder || !$media) {
-	    @transToInstall = values %packages;
-	    $nb = 0;
-	} else {
-	    do {
-		#- change current media if needed.
-		if ($i > $media->{$medium}{max}) {
-		    #- search for media that contains the desired package to install.
-		    foreach (keys %$media) {
-			$i >= $media->{$_}{min} && $i <= $media->{$_}{max} and $medium = $_, last;
-		    }
-		}
-		$i >= $media->{$medium}{min} && $i <= $media->{$medium}{max} or die "unable to find right medium";
-		install_any::useMedium($medium);
-
-		while ($i <= $media->{$medium}{max} && ($i < $min || scalar @transToInstall < $limitMinTrans)) {
-		    my $pkg = $depOrder->[$i++] or next;
-		    my $dep = $packages{packageName($pkg)} or next;
-		    if ($media->{$dep->[$MEDIUM]}{selected}) {
-			push @transToInstall, $dep;
-			foreach (map { split '\|' } packageDepsId($dep)) {
-			    $min < $_ and $min = $_;
-			}
-		    } else {
-			log::l("ignoring package $dep->[$FILE] as its medium is not selected");
-		    }
-		    --$nb; #- make sure the package is not taken into account as its medium is not selected.
-		}
-	    } while ($nb > 0 && scalar(@transToInstall) == 0); #- avoid null transaction, it a nop that cost a bit.
-	}
-
-	#- added to exit typically after last media unselected.
-	if ($nb == 0 && scalar(@transToInstall) == 0) {
-	    cleanHeaders($prefix);
-
-	    loopback::save_boot($loop_boot);
-	    return;
-	}
-
-	#- extract headers for parent as they are used by callback.
-	extractHeaders($prefix, \@transToInstall, $media);
-
-	if ($media->{$medium}{method} eq 'cdrom') {
-	    #- extract packages to make sure the getFile below to force
-	    #- accessing medium will not be redirected to updates.
-	    my @origin = grep { $_->[$MEDIUM] == $medium } @transToInstall;
-
-	    if (@origin) {
-		#- reset file descriptor open for main process but
-		#- make sure error trying to change from hdlist are
-		#- trown from main process too.
-		install_any::getFile(packageFile($origin[0]), $media->{$origin[0][$MEDIUM]}{descr});
-
-		#- allow some log here to check selected status.
-		log::l("status for medium $origin[0][$MEDIUM] ($media->{$origin[0][$MEDIUM]}{descr}) is " .
-		       ($media->{$origin[0][$MEDIUM]}{selected} ? "selected" : "refused"));
-	    }
-	}
-	#- and make sure there are no staling open file descriptor too (before forking)!
-	install_any::getFile('XXX');
-
-	my ($retry_package, $retry_count);
-	while ($retry_package || @transToInstall) {
-	    local (*INPUT, *OUTPUT); pipe INPUT, OUTPUT;
-	    if (my $pid = fork()) {
-		close OUTPUT;
-		my $error_msg = '';
-		local $_;
-		while (<INPUT>) {
-		    if (/^die:(.*)/) {
-			$error_msg = $1;
-			last;
-		    } else {
-			chomp;
-			my @params = split ":";
-			if ($params[0] eq 'close') {
-			    &$callbackClose($params[1]);
-			} else {
-			    installCallback(@params);
-			}
-		    }
-		}
-		$error_msg and $error_msg .= join('', <INPUT>);
-		waitpid $pid, 0;
-		close INPUT;
-		$error_msg and die $error_msg;
-	    } else {
-		#- child process will run each transaction.
-		$SIG{SEGV} = sub { log::l("segmentation fault on transactions"); c::_exit(0) };
-		my @prev_pids = grep { /^\d+$/ } all("/proc");
-		my $db;
-		eval {
-		    close INPUT;
-		    select((select(OUTPUT),  $| = 1)[0]);
-		    $db = c::rpmdbOpen($prefix) or die "error opening RPM database: ", c::rpmErrorString();
-		    my $trans = c::rpmtransCreateSet($db, $prefix);
-		    if ($retry_package) {
-			log::l("opened rpm database for retry transaction of 1 package only");
-			c::rpmtransAddPackage($trans, $retry_package->[$HEADER], packageName($retry_package),
-					      $isUpgrade && allowedToUpgrade(packageName($retry_package)));
-		    } else {
-			log::l("opened rpm database for transaction of ". scalar @transToInstall ." new packages, still $nb after that to do");
-			c::rpmtransAddPackage($trans, $_->[$HEADER], packageName($_),
-					      $isUpgrade && allowedToUpgrade(packageName($_)))
-			    foreach @transToInstall;
-		    }
-
-		    c::rpmdepOrder($trans) or die "error ordering package list: " . c::rpmErrorString();
-		    c::rpmtransSetScriptFd($trans, fileno LOG);
-
-		    log::l("rpmRunTransactions start");
-		    my @probs = c::rpmRunTransactions($trans, $callbackOpen,
-						      sub { #- callbackClose
-							  my $p = $packages{$_[0]} or return;
-							  my $check_installed;
-							  c::rpmdbNameTraverse($db, packageName($p), sub {
-										   my ($header) = @_;
-										   $check_installed ||= c::headerGetEntry($header, 'version') eq packageVersion($p) && c::headerGetEntry($header, 'release') eq packageRelease($p);
-									       });
-							  $check_installed and print OUTPUT "close:$_[0]\n"; },
-						      sub { #- installCallback
-							  print OUTPUT join(":", @_), "\n"; },
-						      1);
-		    log::l("rpmRunTransactions done, now trying to close still opened fd");
-		    install_any::getFile('XXX'); #- close still opened fd.
-
-		    if (@probs) {
-			my %parts;
-			@probs = reverse grep {
-			    if (s/(installing package) .* (needs (?:.*) on the (.*) filesystem)/$1 $2/) {
-				$parts{$3} ? 0 : ($parts{$3} = 1);
-			    } else {
-				1;
-			    }
-			} reverse map { s|/mnt||; $_ } @probs;
-
-			c::rpmdbClose($db);
-			die "installation of rpms failed:\n  ", join("\n  ", @probs);
-		    }
-		}; $@ and print OUTPUT "die:$@\n";
-
-		c::rpmdbClose($db);
-		log::l("rpm database closed");
-
-		close OUTPUT;
-
-		#- now search for child process which may be locking the cdrom, making it unable to be ejected.
-		my @allpids = grep { /^\d+$/ } all("/proc");
-		my %ppids;
-		foreach (@allpids) {
-		    cat_("/proc/$_/status") =~ /^PPid:\s+(\d+)/m;
-		    push @{$ppids{$1 || 1}}, $_;
-		}
-		my @killpid = difference2(\@allpids, [ @prev_pids, 
-						       difference2([ $$, hashtree2list(getppid, \%ppids) ],
-								   [ hashtree2list($$, \%ppids) ]) ]);
-	
-		if (@killpid) {
-		    log::l("ERROR: DrakX should not have to clean the packages shit. Killing ". join(", ", @killpid));
-		    kill 15, @killpid;
-		    sleep 2;
-		    kill 9, @killpid;
-		}
-
-		c::_exit(0);
-	    }
-
-	    #- if we are using a retry mode, this means we have to split the transaction with only
-	    #- one package for each real transaction.
-	    unless ($retry_package) {
-		my @badPackages;
-		foreach (@transToInstall) {
-		    if (!packageFlagInstalled($_) && $media->{$_->[$MEDIUM]}{selected} && !exists($ignoreBadPkg{packageName($_)})) {
-			push @badPackages, $_;
-			log::l("bad package $_->[$FILE]");
-		    } else {
-			packageFreeHeader($_);
-		    }
-		}
-		@transToInstall = @badPackages;
-		#- if we are in retry mode, we have to fetch only one package at a time.
-		$retry_package = shift @transToInstall;
-		$retry_count = 3;
-	    } else {
-		if (!packageFlagInstalled($retry_package) && $media->{$retry_package->[$MEDIUM]}{selected} && !exists($ignoreBadPkg{packageName($retry_package)})) {
-		    if ($retry_count) {
-			log::l("retrying installing package $retry_package->[$FILE] alone in a transaction");
-			--$retry_count;
-		    } else {
-			log::l("bad package $retry_package->[$FILE] unable to be installed");
-			packageSetFlagSelected($retry_package, 0);
-			cdie ("error installing package list: $retry_package->[$FILE]");
-		    }
-		}
-		if (packageFlagInstalled($retry_package) || ! packageFlagSelected($retry_package)) {
-		    packageFreeHeader($retry_package);
-		    $retry_package = shift @transToInstall;
-		    $retry_count = 3;
-		}
-	    }
-	}
-	cleanHeaders($prefix);
-    } while ($nb > 0 && !$pkgs::cancel_install);
-
-    done_db();
-
-    cleanHeaders($prefix);
-
-    loopback::save_boot($loop_boot);
-}
-
-sub remove($$) {
-    my ($prefix, $toRemove) = @_;
-
-    return if $::g_auto_install || !@{$toRemove || []};
-
-    log::l("reading /usr/lib/rpm/rpmrc");
-    c::rpmReadConfigFiles() or die "can't read rpm config files";
-    log::l("\tdone");
-
-    my $db = c::rpmdbOpen($prefix) or die "error opening RPM database: ", c::rpmErrorString();
-    log::l("opened rpm database for removing old packages");
-
-    my $trans = c::rpmtransCreateSet($db, $prefix);
-
-    foreach my $p (@$toRemove) {
-	#- stuff remove all packages that matches $p, not a problem since $p has name-version-release format.
-	c::rpmtransRemovePackages($db, $trans, $p) if allowedToUpgrade($p);
-    }
-
-    eval { fs::mount("/proc", "$prefix/proc", "proc", 0) } unless -e "$prefix/proc/cpuinfo";
-
-    my $callbackOpen = sub { log::l("trying to open file from $_[0] which should not happen"); };
-    my $callbackClose = sub { log::l("trying to close file from $_[0] which should not happen"); };
-
-    #- we are not checking depends since it should come when
-    #- upgrading a system. although we may remove some functionalities ?
-
-    #- do not modify/translate the message used with installCallback since
-    #- these are keys during progressing installation, or change in other
-    #- place (install_steps_gtk.pm,...).
-    installCallback("Starting removing other packages", scalar @$toRemove);
-
-    if (my @probs = c::rpmRunTransactions($trans, $callbackOpen, $callbackClose, \&installCallback, 1)) {
-	die "removing of old rpms failed:\n  ", join("\n  ", @probs);
-    }
-    c::rpmtransFree($trans);
-    c::rpmdbClose($db);
-    log::l("rpm database closed");
-
-    #- keep in mind removing of these packages by cleaning $toRemove.
-    @{$toRemove || []} = ();
-}
-
-sub selected_leaves {
-    my ($packages) = @_;
-    my %l;
-
-    #- initialize l with all id, not couting base package.
-    foreach my $id (0 .. $#{$packages->{depslist}}) {
-	my $pkg = packageById($packages, $id) or next;
-	packageSelectedOrInstalled($pkg) && !packageFlagBase($pkg) or next;
-	$l{$id} = 1;
-    }
-
-    foreach my $id (keys %l) {
-	#- when a package is in a choice, increase its value in hash l, because
-	#- it has to be examined before when we will select them later.
-	#- NB: this number may be computed before to save time.
-	my $p = $packages->{depslist}[$id] or next;
-	foreach (packageDepsId($p)) {
-	    if (/\|/) {
-		foreach (split '\|') {
-		    exists $l{$_} or next;
-		    $l{$_} > 1 + $l{$id} or $l{$_} = 1 + $l{$id};
-		}
-	    }
-	}
-    }
-
-    #- at this level, we can remove selected packages that are already
-    #- required by other, but we have to sort according to choice usage.
-    foreach my $id (sort { $l{$b} <=> $l{$a} || $b <=> $a } keys %l) {
-	#- do not count already deleted id, else cycles will be removed.
-	$l{$id} or next;
-
-	my $p = $packages->{depslist}[$id] or next;
-	foreach (packageDepsId($p)) {
-	    #- choices need no more to be examined, this has been done above.
-	    /\|/ and next;
-	    #- improve value of this one, so it will be selected before.
-	    $l{$id} < $l{$_} and $l{$id} = $l{$_};
-	    $l{$_} = 0;
-	}
-    }
-
-    #- now sort again according to decrementing value, and gives packages name.
-    [ map { packageName($packages->{depslist}[$_]) } sort { $l{$b} <=> $l{$a} } grep { $l{$_} > 0 } keys %l ];
-}
-
-
-sub naughtyServers {
-    my ($packages) = @_;
-
-    my @old_81 = qw(
-freeswan
-);
-    my @old_82 = qw(
-vnc-server
-postgresql-server
-mon
-);
-
-    my @new_80 = qw(
-jabber
-FreeWnn
-MySQL
-am-utils
-apache
-boa
-cfengine
-cups
-drakxtools-http
-finger-server
-imap
-leafnode
-lpr
-ntp
-openssh-server
-pidentd
-postfix
-proftpd
-rwall
-rwho
-squid
-webmin
-wu-ftpd
-ypbind
-); # nfs-utils-clients portmap
-   # X server
-
-    my @new_81 = qw(
-apache-mod_perl
-ftp-server-krb5
-mcserv
-samba
-telnet-server-krb5
-ypserv
-);
-
-    my @new_82 = qw(
-LPRng
-bind
-httpd-naat
-ibod
-inn
-netatalk
-nfs-utils
-rusers-server
-samba-swat
-tftp-server
-ucd-snmp
-);
-
-    my @naughtyServers = (@new_80, @new_81, @new_82);
-
-    grep {
-	my $p = packageByName($packages, $_);
-	$p && packageFlagSelected($p);
-    } @naughtyServers;
-}
-
-sub hashtree2list {
-    my ($e, $h) = @_;
-    my @l;
-    my @todo = $e;
-    while (@todo) {
-	my $e = shift @todo;
-	push @l, $e;
-	push @todo, @{$h->{$e}};
-    }
-    @l;
-}
-
-1;
diff --git a/perl-install/printer.pm b/perl-install/printer.pm
deleted file mode 100644
index c6478a2ad..000000000
--- a/perl-install/printer.pm
+++ /dev/null
@@ -1,2241 +0,0 @@
-package printer;
-
-# $Id$
-
-#use diagnostics;
-#use strict;
-
-
-use common;
-use run_program;
-
-#-if we are in an DrakX config
-my $prefix = "";
-
-#-location of the printer database in an installed system
-my $PRINTER_DB_FILE = "/usr/share/foomatic/db/compiled/overview.xml";
-#-configuration directory of Foomatic
-my $FOOMATICCONFDIR = "/etc/foomatic"; 
-#-location of the file containing the default spooler's name
-my $FOOMATIC_DEFAULT_SPOOLER = "$FOOMATICCONFDIR/defaultspooler";
-
-%spooler = (
-    _("CUPS - Common Unix Printing System") => "cups",
-    _("LPRng - LPR New Generation")         => "lprng",
-    _("LPD - Line Printer Daemon")          => "lpd",
-    _("PDQ - Print, Don't Queue")           => "pdq"
-#    _("PDQ - Marcia, click here!")           => "pdq"
-);
-%spooler_inv = reverse %spooler;
-
-%shortspooler = (
-    _("CUPS")   => "cups",
-    _("LPRng")  => "lprng",
-    _("LPD")    => "lpd",
-    _("PDQ")    => "pdq"
-);
-%shortspooler_inv = reverse %shortspooler;
-
-%lprcommand = (
-    "cups"   => "lpr-cups",
-    "lprng"  => "lpr-lpd",
-    "lpd"    => "lpr-lpd",
-    "pdq"    => "lpr-pdq"
-);
-
-%printer_type = (
-    _("Local printer")                              => "LOCAL",
-    _("Remote printer")                             => "REMOTE",
-    _("Printer on remote CUPS server")              => "CUPS",
-    _("Printer on remote lpd server")               => "LPD",
-    _("Network printer (TCP/Socket)")               => "SOCKET",
-    _("Printer on SMB/Windows 95/98/NT server")     => "SMB",
-    _("Printer on NetWare server")                  => "NCP",
-    _("Enter a printer device URI")                 => "URI",
-    _("Pipe job into a command")                    => "POSTPIPE"
-);
-%printer_type_inv = reverse %printer_type;
-
-#------------------------------------------------------------------------------
-
-sub set_prefix($) { $prefix = $_[0]; }
-
-sub default_printer_type($) { "LOCAL" }
-
-sub spooler {
-    # LPD is taken from the menu for the moment because the classic LPD is
-    # highly unsecure. Depending on how the GNU lpr development is going on
-    # LPD support can be reactivated by uncommenting the line which is
-    # commented out now.
-
-    #return @spooler_inv{qw(cups lpd lprng pdq)};
-    return @spooler_inv{qw(cups lprng pdq)};
-}
-
-sub printer_type($) {
-    my ($printer) = @_;
-    for ($printer->{SPOOLER}) {
-	/cups/ && return @printer_type_inv{qw(LOCAL), 
-					   qw(LPD SOCKET SMB), 
-					   $::expert ? qw(URI) : ()};
-	/lpd/  && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP),
-					   $::expert ? qw(POSTPIPE URI) : ()};
-	/lprng/  && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP),
-					   $::expert ? qw(POSTPIPE URI) : ()};
-	/pdq/  && return @printer_type_inv{qw(LOCAL LPD SOCKET),
-					   $::expert ? qw(URI) : ()};
-    }
-}
-
-sub get_default_spooler () {
-    if (-f "$prefix$FOOMATIC_DEFAULT_SPOOLER") {
-	open DEFSPOOL, "< $prefix$FOOMATIC_DEFAULT_SPOOLER";
-	my $spool = <DEFSPOOL>;
-	chomp $spool;
-	close DEFSPOOL;
-	return $spool if ($spool =~ /cups|lpd|lprng|pdq/); 
-    }
-}
-
-sub set_default_spooler ($) {
-    my ($printer) = @_;
-    # Make Foomatic config directory if it does not exist yet
-    mkdir "$prefix$FOOMATICCONFDIR" if (!(-d "$prefix$FOOMATICCONFDIR"));
-    # Mark the default driver in a file
-    open DEFSPOOL, "> $prefix$FOOMATIC_DEFAULT_SPOOLER" || 
-	die "Cannot create $prefix$FOOMATIC_DEFAULT_SPOOLER!";
-    print DEFSPOOL $printer->{SPOOLER};
-    close DEFSPOOL;
-}
-
-sub set_permissions {
-    my ($file, $perms, $owner, $group) = @_;
-    # We only need to set the permissions during installation to be able to
-    # print test pages. After installation the devfsd daemon does the business
-    # automatically.
-    if (!$::isInstall) {return 1;}
-    if ($owner && $group) {
-        run_program::rooted($prefix, "/bin/chown", "$owner.$group", $file)
-	    || die "Could not start chown!";
-    } elsif ($owner) {
-        run_program::rooted($prefix, "/bin/chown", $owner, $file)
-	    || die "Could not start chown!";
-    } elsif ($group) {
-        run_program::rooted($prefix, "/bin/chgrp", $group, $file)
-	    || die "Could not start chgrp!";
-    }
-    run_program::rooted($prefix, "/bin/chmod", $perms, $file)
-	|| die "Could not start chmod!";
-}
-
-sub restart_service ($) {
-    my ($service) = @_;
-    # Exit silently if the service is not installed
-    return 1 if (!(-x "$prefix/etc/rc.d/init.d/$service"));
-    run_program::rooted($prefix, "/etc/rc.d/init.d/$service", "restart");
-    if (($? >> 8) != 0) {
-	return 0;
-    } else {
-	# CUPS needs some time to come up.
-	wait_for_cups() if ($service eq "cups");
-	return 1;
-    }
-}
-
-sub start_service ($) {
-    my ($service) = @_;
-    # Exit silently if the service is not installed
-    return 1 if (!(-x "$prefix/etc/rc.d/init.d/$service"));
-    run_program::rooted($prefix, "/etc/rc.d/init.d/$service", "start");
-    if (($? >> 8) != 0) {
-	return 0;
-    } else {
-	# CUPS needs some time to come up.
-	wait_for_cups() if ($service eq "cups");
-	return 1;
-    }
-}
-
-sub stop_service ($) {
-    my ($service) = @_;
-    # Exit silently if the service is not installed
-    return 1 if (!(-x "$prefix/etc/rc.d/init.d/$service"));
-    run_program::rooted($prefix, "/etc/rc.d/init.d/$service", "stop");
-    if (($? >> 8) != 0) {return 0;} else {return 1;}
-}
-
-sub service_starts_on_boot ($) {
-    my ($service) = @_;
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"/bin/sh -c \"export LC_ALL=C; /sbin/chkconfig --list $service 2>&1\" |" ||
-	    return 0;
-    while (my $line = <F>) {
-	chomp $line;
-	if ($line =~ /:on/) {
-	    close F;
-	    return 1;
-	}
-    }
-    close F;
-    return 0;
-}
-
-sub start_service_on_boot ($) {
-    my ($service) = @_;
-    run_program::rooted($prefix, "/sbin/chkconfig", "--add", $service)
-	|| return 0;
-    return 1;
-}
-
-sub SIGHUP_daemon {
-    my ($service) = @_;
-    if ($service eq "cupsd") {$service = "cups"};
-    # PDQ has no daemon, exit.
-    if ($service eq "pdq") {return 1};
-    # CUPS needs auto-configuration
-    run_program::rooted($prefix, "/usr/sbin/setcupsconfig") if ($service eq "cups");
-    # Name of the daemon
-    my %daemons = (
-			    "lpr" => "lpd",
-			    "lpd" => "lpr",
-			    "lprng" => "lpd",
-			    "cups" => "cupsd",
-			    "devfs" => "devfsd",
-			    );
-    my $daemon = $deamons{$service};
-    $daemon = $service if (! defined $daemon);
-    if ($service eq "cups") {
-	# The current CUPS (1.1.13) dies on SIGHUP, to the normal restart.
-	restart_service($service);
-	# CUPS needs some time to come up.
-	wait_for_cups();
-    } else {
-	# Send the SIGHUP
-	run_program::rooted($prefix, "/usr/bin/killall", "-HUP", $daemon);
-    }
-    return 1;
-}
-
-sub wait_for_cups {
-    # CUPS needs some time to come up. Wait up to 30 seconds, checking
-    # whether CUPS is ready.
-    my $cupsready = 0;
-    my $i;
-    for ($i = 0; $i < 30; $i++) {
-	run_program::rooted($prefix, "/usr/bin/lpstat", "-r");
-	if (($? >> 8) != 0) {
-	    # CUPS is not ready, continue
-	    sleep 1;
-	} else {
-	    # CUPS is ready, quit
-	    $cupsready = 1;
-	    last;
-	}
-    }
-    return $cupsready;
-}
-
-sub assure_device_is_available_for_cups {
-    # Checks whether CUPS already "knows" a certain port, it does not
-    # know it usually when the appropriate kernel module is loaded
-    # after CUPS was started or when the printer is turned on after
-    # CUPS was started. CUPS 1.1.12 and newer refuses to set up queues
-    # on devices which it does not know, it points these queues to
-    # file:/dev/null instead. Restart CUPS if necessary to assure that
-    # CUPS knows the device.
-    my ($device) = @_;
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"/bin/sh -c \"export LC_ALL=C; /usr/sbin/lpinfo -v\" |" ||
-	    die "Could not run \"lpinfo\"!";
-    while (my $line = <F>) {
-	if ($line =~ /$device/) { # Found a line containing the device name,
-	                          # so CUPS knows it.
-	    close F;
-	    return 1;
-	}
-    }
-    close F;
-    return SIGHUP_daemon("cups");
-}
-
-sub network_running {
-    # If the network is not running return 0, otherwise 1.
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"/bin/sh -c \"export LC_ALL=C; /sbin/ifconfig\" |" ||
-	    die "Could not run \"ifconfig\"!";
-    while (my $line = <F>) {
-	if (($line !~ /^lo\s+/) && # The loopback device can have been 
-                                   # started by the spooler's startup script
-	    ($line =~ /^(\S+)\s+/)) { # In this line starts an entry for a
-	                              # running network
-	    close F;
-	    return 1;
-	}
-    }
-    close F;
-    return 0;
-}
-
-sub get_security_level {
-    # Get security level by reading /etc/profile (only after install).
-    # This is a preliminary solution until msec puts the security level
-    # definition into the correct file.
-    $file = "/etc/profile";
-    if (-f $file) {
-	local *F; 
-	open F, "< $file" || return 0;
-	while (my $line = <F>) {
-	    if ($line =~ /^\s*SECURE_LEVEL=([0-5])\s*$/) {
-		close F;
-		return $1;
-	    }
-	}
-	close F;
-    }
-    return 0;
-}
-    
-
-sub spooler_in_security_level {
-    # Was the current spooler already added to the current security level?
-    my ($spooler, $level) = @_;
-    my $sp;
-    $sp = (($spooler eq "lpr") || ($spooler eq "lprng")) ? "lpd" : $spooler;
-    $file = "$prefix/etc/security/msec/server.$level";
-    if (-f $file) {
-	local *F; 
-	open F, "< $file" || return 0;
-	while (my $line = <F>) {
-	    if ($line =~ /^\s*$sp\s*$/) {
-		close F;
-		return 1;
-	    }
-	}
-	close F;
-    }
-    return 0;
-}
-
-sub add_spooler_to_security_level {
-    my ($spooler, $level) = @_;
-    my $sp;
-    $sp = (($spooler eq "lpr") || ($spooler eq "lprng")) ? "lpd" : $spooler;
-    $file = "$prefix/etc/security/msec/server.$level";
-    if (-f $file) {
-	local *F; 
-	open F, ">> $file" || return 0;
-	print F "$sp\n";
-	close F;
-    }
-    return 1;
-}
-
-sub files_exist {
-    my @files = @_;
-    for my $file (@files) {
-	   return 0 if (! -f "$prefix$file"),
-    }
-    return 1;
-}
-
-sub set_alternative {
-    my ($command, $executable) = @_;
-    local *F;
-    # Read the list of executables for the given command to find the number
-    # of the desired executable
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"/bin/sh -c \"export LC_ALL=C; /bin/echo | update-alternatives --config $command \" |" ||
-	    die "Could not run \"update-alternatives\"!";
-    my $choice = 0;
-    while (my $line = <F>) {
-	chomp $line;
-	if ($line =~ m/^[\* ][\+ ]\s*([0-9]+)\s+(\S+)\s*$/) { # list entry?
-	    if ($2 eq $executable) {
-		$choice = $1;
-		last;
-	    }
-	}
-    }
-    close F;
-    # If the executable was found, assign the command to it
-    if ($choice > 0) {
-	system(($::testing ? "$prefix" : "chroot $prefix/ ") .
-	       "/bin/sh -c \"/bin/echo $choice | update-alternatives --config $command > /dev/null 2>&1\"");
-    }
-    return 1;
-}    
-
-sub pdq_panic_button {
-    my $setting = $_[0];
-    if (-f "/usr/sbin/pdqpanicbutton") {
-        run_program::rooted($prefix, "/usr/sbin/pdqpanicbutton", "--$setting")
-	    || die "Could not $setting PDQ panic buttons!";
-    }
-}
-
-sub copy_printer_params($$) {
-    my ($from, $to) = @_;
-    map { $to->{$_} = $from->{$_} } grep { $_ ne 'configured' } keys %$from; 
-    #- avoid cycles-----------------^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-}
-
-sub getinfo($) {
-    my ($prefix) = @_;
-    my $printer = {};
-    my @QUEUES;
-
-    set_prefix($prefix);
-
-    # Initialize $printer data structure
-    resetinfo($printer);
-
-    return $printer;
-}
-
-#------------------------------------------------------------------------------
-sub resetinfo($) {
-    my ($printer) = @_;
-    $printer->{QUEUE} = "";
-    $printer->{OLD_QUEUE} = "";
-    $printer->{OLD_CHOICE} = "";
-    $printer->{ARGS} = "";
-    $printer->{DBENTRY} = "";
-    $printer->{DEFAULT} = "";
-    $printer->{currentqueue} = {};
-    # -check which printing system was used previously and load the information
-    # -about its queues
-    read_configured_queues($printer);
-}
-
-sub read_configured_queues($) {
-    my ($printer) = @_;
-    my @QUEUES;
-    # Get the default spooler choice from the config file
-    $printer->{SPOOLER} ||= get_default_spooler();
-    if (!$printer->{SPOOLER}) {
-	#- Find the first spooler where there are queues
-	my $spooler;
-	for $spooler (qw(cups pdq lprng lpd)) {
-	    #- poll queue info 
-	    local *F; 
-	    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-		"foomatic-configure -P -q -s $spooler |" ||
-		    die "Could not run foomatic-configure";
-	    eval (join('',(<F>))); 
-	    close F;
-	    #- Have we found queues?
-	    if ($#QUEUES != -1) {
-		$printer->{SPOOLER} = $spooler;
-		last;
-	    }
-	}
-    } else {
-	#- Poll the queues of the current default spooler
-	local *F; 
-	open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	    "foomatic-configure -P -q -s $printer->{SPOOLER} |" ||
-		die "Could not run foomatic-configure";
-	eval (join('',(<F>))); 
-	close F;
-    }
-    $printer->{configured} = {};
-    my $i;
-    my $N = $#QUEUES + 1;
-    for ($i = 0;  $i < $N; $i++) {
-	$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}} = 
-	    $QUEUES[$i];
-	if ((!$QUEUES[$i]->{'make'}) || (!$QUEUES[$i]->{'model'})) {
-	    if ($printer->{SPOOLER} eq "cups") {
-		$printer->{OLD_QUEUE} = $QUEUES[$i]->{'queuedata'}{'queue'};
-		my $descr = get_descr_from_ppd($printer);
-		$descr =~ m/^([^\|]*)\|([^\|]*)\|.*$/;
-		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'make'} ||= $1;
-		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'model'} ||= $2;
-		# Read out which PPD file was originally used to set up this
-		# queue
-		local *F;
-		if (open F, "< $prefix/etc/cups/ppd/$QUEUES[$i]->{'queuedata'}{'queue'}.ppd") {
-		    while (my $line = <F>) {
-			if ($line =~ /^\*%MDKMODELCHOICE:(.+)$/) {
-			    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'ppd'} = $1;
-			}
-		    }
-		    close F;
-		}
-		# Mark that we have a CUPS queue but do not know the name
-		# the PPD file in /usr/share/cups/model
-		if (!$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'ppd'}) {
-		    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'ppd'} = '1';
-		}
-		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'driver'} = 'CUPS/PPD';
-		$printer->{OLD_QUEUE} = "";
-		# Read out the printer's options
-		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'args'} = read_cups_options($QUEUES[$i]->{'queuedata'}{'queue'});
-	    }
-	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'make'} ||= "";
-	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'model'} ||= _("Unknown model");
-	} else {
-	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'make'} = $QUEUES[$i]->{'make'};
-	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'model'} = $QUEUES[$i]->{'model'};
-	}
-	# Fill in "options" field
-	if (my $args = $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'args'}) {
-	    my $arg;
-	    my @options;
-	    for $arg (@{$args}) {
-		push(@options, "-o");
-		my $optstr = $arg->{'name'} . "=" . $arg->{'default'};
-		push(@options, $optstr);
-	    }
-	    @{$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{options}} = @options;
-	}
-	# Construct an entry line for tree view in main window of
-	# printerdrake
-	make_menuentry($printer, $QUEUES[$i]->{'queuedata'}{'queue'});
-    }
-}
-
-sub make_menuentry {
-    my ($printer, $queue) = @_;
-    my $spooler = $shortspooler_inv{$printer->{SPOOLER}};
-    my $connect = $printer->{configured}{$queue}{'queuedata'}{'connect'};
-    my $localremote;
-    if (($connect =~ m!^file:!) || ($connect =~ m!^ptal:/mlc:!)) {
-	$localremote = _("Local Printers");
-    } else {
-	$localremote = _("Remote Printers");
-    }
-    my $make = $printer->{configured}{$queue}{'queuedata'}{'make'};
-    my $model = $printer->{configured}{$queue}{'queuedata'}{'model'};
-    my $connection;
-    if ($connect =~ m!^file:/dev/lp(\d+)$!) {
-	my $number = $1;
-	$connection = _(" on parallel port \#%s", $number);
-    } elsif ($connect =~ m!^file:/dev/usb/lp(\d+)$!) {
-	my $number = $1;
-	$connection = _(", USB printer \#%s", $number);
-    } elsif ($connect =~ m!^ptal:/(.+)$!) {
-	my $ptaldevice = $1;
-	if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
-	    my $number = $1;
-	    $connection = _(", multi-function device on parallel port \#%s",
-			    $number);
-	} elsif ($ptaldevice =~ /^mlc:usb:/) {
-	    $connection = _(", multi-function device on USB");
-	} elsif ($ptaldevice =~ /^hpjd:/) {
-	    $connection = _(", multi-function device on HP JetDirect");
-	} else {
-	    $connection = _(", multi-function device");
-	}
-    } elsif ($connect =~ m!^file:(.+)$!) {
-	$connection = _(", printing to %s", $1);
-    } elsif ($connect =~ m!^lpd://([^/]+)/([^/]+)/?$!) {
-	$connection = _("on LPD server \"%s\", printer \"%s\"", $2, $1);
-    } elsif ($connect =~ m!^socket://([^/:]+):([^/:]+)/?$!) {
-	$connection = _(", TCP/IP host \"%s\", port %s", $1, $2);
-    } elsif (($connect =~ m!^smb://([^/\@]+)/([^/\@]+)/?$!) ||
-	     ($connect =~ m!^smb://.*/([^/\@]+)/([^/\@]+)/?$!) ||
-	     ($connect =~ m!^smb://.*\@([^/\@]+)/([^/\@]+)/?$!)) {
-	$connection = _("on Windows server \"%s\", share \"%s\"", $1, $2);
-    } elsif (($connect =~ m!^ncp://([^/\@]+)/([^/\@]+)/?$!) ||
-	     ($connect =~ m!^ncp://.*/([^/\@]+)/([^/\@]+)/?$!) ||
-	     ($connect =~ m!^ncp://.*\@([^/\@]+)/([^/\@]+)/?$!)) {
-	$connection = _("on Novell server \"%s\", printer \"%s\"", $1, $2);
-    } elsif ($connect =~ m!^postpipe:(.+)$!) {
-	$connection = _(", using command %s", $1);
-    } else {
-	$connection = ($::expert ? ", URI: $connect" : "");
-    }
-    my $sep = "!";
-    $printer->{configured}{$queue}{'queuedata'}{'menuentry'} = 
-	($::expert ? "$spooler$sep" : "") .
-	"$localremote$sep$queue: $make $model$connection";
-}
-
-sub read_printer_db(;$) {
-
-    my $spooler = $_[0];
-
-    my $dbpath = $prefix . $PRINTER_DB_FILE;
-
-    local $_; #- use of while (<...
-
-    local *DBPATH; #- don't have to do close ... and don't modify globals at least
-    # Generate the Foomatic printer/driver overview, read it from the
-    # appropriate file when it is already generated
-    if (!(-f $dbpath)) {
-	open DBPATH, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	    "foomatic-configure -O -q |" ||
-		die "Could not run foomatic-configure";
-    } else {
-	open DBPATH, $dbpath or die "An error occurred on $dbpath : $!";
-    }
-
-    my $entry = {};
-    my $inentry = 0;
-    my $indrivers = 0;
-    my $inautodetect = 0;
-    while (<DBPATH>) {
-	chomp;
-	if ($inentry) {
-	    # We are inside a printer entry
-	    if ($indrivers) {
-		# We are inside the drivers block of a printers entry
-		if (m!^\s*</drivers>\s*$!) {
-		    # End of drivers block
-		    $indrivers = 0;
-		} elsif (m!^\s*<driver>(.+)</driver>\s*$!) {
-		    push (@{$entry->{drivers}}, $1);
-		}
-	    } elsif ($inautodetect) {
-		# We are inside the autodetect block of a printers entry
-		# All entries inside this block will be ignored
-		if (m!^.*</autodetect>\s*$!) {
-		    # End of autodetect block
-		    $inautodetect = 0;
-		}
-	    } else {
-		if (m!^\s*</printer>\s*$!) {
-		    # entry completed
-		    $inentry = 0;
-		    # Expert mode:
-		    # Make one database entry per driver with the entry name
-		    # manufacturer|model|driver
-		    if ($::expert) {
-			my $driver;
-			for $driver (@{$entry->{drivers}}) {
-			    my $driverstr;
-			    if ($driver eq "Postscript") {
-				$driverstr = "PostScript";
-			    } else {
-				$driverstr = "GhostScript + $driver";
-			    }
-			    if ($driver eq $entry->{defaultdriver}) {
-				$driverstr .= " (recommended)";
-			    }
-			    $entry->{ENTRY} = "$entry->{make}|$entry->{model}|$driverstr";
-			    $entry->{driver} = $driver;
-			    # Duplicate contents of $entry because it is multiply entered to the database
-			    map { $thedb{$entry->{ENTRY}}->{$_} = $entry->{$_} } keys %$entry;
-			}
-		    } else {
-			# Recommended mode
-			# Make one entry per printer, with the recommended
-			# driver (manufacturerer|model)
-			$entry->{ENTRY} = "$entry->{make}|$entry->{model}";
-			if ($entry->{defaultdriver}) {
-			    $entry->{driver} = $entry->{defaultdriver};
-			    map { $thedb{$entry->{ENTRY}}->{$_} = $entry->{$_} } keys %$entry;
-			}
-		    }
-		    $entry = {};
-		} elsif (m!^\s*<id>\s*([^\s<>]+)\s*</id>\s*$!) {
-		    # Foomatic printer ID
-		    $entry->{printer} = $1;
-		} elsif (m!^\s*<make>(.+)</make>\s*$!) {
-		    # Printer manufacturer
-		    $entry->{make} = uc($1);
-		} elsif (m!^\s*<model>(.+)</model>\s*$!) {
-		    # Printer model
-		    $entry->{model} = $1;
-		} elsif (m!<driver>(.+)</driver>!) {
-		    # Printer default driver
-		    $entry->{defaultdriver} = $1;
-		} elsif (m!^\s*<drivers>\s*$!) {
-		    # Drivers block
-		    $indrivers = 1;
-		    @{$entry->{drivers}} = (); 
-		} elsif (m!^\s*<autodetect>\s*$!) {
-		    # Autodetect block
-		    $inautodetect = 1;
-		}
-	    }
-	} else {
-	    if (m!^\s*<printer>\s*$!) {
-		# new entry
-		$inentry = 1;
-	    }
-	}
-    }
-    close DBPATH;
-
-    # Add raw queue
-    if ($spooler ne "pdq") {
-	$entry->{ENTRY} = _("Raw printer (No driver)");
-	$entry->{driver} = "raw";
-	$entry->{make} = "";
-	$entry->{model} = _("Unknown model");
-	map { $thedb{$entry->{ENTRY}}->{$_} = $entry->{$_} } keys %$entry;
-    }
-
-    #- Load CUPS driver database if CUPS is used as spooler
-    if (($spooler) && ($spooler eq "cups") && ($::expert)) {
-
-	#&$install('cups-drivers') unless $::testing;
-	#my $w;
-	#if ($in) {
-	#    $w = $in->wait_message(_("CUPS starting"),
-	#			   _("Reading CUPS drivers database..."));
-	#}
-        poll_ppd_base();
-    }
-
-    @entries_db_short     = sort keys %printer::thedb;
-    #%descr_to_db          = map { $printer::thedb{$_}{DESCR}, $_ } @entries_db_short;
-    #%descr_to_help        = map { $printer::thedb{$_}{DESCR}, $printer::thedb{$_}{ABOUT} } @entries_db_short;
-    #@entry_db_description = keys %descr_to_db;
-    #db_to_descr          = reverse %descr_to_db;
-
-}
-
-sub read_foomatic_options ($) {
-    my ($printer) = @_;
-    # Generate the option data for the chosen printer/driver combo
-    my $COMBODATA;
-    local *F;
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"foomatic-configure -P -q -p $printer->{currentqueue}{'printer'}" .
-	    " -d $printer->{currentqueue}{'driver'}" . 
-		($printer->{OLD_QUEUE} ?
-		  " -s $printer->{SPOOLER} -n $printer->{OLD_QUEUE}" : "") .
-		($printer->{SPECIAL_OPTIONS} ?
-		  " $printer->{SPECIAL_OPTIONS}" : "") 
-		    . " |" ||
-	    die "Could not run foomatic-configure";
-    eval (join('',(<F>))); 
-    close F;
-    # Return the arguments field
-    return $COMBODATA->{'args'};
-}
-
-sub read_cups_options ($) {
-    my ($queue_or_file) = @_;
-    # Generate the option data from a CUPS PPD file/a CUPS queue
-    # Use the same Perl data structure as Foomatic uses to be able to
-    # reuse the dialog
-    local *F;
-    if ($queue_or_file =~ /.ppd.gz$/) { # compressed PPD file
-	open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	    "gunzip -cd $queue_or_file | lphelp - |" || return 0;
-    } else { # PPD file not compressed or queue
-	open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	    "lphelp $queue_or_file |" || return 0;
-    }
-    my $i;
-    my $j;
-    my @args = ();
-    my $line;
-    my $inoption = 0;
-    my $inchoices = 0;
-#    my $innumerical = 0;
-    while ($line = <F>) {
-	chomp $line;
-	if ($inoption) {
-	    if ($inchoices) {
-		if ($line =~ /^\s*(\S+)\s+(\S.*)$/) {
-		    push(@{$args[$i]{vals}}, {});
-		    $j = $#{$args[$i]{vals}};
-		    $args[$i]{vals}[$j]{value} = $1;
-		    my $comment = $2;
-		    # Did we find the default setting?
-		    if ($comment =~ /default\)\s*$/) {
-			$args[$i]{default} = $args[$i]{vals}[$j]{value};
-			$comment =~ s/,\s*default\)\s*$//;
-		    } else {
-			$comment =~ s/\)\s*$//;
-		    }
-		    # Remove opening paranthese
-		    $comment =~ s/^\(//;
-		    # Remove page size info
-		    $comment =~ s/,\s*size:\s*[0-9\.]+x[0-9\.]+in$//;
-		    $args[$i]{vals}[$j]{comment} = $comment;
-		} elsif (($line =~ /^\s*$/) && ($#{$args[$i]{vals}} > -1)) {
-		    $inchoices = 0;
-		    $inoption = 0;
-		}
-#	    } elsif ($innumerical == 1) {
-#		if ($line =~ /^\s*The default value is ([0-9\.]+)\s*$/) {
-#		    $args[$i]{default} = $1;
-#		    $innumerical = 0;
-#		    $inoption = 0;
-#		}
-	    } else {
-		if ($line =~ /^\s*<choice>/) {
-		    $inchoices = 1;
-#		} elsif ($line =~ /^\s*<value> must be a(.*) number in the range ([0-9\.]+)\.\.([0-9\.]+)\s*$/) {
-#		    delete($args[$i]{vals});
-#		    $args[$i]{min} = $2;
-#		    $args[$i]{max} = $3;
-#		    my $type = $1;
-#		    if ($type =~ /integer/) {
-#			$args[$i]{type} = 'int';
-#		    } else {
-#			$args[$i]{type} = 'float';
-#		    }
-#		    $innumerical = 1;
-		}
-	    }
-	} else {
-	    if ($line =~ /^\s*([^\s:][^:]*):\s+-o\s+([^\s=]+)=<choice>\s*$/) {
-#	    if ($line =~ /^\s*([^\s:][^:]*):\s+-o\s+([^\s=]+)=<.*>\s*$/) {
-		$inoption = 1;
-		push(@args, {});
-		$i = $#args;
-		$args[$i]{comment} = $1;
-		$args[$i]{name} = $2;
-		$args[$i]{type} = 'enum';
-		@{$args[$i]{vals}} = ();
-	    }
-	}
-    }
-    close F;
-    # Return the arguments field
-    return \@args;
-}
-
-#------------------------------------------------------------------------------
-
-sub read_cups_printer_list {
-    my ($printer) = $_[0];
-    # This function reads in a list of all printers which the local CUPS
-    # daemon currently knows, including remote ones.
-    local *F;
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"lpstat -v |" || return ();
-    my @printerlist = ();
-    my $line;
-    while ($line = <F>) {
-	if ($line =~ m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) {
-	    my $queuename = $1;
-	    my $comment = "";
-	    if (($2 =~ m!^ipp://([^/:]+)[:/]!) &&
-		(!$printer->{configured}{$queuename})) {
-		$comment = _("(on %s)", $1);
-	    } else {
-		$comment = _("(on this machine)");
-	    }
-	    push (@printerlist, "$queuename $comment");
-	}
-    }
-    close F;
-    return @printerlist;
-}
-
-sub get_cups_remote_queues {
-    my ($printer) = $_[0];
-    # This function reads in a list of all remote printers which the local 
-    # CUPS daemon knows due to broadcasting of remote servers or 
-    # "BrowsePoll" entries in the local /etc/cups/cupsd.conf/
-    local *F;
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"lpstat -v |" || return ();
-    my @printerlist = ();
-    my $line;
-    while ($line = <F>) {
-	if ($line =~ m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) {
-	    my $queuename = $1;
-	    my $comment = "";
-	    if (($2 =~ m!^ipp://([^/:]+)[:/]!) &&
-		(!$printer->{configured}{$queuename})) {
-		$comment = _("On CUPS server \"%s\"", $1);
-		my $sep = "!";
-		push (@printerlist,
-		      ($::expert ? _("CUPS") . $sep : "") .
-		      _("Remote Printers") . "$sep$queuename: $comment"
-		      . ($queuename eq $printer->{DEFAULT} ?
-			 _(" (Default)") : ("")));
-	    }
-	}
-    }
-    close F;
-    return @printerlist;
-}
-
-sub set_cups_autoconf {
-    my $autoconf = $_[0];
-
-    # Read config file
-    local *F;
-    my $file = "$prefix/etc/sysconfig/printing";
-    if (!(-f $file)) {
-	@file_content = ();
-    } else {
-	open F, "< $file" or die "Cannot open $file!";
-	@file_content = <F>;
-	close F;
-    }
-
-    # Remove all valid "CUPS_CONFIG" lines
-    ($_ =~ /^\s*CUPS_CONFIG/ and $_="") foreach @file_content;
- 
-    # Insert the new "Printcap" line
-    if ($autoconf) {
-	push @file_content, "CUPS_CONFIG=automatic\n";
-    } else {
-	push @file_content, "CUPS_CONFIG=manual\n";
-    }
-
-    # Write back modified file
-    open F, "> $file" or die "Cannot open $file!";
-    print F @file_content;
-    close F;
-
-    # Restart CUPS
-    restart_service("cups");
-
-    return 1;
-}
-
-sub get_cups_autoconf {
-    local *F;
-    open F, ("< $prefix/etc/sysconfig/printing") || return 1;
-    my $line;
-    while ($line = <F>) {
-	if ($line =~ m!^[^\#]*CUPS_CONFIG=manual!) {
-	    return 0;
-	}
-    }
-    return 1;
-}
-
-sub set_default_printer {
-    my ($printer) = $_[0];
-    run_program::rooted($prefix, "foomatic-configure",
-			"-D", "-q", "-s", $printer->{SPOOLER},
-			"-n", $printer->{DEFAULT}) || return 0;
-    return 1;
-}
-
-sub get_default_printer {
-    my $printer = $_[0];
-    local *F;
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"foomatic-configure -Q -q -s $printer->{SPOOLER} |" || return undef;
-    my $line;
-    while ($line = <F>) {
-	if ($line =~ m!^\s*<defaultqueue>(.*)</defaultqueue>\s*$!) {
-	    return $1;
-	}
-    }
-    return undef;
-}
-
-sub read_cupsd_conf {
-    my @cupsd_conf;
-    local *F;
-
-    open F, "$prefix/etc/cups/cupsd.conf";
-    @cupsd_conf = <F>;
-    close F;
-
-    @cupsd_conf;
-}
-sub write_cupsd_conf {
-    my (@cupsd_conf) = @_;
-    local *F;
-
-    open F, ">$prefix/etc/cups/cupsd.conf";
-    print F @cupsd_conf;
-    close F;
-
-    #- restart cups after updating configuration.
-    restart_service("cups");
-}
-
-sub read_printers_conf {
-    my ($printer) = @_;
-    my $current = undef;
-
-    #- read /etc/cups/printers.conf file.
-    #- according to this code, we are now using the following keys for each queues.
-    #-    DeviceURI > lpd://printer6/lp
-    #-    Info      > Info Text
-    #-    Location  > Location Text
-    #-    State     > Idle|Stopped
-    #-    Accepting > Yes|No
-    local *PRINTERS; open PRINTERS, "$prefix/etc/cups/printers.conf" or return;
-    local $_;
-    while (<PRINTERS>) {
-	chomp;
-	/^\s*#/ and next;
-	if (/^\s*<(?:DefaultPrinter|Printer)\s+([^>]*)>/) { $current = { mode => 'cups', QUEUE => $1, } }
-	elsif (/\s*<\/Printer>/) { $current->{QUEUE} && $current->{DeviceURI} or next; #- minimal check of synthax.
-				   add2hash($printer->{configured}{$current->{QUEUE}} ||= {}, $current); $current = undef }
-	elsif (/\s*(\S*)\s+(.*)/) { $current->{$1} = $2 }
-    }
-    close PRINTERS;
-
-    #- assume this printing system.
-    $printer->{SPOOLER} ||= 'cups';
-}
-
-sub get_direct_uri {
-    #- get the local printer to access via a Device URI.
-    my @direct_uri;
-    local *F; open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/sbin/lpinfo -v |";
-    local $_;
-    while (<F>) {
-	/^(direct|usb|serial)\s+(\S*)/ and push @direct_uri, $2;
-    }
-    close F;
-    @direct_uri;
-}
-
-sub get_descr_from_ppd {
-    my ($printer) = @_;
-    my %ppd;
-
-    #- if there is no ppd, this means this is a raw queue.
-    local *F; open F, "$prefix/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd" or return "|" . _("Unknown model");
-    # "OTHERS|Generic PostScript printer|PostScript (en)";
-    local $_;
-    while (<F>) {
-	/^\*([^\s:]*)\s*:\s*\"([^\"]*)\"/ and do { $ppd{$1} = $2; next };
-	/^\*([^\s:]*)\s*:\s*([^\s\"]*)/   and do { $ppd{$1} = $2; next };
-    }
-    close F;
-
-    my $descr = ($ppd{NickName} || $ppd{ShortNickName} || $ppd{ModelName});
-    # Apply the beautifying rules of poll_ppd_base
-    if ($descr =~ /Foomatic \+ Postscript/) {
-	$descr =~ s/Foomatic \+ Postscript/PostScript/;
-    } elsif ($descr =~ /Foomatic/) {
-	$descr =~ s/Foomatic/GhostScript/;
-    } elsif ($descr =~ /CUPS\+GIMP-print/) {
-	$descr =~ s/CUPS\+GIMP-print/CUPS \+ GIMP-Print/;
-    } elsif ($descr =~ /Series CUPS/) {
-	$descr =~ s/Series CUPS/Series, CUPS/;
-    } elsif (!(uc($descr) =~ /POSTSCRIPT/)) {
-	$descr .= ", PostScript";
-    }
-
-    # Split the $descr into model and driver
-    my $model;
-    my $driver;
-    if ($descr =~ /^([^,]+), (.*)$/) {
-	$model = $1;
-	$driver = $2;
-    } else {
-	# Some PPDs do not have the ", <driver>" part.
-	$model = $descr;
-	$driver = "PostScript";
-    }
-    my $make = $ppd{Manufacturer};
-    my $lang = $ppd{LanguageVersion};
-
-    # Remove manufacturer's name from the beginning of the model name
-    if (($make) && ($model =~ /^$make[\s\-]+([^\s\-].*)$/)) {
-	$model = $1;
-    }
-
-    # Put out the resulting description string
-    uc($make) . '|' . $model . '|' . $driver .
-      ($lang && (" (" . lc(substr($lang, 0, 2)) . ")"));
-}
-
-sub poll_ppd_base {
-    #- before trying to poll the ppd database available to cups, we have to make sure
-    #- the file /etc/cups/ppds.dat is no more modified.
-    #- if cups continue to modify it (because it reads the ppd files available), the
-    #- poll_ppd_base program simply cores :-)
-    run_program::rooted($prefix, "ifconfig lo 127.0.0.1"); #- else cups will not be happy! and ifup lo don't run ?
-    start_service("cups");
-    my $driversthere = scalar(keys %thedb);
-    foreach (1..60) {
-	local *PPDS; open PPDS, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/bin/poll_ppd_base -a |";
-	local $_;
-	while (<PPDS>) {
-	    chomp;
-	    my ($ppd, $mf, $descr, $lang) = split /\|/;
-	    if ($ppd eq "raw") {next;}
-	    my ($model, $driver);
-	    if ($descr) {
-		if ($descr =~ /^([^,]+), (.*)$/) {
-		    $model = $1;
-		    $driver = $2;
-		} else {
-		    # Some PPDs do not have the ", <driver>" part.
-		    $model = $descr;
-		    $driver = "PostScript";
-		}
-	    }
-	    # Rename Canon "BJC XXXX" models into "BJC-XXXX" so that the models
-	    # do not appear twice
-	    if ($mf eq "CANON") {
-		$model =~ s/BJC\s+/BJC-/;
-	    }
-	    $ppd && $mf && $descr and do {
-		my $key = "$mf|$model|$driver" . ($lang && " ($lang)");
-	        $thedb{$key}{ppd} = $ppd;
-		$thedb{$key}{driver} = $driver;
-		$thedb{$key}{make} = $mf;
-		$thedb{$key}{model} = $model;
-	    }
-	}
-	close PPDS;
-	scalar(keys %thedb) - $driversthere > 5 and last;
-	#- we have to try again running the program, wait here a little before.
-	sleep 1; 
-    }
-
-    #scalar(keys %descr_to_ppd) > 5 or die "unable to connect to cups server";
-
-}
-
-
-
-#-******************************************************************************
-#- write functions
-#-******************************************************************************
-
-sub configure_queue($) {
-    my ($printer) = @_;
-    local *F;
-
-    if ($printer->{currentqueue}{foomatic}) {
-	#- Create the queue with "foomatic-configure", in case of queue
-	#- renaming copy the old queue
-        run_program::rooted($prefix, "foomatic-configure", "-q",
-			    "-s", $printer->{currentqueue}{'spooler'},
-			    "-n", $printer->{currentqueue}{'queue'},
-			    (($printer->{currentqueue}{'queue'} ne 
-			      $printer->{OLD_QUEUE}) &&
-			     ($printer->{configured}{$printer->{OLD_QUEUE}}) ?
-			     ("-C", $printer->{OLD_QUEUE}) : ()),
-			    "-c", $printer->{currentqueue}{'connect'},
-			    "-p", $printer->{currentqueue}{'printer'},
-			    "-d", $printer->{currentqueue}{'driver'},
-			    "-N", $printer->{currentqueue}{'desc'},
-			    "-L", $printer->{currentqueue}{'loc'},
-			    @{$printer->{currentqueue}{options}}
-			    ) or die "foomatic-configure failed";
-    } elsif ($printer->{currentqueue}{ppd}) {
-	#- If the chosen driver is a PPD file from /usr/share/cups/model,
-	#- we use lpadmin to set up the queue
-        run_program::rooted($prefix, "lpadmin",
-			    "-p", $printer->{currentqueue}{'queue'},
-#			    $printer->{State} eq 'Idle' && 
-#			        $printer->{Accepting} eq 'Yes' ? ("-E") : (),
-			    "-E",
-			    "-v", $printer->{currentqueue}{'connect'},
-			    ($printer->{currentqueue}{'ppd'} ne '1') ?
-			        ("-m", $printer->{currentqueue}{'ppd'}) : (),
-			    $printer->{currentqueue}{'desc'} ?
-			        ("-D", $printer->{currentqueue}{'desc'}) : (),
-			    $printer->{currentqueue}{'loc'} ? 
-			        ("-L", $printer->{currentqueue}{'loc'}) : (),
-			    @{$printer->{currentqueue}{options}}
-			    ) or die "lpadmin failed";
-	# Add a comment line containing the path of the used PPD file to the
-	# end of the PPD file
-	if ($printer->{currentqueue}{'ppd'} ne '1') {
-	    open F, ">> $prefix/etc/cups/ppd/$printer->{currentqueue}{'queue'}.ppd";
-	    print F "*%MDKMODELCHOICE:$printer->{currentqueue}{'ppd'}\n";
-	    close F;
-	}
-	# Copy the old queue's PPD file to the new queue when it is renamed,
-	# to conserve the option settings
-	if (($printer->{currentqueue}{'queue'} ne 
-	     $printer->{OLD_QUEUE}) &&
-	    ($printer->{configured}{$printer->{OLD_QUEUE}})) {
-	    system("echo yes | cp -f " .
-		   "$prefix/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd " .
-		   "$prefix/etc/cups/ppd/$printer->{currentqueue}{'queue'}.ppd");
-	}
-    } else {
-	# Raw queue
-        run_program::rooted($prefix, "foomatic-configure", "-q",
-			    "-s", $printer->{currentqueue}{'spooler'},
-			    "-n", $printer->{currentqueue}{'queue'},
-			    "-c", $printer->{currentqueue}{'connect'},
-			    "-d", $printer->{currentqueue}{'driver'},
-			    "-N", $printer->{currentqueue}{'desc'},
-			    "-L", $printer->{currentqueue}{'loc'}
-			    ) or die "foomatic-configure failed";
-    }	  
-
-    # Make sure that queue is active
-    if ($printer->{SPOOLER} ne "pdq") {
-        run_program::rooted($prefix, "foomatic-printjob",
-			    "-s", $printer->{currentqueue}{'spooler'},
-			    "-C", "up", $printer->{currentqueue}{'queue'});
-    }
-
-    # Check whether a USB printer is configured and activate USB printing if so
-    my $useUSB = 0;
-    foreach (values %{$printer->{configured}}) {
-	$useUSB ||= $_->{'queuedata'}{'connect'} =~ /usb/ || 
-	    $_->{DeviceURI} =~ /usb/;
-    }
-    $useUSB ||= ($printer->{currentqueue}{'queue'}{'queuedata'}{'connect'}
-		 =~ /usb/);
-    if ($useUSB) {
-	my $f = "$prefix/etc/sysconfig/usb";
-	my %usb = getVarsFromSh($f);
-	$usb{PRINTER} = "yes";
-	setVarsInSh($f, \%usb);
-    }
-
-    # Open permissions for device file when PDQ is chosen as spooler
-    # so normal users can print.
-    if ($printer->{SPOOLER} eq 'pdq') {
-	if ($printer->{currentqueue}{'connect'} =~ m!^\s*file:(\S*)\s*$!) {
-	    set_permissions($1,"666");
-	}
-    }
-
-    # Make a new printer entry in the $printer structure
-    $printer->{configured}{$printer->{currentqueue}{'queue'}}{'queuedata'} =
-        {};
-    copy_printer_params($printer->{currentqueue},
-      $printer->{configured}{$printer->{currentqueue}{'queue'}}{'queuedata'});
-    # Construct an entry line for tree view in main window of
-    # printerdrake
-    make_menuentry($printer, $printer->{currentqueue}{'queue'});
-
-    # Store the default option settings
-    $printer->{configured}{$printer->{currentqueue}{'queue'}}{'args'} = {};
-    if ($printer->{currentqueue}{foomatic}) {
-	my $tmp = $printer->{OLD_QUEUE};
-	$printer->{OLD_QUEUE} = $printer->{currentqueue}{'queue'};
-	$printer->{configured}{$printer->{currentqueue}{'queue'}}{'args'} = 
-	    read_foomatic_options($printer);
-	$printer->{OLD_QUEUE} = $tmp;
-    } elsif ($printer->{currentqueue}{ppd}) {
-	$printer->{configured}{$printer->{currentqueue}{'queue'}}{'args'} =
-	    read_cups_options($printer->{currentqueue}{'queue'});
-    }
-    # Clean up
-    delete($printer->{ARGS});
-    $printer->{OLD_CHOICE} = "";
-    $printer->{ARGS} = {};
-    $printer->{DBENTRY} = "";
-    $printer->{currentqueue} = {};
-}
-
-sub remove_queue($$) {
-    my ($printer) = $_[0];
-    my ($queue) = $_[1];
-    run_program::rooted($prefix, "foomatic-configure", "-R", "-q",
-			"-s", $printer->{SPOOLER},
-			"-n", $queue);
-    # Delete old stuff from data structure
-    delete $printer->{configured}{$queue};
-    delete($printer->{currentqueue});
-    delete($printer->{ARGS});
-    $printer->{OLD_CHOICE} = "";
-    $printer->{ARGS} = {};
-    $printer->{DBENTRY} = "";
-    $printer->{currentqueue} = {};
-    removeprinterfromapplications($printer, $queue);
-}
-
-sub restart_queue($) {
-    my ($printer) = @_;
-    my $queue = $printer->{QUEUE};
-
-    # Restart the daemon(s)
-    for ($printer->{SPOOLER}) {
-	/cups/ && do {
-	    #- restart cups.
-	    restart_service("cups");
-	    last };
-	/lpr|lprng/ && do {
-	    #- restart lpd.
-	    foreach (("/var/spool/lpd/$queue/lock", "/var/spool/lpd/lpd.lock")) {
-		my $pidlpd = (cat_("$prefix$_"))[0];
-		kill 'TERM', $pidlpd if $pidlpd;
-		unlink "$prefix$_";
-	    }
-	    restart_service("lpd"); sleep 1;
-	    last };
-    }
-    # Kill the jobs
-    run_program::rooted($prefix, "foomatic-printjob", "-R",
-			"-s", $printer->{SPOOLER},
-			"-P", $queue, "-");
-
-}
-
-sub print_pages($@) {
-    my ($printer, @pages) = @_;
-    my $queue = $printer->{QUEUE};
-    my $lpr = "/usr/bin/foomatic-printjob";
-    my $lpq = "$lpr -Q";
-
-    # Print the pages
-    foreach (@pages) {
-	my $page = $_;
-	# Only text and PostScript can be printed directly with all spoolers,
-	# images must be treated seperately
-	if ($page =~ /\.jpg$/) {
-	    system(($::testing ? "$prefix" : "chroot $prefix/ ") .
-		   "/usr/bin/convert $page -page 427x654+100+65 PS:- | " .
-		   ($::testing ? "$prefix" : "chroot $prefix/ ") .
-		   "$lpr -s $printer->{SPOOLER} -P $queue");
-	} else {
-	    run_program::rooted($prefix, $lpr, "-s", $printer->{SPOOLER},
-				"-P", $queue, $page);
-	}
-    }
-    sleep 5; #- allow lpr to send pages.
-    # Check whether the job is queued
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "$lpq -s $printer->{SPOOLER} -P $queue |";
-    my @lpq_output =
-	grep { !/^no entries/ && !(/^Rank\s+Owner/ .. /^\s*$/) } <F>;
-    close F;
-    @lpq_output;
-}
-
-sub lphelp_output {
-    my ($printer) = @_;
-    my $queue = $printer->{QUEUE};
-    my $lphelp = "/usr/bin/lphelp";
-
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "$lphelp $queue |";
-    $helptext = join("", <F>);
-    close F;
-    if (!$helptext || ($helptext eq "")) {
-	$helptext = "Option list not available!\n";
-    }
-    return $helptext;
-}
-
-sub pdqhelp_output {
-    my ($printer) = @_;
-    my $queue = $printer->{QUEUE};
-    my $pdq = "/usr/bin/pdq";
-
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "$pdq -h -P $queue  2>&1 |";
-    $helptext = join("", <F>);
-    close F;
-    return $helptext;
-}
-
-sub print_optionlist {
-    my ($printer) = @_;
-    my $queue = $printer->{QUEUE};
-    my $lpr = "/usr/bin/foomatic-printjob";
-
-    # Print the option list pages
-    if ($printer->{configured}{$queue}{queuedata}{foomatic}) {
-        run_program::rooted($prefix, $lpr, "-s", $printer->{SPOOLER},
-			    "-P", $queue, "-o", "docs",
-			    "/etc/bashrc");
-    } elsif ($printer->{configured}{$queue}{queuedata}{ppd}) {
-	system(($::testing ? "$prefix" : "chroot $prefix/ ") .
-	       "/usr/bin/lphelp $queue | " .
-	       ($::testing ? "$prefix" : "chroot $prefix/ ") .
-	       "$lpr -s $printer->{SPOOLER} -P $queue");
-    }
-}
-
-# ---------------------------------------------------------------
-#
-# Spooler config stuff
-#
-# ---------------------------------------------------------------
-
-sub get_copiable_queues {
-    my ($oldspooler, $newspooler) = @_;
-    local $_; #- use of while (<...
-
-    local *QUEUEOUTPUT; #- don't have to do close ... and don't modify globals
-                        #- at least
-    my @queuelist;      #- here we will list all Foomatic-generated queues
-    # Get queue list with foomatic-configure
-    open QUEUEOUTPUT, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	    "foomatic-configure -Q -q -s $oldspooler |" ||
-		die "Could not run foomatic-configure";
-
-    my $entry = {};
-    my $inentry = 0;
-    while (<QUEUEOUTPUT>) {
-	chomp;
-	if ($inentry) {
-	    # We are inside a queue entry
-	    if (m!^\s*</queue>\s*$!) {
-		# entry completed
-		$inentry = 0;
-		if (($entry->{foomatic}) && 
-		    ($entry->{spooler} eq $oldspooler)) {
-		    # Is the connection type supported by the new
-		    # spooler?
-		    if ((($newspooler eq "cups") &&
-			 (($entry->{connect} =~ /^file:/) ||
-			  ($entry->{connect} =~ /^ptal:/) ||
-			  ($entry->{connect} =~ /^lpd:/) ||
-			  ($entry->{connect} =~ /^socket:/) ||
-			  ($entry->{connect} =~ /^smb:/) ||
-			  ($entry->{connect} =~ /^ipp:/))) ||
-			((($newspooler eq "lpd") ||
-			  ($newspooler eq "lprng")) &&
-			 (($entry->{connect} =~ /^file:/) ||
-			  ($entry->{connect} =~ /^ptal:/) ||
-			  ($entry->{connect} =~ /^lpd:/) ||
-			  ($entry->{connect} =~ /^socket:/) ||
-			  ($entry->{connect} =~ /^smb:/) ||
-			  ($entry->{connect} =~ /^ncp:/) ||
-			  ($entry->{connect} =~ /^postpipe:/))) ||
-			(($newspooler eq "pdq") &&
-			 (($entry->{connect} =~ /^file:/) ||
-			  ($entry->{connect} =~ /^ptal:/) ||
-			  ($entry->{connect} =~ /^lpd:/) ||
-			  ($entry->{connect} =~ /^socket:/)))) {
-			push(@queuelist, $entry->{name});
-		    }
-		}
-		$entry = {};
-	    } elsif (m!^\s*<name>(.+)</name>\s*$!) {
-		    # queue name
-		    $entry->{name} = $1;
-	    } elsif (m!^\s*<connect>(.+)</connect>\s*$!) {
-		    # connection type (URI)
-		    $entry->{connect} = $1;
-	    }
-	} else {
-	    if (m!^\s*<queue\s+foomatic\s*=\s*\"?(\d+)\"?\s*spooler\s*=\s*\"?(\w+)\"?\s*>\s*$!) {
-		# new entry
-		$inentry = 1;
-		$entry->{foomatic} = $1;
-		$entry->{spooler} = $2;
-	    }
-	}
-    }
-    close QUEUEOUTPUT;
-    
-    return @queuelist;
-}
-
-sub copy_foomatic_queue {
-    my ($printer, $oldqueue, $oldspooler, $newqueue) = @_;
-    run_program::rooted($prefix, "foomatic-configure", "-q",
-			"-s", $printer->{SPOOLER},
-			"-n", $newqueue,
-			"-C", $oldspooler, $oldqueue);
-}
-
-# ------------------------------------------------------------------
-#
-# Configuration of HP multi-function devices
-#
-# ------------------------------------------------------------------
-
-sub configure_hpoj {
-    my ($device, @autodetected) = @_;
-    # Get the model ID as auto-detected
-    $device =~ m!^/dev/\S*lp(\d+)$!;
-    my $model = $1;
-    my $device_ok = 1;
-    foreach (@autodetected) {
-	$device eq $_->{port} or next;
-	$model = $_->{val}{MODEL};
-	# Check if the device is really an HP multi-function device
-	stop_service("hpoj");
-	my $bus;
-	my $address_arg = "";
-	if ($device =~ /usb/) {
-	    $bus = "usb";
-	} else {
-	    $bus = "par";
-	    $address_arg = parport_addr($device);
-	}
-	run_program::rooted($prefix, 
-			    "ptal-mlcd", "$bus:probe", "-device", 
-			    "$device", split(' ',$address_arg));
-	$device_ok = 0;
-	local *F; 
-	if (open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/bin/ptal-devid mlc:$bus:probe |") {
-	    my $devid = join("", <F>);
-	    close F;
-	    if ($devid) {$device_ok = 1};
-	}
-	if (open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "ps auxwww | grep \"ptal-mlcd $bus:probe\" | grep -v grep | ") {
-	    my $line = <F>;
-	    if ($line =~ /^\s*\S+\s+(\d+)\s+/) {
-		my $pid = $1;
-		kill (15, $pid);
-	    }
-	    close F;
-	}
-	start_service("hpoj");
-	last;
-    }
-    # No, it is not an HP multi-function device.
-    return "" if (!$device_ok);
-    #$device = "/dev/usb/lp1"; $model = "DeskJet 990C";
-    # Read the HPOJ config file and check whether this device is already
-    # configured
-    my $deviceconfigured = 0;
-    my $ptaldevice;
-    my $hpoj_config = "/etc/ptal-start.conf";
-    local *HPOJCONFIG; 
-    if (open HPOJCONFIG, ("< $prefix$hpoj_config")) {
-	while ($line = <HPOJCONFIG>) {
-	    chomp $line;
-	    # Comment or blank line
-	    next if (($line =~ /^\s*\#/) || ($line =~ /^\s*$/));
-	    # Only lines beginning with "ptal-mlcd" are interesting.
-	    next if ($line !~ /^\s*ptal-mlcd\s+(\S+)\s+/);
-	    $ptaldevice = "mlc:$1";
-	    if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
-		# Parallel device
-		next if ($device =~ /usb/);
-		if ($line =~ m!-device\s+$device!) {
-		    # Our new device is parallel and already configured
-		    # by the current line
-		    $deviceconfigured = 1;
-		    last;
-		}
-	    } elsif ($ptaldevice =~ /^mlc:usb:(.+)$/) {
-		# USB device
-		next if ($device !~ /usb/);
-		if ($line =~ /-devidmatch\s+(\"[^\"]*\")/) {
-		    $configuredmodel = $1;
-		    $configuredmodel =~ s/\"//g;
-		    $configuredmodel =~ s/^mdl://;
-		    $configuredmodel =~ s/^model://;
-		    $configuredmodel =~ s/;$//;
-		    if ($configuredmodel eq $model) {
-			# Our new device is USB and already configured
-			# by the current line
-			$deviceconfigured = 1;
-			last;
-		    }
-		} elsif ($line =~ m!-device\s+(/dev/usb/lp\d+)!) {
-		    if ($1 eq $device) {
-			# Our new device is USB and already configured
-			# by the current line
-			$deviceconfigured = 1;
-			last;
-		    }
-		}
-	    }
-	}
-	close HPOJCONFIG;
-    }
-
-    # It's all done for us, the device is already configured
-    return $ptaldevice if $deviceconfigured;
-
-    # Configure the device
-    my $entry;
-    if ($device =~ /usb/) {
-	# USB device
-	my $ptaldevicemodel = $model;
-	$ptaldevicemodel =~ s/\s+/_/g;
-	if ($model =~ /^\d+$/) {
-	    $entry = "\nptal-mlcd usb:$ptaldevicemodel -device $device \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:usb:$ptaldevicemodel \$PTAL_PRINTD_CMDLINE_APPEND\n";
-	} else {
-	    $entry = "\nptal-mlcd usb:$ptaldevicemodel -device /dev/usb/lp* -devidmatch \"$model;\" \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:usb:$ptaldevicemodel \$PTAL_PRINTD_CMDLINE_APPEND\n";
-	}
-	$ptaldevice = "mlc:usb:$ptaldevicemodel";
-    } else {
-	# parallel device
-	# auto-detect the parallel port addresses
-	$device =~ m!^/dev/lp(\d+)$!;
-	my $portnumber = $1;
-	my $address_arg = parport_addr($device);
-	$entry = "\nptal-mlcd par:$portnumber -device $device$address_arg \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:par:$portnumber \$PTAL_PRINTD_CMDLINE_APPEND\n";
-	$ptaldevice = "mlc:par:$portnumber";
-    }
-
-    # Add new entry to HPOJ's config file
-    open(HPOJCONFIG,">> $prefix$hpoj_config") ||
-	die "Could not open $hpoj_config for writing!\n";
-    print HPOJCONFIG $entry;
-    close HPOJCONFIG;
-    # Restart HPOJ
-    restart_service("hpoj");
-    # Return HPOJ device name to form the URI
-    return $ptaldevice;
-}
-
-sub parport_addr{
-    # auto-detect the parallel port addresses
-    my ($device) = @_;
-    $device =~ m!^/dev/lp(\d+)$!;
-    my $portnumber = $1;
-    my $parport_addresses = 
-	`cat /proc/sys/dev/parport/parport$portnumber/base-addr`;
-    my $address_arg;
-    if ($parport_addresses =~ /^\s*(\d+)\s+(\d+)\s*$/) {
-	$address_arg = sprintf(" -base 0x%x -basehigh 0x%x", $1, $2);
-    } elsif ($parport_addresses =~ /^\s*(\d+)\s*$/) {
-	$address_arg = sprintf(" -base 0x%x", $1);
-    } else {
-	$address_arg = "";
-    }
-    return $address_arg;
-}
-
-sub config_sane {
-    my ($ptaldevice) = @_;
-
-    # Create config file for HP backend
-    output("$prefix/etc/sane.d/hp.conf",
-	   "$ptaldevice\noption connect-ptal\n");
-
-    # Add HP backend to /etc/sane.d/dll.conf if needed
-    return if member("hp", chomp_(cat_("$prefix/etc/sane.d/dll.conf")));
-    local *F;
-    open F, ">> $prefix/etc/sane.d/dll.conf" or 
-	die "can't write SANE config in /etc/sane.d/dll.conf: $!";
-    print F "hp\n";
-    close F;
-}
-
-# ------------------------------------------------------------------
-#
-# Configuration of printers in Applications
-#
-# ------------------------------------------------------------------
-
-sub configureapplications {
-    my ($printer) = @_;
-    configurestaroffice($printer);
-    configureopenoffice($printer);
-}
-
-sub addcupsremotetoapplications {
-    my ($printer, $queue) = @_;
-    return (addcupsremotetostaroffice($printer, $queue) &&
-	    addcupsremotetoopenoffice($printer, $queue));
-}
-
-sub removeprinterfromapplications {
-    my ($printer, $queue) = @_;
-    return (removeprinterfromstaroffice($printer, $queue) &&
-	    removeprinterfromopenoffice($printer, $queue));
-}
-
-sub removelocalprintersfromapplications {
-    my ($printer) = @_;
-    removelocalprintersfromstaroffice($printer);
-    removelocalprintersfromopenoffice($printer);
-}
-
-sub configurestaroffice {
-    my ($printer) = @_;
-    # Do we have Star Office installed?
-    my $configfilename = findsofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
-    my $configprefix = $1;
-    # Load Star Office printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Update remote CUPS queues
-    if (0 && ($printer->{SPOOLER} eq "cups") && 
-	(-x "$prefix/usr/bin/curl")) {
-	my @printerlist = getcupsremotequeues();
-	for my $listentry (@printerlist) {
-	    next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
-	    my $queue = $1;
-	    my $server = $2;
-	    eval(run_program::rooted
-		 ($prefix, "curl", "-o", "/etc/foomatic/$queue.ppd",
-		  "http://$server:631/printers/$queue.ppd"));
-	    if (-r "$prefix/etc/foomatic/$queue.ppd") {
-		$configfilecontent = 
-		    makestarofficeprinterentry($printer, $queue,
-					       $configprefix,
-					       $configfilecontent);
-	    }
-	}
-    }
-    # Update local printer queues
-    for my $queue (keys(%{$printer->{configured}})) {
-	# Check if we have a PPD file
-	if (! -r "$prefix/etc/foomatic/$queue.ppd") {
-	    if (-r "$prefix/etc/cups/ppd/$queue.ppd") {
-		# If we have a PPD file in the CUPS config dir, link to it
-		run_program::rooted($prefix, 
-				    "ln", "-sf",
-				    "/etc/cups/ppd/$queue.ppd",
-				    "/etc/foomatic/$queue.ppd");
-	    } elsif (-r "$prefix/usr/share/postscript/ppd/$queue.ppd") {
-		# Check PPD directory of GPR, too
-		run_program::rooted($prefix, 
-				    "ln", "-sf",
-				    "/usr/share/postscript/ppd/$queue.ppd",
-				    "/etc/foomatic/$queue.ppd");
-	    } else {
-		# No PPD file at all? We cannot set up this printer
-		next;
-	    }
-	}
-	$configfilecontent = 
-	    makestarofficeprinterentry($printer, $queue, $configprefix,
-				       $configfilecontent);
-    }
-    # Patch PostScript output to print Euro symbol correctly also for
-    # the "Generic Printer"
-    $configfilecontent = removeentry
-	("ports", "default_queue=", $configfilecontent);
-    $configfilecontent = addentry
-	("ports",
-	 "default_queue=/usr/bin/perl -p -e \"s=16#80 /euro=16#80 /Euro=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}}",
-	 $configfilecontent);
-    # Write back Star Office configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub configureopenoffice {
-    my ($printer) = @_;
-    # Do we have OpenOffice.org installed?
-    my $configfilename = findopenofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
-    my $configprefix = $1;
-    # Load OpenOffice.org printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Update remote CUPS queues
-    if (0 && ($printer->{SPOOLER} eq "cups") && 
-	(-x "$prefix/usr/bin/curl")) {
-	my @printerlist = getcupsremotequeues();
-	for my $listentry (@printerlist) {
-	    next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
-	    my $queue = $1;
-	    my $server = $2;
-	    eval(run_program::rooted
-		 ($prefix, "curl", "-o", "/etc/foomatic/$queue.ppd",
-		  "http://$server:631/printers/$queue.ppd"));
-	    if (-r "$prefix/etc/foomatic/$queue.ppd") {
-		$configfilecontent = 
-		    makeopenofficeprinterentry($printer, $queue,
-					       $configprefix,
-					       $configfilecontent);
-	    }
-	}
-    }
-    # Update local printer queues
-    for my $queue (keys(%{$printer->{configured}})) {
-	# Check if we have a PPD file
-	if (! -r "$prefix/etc/foomatic/$queue.ppd") {
-	    if (-r "$prefix/etc/cups/ppd/$queue.ppd") {
-		# If we have a PPD file in the CUPS config dir, link to it
-		run_program::rooted($prefix, 
-				    "ln", "-sf",
-				    "/etc/cups/ppd/$queue.ppd",
-				    "/etc/foomatic/$queue.ppd");
-	    } elsif (-r "$prefix/usr/share/postscript/ppd/$queue.ppd") {
-		# Check PPD directory of GPR, too
-		run_program::rooted($prefix, 
-				    "ln", "-sf",
-				    "/usr/share/postscript/ppd/$queue.ppd",
-				    "/etc/foomatic/$queue.ppd");
-	    } else {
-		# No PPD file at all? We cannot set up this printer
-		next;
-	    }
-	}
-	$configfilecontent = 
-	    makeopenofficeprinterentry($printer, $queue, $configprefix,
-				       $configfilecontent);
-    }
-    # Patch PostScript output to print Euro symbol correctly also for
-    # the "Generic Printer"
-    $configfilecontent = removeentry
-	("Generic Printer", "Command=", $configfilecontent);
-    $configfilecontent = addentry
-	("Generic Printer", 
-	 "Command=/usr/bin/perl -p -e \"s=/euro /unused=/Euro /unused=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}}",
-	 $configfilecontent);
-    # Write back OpenOffice.org configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub addcupsremotetostaroffice {
-    my ($printer, $queue) = @_;
-    # Do we have Star Office installed?
-    my $configfilename = findsofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
-    my $configprefix = $1;
-    # Load Star Office printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Update remote CUPS queues
-    if (($printer->{SPOOLER} eq "cups") && 
-	(-x "$prefix/usr/bin/curl")) {
-	my @printerlist = getcupsremotequeues();
-	for my $listentry (@printerlist) {
-	    next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
-	    my $q = $1;
-	    next if ($q ne $queue);
-	    my $server = $2;
-	    # Remove server name from queue name
-	    $q =~ s/^([^@]*)@.*$/$1/;
-	    eval(run_program::rooted
-		 ($prefix, "/usr/bin/curl", "-o",
-		  "/etc/foomatic/$queue.ppd",
-		  "http://$server:631/printers/$q.ppd"));
-	    # Does the file exist and is it not an error message?
-	    if ((-r "$prefix/etc/foomatic/$queue.ppd") &&
-		(cat_("$prefix/etc/foomatic/$queue.ppd") =~ 
-		 /^\*PPD-Adobe/)) {
-		$configfilecontent = 
-		    makestarofficeprinterentry($printer, $queue,
-					       $configprefix,
-					       $configfilecontent);
-	    } else {
-		return 0;
-	    }
-	    last;
-	}
-    }
-    # Write back Star Office configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub addcupsremotetoopenoffice {
-    my ($printer, $queue) = @_;
-    # Do we have OpenOffice.org installed?
-    my $configfilename = findopenofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
-    my $configprefix = $1;
-    # Load OpenOffice.org printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Update remote CUPS queues
-    if (($printer->{SPOOLER} eq "cups") && 
-	(-x "$prefix/usr/bin/curl")) {
-	my @printerlist = getcupsremotequeues();
-	for my $listentry (@printerlist) {
-	    next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
-	    my $q = $1;
-	    next if ($q ne $queue);
-	    my $server = $2;
-	    # Remove server name from queue name
-	    $q =~ s/^([^@]*)@.*$/$1/;
-	    eval(run_program::rooted
-		 ($prefix, "/usr/bin/curl", "-o",
-		  "/etc/foomatic/$queue.ppd",
-		  "http://$server:631/printers/$q.ppd"));
-	    # Does the file exist and is it not an error message?
-	    if ((-r "$prefix/etc/foomatic/$queue.ppd") &&
-		(cat_("$prefix/etc/foomatic/$queue.ppd") =~ 
-		 /^\*PPD-Adobe/)) {
-		$configfilecontent = 
-		    makeopenofficeprinterentry($printer, $queue,
-					       $configprefix,
-					       $configfilecontent);
-	    } else {
-		return 0;
-	    }
-	}
-    }
-    # Write back OpenOffice.org configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub removeprinterfromstaroffice {
-    my ($printer, $queue) = @_;
-    # Do we have Star Office installed?
-    my $configfilename = findsofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
-    my $configprefix = $1;
-    # Load Star Office printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Remove the printer entry
-    $configfilecontent = 
-	removestarofficeprinterentry($printer, $queue, $configprefix,
-				     $configfilecontent);
-    # Write back Star Office configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub removeprinterfromopenoffice {
-    my ($printer, $queue) = @_;
-    # Do we have OpenOffice.org installed?
-    my $configfilename = findopenofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
-    my $configprefix = $1;
-    # Load OpenOffice.org printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Remove the printer entry
-    $configfilecontent = 
-	removeopenofficeprinterentry($printer, $queue, $configprefix,
-				     $configfilecontent);
-    # Write back OpenOffice.org configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub removelocalprintersfromstaroffice {
-    my ($printer) = @_;
-    # Do we have Star Office installed?
-    my $configfilename = findsofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
-    my $configprefix = $1;
-    # Load Star Office printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Remove the printer entries
-    for my $queue (keys(%{$printer->{configured}})) {
-	$configfilecontent = 
-	    removestarofficeprinterentry($printer, $queue, $configprefix,
-					 $configfilecontent);
-    }
-    # Write back Star Office configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub removelocalprintersfromopenoffice {
-    my ($printer) = @_;
-    # Do we have OpenOffice.org installed?
-    my $configfilename = findopenofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
-    my $configprefix = $1;
-    # Load OpenOffice.org printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Remove the printer entries
-    for my $queue (keys(%{$printer->{configured}})) {
-	$configfilecontent = 
-	    removeopenofficeprinterentry($printer, $queue, $configprefix,
-					 $configfilecontent);
-    }
-    # Write back OpenOffice.org configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub makestarofficeprinterentry {
-    my ($printer, $queue, $configprefix, $configfile) = @_;
-    # Set default printer
-    if ($queue eq $printer->{DEFAULT}) {
-	$configfile = removeentry("windows", "device=", $configfile);
-	$configfile = addentry("windows", 
-			       "device=$queue,$queue PostScript,$queue",
-			       $configfile);
-    }
-    # Make an entry in the "[devices]" section
-    $configfile = removeentry("devices", "$queue=", $configfile);
-    $configfile = addentry("devices", 
-			   "$queue=$queue PostScript,$queue",
-			   $configfile);
-    # Make an entry in the "[ports]" section
-    # The "perl" command patches the PostScript output to print the Euro
-    # symbol correctly.
-    $configfile = removeentry("ports", "$queue=", $configfile);
-    $configfile = addentry("ports", 
-			   "$queue=/usr/bin/perl -p -e \"s=16#80 /euro=16#80 /Euro=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}} -P $queue",
-			   $configfile);
-    # Make printer's section
-    $configfile = addsection("$queue,PostScript,$queue", $configfile);
-    # Load PPD file
-    my $ppd = cat_("$prefix/etc/foomatic/$queue.ppd");
-    # Set the PostScript level
-    my $pslevel;
-    if ($ppd =~ /^\s*\*LanguageLevel:\s*\"?([^\s\"]+)\"?\s*$/m) {
-	$pslevel = $1;
-	$pslevel = "2" if $pslevel eq "3";
-    } else {
-	$pslevel = "2";
-    }
-    $configfile = removeentry("$queue.PostScript.$queue",
-			      "Level=", $configfile);
-    $configfile = addentry("$queue.PostScript.$queue", 
-			   "Level=$pslevel", $configfile);
-    # Set Color/BW
-    my $color;
-    if ($ppd =~ /^\s*\*ColorDevice:\s*\"?([Tt]rue)\"?\s*$/m) {
-	$color = "1";
-    } else {
-	$color = "0";
-    }
-    $configfile = removeentry("$queue.PostScript.$queue",
-			      "BitmapColor=", $configfile);
-    $configfile = addentry("$queue.PostScript.$queue", 
-			   "BitmapColor=$color", $configfile);
-    # Set the default paper size
-    if ($ppd =~ /^\s*\*DefaultPageSize:\s*(\S+)\s*$/m) {
-	my $papersize=$1;
-	$configfile = removeentry("$queue.PostScript.$queue",
-				  "PageSize=", $configfile);
-	$configfile = removeentry("$queue.PostScript.$queue",
-				  "PPD_PageSize=", $configfile);
-	$configfile = addentry("$queue.PostScript.$queue", 
-			       "PageSize=$papersize", $configfile);
-	$configfile = addentry("$queue.PostScript.$queue", 
-			       "PPD_PageSize=$papersize", $configfile);
-    }
-    # Link the PPD file
-    run_program::rooted($prefix, 
-			"ln", "-sf", "/etc/foomatic/$queue.ppd", 
-			"$configprefix/share/xp3/ppds/$queue.PS");
-    return $configfile;
-}
-
-sub makeopenofficeprinterentry {
-    my ($printer, $queue, $configprefix, $configfile) = @_;
-    # Make printer's section
-    $configfile = addsection($queue, $configfile);
-    # Load PPD file
-    my $ppd = cat_("$prefix/etc/foomatic/$queue.ppd");
-    # "PPD_PageSize" line
-    if ($ppd =~ /^\s*\*DefaultPageSize:\s*(\S+)\s*$/m) {
-	my $papersize=$1;
-	$configfile = removeentry($queue,
-				  "PPD_PageSize=", $configfile);
-	$configfile = addentry($queue, 
-			       "PPD_PageSize=$papersize", $configfile);
-    }
-    # "Command" line
-    # The "perl" command patches the PostScript output to print the Euro
-    # symbol correctly.
-    $configfile = removeentry($queue, "Command=", $configfile);
-    $configfile = addentry($queue, 
-			   "Command=/usr/bin/perl -p -e \"s=/euro /unused=/Euro /unused=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}} -P $queue",
-			   $configfile);
-    # "Comment" line 
-    $configfile = removeentry($queue, "Comment=", $configfile);
-    if (($printer->{configured}{$queue}) &&
-	($printer->{configured}{$queue}{queuedata}{desc})) {
-	$configfile = addentry
-	    ($queue, 
-	     "Comment=$printer->{configured}{$queue}{queuedata}{desc}",
-	     $configfile);
-    } else {
-	$configfile = addentry($queue, 
-			       "Comment=",
-			       $configfile);
-    }
-    # "Location" line 
-    $configfile = removeentry($queue, "Location=", $configfile);
-    if (($printer->{configured}{$queue}) &&
-	($printer->{configured}{$queue}{queuedata}{loc})) {
-	$configfile = addentry
-	    ($queue, 
-	     "Location=$printer->{configured}{$queue}{queuedata}{loc}",
-	     $configfile);
-    } else {
-	$configfile = addentry($queue, 
-			       "Location=",
-			       $configfile);
-    }
-    # "DefaultPrinter" line
-    $configfile = removeentry($queue, "DefaultPrinter=", $configfile);
-    my $default = "0";
-    if ($queue eq $printer->{DEFAULT}) {
-	$default = "1";
-    }
-    $configfile = addentry($queue, 
-			   "DefaultPrinter=$default",
-			   $configfile);
-    # "Printer" line 
-    $configfile = removeentry($queue, "Printer=", $configfile);
-    $configfile = addentry($queue, 
-			   "Printer=$queue/$queue",
-			   $configfile);
-    # Link the PPD file
-    run_program::rooted($prefix, 
-			"ln", "-sf", "/etc/foomatic/$queue.ppd", 
-			"$configprefix/share/psprint/driver/$queue.PS");
-    return $configfile;
-}
-
-sub removestarofficeprinterentry {
-    my ($printer, $queue, $configprefix, $configfile) = @_;
-    # Remove default printer entry
-    $configfile = removeentry("windows", "device=$queue,", $configfile);
-    # Remove entry in the "[devices]" section
-    $configfile = removeentry("devices", "$queue=", $configfile);
-    # Remove entry in the "[ports]" section
-    $configfile = removeentry("ports", "$queue=", $configfile);
-    # Remove "[$queue,PostScript,$queue]" section
-    $configfile = removesection("$queue,PostScript,$queue", $configfile);
-    # Remove Link of PPD file
-    run_program::rooted($prefix, 
-			"rm", "-f", 
-			"$configprefix/share/xp3/ppds/$queue.PS");
-    return $configfile;
-}
-
-sub removeopenofficeprinterentry {
-    my ($printer, $queue, $configprefix, $configfile) = @_;
-    # Remove printer's section
-    $configfile = removesection("$queue", $configfile);
-    # Remove Link of PPD file
-    run_program::rooted($prefix, 
-			"rm", "-f", 
-			"$configprefix/share/psprint/driver/$queue.PS");
-    return $configfile;
-}
-
-sub findsofficeconfigfile {
-    my @configfilenames = 
-	("/usr/lib/*/share/xp3/Xpdefaults",
-	 "/usr/local/lib/*/share/xp3/Xpdefaults",
-	 "/usr/local/*/share/xp3/Xpdefaults",
-	 "/opt/*/share/xp3/Xpdefaults");
-    my $configfilename = "";
-    for $configfilename (@configfilenames) {
-	local *F;
-	if (open F, "ls -r $prefix$configfilename 2> /dev/null |") {
-	    my $filename = <F>;
-	    close F;
-	    if ($filename) {return $filename};
-	}
-    }
-    return "";
-}
-
-sub findopenofficeconfigfile {
-    my @configfilenames =
-	("/usr/lib/*/share/psprint/psprint.conf",
-	 "/usr/local/lib/*/share/psprint/psprint.conf",
-	 "/usr/local/*/share/psprint/psprint.conf",
-	 "/opt/*/share/psprint/psprint.conf");
-    my $configfilename = "";
-    for $configfilename (@configfilenames) {
-	local *F;
-	if (open F, "ls -r $prefix$configfilename 2> /dev/null |") {
-	    my $filename = <F>;
-	    close F;
-	    if ($filename) {return $filename};
-	}
-    }
-    return "";
-}
-
-sub readsofficeconfigfile {
-    my ($file) = @_;
-    local *F; 
-    open F, "< $prefix$file" || return "";
-    my $filecontent = join("", <F>);
-    close F;
-    return $filecontent;
-}
-
-sub writesofficeconfigfile {
-    my ($file, $filecontent) = @_;
-    local *F; 
-    open F, "> $prefix$file" || return 0;
-    print F $filecontent;
-    close F;
-    return 1;
-}
-
-sub getcupsremotequeues {
-    # The following code reads in a list of all remote printers which the
-    # local CUPS daemon knows due to broadcasting of remote servers or 
-    # "BrowsePoll" entries in the local /etc/cups/cupsd.conf
-    local *F;
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"lpstat -v |" || return ();
-    my @printerlist = ();
-    my $line;
-    while ($line = <F>) {
-	if ($line =~ m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) {
-	    my $queuename = $1;
-	    if (($2 =~ m!^ipp://([^/:]+)[:/]!) &&
-		(!$printer->{configured}{$queuename})) {
-		my $server = $1;
-		push (@printerlist, "$queuename|$server");
-	    }
-	}
-    }
-    close F;
-    return @printerlist;
-}
-
-sub addentry {
-    my ($section, $entry, $filecontent) = @_;
-    my $sectionfound = 0;
-    my $entryinserted = 0;
-    my @lines = split("\n", $filecontent);
-    local $_;
-    for (@lines) {
-	if (!$sectionfound) {
-	    if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
-		$sectionfound = 1;
-	    }
-	} else {
-	    if (($_ !~ /^\s*$/) && ($_ !~ /^\s*;/)) {
-		$_ = "$entry\n$_";
-		$entryinserted = 1;
-		last;
-	    }
-	}
-    }
-    if ($sectionfound && !$entryinserted) {
-	push(@lines, $entry);
-    }
-    return join ("\n", @lines);
-}
-
-sub addsection {
-    my ($section, $filecontent) = @_;
-    my $entryinserted = 0;
-    my @lines = split("\n", $filecontent);
-    local $_;
-    for (@lines) {
-	if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
-	    # section already there, nothing to be done
-	    return $filecontent;
-	}
-    }
-    return $filecontent . "\n[$section]";
-}
-
-sub removeentry {
-    my ($section, $entry, $filecontent) = @_;
-    my $sectionfound = 0;
-    my $done = 0;
-    my @lines = split("\n", $filecontent);
-    local $_;
-    for (@lines) {
-	$_ = "$_\n";
-	next if ($done);
-	if (!$sectionfound) {
-	    if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
-		$sectionfound = 1;
-	    }
-	} else {
-	    if ($_ =~ /^\s*\[.*\]\s*$/) { # Next section
-		$done = 1;
-	    } elsif ($_ =~ /^\s*$entry/) {
-		$_ = "";
-		$done = 1;
-	    }
-	}
-    }
-    return join ("", @lines);
-}
-
-sub removesection {
-    my ($section, $filecontent) = @_;
-    my $sectionfound = 0;
-    my $done = 0;
-    my @lines = split("\n", $filecontent);
-    local $_;
-    for (@lines) {
-	$_ = "$_\n";
-	next if ($done);
-	if (!$sectionfound) {
-	    if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
-		$_ = "";
-		$sectionfound = 1;
-	    }
-	} else {
-	    if ($_ =~ /^\s*\[.*\]\s*$/) { # Next section
-		$done = 1;
-	    } else {
-		$_ = "";
-	    }
-	}
-    }
-    return join ("", @lines);
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/printerdrake.pm b/perl-install/printerdrake.pm
deleted file mode 100644
index b5a15c178..000000000
--- a/perl-install/printerdrake.pm
+++ /dev/null
@@ -1,2931 +0,0 @@
-package printerdrake;
-# $Id$
-use diagnostics;
-use strict;
-
-
-use common;
-use detect_devices;
-use modules;
-use network;
-use log;
-use printer;
-
-1;
-
-sub choose_printer_type {
-    my ($printer, $in) = @_;
-    $in->set_help('configurePrinterConnected') if $::isInstall;
-    my $queue = $printer->{OLD_QUEUE};
-    $printer->{str_type} = $printer::printer_type_inv{$printer->{TYPE}};
-    $printer->{str_type} = 
-	$in->ask_from_list_(_("Select Printer Connection"),
-			    _("How is the printer connected?") .
-			    ($printer->{SPOOLER} eq "cups" ?
-			     _("
-Printers on remote CUPS servers you do not have to configure here; these printers will be automatically detected.") : ()),
-			    [ printer::printer_type($printer) ],
-			    $printer->{str_type},
-			    ) or return 0;
-    $printer->{TYPE} = $printer::printer_type{$printer->{str_type}};
-    1;
-}
-
-sub config_cups {
-    my ($printer, $in, $upNetwork) = @_;
-
-    local $::isWizard = 0;
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in, $upNetwork)) {return 0};
-
-    $in->set_help('configureRemoteCUPSServer') if $::isInstall;
-    my $queue = $printer->{OLD_QUEUE};
-    #- hack to handle cups remote server printing,
-    #- first read /etc/cups/cupsd.conf for variable BrowsePoll address:port
-    my ($server, $port, $default, $autoconf);
-    # Return value: 0 when nothing was changed ("Apply" never pressed), 1
-    # when "Apply" was at least pressed once.
-    my $retvalue = 0;
-    # Read CUPS config file
-    my @cupsd_conf = printer::read_cupsd_conf();
-    foreach (@cupsd_conf) {
-	/^\s*BrowsePoll\s+(\S+)/ and $server = $1, last;
-    }
-    $server =~ /([^:]*):(.*)/ and ($server, $port) = ($1, $2);
-    #- Did we have automatic or manual configuration mode for CUPS
-    $autoconf = printer::get_cups_autoconf();
-    #- Remember the server/port/autoconf settings to check whether the user
-    #- has changed them.
-    my $oldserver = $server;
-    my $oldport = $port;
-    my $oldautoconf = $autoconf;
-    
-    #- then ask user for this combination and rewrite /etc/cups/cupsd.conf
-    #- according to new settings. There are no other point where such
-    #- information is written in this file.
-    
-    if ($in->ask_from_
-	({ title => ($::expert ? _("CUPS configuration") :
-		     _("Specify CUPS server")),
-	   messages => _("To get access to printers on remote CUPS servers in your local network you do not have to configure anything; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \"Remote printers\" section in the main window of Printerdrake. When your CUPS server is not in your local network, you have to enter the CUPS server IP address and optionally the port number to get the printer information from the server, otherwise leave these fields blank.") .
-	       ($::expert ? "\n" . _("
-Normally, CUPS is automatically configured according to your network environment, so that you can access the printers on the CUPS servers in your local network. If this does not work correctly, turn off \"Automatic CUPS configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not forget to restart CUPS afterwards (command: \"service cups restart\").") : ()),
-	   callbacks => { complete => sub {
-	       unless (!$server || network::is_ip($server)) {
-		   $in->ask_warn('', _("The IP address should look like 192.168.1.20"));
-		   return (1,0);
-	       }
-	       if ($port !~ /^\d*$/) {
-		   $in->ask_warn('', _("The port number should be an integer!"));
-		   return (1,1);
-	       }
-	       return 0;
-	   } }
-       },
-	 [	
-		{ label => _("CUPS server IP"), val => \$server },
-		{ label => _("Port"), val => \$port },
-		($::expert ?
-		 { text => _("Automatic CUPS configuration"), type => 'bool',
-		   val => \$autoconf } : ()),
-	 ]
-	 )) {
-	# We have clicked "OK"
-	$retvalue = 1;
-	# Set BrowsePoll line
-	if (($server ne $oldserver) || ($port ne $oldport)) {
-	    $server && $port and $server = "$server:$port";
-	    if ($server) {
-		@cupsd_conf = 
-		    map { $server and 
-			      s/^\s*BrowsePoll\s+(\S+)/BrowsePoll $server/ and
-			      $server = '';
-			  $_ } @cupsd_conf;
-		$server and push @cupsd_conf, "\nBrowsePoll $server\n";
-	    } else {
-		@cupsd_conf = 
-		    map { s/^\s*BrowsePoll\s+(\S+)/\#BrowsePoll $1/;
-			  $_ } @cupsd_conf;
-	    }
-	    printer::write_cupsd_conf(@cupsd_conf);
-	}
-	# Set auto-configuration state
-	if ($autoconf != $oldautoconf) {
-	    printer::set_cups_autoconf($autoconf);
-	}
-	# Save user settings for auto-install
-	$printer->{BROWSEPOLLADDR} = $server;
-	$printer->{BROWSEPOLLPORT} = $port;
-	$printer->{MANUALCUPSCONFIG} = 1 - $autoconf;
-    }
-    return $retvalue;
-}
-
-sub setup_printer_connection {
-    my ($printer, $in, $upNetwork) = @_;
-    # Choose the appropriate connection config dialog
-    my $done = 1;
-    for ($printer->{TYPE}) {
-	/LOCAL/     and setup_local    ($printer, $in) and last;
-	/LPD/       and setup_lpd      ($printer, $in, $upNetwork) and last;
-	/SOCKET/    and setup_socket   ($printer, $in, $upNetwork) and last;
-	/SMB/       and setup_smb      ($printer, $in, $upNetwork) and last;
-	/NCP/       and setup_ncp      ($printer, $in, $upNetwork) and last;
-	/URI/       and setup_uri      ($printer, $in, $upNetwork) and last;
-	/POSTPIPE/  and setup_postpipe ($printer, $in) and last;
-	$done = 0; last;
-    }
-    return $done;
-}
-
-sub auto_detect {
-    my ($in) = @_;
-    {
-	my $w = $in->wait_message(_("Test ports"), _("Detecting devices..."));
-	modules::get_alias("usb-interface") and eval { modules::load("printer") };
-	eval { modules::unload(qw(lp parport_pc parport_probe parport)) }; #- on kernel 2.4 parport has to be unloaded to probe again
-	eval { modules::load(qw(parport_pc lp parport_probe)); }; #- take care as not available on 2.4 kernel (silent error).
-    }
-    my $b = before_leaving { eval { modules::unload("parport_probe") } };
-    detect_devices::whatPrinter();
-}
-
-sub wizard_welcome {
-    my ($printer, $in) = @_;
-    my $ret;
-    my $autodetect = 1;
-    $autodetect = 0 if ($printer->{NOAUTODETECT});
-    if ($in) {
-	eval {
-	    if ($::expert) {
-		$ret = $in->ask_okcancel
-		    (_("Add a new printer"),
-		     _("
-Welcome to the Printer Setup Wizard
-
-This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.
-
-It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types."));
-	    } else {
-		$ret = $in->ask_from_
-		    ({title => _("Local Printer"),
-		      messages => _("
-Welcome to the Printer Setup Wizard
-
-This wizard will help you to install your printer(s) connected to this computer.
-
-Please plug in your printer(s) on this computer and turn it/them on. Click on \"Next\" when you are ready, and on \"Cancel\" when you do not want to set up your printer(s) now.
-
-Note that some computers can crash during the printer auto-detection, turn off \"Auto-detect printers\" to do a printer installation without auto-detection. Use the \"Expert Mode\" of printerdrake when you want to set up printing on a remote printer if printerdrake does not list it automatically.")},
-		     [
-		      { text => _("Auto-detect printers"), type => 'bool',
-			val => \$autodetect},
-		      ]);
-		if (!$autodetect) {
-		    $printer->{NOAUTODETECT} = 1;
-		} else {
-		    undef $printer->{NOAUTODETECT};
-		}
-	    }
-	};
-	return ($@ =~ /wizcancel/) ? 0 : $ret;
-    }
-}
-
-sub wizard_congratulations {
-    my ($in) = @_;
-    if ($in) {
-	$in->ask_okcancel(_("Local Printer"),
-			  _("
-Congratulations, your printer is now installed and configured!
-
-You can print using the \"Print\" command of your application (usually in the \"File\" menu).
-
-If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \"Printer\" in the \"Hardware\" section of the Mandrake Control Center."))
-    }
-}
-
-sub setup_local {
-    my ($printer, $in) = @_;
-    my (@port, @str, $device);
-    my $queue = $printer->{OLD_QUEUE};
-    my $do_auto_detect;
-    if ((!$::expert) && ($::isWizard)) {
-	$do_auto_detect = !$printer->{NOAUTODETECT};
-    } else {
-	local $::isWizard = 0;
-	my $res = $in->ask_from_list_
-	    (_("Auto-Detection of Printers"),
-	     _("Printerdrake is able to auto-detect your locally connected parallel and USB printers for you, but note that on some systems the auto-detection CAN FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON YOUR OWN RISK!
-
-Do you really want to get your printers auto-detected?"),
-	     [_("Do auto-detection"),
-	      _("Set up printer manually")],
-	     _("Do auto-detection"));
-	$do_auto_detect = ($res eq _("Do auto-detection"));
-    }
-    my @parport = ();
-    my $menuentries = {};
-    $in->set_help('setupLocal') if $::isInstall;
-    if ($do_auto_detect) {
-	# When HPOJ is running, it blocks the printer ports on which it is
-	# configured, so we stop it here. If it is not installed or not 
-	# configured, this command has no effect.
-	printer::stop_service("hpoj");
-	@parport = auto_detect($in);
-	# We have more than one printer, so we must ask the user for a queue
-	# name in the fully automatic printer configuration.
-	$printer->{MORETHANONE} = ($#parport > 0);
-	for my $p (@parport) {
-	    if ($p->{val}{DESCRIPTION}) {
-		my $menustr = $p->{val}{DESCRIPTION};
-		if ($p->{port} =~ m!^/dev/lp(\d+)$!) {
-		    $menustr .= _(" on parallel port \#%s", $1);
-		} elsif ($p->{port} =~ m!^/dev/usb/lp(\d+)$!) {
-		    $menustr .= _(", USB printer \#%s", $1);
-		}
-		if ($::expert) {
-		    $menustr .= " ($p->{port})";
-		}
-		$menuentries->{$menustr} = $p->{port};
-		push @str, _("Detected %s", $menustr);
-	    } else {
-		my $menustr;
-		if ($p->{port} =~ m!^/dev/lp(\d+)$!) {
-		    $menustr = _("Printer on parallel port \#%s", $1);
-		} elsif ($p->{port} =~ m!^/dev/usb/lp(\d+)$!) {
-		    $menustr = _("USB printer \#%s", $1);
-		}
-		if ($::expert) {
-		    $menustr .= " ($p->{port})";
-		}
-		$menuentries->{$menustr} = $p->{port};
-	    }
-	}
-	if ($::expert) {
-	    @port = detect_devices::whatPrinterPort();
-	    for my $q (@port) {
-		if (@str) {
-		    my $alreadyfound = 0;
-		    for my $p (@parport) {
-			if ($p->{port} eq $q) {
-			    $alreadyfound = 1;
-			    last;
-			}
-		    }
-		    if ($alreadyfound) {
-			next;
-		    }
-		}
-		my $menustr;
-		if ($q =~ m!^/dev/lp(\d+)$!) {
-		    $menustr = _("Printer on parallel port \#%s", $1);
-		} elsif ($q =~ m!^/dev/usb/lp(\d+)$!) {
-		    $menustr = _("USB printer \#%s", $1);
-		}
-		if ($::expert) {
-		    $menustr .= " ($q)";
-		}
-		$menuentries->{$menustr} = $q;
-	    }
-	}
-	# We are ready with auto-detection, so we restart HPOJ here. If it 
-	# is not installed or not configured, this command has no effect.
-	printer::start_service("hpoj");
-    } else {
-	# Always ask for queue name in recommended mode when no auto-
-	# detection was done
-	$printer->{MORETHANONE} = ($#parport > 0);
-	my $m;
-	for ($m = 0; $m <= 2; $m++) {
-	    my $menustr = _("Printer on parallel port \#%s", $m);
-	    if ($::expert) {
-		$menustr .= " (/dev/lp$m)";
-	    }
-	    $menuentries->{$menustr} = "/dev/lp$m";
-	    $menustr = _("USB printer \#%s", $m);
-	    if ($::expert) {
-		$menustr .= " (/dev/usb/lp$m)";
-	    }
-	    $menuentries->{$menustr} = "/dev/usb/lp$m";
-	}
-    }
-    my @menuentrieslist = sort { $menuentries->{$a} cmp $menuentries->{$b} }
-    keys(%{$menuentries});
-    my $menuchoice = "";
-    my $oldmenuchoice = "";
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^file:/)) {
-	# Non-HP or HP print-only device (HPOJ not used)
-	$device = $printer->{currentqueue}{'connect'};
-	$device =~ s/^file://;
-	for my $p (keys %{$menuentries}) {
-	    if ($device eq $menuentries->{$p}) {
-		$menuchoice = $p;
-		last;
-	    }
-	}
-    } elsif (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m!^ptal:/mlc:!)) {
-	# HP multi-function device (controlled by HPOJ)
-	my $ptaldevice = $printer->{currentqueue}{'connect'};
-	$ptaldevice =~ s!^ptal:/mlc:!!;
-	if ($ptaldevice =~ /^par:(\d+)$/) {
-	    $device = "/dev/lp$1";
-	    for my $p (keys %{$menuentries}) {
-		if ($device eq $menuentries->{$p}) {
-		    $menuchoice = $p;
-		    last;
-		}
-	    }
-	} else {
-	    my $make = lc($printer->{currentqueue}{'make'});
-	    my $model = lc($printer->{currentqueue}{'model'});
-	    $device = "";
-	    for my $p (keys %{$menuentries}) {
-		my $menumakemodel = lc($p);
-		if (($menumakemodel =~ /$make/) && 
-		    ($menumakemodel =~ /$model/)) {
-		    $menuchoice = $p;
-		    $device = $menuentries->{$p};
-		    last;
-		}
-	    }
-	}
-    } else {
-	$device = "";
-    }
-    if (($menuchoice eq "") && (@menuentrieslist > -1)) {
-	$menuchoice = $menuentrieslist[0];
-	$oldmenuchoice = $menuchoice;
-	if ($device eq "") {
-	    $device = $menuentries->{$menuchoice};
-	}
-    }
-    if ($in) {
-	$::expert or $in->set_help('configurePrinterDev') if $::isInstall;
-	if ($#menuentrieslist < 0) { # No menu entry
-	    # auto-detection has failed, we must do all manually
-	    $do_auto_detect = 0;
-	    $printer->{MANUAL} = 1;
-	    if ($::expert) {
-		$device = $in->ask_from_entry
-		    (_("Local Printer"),
-		     _("No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."),
-		     { 
-			 complete => sub {
-			     unless ($menuchoice ne "") {
-				 $in->ask_warn('', _("You must enter a device or file name!"));
-				 return (1,0);
-			     }
-			     return 0;
-			 }
-		     });
-		if ($device eq "") {
-		    return 0;
-		}
-	    } else {
-		$in->ask_warn(_("Local Printer"),
-			      _("No local printer found!\n\n") . 
-			      ($::isInstall ? _("Network printers can only be installed after the installation. Choose \"Hardware\" and then \"Printer\" in the Mandrake Control Center.") :
-			       _("To install network printers, click \"Cancel\", switch to the \"Expert Mode\", and click \"Add a new printer\" again.")));
-		return 0;
-	    }
-	} else {
-	    my $manualconf = 0;
-	    $manualconf = 1 if (($printer->{MANUAL}) || (!$do_auto_detect));
-	    if (!$in->ask_from_(
-	    {title => _("Local Printer"),
-	     messages => (($do_auto_detect ?
-			  ($::expert ?
-			   (($#menuentrieslist == 0) ?
-_("The following printer was auto-detected, if it is not the one you want to configure, enter a device name/file name in the input line") :
-_("Here is a list of all auto-detected printers. Please choose the printer you want to set up or enter a device name/file name in the input line")) :
-			   (($#menuentrieslist == 0) ?
-_("The following printer was auto-detected. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\".") :
-_("Here is a list of all auto-detected printers. Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"."))) :
-			  ($::expert ?
-_("Please choose the port where your printer is connected to or enter a device name/file name in the input line") :
-_("Please choose the port where your printer is connected to."))) .
-			 ($::expert ?
-_(" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).") :
-			  ())), 
-             callbacks => {
-		 complete => sub {
-		     unless ($menuchoice ne "") {
-			 $in->ask_warn('', _("You must choose/enter a printer/device!"));
-			 return (1,0);
-		     }
-		     return 0;
-		 },
-		 changed => sub {
-		     if ($oldmenuchoice ne $menuchoice) {
-			 $device = $menuentries->{$menuchoice};
-			 $oldmenuchoice = $menuchoice;
-		     }
-		     return 0;
-		 }
-	     }},
-            [
-	     ($::expert ? 
-	      { val => \$device } : ()),
-	     { val => \$menuchoice, list => \@menuentrieslist, 
-	       not_edit => !$::expert, format => \&translate,
-	       allow_empty_list => 1, type => 'list' },
-	     (((!$::expert) && ($do_auto_detect) && ($printer->{NEW})) ? 
-	      { text => _("Manual configuration"), type => 'bool',
-		val => \$manualconf } : ()),
-	    ]
-	    )) {
-		return 0;
-	    }
-	    if ($device ne $menuentries->{$menuchoice}) {
-		$menuchoice = "";
-		$do_auto_detect = 0;
-	    }
-	    if ($manualconf) {
-		$printer->{MANUAL} = 1;
-	    } else {
-		undef $printer->{MANUAL};
-	    }
-	}
-    }
-
-    #- Check whether the printer is an HP multi-function device and 
-    #- configure HPOJ if it is one
-
-    my $ptaldevice = "";
-    my $isHPOJ = 0;
-    if (!$do_auto_detect) {
-	local $::isWizard = 0;
-	$isHPOJ = $in->ask_yesorno(_("Local Printer"),
-				   _("Is your printer a multi-function device from HP (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner), an HP PhotoSmart P100 or 1315 or an HP LaserJet 2200?"), 0);
-    }
-    if (($menuchoice =~ /HP\s+OfficeJet/i) ||
-	($menuchoice =~ /HP\s+PSC/i) ||
-	($menuchoice =~ /HP\s+PhotoSmart\s+P?\s*100\D/i) ||
-	($menuchoice =~ /HP\s+PhotoSmart\s+P?\s*1315/i) ||
-	($menuchoice =~ /HP\s+LaserJet\s+1100/i) ||
-	($menuchoice =~ /HP\s+LaserJet\s+1200/i) ||
-	($menuchoice =~ /HP\s+LaserJet\s+1220/i) ||
-	($menuchoice =~ /HP\s+LaserJet\s+2200/i) ||
-	($menuchoice =~ /HP\s+LaserJet\s+3200/i) ||
-	($menuchoice =~ /HP\s+LaserJet\s+33.0/i) ||
-	($isHPOJ)) {
-	# Install HPOJ package
-	if ((!$::testing) &&
-	    (!printer::files_exist((qw(/usr/sbin/ptal-mlcd
-				       /etc/ptal-start.conf))))) {
-	    my $w = $in->wait_message('', _("Installing HPOJ package..."));
-	    $in->do_pkgs->install('hpoj');
-	}
-	# Configure and start HPOJ
-	my $w = $in->wait_message
-	    ('', _("Checking device and configuring HPOJ..."));
-	$ptaldevice = printer::configure_hpoj($device, @parport);
-
-	if ($ptaldevice) {
-	    # Configure scanning with SANE on the MF device
-	    if (($menuchoice =~ /HP\s+OfficeJet\s+[KVRGPD]/i) ||
-		($menuchoice =~ /HP\s+PSC\s+[579]/i)) {
-		# Install SANE
-		if ((!$::testing) &&
-		    (!printer::files_exist((qw(/usr/bin/scanimage
-					       /usr/bin/xscanimage
-					       /usr/bin/xsane
-					       /etc/sane.d/dll.conf),
-					    (printer::files_exist
-					     ('/usr/bin/gimp') ? 
-					     '/usr/bin/xsane-gimp' : 
-					     ()))))) {
-		    my $w = $in->wait_message
-			('', _("Installing SANE package..."));
-		    $in->do_pkgs->install('sane-backends', 'sane-frontends',
-					  'xsane', 
-					  if_($in->do_pkgs->is_installed
-					      ('gimp'),'xsane-gimp'));
-		}
-		# Configure the HP SANE backend
-		printer::config_sane($ptaldevice);
-	    }
-	    # Inform user about how to scan with his MF device
-	    my $text = scanner_help($menuchoice, "ptal:/$ptaldevice");
-	    if ($text) {
-		$in->ask_warn(_("Scanning on your HP multi-function device"),
-			      $text);
-	    }
-	    # make the DeviceURI from $ptaldevice.
-	    $printer->{currentqueue}{'connect'} = "ptal:/" . $ptaldevice;
-	} else {
-	    # make the DeviceURI from $device.
-	    $printer->{currentqueue}{'connect'} = "file:" . $device;
-	}
-    } else {
-	# make the DeviceURI from $device.
-	$printer->{currentqueue}{'connect'} = "file:" . $device;
-    }
-
-    #- if CUPS is the spooler, make sure that CUPS knows the device
-    if ($printer->{SPOOLER} eq "cups") {
-	my $w = $in->wait_message
-	    ('', _("Making printer port available for CUPS..."));
-	if ($ptaldevice eq "") {
-	    printer::assure_device_is_available_for_cups($device);
-	} else {
-	    printer::assure_device_is_available_for_cups($ptaldevice);
-	}
-    }
-
-    #- Read the printer driver database if necessary
-    if ((keys %printer::thedb) == 0) {
-	my $w = $in->wait_message('', _("Reading printer database..."));
-        printer::read_printer_db($printer->{SPOOLER});
-    }
-
-    #- Search the database entry which matches the detected printer best
-    my $descr = "";
-    foreach (@parport) {
-	$device eq $_->{port} or next;
-	if (($_->{val}{MANUFACTURER}) && ($_->{val}{MODEL})) {
-	    $descr = "$_->{val}{MANUFACTURER} $_->{val}{MODEL}";
-	} else {
-	    $descr = $_->{val}{DESCRIPTION};
-	}
-	# Clean up the description from noise which makes the best match
-	# difficult
-	$descr =~ s/\s+Inc\.//;
-	$descr =~ s/\s+Corp\.//;
-	$descr =~ s/\s+SA\.//;
-	$descr =~ s/\s+S\.\s*A\.//;
-	$descr =~ s/\s+Ltd\.//;
-	$descr =~ s/\s+International//;
-	$descr =~ s/\s+Int\.//;
-	$descr =~ s/\s+[Ss]eries//;
-	$descr =~ s/\s+\(?[Pp]rinter\)?$//;
-	$printer->{DBENTRY} = "";
-	for my $entry (keys(%printer::thedb)) {
-	    if ($entry =~ m!$descr!) {
-		$printer->{DBENTRY} = $entry;
-		last;
-	    }
-	}
-	if (!$printer->{DBENTRY}) {
-	    $printer->{DBENTRY} =
-		bestMatchSentence ($descr, keys %printer::thedb);
-	}
-        # If the manufacturer was not guessed correctly, discard the
-        # guess.
-        $printer->{DBENTRY} =~ /^([^\|]+)\|/;
-        my $guessedmake = lc($1);
-        if (($descr !~ /$guessedmake/i) &&
-            (($guessedmake ne "hp") ||
-             ($descr !~ /Hewlett[\s-]+Packard/i)))
-            {$printer->{DBENTRY} = ""};
-    }
-
-    #- Pre-fill the "Description" field with the printer's model name
-    if ((!$printer->{currentqueue}{'desc'}) && ($descr)) {
-	$printer->{currentqueue}{'desc'} = $descr;
-	$printer->{currentqueue}{'desc'} =~ s/\|/ /g;
-    }
-
-    #- When we have chosen a printer here, the question whether the
-    #- automatically chosen model from the database is correct, should
-    #- have "This model is correct" as default answer
-    delete($printer->{MANUALMODEL});
-
-    1;
-}
-
-sub setup_lpd {
-    my ($printer, $in, $upNetwork) = @_;
-
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in, $upNetwork)) {return 0};
-
-    $in->set_help('setupLPD') if $::isInstall;
-    my ($uri, $remotehost, $remotequeue);
-    my $queue = $printer->{OLD_QUEUE};
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^lpd:/)) {
-	$uri = $printer->{currentqueue}{'connect'};
-	$uri =~ m!^\s*lpd://([^/]+)/([^/]+)/?\s*$!;
-	$remotehost = $1;
-	$remotequeue = $2;
-    } else {
-	$remotehost = "";
-	$remotequeue = "lp";
-    }
-
-    return if !$in->ask_from(_("Remote lpd Printer Options"),
-_("To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server."), [
-{ label => _("Remote host name"), val => \$remotehost },
-{ label => _("Remote printer name"), val => \$remotequeue } ],
-complete => sub {
-    unless ($remotehost ne "") {
-	$in->ask_warn('', _("Remote host name missing!"));
-	return (1,0);
-    }
-    unless ($remotequeue ne "") {
-	$in->ask_warn('', _("Remote printer name missing!"));
-	return (1,1);
-    }
-    return 0;
-}
-			      );
-    #- make the DeviceURI from user input.
-    $printer->{currentqueue}{'connect'} = 
-        "lpd://$remotehost/$remotequeue";
-
-    #- LPD does not support filtered queues to a remote LPD server by itself
-    #- It needs an additional program as "rlpr"
-    if (($printer->{SPOOLER} eq 'lpd') && (!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/rlpr))))) {
-        $in->do_pkgs->install('rlpr');
-    }
-
-    1;
-}
-
-sub setup_smb {
-    my ($printer, $in, $upNetwork) = @_;
-
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in, $upNetwork)) {return 0};
-
-    $in->set_help('setupSMB') if $::isInstall;
-    my ($uri, $smbuser, $smbpassword, $workgroup, $smbserver, $smbserverip, $smbshare);
-    my $queue = $printer->{OLD_QUEUE};
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^smb:/)) {
-	$uri = $printer->{currentqueue}{'connect'};
-	$uri =~ m!^\s*smb://(.*)$!;
-	my $parameters = $1;
-	# Get the user's login and password from the URI
-	if ($parameters =~ m!([^@]*)@([^@]+)!) {
-	    my $login = $1;
-	    $parameters = $2;
-	    if ($login =~ m!([^:]*):([^:]*)!) {
-		$smbuser = $1;
-		$smbpassword = $2;
-	    } else {
-		$smbuser = $login;
-		$smbpassword = "";
-	    }
-	} else {
-	    $smbuser = "";
-	    $smbpassword = "";
-	}
-	# Get the workgroup, server, and share name
-	if ($parameters =~ m!([^/]*)/([^/]+)/([^/]+)$!) {
-	    $workgroup = $1;
-	    $smbserver = $2;
-	    $smbshare = $3;
-	} elsif ($parameters =~ m!([^/]+)/([^/]+)$!) {
-	    $workgroup = "";
-	    $smbserver = $1;
-	    $smbshare = $2;
-	} else {
-	    die "The \"smb://\" URI must at least contain the server name and the share name!\n";
-	}
-	if (network::is_ip($smbserver)) {
-	    $smbserverip = $smbserver;
-	    $smbserver = "";
-	}
-    }
-
-    return if !$in->ask_from(_("SMB (Windows 9x/NT) Printer Options"),
-_("To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information."), [
-{ label => _("SMB server host"), val => \$smbserver },
-{ label => _("SMB server IP"), val => \$smbserverip },
-{ label => _("Share name"), val => \$smbshare },
-{ label => _("User name"), val => \$smbuser },
-{ label => _("Password"), val => \$smbpassword, hidden => 1 },
-{ label => _("Workgroup"), val => \$workgroup }, ],
-complete => sub {
-    unless ((network::is_ip($smbserverip)) || ($smbserverip eq "")) {
-	$in->ask_warn('', _("IP address should be in format 1.2.3.4"));
-	return (1,1);
-    }
-    unless (($smbserver ne "") || ($smbserverip ne "")) {
-	$in->ask_warn('', _("Either the server name or the server's IP must be given!"));
-	return (1,0);
-    }
-    unless ($smbshare ne "") {
-	$in->ask_warn('', _("Samba share name missing!"));
-	return (1,2);
-    }
-    unless ($smbpassword eq "") {
-	local $::isWizard = 0;
-	my $yes = $in->ask_yesorno(_("SECURITY WARNING!"),
-_("You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \"ps auxwww\".
-
-We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):
-
-Use a password-less account on your Windows server, as the \"GUEST\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.
-
-Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \"%s\" connection type in Printerdrake.
-
-", _("Printer on remote lpd server")) .
-($::expert ? 
-_("Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \"%s\" connection type in Printerdrake.
-
-", _("Enter a printer device URI")) : "") .
-_("Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.
-
-Do you really want to continue setting up this printer as you are doing now?"), 0);
-	return 0 if $yes;
-	return (1,2);
-    }
-    return 0;
-}
-    );
-    #- make the DeviceURI from, try to probe for available variable to
-    #- build a suitable URI.
-    $printer->{currentqueue}{'connect'} =
-    join '', ("smb://", ($smbuser && ($smbuser . 
-    ($smbpassword && ":$smbpassword") . "@")), ($workgroup && ("$workgroup/")),
-    ($smbserver || $smbserverip), "/$smbshare");
-
-    if ((!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/smbclient))))) {
-	$in->do_pkgs->install('samba-client');
-    }
-    $printer->{SPOOLER} eq 'cups' and printer::restart_queue($printer);
-    1;
-}
-
-sub setup_ncp {
-    my ($printer, $in, $upNetwork) = @_;
-
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in, $upNetwork)) {return 0};
-
-    $in->set_help('setupNCP') if $::isInstall;
-    my ($uri, $ncpuser, $ncppassword, $ncpserver, $ncpqueue);
-    my $queue = $printer->{OLD_QUEUE};
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^ncp:/)) {
-	$uri = $printer->{currentqueue}{'connect'};
-	my $parameters = $uri =~ m!^\s*ncp://(.*)$!;
-	# Get the user's login and password from the URI
-	if ($parameters =~ m!([^@]*)@([^@]+)!) {
-	    my $login = $1;
-	    $parameters = $2;
-	    if ($login =~ m!([^:]*):([^:]*)!) {
-		$ncpuser = $1;
-		$ncppassword = $2;
-	    } else {
-		$ncpuser = $login;
-		$ncppassword = "";
-	    }
-	} else {
-	    $ncpuser = "";
-	    $ncppassword = "";
-	}
-	# Get the workgroup, server, and share name
-	if ($parameters =~ m!([^/]+)/([^/]+)$!) {
-	    $ncpserver = $1;
-	    $ncpqueue = $2;
-	} else {
-	    die "The \"ncp://\" URI must at least contain the server name and the share name!\n";
-	}
-    }
-
-    return if !$in->ask_from(_("NetWare Printer Options"),
-_("To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password."), [
-{ label => _("Printer Server"), val => \$ncpserver },
-{ label => _("Print Queue Name"), val => \$ncpqueue },
-{ label => _("User name"), val => \$ncpuser },
-{ label => _("Password"), val => \$ncppassword, hidden => 1 } ],
-complete => sub {
-    unless ($ncpserver ne "") {
-	$in->ask_warn('', _("NCP server name missing!"));
-	return (1,0);
-    }
-    unless ($ncpqueue ne "") {
-	$in->ask_warn('', _("NCP queue name missing!"));
-	return (1,1);
-    }
-    return 0;
-}
-					);
-    # Generate the Foomatic URI
-    $printer->{currentqueue}{'connect'} =
-    join '', ("ncp://", ($ncpuser && ($ncpuser . 
-    ($ncppassword && ":$ncppassword") . "@")),
-    "$ncpserver/$ncpqueue");
-
-    if ((!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/nprint))))) {
-	$in->do_pkgs->install('ncpfs');
-    }
-
-    1;
-}
-
-sub setup_socket {
-    my ($printer, $in, $upNetwork) = @_;
-
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in, $upNetwork)) {return 0};
-
-    $in->set_help('setupSocket') if $::isInstall;
-    my ($hostname, $port, $uri, $remotehost,$remoteport);
-    my $queue = $printer->{OLD_QUEUE};
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^socket:/)) {
-	$uri = $printer->{currentqueue}{'connect'};
-	($remotehost, $remoteport) = $uri =~ m!^\s*socket://([^/:]+):([0-9]+)/?\s*$!;
-    } else {
-	$remotehost = "";
-	$remoteport = "9100";
-    }
-
-    return if !$in->ask_from(_("TCP/Socket Printer Options"),
-_("To print to a TCP or socket printer, you need to provide the host name of the printer and optionally the port number. On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware."), [
-{ label => _("Printer host name"), val => \$remotehost },
-{ label => _("Port"), val => \$remoteport } ],
-complete => sub {
-    unless ($remotehost ne "") {
-	$in->ask_warn('', _("Printer host name missing!"));
-	return (1,0);
-    }
-    unless ($remoteport =~ /^[0-9]+$/) {
-	$in->ask_warn('', _("The port number should be an integer!"));
-	return (1,1);
-    }
-    return 0;
-}
-					 );
-
-    #- make the Foomatic URI
-    $printer->{currentqueue}{'connect'} = 
-    join '', ("socket://$remotehost", $remoteport ? (":$remoteport") : ());
-
-    #- LPD and LPRng need netcat ('nc') to access to socket printers
-    if ((($printer->{SPOOLER} eq 'lpd') || ($printer->{SPOOLER} eq 'lprng'))&& 
-        (!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/nc))))) {
-        $in->do_pkgs->install('nc');
-    }
-
-    1;
-}
-
-sub setup_uri {
-    my ($printer, $in, $upNetwork) = @_;
-
-    $in->set_help('setupURI') if $::isInstall;
-    return if !$in->ask_from(_("Printer Device URI"),
-_("You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers."), [
-{ label => _("Printer Device URI"),
-val => \$printer->{currentqueue}{'connect'},
-list => [ $printer->{currentqueue}{'connect'},
-	  "file:/",
-	  "http://",
-	  "ipp://",
-	  "lpd://",
-	  "smb://",
-	  "ncp://",
-	  "socket://",
-	  "postpipe:\"\"",
-	  ], not_edit => 0 }, ],
-complete => sub {
-    unless ($printer->{currentqueue}{'connect'} =~ /[^:]+:.+/) {
-	$in->ask_warn('', _("A valid URI must be entered!"));
-	return (1,0);
-    }
-    return 0;
-}
-    );
-
-    # Non-local printer, check network and abort if no network available
-    if (($printer->{currentqueue}{'connect'} !~ m!^file:/!) &&
-        (!check_network($printer, $in, $upNetwork))) {return 0};
-
-    # If the chosen protocol needs additional software, install it.
-
-    # LPD does not support filtered queues to a remote LPD server by itself
-    # It needs an additional program as "rlpr"
-    if (($printer->{currentqueue}{'connect'} =~ /^lpd:/) &&
-	($printer->{SPOOLER} eq 'lpd') && (!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/rlpr))))) {
-        $in->do_pkgs->install('rlpr');
-    }
-    if (($printer->{currentqueue}{'connect'} =~ /^smb:/) &&
-        (!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/smbclient))))) {
-	$in->do_pkgs->install('samba-client');
-    }
-    if (($printer->{currentqueue}{'connect'} =~ /^ncp:/) &&
-	(!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/nprint))))) {
-	$in->do_pkgs->install('ncpfs');
-    }
-    #- LPD and LPRng need netcat ('nc') to access to socket printers
-    if (($printer->{currentqueue}{'connect'} =~ /^socket:/) &&
-	(($printer->{SPOOLER} eq 'lpd') || ($printer->{SPOOLER} eq 'lprng')) &&
-        (!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/nc))))) {
-        $in->do_pkgs->install('nc');
-    }
-    1;
-}
-
-sub setup_postpipe {
-    my ($printer, $in) = @_;
-
-    $in->set_help('setupPostpipe') if $::isInstall;
-    my $uri;
-    my $commandline;
-    my $queue = $printer->{OLD_QUEUE};
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^postpipe:/)) {
-	$uri = $printer->{currentqueue}{'connect'};
-	$uri =~ m!^\s*postpipe:\"(.*)\"$!;
-	$commandline = $1;
-    } else {
-	$commandline = "";
-    }
-
-    return if !$in->ask_from(_("Pipe into command"),
-_("Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer."), [
-{ label => _("Command line"),
-val => \$commandline }, ],
-complete => sub {
-    unless ($commandline ne "") {
-	$in->ask_warn('', _("A command line must be entered!"));
-	return (1,0);
-    }
-    return 0;
-}
-);
-
-    #- make the Foomatic URI
-    $printer->{currentqueue}{'connect'} = "postpipe:$commandline";
-    
-    1;
-}
-
-sub choose_printer_name {
-    my ($printer, $in) = @_;
-    # Name, description, location
-    $in->set_help('setupPrinterName') if $::isInstall;
-    my $default = $printer->{currentqueue}{'queue'};
-    $in->ask_from_
-	(
-	 { title => _("Enter Printer Name and Comments"),
-	   #cancel => !$printer->{configured}{$queue} ? '' : _("Remove queue"),
-	   callbacks => { complete => sub {
-	       unless ($printer->{currentqueue}{'queue'} =~ /^\w+$/) {
-		   $in->ask_warn('', _("Name of printer should contain only letters, numbers and the underscore"));
-		   return (1,0);
-	       }
-	       local $::isWizard = 0;
-	       if (($printer->{configured}{$printer->{currentqueue}{'queue'}})
-		   && ($printer->{currentqueue}{'queue'} ne $default) && 
-		   (!$in->ask_yesorno('', _("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
-					    $printer->{currentqueue}{'queue'}),
-				      0))) {
-		   return (1,0); # Let the user correct the name
-	       }
-	       return 0;
-	   },
-		      },
-	   messages =>
-_("Every printer needs a name (for example \"printer\"). The Description and Location fields do not need to be filled in. They are comments for the users.") }, 
-	 [ { label => _("Name of printer"), val => \$printer->{currentqueue}{'queue'} },
-	   { label => _("Description"), val => \$printer->{currentqueue}{'desc'} },
-	   { label => _("Location"), val => \$printer->{currentqueue}{'loc'} },
-	 ]) or return 0;
-
-    $printer->{QUEUE} = $printer->{currentqueue}{'queue'};
-    1;
-}
-
-sub get_db_entry {
-    my ($printer, $in) = @_;
-    #- Read the printer driver database if necessary
-    if ((keys %printer::thedb) == 0) {
-	my $w = $in->wait_message('', _("Reading printer database..."));
-        printer::read_printer_db($printer->{SPOOLER});
-    }
-    my $w = $in->wait_message('', _("Preparing printer database..."));
-    my $queue = $printer->{OLD_QUEUE};
-    if ($printer->{configured}{$queue}) {
-	# The queue was already configured
-	if ($printer->{configured}{$queue}{'queuedata'}{'foomatic'}) {
-	    # The queue was configured with Foomatic
-	    my $driverstr;
-	    if ($printer->{configured}{$queue}{'queuedata'}{'driver'} eq "Postscript") {
-		$driverstr = "PostScript";
-	    } else {
-		$driverstr = "GhostScript + $printer->{configured}{$queue}{'queuedata'}{'driver'}";
-	    }
-	    my $make = uc($printer->{configured}{$queue}{'queuedata'}{'make'});
-	    my $model =	$printer->{configured}{$queue}{'queuedata'}{'model'};
-	    if ($::expert) {
-		$printer->{DBENTRY} = "$make|$model|$driverstr";
-		# database key contains the "(recommended)" for the
-		# recommended driver, so add it if necessary
-		if (!($printer::thedb{$printer->{DBENTRY}}{printer})) {
-		    $printer->{DBENTRY} .= " (recommended)";
-		}
-	    } else {
-		$printer->{DBENTRY} = "$make|$model";
-	    }
-	    $printer->{OLD_CHOICE} = $printer->{DBENTRY};
-	} elsif (($printer->{SPOOLER} eq "cups") && ($::expert) &&
-		 ($printer->{configured}{$queue}{'queuedata'}{'ppd'})) {
-	    # Do we have a native CUPS driver or a PostScript PPD file?
-	    $printer->{DBENTRY} = printer::get_descr_from_ppd($printer) || $printer->{DBENTRY};
-	    $printer->{OLD_CHOICE} = $printer->{DBENTRY};
-	} else {
-	    # Point the list cursor at least to manufacturer and model of the
-	    # printer
-	    $printer->{DBENTRY} = "";
-	    my $make = uc($printer->{configured}{$queue}{'queuedata'}{'make'});
-	    my $model = $printer->{configured}{$queue}{'queuedata'}{'model'};
-	    my $key;
-	    for $key (keys %printer::thedb) {
-		if ((($::expert) && ($key =~ /^$make\|$model\|.*\(recommended\)$/)) ||
-		    ((!$::expert) && ($key =~ /^$make\|$model$/))) {
-		    $printer->{DBENTRY} = $key;
-		}
-	    }
-	    if ($printer->{DBENTRY} eq "") {
-		# Exact match of make and model did not work, try to clean
-		# up the model name
-		$model =~ s/PS//;
-		$model =~ s/PostScript//;
-		$model =~ s/Series//;
-		for $key (keys %printer::thedb) {
-		    if ((($::expert) && ($key =~ /^$make\|$model\|.*\(recommended\)$/)) ||
-			((!$::expert) && ($key =~ /^$make\|$model$/))) {
-			$printer->{DBENTRY} = $key;
-		    }
-		}
-	    }
-	    if (($printer->{DBENTRY} eq "") && ($make ne "")) {
-		# Exact match with cleaned-up model did not work, try a best match
-		my $matchstr = "$make|$model";
-		$printer->{DBENTRY} = bestMatchSentence($matchstr, keys %printer::thedb);
-		# If the manufacturer was not guessed correctly, discard the
-		# guess.
-		$printer->{DBENTRY} =~ /^([^\|]+)\|/;
-		my $guessedmake = lc($1);
-		if (($matchstr !~ /$guessedmake/i) &&
-		    (($guessedmake ne "hp") ||
-		     ($matchstr !~ /Hewlett[\s-]+Packard/i)))
-		{$printer->{DBENTRY} = ""};
-	    }
-	    # Set the OLD_CHOICE to a non-existing value
-	    $printer->{OLD_CHOICE} = "XXX";
-	}
-    } else {
-	if (($::expert) && ($printer->{DBENTRY} !~ /(recommended)/)) {
-	    my ($make, $model) = $printer->{DBENTRY} =~ /^([^\|]+)\|([^\|]+)\|/;
-	    for my $key (keys %printer::thedb) {
-		if ($key =~ /^$make\|$model\|.*\(recommended\)$/) {
-		    $printer->{DBENTRY} = $key;
-		}
-	    }
-	}
-	$printer->{OLD_CHOICE} = $printer->{DBENTRY};
-    }
-}
-
-sub is_model_correct {
-    my ($printer, $in) = @_;
-    $in->set_help('chooseModel') if $::isInstall;
-    my $dbentry = $printer->{DBENTRY};
-    $dbentry =~ s/\|/ /g;
-    my $res = $in->ask_from_list_
-	    (_("Your printer model"),
-	     _("Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \"The model is correct\" if so and if not, click \"Select model manually\" so that you can choose your printer model manually on the next screen.
-
-For your printer Printerdrake has found:
-
-%s", $dbentry),
-	     [_("The model is correct"),
-	      _("Select model manually")],
-	     ($printer->{MANUALMODEL} ? _("Select model manually") : 
-	      _("The model is correct")));
-    return 0 if !$res;
-    $printer->{MANUALMODEL} = ($res eq _("Select model manually"));
-    1;
-}
-
-sub choose_model {
-    my ($printer, $in) = @_;
-    $in->set_help('chooseModel') if $::isInstall;
-    #- Read the printer driver database if necessary
-    if ((keys %printer::thedb) == 0) {
-	my $w = $in->wait_message('', _("Reading printer database..."));
-        printer::read_printer_db($printer->{SPOOLER});
-    }
-    if (!$printer::thedb{$printer->{DBENTRY}}) {
-	$printer->{DBENTRY} = _("Raw printer (No driver)");
-    }
-    # Choose the printer/driver from the list
-    return ($printer->{DBENTRY} = $in->ask_from_treelist(_("Printer model selection"),
-							 _("Which printer model do you have?") .
-							 _("
-
-Please check whether Printerdrake did the auto-detection of your printer model correctly. Search the correct model in the list when the cursor is standing on a wrong model or on \"Raw printer\".") . " " .
-_("If your printer is not listed, choose a compatible (see printer manual) or a similar one."), '|',
-							 [ keys %printer::thedb ], $printer->{DBENTRY}));
-
-}
-
-sub get_printer_info {
-    my ($printer, $in) = @_;
-    #- Read the printer driver database if necessary
-    #if ((keys %printer::thedb) == 0) {
-    #    my $w = $in->wait_message('', _("Reading printer database..."));
-    #    printer::read_printer_db($printer->{SPOOLER});
-    #}
-    my $queue = $printer->{OLD_QUEUE};
-    my $oldchoice = $printer->{OLD_CHOICE};
-    my $newdriver = 0;
-    if ((!$printer->{configured}{$queue}) ||      # New queue  or
-	(($oldchoice) && ($printer->{DBENTRY}) && # make/model/driver changed
-	 (($oldchoice ne $printer->{DBENTRY}) ||
-	  ($printer->{currentqueue}{'driver'} ne 
-	   $printer::thedb{$printer->{DBENTRY}}{'driver'})))) {
-	delete($printer->{currentqueue}{printer});
-	delete($printer->{currentqueue}{ppd});
-	$printer->{currentqueue}{foomatic} = 0;
-	# Read info from printer database
-	foreach (qw(printer ppd driver make model)) { #- copy some parameter, shorter that way...
-	    $printer->{currentqueue}{$_} = $printer::thedb{$printer->{DBENTRY}}{$_};
-	}
-	$newdriver = 1;
-    }
-    # Use the "printer" and not the "foomatic" field to identify a Foomatic
-    # queue because in a new queue "foomatic" is not set yet.
-    if (($printer->{currentqueue}{'printer'}) || # We have a Foomatic queue
-	($printer->{currentqueue}{'ppd'})) { # We have a CUPS+PPD queue
-	if ($printer->{currentqueue}{'printer'}) { # Foomatic queue?
-	    # In case of a new queue "foomatic" was not set yet
-	    $printer->{currentqueue}{'foomatic'} = 1;
-	    # Now get the options for this printer/driver combo
-	    if (($printer->{configured}{$queue}) && ($printer->{configured}{$queue}{'queuedata'}{'foomatic'})) {
-		# The queue was already configured with Foomatic ...
-		if (!$newdriver) {
-		    # ... and the user didn't change the printer/driver
-		    $printer->{ARGS} = $printer->{configured}{$queue}{'args'};
-		} else {
-		    # ... and the user has chosen another printer/driver
-		    $printer->{ARGS} = printer::read_foomatic_options($printer);
-		}
-	    } else {
-		# The queue was not configured with Foomatic before
-		# Set some special options
-		$printer->{SPECIAL_OPTIONS} = '';
-		# Default page size depending on the country/language
-		# (US/Canada -> Letter, Others -> A4)
-		my $pagesize;
-		if ($printer->{PAPERSIZE}) {
-		    $printer->{SPECIAL_OPTIONS} .= 
-			" -o PageSize=$printer->{PAPERSIZE}";
-		} elsif (($pagesize = $in->{lang}) ||
-			 ($pagesize = $ENV{'LC_PAPER'}) ||
-			 ($pagesize = $ENV{'LANG'}) ||
-			 ($pagesize = $ENV{'LANGUAGE'}) ||
-			 ($pagesize = $ENV{'LC_ALL'})) {
-		    if (($pagesize =~ /^en_CA/) ||
-			($pagesize =~ /^fr_CA/) || 
-			($pagesize =~ /^en_US/)) {
-			$pagesize = "Letter";
-		    } else {
-			$pagesize = "A4";
-		    }
-		    $printer->{SPECIAL_OPTIONS} .= 
-			" -o PageSize=$pagesize";
-		}
-		# oki4w driver -> OKI winprinter which needs the
-		# oki4daemon to work
-		if ($printer->{currentqueue}{'driver'} eq 'oki4w') {
-		    if ($printer->{currentqueue}{'connect'} ne 
-			'file:/dev/lp0') {
-			$in->ask_warn(_("OKI winprinter configuration"),
-				      _("You are configuring an OKI laser winprinter. These printers\nuse a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver."));
-		    }
-		    $printer->{currentqueue}{'connect'} = 'file:/dev/null';
-		    # Start the oki4daemon
-		    printer::start_service_on_boot('oki4daemon');
-		    printer::start_service('oki4daemon');
-		    # Set permissions
-		    if ($printer->{SPOOLER} eq 'cups') {
-			printer::set_permissions('/dev/oki4drv', '660', 'lp',
-						 'sys');
-		    } elsif ($printer->{SPOOLER} eq 'pdq') {
-			printer::set_permissions('/dev/oki4drv', '666');
-		    } else {
-			printer::set_permissions('/dev/oki4drv', '660', 'lp',
-						 'lp');
-		    }
-		} elsif ($printer->{currentqueue}{'driver'} eq 'lexmarkinkjet') {
-		    # Set "Port" option
-		    if ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/lp0') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=ParPort1";
-		    } elsif ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/lp1') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=ParPort2";
-		    } elsif ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/lp2') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=ParPort3";
-		    } elsif ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/usb/lp0') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=USB1";
-		    } elsif ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/usb/lp1') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=USB2";
-		    } elsif ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/usb/lp2') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=USB3";
-		    } else {
-			$in->ask_warn(_("Lexmark inkjet configuration"),
-				      _("The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to."));
-			return 0;
-		    }
-		    # Set device permissions
-		    $printer->{currentqueue}{'connect'} =~ /^\s*file:(\S*)\s*$/;
-		    if ($printer->{SPOOLER} eq 'cups') {
-			printer::set_permissions($1, '660', 'lp', 'sys');
-		    } elsif ($printer->{SPOOLER} eq 'pdq') {
-			printer::set_permissions($1, '666');
-		    } else {
-			printer::set_permissions($1, '660', 'lp', 'lp');
-		    }
-		    # This is needed to have the device not blocked by the
-		    # spooler backend.
-		    $printer->{currentqueue}{'connect'} = 'file:/dev/null';
-		    #install packages
-		    my $drivertype = $printer->{currentqueue}{'model'};
-		    if ($drivertype eq 'Z22') {$drivertype = 'Z32';}
-		    if ($drivertype eq 'Z23') {$drivertype = 'Z33';}
-		    $drivertype = lc($drivertype);
-		    if (!printer::files_exist("/usr/local/lexmark/$drivertype/$drivertype")) {
-			eval { $in->do_pkgs->install("lexmark-drivers-$drivertype") };
-		    }
-		    if (!printer::files_exist("/usr/local/lexmark/$drivertype/$drivertype")) {
-			# Driver installation failed, probably we do not have
-			# the commercial CDs
-			$in->ask_warn(_("Lexmark inkjet configuration"),
-				      _("To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Go to the US site and click on the \"Drivers\" button. Then choose your model and afterwards \"Linux\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and adjust the head alignment settings with this program."));
-		    }
-		}
-		$printer->{ARGS} = printer::read_foomatic_options($printer);
-		delete($printer->{SPECIAL_OPTIONS});
-	    }
-	} elsif ($printer->{currentqueue}{'ppd'}) { # CUPS+PPD queue?
-	    # If we had a Foomatic queue before, unmark the flag and initialize
-	    # the "printer" and "driver" fields
-	    $printer->{currentqueue}{'foomatic'} = 0;
-	    $printer->{currentqueue}{'printer'} = undef;
-	    $printer->{currentqueue}{'driver'} = "CUPS/PPD";
-	    # Now get the options from this PPD file
-	    if ($printer->{configured}{$queue}) {
-		# The queue was already configured
-		if ((!$printer->{DBENTRY}) || (!$oldchoice) ||
-		    ($printer->{DBENTRY} eq $oldchoice)) {
-		    # ... and the user didn't change the printer/driver
-		    $printer->{ARGS} = printer::read_cups_options($queue);
-		} else {
-		    # ... and the user has chosen another printer/driver
-		    $printer->{ARGS} = printer::read_cups_options("/usr/share/cups/model/$printer->{currentqueue}{ppd}");
-		}
-	    } else {
-		# The queue was not configured before
-		$printer->{ARGS} = printer::read_cups_options("/usr/share/cups/model/$printer->{currentqueue}{ppd}");
-	    }
-	}
-    }
-    1;
-}
-
-sub setup_options {
-    my ($printer, $in) = @_;
-    my @simple_options = 
-	("PageSize",        # Media properties
-	 "MediaType",
-	 "Form",
-	 "InputSlot",       # Trays
-	 "Tray",
-	 "OutBin",
-	 "OutputBin",
-	 "FaceUp",
-	 "FaceDown",
-	 "Collate",
-	 "Manual",
-	 "ManualFeed",
-	 "Manualfeed",
-	 "ManualFeeder",
-	 "Feeder",
-	 "Duplex",          # Double-sided printing
-	 "Binding",
-	 "Tumble",
-	 "DoubleSided",
-	 "Resolution",      # Resolution/Quality
-	 "GSResolution",
-	 "JCLResolution",
-	 "Quality",
-	 "PrintQuality",
-	 "PrintoutQuality",
-	 "QualityType",
-	 "ImageType",
-	 "stpImageType",
-	 "InkType",         # Colour/Gray/BW, 4-ink/6-ink
-	 "stpInkType",
-	 "Mode",
-	 "OutputMode",
-	 "OutputType",
-	 "ColorMode",
-	 "ColorModel",
-	 "PrintingMode",
-	 "Monochrome",
-	 "BlackOnly",
-	 "Grayscale",
-	 "GrayScale",
-	 "Colour",
-	 "Color",
-	 "Gamma",           # Lighter/Darker
-	 "GammaCorrection",
-	 "GammaGeneral",
-	 "MasterGamma",
-	 "StpGamma",
-	 "stpGamma",
-	 "EconoMode",       # Ink/Toner saving
-	 "Economode",
-	 "TonerSaving",
-	 "JCLEconomode",
-	 "HPNup",           # Other useful options
-	 "InstalledMemory", # Laser printer hardware config
-	 "Option1",
-	 "Option2",
-	 "Option3",
-	 "Option4",
-	 "Option5",
-	 "Option6",
-	 "Option7",
-	 "Option8",
-	 "Option9",
-	 "Option10",
-	 "Option11",
-	 "Option12",
-	 "Option13",
-	 "Option14",
-	 "Option15",
-	 "Option16",
-	 "Option17",
-	 "Option18",
-	 "Option19",
-	 "Option20",
-	 "Option21",
-	 "Option22",
-	 "Option23",
-	 "Option24",
-	 "Option25",
-	 "Option26",
-	 "Option27",
-	 "Option28",
-	 "Option29",
-	 "Option30"
-	 );
-    $in->set_help('setupOptions') if $::isInstall;
-    if (($printer->{currentqueue}{'printer'}) || # We have a Foomatic queue
-	($printer->{currentqueue}{'ppd'})) { # We have a CUPS+PPD queue
-	# Set up the widgets for the option dialog
-	my @widgets;
-	my @userinputs;
-	my @choicelists;
-	my @shortchoicelists;
-	my $i;
-	for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
-	    my $optshortdefault = $printer->{ARGS}[$i]{'default'};
-	    if ($printer->{ARGS}[$i]{'type'} eq 'enum') {
-		# enumerated option
-		push(@choicelists, []);
-		push(@shortchoicelists, []);
-		my $choice;
-		for $choice (@{$printer->{ARGS}[$i]{'vals'}}) {
-		    push(@{$choicelists[$i]}, $choice->{'comment'});
-		    push(@{$shortchoicelists[$i]}, $choice->{'value'});
-		    if ($choice->{'value'} eq $optshortdefault) {
-			push(@userinputs, $choice->{'comment'});
-		    }
-		}
-		push(@widgets,
-		     { label => $printer->{ARGS}[$i]{'comment'}, 
-		       val => \$userinputs[$i], 
-		       not_edit => 1,
-		       list => \@{$choicelists[$i]},
-		       advanced => !member($printer->{ARGS}[$i]{'name'},
-					   @simple_options) });
-	    } elsif ($printer->{ARGS}[$i]{'type'} eq 'bool') {
-		# boolean option
-		push(@choicelists, [$printer->{ARGS}[$i]{'name'}, 
-				    $printer->{ARGS}[$i]{'name_false'}]);
-		push(@shortchoicelists, []);
-		push(@userinputs, $choicelists[$i][1-$optshortdefault]);
-		push(@widgets,
-		     { label => $printer->{ARGS}[$i]{'comment'},
-		       val => \$userinputs[$i],
-		       not_edit => 1,
-		       list => \@{$choicelists[$i]},
-		       advanced => !member($printer->{ARGS}[$i]{'name'},
-					   @simple_options) });
-	    } else {
-		# numerical option
-		push(@choicelists, []);
-		push(@shortchoicelists, []);
-		push(@userinputs, $optshortdefault);
-		push(@widgets,
-		     { label => $printer->{ARGS}[$i]{'comment'} . 
-			   " ($printer->{ARGS}[$i]{'min'}... " .
-			       "$printer->{ARGS}[$i]{'max'})",
-			   #type => 'range',
-			   #min => $printer->{ARGS}[$i]{'min'},
-			   #max => $printer->{ARGS}[$i]{'max'},
-			   val => \$userinputs[$i],
-			   advanced => !member($printer->{ARGS}[$i]{'name'},
-					       @simple_options) });
-	    }
-	}
-	# Show the options dialog. The call-back function does a
-	# range check of the numerical options.
-	my $windowtitle = "$printer->{currentqueue}{'make'} $printer->{currentqueue}{'model'}";
-	if ($::expert) {
-	    my $driver = undef;
-	    if ($driver = $printer->{currentqueue}{driver}) {
-		if ($printer->{currentqueue}{foomatic}) {
-		    if ($driver eq 'Postscript') {
-			$driver = "PostScript";
-		    } else {
-			$driver = "GhostScript + $driver";
-		    }
-		} elsif ($printer->{currentqueue}{ppd}) {
-		    if ($printer->{DBENTRY}) {
-			$printer->{DBENTRY} =~ /^[^\|]*\|[^\|]*\|(.*)$/;
-			$driver = $1;
-		    } else {
-			$driver = printer::get_descr_from_ppd($printer);
-			if ($driver =~ /^[^\|]*\|[^\|]*$/) { # No driver info
-			    $driver = "CUPS/PPD";
-			} else {
-			    $driver =~ /^[^\|]*\|[^\|]*\|(.*)$/;
-			    $driver = $1;
-			}
-		    }
-		}
-	    } 
-	    if ($driver) {
-		$windowtitle .= ", $driver";
-	    }
-	}
-	# Do not show the options setup dialog when installing a new printer
-	# in recommended mode without "Manual configuration" turned on.
-	if ((!$printer->{NEW}) or ($::expert) or ($printer->{MANUAL})) {
-	    return 0 if !$in->ask_from
-		($windowtitle,
-		 _("Printer default settings
-
-You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower."),
-		 \@widgets,
-		 complete => sub {
-		     my $i;
-		     for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
-			 if (($printer->{ARGS}[$i]{'type'} eq 'int') || ($printer->{ARGS}[$i]{'type'} eq 'float')) {
-			     unless (($printer->{ARGS}[$i]{'type'} ne 'int') || ($userinputs[$i] =~ /^[\-\+]?[0-9]+$/)) {
-				 $in->ask_warn('', _("Option %s must be an integer number!", $printer->{ARGS}[$i]{'comment'}));
-				 return (1, $i);
-			     }
-			     unless (($printer->{ARGS}[$i]{'type'} ne 'float') || ($userinputs[$i] =~ /^[\-\+]?[0-9\.]+$/)) {
-				 $in->ask_warn('', _("Option %s must be a number!", $printer->{ARGS}[$i]{'comment'}));
-				 return (1, $i);
-			     }
-			     unless (($userinputs[$i] >= $printer->{ARGS}[$i]{'min'}) &&
-				     ($userinputs[$i] <= $printer->{ARGS}[$i]{'max'})) {
-				 $in->ask_warn('', _("Option %s out of range!", $printer->{ARGS}[$i]{'comment'}));
-				 return (1, $i);
-			     }
-			 }
-		     }
-		     return (0);
-		 } );
-	}
-	# Read out the user's choices and generate the appropriate command
-	# line arguments
-	@{$printer->{currentqueue}{options}} = ();
-	for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
-	    push(@{$printer->{currentqueue}{options}}, "-o");
-	    if ($printer->{ARGS}[$i]{'type'} eq 'enum') {
-		# enumerated option
-		my $j;
-		for ($j = 0; $j <= $#{$choicelists[$i]}; $j++) {
-		    if ($choicelists[$i][$j] eq $userinputs[$i]) {
-			push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{'name'} . "=". $shortchoicelists[$i][$j]);
-		    }
-		}
-	    } elsif ($printer->{ARGS}[$i]{'type'} eq 'bool') {
-		# boolean option
-		push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{'name'} . "=".
-		     (($choicelists[$i][0] eq $userinputs[$i]) ? "1" : "0"));
-	    } else {
-		# numerical option
-		push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{'name'} . "=" . $userinputs[$i]);
-	    }
-	}
-    }
-    1;
-}
-
-sub setasdefault {
-    my ($printer, $in) = @_;
-    $in->set_help('setupAsDefault') if $::isInstall;
-    if (($printer->{DEFAULT} eq '') || # We have no default printer,
-	                               # so set the current one as default
-	($in->ask_yesorno('', _("Do you want to set this printer (\"%s\")\nas the default printer?", $printer->{QUEUE}), 0))) { # Ask the user
-	$printer->{DEFAULT} = $printer->{QUEUE};
-        printer::set_default_printer($printer);
-    }
-}
-	
-sub print_testpages {
-    my ($printer, $in, $upNetwork) = @_;
-    $in->set_help('printTestPages') if $::isInstall;
-    # print test pages
-    my $standard = 1;
-    my $altletter = 0;
-    my $alta4 = 0;
-    my $photo = 0;
-    my $ascii = 0;
-    my $res2 = 0;
-    my $res1 = $in->ask_from_
-	({ title => _("Test pages"),
-	   messages => _("Please select the test pages you want to print.
-Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page."),
-          cancel => ((!$printer->{NEW}) ?
-		     _("Cancel") : ($::isWizard ? _("<- Previous") : 
-				    _("No test pages"))),
-          ok => ($::isWizard ? _("Next ->") : _("Print"))},
-	 [
-	  { text => _("Standard test page"), type => 'bool',
-	    val => \$standard },
-	  ($::expert ?
-	   { text => _("Alternative test page (Letter)"), type => 'bool', 
-	     val => \$altletter } : ()),
-	  ($::expert ?
-	   { text => _("Alternative test page (A4)"), type => 'bool', 
-	     val => \$alta4 } : ()), 
-	  { text => _("Photo test page"), type => 'bool', val => \$photo },
-	  #{ text => _("Plain text test page"), type => 'bool',
-	  #  val => \$ascii }
-	  ($::isWizard ?
-	   { text => _("Do not print any test page"), type => 'bool', 
-	     val => \$res2 } : ())
-	  ]);
-    $res2 = 1 if (!($standard || $altletter || $alta4 || $photo ||
-		    $ascii));
-    if ($res1 && !$res2) {
-	my @lpq_output;
-	{
-	    my $w = $in->wait_message('', _("Printing test page(s)..."));
-	    
-	    $upNetwork and do { &$upNetwork(); undef $upNetwork; sleep(1) };
-	    my $stdtestpage = "/usr/share/printer-testpages/testprint.ps";
-	    my $altlttestpage = "/usr/share/printer-testpages/testpage.ps";
-	    my $alta4testpage = "/usr/share/printer-testpages/testpage-a4.ps";
-	    my $phototestpage = "/usr/share/printer-testpages/photo-testpage.jpg";
-	    my $asciitestpage = "/usr/share/printer-testpages/testpage.asc";
-	    my @testpages;
-	    # Install the filter to convert the photo test page to PS
-	    if (($photo) && (!$::testing) &&
-		(!printer::files_exist((qw(/usr/bin/convert))))) {
-		$in->do_pkgs->install('ImageMagick');
-	    }
-	    # set up list of pages to print
-	    $standard && push (@testpages, $stdtestpage);
-	    $altletter && push (@testpages, $altlttestpage);
-	    $alta4 && push (@testpages, $alta4testpage);
-	    $photo && push (@testpages, $phototestpage);
-	    $ascii && push (@testpages, $asciitestpage);
-	    # print the stuff
-	    @lpq_output = printer::print_pages($printer, @testpages);
-	}
-	my $dialogtext;
-	if (@lpq_output) {
-	    $dialogtext = _("Test page(s) have been sent to the printer.
-It may take some time before the printer starts.
-Printing status:\n%s\n\n", @lpq_output);
-	} else {
-	    $dialogtext = _("Test page(s) have been sent to the printer.
-It may take some time before the printer starts.\n");
-	}
-	if ($printer->{NEW} == 0) {
-	    $in->ask_warn('',$dialogtext);
-	    return 1;
-	} else {
-	    $in->ask_yesorno('',$dialogtext . _("Did it work properly?"), 1) 
-		and return 1;
-	}
-    } else {
-	return ($::isWizard ? $res1 : 1) ;
-    }
-    return 2;
-}
-
-sub printer_help {
-    my ($printer, $in) = @_;
-    my $spooler = $printer->{SPOOLER};
-    my $queue = $printer->{QUEUE};
-    my $default = $printer->{DEFAULT};
-    my $raw = 0;
-    my $cupsremote = 0;
-    my $scanning = "";
-    if ($printer->{configured}{$queue}) {
-	if (($printer->{configured}{$queue}{'queuedata'}{'model'} eq
-	     _("Unknown model")) ||
-	    ($printer->{configured}{$queue}{'queuedata'}{'model'} eq
-	     _("Raw printer"))) {
-	    $raw = 1;
-	}
-	# Information about scanning with HP's multi-function devices
-	$scanning = scanner_help
-	    ($printer->{configured}{$queue}{'queuedata'}{'make'} . " " .
-	     $printer->{configured}{$queue}{'queuedata'}{'model'}, 
-	     $printer->{configured}{$queue}{'queuedata'}{'connect'});
-	if ($scanning) {
-	    $scanning = "\n\n$scanning\n\n";
-	}
-    } else {
-	$cupsremote = 1;
-    }
-
-    my $dialogtext;
-    if ($spooler eq "cups") {
-	$dialogtext =
-_("To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"kprinter <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily.
-", ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-_("These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.
-") .
-(!$raw ?
-_("
-The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -o option=setting -o switch" : "lpr -o option=setting -o switch")) .
-(!$cupsremote ?
- _("To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s
-
-", $scanning) . printer::lphelp_output($printer) : $scanning .
- _("Here is a list of the available printing options for the current printer:
-
-") . printer::lphelp_output($printer)) : $scanning);
-    } elsif ($spooler eq "lprng") {
-	$dialogtext =
-_("To print a file from the command line (terminal window) use the command \"%s <file>\".
-", ($queue ne $default ? "lpr -P $queue" : "lpr")) . 
-_("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
-") .
-(!$raw ?
-_("
-The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -Z option=setting -Z switch" : "lpr -Z option=setting -Z switch")) .
-_("To get a list of the options available for the current printer click on the \"Print option list\" button." . $scanning) : $scanning);
-    } elsif ($spooler eq "lpd") {
-	$dialogtext =
-_("To print a file from the command line (terminal window) use the command \"%s <file>\".
-", ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-_("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
-") .
-(!$raw ?
-_("
-The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -o option=setting -o switch" : "lpr -o option=setting -o switch")) .
-_("To get a list of the options available for the current printer click on the \"Print option list\" button." . $scanning) : $scanning);
-    } elsif ($spooler eq "pdq") {
-	$dialogtext =
-_("To print a file from the command line (terminal window) use the command \"%s <file>\" or \"%s <file>\".
-", ($queue ne $default ? "pdq -P $queue" : "pdq"), ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-_("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
-") .
-_("You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.
-If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.
-") .
-(!$raw ?
-_("
-The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\".
-", "pdq", "lpr", ($queue ne $default ? "pdq -P $queue -aoption=setting -oswitch" : "pdq -aoption=setting -oswitch")) .
-_("To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s
-
-", $scanning) . printer::pdqhelp_output($printer) : $scanning);
-    }
-    if (!$raw && !$cupsremote) {
-        my $choice;
-        while ($choice ne _("Close")) {
-	    $choice = $in->ask_from_list_
-	        (($scanning ?
-		  _("Printing/Scanning on \"%s\"", $queue) :
-		  _("Printing on the printer \"%s\"", $queue)),
-		 $dialogtext,
-		 [ _("Print option list"), _("Close") ],
-		 _("Close"));
-	    if ($choice ne _("Close")) {
-		my $w = $in->wait_message('', _("Printing test page(s)..."));
-	        printer::print_optionlist($printer);
-	    }
-	}
-    } else {
-	$in->ask_warn(($scanning ?
-		       _("Printing/Scanning on \"%s\"", $queue) :
-		       _("Printing on the printer \"%s\"", $queue)), 
-		      $dialogtext);
-    }
-}
-
-sub scanner_help {
-    my ($makemodel, $deviceuri) = @_;
-    if ($deviceuri =~ m!^ptal:/(.*)$!) {
-	my $ptaldevice = $1;
-	if (($makemodel =~ /HP\s+OfficeJet\s+[KVRGPD]/i) ||
-	    ($makemodel =~ /HP\s+PSC\s+[579]/i)) {
-	    # SANE-driven models
-	    return _("Your HP multi-function device was configured automatically to be able to scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line to get more information.
-
-Do not use \"scannerdrake\" for this device!",
-		     $ptaldevice);
-	} elsif (($makemodel !~ /HP\s+PhotoSmart/i) &&
-		 ($makemodel !~ /HP\s+LaserJet\s+2200/i)) {
-	    # "ptal-hp"-driven models
-	    return _("Your HP multi-function device was configured automatically to be able to scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". Scanning via a graphical interface or from the GIMP is not supported yet for your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or 1200 you can only scan when you have the scanner option installed.
-
-Do not use \"scannerdrake\" for this device!",
-		     $ptaldevice);
-	} else {
-	    return "";
-	}
-    }
-}
-
-sub copy_queues_from {
-    my ($printer, $in, $oldspooler) = @_;
-
-    $in->set_help('copyQueues') if $::isInstall;
-    my $newspooler = $printer->{SPOOLER};
-    my @oldqueues;
-    my @queueentries;
-    my @queuesselected;
-    my $newspoolerstr;
-    my $oldspoolerstr;
-    my $noninteractive = 0;
-    {
-	my $w = $in->wait_message('', _("Reading printer data..."));
-	@oldqueues = printer::get_copiable_queues($oldspooler, $newspooler);
-	@oldqueues = sort(@oldqueues);
-	$newspoolerstr = $printer::shortspooler_inv{$newspooler};
-	$oldspoolerstr = $printer::shortspooler_inv{$oldspooler};
-	for (@oldqueues) {
-	    push (@queuesselected, 1);
-	    push (@queueentries, { text => $_, type => 'bool', 
-				   val => \$queuesselected[$#queuesselected] });
-	}
-	# LPRng and LPD use the same config files, therefore one sees the 
-	# queues of LPD when one uses LPRng and vice versa, but these queues
-	# do not work. So automatically transfer all queues when switching
-	# between LPD and LPRng.
-	if (($oldspooler =~ /^lp/) && ($newspooler =~ /^lp/)) {
-	    $noninteractive = 1;
-	}
-    }
-    if ($noninteractive ||
-	$in->ask_from_
-	({ title => _("Transfer printer configuration"),
-	   messages => _("You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.
-Not all queues can be transferred due to the following reasons:
-", $oldspoolerstr, $newspoolerstr) .
-($newspooler eq "cups" ? _("CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.
-") :
- ($newspooler eq "pdq" ? _("PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.
-") :
-  _("LPD and LPRng do not support IPP printers.
-"))) .
-_("In addition, queues not created with this program or \"foomatic-configure\" cannot be transferred.") .
-($oldspooler eq "cups" ? _("
-Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred.") : ()) . _("
-Mark the printers which you want to transfer and click 
-\"Transfer\"."),
-	   cancel => _("Do not transfer printers"),
-           ok => _("Transfer")
-	 },
-         \@queueentries
-      )) {
-	my $queuecopied = 0;
-	for (@oldqueues) {
-	    if (shift(@queuesselected)) {
-                my $oldqueue = $_;
-                my $newqueue = $_;
-                if ((!$printer->{configured}{$newqueue}) ||
-		    ($noninteractive) ||
-		    ($in->ask_from_
-	             ({ title => _("Transfer printer configuration"),
-	                messages => _("A printer named \"%s\" already exists under %s. 
-Click \"Transfer\" to overwrite it.
-You can also type a new name or skip this printer.", 
-				      $newqueue, $newspoolerstr),
-                        ok => _("Transfer"),
-                        cancel => _("Skip"),
-		        callbacks => { complete => sub {
-	                    unless ($newqueue =~ /^\w+$/) {
-				$in->ask_warn('', _("Name of printer should contain only letters, numbers and the underscore"));
-				return (1,0);
-			    }
-			    if (($printer->{configured}{$newqueue})
-				&& ($newqueue ne $oldqueue) && 
-				(!$in->ask_yesorno('', _("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
-							 $newqueue),
-						   0))) {
-				return (1,0); # Let the user correct the name
-			    }
-			    return 0;
-			}}
-		    },
-		      [{label => _("New printer name"),val => \$newqueue}]))) {
-		    {
-			my $w = $in->wait_message('', 
-			   _("Transferring %s...", $oldqueue));
-		        printer::copy_foomatic_queue($printer, $oldqueue,
-						   $oldspooler, $newqueue) and
-							 $queuecopied = 1;
-		    }
-		    if ($oldqueue eq $printer->{DEFAULT}) {
-			# Make the former default printer the new default
-			# printer if the user does not reject
-			if (($noninteractive) ||
-			    ($in->ask_yesorno
-			     (_("Transfer printer configuration"),
-			      _("You have transferred your former default printer (\"%s\"), Should it be also the default printer under the new printing system %s?", $oldqueue, $newspoolerstr), 1))) {
-			    $printer->{DEFAULT} = $newqueue;
-			    printer::set_default_printer($printer);
-			}
-		    }
-		}
-            }
-	}
-        if ($queuecopied) {
-	    my $w = $in->wait_message('', _("Refreshing printer data..."));
-	    printer::read_configured_queues($printer);
-        }
-    }
-}
-
-sub start_network {
-    my ($in, $upNetwork) = @_;
-    my $w = $in->wait_message(_("Configuration of a remote printer"), 
-			      _("Starting network..."));
-    if ($::isInstall) {
-	return ($upNetwork and 
-		do { my $ret = &$upNetwork(); 
-		     undef $upNetwork; 
-		     sleep(1);
-		     $ret});
-    } else {
-	return printer::start_service("network");
-    }
-}
-
-sub check_network {
-
-    # This routine is called whenever the user tries to configure a remote
-    # printer. It checks the state of the network functionality to assure
-    # that the network is up and running so that the remote printer is
-    # reachable.
-
-    my ($printer, $in, $upNetwork) = @_;
-
-    # Any additional dialogs caused by this subroutine should appear as
-    # extra windows and not embedded in the "Add printer" wizard.
-    local $::isWizard = 0;
-
-    $in->set_help('checkNetwork') if $::isInstall;
-
-    # First check: Does /etc/sysconfig/network-scripts/draknet_conf exist
-    # (otherwise the network is not configured yet and draknet has to be
-    # started)
-
-    if (!printer::files_exist("/etc/sysconfig/network-scripts/draknet_conf")) {
-	my $go_on = 0;
-	while (!$go_on) {
-	    my $choice = _("Configure the network now");
-	    if ($in->ask_from(_("Network functionality not configured"),
-			      _("You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?"),
-			      [ { val => \$choice, type => 'list',
-				  list => [ _("Configure the network now"),
-					    _("Go on without configuring the network") ]} ] )) {
-		if ($choice eq _("Configure the network now")){
-		    if ($::isInstall) {
-			require network::netconnect;
-		        network::netconnect::main
-			    ($in->{prefix}, $in->{netcnx} ||= {}, 
-			     $in->{netc}, $in->{mouse}, $in, 
-			     $in->{intf}, 0,
-			     $in->{lang} eq "fr_FR" && 
-			     $in->{keyboard} eq "fr", 0);
-		    } else {
-			system("/usr/sbin/draknet");
-		    }
-		    if (printer::files_exist("/etc/sysconfig/network-scripts/draknet_conf")) {
-			$go_on = 1;
-		    }
-		} else {
-		    return 1;
-		}
-	    } else {
-		return 0;
-	    }
-	}
-    }
-
-    # Second check: Is the network running?
-
-    if (printer::network_running()) {return 1;}
-
-    # The network is configured now, start it.
-    if (!start_network($in, $upNetwork)) {
-	$in->ask_warn(_("Configuration of a remote printer"), 
-($::isInstall ?
-_("The network configuration done during the installation cannot be started now. Please check whether the network gets accessable after booting your system and correct the configuration using the Mandrake Control Center, section \"Network & Internet\"/\"Connection\", and afterwards set up the printer, also using the Mandrake Control Center, section \"Hardware\"/\"Printer\"") :
-_("The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again.")));
-	return 0;
-    }
-
-    # Give a SIGHUP to the daemon and in case of CUPS do also the
-    # automatic configuration of broadcasting/access permissions
-    # The daemon is not really restarted but only SIGHUPped to not
-    # interrupt print jobs.
-
-    my $w = $in->wait_message(_("Configuration of a remote printer"), 
-			      _("Restarting printing system..."));
-
-    return printer::SIGHUP_daemon($printer->{SPOOLER});
-
-}
-
-sub security_check {
-    # Check the security mode and when in "high" or "paranoid" mode ask the
-    # user whether he really wants to configure printing.
-    my ($printer, $in, $spooler) = @_;
-
-    # Any additional dialogs caused by this subroutine should appear as
-    # extra windows and not embedded in the "Add printer" wizard.
-    local $::isWizard = 0;
-
-    $in->set_help('securityCheck') if $::isInstall;
-
-    # Get security level
-    my $security = undef;
-    if ($::isInstall) {
-	$security = $in->{'security'};
-    } else {
-	$security = printer::get_security_level();
-    }
-
-    # Exit silently if the spooler is PDQ
-    if ($spooler eq "pdq") {return 1;}
-
-    # Exit silently in medium or lower security levels
-    if ((!$security) || ($security < 4)) {return 1;}
-    
-    # Exit silently if the current spooler is already activated for the current
-    # security level
-    if (printer::spooler_in_security_level($spooler, $security)) {return 1;}
-
-    # Tell user in which security mode he is and ask him whether he really
-    # wants to activate the spooler in the given security mode. Stop the
-    # operation of installing the spooler if he disagrees.
-    my $securitystr = ($security == 4 ? _("high") : _("paranoid"));
-    if ($in->ask_yesorno(_("Installing a printing system in the %s security level", $securitystr),
-			 _("You are about to install the printing system %s on a system running in the %s security level.
-
-This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessable by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.
-
-Do you really want to configure printing on this machine?",
-			   $printer::shortspooler_inv{$spooler},
-			   $securitystr))) {
-        printer::add_spooler_to_security_level($spooler, $security);
-	my $service;
-	if (($spooler eq "lpr") || ($spooler eq "lprng")) {
-	    $service = "lpd";
-	} else {
-	    $service = $spooler;
-	}
-        printer::start_service_on_boot($service);
-	return 1;
-    } else {
-	return 0;
-    }
-}
-
-sub start_spooler_on_boot {
-    # Checks whether the spooler will be started at boot time and if not,
-    # ask the user whether he wants to start the spooler at boot time.
-    my ($printer, $in, $service) = @_;
-
-    # Any additional dialogs caused by this subroutine should appear as
-    # extra windows and not embedded in the "Add printer" wizard.
-    local $::isWizard = 0;
-
-    $in->set_help('startSpoolerOnBoot') if $::isInstall;
-    if (!printer::service_starts_on_boot($service)) {
-	if ($in->ask_yesorno(_("Starting the printing system at boot time"),
-			     _("The printing system (%s) will not be started automatically when the machine is booted.
-
-It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.
-
-Do you want to have the automatic starting of the printing system turned on again?",
-		       $printer::shortspooler_inv{$printer->{SPOOLER}}))) {
-	    printer::start_service_on_boot($service);
-	}
-    }
-    1;
-}
-
-sub install_spooler {
-    # installs the default spooler and start its daemon
-    my ($printer, $in, $upNetwork) = @_;
-    if (!$::testing) {
-	# If the user refuses to install the spooler in high or paranoid
-	# security level, exit.
-	if (!security_check($printer, $in, $printer->{SPOOLER})) {
-	    return 0;
-	}
-	if ($printer->{SPOOLER} eq "cups") {
-	    {
-		my $w = $in->wait_message('', _("Checking installed software..."));
-		if ((!$::testing) &&
-		    (!printer::files_exist((qw(/usr/lib/cups/cgi-bin/printers.cgi
-					       /sbin/ifconfig
-					       /usr/bin/xpp
-					       /usr/bin/curl),
-					    ($::expert ? 
-					     "/usr/share/cups/model/postscript.ppd.gz" : ())
-					    )))) {
-		    $in->do_pkgs->install(('cups', 'net-tools', 'xpp',
-					   'curl',
-					   ($::expert ? 'cups-drivers' : ())));
-		}
-		# Try to start the network when CUPS is the spooler, so that
-		# remote CUPS printers get displayed (especially during
-		# installation)
-		$upNetwork and do {
-		    &$upNetwork(); 
-		    undef $upNetwork; 
-		    sleep(1);
-		};
-		# Start daemon
-	        printer::start_service("cups");
-		# Set the CUPS tools as defaults for "lpr", "lpq", "lprm", ...
-	        printer::set_alternative("lpr","/usr/bin/lpr-cups");
-	        printer::set_alternative("lpq","/usr/bin/lpq-cups");
-	        printer::set_alternative("lprm","/usr/bin/lprm-cups");
-	        printer::set_alternative("lp","/usr/bin/lp-cups");
-	        printer::set_alternative("cancel","/usr/bin/cancel-cups");
-	        printer::set_alternative("lpstat","/usr/bin/lpstat-cups");
-	        printer::set_alternative("lpc","/usr/sbin/lpc-cups");
-		# Remove PDQ panic buttons from the user's KDE Desktops
-	        printer::pdq_panic_button("remove");
-	    }
-	    # Should it be started at boot time?
-	    start_spooler_on_boot($printer, $in, "cups");
-	} elsif ($printer->{SPOOLER} eq "lpd") {
-	    {
-		my $w = $in->wait_message('', _("Checking installed software..."));
-		# "lpr" conflicts with "LPRng", remove "LPRng"
-		if ((!$::testing) &&
-		    (printer::files_exist((qw(/usr/lib/filters/lpf))))) {
-		    my $w = $in->wait_message('', _("Removing LPRng..."));
-		    $in->do_pkgs->remove_nodeps('LPRng');
-		}
-		if ((!$::testing) &&
-		    (!printer::files_exist((qw(/usr/sbin/lpf
-					       /usr/sbin/lpd
-					       /sbin/ifconfig
-					       /usr/bin/gpr
-					       /usr/bin/a2ps
-					       /usr/bin/convert))))) {
-		    $in->do_pkgs->install(('lpr', 'net-tools', 'gpr', 'a2ps', 'ImageMagick'));
-		}
-		# Start daemon
-	        printer::restart_service("lpd");
-		# Set the LPD tools as defaults for "lpr", "lpq", "lprm", ...
-	        printer::set_alternative("lpr","/usr/bin/lpr-lpd");
-	        printer::set_alternative("lpq","/usr/bin/lpq-lpd");
-	        printer::set_alternative("lprm","/usr/bin/lprm-lpd");
-	        printer::set_alternative("lpc","/usr/sbin/lpc-lpd");
-		# Remove PDQ panic buttons from the user's KDE Desktops
-	        printer::pdq_panic_button("remove");
-	    }
-	    # Should it be started at boot time?
-	    start_spooler_on_boot($printer, $in, "lpd");
-	} elsif ($printer->{SPOOLER} eq "lprng") {
-	    {
-		my $w = $in->wait_message('', _("Checking installed software..."));
-		# "LPRng" conflicts with "lpr", remove "lpr"
-		if ((!$::testing) &&
-		    (printer::files_exist((qw(/usr/sbin/lpf))))) {
-		    my $w = $in->wait_message('', _("Removing LPD..."));
-		    $in->do_pkgs->remove_nodeps('lpr');
-		}
-		if ((!$::testing) &&
-		    (!printer::files_exist((qw(/usr/lib/filters/lpf
-					       /usr/sbin/lpd
-					       /sbin/ifconfig
-					       /usr/bin/gpr
-					       /usr/bin/a2ps
-					       /usr/bin/convert))))) {
-		    $in->do_pkgs->install('LPRng', 'net-tools', 'gpr', 'a2ps', 'ImageMagick');
-		}
-		# Start daemon
-	        printer::restart_service("lpd");
-		# Set the LPRng tools as defaults for "lpr", "lpq", "lprm", ...
-	        printer::set_alternative("lpr","/usr/bin/lpr-lpd");
-	        printer::set_alternative("lpq","/usr/bin/lpq-lpd");
-	        printer::set_alternative("lprm","/usr/bin/lprm-lpd");
-	        printer::set_alternative("lp","/usr/bin/lp-lpd");
-	        printer::set_alternative("cancel","/usr/bin/cancel-lpd");
-	        printer::set_alternative("lpstat","/usr/bin/lpstat-lpd");
-	        printer::set_alternative("lpc","/usr/sbin/lpc-lpd");
-		# Remove PDQ panic buttons from the user's KDE Desktops
-	        printer::pdq_panic_button("remove");
-	    }
-	    # Should it be started at boot time?
-	    start_spooler_on_boot($printer, $in, "lpd");
-	} elsif ($printer->{SPOOLER} eq "pdq") {
-	    {
-		my $w = $in->wait_message('', _("Checking installed software..."));
-		if ((!$::testing) &&
-		    (!printer::files_exist((qw(/usr/bin/pdq
-					       /usr/X11R6/bin/xpdq))))) {
-		    $in->do_pkgs->install('pdq');
-		}
-		# PDQ has no daemon, so nothing needs to be started
-		
-		# Set the PDQ tools as defaults for "lpr", "lpq", "lprm", ...
-	        printer::set_alternative("lpr","/usr/bin/lpr-pdq");
-	        printer::set_alternative("lpq","/usr/bin/lpq-foomatic");
-	        printer::set_alternative("lprm","/usr/bin/lprm-foomatic");
-		# Add PDQ panic buttons to the user's KDE Desktops
-	        printer::pdq_panic_button("add");
-	    }
-	}
-	# Give a SIGHUP to the devfsd daemon to correct the permissions
-	# for the /dev/... files according to the spooler
-	printer::SIGHUP_daemon("devfs");
-    }
-    1;
-}
-
-sub setup_default_spooler {
-    my ($printer, $in, $upNetwork) = @_;
-    $in->set_help('setupDefaultSpooler') if $::isInstall;
-    $printer->{SPOOLER} ||= 'cups';
-    my $oldspooler = $printer->{SPOOLER};
-    my $str_spooler = 
-	$in->ask_from_list_(_("Select Printer Spooler"),
-			    _("Which printing system (spooler) do you want to use?"),
-			    [ printer::spooler() ],
-			    $printer::spooler_inv{$printer->{SPOOLER}},
-			    ) or return;
-    $printer->{SPOOLER} = $printer::spooler{$str_spooler};
-    # Install the spooler if not done yet
-    if (!install_spooler($printer, $in, $upNetwork)) {
-	$printer->{SPOOLER} = $oldspooler;
-	return;
-    }
-    if ($printer->{SPOOLER} ne $oldspooler) {
-	# Remove the local printers from Star Office/OpenOffice.org
-	printer::removelocalprintersfromapplications($printer);
-	# Get the queues of this spooler
-	{
-	    my $w = $in->wait_message('', _("Reading printer data..."));
-	    printer::read_configured_queues($printer);
-	}
-	# Copy queues from former spooler
-	copy_queues_from($printer, $in, $oldspooler);
-	# Re-read the printer database (CUPS has additional drivers, PDQ
-	# has no raw queue)
-	%printer::thedb = ();
-	#my $w = $in->wait_message('', _("Reading printer database..."));
-	#printer::read_printer_db($printer->{SPOOLER});
-    }
-    # Save spooler choice
-    printer::set_default_spooler($printer);
-    return $printer->{SPOOLER};
-}
-
-sub configure_queue {
-    my ($printer, $in) = @_;
-    my $w = $in->wait_message('', _("Configuring printer \"%s\"...",
-				    $printer->{currentqueue}{queue}));
-    $printer->{complete} = 1;
-    printer::configure_queue($printer);
-    $printer->{complete} = 0;
-}
-
-sub install_foomatic {
-    my ($in) = @_;
-    if ((!$::testing) &&
-	(!printer::files_exist((qw(/usr/bin/foomatic-configure
-				       /usr/lib/perl5/site_perl/5.6.1/Foomatic/DB.pm)
-				    )))) {
-	my $w = $in->wait_message('', _("Installing Foomatic..."));
-	$in->do_pkgs->install('foomatic');
-    }
-}
-
-sub wizard_close {
-    my ($in, $mode) = @_;
-    # Leave wizard mode with congratulations screen if $mode = 1
-    $::Wizard_no_previous = 1;
-    $::Wizard_no_cancel = 1;
-    $::Wizard_finished = 1;
-    wizard_congratulations($in) if ($mode == 1);
-    undef $::isWizard;
-    $::WizardWindow->destroy if defined $::WizardWindow;
-    undef $::WizardWindow;
-};
-
-#- Program entry point for configuration of the printing system.
-sub main {
-    my ($printer, $in, $ask_multiple_printer, $upNetwork) = @_;
-
-    # Default printer name, we do not use "lp" so that one can switch the
-    # default printer under LPD without needing to rename another printer.
-    # Under LPD the alias "lp" will be given to the default printer.
-    my $defaultprname = _("Printer");
-
-    # printerdrake does not work without foomatic, and for more convenience
-    # we install some more stuff
-    {
-	my $w = $in->wait_message('', _("Checking installed software..."));
-	if ((!$::testing) &&
-	    (!printer::files_exist((qw(/usr/bin/foomatic-configure
-				       /usr/lib/perl5/site_perl/5.6.1/Foomatic/DB.pm
-				       /usr/bin/escputil
-				       /usr/share/printer-testpages/testprint.ps
-				       ),
-				    (printer::files_exist("/usr/bin/gimp") ?
-				     "/usr/lib/gimp/1.2/plug-ins/print" : ())
-				    )))) {
-	    $in->do_pkgs->install('foomatic','printer-utils','printer-testpages',
-				  if_($in->do_pkgs->is_installed('gimp'), 'gimpprint'));
-	}
-
-	# only experts should be asked for the spooler
-	!$::expert and $printer->{SPOOLER} ||= 'cups';
-
-    }
-
-    # If we have chosen a spooler, install it and mark it as default spooler
-    if (($printer->{SPOOLER}) && ($printer->{SPOOLER} ne '')) {
-	if (!install_spooler($printer, $in, $upNetwork)) {return;}
-        printer::set_default_spooler($printer);
-    }
-
-    # Control variables for the main loop
-    my ($menuchoice, $cursorpos, $queue, $continue, $newqueue, $editqueue, $expertswitch, $menushown) = ('', '::', $defaultprname, 1, 0, 0, 0, 0);
-    # Cursor position in queue modification window
-    my $modify = _("Printer options");
-    while ($continue) {
-	$newqueue = 0;
-	# When the queue list is not shown, cancelling the printer type
-	# dialog should leave the program
-	$continue = 0;
-	# Get the default printer
-	if (defined($printer->{SPOOLER}) && ($printer->{SPOOLER} ne '') &&
-	    ((!defined($printer->{DEFAULT})) || ($printer->{DEFAULT} eq ''))) {
-	    my $w = $in->wait_message('', _("Preparing PrinterDrake..."));
-	    $printer->{DEFAULT} = printer::get_default_printer($printer);
-	    if ($printer->{DEFAULT}) {
-		# If a CUPS system has only remote printers and no default
-		# printer defined, it defines the first printer whose
-		# broadcast signal appeared after the start of the CUPS
-		# daemon, so on every start another printer gets the default
-		# printer. To avoid this, make sure that the default printer
-		# is defined.
-		printer::set_default_printer($printer);
-	    } else {
-		$printer->{DEFAULT} = '';
-	    }
-	}
-
-	# Configure the current printer queues in applications
-	{
-	    my $w = $in->wait_message('', _("Configuring applications..."));
-	    printer::configureapplications($printer);
-	}
-
-	if ($editqueue) {
-	    # The user was either in the printer modification dialog and did
-	    # not close it or he had set up a new queue and said that the test
-	    # page didn't come out correctly, so let the user edit the queue.
-	    $newqueue = 0;
-	    $continue = 1;
-	    $editqueue = 0;
-	} else {
-	    # Reset modification window cursor when one leaves the window
-	    $modify = _("Printer options");
-	    if (!$ask_multiple_printer && 
-		%{$printer->{configured} || {}} == ()) {
-		$in->set_help('doYouWantToPrint') if $::isInstall;
-		$newqueue = 1;
-		$menuchoice = $printer->{want} || 
-		    $in->ask_yesorno(_("Printer"),
-				    _("Would you like to configure printing?"),
-				    0) ? "\@addprinter" : "\@quit";
-		if ($menuchoice ne "\@quit") {
-		    $printer->{SPOOLER} ||= 
-			setup_default_spooler ($printer, $in, $upNetwork) ||
-			    return;
-		}
-	    } else {
-		# Ask for a spooler when none is defined
-		$printer->{SPOOLER} ||=  setup_default_spooler ($printer, $in, $upNetwork) || return;
-		# This entry and the check for this entry have to use
-		# the same translation to work properly
-		my $spoolerentry = _("Printing system: ");
-		# Show a queue list window when there is at least one queue,
-		# when we are in expert mode, or when we are not in the
-		# installation.
-		unless ((!%{$printer->{configured} || {}}) && 
-			(!$::expert) && ($::isInstall)) {
-		    $in->set_help('mainMenu') if $::isInstall;
-		    # Cancelling the printer type dialog should leed to this
-		    # dialog
-		    $continue = 1;
-		    # This is for the "Recommended" installation. When one has
-		    # no printer queue printerdrake starts directly adding
-		    # a printer and in the end it asks whether one wants to
-		    # install another printer. If the user says "Yes", he
-		    # arrives in the main menu of printerdrake. From now
-		    # on the question is not asked any more but the menu
-		    # is shown directly after having done an operation.
-		    $menushown = 1;
-		    # Initialize the cursor position
-		    if (($cursorpos eq "::") && 
-			($printer->{DEFAULT}) &&
-			($printer->{DEFAULT} ne "")) {
-			if ($printer->{configured}{$printer->{DEFAULT}}) {
-			    $cursorpos = 
-				$printer->{configured}{$printer->{DEFAULT}}{'queuedata'}{'menuentry'} . _(" (Default)");
-			} elsif ($printer->{SPOOLER} eq "cups") {
-			    ($cursorpos) = 
-				grep { $_ =~ /!$printer->{DEFAULT}:[^!]*$/ }
-			    printer::get_cups_remote_queues($printer);
-			}
-		    }
-		    # Generate the list of available printers
-		    my @printerlist = 
-			( (sort((map {$printer->{configured}{$_}{'queuedata'}{'menuentry'} 
-				      . ($_ eq $printer->{DEFAULT} ?
-					 _(" (Default)") : (""))}
-				 keys(%{$printer->{configured}
-					|| {}})),
-				($printer->{SPOOLER} eq "cups" ?
-				 printer::get_cups_remote_queues($printer)
-				 : ())))
-			  );
-		    my $noprinters = ($#printerlist < 0);
-		    # Position the cursor where it were before (in case
-		    # a button was pressed).
-		    $menuchoice = $cursorpos;
-		    # Show the main dialog
-		    $in->ask_from_(
-			{title => _("Printerdrake"),
-			 messages =>
-			     ($noprinters ? "" :
-			      (($printer->{SPOOLER} eq "cups") ?
-			       _("The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; to view information about it; or to make a printer on a remote CUPS server available for Star Office/OpenOffice.org.") :
-			       _("The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it."))),
-			 cancel => (""),
-			 ok => (""),
-			},
-			# List the queues
-			[ ($noprinters ? () :
-			   { val => \$menuchoice, format => \&translate,
-			     sort => 0, separator => "!",tree_expanded => 1,
-			     quit_if_double_click => 1,allow_empty_list =>1,
-			     list => \@printerlist }),
-			  { clicked_may_quit =>
-			    sub { 
-				# Save the cursor position
-				$cursorpos = $menuchoice;
-				$menuchoice = "\@addprinter";
-				1; 
-			    },
-			    val => _("Add a new printer") },
-			  ( $printer->{SPOOLER} eq "cups" ?
-			    ({ clicked_may_quit =>
-				   sub { 
-				       # Save the cursor position
-				       $cursorpos = $menuchoice;
-				       $menuchoice = "\@refresh";
-				       1;
-				   },
-			       val => _("Refresh printer list (to display all available remote CUPS printers)") },
-			     { clicked_may_quit =>
-				   sub { 
-				       # Save the cursor position
-				       $cursorpos = $menuchoice;
-				       $menuchoice = "\@cupsconfig";
-				       1;
-				   },
-			       val => ($::expert ? _("CUPS configuration") :
-				       _("Specify CUPS server")) }) : ()),
-			  ( $::expert ?
-			    { clicked_may_quit =>
-				  sub {
-				      # Save the cursor position
-				      $cursorpos = $menuchoice;
-				      $menuchoice = "\@spooler";
-				      1;
-				  },
-				  val => _("Change the printing system") } :
-			    ()),
-			  ( !$::isInstall ?
-			    { clicked_may_quit =>
-				  sub { $menuchoice = "\@usermode"; 1; },
-				  val => ($::expert ? _("Normal Mode") :
-					  _("Expert Mode")) } : ()),
-			  { clicked_may_quit =>
-			    sub { $menuchoice = "\@quit"; 1; },
-			    val => _("Quit") },
-			  ]
-		    );
-		    # Toggle expert mode and standard mode
-		    if ($menuchoice eq "\@usermode") {
-			$::expert = !$::expert;
-			# Read printer database for the new user mode
-			%printer::thedb = ();
-			#my $w = $in->wait_message('', _("Reading printer database..."));
-		        #printer::read_printer_db($printer->{SPOOLER});
-			# Re-read printer queues to switch the tree
-			# structure between expert/normal mode.
-			my $w = $in->wait_message('', _("Reading printer data..."));
-			printer::read_configured_queues($printer);
-			$cursorpos = "::";
-			next;
-		    }
-		} else {
-		    #- as there are no printer already configured, Add one
-		    #- automatically.
-		    $menuchoice = "\@addprinter"; 
-		}
-		# Refresh printer list
-		if ($menuchoice eq "\@refresh") {
-		    next;
-		}
-		# Configure CUPS
-		if ($menuchoice eq "\@cupsconfig") {
-		    config_cups($printer, $in, $upNetwork);
-		    next;
-		}
-	        # Determine a default name for a new printer queue
-		if ($menuchoice eq "\@addprinter") {
-		    $newqueue = 1;
-		    my %queues; 
-		    @queues{map { split '\|', $_ } keys %{$printer->{configured}}} = ();
-		    my $i = ''; while ($i < 150) { last unless exists $queues{"$defaultprname$i"}; ++$i; }
-		    $queue = "$defaultprname$i";
-		}
-		# Function to switch to another spooler
-		if ($menuchoice eq "\@spooler") {
-		    $printer->{SPOOLER} = setup_default_spooler ($printer, $in, $upNetwork) || $printer->{SPOOLER};
-		    next;
-		}
-		# Rip the queue name out of the chosen menu entry
-		if ($menuchoice =~ /!([^\s!:]+):[^!]*$/) {
-		    $queue = $1;
-		    # Save the cursor position
-		    $cursorpos = $menuchoice;
-		}
-	    }
-	    # Save the default spooler
-	    printer::set_default_spooler($printer);
-	    #- Close printerdrake
-	    $menuchoice eq "\@quit" and last;
-	}
-	if ($newqueue) {
-	    $printer->{NEW} = 1;
-	    #- Set default values for a new queue
-	    $printer::printer_type_inv{$printer->{TYPE}} or 
-		$printer->{TYPE} = printer::default_printer_type($printer);
-	    $printer->{currentqueue} = { queue    => $queue,
-					 foomatic => 0,
-					 desc     => "",
-					 loc      => "",
-					 make     => "",
-					 model    => "",
-					 printer  => "",
-					 driver   => "",
-					 connect  => "",
-					 spooler  => $printer->{SPOOLER},
-				       };
-	    #- Set OLD_QUEUE field so that the subroutines for the
-	    #- configuration work correctly.
-	    $printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
-	    #- Do all the configuration steps for a new queue
-	  step_0:
-	    #if ((!$::expert) && (!$::isEmbedded) && (!$::isInstall) &&
-	    if ((!$::isEmbedded) && (!$::isInstall) &&
-		($in->isa('interactive_gtk'))) {
-		$continue = 1;
-		# Enter wizard mode
-		$::Wizard_pix_up = "wiz_printerdrake.png";
-		$::Wizard_title = _("Add a new printer");
-		$::isWizard = 1;
-		# Wizard welcome screen
-		$::Wizard_no_previous = 1;
-		undef $::Wizard_no_cancel;
-		undef $::Wizard_finished;
-		wizard_welcome($printer, $in) or do {
-		    wizard_close($in, 0);
-		    next;
-		};
-		undef $::Wizard_no_previous;
-		eval { 
-		    # eval to catch wizard cancel. The wizard stuff should 
-		    # be in a separate function with steps. see dragw.
-		    # (dams)
-		    $printer->{TYPE} = "LOCAL";
-		  step_1:
-		    !$::expert or choose_printer_type($printer, $in) or
-			goto step_0;
-		  step_2:
-		    setup_printer_connection($printer, $in, $upNetwork) or 
-			do {
-			    goto step_1 if $::expert;
-			    goto step_0;
-			};
-		  step_3:
-		    if (($::expert) or ($printer->{MANUAL}) or
-			($printer->{MORETHANONE})) {
-			choose_printer_name($printer, $in) or
-			    goto step_2;
-		    }
-		    get_db_entry($printer, $in);
-		  step_3_9:
-		    if ((!$::expert) and (!$printer->{MANUAL})) {
-			is_model_correct($printer, $in) or do {
-			    goto step_3 if $printer->{MORETHANONE};
-			    goto step_2;
-			}
-		    }
-		  step_4:
-		    # Remember DB entry for "Previous" button in wizard
-		    my $dbentry = $printer->{DBENTRY};
-		    if (($::expert) or ($printer->{MANUAL}) or
-			($printer->{MANUALMODEL})) { 
-			choose_model($printer, $in) or do {
-			    # Restore DB entry
-			    $printer->{DBENTRY} = $dbentry;
-			    goto step_3_9 if $printer->{MANUALMODEL};
-			    goto step_3;
-			};
-		    }
-		    get_printer_info($printer, $in) or next;
-		  step_5:
-		    setup_options($printer, $in) or
-			goto step_4;
-		    configure_queue($printer, $in);
-		    undef $printer->{MANUAL} if $printer->{MANUAL};
-		    $::Wizard_no_previous = 1;
-		    setasdefault($printer, $in);
-		    $cursorpos = 
-			$printer->{configured}{$printer->{QUEUE}}{'queuedata'}{'menuentry'} .
-			($printer->{QUEUE} eq $printer->{DEFAULT} ?
-			 _(" (Default)") : ());
-		    my $testpages = print_testpages($printer, $in, $printer->{TYPE} !~ /LOCAL/ && $upNetwork);
-		    if ($testpages == 1) {
-			# User was content with test pages
-			# Leave wizard mode with congratulations screen
-			wizard_close($in, 1);
-			$continue = ($::expert || !$::isInstall || $menushown ||
-				     $in->ask_yesorno('',_("Do you want to configure another printer?")));
-		    } elsif ($testpages == 2) {
-			# User was not content with test pages
-			# Leave wizard mode without congratulations
-			# screen
-			wizard_close($in, 0);
-			$editqueue = 1;
-			$queue = $printer->{QUEUE};
-		    }
-		};
-		wizard_close($in, 0) if ($@ =~ /wizcancel/);
-	    } else {
-		$printer->{TYPE} = "LOCAL";
-		!$::expert or choose_printer_type($printer, $in) or next;
-		#- Cancelling the printer connection type window
-		#- should not restart printerdrake in recommended mode,
-		#- it is the first dialog of the sequence there and
-		#- the "Add printer" sequence should be stopped when there
-		#- are no local printers. In expert mode this is the second
-		#- dialog of the sequence.
-		$continue = 1 if ($::expert || !$::isInstall);
-		setup_printer_connection($printer, $in, $upNetwork) or next;
-		#- Cancelling one of the following dialogs should
-		#- restart printerdrake
-		$continue = 1;
-		if (($::expert) or ($printer->{MANUAL}) or
-		    ($printer->{MORETHANONE})) {
-		    choose_printer_name($printer, $in) or next;
-		}
-		get_db_entry($printer, $in);
-		if ((!$::expert) and (!$printer->{MANUAL})) {
-		    is_model_correct($printer, $in) or next;
-		}
-		if (($::expert) or ($printer->{MANUAL}) or
-		    ($printer->{MANUALMODEL})) { 
-		    choose_model($printer, $in) or next;
-		}
-		get_printer_info($printer, $in) or next;
-		setup_options($printer, $in) or next;
-		configure_queue($printer, $in);
-		undef $printer->{MANUAL} if $printer->{MANUAL};
-		setasdefault($printer, $in);
-		$cursorpos = 
-		    $printer->{configured}{$printer->{QUEUE}}{'queuedata'}{'menuentry'} .
-		    ($printer->{QUEUE} eq $printer->{DEFAULT} ?
-		     _(" (Default)") : ());
-		my $testpages = print_testpages($printer, $in, $printer->{TYPE} !~ /LOCAL/ && $upNetwork);
-		if ($testpages == 1) {
-		    # User was content with test pages
-		    $continue = ($::expert || !$::isInstall || $menushown ||
-				 $in->ask_yesorno('',_("Do you want to configure another printer?")));
-		} elsif ($testpages == 2) {
-		    # User was not content with test pages
-		    $editqueue = 1;
-		    $queue = $printer->{QUEUE};
-		}
-	    };
-	    undef $printer->{MANUAL} if $printer->{MANUAL};
-	    undef $printer->{NOAUTODETECT} if $printer->{NOAUTODETECT};
-	} else {
-	    $printer->{NEW} = 0;
-	    # Modify a queue, ask which part should be modified
-	    $in->set_help('modifyPrinterMenu') if $::isInstall;
-	    # Get some info to display
-	    my $infoline;
-	    if ($printer->{configured}{$queue}) {
-		# Here we must regenerate the menu entry, because the
-		# parameters can be changed.
-		printer::make_menuentry($printer,$queue);
-		$printer->{configured}{$queue}{'queuedata'}{menuentry} =~
-		    /!([^!]+)$/;
-		$infoline = $1 .
-		    ($queue eq $printer->{DEFAULT} ? _(" (Default)") : ()) .
-		    ($printer->{configured}{$queue}{'queuedata'}{'desc'} ?
-		     ", Descr.: $printer->{configured}{$queue}{'queuedata'}{'desc'}" : ()) .
-		    ($printer->{configured}{$queue}{'queuedata'}{'loc'} ?
-		     ", Loc.: $printer->{configured}{$queue}{'queuedata'}{'loc'}" : ()) .
-		    ($::expert ?
-		     ", Driver: $printer->{configured}{$queue}{'queuedata'}{'driver'}" : ());
-	    } else {
-		# The parameters of a remote CUPS queue cannot be changed,
-		# so we can simply take the menu entry.
-		$cursorpos =~ /!([^!]+)$/;
-		$infoline = $1;
-	    }
-	    if ($in->ask_from_
-		   ({ title => _("Modify printer configuration"),
-		      messages => 
-			   _("Printer %s
-What do you want to modify on this printer?",
-			     $infoline),
-		     cancel => _("Close"),
-		     ok => _("Do it!")
-		     },
-		    [ { val => \$modify, format => \&translate, 
-			type => 'list',
-			list => [ ($printer->{configured}{$queue} ?
-				   (_("Printer connection type"),
-				    _("Printer name, description, location"),
-				    ($::expert ?
-				     _("Printer manufacturer, model, driver") :
-				     _("Printer manufacturer, model")),
-				    (($printer->{configured}{$queue}{'queuedata'}{'make'} ne
-				      "") &&
-				     (($printer->{configured}{$queue}{'queuedata'}{'model'} ne
-				       _("Unknown model")) &&
-				      ($printer->{configured}{$queue}{'queuedata'}{'model'} ne
-				       _("Raw printer"))) ?
-				     _("Printer options") : ())) : ()),
-				   (($queue ne $printer->{DEFAULT}) ?
-				    _("Set this printer as the default") : ()),
-				   ($printer->{configured}{$queue} ? () :
-				    (_("Add this printer to Star Office/OpenOffice.org"),
-				     _("Remove this printer from Star Office/OpenOffice.org"))),
-				   _("Print test pages"),
-				   _("Know how to use this printer"),
-				   ($printer->{configured}{$queue} ?
-				    _("Remove printer") : ()) ] } ] ) ) {
-		# Stay in the queue edit window until the user clicks "Close"
-		# or deletes the queue
-		$editqueue = 1; 
-		#- Copy the queue data and work on the copy
-		$printer->{currentqueue} = {};
-		my $driver;
-		if ($printer->{configured}{$queue}) {
-		    printer::copy_printer_params($printer->{configured}{$queue}{'queuedata'}, $printer->{currentqueue});
-		    #- Keep in mind the printer driver which was used, so it
-                    #- can be determined whether the driver is only
-		    #- available in expert and so for setting the options
-		    #- for the driver in recommended mode a special
-		    #- treatment has to be applied.
-		    $driver = $printer->{currentqueue}{driver};
-		}
-		#- keep in mind old name of queue (in case of changing)
-		$printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
-		#- Reset some variables
-		$printer->{OLD_CHOICE} = undef;
-		$printer->{DBENTRY} = undef;
-		#- Which printer type did we have before (check beginning of
-		#- URI)
-		my $type;
-		if ($printer->{configured}{$queue}) {
-		    for $type (qw(file lpd socket smb ncp postpipe)) {
-			if ($printer->{currentqueue}{'connect'}
-			    =~ /^$type:/) {
-			    $printer->{TYPE} = 
-				($type eq 'file' ? 'LOCAL' : uc($type));
-			    last;
-			}
-		    }
-		}
-		# Do the chosen task
-		if ($modify eq _("Printer connection type")) {
-		    choose_printer_type($printer, $in) &&
-			setup_printer_connection($printer, $in, $upNetwork) &&
-		            configure_queue($printer, $in);
-		} elsif ($modify eq _("Printer name, description, location")) {
-		    choose_printer_name($printer, $in) &&
-			configure_queue($printer, $in);
-		    # Delete old queue when it was renamed
-		    if (lc($printer->{QUEUE}) ne lc($printer->{OLD_QUEUE})) {
-			my $w = $in->wait_message('', _("Removing old printer \"%s\"...", $printer->{OLD_QUEUE}));
-		        printer::remove_queue($printer, $printer->{OLD_QUEUE});
-			# If the default printer was renamed, correct the
-			# the default printer setting of the spooler
-			if ($queue eq $printer->{DEFAULT}) {
-			    $printer->{DEFAULT} = $printer->{QUEUE};
-			    printer::set_default_printer($printer);
-			}
-			$queue = $printer->{QUEUE};
-		    }
-		} elsif (($modify eq _("Printer manufacturer, model, driver")) ||
-			 ($modify eq _("Printer manufacturer, model"))) {
-		    get_db_entry($printer, $in);
-		    choose_model($printer, $in) &&
-			get_printer_info($printer, $in) &&
-			setup_options($printer, $in) &&
-			configure_queue($printer, $in);
-		} elsif ($modify eq _("Printer options")) {
-		    get_printer_info($printer, $in) &&
-			setup_options($printer, $in) &&
-			configure_queue($printer, $in);
-		} elsif ($modify eq _("Set this printer as the default")) {
-		    $printer->{DEFAULT} = $queue;
-		    printer::set_default_printer($printer);
-		    $in->ask_warn(_("Default printer"),
-				  _("The printer \"%s\" is set as the default printer now.", $queue));
-		} elsif ($modify eq _("Add this printer to Star Office/OpenOffice.org")) {
-		    if (printer::addcupsremotetoapplications
-			($printer, $queue)) {
-			$in->ask_warn(_("Adding printer to Star Office/OpenOffice.org"),
-				      _("The printer \"%s\" was successfully added to Star Office/OpenOffice.org.", $queue));
-		    } else {
-			$in->ask_warn(_("Adding printer to Star Office/OpenOffice.org"),
-				      _("Failed to add the printer \"%s\" to Star Office/OpenOffice.org.", $queue));
-		    }
-		} elsif ($modify eq _("Remove this printer from Star Office/OpenOffice.org")) {
-		    if (printer::removeprinterfromapplications
-			($printer, $queue)) {
-			$in->ask_warn(_("Removing printer from Star Office/OpenOffice.org"),
-				      _("The printer \"%s\" was successfully removed from Star Office/OpenOffice.org.", $queue));
-		    } else {
-			$in->ask_warn(_("Removing printer from Star Office/OpenOffice.org"),
-				      _("Failed to remove the printer \"%s\" from Star Office/OpenOffice.org.", $queue));
-		    }
-		} elsif ($modify eq _("Print test pages")) {
-		    print_testpages($printer, $in, $upNetwork);
-		} elsif ($modify eq _("Know how to use this printer")) {
-		    printer_help($printer, $in);
-		} elsif ($modify eq _("Remove printer")) {
-		    if ($in->ask_yesorno('',
-           _("Do you really want to remove the printer \"%s\"?", $queue), 1)) {
-			{
-			    my $w = $in->wait_message('', _("Removing printer \"%s\"...", $queue));
-			    if (printer::remove_queue($printer, $queue)) { 
-				$editqueue = 0;
-				# Define a new default printer if we have
-				# removed the default one
-				if ($queue eq $printer->{DEFAULT}) {
-				    my @k = sort(keys(%{$printer->{configured}}));
-				    if (@k) {
-					$printer->{DEFAULT} = $k[0];
-				        printer::set_default_printer($printer);
-				    } else {
-					$printer->{DEFAULT} = "";
-				    }
-				}
-				# Let the main menu cursor go to the default
-				# position
-				$cursorpos = "::";
-			    }
-			}
-		    }		
-		}
-		# Make sure that the cursor is still at the same position
-		# in the main menu when one has modified something on the
-		# current printer
-		if (($printer->{QUEUE}) && ($printer->{QUEUE} ne "")) {
-		    if ($printer->{configured}{$printer->{QUEUE}}) {
-			$cursorpos = 
-			    $printer->{configured}{$printer->{QUEUE}}{'queuedata'}{'menuentry'} . 
-			    ($printer->{QUEUE} eq $printer->{DEFAULT} ? 
-			     _(" (Default)") : ());
-		    } else {
-			my $s1 = _(" (Default)");
-			my $s2 = $s1;
-			$s2 =~ s/\(/\\\(/;
-			$s2 =~ s/\)/\\\)/;
-			if (($printer->{QUEUE} eq $printer->{DEFAULT}) &&
-			    ($cursorpos !~ /$s2/)) {
-			    $cursorpos .= $s1;
-			}
-		    }
-		}
-	    } else {
-		$editqueue = 0;
-	    }
-	    $continue = ($editqueue || $::expert || !$::isInstall || 
-			 $menushown ||
-			 $in->ask_yesorno('',_("Do you want to configure another printer?")));
-	}
-
-	# Configure the current printer queue in applications when main menu
-	# will not be shown (During installation in "Recommended" mode)
-	if ($::isInstall && !$::expert && !$menushown && !$continue) {
-	    my $w = $in->wait_message('', _("Configuring applications..."));
-	    printer::configureapplications($printer);
-	}
-
-	# Delete some variables
-	$printer->{OLD_QUEUE} = "";
-	$printer->{QUEUE} = "";
-	$printer->{TYPE} = "";
-	$printer->{str_type} = "";
-	$printer->{currentqueue} = {};
-	$printer->{DBENTRY} = "";
-	$printer->{ARGS} = "";
-	$printer->{complete} = 0;
-	$printer->{OLD_CHOICE} = "";
-    }
-    # Clean up the $printer data structure for auto-install log
-    for my $queue (keys %{$printer->{configured}}) {
-	for my $item (keys %{$printer->{configured}{$queue}}) {
-	    if ($item ne "queuedata") {
-		delete($printer->{configured}{$queue}{$item});
-	    }
-	}
-	if ($printer->{configured}{$queue}{'queuedata'}{'menuentry'}) {
-	    delete($printer->{configured}{$queue}{'queuedata'}{'menuentry'});
-	}
-    }
-    delete($printer->{OLD_QUEUE});
-    delete($printer->{QUEUE});
-    delete($printer->{TYPE});
-    delete($printer->{str_type});
-    delete($printer->{currentqueue});
-    delete($printer->{DBENTRY});
-    delete($printer->{ARGS});
-    delete($printer->{complete});
-    delete($printer->{OLD_CHOICE});
-    delete($printer->{NEW});
-    delete($printer->{MORETHANONE});
-    delete($printer->{MANUALMODEL});
-    #use Data::Dumper;
-    #print "###############################################################################\n", Dumper($printer); 
-
-}
-
diff --git a/perl-install/proxy.pm b/perl-install/proxy.pm
deleted file mode 100644
index 72fd35664..000000000
--- a/perl-install/proxy.pm
+++ /dev/null
@@ -1,110 +0,0 @@
-package proxy;
-
-use diagnostics;
-use strict;
-use run_program;
-use common;
-use log;
-use c;
-
-
-sub main {
-    my ($prefix, $in) = @_;
-    my $proxy_cfg = {};
-    my $config_file = "$prefix/usr/lib/wgetrc";
-
-    # grab current config
-    foreach (cat_($config_file)) {
-      /http_proxy = (http:.*):(\d+)/ and ($proxy_cfg->{http_url}, $proxy_cfg->{http_port}) = ($1, $2);
-      /ftp_proxy = (ftp:.*):(\d+)/ and ($proxy_cfg->{ftp_url}, $proxy_cfg->{ftp_port}) = ($1, $2);
-      /http_user = (.*)/ and ($proxy_cfg->{login}) = $1;
-      if (/http_passwd = (.*)/) {
-        ($proxy_cfg->{passwd}) = $1;
-        ($proxy_cfg->{passwd2}) = $1;
-      }
-    }
-  begin:
-    $::isWizard = 1;
-    $::Wizard_no_previous = 1;
-    $in->ask_okcancel(_("Proxy configuration"),
-                      _("Welcome to the proxy configuration utility.\n\nHere, you'll be able to set up your http and ftp proxies\nwith or without login and password\n"
-                       ), 1);
-
-    # http proxy
-  step_http_proxy:
-    undef $::Wizard_no_previous;
-    $proxy_cfg->{http_url} ||= "http://www.proxy.com/";
-    $in->ask_from(_("Proxy configuration"),
-		  _("Please fill in the http proxy informations\nLeave it blank if you don't want an http proxy"),
-		  [ { label => _("URL"), val => \$proxy_cfg->{http_url} },
-		    { label => _("port"), val => \$proxy_cfg->{http_port} }
-		  ],
-		  complete => sub {
-		      if ($proxy_cfg->{http_url} && $proxy_cfg->{http_url} !~ /^http:/) {
-			  $in->ask_warn('', _("Url should begin with 'http:'"));
-			  return (1,0);
-		      }
-		      if ($proxy_cfg->{http_port} && $proxy_cfg->{http_port} !~ /^\d+$/) {
-			  $in->ask_warn('', _("The port part should be numeric"));
-			  return (1,1);
-		      }
-		      0;
-		  }
-		 ) or goto begin;
-
-    # ftp proxy
-    step_ftp_proxy:
-    $proxy_cfg->{ftp_url} ||= "ftp://ftp.proxy.com/";
-    $in->ask_from(_("Proxy configuration"),
-		  _("Please fill in the ftp proxy informations\nLeave it blank if you don't want an ftp proxy"),
-		  [ { label => _("URL"), val => \$proxy_cfg->{ftp_url} },
-		    { label => _("port"), val => \$proxy_cfg->{ftp_port} }
-		  ],
-		  complete => sub {
-		      if ($proxy_cfg->{ftp_url} && $proxy_cfg->{ftp_url} !~ /^ftp:/) {
-			  $in->ask_warn('', _("Url should begin with 'ftp:'"));
-			  return (1,0);
-		      }
-		      if ($proxy_cfg->{ftp_port} && $proxy_cfg->{ftp_port} !~ /^\d+$/) {
-			  $in->ask_warn('', _("The port part should be numeric"));
-			  return (1,1);
-		      }
-		      0;
-		  }
-		 ) or goto step_http_proxy;
-
-    # proxy login/passwd
-    step_login:
-    $in->ask_from(_("Proxy configuration"),
-		  _("Please enter proxy login and password, if any.\nLeave it blank if you don't want login/passwd"),
-		  [ { label => _("login"), val => \$proxy_cfg->{login} },
-		    {
-		     label => _("password"), val => \$proxy_cfg->{passwd}, hidden => 1 },
-		    {
-		     label => _("re-type password"), val => \$proxy_cfg->{passwd2}, hidden => 1 }
-		  ],
-		  complete => sub {
-		      if ($proxy_cfg->{passwd} ne $proxy_cfg->{passwd2}) {
-			  $in->ask_warn('', _("The passwords don't match. Try again!"));
-			  return(1,1);
-		      }
-		      0;
-		  }
-		 ) or goto step_ftp_proxy;
-    # save config
-    substInFile {
-        s/^(http|ftp)_proxy.*\n//;
-        eof and $_ .= "http_proxy = $proxy_cfg->{http_url}:$proxy_cfg->{http_port}
-ftp_proxy = $proxy_cfg->{ftp_url}:$proxy_cfg->{ftp_port}\n";
-    } $config_file;
-    $proxy_cfg->{login} and substInFile {
-        s/^http_(user|passwd).*\n//;
-        eof and $_ .= "http_user = $proxy_cfg->{login}
-http_passwd = $proxy_cfg->{passwd}\n" } $config_file;
-    log::l("[drakproxy] Installation complete, exiting\n");
-}
-
-#---------------------------------------------
-#                WONDERFULL pad
-#---------------------------------------------
-1;
diff --git a/perl-install/raid.pm b/perl-install/raid.pm
deleted file mode 100644
index 86a27d866..000000000
--- a/perl-install/raid.pm
+++ /dev/null
@@ -1,180 +0,0 @@
-package raid; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use run_program;
-use devices;
-use modules;
-use fs;
-
-sub nb { 
-    my ($nb) = @_;
-    first((ref $nb ? $nb->{device} : $nb) =~ /(\d+)/);
-}
-
-sub new {
-    my ($raids, @parts) = @_;
-    my $nb = @$raids; 
-    $raids->[$nb] = { 'chunk-size' => "64k", type => 0x483, disks => [ @parts ], device => "md$nb", notFormatted => 1, level => 1 };
-    foreach my $part (@parts) {
-	$part->{raid} = $nb;
-	delete $part->{mntpoint};
-    }
-    update($raids->[$nb]);
-    $nb;
-}
-
-sub add {
-    my ($raids, $part, $nb) = @_; $nb = nb($nb);
-    $raids->[$nb]{isMounted} and die _("Can't add a partition to _formatted_ RAID md%d", $nb);
-    inactivate_and_dirty($raids->[$nb]);
-    $part->{notFormatted} = 1; $part->{isFormatted} = 0;
-    $part->{raid} = $nb;
-    delete $part->{mntpoint};
-    push @{$raids->[$nb]{disks}}, $part;
-    update($raids->[$nb]);
-}
-
-sub delete {
-    my ($raids, $nb) = @_;
-    $nb = nb($nb);
-    inactivate_and_dirty($raids->[$nb]);
-    delete $_->{raid} foreach @{$raids->[$nb]{disks}};
-    undef $raids->[$nb];
-}
-
-sub changeNb {
-    my ($raids, $oldnb, $newnb) = @_;
-    if ($oldnb != $newnb) {
-	inactivate_and_dirty($raids->[$_]) foreach $oldnb, $newnb;
-
-	($raids->[$newnb], $raids->[$oldnb]) = ($raids->[$oldnb], undef);
-	$raids->[$newnb]{device} = "md$newnb";
-	$_->{raid} = $newnb foreach @{$raids->[$newnb]{disks}};
-    }
-    $newnb;
-}
-
-sub removeDisk {
-    my ($raids, $part) = @_;
-    my $nb = nb($part->{raid});
-    inactivate_and_dirty($raids->[$nb]);
-    delete $part->{raid};
-    my $disks = $raids->[$nb]{disks};
-    @$disks = grep { $_ != $part } @$disks;
-    if (@$disks) {
-	update($raids->[$nb]);
-    } else {
-	undef $raids->[$nb];
-    }
-}
-
-sub updateSize {
-    my ($part) = @_;
-    local $_ = $part->{level};
-    my @l = map { $_->{size} } @{$part->{disks}};
-
-    $part->{size} = do {
-	if (/0|linear/) { sum @l        }
-	elsif (/1/  )   { min @l        }
-	elsif (/4|5/)   { min(@l) * $#l }
-    };
-}
-
-sub module {
-    my ($part) = @_;
-    my $mod = $part->{level};
-
-    $mod = 5 if $mod eq "4";
-    $mod = "raid$mod" if $mod =~ /^\d+$/;
-    $mod;
-}
-
-
-sub update {
-    updateSize($_) foreach @_;
-}
-
-sub write {
-    my ($raids, $file) = @_;
-    local *F;
-    local $\ = "\n";
-    open F, ">$file" or die _("Can't write file %s", $file);
-
-    foreach (grep {$_} @$raids) {
-	print F <<"EOF";
-raiddev       /dev/$_->{device}
-raid-level    $_->{level}
-chunk-size    $_->{'chunk-size'}
-persistent-superblock 1
-EOF
-	print F "nr-raid-disks ", int @{$_->{disks}};
-	map_index {	    
-	    print F "    device    ", devices::make($_->{device});
-	    print F "    raid-disk $::i";
-	} @{$_->{disks}};
-    }
-}
-
-sub make {
-    my ($raids, $part) = @_;    
-
-    return if is_active($part->{device});
-
-    inactivate_and_dirty($part);
-
-    isRAID($_) and make($raids, $_) foreach @{$part->{disks}};
-    my $dev = devices::make($part->{device});
-    eval { modules::load(module($part)) };
-    &write($raids, "/etc/raidtab");
-    run_program::run("mkraid", "--really-force", $dev) or die
-	$::isStandalone ? _("mkraid failed (maybe raidtools are missing?)") : _("mkraid failed");
-}
-
-sub format_part {
-    my ($raids, $part) = @_;
-    $part->{isFormatted} and return;
-
-    make($raids, $part);
-    fs::real_format_part($part);
-    $_->{isFormatted} = 1 foreach @{$part->{disks}};
-}
-
-sub verify {
-    my ($raids) = @_;
-    $raids or return;
-    foreach (grep {$_} @$raids) {
-	@{$_->{disks}} >= ($_->{level} =~ /4|5/ ? 3 : 2) or die _("Not enough partitions for RAID level %d\n", $_->{level});
-    }
-}
-
-sub prepare_prefixed {
-    my ($raids, $prefix) = @_;
-    $raids or return;
-
-    eval { cp_af("/etc/raidtab", "$prefix/etc/raidtab") };
-    foreach (grep {$_} @$raids) {
-	devices::make("$prefix/dev/$_->{device}") foreach @{$_->{disks}};
-    }
-}
-
-sub inactivate_and_dirty {
-    my ($part) = @_;
-    run_program::run("raidstop", devices::make($part->{device}));
-    $part->{notFormatted} = 1; $part->{isFormatted} = 0;
-}
-
-sub is_active {
-    my ($dev) = @_;
-    grep { /^$dev / } cat_("/proc/mdstat");
-}
-
-sub inactivate_all() { run_program::run("raidstop", devices::make("md$_")) foreach 0..7 }
-
-1;
diff --git a/perl-install/resize_fat/.cvsignore b/perl-install/resize_fat/.cvsignore
deleted file mode 100644
index 3001c7424..000000000
--- a/perl-install/resize_fat/.cvsignore
+++ /dev/null
@@ -1,5 +0,0 @@
-blib
-pm_to_blib
-Makefile_c
-c_rewritten.c
-c_rewritten.bs
diff --git a/perl-install/resize_fat/Makefile b/perl-install/resize_fat/Makefile
deleted file mode 100644
index a82ca8441..000000000
--- a/perl-install/resize_fat/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-.PHONY: clean
-
-c_rewritten: %: %.xs
-	test -e Makefile_c || perl Makefile.PL
-	$(MAKE) -f Makefile_c LD_RUN_PATH=
-	rm -f ../auto/resize_fat ; ln -s ../resize_fat/blib/arch/auto ../auto/resize_fat
-
-clean:
-	test ! -e Makefile_c || $(MAKE) -f Makefile_c clean
-	rm -f *~ *.o
diff --git a/perl-install/resize_fat/Makefile.PL b/perl-install/resize_fat/Makefile.PL
deleted file mode 100644
index 712f4e395..000000000
--- a/perl-install/resize_fat/Makefile.PL
+++ /dev/null
@@ -1,13 +0,0 @@
-use ExtUtils::MakeMaker;
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-
-WriteMakefile(
-    'MAKEFILE'  => 'Makefile_c',
-    'NAME'	=> 'c_rewritten',
-    'OPTIMIZE'  => '-Os',
-    'VERSION_FROM' => 'c_rewritten.pm', # finds $VERSION
-    'LIBS'	=> '',   # e.g., '-lm' 
-    'DEFINE'	=> '',     # e.g., '-DHAVE_SOMETHING' 
-    'INC'	=> '',     # e.g., '-I/usr/include/other' 
-);
diff --git a/perl-install/resize_fat/README b/perl-install/resize_fat/README
deleted file mode 100644
index 12b64dea9..000000000
--- a/perl-install/resize_fat/README
+++ /dev/null
@@ -1,8 +0,0 @@
-TODO:
-
-resize_fat::fat::update($fs) should be called before doing undoable things
-(before the sync in construct_dir_tree)
-
-BUGS:
-no known bugs :)
-if you found one, please mail pixel@mandrakesoft.com !!
diff --git a/perl-install/resize_fat/any.pm b/perl-install/resize_fat/any.pm
deleted file mode 100644
index f811e7159..000000000
--- a/perl-install/resize_fat/any.pm
+++ /dev/null
@@ -1,123 +0,0 @@
-package resize_fat::any; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($FREE $FILE $DIRECTORY $UNMOVEABLE);
-
-use common;
-use resize_fat::fat;
-use resize_fat::directory;
-use resize_fat::dir_entry;
-use resize_fat::c_rewritten;
-
-
-$FREE       = 0;
-$FILE       = 1;
-$DIRECTORY  = 2;
-$UNMOVEABLE = 8;
-
-
-1;
-
-
-#- returns the number of clusters for a given filesystem type
-sub min_cluster_count($) {
-    my ($fs) = @_;
-    (1 << $ {{ FAT16 => 12, FAT32 => 12 }}{$fs->{fs_type}}) - 12;
-}
-sub max_cluster_count($) {
-    my ($fs) = @_;
-    (1 << $ {{ FAT16 => 16, FAT32 => 28 }}{$fs->{fs_type}}) - 11;
-}
-
-
-
-#- patch to get the function last_used that return the last used cluster of a fs.
-sub last_used($) {
-    my ($fs) = @_;
-
-    #- count in negative so absolute value count back to 2.
-    foreach (-($fs->{nb_clusters}+1)..-2) { return -$_ if resize_fat::c_rewritten::flag(-$_) }
-    die "any: empty FAT table of $fs->{nb_clusters} clusters";
-}
-#- patch to get the function last_unmoveable that return the last unmoveable cluster of a fs.
-sub last_unmoveable($) {
-    my ($fs) = @_;
-
-    #- count in negative so absolute value count back to 2.
-    foreach (-($fs->{nb_clusters}+1)..-2) { return -$_ if 0x8 & resize_fat::c_rewritten::flag(-$_) }
-
-    #- Oh at this point there are no unmoveable blocks!
-    2;
-}
-
-#- calculates the minimum size of a partition, in physical sectors
-sub min_size($) {
-    my ($fs) = @_;
-    my $count = $fs->{clusters}{count};
-
-    #- directories are both in `used' and `dirs', so are counted twice
-    #- It's done on purpose since we're moving all directories. So at the worse
-    #- moment, 2 directories are there, but that way nothing wrong can happen :)
-    my $min_cluster_count = max(2 + $count->{used} + $count->{bad} + $count->{dirs}, min_cluster_count($fs));
-    $min_cluster_count = max($min_cluster_count, last_unmoveable($fs));
-
-    my $size = $min_cluster_count * divide($fs->{cluster_size}, $SECTORSIZE) +
-      divide($fs->{cluster_offset}, $SECTORSIZE) +
-    64*1024*1024 / $SECTORSIZE; #- help with such more sectors (ie 64Mb).
-    
-    #- help zindozs again with 512Mb+ at least else partition is ignored.
-    if ($resize_fat::isFAT32) {
-        $size = max($size, 524*1024*1024 / $SECTORSIZE);
-    }
-    $size;
-
-}
-#- calculates the maximum size of a partition, in physical sectors
-sub max_size($) {
-    my ($fs) = @_;
-
-    my $max_cluster_count = min($fs->{nb_fat_entries} - 2, max_cluster_count($fs));
-
-    $max_cluster_count * divide($fs->{cluster_size}, $SECTORSIZE) +
-	divide($fs->{cluster_offset}, $SECTORSIZE);
-}
-#- calculates used size in order to avoid modifying anything.
-sub used_size($) {
-    my ($fs) = @_;
-
-    my $used_cluster_count = max(last_used($fs), min_cluster_count($fs));
-
-    $used_cluster_count * divide($fs->{cluster_size}, $SECTORSIZE) +
-	divide($fs->{cluster_offset}, $SECTORSIZE);
-}
-
-#- fills in fat_flag_map in c_rewritten.
-#- Each FAT entry is flagged as either FREE, FILE or DIRECTORY.
-sub flag_clusters {
-    my ($fs) = @_;
-    my ($cluster, $curr_dir_name, $entry, $type, $nb_dirs);
-
-    my $f = sub {
-	($curr_dir_name, $entry) = @_;
-	$cluster = resize_fat::dir_entry::get_cluster($entry);
-
-	if (resize_fat::dir_entry::is_file($entry)) {
-	    $type = $FILE;
-	    $type |= $UNMOVEABLE if resize_fat::dir_entry::is_unmoveable($entry);
-	} elsif (resize_fat::dir_entry::is_directory($entry)) {
-	    $type = $DIRECTORY;
-	} else { return }
-
-	my $nb = resize_fat::c_rewritten::checkFat($cluster, $type, "$curr_dir_name/$entry->{name}");
-	print "resize_fat:flag_clusters: check fat returned $nb of type $type for $curr_dir_name/$entry->{name}\n";
-	$nb_dirs += $nb if $type == $DIRECTORY;
-	0;
-    };
-
-    #- this must call allocate_fat_flag that zeroes the buffer allocated.
-    resize_fat::c_rewritten::allocate_fat_flag($fs->{nb_clusters} + 2);
-
-    resize_fat::directory::traverse_all($fs, $f);
-    $fs->{clusters}{count}{dirs} = $nb_dirs;
-}
diff --git a/perl-install/resize_fat/boot_sector.pm b/perl-install/resize_fat/boot_sector.pm
deleted file mode 100644
index c87328637..000000000
--- a/perl-install/resize_fat/boot_sector.pm
+++ /dev/null
@@ -1,110 +0,0 @@
-package resize_fat::boot_sector; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::io;
-use resize_fat::any;
-use resize_fat::directory;
-
-
-#- Oops, this will be unresizable on big-endian machine. trapped by signature.
-my $format = "a3 a8 S C S C S S C S S S I I I S S I S S a458 S";
-my @fields = (
-    'boot_jump',		#- boot strap short or near jump
-    'system_id',		#- Name - can be used to special case partition manager volumes
-    'sector_size',		#- bytes per logical sector
-    'cluster_size_in_sectors',	#- sectors/cluster
-    'nb_reserved',		#- reserved sectors
-    'nb_fats',			#- number of FATs
-    'nb_root_dir_entries',	#- number of root directory entries
-    'small_nb_sectors',		#- number of sectors: big_nb_sectors supersedes
-    'media',			#- media code
-    'fat16_fat_length',		#- sectors/FAT for FAT12/16
-    'sectors_per_track',
-    'nb_heads',
-    'nb_hidden',		#- (unused)
-    'big_nb_sectors',		#- number of sectors (if small_nb_sectors == 0)
-
-#- FAT32-only entries
-    'fat32_fat_length',		#- size of FAT in sectors
-    'fat32_flags',		#- bit8: fat mirroring,
-				#- low4: active fat
-    'fat32_version',		#- minor * 256 + major
-    'fat32_root_dir_cluster',
-    'info_offset_in_sectors',
-    'fat32_backup_sector',
-
-#- Common again...
-    'boot_code',		#- Boot code (or message)
-    'boot_sign',		#- 0xAA55
-);
-
-1;
-
-
-#- trimfs_init_boot_sector() - reads in the boot sector - gets important info out
-#- of boot sector, and puts in main structure - performs sanity checks - returns 1
-#- on success, 0 on failureparameters: filesystem an empty structure to fill.
-sub read($) {
-    my ($fs) = @_;
-
-    my $boot = eval { resize_fat::io::read($fs, 0, $SECTORSIZE) }; $@ and die "reading boot sector failed on device $fs->{fs_name}";
-    @{$fs}{@fields} = unpack $format, $boot;
-
-    $fs->{nb_sectors} = $fs->{small_nb_sectors} || $fs->{big_nb_sectors};
-    $fs->{cluster_size} = $fs->{cluster_size_in_sectors} * $fs->{sector_size};
-
-    $fs->{boot_sign} == 0xAA55 or die "Invalid signature for a MS-based filesystem.\n";
-    $fs->{nb_sectors} < 32 and die "Too few sectors for viable file system\n";
-    $fs->{nb_fats} == 2 or cdie "Weird number of FATs: $fs->{nb_fats}, not 2.\n";
-    $fs->{sector_size} == 512 or cdie "Strange sector_size != 512\n";
-
-    if ($fs->{fat16_fat_length}) {
-	#- asserting FAT16, will be verified later on
-	$resize_fat::isFAT32 = 0;
-        $fs->{fs_type} = 'FAT16';
-	$fs->{fs_type_size} = 16;
-	$fs->{fat_length} = $fs->{fat16_fat_length};
-	$resize_fat::bad_cluster_value = 0xfff7; #- 2**16 - 1
-    } else {
-	$resize_fat::isFAT32 = 1;
-        $fs->{fs_type} = 'FAT32';
-        $fs->{fs_type_size} = 32;
-	$fs->{fat_length} = $fs->{fat32_fat_length};
-
-	$fs->{nb_root_dir_entries} = 0;
-	$fs->{info_offset} = $fs->{info_offset_in_sectors} * $fs->{sector_size};
-	$resize_fat::bad_cluster_value = 0x0ffffff7;
-    }
-
-    $fs->{fat_offset} = $fs->{nb_reserved} * $fs->{sector_size};
-    $fs->{fat_size} = $fs->{fat_length} * $fs->{sector_size};
-    $fs->{root_dir_offset} = $fs->{fat_offset} + $fs->{fat_size} * $fs->{nb_fats};
-    $fs->{root_dir_size} = $fs->{nb_root_dir_entries} * resize_fat::directory::entry_size();
-    $fs->{cluster_offset} = $fs->{root_dir_offset} + $fs->{root_dir_size} - 2 * $fs->{cluster_size};
-
-    $fs->{nb_fat_entries} = divide($fs->{fat_size}, $fs->{fs_type_size} / 8);
-
-    #- - 2 because clusters 0 & 1 doesn't exist
-    $fs->{nb_clusters} = divide($fs->{nb_sectors} * $fs->{sector_size} - $fs->{cluster_offset}, $fs->{cluster_size}) - 2;
-
-    $fs->{dir_entries_per_cluster} = divide($fs->{cluster_size}, psizeof($format));
-
-#-    $fs->{nb_clusters} >= resize_fat::any::min_cluster_count($fs) or die "error: not enough sectors for a $fs->{fs_type}\n";
-    $fs->{nb_clusters} <  resize_fat::any::max_cluster_count($fs) or die "error: too many sectors for a $fs->{fs_type}\n";
-}
-
-sub write($) {
-    my ($fs) = @_;
-    my $boot = pack($format, @{$fs}{@fields});
-
-    eval { resize_fat::io::write($fs, 0, $SECTORSIZE, $boot) }; $@ and die "writing the boot sector failed on device $fs->{fs_name}";
-
-    if ($resize_fat::isFAT32) {
-	#- write backup
-	eval { resize_fat::io::write($fs, $fs->{fat32_backup_sector} * $SECTORSIZE, $SECTORSIZE, $boot) };
-	$@ and die "writing the backup boot sector (#$fs->{fat32_backup_sector}) failed on device $fs->{fs_name}";
-    }
-}
diff --git a/perl-install/resize_fat/c_rewritten.pm b/perl-install/resize_fat/c_rewritten.pm
deleted file mode 100644
index d74ecb5d3..000000000
--- a/perl-install/resize_fat/c_rewritten.pm
+++ /dev/null
@@ -1,14 +0,0 @@
-package resize_fat::c_rewritten; # $Id$
-
-use strict;
-use vars qw($VERSION @ISA);
-
-require DynaLoader;
-
-@ISA = qw(DynaLoader);
-$VERSION = '0.01';
-
-bootstrap resize_fat::c_rewritten $VERSION;
-
-1;
-
diff --git a/perl-install/resize_fat/c_rewritten.xs b/perl-install/resize_fat/c_rewritten.xs
deleted file mode 100644
index 92361097d..000000000
--- a/perl-install/resize_fat/c_rewritten.xs
+++ /dev/null
@@ -1,259 +0,0 @@
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-
-/* set by scan_fat, used by next */
-short *fat = NULL;
-char *fat_flag_map = NULL;
-unsigned int *fat_remap = NULL;
-int fat_remap_size;
-int type_size, nb_clusters, bad_cluster_value;
-
-void free_all() {
-#define FREE(p) if (p) free(p), p = NULL;
-  FREE(fat);
-  FREE(fat_flag_map);
-  FREE(fat_remap);
-#undef FREE
-}
-
-unsigned int next(unsigned int cluster) {
-  short *p = fat + type_size * cluster;
-  if (!fat) {
-    free_all();
-    croak("fat::next: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("fat::next: cluster %d outside filesystem", cluster);
-  }
-  return type_size == 1 ? *p : *((unsigned int *) p);
-}
-
-void set_next(unsigned int cluster, unsigned int val) {
-  short *p = fat + type_size * cluster;
-  if (!fat) {
-    free_all();
-    croak("fat::set_next: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("fat::set_next: cluster %d outside filesystem", cluster);
-  }
-  type_size == 1 ? *p : *((unsigned int *) p) = val;
-}
-
-MODULE = resize_fat::c_rewritten PACKAGE = resize_fat::c_rewritten
-
-void 
-read_fat(fd, offset, size, magic)
-  int fd
-  int offset
-  int size
-  unsigned char magic
-  PPCODE:
-{
-  fat = (short *) malloc(size);
-  if (!fat) {
-    free_all();
-    croak("read_fat: not enough memory");
-  }
-  if (lseek(fd, offset, SEEK_SET) != offset ||
-      read(fd, fat, size) != size) {
-    free_all();
-    croak("read_fat: reading FAT failed");
-  }
-  if (magic != *(unsigned char *) fat) {
-    free_all();
-    croak("read_fat: FAT has invalid signature");
-  }
-}
-
-void
-write_fat(fd, size)
-  int fd
-  int size
-  PPCODE:
-{
-  if (write(fd, fat, size) != size) {
-    free_all();
-    croak("write_fat: write failed");
-  }
-}
-
-void
-free_all()
-  PPCODE:
-  free_all();
-
-void
-scan_fat(nb_clusters_, type_size_)
-  int nb_clusters_
-  int type_size_
-  PPCODE:
-{
-  unsigned int v;  
-  int free = 0, bad = 0, used = 0;
-  short *p;
-  
-  type_size = type_size_; nb_clusters = nb_clusters_;
-  bad_cluster_value = type_size == 32 ? 0x0ffffff7 : 0xfff7;
-
-  if (type_size % 16) {
-    free_all();
-    croak("scan_fat: unable to handle FAT%d", type_size);
-  }
-  type_size /= 16;
-
-  for (p = fat + 2 * type_size; p < fat + type_size * (nb_clusters + 2); p += type_size) {
-    v = type_size == 1 ? *p : *((unsigned int *) p);
-
-    if (v == 0) free++;
-    else if (v == bad_cluster_value) bad++;
-  }
-  used = nb_clusters - free - bad;
-  EXTEND(SP, 3);
-  PUSHs(sv_2mortal(newSViv(free)));
-  PUSHs(sv_2mortal(newSViv(bad)));
-  PUSHs(sv_2mortal(newSViv(used)));
-}
-
-unsigned int
-next(unused, cluster)
-  void *unused
-  unsigned int cluster
-  CODE:
-  RETVAL = next(cluster);
-  OUTPUT:
-  RETVAL
-
-void
-set_next(unused, cluster, val)
-  void *unused
-  unsigned int cluster
-  unsigned int val
-  CODE:
-  set_next(cluster, val);
-
-void
-allocate_fat_flag(size)
-  int size
-  CODE:
-  fat_flag_map = calloc(size, 1);
-  if (!fat_flag_map) {
-    free_all();
-    croak("allocate_fat_flag: not enough memory");
-  }
-
-int
-checkFat(cluster, type, name)
-  unsigned int cluster
-  int type
-  char *name
-  CODE:
-  int nb = 0;
-
-  if (!fat_flag_map) {
-    free_all();
-    croak("Bad FAT: trying to use null pointer");
-  }
-  for (; cluster < bad_cluster_value; cluster = next(cluster)) {
-    if (cluster == 0) {
-      free_all();
-      croak("Bad FAT: unterminated chain for %s\n", name);
-    }
-    if (cluster >= nb_clusters + 2) {
-      free_all();
-      croak("Bad FAT: chain outside filesystem for %s\n", name);
-    }
-    if (fat_flag_map[cluster]) {
-      free_all();
-      croak("Bad FAT: cluster %d is cross-linked for %s\n", cluster, name);
-    }
-    fat_flag_map[cluster] = type;
-    nb++;
-  }
-  RETVAL = nb;
-  OUTPUT:
-  RETVAL
-
-unsigned int
-flag(cluster)
-  unsigned int cluster
-  CODE:
-  if (!fat_flag_map) {
-    free_all();
-    croak("Bad FAT: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("Bad FAT: going outside filesystem");
-  }
-  RETVAL = fat_flag_map[cluster];
-  OUTPUT:
-  RETVAL
-
-void
-set_flag(cluster, flag)
-  unsigned int cluster
-  int flag
-  CODE:
-  if (!fat_flag_map) {
-    free_all();
-    croak("Bad FAT: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("Bad FAT: going outside filesystem");
-  }
-  fat_flag_map[cluster] = flag;
-
-void
-allocate_fat_remap(size)
-  int size
-  CODE:
-  fat_remap_size = size;
-  fat_remap = (unsigned int *) calloc(size, sizeof(unsigned int *));
-  if (!fat_remap) {
-    free_all();
-    croak("allocate_fat_remap: not enough memory");
-  }
-
-unsigned int
-fat_remap(cluster)
-  unsigned int cluster
-  CODE:
-  if (!fat_remap) {
-    free_all();
-    croak("fat_remap: trying to use null pointer");
-  }
-  if (cluster >= bad_cluster_value) {
-    RETVAL = cluster; /* special cases */
-  } else {
-    if (cluster >= fat_remap_size) {
-      free_all();
-      croak("fat_remap: cluster %d >= %d in fat_remap", cluster, fat_remap_size);
-    }
-    RETVAL = fat_remap[cluster];
-  }
-  OUTPUT:
-  RETVAL
-
-void
-set_fat_remap(cluster, val)
-  unsigned int cluster
-  unsigned int val
-  CODE:
-  if (!fat_remap) {
-    free_all();
-    croak("set_fat_remap: trying to use null pointer");
-  }
-  if (cluster >= fat_remap_size) {
-    free_all();
-    croak("set_fat_remap: cluster %d >= %d in set_fat_remap", cluster, fat_remap_size);
-  }
-  if (val < bad_cluster_value && val >= fat_remap_size) {
-    free_all();
-    croak("set_fat_remap: remapping cluster %d to cluster %d >= %d in set_fat_remap", cluster, val, fat_remap_size);
-  }
-  fat_remap[cluster] = val;
diff --git a/perl-install/resize_fat/dir_entry.pm b/perl-install/resize_fat/dir_entry.pm
deleted file mode 100644
index b39c72094..000000000
--- a/perl-install/resize_fat/dir_entry.pm
+++ /dev/null
@@ -1,77 +0,0 @@
-package resize_fat::dir_entry; # $Id$
-
-use diagnostics;
-use strict;
-
-
-my $DELETED_FLAG      = 0xe5;
-
-my $READ_ONLY_ATTR    = 0x01;
-my $HIDDEN_ATTR       = 0x02;
-my $SYSTEM_ATTR       = 0x04;
-my $VOLUME_LABEL_ATTR = 0x08;
-my $VFAT_ATTR         = 0x0f;
-my $DIRECTORY_ATTR    = 0x10;
-
-1;
-
-sub get_cluster($) {
-    my ($entry) = @_;
-    $entry->{first_cluster} + ($resize_fat::isFAT32 ? $entry->{first_cluster_high} * (1 << 16) : 0);
-}
-sub set_cluster($$) {
-    my ($entry, $val) = @_;
-    $entry->{first_cluster} = $val & (1 << 16) - 1;
-    $entry->{first_cluster_high} = $val >> 16 if $resize_fat::isFAT32;
-}
-
-sub is_unmoveable($) {
-    my ($entry) = @_;
-    $entry->{attributes} & $HIDDEN_ATTR || $entry->{attributes} & $SYSTEM_ATTR;
-}
-
-sub is_directory($) {
-    my ($entry) = @_;
-    $entry->{attributes} & $DIRECTORY_ATTR && $entry->{name} !~ /^\.\.? / && !is_special_entry($entry);
-}
-
-sub is_volume($) {
-    my ($entry) = @_;
-    !is_special_entry($entry) && $entry->{attributes} & $VOLUME_LABEL_ATTR;
-}
-
-sub is_file($) {
-    my ($entry) = @_;
-    !is_special_entry($entry) && !is_directory($entry) && !is_volume($entry) && $entry->{length};
-}
-
-
-sub is_special_entry($) {
-    my ($entry) = @_;
-    my ($c) = unpack "C", $entry->{name};
-
-    #- skip empty slots, deleted files, and 0xF6?? (taken from kernel)
-    $c == 0 || $c == $DELETED_FLAG || $c == 0xF6 and return 1;
-
-    $entry->{attributes} == $VFAT_ATTR and return 1;
-    0;
-}
-
-
-#- return true if entry has been modified
-#- curr_dir_name is added to contains current directory name, "" for root.
-sub remap {
-    my ($curr_dir_name, $entry) = @_;
-
-    is_special_entry($entry) and return;
-
-    my $cluster = get_cluster($entry);
-    my $new_cluster = resize_fat::c_rewritten::fat_remap($cluster);
-
-    #-print "remapping cluster ", get_cluster($entry), " to $new_cluster";
-
-    $new_cluster == $cluster and return; #- no need to modify
-
-    set_cluster($entry, $new_cluster);
-    1;
-}
diff --git a/perl-install/resize_fat/directory.pm b/perl-install/resize_fat/directory.pm
deleted file mode 100644
index 1f2b1ede6..000000000
--- a/perl-install/resize_fat/directory.pm
+++ /dev/null
@@ -1,79 +0,0 @@
-package resize_fat::directory; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::dir_entry;
-use resize_fat::io;
-
-
-my $format = "a8 a3 C C C S7 I";
-my @fields = (
-    'name',
-    'extension',
-    'attributes',
-    'is_upper_case_name',
-    'creation_time_low',	#- milliseconds
-    'creation_time_high',
-    'creation_date',
-    'access_date',
-    'first_cluster_high',	#- for FAT32
-    'time',
-    'date',
-    'first_cluster',
-    'length',
-);
-my $psizeof_format = psizeof($format);
-
-1;
-
-sub entry_size { $psizeof_format }
-
-#- call `f' for each entry of the directory
-#- if f return true, then modification in the entry are taken back
-sub traverse($$$) {
-    my ($directory, $curr_dir_name, $f) = @_;
-
-    for (my $i = 0;; $i++) {
-	my $raw = \substr($directory, $i * $psizeof_format, $psizeof_format);
-
-	#- empty entry means end of directory
-	$$raw =~ /^\0*$/ and return $directory;
-
-	my $entry; @{$entry}{@fields} = unpack $format, $$raw;
-
-	&$f($curr_dir_name, $entry)
-	    and	$$raw = pack $format, @{$entry}{@fields};
-    }
-    $directory;
-}
-
-sub traverse_all($$) {
-    my ($fs, $f) = @_;
-
-    my $traverse_all; $traverse_all = sub {
-	my ($curr_dir_name, $entry) = @_;
-
-	&$f($curr_dir_name, $entry);
-
-        resize_fat::dir_entry::is_directory($entry)
-	    and traverse(resize_fat::io::read_file($fs, resize_fat::dir_entry::get_cluster($entry)), "$curr_dir_name/$entry->{name}", $traverse_all);
-
-	undef; #- no need to write back (cf traverse)
-    };
-
-    my $directory = $resize_fat::isFAT32 ?
-	resize_fat::io::read_file($fs, $fs->{fat32_root_dir_cluster}) :
-	resize_fat::io::read($fs, $fs->{root_dir_offset}, $fs->{root_dir_size});
-    traverse($directory, "", $traverse_all);
-    undef $traverse_all; #- circular reference is no good for perl's poor GC :(
-}
-
-
-#- function used by construct_dir_tree to translate the `cluster' fields in each
-#- directory entry
-sub remap($$) {
-    my ($fs, $directory) = @_;
-    traverse($directory, "", \&resize_fat::dir_entry::remap);
-}
diff --git a/perl-install/resize_fat/fat.pm b/perl-install/resize_fat/fat.pm
deleted file mode 100644
index 31643f0a3..000000000
--- a/perl-install/resize_fat/fat.pm
+++ /dev/null
@@ -1,138 +0,0 @@
-package resize_fat::fat; # $Id$
-
-use diagnostics;
-use strict;
-
-use resize_fat::any;
-use resize_fat::io;
-use resize_fat::c_rewritten;
-
-1;
-
-sub read($) {
-    my ($fs) = @_;
-
-    resize_fat::c_rewritten::read_fat(fileno $fs->{fd}, $fs->{fat_offset}, $fs->{fat_size}, $fs->{media});
-
-    @{$fs->{clusters}{count}}{qw(free bad used)} =
-      resize_fat::c_rewritten::scan_fat($fs->{nb_clusters}, $fs->{fs_type_size});
-}
-
-sub write($) {
-    my ($fs) = @_;
-
-    sysseek $fs->{fd}, $fs->{fat_offset}, 0 or die "write_fat: seek failed";
-    foreach (1..$fs->{nb_fats}) {
-	resize_fat::c_rewritten::write_fat(fileno $fs->{fd}, $fs->{fat_size});
-    }
-}
-
-
-
-#- allocates where all the clusters will be moved to. Clusters before cut_point
-#- remain in the same position, however cluster that are part of a directory are
-#- moved regardless (this is a mechanism to prevent data loss) (cut_point is the
-#- first cluster that won't occur in the new fs)
-sub allocate_remap {
-    my ($fs, $cut_point) = @_;
-    my ($cluster, $new_cluster);
-    my $remap = sub { resize_fat::c_rewritten::set_fat_remap($cluster, $new_cluster) };
-    my $get_new = sub {
-	$new_cluster = get_free($fs);
-	0 < $new_cluster && $new_cluster < $cut_point or die "no free clusters";
-	set_eof($fs, $new_cluster); #- mark as used
-	#-log::ld("resize_fat: [$cluster,", &next($fs, $cluster), "...]->$new_cluster...");
-    };
-
-    #- this must call allocate_fat_remap that zeroes the buffer allocated.
-    resize_fat::c_rewritten::allocate_fat_remap($fs->{nb_clusters} + 2);
-
-    $fs->{last_free_cluster} = 2;
-    for ($cluster = 2; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	if ($cluster < $cut_point) {
-	    if (resize_fat::c_rewritten::flag($cluster) == $resize_fat::any::DIRECTORY) {
-		&$get_new();
-	    } else {
-		$new_cluster = $cluster;
-	    }
-	    &$remap();
-	} elsif (!is_empty(&next($fs, $cluster))) {
-	    &$get_new();
-	    &$remap();
-	 }
-    }
-}
-
-
-#- updates the fat for the resized filesystem
-sub update {
-    my ($fs) = @_;
-
-    for (my $cluster = 2; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	 if (resize_fat::c_rewritten::flag($cluster)) {
-	     my $old_next = &next($fs, $cluster);
-	     my $new      = resize_fat::c_rewritten::fat_remap($cluster);
-	     my $new_next = resize_fat::c_rewritten::fat_remap($old_next);
-
-	     set_available($fs, $cluster);
-
-	     is_eof($old_next) ?
-		 set_eof($fs, $new) :
-		 set_next ($fs, $new, $new_next);
-	 }
-    }
-}
-
-
-sub endianness16($) { (($_[0] & 0xff) << 8) + ($_[0] >> 8); }
-sub endianness($$) {
-    my ($val, $nb_bits) = @_;
-    my $r = 0;
-    for (; $nb_bits > 0; $nb_bits -= 8) {
-	$r <<= 8;
-	$r += $val & 0xff;
-	$val >>= 8;
-    }
-    $nb_bits < 0 and die "error: endianness only handle numbers divisible by 8";
-    $r;
-}
-
-*next = \&resize_fat::c_rewritten::next;
-*set_next = \&resize_fat::c_rewritten::set_next;
-
-
-
-sub get_free($) {
-    my ($fs) = @_;
-    foreach (my $i = 0; $i < $fs->{nb_clusters}; $i++) {
-        my $cluster = ($i + $fs->{last_free_cluster} - 2) % $fs->{nb_clusters} + 2;
-        is_available(&next($fs, $cluster)) and return $fs->{last_free_cluster} = $cluster;
-    }
-    die "no free clusters";
-}
-
-#-    returns true if <cluster> represents an EOF marker
-sub is_eof($) {
-    my ($cluster) = @_;
-    $cluster >= $resize_fat::bad_cluster_value;
-}
-sub set_eof($$) {
-    my ($fs, $cluster) = @_;
-    set_next ($fs, $cluster, $resize_fat::bad_cluster_value + 1);
-}
-
-#-    returns true if <cluster> is empty.  Note that this includes bad clusters.
-sub is_empty($) {
-    my ($cluster) = @_;
-    $cluster == 0 || $cluster == $resize_fat::bad_cluster_value;
-}
-
-#-    returns true if <cluster> is available.
-sub is_available($) {
-    my ($cluster) = @_;
-    $cluster == 0;
-}
-sub set_available($$) {
-    my ($fs, $cluster) = @_;
-    set_next ($fs, $cluster, 0);
-}
diff --git a/perl-install/resize_fat/info_sector.pm b/perl-install/resize_fat/info_sector.pm
deleted file mode 100644
index 35449cedc..000000000
--- a/perl-install/resize_fat/info_sector.pm
+++ /dev/null
@@ -1,37 +0,0 @@
-package resize_fat::info_sector; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::io;
-
-#- Oops, this will be unresizable on big-endian machine. trapped by signature.
-my $format = "a484 I I I a16";
-my @fields = (
-    'unused',
-    'signature',		#- should be 0x61417272
-    'free_clusters',		#- -1 for unknown
-    'next_cluster',		#- most recently allocated cluster
-    'unused2',
-);
-
-1;
-
-
-sub read($) {
-    my ($fs) = @_;
-    my $info = resize_fat::io::read($fs, $fs->{info_offset}, psizeof($format));
-    @{$fs->{info_sector}}{@fields} = unpack $format, $info;
-    $fs->{info_sector}{signature} == 0x61417272 or die "Invalid information sector signature\n";
-}
-
-sub write($) {
-    my ($fs) = @_;
-    $fs->{info_sector}{free_clusters} = $fs->{clusters}->{count}->{free};
-    $fs->{info_sector}{next_cluster} = 2;
-
-    my $info = pack $format, @{$fs->{info_sector}}{@fields};
-
-    resize_fat::io::write($fs, $fs->{info_offset}, psizeof($format), $info);
-}
diff --git a/perl-install/resize_fat/io.pm b/perl-install/resize_fat/io.pm
deleted file mode 100644
index 7643a0953..000000000
--- a/perl-install/resize_fat/io.pm
+++ /dev/null
@@ -1,71 +0,0 @@
-package resize_fat::io; # $Id$
-
-use diagnostics;
-use strict;
-
-use resize_fat::fat;
-use c;
-
-1;
-
-
-sub read($$$) {
-    my ($fs, $pos, $size) = @_;
-    print "reading $size bytes at $pos\n";
-    my $buf = "\0" x $size;
-    sysseek $fs->{fd}, $pos, 0 or die "seeking to byte #$pos failed on device $fs->{fs_name}";
-    sysread $fs->{fd}, $buf, $size or die "reading at byte #$pos failed on device $fs->{fs_name}";
-    $buf;
-}
-sub write($$$$) {
-    my ($fs, $pos, $size, $buf) = @_;
-    sysseek $fs->{fd}, $pos, 0 or die "seeking to byte #$pos failed on device $fs->{fs_name}";
-    syswrite $fs->{fd}, $buf or die "writing at byte #$pos failed on device $fs->{fs_name}";
-}
-
-sub read_cluster($$) {
-    my ($fs, $cluster) = @_;
-    my $buf;
-    my $pos = $fs->{cluster_offset} / 512 + $cluster * ($fs->{cluster_size} / 512);
-
-    c::lseek_sector(fileno $fs->{fd}, $pos, 0) or die "seeking to sector #$pos failed on device $fs->{fs_name}";
-    sysread $fs->{fd}, $buf, $fs->{cluster_size} or die "reading at sector #$pos failed on device $fs->{fs_name}";
-    $buf;
-}
-sub write_cluster($$$) {
-    my ($fs, $cluster, $buf) = @_;
-    my $pos = $fs->{cluster_offset} / 512 + $cluster * ($fs->{cluster_size} / 512);
-
-    c::lseek_sector(fileno $fs->{fd}, $pos, 0) or die "seeking to sector #$pos failed on device $fs->{fs_name}";
-    syswrite $fs->{fd}, $buf or die "writing at sector #$pos failed on device $fs->{fs_name}";
-}
-
-sub read_file($$) {
-    my ($fs, $cluster) = @_;
-    my $buf = '';
-
-    for (; !resize_fat::fat::is_eof($cluster); $cluster = resize_fat::fat::next ($fs, $cluster)) {
-	$cluster == 0 and die "Bad FAT: unterminated chain\n";
-	$buf .= read_cluster($fs, $cluster);
-    }
-    $buf;
-}
-
-sub check_mounted($) {
-    my ($f) = @_;
-
-    local *F;
-    open F, "/proc/mounts" or die "error opening /proc/mounts\n";
-    foreach (<F>) {
-	/^$f\s/ and die "device is mounted";
-    }
-}
-
-sub open($) {
-    my ($fs) = @_;
-
-    check_mounted($fs->{device});
-
-    sysopen F, $fs->{fs_name}, 2 or sysopen F, $fs->{fs_name}, 0 or die "error opening device $fs->{fs_name} for writing\n";
-    $fs->{fd} = *F;
-}
diff --git a/perl-install/resize_fat/main.pm b/perl-install/resize_fat/main.pm
deleted file mode 100644
index 81dfb6b3f..000000000
--- a/perl-install/resize_fat/main.pm
+++ /dev/null
@@ -1,186 +0,0 @@
-#!/usr/bin/perl
-
-# DiskDrake
-# Copyright (C) 1999 MandrakeSoft (pixel@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# This is mainly a perl rewrite of the work of Andrew Clausen (libresize)
-
-package resize_fat::main; # $Id$
-
-use diagnostics;
-use strict;
-
-use log;
-use common;
-use MDK::Common::System;
-use resize_fat::boot_sector;
-use resize_fat::info_sector;
-use resize_fat::directory;
-use resize_fat::io;
-use resize_fat::fat;
-use resize_fat::any;
-
-
-1;
-
-#- - reads in the boot sector/partition info., and tries to make some sense of it
-sub new($$$) {
-    my ($type, $device, $fs_name) = @_;
-    my $fs = { device => $device, fs_name => $fs_name } ;
-
-    eval {
-	resize_fat::io::open($fs);
-	resize_fat::boot_sector::read($fs);
-	$resize_fat::isFAT32 and eval { resize_fat::info_sector::read($fs) };
-	resize_fat::fat::read($fs);
-	resize_fat::any::flag_clusters($fs);
-    };
-    if ($@) {
-	close $fs->{fd};
-	die;
-    }
-    bless $fs, $type;
-}
-
-sub DESTROY {
-    my ($fs) = @_;
-    close $fs->{fd};
-    resize_fat::c_rewritten::free_all();
-}
-
-#- copy all clusters >= <start_cluster> to a new place on the partition, less
-#- than <start_cluster>. Only copies files, not directories.
-#- (use of buffer needed because the seeks slow like hell the hard drive)
-sub copy_clusters {
-    my ($fs, $cluster) = @_;
-    my @buffer;
-    my $flush = sub {
-	while (@buffer) {
-	    my $cluster = shift @buffer;
-	    resize_fat::io::write_cluster($fs, $cluster, shift @buffer);
-	}
-    };
-    for (; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	resize_fat::c_rewritten::flag($cluster) == $resize_fat::any::FILE or next;
-	push @buffer, 
-	  resize_fat::c_rewritten::fat_remap($cluster), 
-	  resize_fat::io::read_cluster($fs, $cluster);
-	@buffer > 50 and &$flush();
-    }
-    &$flush();
-}
-
-#- Constructs the new directory tree to match the new file locations.
-sub construct_dir_tree {
-    my ($fs) = @_;
-
-    if ($resize_fat::isFAT32) {
-	#- fat32's root must remain in the first 64k clusters
-	#- so don't set it as DIRECTORY, it will be specially handled
-	resize_fat::c_rewritten::set_flag($fs->{fat32_root_dir_cluster}, $resize_fat::any::FREE);
-    }
-
-    for (my $cluster = 2; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	resize_fat::c_rewritten::flag($cluster) == $resize_fat::any::DIRECTORY or next;
-
-      resize_fat::io::write_cluster($fs,
-				    resize_fat::c_rewritten::fat_remap($cluster),
-				    resize_fat::directory::remap($fs, resize_fat::io::read_cluster($fs, $cluster)));
-    }
-
-    MDK::Common::System::sync();
-
-    #- until now, only free clusters have been written. it's a null operation if we stop here.
-    #- it means no corruption :)
-    #
-    #- now we must be as fast as possible!
-
-    #- remapping non movable root directory
-    if ($resize_fat::isFAT32) {
-	my $cluster = $fs->{fat32_root_dir_cluster};
-
-	resize_fat::io::write_cluster($fs,
-		      resize_fat::c_rewritten::fat_remap($cluster),
-		      resize_fat::directory::remap($fs, resize_fat::io::read_cluster($fs, $cluster)));
-    } else {
-	resize_fat::io::write($fs, $fs->{root_dir_offset}, $fs->{root_dir_size},
-			      resize_fat::directory::remap($fs, resize_fat::io::read($fs, $fs->{root_dir_offset}, $fs->{root_dir_size})));
-    }
-}
-
-sub min_size($) { &resize_fat::any::min_size }
-sub max_size($) { &resize_fat::any::max_size }
-sub used_size($) { &resize_fat::any::used_size }
-
-#- resize
-#- - size is in sectors
-#- - checks boundaries before starting
-#- - copies all data beyond new_cluster_count behind the frontier
-sub resize {
-    my ($fs, $size) = @_;
-
-    my ($min, $max) = (min_size($fs), max_size($fs));
-
-    $size += $min if $size =~ /^\+/;
-
-    $size >= $min or die "Minimum filesystem size is $min sectors";
-    $size <= $max or die "Maximum filesystem size is $max sectors";
-
-    log::l("resize_fat: Partition size will be ". ($size * $SECTORSIZE >> 20) ."Mb (well exactly ${size} sectors)");
-
-    my $new_data_size = $size * $SECTORSIZE - $fs->{cluster_offset};
-    my $new_nb_clusters = divide($new_data_size, $fs->{cluster_size});
-    my $used_size = used_size($fs);
-
-    log::l("resize_fat: Break point for moving files is ". ($used_size * $SECTORSIZE >> 20) ." Mb ($used_size sectors)");
-    if ($size < $used_size) {
-	log::l("resize_fat: Allocating new clusters");
-	resize_fat::fat::allocate_remap($fs, $new_nb_clusters);
-
-	log::l("resize_fat: Copying files");
-	copy_clusters($fs, $new_nb_clusters);
-
-	log::l("resize_fat: Copying directories");
-	construct_dir_tree($fs);
-
-	log::l("Writing new FAT...");
-	resize_fat::fat::update($fs);
-	resize_fat::fat::write($fs);
-    } else {
-	log::l("resize_fat: Nothing need to be moved");
-    }
-
-    $fs->{nb_sectors} = $size;
-    $fs->{nb_clusters} = $new_nb_clusters;
-    $fs->{clusters}{count}->{free} =
-      $fs->{nb_clusters} - $fs->{clusters}{count}->{used} - $fs->{clusters}->{count}->{bad} - 2;
-
-    $fs->{system_id} = 'was here!';
-    $fs->{small_nb_sectors} = 0;
-    $fs->{big_nb_sectors} = $size;
-
-    log::l("resize_fat: Writing new boot sector...");
-
-    resize_fat::boot_sector::write($fs);
-
-    $resize_fat::isFAT32 and eval { resize_fat::info_sector::write($fs) }; #- doesn't matter if this fails - its pretty useless!
-
-    MDK::Common::System::sync();
-    close $fs->{fd};
-    log::l("resize_fat: done");
-}
-
diff --git a/perl-install/run_program.pm b/perl-install/run_program.pm
deleted file mode 100644
index 2db504bec..000000000
--- a/perl-install/run_program.pm
+++ /dev/null
@@ -1,68 +0,0 @@
-package run_program; # $Id$
-
-use diagnostics;
-use strict;
-
-use log;
-
-1;
-
-sub run_or_die {
-    my ($name, @args) = @_;
-    run($name, @args) or die "$name failed\n";
-}
-sub rooted_or_die {
-    my ($root, $name, @args) = @_;
-    rooted($root, $name, @args) or die "$name failed\n";
-}
-sub run { rooted('', @_) }
-
-sub rooted {
-    my ($root, $name, @args) = @_;
-    my $str = ref $name ? $name->[0] : $name;
-    log::l("running: $str @args" . ($root ? " with root $root" : ""));
-
-    return 1 if $root && $<;
-
-    $root ? $root .= '/' : ($root = '');
-    install_any::check_prog (ref $name ? $name->[0] : $name) if !$root && $::isInstall;
-
-    if (my $pid = fork) {
-	waitpid $pid, 0;
-	return $? == 0;
-    }
-    {
-	my ($stdout, $stdoutm, $stderr, $stderrm);
-	($stdoutm, $stdout, @args) = @args if $args[0] =~ /^>>?$/;
-	($stderrm, $stderr, @args) = @args if $args[0] =~ /^2>>?$/;
-
-	if ($stderr) {
-	    $stderrm =~ s/2//;
-	    open STDERR, "$stderrm $root$stderr" or die "run_program can't output in $root$stderr (mode `$stderrm')";
-	} elsif ($::isInstall) {
-	    open STDERR, ">> /tmp/ddebug.log" or open STDOUT, ">> /dev/tty7" or die "run_program can't log, give me access to /tmp/ddebug.log";
-	}
-	if ($stdout) {
-	    open STDOUT, "$stdoutm $root$stdout" or die "run_program can't output in $root$stdout (mode `$stdoutm')";
-	} elsif ($::isInstall) {
-	    open STDOUT, ">> /tmp/ddebug.log" or open STDOUT, ">> /dev/tty7" or die "run_program can't log, give me access to /tmp/ddebug.log";
-	}
-
-	$root and chroot $root;
-	chdir "/";
-
-	if (ref $name) {
-	    unless (exec { $name->[0] } $name->[1], @args) {
-		log::l("exec of $name->[0] failed: $!");
-		c::_exit(128);
-	    }
-	} else {
-	    unless (exec $name, @args) {
-		log::l("exec of $name failed: $!");
-		c::_exit(128);
-	    }
-
-	}
-    }
-
-}
diff --git a/perl-install/sbus_probing/main.pm b/perl-install/sbus_probing/main.pm
deleted file mode 100644
index 4aed43459..000000000
--- a/perl-install/sbus_probing/main.pm
+++ /dev/null
@@ -1,138 +0,0 @@
-package sbus_probing::main; # $Id$
-
-use c;
-use log;
-use common;
-use modules;
-
-my %sbus_table_network = (
-			  hme    => [ "Sun Happy Meal Ethernet", "sunhme" ],
-			  le     => [ "Sun Lance Ethernet", "ignore:lance" ],
-			  qe     => [ "Sun Quad Ethernet", "sunqe" ],
-			  mlanai => [ "MyriCOM MyriNET Gigabit Ethernet", "myri_sbus" ],
-			  myri   => [ "MyriCOM MyriNET Gigabit Ethernet", "myri_sbus" ],
-			 );
-my %sbus_table_scsi =    (
-			  soc   => [ "Sun SPARCStorage Array", "fc4:soc:pluto" ],
-			  socal => [ "Sun Enterprise Network Array", "fc4:socal:fcal" ],
-			  esp   => [ "Sun Enhanced SCSI Processor (ESP)", "ignore:esp" ],
-			  fas   => [ "Sun Swift (ESP)", "ignore:esp" ],
-			  ptisp => [ "Performance Technologies ISP", "qlogicpti" ],
-			  isp   => [ "QLogic ISP", "qlogicpti" ],
-			 );
-my %sbus_table_audio =   (
-			  audio      => [ "AMD7930", "amd7930" ],
-			  CS4231     => [ "CS4231 APC DMA (SBUS)", "cs4231" ],
-			  CS4231_PCI => [ "CS4231 EB2 DMA (PCI)", "cs4231" ],
-			 );
-my %sbus_table_video =   (
-			  bwtwo         => [ "Sun|Monochrome (bwtwo)", "Server:SunMono" ],
-			  cgthree       => [ "Sun|Color3 (cgthree)", "Server:Sun" ],
-			  cgeight       => [ "Sun|CG8/RasterOps", "Server:Sun" ],
-			  cgtwelve      => [ "Sun|GS (cgtwelve)", "Server:Sun24" ],
-			  gt            => [ "Sun|Graphics Tower", "Server:Sun24" ],
-			  mgx           => [ "Sun|Quantum 3D MGXplus", "Server:Sun24" ],
-			  mgx_4M        => [ "Sun|Quantum 3D MGXplus with 4M VRAM", "Server:Sun24" ],
-			  cgsix         => [ "Sun|Unknown GX", "Server:Sun" ],
-			  cgsix_dbl     => [ "Sun|Double Width GX", "Server:Sun" ],
-			  cgsix_sgl     => [ "Sun|Single Width GX", "Server:Sun" ],
-			  cgsix_t1M     => [ "Sun|Turbo GX with 1M VSIMM", "Server:Sun" ],
-			  cgsix_tp      => [ "Sun|Turbo GX Plus", "Server:Sun" ],
-			  cgsix_t       => [ "Sun|Turbo GX", "Server:Sun" ],
-			  cgfourteen    => [ "Sun|SX", "Server:Sun24" ],
-			  cgfourteen_4M => [ "Sun|SX with 4M VSIMM", "Server:Sun24" ],
-			  cgfourteen_8M => [ "Sun|SX with 8M VSIMM", "Server:Sun24" ],
-			  leo           => [ "Sun|ZX or Turbo ZX", "Server:Sun24" ],
-			  leo_t         => [ "Sun|Turbo ZX", "Server:Sun24" ],
-			  tcx           => [ "Sun|TCX (S24)", "Server:Sun24" ],
-			  tcx_8b        => [ "Sun|TCX (8bit)", "Server:Sun" ],
-			  afb           => [ "Sun|Elite3D", "Server:Sun24" ],
-			  afb_btx03     => [ "Sun|Elite3D-M6 Horizontal", "Server:Sun24" ],
-			  ffb           => [ "Sun|FFB", "Server:Sun24" ],
-			  ffb_btx08     => [ "Sun|FFB 67Mhz Creator", "Server:Sun24" ],
-			  ffb_btx0b     => [ "Sun|FFB 67Mhz Creator 3D", "Server:Sun24" ],
-			  ffb_btx1b     => [ "Sun|FFB 75Mhz Creator 3D", "Server:Sun24" ],
-			  ffb_btx20     => [ "Sun|FFB2 Vertical Creator", "Server:Sun24" ],
-			  ffb_btx28     => [ "Sun|FFB2 Vertical Creator", "Server:Sun24" ],
-			  ffb_btx23     => [ "Sun|FFB2 Vertical Creator 3D", "Server:Sun24" ],
-			  ffb_btx2b     => [ "Sun|FFB2 Vertical Creator 3D", "Server:Sun24" ],
-			  ffb_btx30     => [ "Sun|FFB2+ Vertical Creator", "Server:Sun24" ],
-			  ffb_btx33     => [ "Sun|FFB2+ Vertical Creator 3D", "Server:Sun24" ],
-			  ffb_btx40     => [ "Sun|FFB2 Horizontal Creator", "Server:Sun24" ],
-			  ffb_btx48     => [ "Sun|FFB2 Horizontal Creator", "Server:Sun24" ],
-			  ffb_btx43     => [ "Sun|FFB2 Horizontal Creator 3D", "Server:Sun24" ],
-			  ffb_btx4b     => [ "Sun|FFB2 Horizontal Creator 3D", "Server:Sun24" ],
-			 );
-
-1;
-
-sub prom_getint($) { unpack "I", c::prom_getproperty($_[0]) }
-
-#- update $@sbus_probed according to SBUS detection.
-sub prom_walk($$$$) {
-    my ($sbus_probed, $node, $sbus, $ebus) = @_;
-    my ($prob_name, $prob_type) = (c::prom_getstring("name"), c::prom_getstring("device_type"));
-    my ($nextnode, $nsbus, $nebus) = (undef, $sbus, $ebus);
-
-    #- probe for network devices.
-    if ($sbus && $prob_type eq 'network') {
-	$prob_name =~ s/[A-Z,]*(.*)/$1/;
-	$sbus_table_network{$prob_name} and push @$sbus_probed, [ "NETWORK", @{$sbus_table_network{$prob_name}} ];
-	#- TODO for Sun Quad Ethernet (qe)
-    }
-
-    #- probe for scsi devices.
-    if ($sbus && ($prob_type eq 'scsi' || $prob_name =~ /^(soc|socal)$/)) {
-	$prob_name =~ s/[A-Z,]*(.*)/$1/;
-	$sbus_table_scsi{$prob_name} and push @$sbus_probed, [ "SCSI", @{$sbus_table_scsi{$prob_name}} ];
-    }
-
-    #- probe for audio devices, there are no type to check here.
-    if ($sbus_table_audio{$prob_name}) {
-	$prob_name =~ /,/ and $prob_name =~ s/[A-Z,]*(.*)/$1/;
-	my $ext = $prob_name eq 'CS4231' && $ebus && "_PCI";
-	$sbus_table_audio{$prob_name . $ext} ?
-	    push @$sbus_probed, [ "AUDIO", @{$sbus_table_audio{$prob_name . $ext}} ] :
-	    push @$sbus_probed, [ "AUDIO", @{$sbus_table_audio{$prob_name}} ];
-    }
-
-    #- probe for video devices.
-    if ($prob_type eq 'display' && ($sbus || $prob_name =~ /^(ffb|afb|cgfourteen)$/)) {
-	$prob_name =~ s/[A-Z,]*(.*)/$1/;
-	my $ext = ($prob_name eq 'mgx' && prom_getint('fb_size') == 0x400000 && '_4M' ||
-		   $prob_name eq 'cgsix' && do {
-		       my ($chiprev, $vmsize) = (prom_getint('chiprev'), prom_getint('vmsize'));
-		       my $result = '';
-		       $chiprev >= 1 && $chiprev <= 4 and $result = '_dbl';
-		       $chiprev >= 5 && $chiprev <= 9 and $result = '_sgl';
-		       $chiprev == 11 && $vmsize == 2 and $result = '_t1M';
-		       $chiprev == 11 && $vmsize == 4 and $result = '_tp';
-		       $chiprev == 11 && !$result and $result = '_t';
-		       $result;
-		   } ||
-		   $prob_name eq 'leo' && c::prom_getstring('model') =~ /501-2503/ && '_t' ||
-		   $prob_name eq 'tcx' && c::prom_getbool('tcx-8-bit') && '_8b' ||
-		   $prob_name eq 'afb' && sprintf "_btx%x", prom_getint('board_type') ||
-		   $prob_name eq 'ffb' && sprintf "_btx%x", prom_getint('board_type'));
-
-	$sbus_table_video{$prob_name . $ext} ?
-	    push @$sbus_probed, [ "VIDEO", @{$sbus_table_video{$prob_name . $ext}} ] :
-	    push @$sbus_probed, [ "VIDEO", @{$sbus_table_video{$prob_name}} ];
-    }
-
-    #- parse prom tree.
-    $prob_name eq 'sbus' || $prob_name eq 'sbi' and $nsbus = 1;
-    $prob_name eq 'ebus' and $nebus = 1;
-    $nextnode = c::prom_getchild($node) and prom_walk($sbus_probed, $nextnode, $nsbus, $nebus);
-    $nextnode = c::prom_getsibling($node) and prom_walk($sbus_probed, $nextnode, $sbus, $ebus);
-}
-
-sub probe {
-    eval { modules::load("openprom") } if arch() =~ /sparc/;
-    my $root_node = c::prom_open();
-    my @l;
-
-    prom_walk(\@l, $root_node, 0, 0);
-    c::prom_close();
-    map { my %l; @l{qw(type description drivers)} = @$_ } @l;
-}
diff --git a/perl-install/scanner.pm b/perl-install/scanner.pm
deleted file mode 100755
index c6eae5b9b..000000000
--- a/perl-install/scanner.pm
+++ /dev/null
@@ -1,227 +0,0 @@
-#!/usr/bin/perl
-
-# scanner.pm $Id$
-# Yves Duret <yduret at mandrakesoft.com>
-# Copyright (C) 2001 MandrakeSoft
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# pbs/TODO:
-# - no scsi support
-# - devfs use dev_is_devfs()
-# - with 2 scanners same manufacturer -> will overwrite previous conf -> only 1 conf !!
-# - lp: see printerdrake
-# - install: prefix --> done
-
-package scanner;
-use lib qw(/usr/lib/libDrakX);
-use standalone;
-use common;
-use detect_devices;
-
-
-my $_sanedir = "$prefix/etc/sane.d";
-my $_scannerDBdir = "$prefix$ENV{SHARE_PATH}/ldetect-lst";
-$scannerDB = readScannerDB("$_scannerDBdir/ScannerDB");
-
-sub confScanner {
-    my ($model, $port) = @_;
-    $port = detect_devices::dev_is_devfs() ? "$prefix/dev/usb/scanner0" : "$prefix/dev/scanner" if (!$port);
-    my $a = $scannerDB->{$model}{server};
-    #print "file:[$a]\t[$model]\t[$port]\n| ", (join "\n| ", @{$scannerDB->{$model}{lines}}),"\n";
-    output("$_sanedir/$a.conf", (join "\n",@{$scannerDB->{$model}{lines}}));
-    substInFile {s/\$DEVICE/$port/} "$_sanedir/$a.conf";
-    add2dll($a);
-}
-
-sub add2dll {
-    return if member($_[0], chomp_(cat_("$_sanedir/dll.conf")));
-    local *F;
-    open F, ">>$_sanedir/dll.conf" or die "can't write SANE config in $_sanedir/dll.conf: $!";
-    print F $_[0];
-    close F;
-}
-
-sub findScannerUsbport {
-    my ($i, $elem, @res) = (0, {});
-    foreach (grep { $_->{driver} =~ /scanner/ } detect_devices::usb_probe()) {
-	#my ($manufacturer, $model) = split '\|', $_->{description};
-	#$_->{description} =~ s/Hewlett[-\s_]Packard/HP/;
-	push @res, { port => "/dev/usb/scanner$i", val => { #CLASS => 'SCANNER',
-							    #MODEL => $model,
-							    #MANUFACTURER => $manufacturer,
-							    DESCRIPTION => $_->{description},
-							    #id => $_->{id},
-							    #vendor => $_->{vendor},
-							  }};
-	++$i;
-    }
-    @res;
-}
-
-
-sub findScannerScsi {
-
-}
-
-sub readScannerDB {
-    my ($file) = @_;
-    my ($card, %cards);
-
-    my $F = common::openFileMaybeCompressed($file);
-
-    my ($lineno, $cmd, $val) = 0;
-    my $fs = {
-        LINE => sub { push @{$card->{lines}}, $val },
-	NAME => sub {
-	    $cards{$card->{type}} = $card if ($card and !$card->{flags}{unsupported});
-	    $card = { type => $val };
-	},
-	SEE => sub {
-	    my $c = $cards{$val} or die "Error in database, invalid reference $val at line $lineno";
-
-	    push @{$card->{lines}}, @{$c->{lines} || []};
-	    add2hash($card->{flags}, $c->{flags});
-	    add2hash($card, $c);
-	},
-	ASK => sub { $card->{ask} = $val; },
-	SERVER => sub { $card->{server} = $val; },
-	DRIVER => sub { $card->{driver} = $val; },
-	UNSUPPORTED => sub { $card->{flags}{unsupported} = 1 },
-	COMMENT => sub {},
-    };
-
-    local $_;
-    while (<$F>) { $lineno++;
-	s/\s+$//;
-	/^#/ and next;
-	/^$/ and next;
-	/^END/ and do { $cards{$card->{type}} = $card if $card; last };
-	($cmd, $val) = /(\S+)\s*(.*)/ or next; #log::l("bad line $lineno ($_)"), next;
-	my $f = $fs->{$cmd};
-	$f ? $f->() : log::l("unknown line $lineno ($_)");
-    }
-    \%cards;
-}
-
-sub updateScannerDBfromUsbtable {
-    substInFile {s/END//} "ScannerDB";
-    local *F;
-    open F, ">>ScannerDB" or die "can't write ScannerDB config in ScannerDB: $!";
-    print F "# generated from usbtable by scannerdrake\n";
-    foreach (cat_("$ENV{SHARE_PATH}/ldetect-lst/usbtable")) {
-	my ($vendor_id, $product_id, $mod, $name) = chomp_(split /\s/,$_,4);
-	next unless ($mod eq "\"scanner\"");
-	$name =~ s/\"(.*)\"$/$1/;
-	if (member($name, keys %$scanner::scannerDB)) {
-	    print "#[$name] already in ScannerDB!\n";
-	    next;
-	}
-	print F "NAME $name\nDRIVER usb\nCOMMENT usb $vendor_id $product_id\nUNSUPPORTED\n\n";
-    }
-    print F "END\n";
-    close F;
-}
-
-sub updateScannerDBfromSane {
-    my ($_sanesrcdir) = @_;
-    substInFile {s/END//} "ScannerDB";
-
-    local *Y;
-    open Y, ">>ScannerDB" or die "can't write ScannerDB config in ScannerDB: $!";
-    print Y "# generated from Sane by scannerdrake\n";
-    # for compat with our usbtable
-    my $sane2DB = { 
-		   "Acer" => "Acer Peripherals Inc.",
-		   "AGFA" => "AGFA-Gevaert NV",
-		   "Agfa" => "AGFA-Gevaert NV",
-		   "Epson" => "Seiko Epson Corp.",
-		   "Fujitsu Computer Products of America" => "Fujitsu",
-		   "HP" => sub {$_[0] =~ s/HP\s/Hewlett-Packard|/; $_[0] =~ s/HP4200/Hewlett-Packard|ScanJet 4200C/; $_[0];},
-		   "Hewlett-Packard" => sub {$_[0] =~ s/HP 3200 C/Hewlett-Packard|ScanJet 3200C/; $_[0];},
-		   "Kodak" => "Kodak Co.",
-		   "Mustek" => "Mustek Systems Inc.",
-		   "NEC" => "NEC Systems",
-		   "Nikon" => "Nikon Corp.",
-		   "Plustek" => "Plustek, Inc.",
-		   "Primax" => "Primax Electronics",
-		   "Siemens" => "Siemens Information and Communication Products",
-		   "Trust" => "Trust Technologies",
-		   "UMAX" => "Umax",
-		   "Vobis/Highscreen" => "Vobis",
-		  };
-    
-    opendir YREP, $_sanesrcdir or die "can't open $_sanesrcdir: $!";
-    @files = grep /.*desc$/, readdir YREP;
-    closedir YREP;
-    foreach $i (@files) {
-	my $F = common::openFileMaybeCompressed("$_sanesrcdir/$i");
-	print Y "\n# from $i";
-	my ($lineno, $cmd, $val) = 0;
-	my ($name, $intf, $comment,$mfg);
-	my $fs = {
-		  backend => sub {$backend = $val;},
-		  mfg => sub {$mfg = $val; $name=undef;},#bug when a new mfg comes. should called $fs->{$name}(); but ??
-		  model => sub {
-		      unless ($name) {$name = $val; next;}
-		      $name = (member($mfg, keys %$sane2DB))
-			? (ref $sane2DB->{$mfg}) ? $sane2DB->{$mfg}($name) : "$sane2DB->{$mfg}|$name" : "$mfg|$name";
-		      if (member($name, keys %$scanner::scannerDB)) {
-			  print "#[$name] already in ScannerDB!\n";
-		      } else {
-			  print Y "\nNAME $name\nSERVER $backend\nDRIVER $intf\n";
-			  print Y "COMMENT $comment\n" if ($comment);
-			  $comment = undef; 
-		      }
-		      $name = $val;
-		  },
-		  interface => sub {$intf = $val;},
-		  comment => sub {$comment = $val;},
-		 };
-	local $_;
-	while (<$F>) { $lineno++;
-		       s/\s+$//;
-		       /^\;/ and next;
-		       ($cmd, $val) = /:(\S+)\s*\"([^\;]*)\"/ or next; #log::l("bad line $lineno ($_)"), next;
-		       my $f = $fs->{$cmd};
-		       $f ? $f->() : log::l("unknown line $lineno ($_)");
-		   }
-	$fs->{model}(); # the last one
-    }
-    print Y "\nEND\n";
-    close Y;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
-
-#-----------------------------------------------
-# $Log$
-# Revision 1.6  2002/03/10 15:26:00  yduret
-# added ASK support for more interactiveness during configuration
-#
-# Revision 1.5  2002/02/18 17:34:31  yduret
-# update
-#
-# Revision 1.4  2002/02/18 16:16:13  yduret
-# scsi parport preliminary support
-# no more show unsupported scanner
-# common output for ScannerDB update from sane *.desc files and from usbtable
-#
-# Revision 1.3  2001/11/12 15:18:02  yduret
-# update, sync with cvs
-#
diff --git a/perl-install/security/msec.pm b/perl-install/security/msec.pm
deleted file mode 100644
index 66800ef11..000000000
--- a/perl-install/security/msec.pm
+++ /dev/null
@@ -1,238 +0,0 @@
-package security::msec;
-
-use common;
-use log;
-
-sub get_user_list {
-   my @user_list = ();
-
-   open(PASSWD, "/etc/passwd");
-   while(<PASSWD>) {
-      my ($login_name, undef, $uid) = split(/:/,$_);
-      if($uid >= 500) { push(@user_list, $login_name); }
-   }
-   @user_list;
-}
-
-sub add_config {
-   my ($prefix, $config_option, @values) = @_;
-   my $tmp_file = "$prefix/etc/security/msec/level.local.tmp";
-   my $result = "";
-
-   $result = $config_option.'(';
-   foreach $value (@values) {
-      $result .= $value.',';
-   }
-   chop $result;
-   $result .= ')';
-
-   open(TMP_CONFIG, '>>'.$tmp_file);
-   print TMP_CONFIG "$result\n";
-   close TMP_CONFIG;
-}
-
-sub commit_changes {
-   my ($prefix) = $_;
-   my $tmp_file = "$prefix/etc/security/msec/level.local.tmp";
-   my $config_file = "$prefix/etc/security/msec/level.local";
-   my %config_data;
-   my $config_option = "";
-
-   open (TMP_CONFIG, $tmp_file);
-
-   if (!(-x $config_file)) {
-      open(CONFIG_FILE, '>'.$config_file);
-      print CONFIG_FILE "from mseclib import *\n\n";
-      while(<TMP_CONFIG>) { print CONFIG_FILE $_; }
-   }
-   else {
-      open(CONFIG_FILE, $config_file);
-      while(<CONFIG_FILE>) {
-         if($_ =~ /\(/) {
-            ($config_option, undef) = split(/\(/, $_);
-            (undef, $config_data{$config_option}) = split(/\(/, $_);
-	 }
-      }
-      close CONFIG_FILE;
-      
-      while(<TMP_CONFIG>) {
-	 ($config_option, undef) = split(/\(/, $_);
-	 (undef, $config_data{$config_option}) = split(/\(/, $_);
-      }
-
-      open(CONFIG_FILE, '>'.$config_file);
-      print CONFIG_FILE "from mseclib import *\n\n";
-      foreach $config_option (keys %config_data) {
-         print CONFIG_FILE $config_option.'('.$config_data{$config_option}.'\n';
-      }   
-   }
-
-   close CONFIG_FILE;
-   close TMP_CONFIG;
-
-   standalone::rm_rf($tmp_file);
-} 
-
-sub get_config {
-    my ($prefix, $security) = @_;
-
-    my (%net_options_defaults) = (
-       accept_bogus_error_responses => [ 0, 0, 0, 0, 1, 1 ],
-       accept_icmp_echo => [ 1, 1, 1, 1, 0, 0 ],
-       enable_ip_spoofing_protection => [ 0, 0, 0, 1, 1, 1 ],
-       enable_log_strange_packets => [ 0, 0, 0, 0, 1, 1 ] );
-
-    my (%user_options_defaults) = (
-       allow_autologin => [ 1, 1, 1, 0, 0, 0 ],
-       allow_issues => [ "ALL", "ALL", "ALL", "LOCAL", "LOCAL", "NONE" ],
-       allow_reboot => [ 1, 1, 1, 1, 0, 0 ],
-       allow_root_login => [ 1, 1, 1, 1, 0, 0 ],
-       allow_user_list => [ 1, 1, 1, 1, 0, 0 ],
-       enable_at_crontab => [ 1, 1, 1, 1, 0, 0 ],
-       enable_pam_wheel_for_su => [ 0, 0, 0, 0, 0, 0 ],
-       enable_password => [ 0, 1, 1, 1, 1, 1 ],
-       enable_sulogin => [ 0, 0, 0, 0, 1, 1 ],
-       password_aging => [ "99999,-1", "99999,-1", "99999,-1", "99999,-1", "60,-1", "30,-1" ],
-       password_length => [ "0,0,0", "0,0,0", "0,0,0", "0,0,0", "0,0,0", "0,0,0" ],
-       set_root_umask => [ "002", "002", "022", "022", "022", "077" ],
-       set_user_umask => [ "002", "002", "022", "022", "077", "077" ],
-       set_shell_history_size => [ "-1", "-1", "-1", "-1", "10", "10" ],
-       set_shell_timeout => [ "0", "0", "0", "0", "3600", "900" ] );
-
-    my (%server_options_defaults) = (
-       allow_x_connections => [ "ALL", "LOCAL", "LOCAL", "LOCAL", "LOCAL", "NONE" ],
-       authorize_services => [ "ALL", "ALL", "ALL", "ALL", "LOCAL", "NONE" ],
-       enable_libsafe => [ 0, 0, 0, 0, 0, 0 ] );
-
-    my (%net_options) = (
-       accept_bogus_error_responses => $net_options_defaults{accept_bogus_error_responses}[$security],
-       accept_icmp_echo => $net_options_defaults{accept_icmp_echo}[$security],
-       enable_ip_spoofing_protection => $net_options_defaults{enable_ip_spoofing_protection}[$security],
-       enable_log_strange_packets => $net_options_defaults{enable_log_strange_packets}[$security]
-    );
-
-    my (%net_options_matrix) = (
-       accept_bogus_error_responses => { label => _("Accept/Refuse bogus IPV4 error messages"),
-                                         val => \$net_options{accept_bogus_error_responses},
-					 type => "bool" },
-       accept_icmp_echo => { label => _("Accept/Refuse ICMP echo"),
-                             val => \$net_options{accept_icmp_echo},
-			     type => "bool" },
-       enable_ip_spoofing_protection => { label => _("Enable/Disable IP spoofing protection. If alert is true, also reports to syslog"),
-                                          val => \$net_options{enable_ip_spoofing_protection},
-					  type=> "bool" },
-       enable_log_strange_packets => { label => _("Enable/Disable the logging of IPv4 strange packets"),
-                                       val => \$net_options{enable_log_strange_packets},
-				       type => "bool" }
-    );
-
-    my (%user_options) = (
-       allow_autologin => $user_options_defaults{allow_autologin}[$security],
-       allow_issues => $user_options_defaults{allow_issues}[$security],
-       allow_reboot => $user_options_defaults{allow_reboot}[$security],
-       allow_root_login => $user_options_defaults{allow_root_login}[$security],
-       allow_user_list => $user_options_defaults{allow_user_list}[$security],
-       enable_at_crontab => $user_options_defaults{enable_at_crontab}[$security],
-       enable_pam_wheel_for_su => $user_options_defaults{enable_pam_wheel_for_su}[$security],
-       enable_password => $user_options_defaults{enable_password}[$security],
-       enable_sulogin => $user_options_defaults{enable_sulogin}[$security],
-       password_aging => $user_options_defaults{password_aging}[$security],
-       password_length => $user_options_defaults{password_length}[$security],
-       set_root_umask => $user_options_defaults{set_root_umask}[$security],
-       set_user_umask => $user_options_defaults{set_user_umask}[$security],
-       set_shell_history_size => $user_options_defaults{set_shell_history_size}[$security],
-       set_shell_timeout => $user_options_defaults{set_shell_timeout}[$security]
-    );
-
-    my (%user_options_matrix) = (
-       allow_autologin => { label => _("Allow/Forbid autologin"),
-                            val => \$user_options{allow_autologin},
-			    type => "bool" },
-       allow_issues => { label => _("Allow/Forbid pre-login message : If ALL, allow remote and local pre-login message (/etc/issue[.net]).\n If LOCAL, allow local pre-login message (/etc/issue). If NONE, disable pre-login message."),
-                         val => \$user_options{allow_issues},
-		         list => ["ALL", "LOCAL", "NONE"] },
-       allow_reboot => { label => _("Allow/Forbid reboot by the console user"),
-                         val => \$user_options{allow_reboot},
-                         type => "bool" },
-       allow_root_login => { label => _("Allow/Forbid direct root login"),
-                             val => \$user_options{allow_root_login},
-                             type => "bool" },
-       allow_user_list => { label => _("Allow/Forbid the list of users on the system in the display managers (kdm and gdm)"),
-                            val => \$user_options{allow_user_list},
-                            type => "bool" },
-       enable_at_crontab => { label => _("Enable/Disable crontab and at for users. Put allowed users in /etc/cron.allow\n and /etc/at.allow (see at(1) and crontab(1))"),
-                              val => \$user_options{enable_at_crontab},
-                              type => "bool" },
-       enable_pam_wheel_for_su => { label => _("Enable su only for members of the wheel group or allow su from any user"),
-                                    val => \$user_options{enable_pam_wheel_for_su},
-                                    type => "bool" },
-       enable_password => { label => _("Use password to authenticate users"),
-                            val => \$user_options{enable_password},
-                            type => "bool" },
-       enable_sulogin => { label => _("Enable/Disable sulogin in single user level (see sulogin(8))"),
-                           val => \$user_options{enable_sulogin},
-                           type => "bool" },
-       password_aging => { label => _("Set password aging to max days, Set delay before inactive\n (99999 to disable password aging, -1 to disable de-activation"),
-                           val => \$user_options{password_aging} },
-       password_length => { label => _("Set the password minimum length, the minimum number of digits and the minimum number of capitalized letters"),
-                            val => \$user_options{password_length} },
-       set_root_umask => { label => _("Set the root umask"),
-                           val => \$user_options{set_root_umask} },
-       set_user_umask => { label => _("Set the user umask"),
-                           val => \$user_options{set_user_umask} },
-       set_shell_history_size => { label => _("Set shell commands history size (-1 for unlimited)"),
-                                   val => \$user_options{set_shell_history_size} },
-       set_shell_timeout => { label => _("Set the shell timeout in seconds (0 for unlimited)"),
-                              val => \$user_options{set_shell_timeout} }
-    );
-
-    my (%server_options) = (
-       allow_x_connections => $server_options_defaults{allow_x_connections}[$security],
-       authorize_services => $server_options_defaults{authorize_services}[$security],
-       enable_libsafe => $server_options_defaults{enable_libsafe}[$security]
-    );
-
-    my (%server_options_matrix) = (
-       allow_x_connections => { label => ("Allow/Forbid X connections : If ALL, all connections allowed. If LOCAL, local connections allowed.\n If NONE, only console connections allowed"),
-                                val => \$server_options{allow_x_connections},
-                                list => [ "ALL", "LOCAL", "NONE" ] },
-       authorize_services => { label => _("Allow/Forbid services : If ALL, authorize all services. If LOCAL, authorize only local services.\n If NONE, disable all services. (see hosts.deny(5)). To authorize a service, see hosts.allow(5)."),
-                               val => \$server_options{authorize_services},
-                               list => [ "ALL", "LOCAL", "NONE" ] },
-       enable_libsafe => { label => _("Enable/Disable libsafe if it's installed on the system."),
-                           val => \$server_options{enable_libsafe},
-                           type => "bool" },
-   );
-
-   my $config_file = "$prefix/etc/security/msec/level.local";
-   my $values = "";
-   my $config_option = "";
-
-   open CONFIGFILE, $config_file;
-   while(<CONFIGFILE>) {
-       if($_ =~ /\(/) {
-           ($config_option, undef) = split(/\(/, $_);
-	   (undef, $values) = split(/\(/, $_);
-	   chop $values;
-
-	   if ($config_option ne "set_security_conf") {
-	       if ($net_options_matrix{$config_option}{description} eq "") {
-                   (undef, $net_options_matrix{$config_option}{value}) = $values;
-	       } elsif ($user_options_matrix{$config_option}{description} eq "") {
-                   (undef, $user_options_matrix{$config_option}{value}) = $values;
-	       } elsif ($server_options_matrix{$config_option}{description} eq "") {
-                   (undef, $server_options_matrix{$config_option}{value}) = $values;
-	       }
-	   }
-	   else {
-	       # TODO : Add code to handle set_security_conf
-	   }
-       }
-   }
-
-   close CONFIGFILE;
-
-   return (\%net_options_matrix, \%user_options_matrix, \%server_options_matrix);
-}
-
-1;
diff --git a/perl-install/services.pm b/perl-install/services.pm
deleted file mode 100644
index 0ddaaf79a..000000000
--- a/perl-install/services.pm
+++ /dev/null
@@ -1,288 +0,0 @@
-package services; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use run_program;
-
-sub description {
-    my %services = (
-alsa => __("Launch the ALSA (Advanced Linux Sound Architecture) sound system"),
-anacron => __("Anacron a periodic command scheduler."),
-apmd => __("apmd is used for monitoring batery status and logging it via syslog.
-It can also be used for shutting down the machine when the battery is low."),
-atd => __("Runs commands scheduled by the at command at the time specified when
-at was run, and runs batch commands when the load average is low enough."),
-crond => __("cron is a standard UNIX program that runs user-specified programs
-at periodic scheduled times. vixie cron adds a number of features to the basic
-UNIX cron, including better security and more powerful configuration options."),
-gpm => __("GPM adds mouse support to text-based Linux applications such the
-Midnight Commander. It also allows mouse-based console cut-and-paste operations,
-and includes support for pop-up menus on the console."),
-harddrake => __("HardDrake runs a hardware probe, and optionally configures
-new/changed hardware."),
-httpd => __("Apache is a World Wide Web server. It is used to serve HTML files and CGI."),
-inet => __("The internet superserver daemon (commonly called inetd) starts a
-variety of other internet services as needed. It is responsible for starting
-many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables
-all of the services it is responsible for."),
-ipchains => __("Launch packet filtering for Linux kernel 2.2 series, to set
-up a firewall to protect your machine from network attacks."),
-keytable => __("This package loads the selected keyboard map as set in
-/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.
-You should leave this enabled for most machines."),
-kheader => __("Automatic regeneration of kernel header in /boot for
-/usr/include/linux/{autoconf,version}.h"),
-kudzu => __("Automatic detection and configuration of hardware at boot."),
-linuxconf => __("Linuxconf will sometimes arrange to perform various tasks
-at boot-time to maintain the system configuration."),
-lpd => __("lpd is the print daemon required for lpr to work properly. It is
-basically a server that arbitrates print jobs to printer(s)."),
-lvs => __("Linux Virtual Server, used to build a high-performance and highly
-available server."),
-named => __("named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses."),
-netfs => __("Mounts and unmounts all Network File System (NFS), SMB (Lan
-Manager/Windows), and NCP (NetWare) mount points."),
-network => __("Activates/Deactivates all network interfaces configured to start
-at boot time."),
-nfs => __("NFS is a popular protocol for file sharing across TCP/IP networks.
-This service provides NFS server functionality, which is configured via the
-/etc/exports file."),
-nfslock => __("NFS is a popular protocol for file sharing across TCP/IP
-networks. This service provides NFS file locking functionality."),
-numlock => __("Automatically switch on numlock key locker under console
-and XFree at boot."),
-oki4daemon => __("Support the OKI 4w and compatible winprinters."),
-pcmcia => __("PCMCIA support is usually to support things like ethernet and
-modems in laptops.  It won't get started unless configured so it is safe to have
-it installed on machines that don't need it."),
-portmap => __("The portmapper manages RPC connections, which are used by
-protocols such as NFS and NIS. The portmap server must be running on machines
-which act as servers for protocols which make use of the RPC mechanism."),
-postfix => __("Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another."),
-random => __("Saves and restores system entropy pool for higher quality random
-number generation."),
-rawdevices => __("Assign raw devices to block devices (such as hard drive
-partitions), for the use of applications such as Oracle"),
-routed => __("The routed daemon allows for automatic IP router table updated via
-the RIP protocol. While RIP is widely used on small networks, more complex
-routing protocols are needed for complex networks."),
-rstatd => __("The rstat protocol allows users on a network to retrieve
-performance metrics for any machine on that network."),
-rusersd => __("The rusers protocol allows users on a network to identify who is
-logged in on other responding machines."),
-rwhod => __("The rwho protocol lets remote users get a list of all of the users
-logged into a machine running the rwho daemon (similiar to finger)."),
-sound => __("Launch the sound system on your machine"),
-syslog => __("Syslog is the facility by which many daemons use to log messages
-to various system log files.  It is a good idea to always run syslog."),
-usb => __("Load the drivers for your usb devices."),
-xfs => __("Starts the X Font Server (this is mandatory for XFree to run)."),
-    );
-    my ($name, $prefix) = @_;
-    my $s = $services{$name};
-    if ($s) {
-	$s = translate($s);
-    } else {
-	$s = -e "$prefix/etc/rc.d/init.d/$name" && cat_("$prefix/etc/rc.d/init.d/$name");
-	$s ||= -e "$prefix/etc/init.d/$name" && cat_("$prefix/etc/init.d/$name");
-	$s ||= -e "$prefix/etc/xinetd.d/$name" && cat_("$prefix/etc/xinetd.d/$name");
-	$s =~ s/\\\s*\n#\s*//mg;
-	if ($s =~ /^# description:\s+\S/sm) {
-	    ($s) = $s =~ /^# description:\s+(.*?)^(?:[^#]|# {0,2}\S)/sm;
-	} else {
-	    ($s) = $s =~ /^#\s*(.*?)^[^#]/sm;
-	}
-	$s =~ s/#\s*//mg;
-    }
-    $s =~ s/\n/ /gm; $s =~ s/\s+$//;
-    $s;
-}
-
-sub ask_install_simple {
-    my ($in, $prefix) = @_;
-    my ($l, $on_services) = services($prefix);
-    $in->ask_many_from_list("drakxservices",
-			    _("Choose which services should be automatically started at boot time"),
-			    {
-			     list => $l,
-			     help => sub { description($_[0], $prefix) },
-			     values => $on_services,
-			     sort => 1,
-			    });
-}
-
-sub ask_install {
-    my ($in, $prefix) = @_;
-    my %root_services = (
-			 _("Printing") => [ qw(cups cupslpd lpr lpd oki4daemon hpoj cups-lpd ) ],
-			 _("Internet") => [ qw(httpd boa tux roxen ftp pftp tftp proftpd wu-ftpd pure-ftpdipsec proftpd-xinetd
-                                               ipchains iptables ipvsadm isdn4linux ibod jabber jabber-icq adsl squid
-                                               portsentry prelude nessusd junkbuster radvd cddbp ippl iptoip jail.init ) ],
-			 _("File sharing") => [ qw(nfs nfslock smb nettalk netfs mcserv autofs amd
-                                                   venus.init auth2.init codasrv.init update.init swat ) ],
-			 _("System") => [ qw(usb usbd pcmcia irda xinetd inetd kudzu harddrake apmd sound network xfs
-                                             alsa functions halt kheader killall mandrake_everytime mandrake_firstime
-                                             random rawdevices single keytable syslog crond medusa-init portmap acon
-                                             anacron atd gpm psacct wine acpid numlock jserver sensors mosix bpowerd bpowerfail
-                                             fcron powertweak.init ups syslog-ng cvs apcupsd) ],
-			 _("Remote Administration") => [ qw(sshd telnetd telnet rsh rlogin rexec webmin cfd heartbeat ldirectord
-                                                            iplog mon vncserver netsaint olympusd drakxtools_http ) ],
-#			 _("Network Client") => [ qw(ypbind nscd arpwatch fetchmail dnrd_rc diald rsync ) ],
-#			 _("Network Server") => [ qw(named bootparamd ntpd xntpd chronyd postfix sendmail
-#                                                     imap imaps ipop2 ipop3 pop3s routed yppasswdd ypserv ldap dhcpd dhcrelay
-#                                                     hylafax innd identd rstatd rusersd rwalld rwhod gated
-#                                                     kadmin kprop krb524 krb5kdc krb5server hldsld bayonne sockd dhsd gnu-pop3d
-#                                                     gdips pptpd.conf vrrpd crossfire bnetd pvmd ircd sympa finger ntalk talk) ],
-			 _("Database Server") => [ qw(mysql postgresql) ],
-			);
-    my %services_root;
-    foreach my $root (keys %root_services) {
-	$services_root{$_} = $root foreach @{$root_services{$root}};
-    }
-    my ($l, $on_services) = services($prefix);
-    my %services;
-    $services{$_} = 0 foreach @{$l || []};
-    $services{$_} = 1 foreach @{$on_services || []};
-
-    $in->ask_browse_tree_info('drakxservices', _("Choose which services should be automatically started at boot time"),
-			      {
-			       node_state => sub { $services{$_[0]} ? 'selected' : 'unselected' },
-			       build_tree => sub {
-				   my ($add_node, $flat) = @_;
-				   $add_node->($_, !$flat && ($services_root{$_} || _("Other")))
-				     foreach sort keys %services;
-			       },
-			       grep_unselected => sub { grep { !$services{$_} } @_ },
-			       toggle_nodes => sub {
-				   my ($set_state, @nodes) = @_;
-				   my $new_state = !$services{$nodes[0]};
-				   foreach (@nodes) {
-				       $set_state->($_, $new_state ? 'selected' : 'unselected');
-				       $services{$_} = $new_state;
-				   }
-			       },
-			       get_status => sub {
-				   _("Services: %d activated for %d registered", 
-				     scalar(grep { $_ } values %services),
-				     scalar(values %services));
-			       },
-			       get_info => sub { formatLines(description($_[0], $prefix)) },
-			      }) or return ($l, $on_services); #- no change on cancel.
-    ($l, [ grep { $services{$_} } @$l ]);
-}
-
-sub ask_standalone_gtk {
-    my ($in, $prefix) = @_;
-    my ($l, $on_services) = services($prefix);
-
-    require my_gtk;
-    my_gtk->import(qw(:helpers :wrappers));
-
-    my $W = my_gtk->new(_("Services"));
-    my ($x, $y, $w_popup);
-    my $nopop = sub { $w_popup and $w_popup->destroy };
-    my $display = sub { $nopop->(); $_[0] and gtkmove(gtkshow(gtkadd($w_popup=new Gtk::Window (-popup),
-        				       gtksignal_connect(gtkadd(new Gtk::EventBox(),
-        				           gtkadd(gtkset_shadow_type(new Gtk::Frame, 'etched_out'),
-        					   gtkset_justify(new Gtk::Label($_[0]), 0))),
-        					   button_press_event => sub { $nopop->() }
-		      ))), $x, $y) };
-    my $update_service = sub {
-		my $started = -e "/var/lock/subsys/$_[0]";
-                my $action = $started ? "stop" : "start";
-                $_[1]->set($started ? _("running") : _("stopped"));
-                $started, $action;
-    };
-    my $strip = sub {
-                my $infos_old = $_[0];
-                my $infos;
-		while ($infos_old =~ s/(.{40})//) {
-                    $1 =~ /(.*) ([^ ]*)/;
-		    $infos .= "$1\n$2";
-                }
-                $infos .= $infos_old;
-    };
-    my $b = new Gtk::EventBox();
-    $b->set_events(["pointer_motion_mask"]);
-    gtkadd($W->{window}, gtkadd($b, gtkpack_($W->create_box_with_title(_("Services and deamons")),
-	1, gtkset_usize(createScrolledWindow(create_packtable({ col_spacings => 10, row_spacings => 3 },
-	    map {
-                my $service = $_;
-        	my $infos = $strip->(description($_, $prefix));
-                $infos ||= _("No additional information\nabout this service, sorry.");
-		my $l = new Gtk::Label();
-                my ($started, $action) = $update_service->($service, gtkset_justify($l, 0));
-		[ gtkpack__(new Gtk::HBox(0,0), $_),
-		  gtkpack__(new Gtk::HBox(0,0), $l),
-		  gtkpack__(new Gtk::HBox(0,0), gtksignal_connect(new Gtk::Button(_("Info")), clicked => sub { $display->($infos) })),
-                  gtkpack__(new Gtk::HBox(0,0), gtkset_active(gtksignal_connect(
-                          new Gtk::CheckButton(_("On boot")),
-                          clicked => sub { if ($_[0]->active) {
-                                               "@$on_services" =~ /$service/ or push(@$on_services,$service)
-                                           } else {
-                                               @$on_services = grep(!/$service/, @$on_services)
-                                        }}), "@$on_services" =~ /$service/ )),
-		  map { my $a = $_;
-                      gtkpack__(new Gtk::HBox(0,0), gtksignal_connect(new Gtk::Button(_($a)),
-                          clicked => sub { my $c = "service $service " . (lc($a) eq "start" ? "restart" : lc($a)) . " 2>&1"; local $_=`$c`; s/\033\[[^mG]*[mG]//g;
-                                           ($started, $action) = $update_service->($service, $l);
-                                           $display->($_);
-                                         }
-                      )) } (__("Start"), __("Stop"))
-		]
-	    }
-            @$l)), 500, 400),
-            0, gtkpack(gtkset_border_width(new Gtk::HBox(0,0),5), $W->create_okcancel)
-            ))
-	  );
-    $b->signal_connect( motion_notify_event => sub { my ($w, $e) = @_;
-                                                               my ($ox, $oy) = $w->window->get_deskrelative_origin;
-                                                               $x = $e->{'x'}+$ox; $y = $e->{'y'}+$oy; });
-    $b->signal_connect( button_press_event => sub { $nopop->()});
-    $::isEmbedded and Gtk->main_iteration while Gtk->events_pending;
-    $::isEmbedded and kill (12, $::CCPID);
-    $W->main or return;
-    ($l, $on_services);
-}
-
-sub ask {    
-    my ($in, $prefix) = @_;
-    !$::isInstall && $in->isa('interactive_gtk') ? &ask_standalone_gtk : &ask_install;
-}
-
-sub doit {
-    my ($in, $on_services, $prefix) = @_;
-    my ($l, $was_on_services) = services($prefix);
-
-    foreach (@$l) {
-	my $before = member($_, @$was_on_services);
-	my $after = member($_, @$on_services);
-	if ($before != $after) {
-	    my $script = "/etc/rc.d/init.d/$_";
-	    run_program::rooted($prefix, "chkconfig", $after ? "--add" : "--del", $_);
-	    if ($after && cat_("$prefix$script") =~ /^#\s+chkconfig:\s+-/m) {
-		run_program::rooted($prefix, "chkconfig", "--level", "35", $_, "on");
-	    }
-	    if (!$after && $::isStandalone) {
-		run_program::rooted($prefix, $script, "stop");
-	    }
-	}
-    }
-}
-
-#- returns: 
-#--- the listref of installed services
-#--- the listref of "on" services
-sub services {
-    my ($prefix) = @_;
-    my $cmd = $prefix && !$::testing ? "chroot $prefix" : "";
-    my @l = map { [ /([^\s:]+)/, /\bon\b/ ] } grep { !/:$/ } sort `LANGUAGE=C $cmd /sbin/chkconfig --list`;
-    [ map { $_->[0] } @l ], [ map { $_->[0] } grep { $_->[1] } @l ];
-}
-
-1;
diff --git a/perl-install/share/.cvsignore b/perl-install/share/.cvsignore
deleted file mode 100644
index 4173dc671..000000000
--- a/perl-install/share/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-locales.tar.bz2
-locales-*-drakx.tar.bz2
diff --git a/perl-install/share/Makefile b/perl-install/share/Makefile
deleted file mode 100644
index 00e5afcc3..000000000
--- a/perl-install/share/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-all: locales.tar.bz2
-
-# /usr/lib/libc.a to depend on the current glibc
-locales.tar.bz2: locales-skeleton.tar.bz2 gen_locales.sh /usr/lib/libc.a
-	./gen_locales.sh
diff --git a/perl-install/share/advertising/Makefile b/perl-install/share/advertising/Makefile
deleted file mode 100644
index 30005e186..000000000
--- a/perl-install/share/advertising/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-include ../../Makefile.config
-
-install:
-	rm -rf $(ROOTDEST)/Mandrake/share/advertising
-	install -d $(ROOTDEST)/Mandrake/share/advertising
-	install -m755 *.pl $(ROOTDEST)/Mandrake/share/advertising
-	install -m644 *.png $(ROOTDEST)/Mandrake/share/advertising
-	install -m644 list $(ROOTDEST)/Mandrake/share/advertising
diff --git a/perl-install/share/advertising/list b/perl-install/share/advertising/list
deleted file mode 100644
index fb5689909..000000000
--- a/perl-install/share/advertising/list
+++ /dev/null
@@ -1,14 +0,0 @@
-00-thanks.png
-01-gnu.png
-02-internet.png
-03-graphic.png
-04-develop.png
-05-contcenter.png
-06-user.png
-07-server.png
-08-games.png
-09-MDKcampus.png
-10-MDKexpert.png
-11-consul.png
-12-MDKstore.png
-13-Nvert.png
diff --git a/perl-install/share/aliases b/perl-install/share/aliases
deleted file mode 100644
index d3807605a..000000000
--- a/perl-install/share/aliases
+++ /dev/null
@@ -1,7 +0,0 @@
-raidstop raidstart
-gunzip gzip
-install2 perl-install/install2
-commands perl-install/commands
-runinstall2 install2
-fsck.ext2 e2fsck
-rmmod insmod_
diff --git a/perl-install/share/compssList b/perl-install/share/compssList
deleted file mode 100644
index 36b0f4a44..000000000
--- a/perl-install/share/compssList
+++ /dev/null
@@ -1,1665 +0,0 @@
-	                               normal server developer
-
-AVLTree-devel                                  0     0     0
-AfterStep                                     22     0    53
-AfterStep-APPS                                22     0    35  
-Apache-ASP                                   -99     0   -99
-ApacheJServ                                  -99     0   -99
-Apple-StyleWriter-printer-driver__lpstyl       0     0     0
-Aurora					      81    -1    -1
-BasiliskII                                    35     0    10
-BasiliskII-sheepnet                           33     0     8
-BitchX                                        43     0    15
-C++2LaTeX                                      0     0    30
-Canon-CaPSL-printer-driver__cjet               0     0     0
-ClanLib                                       32     0    32
-ClanLib-devel				       0     0    25
-ClanLib-docs				       0     0    25
-ClanLib-gl				       0     0     0
-ClanLib-magick				       0     0     0
-ClanLib-mikmod				       0     0     0
-ClanLib-png                                    0     0     0
-Device3Dfx                                    -1    -1    -1
-DrakConf                                      84    84    84
-drakprofile                                   50     0    50
-draksync                                      50     0    50
-DrakeLogo                                     20     0     0
-ElectricFence                                 10     0    66
-Epplets                                       57     0    53
-Eterm                                         57     0    53
-Eterm-devel                                    0     0     0
-FaxMail                                       30     0     0
-FileRunner                                    45     0    25
-FreeWnn                                      -20   -20   -20
-FreeWnn-devel                                -70   -60   -40
-GConf                                          0     0     0
-GConf-devel                                    0     0    40
-GXedit                                        40     0    55
-Glide_V2                                      -1    -1    -1
-Glide_V2-devel                                -1    -1    -1
-Glide_V3                                      -1    -1    -1
-Glide_V3-DRI                                  -1    -1    -1
-Glide_V3-DRI-devel                            -1    -1    -1
-Glide_V3-devel                                -1    -1    -1
-Glide_V5                                      -1    -1    -1
-Glide_V5-devel                                -1    -1    -1
-HTML-Embperl                                   0    40    40
-Hermes                                        32     0    42
-Hermes-devel                                   0     0    35
-ImageMagick                                   56     5    60
-ImageMagick-devel                             10     0    60
-ImageMagick-lib                                0     0     0
-MAKEDEV                                       91    91    91
-MandrakeUpdate                                82     0    80
-Mesa                                          30     0    70
-Mesa-common                                   30     0    70
-Mesa-common-devel                              0     0    70
-Mesa-demos                                    10     0    15
-MySQL                                          2    55    15
-MySQL-bench                                    2    50    10
-MySQL-client                                   2    52    11
-MySQL-devel                                    0     0    15
-MySQL-shared                                   2    50    10
-ORBit                                          0     0    55
-ORBit-devel                                   10     0    55
-SDL                                           50     0    25
-SDL-devel                                      0     0    25
-SDL_image                                      0     0    25
-SDL_image-devel                                0     0    25
-SDL_mixer				       0     0    25
-SDL_mixer-devel				       0     0    25
-SDL_net					       0     0    25
-SDL_net-devel				       0     0    25
-SDL_ttf					       0     0    25
-SDL_ttf-devel                                  0     0    25
-SVGATextMode                                   0     0     0
-SmallEiffel                                    0     0    30
-SysVinit                                      15    52    45
-TiMidity++                                    51     0    54
-WMRack                                        40     0    32
-WindowMaker                                   40     0    57
-WindowMaker-devel                              0     0    30
-WsLib-devel                                    0     0     0
-X11R6-contrib                                 55     0    47
-XFree86                                       91     0    81
-XFree86-100dpi-fonts                          56     0    30
-XFree86-3DLabs                               -30   -30   -30
-XFree86-75dpi-fonts                           91     0    81
-XFree86-8514                                 -30   -30   -30
-XFree86-AGX                                  -30   -30   -30
-XFree86-FBDev                                -30   -30   -30
-XFree86-I128                                 -30   -30   -30
-XFree86-ISO8859-2                            -20   -30   -20
-XFree86-ISO8859-2-100dpi-fonts               -20   -30   -20
-XFree86-ISO8859-2-75dpi-fonts                -20   -30   -20
-XFree86-ISO8859-2-Type1-fonts                -20   -30   -20
-XFree86-ISO8859-9                            -20   -30   -20
-XFree86-ISO8859-9-100dpi-fonts               -20   -30   -20
-XFree86-ISO8859-9-75dpi-fonts                -20   -30   -20
-XFree86-Mach32                               -30   -30   -30
-XFree86-Mach64                               -30   -30   -30
-XFree86-Mach8                                -30   -30   -30
-XFree86-Mono                                 -30   -30   -30
-XFree86-P9000                                -30   -30   -30
-XFree86-S3                                   -30   -30   -30
-XFree86-S3V                                  -30   -30   -30
-XFree86-SVGA                                 -30   -30   -30
-XFree86-VGA16                                -30   -30   -30
-XFree86-W32                                  -30   -30   -30
-XFree86-Xnest                                  0     0    55
-XFree86-Xvfb                                   0     0    15
-XFree86-cyrillic-fonts                       -20   -30   -20
-XFree86-devel                                 12     0    55
-XFree86-doc                                  -30   -30   -30
-XFree86-glide-module                          -2    -2    -2
-XFree86-libs                                  10     0     0
-XFree86-server                               -30   -30   -30
-XFree86-server-common                        -30   -30   -30
-XFree86-static-libs                            0     0    20
-XFree86-xfs                                    0     0     0
-XaoS                                          40     0    25
-XaoS-aalib                                     0     0     0
-XaoS-svgalib                                   0     0     0
-Xaw3d                                         20     0    70
-Xaw3d-devel                                   10     0    60
-Zope                                           0    15    30
-Zope-components                     	       0    15    30
-Zope-core				       0    15    30
-Zope-pcgi				       0    15    30
-Zope-services				       0    15    30
-Zope-zpublisher				       0    15    30
-Zope-zserver				       0    15    30
-Zope-ztemplates                                0    15    30
-aalib                                         25     0    15
-aalib-devel                                    0     0    25    
-abisuite                                      59     0    45
-acon                                         -10   -10   -10
-acpid                                          0     0     0
-adjtimex                                      22    35    87
-adns                                          30    30    30 
-adns-devel                                     0     0    30
-aktion                                        66     0    15
-alsa                                           0     0     0
-alsa-lib                                       0     0     0
-alsa-lib-devel                                 0     0    20
-alsa-source				       0     0     0
-alsa-utils				       0     0     0
-alsaplayer                                     0     0     0
-am-utils                                       0    25    19
-ami                                          -20   -20   -20
-ami-gnome                                    -20   -20   -20
-anacron                                       85    70    85
-anonftp                                        0    86    13
-apache                                       -99    80   -99
-apache-common                                -99     0   -99
-apache-devel                                 -99     0   -99
-apache-manual                                -99    40   -99
-apache-mod_perl                              -99    85   -99
-apache-mod_perl-devel                        -99     0   -99
-apache-suexec                                -99    75   -99
-apcupsd                                       -1    -1    -1
-apmd                                          -1    -1    -1
-apmd-devel                                    -1    -1    -1
-app-defaults-be                              -30   -30   -30
-app-defaults-cs                              -30   -30   -30
-app-defaults-ga                              -30   -30   -30
-app-defaults-ru                              -30   -30   -30
-app-defaults-th                              -30   -30   -30
-app-defaults-uk                              -30   -30   -30
-arpwatch                                       0    50     0
-ash                                           10    10    10
-aspell                                        49    15    22
-aspell-ca                                    -30   -30   -30
-aspell-cs                                    -30   -30   -30
-aspell-da                                    -30   -30   -30
-aspell-de                                    -30   -30   -30
-aspell-de_CH                                 -30   -30   -30
-aspell-devel                                   0     0    10
-aspell-en                                    -30   -30   -30
-aspell-en_CA                                 -30   -30   -30
-aspell-en_GB                                 -30   -30   -30
-aspell-eo                                    -30   -30   -30
-aspell-es                                    -30   -30   -30
-aspell-fr                                    -30   -30   -30
-aspell-it                                    -30   -30   -30
-aspell-nl                                    -30   -30   -30
-aspell-no                                    -30   -30   -30
-aspell-pl                                    -30   -30   -30
-aspell-sv                                    -30   -30   -30
-at                                            42    96    94
-aterm                                         17     0    13
-audiofile                                     25     0    26
-audiofile-devel                               10     0    26
-aumix                                         79     0    79
-auth_ldap                                      5    75    20
-autoconf                                      15     0    84
-autofs                                        48    45    50
-autoirpm                                     -60   -60   -60
-autologin                                     82     0    82
-automake                                      15     0    84
-awesfx                                        20     0    13
-basesystem                                     0     0     0
-bash                                           0     0     0
-bash-doc                                      35    50    71
-bash1                                         15     5    13
-bc                                            40    25    25
-bdflush                                        0     0     0
-bind                                           0    75     0
-bind-devel                                     0     0     0
-bind-utils                                    25    35    70
-binutils                                      47     0    87
-bison                                         10     0    80
-blackbox                                      30     0    45
-blt                                           10     0    75
-bluefish                                      60     0    60
-boa                                          -99   -99   -99
-bonnie                                         5    45    25
-bonobo                                        20     0    20
-bonobo-devel                                   0     0    35
-bootparamd                                    20    78     0
-bug-buddy                                      0     0    20
-byacc                                         16     0    80
-bzflag                                        -1    -1    -1
-bzip2                                         41    85    75
-caching-nameserver                             0    70     0
-cbb                                           55     0    13
-cdecl                                         10     0    70
-cdialog                                        3     0    20
-cdp                                           40     0    27
-cdparanoia                                    45     0    45
-cdparanoia-devel                               0     0    30
-cdrecord                                      45     0    45
-cdrecord-cdda2wav                             44     0    45
-cdrecord-devel                                10     0     0
-cervisia                                       0     0     0
-cfengine                                       0    30     0
-chkconfig                                      0    65    10
-chkfontpath                                    0     0    50
-chromium                                      -1    -1    -1
-clanbomber                                    65     0    25 
-cleanfeed                                     24    65    21
-clisp                                          0     0    15
-compat-glibc                                   0     0    40
-compat-libs                                    0     0     0
-comsat                                         0    30     2
-console-tools                                 97    97    97
-console-tools-devel                            0     0     0
-control-center                                69     0    10
-control-center-devel                           0     0     0
-control-panel                                  2     0     2
-cooledit                                       0     0    30
-corewars                                       0    15     0
-cpio                                          90    89    90
-cproto                                        15     0    61
-cracklib                                      10    85    35
-cracklib-devel                                 0     0    15
-cracklib-dicts                                10    82    35
-crontabs                                      95    95    95
-csmash                                        -1    -1    -1
-ctags                                         10     0    80
-cttex                                        -30   -30   -30
-cups                                         -99   -99   -99
-cups-devel                                     0     0    20
-cups-drivers                                 -99   -99   -99
-cvs                                           18    60    72
-cvsweb                                         0     0    30
-cxhextris                                     50     0    36
-detect                                        25    25    75 
-detect-devel                                   0     0    60
-detect-lst                                    25    25    75
-dev                                           99    99    99
-dev86                                          0     0    40
-dev86-devel                                    0     0    40
-devfsd                                         0     0     0
-dhcp                                         -99    80   -99
-dhcp-client                                    0    79     5
-dhcp-relay                                     0    10     0
-dhcpcd                                         0     0     0
-dhcpxd                                         0     0     0
-dia                                           30     0    30
-dialog                                        10     0    71
-diffstat                                      12    50    87
-diffutils                                     42    55    87
-dip                                           40    45    13
-docbook-dtd31-sgml                            30     0    45
-docbook-style-dsssl                            5    15    15
-docbook-style-dsssl-doc                        4    14    14
-dosemu                                        45     0    49
-dosemu-freedos                                45     0    49
-dosfstools                                    40    15    22
-doxygen                                        0     0    40
-dpsftp                                        45     0     0
-dpsftplib                                     45     0     0
-dpsftplib-devel                               45     0    15
-drakfloppy                                    84     0    84
-drakfont                                      84     0    84
-drakxtools                                    86    80    87
-dump                                          10    75    87
-e2fsprogs                                     98    98    98    
-e2fsprogs-devel                                0     0    25
-eMusic                                        65     0    50
-ed                                            45    10     5
-ee                                            58     0    54
-efax                                          25    78    30
-egcs                                           5     0    50
-egcs-c++                                       5     0    50
-egcs-cpp                                       5     0    50
-egcs-g77                                       5     0    50
-egcs-objc                                      5     0    50
-egcs-objc-devel                                4     0    20
-eggdrop                                       25     0    25
-eject                                         92    33    91
-elm                                           22     5    13
-emacs                                         49    45     0
-emacs-X11                                     51     0    69
-emacs-el                                       0     0    15
-emacs-leim                                    20     0    50
-emacs-nox                                     20     0    14
-emacs-pcomplete                               20     0    30
-emacs-tramp                                   20    20    30
-enlightenment                                 41     0    55
-enscript                                      20    25    71
-eog                                           30     0    20
-eperl                                          0     0    10
-eshell                                        20     0    30
-esound                                         0     0     0
-esound-devel                                  12     0     4
-etcskel                                       98    98    98
-ethemes                                       40     0    35
-exmh                                          40     0    36
-expect                                        23     0    71
-ext2ed                                         5    52    42
-ext2resize                                     5    52    42
-faces                                         20    75    15
-faces-devel                                   10     0     0
-faces-xface                                   20     0    15
-faq                                           63    49    53
-fbset                                         22     0     0
-fdutils                                       10     0     0
-fetchmail                                     45    99    31
-fetchmail-daemon                              20    30    20
-fetchmailconf                                 45     0    40
-file                                          92    92    94
-filesystem                                    99    99    99
-fileutils                                     99    99    99
-findutils                                     97    97    97
-finger                                        40    35    27
-finger-server                                  0    30     0
-flex                                          13     0    72
-fltk                                           0     0     0
-fltk-devel                                     0     0    15
-fmirror                                       45    35    40
-fnlib                                         10     0     7
-fnlib-devel                                   10     0     0
-fonts-ttf-armenian                           -10     0   -10
-fonts-ttf-big5                               -10     0   -10
-fonts-ttf-decoratives                         72     0    68
-fonts-ttf-gb2312                             -10     0   -10
-fonts-ttf-japanese                           -10     0   -10
-fonts-ttf-korean                             -10     0   -10
-fonts-ttf-west_european                       77     0    74
-fonts-type1-baltic                           -15   -15   -15
-fortune-mod                                   10     0    10
-freeciv                                       54     0    53
-freetype                                      10     0     4
-freetype-devel                                10     0     0
-fribidi                                        0     0     0
-fribidi-devel                                  0     0     0
-ftp                                           90    92    90
-fvwm                                          12     0    15
-fvwm2                                         17     0    17
-fvwm2-icons                                   17     0    17
-fwhois                                        25    45    36
-g-print                                       20     0    20
-g-wrap                                         0     0    40
-g-wrap-devel                                   0     0    20
-gaddr                                         45     0    40
-gaim                                          35     0    30
-gated                                          0    80     0
-gatos                                         55     0    49
-gawk                                          10    55    87
-gawk-doc                                      10    35    50
-gcc                                           50    40    90
-gcc-c++                                       15     0    74
-gcc-chill                                     20     0    65
-gcc-colorgcc                                   0     0     0
-gcc-cpp                                       47     0    72
-gcc-fr                                         0     0     0
-gcc-g77                                       15     0    27
-gcc-java                                      16     0    65
-gcc-libgcj                                    15     0    30
-gcc-objc                                      16     0    35
-gcombust                                      40     0     0
-gd                                            12     0    71
-gd-devel                                      10     0    71
-gd-utils                                      45     0    64
-gdb                                           12     0    94
-gdbm                                          12     0    72
-gdbm-devel                                    10     0    72
-gdk-pixbuf                                    68     0    70
-gdk-pixbuf-devel                               0     0    40
-gdm                                           67     0    55
-gedit                                         68     0    62
-gedit-devel                                    0     0     0
-genromfs                                      10     0     9
-gentoo                                        30     0     0
-gettext                                       10    15    71
-gettext-devel                                  0     0    35
-getty_ps                                      99    99    99
-gfcc                                          15     0    31
-gftp                                          67     0    62
-ggv                                           25     0     0
-ghc                                            0     0    35
-ghc-prof                                       0     0     2
-ghostscript                                   40    70    75
-ghostscript-utils                             30    50    55
-ghostscript-fonts                             22    55    75
-ghostscript-module-SVGALIB                    10     0    63
-ghostscript-module-X                          40    60    65
-gif2png                                       10     0    20
-giftrans                                      42     0    71
-gimp                                          69     0    67
-gimp-data-extras                              55     0    58
-gimp-devel                                    10     0    40
-gimp-libgimp                                  10     0    50
-gimp-perl                                     30     0    30
-git                                           69    35    54
-gkrellm                                       15    30    15
-gkrellm-devel                                  0     0    20
-glade                                         17     0    57
-glademm                                        0     0    40
-glib                                           1     0     0
-glib-devel                                    10     0    87
-glibc                                          1    99    96
-glibc-devel                                   25     0    76
-glibc-profile                                  1     0    54
-gltron                                        -1    -1    -1
-gmc                                           68     0    59
-gmp                                           17     0    71
-gmp-devel                                     10     0    71
-gnomba                                        24     0    24
-gnome-applets                                 68     0    55
-gnome-audio                                   60     0    55
-gnome-audio-extra                             55     0    50
-gnome-chess                                   60     0    55
-gnome-core                                    68     0    55
-gnome-core-devel                              10     0    55
-gnome-games                                   60     0    59
-gnome-games-devel                             10     0     0
-gnome-guile                                    0     0    50
-gnome-guile-devel                             10     0    50
-gnome-iconedit                                60     0    55
-gnome-libs                                    68     0    55
-gnome-libs-devel                              10     0    55
-gnome-linuxconf                               74     0    74
-gnome-media                                   60     0    58
-gnome-network                                 60     0    58
-gnome-objc                                     0     0    40
-gnome-objc-devel                              10     0    40
-gnome-pilot                                   55     0    45
-gnome-pilot-conduits                          45     0    35
-gnome-pilot-devel                              0    15     0
-gnome-pim                                     61     0    70
-gnome-pim-conduits                            51     0    60
-gnome-pim-devel                               10     0    70
-gnome-print                                   62     0    55
-gnome-print-devel                             10     0    55
-gnome-tiles                                   60     0    55
-gnome-toaster                                 65     0    61
-gnome-users-guide                             66     0    60
-gnome-utils                                   66     0    50
-gnome-vfs                                      0     0     0
-gnome-vfs-devel                                0     0    30
-gnomeicu                                      61     0    58
-gnomemm                                        0     0    40
-gnomemm-devel                                  0     0    30
-gnorpm                                        74     0    71
-gnozip                                        50     0    60
-gnucash                                       35     0    15
-gnucash-devel                                  0     0    12
-gnuchess                                      40     0    31
-gnumeric                                      67     0    58
-gnuplot                                       65     0    53
-gnus                                          20     0    14
-gob                                            0     0    20
-gperf                                         12     0    72
-gphoto                                        60     0    58
-gpm                                            0    65    87
-gpm-devel                                     10     0    55
-gprolog                                        5     5    45
-gps                                           30    15    30
-gqcam                                          0     0     0
-gqview                                        55     0    49
-grep                                           0    92    94
-grip                                          60     0    35
-groff                                          0     0    62
-groff-for-man                                  0     0     0
-groff-gxditview                               22     0    19
-groff-perl                                     0     0     0
-grpmi                                          0     0     0
-grub                                          99    99    99
-grub-doc                                       0     0    25
-gsl                                           10     0     0
-gsl-devel                                      0     0     0
-gsu                                           65     0    53
-gtk+                                           0     0    70
-gtk+-devel                                    10     0    70
-gtk+licq                                      45     0    30
-gtk+mdk                                        0     0    15
-gtk+mdk-devel                                  0     0    15
-gtk-engines                                    0     0    70
-gtk-themes                                    50     0    20
-gtkdialogs                                     0     0     0
-gtkeyboard                                    20     0     0
-gtkglarea                                     10     0    15
-gtkglarea-devel                                0     0    15
-gtkgo                                         15     0     5
-gtkgraph                                      65     0    35
-gtkhtml                                        0     0     0
-gtkhtml-devel                                  0     0     0
-gtkmm                                         20     0    55
-gtkmm-devel                                   20     0    55
-gtktalog        			      52     0    25
-gtkzip                                        60     0    58
-gtop                                          60     0    58
-gtulpas                                       10     0    10
-guile                                         11     0    75
-guile-devel                                   10     0    75
-gurpmi                                        82     0    86
-gv                                            55     0    49
-gzip                                          98    98    98
-hackkernel                                     0     0     0
-hackkernel-doc                                 0     0     0
-hackkernel-headers                             0     0     0
-hackkernel-pcmcia-cs                           0     0     0
-hackkernel-source                              0     0     0
-happy                                          0     0    25
-harddrake                                     83     0    83
-haskell-GTK                                    0     0    10
-haskell-GTK-devel                              0     0    10
-hdparm                                        98    98    98
-heartbeat                                     -1    25    -1
-hexedit                                       91    91    91
-howto-html-de				     -30   -30   -30
-howto-html-el				     -30   -30   -30
-howto-html-en				     -30   -30   -30
-howto-html-es				     -30   -30   -30
-howto-html-fr				     -30   -30   -30
-howto-html-hr				     -30   -30   -30
-howto-html-id				     -30   -30   -30
-howto-html-it                                -30   -30   -30
-howto-html-ja				     -30   -30   -30
-howto-html-ko				     -30   -30   -30
-howto-html-pl				     -30   -30   -30
-howto-html-ro				     -30   -30   -30
-howto-html-sl				     -30   -30   -30
-howto-html-sv				     -30   -30   -30
-howto-html-zh                                -30   -30   -30
-howto-utils                                    0     0     0
-hugs98                                         0     0    15
-hylafax                                        0     0     0
-hylafax-client                                 0     0     0
-hylafax-server                                 0     0     0
-ibtk                                          20     0    13
-ical                                          40     0    27
-icepref                                       50     0    54
-icewm                                         65     0    78
-icewm-light                                   90     0    80
-imap                                           0    80     6
-imap-devel                                     0     0     6
-imlib                                         10     0    71
-imlib-cfgeditor                               70     0    71
-imlib-devel                                   10     0    50
-imwheel                                       78    60    73
-indent                                        20     0    91
-indexhtml                                      0    87    76
-inews                                          6    12    15
-info                                          20    65    70 
-info-install                                   0     0    10
-initscripts                                   99    99    99
-inn                                            0    55     0
-inn-devel                                      0     0     0
-intimed                                        0    55    10
-ipchains                                      15    98    13
-iplog                                         15    15    15               
-iproute2                                       0    30     0
-ipvsadm                                        0    15     0
-ipxutils                                      20    85     9
-irda-utils                                    -1    -1    -1
-irssi                                         59     0    57
-isapnptools                                   43    73    73
-isapnptools-devel                              0     0    70
-isdn4k-utils                                 -99   -99   -99
-isdn4net                                     -99   -99   -99
-isicom                                        20     0    13
-ispell                                        49    15    22
-ispell-af                                    -15   -15   -15
-ispell-br                                    -15   -15   -15
-ispell-ca                                    -15   -15   -15
-ispell-cs                                    -15   -15   -15
-ispell-da                                    -15   -15   -15
-ispell-de                                    -15   -15   -15
-ispell-el                                    -15   -15   -15
-ispell-en                                    -15   -15   -15
-ispell-eo                                    -15   -15   -15
-ispell-es                                    -15   -15   -15
-ispell-fi                                    -15   -15   -15
-ispell-fr                                    -15   -15   -15
-ispell-ga                                    -15   -15   -15
-ispell-gd                                    -15   -15   -15
-ispell-gv                                    -15   -15   -15
-ispell-id                                    -15   -15   -15
-ispell-it                                    -15   -15   -15
-ispell-nl                                    -15   -15   -15
-ispell-no                                    -15   -15   -15
-ispell-pl                                    -15   -15   -15
-ispell-pt                                    -15   -15   -15
-ispell-pt_BR                                 -15   -15   -15
-ispell-ro                                    -15   -15   -15
-ispell-ru                                    -15   -15   -15
-ispell-sk                                    -15   -15   -15
-ispell-sl                                    -15   -15   -15
-ispell-sv                                    -15   -15   -15
-itcl                                          10     0    60
-jadetex                                       15     0    45
-jed                                           16    18    14
-jed-common                                     0    18     0
-jed-xjed                                      40     0    22
-jikes                                          1     0    65
-joe                                           20    20    15
-kaffe                                         10     0    60
-kdbg                                          15     0    27
-kde1-compat                                    0     0     0
-kde1-compat-devel                              0     0     0
-kdeaddutils                                   73     0    62
-kdeaddutils-devel                              1     1    50
-kdeadmin                                      72     0    60
-kdebase                                       79    40    68
-kdebase-devel                                  1     1    60
-kdegames                                      71     0    59
-kdegraphics                                   77    40    66
-kdegraphics-devel                              1     1    60
-kdelibs                                        0     0     0
-kdelibs-devel                                  1     1    60
-kdelibs-sound                                 60     0    55
-kdelibs-sound-devel                            1     1    60
-kdemultimedia                                 77     0    66
-kdemultimedia-devel                            1     1    60
-kdenetwork                                    72     0    60
-kdenetwork-devel                               1     1    60
-kdepim                                        72     0    63
-kdesdk                                         0     0    35
-kdesupport                                     0     0     0
-kdesupport-devel                               0     0    15
-kdetoys                                       70     0    65
-kdeutils                                      78     0    67
-kdiff                                          0     0     0
-kdiskcat                                       0     0     0
-kdoc                                           0     0    35
-kernel                                        99    99    99
-kernel-doc                                     5    50    65
-kernel-headers                                 1    45    94
-kernel-linus                                  -1    -1    -1
-kernel-pcmcia-cs                              -1    -1    -1
-kernel-secure                                  0     0     0
-kernel-smp                                    -1    -1    -1
-kernel-source                                  0    45    65
-kernel-utils                                   0     5    25
-kfilecoder                                     0     0     0
-kfirewall                                      0     0     0
-kfortune                                       0     0     0
-kfsstatus                                      0     0     0
-kfun21                                         0     0     0
-kimon                                          0     0     0
-kinput2-wnn4                                 -15   -15   -15
-kisocd                                         0     0     0
-kless                                          0     0     0
-klilo                                          0     0     0
-klyx                                           0     0     0
-kmag                                           0     0     0
-kmol                                           0     0     0
-kmp3                                           0     0     0
-kmp3te                                         0     0     0
-koffice                                       69     0    55
-koffice-devel                                  0     0    35
-kon2                                         -12   -60   -15
-kover                                         69     0    60
-kpacman                                        0     0     0
-kreglo                                         0     0     0
-krubik                                         0     0     0
-ksendfax                                       0     0     0
-kslide                                         0     0     0
-ktail                                          0     0     0
-ktelnet                                        0     0     0
-kterm                                        -10   -90   -10
-kudzu                                         97     0    97
-kudzu-devel                                    0     0    43
-kups                                          60     0    50
-kups-devel                                     0     0     0
-kvideogen                                      0     0     0
-kvirc                                         69     0    56
-kvoice                                         0     0     0
-kvoicecontrol                                  0     0     0
-kwebget                                        0     0     0
-lame                                          15    40    35
-latex2html                                    25     0    50
-latte                                          0     0    45
-ld.so                                         98    98    98
-leafnode                                       0    50     0
-less                                          97    97    97
-lesstif                                        0     0     0
-lesstif-clients				       0     0     0
-lesstif-devel				       0     0     0
-lesstif-mwm                                    2     0     2
-lftp                                          50    78    83
-lha                                           40    25    72
-libPropList                                   10     0    80
-libPropList-devel                              0     0    34
-libc                                          10    15    75
-libelf                                        10    15    80
-libghttp                                      10     0    55
-libghttp-devel                                10     0    55
-libglade                                      10     0    55
-libglade-devel                                10     0    40
-libgr                                         10     0    71
-libgr-devel                                   10     0    70
-libgr-progs                                   10     0     9
-libgtop                                       10     0    55
-libgtop-devel                                 10     0    55
-libjpeg                                       10     0    71
-libjpeg-devel                                 10     0    70
-libmikmod                                     10     0    55
-libmikmod-devel                               10     0    55
-libnet                                        97    97    97
-libole2                                        0     0     0
-libole2-devel                                  0     0     0
-libpcap                                       10    80    72
-libpcap-devel                                  0     0     0
-libpng                                        10     0    71
-libpng-devel                                  10     0    71
-librep                                        10     0    50
-librep-devel                                  10     0    50
-libsafe                                        0     0    35
-libsigc++                                      0     0    25
-libsigc++-devel                                0     0    25
-libsigc++-examples                             0     0    25
-libstdc++                                     10     0    80
-libstdc++-compat                              10     0    60
-libstdc++-devel                               10     0    80
-libtabe                                      -15   -90   -15
-libtabe-devel                                -15   -90   -15
-libtermcap                                    10    55    87
-libtermcap-devel                              10     0    64
-libtiff                                       10     0    72
-libtiff-devel                                 10     0    72
-libtool                                       10     0    85
-libtool-devel                                  0     0     0
-libungif                                      10     0    72
-libungif-devel                                10     0    72
-libungif-progs                                10     0     2
-libunicode                                    10     0    80
-libunicode-devel                               0     0    50
-libwmf                                         0     0    15
-libxml                                        10     0    71
-libxml-devel                                  10     0    71
-libxml2                                       10     0    71
-libxml2-devel                                 10     0    71
-licq                                          62     0    45
-licq-autoreply                                45     0    30
-licq-console                                  45     0    30
-licq-devel				       0     0    20
-licq-forwarder                                45     0    30
-licq-rms				      45     0    30
-licq-update-hosts                             45     0    30
-lilo                                          99    99    99
-lilo-doc                                       0     0    30
-links                                         20    25    20
-linux_logo                                    92    72    92
-linuxconf                                     90    79    86
-linuxconf-gui                                 -1    -1    -1
-linuxconf-lib                                  0     0     0
-linuxconf-util                                 0     0     0
-linuxconf                                     90    79    86
-linuxconf-devel                               10     0    70
-lkmpg                                          2     0    65
-locales                                       96    76    96
-locales-af                                    -1    -1    -1
-locales-ar                                    -1    -1    -1
-locales-az                                    -1    -1    -1
-locales-be				      -1    -1    -1
-locales-bg                                    -1    -1    -1
-locales-br                                    -1    -1    -1
-locales-ca                                    -1    -1    -1
-locales-cs                                    -1    -1    -1
-locales-cy                                    -1    -1    -1
-locales-da                                    -1    -1    -1
-locales-de                                    -1    -1    -1
-locales-el                                    -1    -1    -1
-locales-en                                    -1    -1    -1
-locales-eo                                    -1    -1    -1
-locales-es                                    -1    -1    -1
-locales-et                                    -1    -1    -1
-locales-eu                                    -1    -1    -1
-locales-fa                                    -1    -1    -1
-locales-fi                                    -1    -1    -1
-locales-fo                                    -1    -1    -1
-locales-ur                                    -1    -1    -1
-locales-fr                                    -1    -1    -1
-locales-ga                                    -1    -1    -1
-locales-gd                                    -1    -1    -1
-locales-gl                                    -1    -1    -1
-locales-gv                                    -1    -1    -1
-locales-he                                    -1    -1    -1
-locales-hi				      -1    -1    -1
-locales-hr                                    -1    -1    -1
-locales-hu                                    -1    -1    -1
-locales-hy                                    -1    -1    -1
-locales-id                                    -1    -1    -1
-locales-is                                    -1    -1    -1
-locales-it                                    -1    -1    -1
-locales-ja                                    -1    -1    -1
-locales-ka                                    -1    -1    -1
-locales-kl                                    -1    -1    -1
-locales-ko                                    -1    -1    -1
-locales-kw                                    -1    -1    -1
-locales-lo                                    -1    -1    -1
-locales-lt                                    -1    -1    -1
-locales-lv                                    -1    -1    -1
-locales-mi				      -1    -1    -1
-locales-mk                                    -1    -1    -1
-locales-ms                                    -1    -1    -1
-locales-nl                                    -1    -1    -1
-locales-no                                    -1    -1    -1
-locales-oc                                    -1    -1    -1
-locales-pd                                    -1    -1    -1
-locales-ph				      -1    -1    -1
-locales-pl                                    -1    -1    -1
-locales-pp                                    -1    -1    -1
-locales-pt                                    -1    -1    -1
-locales-ro                                    -1    -1    -1
-locales-ru                                    -1    -1    -1
-locales-sk                                    -1    -1    -1
-locales-sl                                    -1    -1    -1
-locales-sq				      -1    -1    -1
-locales-sr                                    -1    -1    -1
-locales-sv                                    -1    -1    -1
-locales-ta				      -1    -1    -1
-locales-tg				      -1    -1    -1
-locales-th                                    -1    -1    -1
-locales-tr                                    -1    -1    -1
-locales-tt                                    -1    -1    -1
-locales-uk                                    -1    -1    -1
-locales-vi                                    -1    -1    -1
-locales-wa                                    -1    -1    -1
-locales-yi                                    -1    -1    -1
-locales-zh                                    -1    -1    -1
-logrotate                                      0    25    15
-losetup                                        5    45    35
-lout                                          15    35    10
-lout-doc                                      31    32    10
-lpg                                           40     0    80
-lpr                                          -99   -99   -99
-lrzsz                                          0    34     0
-lslk                                          20    49    54
-lsof                                          10     0    67
-ltrace                                        10     0     0
-lynx                                          42    78    84
-lyx                                           50     0    58
-m4                                            15     0    80
-macutils                                      22     5    19
-mailcap                                        5     5     4
-mailx                                         92    92    92
-make                                          50    50    94
-man                                           90    65    72
-man-pages                                     90    65    72
-man-pages-cs                                 -10   -30   -25
-man-pages-de                                 -10   -30   -25
-man-pages-es                                 -10   -30   -25
-man-pages-fr                                 -10   -30   -25
-man-pages-hu                                 -10   -30   -25
-man-pages-id                                 -10   -30   -25
-man-pages-it                                 -10   -30   -25
-man-pages-ja                                 -10   -30   -25
-man-pages-ko                                 -10   -30   -25
-man-pages-pl                                 -10   -30   -25
-man-pages-ru                                 -10   -30   -25
-man-pages-zh                                 -10   -30   -25
-mandrake-release                              99    99    99
-mandrake_desk                                 88     0    88
-mandrake_doc-de                              -15   -90	 -25
-mandrake_doc-en                              -15   -90	 -25
-mandrake_doc-es                              -15   -90	 -25
-mandrake_doc-fr                              -15   -90	 -25
-mandrake_doc-it                              -15   -90	 -25
-mandrake_doc-ru                              -15   -90	 -25
-mars-nwe                                       0    35     0
-mathplot                                      30     0    20
-mawk                                           0    25    80
-mc                                            49    45    31
-mcserv                                         0    40     9
-mek                                           40     0     0
-memprof                                        2     5    65
-menu                                          90     0    80
-menudrake       			      79    75    75
-userdrake       			      50     0    40
-mercury                                        0     0    45
-metamail                                      40    80    50
-mgetty                                        24    20     9
-mgetty-contrib                                28    20    15
-mgetty-sendfax                                28    20    15
-mgetty-viewfax                                28    20    15
-mgetty-voice                                  28    20    15
-mikmod                                        42     0    10
-mingetty                                       5    25    15
-minicom                                       27     0     4
-mirrordir                                     26    99     0
-mkbootdisk                                    35    55    60
-mkinitrd                                      99    99    99
-mkisofs                                       26     0    13
-mktemp                                        15    75    65
-mkxauth                                        2    99     1
-mm                                             0     0    15
-mm-devel                                       0     0     0
-mod_php                                      -99    35   -99
-php-gd                                       -99    15   -99
-php-imap                                     -99    15   -99
-php-ldap                                     -99    15   -99
-php-mysql                                    -99    15   -99
-php-pgsql                                    -99    15   -99
-php-oracle                                   -99    15   -99
-php-dba_gdbm_db2                             -99    15   -99
-php-readline                                 -99    15   -99
-mod_ssl                                      -99    75   -99
-mod_ssl-sxnet                                -99    30   -99
-modutils                                      99    99    99
-mon                                            0    40     0
-mount                                         97    97    97
-mouseconfig                                    0     0     0
-mozilla-fonts                                  0     0     0
-mp3info                                       50    20    50
-mpage                                         55    65    80
-mpeg_lib        			       0     0     0
-mpeg_lib-devel                                 0     0    30
-mpeg_lib-devel                        	       0     0     0
-mpg123                                        42     0    42
-msec                                          98    98    98
-mt-st                                         40     0    49
-mtools                                        90     0    84
-mutt                                          10     0    10
-mxp                                            0     0     0
-nag                                           35    75    25
-nasm                                          20    20    65
-nasm-doc                                       0    20    65
-nasm-rdoff                                     0    20    65
-nc                                             0     0     0
-ncftp                                         55     0    49
-sftp                                          15    10    15
-ncompress                                     42    79    91
-ncpfs                                          0     0     0
-ncurses                                        0     0    80
-ncurses-extraterms                             0     0     0
-ncurses-devel                                 10     0    75
-nedit                                         45    20    65
-net-tools                                     95    96    95
-netkit-base                                   82    99    82
-netscape-castellano                          -13   -30   -18
-netscape-catalan                             -13   -30   -18
-netscape-common                                0     0     0
-netscape-communicator                         78    60    73
-netscape-euskara                             -13   -30   -18
-netscape-francais                            -13   -30   -18
-netscape-german                              -13   -30   -18
-netscape-japanese                            -13   -30   -18
-netscape-navigator                             0     0     0
-netscape-polish                              -13   -30   -18
-netscape-russian                             -13   -30   -18
-netscape-spanish                             -13   -30   -18
-netscape-walon                               -13   -30   -18
-newt                                          10     0    75
-newt-devel                                    10     0    75
-nfs-utils                                    -99    80    13
-nfs-utils-clients                             23    75    23
-nist                                          55     0    45
-nmap                                           5    40    40
-nmap-frontend                                  5    40    40
-nmh                                            0     0     0
-nscd                                           0    40     0
-nss_ldap                                       0    55    25
-ntp                                           -1    -1    -1
-ntsysv                                         0    65    25
-numlock                                      -11   -11   -11
-oaf                                            0     0     0
-oaf-devel                                      0     0     0
-ocaml                                          0     0    35
-octave                                         0     0    30
-oggvorbis                                     30    10    20
-oggvorbis-devel                                0     0    15
-oggvorbis-examples                             0     0    15
-open                                          20    45    80
-openjade                                       5    15    15
-openldap                                       0    50    35
-openldap-devel                                 0     0    25
-openssl                                        0     0     0
-openssl-devel                                  0     0     0
-oregano                                        0     0     0
-p2c                                           10     0    71
-p2c-devel                                     10     0    55
-pam                                            7    99    91
-pam-devel                                      0     0     0
-pam-doc                                        0    50    50
-pan                                           22     0     0
-pango                                         10     0    10
-pango-devel                                    0     0    10
-parted                                        35    35    35
-parted-devel                                   0     0    35
-passwd                                        99    99    99
-patch                                         14     0    72
-pciutils                                      16    55    55
-pciutils-devel                                 0     0    20
-pdksh                                         10    25     9
-penguin-command                               35     0    10
-perl                                          20    19    90
-perl-Apache-Filter                             0     0     0
-perl-Apache-SSI                                0     0     0
-perl-Apache-Session                            0     0     0
-perl-Compress-Zlib                             0     0     0
-perl-Convert-BER                               0     0     0
-perl-DBI                                      10     0    65
-perl-DBIx-Recordset                            0     0     0
-perl-DB_File                                  10     0    50
-perl-Data-ShowTable                           10     0    50
-perl-Date-Calc                                 0     0     0
-perl-DateManip                                 0     0     0
-perl-Devel-Symdump                             0     0     0
-perl-Digest-MD5                               10     0    70
-perl-ExtUtils_F77                              0     0     0
-perl-File-Tail                                 0     0     0
-perl-GTK                                      10     0    72
-perl-GTK-GLArea                               10     0    70
-perl-GTK-GdkImlib                             10     0    70
-perl-GTK-Glade                                10     0    70
-perl-GTK-Gnome                                10     0    70
-perl-GTK-GtkHTML                               0     0     0
-perl-HTML-Clean                                0     0     0
-perl-HTML-Parser                              10     0    55
-perl-HTML-SimpleParse                         10     0    50
-perl-IO-stringy                                5     0    65
-perl-MIME-Base64                               5     0    45
-perl-MIME-tools                                5     0    50
-perl-MLDBM                                     0     0     0
-perl-MP3-Info                                  5     0    40
-perl-Magick                                    0     0     0
-perl-MailTools                                 5     0    50
-perl-Mon                                       0     0     0
-perl-Msgcat                                    5     0    50
-perl-Mysql                                     5     0    40
-perl-Net-Telnet                                0     0     0
-perl-Net_SSLeay                                0     0     0
-perl-PDL                                      10     0    75
-perl-PDL-doc                                   0     0     0
-perl-Parse-RecDescent                         10     0    75
-perl-Parse-Yapp                                0     0     0
-perl-Period                                    0     0     0
-perl-RPM                                       0     0     0
-perl-Storable                                  0     0     0
-perl-Term-Readline-Gnu                        10    10    88
-perl-Tie-Cache                                 0     0     0
-perl-Time-HiRes                                0     0     0
-perl-TimeDate                                  0     0     0
-perl-Tk                                        0    15     0
-perl-Tk-devel                                  0     0     0
-perl-Tk-doc                                    0     0     0
-perl-URI                                       5     0    50
-perl-XML-Parser                                0     0     0
-perl-XML-XSLT                                  0     0     0
-perl-base                                      0     0     0
-perl-devel                                     0     0    30
-perl-libnet                                   10    10    80
-perl-libwww-perl                              10    10    80
-perl-libxml-enno                               0     0     0
-perl-libxml-perl                               0     0     0
-perl-Array-RefElem                             0     0     0
-perl-Data-DumpXML                              0     0     0
-perl-ExtUtils-PerlPP                           0     0     0
-perl-File-NCopy                                0     0     0
-perl-Image-Size                                0     0     0
-perl-Mail-Sendmail                             0     0     0
-perl-Net-XWhois                                0     0     0
-perl-XML-RSS                                   0     0     0
-perlftlib                                     10     0     0
-php                                            0    35     5
-php-devel                                      0     0     5
-php-manual                                     0     0     5
-pidentd                                       15    69    87
-pilot-link                                    40     0    27
-perl-PDA-Pilot                                 0     0     0
-pilot-link-devel                              11     0    25
-pine                                          40     0    27
-pinfo                                         20    20    20
-pingus                                        40     0    10
-piranha                                        0    10     0
-piranha-docs                                   0    10     0
-piranha-gui                                    0    10     0
-playmidi                                      43     0    19
-playmidi-X11                                  53     0    20
-plugger                                       40     0    40
-pmake                                         22     0    75
-pmake-customs                                 12     0    72
-popt                                          10     0    80
-popt-devel                                     0     0    45
-portmap                                        0    91    19
-postfix                                       20    88    51
-postgresql                                     0    56    23
-postgresql-devel                               0     0    23
-postgresql-jdbc                                0     0    15
-postgresql-odbc                                0     0    23
-postgresql-perl                                0     0    23
-postgresql-python                              0     0     5
-postgresql-server                              0    56    23
-postgresql-tcl                                 0     0    23
-postgresql-test                                0     0    23
-postgresql-tk                                  0     0     5
-ppp                                            0     0     0
-pppoe-linuxconf                                0     0     0
-pptp-adsl-fr                                 -99   -99   -99
-pptp-client                                  -99   -99   -99
-procinfo                                      24    15    96
-procmail                                       2    65    45
-procps                                        98    98    98
-procps-X11                                    50     0    32
-procps-devel                                   0     0     0
-proftpd                                      -99   -99   -99
-psacct                                        20    70    87
-psmisc                                        25    62    56
-pspell                                         0     0     0
-pspell-devel                                   0     0     0
-psutils                                        5    42    15
-pth                                            0     0    25
-pth-devel                                      0     0    15
-publib-devel                                   0     0     0
-pump                                           0     0     0
-pump-devel                                     0     0     0
-pwdb                                          13    90    75
-pwdb-devel                                     0     0    50
-pygnome                                       12     0    50
-pygnome-applet                                10     0    30
-pygnome-capplet                               10     0    30
-pygnome-libglade                              10     0    30
-pygtk                                         13     0    50
-pygtk-glarea                                  15     0    25
-pygtk-libglade                                16     0    50
-pysol                                         27     0    27
-python                                        15     0    74
-python-devel                                   0     0    65
-python-docs                                   31     0    40
-python-imaging                                31     0    40
-pythonlib                                     17     0    75
-qcad                                           5     0     5
-qiv                                           78     0    70
-qt                                             0     0    55
-qt-devel                                      10     0    55
-qt-qgl                                        10     0    50
-qt-qimgio                                     10     0    50
-qt2                                            0     0    45
-qt2-devel                                      0     0    45
-qt2-doc                                        0     0    30
-qtcups                                         0     0     0
-qtcups-devel                                   0     0     0
-queso                                          0    25    35
-quota                                         42    85    37
-raidtools                                     25    85     4
-rcs                                           12     0    71
-rdate                                         10    80     9
-rdist                                         10    75     9
-readline                                      11     0    70
-readline-devel                                11     0    65
-recode                                        10     0    72
-recode-devel                                   0     0    50
-reiserfs-utils                                60    60    60
-rep-gtk                                        0     0    20
-rep-gtk-gnome                                  0     0    20
-rep-gtk-libglade                               0     0    20
-rgrep                                         55    55    75
-rhs-printfilters                               1     1     0
-rmt                                           24     0    24
-rocksndiamonds                                35     0    10
-rootfiles                                     99    99    99
-routed                                         0    90    19
-rp-pppoe                                     -99   -99   -99
-rpm                                           99    99    99
-rpm-build                                     45    45    70
-rpm-devel                                     10     0    80
-rpm-python                                     0     0    50
-rpmdrake                                      84     0    81
-rpmlint                                       10    10    60
-rpmtools                                       0     0    25
-rpmtools-compat                                0     0     0
-rpmtools-devel                                 0     0    25
-rsh                                           46    99    75
-rsh-server                                   -99    55    25
-rsync                                         20    99    75
-ruby                                           0     0    25
-ruby-doc				       0     0    25
-ruby-extensions				       0     0    25
-ruby-gtk                                       0     0    25
-rusers                                        20     0    20
-rute                                         -50   -75   -60
-rwall                                         -1     0    -1
-rwho                                          -1     0    -1
-rxvt                                          49     0    80
-rxvt-CLE                                     -10   -90   -10
-sag                                           39    35    25
-samba                                         21    99    23
-samba-client                                  55    56    50
-samba-common                                   0     0     0
-sane                                          45     0    53
-sane-devel                                    10     0     2
-sash                                           5     5     5
-sawfish                                       59     0    57
-sawfish-themer                                15     0    15
-sawfish-themes                                50     0    50
-screen                                        26    43    79
-sed                                           97    97    97
-sendmail                                     -99   -99   -99
-sendmail-cf                                    0     0     0
-sendmail-doc                                   0     0     0
-setserial                                     42     0    55
-setup                                         15    25    15
-sfm                                           25     0    25
-sgml-common                                    5    15    15
-sgml-tools                                     5    15    15
-sh-utils                                      97    97    97
-shadow-utils                                  98    98    98
-shapecfg                                      20    75     8
-sharutils                                     43    99    38
-sketch                                        45     0     0
-slang                                         12     0    75
-slang-devel                                   10     0    70
-slang-doc                                      0     0    70
-slocate                                       99    99    99
-slrn                                          10     0    10
-slrn-pull                                     35     0    45
-smpeg                                         50     0    25
-smpeg-devel                                    0     0    25
-sndconfig                                     70    40    70
-sox                                           41    32    80
-sox-devel                                     13     0    70
-space_sounds                                  52     0    55
-spacecup                                      -1    -1    -1
-spec-helper                                    0     0    35
-spellutils                                     0     0     0
-spruce                                         0     0     0
-squid                                          0    45    16
-stat                                           5    55    45
-statserial                                    15     0    13
-strace                                        11     0    87
-sudo                                           0    30     0
-svgalib                                       10     0    63
-svgalib-devel                                 10     0    63
-swatch                                        22    65     4
-swi-prolog                                     5     5    45
-swig                                           0     0    20
-swig-devel                                     0     0    10
-symlinks                                      23    75    29
-sympa                                         -1    40    -1
-sysklogd                                      97    97    97
-t1lib                                          1     0    29
-t1lib-devel                                   10     0    40
-taipeifonts                                  -10     0   -10
-talk                                          44     0    39
-talk-server                                    0     0     0
-taper                                         42     0    27
-tar                                           97    97    97
-tcl                                           12     0    70
-tcllib                                         0     0     0
-tclx                                          12     0    70
-tcp_wrappers                                   0    99     0
-tcp_wrappers-devel                             0     0     0
-tcpdump                                       10    79     2
-tcsh                                           1    25    15
-telnet                                        90    79    92
-openssh                                       65    75    65
-openssh-server                               -99    35   -99
-openssh-clients                               65    75    65
-openssh-askpass                                0     0     0
-openssh-askpass-gnome                          0     0     0
-gnupg                                         90    90    90
-telnet-server                                -99    28   -99
-termcap                                       98    98    98
-tetex                                         25     0    50
-tetex-afm                                     25     0    40
-tetex-doc                                     25     0    40
-tetex-dvilj                                   40     0    40
-tetex-dvips                                   25     0    40
-tetex-latex                                   25     0    40
-tetex-latex-heb                              -65   -90   -90
-tetex-xdvi                                    25     0    50
-texinfo                                       22     0    50
-textutils                                     99    99    99
-teyjus                                         0     0    35
-tftp                                           0    40     2
-tftp-server                                    0    40     2
-thud                                           0     0     0
-time                                          40    65    87
-timeconfig                                    55    80    60
-timed                                         40    70    36
-timetool                                      54     0    57
-timidity-instruments                          51     0    54
-tin                                           44     0    39
-tix                                           15     0    60
-tk                                            15     0    60
-tkbabel                                       15     0    15
-tkcvs                                         15     0    15
-tkinter                                       15     0    60
-tksysv                                        55     0    60
-tmake                                         10     0    25
-tmpwatch                                      35    75    60
-traceroute                                    40    79    29
-transfig                                      16     0    14
-tree                                          40    25    10
-trn                                           46     0    41
-trophy                                        35     0    10
-tunelp                                        24    15    28
-tuxracer                                      -1    -1    -1
-ucd-snmp                                       0    70    45
-ucd-snmp-devel                                 0    25    45
-ucd-snmp-utils                                 0    37    45
-umb-scheme                                    10     0    65
-unarj                                         40    45    16
-units                                         22     0    10
-unixODBC                                       0     0     0
-unzip                                         70    75    91
-urlview                                       43     0    47
-urpmi                                         95    95    95
-urw-fonts                                     50     0    34
-usbview                                        5     0    10
-usermode                                      51     0    58
-usernet                                       42    55    37
-utempter                                      90     0    73
-utempter-devel                                 0     0     0
-util-linux                                    98    98    98
-uucp                                           0    80     2
-uxcook                                         0     0     0
-vigmeup                                       23     0    11
-vim-X11                                       52     0    26
-vim-common                                     0    19     0
-vim-enhanced                                  46    78    83
-vim-minimal                                   98    98    98
-vimguide                                      30     0    25 
-vixie-cron                                    97    97    97
-vlock                                         40    99    80
-vnc                                           44     0    39
-vnc-SVGALIB                                   43     0    38
-vnc-doc                                       38    35    33
-vnc-java                                      38     0    34
-vnc-server                                     0    40    28
-webmin                                        20    40    20
-wget                                          65    75    53
-which                                          1    25    25
-wine                                          54     0    57
-wine-devel                                     0     0     0
-wmakerconf                                    47     0    57
-wmnet                                         24     0    21
-words                                         47    85    42
-wu-ftpd                                      -99    85   -99
-wv                                            55     0    54
-wv-devel                                       0     0     0
-x3270                                          1     0     0
-xa+cv                                        -10   -20   -10
-xalf                                          68     0    55
-xanim                                         58     0    54
-xbanner                                       15     0    12
-xboard                                        54     0    48
-xboing                                        53     0    47
-xcdroast                                      59     0    53
-xchat                                         58     0    52
-xcin                                         -10   -10   -10
-xcpustate                                     53     0    47
-xdaliclock                                    57     0    51
-xdelta                                        16     0     5
-xdelta-devel                                  10     0     2
-xdosemu                                       34     0    37
-xearth                                        53     0    56
-xemacs                                        57     0     0
-xemacs-el                                      0     0    15
-xemacs-extras                                 50     0    36
-xemacs-info                                   54     0    42
-xemacs-mule                                    0     0     0
-xfce                                           0     0     0
-xfig                                          39     0    33
-xfishtank                                     51     0    45
-xgammon                                       40     0    31
-xinetd                                         0     0     0
-xinetd-devel                                   0     0     0
-xinitrc                                        0     0     0
-xinput                                        10     0    30
-xjewel                                        58     0    52
-xkobo                                         57     0    51
-xli                                           65     0    60
-xlispstat                                      2     0    45
-xloadimage                                    45     0    30
-xlockmore                                     58     0    52
-xmailbox                                      53     0    47
-xmame                                         25     0    25
-xmess                                         25     0    15
-xmms                                          64     0    57
-xmms-devel                                     0     0    15
-xmms-esd                                      46     0    41
-xmms-gnome                                    62     0    52
-xmms-kjofol-skins                             50     0    50
-xmms-mesa                                     -1    -1    -1
-xmms-mikmod                                   43     0    38
-xmms-more-vis-plugins                         55     0    55
-xmms-oggvorbis                                64     0    57
-xmms-skins                                    60     0    55
-xmms-smpeg                                    50     0    45
-xmorph                                        52     0    44
-xmovie                                        55     0    35
-xntp3                                          0    75    31
-xoscope                                       10     0    10
-xosview                                       51     0    45
-xpaint                                        53     0    47
-xpat2                                         43     0    38
-xpcd                                          40     0    30
-xpcd-gimp                                     30     0    25
-xpcd-svga                                      0     0     0
-xpdf                                          57     0    51
-xpilot                                        59     0    53
-xpm                                           52     0    64
-xpm-devel                                     10     0    56
-xpp                                           60     0    50
-xpuzzles                                      50     0    43
-xrally                                         5     0     5
-xrn                                           55     0    49
-xscreensaver                                  68     0    55
-xscreensaver-gl                               -1    -1    -1
-xsoldier                                      51     0    45
-xsysinfo                                      55     0    56
-xterm                                         87     0    80
-xtoolwait                                     50     0    35
-xtraceroute                                   50     0    40
-xtrojka                                       51     0    45
-xwc                                           65     0    40
-xwpe                                           0     0    20
-xwpe-X11                                       0     0    20
-xwpick                                        55     0    49
-xxgdb                                         53     0    47
-yodl                                           0     0     0
-yp-tools                                       0    40     0
-ypbind                                         0    40     0
-ypserv                                         0     0     0
-ytalk                                         21    75    18
-yudit                                         50     0    38
-zgv                                           15     0    13
-zip                                           70    65    87
-zlib                                          16    60    94
-zlib-devel                                    10     0    72
-zsh                                           20    50    72
-zsh-doc                                        0    35    60
-jpilot                                        40     0    30
-jpilot-Mail                                   12     0    10
-jpilot-syncmal                                12     0    10
-jpilot-plugin-devel                            0     0     0
-Maelstrom                                     50     0    35
-auctex                                         5     0     5
-bcast                                         15     0    10
-mpeg2_movie                                   10     0     8
-bg5ps                                        -10   -10   -10
-eroaster                                      55     0    45
-everybuddy                                    52     0    52
-jabber                                         0    30     0
-libjabber                                      0     0     0
-libjabber-devel                                0     0     0
-gabber                                        35    10    20
-gdk-pixbuf-gnomecanvas                         0     0     0
-gdk-pixbuf-loaders                             0     0     0
-gdk-pixbuf-xlib                                0     0     0
-htdig                                         20     0    15
-libxode                                        0     0     0
-libxode-devel                                  0     0     0
-libgnet                                        0     0     0
-libgnet-devel                                  0     0     0
-libetherx                                      0     0     0
-libetherx-devel                                0     0     0
-screem                                        55     0    60
-portsentry                                     0    15     0
-ttfprint                                     -10   -10   -10
-kde-i18n-Afrikaans                           -12   -51	 -23
-kde-i18n-Basque				     -12   -51	 -23
-kde-i18n-Brazil				     -12   -51	 -23
-kde-i18n-Breton				     -12   -51	 -23
-kde-i18n-British			     -12   -51	 -23
-kde-i18n-Bulgarian			     -12   -51	 -23
-kde-i18n-Catalan			     -12   -51	 -23
-kde-i18n-Chinese			     -12   -51	 -23
-kde-i18n-Chinese-Big5			     -12   -51	 -23
-kde-i18n-Croatian			     -12   -51	 -23
-kde-i18n-Czech				     -12   -51	 -23
-kde-i18n-Danish				     -12   -51	 -23
-kde-i18n-Dutch				     -12   -51	 -23
-kde-i18n-Esperanto			     -12   -51	 -23
-kde-i18n-Estonian			     -12   -51	 -23
-kde-i18n-Finnish			     -12   -51	 -23
-kde-i18n-French				     -12   -51	 -23
-kde-i18n-Galacian			     -12   -51	 -23
-kde-i18n-German				     -12   -51	 -23
-kde-i18n-Greek				     -12   -51	 -23
-kde-i18n-Hebrew				     -12   -51	 -23
-kde-i18n-Hungarian			     -12   -51	 -23
-kde-i18n-Icelandic			     -12   -51	 -23
-kde-i18n-Italian			     -12   -51	 -23
-kde-i18n-Japanese			     -12   -51	 -23
-kde-i18n-Korean				     -12   -51	 -23
-kde-i18n-Lithuanian			     -12   -51	 -23
-kde-i18n-Macedonian			     -12   -51	 -23
-kde-i18n-Maori				     -12   -51	 -23
-kde-i18n-Norwegian			     -12   -51	 -23
-kde-i18n-Norwegian			     -12   -51	 -23
-kde-i18n-Polish				     -12   -51	 -23
-kde-i18n-Portuguese			     -12   -51	 -23
-kde-i18n-Romanian			     -12   -51	 -23
-kde-i18n-Russian			     -12   -51	 -23
-kde-i18n-Serbian			     -12   -51	 -23
-kde-i18n-Slovak				     -12   -51	 -23
-kde-i18n-Slovenian			     -12   -51	 -23
-kde-i18n-Spanish			     -12   -51	 -23
-kde-i18n-Swedish			     -12   -51	 -23
-kde-i18n-Tamil				     -12   -51	 -23
-kde-i18n-Thai				     -12   -51	 -23
-kde-i18n-Turkish			     -12   -51	 -23
-kde-i18n-Ukrainian			     -12   -51	 -23
-kde-i18n-Walloon			     -12   -51	 -23
-kde-i18n-Welsh                               -12   -51	 -23
-kde-i18n-Norwegian-Nynorsk                   -12   -51	 -23
-linuxconf-lang-cn                            -35   -60   -35
-linuxconf-lang-cs		             -35   -60   -35
-linuxconf-lang-de		             -35   -60   -35
-linuxconf-lang-es			     -35   -60   -35
-linuxconf-lang-fi			     -35   -60   -35
-linuxconf-lang-fr			     -35   -60   -35
-linuxconf-lang-it			     -35   -60   -35
-linuxconf-lang-ko			     -35   -60   -35
-linuxconf-lang-no			     -35   -60   -35
-linuxconf-lang-pt			     -35   -60   -35
-linuxconf-lang-ro			     -35   -60   -35
-linuxconf-lang-ru-SU			     -35   -60   -35
-linuxconf-lang-se			     -35   -60   -35
-linuxconf-lang-sk			     -35   -60   -35
-linuxconf-lang-zh                            -35   -60   -35
-7colors                                       15     0     0
-ltris                                         28     0     0
-lbreakout                                     35     0     0
-fonts-hebrew-elmar                           -30   -30   -30
-kwintv                                         0     0     0
-xawtv                                          0     0     0
-xawtv-misc                                     0     0     0
-xawtv-radio                                    0     0     0
-wxxt                                           0     0     0
-wxxt-devel                                     0     0     0
-surfraw                                        0     0     0
-R-base                                         0     0     0
-gpa                                           20     0     0
-gnome-telnet                                   0     0     0
-quanta                                        32     0    24
-nslint                                         0    12     0
-logcheck                                       0    12     0
-kisdn-free                                    33     0    30
-
-# commercial                           
-ac3d                                          20     0    20
-acroread                                      24    15    24
-acroread-nppdf                                24    15    24
-IglooFTP-PRO                                  20    20    20
-interbase                                      0    15    15
-interbase-docs                                 0    15    15
-civctp-demo                                   22     0    20
-compupic                                      19     0    19
-commercial-menu                               50    40    50
-eus-demo                                      23     0    20
-myth2-demo                                    24     0    25
-macromedia-flash                              45    15    45
-RealPlayer                                    27    15    27
-RealPlayer-rpnp                               27    15    27
-scol                                          23     0    23
-avp-database                                  20    20    20
-avp-linux                                     20    20    20
-arkeia-arkc                                    0    20     0
-arkeia-client                                 20     0    20
-arkeia-gui                                    24     0    20
-arkeia-server-shareware                        0    30     0
-Artstream                                     20     0     0
-citrix-icaclient-en                          -70   -70   -70
-citrix-icaclient-fr                          -70   -70   -70
-citrix-icaclient-ge                          -70   -70   -70
-citrix-icaclient-sp                          -70   -70   -70
-printpro                                       0     0     0
-printpro-agfa                                  0     0     0
-printpro-alps                                  0     0     0
-printpro-apple                                 0     0     0
-printpro-autologic		               0     0     0
-printpro-calcomp		               0     0     0
-printpro-canon			               0     0     0
-printpro-digital		               0     0     0
-printpro-efi			               0     0     0
-printpro-encad			               0     0     0
-printpro-epson			               0     0     0
-printpro-hp			               0     0     0
-printpro-ibm			               0     0     0
-printpro-lexmark		               0     0     0
-printpro-lhag			               0     0     0
-printpro-linotronic		               0     0     0
-printpro-nec			               0     0     0
-printpro-oki			               0     0     0
-printpro-otheram		               0     0     0
-printpro-othernz		               0     0     0
-printpro-qms			               0     0     0
-printpro-seiko			               0     0     0
-printpro-sony			               0     0     0
-printpro-tektronix		               0     0     0
-printpro-ti			               0     0     0
-printpro-varityper		               0     0     0
-printpro-xerox                                 0     0     0
-emumail4.0                                     0    20     0
-EnlightenDSMFree                               0    24     0
-EnlightenDSMFree-dsa                           0    24     0
-EnlightenDSMFree-gui                           0    24     0
-ForteCE-FCS                                    0     0    30
-ViaVoice_Outloud_rtk                           0     0    45
-ViaVoice_Outloud_sdk                           0     0    45
-ViaVoice_runtime                               0     0    45
-ViaVoice_sdk                                   0     0    45
-jdk-sun                                        0     0    35
-jdk-sun-doc                                    0     0    35
-jre-sun                                       20     0    35
-heretic2-demo                                 24     0    24
-heroes3-demo                                  24     0    24
-rt2-demo                                      24     0    24
-MainActor                                     24     0     0
-mupad                                         20     0    20
-mtv                                           24     0    24
-mtv-fullscreen-extension                      15     0    15
-NetPartitioner                                 0    24     0
-omnimark                                       0     0    35
-rebol-core                                     0     0    30
-staroffice-de                                -64   -90   -64
-staroffice-en                                -64   -90   -64
-staroffice-fr                                -64   -90   -64
-staroffice-it                                -64   -90   -64
-staroffice-nl                                -64   -90   -64
-staroffice-pt                                -64   -90   -64
-staroffice-es                                -64   -90   -64
-staroffice-sv                                -64   -90   -64
-tina-base                                      0     0     0
-tina-lesstif                                   0     0     0
-tina-oracle80                                  0     0     0
-tina-oracle8i                                  0     0     0
-tina-server                                    0     0     0
-VMware                                        20     0    35
-VariCAD                                       24     0    24
-ViaVoice_runtime                              26     0    26
-<<<<<<< compssList
-viavoicemenu				      26     0    26
-=======
-viavoicemenu                                  26     0    26
->>>>>>> 1.139
-kisdn                                          0     0     0
diff --git a/perl-install/share/compssUsers b/perl-install/share/compssUsers
deleted file mode 100644
index 7becfcfd4..000000000
--- a/perl-install/share/compssUsers
+++ /dev/null
@@ -1,92 +0,0 @@
-     # --- Workstation
-
-Office Workstation [icon=office] [path=Workstation] [descr=Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc]
-	OFFICE
-	PUBLISHING
-	PIM
-
-Game station [icon=arcade] [path=Workstation] [descr=Amusement programs: arcade, boards, strategy, etc]
-	GAMES
-
-Multimedia station [icon=multimedia] [path=Workstation] [descr=Sound and video playing/editing programs]
-	AUDIO
-	VIDEO
-	GRAPHICS
-
-Internet station [icon=networking] [path=Workstation] [descr=Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web]
-	NETWORKING_WWW
-	NETWORKING_MAIL
-	NETWORKING_NEWS
-	COMMUNICATIONS
-	NETWORKING_CHAT
-	NETWORKING_FILE_TRANSFER
-	NETWORKING_IRC
-	NETWORKING_INSTANT_MESSAGING
-	NETWORKING_DNS
-
-Network Computer (client) [icon=terminals] [path=Workstation] [descr=Clients for different protocols including ssh]
-	NETWORKING_REMOTE_ACCESS
-	NETWORKING_FILE
-
-Configuration [icon=configuration] [path=Workstation] [descr=Tools to ease the configuration of your computer]
-	CONFIG
-        WEBMIN
-
-Scientific Workstation [icon=sciences] [path=Workstation] [descr=]
-	SCIENCES
-
-Console Tools [icon=terminals] [path=Workstation] [descr=Editors, shells, file tools, terminals]
-	EDITORS
-	TERMINALS
-	TEXT_TOOLS
-	SHELLS
-	FILE_TOOLS
-
-     # --- Graphical Environment
-
-KDE Workstation [icon=kde] [path=Graphical Environment] [descr=The K Desktop Environment, the basic graphical environment with a collection of accompanying tools]
-	KDE
-	X
-
-Gnome Workstation [icon=gnome] [path=Graphical Environment] [descr=A graphical environment with user-friendly set of applications and desktop tools]
-	GNOME
-	X
-
-Other Graphical Desktops [icon=windowmanager] [path=Graphical Environment] [descr=Icewm, Window Maker, Enlightenment, Fvwm, etc]
-	GRAPHICAL_DESKTOP
-	X
-
-
-     # --- Development
-
-Development [icon=editors] [path=Development] [descr=C and C++ development libraries, programs and include files]
-	DEVELOPMENT
-	EDITORS
-
-Documentation [icon=documentation] [path=Development] [descr=Books and Howto's on Linux and Free Software]
-	BOOKS
-
-     # --- Server
-
-Web/FTP  [icon=file_transfer] [path=Server] [descr=Apache, Pro-ftpd]
-	NETWORKING_WWW_SERVER
-	NETWORKING_FILE_TRANSFER_SERVER
-
-Mail/Groupware/News [icon=mail] [path=Server] [descr=Postfix mail server, Inn news server]
-	NETWORKING_MAIL_SERVER
-	NETWORKING_NEWS_SERVER
-
-Database [icon=archiving] [path=Server] [descr=PostgreSQL or MySQL database server]
-	DATABASES
-	DATABASES_SERVER
-
-Firewall/Router [icon=networking] [path=Server] [descr=Internet gateway]
-	NETWORKING_FIREWALLING_SERVER
-
-DNS/NIS [icon=hardware] [path=Server] [descr=Domain Name and Network Information Server] 
-	NIS_SERVER
-	NETWORKING_DNS_SERVER
-
-Network Computer server [icon=networking] [path=Server] [descr=NFS server, SMB server, Proxy server, ssh server]
-	NETWORKING_FILE_SERVER
-	NETWORKING_REMOTE_ACCESS_SERVER
diff --git a/perl-install/share/compssUsers.desktop b/perl-install/share/compssUsers.desktop
deleted file mode 100644
index f836d6731..000000000
--- a/perl-install/share/compssUsers.desktop
+++ /dev/null
@@ -1,39 +0,0 @@
-Office [icon=office] [descr=Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc]
-	Office
-
-Internet [icon=networking] [descr=Set of tools for mail, news, web, file transfer, and chat]
-	Networking
-
-Games [icon=amusement] [descr=Amusement programs: arcade, boards, strategy, etc]
-	Games
-
-Multimedia - Graphics [icon=graphics] [descr=Graphics programs such as The Gimp]
-	Graphics
-
-Multimedia - Sound [icon=multimedia] [descr=Audio-related tools: mp3 or midi players, mixers, etc]
-	Sound
-
-Multimedia - Video [icon=video] [descr=Video players and editors]
-	Video
-
-Multimedia - CD Burning [icon=cd_burning] [descr=Tools to create and burn CD's]
-	Archiving/Cd burning
-
-More Graphical Desktops (Gnome, IceWM) [icon=windowmanager] [descr=Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc]
-	Graphical desktop/GNOME
-	Graphical desktop/Sawmill
-	Graphical desktop/Icewm
-	+XFree86-75dpi-fonts
-	+fonts-ttf-west_european
-
-Personal Information Management [icon=remote_access] [descr=Tools for your Palm Pilot or your Visor]
-	+jpilot
-	+pilot-link
-	+kde-pim
-	+gnome-pim
-	+gnome-pim-conduits
-
-Personal Finance [icon=sciences] [descr=Programs to manage your finance, such as gnucash]
-	+gnucash
-	+MoneyDance
-
diff --git a/perl-install/share/compssUsers.server b/perl-install/share/compssUsers.server
deleted file mode 100644
index ac384122e..000000000
--- a/perl-install/share/compssUsers.server
+++ /dev/null
@@ -1,67 +0,0 @@
-     # --- Graphical Environment
-
-KDE Workstation [icon=kde] [path=Graphical Environment] [descr=The K Desktop Environment, the basic graphical environment with a collection of accompanying tools]
-	KDE
-	X
-
-Gnome Workstation [icon=gnome] [path=Graphical Environment] [descr=A graphical environment with user-friendly set of applications and desktop tools]
-	GNOME
-	X
-
-Other Graphical Desktops [icon=windowmanager] [path=Graphical Environment] [descr=XFce, Window Maker, IceWm]
-	GRAPHICAL_DESKTOP
-	X
-
-     # --- Development
-
-Development [icon=editors] [path=Development] [descr=C and C++ development libraries, programs and include files]
-	DEVELOPMENT
-
-Documentation [icon=documentation] [path=Development] [descr=Books and Howto's on Linux and Free Software]
-	BOOKS
-
-     # --- Server
-
-Web Server  [icon=file_transfer] [path=Server] [descr=Apache]
-	NETWORKING_WWW_SERVER
-
-Groupware [icon=mail] [path=Server] [descr=PHPgroupware]
-	NETWORKING_GROUPWARE_SERVER
-
-Firewall/Router [icon=networking] [path=Server] [descr=Internet gateway]
-	NETWORKING_FIREWALLING_SERVER
-
-Mail/News [icon=mail] [path=Server] [descr=Postfix mail server, Inn news server]
-	NETWORKING_MAIL_SERVER
-	NETWORKING_NEWS_SERVER
-
-Directory Server [icon=mail] [path=Server] [descr=LDAP server]
-	NETWORKING_LDAP_SERVER
-
-FTP Server [icon=file_transfer] [path=Server] [descr=Wu-FTPd]
-	NETWORKING_FILE_TRANSFER_SERVER
-
-DNS/NIS [icon=hardware] [path=Server] [descr=Domain Name and Network Information Server] 
-	NIS_SERVER
-	NETWORKING_DNS_SERVER
-
-File & Printer Sharing Server [icon=archiving] [path=Server] [descr=NFS server, Samba server] 
-	NETWORKING_FILE_SERVER
-
-Database [icon=archiving] [path=Server] [descr=PostgreSQL or MySQL database server]
-	DATABASES
-	DATABASES_SERVER
-
-     # --- Utilities
-
-SSH server [icon=networking] [path=Utilities] [descr=ssh server]
-	NETWORKING_REMOTE_ACCESS_SERVER
-
-Webmin [icon=archiving] [path=Utilities] [descr=webmin remote configuration server]
-	WEBMIN
-
-Network Utilities/Monitoring [icon=archiving] [path=Utilities] [descr=Monitoring tools, processes accounting, tcpdump, nmap, ...]
-	MONITORING	
-
-MandrakeSoft Wizards [icon=archiving] [path=Utilities] [descr=Wizards to configure servers]
-	WIZARDS
diff --git a/perl-install/share/consolefonts/Cyr_a8x16 b/perl-install/share/consolefonts/Cyr_a8x16
deleted file mode 100644
index a09ac03d8..000000000
--- a/perl-install/share/consolefonts/Cyr_a8x16
+++ /dev/null
diff --git a/perl-install/share/consolefonts/lat0-sun16 b/perl-install/share/consolefonts/lat0-sun16
deleted file mode 100644
index 19e3d432e..000000000
--- a/perl-install/share/consolefonts/lat0-sun16
+++ /dev/null
diff --git a/perl-install/share/consolefonts/lat2-sun16 b/perl-install/share/consolefonts/lat2-sun16
deleted file mode 100644
index 509e5def2..000000000
--- a/perl-install/share/consolefonts/lat2-sun16
+++ /dev/null
diff --git a/perl-install/share/consolefonts/ruscii_8x16 b/perl-install/share/consolefonts/ruscii_8x16
deleted file mode 100644
index b0513a9db..000000000
--- a/perl-install/share/consolefonts/ruscii_8x16
+++ /dev/null
diff --git a/perl-install/share/diskdrake.rc b/perl-install/share/diskdrake.rc
deleted file mode 100644
index 317fc2684..000000000
--- a/perl-install/share/diskdrake.rc
+++ /dev/null
@@ -1,43 +0,0 @@
-style "font"
-{
-  fontset = "-*-*-medium-r-normal-*-8-*-*-*-*-*-iso8859-1,*-r-*"
-}
-
-style "red" = "font"
-{
-  bg[NORMAL] = { 1.0, 0, 0 }
-  bg[PRELIGHT] = { 0.9, 0, 0 }
-}
-style "darkred" = "font"
-{
-  bg[NORMAL] = { 0.7, 0, 0 }
-  bg[PRELIGHT] = { 0.6, 0, 0 }
-}
-style "green" = "font"
-{
-  bg[NORMAL] = { 0, 1.0, 0 }
-  bg[PRELIGHT] = { 0, 0.9, 0 }
-  fg[NORMAL] = { 0, 0, 0 }
-}
-style "blue" = "font"
-{
-  bg[NORMAL] = { 0, 0, 1.0 }
-  bg[PRELIGHT] = { 0, 0, 0.9 }
-}
-style "white" = "font"
-{
-  bg[NORMAL] = { 1.0, 1.0, 1.0 }
-  bg[PRELIGHT] = { 0.67, 0.67, 0.67 }
-  fg[NORMAL] = { 0, 0, 0 }
-}
-
-widget "*Linux*"      style "red" 
-widget "*Ext2*"       style "red" 
-widget "*Journalised FS*"   style "darkred" 
-widget "*Linux swap*" style "green"
-widget "*Swap*"       style "green"
-widget "*FAT*"        style "blue"
-widget "*SunOS*"      style "blue"
-widget "*NT NTFS*"    style "blue"
-widget "*Empty*"      style "white"
-widget "*Other*"      style "font"
diff --git a/perl-install/share/floppy.png b/perl-install/share/floppy.png
deleted file mode 100644
index 2265e6ec6..000000000
--- a/perl-install/share/floppy.png
+++ /dev/null
diff --git a/perl-install/share/fonts.tar.bz2 b/perl-install/share/fonts.tar.bz2
deleted file mode 100644
index a663faa8f..000000000
--- a/perl-install/share/fonts.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/ftin.png b/perl-install/share/ftin.png
deleted file mode 100644
index 3cec3c194..000000000
--- a/perl-install/share/ftin.png
+++ /dev/null
diff --git a/perl-install/share/ftout.png b/perl-install/share/ftout.png
deleted file mode 100644
index d821716eb..000000000
--- a/perl-install/share/ftout.png
+++ /dev/null
diff --git a/perl-install/share/gen_locales.sh b/perl-install/share/gen_locales.sh
deleted file mode 100755
index 249db5c1a..000000000
--- a/perl-install/share/gen_locales.sh
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/sh
-
-rm -rf .tmp ; mkdir .tmp ; cd .tmp
-tar xfj ../locales-skeleton.tar.bz2
-
-# locale utf-8
-for i in LC_ADDRESS LC_COLLATE LC_IDENTIFICATION LC_MEASUREMENT LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE LC_TIME LC_MESSAGES/SYS_LC_MESSAGES ; do
-    cp -f /usr/share/locale/UTF-8/$i usr/share/locale/UTF-8/$i
-done
-
-# lc_ctype for common encoding
-for i in CP1251 ISO-8859-13 ISO-8859-14 ISO-8859-15 ISO-8859-2 ISO-8859-3 ISO-8859-7 ISO-8859-9 ISO-8859-9E ; do
-    f=usr/share/locale/$i/LC_CTYPE
-    [ -e /$f ] || { echo missing /$f ; exit 1 ; }
-    cp -f /$f $f
-done
-
-rm -rf .tmp2 ; mkdir .tmp2 ; cd .tmp2
-for i in hy ja ko th vi ; do
-    ii=locales-`echo $i | sed 's/\(..\).*/\1/'`
-    rpm2cpio /RPMS/$ii-*.rpm | cpio -id --quiet
-    f=usr/share/locale/$i/LC_CTYPE
-    [ -e $f ] || { echo missing $f in package $ii ; exit 1 ; }
-    cp -f $f ../$f
-    rm -rf *
-done
-cd .. ; rm -rf .tmp2
-
-# special case for chineese (why is it needed?)
-rm -rf .tmp2 ; mkdir .tmp2 ; cd .tmp2
-for i in zh_CN.GB2312 zh_TW.Big5 ; do
-    ii=locales-`echo $i | sed 's/\(..\).*/\1/'`
-    rpm2cpio /RPMS/$ii-*.rpm | cpio -id --quiet
-    for f in LC_ADDRESS LC_COLLATE LC_CTYPE LC_IDENTIFICATION LC_MEASUREMENT LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE LC_TIME LC_MESSAGES/SYS_LC_MESSAGES ; do
-	f=usr/share/locale/$i/$f
-	[ -e $f ] || { echo missing $f in package $ii ; exit 1 ; }
-	cp -f $f ../$f
-    done
-    rm -rf *
-done
-cd .. ; rm -rf .tmp2
-
-for i in common  C armscii-8 en_US.UTF-8 iso8859-1 iso8859-13 iso8859-14 iso8859-15 iso8859-2 iso8859-3 iso8859-5 iso8859-7 iso8859-9 iso8859-9e ja ko koi8-r koi8-u microsoft-cp1251 microsoft-cp1255 microsoft-cp1256 th_TH vi_VN.tcvn zh_CN zh_TW.big5 ; do
-    cp -a /usr/X11R6/lib/X11/locale/$i usr/X11R6/lib/X11/locale
-done
-
-tar cfj ../locales.tar.bz2 usr
-
-cd .. ; rm -rf .tmp
diff --git a/perl-install/share/help.png b/perl-install/share/help.png
deleted file mode 100644
index ddebe33ad..000000000
--- a/perl-install/share/help.png
+++ /dev/null
diff --git a/perl-install/share/install.rc b/perl-install/share/install.rc
deleted file mode 100644
index b86a22c29..000000000
--- a/perl-install/share/install.rc
+++ /dev/null
@@ -1,21 +0,0 @@
-style "default-font" 
-{
-  fontset = "-*-*-medium-r-normal-*-12-*-*-*-*-*-iso8859-15"
-}
-
-style "small-font"
-{
-  fontset = "-*-*-medium-r-normal-*-8-*-*-*-*-*-iso8859-15"
-}
-
-style "logo" = "background"
-{
-  # no background image
-  engine "pixmap" { image { function = FLAT_BOX } }
-}
-
-widget "*" style "default-font"
-widget "Steps" style "steps"
-widget "*Steps*" style "small-font"
-widget "*logo*" style "logo"
-
diff --git a/perl-install/share/keyboards.tar.bz2 b/perl-install/share/keyboards.tar.bz2
deleted file mode 100644
index 62939096c..000000000
--- a/perl-install/share/keyboards.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/keymaps.tar.bz2 b/perl-install/share/keymaps.tar.bz2
deleted file mode 100644
index 8ca03c137..000000000
--- a/perl-install/share/keymaps.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/keymaps_generate b/perl-install/share/keymaps_generate
deleted file mode 100755
index 0265502c9..000000000
--- a/perl-install/share/keymaps_generate
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/usr/bin/perl
-
-use lib "..";
-use keyboard;
-
-my $dir = "keymaps/usr/share/keymaps";
-system("rm -rf keymaps ; mkdir -p keymaps/usr/share/keymaps");
-
-foreach (keyboard::keyboards()) {
-    my $kmap = keyboard::keyboard2kmap($_);
-    if (system("./kmap2bkmap $kmap > $dir/$kmap.bkmap 2>/dev/null") != 0) {
-	warn "unknown kmap $kmap\n";
-	unlink "$dir/$kmap.bkmap";
-    }
-}
-
-system("tar cfj keymaps.tar.bz2 -C keymaps usr") == 0 or die;
-system("rm -rf keymaps");
diff --git a/perl-install/share/kmap2bkmap b/perl-install/share/kmap2bkmap
deleted file mode 100755
index 3aff35c3e..000000000
--- a/perl-install/share/kmap2bkmap
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/usr/bin/perl
-
-use lib "..";
-use c;
-
-my $KMAP_MAGIC = 0x8B39C07F;
-
-BEGIN { @ARGV == 1 or die "usage: kmap2bkmap <keymap>\n" }
-
-system("sudo loadkeys $ARGV[0]") == 0 or die;
-open F, "dumpkeys -n -f |";
-<F> =~ /^keymaps\s+(.*)/ or die;
-foreach (split ',', $1) {
-    my @l = /(\d+)-(\d+)/;
-    my ($i, $j) = @l ? @l : ($_,$_);
-    $keymaps[$_] = 1 foreach $i .. $j;
-}
-
-print pack("I", $KMAP_MAGIC);
-print map { pack "i", $keymaps[$_] || 0 } 0 .. c::MAX_NR_KEYMAPS()-1;
-
-foreach (<F>) {
-    s/\+0x/0x/g;
-    my ($keycode, $key, undef, @l) = split;
-    $keycode eq 'keycode' or next;
-    my $i = 0;
-    $L[$i++][$key] = hex $_ foreach @l;
-}
-close F or die "dumpkeys failed";
-
-foreach (@L) {
-    foreach my $i (0 .. c::NR_KEYS()-1) {
-	print pack "s", defined $_->[$i] ? $_->[$i] : 0x200;
-    }
-}
-
-exit 0;
diff --git a/perl-install/share/list b/perl-install/share/list
deleted file mode 100644
index 40465730b..000000000
--- a/perl-install/share/list
+++ /dev/null
@@ -1,168 +0,0 @@
-/bin/ash
-/bin/consolechars
-/bin/cpio
-/bin/gzip
-/lib/libnss_nis.so.2
-/lib/libnss_files.so.2
-/lib/libnss_dns.so.2
-/lib/libresolv.so.2
-/etc/protocols
-/etc/imrc
-/etc/im_palette.pal
-/sbin/badblocks
-/sbin/e2fsck
-/sbin/tune2fs
-/sbin/fdisk
-/sbin/insmod
-/sbin/losetup
-/sbin/mke2fs
-/sbin/modinfo
-/sbin/resize2fs
-/sbin/dumpe2fs
-/sbin/modinfo
-/usr/X11R6/lib/modules/xf86Wacom.so
-/usr/bin/bzip2
-/usr/bin/fb2png
-/usr/bin/packdrake
-/usr/bin/parsehdlist
-/usr/bin/perl
-/usr/lib/gconv/BIG5.so
-/usr/lib/gconv/EUC-JP.so
-/usr/lib/gconv/libGB.so
-/usr/lib/gconv/libJIS.so
-/usr/lib/gconv/libKSC.so
-/usr/lib/gconv/EUC-KR.so
-/usr/lib/gconv/ISO8859-15.so
-/usr/lib/gconv/ISO8859-14.so
-/usr/lib/gconv/ISO8859-13.so
-/usr/lib/gconv/ISO8859-9E.so
-/usr/lib/gconv/ISO8859-9.so
-/usr/lib/gconv/ISO8859-7.so
-/usr/lib/gconv/ISO8859-5.so
-/usr/lib/gconv/ISO8859-3.so
-/usr/lib/gconv/ISO8859-2.so
-/usr/lib/gconv/ISO8859-1.so
-/usr/lib/gconv/KOI8-K.so
-/usr/lib/gconv/KOI8-U.so
-/usr/lib/gconv/KOI8-R.so
-/usr/lib/gconv/TIS-620.so
-/usr/lib/gconv/CP1251.so
-/usr/lib/gconv/GEORGIAN-PS.so
-/usr/lib/gconv/EUC-CN.so
-/usr/lib/gconv/gconv-modules
-/usr/lib/gtk/themes/engines/libpixmap.so
-/usr/lib/gtk/themes/engines/libpixmap.la
-/usr/lib/libimlib-png.so
-/usr/lib/perl5/PERL_VERSION/AutoLoader.pm
-/usr/lib/perl5/PERL_VERSION/Carp.pm
-/usr/lib/perl5/PERL_VERSION/Carp/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/Exporter.pm
-/usr/lib/perl5/PERL_VERSION/Exporter/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/FileHandle.pm
-/usr/lib/perl5/PERL_VERSION/SelectSaver.pm
-/usr/lib/perl5/PERL_VERSION/SelfLoader.pm
-/usr/lib/perl5/PERL_VERSION/Symbol.pm
-/usr/lib/perl5/PERL_VERSION/Time/Local.pm
-/usr/lib/perl5/PERL_VERSION/IO/Socket/INET.pm
-/usr/lib/perl5/PERL_VERSION/IO/Socket/UNIX.pm
-/usr/lib/perl5/PERL_VERSION/dumpvar.pl
-/usr/lib/perl5/PERL_VERSION/warnings.pm
-/usr/lib/perl5/PERL_VERSION/warnings/register.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/File/Glob.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/File/Glob/Glob.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Config.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Data/Dumper.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/DynaLoader.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Errno.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Fcntl.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/XSLoader.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/Fcntl/Fcntl.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/File.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Handle.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Seekable.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Select.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Socket.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Socket.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/_h2ph_pre.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/asm/unistd.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/Data/Dumper/Dumper.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/IO/IO.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/Socket/Socket.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/bits/syscall.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/sys/syscall.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/syscall.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/DynaLoader/dl_findfile.al
-/usr/lib/perl5/PERL_VERSION/lib.pm
-/usr/lib/perl5/PERL_VERSION/overload.pm
-/usr/lib/perl5/PERL_VERSION/strict.pm
-/usr/lib/perl5/PERL_VERSION/vars.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/DataStructure.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/File.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/Func.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/Globals.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/Math.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/String.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/System.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/Various.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/Cmd.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/Config.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/FTP.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/FTP/A.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/FTP/I.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/FTP/dataconn.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/Netrc.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/packdrake.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/Gtk.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/Gtk/Types.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/Gtk/Gdk/ImlibImage.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/auto/Gtk/Gtk.so
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/auto/Gtk/Gdk/ImlibImage/ImlibImage.so
-/usr/lib/rpm/rpmrc
-/usr/lib/rpm/macros
-/sbin/rescuept
-/usr/share/icons/amusement_section.png
-/usr/share/icons/arcade_section.png
-/usr/share/icons/cd_burning_section.png
-/usr/share/icons/chat_section.png
-/usr/share/icons/default_section.png
-/usr/share/icons/documentation_section.png
-/usr/share/icons/gnome.xpm
-/usr/share/icons/graphics_section.png
-/usr/share/icons/kde.xpm
-/usr/share/icons/multimedia_section.png
-/usr/share/icons/development_section.png
-/usr/share/icons/networking_section.png
-/usr/share/icons/mail_section.png
-/usr/share/icons/archiving_section.png
-/usr/share/icons/hardware_section.png
-/usr/share/icons/file_transfer_section.png
-/usr/share/icons/office_section.png
-/usr/share/icons/remote_access_section.png
-/usr/share/icons/sciences_section.png
-/usr/share/icons/video_section.png
-/usr/share/icons/windowmanager_section.png
-/usr/share/icons/editors_section.png
-/usr/share/icons/terminals_section.png
-/usr/share/icons/configuration_section.png
-/usr/share/ldetect-lst/Cards+
-/usr/share/ldetect-lst/CardsNames
-/usr/share/ldetect-lst/MonitorsDB
-/usr/share/ldetect-lst/isdn.db
-/usr/share/ldetect-lst/pcitable
-/usr/share/ldetect-lst/usbtable
-
-/sbin/pvcreate
-/sbin/pvdisplay
-/sbin/vgchange
-/sbin/vgcreate
-/sbin/vgdisplay
-/sbin/vgextend
-/sbin/vgremove
-/sbin/vgscan
-/sbin/lvcreate
-/sbin/lvdisplay
-/sbin/lvextend
-/sbin/lvreduce
-/sbin/lvremove
diff --git a/perl-install/share/list.alpha b/perl-install/share/list.alpha
deleted file mode 100644
index 7ce1a1fee..000000000
--- a/perl-install/share/list.alpha
+++ /dev/null
@@ -1,13 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/raidstart
-/sbin/ifport
-/sbin/mkdosfs
-/usr/X11R6/bin/XF86_FBDev
-/usr/X11R6/bin/XF86_VGA16
-/usr/X11R6/bin/XF86_3DLabs
-/usr/X11R6/bin/XF86_SVGA
-/usr/X11R6/bin/XF86_TGA
-/usr/X11R6/bin/XF86_S3
-/usr/X11R6/bin/XF86_Mach64
-/usr/X11R6/bin/xmodmap
diff --git a/perl-install/share/list.i386 b/perl-install/share/list.i386
deleted file mode 100644
index d7735f29c..000000000
--- a/perl-install/share/list.i386
+++ /dev/null
@@ -1,11 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/mkfs.jfs
-/sbin/mkfs.xfs
-/sbin/raidstart
-/sbin/ifport
-/sbin/mkdosfs
-/sbin/resize_reiserfs
-/usr/X11R6/bin/XF86_FBDev
-/usr/X11R6/bin/XF86_VGA16
-/usr/X11R6/bin/xmodmap
diff --git a/perl-install/share/list.ia64 b/perl-install/share/list.ia64
deleted file mode 100644
index 9bbf999cb..000000000
--- a/perl-install/share/list.ia64
+++ /dev/null
@@ -1,119 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/mkfs.xfs
-/sbin/raidstart
-/sbin/mkdosfs
-/sbin/resize_reiserfs
-/usr/bin/strace
-/var/log/XFree86.0.log
-/usr/X11R6/bin/XFree86
-/usr/X11R6/bin/xmodmap
-/usr/X11R6/lib/modules/
-/usr/X11R6/lib/modules/codeconv
-/usr/X11R6/lib/modules/codeconv/libARABIC.a
-/usr/X11R6/lib/modules/codeconv/libARMSCII8.a
-/usr/X11R6/lib/modules/codeconv/libBIG5.a
-/usr/X11R6/lib/modules/codeconv/libDOSENCODING.a
-/usr/X11R6/lib/modules/codeconv/libGB2312.a
-/usr/X11R6/lib/modules/codeconv/libGEORGIAN.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_1.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_10.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_11.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_14.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_15.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_2.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_3.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_4.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_5.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_6.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_7.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_8.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_9.a
-/usr/X11R6/lib/modules/codeconv/libJISX0201.a
-/usr/X11R6/lib/modules/codeconv/libJISX0208.a
-/usr/X11R6/lib/modules/codeconv/libJISX0212.a
-/usr/X11R6/lib/modules/codeconv/libKOI8.a
-/usr/X11R6/lib/modules/codeconv/libKSC5601.a
-/usr/X11R6/lib/modules/codeconv/libKSCJOHAB.a
-/usr/X11R6/lib/modules/codeconv/libMULEENCODING.a
-/usr/X11R6/lib/modules/codeconv/libTCVN.a
-/usr/X11R6/lib/modules/codeconv/libVISCII.a
-/usr/X11R6/lib/modules/dri
-/usr/X11R6/lib/modules/dri/gamma_dri.so
-/usr/X11R6/lib/modules/dri/i810_dri.so
-/usr/X11R6/lib/modules/dri/mga_dri.so
-/usr/X11R6/lib/modules/dri/r128_dri.so
-/usr/X11R6/lib/modules/dri/sis_dri.so
-/usr/X11R6/lib/modules/drivers
-/usr/X11R6/lib/modules/drivers/ati_drv.o
-/usr/X11R6/lib/modules/drivers/atimisc_drv.o
-/usr/X11R6/lib/modules/drivers/fbdev_drv.o
-/usr/X11R6/lib/modules/drivers/glint_drv.o
-/usr/X11R6/lib/modules/drivers/i740_drv.o
-/usr/X11R6/lib/modules/drivers/linux
-/usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
-/usr/X11R6/lib/modules/drivers/mga_drv.o
-/usr/X11R6/lib/modules/drivers/nv_drv.o
-/usr/X11R6/lib/modules/drivers/r128_drv.o
-/usr/X11R6/lib/modules/drivers/radeon_drv.o
-/usr/X11R6/lib/modules/drivers/rendition_drv.o
-/usr/X11R6/lib/modules/drivers/s3virge_drv.o
-/usr/X11R6/lib/modules/drivers/sis_drv.o
-/usr/X11R6/lib/modules/drivers/tdfx_drv.o
-/usr/X11R6/lib/modules/drivers/vga_drv.o
-/usr/X11R6/lib/modules/extensions
-/usr/X11R6/lib/modules/extensions/libGLcore.a
-/usr/X11R6/lib/modules/extensions/libdbe.a
-/usr/X11R6/lib/modules/extensions/libdri.a
-/usr/X11R6/lib/modules/extensions/libextmod.a
-/usr/X11R6/lib/modules/extensions/libglx.a
-/usr/X11R6/lib/modules/extensions/librecord.a
-/usr/X11R6/lib/modules/extensions/libxie.a
-/usr/X11R6/lib/modules/fonts
-/usr/X11R6/lib/modules/fonts/libbitmap.a
-/usr/X11R6/lib/modules/fonts/libfreetype.a
-/usr/X11R6/lib/modules/fonts/libspeedo.a
-/usr/X11R6/lib/modules/fonts/libtype1.a
-/usr/X11R6/lib/modules/fonts/libxtt.a
-/usr/X11R6/lib/modules/input
-/usr/X11R6/lib/modules/input/citron_drv.o
-/usr/X11R6/lib/modules/input/digitaledge_drv.o
-/usr/X11R6/lib/modules/input/dynapro_drv.o
-/usr/X11R6/lib/modules/input/elographics_drv.o
-/usr/X11R6/lib/modules/input/microtouch_drv.o
-/usr/X11R6/lib/modules/input/mouse_drv.o
-/usr/X11R6/lib/modules/input/mutouch_drv.o
-/usr/X11R6/lib/modules/input/spaceorb_drv.o
-/usr/X11R6/lib/modules/input/summa_drv.o
-/usr/X11R6/lib/modules/input/void_drv.o
-/usr/X11R6/lib/modules/input/wacom_drv.o
-/usr/X11R6/lib/modules/libafb.a
-/usr/X11R6/lib/modules/libcfb.a
-/usr/X11R6/lib/modules/libcfb16.a
-/usr/X11R6/lib/modules/libcfb24.a
-/usr/X11R6/lib/modules/libcfb32.a
-/usr/X11R6/lib/modules/libddc.a
-/usr/X11R6/lib/modules/libfb.a
-/usr/X11R6/lib/modules/libi2c.a
-/usr/X11R6/lib/modules/libint10.a
-/usr/X11R6/lib/modules/libmfb.a
-/usr/X11R6/lib/modules/libpcidata.a
-/usr/X11R6/lib/modules/librac.a
-/usr/X11R6/lib/modules/libramdac.a
-/usr/X11R6/lib/modules/libscanpci.a
-/usr/X11R6/lib/modules/libshadow.a
-/usr/X11R6/lib/modules/libshadowfb.a
-/usr/X11R6/lib/modules/libvbe.a
-/usr/X11R6/lib/modules/libvgahw.a
-/usr/X11R6/lib/modules/libxaa.a
-/usr/X11R6/lib/modules/libxf1bpp.a
-/usr/X11R6/lib/modules/libxf24_32bpp.a
-/usr/X11R6/lib/modules/libxf4bpp.a
-/usr/X11R6/lib/modules/libxf8_16bpp.a
-/usr/X11R6/lib/modules/libxf8_32bpp.a
-/usr/X11R6/lib/modules/linux
-/usr/X11R6/lib/modules/linux/libdrm.a
-/usr/X11R6/lib/modules/linux/libfbdevhw.a
-/usr/X11R6/lib/modules/v10002d.uc
-/usr/X11R6/lib/modules/v20002d.uc
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/asm/break.ph
diff --git a/perl-install/share/list.ppc b/perl-install/share/list.ppc
deleted file mode 100644
index 332c97dc2..000000000
--- a/perl-install/share/list.ppc
+++ /dev/null
@@ -1,15 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/raidstart
-/usr/bin/hformat
-/usr/bin/hmount
-/usr/bin/humount
-/usr/bin/hattrib
-/usr/bin/hcopy
-/usr/bin/hcd
-/sbin/pdisk
-/usr/X11R6/bin/Xpmac
-/usr/X11R6/bin/xmodmap
-/sbin/mkfs.xfs
-/sbin/mkfs.jfs
-
diff --git a/perl-install/share/list.sparc b/perl-install/share/list.sparc
deleted file mode 100644
index b597a10ce..000000000
--- a/perl-install/share/list.sparc
+++ /dev/null
@@ -1,84 +0,0 @@
-/bin/cpio
-/lib/libnss_nis.so.2
-/lib/libnss_files.so.2
-/lib/libnss_dns.so.2
-/lib/libresolv.so.2
-/etc/protocols
-/sbin/mkreiserfs
-/sbin/fdisk
-/sbin/ifport
-/sbin/insmod
-/sbin/mkraid
-/sbin/rmmod
-/sbin/mkdosfs
-/sbin/mke2fs
-/sbin/raidstart
-/sbin/losetup
-/usr/bin/genromfs
-/usr/bin/bzip2
-/usr/bin/perl
-/usr/lib/libimlib-png.so
-/usr/lib/gtk/themes/engines/libpixmap.so
-/usr/lib/gtk/themes/engines/libpixmap.la
-/usr/lib/libimlib-png.so
-/usr/lib/perl5/PERL_VERSION/AutoLoader.pm
-/usr/lib/perl5/PERL_VERSION/Carp.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Data/Dumper.pm
-/usr/lib/perl5/PERL_VERSION/Exporter.pm
-/usr/lib/perl5/PERL_VERSION/Carp/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/Exporter/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/FileHandle.pm
-/usr/lib/perl5/PERL_VERSION/SelectSaver.pm
-/usr/lib/perl5/PERL_VERSION/SelfLoader.pm
-/usr/lib/perl5/PERL_VERSION/Symbol.pm
-/usr/lib/perl5/PERL_VERSION/Time/Local.pm
-/usr/lib/perl5/PERL_VERSION/dumpvar.pl
-/usr/lib/perl5/PERL_VERSION/warnings.pm
-/usr/lib/perl5/PERL_VERSION/warnings/register.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/File/Glob.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/File/Glob/Glob.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/File/Glob/Glob.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Config.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/XSLoader.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/DynaLoader.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Fcntl.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Fcntl/Fcntl.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Fcntl/Fcntl.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/File.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/Handle.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/Seekable.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/Socket.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Socket.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/_h2ph_pre.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/asm/unistd.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/asm-sparc/unistd.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/asm-sparc64/unistd.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Data/Dumper/Dumper.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Data/Dumper/Dumper.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/IO/IO.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Socket/Socket.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Socket/Socket.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/bits/syscall.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/sys/syscall.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/syscall.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/DynaLoader/dl_findfile.al
-/usr/lib/perl5/PERL_VERSION/lib.pm
-/usr/lib/perl5/PERL_VERSION/overload.pm
-/usr/lib/perl5/PERL_VERSION/strict.pm
-/usr/lib/perl5/PERL_VERSION/vars.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Gtk.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Gtk/Types.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/Cmd.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/Config.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP/A.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP/I.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP/dataconn.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/Netrc.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/auto/Gtk/Gtk.bs
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/auto/Gtk/Gtk.so
-/usr/lib/rpm/rpmrc
-/usr/X11R6/bin/Xsun24
-/usr/X11R6/bin/XF86_Mach64
-/usr/X11R6/bin/XF86_3DLabs
-/usr/X11R6/bin/xmodmap
diff --git a/perl-install/share/locales-skeleton.tar.bz2 b/perl-install/share/locales-skeleton.tar.bz2
deleted file mode 100644
index 113f3300a..000000000
--- a/perl-install/share/locales-skeleton.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/logo-mandrake.png b/perl-install/share/logo-mandrake.png
deleted file mode 100644
index 5b754bef3..000000000
--- a/perl-install/share/logo-mandrake.png
+++ /dev/null
diff --git a/perl-install/share/makedev.sh b/perl-install/share/makedev.sh
deleted file mode 100755
index e9dccaff2..000000000
--- a/perl-install/share/makedev.sh
+++ /dev/null
@@ -1,89 +0,0 @@
-#!/bin/sh
-#
-# $Id$
-#
-# This script creates all ISDN devices under /dev .
-# Many/most distributions don't include these devices.
-
-echo -e "Creating device inodes ... \c"
-
-if [ $# = 1 ] ; then
-	DEV=$1/dev
-else
-	DEV=/dev
-fi
-
-MAJ=45
-MIN=0
-rm -f $DEV/isdnctrl* $DEV/ippp*
-while [ $MIN -lt 64 ] ; do
-	mknod -m 600 $DEV/isdn$MIN c $MAJ $MIN
-	mknod -m 660 $DEV/isdnctrl$MIN c $MAJ `expr $MIN + 64`
-	mknod -m 600 $DEV/ippp$MIN c $MAJ `expr $MIN + 128`
-	MIN=`expr $MIN + 1`
-done
-if   grep '^pppusers:' /etc/group > /dev/null
-then	# RH 5 standard
-	chgrp pppusers $DEV/isdnctrl* $DEV/ippp*
-elif grep '^dialout:' /etc/group > /dev/null
-then	# Debian/SuSE standard
-	chgrp dialout $DEV/isdnctrl* $DEV/ippp*
-fi
-rm -f $DEV/isdninfo
-mknod -m 444 $DEV/isdninfo c $MAJ 255
-ln -sf $DEV/isdnctrl0 $DEV/isdnctrl
-
-MAJ=43
-MIN=0
-rm -f $DEV/ttyI*
-while [ $MIN -lt 64 ] ; do
-	mknod -m 666 $DEV/ttyI$MIN c $MAJ $MIN
-	MIN=`expr $MIN + 1`
-done
-
-MAJ=44
-MIN=0
-rm -f $DEV/cui*
-while [ $MIN -lt 64 ] ; do
-	mknod -m 666 $DEV/cui$MIN c $MAJ $MIN
-	MIN=`expr $MIN + 1`
-done
-
-if grep '^dialout:' /etc/group > /dev/null
-then	# Debian/SuSE standard
-	chgrp dialout $DEV/ttyI* $DEV/cui*
-fi
-
-MAJ=68
-MIN=0
-rm -f $DEV/capi20*
-mknod -m 666 $DEV/capi20 c $MAJ 0
-mknod -m 666 $DEV/capi20.00 c $MAJ 1
-mknod -m 666 $DEV/capi20.01 c $MAJ 2
-mknod -m 666 $DEV/capi20.02 c $MAJ 3
-mknod -m 666 $DEV/capi20.03 c $MAJ 4
-mknod -m 666 $DEV/capi20.04 c $MAJ 5
-mknod -m 666 $DEV/capi20.05 c $MAJ 6
-mknod -m 666 $DEV/capi20.06 c $MAJ 7
-mknod -m 666 $DEV/capi20.07 c $MAJ 8
-mknod -m 666 $DEV/capi20.08 c $MAJ 9
-mknod -m 666 $DEV/capi20.09 c $MAJ 10
-mknod -m 666 $DEV/capi20.10 c $MAJ 11
-mknod -m 666 $DEV/capi20.11 c $MAJ 12
-mknod -m 666 $DEV/capi20.12 c $MAJ 13
-mknod -m 666 $DEV/capi20.13 c $MAJ 14
-mknod -m 666 $DEV/capi20.14 c $MAJ 15
-mknod -m 666 $DEV/capi20.15 c $MAJ 16
-mknod -m 666 $DEV/capi20.16 c $MAJ 17
-mknod -m 666 $DEV/capi20.17 c $MAJ 18
-mknod -m 666 $DEV/capi20.18 c $MAJ 19
-mknod -m 666 $DEV/capi20.19 c $MAJ 20
-
-if grep '^dialout:' /etc/group > /dev/null
-then	# Debian/SuSE standard
-	chgrp dialout $DEV/capi20 $DEV/capi20.??
-fi
-rm -f $DEV/isdnctrl
-ln -s $DEV/isdnctrl1 $DEV/isdnctrl
-
-echo "done."
diff --git a/perl-install/share/po/Changelog b/perl-install/share/po/Changelog
deleted file mode 100644
index fcb677e9a..000000000
--- a/perl-install/share/po/Changelog
+++ /dev/null
@@ -1,249 +0,0 @@
-2002-05-14  Arkadiusz Lipiec <alipiec@elka.pw.edu.pl>
-	* pl.po: finished translation and corrected many entries
-
-2001-03-14  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* i18n_compssUsers: improved the script to not include path=
-	lines
-
-2000-10-03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* fr.po: fixed bug #518 and fixed other misc errors
-
-2000-09-16  Pixel  <pixel@mandrakesoft.com>
-	* de.po: fix translation of "Size: %d KB\n" (was MB instead of KB)	
-
-2000-04-28  Stefan Siegel <siegel@linux-mandrake.com>
-	* de.po: Update German File
-
-2000-04-18  Pablo Saratxaga <pablo@mandrakesoft.com>
-	
-	* cy.po: There is now a Welsh file, Thanks Dafydd !
-	* da.po: Updated Danish file
-
-2000-04-04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lv.po: Added Latvian file; now we are the very first to have
-	Latvian language :)
-
-2000-03-26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* sk.po: Slovakian translation is now mantained and updated
-
-2000-01-10  Pixel  <pixel@mandrakesoft.com>
-
-	* po/Changelog: remove the paragraph which was removed from
-	help.pm in br.po cs.po el.po et.po gl.po ro.po ru.po tr.po
-
-2000-01-06 Fran�ois PONS <fpons@mandrakesoft.com>
-	* it.po: updated by Maurizio.
-
-2000-01-06 David BAUDENS <baudens@mandrakesoft.com>
-	* fr.po: updated
-
-2000-01-05  Pixel  <pixel@mandrakesoft.com>
-	* *.po: changed the crypto message (french address in usa, and
-	removed a paragraph)
-
-2000-01-03  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* *.po: merged some strigns from gnorpm to help transaltiosn fo
-	rpmdrake new strings
-
-2000-01-03  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: updated Norwegian file
-	* id.po: updated Indonesian file
-	* hr.po: updated Croatian file
-	* da.po: updated Danish file
-	* et.po: updated Estonian file
-
-2000-01-01  Pablo Saratxaga <pablo@mandrakesoft.com>
-	Happy New Year to all !
-	* es.po: completed Spanish file
-	* zh_CN.po: created a GB2312 version by converting the Big5 one
-	however a real mantainer for a GB2312 version is still wanted
-	* ca.po: the first one to be updated after Y2K :)
-
-1999-12-30  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* zh_TW.Big5.po: uddated chinese file
-	* it.po: updated the Italian file
-	* es.po: completed spanish file
-	* br.po: updated Britton file
-	* ja.po: updated Japanese file
-
-1999-12-29  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: completed Norwegian file
-	* eo.po: Completed esperanto file
-	* sv.po: updated Swedish file
-	* hu.po: compelted Hungarian file
-
-1999-12-27  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* ru.po: updated Russian file
-	* id.po: completed Indonesian file
-	* et.po: Estonian files fixes
-	* no.po: completed file
-	* et.po: completed file
-	* lt.po: updated Lithuanian file
-	* da.po: completed Danish file
-	* ja.po: updated Japanese file
-
-1999-12-24  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* lt.po: updated Lithuanian file
-	* *.po: new strings have been added...
-
-1999-12-23  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* eo.po: completed esperanto file
-	* hr.po: updated Croatian file
-	* zh_TW.Big5: updated chinese file
-	* id.po: completed Indonesian file
-	* et.po: completed Estonian file
-	* sv.po: updated swedish file
-	* da.po: completed Danish file
-	* bg.po: updated Bulgarian file
-	* sr.po: updated serbian file
-	* no.po: completed norwegian file
-
-1999-12-22  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* de.po: update from Stefan Siegel <siegel@informatik.uni-kl.de>
-	* bg.po: updated Bulgarian file
-
-1999-12-16  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* *.po: updated po files
-	* ja.po: added japanese file
-
-1999-12-12  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* pt_BR.po: added portuguese file from Andrei <andreib@zaz.com.br>
-
-1999-12-10  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* et.po: completed 100% the Estonian file
-
-1999-12-09  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* th.po: Thai file from Kan Yuenyong <kan@kaiwal.com>
-
-1999-12-07  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* ro.po: did 'ispell -d romanian ro.po', I hope that improves the
-	lack of 8 bit letters; but a real mantainer is needed.
-
-1999-12-02  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po, ca.po, no.po, id.po: Completed Spanish, Catalan,
-	Norwegian and Indonesian language files.
-	* hu.po: Update of Hungarian file (60% done)
-
-1999-11-30  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* hu.po: added Hungarian language file
-
-1999-11-26  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: updated Norwegian file
-	* ca.po: added beginnign of Catalan file from SoftCatal�
-
-1999-11-25  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* *.po: corrected a typo ( s/Size: %d/Size: %s/ )
-	* de.po: updated German file
-	* id.po: updated Indonesian file
-
-1999-11-24  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* bg.po: added Bulgarian file from Elena Rad�va <ely@triada.bg>
-
-1999-11-19  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* uk.po: added Ukrainian file
-	* pl.po: Polish is now 100% complete!
-
-1999-11-18  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* et.po: added estonian from Riho Kurg <riho@aso.ee>
-	* pl.po: updated polish from Pawel Jablonski
-
-1999-11-16  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* update-po, lots of new strings :)
-	* es.po: updated & completed
-
-1999-11-10  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po: completed
-	* pl.po: updated from Pavel Jablonski
-
-1999-11-08  Fran�ois PONS <fpons@mandrakesoft.com>
-	* fr.po: updated.
-
-1999-11-05  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* pl.po: added Polish language file
-	* ru.po: updated russian file
-	* no.po: completed norwegian file
-
-1999-11-04  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po: updated and completed spanish language file
-	* wa.po: updated walon language file
-
-1999-10-30  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po: updated spanish language file
-
-1999-10-22  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* it.po, es.po: uopdated spanish and italian language files
-
-1999-10-22  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: update of the Nowegian translation by Terje Bjerkelia
-
-1999-10-22  Pixel  <pixel@linux-mandrake.com>
-	* es.po: some corrections by Camille <camille@mandrakesoft.com>
-
-1999-10-21  Fran�ois PONS <fpons@mandrakesoft.com>
-	* fr.po: modified printer or queue translation (line 1950 and 2778)
-
-1999-10-21  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po: updated Spanish language file
-
-1999-10-20  Fran�ois PONS <fpons@mandrakesoft.com>
-	* fr.po: corrected "Skip PCMCIA probing" message with new msgid
-
-1999-10-14  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* ru.po: new Russian translations from Aleksey Smirnov
-	* no.po: update of the Nowegian translation by Terje Bjerkelia
-
-1999-10-13  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* *.po: checked that the name is correctly DrakX now, and updated them
-	* tr.po: newer translations from Hakan Terzio�lu <hakan@gelecek.com.tr>
-
-1999-10-11  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po,es.po: updated Norwegian and Spanish language files
-
-1999-09-30  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po: updated Spanish language file
-
-1999-09-26  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: updated norwegian file
-
-1999-09-25  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* it.po: updated italian file
-
-1999-09-19  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: update Norwegian language file
-
-1999-09-18  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* tr.po: Added Turkish language file from
-	Hakan Terzio�lu <hakan@gelecek.com.tr>
-	* it.po: updated italian file
-
-1999-09-13  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* it.po: added italian language file from
-	"Paolo Lorenzin" <pasusu@tin.it>
-
-1999-09-08  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* id.po, es.po: completed files
-
-1999-08-26  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* fr.po: updated fr.po from gregus@linux-mandrake.com (Gr�goire Colbert)
-	who is now in charge of the French translation
-
-1999-08-25  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* Makefile: corrected the msgmerge update (translations were
-	being deleted !). make it so DrakX.pot has a header
-	* *.po: get back all *.po files to the latest version including
-	translated strings. add headers
-	* id.po: update from indonesian team
-
-1999-08-22  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: added norwegian translations from
-	Terje Bjerkelia <terje@bjerkelia.com>
-
-1999-08-18  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* Changelog: created a Changelog file
-	* id.po: added indonesian translations from
-          Mohammad DAMT <mdamt@cakraweb.com>
-
diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot
deleted file mode 100644
index e1495dcf3..000000000
--- a/perl-install/share/po/DrakX.pot
+++ /dev/null
@@ -1,10173 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2002-06-13 15:54+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:244
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:247
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "Multi-head configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:251
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Graphics card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:263
-msgid "Select a graphics card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "Choose a X server"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "X server"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:294
-msgid "Choose a X driver"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:294
-msgid "X driver"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:361 ../../Xconfigurator.pm_.c:367
-#: ../../Xconfigurator.pm_.c:417 ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Which configuration of XFree do you want to have?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:375
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:377 ../../Xconfigurator.pm_.c:410
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:379 ../../Xconfigurator.pm_.c:412
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:387 ../../Xconfigurator.pm_.c:401
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:389 ../../Xconfigurator.pm_.c:403
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:398
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:418
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:422
-msgid "XFree configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:497
-msgid "Select the memory size of your graphics card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Choose options for server"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Choose a monitor"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Monitor"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:578
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Horizontal refresh rate"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:586
-msgid "Vertical refresh rate"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:623
-msgid "Monitor not configured"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:626
-msgid "Graphics card not configured yet"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:629
-msgid "Resolutions not chosen yet"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:647
-msgid "Do you want to test the configuration?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:651
-msgid "Warning: testing this graphics card may freeze your computer"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:654
-msgid "Test of the configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid "An error occurred:"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:745
-msgid "Is this the correct setting?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:754
-msgid "An error occurred, try to change some parameters"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:825
-msgid "Resolution"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:877
-msgid "Choose the resolution and the color depth"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:879
-#, c-format
-msgid "Graphics card: %s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:880
-#, c-format
-msgid "XFree86 server: %s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:894 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:894 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:701
-#: ../../my_gtk.pm_.c:1034 ../../my_gtk.pm_.c:1056
-#: ../../standalone/drakbackup_.c:2288 ../../standalone/drakbackup_.c:2359
-#: ../../standalone/drakbackup_.c:2375
-msgid "Ok"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:896 ../../network/netconnect.pm_.c:173
-#: ../../printerdrake.pm_.c:2473 ../../standalone/drakfloppy_.c:146
-#: ../../standalone/draknet_.c:275 ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:897
-msgid "Show all"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:942
-msgid "Resolutions"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Monitor: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1518
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Graphics card identification: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "Color depth: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "Resolution: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1525
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1526
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1544
-msgid "Preparing X-Window configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1564
-msgid "What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1569
-msgid "Change Monitor"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Graphics card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Change Server options"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1574
-msgid "Change Resolution"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1575
-msgid "Show information"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1576
-msgid "Test again"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1577 ../../printerdrake.pm_.c:2476
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1585
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1606
-msgid "Graphical interface at startup"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1607
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1613
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1628
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr ""
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr ""
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr ""
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr ""
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr ""
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr ""
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr ""
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr ""
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr ""
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr ""
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr ""
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr ""
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr ""
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr ""
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr ""
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr ""
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1087 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:710 ../../printerdrake.pm_.c:808
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr ""
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1088
-msgid "Password (again)"
-msgstr ""
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr ""
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr ""
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr ""
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr ""
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr ""
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1143
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "Please try again"
-msgstr ""
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "The passwords do not match"
-msgstr ""
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr ""
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:741
-#: ../../standalone/drakbackup_.c:850 ../../standalone/drakfont_.c:790
-#: ../../standalone/drakfont_.c:827
-msgid "Add"
-msgstr ""
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr ""
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr ""
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr ""
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:884
-msgid "Linux"
-msgstr ""
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr ""
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr ""
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr ""
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr ""
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr ""
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr ""
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr ""
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr ""
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr ""
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr ""
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr ""
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr ""
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr ""
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr ""
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr ""
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr ""
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr ""
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr ""
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr ""
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr ""
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "No"
-msgstr ""
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "Yes"
-msgstr ""
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr ""
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr ""
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr ""
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr ""
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr ""
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr ""
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr ""
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr ""
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr ""
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr ""
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr ""
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr ""
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr ""
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr ""
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:709
-#: ../../printerdrake.pm_.c:807
-msgid "User name"
-msgstr ""
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr ""
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr ""
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr ""
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr ""
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr ""
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr ""
-
-#: ../../any.pm_.c:851
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-
-#: ../../any.pm_.c:865 ../../install_steps_interactive.pm_.c:689
-#: ../../standalone/drakxtv_.c:78
-msgid "All"
-msgstr ""
-
-#: ../../any.pm_.c:957
-msgid "Allow all users"
-msgstr ""
-
-#: ../../any.pm_.c:957
-msgid "Custom"
-msgstr ""
-
-#: ../../any.pm_.c:957
-msgid "No sharing"
-msgstr ""
-
-#: ../../any.pm_.c:967 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-
-#: ../../any.pm_.c:970
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-
-#: ../../any.pm_.c:978 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:984
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:998 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:564
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:702 ../../my_gtk.pm_.c:705 ../../my_gtk.pm_.c:1034
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1588
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2254
-#: ../../standalone/drakbackup_.c:2279 ../../standalone/drakbackup_.c:2300
-#: ../../standalone/drakbackup_.c:2321 ../../standalone/drakbackup_.c:2339
-#: ../../standalone/drakbackup_.c:2387 ../../standalone/drakbackup_.c:2407
-#: ../../standalone/drakbackup_.c:2426 ../../standalone/drakfloppy_.c:235
-#: ../../standalone/drakfloppy_.c:384 ../../standalone/drakfont_.c:768
-#: ../../standalone/drakgw_.c:598 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:527
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:1000
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1037
-msgid "Welcome To Crackers"
-msgstr ""
-
-#: ../../any.pm_.c:1038
-msgid "Poor"
-msgstr ""
-
-#: ../../any.pm_.c:1039 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../any.pm_.c:1040
-msgid "High"
-msgstr ""
-
-#: ../../any.pm_.c:1041
-msgid "Higher"
-msgstr ""
-
-#: ../../any.pm_.c:1042
-msgid "Paranoid"
-msgstr ""
-
-#: ../../any.pm_.c:1045
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../any.pm_.c:1048
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-
-#: ../../any.pm_.c:1050
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1051
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-
-#: ../../any.pm_.c:1054
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-
-#: ../../any.pm_.c:1059
-msgid "Please choose the desired security level."
-msgstr ""
-
-#: ../../any.pm_.c:1062
-msgid "Security level"
-msgstr ""
-
-#: ../../any.pm_.c:1064
-msgid "Use libsafe for servers"
-msgstr ""
-
-#: ../../any.pm_.c:1065
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../any.pm_.c:1067
-msgid "Security user (login or email)"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:354
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:910
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:913
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:916
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:919
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:922
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-
-#: ../../bootloader.pm_.c:926
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1026
-msgid "Desktop"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1028
-msgid "Start Menu"
-msgstr ""
-
-#: ../../bootloader.pm_.c:1047
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr ""
-
-#: ../../bootlook.pm_.c:79 ../../standalone/drakfloppy_.c:82
-#: ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1457
-#: ../../standalone/drakbackup_.c:1468 ../../standalone/drakgw_.c:592
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr ""
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the graphical environment when your system starts"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2431 ../../standalone/drakbackup_.c:3335
-#: ../../standalone/drakfloppy_.c:377 ../../standalone/drakfont_.c:537
-#: ../../standalone/drakfont_.c:658 ../../standalone/drakfont_.c:721
-#: ../../standalone/drakfont_.c:766 ../../standalone/draknet_.c:109
-#: ../../standalone/draknet_.c:141 ../../standalone/draknet_.c:297
-#: ../../standalone/draknet_.c:436 ../../standalone/draknet_.c:522
-#: ../../standalone/draknet_.c:565 ../../standalone/draknet_.c:666
-#: ../../standalone/logdrake_.c:520
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr ""
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr ""
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr ""
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../network/tools.pm_.c:113
-msgid "France"
-msgstr ""
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27 ../../network/tools.pm_.c:116
-msgid "Belgium"
-msgstr ""
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr ""
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr ""
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr ""
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr ""
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34 ../../network/tools.pm_.c:114
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../network/tools.pm_.c:115
-#: ../../standalone/drakxtv_.c:74
-msgid "Italy"
-msgstr ""
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr ""
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67 ../../network/tools.pm_.c:117
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:899
-#: ../../diskdrake/interactive.pm_.c:908 ../../diskdrake/interactive.pm_.c:962
-msgid "Read carefully!"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1058
-msgid "Empty"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:933
-msgid "Other"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:535
-#: ../../diskdrake/interactive.pm_.c:562 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:629
-msgid "Resize"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:682
-msgid "Move"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:781
-msgid "Size in MB: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:782
-msgid "Filesystem type: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1042
-#: ../../diskdrake/interactive.pm_.c:1116
-msgid "Mount point: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:533
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:534 ../../diskdrake/interactive.pm_.c:561
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:540
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:585
-msgid "Computing FAT filesystem bounds"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:585 ../../diskdrake/interactive.pm_.c:644
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:617
-msgid "This partition is not resizeable"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "All data on this partition should be backed-up"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:624
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:629
-msgid "Choose the new size"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:630
-msgid "New size in MB: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:683
-msgid "Which disk do you want to move it to?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:684
-msgid "Sector"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:685
-msgid "Which sector do you want to move it to?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving partition..."
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:705
-msgid "Choose an existing RAID to add to"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:706 ../../diskdrake/interactive.pm_.c:724
-msgid "new"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:722
-msgid "Choose an existing LVM to add to"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:727
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:767
-msgid "This partition can't be used for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:779
-msgid "Loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "Loopback file name: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:785
-msgid "Give a file name"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:788
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:789
-msgid "File already exists. Use it?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:812
-msgid "Mount options"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:819
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:882 ../../standalone/drakfloppy_.c:104
-msgid "device"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:883
-msgid "level"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:884
-msgid "chunk size"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:899
-msgid "Be careful: this operation is dangerous."
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:914
-msgid "What type of partitioning?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:932
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:936
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:942
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:962
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:966
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:977
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:979
-msgid "Formatting"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:980
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:981
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:992
-msgid "Hide files"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:992
-msgid "Move files to the new partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:993
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-msgid "Moving files to the new partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1008
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1012
-#, c-format
-msgid "Removing %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1022
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1043
-#: ../../diskdrake/interactive.pm_.c:1102
-msgid "Device: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1044
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1056
-#: ../../diskdrake/interactive.pm_.c:1120
-msgid "Type: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1052
-msgid "Name: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1060
-#, c-format
-msgid "Start: sector %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "Size: %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ", %s sectors"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1065
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1066
-msgid "Formatted\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1067
-msgid "Not formatted\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1068
-msgid "Mounted\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1069
-#, c-format
-msgid "RAID md%s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1071
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1072
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1074
-#, c-format
-msgid "Level %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1075
-#, c-format
-msgid "Chunk size %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1078
-#, c-format
-msgid "Loopback file name: %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1081
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1084
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1103
-#, c-format
-msgid "Size: %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1104
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1105
-msgid "Info: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1106
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1107
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1108
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1122
-#, c-format
-msgid "Options: %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1142
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1143
-msgid "The encryption keys do not match"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1146
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1147
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr ""
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a medium"
-msgstr ""
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr ""
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr ""
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr ""
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr ""
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr ""
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr ""
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:794
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:798
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:810
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:832 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:136
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for Windows on"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partition to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr ""
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr ""
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:675
-msgid "Package Group Selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:690
-msgid "Individual package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:615
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:525
-msgid "Choose the packages you want to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:757
-msgid "Installing"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation..."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-msgid "Refuse"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:782
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:794
-#: ../../install_steps_interactive.pm_.c:798
-msgid "Go on anyway?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:794
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:798
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1017
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "No partition available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:538
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:541
-msgid "Load from floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Loading from floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:548
-msgid "Insert a floppy containing package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:560
-msgid "Save on floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:628
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:641
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:642
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:645
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:647
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:648
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:732
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:737
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:757
-msgid "Preparing installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:766
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:812
-msgid "Post-install configuration"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:818
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:824
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:844
-msgid ""
-"You now have the opportunity to download encryption software.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:883
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been released after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:898
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:903
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Which is your timezone?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:944
-msgid "Hardware clock set to GMT"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:945
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:952
-msgid "NTP Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:986
-#: ../../install_steps_interactive.pm_.c:994
-msgid "Remote CUPS server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:987
-msgid "No printer"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1004
-msgid "Do you have an ISA sound card?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1006
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1008
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1013 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1016
-msgid "Mouse"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1018
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1019 ../../printerdrake.pm_.c:2279
-#: ../../printerdrake.pm_.c:2357
-msgid "Printer"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1021
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1024
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1028
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1066
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1094
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1067
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1103
-msgid "NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1068
-#: ../../install_steps_interactive.pm_.c:1090
-msgid "Local files"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1077
-#: ../../install_steps_interactive.pm_.c:1078 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1079
-msgid "No password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1090 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1098
-msgid "Authentication LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1099
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1100
-msgid "LDAP Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1106
-msgid "Authentication NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "NIS Domain"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1108
-msgid "NIS Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1143
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1159
-msgid "First floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid "Second floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1161 ../../printerdrake.pm_.c:1851
-msgid "Skip"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1166
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1180
-msgid "Sorry, no floppy drive available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1184
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1188
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1191
-msgid "Creating bootdisk..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1198
-msgid "Preparing bootloader..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1209
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1215
-msgid "Do you want to use aboot?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1218
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1225
-msgid "Installing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1231
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1239
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1283
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1287
-msgid "Creating auto install floppy..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1298
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1309
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid "Generate auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1328
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Automated"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Replay"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1336
-msgid "Save packages selection"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr ""
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button?"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:103
-msgid " enter `void' for void entry"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:197 ../../keyboard.pm_.c:228
-msgid "Czech (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198 ../../keyboard.pm_.c:230
-msgid "German"
-msgstr ""
-
-#: ../../keyboard.pm_.c:199
-msgid "Dvorak"
-msgstr ""
-
-#: ../../keyboard.pm_.c:200 ../../keyboard.pm_.c:237
-msgid "Spanish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:201 ../../keyboard.pm_.c:238
-msgid "Finnish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:202 ../../keyboard.pm_.c:239
-msgid "French"
-msgstr ""
-
-#: ../../keyboard.pm_.c:203 ../../keyboard.pm_.c:264
-msgid "Norwegian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:204
-msgid "Polish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:205 ../../keyboard.pm_.c:272
-msgid "Russian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:207 ../../keyboard.pm_.c:274
-msgid "Swedish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:208 ../../keyboard.pm_.c:289
-msgid "UK keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:209 ../../keyboard.pm_.c:290
-msgid "US keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:211
-msgid "Albanian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:212
-msgid "Armenian (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:213
-msgid "Armenian (typewriter)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:214
-msgid "Armenian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:219
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:221
-msgid "Belgian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:222
-msgid "Bulgarian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:223
-msgid "Bulgarian (BDS)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:224
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:225
-msgid "Belarusian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:226
-msgid "Swiss (German layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:227
-msgid "Swiss (French layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:229
-msgid "Czech (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:231
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:232
-msgid "Danish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:233
-msgid "Dvorak (US)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:234
-msgid "Dvorak (Norwegian)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:235
-msgid "Dvorak (Swedish)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:236
-msgid "Estonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:240
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:241
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:242
-msgid "Greek"
-msgstr ""
-
-#: ../../keyboard.pm_.c:243
-msgid "Hungarian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:244
-msgid "Croatian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:245
-msgid "Israeli"
-msgstr ""
-
-#: ../../keyboard.pm_.c:246
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:247
-msgid "Iranian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:248
-msgid "Icelandic"
-msgstr ""
-
-#: ../../keyboard.pm_.c:249
-msgid "Italian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:251
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:254
-msgid "Korean keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:255
-msgid "Latin American"
-msgstr ""
-
-#: ../../keyboard.pm_.c:256
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:258
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:259
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:260
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:261
-msgid "Latvian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:262
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:263
-msgid "Dutch"
-msgstr ""
-
-#: ../../keyboard.pm_.c:265
-msgid "Polish (qwerty layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:266
-msgid "Polish (qwertz layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:267
-msgid "Portuguese"
-msgstr ""
-
-#: ../../keyboard.pm_.c:268
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:270
-msgid "Romanian (qwertz)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:271
-msgid "Romanian (qwerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:273
-msgid "Russian (Yawerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:275
-msgid "Slovenian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:276
-msgid "Slovakian (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:277
-msgid "Slovakian (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Serbian (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "Tamil"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Thai keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "Tajik keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:288
-msgid "Ukrainian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:291
-msgid "US keyboard (international)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:292
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:293
-msgid "Yugoslavian (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:301
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:302
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:303
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:304
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:305
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:306
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:307
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:308
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:309
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:832
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr ""
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr ""
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr ""
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr ""
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr ""
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr ""
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr ""
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr ""
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr ""
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr ""
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr ""
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr ""
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr ""
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:666
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:701
-msgid "Finish"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:701 ../../printerdrake.pm_.c:1590
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:702 ../../printerdrake.pm_.c:1588
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1034
-msgid "Is this correct?"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1098 ../../services.pm_.c:222
-msgid "Info"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1119
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1120
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1121
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:248
-msgid "Choose the network interface"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:364
-msgid "Configuring network"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:369
-msgid "Host name"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:179
-#: ../../network/netconnect.pm_.c:206 ../../network/netconnect.pm_.c:229
-#: ../../network/netconnect.pm_.c:237
-msgid "Network Configuration Wizard"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr ""
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr ""
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:256
-#: ../../network/netconnect.pm_.c:276 ../../network/tools.pm_.c:63
-msgid "Network Configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:171
-msgid "Choose the profile to configure"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:172
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:179 ../../printerdrake.pm_.c:145
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "Normal modem connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, c-format
-msgid "detected on port %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-msgid "ISDN connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-msgid "ADSL connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-msgid "Cable connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-msgid "cable connection detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "LAN connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:206
-msgid "Choose the connection you want to configure"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:230
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:231
-msgid "Internet connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:237
-msgid "Do you want to start the connection at boot?"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:251
-msgid "Network configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:256
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:270
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:271
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:293
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:298
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network/network.pm_.c:308 ../../network/network.pm_.c:309
-#, c-format
-msgid "Configuring network device %s"
-msgstr ""
-
-#: ../../network/network.pm_.c:309
-#, c-format
-msgid " (driver %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:311 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr ""
-
-#: ../../network/network.pm_.c:312 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr ""
-
-#: ../../network/network.pm_.c:313
-msgid "(bootp/dhcp)"
-msgstr ""
-
-#: ../../network/network.pm_.c:313
-msgid "Automatic IP"
-msgstr ""
-
-#: ../../network/network.pm_.c:314
-msgid "Start at boot"
-msgstr ""
-
-#: ../../network/network.pm_.c:335 ../../printerdrake.pm_.c:714
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network/network.pm_.c:365
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network/network.pm_.c:370
-msgid "DNS server"
-msgstr ""
-
-#: ../../network/network.pm_.c:371
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:373
-msgid "Gateway device"
-msgstr ""
-
-#: ../../network/network.pm_.c:385
-msgid "Proxies configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:386
-msgid "HTTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "FTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:388
-msgid "Track network card id (useful for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:391
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network/network.pm_.c:392
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:41
-msgid "Internet configuration"
-msgstr ""
-
-#: ../../network/tools.pm_.c:42
-msgid "Do you want to try to connect to the Internet now?"
-msgstr ""
-
-#: ../../network/tools.pm_.c:46 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:56
-msgid "The system is now connected to Internet."
-msgstr ""
-
-#: ../../network/tools.pm_.c:57
-msgid "For security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:58
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: ../../network/tools.pm_.c:82
-msgid "Connection Configuration"
-msgstr ""
-
-#: ../../network/tools.pm_.c:83
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr ""
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:95
-msgid "Choose your country"
-msgstr ""
-
-#: ../../network/tools.pm_.c:96 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../network/tools.pm_.c:97 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr ""
-
-#: ../../network/tools.pm_.c:98 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:99 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:100 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr ""
-
-#: ../../network/tools.pm_.c:118
-msgid "United Kingdom"
-msgstr ""
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr ""
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr ""
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr ""
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr ""
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr ""
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr ""
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr ""
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr ""
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr ""
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:736
-msgid "Printer on remote lpd server"
-msgstr ""
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr ""
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr ""
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr ""
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:740
-msgid "Enter a printer device URI"
-msgstr ""
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2733
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr ""
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr ""
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ""
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1138
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr ""
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2394
-#: ../../printerdrake.pm_.c:2405 ../../printerdrake.pm_.c:2621
-#: ../../printerdrake.pm_.c:2673 ../../printerdrake.pm_.c:2700
-#: ../../printerdrake.pm_.c:2870 ../../printerdrake.pm_.c:2872
-msgid " (Default)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2457
-msgid "CUPS configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2458
-msgid "Specify CUPS server"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:864
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:857
-msgid "Port"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2440
-#: ../../printerdrake.pm_.c:2559
-msgid "Add a new printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, LaserJet "
-"1100/1200/1220/3200/3300 with scanner), an HP PhotoSmart P100 or 1315 or an "
-"HP LaserJet 2200?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:484
-msgid "Installing HPOJ package..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:489
-msgid "Checking device and configuring HPOJ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:507
-msgid "Installing SANE package..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:519
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:536
-msgid "Making printer port available for CUPS..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:546 ../../printerdrake.pm_.c:1020
-#: ../../printerdrake.pm_.c:1134
-msgid "Reading printer database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:627
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:628
-msgid "Remote host name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:629
-msgid "Remote printer name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:632
-msgid "Remote host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:636
-msgid "Remote printer name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:705
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:706
-msgid "SMB server host"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:707
-msgid "SMB server IP"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:708
-msgid "Share name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:711
-msgid "Workgroup"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:718
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:722
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:727
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:728
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:738
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:741
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-msgid "NetWare Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:804
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:805
-msgid "Printer Server"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:806
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:811
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:815
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-msgid "TCP/Socket Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:855
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:856
-msgid "Printer host name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:860
-msgid "Printer host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:889 ../../printerdrake.pm_.c:891
-msgid "Printer Device URI"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:890
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:905
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1006
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Name of printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1008
-msgid "Description"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1009
-msgid "Location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1023
-msgid "Preparing printer database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1114
-msgid "Your printer model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1115
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1120 ../../printerdrake.pm_.c:1123
-msgid "The model is correct"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1121 ../../printerdrake.pm_.c:1122
-#: ../../printerdrake.pm_.c:1125
-msgid "Select model manually"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1141
-msgid "Printer model selection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1142
-msgid "Which printer model do you have?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1143
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1146
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1222
-msgid "OKI winprinter configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1223
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1266 ../../printerdrake.pm_.c:1293
-msgid "Lexmark inkjet configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1267
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1294
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1510
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1519
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1523
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1528
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1567
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1585
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1589
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Print"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1592
-msgid "Standard test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1595
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Alternative test page (A4)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1600
-msgid "Photo test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1604
-msgid "Do not print any test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1749
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1637
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1641
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1669 ../../printerdrake.pm_.c:2735
-msgid "Raw printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1689
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1692 ../../printerdrake.pm_.c:1708
-#: ../../printerdrake.pm_.c:1718
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1695 ../../printerdrake.pm_.c:1734
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1698
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1705 ../../printerdrake.pm_.c:1715
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1710 ../../printerdrake.pm_.c:1720
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1723
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1731
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1740 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:1747 ../../printerdrake.pm_.c:1748
-#: ../../printerdrake.pm_.c:2719 ../../standalone/drakbackup_.c:743
-#: ../../standalone/drakbackup_.c:2448 ../../standalone/drakfont_.c:580
-#: ../../standalone/drakfont_.c:792
-msgid "Close"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1743 ../../printerdrake.pm_.c:1755
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1744 ../../printerdrake.pm_.c:1756
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1746
-msgid "Print option list"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1768
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1775
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1797 ../../printerdrake.pm_.c:2224
-#: ../../printerdrake.pm_.c:2488
-msgid "Reading printer data..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1817 ../../printerdrake.pm_.c:1845
-#: ../../printerdrake.pm_.c:1880
-msgid "Transfer printer configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1821
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1823
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1827
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1828
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1832
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1833 ../../printerdrake.pm_.c:1850
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1846
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1854
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1859
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1867
-msgid "New printer name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1870
-#, c-format
-msgid "Transferring %s..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1881
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1890
-msgid "Refreshing printer data..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1969
-#: ../../printerdrake.pm_.c:1981
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1899
-msgid "Starting network..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1933 ../../printerdrake.pm_.c:1937
-#: ../../printerdrake.pm_.c:1939
-msgid "Configure the network now"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1934
-msgid "Network functionality not configured"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1938
-msgid "Go on without configuring the network"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1971
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1972
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1982
-msgid "Restarting printing system..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2020
-msgid "high"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2020
-msgid "paranoid"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2021
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2022
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2054
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2055
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2078 ../../printerdrake.pm_.c:2116
-#: ../../printerdrake.pm_.c:2146 ../../printerdrake.pm_.c:2179
-#: ../../printerdrake.pm_.c:2284
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2120
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2150
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2208
-msgid "Select Printer Spooler"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2209
-msgid "Which printing system (spooler) do you want to use?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2242
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2255
-msgid "Installing Foomatic..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2312 ../../printerdrake.pm_.c:2351
-#: ../../printerdrake.pm_.c:2736 ../../printerdrake.pm_.c:2806
-msgid "Printer options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2321
-msgid "Preparing PrinterDrake..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2338 ../../printerdrake.pm_.c:2893
-msgid "Configuring applications..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2358
-msgid "Would you like to configure printing?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2370
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2418
-msgid "Printerdrake"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2422
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2423
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2449
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2467
-msgid "Change the printing system"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2472 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2628 ../../printerdrake.pm_.c:2678
-#: ../../printerdrake.pm_.c:2887
-msgid "Do you want to configure another printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2714
-msgid "Modify printer configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2716
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2720
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2780
-msgid "Printer connection type"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2784
-msgid "Printer name, description, location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2728 ../../printerdrake.pm_.c:2799
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2729 ../../printerdrake.pm_.c:2800
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2810
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2815
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2741 ../../printerdrake.pm_.c:2824
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2833
-msgid "Print test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2743 ../../printerdrake.pm_.c:2835
-msgid "Know how to use this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2745 ../../printerdrake.pm_.c:2837
-msgid "Remove printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2789
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2813
-msgid "Default printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2814
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2818 ../../printerdrake.pm_.c:2821
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2822
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2827 ../../printerdrake.pm_.c:2830
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2831
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2839
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2841
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr ""
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr ""
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr ""
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr ""
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr ""
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr ""
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr ""
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:414
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:415
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:417
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr ""
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr ""
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:923
-msgid "System"
-msgstr ""
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr ""
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr ""
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr ""
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr ""
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr ""
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr ""
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr ""
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr ""
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:548
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:438
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:439
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:443
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:465
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:544 ../../standalone/drakbackup_.c:591
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:592 ../../standalone/drakbackup_.c:656
-msgid "Hard Disk Backup files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:604
-msgid "Backup User files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:605
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:655
-msgid "Backup Other files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:663
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-msgid ""
-"\n"
-" FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:676
-msgid " Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:717 ../../standalone/drakbackup_.c:728
-#: ../../standalone/drakbackup_.c:739 ../../standalone/drakfont_.c:788
-msgid "File Selection"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:744
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:779
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:780
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:781
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:782
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:783
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:784
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:801
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:828
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:829 ../../standalone/drakbackup_.c:853
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:851 ../../standalone/drakfont_.c:828
-msgid "Remove Selected"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:889
-msgid "Windows (FAT32)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:928
-msgid "Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:954
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:957
-msgid "Please enter the host name or IP."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:962
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter your login"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:972
-msgid "Please enter your password"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:978
-msgid "Remember this password"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1042 ../../standalone/drakbackup_.c:2038
-msgid "FTP Connection"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1049 ../../standalone/drakbackup_.c:2046
-msgid "Secure Connection"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1075 ../../standalone/drakbackup_.c:2879
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1078 ../../standalone/drakbackup_.c:2883
-msgid "Please choose your CD space"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1084 ../../standalone/drakbackup_.c:2895
-msgid "Please check if you are using CDRW media"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1090 ../../standalone/drakbackup_.c:2901
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1096
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1102
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1143
-msgid "Use tape to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1146
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1152 ../../standalone/drakbackup_.c:1193
-#: ../../standalone/drakbackup_.c:2003
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1185 ../../standalone/drakbackup_.c:1995
-msgid "Please enter the directory to save:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1199 ../../standalone/drakbackup_.c:2009
-msgid "Use quota for backup files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1257
-msgid "Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1287 ../../standalone/drakbackup_.c:1291
-#: ../../standalone/drakbackup_.c:1295
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1288 ../../standalone/drakbackup_.c:1292
-#: ../../standalone/drakbackup_.c:1295
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1289 ../../standalone/drakbackup_.c:1293
-#: ../../standalone/drakbackup_.c:1295
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1290 ../../standalone/drakbackup_.c:1294
-#: ../../standalone/drakbackup_.c:1295
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1302
-msgid "Use daemon"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1307
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1313
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1317
-msgid "Use Hard Drive with daemon"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1319
-msgid "Use FTP with daemon"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1323
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1359
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1401
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1406
-msgid "Where"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "When"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "More Options"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1435 ../../standalone/drakbackup_.c:2791
-msgid "Drakbackup Configuration"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1453
-msgid "Please choose where you want to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1455
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1466
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1530
-msgid "Please choose what you want to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1531
-msgid "Backup system"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1532
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1535
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1617
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1618
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1620
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1622
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1624
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1625
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1626
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1629
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1631
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1633
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1743
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1745
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1776
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1777
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1876
-msgid "         Restore Configuration       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1894
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1912
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1962
-msgid "Backup the system files before:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1964
-msgid "please choose the date to restore"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1992
-msgid "Use Hard Disk to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2073
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2075
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2133
-msgid "Select another media to restore from"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2135
-msgid "Other Media"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2141
-msgid "Restore system"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2142
-msgid "Restore Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Restore Other"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2149
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2150
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2207
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2215
-msgid "Custom Restore"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2256 ../../standalone/drakbackup_.c:2281
-#: ../../standalone/drakbackup_.c:2302 ../../standalone/drakbackup_.c:2323
-#: ../../standalone/drakbackup_.c:2341 ../../standalone/drakbackup_.c:2373
-#: ../../standalone/drakbackup_.c:2389 ../../standalone/drakbackup_.c:2409
-#: ../../standalone/drakbackup_.c:2428 ../../standalone/drakbackup_.c:2450
-#: ../../standalone/drakfont_.c:578
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2259 ../../standalone/drakbackup_.c:2286
-#: ../../standalone/drakbackup_.c:2305 ../../standalone/drakbackup_.c:2326
-#: ../../standalone/drakbackup_.c:2344 ../../standalone/drakbackup_.c:2392
-#: ../../standalone/drakbackup_.c:2412 ../../standalone/drakbackup_.c:2431
-msgid "Previous"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2261 ../../standalone/drakbackup_.c:2328
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2307
-msgid "Build Backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2346 ../../standalone/drakbackup_.c:3023
-msgid "Restore"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2394 ../../standalone/drakbackup_.c:2414
-#: ../../standalone/drakbackup_.c:2435
-msgid "Next"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2468
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2489
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2512
-msgid "Package List to Install"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2540
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2563
-msgid "Please select data to restore..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2584
-msgid "Please select media for backup..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2606
-msgid "Please select data to backup..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2628
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2649
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2729
-msgid "Backup system files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2731
-msgid "Backup user files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2733
-msgid "Backup other files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2735 ../../standalone/drakbackup_.c:2766
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2757
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2761
-msgid "Sending files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2831
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2889
-msgid "Please enter the cd writer speed"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2907
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2913
-msgid "Please check if you want to include install boot on your CD."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2979
-msgid "Backup Now from configuration file"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "View Backup Configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3010
-msgid "Wizard Configuration"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3014
-msgid "Advanced Configuration"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3018
-msgid "Backup Now"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3043
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3094
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3124
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3132
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3171
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3197 ../../standalone/drakbackup_.c:3272
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3199 ../../standalone/drakbackup_.c:3274
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3213
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3251
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3260
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3288
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:64
-msgid "usage: drakfloppy\n"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:68
-msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:69
-msgid "Module name"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:69
-msgid "Size"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:74 ../../standalone/drakfloppy_.c:373
-msgid "drakfloppy"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:91
-msgid "boot disk creation"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:99 ../../standalone/drakfloppy_.c:112
-msgid "default"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:115
-#, c-format
-msgid "DrakFloppy Error: %s"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:126
-msgid "kernel version"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:132
-msgid "General"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:137
-msgid "Expert Area"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:140
-msgid "mkinitrd optional arguments"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:141
-msgid "Add a module"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:161
-msgid "force"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:162
-msgid "if needed"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:163
-msgid "omit scsi modules"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:164
-msgid "omit raid modules"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:200
-msgid "Remove a module"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:222
-msgid "Output"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:234
-msgid "Build the disk"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:422
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:427
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:429
-#, c-format
-msgid "Unable to fork: %s"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:433
-#, c-format
-msgid ""
-"Unable to close properly mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:230
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:232
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:254
-msgid "no fonts found"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:262 ../../standalone/drakfont_.c:304
-#: ../../standalone/drakfont_.c:353 ../../standalone/drakfont_.c:413
-#: ../../standalone/drakfont_.c:422 ../../standalone/drakfont_.c:448
-#: ../../standalone/drakfont_.c:460 ../../standalone/drakfont_.c:473
-msgid "done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:266
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:302
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:305
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:328
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:351
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:354
-msgid "True Type fonts installation"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:358
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:362
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:369 ../../standalone/drakfont_.c:385
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:373 ../../standalone/drakfont_.c:389
-#: ../../standalone/drakfont_.c:409
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:378 ../../standalone/drakfont_.c:393
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:400
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:404
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:417
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:458 ../../standalone/drakfont_.c:468
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:470
-msgid "xfs restart"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:477 ../../standalone/drakfont_.c:761
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:551
-msgid "Fonts Importation"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:566
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:571
-msgid "Advanced Options"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:573
-msgid "Font List"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:740
-msgid "Choose the applications that will support the fonts :"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:744
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:748
-msgid "StarOffice"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:752
-msgid "Abiword"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:756
-msgid "Generic Printers"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:793
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:829
-msgid "Install List"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:859
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:896
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Selected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:898
-msgid "Remove List"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:915 ../../standalone/drakfont_.c:935
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:916
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:917
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:918
-msgid "Post Install"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:936
-msgid "Remove fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:937
-msgid "Post Uninstall"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:196
-msgid "Internet Connection Sharing"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:122
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:134
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:135
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-msgid "disable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "reconfigure"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:142
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:150
-msgid "Internet connection sharing is now disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:159
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:160
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-msgid "enable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:171
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:176
-msgid "Internet connection sharing is now enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:197
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:223
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:224
-#, c-format
-msgid "Interface %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:232
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:239
-msgid "Network interface"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:240
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:249
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:267
-msgid "Network interface already configured"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:268
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:273
-msgid "Automatic reconfiguration"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:274
-msgid "Show current interface configuration"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:276
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:288
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:293
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:294
-msgid "(This) DHCP Server IP"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:295
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:302
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:313
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:321
-msgid "Firewalling configuration detected!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:322
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:329
-msgid "Configuring..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:330
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:366
-#, c-format
-msgid "Problems installing package %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:549
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:566
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:567
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:568
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:573
-msgid "Internet connection sharing configuration"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:580
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr ""
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr ""
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr ""
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr ""
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr ""
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:51
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/draksec_.c:57
-msgid "Setting security user"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:55
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Canada (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "China (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "France [SECAM]"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "Ireland"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:75
-msgid "Australia"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:75
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:76
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:77
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:113
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:115
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:116
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:120
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:128
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:131
-msgid "There was an error while scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:132
-msgid "XawTV isn't installed!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:135
-msgid "Have a nice day!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:136
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:148
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:149
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:516
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:392
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:407
-msgid "Mail/SMS alert configuration"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:408
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:416
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:420
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:421
-msgid "xinetd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:424
-msgid "service setting"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:425
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:435
-msgid "load setting"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:436
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:449
-msgid "alert configuration"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:450
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:493
-msgid "Save as.."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr ""
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr ""
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr ""
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr ""
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr ""
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr ""
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr ""
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr ""
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr ""
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr ""
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr ""
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr ""
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr ""
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr ""
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr ""
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr ""
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "The K Desktop Environment, the basic graphical environment with a collection of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "A graphical environment with user-friendly set of applications and desktop tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr ""
diff --git a/perl-install/share/po/Makefile b/perl-install/share/po/Makefile
deleted file mode 100644
index c387c8f35..000000000
--- a/perl-install/share/po/Makefile
+++ /dev/null
@@ -1,71 +0,0 @@
-include ../../Makefile.config
-
-PMSFILES = $(wildcard $(ALLPMS:%=../../%))
-PMSCFILES = $(PMSFILES:%=%_.c)
-
-# temporarly don't include ar.po,br.po,cy.po,ga.po,is.po,ro.po,sl.po
-# (too low translation percentage)
-POFILES = $(shell ls *.po|grep -v '\(ar.po\|ga.po\|is.po\|ro.po\|sl.po\)')
-
-MOFILES = $(POFILES:%.po=%.mo)
-LANGS = $(POFILES:%.po=%)
-
-LOCALEDIR=$(DATADIR)/locale
-
-
-all: help $(MOFILES)
-
-help:
-	@if [ ! -d doc ]; then \
-		echo "Checking out doc stuff now ..."; \
-		cvs co doc/manual/{entities,literal/drakx}; \
-		rm -rf doc/CVS; \
-	else \
-		echo "Updating doc stuff now ..."; \
-		cvs update doc/manual/{entities,literal/drakx}; \
-	fi
-	./help_xml2pm.pl
-
-%.mo: %.po
-	msgfmt -o $@ $<
-
-$(PMSCFILES): %_.c: %
-	./fake_c.pl $< > $@
-
-$(POFILES): DrakX.pot
-	perl -ne 'print unless /^# DO NOT BOTHER TO MODIFY HERE, SEE:|^#.*\Qdrakx-help.xml/ .. /^$$/' $@ > $@t
-	if [ -e help-$@t ]; then perl -pe 's|^#~ ||' -i $@t ; msgmerge -C $@t help-$@t $< > $@; else msgmerge $@t $< > $@; fi
-	rm $@t
-
-DrakX.pot: $(PMSFILES)
-	$(MAKE) $(PMSCFILES);
-	xgettext -F -n --add-comments='-PO' --keyword=_ --keyword=__ -o $@ $(PMSCFILES)
-	rm $(PMSCFILES)
-	perl i18n_compssUsers 2>/dev/null >> $@
-
-install:
-	for l in $(LANGS); do \
-		install -d $(LOCALEDIR)/$$l/LC_MESSAGES; \
-		install -m 644 $$l.mo $(LOCALEDIR)/$$l/LC_MESSAGES/$(NAME).mo; \
-	done
-
-clean:
-	@rm -rf drakx-help.xml .memdump help-*.po{t,} doc empty.po tmp.* messages tmp.pot *.mo $(POFILES:%=%t) $(PMSCFILES)
-
-check:
-	@grep -F '$$' DrakX.pot && { echo "bad translation strings (contains \$$) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^"; exit 1; } ||:
-
-verif:
-	perl -ne '/^\s*#/ or $$i += my @l = /\b__?\(/g; END { print "$$i\n" }' $(PMSFILES)
-	perl -ne '$$i += my @l = /\.c:/g; END { print "$$i\n" }' DrakX.pot
-
-verif2: 
-#	perl -I ../.. -Mcommon -e 'foreach (qw($(PMSFILES))) { printf "package foo%d;\n", ++$$i; print common::cat_($$_) }' | perl -ne 'print if !/use (diagnostics|vars|strict)/' | OUTFILE=tmp.pm perl -I. -I../.. -Mb_dump_strings >/dev/null 2>/dev/null
-	perl -pe 's|$$|\\n\\|' tmp.pm > tmp.pm_.c
-	xgettext --keyword=_ -o tmp.po tmp.pm_.c 
-	msgmerge DrakX.pot tmp.po > tmp.pot
-	grep "^msgid" tmp.pot | sort > tmp.pot.light
-	grep "^msgid" DrakX.pot | sort | diff - tmp.pot.light | grep "^>" || true
-
-
-#	for i in *.po; do echo -n "$i "; msgfmt -v $i 2>&1; done | perl -e 'print map { $_->[0] } sort { $a->[1] <=> $b->[1] } map { [ $_, (split)[1] ] } <>'
diff --git a/perl-install/share/po/af.po b/perl-install/share/po/af.po
deleted file mode 100644
index 60896970c..000000000
--- a/perl-install/share/po/af.po
+++ /dev/null
@@ -1,12923 +0,0 @@
-# KTranslator Generated File
-# Copyright (c) 1999-2000 MandrakeSoft
-# Schalk. W. Cronj� <schalkc@ntaba.co.za>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-09-09 22:06-0000\n"
-"Last-Translator: Schalk W. Cronj� <schalkc@uk.ntaba.com>\n"
-"Language-Team: Afrikaans <mandrake@af.org.za>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfigureer skyfkoppe afsonderlik"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Gebruik Xinerama-ekstensies"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigureer net die \"%s\" kaart (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Multikopkonfigurasie"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"U stelsel onderstuen multikopkonfigurasie.\n"
-"Wat wil u doen?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Videokaart"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Selekteer 'n videokaart"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Kies 'n X-bediener"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X-bediener"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Kies 'n X-bediener"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X-bediener"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Watter tipe XFree-konfigurasie verlang u?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"U videokaart kan slegs 3D-versnelling onder XFree %s ondersteun.\n"
-"DIt word wel onder XFree %s ondersteun wat dalk beter 2D-ondersteuning het."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"U videokaart kan vir 3D-hardewareversnelling ondestuen word in XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s met 3D-hardwareversnelling"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
-"bied,\n"
-"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s met EKSPERIMENTELE 3D-hardewareversnelling"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
-"bied,\n"
-"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES.\n"
-"U kaart word deur XFree %s ondersteun, wat beter 2D-ondersteuning bied."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installasievertoondrywer)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree-konfigurasie"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Kies die geheue grootte van u videokaart"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Selekteer opsies vir bediener"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Kies 'n monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Die kritiese twee parameters is die vertikale verfristempo (die tempo\n"
-"waarteen die hele skerm verfris) en die horisontale sinkronisasietempo (die\n"
-"tempo waarteen die horisontale skandeerlyne vertoon word). Lg. is die\n"
-"belangrikste.\n"
-"\n"
-"Dit is BAIE BELANGRIK dat u nie 'n sinkronisasie bereik buite di� van u\n"
-"monitor spesifiseer nie, dit kan die monitor beskadig. Indien u twyfel,\n"
-"kies konservatief."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horisontale verfristempo"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikale verfristempo"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor is nie opgestel nie"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafikakaart is nog nie konfigureer nie"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Resolusie is nog nie gekies nie"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Wil u die konfigurasie toets?"
-
-#
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Waarskuwing: Toetsing is gevaarlik met hierdie videokaart"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Toets konfigurasie"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"probeer van die parameters verander"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Daar was 'n fout:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "uitgang binne %ds"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Is dit korrek?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Hier is fout, probeer van die parameters verander"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolusie"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Kies die resolusie en kleurdiepte"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Videokaart: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 bediener: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Nog"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "OK"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Kundige modus"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Vertoon almal"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resolusies"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Sleutelbord uitleg: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muistipe: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muistoestel: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HoriSink: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertVerfris: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Videokaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Videokaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Video geheue: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kleurdiepte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolusie: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 bediener: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86-drywer: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X-Window konfigurasie word opgestel"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Wat wil u doen?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Verander monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Verander videokaart"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Verander bedienerinstellings"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Verander resolusie"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Vertoon inligting"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Toets weer"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Verlaat"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Behou die veranderinge?\n"
-"Huidige konfigurasie is:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X met herlaai"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ek kan u rekenaar so opstel om X outomaties te laai.\n"
-"Wil u X begin met 'n herlaai?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Teken asb. weer in %s om veranderinge te aktiveer"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Teken uit en gebruik dan Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kleure (8 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32-duisend kleure (15 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65-duisend kleure (16 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16-miljoen kleure (24 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 biljoen kleure (32 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64MB of meer"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standaard VGA,  640x480 teen 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 teen 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-aanpasbaar, 1024x768 teen 87Hz interverweef (nie 800x600 nie)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 102x768 teen 87 Hz interverweef, 800x600 teen 56 Hz "
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Verlengde Super VGA, 800x600 teen 60 Hz, 640x480 teen 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Nie-interverweefde SVGA, 1024x768 teen 60 Hz, 800x600 teen 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Hod frekwensie SVGA, 1024x768 teen 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekwensie wat 1280x1024 kan doen teen 60Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekwensie wat 1280x1024 kan doen teen 74Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekwensie wat 1280x1024 kan doen teen 76Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor wat 1600x1220 kan doen teen 70Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor wat 1600x1220 kan doen teen 76Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Eerste sektor van herlaaipartisie"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Eerste sektor van skyf (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO installasie"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Waar wil u die herlaaistelsel installeer"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub installasie"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO met tekskieskaart"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO met grafiese kieskaart"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Laai vauit DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Herlaaistelsel hoofopsies"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Herlaaistelsel om te gebruik"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Herlaaiprogram installasie"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Herlaaitoestel"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (werk nie op 'n ou BIOS'e nie)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompak"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompak"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Videomodus"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Wagperiode voro verstekstelsel gelaai word"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Wagwoord"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Wagwoord (weer)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Beperk instruksielynopsies"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "beperk"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Maak /tmp skoon met elke herlaai"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Presiese RAM grootte indien nodig (%d MB bespeur)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Gebruik multiprofiele"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Gee die geheuegrootte in MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opsie ``Beperk instruksielynopsies'' kan nie sonder wagwoord gebruikword nie"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Probeer asb. weer"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Die wagwoorde stem nie ooreen nie."
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Beginboodskap"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Tydsbeperking vir stelselkernlaai"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Laat CD-herlaai toe?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Laat OF-herlaai toe?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Verstek bedryfstelsel?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hier is die huidige inskrywings\n"
-"U kan byvoeg or verwyder soos nodig."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Voeg by"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Klaar"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Verander"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Watter tipe inskrywing wil u byvoeg?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Ander bedryfstelsel (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Ander bedryfstelsel (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Ander bedryfstelsel (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Beeld"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Basis"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Aanlas"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lees-skryf"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Onveilig"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiket"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Verstek"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-grootte"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Geen video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Verwyder inskrywing"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Le� etiket word nie toegelaat nie"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "U moet oor 'n ruilpartisie beskik"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Hierdie etiket is alreeds in gebruik"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Het %s %s koppelvlakke gevind"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Beskik u oor nog?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Het u enige %s koppelvlakke?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nee"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Sien hardeware inligting"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Drywer vir %s kaart %s in installasieproses"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Watter %s drywer meot ek probeer?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"In sekere gevalle sal die %s drywer ekstra inligting benodig, alhoewel in\n"
-"meeste gevalle dit nie nodig wees nie. Wil u ekstra opsies voorsien od moet\n"
-"rekenaar self daarvoor aftas. In uitsonderlike gevalle mag die rekenaar\n"
-"ophang, maar dit sal nie skade veroorsaak nie."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Aftas"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Spesifieer opsies"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"U kan noue die opsies voorsien vir module %s.\n"
-"Opsies is in die formaat ``naam=waarde naam2=waarde2 ...''.\n"
-"Bv. ``io=0x300 irq-7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Module opsies:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Laai van module %s het gefaal.\n"
-"Wil u ander parameters probeer?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s alreeds bygevoeg)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Die wagwoorde is te eenvoudig"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Gee asb. 'n gebruikerskode"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Die gebruikerskode maag alleenlikui kleinletter, nommers, '-' en '_' bestaan"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Hierdie genruikerskode bestaan alreeds"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Voeg gebruiker by"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Tik 'n gebruiker in\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aanvaar gebruiker"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Regte naam"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Gebruikerskode"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Dop"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikoon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Outointeken"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ek kan u rekenaar so opstel om X outomaties een gebruiker in te teken.\n"
-"Verlang u hierdie funksionaliteit?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Kies die verstek gebruiker:"
-
-#
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Kies die vensterbestuurder om te loop:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Alles"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Voeg 'n gebruiker by"
-
-#
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Aangepaste"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS word gelaai"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Kanselleer"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Krakers welkom"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Swak"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standaard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Hoog"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Hoog"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Parano�es"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Hierdie vlak moet met sorg gebruik word. Dit maak 'n stelsel baie maklik\n"
-"om te gebruik, maar is baie sensitief. Dit moet nie gebruik vir 'n rekenaar\n"
-"wat aan ander rekenaars of die internet gekoppel is nie. Daar is geen "
-"wagwoord\n"
-"toegang nie."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Wagwoorde is nou ontsper, maar gebruik as 'n netwerkrekenaar word nie "
-"aanbeveel nie."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Hierdie is die standaard sekuriteitsvlak wat aanbeveel word vir rekenaars\n"
-"wat aan die internet as 'n kli�nt konnekteer. Daar is heelwat "
-"sekuriteitstoetse."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Met hierdie sekuriteitsvlak, kan die stelsel as 'n bediener gebruik word.\n"
-"Die sekuriteit is goed genoeg sodat 'n stelsel konneksies wat baie kli�nte\n"
-"af kan aanvaar."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Hierdie is Vlak-4 sekuriteit, maar die stelsel is afgeslote.\n"
-"Sekuriteitseienskappe is maksimaal."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Gebruik sekuriteitsvlak"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Sekuriteitsvlak word gestel."
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Selekteer opsies vir bediener"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welkom by %s die bedryfstelselkeuseprogram!\n"
-"\n"
-"Kies u bedryfstelsel uit die bogelyste opsies of wag\n"
-"%d sekonde vir die verstekopsie.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welkom by GRUB, die bedryfstelselkieskaart!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Gebruik die %c en %c sleutels om die inskrywing te kies wat uitgelig moet "
-"word."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Druk ENTER om die gekose bedryfstelsel te laai, 'e' om te redigeer."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "instruksies voor herlaai, of 'c' vir 'n instruksielyn."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Die uitgeligte inskrywing sal outomaties in %ds gelaai word."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nie genoeg spasie in /boot nie"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Werkskerm"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Beginkieskaart"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Waar wil u die herlaaistelsel installeer"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "Gee hulp beskikbaar nie (nog nie).\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Herlaaistylkonfigurasie"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_L�er"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/L�er/_Verlaat"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<ctrl>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Nuwe monitorkategoriasiestyl"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Nuwe styl monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradisionele monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradisionele Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Laai Aurora met herlaaityd"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB metode"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot metode"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"U gebruik huidig %s as herlaaibestuurder.\n"
-"Kliek op Konfigureer om opstelassistent te laai."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigureer"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Stelselmode"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Laai X-Windowstelsel met herlaai"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nee, ek verlang outo-aanteken"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, ek verlang outoaanteken met hierdie (gebruiker,werkskerm)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kan nie /etc/inittab oopmaak vir lees nie: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minute"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuut"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekondes"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Ek kan nie meer partisies byvoeg nie"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Frankryk"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belgies"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Duitsland"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grieks"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norweegs"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Sien"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Italiaans"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "seriaal"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Rugsteun u data eers asb."
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lees noukeurig!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Indien u beplan om 'aboot' te gebruik, los spasie aan die begin\n"
-"van die skyf. (2048 sektors is genoeg)."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Fout"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistent"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Kies aksie"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"U het een massiewe FAT partisie. \n"
-"(gewoonlik deur DOS/Windows gebruik)\n"
-"Ek stel voor u verstel eers die grootte van di� partisie\n"
-"(kliek daarop en kliek dan op \"Verstel Grootte\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detail"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "Gejoernaliseer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Ruilarea"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Leeg"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Ander"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "LOersteltipes:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Skep"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipe"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Gebruik ``%s'' instede."
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Uitwis"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Gebruik ``Ontheg'' eerste"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Alle data om hierdie partisie %s sal uitgewis word na verandering van die "
-"partisietipe"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Kies 'n partisie"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Kies 'n ander partisie"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Verlaat"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Skakel oor na kundige gebruiksvlak"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Skakel oor na normale gebruiksvlak"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Herroep"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Wil u in elk geval voortgaan?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Verlaat, maar moenie iets stoor nie"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Wil u verlaat, sonder om die partisietabel op te dateer?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Wil u die /etc/fstab veranderinge stoor?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Outo-allokeer"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Verwydeer almal"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Hardeskyfinligting"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Alle prim�re partisies is gebruik"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ek kan nie meer partisies byvoeg nie"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Om meer partisies te verkry, verwyder asb. een om 'n ektensiepartisiete kan "
-"skep"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Skryf partisietabel"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Reddingspartisietabel"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Reddingspartisietabel"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Reddingspartisietabel"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Verwyderbare media"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Selekteer lOer"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Die rugsteunpartisietabel het nie dieselfde grootte nie\n"
-"Wil u voortgaan?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Waarskuwing"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Sit 'n floppie in die aandrywer.\n"
-"Alle data op hierdie floppie sal verloor word."
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Partisietabel Reddingspoging"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Gedetaileerde inligting"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Hegpunt"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opsies"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Verstel Grootte"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Skuif"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatteer"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Heg"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Voeg by RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Voeg by LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Ontheg"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Verwyder uit RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Verwyder uit LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Verander RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Gebruik vir teruglus"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Kies 'n nuwe grootte"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Kies sektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Grootte in MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "LOerstelseltipe: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Hegpunt:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Voorkeure: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Teruglusl�er %s word geformateer"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Verander partisietipe"
-
-#
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Watter l�erstelsel verlang u?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Oorskakeling van ext2 na ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Waar wil u teruglusl�er %s heg?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Waar wil u toestel %s heg?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan nie hegpunt ontset nie, omdat hierdie partisie vir teruglus\n"
-"gebruik word. Verwyder eers die teruglus."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "FAT l�erstelselgrense word bereken"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Grootteverandering"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Hierdie partisie se greootte kan nie verstel word nie"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Alle data om hierdie partisie moet gerugsteun word."
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Alle data om partisie %s sal uitgewis word met die grootteverandering"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Kies die nuwe grootte"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nuwe grootte in MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na watter skyf wil u skuif?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na watter sektor wil u skuif?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Verskuiwing"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Partisie word verskuif..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Kies 'n bestaande RAID om by toe te voeg"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nuut"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Kies 'n bestaande LVM om by toe te voeg"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM naam?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Hierdie partisie kan nie vir teruglus gebruik word nie."
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Teruglus"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Teruglus l�ernaam:"
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Regte naam"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "L�er word alreeds deur 'n ander teruglus gebruik,kies 'n ander een"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "L�er bestaan alreeds. Moet dit gebruik word?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Hegopsies:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Verskeie"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "toestel"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "vlak"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "blokgrootte"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Wees versigtig: hierdie is 'n gevaarlike operasie"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Watter tipe van partisionering?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Jammer, ek kan nie die versoek om /boot om hierdie skyf (op 'n silinder > "
-"1024) te skep,\n"
-"aanvaar nie. As u LILO gebruik sal dit nie werk nie en as u nie LILO "
-"gebruik\n"
-"nie, dan het u nie /boot nodig nie."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"_ keuse vir die \"root\" partisie (/) is fisies buite die 1024de silindervan "
-"die\n"
-"hardeskyf en u het nie 'n /boot partisie nie. Indien u beplan om LILO te "
-"gebruik,moet u\n"
-"asb. 'n /boot partisie skep,"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"U het 'n sagteware RAID-partisie as wortel (/).\n"
-"Geen herlaaistelsel sal dit kan hanteer sonder 'n /boot partisie nie.\n"
-"Onthou om 'n /boot by te voeg."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partisietabel van skyf %s gaan opdateer word!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "U sal moet herlaai voor die veranderinge geaktiveer kan word"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Alle data om partisie %s sal uitgewis word met formatering."
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatering"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Teruglusl�er %s word geformateer"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Partisie %s word formateer"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid het gefaal"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "LPD word verwyder..."
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Toestel:"
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-skyfletter: %s ('n raaiskoot)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipe:"
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Naam: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Begin: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Grootte: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektore"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silinder %d na silinder %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Geformateer\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nie geformatter\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Geheg\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Teruglus l�er(s): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Verstekpartisie vir herlaai\n"
-"  (vir MS_DOS doeleindes, nie LILO s'n nie)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Vlak %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Blokgrootte %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-skywe %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Teruglus l�ernaam: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Dis hoogs waarskynlik dat hierdie partisie\n"
-"drywerpartisie is en verkieslik alleen gelos\n"
-"moet word.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Hierdie spesiale herlaaipartisie\n"
-"is om u stelsel te duolaai.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Grootte: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s silinders, %s koppe, %s sektore\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info:"
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-skywe %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partisietabeltipe: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "op bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opsies: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "LOerstelseltipe: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Die wagwoorde stem nie ooreen nie."
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Verander tipe"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS bediener"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering ban %s het gefaal"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ek weet nie om %s as tipe %s te formateer nie"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck het gefaal met kode %d of sein %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fout met onthegting van %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "eenvoudig"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "bediener"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "U kan nie JFS vir partisies kleiner as 16MB gebruik nie"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "U kan nie ReiserFS vir partisies kleiner as 32MB gebruik nie"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Hegpunte moet met 'n / begin"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Daar is alreeds 'n partisie met hegpunt %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "U kan nie  LVM logiese volume vir hegpunt %s gebruik nie."
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Hierdie l�ergids moet altyd in die wortell�erstelsel bly"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "U benodig 'n ware l�erstelsel (ext2, reiserfs) vir hierdie hegpunt\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "U kan nie  LVM logiese volume vir hegpunt %s gebruik nie."
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Four om %s in skryfmode te open: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"'n Fout het voorgekom - geen geldige toestelle om die nuwe l�erstelsels op "
-"te skep, is gevind nie. Deursoek asb. die hardeware vir die oorsaak."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "U get geen partisies nie!"
-
-#: ../../help.pm_.c:13
-#, fuzzy
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux is 'n multigebruikerstelsel en dit beteken dat elke gebruiker sy "
-"eie\n"
-"voorkeure kan stel, met sy eie l�ers ens. U kan meer hieroor in die "
-"gebruikersgids\n"
-"lees. Maak andersins as 'root', die supergebruiker, kan gebruikers wat u "
-"hier byvoeg\n"
-"niks verander behalwe hul eie l�ers en konfigurasie nie. U moet ten minste "
-"een gewone\n"
-"gebruiker vir u self skep. Hierdie gebruker is die een waaronder u moet "
-"inteken vir\n"
-"normale gebruik van die stelsel. Alhoewel dit baie gemaklik is om as 'root' "
-"in te teken vir\n"
-"daaglikse werk, is dit baie gevaarlik. 'n Eenvoudige fout kan u stelsel "
-"immobiliseer. 'n Fout\n"
-"wat as gewone gebruiker gemaak word sal net daardie gebruiker be�nvloed\n"
-"en nie hele stelsel nie.\n"
-"\n"
-"\n"
-"Eers moet u u eie naam intik. Dit is nie verpligtend nie, want u kan eintlik "
-"enigiets intik as\n"
-"u wil. DrakX sal dan die eerste woord wat u ingetik het in die "
-"gebruikerskode inskrywingsveld\n"
-"plaas. U kan hier verander indien u wil. Dit is die gebruikerskode waarmee "
-"die gebruiker in die\n"
-"stelsel sal inteken. U moet dan ook 'n wagwoord hier invoeg. 'n Gewone "
-"gebruiker se wagwoord\n"
-"is nie so krities as di� van die supergebruiker (uit 'n sekuriteitsoogpunt) "
-"nie, maar daar is geen\n"
-"rede om agterlosig met u data te wees nie.\n"
-"\n"
-"\n"
-"Indien u op Aanvaar kliek sal die gebruiker geskep word en kan u nog "
-"gebruikers byvoeg.\n"
-"U kan vir al u vriende gebruikerskodes skep of sommer een vir pa en ma ook. "
-"Wanneer u\n"
-"klaar is kliek op Klaar.\n"
-"\n"
-"Kliek op die Gevorderd knoppie indien u die verstek instruksiedop vir die "
-"gebruiker wil verander.\n"
-"Dit is bash by verstek."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"U kan nou dienste kies wat by herlaaityd moet afskop.\n"
-"Wanneer u die muis oor 'n item beweeg, sal 'n klein ballon opspring\n"
-"wat die rol van die diens verduidelik.\n"
-"\n"
-"Wees versigtig met hierdie stap. Indien u beplan om di� rekenaar as 'n\n"
-"bediener te gebruik wil u nie dienste afskop wat u nie gaan gebruik nie."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-#, fuzzy
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Voordat u voortgaan, lees asb die lisensieterme noukeurig deur. Dit dek\n"
-"die hele Mandrake Lnux distirbusie, and indien u nie saamstem met al die\n"
-"terme daarin bevat nie, kliek om die Weier knoppie. Dit sal onmiddelik die\n"
-"installasie stop sit. Om met die installasie voort te gaan kliek op die "
-"Aanvaar\n"
-"knoppie."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr "Kies asb. "
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Kies asb. die korrekte poort. Onthou dat COM1 onder MS Windows \n"
-"ttyS0 onder GNU/Linux is."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (Die LInux LOader) en Grub is herlaaistelsels. Beide kan GNU/Linux of "
-"enige ander\n"
-"bedryfstelsel wat op u rekenar teenwoordig is, laai. Gewoonlik word hierdie\n"
-"beryfstelsels reg bespeur en bygevoeg. Indien nie, kan u 'n inskrywing maak\n"
-"op hierdie skerm. Maak seker u kies die korrekte paramters.\n"
-"\n"
-"\n"
-"U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die "
-"nodige\n"
-"inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe nodig om die\n"
-"betrokke bedryfstelsels te laai."
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"U moet aandui waar u die informasie om Linux te herlaai, wil plaas.\n"
-"\n"
-"\n"
-"Behalwe as u werklik weet wat u doen moet u \"Eerste sektor van skyf (MBR)\" "
-"kies."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX sal probeer om vir PCI SCSI-kaarte te soek.\n"
-"Indien DrakX 'n SCSI-kaart bespeur en weet watter drywer omte gebruik sal "
-"dit outomaties installeer word.\n"
-"\n"
-"Indien u nie oor 'n SCSI-kaart, beskik nie of  oor  'n ISA SCSI-kaart of 'n "
-"PCI SCSI-kaart beskik wat DrakX nie kan herken nie, sal u gevra word of daar "
-"enige SCSI-kaarte in diestelsel is. Indien daar geen is nie kliek op 'Nee', "
-"andersins op 'Ja'. U sal dan uit'n drywerlys kan kies.\n"
-"\n"
-"\n"
-"Indien u self 'n drywer moes spesifiseer, sal DrakX u ook vra vir enige "
-"spesifiekeopsies.\n"
-"U kan egter DrakX toelaat om self die hardeware te ondervra. DIt werk "
-"gewoonlik die beste.\n"
-"\n"
-"Lees die installasie inligting hoe om hierdie tipe inligting m.b.v. die "
-"Windows-bedryfstelsel te bekom.\n"
-"U kan dit ook vanaf die internet onttrek indien u sulke toegang het."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan nie uitsaau sonder 'n NIS-domein nie"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sit 'n FAT-geformatteerde skyf in aandrywer %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Hierdie floppie is nie in FAT-formaat nie"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Om hierdie gestoorde pakketkeuse te gebruik, herlaai die installasie met "
-"\"linux defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fout met die les van l�er %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sekere hardeware op u rekenaar benodig geslote drywers.\n"
-" U kan inligting hieroorvind by %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"U moet 'n wortelpartisie definieer.\n"
-"Skep 'n partisie of kliek op 'n bestaande een.\n"
-"Kies dan Hegpunt en stel dit dan '/'."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "U moet oor 'n ruilpartisie beskik"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"U het nie 'n ruilpartisie nie\n"
-"\n"
-"Wil u steeds voortgaan?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "U moet oor 'n FAT partisie wat as /boot/efi geheg is, beskik"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Gebruik beskikbare spasie"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Gebruik bestaande partisies"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Daar is geen bestaande partisies om te gebruik nie"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Gebruik vir die Windows-partisie vir teruglus"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Watter partisie wil u vir Linux4Win gebruik?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Kies die groottes"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Basispartisiegrootte in MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Ruilpartisiegrootte in MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Watter partisie se grootte wil u verander?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Windowsl�erstelselgrense word bereken"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Die FAT-verstellingsprogram kan nie u partisie hanteer nie.\n"
-"Fout: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "U Windows-partisie is te gefragmenteer. Loop eers 'defrag' asb."
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"WAARSKUWING\n"
-"\n"
-"DrakX moet nou u WIndowspartisie se grootte verander. Hierdie operasie\n"
-"IS GEVAARLIK. Indien u nie alreeds so gemaak het nie, moet u hierdie "
-"installasie\n"
-"verlaat, scandisk onder Windows loop en dalk ook defrag. Dan kan u terugkeer "
-"na\n"
-"hierdie installasie. Rugstuen ook u data. Insien u skeer is van u saak, kies "
-"OK."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Watter grootte wil u vir Windows behou?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partisie %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-grootteverandering het gefaal: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
-"spasie nie) te gebruik nie"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Wis hele skyf"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Verwyder Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "U het meer as een hardeskyf, waar wil u Linux installeer?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Alle bestaande partisies en data sal uitgewis word op skyf %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Gespesialiseerde skyfpartisionering"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Gebruik fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"U het nou partisie %s partisioneer.\n"
-"Wanneer u klaar is, stoor u veranderinge met 'w'."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Die Windowspartisie beskik nie oor die nodige spasie nie."
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ek kon geen plek vir installasie vind nie."
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Die DrakX partisioneringsassistent het die volgende oplossings:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partisionering het misluk: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Netwerk op pad op"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Netwerk op pad af"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"'n Fout het plaasgevind en ek weet nie hoe om dit veilig te hanteer\n"
-"nie. Gaan op u eie risiko voort."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplikaat hegpunt %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Sekere belangrike pakkette het nie korrek ge�nstalleer nie.\n"
-"�f die CDROM-aandrywer �f die CD is foutief.\n"
-"Toets die CD op 'n werkende Linux installasie met \"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Welkom by %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Geen sagteskyaandrywer beskikbaar nie"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Gaan stap '%s' binne\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"U stelsel het min hulpbronne beskikbaar. U mag dalk probleme ondervind met "
-"die installering\n"
-"van Mandrake Linux. In so 'n geval probeer eerder die teksinstallasie. "
-"Daarvoor moet u\n"
-"'F1' druk wanneer u vanaf die CDROM herlaai en dan 'text' op die "
-"instruksielyn intik."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installasieklas"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Kies asb. een van die volgende installasieklasse:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Die totale grootte vir die gekose groepe is naastenby %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Indien u verkies om minder as hierdie grootte te installeer, kies dan 'n\n"
-"persentasie van pakkette wat u wil installeer.\n"
-"\n"
-"'n Lae persentasie sal net die belangrikste pakkette installeer;\n"
-"'n persentasie van 100%% sal alles gekose pakkette installeer."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"U het net spasie op u hardeskyf vir %d%% van hierdie pakkette.\n"
-"\n"
-"Indien u minder wil installeer, kies die persentasie wat u verlang.\n"
-"'n Lae persentasie sal net die belangrikste pakkette installeer;\n"
-"'n Persentasie van %d%% sal soveel moontlik probeer installeer."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "U sal met meer akkuraatheid in die volgende stap kan kies."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Persentasie pakkette om te installeer"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Kies pakketgroepe"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Individuele pakketseleksie"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Totale grootte: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Foutiewe pakket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Naam: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Weergawe: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Groote: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Belangrikheid: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"U kan nie hierdie pakket selekteer nie, omdat daar nie meer spasie "
-"beskikbaar is nie"
-
-#
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Die volgende pakkette gaan installeer word"
-
-#
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Dei volgende pakkette gaan verwyder word"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "U kan nie hierdie pakket selekteer/deselekteer nie"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Hierdie is 'n verpligte pakket. Dit kan nie uitgehaal word nie."
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds ge�nstalleer"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "U kan nie hierdie pakket deselekteer nie. Dit moet opgradeer word."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Wys outogeselekteerde pakkette."
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installasie"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Laai/Stoor op floppie"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Pakketseleksie word opgedateer"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimale installasie"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Besig met installasie"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Skatting"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tyd oor "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Wag asb. installasie word voorberei"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakkette"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installeer pakket %s"
-
-#
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aanvaar "
-
-#
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Weier"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Verander u CDROM!\n"
-"\n"
-"Sit asb. die CDROM getiteld \"%s\" in die aandrywer en druk OK. Indien u "
-"nie\n"
-"hieroor beskik nie, druk Kanselleer om installasies vanaf di� CDROM te vermy."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Gaan steeds voort?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Daar was 'n fout met pakkette:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Daar was 'n fout met die installasie van die pakkette:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "'n Fout het voorgekom"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Wil u die werklik die drukker verwyder?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lisensieooreenkoms"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Sleutelbord"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Wat is u sleutelborduitleg?"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Watter installasieklas verlang u?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installeer/Opgradeer"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Is hierdie 'n installasie of opgradering?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Aanbevole"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Kundige"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Opgradeer"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Pakketseleksie word opgedateer"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Wat is u muistoestel?"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Muispoort"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Aan watter seriaalpoort is u muis gekoppel?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Knoppie-emulasie"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Knop-2 Emulasie"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Knop-3 emulasie"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Stel PCMCIA op..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE word opgestel"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "geen beskikbare partisies"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Hegpunte vir partisies word nou gesoek"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Kies die hegpunte"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ek kan nie u partisietabel lees nie, dit is te korrup.\n"
-"Ek sal die nodige partisies skoonmaak, maar alle data sal vernietig word.\n"
-"Die ander opsie is om DrakX te belet om die partisietabel te verander.\n"
-"(fout is %s)\n"
-"\n"
-"Will u al die partisies verwyder?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DrakX kon nie die partisietabel korrek interpreteer nie.\n"
-"Gaan aan op u eie risiko!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Geen beskikbare 1MB herlaaipartisie nie! Installasie sal voortgaan, maar u "
-"sal  herlaaipartisie met DiskDrake moet skep indien u die stelsel wil "
-"herlaai."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Geen wortell�erstelsel gevind nie"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Basispartisie"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Wat is die basispartisie (/) van u stelsel?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "U moet herlaai om die partisietabelveranderinge te aktiveer"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Kies die partisies om te formatteer"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Toets vir foutiewe areas?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Partisies word formateer"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "L�er %s word geskep en formatteer"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nie genoeg ruilarea om die installasie te voltooi. Voeg asb. by."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Soek vir beskikbare pakkette"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Soek vir pakkette om op te gradeer."
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"U stelsel het nie genoeg plek vir 'n installasie of opgradering nie (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Klaar (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Aanbevole (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Kies asb. die laai of stoor pakketkeuse op die floppie.\n"
-"Die formaat is dieselfde as outoinstallasie-genereerde floppies."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Laai vanaf floppie"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Oplaai vanaf floppie"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Pakketkeuse"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Sit 'n floppie met die pakketkeuse in aandrywer "
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Stoor op floppie"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Geselekteerde grootte is groter as beskikbare spasie."
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Kies pakket om te installeer"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Wag"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Indien u oor al die gelyste CD's beskik, kliek OK.\n"
-"Indien u oor geen van die gelyste CD's beskik nie, kliek Kanselleer.\n"
-"Indien u net oor sekere CDs beskik, deselekteer die ander en kliek OK."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CDROM getiteld \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Berei installasie voor"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installeer nou pakket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Postinstallasiekonfigurasie"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sit asb. die module-opdateringsfloppie in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"U het nou die kans om enkripsieprogrammatuur af te laai.\n"
-"\n"
-"WAARSKUWING:\n"
-"\n"
-"A.g.v. die verskillende algemene vereistes wat van toepassing gemaak word "
-"deur\n"
-"wetgewing,  moet die eindgebruiker van hierdie sagteware seker wees dat die\n"
-"wette in sy/haar land dit wel toelaat dat om hierdie agteware af te laai, "
-"aan te hou\n"
-"en te gebruik.\n"
-"Daarbenewens moet die gebruiker seker maak dat plaaslike wetgewing nie "
-"oortree\n"
-"word nie. Misbruik kan lei tot ernstige sanksies.\n"
-"\n"
-"In geen geval kan MandrakeSoft nog sy vervaardigers en verskaffers "
-"verantwoordelik\n"
-"gehou word vir spesiale, indirekte or toevallige skade berokken (insluitend, "
-"maar nie\n"
-"beperk tot, winsverlies, besigheidsonderbreking, dataverlies en enige "
-"voorspruitende laste\n"
-"soos moontlik bepaal deur die wetgewende hof) wat vooruitspruit uit die "
-"gebruik, besit\n"
-"of aflaai van hierdie programmatuur nie, na tekening wat hierdie ooreenkoms "
-"nie.\n"
-"\n"
-"\n"
-"Vir navrae vewant aan hierdie ooreenkoms, kontak asb.\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Spie�l word gekontak vir die lys van pakkette"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Kies 'n spie�l waar die pakkette verkry kan word"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Spie�l word gekontak vir die lys van pakkette"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Wat is u tydsone?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardewareklok gestel vir GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Outotydsinkronisasie met NTP"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP-bediener"
-
-#
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Verwyder CUPS-bediener"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Geen drukker"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Beskik u oor nog?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Opsomming"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Muis"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Tydsone"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Drukker"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN-kaart"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Klankkaart"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-kaaer"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "KDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Plaaslike l�ers"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Kies 'root' se wagwoord"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Geen wagwoord"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Magtiging"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP-magtiging"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Basis-dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP-bediener"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS-magtiging"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS-domein"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS-bediener"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
-"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
-"u nie SILO op u stelsel wil installeer nie, 'n ander bedryfstelsel SILO\n"
-"verwyder of SILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
-"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
-"ernstige stelselfalings te herstel.\n"
-"\n"
-"Indien u 'n herlaaiskyf wil maak,\n"
-"plaas 'n skyf in die aandrywer en druk \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Eerste sagteskyfaandrywer"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Tweede sagteskyfaandrywer"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Mis hierdie stap"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
-"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
-"u nie LILO (of Grub) op u stelsel wil installeer nie, 'n ander bedryfstelsel "
-"LILO\n"
-"verwyder of LILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
-"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
-"ernstige stelselfalings te herstel. Wil u 'n herlaaiskyf maak?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Jammer, geen sagteskyfaandrywer beskikbaar nie"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Kies die sagteskyfaandrywer wat u wil gebruik"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Sit 'n skyf in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Herlaaiskyf word geskryf"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Herlaaistelsel word voorberei"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Wil u aboot gebruik?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Die 'aboot' installasie het gefaal. Wil u 'n installasie afwurg al\n"
-"word die eerste partisie vernietig?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Herlaaistelselinstallasie"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installasie van herlaaiprogram het gefaal a.g.v. hierdie fout: "
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sit 'n le� floppie in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Outoinstallasieskyf word geskep."
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Bepaalde stappe is nie afgehandel nie.\n"
-"\n"
-"Wil u werklik nou aborteer?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Geluk, installasie is afgehandel.\n"
-"Verwyder die herlaaimedium en druk 'enter' om te herlaai.\n"
-"\n"
-"\n"
-"Vir lapinligting oor hierdie vrystelling vanMandrake Linux,\n"
-"bekyk die errata beskikbaar op\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Inligting oor stelskonfigurasie is beskikbaar in die postinstallasie-\n"
-"hoofstuk in die Offisi�le Liux-Mandrake Gebruikersgids."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Skep outoinstallasieskyf"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Outomaties"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Herspeel"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Stoor pakketseleksie"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installasie %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> tussen elemente  | <Space> selekteer | <F12> volgende skerm "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu is weg"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Kies 'n l�er"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Gevorderd"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Wag asb."
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Maak boom oop"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Maak boom toe"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Skakel tussen plat- en groepsortering"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Swak keuse, probeer weer\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "U keuse? (verstek %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "U keuse? (verstek %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opsies: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Wil u aboot gebruik?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "U keuse? (verstek %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tseggies (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Duits"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spaans"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finnies"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Frans"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norweegs"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Pools"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russies"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sweeds"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "VK sleutelbord"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "VSA sleutelbord"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanies"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenies (oud)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenies (tikmasjien)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenies (Foneties)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latyns)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgies"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armenies (Foneties)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaars"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliaans (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarussies"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Switsers (Duitse uitleg)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Switsers (Franse uitleg)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tseggies (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Duits (geen dooie sleutels)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Deens"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (VSA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norweegs)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (VSA)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estoniaans"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgies (Russiese uitleg)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgies (Latynse uitleg)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grieks"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hongaars"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroaties"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelies"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelies (Foneties)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranies"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Yslandies"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiaans"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japanees 106 sleutels"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreaanse sleutelbord"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latyns-Amerikaans"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanies AZERTY (oud)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanies AZERTY (nuut)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanies \"nommerry\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanies \"foneties\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvies"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Masedonies"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Nederlands"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Pools (QWERTY uitleg)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Pools (QWERTZ uitleg)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugees"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadees (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romanies (QWERTZ)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romanies (QWERTY)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russue (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Sloveens"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaaks (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaaks (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serwies (Kirillies)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabel"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai sleutelbord"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik sleutelbord"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turks (tradisionele \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turks (moderne \"Q\" modem)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukranies"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "VSA internasionale sleutelbord"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vi�tnamees \"nommerry\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslaavs (latynse uitleg)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Sirkul�re heg %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Verwyder eers die logiese volumes\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Muis"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generiese PS2 wielmuis"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 knop"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generiese 2-knop muis"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generies"
-
-#
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Wiel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriaal"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generiese 3-knop muis"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Reeks (seriaal)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Muis (seriaal, ou C7 tipe)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmuis"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 knoppies"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 knoppies"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "niks"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Geen muis"
-
-#
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Toets asb. die muis"
-
-#
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Om die muis te aktiveer"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEEG DIE WIEL!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finnies"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Volgende ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Vorige"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Is dit korrek?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Konnekteer aan die internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Die mees algemene metode vir ADSL is om  pppoe te gebruik.\n"
-"Daar is wel sekere konneksie wat pptp of DHCP gebruik.\n"
-"Indien u nie weet nie, kies 'gebruik pppoe'."
-
-#: ../../network/adsl.pm_.c:22
-#, fuzzy
-msgid "Alcatel speedtouch usb"
-msgstr "speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "gebruik dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "gebruik pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "gebruik pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Watter DCHP-kli�nt wil u gebruik?\n"
-"Verstek is dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Geen ethernetkaart is op die stelsel gevind nie.\n"
-"Ek kan nie hierdie konneksietipe opstel nie."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Kies die netwerkkoppelvlak"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "geen netwerkkaart gevind nie"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Stel netwerk op"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Tik asb die rekenaarnaam in.\n"
-"Sekere DHCP-bedieners benodig die rekenaarnaam.\n"
-"Dit moet 'n volle gekwalifiseerde naam wees,\n"
-"bv. ``myne.mywerk.co.za''."
-
-#
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Rekenaarnaam"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Netwerkkonfigurasie-assistent"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Eksterne ISDN-kaart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interne ISDN-kaart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Watter tipe is u ISDN-konneksie?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nuwe konfigurasie (Ligte ISDN/isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Ou konfigurasie (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN Konfigurasie"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Kies u internetdiensvoorsiener.\n"
-"Indien nie in die lys nie kies Ongelys"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europese protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europese protokol (EDSS1)"
-
-#
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol vir die res van die w�reld"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol vir die res vd w�reld \n"
-" geen D-Kanaal nie (bruikhuurlyne)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Watter protokol verlang u?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Oor watter tipe kaart beskik u?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ek weet nie"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Indien u 'n ISA-kaart het, behoort die waardes op die volgende skerm reg te "
-"wees.\n"
-"\n"
-"Indien u 'n PCMCIA kaart het, moet u die IRQ en I/O van u kaart weet.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Aborteer"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Gaan voort"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Wat is u ISDN-kaart?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ek het 'n ISDB PCI-kaart gevind, maar ek ken nie die tipe nie. Kies asb.'n "
-"PCI-kaart op die volgende skerm."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Geen ISDN PCI-kaart gevind nie. Kies asb. een op die volgende skerm."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opbelopsies"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Konneksienaam"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefoonnommer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Aantekenkode"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skriptipe"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminaaltipe"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domeinnaam"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Eerste DNS-bediener (opsioneel)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Tweede DNS-bediener (opsioneel)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"U kan diskonnekteer or herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"U kan u konneksie herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "U is tans aan die internet gekonnekteer."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"U kan aan die internet konnekter of u konneksie herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "U is nie tans aan die internet gekonnekteer nie."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Konnekteer"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Diskonnekteer"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Stel netwerk op"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internetkonneksie en konfigurasie"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ons gaan nou die %s konneksie herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ons gan nou die %s konneksie konfigureer.\n"
-"\n"
-"\n"
-"Drk OK om voort te gaan."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Omdat u  netwerk installasie doen, is u netwerk aslreeds opgestel.\n"
-"Kliek op OK om hierdee konfigurasie te behou, of op Kanselleer om u Internet "
-"& Netwerkkonneksie te herkonfigureer.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Welkom by die Netwerkkonfigurasie-assistent\n"
-"\n"
-"Ons gaan nou u internet/netwerkkonneksie konfigureer.\n"
-"Iniden u nie outobespeuring verlang nie, deselekteer die opsie.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Kies die profiel om te konfigureer"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Gebruik outobespeuring"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Toestel word afgetas..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normale modemkonneksie"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "Op poort %s bespeur"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN konneksie"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s bespeur"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL konneksie"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "op koppelvlak %s bespeur"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabelkonneksie"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Kabelkonneksie bespeur"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN konneksie"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet kaart(e) bespeur"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Kies die konneksie wat u wil konfigureer"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"U het meer as een internetkonneksiemetode opgste.\n"
-"Kies die een wat u verlang.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internetkonneksie"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Wil u die konneksie met herlaaityd aanskakel?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Daar was 'n probleem met die herlaai van die netwerk.\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Geluk, die netwerk en internetkonfigurasie is voltooi.\n"
-"\n"
-"Die kongiurasie gaan op u stelsel toegepas word.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Nadat dit klaar is, sal dit beter wes om u X-omgewing te herlaai\n"
-"om die rekenaarnaamveranderingprobleem te voorkom."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"WAARSKUWING: Die toestel is alreeds opgestel om aan die internette "
-"konnekteer.\n"
-"U kan die toestel net so aanvaar.\n"
-"Veranderinge aan onderstaande velde sal hierdie konfigurasie oorskryf."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Gee asb die IP-konfigurasie vir hierdie rekenaar.\n"
-"Elke item moet as 'n IP-adres in dotdesimalenotasie\n"
-"(1.2.3.4) gegee word."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigureer netwerktoestel %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr "(drywer %s)"
-
-#
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adres"
-
-#
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmasker"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Outomatiese IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adres moet in 1.2.3.4. formaat wees"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Tik asb die rekenaarnaam in.\n"
-"Dit moet 'n volle gekwalifiseerde naam wees,\n"
-"bv. ``myne.mywerk.co.za''.\n"
-"U mag ook die netwerkhek byvoeg indien daar een is"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS bediener"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Netwerkportaaltoestel"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Instaanbedienerkonfigurasie"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP instaanbediener"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP instaanbediener"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Volg netwerkkart ID. (nuttig vir skootrekenaars)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Instaanbediener moet begin met http://"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Instaanbediener moet begin met ftp://"
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internetkonfigurasie"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Wil u nou aan die internet konnekteer?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Konneksie word getoets..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Die stelsel is nou aan die internet gekonnekteer."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Vir sekuriteitsredes, word u nou gediskonnekteer."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Die tselsel blyk nie aan die internet gekonnekteer te wees nie.\n"
-"Probeer om u stelsel te herkonfigureer."
-
-#
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konneksiekonfigurasie"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Vul asb. die velde hieronder in"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kaart IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kaartgeheue (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kaart I/O"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kaart IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kaart IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "U persoonlike telefoonnommer"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Voorsienernaam (bv voorsiener.co.za)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Voorsiener se telefoonnommer"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Voorsiener DNS 1 (opsioneel)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Voorsiener DNS 2 (opsioneel)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Kies u land"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Belmetode"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Konneksiespoed"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Konneksie tydlimiet (in sekondes)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Gebruikerskode"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Wagwoord"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "heg het gefaal"
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Ekstensiepartisie word nie op hierdie platform ondersteun nie"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"U het 'n gat die partisietabel maar ek kan dit nie gebruik nie.\n"
-"Die enigste oplossing is om die prim�re partisie te skuif sodat die gat\n"
-"langs die ekstensie partisies is"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Herstel van l�er %s het gefaal: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Korrupte rugsteunl�er"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fout in die skryf van %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Iets vrots gebeur op u hardeskyf.\n"
-"'n Dataintegriteitstoets het misluk.\n"
-"Dit beteken dat enigiets wat na u hardeskyf geskryf word as gemors sal "
-"eindig."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "benodig"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "belangrik"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "baie oulik"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "oulik"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "moontlik"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Generiese Unixdrukstelsel (Common Unix Printing System) "
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - Nuwe generasie LPR"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Lyndrukkerdiensprogram"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Druk sonder drukkertou"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Plaaslike drukker"
-
-#
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Eksterne drukker"
-
-#
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Eksterne CUPS-drukker"
-
-#
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Eksterne LPD-drukker"
-
-#
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Netwerkdrukker (sok)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Eksterne Netware-drukker"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Tik  drukkertoestel URI in"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Pyk drukstuk na program"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Onbekende model"
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Plaaslike drukker"
-
-#
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Eksterne drukker"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Fout in die skryf van %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(op %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(op hierdie rekenaar)"
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS-bediener IP:"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Verstek)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Kies drukkerkonneksie"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hoe is die drukker gekonekteer?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier\n"
-"op te stel nie; drukkers wod outomaties bespeur.\n"
-"Indien u twyfel, kies \"Eksterne CUPS-drukker\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Konfigurasie"
-
-#
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Verwyder CUPS-bediener"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adres moet iets soos 192.168.1.20. lyk"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Die poortnommer moet  heeltal wees."
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-bediener IP:"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Poort"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Outomatiese CUPS konfigurasie"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Toestel word afgetas..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Toets poorte"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Voeg drukker by"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Plaaslike drukker"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Eksterne drukker"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Gebruik outobespeuring"
-
-#
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s bespeur"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Tik  drukkertoestel URI in"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Plaaslike drukker"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Tik  drukkertoestel URI in"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Kleurkonfigurasie"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Installeer pakket %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Installeer pakket %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Eksterne lpd drukkeropsies"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Om 'n eksterne lpd drukkertou te gebruik,moett die naam\n"
-"van die drukkkerbediener en die naam van die drukkertou\n"
-"voorsien word."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Eksterne bedienernaam"
-
-#
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Eksterne bedienernaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Eksterne drukkernam ontbreek!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) drukkeropsies"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Om na 'n SMB drukker te druk moet u die volgende voorsien:\n"
-"SMB rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP rekenaarnaam\n"
-"nie); moontlik die IP adres van die drukkerbediener; die drukkernaam; \n"
-"toepaslike gebruikerskode en wagwoord; werkgroepnaam."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB-bedienernaam"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB-bediener IP:"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Drukkernaam:"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Werkgroep:"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "�f die bedienernaam �f die bediener-IP moet verskaf word!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "SAMBA-deelnaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare drukkeropsies"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Om na 'n Netware drukker te druk moet u die volgende voorsien:\n"
-"Netware rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP\n"
-"rekenaarnaam nie); moontlik die IP adres van die drukkerbediener;\n"
-"die drukkernaam; toepaslike gebruikerskode en wagwoord."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Drukkerbediener"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Drukkertounaam"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP-bedienernaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP-tounaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Sokdrukkeropsies"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Om aan 'n sokdrukker te konnekteer, moet u die rekenaarnaam van die\n"
-"drukker voorsien en dalk ook 'n poortnommer voorsien.\n"
-"Met HP JetDirect-bedieners is die poortnommer gewoonlik 9100,\n"
-"maar dit mag anders wees met ander bedieners. Raadpleeg die handleiding\n"
-"wat saam met die hardeware gekom het."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Drukkerbedienernaam"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Drukkerbedienernaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Drukkertoestel URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"U kan die URI om die drukker te bereik direk spesifiseer. Die URI moet in "
-"CUPS- of Foomatic-formaat wees. Nie alle UTI-tipes moet deur al die "
-"spoelprogramme ondersteun nie."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "'n Geldige URI moet verskaf word!"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Elke drukker benodig  naam (bv. lp).\n"
-"Die Beskrywing- en Liggingvelde is opsioneel.\n"
-"Hulle dien as inligting vir gebruikers."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Drukkernaam"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Beskrywing"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Ligging"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Drukkerdata word gelees..."
-
-#
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Is dit korrek?"
-
-#
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Drukkermodelkeuse"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Oor watter tipe drukker beskik u?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Internetkonfigurasie"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opsie %s moet 'n heeltal wees!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opsie %s moet 'n nommer wees"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opsie %s is buite bereik!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Wil u hierdie drukker (\"%s\")\n"
-"die verstek drukker maak?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Toetsbladsye"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Geen toetsbladsye"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Druk"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standaard toetsbladsy"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternatiewe toetsbladsy (Lettergrootte)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternatiewe toetsbladsy (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Fototoetsbladsy"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Druk toetsbladsy(e)"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Toetsbladsy(e) word gedruk..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Toetsbladsy(e) is na die drukkerstelsel gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
-"Drukstatus:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Toetsbladsy(e) is na die drukker gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Het dit reg gewerk?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Geen drukker"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Sluit af"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Netwerk op pad af"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Netwerk op pad af"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Drukkeropsies"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Dra drukkerkonfigurasie oor"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD en LPRng ondersteun nie IPP-drukkers nie.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Moet nie drukkers oordra nie"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Oordrag"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nuwe drukkernaam"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s word oorgedra..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Konfigureer drukker"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Konneksie word begin..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Stel netwerk op"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor is nie opgestel nie"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Stel netwerk op"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Watter drukkerstelsel verlang u?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Hoog"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Parano�es"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Watter drukkerstelsel verlang u?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Installeerde sagteware word deursoek..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "LPRng word verwyder..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "LPD word verwyder..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Kies drukkerspoelprogram"
-
-#
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Watter drukkerstelsel (spoelprogram) verlang u?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigureer drukker"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Installeer pakket %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Drukkeropsies"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Konfigureer drukker"
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Wil u 'n drukwerk nou konfigureer?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Drukkerstelsel:"
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Drukker"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Hier is die bestaande drukkertoue.\n"
-"U kan byvoeg or verwyder soos nodig."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Hier is die bestaande drukkertoue.\n"
-"U kan byvoeg or verwyder soos nodig."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Stel netwerk op"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normale modus"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Wil u die konfigurasie toets?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Drukker %s: %s %s\n"
-"Wil u hierdie drukker verander?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Gaan voort!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Drukkerkonneksietipe"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Drukkernaam,. beskrywing, ligging"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Drukkervervaardiger, model, drywer"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Drukkervervaardiger, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Maak hierdie die verstekdrukker"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Druk toetsbladsy(e)"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Wil u die konfigurasie toets?"
-
-#
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Verwyder drukker"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Verstek drukker"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Drukker \"%s\" is nou die verstekdrukker"
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Wil u die werklik die drukker verwyder?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Instaanbedienerkonfigurasie"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Welkom by die proksiekonfigurasienutsprogram.\n"
-"\n"
-"Hier kan u die HTTP en FTP-instaanbedieners\n"
-"opstel met of sonder aantekenkodes en wagwoorde\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Poort"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Instaanbediener moet begin met http://"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Die poortgedeelte moet numeries wees"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Vul asb. die FTP-instaanbediener inligting in\n"
-"Los dit oop indien u nie  FTP-instaanbediener verlang nie"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Instaanbediener moet begin met ftp://"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Gebruikerskode"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Herhaal wagwoord"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Geen wagwoord"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Die wagwoorde stem nie ooreen nie. Probeer weer!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan nie 'n partisie by geformatteerde RAID md%d byvoeg nie"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan nie l�er %s skryf nie"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid het gefaal"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid het gefaal. Dalk is 'raidtools' nie beskikbaar nie."
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nie genoeg partisies vir RAID vlak %d nie\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Loop die ALSA (Gevorderde Linux Klankargitektuur) klankstelsel"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron is skeduleerder vir periodiese instruksies."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd word gebruik om battery status te monitor en dit dan te log via "
-"syslog.\n"
-"Dit kan ook gebruik word om die rekenaar af te bring wanneer die battery "
-"swak is."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Loop instruksies deur 'at' geskeduleer op die tyd deur 'at' gespesifiseer. "
-"Loop ook instruksiebondels wanneer die stelsellas laag genoeg is."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron is die standaard UNIX program om gebruikergespesifiseerde programme\n"
-"op periodies geskeduleerde tye te loop. vixie cron voeg addisionele "
-"funksionaliteit\n"
-"by die standaard UNIX cron, insluitende beter sekuriteit en 'n kragtiger "
-"konfigurasie."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM verleen muisvermo�ns aan teksgebaseerde Linuxapplikasies soos\n"
-"Midnight Commander. Dit laat muisgebaseerde knip-en-plak aksies op die\n"
-"konsole toe asook opspringkieskaarte."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache is 'n WWW-bediener.\n"
-"Dit kan HTML-l�ers uitstuur en CGI's hanteer"
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Die internetsuperbedienerdiensprogram (gewoonlik inetd genoem) laai 'n\n"
-"verskeidenheid internetdienste soos nodig. Dit is gewoonlik verantwoordelik "
-"vir\n"
-"telnet, ftp, rsh en rlogin. As inetd gesper word, sper dit ook die dienste "
-"waarvoor\n"
-"inetd verantwoordelik is."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Hierdie pakket laai die sleutelbordkaart soos dit in /etc/sysconfig/"
-"keyboard\n"
-"opgestel is. Dit kan vernader word met die kbdconfig nutsprogram. U moet "
-"dit\n"
-"op meeste rekenaars ongesper laat."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Outobespeuring en hardewarekonfigurasie met herlaaityd."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd is die drukkerdiensprogram en is nodig vir lpr om te funksioneer.\n"
-"Dit is 'n diens wat drukstukke na drukkers toe reguleer."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) is die domeinnaamdiens (DNS) wat gebruik word om\n"
-"rekenaarname na IP-adresse toe om te skakel."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Heg en ontheg all netwerkl�erstels (NFS), SMB (Lan Manger/Windows)\n"
-"en NCP (Netware) hegpunte."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiveer/Deaktiveer all netwerkkoppelvlakke wat opgestel is om by\n"
-"herlaaityf te begin."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS is 'n popul�re protokol vir l�erdeling oor TCP/IP netwerke.\n"
-"Hierdie diens voorsien NFS-bedienerfunksionaliteit. Dit word via\n"
-"die /etc/exports l�er opgestel."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS is 'n popul�re protokol vir l�erdeling oor TCP/IP netwerke.\n"
-"Hierdie diens vorosien die NFS-l�ersluitfunksionaliteit."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ondersteun die OKI-4W en aanpasbare WIN-drukkers"
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA is gewoonlik nodig om ondersteuning te verleen aan\n"
-"toestelle soos ethernet en modems in skootrekenaars. Dit sal nie\n"
-"gelaai word, behalwe as dit konfigureer is nie en dit is derhalwe\n"
-"veilig om op rekenaars te h� wat dit nie nodig het nie."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper bestuur RPC-konneksies wat deur protokolle soos NFS en NIS\n"
-"gebruik word. Portmap moet loop op rekenaars wat as bedieners vir hierdie\n"
-"protokolle, en ander protokolle wat die RPC meganisme gebruik, dien."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"POstfix is 'n E-posoordragagent (MTA). Dit is die program wat E-pos\n"
-"van een bediener na 'n ander oordra."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Stoor en herstel die stelselentropiepoel vir ho� kwaliteit,\n"
-"lukraaknommergenerasie."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Die 'routed' diensprogram hanteer outomatiese IP-roeteertabelopdatering\n"
-"via die RIP protokol. Alhoewel RIP baie gebruik word in klein netwerke, is\n"
-"meer komplekse protokolle nodig vir komplekse netwerke."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Die 'rstat' protokol laat gebruikers op 'n netwerk toe om\n"
-"werksverrigtinginligting oor enige rekenaar op die netwerk te onttrek."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Die 'rusers' protokol laat netwerkgebruikers toe om te bepaal wie\n"
-"aangeteken is op ander samewerkende rekenaars."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Die 'rwho' protokol laat eksterne gebruikers toe om te sien wie\n"
-"ingeteken is op 'n rkeneaar wat die 'rwho' diensprogram loop.  (Amper soos "
-"'finger')."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Laai die klankstelsel op u rekenaar"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog is die fasiliteit wat baie diensprogramme gebruik om boodskappe\n"
-"te log na 'n verskeidenheid logl�ers. Dit is altyd goed om syslog te loop."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Laai die drywers vir u USB-toestelle"
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Laai die X-fontbediener (dis nodig vir XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Kies watter dienste moet outomaties begin met herlaaityd."
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Druk"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Stelselmode"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Eksterne lpd drukkeropsies"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Datbasis"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Dienste"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "aktief"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "onaktief"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "met herlaai"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Toestand"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Protokol vir die res van die w�reld"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Internettoegang"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedia - Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Ontwikkeling"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Beheersentrum"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Netwerkkoppelvlak"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB-bedienernaam"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Speletjies"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Kundige"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "verpligtend"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Installeer pakket %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ek kan nie u partisietabel lees nie, dit is te korrup.\n"
-"Ek sal die nodige partisies skoonmak."
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Fout!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ek kan nie die nodige herlaaibeeld '%s' kry nie."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Outoinstallasiekonfigurasieprogram"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Outomatiese Stappe Konfigurasie"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Geluk!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Die floppie is sukselvol geskep.\n"
-"U kan nou weer 'n installasie uitspeel."
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Installasie"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Voeg 'n gebruiker by"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Teruglusl�er %s word geformateer"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Korrupte rugsteunl�er"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Korrupte rugsteunl�er"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Korrupte rugsteunl�er"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Pakketkeuse"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Verwyder tou"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Verwyder Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Gebruikerskode"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Toets asb. die muis"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Probeer asb. weer"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Probeer asb. weer"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Geen wagwoord"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN konneksie"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Kies drukkerkonneksie"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Wat is u sleutelborduitleg?"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Korrupte rugsteunl�er"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Toets asb. die muis"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Korrupte rugsteunl�er"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Netwerkkoppelvlak"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Gebruikerskode"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "gebruik hardeksyfoptimisasie?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "gebruik hardeksyfoptimisasie?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Wag"
-
-#
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Wiel"
-
-#
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Wiel"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Module opsies:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Stel l�erstelsels op"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opsies"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Korrupte rugsteunl�er"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Wat is u muistoestel?"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Korrupte rugsteunl�er"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Herstel vanaf floppie"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Wat is u muistoestel?"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Ander"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Installeer stelsel"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Herstel vanaf l�er"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Herstel vanaf l�er"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Aangepaste"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Vorige"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Toestand"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Korrupte rugsteunl�er"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Herstel vanaf l�er"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Teks"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Kies pakkette om te installeer"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Korrupte rugsteunl�er"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Korrupte rugsteunl�er"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Korrupte rugsteunl�er"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Stoor in l�er"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Toets asb. die muis"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Konfigurasie"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Sluit konfigurasie af"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Stel l�erstelsels op"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s installasie het gefaal a.g.v. hierdie fout: "
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s is nie gevind nie"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Klaar"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formatteer floppie"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Berei installasie voor"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "Laai dit"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "beperk"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formateer partisies"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "De�nstallasie van RPMs"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Sluit konfigurasie af"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Hegpunt"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Kies die partisies om te formatteer"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Kantoor"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Aborteer"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Drukker"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Installeer stelsel"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Selekteer lOer"
-
-#
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Verwyder drukker"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Beginboodskap"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Installasie"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Verlaay installasie"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Internetkonneksiedeling"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetkonneksiedeling is ontsper"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans aktief.\n"
-"\n"
-"Wat wil u doen?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "deaktiveer"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "ignoreer/sien oor"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "herkonfigureer"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Bedieners word gedeaktiveer..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetkonneksiedeling is gedeaktiveer"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetkonneksiedeling is gesper"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans gedeaktiveer.\n"
-"\n"
-"Wat wil u doen?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "Aktiveer"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Bedieneers word aktiveer..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetkonneksiedeling is geaktiveer"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Nou dat u internetkonfigurasie opgestel is,\n"
-"moet u die rekenaar opstel om dit te deel.\n"
-"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
-"stel.\n"
-"\n"
-"Wil u internetdeling opstel?\n"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Koppelvlak %s (met module %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Koppelvlak %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Geen ethernetkaart is op die stelsel gevind nie. Gebruik asb. die "
-"hardewarekonfigurasieprogram."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Netwerkkoppelvlak"
-
-#
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Daar is net een konfigureerde netwerkkaart op u stelsel.\n"
-"\n"
-"%s\n"
-"\n"
-"Ek gaan nou u LAN met daardie kaart opstel."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Kies asb. die netwerkkaart wat aan die loakel area netwerk gekoppel is."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor is nie opgestel nie"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Outomatiese CUPS konfigurasie"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS-bediener IP:"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Moontlike LAN-adresbotsing gevind in konfigurasie %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Vuurmuurkonfigurasie gevind!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Waarskuwing! 'n Bestaande vuurmuurkonfigurasie is bespeur. U sal dalk na "
-"dietyd self regstellings moet aanbring."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigurasie in aabou..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Skrips word konfigureer, sagterware installeer en bedieners afgeskop..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleme met Installasue van pakket %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Die opstelling van is alreeds gedoen, maar is tans gedeaktiveer."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Die opstelling is alreeds gedoen en is alreeds ook geaktiveer."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Geen internetkonneksiedeling is al gekonfigureer nie."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Internetkonneksiedelingkonfigurasie"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Internetkonneksiedeling"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netwerkkonfigurasie (%d toestelle)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profiel:"
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Vee profiel uit..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profiel om uit te vee..."
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nuwe profiel..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Bedienernaam:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internettoegang"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipe:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Portaal:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Koppelvlak:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfigureer internettoegang..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN-konfigurasie"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Drywer"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Koppelvlak"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Toestand"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Stel plaaslike netwerk op..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistent..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Pas toe"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Wag asb... Konfigurasie word toegpas"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Gekonnekteer"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nie gekonnekteer nieKabelkonneksie"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Konnekteer..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Diskonnekteer..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN konfigurasie"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Toestel %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Herlaaiprotokol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Gelaai tydens herlaaityd"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP-kli�nt"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "Aktiveer nou dadelik"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktiveer nou dadelik"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internetkonneksiekonfigurasie"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internetkonneksiekonfigurasie"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Konneksietipe:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameters"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Portaal"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernetkaart"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-Kli�nt"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Sekuriteitsvlak word gestel."
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Beheersentrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Kies die instrument wat u wil gebruik"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanadees (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Yslandies"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "seriaal"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "gebruik: keyboarddrake [--expert] [SleutelbordNaam]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Wat is u sleutelborduitleg?"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-"Wil u h� dat die 'BackSpace' sleutel moet uitvee in die konsole ('n 'Delete' "
-"terugstuur)?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Verander CDROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Dit asb. die instasllasie CDROM in die aandrywer en druk OK. Indien u nie\n"
-"hieroor beskik nie, druk Kanselleer om die intydse opgradering te vermy."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kon nie die intydse opgradering begin nie !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Gebruikerskode"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Beginboodskap"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Konfigurasie"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Welkom by die proksiekonfigurasienutsprogram.\n"
-"\n"
-"Hier kan u die HTTP en FTP-instaanbedieners\n"
-"opstel met of sonder aantekenkodes en wagwoorde\n"
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "skadu's"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Verlaat"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "interessant"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatering"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Kleurkonfigurasie"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Wat is u muistoestel?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "Geen 'serial_usb' gevind nie\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emuleer derde knop?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Selekteer 'n videokaart"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Herlaaitoestel"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Vuurmuurkonfigurasie"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Vuurmuurkonfigurasie"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Vuurmuur\n"
-"\n"
-"Kliek op Konfigureer om die standaard vuurmuur op te stel."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Kies u taal"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Kies installasieklas"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Hardeskyfdeteksie."
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Stel muistoestel op"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Kies u sleutelbord"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sekuriteit"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Stel l�erstelsels op"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formateer partisies"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Kies pakkette om te installeer"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installeer stelsel"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Voeg 'n gebruiker by"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Stel netwerk op"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigureer dienste"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Installeer herlaaistelsel"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Maar 'n herlaaiskyf"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Stel X op"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Installeer stelsel"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Verlaay installasie"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurasie is voltooi. Moet ons hierdie veranderinge na skyf skryf?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan nie %s oopmaak nie: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kon nie %s in skryfmode oopmaak nie: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Vuurmuurkonfigurasie"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Wag asb. installasie word voorberei"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Netwerkrekenaar (kli�nt)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS, SMB, Instaan- , SSH (Bedieners)"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kantoor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome werkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Nutsprogramme vir PalmPilot en/of Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Werkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Vuurmuur/Netwerkroteerder"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domeinnaam en Netwerk Informasie Bediener (DNS/NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kantoorprogramme: Woordverwerkers( kword, abiword), spreistate (kspread, "
-"gnumeric), PDF-sigprogramme, ens."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Klankprogramme: MP3- of MIDI-spelers, mengers, ens."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Boeke en HOWTO's oor Linux en Vrye Sagteware"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE werkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ens."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Hulpprogramme vir e-pos, netnuus, web, FTP en netpraat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Datbasis"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL of MySQL databasisbediener"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Hulpprogramme vir u rekenaarkonfigurasie te vergemaklik"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Klank"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Nutsprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "dokumentasie"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsole hulpprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix e-posbediener, Inn netnuusbediener"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetstasie"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimediastasie"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfigurasie"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Addisionele grafiese werkskerms (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Die K-werkskermomgewing (KDE), die basiese grafiese omgewing met 'n "
-"versameling bygaande hulpprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafiese omgewing"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Hulpprogramme vir die skep en brand van CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kantoorwerkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Bediener"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ens."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiese programme soos Die GIMP"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C en C++ ontwikkelingsprogrammateke, programme en insluitl�ers"
-
-#
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Netwerkrekenaarbediener"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-pos/Groepware/Netnuus"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Speletjiesrekenaar"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videospelers en -redigeerders"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Vermaak: Arkade, Bordspel, Strategie ens."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Stel hulpprogramme om e-pos en netnuus te lees en te stuur (pine, mutt, tin) "
-"en om ook die web deur te blaai."
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Aaaargivering, emulators, monitorprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Persoonlike finansies"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"'n Grafiese omgewing met  gebruikersvriendelike stel applikasies en "
-"werkskermhulpprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Kli�ntprogramme vir 'n verkeidenheid protokolle insluitende SSH"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetpoort"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Klank- en videospelers/redigeerders"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Ander grafiese werkskerms"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-"Redigeerders. teksverwerkers, instruksiedoppe, l�ernutsprogramme, "
-"terminaalprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programme om u finansies te bestuur, soos GNUcash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Persoonlike Inligtingbestuur."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD Sny"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Wetenskaplike werkstasie"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Aborteer"
-
-#, fuzzy
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Geen"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Kies die verstek gebruiker:"
-
-#
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Pas toe/herlees drukkers"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "U kan die opsies vir module %s hier intik."
-
-#~ msgid "mount failed"
-#~ msgstr "heg het gefaal"
-
-#~ msgid "Low"
-#~ msgstr "Laag"
-
-#~ msgid "Medium"
-#~ msgstr "Medium"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "'n Aantal verbetering op heirdie sekuriteitsvlak, die hoof een is meer\n"
-#~ "sekuriteitswaarskuwings en -toetse."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Multimedia"
-
-#~ msgid "Boot mode"
-#~ msgstr "Herlaaimodus"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Kundige"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux beheer tyd in GMT (Greenwichmeridiaantyd) en vertaal dit dan\n"
-#~ "in u lokale tyd volgends die gekose tydsone."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Konnekteer aan die internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Diskonnekteer van die internet"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Konfigureer netwerkkonneksie (LAN or internet)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Na watter skyf wil u skuif?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Kies die pakkette wat u wil installeer"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Info"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome werkstasie"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server.  It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "Apache is 'n WWW-bediener.\n"
-#~ "Dit kan HTML-l�ers uitstuur en CGI's hanteer"
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) is die domeinnaamdiens (DNS) wat gebruik word om\n"
-#~ "rekenaarname na IP-adresse toe om te skakel."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Wat is u muistoestel?"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "Beskikbare NFS-gede�lde hulpbronne word gesoek"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "Beskikbare NFS-gede�lde hulpbronne van bediner %s word gesoek."
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "Beskikbare SAMBA-gede�lde hulpbronne word gesoek"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "Beskikbare SAMBA-gede�lde hulpbronnevan bediener %s word gesoek"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Verlaat"
-
-#~ msgid "Removable media"
-#~ msgstr "Verwyderbare media"
-
-#~ msgid "Active"
-#~ msgstr "Aktief"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Nee"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "'n Drukker, model \"%s\", is opgespoor op "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Plaaslikte drukkertoestel"
-
-#~ msgid "Printer Device"
-#~ msgstr "Drukkertoestel:"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "Toestel/L�ernaam ontbreek"
-
-#
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Drukkers op eksterne CUPS-bediener(s)"
-
-#
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Drukkers op eksterne CUPS-bediener(s)"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Stelselmode"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Ander"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Wat is u sleutelborduitleg?"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Kliek asb. op 'n partisie"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tipe:"
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Korrupte rugsteunl�er"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Stel X op"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Drukkertoestel:"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Kanselleer"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "OK"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Sluit af"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Konneksie word begin..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Konneksie word afgesluit..."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Die stelsel is nou ontkoppel."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Kies die grootte van die installasie"
-
-#~ msgid "Total size: "
-#~ msgstr "Totale grootte: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Wag asb.,"
-
-#~ msgid "Total time "
-#~ msgstr "Totale tyd "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Gebruik bestaande konfigurasie vir X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Watter toestel is die drukker aan gekoppel?\n"
-#~ "(let op dat /dev/lp0 ekwiwalent is aan LPT1:)\n"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Waarskuwing! Die netwerkkaart is alreeds opgestel. Ek gaan dit "
-#~ "herkonfigureer?"
-
-#~ msgid "New"
-#~ msgstr "Nuut"
-
-#~ msgid "Remote"
-#~ msgstr "Ekstern"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Kliek asb. op 'n partisie"
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr ""
-#~ "Indien bo-gelyste inskrywings nie die nodige inskrywing bevat nie, voeg "
-#~ "dit hier by:"
-
-#~ msgid "Shared resource"
-#~ msgstr "Gede�lde hulpbron"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Vaagheid (%s). Wees meer presies\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (verstek %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "U keuse? (Verstek %s tik 'none' vir geen)"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "kan nie /etc/sysconfig/autologin oopmaak vir lees nie: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Wil u die netwerk herlaai?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Stem u saam?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Ek gaan nou die netwerktoestel herlaai: \n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Ek gaan nou die netwerktoestel %s herlaai. Stem u saam?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Indien u spesifiek anders weet, is die gewone keuse \"/dev/hda\"\n"
-#~ "(prim�re meester IDE-skyf) of \"/dev/sda\" (eerste SCSI-skyf)."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr ""
-#~ "Konneksie tydlimiet (in sekondes) [ beta, nog nie ge�mplementeer nie ]"
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Kon nie \"%s\" die verstek drukker maak nie!"
-
-#
-#~ msgid "Test the mouse here."
-#~ msgstr "Toets die muis hier."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Kies voorkeurtaal vir installasie en stelselgebruik."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Kies die sleutelborduitleg uit die bostaande lys"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Selekteer:\n"
-#~ "\n"
-#~ "  - Afgemeet: Indien u vertroud genoeg is met GNU/Linux, kan u die "
-#~ "prim�re\n"
-#~ "  gebruik van u rekenaar kies. Sien onder vir details.\n"
-#~ "\n"
-#~ "  - Kundige: Indien u vlot is in GNU/Linux en 'n hoogs aangepaste "
-#~ "installasie wil\n"
-#~ "  doen, kan u die deur die gebruik van u rekenaar te kies.\n"
-#~ "  MOET ASB. NIE HIERDIE OPSIE KIES INDIEN U NIE WEET WAT U DOEN NIE."
-
-#, fuzzy
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Die verskillende opsies vir u rekenaar se gebruik (indien u \"Afgemeet"
-#~ "\" \n"
-#~ "of  \"Kundige\" sou kies) is die volgende:\n"
-#~ "\n"
-#~ "  - Normaal: Indien die rekenaar prim�r vir daaglikse kantoorgebruik is.\n"
-#~ "     Moenie programmeringspakette verwag nie.\n"
-#~ "\n"
-#~ "  - Ontwikkeling: Indien die rekenaar vir programontwikkel;ing gebruik "
-#~ "sal\n"
-#~ "     word. 'n Volledige stel kompileerders, saamstellers en ontfouters "
-#~ "sal \n"
-#~ "     opgesit word.\n"
-#~ "\n"
-#~ "  - Bediener: Indien die rekenaar prim�r 'n bediener sal wees, hetsy met "
-#~ "NFS,\n"
-#~ "     SMB, drukkerbediening, NIS magtiging ens.\n"
-#~ "     Moenie vensterstelsels soos KDE en GNOME verwag nie.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "U kan nou die pakketgroepe kies wat u wil installeer of opgradeer.\n"
-#~ "\n"
-#~ "DrakX sal dan kyk of daar genoegsame spasie is vir die volledige "
-#~ "installasie.\n"
-#~ "Indien nie sal u verwittig word. Indien u voortgaan, sal van die minder "
-#~ "belangrike\n"
-#~ "pakkette nie installeer word nie.Heel onder kan u die opsie \"Individuele "
-#~ "pakketkeuses\"\n"
-#~ "kies waarna u deur meer as 'n 1000 pakkette sal moet blaai....."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Indienu al die CDs in die bogenoemde lys het, kliek OK.\n"
-#~ "Indien u geen het nie, kliek Kanselleer.\n"
-#~ "Indien sekere CDs weg is, onselekteer hulle en kliek dan OK."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "U kan nou die opbelopsie invul. Indien u\n"
-#~ "twyfel kry die korrekte inligting van u ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Sleutel in:\n"
-#~ "\n"
-#~ "  - IP-adres: Indien u dit nie weet nie vra u netwerkadministrateur of "
-#~ "ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Netmasker: \"255.255.255.0\" is gewoonlik 'n goeie keuse. Indien u "
-#~ "twyfel,\n"
-#~ "     vra die netwerkadministrateur of ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Outomatiese IP: Indien u netwerk bootp of dhcp protokolle ondersteun, "
-#~ "kies\n"
-#~ "     hierdie opsie. In so 'n geval is 'n IP-adresinskrywing nie nodig "
-#~ "nie. Indien u\n"
-#~ "     twyfel, vra die netwerkadministrateur of ISP.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Indien u netwerk NIS gebruik, kies \"Gebruik NIS\". Indien u twyfel vra\n"
-#~ "die netwerkadministrateur."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "U kan nou die opbelopsie invul. Indien u\n"
-#~ "twyfel kry die korrekte inligting van u ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Indien u instaanbedieners wil gebruik, stel hulle hier op.. Indien u "
-#~ "twyfel vra\n"
-#~ "die netwerkadministrateur of ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "U kan 'n kriptografiese pakket installeer indien u internetkonneksie reg "
-#~ "opgestel is.\n"
-#~ "Kies eers die spie�l waar u die pakket vanaf wil aflaai en kies dan die "
-#~ "pakkette\n"
-#~ "om te installeer.\n"
-#~ "\n"
-#~ "Let wel: U moet 'n spie�l en pakkette selekteer n.a.l plaaslike wetgewing."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "U kan nou die 'root' wagwoord voorsien vir u Mandrake Linux stelsel.\n"
-#~ "Die wagworod moet twee keer ingevoer word en te verfi�er dat dit\n"
-#~ "korrek is.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is die administrateur van die stelsel en is die enigste gebruiker\n"
-#~ "wat toegelaat wiord om die stelselkonfigurasie te verander. In di� lig,\n"
-#~ "kies asb. die wagwoord sorgvuldig. Ongemagtigde gebruik van die root\n"
-#~ "rekening kan uitermatiglik nadelig wees vir die integriteit van die\n"
-#~ "stelsel. Die wagwoord moet alfanumeries wees en ten minste 8 karakters\n"
-#~ "lank. MOENIE die wagwoord �rens neerskryf nie. Moet dit nie te lank of "
-#~ "te\n"
-#~ "ingwikkeld maak nie, u moet dit met min moeite onthou."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "U mag nou een of meer gewone gebruikersrekeninge skep. Dit is in\n"
-#~ "teenstelling met die bevoorregte 'root' rekening. Elke "
-#~ "gebruikersrekening\n"
-#~ "sal oor sy eie voorkeure (grafiese omgewing, programstelling, ens.) en\n"
-#~ "tuisgids (waar hierdie instellings gestoor word) beskik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Derhalwe moet u in die stelsel intkeen met u eie gebruikerskode en slegs\n"
-#~ "'root' gebruik vir administratiewe doeleindes.\n"
-#~ "\n"
-#~ "Skep eerstens 'n rekening vir uself. Selfs indien u die enigste "
-#~ "gebruiker\n"
-#~ "op die stelsel sal wees, moet u NIE as 'root' vir u daaglikse gebruik\n"
-#~ "inteken NIE. 'n Onbruikbare stelsel kan net een tikfout ver weg wees.\n"
-#~ "\n"
-#~ "\n"
-#~ "Derhalwe moet u aanteken met die gebruikerskode wat u hier skep en "
-#~ "'root'\n"
-#~ "net vir admintratiewe doeleindes gebruik."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO en Grub hoof opsies is:\n"
-#~ "  - Herlaaitoestel: Stel die naam van die toestel (bv. hardeskyfpartisie\n"
-#~ "     wat die herlaaisektor bevat. Indien u spesifiek anders weet\n"
-#~ "     kies \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Wagperiode voor verstekbedryfstelsel gelaai word. Kies die syfer in\n"
-#~ "     tiendes van 'n sekonde at die herlaaistelsel moet wag.\n"
-#~ "     Hierdie is handig op stelsels wat onmiddelik die hardeskyf skop na "
-#~ "die\n"
-#~ "     sleutelbord geaktiveer is. Die herlaaistelsel sal nie wag nie indien "
-#~ "die\n"
-#~ "     wagperiode nul is.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Videomode: Kies die spesifieke VGA teksmode wat gebruik moet word "
-#~ "met\n"
-#~ "      herlaai. Die volgende waardes is beskikbaar:\n"
-#~ "      * normaal: selekteer normale 80x25 mode.\n"
-#~ "      * syfer: die ooreenstemmende teksmode."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO 'n herlaaiprogram vir SPARC. Dir kan GNU/Linux of enige ander\n"
-#~ "bedryfstelsel wat op u rekenar teenwoordig is, laai. Gewoonlik word "
-#~ "hierdie\n"
-#~ "bedryfstelsels reg bespeur en bygevoeg. Indien nie, kan u 'n inskrywing "
-#~ "maak\n"
-#~ "op hierdie skerm. Maak seker u kies die korrekte paramters.\n"
-#~ "\n"
-#~ "\n"
-#~ "U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die "
-#~ "nodige\n"
-#~ "inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe nodig om "
-#~ "die\n"
-#~ "betrokke bedryfstelsels te laai."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO hoofkeuses is:\n"
-#~ "  - Herlaaitoestel: Waar wil u die inligting om GNU/Linux te laai plaas? "
-#~ "Die beste is\n"
-#~ "gewoonlik om \"Eerste hardeskyfsektor (MBR)\" te kies.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Wagperiode voor verstekbedryfstelsel gelaai word. Kies die syfer in\n"
-#~ "     tiendes van 'n sekonde at die herlaaistelsel moet wag.\n"
-#~ "     Hierdie is handig op stelsels wat onmiddelik die hardeskyf skop na "
-#~ "die\n"
-#~ "     sleutelbord geaktiveer is. Die herlaaistelsel sal nie wag nie indien "
-#~ "die\n"
-#~ "     wagperiode nul is."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Dit is tyd om die X-vensterstelsel op te stel. Hierdie is die kern van\n"
-#~ "die GNU/Linux grafiese omgewing. Vir hierdie doeleindes, moet u 'n "
-#~ "videokaart\n"
-#~ "en monitor kies. Meeste van hierdie stappe is outomaties en u moet net\n"
-#~ "verifi�er of dit korrek is.\n"
-#~ "\n"
-#~ "\n"
-#~ "Na konfigurasie sal X outmaties gelaai word, behalwe as u DrakX "
-#~ "andersins\n"
-#~ "aans�. Indien die stelling u nie pas nie, kom terug en verander so veel\n"
-#~ "keer soos nodig."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Indien iets verkeerd is in die X-konfigurasie, gebruik hierdie opsies om\n"
-#~ "die X-vensterstelsel reg op te stel."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Indien u verkies om 'n grafiese intekenarea te kry, kies \"Ja\", "
-#~ "andersins \"Nee\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "U stelsel gaan nou herlaai.\n"
-#~ "\n"
-#~ "U nuwe Mandrake Linux stelsel sal outomaties laai. Indien u 'n ander\n"
-#~ " bedryfstelsel wil laai, lees die ekstra instruksies noukeurig deur."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Skryf /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formatteer almal"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Na formatering van alle partisies"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "alle data om hierdie partisies sal verloor word"
-
-#~ msgid "Reload"
-#~ msgstr "Herlaai"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Wil u 'n outoinstallasieskyf maak vir Linux replikasie?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL konfigurasie"
-
-#, fuzzy
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier\n"
-#~ "op te stel nie; drukkers wod outomaties bespeur.\n"
-#~ "Indien u twyfel, kies \"Eksterne CUPS-bediener\"."
-
-#~ msgid "Remote queue"
-#~ msgstr "Eksterne drukkertou"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Eksterne tounaam ontbreek!"
-
-#~ msgid "Command line"
-#~ msgstr "Instruksielyn"
-
-#~ msgid "Modify printer"
-#~ msgstr "Verander drukker"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Netwerkmonitor"
-
-#~ msgid "Profile "
-#~ msgstr "Profiel"
-
-#~ msgid "Connection Time: "
-#~ msgstr "Konneksietyd"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Internetkonneksie"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Internetdiskonneksie"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Diskonnekteer van die internet het misluk."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Diskonneksie van die internet sukssevol"
-
-#~ msgid "Connection complete."
-#~ msgstr "Konneksie suksesvol"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Verstek loopvlak"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Konfigurasiel�erinhoud is onverstaanbaar"
-
-#~ msgid "Adapter"
-#~ msgstr "Toestel"
-
-#~ msgid "Disable network"
-#~ msgstr "Sper netwerkstelsel"
-
-#~ msgid "Enable network"
-#~ msgstr "Aktiveer netwerk"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (of ADSL) konneksie"
-
-#~ msgid "Choose"
-#~ msgstr "kies"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "U kan die URI, om die drukker via CUPS te gebruik, direk spesifiseer"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Ja, druk ASCII toetsbladsy"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Ja, druk die PostScript toetsbladsy"
-
-#~ msgid "Paper Size"
-#~ msgstr "Papiergrootte"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Stoot papier uit na voltooiing?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint-dryweropsies"
-
-#~ msgid "Color depth options"
-#~ msgstr "Kleurdiepte opsies"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Druk teks as PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Korrigeer trapsgewyse teks?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Aantal bladsye per uitsetblad?"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Regs/Links kantlyne in punte (1/72 van 'n duim)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Bo/Onder kantlyne in punte (1/72 van 'n duim)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Ekstra GhostScriptopsies"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Ekstra teksopsies"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Omgekeerde bladsyorde"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Kies eksterne drukkerkonneksie"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Elke drukker benodig 'n naam (bv. lp)\n"
-#~ "Ander parameters soos 'n beskrywing en 'n ligging kan ook gegee word.\n"
-#~ "Wat is die drukker se naam en wat is die konneksietipe?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Elke drukkertou (waar drukstukke heengaan) het 'n naam nodig \n"
-#~ "(baie keer 'lp') and 'n gekoppelde spoelgids. Watter naam en\n"
-#~ "spoelgids moet gebruik word?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Tounaam"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spoelgids"
-
-#~ msgid "Disable"
-#~ msgstr "Deaktiveer"
-
-#~ msgid "Enable"
-#~ msgstr "Aktiveer"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Om 'n veiliger stelsel te bou, moet u \"Gebruik skadul�er\" \n"
-#~ "en \"Gebruik MD5 wagwoorde\" kies."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Indien u netwerk NIS wil gebruik, kies \"Gebruik NIS\" hier. Indien u "
-#~ "twyfel vra\n"
-#~ "die sysadmin.."
-
-#~ msgid "yellow pages"
-#~ msgstr "geelbladsye"
-
-#~ msgid "Light configuration"
-#~ msgstr "Ligte konfigurasie"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Voorsiener DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Voorsiener DNS 2"
-
-#, fuzzy
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Wil u nou aan die internet konnekteer?"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Selekteer lOer"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Konfigureer internetkonneksie"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Stel X op"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Stel netwerk op"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Hierdie skrip laai de nodige modules vir 'n USB-muis."
-
-#, fuzzy
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Nou dat u internetkonfigurasie opgestel is,\n"
-#~ "moet u die rekenaar opstel om dit te deel.\n"
-#~ "LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
-#~ "stel.\n"
-#~ "\n"
-#~ "Wil u internetdeling opstel?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Outomatiese afhanklikhede"
-
-#, fuzzy
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Stel X op"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Maar 'n herlaaiskyf"
-
-#~ msgid "Choice"
-#~ msgstr "Keuse"
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "U kan nou 'n paar diverse opsies vir u stelsel kies.\n"
-#~ "\n"
-#~ "  - Optimeer hardeskyf. Hierdie kan hardeskyfwerksverrigting verbeter, "
-#~ "maar is net\n"
-#~ "     vir kundige gebruikers bedoel. Sekere gebroke koppelvlakke kan data "
-#~ "ru�neer.\n"
-#~ "     Die bedryfstelsel kern het 'n swartlys van hardeskywe, maar indien u "
-#~ "onaangename\n"
-#~ "     verrassings wil voorkom los hierdie opsie uit.\n"
-#~ "\n"
-#~ "  - Sekuriteitsvlak: Lees die handleiding vir volledigheid, maar in "
-#~ "kort:\n"
-#~ "     Kies \"Medium\" indien u twyfel. Vir 'n hoogs veilige stelsel kies "
-#~ "\"Parano�es\",\n"
-#~ "     maar pasop: OP HIERDIE VLAK KLAN SELFS NIE 'ROOT' OP DIE KONSOLE\n"
-#~ "     AANTEKEN NIE. Vir 'root' toegang moet 'n gewone gebruiker eers "
-#~ "aanteken en dan\n"
-#~ "     \"su\". Dit is uitsluitlik vir 'n bediener bedoel.\n"
-#~ "\n"
-#~ "  - Presiese geheuegrootte: Daar is geen ongelukkig standaard metode om "
-#~ "die geheuegrootte\n"
-#~ "     uit die BIOS te bepaal nie. Soms sal Linux nie die grootte korrek "
-#~ "bepaal nie. In hierdie geval\n"
-#~ "     kan die korrekte grootte her gegee word. Let daarop dat 'n verskil "
-#~ "van 2-4MB normaal is.\n"
-#~ "\n"
-#~ "  - Outohegting van verwyderbare media: Indien u nie elke keer die "
-#~ "hegting per intik wil doen\n"
-#~ "     nie (van CDROMs, floppies, ZIpaandrywers ens.), selekteer hierdie "
-#~ "opsie.\n"
-#~ "\n"
-#~ "  - NumLock: Indien u NumLock wil aansit by herlaaityd, selekteer hierdie "
-#~ "opsie. Dit sal\n"
-#~ "     nie noodwendig NumLock onder X aansit nie."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Arbitr�re items"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Diverse vrae"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "U kan nie supermount in  ho� sekuriteitsvlak gebruik nie."
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Warskuwing: IN HIERDIE SEKURITEITSVLAK, kan ROOT nie by die KONSOLE "
-#~ "AANTEKEN nie.\n"
-#~ "OM 'root' te wees moet u eers as 'n gewone gebruiker aanteken en dan 'su'."
-#~ "Hierdie is spesifiek vir bedienergebruik. U is gewaarsku!"
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Wees versigtig, met NumLock aan sal heelwat sleutels as syfers eerder as "
-#~ "karakters na vore kom. (Bv 'n 'p' mag dalk '6' wees)"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Eerste DNS bediener"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Tweede DNS bediener"
-
-#~ msgid "loopback"
-#~ msgstr "teruglus"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Watter herlaaistelsel(s) verlang u?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Outoinstallasieskyf"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Soekj vir 'n modem?"
-
-#~ msgid "Configure local network"
-#~ msgstr "Stel netwerk op"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr "Plaaslike netwerk is alreeds opgestel: Wil u?"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Konfigureer tydsone"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(kan data korrupteer)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Aansit van NumLock met herlaai"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Bevestig wagwoord"
-
-#~ msgid "default"
-#~ msgstr "verstek"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Waarvoor word u stelsel gebruik?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Kies die grootte van die installasie"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Gebruik diskdrake"
-
-#
-#~ msgid "Customized"
-#~ msgstr "Gespesialiseerde"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Is u 'n kundige? U sal sal toegelaat word om kragtige, maar\n"
-#~ "gevaarlike keuses uit te oefen\n"
-#~ "\n"
-#~ "U sal vrae gevra word soos: \"Gebruik skaduwagwoorde?\"\n"
-#~ "Is u reg vir sulke vrae?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Gebruik skadul�er"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Gebruik MD5 wagwoorde"
-
-#~ msgid "Search"
-#~ msgstr "Soek"
-
-#~ msgid "Package"
-#~ msgstr "Pakket"
-
-#~ msgid "Tree"
-#~ msgstr "Boom"
-
-#~ msgid "Sort by"
-#~ msgstr "Gesorteer volgens"
-
-#~ msgid "Category"
-#~ msgstr "Kategorie"
-
-#~ msgid "Installed packages"
-#~ msgstr "Installeerde pakkette"
-
-#~ msgid "Available packages"
-#~ msgstr "Beskikbare pakkette"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Wys net eindnodes"
-
-#~ msgid "Expand all"
-#~ msgstr "Maak boom oop"
-
-#~ msgid "Collapse all"
-#~ msgstr "Maak boom toe"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Voeg pakketareas by"
-
-#~ msgid "Update location"
-#~ msgstr "Dateer ligging op"
-
-#~ msgid "Find Package"
-#~ msgstr "Soek pakket"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Soek pakket met l�er"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Skakel tussen installeerde en beskikbare"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Afhanklikhede word getoets"
-
-#
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Die volgende pakkette gaan verwyder word"
-
-#~ msgid "Regexp"
-#~ msgstr "Regex"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Watter pakket soek vir"
-
-#~ msgid "No match"
-#~ msgstr "Geen treffer"
-
-#~ msgid "No more match"
-#~ msgstr "Niks meer treffers nie"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake is in lae-geheue opstelling.\n"
-#~ "Ek gaan rpmdrake herlaai om soektogte toe te laat."
-
-#
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Watter l�er verlang u?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Wat soek vir?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Gee 'n (engelse) naam (bv. 'extra')"
-
-#~ msgid "Directory"
-#~ msgstr "L�ergids"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Geen cdrom beskikbaar nie (niks in /mnt/cdrom nie)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL van die l�ergids met die RPM's"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Vir FTP en HTTP, moet die pad vir die hdlist gegee word\n"
-#~ "Dit moet relatief tot bg. URL wees."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Voorsien asb. die volgende inligting"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s is lareeds in gebruik"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Die RPM's se basis word opgedateer"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Inskrywing %s gaan verwyder word"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Eindnodes word gesoek"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Soek van eindnodes neem 'n tydjie"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Ek het 'n ISDN-kaart gevind\n"
-
-#~ msgid "Other countries"
-#~ msgstr "Ander lande"
-
-#
-#~ msgid "In which country are you located ?"
-#~ msgstr "In watter land is u?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel modem"
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI modem"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "Indien u ADSL-modem 'n Alcatel is, kies Alcatel, andersins ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "moenie pppoe gebruik  nie"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (belangrik)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (baie oulik)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (oulik)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Aan watter seriaalpoort is u muis gekoppel?"
-
-#~ msgid "Czech"
-#~ msgstr "Tseggies"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovaaks"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Kon nie ipchains RPM m.b.v.  urpmi installeer nie."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Kon nie dhcp RPM m.b.v. urpmi installeer nie."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Kon nie linuxconf RPM m.b.v. urpmi installeer nie."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Kon nie bind RPM m.b.v. urpmi installeer nie."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "Kon nie caching-nameserver RPM m.b.v. urpmi installeer nie.  "
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Herkonfigureer plaaslike netwerk"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr "U rekenaar is opgestel om sy internet konneksie te deel.\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Internetkonneksiedeling is ontsper.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Konnekteer aan die internet met  gewone modem"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Konnekteer aan die internet met ISDN"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Konnekteer aan die internet met DSL (of ADSL)"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Konnekteer aan die internet met kabel"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "Tyd, in sekondes, van onaktiwiteit voor diskonneksie.\n"
-#~ "Los oop om di� funksie te sper."
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Duitsland (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Wat wil u doen?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Installasie/Redding"
-
-#~ msgid "Rescue"
-#~ msgstr "Redding"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Watter partisietipe verlang u?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Selekteer:\n"
-#~ "\n"
-#~ "  - Afgemeet: Indien u vertroud genoeg is met GNU/Linux, kan u die "
-#~ "prim�re\n"
-#~ "  gebruik van u rekenaar kies. Sien onder vir details.\n"
-#~ "\n"
-#~ "  - Kundige: Indien u vlot is in GNU/Linux en 'n hoogs aangepaste "
-#~ "installasie wil\n"
-#~ "  doen, kan u die deur die gebruik van u rekenaar te kies.\n"
-#~ "  MOET ASB. NIE HIERDIE OPSIE KIES INDIEN U NIE WEET WAT U DOEN NIE."
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "U kan nou kies watter partisie(s) gebruik kan word om Mandrake Linux\n"
-#~ "op te installeer indien hulle reeds bestaan (geskep uit 'n vorige "
-#~ "installasie,\n"
-#~ "of met 'n ander partisieprogram). In ander gevalle moet die partisies nog "
-#~ "geskep\n"
-#~ "word. Hierdie operasie bestan uit die logiese verdeling van die hardeskyf "
-#~ "in\n"
-#~ "aparte bruikbare areas\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u nuwe partisies moet skep, gebruik \"Outo-allokasie\" om "
-#~ "outomaties\n"
-#~ "partisies vir Linux te skep. U kan die skyf vir partisionering selekteer "
-#~ "deur\n"
-#~ "op \"hda\" te kliek vir die eerste IDE hardeskyf, hdb vir die tweede of "
-#~ "\"sda\"\n"
-#~ "vir die eerste SCSI skyf ens.\n"
-#~ "\n"
-#~ "\n"
-#~ "Twee algemene partisies is die \"root\" partisie (/), wat die wortel is\n"
-#~ "van die l�ergidsstelsel, en /boot, wat die nodige l�ers bevat om die\n"
-#~ "bedryfstelsel aan die gang te kry wanneer die rekenaar aangesit word.\n"
-#~ "\n"
-#~ "\n"
-#~ "Omdat die gevolge van hierdie proses onomkeerbaar is, kan partisionering "
-#~ "baie\n"
-#~ "intimiderend en stresvol vir die onervare gebruiker wees. DiskDrake maak "
-#~ "di�\n"
-#~ "proses heelwat makliker. Lees die dokumentasie en neem u tyd voor u "
-#~ "voortgaan.\n"
-#~ "\n"
-#~ "\n"
-#~ "U kan enige opsie gebruik deur die sleutelbord te gebruik. Navigeer deur "
-#~ "diepartisies met\n"
-#~ "Tab en die pyltjies. Wanneer 'n partisie gekies is, gebruik:\n"
-#~ "\n"
-#~ "- Ctrl-c om 'n partisie te skep (wanneer 'n le� partisie gekies is)\n"
-#~ "\n"
-#~ "- Ctrl-d om 'n partisie uit te vee\n"
-#~ "\n"
-#~ "- Ctrl-m om 'n partisie te heg\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Enige partisies wat nuut geskep is, moet eers formateer word voor "
-#~ "gebruik.\n"
-#~ "(Formateering beteken die skep van 'n lOerstelsel). U kan nou kies om "
-#~ "ook\n"
-#~ "bestaande partisies te herformateer en die data daarop te vernietig.\n"
-#~ "NOTA: Dit is nie nodig om alle bestaande partisies te herformateer nie,\n"
-#~ "veral indien daar data op is wat u wil hou. 'n Tipiese voorbeeld is /home."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Die gekose pakette gaan nou installeer word. Hierdie proses\n"
-#~ "sal 'n paar minute neem. Indien u 'n opgradering gekies, kan dit\n"
-#~ "nog langer neem voordat die opgradering begin."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Indien DrakX nie u muis kon vind nie, of as u wil sien\n"
-#~ "wat gedoen is, sal u moet die bg. lys van muistoestelle gepresenteer\n"
-#~ "word.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u met DrakX saamstem, spring na die afdeling wat u\n"
-#~ "verlang deur op die kierkaart links te kliek. Andersins kies\n"
-#~ "'n muistoetsel in die kieskaart wat u dink die beste klop met die\n"
-#~ "muis wat u het.\n"
-#~ "\n"
-#~ "In geval van 'n seriaalmuis, moet u ook vir DrakX die seriaalpoort\n"
-#~ "gee."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Hierdie afdeling is vir die konfigurasie van 'n lokaalareanetwerk\n"
-#~ "of 'n modem.\n"
-#~ "\n"
-#~ "Kies \"LAN\" en DrakX sal probeer om 'n Ethernetkaart in u rekenaar\n"
-#~ "te vind. PCI-kaarte sal heelwaarskynlik outomaties gevind en\n"
-#~ "inisialiseer word. Indien u 'n ISA-kaart het sal daar 'n kieslys\n"
-#~ "vertoon word waaruit u dan u kaart moet selekteer.\n"
-#~ "\n"
-#~ "\n"
-#~ "indien u Mandrake Linux installeer op 'n stelsel wat deel is van 'n\n"
-#~ "bestaande netwerk, sal due netwerk administrateur u alreeds met die\n"
-#~ "nodige inligting (IP adres, netmasker en rekenaarnaam) voorsien het.\n"
-#~ "Indien u 'n privaat netwerk opstel (sso by die huis), dan moet u die\n"
-#~ "adresse kies.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kies \"Uitbel met Modem\" en die internetkonneksie vir 'n modem\n"
-#~ "sal opgestel word. DrakX sal u modem probeer bepaal. Indien di� faal\n"
-#~ "sal u die modem en korrekte seriaalpoort moet selekteer."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "GNU/Linux kan verskeie drukkers gebruik. Elkeen van hierdie tipes\n"
-#~ "verlang 'n ander opstelling. Let asb. daarop dat die verstek drukkernaam "
-#~ "'lp' is.\n"
-#~ "U moet so 'n drukker skep.  U kan egter addisionele name bysit deur dit "
-#~ "met die '|' karakterte skei.\n"
-#~ "Derhalwe kan u dus die drukker 'n meer betekenisvolle naam ook toeken.\n"
-#~ "Die drukker met 'lp' in die naam sal die verstek drukker wees.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u drukker direk aan die rekenaar gekoppel is, selekteer\n"
-#~ "\"Lokale Drukker\". U moet dan die korrekte poort uitwys\n"
-#~ "en die gepaslike filter selekteer.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u 'n drukker om 'n ander Unix-rekenaar wil gebruik, kies\n"
-#~ "\"Eksterne lpd\". In hierdie geval moet u die naam van die drukkertou\n"
-#~ "op die ander rekenaar ken.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u toegang tot 'n SMB drukker (op 'n Windows-rekenaar) verlang,\n"
-#~ "moet u die SMB/NETBIOS naam (nie TCP/IP-naam nie) ken en moontlik ook "
-#~ "die\n"
-#~ "IP-adres. Daarby moet u ook 'n gebruikerskode, werkgroep en wagwoord en "
-#~ "die\n"
-#~ "drukkernaam voorsien. Dieselfde geld vir 'n Netware-drukker, behalwe dat "
-#~ "u\n"
-#~ "die werkgroep hoef te voorsien nie."
-
-# ../help.pm_.c:240 ../help.pm_.c:481 msgid ""
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Dit word sterk aanbeveel dat u \"Ja\" antwoord. Indien u Windows sou\n"
-#~ "herinstalleer, sal dit die herlaaisektor oorskryf. Indien u die die "
-#~ "herlaaiskyf\n"
-#~ "gemaak het nie, sal u nie weer in GNU/Linux kan inkom nie."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Draai u wiel!"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Vergeet van die veranderinge?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Wat is u muistipe?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "OUtomatiese resolusies"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Ek gaan nou probeer m die beskikbare resolusies te kry.\n"
-#~ "Die skerm sal 'n paar maal flits...\n"
-#~ "U kan die skerm afsit indien u wil, ek sal biep wanneer ek klaar is"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Ek kan probeer om al die beskikbare resolusies te kry (bv. 800x600).\n"
-#~ "Soms kan die rekenaar ophang.\n"
-#~ "Wil u probeer?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Geen geldige modes was gevind nie\n"
-#~ "Probeer 'n ander videokaart of monitor"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Outomatiese resolusie soektog"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "DHCP-kli�nt"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB-muis"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB-muis (2 knoppe)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB-muis (3+ knoppe)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB-muis"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB-muis (2 knoppe)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB-muis (3+ knoppe)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Busmuis"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft busmuis"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech busmuis"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB Muis (3 knoppe of meer)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A of beter (seriaal)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (seriaal)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (seriaal)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (seriaal)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Generiese Muis (seriaal)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft aanpasbaar (seriaal)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Generiese 3-knopmuis (seriaal)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (seriaal)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "Ek moet u netwerkkaart konfigureer om aan die internet te konnekteer."
-
-#~ msgid "nfs mount failed"
-#~ msgstr "NFS heg het gefaal"
-
-#~ msgid "Socket"
-#~ msgstr "Sok"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Kriptografie"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX sal konfigurasiel�ers maak vir beide XFree 3.3 en XFree 4.0.\n"
-#~ "By verstek sal die 4.0 bediener gebruik word indien u videokaart  "
-#~ "ondersteun. word\n"
-#~ "\n"
-#~ "Wil u XFree 3.3 behou?"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Stel LAN op"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "Moenie netwerk opstel nie"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Wil u die netwerk vir u stelsel opstel?"
-
-#~ msgid "Show less"
-#~ msgstr "Vertoon minder"
-
-#~ msgid "Show more"
-#~ msgstr "Vertoon meer"
-
-#, fuzzy
-#~ msgid "tie"
-#~ msgstr "koppel"
-
-#~ msgid "brunette"
-#~ msgstr "brunette"
-
-#~ msgid "girl"
-#~ msgstr "meisie"
-
-#~ msgid "woman-blond"
-#~ msgstr "blondine"
-
-#, fuzzy
-#~ msgid "automagic"
-#~ msgstr "automagic"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Wat is u sleutelborduitleg?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Soek PCMCIA-kaarte?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Soek vir %s-toestelle?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Wil u die opbelkonneksie (modem) konfigureer?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Soek vir PCI-toestelle?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Wortelpartisisie word gesoek."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr ""
-#~ "%s: Hierdie is nie 'n wortell�erstelsel nie, kies asb. 'n ander een."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Watter partisie moet u wortelpartisie wees?"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "U het geen Windows-partisies nie!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "U het nie genoeg spasie vir Lnx4win nie."
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#, fuzzy
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Welkom by %s die bedryfstelselkeuseprogram!\n"
-#~ "\n"
-#~ "Om die moontlikhede te vertoon, druk <TAB>.\n"
-#~ "\n"
-#~ "Om 'n spesifieke een te laai, tik die nodige naam en druk <ENTER> of wag\n"
-#~ "%ds en die verstek bedryfstelsel sal laai.\n"
-#~ "\n"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#, fuzzy
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Welkom by %s die bedryfstelselkeuseprogram!\n"
-#~ "\n"
-#~ "Om die moontlikhede te vertoon, druk <TAB>.\n"
-#~ "\n"
-#~ "Om 'n spesifieke een te laai, tik die nodige naam en druk <ENTER> of wag\n"
-#~ "%ds en die verstek bedryfstelsel sal laai.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "SILO hoofopsies"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Hier is die huidige SILO-inskrywings\n"
-#~ "U kan byvoeg or verwyder soos nodig."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Hierdie etiket is alreeds in gebruik"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "SILO installasie het gefaal a.g.v. hierdie fout: "
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX will probeer om eers te kyk vir een of meer bekende PCI\n"
-#~ "SCSI kaarte. Indien iets gevind word, en die drywers daarvoor\n"
-#~ "bekend is, sal dit outomaties bygevoeg word.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u 'n ISA SCSI kaart het, of 'n onbekende PCI SCSI kaart, of\n"
-#~ "geen SCSI kaart nie, sa; u gevra word of daar enige SCSI kaarte is.\n"
-#~ "Indien daar geen is nie, antwoord \"Nee\". Indien daar wel is, antwoord\n"
-#~ "\"Ja\" en 'n lys van kaarte sal gegee word waaruit u moet kies.\n"
-#~ "\n"
-#~ "\n"
-#~ "Na seleksie van die drywer, sal DrakX of vra vir opsies. Probeer eers\n"
-#~ "dat die drywer die hardeware ondervra; dit werk gewoonlik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien nie, moenie die dokumentasie van u hardeware vergeet nie; ook nie\n"
-#~ "enige inligting van Windows (indien u dit gennstalleer het). Hierdie is\n"
-#~ "opsies wat u die drywer moet verskaf."
-
-#~ msgid "Shutting down"
-#~ msgstr "Stelselafsluiting"
diff --git a/perl-install/share/po/ar.po b/perl-install/share/po/ar.po
deleted file mode 100644
index bad02e711..000000000
--- a/perl-install/share/po/ar.po
+++ /dev/null
@@ -1,10269 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 2000 Free Software Foundation, Inc.
-# Djaghlouli Kamel <djkamel@chez.com>, 2000.
-# Mohammed Gamal <f2c2001@yahoo.com>, 2002
-# Boujaj Mostapha Ibrahim <mboujaj@yahoo.de>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-08 02:00GMT\n"
-"Last-Translator: Mohammed Gamal <f2c2001@yahoo.com>\n"
-"Language-Team: ARABIC <ar@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "اعداد كل الرؤوس بشكل مستقل"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "استخدام امتداد Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "قم بإعداد البطاقة \"%s\" فقط (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "إعداد متعدد الرؤوس"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"نظامك يدعم الإعداد متعدد الرؤوس.\n"
-"ماذا تريد أن تفعل؟"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "بطاقة الشاشة"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "اختر بطاقة شاشة"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "إختر خادم X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "خادم X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "إختر مشغل X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "مشغل X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "أي اعداد لـXFree تريد؟"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"يمكن لبطاقتك الحصول على دعم للتسريع ثلاثي الأبعاد لكن فقط مع XFree %s.\n"
-"بطاقتك مدعومة عن طريق XFree %s التي يمكن أن تكون مدعومة بشل أفضل في الوضع "
-"ثنائي الأبعاد."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "يمكن لبطاقتك الحصول على دعم للتسريع ثلاثي الأبعاد مع XFree %s"
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s مع تسريع ثلاثي الأبعاد"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"يمكن لبطاقتك التمتع بدعم للرسوم ثلاثية الأبعاد مع XFree %s, \n"
-"لاحظ أن هذا الدعم تجريبي و قد يتسبب في ايقاف جهازك."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s مع دعم تجريبي للرسوم ثلاثية الأبعاد"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"يمكن لبطاقتك التمتع بدعم للتسريع ثلاثي الأبعاد لكن فقط مع XFree %s, \n"
-"لاحظ أن هذا الدعم تجريبي و قد يتسبب في ايقاف جهازك.\n"
-"بطاقتك مدعومة عن طريق XFree %s التي يمكن أن تكون مدعومة بشكل أفضل في وضعية "
-"الرسوم ثنائية الأبعاد."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (مشغل عرض التثبيت)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "إعداد XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "إختر حجم ذاكرة بطاقة الشاشة"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "إختر خيارات الخادم"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "إختر شاشة"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "الشاشة"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"المعاملان المهمان جدا هما نسبة الإنعاش الأفقي, و هي النسبة التي\n"
-"يتم فيها انعاش الشاشة كاملة, و الأهم هو نسبة التزامن الأفقي\n"
-"و التي في خلالها يتم عرض خطوط المسح.\n"
-"\n"
-"من *المهم جدا* أن لا تحدد نوع شاشة مع متوسط تزامن\n"
-"أكبر من مقدرة شاشتك لأنك بهذا قد تدمر شاشتك.\n"
-" اذا لم تكن متأكدا يمكنك اختيار اعدادات عادية."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "نسبة الإنعاش الأفقي"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "نسبة الإنعاش الرأسي"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "الشاشة غير معدّة"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "لم يتم اعداد بطاقة الشاشة حتى الآن"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "ام يتم اعداد دقة العرض حتى الآن"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "هل تريد تجربة الإعداد؟"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "تحذير: اختبار بطاقة العرض هذه قد يتسب في ايقاف جهازك"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "اختبار الإعداد"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"حاول تغيير بعض المعاملات"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "ظهر خطأ:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "المغادرة في %d ثوان"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "هل هذا هو الضبط الصحيح؟"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "ظهر خطأ, حاول تغيير بعض الماملات"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "دقة العرض"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "اختر دقة العرض و عمق الألوام"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "بطاقة الشاشة: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "خادم XFree86 :%s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "أكثر"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "موافق"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "وضعية الخبير"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "اظهار الكل"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "دقة العرض"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "لوحة المفاتيح: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "نوع الفأرة: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "جهاز الفأرة: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "الشاشة: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "تزامن الشاشة الأفقي: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "انعاش الشاشة الرأسي: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "بطاقة الشاشة: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "معرف بطاقة الشاشة: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "ذاكرة بطاقة الشاشة: %s كيلوبايت\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "عمق الألوان: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "دقة العرض: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "خادم XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "مشغل XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "جاري تجهيز تهيئة X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "ماذا تريد أن تفعل؟"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "تغيير الشاشة"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "تغيير بطاقة الشاشة"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "تغيير خيارات الخادم"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "تغيير دقة العرض"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "عرض المعلومات"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "اختبر مرة أخرى"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "خروج"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"هل تريد حفظ التغييرات؟\n"
-"الإعداد الحالي هو:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X عند بدء التشغيل"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"يمكنني جعل جهازك يبدأ X بشكل آلي بعد الإقلاع.\n"
-"هل تريد X أن بيدأ بعد إعادة تشغيل جهازك؟"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "يرجى اعادة تسجيل الدخول الى %s لتنشيط التغييرات"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "يرجى تسجيل الخروج ثم استخدم Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 لون )8 بت("
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ألف لون )15 بت("
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ألف لون )16 بت("
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 مليون لون )24 بت("
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 بليون لون )32 بت("
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 كيلوبايت"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 كيلوبايت"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 ميغابايت أو أكثر"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency that can do 1280x1024 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency that can do 1280x1024 at 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency that can do 1280x1024 at 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor that can do 1600x1200 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor that can do 1600x1200 at 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "القطاع اول من تجزئة الإقلاع"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "القطاع الأول من القرص (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "تثبيت SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "أين تريد تثبيت محمّل الإقلاع؟"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "تثبيت LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO مع قائمة نصية"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO مع قائمة رسومية"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "الإقلاع من DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "خيارات محمّل الإقلاع الرئيسية"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "محمّل الإقلاع المُستخدم"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "تثبيت محمل الإقلاع"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "جهاز الإقلاع"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA )لا يعمل مع أنظمة الـBIOS القديمة("
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "مدمج"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "مدمج"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "وضعية الفيدية"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "توقيت ما قبل اقلاع الصورة الافتراضية"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "???§?????????© ?§???³?????????±"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "كلمة المرور )ثانيةً("
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "تشديد خيارات سطر الأوامر"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "تشديد"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "قم بتنظيف /tmp عند كل إقلاع"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "حجم الذاكرة الدقيق عند الحاجة )تم ايجاد %d ميغابايت("
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "تمكين التشكيلات المتعددة"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "اكتب حجم الذاكرة بالميغابايت"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "خيار ``تشديد خيارات سطر الأوامر`` بدون قائدة من دون كلمة مرور"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "رجاء جاول مرة أخرى"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "كلمات المرور غير متطابقة"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "رسالة Init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "الوقت الأقصى لإقلاع النواة"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "تمكين الإقلاع من القرص المدمج؟"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "تمكين اقلاع OF؟"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "نظام التشغيل الافتراضي؟"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"ها هنا المخلات المختلفة.\n"
-"يمكنك اضافة مدخلات أخرى أو تغيير الموجودين."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "إضافة"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "انتهى"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "تعديل"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "ما نوع المدخل الذي تريد اضافته؟"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "لينكس"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "نظام آخر (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "نظام آخر (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "نظام آخر (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "صورة"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "الجذر"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "الحاق"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "للقراءة و الكتابة"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "الجدول"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Unsafe"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "عنوان"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "الإفتراضي"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "حجم Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "لا فيديو"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "ازل المدخل"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "غير مسموح بالعلامات الفارغة"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "يجب أن تحدد صورة النواة"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "يجب عليك تحديد تقسيم جذر"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "هذه العلامة مستخدمة مسبقا"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "تم ايجاد %s %s واجهات"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "هل عندك واحدة أخرى؟"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "هل لديك أي واجهات %s؟"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "لا"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "نعم"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "عرض معلومات العتاد"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "جاري تثبيت مشغل %s للبطاقة %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr ")الوحدة %s("
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "أي مشغل %s يجب أن استخدمه؟"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"في بعض الأحيان يحتاج مشغل %s معلومات اضافية لكي يعمل\n"
-"بشكل صحيح, الا أنه يمكنه العمل جيدا بدونها. هل تريد تحديد\n"
-"خيارات اضافية له أو تسمح للمشغل بالتحقق في جهازك\n"
-"عن المعلومات التي سيحتاجها؟ في بعض الأحيان, قد يتسبب التحقق في تعليق الجهاز, "
-"لكن\n"
-"لا يجب أن يتسبب ذلك في أي مشاكل."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "تحقق آلي"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "حدد الخيارات"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"يمكنك الآن اعطاء الخيارات للوحدة %s.\n"
-"الخيارات في هيئة ``name=value name2=value2 ...'' \n"
-"مثلا, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "خيارات الوحدة:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"فشل تحميل الوحدة %s.\n"
-"هل تريد المحاولة ثانية بمعاملات أخرى؟"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "الوصول الى برامج X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "الوصول الى أدوات rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "اسمح بـ\"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "الوصول الى ملفات الإدارة"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(تم اضافة %s مسبقا)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "كلمة المرور هذه بسيطة جدا"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "رجاءً قم بإعطاء اسم مستخدم"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "اسم المستخدم يجب أن يحتوي فقط على الحروف الصغيرة, الأرقام, `-' و `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "اسم المستخدم مُضاف مسبقا"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "اضف مستخدم"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"أدخل مستخدم\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "وافق على المستخدم"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "الاسم الحقيقي"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "اسم المستخدم"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "الغلاف"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "أيقونة"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "دخول آلي"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"يمكنني اعداد جهازك لتسجيل الدخول آليل لمستخدم ما.\n"
-"هل تريد استخدام هذه الميزة؟"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "اختر المستخدم الافتراضي:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "اختر مدير النوافذ الذي سيتم تشغيله:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "رجاء اختر لغة الاستخدام."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "يمكنكن اختيار لغات أخرى و التي ستكون متوفرة بعد التثبيت"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "الكل"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "اسمح لكل المستخدمين"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "مخصص"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "لا مشاركة"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "الحزمة %s يجب أن تُثبّت. هل تريد تثبيتها؟"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "يمكنك التصدير باستخدام NFS أو Samba. أي منهما تريد"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "الحزمة الضرورية %s مفقودة"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "إلغاء"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "شغّل userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"المشاركة لكل مستخدم تستخدم المجموعة \"fileshare\".\n"
-"يمكنك أن تستخدم userdrake لإضافة مستخدم في هذه المجموعة."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "مرحبا بالمخترقين"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "فقير"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "القياسي"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "مرتفع"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "مرتفع أكثر"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "مرتفع جدا"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "اختر مستوى الأمن"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "مستوى الأمن"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "إستخدم libsafe للملقمات"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "لا توجد مساحو كافية في /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "سطح المكتب"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "يمكنك تثبيت محمّل الإقلاع على التجزئة %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "لا توجد مساعدة لهذا حتى الآن.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "اعداد أسلوب الإقلاع"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_ملف"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/ملف/_خروج"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>خ"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "شاشة NewStyle التصنيفية"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "شاشة NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "شاشة تقليدية"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "شاشة Gtk+ التقليدية"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "شغّل Aurora عند الإقلاع"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "وضع Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "وضع Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"أنت تستخدم %s كمدير اقلاع حاليا.\n"
-"اضغط على تهيئة لتشغيل معالج الإعداد"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "إعداد"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "وضع النظام"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "شغّل X-Window عند بدء التشغيل"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "لا, لا أريد دخولا أليا"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "نعم, أريد دخولا آليا مع هذا )المستخدم, سطح المكتب("
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "موافق"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "لم يمكن فتح /etc/inittab للقراءة: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "غيغابايت"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "كيلوبايا"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "م.ب"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "تيرابايت"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d دقائق"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "دقيقة واحدة"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d ثوان"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "لا يمكنني غمل لقطات للشاشة قبل التجزئة"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "ستكون لقطات الشاشة موجودة بعد التثبيت في %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "فرنسا"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "كوستاريكا"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "بلجيكا"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "جمهورية التشيك"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "ألمانيا"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "اليونان"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "النرويج"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "السويد"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "هولندا"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "إيطاليا"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "النمسا"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "الولايات المتحدة"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "رجاء قم بعمل نسخة احتياطية من بياناتك أولا"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "اقرأ جيدا!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"اذا كنت تريد استخدام aboot, فلا تنسى أن تترك مساحة فارغة في\n"
-"بداية القرص (2048 قطاعات كافية)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "خطأ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "المعالج"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "اختر حدثا"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"لديك تجزئة FAT واحدة كبيرة\n"
-")يستخدم عامة عن طريق Microsoft DOS/Windows(.\n"
-"اقترح أن تغير حجم هذه التجزئة\n"
-")اضغط عليها ثم اختر \"تغيير الحجم\"("
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "فضلا اضغط على تجزئة"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "تفاصيل"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "التبديل"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "فارغ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "أخرى"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "أنواع أنظمة الملفات:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "عمل تجزئة"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "النوع"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "استخدم ``%s'' بدلا من ذلك"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "إلغاء"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "استخدم ``ازالة التجهيز'' أولا"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "بعد تغيير نوع التجزئة %s, فإنك ستسخر كل البيانات على التجزئة"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "إختر تجزئة"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "إختر شاشة"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "خروج"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "النتقال الى وضعية الخبير"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "الانتقال الى الوضع العادي"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "تراجع"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "هل تريد الاكمال على أي حال؟"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "الخروج بدون الحفظ"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "هل تريد الخروج بدون كتابة جدول التقسيم؟"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "هل تريد حفظ تعديلات /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "تحديد آلي"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "أمسح الكل"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "معلومات القرص الصلب"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "كل التجزئات الرئيسية مستخدمة"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "لا يمكنني اضافة أي تجزئة أخرى"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "لكي تمتلك تجزئات أكثر, يرجى الغاء تجزئة كي تتمكن من عمل تجزئة ممتدة"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "حفظ جدول التقسيم"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "استعادة جدول التقسيم"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "إنقاذ جدول التقسيم"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "إعادة تحميل جدول التقسيم"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "التجهيز الآلي للوسائط القابلة للإزالة"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "اختر ملف"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"جدول التقسيم المحفوظ ليس بنفس الحجم\n"
-"لا زلت تريد الإكمال؟"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "تحذير"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"أدخل قرصا مرنا في السواقة\n"
-"كل البيانات على القرص ستمحى"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "جاري محاولة انقاذ جدول التقسيم"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "معلومات مفصّلة"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "نقطة التجهيز"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "خيارات"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "تغيير الحجم"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "نقل"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "تنسيق"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "جهز"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "اضافة الى RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "اضافة الى LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "ازل التجهيز"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "ازالة من RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "ازالة من LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "تعديل RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "استخدام لـloopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "اعمل تجزئة جديدة"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "قطاع البداية: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "الحجم باليغابايت: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "نوع نظام المفات: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "نقطة التجهيز: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "التفضيل: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "هل تريد ازالة ملف loopback؟"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "غير نوع التجزئة"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "أي نظام ملفات تريد؟"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "جاري التغيير من ext2 الى ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "أين تريد تجهيز ملف loopback %s؟"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "أين تريد بجهيز الجهاز%s؟"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"لم يمكن ازالة تعيين نقطة التجهيز نظرا لأن هذه التجزئة مستخدمة لـloop back.\n"
-"قم بإزالة الـloopback أولا"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "جاري حساب روابط نظام ملفات FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "جاري تغيير الحجم"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "هذا التقسيم غير قابل لتغيير الحجم"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "كل البيانات على هذه التجزئة يجب حفظها احتياطيا"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "بعد تغيير حجم التجزئة %s, فإن كل البيانات على هذه التجزئة ستفقد"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "اختر الحجم الجديد"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "الحجم الجديد بالميغابايت: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "أي قرص تريد نقله؟"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "القطاع"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "أي قطاع تريد نقله؟"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "نقل"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "جاري نقل التجزئة..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "اختر RAID موجود للاضافة"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "جديد"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "اختر LVM l,جود للاضافة"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "اسم LVM؟"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "هذه التجزئة لا يمكن استخدامها لـloopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "اسم ملف Loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "اعط اسم ملف"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "هذا الملف مستخدم من loopback أخرى, اختر ملفا آخر"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "الملف موجود مسبقا, هل تريد استخدامه؟"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "خيارات التجهيز"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "متنوعة"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "الجهاز"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "المستوى"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "حجم chunk"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "كن حذرا: هذه العملية خطيرة"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "أي نوع من التجزئة؟"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "جدول اتتقسيم للقرص %s سيتم كتابته الى القرص!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "ستحتاج الى اعادة التشغيل قبل أن يتم تفعيل التعديلات"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "بعد تهيئة التقسيم %s, فإن كل البيانات الموجودة على التجزئة ستفقد"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "جاري التهيئة"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "جاري تهيئة ملف loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "جاري تهيئة التجزئة %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "خبء الملفات"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "انقل الملفات الى تجزئة جديدة"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"الدليل %s يحتوي مسبقا على بعض البيانات\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "جاري نقل الملفات الى التجزئة الجديدة"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "جاري نسخ %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "جاري ازالة %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "التجزئة %s معروفة الآن بالإسم %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "الجهاز: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "حرف سواقة DOS: %s (مجرد تخمين)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "النوع: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "الاسم: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "البداية: قطاع %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "الحجم: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s قطاع"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "الاسطوانة %d الى %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "مجهز\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "غير مجهز\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "محمل\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "المستوى %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "حجم Chunk %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "أقراص RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "اسم ملف Loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "الحجم: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "الهندسة: %s اسطوانة, %s رأس, %s قطاع\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "معلومات: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "أقراص LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "نوع جدول التقسيم: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "على bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "الخيارات: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "مفتاح تشفير نظام الملفات"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "اختر مفتاح تشفير نظام الملفات"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "مفتاح التشفير هذا بسيط جدا (يجب أن يكون %d حرفا على الأقل)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "مفاتيح التشفير غير متطابقة"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "مفاتح التشفير"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "مفاتح التشفير (مرة أخرى)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "غيّر النوع"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "فضلا اضعط على وسيط"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "ابحث في أجهزة الخادم"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s تجهيز %s قد فشل"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "لا أعرف كيف أجهز %s في النوع %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "بسيط"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "خادم"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr ""
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "لا توجد مساحة كافية للتحديد الآلي"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr ""
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NIS  لا تسطيع ا ستعمال هذ ا البرنامج مع"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr "استمرّ بأيّة حال"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "استعمل  مكانا حرا"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr ""
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr ""
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "قبول"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "هل تريد فعلا مغادرة التثبيت؟"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "لوحة المفاتيح"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "رجاء, اختر لوحة المفاتيح."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "ترقية"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "رجاء اختر لغة نوع الفأرة."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "خادم NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "بطاقة  الصّوت ISA هل عندك عند"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "الفأرة"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "طابعة"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "التحقق"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "خادم LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "تخطي"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "إختر ملف"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "متقدم"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "هل تريد الضغط على هذا الزر؟ "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "الألمانية"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr ""
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "الإسبانية"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "الفنلندية"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "الفرنسية"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "النرويجية"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "البولندية"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "الروسية"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "السويدية"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "البلجيكية"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "البلغارية (صوتية)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "البلغارية (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "البيلاروسية"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "الدنماركية"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (سويدية)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "الإستونية"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "يوناني"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "المجرية (الهنغارية)"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "الكرواتية"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "العبرية"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "الآيسلاندية"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "الإيطالية"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr ""
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "اللاتفية"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "المقدونية"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr ""
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "البرتغالية"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "السلوفينية"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "التاميل"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "الأوكرانية"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr ""
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr ""
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr ""
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr ""
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr ""
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr ""
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr ""
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr ""
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr ""
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr ""
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr ""
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ولا واحد"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr ""
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "إنتهاء"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "التالي ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "معالج إعداد الشبكة"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "إعداد جديد (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "إعداد قديم (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "إنهاء"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "تابع"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr ""
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr ""
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "اتصل"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "اقطع الإتصال"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "قم بإعداد الإتصال"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "وصلة ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "وصلة LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "وصلة انترنت"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr ""
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr ""
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr ""
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr ""
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr ""
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr ""
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr ""
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr ""
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr ""
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr ""
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr ""
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr ""
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "إختر بلدك"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "سرعة الإتصال"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "الوقت الأقصى للاتصال (بالثواني)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr ""
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "فشل التحميل: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr ""
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr ""
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr ""
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr ""
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr ""
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "طابعة محلية"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "طابعة بعيدة"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr ""
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr ""
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "طابعة شبكة (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr ""
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr ""
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr ""
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "الطابعات المحلية"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "الطابعات البعيدة"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ""
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr ""
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "على خادم CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr " CUPS اعدادات"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "الخادم CUPS حدّد"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "عنوان IP لخادم CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "البوابة"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "تهيئة CUPS آلية"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "أضف طابعة جديدة"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "طابعة محلية"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "تحقق من الطابعات آليا"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "تحقق آلي"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "تم التحقق من %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr ""
-
-#
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"لم يتم ايحاد طابعة محلية!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "رجاء اختر المنفذ الموصلة إليه طابعتك."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "إعداد يدوي"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "مجموعة العمل"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "اسم مستضيف الطابعة"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "الوصف"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "المكان"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "تم اختيار النّموذج يدويًّا"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "إختيار وحدات الطابعة"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "ما هو نوع الطابعة لديك؟"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "إعداد OKI WinPrinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "إعداد Lexmark Inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"هل تريد تعيين هذه  الطابعة (\"%s\")\n"
-"كطابعة افتراضية؟"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "إطبع"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "طابعة خام"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "إغلاق"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "جاري الطباعة/المسح على \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "جاري الطباعة على الطابعة \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "قائمة خيارات الطابعة"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "نقل إعدادات الطابعة"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "جاري بدء الشبكة..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "لم يتم تحديد وظيفية الشبكة"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "مرتفع"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "أي نظام طباعة تريد أن تستخدم؟"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "إعداد الطابعة \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "جاري إعداد التطبيقات..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "تغيير نظام الطباعة"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "هل تريد تجربة إعداد طابعة أخرى؟"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "تعديل اعدادات الطابعة"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"الطابعة %s\n"
-"هل تريد تعديل تلك الطابعة؟"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "نوع وصلة الطابعة"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "اعرف كيف تستخدم هذه الطابعة"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr ""
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "إعداد البروكسي"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "عنوان"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr ""
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr ""
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr ""
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr ""
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr ""
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr ""
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "إنترنت"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "نظام"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr ""
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "خادم قواعد بيانات"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "الخدمات"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr ""
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr ""
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr ""
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "ابدأ"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "توقف"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "الإنترنت و المراسلة"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "وسائط متعددة و رسوميات"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "مركز تحكم Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "واجهات الإستخدام"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "الالعاب"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "استشارات Mandrake"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr ""
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "أداة اعداد المثبّت الآلي"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "إعداد الخطوات الآلية"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "تثبيت آلي"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "أزل المادة الأخيرة"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "رجاء اختر كل المستخدمين الذين تريد تضمينهم في النسخ الإحتياطي."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "ازل المادة المختارة"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "المستخدمون"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "فضلا أدخل اسم المستضيف أو عنوان IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "رجاء أدخل اسم الدخول"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "رجاء كلمة المرور"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "تذكّر كلمة السّرّ هذه "
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "وصلة FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "وصلة آمنة"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "إلى المساعد  CD/DVDROM  الاستعمال "
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "رجاء اختر مساحة القرص المدمج"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "فضلا قم بالتأشير هنا اذا كنت تستخدم وسيط CDRW"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "فيما مضى  CDRW من فضلك فحص ,إذا أردت أن تمحو "
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-" من فضلك فحص إذا أردت أن تتضمّن \n"
-"ركّب الجدر على قرصك المدمج"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "الشبكة"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "كلّ ساعة "
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "يوميًّا "
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "أسبوعيّا"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "شهريا"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "استخدم المراقب"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"فضلا اختر الفترة \n"
-"ما بين كل عملية نسخ احتياطي"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"رجاء اختر\n"
-"وسيط النسخ الاحتياطي"
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "FTPاستخدم مع المراقب"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "ماذا "
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "أين"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "متى "
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "خيارات أكثر"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "إعدادات Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "رجاء اختر أين تريد النسخ الاحتياطي."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "على القرص الصّلب"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "عبر الشّبكة"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "رجاء اختر ما تريد نسخه احتياطياً"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "نظام المساعد"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "مستخدمو المساعد"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "اخترالمستخدم يدويًّا"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"مصادر المساعد :\n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"-ملفّات النّظام  :\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"-ملفّات المستخدم:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"-الملفّات الأخرى:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- احفد القرص الصّلب على الطّريق :%s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"-FTP  و على  host  احفد على : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- خيارات:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackups use tar and bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackups use tar and gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"-Daemon (%s) include :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Network by FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Network by SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "رجاء اختر تاريخ الإستعادة"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "اختر وسيط آخر للاستعادة منه"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "وسيط آخر"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "استعد النّظام"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "أعد المستخدمين "
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "استعد آخر"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "استعادة مخصصة"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "السابق"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "حفظ"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "استعادة"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "التالي"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "قائمة الحزم المطلوب تثبيتها"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "رجاء اختر تاريخ الإستعادة..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "رجاء اختر وسيط النسخ الإحتياطي..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "رجاء اختر البيانات المطلوب نسخها احتياطيا..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "رجاء أدخل سرعة سواقة كتابة الأقراص"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "قم بالنسخ الآن من ملف التهيئة"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "اعرض تهيئة النسخ الإحتياطي"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "إعدادات المعالج"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "إعداد متقدم"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "فشل تثبيت %s. ظهر الخطأ التالي:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "انتهى"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs restart"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "استيراد الخطوط"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "خيارات متقدمة"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "قائمة الخطوط"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "طابعات عادية (Generic)"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "تم اختيار الكل"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "ازل القائمة"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "الإختبارات الأولية"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "ما بعد التثبيت"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "ما بعد ازالة التثبيت"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "أعق"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "مشاركة اتصال الإنترنت غير ممكَّنة الآن."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr "ماذا  تحبّ أن تعمل"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "مشاركة إتصال الإنترنت ممكَّنة الآن."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "السّطح البينيّ  %s(استعمال مركبة%s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "السّطح البينيّ  %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "لا محوّل الشّبكة على نظامك"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "سطح بينيّ للشبكة "
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "واجهة الشبكة معدّة مسبقا!"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "اعداة تهيئة آلية"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "أظهر تهيئة الواجهة الحالية"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"الشّكل الحاليّ من `%s':\n"
-"n/الشّبكة : %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "عنوان IP لخادم DHCP (هذا)"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Firewalling configuration  تم اكتشاف "
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "لم يتم اعداد أي مشاركة اتصال بالإنترنت"
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "إعدادات مشاركة إتصال الإنترنت"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr ""
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "النّبذة :"
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "نبذة جد يد ة..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Hostname :"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr ""
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "النوع:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "الانتظار من فضلك"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "إعداد LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "المحرك"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "الواجهة"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "الحالة"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "المعالج..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "تطبيق"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "يرجى الإنتظار... جاري تطبيق الإعدادات"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "متّصل "
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "غير متصل"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "متصل"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "إعداد LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "المحوّل %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP العميل "
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "إعدادات الإتصال بالإنترنت"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "إعدادات الإتصال بالإنترنت"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "نوع العلاقة"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameters"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet Card"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP العميل"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "مركز التّحكّم "
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "كندة (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "الولايات المتّحدة الأمريكيّة (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "الولايات المتّحدة الأمريكيّة (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "الولايات المتّحدة الأمريكيّة  (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "الصين (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "اليابان (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "اليابان (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "أوروبّا الشّرقيّة"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "أيرلندا"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "أوروبّا الغربيّة"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "أوستراليا"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "نيوزيلندا "
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "جنوب أفريقيا "
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "الأرجنتين "
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"من فضلك\n"
-" في معيار تليفزيونك و البلد type"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV norm :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Area :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "الاستعمال: keyboarddrake [--expert][لوحة المفاتيح]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "من فضلك اختر تصميم لوحة مفاتيحك"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Cd-Romتغيير"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "إعرض سجلات اليوم المختار فقط"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/ملف/_جديد"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>ج"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/ملف/_فتح"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>ف"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/ملف/_حفظ"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>ح"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/ملف/حفظ با_سم"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/ملف/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/خ_يارات"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/خيارات/احتبار"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_مساعدة"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/مساعدة/_حول"
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "المستخدم"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "الرسائل"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "شروح أدوات Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "بحث"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "أداة لمراقبة سجلات نظامك"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "الضبط"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "الموائمة"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "لكن ليس موائمة"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "احتيار ملف"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "التقويم"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "محتويات الملف"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "تنبية البريد/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "يرجى الإنتظار, جاري تحليل الملف: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "تهيئة تنبيه البريد/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"أهلا بكم الى أداة تهيئة البريد/SMS.\n"
-"\n"
-"هنا سيمكنك الإعداد \n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "إعدادات الخدمات"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "حمل الإعدادات"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "سوف تستلم تنبيها اذا كان التحميل أعلى من هذه القيمة"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "إعدادات التنبيه"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "أعدّ الطريقة التي سينبهك النظام بها"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "حفظ بإسم.."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "no serial_usb found\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s found on %s وفّق بينه "
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "اختر جهاز المسح الضوئي"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "هذا %s الماسح الضّوئيّ غير مدعّم"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "جهاز الإقلاع"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "إعدادات الجدار الناري"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "أعدادات الجدار الناري"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "اختر لغتك"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "اختر نوع التثبيت"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "التحقق من الأقراص الصلبة"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "إعداد الفأرة"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "اختر لوحة المفاتيح الخاصة بك"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "الأمن"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "إعداد نظم الملفات"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "تجهيز التجزئات"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "اختر الحزم التي ستُثبَّت"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "تثبيت النظام"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "أضف مستخدم"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "تهيئة الشبكة"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "تهيئة الخدمات"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "تثبيت محمِّل الإقلاع"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "إعمل قرص إقلاع"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "تهيئة X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "تثبيت تحديثات النظام"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "الخروج من التثبيت"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"?قد نكتب التّغييرات هذه للقرص.  اعد اد كامل \n"
-" \n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "استطع"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "%sللكتابة  %sلا يمكن أن ينفتح \n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "لا, لا أحتاج الى DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "نعم أحتاج الى DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "لا, لا أحتاج الى NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "نعم أحتاج NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "لا تحفظ"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "إحفظ و اخرج"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "معالج إعداد الجدار الناري"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "لا (امنع هذا من الإنترنت عن طريق الجدار الناري)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "نعم (اسمح لهذا من خلال الجدار الناري)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "يرجى الإنتظار... جاري التأكد من الحزم المثبتة"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "ويب/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "جهاز شبكة (عميل)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "خادم NFS, خادم SMB, خادم بروكسي, خادم ssh"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "أدوات المكتب"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "محطة عمل غنوم"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "أدوات لجهاز بالم بايلوت أو فايزور ألخاص بك"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "محطة عمل"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "جدتر ناري/موجِّه"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "خادم أسماء النطاثات و معلومات الشيكة"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"برامج مكتبية: معالجة الكلمات (kword, abiword), الجداول الحسابية (kspread, "
-"gnumeric) , برامج عرض pdf, الخ"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "أدوات صوتية: مشغلات mp3 أو midi, مازجات صوت, الخ"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "كتب و مذكرات 'كيف أعمل' حول لينكس و البرامج الحرة"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "محطو عمل كيدي"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, الخ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "وسائط متعدددة - فيديو"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "مجموعة من الأدوات للبريد , الأخبار, الإنترنت, نقل الملفات, و المحادثة"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "قواعد البيانات"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "خادم قواعد البيانات PostgreSQL أو MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "أدوات لتسهيل إعداد جهازك"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "وسائط متعددة - صوت"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "أدوات خدمية"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "وثائق المساعدة"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "أدوات سطر الأوامر"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "خادم البريد Postfix, خادم الأخبار Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "محطة انترنت"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "محطة وسائط متعددة"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "أدوات الإعدادات"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "أسطح مكتب رسومية أكثر (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"بيئة سطح مكتب كيدي, البيئة الرسومية الأساسية مع مجموعة من الأدوات المصاحبة"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "بيئات رسومية"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "أدوات لعمل و نسخ الأقراص"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "محطة عمل مكتبية"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "خادم"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, الخ"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "برامج رسوميات مثل The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "برامج و مكتبات تطوير C و C++"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "خادم شبكات"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "بريد/أدوات مجموعات/أخبار"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "محطة ألعاب"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "برامج تشغيل و تحرير الفيديو"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "وسائط متعددة - رسوميات"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "برامج التسلية: ألعاب فيديو, ألعاب لوحات, ألعاب ستراتيجية, الخ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"مجموعة من الأدوات لقراءة و ارسال البريد و الأخبار (pine, mutt, tin..) و "
-"لتصفح الإنترنت"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "الأرشفة, محاكيات, أدوات مراقبة النظام"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "الميزانية الشخصية"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"بيئة رسومية مع مجموعة من التطبيقات و أدوات سطح المكتب المناسبة للمستخدمين "
-"العاديين"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "عملاء لبروتوكولات مختلفة مثل ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "بوابة انترنت"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "برامج تحرير/تشغيل الفيدية و الصوت"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "أسطخ مكتب رسومية أخرى"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "محررات نصوص, أغلفة, أدوات ملفات, طرفيات"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "برامج لإدارة ميزانيتك مثل gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "ادارة المعلومات الشخصية"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "وسائط متعددة - نسخ أقراص"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "محطة عمل علمية"
-
-#~ msgid "About"
-#~ msgstr "حول"
-
-#~ msgid "             Help           "
-#~ msgstr "             مساعدة           "
-
-#~ msgid "None"
-#~ msgstr "ولا واحدة"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "اختر الطابعة الافتراضية:"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "يمكنك الآن اعطاء الخيارات للوحدة %s"
-
-#~ msgid "mount failed"
-#~ msgstr "فشل التحميل"
-
-#~ msgid "Low"
-#~ msgstr "منخفض"
-
-#~ msgid "Medium"
-#~ msgstr "متوسط"
-
-#~ msgid "Export"
-#~ msgstr "تصدير"
-
-#~ msgid "click here"
-#~ msgstr "انقر هنا"
-
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "تم التخقق من وجود %s, هل تريد اعداده؟"
-
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "رجاء اختر الطابعة التي تريد تهيئتها."
-
-#~ msgid "authentification"
-#~ msgstr "المصادقة"
-
-#~ msgid "user"
-#~ msgstr "المستخدم"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "جاري مسح مصادر nfs المشتركة المتوفرة"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "جاري مسح مصادر nfs المشتركة المتوفرة للخادم %s"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "جاري مسح مصادر samba المشتركة المتوفرة"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "جاري مسح مصادر samba المشتركة المتوفرة للخادم %s"
-
-#~ msgid "\\@quit"
-#~ msgstr "\\@خروج"
-
-#~ msgid "Removable media"
-#~ msgstr "وسائط قابلة للإزالة"
-
-#~ msgid "Active"
-#~ msgstr "نشط"
-
-#~ msgid "No X"
-#~ msgstr "لا X"
-
-#~ msgid " Linux "
-#~ msgstr " لينكس "
-
-#~ msgid " System "
-#~ msgstr " نظام "
-
-#~ msgid " Other "
-#~ msgstr " أخرى "
-
-#~ msgid "please choose your CD space"
-#~ msgstr "رجاء اختر مساحة القرص المدمج"
-
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "فضلا قم بالتأشير هنا اذا كنت تستخدم وسيط CDRW"
-
-#~ msgid " Tape "
-#~ msgstr " الشريط "
-
-#~ msgid " Cancel "
-#~ msgstr " إلغاء "
-
-#~ msgid " Ok "
-#~ msgstr " موافق "
-
-#~ msgid "close"
-#~ msgstr "إغلاق"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "لم يمكن فتح /etc/sysconfig/autologin للقراءة: %s"
-
-#~ msgid "New"
-#~ msgstr "جديد"
-
-#~ msgid "Remote"
-#~ msgstr "بعيد"
-
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr ""
-#~ "فضلا اضغط الزر بالأعلى\n"
-#~ "\n"
-#~ "أو استخدم \"جديد\""
-
-#~ msgid "Use \"New\""
-#~ msgstr "استخدم \"جديد\""
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr "اذا لم تتضمن القائمة المدخل المطلوب, قم بإدخاله هنا:"
-
-#~ msgid "Shared resource"
-#~ msgstr "مصدر مشترك"
diff --git a/perl-install/share/po/az.po b/perl-install/share/po/az.po
deleted file mode 100644
index fb71a4b28..000000000
--- a/perl-install/share/po/az.po
+++ /dev/null
@@ -1,12924 +0,0 @@
-# Azerbaijani Turkish translation of DrakX
-# Copyright (C) 1999 MandrakeSof
-# Vasif Ismailoglu MD <azerb_linux@hotmail.com>, 2000
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-06-09 23:30GMT +0200\n"
-"Last-Translator: Vasif İsmayıloğlu MD <azerb_linux@hotmail.com>\n"
-"Language-Team: Azerbaijani Turkish <linuxaz@azerimal.net>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Bütün başlıqları ayrı ayrı quraşdır"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Xinerama ifadələrini işlət"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Təkcə \"%s\" kartını qur (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Çoxlu Başlıq quraşdırılması"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Sizin sisteminiz çoxlu başlıq quraşdırmasını dəstəkləyir.\n"
-"Nə etmək istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Ekran kartı"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Ekran kartınızı seçin"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Bir X vericisi seçin"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X verici"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Bir X vericisi seçin"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X verici"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Necə bir XFree qurğusunu istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Sizin kartınızın 3D sür'ətləndirmə dəstəyi ola bilər, amma sadecə olaraq "
-"XFree %s\n"
-"ilə düzgün işləyər.\n"
-"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D üçün daha yaxşı "
-"bir fikir olar."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Sizin kartınızın XFree %s ilə 3D dəstəyi ola bilər."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "3D avadanlıq sür'ətləndirməsi ilə XFree %s"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Sizin kartınızın XFree %s ilə 3D dəstəyi ola bilər.\n"
-"DİQQƏT! BU SINAQ MƏRHƏLƏSINDƏDIR VƏ KOMPÜTERİNİZ DONDURA BILƏR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "SINAQ MƏRHƏLƏSİNDƏKİ 3D sür'ətləndirmə dəstəkli XFree %s"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Sizin kartınızın 3D sür'ətləndirmə dəstəyi ola bilər, amma sadecə olaraq "
-"XFree %s\n"
-"ilə düzgün işləyər.\n"
-"DİQQƏT! BU SINAQ MƏRHƏLƏSINDƏDIR VƏ KOMPÜTERİNİZ DONDURA BILƏR.\n"
-"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D üçün daha yaxşı "
-"bir seçki olar."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree quraşdırılması"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Ekran kartınızın yaddaş böyüklüyünü seçin"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "X verici üçün seçənəkləri göstərin"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Monitorunuzu seçin"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Buradaki iki vacib parametr üfüqi ve şaquli yeniləmə sür'ətləridir.\n"
-"Seçərkən monitorunuzun qabiliyyətinin üstündə bir parametr\n"
-"seçməməyiniz çox vacibdir, əks halda monitor zərər görər.\n"
-"Seçərkən bir qərarsızlığa düşərsəniz, alçaq rezolyusiya seçin."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Üfüqi yeniləmə sür'əti"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Şaquli yeniləmə sür'əti"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor qurulmayıb"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Ekran kartı hələ qurulmayıb"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Rezolyusiya hələ seçilməyib"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Diqqət: Bu qrafika kartı ilə ediləcək sınaq təhlükəlidir"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Qurğuların sınağı"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"bə'zi parametrləri dəyişdirin"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Bir xəta oldu:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d saniyə sonra çıxılacaq"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Bu qurğular doğrudur?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Bir xəta oldu, parametrləri dəyişdirin"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rezolyusiya"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Rezolyusiya və rəng dərinliyini seçin"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Ekran kartı: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 verici: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Daha Çox"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Oldu"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Usta Modu"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Hamısını Göstər"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rezolyusiyalar"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavatura düzülüşü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Siçan növü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Siçan avadanlığı: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitorun Şaquli Daraması: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitorun Üfüqi Yeniləməsi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Ekran kartı: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Ekran kartı: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Ekran kartı yaddaşı: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Rəng dərinliyi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolyusiya: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 verici: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 sürücü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X-Window qurğuları hazırlanır"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Nə etmək istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Monitoru Dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Ekran kartını dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Verici seçənəklərini dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Rezolyusiyanı Dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mə'lumatı göstər"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Yenidən sına"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Çıx"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Mövcud qurğuları saxlayım?\n"
-"Hal-hazırkı qurğular:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ilə Açılış"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Kompüterinizi avtomatik olaraq X ilə açılması üçün qura bilərəm.\n"
-"Açılışda X Window ilə başlamaq istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "\"%s\"a(ə) təkrar girin və dəyişiklikləri fəallaşdırın"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Lütfen çıxın və Ctrl-Alt-BackSpace düymələrinə basın"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 rəng (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 min rəng (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 min rəng (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milyon rəng (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milyard rəng (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB və ya daha çox"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standart VGA, 60 Hz-də 640x480 "
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 56 Hz-də 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Uyğun, 87 Hz-də titrəşimli 1024x768 (800x600 yox)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 87 Hz-də titrəşimli 1024x768, 56 Hz-də 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Təkmilləşdirilmiş Super VGA, 60 Hz-də 800x600, 72 Hz-də 640x480"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Titrəşimsiz SVGA, 60 Hz-də 1024x768, 72 Hz-də 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Yüksək Frekanslı SVGA, 70 Hz-də 1024x768"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Çoxlu Frekansa qadir 60 Hz-də 1280x1024"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Çoxlu Frekansa qadir 74 Hz-də 1280x1024"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Çoxlu Frekansa qadir 76 Hz-də 1280x1024"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "70 Hz də 1600x1200 qadir Monitor"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "76 Hz də 1600x1200 qadir Monitor"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Açılış qisminin ilk sektoru"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Diskin ilk sektoru (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO Qurulumu"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Sistem yükləyicisini haraya qurmaq istəyirsiniz?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grup Qurulumu"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "Mətn menyulu LILO"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "Qrafiki menyulu LILO"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "DOS/Wİndowsdan açıl (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Sistem yükləyicisi ana seçənəkləri"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "İstifadə ediləcək Açılış idarəcisi"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Açılış yükləyici quruluşu"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Açılış avadanlığı"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (köhnə BIOSlarda işləməz)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Bəsit"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "bəsit"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Ekran modu"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Açılışda gecikmə müddəti"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Parol"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Parol (təkrar)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Əmr sətiri seçənəklərini məhdudlaşdır"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "məhdudlaşdır"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "/tmp-i hər açılışda təmizlə"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ümumi yaddaş miqdarı (%d MB tapıldı)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Birdən artıq profilə icazə ver"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Yaddaş miqdarını Mb cinsindən verin"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"``Əmr sətiri seçənəklərini məhdudlaşdır`` seçənəyi parolsuz bir işə yaramaz"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Xahiş edirik təkrar sınayın"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Parollar uyğun gəlmir"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "İnit İsmarıcı"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Firmware Gecikməsini Aç"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Çəkirdək Açılışı Vaxt Dolması"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "CDdən Açılışı Fəallaşdırım?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "OF Açılışı Fəallaşdırım?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Əsas OS"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Buradakı bir birindən fərqli seçənəklərə yenilərini əlavə edə bilər,\n"
-"ya da mövcud olanları dəyişdirə bilərsiniz."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Əlavə et"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Qurtardı"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Təkmilləşdir"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Ne cür bir giriş istəyirsiniz?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linuks"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Digər sistemlər (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Digər sistemlər (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Digər sistemlər (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Əks"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Kök"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Sonuna əlavə et"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Oxu-yaz"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Cədvəl"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "E'tibarsız"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiket"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Əsas"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd böyüklüyü"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVİdeo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Girişi sil"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Boş etiket qəbul edilə bilməz"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Bir swap sahəsinə ehtiyacınız var"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Bu etiket istifadə edilməz"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s ara üzü tapıldı"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Başqa var?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Heç %s ara üzü var?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Xeyr"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Bəli"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Avadanlıq mə'lumatına bax"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s kartı (%s) üçün sürücü yüklənir"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hansı %s sürücüsü sınansın?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Bəzi hallarda, %s sürücü düzgün işləməsi üçün əlavə mə'lumat istəyə bilər.\n"
-"Sürücüler üçün əlavə bir xüsusiyyət göstərmək mi istəyərsiniz, yoxsa\n"
-"sürücülərin lazımi mə'lumatlar üçün avadalığı tanımasını mı istəyərsiniz? \n"
-"Bə'zən tanımlama kompüterinizi dondura bilər amma donduğu üçün\n"
-"kompüterinizə heç bir şey olmaz."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Avtomatik yoxla"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Seçənəkləri göstər"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"İstəsəniz indi %s modulunun parametrlərini göstərə bilərsiniz.\n"
-"Parametrlər``ad=qiymət ad2=qiymət2...'' şəklində olmalıdır.\n"
-"Məsələn ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modul seçənəkləri:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"%s modulunun yüklənməsi iflas etdi.\n"
-"Yenidən başqa bir parametr ilə sınamaq istəyirsiniz?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s artıq əlavə edilmişdir)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Zəif parol seçdiniz!"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Xahiş edirik bir istifadəçi adı alın"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"İstifadəçi adında sadacə kiçik hərflər, rəqəmlər, `-' və `_' xarakterləri "
-"ola bilər"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Bu istifadəçi adı artıq vardır"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "İstifadəçini əlavə et"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Bir istifadəçi girin\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "İstifadəçini qəbul et"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Həqiqi adı"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "İstifadəçi adı"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Qabıq"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Timsal"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Avtomatik Giriş"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Kompüterinizi avtomatik olaraq bir istifadəçi ilə başlada bilərəm.\n"
-"İstəmirsiniz isə rədd edin."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Əsas istifadəçini seçin:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "İstifadə etmək istədiyiniz pəncərə idarəçisini seçin:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Hamısı"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "İstifadəçi əlavə et"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Xüsusi"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS başlayır"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Bu paket yenilənməlidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Ləğv et"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Krakerlərə xoşgəlmişsiniz"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Zəif"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standart"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Yüksək"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Yüksək"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Şübhəci"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Bu səviyyə RAID'i diqqətli istifadənizi tövsiyə edirik. Sisteminiz daha "
-"asand\n"
-"işlədiləcək, ancaq xətalara qarşı da həssaiyyəti də artacaqdır. İnternetə \n"
-"bağlı isəniz bunu tövsiyə etmirik. Parol ilə girilir."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Parollar fəallaşdırıldı, yenə də bir şəbəkə üstündə istifadə edilməməsi "
-"tövsiyə edilir."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"İnternetə bağlı bir kompüter üçün standart və tövsiyə edilən bir "
-"təhlükəsizlik səviyyəsidir."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Bu təhlükəsizlik səviyyəsiylə sistemin bir verici olaraq istifadəsi "
-"mümkündür.  \n"
-"Təhlükəsizlik, birdən çox alıcının bağlanmasına icazə verəcək şəkildə "
-"artırılmışdır. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Biz dördüncü səviyyə haqlarını verdik və sistem xarici bağlantılara qarşı "
-"tamamilə qapalıdır.\n"
-"Təhlükəsizlik səviyyəsi indi ən üstdədir."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Təhlükəsizlik səviyyəsini seçin"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Təhlükəsizlik səviyyəsinin quraşdırılması"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "X verici üçün seçənəkləri göstərin"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"%s emeliyyat sistemi secki proqramina xos gəlmissiniz!\n"
-"\n"
-"Içlerinden birini acmaq ucun adini yazin ve <ENTER>\n"
-"duymesine basin ve ya esas acilis ucun %d saniye gozleyin.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Emeliyyat sistemi secici GRUB'a xos gəlmissiniz!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "%c ve %c duymeleri ile isıqlandırılmıs girisleri sece bilersiniz"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Sistemi secili emeliyyat sistemiyle acmaq ucun entere,"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-"acilisdan evvel emrleri duzeltmək ucun 'e', emr setiri ucun ise 'c' basin"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Isaretli secenek %d saniye icinde sistemi acacaq."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "/boot içində lazımi yer yoxdur"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Masa Üstü"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Başlama Menyusu"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Sistem yükləyicisini haraya qurmaq istəyirsiniz?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "hələlik yardım sistemi mövcud deyildir.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Qurulum Tərzi Quraşdırılması"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fayl"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fayl/Çı_x"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>x"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Kateqoriyasından Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Ənənəvi Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Ənənəvi Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Açılışda Auroranı başlat"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modu"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modu"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Açılış İdarəçisi olaraq hazırda %s işlədirsiniz.\n"
-"Quraşdırma sehirbazını başlatmaq üçün tıqlayın."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Qur"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistem modu"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Açılışda X-Window sistemini başlat"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Xeyr, Avtomatik giriş istəmirəm"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"Bəli, bu istifadəçi üçün avtomatik giriş istəyirəm (istifadəçi, masa üstü)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Oldu"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "/etc/inittab oxunmaq üçün açıla bilmir: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm_.c:114
-#, fuzzy, c-format
-msgid "%d seconds"
-msgstr "%d saniyə sonra çıxılacaq"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Fransızca"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belçika dili"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Almanca"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Yunanca"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norveçcə"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "İsveçcə"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "İtalyanca"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "serial"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Əvvəlcə datanızın yedəyini alın"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Diqqətlə Oxuyun!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Aboot istifadə etməyi istəyirsinizsə, boş disk sahəsi (2048 sektor bəsdir.)\n"
-"buraxmayı unutmayın."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Xəta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Sehirbaz"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Monitorunuzu seçin"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tək bir böyük disk bölməniz var\n"
-"(əsasən MS DOS/Windows istifadə edər).\n"
-"Əvvəlcə bu disk bölməsinin böyüklüyünü dəyişdirməyinizi\n"
-"tövsiyə edirik. Əvvəlcə bölmənin üstünə, sonra \"Böyüklüyü\n"
-"Dəyişdir\" düyməsinə tıqlayın"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Ətraflı"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "bağlama iflas etdi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Boş"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Digər"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Fayl sistemi növü:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Yarat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Növ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Yerinə ``%s'' işlət"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Sil"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Əvvəlcə ``Ayır'-ı işlət"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsinin növünü dəyişdirdikdən sonra, bu bölmədəki bütün mə'lumatlar "
-"silinəcəkdir"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Monitorunuzu seçin"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Yeni bölmə yarat"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Usta moduna keç"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Normal moda keç"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Geri al"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Davam edilsin?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Qeyd etmədən Çıx"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Bölmə cədvəlini qeyd etmədən çıxırsınız?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Avtomatik ayır"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Hamısını təmizlə"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Sabit disk seçkisi"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Bütün birinci bölmələr istifadədədir"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "Artıq bölmə yaratmaq üçün, bir bölməni silib məntiqi bölmə yaradın"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Bölmə cədvəlini yaz"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Bölmə cədvəlini qurtar"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Bölmə cədvəlini qurtar"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Bölmə cədvəlini qurtar"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Taxılıb sökülə bilən avadanlıqların avtomatik bağlanması"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Fayl seç"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Yedək bölmə cədvəli eyni böyüklüyə sahib deyil\n"
-"Davam etmək istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Xəbərdarlıq"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Disket sürücüyə bir disket yerləşdirin\n"
-"Bu disketdəki bütün mə'lumatlar yox olacaqdır"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Bölmə cədvəli qurtarılmağa cəhd edilir"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Mə'lumatı göstər"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Bağlama nöqtəsi"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Seçənəklər"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Böyüklüyünü Dəyişdir"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Daşı"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Şəkilləndir"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Bağla"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "RAIDə əlavə et"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "LVMə əlavə et"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Ayır"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "RAIDdən ayır"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "LVMdən ayır"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAIDi dəyişdir"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Loopback üçün istifadə et"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Yeni bölmə yarat"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Başlanğıç sektoru: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "MB cinsindən böyüklük: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Fayl sistemi növü: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Bağlama nöqtəsi: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Xüsusiyyətlər: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Loopback faylı şəkilləndirilir: %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Bölmə növünü Dəyişdir"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Hansı dili istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "%s loopback avadanlığını haraya bağlamaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "%s avadanlığını haraya bağlamaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Bu disk bölməsi loopback üçün istifadə edildiyindən ötrü bağlanma "
-"nöqtəsindən ayrıla bilinmir.\n"
-"Əvvəlcə loopback-ı ləğv edin."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Fat fayl sistemi ucları hesaplanır"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Böyüklüyü dəyişdirilir"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Hansı bölmə növünü istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Bu bölmədəki bütün mə'lumatlar yedəklənməlidir"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsi böyüklüyü dəyişdirildirkdən sonra bu bölmədəki bütün mə'lumatlar "
-"silinəcəkdir"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Yeni böyüklük seçin"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "MB cinsindən böyüklük: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Hansı diskə daşımaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Hansı sektora daşımaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Daşınır"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Bölmə daşınır..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Əlavə etmək üçün mövcud bir RAID seçin"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "yeni"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Əlavə etmək üçün mövcud bir LVM seçin"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM adı?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Bu disk bölməsi loopback üçün işlədilməz"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback fayl adı: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Həqiqi adı"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Fayl başqa bir loopback tərəfindən istifadədədir, başqa\n"
-"birini seçin"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Fayl onsuz da vardır. İşlədilsin?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Modul seçənəkləri:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "avadanlıq"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "səviyyə"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "parça böyüklüyü"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Diqqətlı olun: bu əməliyyat təhlükəlidir."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Nəcə bölməlandirmə istəyirsən?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Bağışlayın, /boot bölməsini bu sürücüdə yarada bilməyəcəm.\n"
-"Onda ya LILO istifadə edə bilməyəcəksiniz ve /boot bölümünə \n"
-"ehtiyacınız yoxdur və ya LILO istifadəsini sınayarsınız, ancaq LILO işləməyə "
-"bilər."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Seçdiyiniz bölüm fiziki sahənin üstündə (1024. silindrin xaricində)\n"
-"/boot bölümünüz yoxdur. Lilo açılış idarəcisindən istifadə etmək "
-"istəyirsinizsə, \n"
-"/boot bölməsini əlavə edərkən çox diqqətli olmalısınız."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Bir proqram tə'minatlı RAID bölməsini kök qovluğu (/) olaraq tə'yin "
-"etdiniz.\n"
-"Əgər lilo ya da grub istifadə etmək istəyirsinizsə, bir /boot bölməsi\n"
-"əlavə etməyi unutmayın"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s sürücüsünün bölmə cədvəli diskə yazılacaq!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Yeni qurğuların fəallaşmağı üçün sistemi yenidən başlatmalısınız"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsi şəkilləndirildikdən sonra bu bölmədəki bütün mə'lumatlar "
-"silinəcəkdir"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Şəkilləndirilir"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Loopback faylı şəkilləndirilir: %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Şəkilləndirilən bölmə: %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid iflas etdi"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Yeni bölmələr üçün boş sahə yoxdur"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Yeni bölmələr üçün boş sahə yoxdur"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Rezolyusiya: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Avadanlıq: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS sürücü hərfi: %s (sadəcə təxmini)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Növ: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ad: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Başlanğıc: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Böyüklüyü: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektor"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindr %d -dən silindr %d-yə\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Şəkilləndirilmiş\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Şəkilləndirilməmiş\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Bağlı\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback faylı:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Ana açılma bölməsi\n"
-"    (MS-DOS açılışı üçün)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Səviyyə %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Parça böyüklüyü %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskləri %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback faylı adı: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Bəlkə də bu bir Sürücü bölməsidir.\n"
-"Onda bunu ele beləcə buraxın.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Bu, ikili açılış üçün xüsusi\n"
-"Bootstrap-dır.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Böyüklük: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometriyası: %s silindr, %s baş, %s sektor\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Mə'lumat: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskləri %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Bölmə cədvəli növü: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "%d data yolunda, %d nö'li\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Seçənəklər: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Fayl sistemi növü: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Bu parol çox sadədir (en az %d xarakter boyunda olmalıdır)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Parollar uyğun gəlmir"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Bölmə növünü Dəyişdir"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS verici"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s şəkilləndirilməsində %s bölmə xətası"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "%s'i necə şəkilləndirəcəyimi bilmirəm (Növ: %s)"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s ayrılırkən xəta oldu: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "bəsit"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "verici"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "16MB dən kiçik disk bölmələrində JFS istifadə etməlisiniz"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB dən kiçik disk bölmələrində ReiserFS istifadə etməlisiniz"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Bağlama nöqtələri / ilə başlamalıdır"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Onsuz da bağlama nöqtəsi %s olan bir bölmə var\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "%s üçün LVM Məntiqi Cildini istifadə edə bilməzsiniz"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Bu qovluq kök fayl sistemi içərisində olmalıdır"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Bu bağlama nöqtəsi üçün həqiqi bir fayl sisteminə (ext2, reisrfs)\n"
-"ehtiyac vardır.\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "%s üçün LVM Məntiqi Cildini istifadə edə bilməzsiniz"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Avtomatik yerləşdirmə üçün boş sahə yoxdur"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Yazmaq üçün açılan %s'də xəta: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Bir xəta oldu. Yeni fayl sisteminin yaradılacağı hökmlü bir sürücü "
-"tapılmadı. Bu problemin qaynağı üçün avadanlığınızı yoxlayın"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Heç disk bölməniz yoxdur!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Yuxarıda sürücünüzdə tapılan Linuks bölmələri sıralanıb\n"
-"Sehirbazın tövsiyələrinə uyun, onlar çox vaxt işə yarayır.\n"
-"Əgər bunu istəməsəniz en azından kök bölməsi (\"/\") seçməlisiniz\n"
-"Çox kiçik bölmə seçməyin. yoxsa çox proqram tə'minatı yükləyə bilməzsəniz.\n"
-"Əgər verilərinizi başqa bölmədə tutmaq istəyirsinizsə, ondabir de \"/home\" "
-"bölməsi də yaratmalısınız (birdən çox Linuks\n"
-"bölməniz var isə).\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, hər bölmə aşağıdakı kimi sıralanıb: \"Ad\", \"Həcm\".\n"
-"\n"
-"\n"
-"\"Ad\" belə kodlanıb: \"sürücü növü\", \"sürücü mömrəsi\",\n"
-"\"bölmə nömrəsi\" (məsələn \"hda1\").\n"
-"\n"
-"\n"
-"\"Sürücü növü\" əgər sürücünüz IDE sürücüdürsə \"hd\"dirvə SCSI sürücü isə "
-"\"sd\"dir.\n"
-"\n"
-"\n"
-"\"Sürücü nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
-"sürücülər üçün:\n"
-"\n"
-"*\"a\" yəni \"birinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"b\" yəni \"birinci IDE idarəcisində kölə sürücü\",\n"
-"\n"
-"*\"c\" yəni \"ikinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"d\" yəni \"ikinci IDE idarəcisində kölə sürücü\".\n"
-"\n"
-"\n"
-"SCSI sürücülərində \"a\" nın mənası \"birinci sürücü\",\n"
-"\"b\"nin mənası \"ikinci sürücü\"dür vs..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"İndi, açılışda avtomatik olaraq başlamasını istədiyiniz xidmətləri \n"
-"seçə bilərsiniz. Siçan bir maddənin üzərina gəldiyində o xidmətin rolunu "
-"açıqlayan\n"
-"kiçik bir baloncuq ortaya çıxacaqdır.\n"
-"\n"
-"Əgər kompüterinizi bir verici olaraq istifadə edəcəksəniz bu addımda tam bir "
-"diqqət ayırmalısınız:\n"
-"mühtəməldir ki lazımi heç bir xidməti başlatmaq istəməzsiniz."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Bu nöqtədə Linuks Mandrakeni sabit diskinizdə haraya quracağınıza\n"
-"qərar verəcəksiniz. Əgər diskiniz boş isə və ya bir başqa sistem\n"
-"bütün yeri doldurmuş isə, o zaman diskinizdə Linuks Mandrake üçün\n"
-"yer açmalısınız. Ona görə də diski bölmələndirməlisiniz.\n"
-"Bölmələndirmə əsasən diskinizdə məntiqi sürücülər yaratmaqdan ibarətdir.\n"
-"\n"
-"Ümumiyyətlə bölmələndirmənin təsiri geri dönülməzdir.Ona görə də\n"
-"bu iş çox gərgin və yorucudur. Əgər özünüzə inanmırsınız isə bu\n"
-"sehirbaz sizə yardım edər. Başlamadan əvvəl xahiş edirik əl kitabçanıza\n"
-"baxın. Və bu iş üçün bir az vaxt ayırın.\n"
-"\n"
-"\n"
-"Sizə ən az 2 bölmə lazımdır. Biri sistemin özünü köçürməsi üçün\n"
-"Digəri isə uydurma yaddaş (ya da digər adı ilə Swap) üçün.\n"
-"\n"
-"\n"
-"Əgər diskiniz onsuz da bölünmüş isə (əvvəlki sistemden ya da\n"
-"başqa bölmələndirmə vasitələri ilə hazırlanmış) quruluşda\n"
-"sadəcə olaraq o yerləri yükləmək üçün seçin.\n"
-"\n"
-"\n"
-"Əgər disk bölünməmiş ise, yuxarıdakı sehirbazdan istifadə edə bilərsiniz.\n"
-"Sisteminizin quruluşundan asılı olaraq müxtəlif imkanlarınız var:\n"
-"\n"
-"* Bütün diski sil: Linuks Mandrake qurmaq üçün bütün diskinizin\n"
-" üzərindəki bölmələri silər. Burada diqqətli olun.\n"
-" Sildikləriniz əsla geri gəlməz.\n"
-"\n"
-"\n"
-"* Windows bölməsindəki sahəni istifadə et: Sisteminizdə\n"
-" Microsoft Windows qurulu isə ve bütün diski əhatə edir isə\n"
-" Linuks Mandrake üçün bir yer ayırmalısınız. Bunun üçün\n"
-" ya bütün diski silməlisiniz (\"Bütün diski sil\" bax ya da\n"
-" \" Usta modu\" tövsiyələri) ya da yenidən bölmələndirməlisiniz.Bu iş heç "
-"bir mə'lumat itkisi olmadan da edilə bilər.Bunun başqa adı\n"
-" eyni kompüterdə həm Linuks Mandrake həm də Windows qurulu olmasıdır.\n"
-"\n"
-"\n"
-"t Bu seçkiyə getmədən əvvəl bir şeyi başa düşməlisiniz ki, yenidən "
-"bölmələndirmə ilə sizin Windows bölməsi kiçiləcəkdir.\n"
-" Yə'ni Windows altında daha az disk sahəsinə malik olacaqsınız.\n"
-"\n"
-"\n"
-"* Usta modu: Əgər əllə diski bölmək istəsəniz, bu modu seçin. Diqqətli "
-"olun.\n"
-" Bu mod güçlüdür amma bir o qədər də təhlükəlidir. Diskinizdəki bütün "
-"bilgiyi asandlıqla itirə bilərsiniz.\n"
-" Təcrübəsiz isəniz bunu seçməyin."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Yeni yaradılan bütün bölmələr şəkilləndirilməlidir\n"
-"(şəkilləndirmək yəni fayl sistemi yaratmaq - format).\n"
-"\n"
-"\n"
-"Bu arada var olan hazır bölmələri də üstündəkiləri silmək üçünyenidən "
-"şəkilləndirmək istəya\n"
-"bilərsiniz.\n"
-"Bunu istəyirsinizsə bu bölmələri də seçməlisiniz.\n"
-"\n"
-"\n"
-"Bunu ağlınızda tutun ki var olan bütün bölmələri şəkilləndirmək\n"
-"məcburi deyil.\n"
-"İşlətim sistəmini əmələ gətirən bölmələri (yəni\n"
-"\"/\", \"usr\" və ya \"var\"ı yenidən şəkilləndirmək üçün\n"
-"seçə bilərsiniz. Verilər olan \"home\"u məsələ toxunulmadan\n"
-"buraxa bilərsiniz.\n"
-"\n"
-"\n"
-"Diqqətli olun. şəkilləndirdiyiniz bölmələrdəki verilər\n"
-"geri gəlməz.\n"
-"\n"
-"\n"
-"Şəkilləndirməyə hazır isəniz \"Oldu\" düyməsini tıqlayın.\n"
-"\n"
-"\n"
-"Yeni Linuks Mandrake sisteminizi qurmaq üçün başqa bölmə seçmək\n"
-"istəyirsiniz isə \"Ləğv et\" düyməsinə basın."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Təptəzə Linuks Mandrake sisteminizə qurulacaq. Bu da seçdiyiniz\n"
-"yükləmə böyüklüyünə və sistəminizin qabiliyyətinə görə\n"
-"bir neçə deqiqə alar.\n"
-"\n"
-"\n"
-"Xahiş edirik, səbrli olun."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Bu nöqtədə siz Linuks Mandrake yükləmək üçün bölmələri seçməlisiniz. Əgər "
-"əvvəldən bölmələr var isə (sistemdə əvvəllər qurulu olan GNU/Linuks "
-"bölmələri və ya başqa bölmələndirmə vasitələri ilə hazırladığınız bölmələr), "
-"onları seçin və istifadə edin.\n"
-"Yoxsa onları bildirməlisiniz.\n"
-"\n"
-"\n"
-"Bölmələri yaratmaq üçün əvvəlci diski seçməlisiniz.\n"
-"Diski seçmək üçün birinci IDE sürücüsü üçün \"hda\" nı, ikinciyi seçmək üçün "
-"\"hdb\"ni, birinci SCSİ sürücüsü üçün ise \"sda\" vs tıqlamalısınız.\n"
-"\n"
-"\n"
-"Seçdiyiniz sürücüyə aşağıdakıları etməyə qadirsiniz:\n"
-"\n"
-"  *Hamısını təmizlə: seçili sürücüdə bütün bölmələri silər.\n"
-"\n"
-"\n"
-"  *Avtomatik: Sürücünüzdəki boş sahədə Ext2 və Swapbölmələrini avtomatik\n"
-"yaradar.\n"
-"\n"
-"\n"
-"  *Bölmə cədvəlini qurtar: Zədələnmiş bölmə cədvəlinibərpa edər.  Xahiş "
-"edirik\n"
-" diqqətli olun, çünkü bu da iflas edə bilər.\n"
-"\n"
-"\n"
-"  *Gəri dön: İstəmədiyiniz seçkilərinizdən geri döndərər.\n"
-"\n"
-"\n"
-"  *Yenidən yüklə: Bütün dəyişikliklərinizdən geri dönərbaşdakı bölmə "
-"cədvəlinə gələr.\n"
-"\n"
-"\n"
-"  *Sehirbaz: Bölmələndirməyi bir sehirbaz edər. Təcrübəsizisəniz bunu "
-"seçin.\n"
-"\n"
-"\n"
-" *Floppy-dən bərpa et: Bölmə cədvəlini əvvəllər flopy-yə qeydetdiniz isə, "
-"bölmə cədvəlini bərpa edin.\n"
-"\n"
-"\n"
-"  *Floppy-yə qeyd et: Daha sonradan bərpa etmek üçünbilgiləri floppy-yə qeyd "
-"edin.\n"
-"  Bu seçki şiddətlə tövsiyə edilir.\n"
-"\n"
-"\n"
-"  *Oldu: Bölmələndirmə bitdiyində, bunu seçərəkdəyişikliklərinizi qeyd "
-"edin.\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, istənilən seçkiyə Tab ve Aşağı/Yuxarı oxlarını da işlədərək "
-"klaviaturadan idarə edə bilərsiniz.\n"
-"\n"
-"\n"
-"Bölmə seçildiyi zaman bunları işlədə bilərsiniz:\n"
-"\n"
-"      *Ctrl-c yeni bölmə yaratmaq üçün (boş bölmə seçili olduğu zaman)\n"
-"\n"
-"      *Ctrl-d bölməni ləğv etmək üçün\n"
-"\n"
-"      *Ctrl-m bağlama nöqtəsini göstərmək üçün\n"
-"\n"
-"\n"
-"\n"
-"Əgər PPC kompüterdə qurulum aparırsınızsa, ən az 1 MBlıq balaca bir HFC "
-"'bootstrap' bölməsini yaboot açılış yükləyicisi üçün seçmək istəyəcəksiniz.\n"
-"Əgər daha çox yeriniz varsa ; məsələn 50 MB, onda bütün kernel və ramdisk "
-"əksini təcili açılış halları üçün saxlaya bilərsiniz."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Sürücünüzdə bir və ya daha çox Windows bölməsi tapıldı.\n"
-"Xahiş edirik Linuks Mandrakeni qurmaq üçün onlardan birini "
-"yenidənölçüləndirmək üzərə seçin.\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, her bölmə bu cür sıralanıb; \"Linuks adı\",\"Windows\n"
-"adı\"\"Həcm\".\n"
-"\n"
-"\"Linuks adı\" bu cür kodlanıb: \"sürücü növü\", \"sürücü nömrəsi\",\"bölmə "
-"nömrəsi\" (məsələn, \"hda\").\n"
-"\n"
-"\n"
-"\"Sürücü növü\" sürücünüz IDE sürücü isə \"hd\"dirSCSI sürücü isə\n"
-"\"sd\"dir.\n"
-"\n"
-"\n"
-"\"Sürücü nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
-"sürücülər üçün:\n"
-"\n"
-"*\"a\" yəni \"birinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"b\" yəni \"birinci IDE idarəcisində kölə sürücü\",\n"
-"\n"
-"*\"c\" yəni \"ikinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"d\" yəni \"ikinci IDE idarəcisində kölə sürücü\".\n"
-"\n"
-"\n"
-"SCSI sürücülərində \"a\" nın mənası \"birinci sürücü\",\n"
-"\"b\"nin mənası \"ikinci sürücü\"dür vs..."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Səbrli olun. Bu əməliyyat bir neçə deqiqə sürə bilər."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Xahiş edirik Linuks Mandrakenin daha əvvəlki buraxılışları qurulu deyilsə və "
-"ya müxtəlif əməliyyat sistemlərindən istifadə etmək istəyirsinizsə \"Yüklə\" "
-"seçin.\n"
-"\n"
-"\n"
-"Xahiş edirik qurulu olan Linuks Mandrakenin əvvəlki buraxılışını güncəlləmək "
-"istəyirsinizsə \"Güncəllə\" seçin.\n"
-"\n"
-"\n"
-"Sizin GNU/Linuks biliyinizdən asılı olaraq yükləmək və ya güncəlləmək üçün "
-"Linuks Mandrakenin aşağıdakı səviyyələrini seçə bilərsiniz:\n"
-"\n"
-"* Tövsiyə edilən: Əgər əvvəlcə heç GNU/Linuks ilə tanış olmadınız isə seçin. "
-"Yükləmə çox asand olacaq və çox az sual soruşulacaq.\n"
-"\n"
-"\n"
-"* Xüsusi: Əgə əvvəlcə GNU/Linuksa bir az aşina isəniz, seçin. Onda siz "
-"istədiyiniz sistem növünü (Masa üstü, Verici, Təcrübi) seçə biləcəksiniz.\n"
-" Əlbətdə sizə \"Tövsiyə edilən\" seçkidən daha çox sual soruşulacaq.\n"
-" Ona görə də GNU/Linuksa bir az aşina olmalısınız.\n"
-"\n"
-"\n"
-"* Usta: Əgər yaxşı bir GNU/Linuks biliyinə sahibsəniz, bu sinifi seçin.\n"
-" \"Xüsusi\" sinifindəki kimi işlədəcəyiniz sistemi (Masa üstü, Verici, "
-"Təcrübi)\n"
-" seçə biləcəksiniz. Amma sizi çox çətin suallar gözləyir. Bəzən bu sualların "
-"içindən\n"
-" çıxa bilmək çox zəhmətli olur. Ona görə də nə etdiyinizi bilirsəniz, bu "
-"sinifi seçin."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Xahiş edirik doğru qapını seçin. Məsələn, MS Windowsdakı COM1'in qarşılığı\n"
-"Linuksda ttyS0'dır."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (Linuks Yükləyici) və Grub açılış sistem yükləyiciləridir: sistemi "
-"Linuks\n"
-"ya da kompüterinizdə olan başqa bir əməliyyatiyle aça bilərlər.\n"
-"Əsasən bu digər əməliyyat sistemləri doğru bir şəkilde təsbit edilib "
-"açılışa\n"
-"qurula bilərlər. Əgər bir problem olarsa, buradan əllə əlavə edilə "
-"bilərlər.\n"
-"Parametrlər mövzusunda diqqətli olun."
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Linuksu açmaq üçün lazımi bilgilərin harada saxlanılacağına qərar verin.\n"
-"\n"
-"Nə etdiyinizi bilmirsinizsə, \"Diskin ilk sektoru (MBR)\" seçin."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX PCI SCSI adapterleri axtarmağa cəhd edəcək. Əgə DrakX SCSI\n"
-"taparsa və hansı sürücü işlədiləcəyini bilərsə, her şey öz özünə\n"
-"qurulacaq.\n"
-"\n"
-"\n"
-"Əgər sisteminizdə SCSI adapteri yoxsa, DrakXin tanımayacağı bir\n"
-"ISA SCSI və ya PCI SCSI adapteri var isə, sizə sisteminizdə SCSI\n"
-"adapteri olub olmadığı soruşulacaq.\n"
-"Əgər SCSI adapteriniz yox isə, \"Yox\" tıqlayın. Əgər \"Var\"ı "
-"tıqlayarsanız.\n"
-"qarşınıza sürücüləin siyahısı çıxacaq, oradan sizə uyanını seçərsiniz.\n"
-"\n"
-"\n"
-"Əgər əllə qurmağı səçərsəniz, o zaman DrakX sizə adapterin xüsusiyyətlərini\n"
-"soruşacaq. İmkan verin ki, DrakX sərbəstcə özü xüsusiyyətləri tapsın.\n"
-"Çoxunda bu işə yarayır.\n"
-"\n"
-"\n"
-"Əgər istəmirsəniz isə, o zaman adapter üçün xüsusiyyətləri özünüz\n"
-"göstərməlisiniz. Bunun üçün İstifadəçinin Əl Kitabçasına\n"
-"(başlıq 3, \"Avadanlığınız üçün kollektiv mə'lumat) bölməsinə\n"
-"baxın. Ya da avadanlığınızın əl kitabçasından və ya\n"
-"veb səhifəsindən (Əgər internetə çıxışınız var isə)\n"
-"ya da Microsoft Windowsdan (Əgər sisteminizdə qurulu isə)\n"
-"mə'lumat alın."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Burada yaboot üçün həm başqa əməliyyat sistemləri, həm alternativ "
-"kernellər,\n"
-" ya da təcili yardım açılış əksləri əlavə edə bilərsiniz.\n"
-"\n"
-"\n"
-"Başqa OSlər  üçün girişin mənası ad və kök çığırından ibarətdir.\n"
-"\n"
-"\n"
-"Linuks üçün mühtəməl girişlər bunlar ola bilər: \n"
-"\n"
-"\n"
-"  - Ad: Bu sadəcə olaraq yaboot üçün açılacaq sistemi timsal edən bir "
-"addır.\n"
-"\n"
-"\n"
-"  - Əks: Bu isə açılacaq çəkirdəyin, yə'ni kernelin adıdır.  Çox vaxt bu "
-"vmlinux və ya\n"
-"bunun variasiyalarıdır.\n"
-"\n"
-"\n"
-"  - Kök: Linuks qurulumunun kök avadanlığı və ya '/'.\n"
-"\n"
-"\n"
-"  \n"
-"  - Əlavə: Apple avadanlıqlarında kernel əlavə seçənəkləri ilə sıxlıqla "
-"başlanğıc\n"
-"video avadanlığı və ya sıx sıx xəta verən 2ci və 3cü siçan düymələri üçün "
-"emulyasiya\n"
-"imkanları tanına bilir.  Məsələn bunlar \n"
-"bir neçə nümunədir:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: Açılış avadanlığından əvvəl bə'zi açılış modullarını seçmək\n"
-"üçün işlədilir, ya da təcili yardım açılışlarında ramdisk əksini yükləmək "
-"imkanı verir.\n"
-"\n"
-"\n"
-"  - Initrd-size: Ana ramdisk böyüklüyü ümumiyyətlə 4096 baytdır.  Əgər daha "
-"geniş ramdisk bildirə\n"
-"bilərsiniz isə bu seçənəyi işlədin.\n"
-"\n"
-"\n"
-"  - Oxuma-yazma: Normalda sistemin 'dirilməsindən' əvvəl bə'zi sınaqların "
-"aparıla bilməsi üçün\n"
-"'root' fayl sistemi bu moda soxulur.  Bu seçənəyi nəzərə almayabilərsiniz.\n"
-"\n"
-"\n"
-"  - NoVideo: Bəlkə Apple video avadanlığı problem çıxarda bilər.Onda bu "
-"seçənəklə\n"
-"sistemi 'novideo' modda təbii framebuffer dəstəyi ilə aça bilərsiniz.\n"
-"\n"
-"\n"
-"  - Əsas: Bu seçənəklə Linuks sistemi əsas əməliyyat sistemi halına gətirə "
-"bilərsiniz.\n"
-"Onda ENTER düyməsinə basmaqla Linuks sistemi açılacaqdır.  Bu giriş ayrıca "
-"TAB ilə açılış seçkilərinə baxdığınız vaxt \n"
-"'*' işarətilə işıqlandırılacaqdır."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot NewWorld MacIntosh avadalığı üçün açılış idarəcisidir. Ayrıca\n"
-"GNU/Linuks, MacOS, və ya MacOSX sistemlərini kompüterinizdə varsa, "
-"açacaqdır.\n"
-"Normalda, bu əməliyyat sistemləri düzgün tapılıb qurula bilirlər\n"
-"Əgər belə olmazsa, bu ekrandan əllə lazımi qurğuları girə bilərsiniz.\n"
-"Düzgün parametrləri girib girmədiyinizi yaxşıca bir yoxlayın.\n"
-"\n"
-"\n"
-"Yaboot ana seçənəkləri:\n"
-"\n"
-"\n"
-"  - Başlanğıc İsmarıcı: Açılışdan əvvəl çıxan sadə bir ismarıc.\n"
-"\n"
-"\n"
-"  - Açılış Avadanlığı: GNU/Linuksu hardan başlatmaq istədiyinizi bildirir."
-"Ümumiyyətlə bu mə'lumatı daha əvvəl \"bootstrap\" quraşdırılması "
-"sırasındabildirmiş olacaqsınız.\n"
-"\n"
-"\n"
-"  - Açıq Firmware Gecikməsi: LILOdan fərqli olaraq, yabootda iki dənə "
-"gecikmə vardır\n"
-"Birinci gecikmə saniyələrlə ölçülür və bu arada siz\n"
-"CD, OF açılışı, MacOS və ya Linuks arasında seçki aparmalısınız.\n"
-"\n"
-"\n"
-"  - Kernel Açılış Vaxt Dolması: Bu vaxt dolması LILO açılış gecikməsinə "
-"uyğun gəlir.  Linuksu\n"
-"seçdikdən sonra ana kernel parametri olaraq bu gecikmə 0.1 saniyə olaraq "
-"qurulu olacaqdır.\n"
-"\n"
-"\n"
-"  - CD Açılışı Fəallaşsınmı?: Bu seçənəklə CDdən açılışı timsal edən 'C' "
-"xarakteri ilk açılışda çıxacaqdır.\n"
-"\n"
-"\n"
-"  - OF Açılışı Fəallaşsın?: Bu seçənəklə OFdən (Open Firmware) açılışını "
-"timsal edən 'N' xarakteri\n"
-"ilk açılışda çıxacaqdır.\n"
-"\n"
-"\n"
-"  - Ana OS: OF gecikməsi müddəti dolduğu vaxt hansı OSnin açılacağını "
-"göstərir."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Linuks Mandrakeni yükləmak üçün sürücüyü seçin.\n"
-"Diqqətli olun, sürücüdəki bütün mə'lumatlar silinəcək\n"
-"və geri gəlməyəcək."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Sürücüdəki bütün bilgiləri və bölmələri silmək üçün\n"
-"\"Oldu\" düyməsinə basın. Diqqətli olun,\"Oldu\" düyməsinə basdıqdan sonra\n"
-"Windows bilgiləri də daxil olmaq üzərəbütün bölmə mə'lumatı geri dönməyəcək "
-"şəkildə silinəcək.\n"
-"\n"
-"\n"
-"Bölmədəki mə'lumatları qoruyaraq \"Ləğv et\" düyməsinə\n"
-"əməliyyatı ləğv edə bilərsiniz."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"bu vericiləri seçdiniz: %s\n"
-"\n"
-"\n"
-"bu vericilər əsasən fəallaşdırılır. Onların heç bir təhlükəsizlik\n"
-"problemləri yoxdur, amma bə'zi xətalar tapıla bilər. Belə olsa, mümükün olan "
-"ən yaxın zamanda güncəlləməlisiniz.\n"
-"\n"
-"\n"
-"Bu vericiləri qurmaq istəyirsiniz?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NİS domeyni olmadan translasiya işlədilə bilməz"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "%s sürücüsünə FAT şəkilləndirilmiş bir disket taxın"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Bu floppi FAT şəklində deyildir"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Bu saxlanmış paketlər seçkisini işlətmək üçün qurulumu ``linux "
-"defcfg=floppy''ilə başladın."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "%s faylı oxunurkan xəta oldu"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sisteminizdaki bə'zi avadanlıqlar işləməsi üçün düzgün sürücülərə ehtiyac "
-"duyar.\n"
-"Bunun haqqında %s də/a lazımi malumatları tapa bilərsiniz"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Bir root disk bölümüna ehtiyacınız var.\n"
-"Bunun üçün istər mövcud bir disk bölümü üzərina tıqlayın, \n"
-"ya da yeni birini başdan yaradın. Sonra \"Bağlama \n"
-"Nöqtəsi\"nə gəlin va burayı '/' olaraq dəyişdirin."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Bir swap sahəsinə ehtiyacınız var"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Bir swap sahəniz yoxdur\n"
-"Davam edim?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Bir swap sahəsinə ehtiyacınız var"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Boş sahəni istifadə et"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Yeni bölmələr üçün boş sahə yoxdur"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Var olan bölmələri işlədimmi"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Bölmə cədvəli qurtarılmağa çalışılır"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Loopback üçün Windows bölməsini işlət"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Linuks4Win'i qurmaq üçün hansı disk bölməsini istifadə edəcəksiniz?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Böyüklüklərini seçin"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Kök (root) bölməsi böyüklüyü (Mb): "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Swap sahəsi böyüklüyü (Mb): "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Windows bölməsindəki boş sahəni işlət"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Hansı bölmənin böyüklüyünü dəyişdirəcəksiniz?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Fat fayl sistemi ucları hesaplanır"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT tədqiqatçımız sizin bölümləri işlədə bilmir,\n"
-"bu xəta oldu: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Sizin Windows bölümü çox dağınıqdır. Daxiş edirik, əvvəlcə birləşdirin "
-"(defraq)"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"DİQQƏT!\n"
-"\n"
-"DrakX \"Windows\" disk bölmənizin böyüklüyünü dəyişdirəcək. Bu iş \n"
-"tehlükəli ola bilər. Aşina deyil isəniz qurulumdan çıxın və \"Windows\" \n"
-"altında \"Scandisk\" (lazım gələrsə \"defrag\" da) proqramını çalışdırın. "
-"Ardından quruluma \n"
-"davam edin. Verilərinizin yedəyini almağı da unutmayın!"
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Hansı sektora daşımaq istəyirsiniz?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "bölmə %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT böyüklüyü dəyişdirilməsi bacarılmadı: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr "FAT bölməsi yoxdur ya da loopback üçün lazımi yer buraxılmayıb"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Bütün diski sil"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "\"Windows\"u sil"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Sizin birdən çox diskiniz var, linux qurmaq üçün hansını istifadə "
-"edəcəksiniz?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"%s bölüməsinin böyüklüyü dəyişdirildikdən sonra bu bölmədəki bütün "
-"mə'lumatlar silinəcəkdir"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Hazırkı disk bölmələndirməsi"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Fdisk istifadə et"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"İndi %s sabit diskinizi bölmələndirə bilərsiniz\n"
-"İşinizi bitirdiyinizdə `w' ilə qeyd etməyi unutmayın"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Heç Windows disk bölməniz yoxdur!"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX bölmə sehirbazı bu yolu tapdı:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Bölmə cədvəli növü: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Şəbəkə fəallaşdırılır"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Şəbəkə dayandırılır"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Bir xəta oldu, fəqət necə düzəldiləcəyini bilmirəm.\n"
-"Davam edin, riski sizə aitdir!"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "%s bağlama nöqtəsini çoxalt"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Bəzi paketlər doğru olaraq qurulumu bitirmədi.\n"
-"cdrom sürücünüz ya da cdromunuz düzgün işləmir.\n"
-"Əvvəldən Linuks qurulu bir sistemdə \"rpm -qpl Mandrake/RPMS/*.rpm\"'yi\n"
-"istifadə edərək Cd-Rom'u yoxlayın.\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "%s Sisteminə Xoşgəlmişsiniz"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Disket sürücü yoxdur"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Başlanğıc addımı `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Sizin sisteminizin qaynaqları çatışmır. Qurulum ərzində problem yaşaya "
-"bilərsiniz\n"
-"Bu baş verərsə mətn aracılığı ilə qurulumu sınamalısınız. Bunun üçün "
-"dəCDROMdan başlatdığınız zaman,\n"
-" 'F1'ə basın və 'text' yazaraq enter'ə basın."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Qurulum Sinifi"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Xahiş edirik aşağıdakı qurulum siniflərindən birisini seçiniz:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Seçdiyiniz paket qruplarının ümumi böyüklüyü təximən %d MBdır.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Bu böyüklükdən daha azını yükləmək istəsəniz,\n"
-"qurmaq istədiyiniz paket faizini seçin.\n"
-"100%%'i seçərsəniz bütün paketlər qurulacaqdır."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Sabit diskinizdə bu paketlərin sadəcə olaraq %d%%'sini quracaq qədər yer "
-"var.\n"
-"Bundan daha azını qurmaq istəsəniz,\n"
-"daha az bir faiz sadəcə ən vacib paketləri ;\n"
-"%d%% isə qurula biləcək bütün paketləri quracaqdır."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Sonrakı addımda daha geniş bir seçki qabağınıza gələcəkdir."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Qurulacaq paketlərin faizi"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Paket Qrup Seçkisi"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Fərdi paket seçkisi"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ümumi böyüklük: %d / %d Mb"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Xətalı paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ad: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Buraxılış: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Böyüklüyü: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Əhəmiyyət: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Bu paketi seçə bilməzsiniz, çünki qurmaq üçün yer çatmır."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Aşağıdakı paketlər qurulacaqdır"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Aşağıdakı paketlər sistemdən silinəcəklər"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Bu paketi seçə bilməzsiniz/sistemdən çıxarda bilməzsınız"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Bu lazımlı bir paketdir, sistemdən çıxardıla bilməz"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Bu paketi sistemdən çıxarda bilməzsınız. Artıq qurulmuşdur."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Bu paket yenilənməlidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Bu paketi sistemdən çıxarda bilməzsiniz. Yenilənməlidir"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Avtomatik seçili paketləri göstər"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Qurulum"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Disketə qeyd et"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Paket seçkilərini saxla"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Qurulumdan çıx"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Qurmaq istədiyiniz paketləri seçin"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Qurulur"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Təxmini olaraq hesaplanır"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Qalan müddət"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Xahiş edirik gözləyin, qurulum hazırlanır"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paket"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "%s paketi qurulur"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Qəbul Et"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Rədd Et"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Cd-Romu dəyişdirin!\n"
-"\n"
-"\"%s\" adlı Cd-Romu sürücünüzə taxın və OLDU'ya basın.\n"
-"Əgər Cd-Rom əlinizdə deyilsə bu Cd-Rom'dan qurmamaq üçün İMTİNA ET'ə basın."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Yenə də davam edək?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Paketləri istərkən bir xəta oldu:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Paketlər qurulurkən bir xəta oldu:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a şəbəkə. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Bir xəta oldu"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Şəbəkəni yenidən başlatmaq istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lisenziya sözləşməsi"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Linuks-"
-"Mandrake distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Linuks-Mandrake distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Linuks-Mandrake sites  which are prohibited or restricted in "
-"some countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Linuks-Mandrake\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klaviatura"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Klaviatura quruluşunu seçiniz."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Bütün mövcud klaviaturaların siyahısı"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Hansı qurulum sinifini istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Qurulum/Güncəlləmə"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Bu bir qurulum mu, yoxsa güncəlləməmidir?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Tövsiyə edilən"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Usta"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Güncəlləmə"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Paket seçkilərini saxla"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Siçan Qapısı"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Siçanınızın bağlı olduğu serial Qapıyı seçin."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Düymə emulyasiyası"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Düymə 2 emulyasiyası"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Düymə 3 emulyasiyası"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kartlar qurulur..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE qapıları qurulur"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "uyğun bölmə tapılmadı"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Bağlama nöqtələri üçün bölmələr daranır"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Bağlama nöqtələrini seçin"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Bölmə cədvəlinizi oxuya bilmirəm, dəyəsən biraz xarab olub:-(\n"
-"Xarab olmuş bolmələri düzəltməyə çalışacam.\n"
-"Amma bütün mə'lumatlar itəcəkdir.\n"
-"Başqa bir yol isə DrakXin bölmə cədvəllərini yoxlamasını "
-"passivləşdirməkdir.\n"
-"(xəta %s)\n"
-"\n"
-"Bütün bölmələri itirmək istəyirsiniz?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake bölmə cədvəlini oxumağı bacara bilmədi.\n"
-"Özünüz davam edə bilərsiniz."
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Şəkilləndiriləcək disk bölmələrini seçin"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Kök (root) Bölməsi"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Sisteminizin kök (/) bölməsi hansıdır?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Bölmə cəvəlindəki dəyişikliklərin daxil olması üçün kompüterinizi yenidən "
-"başlatmalısınız."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Şəkilləndiriləcək disk bölmələrini seçin"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Xətalı bloklar sınansınmı?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Bölmələr şəkilləndirilir"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s faylı yaradılır və şəkilləndirilir"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Qurulumu bitirmək üçün lazımi sahə yoxdur, xahiş edirik əlavə edin"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Mövcud olan paketlər axtarılır."
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Güncəllənəcək paketlar tapılır"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Sisteminizdə qurulum ya da güncəlləmə üçün lazımi boş yer yoxdur(%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Hamısı (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Ən az (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Tövsiyə edilən (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Disketdən geri çağır"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Disketdən geri çağır"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Paket Qrup Seçkisi"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "%s sürücüsünə bir disket taxın"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Disketə qeyd et"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Seçili böyüklük var olandan daha böyükdür"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Aşağıdakı siyahıdakı bütün CD'lərə sahib isəniz, OLDU'ya basın.\n"
-"CD'lərin heç birinə sahib deyilsəniz, İMTİNA ET'ə basın.\n"
-"CD'lərdən bə'ziləi əksik isə, onları seçili vəziyyətdən çıxardıb OLDU'ya "
-"basın."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" adlı Cd-Rom"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Qurulum hazırlanır"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"%s paketi qurulur\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Qurulum sonrası qurğular"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "%s sürücüsünə bir disket taxın"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "%s sürücüsünə boş bir disket yerləşdirin"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"İndi şifrləmə üçün istifadə ediləcək tə'minatı endirə bilərsiniz.\n"
-"DİQQƏT:\n"
-"\n"
-"Bu tə'minata bə'zi fərqli ümumi ehtiyaclardan və müxtəlif\n"
-"mühakəmə haqlarından ötrü, bu tə'minatın son istifadəçisi, qanunların ona "
-"bu\n"
-"tə'minatı internetdən endirmə və saxlama haqqını verdiyindən əmin "
-"olmalıdır.\n"
-"\n"
-"Əlavə olaraq, müşdəri va/və ya son istifadəçi xüsusilə, yerləşdiyi mühakəmə "
-"yerinin\n"
-"qanunlarını çeynəmədiyindən əmin olmalıdır. Müşdəri və/və ya son istifadəçi\n"
-"qanunların əmr etdiyi şərtləri pozduğu zaman ciddi cəzalara\n"
-"mə'ruz qalacaqdır.\n"
-"\n"
-"Xüsusi ya da dolaylı zərərlərə (gəlir azalması, işin pozulması, ticari "
-"mə'lumat\n"
-"itkisi və digər maddi itkilər) yol açan heç bir hadisədə nə Mandrakesoft, nə "
-"də \n"
-"istehsalatçıları və/va ya qaynaq vericiləri məs'ul tutulmazlar. Bu "
-"tə'minatı\n"
-"internetden endirirkən son istifadəçi bu sözləşməyi qəbul etdiyini \n"
-"bəyan etmiş sayılır.\n"
-"\n"
-"\n"
-"Bu sözləşməylə əlaqədər hər cür sual üçün xahiş edirik\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA\n"
-"ünvanına yazınız."
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Əks ünvanına bağlantı qurulur"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Paketleri almaq üçün bir əks ünvanı seçin"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Əks ünvanına bağlantı qurulur"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Sisteminiz hansı məqsədlə istifadə ediləcək?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Avadanlıq saatınız GMT-yə göra quruludur mu?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS Verici"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Çap Edicisiz"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Başqa var?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Mündəricat"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Siçan"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Vaxt Dilimi"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Çap Edici"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN kartı"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Səs kartı"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV kartı"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "NIS istifadə et"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Yerli Çap Edici"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Root parolunu qur"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Parolsuz"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Bu parol çox sadədir (en az %d xarakter boyunda olmalıdır)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Tanıtma"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Tanıtma"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Verici"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS sahəsi"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Verici"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Xüsusi bir açılış disketi, Linuks sisteminizin normal bir sistem yükləyiciyə "
-"lüzüm\n"
-"olmadan açılmasına imkan verər. Əgə sisteminizə lilo (ya da grub) "
-"qurmayacaqsanız,\n"
-"ya da başqa bir əməliyyat sistemi liloyu silərsa ya da lilo "
-"avadanlığınızlaişləməzsə\n"
-"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
-"rəsmini\n"
-"istifadə edərək də bu disket yaradıla bilər.\n"
-"Açılış disketi yaratmaq istəyirsiniz?\n"
-"Açılış disketi yaratmaq istəyirsinizsə, birinci disket sürücüyə disket "
-"yerləşdirin\n"
-"və \"OLDU\" basın."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "İlk disket sürücü"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "İkinci disket sürücü"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Nəzərə Alma"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Xüsusi bir açılış disketi, Linuks sisteminizin normal bir sistem yükləyiciyə "
-"lüzüm\n"
-"olmadan açılmasına imkan verər. Əgə sisteminizə lilo (ya da grub) "
-"qurmayacaqsanız,\n"
-"ya da başqa bir əməliyyat sistemi liloyu silərsa ya da lilo "
-"avadanlığınızlaişləməzsə\n"
-"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
-"rəsmini\n"
-"istifadə edərək də bu disket yaradıla bilər.\n"
-"Açılış disketi yaratmaq istəyirsiniz?\n"
-"Açılış disketi yaratmaq istəyirsinizsə, birinci disket sürücüyədisklet "
-"yerləşdirin\n"
-"və \"OLDU\" basın.\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Bağışlayın, disket sürücü yoxdur"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Açılış disketi yaratmaq üçün istifadə ediləcək disket sürücüyü seçin"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "%s sürücüsünə bir disket taxın"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Açılış disketi yaradılır"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Açılış yükləyici hazırlanır"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "aboot istifadə etmək istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"aboot qurulumunda xata, \n"
-"ilk disk bölməsini yox etsə belə yenə də qurulmasını istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Sistem yükləyicini qur"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Açılış yükləyicisi qurulumu iflas etdi. Xəta:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Siz Open Fİrmware açılış avadanlığınızı açılış yükləyicisini\n"
-"fəallaşdırmaq üçün dəyişdirməli ola bilərsiniz. Əmr-Seçənək-O-F düymələrini\n"
-" yenidən başlarkən basın və bunları girin:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Sonra da bunları yazın: shut-down\n"
-"Bir sonrakı başlanğıcda açılış yükləyicisi sətirini görməlisiniz."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "%s sürücüsünə boş bir disket yerləşdirin"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Avtomatik qurulum disketi hazırlanır"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Bə'zi bölmələr bitdi.\n"
-"\n"
-"Həqiqətən də çıxmaq istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-#, fuzzy
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Təbriklər, quruluş bitdi.\n"
-"Cdrom və disketi çıxartdıqtan sonra Enter'ə basaraq kompüterinizi \n"
-"yenidən başladın. Linuks Mandrake'nin bu buraxılışındakı yamaqlar haqqında \n"
-"mə'lumat almaq üçün http://www.mandrakelinux.com ünvanından Errata'ya "
-"baxın.\n"
-"Sisteminizin qurğuları haqqında daha geniş bilgiyi Linuks Mandrake \n"
-"İstifadəçi Kitabcığında tapa bilərsiniz."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Avtomatik qurulum disketi hazırlanır"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Avtomatik qurulum disketi hazırlanması seçilərsə,\n"
-"bütün sabit disk mə'lumatı daxil ediləcəkdir!!\n"
-"(yə'ni başqa sistemi də qura bilmək üçün).\n"
-"\n"
-"Bu qurulumu takrar etmək istəyə bilərsiniz axı.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Avtomatlaşdırılmış"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Təkrarla"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Paket seçkilərini saxla"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Linuks-Mandrake Qurulumu %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> irəli/geri  |  <Boşluq> işarətlə  |  <F12> sonrakı ekran"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu əksikdir"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Monitorunuzu seçin"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Ətraflı"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Xahiş edirik gözləyin"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Mə'lumat"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Ağacı Aç"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Ağacı Qapat"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Otaq və grup sıralaması arasında gəz"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Xətalı tərcih, təkrar sınayın\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Seçkiniz? (əsas %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Seçkiniz? (əsas %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Seçənəklər: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "aboot istifadə etmək istəyirsiniz?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Seçkiniz? (əsas %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Çex dili (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Almanca"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "İspanca"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Fincə"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Fransızca"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norveçcə"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polyakca"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rusca"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "İsveçcə"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "İngiliz (UK) klaviaturası"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Amerikan (US) klaviaturası"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Farsca"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Ermenicə (köhnə) "
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Ermenicə (yazı maşını)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Ermenicə (fonetik)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azərbaycanca (latın)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belçika dili"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Ermenicə (fonetik)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulqarca"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilya dili (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusca"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "İsveçcə (Alman sırası)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "İsveçcə (Fransız sırası)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Çex dili (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Almanca (ölü düymələr olmasın)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danimarka dili"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norveçcə)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estoniya dili"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gürcü dili (\"Rus\" sırası)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gürcü dili (\"Latın\" sırası)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Yunanca"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Macarca"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Xırvatca"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "İsrail"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "İsrail (Fonetik)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Farsca"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "İzlandiya dili"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "İtalyanca"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Yaponca 106 düyməli"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreya klaviaturası"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latın Amerika dili"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvaniya dili AZERTY (köhnə)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanya dili AZERTY (yeni)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanya dili \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanya dili \"Fonetik\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Yeri"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedoniya dili"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Hollandiya dili"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polyakca (QWERTY sırası)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polyakca (QWERTZ sırası)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portuqalca"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Fransızca (Kanada/Quebec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rusca (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rusca (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rusca (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovencə"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakca (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakca (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azərbaycanca (kiril)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Cədvəl"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai klaviatura"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Thai klaviatura"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Türkcə (ənənəvi \"F\" klaviatura)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Türkcə (müasir \"Q\" klaviatura)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrayna dili"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Amerikan (US) klaviaturası (beynəlmiləl)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vyetnam dili \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavca (latın/kiril)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Dairəvi bağlama %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Məntiqi ciltləri birinci olaraq sil\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Siçan"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Sıravi PS2 Çərxli Siçan"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 düymə"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Sıravi 2 Düyməli Siçan"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Ümumi"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Çərx"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serial"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Sıravi 3 Düyməli Siçan"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (serial ya da köhnə C7 növü)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 düyməli"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 düyməli"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "heç biri"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Siçansızs"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Xahiş edirik siçanınızı seçin"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Siçanınızı işə salmaq üçün,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "TƏKƏRİ OYNADIN!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Qurtar"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Sonrakı ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Əvvəlki"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Doğrudur?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "İnternetə bağlan"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"ADSL ilə internetə bağlanmanın ən yaxşı yolu pppoe'dur.\n"
-"Bəzi bağlantılar pptp istifadə edir, çox azı isə dhcp işlədir.\n"
-"Bilmirsiniz isə 'pppop istifadə et'i seçin"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dhcp istifadə et"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pppoe istifadə et"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pptpe istifadə et"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Hansı dhcp alıcısını istifadə edəcəksiniz?\n"
-"Əsası dhcpcd dir"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Sisteminizdə heç bir eternet şəbəkə adapteri tapıla bilmədi.\n"
-"Bu bağlantı şəklini qura bilmərəm."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Şəbəkə ara üzünü seçin"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "İnternetə bağlanmaq üçün şəbəkə adapteri seçin."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "şəbəkə kartı tapılmadı"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Şəbəkə Qurğuları"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Xahiş edirik kompüterinizın adını girin.\n"
-"Məsələn``kompüteradı.sahəadı.com''.\n"
-"Əgə şəbəkə keçidi istifadə edirsinizsə bunun da IP nömrəsini girməlisiniz."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Ev sahibi adı"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Şəbəkə Quraşdırılması Sehirbazı"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Xarici ISDN kart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Daxili ISDN kart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ISDN bağlantınızın növü nədir?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Oddan divar (Firewall) quruluşu tapıldı!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Oddan divar (Firewall) quruluşu tapıldı!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN quraşdırılması"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"İnternet xidmət vericinizi seçin.\n"
-"Siyahıda deyilsə Siyahıda deyil'i seçin."
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Açılış Protokolu"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Avropa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Bütün dünya"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Bütün dünya \n"
-" D-Channel'lə xaric (kiralıq xətlər)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Hansı protokolu istifadə etmək istəyirsiniz?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Hansı növ kartınız var?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Bilmirəm"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"ISA kartınız var isə sonrakı ekrandakı qiymətlər doğru olmalıdır.\n"
-"\n"
-"PCMCIA kartınız var isə kartınızın irq və ya io'sunu bilməlisiniz.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Dayandır"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Davam et"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Hansısı sizin ISDN kartınızdır?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ISDN PCI kart tapdım, amma növünü bilmirəm. Xahiş edirik sonrakı ekrandakı "
-"kartlardan birini seçin."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Heç bir ISDN PCI kart tapılmaı. Sonrakı ekrandakılardan seçin."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Çevirməli şəbəkə seçənəkləri"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Bağlantı adı"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefon nömrəsi"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Giriş adı"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skript əsaslı"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal əsaslı"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Sahə(domain) adı"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Birinci DNS Vericisi (arzuya görə)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "İkinci DNS Vericisi (arzuya görə)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraşdıra "
-"bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Bağlantınızı yenidən quraşdıra bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Artıq İnternetə bağlısınız."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"İstəsəniz İnternetə bağlana bilərsiniz ya da yeniden quraşdıra bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Hələ İnternetə bağlı deyilsiniz."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Bağlan"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Bağlantını kəs"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Şəbəkəni qur"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "İnternet bağlantısı & quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraşdıra "
-"bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraşdıra "
-"bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Şəbəkədən quraşdırması apardığınız üçün şəbəkəniz artıq qurulmuş olmalıdır.\n"
-"Şəbəkə/İnternet bağlantınızı yenidən quraşdırmaq üçün Oldu'ya yoxsa Ləğv "
-"et'ə basın.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Şəbəkə Quraşdırma Sehirbazına Xoç Gəldiniz\n"
-"\n"
-"İnternet/Şəbəkə qurğularınızı edəcəyik.\n"
-"Avtomatik təsbit istəmirsiniz isə işarəti qaldırın.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Qurulacaq profili seçin"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Avtomatik təsbit işlət"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Avadanlıqlar tanınır..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normal modem təsbiti"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "%s qapısında tapıldı"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN Bağlantısı"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s tapıldı"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "%s ara üzündə tapıldı"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabel bağlantısı"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Kabel bağlantısı"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "eternet kart tapıldı"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "İstifadə edəcəyiniz vasitəni seçin"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Bağlantınızı açılışda başlatmaq istəyirsiniz?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Şəbəkənin yenidən başladılması sırasında xəta oldu: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Təbrik edirik, internet və şəbəkə quraşdırılması qurtardı.\n"
-"\n"
-"Qurğular indi sisteminizə əlavə ediləcək.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Bu edildikdən sonra Xdən çıxmağınızı tövsiyyə edirik, yoxsa\n"
-"verici adı xəsarətləri meydana gələ bilər."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"DİQQƏT: Bu avadanlıq daha əvvəl İntenetə bağlanmaq üçün qurulmuşdur.\n"
-"Avadanlığın qurğularını dəyişdirmaək istəmirsiniz isə,\n"
-"OLDU ya basın.\n"
-"Aşağıdakı girişləri düzəltməniz özünü əvvəlki qurğuların üstünə yazacaqdır."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr "Xahiş edirik bu kompüter üçün IP qurğularını girin"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "%s şəbəkə avadanlığı qurulur"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (sürücü %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP ünvanı"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Avtomatlaşdırılmış IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ünvanı 1.2.3.4 şəklində olmalıdır"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Xahiş edirik kompüterinizn adını girin.\n"
-"Məsələn``kompüteradı.sahəadı.com''.\n"
-"Əgər şəbəkə keçidi istifadə edirsinizsə bunun da IP nömrəsini girməlisiniz."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS verici"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Keçit avadanlığı"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Vəkil vericilər quraşdırılması"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP vəkil verici"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP vəkil verici"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Vəkil verici http://... şəklində olmalıdır."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Vəkil verici ftp://... olmalıdır."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "İnternete girişi indi sınamaq istəyirsiniz?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Bağlantınız sınanır..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "İnternetə artıq bağlısınız"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Təhlükəsizlik səbəbi ilə indi bağlantı qopacaqdır."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Sisteminiz İnternetə bağlı deyil.\n"
-"Bağlantını yenidən quraşdırın"
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Bağlantı quraşdırılması"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Xahiş edirik aşağıdakıları doldurun ya da seçin"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kart IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kart mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kart IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kart IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kart IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Sizin şəxsi telefon nömrəniz"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "İnternet xidmət vericinizin adı (məsələn azeronline.com)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "İXM telefon nömrəsi"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Dns xidmətcisi 1 (arzuya görə)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Dns xidmətcisi 2 (arzuya görə)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Klaviaturanızı seçin"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Yığma modu"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Bağlantı növü:"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Bağlantı növü:"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Hesab Girişi (istifadəçi adı)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Hesap Parolu"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "bağlama iflas etdi: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Bu platformda genişlədilmiş bölmələr dəstəklənmir"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Bölmə cədvəlinizdə bir boşluq var, amma o da işlədilə bilməz.\n"
-"Bu boşluğu, birinci bölmənizi en yaxınındakı genişlədilmiş bölməyə "
-"daşıyaraq\n"
-"məsələni həll edə bilərsiniz."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s faylından qurtarılışda xəta: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "%s faylına yazarkən xəta oldu"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Bə'zən sürücünüzdə pis şeylər ola bilər.\n"
-"Datanın bütövlüyü yoxlaması bacarılmadı. \n"
-"Bu o demekdir ki diskə yazılan hər şey təsadüfi olacaqdır"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "alınmalı"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "vacib"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "əla"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "gözəl"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "bəlkə"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Yerli Çap Edici"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Uzaq çap edici vericisi(lpd)"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Şəbəkə Çap Edicisi (soket) "
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Çap Edici Vericisi"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Çap Edici avadanlığı URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Yerli Çap Edici"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "%s faylına yazarkən xəta oldu"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modul %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS verici IP"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Əsas)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Çap Edici Bağlantısı Seçin"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Çap ediciniz nə şəkildə bağlıdır?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Uzaq CUPS vericiləri üçün heç bir quraşdırmağa lüzüm yoxdur\n"
-"Buradakı hər çap edici avtomatik tapılacaqdır.\n"
-"Olmazsa \"Uzaq CUPS vericisi\" ni seçin."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ünvanı 1.2.3.4 şəklində olmalıdır"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Qapı nömrəsi rəqəmlə yazılmalıdır"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS verici IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Qapı"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Qurulum Tərzi Quraşdırılması"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Avadanlıqlar tanınır..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Qapıları sına"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Çap Edicisiz"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Yerli Çap Edici"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Avtomatik təsbit işlət"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s tapıldı"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Çap Edici avadanlığı URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Yerli Çap Edici"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Çap Edici avadanlığı URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Quraşdırma"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "%s paketi qurulur"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "%s paketi qurulur"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Uzaqdakı bir lpd çap edici növbəsini istifadə etmək üçün, \n"
-"çap edicinin bağlı olduğu çap edici vericisinin adını və növbə \n"
-"adınını verməlisiniz."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Uzaqdakı ev sahibi adı"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Uzaqdakı ev sahibi adı"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Uzaqdakı ev sahibi adı"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Çap Edici Seçənəkləri"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Bir SMB çap edicidən yekun almaq üçün, SMB kompüter adı, çap edici "
-"vericisinin\n"
-"IP ünvanı, çap edicinin paylaşdırma adı, işləmə grupu, istifadəçi adı və \n"
-"parol verilməlidir."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB verici adı"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB verici IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Paylaşdırma adı"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "İş qrupu"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare Çap Edici Qurğuları"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"NetWare çap edicidən yekun almaq üçün, NetWare vericisinin adı və çap "
-"edici \n"
-"növbəsi adı ilə istifadəçi adı va parolu verilməlidir."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Çap Edici Vericisi"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Çap Edici Növbə Adı"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Soket Çap Edici Qurğuları"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Soket çap edicidən yekun almaq üçün, çap edicinin ev sahibi  adını ve "
-"mümkünsə, qapısının nömrəsini verməlisiniz."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Çap Edici Ev sahibi"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Çap Edici Ev sahibi"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Çap Edici avadanlığı URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Çap edici adı"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "İzah"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Yeri"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Doğrudur?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Çap Edici Bağlantısı"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Nə cür bir çap ediciniz var?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Çap edicini sınamaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Qapıları sına"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Bəli, hər iki sınaq səhifəsini də çap et"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Çap Edici"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standart"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
-"Çap edicinin işləməsi üçün bir az vaxt keçər.\n"
-"Çap vəziyyəti:\n"
-"%s\n"
-"\n"
-"Düz mü işləyir?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
-"Çap edicinin işləməsi üçün bir az vaxt keçər.\n"
-"Düz mü işləyir?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Çap Edicisiz"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Qapat"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Şəbəkə dayandırılır"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Şəbəkə dayandırılır"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Çap edici seçənəkləri"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Çap edici adı təkcə hərf, rəqəm və alt xətt daxil edə bilər"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Çap Edicisiz"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Bağlantınız başladılır..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Şəbəkəni qur"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor qurulmayıb"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Şəbəkə Qurğuları"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Yüksək"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Şübhəci"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Çap Edici Bağlantısı Seçin"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Çap Edicini Qur"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "%s paketi qurulur"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Çap edici seçənəkləri"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Çap Edicini Qur"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Bir çap edici qurmaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Çap Edici"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Aşağıda yazıçıdakı növbələr verilmişdir.\n"
-"Yenilərini əlavə edə bilər, və ya mövcud olanları dəyişdirə bilərsiniz."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Aşağıda yazıçıdakı növbələr verilmişdir.\n"
-"Yenilərini əlavə edə bilər, və ya mövcud olanları dəyişdirə bilərsiniz."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Şəbəkəni qur"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normal Mod"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Çap Edici Bağlantısı"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Yerli Çap Edici"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Şəbəkəni yenidən başlatmaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Vəkil vericilər quraşdırılması"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Qapı"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Vəkil verici http://... şəklində olmalıdır."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Qapı nömrəsi rəqəmlə yazılmalıdır"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Vəkil verici ftp://... olmalıdır."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Avtomatik Giriş"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Parol"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Parolsuz"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Parollar uyğun gəlmir"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Şəkilləndirilmiş RAID md%d-yə disk bölməsi əlavə edilə bilinmədi"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "%s faylına yazıla bilinmədi"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid iflas etdi"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid iflas etdi (raidtools əksik ola bilər mi?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "%d səviyyə RAID üçün çatmayan sayda disk bölməsi\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA səs sistemini (Advanced Linux Sound Architecture) başlat"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anakron, periodik əmr zamanlayıcısı"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd batareya vəziyyətini izləmək üçün və syslog aracılığıyla bunun qeydini "
-"tutmaq üçün istifadə edilir.\n"
-"Ayrıca batareya azaldığında sistemi qapatmaq üçün də istifadə edilir."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"at əmri, zamanlanan əmrləri işləmələri lazım gələn vaxtda işlədir.\n"
-"Sistem yükü lazımi qədər alçaq olduğunda yığma əmrləri işlədilir."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron, istifadəçilərə xüsusi əmrləri periodik olaraq işə sala bilən\n"
-"standart bir UNIX proqramıdır. vixie cron, standart cron'a əlavə edilmiş bir "
-"çox\n"
-"yeni xüsusiyyət daxildir."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM, Midnight Commander kimi mətn əsaslı tə'minatlara siçan dəstəyi əlavə "
-"edər.\n"
-"Ayrıca konsolda siçanla kəsmə və yapışdırma əməliyyatlarına da imkan verər.\n"
-"Konsolda pop-up menyu dəstəyi verər."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake texniki tə'minat sınağı aparar və onları bir ön quraşdırmadan "
-"keçirər."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache bir World Wide Web vericisidir. HTML faylları və CGI verilməsi üçün "
-"istifadə edilir."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (qısaca inetd ) bir çox \n"
-"başqa internet xidmətcisini lazım gəldiyi zaman işa salır. İçində telnet, "
-"ftp, rsh və rlogin kimi proqramın olduğu xidmətləri işə salmaqla məs'uldur.\n"
-"inetd-ni sistemden çıxarmaq, onun məs'ul olduğu bütün xidmətləri\n"
-"rədd etmək mənasını daşıyır."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Linuks 2.2 seriyası çəkirdəklərində firewall\n"
-"qurmaq üçün üçün paket süzülməsini başlat."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Bu paket /etc/sysconfig/keyboard'dakı seçili klaviatura düzülüşünü yüklər.\n"
-"Hansı klaviatura düzülüşü istifadə ediləcəyi kbdconfig ilə seçilir.\n"
-"Bu, mandrake qurulan bir çox kompüterdə fəal buraxılmalıdır."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"/usr/include/linux/{autoconf,version}.h üçün \n"
-"/boot-da avtomatik çəkirdək başlığı yaradılması."
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Texniki avadanlığın açılışda avtomatik təsbiti və qurulması."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf sistem qurğularınızı idarə edən proqramları\n"
-"müxtəlif vəzifələri açılışda icra edər."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd, lpr'nin düzgün olaraq işləməsi üçün lazımi çap edici vasitəsidir.\n"
-"lpd əsasən, çap vəzifələrini idarə edən və onları çap ediciyə göndərən "
-"vericidir."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linuks Virtual Verici, yüksək qabiliyyətli vericilər qurmaq üçün işlədilir."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) verici adlarını IP ünvanlarına çevirən\n"
-"Sahə Adı Vericisidir(DNS)."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Bütün Şəbəkə Fayl Sistemlərini (NFS), SMB (Lan Manager/Windows), və \n"
-"NCP (NetWare) bağlama nöqtələrini bağlar və ayırır."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Açılış sırasında başlamaq üçün qurulmuş bütün şəbəkə axtar üzlərini "
-"fəallaşdırır ya da qapatır."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir "
-"protokoldur.\n"
-"Bu xidmət, /etc/exports faylında qurğuları olan NFS vericisinin\n"
-"istifadəsinə imkan verər."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir \n"
-"protokoldur. Bu xidmət NFS fayl qıfılı istifadəsinə imkan verər."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Açılışda XFree və konsolda numlock düyməsini\n"
-"avtomatik olaraq aç."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w və uyğun Windows çap edicilərini dəstəklə."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA dəstəyi, laptoplarda eternet və modem kimi avadanlıqların "
-"dəstəklənməsinə imkan verər.\n"
-"Qurulmadığı vaxtda açılışda işləməz, işləməsinə ehtiyac olmayan\n"
-"kompüterlərdə qurulu olması problem yaratmaz."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper, NFS ve NIS kimi protokollar tərəfindən istifadə edilən RPC \n"
-"bağlantılarını təşkilatlandırır. Portmap vericisi RPC mexanizmini işlədən\n"
-"protokollarla xidmət edən kompüterlərdə qurulmalıdır və işlədilməlidir."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Posfix, elektronik məktubların bir kompüterdən digərinə yollayan \n"
-"Elektronik Məktub Yollama Vasitəsidir."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Yüksək keyfiyyət təsadüfi rəqəm istehsal edən sistem entropi hovuzunun \n"
-"saxlanması və yenidən köhnə halına gətirilməsinə imkan verər."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed vasitəsi avtomatik IP router cədvəlinin RIP protokolu tərəfindən\n"
-"yenilənməsinə imkan verər. RIP əsasən kiçik şəbəkələrdə istifadə edilir, "
-"daha böyük\n"
-"şəbəkələrdə daha qarışıq routing protokollarına ehtiyacı vardır."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokolu bir şəbəkədəkı istifadəçilərin o şəbəkədəkı hər hansı bir\n"
-"kompüter haqqındakı qabiliyyət ölçüləri ala bilmələrinə imkan verər."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokolu bir şəbəkədəkı istifadəçilərin o şəbəkədəkı kompüterlərdə\n"
-"işləyən istifadəçiləri görməsinə imkan verər."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokolu, uzaq istifadəçilərin, rwho vasitəsi işlədən bir kompüterdə\n"
-"olan bütün istifadəçiləri görmələrina imkan verər."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Kompüterinizdə səs sistemı başladın"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog, bir çox vasitənin ismarıclarını müxtəlif sistem qeydlərində\n"
-"tutmalarına imkan verər. Syslog'un hər zaman işləməsi\n"
-"yaxşı fikirdir."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "USB avadanlığınız üçün sürücüləri yükləyin."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"X Font Vericisini açılışda işə salar (Bu, XFree icrası üçün məcburidir)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Açılışda avtomatik olaraq başlayacaq xidmətləri seçin"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Çap Edici"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "İnternet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Sistem modu"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Databeyz"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "avadanlıq"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "işləmir"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "dayandırılıb"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Xidmətlər və vasitələr"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Bu xidmət haqqında təəsüf ki,\n"
-"əlavə mə'lumat yoxdur."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Açılışda"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Hal:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Bütün dünya"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "İnternet imkanı"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedya - Qrafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Təcrübi"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "İdarə Mərkəzi"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Şəbəkə ara üzü"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB verici adı"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Oyunlar"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Usta"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "%s paketi qurulur"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Bölmə cədvəlini oxuya bilmirəm, dəyəsən biraz xarab olub:-(\n"
-"Xəsərli hissələri düzəltməyə cəhd edəcəm"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Xəta"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Qurulum sonrası qurğular"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Qurulum Tərzi Quraşdırılması"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Təbriklər!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Qurulum"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "İstifadəçi əlavə et"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Loopback faylı şəkilləndirilir: %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Paket Qrup Seçkisi"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Növbəni sil"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "\"Windows\"u sil"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "İstifadəçi adı"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Xahiş edirik siçanınızı seçin"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Xahiş edirik təkrar sınayın"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Xahiş edirik təkrar sınayın"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Parolsuz"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Çap Edici Bağlantısı Seçin"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Klaviatura quruluşunu seçiniz."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Xahiş edirik siçanınızı seçin"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Şəbəkə ara üzü"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "İstifadəçi adı"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Sabit disk seçkisi"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "İstifadəçi adı"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Çərx"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Çərx"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Modul seçənəkləri:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Fayl sistemi qurğuları"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Seçənəklər"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Disketdən geri çağır"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Digər"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Sistemi qur"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Fayldan geri çağır"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Fayldan geri çağır"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Xüsusi"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Yardım"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Əvvəlki"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Hal:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Fayldan geri çağır"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Sonrakı ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Qurulacaq paketləri seçin"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Fayla qeyd et"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Xahiş edirik siçanınızı seçin"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Fayl sistemi qurğuları"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s qurulumu iflas etdi. Olan xəta:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "şəbəkə kartı tapılmadı"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Qurtardı"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Qurulum hazırlanır"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "məhdudlaşdır"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "məhdudlaşdır"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Bölmə şəkilləndirilməsi"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Bağlama nöqtəsi"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Şəkilləndiriləcək disk bölmələrini seçin"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "İş Yeri"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Dayandır"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Çap Edici"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Sistemi qur"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Fayl seç"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Uzaq Çap Edici"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "İnit İsmarıcı"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Siseminizdə şəbəkə adapteri yoxdur!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Qurulum"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Siseminizdə şəbəkə adapteri yoxdur!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Qurulumdan çıx"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi fəallaşdırıldı"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n"
-"Və artıq fəallaşdırılmışdır.\n"
-"\n"
-"Nə etmək istəyirsiniz?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "passivləşdir"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "keç"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "yenidən quraşdır"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Vericilər bağlanır..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "İnternet Bağlantısı Bölüşdürülməsi indi bağlandı"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi passivləşdirildi"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n"
-"Və artıq passivləşdirilmişdir.\n"
-"\n"
-"Nə etmək istəyirsiniz?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "fəallaşdır"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Xidmətlər fəallaşdırılır..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "İnternet Bağlantısı Bölüşdürülməsi indi açıldı"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Kompüterınızi İnternet bağlantısını bölüşdürmək üçün quraşdırırsınız.\n"
-"Bu seçənəklə yerli şəbəkənizdəki başqa kompüterlər sizin İnternet "
-"bağlantınızdan faydalana biləcəklər.\n"
-"\n"
-"Xəbədarlıq: Yerli Şəbəkə (LAN) qurmaq üçün uyğun Şəbəkə Adapterinə "
-"ehtiyacınız var."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Ara Üz %s (%s modulu işlədilir)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Ara üz %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Siseminizdə şəbəkə adapteri yoxdur!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Sisteminizdə şəbəkə kartı tapıla bilməyib.Avadanlığı quran vasitəni işə "
-"salın."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Şəbəkə ara üzü"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sistemnizdə bir dənə qurulmuş şəbəkə adapteri var:\n"
-"\n"
-"%s\n"
-"\n"
-"Yerli Şəbəkə adapterinizi qurmaq üzərəyəm?"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Sizi Yerli Şəbəkəyə bağlayacaq adapteri seçin"
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor qurulmayıb"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Qurulum Tərzi Quraşdırılması"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS verici IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "%s quğusunda dəyəsən bir LAN ünvan çaxışması tapıldı!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Oddan divar (Firewall) quruluşu tapıldı!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Diqqət! Var olan Firewall qurğusu tapıldı. Yükləmədən sonra bir az əl "
-"gəzdirə bilərsiniz."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Quraşdırılır..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Skriptlə qurulur, proqram tə'minatı qurulur, xidmətlər başladılır..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "%s paketi qurulurkən xəta oldu"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Hər şey quruldu.\n"
-"İndi isə İnternet bağlantınızı yerli şəbəkədəkı başqa kompüterlər ilə "
-"bölüşdürə bilərsiniz, bunun üçün isə avtomatik şəbəkə quraşdırılması (DHCP) "
-"işlədilir."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Quraşdırma artıq qurtarıbdır, amma fəaliyyəti dayandırılıb."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Quraşdırma artıq qurtarıbdır və fəaliyyətdədir."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "İnternet Bağlantısı Bölüşdürmə Quraşdırması aparılmayıb."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "İnternet bağlantısı bölüşdürülməsi quraşdırılması"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"İnternet Bağlantısı Bölüşdürmə vasitəsinə Xoş Gəldiniz!\n"
-"\n"
-"%s\n"
-"\n"
-"Quraşdırma sehirbazını açmaq üçün Quraşdıra tıqlayın."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Şəbəkə quraşdırılması (%d adapter)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Profili sil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Silinəcək profil:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Yeni profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Ev sahibi adı:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "İnternet imkanı"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Növ: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Keçit:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Ara üz"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Hal:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "İnternet keçişini Qur..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Sürücü"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Ara üz"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Hal:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Yerli Şəbəkəni Quraşdır..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Sehirbaz..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Əlavə Et"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Lütdən Gözləyin... Qurğular əlavə edilir"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Bağlandı"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Bağlı deyil"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Bağlan..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Bağlantını Kəs..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Qurulu ara üzünüz yoxdure.\n"
-"Əvvəlcə onları  'Quraşdır'a basaraq qurun"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "%s Adapteri: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Açılış Protokolu"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Açılışda başladılır"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP alıcısı"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Fəal"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Fəal"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Heç İnternet bağlantınız yoxdur.\n"
-"Əvvəlcə onları  'Quraşdır'a basaraq qurun"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "İnternet bağlantısı quraşdırılması"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "İnternet Bağlantısı Quraşdırılması"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Bağlantı növü:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametrlər"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Keçit"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Eternet Kartı"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP Alıcısı"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Təhlükəsizlik səviyyəsinin quraşdırılması"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "İdarə Mərkəzi"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "İstifadə edəcəyiniz vasitəni seçin"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Fransızca (Kanada/Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Avropa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "İzlandiya dili"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Avropa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "serial"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "istifadə qaydası: keyboarddrake [--expert] [klavatura]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Klaviatura quruluşunu seçiniz."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Konsolda BackSpace'in Silmə funksyasını görməyini istəyirmisiniz?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Cd-Romu dəyişdir"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Qurma Cd-Romunu sürücünüzə taxın və OLDUya basın.\n"
-"Əgər Cd-Rom əlinizdə yox isə, bu Cd-Rom-dan qurmamaq üçün RƏDD ETə basın."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Təkmilləşdirmə işi başlaya bilmir !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Təkcə bu gününkünü göstər"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fayl/_Yeni"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>Y"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fayl/_Aç"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fayl/_Qeyd Et"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>Q"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fayl/_Fərqli Qeyd Et"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fayl/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Seçənəklər"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Seçənəklər/Sınaq"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Yardım"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Yardım/_Haqqında..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "İstifadəçi adı"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "ismarıclar"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "sistem qeydi"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "axtar"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Qeydlərinizə baxan vasitə"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Qurğular"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "oxşayır"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "amma oxşamır"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Fayl seç"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Təqvim"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Fayl məzmunu"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "xahiş edirik, gözləyin, fayl daranır: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache və Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "avadanlıq"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Şəkilləndirilir"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Quraşdırma"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Fərqli qeyd et..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_USB avadanlığı tapılmadı\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "3 düymə emulasiyası"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Ekran kartınızı seçin"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Açılış avadanlığı"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Firewall quraşdırılması"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Firewall quraşdırılması"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Firewall qurğularını artıq qurtarmısınız.\n"
-"Qur-a tıqlayaraq firewall qurğuların silin ya da təkmilləşdirin."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Qur-a tıqlayaraq standart firewall qurğularını aparın."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "İşlətdiyiniz dili seçin"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Quruluş sinifini seçin"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Sabit disk seçkisi"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Siçan qurğuları"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Klaviaturanızı seçin"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Təhlükəsizlik"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Fayl sistemi qurğuları"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Bölmə şəkilləndirilməsi"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Qurulacaq paketləri seçin"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Sistemi qur"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "İstifadəçi əlavə et"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Şəbəkəni qur"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Xidmətləri qur"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Sistem yükləyicini qur"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Açılış disketi yarat"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X qur"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Sistemi qur"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Qurulumdan çıx"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall configurator\n"
-"\n"
-"Bu, Linuks Mandrake sisteminiz üçün şəxsi bir firewall quraşdıracaqdır.\n"
-"Daha güclü və e'tibarlı sistem üçün xahiş edirik xüsusi MandrakeSecurity "
-"Firewall\n"
-"buraxılışını tədqiq edin."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"İndi isə internetə bağlanırkən istifadə etməyi arzuladığınız xidmətləri\n"
-"soruşacağıq. Bu suallara xahiş edirik diqqətlə cavab verin, çünkü "
-"kompüterinizin \n"
-"təhlükəsizliyi çox vacib məsələdir.\n"
-"\n"
-"Xahiş edirik, bu xidmətlərdən istifadə etmədiklərinizə yaxşı qərar verin ki, "
-"firewall\n"
-"onu bağlasın. Sonradan bu qurğuları özünüz proqramı yenidən işə salaraq "
-"dəyişdirə bilərsiniz.!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Sisteminizdə bütün İnternetə göstərmək istədiyiniz veb vericisi "
-"işlədirsiniz? \n"
-"Təkcə bu kompüterin görəcəyi bir veb vericisi olacaqsa burada YOX cavasbı "
-"verə bilərsiniz.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Bu kompüterdə ad vericisi işlədirsiniz? Əgər internetə bağlanırkən bir IP "
-"ünvanı və\n"
-"nahiyə mə'lumatı almırsınızsa YOX cavabı verin.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Gələn E'tibarlı Qabıq (ssh) bağlantılarına icazə vermək istəyiriniz? Bu, "
-"bir\n"
-"cür telnet əvəzidir. İndi telnet işlədirsinizsə onda \"ssh\"yə "
-"keçməlisiniz. \n"
-"Telnet kodlama işlətmir, ona görə dəbə'zi həkerlər parolunuzu oğurlaya "
-"bilər. \n"
-"ssh bunlara icazə verməz."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Gələn telnet bağlantılarına icazə verim?\n"
-"Bu çox e'tibarsızdır. Bunu sizə əvvəlki ekranda söylədik. Buna \n"
-"yox cavabı verməyinizi tövsiyyə edirik. Yerinə ssh işlədin.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"İnternetdən yetişilə bilən bir FTP vericisi işlədirsiniz? Əgər "
-"işlədirsinizsə,\n"
-"təkcə Anonim köçürmələr üçün olmasını tövsiyyə edərik. FTP ilə göndərilən\n"
-"parollar həkerlər tərəfindən oğurlana bilər. FTP parolları kodlaya bilmir "
-"axı.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Burada məktub vericisi işlədirsiniz? Əgər ismarıclarınızı pine\n"
-"mutt və ya başqa mətn əsaslı məktub alıcısından göndərirsinizsə,\n"
-"demək ki, işlədirsiniz.  Yoxsa firewall bunu bağlamalıdır.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Burada POP və ya IMAP vericisi işlədirsiniz? Bu isə\n"
-"kompüterdə veb əsaslı olmayan məktub hesabları qurmaq üçün lazımdır.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Dəyəsən 2.2 çəkirdək işlədirsiniz. Əgər kompüterinizin\n"
-"IPsi başqa bir kompüter tərəfindən dinamik olaraq verilirsə,\n"
-"onda buna icazə vermək olar. Beledir?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Kompüterinizin vaxtı başqa bir kompüterlə sinxronlaşdırır?\n"
-"Bu, daha çox orta və geniş Unix/Linuks şirkətləri tərəfindən işlədilir.\n"
-"Əgər bir şirkətin bir parçası deyilsinizsə, demək ki, işlətmirsiniz."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Qurulum qurtarıldı. Dəyişiklikləri diskə yazım?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "%s açıla bilmir: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Yazmaq üçün %s açıla bilmir: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Firewall quraşdırılması"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Xahiş edirik gözləyin, qurulum hazırlanır"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Verici, Veb/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Şəbəkə Kompüteri (alıcı)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS vericisi, SMB vericisi, SSH vericisi, Vəkil Verici"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "İş Yeri"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome iş stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm Pilot və ya Visorunuz üçün vasitələr"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Masa üstü"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Verici, Firewall/Ruter"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domeyn Ad bə Şəbəkə Mə'lumat Vericisi"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"İdarə proqramları: kəlmə işləyənlər (kword, abiword), hesablayıcılar və pdf "
-"göstəriciləri, vs."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-"Səs ilə əlaqədər vasitələr: mp3 və ya midi çalğıçılar, qarışdırıçılar, vs."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Linuks və pulsuz proqram tə'minatıları Kitablar və Howtoları"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE iş stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, vs."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedya - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Məktub, xəbərlər, fayl daşınması, chat vasitələri"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Databeyz"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL və ya MySQL databeyz vericisi"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Kompüter qurğularını asandlaşdıran vasitələr"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedya - Səs"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Vasitələr"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Sənədlər"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsol Vasitələri"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix məktub vericisi, Inn xəbər vericisi"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "İnternet stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedya stansiyası"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Başqa qrafiki ara üzlər (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "KDE, əsas qrafiki ara üz və yardımçi proqramlar kolleksiyası"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Qrafiki Ara Üz"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache və Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CD yazmaq və yandırmaq proqramları"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "İş Yeri Stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Verici"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, IceWM, Windows Maker, Enlightement, Fvwm, vs."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Qrafika proqramları, məsələn The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C və C++ inkişaf kitabxanaları, proqramları və daxil ediləcək fayllar"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Şəbəkə Kompüteri vericisi"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Verici, ePoçt/Groupware/Xəbərlər"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Oyun stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video çalğıçıları və editorları"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedya - Qrafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Məzəli proqramlar: arkad, lövhə oyunları, strategiya, vs"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Elektronik məktub və xəbər oxuyucusu (pine, mutt, tin..) və Web səyyahları"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arxivləmə, emulyatorlar, izləmə"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Şəxsi Maliyyə"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"İstifadəçi dostu proqram və masa üstü ilə bərabər qrafiki ara üz vasitələri"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "SSH daxil bir çox protokolların alıcıları"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "İnternet keçişı"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Səs və video çalınması/düzəliş proqramları"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Başqa qrafiki ara üzlər"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editorlar, rəflər, fayl vasitələri, terminallar"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Şəxsi maliyyə idarəçiləri, məsələn gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Şəxsi Mə'lumat İdarəçisi"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedya - CD Yandırma"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Elmi iş stansiyası"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Dayandır"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "Qurtardı"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Əsas istifadəçini seçin:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Uzaq Çap Edici"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "İndi %s moduluna parametrlər girə bilərsiniz."
-
-#~ msgid "mount failed"
-#~ msgstr "bağlama iflas etdi"
-
-#~ msgid "Low"
-#~ msgstr "Alçaq"
-
-#~ msgid "Medium"
-#~ msgstr "Orta"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Bu təhlükəsizlik səviyyəsi üçün əlavə olaraq artırılmış təhlükəsizlik "
-#~ "xəbərdarlığı və \n"
-#~ "yoxlama var."
-
-#~ msgid "Boot mode"
-#~ msgstr "Açılış modu"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Usta"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Linuks zamanı GMT-yə (Greenwich Mean Time) görə qurğular və olduğunuz \n"
-#~ "yerdəki zamana görə lazımi dəyişiklikləri edər."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "İnternetə bağlantı"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "İnternetə bağlantını kəs"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Şəbəkə (İnternet/LAN) bağlantınızı quraşdırın"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Hansı diskə daşımaq istəyirsiniz?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Mə'lumat"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome iş stansiyası"
-
-#~ msgid "authentification"
-#~ msgstr "tanıtma"
-
-#~ msgid "user"
-#~ msgstr "istifadəçi"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server.  It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "Apache bir World Wide Web vericisidir. HTML faylları və CGI verilməsi "
-#~ "üçün istifadə edilir."
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) verici adlarını IP ünvanlarına çevirən\n"
-#~ "Sahə Adı Vericisidir(DNS)."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Çıx"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Taxılıb sökülə bilən avadanlıqların avtomatik bağlanması"
-
-#~ msgid "Active"
-#~ msgstr "Fəal"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Xeyr"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "\"%s\" modelində bir çap edici tapıldı:"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Yerli Çap Edici Avadanlığı"
-
-#~ msgid "Printer Device"
-#~ msgstr "Çap Edici Avadanlığı"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Uzaq CUPS vericisi"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Uzaq CUPS vericisi"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linuks"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Sistem modu"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Digər"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Klaviatura quruluşunu seçiniz."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Növ: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Xətalı yedəkləmə faylı"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "X qur"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Çap Edici Avadanlığı"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Ləğv et"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Oldu"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Qapat"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Bağlantınız başladılır..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Bağlantınız kəsilir..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "Bağlantı kəsildi. Buna əllə kökdə\n"
-#~ "/etc/sysconfig/şəbəkə-scripts/net_cnx_down\n"
-#~ "əmrini icra edərək nail ola bilərsiniz."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Sistem indi bağlantısını kəsib."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Qurmaq istədiyiniz paketləri seçin"
-
-#~ msgid "Total size: "
-#~ msgstr "Hamısı: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Xahiş edirik gözləyin, "
-
-#~ msgid "Total time "
-#~ msgstr "Ümumi müddət"
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "X11 qurğuları üçün mövcud qurğulardan istifadə edək?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Çap ediciniz hansı avadanlığa bağlıdır? \n"
-#~ "(/dev/lp0, LPT1'nin qarşılığıdır)\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr "Diqqət, şəbəkə adapteriniz onsuz da qurulub. Yenidən quracam."
-
-#~ msgid "New"
-#~ msgstr "Yeni"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Uzaqdakı növbə adı"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Qarışıqlıq (%s), daha aydın yazın\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (əsas %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Seçkiniz (əsas %s, yoxsa `none' yazın) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "/etc/sysconfig/autologin  oxunmaq üçün açıla bilmir: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Şəbəkəni yenidən başlatmaq istəyirsiniz?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Razısınız?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Şəbəkə avadanlığını yenidən başlatmalıyam:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "%s avadanlığını yenidən başladacam. Razısınız?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Başqa bir şəkildə seçilməmiş isə, ümumiyyətlə bu seçki \"/dev/hda\" \n"
-#~ "(Birinci ali IDE disk) ya da \"/dev/sda\" (birinci SCSI disk)\n"
-#~ "olacaqdır."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Bağlantı növü:"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Əsas istifadəçini seçin:"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Siçanınızı buradan sınayın."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Qurulma və sistem istifadəsi üçün bir dil seçin."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Davam edə bilmək üçün yuxarıdakı lisenziyanın maddələrini qəbul "
-#~ "etməlisiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xahiş edirik, maddələrlə razı isəniz \"Qəbul\" düyməsinə basın.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xahiş edirik, maddələrlə razı deyilsəniz ,\"Rədd\" düyməsinə basın\n"
-#~ "Yükləmə indiki qurğularınız dəyişdirilmədən bitiriləcək."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Yuxarıdakı siyahıdan klaviaturanıza uyöun gələn düzülüşü seçiniz"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Əgər yükləmədən sonra işlətmək üçün fərqli dillər (yükləmənin əvvəlində "
-#~ "seçdiyinizdən) seçmək istəyirsinizsə,\n"
-#~ "xahiş edirik, onları yuxarıdakı siyahıdan seçin.\n"
-#~ "Əgər hamısını seçmək istəyirsiniz isə \"Hamısını\" seçin."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Seç:\n"
-#~ "\n"
-#~ "  - Xüsusi: Əgər Linuksa aşina isəniz  bu seçənəyə tıqlayın.\n"
-#~ "    Sonra sistemin sinifini seçə biləcəksiniz.\n"
-#~ "     Ayrınrılar üçün aşağıya baxın.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Usta: Əgər GNU/Linuks haqqında yaxşı bilik sahibi isəniz bunu seçin.\n"
-#~ "    Daha sonra \"Xüsusi\" seçkisində olduğu kimi sistemin sinifini seçə "
-#~ "biləcəksiniz.\n"
-#~ "    Ancaq artıq dərəcədə xahiş edirik, NƏ ETDİYİNİZİ BİLMİRSƏNİZ BU  "
-#~ "SİNİFİ SEÇMƏYİN!."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "İndi isə kompüterinizi necə işlədəcəyinizə qerar verin.Seç:\n"
-#~ "\n"
-#~ "* Masa üstü: kompüterinizi gündəlik işlər (idarə işləri, qrafika vs.)\n"
-#~ " üçün istifadə edəcək isəniz, bunu seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Təcrübi: Kompüterinizi proqram tə'minatı inkişafı üçün işlədəcəksəniz, "
-#~ "sizin üçün ideal seçkidir.\n"
-#~ " O zaman qaynaq kodları yazmaq, şəkilləndirmək və xətadan ayıqlamaq və ya "
-#~ "proqram paketləri hazırlamaq üçün lazımi hər cür proqramın daxil olduğu "
-#~ "bir kolleksiya kompüterinizə qurulacaqdır.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Verici: Kompüterinizə Linuks-Mandrakeni verici olaraq işlətmək üçün "
-#~ "quracaqsanız, bu yaxşı bir seçkidir.\n"
-#~ " Bir fayl vericisi (NFS ya da SMB),çap edici vericisi(Unixin lp protokolu "
-#~ "ya da Windows tərzi SMB çap),\n"
-#~ " tanıdıcı verici (NIS), mə'lumat tabanı vericisi və oxşarı...Onda KDE, "
-#~ "GNOME kimi məzəli şeylərin qurulmağını gözləməyin."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "İndi qurmaq ya da güncəlləmək istədiyiniz paket qruplarını\n"
-#~ "seçə bilərsiniz.\n"
-#~ "\n"
-#~ "Sonra DrakX seçdiklərinizi qurmaq ya da güncəlləmək üçün lazımi \n"
-#~ "boş yerinizin olub olmadığını sınayacaq. Əgər yoxsa, sizə bunu \n"
-#~ "söyləyəcək. Nə olursa olsun davam etmək istəsəniz,yükləmə davam edəcək.\n"
-#~ "Amma daha az ehtiyac olan paketlər qurulmayacaq.\n"
-#~ "Siyahının üstündə \"Şəxsi paket seçilməsi\"\n"
-#~ "seçənəyini işarətləsiniz 1000dən artıqpaket arasından seçə bilərsiniz."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "İndi isə siz istədiyiniz paketi qurmaq üçün\n"
-#~ "seçə bilərsiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "Paket pəncərəsi solundakı bucaqdaki seçənəyə tıqlayaraqağacı həm aça\n"
-#~ "həm də sıxışdıra bilərsiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "Paketlərin əlifba sırasına görə düzülməsini istəyirsinizsə\n"
-#~ "\"Otaq və grupu  düz\"\n"
-#~ "düyməsinə basın.\n"
-#~ "\n"
-#~ "\n"
-#~ "Paket ehtiyacları xəbərdarlıqlarını istəmirsəniz \"Avtomatik\n"
-#~ "ehtiyaclar\"ı seçə bilərsiniz.\n"
-#~ "Amma bunu işarətlədiyiniz vaxt unutmayın bir paketin işarətini "
-#~ "qaldırdığınızda\n"
-#~ "ehtiyacı olan digər paketlerin de işarəti səssizcə qalxar."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Yuxarıdakı siyahıdakı bütün CDlərə sahibsəniz, OLDUya tıqlayın.\n"
-#~ "Bu CD'lərin heç birinə sahib deyilsəniz, Ləğv et'i tıqlayın.\n"
-#~ "CD'lərdən bə'ziləri əksiksə, bunları seçili vəziyyətdən çıxarıb OLDUya "
-#~ "tıqlayın."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Kompüterinizi internete və ya yerli networka bağlamaq\n"
-#~ "istəyirsinizsə xahiş edirik doğru xüsusiyəti seçin. Ayrıca DrakXin bunu "
-#~ "tapması üçün avadanlığınızı açın.\n"
-#~ "\n"
-#~ "\n"
-#~ "İnternet və ya yerli networka heç girişiniz yox isə\"Şəbəkə qurğularını "
-#~ "keç\"\n"
-#~ "seçənəyini işarətləyin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Şəbəkə qurğularını sonraya buraxmaq istəyirsinizsəvə ya qurğular bitdiysə "
-#~ "\"Oldu\" seçənəyini işarətləyin."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Modem tapılmadı. Xahiş edirik modemin bağlı olduğu serial qapını seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xəbəriniz olsun, birinci serial qapı (Windows altında\n"
-#~ "\"COM1\") linux altında\"ttyS0\" deyə adlandırılır."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "İndi isə çevirməli bağlantı xüsusiyyətləri seçə bilərsiniz.\n"
-#~ "Əgər bilmirsinizsə və ya ne girəcəyinizə qerar vermədinizsə\n"
-#~ "(Məsələn, İXV (ISP) və DNS nömrələri kimi) bunları\n"
-#~ "daha sonra da internete girərək öyrənə bilərsiniz."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Modeminiz xarici isə modeminizi açın ki DrakX onu avtomatik olaraq tapsın."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Xahiş edirik modeminizi açın ve doğru seçənəyi işarətləyin."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Əgər yuxarıdakılar haqqında mə'lumatınız yox isə və ya ne girəcəyinizə "
-#~ "qərar vermədinizsə\n"
-#~ "(Məsələn, İXV (ISP) və DNS nömrələri kimi)bunları\n"
-#~ "daha sonra da internete girərək öyrənə bilərsiniz."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "İndi isə ev sahibi bilgilərini girin. Ne girəcəyinizə\n"
-#~ "qerar vermədinizsə\n"
-#~ "(Məsələn, İXV (ISP) və DNS nömrələri kimi)bunları\n"
-#~ "daha sonra da internete girərək öyrənə bilərsiniz."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Seç:\n"
-#~ "\n"
-#~ " - IP ünvanı: Əgər IP ünvanını bilmirsinizsə, sistem idarəcisinəya da \n"
-#~ "İnternet xidmət vericisinə danışın.\n"
-#~ "\n"
-#~ " - Şəbəkə maskası: Ümumiyyətlə \"255.255.255.0\" yaxşı bir seçkidir. Əgər "
-#~ "əmin \n"
-#~ "deyilsəniz, yenə sistem idarəcinizə ya da xidmət vericinizəsoruşun.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Avtomatik IP : Əgər networkunuz bootp ya da dhcp protokollarından bir "
-#~ "dənəsini \n"
-#~ "istifadə edirsə bu seçənəyi işarətləyin."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Əgər şəbəkədə NIS işlədilirsə, \"NIS kullan\" seçənəyini işarətləyin. "
-#~ "Əgər \n"
-#~ "bilmirsinizsə sistem idarəcinizə soruşun."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr "İndi ev sahibi adını girin. Bilmirsinizsə boş buraxın."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "İndi çevirməli bağlantı seçənəklərini girə bilərsiniz. Əgər nə yazılması "
-#~ "lazım olduğunu\n"
-#~ "bilmirsinizsə İnternet xidmət vericinizdən lazımi bilgiləri alın."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr "Əgə vəkil (proxy) verici istifadə edacəmsəniz bunları girin."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Əgər İnternet bağlantınız doğru şəkildə qurulmuş isə kriptoqrafik "
-#~ "paketi \n"
-#~ "də qura bilərsiniz. Əvvəl bir əks ünvanı seçin və daha sonra qurulacaq \n"
-#~ "paketləri quraşdırın."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "İndi isə yaşadığınız yerə görə zaman zolağını seçin."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Siz indi yerli və ya çevirməli yazıçını qura bilərsiniz\n"
-#~ "(Unix, Netware və ya Microsoft Windows networkundakı)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Yazdırma funksiyası istəyirsinizsə CUPS və LPR arasında seçici\n"
-#~ "davranmalısınız.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS yeni, güclü ve elastik bir Unix yazdırma sistemidir\n"
-#~ "CUPS yəni \"Common Unix Printing System\". Bu da Linuks Mandrake\n"
-#~ "də əsas yazdırma sistemidir.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR Linuks Mandrakenin köhne sistemidir.\n"
-#~ "\n"
-#~ "\n"
-#~ "Printeriniz yox isə  \"Yox\" düyməsinə tıqlayın."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linuks bir çox çap edici növü işlədə bilər. Hər bir növ\n"
-#~ "müxtəlif quruluş istəyər.\n"
-#~ "\n"
-#~ "\n"
-#~ "Çap ediciniz fiziki olaraq kompüterinizə bağlı isə\n"
-#~ "\"Yerli çap edici\"nı seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Unix sisteminə bağlı çap ediciyə uzaqdan bağlanmaq istəyirsinizsə\n"
-#~ "\"Uzaqdan bağlanılan çap edici\".\n"
-#~ "\n"
-#~ "\n"
-#~ " MS Windows kompüterinə (və ya SMB protokolunu\n"
-#~ "işlədən Unix kompüterinə) bağlı bir çap ediciyə çatmaq üçün\n"
-#~ "\"SMB/Windows95/98/NT\" seçənəyini işarətləyin."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Xahiş edirik DrakXin tapa bilməsi üçün yazıçınızı açın.\n"
-#~ "\n"
-#~ "Burada bir neçə mə'lumat verməlisiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Çap Edici adı: yazıçılar üçün \"lp\" işlədilir.\n"
-#~ "Ona görə də yazıçınızın adı \"lp\" olmalıdır.\n"
-#~ "Bir neçə çap ediciniz var isə istədiyiniz adı verə bilərsiniz. Sadəcə "
-#~ "olaraq ə aralarına boru işarəti \"|\" qoymalısınız.\n"
-#~ "Məsələn \"Mənim yazıçım|lp\".\n"
-#~ "Adında \"lp\" olan çap edici baş çap edici olacaqdır.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Təsvir: İstəyə bağlıdır. Amma bir neçə çap ediciniz var isə\n"
-#~ "bir xeyli faydalı ola bilər.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Yerləşmə: Çap Edicinin yeri haqqında istədiyinizi yaza bilərsiniz."
-#~ "Məsələn, \"2ci mərtəbə\".\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Burada bir neçə mə'lumat verməlisiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "*İstək adı:  yazıçılar üçün \"lp\" işlədilir.\n"
-#~ "Ona görə də yazıçınızın adı \"lp\" olmalıdır.\n"
-#~ "Bir neçə çap ediciniz var isə istədiyiniz adı verə bilərsiniz. Sadəcə "
-#~ "əolaraq aralarına boru işarəti \"|\" qoymalısınız.\n"
-#~ "Məsələn \"Mənim yazıçım|lp\".\n"
-#~ "Adında \"lp\" olan çap edici baş çap edici olacaqdır.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Saxlama qovluğu: Çap Edici sifarişlərinizi saxlanıldığı yer.\n"
-#~ "Mövzudan bixəbər isəniz əsas qurğunu seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Çap Edici bağlantısı: Çap Edici fiziki olaraq kompüterə bağlı ise\n"
-#~ "\"Yerli Çap Edici\" seçin.\n"
-#~ "Uzaq bir Unix sistemə bağlı çap edici isə\"Uzaqdan idarəli lpd Çap Edici"
-#~ "\" seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Uzaq SMB vericisi işlədən Unix və ya Windows sisteminə bağlıyazıçı üçün "
-#~ "isə \"SMB/Windows 95/98/NT\" seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "NetWare şəbəkədə yerləşən çap edici üçün isə\"NetWare\" seçin.\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Sizin çap edici tapılmadı. Xahiş edirik bağlı olduğu avadanlığın\n"
-#~ "adını girin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xəbəriniz olsun, bir çox çap edici birinci paralel qapıya bağlıdır.\n"
-#~ "Bu da GNU/Linuksda \"/dev/lp0\", Windowsda isə \"LPT1\"dir."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "İndi yuxarıdakı siyahıdan çap edici seçmalisiniz."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Xahiş edirik yazıcınız üçün doğru qurğuları girin.\n"
-#~ "Nə seçəcəyinizi bilmirsiniz isə sənədlərə baxın\n"
-#~ "\n"
-#~ "\n"
-#~ "Bir sonrakı addımda yazıcınızı sınaya bilərsiniz və\n"
-#~ "daha sonra da istədiyiniz zaman dəyişdirə bilər."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Linuks sisteminiz üçün bir idarəci parolu verilməlidir. Bu parol\n"
-#~ "yazılış xətalarına meydan verməməsi və e'tibarlı olması səbəbi ilə iki "
-#~ "dəfə\n"
-#~ "girilməlidir.\n"
-#~ "\n"
-#~ "\n"
-#~ "Bu parolu diqqətli seçməlisiniz. Sadəcə idarəi parolunu bilən \n"
-#~ "adamlar sistemi idarə və dəyişiklik edə bilirlər. Ayrıca idarəci \n"
-#~ "parolu ilə sistemə girən bir adam bütün veriləri silib, sistema zərər \n"
-#~ "verə bilər. Seçdiyiniz parol alfanumerik xarakterlər daxil edib en az 8 "
-#~ "xarakter uzunluğunda olmalıdır. Hər hansı bir kağıza, dəftara qeyd\n"
-#~ "alınmamalıdır. Çox uzun bir parol və ya çox qarışıq bir parol işlədilir "
-#~ "isə \n"
-#~ "parolun xatırlanması çətinləşir.\n"
-#~ "\n"
-#~ "\n"
-#~ "İdarəci olaraq sistemə girəcayiniz zaman, giriş sırasında \"login\"\n"
-#~ "yazan qismə \"root\" və \"password\" yazan qismə idarəci parolunu\n"
-#~ "yazmalısınız."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "İndi bir ya da daha çox adamın Linuks sisteminizi istifadə etməsinə "
-#~ "icazə\n"
-#~ "verə bilərsiniz. Hər istifadəçi hesabı üçün edilən dəyişikliklər sadəcə\n"
-#~ "o istifadəçi ve istifadəçinin \"istifadəçi sırası\" üçün hökmlü olar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Sistemi sadəcə siz istifadə edeceksəniz belə ayrı bir istifadəçi hesabı "
-#~ "açaraq\n"
-#~ "normal işler üçün bu hesabı istifadə etməlisiniz. İdarəçi \"root\" "
-#~ "hesabı\n"
-#~ "gündəlik işlərdə istifadə edilməməlidir. Bu bir təhlükəsizlik riski "
-#~ "təşkil edər.\n"
-#~ "Sadə bir istifadəçi hesabı ilə işləmək sizi və sistemi size qarşı\n"
-#~ "qoruyar. İdarəci hesabı olan \"root\" sadəcə, sadə bir istifadəçi hesabı\n"
-#~ "ilə etməyəcəyiniz idarə və təmir işləri üçün istifadə edilməlidir."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Başlanğıc disketi yaradılması aşırı dərəcədə tövsiyyə edilir.\n"
-#~ "Sistemi aça bilmədiyiniz zaman bu, sizin üçün tək qurtuluş yolu olar.\n"
-#~ "Yoxsa sistemi yenidən yükləmək məcburiyyətindəsiniz."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO və grub ana seçənəkləri bunlardır: \n"
-#~ "- Açılış avadanlığı: Açılış sektorunu olduğu sabit disk bölməsini daxil "
-#~ "edən avadanlığın\n"
-#~ "adını təyin edər.\n"
-#~ "Əgər heç bir şey bilmirsinizsə \"/dev/hda\"yı seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "- Əsas əks ilə açmadan əvvəl gecikmə: Açılış sistem yükləyicisinin ilk \n"
-#~ "əksi açmadan əvvəl gözləyəcəyi zamanın, saniyənin onda biri cinsindən "
-#~ "miqdarıdır.\n"
-#~ "Bu, klaviaturanın fəallaşmasından həmən sonra sabit diskdən açılan "
-#~ "sistemlər üçün faydalıdır.\n"
-#~ "Sistem yükləyicisi, əgər \"delay\" sıfır olaraq verilmiş isə\n"
-#~ "heç gözləməz.\n"
-#~ "\n"
-#~ "\n"
-#~ "- Ekran modu: Açılışda bir neçə mətn ekran modu seçilə bilər:\n"
-#~ "   * sadə: 80x25 mətn ekran açılır.\n"
-#~ "    * <rəqəm>: Göstərilənn rəqəmlərə görə mətn ekran rezolyusiyası "
-#~ "quraşdırılır.\n"
-#~ "\n"
-#~ "\n"
-#~ "- \"/tmp\"I hər açılışda təmizlə: Əgər hər açılışda \"/tmp\" cərgəsində "
-#~ "olan bütün\n"
-#~ "olan bütün cərgə və qovluqların silinməsini istəyirsinizsə, bu seçənəyi "
-#~ "seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "- Var olan RAM miqdarı: Təəsüf ki, Linuks həmişə RAM miqdarını BIOSdan "
-#~ "düzgün\n"
-#~ "bir şəkildə öyrənəməyə bilər. Onda siz çzünüz sisteminizdə olan həqiq RAM "
-#~ "miqdarını buradan\n"
-#~ "girə bilərsiniz. Yadda saxlayın ki, həqiqi RAM ilə sistemin tapdığı "
-#~ "miqdar arasında 2\n"
-#~ "və ya 4 MBlıq fərq ola bilər."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO (Linuks Yükləyici) SPARC üçün bir sistem yükləyicidir: sistemi "
-#~ "Linuks\n"
-#~ "ya da kompüterinizdəki başqa bir əməliyyat sistemiylə aça bilirlər.\n"
-#~ "Əsasən bu digər əməliyyat sistemləri doğru bir şəkildə təsbit edilib "
-#~ "açılışa\n"
-#~ "qurula bilərlər. Əgər bir problem olarsa, buradan əllə əlavə edilə "
-#~ "bilərlər.\n"
-#~ "Parametrlər mövzusunda diqqətli olun."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "  - Açılış avadanlığı: Açılış sektorunu olduğu sabit disk bölməsini daxil "
-#~ "edən avadanlığın\n"
-#~ "adını təyin edər.\n"
-#~ "Əgər heç bir şey bilmirsinizsə \"/dev/hda\"yı seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ana əks ilə açmadan əvvəl gecikmə: Açılış sistem yükləyicisinin ilk \n"
-#~ "görünüşü açmadan əvvəl gözləyəcəyi zamanın, saniyənin onda biri cinsindən "
-#~ "miqdarıdır.\n"
-#~ "Bu, klaviaturanın aktivləşməsindən həmən sonra sabit diskdən açılan "
-#~ "sistemlər üçün faydalıdır.\n"
-#~ "Sistem yükləyicisi, əgər delay sıfır olaraq verilmiş isə\n"
-#~ "heç gözləməz."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Buradan etibarən, Linuks GUI (Qrafik İstifadəçi Ara üzü) çəkirdəyini\n"
-#~ "əmələ gətirən X Window sistemini quracağıq. Buna görə də ekran kartınızı\n"
-#~ "və monitorunuzu qurmalısınız. Bu addımların çoxu onsuz da avtomatik "
-#~ "olaraq\n"
-#~ "keçiləcək və sizə sadəcə olaraq tövsiyə edilən qurğuları incələmək və "
-#~ "qəbul etmək\n"
-#~ "düşəcək. :-)\n"
-#~ "\n"
-#~ "\n"
-#~ "Quruluş qurtardığında əgər DrakXdən əksini istəmədiniz isə X Window \n"
-#~ "başlayacaqdır. Qurğuşarınıza baxın və yoxlayın. Qurğularınızı yoxlayaraq\n"
-#~ "uyuşmazlıq olub olmadığına baxın, lazım gəlirsə geriyə dönün."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr "X qurğularında problem olarsa aşağıdakı seçənəkləri istifadə edin."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Əgər sistemə girərkən qrafik arar üzünün gəlməsini istəyirsənız isə \"Bəli"
-#~ "\",əks halda \"Xeyr\" düyməsinə basın."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Sisteminiz üçün təhlükəsizlik səviyyəsini seçə bilərsiniz. Ətraflı "
-#~ "mə'lumat üçün xahiş edirik bələdçiyə\n"
-#~ " baş vurun. Əsasən , nə seçəcəyinizi bilmirsiniz isə buraya heç "
-#~ "toxunmayın.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "İndi sistem yenidən qapanıb açılacaqdır.\n"
-#~ "\n"
-#~ "Açıldıqdan sonra Linuks Mandrake avtomatik olaraq yüklənəcəkdir. Əgər "
-#~ "başqa \n"
-#~ "bir əməliyyat sistemi də işlədəcəksəniz əlavə xəbərdarlıqları oxuyun."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Çex dili (Proqramcılar)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovakca (Proqramcılar)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Yaradılacaq profil adı:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "/etc/fstab-a Yaz"
-
-#~ msgid "Format all"
-#~ msgstr "Hamısını şəkilləndir"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Bütün bölmələri şəkilləndirdikdən sonra, "
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "bu bölmələrdəki bütün verilər itəcəkdir"
-
-#~ msgid "Reload"
-#~ msgstr "Yenidən yüklə"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Linuks köçürülməsi üçün bir dənə avtomatik qurulum disketi yaratmaq "
-#~ "istəyərmisiniz?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL quraşdırılması"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Uzaq CUPS vericiləri üçün heç bir quraşdırmaya lüzüm yoxdur \n"
-#~ "Buradakı hər çap edici avtomatik tapılacaqdır. \n"
-#~ "Əgər uzaq çap edici vericiniz var ise CUPS vercisinin \n"
-#~ "IP ünvanını verməlisiniz. Qapı nömrəsi vacib \n"
-#~ "deyil."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Uzaqdakı növbə adı"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Sahə(domain) adı"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Çap Edicisiz"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Şəbəkə Monitoru"
-
-#~ msgid "Profile "
-#~ msgstr "Profil "
-
-#~ msgid "Statistics"
-#~ msgstr "Statistikalar"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Yollama Sür'əti:"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Alam Sür'əti:"
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Bağlantı növü:"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "İnternetə bağlanılır"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "İnternet ilə bağlantını kəs"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "İnternet ilə bağlantı kəsilməsi bacarılmadı."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "İnternet ilə bağlantı kəsilməsi qurtardı."
-
-#~ msgid "Connection complete."
-#~ msgstr "Bağlantı qurtardı."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Bağlantı iflas etdi.\n"
-#~ "Qurğularınızı Mandrake İdarə Mərkəzindən yoxlayın."
-
-#~ msgid "sent: "
-#~ msgstr "yollandı:"
-
-#~ msgid "received: "
-#~ msgstr "alındı:"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Əsas Runlevel"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Quraşdırma faylının içindəkilərlə oynanılmaz"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Tanınmaz quraşdırma faylı"
-
-#~ msgid "Adapter"
-#~ msgstr "Adapter"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Bağla"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Aç"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "İndi siçanı sınaya bilərsiniz. Hər şeyin yolunda olduğunu \n"
-#~ "sınamaq üçün düymə və çarxı işlədin. Qurğular yaxşı isə\n"
-#~ "problem yoxdur. Əgər deyilsə onda \"Ləğv et\"i tıqlayaraq\n"
-#~ "başqa siçan sürücüsü seçə bilərsiniz."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (və ya ADSL) bağlantısı"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Qapat"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "CUPS ilə çap ediciyə yetişmək üçün URIni verməlisiniz"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Bəli, ASCII sınaq səhifəsi çap et"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Bəli, PostScript sınaq səhifəsi çap et"
-
-#~ msgid "Paper Size"
-#~ msgstr "Kağız Böyüklüyü"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "İş bittikdən sonra səhifə atılsın mı?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint sürücü seçənəkləri"
-
-#~ msgid "Color depth options"
-#~ msgstr "Rəng dərinlik seçənəkləri"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Mətni PostScript olaraq yazdırsın mı?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Mətn pilləli olaraq düzəldilsin mi?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Hər yekun səhifəsinin nömrəsi"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Sağ/Sol boşluqlar nöqtəvi(inch'in 1/72'si"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Üst/Alt boşluqlar nöqtəvi (inch'in 1/72'si)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Əlavə GhostScript seçənəkləri"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Əlavə mətn seçənəkləri"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Tərs səhifə sıralaması"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Çap Edici Bağlantısı Seçin"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Hər çap edicinin bir adı olmalıdır (məsələn lp).\n"
-#~ "Çap edicinin təsviri və yeri də göstərilməlidir.\n"
-#~ "Bu çap edicinin adı nədir və yeri haradadır?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Hər çap edici növbəsinin (çap edici işlərinin yollandığı yer) bir adı "
-#~ "olar \n"
-#~ "(çoxunda lp) və gözləmə qovluğuna ehtiyac duyar. Bu növbə üçün\n"
-#~ "hansı ad və qovluq istifadə edilsin?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Növbənin adı"
-
-#~ msgid "Spool directory"
-#~ msgstr "Gözləmə qovluğu"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Daha e'tibarlı bir sistem üçün \"Kölgə parol işlət\" və \"MD5 kodlama \n"
-#~ "işlət\" seçənəklərini işarətlayin."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Əgər şəbəkədə NIS istifadə edilirsə, \"NIS işlət\" seçəneyini "
-#~ "işarətləyin.  Əgər \n"
-#~ "bilmirsinizsə sistem idarəcinizə soruşun."
-
-#~ msgid "yellow pages"
-#~ msgstr "sarı səhifələr"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "İXM dns 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "İXM dns 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "İnternetə necə bağlanmaq istəyirsiniz?"
diff --git a/perl-install/share/po/b_dump_strings.pm b/perl-install/share/po/b_dump_strings.pm
deleted file mode 100644
index f29275ecd..000000000
--- a/perl-install/share/po/b_dump_strings.pm
+++ /dev/null
@@ -1,113 +0,0 @@
-package b_dump_strings;
-
-use B qw(minus_c save_BEGINs peekop class walkoptree walkoptree_exec
-         main_start main_root cstring sv_undef);
-
-BEGIN { open OUT, ">$ENV{OUTFILE}" }
-
-sub B::CV::debug {
-    my ($sv) = @_;
-    B::walkoptree_exec($sv->START, "debug");
-}
-
-sub B::OP::debug {
-    my ($op) = @_;
-#    print "OP ", class($op), " ", $op->name, "\n";
-    eval {
-	if ($op->name eq 'entersub') {
-	    $op2 = $op->first->first or return;
-
-	    if ($op2->name eq 'pushmark') {
-		my $s = $op2->sibling->sv->PV;
-		my $l;
-		for ($l = $op2->sibling; ${$l->sibling}; $l = $l->sibling) {}
-
-		$s =~ s/"/\\"/g;
-		if ($l->first->sv->NAME eq '_') {
-		    print OUT qq($::pkg _("$s")\n);
-		}
-	    }
-	}
-    };
-}
-sub B::RV::debug {
-    my ($op) = @_;
-    $op->RV->debug;
-}
-sub B::SVOP::debug {
-    my ($op) = @_;
-    $op->sv->debug;
-}
-sub B::PV::debug {
-    my ($sv) = @_;
-#    print "STRING ", $sv->PV, "\n";
-}
-sub B::IV::debug {
-    my ($sv) = @_;
-#    printf "IV\t%d\n", $sv->IV;
-}
-sub B::NV::debug {
-    my ($sv) = @_;
-#    printf "NV\t%s\n", $sv->NV;
-}
-sub B::PVIV::debug {
-    my ($sv) = @_;
-#    printf "IV\t%d\n", $sv->IV;
-}
-sub B::PVNV::debug {
-    my ($sv) = @_;
-#    printf "NV\t%s\n", $sv->NV;
-}
-sub B::AV::debug {
-    my ($av) = @_;
-#    print "ARRAY\n";
-}
-sub B::GV::debug {
-    my ($gv) = @_;
-#    printf "GV %s::%s\n", $gv->STASH->NAME, $gv->SAFENAME;
-}
-sub B::NULL::debug { 
-#    print "NUL\n";
-}
-sub B::SPECIAL::debug {}
-
-sub B::SV::debug { die "SV"; }
-sub B::BM::debug { 
-    die "BM"; 
-}
-sub B::PVLV::debug { die "PVLV"; }
-
-sub B::GV::pgv {
-    my ($gv) = @_;
-#    print $gv->NAME, "\n";
-    $gv->SV->debug;
-    $gv->HV->debug;
-    $gv->AV->debug;
-    $gv->CV->debug;
-}
-
-
-
-
-sub search {
-
-foreach my $pkg (grep { /^[a-z]/ && !/^(diagnostics|strict|attributes|main)/ } grep { /\w+::$/ } keys %main::) {
-    $::pkg = $pkg;
-    foreach (keys %{$main::{$pkg}}) {
-	print STDERR "$pkg $_ XXXXX\n";
-	local *f = *{$main::{$pkg}{$_}};
-	B::svref_2object(\*f)->pgv;
-    }
-}
-print STDERR "DONE\n";
-}
-
-CHECK { search() }
-INIT { exit 0 }
-
-#use lib qw(. /home/pixel/gi/perl-install);
-##use commands;
-#require '/tmp/t.pl';
-#search();
-
-1;
diff --git a/perl-install/share/po/be.po b/perl-install/share/po/be.po
deleted file mode 100644
index 617c278c6..000000000
--- a/perl-install/share/po/be.po
+++ /dev/null
@@ -1,13566 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 MandrakeSoft.
-# Alexander Bokovoy <ab@avilink.net>, 2000
-# Maryia Davidouskaia <maryia@scientist.com>, 2000
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-09-24 12:30 +0100\n"
-"Last-Translator: Alexander Bokovoy <ab@avilink.net>\n"
-"Language-Team: be\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=windows-1251\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:246
-#, fuzzy, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "����i�������� ��� �����"
-
-#: ../../Xconfigurator.pm_.c:249
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "������� ��������i"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "�i��������"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "������� �i��������"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "������� X ������"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X ������"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "������� X ������"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X ������"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "������ XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "���� ����i������� XFree �� ������� ��������?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"��������� 3D-���������� � ����� ��������� �������� ����� � XFree %s.\n"
-"XFree %s ���� ������������� ����� 2D-���������� ��� ����� ���������."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"���� �i�������� ���� ���� 3D-����������, ���� ��������i������ �����i XFree %"
-"s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s � ���������� 3D-����������"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"���� �i�������� ���� ���� 3D-����������, ���� ��������i������ �����i XFree %"
-"s.\n"
-"����� �� �����, ��� ���� ����������������� ��������� I ���� �������I ��\n"
-"���I����� ������ ����'�����."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s � ����������������� ���������� 3D-����������"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"���� �i�������� ���� ���� 3D-����������, ���� ��������i������ �����i XFree %"
-"s.\n"
-"����� �� �����, ��� ���� ����������������� ��������� I ���� �������I ��\n"
-"���I����� ������ ����'�����. ���� �i�������� ��������i������ XFree %s, ��i\n"
-"����� ��������i��� ����� � 2D-�����������."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "��������� XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "�������� ����� �i��������i"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "������� ���������� ��������i ��� �������"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "������� ���i���"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "���i���"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"��� ��������� ��������� - ���� ������� ������������ ��������i, �i\n"
-"������� ��������� ����� ������, � ������� ����� ����� �������� -\n"
-"������� �������������� �i�����i����i ��������i, �i ������� ������\n"
-"����� ������.\n"
-"\n"
-"�����I �����, ��� ������ ���i ���i��� �� ������� �i�����i����i, ����\n"
-"�� ��������� ��������� ���������i ������ ���i����: � ����i������ �������\n"
-"�� ������ ��������� ���i���.\n"
-"���i �� ������������, ������� �������������� ��������i."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "������� �������������� ��������i"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "������� ������������ ��������i"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "���i��� ������ �� ���������"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "�i�������� ���� �� ������i��������"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "������ ������ ���� �� ���������"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "�i ������� �������i������ ��������i?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "������������: ����i������� �� ����� �i�������� ����������"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "�������� ��������� ��������i"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"����������� ����i�� ��������� ���������"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "�������:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "��������� %d �������"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "���� ��������� ��������� ��������i?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "�������� �������, ����������� ����i�� ���������"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "������ ������"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "����� ������ ������ i ����i�i ������"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "�i��������: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "������ XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-#, fuzzy
-msgid "More"
-msgstr "�������"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "��"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Expert Mode"
-msgstr "�������"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "�������� ��"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "������ ������"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "��� ����i�����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "��� ����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "���: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "���i���: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "������� ���.����. ���i����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "������� ����.����. ���i����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "�i��������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "�i��������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "�i���������: %s ��\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "��������� ����i�i ������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "������ ������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "������ XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "������ XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "���������� ��������i X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "��� �� ������� ����i��?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "����i�� ���i���"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "����i�� �i��������"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "����i�� ��������i �������"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "����i�� ������ ������"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "I���������"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "��������� ���� ���"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "�����"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"ֳ ������� �� �������� ��������?\n"
-"������� ������������:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "������ X ��� ������ �i�����"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"����� ������i�� �i����� ��� ������������ ������� X ����� ������ �i�����.\n"
-"�������, ��� X �������� ��� ��������?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "���i �����, �������i�� � %s ��� ��������i ���������"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "���i �����, �����i��, � ����� ����������� Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ������ (8 �i��)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ������ ������ (15 �i��)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ����� ������ (16 �i��)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 �i����� ������ (24 �i��)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 �i�i���� ������ (24 �i��)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 �� �i �����"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "���������� VGA, 640x480 ��� 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 ��� 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "������� � 8514, 1024x768 ��� 87 Hz ����������� (���� 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ��i 87 Hz �����������, 800x600 ��� 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 ��� 60 Hz, 640x480 ��� 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "������������� SVGA, 1024x768 ��� 60 Hz, 800x600 ��� 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "�������������� SVGA, 1024x768 ��� 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "�������������, ��i ������� ��������i���� 1280x1024 ��� 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "�������������, ��i ������� ��������i���� 1280x1024 ��� 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "�������������, ��i ������� ��������i���� 1280x1024 ��� 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "���i���, ��i ������� ��������i���� 1600x1200 ��� 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "���i���, ��i ������� ��������i���� 1600x1200 ��� 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "����� ������ ������������ ��������"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "����� ������ ������� (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "����������� SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "���� �� ������� ���������� ��������� ���������?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "����������� LILO/GRUB"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "������� ����i ����������� ����������"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-#, fuzzy
-msgid "Bootloader to use"
-msgstr "������� ����i ����������� ����������"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "����������� ����������"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "����������� �������"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (�� ������ ��� ������ ����i�� BIOS)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "���������"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "���������"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "�i���-�����"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "�������� ����� ��������� ������� �� ���������"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "������"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "�������� ������"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "����������� ������ ���������� �����"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "�����������"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "�������� /tmp ��� ������ ��������"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "�������� �������� ����� RAM (��������� %d M�)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "�������� ���� ����i���"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "�������� ����� RAM � M�"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"����� ``����������� ������ ���������� �����'' �� ��������������� ��� ������"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "����������� ���� ���"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "�����i �� ���������"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-#, fuzzy
-msgid "Default OS?"
-msgstr "�� ���������"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"� ���� ������ ��������� ������.\n"
-"�� ������ ������ ����, ����� ����i�� i�������."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "������"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "��������"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "����i�� RAID"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "��i ��� ������ ������� ������?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "I���� �� (SunOS,...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "I���� �� (MacOS,...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "I���� �� (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "������"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "��������"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "�������-���i�"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "����i��"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "����������"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "�����"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "�� ���������"
-
-#: ../../any.pm_.c:326
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "�����i�� ���i�"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "������ ����� �� �����������"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "�� ���i��� ���� ������� swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "����� ����� ��� ���������������"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "��������� %s %s i���������"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "�i ���� � ��� i���?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "�i ���� � ��� %s i��������?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "��"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "���"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "��. ��i����� ������������"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "����������� �������� ��� %s ����� %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(������ %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "��i ������� %s ������������?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"� ��������� �������� %s �������� �������� ��������� ���������� i���������,\n"
-"��� �������� ���� �� �����������. �i �� ������� �� ������ ��� ���\n"
-"���������� ����i, �i ������i�� �������� �������i������ ������\n"
-"� ������� ���������� i��������i? �������, ����i������� ��������\n"
-"�� �������� ����'�����, ��� ��� �i���� �� ������."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "���������"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "�������� ���������"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"�� �� ������ ������ ����i ������ %s.\n"
-"����i - � ������� ``i��=�������� i��2=��������2 ...''.\n"
-"���������, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "����i ������:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"�������� ������ %s �� �������.\n"
-"������� ������������ � i����i ����������i?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(��� ��������� %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "���� ������ ������� ������"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "���i �����, �����i�� i�� ����������i��"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"I�� ����������i�� ���i��� �������� �i���� �����i �� �i��i� ���i����, \n"
-"�i���, `-' i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "���� i�� ����������i�� ��� ���������"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "������ ����������i��"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"�����i�� i�� ����������i��\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "������� ����������i��"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "������� i��"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "I�� ����������i��:"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "��������:"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "�i��������"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "����������� ������ � �i�����"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"����� ������i�� �i����� ��� ������������ ������� � �i����� ���\n"
-"������ ����������i��. ���i �� �� ������� ������, ���i��i�� \"������\"."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "������� �������� ����������i��:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "������� �������� �����:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "���i �����, ������� ���� ��� ����������."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "�� ������ ������ ����� ����, ��i� ������ �������� ����� �����������"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "��"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "������ ����������i��"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "�� ������"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "��������"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "����� ������ ��� �����������"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "������"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "�������� ��������� � Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "���� �����"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "����������"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "�����i"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "�����i"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "������i������"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"���� �������� ��������� ������������� � ���������. �i����� ����� �������\n"
-"� ���������i, ��� i ����� ������: ���� �������� ������i ������ "
-"�������������\n"
-"�� �������, ��i� �������� �� ����i �i �� Internet. ������ �� ��������� "
-"�������."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"������ ����� ��������, ��� ������������ ����'����� � �����i ���������\n"
-"������� �� �������������."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"���� ���������� �������� ������i, ��i ������������� ��� ����'�����,\n"
-"��i �������� �� Internet � �����i ��i����. ������� ����� �������i\n"
-"������i."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"�� ����� ������ ������i ������� ������������ �i����� � �����i\n"
-"�������. �������� ������i ���������� �����i ��� ������\n"
-"�������, ��i �������� �������i �� �����i�i�i ��i�����i."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"��������� �����i����i 4 ������, ��� ����� �i����� ������� ��������.\n"
-"��������� ������i ���������� �� ����i���."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "�������� ������i"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "��������i ������ ������i"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "������� ���������� ��������i ��� �������"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "�� ����� �������� �������� � /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "������� ����"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "��������� ����"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "���� �� ������� ���������� ��������� ���������?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "��������� ������"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-#, fuzzy
-msgid "/_File"
-msgstr "�����:\n"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "���i���"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "����i�� ���i���"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "����� ��������"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "����������� �������"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "�������� I�������-��������"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-#, fuzzy
-msgid "Configure"
-msgstr "��������� X Window"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "��"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d ��i�i�"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 ��i�i��"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d �������"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "������ ������� ���������"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "�� ������ ������ ����� ����, ��i� ������ �������� ����� �����������"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "�������"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "�����i���i"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "������i"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "�������i"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "��������i"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "��."
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "I��������i"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "����������"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "��-������, ����i�� ���������� ���i� ����� ��������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "������� �����i��!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"���i �� �������� ������������� boot ��������, ���� �������i�� ��\n"
-" �� ����� �� 2048 ������� �� ������� �����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "�������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "������� ���������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "������� �������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"����� �� ����� �����i ���i� ���i�i ������� FAT\n"
-"(�� �������� ������������ MS Dos/Windows).\n"
-"��������, ��-������, ����i�� ������ ��������\n"
-"(��i��i�� �� ���, � ����� �� \"�������� ������\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "��������� �� �������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "������������i"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "������� ����i�������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "�����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "�����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "���� �������� �i�����:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "��������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "���"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "�������������� ``%s'' ������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "��i�����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "�������� ����i�� ``Unmount''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "��� �������� � �������� %s ������ �������� ����� ����� ��� ����"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "������� �������"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "��������� ������ ��������"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "����� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "�������� �����"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "�����"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "������� ����������?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "�����i ��� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "�����i ��� ���i�� ����i�� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "�i ������� �������i������ ��������i?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "������������ ����������"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "�����i�� ��"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "I���������"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "��� ��������� �������� �����������"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "������ ������� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"��� ����i�� ����� �������, �����i�� ���i� i �������� �������� ������� "
-"(extended)"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "���i� ����i�� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "���������� ����i�� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "���������� ����i�� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "���������� ����i�� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "��������i������� ������� ���������������"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "������� ����"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"����i�� ����������� ����������� ����� ��� i��� �����\n"
-"���������� �����?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "�����!"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"������ ������� � ��������\n"
-"��� �������� �� ����� ������� ������ ��������"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "���������� ���������� ����i�� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "I���������"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "������ ����i�������"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "����i"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "�������� ������"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "�������"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "������������"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "����i�������"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "������ �� RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "������ �� LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "�������i������"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "�����i�� � RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "�����i�� � LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "����i�� RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "������������� ��� �i��������� �������� �i�����"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "��������� ������ ��������"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "��������� ������:"
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "����� � ��:"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "��� �������� �i�����:"
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "����� ����i�������:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "���������: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "������������ �i���������� �������� %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "����i�� ��� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "���� �i����� ����� �� ������� �������������?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "���� �� ������� ����i������ �i��������� ������� %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "���� �� ������� ����i������ ������� %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"������ ���������� ����� ����i�������, ���� ��� ������ ��������������� ���\n"
-"�i��������� �������� �i�����.\n"
-"�������� �����i�� �i��������� �i�����"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "����� ���� �������� �i����� FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "�������� ������"
-
-#: ../../diskdrake/interactive.pm_.c:609
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "������ ����� �������� �� ������� ����i��?"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "��� �������� � ����� �������� ���i��� ���� ����i�������"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "��� �������� � �������� %s ������ ��������"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "����� ����� ������"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "����� � ��:"
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "�� ��i ���� ���������?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "������"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "�� ��i ������ ���������?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "��������"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "���������� �������..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "������� i������ RAID ��� �������"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "����"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "�������� i������ LVM ��� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "���� ������� �� ���� ���� ����������� ��� �i��������� �������� �i�����"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "�i��������� �������� �i����� (loopback)"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "I�� �i���������� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "������� i��"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"���� ��� ��������������� i���� �i��������� �i������. ���i �����, \n"
-"������� i���� �����"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "���� ��� i����. ����������� ���?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "����i ������:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "�������"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "��������"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "����� �����"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "������� �����i��. ����� �������� ������ �����i��"
-
-#: ../../diskdrake/interactive.pm_.c:906
-#, fuzzy
-msgid "What type of partitioning?"
-msgstr "��i ��� �������i �� �����?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"��������, ��� ������ �������� /boot �� ����� ����� (�� ���i���� > 1024).\n"
-"��� �� ������� ������������� LILO - ���� ���� �� ����� ���������, LILO �� "
-"��������������, ���� /boot �� ��������."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"������ ��� ������� � �����i ���������� (/) ������� �i�i��� �������i�� �����\n"
-"1024-�� ���i���� ��������� �����, � � ��� ���� �������� /boot .\n"
-"���i ����� �������������� �������� �������i LILO, �� ����������� ������\n"
-"������� /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"�� �����i RAID ������� �� ��������.\n"
-"���� ����������, ��i � ������i��� ��� /boot ��������.\n"
-"������� ������ /boot, ���i �����."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "����i�� ����������� ������� %s ����� ���i���� �� ����!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "��� �������i �����i�i � �������, ��������� ����������i���"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "��� �������� � �������� %s ������ �������� ����� ������������"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "������������"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "������������ �i���������� �������� %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "������������ �������� %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid �� ������������"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "�� ����� �������� ��� ��������� ����� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "�� ����� �������� ��� ��������� ����� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "������ ������: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "�������:"
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "�i���� ��� DOS-�����: %s (�����)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "���: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "I��: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "�������: ������ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "�����: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s �������"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "���i���� � %d �� %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "������������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "�� �������������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "������i������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "����(�) �i��������� �������� �i�����: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"���������� ������� �� ���������\n"
-"    (��� �������i MS-DOS, � �� ��� lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "�������� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "����� ��������� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-����i %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "I�� ����� �i��������� �������� �i�����: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "�����: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "���������: %s ���i����, %s �������, %s �������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "I���������: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-����i %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "��� ����i�� ��������: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "�� ���� %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "����i: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "��� �������� �i�����:"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"���� ������ ������� ������ (��� ������ ���i��� ���� �� ����� �� %d �i����)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "�����i �� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "����i�� ��� ��������"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "��������� �� �������"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS ������"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ������� ������������ %s"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "�� ����� �� ������������� %s � ����� %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "������� �������i������� %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr ""
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "������"
-
-#: ../../fsedit.pm_.c:467
-#, fuzzy
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "�� �� ������ ����i���� �� �������, ����� ��i� ����� �� 16 ��"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "�� �� ������ ����i���� �� �������, ����� ��i� ����� �� 32 ��"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "����� ����i������� ���i��� ��������� � /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "��� ���� ������� � ������� ����i������� %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "���� ������� ������ ���������� ������ ��������� �������� ������"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"��� ��������� ������ ����i���� ��� �������� �i����� (ext2, reiserfs)\n"
-"��� ����� �����i ����i�������\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"��� ��������� ������ ����i���� ��� �������� �i����� (ext2, reiserfs)\n"
-"��� ����� �����i ����i�������\n"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "�� ����� �������� ��� ��������� ����� ��������"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "������� �������� %s ��� ���i��: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"�������: ��� ��������� ����� �������� �i����� �� ��������� ���������� \n"
-"�������. �������� ������������ ��� ������ i�������� �������."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "�� �� �������i ��i��i� ��������!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"����� ��������� ��� �������� �������� Linux, ���������� �� ����� �����,\n"
-" ��� �������� �������� ��������� �����. �� ������ ������� �� ��� � "
-"������������\n"
-" �����, �� ��� ����� ����������� ��� ���������� ������������. ��� ��\n"
-" ������ �����, �� ������, �������� ���� ������� (\"/\"). �����\n"
-" ������� �� ����� �����, �� � ���������� ������� �� �� �������� ����������\n"
-" ���������� ����������� ������������.��� �� ������� �������� ����� "
-"��������\n"
-" �� ������� ��������, �� ������ ������ ����� ������������ \"/home\".\n"
-"\n"
-"����� ������� ��������� ��������� ����� \"���\", \"��������\".\n"
-"\n"
-"\n"
-"\"���\" �������� ��� - \"��� �����\", \"����� �����\", \"����� ��������\" \n"
-"(���������, \"hda1\").\n"
-"\n"
-"\n"
-"\"��� �����\" �������� �� \"hd\", ��� ���� IDE, � \"sd\" ��� SCSI.\n"
-"   * \"�\" \"master\" �� ��������� ������ IDE \n"
-"   * \"b\" \"slave\" �� ��������� ������ IDE\n"
-"   * \"c\" \"master\" �� ��������� ������ IDE\n"
-"   * \"d\" \"slave\" �� ��������� ������ IDE\n"
-"\n"
-"\n"
-"��� SCSI ����� - \"a\" ���� \"�������� ����� ����\", \"b\" - \"�������� "
-"����� ����\", � �.�."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"� ����� ������, �� ������ ������ ��� �� ����� ������ \n"
-"����� ���������� ����������� ������ Mandrake Linux. ��� ���� �����\n"
-"����� ����������� ����������� ����������� ������ ������������ ���\n"
-"�������� ��������, �� ������ ������� ��� �� ��������. � �������,\n"
-"������� �������� �������� ����� ���������� � �������� �������� ���\n"
-"�������� �������� ����� ����������� ����� ����� ������ Mandrake Linux.\n"
-"\n"
-"���� �� ����� ������� �������� �������� �����������, ���� ������ \n"
-"���� ���� �������� � ����������, ��� �� ��������� ������������. ����\n"
-"������� �������� ���� ������. ����� ��� �� ������ ����������, ���\n"
-"�����, �� ������.\n"
-"\n"
-"��� ��������, ���� ����, ��� ��������. ����� ���������� ��� �����������\n"
-"������, � ���� ��� ���������� ������ (Swap - �������).\n"
-"\n"
-"��� �������� ��� ��������� (� ���������� ����������� �� ����� \n"
-"������������ ���������� ��������), �� ������ ������ ���, ��� �������\n"
-"������������� ��� ����������� ������.\n"
-"\n"
-"\n"
-"��� �������� �� ��� ���������, �� ������ �� ��������. ��� ������ \n"
-"����, ����������� �������, ���������� �����. � ���������� �� \n"
-"������������ ��������� �����, ����� ���� �������� ���������:\n"
-"\n"
-"* ������������ ��������� ��������: ������� ������ ���� �� �������.\n"
-"�������� �������� �� ����� ������ �����. ��� �� ������� �� ��������,\n"
-"������� ����� �����.\n"
-"\n"
-"\n"
-"* ����� ������� �����: ������� ����, ��� �� ������� ������� ����������� � "
-"�������� ��� �������\n"
-" �� ����� ����� � �������� �� Mandrake Linux. ������ ������� � �����������, "
-"�� ���� ������ ����������.\n"
-"\n"
-"\n"
-"* ������������ ������� �������� �� �������� Windows: ��� MicrosoftWindows "
-"���������� �� ����� ������\n"
-" ����� � ������������ ��� ��������� ��������, �� ������ ��������������� "
-"�������� ��� �������� Linux\n"
-"��� ������ ����, �� ������ �������� ��� ������� Windows � ��������(��."
-"\"������� ����� �����\" �����\n"
-" \"����� ��������\") ����� ������� ������ ������ �������� Windows�������� "
-"������ ���� ���� ��������\n"
-" ��� ������ ��������. ����� ����� �������������, ��� �� "
-"�������������������� Mandrake Linux �\n"
-" Microsoft Windows �� ����� � ��� ��  ����'�����.\n"
-"\n"
-" ����� ������� ������, ��� �����, ��������� �����, �� ���, ������������� "
-"��������� �������\n"
-" �������� ��� Microsoft Windows ���������.\n"
-"\n"
-"\n"
-"* ����� ��������: �� ������ ������ ����� �����, ��� �� ������������� "
-"�������� ������ �����.\n"
-" ������ �������� ������� ����. ����� ����� �������� ��� ����������������, "
-"�� ������\n"
-" ���� ������ ���� ��������. ���� �� ������� ����� ����� ��� ���� ������� "
-"��� �����."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"��� ��������, ��� ��� ����� ��������� ������ ����\n"
-"������������� (����������� - ������� �������� �������� ������).\n"
-"\n"
-"\n"
-"� ��� �� ���, �� ������ ��������������� ��� �������� ��������, ��� ������\n"
-"�������� ��� ��� �����������. ��� �� ������� ������ ����, ������� "
-"��������\n"
-"��� ������� �������������.\n"
-"\n"
-"\n"
-"�������, �� ������ ��������������� ��� ��������� ��������. �� ������\n"
-"��������������� ��������, ��� ����������� ����������� ������ (���� \"/"
-"\",\n"
-"\"/usr\" �� \"/var\"), ��� �� ������ ��������������� ��������, ��� "
-"�����������\n"
-"��������, ��� �� ������� �������� (�������� /home).\n"
-"\n"
-"\n"
-"��� �����, ������ ��������, ������� ��������, �� ����� ������������\n"
-"��� �������� ������ ���������� ���������.\n"
-"\n"
-"\n"
-"��������� \"���\" ��� �� ������� ����������� ��������.\n"
-"\n"
-"\n"
-"��������� \"������\" ��� ������� ������ ����� �������� ��� "
-"����������������\n"
-"����� ����������� ������ Mandrake Linux."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"���� ����� ����������� ������ Mandrake Linux ����� ����븢������.\n"
-"���� �������� ����� ����� ���(��� �������� �� ������ �������� ����������� � "
-"��������\n"
-" ����'�����) .\n"
-"\n"
-"\n"
-"��� �����, ���������."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"�� ����� ����� ���� ��������� ����� �� ���� �������\n"
-"Windows. ��� �����, ������� ���, ����� ����� ������� �������, "
-"�������������\n"
-"������ Mandrake Linux.\n"
-"\n"
-"\n"
-"��� i��������, ����� ������� ��������� ��: \"Linux ���\", \"Windows\n"
-"���\" \"C�������\".\n"
-"\"Linux ���\" �������� ��� - \"��� �����\", \"����� �����\",\"����� "
-"��������\n"
-"(���������, \"hda1\").\n"
-"\n"
-"\n"
-"\"��� �����\" �������� �� \"hd\", ��� ���� IDE, � \"sd\" ��� SCSI.\n"
-"\n"
-"\"����� �����\" - ����� ����� \"hd\" �� \"sd\". ��� IDE �����:\n"
-"   * \"�\" \"master\" �� ��������� ������ IDE \n"
-"   * \"b\" \"slave\" �� ��������� ������ IDE\n"
-"   * \"c\" \"master\" �� ��������� ������ IDE\n"
-"   * \"d\" \"slave\" �� ��������� ������ IDE\n"
-"\n"
-"\n"
-"��� SCSI ����� - \"a\" ���� \"�������� ����� ����\", \"b\" - \"�������� "
-"����� ����\", � �.�.\n"
-"\n"
-"\"Windows ���\" ����� ������ ����� � Windows (����� ���� ��\n"
-"������� ����������� �� \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "��� �����, ���������. ����� �������� ����� ����� ���."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"��� �����, ��������� \"����븢��\" ��� �� ������ ������� �������������� "
-"Mandrake Linux\n"
-"����� �� ������� ������������� ������� ����������� ������.\n"
-"\n"
-"\n"
-"� ���������� �� ����� ���� GNU/Linux, �� ������ ������ ���� � ��������� "
-"�����, ��� ����븢���� � ������������ \n"
-"����� ����������� ������ Mandrake Linux:\n"
-"\n"
-"* �������������: ������� ���� ����, ��� �� ����� �� ����븢���GNU/Linux. "
-"����������� ����� ����� �������,\n"
-" ��� ����� ������ ����� ������� ��������.\n"
-"\n"
-"\n"
-"* �� ������: ��� �� ���������� ������ � GNU/Linux, �� ������ ������ ����� "
-"�� ������������� ������ �� ��������\n"
-" �������, ������, ����������. �� ������ ������� �������� �� ������� "
-"��������� �������� ��� ��� ��� �����������\n"
-" ����� \"�������������\", ���� �� ������ ������, �� ������ GNU/Linux, ��� "
-"������ ���� ���� �����������.\n"
-"\n"
-"\n"
-"* �������: �� ������ ������ ���� ����, ��� �� ����� ������ ���� � GNU/"
-"Linux. �� � ��� ����������� �����\n"
-" \"���������\", �� ������ ������ ����� �� ������������� ������ �� "
-"�������� �������, ������,\n"
-" ����������. ������� ����� ���������� ����� ���, �� ������ ���� ���� "
-"�����������. �� ������� �������� �������� ����������� �\n"
-" ������������ � ����� ��������. ������ �� ��������� ������� ������ ���� "
-"����� ���������, ��� �� �� ����� ������ ���� � GNU/Linux.\n"
-" ���� �� ������� ���� ���� ����������, ��� �� �� ������� ���, ��� �����."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (�� LInux LOader) i Grub - ���� ���������i. ��� ������ ������i�� "
-"������\n"
-"GNU/Linux �i ����� i���� ����������� �i�����, ����������� �� ���������.\n"
-"��������, ����� i���� ����������� �i����� �������� ����������� i\n"
-"����븢������. ���i ���� �� ����������, �� �� ������ ������ ���� ���i�\n"
-"����������. ������� ��������, ��� �� �����i ��������� ���������.\n"
-"\n"
-"\n"
-"������� �� ������ �������� i �� �������� i���� ����������� �i�����.\n"
-"� ���i� ������� �������� �����i�� ���������� ���i��. ��� � ���� ��� \n"
-"�������� ����� ����������� �������, ��� ������i���!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"��������� ���������, ��� �� ������� �������i�� i���������, ���� ���������\n"
-"��� �������i Linux.\n"
-"\n"
-"\n"
-"���i �� �� ��������� ��������� ��������, ��� �� ���i��, \n"
-"������� \"����� ������ �� ����� (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"������� ����� ���� �� ������� �������� ��� �����������\n"
-"������ �������� Mandrake Linux. ������ ��������, ��� �������� �� ����� "
-"������\n"
-" �������� � �� ��������� ����� �������."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"��������� \"���\", ��� ������� ������� ��� ��������\n"
-"� �������� �� ����� �����. ������ ��������, ����� ����� �������� �� ��\n"
-"\n"
-"�������� ������� ����� �������� � ��������, �������� � �������� Windows\n"
-"\n"
-"\n"
-"��������� \"������\" ��� �������� �������� ��� ������ �������� � ��������"
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "��������� ������������� broadcast ��� ������ NIS"
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "������ ������� � �������� %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "������� ������� ����� %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"������ ������������ �������� ����������� �������� ��� �����.\n"
-"�������� ���������� ��� �� ����� �������� ���: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"�� ���i��� ���� �������� �������.\n"
-"��� ������ �������� ������� (����� �������� ��� i������).\n"
-"����� ������� ``������ ����i�������'' i �������i�� �� � `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "�� ���i��� ���� ������� swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"���� �������� swap.\n"
-"\n"
-"�� ���� ����������?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "�� ���i��� ���� ������� swap"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "������������� ��������� ��������"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "�� ����� �������� ��� ��������� ����� ��������"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "������������� i������ �������"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "���� i������� ��������, ��i� ����� �����������"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "������������� ������� Windows ��� �i��������� �������� �i�����"
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "������ ����� �������� �� ������� ����i��?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "����� ������"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "�������� ������� � M�: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "����� swap �������� � M�:"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "������������� ��������� �������� �� �������� Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "������ ����� �������� �� ������� ����i��?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "���i����� ���� �������� �i����� Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"� �������� ����� ������ �������� FAT �� ����������\n"
-"���������� ��� �������, �������: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"��� ������� � Windows ������� �������������. \n"
-"����������� �������� ������i�� �������� ``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"�����!\n"
-"\n"
-"DrakX ����� ���i��� ����i�� ����� ������ �������� Windows.\n"
-"������� �����i��: ����� �������� ����������. ���i ��  ���� �� ����i�i \n"
-"���������� ���i� ��������, �� �������� ���i���� �������� �����������,"
-"��������� scandisk i defrag �� ����� �������, ����i�� ���������� ���i�\n"
-"�������� i �����i ����� ��� ����i���� �� �������� �����������.\n"
-"���i �����������i��, ���i��i�� Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "���� �������� �������� ��� Windows?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "������� %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "������������ ������ �� ���������� ��� �������� FAT %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"�� ��������� �������� FAT ��� �������� ������ ����� ������������\n"
-"� �����i �i��������� �������� �i����� (�i ������������ �������� �� �����)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "�����i �������� �� ��i� �����"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "�����i�� Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "�� ��i � �������� ������i� ����� �� ������� ���������� Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "��� i������� �������� �� ����� %s i �������� �� i� ������ ��������"
-
-#: ../../install_interactive.pm_.c:190
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "������������� i������ �������"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "������������� fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"�� ������ ����� ����i�� ��� ���� %s\n"
-"�� ���������i �� ����������� �������� �������i, ���������� `w'"
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "������������� ��������� �������� �� �������� Windows"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "������ ������� ���������"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "������� ���������i �������� DrakX ������ ��������� ��������:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "���������� ������� �� �������: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "��������� �� ����i"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "��������� �� ����i"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"���i��� �������, ���� �� ������������ �������� ����������,\n"
-"���� ����������� �� ���� ������."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "���������� ������ ����i������� %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"��������� ������ ������ �� ���i ���������� ��������.\n"
-"����i ��� cdrom ���� �i ��� cdrom ����� �������.\n"
-"�������� cdrom �� ����� ���������, ��������������\"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Сардэчна запрашаем у %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "�������� ����������"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "������� �� ���� `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"� ����� �i����� ������ ������� �������, ���� ������� ��������\n"
-"��� ����������i Mandrake Linux. � ����� ������� ����������� ���������\n"
-"�������� �����������. ��� ������ ���i��i�� `F1' � ��� �������i, � �����\n"
-"�������� `text' i ���i��i�� <ENTER>."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "���� �����������"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "���i �����, ������� ���i� � ����� �����������:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "������� ����� ��� ������� ����� �����i��� ���� %d ��.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"���i �� ������� ���������� ����� ������ ������,\n"
-"������� ������� ������, ��i �� ������� ����������.\n"
-"\n"
-"��� �i��i� ������� ������ ���������� �����i �������� ������ ������,\n"
-"� ��� 100% ������ ���������� ��� ������� ������."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"�� ����� ����� ���� ����� �����i ��� %d%% ����� ������.\n"
-"\n"
-"���i �� ������� ���������� ����� ������, ��\n"
-"�������� ������� ������ ��� �����������.\n"
-"��� ����� ������� ������ ���������� �������� ������ ������;\n"
-"��� ������� %d%% ����� ���������� ������i ������ �����i �������."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "����� �������� ����� ����� ����� ����i�� �� ��������� �����."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "������� ������ ��� �����������"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "����� ����� ������"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "����i��� ����� ������"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "������� �����: %d / %d M�"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "������ �����"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "I��: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "����i�: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "�����: %d K�\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "���������: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"�� �� ������ ������� ���� �����, ���� �� �� ����� ����� ��� ��� �����������"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "��������� ������ ������ ������ �� �i�����"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "��������� ������ ������ ��������"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "�� �� ������ �������� � �������� ��������� ������ ������"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "���� ���������� �����, ��� ��������� ������ �����i��"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "�� �� ������ �����i�� ��������� ������ ������. �� ��� ����������"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"���� ����� ���i��� ���� ��������\n"
-"�� ��������, ��� ������ �����i�� ���������?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "�� �� ������ �����i�� ��������� ������ ������. ��� �������� �����i��"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "����븢��"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "��������� �� �������"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "����i��� ����� ������"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "�����i�� � �i�����"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "����� ������ ��� �����������"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "����븢����"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "��������"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "��������� ���� "
-
-#: ../../install_steps_gtk.pm_.c:528
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "���������� ������������"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ������"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "����������� ������ %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "�������"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "��������"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"����i�� ��� Cd-Rom!\n"
-"\n"
-"���i �����, ������ Cd-Rom, ��������� \"%s\", � ��� �������� i ���i��i�� O� "
-"�����.\n"
-"���i �� �� ����� ���, ���i��i�� �����i��, ��� �����i�� ����������� � ������ "
-"Cd."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "�� ���� ����������?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "���������� ������� ������������� ������:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "���������� ������� ������������� ������:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "�������� �������"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "�i ������� �������i������ ��������i?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "˳�������� ������"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "����i�����"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "���i �����, ������� ��� ����i�����."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "��i ���� ����������� �� �������?"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Install/Update"
-msgstr "����븢��"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Is this an install or an update?"
-msgstr "������� ����������� �i ���������"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "�������������"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "�������"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "����i��� ����� ������"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "���i �����, �������� ��� ����� ����."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "���� ����"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "���i �����, �������� ��������� ����, �� ����� ���������� ����� ���."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "��������� ���� PCMCIA ..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "��������� IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "���� ��������� ��������"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "������� ������ ����i�������"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"����i�� �������� �� ��������, ��� ������� ���������� ��� ���� :(\n"
-"��������� i��i ����� i ���� ���������� ������� �������� (��� ���������\n"
-"������ ��������!). I���� ������� �� ������i�� DrakX ����i�� ����i�� "
-"��������.\n"
-"(������� � %s)\n"
-"\n"
-"�i ������� �����i�� ��� ��������?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake �� ���� ����i���� ��������� ����i�� �������.\n"
-"����������� �����i �� ���� ������!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "�������� ������� �� ���������"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "�������� �������"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "��i ������ �������� (/) ��� ����� �i�����?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "��� �����i����� ����i�� �������� ������i����, �������� ������������."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "����� �������� ��� ������������"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "��������� �� ��������� ������� �����?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "������������ ��������"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "��������� i ������������ ����� %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"�� ����� ����� � ������ �������i (swap) ��� �����������, �����i��� ���."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "������� ��������� ������"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "����� ������ ��� ���������"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"���� �i����� �� ��� ��������� ����� ��� ����������� �i ��������� (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "���� (%dM�)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "�i�i������ (%dM�)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "������������� (%d��)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "��������� � �������"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "��������� � �������"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "����� ����� ������"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "������ ������� � �������� %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "��������� �� �������"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "����� ������ ��� �����������"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "�������"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"���i �� ����� ��� CD ����i �� ��i�� �i���, ���i��i�� ��.\n"
-"���i �� �� ����� ��i ������� � ����� CD �����, ���i��i�� �����i��.\n"
-"���i ��������� � CD ����� �� �����, �����i�� i� ���������� i ���i��i�� ��."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ��������� \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "���������� ������������"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"����������� ������ %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "��������� ����� �����������"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "������ ������� � �������� %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "������ ������� � �������� %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"����� �� ����� ���������� ������i�� �������� ��� ����������.\n"
-"\n"
-"�����:\n"
-"\n"
-"�-�� �������� ������������ �� �������� ������� ���� i ������ ��������\n"
-"� ������ �������������, �������� i/����� ����������i� ����� ������� "
-"���i���\n"
-"�����i��� � ���, ��� ������ ���/i� �������� ���������� ���������, "
-"��������\n"
-"i/����� ������������� ����� ��������.\n"
-"\n"
-"������ ����, �������� i/����� ����������i� ���i��� ���� ��������, ��� �� "
-"���������\n"
-"������ ���� ���i��. ���i �������� i/����� ����������i� ������� �����\n"
-"������, ��i� ������ ���� ����������� ������� ���, ��/��� ���� ����������\n"
-"\n"
-"�i � ��i� ���� �i Mandrakesoft, �i �� �������� i ���������i �� ����������\n"
-"�� �����������, �������� ����� ���������� ����� (��� �������, ��� \n"
-"�� ������������ ��������� ���������, ��������� �i�����, ������� "
-"����������� \n"
-"�������� i i����i �������i, � ������� ��������i ��������i i �������i, ��i� \n"
-"�������� ������i�� �� ��������� ����), ��i� ��������� � ����������, \n"
-"���������, ����� ������ �������i � ����i �������, �� ��i� �������� �����\n"
-"����������i� �������i ������ ����� ����i����� ������ ����������.\n"
-"\n"
-"����� ���������� � ������ ����� �������� ������������ ������i, �� "
-"�����������\n"
-"�������, ��i� ���������� �������������� �������� ������������� � �����\n"
-"�������������� �����. ����� �������� ���������� ����������� �������� �����\n"
-"���������i�� ������������, ��������, ����� ���������� �� ����i�������.\n"
-"���i� �����, ������ ������i ������ ������i������ ��� �����i i����i "
-"��������i\n"
-"�������i.\n"
-"\n"
-"� �����i ��������i, ��i� ��������� ���������� ����������, �����������: \n"
-"Mandrakesoft\n"
-"43, rue d'Aboukir\n"
-"75002 Paris\n"
-"FRANCE"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "������ � ����� ��� ��������� ��i�� ��������� ������"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "����� ������ ��� ��������� ������"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "������ � ����� ��� ��������� ��i�� ��������� ������"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "��i ��� ������ ����?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "��� �i������ ����i��i� ���������� �� GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS ������:"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "�������� ������ CUPS"
-
-#: ../../install_steps_interactive.pm_.c:1015
-#, fuzzy
-msgid "No printer"
-msgstr "I�� �������i"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "�i ���� � ��� i���?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044
-#, fuzzy
-msgid "Mouse"
-msgstr "���� ����"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "�������"
-
-#: ../../install_steps_interactive.pm_.c:1049
-#, fuzzy
-msgid "ISDN card"
-msgstr "��������� ISDN �����"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-#, fuzzy
-msgid "Sound card"
-msgstr "����������"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "������������� NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "�������� �������"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "������ ��� root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "���� ������"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"���� ������ ������� ������ (��� ������ ���i��� ���� �� ����� �� %d �i����)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "��������i�����"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "��������i�����"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "������"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "��������i����� NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS Domain"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS ������:"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"� ��������� ������������ ����� �� ������� ��������� Linux ��������� ��\n"
-" ������������ ����������. ���� ���� ���� ������, ���i �� �� ������� \n"
-"����븢���� SILO, ���i i���� ����������� �i����� ������� SILO, �i SILO �� \n"
-"���� ��������� � ����� ����i������i. ���������� ���� ������� ���� ���� \n"
-"���������� ������� � ������������� �������� Mandrake Linux, ���� �����i \n"
-"��������� ����������� �i����� ����� ����.\n"
-"\n"
-"���i ������� �������� ���������� ���� �����, ������ ������� � �����\n"
-"�������� i ���i��i�� \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "����� ��������"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "����i ��������"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "�������i��"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"� ��������� ������������ ����� �� ������� ��������� Linux ������� �� i \n"
-"����������� �����������. ���� ���� ���� ������, ���i �� �� ������� \n"
-"����븢���� LILO (�i Grub), ���i i���� ����������� �i����� ������� LILO,\n"
-"�i LILO �� ���� ��������� � ����� ����i������i. ���������� ���� ������� "
-"����\n"
-"���� ����������� ������� � ��������� �������� Mandrake Linux, ���� �����i \n"
-"��������� ����������� �i����� ����� ����.\n"
-"\n"
-"������� �������� ���������� ���� �����?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "���������, ��� �������� ����������"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "������� ��������, � ��i� ����� ��������� ����������� �������"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "������ ������� � �������� %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "��������� ����������� �������"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "���������� ����������"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "�� ������� ������������� aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"������� ����������� �boot, \n"
-"���������� ����븢����, ���������� �� ���������� ��������� ������� �������?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "����������� ����������"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "������ ����������� ���������� �� ��������. ���i��� ��������� �������:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "������ ������� � �������� %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "��������� ������� ��� �����������"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"��������� ����i �� ���������.\n"
-"�� ������� ������� �����i �����?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"�i�����, ����������� ���������.\n"
-"�����i�� ���������� ���� i ���i��i�� enter ��� �����������i.\n"
-"\n"
-"\n"
-"�� i���������� ��� �������i ��������� ������� Mandrake Linux,\n"
-"����������� �� \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"I��������� �� ��������� ����� �i����� ���� � �����-�����������\n"
-"����� ������ ��������i�� ����������i�� � ��i������� Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "��������� ������� ��� �����������"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "�����������"
-
-#: ../../install_steps_interactive.pm_.c:1361
-#, fuzzy
-msgid "Replay"
-msgstr "����������i��"
-
-#: ../../install_steps_interactive.pm_.c:1364
-#, fuzzy
-msgid "Save packages selection"
-msgstr "����i��� ����� ������"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "����������� Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> ���i� ���������i  |  <Space> �����  | <F12> �������� ����� "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "������� �������"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "���i �����, ���������"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "I���������"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "���������� �����"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "�������� �����"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "������������ ���i� �������������� �� ����� i �������"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "������ �����, ����������� ����\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "��� �����? (�������� %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "��� �����? (�������� %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "����i: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "�� ������� ������������� aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "��� �����? (�������� %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "�����i (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "������i"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "I������i"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "�i���i"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "���������i"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "��������i"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "������i"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "����i"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "�����i"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK ����i�����"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US ����i�����"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "I�����i"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "�������i (�����)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "�������i (typewriter)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "�������i (���������)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "������������� (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "�����i���i"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "�������i (���������)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "��������i"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "����i����i (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "���������i (�������� ���������)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "���������i (����������� ���������)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "�����i (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "������i (���� ������i������� ����i�)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "����i"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (��������i)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "�������i"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "����i���i (\"������\" ���������)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "����i���i (\"���i�����\" ���������)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "�������i"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "��������i"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "�������i"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "I����"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "I���� (���������)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "I�����i"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "I�������i"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "I��������i"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "������i 106 ����i�"
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "UK ����i�����"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "���i��-����������i"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "�i����i AZERTY (�����)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "�i����i AZERTY (����)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "�i����i \"����� �����\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "�i����i \"���������\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "�������������"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "��������i"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "������i (����������� ���������)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "������i (qwertz ���������)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "�����������i"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "�������i (������)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "����i (�-�-�-�-�-�)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "����i (�-�-�-�-�-�)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "����i (�-�-�-�-�-�)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "��������i"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "�������i (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "�������i (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "������������� (������)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "����i��"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "������� ����i�����"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "������� ����i�����"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "������i (����������� \"F\" ������)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "������i (�������� \"Q\" ������)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "����i���i"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US ����i����� (�i���������)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "���������i \"����� �����\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "������������� (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "����i������� ����� %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - ���"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-#, fuzzy
-msgid "Generic PS2 Wheel Mouse"
-msgstr "��������� ��� � 2 �������"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-#, fuzzy
-msgid "1 button"
-msgstr "2 �����i"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "��������� ��� � 2 �������"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "�������"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "� �����"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "����������"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "��������� ��� � 3 �������"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (����������, ����� ��� C7)"
-
-#: ../../mouse.pm_.c:66
-#, fuzzy
-msgid "busmouse"
-msgstr "���� ����"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 �����i"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 �����i"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "����"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "���� ����"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "��� �����, ������ ������� ���� �����."
-
-#: ../../mouse.pm_.c:500
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "��� �����, ������ ������� ���� �����."
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "����� ����� ����!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-#, fuzzy
-msgid "Finish"
-msgstr "�i���i"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "����� ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "���� ��������?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "��������� �� I��������"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "������������� pppoe"
-
-#: ../../network/adsl.pm_.c:22
-#, fuzzy
-msgid "use pptp"
-msgstr "������������� pppoe"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"��i dhcp ��i��� �� �������� �������������?\n"
-"�� ��������, ���� dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-#, fuzzy
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"�i ����� ethernet ������� ������� � ����� �i����� �� ���������. ���i �����, "
-"����������� ����i��������� i���������."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "�������� ������� i��������"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"���i �����, �������� ������� �������, ��i �������� ������������� ��� "
-"��������� �� i�������"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "�������� ����� �� ���������"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "��������� ����i"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"�����i�� i�� ���� ������ (host).\n"
-"I�� ����� ������ ���i��� ���� ��������� �������,\n"
-"��������� ``mybox.mylab.myco.com''.\n"
-"�� ������ ������� �����i IP ����� �����, ���i �� � ��� ����."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "I�� ������"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "����i������� ����i"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "��������� ISDN �����"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "��������� ISDN �����"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "��i ��� ������ ISDN ��������?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "��������� ������ �������� ������ (firewall)!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "��������� ������ �������� ������ (firewall)!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "��������� ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"������� ������ ����������.\n"
-"���i ��� ���� � ����� ��i��, ������� ��� ``I���''"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "���� (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "�����������"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"����������� \n"
-" �� ���� D-����� (��������� ������)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "��i �������� �� ������� �������������?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "��i ��� ����� �� �����?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "�� ������"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"���i �� ����� ISA �����, ���i���i �� ��������� ������ ���i��� ���� "
-"���������i.\n"
-"\n"
-"���i �� ����� PCMCIA �����, �� ���i��� ������ irq i io ����� �����.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "�����i��"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "����������"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "���� � ��� ISDN �����?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"��������� ISDN PCI �����, ��� �������� �� ���. ���i �����, �������� PCI "
-"����� �� ��������� ������."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "����� ISDN PCI �� ���������. ���i �����, �������� �� ��������� ������."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "�� ����� ����������� ����� �������� �����?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "��������� ������������ �������� (Dialup)"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "I�� ��������"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "����� ��������"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "I�� (login ID)"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "�� ������ �������"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "�� ������ ����i����"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "I�� ������"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "����� ������ DNS"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "����i ������ DNS:"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"�� ������ ���������� �� ����������������� ����� ��������."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"�� ������ ���������� �� ����������������� ����� ��������."
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "�� �� �������� ��������� �� I��������?"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"�� ������ ���������� �� ����������������� ����� ��������."
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "�� �� �������� ��������� �� I��������?"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "I�� ��������"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "��������� ISDN"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "��������� ����i"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "I������� �������� i ����i�������"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"�� ������ ���������� �� ����������������� ����� ��������."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"�� ������ ���������� �� ����������������� ����� ��������."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "����i������� ����i"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "������� �������� ����������i��:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "���������� �������..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "���������� ������ ����i������� %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, fuzzy
-msgid "ISDN connection"
-msgstr "��������� ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "�������������"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy, c-format
-msgid "detected on interface %s"
-msgstr "������� i��������"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "Cable connection"
-msgstr "�������� ��������"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "�������� ��������"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, fuzzy
-msgid "LAN connection"
-msgstr "�������������"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "������� i���������, ��i ������� ����������"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "�������� I�������-��������"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "�� �������, ��� ����� �������� ���������� ��� ��������?"
-
-#: ../../network/netconnect.pm_.c:247
-#, fuzzy
-msgid "Network configuration"
-msgstr "����i������� ����i"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "�i ������� �������i������ ��������i?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"���i �����, �����i�� IP ����i������� ��� ����� ������.\n"
-"����� ����� ���i��� ���� �������� �� IP ����� � ����������-��������� \n"
-"������i (���������, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "��������� �������� ������� %s"
-
-#: ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "������ XFree86: %s\n"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP �����"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "����� ����i"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "����������� IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ����� ���i��� ���� � ������� 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"�����i�� i�� ���� ������ (host).\n"
-"I�� ����� ������ ���i��� ���� ��������� �������,\n"
-"��������� ``mybox.mylab.myco.com''.\n"
-"�� ������ ������� �����i IP ����� �����, ���i �� � ��� ����."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS ������"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "�������-����"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "��������� proxy �������� �������"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy ���i��� ���� http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy ���i��� ���� ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "��������� �������� � I���������"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "�i ������� ����� ������������ ��������� �� I��������?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "��i ��� ������ ISDN ��������?"
-
-#: ../../network/tools.pm_.c:50
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "�� �� �������� ��������� �� I��������?"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"\n"
-"�� ������ ���������� �� ����������������� ����� ��������."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "��������� ��������� �� I��������"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "���i �����, �����i�� �i �������� ���� �i���"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ �����"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "������ ������ ����� (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO �����"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 �����"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 �����"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "��� ����i��� ��������� �����"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "I�� ����������, ��������� ���������.net"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "����� �������� ����������"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 ����������"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 ����������"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "����� ����i�����"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "����� ��������"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "I�� ��������"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "I�� ��������"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "I�� ��� ������� (i�� ����������i��)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "������ ��� �������"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "������� ����i�������: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "�������� ������� �� ��������i������ ����� ����������"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"�� ����� ��i��� � ����i�� �������, ��� � �� ��� ���������i �� ����������.\n"
-"���i�� ����� � ���, ��� ��������i�� ��������� �������� ���, ��� ��i��� i���\n"
-"������ �� ��������� (extended) ���������"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "��������� � ����� %s �� ����������: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "������ ���� ���������� ���ii"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "������� ���i�� � ���� %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "���i��� ����"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "�����"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "�����i �����"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "�����"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "���� ����"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "�������� �������"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "�������� �������"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "�������� ������ CUPS"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "�������� ������ lpd"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "������� ������� (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "������ �����"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "URI ��������"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "�������� �������"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "�������� �������"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "������� ���i�� � ���� %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(������ %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP ������� SMB"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (�� ���������)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "����� ���� �������� ��������"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "�� ������� ��������?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"�������� CUPS ������ �� �������� �� ��� �������� ��������\n"
-"�� ����� ������, �� ����� ��������� ����������.\n"
-"��� �� �� ��������, ������� \"�������� ������ CUPS\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "���������"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "�������� ������ CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ����� ���i��� ���� � ������� 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "IP ������� SMB"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "����"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "��������� ������"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "���������� �������..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "�������� �����"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "I�� �������i"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "�������� �������"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "�������� �������"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "�������� �������"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "�������� �������"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "���������� ������ ����i������� %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "URI ��������"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "�������� �������"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "�� ����� ����������� ����� �������� �����?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "URI ��������"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "���������"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "����������� ������ %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "����������� ������ %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "����� ���� �������� �������� CUPS"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "����� ���� �������� �������� CUPS"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "����i ���������� �������� lpd"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"��� ��������i ��������� ����i ����� ��� ��������\n"
-"��������� i�� ���������� ������� i i�� ����i �����,\n"
-"� ���� �������� ������ ����� ��������� ������i."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "�������� �����"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "�������� �������"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "�������� �����"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "�������� �����"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "����i �������� SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"��� ����� �� �������� SMB ��������� ��������� i�� ����� SMB (�� ����� "
-"������� � i����� � ����� TCP/IP) i ����� IP ������� �����, � ������� i�� "
-"�������, ��i ��������� � �������� ���������, i�� ����������i��, ������ i "
-"i��������� �� �������� �����."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "I�� ������� SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP ������� SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "I�� ��� �������������� �������"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "�������� �����"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "����i �������� NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"��� ����� �� �������� NetWare ��������� ��������� i�� ������� ����� NetWare "
-"(�� ����� ������� � i����� � ����� TCP/IP) i i�� ����i �����, ���� "
-"��������� �������� ��������, � ������� i�� ����������i�� i ������."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "������ �����"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "I�� ����i �����"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "����i ������ ��������"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"��� ��������� ���� ����� �������i, ��� ��������� �����������\n"
-"i�� �������� i ������� ��� ����� �����."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "I�� ��������"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "I�� ��������"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI ��������"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "I�� �������i"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "��i�����"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "�������������"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "����� ���� �������� �������� CUPS"
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "�������� �������"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "���� ��������?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "�������� �������"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "�������� ��������"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "��i ��� �������i �� �����?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "��������� �������� � I���������"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "��������� �������� � I���������"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "������� �������i������ ����?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "�������� �����"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "���,  ����������� ������� �������i ������"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "�������"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "����������"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "���� �������� ��������"
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "���� �������� ��������"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "���� �������� ��������"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "���� �������� ��������"
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"�������� �������i ��������� ������ �����.\n"
-"����� ���, �� ������� ��������, ���� ������i ����� ���.\n"
-"������ �����:\n"
-"%s\n"
-"\n"
-"�� ������ ���������?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"�������� �������i ��������� ������ �����.\n"
-"����� ���, �� ������� ��������, ���� ������i ����� ���.\n"
-"�� ������ ���������?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "I�� �������i"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "���� ����"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "��������� �� ����i"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "��������� �� ����i"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "����i ��������"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "����� ���� �������� �������� CUPS"
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "��������� �������� � I���������"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "I�� �������i"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "����� ���� �������� �������� CUPS"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "��������� ��������"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "��i ��� ������ ISDN ��������?"
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "��������� ����i"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "���i��� ������ �� ���������"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "��������� ����i"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "���� �i����� ����� �� ������� �������������?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "�����i"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "������i������"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "���� �i����� ����� �� ������� �������������?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "����� ���� �������� ��������"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "���� �i����� ����� �� ������� �������������?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "��������� ��������"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "����������� ������ %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "����i ��������"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "����� ���� �������� �������� CUPS"
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "��������� ��������"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "������� ������i�� �������?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "�������"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"��� ���������� ����i �����.\n"
-"�� ������ ������ ����, ����� ����i�� i�������."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"��� ���������� ����i �����.\n"
-"�� ������ ������ ����, ����� ����i�� i�������."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "��������� ����i"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "��������"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "�i ������� �������i������ ��������i?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "��������� �������� � I���������"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "�i ������� �������i������ ��������i?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "�������� I�������-��������"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "�������� ��������"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "���� �������� ��������"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "�i ������� �������i������ ��������i?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "�������� �������"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "����� ���� �������� �������� CUPS"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "�������� �������"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "�i ������� �������i������ ��������i?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "����� ���� �������� �������� CUPS"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "��������� proxy �������� �������"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "����"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Proxy ���i��� ���� http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Proxy ���i��� ���� ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "����������� ������ � �i�����"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "������"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "���� ������"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "�����i �� ���������"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "�� ������i������ ������ ������� �� _��������i������_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "�� ������i������ ���i� � ���� %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid �� ������������"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid �� ������������ (���� raid ������� ������i�����?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "������������ �������� ��� RAID ������ %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, ���������� �������� ����������i�."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"ampd ��������������� ��� ����������� ������� ������i i �������� "
-"���������i.\n"
-"��� ����� ������������� ��� ���������� ������ ��� �i��i� ������� ������i."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"�������, ��i� �����������, �i������� �� �������� i ���� �� ���������\n"
-"i ����������� ����� ������, ���i �������� �����i �i��� �����������."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron - ����������� UNIX ��������, ���� �������� �������� ����������i��\n"
-"���� ���������� ������� ����. Vixie cron ����� ��� ���������� �� "
-"������������\n"
-"UNIX cron, ��������� ����� �������� ������i i ������ ����i���������� ����i."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ����� ��������� ���� �� ��������, ��i� �������� � ��������� ������,\n"
-"���i� �� Midnight Commander. ���� �������� ������������� ��� ��� "
-"���i������i i ������,\n"
-"i ������� ��������� ����������� (pop-up) ���� � ��������� ������."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache - ���� World Wide Web ������. �� ��������������� ��� ������������\n"
-"HTML ����� i CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"I������� �����������-����� (������� inetd) �������� ��� ������ \n"
-"��������� ������ i������� ������, ��i� ���������. ��� ����� ������������� "
-"��� �����\n"
-"������� ������, ��������� telnet, ftp, rsh i rlogin. �������� inetd, "
-"�������\n"
-"��� ������, �� ��i� �� ��������."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"���� ����� �������� ������� ��������� ����i����� �� ����� �\n"
-"/etc/sysconfig/keyboard. ��� ���� ���� ������ ������� � ��������� "
-"kbdconfig.\n"
-"�� ������ ����i�� ��������� �� ��� ������� ������."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd - ���� ����� �����, �������� ��� ��������� ����� lpr. ����\n"
-"������, ��i �i��� ������ ��������(�)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) - ���� ������ �������� i���, ��i ��������������� ���\n"
-"������������ i�� ����� � IP ������."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"����i������ i �������i������ ��� �������� �������� �i����� (NFS),\n"
-" SMB (Lan Manager/Windows) i NCP (Netware) ������ ����i�������."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"�����i������/�������i������ ��� �������� i���������, �����i��������� ���\n"
-"������ ��� �������� �i�����."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS - ���� ������ �������� ��� ������� �� ����� ���� TCP/IP ����i.\n"
-"����� ������ �������������� NFS ��������, ��i ����i��������� ����\n"
-"/etc/exports ����."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS -  ���� ������ �������� ��� ������� �� ����� ���� TCP/IP\n"
-"����i. ����� ������ ������� �� ��������� �����i ���i� NFS ������i."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"��������� PCMCIA - ���� �������� ��������� ���i� ����, �� Ethernet i\n"
-"������ � ��������. ��� ���� �����������i ����i�������� i�, ���i �� �����\n"
-"������ i� ����, �i ��� �� ������."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper (���������i� �����) �i��� RPC ���������i, ��i� ��������\n"
-"��������������� ���i�i ����������i �� NFS i NIS. Portmap ������ ���i��� "
-"����������\n"
-"�� ������� ��i� �������� �� ������� ��� ���������, ��i� ������������� RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix -  ���� ������� ����������� �����, ��������, ����\n"
-"���������� ����� � ����� ������ �� �����."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"�������� i �����i�� �i������ ������i��� ��� ��� ������� �����i\n"
-"��������� ���������� ���."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"����� ������������i �������� �����i���� ����i��� IP ������������i\n"
-"��������� ���� RIP ��������. RIP ��������������� � ����� ������, �����\n"
-"��������� ��������� ������������i - � ���i�i� ������."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"�������� rstat �������� ����������i��� ����i ������i����\n"
-"������ �������i ��� ������ ������ ����i."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"�������� rusers �������� ����������i��� ����i ���������, ���\n"
-"������ i ������ �� ������� � �����."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"�������� rwho ��� ���������� ����������i��� �������� ��i� ��i�\n"
-"����������i��, ��������� �� ������, ������ rwho ����� (������� �� finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog - ���� ������, � ��������� ����� ����i� ������ ���i������ "
-"�����������i\n"
-"� ������ ����� ���������i. ���� �����i ����� ��� ������ ����� ������ ������."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "�������� i �������� X Font Server ��� �������� i ���������i."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "�������, ��i� ����i�� ��������� ���������� ��� ��������"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "�������"
-
-#: ../../services.pm_.c:123
-#, fuzzy
-msgid "Internet"
-msgstr "�i����"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Mouse Systems"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "����i ���������� �������� lpd"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "������ �����"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "�������"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "�����!"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "��������"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "��������� ����"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "������"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "�����������"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "��������� �������� � I���������"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "����������� - �������"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-#, fuzzy
-msgid "Development"
-msgstr "������������"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "��������� �� I��������"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "������� i��������"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "I�� ������� SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "������"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "�������"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "����������"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "����������� ������ %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"����i�� �������� �� ��������, ��� ������� ��������� ��� ���� :(\n"
-"��������� i��i ����� i ���� ���������� ������� ��������"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "�������"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "��������� ����� �����������"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "��������� ������"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "������ �i�������i!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "����븢��"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "������ ����������i��"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "������������ �i���������� �������� %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "������ ���� ���������� ���ii"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "������ ���� ���������� ���ii"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "������ ���� ���������� ���ii"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "����� ����� ������"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "����� ������ ��� �����������"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "�����i�� ����� �����"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "�����i�� Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "I�� ����������i��:"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "��� �����, ������ ������� ���� �����."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "����������� ���� ���"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "����������� ���� ���"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "���� ������"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "�������������"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "����� ���� �������� ��������"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "���i �����, ������� ��� ����i�����."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "��������� �� �������"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "����� ������ ��� �����������"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "������ ���� ���������� ���ii"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "��� �����, ������ ������� ���� �����."
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "������ ���� ���������� ���ii"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "�����:"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "I�� ����������i��:"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "����� ������ ��� �����������"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "���i �����, ������� ���� ��� ����������."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "������������� �����i����� ��������� �����?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "������������� �����i����� ��������� �����?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "�������"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "� �����"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "� �����"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "����i ������:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "����i������� ����i"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "����� ������ ��� �����������"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-#, fuzzy
-msgid "across Network"
-msgstr "�����:"
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "����� ������ ��� �����������"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "�����. �������� �i�����"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "����i"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "�� ����� ����������� ����� �������� �����?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "����i������� ����i"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "������ ���� ���������� ���ii"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "���i �����, �������� ��� ����� ����."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "������ ���� ���������� ���ii"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "��������� � �������"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "���i �����, �������� ��� ����� ����."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "�����"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "����������� �i�����"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "��������� � �����"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "��������� � �����"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "�� ������"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "��������� ����"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "������ ���� ���������� ���ii"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "��������� � �����"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "�����"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "����� ������"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "���i �����, ������� ���� ��� ����������."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "���i �����, ������� ���� ��� ����������."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "���i �����, ������� ���� ��� ����������."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "������ ���� ���������� ���ii"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "������ ���� ���������� ���ii"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "������ ���� ���������� ���ii"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "��������� � ����"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "��� �����, ������ ������� ���� �����."
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "����� ������ ��� �����������"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "����i������� ����i"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "����i������� ����i"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "���������"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "���������� ��������i"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "�����. �������� �i�����"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "����������� %s �� ����������. ���i��� ��������� �������:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "�� ������i %s"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "��������"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "����������� �������"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "���������� ������������"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "�����������"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "�����������"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "������������ ��������"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "��������� �������� RPM-������ � �i�����"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "���������� ��������i"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "������ ����i�������"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "����� �������� ��� ������������"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "�����"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "�����i��"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "�������"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "����������� �i�����"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "������� ����"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "�������� �������"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "� ����� ������ ���� �i������� ��������� ��������!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "����븢��"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "� ����� ������ ���� �i������� ��������� ��������!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "���������� �����������"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "�������� I�������-��������"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "�������� I�������-�������� ����� �������"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-#, fuzzy
-msgid "disable"
-msgstr "����i��"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "reconfigure"
-msgstr "��������� X Window"
-
-#: ../../standalone/drakgw_.c:146
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "���������� �������..."
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "�������� I�������-�������� ����� ����������"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "�������� I�������-�������� ����� ����������"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "enable"
-msgstr "����i��"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "�������� I�������-�������� ����� �������"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"��� ����'���� ���� ���� �������������� �� �������� ������������\n"
-" ��������� (Internet Connection Sharing)?\n"
-"\n"
-"������: ��� �������� ������� ������� ��� ����������� �� ���.\n"
-"\n"
-"�� ������� ���������� ������� ������ �� Internet?"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "������� i��������"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "� ����� ������ ���� �i������� ��������� ��������!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"�i ����� ethernet ������� ������� � ����� �i����� �� ���������. ���i �����, "
-"����������� ����i��������� i���������."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "������� i��������"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"���i �����, ������� ������� �������, �� ����� ����������� ��� ��������� �� "
-"����� ��������� ����i."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "���i��� ������ �� ���������"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "��������� ������"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "��������� �������� � I���������"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP ������� SMB"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "���������� ����� ��� �����i���� � ������� ����i�������� %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "��������� ������ �������� ������ (firewall)!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"�����! ��������� �������� �i����� �������� ������i (firewall). ��� ������� "
-"���������� ������������ �� ����� �����������."
-
-#: ../../standalone/drakgw_.c:340
-#, fuzzy
-msgid "Configuring..."
-msgstr "��������� IDE"
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "������������ �������, ����������� ��, ������ ������..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "�������� � ������������ ������ %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"��� ���������������.\n"
-"����� �� ������ ������� ������������� ����������� �� Internet\n"
-"� ����� ����'������ �  ����� ���, ������������ �����������\n"
-"��������������� (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "�������� I�������-�������� ����� �������"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "I������� �������� i ����i�������"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "�������� I�������-��������"
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "����i������� ����i"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-#, fuzzy
-msgid "Profile: "
-msgstr "������� ����i�������: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-#, fuzzy
-msgid "Hostname: "
-msgstr "I�� ������"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr ""
-
-#: ../../standalone/draknet_.c:181
-#, fuzzy
-msgid "Type:"
-msgstr "���: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "����:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "��������� ������"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-#, fuzzy
-msgid "LAN configuration"
-msgstr "��������� ADSL"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Driver"
-msgstr "������"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Interface"
-msgstr "������� i��������"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "��������� ����"
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "��������� ��������� ����i"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "������� ���������..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "�������� ��������� ��������i"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "I�� ��������"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Not connected"
-msgstr "�������������"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "���������"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "�������"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "�������"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "I������� �������� i ����i�������"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "I������� �������� i ����i�������"
-
-#: ../../standalone/draknet_.c:597
-#, fuzzy
-msgid "Connection type: "
-msgstr "I�� ��������"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "����"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "��������i ������ ������i"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "��������� �� I��������"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "������� i���������, ��i ������� ����������"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "�������i (������)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "����"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "I�������i"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "����"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "����������"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "���i �����, ������� ��� ����i�����."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "�� ������� ��� BackSpace ������� � ������ �� Delete?"
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "����i�� ������ ������"
-
-#: ../../standalone/livedrake_.c:25
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"����i�� ��� Cd-Rom!\n"
-"\n"
-"���i �����, ������ Cd-Rom, ��������� \"%s\", � ��� �������� i ���i��i�� O� "
-"�����.\n"
-"���i �� �� ����� ���, ���i��i�� �����i��, ��� �����i�� ����������� � ������ "
-"Cd."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "��������� ��������� live upgrade !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "I�� ����������i��:"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "�������� �����"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "��������� ADSL"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "����"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "�������"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "������������"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "���������"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "���i �����, �������� ��� ����� ����."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_usb �� ��������\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "��������� ������ ������?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "������� �i��������"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "����������� �������"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "��������� ������ �������� ������ (firewall)!"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "��������� ������ �������� ������ (firewall)!"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "����� ����"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "���� �����������"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "���������� ��������� �����"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "��������� ����"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "����� ����i�����"
-
-#: ../../steps.pm_.c:19
-#, fuzzy
-msgid "Security"
-msgstr "��������"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "�����. �������� �i�����"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "������������ ��������"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "����� ������"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "����������� �i�����"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "������ ����������i��"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "��������� ����i"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "��������� ������"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "����������� ����������"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "�������� ����. ����"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "��������� X Window"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "����������� �i�����"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "���������� �����������"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "������� �������� %s ��� ���i��: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "����i������� ����i"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "���������� ������������"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "������� ������� (socket)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office"
-msgstr "�����"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "��������� �����������"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "���������������� ����� ��� Palm Pilot � Visor"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "��������� �����������"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"������� ��������: ��������� ����� (kword, abiword), ���������� ������, "
-"����������� pdf-�����, � �.�."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "����������: �������������� mp3 � midi, ������ � �.�."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "��� � Howto �� Linux � Free Software"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "��������� �����������"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "����������� - ����"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "����� ����������� ��� �����, �����, web'�, �������� �����, � chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "�i ������� �������i������ ��������i?"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "����������� - ���"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "������"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Documentation"
-msgstr "��������i�����"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "���������� ���������������� �����"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "��������� �������� � I���������"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "����������� - ���"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "���������"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "���� ��������� ��������� �������� �����(Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment - ������� ��������� �������� � ��������� "
-"���������������� ������"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "���������������� ����� ���������� CD"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "��������� �����������"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "������"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "��������� �������� ���� The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "�������� � �������� ��� ��������� �� � � �++"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "������� ������� (socket)"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "����������� - ���"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "��������� � �������������� ����"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "����������� - �������"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "����������� ��������: ������, ������㳳 � �.�."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"����������� ��� ������� � ������ ����� � ����� (pine, mutt,  tin...), "
-"Web �����������"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "����������, ���������, ����������"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "������������ �������"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"��������� �������� �� ������� ����� ������������ ������� ������������ �  "
-"���������������� ������"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "��������� �������� � I���������"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "��������� � �������������� ���� � ����"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "����� ��������� �������� �����"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "���������, �������, ��������"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "�������� �������� ����� ��������, ���� gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "�������� �������� ����������"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "����������� - ��������� CD"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "��������� �����������"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "�����i��"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "����"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "������� �������� ����������i��:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "�������� �������"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "�� �� ������ ������ ����i ������ %s."
-
-#~ msgid "mount failed"
-#~ msgstr "������� ����i�������"
-
-#~ msgid "Low"
-#~ msgstr "�����"
-
-#~ msgid "Medium"
-#~ msgstr "������i"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "���� �������� ������i ��� ����� �����������, � ������ �����\n"
-#~ "�����i������ ��������� �������� i �������������."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "�����������"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "�������"
-
-#, fuzzy
-#~ msgid "Connect to Internet"
-#~ msgstr "��������� �� I��������"
-
-#, fuzzy
-#~ msgid "Disconnect from Internet"
-#~ msgstr "��������� �� I��������"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "�� ��i ���� ���������?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "����� ������ ��� �����������"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "I���������"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "��������� �����������"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server.  It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "Apache - ���� World Wide Web ������. �� ��������������� ��� "
-#~ "������������\n"
-#~ "HTML ����� i CGI."
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) - ���� ������ �������� i���, ��i ��������������� ���\n"
-#~ "������������ i�� ����� � IP ������."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "���i �����, �������� ��� ����� ����."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "�����"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "��������i������� ������� ���������������"
-
-#~ msgid "Active"
-#~ msgstr "�������"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "��"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "������� �����i \"%s\" ��������� �� "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "�������� �������"
-
-#~ msgid "Printer Device"
-#~ msgstr "���� ��������"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "�������� ������ CUPS"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "�������� ������ CUPS"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Mouse Systems"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "�����"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "���i �����, ������� ��� ����i�����."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "��������� �� �������"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "���: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "������ ���� ���������� ���ii"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "��������� X Window"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "���� ��������"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "������"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "��"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "���� ����"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "Root"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "��i ��� ������ ISDN ��������?"
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "��i ��� ������ ISDN ��������?"
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "�� �� �������� ��������� �� I��������?"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "������� �������� ����� �����������"
-
-#~ msgid "Total size: "
-#~ msgstr "������� �����: "
-
-#~ msgid "Please wait, "
-#~ msgstr "���������, ���i �����, "
-
-#~ msgid "Total time "
-#~ msgstr "������� ��� "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "����������� i������� ��������� ��� X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "�� ����� ����� �������� ��� ������� \n"
-#~ "(/dev/lp0 ���i�������� LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#, fuzzy
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "�����, ������� ������� �����i��������.\n"
-#~ "�i ������� ��������i�������� ���?"
-
-#~ msgid "New"
-#~ msgstr "����"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "��i�����"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "��������� �� �������"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "�������������� (%s), ������� ���������\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (�������� %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "��� �����? (�������� %s. �����i�� `none' ��� ���������i) "
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "�i ������� �������i������ ��������i?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "�� �������?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "���i �� �� ������� ��������, ��� ��������� ������� �'�������� \"/dev/hda"
-#~ "\"\n"
-#~ "(�������� ������� IDE ����) �i \"/dev/sda\" (����� SCSI ����)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "I�� ��������"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "������� �������� ����������i��:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "��� �����, ������ ������� ���� �����."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "�� ������ ������� ����� ����糳, ��� ���������� ������������.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� �����, ��������� \"�������\", ��� �� ������� � ������ ����糳.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� �����, ��������� \"����������\", ��� �� �� ������� � ������ "
-#~ "����糳.����������� ����� ��������\n"
-#~ "��� ����� ����� ������� ������������."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "������� ��������� ���� ����i����� � ������������ ��i��"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "��� �� ������� ��� ����� ����������� ��� �������� ����� ����\n"
-#~ "(������ ���, ���� �� ��� ����� ��������� �����������), ��� "
-#~ "������������\n"
-#~ "�� � ����� ������������ ����. ��� �� ������� ������ �� ��������� \"���"
-#~ "\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "�������: \n"
-#~ "\n"
-#~ "  - �� ������: ���� ����� ������������� � ��� �������, ���i �� "
-#~ "��������i \n"
-#~ "    ����� � GNU/Linux, i ������� ���i ������� ����������\n"
-#~ "    ������ i ������������ ��� ������ ����'�����. �����i�� �i��� "
-#~ "�������������.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - �������: ����� ������ ������ ��������, ��� �� �������� ��������� GNU/"
-#~ "Linux\n"
-#~ "    i ������� ������������� �����i �������� �����������. �� i � "
-#~ "������� \n"
-#~ "    \"�� ������\"��� �������� ����� ������� ���������� �������� i \n"
-#~ "    ������������ ������ ���������.\n"
-#~ "    ���i �����, �� ���I����� ���� �����, ���I �� ��ݡ����, ��� ���I�� "
-#~ "����I����!"
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "����� �� ������ ������� ����������� ��� ������, ��� �������\n"
-#~ "����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "�� ������ ����������� � �������� ����� ������, ���������� �������\n"
-#~ "� ����� ���� ����� ������.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� �� ������� ������ ������ � ��������� �������, ��������� �����\n"
-#~ "\"�����������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "��� �� �� ������� ���������� ������������ ������� �����������, \n"
-#~ "��������� \"���������� ����������\". ��� �� ������ ����, �������, "
-#~ "���\n"
-#~ "��� �� ����� ������ ������ ����� �� ������������ ������� ������,\n"
-#~ "��� �� ��� ��������."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "���i �� ����� ��� CD ����i �� ��i�� �i���, ���i��i�� ��.\n"
-#~ "���i �� �� ����� ��i ������� � ����� CD �����, ���i��i�� �����i��.\n"
-#~ "���i ��������� � CD ����� �� �����, �����i�� i� ���������� i ���i��i�� "
-#~ "��."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "��� �� ������� ���������� ��� ����'���� �� Internet �� ���, ��� �����,\n"
-#~ "������� ��������� �����. �������� ���� ������� ����� ������� ��������� "
-#~ "�����, DrakX������� ����\n"
-#~ "����������\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ��� �� �������� ����������� �� Internet �� ���, ���������\n"
-#~ "\"��������� ��������� ����\".\n"
-#~ "��� �� ������� ��������������� ����� ����� ����������� �� �� "
-#~ "����������\n"
-#~ "�� ��������������, ��������� \"��������\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "����� �� ���������. ������� ��������� ���� �� ����� �� ����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "����� ��������� ���� (����� \"COM1\" � Microsoft Windows) �������\n"
-#~ "\"ttyS0\" � Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "����� �� ������ ������ ��������� ���������� ����������.\n"
-#~ "��� �� �� ������� �� �� �������� ��� ����� ������, ���������� � "
-#~ "������nternet\n"
-#~ "����������. ��� �� �� ������� ���������� �� DNS ��������, ��� ����� \n"
-#~ "�������� ��� ��� �������� � ����� Internet-�����������."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "��� � ��� ������� �����, ��� �����, �������� ���, � ����� DrakX������ "
-#~ "��� ����������."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "��� �����, �������� ����� � ������� �������."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "��� �� �� ��������, �� �'�������� ����� �����������\n"
-#~ "���������� ��������� �� �� �� ������� ����� ����������� ��� ����� ������\n"
-#~ "����������\n"
-#~ "���������� ���� ���� �������� �� ������ ���������� Internet. ��� �� ��\n"
-#~ "������� ���������� �� DNS, ����� ���������� ����� �������� �� ������\n"
-#~ "���������� ��� ��� ��������."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "����� ����� �����i ��������� �������� ���� ����� (dialup). ���i ��\n"
-#~ "�� �������, ��� �������� �i����,\n"
-#~ "����������� �������� ��������� i��������� � ������ ���������� Internet "
-#~ "(ISP)."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "��� ���������, �� ������ ������ ��� ������ �����. ��� ��\n"
-#~ "�� ������� �� �� ��������, ��� ����� �������. ������ ���� ������."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "��� ���������, �� ������ ������ ��� ������ �����. ��� ��\n"
-#~ "�� ������� �� �� ��������, ��� ����� �������. ������ ���� ������."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "����� ����� �����i ��������� �������� ���� ����� (dialup). ���i ��\n"
-#~ "�� �������, ��� �������� �i����,\n"
-#~ "����������� �������� ��������� i��������� � ������ ���������� Internet "
-#~ "(ISP)."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "���i �� ��i������� ������������� proxy, i� ������ ����� �����i �����.\n"
-#~ "���i �� �� �������, �� ��� i��� �������, �����i���� �� ���i�i��������\n"
-#~ "����i �i �� Internet-����������."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "����� �� ������ ������ ������ ���� ������ � ������ ���������."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "�� ������ ������������� �������� ������� (������� � ����� ����'������)\n"
-#~ "�� �������� ������� (�������� ���� Unix, Netware �� ����� MS Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "��� �� ������� ���� ����, ��� �����, ������� ���� � ������ �����\n"
-#~ "CUPS �� LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS ���� �����, �������� � ������� ������ ����� ��� Unix ������ "
-#~ "(CUPS\n"
-#~ "- \"Common Unix Printing System\"). ���� ������ ����� �� ���������\n"
-#~ "����������� ������ Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR - ������ ������ ����� � ���������� ������ ������������Mandrake "
-#~ "Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� �� �� ����� ��������, ��������� \"����\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux ���� ��������� �� ������� ����� ��������. ����� � �������\n"
-#~ "�������� ������ �����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ������� ����� ���������� �� ����'�����, ������� \"��������\n"
-#~ "�������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ������� ���������� �� ��������� Unix ������, �������\n"
-#~ "\"�������� �������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ������� ���������� �� ��������� ������ Microsoft Windows (�� �� "
-#~ "Unix\n"
-#~ "������, ���� ������������ �������� SMB), ������� \"SMB/Windows 95/98/NT"
-#~ "\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "��� ����� �������� ��� ������� ����� ��������,� DrakX ������� ���.\n"
-#~ "\n"
-#~ "�� ������ ������� ��������� ����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ��� ��������: ����� �������� ������������ �� �������� ��� \"lp\"�� "
-#~ "��� ��������\n"
-#~ "���, �� ������ ���� ������� ����� \"lp\".\n"
-#~ "     ��� �� ����� ����� ���� �������, �� ������ ���� ��� ��� "
-#~ "������������. �� ����� ������ �������� �� ����� ������ ( \"|\").\n"
-#~ "     ���, ��� ����� ����� ������������� �����, �� ������ �������� "
-#~ "������ �� , �����.: \"My printer|lp\".\n"
-#~ "     ������� � ���� \"lp\" ����� ��������� ��������� �� ��������.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * �������: ���� ������������, ��� ���� ���� �������, ��� ������� "
-#~ "�������� ������� ������ ����'������ �� �� ��\n"
-#~ "     ���������� ������ ����� ����'������ �� ������ ��������.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * �����������: ��� �� ������� �������i�� ������ ���������� �������\n"
-#~ "     ����������� ��������, ������ �� ���� (�� ������� ����� �� ���\n"
-#~ "     �������, ��������� \"2nd floor\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "��� �� ������ ������ ��������� ����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ��� ����: ��������������� \"lp\" �� ��� �������� �� ��������. "
-#~ "���, �� ������ ���� ������� ����� \"lp\".\n"
-#~ "     ��� �� ����� ����� ���� �������, �� ������ ���� ��� ��� "
-#~ "������������. �� ����� ������ �������� �� ����� ������ ( \"|\").\n"
-#~ "     ���, ��� ����� ����� ������������� �����, �� ������ �������� "
-#~ "������ �� , �����.: \"My printer|lp\".\n"
-#~ "     ������� � ���� \"lp\" ����� ��������� ��������� �� ��������.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * ���������� spool: � �� ����������� ������ �� ��������� �����. "
-#~ "��������� �������\n"
-#~ "     �� ��������, ��� �� ������� �� ����� ����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ����������� ��������: ��� ������� ������ ������� � ����'������, "
-#~ "������� \"�������� �������\".\n"
-#~ "     ��� ������� ���������� �� ��������� Unix ������, ������� \"�������� "
-#~ "lpd �������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     ��� �� ������� ���������� �� ��������� ������ MS Windows (�� �� "
-#~ "Unix ������, ���� ������������ �������� SMB,\n"
-#~ "     ������� \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     ��� ������� ���������� �� ���� NetWare, ������� \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "��� ������� �� ��� ���������. ��� ����� ������� ��� ������� �� ���� ��\n"
-#~ "����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "�������� �������� ������������ �� ������� ������������ �����.��\n"
-#~ "������� \"/dev/lp0\" � GNU/Linux � \"LPT1\" � Microsoft Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "�� ������ ������ ��� ������� �� ����."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "��� �����, ������� �������� ����� � ������������� ������ ��������.\n"
-#~ "��� �����,������� ������������ ��� �� ������� ��� ������.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� �� �������, �� ������� �������� ������������ ����� ������������\n"
-#~ "�� ��������� ����� � �������� ��."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "����� �� ������ �������� ���i� ����� �������i \"���������\" ��i����� "
-#~ "���i��\n"
-#~ "����������i��. ��� ������� ����������i�� ������� �������� �� ������ �i "
-#~ "�������i\n"
-#~ "��i����� ���i��. ��� ������� ��i������ ���i�� ���������� ������� "
-#~ "��������i\n"
-#~ "(����i���� ����������, ��������i �������,...) i ������ \"����i �������"
-#~ "\",\n"
-#~ "� ��i� ���������� ����� ��������i.\n"
-#~ "\n"
-#~ "\n"
-#~ "��-������, �������� ������ ��� ����! ����� ���i �� ������� ���i���\n"
-#~ "����������i��� ����� ������, �� ������������� �������i�� � ������i\n"
-#~ "���������������i�� ��� ��������� �����: ���� ������� ���i��� �������\n"
-#~ "������i. ������� ��i����� �i����� ��������� �������� �����.\n"
-#~ "\n"
-#~ "\n"
-#~ "���� �������i�� � �i����� ��������� � ������i ���������� ����������i��,\n"
-#~ "����� �� ����� i ��������, � �������i�� � ������i root ��������� �����i\n"
-#~ "� �����i ���i�i����������� i ������������ �i�����."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "��������� boot ����� ������ �������������! ��� �� �� �������\n"
-#~ "�������� ��� ����'����, ��� ���� ��� ����� ������ �������\n"
-#~ "����� ��� ������ ���������������."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "������� ��������� SILO:\n"
-#~ "  - ����������� ����������: ������� �����, ��� �� ������� �����i��\n"
-#~ "i���������, ��������� ��� �������i GNU/Linux. ���i �� ��������, ���\n"
-#~ "���i�� ����i����, ������� \"����� ������ ����� (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - �������� �� �������� ����� ��������� �������: ����� ��� � ��������\n"
-#~ "�������, �� ������� ����� ��������� ����� ����� ��������� ������� �� "
-#~ "��������.\n"
-#~ "���� ��������� ������� ��� �i�����, ��i� ������ ����������� � ���������\n"
-#~ "����� ������ ������ ��������� ����i�����. ��������� �� �����, ���i "
-#~ "\"��������\"\n"
-#~ "\"��������\" �� ����� ��������� �i ���������� �� ����."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO - ���� ��������� ��� SPARC. �� ���� ������i�� ������\n"
-#~ "GNU/Linux �i ����� i���� ����������� �i�����, ����������� �� ���������.\n"
-#~ "��������, ����� i���� ����������� �i����� �������� ����������� i\n"
-#~ "����븢������. ���i ���� �� ����������, �� �� ������ ������ ���� ���i�\n"
-#~ "����������. ������� ��������, ��� �� �����i ��������� ���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "������� �� ������ �������� i �� ������� i���� ����������� �i�����.\n"
-#~ "� ���i� ������� �������� �����i�� ���������� ���i��. ��� � ���� ��� \n"
-#~ "����� �������� i����������� ����, ��� ������i���."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "������� ��������� SILO:\n"
-#~ "  - ����������� ����������: ������� �����, ��� �� ������� �����i��\n"
-#~ "i���������, ��������� ��� �������i GNU/Linux. ���i �� ��������, ���\n"
-#~ "���i�� ����i����, ������� \"����� ������ ����� (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - �������� �� �������� ����� ��������� �������: ����� ��� � ��������\n"
-#~ "�������, �� ������� ����� ��������� ����� ����� ��������� ������� �� "
-#~ "��������.\n"
-#~ "���� ��������� ������� ��� �i�����, ��i� ������ ����������� � ���������\n"
-#~ "����� ������ ������ ��������� ����i�����. ��������� �� �����, ���i "
-#~ "\"��������\"\n"
-#~ "\"��������\" �� ����� ��������� �i ���������� �� ����."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "����� ������� ������i�� X Window System, ���� �'��������\n"
-#~ "������� Linux GUI (����i��� I�������� ����������i��). ����� ������\n"
-#~ "�������� ������i�� �i�������� i ���i���. ������� ������ ����� �����\n"
-#~ "�������������, ���� ���� ����� ���� ���������� � ��������\n"
-#~ "���i�� ��������i i ������������� ������� ��������� :)\n"
-#~ "\n"
-#~ "���i ����i��������� ����������, ����� ��������� X  (���i �� ��\n"
-#~ "������i�� DrakX �� ���i�� ������), ��� �� �����i ���������, �i ������\n"
-#~ "�� � ����������i. ���i ��, �� ����� ������� �������� i ������� i�\n"
-#~ "�����i ��� ��������."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "���i ����� �� ��� � ���������� X, ����������� ����� ��������� ��� \n"
-#~ "��������� ��������i X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "���i �� ������� �������� ����i����� ������� (login), ������� \"���\". "
-#~ "I���� - \n"
-#~ "\"��\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "�i����� ��i������ ����������i���.\n"
-#~ "\n"
-#~ "����� �����������i, ���� ����� �i����� Mandrake Linux ������i��� "
-#~ "����������.\n"
-#~ "���i �� ������� ����������i�� ��� i���� ����������� �i�����, ������� \n"
-#~ "���������� i��������i."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "���i� /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "����������� ��"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "����� ������������ ��i� ��������,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "��� �������� � ����� ��������� ������ ��������"
-
-#~ msgid "Reload"
-#~ msgstr "����������i��"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "�i ������� �� �������� ������������ ����i-���� ��� ����i����i linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "��������� ADSL"
-
-#, fuzzy
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "�������� CUPS ������ �� �������� �� ��� �������� ��������\n"
-#~ "�� ����� ������, �� ����� ��������� ����������.\n"
-#~ "��� �� �� ��������, ������� \"�������� ������ CUPS\"."
-
-#~ msgid "Remote queue"
-#~ msgstr "��������� ����� �����"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "��������� ����� �����"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "I�� ������"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "I�� �������i"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "����i������� ����i"
-
-#, fuzzy
-#~ msgid "Profile "
-#~ msgstr "������� ����i�������: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "I�� ��������"
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "��������� �� I��������"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "��������� �� I��������"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "��������� �� I��������"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "��������� �� I��������"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "I�� ��������"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "�� ���������"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "�� ������������ ���������� ����� ����� ��������."
-
-#~ msgid "Disable network"
-#~ msgstr "����i�� ���������� �������� ��������"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "����i�� ���������� �������� ��������"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "����� �� ������ ����������� ���� ���. ���������� �� ����� �\n"
-#~ "����� ����. ��� ����������� ���������� ��������� \"������\" ��� "
-#~ "����������\n"
-#~ "���� �������."
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "���� ����"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "�� ������ ��������� ������� URI ��� ��������� �� �������i � CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "���, ����������� �������� ������ ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "���, ����������� �������� ������ PostScript"
-
-#~ msgid "Paper Size"
-#~ msgstr "������ ������"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "����������� ������ ����� �����?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "��������� �������� Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "��������� ����i�i ������"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "��������� ����� �� PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "����������� ����������� �����?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "����� �������i �� ��������i ������������ ��������"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "������/����� ���i � ������� (1/72 ������)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "�������/�i���� ���i � ������� (1/72 ������)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "���������� ����i GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "���������� ��������� ������"
-
-#~ msgid "Reverse page order"
-#~ msgstr "��������� ������� ��������"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "����� ���� �������� � ��������� ���������"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "������ ����� �����, � ���� ����������� ������i ��� �����, �������� "
-#~ "���������� i�� (�������� lp). ����i� ���������, ���i� �� ��i����� "
-#~ "�������i �i\n"
-#~ " ��� �������������, ������ ���� ���������. ���� i�� �� �������i �� "
-#~ "�������\n"
-#~ "������������ i �� ����� �������� ����������?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "������ ����� �����, � ���� ����������� ������i ��� �����, �������� "
-#~ "���������� i�� (�������� lp) i ����������� � �� �������� ����i���. "
-#~ "�������� i�� i ������� ��� ����i."
-
-#~ msgid "Name of queue"
-#~ msgstr "I�� ����i �����"
-
-#~ msgid "Spool directory"
-#~ msgstr "���������� ����i���"
-
-#, fuzzy
-#~ msgid "Disable"
-#~ msgstr "����i��"
-
-#, fuzzy
-#~ msgid "Enable"
-#~ msgstr "����i��"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "��� ������i�� ������� �i�����, ��������� ������ \"���������� ������� ����"
-#~ "\"\n"
-#~ "i \"���������� �����i MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "���i � ����� ����� ��������������� NIS, ������� \"������������ NIS\". "
-#~ "���i\n"
-#~ "�� �������, ��������� ���i�i�������� ����i."
-
-#~ msgid "yellow pages"
-#~ msgstr "����� �������i"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "��������� ADSL"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 ����������"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 ����������"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "�� �� �������� ��������� �� I��������?"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "������� ����"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "��i ��� ������ ISDN ��������?"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "��������� IDE"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "���������: ������ ����i��"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr " ���� ������� ������ ������� ��� �����i ��� usb ����."
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "��������� ����� �����������"
-
-#, fuzzy
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "��� ����'���� ���� ���� �������������� �� �������� ������������\n"
-#~ " ��������� (Internet Connection Sharing)?\n"
-#~ "\n"
-#~ "������: ��� �������� ������� ������� ��� ����������� �� ���.\n"
-#~ "\n"
-#~ "�� ������� ���������� ������� ������ �� Internet?"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "�������� �����������"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "��������� LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "�������� ����. ����"
-
-#~ msgid "Choice"
-#~ msgstr "�����"
-
-#, fuzzy
-#~ msgid "gMonitor"
-#~ msgstr "���i���"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "������"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "���������� ������i"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "�� ���� ������������� ����i������� ��� �����i� �����i ������i"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "���������: ��� �����I� ����I ������I ������ �� ROOT � ������I �� "
-#~ "�����������!\n"
-#~ "���i �� ������� �������i�� �� root, ���������� �� ����������i�, ����� \n"
-#~ "���������� \"su\".� ���i� �������, ������ ������������� ������ �� ��� "
-#~ "�����,\n"
-#~ "� �����i �� ������.\n"
-#~ "����� �� �����, ��� �� ���i ������������."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "������� �����i��, ��������� NumLock ���� �������i �� ����������\n"
-#~ "����� ����i����� (���������, ���i�� �� `p' ��� `6')."
-
-#, fuzzy
-#~ msgid "Actions"
-#~ msgstr "�������������"
-
-#~ msgid "Scientific applications"
-#~ msgstr "��������� �����������"
-
-#~ msgid "First DNS Server"
-#~ msgstr "����� ������ DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "����i ������ DNS:"
-
-#, fuzzy
-#~ msgid "using module"
-#~ msgstr "����� ��������"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s ��� ���������������"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: ���� �� �������� �������, ���i ����� ������� i���."
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(���� ������� ��i������ ��������)"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (����������)"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus Mouse"
-
-#~ msgid "Add location of packages"
-#~ msgstr "������ ����i�� ������"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "����� %s �������� %s,"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "����� Alcatel"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "��� ���������� �������� ���i��� ���� ������������� ��� ������������\n"
-#~ "(������������ ������� ��������� �������� �i�����). � ����� �i�����i\n"
-#~ "����� ������������ ��� i������� �������� ����� ��i������ ��������,\n"
-#~ "��i� ����������� �� i�. ������: ����������� i������� �������� �� "
-#~ "����������,\n"
-#~ "�����i�� ���i ��� ��������� ����� i ��������, ��i� �� ������� ��������.\n"
-#~ "�������� ��������� /home i /usr/local."
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB ���"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB ��� (2 �����i)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB ��� (3 �����i �i �����)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB ���"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB ��� (2 �����i)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB ���� (3 �����i �i �����)"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "�� ��������, ��� ������� ���������� ������ ����������� �� �������?\n"
-#~ "� ����� ������� �� ������� ���� ������ �������� ��� �������� "
-#~ "�����������,\n"
-#~ "��� ���i�i ������i ������ ���� ���������.\n"
-#~ "\n"
-#~ "��� ������ ���������, ���������, ���i� ������i: ``�i ������������� "
-#~ "������\n"
-#~ "���� �������?'' �i ������������ �� �� ������ �� ����� ������i?"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "����� ����� ���������, ��i� �������� ������������� ��� �����������\n"
-#~ "����� �i����� Mandrake Linux, ���i ��� ��� ���i ��������� (��� "
-#~ "����������\n"
-#~ "����������� Linux ����� i���� ���������� ����i���). � i���� ��������\n"
-#~ "�������� ��������� ����� ���i��� ���� ���������. ���� �������� ���������� "
-#~ "�\n"
-#~ "���i����� ����i��� �������� �������� ����'����� �� �������i\n"
-#~ "��������� ������������.\n"
-#~ "\n"
-#~ "\n"
-#~ "���i �� �������� �������� ����� ��������, ���� ������ ���������� �����\n"
-#~ "\"���� �����������\", ��� ���������� �������� �������� GNU/Linux. �� "
-#~ "������\n"
-#~ "��������� ���� ��� ����i���, ���i����� �� \"hda\" ��� ������� IDE "
-#~ "�����,\n"
-#~ "\"hdb\" ��� ������� ����� �i \"sda\" ��� ������� SCSI ����� i �.�.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ��������� �������� ���������: ������� ������� (/), ��i �'�������� "
-#~ "����������\n"
-#~ "������� i�����ii �������� �������� �i�����, i /boot, ��i ������� ���\n"
-#~ "�����, ���������� ��� ������� ����������� �i����� ��� ��������i "
-#~ "����'�����.\n"
-#~ "\n"
-#~ "\n"
-#~ "�������i ���i�i ������ ������� �������� �����������, ����i��� �� "
-#~ "��������\n"
-#~ "���� ���������� ���i���. DiskDrake �������� ���� ������, ���� ����������\n"
-#~ "���i��� ��i�����. �������i�� ������������ i ������������� ������.\n"
-#~ "\n"
-#~ "\n"
-#~ "������� ����� �������� ��� ��������� �� ������ ��������� � ���������\n"
-#~ "����i�����, ��������� ������������ ���i� ���������i � ��������� ����i�� "
-#~ "Tab\n"
-#~ "i Up/Down. ���i ������� ������, �� ������ �������������:\n"
-#~ "\n"
-#~ "- Ctrl-c  ��� �������� ���� ������� (���i ��������� ������ ����� "
-#~ "�������)\n"
-#~ "\n"
-#~ "- Ctrl-d  ��� �����i�� �������\n"
-#~ "\n"
-#~ "- Ctrl-m  ��� ��������� ����� ����i�������.\n"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "������������� ����i"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "������������ ���������� ������ ������"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "����������� ����� ������ ������"
-
-#~ msgid "Available packages"
-#~ msgstr "��������� ������"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "������ �������� (kickstart) ���� %s (������� %s)"
-
-#~ msgid "Category"
-#~ msgstr "���������"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "�������� Chat (IRC or instant messaging), ���� xchat, licq, gaim � �.�."
-
-#~ msgid "Checking dependencies"
-#~ msgstr "�������� �����������"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "%s or %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "������� \"����������\", ���i � ��� ���� �� ���������� �i ������ ����ii\n"
-#~ "GNU/Linux, �����, ���i �� ������� ������������� �������i ����i�� �i "
-#~ "������������.\n"
-#~ "\n"
-#~ "������� \"����������\", ���i �� ������� ���������� ����������� ���������� "
-#~ "����i� Mandrake Linux:\n"
-#~ "%s ����� %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "�������:\n"
-#~ "\n"
-#~ "  - �������������: ���i �� ����� �i���i �� ����븢���i \n"
-#~ "    GNU/Linux, �������� ���� �����.\n"
-#~ "\n"
-#~ "  - �� ������: ���� ����� ������������� � ��� �������, ���i �� "
-#~ "��������i \n"
-#~ "    ����� � GNU/Linux, i ������� ���i ������� ����������\n"
-#~ "    ������ i ������������ ��� ������ ���������. �����i�� �i��� "
-#~ "�������������.\n"
-#~ "\n"
-#~ "  - �������: ����� ������ ������ ��������, ��� �� �������� ��������� GNU/"
-#~ "Linux\n"
-#~ "    i ������� ������������� �����i �������� �����������. �� i � "
-#~ "�������\n"
-#~ "    \"�� ������\"��� �������� ����� ������� ���������� �������� i \n"
-#~ "    ������������ ������ ���������.\n"
-#~ "    ���i �����, �� ��I����� ���� �����, ���I �� ��ݡ����, ��� ���I�� "
-#~ "����I����!\n"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "������� \"����������\", ���i � ��� ���� �� ���������� �i ����� ����ii\n"
-#~ "GNU/Linux, �����, ���i �� ������� ������������� �������i ����i�� �i "
-#~ "������������.\n"
-#~ "\n"
-#~ "������� \"����������\", ���i �� ������� ���������� ����������� ���������� "
-#~ "����i� Mandrake Linux:\n"
-#~ "\n"
-#~ "\n"
-#~ "�������:\n"
-#~ "\n"
-#~ "  - �������������: ���i �� ����� �i���i �� ����븢���i \n"
-#~ "    GNU/Linux, ������� ���� �����.\n"
-#~ "\n"
-#~ "  - �� ������: ���� ����� ������������� � ��� �������, ���i �� "
-#~ "��������i \n"
-#~ "    ����� � GNU/Linux, i �������� ���i ������� ����������\n"
-#~ "    ������ i ������������ ��� ������ ���������. �����i�� �i��� "
-#~ "�������������.\n"
-#~ "\n"
-#~ "  - �������: ����� ������ ������ ��������, ��� �� �������� ��������� GNU/"
-#~ "Linux\n"
-#~ "    i ������� ������������� �����i �������� �����������. �� i � "
-#~ "������� \n"
-#~ "    \"�� ������\"��� �������� ����� ������� ���������� �������� i \n"
-#~ "    ������������ ������ ���������.\n"
-#~ "    ���i �����, �� ��I����� ���� �����, ���I �� ��ݡ����, ��� ���I�� "
-#~ "����I����!\n"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n"
-#~ "Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1\n"
-#~ "(Helios) or Gold 2000."
-#~ msgstr ""
-#~ "������� \"�����������\", ���i ���� ����������� ����� ������ Linux,\n"
-#~ "����� ���i ������� ������������� �������i ������������ ����� �������.\n"
-#~ "\n"
-#~ "\n"
-#~ "������� \"�����i��\" ���i �� ������� �����i�� ���������� ����i�\n"
-#~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus),\n"
-#~ "6.1 (Helios) ����� Gold 2000."
-
-#~ msgid "Collapse all"
-#~ msgstr "�������� ��"
-
-#~ msgid "Communication facilities"
-#~ msgstr "����� ������������"
-
-#~ msgid "Configure LAN"
-#~ msgstr "��������� ����i (���)"
-
-#~ msgid "Configure timezone"
-#~ msgstr "��������� �������� �����"
-
-#~ msgid "Confirm Password"
-#~ msgstr "���������i�� ������"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "��������� �� I������� ���� ������ (�����)"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "��������� �� i������� ���� DSL (�i ADSL)"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "�������� � i������� �� ISDN"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "�������� � i������� ���� �������� �����"
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "�� ������������ ���������� RPM ``bind'' � ��������� urpmi."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr ""
-#~ "�� ������������ ���������� RPM ��������� ������� ���� � ��������� "
-#~ "urpmi."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "�� ������������ ���������� RPM ``dhcp'' � ��������� urpmi."
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "�� ������������ ���������� RPM ``ipchains'' � ��������� urpmi."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "�� ������������ ���������� RPM ``linuxconf'' � ��������� urpmi."
-
-#~ msgid "Cryptographic"
-#~ msgstr "����������i�"
-
-#~ msgid "Customized"
-#~ msgstr "�� ������"
-
-#~ msgid "Czech"
-#~ msgstr "�����i"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "������� � ������ ���� �������� (mysql and postgresql)"
-
-#~ msgid "Directory"
-#~ msgstr "�������"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "�� ����븢���� �����"
-
-#~ msgid "Do you want to configure a ISDN connection for your system?"
-#~ msgstr "�i ������� �� ������i�� ISDN �������� � ����� �i�����?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "�i ������� �� ������i�� ����������� �������� ���� ����� �� �i�����?"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "�i ������� �� ������i�� �������� ����i������� ����� �i�����?"
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "�������� ����������i���� ������"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX �������� ��������� �����i ���i� �i �������i �������� PCI\n"
-#~ "i SCSI. ���i ������� ��������, i DrakX ������, ��i �������\n"
-#~ "��� ��� ��������, ����� ������� ����� �������� ����������.\n"
-#~ "\n"
-#~ "���i �� ����� SCSI ������� �� ISA-, ����� PCI-�����, ��� DrakX �� �����\n"
-#~ "��i ������� ���������� � ����� ������, �i DrakX ������, ��� �� �� �����\n"
-#~ "SCSI �������� �������, � ��� ���������, �i ���� �� � ��� ����� ��.\n"
-#~ "���i � ��� ��� ����, ���������� \"��\". ���i ���� ���i� �i �������i,\n"
-#~ "���������� \"���\". ����� ������ �'��i��� ��i� ��������, � ��i� ���\n"
-#~ "�������� ����� ������� �����������.\n"
-#~ "\n"
-#~ "����� ������ ��������, DrakX �������, �i �� ������� �� ������\n"
-#~ "��� ��� ���������� ��������i. �������� ����� ������� ��������� "
-#~ "������������:\n"
-#~ "�������� �� ������ �����.\n"
-#~ "\n"
-#~ "� ���������� �������, �� ����������� ��� i��������� �� �����������i, "
-#~ "����\n"
-#~ "����� �������� �� Windows (���i ��� �������i��� � ����� �i�����), � "
-#~ "�������\n"
-#~ "��� ��������i� �� ������� ����� �������. ��� ��������� ��� ��������i, "
-#~ "��i�\n"
-#~ "��������� ������ ��������."
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX �������� ����i���������� ����� ��� XFree 3.3 i XFree 4.0.\n"
-#~ "�� ��������� ��������������� ������ 4.0. ���i ���� �i�������� ��\n"
-#~ "��������i������ i�, ���� ����� ����������� ������ 3.3.\n"
-#~ "�i �������� �� ���i���� XFree 3.3 � �i�����?"
-
-#~ msgid "ECI modem"
-#~ msgstr "����� ECI"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "��������� num lock ��� ������"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "������ ������� ��� ���i�� ���������� � HTP\n"
-#~ "(��� �������� �� ����� ������� ������ ��i�����)"
-
-#~ msgid "Everything configured!"
-#~ msgstr "�� �����i��������!"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "�� �����i��������.\n"
-
-#~ msgid "Expand all"
-#~ msgstr "���������� ��"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "�� ���������� �������� ����. ������� � HTP.\n"
-#~ "�������, �������� ����������i�� ����������� � ``%s'' � ���������i"
-
-#~ msgid "Find Package"
-#~ msgstr "����� ������"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "������i �����, ��i ��� ����"
-
-#~ msgid "Finding leaves"
-#~ msgstr "����� �i���"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "����� �i��� �������� �������� ���"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "��� FTP i HTTP, �� ���i��� ��������� ����������� hdlist\n"
-#~ "��������� ������� ����� ����������� URL"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "������ �������i?"
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linux ���� ��������� �� �����i�i�i �����i ������������ �������. ����� � "
-#~ "�����\n"
-#~ "���� �������� ������� �����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "���i ���� ������� ��� ���������� �������� ���������� �� ������ "
-#~ "����'�����,\n"
-#~ "������� \"�������� �������\". ��� ����� �������� ���������, �� ����� "
-#~ "�����\n"
-#~ "�������� ������� i ������� ����������� �i����.\n"
-#~ "\n"
-#~ "\n"
-#~ "���i �� ������� �������� ������ �� ��������, ��i �������i��� �� "
-#~ "���������\n"
-#~ "������ Unix, ��������� ������� \"��������� ����� lpd\". ��� ������i�� "
-#~ "���\n"
-#~ "���������, i�� i ������ �� ��������, ��� ��������� ������ i�� ����i "
-#~ "�����\n"
-#~ "�� ����� �������.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ������� �� �������� SMB (��i �������i��� �� ��������� ������\n"
-#~ "Windows 9x/NT/2000 �i Unix � �������� Samba), ��������� ������ ��� i��\n"
-#~ "SMB (���� ���� �� �������� � ��� i����� � ����i TCP/IP), i, �������,\n"
-#~ "��� IP ����� i i�� ����������i��, ������� ����� i ������ ������� ��\n"
-#~ "��������, � ������� i�� ��������. ��� � ����� i ��� ��������\n"
-#~ "NetWare, �����i �� ����������� i��������� �� ��������� �����."
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (����������)"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "������i (1TR6)"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "����� i�� (����.: `extra', `commercial')"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr ""
-#~ "����� ���������� %d M�. ����� ������ ����� �������� ��� �����������."
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "������ �������� ����� %s"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "SILO ������� ��������� ������.\n"
-#~ "�� ������ ������ ����, ����� ����i�� i�������."
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "����� ������������ ������i ��������� ������ ������ (����.: 800x600).\n"
-#~ "� �����i ����i� ������� ���� ���� �������i �� �������� ����'����� .\n"
-#~ "������� ������������?"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "������i ISDN �����:\n"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "��������� ������i�������� ���� �������� �����, ��� ������� ���� ��������� "
-#~ "�� I��������."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "���i DrakX ����i���� ������ ���� ���, ������ �������� � ����\n"
-#~ "i��� �����. � ����i������ ������� ������� ����������� �������\n"
-#~ "�������� ���� �� ��i�� �����.\n"
-#~ "\n"
-#~ "\n"
-#~ "� ������� ����, ���� �������� �� ����������� �����, ��� ����������� "
-#~ "�������i��\n"
-#~ "DrakX ����i���� ����� ����������� �����, �� ����� ��� ��������."
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "���i ��� ADSL ����� ���� � ������� Alcatel, �������� Alcatel. � i���� "
-#~ "������� - ECI."
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "���� ���i�� ������ �����������?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "�����������/�����������"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "����������� SILO �� ����������. ���i��� ��������� �������:"
-
-#~ msgid "Installed packages"
-#~ msgstr "����������� ������"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "��������� ����������i�� ����������� i ������i��� � �������"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "��������� ����������i�� ����������� � �����i ����������i"
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "�������i�� ����������� �������� ��� \"���\"! ���� ���������, ���i ��\n"
-#~ "������������ Windows, ��� �������i�� ���������� ������.\n"
-#~ "���i �� �� �������i ���������� ����, �� ����� �� �������� ������i��\n"
-#~ "Linux!"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (����������)"
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) ���� ��������� Linux i i���� ����������� �i�����.\n"
-#~ "�������� ��� �������� ����������� ��� �����������. ���i �� �� ������i\n"
-#~ "��� �i����, ��i� ���i ���������� �� ������, �� ������ ������ �����\n"
-#~ "���� � i� ����� �������i.\n"
-#~ "\n"
-#~ "\n"
-#~ "���i �� �� �������, ��� ��� ���i ������ �� ����� � i�, �����i�� �� �����\n"
-#~ "(����� �� �������i ����������� ���������� ����)."
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "�i����� (��������� ��� ��������� �������� SCSI)"
-
-#~ msgid ""
-#~ "Linux does not yet fully support ultra dma 66 HPT.\n"
-#~ "As a work-around i can make a custom floppy giving access the hard drive "
-#~ "on ide2 and ide3"
-#~ msgstr ""
-#~ "Linux ������ ���� �� ������ ��������i��� ultra dma 66 HPT.\n"
-#~ "�� �������, ���� �������� �������, ���� ����������� ������ �� ����� �� "
-#~ "ide2 i ide3"
-
-#~ msgid "Local LAN"
-#~ msgstr "��������� �����"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "�������� ������� (URI)"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "��������i ��������� ����i ��� ���������.\n"
-#~ "�i ������� ��:"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus Mouse"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (����������)"
-
-#~ msgid "Logitech MouseMan/FirstMouse (serial)"
-#~ msgstr "Logitech MouseMan/FirstMouse (����������)"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus Mouse"
-
-#~ msgid "Microsoft IntelliMouse (serial)"
-#~ msgstr "Microsoft IntelliMouse (����������)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A ����� ����� (����������)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft ������i��� (����������)"
-
-#~ msgid "Move your wheel!"
-#~ msgstr "��������� ���� ����"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "cdrom ���������� (�i���� ���� � /mnt/cdrom)"
-
-#~ msgid "No match"
-#~ msgstr "�� ���������"
-
-#~ msgid "No more match"
-#~ msgstr "����� �� ���������"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "������������ ������ �� ���������.\n"
-#~ "����������� ������� i���� �i�������� �i ���i���"
-
-#~ msgid "Other countries"
-#~ msgstr "I���� ���i��"
-
-#~ msgid "Package"
-#~ msgstr "�����"
-
-#~ msgid "Password:"
-#~ msgstr "������:"
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "��i ������� ����� ������� ������������� � �����i ����������?"
-
-#~ msgid ""
-#~ "Please choose which network adaptater do you want to use to connect to "
-#~ "internet.\n"
-#~ "If you don't know, choose eth0.\n"
-#~ msgstr ""
-#~ "���i �����, �������� ������� �������, ��i �� ������� ������������� ����� "
-#~ "��������� �� I��������.\n"
-#~ "���i �� �������, �������� eth0.\n"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "��������� ��������� i���������"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "��������i�������� ��������� �����"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Rescue"
-#~ msgstr "�����������"
-
-#~ msgid "SILO main options"
-#~ msgstr "������� ����i SILO"
-
-#~ msgid "Sciences"
-#~ msgstr "���������"
-
-#~ msgid "Search"
-#~ msgstr "�����"
-
-#~ msgid "Searching root partition."
-#~ msgstr "����� ���������� �������."
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "������� �������� ����� �����������"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "�������:\n"
-#~ "\n"
-#~ "  - �������������: ���i �� ����� �i���i �� ����븢���i Linux.\n"
-#~ "\n"
-#~ "  - �� ������: ���i �� ������ � Linux, �� ����� ������ ��������� \n"
-#~ "������� ������������ �i�����: ���������, ��� �������������, �����\n"
-#~ "������. ������� \"��������\" ��� ����������� �i����� ��������� "
-#~ "�����������.\n"
-#~ "����� \"��� ���������i\" ���������� ��� ���, ��� ������������ "
-#~ "����'����\n"
-#~ "�����i�� ��� ���������i ��������. ���i �� ������� ���������� ������ "
-#~ "���������\n"
-#~ "����������� (��� �����, �����, ...), ���� ������� \"������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - �������: ���i �� �������� ��������� GNU/Linux i ������� �������i\n"
-#~ "����������� � ������������ ����������, ���� ���� ����������� - ��� ���.\n"
-#~ "�� ������� ������� ������ ����������� �i�����, �� � ��������  \"�� ������"
-#~ "\"."
-
-#~ msgid "Setup SCSI"
-#~ msgstr "��������� SCSI"
-
-#~ msgid "Show less"
-#~ msgstr "�������� �����"
-
-#~ msgid "Show more"
-#~ msgstr "�������� �����"
-
-#~ msgid "Show only leaves"
-#~ msgstr "�������� ��� �i���"
-
-#~ msgid "Shutting down"
-#~ msgstr "���������� ����'�����"
-
-#~ msgid "Size: %d MB"
-#~ msgstr "�����: %d MB"
-
-#~ msgid "Size: %d MB\n"
-#~ msgstr "�����: %d MB\n"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "�����: %s M�"
-
-#~ msgid "Slovakian"
-#~ msgstr "�������i"
-
-#~ msgid "Small(%dMB)"
-#~ msgstr "���� (%dM�)"
-
-#~ msgid "Socket"
-#~ msgstr "�����"
-
-#~ msgid "Sort by"
-#~ msgstr "������������ ��"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "������������� ��� �������� ��������"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "��������� ������ ������ �������� � �i�����"
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "����� �������� ������������ ������� ������. ����� �������� �����\n"
-#~ "�������i ��i�i�� ����, ���i �� �� �����i ��������� i������� �i�����,\n"
-#~ "�� � �����i� ������� ���� ���� ����������� ���� �� ������� ���������\n"
-#~ "��� �������i������ �i�����."
-
-#~ msgid "This label is already in use"
-#~ msgstr "����� ����� ��� ���������������"
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "���� ������� ���������� ��������� ��������� ����i,\n"
-#~ "(LAN), ����� ������. \n"
-#~ "\n"
-#~ "������� \"��������� �����\" i DrakX ��������� �����i\n"
-#~ "�� ����� ������ ������� Ethernet. �������� PCI ���i��� ���� ���������\n"
-#~ "i ��������� ����������. �����, ��� ����������i ISA,\n"
-#~ "�������������� �� ������, i ��� ���������� ���i���� �������\n"
-#~ "�� ��i��, ��i �'��i��� ����� ������ � ����� �������.\n"
-#~ "\n"
-#~ "\n"
-#~ "�� i ��� �������� SCSI, �� ������ ������i�� �������� ���������\n"
-#~ "������� ����������, i���� ���������� �������� �������� ��������i,\n"
-#~ "��i� �� ���������� � �����������i �� ������ ������������.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ����������� Mandrake Linux �� ����'����, ��i ������ �� ���\n"
-#~ "���������� �����, ���i�i�������� ����i ���������� �������i��\n"
-#~ "��� ��� ���������� i��������� (IP �����, ����� �������i\n"
-#~ "�i ��������� ��������, i i�� �����). ���i �� ���������\n"
-#~ "��������� �����, ��������� ����, �� ���i��� �������\n"
-#~ "��� ��������i ����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "������� \"�������� ���� �����\" ��� ��������i ��������\n"
-#~ "� ��������� ���������� ������ Internet ���� �����. DrakX ���������\n"
-#~ "������i ��� �����, ��� ���i � ��� ���� �� ����������, ��� �����\n"
-#~ "�������� ���������� ��������� ������� ����, �� ����� �������� �����."
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "��� (���) �����������i, ����� �����\n"
-#~ "������ �������. (���i���� ������, ��� �����i��)"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "��� ������ ������������ ������ ������ ����� ���������� ������ ������. \n"
-#~ "��� ����� ����� �i����... ���i ��� �� ���������� �i�����, ��� ����� \n"
-#~ "���������, ���� ����� ���������� ����� ������ �����."
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "����������� ����������/��������"
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "������� ������ ������: %dM� �� ����i�� � %dM�"
-
-#~ msgid "Tree"
-#~ msgstr "�����"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "������������ ������i %s �������?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "������������ ������i PCI �������?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "������������ ������i ����� PCMCIA?"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "������������ ������i �����?"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "URI ��� ���������� ��������"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL ��������, ��i ������� RPM"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB ��� (3 �����i �i �����)"
-
-#~ msgid "Update location"
-#~ msgstr "����i�� ����i��"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "��������� ���� ������ RPM"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "������������� �����i MD5"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "������������� DiskDrake"
-
-#~ msgid "Use shadow file"
-#~ msgstr "������������� ������ ����"
-
-#~ msgid "User name:"
-#~ msgstr "I�� ����������i��:"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "�� ����� ����� �������� ��� ������� \n"
-#~ "(/dev/lp0 ���i�������� LPT1:)?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "��� �� ������� �������?"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "��� �� ������ ����i��?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "��i ��� ����� ����?"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "��i ��� ����� ����i�����?"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "����� ���� �� ������� ������������� ������?"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "���� ������������ ��i�����?"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "��i ��������� ��������� �� ������� �������������?"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "��i ���� �� �������?"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "��i� ������ ������"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "��i ��� �������� ��� ��������?"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "�� ����� ����������� ����� �������� ���� ���?"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "� ��� �� ����� ����� ��� Lnx4win"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "�� �� ����� ��i��i� Windows ��������!"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "����� ����� ������ ������ �������, ��i� �� ������� ����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "��-������, �� ������ ������ ����� ������ ��� ���������� �i �����i��. "
-#~ "�����\n"
-#~ "�� ������ ��������� ����� ������ � �����������i � �������� �������, ��i\n"
-#~ "�� ������� ������.\n"
-#~ "\n"
-#~ "\n"
-#~ "���i �� �������� � ������ ��������, ���� ������ ����� ��i���� "
-#~ "i����i�������.\n"
-#~ "����� �� �����, ��� ��������� ������ ���������� ����������� i���� "
-#~ "������.\n"
-#~ "���� ������� ����������� ������. ������, ��i� �� �����i, i ������,\n"
-#~ "�� ��i� ��� ��������, ������ ���������� ������ ����� �����������.\n"
-#~ "��������� ���������� ����� �� ����������� ��i� ������, �� ��i� �� "
-#~ "��������."
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "��� �����'���� ���� ���� �����i�������� �� ��������� I�������-��������.\n"
-
-#~ msgid "automagic"
-#~ msgstr "������i���"
-
-#~ msgid "beginner"
-#~ msgstr "���������"
-
-#~ msgid "brunette"
-#~ msgstr "������"
-
-#~ msgid "changing type of"
-#~ msgstr "�������� ����"
-
-#~ msgid "default"
-#~ msgstr "�� ���������"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "�� ������������� pppoe"
-
-#~ msgid "girl"
-#~ msgstr "��������"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (�����)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (�����)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (�����i �����)"
-
-#~ msgid "linear"
-#~ msgstr "�i�����"
-
-#~ msgid "loopback"
-#~ msgstr "�i��������� �������� �i����� (loopback)"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "������� ����i������� nfs"
-
-#~ msgid "pptp alcatel"
-#~ msgstr "pptp alcatel"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake ����� � ������ ``low memory''.\n"
-#~ "rpmdrake ����� ������������� ����� ������������ ������ �����"
-
-#~ msgid "tie"
-#~ msgstr "��������"
-
-#~ msgid "woman-blond"
-#~ msgstr "�������-���������"
diff --git a/perl-install/share/po/bg.po b/perl-install/share/po/bg.po
deleted file mode 100644
index 7bea7e548..000000000
--- a/perl-install/share/po/bg.po
+++ /dev/null
@@ -1,13898 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999, 2000 MandrakeSoft
-# Elena Radeva <ely@triada.bg>, 1999.
-# Pavel Cholakov <pavel@linux.home.bg>, 1999.
-# Boyan Ivanov <boyan17@bulgaria.com>, 1999, 2000
-# Bozhan Boiadzhiev <bozhan@plov.omega.bg>, 2000
-# Valery Dachev <valery@zonebg.com>, 2000, 2001
-#
-# Bulgarians on Linux use windows-1251 encoding
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-08-15 15:29+0200\n"
-"Last-Translator: Valery Dachev <valery@zonebg.com>\n"
-"Language-Team: Bulgarian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=windows-1251\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "��������� ������������ Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "��������� ���� �� ����� \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "�������� �����"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "�������� �������� �����"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "�������� X ������"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X ������"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "�������� X ������"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X ������"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "��� ��������� �� XFree ������ �� ����� ?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"������� �� ���� �� ��� ��������� �� ��������� 3D ���������, �� ���� � Xfree %"
-"s.\n"
-"������� �� �� �������� �� XFree %s, ����� ���� �� ��� ��-����� ��������� �� "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "������� �� ���� �� ��� ��������� �� ��������� 3D ��������� � XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s � ��������� 3D ���������"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"������� �� ���� �� ��� ��������� �� ��������� 3D ��������� � XFree %s.\n"
-"����������, �� ���� � ��������������� ��������� � ���������� �� ���� �� "
-"�����."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s � ��������������O ��������� 3D ���������"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"������� �� ���� �� ��� ��������� �� ��������� 3D ���������, �� ���� � XFree %"
-"s,\n"
-"����������, �� ���� � ��������������� ��������� � ���� �� ����� ��������� "
-"��.\n"
-"������� �� �� �������� �� XFree %s, ����� ���� �� ��� ��-����� ��������� �� "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (���������� �������� �������)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "��������� �� XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "�������� ��������� �� ������� �� ���������� �� �����"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "�������� ����� �� �������"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "�������� �������"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "�������"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"����� �������� ���������� �� ������������ ������� �� ��������������, ����� "
-"�������� ���������, \n"
-"� ����� ������ ����� �� ������������, � ���-������� - ��������������\n"
-"���������������� �������, ����� �������� ���������, � ����� �� �������� "
-"�������������� �����.\n"
-"\n"
-"����� � ����� �� �������� ������ ������������������ �������, ����� �� "
-"�������� �� ������������� �� ����� ������� - � �������� ������ ������ �� "
-"��������� �������� ��.\n"
-" ��� ����� ������� ��������, �������� ������������� ���������."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "������������ ������� �� ��������������"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "���������� ������� �� ��������������"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "��������� �� � ��������"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "���������� ����� ��� ��� �� � ���������"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "��� �� � ������� ������������ ����������"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "������ �� �� �������� �����������?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"��������: ���������� �� ���� �������� ����� ���� �� \"�������\" ��������� ��"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "�������� �� �����������"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"�������� �� �� ��������� ����� ���������"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "����� �� ������:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "����� �� %d �������"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "����� �� �� ����������� ?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "����� �� ������, �������� �� �� ��������� ����� ���������"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "������������ ����������"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "�������� ������������ ���������� � ��������� �� ���������"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "�������� �����: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 ������: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "���"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "��������� �����"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "������ ������"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "������������ ����������"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "��� ����������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "��� �����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "���������� �� �������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "�������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "������������ ������������� �� ��������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "���������� ����������� �� ��������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "�������� �����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "������������� �� ���������� �����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "�������� �����: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "��������� �� �����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "������������ ����������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 ������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 �������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "���������� �� ����������� �� X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "����� ������ �� ���������?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "��������� ��������"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "��������� ���������� �����"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "��������� ������� �� �������"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "��������� �������������� ����������"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "������ ������������"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "������� ������"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "��������"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"�� ������ �� ��������� ?\n"
-"�������� ��������� �:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ��� ���������� �� ���������"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"K�������� �� ���� �����������, �� ����� � X ��� ����������.\n"
-"������ �� X �� �� ��������, ������ ������������ ���������?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "���� ������ ������ � %s, �� �� ���������� ���������"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "���� ������� �� ������� � ����������� Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ����� (8 ����)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ������ ����� (15 ����)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ������ ����� (16 ����)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ������� ����� (24 ����)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 �������� ����� (32 ����)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 ��"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 �� ��� ������"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 �� 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 �� 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-���������, 1024x768 �� 87 Hz interlaced (���� 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 �� 87 Hz interlaced, 800x600 �� 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 �� 60 Hz, 640x480 �� 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 �� 60 Hz, 800x600 �� 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "�������������� SVGA, 1024x768 �� 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "������������� �������, ����� ������� 1280x1024 �� 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "������������� �������, ����� ������� 1280x1024 �� 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "������������� �������, ����� ������� 1280x1024 �� 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "�������, ����� ������� 1600x1200 �� 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "�������, ����� ������� 1600x1200 �� 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "����� ������ �� ����������� �� ���"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "������� ������ �� ������ (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO ����������"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "���� ������ �� ����������� bootloader-�?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub ����������"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO � �������� ����"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO � �������� ����"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "���������� �� DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "����� �� ����������� ��������"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "���������� ����������� ��������"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Bootloader ����������"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "���������� ����������"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (�� ������ �� ����� BIOS-�)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "���������"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "���������"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "����� �����"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "�������� ����� ������������ �� default ����"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "������"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "������ (������)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "�������� �������, �������� �� ��������� ���"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "��������"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "���������� �� /tmp ��� ����� ���������"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "����� ������ �� RAM-�������, ��� � ���������� (�������� %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "������ ����� �������"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "����� ������� RAM-����� � Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "������� ``�������� ������� �� ��������� ���'' � ���������� ��� ������"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "����, �������� ������"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "�������� �� ��������"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "�������� ���������"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "��������� �� Open Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "��������� �� ���������� �� ������"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "���������� �� CD ?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "���������� �� OF ?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "�� �� ������������ ?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"���� �� ���������� ������.\n"
-"������ �� �������� ��� ��� �� ��������� ��������������."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "������"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "������"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "�����������"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "����� ��� ���������� ������ �� ���������"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "����� �� (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "����� �� (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "����� �� (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "�����"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "������"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "���������"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "������-�����"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "�������"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "������"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "������"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "�� ������������"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-��������"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "��� �������"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "�������� �����"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "������ ������ �� � ��������"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "������ �� ����� swap-���"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "���� ������ ���� �� ��������"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "�������� �� %s %s ����������"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "����� �� ����(�) ?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "����� �� ������� %s ���������?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "��"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "��"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "��� ����������� ����������"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "����������� �� ������� �� %s ������ %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(����� %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "��� %s ������� �� ������� ?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"� ����� ������, %s ��������� �� ������ �� ������������ ����������, ��\n"
-"�� ������ ��������, ������� �� �������� ������ � ��� ���. ������� �� "
-"����������\n"
-"������������ ����� �� ���� ��� �� ��������� �� �������� �� ������� "
-"������������\n"
-"�� ����� �� ������ ? �� ������� ���� ���� �� ����� ��������� ��, �� ���� �� "
-"�� �������."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "����������� ��������"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "����� �����"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"���� ������ �� �������� ������� �� �� ������ %s.\n"
-"������� �� ��� ������ ``���=�������� ���2=��������2 ...''.\n"
-"��������: ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "����� �� ������:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"����������� �� ������ %s �� ����.\n"
-"������ �� �� ������� ������ � ����� ��������� ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(���� �������� %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "���� ������ � ��������� ������"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "����, ������� ������������� ���"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"��������������� ��� ���� �� ������� ���� ����� �����, ������, `-' � `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "���� ������������� ��� � ���� ��������"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "������ ����������"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"�������� ����������\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "������ ����������"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "�������� ���"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "������������� ���"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "���"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "�����"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"���� �� ������� ��������� �� �� ������� � ��������� ����������� ���� ����� "
-"����������.\n"
-"������ �� ���� ���������� ?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "�������� ����������� �� ���������� :"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "�������� Windows Manager �� ����������:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "����, �������� ��������� ����."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "������ �� �������� ����� �����, ����� �� ����� ������ ����������������"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "������"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "�������� �� ����������"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "���������"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "�������� �� �������"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"���� ����� ������ �� ���� �������\n"
-"������� �� ���, �� ������ �� �� ��������� ?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "������"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "����� ����� ��� Cracker-���"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "����"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "����������"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "������"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "������"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "����������"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"���� ���� �� �������� � ��������. ���� ���� ��������� �� ��-����� ��\n"
-"��������, �� � ��-������������: �� ������ �� ���� ���������� �� ������\n"
-"�������� � ����� ��� �� ��������. ���� ������ � ������."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"�������� ���� � ��������, �� ������������ ���� ������ �������� �� � "
-"��������������."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"���� � ������������ ��������� �������������� �� ��������, ����� �� ����\n"
-"��������� �� �� ������� ��� �������� ���� ������. ��� �������� �� "
-"�����������. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"� ���� ���� �� ���������, ���������� �� ��������� ���� ������ ����� "
-"��������.\n"
-"����������� ���� � ���������� ������ �� �� �������� ��������� ����\n"
-"������ ������� ������ �� ����� �������. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"�������� 4-�� ����, �� ��������� � ������� ���������.\n"
-"������ �� ��������� � �� ��������� ��."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "�������� ���� �� ���������"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "���� �� ���������"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "����������� libsafe �� �������"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"����������, ����� ��������� ������ �� a���� � ���������� �� ����� � �������� "
-"���������."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "���� ���������� ����� �� /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "�������"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "�������� ����"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "�� ������ �� ����������� bootloader �� ���� %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "���� �������� ����� ���.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "��������� �� ������ �� ����������"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_�������"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/����/_�����"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<�������>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle ������������� �������"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle �������"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "��������� �������"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "��������� Gtk+ �������"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "����� Aurora ��� ����������"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "����� �� Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "����� �� Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"� ������� ���������� %s ���� �������� �� ����������.\n"
-"������� �� �������, �� �� ���������� ������������� ���������."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "�������"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "�������� �����"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "����� X-Window ��������� ��� ����������"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "��, �� ����� autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "��, ����� autologin � ���� (����������, �������)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "�� ���� �� ������ /etc/inittab �� ������: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "��"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "��"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "��"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "��"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d ������"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 ������"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d �������"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "�� ���� �� ������ ������ ������"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "������ �� �������� ����� �����, ����� �� ����� ������ ����������������"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "�������"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "���������"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "������"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "������"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "��������"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "���"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "����������"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "�������"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "����� �������� backup �� ������ �����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "��������� ���������� !"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"��� ������� �� ���������� aboot, �������� �������� ������������ (2048 "
-"�������\n"
-"�� ����������) � �������� �� �����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "���������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "�������� ��������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"����� ���� ����� FAT ���\n"
-"(�� ������� �� ������� �� Microsoft Dos/Windows).\n"
-"��������� ����� �� ��������� ���������� �� ���� ���\n"
-"(�������� ����� ����, � ���� ���� �������� ����� \"������� ����������\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "����, ������� �� ����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "�����������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "�������� FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "�����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "������ ������� �������:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "���"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "������ ���� ����������� ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "����� ����������� '�����������'"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"���� ������� �� ���� �� ���� %s, ������ ����� ����� ���� �� ����� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "�������� ���"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "�������� ���� ���"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "�����"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "������� � ��������� �����"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "������� � �������� �����"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "�����"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "����������� ������� ������ ?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "����� ��� �����"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "�����, ��� �� ����� �� ��������� �� �������� ?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "������ �� �� �������� ��������� � /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "����������� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "������� ������"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "������������ �� ������� ����"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "������ �������� ������ �� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "�� ���� �� ������ ������ ������"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"��� ������ ��� ������, ���� �������� ����, �� �� ������ �� ��������� ���� "
-"�������� ���"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "������ ��������� � ��������"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "���������� ��������� � ��������"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "��������� ��������� � ��������"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "��������� ��������� � ��������"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "����������� ��������� �� ������� �������"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "�������� ����"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"���������� ������� �� �������� �� � ��� ������ ��������\n"
-"�� �������� �� ��� ��� ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "��������������"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"������� ������� ��� �������\n"
-"������ �����, �������� �� ����� ���������, �� ����� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "������� �� �� ����� ��������� �� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "�������� ����������"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "����� �� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "�����"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "������� ����������"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "��������"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "����������"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "��������"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "������� ��� RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "������� ��� LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "����������"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "�������� �� RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "�������� �� LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "����������� RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "��������� �� loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "������ ��� ���"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "������� ������: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "�������� � MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "��� ������� �������: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "����� �� ���������: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "�������������: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "�� �������� �� loopback ����� ?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "������� ���� �� ����"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "��� ������� ������� ������ ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "������ �� ext2 ��� ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "���� ������ �� ��������� loopback-����� %s ?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "���� ������ �� ��������� ���������� %s ?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"�� ���� �� ����� ������� �� ���������, ��� ���� ����� �� �������� �� "
-"loopback.\n"
-"����� ������� loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "���������� ��������� �� fat ��������� �������"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "������� �� ����������"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "���������� �� ���� �� ���� �� ���� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "������ ����� �� ���� ��� ������ �� ����� ����������"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"���� ������� ���������� �� ���� %s, �����te ����� ���� �� ����� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "�������� ���� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "���� �������� � MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "�� ��� ���� ������ �� �� ���������� ?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "������"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "�� ��� ������ ������ �� �� ����������?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "�������"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "������ ���� ... "
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "�������� ����������� RAID �� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "���"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "�������� ����������� LVM �� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM ��� ?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "���� ��� �� ���� �� ���� ��������� �� loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "��� �� loopback �����: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "����� ��� �� ����"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "������ ���� �� �������� �� ���� loopback, �������� ���� ����."
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "������ ���� ����������. �� �� ��������� �� ?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "����� �� mount:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "��������"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "����������"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "����"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "�������� �� �������"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "��������: ���� �������� � ������"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "����� ��� ��������� �� ������ ?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"���������, �� �� ���� �� ������ �� ������ /boot ������� ������� ����� ����� "
-"(����� �������� > 1024).\n"
-"��� ���������� LILO � �� �� ������, ��� �� ���������� LILO � ������ ����� "
-"�� /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"�����, ����� ��� ��������� �� root (/) � ��������� ���������� �����\n"
-"1024-�� �������� �� ������� ���� � ������ /boot ���.\n"
-"��� ������� �� ���������� boot ��������� LILO, ������ ���������� ���\n"
-"����������� �� /boot ���"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"��������� ��� ��������� RAID ��� ���� root (/).\n"
-"���� ��������� ��������, ����� �� ���� �� �� ������ � ���� ��� /boot ���.\n"
-"���� �� �������� /boot ���"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "��������� �� �������� �� ���������� %s �� ���� �������� ����� ����� !"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "������ �� ������������, ����� ��������� �� ������ � ����"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "���� ����������� �� ���� %s, ������ ����� ����� ���� �� ����� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "�����������"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "����������� �� loopback ����� %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "����������� �� ���� %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "����� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "�������� ��������� �� ��� ���"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"������������ %s ���� ������� ������� �����\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "�������� ��������� �� ��� ���"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "�������� �� %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "��������� �� %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "����������: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "����� �� ������������ ��� DOS: %s (������ �������������)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "���: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "���: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "������: ������ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "������: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s �������"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "�� �������� %d �� �������� %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "����������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "������������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "��������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback ����(���):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"���, ����� �� �������� �� ������������\n"
-"    (�� MS-DOS boot, �� �� lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "���� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "������ �� ������� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-������� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "��� �� loopback �����: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"�������� � ���� ��� �� �\n"
-"�������-���, ���� �� ������\n"
-"������ �� �� ��������.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"���� ��������� ����������\n"
-"����� �� ���� � �� ������\n"
-"���������� �� ��������� ��.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "������: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "���������: %s ��������, %s �����, %s �������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "����������: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-������� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "��� �� ��������� � ������: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "�� ���� %d ����� %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "�����: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "��� ������� �������: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "�������� � ��������� ������ (������ �� ���� ����� ���� %d �������)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "�������� �� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "������� ����"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "����, ������� �� ��������"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS ������"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ����������� �� %s ���������"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "�� ���� ��� �� ���������� %s � ��� %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck ������ � ������� ��� %d ��� ������ %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "������ ��� ������������� �� %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "�����"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "������"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "�� ������ �� ���������� JFS �� ��� ��-����� �� 16 ��"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "�� ������ �� ����������� ReiserFS �� ��� ��-����� �� 32 ��"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "������� �� ��������� ������ �� �������� � /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "���� ��� ��� � ���� ����� �� ��������� %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "�� ������ �� ���������� LVM ��������� ��� �� ����� �� ��������� %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "���� ���������� ������ �� ������ � ������� �� root ��������� �������."
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"�������� �� �� �������� ������� ������� (ext2, reiserfs) �� ���� ����� �� "
-"���������\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "�� ������ �� ���������� LVM ��������� ��� �� ����� �� ��������� %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "���� ���������� ����� �� ����������� �������"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "������ ��� �������� �� %s �� �����: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"����� �� ������ - �� �� ������� ������� ����������, ����� ����� �� ����� "
-"��������� ���� ������� �������. ���� ��������� ������� �� ���� �� �� "
-"��������� �� ���� �������"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "������ ������� ������!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux � ������������������ �������, ����� ��������, �� ����� ���������� "
-"����\n"
-"�� ��� ���� �������������, ������� � �.�.. ������ �� ��������� ������������ "
-"��\n"
-"�����������, �� �� ������� ������.\n"
-"�� ������� �� Root, ����� � ���������������, �������������, ����� �� "
-"�������� ���\n"
-"���� �� ����� �� �������� ���� ����� ����������� �� ������� � ������� "
-"���������.\n"
-"�� ������ �� ��������� ���� ���� ��������� ���������� �� ���� ��.\n"
-"� ���� ������ �� ������ �� ������� �� ������� �������. ������� ���� "
-"����������\n"
-"�� ������� ���� root ���������, ���� �� ���� ����� ������ ! � ���-"
-"�������������\n"
-"���� �� ��������, �� ��������� �� ���� �� ������ ������. ��� ��������� ����� "
-"��������\n"
-"������ ���� ����������, ���� ���� �� �� ������ �� ������ �� ���� �� "
-"������������,\n"
-"�� �� � �� ������ �������.\n"
-"\n"
-"�����, ������ �� �� �������� �����. ���� �� � ������������, ������� ��, "
-"��������\n"
-"������ �� �������� ������� � �� �. DrakX ���� ���� �� ������ ������� "
-"��������\n"
-"� ��������� ���� � �� �� ������ ���� ������������� ���. ���� � �����, � "
-"�����\n"
-"�������� ������������ ���������� �� ����� � ���������. ������ �� �� "
-"���������.\n"
-"������ �� �������� � ������ ���. �������� �� ���������������� (���������) "
-"����������\n"
-"�� � ������� ������� ���� ���� �� Root �� ������ ����� �� �����������, �� "
-"���\n"
-"��� ���� ������� �� � �����������, ��� ���� ��������� ��������� ��.\n"
-"\n"
-"���� ���� ������� �� \"������ ����������\", ������ �� �������� ������� �� "
-"������.\n"
-"�������� �� ���� ���������� �� ����� �� ���������� ��: ���� ��, ������ ��, "
-"��������.\n"
-"������ ��� �������� ������ �����������, ����� ������, ������� ������.\n"
-"\n"
-"������� �� ������ \"�����������\", �� �� ��������� ��������� �� ������������ "
-"��\n"
-"����������� (bash �� ������������)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"��-���� �� �������� ���������� Linux ������ ������������\n"
-"�� ������� �� ����. ������ �� �������� ������ �������� �� ����������, �� ��\n"
-"����� �� ���� ��������. ��� �� ���������, ������ �� ���� �� ����������\n"
-"root ��� (\"/\"). �� ��������� ��������� ����� ������, ������ ���� �� "
-"������\n"
-"�� ����������� ���������� �������. ��� ������ �� ����������� ������� �� ��\n"
-"������� ���, ������ �� �������� \"/home\" (�������� � ����, ��� ����� "
-"������\n"
-"�� ���� Linux ���).\n"
-"\n"
-"\n"
-"�� ����������, ����� ��� � �������, ����� ������: \"���\", \"���������\".\n"
-"\n"
-"\n"
-"\"�����\" �� ������ ����� ������: \"��� �� �����\", \"����� �� �����\",\n"
-"\"����� �� ���\" (��������, \"hda1\").\n"
-"\n"
-"\n"
-"\"����� �� �����\" ���� �� � \"hd\", ��� � IDE ����� ����, ��� \"sd\", ��� "
-"�\n"
-"SCSI ����� ����.\n"
-"\n"
-"\n"
-"\"������� �� �����\" ������ � ������� ���� \"hd\" ��� \"sd\". ��� IDE "
-"�������:\n"
-"\n"
-"   * \"a\" �������� \"master ���� �� ������ IDE ���������\",\n"
-"   * \"b\" �������� \"slave ���� �� ������ IDE ���������\",\n"
-"   * \"c\" �������� \"master ���� �� ������ IDE ���������\",\n"
-"   * \"d\" �������� \"slave ���� �� ������ IDE ���������\".\n"
-"\n"
-"\n"
-"��� SCSI ����������, \"a\" �������� \"����� ����� ����\", \"b\" �������� "
-"\"����� ����� ����\" � �.�.."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"������������ �� Mandrake Linux � ����������� �� ������� CDROM-�. DrakX\n"
-"���� ���� ������ ����� �� �� ������ �� ���� CDROM ��� �� ������ ��������\n"
-"CD � �� �� ������ �� ������� ����, �� ����� ��� �����."
-
-#: ../../help.pm_.c:77
-#, fuzzy
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"���� � �������� �� ���������� ��� �������� ������ �� ����� ����������� ��\n"
-"��������� ��. � Mandrake Linux ������������� ��� ������ ������, �� �� �\n"
-"������������ �� �� ������ �������.\n"
-"\n"
-"��� ���������� ���������� ��������� �� CDROM, ����� �� ������ �������� ���\n"
-"CD-�� ����� (� ��������� �����). ��������� ���������� �� CD-���� � ��������\n"
-"��������� ������������� �� CD-����, � ����� �����������. ������� \"OK\",\n"
-"������ ��� ������ �� ����������.\n"
-"\n"
-"�������� �� ��������� � ����� ������������� �� ������������� �������� ��\n"
-"�������� ��. �������, ���� �� ���� ��, �� ��������� � ������ ������:\n"
-"\n"
-" * \"������� �������\": ��� ������� �� ���������� �������� �� ���� ������� "
-"�������,\n"
-"�������� ���� ��� ������ ����������� �����.\n"
-"\n"
-" * \"����������\": ��� �������� �� �� ���� ���������� �� ������������, "
-"��������\n"
-"��������(���) �����(�).\n"
-"\n"
-" * \"������\": ������, ��� �������� �� �� ���� ���������� �� ������, ��\n"
-"������ �� �������� ��� �� ���-����� ������������ ������ ������ �� �����\n"
-"����������� �� ��������.\n"
-"\n"
-" * \"�������� �����\": ��� ������ �� �������� �������������� �������� "
-"�����.\n"
-"���� ���� ������ �� ���� �������, ��� ������ �� ����� �������� ����� !\n"
-"\n"
-"������������ ������� �� ������� ��� ����� �� �������, �� ������ ������\n"
-"������������� ����� �� ���.\n"
-"\n"
-"������ �� ������� ��������� \"������������ ����� �� ������\", ����� � "
-"�������,\n"
-"��� ��� ��������� � ��������, ����� �� �� ����� ���������� ��� ��� ������ "
-"��\n"
-"����� ����� ������� ��� ����, ����� �� ���� �����������.\n"
-"\n"
-"��� ��� ��������� ������������ � ����� �� \"����������\", ������ �� "
-"���������\n"
-"������ �����, �� �� ��������� ������������� �� ���� ������. ���� � �������\n"
-"��� �������� ��� ���������� �� �������������� �������."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"������, � ���������� �� ������ �� ���� �� �������� ������ ���� �� ����, ��\n"
-"�� ���� ����������� ����� ��������� ������ ������ ��������� �� ����� �\n"
-"���������. ������ ��������� �������, ������ �� �������� ���� �����, "
-"��������\n"
-"��� ������� ������.\n"
-"\n"
-"������ �������� ����� �� �������, �� �� ����� �������� ������. ������\n"
-"������� � ���������, ������� ������ \"����������\", ����� �� ����� �������\n"
-"�� ����������. � ���������� �� ��������� �� �������� �� � ���� �� ��������,\n"
-"����� ������ �� ����� �����������, �������� ���� �� ������ �������� �����.\n"
-"���������� ����� �� ����������� �� �������, �� ���� �������� �� ������, ��\n"
-"�� �� ������� �� ��������� ���� ����� ���������� ����� �� �� ��������� ��\n"
-"���� ����.\n"
-"\n"
-"!! ��� � ������ �������� �����, ���� �� �������� ��� ������ � ���� �� ����\n"
-"�����, �� ������ �������� �� ������������, �� �������� ������ ���� ������\n"
-"�� ���� ����������. � Mandrake Linux, ������ ������� ������� �� "
-"������������\n"
-"��� ���������.���� ��� �� ������� � ����� �������� ��������, ������\n"
-"������������� �� ��������������, ���� �� �� ����� ����, �� �� �� ������\n"
-"����� � �����������, ���� ���� �������� �� Mandrake Linux � ���������. ���\n"
-"�� ������ �� ����� ����� ���������� ������ ��� ���� � �����������, �������\n"
-"\"��\". � ������ �� \"��\"  �� ����������� �������� ������ � �� �� �����\n"
-"���������� ����������� �� ������������. !!\n"
-"\n"
-"������� \"����������� �����������\" �������� ����������������� �������,\n"
-"������ ������������ ���������� ���� ������ �����. ���� �� ������, ������\n"
-"� �����, �� �� ������ �� �������� ���������� � ���� �����, �� �� ��������\n"
-"������� ������������.\n"
-"\n"
-"������� ������ �� �������� � ������ �� ������� ��������� �� �������� ������\n"
-"� ������ �� �������� ����������. ��� ������� �� ���� ������, �� ������\n"
-"�������� �� ������� ������� ��������� ����� ���� � ���� �� ����� "
-"����������.\n"
-"����� ������� ��������� �� ����� �� ���������� ������, �� ���� ��� ��\n"
-"��������� ������ �������."
-
-#: ../../help.pm_.c:164
-#, fuzzy
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"��� ������ �� �������� ��������� �� ��� �������� ��� ��� ������� �����, "
-"����\n"
-"�������� ����������� �����. ����, �������� ������������ �� ����� �� "
-"��������\n"
-"�������, �� �� ������ ���������� �� DrakX �� �� ������.\n"
-"\n"
-"Mandrake Linux �������� ����������� �� �������� �������� �� ����� ��\n"
-"����������. ���������� ������: ��������� �����, ISDN �����, ADSL ������,\n"
-"������� ����� � ������ ���������� LAN ������ (Ethernet).\n"
-"\n"
-"��� ���� �������� �� ����������� ����� ���������. ������ ������ �������, ��\n"
-"����� ���������� ����� �� �������� ���������� �� ��� ���������\n"
-"�������������.\n"
-"\n"
-"������ �� �� ������������ � ������� � ������������� �� �������� �������� ��\n"
-"����������� �� ����������� ��� ������ ��������� ��������� �� �� ����\n"
-"����������� � ����������� ���������� ������� ���, �� �� ��������� ��������.\n"
-"\n"
-"��� ������ �� ��������� ������� ��-����� ���� ���������� ��� ��� ��� "
-"��������\n"
-"� ����������� �� �������, ������� \"�����\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"���� ������ �� �������� ��� ������ �� �� ������ ��� ����������.\n"
-"\n"
-"��� �� ����������� ������ ������, �������� � ���������� ����������.\n"
-"����������� �� ���������� � ��������� ����, ����� �� �� ������� ������ ��� "
-"����������.\n"
-"\n"
-"������ ������ ������ ����������� ����� �� ��������, ���� ��������� ������ �� "
-"������� ��\n"
-"��� ����� �� ��������. ��� �� ��� �������, ���� �������� � ������� ��� ��, "
-"��-�����\n"
-"� �� �������� ������ �� ������������.\n"
-"\n"
-"���������� � ���� ������, ��� ������� �� ���������� �������� �� ���� "
-"������:\n"
-"������� �� ����� ������ �� ������� ������, �� ����� �� �� ��������. ����,\n"
-"���������, �� ����� ������ ����� �� ����� ������, ��� �� �������� �� "
-"�������.\n"
-"�� �������, ��������� ���� ��������, �� ����� �������� �� ��������."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-#, fuzzy
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (�� X Window System) � ������� �� GNU/Linux ��������� ���������, �� �����\n"
-"�� ������� ���������� ����� (KDE, Gnome, AfterStep, WindowMaker...) "
-"��������\n"
-"� Mandrake Linux. � ���� ������, DrakX �� �� ����������� �� ������� X.\n"
-"\n"
-"������������ ����� �� ������ �� �� �������, ����� ��� ��������� �� � �����\n"
-"���� (��� ��������� ���). ��� �����, �� �������� X ����������� � ���-"
-"�������\n"
-"������������ ���������� � ���������� �� ���������� �� �������� ��. �� ��\n"
-"����� ��������, �� �� �� ������ ���� �� �������.\n"
-"\n"
-"��� ���������� \"���������\" ����������, �� ������ �������� � ���������� ��\n"
-"��������� �� X. ����� ����������� ������ �� ������������� �� ������\n"
-"���������� �� ����������.\n"
-"\n"
-"��� ������ �����������, ��������� \"��\", ���� ����� DrakX �� �������� ���\n"
-"���������� ������. ��� �� ������ �����������, ���� ��������, �� �����������\n"
-"� �������� � ������ ����������� �� ���� ��������� ���� 10 �������,\n"
-"��������������� ������."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"������ ���, ������ ������� ����������� �� X, ���� �� ���� �� ��� ������� ��\n"
-"�� ���� (������� � ��������� �����, �������� ������ ��� �������...). "
-"�������\n"
-"����, ���� ��� X ������ ���� ������, DrakX �� �� ������ ���� ����������� ��\n"
-"������. ���� ����, �� �� �������� �������, ���� ������ ������ �� �������\n"
-"������, ����� � ����� �� ������, � ����� �� �������� ����.\n"
-"\n"
-"���� �������� ����������, ��� ��� ��� �� ������ �� ��������� X, ��������\n"
-"\"������� �� ���������� �����\", �������� \"���������� �����\", �, ������\n"
-"������ �������� ��� ������ �� ���� ���������, �������� \"FBDev\". ���� �\n"
-"��������� �����, ����� ������ �� ����� ��-���� �����. ������ �������� "
-"\"������ ���\", �� �� ��� �������."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"������, �� ������ �������� ���� ������ �� ������� ��������� ��������� ���\n"
-"���������. ����������, �� ���� ������ �� �� ���� ������� ���� ��� ��������,\n"
-"�� �� �������� �����������. ��������, ����� ���������� � \"��\", ��� "
-"��������\n"
-"�� ������ ���� ������ ��� ��� ���� ������� �������� �������."
-
-#: ../../help.pm_.c:256
-#, fuzzy
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CDROM-�� ��� ������� ���������� �����. ������ �� ��\n"
-"����������, ���� ���������� �� CDROM-�, ��������� ������� >>F1<< � ��������\n"
-">>rescue<<. �� ������, �� ���������� �� ���� �� �������� �� CDROM, �� "
-"������\n"
-"�� �� ������� ��� ���� ������ �� ����� � ���� ��� ��������:\n"
-"\n"
-" * ������ ����������� boot loader, DrakX �� ��������� ��������� ������ (MBR) "
-"�� ������� �� ���� (����� ��� �� ���������� ���� ������� ��������), ���� ��\n"
-"�� ���������� Windows ��� GNU/Linux (��� ����� Windows � ��������� ��). ���\n"
-"�� �������� �� �������������� Windows, �������������� ������ �� Microsoft\n"
-"�� ��������� ��������� ������ � ���� �� ������ �� ������� ����� GNU/Linux!\n"
-"\n"
-" * ��� �� ����� ������� � �� ������ �� ������� GNU/Linux �� ������� �� "
-"����,\n"
-"���� ������� �� ��� �� ��� ���� �� �������� GNU/Linux. �� ������� "
-"�������������\n"
-"���� �������� ����������� �� �������������� �� �������, ����� � ������ ����\n"
-"���� � ������������, �������� ������, ������ � �������� ��� ������� �����\n"
-"�������.\n"
-"\n"
-"������ ������� �� ���� ������, �� ������ �������� �� ��������� ���� �\n"
-"������������. ���������, ����� �������, ������ �� ���� ������ ��� �� "
-"�������\n"
-"�����, �� ����� �� �� ��������. ���� ����� �� � �����������, ��� ���� DrakX\n"
-"�� ��������� ������ �������."
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"� ���� ������ ������ �������� ���� �� ������� �� ����� �� ����������� "
-"������\n"
-"Mandrake Linux ����������� �������. ��� �������� �� ���� � ������ ��� �����\n"
-"����������� ������� �������� ������ ������������, �� ������ �� �� "
-"���������.\n"
-"������ ���������, ����������� �� ������� ���� �� ������ � ��������� "
-"���������\n"
-"��� �� �� ������� ����� �� ���������� �� ������ Mandrake Linux �������.\n"
-"\n"
-"��� ���� �������� �� ��������� ���������� � ���������, ����������� ���� ��\n"
-"�������� ������ � ��������, ��� ��� �������� ����������. ����� ����, ���\n"
-"���������, ����� ��������� ���� ������. ����� �� ���������, ������������� "
-"��\n"
-"� ������������� � �� ��������.\n"
-"\n"
-"��� ������� ������������ � ��������� �����, �� ������ �������� � DiskDrake,\n"
-"���������� ���������� �� Mandrake Linux, ����� �� ��������� �� �����������\n"
-"�������� ��. ����� ������� DiskDrake �� �������������. �� ��������������\n"
-"��������� ������ �� ���������� ������������, ���� ��������� ������\n"
-"\"���������\" �� �������.\n"
-"\n"
-"��� �������� �� ���� ����������, ���� �� �������� ���������� ��� �� ����\n"
-"��������� �� ���������, ������ �������� �� ��� �� ����������� Linux\n"
-"���������.\n"
-"\n"
-"��� �������� �� �� ����������, �� ������ �� ��������� ������ �����������\n"
-"����������. � ���������� �� ����������� �� ������� ����, �� �������� "
-"�������\n"
-"�����:\n"
-"\n"
-" * \"��������� ���������� ������������\": ���� ����� ������ �� ������ ��\n"
-"����������� �������� �� �������� ������������ �� ������� �� ����. ���� ��\n"
-"������ ������ �� ����.\n"
-"\n"
-" * \"��������� ����������� ���\": ����������� � ������� ���� ��� ������\n"
-"������������ Linux ������ �� ������� �� ����. ��� ������ �� �� ����������,\n"
-"�������� ���� �����.\n"
-"\n"
-" * \"��������� ���������� ������������ �� Windows ���\": ��� ����� "
-"����������\n"
-"Microsoft Windows �� ������� �� ���� � ��� ����� ������ ��������\n"
-"������������ �� ����, ������ �� ���������� ����� �� Linux �����. �� ��\n"
-"�������������, ������ �� �������� Microsoft Windows ���� � ������� (�����\n"
-"��������� \"������ ����� ����\" ��� \"�������� �����\") ��� �� ���������\n"
-"���������� �� Microsoft Windows ����. ��������� �� ���������� ���� �� ����\n"
-"��������� ��� ������ �� �����. ���� ������� �� ����������, ��� ������\n"
-"������������ Mandrake Linux � Microsoft Windows �� ���� � ���� ��������.\n"
-"\n"
-"   ����� �� �������� ���� �����, ����, ���������, �� ���� ���� ���������,\n"
-"���������� �� Microsoft Windows ���� �� ���� ��-�����, ��������� ����� "
-"����.\n"
-"�� ����� ��-����� ����� ��� Microsoft Windows �� ����������� �� ����� ��� "
-"��\n"
-"��������� �� ��� �������.\n"
-"\n"
-" * \"������ ����� ����\": ��� ������ �� �������� ������ ����� � ������, "
-"�����\n"
-"����������� �� ����� ����� ���� � �� �� �������� � ������ Mandrake Linux\n"
-"�������, �������� ���� �����. ������ ���������� � ���� �������, ������ ����\n"
-"�� ������ �� ������� ������� ������ ��, ���� ���� ����������.\n"
-"\n"
-"   !! ��� �������� ���� �����, ������ ����� �� ����� �� �� ����� "
-"�������� !!\n"
-"\n"
-" * \"������ Windows\": ���� ������ �� ������ ������ �� ����� � �� ������� "
-"��\n"
-"�����, ��������� �� ���. �������� ����� �� ����� �� �� ����� ��������.\n"
-"\n"
-"   !! ��� �������� ���� �����, ������ ����� �� ����� �� �� ����� "
-"�������� !!\n"
-"\n"
-" * \"��������� �����\": �������� ���� �����, ��� ������ ����� �� ���������\n"
-"������� �� ����. ������ ���������� - ���� � �����, �� ������ �����. ������\n"
-"����� ����� �� �������� ������ �����. ���� �� �� ��������� ����, ��� ��\n"
-"������ ����� �������."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"� ���� ! ������������ � ��������� � GNU/Linux ��������� �� � ������ ��\n"
-"��������. ������ ������� \"OK\", �� �� ������������ ���������. ������ ��\n"
-"���������� GNU/Linux ��� Windows, ����� ������������ (��� ����� ��� "
-"�������),\n"
-"������� ���� ���� ���������� �������� ������.\n"
-"\n"
-"������ \"�����������\" (���� � \"���������\") ������� ��� ��� ������ ��:\n"
-"\n"
-" * \"���������� �� ������� �� ����������� ����������\": �� �� ���������\n"
-"������������� �������, ����� ���� ���� ����������� �� �������� ������\n"
-"���������� ��� ������� �� ��������, ��������� �� ������������, ����� ����-"
-"��\n"
-"��� ���������.\n"
-"\n"
-"   ����������, �� ��� �������� ����� �� �������, ���� ������ �� ������:\n"
-"\n"
-"    * \"��������\". ���� � �������� �������������� ���������� ���� ��������\n"
-"�� ��������� �� ������ ������� ������������.\n"
-"\n"
-"    * \"�����������\". ������� ����������� ����������: �������� ���� ��\n"
-"���������� �������, �������� ����� �� ��������.\n"
-"\n"
-"   ���� ��������� � ����� ������, ������ ����������� ����� ���� �������\n"
-"������. ����� �������� �� ����������� ���������� �� ����� web-����.\n"
-"\n"
-"    * \"������ ������ �� ������\"(*): ������� ������ �� ������, ���� ����� "
-"�\n"
-"�������� �����. ������ ������� ����� ����������, �������� ��������� �\n"
-"������������ � ������� ������������ �� ����� ���� �������� �����, ����\n"
-"��������� ������� [F1] � ���� �������� >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) ������ �� FAT-����������� ������� (�� �� ��������� ����� ��� GNU/Linux,\n"
-"�������� \"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"������ �������������� ������ ������ �� ����� �����������, �� �� �� "
-"���������\n"
-"(����������� �������� ��������� �� ������� �������).\n"
-"\n"
-"� ���� ������� ���� �� ������ �� �������������� ����� ������������ ������, "
-"��\n"
-"�� �������� �������� �����, ����� ��������. ��� ������ �� �� ���������, "
-"����\n"
-"�������� ���.\n"
-"\n"
-"����, ����������, �� �� � ���������� �� �������������� ������ ������\n"
-"������������ �������. ������ �� �������������� �������� ���������\n"
-"������������� ������� (���� \"/\", \"/usr\" ��� \"/var\"), �� ���� �� �\n"
-"������������ �� ������ ��������� �����, ����� ������ �� �������� "
-"(����������\n"
-"\"/home\").\n"
-"\n"
-"����, ������ ����������, ������ �������� ��������. ���� ����������� ������\n"
-"����� �� ���������� ������ �� ����� ������� � ���� �� ������ �� ��\n"
-"������������.\n"
-"\n"
-"������� \"OK\", ������ ��� ������ �� ����������� ������.\n"
-"\n"
-"������� \"�����\", ��� ������ �� �������� ����� ������ �� ���������� �� "
-"������\n"
-"�� Mandrake Linux ����������� �������.\n"
-"\n"
-"������� \"�����������\", ��� ������ �� �������� ������, ����� �� �����\n"
-"��������� �� ���� ������� �� �����."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"������ �� Mandrake Linux ����������� ������� � ������� �� ���������. ����\n"
-"�������� �� �������� �� ������ ������� ������ (������ �� ��������� �������� "
-"��\n"
-"������������ � �� ��������� �� ��������� ��).\n"
-"\n"
-"����, ������ ���������."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"����� �� ����������, ������ ���������� �� ��������� ��������� �� �������. "
-"���\n"
-"������� ������ Mandrake Linux �����������, �, ��� �� ��� �������� � ������ "
-"�������\n"
-"� ����, ������� �� ������ �����. ���� ��������� �� �������� ������������. �� "
-"��\n"
-"���������� � ������������, ������� �� ������ ������."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"� ���� ������, ������ �� �������� ������ �� ���������, ����� ������ ��\n"
-"��������. �� �������, ������� ������ �������� �� � �������� � ������� "
-"������\n"
-"����� �� ���������� �� ���, ������� ��-������ ������ �� � ������ �� "
-"���������.\n"
-"������� ����, �������� ��������� � �� ������ �� �������� �� ������.\n"
-"�������� �� ��� ������� MSEC �� Reference Manual, �� �� �������� ������ "
-"����������\n"
-"�� ���������� �� ���� ����.\n"
-"\n"
-"��� �� ������ ����� �� ��������, �������� ������� �� ������������."
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"� ���� ������ ������ �� �������� ��� ������ �� ����� ���������� �� "
-"����������\n"
-"�� ������ Mandrake Linux �������. ��� �������� ���� �� ����������, ���� ��\n"
-"�������� ���������� �� GNU/Linux ��� �� ���� ���������� �� ���������, "
-"������\n"
-"�� ���������� �������������� ������. � �������� ������ ������ �� ����������\n"
-"������ �� ������� ����.\n"
-"\n"
-"�� �� ��������� ������, ������ ����� �� �������� ����� ����. ������ ��\n"
-"�������� ���� �� ���������, ���� ������� �� \"hda\" �� ����� IDE "
-"����������,\n"
-"\"hdb\" �� �������, \"sda\" �� ����� SCSI ���������� � �.�..\n"
-"\n"
-"�� �� ��������� �������� ���� ����, ������ �� ���������� ������� �����:\n"
-"\n"
-" * \"������� ������\": ���� ����� ������� ������ ������ �� �������� ����.\n"
-"\n"
-" * \"����������� ���������\": ���� ����� ��������� ����������� �� ��������\n"
-"Ext2 � swap ������ � ���������� ������������ �� ������� �� ����.\n"
-"\n"
-" * \"����� ��������� � ������\": ��� ��������� � ������ � ���������, ������\n"
-"�� �� ������� �� � ������������ � ���� �����. ����, ������ ���������� �\n"
-"�������, �� ���� �� �� �����.\n"
-"\n"
-" * \"�����\": ����������� ���� �����, �� �� �������� ���������.\n"
-"\n"
-" * \"���������\": ������ �� ���������� ���� �����, ��� ������ �� �������\n"
-"������ ������� � �� �������� �������������� ������� � ������.\n"
-"\n"
-" * \"���������\": ����������� ���� �����, ��� ������ �� ���������� "
-"���������,\n"
-"�� ������� ������� �� ����. ���� �� ����������, ��� ������ ���������� "
-"��������\n"
-"�� �����������.\n"
-"\n"
-" * \"���������� �� �������\": ���� ����� �� �� ������� �� ������������ "
-"��������\n"
-"����� ���� �� ������� ������� � ������.\n"
-"\n"
-" * \"������ �� �������\": ������� ��������� � ������ �� �������. ������� � "
-"���\n"
-"���������� �������������� �� ��������� ��� ������������. ����� �� "
-"����������\n"
-"�� ��������� ����.\n"
-"\n"
-" * \"������\": ������ ��� �������� � ����������� �� ������� �� ����, ���� "
-"��\n"
-"������ ��������� ����� �����.\n"
-"\n"
-"����������: ������ �� ���������� ����� ����� ����������� ������������.\n"
-"��������� ���� �������� ����������� [Tab} � ��������� ������/������.\n"
-"\n"
-"������ � ������ ���, ������ �� ����������:\n"
-"\n"
-" * Ctrl-c, �� �� ��������� ��� ��� (��� � ������ ������ ���);\n"
-"\n"
-" * Ctrl-d, �� �� �������� ���;\n"
-"\n"
-" * Ctrl-m, �� �� ���������� ����� �� ���������.\n"
-"\n"
-"��� ��������� �� PPC ������, ������� �� ������ �� ��������� ����� HFS\n"
-"\"bootstrap\" ��� �� ���� 1 ��, ����� �� ���� ��������� �� boot loader-��\n"
-"yaboot. ��� ������� �� ��������� ���� ��-�����, �������� 50 ��, ������ �� "
-"��\n"
-"�������� �� ������� �����, ������ �� ����������� ����� ���� ��� image ��\n"
-"ramdisk � ������ �� ���������� ��������."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"���� ������� ������ �� ���� Microsoft Windows ���\n"
-"�� ������� �� �����. �������� ����, ����� ������� ������ �� ���������, �� "
-"��\n"
-"����������� Mandrake Linux ����������� �������.\n"
-"\n"
-"\n"
-"�� ����������, ����� ��� � ������� ����� ������: \"Linux ���\", \"Windows ���"
-"\", \"���������\".\n"
-"\n"
-"\"Linux �����\" �� ������ ����� ������: \"��� �� �����\", \"����� �� �����"
-"\",\n"
-"\"����� �� ���\" (��������, \"hda1\").\n"
-"\n"
-"\n"
-"\"����� �� �����\" ���� �� � \"hd\", ��� � IDE ����� ����, ��� \"sd\", ��� "
-"�\n"
-"SCSI ����� ����.\n"
-"\n"
-"\n"
-"\"������� �� �����\" ������ � ������� ���� \"hd\" ��� \"sd\". ��� IDE "
-"�������:\n"
-"\n"
-"   * \"a\" �������� \"master ���� �� ������ IDE ���������\",\n"
-"   * \"b\" �������� \"slave ���� �� ������ IDE ���������\",\n"
-"   * \"c\" �������� \"master ���� �� ������ IDE ���������\",\n"
-"   * \"d\" �������� \"slave ���� �� ������ IDE ���������\".\n"
-"\n"
-"\n"
-"��� SCSI ����������, \"a\" �������� \"����� ����� ����\", \"b\" �������� "
-"\"����� ����� ����\" � �.�..\n"
-"\n"
-"\"Windows �����\" � ������� �� ������� �� ���� ��� Windows (������� ���� "
-"���\n"
-"��� �� ������ \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "����, ������ ���������. ���� �������� ���� �� ������ ������� ������."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX ���� ������ �� ������� ���������� �� ������������ (\"��������������"
-"\")\n"
-"��� ������, ������ ����� ��-����� ������� (\"���������\"). ��� ���� ����\n"
-"������ �� �������� �� ��������� ���� ���������� ��� ����������� ��\n"
-"������������ Mandrake Linux �������. ������� �� \"����������\" �� ������\n"
-"������� ������� �������. �������� \"��������\", ��� ����������� ���\n"
-"��������� ������������ �������\n"
-"\n"
-"����, �������� \"����������\", ��� ������ ����������� �������� ����� ��\n"
-"Mandrake Linux ��� ��� ������ �� �������� ����� ����������� �������.\n"
-"\n"
-"����, �������� \"��������\", ��� ������ �� ���������� ��� ��������� ����\n"
-"����������� ������ �� Mandrake Linux.\n"
-"\n"
-"� ���������� �� ���������� �� �� GNU/Linux, ����, �������� ���� �� ��������\n"
-"������ ����������/����������� �� ������ Mandrake Linux ���������� �������:\n"
-"\n"
-" * ��������������: �������� ����, ��� ������ �� ��� ����������� GNU/Linux\n"
-"����������� �������. ������������ � ����� ����� � �� ������ �������� ����\n"
-"������� �������.\n"
-"\n"
-" * ���������:��� ����� ����� �������� �� GNU/Linux, ������ �� �������� ����\n"
-"������������� ����. ����������� ���������� �� �� ������� �� ��������� �����\n"
-"������������� ����������. ���������� �� ����� ������� ���� �� �� �����, ���\n"
-"�� ��������� ����� GNU/Linux, ���� �� �������� ����, ����� ��� �� ������\n"
-"����� �������."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"����������, DrakX �� �������� �� ������ ���������� �� ��� ���������� (� "
-"����������\n"
-"�� �����, ����� ��� �������) � ���� �� �� ������ �� ������ ���� ������. "
-"����� ���� ��\n"
-"������ ���������� ������������� ����� �� ����� ����: ��������, ��� ��� "
-"������������ ����,\n"
-"���� �� �� ������ ������������ �� �� ���� �������. ��� ��� �������� "
-"a��������, �� ���\n"
-"� ������, ���� �� �� ��� � ������ ��������. � � ����� ������, �� ������ �� "
-"�� �������\n"
-"��� ���� ������������� ������ � �� �������� ���������� ���������� �� "
-"�������.\n"
-"\n"
-"������, ����� ������ �� ���������, � �� �������� �������������� ����������� "
-"�������\n"
-"�� �������, ����� �� �� ����� ���� ���.\n"
-"\n"
-"��� ����� ���������� �� ���� �������� �� ���� ��������� �� ������������, "
-"�������\n"
-"�� ������ \"�����������\". �� �� ���� ����������� ����� ������ � "
-"������������ ����������."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"����, ������� �� ������������� ���� �� ���������� � �������� ��������.\n"
-"\n"
-"�������� �� ������ \"�����������\" �� �� ������� �� �������� ����� �����\n"
-"�� ����� ����������� �� ��������� �� �������. ���������� �� ����� �����\n"
-"�� ��������� ������� ���������� �� ������� �� �������� ������������ �\n"
-"����������. ��������, ��� ����� ����������� �� ������� �� �������� ��,\n"
-"�������� ��������� ���� ������ ���� � ������������ ����� � � ������\n"
-"\"�����������\" ������� �� ������ ������ ������������� ��\n"
-"\"��������|�������\".\n"
-"����������, �� ����� �� ����� ����������� ������� �����. ������ ������\n"
-"������� �����, ������� ������ \"OK\", �� �� ����������."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"�� ������������, DrakX ���������� �� ����� ���������� ����� � �� ������\n"
-"���������� �� ��� ������. DrakX ����������� ������� ���� � PS/2, ������� "
-"���\n"
-"USB �����.\n"
-"\n"
-"��� ������ �� ���������� ���� ��� �� �������, �������� �������� �� �������,\n"
-"����� �� �� ���� ����������.\n"
-"\n"
-"��� �������� ����� �������� �� ���� �� ������������, �� �� ���� �����������\n"
-"����� �� �����. ����������� �������� � ���������, �� �� ���������, ��\n"
-"����������� � ����. ��� ������� �� ������, ����� ������, ��������� ��������\n"
-"��� �� ������� ��� \"�����\" � �������� ���."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"����, �������� ������ ����. ��������, ������ COM1 ��� Windows ��� GNU/Linux\n"
-"�� ������ ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (��� LInux LOader) � Grub �� bootloader-�: �� ���� �� ���������\n"
-"GNU/Linux ��� ��� �� � ����� ����������� ������� ������������ �� ��������� "
-"��.\n"
-"�����������, ���� ����� ����������� ������� �� ������� � ����������\n"
-"��������. ��� ���� �� ����� ��� ���, ������ �� �������� ������ �� ���� �\n"
-"���� �����. �������� �� �������� ����� ���������.\n"
-"\n"
-"\n"
-"���� �� �� ������ �� ������ ������ �� ���� ����������� ������� �� �����,\n"
-"� ����� ������ ������ �� �������� ����������� ������. �� � ����� ������,\n"
-"�� �� �������� �� boot-�������, �� �� �� ���������� !"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"������ �� �������� ���� ������� ��\n"
-"��������� ������������, ���������� �� ������������ �� GNU/Linux.\n"
-"\n"
-"��� �� ��� ������� � ����, ����� �������, �������� \"������ ������ ��\n"
-"������������ (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"�������� ������� ����, ����� ������ �� �������, �� ��\n"
-"���������� ����� �� Mandrake Linux ���. ��������, ������ ����� �� ���� �� "
-"����� ��������\n"
-"� ���� �� ����� �� �� �����������."
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"������� \"OK\", ��� ������ �� �������� ������ ����� �\n"
-"������ ������������ �� ���� ����� ����. ��������, ���� ������ �� \"OK\", "
-"������ ������ �� ������������ ������� � �� ���� ����� � ������ ������������ "
-"�� ���� ����� ����,\n"
-"����������� ������� � �� � Windows �����.\n"
-"\n"
-"������� \"������\", �� �� �������� ���� �������� ��� ������ �� ������� �\n"
-"�������� ������������ �� ���� ����� ����."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"������� ��� �������(��) ������(�): %s\n"
-"\n"
-"\n"
-"���� ������� �� ��������� �� ������������. �� ����� �������� �������� ���\n"
-"�����������, �� ���� �� �� ������� ����. � ���� ������, �� ������ �� ���\n"
-"�������, �� �� ����������� �������� ���-�����.\n"
-"\n"
-"\n"
-"�������� �� ������ �� ����������� ���� ������� ?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "�� ������ �� ���������� broadcast ��� NIS ������"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "������� FAT ����������� ������� � ���������� %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "���� ������� �� � ����������� �� FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"�� �� ���������� ������� ����� �� ������, ����������� ������������ � ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "������ ��� �������� �� ����� %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"���� �� �������� �� ��������� �� �� ������ �� ``����������� ��'' ��������, "
-"�� �� ������.\n"
-"������ �� �������� ������ ���������� �� ���� ��: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"������ �� ����� root-���.\n"
-"������ �������� ��� (��� ������� �� �����������).\n"
-"������ �������� �������� ``����� �� ���������'' � �� ������� `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "������ �� ����� swap-���"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"������ swap-���\n"
-"\n"
-"�� �������� �� ��� ��� ?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "������ �� ����� FAT ��� �������� � /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "��������� ���������� �����"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "���� ���������� ����� �� ��������� �� ��� ���"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "��������� �� ����������� ���"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "���� ���, ����� ���� �� ���������"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "��������� �� Windows ����� �� loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "��� ��� ������ �� ���������� �� Linux4Win ?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "�������� ����������"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "�������� �� root-���� � MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "�������� �� swap-���� � MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "��������� ���������� ����� �� Windows ����"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "��� ��� ������� �� ���������?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "���������� ��������� �� Windows ��������� �������"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"�� ���������� �� ������ � ����� FAT ���, \n"
-"������ ���������� ������: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"������ Windows ��� � ����� ������������, ���� ����� ����������� ''defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"��������!\n"
-"\n"
-"DrakX ������ �� ���������� ����� Windows ���. ������ ����������: ���� "
-"�������� �\n"
-"������. ��� ��� �� ��� �� ���������, ������ ����� �� ������� scandisk (�\n"
-"���������� �� ���������� defrag) ��� Windows ����� ���� ���, ������ \n"
-"��������� �������������. �� ���� ����� �� ��������� ����� �� ������� ��.\n"
-"������ ��� �������, ��������� ��."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "����� ������ �� �������� �� windows?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "��� %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "��������� ������������ �� FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"���� FAT ������ �� ����� �� ���������� ��� �� ���������� ���� loopback (��� "
-"���� ���������� ����� �� �����)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "������ ����� ����"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "�������� Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "����� ������ �� ���� ������ �������, ��� �� ��������� �� ������������?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "������ ������������ ������ � ������e ����� ��� �� %s �� ����� ��������"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "��������� ��������� �� �����"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "��������� fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"���� ������ �� ��������� %s.\n"
-"������ ��� ������, �� ���������� �� �������� ����������� `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "���� ���������� �������� ����� �� ����"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "�� ���� �� ������ ������� ����� �� ����������"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "���������� �� ��������� �� ������ �� DrakX ������ �������� �������:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "��������� ��������� ��: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "�������� �������"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "���������� �� �������"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"����� �� ������, �� �� ���� ��� �� �� ������ � ��� ���������.\n"
-"������ �� ���������� �� ���� ����."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "�������� ������� �� ��������� %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"����� ����� ������ �� �� ����������� ����� ������.\n"
-"��� CDROM ������������ �� ��� ������� ����� �� � ��������.\n"
-"��������� ������� ����� �� ������������ �������� ����������� \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "����� ����� � %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "���� ����� ����������"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "�������� � ���� `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"������ ������� � � ����� �������. ���� �� ����� �������� � �������������\n"
-"�� Mandrake Linux. ��� �� ����� ������� �������� � ���������� ���������. "
-"�������,\n"
-"��������� 'F1', ������ ���������� �� CDROM � �������� '����'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "���� ����������"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "����, �������� ���� �� �������� ������� �� ����������:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "������ �������� �� �������, ����� ��� ���������, � ����� %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"��� ������ �� ����������� ��-����� �� ���� ��������,\n"
-"�������� ������� ������, ����� ������ �� �����������.\n"
-"\n"
-"��� ����� ������� �� �� ���������� ���� ���-������� ������;\n"
-"��� 100%% �� ���������� ������ ��������� ������."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"����� ����� �� ����� �� ���� �� %d%% �� ���� ������.\n"
-"\n"
-"��� ������ �� ����������� ��-����� �� ����,\n"
-"�������� ������� �� ��������, ����� ������� �� �����������.\n"
-"��� ����� ������� �� �� ���������� ���� ���-������� ������;\n"
-"��� %d%% �� ���������� ������ ������� ������."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "�� ����� ������������ �� �������� ��-����� ��� ��������� ����."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "������� ������ �� �����������"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "����� �� ����� ������"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "�������� �� ������ ���� �� ����"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "���� ��������: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "��� �����"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "���: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "������: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "��������: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "�������: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"�� ������ �� �������� ������ ����������, ������ ������ ����� �� �� "
-"�����������"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "�������� ������ �� ����� �����������"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "�������� ������ �� ����� ����������"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "�� ������ �� ����������/������������ ���� �����"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "���� � ����� �����, �� ���� �� ���� ����������"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "�� ������ �� �������� ���� ����� ����������. ��� ���� � ����������"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"���� ����� ������ �� ���� �������\n"
-"������� �� ���, �� ������ �� �� ��������� ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "�� ������ �� ��������� ���� �����. ��� ������ �� ���� �������"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "������ ����������� ������������ ������"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "����������"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "������/������ �� �������"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "���������� �� ������ �� ������"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "��������� ����������"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "�������� ��������, ����� ������ �� �����������"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "����������"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "����������"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "�������� ����� "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "����, ���������, ���������� �� ������������"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ������"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "����������� �� ������ %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "������"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "������"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"������� CD-ROM !\n"
-"\n"
-"����, ������� CD-ROM ��������� \"%s\" � ������������ � ��������� Ok, ������ "
-"��� ������.\n"
-"��� �� ������, ��������� ������, �� �� ��������� ������������� �� ���� CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "�� �������� �� ��� ��� ?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "����� �� ������ ��� ����������� �� ��������:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "����� �� ������ ��� ����������� �� ��������:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"��������\n"
-"\n"
-"����, ��������� ��������� ��-����. ��� �� ��� �������� � ����� �� ���,\n"
-"�� ������ �� ���������� ������������ �� ��������� CD �������. ���������\n"
-"'������', �� �� ���������� ������������ ��� ���� ��������.\n"
-"\n"
-"\n"
-"����� ���������� ��������� �� � ��������� CD ������� �� �� ���������������\n"
-"��� GPL ������� ��� ������� �����. ����� ����� ��������� � ��� ���������\n"
-"� ����������� �� ����������� �� ������. ����, ��������� ���������� � ������\n"
-"���� ���������� ������� ����� �� ���������� ��� ���������������� "
-"�����������\n"
-"����������.\n"
-"������ ������� �� ������� ������������� �������, ���������� (����� � ���\n"
-"����������), ������������������, �������� ����������, ���������������\n"
-"�������������� ��� ������������� �� ������������.\n"
-"����� ���������� �� ���������� ��������� ������������� ������� �� ��\n"
-"����������� ������. ����� ��� ����������� ������ �� ���� ������ �����,\n"
-"���������� �� ������ �� ����������� ���������� �� ������ �� ���� �������\n"
-"��� �� �� ���������� �� ���������� � �����. ��� �� ��� �������, ����\n"
-"�������� �� � ����������� ��� ��������� �� ���������.\n"
-"������������� �� ����� ���� ��� ���������� �� ����� ����������, �����������\n"
-"�� ��������������, ���������� �� ���������.\n"
-"\n"
-"\n"
-"������ ����� �� ������������ �� ��������� CD ������� ����������� ��\n"
-"����������� �� ������ � �� �������� ���� ������������� ����������� ��\n"
-"�������� �� �������� ����� ��������� �� ����������� ��������.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "����� �� ������"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "�������� �� ������ �� ���������� �������� \"%s\" ?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "����������� �������"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"����������\n"
-"\n"
-"������������� ������� � ���������� ���������� �������� � Mandrake Linux "
-"������������� ��-���� �� ��\n"
-"������� \"��������� ��������\". ����������� �������� ��������, �� �� �� "
-"����������� ���� ��, ������\n"
-"��������, ������, ������� � ������������ �������� �� �� ������������� "
-"������� � ����������\n"
-"���������� �� Mandrake Linux �������������.\n"
-"\n"
-"\n"
-"1. ����������� �������\n"
-"\n"
-"����, ��������� ���������� ���� ��������. ���� �������� � ����������� "
-"������� ����� ��� �\n"
-"MandrakeSoft S.A., ����� �� ������ �� ���������� �������. ���� "
-"�������������, ����������\n"
-"��� ������������ �� ���������� ������� �� ������� � �� � ����� ��� ������� "
-"�������� �\n"
-"������� �� ����������� �� �������� ��������� � ��������� �� ���� ������.\n"
-"��� �� �� ����������� � ����� ���� �� �������, ������ ����� �� �����������, "
-"�������� ���\n"
-"���������� ���������� �������. ������� �� �� ���������, ������ ��� �������� "
-"���������� �������\n"
-"����������� ��� ��������� � ��������� �� ���� ������ �� ���������� � ������ "
-"����������� �������\n"
-"�� �� ���� ������. ��� ������������ �� �������, ������ ��������� �� "
-"���������� ������\n"
-"����� �� ���������� ������.\n"
-"\n"
-"\n"
-"2. ���������� ��������\n"
-"\n"
-"����������� �������� � ����������� ������������ �� ������������ \"������ "
-"������� ��\", ��� ��������,\n"
-"� ������� �� ����������� �� ������.\n"
-"MandrakeSoft S.A., ��� ������� ������������� � � ������� �� ������, �� � "
-"��������� �� ������� �� e\n"
-"��������, ��������, ����� ��� �������� ���� (����������� ������ �� ����� �� "
-"������, ������������ ��,\n"
-"������, ��������� ������, ������� ������ � ��������� � �������� �� ������� "
-"������� ��� ������� � �� �\n"
-"����� ����������� �� ���� ������) ����������� �� ���������� ��� �� "
-"�������������� �� �� ��������\n"
-"���������� �������, ���� ��� MandrakeSoft S.A. �� � ��������� �� "
-"������������ ��� ���������� �� ������ ������.\n"
-"\n"
-"���������� ����������� �������� � ������������� ��� ������������ �� �������� "
-"������� � ����� ������\n"
-"\n"
-"� ������� �� ������, MandrakeSoft S.A. � ������� ������������ ���� ��� "
-"������� ������� �� �����\n"
-"��������� �� ������� � �� ���� ��������, ��������, ����� ��� ������� ���� "
-"(����������� ������ �� �����\n"
-"�� ������, ������������ ��, ������, ��������� ������, ������� ������ � "
-"��������� � �������� ��\n"
-"������� ������� ��� ������� � �� � ����� ����������� �� ���� ������) "
-"����������� �� �������������\n"
-"� ���������� �� ��������� ���������� � �� ����������� �� ��������� "
-"���������� �� ��������� �� Mandrake Linux,\n"
-"����� �� ��������� � ����� ������ �� �������� ���������������.\n"
-"���� ���������� ����������� �� ������ ��, �� �� ���� ��, ������� "
-"������������� ���������� ��������\n"
-"� ���������� �������.\n"
-"\n"
-"\n"
-"3. GPL ������� � ������������ �������\n"
-"\n"
-"����������� ������� �� ������ �� ���������� ��������� �� �������� ���� ��� "
-"�����������. �������� ��\n"
-"���� ���������� �� ���������� �� ��������� � ��������� �� GNU ����� �������� "
-"������, ����� ������� �������\n"
-"\"GPL\", ��� ������� ���� �������. �������� �� ���� ������� �� ���������� �� "
-"����������, ��������, ���\n"
-"���������������� ������������, ����� �� ��������. ����, ��������� ���������� "
-"��������� � ��������� ��\n"
-"������������ ������� �� ����� ��������� ����� �� �� ����������. �������� "
-"������� ������� �������\n"
-"�� ������������ �� �������� �� ����� �������� ��� ���������� �� �����, � �� "
-"��� MandrakeSoft.\n"
-"���������� ����������� �� MandrakeSoft S.A. �� ���������� �� GPL �������. "
-"�������������� ��������\n"
-"�� MandrakeSoft S.A. �� ��������� �� ��������� ������. ����, ���������� "
-"�������������� ��\n"
-"������ ����������.\n"
-"\n"
-"\n"
-"4. ����� �� ������������� �����������\n"
-"\n"
-"������ ����� ��� ������������ �� ���������� ������� ����������� �� "
-"����������� �� ������ � ��\n"
-"�������� �� �������� �� ��������������� ����������� � �� �������� ��������� "
-"�� ����������� ��������.\n"
-"MandrakeSoft S.A. ������� ������� �� �� ���������� � ��������� ���������� "
-"�������, ���� ���� ��� ��\n"
-"�����, �� �������� ����� � � �������� ����.\n"
-"\"Mandrake\", \"Mandrake Linux\" � ���������� ������ �� �������� ����� �� "
-"MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. ����������� ������\n"
-"\n"
-"��� ����� ���� �� ���� ������� �� ���� ���������, ��������� ��� ����������� "
-"������ ������� �� ���,\n"
-"���� ���� �� �������� �� ��������. ��� �������� ���������� �� ���������� "
-"��������� ������ �� ��������.\n"
-"��������� � ��������� �� ���� ������ �� ���������� �� �������� �� �������.\n"
-"������ ������� �� ��������� �� ���� ����� �� ���� ����� �� �� ������� �� "
-"����. ���� ������ �����,\n"
-"��������� �� ����� �������� �� ���������� ������ �������� �� ����� - "
-"�������.\n"
-"�� �������� ������� �� ���� ��������, ����, �������� �� � MandrakeSoft S.A.\n"
-"\n"
-"���������: ���� � ��������� ������������� ������ �� ���������, ����� "
-"��������, �� ���\n"
-"�������� �� � ���������� �����. ���� ��-���������� �������� ��������� "
-"������� �������� ��\n"
-"���������.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "����������"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "����, �������� ���������� �� ������������."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "��� ����� ������ �� ����������� ����������"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "����� ���� ���������� ������� ?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "����������/������"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "���� ���� ���������� �� � ��� ���������� ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "��������������"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "���������"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "����������"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "���������� �� ������ �� ������"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "����, �������� ��� �� �������."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "���� �� �������"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "����, �������� ��� ��� ������ ���� � �������� ������� ��."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "�������� �� ������"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "�������� �� 2 ������"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "�������� �� 3 ������"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "��������� �� PCMCIA ������� ..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "��������� �� IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "���� ������ �� ������������"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "����������� �� �������� �� �������� �� ����� �� ���������"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "�������� ����� �� ���������"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"�� ���� �� ������� ��������� �� ��������, ��������� � ��������� �� ��� :(\n"
-"���� �� �� ������ �� ������� ������ ������ (������ ����� �� ����� "
-"��������!).\n"
-"����� ������� � �� ��������� �� DrakX ������� ��������� � ������.\n"
-"(�������� � %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake �� ���� �� ������� �������� ��������� �� ��������.\n"
-"���������� �� �������� ���� !"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"���� �������� ����� �� 1 �� ���������� ���� ! ������������ �� ��������, ��, "
-"�� �� ���������� ��������� ��, �� ������ �� ��������� ���������� ���� � "
-"DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "�� � ������� ������ ��� �� �����������"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Root ���"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "��� � root-����� (/) �� ��������� �� ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "������ �� �� ������������, ����� ������������� �� ����������� �����"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "�������� ��������, ����� ������ �� �����������"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "�������� �� ���� ������� ?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "����������� �� ���owe"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "��������� � ����������� �� ����� %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"���� ���������� swap �� ����������� �� ������������, ���� �������� �����"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "����� ������� ������"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "����� ������ �� ����������"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"��������� �� ���� ���������� ����� �� ���������� ��� ���������� (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "����� (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "��������� (%d Mb)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "�������������� (%dMb)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"���� �������� ��������� ��� ����� �� ������ �� ������ �� �����.\n"
-"�������� � ������ ���� auto_install ������������ �������."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "������ �� �������"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "��������� �� �������"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "����� �� ������"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "������� ������� ��������� ����� �� ������"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "������ �� �������"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "��������� �������� � ��-������ �� ���������� ������������"
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "�������� ������ �� �����������"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "���� ������"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"��� ����� ������ CD-�� �� ������� ��-����, ��������� Ok.\n"
-"��� ������ ���� ���� �� ���� CD-��, ��������� ������.\n"
-"��� �� ������� ����� CD-��, ������� ��, � ��������� Ok. "
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM ��������� \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "��������� ������������"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"���������� ����� %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "���� ������������� ���������"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "������� ������������ ������� � ���������� %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "������� ������� �� ���������� �� ������ � ���������� %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"���� ����� ������������ �� ������� ������� � ��� ��������.\n"
-"\n"
-"��������:\n"
-"\n"
-"������ ���������� ���������� ��������� �� ���� ������� � �� �����\n"
-"����������, ��������� �/��� �������� ������� �� ���� ������� ������\n"
-"�� ����� �������, �� ������������ ���� �� ��������� ���������, ����������\n"
-"�/��� ������������ �� ���� �������.\n"
-"\n"
-"� ���������� �������� �/��� ������� ���������� ������ �� ������� � ����\n"
-"������ �� ������ ���� �� ������������ ����. �������� �/��� ��������\n"
-"���������� ������ �� ������� ����������� ������, ��� ���� ��� �� ������\n"
-"���������.\n"
-"� ������� ������ Mandrakesoft ��� �������� ������������� �/���\n"
-"������������������� �� �� ����� ������� ����������� �� ������� � �� �\n"
-"�����, ������� ��� �������� ����� (�����������, �� �� ���� ���������� �\n"
-"�������� �� �����, ���������� �� ������, ������ �� ����������� ����� �\n"
-"����� ������� ������, � ���������� ������������ � ���������� �� �������\n"
-"�� ������� �������) ������������ �� ������������, ����������� ��� ����\n"
-"��������� �� ���� �������, �� ����� �������� �/��� �������� ����������\n"
-"���������� ���� �� ��� ������ ���� ���������� � ���� ������������.\n"
-"\n"
-"�� �������� ������� �� ���� ������������, ����, �������� �� � \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "��������� � ���������� ������ �� ���������� �� ������� � ��������"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "�������� ��������� ������,�� ����� �� �������� ��������"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "��������� � ���������� ������ �� ���������� �� ������� � ��������"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "��� � ��������� �� ���� ?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "����������� �� �������� � �������� �� GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "����������� ������������� �� ������� (�������� NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP ������"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "��������� CUPS ������"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "���� �������"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "����� �� ����(�) ?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "���������"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "�����"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "������ ����"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "�������"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN �����"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "������� �����"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV �����"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "������� �������"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "�������� ������ �� root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "��� ������"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "�������� � ��������� ������ (������ �� ���� ����� ���� %d �������)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "�������������"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP �����������"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP ����� dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP ������"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS �����������"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS ������"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS ������"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"���������� bootdisk � ��������� �� ���������� � Linux ��������� �� "
-"����������\n"
-"�� ����������� bootloader. ���� � �������, ��� �� ������ �� �����������\n"
-"SILO �� ��������� ��, ��� ����� ����� ����������� ������� ����� SILO\n"
-"��� ��� SILO �� ������ � ����������� �� ���������. ����������� bootdisk\n"
-"���� �� ���� ��������� ���\n"
-"������������ ����� �� Mandrake, ���������� ���������������� ��� �����\n"
-"������ �� ����.\n"
-"\n"
-"��� ������ �� ��������� bootdisk �� ������ �������, ��������� ������� �\n"
-"������� ���������� � ��������� \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "����� ����� ����������"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "����� ����� ����������"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "��������"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"��������� bootdisk � ��������� �� ���������� � Linux ��������� �� "
-"����������\n"
-"�� ������������ ��������� ��������. ���� � �������, ��� �� ������ �� "
-"�����������\n"
-"LILO (��� GRUB) �� ��������� �� ��� ��� ����� ����� ����������� ������� "
-"����� LILO ��� LILO ��\n"
-"������ � ����������� �� ���������. Bootdisk-�� ���� �� ���� ��������� ���\n"
-"������������ ������� �� Mandrake, ���������� ���������������� ��� �����\n"
-"������ �� ����. ������ �� �� ������ bootdisk �� ��������� �� ?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "��������� ���� �����"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "�������� ����� �����,������ �� ��������� ���������� �������"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "������� ������� � ���������� %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "��������� �� ���������� �������"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "���������� �� bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"�������� ����� ������������ ��� ����������\n"
-"������, �� ����� yaboot ���� �� ���������.\n"
-"������������ �� ��������, �� �� ������\n"
-"�� ��������� BootX, �� �� ���������� �������� ��"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "������ �� �� ���������� aboot ?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"������ ��� ����������� �� aboot, \n"
-"�� �� ������ �� �� �������� ������������ ����, ��� ���� �������� ������ ��� ?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "����������� �� bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "������������ �� bootloader ���������. ����� �� �������� ������:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"���� �� �� �������� �� ��������� Open Firmware ���������� ����������,\n"
-" �� �� ������� ����������� ��������. ��� �� ������� ����������� � ���\n"
-" ������������, �������� Command-Option-O-F ��� ������������ � ��������:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" ���� ����� ��������: shut-down\n"
-"��� ���������� ������������ �� �������� �� ������ �����������."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "������� ������ ������� � ���������� %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "��������� ������� � ����������� ����������"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"����� ����� �� �� ���������.\n"
-"\n"
-"�������� �� ������ �� �������� ���� ?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"������������, ������������ � ����������.\n"
-"���������� ���������� ���������� � �������� Enter �� �� �������������.\n"
-"\n"
-"\n"
-"�� ���������� ������� ��������, �� ���� ������ �� Mandrake Linux,\n"
-"�� ������������� � Errata, �� ����� : \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"���������� �� ����������� �� ��������� �� ������ �� �������� �\n"
-"������������������� ����� �� Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "�������� ������� �� ����������� ����������"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"������������� ���������� ���� �� ���� ������� ��������������,\n"
-"� ����� ������ �� �������� ������� �� ���� !!!\n"
-"(���� � �� ������������� �� ����������� �� ����� ������).\n"
-"\n"
-"���� �� ������ �� ��������� ������������.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "�������������"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "�������"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "������ ����� �� ������"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "���������� �� Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> ����� ����������  | <Space> ������  | <F12> ������� �����"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "������ kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "�������� ����"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "�����������"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "���� ���������"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "����������"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "������� �������"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "������� �������"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "������������ ����� �������� � ��������� �� �����"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "��� �����, �������� ������\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "������ ����� ? (�� ������������ � %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "������ ����� ? (�� ������������ � %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "�����: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "������ �� �� ���������� aboot ?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "������ ����� ? (�� ������������ � %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "����� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "�����"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "U� ����������"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US ����������"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "�������� (�����)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "�������� (������ ������)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "�������� (���������)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "�������������� (��������)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "�������� (���������)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "��������� (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "���������� (������ �������)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "���������� (������� �������)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "����� (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "������ (��� ���������� �������)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "������ (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "������ (��������)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "������ (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "��������� (\"�����\" �������)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "��������� (\"��������\" �������)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "��������� (���������)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "������� 106 �������"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "�������� ����������"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "�����������������"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "��������� AZERTY (�����)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "��������� AZERTY (����)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "��������� \"������� ������\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "��������� \"���������\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "������ (QWERTY �������)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "������ (QWERTZ �������)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "�����������"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "�������� (������)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "�������� (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "�������� (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "����� (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "�������� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "�������� (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "������� (��������)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "��������� ����������"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "�������������� ����������"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "������ (����������� \"F\" �����)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "������ (������� \"Q\" �����)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US ���������� (������������)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "���������� \"������� ������\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "���������� (��������)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "\"��������� ����\" �� ����������: %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "����� �������� ��������� ������\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "����� �� Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "����������� PS2 �����"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington THinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genuis NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 �����"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "����������� 2-������� �����"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "���"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Wheel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "�������"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "����������� 3-������� �����"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (�������, �� ������ ��� C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "BUS �����"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 ������"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 ������"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "����"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "��� �����"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "����, ��������� ������� ��"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "�� �� ���������� ������� ��,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "������� ������� !"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "�������"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "������� ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- ��������"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "������ �������� �� � ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "������ �� ��� ��������"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"���-������ ����� �� ��������� ���� ADSL � PPPOE.\n"
-"����� ������ ��������� PPTP, � ma��� ��������� DHCP.\n"
-"��� �� ������, �������� '��������� PPPOE'."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "��������� DHCP"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "��������� PPPOE"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "��������� PPPTP"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"����� DHCP ������ ������ �� ���������� ?\n"
-"�� ������������ � dhcpcd ?"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"�� ���� ������� ������ ������� � ��������� ��.\n"
-"�� ������ �� ��������� ����� ��� ������."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "�������� ������ ���������"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "����, �������� ��� ������ ������� �� ��������� �� ������ ��� ��������"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "�� � ������� ������� �����"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "�������� �� �������"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"����, �������� ��� �� ���� ��� �� ������.\n"
-"����� DHCP ������� �������� ���� �� �� �������.\n"
-"Host ����� ������ �� ���� ������� ������������� ���,\n"
-"���� ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "��� �� ����:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "��������� �� ��������� �� �������"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "������ ISDN �����"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "�������� ISDN �����"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "����� � ����� �� ISDN �������� ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"��� ISDN ��������� ������������ ?\n"
-"\n"
-"* ������� ��������� �������� isdn4net. ������� ����� �����������\n"
-"  �� � �������� �� ��������� � �� � ����������.\n"
-"\n"
-"* ������ ��������� � ��-����� �� ���������, �� ����������,\n"
-"  �� � ��-����� �����������.\n"
-"\n"
-"������������ �� ����������� ���������.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "���� ��������� (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "����� ��������� (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "��������� �� IDSN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"�������� ���������� ��.\n"
-" ��� �� � � �������, �������� Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "�������� ������"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "�������� ������ (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "�������� �� ��������� ����"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"�������� �� ��������� ����\n"
-" ��� D-����� (����� �����)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "����� �������� ������� �� ��������� ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "����� ��� ����� ����� ?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "�� ����"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"��� ����� ISA �����, ����������� �� ��������� ����� ������ �� �� �����.\n"
-"\n"
-"��� ����� PCMCIA �����, �� ������ �� ������ IRC � IO �� ������� ��.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "�����"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "�������"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "��� � ISDN ������� �� ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"������� � ISDN PCI �����, �� � �������� ���. ���� �������� ����� PCI ����� "
-"�� ���������� �����."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "�� � �������� ISDN PCI �����. ���� �������� �� ���������� �����."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "����, �������� ������ ���� ��� ����� ������� ������� ��."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "����� �� �������� �� �������"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "��� �� ��������"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "��������� �����"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "������������� ���"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "�������� �� ������"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "�������� �� ��������"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "��� �� �������"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "����� DNS ������ (�� �����)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "����� DNS ������ (�� �����)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"������ �� �� ��������� ��� �� ������������ ��������."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"������ �� ������������ ��������."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "� ������� ��� �������� ��� ��������"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"������ �� �� �������� ��� �������� ��� �� ������������ ��������."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "� ������� �� ��� �������� ��� ��������"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "������"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "�������"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "� ������� ���������� �������"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "�������� ������ � ���������"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "���� �� �������� %s ��������."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"���� �� �������� %s ��������.\n"
-"\n"
-"��������� OK, �� �� ����������."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "��������� �� �������"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"��� ���� ������� ������� ����������, ������� �� ���� � ���������.\n"
-"������� Ok, �� �� �������� �����������, ��� ������, �� �� ����������� "
-"�������� � ��������� �� ������.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"����� ����� ��� ���������� �� ��������� �� �����\n"
-"\n"
-"��� ��� �� ��� �� ��������� ��������/��������� �� ������.\n"
-"��� �� ������ �� ���������� ����������� ��������, ��������� ���������.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "�������� ������ �� ���������"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "��������� ����������� ��������"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "��������� �� ���������� ..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "���������� ������� ������"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "������� �� ���� %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN ������"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "�������� %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL ������"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "������� �� ��������� %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "������� ������"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "�������� � ������� ������"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN ������"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet ����� ��������"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "�������� ��������, ����� ������ �� ����������"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"��������� ��� ������� ������ �� ������ ��� ��������.\n"
-"�������� ����, ����� ������ �� ����������.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "�������� ������"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "������ �� �� ���������� �������� �� ��� ��������� ?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "��������� �� �������"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "������� ������ �� ���� ������������"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"������� ������� ��� �������������� �� �������:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"������������, ��������� � �������� ����������� � ���������.\n"
-"\n"
-"����������� �� ����� ��������� ��� ��������� ��.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"���� ���� ����� ����, ������������ �� �� ������������ X\n"
-"������� ��, �� �� ��������� �������� ��� ������� ����� �� �����."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"��������: ���� ���������� ���� � ��������� �� �� ������� ��� ��������.\n"
-"������ ��������, �� �� �������� ������������ ���������.\n"
-"���������� �� �������� ��-���� �� ��������� ���� ���������."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"����, �������� IP ����������� �� ���� ������.\n"
-"����� ���������� ������ �� ���� �������� ���� IP �����\n"
-"� �������-��������� ��������� (��������, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "��������� �� ��������� ���������� %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (������� %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP �����"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "������� �����"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "����������� IP �����"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ������� ������ �� ���� ��� ������ 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"����, �������� host name �� ��������.\n"
-"Host ����� ������ �� ���� ������� ������������� ���,\n"
-"���� ``mybox.mylab.myco.com''.\n"
-"������ ���� �� �������� IP ������ �� ����� gateway, ��� ����� �����"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS ������"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway ����������"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "��������� �� proxy"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "������������ �� ID �� ��������� ����� (������� ��� �������)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy-������� ������ �� � http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy-������� ������ �� � ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "��������� �� ��������"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "������ �� ���� �� ������� ������ ��� �������� ?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "���������� �� ��������..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "��������� � ������� � �������� ��� ��������."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "�� ���� ���������, ���� �� �� ������ ���������."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"��������� �� �������� �������� ��� ��������.\n"
-"�������� �� �� ������������ ��������."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "��������� �� ��������"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "����, ��������� ��� ��������� ������ ��-����"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ �� �������"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "����� (DMA) �� �������"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO �� �������"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 �� �������"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 �� �������"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "������ �� ��������� �����"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "��� �� ���������� (����. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "��������� ����� �� ����������"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "1-�� DNS �� ���������� (�� �������)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "2-�� DNS �� ���������� (�� �������)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "�������� �������� ��"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "����� �� ��������"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "������� �� ��������"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Timeout �� �������� (� ���)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "��� �� ������� (������������ ���)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "������ �� �������"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "����������� �� ����: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "��������� ������ �� �� ��������� �� ���� ���������"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"����� �������� � ��������� � ��������, �� �� ���� �� � ���������.\n"
-"������������ ����� � �� ���������� �������� �� ������, �� �� ����� ������ "
-"����� ���� extended-��������"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "���������������� �� ����� %s �� ����: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "��� backup-����"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "������ ��� ����� ��� ����� %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"���� ���� ����� � ������������ ��.\n"
-"����� �� ������ �� ������� ��������.\n"
-"���� �����, �� �������� �� ������� � ���� �� ����� �� ��������\n"
-"���������� � ������"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "�����"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "�����"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "����� �����"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "�����"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "�����"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - ���� Unix ��������� �������"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR ���� ���������"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - ������ ��������� �����"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - �������, ��� ������"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "������� �������"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "��������� �������"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "������� �� ��������� CUPS ������"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "������� �� ��������� LPD ������"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "������ ������� (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "������� �� SMB/Windows 95/98/NT ������"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "������� �� NetWare ������"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "�������� URI �� �������� ����������"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "�������� �������� ���� �������"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "���������� �����"
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "������� �������"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "��������� �������"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "������ ��� ����� ��� ����� %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(�� %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(�� ���� ������)"
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP �� CUPS �������"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (�� ������������)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "�������� ������ ��� ��������"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "��� � ������� ��������� ?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"������������ �� CUPS ������ �������� �� ������ �� �����������\n"
-"���; ���� �������� �� ����� �������� �����������. ����,\n"
-"�������� \"������� �� ��������� CUPS ������\" � ���� ������."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "���������"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "��������� CUPS ������"
-
-#: ../../printerdrake.pm_.c:71
-#, fuzzy
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"� ������������ CUPS �������, ���� ����� �� ����������� �������\n"
-"� �� ���� ������� ���; CUPS ��������� ���������� ����������� ��������\n"
-"�� ������� ��������. ������ �������� �������� �� �������� ��\n"
-"�� �������� � ������ \"������� �� �������������\". ��������\n"
-"������� �� ������������ �� �������� �� �� ��� � ������� �� ������\n"
-"\"�������/���������� ����������\". ������� �� ����� �����, �� ��\n"
-"��������� ������� (���� �� ������ �� 30 ������� ���� ���������\n"
-"�� CUPS, ������ ������ ���������� �������� ������ ������).\n"
-"������ CUPS ������ � �� ����� �����, ������ �� ������ IP ����� �,\n"
-"���������� ����� �� ���� �� CUPS �������, �� �� ������� ����������\n"
-"�� �������� �� �������, ����� �������� ������ ������."
-
-#: ../../printerdrake.pm_.c:72
-#, fuzzy
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"����������, CUPS ����������� �� ��������� ������ ��������� �����,\n"
-"���� �� �� ����� ������ �� ���������� �� CUPS ������� � ���������\n"
-"�� �����. ��� �� ������� ����� ������, ��������� \"�����������\n"
-"CUPS ���������\" � ��������� ����� /etc/cups/cupsd.conf �����. ��\n"
-"���������� �� ������������ CUPS ���� ���� (�������: \"service\n"
-"cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ������� ������ �� ���� ��� ������ 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "������� �� ����� ������ �� � ���� ����� !"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP �� CUPS �������"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "����"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "����������� ��������� �� CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "�������� �� ���������� ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "�������� ���������"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "������ �������"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "������� �������"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "��������� �������"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "��������� ����������� ��������"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "��� �� ��������� �������"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "�������� %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "�������� URI �� �������� ����������"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "������� �������"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "����, �������� ������ ���� ��� ����� ������� ������� ��."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "�������� URI �� �������� ����������"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "��������� �� �������"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "����������� �� ������ ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "����������� �� ������ ..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "������ �� ������ ����� �� �������� ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "������ �� ������ ����� �� �������� ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "����� �� ��������� lpd-�������"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"�� �� ���������� ��������� lpd �������, ������\n"
-"�� ������������ ������� �� ����� �� ���������� ������ �\n"
-"����� �� �������� �� ���� ������."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "��� �� ��������� ����"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "��� �� ��������� �������"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "������ ��� �� ��� �� ���� !"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "������ ��� �� ��������� ������� !"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "��������� �� SMB (Windows 9x/NT) �������"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"�� �� �������� �� SMB �������, ������ �� ������ �����\n"
-"�� SMB ����� (��������� ! �� ���� �� � �������� �� TCP/IP ����� !)\n"
-"� �������� IP ������ �� ����������� ������, ����� � ������ ��� ��\n"
-"��������, �� ����� ������ ������ � ��������� ����, ������ � ����������\n"
-"�� ��������� �����."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "���� �� SMB ������"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP �� SMB ������:"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "���� ���"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "������� �����"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "������ �� ����� �������� � ����� � IP ������ �� ������� !"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "������ ��� �� SAMBA share !"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "����� �� NetWare �������"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"�� �� �������� �� NetWare ������� ,������ �� ������ ���� �� � ��������\n"
-"������ �� �������, ����� � ����� �� ��������,��������������� ���,������."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "������ �� ��������"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "��� �� ��������� ��������"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "������ ��� �� NCP ������ !"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "������ ��� �� NCP ������ !"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "����� �� Socket �������"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"�� �� �������� �� socket �������, ������ �� ������������\n"
-"����� �� ����� �� �������� �, ����������, ����� �� ����.\n"
-"�� HP JetDirect �������, ������� �� ����� ����������� � 9100,\n"
-"�� ����� ������� ���� �� ������. ����� ������������ ��\n"
-"�������� ��."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "��� �� ���� �� ��������"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "������ ��� �� ���� �� �������a !"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "�������� ���������� URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"������ �������� �� ���������� URI �� ������ �� ��������. URI ������ �� "
-"������� ��� CUPS ��� Foomatic ��������������. ����������, �� �� ������ "
-"������ URI �� ���������� �� spooler-���."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "������ �� ���� ������� ������� URI !"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"����� ������� �� ������ �� ��� (�������� lp).\n"
-"�������� �������� � ����������� �� ������ �� �����\n"
-"���������. ��� ��������� �� �������������."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "��� �� �������"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "��������"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "��������������"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "���������� �� ������ ����� �� �������� ..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "��� �� ��������� �������"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "������ �������� �� � ?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "��� �� ��������� �������"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "����� ����� �� ��������"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "����� ����� ������� ����� ?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "��������� �� OKI Winprinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "��������� �� Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-#, fuzzy
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkjet ����������� �������� ������������ �� Lexmark ���������\n"
-"���� ������� ��������, ��� �������� �� ���������� ������ ���\n"
-"��������� ������. ����, �������� �������� �� �� ������� ����\n"
-"��� �� ��������� �� ��������, ��� ����� � �������."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-#, fuzzy
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"��������� �� �������� �� ������������\n"
-"������ �� ��� �������, �� ���������� �� ����������\n"
-"� ���� �� ��������� (��� ���) �� ��������� ��������.\n"
-"����������, �� ��� ����� ������ ������� �� ������ ��\n"
-"��������, ��� ���� ���������� �� �� ������."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "����������� %s ������ �� � ���� ����� !"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "����������� %s ������ �� � ����� !"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "������� %s � ����� ��������� !"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"������ �� �� ��������� ���� ������� (\"%s\")\n"
-"���� ������� �� ������������ ?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "������� ��������"
-
-#: ../../printerdrake.pm_.c:1583
-#, fuzzy
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"����, �������� ������� �������� �� �����.\n"
-"���������: ��������� �������� �� ������ ���� �� ������ ����� �����\n"
-"����� �� �� �������� � �� ������� �������� � ����� ����� ���� ������\n"
-"�� �� ������. � �������� ������ � ���������� ���������� ������� ��������."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "��� ������� ��������"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "�����"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "���������� ������� ��������"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "������������ ������� �������� (�����)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "������������ ������� �������� (�4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "������� �������� ��� ������"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "����������� �� ������� ��������"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "����������� �� ������(���/���) �������(�/�) ..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"��������� �������� �� ��������� ��� ��������.\n"
-"���� �� ������ ����� ����� ����� �������� �� �������.\n"
-"��������� �� ������:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"��������� �������� �� ��������� ��� ���������.\n"
-"���� �� ������ ����� ����� ����� �������� �� �������.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "��������� �� ����� ������ ?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"�� �� ���������� ���� �� ��������� ��� (���������� ��������), ������ ��� �� "
-"���������� ��������� \"%s <file>\" ��� ��������� ������� ����������: \"xpp "
-"<file>\" ��� \"kprinter <file>\". ���������� ����������� �� ���������� �� "
-"�������� �������� � �� ��������� ����� ����������� �� �������.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"������ �� ���������� ���� ������� � � ������ \"������� �� �����\" �� "
-"��������� ������� � ���� ����������. �� �� �� ���������� ����� �� �����, "
-"������ �� �� ������ �� ������������.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"��������� \"%s\" ���� ���� �� ��������� �� ��������� ����������� �� ������� "
-"�� ���������� ������ �� ��������. ������ �������� �������� ��������� ��� "
-"��������� ���, ����. \"%s <file>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, fuzzy, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"�� �� ������ ������ �� ���������� ����� �� ������� �������, ��� ��������� "
-"������� ������� ��-���� ��� ������� �� ������ \"������ � ����� �� �����\".\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"�� �� ���������� ���� �� ��������� ��� (���������� ��������) ����������� "
-"��������� \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"������ �� ���������� ���� ������� � � ������ \"������� �� �����\" �� "
-"��������� ������� � ����� ����������. �� ��� �� ���������� ����� �� �����, "
-"������ �� �� ������ �� ������������.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-#, fuzzy
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"�� �� ������ ������ � ���������� ����� �� ������� �������, ������� �� ������ "
-"\"������ � ����� �� �����\".\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"�� �� ���������� ���� �� ��������� ��� (���������� ��������), ����������� "
-"��������� \"%s <file>\" ��� \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"��������� \"%s\" � \"%s\" ���� ���� ���������� �� ��������� ��������� "
-"��������� �� ���������� ������ �� ��������. ������ �������� �������� "
-"��������� ��� ��������� ���, ����. \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "�������"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "�������� �� ������� \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "�������� �� ������� \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "������ � ��������� �����"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "������ �� ����� �� �������� ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "������ �� ��������� �� �������"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"������ �� �������� ����������� �� ��������, ����� ��� ���������\n"
-"�� spoller %s �� %s, ������� spooler. ������ ���������� �� �����������\n"
-"(��� �� �������, ��������, ��������������, ��� �� �������� �\n"
-"��������� �� ������������) �� �����������, �� �������� �� ��\n"
-"����������.\n"
-"�� ������ ������ ����� �� ����� ����������� �� �������� �������:\n"
-
-#: ../../printerdrake.pm_.c:1818
-#, fuzzy
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS �� �������� �������� �� Novell ������� ��� ��������\n"
-"��������� ����� ��� ��������-��������� �������.\n"
-
-#: ../../printerdrake.pm_.c:1820
-#, fuzzy
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ �������� ���� ������� ��������, ���������� LPD ��������\n"
-"� Socket/TCP ��������.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD � LPRng �� �������� IPP ��������.\n"
-
-#: ../../printerdrake.pm_.c:1824
-#, fuzzy
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"���� ����������, �������� �� ��������� � ���� ��������\n"
-"��� \"foomatic-configure\" �� ����� �� ����� �����������."
-
-#: ../../printerdrake.pm_.c:1825
-#, fuzzy
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"���� ����, �������� ��������� � PPD ������� ������������\n"
-"�� ��������������� �� ��� � ���������� CUPS �������� ��\n"
-"����� �� ����� �����������."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"���������� ����������, ����� ������ �� ����������� � �������\n"
-"\"���������\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "�� ���������� ��������"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "���������"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"������� � ��� \"%s\" ���� ���������� � %s.\n"
-"������� \"���������\", �� �� �� �����������.\n"
-"������ ���� ���� �� �������� ���� ��� ��� �� ��������� ��������."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "����� �� �������� ������ �� ������� ���� �����, ����� � �����������"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"��������� \"%s\" ���� ����������,\n"
-"�������� �� ������ �� ����������� ����������� ?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "���� ��� �� �������"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "����������� �� %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, fuzzy, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"����������� ��� ������� �� ������������ (\"%s\"),\n"
-"������ �� �� �� �������� �� ������������ � ������\n"
-"��������� ������� %s ?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "����������� �� ������� �� �������� ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "��������� �� ��������� �������"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "���������� ������� ...."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "� ������� ���������� �������"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "���������������� �� ������� �� � ���������"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "�������� ��� �������� �� �������"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-#, fuzzy
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"������ ������ �� ������� � ����� �� ������ �� ����\n"
-"���������. ����, ��������� ����������� � ��������\n"
-"��. ������ �������� �� ��������� ����������� �������\n"
-"������."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "������������ �� ����������� �������"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "������"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "����������"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "����������� �� ����������� ������� � %s ���� �� ���������"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "���������� �� ����������� ������� ��� ����������"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "�������� �� ������������ �������..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "��������� �� LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "��������� �� LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "�������� ��������� spooler"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "��� ��������� ������� (spooler) ������ �� ���������� ?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "��������� �� �������� \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "����������� �� ������ ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "����� �� ��������"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "���������� �� PinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "��������� �� �������� \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "������ �� �� ��������� ������ ?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "������� �������: "
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "�������"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"�������� �������� �� ���������.\n"
-"������� �� ���� �� ���, �� �� �� �����������\n"
-"��� �� �� �������� ���������� �� ����, ���\n"
-"����� \"������ �������\", �� �� �������� ��� �������."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"�������� �������� �� ���������.\n"
-"������� �� ���� �� ���, �� �� �� �����������\n"
-"��� �� �� �������� ���������� �� ����, ���\n"
-"����� \"������ �������\", �� �� �������� ��� �������."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "�������� �� �������"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "�������� �����"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "������ �� �� ��������� ���� ������� ?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "������� ����������� �� �������"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"������� %s: %s %s\n"
-"����� ������ �� ��������� �� ���� ������� ?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "����� !"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "��� �� �������� ��� ��������"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "��� �� ��������, ��������, ��������������"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "������������ �� ��������, �����, �������"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "������������ �� ��������, �����"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "�������� ���� ������� �� �������� �� ������������"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "����������� �� ������� ��������"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "������ �� �� ��������� ���� ������� ?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "���������� �� ��������"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "��������� �� ���� ������� \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "������� �� ������������"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "��������� \"%s\" ���� � ��������� �� �������� �� ������������."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "�������� �� ������ �� ���������� �������� \"%s\" ?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "��������� �� �������� \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy ���������"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"����� ����� � ����������� �� Proxy.\n"
-"\n"
-"��� �� ������ �� ���������� ������ HTTP � FTP proxy\n"
-"��� ��� ��� ������������� ��� � ������\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"����, ��������� ������������ �� HTTP proxy.\n"
-"�������� ������, ��� �� ������ HTTP proxy."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "����"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL ������ �� � ������� � 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "������� �� ���� ������ �� � �����"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"����, ��������� ������������ �� FTP proxy.\n"
-"�������� ������, ��� �� ������ FTP proxy."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL ������ �� ������� � 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"����, �������� ��� � ������ �� proxy, ��� ���.\n"
-"�������� ������, ��� �� ������ ���/������"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "������������� ���"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "������"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "��� ������ ������"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "�������� �� ��������. �������� ��� !"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "�� ���� �� ������� ��� ��� _����������_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "������ %s �� ���� �� ���� �������"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ��������"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid �������� (���� �� raidtools ������� ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "���� ���������� ������ �� RAID ���� %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "����� ALSA (Advanced Linux Sound Architecture) ��������� �������"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacrton - ���������� ����������� �� ������� �� ����������."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd �� �������� �� ���������� �� ��������� � ���������� ������� ����\n"
-"syslog. ���� ���� �� �� �������� �� ������� �� ��������, ������ ��������� � "
-"��������."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"����� ������� �� ���������� ��� ����� ���������� �� ��������� at � �����\n"
-"����� �� �����, ������ �������������� ������ ����������."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron � ���������� UNIX ��������, ����� ���������� ����� ���������� ��������\n"
-"�� ����������. vixie cron ������ ��������� ������������ ��� ���� �� �������\n"
-"UNIX cron, ����������� ��-����� ��������� � ����� ����������� �����."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ������ ��������� �� ����� � ��������-���������� Linux ���������� ����\n"
-"Midnight Commander. ���� ���� ��������� ���������� �� ����� �������\n"
-"����-�-���� ��������, � ������� ��������� �� �������� ������ �� ��������."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ����� ����� �� ��������, � ���������� ���������\n"
-"���/�������� �������."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache � World Wide Web (WWW) ������. ��� ����� �� ��������� �� HTML "
-"�������\n"
-"� CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (����� ������� inetd) ����� �������� �����\n"
-"�������� ������. ��� �������� �� ��������� �� ����� ������ �� ���� ��\n"
-"telnet, ftp, rsh � rlogin. ������������ �� inetd �������� ������ ������,\n"
-"�� ����� ��������."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"������ ������������ �� ������ �� Linux ���� ����� 2.2, ��\n"
-"�������� �� ��������� �����, s cel �������� �� �������� �� ��\n"
-"������� �����."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"���� ����� ������� ����������� ����������� ������� � /etc/sysconfig/"
-"keyboard.\n"
-"�� ���� �� ���� ������� � ����������� kbdconfig. ������ �� �������� "
-"������������ �� �������� ������."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"����������� ������������ �� header-��� �� ������, � /boot ��\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "����������� �������� � ��������� �� �������� ��� ����������."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf �������� ������ ������������ �� �������� ������\n"
-"��� ���������� �� ��������� �� ���������� ���������."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd � ������ �� ����� ��������� �� lpr �� ������ ��������. ��� ������ �\n"
-"������, ����� �������� �������� �� ����� �� �������(�/���)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server �� �������� �� ���������� �� ��������������������\n"
-"� ����� �������� ������."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) � Domain Name Server (DNS), ����� �� �������� �� ��������\n"
-"����� �� ����� �� IP �����."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"������� � ��������� �������� Network File System (NFS), SMB (LAN\n"
-"Manager/Windows), � NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"��������/���������� ������ ������� ����������, ��������� �� �� ������\n"
-"��� ���������� �� ��������."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS � ��������� �������� �� ����� �� ������� �� TCP/IP �����.\n"
-"���� ������ ��������� ���������������� �� NFS �������, ����� �� ���������\n"
-"���� ����� /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS � ��������� �������� �� ����� �� ������� �� TCP/IP �����.\n"
-"���� ������ ��������� ���������������� �� ������������ �� NFS ���������."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"����������� ��������� �� numlock ������� ��� ������� �\n"
-"XFree ��� ����������."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "��������� �� OKI 4w � ���������� win-��������."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ����������� ����������� �������� ���� ���� ethernet � ������ �\n"
-"laptop-�. ���� ���� �� �� �������� ����� �� ���� ��������, ���� �� �\n"
-"��-����� �� � ����� ����������� �� ������, ����� �� �� ������� �� ���."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper �� ������ � RPC ������, ����� �� ��������� �� ��������� ����\n"
-"NFS � NIS. portmap ������� ������ �� � ������ �� ������, ����� ������� ����\n"
-"������ �� ���������, ����� �� ������� �� ��������� RPC ���������."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix � Main Transport Agent (MTA), ����� � �������� ����� �������\n"
-"���� �� ������ �� ������."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"������� � ������������ ������ �� �������� �������� �� ��-������ ��������\n"
-"�� ���������� ���������� �� �����."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"������ ����� �������� � ������� ���������� (���� ������\n"
-"�� ������� ����), �� ���������� �� ���������� ���� Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"touted ������ ��������� ������� �� IP �������� ����������� ���������� ����\n"
-"RIP ���������. ������ RIP � ������ ���������� �� ����� �����, �� ��-������\n"
-"��������� �� �������� �� ����� �� ������ �����. "
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat ��������� ��������� �� ��������� ����������� �� ��������\n"
-"����������� �� ������������� �� ����� ������ �� �������."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers ��������� ��������� �� ��������� ����������� �� ���������� ��� �\n"
-"������ �� ����� ������������ ������."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho ��������� ��������� �� ���������� ����������� �� �� ������� ��� ������\n"
-"�� ������ ����������� ������ �� ������ � ������� rwho ����� (������� �� "
-"finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "�������� ��������� ������� �� �������� ��"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog � �������� ����� ����� ������ ��������� �� �������� ��������� �\n"
-"�������� �������� ������� (������). ����� � ��������� �� � ����� ��������."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "��������� �������� �� ������ USB ����������."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "�������� X Font Server (���� � ������������, �� �� ������ XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "������ ��������, ����� ������ �� �� ������ ��� ������� �� ��������"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "��������"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "��������"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "�������� �� �������"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "�������"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "���������� �������������"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "������ ����-�����"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "������: %d ���������� �� %d ������������"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "������"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "����������"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "������"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "������� � ������"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"���� ������������ ����������\n"
-"�� ���� ������, ���������."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "��� ���������"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "���������"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "������"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "�������� �� ��������� ����"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "�������� ������"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "���������� - �������"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "����������"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "��������� ������"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "������ ���������"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "���� �� SMB ������"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "����"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "���������"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "������������"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "����������� �� ������ ..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"�� ���� �� ������� ��������� �� ��������, ��������� � ��������� :(\n"
-"�� �� ������ �� �������� �� ���������� ������ ������"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "������ !"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "�� ���� �� ������ ����� �������� `%s'."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "���������� �� ����������� ����������"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "��������� �� ������������� ������"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"����, �������� �� ����� ������, ���� �� �� �������� ���� ��� ������������, "
-"��� �� ���� �����"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "������������ !"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"��������� � ������� ���������.\n"
-"���� ������ �� ���������� ������������."
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "����������"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "�������� �� ����������"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "�� �������� �� loopback ����� ?"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "��� backup-����"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "��� backup-����"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "��� backup-����"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "����� �� ������"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "����, �������� ��������, ����� ������ �� �����������."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "��������� �� ��������"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "�������� Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "������������� ���"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "����, ��������� ������� ��"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "����, �������� ������"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "����, �������� ������"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "��� ������ ������"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN ������"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "�������� ������ ��� ��������"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "����, �������� ���������� �� ������������."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "����, ������� �� ��������"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "����, �������� ��������, ����� ������ �� �����������."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "��� backup-����"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "����, ��������� ������� ��"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "��� backup-����"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "������ ���������"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "������������� ���"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "����, �������� ��������, ����� ������ �� �����������."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "����, �������� ��������� ����."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "������ �� ����������� �� ��������� ?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "������ �� ����������� �� ��������� ?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "���� ������"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Wheel"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Wheel"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "����� �� ������:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "��������� �� �������"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "����, �������� ��������, ����� ������ �� �����������."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "����, �������� ��������, ����� ������ �� �����������."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "������� �������"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "�����"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "����, �������� ������ ���� ��� ����� ������� ������� ��."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "��������� �� �������"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "��� backup-����"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "����, �������� ��� �� �������."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "��� backup-����"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "���������� �� �������"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "����, �������� ��� �� �������."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "�����"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "����������� �� ���������"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "���������� �� ����"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "���������� �� ����"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "���������"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_�����"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- ��������"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "���������"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "��� backup-����"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "���������� �� ����"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "�����"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "������ �� �����������"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "����, �������� ��������� ����."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "����, �������� ��������� ����."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "����, �������� ��������� ����."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "��� backup-����"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "��� backup-����"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "��� backup-����"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "������ ��� ����"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "����, ��������� ������� ��"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "����, �������� ��������, ����� ������ �� �����������."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "��������� �� �������"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "��������� �� �������"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "���������"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "��������� �� ������� �����"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "������� �������"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "������������ �� %s ���������. ����� �� �������� ������:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s �� � ��������"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "������"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "���������� ���������"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "��������� ������������"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "��������� ��"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "��������"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "����������� �� ������"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "������������ ������"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "��������� �� ������� �����"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "����� �� ���������"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "�������� ��������, ����� ������ �� �����������"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "����"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "�����"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "�������"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "����������� �� ���������"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "�������� ����"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "���������� �� ��������"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "�������� ���������"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "������ ������ �������!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "����������"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "������ ������ �������!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "����� �� ��������������� ��������"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "��������� �� �������� � ��������"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "����������� �� �������� ��� �������� � ���� ����������"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"����������� �� ����������� �� �������� �������� � ���������.\n"
-"� ������� � ��������.\n"
-"\n"
-"����� ������ �� ��������� ?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "�������"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "������"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "������������"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "���������� �� ������� ..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "����������� �� �������� �������� � ������� � ���������."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "����������� �� �������� �������� � ���������."
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"����������� �� ����������� �� �������� �������� � ���� ���������.\n"
-"� ������� � ���������.\n"
-"\n"
-"����� ������ �� ��������� ?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "������"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "��������� �� ������� ..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "����������� �� �������� � ������� � ��������."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"�� ��� ��� �� ��������� ��������� �� ����, �� �� ������ �������� ��������\n"
-"��. � ���� ����������, ����� �������� � ��������� �� ����� �� ����� ��\n"
-"��������� �������� �������� �� ���� ��������.\n"
-"\n"
-"����������: ������ �� ������� �� ���� ������ �������, �� �� ���������� "
-"���������� �� ����� (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "��������� %s (��������� ����� %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "��������� %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "������ ������ �������!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"� ��������� �� � ������ ethernet ������ �������. ����, ����������� "
-"����������� �� ��������� �� �������."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "������ ���������"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"� ��������� �� ��� ���� ���� �������� ������ �������:\n"
-"\n"
-"%s\n"
-"\n"
-"������ �� �������� ��������� �� ����� �� ���� �������."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"���� �������� ��� ������ ������� �� ���� ������� ��� ��������� �� �����."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "���������������� �� ������� �� � ���������"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "����������� ��������� �� CUPS"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "������� ����������� �� �������"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP �� CUPS �������"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "�������� ������� � �������� � LAN � ����������� �� %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "������� � ��������� �� ������� ����� !"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"�������� ! ������� � ��������� �� ������� �����. ���� �� �� ������ ������� "
-"����� �������� ���� ������������."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "��������� ..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"����������� ���������, ����������� �� �������, ���������� �� �������..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "�������� � ������������� �� ������ %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"������ � ���������.\n"
-"���� ������ �� ��������� �������� �������� �� � ����� �������� � ��������� "
-"�� ����� ����������� ����������� ������� ��������� (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "����������� ���� � ���������, �� � ������� � ���������."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "����������� ���� � ��������� � � ������� � ��������."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "���� ����������� ��������� �� �������� ��������."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "��������� �� ����������� �� �������� ��������"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"����� ����� � ����������� �� ��������� �� �������� �������� !\n"
-"\n"
-"%s\n"
-"\n"
-"������� ``�������'', ��� ������ �� ���������� ������������� ���������."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "��������� �� ������� (%d ��������)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "������: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "������ ������ ..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "������ �� ���������:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "��� ������ ..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"��� �� ���������� ������ (������ ������ �� ������� ���� ����� �� �������):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "��� �� ����:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "�������� ������"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "���: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "���������:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "���������:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "��������� �� �������� ������� ..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "��������� �� LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "�������"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "���������"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "��������"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "���������"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "�������� �� ������� ����� ..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "������� ���, �� �� ���������� ���������� ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "���������..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "�������"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "����, ��������� ... ��������� �� �����������"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "�������"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "�� �������"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "��������� ..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "���������� ..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"������ �������� ���������.\n"
-"��������� �� ����� ����, ���� ������� �� '���������'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "��������� �� ������� �����"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "������� %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "��������� ��������"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "������ ��� ����������"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP ������"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "��������� ����"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "����������� ����"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"������ Internet ������.\n"
-"�������� ������, ���� ������� �� '�������'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "��������� �� �������� ������"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "��������� �� �������� ������"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "��� �� ��������: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "���������"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet �����"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP ������"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "�������� ���� �� ���������"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "��������� ������"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "�������� �����������, ����� ������ �� ����������"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "�������� (������)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "������"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "���������"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "������"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "�������"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "��������: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "����, �������� ���������� �� ������������."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "������ �� BackSpace �� ������ Delete �� ��������� ?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "����� �� CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"����, ������� �������������� CD-ROM � ������������ � ��������� Ok, ������ "
-"��� ������.\n"
-"��� �� ������, ��������� ������, �� �� ��������� ������������� �� ���� CD-"
-"ROM."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "�� ���� �� ����� ������������ !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "��������"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/����/_���"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<�������>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/����/_������"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<�������>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/����/_�����"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<�������>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/����/������ _����"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/����/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_�����"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/�����/����"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_�����"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/�����/_��..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "������������� ���"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "���������"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "�������� ���"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "�����"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "���������� �� ����������� �� ������ ��� �������"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "���������"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "����������"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "�� �� �������"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "�������� ����"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "��������"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "���������� �� �����"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, fuzzy, c-format
-msgid "please wait, parsing file: %s"
-msgstr "���� ���������, ����� ������ �� ����: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "��������� �� LILO/Grub"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"����� ����� � ����������� �� Proxy.\n"
-"\n"
-"��� �� ������ �� ���������� ������ HTTP � FTP proxy\n"
-"��� ��� ��� ������������� ��� � ������\n"
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache � Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "shadow"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "�����"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "���������"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "�����������"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "��������� �� �������"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "������ ����..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "����, �������� ��� �� �������."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "�� � ������� serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "�� ��������� �� ����� ����� ?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "�������� �������� �����"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "���������� ����������"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "��������� �� ������� �����"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "��������� �� ������� �����"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"������� �����\n"
-"\n"
-"���� ��� ��������� ������� �����.\n"
-"������� �������, �� �� ���������� ���������� ������� �����"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"������� �����\n"
-"\n"
-"������� �������, �� �� ���������� ���������� ������� �����"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "����� �� ����"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "����� �� ���� ����������"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "�������� �� ���������"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "��������� �� �����"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "����� �� ����������"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "���������"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "������� �������"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "����������� �� ������"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "������ �� �����������"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "����������� �� ���������"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "�������� �� ����������"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "�������� �� �������"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "��������� �� ��������"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "����������� �� bootloader"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "��������� �� boot-�������"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "��������� �� �"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "����������� �� ���������"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "����� �� ��������������� ��������"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"���������� �� ����� ������� �����\n"
-"\n"
-"���� ��������� ���������� ������� ����� �� ���� Mandrake Linux ������.\n"
-"�� ����� ���������� �� �������� �������, ����, ���������� ����������������\n"
-"MandrakeSecurity Firewall �����������."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"���� �� �� ������� ������� �� ����, ��� ��� ������ ����� ������ ��\n"
-"��������� �� �������� �� �������. ����, ��������� ���������� ��\n"
-"���� �������, ��� ���� ����������� �� ��������� �� � �����.\n"
-"\n"
-"����, ��� � ������� �� ���������� ����� �� ��������, �������� �.\n"
-"������ �� ��������� ����������� �� ����� �����, ��� ������, ����\n"
-"���������� ������ ���� ���������� !"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"���������� �� Web ������ �� ���� ������, ����� ������ ������ ��������\n"
-"�� ����� ? ��� ����������, ����� ������ �� ���� �������� �� ���� ������,\n"
-"������ �������� �� ���������� � �� ���.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"���������� �� Name ������ �� ���� ������ ? ��� �� ������ �� ������������\n"
-"���������� �� IP-�� � ���� �� ����� ��������, ����, ���������� ��.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"������ �� �� ��������� ������� Secure SHell (SSH) ������ ? ���� �\n"
-"���������� �� telnet, ����� ������ �� ���������� �� �������. ��� �\n"
-"������� ���������� telnet, ���������� ������ �� ��������� ��� SSH.\n"
-"Telnet �� � ��������� -- ���� �� ����� ��������� ����� �� ���������\n"
-"�������� ��, ��� �� ����������. SSH � ��������� � �������� ������\n"
-"�������."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"������ �� �� ��������� ������� telnet ������ ?\n"
-"���� � ������ ���������, ����� ��������� � ��������� �����. �����\n"
-"�� ������������ �� ���������� �� ��� � �� ���������� SSH ������\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"����� �� FTP ������ ���, ����� ������ �� � �������� �� �������� ?\n"
-"��� �����, ����� �� ������������ �� �� ���������� �� �������� ���������.\n"
-"������ ������ ��������� �� FTP ����� �� ����� ���������� �� ���������\n"
-"�������, ��� ���� FTP �� �������� ������������ �� ������������� ��.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"����� �� �������� ������ ��� ? ��� ��������� ����������� ��\n"
-"���� pine, mutt ��� ������� � �� � ���� ������� �������� ������,\n"
-"���� �� �����. � �������� ������, ������ �� �������� ����.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"����� �� POP ��� IMAP ������ ��� ? ���� ���� �� ����\n"
-"���������� �� ���������� �� ��-web-�������� �������� �������\n"
-"���� ���� ������.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"����� ���������� 2.2 ����. ��� ��������� IP ����������� ��\n"
-"�������� �� �������� � ��� ��� � ����� (��������� ���������),\n"
-"������ �� �������� ����. ����� �� � ������ ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"������� �� ��������� �� ������������ �� �� � ���� �������� ?\n"
-"���� ������ �� �������� � ������-������ Unix/Linux �����������,\n"
-"�� �� �� ������������ ������� �� ��������� �� ������� � ������ ������.\n"
-"��� �� ��� ���� �� ��-����� ���� � �� ��� ������ �� ������ ����,\n"
-"���� �� �� �� ������."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"����������� ���������. �� ������� �� ��������� �� ����� ?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "�� ���� �� ������ %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "�� ���� �� ������ %s �� �����: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "��������� �� ������� �����"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "����, ���������, ���������� �� ������������"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "������, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "������ �������� (������)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS ������, SMB ������, Proxy ������, SSH ������"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "����"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome ������� �������"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "����������� �� ����� Palm Pilot ��� Visor-� ��"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "������� �������"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "������, Firewall/�����"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "��� �� ������ � ������ ������������� ������"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"���� ��������: word-��������� (kword, abiword), ������� (kspread, gnumeric), "
-"������� �� PDF, � �.�."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "����������� �� �����: MP3 ��� MIDI �������, �������, � �.�. "
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "����� � HOTWO-�� �� Linux � ��������� �������"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE ������� �������"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm � �.�."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "���������� - �����"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "����� �� ����������� �� ����, ������, web, ������ ��������, � ���"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "������, ����-�����"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ��� MySQL ������ �� ����-�����"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "����������� �� ���������� ����������� �� ��������� ��"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "��������� - ����"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "�����������"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "������������"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "�������� �����������"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix �������� ������, Inn ���������� ������"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "�������� �������"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "����������� �������"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "���������"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "��� �������� desktop-� (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment, ������ ����� � �������� �� ������������ "
-"�����������"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "�������� �����"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache � Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "����������� �� ��������� � ������� �� CD-��"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "������ ������� �������"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "������"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, � �.�."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "�������� �������� ���� The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "FND/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "���������� �� ���������� �� C � C++, �������� � include �������"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "������ ��������, ������"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "������, ����/Groupware/������"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "������� �������"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "����� ������� � ���������"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "���������� - �������"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "������� ��������: ������� ����, ���� �� ����, ��������� � �.�."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"����� �� ����������� �� ������ � ��������� �� ���� � ������ (pine, mutt, "
-"tin..) � �� ��������� �� �������"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "����������, ��������, ����������"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "����� �������"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"�������� ����� � ������������� ����� �� ���������� � desktop �����������"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "������� �� �������� ��������� ����������� SSH"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "�������� gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "�������� �� �������/��������� �� ���� � �����"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "����� �������� desktop-�"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "���������, ������, ������� �����������, ���������"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "�������� �� ��������� �� �������, ���� gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "��������� �� ����� ����������"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "���������� - ������� �� CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "������ ������� �������"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "�����"
-
-#, fuzzy
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "�� ���� �� ��������� ������ �� �������� �� ������ ������������ �� ������ "
-#~ "�� (������ %s ������)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "�������"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "�������� ������� �� ������������"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "���������/��������� �� ����������"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "���� ������ �� �������� ������� �� ��� ������ %s."
-
-#~ msgid "mount failed"
-#~ msgstr "����������� �� ����"
-
-#~ msgid "Low"
-#~ msgstr "�����"
-
-#~ msgid "Medium"
-#~ msgstr "�������"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "����� ���������� �� ���� ���� �� ���������. �������� �, �� ��� ������\n"
-#~ "�������������� � �������� �� ���������."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "����������"
-
-#~ msgid "Boot mode"
-#~ msgstr "����� �� ����������"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "���������"
-
-#, fuzzy
-#~ msgid ""
-#~ "To know about the options available for the current printer read either "
-#~ "the list shown below or click on the \"Print option list\" button. %s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "�� �� ������ ������ �� ���������� ����� �� ������� �������, ��� ��������� "
-#~ "������� ������� ��-���� ��� ������� �� ������ \"������ � ����� �� �����"
-#~ "\".\n"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux ������ � ����� �� GMT (����� �� �������)\n"
-#~ "� �� �������� � ������� ����� � ���������� �� ������, ����� ��� �������."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "������ �� ��� ��������"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "������� �� �� ��������"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "��������� �� ��������� ������ (LAN ��� ��������)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "�� ��� ���� ������ �� �� ���������� ?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "����, �������� ��������, ����� ������ �� �����������."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "����������"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome ������� �������"
-
-#~ msgid "authentification"
-#~ msgstr "��������������"
-
-#~ msgid "user"
-#~ msgstr "����������"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server.  It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "Apache � World Wide Web (WWW) ������. ��� ����� �� ��������� �� HTML "
-#~ "�������\n"
-#~ "� CGI."
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) � Domain Name Server (DNS), ����� �� �������� �� ��������\n"
-#~ "����� �� ����� �� IP �����."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "����, �������� ��� �� �������."
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "������� �� �������� NFS ��������� �������"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "������� �� �������� NFS ������� �� ������ %s"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "��������� �� ���������� SAMBA �������� �������"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "��������� �� ���������� SAMBA �������� ������� �� ������ %s"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "�����"
-
-#~ msgid "Removable media"
-#~ msgstr "������� �������"
-
-#~ msgid "Active"
-#~ msgstr "���������"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "��"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "������� �� ������ \"%s\", � ������� �� "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "������� �������� ����������"
-
-#~ msgid "Printer Device"
-#~ msgstr "�������� ����������"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "������ ��� �� ����������/���� !"
-
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "�������(�) �� ���������(�) CUPS ������(�)"
-
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "�������(�) �� ���������(�) ������(�)"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "�������"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "�����"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "����, �������� ���������� �� ������������."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "����, ������� �� ��������"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "���: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "��� backup-����"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "��������� �� �"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "�������� ����������"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "������"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Ok"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "�������"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "���������� �� �������� ...."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "��������� �� �������� �� ..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "�������� �� � ���������.\n"
-#~ "�������� �� �� �� ��������� �����, ���� ����������\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "���� root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "��������� � ������� �� � ��������."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "�������� ����������, ����� ������ �� �����������"
-
-#~ msgid "Total size: "
-#~ msgstr "���� ��������: "
-
-#~ msgid "Please wait, "
-#~ msgstr "����, ���������, "
-
-#~ msgid "Total time "
-#~ msgstr "���� ��������������� "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "�� ��������� �� ��������� ��������� �� X11 ?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "���� � ������� ����� �������  \n"
-#~ "(���������: /dev/lp0 � ������������ �� LPT1) ?\n"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr "��������, ��������� ������� ���� � ��������. �� �� ����������."
-
-#~ msgid "New"
-#~ msgstr "���"
-
-#~ msgid "Remote"
-#~ msgstr "���������"
-
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr ""
-#~ "����, ������� �� ������ ��-����\n"
-#~ "\n"
-#~ "��� ����������� \"���\""
-
-#~ msgid "Use \"New\""
-#~ msgstr "����������� \"���\""
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr "��� �������� ��-���� �� ������� ������� �������, �������� �� ���:"
-
-#~ msgid "Shared resource"
-#~ msgstr "�������� �������"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "..... (%s), ������ ��-�����\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (�� ������������ � %s)"
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "������ ����� ? (�� ������������ %s, �������� 'none' �� �����)"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "�� ���� �� ������ /etc/sysconfig/autologin �� ������: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "������ �� �� ����������� ������� ?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "�������� �� ��� ?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "�� ��� ��� �� ����������� ��������� ����������:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr ""
-#~ "�� ��� ��� �� ����������� ��������� ���������� %s. �������� �� ��� ?"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "����� ��� �� ��� ������� � ���������, ����������� ����� � \"/dev/hda\"\n"
-#~ "(����� ������ IDE ����) ��� \"/dev/sda\" (����� SCSI ����)."
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "�������� �������� �� ���������.\n"
-#~ "������ �������� ��� ��� �� ��������� ��������������."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "��� ����������, �� ���� %s ������� ��"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "��������:\n"
-#~ "���������� �� �������� �� ����� �� ������ ���� �� ������ X ������� ��."
-
-#~ msgid "%s is already in use"
-#~ msgstr "�������� %s �� �������� ����"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(���� �� ������� ������ �� �����)"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "������ �� �������� �������� ��� !"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "��������� �� ADSL"
-
-#~ msgid "Adapter"
-#~ msgstr "�������"
-
-#~ msgid "Add location of packages"
-#~ msgstr "������ ����� �� ��������"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "���� ����������� �� ������ ������,"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "����� Alcatel"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "������� �� ���, �� ��� ������� ?\n"
-#~ "��� �� �� ����� ��������� �����, �� ������ ����.\n"
-#~ "��� �� ���� ������� ������: ``Use shadow file for passwords?'',\n"
-#~ "�� ������ �� �� �� �������� � ����������?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "����������� ����������� �� �����"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "����������� �����������"
-
-#~ msgid "Available packages"
-#~ msgstr "������� ������"
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "��������, ��� � ������� numlock ���� �� ������ �� ����������� ��\n"
-#~ "����� ������ ����� (��������: ���������� 'p' ���� '6')"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "��������� �� ������ �� ����������"
-
-#~ msgid "CUPS starting"
-#~ msgstr "���������� �� CUPS"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "�� ���� �� ���������� supermount ��� ������ ���� �� ���������"
-
-#~ msgid "Category"
-#~ msgstr "���������"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "��� (IRC ��� �������� ���������) �������� ���� xchat, licq, gaim � "
-#~ "����������� �� �������� �� �������"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "���������� �������������"
-
-#~ msgid "Choice"
-#~ msgstr "�����"
-
-#~ msgid "Choose"
-#~ msgstr "������"
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "�������� ������ �� ������������ �� �� ������� ��-����"
-
-#~ msgid "Collapse all"
-#~ msgstr "������� ������"
-
-#~ msgid "Color depth options"
-#~ msgstr "����� �� ��������� �� �����"
-
-#~ msgid "Command line"
-#~ msgstr "�������� ���"
-
-#~ msgid "Communication facilities"
-#~ msgstr "����������� �� �����������"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "������������ �� ������������ ���� �� ���� �� ���� ��������."
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "��������� �� Lilo/Grub"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "��������� �� LILO/GRUB"
-
-#~ msgid "Configure local network"
-#~ msgstr "�������� �� ��������� �����"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "��������� �� �������� �������� / ��������� �� ��������� �����"
-
-#~ msgid "Configure timezone"
-#~ msgstr "��������� �� ������ ����"
-
-#~ msgid "Configure..."
-#~ msgstr "������� ..."
-
-#~ msgid "Confirm Password"
-#~ msgstr "������������ �� ��������"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "��������� ��� �������� "
-
-#~ msgid "Connection Time: "
-#~ msgstr "����� �� ��������: "
-
-#~ msgid "Connection complete."
-#~ msgstr "����������� ���������."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "����������� �� ����.\n"
-#~ "��������� ����������� � Mandrake Control Center."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Timeout �� �������� (� ���) [ ����, �� � ������� ]"
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "�� ����� �� �������� \"%s\" �� �������� �� ������������ !"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "��������� �� boot-�������"
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "����������� �� boot ������� � ����� ��������������. ��� ��\n"
-#~ "������ �� ���������� ��������� ��, ���� � ����������� ����� ��\n"
-#~ "������� ��������� ��� �������������."
-
-#~ msgid "Customized"
-#~ msgstr "��������������"
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "����� (�����������)"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "������, DNS/DHCP "
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (��� ADSL) ������"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "������� � ������ �� ���� ����� (MySQL � PostgreSQL)"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Runlevel �� ������������"
-
-#~ msgid "Development C/C++"
-#~ msgstr "���������� �� C/C++"
-
-#~ msgid "Development, Database"
-#~ msgstr "����������, ����-�����"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "����������, ����������� �����"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "����������, ���������� �����������"
-
-#~ msgid "Directory"
-#~ msgstr "����������"
-
-#~ msgid "Disable"
-#~ msgstr "�������"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "���������� �� �������� ������"
-
-#~ msgid "Disable network"
-#~ msgstr "���������� �� �������"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "���������� �� �������� "
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "������������ �� �������� ���������."
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "������������ �� �������� �� ����."
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "������ �� �� ������ ����������� ����������� ������� �� Linux ����������?"
-
-#~ msgid "ECI modem"
-#~ msgstr "����� ECI"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "��������� ���������� ���� ����� ?"
-
-#~ msgid "Enable"
-#~ msgstr "������"
-
-#~ msgid "Enable network"
-#~ msgstr "��������� �� �������"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "����������� Num Lock-� ��� ���������"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "����� ������ �� ����� (������ �� �������� �������� �� �����) �� ������\n"
-#~ "�� ��� (���������� lp) � spool-���������� ��������� � ���. ���\n"
-#~ "��� �� ���������� �� ���� ���������� �� ���� ������ � ��� �� ������� "
-#~ "�������� ?"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "����� ������� �� ������ �� ��� (��������, \"lp\").\n"
-#~ "����� ��������� ���� �������� �� �������� ��� ���������������� �� ����� "
-#~ "��\n"
-#~ "����� ����������. ����� ��� �� ���� ���������� �� ���� ������� �\n"
-#~ "��� � ������� ��� ?"
-
-#~ msgid "Expand all"
-#~ msgstr "������� ������"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "������������ GhostScript �����"
-
-#~ msgid "Extra Text options"
-#~ msgstr "������������ ����� �� �����"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "������, ������/���������/Samba"
-
-#~ msgid "Find Package"
-#~ msgstr "������ �����"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "������ ����� �������� ����"
-
-#~ msgid "Finding leaves"
-#~ msgstr "�������� �� �������"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "���������� �� ����� ������ ����� �����"
-
-#~ msgid "First DNS Server"
-#~ msgstr "����� DNS ������"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "�������� �� stair-stepping ����� ?"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "�� FTP � HTTP, �� ������ �� ������ ����� �� hdlist\n"
-#~ "�� ������ �� ������� �� URL-�� ������"
-
-#~ msgid "Format all"
-#~ msgstr "���������� ������"
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux ���� �� �������� ������� ���� ��������. ����� �� ���� ������\n"
-#~ "������� �������� ���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ��������� � ��������� ������� ��� ��������� ��, �������� \"�������\n"
-#~ "�������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ������ ������ �� ������� ������� �� �� ���������� Unix ������, "
-#~ "��������\n"
-#~ "\"��������� �������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ������ ������ �� ������� ������� �� �� ���������� Microsoft Windows "
-#~ "������\n"
-#~ "(��� �� Unix ������ ���������� SMB ��������), �������� \"SMB/Windows "
-#~ "95/98/NT\"."
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "����� ��� (����.: `extra', `commercial')"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "���������� �� ������ %s"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "��������� �� �������"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "��� ������ �� �� �������� ��� �������� ?"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "������� ISDN �����:\n"
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "��� ���� �� � ����� � ����������� �� X, ����������� ���� ����� ��\n"
-#~ "�������� ��������� �� X Window ���������."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "��� �� ��� ������� ���� ������������ ��-���� � �����\n"
-#~ "��� ��� �� ������ ��� �� ��� ������� ����� �� ��������, ����� ����������\n"
-#~ "���� �� ���� ����� �� �������� ���������� ��. ��� �� �������� ���������� "
-#~ "��\n"
-#~ "DNS (name server), �� �� ���� ����� �� �������� ���������� �� �� ����� "
-#~ "��\n"
-#~ "���������."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "��� ����� ������ CD-�� �� ������� ��-����, ��������� Ok. ��� ������\n"
-#~ "���� ���� �� ���� CD-��, ��������� ������. ��� �� ������� ����� CD-��, "
-#~ "��������� ��,\n"
-#~ "� ��������� Ok."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "��� ������������ �� ���������� �������� �������, �������� \"��\". �\n"
-#~ "�������� ������, �������� \"��\"."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "��� �� ���������� proxy �������, ����, ��������� �� ����. ��� ��������,\n"
-#~ "��������� �������� ������������� ��� �������� ���������� ��."
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "��� ������ ����� ����� (����� ����, ����� �������� �����\n"
-#~ "�������� �� ������������), ����� �� ����� �������� ���� ������������, "
-#~ "����, ��������\n"
-#~ "�� �� ������� ��-����. ��� ������ �� �� �������� ������, ������ �������� "
-#~ "\"������\"."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "��� ������ �� ������ �� ��������, ����, �������� ������� �� ����� "
-#~ "�������\n"
-#~ "CUPS � LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS � ����, ����� � ������� ������� �� ����� �� Unix ������� (CUPS\n"
-#~ "��������� �� \"���� Unix ������� �������\"). ���� � ��������� �� ����� �� "
-#~ "������������ �\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR � ������� ������� �� �����, ���������� ���������� Mandrake Linux "
-#~ "�����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ������ �������, ������� \"�������\"."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "��� ������ �� �������� ��������� �� ��� �������� ��� ���\n"
-#~ "������� �����, ����, �������� ����������� �����. ����, �������� "
-#~ "������������\n"
-#~ "����� �� �������� ����������� �����, �� �� ��������� �� DrakX �� �� "
-#~ "������ �����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ������ ������� ������ ��� �������� ��� ��� ������� �����, ��������\n"
-#~ "\"���������� �� �������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ������ �� ��������� ������� ��-�����, ���� ������������, ��� ��� "
-#~ "���������� � ����������� �� �������, �������� \"������\"."
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "��� ADSL ������� �� � Alcatel, �������� Alcatel. �����, �������� ECI."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "��� ������� �� � ������, ����, �������� �� ����, �� �� ��������� �� DrakX "
-#~ "�� �� ������ �����������."
-
-#~ msgid ""
-#~ "If your network uses the LDAP (or NIS) protocol for authentication, "
-#~ "select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "��� ������� �� �������� LDAP (��� NIS) �������� �� �����������, ��������\n"
-#~ "\"LDAP\" (��� \"NIS\") �� �����������. ��� �� ������, ��������� �������� "
-#~ "��\n"
-#~ "�������������.\n"
-#~ "\n"
-#~ "��� ���������� �� �� � ������� ��� �������������� �����, ���� �� �� "
-#~ "������\n"
-#~ "�� �������� \"������� �������\" �� �����������."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "��� ������� �� �������� NIS, �������� \"��������� NIS\". ��� �� ������,\n"
-#~ "��������� �������� �������������."
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "� ��� ������ �� �������� ?"
-
-#~ msgid "Installed packages"
-#~ msgstr "����������� ������"
-
-#~ msgid "Internet Tools"
-#~ msgstr "�������� �����������"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "��������/������ ������"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "�������� ����� �� LILO � GRUB ��:\n"
-#~ "  - Boot ����������: �������� ����� �� ������������ (�.�. ��� �� ����\n"
-#~ "�����), ����� ������� boot �������. �������� \"/dev/hda\", ����� ��� ��\n"
-#~ "��� ������� � �����.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ��������� ����� ���������� �� ������������� �� �����: �������� "
-#~ "��������\n"
-#~ "�� ���������, ����� ��������� �������� �� ������ ����� ��������� �� "
-#~ "������\n"
-#~ "�����. ������� � �� �������, ����� ��������� �� ����� ������� ���� "
-#~ "���������\n"
-#~ "�� ������������. ����������� �������� �� ����, ��� \"delay\" �\n"
-#~ "��������� ��� � ����.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ����� �����: ���� �������� ��������� VGA �����, ����� �� ���� ������\n"
-#~ "��� ������� ���������. �������� �� �������� ���������:\n"
-#~ "    * normal: ������ ��������� 80x25 ������� �����.\n"
-#~ "\n"
-#~ "    * <number>: �������� ���������� ������� �����.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ���������� �� \"/tmp\" ��� ���������: ��� ������ �� �� �������� "
-#~ "������\n"
-#~ "������� � ���������� ����������� � \"/tmp\", ������ ��������� ��������� "
-#~ "��,\n"
-#~ "�������� ���� �����.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ����� RAM, ��� � �����: �� ���������, ���� ���������� �����, �� ��\n"
-#~ "������ BIOS �� ����� �� RAM � ���������. ���� �����������, GNU/Linux "
-#~ "����\n"
-#~ "�� �� ����� �� ������ �������� ����� �� RAM. ��� � ����� ������, ���\n"
-#~ "������ �� �������� ������ ���� �� RAM. ����, ���������� �� �� 2 ��� 4 MB\n"
-#~ "����� ���������� � ������������� RAM � ��������."
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "��������� ����� ���� � ���������.\n"
-#~ "������ �� ��:"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "������������"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "������������ �������"
-
-#~ msgid "Modify printer"
-#~ msgstr "������� �������"
-
-#~ msgid "Name of queue"
-#~ msgstr "��� �� ������"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "��� �� ���������� ������:"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "����������� �� �������"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "������ ������� 1 (eth0):"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "���� CDROM (���� ���� � /mnt/cdrom)"
-
-#~ msgid "No match"
-#~ msgstr "���� ����������"
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "�� ���� ������ �����. ����, �������� �������� ����, ��� ����� � �������.\n"
-#~ "\n"
-#~ "\n"
-#~ "�� ����������, ������� ������ ���� (������� \"COM1\" ��� Microsoft\n"
-#~ "Windows) �� ������ \"ttyS0\" ��� Linux."
-
-#~ msgid "No more match"
-#~ msgstr "���� ������ ����������"
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "���� � ����� �� ��������� X Window System, ����� � ������ �� \n"
-#~ "GNU/Linux GUI (�������� ������������ ���������). �� ���� ��� ������ ��\n"
-#~ "��������� ������������ � �������� ��. ��-�������� ���� �� �������� ��\n"
-#~ "��������������, ���� �� �������� �� ���� �� �� �� ������ ���� �� "
-#~ "��������\n"
-#~ "����� � ��������� � ���������� �� ����������� :)\n"
-#~ "\n"
-#~ "\n"
-#~ "������ ����������� �������, X �� ���� ��������� (����� ��� �� ������� ��\n"
-#~ "DrakX �� �� �� �����), �� �� ��������� ���� ����������� �� ���������. "
-#~ "���\n"
-#~ "�� �� ���������, ������ �� �� ������� � �� �� ���������, ������� ���� ��\n"
-#~ "� ����������."
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "����, ���� ���� �������� �������� �� � ���������,\n"
-#~ "���������� �� ���� �� ���� �������� �� ������� �������� �������� ��.\n"
-#~ "����������: �� ���� �� ������ ��������� ������� ������ �������, �� �� "
-#~ "���������� ���������� �� ����� (LAN).\n"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "���� �������� �� ������� ��������"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "�������� �� �������� �� ..."
-
-#~ msgid "Other countries"
-#~ msgstr "����� ������"
-
-#~ msgid "Package"
-#~ msgstr "������"
-
-#~ msgid "Paper Size"
-#~ msgstr "������ �� ��������"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "�������� ����������� ���� �� ���������� � �������� ����������."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "����, �������� ��������� �� �������� �� ��������.\n"
-#~ "����, ���������� ��������������, ��� �� ������ ����� �� �������� ���.\n"
-#~ "\n"
-#~ "\n"
-#~ "�� ������ �� ���������� ����������� � ���������� ������ � �� � �������, "
-#~ "��� �� ������ ����� ������."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "����, ��������� �������� ����������"
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "����, �������� ������ �� � �������� ����������."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "����, �������� �������� �� ����� �� ����������, �� �� ��������� �� DrakX "
-#~ "��\n"
-#~ "�� ������.\n"
-#~ "\n"
-#~ "������ �� �������� ������� ���������� ���.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ��� �� �������: �� ������������, �������� spooler �������� \"lp\" "
-#~ "���� ��� �� �������. ���� �� ������ �� �����\n"
-#~ "������� ������� \"lp\".\n"
-#~ "     ��� ����� ���� ���� �������, ������ �� ���������� ������� ����� �� "
-#~ "����. ������ ���� �� �� �������� � pipe\n"
-#~ "     ������� (\"|\"). ���� ��, ��� ������������ ��-�������� ���, ������ "
-#~ "�� �� ������� �����, ����. \"My printer|lp\".\n"
-#~ "     ��������� �������� \"lp\" � �����(���) �� �� �� ������ �� "
-#~ "������������.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ��������: ���� � ��������������, �� ���� �� � �������, ��� ��� "
-#~ "������� �������� �������� ��� ��������� �� ��� ���\n"
-#~ "     ����������� ������ �� ���� �� ����� ��������.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ��������������: ��� ������ �� ������ ���������� �� ����������������\n"
-#~ "     �� �������� ��, ��������� �� ��� (������ �� �������� ������� �� "
-#~ "������,\n"
-#~ "     �������� \"2-�� ����\").\n"
-
-#~ msgid "Press next to continue."
-#~ msgstr "��������� �������, �� �� ����������."
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "������� ������ ���� PostScript ?"
-
-#~ msgid "Profile "
-#~ msgstr "������ "
-
-#~ msgid "Provider dns 1"
-#~ msgstr "1-�� DNS �� ����������"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "2-�� DNS �� ����������"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, ����������, �����������"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "������� �� ��������: "
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "���������� ����������� ��������� ..."
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Reload"
-#~ msgstr "������������"
-
-#~ msgid "Remote queue"
-#~ msgstr "���������� ��� �� ������"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "������ ��� �� �������� !"
-
-#~ msgid "Reverse page order"
-#~ msgstr "������ ���� �� ����������"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "�����/��� ���� � ����� (1/72 �� ���)"
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO � bootloader �� SPARC: �o� ���� �� ��������\n"
-#~ "GNU/Linux ��� ��� �� � ����� ����������� �������, ������������ �� "
-#~ "��������� ��.\n"
-#~ "�����������, ���� ����� ����������� ������� �� ������� � ����������\n"
-#~ "��������. ��� ���� �� ����� ��� ���, ������ �� �������� ������ �� ���� �\n"
-#~ "���� �����. �������� �� �������� ����� ���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "���� �� �� ������ �� ������ ������ �� ���� ����������� ������� �� �����,\n"
-#~ "� ����� ������ ������ �� �������� ����������� ������. �� � ����� ������,\n"
-#~ "�� �� �������� �� boot-�������, �� �� �� ���������� !"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "�������� ����� �� SILO ��:\n"
-#~ "  - bootloader ����������: �������, ������ ������ �� ��������� "
-#~ "������������\n"
-#~ "���������� �� ������������ �� GNU/Linux. ����� ��� �� ������ ����� �����\n"
-#~ "�������, �������� \"����� ������ �� ������������ (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ��������� ����� ���������� �� ������������� �� �����: �������� "
-#~ "��������\n"
-#~ "�� ���������, ����� ��������� �������� �� ������ ����� ��������� �� "
-#~ "������\n"
-#~ "�����. ������� � �� �������, ����� ��������� �� ����� ������� ���� ����\n"
-#~ "�� ������ ������������. ����������� �������� �� ����, ��� \"delay\" �\n"
-#~ "��������� ��� � ����."
-
-#~ msgid "Sciences"
-#~ msgstr "�����"
-
-#~ msgid "Scientific applications"
-#~ msgstr "������ ����������"
-
-#~ msgid "Search"
-#~ msgstr "�����"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "����� DNS ������"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "�������� ������ ��� ����������� �������"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "�������� �������, ����� ������ �� ����������"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "��������:\n"
-#~ "\n"
-#~ "  - ��������������: ��� ��� ���������� �������� � GNU/Linux, �� ������ �� "
-#~ "��������\n"
-#~ "    �������� �������������� �� �������� ��. ����� ��-���� �� "
-#~ "�����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ���������: ���� ����������, �� ��� �� \"��\" � GNU/Linux � ������ ��\n"
-#~ "    ��������� ������ �������������� ����������. ����� � � "
-#~ "\"���������������\"\n"
-#~ "    ������������� ����, �� ������ �� �������� ���������� �� ��������� "
-#~ "��.\n"
-#~ "    �� ����, ����, �� ��������� ����, ����� ��� �� ������ ����� �������!"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "�������� �������� %d%s"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "������� �� ���������: "
-
-#~ msgid "Show only leaves"
-#~ msgstr "������ ���� �������"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "�������� (�����������)"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "���������, ����������� �� ������ ��� �� � ��������. ������ ���������."
-
-#~ msgid "Sort by"
-#~ msgstr "�������� ��"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spool-����������"
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler: "
-
-#~ msgid "Statistics"
-#~ msgstr "����������"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "����������� ������� �� ���."
-
-#~ msgid ""
-#~ "The Mandrake Linux spreads among several CDROMs. It may be that drakX "
-#~ "has\n"
-#~ "selected packages on another CDROM than the installation CDROM, and when "
-#~ "it\n"
-#~ "needs that you put another one into the drive, it will eject the current "
-#~ "CDROM\n"
-#~ "and ask you for another one."
-#~ msgstr ""
-#~ "Mandrake Linux � ���������� �� ������� CDROM-�. ���� �� �� �����, �� "
-#~ "DrakX\n"
-#~ "� ������ ������ �� CDROM, �������� �� �������������� CDROM, �, ������ ��\n"
-#~ "�������� �� �� ������� � ������������, ��� �� ������ ������� CDROM � �� "
-#~ "��\n"
-#~ "������ ����."
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "�������� ������ �� ����� �������������"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "���� ������� ������ �� ������ �� ������ ������ usb ������� ��."
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "�� ��-������� �������, ������ �� �������� \"��������� shadow ����\"\n"
-#~ "� \"��������� MD5 ������\"."
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "������������ ����� ���������� � �������"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "�����/����� ���� � ����� (1/72 �� ���)"
-
-#~ msgid "Tree"
-#~ msgstr "�����"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "�� �� ������ �� �� ������ ����� ?"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL �� ������������ ��������� RPM"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "����� �� Uniprint �������"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "����������� ���������� ����"
-
-#~ msgid "Update location"
-#~ msgstr "������ �������"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "���������� �� RPM ������"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "��������� MD5 ������"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "��������� diskdrake"
-
-#~ msgid "Use shadow file"
-#~ msgstr "��������� shadow ����"
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "����� ����� � ���������� �� ������� ���������.\n"
-#~ "��� ���������� ������ �� ��������� ?\n"
-
-#~ msgid "What are looking for?"
-#~ msgstr "����� ������?"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "�� ����� �� ���������� ��������� �� ?"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "����� �������� �� ������� ��������� ������ �� ����������?"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "��� ���� �������?"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "��� ����� ������"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "��� ��� ������ ���� � �������� ������� �� ?"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "� ��������� CUPS ������, �� �� �� ������ �� ����������� �������\n"
-#~ "� �� ���� ������� ���; ���������� ���� �� ����� ��������,\n"
-#~ "����� ��� ������ ������ �� ����� �����; � ��������� ������,\n"
-#~ "�� ������ �� ������������ IP ����� � ���������� ���� ��\n"
-#~ "CUPS �������."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "������ /etc/fstab"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "��, ��������� ASCII ������� ��������"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "��, ��������� PostScript ������� ��������"
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "������ �� �������� ���� �� ��������� �� ��������� ��. ����, �������� �� "
-#~ "��� ������������� ��\n"
-#~ "����������. ��������, ��� �� ������ ����� �� ��������, �������� ���� �� "
-#~ "������������.\n"
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "������ �� ��������� ������� ������� (������� ��� �������� ��) ��� "
-#~ "���������\n"
-#~ "������� (�������� ���� Unix, Netware ��� Microsoft Windows �����)."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "������ �� ����������� ������������� ������, ��� �������� �������� �� �\n"
-#~ "�������� ����� ������. ����� �������� ��������� ����, �� ������ ������ �� "
-#~ "���������\n"
-#~ "������, ���� ���� ���������� �������� �� �����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "����������, �� ������ �� �������� ��������� ���� � ������������� ������,\n"
-#~ "��������� ������ ���������������."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "���� ������ �� �������� ��������� ������ ������, �����\n"
-#~ "������ �� �����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "������ �� ��������� ��� ������ �������, ���� ������� �� ������� � ����� "
-#~ "����\n"
-#~ "�� ��������� � ��������.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ������������ �� ������ �������� ��������� � ������� ���, ������� ��\n"
-#~ "������� \"������������ ����� ����������� � ��������� �� �����\".\n"
-#~ "\n"
-#~ "\n"
-#~ "��� �� ������ �� ������ ��������������� �� �����������, ������� "
-#~ "\"����������� �����������\".\n"
-#~ "��� ��������� ����, ���������� �� ������������ �� ���� ����� ���� "
-#~ "����������\n"
-#~ "�� ������� ����� ����� ������, ����� ������� �� ����."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "���� ������ �� �������� root �������� �� Mandrake Linux ���������.\n"
-#~ "�������� ������ �� ���� �������� ��� ���� �� ��������, �� �������� �� "
-#~ "���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root � ���������� ������������� ��� ����������� ����������, �� ����� � "
-#~ "���������\n"
-#~ "�� ������� ������������� �������. ������ �������� �������� ����������.\n"
-#~ "����������� �������� �� root ������� ���� �� ���� ������������� ������ �� "
-#~ "��������\n"
-#~ "�� ���������, ������� � � ������� ������� �������� ��� ���.\n"
-#~ "\n"
-#~ "\n"
-#~ "�������� ������ �� � ������� �� ������� ������� � �� � ����� ���-����� 8\n"
-#~ "�������. ������ �� ������ �� �� � ���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "�� ������� �������� ��������� ����� ��� ������, ������� ����: ������ �� "
-#~ "������\n"
-#~ "�� � ��������� ��� ����� ������."
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "���� ������ �� �������� ����� ������������ ����� �� ��������� ��.\n"
-#~ "\n"
-#~ "* ���������� ����������� �� ������� ����: ���� ����� ���� �� ������� "
-#~ "�������� �� ������� �� �����, �� � ���� �� ����������\n"
-#~ "  ������������: ����� ���������� ������� ����� �� ������� ������� ��, "
-#~ "���� �� ����������. ����������, �� ������ ���\n"
-#~ "  ������� ����� ������ �� ���������� � �������, ��, ��� ������ �� "
-#~ "��������� ���� ��������, �������� ���� ����� ���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "* �������� ���� �� ���������: ������ �� �������� ���� �� ��������� �� "
-#~ "���������\n"
-#~ "  ��. ����, �������� �� ��� ������������� �� ����� ����������. ������, "
-#~ "���\n"
-#~ "  �� ������ ����� �� ��������, �������� ���� �� ������������.\n"
-#~ "\n"
-#~ "\n"
-#~ "* ����� RAM, ��� � �����: �� ���������, ���� ���������� �����, �� �� "
-#~ "������ BIOS �� ����� �� RAM � ���������. ����\n"
-#~ "  �����������, GNU/Linux ���� �� �� ����� �� ������ �������� ����� �� "
-#~ "RAM. ��� � ����� ������, ��� ������ ��\n"
-#~ "  �������� ������ ���� �� RAM. ����, ���������� �� �� 2 ��� 4 MB ����� "
-#~ "���������� � ������������� RAM � ��������.\n"
-#~ "\n"
-#~ "\n"
-#~ "* ����������� ��������� �� ��������� ����������: ��� ������������ �� �� "
-#~ "��������� ����� ��������� ���������� (CD-ROM,\n"
-#~ "  �����, Zip � �.�.) ������� \"mount\" � \"umount\", �������� ���� "
-#~ "�����.\n"
-#~ "\n"
-#~ "\n"
-#~ "* ���������� �� \"/tmp\" ��� ���������: ��� ������ �� �� �������� ������ "
-#~ "������� � ���������� ����������� � \"/tmp\",\n"
-#~ "  ������ ��������� ��������� ��, �������� ���� �����.\n"
-#~ "\n"
-#~ "\n"
-#~ "* ��������� �� NumLock ��� ���������: ��� ������ �� �� ������� NumLock "
-#~ "��� ����������, �������� ���� �����. ����, ���������� ��\n"
-#~ "  �� ������ �� ��������� ���� ����� ��� ������� � �� ���� � �� �� ������ "
-#~ "��� X)."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "���� ������ �� �������� ��������� ���� ������ �������������� ��."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "���� ������ �� ���������� ������� ��. ����������� ������ � �������, �� "
-#~ "��\n"
-#~ "��������� ���� ����������� �� �����. ��� ��, ������ �� ������� \"������"
-#~ "\",\n"
-#~ "�� �� �������� ���� �������."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "���� ������ �� ���������� ������� ��. ����������� �������� � ���������, "
-#~ "��\n"
-#~ "�� ��������� ���� ����������� �� �����. ��� �� ��, ������� �� \"�����\", "
-#~ "��\n"
-#~ "�� �������� ���� �������.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ����������� �� Apple ������ � ����������� �����, �� ����� ���������� "
-#~ "��\n"
-#~ "���������� ������� �� ������������, �� ��������� 2-�� � 3-�� ����� ��\n"
-#~ "�������. ���� �� �� ���� ������ �� ������� �������������� �� ������� � "
-#~ "Linux\n"
-#~ "���������, � � X Windows GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ����� ADB �����, ����, �������� USB, ��� ���� Linux ������ �� �� "
-#~ "�������\n"
-#~ "�� �������� ������� ����� ������."
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "������ �� ���������� ������� URI �� ������ �� �������� � CUPS."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "���� ������ �� ��������� ��������� �� ����������.\n"
-#~ "\n"
-#~ "  * IP �����: ��� �� ������ ��� �� ��� ������� ����� �� ��������, "
-#~ "��������� �������� �� �������������.\n"
-#~ "    �� ������ �� ��������� IP �����, ��� �������� ������� \"����������� IP"
-#~ "\", ��-����.\n"
-#~ "\n"
-#~ "  * ������� �����: \"255.255.255.0\" ����������� � ����� �����. ��� �� "
-#~ "������ ��� �� ��� ������� ����� �� ��������, ��������� �������� �� "
-#~ "�������������.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * ����������� IP: ��� ������� �� �������� BOOTP ��� DHCP ��������, "
-#~ "�������� ���� �����. ��� � ��������, �� �� ��������\n"
-#~ "    �� �������� �� \"IP �����\". ��� �� ������ ��� �� ��� ������� ����� "
-#~ "������ �� ��������, ��������� �������� �� �������������."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "���� ������ �� ��������� ���� ��� ������ \"����������\" �������������\n"
-#~ "�������, ���� ���������������� �� \"����������������\" �������������\n"
-#~ "������ \"root\". ������ �� ��������� �� ���� ��� ������ �� �����, �����\n"
-#~ "����� ������ �� ������ ��������� ��. ���������� �� ����� ������ �� ���\n"
-#~ "������ ������������� (�������� �����, ��������� ��������� � �.�.)\n"
-#~ "� �� ������� ������ \"Home\" ����������, ������ �� ������� ����\n"
-#~ "���� �������������.\n"
-#~ "\n"
-#~ "\n"
-#~ "����� �������� ������ �� ���� ��. ���� � �� ��� ������������ ����������,\n"
-#~ "������������ �� ����������������� ������ �� ����������� �������� � "
-#~ "������.\n"
-#~ "\n"
-#~ "\n"
-#~ "������ �������� � �������������� �� ������ � ��������� �, ���� ��� �� ��\n"
-#~ "������, ����������� ����������������� ������."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "���� ������ �� �������� dialup �������. ��� �� ������\n"
-#~ "��� �� ��� ������� ����� �� ��������, ��������� ���������� ���� �� ���� "
-#~ "�����\n"
-#~ "�� �������� ���������� ��. ��� �� �������� ���������� �� DNS (name "
-#~ "server)\n"
-#~ "���, ���� ���������� �� ���� ����� �������� ���������� �� �� ����� ��\n"
-#~ "���������."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "���� ������ �� �������� ������� �� ��������. ��� �� ��� �������,\n"
-#~ "�������� ���������� ������ �� �������� �� �������� ���������� ��."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "���� ������ �� �������� ����� �� ����� ��. ��� �� ������\n"
-#~ "��� �� ��� ������� ����� �� ��������, ��������� �������� �� �������������."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "���� ������ �� �������� ����� �� ����� ��, ��� ������. ���\n"
-#~ "�� ������ ��� �� ��� ������� ����� �� ��������, �������� �� ������."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "���� ������ �� �������� ����� �� ����� ��, ��� �� ������. ��� ��\n"
-#~ "������ ��� �� ��� ������� ����� ������ �� ��������, � �������� "
-#~ "����������\n"
-#~ "������ �� �� �������� �� �������� ���������� ��."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "���� ������ �� ��������� ����� ������, ����� ������ ��\n"
-#~ "����������� ��� ��������.\n"
-#~ "\n"
-#~ "DrakX �� ������� ���� ����� ���������� ����� �� ������������� ��. ��� "
-#~ "������,\n"
-#~ "��� �� �� ���������� �� ����. ��� ������ �� ���������� ������� ����, �� "
-#~ "��������\n"
-#~ "������������ �� ������ ��������� �����, �� �� �������� ��-����������� "
-#~ "������.\n"
-#~ "� ������ �� ������� ������ �� ��������� ������� \"������������ ����� �� "
-#~ "������\";\n"
-#~ "� ���� ������, �� ������ �� �������� ������ �� 1000 ������ ..."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "\t* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "\t  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "\t  will then have a complete collection of software installed in order "
-#~ "to compile, debug and format source code,\n"
-#~ "\t  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "\t  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "���� ������ �� ���������� ���������������� �� �������� ��. ������������� "
-#~ "��:\n"
-#~ "\n"
-#~ "\t* ������� �������: ���� � �������� �����, ��� ������������� �� "
-#~ "���������� �������� �� ������ �� ��������� �������� �\n"
-#~ "\t  ����� ��� � ����.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* ����������: ��� ������������� �� ���������� �������� �� ������ �� "
-#~ "���������� �� ������, ���� � ����� �����.\n"
-#~ "\t  ������ �� ����� ���������� ����� ����� �� �������, �� �� �����������, "
-#~ "��������� ������ � ����������� ������� ���,\n"
-#~ "\t  ��� �� ��������� �������� ������.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* ������: ��� ������������� �� ���������� ���� ������ �� ������, ���� � "
-#~ "������� �����. ������� ������ ������\n"
-#~ "\t  (NFS ��� SMB), ������ �� ����� (Unix-��� ��� Microsoft Windows-���), "
-#~ "������ �� ����������� (NIS), ������ ��\n"
-#~ "\t  ����-����� � �.�.. ���� �����, �� ��������� ����������� ������� � �� "
-#~ "� ������� (KDE, GNOME, � �.�.)."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "���� ������ �� ���������� ���������������� �� �������� ��. ������������� "
-#~ "��:\n"
-#~ "\n"
-#~ "* ������� �������: ���� � �������� �����, ��� ������������� �� ���������� "
-#~ "�������� �� ������ �� ��������� �������� �\n"
-#~ "  ����� ��� � ����.\n"
-#~ "\n"
-#~ "\n"
-#~ "* ����������: ��� ������������� �� ���������� �������� �� ������ �� "
-#~ "���������� �� ������, ���� � ����� �����.\n"
-#~ "  ������ �� ����� ���������� ����� ����� �� �������, �� �� �����������, "
-#~ "��������� ������ � ����������� ������� ���,\n"
-#~ "  ��� �� ��������� �������� ������.\n"
-#~ "\n"
-#~ "\n"
-#~ "* ������: ��� ������������� �� ���������� ���� ������ �� ������, ���� � "
-#~ "������� �����. ������� ������ ������\n"
-#~ "  (NFS ��� SMB), ������ �� ����� (Unix-��� ��� Microsoft Windows-���), "
-#~ "������ �� ����������� (NIS), ������ ��\n"
-#~ "  ����-����� � �.�.. ���� �����, �� ��������� ����������� ������� � �� � "
-#~ "������� (KDE, GNOME, � �.�.)."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "���� ������ �� �������� ������� �� ������� ��-����."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "������ �� �������� ��������� �� ������� ��-����, �� �� �������� "
-#~ "������������.\n"
-#~ "\n"
-#~ "\n"
-#~ "������� \"������\", ��� ��� �������� � ��������� ��.\n"
-#~ "\n"
-#~ "\n"
-#~ "������� \"������\", ��� �� ��� �������� � ��������� ��. ������������ �� "
-#~ "�������� ��� ������� �� ����������\n"
-#~ "���������."
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "������ �� �������� ������� ���������� ���.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ��� �� �������: �� ������������, �������� spooler �������� \"lp\" "
-#~ "���� ��� �� �������. ���� �� ������ �� �����\n"
-#~ "������� ������� \"lp\".\n"
-#~ "     ��� ����� ���� ���� �������, ������ �� ���������� ������� ����� �� "
-#~ "����. ������ ������ �� �� �������� � pipe\n"
-#~ "     ������� (\"|\"). ���� ��, ��� ������������ ��-�������� ���, ������ "
-#~ "�� �� ������� �����, ����. \"My printer|lp\".\n"
-#~ "     ��������� �������� \"lp\" � �����(���) ��, �� �� ������ �� "
-#~ "������������.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Spool ����������: ���� � ������������, ������ �� ���������� �������� "
-#~ "�� �����. �������� ����������\n"
-#~ "      �� ������������, ����� ��� �� ������ ����� �� ����������\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ������ ��� �������: ��� ��������� �� � ��������� ������� ��� "
-#~ "��������� ��, �������� \"������� �������\".\n"
-#~ "     ��� ������ ������ �� ������� ������� �� �� ���������� Unix ������, "
-#~ "�������� \"��������� LPD �������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     ��� ������ ������ �� ������� ������� �� �� ���������� Microsoft "
-#~ "Windows ������ (��� �� Unix ������ �������� SMB\n"
-#~ "     ��������), �������� \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     ��� ������ ������ �� ������� ������� �� �� NetWare �����, �������� "
-#~ "\"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "��������� �� ���� �������. ����, �������� ����� �� ������������, �� "
-#~ "�����\n"
-#~ "� �������.\n"
-#~ "\n"
-#~ "\n"
-#~ "�� ����������, �������� �������� �� �������� �� ������ ��������� ����. "
-#~ "����\n"
-#~ "�� ������ \"/dev/lp0\" ��� GNU/Linux � \"LPT1\" ��� Microsoft Windows."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "��������� �� �� �� ����������.\n"
-#~ "\n"
-#~ "���� ���� ����������, ������ ���� Mandrake Linux ������� �� �� ������\n"
-#~ "�����������. ��� ������ �� ������� ����� ������������ ����������� "
-#~ "�������,\n"
-#~ "��������� �������������� ����������."
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "������ ����� ����� ��� �� ����� ��������"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "��������: � ���� ���� �� ���������, ROOT ��������� �� ��������� �� � "
-#~ "��������� !\n"
-#~ "��� ������ �� ��� root, ������ �� ������� ���� ���������� � ������ �� "
-#~ "���������� \"su\".\n"
-#~ "���� ����, �� ��������� �� ���������� �������� �� �� ���� �����, ����� �� "
-#~ "������.����� �����������."
-
-#~ msgid "cannot fork: "
-#~ msgstr "�� ���� �� �� ������: "
-
-#~ msgid "default"
-#~ msgstr "�� ������������"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "�� ��������� PPPOE"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "������������ �����-���������� aurora"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (�����)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (�����)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (����� �����)"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "not connected"
-#~ msgstr "�� �������"
-
-#~ msgid "received: "
-#~ msgstr "��������: "
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake � � ����� �� ``����� �����''.\n"
-#~ "�� ����� ������ rpmdrake, �� �� ������� ��������� �� �������"
-
-#~ msgid "sent: "
-#~ msgstr "���������: "
-
-#~ msgid "using module"
-#~ msgstr "���������� �� �����"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "���������� ���������� aurora"
-
-#~ msgid "yellow pages"
-#~ msgstr "����� ��������"
diff --git a/perl-install/share/po/bs.po b/perl-install/share/po/bs.po
deleted file mode 100644
index c406f3c6f..000000000
--- a/perl-install/share/po/bs.po
+++ /dev/null
@@ -1,12336 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# Vedran Ljubovic <vljubovic@smartnet.ba>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-02-28 20:49GMT\n"
-"Last-Translator: Vedran Ljubovic <vljubovic@smartnet.ba>\n"
-"Language-Team: Bosnian <prijevodi@lugbih.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfiguriši sve glave odvojeno"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Koristi Xinerama ekstenziju"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfiguriši samo karticu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Multi-head konfiguracija"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Vaš sistem podržava konfiguraciju više glava.\n"
-"Šta želite učiniti?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafička karta"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Izaberite grafičku kartu"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Izaberite X server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Izaberite X drajver"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X drajver"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Koju konfiguraciju XFree želite imati?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Vaša kartica može imati podršku za 3D hardversko ubrzanje ali samo sa\n"
-"XFree %s. Vašu karticu podržava XFree %s koji može imati bolju podršku za 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Vaša kartica može imati podršku za 3D hardversko ubrzanje sa XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s sa 3D hardverskim ubrzanjem"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Vaša kartica može imati podršku za 3D hardversko ubrzanje sa XFree %s,\n"
-"PAŽNJA OVO JE EKSPERIMENTALNA PODRŠKA I MOŽE ZALEDITI VAŠ RAČUNAR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s sa EKSPERIMENTALNIM 3D hardverskim ubrzanjem"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Vaša kartica može imati podršku za 3D hardversko ubrzanje sa XFree %s,\n"
-"PAŽNJA OVO JE EKSPERIMENTALNA PODRŠKA I MOŽE ZALEDITI VAŠ RAČUNAR.\n"
-"Vašu karticu podržava XFree %s koji može imati bolju podršku za 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation display driver)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfiguracija"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Izaberite veličinu memorije vaše grafičke karte"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Izaberite opcije za server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Izaberite monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva kritična parametra su brzina vertikalnog osvježenja, što je brzina\n"
-"kojom se cijeli ekran osvježava, i najvažnije brzina horizontalne\n"
-"sinhronizacije, što je brzina kojm se prikazuju skan-linije.\n"
-"\n"
-"VEOMA JE VAŽNO da ne navedete tip monitora čiji je sinhronizacioni\n"
-"raspon izvan mogućnosti vašeg monitora: time možete oštetiti monitor.\n"
-" Ako niste sigurni, izaberite najmanju opciju."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Brzina horizontalnog osvježavanja"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Brzina vertiaklnog osvježavanja"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor nije konfigurisan"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafička karta još uvijek nije konfigurisana"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Rezolucije još nisu odabrane"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Želite li testirati konfiguraciju?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Upozorenje: testiranje ove grafičke karte može zalediti računar"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Testiranje konfiguracije"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"probajte izmjeniti neke parametre"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Došlo je do greške"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Napuštam za %d sekundi"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Da li je ovo ispravna vrijednost?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Došlo je do greške, probajte izmjeniti neke parametre"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rezolucija"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Izaberite rezoluciju i dubinu boja"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafička karta: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Još"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspertni mod"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Prikaži sve"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rezolucije"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Raspored tastature: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tip miša: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Uređaj miša: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HorizSync: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafička karta: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikacija grafičke karte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafička memorija: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Dubina boja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolucija: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 drajver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Pripremam X-Window konfiguraciju"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Šta želite učiniti?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Izmjena Monitora"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Izmjena Grafičke kartice"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Izmjena Server opcija"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Izmjena Rezolucije"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Prikaži informacije"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Testiraj ponovo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Izlaz"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zadržati izmjene?\n"
-"Trenutna konfiguracija je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X u startanju"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mogu podesiti vaš računar da automatski pokrene X nakon boota.\n"
-"Želite li da se X pokrene kada bootate?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Molimo ponovo se prijavite na %s radi aktiviranja izmjena"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Molimo izvršite logout i zatim koristitite Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 boja (8 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 hiljada boja (15 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 hiljada boja (16 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliona boja (24 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde boja (32 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB ili više"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardna VGA, 640x480 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Kompatibilna, 1024x768 na 87 Hz sa preplitanjem (bez 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 na 87 Hz sa preplitanjem, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 na 60 Hz, 640x480 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 na 60 Hz, 800x600 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency koja može postići 1280x1024 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency koja može postići 1280x1024 na 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency koja može postići 1280x1024 na 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor koji može postići 1600x1200 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor koji može postići 1600x1200 na 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Prvi sektor boot particije"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor diska (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO instalacija"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Gdje želite smjestiti bootloader?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalacija"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO sa tekstualnim menijem"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO sa grafičkim menijem"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Bootanje iz DOS/Windowsa (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Glavne opcije bootloadera"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Bootloader koji ćete koristiti"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Bootloader instalacija"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Boot uređaj"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne radi na starim BIOSima)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompaktno"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompaktno"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video mod"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Čekanje prije bootanja default preslike"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Šifra"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Šifra (ponovo)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Ograniči opcije komandne linije"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ograniči"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Čisti /tmp prilikom svakog boota"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precizna veličina RAMa ako je potrebno (pronađeno %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Omogući više profila"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Navedite veličinu rama u MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcija ``Ograniči opcije komandne linije'' je beskorisna bez šifre"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Molimo pokušajte ponovo"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Šifre se ne poklapaju"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Init Poruka"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Otvori čekanje firmware-a"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Kernel Boot Timeout"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Omogući boot sa CDa?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Omogući boot sa OFa?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Default OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Navedene su razne stavke.\n"
-"Možete dodati nove ili promjeniti postojeće."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Gotovo"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Izmjeni"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Koju vrstu stavke želite dodati?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Ostali OSi (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Ostali OSi (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Ostali OSi (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Preslika"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Čitaj-piši"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nesigurno"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Labela"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Default"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-veličina"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Ukloni stavku"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Prazna labela nije dozvoljena"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Morate navesti image kernela"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Morate navesti root particiju"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ova labela je već u upotrebi"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Pronađeno %s %s interfejsa"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Imate li neki drugi?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Imate li ijedan %s interfejs?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Pogledaj hardware info"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaliram drajver za %s karticu %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koji %s drajver ću pokušati?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"U nekim slučajevima, %s drajver treba imati dodatne informacije za\n"
-"ispravan rad, iako on obično radi dobro i bez njih. Želite li navesti neke\n"
-"ekstra opcije za njega ili dozvoliti drajveru da ispita vaš računar za sve\n"
-"informacije koje mu trebaju? Povremeno, ispitivanje može zaglaviti računar,\n"
-"ali ne bi trebalo izazvati nikakvu štetu."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Ispitivanje"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Navedi opcije"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Sada možete navesti opcije za modul %s.\n"
-"Obratite pažnju da adrese trebate unositi sa prefiksom 0x kao npr. '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sada možete navesti opcije za modul %s. Opcije su u formatu ``ime=vrijednost "
-"ime2=vrijednost2 ...''.\n"
-"Na primjer, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opcije modula"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Učitavanje modula %s nije uspjelo.\n"
-"Želite li probati opet sa drugim parametrima?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "pristup X programima"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "pristup rpm alatima"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "dozvoli \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "pristup administrativnim datotekama"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(već dodan %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ova šifra je previše jednostavna"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Molimo navedite korisničko ime"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Korisničko ime smije sadržati samo mala slova, brojeve, `-' i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ovo korisničko ime je već dodano"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Dodaj korisnika"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Unesite korisnika\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Prihvati korisnika"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Pravo ime"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Korisničko ime"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mogu podesiti vaš računar da automatski prijavi jednog korisnika.\n"
-"Želite li koristiti ovu mogućnost?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Izaberite default korisnika:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Izaberite window manager koji će se pokretati:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Molimo izaberite jezik koji ćete koristiti."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Možete izabrati i druge jezike koji će biti dostupni nakon instalacije"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Svi"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Dozvoli svim korisnicima"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Ručno izaberi"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Bez dijeljenja"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paket %s treba biti instaliran. Da li ga želite instalirati?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Možete eksportovati koristeći NFS ili Sambu. Koji želite"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Nedostaje obavezan paket %s"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Odustani"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Pokreni userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Dijeljenje po-korisniku koristi grupu \"fileshare\". \n"
-"Možete dodavati korisnike u ovu grupu pomoću userdrake-a."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Dobrodošli u Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Loš"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Visok"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Viši"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoičan"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ovaj nivo treba koristiti pažljivo. On čini vaš sistem lakšim za upotrebu,\n"
-"ali vrlo osjetljivim: ne smije biti korišten za računar koji je spojen na\n"
-"druge ili na Internet. Nema pristupa šifrom."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Šifra je sada aktivirana, ali korištenje za mrežni računar još nije "
-"preporučeno."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ovo je standardna sigurnost koja je preporučena za računar koji će biti "
-"korišten za spajanje na Internet kao klijent."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Već postoje određena ograničenja, a više automatskih provjera se pokreće "
-"svaku noć."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Sa ovim sigurnosnim nivoom, postaje moguće koristiti ovaj sistem kao "
-"server.\n"
-"Sigurnost je sada dovoljno visoka za upotrebu sistema kao servera koji "
-"prima\n"
-"konekcije sa mnogo klijenata. Napomena: ako je vaš računar samo klijent na "
-"Internetu, možda je bolje da izaberete niži nivo."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Baziran na prethodnom nivou, ali sada je sistem potpuno zatvoren.\n"
-"Sigurnosne osobine na maksimumu."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Izaberite nivo sigurnosti"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Nivo sigurnosti"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Koristi libsafe za servere"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Biblioteka koja brani od napada \"buffer overflow\" i \"format string\"."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Dobro došli u %s izbornik operativnog sistema!\n"
-"\n"
-"Izaberite operativni sistem na listi gore ili\n"
-"sačekajte %d sekundi do default boota.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobro došli u GRUB izbornik operativnog sistema!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Koristite tipke %c i %c za izbor jedne od stavki."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite enter za bootanje izabranog OSa, 'e' za editovanje"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandi prije bootanja, ili 'c' za komandnu liniju."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Osvjetljene stavke će biti bootane automatski za %d sekundi."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nema dovoljno prostora u /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ne možete instalirati bootloader na %s particiju\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pomoć još nije implementirana.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguracija stila boota"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Datoteka"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>I"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Categorizing Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicionalni Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicionalni Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Pokreni Aurora-u prilikom boota"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub mod"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot mod"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Trenutno koristite %s kao boot manager.\n"
-"Kliknite na Konfiguriši kako bi se pokrenuo čarobnjak za podešavanje."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfiguriši"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistem mod"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Pokreni X-Window sistem na startu"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne, ne želim da se autologiram"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, želim da se autologiram sa ovim (korisnik, desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ne mogu otvoriti /etc/inittab za čitanje: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuta"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundi"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Ne mogu napraviti screenshot prije particioniranja"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Screenshotovi će biti dostupni nakon što instalirate u %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francuska"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Kostarika"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgija"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Češka"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Njemačka"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grčka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norveška"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Švedska"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Nizozemska"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italija"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austrija"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "SAD"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Molimo najprije napravite backup vaših podataka"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Pročitajte pažljivo!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ako planirate koristiti aboot, budite pažljivi i ostavite slobodnog prostora "
-"(2048 sektora je dovoljno)\n"
-"na početku diska"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Greška"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Čarobnjak"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Izaberi akciju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Imate jednu veliku FAT particiju\n"
-"(koju najvjerovatnije koristi MicroSoft Dos/Windows).\n"
-"Predlažem da najprije promjenite veličinu te particije\n"
-"(kliknite na nju, zatim na \"Promjeni veličinu\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Molimo kliknite na particiju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalji"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Prazno"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Ostalo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipovi file sistema:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Kreiraj"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tip"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Koristite ``%s'' umjesto toga"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Obriši"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Najprije koristite ``Demontiraj''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon promjene tipa particije %s, svi podaci na ovoj particiji će biti "
-"izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Izaberi particiju"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Izaberi drugu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Izlaz"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Prebaci u ekspertni mod"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Prebaci u normalni mod"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Poništi"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Svejedno nastavljate?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Izlaz bez spašavanja"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Izlazite bez pisanja tabele particija?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Želite li spasiti izmjene /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Auto alokacija"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Obriši sve"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informacije o hard disku"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Sve primarne particije su u upotrebi"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ne mogu dodati više particija"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Da biste imali još particija, molimo pobrišite jednu kako bi se mogla "
-"kreirati extended particija"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Snimi tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Vrati tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Spasi tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ponovo učitaj tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automatsko montiranje izmjenjivog medija"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Izaberite datoteku"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Backup tabela particija nema istu veličinu\n"
-"Ipak nastavljate?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Upozorenje"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ubacite disketu u jedinicu\n"
-"Svi podaci na toj disketi će biti izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Pokušavam da spasim tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detaljne informacije"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Tačka montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcije"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Promjeni veličinu"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Premještanje"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatiraj"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montiraj"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Dodaj na RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Dodaj na LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Demontiraj"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Ukloni sa RAIDa"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Ukloni sa LVMa"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modificiraj RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Koristi za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Napravi novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Početni sektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Veličina u MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tip datotečnog sistema: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Tačka montiranja: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preference: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Ukloniti loopback datoteku?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Izmjena tipa particije"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Koji datotečni sistem želite?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Prebacujem sa ext2 na ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Gdje želite montirati loopback datoteku %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gdje želite montirati uređaj %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne mogu izmjeniti tačku montiranja jer se ova particija koristi za "
-"loopback.\n"
-"Najprije uklonite loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Izračunavam granice FAT filesistema"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Mijenjam veličinu"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ovoj particiji ne možete mijenjati veličinu"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Svi podaci na toj particiji bi trebali biti backupovani"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon promjene veličine particije %s, svi podaci na njoj će biti izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Izaberite novu veličinu"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nova veličina u MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na koji disk je želite premjestiti?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na koji sektor je želite premjestiti?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Premještam"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Premještam particiju..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Izaberite postojeći RAID na koji ćete dodati"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novi"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Izaberite postojeći LVM na koji ćete dodati"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Naziv LVMa?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ova particija se ne može koristiti za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Naziv loopback datoteke: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Dajte naziv datoteke"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Datoteku već koristi drugi loopback, izaberite drugo ime"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Datoteka već postoji. Želite li je koristiti?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opcije montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Razni"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "uređaj"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivo"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "veličina chunka"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Budite oprezni: ova operacija je opasna"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Koju vrstu particioniranja?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Žalim, ali ipak neću prihvatiti kreiranje /boot particije ovdje (na cilindru "
-">1024).\n"
-"Ili ćete koristiti LILO i stvar neće raditi, ili nećete koristiti LILO pa "
-"vam ne treba ni /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Particija koju ste izabrali da dodate kao root (/) je fizički locirana "
-"iznad\n"
-"1024og cilindra hard diska, tako da nemate /boot particiju.\n"
-"Ako planirate koristiti LILO boot manager, pazite da dodate /boot particiju"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Izabrali ste softversku RAID particiju kao root (/).\n"
-"Nijedan bootloader nije u mogućnosti da rukuje sa ovim bez /boot particije.\n"
-"Pazite da dodate /boot particiju"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabela particija za uređaj %s će biti zapisana na disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Biće potrebno da rebootate prije nego što izmjene mogu stupiti na snagu"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon formatiranja particije %s, svi podaci na toj particiji će biti "
-"izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatiram"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiram loopback datoteku %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiram particiju %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Sakrij datoteke"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Prebaci datoteke na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Direktorij %s već sadrži neke podatke\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Premještam datoteke na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiram %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Uklanjam %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "particija %s je od sada poznata kao %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Uređaj: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS slovo uređaja: %s (pretpostavka)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tip: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ime: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Početak: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Veličina: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektora"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindar %d do %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatirana\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nije formatirana\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montirana\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback datoteka(e):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Particija koja se boota po defaultu\n"
-"    (za MS-DOS boot, ne za lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivo %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Veličina chunka %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Naziv loopback datoteke: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Postoji mogućnost da je ova\n"
-"particija Driver particija, vjerovatno\n"
-"biste je trebali ostaviti na miru.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ova posebna Bootstrap\n"
-"particija je za\n"
-"dvojni boot vašeg sistema.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Veličina: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tip tabele particija: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na busu %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcije: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Ključ za kodiranje datotečnog sistema"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Izaberite vaš ključ za kodiranje datotečnog sistema"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Ova šifra je previše jednostavna (mora biti duga najmanje %d karaktera)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Šifre se ne poklapaju"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Šifra"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Šifra (još jednom)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Promjeni tip"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Molimo kliknite na medij"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Traži servere"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatiranje %s nije uspjelo"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ne znam kako formatirati %s tipa %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montiranje particije %s u direktoriju %s nije uspjelo"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck nije uspio, izlazni kod %d ili signal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "greška u demontiranju %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednostavno"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "sa /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ne možete koristiti JFS za particije manje od 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ne možete koristiti ReiserFS za particije manje od 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Tačke montiranja moraju počinjati sa /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Već postoji particija sa tačkom montiranja %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ne možete koristiti LVM logički volumen za tačku montiranja %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ovaj direktorij treba ostati unutar korijenskog file sistema"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Potreban vam je pravi file sistem (ext2, reiserfs) za ovu tačku montiranja\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Ne možete koristiti kriptovani datotečni sistem za tačku montiranja %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nema dovoljno prostora za auto-alokaciju"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nemam šta da radim"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Greška u otvaranju %s za pisanje: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Došlo je do greške - nije pronađen nijedan ispravan uređaj na kojem se mogu "
-"kreirati novi file sistemi. Molimo provjerite vaš hardware i pronađite uzrok "
-"greške"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nemate nijednu particiju!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux instalacija se prostire na nekoliko CDova. DrakX zna da li "
-"je\n"
-"neki paket smješten na drugom CDu i on će izbaciti trenutni CD i zamoliti "
-"vas\n"
-"da ubacite neki drugi po potrebi."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\" Installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wishto connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Sada možete izabrati koje servise želite pokretati prilikom boota.\n"
-"\n"
-"Ovdje su predstavljeni svi servisi koji su dostupni u trenutnoj\n"
-"instalaciji. Pregledajte ih pažljivo i isključite sve one koji nisu "
-"potrebni\n"
-"prilikom boota.\n"
-"\n"
-"Kada izaberete servis dobićete kratki tekst koji objašnjava taj servis\n"
-"Ipak, ako niste sigurni da li je servis koristan ili ne, sigurnije je da ne\n"
-"mijenjate predloženi izbor.\n"
-"\n"
-"!! Budite vrlo pažljivi sa ovim korakom ako namjeravate koristiti vaš "
-"računar\n"
-"kao server: vjerovatno ne želite da pokrenete neke servise koji vam ne\n"
-"trebaju. Molimo vas da zapamtite da pojedini servisi mogu biti opasni\n"
-"ako su aktivni na serveru. Općenito, izaberite samo one servise koji vam\n"
-"stvarno trebaju. !!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working internet connection for this feature to function. It\n"
-"will actually install on your machine a time server that can be optionally\n"
-"used by other machines on your local network."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Na ovom mjestu trebate izabrati gdje želite instalirati Linux Mandrake\n"
-"operativni sistem na vašem hard disku. Ako je disk prazan ili ako postojeći\n"
-"operativni sistem koristi sav prostor na njemu, potrebno je da ga\n"
-"particionirate. U biti, particioniranje hard diska predstavlja logičko\n"
-"organiziranje kako bi se stvorio prostor za instaliranje vašeg novog\n"
-"Mandrake Linux sistema.\n"
-"\n"
-"Pošto su efekti particioniranja obično nepovratni, particioniranje može\n"
-"biti zastrašujuće i stresno ako ste neiskusan korisnik. Srećom, postoji\n"
-"čarobnjak koji pojednostavljuje taj proces. Prije započinjanja, molimo\n"
-"konsultirajte priručnik i nemojte žuriti.\n"
-"\n"
-"Ako instalirate koristeći Ekspertni mod, ući ćete u DiskDrake, Mandrake\n"
-"Linux alat za particioniranje, koji vam omogućava da fino podesite vaše\n"
-"particije. Pogledajte priručnik, poglavlje o DiskDrake-u. Na instalacionom\n"
-"sučelju možete koristiti čarobnjake kao što je opisano tamo, klikajući na\n"
-"dugme Čarobnjak.\n"
-"\n"
-"Ako su particije već definirane (tokom neke ranije instalacije ili pomoću\n"
-"nekog drugog alata za particioniranje), sve što trebate jeste da ih "
-"izaberete\n"
-"za instalaciju vašeg Linux sistema.\n"
-"\n"
-"Ako particije nisu već definirane, trebate ih kreirati koristeći čarobnjak.\n"
-"Ovisno o konfiguraciji vašeg hard diska, može biti dostupno nekoliko\n"
-"mogućnosti:\n"
-"\n"
-" * Koristi slobodan prostor: jednostavno vodi na automatsko particioniranje\n"
-"vašeg praznog diska (diskova). Neće biti postavljana nikakva daljnja "
-"pitanja.\n"
-"\n"
-" * Koristi postojeću particiju: čarobnjak je detektovao jednu ili više "
-"postojećih\n"
-"Linux particija na vašem hard disku. Ako ih želite zadržati, izaberite ovu\n"
-"opciju.\n"
-"\n"
-" * Koristi slobodan prostor na Windows particiji: ako je na vašem hard\n"
-"disku instaliran Microsoft Windows koji je zauzeo sav slobodan prostor,\n"
-"moraćete napraviti nešto slobodnog prostora za Linux. To možete učiniti\n"
-"brišući vašu Microsoft Windows particiju zajedno sa podacima (vidi opcije\n"
-"\"Pobriši čitav disk\" ili \"Ekspertni mod\") ili možete promjeniti veličinu "
-"vaše\n"
-"Microsoft Windows particije. Promjena veličine se može izvršiti bez gubitka\n"
-"podataka. Ova mogućnost je preporučena ako namjeravate koristiti i Linux\n"
-"Mandrake i Microsoft Windows na istom računaru.\n"
-"\n"
-"    Prije izbora ove opcije, molimo da imate na umu da će veličina vaše\n"
-"Microsoft Windows particije biti manja nego trenutno. To znači da će "
-"Microsoft\n"
-"Windows prijavljivati da imate manje prostora za smještaj podataka ili "
-"instaliranje\n"
-"novog softwarea.\n"
-"\n"
-" * Pobriši čitav disk: ako želite da obrišete sve podatke i sve particije\n"
-"koje su prisutne na vašem hard disku i umjesto njih postavite vaš novi "
-"Linux\n"
-"Mandrake sistem, možete izabrati ovu opciju. Budite oprezni sa ovom\n"
-"mogućnošću, jer nećete moći poništiti vaš izbor nakon potvrde.\n"
-"\n"
-"   !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti "
-"izgubljeni. !!\n"
-"\n"
-" * Ukloni Windows: ovo će jednostavno pobrisati sve na disku i početi od\n"
-"početka, particionirajući ga. Svi podatci na vašem disku će biti "
-"izgubljeni.\n"
-"\n"
-"   !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti "
-"izgubljeni. !!\n"
-"\n"
-" * Ekspertni mod: ako želite da ručno particionirate vaš hard disk, "
-"izaberite ovu\n"
-"opciju. Budite oprezni - to je moćan, ali i opasan izbor. Vrlo lako možete\n"
-"izgubiti sve vaše podatke. Zato nemojte birati ovu opciju sem ako ste "
-"sigurni\n"
-"šta radite."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Sve particije koje su upravo definisane moraju biti formatirane kako bi se\n"
-"mogle koristiti (formatiranje znači kreiranje datotečnog sistema). \n"
-"\n"
-"U ovom trenutku možda ćete poželjeti da reformatirate neke već postojeće\n"
-"particije kako biste pobrisali podatke koje sadrže. Ako želite to učiniti, "
-"molim\n"
-"takođe izaberite te particije koje želite da formatirate.\n"
-"\n"
-"Molim obratite pažnju da nije neophodno formatirati sve postojeće "
-"particije.\n"
-"Morate reformatirati particije koje sadrže operativni sistem (kao što su\n"
-"\"/\", \"/usr\" ili \"var\") ali ne morate reformatirati particije koje "
-"sadrže\n"
-"podatke koje želite zadržati (tipično /home).\n"
-"\n"
-"Molimo da pažljivo izaberete particije. Nakon formatiranja, svi podaci na\n"
-"odabranim particijama će biti pobrisani i nećete biti u mogućnosti da ih\n"
-"povratite.\n"
-"\n"
-"Kliknite na OK kada budete spremni za formatiranje particija.\n"
-"\n"
-"Kliknite na Odustani ako želite da izaberete druge particije za instalaciju\n"
-"vašeg novog Linux-Mandrake operativnog sistema.\n"
-"\n"
-"Kliknite na Napredno da izaberete particije koje želite provjeriti radi\n"
-"loših blokova."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Vaš novi Linux-Mandrake operativni sistem se trenutno intalira. Ovisno o\n"
-"broju paketa koje želite instalirati i brzini vašeg računara, ova operacija\n"
-"bi mogla trajati nekoliko minuta ali i značajno duže.\n"
-"\n"
-"Molim da imate strpljenja."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bug-fixes may\n"
-"have been fixed, and security issues solved. To allow you to benefit from\n"
-"this updates you are now proposed to download them from the internet.\n"
-"Choose \"Yes\" if you have a working internet connection, or \"No\" if you\n"
-"prefer to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearer to you. Then a packages selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package or \"Cancel\" to abort."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Prije nego što nastavimo, trebate pažljivo pročitati uvjete licence. Ona\n"
-"pokriva cijelu Mandrake Linux distribuciju, pa ako se ne slažete sa svim\n"
-"uvjetima u njoj, kliknite na dugme Odbij, što će automatski završiti "
-"instalaciju.\n"
-"Da biste nastavili sa instalacijom, kliknite na dugme Prihvati."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step.\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk.\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and load your "
-"initial\n"
-"partitions table.\n"
-"\n"
-"    * \"removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(Type, options, format) and gives more information.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the chapter ext2fs from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want to resize in order to install your\n"
-"new Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-"Molimo da imate strpljenja. Ova operacija može potrajati nekoliko minuta."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX sada mora znati da li želite obaviti podrazumjevanu instalaciju\n"
-"(\"Preporučeno\") ili želite da imate veću kontrolu (\"Ekspert\"). Takođe\n"
-"imate izbor između instalacije novog ili unaprijeđenja postojećeg\n"
-"Mandrake Linux sistema. \n"
-"\n"
-" * \"Instaliraj\" Potpuno briše raniji sistem. U stvari, ovisno o tome\n"
-"šta trenutno sadrži vaš računar, možda ćete moći zadržati neke stare\n"
-"particije (Linux i druge) bez ikakvih izmjena.\n"
-"\n"
-" * \"Unaprijedi\" Ova klasa instalacije vam omogućuje da jednostavno\n"
-"unaprijedite pakete trenutno instalirane na vašem Mandrake Linux sistemu.\n"
-"Ona zadržava trenutne particije vaših hard diskova kao i postavke "
-"korisnika.\n"
-"Svi drugi koraci instalacije ostaju dostupni kao i u običnoj instalaciji.\n"
-"\n"
-" * \"Unaprijedi samo pakete\" Ova potpuno nova klasa vam omogućuje da\n"
-"unaprijedite postojeći Mandrake Linux sistem pri čemu ćete sačuvati svu\n"
-"sistemsku konfiguraciju bez izmjena. Dodavanje novih paketa trenutnoj\n"
-"instalaciji je također moguće.\n"
-"\n"
-"Unaprijeđenja bi trebala raditi fino za Mandrake Linux sisteme počevši\n"
-"od verzije \"8.1\".\n"
-"\n"
-"Ovisno o vašem poznavnaju GNU/Linuxa, molim izaberite jedan od sljedećih\n"
-"načina za instalaciju ili update vašeg Mandrake Linux operativnog sistema:\n"
-"\n"
-" * Preporučeno: ako nikada niste instalirali GNU/Linux operativni sistem,\n"
-"izaberite ovo. Instalacija će biti veoma jednostavna i biće vam postavljeno\n"
-"svega par pitanja.\n"
-"\n"
-" * Ekspert: ako imate dobro znanje GNU/Linuxa, možete odabrati ovu klasu\n"
-"instalacije. Ekspertna instalacija vam omogućuje da obavite visoko "
-"prilagođenu\n"
-"instalaciju. Odgovor na neka pitanja može biti vrlo težak ako nemate dobro\n"
-"poznavanje GNU/Linuxa, zato nemojte birati ovo sem ako znate šta radite."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"[Return] to \"Cancel\" and choose again."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Molimo izaberite ispravan port. Na primjer, \"COM1\" port pod MS\n"
-"Windowsom se zove \"ttyS0\" pod GNU/Linuxom."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if onlynfor "
-"one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO and grub are boot loaders for GNU/Linux. This stage, normally, is\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general boot-loader parameters, you are\n"
-"presented the list of boot options that will be available at boot time.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Select an entry and click \"Modify\" to modify or remove\n"
-"it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Morate navesti gdje želite smjestiti informacije koje su potrebne za\n"
-"bootanje GNU/Linuxa.\n"
-"\n"
-"Izaberite \"Prvi sektor na disku (MBR)\" sem ako znate tačno šta radite."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control "
-"Centernand clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX sada pronalazi sve IDE uređaje prisutne na vašem računaru. Također\n"
-"će pretražiti sistem za jednu ili više PCI SCSI kartica. Ako SCSI kartica "
-"bude\n"
-"pronađena, DrakX će automatski instalirati odgovarajući drajver.\n"
-"\n"
-"Budući da pronalaženje hardware-a ponekad ne uspjeva pronaći neki dio\n"
-"hardware-a, DrakX će pitati za potvrdu da li imate SCSI karticu ili ne.\n"
-"Kliknite Da ako znate da postoji SCSI kartica instalirana na vašem "
-"računaru.\n"
-"Biće vam predstavljena lista SCSI kartica koje možete izabrati. Kliknite Ne\n"
-"ako nemate nikakav SCSI hardware. Ako niste sigurni, možete pregledati "
-"listu\n"
-"hardware u vašem računaru tako što ćete izabrati \"Vidi hardware info\" i "
-"kliknuti\n"
-"na OK. Pretražite listu hardware-a i zatim kliknite na dugme OK kako bi se\n"
-"vratili na pitanje o SCSI-ju.\n"
-"\n"
-"Ako morate ručno odabrati adapter, DrakX će vas pitati da li želite navesti\n"
-"neke opcije za njega. Trebate dopustiti DrakXu da ispita hardware za\n"
-"neke opcije specifične za tu karticu. Ovo obično radi dobro.\n"
-"\n"
-"Ako DrakX ne može ispitati opcije koje trebaju biti proslijeđene, moraćete\n"
-"ručno navesti opcije za drajver. Molimo pogledajte Priručnik za korištenje\n"
-"/User Guide/ (poglavlje 3, sekcija \"Prikupljanje informacija o vašem "
-"hardveru\")\n"
-"za napomene o pribavljanju ovih informacija iz hardverske dokumentacije,\n"
-"sa web stranice proizvođača (ako imate internet pristup) ili iz Microsoft\n"
-"Windowsa (ako ga imate na vašem sistemu)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Izaberite hard disk koji želite obrisati kako biste instalirali vašu novu "
-"Mandrake\n"
-"Linux particiju. Budite pažljivi, svi podaci koji se nalaze na njemu će "
-"biti\n"
-"izgubljeni i neće se moći vratiti!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Morate također formatirati i %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Izabrali ste sljedeći server (servere): %s\n"
-"\n"
-"\n"
-"Ovi serveri su aktivirani automatski. Oni nemaju nikakvih poznatih "
-"sigurnosnih\n"
-"problema, ali možda će biti pronađeni neki novi. U tom slučaju, morate ih\n"
-"unaprijediti što prije bude moguće.\n"
-"\n"
-"\n"
-"Da li zaista želite instalirati ove servere?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Ne mogu koristiti broadcast bez NIS domene"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ubacite FAT formatiranu disketu u jedinicu %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ova disketa nije FAT (DOS/Windows) formatirana"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Da koristite ovaj izbor spašenih paketa, bootajte instalaciju sa ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Greška u čitanju datoteke %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Neki dio hardware-a na vašem računaru zahtjeva ``posjedovane'' drajvere za "
-"rad.\n"
-"Možete naći više podataka o njima na: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Morate imati root particiju.\n"
-"Za ovo, kreirajte particiju (ili kliknite na neku od postojećih).\n"
-"Zatim izaberite ``Tačka montiranja'' i postavite ga na `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Morate imati swap particiju"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nemate nijednu swap particiju\n"
-"\n"
-"Svejedno nastavi?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Morate imati FAT particiju montiranu na /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Koristi slobodan prostor"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Koristi postojeću particiju"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nema nijedne postojeće particije za upotrebu"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Koristi Windows particiju za loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Koju particiju želite koristiti za Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Izaberite veličine"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Veličina root particije u MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Veličina swap particije u MB:"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Koristi slobodan prostor na Windows particiji"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kojoj particiji želite promjeniti veličinu?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Izračunavam granice Windows datotečnog sistema"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT resizer ne može izmjeniti vašu particiju, \n"
-"došlo je do sljedeće greške: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Vaša Windows particija je previše fragmentirana, molimo prvo pokrenite "
-"``defrag'' "
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"UPOZORENJE!\n"
-"\n"
-"DrakX će sada promjeniti veličinu vaše Windows particije. Budite pažljivi, "
-"ova\n"
-"operacija je opasna. Ako to već niste uradili, najprije napustite "
-"instalaciju,\n"
-"pokrenite scandisk pod Windowsom (opcionalno pokrenite defrag), zatim\n"
-"ponovo pokrenite instalaciju. Također biste trebali spasiti sve podatke.\n"
-"Kada ste sigurni, kliknite na Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Koju veličinu želite da sačuvate za windows na"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "particiji %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT promjena veličine nije uspjela: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ne postoji nijedna FAT particija za promjenu veličine ili upotrebu za "
-"loopback (ili nije ostalo dovoljno prostora)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Pobriši čitav disk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Ukloni Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Imate više od jednog hard diska, na koji želite instalirati linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"SVE postojeće particije i podaci na njima će biti izgubljeni na disku %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Ručno particioniranje diska"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Koristi fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sada možete particionirati %s.\n"
-"Kada završite, ne zaboravite spasiti sa `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemate dovoljno slobodnog prostora na vašoj Windows particiji"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ne mogu naći dovoljno prostora za instalaciju"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Particioni čarobnjak je našao sljedeća rješenja:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Particioniranje nije uspjelo: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Pokrećem mrežu"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Zaustavljam mrežu"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Došlo je do greške, ali ne znam kako da je riješim fino.\n"
-"Nastavite na vlastiti rizik."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dvostruka tačka montiranja %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Neki bitni paketi nisu ispravno instalirani.\n"
-"Ili je neispravan vaš cdrom uređaj ili vaš cdrom medij.\n"
-"Provjerite cdrom na instaliranom računaru koristeći \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Dobro došli u %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nema pogodne disketne jedinice"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Prelazim na korak `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Vaš sistem ima nizak nivo resursa. Možda imate neki problem sa instalacijom\n"
-"Mandrake Linuxa. Ako se ovo desi, možete pokušati tekstualnu instalaciju. Za "
-"ovo,\n"
-"pritisnite `F1' prilikom bootanja na CDROMu, zatim unesite `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Klasa instalacije"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Molimo izaberite jednu od sljedećih klasa instalacije:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ukupna veličina grupa koje ste izabrali je otprilike %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ako želite da instalirate manje od ove veličine,\n"
-"izaberite procenat paketa koje želite instalirati.\n"
-"\n"
-"Nizak procenat će instalirati samo one najbitnije pakete;\n"
-"procenat 100%% će instalirati sve izabrane pakete."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Na disku imate mjesta samo za %d%% ovih paketa.\n"
-"\n"
-"Ako želite da instalirate manje od ovoga,\n"
-"izaberite procenat paketa koje želite da instalirate.\n"
-"Nizak procenat će instalirati samo one najbitnije pakete;\n"
-"procenat %d%% će instalirati najveći mogući broj paketa."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-"Na idućem koraku ćete biti u mogućnosti da ih izaberete nešto preciznije."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procenat paketa za instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Izbor grupe paketa"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Izbor pojedinačnih paketa"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukupna veličina: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Neispravan paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ime: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verzija: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Veličina: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Značaj: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Ne možete izabrati ovaj paket jer nema dovoljno prostora za njega"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Sljedeći paketi će biti instalirani"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Sljedeći paketi će biti uklonjeni"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Ne možete izabrati/isključiti ovaj paket"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ovo je obavezan paket, ne može biti isključen"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ne možete isključiti ovaj paket. On je već instaliran"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ovaj paket mora biti unaprijeđen\n"
-"Jeste li sigurni da ga želite isključiti?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ne možete isključiti ovaj paket. On mora biti unaprijeđen"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Automatski prikaži izabrane pakete"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalacija"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Učitaj/Spasi na disketu"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Osvježavam izbor paketa"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimalna instalacija"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Izaberite pakete koje želite instalirati"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instaliram"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Procjenjujem"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Preostalo vremena "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Molimo sačekajte, pripremam instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paketa"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaliram paket %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Prihvati"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Odbij"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Promjenite vaš CD-ROM!\n"
-"\n"
-"Molimo ubacite CD označen sa \"%s\" u vaš CD-ROM uređaj i pritisnite Ok kad "
-"ste spremni.\n"
-"Ako ga nemate, pritisnite Odustani da biste izbjegli instaliranje sa ovog CD-"
-"ROMa."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Svejedno nastavi?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Došlo je do greške pri naručivanju paketa:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Došlo je do greške kod instaliranja paketa:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Došlo je do greške"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Da li zaista želite napustiti instalaciju?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licencni ugovor"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatura"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Molimo izaberite izgled vaše tastature."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Ovdje je puna lista svih dostupnih tastatura"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Koju klasu instalacije želite?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instaliraj/Unaprijedi"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Da li je ovo instalacija ili update?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Preporučeno"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Unaprijedi"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Unaprijedi samo pakete"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Molimo izaberite vrstu vašeg miša."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port miša"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Molimo izaberite na kojem serijskom portu je spojen vaš miš."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulacija tipki"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulacija 2 dugmeta"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulacija 3 dugmeta"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Podešavam PCMCIA kartice..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Podešavam IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nema dostupnih particija"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Pretražujem particije da nađem tačke montiranja"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Izaberite tačke montiranja"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ne mogu pročitati vašu tabelu particija, previše je oštećena za mene :(\n"
-"Mogu pokušati da pobrišem loše particije (SVI PODACI će biti izgubljeni!).\n"
-"Drugo rješenje je da onemogućim DrakX da mijenja tabelu particija.\n"
-"(greška je %s)\n"
-"\n"
-"Slažete li se sa gubitkom svih particija?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake nije uspio ispravno pročitati tabelu particija.\n"
-"Nastavljate na vlastiti rizik!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nema dovoljno slobodnog prostora za 1 MB bootstrap! Instalacija će "
-"nastaviti, ali da biste bootali vaš sistem, morate kreirati bootstrap "
-"particiju u DiskDrake-u"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Nije pronađena nijedna root particija radi unaprjeđivanja"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Root particija"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Šta je root particija (/) vašeg sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Moraćete rebootati da bi izmjene tabele particija stupile na snagu"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Izaberite particije koje želite formatirati"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Provjeri loše blokove?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatiram particije"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreiram i formatiram datoteku %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Nemam dovoljno swap prostora da dovršim instalaciju, molimo dodajte još"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Tražim dostupne pakete"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Pronalazim pakete za unaprjeđenje"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Vaš sistem nema dovoljno preostalog prostora za instalaciju ili unaprjeđenje "
-"(%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Potpuna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimalna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Preporučena (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Molimo izaberite učitaj ili spasi izbor paketa na disketu.\n"
-"Format je isti kao i diskete koje generiše auto_install"
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Vrati sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Vraćam sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Izbor paketa"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Ubacite disketu koja sadrži izbor paketa"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Spasi na disketu"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Izabrana veličina je veća od slobodnog prostora"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Vrsta instalacije"
-
-#: ../../install_steps_interactive.pm_.c:672
-#, fuzzy
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Niste izabrali nijednu grupu paketa\n"
-"Molimo izaberite minimalnu instalaciju koju želite"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Sa X-om"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Sa osnovnom dokumentacijom (preporučeno)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Stvarno minimalna instalacija (posebno bez urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ako imate sve CDe na listi, kliknite na Ok.\n"
-"Ako nemate nijedan od ovih CDova, kliknite na Odustani.\n"
-"Ako nedostaju samo neki CDovi, isključite ih, zatim kliknite na Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM pod oznakom \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Pripremam instalaciju"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaliram paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Post-instalacijsko podešavanje"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Molimo ubacite boot disketu koja je upotrebljena u jedinicu %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Molimo ubacite disketu Update Modula u jedinicu %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Sada imate mogućnost da dobavite sa interneta unaprijeđene pakete koji\n"
-"su izašli nakon što je distribucija objavljena.\n"
-"\n"
-"Dobićete sigurnosne ispravke ili ispravke bugova, ali prethodno je potrebno\n"
-"da podesite Internet konekciju.\n"
-"\n"
-"Da li želite instalirati unaprjeđenja ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Kontaktiram Mandrake Linux web stranicu da bih saznao listu dostupnih mirrora"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izaberite mirror sa kojeg će biti dobavljeni paketi"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kontaktiram mirror da bih saznao listu dostupnih paketa"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Koja je vaša vremenska zona?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardverski sat podešen na GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatska sinhronizacija vremena (koristeći NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Udaljeni CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nema štampača"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Imate li ISA zvučnu karticu?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Pokrenite \"sndconfig\" poslije instalacije kako biste podesili vašu zvučnu "
-"karticu"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nije otkrivena zvučna kartica. Probajte \"harddrake\" poslije instalacije"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Ukratko"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Miš"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Vremenska zona"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Štampač"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN kartica"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Zvučna kartica"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV kartica"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokalne datoteke"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Podesite root šifru"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez šifre"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Ova šifra je previše jednostavna (mora biti duga najmanje %d karaktera)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentikacija"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Autentikacijski LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Autentifikacija NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS domen"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Prva disketna jedinica"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Druga disketna jedinica"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Preskoči"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, fuzzy, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(PAŽNJA! Vi koristite XFS za vašu root particiju,\n"
-"pravljenje boot diskete na 1.44 Mb disketi vjerovatno neće\n"
-"raditi, pošto XFS traži veoma velik drajver)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Žao mi je, nema dostupne disketne jedinice"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Izaberite disketnu jedinicu koju želite koristiti da napravite boot disketu"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ubacite disketu u %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Pravim boot disketu"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Pripremam bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Izgleda da imate OldWorld ili Unknown računar,\n"
-" yaboot bootloader neće raditi kod vas.\n"
-"Instalacija će se nastaviti, ali ćete\n"
-" morati koristiti BootX za bootanje vašeg računara"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Da li želite koristiti aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Greška u instaliranju aboota, \n"
-"da li da pokušam nasilnu instalaciju čak i ako to uništi prvu particiju?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instaliram bootloadera"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalacija bootloadera nije uspjela. Došlo je do sljedeće greške:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Možda ćete trebati promjeniti vaš Open Firmware boot uređaj\n"
-" da biste aktivirali bootloader.  Ako ne vidite upit bootloadera\n"
-" prilikom bootanja, držite Command-Option-O-F prilikom boota\n"
-" i unesite:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Zatim kucajte: shut-down\n"
-"Prilikom idućeg boota biste trebali vidjeti upit bootloadera."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ubacite praznu disketu u jedinicu %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Pravim auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Neki koraci nisu dovršeni.\n"
-"\n"
-"Da li zaista želite izaći sada?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Čestitamo, instalacija je završena.\n"
-"Uklonite boot medij i pritisnite return za reboot.\n"
-"\n"
-"\n"
-"Za informacije o ispravkama koje su dostupne za ovu verziju Mandrake "
-"Linuxa,\n"
-"pogledajte Errata koja je dostupna na:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informacije o podešavanju vašeg sistema su dostupne u poglavlju\n"
-"\"nakon instalacije\" vašeg Zvaničnog Mandrake Linux priručnika za upotrebu."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Napravi auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Ova auto instalacija može biti potpuno automatizovana ako želite,\n"
-"u kojem slučaju će preuzeti hard disk!!\n"
-"(ovo je namjenjeno za instaliranje na drugi računar).\n"
-"\n"
-"Možda ćete željeti radije ponoviti instalaciju.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizovano"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ponovi"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Spasi izbor paketa"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux instalacija %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> između elemenata  | <Space> vrši izbor | <F12> idući ekran "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu nedostaje"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "nedostaje consolehelper"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Izaberi datoteku"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Napredno"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Osnovno"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Molimo sačekajte"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Proširi stablo"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Smanji stablo"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Prekidač između ravnog i grupnog sortiranja"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Pogrešan izbor, pokušajte ponovo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Vaš izbor? (podrazumjevano %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Stavke koje morate popuniti:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Vaš izbor? (0/1, podrazumjevano %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Dugme '%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Da li želite kliknuti na ovo dugme?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Vaš izbor? (podrazumjevano '%s' %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Postoji mnogo stvari od kojih možete izabrati (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Molimo unesite prvi broj od deset koji želite izmjeniti,\n"
-"ili samo pritisnite Enter za nastavak.\n"
-"Vaš izbor?"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Primjetite, label je promjenjena:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Ponovo pošalji"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Češka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Njemačka"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Španska"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finska"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francuska"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norveška"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Poljska"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruska"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Švedska"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK tastatura"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US tastatura"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanska"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenska (stara)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenska (pisaća mašina)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenska (fonetska)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbejdžanska (latinica)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgijska"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bugarska (fonetska)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bugarska (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilska (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bjeloruska"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Švicarska (Njemački izgled)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Švicarska (Francuski izgled)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Češka (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Njemačka (bez mrtvih tipki)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danska"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norveška)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Švedska)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonska"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijska (\"Ruski\" izgled)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijska (\"Latinični\" izgled)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grčka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Mađarska"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Hrvatska"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraelska"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Izraelska (Fonetska)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranska"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandska"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italijanska"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japanska 106 tipki"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korejanska tastatura"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latino-Američka"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvanska AZERTY (stara)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanska AYERTY (nova)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanska \"red brojeva\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanska \"fonetska\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvijska"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonska"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandska"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Poljska (qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Poljska (qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugalska"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadska (Kvebek)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumunska (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumunska (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruska (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovenačka"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovačka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovačka (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Srpska (ćirilica)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamilska"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tajlandska tastatura"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tadžička tastatura"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turska (tradicionalni \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turska (moderni \"Q\" model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrajinska"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US tastatura (međunarodna)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnamska \"red brojeva\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavenska (latinično)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Desna Alt tipka"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Obje Shift tipke istovremeno"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Control i Shift tipka istovremeno"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock tipka"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl i Alt tipke istovremeno"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt i Shift tipke istovremeno"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "\"Meni\" tipka"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Lijeva \"Windows\" tipka"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Desna \"Windows\" tipka"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kružno montiranje %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Najprije ukloni logičke volumene\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA podrška za 2.2 kernele više ne postoji. Molim koristite 2.4 kernel."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Opšti PS2 Miš sa kotačem"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 dugme"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Opšti miš sa 2 dugmeta"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Opšti"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Kotač"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serijski"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Opšti miš sa 3 dugmeta"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serijski, stari C7 tip)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 dugmeta"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 dugmeta"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "nijedan"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Bez miša"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Molimo testirajte miš"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Da biste aktivirali miša,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "POMJERITE VAŠ KOTAČ!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Kraj"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Sljedeći ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Prethodni"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Spoji se na Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Najčešći način za konekciju sa adsl-om je pppoe.\n"
-"Neke konekcije koriste pptp, a vrlo rijetke koriste dhcp.\n"
-"Ako ne znate, izaberite 'koristi pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "koristi dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "koristi pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "koristi pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Koji dhcp klijent želite koristiti?\n"
-"Podrazumjevani je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nije pronađen ethernet mrežni adapter na vašem sistemu.\n"
-"Ne mogu podesiti ovu vrstu konekcije."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Izaberite mrežni interface"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Molimo izaberite koji mrežni adapter želite koristiti za spajanje na Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nije pronađena mrežna kartica"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Podešavam mrežu"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Molimo unesite naziv vašeg računara ako ga znate.\n"
-"Neki DHCP serveri traže hostname kako bi radili.\n"
-"Naziv vašeg računara bi trebao biti puno-kvalifikovani naziv,\n"
-"kao što je ``mojcomp.mojlab.mojafirma.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Host name"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Čarobnjak za podešavanje mreže"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Vanjski ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interna ISDN kartica"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Koje je vrste vaša ISDN konekcija?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Koju ISDN konfiguraciju želite?\n"
-"\n"
-"* Stara konfiguracija koristi isdn4net. On sadrži moćne alate,\n"
-"  ali ga je teško podesiti i nije standardiziran.\n"
-"\n"
-"* Novu konfiguraciju je lakše razumjeti, standardnija je,\n"
-"  ali ima manje alata.\n"
-"\n"
-"Preporučujemo light konfiguraciju.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nova konfiguracija (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracija (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Podešavanje ISDNa"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Izaberite vašeg providera.\n"
-" Ako nije na listi, izaberite Nije na listi"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Evropski protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Evropski protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol za ostatak svijeta"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol za ostatak svijeta \n"
-" bez D-kanala (iznajmljene linije)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Koji protokol želite koristiti?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Koju vrstu kartice imate?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ne znam"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ako imate ISA karticu, vrijednosti na idućem ekranu bi trebale biti "
-"ispravne.\n"
-"\n"
-"Ako imate PCMCIA karticu, moraćete znati IRQ i IO vaše kartice.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Prekid"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Nastavak"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Koja je vaša ISDN kartica ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Otkrio sam neku ISDN PCI karticu, ali ne znam tip. Molimo izaberite neku PCI "
-"karticu na idućem ekranu."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nije pronađena nijedna ISDN PCI kartica. Molimo izaberite jednu na idućem "
-"ekranu."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Molimo izaberite na koji serijski port je nakačen vaš modem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opcije dialupa"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Naziv konekcije"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Broj telefona"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skripta"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Ime domena"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Prvi DNS server (opcionalno)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Drugi DNS server (opcionalno)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Možete se diskonektovati ili prekonfigurisati vašu konekciju."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Možete prekonfigurisati vašu konekciju."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Trenutno ste spojeni na Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Možete se spojiti na Internet ili prekonfigurisati vašu konekciju."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Trenutno niste konektovani na Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Konektuj me"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Prekini konekciju"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Podesi konekciju"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internet konekcija & podešavanje"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Sada ćemo podesiti konekciju %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Sada ćemo podesiti konekciju %s.\n"
-"\n"
-"\n"
-"Pritisnite OK za nastavak."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Podešavanje mreže"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Pošto radite mrežnu instalaciju, vaša mreža je već podešena.\n"
-"Kliknite na Ok da zadržite tu konfiguraciju ili Odustani za podešavanje vaše "
-"Internet & Mrežne konekcije.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Dobro došli u Čarobnjak za podešavanje mreže\n"
-"\n"
-"Sada ćemo podesiti vašu internet/mrežnu konekciju.\n"
-"Ako ne želite da koristite automatsko prepoznavanje, isključite opciju.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Izaberite profil za podešavanje"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Koristi auto prepoznavanje"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Prepoznajem uređaje..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normalna modemska konekcija"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detektovan na portu %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN konekcija"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detektovan %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL konekcija"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detektovan na interfejsu %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kablovska konekcija"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "otkrivena kablovska konekcija"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN konekcija"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "prepoznata ethernet kartica(e)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Izaberite konekciju koju želite podesiti"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Podesili ste nekoliko načina za konekciju na Internet.\n"
-"Izaberite jedan od njih koji ćete koristiti.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet konekcija"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Da li želite pokrenuti konekciju prilikom boota?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Podešavanje mreže"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Potrebno je restartovati mrežu"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Došlo je do problema prilikom restartovanja mreže:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Čestitamo, podešavanje mreže i interneta je završeno.\n"
-"\n"
-"Sada će ova konfiguracija biti primjenjena na vaš sistem.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Nakon što je to gotovo, preporučujemo da restartujete vaš X\n"
-"okoliš kako bi se izbjegao problem sa promjenom naziva računara."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Došlo je do problema prilikom podešavanja.\n"
-"Provjerite vašu konekciju pomoću net_monitor ili mcc. Ako vaša konekcija ne "
-"radi, možete ponovo pokrenuti podešavanje"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"UPOZORENJE: Ovaj uređaj je prethodno podešen za konekciju na Internet.\n"
-"Samo prihvatite kako bi ovaj uređaj ostao podešen.\n"
-"Izmjena polja ispod će prepisati ovu konfiguraciju."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Molimo unesite IP konfiguraciju za ovaj računar.\n"
-"Svaka stavka bi trebala biti unesena kao IP adresa u decimalnoj notaciji\n"
-"razdvojenoj tačkama (npr. 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Podešavam mrežni uređaj %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (drajver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatska IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa treba biti u formatu 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Molimo unesite naziv vašeg računara ako ga znate.\n"
-"Naziv vašeg računara bi trebao biti puno-kvalifikovani naziv,\n"
-"kao što je ``mojcomp.mojlab.mojafirma.com''.\n"
-"Možete također unijeti IP adresu gateway-a ako ga imate"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (tj. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway uređaj"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Konfiguracija proxija"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Otkrij id mrežne karte (korisno za laptope)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy treba biti http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy treba biti ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet konfiguracija"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Da li se želite pokušati spojiti na Internet sada?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Probavam vašu konekciju..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sistem je sada spojen na Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Iz sigurnosnih razloga, sada će biti odspojen."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Izgleda da sistem nije spojen na Internet.\n"
-"Probajte promjeniti postavke vaše konekcije."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Podešavanje konekcije"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Molimo ispunite ili provjerite polje ispod"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ kartice"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memorija kartice (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO kartice"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 kartice"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 kartice"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Vaš lični broj telefona"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Naziv provajdera (npr. provajder.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Broj telefona provajdera"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Provider dns 1 (opcionalno)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Provider dns 2 (opcionalno)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Izaberite vašu državu"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Način biranja broja"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Brzina konekcije"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Timeout konekcije (u sek.)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Login naloga (korisničko ime)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Šifra naloga"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montiranje nije uspjelo: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Extended particije nisu podržane na ovoj platformi"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Imate rupu u vašoj tabeli particija li je ja ne mogu upotrijebiti.\n"
-"Jedino rješenje je da pomjerite vaše primarne particija kako bi rupa bila "
-"pored extended particija"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Povratak iz datoteke %s nije uspio: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Loša backup datoteka"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Greška u pisanju datoteke: %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Nešto loše se dešava na vašem disku. \n"
-"Test integriteta podataka nije uspio. \n"
-"To znači će da pisanje bilo čeka na disk rezultirati smećem"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "obavezno"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "važno"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "vrlo fino"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "fino"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "možda"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokalni štampač"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Udaljeni štampač"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Štampač na udaljenom CUPS serveru"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Štampač na udaljenom lpd serveru"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Mrežni štampač (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Štampač na SMB/Windows 95/98/NT serveru"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Štampač na NetWare serveru"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Unesite URI uređaja štampača"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Spoji zadatak na komandu"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Nepoznat model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokalni štampači"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Udaljeni štampači"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " na paralelnom portu \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB štampač \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", višenamjenski uređaj na paralelnom portu \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", višenamjenski uređaj na USBu"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", višenamjenski uređaj na HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", višenamjenski uređaj"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", štampa u %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "na LPD serveru \"%s\", štampač \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "na Windows serveru \"%s\", share \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "na Novell serveru \"%s\", štampač \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", koristeći komandu %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Sirovo štampanje (Bez drajvera)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(na ovom računaru)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na CUPS serveru \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Default)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Izaberi konekciju štampača"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kako je štampač povezan na računar?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Ovdje ne morate podešavati štampače na udaljenim CUPS serverima;\n"
-"ovi štampači će biti automatski prepoznati."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Podešavanje CUPSa"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Navedite CUPS server"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Da biste dobili pristup štampačima na udaljenim CUPS serverima u vašoj "
-"lokalnoj mreži, ne morate podešavati ništa; CUPS serveri automatski "
-"informišu vaš računar o svojim štampačima. Svi štampači koji su trenutno "
-"poznati vašem računaru su izlistani u odjeljku \"Udaljeni štampači\" glavnog "
-"prozora Printerdrake-a. Ako vaš CUPS server nije u lokalnoj mrežu, morate "
-"unijeti IP adresu CUPS servera i eventualno broj porta kako biste dobili "
-"informacije o štampačima sa servera, inače ostavite ova polja praznim."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa treba biti u formatu 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Broj porta treba biti cijeli broj!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP CUPS servera"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatska konfiguracija CUPSa"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Prepoznajem uređaje ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Testiraj portove"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Dodaj novi štampač"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Dobro došli u Čarobnjak za podešavanje štampača\n"
-"\n"
-"Ovaj čarobnjak vam omogućuje da instalirate lokalne ili udaljene štampače "
-"koji će biti korišteni sa ovog računara, a također i sa drugih računara na "
-"mreži.\n"
-"\n"
-"On će od vas tražiti sve potrebne informacije kako bi štampač bio podešen, a "
-"vama omogućen pristup svim dostupnim drajverima, opcijama drajvera i vrstama "
-"konekcije štampača."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokalni štampač"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Dobro došli u Čarobnjak za podešavanje štampača\n"
-"\n"
-"Ovaj čarobnjak će vam pomoći da instalirate vaš(e) štampač(e) koji su "
-"povezani na ovaj računar.\n"
-"\n"
-"Molim uključite štampač(e) na ovom računaru i uključite ih. Kliknite na "
-"dugme \"Dalje\" kada budete spremni, a na \"Odustani\" ako ne želite da "
-"podesite vaše štampače sada.\n"
-"\n"
-"Obratite pažnju da neki računari mogu krahirati tokom automatskog "
-"prepoznavanja štampača. Isključite opciju \"Automatski prepoznaj štampače\" "
-"ako je ovo slučaj kod vas. Koristite \"Ekspertni mod\" printerdrake-a ako "
-"želite da podesite štampanje na udaljenom štampaču a printerdrake ga ne "
-"izlista automatski."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Automatski prepoznaj štampače"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Čestitamo, vaš štampač je sada instaliran i podešen!\n"
-"\n"
-"Možete štampati koristeći komandu \"Štampaj\" u vašoj aplikaciji (obično se "
-"nalazi u meniju \"Datoteka).\n"
-"\n"
-"Ako želite dodati, ukloniti ili promjeniti ime štampača, ili ako želite "
-"promjeniti neke podrazumjevane postavke (ulazni put papira, kvaliteta "
-"štampe...), izaberite opciju \"Štampač\" u \"Hardware\" sekciji Mandrake "
-"Kontrolnog centra."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatsko prepoznavanje štampača"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake može automatski prepoznati štampače koji su spojeni lokalno "
-"putem paralelne ili USB veze, ali zapamtite da na nekim sistemima automatsko "
-"prepoznavanje MOŽE ZALEDITI VAŠ SISTEM, ŠTO MOŽE VODITI DO OŠTEČENJA "
-"DATOTEČNIH SISTEMA! Zato ovo radite NA VAŠU ODGOVORNOST!\n"
-"\n"
-"Da li zaista želite da vaši štampači budu prepoznati automatski?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Koristi auto prepoznavanje"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Ručno podesite štampač"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Detektovan %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Štampač na paralelnom portu \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB štampač \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Nije pronađen nijedan lokalni štampač! Ako želite ručno instalirati štampač, "
-"unesite ime uređaja / ime datoteke na ulaznu liniju (Paralelni portovi: /dev/"
-"lp0, /dev/lp1, ..., ekvivalentno LPT1:, LPT2:, ..., prvi USB štampač: /dev/"
-"usb/lp0, drugi USB štampač: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Morate unijeti naziv uređaja ili datoteke!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Nije pronađen nijedan lokalni štampač!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Mrežni štampači mogu biti instalirani samo nakon završetka instalacije. "
-"Izaberite \"Hardware\" i zatim \"Štampač\" u Mandrake Kontrolnom centru."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Da instalirate mrežne štampače, kliknite na \"Odustani\", prebacite na "
-"\"Ekspert mod\" i kliknite ponovo na \"Dodaj novi štampač\"."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Sljedeći štampač je prepoznat automatski: ako to nije onaj koji želite "
-"podesiti, uneiste naziv uređaja / naziv datoteke u ulaznu liniju"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Ovo je lista svih automatski prepoznatih štampača. Molimo izaberite štampač "
-"koji želite podesiti ili unesite naziv uređaja / naziv datoteke na ulaznu "
-"liniju"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Sljedeći štampač je prepoznat automatski. Podešavanje štampača će raditi "
-"potpuno automatski. Ako vaš štampač nije ispravno prepoznat ili ako želite "
-"sami podesiti štampač, uključite \"Ručno podešavanje\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Ovo je lista svih automatski prepoznatih štampača. Molim odaberite štampač "
-"koji želite podesiti. Podešavanje štampača će raditi potpuno automatski. Ako "
-"vaš štampač nije ispravno prepoznat ili ako želite sami podesiti štampač, "
-"uključite \"Ručno podešavanje\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Molimo izaberite port na koji je vaš štampač povezan ili unesite naziv "
-"uređaja / naziv datoteke na ulaznoj liniji"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Molimo izaberite na koji port je priključen vaš štampač."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalentno sa LPT1:, "
-"LPT2:, ..., prvi USB štampač: /dev/usb/lp0, drugi USB štampač: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Morate izabrati ili unijeti štampač / uređaj!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Ručno podešavanje"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Da li je vaš štampač višenamjenski uređaj od HPa (OfficeJet, PSC, "
-"PhotoSmart, LaserJet 1100/1200/1220/3200/3300 sa skenerom)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Instaliram HPOJ paket..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Provjeravam uređaj i podešavam HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Instaliram SANE paket..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skeniram na vašem HP višenamjenskom uređaju"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Omogućujem CUPSu port štampača ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Čitam bazu podataka o štampačima ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opcije udaljenog lpd štampača"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Da biste koristili udaljeni lpd štampač, morate dati ime računara za printer "
-"server i ime štampača na tom serveru."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Ime udaljenog računara"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Ime udaljenog štampača"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Ime udaljenog računara nedostaje!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Ime udaljenog štampača nedostaje!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcije SMB (Windows 9x/NT) štampača"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Da biste štampali na SMB štampač, morate dati ime SMB računara (Pažnja! Ono "
-"može biti različito od TCP/IP imena!) i eventualno IP adresu print servera, "
-"kao i share naziv štampača kojem želite pristupiti i korisničko ime, šifru i "
-"informacije o radnoj grupi."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB server ime"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB server IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Share naziv"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Radna grupa"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Treba biti dato ili ime servera ili IP adresa servera!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Naziv samba share-a nedostaje!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opcije NetWare štampača"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Da biste štampali na NetWare štampač, trebate dati naziv NetWare print "
-"servera (Pažnja! Ono može biti različito od njegovog TCP/IP imena!) kao i "
-"naziv reda za štampu na štampaču kojem želite pristupiti i eventualno "
-"korisničko ime i šifru."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printer Server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Naziv reda za štampu"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP naziv servera nedostaje!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP naziv reda nedostaje!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/socket opcije štampača"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Da biste štampali na TCP ili socket štampač, morate dati hostname štampača i "
-"opcionalno broj porta. Na HP JetDirect serverima broj porta je obično 9100, "
-"na ostalim serverima on može varirati. Pogledajte priručnik vašeg hardware-a."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Hostname štampača"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Hostname štampača nedostaje!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI uređaja štampača"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Možete dati direktno URI za pristup štampaču. URI mora zadovoljavati ili "
-"CUPS ili Foomatic specifikacije. Obratite pažnju da nisu svi tipovi URIja "
-"podržani od svih spoolera."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Trebate unijeti ispravan URI!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Svakom štampaču treba dati ime (npr. \"stampac\"). Polja Opis i Lokacija "
-"nije potrebno popuniti. Oni su komentari za korisnike."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Naziv štampača"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Opis"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lokacija"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Pripremam bazu podataka o štampačima..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Model vašeg štampača"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake je uporedi ime modela koje je dobijeno od automatskog "
-"prepoznavanja štampača sa modelima koji su navedeni u njegovoj bazi podataka "
-"kako bi našao najbliži. Ovaj izbor možda nije tačan, pogotovo ako vaš "
-"štampač uopšte nije naveden u bazi. Stoga provjerite da li je izbor ispravan "
-"i ako je tako kliknite \"Model je ispravan\", u suprotnom kliknite "
-"\"Izaberite model ručno\" kako biste ručno izabrali vaš model štampača na "
-"sljedećem ekranu.\n"
-"\n"
-"Za vaš štampač Printerdrake je našao:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Model je ispravan"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Izaberite model ručno"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Izbor modela štampača"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Koji model štampača imate?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Molim provjerite da li je Printerdrake izvršio ispravno automatsko "
-"prepoznavanje modela vašeg štampača. Potražite ispravan model na listi ako "
-"kursor stoji na pogrešnom modelu ili na \"Raw štampač\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Ako štampač nije naveden, izaberite kompatibilan (pogledajte uputstva za "
-"štampač) ili sličan."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Podešavanje OKI winprinter-a"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Sada podešavate OK laserski winprinter. Ovi štampači\n"
-"koriste jedan poseban komunikacijski protokol i stoga rade samo kada su "
-"spojeni na prvom paralelnom portu. Ako je vaš štampač spojen na neki drugi "
-"port ili na print server molimo spojite štampač na prvi paralelni port prije "
-"nego što odštampate testnu stranicu. Inače štampač neće raditi. Drajver će "
-"ignorisati vaše podešenje tipa konekcije."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Podešavanje Lexmark inkjet-a"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkjet drajveri za štampu koje obezbjeđuje Lexmark podržavaju samo lokalne "
-"štampače, a ne i štampače na udaljenim računarima ili print serverima. "
-"Molimo spojite vaš štampač na lokalni port ili ga podesite na računaru na "
-"koji je spojen."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Da biste mogli štampati sa vašim Lexmark inkjetom na ovoj konfiguraciji, "
-"potrebni su vam inkjet drajveri za štampu koje obezbjeđuje Lexmark (http://"
-"www.lexmark.com/). Idite na US stranicu i kliknite na dugme \"Drivers\". "
-"Zatim izaberite vaš model a zatim \"Linux\" kao operativni sistem. Drajveri "
-"dolaze u vidu RPM paketa ili shell skripte sa interaktivnom grafičkom "
-"instalacijom. Ne morate obaviti ovu konfiguraciju na grafičkom interfejsu. "
-"Odustanite odmah nakon licencnog ugovora. Zatim odštampaje stranice za "
-"poravnavanje glava sa \"lexmarkmaintain\" i podesite opcije poravnanja glave "
-"pomoću ovog programa."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Podrazumjevane opcije štampača\n"
-"\n"
-"Trebate provjeriti da su veličina papira i tip tinte (ako je dostupno) "
-"ispravno podešeni. Obratite pažnju da za voma veliku kvalitetu / rezoluciju "
-"štampa može postati znatno sporija."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opcija %s mora biti cijeli broj!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opcija %s mora biti broj!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opcija %s izvan raspona!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Da li želite da podesite ovaj štampač (\"%s\")\n"
-"kao podrazumjevani štampač?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testna stranica"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Molimo izaberite testne stranice koje ćete štampati.\n"
-"Pažnja: foto testna stranica može tražiti dosta vremena za štampu a na "
-"laserskim štampačima sa malo memorije možda neće nikad ni izaći. U većini "
-"slučajeva dovoljno je odštampati standardnu testnu stranicu."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Nijedna testna strana"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Štampaj"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standardna testna strana"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternativna testna strana (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternativna testna strana (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Foto testna strana"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Nemoj štampati testnu stranicu"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Štampam testnu stranicu..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testna stranica je poslana štampaču.\n"
-"Može potrajati određeno vrijeme dok štampač krene.\n"
-"Status štampanja:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testna stranica je poslana štampaču.\n"
-"Može potrajati određeno vrijeme dok štampač krene.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Da li je radilo ispravno?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Sirovi štampač"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Za štampanje datoteke sa komandne linije (terminalski prozor) možete "
-"koristiti ili komandu \"%s <datoteka>\" ili grafički alat za štampu: \"xpp "
-"<datoteka>\" ili \"kprinter <datoteka>\". Grafički alati vam omogućuju da "
-"jednostavno odaberete štampač i izmjenite podešenja opcija.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ove komande možete također koristiti u polju \"Komanda za štampu\" u "
-"dijalozima za štampu mnogih aplikacija, ali ovdje ne morate navesti ime "
-"datoteke jer tu datoteku obezbjeđuje sama aplikacija.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Komanda \"%s\" također omogućava izmjenu opcija za pojedinačni zadatak "
-"štampe. Jednostavno dodajte željena podešenja na komandnu liniju, npr. \"%s "
-"<datoteka>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Za listu opcija koje su dostupne za trenutni štampač ili pročitajte listu "
-"koja je data ispod ili kliknite na dugme \"Lista opcija za štampu\".%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Ovo je lista mogućih opcija za štampu za trenutni štampač:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Za štampanje datoteke sa komandne linije (terminalski prozor) koristite "
-"komandu \"%s <datoteka>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ovu komandu također možete koristiti u polju \"Komanda za štampu\" u "
-"dijalozima za štampu mnogih aplikacija. Ovdje nije potrebno navesti naziv "
-"datoteke jer tudatoteku obezbjeđuje sama aplikacija.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Za listu opcija koje su dostupne za trenutni štampač kliknite na dugme "
-"\"Lista opcija za štampu\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Za štampanje datoteke sa komandne linije (terminalski prozor) koristite "
-"komandu \"%s <datoteka>\" ili \"%s <datoteka>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Možete također koristiti grafički interfejs \"xpdq\" za podešavanje opcija i "
-"upravljanje zadacima štampe.\n"
-"Ako koristite KDE okruženje radne površine imate \"dugme za paniku\". To je "
-"ikona na radnoj površini čiji je naziv \"ZAUSTAVI štampač!\", koja "
-"zaustavlja sve zadatke štampe odmah kada kliknete na nju. Ovo je korisno "
-"npr. u slučaju zaglavljivanja papira.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Komande \"%s\" i \"%s\" također omogućavaju izmjenu opcija za pojedinačni "
-"zadatak štampe. Jednostavno dodajte željena podešenja na komandnu liniju, "
-"npr. \"%s <datoteka>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Zatvori"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Štampam/skeniram na \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Štampam na štampač \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Lista opcija za štampu"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Vaš HP višenamjenski uređaj je automatski konfigurisan kako bi mogao "
-"skenirati. Sada možete skenirati sa komandne linije pomoću komande "
-"\"scanimage\" (\"scanimage -d hp:%s\" kako biste naveli scanner ako imate "
-"više od jednog) ili koristeći grafičke okoline \"xscanimage\" ili \"xsane\". "
-"Ako koristite GIMP, možete također skenirati koristeći odgovarajuću stavku u "
-"meniju \"File\"/\"Acquire\". Za više informacija, pogledajte još i \"man "
-"scanimage\" i \"man sane-hp\" na komandnoj liniji.\n"
-"\n"
-"Nemojte koristiti \"scannerdrake\" za ovaj uređaj!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Vaš HP višenamjenski uređaj je automatski konfigurisan kako bi mogao "
-"skenirati. Sada možete skenirati sa komandne linije pomoću komande \"ptal-hp "
-"%s scan ...\". Skeniranje putem grafičkog interfejsa ili iz GIMPa još nije "
-"podržano za vaš uređaj. Više informacija možete naći u datoteci\"/usr/share/"
-"doc/hpoj-0.8/ptal-hp-scan.html\" na vašem računaru. Ako imate HP LaserJet "
-"1100 ili 1200, možete skenirati samo ako ste instalirali opciju za "
-"skeniranje.\n"
-"\n"
-"Nemojte koristiti \"scannerdrake\" za ovaj uređaj!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Čitam podatke o štampaču..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Premještanje konfiguracije štamapča"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Možete kopirati konfiguraciju štampača koju ste napravili za spooler %s u % "
-"s, vaš trenutni spooler. Svi podaci o konfiguraciji (naziv štampača, opis, "
-"lokacija, tip konekcije kao i podrazumjevane opcije) će biti preuzeti, ali "
-"zadaci štampe neće biti prebačeni.\n"
-"Svi redovi ne mogu biti prebačeni zbog sljedećih razloga:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ne podržava štampače na Novell serverima ili štampačekoji šalju podatke "
-"u komandama slobodnog oblika.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podržava samo lokalne štampače, udaljene LPD štampačei Socket/TCP "
-"štampače.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD i LPRng ne podržavaju IPP štampače.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Pored toga, redovi koji nisu kreirani ovim programom ili sa \"foomatic-"
-"configure\" ne mogu biti premješteni."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Također štampači konfigurisani sa PPD datotekama koje su osigurali njihovi "
-"proizvođači ili sa vlastitim CUPS drajverima ne mogu biti prebačeni."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Označite štampače koje ćete prebacivati i kliknite na \n"
-"\"Prebaci\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Nemoj prebacivati štampače"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Prebaci"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Štampač pod imenom \"%s\" već postoji pod %s: \n"
-"Kliknite na \"Prebaci\" da to prepišete.\n"
-"Možete također unijeti novo ime ili preskočiti ovaj štampač."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Naziv štampača bi se trebao sastojati od slova, brojeva i donje linije"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Štampač \"%s\" već postoji,\n"
-"da li sigurno želite prepisati ovu konfiguraciju?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Novo ime štampača"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Prebacujem %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Prebacili ste vaš bivši podrazumjevani štampač (\"%s\"),Da li će to također "
-"biti podrazumjevani štampač podnovim sistemom štampe %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Osvježavam podatke o štampaču..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Podešavanje udaljenog štampača"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Pokrećem mrežu..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Sada podesite mrežu"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Mrežna funkcionalnost nije podešena"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Sada ćete podesiti udaljeni štampač. Ovo zahtjeva aktivan pristup mreži, ali "
-"vaša mreža još uvijek nije podešena. Ako želite nastaviti bez podešavanja "
-"mreže, nećete moći koristiti štampač koji sada podešavate. Kako želite da "
-"nastavimo?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Nastavi bez podešavanja mreže"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Podešavanje mreže koje je napravljeno tokom instalacije sada ne može biti "
-"pokrenuto. Molim provjerite da li će mreža postati dostupna nakon bootanja "
-"sistema i popravite podešenja koristeći Mandrake Kontrolni centar, sekcija "
-"\"Mreža i Internet\"/\"Konekcija\", a zatim podesite štampač, ponovo "
-"koristeći Mandrake Kontrolni centar, sekcija \"Hardver\"/\"Štampač\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Mrežni pristup nije aktivan i nije mogao biti pokrenut. Molimo provjerite "
-"vašu konfiguraciju i vaš hardware. Onda ponovo pokušajte podesiti udaljeni "
-"štampač."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Restartujem sistem za štampu ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "visok"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoičan"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaliram sistem za štampu na sigurnosnom nivou: %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Sada ćete instalirati sistem za štampu %s na sistemu koji je na sigurnosnom "
-"nivou % s.\n"
-"\n"
-"Ovaj sistem za štampu pokreće demon (pozadinski proces) koji čeka zadatke "
-"štampe i rješava ih. Ovom demonu takođe mogu pristupiti drugi računari putem "
-"mreže, tako da je to moguća tačka napada. Stoga se tek rijetki od odabranih "
-"demona pokreću na ovom sigurnosnom nivou.\n"
-"\n"
-"Da li zaista želite podesiti štampanje na ovom računaru?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Pokrećem sistem za štampu tokom boota"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Sistem za štampu (%s) se neće pokrenuti automatski prilikom boota računara.\n"
-"\n"
-"Moguće je da je automatsko pokretanje isključeno prilikom promjene na viši "
-"nivo sigurnosni, pošto je sistem za štampu moguća tačka napada.\n"
-"\n"
-"Da li želite da ponovo uključite automatsko pokretanje sistema za štampu?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Provjeravam instalirani software..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Uklanjam LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Uklanjam LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Izaberite spooler štampača"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Koji sistem štampanja (spooler) želite koristiti?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Podešavam štampač \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Instaliram Foomatic..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opcije štampača"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Pripremam PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Podešavam aplikacije..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Da li želite podesiti štampanje?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Sistem štampe: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Sljedeći štampači su podešeni. Dvokliknite na štampač da promjenite njegove "
-"postavke; da ga učinite podrazumjevanim štampačem; da vidite informacije o "
-"njemu; ili da učinite štampač na udaljenom CUPS serveru upotrebljivim iz "
-"Star Office/OpenOffice.org-a."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Sljedeli štampači su podešeni. Kliknite dva puta na neki od njih za izmjenu "
-"postavki; ako ga želite učiniti podrazumjevanim štampačem; ili da biste "
-"vidjeli informacije o njemu."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Osvježi listu štampača (kako bi bili prikazani svi dostupni CUPS štampači)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Promjenite sistem štampe"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normalni mod"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Želite li podesiti još jedan štampač?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Izmjeni konfiguraciju štampača"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Štampač %s\n"
-"Šta želite da izmjenite na ovom štampaču?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Uradi!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tip konekcije štampača"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Naziv štampača, opis, lokacija"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Proizvođač štampača, model, drajver"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Proizvođač štampača, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Podesi štampač kao podrazumjevani"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Dodaj ovaj štampač u Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Ukloni ovaj štampač iz Star/Open Offica"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Štampaj testnu stranicu"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Saznaj kako koristiti ovaj štampač"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Ukloni štampač"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Uklanjam stari štampač \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Podrazumjevani štampač"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Štampač \"%s\" je sada podešen kao podrazumjevani štampač."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Dodajem štampač u Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Štampač \"%s\" je uspješno dodan u Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Nisam uspio dodati štampač \"%s\" u Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Uklanjam štampač iz Star/Open Offica"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "Štampač \"%s\" je uspješno uklonjen iz Star/Open Offica."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Nisam uspio ukloniti štampač \"%s\" iz Star/Open Offica."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Da li želite da uklonite štampač \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Uklanjam štampač \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Podešavanje proxija"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Dobro došli u alat za podešavanje proxija.\n"
-"qn Ovdje ćete biti u prilici da podesite vaše http i ftp proxije\n"
-"sa ili bez logina i šifre\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Molimo popunite informacije o http proxiju\n"
-"Ostavite polja praznim ako ne želite http proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url treba počinjati sa 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Port treba biti broj"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Molimo popunite informacije o ftp proxiju\n"
-"Ostavite polja praznim ako ne želite ftp proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url treba počinjati sa 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Molimo unesite login i šifru za proxy, ako su potrebni.\n"
-"Ostavite polja praznim ako ne želite login/šifru"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "šifra"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ponovo unesite šifru"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Šifre se ne poklapaju. Pokušajte opet!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne mogu dodati particiju na _formatiran_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ne mogu pisati datoteku %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid nije uspio"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid nije uspio (možda nedostaju raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nema dovoljno particija za RAID nivo %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Pokreni ALSA zvučni sistem (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron periodični pokretač komandi."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd se koristi za nadgledanje statusa baterija i logovanje preko\n"
-"sysloga. Također se može koristiti za gašenje računara kada su baterije "
-"potrošene."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Pokreće komande zakazane putem at komande u vrijeme koje je zadato\n"
-"prilikom pokretanja at-a, te pokreće pozadinske komande kada je nizak "
-"prosječni nivo opterećenja."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardan UNIX program koji pokreće programe koje zada korisnik\n"
-"u periodičnim terminima. vixie cron dodaje veći broj mogućnosti osnovnom\n"
-"UNIX cronu, uključujući bolju sigurnost i moćnije opcije za podešavanje."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM dodaje podršku za miša tekst-baziranim aplikacijama kao što je\n"
-"Midnight Commander. On također omogućuje konzolne isjeci/zaljepi operacije\n"
-"pomoću miša i uključuje podršku za pop-up menije na konzoli."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake pokreće probavanje hardware-a i opcionalno konfiguriše\n"
-"novi/izmjenjeni hardware."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache je World Wide Web server.  Koristi se za posluživanje HTML\n"
-"datoteka i CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Demon za nadgledanje Interneta (obično nazvan inetd) pokreće\n"
-"raznolike druge Internet servise po potrebi. Odgovoran je za pokretanje\n"
-"raznih servisa, kao što su telnet, ftp, rsh i rlogin. Isključivanje inetd-a\n"
-"isključuje sve servise za koje je on nadležan."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pokrenite filtriranje paketa za Linux kernel seriju 2.2 kako\n"
-"biste postavili firewall i zaštitili vaš računar od mrežnih napada."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ovaj paket učitava izabranu mapu tastature kao što je podešeno u\n"
-"/etc/sysconfig/keyboarc.  Ovo može biti izabrano korištenjem kbdconfig\n"
-"programa. Možete ovo ostaviti uključenim na većini računara."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatsko regenerisanje kernel zaglavlja u /boot za\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatsko prepoznavanje i podešavanje hardware-a tokom boota."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf će ponekad obaviti raznolike zadatke tokom boota\n"
-"kako bi se održala sistemska konfiguracija."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je demon za štampu koji je potreban da bi lpr radio ispravno.\n"
-"To je u osnovi server koji dodjeljuje zadatke štampe štampaču/ima."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtuelni Server, koristi se za izgradnju servera visokih performansi\n"
-"i dostupnosti."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je Domain Name Server (DNS) koji se koristi za pretvaranje "
-"imena računara u IP adrese."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montira i demontira sve Network File System (NFS), SMB (Lan\n"
-"Manager/Windows) i NCP (NetWare) tačke montiranja."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivira/deaktivira sve mrežne interfejse koji su konfigurisani\n"
-"za pokretanje tokom boota."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreža.\n"
-"Ovaj servis omogućuje funkcionalnost NFS servera, koji je podešen putem\n"
-"/etc/exports datoteke."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreža.\n"
-"Ovaj servis omogućuje NFS funkcionalnost zaključavanja datoteka."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatski uključuje numlock bravu tipaka pod konzolom i\n"
-"XFree tokom boota."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podrška za OK 4w i kompatibilne windows štampače"
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA podrška je obično za podržavanje stvari kao što je\n"
-"ethernet i modemi u laptopima.  Neće se pokrenuti dok se ne\n"
-"konfiguriše tako da je sigurno imati ga instaliranog na računarima\n"
-"kojima nije potreban."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper upravlja RPC konekcijama, koje koriste protokoli kao što\n"
-"su NFS i NIS. Portmap server mora raditi na računarima koje služe kao\n"
-"serveri za protokole koji koriste RPC mehanizam."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix je Mail Transport Agent, tj. program koji šalje poštu sa jednog "
-"računara na drugu."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Spašava i vraća sistemski raspon entropije za veću kvalitetu\n"
-"generisanja slučajnih brojeva."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Dodjeljuje sirove uređaje blokovskim urećajima (kao što su\n"
-"particije hard diska) za upotrebu aplikacijama kao što je Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed demon omogućuje da se automatska IP tabela rutiranja podešava\n"
-"preko RIP protokola. Mada se RIP često koristi na malim mrežama, "
-"kompleksniji\n"
-"protokoli rutiranja su potrebni za složene mreže."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokol omogućava korisnicima na mreži da dobave\n"
-"mjeru performansi za svaki računar na toj mreži"
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokol omogućava korisnicima na mreži da identificiraju\n"
-"ko je prijavljen na ostalim računarima."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokol omogućava udaljenim korisnicima da dobiju listu svih\n"
-"korisnika prijavljenih na računar na kojem radi rwho demon (slično fingeru)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Pokreće zvučni sistem na vašem računaru"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je pogodnost pomoću koje mnogi demoni zapisuju poruke\n"
-"u razne sistemske dnevnike.  Dobra ideja je uvijek imati pokrenuti syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Pokreće drajvere za vaše usb uređaje."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Pokreće X Font Server (ovo je nužno da bi XFree radio)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izaberite koji servisi se trebaju pokretati automatski prilikom boota"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Štampa"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Dijeljenje datoteka"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistem"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Udaljena administracija"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Server baze podataka"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servisi: %d aktiviran za %d registrovan"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servisi"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "aktivan"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zaustavljen"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servisi i demoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nema dodatnih informacija\n"
-"o ovom servisu, izvinite."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Prilikom boota"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Hvala vam što ste odabrali Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Dobro došli u svijet otvorenog izvornog koda"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Uspjeh MandrakeSofta je baziran na principima Slobodnog softvera. Vaš novi "
-"operativni sistem je rezultat zajedničkog rada dijela Linux zajednice širom "
-"svijeta"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Pridružite se svijetu Slobodnog softvera"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Upoznajte Open Source zajednicu i postanite njen član. Učite, podučavajte i "
-"pomozite drugima tako što ćete pristupiti mnogim forumima za diskusiju koje "
-"ćete naći na našim \"Community\" stranicama"
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet i razmjena poruka"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 pruža najbolji softver za pristup svemu što Internet "
-"pruža: Pretražujte web i pregledajte animacije pomoću Mozilla-e i "
-"Konquerora, razmjenjujte email i organizirajte vaše lične podatke pomoću "
-"Evolution i KMail-a, i mnogo drugog"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedija i grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 vam omogućuje da potjerate vaš multimedijalni računar do "
-"krajnjih granica! Koristite najnoviji softver za slušanje muzike i audio "
-"datoteka, mijenjajte i organizujte vaše slike i fotografije, gledajte TV i "
-"video-snimke i mnogo drugog"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Programiranje"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 je najbolja platforma za razvoj aplikacija. Otkrijte moć "
-"GNU gcc kompajlera kao i najboljih razvojnih okolina koje su Open Source"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrolni centar"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Mandrake Linux 8.2 Kontrolni centar je jedinstvena lokacija za puno "
-"prilagođavanje i podešavanje vašeg Mandrake sistema"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Korisnički okoliš"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 nudi vam na izbor 11 različitih grafičkih desktop okolina "
-"i window managera uključujući GNOME 1.4, KDE 2.2.2, Window Maker 0.8 i druge"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Serverski softver"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Pretvorite vaš računar u moćan server sa svega nekoliko klikova mišem: Web "
-"server, email, firewall, file i print server, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Igre"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 pruža najbolje Open Source igre - arkadne, akcione, "
-"karte, sportovi, strategije, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Želite li naučiti Linux jednostavno, brzo i besplatno? MandrakeSoft vam nudi "
-"besplatno učenje Linuxa kao i način za testiranje vašeg napretka na "
-"MandrakeCampus-u -- našem online centru za obuku"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Kvalitetna podrška od strane Linux zajednice i MandrakeSofta nalazi se odmah "
-"iza ugla. A ako ste već Linux veteran, postanite \"Expert\" i dijelite vaše "
-"znanje na našem web sajtu za podršku"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Za sve vaše IT projekte, naši konsultanti su spremni da analiziraju vaše "
-"potrebe i ponude prilagođeno rješenje. Iskoristite veliko iskustvo "
-"MandrakeSofta kao proizvođača Linux rješenja kako biste ponudili pravu IT "
-"alternativu za vaš biznis"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Čitav raspon Linux rješenja, kao i posebne ponude za proizvode i "
-"'potrepštine', dostupni su u našoj online radnji"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Za više informacija o MandrakeSoftovim profesionalnim uslugama i "
-"komercijalnoj ponudi, molimo posjetite sljedeću web stranicu:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instaliram pakete..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ne mogu čitati vašu tabelu particija, previše je oštećena za mene :(\n"
-"Pokušaću izbrisati loše particije"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Greška!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ne mogu pronaći potrebnu image datoteku '%s'"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Podešavanje auto instalacije"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Sada ćete podesiti Auto Instalacijsku disketu. Ova opcija je pomalo opasna i "
-"mora biti korištena uz pažnju.\n"
-"\n"
-"Sa ovom opcijom bićete u mogućnosti da ponovite instalaciju koju ste obavili "
-"na ovom računaru, pri ćemu ćete biti interaktivno upitani za neke korake, "
-"kako biste promjenili njihove vrijednosti.\n"
-"\n"
-"Za maksimalnu sigurnost, particioniranje i formatiranje nikad neće biti "
-"obavljeno automatski, bez obzira šta izaberete tokom instalacije na ovaj "
-"računar.\n"
-"\n"
-"Da li želite nastaviti?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Automatska konfiguracija koraka"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Molimo izaberite za svaki korak da li ćete ga ponoviti kao i u vašoj "
-"instalaciji ili će se obaviti ručno"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Dobro došli.\n"
-"\n"
-"Parametri automatske instalacije su dostupni u odjeljcima lijevo"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Čestitamo!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa je uspješno napravljena.\n"
-"Sada možete ponoviti vašu instalaciju."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Auto instalacija"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Dodaj stavku"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Ukloniti zadnju stavku"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Izvještaj \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Izvještaj o demonima\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Detalji izvještaja\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "ukupno napredak"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Backup-uj sistemske datoteke..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Datoteke backup-a hard diska..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Backup-uj korisničke datoteke..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Napredak backup-a hard diska..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Backup-uj ostale datoteke..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"lista datoteka poslana putem FTPa : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) problem sa FTP konekcijom: Nije bilo moguće poslati vaše backup datoteke "
-"putem FTPa.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Greška tokom slanja pošte. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Izbor datoteka"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Izaberite datoteke ili direktorije i kliknite na 'Dodaj'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Molimo uključite sve potrebne opcije.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Ove opcije mogu spasiti ili vratiti sve datoteke u vašem /etc direktoriju.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Backup sistemskih datoteka. ( /etc direktorij )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Koristi inkrementalni backup  (nemoj prebrisati stare backupe)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Zaobiđi kritične datoteke (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Sa ovom opcijom bićete u mogućnosti da vratite bilo koju\n"
-" verziju vašeg /etc direktorija."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Molimo izaberite sve korisnike koje želite uključiti u vaš backup."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Ne uključuj spremnik web preglednika"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Koristi inkrementalni backup  (nemoj prebrisati stare backupe)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Ukloni izabrano"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Korisnici"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Koristi FTP vezu za backup"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Molimo unesite ime računara ili IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Molimo unesite direktorij za\n"
-" smještaj backupa na ovom računaru."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Molimo unesite vaš login"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Molimo unesite vašu šifru"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Zapamti ovu šifru"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP konekcija"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Sigurna konekcija"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Koristi CD/DVDROM za backup"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Molimo izaberite vaš CD prostor"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Molim uključite ako koristite CDRW medij"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Molim uključite ako želite obrisati vaš CDRW prije"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Molim izaberite ako želite uključiti\n"
-" instalacijski boot na CDu."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Molim unesite naziv uređaja vašeg CD Writera\n"
-" npr: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Koristi traku za backup"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Molim unesite ime uređaja kojeg ćete koristiti za backup"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Molim unesite maksimalnu veličinu\n"
-" dozvoljenu za Draxbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Molimo unesite direktorij za spasiti:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Koristi quotu za backup datoteke."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Mreža"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "svakog sata"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "dnevno"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "sedmično"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "mjesečno"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Koristi demon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Izaberite vremenski interval\n"
-"između svakog backupa"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Molim izaberite medij\n"
-"za backup."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Koristi hard disk sa demonom"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Koristi FTP sa demonom"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Molim budite sigurni da je cron demon aktiviran u vašim servisima."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Pošalji mail izvještaj nakon svakog backupa na :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Šta"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Gdje"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Kada"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Više opcija"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Podešavanje Drakbackup-a"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Molimo izaberite gdje želite backupovati"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "na hard disk"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "preko mreže"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Molim izaberite šta želite backupovati"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Backup sistema"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Backup korisnika"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Ručno izaberite korisnika"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Izvori backup-a: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- sistemske datoteke:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- korisničke datoteke:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- ostale datoteke:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- spasi na hard disku u direktoriju : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- spasi na FTPu na računaru : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t korisničko ime: %s\n"
-"\t\t u direktoriju: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Opcije:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tNe uključuj sistemske datoteke\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackupi koriste tar i bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackupi koriste tar i gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Demon (%s) uključuje :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Hard disk.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Mrežu preko FTPa.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Mrežu preko SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Bez podešavanja, molim kliknite na Čarobnjak ili Napredno.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lista podataka za vraćanje:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lista oštećenih podataka:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Molimo isključite ili pobrišite ga idući put."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Backup datoteke su oštećene"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Svi vaši izabrani podaci su          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          uspješno spašeni na %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Vrati konfiguraciju       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK za vraćanje ostalih datoteka."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Lista korisnika za vraćanje (samo najsvježiji datum po korisniku je značajan)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Vrati sistemske datoteke prije:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "molim izaberite datum za vraćanje"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Koristi hard disk za backup"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Vrati sa hard diska"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Molim unesite direktorij gdje su smješteni backupi"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Izaberite drugi medij za vraćanje"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Drugi medij"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Vrati sistem"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Vrati korisnike"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Vrati ostalo"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "izaberite stazu za vraćanje (umjesto / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Izvrši novi backup prije vraćanja (samo za inkrementalni backup.)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Pobriši korisničke direktorije prije vraćanja."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Vrati sve backupe"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Ručno vraćanje"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Pomoć"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Prethodni"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Spasi"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Izgradi backup"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Vrati"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Sljedeći"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Molimo pokrenite Izgradi backup prije vraćanja...\n"
-" ili provjerite da li je put za spašavanje ispravan."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Greška tokom sendmaila\n"
-"  vaš mail izvještaj nije poslan\n"
-"  Molim podesite sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lista paketa za instalaciju"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Greška tokom slanja datoteke preko FTPa.\n"
-" Molimo ispravite vašu FTP konfiguraciju."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Molim izaberite podatke za vraćanje..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Molim izaberite medij za backup..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Molim izaberite podatke za backup..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Nije pronađena konfiguraciona datoteka \n"
-"molim kliknite na Čarobnjak ili Napredno."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "U izradi ... molim sačekajte."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Backup sistemskih datoteka"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Backup korisničkih datoteka"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Backup ostalih datoteka"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Ukupan napredak"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "slanje datoteka putem FTPa"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Šaljem datoteke..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Lista podataka koji će biti smješteni na CDROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Molim unesite brzinu cd pisača"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Molim unesite naziv uređaja vašeg CD pisača (ex: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Molim uključite ako želite imati instalacioni boot na vašem CDu."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Backup-uj sada iz konfiguracijske datoteke"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Pogledaj postavke backupa."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Čarobnjak za podešavanje"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Napredno podešavanje"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Backup-uj sada"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Neke greške prilikom slanja poruka može izazvati \n"
-" loše podešen postfix. Ovo možete riješiti tako što ćete\n"
-" podesiti myhostname ili mydomain u /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalacija %sa nije uspjela. Javila se sljedeća greška:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Pretraži instalirane fontove"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Isključi instalirane fontove"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "obradi sve fontove"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "nije pronađen nijedan font"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "gotovo"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "ne mogu naći nijedan font na montiranim particijama"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Ponovo izaberi ispravne fontove"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "ne mogu naći nijedan font.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Pretraži fontove na listi instaliranih"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopiranje fontova"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Instalacija True Type fontova"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "molimo sačekajte tokom ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Završena True Type instalacija"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konverzija fontova"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "type1inst kreiranje"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referenciranje"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf fonts konverzija"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm fonts konverzija"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Onemogući privremene datoteke"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Restartuj XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Onemogući datoteke fontova"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "restart xfs-a"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Prije instaliranja fontova, provjerite da li imate dozvole da ih koristite i "
-"instalirate na va[em sistemu.\n"
-"\n"
-"-Možete instalirati fontove koristeći uobičajen način. U rijetkim "
-"slučajevima, neispravni fontovi mogu zaglaviti vaš X Server."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Uvoz fontova"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Preuzmi fontove iz Windowsa"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Deinstaliraj fontove"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Napredne opcije"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Lista fontova"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Izaberite aplikacije koje će podržavati fontove :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Razni štampači"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Izaberite font datoteku ili direktorij i kliknite na 'Dodaj'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Lista instalacije"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "kliknite ovdje ako ste sigurni."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "ovdje ako ne."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Ništa izabrano"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Sve izabrano"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Pobriši listu"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Probni inicijali"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopiraj fontove na sistem"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Instaliraj i konvertuj fontove"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Post Install"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Pobriši fontove sa mog sistema"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Post Uninstall"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Dijeljenje Internet konekcije"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Dijeljenje Internet konekcije je trenutno aktivno"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Dijeljenje Internet konekcije je već podešeno. Trenutno je\n"
-"aktivno.\n"
-"\n"
-"Šta želite uraditi?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "isključi"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "otkaži"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "rekonfiguriši"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Isključujem servere..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Dijeljenje Internet konekcije je sada isključeno."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Dijeljenje Internet konekcije je trenutno neaktivno"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Dijeljenje Internet konekcije je već podešeno. Trenutno je\n"
-"neaktivno.\n"
-"\n"
-"Šta želite uraditi?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "uključi"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Uključujem servere..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Dijeljenje Internet konekcije je sada uključeno."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Sada ćete konfigurisati vaš računar za dijeljenje Internet konekcije.\n"
-"Sa ovom opcijom, ostali računari na vašoj lokalnoj mreži će moći koristiti "
-"Internet konekciju ovog računara. \n"
-"\n"
-"Napomena: potreban vam je poseban Mrežni adapter da biste podesili Lokalnu "
-"mrežu (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfejs %s (koristeći modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfejs %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nema mrežnog adaptera na vašem sistemu!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Na vašem sistemu nije pronađen nijedan ethernet mrežni adapter. Molimo "
-"pokrenite alat za podešavanje hardware-a."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Mrežni interface"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Trenutno je samo jedan mrežni adapter podešen na vašem sistemu:\n"
-"\n"
-"%s\n"
-"\n"
-"Sada ću podesiti vašu Lokalnu mrežu sa ovim adapterom."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Molimo izaberite koji mrežni adapter će biti spojen na vašu Lokalnu mrežu."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Mrežni interfejs je već podešen"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Upozorenje, mrežni adapter (%s) je već podešen.\n"
-"\n"
-"Da li želite automatsko ponovno podešavanje?\n"
-"\n"
-"To možete obaviti ručno, ali morate znati šta radite."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatsko ponovno podešavanje"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Prikaži postavke trenutnog interfejsa"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Trenutna konfiguracija `%s':\n"
-"\n"
-"Mreža: %s\n"
-"IP adresa: %s\n"
-"IP atributi: %s\n"
-"Drajver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Mogu zadržati trenutnu konfiguraciju i pretpostaviti da ste već podesili "
-"DHCP server; u tom slučaju molim provjerite da li sam ispravno pročitao "
-"mrežu C klase koju ćete koristiti na lokalnoj mreži; neću je ponovo podesiti "
-"i neću mijenjati vaše postavke DHCP servera.\n"
-"\n"
-"Ako ne, mogu ponovo podesiti vaš interfejs i podesiti DHCP server za vas.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Lokalna mreža C klase"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP adresa (ovog) DHCP servera"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Ponovo podesi interfejs i DHCP server"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Lokalna mreža se ne završava sa `.0', izlazim."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencijalan konflikt LAN adresa pronađen u trenutnoj konfiguraciji %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Otkrivena konfiguracija firewalla!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Upozorenje! Pronađena je postojeća konfiguracija firewalla. Možda će biti "
-"potrebno neko ručno podešavanje nakon instalacije."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Podešavam..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Podešavam skripte, instaliram software, pokrećem servere..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemi tokom instaliranja paketa %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Sve je konfigurisano.\n"
-"Sada možete dijeliti Internet konekciju sa ostalim računarima na vašoj "
-"lokalnoj mreži, koristeći automatsku mrežnu konfiguraciju (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Podešavanje je već završeno, ali je trenutno isključeno."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Podešavanje je već završeno i trenutno je uključeno."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Dijeljenje Internet konekcije nije nikad podešeno."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Podešavanje dijeljenja Internet konekcije"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Dobrodošli u alat za Dijeljenje Internet konekcije!\n"
-"\n"
-"%s\n"
-"\n"
-"Kliknite na Podesi da pokrenete čarobnjak."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Podešavanje mreže (%d adaptera)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil:"
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Briši profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil za brisanje:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Novi profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Naziv profila koji će biti kreiran (novi profil je kreiran kao kopija "
-"postojećeg) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Hostname: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Pristup Internetu"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tip:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfejs:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Molim sačekajte"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Podesi Internet pristup..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Podešavanje LANa"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Drajver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfejs"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Podesi Lokalnu mrežu..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Kliknite ovdje za pokretanje čarobnjaka ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Čarobnjak..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Primjeni"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Molimo sačekajte... Primjenjujem konfiguraciju"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Konektovan"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nije konektovan"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Konektuj se..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Prekini konekciju..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Upozorenje, otkrivena je druga Internet konekcija, možda preko vaše mreže"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemate nijedan podešen interfejs.\n"
-"Podesite ih prvo klikajući na 'Podesi'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Podešavanje LANa"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Boot protokol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Pokrenut na bootu"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "pokreni sada"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "zaustavi sada"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Interfejs još nije podešen.\n"
-"Pokrenite čarobnjak za podešavanje u glavnom prozoru"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nemate nijednu Internet konekciju.\n"
-"Napravite jednu klikajući na 'Podesi'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Podešavanje Internet konekcije"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Podešavanje Internet konekcije"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tip konekcije: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet kartica"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Podešavanje nivoa sigurnosti"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolni centar"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Izaberite alat koji želite koristiti"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kablovska)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (kablovska)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Kina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japan (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japan (kablovska)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Istočna Evropa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irska"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Zapadna Evropa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australija"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Novi Zeland"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Južna Afrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Molim,\n"
-"unesite vaš tv standard i državu"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV standard :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Oblast :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Pretraga TV kanala je u toku ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Tražim TV kanale"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "upotreba: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Molimo izaberite izgled vaše tastature."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Želite li da BackSpace vrati Delete u konzoli?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Promjenite CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Molimo ubacite Instalacioni CD u vaš CD-ROM uređaj i pritisnite Ok kad ste "
-"spremni.\n"
-"Ako ga nemate, pritisnite Odustani da bi se izbjegao live upgrade."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ne mogu da pokrenem live upgrade !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Izmjena je napravljena, ali da bi stupila na snagu morate se odjaviti"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Prikaži samo za izabrani dan"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/File/_New"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Datoteka/_Otvori"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Datoteka/_Sačuvaj"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Datoteaka/Sačuvaj _kao"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Datoteka/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcije"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcije/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Pomoć"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Pomoć/_O programu..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Korisnik"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Poruke"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Objašnjenja Mandrake alata"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "pretraživanje"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Alat za pregled vaših logova"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Podešavanja"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "matching"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "but not matching"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Izaberi datoteku"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalendar"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Sadržaj datoteke"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Mail/SMS obavijest"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "molim sačekajte, parsiram datoteku: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Podešavanje Mail/SMS obavijesti"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Dobro došli u aplikaciju za podešavanje mail/SMSa.\n"
-"\n"
-"Ovdje možete podesiti sistem obavještavanja.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "postavke servisa"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Možete primiti obavještenje ako neki od izabranih servisa prestane raditi"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "postavka opterećenja"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-"Primićete upozorenje ako je opterećenje (system load) veće od ove vrijednosti"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "postavka upozorenja"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Podesite način na koji će vas sistem obavijestiti"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Sačuvaj kao..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Molimo izaberite vrstu vašeg miša."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nije pronađen serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emuliraj treće dugme?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s je pronađen na %s, podesi ga ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Izaberite skener"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Ovaj %s skener nije podržan"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Boot uređaj"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Ovaj %s skener se mora podesiti iz printerdrake-a.\n"
-"Možete pokrenuti printerdrake iz Mandrake Kontrolnog centra u odjeljku "
-"Hardware."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Podešavanje firewalla"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Podešavanje firewalla"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Već ste podesili firewall.\n"
-"Kliknite na Podesi kako bi se izmjenio ili uklonio firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Kliknite na Podesi za podešavanje standardnog firewalla"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Izaberite svoj jezik"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Izaberite klasu instalacije"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Prepoznavanje hard diska"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Podešavanje miša"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Izaberite vašu tastaturu"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sigurnost"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Podešavanje datotečnih sistema"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatiranje particija"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Izaberite pakete za instalaciju"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Sistem instalacije"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Dodajte korisnika"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Podešavanje mreže"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Podešavanje servisa"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instalacija bootloadera"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Napravite boot disketu"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Podešavanje X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Instaliraj sistemske update"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Napusti instalaciju"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall podešavač\n"
-"\n"
-"On podešava lični firewall za ovaj Mandrake Linux računar.\n"
-"Za moćnu soluciju posebnog firewalla, molimo pogledajte\n"
-"specijaliziranu MandrakeSecurity Firewall distribuciju."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Sada ćemo vam postaviti pitanja o servisima kojima želite dozvoliti\n"
-"pristup sa Interneta.  Molimo razmislite pažljivo o ovim pitanjima,\n"
-"jer je sigurnost vašeg računara bitna.\n"
-"\n"
-"Molimo vas, ako trenutno ne koristite neki od ovih servisa, isključite\n"
-"ga firewallom.  Možete izmjeniti ove postavke kad god želite ponovnim\n"
-"pokretanjem ove aplikacije!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut web server na ovom računaru za koji želite da ga\n"
-"cijeli Internet vidi? Ako imate pokrenut webserver kojem ćete pristupati\n"
-"samo sa ovog računara, možete slobodno ovdje odgovoriti NE.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut name server (DNS) na ovom računaru? Ako niste\n"
-"podesili DNS radi davanja informacija o IP i zoni cijelom Internetu, \n"
-"molimo vas odgovorite ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Da li želite da dozvolite ulazne Secure Shell (ssh) konekcije? Ovo\n"
-"je zamjena za telnet koju možete koristiti za prijavu. Ako sada koristite\n"
-"telnet, definitivno trebate preći na ssh. Telnet nije kriptovan, tako\n"
-"da neki napadači mogu ukrasti vašu šifru ako ga koristite. ssh je\n"
-"kriptovan i ne dozvoljava ovo prisluškivanje."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Da li želite dozvoliti ulazne telnet konekcije?\n"
-"Ovo je užasno nesigurno, kao što je objašnjeno na prethodnom\n"
-"ekranu. Strogo preporučujemo da odgovorite Ne ovdje i koristite\n"
-"ssh umjesto telneta.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Da li imate pokrenut FTP server za koji želite da je pristupačan sa\n"
-"Interneta? Ako da, onda strogo preporučujemo da ga koristite samo\n"
-"za anonimne transfere. Bilo koju šifru koja je poslana putem FTPa\n"
-"mogu ukrasti napadači, pošto FTP također ne koristi kriptovanje.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut mail server ovdje? Ako šaljete poruke\n"
-"kroz pine, mutt ili neki drugi tekst-bazirani mail klijent, onda\n"
-"vjerovatno imate.  U suprotnom, trebali biste isključiti ovo \n"
-"firewallom.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut POP ili IMAP server ovdje? Ovo bi\n"
-"bilo korišteno za smještaj ne-web-baziranih mail naloga\n"
-"za ljude na ovom računaru.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Čini se da koristite 2.2 kernel.  Ako je vaša mrežna IP\n"
-"automatski podešena putem računara u vašoj kući ili\n"
-"uredu (dinamički dodjeljena), moramo ovo dozvoliti.  Da\n"
-"li je ovo slučaj?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Da li vaš računar sinhronizuje vrijeme sa drugim računarom?\n"
-"Najčešće, ovo se koristi u srednje velikim Unix/Linux organizacijama\n"
-"za sinhronizaciju vremena za pravljenje dnevnika i slično.  Ako\n"
-"niste dio većeg ureda i niste čuli za ovo, onda vjerovatno\n"
-"ovo nije slučaj."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Podešavanje završeno.  Možemo li zapisati ove izmjene na disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ne mogu otvoriti %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ne mogu otvoriti %s za pisanje: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Ne, ne treba mi DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Da, treba mi DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Ne, ne treba mi NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Da, treba mi NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Nemoj snimiti"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Snimi i izađi"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Čarobnjak za podešavanje firewalla"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Ne (isključi pristup sa interneta)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Da (dozovoli pristup sa interneta)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Molim sačekajte... Provjeravam instalirane pakete"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Greška prilikom instaliranja paketa : %s i Bastille.\n"
-" Pokušajte ih instalirati ručno."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Mrežni računar (klijent)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, ssh server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Ured"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome Radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Alati za vaš Palm Pilot ili Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domain Name i Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Uredski programi: obrada teksta (kword, abiword), tablični alati (kspread, "
-"gnumeric), pdf preglednici itd."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Alati vezani za zvuk: mp3 ili midi playeri, mixeri itd."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knjige i Howto-i na temu Linuxa i Slobodnog Software-a"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedija - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Skup alata za mail, news, web, prenos datoteka i chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Baze podataka"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ili MySQL baza podataka"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Alati za lakše podešavanje računara"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedija - Zvuk"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Korisni programi"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacija"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Alati za konzolu"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix mail server, Inn news server"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet stanica"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedijalna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Podešavanje"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Druge grafičke okoline (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, osnovno grafičko okruženje sa izborom pratećih alata"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafičko okruženje"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Alati za pravljenje i prženje CDova"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Uredska radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itd."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafički programi kao što je Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C i C++ razvojne biblioteke, programi i include datoteke"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Network Computer server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Stanica za igru"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video playeri i editori"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedija - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zabavni programi: arkadne igre, igre za tablu, strategije itd."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Skup alata za čitanje i slanje pošte i news-a (pine, mutt, tin...) i "
-"pregledanje Weba"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhiviranje, emulatori, nadzor"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Lične finansije"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafički okoliš sa skupom korisnički orjentisanih aplikacija i alata za "
-"radnu površinu"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klijenti za razne protokole uključujući ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programi za pregled i editovanje zvuka i videa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Ostale grafičke okoline"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editori, ljuske, datotečni alati, terminali"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programi za upravljanje vašim finansijama, kao što je gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Upravljanje ličnim informacijama"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedija - Prženje CDa"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Znanstvena radna stanica"
-
-#~ msgid "About"
-#~ msgstr "O programu"
-
-#~ msgid "             Help           "
-#~ msgstr "             Pomoć           "
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-2,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Ne mogu pristupiti kernel modulima koji odgovaraju vašem kernelu "
-#~ "(nedostaje datoteka %s)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Nijedan"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Izaberite default štampač!"
-
-#~ msgid ""
-#~ "With remote CUPS servers, you do not have to configure any printer here; "
-#~ "CUPS servers inform your machine automatically about their printers. All "
-#~ "printers known to your machine currently are listed in the \"Default "
-#~ "printer\" field. Choose the default printer for your machine there and "
-#~ "click the \"Apply/Re-read printers\" button. Click the same button to "
-#~ "refresh the list (it can take up to 30 seconds after the start of CUPS "
-#~ "until all remote printers are visible). When your CUPS server is in a "
-#~ "different network, you have to give the CUPS server IP address and "
-#~ "optionally the port number to get the printer information from the "
-#~ "server, otherwise leave these fields blank."
-#~ msgstr ""
-#~ "Sa udaljenim CUPS serverom, ne morate podešavati nijedan\n"
-#~ "štampač ovdje; CUPS serveri obavještavaju vaš računar automatski\n"
-#~ "o svojim štampačima. Svi štampači koji su trenutno poznati vašem\n"
-#~ "računaru su izlistani u polju \"Podrazumjevani štampač\". Izaberite "
-#~ "podrazumjevani\n"
-#~ "štampač za vaš računar ovdje i kliknite na dugme \"Primjeni/Ponovo\n"
-#~ "pročitaj štampače\". Kliknite na isto dugme za osvježavanje liste (može\n"
-#~ "trajati do 30 sekundi nakon pokretanja CUPSa dok svi udaljeni štampači\n"
-#~ "ne postanu vidljivi). Kada je vaš CUPS server u različitoj mreži, morate "
-#~ "dati\n"
-#~ "IP adresu CUPS servera i eventualno broj porta kako bi se dobavile "
-#~ "informacije\n"
-#~ "o štampačima sa servera, inače ostavite ova polja praznim."
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Primjeni/Ponovo pročitaj štampače"
-
-#~ msgid "Configure printing system"
-#~ msgstr "Podešavanje sistema štampe"
diff --git a/perl-install/share/po/ca.po b/perl-install/share/po/ca.po
deleted file mode 100644
index 0663d463f..000000000
--- a/perl-install/share/po/ca.po
+++ /dev/null
@@ -1,14978 +0,0 @@
-# drakX translation to Catalan
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# Copyright (c) 1999-2001 Softcatal�
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-04-10 23:29+0200\n"
-"Last-Translator: Softcatal� <traddrake@softcatala.org>\n"
-"Language-Team: Catalan\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configura tots els cap�als independentment"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Utilitza l'extensi� Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configura nom�s la targeta \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Configuraci� Multi-head"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"El vostre sistema permet l'�s d'una configuraci� de m�ltiples cap�als.\n"
-"Qu� voleu fer?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Targeta gr�fica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Seleccioneu una targeta gr�fica"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Escolliu un servidor X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Escolliu un servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Quina configuraci� de l'XFree voleu tenir?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La vostra targeta pot tenir acceleraci� 3D de maquinari, per� nom�s amb "
-"l'Xfree %s.\n"
-"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"La vostra targeta pot tenir acceleraci� 3D de maquinari amb l'Xfree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "Xfree %s amb acceleraci� 3D de maquinari"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"La vostra targeta pot tenir acceleraci� 3D de maquinari amb l'Xfree %s,\n"
-"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
-"PENJAR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s amb acceleraci� 3D de maquinari EXPERIMENTAL"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La vostra targeta pot tenir acceleraci� 3D de maquinari, per� nom�s amb "
-"l'Xfree %s,\n"
-"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
-"PENJAR.\n"
-"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configuraci� de l'XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Seleccioneu la mida de mem�ria de la vostra targeta gr�fica"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Escolliu les opcions per al servidor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Escolliu un monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Els dos par�metres m�s importants son la velocitat de refresc vertical, que\n"
-"�s la velocitat a qu� es refresca tota la pantalla, i el m�s important, la\n"
-"velocitat de sincronitzaci� horitzontal, que �s la velocitat a qu� es\n"
-"visualitzen les l�nies d'exploraci�.\n"
-"\n"
-"�s MOLT IMPORTANT que no especifiqueu un tipus de monitor amb un abast\n"
-"de sincronitzaci� superior a les possibilitats del vostre monitor, perqu�\n"
-"el podr�eu fer malb�.\n"
-"En cas de dubte, sigueu conservador amb aquest par�metre."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Velocitat de refresc horitzontal"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Velocitat de refresc vertical"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "El monitor no est� configurat"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "La targeta gr�fica encara no est� configurada"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Encara no s'han escollit les resolucions"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Voleu comprovar la configuraci�?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Av�s: la comprovaci� d'aquesta targeta gr�fica pot penjar-vos l'ordinador"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Comprova la configuraci�"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"intenteu canviar alguns par�metres"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "S'ha produ�t un error:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Sortida en %d segons"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "�s aquest el par�metre corrcte?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "S'ha produ�t un error, intenteu canviar alguns par�metres"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resoluci�"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Escolliu la resoluci� i la profunditat de color"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Targeta gr�fica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Servidor xFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "M�s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "D'acord"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Mode expert"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mostra'ls tots"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resolucions"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Disposici� del teclat: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipus de ratol�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositiu del ratol�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sincronitzaci� horitzontal del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Refresc vertical del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Targeta gr�fica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Targeta gr�fica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Mem�ria gr�fica: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profunditat del color: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resoluci�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor xFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador de l'xFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "S'est� preparant la configuraci� de l'X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Qu� voleu fer?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Canvia el monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Canvia la targeta gr�fica"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Canvia les opcions del servidor"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Canvia la resoluci�"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostra la informaci�"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Torna-ho a comprovar"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Surt"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Voleu conservar els canvis?La configuraci� actual �s:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X a l'inici"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Puc configurar el vostre ordinador de manera que executi X autom�ticament "
-"durant l'arrencada.\n"
-"Voleu que X s'inici� quan torneu a arrencar l'ordinador?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Si us plau, torneu a entrar a %s per activar els canvis"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Si us plau, sortiu i utilitzeu Ctrl-Alt-Enrere"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 colors (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32.768 colors (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65.536 colors (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milions de colors (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4.294 milions de colors (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB o m�s"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA est�ndard, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 a 87 Hz entrella�ada (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrella�ada, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA ampliada, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA no entrella�ada, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA d'alta freq��ncia, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-freq��ncia que pot fer 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-freq��ncia que pot fer 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-freq��ncia que pot fer 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor que pot fer 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor que pot fer 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primer sector de la partici� d'arrencada"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primer sector de la unitat (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instal�laci� del SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "On voleu instal�lar el carregador d'arrencada?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instal�laci� del LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO amb men� de text"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO amb men� gr�fic"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Arrencada des de DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Opcions principals del carregador d'arrencada"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Carregador d'arrencada a utilitzar"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instal�laci� del carregador d'arrencada"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dispositiu d'arrencada"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (no funciona en BIOS antics)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compacte"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compacte"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Mode de v�deo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Demora abans d'arrencar la imatge predeterminada"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Contrasenya"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Contrasenya (un altre cop)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Limita les opcions de la l�nia d'ordres"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "limita"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Buida /tmp en cada arrencada"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Mida exacta de la RAM, si cal (s'han trobat %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Habilita perfils m�ltiples"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Introdu�u la mida de la RAM en Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"L'opci� ``Limita les opcions de la l�nia d'ordres'' no t� cap �s sense una "
-"contrasenya"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Si us plau, torneu-ho a intentar"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Les contrasenyes no coincideixen"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Missatge d'inicialitzaci�"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Demora de firmware obert"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Temps m�xim d'arrencada del nucli"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Voleu habilitar l'arrencada des de CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Voleu habilitar l'arrencada des d'OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "OS per defecte?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Aquestes s�n les diferents entrades.\n"
-"Podeu afegir-ne algunes m�s o canviar-ne les existents."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Afegeix"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Fet"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Modifica el RAID"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Quin tipus d'entrada voleu afegir?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Un altre SO (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Un altre SO (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Un altre SO (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imatge"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Arrel"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Afegeix"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lectura-escriptura"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Taula"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "No segur"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiqueta"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Predeterminat"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Elimina l'entrada"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "No es permet una etiqueta buida"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Heu de tenir una partici� d'intercanvi"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Aquesta etiqueta ja est� en �s"
-
-# #msgid "Found %s %s interfaces"
-# #msgstr "S'han trobat interf�cies %2$s %1$s"
-#: ../../any.pm_.c:656
-#, fuzzy, c-format
-msgid "Found %s %s interfaces"
-msgstr "S'han trobat interf�cies %2$s %1$s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "En teniu una altra?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Teniu alguna interf�cie %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "No"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "S�"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Mira la informaci� del maquinari"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "S'est� instal�lant el programa de control per a la targeta %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(m�dul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Quin programa de control %s he de provar?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"En alguns casos, el programa de control %s necessita informaci� addicional\n"
-"per funcionar correctament, tot i que normalment funciona b� sense ella.\n"
-"Voleu especificar opcions addicionals o deixar que el programa de control\n"
-"cerqui al vostre ordinador la informaci� que necessita? Aquesta recerca\n"
-"podria blocar l'ordinador, per� aix� no causaria cap dany."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Exploraci� autom�tica"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Especifica les opcions"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ara podeu proporcionar les seves opcions per al m�dul %s.\n"
-"Les opcions estan amb el format ``nom=valor nom2=valor2 ...''.\n"
-"Per exemple, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opcions del m�dul:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Ha fallat la c�rrega del m�dul %s.\n"
-"Voleu tornar-ho a intentar amb altres par�metres?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(ja s'ha afegit %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Aquesta contrasenya �s massa senzilla"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Si us plau, introdu�u un nom d'usuari"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"El nom d'usuari nom�s pot contenir lletres en min�scula, n�meros, `-' i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Aquest nom d'usuari ja s'ha afegit"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Afegeix un usuari"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introdu�u un usuari\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Accepta l'usuari"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nom real"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nom d'usuari"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Entrada autom�tica"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Puc configurar el vostre ordinador de manera que entri autom�ticament amb un "
-"nom d'usuari.\n"
-"Si no voleu utilitzar aquesta caracter�stica, feu clic al bot� Cancel�la."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Escolliu l'usuari per omissi�:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Escolliu el gestor de finestres per executar:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Podeu seleccionar altres idiomes, que quedaran disponibles despr�s de la "
-"instal�laci�"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Tots"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Afegeix un usuari"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personalitzada"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "S'est� iniciant el CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Quins paquets voleu instal�lar"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cancel�la"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Benvinguts, crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Est�ndard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alt"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Alt"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoic"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Aquest nivell s'ha d'utilitzar amb cura. Fa el vostre sistema molt m�s "
-"f�cil\n"
-"d'utilitzar, per� tamb� molt sensible: no s'ha d'utilitzar en un ordinador\n"
-"connectat a d'altres o a Internet. No s'hi accedeix mitjan�ant contrasenya."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ara, la contrasenya est� habilitada, per� l'�s com a ordinador de xarxa "
-"segueix sense ser recomanable."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Aquesta �s la seguretat est�ndard recomanada per a un ordinador que\n"
-"s'utilitzar� per connectar-se a Internet com a client. Ara hi ha "
-"comprovacions de seguretat."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Amb aquest nivell de seguretat, la utilitzaci� d'aquest sistema com a\n"
-"servidor esdev� possible.\n"
-"La seguretat �s ara prou alta com per utilitzar el sistema com a servidor\n"
-"que accepti connexions de molts clients. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Assumim les caracter�stiques del nivell 4, per� ara el sistema est�\n"
-"totalment tancat.\n"
-"Les caracter�stiques de seguretat estan al m�xim."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Escolliu el nivell de seguretat"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "S'est� establint el nivell de seguretat"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Escolliu les opcions per al servidor"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Benvingut al %s, el selector de sistema operatiu!\n"
-"\n"
-"Trieu un sistema operatiu de la lista superior, o espereu\n"
-"%d segons per arrencar en el sistema operatiu predeterminat.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Benvingut al GRUB, el selector de sistema operatiu!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Utilitzeu les tecles %c i %c per seleccionar quina posici� est� ressaltada."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Premeu Intro per arrencar el SO seleccionat, 'e' per editar les"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ordres pr�vies a l'arrencada, o 'c' per obtenir una l�nia d'ordres."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "La posici� ressaltada arrencar� autom�ticament dintre de %d segons."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "no hi ha prou espai a /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Escriptori"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Men� Inici"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "On voleu instal�lar el carregador d'arrencada?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "encara no s'ha implementat cap ajuda.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuraci� del tipus d'arrencada"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fitxer"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fitxer/_Surt"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor de categoritzaci� NewStyle"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor tradicional"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Gtk+ tradicional"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Executa l'Aurora durant l'arrencada"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Mode LILO/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Mode Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Benvingut a la utilitat de compartici� de la connexi� a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Feu clic a Configura per executar l'auxiliar de configuraci�."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configura"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Mode de sistema"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Executa el sistema X-Window en iniciar"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "No, no vull l'entrada autom�tica"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "S�, vull l'entrada autom�tica amb aquest (usuari, escriptori)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "D'acord"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "no es pot obrir /etc/inittab per a lectura: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "kB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuts"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minute"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segons"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "No puc afegir cap m�s partici�"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"Podeu seleccionar altres idiomes, que quedaran disponibles despr�s de la "
-"instal�laci�"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Fran�a"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belga"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Alemany"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grec"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Noruec"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Consulteu"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Itali�"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "s�rie"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Si us plau, feu primer una c�pia de seguretat de les vostres dades"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Llegiu-ho atentament!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Si penseu utilitzar aboot, assegureu-vos de deixar espai lliure (amb 2.048\n"
-"sectors n'hi ha prou) al comen�ament del disc"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Error"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistent"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Trieu una acci�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Teniu una partici� FAT gran\n"
-"(utilitzada normalment pel DOS/Windows de Microsoft).\n"
-"Suggereixo que primer en canvieu la mida\n"
-"(feu-hi clic i despr�s feu clic a \"Canvia la mida\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Si us plau, feu clic a una partici� "
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalls"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "ha fallat el muntatge"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Intercanvia"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Buit"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Altres"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipus de sistema de fitxers"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Crea"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Utilitzeu ``%s'' al seu lloc"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Suprimeix"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Utilitzeu primer ``Unmount''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Despr�s de canviar el tipus de la partici� %s, se'n perdran totes les dades"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Trieu una acci�"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Crea una nova partici�"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Normal > Expert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Expert > Normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Desf�s"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Voleu continuar igualment?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Surt sense desar"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Voleu sortir sense desar la taula de particions?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Voleu comprovar la configuraci�?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Assigna autom�ticament"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Buida-ho tot"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Informaci� del correu"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "S'utilitzen totes les particions prim�ries"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "No puc afegir cap m�s partici�"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Per tenir m�s particions, suprimiu-ne una per poder crear una partici� "
-"ampliada"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Escriu la taula de particions"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Rescata la taula de particions"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Rescata la taula de particions"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Rescata la taula de particions"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Muntatge autom�tic del suport extra�ble"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Seleccioneu el fitxer"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La c�pia de seguretat de la taula de particions no t� la mateixa mida\n"
-"Voleu continuar igualment?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Advert�ncia"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Inseriu un disquet a la unitat\n"
-"Se'n perdran totes les dades"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "S'est� intentant rescatar la taula de particions"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Informaci� del correu"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Punt de muntatge"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcions"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Canvia la mida"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Mou"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formata"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Munta"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Afegeix al RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Afegeix al LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmunta"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Elimina del RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Elimina del LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modifica el RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Utilitza per a loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Crea una nova partici�"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "sector d'inici: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Mida en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipus de sistema de fitxers: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punt de muntatge: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Prefer�ncia: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "S'est� formatant el fitxer de loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Canvia el tipus de partici�"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Quin sistema de fitxers voleu?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "On voleu muntar el fitxer de loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "On voleu muntar el dispositiu %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"No es pot anul�lar el punt de muntatge, perqu� aquesta partici�\n"
-"s'utilitza per al loopback. Elimineu primer el loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "S'estan calculant els l�mits del sistema de fitxers de la FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "S'est� canviant la mida"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "No es pot canviar la mida d'aquesta partici�"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Cal fer una c�pia de seguretat de totes les dades d'aquesta partici�"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Despr�s de canviar la mida de la partici� %s, se'n perdran totes les dades"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Escolliu la nova mida"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Mida en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "A quin disc us voleu despla�ar?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "A quin sector us voleu despla�ar?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "S'est� despla�ant"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "S'est� despla�ant la partici�..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Escolliu un RAID existent al qual afegir"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nou"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Escolliu un LVM existent al qual afegir"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Nom LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Aquesta partici� no es pot utilitzar per al loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nom del fitxer de loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nom real"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Un altre loopback ja est� utilitzant el fitxer, escolliu-ne un altre"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "El fitxer ja existeix. El voleu utilitzar?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Opcions del m�dul:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dispositiu"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivell"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "mida del tros"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Aneu amb compte: aquesta operaci� �s perillosa."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Quin tipus de particionament?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Fins al moment no puc acceptar crear el /boot a la unitat (a un cilindre > "
-"1024).\n"
-"O esteu utilitzant LILO, i no funcionar�, o no l'esteu utilitzant i no "
-"necessiteu el /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La partici� que heu seleccionat per afegir com a arrel (/) est� ubicada "
-"f�sicament m�s enll� del cilindre n� 1024 del disc dur, i no teniu cap "
-"partici� /boot.\n"
-"Si teniu previst utilitzar el gestor d'arrencada LILO, penseu d'afegir una "
-"partici� /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Heu seleccionat una partici� de programari RAID com a arrel (/).\n"
-"Aix� no ho pot gestionar cap carregador d'arrencada sense una partici� /"
-"boot.\n"
-"Per tant, assegureu-vos d'afegir una partici� /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "La taula de particions de la unitat %s s'escriur� al disc!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Us caldr� tornar a arrencar per tal que les modificacions tinguin efecte"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Despr�s de formatar la partici� %s, se'n perdran totes les dades"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "S'est� formatant"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "S'est� formatant el fitxer de loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "S'est� formatant la partici� %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "l'mkraid ha fallit"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "No hi ha prou espai lliure per assignar noves particions"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "No hi ha prou espai lliure per assignar noves particions"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Resoluci�: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dispositiu: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lletra d'unitat del DOS: %s (nom�s �s una suposici�)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipus: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nom: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inici: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Mida: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectors"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindre %d a cilindre %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Sense formatar\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Muntat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Fitxer(s) de loopback: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"La partici� s'ha arrencat per defecte\n"
-"    (per a l'arrencada de l'MS-DOS, no per a LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivell %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Mida del tros %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discs RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nom del fitxer de loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"�s possible que aquesta partici� sigui\n"
-"una partici� de programa de control;\n"
-"�s millor que no la toqueu.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Aquesta partici� Bootstrap\n"
-"especial �s per arrencar\n"
-"el vostre sistema en dual.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Mida: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindres, %s cap�als, %s sectors\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informaci�: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discs LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipus de taula de particions: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "al bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcions: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Tipus de sistema de fitxers: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Aquesta contrasenya �s massa senzilla (ha de tenir com a m�nim %d car�cters)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Les contrasenyes no coincideixen"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Canvia el tipus de partici�"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Si us plau, feu clic a una partici� "
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "servidor DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatatge de %s ha fallat"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "no s� com formatar %s amb el tipus %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "s'ha produ�t un error en muntar %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "senzill"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "No podeu utilitzar el JFS per a particions inferiors a 16 MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "No podeu utilitzar el ReiserFS per a particions inferiors a 32 MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Els punts de muntatge han de comen�ar amb una /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ja hi ha una partici� amb el punt de muntatge %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "No podeu utilitzar un volum l�gic LVM per al punt de muntatge %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Aquest directori s'ha de mantenir dins del sistema de fitxers de root"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Necessiteu un sistema de fitxers real (ext2, reiserfs) per a aquest punt de "
-"muntatge\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "No podeu utilitzar un volum l�gic LVM per al punt de muntatge %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "No hi ha prou espai per a l'assignaci� autom�tica"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "S'ha produ�t un error en obrir %s per escriure: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"S'ha produ�t un error: no s'han trobat dispositius v�lids on crear nous "
-"sistemes de fitxers. Si us plau, comproveu el vostre maquinari per trobar el "
-"problema"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "No teniu cap partici�!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Aquestes s�n les particions de Linux existents que s'han detectat a la\n"
-"vostra unitat de disc dur. Podeu conservar les eleccions fetes per "
-"l'assistent,\n"
-"s�n adequades per a un �s normal. Si les canvieu, heu de definir una "
-"partici�\n"
-"root (\"/\"); no escolliu una partici� massa petita, o no podreu instal�lar\n"
-"prou programari. Si voleu emmagatzemar les dades en una altra partici�, "
-"tamb�\n"
-"haureu de seleccionar una \"/home\" (nom�s si teniu m�s d'una partici� de\n"
-"Linux).\n"
-"\n"
-"\n"
-"Per a la vostra informaci�, cada partici� est� identificada d'aquesta "
-"manera: \"Nom\", \"Capacitat\".\n"
-"\n"
-"\n"
-"\"Nom\" es compon de: \"tipus d'unitat de disc\", \"n�mero d'unitat de disc"
-"\",\n"
-"\"n�mero de la partici�\" (per exemple, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipus d'unitat de disc\" �s \"hd\" si la vostre unitat de disc �s IDE i "
-"\"sd\"\n"
-"si �s SCSI.\n"
-"\n"
-"\n"
-"\"N�mero de la unitat de disc\" �s sempre una lletra despr�s d'\"hd\" o \"sd"
-"\".\n"
-"Amb unitats de disc IDE:\n"
-"\n"
-"   * \"a\" significa \"unitat de disc mestre en el controlador IDE primari"
-"\",\n"
-"\n"
-"   * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
-"\",\n"
-"\n"
-"   * \"c\" significa \"unitat de disc mestre en el controlador IDE secundari"
-"\",\n"
-"\n"
-"   * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
-"\".\n"
-"\n"
-"\n"
-"Amb les unitats de disc SCSI, una \"a\" significa \"unitat prim�ria de disc"
-"\", una \"b\" significa \"unitat secund�ria de disc\", etc..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Ara podeu triar quins serveis voleu que s'inici�n durant l'arrencada.\n"
-"\n"
-"\n"
-"Quan el ratol� passi sobre un element apareixer� un petit globus d'ajuda "
-"que\n"
-"explica la finalitat del servei.\n"
-"\n"
-"\n"
-"Aneu especialment amb cura en aquest pas si penseu utilitzar l'ordinador "
-"com\n"
-"a servidor: segurament no us interessar� iniciar serveis que no necessiteu.\n"
-"Recordeu que hi ha diversos serveis que poden ser perillosos si s'habiliten\n"
-"en un servidor.\n"
-"En general, seleccioneu nom�s els serveis que realment necessiteu."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Ara �s quan heu de decidir en quin lloc del vostre disc dur voleu "
-"instal�lar\n"
-"el sistema operatiu Mandrake Linux. Si el disc �s buit, o si un sistema\n"
-"operatiu existent n'utilitza tot l'espai disponible, us caldr� particionar-\n"
-"lo. B�sicament, particionar un disc dur consisteix en dividir-lo de manera\n"
-"l�gica per crear espai on instal�lar el nou sistema Mandrake Linux.\n"
-"\n"
-"\n"
-"At�s que els efectes d'aquest proc�s solen ser irreversibles, el "
-"particionament \n"
-"us pot espantar si sou un usuari sense experi�ncia.\n"
-"Aquest assistent simplifica aquest proc�s; abans de comen�ar, consulteu el\n"
-"manual i preneu-vos el temps que calgui.\n"
-"\n"
-"\n"
-"Necessiteu, com a m�nim, dues particions, una per al sistema operatiu en\n"
-"si i l'altra per a la mem�ria virtual (anomenada tamb� \"Intercanvi\").\n"
-"\n"
-"\n"
-"Si les particions ja s'han definit (en una instal�laci� anterior o "
-"mitjan�ant\n"
-"una altra eina de particionament), nom�s caldr� que seleccioneu les que "
-"voleu\n"
-"utilitzar per instal�lar el sistema Linux.\n"
-"\n"
-"\n"
-"Si les particions encara no s'han definit, les heu de crear.\n"
-"Per fer-ho, utilitzeu l'assistent que trobareu m�s amunt; segons la\n"
-"configuraci� del vostre disc dur, hi ha diverses solucions possibles:\n"
-"\n"
-"* Utilitzar una partici� existent: l'assistent ha detectat al vostre\n"
-"disc dur una o m�s particions de Linux existents. Si voleu conservar-les,\n"
-"escolliu aquesta opci�.\n"
-"\n"
-"\n"
-"* Esborrar completament el disc: si voleu suprimir totes les dades i\n"
-"particions que teniu al disc dur i substituir-les pel sistema Linux-\n"
-"Mandrake, podeu escollir aquesta opci�. Aneu amb compte, per�, perqu�,\n"
-"un cop la confirmeu, no podreu fer-vos enrere.\n"
-"\n"
-"\n"
-"* Utilitzar l'espai lliure de la partici� del Windows: si teniu el "
-"Microsoft\n"
-"Windows instal�lat al disc dur i n'ocupa tot l'espai diponible, us hi "
-"caldr�\n"
-"crear espai lliure per a les dades del Linux. Per fer-ho, podeu suprimir la\n"
-"partici� i les dades del Windows (consulteu les opcions \"Esborrar "
-"completament\n"
-"el disc\" o \"Mode expert\") o canviar la mida de la partici� del Windows;\n"
-"aquest canvi de mida es pot dur a terme sense cap p�rdua de dades. Aquesta\n"
-"opci� �s la m�s recomanable si voleu utilitzar tant el Mandrake Linux com "
-"el\n"
-"Microsoft Windows al mateix ordinador.\n"
-"\n"
-"\n"
-"  Abans de decidir-vos per aquesta opci�, tingueu en compte que la mida\n"
-"de la partici� del Microsoft Windows ser� m�s petita que ara. Aix� "
-"significa\n"
-"que tindreu menys espai lliure per emmagatzemar-hi dades o instal�lar-hi "
-"m�s\n"
-"programari.\n"
-"\n"
-"\n"
-"* Mode expert: si voleu particionar el disc dur manualment, podeu triar\n"
-"aquesta opci�. Aneu amb compte, perqu� �s molt potent per� tamb� perillosa;\n"
-"podeu perdre f�cilment totes les dades. Per tant, no trieu aquesta opci� "
-"tret\n"
-"que sapigueu exactament qu� esteu fent."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Les particions que s'acaben de definir s'han de formatar per poder-les\n"
-"utilitzar. El formatatge consisteix en crear-hi un sistema de fitxers).\n"
-"\n"
-"\n"
-"En aquest punt, potser voldreu tornar a formatar algunes de les particions\n"
-"existents per eliminar les dades que contenen. Si �s aix�, seleccioneu les\n"
-"particions que voleu formatar.\n"
-"\n"
-"\n"
-"Tingueu en compte que no cal tornar a formatar totes les particions que ja\n"
-"existien; heu de tornar a formatar les particions que contenen el sistema\n"
-"operatiu (com ara \"/\", \"/usr\" o \"/var\"), per� no les que contenen "
-"dades\n"
-"que voleu conservar (habitualment, /home).\n"
-"\n"
-"\n"
-"Aneu amb compte en seleccionar les particions; despr�s del formatatge, "
-"totes\n"
-"les dades s'hauran suprimit i no en podreu recuperar cap.\n"
-"\n"
-"\n"
-"Feu clic a \"D'acord\" quan estigueu a punt per formatar les particions.\n"
-"\n"
-"\n"
-"Feu clic a \"Cancel�la\" si voleu seleccionar altres particions per "
-"instal�lar\n"
-"el nou sistema Mandrake Linux."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"El nou sistema operatiu Mandrake Linux s'est� instal�lant. Aquesta\n"
-"operaci� trigar� uns quants minuts (dependr� de la mida total que\n"
-"hagueu escollit instal�lar i de la velocitat del vostre ordinador).\n"
-"\n"
-"Si us plau, tingueu paci�ncia."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Ara �s quan heu de decidir quina(es) partici�(ns) voleu utilitzar per\n"
-"instal�lar el sistems Mandrake Linux. Si ja s'han definit les particions "
-"(amb\n"
-"una instal�laci� anterior de GNU/Linux o mitjan�ant una altra eina de\n"
-"particionament), podeu utilitzar les particiones existents. En cas "
-"contrari,\n"
-"s'han de definir particions al disc dur.\n"
-"\n"
-"\n"
-"Per crear particions, primer heu de seleccionar un disc dur. Podeu "
-"seleccionar\n"
-"el disc que s'ha de particionar fent clic a \"hda\" per a la primera unitat\n"
-"IDE, \"hdb\" per a la segona o \"sda\" per a la primera unitat SCSI, etc.\n"
-"\n"
-"\n"
-"Per particionar el disc dur seleccionat, podeu utilitzar aquestes opcions:\n"
-"\n"
-"   * Buidar-ho tot: aquesta opci� suprimeix totes les particions que hi ha\n"
-"al disc dur seleccionat.\n"
-"\n"
-"\n"
-"   * Assignaci� autom�tica: aquesta opci� us permet crear autom�ticament "
-"les\n"
-"particions Ext2 i Intercanvi en l'espai lliure del disc dur.\n"
-"\n"
-"\n"
-"   * Rescatar la taula de particions: si la taula de particions est�\n"
-"malmesa, podeu intentar recuperar-la mitjan�ant aquesta opci�. Aneu\n"
-"amb compte i penseu que aix� pot fallar.\n"
-"\n"
-"\n"
-"   * Desfer: podeu utilitzar aquesta opci� per anul�lar els canvis.\n"
-"\n"
-"\n"
-"   * Tornar a carregar: podeu utilitzar aquesta opci� si voleu desfer\n"
-"tots els canvis i carregar la taula de particions inicial.\n"
-"\n"
-"\n"
-"   * Assistent: Si voleu utilitzar un assistent per particionar el disc "
-"dur,\n"
-"podeu utilitzar aquesta opci�, que �s la m�s recomanable si no teniu massa\n"
-"experi�ncia en particionament.\n"
-"\n"
-"\n"
-"   * Restaurar des de disquet: si, en una instal�laci� anterior, vau desar\n"
-"la taula de particions en un disquet, podeu recuperar-la mitjan�ant aquesta\n"
-"opci�.\n"
-"\n"
-"\n"
-"   * Desar en disquet: si voleu desar la taula de particions en un disquet\n"
-"per poder-la recuperar, podeu utilitzar aquesta opci�. �s molt recomanable\n"
-"que l'utilitzeu.\n"
-"\n"
-"\n"
-"   * Fet: quan hagueu acabat de particionar el disc dur, utilizeu aquesta\n"
-"opci� per desar els canvis.\n"
-"\n"
-"\n"
-"Per a la vostra informaci�, podeu accedir a qualsevol opci� mitjan�ant el "
-"teclat:\n"
-"moveu-vos per les particions amb la tecles Tab i Fletxa amunt/Fletxa avall.\n"
-"\n"
-"\n"
-"Quan s'ha seleccionat una partici�, podeu utilitzar:\n"
-"\n"
-"           * Ctrl+C per crear una nova partici� (quan se n'ha seleccionat\n"
-"una de buida)\n"
-"\n"
-"           * Ctrl+D per suprimir una partici�\n"
-"\n"
-"           * Ctrl+M per definir el punt de muntatge\n"
-"           \n"
-"\n"
-"           \n"
-"Si esteu fent la instal�laci� en un ordinador PPC, potser voldreu crear una\n"
-"petita partici� 'bootstrap' HFS d'un m�nim d'1 MB per a �s del carregador\n"
-"d'arrencada 'yaboot'. Si decidiu fer-la una mica m�s gran, per exemple de\n"
-"50 MB, us ser� d'utilitat per emmagatzemar un nucli de recanvi i una imatge\n"
-"del disc RAM per a situacions d'emerg�ncia durant l'arrencada."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"S'ha detectat m�s d'una partici� de Microsoft Windows en la unitat de disc.\n"
-"Si us plau, trieu quina d'elles voleu redimensionar per instal�lar el nou\n"
-"sistema operatiu Mandrake Linux.\n"
-"\n"
-"\n"
-"Per a la vostra informaci�, cada partici� est� identificada d'aquesta "
-"manera; \"Nom Linux\", \"Nom\n"
-"Windows\" \"Capacitat\".\n"
-"\n"
-"\"Nom Linux\" es compon de: \"tipus d'unitat de disc\", \"n�mero d'unitat de "
-"disc\",\n"
-"\"n�mero de la partici�\" (per exemple, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipus d'unitat de disc\" �s \"hd\" si la vostre unitat de disc �s IDE i "
-"\"sd\"\n"
-"si �s SCSI.\n"
-"\n"
-"\n"
-"\"N�mero de la unitat de disc\" �s sempre una lletra despr�s d'\"hd\" o \"sd"
-"\".\n"
-"Amb unitats de disc IDE:\n"
-"\n"
-"   * \"a\" significa \"unitat de disc mestre en el controlador IDE primari"
-"\",\n"
-"\n"
-"   * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
-"\",\n"
-"\n"
-"   * \"c\" significa \"unitat de disc mestre en el controlador IDE secundari"
-"\",\n"
-"\n"
-"   * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
-"\".\n"
-"\n"
-"\n"
-"Amb les unitats de disc SCSI, una \"a\" significa \"unitat prim�ria de disc"
-"\", una \"b\" significa \"unitat secund�ria de disc\", etc...\n"
-"\n"
-"\"Nom Windows\" �s la lletra de la vostra unitat de disc sota Windows (el "
-"primer disc o partici� s'anomena \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-"Si us plau, tingueu paci�ncia. Aquesta operaci� pot trigar diversos minuts."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Escolliu \"Instal�laci�\" si no teniu cap versi� anterior de Mandrake Linux\n"
-"instal�lada a l'ordinador o si voleu utilitzar diversos sistemes operatius.\n"
-"\n"
-"\n"
-"Escolliu \"Actualitzaci�\" si voleu actualitzar un versi� de Mandrake Linux "
-"que ja est� instal�lada.\n"
-"\n"
-"\n"
-"Segons els vostres coneixements de GNU/Linux, podeu escollir un dels "
-"nivells\n"
-"seg�ents d'instal�laci� o actualitzaci� del sistema operatiu Mandrake "
-"Linux:\n"
-"\n"
-"* Recomanada: si mai no heu instal�lat un sistema operatiu GNU/Linux,\n"
-"escolliu aquest. La instal�laci� ser� molt f�cil i nom�s se us faran\n"
-"unes poques preguntes.\n"
-"\n"
-"\n"
-"* Personalitzada: si coneixeu prou el GNU/Linux, podeu escollir l'�s\n"
-"principal (estaci� de treball, servidor, desenvolupament) del vostre\n"
-"sistema. Haureu de respondre m�s preguntes que en la instal�laci�\n"
-"\"Recomanada\", de manera que, si escolliu aquest tipus d'instal�laci�,\n"
-"haureu de saber com funciona el GNU/Linux.\n"
-"\n"
-"\n"
-"* Per a experts: si domineu el GNU/Linux, trieu aquest tipus\n"
-"d'instal�laci�. Com en el cas de la instal�laci� \"Personalitzada\"\n"
-"podreu escollir l'�s principal del vostre ordinador (estaci� de treball,\n"
-"servidor, desenvolupament). Aneu amb molt de compte abans de triar aquest\n"
-"tipus d'instal�laci�; podreu realitzar una instal�laci� altament\n"
-"personalitzada.\n"
-"  La resposta a algunes preguntes pot ser molt dif�cil si no teniu s�lids\n"
-"coneixements de GNU/Linux. Per tant, no escolliu aquest tipus "
-"d'instal�laci�\n"
-"tret que sapigueu qu� esteu fent."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Si us plau, seleccioneu el port correcte. Per exemple, el port COM1 en MS\n"
-"Windows s'anomena ttyS0 en GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"El LILO (Linux Loader, carregador de Linux) i el Grub s�n carregadors\n"
-"d'arrencada: poden arrencar el GNU/Linux o qualsevol altre sistema operatiu\n"
-"que tingueu a l'ordinador. Normalment, aquests altres sistemes operatius\n"
-"es detecten i instal�len correctament, per� si no �s aix�, podeu afegir-los\n"
-"manualment en aquesta pantalla. Aneu amb compte de triar els par�metres\n"
-"correctes.\n"
-"\n"
-"\n"
-"Tamb� �s possible que no volgueu donar acc�s a tothom a aquests sistemes\n"
-"operatius; en aquest cas podeu suprimir les entrades corresponents, per�\n"
-"aleshores us caldr� un disc d'arrencada per poder-los arrencar!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Heu d'indicar on voleu situar la informaci� necess�ria per\n"
-"arrencar el GNU/Linux.\n"
-"\n"
-"\n"
-"Tret que sabeu exactament qu� esteu fent, escolliu \"Primer sector\n"
-"de la unitat (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"El DrakX intentar� trobar el(s) adaptador(s) SCSI PCI. \n"
-"Si en troba, i sap quin programa de control utilitzar, el(s)\n"
-"instal�lar� autom�ticament.\n"
-"\n"
-"\n"
-"Si no teniu cap adaptador SCSI, un adaptador SCSI ISA, o un\n"
-"adaptador SCSI PCI que el DrakX no reconegui, se us demanar� si teniu\n"
-"un adaptador SCSI al sistema. Si no en teniu cap, simplement feu clic a \"No"
-"\". Si feu\n"
-"clic a \"S�\", apareixer� una llista de programes de control on podreu\n"
-"seleccionar l'adaptador concret.\n"
-"\n"
-"\n"
-"Si heu hagut de seleccionar l'adaptador manualment, el DrakX us preguntar�\n"
-"si voleu indicar opcions per a ell. Conv� que deixeu que el DrakX comprovi\n"
-"el maquinari per a les opcions; aix� sol funcionar b�.\n"
-"\n"
-"\n"
-"Si no, us caldr� proporcionar les opcions al programa de control. Consulteu\n"
-"el cap�tol 3 de la Guia de l'usuari, secci� \"Informaci� obtinguda del\n"
-"maquinari\" per saber com treure aquesta informaci� de la documentaci� del\n"
-"maquinari, del lloc web del fabricant (si teniu acc�s a Internet) o del\n"
-"Microsoft Windows (si el teniu al sistema)."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Podeu afegir entrades addicionals per al yaboot, ja sigui per a altres\n"
-"sistemes operatius, nuclis alternatius, o per a una imatge per a arrencades\n"
-"d'emerg�ncia.\n"
-"\n"
-"\n"
-"Per a altres OS, l'entrada nom�s consta d'una etiqueta i de la partici� "
-"arrel.\n"
-"\n"
-"\n"
-"Per al Linux, hi ha algunes opcions possibles: \n"
-"\n"
-"\n"
-"  - Label: �s nom�s el nom a indicar a l'indicador del yaboot per\n"
-"seleccionar aquesta opci� d'arrencada.\n"
-"\n"
-"\n"
-"  - Image: el nom del nucli a arrencar. Normalment, vmlinux o una\n"
-"variaci� de vmlinux amb una extensi�.\n"
-"\n"
-"\n"
-"  - Rool: el dispositiu arrel o '/' per a la instal�laci� del Linux.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: en maquinari Apple, l'opci� d'addici� de nuclis s'utilitza\n"
-"for�a sovint per auxiliar en la inicialitzaci� de maquinari de v�deo o per\n"
-"habilitar l'emulaci� del bot� del ratol� de teclat per als 2n i 3r botons,\n"
-"que sovint no existeixen, d'un ratol� Apple convencional. Alguns exemples\n"
-"d'aix� s�n:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: aquesta opci� es pot utilitzar per carregar els m�duls "
-"inicials,\n"
-"abans que el dispostiu d'arrencada estigui disponible, o per tornar a "
-"carregar\n"
-"una imatge de disc RAM en una situaci� d'arrencada d'emerg�ncia.\n"
-"\n"
-"\n"
-"  - Initrd-size: la mida per defecte del disc RAM sol ser de 4.096 bytes. Si "
-"necessiteu assignar un disc RAM gran, podeu utilitzar aquesta opci�.\n"
-"\n"
-"\n"
-"  - Read-write: normalment, la partici� 'root' es tracta inicialment com "
-"nom�s de lectura per permetre una comprovaci� del sistema de fitxers abans "
-"que el sistema esdevingui 'viu'; podeu substituir aquesta opci� aqu�.\n"
-"\n"
-"\n"
-"  - NoVideo: en cas que el maquinari de v�deo de Apple resulti sigui\n"
-"especialment problem�tic, podeu seleccionar aquesta opci� per arrencar\n"
-"en mode 'no-v�deo', amb el suport nadiu per a mem�ria interm�dia de marcs.\n"
-"\n"
-"\n"
-"  - Default: selecciona aquesta entrada com a selecci� per defecte del\n"
-"Linux; se selecciona prement simplement Retorn a l'indicador del yaboot.\n"
-"Aquesta opci� tamb� es ressaltar� amb un '*' si premeu Tab per veure les\n"
-"seleccions d'arrencada."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"El Yaboot �s un carregador d'arrencada per a maquinari NewWorld MacIntosh.\n"
-"Pot arrencar tant el GNU/Linux com el MacOS o el MacOSX, si �s que els "
-"teniu\n"
-"a l'ordinador. Normalment, aquests altres sistemes operatius es detecten i\n"
-"instal�len correctament; si no �s aix�, per�, en aquesta pantalla podeu\n"
-"afegir una entrada manualment. Aneu amb compte de triar els par�metres\n"
-"correctes.\n"
-"\n"
-"\n"
-"Les opcions principals del Yaboot s�n:\n"
-"\n"
-"\n"
-"  - Missatge d'inicialitzaci�: un senzill missatge de text que apareix "
-"abans\n"
-"de l'indicador d'arrencada.\n"
-"\n"
-"\n"
-"  - Dispositiu d'arrencada: indica on voleu situar la informaci� necess�ria\n"
-"per arrencar el GNU/Linux. Normalment, haureu configurat abans una partici�\n"
-"bootstrap que contindr� aquesta informaci�.\n"
-"\n"
-"\n"
-"  - Demora de l'Open Firmware: a difer�ncia del LILO, amb el Yaboot hi ha\n"
-"dues demores disponibles. La primera d'elles es mesura en segons i, en "
-"aquest\n"
-"punt, podeu triar entre CD, arrencada OF, MacOS o Linux.\n"
-"\n"
-"\n"
-"  - Temps m�xim d'arrencada del nucli: aquest temps m�xim �s similar a la "
-"demora d'arrencada del LILO. Despr�s de seleccionar el Linux tindreu aquesta "
-"demora en 0,1 segons abans que se seleccioni la descripci� per defecte del "
-"nucli.\n"
-"\n"
-"\n"
-"  - Habilitar l'arrencada des de CD?: si activeu aquesta opci� podreu triar\n"
-"'C' per a CD al primer indicador de l'arrencada.\n"
-"\n"
-"\n"
-"  - Habilitar l'arrencada OF?: si activeu aquesta opci� podreu triar 'N' "
-"per\n"
-"Open Firmware al primer indicador de l'arrencada.\n"
-"\n"
-"\n"
-"  - OS per defecte: podeu seleccionar amb quin OS, per defecte, s'arrencar�\n"
-"quan la demora de l'Open Firmware venci."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Escolliu el disc dur que voleu buidar per instal�lar la nova partici� "
-"Linux-\n"
-"Mandrake. Aneu amb compte, se'n perdran totes les dades i no es podran "
-"recuperar."
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Feu clic a \"D'acord\" si voleu suprimir totes les dades i\n"
-"particions que hi ha en aquesta unitat de disc. Aneu amb compte, perqu�, un "
-"cop hagueu fet clic a \"D'acord\", no podreu recuperar cap dada ni partici� "
-"del disc,\n"
-"incloent las dades de Windows.\n"
-"\n"
-"\n"
-"Feu clic a \"Cancel�la\" per anul�lar aquesta operaci� sense perdre cap "
-"dada\n"
-"ni partici� d'aquest disc."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "No es pot utilitzar l'emissi� sense un domini NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inseriu un disquet formatat amb FAT a la unitat %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Aquest disquet no est� formatat en FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Per utilitzar aquesta selecci� de paquets desada, arrenqueu la instal�laci� "
-"amb ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "S'ha produ�t un error en llegir el fitxer %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Part del maquinari del vostre ordinador necessita programes de control\n"
-"``registrats'' per poder funcionar. En podeu trobar informaci� a: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Heu de tenir una partici� arrel.\n"
-"Per fer-ho, creeu una partici� (o feu clic a una d'existent).\n"
-"Despr�s, trieu l'acci� ``Punt de muntatge'' i doneu-li el valor '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Heu de tenir una partici� d'intercanvi"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"No teniu cap partici� d'intercanvi\n"
-"\n"
-"Voleu continuar igualment?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Heu de tenir una partici� d'intercanvi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Utilitza l'espai lliure"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "No hi ha prou espai lliure per assignar noves particions"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Utilitza la partici� existent"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "No existeix cap partici� per utilitzar"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Utilitza la particio Windows per al loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Quina partici� voleu utilitzar per al Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Escolliu les mides"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Mida de la partici� arrel en MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Mida de la partici� d'intercanvi en MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Utilitza l'espai lliure de la partici� de Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "A quina partici� voleu canviar la mida?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "S'estan calculant els l�mits del sistema de fitxers de Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"El redimensionador de la FAT no pot gestionar la vostra partici�, \n"
-"s'ha produ�t l'error seg�ent: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"La partici� de Windows est� massa fragmentada; si us plau, executeu "
-"``defrag'' primer"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATENCI�!\n"
-"\n"
-"Ara, el DrakX canviar� la mida de la vostra partici� de Windows. Aneu amb\n"
-"compte: aquesta operaci� �s perillosa. Si encara no ho heu fet, sortiu de "
-"la\n"
-"instal�laci�, executeu l'Scandisk sota Windows (i potser tamb� el Defrag), "
-"i\n"
-"torneu a comen�ar la instal�laci�. Feu tamb� una c�pia de seguretat de les\n"
-"vostres dades.\n"
-"Quan estigueu segur, premeu D'acord."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Quina mida voleu deixar per a la partici� de Windows?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partici� %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Ha fallat la redimensi� de la FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"No hi ha particions FAT a qu� canviar la mida o per utilitzar-les com a "
-"loopback (o no queda prou espai)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Esborra el disc complet"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Elimina el Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Teniu m�s d'un disc dur; en quin voleu instal�lar el Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Es perdran TOTES les particions, i les dades que contenen, de la unitat %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Particionament personalitzat de disc"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Utilitza l'fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Ara podeu fer les particions a %s.\n"
-"Quan acabeu, no oblideu desar-les utiltzant `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "No teniu prou espai lliure a la partici� de Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "No puc trobar espai per a la instal�laci�"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"L'assistent de particionament del DrakX ha trobat les solucions seg�ents:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ha fallat el particionament: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "S'est� activant la xarxa"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "S'est� desactivant la xarxa"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"S'ha produ�t un error, per� no s� com gestionar-lo correctament.\n"
-"Si continueu, �s sota la vostra responsabilitat."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplica el punt de muntatge %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Alguns paquets importants no s'han instal�lat correctament.\n"
-"La vostra unitat de CD-ROM, o b� el CD-ROM, s�n defectuosos.\n"
-"Comproveu el CD-ROM en un ordinador instal�lat mitjan�ant \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Benvingut a %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "No hi ha cap unitat de disquet disponible"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "S'est� introduint el pas `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"El vostre sistema est� baix de recursos; podeu tenir algun problema en\n"
-"instal�lar el Mandrake Linux. Si aix� passa, podeu provar d'instal�lar-lo "
-"en\n"
-"mode text. Per fer-ho, premeu `F1' en arrencar des del CD-ROM i escriviu "
-"`text'"
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Tipus d'instal�laci�"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Si us plau, trieu un dels tipus d'instal�laci� seg�ents:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"La mida total dels grups que heu seleccionat es d'aproximadament %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Si no voleu instal�lar tants MB, seleccioneu el percentatge de paquets\n"
-"que voleu instal�lar.\n"
-"\n"
-"Un percentatge baix instal�lar� nom�s els paquets m�s importants;\n"
-"un percentatge del 100%% instal�lar� tots els paquets seleccionats."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Nom�s teniu prou espai al disc per a %d%% d'aquests paquets.\n"
-"\n"
-"Si en voleu instal�lar menys, seleccioneu el percentatge de paquets\n"
-"que voleu instal�lar.\n"
-"Un percentatge baix instal�lar� nom�s els paquets m�s importants;\n"
-"un percentatge del %d%% instal�lar� tants paquets com sigui possible."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Podreu fer una elecci� m�s concreta al pas seg�ent"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentatge de paquets per instal�lar"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Selecci� del grup de paquets"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Selecci� individual de paquets"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Mida total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Paquet incorrecte"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nom: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versi�: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Mida: %d kB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Import�ncia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"No podeu seleccionar aquest paquet perqu� no queda prou espai per instal�lar-"
-"lo"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Ara s'instal�laran els paquets seg�ents"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Ara s'eliminaran els paquets seg�ents"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "No podeu seleccionar/desseleccionar aquest paquet"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Aquest paquet �s obligatori; no es pot deseleccionar"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "No podeu desseleccionar aquest paquet; ja est� instal�lat"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Aquest paquet s'ha d'actualitzar\n"
-"Esteu segur que voleu desseleccionar-lo?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "No podeu desseleccionar aquest paquet; s'ha d'actualitzar"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Mostra autom�ticament els paquets seleccionats"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instal�la"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Desa al disquet"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Desa la selecci� de paquets"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Desinstal�la"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Escolliu els paquets que voleu instal�lar"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "S'est� instal�lant"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "S'est� estimant"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Temps restant "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Si us plau, espereu, s'est� preparant la instal�laci�"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paquets"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "S'est� instal�lant el paquet %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Accepta"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Rebutja"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Canvieu el vostre CD-ROM!\n"
-"\n"
-"Si us plau, inseriu el CD-ROM etiquetat com \"%s\" a la unitat i despr�s\n"
-"premeu D'acord.\n"
-"Si no el teniu, premeu Cancel�la per no fer la instal�laci� des d'aquest CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Voleu seguir igualment?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "S'ha produ�t un error en ordenar els paquets"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "S'ha produ�t un error en instal�lar els paquets"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Si us plau, llegiu atentament les cl�usules seg�ents. Si no esteu\n"
-"d'acord amb qualsevol d'elles, no esteu autoritzat a instal�lar\n"
-"els CD seg�ents. Premeu 'Rebutja-ho' per continuar la instal�laci�\n"
-"sense utilitzar aquests CD.\n"
-"\n"
-"\n"
-"Alguns dels components que s'inclouen en aquest CD no estan\n"
-"regits per la llic�ncia GPL o acords semblants. Cada un d'aquests\n"
-"components es regeix per les cl�usules i condicions de la seva\n"
-"pr�pia llic�ncia espec�fica. Si us plau, llegiu atentament i\n"
-"accepteu aquestes llic�ncies espec�fiques abans d'utilitzar o\n"
-"redistribuir els components esmentats. En general, aquestes\n"
-"llic�ncies impedeixen la transfer�ncia, duplicaci� (excepte amb\n"
-"la finalitat de fer-ne c�pies de seguretat), redistribuci�,\n"
-"enginyeria inversa, deassemblatge, decompilaci� o modificaci� del\n"
-"component. Qualsevol violaci� de l'acord finalitzar� immediatament\n"
-"els vostres drets sobre la llic�ncia espec�fica. Tret que la\n"
-"llic�ncia espec�fica us en garanteixi els drets, normalment no\n"
-"podreu instal�lar els programes en m�s d'un sistema, ni adaptar-lo\n"
-"per utilitzar-lo en una xarxa. En cas de dubte, poseu-vos en\n"
-"contacte directament amb el distribu�dor o editor del component.\n"
-"La transfer�ncia a terceres parts i la c�pia d'aquests components,\n"
-"incloent la documentaci�, estan normalments prohibides.\n"
-"\n"
-"\n"
-"Tots els drets sobre els components del CD seg�ent pretanyen als\n"
-"seus autors respectius i estan protegits per les lleis de\n"
-"propietat intel�lectual i de copyright aplicables als programes\n"
-"inform�tics.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "S'ha produ�t un error"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Voleu reiniciar la xarxa"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Acord de llic�ncia"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introducci�\n"
-"\n"
-"D'ara endavant, hom es referir� al sistema operatiu i als diferents\n"
-"components disponibles en la distribuci� Mandrake Linux com als\n"
-"\"Productes de programari\". Els Productes de programari inclouen,\n"
-"per� no estan restringits a, el conjunt de programes, m�todes, regles\n"
-"i documentaci� relativa al sistema operatiu i els diferents\n"
-"components de la distribuci� Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Acord de llic�ncia\n"
-"\n"
-"Si us plau, llegiu atentament aquest document. Aquest document �s un\n"
-"acord de llic�ncia entre la vostra persona i MandrakeSoft S.A., que\n"
-"s'aplica als Productes de programari. Pel fet d'instal�lar, duplicar\n"
-"o utilitzar els Productes de programari en qualsevol forma esteu\n"
-"acceptant expl�citament, i expressant el vostre acord a, avenir-vos a\n"
-"les cl�usules i condicions d'aquesta Llic�ncia. Si no esteu d'acord\n"
-"amb qualsevol part de la Llic�ncia, no esteu autoritzat a instal�lar,\n"
-"duplicar o utilitzar els Productes de programari. Qualsevol intent\n"
-"d'instal�lar, duplicar o utilitzar els Productes de programari en una\n"
-"forma que no s'adapti a les cl�usules i condicions d'aquesta\n"
-"Llic�ncia, �s nul i finalitzar� els vostres drets sobre la mateixa.\n"
-"En finalitzar-se la Llic�ncia, heu de destruir immediatament totes\n"
-"les c�pies dels Productes de programari.\n"
-"\n"
-"\n"
-"2. Garantia limitada\n"
-"\n"
-"Els Productes de programari i documentaci� adjunta es subministren\n"
-"\"tal com s�n\", sense cap garantia, fins al punt perm�s per la llei.\n"
-"MandrakeSoft S.A. no ser�, sota cap circumst�ncia, i fins al punt\n"
-"perm�s per la llei, responsable de cap dany especial, incidental ni\n"
-"directe (incloent, sense limitar-se a, els danys per p�rdua de\n"
-"negocis, interrupci� de negocis, p�rdues financeres, multes i costes\n"
-"judicials, o qualsevol altre dany que resultin d'un judici, o\n"
-"qualsevol altre p�rdua d'import�ncia) que resulti de l'�s o de la\n"
-"impossibilitat d'utilitzar els Productes de programari, fins i tot si\n"
-"MandrakeSoft S.A. ha estat avisat de la possibilitat que\n"
-"s'esdevinguin aquests danys.\n"
-"\n"
-"RESPONSABILITAT LIMITADA RELATIVA A LA POSSESSI� O UTILITZACI� DE PROGRAMARI "
-"PROHIBIT EN ALGUNS PA�SOS\n"
-"\n"
-"Fins al punt perm�s per la llei, MandrakeSoft S.A. o els seus\n"
-"distribu�dors no seran, sota cap circumst�ncia, responsables de cap\n"
-"dany especial, incidental ni directe (incloent, sense limitar-se a,\n"
-"els danys per p�rdua de negocis, interrupci� de negocis, p�rdues\n"
-"financeres, multes i costes judicials, o qualsevol altre dany que\n"
-"resultin d'un judici, o qualsevol altre p�rdua d'import�ncia) que\n"
-"resulti de la possessi� i utilitzaci� dels components de programari o\n"
-"de la seva desc�rrega des d'un dels llocs de Mandrake Linux, que\n"
-"estiguin prohibides o restringides en alguns pa�sos per les lleis\n"
-"locals. Aquesta responsabilitat limitada s'aplica, per� no est�\n"
-"limitada a, els potents components criptogr�fics inclosos als\n"
-"Productes de programari.\n"
-"\n"
-"\n"
-"3. la llic�ncia GPL i llic�ncies relacionades\n"
-"\n"
-"Els Productes de programari consisteixen en components creats per\n"
-"diferents persones o entitats. La majoria d'aquests components es\n"
-"regeixen per les cl�usules i condicions de la Llic�ncia General\n"
-"P�blica de GNU, a la qual d'ara endavant hom s'hi referir� com a\n"
-"\"GPL\", o de llic�ncies similars. la majoria d'aquestes llic�ncies\n"
-"us permeten duplicar, adaptar o redistribuir els components que\n"
-"cobreixen. Si us plau, llegiu atentament les cl�usules i condicions\n"
-"de l'acord de llic�ncia de cada component abans d'utilitzar-lo.\n"
-"Qualsevol pregunta sobre la lllic�ncia d'un component s'ha d'adre�ar\n"
-"al seu autor i no a MandrakeSoft.\n"
-"Els programes desenvolupats per MandrakeSoft S.A. es regeixen per la\n"
-"llic�ncia GPL.La documentaci� escrita per MandrakeSoft S.A. est� regida per "
-"una\n"
-"llic�ncia espec�fica; consulteu la documentaci� per a m�s\n"
-"informaci�.\n"
-"\n"
-"\n"
-"4. Drets sobre la propietat intel�lectual\n"
-"\n"
-"Tots els drets sobre els components dels Productes de programari\n"
-"pertanyen als seus autors respectius i estan protegits per les lleis\n"
-"de propietat intel�lectual i de copyright aplicables als programes\n"
-"inform�tics.\n"
-"MandrakeSoft S.A. es reserva els drets de modificar o adaptar els\n"
-"Productes de programari, totalment o parcialment, per tots els\n"
-"mitjans i amb totes les finalitats.\n"
-"\"Mandrake\", \"Mandrake Linux\" i els logotips associats son marques\n"
-"registrades de MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Lleis rectores \n"
-"\n"
-"Si qualsevol part d'aquest acord �s declarat nul, il�legal o\n"
-"inaplicable per un tribunal, aquesta part s'exclour� del contracte.\n"
-"Seguiu obligat, per�, per les altres seccions aplicables de\n"
-"l'acord.\n"
-"Les cl�usules i condicions d'aquesta Llic�ncia es regeixen per les\n"
-"lleis de Fran�a.\n"
-"Tots els litigis sobre les cl�usules d'aquesta llic�ncia es dirimiran\n"
-"preferiblement fora dels tribunals. Com a �ltim recurs, el litigi es\n"
-"portar� als tribunals competents de Par�s, Fran�a.\n"
-"Per a qualsevol tema relacionat amb aquest document, poseu-vos en\n"
-"contacte amb MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclat"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Si us plau, selecioneu la disposici� del vostre teclat."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Aquesta �s la llista completa de teclats disponibles"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Quin tipus d'instal�laci� voleu?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instal�la/Actualitza"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Es tracta d'una instal�laci� o d'una actualitzaci�?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recomanada"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Actualitza"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Desa la selecci� de paquets"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Si us plau, seleccioneu el vostre tipus de ratol�."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port del ratol�"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-"Si us plau, seleccioneu el port s�rie a qu� est� connectat el vostre ratol�."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulaci� dels botons"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulaci� del bot� 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulaci� del bot� 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "S'estan configurant les targetes PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "S'est� configurant l'IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "no hi ha particions disponibles"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "S'estan explorant les particions per trobar els punts de muntatge"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Escolliu els punts de muntatge"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"No puc llegir la vostra taula de particions, est� massa malmesa per a mi :(\n"
-"Intentar� seguir, buidant les particions incorrectes (es perdran TOTES LES "
-"DADES!).\n"
-"L'altra soluci� �s impedir al DrakX que modifiqui la taula de particions.\n"
-"(l'error �s %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"El DiskDrake no ha pogut llegir correctament la taula de particions.\n"
-"Si continueu, �s sota la vostra responsabilitat!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "No s'ha trobat cap partici� arrel"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partici� arrel"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Quina �s la partici� arrel (/) del vostre sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Us caldr� tornar a arrencar per tal que les modificacions de la taula de "
-"particions tinguin efecte"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Escolliu les particions que voleu formatar"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Voleu comprovar els blocs incorrectes?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "S'estan formatant les particions"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "S'est� creant i formatant el fitxer %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"No hi ha prou intercanvi per completar la instal�laci�; si us plau, afegiu-ne"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "S'estan cercant els paquets disponibles"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "S'estan cercant els paquets a actualitzar"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Al vostre sistema no li queda prou espai per a la instal�laci� o "
-"actualitzaci� (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "M�nima (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomanada (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaura des del disquet"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaura des del disquet"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Selecci� del grup de paquets"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Inseriu un disquet a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Desa al disquet"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Escolliu el paquet a instal�lar"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Espera"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si teniu tots els CD de la llista inferior, feu clic a D'acord.\n"
-"Si no teniu cap d'aquests CD, feu clic a Cancel�la.\n"
-"Si nom�s falten alguns CD, desseleccioneu-los i feu clic a D'acord."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM etiquetat com \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "S'est� preparant la instal�laci�"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"S'est� instal�lant el paquet %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Publica la configuraci� de la instal�laci� "
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Inseriu un disquet a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Inseriu un disquet en blanc a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Ara teniu la possibilitat de descarregar programari destinat al xifratge.\n"
-"\n"
-"AV�S:\n"
-"Degut a diversos requeriments generals aplicables a aquest programari, i\n"
-"imposats per diverses jurisdiccions, el client i/o l'usuari final d'aquest\n"
-"programari s'ha(n) d'assegurar que les lleis de la(es) seva(es)\n"
-"jurisdicci�(ns) li(els) permeten descarregar-lo, emmagatzemar-lo i/o\n"
-"utilitzar-lo.\n"
-"\n"
-"A mes, el client i/o l'usuari final ha(n) de tenir especialment en compte\n"
-"que no ha(n) d'infrigir les lleis de la(es) seva(es) jurisdicci�(ns). Si\n"
-"el client i/o l'usuari final no respecta(en) les disposicions d'aquestes\n"
-"lleis, pot(den) ser severament sancionat(s).\n"
-"\n"
-"Mandrakesoft i els seus fabricants i/o prove�dors no seran en cap cas\n"
-"responsables de cap dany especial, indirecte o incidental (incloent,\n"
-"per� sense limitar-se a, la p�rdua de beneficis, interrupci� del negoci,\n"
-"p�rdua de dades comercials i altres p�rdues econ�miques, i eventuals\n"
-"responsabilitats i idemnitzacions que s'hagin de pagar per sent�ncia\n"
-"judicial) derivat de l'�s, la possessi� o la simple desc�rrega d'aquest\n"
-"programari, al qual el client i/o l'usuari final pugui(n), eventualment,\n"
-"tenir acc�s despr�s d'haver signat el present acord.\n"
-"\n"
-"Per a qualsevol consulta relativa a aquest acord, podeu adre�ar-vos a \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"S'est� contactant amb el mirror per obtenir la llista dels paquets "
-"disponibles"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escolliu un mirror al qual aconseguir els paquets"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"S'est� contactant amb el mirror per obtenir la llista dels paquets "
-"disponibles"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "En quina zona hor�ria us trobeu?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "El rellotge del vostre ordinador est� regulat a GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remot"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Cap impressora"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "En teniu una altra?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Resum"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Ratol�"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Zona hor�ria"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Impressora"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Targeta XDSI"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Targeta de so"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Targeta de TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Utilitza el NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Impressora local"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Contrasenya de 'root'"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Sense contrasenya"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Aquesta contrasenya �s massa senzilla (ha de tenir com a m�nim %d car�cters)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autenticaci�"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autenticaci�"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Servidor"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "NIS d'autenticaci�"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Domini del NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
-"vostre\n"
-"sistema Linux sense dependre del carregador d'arrencada normal. Aix� �s "
-"�til\n"
-"si no voleu instal�lar el SILO al sistema, o si un altre sistema operatiu\n"
-"elimina el SILO, o si el SILO no funciona amb la vostra configuraci� de\n"
-"maquinari. Un disc d'arrencada personalitzat tamb� es pot utilitzar amb la\n"
-"imatge de rescat del Mandrake, facilitant molt la recuperaci� de fallides\n"
-"serioses del sistema.\n"
-"\n"
-"Si voleu crear un disc d'arrencada per al vostre sistema, inseriu un disquet "
-"a la primera unitat i premeu \"D'acord\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primera unitat de disquet"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Segona unitat de disquet"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Omet"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
-"vostre\n"
-"sistema Linux sense dependre del carregador d'arrencada normal. Aix� �s "
-"�til\n"
-"si no voleu instal�lar el LILO (o el grub) al sistema, o si un altre sistema "
-"operatiu\n"
-"elimina el LILO, o si el LILO no funciona amb la vostra configuraci� de\n"
-"maquinari. Un disc d'arrencada personalitzat tamb� es pot utilitzar amb la\n"
-"imatge de rescat del Mandrake, facilitant molt la recuperaci� de fallides\n"
-"serioses del sistema. Voleu crear un disc d'arrencada per al vostre "
-"sistema?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "No hi ha cap unitat de disquet disponible"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Escolliu la unitat de disquet que voleu utilitzar per crear el disc "
-"d'arrencada"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Inseriu un disquet a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "S'est� creant el disc d'arrencada"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "S'est� preparant el carregador d'arrencada"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Voleu utilitzar l'aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"S'ha produ�t un error en instal�lar l'aboot; \n"
-"voleu intentar igualment la instal�laci� encara que aix� destrueixi la "
-"primera partici�?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instal�la el LILO"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Ha fallat la instal�laci� del carregador d'arrencada. S'ha produ�t l'error "
-"seg�ent:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Potser us caldr� canviar el dispositiu d'arrencada Open Firware per\n"
-" habilitar el carregador d'arencada. Si no veieu l'indicador del\n"
-" carregador d'arrencada en tornar a arrencar, premeu Command-Option-O-F\n"
-" en tornar a arrencar i introdu�u:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Despr�s, escriviu: shut-down\n"
-"En l'arrencada seg�ent heu de veure l'indicador del carregador d'arrencada."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inseriu un disquet en blanc a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "S'est� creant el diquet d'instal�laci� autom�tica"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Alguns passos no s'han completat.\n"
-"\n"
-"Segur que voleu sortir ara?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicitats! La instal�laci� ha acabat.\n"
-"Traieu el suport d'arrencada i premeu Intro per tornar a arrencar.\n"
-"\n"
-"\n"
-"Trobareu la soluci� als problemes coneguts d'aquesta versi� del\n"
-"Mandrake Linux a la fe d'errates que hi ha a \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"La informaci� sobre com configurar el vostre sistema est� disponible a\n"
-"l'�ltim cap�tol d'instal�laci� de la Guia Oficial de l'Usuari del\n"
-"Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Genera un disquet per a la instal�laci� autom�tica"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Si es desitja, la instal�laci� autom�tica es pot\n"
-"automatitzar completament, per� en aquest cas\n"
-"prendr� el control del disc dur!!\n"
-"(aix� est� pensat per a la instal�laci� en una altra caixa).\n"
-"\n"
-"Potser preferireu repetir la instal�laci�.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Autom�tica"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Repeteix"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Desa la selecci� de paquets"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instal�laci� del Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> entre elements  | <Espai> selecciona | <F12> pant. seg�ent"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "El kdesu no hi �s"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Trieu una acci�"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avan�at"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Si us plau, espereu"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informaci�"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expandeix l'arbre"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Redueix l'arbre"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Commuta entre pla i ordenat per grups"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Elecci� incorrecta, torneu-ho a intentar\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "La vostra elecci�? (predeterminat %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "La vostra elecci�? (predeterminat %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opcions: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Voleu utilitzar l'aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "La vostra elecci�? (predeterminat %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Txec (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Alemany"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Espanyol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Fin�s"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Franc�s"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Noruec"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polon�s"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rus"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Suec"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Teclat RU"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Teclat EU"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Irani�"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armeni (antic)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armeni (m�quina d'escriure)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armeni (fon�tic)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjan�s (llat�)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armeni (fon�tic)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "B�lgar"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiler (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielor�s"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Su�s (disposici� alemanya)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Su�s (disposici� francesa)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Txec (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Alemany (sense tecles inoperatives)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dan�s"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (EU)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruec)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (EU)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estoni�"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgi� (disposici� \"russa\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgi� (disposici� \"llatina\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grec"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hongar�s"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israeli�"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israeli� (fon�tic)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Irani�"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Island�s"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Itali�"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japon�s de 106 tecles"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Teclat core�"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Espanyol sud-americ�"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litu� AZERTY (antic)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litu� AZERTY (nou)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litu� \"fila de n�meros\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litu� \"fon�tic\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Ubicaci�"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedoni"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holand�s"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polon�s (disposici� qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polon�s (disposici� qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugu�s"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadenc (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rus (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rus (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rus (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Eslov�"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovac (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovac (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidjan�s (cir�l�lic)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Taula"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Teclat tai"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Teclat tai"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turc (tradicional, model \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turc (modern, model \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucra�n�s"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Teclat EU (internacional)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"fila num�rica\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslau (llat�/cir�l�lic)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Muntatges circulars %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Elimineu primer els volums l�gics\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Rat� de bola PS2 gen�ric"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 bot�"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generic 2 Button Mouse"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "General"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "De bola"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "s�rie"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generic 3 Button Mouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (s�rie, tipus C7 antic)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 botons"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botons"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "cap"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Cap ratol�"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Si us plau, comproveu el ratol�."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Per activar el ratol�,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVEU LA BOLA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Fin�s"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Seg�ent ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Aix� �s correcte?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Connecta't a internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La manera m�s habitual de connectar amb ADSL �s pppoe.\n"
-"Algunes connexions utilitzen pptp, unes poques utilitzen dhcp.\n"
-"Si no ho sabeu, escolliu 'utilitza pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "utilitza dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "utilitza pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "utilitza pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Quin client dhcp voleu utilitzar?\n"
-"El predeterminat �s dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"No s'ha detectat cap adaptador de xarxa ethernet al sistema.\n"
-"No puc configurar aquest tipus de connexi�."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Escolliu la interf�cie de xarxa"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Si us plau, seleccioneu quin adaptador de xarxa voleu utilitzar per\n"
-"connectar-vos a Internet."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "no s'ha trobat cap targeta de xarxa"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "S'est� configurant la xarxa"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Si us plau, introdu�u el nom del vostre ordinador central, si el sabeu.\n"
-"Alguns servidors DHCP necessiten que aquest nom funcioni.\n"
-"El nom ha de ser complet,\n"
-"com ara ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nom de l'ordinador central"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Assistent de configuraci� de xarxa"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "M�dem XDSI extern"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Targeta XDSI interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Quin tipus de connexi� XDSI teniu?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "S'ha detectat la configuraci� del sistema de tallafocs!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "S'ha detectat la configuraci� del sistema de tallafocs!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configuraci� de l'XDSI"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Seleccioneu el vostre prove�dor.\n"
-" Si no �s a la llista, seleccioneu No �s a la llista"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protocol d'arrencada"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Resta del m�n"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Resta del m�n \n"
-" cap canal D (l�nies llogades)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Quin protocol voleu utilitzar?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Quin tipus de targeta teniu?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "No s�"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Si teniu una targeta ISA, els valors de la pantalla seg�ent han de ser "
-"correctes.\n"
-"\n"
-"Si teniu una targeta PCMCIA, us en cal saber l'irq i l'io.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Interromp"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continua"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Quina targeta XDSI teniu ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"He detectat una targeta PCI XDSI, per� no en conec el tipus. Si us plau, "
-"seleccioneu una targeta PCI a la pantalla seg�ent."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"No s'ha trobat cap targeta PCI XDSI. Si us plau, seleccioneu-ne una a la "
-"pantalla seg�ent"
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-"Si us plau, seleccioneu el port s�rie al qual teniu connectat el m�dem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opcions de marcatge"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nom de la connexi�"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "N�mero de tel�fon"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID d'entrada"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Basat en script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Basat en terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nom de domini"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primer servidor DNS (opcional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Segon servidor DNS (opcional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Podeu desconnectar-vos o tornar a configurar la connexi�."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Podeu tornar a configurar la connexi�."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Ara mateix esteu connectat a Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Podeu connectar-vos a Internet o tornar a configurar la connexi�."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Ara mateix no esteu connectat a Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Connecta"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Desconnecta"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Configura una connexi� per cable"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Connexi� i configuraci� d'Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Podeu desconnectar-vos o tornar a configurar la connexi�."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Podeu desconnectar-vos o tornar a configurar la connexi�."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configuraci� de xarxa"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"At�s que esteu realitzant una instal�laci� de xarxa, ja teniu la xarxa "
-"configurada.\n"
-"Feu clic a D'acord per conservar la configuraci�, o a Cancel�la per tornar a "
-"configurar la connexi� a Internet i xarxa.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Benvingut a l'Auxiliar de configuraci� a xarxa\n"
-"\n"
-"Ara configurarem la connexi� a Internet/xarxa.\n"
-"Si no voleu utilitzar la detecci� autom�tica, desactiveu el quadre de "
-"verificaci�.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Escolliu el perfil per configurar"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Utilitza la detecci� autom�tica"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "S'estan detectant els dispositius..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Connexi� normal per m�dem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detectat al port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Connexi� XDSI"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "s'ha detectat %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Connexi� LAN"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectat a la interf�cie %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Connexi� de cable"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Connexi� de cable"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Connexi� LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "s'han detectat una o diverses targetes Ethernet"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Escolliu l'eina que voleu utilitzar "
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Connexi� a Internet compartida"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Voleu iniciar la connexi� en arrencar?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configuraci� de xarxa"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"S'ha produ�t un problema en reiniciar la xarxa: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Felicitats, la configuraci� de xarxa i Internet ha finalitzat.\n"
-"\n"
-"Ara s'aplicar� la configuraci� al sistema.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Despr�s d'aix�, �s recomanable que reinicieu l'entorn X per\n"
-"evitar problemes deguts al canvi de nom de l'ordinador central."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ATENCI�: Aquest dispositiu ja es va configurar per connectar-se a Internet.\n"
-"Nom�s cal que accepteu mantenir-lo configurat.\n"
-"Si modifiqueu els camps inferiors, sobreescriureu aquesta configuraci�."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Si us plau, introdu�u la configuraci� IP d'aquest ordinador.\n"
-"S'ha d'introduir cada element com a una adre�a IP amb notaci� decimal amb\n"
-"punts (per exemple, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "S'est� configurant el dispositiu de xarxa %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (programa de control %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Adre�a IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Subm�scara de la xarxa"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP autom�tic"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L'adre�a IP ha d'estar amb el format 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Si us plau, introdu�u el nom del vostre ordinador central.\n"
-"Aquest nom ha de ser complet, com ara\n"
-"``mybox.mylab.myco.com''.\n"
-"Tamb� podeu introduir l'adre�a IP de la passarel�la, si en teniu una"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "servidor DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dispositiu de la passarel�la"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configuraci� dels proxys"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "El proxy ha de ser http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "El proxy ha de ser ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configuraci� d'Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Voleu intentar connectar-vos a Internet ara?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "S'est� comprovant la vostra conexi�..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Ara, el sistema est� connectat a Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Per raons de seguretat, ara es desconnectar�."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"No sembla que el sistema estigui connectat a Internet.\n"
-"Intenteu tornar a configurar la connexi�."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configuraci� de la connexi�"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Si us plau, ompliu o marqueu el camp inferior"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Targeta IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Targeta de mem�ria (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Targeta d'E/S"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Targeta d'E/S_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Targeta d'E/S_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "El vostre tel�fon particular"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nom del prove�dor (p.ex. proveidor.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "N�mero de tel�fon del prove�dor"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 del prove�dor (opcional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 del prove�dor (opcional)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Escolliu el vostre teclat"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Mode de marcatge"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Tipus de connexi�: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tipus de connexi�: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Entrada del compte (nom d'usuari)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Contrasenya del compte"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "ha fallat el muntatge: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Aquesta plataforma no suporta particions esteses"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Hi ha un forat a la vostra taula de particions, per� no puc utilitzar-lo.\n"
-"L'�nica soluci� �s moure les particions prim�ries per fer que el forat quedi "
-"contigu a les particions ampliades"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Ha fallat la restauraci� del fitxer %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Fitxer de c�pia de seguretat incorrecte"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "S'ha produ�t un error en escriure al fitxer %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Alguna cosa no va b� en la vostra unitat. \n"
-"Ha fallat una comprovaci� de la integritat de les dades. \n"
-"Aix� vol dir que qualsevol cosa que s'escrigui al disc acabar� feta malb�"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ha de tenir"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "important"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "molt bonic"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bonic"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "potser"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Servidor CUPS remot"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Servidor lpd remot"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Impressora de xarxa (TCP/s�col)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servidor de la impressora"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Dispositiu URI d'impressora"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "S'ha produ�t un error en escriure al fitxer %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(m�dul %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP del servidor CUPS"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Predeterminat)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Seleccioneu la connexi� de la impressora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Com est� connectada la impressora?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Amb un servidor CUPS remot, aqu� no us cal configurar cap\n"
-"impressora; les impressores es detectaran autom�ticament.\n"
-"En cas de dubte, seleccioneu \"Servidor CUPS remot\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Configuraci� de la LAN"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Servidor CUPS remot"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "L'adre�a IP ha d'estar amb el format 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "El n�mero de port ha de ser num�ric"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP del servidor CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configuraci� del tipus d'arrencada"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "S'estan detectant els dispositius..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Ports de comprovaci�"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Cap impressora"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Utilitza la detecci� autom�tica"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "s'ha detectat %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Dispositiu URI d'impressora"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr ""
-"Si us plau, seleccioneu el port s�rie al qual teniu connectat el m�dem."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Dispositiu URI d'impressora"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Configuraci�"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "S'est� instal�lant el paquet %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "S'est� instal�lant el paquet %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "S'est� llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "S'est� llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opcions de la impressora lpd remota"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Per poder utilitzar una cua d'impressi� lpd remota, necessiteu proporcionar\n"
-"el nom de l'ordinador central del servidor de la impressora i el nom de la\n"
-"cua d'aquest servidor on s'hi han de situar les tasques."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nom de l'ordinador central remot"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nom de l'ordinador central remot"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nom de l'ordinador central remot"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcions de la impressora SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Per poder imprimir a una impressora SMB, heu d'indicar el nom de\n"
-"l'ordinador central SMB (tingueu en compte que pot ser diferent del seu nom\n"
-"TCP/IP) i possiblement l'adre�a IP del servidor d'impressi�, aix� com el "
-"nom\n"
-"de compartici� de la impressora a qu� voleu accedir i el nom d'usuari,\n"
-"contrasenya i informaci� de grup si s�n necessaris."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Ordinador central del servidor SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP del servidor SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nom de compartici�"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grup de treball"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opcions de la impressora NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Per poder imprimir a una impressora NetWare, heu de proporcionar el nom del\n"
-"servidor d'impressi� NetWare (tingueu en compte que pot ser diferent del "
-"nom\n"
-"TCP/IP del seu ordinador central), aix� com el nom de la cua d'impressi� de\n"
-"la impressora a qu� voleu accedir i el nom d'usuari i contrasenya si s�n\n"
-"necessaris."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Servidor de la impressora"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nom de la cua d'impressi�"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Opcions de la impressora de s�col"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Per imprimir a una impressora de s�col, heu d'indicar el nom de l'ordinador\n"
-"central de la impressora i, opcionalment, el n�mero de port."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Nom de l'ordinador central de la impressora"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Nom de l'ordinador central de la impressora"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Dispositiu URI d'impressora"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nom de la impressora"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Descripci�"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Ubicaci�"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "S'est� llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Aix� �s correcte?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Connexi� de la impressora"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Quin tipus d'impressora teniu?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configuraci� del m�dem"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configuraci� d'Internet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Voleu comprovar la impressi�?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Ports de comprovaci�"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "S�, imprimeix ambdues p�gines de prova"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Impressora"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Eines est�ndard"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "S'esta(n) imprimint la(es) p�gina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "S'esta(n) imprimint la(es) p�gina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "S'esta(n) imprimint la(es) p�gina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "S'esta(n) imprimint la(es) p�gina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"La(es) p�gina(es) de prova s'ha(n) enviat al proc�s d'impressi�.\n"
-"Degut a aix�, pot passar un cert temps abans no comenci la impressi�.\n"
-"Estat de la impressi�:\n"
-"%s\n"
-"\n"
-"Funciona correctament?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"La(es) p�gina(es) de prova s'ha(n) enviat al proc�s d'impressi�.\n"
-"Degut a aix�, pot passar un cert temps abans no comenci la impressi�.\n"
-"Funciona correctament?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Cap impressora"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Tanca"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "S'est� desactivant la xarxa"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "S'est� desactivant la xarxa"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Opcions de la impressora"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "S'est� llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configuraci� d'Internet"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"El nom de la impressora nom�s pot constar de lletres, n�meros i el car�cter "
-"de subratllat"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Cap impressora"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "S'est� llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Configura la impressora"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "S'est� comprovant la vostra conexi�..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configura la xarxa"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "El monitor no est� configurat"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "S'est� configurant la xarxa"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Quin sistema d'impressi� voleu utilitzar?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Alt"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoic"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Quin sistema d'impressi� voleu utilitzar?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Seleccioneu la connexi� de la impressora"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Quin sistema d'impressi� voleu utilitzar?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configura la impressora"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "S'est� instal�lant el paquet %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opcions de la impressora"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "S'est� llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Configura la impressora"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Voleu configurar una impressora?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Aquestes s�n les cues d'impressi� seg�ents.\n"
-"Podeu afegir-ne algunes m�s o canviar-ne les existents."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Aquestes s�n les cues d'impressi� seg�ents.\n"
-"Podeu afegir-ne algunes m�s o canviar-ne les existents."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Configura la xarxa"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Mode normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Voleu comprovar la configuraci�?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configuraci� del m�dem"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Voleu comprovar la configuraci�?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Connexi� a Internet compartida"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Connexi� de la impressora"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "S'esta(n) imprimint la(es) p�gina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Voleu comprovar la configuraci�?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "S'est� llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Voleu reiniciar la xarxa"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "S'est� llegint la base de dades de controladors CUPS..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Configuraci� dels proxys"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "El proxy ha de ser http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "El n�mero de port ha de ser num�ric"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "El proxy ha de ser ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Entrada autom�tica"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Contrasenya"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Sense contrasenya"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Les contrasenyes no coincideixen"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "No es pot afegir una partici� a un RAID _formatat_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "No es pot escriure al fitxer %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "l'mkraid ha fallit"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "l'mkraid ha fallit (potser manquen eines del RAID?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "No hi ha prou particions per al nivell RAID %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un programador d'ordres peri�diques."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"L'apmd s'utilitza per monitoritzar l'estat de la bateria i registrar-lo "
-"mitjan�ant el registre del sistema.\n"
-"Tamb� es pot utilitzar per apagar l'ordinador quan queda poca bateria."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Executa les ordres programades per l'ordre 'at' a l'hora que es va\n"
-"especificar en executar 'at', i executa les ordres 'batch' quan la\n"
-"mitjana de c�rrega �s prou baixa."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"El cron �s un programa UNIX est�ndard que executa programes determinats\n"
-"per l'usuari en hores programades. El vixie cron afegeix un cert nombre de\n"
-"caracter�stiques al cron b�sic, incloent seguretat millorada i opcions\n"
-"de configuraci� m�s potents."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"El GPM afegeix suport de ratol� a aplicacions Linux basades en text, com ara "
-"el Midnight Commander. Tamb� permet operacions de tallar i enganxar amb el "
-"ratol�, i inclou suport de men�s desplegables a la consola."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"L'Apache �s un servidor de World Wide Web. S'utilitza per servir fitxers\n"
-"HTML i CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"El proc�s superservidor d'Internet (conegut normalment com 'inetd') inicia\n"
-"altres serveis d'Internet a mesura que es van necessitant. �s el "
-"responsable\n"
-"d'iniciar molts serveis, incloent el telnet, l'ftp, l'rsh i l'rlogin. Si\n"
-"s'inhabilita l'inetd s'inhabiliten tots els serveis de qu� �s responsable."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Aquest paquet carrega el mapa de teclat seleccionat segons s'ha definit\n"
-"a /etc/sysconfig/keyboard. Aix� es pot seleccionar mitjan�ant la utilitat\n"
-"kbdconfig.\n"
-"Per a la majoria d'ordinadors, s'ha de deixar habilitat."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"L'lpd �s el proc�s d'impressi� necessari per a que l'lpr funcioni\n"
-"correctament. B�sicament, es tracta d'un servidor que assigna les\n"
-"tasques d'impressi� a la(es) impressora(es)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) �s un servidor de noms de domini (DNS) que s'utiilitza\n"
-"per convertir noms d'ordinadors centrals en adreces IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Munta i desmunta tots els punts de muntatge dels sistemes de fitxers\n"
-"de xarxa (NFS), SMB (gestor de xarxes d'�rea local/Windows) i NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/Desactiva totes les interf�cies de xarxa configurades per\n"
-"iniciar-se durant l'arrencada."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"L'NFS �s un popular protocol de compartici� de fitxers en xarxes TCP/IP.\n"
-"Aquest servei proporciona la funcionalitat del servidor NFS, que es\n"
-"configura mitjan�ant el fitxer /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"L'NFS �s un popular protocol de compartici� de fitxers en xarxes TCP/IP\n"
-"Aquest servei proporciona la funcionalitat de blocatge del fitxer NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"El suport PCMCIA serveix normalment per suportar coses com ara l'ethernet\n"
-"i els m�dems en port�tils. No s'iniciar� tret que es configuri, de manera\n"
-"que no hi ha problema per instal�lar-lo en ordinadors que no el necessiten."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"El portmapper gestiona les connexions RPC, que s�n utilitzades per\n"
-"protocols com ara l'NFS i l'NIS. El servidor portmap s'ha d'estar\n"
-"executant en ordinadors que actuen com a servidors per a protocols que\n"
-"utilitzen el mecanisme RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"El Postfix �s un agent de transport de correu, que �s el programa que\n"
-"passa el correu d'un ordinador a un altre."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Desa i recupera el generador d'entropia del sistema per a\n"
-"la generaci� de nombres aleatoris d'una m�s alta qualitat."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"El proc�s 'routed' permet que la taula d'encaminadors IP autom�tics\n"
-"s'actualitzi mitjan�ant el protocol RIP. Mentre que el RIP s'utilitza\n"
-"�mpliament en xarxes petites, les xarxes complexes necessiten protocols\n"
-"d'encaminament m�s complexs."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"El protocol rstat permet que els usuaris d'una xarxa recuperin\n"
-"m�trics de funcionament de qualsevol ordinador de la mateixa."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"El protocol rusers permet que els usuaris d'una xarxa identifiquin\n"
-"qui est� connectat en altres ordinadors de la mateixa."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"El protocol rwho permet que els usuaris remots obtinguin una llista\n"
-"de tots els usuaris que est�n connectats a un ordinador que est�\n"
-"executant el proc�s rwho (similar al finger)."
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Executa el sistema X-Window en iniciar"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"El syslog �s el sistema que utilitzen molts processos per registrar\n"
-"missatges en diversos fitxers de registre del sistema. �s aconsellable\n"
-"executar-lo sempre."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Inicia i atura l'X Font Server en arrencar i apagar l'ordinador."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Escolliu els serveis que s'han d'iniciar autom�ticament durant l'arrencada"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Impressora"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Mode de sistema"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opcions de la impressora lpd remota"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Servidor, base de dades"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "dispositiu"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "s'est� executant"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "aturat"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Serveis i dimonis"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Malauradament no hi ha m�s informaci�\n"
-"sobre aquest servei."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "En arrencar"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Estat:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sector"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Resta del m�n"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Acc�s a Internet"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multim�dia - Gr�fics"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Desenvolupament"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Control Center"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Interf�cie de la xarxa"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Ordinador central del servidor SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Jocs"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "expert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "obligatori"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "S'est� instal�lant el paquet %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"No puc llegir la vostra taula de particions, est� massa malmesa per a mi :(\n"
-"Intentar� seguir buidant les particions incorrectes"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Error"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Publica la configuraci� de la instal�laci� "
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configuraci� del tipus d'arrencada"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Felicitats!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instal�la"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Afegeix un usuari"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "S'est� formatant el fitxer de loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Fitxer de c�pia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Fitxer de c�pia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Fitxer de c�pia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Selecci� del grup de paquets"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Si us plau, escolliu els paquets que voleu instal�lar"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Elimina la cua"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Elimina el Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Nom d'usuari"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Si us plau, comproveu el ratol�."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Si us plau, torneu-ho a intentar"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Si us plau, torneu-ho a intentar"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Sense contrasenya"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Connexi� LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Seleccioneu la connexi� de la impressora"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Si us plau, selecioneu la disposici� del vostre teclat."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Si us plau, feu clic a una partici� "
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Si us plau, escolliu els paquets que voleu instal�lar"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Fitxer de c�pia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Si us plau, comproveu el ratol�."
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Fitxer de c�pia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Xarxa:"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Nom d'usuari"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Si us plau, escolliu els paquets que voleu instal�lar"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Voleu utilitzar l'optimitzaci� del disc dur?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Voleu utilitzar l'optimitzaci� del disc dur?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Espera"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "De bola"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "De bola"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Opcions del m�dul:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Configuraci� de xarxa"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Si us plau, escolliu els paquets que voleu instal�lar"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-#, fuzzy
-msgid "across Network"
-msgstr "Xarxa:"
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Si us plau, escolliu els paquets que voleu instal�lar"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Sistemes de fitxers"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcions"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-"Si us plau, seleccioneu el port s�rie al qual teniu connectat el m�dem."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Configuraci� de xarxa"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Fitxer de c�pia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Si us plau, seleccioneu el vostre tipus de ratol�."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Fitxer de c�pia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Restaura des del disquet"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Si us plau, seleccioneu el vostre tipus de ratol�."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Altres"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instal�la el sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Restaura des del fitxer"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Restaura des del fitxer"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Personalitzada"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Ajuda"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Anterior"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Estat:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Fitxer de c�pia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Restaura des del fitxer"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Text"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Paquets a instal�lar"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Fitxer de c�pia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Fitxer de c�pia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Fitxer de c�pia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Desa al fitxer"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Si us plau, comproveu el ratol�."
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Si us plau, escolliu els paquets que voleu instal�lar"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Configuraci� de xarxa"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Configuraci� de xarxa"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Configuraci� de la LAN"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Configuraci� de la LAN"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Sistemes de fitxers"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Ha fallat la instal�laci� del %s. S'ha produ�t l'error seg�ent:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "no s'ha trobat %s"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Fet"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formata el disquet"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "S'est� preparant la instal�laci�"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "limita"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "limita"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formata les particions"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "S'estan desinstal�lant els RPM"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Configuraci� de la LAN"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Punt de muntatge"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Escolliu les particions que voleu formatar"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Oficina"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Interromp"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Impressora"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instal�la el sistema"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Seleccioneu el fitxer"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Impressora remota"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Missatge d'inicialitzaci�"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "No teniu cap adaptador de xarxa al sistema!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instal�la"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "No teniu cap adaptador de xarxa al sistema!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Surt de la instal�laci�"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Connexi� a Internet compartida"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "La connexi� a Internet compartida est� habilitada"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuraci� de la connexi� compartida a Internet ja s'ha dut a terme.\n"
-"Ara est� habilitada.\n"
-"\n"
-"Qu� voleu fer?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "inhabilita"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "deixa-ho c�rrer"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "torna a configurar"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "S'estan inhabilitant els servidors..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Ara, la compartici� de la connexi� a Internet est� inhabilitada."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "La connexi� a Internet compartida est� inhabilitada"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuraci� de la connexi� compartida a Internet ja s'ha dut a terme.\n"
-"Ara est� inhabilitada.\n"
-"\n"
-"Qu� voleu fer?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "habilita"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "S'estan habilitant els servidors..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Ara, la connexi� compartida a Internet est� habilitada."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Ara configurareu l'ordinador per tal que comparteixi la connexi� a "
-"Internet.\n"
-"Amb aquesta caracter�stica, altres ordinadors de la vostra xarxa local\n"
-"podran utilitzar la connexi� a Internet d'aquest ordinador.\n"
-"\n"
-"Nota: per configurar una xarxa d'�rea local (LAN), us cal un adaptador de "
-"xarxa dedicat."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interf�cie %s (utilitzant el m�dul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interf�cie %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "No teniu cap adaptador de xarxa al sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"No s'ha detectat cap adaptador de xarxa ethernet al sistema. Si us plau, "
-"executeu l'eina de configuraci� de maquinari."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interf�cie de la xarxa"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Nom�s teniu un adaptador de xarxa configurat al sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Ara configurar� la vostra xarxa d'�rea local amb aquest adaptador."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Si us plau, escolliu l'adaptador de xarxa que es connectar�\n"
-"a la vostra xarxa d'�rea local."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "El monitor no est� configurat"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Configuraci� del tipus d'arrencada"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Configuraci� del m�dem"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP del servidor CUPS"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"S'ha trobat un conflicte potencial d'adre�a LAN en la configuraci� actual de "
-"%s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "S'ha detectat la configuraci� del sistema de tallafocs!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Atenci�! S'ha detectat una configuraci� existent del sistema de tallafocs. "
-"Potser us caldr� fer algun ajustament manual despr�s de la instal�laci�."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "S'est� configurant..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"S'estan configurant les seq��ncies, instal�lant el programari, iniciant els "
-"servidors..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Hi ha hagut problemes en instal�lar el paquet %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Ja est� tot configurat.\n"
-"Ara podeu compartir la connexi� a Internet amb altres ordinadors de la "
-"vostra xarxa d'�rea local utilitzant la configuraci� autom�tica de xarxa "
-"(DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "La configuraci� ja s'ha realitzat, per� ara est� inhabilitada."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "La configuraci� ja s'ha realitzat i ara est� habilitada."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "No s'ha configurat mai cap connexi� compartida a Internet."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configuraci� de la compartici� de la connexi� a Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Benvingut a la utilitat de compartici� de la connexi� a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Feu clic a Configura per executar l'auxiliar de configuraci�."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuraci� de xarxa (%d adaptadors)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Suprimeix el perfil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Perfil a suprimir:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Perfil nou..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nom de l'ordinador central: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Acc�s a Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipus:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Passarel�la:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Intef�cie:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Estat:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configura l'acc�s a Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configuraci� de la LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Programa de control"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interf�cie"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocol"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Estat:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configura la xarxa d'�rea local..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistent..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Aplica"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Si us plau, espereu... s'est� aplicant la configuraci�"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Connectat"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Sense connexi�"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Connecta..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Desconnecta..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configuraci� de la LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocol d'arrencada"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Iniciat en l'arrencada"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Actiu"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Actiu"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configuraci� de la connexi� a Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configuraci� de la connexi� a Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipus de connexi�: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Par�metres"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Passarel�la"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Targeta Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "S'est� establint el nivell de seguretat"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Control Center"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Escolliu l'eina que voleu utilitzar "
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Canadenc (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Island�s"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "s�rie"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "sintaxi: keyboarddrake [--expert] [teclat]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Si us plau, selecioneu la disposici� del vostre teclat."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Voleu que la tecla Enrere efectu� un Suprimeix en la consola?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Canvieu el CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Si us plau, inseriu el CD-ROM d'instal�laci� a la unitat i despr�s\n"
-"premeu D'acord.\n"
-"Si no el teniu, premeu Cancel�la per evitar la instal�laci� en directe."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "No es pot iniciar l'actualitzaci� en directe !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Mostr-ho nom�s per a avui"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fitxer/_Nou"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fitxer/_Obre"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fitxer/_Desa"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fitxer/_Anomena i desa"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fitxer/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcions"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcions/Prova"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Ajuda"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Ajuda/_Quant a..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Nom d'usuari"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "missatges"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "cerca"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Eina per veure els registres"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Par�metres"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "que coincideixin amb"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "per� que no coincideixein amb"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Escolliu el fitxer"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Calendari"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Contingut del fitxer"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "si us plau, espereu, s'est� analitzant el fitxer: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Configuraci� de la LAN"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache i Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "ombra"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "interessant"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "s'est� formatant"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Configuraci�"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Anomena i desa..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Si us plau, seleccioneu el vostre tipus de ratol�."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "no s'ha trobat cap serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Voleu emular el tercer bot�?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Seleccioneu una targeta gr�fica"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Dispositiu d'arrencada"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Configuraci� del sistema de tallafocs"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Configuraci� del sistema de tallafocs"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Sistema de tallafocs\n"
-"\n"
-"Ja heu configurat un tallafocs.\n"
-"Feu clic a Configura per canviar o eliminar el tallafoc"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Sistema de tallafocs\n"
-"\n"
-"Feu clic a Configura per configurar un tallafocs est�ndard"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Escolliu el vostre idioma"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Tipus d'instal�laci�"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detecci� del disc dur"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configura el ratol�"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Escolliu el vostre teclat"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Seguretat"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Sistemes de fitxers"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formata les particions"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Paquets a instal�lar"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instal�la el sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Afegeix un usuari"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configura la xarxa"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configura els serveis"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instal�la el LILO"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Crea un disc d'arrencada"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configura l'X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instal�la el sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Surt de la instal�laci�"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configurador del tinyfirewall\n"
-"\n"
-"Amb aix� es configura un tallafocs personal per a aquest ordinador Linux "
-"Mandrake.\n"
-"Per a una potent soluci� de tallafocs dedicada, consulteu si us plau la "
-"distribuci� especialitzada MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Ara us farem preguntes sobre els serveis a qu� voleu autoritzar que\n"
-"Internet us connecti. Si us plau, penseu-hi a fons perqu� la seguretat\n"
-"del vostre ordinador �s important.\n"
-"\n"
-"Si us plau, si un moment donat no esteu utilitzant algun d'aquests serveis,\n"
-"desactiveu-ne el tallafocs. Podeu canviar aquesta configuraci� sempre que\n"
-"vulgueu tornant a executar aquesta aplicaci�!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor de web en aquest ordinador que necessiteu que\n"
-"pugui veure tothom a Internet? Si esteu executant un servidor de web a qu�\n"
-"nom�s ha d'accedir aquest ordinador, aqu� podeu respondre tranquil�lament "
-"NO.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor de noms en aquest ordinador? Si no n'heu\n"
-"configurat cap per proporcionar la IP i la informaci� de zona a tothom a\n"
-"Internet, si us plau responeu NO.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Voleu autoritzar les connexions Secure Shell (ssh) d'entrada? Es tracta\n"
-"d'una substituci� del Telnet que podeu utilitzar per entrar. Si ara esteu\n"
-"utilitzant el Telnet, passeu-vos a l'ssh sense cap mena de dubte; el\n"
-"Telnet no est� xifrat, de manera que us poden robar la contrasenya si\n"
-"l'utilitzeu, mentre que l'ssh est� xifrat i no permet cap mena d'intercepci�."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Voleu autoritzar les connexions Telnet d'entrada?\n"
-"Aix� �s tremendament insegur, com hem dit a la pantalla anterior. Us\n"
-"recomanem vivament que respongueu No aqu� i que utilitzeu l'ssh en comptes\n"
-"del Telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Esteu executant un servidor d'FTP que necessiteu que sigui accessible a\n"
-"Internet? Si �s aix�, us recomanen vivament que nom�s l'utilitzeu per a\n"
-"transfer�ncies an�nimes, ja que qualsevol contrasenya que s'envia per FTP\n"
-"pot ser robada, at�s que l'FTP no utilitza xifratge per a la transfer�ncia\n"
-"de contrasenyes.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor de correu? Si esteu enviant els missatges\n"
-"a trav�s del pine, el mutt o qualsevol altre client de correu basat en\n"
-"text, probablement �s aix�. En cas contrari, desactiveu-ne el tallafocs.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor POP o IMAP? Aix� s'utilitzaria\n"
-"per allotjar comptes de correu dels usuaris, no basats en web,\n"
-"mitjan�ant aquest ordinador.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Sembla que esteu utilitzant un nucli 2.2. Si l'ordinador de\n"
-"casa o de l'oficina estableix autom�ticament la IP de la vostra\n"
-"xarxa (assignaci� din�mica), us cal autoritzar aix�. �s aquest el cas?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"El vostre ordinador est� sincronitzat pel que fa al temps amb un altre?\n"
-"Normalment, aix� ho utilitzen organitzacions Unix/Linux mitjanes-grans\n"
-"per sincronitzar el temps de les entrades i coses aix�. Si no sou una part\n"
-"d'una oficina gran i no heu sentit parlar d'aix�, probablement no us trobeu\n"
-"en aquest cas."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"La configuraci� est� completa. Podem desar aquests canvis al disc?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "No es pot obrir %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "No s'ha pogut obrir %s per escriure-hi: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Configuraci� del sistema de tallafocs"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Si us plau, espereu, s'est� preparant la instal�laci�"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Servidor, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ordinador de xarxa (client)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servidor NFS, Servidor SMB, Servidor intermediari, Servidor SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oficina"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Estaci� de treball GNOME"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Eines per al Palm Pilot o per al Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estaci� de treball"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Servidor, Tallafoc/Encaminador"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programes d'ofim�tica: processadors de textos (kword, abiword), gestors de "
-"fulls de c�lcul (kspread, gnumeric), visualitzadors pdf, etc."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Eines d'�udio: reproductors d'mp3 o midi, mescladors, etc."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Llibres i Com es fa... sobre el Linux i el programari lliure"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Estaci� de treball KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multim�dia - V�deo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conjunt d'eines per al correu, not�cies, web, transfer�ncia de fitxers i xat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Servidor, base de dades"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Eines per facilitar la configuraci� de l'ordinador"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multim�dia - So"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitats"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentaci�"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Eines de consola"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Estaci� d'Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Estaci� multim�dia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Configuraci� de la LAN"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "M�s escriptoris gr�fics (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "Entorn d'escriptori K, l'entorn gr�fic b�sic que inclou diverses eines"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Entorn gr�fic"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache i Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Eines per crear i gravar CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Estaci� de treball Office"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programes gr�fics com ara el Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Biblioteques de desenvolupament C i C++, programes i fitxers inclosos"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Servidor d'ordinador de xarxa"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Servidor, Correu/Groupware/Not�cies"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Estaci� de jocs"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Reproductors i editors de v�deo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multim�dia - Gr�fics"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programes d'entreteniment: acci�, jocs de taula, estrat�gia, etc."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conjunt d'eines per llegir i enviar correu i not�cies (pine, mutt, tin...) i "
-"per navegar pel Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arxivament, emuladors, monitoritzaci�"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Comptabilitat personal"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Entorn gr�fic amb un conjunt d'aplicacions i eines d'escriptori f�cil "
-"d'utilitzar"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients per a diferents protocols, incloent l'ssh"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Acc�s a Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programes de reproducci�/edici� de so i v�deo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Altres escriptoris gr�fics"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editors, int�rprets d'ordres, eines de fitxer, terminals"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programes per gestionar els vostres comptes, com ara el gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gesti� d'informaci� personal"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multim�dia - Gravaci� de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Estaci� cient�fica de treball"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Interromp"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Cap"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Escolliu l'usuari per omissi�:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Impressora remota"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Ara podeu proporcionar les seves opcions per al m�dul %s."
-
-#~ msgid "mount failed"
-#~ msgstr "ha fallat el muntatge"
-
-#~ msgid "Low"
-#~ msgstr "Baix"
-
-#~ msgid "Medium"
-#~ msgstr "Mitj�"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Poques millores per a aquest nivell de seguretat; la principal �s que hi "
-#~ "ha\n"
-#~ "m�s avisos i comprovacions de seguretat."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Multim�dia"
-
-#~ msgid "Boot mode"
-#~ msgstr "Mode d'arrencada"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Expert"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "El GNU/Linux gestiona l'hora en GMT (Hora de Greenwich) i la\n"
-#~ "tradueix a l'hora local segons la zona hor�ria seleccionada."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Connecta't a Internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Desconnecta't d'Internet"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Configura la connexi� de xarxa (LAN o Internet)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "A quin disc us voleu despla�ar?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Si us plau, escolliu els paquets que voleu instal�lar"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Informaci�"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Estaci� de treball GNOME"
-
-#~ msgid "authentification"
-#~ msgstr "autenticaci�"
-
-#~ msgid "user"
-#~ msgstr "usuari"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server.  It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "L'Apache �s un servidor de World Wide Web. S'utilitza per servir fitxers\n"
-#~ "HTML i CGI."
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) �s un servidor de noms de domini (DNS) que s'utiilitza\n"
-#~ "per convertir noms d'ordinadors centrals en adreces IP."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Si us plau, seleccioneu el vostre tipus de ratol�."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Surt"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Muntatge autom�tic del suport extra�ble"
-
-#~ msgid "Active"
-#~ msgstr "Actiu"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "No"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "S'ha detectat una impressora, model \"%s\", a"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Dispositiu de la impressora local"
-
-#~ msgid "Printer Device"
-#~ msgstr "Dispositiu d'impressora"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Servidor CUPS remot"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Servidor CUPS remot"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Mode de sistema"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Altres"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Si us plau, selecioneu la disposici� del vostre teclat."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Si us plau, feu clic a una partici� "
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tipus: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Fitxer de c�pia de seguretat incorrecte"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Configura l'X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Dispositiu d'impressora"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Cancel�la"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "D'acord"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Tanca"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "toot"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "S'est� comprovant la vostra conexi�..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "S'est� tancant la connexi�..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "La connexi� no est� tancada.\n"
-#~ "Intenteu fer-ho manualment executant\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "a root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Ara, el sistema est� desconnectat."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Escolliu la mida que voleu instal�lar"
-
-#~ msgid "Total size: "
-#~ msgstr "Mida total: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Si us plau, espereu, "
-
-#~ msgid "Total time "
-#~ msgstr "Temps total "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Voleu utilitzar la configuraci� existent per a X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "A quin dispositiu est� connectada la vostra impressora?\n"
-#~ "(tingueu en compte que /dev/lp0 equival a LPT1:)\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Compte, l'adaptador de xarxa ja est� configurat. El tornar� a configurar."
-
-#~ msgid "New"
-#~ msgstr "Nou"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Elimina"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Si us plau, feu clic a una partici� "
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Ambig�itat (%s), sigueu m�s prec�s\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (predeterminat %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "La vostra elecci�? (predeterminat %s  introdu�u `cap' per a cap) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "no es pot obrir /etc/sysconfig/autologin per a lectura: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Voleu reiniciar la xarxa"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Hi esteu d'acord?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Ara reiniciar� el dispositiu de xarxa:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Ara reiniciar� el dispositiu de xarxa %s. Hi esteu d'acord?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Tret que sapigueu expressament que s'ha d'indicar una altra cosa, "
-#~ "l'elecci�\n"
-#~ "habitual �s \"/dev/hda\" (el disc IDE mestre primari) o b� \"/dev/sda\"\n"
-#~ "(el primer disc SCSI)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Tipus de connexi�: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Escolliu l'usuari per omissi�:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Si us plau, comproveu el ratol�."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "Escolliu l'idioma que voleu utilitzar per a la instal�laci� i per a l'�s "
-#~ "del sistema."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Heu d'acceptar els termes de la llic�ncia de m�s amunt per poder "
-#~ "continuar la instal�laci�.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si us plau, feu clic a \"Accepto\" si hi esteu d'acord.\n"
-#~ "\n"
-#~ "\n"
-#~ "Feu clic a \"No accpeto\" si no hi esteu d'acord. La instal�laci� "
-#~ "finalitzar� sense modificar la instal�laci� actual."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Escolliu el vostre tipus de teclat de la llista inferior"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Si desitgeu que altres idiomes (a m�s del que vau triar en\n"
-#~ "iniciar la instal�laci�) estiguin disponibles despr�s de la "
-#~ "instal�laci�,\n"
-#~ "escolliu-los de la llista de m�s amunt. Si els voleu seleccionar tots,\n"
-#~ "nom�s cal que seleccioneu \"Tots\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Seleccioneu:\n"
-#~ "\n"
-#~ "  - Personalitzada: Si esteu familiaritzat amb el Linux, podreu\n"
-#~ "triar l'�s del sistema instal�lat entre Normal, Desenvolupament o\n"
-#~ "Servidor. Trieu \"Normal\" per a una instal�laci� per a un �s\n"
-#~ "general del vostre ordinador, \"Desenvolupament\" si utilitzareu\n"
-#~ "l'ordinador principalment per a desenvolupament de programari,\n"
-#~ "o \"Servidor\" si voleu instal�lar un servidor convencional (per\n"
-#~ "a correu, impressions...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Per a experts: Si domineu el GNU/Linux i voleu realitzar una\n"
-#~ "instal�laci� totalment personalitzada, aquest �s el vostre\n"
-#~ "tipus d'instal�laci�. Podreu seleccionar l'�s del vostre sistema\n"
-#~ "com a \"Personalitzada\"."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Ara heu de decidir com utilitzareu l'ordinador. Les opcions s�n:\n"
-#~ "\n"
-#~ "* Estaci� de treball: l'elecci� ideal si penseu utilitzar l'ordinador "
-#~ "b�sicament per a l'�s quotidi�, a la feina o\n"
-#~ "  a casa.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Desenvolupament: si penseu utilitzar l'ordinador b�sicament per a "
-#~ "desenvolupament de programari, aquesta �s l'elecci� ideal.\n"
-#~ "  Tindreu instal�lada una completa col�lecci� de programari per poder "
-#~ "compilar, depurar i formatar codi font,\n"
-#~ "  o crear paquets de programari.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Servidor: si penseu utilitzar l'ordinador com a servidor, aquesta �s "
-#~ "l'elecci� ideal, ja sigui un servidor de fitxers (NFS o\n"
-#~ "  SMB), un servidor d'impressi� (tipus Unix o Microsoft Windows), un "
-#~ "servidor d'autenticaci� (NIS), un servidor\n"
-#~ "  de bases de dades, etc. En canvi, no espereu que se us instal�lin coses "
-#~ "com ara el KDE, el GNOME, etc.)"
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Ara podeu seleccionar el grup de paquets que voleu instal�lar o "
-#~ "actualitzar.\n"
-#~ "\n"
-#~ "\n"
-#~ "El DrakX comprovar� si teniu prou espai per instal�lar-los tots i, si no, "
-#~ "us\n"
-#~ "ho avisar�. Si voleu seguir igualment, continuar� amb la instal�laci� de "
-#~ "tots\n"
-#~ "els grups seleccionats per� no n'instal�lar� alguns de menys inter�s. Al "
-#~ "final\n"
-#~ "de la llista podeu seleccionar l'opci� \"Selecci� individual de paquets"
-#~ "\", i\n"
-#~ "en aquest cas haureu de navegar per m�s de 1.000 paquets..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Ara podeu triar individualment tots els paquets que voleu instal�lar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Podeu expandir o reduir l'arbre fent clic a les opcions del rac� esquerre "
-#~ "de la finestra de paquets.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si preferiu veure els paquets ordenats alfab�ticament, feu clic a la "
-#~ "icona\n"
-#~ "\"Commuta entre ordenaci� plana i per grups\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no voleu ser avisat pel que fa a les depend�ncies, feu clic a "
-#~ "\"Depend�ncies\n"
-#~ "autom�tiques\". Si ho feu, tingueu en compte que el fet de "
-#~ "desseleccionar\n"
-#~ "un paquet pot causar la desselecci� d'altres paquets que en depenen, i "
-#~ "no\n"
-#~ "us n'assabentareu."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Si teniu tots els CD de la llista superior, feu clic a D'acord.\n"
-#~ "Si no teniu cap d'aquests CD, feu clic a Cancel�la.\n"
-#~ "Si nom�s falten alguns CD, desseleccioneu-los i feu clic a D'acord."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Si voleu connectar l'ordinador a Internet o a una xarxa local, "
-#~ "seleccioneu\n"
-#~ "l'opci� corresponent, per� abans recordeu engegar el dispositiu per tal "
-#~ "que\n"
-#~ "el DrakX el detecti autom�ticament.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no teniu connexi� a Internet ni a cap xarxa local, escolliu "
-#~ "\"Inhabilita el servei de xarxa\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu configurar la xarxa m�s endavant, despr�s de la instal�laci�, o "
-#~ "si\n"
-#~ "heu acabat la configuraci� de la connexi� de xarxa, trieu \"Fet\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "No s'ha detectat cap m�dem. Si us plau, seleccioneu el port s�rie on est� "
-#~ "connectat.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per a la vostra informaci�, el primer port s�rie (anomenat \"COM1\" en "
-#~ "Microsoft Windows) s'anomena \"ttyS0\" en Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Ara podeu introduir les opcions de marcatge. Si no sabeu qu� heu "
-#~ "d'introduir,\n"
-#~ "o si no n'esteu segur, podreu aconseguir la informaci� necess�ria del "
-#~ "vostre\n"
-#~ "prove�dor d'Internet. Si no introdu�u aqu� la informaci� del DNS "
-#~ "(servidor de\n"
-#~ "noms), aquesta informaci� s'obtindr� del prove�dor en el moment de "
-#~ "connectar."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Si el m�dem que teniu �s extern, engegueu-lo per tal que el DrakX el "
-#~ "detecti autom�ticament."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Si us plau, engegueu el m�dem i trieu-ne el correcte."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Si no esteu segur de si la informaci� de m�s amunt �s correcta, si no "
-#~ "sabeu\n"
-#~ "qu� introduir o si no n'esteu segur, podreu aconseguir la informaci�\n"
-#~ "necess�ria del vostre prove�dor d'Internet. Si no introdu�u aqu� la\n"
-#~ "informaci� del DNS (servidor de noms), aquesta informaci� s'obtindr� del\n"
-#~ "prove�dor en el moment de connectar."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Ara podeu introduir el nom del vostre ordinador central. Si no esteu "
-#~ "segur del que hi\n"
-#~ "heu d'introduir, el vostre prove�dor us en donar� la informaci� correcta."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Ara podeu configurar el voste dispositiu de xarxa.\n"
-#~ "\n"
-#~ "   * Adre�a IP: si no la sabeu, o no n'esteu segur, pregunteu-la a "
-#~ "l'administrador de la xarxa.\n"
-#~ "     No heu d'introduir cap adre�a IP si m�s avall seleccioneu l'opci� "
-#~ "\"IP autom�tica\".\n"
-#~ "\n"
-#~ "  * M�scara de la xarxa: Normalment, \"255.255.255.0\" �s una bona "
-#~ "elecci�. Si no n'esteu segur, consulteu-ho a l'administrador de la "
-#~ "xarxa.\n"
-#~ "\n"
-#~ "  * IP autom�tica: si la vostra xarxa utilitza els protocols BOOTP o "
-#~ "DHCP,\n"
-#~ "seleccioneu aquesta opci�. Si es selecciona, no cal cap valor per a "
-#~ "\"Adre�a IP\". Si no n'esteu segur, consulteu-ho a l'administrador de la "
-#~ "xarxa."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Ara podeu introduir el nom del vostre ordinador central, si cal. Si no "
-#~ "el\n"
-#~ "sabeu, o no esteu segur de qu� heu d'introduir, consulteu a "
-#~ "l'administrador de la xarxa."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Ara podeu introduir el nom del vostre ordinador central, si cal. Si no\n"
-#~ "el sabeu, o si esteu segur de qu� introduir, deixeu-ho en blanc."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Ara podeu introduir les opcions de marcatge. Si no esteu segur del que "
-#~ "hi\n"
-#~ "heu d'introduir, el vostre prove�dor us en donar� la informaci� correcta."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Si teniu previst utilitzar proxys, configureu-los ara. Si no sabeu si\n"
-#~ "n'utilitzareu, consulteu-ho a l'administrador de la xarxa o al vostre\n"
-#~ "prove�dor."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Podeu instal�lar el paquet criptogr�fic si la vostra connexi� a Internet\n"
-#~ "s'ha configurat correctament. Escolliu primer una r�pilca des de la qual\n"
-#~ "vulgueu descarregar paquets i despr�s seleccioneu els paquets a "
-#~ "instal�lar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tingueu en compte que heu de seleccionar la r�plica i els paquets\n"
-#~ "criptogr�fics segons la vostra legislaci�."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Ara podeu seleccionar la zona hor�ria segons el lloc on viviu."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Podeu configurar una impressora local (connectada al vostre ordinador) o\n"
-#~ "remota (accessible mitjan�ant una xarxa Unix, Netware o Microsoft "
-#~ "Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Si voleu imprimir, trieu un sistema de impressi� entre CUPS i LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "El CUPS �s un nou sistema d'impressi�, potent i flexible, per a sistemes "
-#~ "Unix\n"
-#~ "(CUPS significa \"Common Unix Printing System\"). �s el sistema "
-#~ "d'impressi�\n"
-#~ "per defecte en Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "L'LPR �s l'antic sistema d'impressi� utilitzat en distribucions anteriors "
-#~ "de\n"
-#~ "Mandrake Linux distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no teniu impressora, feu clic a \"Cap\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "El GNU/Linux pot treballar amb molts tipus d'impressores, per� cada un\n"
-#~ "d'aquests tipus requereix una configuraci� diferent.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si teniu la impressora connectada f�sicament a l'ordinador, seleccioneu\n"
-#~ "\"Impressora local\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora que es troba en un ordinador Unix "
-#~ "remot,\n"
-#~ "seleccioneu \"Impressora remota\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora que es troba en un ordinador Microsoft\n"
-#~ "Windows remot (o en un ordinador Unix que utilitza el protocol SMB),\n"
-#~ "seleccioneu \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Si us plau, engegueu la impressora abans de continuar per tal que el "
-#~ "DrakX\n"
-#~ "la pugui detectar.\n"
-#~ "\n"
-#~ "Aqu� heu d'introduir algunes dades.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nom de la impressora: l'spool d'impressi� utilitza \"lp\" com a nom "
-#~ "per\n"
-#~ "omissi� de la impressora. Per tant, heu de tenir una impressora "
-#~ "anomenada\n"
-#~ "\"lp\".\n"
-#~ "     Si nom�s teniu una impressora, podeu donar-li diversos;\n"
-#~ "noms; nom�s cal que els separeu amb el car�cter \"|\". Per tant,\n"
-#~ "si preferiu un nom m�s expressiu, l'heu d'indicar en primer lloc\n"
-#~ "(per exemple: \"La meva impressora|lp\").\n"
-#~ "     La impressora que contingui \"lp\" al(s) nom(s) ser� la impressora "
-#~ "per omissi�.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Descripci�: �s opcional, per� pot ser �til si teniu diverses\n"
-#~ "impressores connectades a l'ordinador o si permeteu que altres\n"
-#~ "ordinadors accedeixin a aquesta impressora.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ubicaci�: si voleu incloure informaci� sobre la ubicaci� de la\n"
-#~ "impressora, feu-ho aqu� (podeu escriure el que vulgueu, (per exemple,\n"
-#~ "\"2n pis\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Aqu� heu d'introduir algunes dades.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nom de la cua: l'spool d'impressi� utilitza \"lp\" com a nom per\n"
-#~ "omissi� de la impressora. Per tant, heu de tenir una impressora "
-#~ "anomenada\n"
-#~ "\"lp\".\n"
-#~ "     Si nom�s teniu una impressora, podeu donar-li diversos;\n"
-#~ "noms; nom�s cal que els separeu amb el car�cter \"|\". Per tant,\n"
-#~ "si preferiu un nom m�s expressiu, l'heu d'indicar en primer lloc\n"
-#~ "(per exemple: \"La meva impressora|lp\").\n"
-#~ "     La impressora que contingui \"lp\" al(s) nom(s) ser� la impressora "
-#~ "per omissi�.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Directori d'spool: les tasques d'impressi� s'emmagatzemen en aquest "
-#~ "directori.Conserveu la opci� predeterminada si no sabeu quina utilitzar\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     Si voleu accedir a una impressora que es troba en un ordinador Unix\n"
-#~ "remot, seleccioneu \"Impressora lpd remota\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Si voleu accedir a una impressora que es troba en un ordinador\n"
-#~ "Microsoft Windows remot (o en un ordinador Unix que utilitza el protocol\n"
-#~ "SMB), seleccioneu \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "     Si voleu accedir a una impressora que es troba en una xarxa "
-#~ "NetWare,\n"
-#~ "seleccioneu \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "No s'ha detectat la vostra impressora. Si us plau, introdu�u el nom del\n"
-#~ "dispositiu a qu� est� connectada.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per a la vostra informaci�, la majoria d'impressores estan connectades "
-#~ "al\n"
-#~ "primer port paral�lel, que s'anomena  \"/dev/lp0\" en GNU/Linux i \"LPT1"
-#~ "\"\n"
-#~ "en Microsoft Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Ara heu de seleccionar la vostra impressora a la llista superior."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Si us plau, seleccioneu les opcions correctes segons la vostra "
-#~ "impressora;\n"
-#~ "consulteu-ne la documentaci� si no sabeu qu� heu de seleccionar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Podreu comprovar la configuraci� en el pas seg�ent i modificar-la si no\n"
-#~ "funciona exactament com voleu."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Ara podeu introduir la contrasenya de l'usuari 'root' del vostre\n"
-#~ "sistema Mandrake Linux. Ho heu de fer dos cops per verificar que\n"
-#~ "ambdues introduccions s�n id�ntiques.\n"
-#~ "\n"
-#~ "\n"
-#~ "L'usuari 'root' �s l'administrador del sistema, i �s l'�nic\n"
-#~ "autoritzat per modificar la configuraci� del sistema; per tant,\n"
-#~ "trieu amb molta cura aquesta contrasenya. L'�s no autoritzat del\n"
-#~ "compte 'root' pot ser extremadament perill�s per a la integritat\n"
-#~ "del sistema, per a les seves dades, i per a altres sistema que hi\n"
-#~ "estan connectats.\n"
-#~ "\n"
-#~ "\n"
-#~ "La contrasenya s'ha de crear amb diversos car�cters alfanum�rics, ha de\n"
-#~ "tenir una llargada m�nima de 8 car�cters, i mai no s'ha d'anotar enlloc.\n"
-#~ "\n"
-#~ "\n"
-#~ "No obstant aix�, no creeu una contrasenya excessivament llarga o\n"
-#~ "complicada: heu de poder recordar-la sense problemes."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Ara podeu crear un o m�s comptes \"normals\" d'usuari, en\n"
-#~ "contraposici� al compte \"privilegiat\", el 'root'. Podeu crear\n"
-#~ "un o m�s comptes per a cada una de les persones a qui permetreu\n"
-#~ "utilitzar l'ordinador. Tingueu en compte que cada compte d'usuari\n"
-#~ "tindr� les seves pr�pies prefer�ncies (entorn gr�fic, par�metres\n"
-#~ "del programa. etc.) i el seu propi \"directori inicial\", on\n"
-#~ "s'emmagatzemen aquestes prefer�ncies.\n"
-#~ "\n"
-#~ "\n"
-#~ "Primer de tot, creeu-vos un compte propi! Encara que sigueu l'�nic\n"
-#~ "usuari de l'ordinador, NO us connecteu com a 'root'\n"
-#~ "per a l'�s quotidi� del sistema: �s un risc de seguretat molt alt.\n"
-#~ "Tot sovint, fer el sistema inutilitzable dep�n d'un simple error\n"
-#~ "tipogr�fic.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per tant, connecteu-vos al sistema amb el compte d'usuari que heu\n"
-#~ "creat, i entreu-hi com a 'root' nom�s per a tasques d'administraci�\n"
-#~ "i manteniment."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "�s molt recomanable crear un disc d'arrencada. Si no podeu arrencar "
-#~ "l'ordinador,\n"
-#~ "�s l'�nica manera de solucionar-ho sense haver de reinstal�lar-ho tot."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Les opcions principals del LILO i del Grub s�n:\n"
-#~ "  - Dispositiu d'arrencada: Defineix el nom del dispositiu (p.\n"
-#~ "ex., una partici� del disc dur) que cont� el sector d'arrencada.\n"
-#~ "Tret que sapigueu expressament que s'ha d'indicar una altra cosa,\n"
-#~ "trieu \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Temps d'espera abans d'arrencar la imatge per defecte: Especifica el\n"
-#~ "temps, en d�cimes de segon, que el carregador d'arrencada ha\n"
-#~ "d'esperar abans de carregar la primera imatge.\n"
-#~ "Aix� �s �til en sistemes que arrenquen immediatament des del disc\n"
-#~ "dur despr�s d'habilitar el teclat. El carregador d'arrencada no\n"
-#~ "esperar� si s'omet el \"temps d'espera\" o si se li d�na el valor zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Mode de v�deo: Amb aix� s'especifica el mode de text VGA que\n"
-#~ "cal seleccionar en arrencar. Es poden utilitzar els valors\n"
-#~ "seg�ents:\n"
-#~ "    * normal: selecciona el mode de text 80x25 normal.\n"
-#~ "    * <n�mero>: utilitza el mode de text corresponent.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Neteja de \"/tmp\" en cada arrencada: si voleu suprimir tots els "
-#~ "fitxers i\n"
-#~ "directoris emmagatzemats a \"/tmp\" en arrencar el sistame, seleccioneu\n"
-#~ "aquesta opci�.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Si cal, indicaci� de la mida exacta de la RAM: malauradament, no hi "
-#~ "cap\n"
-#~ "m�tode est�ndard per preguntar al BIOS la quantitat de RAM que teniu a\n"
-#~ "l'ordinador. Per tant, �s possible que el Linux no pugui detectar\n"
-#~ "correctament la quantitat de RAM instal�lada. Si �s aquest el cas, en "
-#~ "podeu\n"
-#~ "indicar aqu� la quantitat correcta, per� penseu que una difer�ncia de 2 o "
-#~ "4\n"
-#~ "MB entre la mem�ria detectada i la mem�ria real �s normal."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "El SILO �s un carregador d'arrencada per a l'SPARC: pot arrencar el\n"
-#~ "GNU/Linux o qualsevol altre sistema operatiu que tingueu a l'ordinador.\n"
-#~ "Normalment, aquests altres sistemes operatius es detecten i instal�len\n"
-#~ "correctament, per� si no �s aix�, podeu afegir-los manualment en aquesta\n"
-#~ "pantalla. Aneu amb compte de triar els par�metres correctes.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tamb� �s possible que no volgueu donar acc�s a tothom a aquests sistemes\n"
-#~ "operatius; en aquest cas podeu suprimir les entrades corresponents, per�\n"
-#~ "aleshores us caldr� un disc d'arrencada per poder-los arrencar!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Les opcions principals del SILO s�n:\n"
-#~ "  - Instal�laci� del carregador d'arrencada: indica on voleu situar la\n"
-#~ "informaci� necess�ria per arrencar el GNU/Linux. Tret que sapigueu\n"
-#~ "exactament qu� esteu fent, seleccioneu \"Primer sector de la unitat\n"
-#~ "(MBR)\".\n"
-#~ " \n"
-#~ "\n"
-#~ "  - Temps d'espera abans d'arrencar la imatge per defecte: Especifica el\n"
-#~ "temps, en d�cimes de segon, que el carregador d'arrencada ha\n"
-#~ "d'esperar abans de carregar la primera imatge.\n"
-#~ "Aix� �s �til en sistemes que arrenquen immediatament des del disc\n"
-#~ "dur despr�s d'habilitar el teclat. El carregador d'arrencada no\n"
-#~ "esperar� si s'omet el \"temps d'espera\" o si se li d�na el valor zero."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Ara cal configurar el sistema X Window, que �s el nucli del GUI\n"
-#~ "(Interf�cie gr�fica d'usuari) del GNU/Linux. Per a aix�, heu de\n"
-#~ "configurar la vostra targeta gr�fica i el monitor. No obstant\n"
-#~ "aix�, la majoria d'aquests passos estan automatitzats, aix� que pot\n"
-#~ "ser que la vostra feina es limiti a verificar qu� s'ha fet i a\n"
-#~ "acceptar els par�metres :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Quan la configuraci� hagi acabat s'iniciar� X (tret que demaneu al\n"
-#~ "Drakx que no ho faci), i podreu verificar si els par�metres us\n"
-#~ "convenen. Si no, podreu tornar enrere i canviar-los tantes vegades\n"
-#~ "com calgui."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Si hi ha algun problema a la configuraci� X, utilitzeu aquestes opcions\n"
-#~ "per configurar correctament l'X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Si preferiu utilitzar una entrada gr�fica, seleccioneu \"S�\". En cas\n"
-#~ "contrari, seleccioneu \"No\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Podeu triar un nivell de seguretat per al vostre sistema. Si us plau,\n"
-#~ "consulteu el manual per obtenir informaci� completa. B�sicament, si no\n"
-#~ "sabeu qu� triar, conserveu l'opci� per defecte.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Ara, el sistema es tornar� a arrencar.\n"
-#~ "\n"
-#~ "Despr�s d'aix�, el sistema Mandrake Linux es carregar�\n"
-#~ "autom�ticament. Si voleu arrencar un altre sistema operatiu existent,\n"
-#~ "llegiu les instruccions addicionals."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Txec (Programadors)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Eslovac (Programadors)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Nom del perfil a crear:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Escriu a /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formata-ho tot"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Despr�s de formatar totes les particions,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "totes les dades d'aquestes particions s'hauran perdut"
-
-#~ msgid "Reload"
-#~ msgstr "Torna a carregar"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Voleu generar un disquet d'instal�laci� autom�tica per fer c�pies del "
-#~ "Linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Configuraci� de l'ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Amb un servidor CUPS remot, aqu� no us cal configurar cap\n"
-#~ "impressora; les impressores es detectaran autom�ticament,\n"
-#~ "tret que tingueu un servidor en una altra xarxa; en aquest\n"
-#~ "cas, heu d'indicar l'adre�a IP, i opcionalment el n�mero de\n"
-#~ "port, al servidor CUPS."
-
-#~ msgid "Remote queue"
-#~ msgstr "Cua remota"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Cua remota"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Nom de domini"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Cap impressora"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Monitoritzaci� de la xarxa"
-
-#~ msgid "Profile "
-#~ msgstr "Perfil "
-
-#~ msgid "Statistics"
-#~ msgstr "Estad�stiques"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "S'est� enviant la velocitat: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "S'est� rebent la velocitat: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Tipus de connexi�: "
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "S'est� establint la connexi� a Internet"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "S'est� realitzant la desconnexi� d'Internet"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "No s'ha pogut realitzar la desconnexi� d'Internet"
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "La desconnexi� d'Internet ha finalitzat"
-
-#~ msgid "Connection complete."
-#~ msgstr "La connexi� ha finalitzat."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "No s'ha pogut establir la connexi�.\n"
-#~ "Comproveu la configuraci� al Centre de control de Mandrake."
-
-#~ msgid "sent: "
-#~ msgstr "enviat: "
-
-#~ msgid "received: "
-#~ msgstr "rebut: "
-
-#, fuzzy
-#~ msgid "average"
-#~ msgstr "escombraries"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Predeterminat"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "No s'ha pogut interpretar el contingut del fitxer de configuraci�."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Fitxer de configuraci� no reconegut"
-
-#~ msgid "Adapter"
-#~ msgstr "Adaptador"
-
-#~ msgid "Disable network"
-#~ msgstr "Inhabilita el sistema de xarxa"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Inhabilita el sistema de xarxa"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Ara podeu provar el ratol�. Utilitzeu els botons i la bola per comprovar "
-#~ "que\n"
-#~ "els par�metres s�n correctes; si no ho s�n, feu clic a \"Cancel�la\" per\n"
-#~ "seleccionar un altre controlador."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Connexi� per DSL (o ADSL)"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Tanca"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Podeu indicar directament l'URI per accedir a la impressora amb CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "S�, imprimeix una p�gina ASCII de prova"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "S�, imprimeix una p�gina PostScript de prova"
-
-#~ msgid "Paper Size"
-#~ msgstr "Mida del paper"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Voleu expulsar la p�gina despr�s de la tasca?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opcions del programa de control Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opcions de profunditat del color"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Voleu imprimir el text com a PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Voleu ajustar el text 'stair-stepping'?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Nombre de p�gines per p�gines de sortida"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Marges dret/esquerra en punts (1/72 de polzada)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Marges superior/inferior en punts (1/72 de polzada)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "opcions addicionals del GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Opcions addicionals per al text"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inverteix l'ordre de les p�gines"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Seleccioneu la connexi� de la impressora remota"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Cada impressora necessita un nom (p.ex. lp).\n"
-#~ "Es poden definir altres par�metres, com ara la descripci� de la "
-#~ "impressora\n"
-#~ "o la seva ubicaci�. Quin nom cal utilitzar per a aquesta impressora, i "
-#~ "com\n"
-#~ "est� connectada?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Cada cua d'impressi� (a qu� s'adrecen les tasques d'impressi�) necessita\n"
-#~ "un nom (sovint lp) i un directori d'spool associada amb ell. Quin nom i\n"
-#~ "directori cal utilitzar per a aquesta cua, i com est� connectada la "
-#~ "impressora?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nom de la cua"
-
-#~ msgid "Spool directory"
-#~ msgstr "Directori d'spool"
-
-#~ msgid "Disable"
-#~ msgstr "Inhabilita"
-
-#~ msgid "Enable"
-#~ msgstr "Habilita"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Per habilitar un sistema m�s segur, seleccioneu \"Utilitza el\n"
-#~ "fitxer d'ombra\" i \"Utilitza les contrasenyes MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Si la vostra xarxa utilitza NIS, seleccioneu \"Utilitza NIS\". Si no ho\n"
-#~ "sabeu, consulteu a l'administrador de la xarxa."
-
-#~ msgid "yellow pages"
-#~ msgstr "p�gines grogues"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Configuraci� de la LAN"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 del prove�dor"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 del prove�dor"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Com us voleu connectar a Internet?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "no es pot bifurcar: "
-
-#~ msgid "Configure..."
-#~ msgstr "Configura..."
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "S'ha seleccionat la mida %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "S'est� obrint la connexi�..."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Aquest script d'inici intenta carregar els m�duls del ratol� USB."
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Configuraci� del LILO/Grub"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Configuraci� del tipus d'arrencada"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Ara que ja teniu configurada la connexi� a Internet,\n"
-#~ "podeu configurar l'ordinador per tal que la comparteixi.\n"
-#~ "Nota: per configurar una xarxa d'�rea local (LAN), us cal un adaptador de "
-#~ "xarxa dedicat.\n"
-#~ "\n"
-#~ "Voleu configurar la connexi� a Internet compartida?\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "Benvingut a la utilitat de compartici� de la connexi� a Internet!"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Depend�ncies autom�tiques"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Configura el LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Crea un disquet d'arrencada"
-
-#~ msgid "Choice"
-#~ msgstr "Elecci�"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "aurora horitzontal amb bon aspecte"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "aurora vertical tradicional"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Ara podeu seleccionar diverses opcions per al vostre sistema.\n"
-#~ "\n"
-#~ "* Utilitzaci� de l'optimitzaci� del disc dur: Aquesta opci� pot millorar "
-#~ "el\n"
-#~ "rendiment del disc dur, per� �s nom�s per a usuaris avan�ats. Alguns "
-#~ "xips\n"
-#~ "amb errors poden fer malb� les vostres dades, aix� que aneu amb compte. "
-#~ "El\n"
-#~ "nucli inclou una \"llista negra\" d'unitats i jocs de xips, per�, si "
-#~ "voleu\n"
-#~ "evitar-vos sorpreses desagradables, no activeu aquesta opci�.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Selecci� d'un nivell de seguretat: Podeu escollir un nivell de\n"
-#~ "seguretat per al sistema. Si us plau, consulteu el manual per a m�s\n"
-#~ "informaci�. B�sicament, si no n'esteu segur, trieu l'opci� "
-#~ "predeterminada.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Si cal, indicaci� de la mida exacta de la RAM: malauradament, no hi "
-#~ "cap\n"
-#~ "m�tode est�ndard per preguntar al BIOS la quantitat de RAM que hi ha a\n"
-#~ "l'ordinador. Per tant, �s possible que el Linux no pugui detectar\n"
-#~ "correctament la quantitat de RAM instal�lada. Si �s aquest el cas, en "
-#~ "podeu\n"
-#~ "indicar aqu� la quantitat correcta, per� penseu que una difer�ncia de 2 o "
-#~ "4\n"
-#~ "MB entre la mem�ria detectada i la mem�ria real �s normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Muntatge autom�tic de suports extra�bles: Si preferiu no haver\n"
-#~ "de muntar manualment les unitats extra�bles (CD-ROM, disquet, Zip)\n"
-#~ "escrivint \"mount\" i \"umount\", seleccioneu aquesta opci�.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Neteja de \"/tmp\" en cada arrencada: si voleu suprimir tots els "
-#~ "fitxers\n"
-#~ "i directoris que hi ha emmagatzemats a \"/tmp\" quan arranqueu el "
-#~ "sistema,\n"
-#~ "seleccioneu aquesta opci�.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Habilitaci� de BlocNum a l'inici: Si voleu que BlocNum s'habiliti "
-#~ "despr�s\n"
-#~ "de l'arrencada, seleccioneu aquesta opci�. Tingueu en compte que no heu\n"
-#~ "d'habilitar aquesta opci� en port�tils i que BlocNum pot funcionar o pot "
-#~ "no\n"
-#~ "funcionar sota X."
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Si us plau, tingueu paci�ncia; la configuraci� del correu encara no est� "
-#~ "implementada."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Benvingut a l'Auxiliar de configuraci� de la xarxa.\n"
-#~ "Quins components voleu configurar?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Acc�s a Internet/xarxa"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Miscel�l�nia"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Preguntes diverses"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "No es pot utilitzar supermount en un nivell d'alta seguretat"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Atenci�: EN AQUEST NIVELL DE SEGURETAT NO ES POT ENTRAR COM A ROOT A LA "
-#~ "CONSOLA!\n"
-#~ "Si voleu ser root, heu d'entrar com a usuari i aleshores utilitzar \"su"
-#~ "\".\n"
-#~ "En general, no espereu utilitzar l'ordinador per a altre cosa que com a "
-#~ "servidor.\n"
-#~ "Esteu avisat."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Aneu amb compte; si teniu BlocN�m habilitat, moltes tecles donaran\n"
-#~ "n�meros en comptes de lletres (p.ex., si premeu la `p' obtindreu un `6')"
-
-#~ msgid "not connected"
-#~ msgstr "sense connexi�"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Aplicacions cient�fiques"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Servidor, Fitxer/Impressi�/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Servidor, DNS/DHCP "
-
-#~ msgid "First DNS Server"
-#~ msgstr "Servidor DNS primari"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Servidor DNS secundari"
-
-#~ msgid "using module"
-#~ msgstr "s'est� utilitzant el m�dul"
-
-#~ msgid "Development, Database"
-#~ msgstr "Desenvolupament, base de dades"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Desenvolupament, entorn integrat"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Desenvolupament, eines est�ndard"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Av�s:\n"
-#~ "Si apliquu els canvis durant l'execuci�, �s possible que l'entorn X "
-#~ "caigui."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Si continueu, tancar� l'entorn %s"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Quin(s) carregador(s) d'arrencada voleu utilitzar?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Disquet d'instal�laci� autom�tica"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Voleu que intenti trobar un m�dem?"
-
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "Configura una connexi� per XDSI"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Inhabilita la connexi� a Internet"
-
-#~ msgid "Configure local network"
-#~ msgstr "Configura la xarxa local"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Configura la connexi� a Internet / Configura la xarxa local"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "La xarxa local ja s'ha configurat.\n"
-#~ "Voleu:"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Manipulaci� de gr�fics"
-
-#~ msgid "Sciences"
-#~ msgstr "Ci�ncies"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Programes de xat (IRC o missatgeria instant�nia) com ara xchat, licq, "
-#~ "gaim, i eines de transfer�ncia de fitxers"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Instal�lacions de comunicaci�"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Eines d'Internet"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Clients de bases de dades i servidors (mysql i postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Desenvolupament C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Zona hor�ria"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(pot malmetre les dades)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Habilita la tecla Bloc Num en iniciar"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Confirmeu la contrasenya"
-
-#~ msgid "default"
-#~ msgstr "predeterminat"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Amb quina finalitat utilitzeu el sistema?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Seleccioneu la mida que voleu instal�lar"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Utilitza el diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Personalitzada"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Esteu segur que sou un expert? \n"
-#~ "Aqu� podreu fer coses molt potents, per� tamb� perilloses.\n"
-#~ "\n"
-#~ "Us preguntaran coses com: ``Voleu utilitzar un fitxer d'ombres per a les "
-#~ "contrasenyes?'',\n"
-#~ "Sou capa� de respondre aquest tipus de preguntes?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Utilitza el fitxer d'ombra"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Utilitza les contrasenyes MD5"
-
-#~ msgid "Search"
-#~ msgstr "Cerca"
-
-#~ msgid "Package"
-#~ msgstr "Paquet"
-
-#~ msgid "Tree"
-#~ msgstr "Arbre"
-
-#~ msgid "Sort by"
-#~ msgstr "Ordena per"
-
-#~ msgid "Category"
-#~ msgstr "Categoria"
-
-#~ msgid "Installed packages"
-#~ msgstr "Paquets instal�lats"
-
-#~ msgid "Available packages"
-#~ msgstr "Paquets disponibles"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Mostra nom�s les fulles"
-
-#~ msgid "Expand all"
-#~ msgstr "Expandeix-ho tot"
-
-#~ msgid "Collapse all"
-#~ msgstr "Redueix-ho tot"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Afegeix la ubicaci� dels paquets"
-
-#~ msgid "Update location"
-#~ msgstr "Actualitza la ubicaci�"
-
-#~ msgid "Find Package"
-#~ msgstr "Cerca el paquet"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Cerca el paquet que cont� el fitxer"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Commuta entre Instal�lats i Disponibles"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "S'estan comprovant les depend�ncies"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Ara es desinstal�laran els paquets seg�ents"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Quin paquet esteu cercant"
-
-#~ msgid "No match"
-#~ msgstr "Cap coincid�ncia"
-
-#~ msgid "No more match"
-#~ msgstr "Cap altra coincid�ncia"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "Actualment, l'rpmdrake est� en el mode ``poca mem�ria''.\n"
-#~ "Ara tornar� a reiniciar l'rpmdrake per permetre la recerca de fitxers"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Quin fitxer esteu cercant?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Qu� esteu cercant?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Introdu�u un nom (p.ex. `extra', `comercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Directori"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "No hi ha cap CD-ROM disponible (no hi ha res a /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "L'URL del directori que cont� els RPM"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Per a FTP i HTTP, us cal introduir la ubicaci� de hdlist\n"
-#~ "Ha de ser relativa a l'URL superior"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Si us plau, trameteu la informaci� seg�ent"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s ja �s en �s"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "S'est� actualitzant la base dels RPM"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Ara s'eliminar� l'entrada %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "S'estan cercant les fulles"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Cal una mica de temps per cercar les fulles"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "He trobat una targeta XDSI:\n"
-
-#~ msgid "Other countries"
-#~ msgstr "Altres pa�sos"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "A quin pa�s us trobeu?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "M�dem Alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "M�dem ECI"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Si el vostre m�dem adsl �s un m�dem Alcatel, seleccioneu Alcatel. Si no, "
-#~ "ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "no utilitzis pppoe"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (important)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (molt bonic)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (bonic)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "A quin port s�rie est� connectat el vostre ratol�?"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, biblioteques, eines"
-
-#~ msgid "Czech"
-#~ msgstr "Txec"
-
-#~ msgid "Slovakian"
-#~ msgstr "Eslovac"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "No s'ha pogut instal�lar el RPM d'ipchains amb l'urpmi."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "No s'ha pogut instal�lar el RPM de dhcp amb l'urpmi."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "No s'ha pogut instal�lar el RPM de linuxconf amb l'urpmi."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "No s'ha pogut instal�lar el RPM de bind amb l'urpmi."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "No s'ha pogut instal�lar el RPM de caching-nameserver amb l'urpmi"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Torna a configurar la xarxa local"
-
-#~ msgid ""
-#~ " Introduction\n"
-#~ "\n"
-#~ "The operating system and the different components available in the "
-#~ "Mandrake Linux distribution \n"
-#~ "shall be called the \"Software Products\" hereafter. The Software "
-#~ "Products include, but are not \n"
-#~ "restricted to, the set of programs, methods, rules and documentation "
-#~ "related to the operating \n"
-#~ "system and the different components of the Mandrake Linux distribution.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. License Agreement\n"
-#~ "\n"
-#~ "Please read carefully this document. This document is a license agreement "
-#~ "between you and  \n"
-#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 Paris - France, which applies "
-#~ "to the Software Products.\n"
-#~ "By installing, duplicating or using the Software Products in any manner, "
-#~ "you explicitly \n"
-#~ "accept and fully agree to conform to the terms and conditions of this "
-#~ "License. \n"
-#~ "If you disagree with any portion of the License, you are not allowed to "
-#~ "install, duplicate or use \n"
-#~ "the Software Products. \n"
-#~ "Any attempt to install, duplicate or use the Software Products in a "
-#~ "manner which does not comply \n"
-#~ "with the terms and conditions of this License is void and will terminate "
-#~ "your rights under this \n"
-#~ "License. Upon termination of the License,  you must immediately destroy "
-#~ "all copies of the \n"
-#~ "Software Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. The GPL License and Related Licenses\n"
-#~ "\n"
-#~ "The Software Products consist of components created by different persons "
-#~ "or entities.  Most \n"
-#~ "of these components are governed under the terms and conditions of the "
-#~ "GNU General Public \n"
-#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-#~ "licenses allow you to use, \n"
-#~ "duplicate, adapt or redistribute the components which they cover. Please "
-#~ "read carefully the terms \n"
-#~ "and conditions of the license agreement for each component before using "
-#~ "any component. Any question \n"
-#~ "on a component license should be addressed to the component author and "
-#~ "not to MandrakeSoft.\n"
-#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL "
-#~ "License. Documentation written \n"
-#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to "
-#~ "the documentation for \n"
-#~ "further details.\n"
-#~ "Some versions of the Software Products may contain components which are "
-#~ "not governed by the GPL \n"
-#~ "License or similar agreements. Each such component is then governed by "
-#~ "the terms and conditions \n"
-#~ "of its own specific license. Please read carefully and comply with such "
-#~ "specific licenses before \n"
-#~ "you install, use or redistribute the said components. Such licenses will "
-#~ "in general prevent the \n"
-#~ "transfer,  duplication (except for backup purposes), redistribution, "
-#~ "reverse engineering, \n"
-#~ "de-assembly, \n"
-#~ "de-compilation or modification of the component. Any breach of agreement "
-#~ "will immediately terminate \n"
-#~ "your rights under the specific license. Unless the specific license terms "
-#~ "grant you such rights, \n"
-#~ "you usually cannot install the programs on more than one system, or adapt "
-#~ "it to be used on a \n"
-#~ "network. \n"
-#~ "In doubt, please contact directly the distributor or editor of the "
-#~ "component. Transfer to third \n"
-#~ "parties or copying of such components including the documentation is "
-#~ "usually forbidden.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Intellectual Property Rights\n"
-#~ "\n"
-#~ "All rights to the components of the Software Products belong to their "
-#~ "respective authors and are \n"
-#~ "protected by intellectual property and copyright laws applicable to "
-#~ "software programs.\n"
-#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-#~ "Products, as a whole or in \n"
-#~ "parts,\n"
-#~ "by all means and for all purposes.\n"
-#~ "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-#~ "MandrakeSoft S.A.  All rights \n"
-#~ "are \n"
-#~ "reserved. The duplication is forbidden without prior written consent by "
-#~ "MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Limited Warranty\n"
-#~ "\n"
-#~ "The Software Products and attached documentation are provided \"as is\", "
-#~ "with no warranty, to the \n"
-#~ "extent permitted by law. Should the Software Products be defective, "
-#~ "MandrakeSoft S.A. will at its \n"
-#~ "own will either replace the Software Products, or reimburse the paid "
-#~ "fee.\n"
-#~ "This limited warranty is void if you fail to comply to the "
-#~ "recommendations, instructions and \n"
-#~ "conditions \n"
-#~ "of use listed in the documentation or license agreements of the Software "
-#~ "Products.\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. will in no "
-#~ "circumstances be liable for any \n"
-#~ "special, \n"
-#~ "incidental, direct or indirect damages whatsoever (including without "
-#~ "limitation damages for loss of \n"
-#~ "business, interruption of business, financial loss, legal fees and "
-#~ "penalties resulting from a court \n"
-#~ "judgement, or any other consequential loss) arising out of  the use or "
-#~ "inability to use the \n"
-#~ "Software \n"
-#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility "
-#~ "or occurance of such \n"
-#~ "damages.\n"
-#~ "\n"
-#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN "
-#~ "SOME COUNTRIES\n"
-#~ "\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors "
-#~ "will, in no circumstances, be \n"
-#~ "liable for any special, incidental, direct or indirect damages whatsoever "
-#~ "(including without \n"
-#~ "limitation \n"
-#~ "damages for loss of business, interruption of business, financial loss, "
-#~ "legal fees and penalties \n"
-#~ "resulting from a court judgement, or any other consequential loss) "
-#~ "arising out of the possession \n"
-#~ "and \n"
-#~ "use of software components or arising out of  downloading software "
-#~ "components from one of \n"
-#~ "Mandrake Linux \n"
-#~ "sites  which are prohibited or restricted in some countries by local "
-#~ "laws. This limited liability \n"
-#~ "applies to, but is not restricted to, the strong cryptography components "
-#~ "included in the Software \n"
-#~ "Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Governing Laws \n"
-#~ "\n"
-#~ "If any portion of this agreement is held void, illegal or inapplicable by "
-#~ "a court judgement, this \n"
-#~ "portion is excluded from this contract. You remain bound by the other "
-#~ "applicable sections of the \n"
-#~ "agreement.\n"
-#~ "The terms and conditions of this License are governed by the Laws of "
-#~ "France.\n"
-#~ "All disputes on the terms of this license will preferably be settled out "
-#~ "of court. As a last \n"
-#~ "resort, \n"
-#~ "the dispute will be referred to the appropriate Courts of Law of Paris - "
-#~ "France.\n"
-#~ "For any question on this document, please contact MandrakeSoft S.A.,  \n"
-#~ "43, rue d'Aboukir, 75002 Paris - France\n"
-#~ msgstr ""
-#~ " Introducci�\n"
-#~ "\n"
-#~ "D'ara endavant, el sistema operatiu i els diferents components que "
-#~ "s'inclouen\n"
-#~ "a la distribuci� Mandrake Linux s'anomenaran els \"Productes de programari"
-#~ "\".\n"
-#~ "Els Productes de programari inclouen, per� no es limiten a, el conjunt "
-#~ "de\n"
-#~ "programes, m�todes, regles i documentaci� relativa al sistema operatiu i "
-#~ "als\n"
-#~ "diferents components de la distribuci� Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. Acord de Llic�ncia\n"
-#~ "\n"
-#~ "Si us plau, llegiu aquest document atentament. Aquest document �s un "
-#~ "acord\n"
-#~ "de llic�ncia entre v�s i MandrakeSoft S.A., 43, rue d'Aboukir, 75002 "
-#~ "Par�s,\n"
-#~ "Fran�a, que s'aplica als Productes de programari.\n"
-#~ "Pel fet d'instal�lar, duplicar o utilitzar els Productes de programari, "
-#~ "en \n"
-#~ "qualsevol manera, accepteu i esteu totalment d'acord, de manera "
-#~ "expl�cita, en\n"
-#~ "sometre-us als termes i condicions d'aquesta Llic�ncia. Si no esteu "
-#~ "d'acord amb\n"
-#~ "qualsevol part d'aquesta Llic�ncia, no esteu autoritzat a instal�lar, "
-#~ "duplicar\n"
-#~ "ni utilitzar els Productes de programari. Qualsevol intent d'instal�lar,\n"
-#~ "duplicar o utilitzar els Productes de programari d'una manera no conforme "
-#~ "als\n"
-#~ "termes i condicions d'aquesta Llic�ncia �s inv�lid i conclour� els "
-#~ "vostres\n"
-#~ "drets sota aquesta Llic�ncia. En concloure la Llic�ncia, heu de destruir\n"
-#~ "immediatament totes les c�pies dels Productes de programari.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. la Llic�ncia GPL i Llic�ncies relacionades\n"
-#~ "\n"
-#~ "Els Productes de programari s�n components creats per diferents persones "
-#~ "o\n"
-#~ "entitats. La majoria d'aquests components estan coberts pels termes i\n"
-#~ "condicions de la Llic�ncia General P�blica de GNU (d'ara endavant \"GPL"
-#~ "\"), o\n"
-#~ "de llic�ncies similars. La majoria d'aquestes llic�ncies us permeten "
-#~ "utilitzar,\n"
-#~ "duplicar, adaptar o redistribuir els components que cobreixen. Si us "
-#~ "plau,\n"
-#~ "llegiu atentament els termes i condicions de l'acord de llic�ncia de "
-#~ "cada\n"
-#~ "component abans d'utilitzar-lo. Qualsevol pregunta sobre un component "
-#~ "s'ha\n"
-#~ "d'adre�ar al seu autor i no a MandrakeSoft. Els programes desenvolupats "
-#~ "per\n"
-#~ "MandrakeSoft S.A. estan coberts per la Llic�ncia GPL. La documentaci� "
-#~ "escrita\n"
-#~ "per MandrakeSoft S.A. est� coberta per una llic�ncia espec�fica. Si us "
-#~ "plau,\n"
-#~ "consulteu la documentaci� per a m�s informaci�. Algunes versions dels "
-#~ "Productes\n"
-#~ "de programari poden incloure components que no estiguin coberts per la\n"
-#~ "Llic�ncia GPL o llic�ncies similars; en aquest cas, cada un d'aquests\n"
-#~ "components estar� cobert pels termes i condicions de la seva pr�pia "
-#~ "llic�ncia\n"
-#~ "espec�fica. Si us plau, llegiu atentament i respecteu aquestes "
-#~ "llic�ncies\n"
-#~ "espec�fiques abans d'instal�lar, utilitzar o redistribuir els components\n"
-#~ "esmentats. En general, aquestes llic�ncies impediran la transfer�ncia,\n"
-#~ "duplicaci� (excepte amb la finalitat de fer c�pies de seguretat),\n"
-#~ "redistribuci�, enginyeria inversa, desensamblatge, decompilaci� o "
-#~ "modificaci�\n"
-#~ "del component. Qualsevol ruptura de l'acord conclour� immediatament els "
-#~ "vostres\n"
-#~ "drets sota la llic�ncia espec�fica. Tret que els termes de la llic�ncia\n"
-#~ "espec�fica us ho autoritzin, normalment no podreu instal�lar els "
-#~ "programes en\n"
-#~ "m�s d'un sistema ni adaptar-lo per al seu �s en xarxa. Si hi teniu "
-#~ "dubtes,\n"
-#~ "poseu-vos en contacte directament amb el distribu�dor o editor del "
-#~ "component.\n"
-#~ "Normalment, est� prohibida la transfer�ncia a terceres parts i la c�pia\n"
-#~ "d'aquests components, incloent la documentaci�.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Drets de propietat intel�lectual\n"
-#~ "\n"
-#~ "Tots els drets dels components dels Productes de programari pertanyen als "
-#~ "seus\n"
-#~ "autors respectius i estan protegits per la propietat intel�lectual i les "
-#~ "lleis\n"
-#~ "de copyright aplicables al programari. MandrakeSoft S.A. es reserva els "
-#~ "drets\n"
-#~ "de modificar o adaptar els Productes de programari, ja sigui parcialment "
-#~ "o\n"
-#~ "totalment, per tots els mitjans i per a totes les finalitats. \"Mandrake"
-#~ "\",\n"
-#~ "\"Mandrake Linux\" i els logotips associats son marques registrades de\n"
-#~ "MandrakeSoft S.A.  Tots els drets reservats. Es prohibeix la duplicaci� "
-#~ "sense\n"
-#~ "consentiment previ per escrit de MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Garantia limitada\n"
-#~ "\n"
-#~ "Els Productes de programari i la documentaci� que s'hi adjunta es "
-#~ "subministren\n"
-#~ "\"tal com s�n\", sense cap garantia, fins al punt perm�s per la llei. En "
-#~ "cas\n"
-#~ "que els Productes de programari siguin defectuosos, MandrakeSoft S.A., a\n"
-#~ "criteri seu, decidir� si reempla�a els Productes de programari o si en\n"
-#~ "reemborsa el preu pagat. Aquesta garantia limitada �s nul�la si no "
-#~ "compliu les\n"
-#~ "recomanacions, instruccions i condicions d'�s que s'indiquen a la "
-#~ "documentaci�\n"
-#~ "o als acords de llic�ncia dels Productes de programari. Fins al punt "
-#~ "perm�s per\n"
-#~ "la llei, MandrakeSoft S.A. no ser�, en cap circumst�ncia, responsable de "
-#~ "cap\n"
-#~ "dany especial, incidental, directe o indirecte (incloent, per� sense "
-#~ "limitar-se\n"
-#~ "a, danys per p�rdua de negocis, interrupci� de negocis, p�rdues "
-#~ "financeres,\n"
-#~ "honoraris i multes legals que resultin per un judici i qualsevol altre "
-#~ "p�rdua\n"
-#~ "important) que resulti de l'�s o impossibilitat d'utilitzar els Productes "
-#~ "de\n"
-#~ "programari, fins i tot si s'ha notificat a MandrakeSoft S.A. la "
-#~ "possibilitat de\n"
-#~ "que es produeixin aquests danys.\n"
-#~ "\n"
-#~ "RESPONSABILITAT LIMITADA LLIGADA A LA POSESSI� O UTILITZACI� DE "
-#~ "PROGRAMARI PROHIBIT EN ALGUNES PA�SOS\n"
-#~ "\n"
-#~ "Fins al put perm�s per la llei, MandrakeSoft S.A. i els seus "
-#~ "distribu�dors no\n"
-#~ "seran, sota cap circumst�ncia, responsables de cap dany especial, "
-#~ "incidental,\n"
-#~ "directe o indirecte (incloent, per� sense limitar-se a, danys per p�rdua "
-#~ "de\n"
-#~ "negocis, interrupci� de negocis, p�rdues financeres, honoraris i multes "
-#~ "legals\n"
-#~ "que resultin per un judici i qualsevol altre p�rdua important) que "
-#~ "resultin de\n"
-#~ "la possessi� i �s de components de programari o de la desc�rrega de "
-#~ "components\n"
-#~ "de programari d'algun dels llocs web de Mandrake Linux que estiguin "
-#~ "prohibits o\n"
-#~ "restringits en alguns pa�sos per lleis locals. Aquesta responsabilitat "
-#~ "limitada\n"
-#~ "s'aplica, per� no est� restringida a, els potents components de "
-#~ "criptografia\n"
-#~ "inclosos en els Productes de programari.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Lleis aplicables \n"
-#~ "\n"
-#~ "Si qualsevol part d'aquest acord �s declarat nul, il�legal o inaplicable "
-#~ "en un\n"
-#~ "judici, aquesta part s'exclou del contracte, per� seguiu obligat per les "
-#~ "altres\n"
-#~ "seccions aplicables de l'acord. Els termes i condicions d'aquesta "
-#~ "Llic�ncia\n"
-#~ "estan coberts per les lleis de Fran�a. Preferiblement, tots els desacords "
-#~ "sobre\n"
-#~ "els termes d'aquesta Llic�ncia es resoldran fora dels tribunals. Com a "
-#~ "�ltim\n"
-#~ "recurs, el plet es dirimir� en els tribunals de Par�s, Fran�a.\n"
-#~ "Per a qualsevol pregunta sobre aquest document, poseu-vos en contacte "
-#~ "amb\n"
-#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 Par�s, Fran�a.\n"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Es pot configurar el vostre ordinador per tal que comparteixi la connexi� "
-#~ "a Internet.\n"
-#~ "\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "S'ha configurat tot.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Connecta't a Internet amb un m�dem normal"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Connecta't a Internet mitjan�ant XDSI"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Connecta't a Internet mitjan�ant DSL (o ADSL)"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Connecta't a Internet mitjan�ant cable"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "Temps (en segons) d'inactivitat despr�s del qual\n"
-#~ "penjar� (deixeu-ho en blanc per inhabilitar-ho)."
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Alemanya (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Qu� voleu fer?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Instal�la/Rescata"
-
-#~ msgid "Rescue"
-#~ msgstr "Rescata"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Quin tipus de partici� voleu?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Escolliu \"Instal�laci�\" si no hi ha instal�lada cap versi� anterior de "
-#~ "GNU/Linux,\n"
-#~ "o si voleu utilitzar diverses distribucions o versions.\n"
-#~ "\n"
-#~ "Escolliu \"Rescat\" si voleu rescatar una versi� anterior de\n"
-#~ "Mandrake Linux ja instal�lada.\n"
-#~ "\n"
-#~ "\n"
-#~ "Seleccioneu:\n"
-#~ "\n"
-#~ "  - Recomanada: Si mai no heu instal�lat el GNU/Linux,\n"
-#~ "    escolliu aquesta opci�.\n"
-#~ "  - Personalitzada: Si esteu prou familiaritzat amb el GNU/Linux, podeu\n"
-#~ "    triar l'�s principal del vostre ordinador. Consulteu-ne els detalls\n"
-#~ "    m�s avall.\n"
-#~ "\n"
-#~ "  - Per a experts: S'assumeix que domineu el GNU/Linux i voleu realitzar "
-#~ "una\n"
-#~ "    instal�laci� altament personalitzada. Com en el cas del tipus\n"
-#~ "    d'instal�laci� \"Personalitzada\", podreu seleccionar l'�s del "
-#~ "vostre\n"
-#~ "    sistema.\n"
-#~ "    Per�, si us plau, sobretot NO TRIEU AQUESTA OPCI� TRET QUE SAPIGUEU "
-#~ "QU� ESTEU FENT!\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "En aquest moment podeu decidir quina(es) partici�(ns) voleu utilitzar\n"
-#~ "per instal�lar el sistema Mandrake Linux, si �s que ja es va(n)\n"
-#~ "definir (en una instal�laci� anterior del GNU/Linux o mitjan�ant una\n"
-#~ "altra eina de partici�). En altres casos, s'han de definir les\n"
-#~ "particions del disc dur: aquesta operaci� consisteix en dividir el\n"
-#~ "disc dur de l'ordinador en �rees l�giques separades.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si heu de crear noves particions, utilitzeu \"Assignaci�\n"
-#~ "autom�tica\" per crear particions per al GNU/Linux de manera autom�tica.\n"
-#~ "Podeu triar el disc on s'hi han de fer les particions fent clic a\n"
-#~ "\"hda\" per a la primera unitat IDE, \"hdb\" per a la segona, o\n"
-#~ "\"sda\" per a la primera unitat SCSI, i aix� successivament.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dues particions habituals s�n: la partici� root (/), que �s el punt\n"
-#~ "d'inici de la jerarquia de directoris del sistema de fitxers, i\n"
-#~ "/boot, que cont� tots els fitxers necessaris per iniciar el sistema\n"
-#~ "operatiu quan s'arrenca l'ordinador per primer cop.\n"
-#~ "\n"
-#~ "\n"
-#~ "Donat que aquest proc�s sol ser irreversible, la partici� d'un disc\n"
-#~ "�s sovint un proc�s que espanta als usuaris sense experi�ncia, per�\n"
-#~ "el DiskDrake simplifica molt aquest proc�s. Consulteu la documentaci�\n"
-#~ "i preneu-vos tant temps com sigui necessari abans de realitzar la\n"
-#~ "partici�.\n"
-#~ "\n"
-#~ "Podeu accedir a qualsevol opci� mitjan�ant el teclat: desplaceu-vos per "
-#~ "les particions amb el tabulador i les fletxes amunt i avall. Quan se "
-#~ "selecciona una partici�, podeu utilitzar:\n"
-#~ "\n"
-#~ "- Ctrl-c  per crear una nova partici� (quan se selecciona una partici� "
-#~ "buida)\n"
-#~ "\n"
-#~ "- Ctrl-d  per suprimir una partici�\n"
-#~ "\n"
-#~ "- Ctrl-m  per definir el punt de muntatge\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Cal formatar les particions que s'acaben de definir per poder-les\n"
-#~ "utilitzar ('formatar' significa 'crear un sistema de fitxers').\n"
-#~ "En aquest punt podeu, si voleu, tornar a formatar particions\n"
-#~ "existents per eliminar les dades que contenen. Nota: no �s\n"
-#~ "necessari tornar a formatar les particions existents, especialment\n"
-#~ "si contenen fitxers o dades que voleu conservar.\n"
-#~ "Els directoris que es solen conservar s�n /home i /usr/local."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Ara s'estan instal�lant els paquets seleccionats. Aquesta operaci�\n"
-#~ "trigar� pocs minuts, tret que hagueu escollit actualitzar un\n"
-#~ "sistema existent; en aquest cas trigar� m�s temps, fins i tot\n"
-#~ "abans que s'inici� la instal�laci�."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Si el DrakX no ha pogut trobar el ratol�, o si voleu comprovar qu�\n"
-#~ "ha fet, a la part superior apareixer� la llista de ratolins.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si esteu d'acord amb els par�metres del DrakX, feu clic a 'D'acord'.\n"
-#~ "Si no, escolliu, al men� superior, el tipus de ratol� que us sembli m�s "
-#~ "semblant al vostre.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si es tracta d'un ratol� s�rie, tamb� us caldr� indicar al DrakX a\n"
-#~ "quin port s�rie est� connectat."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Aquesta secci� est� dedicada a la configuraci� d'una xarxa local\n"
-#~ "(LAN) o d'un m�dem.\n"
-#~ "\n"
-#~ "Escolliu \"LAN local\" i el DrakX intentar� trobar un adaptador\n"
-#~ "Ethernet al vostre ordinador. El sistema trobar� i inicialitzar�\n"
-#~ "autom�ticament els adaptadors PCI.\n"
-#~ "No obstant aix�, si el vostre perif�ric �s ISA, la detecci�\n"
-#~ "no funcionar�, i us caldr� escollir un programa de control a la\n"
-#~ "llista que apareixer�.\n"
-#~ "\n"
-#~ "\n"
-#~ "Com en el cas dels adaptadors SCSI, podeu deixar que, d'entrada,\n"
-#~ "el programa de control comprovi l'adaptador; si no ho feu aix�, us\n"
-#~ "caldr� especificar les opcions del programa de control que haureu\n"
-#~ "d'anar a buscar a la documentaci� del vostre maquinari.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si instal�leu un sistema Mandrake Linux en un ordinador que forma\n"
-#~ "part d'una xarxa existent, l'administrador de la xarxa us haur� de\n"
-#~ "facilitar la informaci� necess�ria (l'adre�a IP, la subm�scara de\n"
-#~ "xarxa i el nom de l'ordinador central). Si esteu configurant una\n"
-#~ "xarxa privada, com ara a casa, haureu d'escollir les adreces.\n"
-#~ "\n"
-#~ "\n"
-#~ "Escolliu \"Marcatge amb m�dem\" i es configurar� la connexi� a\n"
-#~ "Internet amb un m�dem. El DrakX intentar� trobar el m�dem, per�,\n"
-#~ "si no se'n surt, us caldr� seleccionar el port s�rie al qual est�\n"
-#~ "connectat."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "El GNU/Linux pot treballar amb molts tipus d'impressores. Per a cada\n"
-#~ "un d'aquests tipus, per�, cal una configuraci� diferent. Tingueu\n"
-#~ "en compte, per�, que l'spooler utilitza 'lp' com a nom d'impressora\n"
-#~ "per defecte, de manera que heu de tenir una impressora amb aquest nom.\n"
-#~ "No obstant aix�, podeu donar diferents noms a una impressora, separant-\n"
-#~ "los amb el car�cter '|'. D'aquesta manera, si voleu donar-li un nom m�s\n"
-#~ "aclaridor nom�s us caldr� indicar-lo en primer lloc, p.ex. \"La meva\n"
-#~ "impressora|lp\".\n"
-#~ "La impressora que contingui \"lp\" al(s) nom(s) ser� la impressora per\n"
-#~ "defecte\n"
-#~ "\n"
-#~ "\n"
-#~ "Si la vostra impressora est� connectada directament a l'ordinador,\n"
-#~ "seleccioneu \"Impressora local\". Haureu d'indicar a quin port\n"
-#~ "est� connectada i seleccionar-ne el filtre corresponent.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora que es troba a un ordinador Unix\n"
-#~ "remot, seleccioneu \"lpd remot\". Per poder-la fer funcionar no\n"
-#~ "cal cap nom d'usuari ni contrasenya, per� us caldr� saber el nom\n"
-#~ "de la cua d'impressi� del servidor remot.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora SMB (�s a dir, una impressora\n"
-#~ "que es troba a un ordinador remot amb Windows 9x/NT), per poder-ho\n"
-#~ "fer haureu d'indicar el seu nom SMB (que no �s el seu nom TCP/IP)\n"
-#~ "i possiblement la seva adre�a IP, nom d'usuari, grup de treball,\n"
-#~ "contrasenya, i, evidentment, el nom de la impressora. El mateix\n"
-#~ "per a una impressora NetWare, per� en aquest cas no us caldr� la\n"
-#~ "informaci� del grup de treball."
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "�s molt recomanable que respongueu \"S�\" aqu�. Si m�s endavant\n"
-#~ "instal�leu Microsoft Windows, sobreescriur� el sector d'arrencada.\n"
-#~ "Tret que hagueu fet el disc d'arrencada com es\n"
-#~ "recomana, ja no podreu tornar a arrencar el GNU/Linux."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Moveu la bola!"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Voleu descartar els canvis?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "De quin tipus �s el vostre ratol�?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Resolucions autom�tiques"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Per saber quines resolucions estan disponibles, en provar� algunes.\n"
-#~ "La pantalla parpellejar�...\n"
-#~ "Ho podeu desactivar si voleu; sentireu un av�s sonor quan estigui llest"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Puc mirar de trobar les resolucions disponibles (p.ex. 800x600).\n"
-#~ "De vegades, per�, aix� pot penjar l'ordinador.\n"
-#~ "Us hi voleu arriscar?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "No s'han trobat modes v�lids\n"
-#~ "Intenteu-ho amb una altra targeta de v�deo o monitor"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Recerca autom�tica de resolucions"
-
-#~ msgid "dhcpd"
-#~ msgstr "dhcpd"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB Mouse"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB Mouse (2 botons)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB Mouse (3 o m�s botons)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB Mouse"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB Mouse (2 botons)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB Mouse (3 o m�s botons)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus Mouse"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus Mouse"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus Mouse"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB Mouse (3 o m�s botons)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A o superior (s�rie)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (s�rie)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (s�rie)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (s�rie)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Generic Mouse (s�rie)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Compatible Microsoft (s�rie)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Ratol� Generic de 3 botons (s�rie)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Ratol� Kensington Thinking (s�rie)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "Necessito configurar el vostre adaptador de xarxa por poder connectar a "
-#~ "Internet."
-
-#~ msgid "nfs mount failed"
-#~ msgstr "ha fallat el muntatge de l'nfs"
-
-#~ msgid "Socket"
-#~ msgstr "S�col"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "El DrakX generar� els fitxers de configuraci� tant per a l'XFree 3.3 com "
-#~ "per a l'Xfree 4.0.\n"
-#~ "Per defecte, s'utilitza el servidor 4.0, tret que no funcioni per a la "
-#~ "vostra targeta.\n"
-#~ "\n"
-#~ "Voleu conservar l'Xfree 3.3?"
-
-#~ msgid "tie"
-#~ msgstr "lla�"
-
-#~ msgid "brunette"
-#~ msgstr "morena"
-
-#~ msgid "girl"
-#~ msgstr "noia"
-
-#~ msgid "woman-blond"
-#~ msgstr "dona-rossa"
-
-#~ msgid "automagic"
-#~ msgstr "automagic"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Criptogr�fic"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "Encarrega't del disc dur"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "No configuris la xarxa"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Voleu configurar la xarxa local per al vostre sistema?"
-
-#~ msgid "Have you been provided with a hostname?"
-#~ msgstr "Us han donat un nom d'ordinador central?"
-
-#~ msgid "Show less"
-#~ msgstr "Mostra'n menys"
-
-#~ msgid "Show more"
-#~ msgstr "Mostra'n m�s"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "URI per a la impressora local"
-
-#~ msgid "URI for Network printer"
-#~ msgstr "URI per a la impressora de xarxa"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "Dispositiu de la impressora local (URI)"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "A quin dispositiu URI est� connectada la vostra impressora?\n"
-#~ "(tingueu en compte que parallel:/dev/lp0 equival a LPT1:)"
-
-#~ msgid "Network Printer Options (URI)"
-#~ msgstr "Opcions de la impressora de xarxa (URI)"
-
-#~ msgid ""
-#~ "Choose the right Device URI for a network printer or a local file. "
-#~ "Examples:\n"
-#~ "   file:/path/to/filename.prn\n"
-#~ "   http://hostname:631/ipp/port1\n"
-#~ "   ipp://hostname/ipp/port1\n"
-#~ "   lpq://hostname/queue\n"
-#~ "   socket://hostname\n"
-#~ "   socket://hostname:9100"
-#~ msgstr ""
-#~ "Seleccioneu l'URI de dispositiu correcte per a una impressora de xarxa o "
-#~ "un fitxer local. Exemples:\n"
-#~ "   file:/cam�/al/nomdefitxer.prn\n"
-#~ "   http://ordinadorcentral:631/ipp/port1\n"
-#~ "   ipp://ordinadorcentral/ipp/port1\n"
-#~ "   lpq://ordinadorcentral/cua\n"
-#~ "   socket://ordinadorcentral\n"
-#~ "   socket://ordinadorcentral:9100"
-
-#~ msgid "Local Area Network specification"
-#~ msgstr "Especificaci� de la xarxa d'�rea local"
-
-#~ msgid "You may now decide which class C network to use.\n"
-#~ msgstr "Ara podeu decidir quina xarxa de classe C voleu utilitzar.\n"
-
-#~ msgid "Internet Connection Sharing - setup of %s"
-#~ msgstr "Connexi� a Internet compartida: configuraci� de %s"
-
-#~ msgid ""
-#~ "The following interface is about to be configured:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Ara es configurar� la interf�cie seg�ent:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-
-#~ msgid "Everything configured!"
-#~ msgstr "S'ha configurat tot!"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Quina �s la disposici� del vostre teclat?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Voleu que intenti trobar targetes PCMCIA?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Voleu que intenti trobar els dispositius %s?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr ""
-#~ "Voleu configurar el marcatge amb xarxa per m�dem per al vostre sistema?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Voleu que intenti trobar dispositius PCI?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "S'est� cercant la partici� arrel."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr ""
-#~ "%s: Aquesta partici� no �s arrel; si us plau, seleccioneu-ne una altra."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Si us plau, seleccioneu una partici� per utilitzar-la com a arrel."
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "No teniu cap partici� de Windows!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "No teniu prou espai per al Lnx4win"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Benvingut al LILO, la utilitat que us permet triar el sistema operatiu!\n"
-#~ "\n"
-#~ "Per obtenir una llista de les eleccions possibles, premeu <TAB>.\n"
-#~ "\n"
-#~ "Per carregar-ne una, escriviu-ne el nom i premeu <INTRO> o espereu %d "
-#~ "segons\n"
-#~ "fins a l'arrencada predeterminada.\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Benvingut al SILO, la utilitat que us permet triar el sistema operatiu!\n"
-#~ "\n"
-#~ "Per obtenir una llista de les eleccions possibles, premeu <TAB>.\n"
-#~ "\n"
-#~ "Per carregar-ne una, escriviu-ne el nom i premeu <INTRO> o espereu %d "
-#~ "segons\n"
-#~ "fins a l'arrencada predeterminada.\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "Opcions principals del SILO"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Aquestes s�n les entrades seg�ents del SILO.\n"
-#~ "Podeu afegir-ne algunes m�s o canviar-ne les existents."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Aquesta etiqueta ja est� en �s"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Ha fallat la instal�laci� del SILO. S'ha produ�t l'error seg�ent:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "En primer lloc, el DrakX intentar� trobar un o m�s adaptadors SCSI\n"
-#~ "PCI. Si en troba, i sap quin(s) programa(es) de control utilitzar,\n"
-#~ "l'inserir� o els inserir� autom�ticament.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si el vostre adaptador SCSI �s una targeta ISA, o si �s PCI per�\n"
-#~ "el DrakX no sap amb quin programa de control ha d'utilitzar-la, o\n"
-#~ "si no teniu cap adaptador SCSI, se us preguntar� si en teniu un o\n"
-#~ "no. Si no en teniu cap, respongueu \"No\". Si en teniu un o m�s,\n"
-#~ "respongueu \"S�\". Apareixer� una llista de programes de control,\n"
-#~ "de la qual n'haureu de triar un.\n"
-#~ "\n"
-#~ "\n"
-#~ "Un cop hagueu triat el programa de control, el DrakX us preguntar�\n"
-#~ "si voleu establir-ne les opcions. Primer, per�, deixeu que el\n"
-#~ "programa de control explori el maquinari: normalment funciona b�.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no, no oblideu la informaci� sobre el vostre maquinari que\n"
-#~ "pugueu aconseguir a la documentaci� o al Windows (si el teniu al\n"
-#~ "sistema), com aconsella la guia d'instal�laci�. Aquestes s�n les\n"
-#~ "opcions que haureu de proporcionar al programa de control."
-
-#~ msgid "Shutting down"
-#~ msgstr "S'est� tancant l'ordinador"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "S'han trobat alguns tipus de lletra \"true type\" del Windows a "
-#~ "l'ordinador.\n"
-#~ "Voleu utilitzar-les? Assegureu-vos que esteu autoritzat a utilitzar-les "
-#~ "sota Linux."
-
-#~ msgid "useless"
-#~ msgstr "in�til"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Escolliu \"Instal�la\" si no hi ha instal�lada cap versi� anterior de "
-#~ "Linux,\n"
-#~ "o si voleu utilitzar diverses distribucions o versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Escolliu \"Actualitzaci�\" si voleu actualitzar una versi� anterior de\n"
-#~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) 6.0 (Venus),\n"
-#~ "6.1 (Helios), Gold 2000 o 7.0 (Air)."
-
-#~ msgid ""
-#~ "(a user ``mandrake'' with password ``mandrake'' has been automatically "
-#~ "added)"
-#~ msgstr ""
-#~ "(s'ha afegit autom�ticament un usuari ``mandrake'' amb contrasenya "
-#~ "``mandrake'')"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Voleu utilitzar el LILO?"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "Ara podeu seleccionar els paquets que voleu instal�lar.\n"
-#~ "\n"
-#~ "\n"
-#~ "En primer lloc, podeu seleccionar el grup del paquet a instal�lar\n"
-#~ "o actualitzar. Despr�s, podeu seleccionar m�s paquets segons la\n"
-#~ "mida total que voleu seleccionar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si treballeu amb el mode expert, podeu seleccionar els paquets\n"
-#~ "individualment.\n"
-#~ "Tingueu en compte, per�, que alguns paquets necessiten que altres\n"
-#~ "tamb� estiguin instal�lats.\n"
-#~ "Aix� s'anomena 'depend�ncia de paquets'. Els paquets que\n"
-#~ "seleccioneu, i els que aquests necessitin, es seleccionaran\n"
-#~ "autom�ticament per a la instal�laci�. No �s possible instal�lar un\n"
-#~ "paquet sense instal�lar-ne tots els dependents."
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "El LILO (el carregador de Linux) pot arrencar el Linux i altres sistemes\n"
-#~ "operatius, que normalment es detecten correctament durant la "
-#~ "instal�laci�.\n"
-#~ "Si veieu que el vostre no s'ha detectat, ara podeu afegir-ne un o m�s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no voleu que tothom pugui accedir a algun d'ells, podeu\n"
-#~ "eliminar-lo ara (caldr� un disc d'arrencada per arrencar-lo)."
-
-#~ msgid ""
-#~ "Now that you've selected desired groups, please choose \n"
-#~ "how many packages you want, ranging from minimal to full \n"
-#~ "installation of each selected groups."
-#~ msgstr ""
-#~ "Ara que ja heu seleccionat els grups desitjats, seleccioneu \n"
-#~ "quants paquets voleu, ordenant-los des de la instal�laci� m�nima \n"
-#~ "fins a la instal�laci� completa de cadascun dels grups seleccionats."
-
-#~ msgid ""
-#~ "You need %dMB for a full install of the groups you selected.\n"
-#~ "You can go on anyway, but be warned that you won't get all packages"
-#~ msgstr ""
-#~ "Us calen %dMB per a una instalaci� completa dels grups que heu "
-#~ "seleccionat.\n"
-#~ "Podeu continuar igualment, per� tingueu en compte que no tindreu tots els "
-#~ "paquets"
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Escolliu un altre CD per instal�lar"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Seleccioneu:\n"
-#~ "\n"
-#~ "  - Recomanada: Si mai no heu instal�lat el Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Personalitzada: Si esteu familiaritzat amb el Linux, podreu\n"
-#~ "triar l'�s del sistema instal�lat entre Normal, Desenvolupament o\n"
-#~ "Servidor. Trieu \"Normal\" per a una instal�laci� per a un �s\n"
-#~ "general del vostre ordinador, \"Desenvolupament\" si utilitzareu\n"
-#~ "l'ordinador principalment per a desenvolupament de programari,\n"
-#~ "o \"Servidor\" si voleu instal�lar un servidor convencional (per\n"
-#~ "a correu, impressions...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Per a experts: Si domineu el GNU/Linux i voleu realitzar una\n"
-#~ "instal�laci� totalment personalitzada, aquest �s el vostre\n"
-#~ "tipus d'instal�laci�. Podreu seleccionar l'�s del vostre sistema\n"
-#~ "com a \"Personalitzada\"."
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "S'estan descarregant els paquets criptogr�fics"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Configura el SCSI"
-
-#~ msgid "Installation CD Nr %s"
-#~ msgstr "CD d'instal�laci� Nr %s"
-
-#~ msgid ""
-#~ "Update installation image!\n"
-#~ "\n"
-#~ "Ask your system administrator or reboot to update your installation image "
-#~ "to include\n"
-#~ "the Cd-Rom image labelled \"%s\". Press Ok if image has been updated or "
-#~ "press Cancel\n"
-#~ "to avoid installation from this Cd-Rom image."
-#~ msgstr ""
-#~ "Actualitzeu la imatge de la instal�laci�!\n"
-#~ "\n"
-#~ "Consulteu a l'administrador del sistema o torneu a arrencar per "
-#~ "actualitzar\n"
-#~ "la imatge de la instal�laci� per incloure la imatge en CD-ROM etiquetada "
-#~ "com\n"
-#~ "\"%s\". Premeu D'acord si la imatge s'ha actualitzat o premeu Cancel�la "
-#~ "per\n"
-#~ "no fer la instal�laci� des d'aquesta imatge en Cd-ROM."
-
-#~ msgid "Which language do you want?"
-#~ msgstr "Quin idioma voleu?"
-
-#~ msgid "Hurt me plenty"
-#~ msgstr "Fes-me molt de mal"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Quina utilitzaci� voleu?"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Instal�laci� o actualitzaci�"
-
-#~ msgid "Enter a floppy (all data will be lost)"
-#~ msgstr ""
-#~ "Inseriu un disquet a la unitat\n"
-#~ "(Se'n perdran totes les dades)"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "Ara s'instal�laran %d MB. Podeu triar instal�lar m�s programes"
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "S'han escollit massa paquets: %dMB no cap a %dMB"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "Fitxer d'inici r�pid %s incorrecte (ha fallat %s)"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Mida: %s MB"
-
-#~ msgid "US Keyboard"
-#~ msgstr "Teclat EU"
-
-#~ msgid "resizing"
-#~ msgstr "s'est� canviant la mida"
-
-#~ msgid "changing type of"
-#~ msgstr "s'est� canviant el tipus de"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Despr�s de %s partici� %s,"
-
-#~ msgid "linear"
-#~ msgstr "lineal"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "Lineal (necessari per a algunes unitats SCSI)"
-
-#~ msgid "beginner"
-#~ msgstr "principiant"
-
-#~ msgid "developer"
-#~ msgstr "desenvolupador"
-
-#~ msgid "Password:"
-#~ msgstr "Contrasenya:"
-
-#~ msgid "User name:"
-#~ msgstr "Nom d'usuari:"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "No s'ha pogut crear un disquet d'arrencada HTP.\n"
-#~ "Potser us caldr� reiniciar la instal�laci� i introduir \"%s\" a "
-#~ "l'indicador"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Cal reiniciar la instal�laci� amb els nous par�metres"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Cal reiniciar la instal�laci� arrencant des del disquet"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Introdu�u un disquet per una arrencada habilitada per a HTP\n"
-#~ "(es perdran totes les dades del disquet)"
-
-#~ msgid ""
-#~ "Linux does not yet fully support ultra dma 66.\n"
-#~ "As a work-around i can make a custom floppy giving access the hard drive "
-#~ "on ide2 and ide3"
-#~ msgstr ""
-#~ "El Linux encara no suporta completament l'ultra dma 66.\n"
-#~ "Com a alternativa, puc fer un disquet personalitzat que doni acc�s a tot "
-#~ "el disc dur a ide2 i ide3"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "Ja existeix una entrada %s"
-
-#~ msgid "Installation CD Nr 1"
-#~ msgstr "CD d'instal�laci� Nr 1"
-
-#~ msgid "Local LAN"
-#~ msgstr "LAN local"
diff --git a/perl-install/share/po/cs.po b/perl-install/share/po/cs.po
deleted file mode 100644
index 3b88dd7d4..000000000
--- a/perl-install/share/po/cs.po
+++ /dev/null
@@ -1,12241 +0,0 @@
-# Czech messages for DrakX.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (C) 1999 MandrakeSoft
-# Vladim�r Marek <vlmarek@volny.cz>, 2000
-# Radek Vybiral <Radek.Vybiral@vsb.cz>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-13 14:25GMT+0100\n"
-"Last-Translator: Radek Vyb�ral <Radek.Vybiral@vsb.cz>\n"
-"Language-Team: Czech <cs@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfigurovat v�echny monitory nez�visle"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Pou��t roz���en� Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurovat pouze kartu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Konfigurace dvou monitor�"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"V� syst�m podporuje zobrazen� na dvou monitorech.\n"
-"Co chcete d�lat?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafick� karta"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Zvolte typ va�� grafick� karty"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Zvolte X server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Zvolte ovlada� pro X server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Ovlada� pro X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kter� XFree by jste cht�li pou��t?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va�e karta podporuje 3D akceleraci, ale pouze s XFree %s.\n"
-"Pokud pou�ijete XFree %s, m��ete na druhou stranu dos�hnout lep��ch v�sledk� "
-"ve 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "S XFree %s m��e va�e karta vyu��t 3D hardwarov� akcelerace."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s s hardwarovou 3D akcelerac�"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"S XFree %s m��e va�e karta vyu��t 3D hardwarov� akcelerace.\n"
-" TOTO JE POUZE EXPERIMENT�LN� VERZE, A MٮE V�ST K NESTABILIT� SYST�MU."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s s EXPERIMENT�LN� 3D hardwarovou akcelerac�"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va�e karta podporuje 3D akceleraci, ale pouze s XFree %s,\n"
-"TOTO JE POUZE EXPERIMENT�LN� VERZE, A MٮE V�ST K NESTABILIT� SYST�MU.\n"
-"Va�e karta je podporov�na i v XFree %s, kde m��e m�t lep�� podporu pro 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instala�n� ovlada� pro obrazovku)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Nastaven� XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Kolik pam�ti je na va�� grafick� kart� ?"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Zvolte mo�nosti pro dan� X server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Zvolte typ sv�ho monitoru"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva rozhoduj�c� parametry jsou: vertik�ln� synchroniza�n� frekvence, co� je\n"
-"frekvence, kterou je obnovov�na cel� obrazovka, a frekvence ��dkov�\n"
-" synchronizace (horiz. sync. rate), co� je frekvence jakou jsou zobrazov�ny\n"
-"jednotliv� mikro��dky (scanline).\n"
-"\n"
-"Je VELMI D�LE�IT� abyste nezvolili typ monitoru se schopnostmi vy���mi ne� "
-"m�\n"
-"v� monitor, proto�e byste si ho t�m mohli po�kodit. Jestli�e si nejste "
-"jist�\n"
-"zvolte rad�ji typ s ni���mi schopnostmi."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizont�ln�(��dkov�) synchronizace"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertik�ln�(obrazovkov�) synchronizace"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor nen� nastaven"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafick� karta je�t� nen� nastavena"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Je�t� nejsou zvolena rozli�en�"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Chcete si vyzkou�et nastaven�?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Varov�n�: na t�to grafick� kart� je testov�n� nebezpe�n�"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Vyzkou�et nastaven�"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"zkuste zm�nit n�kter� parametry"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Vyskytla se tato chyba:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Test skon�� automaticky za %d sekund"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Je to spr�vn� nastaven�?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Vyskytla se chyba, zkuste zm�nit n�kter� parametry"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rozli�en�"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Vyberte si rozli�en� a barevnou hloubku"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafick� karta: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "V�ce"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Expertn� re�im"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Uk�zat v�e"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rozli�en�"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Rozlo�en� kl�vesnice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Typ my�i: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "P��pojen� my�i: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizont�ln� frekvence monitoru: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertik�ln� frekvence monitoru: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafick� karta: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikace grafick� karty: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Pam� na gr. kart�: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Barevn� hloubka: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rozli�en�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ovlada�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "P�ipravuji nastaven� X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Co chcete d�lat?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Zm�nit monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Zm�nit grafickou kartu"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Zm�nit parametry X Serveru"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Zm�nit rozli�en�"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Zobrazit informace"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Znovu vyzkou�et nastaven� X"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Konec"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zachovat zm�ny?\n"
-"Aktu�ln� konfigurace je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Spou�t� se X"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"M��u nastavit v� po��ta� tak, aby automaticky spustil X p�i startu.\n"
-"Chcete aby po��ta� po zapnut� spustil grafick� re�im?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Pro aktivaci zm�n se pros�m znovu p�ihlaste na %s"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Pros�m odhlaste se a pak stiskn�te Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 barev (8 bit�)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tis�c barev (15 bit�)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tis�c barev (16 bit�)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 mili�n� barev (24 bit�)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardy barev (32 bit�)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB nebo v�ce"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Klasick� VGA, 640x480 p�i 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 p�i 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Kompatibiln� s 8514, 1024x768 p�i 87 Hz prokl�dan� (ne 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 p�i 87 Hz prokl�dan�, 800x600 p�i 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Lep�� Super VGA, 800x600 p�i 60 Hz, 640x480 p�i 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Neprokl�dan� SVGA, 1024x768 p�i 60 Hz, 800x600 p�i 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Vysokofrekven�n� SVGA, 1027x768 p�i 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multifrekven�n� kter� um� 1280x1024 p�i 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multifrekven�n�, kter� um� 1280x1024 p�i 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multifrekven�n�, kter� um� 1280x1024 p�i 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor, kter� um� 1600x1200 p�i 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor, kter� um� 1600x1200 p�i 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Prvn� sektor zav�d�c�ho diskov�ho odd�lu"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Prvn� sektor disku (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instalace SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kam chcete nainstalovat zav�d�c� program?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalace LILO/Grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO s textovou nab�dkou"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO s grafickou nab�dkou"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Spu�t�n� s DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Z�kladn� nastaven� zav�d�c�ho programu"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Zav�d�c� program"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalace zav�d�c�ho programu"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Startovac� za��zen�"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nefunguje se star�m BIOSem)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompaktn�"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompaktn�"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Textov� re�im"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Prodleva p�ed automatick�m spu�t�n�m"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Heslo"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Heslo (podruh�)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Omezen� nastaven� z p��kazov� ��dky"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "omezen�"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Vy�istit /tmp p�i ka�d�m startu"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Pokud je t�eba, up�esn�te velikost pam�ti (nalezeno %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Povolit v�ce profil�"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Zadejte velikost pam�ti v MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Volba ''Omezen� nastaven� z p��kazov� ��dky'' je bezp�edm�tn� bez hesla"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Zkuste to znovu, pros�m"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Hesla nejsou shodn�"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "�vodn� zpr�va"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Prodleva pro firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Prodleva p�i spu�t�n�"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Povolit spu�t�n� z CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Povolit zavad�� OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "V�choz� OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Rozhodli jste se nainstalovat zavad�� syst�mu na odd�l.\n"
-"To znamen�, �e ji� zavad�� na disku, ze kter�ho spou�t�te syst�m n�jak� je "
-"(nap�. System Commander).\n"
-"\n"
-"Ze kter�ho disku spou�t�te syst�m?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Tady jsou v�echny z�znamy.\n"
-"M��ete p�idat dal�� nebo zm�nit st�vaj�c�."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "P�idat"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Hotovo"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Zm�nit"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Jak� typ z�znamu chcete p�idat?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Jin� syst�m (SunOs...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Jin� syst�m (MacOs...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Jin� syst�m (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Obraz(image)"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Ko�enov�(root)"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "P�ipojit"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Pro �ten� i z�pis"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabulka"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nejist�"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Zna�ka"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "V�choz�"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-velikost"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Bez Videa"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Odstranit z�znam"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Pr�zdn� zna�ka nen� povolena"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Mus�te zadat soubor s j�drem"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Mus�te zadat ko�enov� odd�l"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Tato zna�ka se ji� pou��v�"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Na�el jsem %s %s rozhran�"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "M�te je�t� n�jak� jin�?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "M�te n�jak� %s rozhran�?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ano"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Uk�zat informace o hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaluji ovlada� pro %s kartu %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kter� %s ovlada� m�m zkusit?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"V n�kter�ch p��padech pot�ebuje ovlada� %s pro svoji spr�vnou funkci dal��\n"
-"informace, p�esto�e norm�ln� funguje i bez nich. Cht�li byste zadat\n"
-"n�jak� dopl�uj�c� mo�nosti, nebo rad�ji nech�te ovlada� samostatn� "
-"prozkoumat\n"
-"hardware va�eho po��ta�e, aby z�skal informace kter� pot�ebuje? Zkoum�n�\n"
-"hardware m��e ve vyj�me�n�ch p��padech zp�sobit zamrznut� po��ta�e, ale "
-"nem�lo\n"
-"by v ��dn�m p��pad� zp�sobit jin� �kody."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatick� prozkoum�n�"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Zadejte mo�nosti"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Nyn� lze zadat volby pro p��slu�n� modul %s.\n"
-"Pozn.: ka�d� adresa by m�la b�t ve tvaru 0x nap�. '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nyn� m��ete poskytnout modulu %s dal�� parametry.\n"
-"Volby se zad�vaj� ve tvaru ''jm�no=hodnota jm�no2=hodnota2 ...''.\n"
-"Nap��klad, ''io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Volby modulu:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Spu�t�n� modulu %s selhalo.\n"
-"Chcete to zkusit s jin�mi parametry?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "p��stup k program�m v X prost�ed�"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "p��stup k rpm n�stroj�m"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "povolit \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "p��stup k administrativn�m soubor�m"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(u� byl p�id�n %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Toto heslo je p��li� jednoduch�"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Pros�m zadejte u�ivatelsk� jm�no"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "U�ivatelsk� jm�no m��e obsahovat pouze mal� p�smena, ��sla, '-' a '_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Toto u�ivatelsk� jm�no u� bylo p�id�no"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "P�idat u�ivatele"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Zadejte u�ivatele\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Vytvo�it u�ivatele"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Skute�n� jm�no"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "U�ivatelsk� jm�no"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatick� p�ihl�en�"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"M��u nastavit v� po��ta� tak, aby automaticky p�ihl�sil vybran�ho "
-"u�ivatele.\n"
-"Chcete pou��t tuto mo�nost?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Zvolte standardn�ho u�ivatele :"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Vyberte si, kter� spr�vce oken m� b�t spou�t�n:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Pros�m zvolte si jazyk, kter� chcete pou��vat."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "M��ete si zvolit dal�� jazyky, kter� budou dostupn� po instalaci"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "V�echno"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Povolit v�em u�ivatel�m"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Vlastn�"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Nesd�let"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Bal��ek %s mus� b�t nainstalov�n. Chcete ho nainstalovat?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Nyn� lze prov�st export p�es NFS nebo Samba protokol. Kter� chcete"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Chyb� pot�ebn� bal��ek %s"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Chcete povolit u�ivatel�m, aby si mohli sd�let adres��e ve sv�m domovsk�m "
-"adres��i?\n"
-"Pokud to povol�te, u�ivatel�m sta�� pouze kliknout na \"Sd�let\" v "
-"aplikac�ch konqueror a nautilus.\n"
-"\n"
-"Lze tak� prov�st \"Vlastn�\" povolen� pro jednotliv� u�ivatele.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Zru�it"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Spustit userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Sd�len� mezi u�ivateli pou��v� skupinu \"fileshare\". \n"
-"U�ivatele lze do t�to skupiny p�idat pomoc� n�stroje userdrake."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Dve�e doko��n"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Slab�"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardn�"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Vysok�"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Vy���"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidn�"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Tato �rove� mus� b�t pou�ita s rozmyslem. Sice m��ete snadn�ji pou��vat "
-"sv�j\n"
-"syst�m, ale na druhou stranu je velmi citliv�: Nesm� b�t pou�it pro\n"
-"po��ta� p�ipojen� k Internetu. Pro p�ihl�en� nen� zapot�eb� ��dn� heslo."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Hesla jsou nyn� aktivn�, ale st�le nedoporu�uji pou��t tento po��ta� na s�ti."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Toto je standardn� �rove� zabezpe�en� pro po��ta�, kter� je pou��v�n jako "
-"klient pro p�ipojen� k internetu."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Existuj� zde n�kter� omezen� a ka�dou noc jsou spu�t�ny automatick� testy."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"S touto bezpe�nostn� �rovn� je mo�n� pou��vat po��ta� jako server.\n"
-"Bezpe�nost je nyn� dostate�n� pro server s p�ipojen�m mnoha klient�.\n"
-"Pozn�mka: pokud je po��ta� pou��v�n pouze jako klient pro p�ipojen� k "
-"Internetu, je lep�� zvolit ni��� �rove�."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Tato �rove� m� vlastnosti p�edchoz� �rovn�, ale syst�m je �pln� uzav�en.\n"
-"Zabezpe�en� je nastaveno na maximum."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Zvolte si �rove� zabezpe�en�"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "�rove� zabezpe�en�"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Pou��t libsafe pro servery"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Knihovna, kter� zabra�uje �tok�m proti p�ete�en� bufferu nebo proti �patn�mu "
-"form�tov�n� �et�zc�."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Vita Vas %s, program pro start operacniho systemu!\n"
-"\n"
-"Vyberte si ze seznamu operacnich systemu nize nebo\n"
-"pockejte %d vterin pro automaticky start.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Vita Vas GRUB, program pro vyber operacniho systemu"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Pro vyber polozek pouzijte klavesy %c a %c."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Stisknete ENTER pro start vybran�ho OS, 'e' pro upravu"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "spoustecich parametru, nebo 'c' pro prikazovou radku."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Vybrana polozka bude automaticky spustena za %d sekund."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nen� dost m�sta v adres��i /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Pracovn� plocha"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Nab�dka Start"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Zav�d�c� program nelze nainstalovat na odd�l %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "n�pov�da zat�m nedostupn�.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Nastaven� stylu zav�d�n�"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "_Soubor"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Soubor/_Konec"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>K"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Nov�j�� zat��d�n� monitor "
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Nov�j�� monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradi�n� monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradi�n� Gtk+ monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Spustit Auroru p�i startu"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Re�im Lilo/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Re�im Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Jako spr�vce spou�t�n� nyn� pou��v�te %s.\n"
-"Pokud chcete spustit pr�vodce nastaven�m, klikn�te na Konfigurovat."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigurovat"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Syst�mov� re�im"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Spustit X-Window p�i startu"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne, nechci automatick� p�ihl�en�"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ano, chci automatick� p�ihl�en� s t�mto (u�ivatelem, desktopem)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "nelze otev��t /etc/inittab pro �ten�: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minut(y)"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekund"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Nelze prov�st sejmut� obrazovky p�ed rozd�len�m disk�"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Sejmut� obrazovvky budou dostupn� po instalaci v adres��i %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francie"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgie"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "�esk� republika"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "N�mecko"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "�ecko"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norsko"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "�v�dsko"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Nizozem�"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "It�lie"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Rakousko"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Spojen� st�ty americk�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Z�lohujte si nejd��v sv� data, pros�m"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "�t�te pozorn�!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jestli�e chcete pou��vat aboot, mus�te nechat voln� m�sto na za��tku disku\n"
-"(2048 sektor� sta��)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Chyba"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Pr�vodce"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Co ud�l�te ?"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"M�te jeden velik� odd�l FAT\n"
-"(v�t�inou pou��van� Microsoft Dos/Windows).\n"
-"Doporu�uji v�m nejprve zmen�it tento odd�l\n"
-"(klepn�te na n�j a potom na\n"
-"\"Zm�nit velikost\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Pros�m klepn�te na odd�l"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detaily"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "�urn�lovac� FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOs"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Odkl�dac� (swap)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Pr�zdn�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Dal��"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Souborov� syst�my:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Vytvo�it"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Zm�nit typ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "M�sto toho pou�ijte ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Smazat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Nejprve pou�ijte ``Odpojit''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "T�m �e zm�n�te typ odd�lu %s p�ijdete o v�echna jeho data"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Vyberte odd�l"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Vyberte jin� odd�l"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Konec"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "P�epnout se do m�du 'expert'"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "P�epnout se do m�du 'norm�ln�'"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Zp�t"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "P�esto chcete pokra�ovat?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Konec bez ulo�en�"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Chcete skon�it bez zaps�n� do tabulky odd�l�?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Chcete ulo�it modifikaci souboru /etc/fstab?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automaticky rozm�stit"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "V�e smazat"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informace o hardisku"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "V�echny prim�rn� odd�ly (partitions) jsou pou��v�ny"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Nem��u p�idat ��dn� dal�� odd�l"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Abyste mohli m�t v�ce odd�l�, mus�te smazat jeden existuj�c� a na jeho "
-"m�st�\n"
-"vytvo�it roz���en�(extended) odd�l"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Ulo�it tabulku odd�l�"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Obnovit tabulku odd�l�"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Z�chrana tabulky odd�l�"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Znovu na��st tabulku odd�l�"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automatick� p�ipojov�n� pro vyj�mateln� m�dia"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Zvolit soubor"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Z�lo�n� tabulka odd�l� nem� stejnou velikost\n"
-"Chcete p�esto chcete pokra�ovat?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Varov�n�"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Vlo�te disketu do mechaniky\n"
-"V�echna data na t�to disket� budou smaz�na"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Pokou��m se obnovit tabulku odd�l�"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Podrobn� informace"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "P��pojn� bod"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Volby"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Zm�nit velikost"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "P�esunout"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Form�tovat"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "P�ipojit"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "P�idat do RAIDu"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "P�idat do LVMu"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Odpojit"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Odebrat z RAIDu"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Odebrat z LVMu"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Zm�nit RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Pou��t loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Vytvo�it nov� odd�l"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Po��te�n� sektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Velikost v MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Souborov� syst�m: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Adres�� p�ipojen� (mount point): "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Nastaven�: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Odstranit soubor loopbacku?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Zm�nit typ odd�lu"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Kter� souborov� syst�m chcete pou��t?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "P�ep�n�m z ext2 na ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kam chcete p�ipojit loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kam chcete p�ipojit za��zen� %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nem��u smazat p��pojn� bod, proto�e tento odd�l je pou��v�n pro loopback.\n"
-"Odstra�te nejprve loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Po��t�m hranice souborov�ho syst�mu fat"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "M�n�m velikost"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Na tomto diskov�m odd�lu nelze m�nit velikost"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "V�echna data z tohoto odd�lu by m�la b�t z�lohov�na"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Kdy� zm�n�te velikost odd�lu %s, ztrat�te t�m v�echna jeho data"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Zvolte novou velikost"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nov� velikost v MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na kter� disk chcete odd�l p�esunout?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na kter� sektor chcete odd�l p�esunout?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "P�esouv�m"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "P�esouv�m odd�l..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Zvolte existuj�c� RAID pro p�id�n�"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nov�"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Zvolte existuj�c� LVM pro p�id�n�"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Jm�no pro LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Tento odd�l nem��e b�t pou�it pro loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "N�zev souboru loopbacku:"
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Zadejte jm�no souboru"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Soubor u� je pou��v�n jin�m loopbackem, zvolte si jin�"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Soubor u� existuje. M�m ho pou��t?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Volby pro p�ipojen�"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Dal��"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "za��zen�"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "�rove�"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "Velikost bloku(chunk)"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Bu�te opatrn�: tato akce je nebezpe�n�."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Jak� typ diskov�ho odd�lu?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Promi�te, nem��u povolit vytvo�en� /boot tak daleko na disku (na cylindru > "
-"1024).\n"
-"Bu�to pou�ijete LILO a nebude to fungovat, nebo nepou�ijete LILO a tedy "
-"nepot�ebujete /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Odd�l kter� jste zvolili jako ko�enov� (root - /) je na disku fyzicky za "
-"cylindrem 1024,\n"
-"a p�itom nem�te /boot odd�l. Jestli�e chcete pou��t spr�vce bootu (boot "
-"manager),\n"
-"p�idejte je�t� /boot odd�l"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Zvolili jste softwarovou RAID odd�l jako ko�enov� odd�l (/).\n"
-"S t�m se nen� schopn� vypo��dat ��dn� zav�d�c� program bez pou�it� odd�lu\n"
-"/boot. Ujist�te se pros�m, �e tento odd�l m�te."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Nov� tabulka odd�l� na disku %s bude zaps�na!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Aby se zm�ny uplatnily budete muset restartovat po��ta�"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Kdy� naform�tujete odd�l %s, ztrat�te t�m v�echna jeho data"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Form�tuji"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Form�tuji soubor loopbacku %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Form�tuji odd�l %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Schovat soubory"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "P�esunout soubory na nov� diskov� odd�l"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Adres�� %s ji� obsahuje n�jak� data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "P�esunuji soubory na nov� diskov� odd�l"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kop�ruji %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Odstra�uji %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "odd�l %s je nyn� rozpozn�n jako %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Za��zen�: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "P�smeno v DOSu: %s (jenom odhad)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Typ: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Jm�no: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Za��tek: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Velikost: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektor�"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Od cylindru %d do cylindru %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Naform�tovan�\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nenaform�tovan�\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "P�ipojen�\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback soubor(y): \n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Standardn� startovac� odd�l\n"
-"    (Pro MS-DOS, ne pro LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "�rove� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Velikost bloku(chunk) %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID disky %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback soubor: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Tento odd�l je odd�l\n"
-"s ovlada�i, je lep��\n"
-"no nechat neporu�en�.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Tento speci�ln� Boostrap\n"
-"odd�l je pro spu�t�n�\n"
-"dal��ho syst�mu.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Velikost: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s cylindr�, %s hlav, %s sektor�\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informace: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM disky %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Typ tabulky odd�l�: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na sb�rnici %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Volby: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Kl�� pro kryptovan� souborov� syst�m"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Vyberte si kryptovac� kl�� pro souborov� syst�m"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Tento kl�� je p��li� jednoduch� (mus� b�t alespo� %d znak� dlouh�)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Kryptovac� kl��e se neshoduj�"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Kryptovac� kl��"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Kryptovac� kl�� (znovu)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Zm�nit typ"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Pros�m klepn�te na zdroj"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Vyhledat servery"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s form�tov�n� %s skon�ilo chybou"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "nev�m jak naform�tovat %s na typ %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "p�ipojen� odd�lu %s v adres��i %s selhalo"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "selhal b�h fsck s n�vratov�m k�dem %d nebo sign�lem %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "chyba odpojov�n� %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednoduch�"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "s /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Nem��ete pou��t JFS pro odd�l men�� ne� 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Nem��ete pou��t ReiserFS pro odd�l men�� ne� 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "P��pojn� body (mount points) mus� za��nat '/'"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Odd�l s p��pojn�m bodem %s u� existuje\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nelze pou��t LVM Logick�ho disku na p�ipojen� bod %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Tento adres�� mus� krom� ko�enov�ho souborov�ho syst�mu z�stat"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Pro tento p��pojn� bod pot�ebujete opravdov� souborov� syst�m (Ext2, "
-"ReiserFS)\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Nelze pou��t kryptovan� souborov� syst�m na p�ipojen� bod %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nen� dostatek m�sta pro automatick� rozd�len� disku"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nic ned�lat"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Chyba p�i otev�r�n� %s pro z�pis: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Stala se chyba - nebylo nalezeno ��dn� za��zen� na kter�m by se daly "
-"vytvo�it nov� souborov� syst�my. Zkontrolujte pros�m hardware"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nem�te ��dn� odd�ly!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux je v�ceu�ivatelsk� syst�m, co� znamen�, �e ka�d� u�ivatel m��e "
-"m�t\n"
-"sv� vlastn� nastaven�, soubory atd. V�ce se do�tete v \"P��ru�ce u�ivatele"
-"\".\n"
-"Na rozd�l od u�ivatele root, kter� se spr�vcem po��ta�e, u�ivatel�, kte�� "
-"jsou\n"
-"zde vytvo�eni, nemaj� opr�vn�n� m�nit nic krom� sv�ch soubor� a nastaven�.\n"
-"Doporu�uje se vytvo�it ��et pro minim�ln� jednoho regul�rn�ho u�ivatele.\n"
-"Tento ��et se pou��v� na v�echny b�n� �koly. A�koliv je velmi praktick�\n"
-"p�ihla�ovat se ka�d� den jako u�ivatel Root, je to tak� velmi nebezpe�n�!\n"
-"Jedna mal� chyba m��e zp�sobit to, �e cel� opera�n� syst�m nebude funk�n�.\n"
-"Pokud ud�l�te chybu jako norm�ln� u�ivatel, m��ete p�ij�t o soubory, ale "
-"nepo�kod�\n"
-"se cel� syst�m.\n"
-"\n"
-"Jako prvn� zadejte re�ln� jm�no. Nen� to povinn�, tak�e m��ete zadat co "
-"chcete\n"
-"a drakX pou�ije prvn� slovo jako u�ivatelsk� jm�no, pod kter�m se bude "
-"u�ivatel\n"
-"hl�sit do syst�mu. Je mo�n� ho n�sledn� zm�nit. D�le se zad�v� heslo pro\n"
-"u�ivatele. Volba hesla pro norm�ln� u�ivatele sice nen� tak kritick� jako\n"
-"pro spr�vce, ale i tak se doporu�uje nepodce�ovat bezpe�nost.\n"
-"\n"
-"Pokud kliknete na \"P�idat u�ivatele\", m��ete tak p�id�vat u�ivatel� kolik\n"
-"pot�ebujete, nap�. sv� p��tel�, ��et pro otce �i sestru. Pokud m�te v�echny\n"
-"u�ivatele vytvo�eny, klikn�te na \"Hotovo\". \n"
-"\n"
-"Kliknut�m na tla��tko \"Roz���en�\" m��ete pro nov� ��et zm�nit shell, "
-"kter�\n"
-"u�ivatel bude pou��vat (v�choz� je bash)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ka�d� odd�l vypsan� n��e m�: \"Jm�no\", \"Velikost\".\n"
-"\n"
-"\"Jm�no\" je slo�eno n�sledovn�: \"typ pevn�ho disku\", \"��slo disku\",\n"
-"\"��slo odd�lu\". (nap��klad \"hda1\").\n"
-"\n"
-"Pokud m�te IDE disky, pak je \"typ pevn�ho disku\" \"hd\", pokud m�te SCSI,\n"
-"ozna�en� bude \"sd\".\n"
-"\n"
-"\"��slo disku\" je v�dy p�smeno za \"hd\" nebo \"sd\". Pro IDE disky je "
-"takto:\n"
-"\n"
-" * \"a\" znamen� \"master disk na prim�rn�m IDE �adi�i\",\n"
-"\n"
-" * \"b\" znamen� \"slave disk na prim�rn�m IDE �adi�i\",\n"
-"\n"
-" * \"c\" znamen� \"master disk na sekund�rn�m IDE �adi�i\",\n"
-"\n"
-" * \"d\" znamen� \"slave disk na sekund�rn�m IDE �adi�i\".\n"
-"\n"
-"Pro SCSI disky plat�, �e \"a\" je \"nejmen�� SCSI ID\", \"b\" je \"druh�\n"
-"nejmen�� SCSI ID\" atd."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Distribuce Mandrake Linux je slo�ena z n�kolika CD. Instala�n� program v�,\n"
-"na kter�m disku je um�st�n jak� soubor a v p��pad� pot�eby vysune CD a "
-"vy��d�\n"
-"si v�m�nu CD za jin�."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"V t�to chv�li je mo�n� si vybrat, kter� programy chcete nainstalovat.\n"
-"Mandrake Linux obsahuje t�m�� tis�c bal��k� s programy a ur�it� nebudete\n"
-"pot�ebovat v�echny.\n"
-"\n"
-"Pokud instalujete z CDROM, budete nejprve dot�z�ni na to, jak� CD m�te\n"
-"(pouze Expertn� re�im). Ozna�te ty CD, kter� m�te a kter� chcete pou��t \n"
-"pro instalaci. Po v�b�ru klikn�te na \"OK\".\n"
-"\n"
-"Bal��ky jsou rozd�leny do skupin, kter� odpov�daj� tomu, jak je nej�ast�ji\n"
-"po��ta� pou��v�n. Skupiny jsou um�st�ny do �ty�ech sekc�:\n"
-"\n"
-" * \"Pracovn� stanice\": pokud pl�nujete pou��vat po��ta� p�ev�n� na\n"
-"b�nou pr�ci, vyberte si z dal��ch skupin odpov�daj�c� bal��ky.\n"
-"\n"
-" * \"V�voj\": pokud budete na po��ta�i programovat, m��ete si z t�to\n"
-"sekce vybrat dal�� skupiny.\n"
-"\n"
-" * \"Server\": pokud bude po��ta� provozov�n jako server, m�te mo�nost\n"
-"vybrat si ty nejb�n�j�� slu�by, kter� chcete nainstalovat.\n"
-"\n"
-" * \"Grafick� prost�ed�\": pokud preferujete grafick� prost�ed�, zde je\n"
-"nab�dka n�kolika prost�ed�, ze kter� si mus�te vybrat nejm�n� jedno,\n"
-"aby bylo mo�n� grafick� prost�ed� nainstalovat.\n"
-"\n"
-"Pokud p�ejedete my�� nad skupinou, objev� se kr�tk� text, kter� vysv�tluje,\n"
-"co je obsahem dan� skupiny. Pokud nevyberete p�i instalaci ��dnou skupinu,\n"
-"zobraz� se ot�zka na instalaci n�kolika typ� minim�ln� instalace:\n"
-"\n"
-" * \"Podpora X\" Provede instalaci minim�ln� podpory pro prost�ed� X-"
-"Window.\n"
-"\n"
-" * \"Se z�kladn� dokumentac�\" Nainstaluje syst�m se z�kladn�mi programy a "
-"jejich dokumentac�. Tento typ je vhodn� pro instalaci serveru.\n"
-"\n"
-" * \"Minim�ln� instalace\" Nainstaluje se opravdu nezbytn� minimum aby bylo "
-"mo�n� provozovat Linux z p��kazov� ��dky. Instalace zabere asi 65MB.\n"
-"\n"
-"Pokud zatrhnete volbu \"Vlastn� v�b�r bal��k�\", zobraz� se seznam v�ech\n"
-"bal��k�, kter� je mo�no nainstalovat. Je to dobr� v tom p��pad�, �e chcete\n"
-"m�t kontrolu nad t�m, co se bude instalovat.\n"
-"\n"
-"Pokud jste spustili instalaci v re�imu \"Aktualizace\", m��ete zru�it v�b�r\n"
-"dan�ch skupin, ��m� zabr�n�te instalaci nov�ch bal��k�. To je u�ite�n�\n"
-"pro p��pad opravy existuj�c�ho syst�mu."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"V z�vislosti na tom, zda jste zvolili individu�ln� v�b�t bal��k�, nab�dne\n"
-"se stromov� struktura, obsahuj�c� v�echny bal��ky organizovan� do skupin.\n"
-"P�i proch�zen� stromu m��ete vybrat jednotliv� bal��ky nebo cel� skupiny.\n"
-"\n"
-"Pokud vyberete bal��ek nebo skupinu, v prav� ��sti se objev� popis.\n"
-"Pokud m�te v�b�r hotov�, klikn�te na tla��tko \"Instalovat\", kter� spust�\n"
-"instala�n� proces. Doba trv�n� instalace z�vis� po�tu bal��k� a na "
-"rychlosti\n"
-"va�eho po��ta�e. Zb�vaj�c� �as je zobrazov�n na obrazovce, tak�e m�te\n"
-"odhad na to, zda si stihnete d�t ��lek k�vy. :-)\n"
-"\n"
-"Pokud mezi vybran�mi bal��ky jsou serverov� programy, zobraz� se dotaz na "
-"to,\n"
-"zda opravdu chcete tyto servery nainstalovat. V distribuci Mandrake Linux\n"
-"jsou tyto servery spu�t�ny p�i startu syst�mu. I kdy� v dob� vyd�n� "
-"distribuce\n"
-"nejsou zn�my ��dn� bezpe�nostn� probl�my, mohou se vyskytnout pozd�ji.\n"
-"Pokud nev�te, k �emu jsou ur�eny n�kter� serverov� slu�by, klikn�te na \"Ne"
-"\".\n"
-"Kliknut�m na \"Ano\" se dan� slu�by nainstaluj� a spust� p�i startu!\n"
-"\n"
-"Volba \"Automatick� z�vislosti\" odstra�uje varovn� hl�en�, kter� se "
-"objev�\n"
-"v�dy, kdy� vyberete bal��ek, kter� m� dal�� z�vislosti a instala�n� program\n"
-"tak mus� vybrat dal�� pot�ebn� bal��ky.\n"
-"\n"
-"Mal� ikonka diskety umo��uje nahr�t ji� p�edt�m vybran� seznam bal��k�.\n"
-"Klikn�te na ikonu a vlo�te disketu s ulo�en�m v�b�rem. V posledn�m kroku\n"
-"bude n�vod, jak si tuto disketu vytvo�it."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"V tomto kroku se provede nastaven� p�ipojen� k internetu/s�ti. Pokud chcete\n"
-"p�ipojit sv�j po��ta� k m�stn� s�ti nebo k internetu, klepn�te na \"OK\"\n"
-"a spust� se automatick� detekce s��ov� karty nebo modemu. Pokud tato\n"
-"detekce sel�e, odzna�te p�i dal��m pokusu \"Pou��t automatickou detekci"
-"\"Pokud nechcete nyn� nastavit s�� nebo to chcete prov�st pozd�ji, "
-"jednodu�e\n"
-"klepn�te na tla��tko \"Zru�it\".\n"
-"Zp�soby p�ipojen� jsou: tradi�n� modem, ISDN modem, ADSL spojen�, kabelov�\n"
-"modem a kone�n� klasick� p�ipojen� do LAN s�t� (Ethernet).\n"
-"\n"
-"Ujist�te se, �e m�te v�echny dostupn� informace pro p�ipojen� od sv�ho\n"
-"poskytovatele p�ipojen� nebo od spr�vce s�t�. \n"
-"\n"
-"V�ce informac� naleznete v p��slu�n� kapitole v manu�lu, nebo m��ete syst�m\n"
-"nainstalovat a pou��t programy na konfiguraci p�ipojen� pozd�ji.\n"
-"\n"
-"Pokud nem�te ��dn� p�ipojen� k internetu ani k m�stn� s�ti, klepn�te na\n"
-"\"Zru�it\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Nyn� si zvolte, kter� slu�by maj� b�t spu�t�ny p�i startu po��ta�e.\n"
-"\n"
-"Je zde seznam v�ech slu�eb, kter� jsou aktu�ln� nainstalov�ny.\n"
-"Prohl�dn�te si seznam pozorn� a zru�te ty, kter� nepot�ebujete spou�t�t p�i\n"
-"startu po��ta�e.\n"
-"\n"
-"Pokud p�ejedete my�� nad n�kterou polo�kou, objev� se mal� n�pov�da\n"
-"s popisem, co dan� slu�ba d�l�. Pokud p�esn� nev�te, zda je slu�ba u�ite�n�\n"
-"nebo ne, je lep�� ji nechat ve v�choz�m stavu.\n"
-"\n"
-"Rozva�te, co za slu�by spustit, zvl�t� pokud budete po��ta� provozovat\n"
-"jako server: nepot�ebujete v�echny slu�by. Pamatujte, �e ��m v�ce slu�eb\n"
-"je spu�t�no, t�m je v�t�� nebezpe�� ne��douc�ho proniknut� do po��ta�e.\n"
-"Tak�e povolte opravdu jen ty slu�by, kter� nezbytn� pot�ebujete."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux spravuje �as podle GMT (Greenwich Mean Time) a p�ev�d� ho na\n"
-"�as podle p��slu�n� vybran� �asov� z�ny. Toto je mo�n� zru�it odzna�en�m\n"
-"volby \"Hodiny nastaveny na GMT\" a tak budou syst�mov� hodiny stejn� jako\n"
-"hardwarov�. To je dobr� v tom p��pad�, �e na po��ta�i je jin� opera�n� "
-"syst�m\n"
-"typu Windows.\n"
-"\n"
-"Volba \"Automatick� synchronizace �asu\" prov�d� automatick� nastaven� "
-"hodin\n"
-"p�ipojen�m se k �asov�mu serveru na internetu. Vyberte si v seznamu ten "
-"server,\n"
-"kter� je v�m nejbl��. Je zamo�ejm�, �e pro spr�vnou funkci mus�te m�t "
-"fuk�n�\n"
-"p�ipojen� k internetu. Na po��ta� se tak� nainstaluje �asov� server, kter�\n"
-"mohou pou��vat jin� po��ta�e ve va�� lok�ln� s�ti."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X Window System (zkr�cen� X) je srdcem grafick�ho rozhran� GNU/Linuxu,\n"
-"na kter�m jsou provozov�ny grafick� prost�ed� (KDE,Gnome,AfterStep, "
-"WindowMaker)\n"
-"V t�to sekci se DrakX pokus� nakonfigurovat X automaticky.\n"
-"\n"
-"Existuj� p��pady, kdy se automatick� detekce nezda��. Je to v p��padech, �e\n"
-"je dan� hardware velmi star� (nebo velmi nov�). Pokud se detekce poda��,\n"
-"spust� se grafick� prost�ed� v nejlep��m mo�n�m rozli�en� v z�vislosti na "
-"monitoru. Prob�hne test, kdy se zobraz� okno s ot�zkou, zda je v�e spr�vn�\n"
-"zobrazeno.\n"
-"\n"
-"Pokud prov�d�te \"Expertn�\" instalaci, spust� se pr�vodce konfigurac� X "
-"Window. V�ce informac� o pr�vodci naleznete v odpov�daj�c� sekci v manu�lu.\n"
-"\n"
-"Pokud p�i testu nastaven� uvid�te zpr�vu dob�e, odpov�zte \"Yes\" a "
-"instalace\n"
-"pokra�uje dal��m krokem.\n"
-"Pokud nic neuvid�te, test automaticky skon�� za 10 vte�in a obnov� se\n"
-"obrazovka."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"M��e se st�t, �e p�i prvn�m testu nebude zvoleno nejoptim�ln�j�� rozli�en�\n"
-"(obrazovka je p��li� mal�, je posunuta doprava �i doleva...) V t�to chv�li "
-"se\n"
-"instala�n� program dot�e, jak� rozli�en� si p�ejete a nab�dne seznam\n"
-"pou�iteln�ch rozli�en�.\n"
-"\n"
-"Pokud se nepoda�� X Window korektn� spustit, vyberte se z nab�dky \"Zm�nit"
-"\"\n"
-"grafickou kartu, vyberte \"Nezn�m� karta\" a p�i ot�zce na v�b�r serveru "
-"odpov�zte\n"
-"\"FBDev\". Tato volba dovoluje p�i pot���ch spustit X Window na v�ech\n"
-"modern�ch grafick�ch kart�ch. Potom \"Znova otestovat\" pro ov��en�."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Posledn� ot�zka je na to, zda chcete spustit grafick� prost�ed� p�i startu.\n"
-"Tato ot�zka se zobraz� i v p��pad�, �e nastaven� p�edt�m neotestujete.\n"
-"Je z�ejm�, �e odpov�te \"Ne\" v p��pad�, �e po��ta� bude pracovat\n"
-"jako server nebo v p��pad�, �e se nepoda�ilo spr�vn� nastavit grafickou "
-"kartu."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"CDROM s distribuc� Mandrake Linux m� zabudovan� z�chrann� re�im. M��ete ho\n"
-"spustit p��mo p�i spu�t�n� z CD, kdy stisknete kl�vesu >>F1<< a na "
-"p��kazov�\n"
-"��dek nap��ete >>rescue<<. Pokud po��ta� neumo��uje bootovat z CD, potom\n"
-"v tomto kroku najdete �e�en� na n�sleduj�c� situace:\n"
-"\n"
-" * pokud pou��v�te zav�d�c� program, DrakX p�ep��e zav�d�c� sektor (MBR) na\n"
-"pevn�m disku (pokud nepou��v�te jin� zav�d�c� program) aby umo�nil start "
-"bu�\n"
-"Windows nebo GNU/Linuxu (pokud m�te Windows na po��ta�i nainstalov�ny).\n"
-"Pokud pot�ebujete Windows p�einstalovat, instala�n� program Microsoftu "
-"p�ep��e\n"
-"zav�d�c� sektor a nem�te tak mo�nost spustit GNU/Linux!\n"
-"\n"
-" * pokud se objev� probl�my a nen� mo�n� spustit GNU/Linux z pevn�ho disku,\n"
-"je disketa jedinou mo�nost�, jak syst�m spustit. Obsahuje z�kladn� "
-"syst�mov�\n"
-"n�stroje na obnoven� syst�mu bu� p�� v�padku nap�jen�, chyb� v hesle nebo\n"
-"z jin�ch d�vod�.\n"
-"\n"
-"Pokud zvol�te tento krok, mus�te vlo�it disketu do mechaniky. Disketa mus�\n"
-"b�t pr�zdn�, nebo na n� mohou b�t data, kter� ji� nepot�ebujete. N�sledn� "
-"se\n"
-"provede form�t diskety a DrakX cel� jej� obsah p�ep��e."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"V tomto bod� si mus�te definovat, na kter� diskov� odd�ly budete\n"
-"instalovat nov� opera�n� syst�m Mandrake Linux. Pokud je disk pr�zdn�\n"
-"nebo existuj�c� opera�n� syst�m pou��v� cel� disk, je nutn� ho rozd�lit.\n"
-"Rozd�len� disku spo��v� ve vytvo�en� voln�ho prostoru pro instalaci\n"
-"syst�mu Mandrake Linux.\n"
-"\n"
-"Proto�e rozd�len� disku je nen�vratn� operace, je to velmi nebezpe�n�\n"
-"akce pro ty u�ivatele, kte�� nemaj� ��dn� zku�enosti.\n"
-"Pro tyto u�ivatele je dobr� pr�vodce, kter� zjednodu�� dan� proces.\n"
-"Je�t� p�ed zapo�et�m rozd�lov�n� disku si pro�t�te manu�l.\n"
-"\n"
-"Pokud m�te zvolen� Expertn� re�im, spustil se n�stroj na pr�ci s diskem: "
-"Diskdrake, kter� umo��uje l�pe nastavit diskov� odd�ly. Pokud chcete pou��t\n"
-"pr�vodce, klikn�te na tla��tko \"Pr�vodce\".\n"
-"\n"
-"Pokud m�te ji� vytvo�eny diskov� odd�ly z p�edchoz�ch instalac� nebo\n"
-"od jin�ch diskov�ch n�stroj�, lze je nyn� pou��t pro instalaci.\n"
-"\n"
-"Pokud nejsou definov�ny ��dn� diskov� odd�ly, je nutn� je vytvo�it.\n"
-"K tomu slou�� pr�vodce, kter� nab�dne n�kolik �e�en�:\n"
-"\n"
-" * \"Pou��t voln� prostor\": takto se jednodu�e automaticky disk(y) rozd�l�\n"
-"a ji� se o nic nemus�te starat.\n"
-"\n"
-" * \"Pou��t existuj�c� odd�ly\": pr�vodce detekoval jeden nebo v�ce "
-"existuj�c�ch\n"
-"Linuxov�ch odd�l� a ty nab�dne pro instalaci.\n"
-"\n"
-" * \"Pou��t voln� m�sto na odd�le s Windows\": pokud m�te na disku "
-"nainstalov�ny\n"
-"Microsoft Windows a zab�raj� cel� disk, je mo�n� tento prostor zmen�it \n"
-"a pou��t ho pro instalaci. Zm�na velikost odd�lu je provedena bez ztr�ty "
-"dat.\n"
-"Tento postup je doporu�en�, pokud chcete na disku provozovat jak syst�m\n"
-"Linux Mandrake tak i Microsoft Windows.\n"
-"\n"
-"   P�ed touto volbou si uv�domte, �e velikost odd�lu s Microsoft Windows\n"
-"bude men�� ne� je nyn�. To znamen�, �e budete m�t m�n� m�sta pro \n"
-"instalaci program� do Microsoft Windows.\n"
-"\n"
-" * \"Zru�it cel� disk\": pokud chcete smazat ve�ker� data a v�echny odd�ly\n"
-"na disku a pou��t je pro instalaci syst�mu Mandrake Linux, vyberte toto\n"
-"�e�en�. Zde postupujte opatrn�, po v�b�ru ji� nen� mo�n� vz�t volbu zp�t.\n"
-"\n"
-"   !! Pokud zvol�te tuto mo�nost, v�echna data na disku budou ztracena.!!\n"
-"\n"
-" * \"Odstranit Windows\": takto se jednodu�e sma�e cel� disk a bude se "
-"instalovat\n"
-"na cel� disk- V�echna data tak budou ztracena.\n"
-"\n"
-"    !! Pokud vyberete tuto volbu, ve�ker� data budou ztracena. !!\n"
-"\n"
-" * \"Expertn� re�im\": pokud chcete disk rozd�lit ru�n�. P�ed touto volbou "
-"bu�te\n"
-"opatrn�, je sice mocn�, ale nebezpe�n�.\n"
-"Nedoporu�uje se t�m, kte�� p�esn� nev�d�, co d�laj�."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Nyn� je instalace ukon�ena a opera�n� syst�m GNU/Linux je p�ipraven k "
-"pou�it�.\n"
-"Klikn�te na \"OK\" a syst�m bude restartov�n. Potom m��ete spustit GNU/Linux "
-"nebo\n"
-"Windows, z�le�� kter� preferujete\n"
-"\n"
-"Tla��tko \"Roz���en�\" zobraz� dal�� dv� tla��tka:\n"
-"\n"
-" * Generovat disketu pro automatickou instalaci: vytvo�� disketu, se kterou\n"
-"lze celou instalaci opakovat bez z�sahu oper�tora se stejn�mi volbami,\n"
-"kter� byly zvoleny p�i instalaci.\n"
-"\n"
-"    Po kliknut� na toto tla��tko se zobraz� dal�� dv� volby:\n"
-"\n"
-"     * : Zopakovat: je to ��ste�n� automatick� instalace, kdy se potvrzuje "
-"krok\n"
-"p�i rozd�lov�n� disk� (a pouze tento krok).\n"
-"\n"
-"    * : Automaticky: pln� automatick� instalace, data na pevn�m disku budou\n"
-"zru�ena a disk p�eps�n.\n"
-"\n"
-"   Tato volba je velmi u�ite�n�, kdy� pot�ebujete nainstalovat v�t�� po�et\n"
-"stejn�ch po��ta��. V�ce o t�to mo�nosti je na na�ich WWW str�nk�ch.\n"
-"\n"
-" * Ulo�it v�b�r bal��k�(*): ulo�� v�b�r bal��k�, kter� byl zvolen p�i "
-"instalaci.\n"
-"Pokud budete instalovat dal�� po��ta�, vlo�te disketu do mechaniky a "
-"spus�te\n"
-"instalaci, stiskn�te [F1] a napi�te na p��kazov� ��dek >linux defcfg=\"floppy"
-"\"<.\n"
-"\n"
-"(*) Pot�ebujete disketu form�tovanou FAT (Pod Linuxem ji vytvo��te p��kazem\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Ka�d� nov� vytvo�en� diskov� odd�l mus� b�t p�ed pou�it�m zform�tov�n\n"
-"(form�tov�n�m se mysl� vytvo�en� souborov�ho syst�mu).\n"
-"\n"
-"Nyn� lze form�tovat ji� existuj�c� diskov� odd�ly pro vymaz�n�\n"
-"v�ech dat, kter� obsahuj�. Pokud to chcete prov�st, vyberte diskov� odd�ly\n"
-"pro p�eform�tov�n�.\n"
-"\n"
-"Nen� ale nutn� p�eform�tovat v�echny ji� existuj�c� diskov� odd�ly.\n"
-"Je nutn� p�eform�tovat odd�ly, kter� obsahuj� opera�n� syst�m (jako je \"/"
-"\",\n"
-"\"/usr\" nebo \"/var\") ale nen� nutn� p�eform�tovat odd�ly, kter� obsahuj�\n"
-"data, kter� chcete zachovat (typicky /home).\n"
-"\n"
-"P�i v�b�ru diskov�ch odd�l�, kter� se budou form�tovat bu�te opatrn�, "
-"v�echna\n"
-"data na form�tovan�ch odd�lech budou ztracena a nelze je ji� obnovit.\n"
-"\n"
-"Pokud je v�e p�ipraveno pro form�tov�n�, klikn�te na \"OK\".\n"
-"\n"
-"Klikn�te na \"Zru�it\" pokud chcete vybrat jin� odd�ly pro instalaci\n"
-"syst�mu Mandrake Linux.\n"
-"\n"
-"Kliknut�m na \"Roz���en�\" m��ete vybrat, kter� odd�lz budou otestov�ny\n"
-"na vadn� bloky."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Nyn� za�ne nov� instalace opera�n�ho syst�mu Mandrake Linux.\n"
-"Tato operace m��e trvat n�kolik des�tek minut (z�le�� na mno�stv� bal��k�,\n"
-"kter� jste si vybrali pro instalaci a rychlosti va�eho po��ta�e).\n"
-"\n"
-"M�jte pros�m trp�livost a vy�kejte."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Poka�d�, kdy� instalujete Mandrake Linux, je mo�n�, �e n�kter� bal��ky byly\n"
-"od vyd�n� distribuce aktualizov�ny. Mohly to b�t opravy chyb �i �e�en� "
-"mo�n�ch\n"
-"bezpe�nostn�ch probl�m�. Pokud chcete vyu��t pr�v� t�to nab�dky, je mo�n�\n"
-"je nyn� st�hnout z internetu. Zvolte \"Ano\" pokud m�te funk�n� p�ipojen� "
-"na\n"
-"internet nebo \"Ne\" pokud budete instalovat aktualizace pozd�ji.\n"
-"\n"
-"Po zvolen� \"Ano\" se zobraz� seznam m�st, odkud mohou b�t aktualizace "
-"z�sk�ny.\n"
-"Vyberte si nejbli��� m�sto. N�sledn� se objev� stromov� seznam bal��k�, "
-"kter�\n"
-"je mo�no je�t� upravit a stisknut�m tla��tka \"Instalovat\" se provede "
-"sta�en�\n"
-"a instalace vybran�ch bal��k�. Akci m��ete p�eru�it klepnut�m na \"Zru�it\"."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"P�edt�m, ne� budete pokra�ovat, p�e�t�te si pozorn� podm�nky licence. Ty\n"
-"se vztahuj� k cel� distribuci Mandrake Linux a pokud s nimi nesouhlas�te,\n"
-"klikn�te na tla��tko \"Odm�tnout\". Instalace ihned skon��. Pokud chcete "
-"pokra�ovat\n"
-"v instalaci, klikn�te na tla��tko \"Potvrdit\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nyn� si vyberte �rove� zabezpe�en� va�eho po��ta�e Je z�ejm�, �e ��m v�ce "
-"je\n"
-"po��ta� vyu��v�n a ��m cenn�j�� data obsahuje, t�m je pot�eba zvolit vy���\n"
-"�rove�. Na druhou stranu, vy��� �rove� znesnad�uje n�kter� obvykl� postupy.\n"
-"V�ce informac� o �rovn�ch bezpe�nosti se do�tete v kapitole MSEC v "
-"referen�n�\n"
-"p��ru�ce. \n"
-"Pokud nev�te co vybrat, ponechte v�choz� nastaven�."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"V t�to chv�li je pot�ebn� ur�it, kter�(�) odd�l(y) budou pou�ity pro "
-"instalaci\n"
-"syst�mu Mandrake Linux. Pokud byly odd�ly ji� jednou definov�ny, bu�\n"
-"z p�edchoz� instalace GNU/Linux nebo jin�m programem na rozd�len� disku,\n"
-"je mo�n� pou��t pr�v� tyto odd�ly. Jinak mus� b�t odd�ly nov� definov�ny.\n"
-"\n"
-"Pro vytvo�en� odd�lu mus�te nejd��ve vybrat pevn� disk. Klikn�te na \n"
-"\"hda\", co� je prvn� IDE disk, nebo na \"hdb\", co� je druh� disk,\n"
-"p��padn� na \"sda\", co� je prvn� SCSI disk.\n"
-"\n"
-"Pro rozd�len� vybran�ho disku m��ete pou��t tyto volby:\n"
-"\n"
-" * \"V�e smazat\": tato volba sma�e v�echny odd�ly na disku.\n"
-"\n"
-" * \"Automaticky rozm�stit\": dojde k automatick�mu vytvo�en� odd�lu pro\n"
-"Ext2 a swap ve voln�m prostoru disku.\n"
-"\n"
-" * \"V�ce\": nab�dne dal�� mo�nosti:\n"
-"\n"
-"    * \"Ulo�it tabulku na disketu\": ulo�� tabulku odd�l� na disketu. To je\n"
-"vhodn� pro p��pad po�kozen� tabulky, kdy ji lze z t�to z�lohy obnovit.\n"
-"Doporu�ujeme vyu��t tuto mo�nost.\n"
-"\n"
-"    * \"Obnovit z diskety\": obnov� tabulku odd�l�, kter� byla ji� d��ve\n"
-"ulo�ena na disketu.\n"
-"\n"
-"    * \"Z�chrana tabulky odd�l�\": pokud je tabulka po�kozena, m��ete se\n"
-"pokusit ji opravit. Bu�te ale opatrn� a pamatujte na to, �e se to nemus� "
-"v�dy\n"
-"poda�it.\n"
-"\n"
-" * \"Znovu na��st\": zru�� v�echny zm�ny a nahraje p�vodn� tabulku odd�l�.\n"
-"\n"
-"    \"p�ipojovat vyj�mateln� m�dia\": odzna�en�m t�to volby zp�sob�, �e p�i\n"
-"p�ipojov�n� a odpojov�n� vyj�mateln�ch m�di� jako jsou CD-ROM disky a "
-"floppy\n"
-"disky je nutn� pou��t ru�n� p��kaz mount.\n"
-"\n"
-" * \"Pr�vodce\": pokud nem�te dobr� znalosti o rozd�lov�n� disk�, pou�ijte\n"
-"tuto volbu, kdy se spust� pr�vodce.\n"
-"\n"
-" * \"Odvolat\": zru�� v�echny proveden� zm�ny.\n"
-"\n"
-" * \"P�epnout norm�ln�/expertn� re�im\": dovoluje dal�� akce s odd�ly\n"
-"(typ odd�lu, volby, form�tov�n�) a zobraz� dal�� informace.\n"
-" * \"Hotovo\": pokud m�te disk rozd�len, ulo�� se zm�ny na disk.\n"
-"\n"
-"Pozn�mka: ka�dou volbu je mo�n� zadat tak� z kl�vesnice. Mezi odd�ly se\n"
-"m��ete pohybovat pomoc� kl�ves [Tab] a [�ipka nahoru/�ipka dol�].\n"
-"\n"
-"Pokud je vybr�n odd�l, lze pou��t tyto volby:\n"
-"\n"
-" * Ctrl-c pro vytvo�en� nov�ho odd�lu (pokud je vybr�n pr�zdn� odd�l);\n"
-"\n"
-" * Ctrl-d pro smaz�n� odd�lu;\n"
-"\n"
-" * Ctrl-m pro zad�n� bodu p�ipojen�.\n"
-"\n"
-"V�ce informac� o jednotliv�ch druz�ch souborov�ch syst�m� naleznete\n"
-"v kapitole o ext2fs v \"Referen�n� p��ru�ce\".\n"
-"\n"
-"Pokud instalujete na po��ta� PPC, je pot�eba vytvo�it mal� odd�l HPFS,\n"
-"tzv. \"bootstrap\" o minim�ln� velikosti 1MB, kter� bude pou�it pro zavad��\n"
-"yaboot. Pokud vytvo��te tento odd�l v�t��, nap�. 50 MB, je to dobr� m�sto "
-"pro\n"
-"ulo�en� ramdisku a j�dra pro situace z�chrany disku."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Instala�n� program nalezl na disku v�ce ne� jeden odd�l s Microsoft "
-"Windows.\n"
-"Pros�m vyberte si jeden z nich, kter� je pot�eba zmen�it pro novu instalaci\n"
-"syst�mu Mandrake Linux.\n"
-"\n"
-"Ka�d� odd�l je zobrazen n�sledovn�: \"Jm�no pro Linux\",\n"
-"\"Jm�no pro Windows\", \"Velikost\".\n"
-"\n"
-"\"Jm�no pro Linux\" je slo�eno n�sledovn�: \"typ pevn�ho disku\",\n"
-"\"��slo disku\", \"��slo odd�lu\". (nap��klad \"hda1\").\n"
-"\n"
-"Pokud m�te IDE disky, pak je \"typ pevn�ho disku\" \"hd\", pokud m�te SCSI,\n"
-"ozna�en� bude \"sd\".\n"
-"\n"
-"\"��slo disku\" je v�dy p�smeno za \"hd\" nebo \"sd\". Pro IDE disky je "
-"takto:\n"
-"\n"
-" * \"a\" znamen� \"master disk na prim�rn�m IDE �adi�i\",\n"
-"\n"
-" * \"b\" znamen� \"slave disk na prim�rn�m IDE �adi�i\",\n"
-"\n"
-" * \"c\" znamen� \"master disk na sekund�rn�m IDE �adi�i\",\n"
-"\n"
-" * \"d\" znamen� \"slave disk na sekund�rn�m IDE �adi�i\".\n"
-"\n"
-"Pro SCSI disky plat�, �e \"a\" je \"nejmen�� SCSI ID\", \"b\" je \"druh�\n"
-"nejmen�� SCSI ID\" atd.\n"
-"\n"
-"\"Jm�no pro Windows\" je p�smeno, kter� je pou�ito ve Windows\n"
-"(prvn� odd�l nebo disk m� p�smeno \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Bu�te trp�liv�. Tato operace m��e trvat n�kolik minut."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Nyn� se instala�n� program zept� na to, zda chcete prov�st (\"Doporu�enou"
-"\")\n"
-"nebo (\"Expertn�\") instalaci, kter� dovoluje v�t�� kontrolu.\n"
-"Tak� si zde m��ete vybrat, zda chcete prov�st novou instalaci nebo "
-"aktualizaci\n"
-"ji� existuj�c� verze syst�mu Mandrake Linux.:\n"
-"\n"
-" * \"Instalovat\" Kompletn� p�ema�e starou verzi. V z�vislosti na tom, co "
-"je\n"
-"na dan�m syst�mu nainstalov�no z�stanou jin� odd�ly nezm�n�ny.\n"
-"\n"
-" * \"Aktualizovat\" Provede aktualizaci instalovan�ho syst�mu Mandrake "
-"Linux.\n"
-"Rozd�len� disku i ve�ker� data u�ivatel� z�stanou zachov�na. Jinak se "
-"provede\n"
-"t�m�� �ist� instalace.\n"
-"\n"
-" * \"Aktualizovat pouze bal��ky\" Provede aktualizaci bal��k� z p�edchoz�\n"
-"verze bez dal��ch zm�n. Je tak� mo�n� nainstalovat nov� bal��ky.\n"
-"\n"
-"Aktualizace je bezprobl�mov� od verze Mandrake Linux 8.1\n"
-"\n"
-"V z�vislosti na va�ich znalostech GNU/Linuxu si m��ete vybrat z "
-"n�sleduj�c�ch\n"
-"�rovn� instalace opera�n�ho syst�mu Mandrake Linux:\n"
-"\n"
-"* Doporu�en�: volte pokud jste je�t� nikdy neinstalovali GNU/Linux. "
-"Instalace bude velmi jednoduch� a budete dot�z�ni pouze na n�kolik ot�zek.\n"
-"\n"
-"* Expertn�: jestli�e jste dob�e obezn�meni s GNU/Linuxem a chcete prov�st\n"
-"precizn� nastaven� instalace, je pr�v� pro v�s tato volba. Budete si moci\n"
-"p�esn� upravit celou instalaci. Odpov�di na ot�zky budou velmi t�k� pro\n"
-"ty, kte�� nemaj� velmi dobr� znalosti GNU/Linuxu.\n"
-"Nevolte tuto volbu, pokud p�esn� nev�te, co d�l�te."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Norm�ln� instala�n� program zvol� spr�vnou kl�vesnici na z�klad� zvolen�ho\n"
-"jazyka, tak�e nen� pot�eba nic v tomto kroku m�nit. \n"
-"M��e se ale st�t, �e nem�te kl�vesnici, kter� odpov�d� va�emu jazyku: "
-"nap��klad\n"
-"pokud jste anglicky hovo��c� �v�car, stejn� chcete m�t �v�carskou "
-"kl�vesnici.\n"
-"Nebo pokud mluv�te anglicky ale �ijete v Quebecu, je to stejn� p��pad. V "
-"obou\n"
-"p��padech se m��ete na tento instala�n� krok a vybrat si odpov�daj�c�\n"
-"kl�vesnici ze seznamu.\n"
-"\n"
-"Pokud m�te kl�vesnici pro jin� jazyk, klikn�te na tla��tko \"V�ce\"\n"
-"a zobraz� se kompletn� seznam v�ech podporovan�ch rozlo�en� kl�vesnic."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Vyberte si pros�m v�mi preferovan� jazyk, kter� se bude pou��vat p�i "
-"instalaci\n"
-"a v cel�m syst�mu.\n"
-"\n"
-"Tla��tko \"Roz���en�\" umo��uje zvolit dal�� jazyky, kter� budou tak� "
-"nainstalov�ny\n"
-"a m��ete je pou��t v syst�mu. Pokud nap��klad na po��ta�i pracuj� ob�as "
-"lid�\n"
-"ze �pan�lska, vyberte angli�tinu jako hlavn� jazyk a pod tla��tkem "
-"roz���en�\n"
-"zatrhn�te volbu \"�pan�l�tina\".\n"
-"\n"
-"Pokud m�te jazyk vybr�n, klikn�te na \"OK\" a instalace bude pokra�ovat\n"
-"dal��m krokem."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"DrakX zjistil, �e m�te dvou tla��tkovou my� a nastav� emulaci pro t�et� "
-"tla��tko.\n"
-"Taky um� rozpoznat, zda je my� PS/2, USB nebo s�riov�.\n"
-"\n"
-"Pokud chcete zadat jin� typ my�i, vyberte odpov�daj�c� typ se seznamu.\n"
-"\n"
-"Pokud vyberete jinou my� ne� ta, kter� byla detekov�na, zobraz� se "
-"testovac�\n"
-"obrazovka. Zde otestujte jak tla��tka tak i kole�ko, zda je nastaven� "
-"spr�vn�.\n"
-"Pokud my� nepracuje spr�vn�, stiskn�te mezern�k nebo ENTER na \"Zru�it\"\n"
-"a vyberte jin� typ."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Vyberte pros�m spr�vn� port. Nap��klad \"COM1\" pod MS Windows se\n"
-"v Linuxu jmenuje \"ttyS0\"."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"N�sleduj�c� rozhodnut� je jedn�m z t�ch, kter� ovliv�uj� celkovou "
-"bezpe�nost\n"
-"syst�mu GNU/Linux, tj. volba hesla pro u�ivatele \"Root\". Root je "
-"administr�torem\n"
-"syst�mu, je odpov�dn� za prov�d�n� aktualizac�, p�id�v�n� u�ivatel� a tak�\n"
-"za celkovou konfiguraci syst�mu. Zkr�cen�: root m��e �pln� v�echno!\n"
-"To je tak� d�vodem, pro� se heslo vol� takov�, aby se nedalo lehce uhodnout\n"
-"a instala�n� program zkontroluje, zda nen� p��li� jednoduch�. Jak vid�te, "
-"je\n"
-"mo�n� m�t ��et bez hesla, ale velmi d�razn� doporu�ujeme n�jak� heslo "
-"zadat,\n"
-"z jednoho d�vodu. Nemyslete si, �e pokud spust�te GNU/Linux, �e nem��ete\n"
-"ud�lat u� ��dnou chybu. U�ivatel root m��e nen�vratn� po�kodit cel� syst�m,\n"
-"vymazat pot�ebn� soubory, atd.\n"
-"\n"
-"Zvolen� heslo by se m�lo skl�dat ze znak� a ��slic a melo by b�t minim�ln� "
-"8\n"
-"znak� dlouh�. Tak� nen� dobr� si ho kamkoliv poznamen�vat.\n"
-"\n"
-"Nevolte heslo p��li� dlouh� nebo komplikovan�, bude nutn� si jej pamatovat.\n"
-"\n"
-"Heslo se zad�v� dvakr�t pro ov��en� toho, zda nedo�lo k p�eklepu p�i prvn�m\n"
-"pokusu. Tak je mo�n� heslo opravit a zadat dvakr�t stejn�.\n"
-"\n"
-"V expertn�m re�imu budete dot�z�ni na to, zda se m� pou��t autentika�n�\n"
-"server, jako je NIS nebo LDAP.\n"
-"\n"
-"Pokud se ve va�� s�ti pou��v� protokol LDAP (nebo NIS) pro ov��ov�n�\n"
-"u�ivatel�, vyberte \"LDAP\" (nebo \"NIS\"). Pokud o tom nic nev�te,\n"
-"zeptejte se administr�tora s�t�.\n"
-"\n"
-"Pokud nen� po��ta� p�ipojen do ��dn� administrovan� s�t�, zvolte\n"
-"\"Lok�ln� soubory\" pro autentikaci."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO a grub jsou zavad��e syst�mu. Tato ��st je norm�ln� pln� automatick�.\n"
-"DrakX analyzuje boot sektor a zachov� se podle toho, co nalezne:\n"
-"\n"
-" * pokud nalezne boot sektor Windows, p�ep��e ho sektorem pro LILO/grub aby\n"
-"bylo mo�n� spou�t�t jak Windows tak i Linux;\n"
-"\n"
-" * pokud nalezne boot sektor pro LILO nebo grub, tak jej p�ep��e.\n"
-"\n"
-"Pokud jsou n�jak� pochybnosti, je zobrazen dialog s v�b�rem mo�nost�.\n"
-"\n"
-" * \"Jak� spou�t�� pou��t:\" je mo�n� si vybrat:\n"
-"\n"
-"    * \"GRUB\": pokud preferujete textovou verzi zavad��e Grub.\n"
-"\n"
-"    * \"LILO s grafickou nab�dkou\": pokud preferujete LILO s grafick�m\n"
-"rozhran�m.\n"
-"\n"
-"    * \"LILO s textovou nab�dkou\": pokud preferujete textov� rozhran�.\n"
-"\n"
-"    * \"Spou�t�c� za��zen�\": ve v�t�in� p��pad� nen� nutn� m�nit v�choz�\n"
-"nastaven� (\"/dev/hda\"), ale lze nainstalovat zavad�� na druh� disk\n"
-"(\"/dev/hdb\") nebo dokonce na disketu (\"/dev/fd0\").\n"
-"\n"
-" * \"Prodleva p�es spu�t�n�m\": pokud zapnete po��ta�, je t�mto �asem\n"
-"umo�n�no u�ivateli vybrat si jin� syst�m z nab�dky ne� bude zaveden v�choz�\n"
-"syst�m.\n"
-"\n"
-"!! Vyvarujte se pokus� o to nenainstalovat zavad�� (vybr�n�m volby \"Zru�it"
-"\"),\n"
-"proto�e by m�l existovat zp�sob, jak spustit Mandrake Linux!\n"
-"Tak� si dob�e rozmyslete, jak� zm�ny zde prov�d�te !!\n"
-"\n"
-"Kliknut�m na tla��tko \"Roz���en�\" se dialog roz���� o dal�� mo�nosti,\n"
-"vyhrazen� pro znal� u�ivatele.\n"
-"\n"
-"Mandrake Linux nainstaluje sv�j vlastn� zavad��, kter� dovoluje spou�t�t\n"
-"vlastn� syst�m stejn� jako dal�� opera�n� syst�my.\n"
-"\n"
-"Pokud m�te jin� opera�n� syst�m ji� na po��ta�i, automaticky ho za�ad� do\n"
-"nab�dky pro spou�t�n�. Zde je mo�n� d�le doladit volby, kter� se p�ed�vaj� "
-"t�m,\n"
-"�e na danou nab�dkou dvakr�t poklepete, lze tak� p�idat dal�� nab�dku\n"
-"�i danou nab�dku odebrat. K dal��mu kroku se dostanete kliknut�m na \"Hotovo"
-"\"."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) a grub jsou zavad��e syst�mu, kter� mohou spustit\n"
-"bu� GNU/Linux nebo jin� opera�n� syst�m nainstalovan� na po��ta�i.\n"
-"Ve v�t�in� p��pad� jsou tyto syst�mu spr�vn� detekov�ny. Pokud se tak\n"
-"nestane, m�te mo�nost je ru�n� p�idat v t�to obrazovce. V�nujte opatrnost\n"
-"parametr�m, kter� zad�v�te.\n"
-"\n"
-"Pokud nechcete umo�nit p��stup k t�mto opera�n�m syst�m�m komukoliv, m��ete\n"
-"je z nab�dky odstranit. Ale v tom p��pad� mus�te m�t spou�t�c� disketu, ze\n"
-"kter� je mo�n� tento opera�n� syst�m spustit!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Zde se mus�te rozhodnout, kam um�stit informace pot�ebn� pro spu�t�n� "
-"syst�mu\n"
-"GNU/Linux.\n"
-"\n"
-"Pokud p�esn� nev�te co zadat, ponechte \"Prvn� sektor na disku (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Zde si m��ete vybrat tiskov� syst�m, kter� budete pou��vat. Jin� OS "
-"nab�zej�\n"
-"jeden, Mandrake nab�z� t�i.\n"
-"\n"
-" * \"pdq\" - co� znamen� 'print, don't queue' a je vhodn� tehdy, pokud "
-"nem�te\n"
-"��dn� s��ov� tisk�rny. Zvl�d� pouze n�kolik mo�nost� a tisk na n�j ze s�t�\n"
-"je velmi pomal�. Tuto volbu lze po instalaci zm�nit spu�t�n�m n�stroje "
-"PrinterDrake\n"
-"z ��d�c�ho centra Mandrake, pokud kliknete na tla��tko Expert.\n"
-"\n"
-" * \"CUPS\"'Common Unix Printing System' je vynikaj�c� v tisku na lok�ln�\n"
-"tisk�rny. Je jednoduch� a m��e fungovat jako klient i server pro klienty z "
-"\"lpd\"\n"
-"syst�mu, tak�e je s nimi kompatibiln�. Je mo�n� nastavit spoustu voleb,\n"
-"ale z�kladn� nastaven� je velmi jednoduch�. Pokud pot�ebujete emulovat\n"
-"\"lpd\" server, sta�i spustit d�mona \"cups-lpd\". M� tak� grafick� "
-"prost�ed�\n"
-"pro tisk a nastaven� tisk�rny.\n"
-"\n"
-" * \"lprNG\" - 'line printer daemon New Generation'. Tento syst�m dok�e to\n"
-"co ostatn�, ale um� tisknout na tisk�rny p�ipojen� k Novell Netware, "
-"proto�e\n"
-"podporuje IPX protokol a tak� um� zpracovat p��mo tiskov� p��kazy. Pokud\n"
-"pot�ebujete tisk na tisk�rn�ch ze s�t� Novell nebo tiskov� syst�m bez\n"
-"zvl�tn� tiskov� fronty, vyberte si lprNG.\n"
-"Jinak je preferov�n CUPS, proto�e je jednodu��� a l�pe pracuje v s�t�ch."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX se nejd��ve pokus� naj�t v�echny pevn� disky v po��ta�i. Tak� se "
-"pokus�\n"
-"naj�t PCI SCSI adapt�r(y). Pokud n�jak�(�) najde, automaticky nainstaluje\n"
-"spr�vn� ovlada�.\n"
-"\n"
-"Pokud ��dn� nanajde, budete dot�z�ni, zda v�bec m�te n�jak� SCSI adapt�r.\n"
-"Odpov�zte \"Ano\" a vyberte si se seznamu adapt�r� nebo odpov�zte \"Ne\","
-"jestli�e ��dn� adapt�r nem�te.\n"
-"Pokud p�esn� nev�te jak� m�te, m��ete to zjistit kliknut�m na tla��tko\n"
-"\"Zobrazit informace o hardware\".\n"
-"\n"
-"Pokud si vyberete ovlada�, DrakX se zept�, zda pro n�j chcete zadat n�jak�\n"
-"informace. DrakX se pokus� inicializovat hardware s volbami, kter� jsou "
-"pot�eba.\n"
-"V�t�inou to funguje dob�e.\n"
-"\n"
-"Pokud to nebude fungovat, budete muset zadat dal�� informace pro ovlada�.\n"
-"Pro dal�� n�pov�du se pod�vejte do instala�n� p��ru�ky (kapitola 3 "
-"\"Z�sk�n�\n"
-"informac� o hardware\"), kde je pops�no, jak z�skat tyto informace z "
-"Windows\n"
-"(pokud je m�te na po��ta�i), z dokumentace k hardware, nebo z internetov�\n"
-"str�nky v�robce (pokud m�te p��stup k internetu."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Pro yaboot, pro dal�� opera�n� syst�my, pro alternativn� j�dra nebo pro\n"
-"z�chrann� disk lze zde zadat dal�� parametry.\n"
-"\n"
-"Pro jin� OS je mo�n� zadat pouze n�zev a hlavn� odd�l.\n"
-"\n"
-"Pro Linux je n�kolik dal��ch mo�nost�:\n"
-"\n"
-" * Jmenovka: je to jednoduch� jm�no, kter� m��ete napsat do p��kazov�ho\n"
-"��dku pro yaboot pro zvolen� dan�ho syst�mu.\n"
-"\n"
-" * Obraz: je to jm�ho j�dra, ze kter�ho se spust� syst�m. Typicky je to "
-"vmlinux\n"
-"�i obdoba slova vmlinux s p��ponami.\n"
-"\n"
-" * Root: ko�enov� ze��zen� \"/\" p�i instalaci Linuxu.\n"
-"\n"
-" * P�idat volby: na po��ta��ch Apple pot�ebuje j�dro dal�� parametry, aby "
-"se\n"
-"spr�vn� nastavil hardware pro video, �i provedla emulace tla��tek my�i\n"
-"na kl�vesnici, proto�e my� u po��ta�e Apple nem� druh� a t�et� tla��tko.\n"
-"Zde jsou n�jak� p��klady:\n"
-"\n"
-"        video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"        video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: tato volba je ur�ena moduly, kter� se mus� nahr�t do pam�ti "
-"je�t�\n"
-"d��ve, ne� je p��stupn� spou�t�c� odd�l, �i v p��pad� opravy syst�mu.\n"
-"\n"
-" * Velikost initrd: v�choz� velikost ramdisku je 4,096 byt�. Pokud "
-"pot�ebujete\n"
-"v�t�� velikost, zadejte sem pot�ebnou hodnotu.\n"
-"\n"
-" * Read-write: be�n� je \"root\" odd�l p�ipojen nejd��ve v re�imu pouze pro\n"
-"�ten�, aby se provedlo otestov�n� syst�mu p�ed t�m, ne� se pou�ije pro b�h.\n"
-"Zde je mo�n� toto chov�n� zm�nit.\n"
-"\n"
-" * Bez grafiky: grafick� za��zen� na po��ta��ch Apple je n�kdy "
-"problematick�\n"
-"a tak je mo�n� zadat tuto volbu a zvolit nativn� podporu.\n"
-"\n"
-" * V�choz�: zvol� tuto polo�ku jako v�choz� pro v�b�r z nab�dky, kdy sta��\n"
-"pouze stisknout ENTER a spust� se. Tato polo�ka je ozna�ena \"*\" a v�echny\n"
-"v�b�ry se zobraz� po stisknut� tla��tka [Tab]."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot je zavad�� pro po��ta�e MacIntosh. Umo��uje spou�t�t jak GNU/Linux, "
-"MacOS tak i MacOSX, pokud jsou na po��ta�i nainstalov�ny. Ve v�t�in�\n"
-"p��pad� jsou tyto opera�n� syst�my spr�vn� detekov�ny. Pokud nejsou, m��ete\n"
-"zde na t�to obrazovce p�idat z�znamy ru�n�. Dejte si ale pozor na spr�vnou\n"
-"volbu parametr�.\n"
-"\n"
-"Yaboot m� tyto hlavn� volby:\n"
-"\n"
-" * �vodn� hl�ka: jednoduch� textov� zpr�va, kter� je zobrazena p�ed "
-"v�zvou.\n"
-"\n"
-" * Spou�t�c� za��zen�: ud�v� m�sto, kde jsou informace pot�ebn� pro "
-"spu�t�n�\n"
-"GNU/Linuxu. Oby�ejn� je to bootstrap odd�l, kter� byl vytvo�en ji� p�edt�m.\n"
-"\n"
-" * Prodleva pro Firmware: narozd�l od zavad��e LILO jsou zde dv� prodlevy.\n"
-"Prvn� prodleva v sekund�ch umo��uje zvolit mezi spu�t�n�m CD, OF boot,\n"
-"MacOS nebo Linuxu.\n"
-"\n"
-" * Prodleva pro j�dro: tato prodleva je podobn� prodlev� pro LILO.\n"
-"Ud�v� v n�sobc�ch 0,1 vte�iny jak dlouho se �ek�, ne� se zavede \n"
-"v�choz� j�dro.\n"
-"\n"
-" * Povolit spu�t�n� z CD?: tato volba dovoluje pou��t \"C\" pro spu�t�n� "
-"CD.\n"
-"\n"
-" * Povolit OF Boot?: tato volba dovoluje pou��t \"N\" pro spu�t�n� Open "
-"Firm.\n"
-"\n"
-" * V�choz� OS: vyberte v�choz� OS, kter� se spust� po uplynut� prodlevy."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Zde jsou shrom�d�ny r�zn� informace, kter� se vztahuj� k tomuto po��ta�i.\n"
-"V z�vislosti na tom, zda je �i nen� p��tomen dan� hardware, m��ete ale\n"
-"nemus�te, vid�t tyto polo�ky: \n"
-"\n"
-" * \"My�\": pokud je zji�t�na my�, m��ete zde zm�nit jej� nastaven�.\n"
-"\n"
-" * \"Kl�vesnice\": kliknut�m na tla��tko lze zm�nit kl�vesovou mapu.\n"
-"\n"
-" * \"�asov� p�smo\": instala�n� program se pokus� odhadnout �asov� p�smo na\n"
-"z�klad� vybran�ho jazyka. To ale nemus� souhlasit, m��ete ��t v jin� zemi\n"
-"a tak je zde umo�n�no zm�nit �asovou z�nu, ve kter� se nyn� nach�z�te.\n"
-"\n"
-" * \"Tisk�rna\": Kliknut�m na tla��tko \"Bez tisk�rny\" se spust� pr�vodce\n"
-"konfigurac� tisk�rny.\n"
-"\n"
-" * \"Zvukov� karta\": pokud byla p�i instalaci detekov�na zvukov� karta, je\n"
-"zde zobrazena. P�i instalaci nen� mo�n� nic m�nit.\n"
-"\n"
-" * \"TV karta\": pokud byla detekov�na televizn� karta, je zde zobrazena.\n"
-"P�i instalaci nen� mo�n� nic m�nit.\n"
-"\n"
-" * \"ISDN karta\": pokud byla detekov�na ISDN karta, je zde zobrazena.\n"
-"Kliknut�m na tla��tko m��ete m�nit parametry pro tuto kartu."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Vyberte disk, kter� chcete smazat pro instalaci Mandrake Linux.\n"
-"Pamatujte na to, �e v�echna data budou ztracena a nelze jeji� obnovit!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klikn�te na \"OK\", pokud chcete smazat v�echna data a odd�ly na tomto\n"
-"pevn�m disku. Bu�te opatrn�, po odkliknut� nelze obnovit ��dn� d��v�j�� "
-"data\n"
-"ani odd�ly a to i pro Windows.\n"
-"\n"
-"Kliknut�m na \"Zru�it\" zru��te tuto operaci bez ztr�ty dat a odd�l� na "
-"disku."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Nelze na��st moduly pro j�dro odpov�daj�c� instalovan�mu j�dru (chyb� "
-"soubor\n"
-"%s), co� obecn� znamen�, �e spou�t�c� disketa nem� j�dro stejn� jako m� "
-"instala�n� m�dium (vytvo�te pros�m novou spou�t�c� disketu)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Mus�te tak� naform�tovat %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Vybrali jste pro instalaci n�sleduj�c� server(y): %s\n"
-"\n"
-"\n"
-"Tyto servery budou standardn� aktivov�ny. P�esto�e nen� zn�m� ��dn�\n"
-"bezpe�nostn� probl�m, mohou se p�esto vyskytnout. Je proto d�le�it� "
-"aktualizovat\n"
-"v�dy, kdy� je to pot�eba.\n"
-"\n"
-"\n"
-"Chcete opravdu nainstalovat tyto servery?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nelze pou��t v�esm�rov� vys�l�n� bez NIS dom�ny"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Vlo�te naform�tovanou disketu do %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Tato disketa nen� form�tov�na"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Pokud chcete pou��t ulo�en� v�b�r bal��k�, spus�te instalaci takto: 'linux "
-"defcfg=floppy'"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Chyba p�i �ten� souboru %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"N�kter� ��st va�eho hardware pot�ebuje 'speci�ln�' ovlada�e, aby mohla "
-"pracovat.\n"
-"Dal�� informace m��ete nal�zt na: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Mus�te m�t ko�enov� odd�l.\n"
-"K jeho vytvo�en� mus�te zvolit jeden existuj�c� odd�l\n"
-"(nebo vytvo�it nov�), zvolit 'P��pojn� bod'\n"
-"a nastavit ho na '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Mus�te m�t odkl�dac� odd�l"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nem�te odkl�dac� odd�l\n"
-"\n"
-"Chcete p�esto pokra�ovat?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Mus�te m�t FAT odd�l p�ipojen� na /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Pou��t voln� m�sto"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nen� dostatek m�sta pro vytvo�en� nov�ho diskov�ho odd�lu"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Pou��t existuj�c� odd�l"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nen� zde ��dn� existuj�c� odd�l k pou�it�"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Pou��t Windows odd�l jako loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kter� diskov� odd�l chcete pou��t pro Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Zvolte velikosti"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Velikost ko�enov�ho odd�lu v MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Velikost odkl�dac�ho odd�lu v MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Pou��t voln� m�sto na Windows odd�lu"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Na kter�m odd�lu chcete m�nit velikost?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Po��t�m hranice souborov�ho syst�mu s Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Zm�nu velikost FAT nen� mo�n� prov�st, \n"
-"vyskytla se n�sleduj�c� chyba: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"V� diskov� odd�l s Windows je p��li� fragmentov�n, pou�ijte nejd��ve\n"
-"program 'defrag'"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"VAROV�N�!\n"
-"\n"
-"DrakX nyn� mus� zmen�it odd�l s Windows. Bu�te opatrn�: tato operace je\n"
-"nebezpe�n�. Pokud jste tak ji� neu�inili, m�li byste nejprve ukon�it "
-"instalaci,\n"
-"spustit scandisk ve Windows (pop��pad� i defrag) a potom instalaci znovu "
-"spustit\n"
-"Tak� byste si m�li data z�lohovat. A� si budete jist�, �e chcete pokra�ovat\n"
-"stiskn�te Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Jakou velikost odd�lu chcete nechat pro Windows na"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "diskov�m odd�lu %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Zm�na FAT odd�lu neusp�la: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nejsou zde ��dn� FAT odd�ly, kter� by bylo mo�n� zm�nit (nebo nen� dostatek "
-"m�sta)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Smazat cel� disk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Odstranit Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "M�te v�ce ne� jeden pevn� disk, na kter� chcete instalovat Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "V�ECHNY diskov� odd�ly a data na disku %s budou zru�ena"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Vlastn� rozd�len� disku"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Pou��t fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Nyn� m��ete rozd�lit v� hardisk %s.\n"
-"A� skon��te, nezapome�te ulo�it zm�ny pomoc� 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nem�te dostatek voln�ho m�sta na odd�lu s Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Nem��u naj�t ��dn� voln� m�sto pro instalaci"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Pr�vodce DrakX na�el n�sleduj�c� �e�en�:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Vytv��en� diskov�ch odd�l� selhalo: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Startuji s��"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Zastavuji s��"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Stala se chyba, ale nev�m, jak j� spr�vn� interpretovat.\n"
-"Pokra�ujte na vlastn� riziko."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Zdvojen� p��pojn� bod %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"N�kter� d�le�it� bal��ky nebyly spr�vn� nainstalovan�.\n"
-"Je mo�n�, �e je po�kozen CD disk nebo CD-ROM mechanika.\n"
-"Zkontrolujete to pou�it�m p��kazu \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "V�t� v�s %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nen� dostupn� ��dn� disketov� mechanika"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Za��n�m '%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"V� syst�m m� m�lo syst�mov�ch prost�edk�. P�i instalaci Mandrake Linuxu se\n"
-"m��ete setkat s r�zn�mi probl�my. Pokud se tak stane, zkuste textovou\n"
-"verzi instala�n�ho programu. Ta se spou�t� tak, �e p�i startu\n"
-"z CD mechaniky stisknete 'F1' a pot� nap��ete 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Typ instalace"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Pros�m zvolte jednu z n�sleduj�c�ch instala�n�ch t��d:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Celkov� velikost zvolen�ch bal��k� je p�ibli�n� %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Pokud si p�ejete instalaci na men�� prostor ne� je tento,\n"
-"zvolte si kolik procent bal��k� se m� nainstalovat.\n"
-"\n"
-"Mal� po�et procent nainstaluje pouze ty nejd�le�it�j�� bal��ky, 100%%\n"
-"nainstaluje v�echny zvolen�."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Na va�em hardisku je m�sto pouze pro %d%% t�chto bal��k�.\n"
-"\n"
-"Pokud jich chcete nainstalovat je�t� m�n�, zvolte jin� po�et\n"
-"procent. Mal� po�et procent nainstaluje pouze ty nejd�le�it�j��\n"
-"bal��ky, %d%% nainstaluje maxim�ln� mo�n� mno�stv� bal��k�."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "P�esn�ji si budete moci vybrat v p���t�m kroku"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procent bal��k� k instalaci"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "V�b�r skupiny bal��k�"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "V�b�r jednotliv�ch bal��k�"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Celkov� velikost: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "�patn� bal��ek"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Jm�no: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verze: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Velikost: %d kB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "D�le�itost: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Nem��ete ozna�it tento bal��ek, proto�e pro jeho instalaci nen� dost m�sta"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Tyto bal��ky budou instalov�ny"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Tyto bal��ky budou odebr�ny"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Nem��ete vybrat/nevybrat tento bal��ek"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Toto je nepostradateln� bal��ek, nem��e b�t odstran�n"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nem��ete od-ozna�it tento bal��ek, proto�e je u� nainstalovan�"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Tento bal��ek mus� b�t obnoven\n"
-"Jste si jisti, �e ho nechcete zvolit?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Tento bal��ek mus� b�t obnoven, nem��ete ho nezvolit"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Uk�zat automaticky vybran� bal��ky"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalovat"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Ulo�it/Nahr�t na/z disketu/y"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Aktualizuji v�b�r bal��k�"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minim�ln� instalace"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Vyberte si bal��ky, kter� chcete nainstalovat"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instaluji"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Odhaduji"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Zb�vaj�c� �as "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "�ekejte pros�m, p�ipravuji instalaci"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d bal��k�(y)"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaluji bal��ek %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Potvrdit"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Odm�tnout"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Vym��te pros�m CD!\n"
-"\n"
-"Pros�m vlo�te CD ozna�en� \"%s\" do mechaniky a stiskn�te Ok.\n"
-"\n"
-"Pokud toto CD nem�te, stiskn�te Zru�it a toto CD nebude nainstalov�no."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "P�esto pokra�ovat?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Stala se chyba p�i �azen� bal��k�:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Stala se chyba p�i instalaci bal��k�:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Varov�n�\n"
-"\n"
-"P�e�t�te si pros�m pozorn� n�sleduj�c� term�ny. Pokud s nimi nesouhlas�te,\n"
-"nejste opr�vn�n pokra�ovat v instalaci n�sleduj�c�m CD. Stiskn�te\n"
-"\"Odm�tnout\" pro pokra�ov�n� v instalaci bez tohoto m�dia.\n"
-"\n"
-"\n"
-"N�kter� programy na dal��m CD m�diu nejsou ���eny podle licence GPL �i\n"
-"podobn�. Ka�d� z t�chto program� je ���en podle vlastn� licence a podm�nek.\n"
-"�tete pozorn� tyto licence a podm�nky p�ed t�m, ne� za�nete dan� software\n"
-"pou��vat nebo ���it.\n"
-"N�kter� licence zakazuj� p�en�en�, vytv��en� duplikat� (mimo z�lo�n� "
-"kopii),\n"
-"dal�� ���en�, dekompilaci, reverzn� engineering nebo modifikaci komponent.\n"
-"Ka�d� poru�en� podm�nek okam�it� p�eru�uje va�e pr�va podle dan� licence.\n"
-"I kdy� dan� licence d�vaj� n�jak� pr�va, nen� dovoleno instalovat dan�\n"
-"program na v�ce syst�m�, p�izp�sobovat ho provozu na s�ti. V p��pad�\n"
-"pochybnost� kontaktujte distributora nebo v�robce dan�ho programu.\n"
-"P�enech�n� pr�v t�et�m osob�m nebo kop�rov�n� ��sti komponent �i\n"
-"dokumentace je tak� zak�z�no.\n"
-"\n"
-"\n"
-"V�echna pr�va na programy na dal��m CD m�diu pat�� jej�m pr�voplatn�m\n"
-"vlastn�k�m podle autorsk�ho z�kona.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Stala se chyba"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Chcete opravdu ukon�it instalaci?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Souhlas s licenc�"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Uvod\n"
-"\n"
-"Operacni system a ruzne casti dostupne v distribuci Mandrake Linux jsou "
-"nazyvany \"Softwarove produkty\" (\"Software Products\"). Softwarov� "
-"produkty zahrnuji, ale nejsou omezeny, na programy, metody pravidla a "
-"dokumentaci vztahujici se k operacnimu systemu a dalsim komponentam "
-"distribuce Mandrake Linux.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Kl�vesnice"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Vyberte si rozlo�en� va�� kl�vesnice."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Zde je kompletn� seznam dostupn�ch kl�vesnic"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Kter� typ instalace chcete?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalace/Aktualizace"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Je to instalace nebo aktualizace?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Doporu�en�"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expertn�"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Aktualizovat"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Aktualizovat pouze bal��ky"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Vyberte si typ va�� my�i."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "P�ipojen� my�i"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Ke kter�mu s�riov�mu portu je p�ipojena va�e my�?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulace tla��tek"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulace 2 tla��tka"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulace 3 tla��tka"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Nastavuji PCMCIA karty..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Nastavuji IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nejsou dostupn� ��dn� diskov� odd�ly"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Hled�m odd�ly, kter� lze p�ipojit"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Zvolte si p��pojn�(mount) body"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nem��u p�e��st va�i tabulku odd�l�, je pro m� p��li� poru�en� :(\n"
-"M��u se pokusit pokra�ovat v �i�t�n� �patn�ch odd�l� (V�ECHNA\n"
-"DATA budou ztracena!). Jin� mo�nost je zak�zat DrakX m�nit tabulku\n"
-"odd�l� (chyba je %s)\n"
-"\n"
-"Souhlas�te s t�m, �e p��jdete o v�echny odd�ly?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake neusp�l p�i �ten� tabulky odd�l�.\n"
-"Pokra�ujte pouze na vlastn� riziko!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Pro bootstrap nen� pot�ebn� m�sto o velikosti 1MB! Instalace m��e pokra�ovat "
-"ale pro spu�t�n� syst�mu mus�te vytvo�it bootstrap odd�l pomoc� DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Nebyl nalezen ko�enov� odd�l pro proveden� aktualizace"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Ko�enov� odd�l"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Kter� diskov� odd�l je ko�enov� (/) ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Mus�te restartovat po��ta� aby se projevily zm�ny v tabulce odd�l�"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Zvolte diskov� odd�ly kter� chcete naform�tovat"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Otestovat na vadn� stopy?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Form�tuji odd�ly"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Vytv���m a form�tuji soubor %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nen� dostatek odkl�dac�ho prostoru k instalaci, pros�m p�idejte n�jak�"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Hled�m dostupn� bal��ky"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Vyhled�v�m bal��ky pro aktualizaci"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Na va�em syst�mu nen� dostatek m�sta pro instalaci nebo aktualizaci (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Kompletn� (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minim�ln� (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Doporu�en� (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vyberte si, zda chcete ulo�it nebo nahr�t v�b�r bal��k� na disketu.\n"
-"Form�t v�b�ru je stejn� jako form�t automaticky generovan� diskety."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Nahr�t z diskety"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Nahr�v�m z diskety"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "V�b�r bal��k�"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Vlo�te disketu obsahuj�c� v�b�r bal��k�"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Ulo�it na disketu"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Velikost vybran�ch bal��k� je v�t�� ne� m�sto na disku"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Typ instalace"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Nevybrali jste ��dnou skupinu bal��k�\n"
-"Vyberte si pros�m alespo� minim�ln� instalaci"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "X prost�ed�"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Z�kladn� dokumentace (doporu�eno!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Opravdu minim�ln� instalace (speci�ln� bez urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Pokud m�te v�echna CD vypsan� n��e, klepn�te na Ok.\n"
-"Pokud nem�te ��dn� z nich, klepn�te na Zru�it.\n"
-"Pokud V�m chyb� pouze n�kter� z nich, odzna�te je, a zvolte Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM ozna�en� \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "P�ipravuji instalaci"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaluji bal��ek %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Nastaven� po instalaci"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Vlo�te pros�m spou�t�c� disketu do %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Vlo�te pros�m disketu s moduly do %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Nyn� si m��ete st�hnout �ifrovac� software.\n"
-"\n"
-"VAROV�N�:\n"
-"\n"
-"Kv�li r�zn�m obecn�m po�adavk�m a na��zen�m r�zn�ch soudn�ch ��ad�,\n"
-"vztahuj�c�m se na tento druh software, by se m�l z�kazn�k a/nebo koncov�\n"
-"u�ivatel ujistit, zda mu jeho soudn� spr�va umo��uje st�hnout si, ulo�it\n"
-"a pou��vat tento software.\n"
-"\n"
-"Z�kazn�k a/nebo koncov� u�ivatel by si m�l b�t v�dom� toho, �e nesm�\n"
-"p�estupovat z�kony sv� jurisdikce. Pokud z�kazn�k a/nebo koncov� u�ivatel\n"
-"nebude respektovat ustanoven� vztahuj�c�ch se z�kon�, m��e se vystavit\n"
-"postihu.\n"
-"\n"
-"V ka�d�m p��pad� se Mandrakesoft i jeho v�robny a dodavatel� vzd�vaj�\n"
-"jak�koliv zodpov�dnosti za p��m� i nep��m� �kody (v�etn� ztr�ty zisk�,\n"
-"p�eru�en� podnik�n�, ztr�ty obchodn�ch informac�, jako�to i jin�ch "
-"pen�n�ch\n"
-"ztr�t a eventu�ln�ch postih�, po�adavk� na od�kodn�n� a �alob) vznikl�\n"
-"vlastnictv�m, pou��v�n�m nebo pouh�m stahov�n�m tohoto software, ke kter�mu\n"
-"m��e m�t z�kazn�k a/nebo nebo koncov� u�ivatel p��stup kdy� odsouhlas�\n"
-"tuto dohodu.\n"
-"\n"
-"\n"
-"Pokud m�je jak�koliv dotazy vztahuj�c� se k t�to dohod�, kontaktujte pros�m\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Nyn� m�te mo�nost st�hnout aktualizovan� bal��ky, kter� byly\n"
-"uvoln�ny po vyd�n� distribuce.\n"
-"\n"
-"M��ete tak z�skat bezpe�nostn� opravy �i opravy chyb, ale\n"
-"pot�ebujete p�ipojen� k Internetu.\n"
-"\n"
-"Chcete nainstalovat aktualizace?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Kontaktuji web Mandrake Linux pro z�sk�n� seznamu dostupn�ch zrcadel"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Zvolte si zrcadlo(mirror) pro stahov�n� bal��k�"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Stahuji ze zrcadla(mirror) seznam dostupn�ch bal��k�"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Jak� je va�e �asov� p�smo?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardwarov� hodiny nastaveny na GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatick� synchronizace �asu (pomoc� NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Vzd�len� CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Bez tisk�rny"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "M�te n�jakou zvukovou kartu na ISA sb�rnici?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Pro nastaven� zvukov� karty spus�te po instalaci \"sndconfig\"."
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nebyla nalezena zvukov� karta. Zkuste spustit po instalaci \"harddrake\"."
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Souhrn"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "My�"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "�asov� z�na"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Tisk�rna"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN karta"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Zvukov� karta"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV karta"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lok�ln� soubory"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Hlavn�(root) heslo"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez hesla"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Toto heslo je p��li� jednoduch� (mus� b�t alespo� %d znak� dlouh�)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Ov��en�"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Ov��en� pomoc� LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "Z�kladn� dn pro LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Ov��en� pomoc� NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS Dom�na"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Pomoc� startovac� diskety je mo�n� spustit syst�m Linux bez z�vislosti na\n"
-"zavad��i syst�mu. To je u�ite�n� t�eba v p��pad�, �e nechcete instalovat "
-"SILO\n"
-"na po��ta�, nebo jin� opera�n� syst�m SILO p�epsal nebo SILO nepracuje "
-"spr�vn�\n"
-"s hardwarovou konfigurac�. Vlastn� startovac� disketa je tak� u�ite�n� "
-"tehdy,\n"
-"pokud je pot�eba prov�st opravu syst�mu po p�edchoz�m selh�n�.\n"
-"\n"
-"Pokud chcete vytvo�it startovac� disketu, vlo�te disketu do mechaniky\n"
-"a stiskn�te \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "prvn� mechaniky"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "druh� mechaniky"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "P�esko�it"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Pomoc� startovac� diskety m��ete spustit Linux bez pou�it� norm�ln�ho\n"
-"zav�d�c�ho programu (bootloader). To je u�ite�n� pokud nechcete instalovat\n"
-"LILO (nebo Grub), nebo jin� opera�n� syst�m odstran� LILO, nebo LILO\n"
-"na va�em po��ta�i nefunguje. Vlastn� startovac� disketa tak� m��e b�t\n"
-"pou�ita spolu s \"Mandrake z�chrann�m diskem\" (rescue image), co� "
-"poskytuje\n"
-"��innou pomoc p�i hav�rii syst�mu. Chcete vytvo�it startovac� disketu?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(VAROV�N�! Pro ko�enov� odd�l pou��v�te XFS, vytvo�en� \n"
-"spou�t�c� diskety bude z�ejm� ne�sp�n�, proto�e XFS\n"
-"pot�ebuje velmi velk� ovlada�)"
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Bohu�el nen� dostupn� ��dn� disketov� mechanika"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Zvolte mechaniku, kde chcete vytvo�it startovac� disketu"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Vlo�te disketu do %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Vytv���m startovac� disketu"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "P�ipravuji zav�d�c� program"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Zd� se, �e m�te n�jak� nezn�m� po��ta�,\n"
-"na kter�m nebude yaboot pracovat.\n"
-"Instalace bude pokra�ovat, ale budete\n"
-"pot�ebovat BootX pro spu�t�n� syst�mu."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Chcete pou��t aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Stala se chyba p�i instalaci aboot,\n"
-"m�m se pokusit o instalaci i kdy� to zru�� prvn� odd�l na disku?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instaluji zav�d�c� program"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalace zav�d�c�ho programu neusp�la. Stala se tato chyba:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"M��ete pot�ebovat zm�nit startovac� za��zen� pro Open Firmware\n"
-" pro aktivaci spou�t�c�ho programu. Pokud nevid�te po spu�t�n� prompt,\n"
-" stiskn�te p�i startu Command-Option-O-F a zadajte:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Potom zadejte: shut-down\n"
-"P�i dal��m spu�t�n� u� uvid�te prompt."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Vlo�te pr�zdnou disketu do %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Vytv���m disketu pro automatickou instalaci"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"N�kter� kroky nebyly dokon�eny.\n"
-"\n"
-"Chcete opravdu nyn� skon�it?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulujeme v�m, instalace je dokon�ena.\n"
-"Vyjm�te startovac� m�dia a stiskn�te return pro restart.\n"
-"\n"
-"\n"
-"Na opravy t�to instalace syst�mu Mandrake Linux se lze informovat\n"
-"na str�nce Errata:\n"
-"\n"
-"\n"
-"http://www.mandrakelinux.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informace o konfiguraci syst�mu po instalaci jsou dostupn�\n"
-"v dan� kapitole ofici�ln� u�ivatelsk� p��ru�ky pro Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Vytvo�it disketu pro automatickou instalaci"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Instalace m��e b�t v p��pad� pot�eby pln� automatick�,\n"
-"ale pou�ije se cel� disk!!!\n"
-"(v p��pad� instalace na druh� po��ta�)\n"
-"\n"
-"Takto lze jednodu�e zopakovat instalaci.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automaticky"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Zopakovat"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Ulo�it v�b�r jednotliv�ch bal��k�"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Instalace %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> p�epn. mezi prvky | <Space> v�b�r   | <F12> dal�� obraz."
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "chyb� kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "chyb� consolehelper"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Vyberte soubor"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Roz���en�"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Z�kladn�"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Pros�m po�kejte"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informace"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Rozbal v�tev"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sbal v�tev"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "P�epnut� mezi abecedn�m a skupinov�m �azen�m"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "�patn� volba, zkuste to znovu\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Va�e volba? (v�choz� %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Polo�ky, kter� je pot�eba vyplnit:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Va�e volba? (0/1, v�choz� '%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Tla��tko '%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Chcete kliknout na toto tla��tko? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Va�e volba? (v�choz� '%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Je zde v�ce voleb, ze kter�ch je mo�n� si vybrat (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Vyberte si pros�m prvn� ��slo z v�b�ru, kter� chcete editovat,\n"
-"nebo stiskn�te Enter pro pokra�ov�n�.\n"
-"Va�e volba? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Oznamuji zm�nu n�v�t�:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Znovu odeslat"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "�esk� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "N�meck�"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvo��k"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "�pan�lsk�"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finsk�"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francouzsk�"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norsk�"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polsk�"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rusk�"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "�v�dsk�"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK-Britsk�"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US-Americk�"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Alb�nsk�"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Arm�nsk� (star�)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Arm�nsk� (psac� stroj)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Arm�nsk� (foneticky)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "�zerbajd��nsk� (latinka)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgick�"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulharsk� (foneticky)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulharsk� (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilsk� (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "B�lorusk�"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "�v�carsk� (N�meck� styl)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "�v�carsk� (Francouzsk� styl)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "�esk� (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "N�meck� (bez mrtv�ch kl�ves)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "D�nsk�"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvo��k (US) "
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvo��k (Norsk�)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvo��k (�v�dsk�) "
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonsk�"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruz�nsk� (\"Rusk�\" rozlo�en�)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruz�nsk� (rozlo�en� \"Latin\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "�eck�"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ma�arsk�"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Chorvatsk�"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraelsk�"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Izraelsk� (foneticky)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "�r�nsk�"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandsk�"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italsk�"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japonsk� 106 kl�ves"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korejsk� kl�vesnice"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinsko-Americk�"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litevsk� AZERTY (star�)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litevsk� AZERTY (nov�)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litevsk� \"��seln� �ada\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litevsk� \"foneticky\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latevsk�"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonsk�"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandsk�"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polsk� (rozlo�en� QWERTY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polsk� (rozlo�en� QWERTZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugalsk�"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadsk� (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumunsk� (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumunsk� (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rusk� (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovinsk�"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovensk� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovensk� (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Srbsk� (cyrilice)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamilsk�"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thajsk�"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tad�isk� kl�vesnice"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tureck� (tradi�n� model \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tureck� (modern� model \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrajinsk�"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US (mezin�rodn�)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamsk� \"��seln� �ada\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugosl�vsk� (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Prav� kl�vesa Alt"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Ob� kl�vesy Shift sou�asn�"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Control a Shift sou�asn�"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Kl�vesa CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl a Alt sou�asn�"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt a Shift sou�asn�"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Kl�vesa \"Menu\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Lev� kl�vesa \"Windows\""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Prav� kl�vesa \"Windows\""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Propleten� p��pojn� body %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Odeberte nejd��ve logick� disky\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Podpora PCMCIA ji� nen� dostupn� pro kernely 2.2. Pou�ijte pros�m �adu 2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - my�"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Standardn� PS2 my� s kole�kem"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 tla��tko"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Standardn� dvoutla��tkov� my�"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Obecn�"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "S kole�kem"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "S�riov�"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Standardn� t��tla��tkov� my�"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech s�rie CC (s�riov�)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (s�riov�, star� C7 typ)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "Busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 tla��tka"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 tla��tka"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "��dn�"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Bez my�i"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Vyzkou�ejte pros�m, zda funguje my�"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Vyzkou�ejte na my�i,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "TO�IT KOLE�KEM!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Ukon�it"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Dal�� ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- P�edchoz�"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Je to spr�vn�?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "P�ipojen� k Internetu"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Nejb�n�ji se pro p�ipojen� pomoc� adsl pou��v� pppoe.\n"
-"N�kter� p�ipojen� pou��vaj� pptp, n�kter� pouze dhcp. Jestli si nejste "
-"jist�, zvolte 'pou��t pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "pou��t dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pou��t pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pou��t pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Kter�ho dhcp klienta chcete pou��t?\n"
-"Standardn� je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ve va�em po��ta�i nebyl nalezen ��dn� s��ov� adapt�r.\n"
-"Nemohu nastavit typ spojen�."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Zvolte s��ov� rozhran�"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Vyberte si pros�m, kter� s��ov� adapt�r chcete pou��t pro p�ipojen� k "
-"internetu"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nebyla nalezena s��ov� karta"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Nastavuji s��"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Pros�m zadejte jm�no va�eho po��ta�e, proto�e ho vy�aduj� n�kter�\n"
-"DHCP servery. Toto jm�no mus� b�t �pln�, jako nap��klad\n"
-"'mybox.mylab.myco.com'."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Jm�no po��ta�e"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Pr�vodce nastaven�m s�t�"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Extern� ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Intern� ISDN karta"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Jak� je va�e ISDN p�ipojen�?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Kterou ISDN konfiguraci preferujete?\n"
-"\n"
-"* Starou, pou�itou pro isd4net. Ta obsahuje v�konn� n�stroje,\n"
-"  ale je choulostiv� na konfiguraci a nen� standardn�.\n"
-"\n"
-"* Novou konfiguraci, snaz�� pro porozum�n�, v�ce standardn�,\n"
-"  ale s m�n� n�stroji.\n"
-"\n"
-"Doporu�ujeme vybrat si snaz�� novou konfiguraci.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nov� konfigurace (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Star� konfigurace (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Nastaven� ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Vyberte si sv�ho poskytovatele internetu.\n"
-" Pokud nen� na seznamu, vyberte si Jin�"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Evropsk� protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Evropsk� protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol pou�it� ve zbytku sv�ta"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol pou�it� ve zbytku sv�ta \n"
-" ��dn� D-kan�l (leased lines)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Kter� protokol chcete pou��t?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Jak� typ karty m�te?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Nev�m"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Jestli m�te ISA kartu, m�ly by b�t hodnoty na n�sleduj�c� obrazovce "
-"spr�vn�.\n"
-"\n"
-"Jestli m�te PCMCIA kartu, mus�te zn�t jej� IRQ a IO.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "P�eru�it"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Pokra�ovat"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Kterou z t�chto ISDN karet m�te?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Na�el jsem ISDN PCI kartu, jej�� typ ale nezn�m. Pros�m zvolte si jednu z "
-"n�sleduj�c�ho seznamu PCI karet."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nena�el jsem ��dnou ISDN PCI kartu. Pros�m zvolte si jednu z n�sleduj�c� "
-"nab�dky"
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Ke kter�mu s�riov�mu portu je v� modem p�ipojen?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Mo�nosti vyt��en�"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Jm�no p�ipojen�"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonn� ��slo"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "P�ihla�ovac� jm�no"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Podle sc�n��e"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Pomoc� termin�lu"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Jm�no dom�ny"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Prvn� DNS Server (nepovinn�)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Druh� DNS Server (nepovinn�)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"M��ete se odpojit nebo p�ekonfigurovat p�ipojen�."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"M��ete p�ekonfigurovat p�ipojen�."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "V sou�asnosti jste p�ipojeni k Internetu"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Nem��ete se p�ipojit k Internetu nebo p�ekonfigurovat p�ipojen�."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "V sou�asnosti nejste p�ipojeni k Internetu."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "P�ipojit"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Odpojit"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Nastavit p�ipojen�"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Nastaven� a p�ipojen� k internetu"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Nyn� se p�ipravuje konfigurace %s p�ipojen�."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Nyn� se bude konfigurovat p�ipojen� %s.\n"
-"\n"
-"\n"
-"Stiskn�te OK pro pokra�ov�n�."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Nastaven� s�t�"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Proto�e prov�d�te instalaci po s�ti, je ji� s�� nastavena.\n"
-"Klikn�te na Ok pro zachov�n� nastaven� nebo klikn�te na Zru�it pro nov� "
-"nastaven� p�ipojen� Internetu a k s�ti.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"V�t� v�s pr�vodce p�ipojen�m k s�ti\n"
-"\n"
-"Nyn� lze nastavit p�ipojen� k s�ti nebo internetu.\n"
-"Pokud nechcete pou��t automatickou detekci, odzna�te pol��ko.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Zvolte profil pro nastaven�"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Pou��t autodetekci"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detekuji za��zen�..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Modemov� p�ipojen�"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detekov�no na portu %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN p�ipojen�"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detekov�no %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL p�ipojen�"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detekov�no na rozhran� %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabelov� p�ipojen�"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "detekov�no kabelov� p�ipojen�"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "P�ipojen� k LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "detekovan�(�) s��ov�(�) karta(y)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Zvolte si p�ipojen�, kter� chcete nastavit"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"M�te nastaveno v�ce zp�sob�, jak se p�ipojit k Internetu.\n"
-"Vyberte si jeden, kter� chcete pou��t.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internetov� p�ipojen�"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Chcete se automaticky p�ipojovat po startu po��ta�e?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Nastaven� s�t�"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Je pot�ebn� znovu spustit s��"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Vyskytl se probl�m p�i restartu s�t�: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gratulujeme, konfigurace s�t� a internetu je ukon�ena.\n"
-"\n"
-"Konfigurace bude nyn� aktivov�na.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Doporu�ujeme po tomto kroku restartovat X Window,\n"
-"aby se p�ede�lo probl�m�m se zm�nou jm�na po��ta�e."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Vyskytl se probl�m b�hem konfigurace.\n"
-"Otestujte p�ipojen� k Internetu pomoc� net_monitor nebo mcc. Pokud nen� "
-"spojen� funk�n�, bude pot�eba asi znovu na��st konfiguraci"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"VAROV�N�: Toto za��zen� ji� bylo nastaveno pro p�ipojen� k Internetu.\n"
-"Klikn�te na Ok pro zachov�n� nastaven�.\n"
-"Modifikace n�sleduj�c�ch polo�ek p�ep��e toto nastaven�."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Pros�m zadejte IP nastaven� pro tento po��ta�.\n"
-"Ka�d� polo�ka mus� b�t zad�na jako IP adresa v 'desetinn�' form�\n"
-"(nap��klad 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Nastavuji s��ov� za��zen� %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (ovlada� %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Maska s�t�"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatick� IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa mus� b�t ve form�tu 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Pros�m zadejte jm�no va�eho po��ta�e.\n"
-"Toto jm�no mus� b�t �pln�, jako 'mybox.mylab.myco.com'.\n"
-"Pokud pou��v�te br�nu(gateway), m��ete tak� zadat jej� adresu"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Br�na (nap�. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Za��zen� br�ny(gateway)"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Nastaven� proxy"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Sledovat id s��ov� karty (u�ite�n� u notebook�)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy by m�la b�t http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy by m�la b�t ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Nastaven� Internetu"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Chcete se nyn� pokusit p�ipojit k internetu?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testuji p�ipojen� k internetu..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Po��ta� je nyn� p�ipojen k internetu"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Z bezpe�nostn�ch d�vod� bude spojen� ukon�eno."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Nepoda�ilo se p�ipojit k Internetu.\n"
-"Pokuste se p�ekonfigurovat dan� p�ipojen�."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Nastaven� p�ipojen�"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Pros�m vypl�te nebo zkontrolujte n�sleduj�c� �daje"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ karty"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "DMA karty"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO karty"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 karty"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 karty"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Va�e osobn� telefonn� ��slo"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Jm�no poskytovatele (nap� provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefonn� ��slo poskytovatele"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS poskytovatele �.1 (voliteln�)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS poskytovatele �.2 (voliteln�)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "V�b�r si zemi"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Typ vyt��en�"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Rychlost p�ipojen�"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Prodleva p�ipojen� (vte�iny)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "V� ��et (u�ivatelsk� jm�no)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Heslo va�eho ��tu"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "chyba p�ipojov�n�: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Roz���en� diskov� odd�ly nejsou na tomto syst�mu podporov�ny"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Ve tabulce diskov�ch odd�l� je mezera, ale nemohu ji pou��t.\n"
-"Jedin� �e�en� je p�esunout prim�rn� odd�ly tak, abyste m�li mezeru vedle\n"
-"roz���en�ch odd�l�."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Obnova ze souboru %s neusp�la: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "�patn� z�lo�n� soubor"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Chyba p�i zapisov�n� do souboru %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"N�co �patn�ho se stalo s pevn�m diskem. \n"
-"Test na integritu dat selhal. \n"
-"To znamen�, �e z�pis na tento disk m��e skon�it nep�edv�dan�"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "mus�te m�t"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "d�le�it�"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "nejm�n� d�le�it�"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "ned�le�it�"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "m��e se hodit"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Tiskov� Syst�m pro Unix"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nov� generace"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - D�mon pro tisk�rny"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Tisk bez ukl�d�n� do fronty"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "M�stn� tisk�rna"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Vzd�len� tisk�rna"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Tisk�rna na vzd�len�m CUPS serveru"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Tisk�rna na vzd�len� lpd serveru"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "S��ov� tisk�rna (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Tisk�rna na serveru Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Tisk�rna na Netware serveru"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Zadejte URI tiskov�ho za��zen�"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Poslat tiskovou �lohu do p��kazu"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Nezn�m� model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "M�stn� tisk�rny"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Vzd�len� tisk�rny"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " na paraleln�m portu \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB tisk�rna \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", multifunk�n� na paraleln�m portu \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", multifunk�n� za��zen� na USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multifunk�n� za��zen� na HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", multifunk�n� za��zen�"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", p�i tisku na %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "na LPD serveru \"%s\", tisk�rna \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP hostitel \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "na serveru Windows \"%s\", sd�len� jako \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "na severu Novell \"%s\", tisk�rna \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", pou��v� p��kaz %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "P��m� tisk (bez ovlada�e)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(na tomto po��ta�i)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na serveru CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (V�choz�)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Zvolte p�ipojen� tisk�rny"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Jak je tisk�rna p�ipojena?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"V p��pad� vzd�len�ho CUPS serveru nemus�te nastavovat tisk�rny zde,\n"
-"tisk�rny budou automaticky detekov�ny."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Nastaven� CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Zadejte CUPS server"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"P�i tisku na vzd�len� CUPS server v lok�ln� s�ti nen� pot�eba nic "
-"nastavovat, CUPS server bude automaticky informovat o jeho tisk�rn�ch. "
-"V�echny zn�m� tisk�rny pro tento po��ta� jsou nyn� vyps�ny v poli \"Vzd�len� "
-"tisk�rny\". v hlavn� sekci n�stroje Printerdrake. Pokud je CUPS na jin� "
-"s�ti, mus�te pro z�sk�n� informac� zadat IP adresu CUPS serveru a tak� "
-"p��padn� ��slo portu, jinak nechte toto pole pr�zdn�."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Ve v�t�in� p��pad� je CUPS automaticky spr�vn� nastaven v z�vislosti na\n"
-"s��ov�m prost�ed� tak, aby bylo mo�n� tisknout na tisk�rn�ch um�st�n�ch\n"
-"na CUPS serverech v s�ti. Pokud je nastaven� nespr�vn�, vypn�te\n"
-"\"Automatick� nastaven� pro CUPS\" a editujte soubor /etc/cups/cupsd.conf\n"
-"ru�n�. Nezapome�te potom CUPS restartovat (p��kaz: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa mus� b�t ve form�tu 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "��slo portu mus� b�t cel� ��slo!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP adresa CUPS serveru"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatick� nastaven� pro CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Detekuji za��zen� ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Otestovat porty"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "P�idat novou tisk�rnu"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"V�tejte v pr�vodci nastaven�m tisku\n"
-"\n"
-"Tento pr�vodce v�m pom��e nainstalovat lok�ln� nebo vzd�len� tisk�rnu(y), "
-"kter� je mo�n� n�sledn� vyu��t na vzd�len�m po��ta�i na s�ti.\n"
-"\n"
-"Budete dot�z�ni na v�echny pot�ebn� informace pro nastaven� tisk�rny, m��ete "
-"si vybrat se v�ech tiskov�ch ovlada�� a typ� p�ipojen� tisk�rny."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "M�stn� tisk�rna"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"V�tejte v pr�vodci nastaven�m tisku\n"
-"\n"
-"Tento pr�vodce v�m pom��e nainstalovat tisk�rnu(y), kter� je p�ipojena k "
-"tomuto po��ta�i.\n"
-"\n"
-"P�ipojte pros�m tisk�rnu(y) k po��ta�i a zapn�te ji. Pokud je v�e "
-"p�ipraveno, klikn�te na tla��tko \"Dal��\" nebo na tla��tko \"Zru�it\", "
-"pokud tisk�rnu nechcete nyn� nastavit.\n"
-"\n"
-"M��e se st�t, �e n�kter� po��ta�e mohou zatuhnout p�i automatick� detekci a "
-"tehdy lze pou��t \"Expertn� re�im\" pro instalaci bez automatick� detekce. "
-"\"Expertn� re�im\" pou�ijte tak� tehdy, pokud chcete nastavit vzd�lenou "
-"tisk�rnu(y) a printerdrake ji/je automaticky nenab�dnul."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Automatick� detekce tisk�ren"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Blahop�ejeme, tisk�rna je instalov�na a nastavena!\n"
-"\n"
-"Tisknout z aplikac� lze p��kazem \"Tisk\" (oby�ejn� v menu \"Soubor\").\n"
-"\n"
-"Pokud chcete p�idat, odebrat, p�ejmenovat tisk�rnu nebo zm�nit jej� v�choz� "
-"hodnoty (typ z�sobn�ku, kvalita tisku,...), zvolte \"Tisk�rna\" v sekci "
-"\"Hardware\" v ��d�c�m centru Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatick� detekce tisk�ren"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake dok�e automaticky detekovat tisk�rny p�ipojen� p�es paraleln� "
-"nebo USB rozhran�, ale na n�kter�ch syst�mech m��e automatick� detekce "
-"ZMRAZIT SYST�M A TAK� PO�KODIT SOUBORY! Prov�d�te to tedy na VLASTN� "
-"NEBEZPE��!\n"
-"\n"
-"Chcete opravdu pou��t automatickou detekci tisk�rny?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Prov�st autodetekci"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Nastavit tisk�rnu manu�ln�"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Detekov�no %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Tisk�rna na paraleln�m portu \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB tisk�rna \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Lok�ln� tisk�rna nenalezena! Pro ru�n� instalaci tisk�rny zadejte jm�no "
-"za��zen�/souboru do pol��ka (Paraleln� porty: /dev/lp0, /dev/lp1,... jsou "
-"ekvivalentn� LPT1:, LPT2:, ...,prvn� USB tisk�rna: /dev/usb/lp0, druh� USB "
-"tisk�rna: /dev/usb/lp1,...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Mus�te zadat za��zen� nebo jm�no souboru!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"M�stn� tisk�rna nenalezena!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"S��ov� tisk�rny mohou b�t nainstalov�ny a� po instalaci syst�mu. V ��d�c�m "
-"centru Mandrake vyberte \"Hardware\" a potom \"Tisk�rna\"."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Pro instalaci s��ov�ch tisk�ren klikn�te nejd��ve na \"Zru�it\", p�ejd�te do "
-"\"Expertn�ho re�imu\" a potom op�t klikn�te na \"P�idat novou tisk�rnu\"."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Tyto tisk�rny byly automaticky detekov�ny, pokud nen� mezi nimi po�adovan� "
-"tisk�rna, zadejte do pol��ka jm�no za��zen�/jm�no souboru"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Zde je seznam v�ech automaticky rozpoznan�ch tisk�ren. Vyberte si tisk�rnu, "
-"kterou chcete nastavit nebo zadejte do pol��ka jm�no za��zen�/jm�no souboru"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Byla automaticky detekov�na tato tisk�rna. Konfigurace t�to tisk�rny je pln� "
-"automatick�. Pokud nebyla tisk�rna spr�vn� detekov�na nebo preferujete "
-"vlastn� nastaven� tisku, zvolte \"Ru�n� konfigurace\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Tyto tisk�rny byly automaticky detekov�ny. Konfigurace t�chto tisk�ren je "
-"pln� automatick�. Pokud nebyla tisk�rna spr�vn� detekov�na nebo preferujete "
-"vlastn� nastaven� tisku, zvolte \"Ru�n� konfigurace\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Vyberte si port, ke kter�mu je tisk�rna p�ipojena nebo zadejte do pol��ka "
-"jm�no za��zen�/jm�no souboru"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Vyberte port, ke kter�mu je va�e tisk�rna p�ipojena."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Paraleln� porty: /dev/lp0, /dev/lp1,... je ekvivalentn� LPT1:, LPT2:, ...,"
-"prvn� USB tisk�rna: /dev/usb/lp0, druh� USB tisk�rna: /dev/usb/lp1,...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Mus�te vybrat/zadat tisk�rnu/za��zen�!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Ru�n� nastaven�"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Je va�e tisk�rna multifunk�n� za��zen� od HP (OfficeJet, PSC, PhotoSmart "
-"LaserJet 1100/1200/1220/3200/3300 se skenerem)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Instaluji bal��ek HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Testuj� za��zen� a nastavuji HPOJ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Instaluji bal��ek SANE..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skenov�n� na multifunk�n�m za��zen� od HP"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Zp��stup�uji tiskov� port pro CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Na��t�m datab�zi tisk�ren ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Mo�nosti vzd�len� lpd tisk�rny"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Abyste mohli pou��vat vzd�lenou tiskovou frontu lpd, mus�te zadat jm�no "
-"tiskov�ho serveru a jm�no tisk�rny, kam m� b�t pos�l�n tisk."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Jm�no vzd�len�ho po��ta�e"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Jm�no vzd�len� tisk�rny"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Chyb� jm�no vzd�len�ho po��ta�e!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Chyb� jm�no vzd�len� tisk�rny!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Mo�nosti SMB (Windows 9x/NT) tisk�rny"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Abyste mohli tisknout na SMB tisk�rn�, mus�te zadat jm�no SMB po��ta�e"
-"(Pozor! To m��e b�t odli�n� od jeho TCP/IP jm�na) a mo�n� i IP adresu "
-"tiskov�ho serveru, jm�no sd�len� tisk�rny, vhodn� u�ivatelsk� jm�no, heslo a "
-"informace o pracovn� skupin�."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Jm�no SMB serveru"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP adresa SMB serveru"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Sd�len� jm�no"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Pracovn� skupina"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Mus� b�t zad�no bu� jm�no serveru nebo jeho IP adresa!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Chyb� jm�no pro sd�len� p�es Sambu!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "BEZPE�NOSTN� VAROV�N�!"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Prov�d�te nastaven� tisku s ��tem na syst�mu Windows. Kv�li chyb� v klientu "
-"protokolu Samba je heslo p�i tisku posl�no jako �ist� text z p��kazov� "
-"�adky. Je tud�� mo�n�, aby kdokoliv vid�l toto heslo na obrazovce kdy� si "
-"zad� p��kaz nap�. \"ps auxwww\".\n"
-"\n"
-"Doporu�ujeme pou��vat jednu z n�sleduj�c�ch alternativ (ve v�ech p��padech "
-"je dobr� m�t nastaven p��stup pouze z po��ta�� z lok�ln� s�t�, respektiv� za "
-"firewalem):\n"
-"\n"
-"Pou��t ��et, kter� nem� nastaven ��dn� heslo, jako je \"GUEST\" nebo "
-"speci�ln� ��et pouze pro ��ely tisku. Neodstra�ujte ochranu heslem z b�n�ho "
-"��tu nebo dokonce z administr�torsk�ho ��tu.\n"
-"\n"
-"Nastavte tisk�rnu na Windows serveru tak, aby fungovala pod LPD protokolem. "
-"Potom nastavte tisk na t�to tisk�rn� pomoc� typy spojen� \"%s\" v aplikaci "
-"Printerdrake.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Nastavit na serveru s Windows tisk�rnu, kter� bude p��stupn� pomoc� IPP "
-"protokolu a nastavit tisk z tohoto po��ta�e pomoc� spojen� \"%s\" v aplikaci "
-"Printerdrake.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"P�ipojit tisk�rnu k Linux serveru a nechat po��ta�(e) s Windows pracovat "
-"jako klienty.\n"
-"\n"
-"Chcete opravdu pokra�ovat v nastaven� tisk�rny t�mto zp�sobem?"
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Mo�nosti NetWare tisk�rny"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Abyste mohli tisknout na NetWare tisk�rn�, mus�te zadat jm�no NetWare "
-"serveru (Pozor! To m��e b�t odli�n� od jeho jm�na pro TCP/IP!), jm�no "
-"tiskov� fronty tisk�rny, kterou chcete pou��vat, u�ivatelsk� jm�no a heslo."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Tiskov� server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Jm�no tiskov� fronty"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Chyb� jm�no pro sd�len� p�es NCP!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Chyb� jm�no tiskov� fronty pro NCP!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Mo�nosti tisk�rny pro TCP/socket"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Abyste mohli tisknout na TCP nebo socketov� tisk�rn�, mus�te zadat jm�no "
-"po��ta�e s tisk�rnou a voliteln� i ��slo portu. Pokud m�te HP JetDirect, "
-"port je obvykle 9100, jinak se m��e m�nit. Pod�vejte do manu�lu k va�emu "
-"hardware."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Jm�no po��ta�e s tisk�rnou"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Chyb� jm�no po��ta�e s tisk�rnou!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI Tiskov�ho Za��zen�"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Zde lze p��mo zadat URI pro p��stup k tisk�rn�. URI mus� spl�ovat bu� "
-"specifikaci CUPS nebo Foomatic. Taky pamatujte na to, �e v�echny URI nejsou "
-"podporov�ny ve v�ech tiskov�ch spr�vc�ch."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Mus� b�t zad�no spr�vn� URI!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Ka�d� tisk�rna pot�ebuje jm�no (nap�. \"tiskarna\"). Popis a um�st�n� nemus� "
-"b�t vypln�ny. Jsou to koment��e pouze pro u�ivatele."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Jm�no tisk�rny"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Popis"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Um�st�n�"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Na��t�m datab�zi tisk�ren ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Model tisk�rny"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake provedl porovn�n� modelu tisk�rny, kter� byl zji�t�n p�i auto-"
-"detekci s modelem obsa�en�m v jeho datab�zi a nab�dnul nejlep�� �e�en�. Tato "
-"volba m��e b�t �patn�, zvlṻ pokud nen� tisk�rna obsa�ena v datab�zi. "
-"Zkontrolujte, zda je volba spr�vn� a klepn�te na \"Zvolen� model je spr�vn�"
-"\" a pokud nen�, volte \"Vybrat model ru�n�\". V dal�� obrazovce potom bude "
-"mo�n� vybrat model tisk�rny ru�n�.\n"
-"\n"
-"Pro va�i tisk�rnu Printerdrake nalezl:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Zvolen� model je spr�vn�"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Vybrat model ru�n�"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "V�b�r modelu tisk�rny"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Jak� model tisk�rny m�te?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Zkontrolujte pros�m, zda Printerdrake provedl automatickou detekci modelu "
-"spr�vn�. Pokud je vyzna�en nespr�vn� model, m��ete ho zm�nit v�b�rem ze "
-"seznamu nebo zvolte \"Raw printer\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Pokud nen� tisk�rna v seznamu, vyberte kompatibiln� nebo podobn� model "
-"(pod�vejte se do manu�lu)"
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Nastaven� pro OKI win-tisk�rnu"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Nyn� nastavujete laserovou tisk�rnu OKI winprinter. Tyto tisk�rny pou��vaj� "
-"velmi specifick� komunika�n� protokol a mohou pracovat pouze pokud jsou "
-"p�ipojeny k prvn�mu paraleln�mu portu. Pokud je tisk�rna p�ipojena na jin� "
-"port, nebo se tiskne p�es server, p�ipojte tisk�rnu na prvn� paraleln� port. "
-"Jinak tisk nebude pracovat. Typ p�ipojen� bude ovlada� ignorovat."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Nastaven� inkoustov� tisk�rny Lexmark"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkoustov� tisk�rny dod�van� firmou Lexmark podporuj� pouze tisk na lok�ln� "
-"tisk�rn�, tak�e nelze tisknout p�es vzd�len� server. Pros�m p�ipojte "
-"tisk�rnu na lok�ln� port nebo ji nastavte na tom po��ta�i, ke kter�mu bude "
-"p�ipojena."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Aby bylo mo�n� tisknout na inkoustov�ch tisk�rn�ch od firmy Lexmark, je "
-"pot�eba m�t tiskov� ovlada�. Na str�nce (http://www.lexmark.com/) klikn�te "
-"na tla��tko \"Drivers\" a vyberte v� model tisk�rny. Potom zvolte Linux "
-"jako opera�n� syst�m. Ovlada�e jsou v RPM bal��c�ch nebo maj� interaktivn� "
-"instalaci. Tu ale nepot�ebujete. Ukon�ete instala�n� program ihned po "
-"odsouhlasen� licence. Pak m��ete nastavit chov�n� tiskov� hlavy pomoc� "
-"tohoto programu."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"V�choz� nastaven� pro tisk�rnu\n"
-"\n"
-"Ujist�te se, �e typ str�nky a typ inkoustu/re�im tisku (pokud je) a tak� "
-"hardwarov� konfigurace laserov� tisk�rny (pam�, duplexn� jednotka, extern� "
-"podava�) jsou nastaveny spr�vn�. P�i tisku ve velmi vysok� kvalit�/rozli�en� "
-"bude tisk z�ejm� pomalej��."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Hodnota %s mus� b�t cel� ��slo!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Hodnota %s mus� b�t ��slo!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Hodnota %s je mimo rozsah!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Chcete opravdu nastavit tisk�rnu \"%s\"\n"
-"jako v�choz�?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testovac� str�nka"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Vyberte si testovac� str�nku, kterou chcete vytisknout.\n"
-"Pozn�mka: tisk testovac� str�nky s fotografi� m��e trvat velmi dlouho nebo "
-"se na tisk�rn� s m�lo pam�t� nemus� poda�it v�bec. Ve v�t�in� p��pad� sta�� "
-"vytisknout b�nou testovac� str�nku."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Bez testovac� str�nky"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Tisk"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standardn� testovac� str�nka"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternativn� testovac� str�nka (letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternativn� testovac� str�nka (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Testovac� str�nka s fotografi�"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Netisknout testovac� str�nku"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Tisknu testovac� str�nku(y)"
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Zku�ebn� str�nka(y) byla(y) posl�na(y) na tisk�rnu.\n"
-"M��e chvilku trvat ne� za�ne tisk.\n"
-"Stav tisku:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Zku�ebn� str�nka byl posl�na na tisk�rnu.\n"
-"M��e chvilku trvat ne� za�ne tisk.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Prob�hl tisk spr�vn� ?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "P��m� tisk na tisk�rnu"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Vytisknout soubor z p��kazov� ��dky (termin�lov�ho okna) lze bu� p��kazem\n"
-"\"%s<soubor>\" nebo p�es grafick� n�stroje: \"xpp <soubor> nebo \"kprinter "
-"<soubor>\". Grafick� n�stroje umo��uj� jednodu�e vybrat tisk�rny a m�nit "
-"jejich parametry.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Tyto p��kazy lze nastavit do pol��ka \"P��kazy tisku\" v dialogu tisku ve "
-"v�t�in� aplikac�, ale nezad�v� se zde jm�no souboru, kter� je poka�d� jin� v "
-"z�vislosti na dan� aplikaci.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"P��kaz \"%s\" dovoluje modifikovat volby pro ka�dou tiskovou �lohu. "
-"Jednodu�e zadejte pot�ebn� nastaven� do p��kazov� ��dky, nap�. \"%s<soubor>"
-"\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"V�echny mo�nosti pro sou�asnou tisk�rnu jsou zobrazeny n��e, nebo klikn�te "
-"na tla��tko \"Mo�nosti tisk�rny\".%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Zde je seznam dostupn�ch voleb pro nastaven� tisku pro aktu�ln� tisk�rnu:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Pro vyti�t�n� souboru z p��kazov� ��dky (v termin�lov�m okn�) pou�ijte "
-"p��kaz \"%s<soubor>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Tento p��kaz lze nastavit do pol��ka \"P��kazy tisku\" v dialogu tisku ve "
-"v�t�in� aplikac�, ale nezad�v� se zde jm�no souboru, kter� je poka�d� jin� v "
-"z�vislosti na dan� aplikaci.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"V�echny mo�nosti tisku pro sou�asnou tisk�rnu jsou zobrazeny n��e, nebo "
-"klikn�te na tla��tko \"Mo�nosti tisk�rny\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Pro vyti�t�n� souboru z p��kazov� ��dky (v termin�lov�m okn�) pou�ijte "
-"p��kaz \"%s<soubor>\" nebo \"%s<soubor>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Lze tak� pou��t grafick� rozhran� \"xpdq\" pro nastaven� mo�nost� a ke "
-"spr�v�tiskov�ch �loh.\n"
-"Pokud pou��v�te grafick� prost�ed� KDE, m�te na pracovn� plo�e ikonu,\n"
-"pojmenovanou \"STOP Printer!\", kter� po kliknut� ihned zastav� "
-"v�echnytiskov� �lohy. To je vhodn� t�eba pro p��pady uv�znut� pap�ru.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"P��kazy \"%s\" a \"%s\" dovoluj� modifikovat volby pro ka�dou tiskovou "
-"�lohu. Jednodu�e zadejte pot�ebn� nastaven� do p��kazov� ��dky, nap�. \"%"
-"s<soubor>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Zav��t"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Tisknu/skenuji na \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Tisknu na tisk�rnu \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Mo�nosti tisk�rny"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Multifunk�n� za��zen� od HP bylo nastaveno pro mo�nost skenov�n�. Nyn� lze "
-"skenovat p��kazem \"scanimage\" (\"scanimage -d hp:%s\" zvol�te po�adovan� "
-"skener) z p��kazov�ho ��dku nebo z grafick�ho prost�ed� pomoc� \"xscanimage"
-"\" nebo \"xsane\". Pokud pou��v�te program GIMP, m��ete tak� skenovat "
-"v�b�rem z nab�dky \"Soubor\"/\"Z�skat\". V�ce informac� z�sk�te p��kazem "
-"\"man scanimage\" a \"man sane-hp\".\n"
-"\n"
-"Nepou��vejte pro toto za��zen� \"scannerdrake\"!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Multifunk�n� za��zen� od HP bylo nastaveno pro mo�nost skenov�n�. Nyn� lze "
-"skenovat p��kazem \"ptal-hp %s scan ...\" z p��kazov�ho ��dku. Skenov�n� z "
-"grafick�ho prost�ed� nebo z programu GIMP nen� zat�m na tomto za��zen� "
-"podporov�no. V�ce informac� naleznete v souboru \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\". Pokud m�te HP LaserJet 1100 nebo 1200, lze skenovat "
-"pouze v p��pad�, �e m�te nainstalov�nu podporu pro skenov�n�.\n"
-"\n"
-"Nepou��vejte pro toto za��zen� \"scannerdrake\"!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Na��t�m data k tisku ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "P�en�st konfiguraci tisk�rny"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Konfiguraci tisk�rny, kterou jste provedli pro frontu %s lze p�en�st na "
-"frontu %s, tj. na sou�asnou frontu. V�echna nastaven� data (jm�no tisk�rny, "
-"popis, um�st�n�, typ p�ipojen� a dal�� v�choz� nastaven�) budou p�eps�na, "
-"ale tiskov� �lohy nebudou p�eneseny.\n"
-"Ne v�echny fronty lze p�en�st z n�sleduj�ch d�vod�:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS nepodporuje tisk�rny na serverech Novell nebo tisk�rny, kter� pos�laj� "
-"data na skupinu p��kaz�.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podporuje pouze m�stn� tisk�rny, vzd�len� tisk�rny LPD a tisk na "
-"tisk�rny p�es sockety/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ani LPRng nepodporuj� IPP tisk�rny.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Tiskov� fronty, kter� nebyly vytvo�eny t�mto programem nebo p�es \"foomatic-"
-"configure\" nelze p�en�st."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Tak� tisk�rny pou��vaj�c� PPD soubory od jejich v�robc� nebo tisk�rny s "
-"nativn�mi ovlada�i pro CUPS nelze p�en�st."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Ozna�te tisk�rnu, kterou chcete p�en�st a stiskn�te \"P�en�st\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Nep�en�et tisk�rny"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "P�en�st"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Tisk�rna se jm�nem \"%s\" ji� na stran� %s existuje.\n"
-"Klikn�te na \"P�en�st\" pro p�eps�n�.\n"
-"Taky m��ete napsat nov� jm�no nebo ji p�esko�it."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Jm�no fronty m��e obsahovat pouze p�smena, ��slice a podtr��tko"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Tisk�rna se jm�nem %s ji� existuje,\n"
-"chcete opravdu p�epsat jej� konfiguraci?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nov� jm�no tisk�rny"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "P�en��m %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Byla p�enesena v�choz� tisk�rna (\"%s\"). M� se nastavit jako v�choz� tak� "
-"na vzd�len�m tiskov�m syst�mu %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Ob�erstvuji tiskov� data ...."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Nastaven� vzd�len� tisk�rny"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Spou�t�m s�� ...."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Nastavit s�� nyn�"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "S�� nen� nastavena"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Nyn� za�ne konfigurace vzd�len� tisk�rny. To vy�aduje funk�n� s��ov� "
-"spojen�, ale s�� nen� zat�m nastavena. Pokud budete pokra�ovat bez nastaven� "
-"s�t�, nebude mo�n� pou��t tisk�rnu, kterou po�adujete. Jak chcete pokra�ovat?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Pokra�ovat bez nastaven� s�t�"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Nastaven� s�t� proveden� p�i instalaci nelze nyn� aktivovat.  Zkontrolujte, "
-"zda je s�� dostupn� po spu�t�n� syst�mu a nastaven� opravte v ��d�c�m centru "
-"Mandrake, v sekci \"S�� a Internet\"/\"P�ipojen�\" a n�sledn� nastavte "
-"tisk�rnu tak� v ��d�c�m centru v sekci \"Hardware\"/\"Tisk�rna\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"S�� nefunguje a nelze ji spustit. Pros�m zkontrolujte nastaven� hardware. "
-"Pak se op�t pokuste prov�st nastaven� vzd�len� tisk�rny."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Restartuji tiskov� syst�m ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "vysok�"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoidn�"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaluji tiskov� syst�m v bezpe�nostn� �rovni %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Pokou��te se instalovat tiskov� syst�m %s na po��ta�, be��c� v bezpe�nost� "
-"�rovni %s.\n"
-"\n"
-"Tiskov� syst�m pracuje jako d�mon (proces na pozad�), kter� �ek� na tiskov� "
-"�lohy a zpracov�v� je. Tento d�mon je tak� p��stupn� ze s�t� pro jin� "
-"po��ta�e, tak�e se m��e st�t p�edm�tem s��ov�ho �toku. Proto je vybr�no "
-"pouze n�kolik slu�eb, kter� jsou v t�to �rovni spu�t�ny automaticky p�i "
-"startu.\n"
-"\n"
-"Chcete opravdu nastavit tiskov� syst�m na tomto po��ta�i?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Spustit tiskov� syst�m p�i startu syst�mu"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Tiskov� syst�m (%s) nebude automaticky spu�t�n p�i startu po��ta�e.\n"
-"\n"
-"Je mo�n�, �e volba automatick�ho startu byla vypnuta ve vy��� bezpe�nostn� "
-"�rovni, proto�e tiskov� syst�m je potenci�ln� nebezpe�� pro s��ov� �tok.\n"
-"\n"
-"Chcete nastavit zp�t automatick� start tiskov�ho syst�mu?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Ov��uj� nainstalovan� software..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Odeb�r�m LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Odeb�r�m LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Zvolte tiskov� syst�m pro tisk�rnu"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kter� tiskov� syst�m chcete pou��t pro tisk?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Nastavuji tisk�rnu \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Instaluji Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Mo�nosti tisk�rny"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "P�ipravuji PrinterDrake ...."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Nastavov�n� aplikac�..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Cht�li byste nastavit tisk�rnu?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Tiskov� syst�m: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Jsou nastaveny n�sleduj�c� tisk�rny. Dvojit�m kliknut�m na ka�dou z nich je "
-"mo�n� je modifikovat, nastavit jako v�choz�, z�skat o nich informace nebo je "
-"nastavit na vzd�len�m CUPS serveru pro vyu�it� v aplikaci Star Office/"
-"OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Jsou nastaveny n�sleduj�c� tisk�rny. Dvojit�m kliknut�m na ka�dou z nich je "
-"mo�n� je modifikovat, nastavit jako v�choz� nebo o nich z�skat informace."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Obnovit seznam tisk�ren (pro z�sk�n� v�ech vzd�len�ch CUPS tisk�ren)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Zm�na tiskov�ho syst�mu"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Norm�n� re�im"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Chcete nastavit dal�� tisk�rnu?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Zm�nit nastaven� tisk�rny"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Tisk�rna %s\n"
-"Co chcete zm�nit na t�to tisk�rn�?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Prov�st!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Typ p�ipojen� pro tisk�rnu"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Jm�no tisk�rny, popis, um�st�n�"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "V�robce tisk�rny, model, ovlada�"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "V�robce tisk�rny, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Nastavit tuto tisk�rnu jako v�choz�"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "P�idat tuto tisk�rnu do Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Odebrat tisk�rnu ze Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Tisk testovac�(ch) str�nky(nek)"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "N�pov�da pro tisk na t�to tisk�rn�"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Odebrat tisk�rnu"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Odeb�r�m starou tisk�rnu \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "V�choz� tisk�rna"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Tisk�rna \"%s\" je nyn� nastavena jako v�choz�."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "P�id�v�m tisk�rnu do Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Tisk�rna \"%s\" byla �sp�n� p�id�na do Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "P�id�n� tisk�rny \"%s\" do Star Office/OpenOffice.org se nezda�ilo."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Odeb�r�m tisk�rnu ze Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"Tisk�rna \"%s\" byla �sp�n� odebr�na z aplikace Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Odebr�n� tisk�rny \"%s\" ze Star Office/OpenOffice.org se nezda�ilo."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Chcete opravdu odebrat tisk�rnu \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Odeb�r�m tisk�rnu \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Nastaven� proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"V�tejte v konfigura�n�m n�stroji pro proxy.\n"
-"\n"
-"Zde nastavujete http a ftp proxy zad�n�m\n"
-"p�id�len�ho p�ihla�ovac�ho jm�na a hesla\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Zadejte pros�m hodnoty pro http proxy\n"
-"V p��pad�, �e nem�te http proxy, ponechejte pr�zdn�"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL by m�lo b�t 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "��slo portu mus� b�t numerick�"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Zadejte pros�m hodnoty pro ftp proxy\n"
-"V p��pad�, �e nem�te ftp proxy, ponechejte pr�zdn�"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL by m�lo b�t 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Pokud je pot�eba, zadejte pros�m p�ihla�ovac� jm�no\n"
-"a heslo. Pokud je nepot�ebujete, nechte pr�zdn�"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "heslo"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "heslo znova"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Hesla nejsou shodn�. Zkuste to znovu!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nem��u p�idat odd�l do _naform�tovan�ho_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nem��u zapsat soubor %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid neusp�l"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid neusp�l (mo�n�, �e chyb� raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nen� dostatek odd�l� pro RAID �rovn� %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Spustit zvukov� syst�m ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron - spou�t� opakuj�c� se akce"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd je pou��v�n pro sledov�n� stavu baterie a zaznamen�v�n� p�es syslog.\n"
-"M��e tak� b�t pou�it pro vypnut� po��ta�e p�i vybit� baterii."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Spou�t� p��kazy napl�novan� p��kazem na ur�it� �as p��kazem 'at'.\n"
-"Tak� spou�t� p��kazy p�i n�zk�m vyt��en� syst�mu."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardn� Unixov� program kter� spou�t� u�ivatelem zadan� programy\n"
-"v p�edem definovan�ch intervalech. vixie cron m� nav�c mnoho vlastnost�,\n"
-"v�etn� vy��� bezpe�nosti a v�ce mo�nost� nastaven�."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM p�id�v� do textov�ch program� podporu my�i (nap� pro Midnight "
-"Commander).\n"
-"M��e tak� v konzoli prov�d�t operace 'vyjmi' a 'vlo�' a ovl�dat pop-up menu."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake testuje hardware a umo��uje nov�/zm�n�n�\n"
-"hardware nastavit"
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache je WWW server. Je pou��v�n k poskytov�n� HTML a CGI soubor�."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internetov� superserver d�mon (naz�van� inetd) spou�t� mnoho ostatn�ch\n"
-"internetov�ch slu�eb, tak jak jsou zapot�eb�. Odpov�d� za start nap�.\n"
-"telnetu, ftp, rsh a rlogin. Pokud vypnete inetd, vypnete t�m i ostatn�\n"
-"slu�by kter� spou�t�."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Spustit paketov� filtr pro j�dra �ady 2.2, kter� chr�n� po��ta�\n"
-"proti �tok�m ze s�t�."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Tento bal��ek nahraje zvolenou mapu kl�vesnice definovanou\n"
-"v /etc/sysconfig/keyboard. Tu lze vybrat pomoc� n�stroje kbdconfig.\n"
-"Pro v�t�inu po��ta�� byste ji m�li nechat zapnutou."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatick� generace hlavi�ky j�dra v adres��i /boot\n"
-"pro soubory /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatick� detekce a konfigurace hardware p�i spu�t�n�."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf prov�d� r�zn� �koly p�i spu�t�n� syst�mu\n"
-"nutn� pro spr�vu syst�mov� konfigurace."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je tiskov� d�mon, bez kter�ho nebude fungovat lpr (program pro tisk).\n"
-"Je to server, kter� pos�l� ti�t�n� dokumenty jednotliv�m tisk�rn�m."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server pou��van� pro sestaven� vysoce v�konn�ho\n"
-"a dostupn�ho serveru."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je dom�nov� (DNS) server, kter� p�ekl�d� hostitelsk� jm�na na "
-"IP adresy."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"P�ipojuje a odpojuje v�echny s��ov� (NFS), SMB (Lan/Windows) a Netware "
-"(NCP)\n"
-"p��pojn� body (mount points)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivuje �i deaktivuje v�echny s��ov� rozhran�, kter� maj� nastartovat p�i\n"
-"startu syst�mu."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je obl�ben� protokol pro sd�len� soubor� p�es s�t� TCP/IP.\n"
-"Tato slu�ba poskytuje NFS server, jeho� nastaven� je v /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je obl�ben� protokol pro sd�len� soubor� p�es s�t� TCP/IP.\n"
-"Tato slu�ba poskytuje mo�nost uzamyk�n� soubor� na NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automaticky nastav� podporu numerick� kl�vesnice v konzoli\n"
-"a v XFree p�i startu."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podpora pro OKI 4w a kompatibiln� wintisk�rny."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Podpora PCMCIA v�t�inou znamen� podporu za��zen� jako s��ov� karty a\n"
-"modemy v laptopech. Nespust� se pokud ji p��mo nenastav�te, ale nen� "
-"probl�m\n"
-"j� m�t nainstalovanou i na po��ta��ch, kter� ji nepot�ebuj�."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper spravuje RPC spojen�, kter� jsou pou��v�na protokoly jako NFS\n"
-"a NIS. Portmap server mus� b�t spu�t�n na po��ta��ch, kter� funguj� jako\n"
-"servery pro protokoly, kter� pou��vaj� mechanismus RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr "Postfix je program pro doru�ov�n� po�ty z jednoho po��ta�e na jin�."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Ukl�d� a obnovuje 'stav entropie' na po��ta�i, co� je pou��v�no pro\n"
-"kvalitn�j�� generaci n�hodn�ch ��sel."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"P�i�azuje p��m� za��zen� blokov�m (nap��klad diskov� odd�ly)\n"
-"pro aplikace jako je Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"D�mon routed umo��uje automaticky obnovovat sm�rovac� tabulku (router "
-"table)\n"
-"pro IP adresy. K tomu pou��v� protokol RIP. Zat�mco RIP je b�n� pou��v�n\n"
-"v mal�ch s�t�ch, pro slo�it�j�� s�t� je zapot�eb� slo�it�j�� protokoly."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protokol rstat umo��uje u�ivatel�m s�t� sledovat vyt��en� jednotliv�ch\n"
-"stroj� p�ipojen�ch k s�ti."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Protokol rusers umo��uje u�ivatel�m s�t� zjistit kdo je p�ihl�en na\n"
-"jin�m po��ta�i."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protokol rwho umo��uje vzd�len�m(remote) u�ivatel�m z�skat seznam\n"
-"v�ech u�ivatel� p�ihl�en�ch na po��ta�i s d�monem rwho (je to podobn�\n"
-"slu�b� finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Spustit zvukov� syst�m p�i startu"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je program pomoc� n�ho� zaznamen�v� mnoho d�mon� spr�vy do "
-"syst�mov�ch\n"
-"log soubor�. Je dobr� m�t spu�t�n� syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Nahr�t ovlada�e pro usb za��zen�."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Startuje X Font Server (to je nezbytn� pro b�h XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Zvolte si, kter� slu�by by m�li b�t automaticky spu�t�ny p�i startu"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Tisk"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Sd�len� soubor�"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Syst�m"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Vzd�len� administrace"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Datab�zov� servery"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Sku�by: aktivov�no %d z %d registrovan�ch"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Slu�by"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "spu�t�no"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zastaveno"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Slu�by a d�moni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nejsou ��dn� dal��\n"
-"informace o slu�b�, sorry."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "P�i spu�t�n�"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "D�kujeme v�m, �e jste si vybrali Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "V�tejte do sv�ta Open Source"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"�sp�ch spole�nosti MandrakeSoft je zalo�en na principech Svobodn�ho "
-"Software. Tento opera�n� syst�m je v�sledkem spolupr�ce ��sti celosv�tov� "
-"Linuxov� komunity"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "P�ipojte se ke sv�tu Svobodn�ho Software"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Chcete v�d�t v�ce o Open Source komunit�? St�t se tak� �lenem? Pokud chcete "
-"sd�let sv� v�domosti, pom�hat vytv��et n�stroje, p�ipojte se do diskuzn�ch "
-"klub�, kter� najdete na na�ich str�nk�ch \"Community\""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet a zpracov�n� zpr�v"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 nab�z� ten nejlep�� v�b�r software pro p��stup ke v�emu, "
-"co nab�z� Internet. S pomoc� Mozilly a Konquerora m��ete prohl��et webov� "
-"str�nky a animace, ke �ten� po�ty a zpracov�n� osobn�ch informac� lze pou��t "
-"Evolution a Kmail a vyu��t mno�stv� jin�ch program�"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multim�dia a grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 dovoluje naplno vyu��t v�ech multimedi�ln�ch schopnost� "
-"po��ta�e! M��ete tak p�ehr�vat r�zn� hudebn� soubory, editovat �i kreslit "
-"obr�zky nebo fotografie, sledovat TV a video atd."
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "V�voj"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 je vynikaj�c� platformou pro v�voj. M��ete vyu��t siln� "
-"GNU gcc kompil�tor a dal�� prost�edky na v�voj Open Source aplikac�"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "��d�c� centrum Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"��d�c� centrum pro Mandrake Linux 8.2 poskytuje v�konn� n�stroje na spr�vu a "
-"nastaven� va�eho po��ta�e"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "U�ivatelsk� rozhran�"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Distribuce Mandrake Linux 8.2 nab�z� 11 r�zn�ch grafick�ch u�ivatelsk�ch "
-"rozhran�, v�etn� GNOME 1.4, KDE 2.2.2, Window Maker, ..."
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Software pro servery"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"V� po��ta� lze n�kolika kliknut�mi my�i zm�nit na velmi v�konn� server: "
-"webov� server, po�tovn� server, firewall, router, souborov� a tiskov� server"
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Hry"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 nab�z� ty nejlep�� Open Source hry - ark�dy, ak�n�, "
-"karetn�, sportovn�, strategick�, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Chcete se dozv�d�t o Linuxu jednoduchou, rychlou a snadnou cestou? "
-"Poskytujeme zdarma �kolen� Linuxu, stejn� jako testy va�ich znalost� "
-"prost�ednictv�m online �kol�c�ho centra MandrakeCampus"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Kvalitn� podpora jak Linuxov� komunity tak z firmy MandrakeSoft je ji� k "
-"dispozici! Sta�te se \"expertem\" a m��ete pom�hat jak dal��m u�ivatel�m tak "
-"tak� podporovat na�e str�nky"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Na�i konzultanti jsou p�ipraveni analyzovat po�adavky a nab�dnout �e�en� "
-"v�ech va�ich IT projekt�. MandrakeSoft je firma, kter� m� velk� zku�enosti "
-"jako vydavatel distribuc� a nab�z� opravdovou alternativu pro IT �e�en� v "
-"podniku"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"N� elektronick� obchod nab�z� velk� mno�stv� Linuxov�ch �e�en�, speci�ln� "
-"nab�dky na�eho software a dal�� 'lah�dky'"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Pokud chcete z�skat v�ce informac� o profesion�ln�ch slu�b�ch fy "
-"MandrakeSoft a komer�n�ch nab�dk�ch, pod�vejte se pros�m na n��e uvedenou "
-"webovou str�nku:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instaluji bal��ky..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nem��u p�e��st va�i tabulku odd�l�, mo�n� je p��li� naru�en� :(\n"
-"Pokus�m se pokra�ovat v �i�t�n� �patn�ch odd�l�"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Chyba!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Nemohu naj�t pot�ebn� soubor '%s ' s obrazem."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Nastaven� automatick� instalace"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Zde m��ete nastavit disketu pro automatickou instalaci. Tato volba je n�kdy "
-"nebezpe�n� a m�la by se pou��vat s opatrnost�.\n"
-"\n"
-"Tato disketa dovoluje zopakovat instalaci, kter� ji� na tomto po��ta�i byla "
-"provedena s t�m, �e v n�kter�ch kroc�ch lze zadat jin� hodnoty.\n"
-"\n"
-"Pro maxim�ln� bezpe�nost nen� rozd�lov�n� disk� ani form�tov�n� prov�d�no "
-"automaticky, i p�esto, pokud to p�i instalaci zvol�te.\n"
-"\n"
-"Chcete pokra�ovat?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Nastaven� automatick�ch krok�"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Vyberte pros�m, kter� z krok� instalace m� b�t proveden automaticky stejn� "
-"jako instala�n� program nebo bude ru�n� zad�n"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"V�tejte.\n"
-"\n"
-"Parametry pro automatickou instalaci jsou p��stupn� v sekci nalevo"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratuluji!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa byla s �sp�chem vytvo�ena.\n"
-"Nyn� lze prov�st znovu instalaci."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Automatick� instalace"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "P�idat polo�ku"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Odstranit posledn� polo�ku"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"         Report programu DrackBackup \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"             Report d�monu pro DrackBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"               Detaily o reportu pro DrackBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "celkov� pr�b�h"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Z�lohovat syst�mov� soubory..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Z�lo�n� soubory pevn�ho disku..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Z�lohovat soubory u�ivatel�..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Pr�b�h z�lohov�n� na pevn� disk... "
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Z�lohovat dal�� soubory..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"seznam soubor� poslan� na FTP : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Probl�my FTP spojen�: nebylo mo�n� poslat data pro z�lohu p�es FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Chyba p�i pos�l�n� po�ty. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "V�b�r souboru"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Vyberte soubory nebo adres��e a klikn�te na 'P�idat'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Zvolte pros�m v�echny volby, kter� pot�ebujete.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr "Tato volba zaz�lohuje a obnov� v�echny soubory v adres��i /etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Z�lohovat syst�mov� soubory ( adres�� /etc )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Pou��t p��r�stkovou z�lohu (nep�episovat star�� z�lohy)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Nezahrnout kritick� soubory (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr "Tato volba dovol� obnovit r�zn� verze adres��e /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Zvolte pros�m v�echny u�ivatele, kter� chcete z�lohovat."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Nezahrnout cache prohl��e�e"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Pou��t p��r�stkovou z�lohu (nep�episovat star�� z�lohy)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Odstranit vybran�"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "U�ivatel�"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Pou��t FTP p�ipojen� pro z�lohu"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Zadejte pros�m jm�no po��ta�e nebo IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Zadejte adres��, do kter�ho\n"
-" bude um�st�na z�loha."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Zadejte sv� p�ihla�ovac� jm�no"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Zadejte sv� heslo"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Pamatovat si heslo"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP p�ipojen�"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Bezpe�n� p�ipojen�"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Pou��t pro z�lohov�n� CD/DVDROM"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Vyberte si velikost CD m�dia"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Zvolte pokud pou��v�te CDRW m�dia"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Pokud CDRW m�dium nejd��ve smazat, zatrhn�te"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Pokud chcete m�t spou�t�c� CD,\n"
-" zatrhn�te tuto volbu."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Zadejte jm�no va�� vypalova�ky CD\n"
-" nap�.: 1,0,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Pou��t p�skovou jednotku"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Zadejte jm�no za��zen�, na kter� se bude z�lohovat"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Zadejte pros�m maxim�ln� velikost\n"
-" povolenou pro Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Zadejte adres��, kam bude um�st�na z�loha:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Pou��t kv�ty pro z�lo�n� soubory."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "S��"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Pevn� disk / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "ka�dou hodinu"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "ka�d� den"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "ka�d� t�den"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "ka�d� m�s�c"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Pou��t d�mona"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Vyberte si interval mezi\n"
-"jednotliv�mi z�lohami"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Pros�m zvolte si\n"
-"m�dium pro z�lohy."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Pou��t pro pevn� disk d�mona"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Pou��t pro s�� d�mona"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Ujist�te se, �e mezi slu�bami je p��tomen cron d�mon."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Poslat report po z�loze mailem na :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Co"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Kde"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Kdy"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Dal�� volby"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Nastaven� pro DrakBackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Vyberte si, pros�m, kam chcete z�lohovat."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "na pevn� disk"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "p�es s��"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Pros�m vyberte si, co chcete z�lohovat"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Z�lohovat syst�m"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Z�lohovat u�ivatele"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Vybrat u�ivatele manu�ln�"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Zdroje pro z�lohu:\n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Syst�mov� soubory:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Soubory u�ivatel�:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Dal�� soubory:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Ulo�it na pevn� disk do adres��e: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Ulo�it na FTP na po��ta�: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t u�ivatelsk� jm�no: %s\n"
-"\t\t cesta: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Volby:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tNezahrnout syst�mov� soubory\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tZ�lohov�n� pou��v� tar a bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tZ�lohov�n� pou��v� tar a gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- D�mon (%s) zahrnuje :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Pevn� disk.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-S�t� p�es FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-S�t� p�es SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Pro prvn� spu�t�n� pou�ijte Pr�vodce nebo Roz���en�.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Seznam dat pro obnoven�:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Seznam po�kozen�ch dat:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Zru�te tuto volbu p�i dal��m spu�t�n�."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Z�lo�n� soubory jsou po�kozen�"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "             V�echna vybran� data byla              "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "        �sp�n� obnoveno na %s         "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "          Obnovit konfiguraci         "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Obnovit tak� ostatn� soubory."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Seznam u�ivatel� pro obnoven� (od ka�d�ho bude obnovena pouze posledn� "
-"z�loha)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Z�lohovat syst�mov� soubory p�ed:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Vyberte datum obnoven� z�lohy"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Pou��t pro z�lohov�n� pevn� disk"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Obnovit z pevn�ho disku."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Zadejte adres��, kde jsou um�st�ny z�lohy"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Vyberte dal�� m�dium, kde jsou um�st�ny z�lohy"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Dal�� m�dia"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Obnovit syst�m"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Obnovit u�ivatele"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Obnovit ostatn�"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "vyberte cestu pro obnovu (krom� / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Prov�st novou z�lohu p�ed obnovou (pouze pro p��r�stkovou z�lohu)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Odebrat adres��e u�ivatele p�ed obnovou."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Obnovit v�echny z�lohy"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Vlastn� obnova"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "N�pov�da"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "P�edchoz�"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Ulo�it"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Vytvo�it z�lohu"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Obnovit"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Dal��"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"D��ve ne� budete obnovovat, vytvo�te z�lohu...\n"
-"nebo ov��te, �e dan� cesta je spr�vn�."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Chyba p�i pos�l�n� po�ty\n"
-" v�mi zvolen� report nebyl odesl�n\n"
-" Prove�te pros�m nastaven� sendmailu"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Seznam bal��k� pro instalaci"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Chyba p�i pos�l�n� soubor� p�es FTP.\n"
-" Pros�m opravte nastaven� pro FTP."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Pros�m zvolte data pro obnovu..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Pros�m zvolte si m�dium pro z�lohy..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Zkontrolujte pros�m data pro z�lohov�n�..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Nebyl nalezen konfigura�n� soubor, \n"
-"klikn�te na Pr�vodce nebo na Roz���en�."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Vyv�j� se... �ekejte pros�m."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Z�lohovat syst�mov� soubory"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Z�lohovat u�ivatelsk� soubory"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Z�lohovat dal�� soubory"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Celkov� pr�b�h"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "soubory poslan� p�es FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Pos�l�m soubory..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Seznam dat, kter� budou na CROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Zadejte rychlost vypalovac� mechaniky"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Zadejte pros�m jm�no CD vypalova�ky (nap�.: 1.0.0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Zvolte, pokud chcete m�t instala�n� CD spustiteln�."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Z�lohovat z konfigura�n�ho souboru"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Prohl�dnout konfiguraci z�lohy."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Pr�vodce konfigurac�"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Roz���en� konfigurace"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Z�lohovat nyn�"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"Popis voleb:\n"
-"\n"
-" V tomto kroku Drakbackup m��e zm�nit:\n"
-"\n"
-" - Re�im komprese:\n"
-"     \n"
-"      Pokud zvol�te bzip2, budete m�t kompresi\n"
-"      lep�� ne� pomoc� gzip (okolo 2-10%).\n"
-"      Tato volba nen� zvolena jako v�choz�, proto�e\n"
-"       vy�aduje daleko v�ce �asu (a� o 1000% v�ce).\n"
-"\n"
-" - Re�im z�lohov�n�:\n"
-"\n"
-"       Tato volba aktualizuje z�lohu, ale nen� moc zaj�mav�,\n"
-"       proto�e p�ed aktualizac� mus�te nejd��ve z�lohu obnovit.\n"
-"       \n"
-"- pou�it� souboru .backupignore:\n"
-"\n"
-"       Stejn� jako pro cvs, i pro Drakbackup lze uv�st seznam\n"
-"       soubor� v .backupignore, kter� budou p�i z�lohov�n� ignorov�ny.\n"
-"       nap�.:\n"
-"              \\$> cat .backupignore\n"
-"               *.o\n"
-"               *~\n"
-"               ...\n"
-"          \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" N�kter� chyby p�i nastaven� po�ty jsou zp�sobeny\n"
-" �patnou konfigurac� programu postfix. Pro vy�e�en�\n"
-" nastavte myhostname a mydomain v /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"popis voleb:\n"
-"\n"
-"- Z�loha syst�mov�ch soubor�:\n"
-"            \n"
-"\tTato volba z�lohuje adres�� /etc, kter� obsahuje v�echny\n"
-"\tkonfigura�n� soubory. D�vejte pozor p�i obnov� na to,\n"
-"\taby se nep�epsaly soubory:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Z�lohovat soubory u�ivatel�:\n"
-"\n"
-"\tTato volba dovoluje vybrat v�echny u�ivatele, kter�\n"
-"\t\tchcete z�lohovat.\n"
-"\tAby se u�et�ilo m�sto na disku, nen� dobr� zahrnout cache\n"
-"\tod prohl��e�e.\n"
-"\n"
-" - Z�lohovat ostatn� soubory:\n"
-"\n"
-"\tTato volba dovol� p�idat dal�� data pro z�lohov�n�.\n"
-"\tV sou�asnosti nen� mo�n� p�i tomto z�lohov�n� zvolit\n"
-"\tp��r�stkov� z�lohov�n�.\t\n"
-"\n"
-" - P��r�stkov� z�lohov�n�:\n"
-"\n"
-"\tP��r�stkov� z�lohov�n� je velmi mocn� druh z�lohov�n�,\n"
-"\tproto�e dovoluje z�lohovat v�echna data pouze poprv�\n"
-"\ta d�le se z�lohuj� pouze zm�ny.\n"
-"\tB�hem obnovy tak budete moci zadat, od jak�ho data se\n"
-"\tmaj� data obnovit.\n"
-"\tPokud nezvol�te tuto mo�nost, bude p�i ka�d� z�loze\n"
-"\tp�edchoz� z�loha smaz�na.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Popis voleb pro obnovu:\n"
-"\n"
-"Bude pou�ita z�loha s nejaktu�ln�j��m datem, proto�e p�i\n"
-"p��r�stkov�m z�lohov�n� je nutn� prov�d�t obnovu jednu\n"
-"za druhou sm�rem ke star��m dat�m.\n"
-"\n"
-"Pokud nechcete obnovit u�ivatele, odzna�te v�echny\n"
-"jeho za�krt�vac� pol��ka.\n"
-"\n"
-"Jinak je mo�n� si vybrat pouze jednoho z nich\n"
-"\n"
-" - P��r�stkov� z�lohov�n�:\n"
-"\n"
-"\tP��r�stkov� z�lohov�n� je velmi mocn� druh z�lohov�n�,\n"
-"\tproto�e dovoluje z�lohovat v�echna data pouze poprv�\n"
-"\ta d�le se z�lohuj� pouze zm�ny.\n"
-"\tB�hem obnovy tak budete moci zadat, od jak�ho data se\n"
-"\tmaj� data obnovit.\n"
-"\tPokud nezvol�te tuto mo�nost, bude p�i ka�d� z�loze\n"
-"\tp�edchoz� z�loha smaz�na.\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Tento program je svobodn� software; m��ete ho ���it a/nebo modifikovat\n"
-" podle specifikace GNU General Public Licence, kter� byla publik�va\n"
-" Free Software Foundation; bu� verze 2, nebo (podle volby) pozd�j�� verze.\n"
-"\n"
-" Tento program je distribuov�n s nad�j�, �e bude u�ite�n�,\n"
-" ale BEZ JAK�CHKOLIV Z�RUK; BEZ N�ROKU NA PROFIT. V�ce detail� naleznete\n"
-" v licenci GNU General Public Licence.\n"
-"\n"
-" Kopii GNU General public Licence m��ete obdr�et bu� s t�mto programem\n"
-" nebo si o n� m��ete napsat na adresu Free Software Foundation, Inc.,\n"
-" 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Popis:\n"
-"\n"
-"  Drakbackup je n�stroj na z�lohov�n� syst�mu.\n"
-"  B�hem konfigurace m��ete vybrat: \n"
-"\t- Syst�mov� soubory,\n"
-"\t- Soubory u�ivatel�,\n"
-"\t- Ostatn� soubory.\n"
-"\tnebo Cel� syst�m a jin� (jako jsou odd�ly s Windows).\n"
-"\n"
-"  Drakbackup dovoluje z�lohovat na:\n"
-"\t- Pevn� disk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (se spu�t�n�m, z�chranou a autoinstalac�).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- P�skovou jednotku.\n"
-"\n"
-"  Drakbackup dovoluje prov�st obnovu do vybran�ho adres��e.\n"
-"\n"
-"  Jako v�choz� jsou um�st�ny v�echny z�lohy do adres��e\n"
-"  /var/lib/drakbackup \n"
-"\n"
-"  Konfigura�n� soubor:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
-"\n"
-"\n"
-"Postup p�i obnov�:\n"
-"\n"
-"  P�i prov�d�n� obnovy odstran� Drakbackup p�vodn� adres��\n"
-"  a ov���, �e z�lohovan� soubory nejsou po�kozeny.\n"
-"  Doporu�uje se ale prov�st z�lohu t�chto dat p�ed proveden�m\n"
-"  obnovy.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"popis voleb:\n"
-"\n"
-"Bu�te opatrn� p�i z�lohov�n� na FTP, proto�e na server je posl�na\n"
-"pouze ji� vytvo�en� z�loha.\n"
-"Je tud�� vhodn� nejd��ve prov�st z�lohu na disk p�ed t�m, ne�\n"
-"ji po�lete na server.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Probl�my p�i obnov�:\n"
-"\n"
-"P�i obnovov�n� Drakbackup nejd��ve ov��uje v�echny\n"
-"z�lohovan� soubory.\n"
-"P�ed t�m, ne� je soubor obnoven, provede Drakbackup v�maz\n"
-"p�vodn�ho souboru, a tak p�ijdete o v�echna data.\n"
-"Bu�te proto opatrn� a nesna�te se modifikovat z�lohovan�\n"
-"data ru�n�.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Popis:\n"
-"\n"
-"  Drakbackup je n�stroj na z�lohov�n� syst�mu.\n"
-"  B�hem konfigurace m��ete vybrat \n"
-"\t- Syst�mov� soubory,\n"
-"\t- Soubory u�ivatel�,\n"
-"\t- Ostatn� soubory.\n"
-"\tnebo Cel� syst�m a jin� (jako jsou odd�ly s Windows).\n"
-"\n"
-"  Drakbackup dovoluje z�lohovat na:\n"
-"\t- Pevn� disk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (se spu�t�n�m, z�chranou a autoinstalac�).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- P�skovou jednotku.\n"
-"\n"
-"  Drakbackup dovoluje prov�st obnovu do vybran�ho adres��e.\n"
-"\n"
-"  Jako v�choz� jsou um�st�ny v�echny z�lohy do adres��e\n"
-"  /var/lib/drakbackup \n"
-"\n"
-"  Konfigura�n� soubor:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
-"\n"
-"\n"
-"Postup p�i obnov�:\n"
-"\n"
-"  P�i prov�d�n� obnovy odstran� Drakbackup p�vodn� adres��\n"
-"  a ov���, �e z�lohovan� soubory nejsou po�kozeny.\n"
-"  Doporu�uje se ale prov�st z�lohu t�chto dat p�ed proveden�m\n"
-"  obnovy.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalace %s neusp�la. Stala se tato chyba:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Hled�m instalovan� fonty"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Odzna�it instalovan� fonty"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "zpracov�v�m v�echny fonty"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "nebyly nalezeny ��dn� fonty"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "hotovo"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "nelze nal�zt ��dn� fonty v p�ipojen�m odd�le"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Znovu vybrat spr�vn� fonty"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "nelze nal�zt ��dn� font.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Hledat fonty mezi instalovan�mi"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopie fontu"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Instalace font� True Type"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "�ekejte pros�m, pr�v� b�� ttmkfdir... "
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Instalace True Type font� je dokon�ena"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konverze font�"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "vytv���m type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Odkazy na Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "konverze ttf font�"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "konverze pfm font�"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Ignorovat do�asn� soubory"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Restartovat XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Ignorovat soubory s fonty"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "restart xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"P�ed instalac� font� se ujist�te, �e m�te pot�ebn� pr�va na instalac� a "
-"pou��v�n� na syst�mu.\n"
-"\n"
-"- Fonty lze instalovat b�n�m zp�sobem. Ve v�jime�n�ch p��padech m��e �patn� "
-"font zp�sobit zamrznut� X serveru."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Zav�d�n� font�"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Na��st fonty z Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Odinstalovat fonty"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Roz���en� volby"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Seznam font�"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Zvolte aplikace, kter� podporuj� fonty:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Obecn� tisk�rny"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Vyberte soubor s fontem nebo adres�� a klikn�te na 'P�idat'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Instalovat seznam"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "klikn�te zde, pokud jste si jisti."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "zde pokud si nejste jisti."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Zru�it cel� v�b�r"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Vybrat v�e"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Odebrat seznam"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "�vodn� testy"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kop�rovat fonty do syst�mu"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Instalovat & konvertovat fonty"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Poinstala�n� nastaven�"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Odebrat fonty ze syst�mu"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Nastaven� po odebr�n�"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Sd�len� Internetov�ho P�ipojen�"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Sd�len� Internetov�ho p�ipojen� je zapnuto"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Sd�len� internetov�ho p�ipojen� u� bylo nastaveno.\n"
-"Nyn� je povoleno.\n"
-"\n"
-"Co chcete d�le d�lat?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "vypnout"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "odm�tnout"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "p�ekonfigurovat"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Zakazuji servery..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Sd�len� Internetov�ho p�ipojen� je nyn� vypnuto."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Sd�len� Internetov�ho p�ipojen� je vypnuto"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetov� sd�len� u� bylo nastaveno.\n"
-"Nyn� je vypnuto.\n"
-"\n"
-"Co chcete d�le d�lat?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "povolit"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Povoluji servery..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Sd�len� Internetov�ho p�ipojen� je nyn� zapnuto."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"V� po��ta� bude zkonfigurov�n pro sd�len� p�ipojen� na Internet.\n"
-"Tato mo�nost umo��uje p��stup dal��ch po��ta�� na lok�ln� s�ti do Internetu "
-"p�es tento po��ta�.\n"
-"\n"
-"Pozn.: pot�ebujete vyhrazen� s��ov� adapt�r pro nastaven� lok�ln� s�t� (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Rozhran� %s (pou��v� modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Rozhran� %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Ve va�em syst�mu nen� ��dn� s��ov� adapt�r!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ve va�em po��ta�i nebyl nalezen ��dn� s��ov� adapt�r. Spus�te pros�m program "
-"pro nastaven� hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "S��ov� rozhran�"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Na va�em syst�mu je nastaveno pouze jedno s��ov� rozhran�:\n"
-"\n"
-"%s\n"
-"\n"
-"Na tomto adapt�ru bude nastavena lok�ln� s��."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Pros�m zvolte si, ke kter�mu s��ov�mu adapt�ru bude p�ipojena LAN."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "S��ov� rozhran� je ji� nastaveno"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Varov�n�, s��ov� adapt�r  (%s) je ji� nastaven.\n"
-"\n"
-"Chcete ho automaticky p�enastavit?\n"
-"\n"
-"Lze to tak� prov�st ru�n�, ale mus�te v�d�t, co d�l�te."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatick� p�enastaven�"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Zobrazit aktu�ln� nastaven� rozhran�"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Aktu�ln� konfigurace pro '%s':\n"
-"\n"
-"S��: %s\n"
-"IP adresa: %s\n"
-"IP atributy: %s\n"
-"Ovlada�: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Mohu zachovat sou�asnou konfiguraci a p�edpokl�d�m, �e m�te ji� nastaven� "
-"DHCP server; v takov�m p��pad� ov��te, �e je spr�vn� nastavena lok�ln� s��; "
-"nebude v n� provedena ��dn� zm�na a nebude ani zm�n�n DHCP server.\n"
-"\n"
-"Jinak mohu zm�nit jak rozhran�, tak tak� p�enastavit DHCP server podle "
-"pot�eby.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Lok�ln� s��"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "Adresa DHCP serveru"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "P�enastaven� rozhran� a DHCP serveru"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "��slo lok�ln� s�� nekon�� na .0, zkou��m znovu."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Na�el jsem mo�n� konflikt v sou�asn�m nastaven� LAN adresy pro %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Na�el jsem existuj�c� nastaven� firewallu!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Varov�n�! Bylo nalezeno existuj�c� nastaven� firewallu. Po instalaci m��e "
-"b�t zapot�eb� n�jak� ru�n� �prava."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Nastavuji..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Nastavuji skripty, instaluji software, startuji servery..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probl�m s instalac� bal��ku %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"V�e se poda�ilo nastavit.\n"
-"Nyn� lze pou��t tento po��ta� pro sd�len� p�ipojen� k Internetu pro va�i "
-"lok�ln� s��, kter� pou��v� automatickou konfiguraci s�t� (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Nastaven� ji� bylo provedeno, ale nyn� je vypnuto."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Nastaven� ji� bylo provedeno, nyn� je povoleno."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Nen� nastaveno ��dn� sd�len� Internetov�ho p�ipojen�."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Nastaven� sd�len� p�ipojen� k Internetu"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"V�t� v�s pr�vodce nastaven�m sd�len� p�ipojen� k Internetu!\n"
-"\n"
-"%s\n"
-"\n"
-"Klikn�te na Konfigurovat, pokud chcete spustit pr�vodce nastaven�m."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Nastaven� s�t� (%d adapt�ry(�))"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Smazat profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Smazat profil:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nov� profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Zadejte jm�no vytv��en�ho profilu (nov� profil je vytvo�en jako kopie "
-"vybran�ho) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Jm�no po��ta�e: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "P��stup na Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Typ:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Br�na(gateway):"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Rozhran�:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "�ekejte pros�m"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Nastavuji p��stup na Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Nastaven� LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Ovlada�"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Rozhran�"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Nastavuji lok�ln� s��..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Klikn�te pro spu�t�n� pr�vodce ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Pr�vodce..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Pou��t"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "�ekejte pros�m... Aktivuji konfiguraci"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "P�ipojen"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nep�ipojen"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "P�ipojit..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Odpojit..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr "Varov�n�, bylo detekov�no jin� p�ipojen� k Internetu, z�ejm� je to s��"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nem�te nakonfigurov�no ��dn� rozhran�.\n"
-"Nastavte jej kliknut�m na 'Konfigurovat'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Nastaven� LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapt�r %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protokol o spu�t�n�"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Spustit p�i startu"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktivovat nyn�"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktivovat nyn�"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Toto rozhran� je�t� nebylo nastaveno.\n"
-"Spus�te pr�vodce konfigurac� z hlavn�ho okna"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nem�te ��dn� p�ipojen� k Internetu.\n"
-"Vytvo�te si jej kliknut�m na 'Konfigurovat'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfigurace p�ipojen� k internetu"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfigurace p�ipojen� k internetu"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Typ p�ipojen�:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametry"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Br�na(gateway)"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernetov� karta"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "�rove� zabezpe�en�"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "��d�c� centrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Zvolte si n�stroj, kter� chcete pou��t"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "��na (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japonsko (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japonsko (kabel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "V�chodn� Evropa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irsko"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Z�padn� Evropa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Austr�lie"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nov� Z�land"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Ji�n� Afrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Zadejte pros�m\n"
-"typ TV normy a zemi"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Norma TV:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Oblast :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Prob�h� vyhled�v�n� TV kan�l� ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Vyhled�v�m TV kan�ly"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "Nebyla nalezena TV karta!"
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"V po��ta�i nebyla nalezena ��dn� TV karta. Zkontrolujte pros�m, zda "
-"podporovan� karta je spr�vn� zapojena.\n"
-"\n"
-"\n"
-"Datab�zi hardware lze nal�zt na:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "pou�it�: keyboarddrake [--expert] [kl�vesnice]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Jak� je rozlo�en� va�� kl�vesnice?"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Chcete, aby se kl�vesa BackSpace chovala v konzoli jako Delete?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Vym�nit CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Vlo�te pros�m Instala�n� CD-ROM do mechaniky a stiskn�te Ok.\n"
-"Pokud CD nem�te, stiskn�te Zru�it pro p�eru�en� aktualizace syst�mu."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Nelze spustit aktualizaci na b��c� syst�m !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Zm�ny jsou provedeny, ale pro aktivaci je nutn� prov�st logout"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Zobrazit pouze pro vybran� den"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/_Soubor/_Nov�"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Soubor/_Otev��t"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Soubor/_Ulo�it"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>U"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Soubor/Ulo�it _jako"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Soubor/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Volby"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Volby/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_N�pov�da"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/N�pov�da/_O aplikaci..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-iso8859-2,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-iso8859-2,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "U�ivatel"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Zpr�vy"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Vysv�tlivky n�stroj� Mandrake Linuxu"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "vyhledat"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "N�stroj na monitorov�n� log�"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Nastaven�"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "shodn�ch"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "neshodn�ch"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Vyberte soubor"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalend��"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Obsah souboru"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Varovn� zpr�vy p�es Mail/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "�ekejte pros�m, zpracov�v�m soubor: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Nastaven� upozorn�n� p�es Mail/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"V�tejte v konfiguraci varovn�ch zpr�v p�es mail/SMS.\n"
-"\n"
-"Zde lze nastavit pos�l�n� varovn�ch zpr�v.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "nastaven� slu�eb"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Pokud jedna z vybran�ch slu�eb nepob��, obdr��te varovnou zpr�vu"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "nahr�t volby"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Pokud bude hodnota vet�� ne� zadan� ��slo, obdr��te varovnou zpr�vu"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "nastaven� varov�n�"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Nastavuje zp�sob, jak�m bude syst�m pos�lat varovn� hl�ky"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Ulo�it jako..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Jak� je typ va�� my�i?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nebylo nalezeno serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulovat t�et� tla��tko?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s nalezeno na %s, chcete ho nastavit?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Zvolte si skener"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Skener %s nen� podporov�n"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"Scannerdrake nebyl schopen detekovat v� skener %s.\n"
-"Vyberte pros�m za��zen�, ke kter�mu je skener p�ipojen"
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "vyberte za��zen�"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Skener %s mus� b�t nastaven pomoc� n�stroje printerdrake.\n"
-"Spustit printerdrake lze z ��d�c�ho centra Mandrake v sekci Hardware"
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"V� skener %s byl nastaven.\n"
-"Nyn� lze skenovat dokumenty pomoc� aplikace \"XSane\" z nab�dky aplikac� "
-"Multim�dia/Grafika."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Konfigurace firewallu"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Konfigurace firewallu"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Firewall je ji� nastaven.\n"
-"Klikn�te na Konfigurovat pro zm�nu nebo odebr�n� firewallu"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Klikn�te na Konfigurovat pro standardn� firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "V�b�r jazyka"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Volba typu instalace"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detekce hardisk�"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Nastaven� my�i"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "V�b�r kl�vesnice"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Bezpe�nost"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Souborov� syst�my"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Form�tov�n� odd�l�"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "V�b�r bal��k� pro instalaci"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalace syst�mu"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "P�id�n� u�ivatele"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Nastaven� s�t�"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Nastaven� slu�eb"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Zav�d�c� program"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Startovac� disketa"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Nastaven� X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Aktualizace syst�mu"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Ukon�it instalaci"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Konfigurace tinyfirewallu\n"
-"\n"
-"Zde je mo�n� nastavit jednoduch� firewall pro Mandrake Linux.\n"
-"Pro v�konn� �e�en� firewallu pou�ijte specializovanou\n"
-"distribuci MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Nyn� budete dot�z�ni v n�kolika ot�zk�ch na slu�by, kter� chcete m�t\n"
-"p��stupn� z Internetu. Zamyslete se pros�m dob�e nad t�mito\n"
-"ot�zkami, proto�e bezpe�nost po��ta�e je d�le�it�.\n"
-"\n"
-"Pokud nepou��v�te d�le vyjmenovan� slu�by, zaka�te je pros�m.\n"
-"Tyto volby lze kdykoliv zm�nit spu�t�n�m t�to aplikace!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Pot�ebujete na tomto po��ta�i web server, kter� je p��stupn�\n"
-"z Internetu? Pokud pot�ebujete webov� server p��stupn� pouze\n"
-"z tohoto stroje, odpov�zte na tuto ot�zku Ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Pou��v�te na tomto serveru jmenn� server? Pokud ne a nepot�ebujete\n"
-"p�ed�vat jin�m po��ta��m informace o IP adres�ch, odpov�zte Ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Chcete povolit p��choz� ssh (Secure Shell) spojen�? Ssh je n�hrada\n"
-"za telnet, kter� umo��uje vzd�len� p�ihl�en�. Pokud nyn�\n"
-"pou��v�te telnet, je velmi vhodn� p�ej�t na ssh. Telnet nen�\n"
-"kryptovan� -- kdokoliv m��e zjistit heslo, pokud ho p�i telnetu\n"
-"pou�ijete. Na rozd�l od telnetu je ssh kryptovan�, tak�e nen�\n"
-"mo�n�, aby kdokoliv zjistil heslo."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Chcete povolit p��choz� spojen� p�es telnet?\n"
-"Je to VELMI nebezpe�n�, tak jak u� bylo vysv�tleno na p�edchoz�\n"
-"obrazovce. D�razn� doporu�ujeme odpov�d�t Ne a pou��t nam�sto\n"
-"telnetu ssh.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Chcete pou��t FTP server, kter� bude p��stupn� z Internetu? Pokud ano,\n"
-"je doporu�eno jej pou��vat pouze pro anonymn� p��stup. Proto�e FTP\n"
-"pro p��stup nepou��v� ��dn� kryptov�n�, je mo�n�, �e zaslan� heslo m��e\n"
-"z�skat kdokoliv, i potenci�ln� �to�n�k.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Pou��v�te mailov� server? Pokud pos�l�te po�tu p�es klienta pine,\n"
-"mutt nebo jin�ho textov�ho klienta, tak z�ejm� ano. V jin�ch\n"
-"p��padech to zaka�te na firewallu.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Pou��v�te na tomto serveru POP nebo IMAP? Ty se pou��vaj�\n"
-"pro p��stup lid� k emailov�m ��t�m (ne p�es web).\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Pou��v�te j�dro verze 2.2. Pokud je s��ov� IP adresa automaticky\n"
-"p�id�lena po��ta�i doma nebo v pr�ci (dynamick� p�id�len�),\n"
-"pot�ebujeme tuto mo�nost povolit. Je to tento p��pad?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Bude v� po��ta� synchronizov�n s jin�m po��ta�em?\n"
-"V�t�inou se to pou��v� v organizac�ch s v�t��m po�tem Unix/Linux\n"
-"po��ta�� pro synchronizaci logov�n� a podobn�. Pokud nejste\n"
-"sou��st� v�t��ho celku nebo jste o ni�em podobn�m nesly�eli,\n"
-"synchronizaci nepot�ebujete."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurace je hotova. Je mo�n� zapsat tyto zm�ny na disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Nelze otev��t %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Chyba p�i otev�r�n� %s pro z�pis: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Ne, nepot�ebuji DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Ano, pot�ebuji DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Ne, nepot�ebuji NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Ano, pot�ebuji NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Neukl�dat"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Ulo�it & Konec"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Pr�vodce konfigurac� firewallu"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Ne (zak�zat na firewalu)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Ano (povolit na firewalu)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "�ekejte pros�m... ov��uji nainstalovan� bal��ky"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Selhala instalace pot�ebn�ch bal��k� : %s a Bastille.\n"
-" Pokuste se je instalovat ru�n�."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "S��ov� po��ta� (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, SSH server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kancel��"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Pracovn� stanice s Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "N�stroje pro v� Palm Pilot nebo Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Pracovn� stanice"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Dom�nov� jm�na a s��ov� informa�n� server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programy pro kancel��: textov� procesory (kword, abiword), tabulkov� "
-"procesory (kspread, gnumeric), prohl��e�e pdf a dal��"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "N�stroje pro zvuk: p�ehr�va�e mp3 a midi, mix�ry a dal��"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knihy a Howto o Linuxu a Free Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Pracovn� stanice s KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm a dal��"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multim�dia - video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Skupina program� pro mail, newsy, web, p�enos soubor� a chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Datab�ze"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Datab�zov� servery PostreSQL nebo MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "N�stroje pro snadnou konfiguraci po��ta�e"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multim�dia - zvuk"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utility"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentace"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konzolov� n�stroje"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Po�tovn� server postfix, server pro news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetov� stanice"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multim�di�ln� stanice"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Nastaven�"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Dal�� grafick� desktopy Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, z�kladn� grafick� prost�ed� s kolekc� doprovodn�ch "
-"n�stroj�"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafick� prost�ed�"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache a Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "N�stroje pro vytv��en� a vypalov�n� CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kancel��sk� stanice"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm a dal��"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafick� programy jako nap�. Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Knihovny pro v�voj v C a C++, programy a hlavi�kov� soubory"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "S��ov� server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Po�ta/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Hry"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "P�ehr�va�e a editory videa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multim�dia - grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Z�bavn� programy: deskov� hry, strategie, atd."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Kolekce n�stroj� pro �ten� a pos�lan� mail� (pine, mutt, tin..) a pro "
-"prohl��en� Webu"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivace, emul�tory, minitoring"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Spr�va osobn�ch financ�"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafick� prost�ed� s u�ivatelsky p��v�tiv�m seskupen�m aplikac� a pracovn� "
-"plochou"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienti pro r�zn� verze protokolu ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetov� br�na"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programy pro p�ehr�v�n�/editaci zvuku a videa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Dal�� grafick� desktopy"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editory, shelly, souborov� n�stroje, termin�ly"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programy na spr�vu financ� jako nap�. gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Spr�vce osobn�ch informac� (PIM)"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multim�dia - vypalov�n� CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "V�deck� stanice"
diff --git a/perl-install/share/po/cy.po b/perl-install/share/po/cy.po
deleted file mode 100644
index 97fdf158a..000000000
--- a/perl-install/share/po/cy.po
+++ /dev/null
@@ -1,12371 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# Dafydd Tomos <dafydd@imaginet.co.uk>, 1999
-# Rhoslyn Prys <rhoslyn.prys@ntlworld.com>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-11 12:35-0000\n"
-"Last-Translator: Rhoslyn Prys <rhoslyn.prys@ntlworld.com>\n"
-"Language-Team: Cymraeg/Welsh <cy@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-14\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Ffurfweddu pob pen yn annibynnol"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Defnyddiwch estyniad Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Ffurfweddu cerdyn \"%s\" (%s) yn unig"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Ffurfweddiad amlben"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Mae eich system yn cynnal ffurfweddiad amlben.\n"
-"Beth hoffech ei wneud?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Cerdyn graffig"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Dewiswch gerdyn graffig"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Dewiswch wasanaethwr X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Gwasanaethwr X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Dewiswch yrrwr X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Gyrrwr X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Pa ffurfweddiad oXFree hoffech ei gael?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Mae eich cerdyn yn medru cael cefnogaeth cyflymu caledwedd 3D ond dim ond "
-"gyda XFree %s.\n"
-"Mae eich cerdyn yn cael ei gynnal gan XFree %s efallai bod gwell cefnogaeth "
-"yn 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda XFree %s"
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s gyda cyflymu caledwedd 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda XFree %s \n"
-"SYLWER CEFNOGAETH ARBROFOL YW HWN AC FE ALL RHEWI EICH CYFRIFIADUR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s gyda cyflymu caledwedd 3D ARBROFOL"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Mae eich cerdyn yn medru cael cefnogaeth cyflymu caledwedd 3D ond dim ond "
-"gyda XFree %s.\n"
-"SYLWER CEFNOGAETH ARBROFOL YW HWN AC FE ALL RHEWI EICH CYFRIFIADUR.\n"
-"Mae eich cerdyn yn cael ei gynnal gan XFree %s efallai bod gwell cefnogaeth "
-"yn 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (gyrrwr gosod dangoswr)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Ffurfweddiad XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Dewiswch faint y cof eich cerdyn graffeg"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Dewiswch opsiynau ar gyfer y gwasanaethwr"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Dewiswch fonitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Y ddau paramedr pwysig yw'r raddfa adnewyddu fertigol, sef y raddfa mae'r\n"
-"holl sgrin yn cael ei adnewyddu, ac yn fwyaf pwysif y raddfa cydamseru\n"
-"llorweddol, sef y raddfa mae'r llinellau sganio'n cael eu dangos.\n"
-"\n"
-"Mae'r BWYSIG IAWN mad ydych yn enwi monitor gyda graddfa cydamseru\n"
-"sydd tu hwnt i allu eich monitor: mae modd difrodi eich monitor drwy wneud "
-"hynny.\n"
-"Os oes gennych amheuaeth, dewiswch raddfa is."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Graddfa adfywio llorweddol"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Graddfa adfywio fertigol"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor heb ei ffurfweddu"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Cerdyn graffig heb ei ffurfweddu eto"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Cydraniad heb ei ddewis eto"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Ydych chi eisiau profi eich ffurfweddiad?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Rhybydd: gall profi'r cerdyn graffig hwn rewi eich cyfrifiadur"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Profi'r ffurfweddiad"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ceisiwch newid rhai paramedrau"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Digwyddodd gwall:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Gadael mewn %d eiliad"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ydi'r gosodiad hwn yn gywir?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Digwyddodd gwall, ceisiwch newid rhai paramedrau"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Cydraniad"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Dewiswch y cydraniad a'r dyfnder lliw"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Cerdyn graffeg: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Gwasanaethwr XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Rhagor"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Iawn"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modd Arbennigwr"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Dangos y cyfan"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Cydraniadau"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Gosodiad yr yr allweddell: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Math o lygoden: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dyfais  llygoden: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "HorizSync Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "VertRefresh Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Cerdyn graffeg: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Dynodiad y cerdyn graffeg: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Cof graffeg: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Dyfnder lliw: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Cydraniad: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "GwasanaethwrXFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Gyrrwr XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Beth ydych eisiau ei wneud?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Newid Monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Newid cerdyn Graffeg"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Dewisiadau newid Gwasanaethwr"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Newid Cydraniad"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Dangos gwybodaeth"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Profi eto"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Gadael"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Cadw'r newid?\n"
-"Y ffurfweddiad presenol yw:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X wrth ddechrau"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Hoffwn osod eich cyfrifiadur i gychwyn X yn awtomatig ar �l cychwyn\n"
-"Hoffech chi X i ddechrau wedi i chi ail-gychwyn?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Ail fewn gofnodwch i %s i wireddu'r newidiadau"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Allgofnodwch ac yna defnyddiwch Ctrl Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 lliw (8 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil o liwiau (15 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil o liwiau (16 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliwn o liwiau (24 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 biliwn o liwiau (32 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "16 MB neu fwy"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA safonol, 640x480 ar 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Uwch VGA, 800x600 ar 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Cydnaws a 8514, 1024x768 rhyngleswyd ar 87 Hz (nid 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 rhyngleswyd ar 87Hz, 800x600 ar 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 ar 60 Hz, 640x480 ar 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA di-rygnlesig, 1024x768 ar 60 Hz, 800x600 ar 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA Amledd Uchel, 1024x768 ar 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Aml-amledd sydd yn medru dangos 1280x1024 ar 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Aml-amledd sydd yn medru dangos 1280x1024 ar 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Aml-amledd sydd yn medru dangos 1280x1024 ar 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor sydd yn medru dangos 1600x1200 ar 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor sydd yn medru dangos 1600x1200 ar 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Adran gyntaf o'r rhaniad cychwyn"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Adran gyntaf o'r gyrrwr (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Gosodiad SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Lle ydych chi eisiau gosod y llwythwr cychwyn?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Gosodiad LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO gyda dewislen testun"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "Lilo gyda dewislen graffig"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Cychwyn o DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Prif ddewisiadau Bootloader"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Bootloader ar waith"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Gosodiad Bootloader"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dyfais cychwyn"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nid yw'n gweithio gyda hen BIOSau)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Cryno"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "cryno"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Modd fideo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Oedi cyn cychwyn delwedd rhagosodedig"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Cyfrinair"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Cyfrinair (eto)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Cyfyngu dewisiadau llinell orchymyn"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "cyfyngu"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Glanhau /tmp bob tro fyddwch yn cychwyn"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Union faint o RAM os oes angen (canfod %dMB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Galluogi aml-broffil"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Rhowch maint RAM mewn MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Dewis Nid yw 'cyfyngu dewisiadau llinell orchymyn' o werth heb gyfrinair"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Ceisiwch eto"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Nid yw'r cyfrineiriau'n cydfynd"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Neges Init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Agor Oedi Cadarnwedd"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Goramser cychwyn y cnewyllyn"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Galluogi cychwyn o CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Galluogi Cychwyn OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Systm Weithredu Rhagosodedig?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Rydych wedi penderfynnu gosod y llwythwr cychwyn ar raniad\n"
-"Mae hyn yn awgrymu bod gennych lwythwr cychwyn ar ddisg caled eisoes: (ee "
-"System Commander).\n"
-"\n"
-"Gyda pha ddisg ydych chi'n cychwyn?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Dyma'r cofnodion gwahanol.\n"
-"Mae modd i chi ychwanegu rhagor neu newid y rhai presennol."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Ychwanegu"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Gorffen"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Newid"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Pa fath o gofnod ydych chi eisiau ei ychwanegu?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Systwmau Gweithredu eraill (SunOS..)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Systemau Gweithredu Eraill (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Systemau gweithredu Eraill (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Delwedd"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Gwraidd"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Atodi"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Darllen-ysgrifennu"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabl"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Anniogel"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Label"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Rhagosodedig"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Maint intrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Tynnu cofnod"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Nid yw label gwag yn cael ei ganiatau"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Rhaid enwi delwedd cnewyllyn"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Rhaid pennu rhaniad cyfnewid"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Mae'r label hwn yn cael ei ddefnyddio eisoes"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Wedi canfod rhyngwynebau %s %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Oes gennych un arall?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Oes gennych rhyngwynebau %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Na"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Iawn"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Gweler gwyboadeth am galedwedd"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Gosod gyrrwr ar gyfer cerdyn %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modiwl %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Pa yrrwr %s ddylwn drio?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Mewn rhai achosion, mae gyrrwr %s angen gwybodaeth ychwanegol i weithio'n\n"
-"gywir, er fel rheol mae'n gweithio'n iawn hebddo. Hoffech chi enwi'r "
-"dewisiadau\n"
-"ychwanegol ar ei gyfer neu adael i'r gyrrwr archwilio'r peiriant am y "
-"wybodaeth mae\n"
-"ei angen? Weithiau bydd yr archwilio'n atal y peiriant, ond ni ddylai achosi "
-"unrhyw\n"
-"ddifrod"
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Atoholi"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Enwi dewisiadau"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Medrwch ddarparu ddewisiadau i fodiwl %s.\n"
-"Sylwer: wrth greu unrhyw gyfeiriad bydd angen defnyddio rhagddodiad 0x fel "
-"'0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Medrwch nawr ei ddewis i fodiwl. %s.\n"
-"Mae'r dewisiadau yn fformat ``name=value name2=value2 ...''.\n"
-"e.e, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Dewisiadau modiwl:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Methodd llwytho modiwl %s\n"
-"Hoffech chi drio eto gyda pharamedrau eraill?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "mynediad i raglenni  X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "mynediad i offer rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "caniat�u \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "mynediad i ffeiliau gweinyddol"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(wedi ychwanegu %s yn barod)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Mae'r cyfrinair yn rhy syml"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Rhowch enw defnyddiwr"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Rhaid i'r enw defnyddiwr gynnwys dim ond llythrennau bach, rhifau, '-' a '_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Mae'r enw defnyddiwr wedi ei ychwanegu yn barod"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Ychwanegu defnyddiwr"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Rhowch enw defnyddiwr\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Derbyn defnyddiwr"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Enw cywir"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Enw defnyddiwr"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Cragen"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Eicon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Awtomewngofnodi"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Medraf osod eich cyfrifiadur i fewngofnodi'nawtomatig ar gyfer un "
-"defnyddiwr\n"
-"Hoffech chi wneud hyn?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Dewis y defnyddiwr rhagosodedig:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Dewiswch y rheolwr ffenestr i rhedeg:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Dewiswch iaith i'w defnyddio."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Gallwch ddewis ieithoedd eraill fydd ar gael ar �l gosod"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Popeth"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Caniat�u pob defnyddiwr"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Arddull"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Dim rhannu"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Rhaid i becyn %s gael ei osod. Ydych chi am ei osod?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Medrwch allforio gan ddefnyddio NFS neu Samba. Pa un hoffech chi"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Mae pecyn gorfodol %s ar goll"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Dileu"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Cychwyn userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Mae rhannu yn �l defnyddiwr yn defnyddio \"rhannu ffeiliau\" grwp.\n"
-"Mae modd defnyddio userdrake i ychwanegu defnyddiwr i'r grwp."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Croeso i Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Gwael"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Safonol"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Uchel"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Uwch"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoia"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Rhaid defnyddio'r lefel hwn a gofal. Mae'n gwneud eich system yn haws ei\n"
-"ddefnyddio ond mae'n sensitif iawn: rhaid peidio ei ddefnyddio fel peiriant "
-"i'w\n"
-"gysylltu ag eraill nag i'r Rhyngrwyd. Does dim cysylltiad drwy gyfrinair."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Mae'r cyfrinair wedi ei alluogi, ond ni argymellir ei ddefnyddio fel "
-"cyfrifiadur rhwydwaith."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Dyma'r safon sy'n cael ei argymell ar gyfer diogelwch cyfrifiadur fydd yn "
-"cael ei gysylltu �'r Rhyngrwyd fel cleient."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Mae rhai cyfyngiadau, ac mae rhagor o wiriadau awtomatig yn cael eu rhedeg "
-"bob nos"
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Gyda'r lefel diogelwch hwn, mae defnydd y system fel gwasanaethwr yn "
-"bosibl.\n"
-"Mae diogelwch yn ddigon uchel i ddefnyddio'r system fel gwasanaethwr sy'n "
-"derbyn\n"
-"cysylltiad gan amryw o gleientiaid. Sylwer: os mae cleient yn unig yw eich "
-"peiriant ar y Rhyngrwyd, yna mae'n well i chi ddewis lefel is."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Wedi ei seilio ar y lefel flaenorol, ond mae'r system yn hollol gae�dig.\n"
-"Mae nodweddion diogelwch ar eu uchaf."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Dewiswch lefel diogelwch"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Lefel diogelwch"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Defnyddiwch libsafe ar gyfer gwasanaethwyr"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Llyfrgell sy'n diogelu rhag gorlif byffer ac ymosodiadau llinellau fformatio."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Croeso i %s y dewiswrsytemau gweithredu! \n"
-"\n"
-"Dewiswch system weithredu o'r rhestr uchod neu\n"
-"arhoswch %d eiliad am gychwyn rhagosodedig\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Croeso i GRUB, y dewiswr systemau gweithredu!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Defnyddiwch allweddi %c a %c i ddewis pa gofnod i'w amlygu."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Gwasgwch Enter i gychwyn y system weithredu, 'g' i olygu'r"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "gorchmynion cyn cychwyn, neu 'o' am y llinell orchymyn."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Bydd y cofnod wedi ei amlygu'n cychwyn yn awtomatig ymhen %d eiliad."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "dim digon o le yn /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Penbwrdd"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Dewislen Cychwyn"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Nid oes modd gosod y llwythwr cychwyn ar adran %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "nid yw cymorth wedi ei weithredu eto.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Ffurfweddu'r Math o Gychwyn"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Ffeil"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Ffeil/_Gadael"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor Categoreiddio Math Newydd"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor Math Newydd"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor traddodiadol"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Gtk+ Traddodiadol"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Cychwyn Auora wrth gychwyn y cyfrifiadur"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Modd Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Modd Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Ryych yn defnyddio %s fel Rheolwr Cychwyn.\n"
-"Cliciwch Ffurfweddu i gychwyn dewin gosod"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Ffurfweddu"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Modd System"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Cychwyn y system  X-Window o'r cychwyn"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Na, tydw i ddim eisiau awto-mewngofnodi"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Iawn, rwyf eisiau awto-mewngofnodi gyda (defnyddiwr, penbwrdd)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Iawn"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "maethu agor/etc/inittab ar gyfer darllen: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d munud"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 munud"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d eiliad"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Nid wyf yn medru creu lluniau o'r sgrin cyn rhannu"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Bydd lluniau o'r sgrin ar gale ar �l gosod yn %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Ffrainc"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Gwlad Belg"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Gweriniaeth Tsiec"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Yr Almaen"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Groeg"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norwy"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Sweden"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Yr Iseldiroedd"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Yr Eidal"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Awstria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Yr Unol Daleithiau"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Gwnewch gopi wrth gefn o'ch data yn gyntaf"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Darllenwch yn ofalus!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Os ydych yn bwriadu defnyddio aboot, gofalwch adael lle gwag (2048 sector yn "
-"ddigon)\n"
-"ar ddechrau'r ddisg."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Gwall"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Dewin"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Dewiswch weithred"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Mae gennych un rhaniad FAT mawr\n"
-"(yn cael ei ddefnyddio gan Microsoft Dos/Windows\n"
-"Awgrymaf eich bod yn newid maint y rhaniad\n"
-"(cliciwch arno, ac yna clicio \"Newid maint\"]"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Cliciwch ar raniad"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Manylion"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "jwrnaleiddiwyd FS?"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Gwag"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Arall"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Mathau ffeil-system:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Creu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Math"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Defnyddiwch \"%s\" yn lle hynny"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Dileu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Defnyddiwch \"Dad-osod\" yn gyntaf"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Wedi newid y math o raniad %s bydd yr holl ddata ar y rhaniad yn cael ei "
-"golli"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Dewiswch raniad"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Dewiswch rhaniad arall"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Gadael"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Cyffredinol > Arbennigwr"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Arbennigwr > Cyffredinol"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Dadwneud"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Parhau beth bynnag?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Gorffen heb arbed"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Gorffen heb ysgrifennu y tabl rhaniadau?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ydych eisiau cadw newidiadau /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Awto ddynodi"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Clirio i gyd"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Gwybodaeth am y ddisg caled"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Mae pob rhaniad cynradd wedi ei ddefnyddio"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Alla'i ddim ychwanegu unrhyw raniadau ychwanegol"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "I gael mwy o raniadau, dil�wch un er mwyn gallu creu rhaniad estynedig"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Cadw'r tabl rhaniad"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Adfer y tabl rhaniad"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Achub y tabl rhaniadau"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ail-lwytho'r tabl rhaniad"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Cyfrwng symudadwy'n awto-osod"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Dewiswch ffeil"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Nid oes gan y tabl rhaniad wrth gefn yr un maint\n"
-"Parhau?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Rhybudd"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Rhowch flopi yn y disg-yrrwr\n"
-"Mi fydd yr holl wybodaeth ar y fflopi yma yn gael ei ddileu"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Yn trio achub y tabl rhaniadau"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Gwybodaeth fanwl"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Pwynt gosod"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Dewisiadau"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Newid maint"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Symud"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Fformatio"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Gosod"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Ychwanegu i RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Ychwanegu i LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Dad-osod"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Tynnu o RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Tynnu o LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Newid RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Defnyddiwch ar gyfer cylchol"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Creu rhaniad newydd"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sector dechreuol: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Maint mewn MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Math o ffeilsystem: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Pwynt gosod:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Dewis"
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Tynnu'r ffeil cylch-ol?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Newid math y rhaniad"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Pa fath o system ffeil  ydych chi eisiau?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Newid o ext2 i ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Lle'r hoffech chi odod y ffeil cylch-ol %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Lle ydych am osod dyfais %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Methu dad setio'r pwynt gosod gan fod y rhaniad yn cael ei ddefnyddio ar "
-"gyfer cylch-ol\n"
-"Tynnu'r cylch-ol yn gyntaf"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Cyfrifo ffiniau system ffeiliau FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Newid maint"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Nid oes modd newid maint y rhaniad"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Dylai'r holl ddata ar y rhaniad gael ei ategu"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Ar �l newid maint rhaniad %s, bydd yr holl ddata ar y rhaniad yma yn cael ei "
-"golli"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Dewiswch y maint newydd"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Maint mewn MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Pa sector hoffech chi symud iddo?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Symud"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Yn symud rhaniad.."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Dewis RAID presennol i ychwanegu iddo"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "newydd"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Dewis LVM presennol i ychwanegu iddo"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Enw LVM"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Niid oes modd defnyddio'r rhaniad ar gyfer cylch-ol"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Cylch-ol"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Enw ffeil cylch-ol"
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Rhowch enw ffeil"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Mae'r ffeil yn cael ei ddweis eisoes gam gylch-ol arall, dewiswch un arall"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Mae'r ffeil yn bodoli eisoes. Defnyddiwch hwn?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Dewisiadau gosod"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Amrywiol"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dyfais"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "lefel"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "maint darn"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Byddwch ofalus: mae'r weithred hon yn beryglus"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Pa fath o rhaniad %s"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Mae'n flin gen i ond ni alla'i dderbyn creu /boot mor bell o ddechrau'r disg "
-"(ar silindr > 1024).\n"
-"Naill ai nad ydych yn defnyddio LILO a ddim angen /boot neu byddwch yn "
-"defnyddio LILO a ni fydd yn gweithio."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Mae'r rhaniad rydych wedi dewis ychwanegu fel y gwraidd (/) wedi'i leoli yn "
-"bellach na 1024ed silindr eich disg a nid oes gennych rhaniad /boot.\n"
-"Os ydych yn bwriadu defnyddio y rheolwr bwtio LILO, nodwch fe ddylech greu "
-"rhaniad /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Rydych wedi dewis meddalwedd rhannu RAID fel gwraidd (/)\n"
-"Nid oes llwythwr cychwyn yn medru trin hwn heb rhaniad /boot\n"
-"Cofiwch ychwanegu rhaniad /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Mae tabl rhaniad disg-yrrwr %s am gael ei ysgrifennu i'r disg!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Mi fydd angen i chi ail-fwtio cyn i'r newidiadau gymeryd lle"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Wedi fformatio rhaniad %s, bydd yr holl ddata ar y rhaniad yn cael ei golli"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Fformatio"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Yn fformatio ffeil cylch-ol %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Yn fformatio rhaniad %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Cuddio ffeiliau"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Symud ffeiliau i'r rhaniad newydd"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Mae cyfarwyddiadur %s eisoes yn cynnwys peth data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Symud ffeiliau i'r rhaniad newydd"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Cop�o %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Tynnu %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Mae rhaniad %s yn cael ei alw'n %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dyfais: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Llythyren disg-yrrwr yn DOS: %s (dim ond dyfalu)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Math: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Enw :"
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Dechrau: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Maint: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sector"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindr %d i silindr %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Wedi fformatio\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Heb ei fformatio\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Gosodwyd\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Ffeil(iau) Cylch-ol:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Y rhaniad i'w bwtio fel rheol\n"
-"    (ar gyfer bwt MS-DOS, nid ar gyfer lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Lefel %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Maint darn %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Disg RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Enw ffeil cylch-ol: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Mwy na thebyd rhaniad Gyrrwr\n"
-"yw'r rhaniad hwn. Gwell gadael\n"
-"llonnydd iddo.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Mae'r rhaniad Bootstrap\n"
-"hwn ar gyfer cychwyniad\n"
-"dwbl eich system\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Maint: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometreg: %s silindr, %s pen, %s sector\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Gwybodaeth:"
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Diag LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Math tabl rhaniad: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ar fws %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Dewisiadau: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Allwedd amgryptio system ffeil : "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Dewiswch eich allwedd amgryptio system ffeiliau"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Mae'r allwedd amgryptio'n rhy syml ( mae'n rhaid bod o leiaf %d nod o hyd)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Nid yw'r allweddi amgryptio'n cydfynd"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Allwedd amgryptio"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Allwedd amgryptio (eto)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Newid y math"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Cliciwch ar gyfrwng"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Chwiliwch am wasanaethwyr"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "mi fethodd y %s fformatio o %s"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nid wyf yn gwybod sut i fformatio %s ym math %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "methodd gosod rhaniad %s yng gnhyfeiriadur %s"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "methodd fdisk gyda cod gadael %d neu arwydd %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "gwall dadosod %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "syml"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "gyda /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "Gwasanaethwr"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Does dim modd defnyddio JFS ar rhaniadau llai na 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Does dim modd defnyddio ReiserFS ar gyfer rhaniadau llai na 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Rjhaid i bwyntiau gosod gynnwys / arweiniol"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Mae yna eisoes raniad gyda pwynt gosod %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Does dim modd defnyddio Cyfrol Rhesymegol LVM ar gyfer pwynt gosod %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Dyai'r cyfeiriadur aros o fewn y system ffeilio gwraidd"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Mae angen gwir system ffeilio (ext2, reiserfs) ar gyfer y pwynt gosod\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Does dim modd defnyddio Cyfrol Rhesymegol LVM ar gyfer pwynt gosod %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nid oes digon o le ar gyfer awtoddynodi"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Dim i'w wneud"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Gwall wrth agos %s ar gyfer ysgrifennu %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Digwyddodd gwall - ni chanfyddwyd dyfeisiadau dilys i greu systemau ffeil "
-"arnynt. Gwiriwch eich caledwedd am ffynhonell yr anhawster."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Does gennych chi ddim rhaniadau!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"Mae GNU/Linux yn system aml-ddefnyddiwr, ac mae hyn yn golygu bod pob\n"
-"defyddiwr yn medru cael ei ddewisiadau ei hun, ei ffeiliau ei hun ac yn y "
-"blaen.\n"
-"Gallwch ddarllen yr \"User Guide\" i ddysgu mwy. Ond yn anhebyg i \"gwraidd"
-"\", sef\n"
-"y gweinyddwr, ni fydd modd i'r defnyddiwr fyddwch yn eu creu yma'n medru\n"
-"newid dim ond eu ffeiliau a'u ffurfweddiad ei hun. Bydd rhaid i chi greu un\n"
-"defnyddiwr cyffredin ar gyfer chi eich hun. Dyma'r cyfrif ddylech "
-"mewngofnodi\n"
-"iddo ar gyfer defnydd bob dydd. Er ei fod yn ymarferol iawn i fewngofnodi "
-"fel\n"
-"\"root\" gall fod yn beryglus iawn!. Gall y camgymeriad lleiaf olygu nad yw "
-"eic\n"
-"system yn gweithio ragor. Os wnewch chi gamgymeriad mawr  fel defnyddiwr\n"
-"cyffredin, byddwch ond yn colli rhywfaint o wybodaeth, ac nid y system "
-"gyfan.\n"
-"Yn gyntaf rhowch eich enw go iawn. Dose dim rhaid, wrth gwrs  - mae modd\n"
-"i chi rhoi beth bynnag hoffech chi. Bydd DraX yn cymryd yr enw cyntafa'i roi "
-"yn\n"
-"yr \"Enw defnyddiwr\" Dyma'r enw bydd y defnyddwr hwn yn ei ddefnyddio i\n"
-"fewngofnodi i'r system. Mae modd ei newid.  Yna rhowch gyfrinair. Nid yw\n"
-"cyfrianair defnyddiwr cyffredin mor bwysig ag un \"gwraidd\" o safbwynt "
-"diogelwch\n"
-"ond nid yw hynny'n rheswm i'w esgeuluso - wedi'r cyfan mae eich ffeiliau "
-"mewn\n"
-"perygl\n"
-"\n"
-"Os wnewch chi glicio \"Derbyn Defnyddiwr\", bydd modd ychwanegu fanint\n"
-"fynnoch. Ychwanegwch ddefnyddiwr ar gyfer pob un o'ch ffrindiau: eich tad\n"
-"neu eich chwaer, e.e. Ao �l ychwanegu'r holl ddefnyddwyr, cliciwch \"Gorffen"
-"\".\n"
-"\n"
-"Bydd clicio'r botwm \"Uwch\" yn caniat�u i chi newid y \"gragen\" "
-"rhagosodedig\n"
-"ar gyfer y defnyddiwr hwnnw (bash yw'r rhagosodedig)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Dyma'r rhaniadau Linux sydd wedi canfod ar eich disg caled\n"
-"Gallwch gadw'r dewisiadau sydd wedi eu gwneud gan y dewin, mae'n nhw'n iawn\n"
-"ar gyfer y rhanfwyaf o osodiadau. Os ydych am wneud newidiadau, rhaid i chi "
-"ol eiaf\n"
-"ddiffinio rhaniad gwraidd (\"/\"). Peidiwch dewis rhaniad sy'n rhy fach neu "
-"fyddwch\n"
-"yn methu llwytho digon o feddalwedd. Os hoffech gadw eich data ar raniad "
-"arall,\n"
-"bydd angen i chi greu rhaniad ar gyfer \"/home\"( ond dim ond os oes mwy nag "
-"un\n"
-"rhaniad Linux ar gael)\n"
-"Mae pob rhaniad yn cael ei restri fel hyn: \"Enw\", \"Maint\".\n"
-"\n"
-"Mae \"Enw\" yn cael ei drefnu: \"math o ddisg caled\", rhif y disg caled\",\n"
-"\"rhif rhaniad\" (e.e, \"hda1\").\n"
-"\n"
-"\"Math o ddisg caled\" yw \"hdos mai disg caled IDE sydd gennych a\n"
-"\"sd\" os mai SCSI yw'r disg caled.\n"
-"\n"
-"Mae \"Rhif Disg Caled\" yn lythyren ar �l \"hd\" neu \"sd\". Ar gyfer\n"
-"disg caled IDE mae:\n"
-"\n"
-" * \"a\" yn golygu \"prif ddisg caled ar y rheolwr IDE cyntaf\",\n"
-"\n"
-" * \"b\" yn golygu \"disg caled gwas ar y rheolwr IDE cyntaf\",\n"
-"\n"
-" * \"c\" yn golygu \"prif ddisg caled ar yr ail reolwr IDE\",\n"
-"\n"
-" * \"d\" yn golygu \"disg caled gwas ar yr ail reolwr IDE\".\n"
-"\n"
-"Gyda disgiau caled SCSI, mae \"a\" yn golygu \"ID SCSI isaf \", a \"b\" yn "
-"golygu\n"
-"\"ID SCSI ail isaf\", ag ati."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mae gosodiad Mandrake Linux ar gael ar draws nifer o CD-ROM. Mae DrakX\n"
-"yn gwybod os yw pecyn penodol wedi ei leoli ar CD-ROM arall a bydd yn bwrw\n"
-"allan yr CD cyfredol a gofyn am y llall.."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Mae'n amser penderfynu pa raglenni rydych am eu gosod ar eich\n"
-"system. Mae yna filoedd o becynnau ar gael ar gyfer Mandrake Linux, ond\n"
-"does dim disgwyl i chi wybod amdanyn nhw i gyd.\n"
-"\n"
-"Os ydych chi'n gwneud gosodiad safonol o'r CD-ROM, bydd gofyn i chi\n"
-"ddweud pa CDau sydd gennych. Gwiriwch labeli'r CDau ac amlygu'r blychau\n"
-"sy'n cyfateb i'r CDau sydd gennych ar gyfer y gosodiad. Cliciwch \"Iawn\"\n"
-"pan ydych yn barod i barhau.\n"
-"\n"
-"Mae'r pecynnau wedi eu didoli yn grwpiau sy'n cyfateb i ddefnydd penodol\n"
-"ar eich peiriant. Mae'r grwpiau wedi eu rhannu yn bedair adran:\n"
-"\n"
-" * \"Man Gwaith\": os ydych yn bwriadu defnyddio eich peiriant fel man\n"
-"gwaith yna dewiswch un o'r grwpiau cyfatebol.\n"
-"\n"
-" * \"Datblygiadol\": os yw'r peiriant yn cael ei ddefnyddio i raglenni, "
-"dewiswch\n"
-" y grwpiau perthnasol\n"
-"\n"
-" * \"Gwasanaethwr\": os ydych am i'r peiriant gael ei ddefnyddio fel\n"
-"gwasanaethwr bydd modd i chi ddewis y gwasanaethau cyffredin rydych am\n"
-"eu cael ar eich peiriant.\n"
-"\n"
-" * \"Amgylchedd Graffigol\": dyma'r lle i ddewis eich amgylchedd graffigol.\n"
-"Rhaid dewis o leiaf un er mwyn cael man gwaith graffigol!\n"
-"\n"
-"Bydd symud cyrchwr y llygoden dros enw grwp yn amlygu esboniad byr am y\n"
-"grwp hwnnw. Os ydych wedi dad-ddewis pob grwp wrth wneud gosodiad\n"
-"arferol ac nid uwchraddiad), bydd dialog yn ymddangos a chynnig\n"
-"dewisiadau amrywiol ar gyfer y gosodiad lleiaf\n"
-"\n"
-" * \"Gyda X\" Gosod y nifer lleiaf o becynnau i gael penbwrdd graffigol\n"
-"i weithio.\n"
-"\n"
-" * \"Gyda dogfennaeth elfennol\" Gosod y system sylfaenol yn ogystal\n"
-"a gwasanaethau elfennol a'u dogfennau. Mae'r gosodiad hwn yn addas\n"
-"ar gyfer gosod gwasanaethwr.\n"
-"\n"
-" * \"Gosodiad bychan iawn\" Gosod y lleiafswm posibl i greu system Linux\n"
-"llinell orchymyn weithredol. Tua 65MB o faint.\n"
-"\n"
-"Mae clicio blwch \"Dewis pecynnau unigol\". yn ddefnyddiol os ydych\n"
-"yn gyfarwydd gyda'r pecynnau sy'n cael eu cynnig neu os ydych eisiau\n"
-"rheolaeth lwyr dros yr hyn sy'n cael ei osod\n"
-"\n"
-"Os ydych wedi cychwyn y gosodiad ym modd \"Diweddaru\", bydd modd i\n"
-" chi ddad-ddewis pob grwp er mwyn osgoi gosod unrhyw becyn newydd.\n"
-"Mae hyn yn ddefnyddiol ar gyfer trwsio neu ddiweddaru system sy'n bod "
-"eisoes.\n"
-" "
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Yn olaf, yn dibynnu ar eich dewis o becynnau unigol, bydd coeden yn cynnwys\n"
-"yr holl becynnau wedi eu dosbarthu yn �l grwp ac is grwp. Wrth bori'r "
-"goeden,\n"
-"gallwch ddewis grwp cyfan, isgrwp neu becyn unigol.\n"
-"\n"
-"Pryd bynnag fyddwch wedi dewis pecyn ar y goeden, bydd disgrifiad yn\n"
-"ymddangos ar y dde. Pan fyddwch wedi gorffen dewis , cliciwch y botwm\n"
-" \"Gosod\" fydd yn cychwyn y drefn osod. Gan ddibynnu ar gyflymder eich\n"
-"caledwedd a'r nifer o becynnau i'w gosod, gall gymryd peth amser i'w "
-"gwblhau.\n"
-"Bydd amser tan orffen yn cael ei ddangos ar y sgrin er mwyn i chi weld a "
-"oes\n"
-"amser i wneud paned!\n"
-"\n"
-"!! Os oes pecyn gwasanaethwr wedi ei ddewis yn fwriadol neu am ei fod yn "
-"rhan\n"
-"o grwp cyfan, bydd angen i chi gadarnhau eich bod eisiau i'r gwasanaethwyr\n"
-"gael eu gosod. Ym Mandrake Linux mae unrhyw wasanaethwr sydd wedi ei\n"
-"osod yn cael ei gychwyn fel rhagosodiad wrth gychwyn. Hyd yn oed os ydynt\n"
-"yn ddiogel a doedd dim materion pryder pan gafodd y dosbarthiad ei ryddhau,\n"
-"mae'n bosibl i fylchau diogelwch gael eu darganfod wedi i'r fersiwn hwn o\n"
-"Mandrake Linux gael ei gwblhau. Os nad ydych yn gwybod beth mae\n"
-"gwasanaeth arbennig i fod i'w wneud na pham mae wedi ei osod, yna cliciwch\n"
-"\"Na\". Bydd clicio \"Iawn\" yn gosod y gwasanaethau hynny a byddant yn\n"
-"cael eu cychwyn yn ddiofyn drwy ragosodiad!!\n"
-"\n"
-"Mae'r dewis \"Dibyniad Awtomatig\"yn analluogi'r deialog rhybudd sy'n\n"
-"ymddangos bob tro fydd y gosodwr yn dewis pecyn yn awtomatig.\n"
-"Mae hyn yn digwydd am ei fod wedi penderfynu ei fod angen bodloni\n"
-"dibyniad gyda phecyn arall er mwyn cwblhau'r gosodiad yn llwyddiannus\n"
-"\n"
-"Mae'r eicon disg medal bychan ar waelod y rhestr yn caniat�u llwytho'r\n"
-"rhestr pecynnau dewiswyd yn ystod gosodiad blaenorol. Bydd clicio\n"
-"ar yr eicon hwn yn gofyn i chi osod yn y peiriant disg meddal gr�wyd ar\n"
-"ddiwedd gosodiad arall. Gwelwch yr ail neges o'r cam diwethaf ar sut i\n"
-"greu disg meddal o'r fath."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Dyma eich cyfle i gysylltu gyda'r rhyngrwyd/rhwydwaith.Os hoffech chi\n"
-"gysylltu eich cyfrifiadur i'r Rhyngrwyd neu i rwydwaith lleol, cliciwch\n"
-"\"Iawn\" . Bydd awtoganfod dyfeisiadan rhwwydwaith a modem yn\n"
-"cychwyn. Os yw'r canfod yn methu, dad-diciwch y blwch \"Defnyddiwch\n"
-"awto ganfod\" y tro nesaf. Mae gennych y dewis i beidio ffurfweddi eich\n"
-"rhwydwaith, neu i'w wneud rhywbryd eto. Os fell, cliciwch y botwm  \"Diddymu"
-"\".\n"
-"\n"
-"Cysylltiadau posib: modem traddodiadol,modem IDSN, cyswllt ADSL,\n"
-"modem cable ac yn olaf cyswllt LAN syml (Ethernet).\n"
-"\n"
-"Byddwn ni ddim yn mynd i fanylion y ffurfweddiad yma. Gwnewch yn siwr\n"
-"fod gennych yr holl fanylion gan eich darparwr gwasanaeth rhyngrwyd (ISP)\n"
-"neu weinyddwr system\n"
-"\n"
-"Mae modd i chi edrych ar bennawd yn y llawlyfr ar gyswllt a'r Rhyngrwyd am\n"
-"fanylion ffurfweddiad, neu aros nes i'ch system gael ei osod a defnyddio'r\n"
-"rhaglen sydd yno i ffurfweddu eich cyswllt.\n"
-"\n"
-"Os ydych am ffurfweddu eich rhwydwaith yn hwyrach ar �l y gosodiad neu\n"
-"os ydych wedi gorffen ffurfweddi eich cyswllt a'r rhwydwaith, yna cliciwch\n"
-"\" Diddymu.\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Mae modd i chi ddewis pa wasanaethau rydych am eu cychwyn\n"
-"wrth gychwyn eich cyfrifiadur.\n"
-"\n"
-"Dyma'r holl wasanaethau sydd ar gael gyda'r gosodiad cyfredol. Darllenwch\n"
-"y rhestr yn ofalus a dad-diciwch y rhai nad oes eu hangen bob tro wrth "
-"gychwyn.\n"
-"\n"
-"Mae modd cael esboniad byr am wasanaeth wrth eu dewis. Ond, os nad ydych\n"
-"yn siwr a yw'r gwasanaeth o werth neu beidio, mae'n well cadw at y drefn\n"
-"rhagosodedig\n"
-"\n"
-"!!Mae angen i chi fod yn ofalus iawn os ydych am ddefnyddio eich peiriant\n"
-"fel gwasanaethwr: mwy na thebyg na fyddwch eisiau cychwyn unrhyw\n"
-"wasanaethau nad oes eu hangen. Cofiwch bod cael nifer o wasanaethau\n"
-"wedi eu galluogi ar y gwasanaethwr, fod yn beryglus. Yn gyffredinol,\n"
-"mae'n well dewis dim ond y gwasanaethau mae'n rhaid eu cael.\n"
-"!!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr "Mae gGNU/Linux yn rheoli amser drwy GMT (Greenwich Mean Time)"
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (am X Window System) yw calon rhag wyneb graffigol GNU/Linux\n"
-"y mae pob amgylchedd graffig megis KDE, Gnome, AfterStep\n"
-"WindowMaker ag ati, sydd o fewn Mandrake Linux, yn dibynnu. Yn yr\n"
-"adran hon bydd DrakX yn ceisio ffurfweddu  X yn awtomatig.\n"
-"\n"
-"Mae'n anarferol iddo fethu oni bai bod y caledwedd yn hen iawn (neu yn\n"
-"newydd iawn). Os yw'n llwyddo, bydd yn cychwyn X ar y  X cydraniad\n"
-"gorau posibl yn ddibynnol ar faint y monitor. Bydd ffenestr yn ymddangos\n"
-"gan ofyn os ydych yn ei weld.\n"
-"\n"
-"Os ydych yn gwneud gosodiad \"Arbenigwr\", byddwch yn defnyddio'r \n"
-"dewin ffurfweddu  X. Gwelwch yr adran gyfatebol o'r llawlyfr am ragor o\n"
-"wybodaeth am y dewin.\n"
-"\n"
-"Os ydych yn medru gweld y neges ac ateb \"Iawn\", yna bydd DrakX yn\n"
-"mynd ymlaen i'r cam nesaf. Os nad ydych yn gweld y neges mae'n golygu\n"
-"bod y ffurfweddiad yn anghywir a daw i ben ymhen 10 eiliad, gan adfer y "
-"sgrin."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Efallai na fyddwch yn fodlon iawn gyda dagosiad ffurfweddiad X y tro\n"
-"cyntaf fyddwch yn ei ddefnyddio (sgrin yn rhy fach, i un ochr, ag ati)\n"
-"Felly mae DrakX yn gofyn i chi os yw'r ffurfweddiad yn iawn. Bydd\n"
-"hefyd yn cynnig ei newid drwy gynnig restr o foddau dilys daeth o hyd\n"
-"iddynt, i chi gael dewis un.\n"
-" \n"
-"Os nad ydych yn medru cael  X i weithio, dewiswch \" Newid cerdyn graffig"
-"\",\n"
-"dewiswch \"Cerdyn heb ei restri\", ac yna wrth ddewis gwasanaethwr, dewis\n"
-"\"FBDev\". Mae hwn yn ddewis diogelwch sy'n gweithio gydag unrhyw gerdyn\n"
-"graffig modern. Dewiswch \" Profwch eto\" i fod yn siwr."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Yn y diwedd bydd gofyn i chi ddewis os ydych am weld rhyngwyneb graffig\n"
-"wrth gychwyn y cyfrifiadur. Sylwch y bydd y cwestiwn hwn yn cael ei ofyn\n"
-"hyd yn oed os nad ydych yn dewis profi'r ffurfweddiad. Yn amlwg, byddwch\n"
-"am ateb \"Na\" os yw eich peiriant i weithredu fel gwasanaethwr, neu os\n"
-"nad oeddech yn llwyddiannus yn cael eich dangosydd i ffurfweddu'n gywir.."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mae gan yr CD-ROM Mandrake Linux modd achub. Gallwch ei gyrraedd drwy\n"
-"gychwyn y peiriant o'r CD-ROM, gwasgu'r fysell >>F1<< o'r cychwyn a theipio\n"
-" >>rescue<<wrth yr anogwr. Ond os nad yw eich cyfrifiadur yn medru cychwyn\n"
-"drwy'r CD-ROM dylech ddod yn �l i'r cam hwn am gymorth mewn o leiaf dwy "
-"sefyllfa:\n"
-"\n"
-" *wrth lwytho'r llwythwr cychwyn, bydd DrakX yn ailysgrifennu'r adran bwtio "
-"[MBR]\n"
-"ar eich prif ddisg [oni bai eich bod yn defnyddio rheolwr cychwyn arall] fel "
-"eich bod\n"
-"yn medru cychwyn yn Windows neu GNU/Linux [gan gymryd bod gennych Windows\n"
-"ar eich system]. Os fyddwch angen ailosod Windows, bydd proses osod "
-"Microsoft yn\n"
-"ail ysgrifennu'r adran bwtio, ac felly ni fydd modd i chi gychwyn GNU/"
-"Linux!\n"
-"\n"
-" * os oes anhawster yn codi ac nid ydych yn medru cychwyn GNU/Linux o'r "
-"ddisg\n"
-"caled, y ddisg feddal fydd yr unig ffordd i gychwyn GNU/Linux.Mae'n cynnwys\n"
-"nifer dda o offer i adfer y system, gwall teipio anffodus, camdeipio "
-"cyfrinair neu\n"
-"rhesymau eraill\n"
-"\n"
-"Pan fyddwch yn clicio ar y cam hwn, bydd gofyn i chi rhoi disg meddal yn y "
-"gyrrwr.\n"
-"Rhaid i'r ddisg fod yn wag neu fod dim gwahaniaeth colli'r data arno.Does "
-"dim\n"
-"angen ei fformatio gan y bydd DrakX yn ailysgrifennu'r holl ddisg."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Yn awr mae angen i chi ddewis lle ar eich disg caled i osod eich\n"
-"system weithredu Linux Mandrake. Os yw eich disg caled yn wag neu\n"
-"os oes yna system weithredol eisoes yn cymryd yr holl le sydd ar gael,\n"
-"bydd angen i chi greu rhaniadau arno.Yn y bon, mae rhannu disg caled\n"
-"yn golygu ei rhannu'n rhesymegol i greu lle i osod eich system Mandrake\n"
-"Linux newydd.\n"
-"\n"
-"Gan bo effaith y broses rannu'n ddidroi n�l gall creu rhaniadau fod yn "
-"broses\n"
-"bygythiol a straenus os ydych yn ddefnyddiwr dibrofiad. Yn ffodus, mae na\n"
-"ddewin sy'n symleiddio'r broses. Cyn cychwyn, darllenwch y llawlyfr a\n"
-"cymerwch bwyll.\n"
-"\n"
-"Os ydych yn rhedeg y gosodiad ym modd Arbenigwr, byddwch yn agor\n"
-"DiskDrake, rhaglen rhannu Mandrake Linux, sy'n caniat�u i chi wneud m�n\n"
-"newidiadau i'ch rhaniadau. Gw. pennawd DiskDrake yn y llawlyfr. O'r\n"
-"rhyngwyneb gosod, gallwch ddefnyddio'r dewiniaid drwy glicio ar fotwm\n"
-"\"Dewin\" yn y ddeialog.\n"
-"\n"
-"Os oes yna raniadau wedi eu diffinio, un ai o osodiad blaenorol neu\n"
-"gan offeryn rhannu arall, dewiswch y rheini i osod eich system Linux.\n"
-"\n"
-"Os nad oes rhaniadau wedi eu diffinio, bydd angen i chi eu creu gan\n"
-"ddefnyddio'r dewin. Gan ddibynnu ar ffurfweddiad eich disg caled, mae\n"
-"nifer o ddewisiadau ar gael:\n"
-"\n"
-" * \"Defnyddiwch lle gwag\": mae'r dewis hwn yn arwain at greu rhaniadau\n"
-"awtomatig o'ch disg(iau) caled. Bydd dim cwestiynau eraill.\n"
-"\n"
-" * \"Defnyddiwch y rhaniad cyfredol\": mae'r dewin wedi canfod un neu fwy\n"
-"o raniadau Linux cyfredol ar eich disg caled. Os ydych am eu defnyddio,\n"
-"cliciwch y dewis hwn.\n"
-"\n"
-" * \"Defnyddiwch le gwag ar raniad Windows\": os yw Microsoft Windows ar\n"
-"eich disg caled ac yn cymryd y lle i gyd, bydd rhaid i chi greu lle ar gyfer "
-"data\n"
-"Linux. I wneud hynny gallwch ddileu eich rhaniad a data Microsoft Windows\n"
-"(gw. atebion\"Dileu'r ddisg gyfan\" neu \"Modd Arbenigwr) neu ail-lunio "
-"maint\n"
-"rhaniad Microsoft Windows. Mae modd ail lunio maint y rhaniad heb golli "
-"data.\n"
-"Argymhellir gwneud hyn os ydych am ddefnyddio Mandrake Linux a Microsoft\n"
-"Windows ar yr un cyfrifiadur.\n"
-"\n"
-"  Cyn gwneud y dewis hwn, cofiwch y bydd maint eich rhaniad Microsoft "
-"Windows\n"
-"yn llai nag yw ar hyn o bryd. Bydd gennych llai o le yn Microsoft Windows i "
-"gadw\n"
-"data neu i osod meddalwedd newydd.\n"
-"\n"
-" * \"Dileu'r holl ddisg\" os ydych am ddileu'r holl ddata a rhaniadau "
-"presennol\n"
-"ar eich disg caled a'u cyfnewid am system Mandrake Linux, yna dewiswch hwn.\n"
-"Byddwch yn ofalus wrth wneud hyn gan na fydd modd troi'n �l ar �l "
-"cadarnhau.\n"
-"\n"
-"  !! Os ydych yn dewis hwn, byddwch yn colli'r holl ddata ar eich disg.  !!\n"
-"\n"
-" * \"Tynnu Windows\": bydd hwn yn dileu popeth o'r disg caled a chychwyn "
-"popeth\n"
-"o'r newydd, gan gynnwys creu rhaniadau newydd. Bydd yr holl ddata ar y ddisg "
-"yn\n"
-"cael ei golli\n"
-"\n"
-"  !! Os ydych yn dewis hwn, byddwch yn colli'r holl ddata ar eich disg.  !!\n"
-"\n"
-" * \"Modd Arbenigwr\": dewiswch hwn os ydych am rannu'r disg caled\n"
-"gyda llaw. Byddwch ofalus - mae'n ddewis pwerus a pheryglus. Mae modd\n"
-"i chi golli'ch holl ddata. Peidiwch dewis hwn oni bai eich bod yn gwybod "
-"beth\n"
-"ydych yn ei wneud."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Dyna ni. Mae'r gosodiad wedi ei gwblhau ac mae eich system GNU/Linux\n"
-"yn barod i'w ddefnyddio. Cliciwch \"Iawn\" i ailgychwyn y peiriant. Mae "
-"modd\n"
-"i chi gychwyn GNU/Linux neu Windows, prun bynnag sydd orau gennych\n"
-"(os oes gennych y ddwy system ar eich peiriant), gynted ag y bydd eich\n"
-"peiriant yn ail gychwyn. \n"
-"\n"
-"Mae'r botwm \"Uwch\" yn dangos dau fotwm:\n"
-"\n"
-" *\" creu disg meddal awto-gosod\": i greu disg meddal gosod fydd yn creu\n"
-"gosodiad cyflawn heb gymorth gweithredwr, yn debyg i'r gosodiad sydd\n"
-"newydd ei ffurfweddu.\n"
-"\n"
-"Sylwer bod dau ddewis gwahanol i'w gael wedi clicio'r botwm:\n"
-"\n"
-" *\"Ail chwarae\". Gosodiad rhannol awtomatig gan bod y cam o greu rhaniad\n"
-"yn cael ei hepgor.\n"
-"\n"
-" *Awtomeiddio\".Gosodiad cwbl awtomatig: mae'r disg caled wedi ei\n"
-"ailysgrifennu'n llwyr, a'r holl ddata wedi ei golli.\n"
-"\n"
-"Mae hwn yn nodwedd ddefnyddiol iawn pan yn gosod ar nifer fawr o beiriannau\n"
-"tebyg. Gw. yr adran Auto install ar ein safle gwe.\n"
-"\n"
-" *\"Cadw'r dewis o becynnau\": mae hyn yn cadw'r dewis o becynnau wnaed\n"
-"cynt. Yna wrth wneud gosodiad arall, rhowch ddisg meddal yn y gyrrwr a "
-"rhedeg\n"
-"y gosodiad gan fynd i'r sgrin cymorth drwy wasgu'r fysell [F1], a chyflwyno\n"
-">>linux defcfg=\"disg meddal\"<<.\n"
-"\n"
-"(*) Bydd angen disg meddal wedi ei fformatio fel FAT (i greu un yn GNU/"
-"Linux,\n"
-"teipiwch \"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Rhaid i bob rhaniad sydd newydd eu henwi gael eu fformatio ar gyfer eu\n"
-"defnyddio (mae fformatio'n golygu creu system ffeilio)\n"
-"\n"
-"Efallai y byddwch eisiau ailfformatio rhai rhaniadau presennol i ddileu "
-"data\n"
-"sydd arnynt. Os ydych am wneud hynny, dewiswch y rhaniadau hynny hefyd.\n"
-"\n"
-"Sylwch nad oes angen ailfformatio'r holl raniadau sy'n bodoli eisoes. "
-"Rhaid \n"
-"ailfformatio'r rhaniadau sy'n cynnwys y system weithredu [megis \"/\",\"usr"
-"\"\n"
-"neu \"/var\") ond nid oes rhaid i chi ail fformatio rhaniadau sy'n cynnwys\n"
-"data rydych am ei gadw (e.e. \"/home\").\n"
-"\n"
-"Byddwch ofalus wrth ddewis rhaniadau. Ar �l fformatio bydd yr holl ddata ar\n"
-"y rhaniadau'n cael eu dileu ac ni fydd modd ei adfer.\n"
-"\n"
-"Cliciwch \"Iawn\" pan ydych yn barod i fformatio rhaniadau.\n"
-"\n"
-"Cliciwch \"Dileu\" os ydych am ddewis rhaniad arall ar gyfer eich gosodiad\n"
-"Mandrake Linux newydd\n"
-"\n"
-"Cliciwch \"Uwch\" os ydych am ddewis rhaniadau i'w gwirio am flociau\n"
-"gwallus ar y ddisg."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Mae eich system weithredu Mandrake Linux newydd yn cael ei osod.\n"
-"Yn dibynnu ar y nifer o becynnau byddwch yn eu gosod a chyflymder\n"
-"eich cyfrifiadur, bydd yn cymryd rhwng ychydig o amser a sbel go lew.\n"
-"\n"
-"Amynedd..."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Ar yr adeg pan fyddwch yn gosod Mandrake Linux, mae'n debygol y bydd\n"
-"rhai pecynnau wedi eu diweddaru ers y rhyddhad cychwynnol. Bydd rhai \n"
-"gwallau wedi eu cywiro a materion diogelwch wedi eu datrys. I ganiat�u\n"
-"i chi fanteisio ar hyn mae cynnig i chi eu llwytho i lawr o'r rhyngrwyd.\n"
-"Dewiswch \"Iawn\" os oes gennych gyswllt gweithredol �'r rhyngrwyd,\n"
-"neu \"Na\"os ydych am osod pecynnau mwy diweddar rhywbryd eto.\n"
-"\n"
-"Bydd dewis \"Iawn\" yn dangos rhestr o leoedd o le mae modd derbyn\n"
-"diweddariadau. Dewiswch yr un agosaf atoch. Yna, bydd coeden dewis\n"
-"pecynnau yn ymddangos: Wedi i chi benderfynu ar eich dewis, cliciwch\n"
-"\"Gosod\" i estyn a gosod y pecynnau hynny neu \"Diddymu\" i beidio."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Cyn parhau dylech ddarllen amodau'r drwydded yn ofalus. Mae'n ymwneud\n"
-"� holl ddosbarthiad Mandrake Linux, ac os nad ydych yn cytuno �'r holl\n"
-"amodau, cliciwch ar fotwm \"Gwrthod\" fydd yn terfynu'r gosodiad yn syth.\n"
-"I barhau gyda'r gosodiad, cliciwch fotwm \"Derbyn\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Yma mae angen dewis lefel diogelwch ar gyfer y peiriant. Fel rheol,\n"
-"y mwyaf agored yw'r peiriant, y mwyaf pwysig yw'r data yr uchaf\n"
-"ddylai'r lefel diogelwch fod. Er hynny, mae diogelwch yn dod ar draul\n"
-"hwylustod. Gw. pennod MSEC yn y \"Reference Manual\" am\n"
-"wybodaeth ar ystyr y lefelau hyn\n"
-"\n"
-"Os nad ydych yn siwr beth i'w ddewis, dewiswch y rhagosodedig."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Yn awr mae angen i chi ddewis pa raniadau i'w defnyddio ar gyfer gosodiad\n"
-"eich system Mandrake Linux. Os oes rhaniadau wedi eu diffinio eisoes, un\n"
-"ai drwy osodiad blaenorol o GNU/Linux neu gan offeryn rhannu arall, mae\n"
-"modd i chi ddefnyddio'r rhaniadau presennol. Os nad, rhaid i' rhaniadau'r\n"
-"ddisg caled gael eu diffinio.\n"
-"\n"
-"I greu rhaniadau, rhaid yn gyntaf ddewis disg caled. Mae modd dewis disg\n"
-"i'w rannu drwy glicio ar \"hda\" ar gyfer y ddisg IDE cyntaf., \"hdb\" ar\n"
-"gyfer yr ail, \"sda\" ar gyfer y ddisg SCSI cyntaf, ac yn y blaen.\n"
-"\n"
-"I greu'r rhaniad, mae modd defnyddio'r dewisiadau hyn:\n"
-"\n"
-" *\"Clirio'r cyfan\": mae'r dewis hwn yn dileu pob rhaniad ar ddisg.\n"
-"\n"
-" *\"Awto ddynodi\": mae'r dewis hwn yn caniat�u i chi greu'n awtomatig\n"
-"Ext2 a rhaniadau cyfnewid mewn lle gwag ar eich disg.\n"
-"\n"
-" *\"Rhagor\": yn rhoi mynediad i ragor o nodweddion:\n"
-"\n"
-"   *\"Cadw'r tabl rhaniad\": mae hwn yn cadw'r tabl rhaniad i ddisg\n"
-"meddal. Mae hyn yn ddefnyddiol ar gyfer adfer tabl rhaniad, os fydd angen\n"
-"\n"
-"   \"Adfer y tabl rhaniad\": mae hyn yn caniat�u adfer tabl rhaniad "
-"blaenorol\n"
-"o ddisg meddal.\n"
-"\n"
-"   \"Achub y tabl rhaniad\": os yw eich tabl rhaniad wedi ei ddifrodi, mae "
-"modd\n"
-"ceisio ei  adfer drwy'r dewis yma. Byddwch ofalus a chofiwch fod modd iddo\n"
-"fethu.\n"
-"\n"
-"   \"Ai-lwytho'r tabl rhaniad\": mae hwn yn dileu pob newid ac yn ail "
-"lwytho'r\n"
-"tabl rhaniad gwreiddiol.\n"
-"\n"
-"   *\"awto osod cyfrwng symudol\": dad-diciwch y dewis hwn i osod a dad "
-"osod\n"
-"gyda llaw, cyfryngau symudol megis disgiau meddal ac CD-ROMau\n"
-"\n"
-"   *\"Dewin\": defnyddiwch y dewis hwn os ydych am ddefnyddio'r dewin i "
-"rannu\n"
-"eich disg caled. Dyma'sydd orau os nad oes gennych wybodaeth sylweddol ar\n"
-"rhannu\n"
-"\n"
-"   *\"Dadwneud\": defnyddiwch y dewis hwn i ddileu eich newidiadau\n"
-"\n"
-"    *\"Newid o'r modd arferol/arbenigwr\": mae hwn yn caniat�u "
-"gweithredoedd\n"
-"pellach ar raniadau. (Math, dewisiadau, fformat) ac mae'n cynnig mwy o\n"
-" wybodaeth.\n"
-"\n"
-"   *\"Gorffen\":pan fyddwch wedi gorffen rhannu eich disg, bydd hwn yn cadw\n"
-" eich newidiadau yn �l i'r ddisg\n"
-"\n"
-"Sylwer: mae modd cyrraedd y dewisiadau drwy'r bysellfwrdd. Symudwch drwy'r\n"
-" rhaniadau gan ddefnyddio [Tab] a'r saethau [I Fyny/I Lawr].\n"
-"\n"
-"Pan fydd rhaniad wedi ei ddewis, medrwch ddefnyddio:\n"
-"\n"
-" *Ctrl-c i greu rhaniad newydd (pan fo rhaniad gwag yn cael ei ddewis);\n"
-"\n"
-" *Ctrl-d i ddileu rhaniad;\n"
-"\n"
-" *Ctrl-m i greu pwynt gosod;\n"
-"\n"
-"I dderbyn gwybodaeth am yr amrywiol systemau ffeil sydd ar gael, darllenwch "
-"y\n"
-" pennawd ar ext2fs yn y ``Reference Manual''.\n"
-"\n"
-"Os ydych yn gosod ar beiriant PPC, bydd angen i chi greu \"ymlwythwr\" HFS\n"
-" bychan o leiaf 1MB o faint, fydd yn cael ei ddefnyddio gan ymlwythwr "
-"yaboot.\n"
-"Os ydych yn dewis gwneud y rhaniad rhywfaint yn fwy, dyweder tua 50MB, yna\n"
-"gall fod yn le defnyddiol i gadw cnewyllyn sb�r a delweddau ramdisk ar "
-"gyfer\n"
-" sefyllfaoedd cychwyn argyfyngus!"
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mae mwy nag un rhaniad Microsoft wedi ei ganfod ar eich disg caled.\n"
-"Dewiswch ba un rydych am newid ei faint er mwyn gosod eich\n"
-"system weithredu Mandrake Linux newydd\n"
-"\n"
-"Mae pob rhaniad wedi ei restri fel hyn: \"Enw Linux\", \"Enw Microsoft\",\n"
-"\"Maint\".\n"
-"\n"
-"Mae \"Enw Linux\" wedi ei strwythuro fel hyn: \"math o ddisg caled\", \n"
-"\"rhif y disg caled\", \"rhif y rhaniad\" (e.e., \"hda1\").\n"
-"\n"
-"\"hd\" yw'r \"Math o ddisg caled\" os mai disg caled IDE sydd gennych\n"
-"a \"sd\" yw disg caled SCSI.\n"
-"\n"
-"Llythyren wedi'r \"hd\" neu \"sd\" yw'r \"Rhif disg caled\" bob tro.\n"
-"Gyda disgiau caled IDE:\n"
-"\n"
-" * mae \"a\" yn golygu \"prif ddisg caled ar y rheolydd IDE cyntaf\",\n"
-"\n"
-" * mae \"b\" yn golygu \"ddisg caled gwas ar y rheolydd IDE cyntaf\",\n"
-"\n"
-" * mae \"c\" yn golygu \"prif ddisg caled ar yr ail reolydd IDE\",\n"
-"\n"
-" * mae \"d\" yn golygu \"ddisg caled gwas ar yr ail reolydd IDE\",\n"
-"\n"
-"Gyda disgiau caled SCSI mae \"a\" yn golygu'r \"enw SCSI isaf\", ac mae\n"
-" \"b\" yn golygu'r \"ail enw SCSI isaf\", ag ati.\n"
-"\n"
-"Mae \"Enw Windows\" yn cyfeirio at y llythyren y disg caled o dan\n"
-" Windows (\"C:\" yw'r ddisg  neu raniad cyntaf)."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Amynedd... Gall y weithred hon gymryd rhai munudau."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Mae DrakX am wybod a ydych am wneud gosodiad rhagosodedig.\n"
-"Hwn sy'n cael ei (\"Argymell\") neu a ydych eisiau mwy o reolaeth\n"
-" (\"Arbenigwr\"). Mae gennych hefyd y dewis o wneud gosodiad newydd neu\n"
-" uwchraddio system Mandrake Linux cyfredol.\n"
-"\n"
-" *\"Gosod\" Mae hwn yn dileu'r hen system yn llwyr. Mewn gwirionedd, yn\n"
-"dibynnu ar ffurf eich peiriant, bydd modd cadw rhai hen raniadau (Linux neu\n"
-"eraill) heb eu newid.\n"
-"\n"
-" *\"Uwchraddio\" Mae'r gosodiad yn caniat�u i chi uwchraddio'r pecynnau\n"
-"sydd wedi eu gosod ar eich system Mandrake Linux. Bydd yn cadw'r rhaniadau\n"
-"cyfredol ar eich disg caled yn ogystal � ffurfweddiad defnyddwyr. Mae pob\n"
-"cam ffurfweddiad arall ar gael fel mewn gosodiad arferol.\n"
-"\n"
-" *\"Uwchraddio Pecynnau'n Unig\" Mae hwn yn ddewis newydd i ganiat�u\n"
-"uwchraddio system Mandrake Linux cyfredol tra'n cadw'r holl ffurfweddiad\n"
-"system heb ei newid. Mae ychwanegu pecynnau newydd i'r system hefyd \n"
-"yn bosibl.\n"
-"\n"
-"Dylai'r uwchraddiad weithio gyda systemau Mandrake Linux yn cychwyn\n"
-"o rifyn \"8.1\" \n"
-"\n"
-"Gan ddibynnu ar eich gwybodaeth am GNH/Linux, dewiswch un o'r canlynol:\n"
-"\n"
-" *Argymhellir: dewiswch hwn os nad ydych wedi gosod system weithredu\n"
-"GNU/Linux o'r blaen. Bydd y gosod yn hawdd a bydd ond rhaid i chi ateb\n"
-"rhai cwestiynau\n"
-"\n"
-" *Arbenigwr: os oes gennych wybodaeth drylwyr am GNU/Linux, mae modd\n"
-"i chi ddewis y math yma o osodiad. Bydd hwn yn caniat�u i chi osod y system\n"
-"yn �l eich gofynion eich hun. Bydd ateb rhai o'r cwestiynau'n anodd os nad\n"
-"oes gennych wybodaeth drylwyr o GNU/Linux, felly peidiwch � dewis hwn os\n"
-" nad ydych yn gwybod beth rydych yn ei wneud."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Fel arfer mae DrakX yn dewis y bysellfwrdd cywir ar eich cyfer ( gan "
-"ddibynnu pa\n"
-" iaith rydych wedi ei ddewis) ac ni fyddwch yn gweld y cam hwn. Er hynny,\n"
-"efallai nad oes gennych fysellfwrdd sy'n cyfateb yn union i'ch iaith: e.e., "
-"os ydych\n"
-"yn Americanwr sy'n siarad Cymraeg, efallai eich bod am gadw eich "
-"bysellfwrdd\n"
-"Americanaidd. Neu os ydych yn siarad Cymraeg ac yn byw yn Hong Kong mae'r\n"
-" un sefyllfa'n codi. Yn y ddwy achos bydd angen i chi fynd yn �l i'r cam yma "
-"yn y\n"
-" gosodiad a dewis y bysellfwrdd perthnasol o'r rhestr.\n"
-"\n"
-"Cliciwch ar fotwm \"Rhagor\" i dderbyn y rhestr lawn o fysellfyrddau sy'n "
-"cael eu\n"
-" cynnal.\n"
-" "
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Dewiswch eich dewis iaith ar gyfer y gosod a'r defnydd o'r system\n"
-"\n"
-"Bydd clicio ar y botwm \"Uwch\" yn caniat�u i chi ddewis ieithoedd eraill "
-"i'w\n"
-" gosod ar eich peiriant gwaith. Bydd dewis ieithoedd eraill yn gosod "
-"ffeiliau\n"
-" penodol sy'n cynnwys dogfennaeth a rhaglenni yn yr ieithoedd hynny.\n"
-"Er enghraifft, os ydych yn westeiwr ar gyfer defnyddwyr o Sbaen, dewiswch \n"
-" Gymraeg fel y brif iaith yn golwg coeden ac yn yr adran Uwch cliciwch ar "
-"y \n"
-"seren lwyd sy'n cyfateb i \"Spaeneg|Sbaen\". \n"
-"\n"
-"Sylwer bod modd gosod myw nag un iaith. Unwaith i chi ddewis unrhyw \n"
-"leoleiddiad ychwanegol cliciwch y botwm \"Iawn\" i barhau."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Drwy ragosodiad mae DrakX yn cymryd bod gennych lygoden dau fotwm a bydd yn "
-"ei osod i efelychu botwm tri. Bydd DrakX yn gwybod yn awtomatig p'un a'i "
-"yw'n lygoden PS/2, cyfresol neu USB.\n"
-"\n"
-" Os hoffech chi bennu math arall o lygoden, dewiswch y math priodol o'r "
-"rhestr.\n"
-"\n"
-"Os byddwch yn dewis llygoden ar wah�n i'r rhagosodedig, byddwch yn gweld "
-"ffenestr profi'r llygoden. Defnyddiwch y botymau a'r olwyn i wneud yn siwr "
-"fod y gosodiadau'n gweithio. Os nad yw'r llygoden yn gweithio'n iawn pwyswch "
-"ar y bylchwr neu [Return] i \"Dileu\" a dewis eto."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Dewiswch y porth cywir. Mae porth \"COM1\" o dan MS Windows yn cael ei alw "
-"yn\n"
-"\"ttyS0\" yn GNU/Linux, e.e."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Mae hwn yn fan pwysig ynghylch diogelwch eich system GNU/Linux; rhaid\n"
-"rhoi cyfrinair \"root\".\"root\" yw gweinyddwr y system a'r unig un sydd �'r "
-"hawl\n"
-"i wneud diweddariadau, ychwanegu defnyddwyr, newid ffurfweddiad cyffredinol\n"
-"y system, ac yn y blaen. Yn fyr mae \"root\" yn medru gwneud popeth! Dyna\n"
-"pam mae'n rhaid dewis cyfrinair sy'n anodd ei ddyfalu - bydd DrakX yn dweud\n"
-" wrthych os yw'n rhy hawdd. Fel y gwelwch, mae modd peidio gorfod cynnig\n"
-" cyfrinair, ond rydym yn argymell yn erbyn hyn, hyd yn oed am un rheswm:\n"
-" peidiwch � meddwl bod eich systemau gweithredu eraill yn ddiogel rhag\n"
-" camgymeriadau, gan eich bod wedi cychwyn o GNU/Linux. Gan fod \"root\" yn\n"
-" medru goresgyn unrhyw gyfyngiadau a dileu data'n anfwriadol ar bob "
-"rhaniad,\n"
-" drwy fynd at y rhaniadau'n ddi-hid, yna mae'n bwysig ei gwneud hi'n anodd "
-"bod\n"
-" yn \"root\".n\n"
-"Dylai'r cyfrinair fod yn gyfuniad o rifau a llythrennau ac o leiaf 8 nod o "
-"hyd.\n"
-" Peidiwch ysgrifennu'r cyfrinair ar bapur - bydd yn ei gwneud hi'n rhy "
-"hawdd\n"
-" gwanhau'r system.\n"
-"\n"
-"Er hynny, peidiwch � gwneud y cyfrinair yn rhy hir neu gymhleth am fod rhaid "
-"i\n"
-"chi fedri ei gofio heb ormod o drafferth.\n"
-"\n"
-"Ni fydd y cyfrinair yn cael ei ddangos ar y sgrin wrth i chi ei deipio. "
-"Felly bydd\n"
-" rhaid i chi deipio'r cyfrinair ddwywaith i leihau'r siawns o deipio gwall. "
-"Os ydych\n"
-"yn digwydd gwneud yr un gwall teipio ddwywaith, bydd rhaid defnyddio'r "
-"cyfrinair\n"
-" \"anghywir\" i gychwyn y tro cyntaf.\n"
-"\n"
-"Yn y modd arbenigwr, bydd  gofyn os fyddwch yn cysylltu � gwasanaethwr\n"
-"dilysu, megis NIS neu LDAPl\n"
-"\n"
-"Os yw eich rhwydwaith yn defnyddio protocol LDAP (neu NIS) ar gyfer dilysu,\n"
-" dewiswch \"LDAP\" (neu \"NIS\") fel dilyswr. Os nad ydych yn gwybod,\n"
-" gofynnwch i'ch gweinyddwr system.\n"
-"\n"
-"Os nad yw eich cyfrifiadur wedi ei gysylltu i unrhyw rwydwaith wedi ei "
-"weinyddu,\n"
-" byddwch angen dewis \"Ffeiliau lleol\" ar gyfer dilysu."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"Mae LILO a grub yn llwythwyr cychwyn ar gyfer GNU/Linux. Fel rheol\n"
-"mae'r cam yma'n gwbl awtomatig. Mewn gwirionedd mae DrakX yn\n"
-"dadansoddi'r adran gychwyn ac yn gweithredu ar yr hyn mae'n ei ganfod\n"
-"yma:\n"
-" *os yw'n canfod adran gychwyn Windows mae'n gosod adran cychwyn\n"
-"grub/LILO yno yn ei le. Felly bydd modd i chi gychwyn un ai GNU/Linux\n"
-"neu system weithredu arall.\n"
-"\n"
-" *os fydd yn canfod adran gychwyn grub neu LILO, bydd yn gosod un mwy\n"
-"diweddar yn ei le.\n"
-"\n"
-"Os oes amheuaeth, bydd DrakX yn dangos blwch deialog gyda dewisiadau.\n"
-"\n"
-" * \"Llwythwr cychwyn i'w ddefnyddio\": mae gennych dri dewis:\n"
-"\n"
-"    * \"GRUB\":os mae'n well gennych grub (dewislen testun)\n"
-"\n"
-"    * \"LILO\" gyda dewislen raffigol\": os mae'n well gennych LILO gyda'i\n"
-"rhagwyneb graffigol.\n"
-"\n"
-"    * \"LILO\" gyda dewislen raffigol\": os mae'n well gennych rhagwyneb "
-"dewislen\n"
-"testun.\n"
-"\n"
-" * \"Dyfais cychwyn\": yn y rhan fwyaf o achosion ni fyddwch yn newid\n"
-"y rhagosodedig (\"/dev/hda\"), ond os mae'n well gennych, gall y llwythwr\n"
-"cychwyn gael ei osod ar yr ail ddisg caled (\"/dev/hdb\"), neu hyd yn oed "
-"ar\n"
-"ddisg meddal (\"/dev/fd0\")\n"
-" * \"Oedi cyn cychwyn y ddelwedd rhagosodedig\": wrth ail gychwyn y "
-"cyfrifiadur\n"
-"dyma'r oedi sy'n caniat�u i'r defnyddiwr ddewis o fewn y ddewislen llwythwr "
-"cychwyn,\n"
-"llwythwr cychwyn arall yn lle'r un rhagosodedig.\n"
-"\n"
-"!!Gofalwch, os nad ydych yn gosod llwythwr cychwyn, (drwy ddewis \"Diddymu\" "
-"yma),\n"
-"rhaid i chi wneud yn siwr fod gennych fodd i gychwyn eich system Linux "
-"Mandrake.\n"
-"Hefyd, gwnewch yn siwr eich bod yn gwybod beth rydych yn ei wneud cyn newid "
-"y\n"
-"dewisiadau hyn!!\n"
-"\n"
-"Bydd clicio'r botwm \"Uwch\" yn y ddeialog yn cynnig nifer o ddewisiadau "
-"uwch,\n"
-"sydd yn cael eu cadw ar gyfer y defnyddiwr arbenigol.\n"
-"\n"
-"Wedi i chi ffurfweddi baramedrau'r llwythwr cychwyn cyffredinol, bydd rhestr "
-"o\n"
-"ddewisiadau cychwyn sydd ar gael wrth gychwyn, yn cael ei gynnig i chi.\n"
-"\n"
-"Os oes yna system weithredu arall ar eich peiriant, bydd yn cael ei "
-"ychwanegu'n\n"
-"awtomatig i'r ddewislen gychwyn. Yma cewch wneud m�n newidiadau i'r "
-"dewisiadau\n"
-"presennol. Dewiswch enw a chliciwch \"Newid\" i'w newid neu ei dynnu;\n"
-"\"Ychwanegu\" i greu enw newydd; a \"Gorffen\" i fynd ymlaen i'r cam nesaf "
-"o'r gosod."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"Mae LILO (the LInux LOader) a grub yn llwythwyr cychwyn: maent yn medru\n"
-"cychwyn un ai GNU/Linux neu unrhyw system weithredu arall sy'n bresennol\n"
-"ar eich cyfrifiadur. Fel rheol mae'r systemau hyn wedi eu canfod a'u gosod "
-"yn\n"
-"gywir. Os nad yw hyn yn gywir y tro yma, mae modd i chi ychwanegu cofnod\n"
-" gyda llaw ar y sgrin hwn. Byddwch ofalus i ddewis y paramedrau cywir\n"
-"\n"
-"Efallai na fyddwch eisiau rhoi mynediad i'r systemau gweithredu hyn i neb "
-"arall\n"
-"Os felly, gallwch ddileu'r cofnodion perthnasol.Ond bydd rhaid i chi greu "
-"disg\n"
-" cychwyn ar gyfer y systemau gweithredu rheini!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Rhaid i chi ddangos lle rydych am osod y wybodaeth angenrheidiol i gychwyn\n"
-"GNU/Linux\n"
-"Os nad ydych yn gwybod yn union beth rydych yn ei wneud, dewiswch \"First\n"
-"sector of drive (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Yma byddwn yn dewis system argraffu i'ch cyfrifiadur ei ddefnyddio. Efallai\n"
-"bod systemau eraill yn cynnig un i chi, ond mae Mandrake yn cynnig tri.\n"
-"\n"
-" *pdq\" - sy'n golygu \"print, don't queue\", Hwn yw'r dewis os oes gennych "
-"gysylltiad uniongyrchol �'ch argraffydd a'ch bod eisiau medru tynnu allan o "
-"waith argraffu pan mae'r papur wedi mynd yn sownd ac nad oes gennych "
-"argraffyddion wedi eu cysylltu drwy rwydwaith. Mae'n medru trin "
-"rhwydweithiau syml ac mae rhywfaint yn araf ar gyfer rhwydweithiau. Dewiswch "
-"\"pdq\" os mai dyma yw eich tro cyntaf yn GNU/Linux., mae modd i chi newid "
-"eich dewis ar �l gosod drwy ddefnyddio PrinterDrake o Ganolfan Rheoli "
-"Mandrake a chlicio botwm arbenigwr\n"
-" *\"CUPS\" - \"Common Unix Printing System\". Mae hwn yn wych ar gyfer "
-"argraffu i argraffyddion lleol a hanner ffordd rownd y byd. Mae'n symlach, "
-"yn medru gweithredu fel gwasanaethwr neu cleient ar gyfer yr hen system \"lpd"
-"\",felly mae'n cydweddi �'r systemau sydd wedi mynd o'i flaen. Mae'n gallu "
-"gwneud nifer o driciau, ond mae bron mor syml i'w osod  \"pdq\". Os ydych "
-"amgen hwn i efelychu gwasanaethwr \"lpd\", yna rhaid cychwyn daemon \"cups-"
-"lpd\". Mae ganddo wyneb graffigol ar gyfer argraffu neu ddewis dewisiadau "
-"argraffu.\n"
-"\n"
-" *\"lprNG\" - \"line printer daemon New Generation\" Mae'r system yma'n "
-"medru gwneud yn fras yr un pethau a'r lleill, ond mae'n medru argraffu i "
-"argraffyddion ar Novell Network, gan ei fod yn cynnal protocol IPX, ac mae'n "
-"medru argraffu 'n uniongyrchol i orchmynion cragen.. Os oes angen Novell neu "
-"argraffu i orchmynion heb luniad peipen ar wah�n, defnyddiwch lprNG. Yn "
-"gyffredinol, mae CUPS yn well am ei fod yn syml ac yn well wrth weithio ar "
-"draws rhwydwaith."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"Mae DrakX yn canfod unrhyw ddyfais IDE sydd ar eich cyfrifiadur. Bydd yn\n"
-"chwilio am un neu fwy o gardiau SCSI PCI ar eich system. Os oes Cerdyn "
-"SCSI'n cael ei ganfod bydd DrakX yn awtomatig yn gosod y gyrrwr priodol.\n"
-"\n"
-"Oherwydd nad yw canfod caledwedd bob tro'n canfod darn o galedwedd, bydd\n"
-" DrakX yn gofyn i chi gadarnhau os oes cerdyn SCSI PCI yn bresennol. "
-"Cliciwch\n"
-"\"Oes\" os ydych yn gwybod bod cerdyn SCSI wedi ei osod ar eich peiriant. \n"
-"Bydd rhestr o gardiau SCSI'n ymddangos i chi ddewis un. Cliciwch \"Na\" os\n"
-"nad oes gennych galedwedd SCSI. Os nad ydych yn siwr, gallwch edrych ar y\n"
-" rhestr o galedwedd sydd wedi ei ganfod ar eich peiriant drwy ddewis\n"
-" \"Gwybodaeth am galedwedd\" a chlicio \"Iawn\". Edrychwch yn fanwl ar y\n"
-"rhestr a chlicio'r botwm \"Iawn\" i fynd yn �l i'r cwestiwn rhag wyneb "
-"SCSI.\n"
-"\n"
-"Os ydych wedi pennu eich addaswr gyda llaw, bydd DrakX yn gofyn i chi s\n"
-" ydych am bennu dewisiadau ar ei gyfer. Dylech adael i DrakX ofyn i'r cerdyn "
-"am\n"
-" ddewisiadau penodol i'r cerdyn mae angen i'r caledwedd eu cychwyn. Mae hyn\n"
-"fel rheol yn gweithio'n dda\n"
-"\n"
-"Os nad yw DrakX yn medru holi am y dewisiadau sydd eu hangen, bydd rhaid i\n"
-" chi ddarparu'r dewisiadau gyda llaw. Darllenwch yr ``User "
-"Guide'' (pennod3,\n"
-" adran \"Collecting Information on Your Hardware\") am syniadau ar sut i "
-"gael y\n"
-" paramedrau angenrheidiol o ddogfennau'r caledwedd, o safle gwe'r "
-"gwneuthurwr\n"
-" (os oes gennych gysylltiad �'r Rhyngrwyd) neu oddi wrth Microsoft Windows "
-"(os\n"
-" ydych wedi defnyddio'r caledwedd gyda Windows ar eich system)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Mae modd i chi gynnig cofnodion eraill ar gyfer yaboot, un ai systemau\n"
-" gweithredol eraill, cnewyll eraill, neu ddelwedd cychwyn argyfwng.\n"
-"\n"
-"Ar gyfer systemau gweithredu eraill, mae'r cofnod yn cynnwys label a'r "
-"rhaniad\n"
-" root yn unig\n"
-"\n"
-"Ar gyfer LInux, mae yna rhai dewisiadau:\n"
-"\n"
-" *Label:sef yr enw fyddwch yn ei deipio yn anogwr yaboot i ddewis y dewis\n"
-" cychwyn.\n"
-"\n"
-" *Image: hwn fydd enw'r cnewyllyn i'w gychwyn. Fel rheol, vimlinux neu\n"
-"amrywiad ohono gydag estyniad\n"
-"\n"
-" *Root: y ddyfais \"root\" neu \"/\" ar gyfer eich gosodiad Linux.\n"
-"\n"
-" *Append: ar galedwedd Apple, mae dewis atodi cnewyllyn yn cael ei\n"
-" ddefnyddio'n eithaf aml i gynorthwyo cychwyn caledwedd fideo neu i alluogi\n"
-" efelychiad o'r llygoden bysellfwrdd sydd ar goll ar yr ail a'r trydydd "
-"botwm\n"
-"llygoden llygod arferol Apple. Dyma rhai enghreifftiau:\n"
-"\n"
-"       video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: mae modd defnyddio'r dewis hwn i un ai lwytho'r modiwlau "
-"cychwynnol,\n"
-" cydnabod y ddyfais cychwyn ar gael, neu i lwytho delwedd ramdisg ar gyfer\n"
-" cychwyn argyfwng.\n"
-"\n"
-" * Initrd-size: maint y ddelwedd ramdisg arferol yw 4,096bid. Os ydych "
-"angen\n"
-"dyrannu ramdisg mawr, mae modd defnyddio'r dewis hwn.\n"
-"\n"
-" * Read-write:fel rheol mae'r rhaniad \"root\" yn cael ei agor fel darllern "
-"yn unig, i\n"
-" ganiat�u gwiriad system ffeiliau cyn i'r system ddod yn \"fyw\". Yma mae "
-"modd\n"
-" diystyru'r dewis hwn.\n"
-"\n"
-" * NoVideo: petai caledwedd Apple yn profi i fod yn peri anhawsterau "
-"sylweddol,\n"
-" mae modd i chi ddewis cychwyn mewn modd \"novideo\", gyda chynhaliaeth\n"
-" ffr�m byffer cynhenid\n"
-"\n"
-" * Default: dyma'r cyflwr rhagosodedig, dewiswch hwn drwy bwyso ENTER at\n"
-" anogwr yaboot. Bydd y cofnod hefyd wedi ei amlygu gyda \"*\", os wnewch "
-"chi\n"
-" bwyso ar [Tab] i weld dewisiadau'r cychwyn."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot yw llwythwr cychwyn ar gyfer caledwedd NewWorld MacIntosh. Mae'n \n"
-"medru cychwyn GNU/Linux, MacOS neu MacOSX os ydynt ar eich peiriant. Fel\n"
-" rheol, mae'r systemau gweithredu hyn yn cael eu canfod yn gywir a'u gosod. "
-"Os\n"
-" nad yw hyn yn digwydd, mae modd i chi ychwanegu eu cofnod gyda llaw ar y\n"
-" sgrin hwn. Byddwch ofalus i ddewis y paramedrau cywir.\n"
-"\n"
-"Prif ddewisiadau Yaboot yw:\n"
-"\n"
-" * Cychwyn Neges: neges testun sym lsy'n cael ei ddangos cyn yr anogwr\n"
-" cychwyn\n"
-"\n"
-" * Cychwyn y Ddyfais: yn dangos lle rydych am osod y wybodaeth "
-"angenrheidiol\n"
-"i gychwyn GNU/Linux. Yn gyffredinol, byddwch wedi creu rhaniad ymlwythwr yn\n"
-" gynt, i ddal y wybodaeth.\n"
-"\n"
-" * Oediad Open Firmware: yn wahanol i LILO, mae yna ddau oediad ar gael "
-"gyda\n"
-" yaboot. Mae'r cyntaf yn cael ei fesur mewn eiliadau a dyma pryd hyn mae "
-"modd\n"
-" dewis rhwng CD, cychwyn OF, MacOS neu Linux\n"
-"\n"
-" * Oediad Cychwyn y Cnewyllyn: mae'r oediad yn debyg i oediad cychwyn LILO.\n"
-"WEdi dewis Linux, bydd oediad o 0.1 eiliad cyn bod eich cnewyllyn "
-"rhagosodedig\n"
-" yn cael ei ddewis.\n"
-"\n"
-" * Galluogi Cychwyn o'r CD?: mae dewis hwn yn caniat�u i chi ddewis \"C\" "
-"am\n"
-"CD ar anogwr y cychwyn cyntaf.\n"
-"\n"
-" * Galluogi Cychwyn OF?: mae dewis hwn yn caniat�u i chi ddewis |\"N\" am\n"
-" Open Firmware ar anogwr y cychwyn cyntaf.\n"
-"\n"
-" * System Weithredu Rhagosodedig: mae modd dewis pa system weithredu fydd\n"
-"yn cychwyn drwy ragosodiad pan ddaw'r Open Firmware i ben."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Dyma amrywiol baramedrau ynghylch eich peiriant. Yn ddibynnol ar eich\n"
-"caledwedd, mae'n bosibl i chi weld y rhain, neu beidio\n"
-"\n"
-" *\"Llygoden\": edrychwch ar ffurfweddiad presennol y llygoden a chliciwch "
-"ar y\n"
-" botwm i'w newid os oes angen.\n"
-"\n"
-" *\"Bysellfwrdd\" edrychwch ar ffurfweddiad presennol y bysellfwrdd a "
-"chliciwch\n"
-"ar y\n"
-" botwm i'w newid os oes angen.\n"
-"\n"
-" *\"Cylchfa amser\" Mae DrakX, yn dyfalu eich cylchfa amser o'r iaith "
-"rydych\n"
-" wedi ei dewis. Eto fel gyda bysellfwrdd efallai nad ydych yn y wlad sy'n "
-"cyfateb i'r\n"
-" dewis iaith. Felly, mae'n bosibl y bydd angen i chi glicio ar fotwm "
-"\"Cylchfa\n"
-" amser\" i ffurfweddi'r cloc yn �l y gylchfa amser rydych ynddi.\n"
-"\n"
-" *\"Argraffydd\": bydd clicio ar y botwm \"Dim argraffydd\" yn agor y dewin\n"
-" ffurfweddi.\n"
-"\n"
-" *\"Cerdyn sain\": os oes cerdyn sain yn cael ei ganfod ar eich system, bydd "
-"yn\n"
-"cael ei ddangos yma. Nid oes modd creu newidiadau adeg y gosodiad.\n"
-"\n"
-" *\"Cerdyn teledu\": os oes cerdyn teledu yn cael ei ganfod ar eich system, "
-"bydd\n"
-" yn cael ei ddangos yma. Nid oes modd creu newidiadau adeg y gosodiad.\n"
-"\n"
-" *\"Cerdyn IDSN\":os oes cerdyn IDSN yn cael ei ganfod ar eich system, bydd\n"
-" yn cael ei ddangos yma. Mae modd clicio ar y botwm i newid y paramedrau\n"
-" cysylltiedig."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Dewiswch y ddisg galed rydych am ei ddileu er mwy n gosod eich rhaniad\n"
-"Mandrake Linux newydd. Byddwch ofalus, bydd yr holl ddata sydd arno'n\n"
-"cael ei ddileu ac ni fydd modd ei adfer!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Cliciwch \"Iawn\" os ydych am ddileu'r holl ddata a rhaniadau sy'n bresennol "
-"ar y disg galed hwn. Byddwch ofalus, wedi i chi glicio \"Iawn\" ni fydd modd "
-"i chi adfer unrhyw ddata na rhaniadau presennol ar y disg caled, gan gynnwys "
-"data Windows.\n"
-"\n"
-"Cliciwch \" Diddymu\" i ddiddymu'r weithred hon heb golli unrhyw ddata a "
-"rhaniadau sy'n bresennol ar y ddisg galed."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Methu cael mynediad i fodiwlau'r cnewyllyn sy'n cyfateb i'ch cnewyllyn chi "
-"(mae ffeil %s ar goll), mae hyn yn golygu, fel arfer, nad yw eich disg "
-"cychwyn yn cydweddu gyda'r cyfrwng Gosod (cr�wch ddisg cychwyn meddal newydd)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Rhaid fformatio %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Rydych wedi dewis y gwasanaethwr(wyr) canlynol: %s\n"
-"\n"
-"\n"
-"Mae'r gwasanaethwyr canlynol yn cael eu cychwyn drwy ragosodiad. Nid oes "
-"ganddynt unrhyw faterion diogelwch hysbys, ond mae'n bosibl i rai ddod i'r "
-"golwg. Os felly rhaid uwchraddio gynted ag y bo modd\n"
-"\n"
-"Ydych chi wir eisiau gosod y gwasanaethwyr hyn?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Methu defnyddio darlledu heb parth NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Rhowch ddisg meddal wedi ei fformatio i FAT yng ngyrrwr %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Nid yw 'r disg meddal hwn wedi ei fformatio i FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"I ddefnyddio'r dewis o becynnau wedi eu cadw, cychwynnwch y gosodiad gyda "
-"``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Gwall wrth ddarllen ffeil %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Mae peth caledwedd ar eich cyfrifiadur angen gyrwyr \"priodol\" i weithio.\n"
-"Mae rhywfaint o wybodaeth i'w gael amdanynt yn %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Rhaid bod gennych raniad gwraidd.\n"
-"Cr�wch raniad (neu glicio ar un presennol)\n"
-"Yna dewiswch weithred \"Pwynt Gosod\" a'i osod i `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Rhaid cael rhaniad cyfnewid"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nid oes gennych raniad cyfnewid\n"
-"\n"
-"Parhau beth bynnag?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Rhaid bod gennych raniad FAT wedi ei osod yn /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Defnyddiwch le gwag"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nid oes digon o le i ddynodi rhaniadau newydd"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Defnyddiwch y rhaniadau cyfredol"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nid oes rhaniad cyfredol i'w ddefnyddio"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Defnyddiwch rhaniad Windows ar gyfer cylch-ol"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Pa raniad hoffech chi ei ddefnyddio ar gyfer Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Dewiswch y maint"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Maint rhaniad gwraidd mewn MB :"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Maint rhaniad cyfnewid mewn MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Defnyddiwch y lle gwag ar raniad Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Pa raniad ydych chi am newid ei faint?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Mesur ffiniau system ffeilio Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Nid yw'r newidiwr maint FAT yn medru trin eich rhaniad.\n"
-"digwyddodd y gwall canlynol: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Mae eich rhaniad Windows yn rhy ysgyriog, rhedwch \"defrag\" yn gyntaf"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"RHYBUDD!\n"
-"\n"
-"Bydd DrakX yn newid maint eich rhaniad Windows. Byddwch\n"
-"ofalus: mae gwneud hyn yn beryglus. Os nad ydych wedi\n"
-"gwneud yn barod, dylech fynd allan o'r gosod, rhedeg scandisk\n"
-"yn Windows (ac os oes modd defrag), yna ail gychwyn y gosodiad.\n"
-"Dylech hefyd wneud copi wrth gefn o'ch data.Pan rydych yn siwr, cliciwch "
-"Iawn."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Pa faint ydych am ei gadw ar gyfer Windows ar"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "rhaniad %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Methodd newid maint FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nid oes rhaniadau FAT i newid eu maint neu i'w defnyddio fel cylch-�l (neu "
-"nad oes digon o le ar �l)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Dileu'r ddisg gyfan"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Tynnu Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Mae gennych fwy nag un disg caled, ar ba un ydych am osod linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Bydd pob rhaniad a'u data yn cael ei ddileu ar yrrwr %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Rhannu disg unigol"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Defnyddiwch fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Medrwch rhannu %s\n"
-"Wedi gorffen, peidiwch anghofio cadw gyda 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Does gennych ddim digon o le rhydd ar eich rhaniad Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Methu canfod lle ar gyfer gosod"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Daeth dewin Rhannu DrakX o hyd i'r atebion canlynol:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Methodd rhannu: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Cychwyn y rhwydwaith"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Cau'r rhwydwaith"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Digwyddodd gwall ond wn i ddim sut i ddelio ag ef yn dwt.\n"
-"Mae'n beryglus i barhau."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Pwynt gosod dyblyg %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Methodd rhai pecynnau pwysig a chael eu gosod yn gywir.\n"
-"Un ai mae eich gyrrwr CD-ROM neu eich CD-ROM yn wallus.\n"
-"Gwiriwch y CD-ROM ar gyfrifiadur wedi ei osod gan ddefnyddio \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Croeso i %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Does dim gyrrwr disg meddal ar gael"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Cychwyn cam '%s\"\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Mae eich system yn brin o adnoddau. Efallai y cewch anhawsterau wrth osod\n"
-"Mandrake Linux. Os bydd hynny'n digwydd, gallwch geisio gwneud gosodiad\n"
-"testunol. I wneud hynny, gwasgwch F1 wrth gychwyn ar y CD-ROM ac yna rhoi "
-"'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Gosod Dosbarth"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Dewiswch un o'r dosbarthiadau canlynol o osodiad::"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Cyfanswm maint y grwpiau rydych wedi eu dewis yw tua %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Os hoffech chi osod llai na'r maint hwn\n"
-"dewiswch canran y pecynnau i'w gosod.\n"
-"\n"
-"Dim ond y pecynnau pwysicaf fydd yn cael eu gosod gyda chanran\n"
-"isel; tra bydd canran o 100% yn llwytho'r holl becynnau."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Dim ond ar gyfer %d%% o'r pecynnau hyn mae gennych le.\n"
-"\n"
-"Os hoffech osod llai na hyn,\n"
-"dewiswch canran y pecynnau rydych am eu gosod.\n"
-"Dim ond y pecynnau pwysicaf fydd yn cael eu gosod gyda chanran\n"
-"isel; tra bydd canran o %d%%  yn llwytho'r gymaint o becynnau ag\n"
-"y mae modd."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Dydd modd eu dewis yn fwy penodol yn y cam nesaf."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Cyfanswm y pecynnau i'w gosod"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Dewis  y Grwp Pecyn"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Dewis pecynnau unigol."
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Cyfanswm maint: %d/%d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pecyn gwallus"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Enw: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Fersiwn: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Maint: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Pwysigrwydd: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Nid oes modd i chi ddewis y pecyn hwn - does dim lle ar ol i'w osod"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Mae'r pecynnau canlynol i'w gosod"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Bydd y pecynnau canlynol yn cael eu tynnu"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Does dim modd i chi ddewis/dad-ddewis y pecyn"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Mae hwn yn becyn hanfodol, does dim modd ei ddad-ddewis"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Does dim mod dad-ddewis y pecyn, mae wedi ei osod yn barod"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Rhaid i'r pecyn gael ei uwchraddio\n"
-"Ydych chi'n siwr eich bod am ei ddad-ddewis?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Does dim mod dad-ddewis y pecyn hwn. Rhaid ei ddiweddaru"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Dangoswch y pecynnau dewis awtomatig"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Gosodiad"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "LLwytho/Cadw ar ddisg meddal"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Diweddaru'r dewis pecynnau"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Gosodiad lleiaf"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Dewiswch y pecynnau hoffech chi eu gosod"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Gosod"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Amcangyfrif"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Amser yn weddill"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Arhoswch, paratoi'r gosodiad"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pecyn"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Gosod pecynnau %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Derbyn"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Gwrthod"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Newidiwch eich CD-ROM\n"
-"\n"
-"Rhowch yr CD-ROM sydd wedi ei labeli \"%s\" yn eich gyrrwr a chlicio Iawn\n"
-"Os nad yw gennych, cliciwch Dileu i osgoi gosod o'r CD-ROM hwn."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Mynd yn ein blaen beth bynnag?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Roedd gwall wrth drefnu pecynnau"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Digwyddodd gwall wrth osod pecyn"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-" Rhybudd\n"
-"\n"
-"Darllenwch yr amodau isod yn ofalus. Os ydych yn anghytuno gydag unrhyw\n"
-" ddarn, nid oes caniat�d i chi osod y cyfrwng CD nesaf. Pwyswch 'Gwrthod' i\n"
-" barhau'r gosodiad heb ddefnyddio'r cyfryngau hyn.\n"
-"\n"
-"Nid yw rhai cydrannau ar y CDau canlynol yn cael eu rheoli gan Drwydded GPL\n"
-" neu gytundebau tebyg. Mae'r cydrannau hynny'n cael eu rheoli gan dermau ac\n"
-" amodau ei drwydded benodol ei hun. Darllenwch yn ofalus a chadwch at y\n"
-" trwyddedau penodol cyn defnyddio neu ddosbarthu'r cydrannau hynny.\n"
-"\n"
-"Mae'r trwyddedau hynny'n atal yn gyffredinol, drosglwyddiad, dyblygu (ar "
-"wah�n i\n"
-" bwrpas cadw wrth gefn), dosbarthu, cildroi peirianyddol, dadcydosod,\n"
-" dadgrynhoi neu newid y cydrannau. Bydd unrhyw dorri ar yr amodau hyn yn\n"
-"terfynu eich hawl  o dan y drwydded benodol. Oni bai ei fod yn rhoi'r hawl i "
-"chi,\n"
-"nid oes modd i chi osod y rhaglenni ar fwy nag un system na'i addasu ar "
-"gyfer\n"
-" defnydd ar rwydwaith. Os oes amheuaeth, cysylltwch yn uniongyrchol �\n"
-"dosbarthwr neu olygydd y cydrannau hynny.\n"
-"Mae trosglwyddo i drydydd parti neu gop�o'r cydrannau hynny gan gynnwys y\n"
-" ddogfennaeth, wedi ei wahardd fel rheol\n"
-"\n"
-"Mae pob hawl i gydrannau'r cyfrwng CD nesaf yn perthyn i' hawduron "
-"perthnasol\n"
-" ac maent wedi eu hamddiffyn drwy gyfreithiau eiddo deallusol a hawlfraint "
-"sy'n\n"
-" berthynol i raglenni meddalwedd.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Digwyddodd gwall"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Ydych chi wir eisiau gadael y gosodiad?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Cytundeb trwyddedu"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Cyflwyniad\n"
-"\n"
-"Bydd y system weithredu a'r cydrannau gwahanol sydd o fewn dosbarthiad "
-"Mandrake Linux yn\n"
-"cael eu galw yn \"Gynnyrch Meddalwedd\" o hyn ymlaen. Mae'r Cynnyrch "
-"Meddalwedd yn\n"
-"cynnwys, ond heb eu cyfyngu, i'r  casgliad o raglenni , dulliau, rheolau a "
-"dogfennau mewn\n"
-"perthynas �'r system weithredu a chydrannau gwahanol dosbarthiad Mandrake "
-"Linux.\n"
-"\n"
-"\n"
-"1. Cytundeb Trwyddedu\n"
-"\n"
-"Darllenwch y ddogfen hon yn ofalus. Mae'r ddogfen hon yn gytundeb trwyddedu "
-"rhyngoch\n"
-"chi � MandrakeSoft S.A,. sy'n berthnasol i'r Cynnyrch Meddalwedd.\n"
-"\n"
-"Wrth osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn unrhyw fodd, "
-"rydych yn\n"
-"amlwg yn derbyn ac yn llawn cytuno i gadw at delerau ac amodau'r Drwydded "
-"hon.\n"
-"Os ydych yn anghytuno ag unrhyw rhan o'r cytundeb, ni chewch ganiat�d i "
-"osod, dyblygu\n"
-"neu ddefnyddio'r Cynnyrch Meddalwedd.\n"
-"Bydd unrhyw ymgais i osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn "
-"modd\n"
-"nad yw'n cyd-fynd � thelerau ac amodau'r Drwydded yn ddi-rym a bydd yn "
-"terfynu eich\n"
-"hawliau o dan y Drwydded hon. Ar ddiwedd y Drwydded, rhaid i chi "
-"ddinistrio'n syth pob\n"
-"copi o'r Cynnyrch Meddalwedd.\n"
-"\n"
-"\n"
-"2. Gwarant Gyfyngedig\n"
-"\n"
-"Mae'r Cynnyrch Meddalwedd a'r ddogfennaeth gysylltiedig yn cael eu darparu "
-"\"fel ag y maent\",\n"
-"heb ddim gwarant, hyd y mae'r gyfraith yn caniat�u.\n"
-"Ni fydd MandrakeSoft S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd ag "
-"y bydd y gyfraith yn\n"
-"caniat�u,  am unrhyw iawn o gwbl, arbennig, damweiniol, uniongyrchol neu "
-"anuniongyrchol (gan\n"
-"gynnwys heb gyfyngu ar iawndal am golli busnes, tarfu ar fusnes, colled "
-"ariannol, costau cyfreithiol,\n"
-"a chosb o ganlyniad i achos llys, neu unrhyw golled o ganlyniad) yn codi o'r "
-"defnydd neu'r anallu i\n"
-"ddefnyddio'r Cynnyrch Meddalwedd, hyd yn oed os yw MandrakeSoft wedi eu "
-"cynghori o'r posibilrwydd\n"
-"o'r fath iawn.\n"
-"\n"
-"CYFRIFOLDEB CYFYNGEDIG YN GYSYLLTIEDIG GYDA'R MEDDIANT NEU'R DEFNYDD O "
-"FEDDALWEDD\n"
-" GWAHARDDEDIG MEWN RHAI GWLEDYDD\n"
-"\n"
-"Ni fydd MandrakeSoft S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd y "
-"bydd y gyfraith yn caniat�u,\n"
-"i fod yn atebol am unrhyw iawn o gwbl, arbennig, damweiniol, uniongyrchol "
-"neu anuniongyrchol (gan gynnwys\n"
-"heb gyfyngu ar iawndal am golli busnes, tarfu ar fusnes, colled ariannol, "
-"costau cyfreithiol, a chosb o ganlyniad\n"
-"i achos llys, neu unrhyw golled o ganlyniad) yn codi o lwytho i lawr "
-"cydrannau meddalwedd o un o safleoedd\n"
-" Mandrake Linux, sydd wedi eu gwahardd neu eu hatal mewn rhai gwledydd gan "
-"gyfreithiau lleol. Mae'r\n"
-"cyfrifoldeb cyfyngedig hwn yn perthyn i , ond heb ei gyfyngu i'r, cydrannau "
-"cryptograffiaeth cryf sy'n cael\n"
-"eu cynnwys o fewn y Cynnyrch Meddalwedd.\n"
-"3. Trwydded GPL a Thrwyddedau Cysylltiedig\n"
-"\n"
-"Mae'r Cynnyrch Meddalwedd yn cynnwys cydrannau sydd wedi eu creu gan "
-"bersonau a endidau gwahanol.\n"
-"Mae'r rhan fwyaf o'r cydrannau hyn yn cael eu llywodraethu gan dermau ac "
-"amodau Trwydded Gyhoeddus\n"
-"Cyffredinol (General Public Licence (GPL)), GNU, fydd yn cael ei gyfeirio "
-"ato  o hyn ymlaen fel \"GPL\", neu\n"
-"drwyddedau cyffelyb.. Mae'r rhan fwyaf o'r trwyddedau'n caniat�u i chi "
-"ddefnyddio, dyblygu, addasu neu\n"
-" ailddosbarthu'r cydrannau maent yn eu cynnwys. Darllenwch delerau ac amodau "
-"trwydded pob cydran cyn\n"
-"eu defnyddio. Dylai pob cwestiwn am drwydded cydran gael ei ofyn i awdur y "
-"gydran ac nid i MandrakeSoft.\n"
-"Mae'r rhaglenni ddatblygwyd gan MandrakeSoft yn cael eu llywodraethu o dan "
-"Drwydded GLP. Mae'r dogfennau\n"
-" ysgrifennwyd gan MandrakeSoft S.A. yn cael eu llywodraethu gan drwydded "
-"benodol. Darllenwch y dogfennau\n"
-"am fwy o fanylion.\n"
-"\n"
-"4. Hawliau Eiddo Deallusol\n"
-"\n"
-"Mae pob hawl cydrannau'r Cynnyrch Meddalwedd yn perthyn i'w hawduron "
-"perthnasol ac wedi eu hamddiffyn\n"
-"gan gyfreithiau eiddo deallusol a hawlfraint sy'n berthnasol i raglenni "
-"meddalwedd. Mae MandrakeSoft yn cadw\n"
-"ei hawl i newid neu addasu ei Gynnyrch Meddalwedd, yn rhannol neu yn gyfan, "
-"drwy unrhyw ddull ac ar gyfer\n"
-"unrhyw bwrpas. Mae \"Mandrake\", \"Mandrake Linux\"  a'r logos cysylltiedig "
-"yn nodau masnachol sy'n\n"
-"perthyn i MandrakeSoft S.A.\n"
-"\n"
-"5. Cyfreithiau Llywodraethol\n"
-"Os bydd unrhyw rhan o'r cytundeb hwn yn cael ei ddal yn ddi-rym, "
-"anghyfreithlon neu amherthnasol gan\n"
-"benderfyniad llys, bydd y rhan yma'n cael ei dynnu o'r cytundeb hwn. Byddwch "
-"yn parhau i fod yn rhwymedig\n"
-"i adrannau cymwys o'r cytundeb.\n"
-"Mae telerau ac amodau'r Drwydded hon yn cael eu llywodraethu gan Cyfreithiau "
-"Ffrainc. Mae'n ddymunol y\n"
-"bydd pob anghytundeb ar amodau'r drwydded yn cael eu datrys y tu allan i'r "
-"llys. Fel cam olaf, bydd yranghytundeb yn cael ei drosglwyddo i'r Llysoedd "
-"Barn, Paris - Ffrainc. Am unrhyw gwestiwn ynghylch yddogfen hon cysylltwch � "
-"MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Allweddell"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Dewiswch gynllun eich alweddell"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Dyma restr lawn o'r allweddellau ar gael"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Pa ddosbarth o osodiad ydych chi ei eisiau?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Gosod/Diweddaru"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Ydi hwn yn osodiad neu diweddariad?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Argymhellwyd"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Arbennigwr"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Diweddaru"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Diweddaru'r pecynnau'n unig"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Dewiswch math eich llygoden"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Porth Llygoden"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Dewiswch ba  borth cyfresol mae eich llygoden wedi cysylltu iddi"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Efelychiad botymau"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Efelychiad Botwm 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Efelychiad Botwm 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Ffurfweddu cardiau PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Ffurfweddu IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "dim rhaniadau ar gael"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Sganio rhaniadau i ganfod pwyntiau gosod"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Dewiswch y pwyntiau gosod"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nid wyf yn medru darllen eich tabl rhaniad, mae'n rhy lygredig. :(\n"
-"Mae modd i mi fynd ymlaen i ddiystyru rhaniadau gwael (Bydd yr\n"
-" HOLL DDATA'n cael ei golli!).  Yr ateb arall yw peidio gadael i\n"
-"DrakX newid y tabl rhaniad. (y gwall yw %s)\n"
-"\n"
-"Ydych chi'n cytuno i golli'r holl raniadau?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Methodd DrakX a darllen y tabl rhaniad yn gywir.\n"
-"Mae'n beryglus parhau!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nid oes lle rhydd ar gyfer yr ymlwythwr 1MB! Bydd y gosodiad yn parhau, ond "
-"i gychwyn y system bydd rhaid i chi greu rhaniad ymlwythwr yn DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Ni chanfyddwyd rhaniad gwraidd i wneud diweddariad"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Rhaniad Gwraidd"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Beth yw'r rhaniad gwraidd (/) ar eich system?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Bydd angen i chi ail gychwyn cyn i'r newidiadau yn eich tabl rhaniad ddigwydd"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Dewiswch y rhaniadau rydych am eu fformatio"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Gwirio blociau gwallus?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Yn fformatio rhaniadau"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creu a fformatio ffeil %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Dim digon o le cyfnewid i gyflawni'r gosodiad, ychwanegwch rhagor"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Chwilio am y pecynnau sydd ar gael"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Canfod pecynnau i'w uwchraddio"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Nid oes gan eich system ddigon o le ar �l ar gyfer gosodiad neu uwchraddiad "
-"(%d> %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Cwblhawyd (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Lleiafswm (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Argymhellwyd (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Dewiswch llwytho neu ddewis cadw pecyn ar ddisg meddal.\n"
-"Mae'r fformat yr un ar ddisgiau meddal wedi eu cynhyrchu drwy auto_install."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Llwytho o o ddisg meddal"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Llwytho o ddisg meddal"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Dewis pecynnau"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Rhowch ddisg meddal yn cynnwys dewis pecynnau yn y peiriant"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Cadw ar ddisg meddal"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Mae'r maint ddewiswyd yn fwy na'r lle ar gael"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Math o osodiad"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Nid ydych wedi dewis unrhyw grwpiau o becynnau.\n"
-"Dewiswch y gosodiad lleiaf rydych ei eisiau"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Gyda X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Gyda dogfennaethelfennol (argymhellir!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Gosodiad bychan iawn (yn arbennig dim urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Os yw'r holl CDau sydd yn y rhestr gennych, cliciwch Iawn.\n"
-"Os nad oes gennych un ohonynt, Cliciwch Diddymu.\n"
-"Os mae dim ond rhai CDau sydd ar goll, yna cliciwch Iawn."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom wedi ei labelu \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Paratoi'r gosodiad"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Gosod pecyn %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Ffurfweddiad �l osod"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Mewnosodwch y disg meddal Cychwyn ddefnyddiwyd yn gyrrwr %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Rhowch y disg meddal Diweddaru Modiwlau yng ngyrrwr %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Mae'n awr yn bosibl i chi lwytho meddalwedd i lawr ar gyfer amgryptio.\n"
-"\n"
-"RHYBUDD:\n"
-"\n"
-"Oherwydd gofynion cyffredinol amrywiol yn berthynol i'r meddalwedd hyn ac "
-"yn\n"
-" cael eu gosod gan amrywiol awdurdodau cyfreithiol, dylai cwsmeriaid a/neu\n"
-" ddefnyddwyr terfynol wneud yn siwr fod y cyfreithau yn eu hawdurdod "
-"cyfreithiol\n"
-" yn caniat�u iddynt lwytho i lawr, cadw a/neu ddefnyddio'r feddalwedd.\n"
-"\n"
-"Yn ogystal, dylai cwsmeriaid a/neu ddefnyddwyr terfynol fod yn arbennig o\n"
-" ymwybodol i beidio � thorri cyfraith eu hawdurdod cyfreithiol. Petai "
-"defnyddwyr\n"
-" a/neu ddefnyddwyr terfynol yn peidio parchu darpariaeth y cyfreithiau\n"
-" gweithredadwy,  yna byddant yn derbyn cosb ddifrifol.\n"
-"\n"
-"Ni fydd MandrakeSoft na'i gwneuthurwyr a/neu ddarparwyr, o dan unrhyw\n"
-" amod, fod yn gyfrifol am unrhyw ddifrod, arbennig, anuniongyrchol na\n"
-"damweiniol o gwbl (gan gynnwys, ond heb ei gyfyngu i golli elw, ymyrraeth "
-"ar\n"
-" fusnes, colli data masnachol na cholledion ariannol eraill, nag ymatebion\n"
-" terfynol a digollediad i'w dalu yn sgil penderfyniad llys) yn codi o "
-"ddefnydd,\n"
-" eiddo, neu'r unig lwytho i lawr y feddalwedd, i'r hyn y gall y cwsmer a/"
-"neu'r\n"
-" defnyddiwr terfynol gael mynediad iddo yn y pen draw wedi llofnodi'r "
-"cytundeb\n"
-" presennol.\n"
-"\n"
-"\n"
-"Am unrhyw ymholiadau yn berthnasol i'r cytundebau hyn, cysylltwch �:\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Mae'n bosibl i chi llwytho i lawr y pecynnau diweddaraf sydd wedi eu ryddhau "
-"ers i'r dosbaerthiad fod ar gael.\n"
-"\n"
-"Medrwch gael atgyweiriadau diogelwch a gwallau ond mae'n rhaid i\n"
-"chi fod wedi cysyllu �'r Rhyngrwyd i barhau.\n"
-"\n"
-"Ydych chi am osod y diweddariadau?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Cysylltu �'safle Mandrake Linux i estyn rhestr o'r drychau sydd ar gael"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Dewiswch ddrych lle mae modd estyn y pecynnau"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Cysylltu �'r drych i estyn y rhestr o becynnau sydd ar gael"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Pa un yw eich parth amser?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Cloc caledwedd wedi ei osod i GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Cydweddi amser awtomatig (defnyddio NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Gweinydd NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Gwasanaethwr CUPS pell"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nid oes argraffydd"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "A oes gennych gerdyn sain ISA?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Rhedwch \"sndconfig\" wedi'r gosodiad i ffurfweddu'ch cerdyn sain"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Heb ganfod cerdyn sain. Ceisiwch \"harddrake\" wedi'r gosodiad"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Crynodeb"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Llygoden"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Cylchfa amser"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Argraffydd"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Cerdyn ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Cerdyn sain"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Cerdyn Teledu"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Ffeiliau lleol"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Gosod cyfrinair gwraidd"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Dim cyfrinair"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Mae'r cyfrinair yn rhy syml ( rhaid iddo fod o leiaf %d nod o hyd)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Dilysu"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Dilysu LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "Sail dn LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Gwasanaethwr LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Dilysu LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Parth NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Gwasanaethwr NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Mae disg cychwyn yn darparu ffordd o gychwyn eich system Linux heb ddibynnu\n"
-"ar lwythwr cychwyn arferol. Mae hyn yn ddefnyddiol os ydych am osod SILO ar\n"
-"eich system, neu mae system weithredu arall wedi tynny SILO, neu nad yw "
-"SILO'n\n"
-"gweithio gyda eich ffurfweddiad caledwedd chi. Mae modd defnyddio disg "
-"cychwyn\n"
-" unigol hefyd gyda delwedd achub Mandrake, gan ei gwneud yn llawer haws "
-"adfer o\n"
-" fethiannau systemig sylweddol\n"
-"\n"
-"Os hoffech greu disg cychwyn ar gyfer eich system, rhowch ddisg meddal yn y "
-"gyrrwr\n"
-" cyntaf a chliciwch \"Iawn\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Gyrrwr disg meddal cyntaf"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Ail ddisg meddal"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Hepgor"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Mae'r disg cychwyn addasu yn cynnig ffordd i gychwyn eich system Linux heb\n"
-"ddibynnu ar eich cychwynnwr arferol. Mae hyn yn ddefnyddiol os nad ydych am\n"
-"osod LILO (neu grub) ar eich system, neu bod system weithredu arall yn "
-"dileu\n"
-"LILO, neu nad yw LILO'n gweithio gyda'ch ffurfweddiad caledwedd.\n"
-"Mae modd defnyddio disg cychwyn addasu hefyd gyda delwedd achub Mandrake,\n"
-"gan ei gwneud yn lawer haws adfer methiannau system sylweddol. Hoffech chi\n"
-"greu disg cychwyn ar gyfer eich system?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(RHYBUDD! Rydych yn defnyddio XFS ar gyfer eich rhaniad gwraidd,\n"
-"bydd creu disg cychwyn ar ddisg meddal 1.44Mb'n debygol o fethu,\n"
-"oherwydd mae XFS yn gofyn am yrrwr mawr iawn)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Nid oes gyrrwr disg meddal ar gael"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Dewiswch y gyrrwr disg meddal i'w ddefnyddio i greu disg cychwyn"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Rhowch ddisg meddal yn %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Creu disg cychwyn"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Paratoi llwythwr cychwyn"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Mae'n ymddangos fod gennychbeiriant OldWorld\n"
-"neu Anhysbys ac ni fydd llwythwr cychwyn yaboot\n"
-"yn gweithio ar eich cyfer\n"
-"Bydd y gosodiad yn parhau ond bydd\n"
-"rhaid defnyddio BootX i gychwyn\n"
-"eich peiriant."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Ydych chi eisiau defnyddio aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Gwall gosod aboot, \n"
-"ceisiwch orfodi gosodiad hyd yn oed os yw hynny'n dinistrio'r rhaniad cyntaf?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Gosod llwythwr cychwyn"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Methodd gosod llwythwr cychwyn. Digwyddodd y gwall canlynol:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Efallai bydd angen i chi newid eich dyfais cychwyn Open Firmware\n"
-"i alluogi'r llwythwr cychwyn. Os nad ydych yn gweld anogwr y llwythwr\n"
-"cychwyn wrth ail gychwyn, gwasgwch Command-Option-O-F wrth ail\n"
-"gychwyn a theipiwch: setenv boot-device %s,\\\\:tbxi\n"
-"\n"
-" Yna teipiwch: shut-down\n"
-"Wrth gychwyn eto dylech weld anogwr y llwythwr cychwyn."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Rhowch ddisg meddal  yng ngyrrwr %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Creu disg meddal awto gosod"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Nid yw rhai camau wedi eu cwblhau.\n"
-"\n"
-"Ydych chi wir eisiau gorffen?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Llongyfarchiadau, mae'r gosodiad wedi ei gwblhau.\n"
-"Tynnwch y cyfrwng cychwyn a gwasgu Return i ail gychwyn.\n"
-"\n"
-"\n"
-"Am wybodaeth am gywiriadau sydd ar gael ar gyfer y rhyddhad hwn o Mandrake\n"
-"Linux, cysylltwch a'r atodiad, sydd i'w gael yn:\n"
-"\n"
-"\n"
-"http://www.mandrakelinux.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Mae gwybodaeth ar ffurfweddu eich system ar gael ym mhenawdau �l osod\n"
-"yr Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Creu disg meddal awto gosod"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Mae modd awtomeiddio'r awto gosod, os hoffech\n"
-"chi, yn yr achos hwnnw bydd yn cymryd drosod y\n"
-"disg caled!!\n"
-"(mae hyn ar gyfer gosod ar flwch arall).\n"
-"\n"
-"Efallai byddai'n well gennych ai osod y gosodiad.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Awtomeiddwyd"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ail chwarae"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Cadw'r dewis becynnau"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Gosodiad %s Mandraks Linux"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> rhwng elfennau  | <Space> yn dewis | <F12> y sgrin nesaf "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu ar goll"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "consolehelper ar goll"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Dewis ffeil"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Uwch"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Elfennol"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Arhoswch"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Gwybodaeth"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Estyn y goeden"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Cau'r goeden"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Newid rhwng gwastad a'r grwp wedi ei ddidoli"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Dewis gwael, ceisiwch eto\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Eich dewis? (rhagosodedig %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Gwybodaeth i'w gyflawyno:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Eich dewis? (0/1, rhagosodedig %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Botwm '%s'.%s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Ydych chi eisiau clicio ar y botwm hwn?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Eich dewis? (rhagosodedig `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Mae yna lawer i ddewis o (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Dewiswch y rhif cyntaf o'r amrediad 10 rydych am ei olygu,\n"
-"neu wasgwch Enter i barhau.\n"
-"Eich dewis?"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=>Hysbysiad, mae label wedi newid:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Ail-gyflwyno"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tsiec (QWERTY)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Almaeneg"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spaenaidd"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Ffinaidd"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Ffrengig"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norwyaidd"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Pwylaidd"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rwsiaidd"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Swedaidd"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Bysellfwrdd DG"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Bysellfwrdd UDA"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albaniaidd"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenaidd (hen)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenaidd (teipiadur)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenaidd (ffonetig)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjan (lladin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgaidd"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bwlgaraidd (ffonetig)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bwlgaraidd (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilaidd (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusaidd"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Swisaidd (gosodiad Almaenig)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Swisaidd (gosodiad Ffrengig)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tsiec (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Almaenaidd (dim bysellau marw)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danaidd"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (UDA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwyaidd)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Swedaidd)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonaidd"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgaidd (gosodiad \"Rwsiaidd\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgaidd (gosodiad \"Lladinaidd\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Groegaidd"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hwngaraidd"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croataidd"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelaidd"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelaidd (Ffonetig)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranaidd"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Eislandaidd"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Eidalaidd"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Siapa�aidd 106 bysell"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Bysellfwrdd Coreaidd"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Lladin America"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuenaidd AZERTY (hen)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuenaidd AZERTY (newydd)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lithuenaidd \"rhes rhif\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuenaidd \"ffonetig\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latfiaidd"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonaidd"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Isalmaenaidd"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Pwylaidd (gosodiad qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Pwylaidd (gosodiad qwerty)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portiwgalaidd"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canada (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romanaidd (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romanaidd (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rwsiaidd (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slfenaidd"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slofacaidd (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovacaidd (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbaidd (cyrilig)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Bysellfwrdd Thai"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Bysellfwrdd Tajig"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Twrcaidd (model traddodiadol \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Twrcaidd (model modern \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Wcranaidd"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Bysellfwrdd UDA (rhyngwladol)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Fietnam�aidd \"rhes rhifol\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Iwgoslafaidd (lladin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Bysell Alt dde"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Y ddwy fysell Shift gyda'i gilydd"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Bysellau Control a Shift gyda'i gilydd"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Bysell CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Bysellau Ctrl ac Alt gyda'i gilydd"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Bysellau Alt a Shift  gyda'i gilydd"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Bysell \"Dewislen\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Bysell \"Windows\" chwith"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Bysell \"Windows\" de"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Gosodiadau cylch %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Tynnu'r cyfrolau rhesymegol yn gyntaf\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Nid oes cefnodgaeth PCIMA yn bodoli bellach ar gyfer cnewyllyn 2.2. "
-"Defnyddiwch cnewyllyn 2.4"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Llygoden - Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Llygoden Olwyn PS Generig"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 botwm"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Llygoden 2 Fotwm Generig"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generig"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Olwyn"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "cyfresol"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Llygoden 3 Botwm Generig"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Systemau  Llygoden"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Llygoden Logitech (cyfresol, hen fath C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 fotwm"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botwm"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "dim"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Dim llygoden"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Profwch y llygoden"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "I ysgogi'r llygoden,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "SYMUDWCH YR OLWYN!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Gorffen"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Nesaf ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Cynt"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Ydi hyn yn gywir?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Cysylltu �'r We"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Y ffordd mwyaf cyffredin i gysylltu � adsl yw pppoe\n"
-"Mae rhai cysylltiadau'n defnyddio pptp, a rhai dhcp.\n"
-"Os nad ydych yn gwybod pa un, dewiswch pppoe."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "usb Alcatel Speedtouch"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "defnyddiwch dhccp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "defnyddiwch pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "defnyddiwch pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Pa gleient dhcp ydych chi eisiau ei ddefnyddio?\n"
-"dhcpcd yw'r rhagosodedig"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nid oes addasydd rhwydwaith ethernet wedi ei ganfod ar eich system.\n"
-"Nid wyf yn medru gosod y math yma o gysylltiad."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Dewiswch rhag wyneb  y rhwydwaith"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Dewiswch pa addaswr rhwydwaith hoffech ei ddefnyddio i gysylltu �'r Rhyngrwyd"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "heb ganfod cerdyn rhwydwaith"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Ffurfweddu'r rhwydwaith"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Rhowch eich enw gwesteiwr os ydych yn gwybod\n"
-"beth ydyw Mae rhai gwasanaethwyr angen gwybod\n"
-"yr enw gwesteiwr i weithio. Dylai eich enw gwesteiwr\n"
-"fod yn enw cymhwysol llawn megis \"fymlwch.fynesg.fyco.com\""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Enw gwesteiwr"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Dewin Ffurfweddu'r Rhwydwaith"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem IDSN Allanol"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Cerdyn ISDN mewnol"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Pa fath o gysylltiad IDSN?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Pa ffurfweddiad IDSN sy'n well gennych?\n"
-"\n"
-"* Mae'r Hen ffurfweddiad yn defnyddio isdn4net. Mae'n\n"
-"  cynnwys offer pwerus ond mae'n anodd ei ffurfweddi ac nid\n"
-"yw'n safonol. \n"
-"\n"
-" *Mae'r ffurfweddiad Newydd yn haws i'w ddeall, yn fwy safonol\n"
-"  ond mae ganddo llai o offer.\n"
-"\n"
-"Rydym yn argymell y ffurfweddiad ysgafn.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Ffurfweddiad newydd (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Hen ffurfweddiad (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Ffurfweddiad ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Dewiswch eich darparwr.\n"
-"Os nad yw ar eich rhestr, dewiswch Heb ei Restri"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protocol Ewrop"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocol Ewrop (EDSSI)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protocol ar gyfer gweddill y byd"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocol ar gyfer gweddill y byd\n"
-" dim D-Channel (llinell les)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Pa brotocol ydych chi eisiau ei ddefnyddio?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Pa fath o gerdyn sydd gennych?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Dim syniad"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Os oes gennych gerdyn, dylai'r gwerthoedd ar y sgrin nesaf fod yn gywir.\n"
-"\n"
-"Os oes gennych gerdyn PCMCIA, rhaid i chi wybod irq ac io eich cerdyn.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Peidio"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Parhau"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Pa un yw eich cerdyn IDSN?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Rwyf wedi canfod cerdyn IDSN, ond nid wyf yn gwybod pa fath. Dewiswch un "
-"cerdyn PCI ar y sgrin nesaf."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Heb ganfod cerdyn PCI ISDN. Dewiswch un o'r sgrin nesaf."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Dewiswch ba borth cyfresol mae eich modem wedi cysylltu iddo."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Dewisiadau cyswllt ff�n"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Enw'r cysylltiad"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Rhif ff�n"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Dynodiad Mewngofnodi"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Seiliedig ar sgript"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Seiliedig ar derfynnell"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Enw parth"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Gwasanaethwr DNS Cyntaf (dewisol)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Ail Wasanaethwr DNS (dewisol)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Medrwch ddatgysylltu neu ailffurfweddu eich cyswllt"
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Medrwch ailffurfweddu eich cysylltiad"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Rydych wedi eich cysylltu �'r rhyngrwyd."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Medrwch gysylltu �'r Rhyngrwyd neu ailffurfweddu eich cyswllt"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Nid ydych wedi eich cysylltu �'r rhyngrwyd."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Cysylltu"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Dadgysylltu"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Ffurfweddu'r gysylltiad"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Cysylltiad �'r rhyngrwyd a'i ffurfweddiad "
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Rydym am ffurfweddu cysylltiad %s"
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Rydym yn awr yn mynd i ffurfweddu cysylltiad %s.\n"
-"\n"
-"\n"
-"Pwyswch Iawn i barhau."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Ffurfweddiad y Rhwydwaith"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Am eich bod yn gosod eich rhwydwaith, mae eich rhwydwaith eisoes wedi ei "
-"ffurfweddu\n"
-"Cliciwch Iawn i gadw eich ffurfweddiad, neu ddileu i ail ffurfweddi eich "
-"cysylltiad Rhyngrwyd a Rhwydwaith.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Croeso i Ddewin Ffurfweddu'r Rhwydwaith\n"
-"\n"
-"Rydym ar fin ffurfweddi eich cysylltiad rhyngrwyd/rhwydwaith.\n"
-"Os nad ydych am ddefnyddio awto ganfod, dad-diciwch y blwch dewis.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Dewiswch broffil i'w ffurfweddu"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Defnyddio awto ganfod"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Canfod dyfeisiadau..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Cysylltiad  modem arferol"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "canfyddwyd ar borth %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Cysylltiad ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "canfyddwyd %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Cysylltiad ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "canfyddwyd ar rhyngwyneb %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Cysylltiad cebl"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "canfyddwyd cysylltiad cebl"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "cysylltiad LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "cerdyn ethernet wedi ei ganfod"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Dewiiwch y math o gysylltiad rydych am ei ffurfweddu"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Rydych wedi ffurfweddu nifer o ffyrdd i gysylltu �'r Rhyngrwyd.\n"
-"Dewiswch ba un rydych am ei ddefnyddio.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Cysylltiad �'r Rhyngrwyd"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Ydych chi eisiau agor y cysylltiad wrth gychwyn y cyfrifiadur?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Ffurfweddiad y rhwydwaith"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Rhaid ail gychwyn y rhwydwaith"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Digwyddodd gwall wrth ail gychwyn y rhwydwaith:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Llongyfarchiadau, mae ffurfweddiad y rhwydwaith a'r Rhyngrwyd wedi gorffen\n"
-"Bydd y ffurfweddiad yn cael ei osod ar eich system\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Wedi i hyn gael ei wneud rydym yn argymell eich bod yn a'i gychwyn "
-"amgylchedd X i osgoi unrhyw anawsterau'n perthyn i enwau gwesteiwr.\n"
-"."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Digwyddod anhawsterau yn ystod y ffurfweddiad.\n"
-"Profwch eich cysylltiad drwy net_monitor neu mcc. Os nad yw eich cysylltiad "
-"yn gweithio, efallai y byddwch eisiau ailgychwyn y ffurfweddiad"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"Rhybudd!! Cafodd y ddyfais hon ei ffurfweddu o'r blaen i gysylltu �'r "
-"Rhyngrwyd.\n"
-"Derbyniwch y cynnig i gadw'r ddyfais wedi ei ffurfweddi.\n"
-"Bydd newid y meysydd islaw'n newid y ffurfweddiad."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Rhowch ffurfweddiad IP ar gyfer y peiriant hwn\n"
-"Dylai pob eitem ei roi fel cyfeiriad IP nodiant collnod degymol\n"
-"(e.e.1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Ffurfweddu dyfais rhwydwaith %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (gyrrwr %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Cyfeiriad IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP awtomatig"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "dylai cyfeiriad IP fod mewn fformat  1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Rhowch eich enw gwesteiwr.\n"
-"Dylai eich enw gwesteiwr fod yn enw gwesteiwr llawn gymwys.\n"
-"megis \"fymlwch.fynesg.fyngho.com\".\n"
-"Medrwch hefyd gynnig eich cyfeiriad IP os oes gennych un"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Gwasanaethwr DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Mynedfa (e.e. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dyfais mynedfa"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Ffurfweddiad dirprwyon"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Dirprwy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Dirprwy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Dilynnwch cyfernod cerdyn rhwydwaith (defnyddiol ar gyfer gliniadur)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Dylai dirprwyon fod yn gyfanrif!"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Dylai rhif porth fod yn ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Ffurfweddiad rhyngrwyd"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Hoffech chi gysylltu �'r Rhyngrwyd nawr?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Profi eich cysylltiad..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Mae'r system wedi cysylltu �'r Rhyngrwyd."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Am resymau diogelwch, bydd yn cael ei ddatgysylltu."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Nid yw'n ymddangos i'ch system gysylltu �'r rhyngrwyd.\n"
-"Ailffurfweddwch eich cysylltiad."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Ffurfweddiad y Cysylltiad"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Llanwch neu diciwch y maes islaw"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ y cerdyn"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Cof Cerdyn (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO'r Cerdyn"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_O y cerdyn"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 y cerdyn"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Eich rhif ff�n personol"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Enw darparwr (eng. darparwr.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Rhif ff�n y darparwr"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Dns 1 y darparwr (dewisol)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Dns 2 y darparwr (dewisol)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Dewiswch eich gwlad"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Modd deialu"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Cyflymder y cysylltiad"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Oediad yn y cysylltiad (mewn eiliadau)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Mewngofnod Cyfrif (enw defnyddiwr)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Cyfrinair y Cyfrif"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "maethodd y gosodiad"
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Nid yw'r rhainad estynedig yncael ei gynnal ay y platfform hwn"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Mae gennych dwll yn nhabl eich rhaniad ond nid wyf yn medru ei ddefnyddio\n"
-"Yr unig ateb yw i symud eich rhaniadau cynradd fel bo'r twll nesaf at y "
-"rhaniadau estynedig "
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Methodd adfer o ffeil %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Ffeil wrth gefn gwallus"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Gwall wrth ysgrifennu i ffeil %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Mae rhywbeth gwael yn digwydd ar eich disg.\n"
-"Mae prawf i fesur ei gyfanrwydd wedi methu. \n"
-"Nid oes gwerth ysgrifennu i'r ddisg"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "rhaid cael"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "pwysig"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "hyfryd iawn"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "hyfryd"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "efallai"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Argraffydd lleol"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Argraffydd pell"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Argraffydd ar wasanaethwr CUPS pell"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Argraffydd ar wasanaethwr lpd pell"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Argraffydd rhwydwaith (TCP/Soced)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Argraffydd ar wasanaethwr SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Argraffydd ar wasanaethwr NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Rhowch URI dyfais argraffydd"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Peipio'r gwaith i orchymyn"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Model anhysbys"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Argraffyddion Lleol"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Argraffyddion Pell"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " ar borth paralel \\/\"%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", argraffydd USB \\/\"%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", dyfais amlbwrpas ar borth paralel \\/\"%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", dyfais amlbwrpas ar USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dyfais amlbwrpas ar HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ",dyfais amlbwrpas"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", argraffu i %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "ar wasanaethwr LPD  \"%s\", argraffydd \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", gwesteiwr TCP/IP  \"%s\", porth %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "ar wasanaethwr Windows  \"%s\", rhannu \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "ar wasanaethwr Novell \"%s\", argraffydd \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", defnyddio gorchymyn %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Argraffydd crai (dim gyrrwr)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(ar %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(ar y peiriant hwn)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Ar wasanaethwr CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr "(Rhagosodedig)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Dewiswch Gysylltiad Argraffydd"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Sut mae'r argraffydd wedi ei gysylltu?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Nid oes angen ffurfweddu argraffyddion ar wasanaethwyr CUPS pell: byddant yn "
-"cael eu canfod yn awtomatig."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Furfweddiad CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Enwch wasanaethwr CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Gyda gwasanaethwyr CUPS nid oes rhaid i chi ffurfweddu unrhyw argraffydd "
-"yma; mae gwasanaethwyr CUPS yn eich hysbysu'n awtomatig am eu "
-"hargraffyddion. Mae'r holl argraffyddion cyfredol sy'n hysbys i'ch peiriant "
-"yn cael eu rhestri yn adran \"Argraffyddyddion Pell\" prif ffenestr "
-"Printerdrake. Pan nad yw eich gwasanaethwr CUPS yn eich rhwydwaith lleol, "
-"rhaid rhoi i'r gwasanaethwr CUPS gyfeiriad IP ac yn ddewisol rhif y porth i "
-"dderbyn gwybodaeth am yr argraffydd gan y gwasanaethwr, neu gadewch y "
-"meysydd yn wag."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Fel rheol, mae CUPS yn cael ei ffurfweddu'n awtomatig yn �l amgylchedd eich "
-"rhwydwaith, fel bo modd i chi gael mynediad at yr argraffyddion ar "
-"wasanaethwr CUPS yn eich rhwydwaith lleol. Os nad yw hyn yn gweithio'n iawn, "
-"diffoddwch \"Ffurfweddiad CUPS awtomatig\" a golygwch eich ffeil /etc/cups/"
-"cupsd.conf gyda llaw. Peidiwch anghofio ailgychwyn CUPS eto (gorchymyn: "
-"\"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Dylai cyfeiriad IP edrych fel 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Dylai rhif porth fod yn gyfanrif!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP gwasanaethwr CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Porth"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Furfweddiad CUPS Awtomatig"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Canfod dyfeisiadau..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Profwch y pyrth"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Ychwanegu argraffydd newydd"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-" Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Mae'r dewin yn caniat�u i chi osod argraffyddion lleol neu bell i'w "
-"defnyddio o'r peiriant hwn a hefyd gan argraffyddion eraill ar eich "
-"rhwydwaith.\n"
-"\n"
-"Bydd yn gofyn am yr holl wybodaeth angenrheidiol i osod yr argraffydd a bydd "
-"yn rhoi mynediad i'r holl yrwyr argraffyddion sydd ar gael, dewisiadau "
-"gyrwyr a mathau o gysylltiadau argraffyddion."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Argraffydd Lleol"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Croeso i Ddewin Gosod Argraffydd\n"
-"\n"
-"Bydd y dewin yn eich cynorthwyo i osod eich argraffydd(ion) sy'n "
-"gysylltiedig �'r cyfrifiadur hwn.\n"
-"Cysylltwch yr argraffydd(ion) i'r cyfrifiadur a'i(u) troi mlaen. Cliciwch "
-"\"Nesaf\" pan rydych yn barod, ac ar \"Diddymu\"pan nad ydych am osod eich "
-"argraffydd(ion) ar hyn o bryd.\n"
-"\n"
-"Sylwch fod rhai cyfrifiaduron yn medru methu yn ystod awto ganfod "
-"argraffydd, diffoddwch \"Awto ganfod argraffyddion\" i osod argraffydd heb "
-"awto ganfod. Defnyddiwch \"Modd Arbenigwr\" printdrake pan fyddwch am osod "
-"argraffydd pell os nad yw printerdrake yn ei restri'n awtomatig."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Awto ganfod argraffyddion"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Llongyfarchiadau, mae eich argraffydd wedi ei osod a'i ffurfweddu!\n"
-"\n"
-"Os ydych am ychwanegu, tynnu neu ailenwi argraffydd, neu os ydych am newid y "
-"gosodiadau dewis rhagosodedig (mewnflwch papur, ansawdd y printiad,...0, "
-"dewiswch \"Argraffydd\" yn adran \"Caledwedd\" Canolfan Rheoli Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Awto ganfod Argraffyddion"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Mae Printerdrake yn medru awto ganfod eich argraffyddion paralel ac USB "
-"lleol, ond sylwch fod awto ganfod yn MEDRU RHEWI EICH SYSTEM AC ARWAIN AT "
-"SYSTEMAU FFEIL LLWGR! Gwnewch hyn AR EICH MENTER EICH HUN!\n"
-"\n"
-"Ydych eisiau i'ch argraffydd gael ei awto ganfod?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Defnyddio awto ganfod"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Gosod argraffydd gyda llaw"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Canfyddwyd %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Argraffydd ar borth paralel \\/\"%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Argraffydd USB \\/\"%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Heb ganfod argraffydd lleol! I osod argraffydd gyda llaw, rhowch enw'r "
-"ddyfais /enw ffeil ar y llinell mewnbwn (Porth Paralel: /dev/lp0, /"
-"dev/,...., cyfatebol i LPT1:, LPT2,..., argraffydd USB 1af: /dev/usb/lp0,  "
-"ail argraffydd USB: /dev/usb/lp1,...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Rhaid cynnig enw dyfais neu ffeil!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Heb ganfood argraffydd lleol!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Dim ond ar �l cwblhau'r gosodiad mae modd gosod argraffyddion rhwydwaith. "
-"Dewiswch \"Caledwedd\" ac yna \"Argraffydd\" yng Nghanolfan Rheoli Mandrake"
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"I osod argraffyddion rhwydwaith, cliciwch \"Diddymu\", trowch i \"Modd "
-"Arbenigwr\", clicio \"Ychwanegu argraffydd newydd\" eto."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Cafodd yr argraffydd canlynol ei awto ganfod, os nad hwn yw'r un rydych am "
-"ei ffurfweddu, rhowch enw dyfais/enw ffeil ar y llinell mewnbwn."
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Dyma restr o'r holl argraffyddion gafodd eu awto ganfod. Dewiswch yr "
-"argraffydd rydych am ei osod neu rhowch enw dyfais/ffeil yn y llinell "
-"mewnbwn."
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Cafodd yr argraffydd hwn ei awto ganfod. Bydd ffurfweddi'r argraffydd yn "
-"digwydd yn awtomatig. Os na chafodd eich argraffydd ei ganfod yn gywir neu "
-"byddai'n well gennych ffurfweddiad unigryw i'ch argraffydd, cychwynnwch "
-"\"Ffurfweddiad gyda Llaw\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Dyma restr o'r holl argraffyddion gafodd eu awto ganfod. Dewiswch yr "
-"argraffydd rydych am ei osod. Bydd ffurfweddu'r argraffydd yn digwydd yn "
-"awtomatig. Os na chafodd eich argraffydd ei ganfod yn gywir neu byddai'n "
-"well gennych ffurfweddiad unigryw i'ch argraffydd, cychwynnwch "
-"\"Ffurfweddiad gyda Llaw\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Dewiswch y porth y mae eich argraffydd wedi cysylltu iddo neurhowch enw "
-"dyfais/ffeil ar y ninell mewnbwn"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Dewiswch y porth mae'r argraffydd wedi cysylltu iddo."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Pyrth paralel: /dev/lp0, /dev/lp1, ..., yn cyfateb i LPT1:, LPT2:, ..., "
-"argraffydd USB cyntaf: /dev/usb/lp0, ail argraffydd USB : /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Rhaid dewis/rhoi argraffydd/dyfais!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Ffurfweddiad gyda llaw"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"A yw eich argraffydd yn ddyfais amlbwrpas gan HP  (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 gyda sganiwr)"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Gosod pecynnau HPOJ"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Gwirio a ffurfweddu dyfais HPOJ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Gosod pecynnau SANE"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Sganio eich dyfais HP aml bwrpas"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Gwneud porth argraffydd ar gael ar gyfer CUPS"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Darllen cronfa ddata argraffydd..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Dewisiadau Argraffydd lpd Pell"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"I ddefnyddio argraffydd lpd pell, rhaid darparu enw gwesteiwr gwasanaethwr "
-"yr argraffydd ac enw'r argraffydd ar y gwasanaethwr hwnnw."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Enw gwesteiwr pell"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Enw'r argraffydd pell"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Mae enw'r gwesteiwr pell ar goll!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Mae enw'r argraffydd pell ar goll!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Dewisiadau Argraffydd SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"I argraffu i argraffydd SMB, rhaid darparu enw gwesteiwr SMB (Sylwer! Mi all "
-"fod yn wahanol i'w enw gwesteiwr TCP/IP!) ac o bosibl cyfeiriad IP'r "
-"gwasanaethwr argraffu, yn ogystal �'r enw rhannu ar gyfer yr argraffydd "
-"rydych am gael mynediad iddo ac unrhyw enw defnyddiwr, cyfrinair a "
-"gwybodaeth am grwp gwaith perthynol."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Gwasanaethwr gwesteiwr SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP Gwasanaethwr SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Rhannu enw"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grwp gwaith"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Rhaid rhoi un ai enw'r gwasanaethwr neu IP'r gwasanaethwr!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Mae enw rhannu Samba ar goll!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Dewisiadau Argraffydd NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"I argraffu ar argraffydd NetWare, rhaid i chi rhoi enw gwasanaethwr argraffu "
-"NetWare (Sylwer! gall fod yn wahanol i'w enw gwesteiwr TCP/IP) yn ogystal "
-"�'r rhes waith argraffu am yr argraffydd rydych am gael mynediad iddo ac "
-"unrhyw enw defnyddiwr a chyfrinair perthnasol."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Gwasanaethwr Argraffydd"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Enw Rhes Argraffu"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Mae enw gwasanaethwr NCP ar goll!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Mae enw rhes NCP ar goll"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Dewisiadau Argraffydd TCP/Soced"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"I argraffu i argraffydd TCP neu soced, rhaid i chi ddarparu enw gwesteiwr yr "
-"argraffydd ac yn ddewisol rhif y porth. Ar wasanaethwyr HP JetDirect rhif y "
-"porth, fel rheol, yw 9100, gall amrywio ar wasanaethwyr eraill. Gweler "
-"llawlyfr eich caledwedd"
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Enw'gwesteiwr yr argraffydd"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Mae enw'r gwesteiwr argraffu ar goll!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI Dyfais Argraffu"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Medrwch enwi'n benodol URI i gael mynediad i'r argraffydd. Rhaid i'r URI "
-"gyflawni manylyn un ai CUPS neu Foomatic. Sylwer nad yw pob math o URI cyn "
-"cael eu cynnal gan bob sbwlydd ."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Rhaid cynnig URI dilys!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Mae pob argraffydd angen enw (e.e. \"argraffydd\". Nid oes angen llanw "
-"meysydd Disgrifiad a Lleoliad. Lle ar gyfer sylwadau'r defnyddiwr sydd yma."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Enw'r argraffydd"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Disgrifiad"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lleoliad"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Paratoi cronfa ddata argraffydd..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Model eich argraffydd"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Mae Printerdrake wedi cymharu'r enw model yn sgil yr awto ganfod gyda'r "
-"modelau sy'n cael eu rhestri yn ei gronfa ddata i gael y cydweddiad gorau. "
-"Gall y dewis fod yn anghywir, yn arbennig os nad yw eich argraffydd yn cael "
-"ei enwi yn y gronfa ddata. Felly, edrychwch i weld � yw'r dewis yn gywir a "
-"chliciwch \"Model cywir\" os yw ac os nad yw, cliciwch \" Dewiswch y model "
-"gyda llaw\" fel bo modd i chi ddewis eich argraffydd gyda llaw ar y sgrin "
-"nesaf.\n"
-"\n"
-"Ar gyfer eich argraffydd mae Printerdrake wedi canfod\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Mae'r model yn gywir"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Dewiswch y model gyda llaw"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Dewis model yr argraffydd"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Pa fath o argraffydd sydd gennych?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Gwiriwch os yw Printerdrake wedi awto ganfod eich argraffydd yn gywir. "
-"Chwiliwch am y model cywir pan fo'r cyrchwr yn sefyll ar y model anghywir "
-"neu ar \"Argraffydd bras\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Nid yw eich argraffydd wedi ei rhestri, dewiswch un cyfatebol (gw. llawlyfr "
-"eich argraffydd) neu un tebyg."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Ffurfweddiad OKI winprinter "
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Rydych yn ffurfweddu winprinter laser OKI. Mae'r argraffydd hwn\n"
-"yn defnyddio protocol cyfathrebu arbennig. Dim ond trwy eu cysylltu �'r "
-"porth paralel cyntaf mae modd cael yr argraffydd hwn i weithio. Pan fo eich "
-"argraffydd wedi ei gysylltu i borth arall neu i flwch gwasanaethwr argraffu, "
-"cysylltwch yr argraffydd i'r porth paralel cyntaf cyn argraffu tudalen "
-"brawf. Os na wnewch chi hynny, ni fydd yr argraffydd yn gweithio. Bydd eich "
-"gosodiad ynghylch ymath o gysylltiad yn cael ei anwybyddu gan y gyrrwr."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Ffurfweddiad inkjet Lexmark"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Mae'r gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark yn cynnal "
-"argraffyddion lleol, yn unig. Cysylltwch eich argraffydd i borth lleol neu "
-"ffurfweddwch ef i'r peiriant mae'n gysylltiedig ag ef."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"I fedru argraffu gyda eich argraffydd inkjet Lexmark a'r ffurfweddiad hwn, "
-"bydd angen gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark (http://"
-"www.lexmark.com/). Ewch i'w safle yn yr UDA a chliciwch ar y botwm \"Drivers"
-"\". Yna dewiswch eich model ac yna \"Linux\" fel system weithredu. Mae'r "
-"gyrwyr yn dod fel pecynnau RPM neu sgriptiau cragen gyda gosodiad graffigol "
-"rhyngweithiol. Nid oes angen i chi wneud y ffurfweddiad drwy'r wyneb "
-"graffigol. Diddymwch yn syth wedi'r cytundeb trwyddedu. Yna argraffwch "
-"dudalennau'r alinio'r pen argraffu gyda \"lexmarkmaintain\" a newid "
-"gosodiadau aliniad y pen gyda'r rhaglen."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Gosodiadau rhagosodedig yr argraffydd\n"
-"\n"
-"Dylech wneud yn siwr fod maint y dudalen a'r modd math inc/argraffu (os ar "
-"gael) a hefyd bod ffurfweddiad caledwedd argraffyddion laser (cof, uned "
-"ddeublyg, blychau papur ychwanego) wedi eu gosod yn gywir. Sylwer bod fod "
-"argraffiad ansawdd/cydraniad uchel iawn yn medru arafu'r argraffu'n "
-"sylweddol.."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Rhaid i ddewis %s fod yn gyfanrif"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Rhaid i ddewis %s fod yn rhif!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Dewis %s allan o amrediad!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Ydych chi am osod argraffydd  (\"%s\")\n"
-"fel yr argraffydd rhagosodedig?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Tudalennau prawf"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Dewiswch y tudalennau prawf rydych am eu hargraffu\n"
-"Sylwer: gall y dudalen brawf llun camera gymryd cryn dipyn o amser cyn cael "
-"ei argraffu ac ar argraffydd laser heb lawer o gof mae'n bosibl na ddaw o "
-"gwbl. Yn y rhan fwyaf o achosion, mae'r prawf tudalen safonol yn ddigonol."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Dim tudalennau prawf"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Argraffu"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Tudalen prawf safonnol"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Prawf tudalen arall (Llythyr)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Prawf tudalen arall (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Tudalen prawf llun"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Peidiwch argraffu tudalennau prawf"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Argraffu tudalen(nau) prawf..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Mae tudalennau prawf wedi eu hanfon i'r argraffydd.\n"
-"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
-"Statws argraffu:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Mae tudalen(nau) prawf wedi eu hanfon at yr argraffydd.\n"
-"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "A weithiodd hwnnw'n iawn?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Argraffydd bras"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"I argraffu ffeil o'r linell orchymyn (ffenestr derfynnell) mae modd "
-"defnyddio un ai'r gorchymyn \"%s <file>\" neu offeryn argraffu graffigol: "
-"\"xpp <file>\" neu \"kprinter <file>\". Mae'r offeryn graffigol yn caniat�u "
-"chi ddefnyddio'r argraffydd ac i newid gosodiadau dewis yn hawdd.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Mae modd defnyddio'r gorchmynion hyn ym maes \"Gorchmynion Argraffu\" y "
-"deialogau argraffu mewn nifer o raglenni, ond  yma nid ydynt yn darparu'r "
-"enw ffeil am fod y ffeil i'r argraffydd yn cael ei ddarparu gan y rhaglen.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Mae'r gorchymyn \"%s\" hefyd yn caniatau i newid y gosodiadau dewis ar gyfer "
-"tasg argraffu penodol. Ychwanegwch y gosodiadau angenrheidiol i'r llinell "
-"gorchymyn, e.e \"%s <file>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Er mwyn cael gwybodaeth am y dewisiadau sydd ar gael ar gyfer yr argraffydd "
-"cyfredol darllenwch un ai'r rhestr isod neu cliciwch ar y botwm \"Rhestr "
-"dewis argraffu\"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Dyma restr o'r dewisiadau argraffu sydd ar gael ar gyfer yr argraffydd "
-"presennol:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynnell) defnyddiwch "
-"orchymyn \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Mae modd defnyddio'r gorchymyn hwn ym maes \"Gorchymyn argraffu\" deialog "
-"nifer o raglenni. Ond peidiwch � rhoi'r enw ffeil yma oherwydd bod y ffeil "
-"i'w argraffu wedi ei ddarparu gan y rhaglen.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"I edrych ar y rhestr o'r dewisiadau sydd ar gael ar gyfer yr argraffydd "
-"cyfredol cliciwch ar fotwm \"Rhestr dewisiadau argraffu\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynnell) defnyddiwch y "
-"gorchymyn \"%s <file>\" or \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Mae modd hefyd i ddefnyddio rhag wyneb graffigol \"xpdq\" i osod dewisiadau "
-"a thrin gwaith argraffu.\n"
-"\n"
-"Os ydych yn defnyddio KDE fel amgylchedd pen bwrdd mae gennych \"botwm "
-"argyfwng\", eicon ar y pen bwrdd, wedi ei labelu \"Atal yr Argraffydd!\", "
-"fydd yn stopio 'r holl waith argraffu'n syth pan fyddwch yn ei glicio. Mae "
-"hyn yn ddefnyddiol pan fydd y papur wedi mynd yn sownd, ag ati.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Mae'r gorchmynion \"%s\" a \"%s\" hefyd yn caniat�u newid y gosodiadau dewis "
-"ar gyfer tasg argraffu penodol. Ychwanegwch y gosodiadau angenrheidiol i'r "
-"llinell gorchymyn, e.e \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Cau"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Argraffu/Sganio ar  \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Argraffu ar argraffydd \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Rhestr ddewis argraffu"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Mae eich dyfais aml bwrpas HP wedi cael ei ffurfweddu'n awtomatig i fedru "
-"sganio. Mae modd i chi sganio gyda \"scanimage\" (\"scanimage -d hp:%s\" i "
-"bennu pa un os oes gennych fwy nag un) o'r llinell orchymyn neu gyda rhag "
-"wynebau graffigol  \"xscanimage\" neu \"xsane\". Os ydych yn defnyddio GIMP, "
-"medrwch sganio hefyd, drwy ddewis y man priodol yn y ddewislen \"Ffeil\"/"
-"\"Cipio\". Galwch hefyd \"man scanimage\" a \"man sane-hp\" ar y linell "
-"orchymyn i dderbyn mwy o wybodaeth.\n"
-"\n"
-"Peidiwch defnyddio \"scannerdrake\" ar gyfer y ddyfais hon."
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Mae eich dyfais aml bwrpas HP wedi cael ei ffurfweddu'n awtomatig i fedru "
-"sganio. Medrwch sganio o'r llinell orchymyn gyda \"ptal-hp %s scan ...\".. "
-"Nid yw sganio drwy gyfrwng rhyng wyneb graffigol na GIMP yn cael ei gynnal "
-"eto ar gyfer eich dyfais. Mae rhagor o wybodaeth i'w gael yn ffeil \"/usr/"
-"share/doc/hpoj-0.8/ptal-hp-scan.html\" ar eich system.  Os oes gennych HP "
-"LaserJet 1100 neu 1200 yna dim ond os oes gennych y dewis sganio wedi ei "
-"osod mae modd sganio.\n"
-"Peidiwch defnyddio \"scannerdrake\"  ar gyfer y ddyfais hon."
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Darllen data argraffydd..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Trosglwyddo ffurfweddiad yr argraffydd"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Mae modd i chi gop�o ffurfweddiad yr argraffydd fel wnaethoch o yspwlydd %s "
-"i %s eich yspwlydd cyfredol. Bydd yr holl ddata ffurfweddi (enw argraffydd, "
-"disgrifiad, lleoliad, math o gysylltiad a gosodiadau dewis rhagosodedig) yn "
-"cael eu trosi, ond ni fydd y gwaith argraffu'n cael eu trosi.\n"
-"Ni fydd yr holl waith argraffu'n cael eu trosi, am y rhesymau canlynol:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"Nid yw CUPS yn cefnogi argraffyddion ar wasanaethwyr Novell neu "
-"argraffyddion sy'n anfon data mewn gorchymyn ffurf -rhydd.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"Mae PDQ yn cynnal argraffyddion lleol,  LDP pell, a Socket/TCP, yn unig.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "Nid yw LPD na LPRng yn cynnal argraffyddion IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Yn ogystal, nid oes modd trosglwyddo rhesi grewyd gan y rhaglen hon na "
-"\"foomatic-configure\"."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Hefyd nid oes modd trosglwyddo argraffyddion ffurfweddwyd gyda ffeiliau PPD "
-"ddarparwyd gan eu gwneuthurwyr na gyrrwyr CUPS brodorol."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Nodwch yr argraffydd rydych am ei drosglwddo a chliciwch\n"
-"\"Trosglwyddo\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Peidio trosglwyddo argraffydd"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Trosglwyddo"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Mae argraffydd o'r enw \"%s\" yn bodoli eisoes yn %s.\n"
-"Cliciwch \"Trosglwyddo\" i ysgrifennu drosto.\n"
-"Mae modd i chi osod enw newydd arno neu ei hepgor."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Dylai enw'r argraffydd gynnwys llythrennau, rhifau a'r tanlinellu, yn unig"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Mae argraffydd \"%s\" yn bodoli eisoes,\n"
-"ydych chi wir eisiau ailysgrifennu ei ffurfweddiad?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Enw'r argraffydd newydd"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Trosglwyddo %s..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Rydych wedi trosglwyddo eich argraffydd rhagosodedig blaenorol rhagosodedig "
-"(\"%s\"). A ddylai fod yn argraffydd rhagosodedig y system argraffu newydd %"
-"s ?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Adnewyddu data'r argraffydd..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Ffurfweddiad argraffydd pell"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Cychwyn y rhwydwaith..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Ffurfweddwch y rhwydwaith"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Nid yw swyddogaethau'r rhwydwaith wedi ei ffurfweddu"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Ydych chi am ffurfweddi argraffydd pell. Mae hyn angen mynediad ar "
-"rwydwaith, ond nid yw eich rhwydwaith wedi ei ffurfweddu eto. Os ydych am "
-"fynd ymlaen heb ffurfweddiad rhwydwaith, ni bydd modd i chi ddefnyddio'r "
-"argraffydd rydych yn ei ffurfweddu ar hyn o bryd. Beth ydych am ei wneud?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Mynd yn eich blaen heb ffurfweddu'r rhwydwaith"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Nid oes modd cychwyn y ffurfweddiad rhwydwaith wnaed yn ystod y gosodiad. "
-"Gwiriwch p'un ai yw'r rhwydwaith yn darparu mynediad ar �l cychwyn eich "
-"system a chywiro'r ffurfweddiad gan ddefnyddio Canolfan Rheoli Mandrake, "
-"adran \"Rhwydwaith a'r Rhyngrwyd\"/\"Cysylltiad\", ac yna gosod yr "
-"argraffydd, eto gan ddefnyddio Canolfan Rheoli Mandrake, adran \"Caledwedd\"/"
-"\"Argraffydd\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Nid oedd mynediad i'r rhwydwaith yn rhedeg ac nid oedd modd ei gychwyn. "
-"Gwiriwch eich ffurfweddiad a'ch caledwedd. Yna ceisiwch ail ffurfweddi eich "
-"argraffydd."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Ailgychwyn system argraffu..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "uchel"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "Paranoia"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Gosod system argraffu yn lefel diogelwch %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Rydych ar fin gosod system argraffu %s ar system sy'n rhedeg lefel diogelwch "
-"%s. \n"
-"\n"
-"Mae'r system yn rhedeg daemon (proses gefndirol) sy'n aros am waith argraffu "
-"ac yna yn eu trin. Mae'r daemon hefyd yn gyraeddadwy gan beiriannau pell "
-"drwy'r rhwydwaith ac felly'n bwynt ymosod. Felly, dim ond ychydig o "
-"ddaemonau sy'n cael eu cychwyn yn rhagosodedig, ar y lefel diogelwch hwn.\n"
-"\n"
-"Ydych chi wir eisiau ffurfweddu argraffu ar y peiriant hwn?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Cychwyn y system argraffu wrth gychwyn y cyfrifiadur"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Ni fydd system argraffu (%s) yn cychwyn yn awtomatig pan fydd y peiriant yn "
-"cael ei gychwyn.\n"
-"\n"
-"Mae'n bosibl fod y cychwyn awtomatig wedi ei ddiffodd wrth newid i lefel "
-"diogelwch uwch, am fod a system argraffu'n bwynt tebygol ar gyfer "
-"ymosodiadau.\n"
-"\n"
-"Ydych chi am i'r cychwyn awtomatig gael ei droi ymlaen eto?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Gwirio'r meddalwedd sydd wedi ei osod..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Tynnu LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Tynnu LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Dewiswch Sbwlydd Argraffydd"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Pa system argraffu(sbwlydd) ydych chi am ei ddefnyddio?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Ffurfweddu argraffydd \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Gosod Foomatic..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Dewisiadau argraffydd"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Paratoi PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Ffurfweddi'u rhaglenni"
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Hoffech chi ffurfweddu argraffu?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "System argraffu."
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Mae'r argraffyddion canlynol wedi eu ffurfweddu. Cliciwch ar un i newid ei "
-"osodiadau; ei wneud yn argraffydd rhagosodedig; i edrych am wybodaeth "
-"amdano; neu i wneud argraffydd CUPS pell ar gael ar gyfer Star Office/"
-"OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Mae'r argraffyddion canlynol wedi eu ffurfweddi. Cliciwch ar un i newid ei "
-"osodiadau; ei wneud yn argraffydd rhagosodedig; i edrych am wybodaeth amdano."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Adnewyddu rhestr argraffyddion (dangos pob argraffydd CUPS pell sydd ar gael)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Newidiwch y system argraffu"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modd Arferol"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Ydych chi eisiau ffurfwedu argraffydd arall?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Newid ffurfweddiad yr argraffydd"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Argraffydd %s\n"
-"Beth ydych am ei newid ar yr argraffydd hwn?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Gwna!!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Math o gyswllt argraffydd"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Enw'r argraffydd, disgrifiad, lleoliad"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Gwneuthurwr yr argraffydd, model, gyrrwr"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Gwneuthurwr yr argraffydd, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Gosod yr argraffydd fel y rhagosodedig"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Ychwanegwchyr argraffydd hwn i Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Tynnwch yr argraffydd hwn o Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Argraffu tudalennau prawf"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Gwybod sut i ddefnyddio'r argraffydd"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Tynnu argraffydd"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Tynnu hen argraffydd \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Argraffydd rhagosodedig"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Mae argraffydd \"%s\" wedi ei osod fel yr argraffydd rhagosodedig."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Ychwanegu argraffydd i Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"Mae argraffydd \"%s\" wedi ei ychwanegu'n llwyddiannus i Star Office/"
-"OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-"Wedi methu ag ychwanegu argraffydd \"%s\" i Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Tynnu'r argraffydd o Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"Cafodd argraffydd \"%s\" ei dynnu'n llwyddiannus o Star Office/OpenOffice."
-"org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Methwyd � thynnu argraffydd \"%s\" o Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ydych chi wir eisiau tynnu argraffydd \"%s\""
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Tynnu argraffydd \"%s\"..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Ffurfweddu dirprwy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Croeso i'r gwasanaeth ffurfweddu 'r dirprwy.\n"
-"\n"
-"Yma bydd modd i chi osod eich dirprwyon http a ftp gyda\n"
-"neu heb mewngofnod a chyfrinair\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Rhowch y wybodaethar gyfer dirprwyo http\n"
-"Gadewch hwn yn wag os nad ydych eisiau dirprwy http"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "porth"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Dylai'r URL ddechrau gyda \"http:\""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Dylai'r rhan porth fod yn rhifol"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Llanwxh y gwybodaeth dirprwy ftp\n"
-"Gadewch yn wag os nad ydych eisiau dirprwy ftp"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Dylai'r URL ddechrau gyda 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Rhowch mewngofnod a chyfrinair dirprwyol, os oes angen.\n"
-"Gadwech yn wag os nad ydych am gael mewngofnod a chyfrinair"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "mewngofnodi"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "cyfrinair"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "aildeipiwch y gyfrinair"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Nid yw'r cyfrineiriau'n cydweddi. Rhowch gynnig arall arni!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Methu ychwanegu rhaniad to_formatted_RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Methu ysgrifenu ffeil %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "methodd mkraid"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "methodd mkraid (efallai bod raidtools ar goll)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Dim digon o raniadau ar gyfer RAID lefel %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Cychwynnwch system sain ALSA (Pensaern�aeth Sain Linux Uwch)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron trefnydd gorchymyn cyfnodol"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Mae apmd yn cael ei ddefnyddio i fonitro statws y batri a \n"
-"mewngofnodi drwy syslog. Mae modd ei ddefnyddio i gau'r \n"
-"peiriant pan mae'r batri'n isel."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Mae'n rhedeg gorchmynion wedi eu trefnu gan y gorchymyn at ar amser wedi \n"
-"ei bennu pan oedd at yn rhedeg, gan rhedeg gorchmynion swp pan fydd \n"
-"cyfartaledd y llwyth yn ddigon isel."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Mae cron yn rhaglen safonnol yn UNIX sy'n rhedeg rhaglenni sydd wedi eu \n"
-"pennu gan y defnyddiwr ar adegau penodol. Mae vixie cron yn ychwanegu \n"
-"nifer o ychwanegiadau i'r UNIX cron sylfaenol, yn cynnwys gwell diogelwch \n"
-"a dewisiadau ffurfweddu mwy pwerus."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Mae GPM yn ychwanegu cefnogaeth ar gyfer llygoden i raglenni testun Linux \n"
-"megis, Midnight Commander. Mae hefyd yn caniat�u gweithrediadau torri a \n"
-"gludo consol llygoden, gan gynnwys cefnogaeth ar gyfer bryslenni yn y "
-"consol. "
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"Mae HardDrake yn rhedeg archwiliwr caledwedd, a gall yn �l \n"
-"eich dewis, ffurfweddu caledwedd newydd neu sydd wedi newid."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Mae Apache yn wasanaethwr y We Fyd Eang. Mae'n cael ei ddefnyddio "
-"iwasanaethu ffeiliau HTML a CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Mae daemon uwchwasanaethwr rhyngrwyd (inetd) yn cychwyn nifer\n"
-"o wasanaethau rhyngrwyd eraill, yn �l y galw. Mae'n gyfrifol am gychwyn\n"
-"nifer o wasanaethau, gan gynnwys telnet, ftp, rsh a rlogin. Mae analluogi \n"
-"inetd yn analluogi'r holl wasanaethau mae'n gyfrifol amdanynt."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Cychwyn hidlydd pecynnau ar gyfer cnewyllyn cyfres Linux 2.2 \n"
-"i greu mur gwarchod i amddiffyn eich peiriant rhag ymosodiadau \n"
-"o'r rhwydwaith."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Mae'r pecyn hwn yn llwytho'r map bysellfwrdd rydych wedi \n"
-"ei ddewis fel yn /etc/sysconfig/keyboard. Mae modd dewis \n"
-"hwn wrth ddefnyddio'r rhaglen wasanaethu kbdconfig. \n"
-"Dylech adael hwn wedi ei alluogi ar gyfer y rhanfwyaf o beiriannau."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Ailgreu awtomatic pennawd y cnewyllyn yn /boot ar\n"
-"gyfer /usr/include/linux{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Canfod a ffurfweddu awtomatic caledwedd wrth gychwyn y cyfrifiadur."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr "Bydd Linuxconf yn trefnu ar adegau i gyflawnu amrywiol"
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Mae lpd yn ddaemon argraffu sy'n angenrheidiol i lpr weithio\n"
-"Mae'n wasanaethwr sy'n cyflafareddu gwaith argraffu i\n"
-"argraffydd (ion)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Mae Gwasanaethwr Rhith Linux yn cael ei ddefnyddio i adeiladu \n"
-"gwasanaethwyr cyflym a chyraeddadwy."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"mae'r enwyd (BIND) yn Wasanaethwr Enw Parth (DNS) sy'n cael ei ddefnyddio i "
-"gydrannu enwau gwestai i'r cyfeiriadau IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Yn gosod a dadosod pob System Ffeil y Rhwydwaith (NFS), SMB\n"
-"(Rheolwr Rhwydwaith/Windows), a phwyntiau gosod NCP (NetWare) ."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Cychwyn/Gorffen pob rhyngwyneb rhwydwaith sydd wedi eu \n"
-"ffurfweddu i gychwyn wrth gychwyn y peiriant."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau ar draws "
-"rhwydweithiau TCP/IP.\n"
-"Mae'r gwasanaeth yn darparu  ffwythiannaeth gwasanaethwr NFS, sy;n cael ei "
-"ffurfweddu\n"
-"drwy'r ffeil  /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau \n"
-"ar draws rhwydweithiau TCP/IP. Mae'r gwasanaeth hwn \n"
-"yn darparu'r gallu i gloi ffeiliau NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Cychwyn clo allweddell numlock yn awtomatig yn consol \n"
-"ac XFree wrth gychwyn y peiriant."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Cynnal OKI 4w ac argraffyddion windows cyffelyb."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Mae cynhaliaeth PCMICA fel rheol ar gyfer cynnal pethau fel \n"
-"ethernet a modem mewn gliniadur. Ni fydd yn cychwyn heb ei \n"
-"ffurfweddu i wneud hynny, felly mae'n ddiogel ei gael ar beiriannau \n"
-"sydd ddim ei angen."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Mae'r mapiwr porth (portmapper) yn rheoli cysylltiadau RPC, \n"
-"sy'n cael eu defnyddio gan brotocolau fel NFS a NIS. Rhaid i wasanaethwr "
-"porthmap\n"
-"redeg ar beiriannau sy'n gweithredu fel gwasanaethwyr ar gyfer protocolau "
-"sy'n\n"
-"gwneud defnydd o fecanwaith RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Mae Postfix yn Asiant Cludo E-bost (MTA), sef rhaglen sy'nsymud e-bost o un "
-"peiriant i'r llall."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Bydd yn cadw ac adfer system pwll entropi ar gyfer cynhyrchu rhif \n"
-"hap o ansawdd uchel."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr "Dynodi dyfeisiadau"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Mae'r daemon llwybrydd yn caniat�u i'r tabl llwybrydd IP awtomatig \n"
-"ddiweddaru drwy gyfrwng y protocol RIP. Tra bo RIP'n cael ei \n"
-"ddefnyddio'n eang ar rhwydweithiau bach, mae angen protocolau \n"
-"llwybrydd mwy cymleth ar gyfer rhwydweithiwu cymleth."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Mae'r protocol rstat yn caniat�u i ddefnyddwyr rhwydwaith \n"
-"i adennill metric perfformaid unrhyw beiriant ar y rhwydwaith."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Mae protocol ruser yn caniat�u i ddefnyddwyr ar rwydwaith i adnabod\n"
-"pwy arall sydd wedi mewngofnodi ar beirianau eraill sy'n ymateb."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Mae'r protocol rwho'n caniat�u i ddefnyddwyr pell gael rhestr o'r \n"
-"holl ddefnyddwyr sydd wedi mewngofnodi ar beiriant sy'n rhedeg \n"
-"daemon rwho (yn debyg i fysedd)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Cychwyn y system sain ar eich peiriant"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog yw'r modd mae llawer o daemonau'n defnyddio i gofnodi \n"
-"negeseuon i ffeiliau cofnod systemau. mae'n syniad da io rhedeg \n"
-"syslog  bob tro."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Llwytho'r gyrrwyr ar gyfer eich dyfeisiau usb."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Yn cychwyn Gwasanaethwr Ffont  X (mae hyn yn orfodol i XFree i redeg).."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Dewiswch pa wasanaethau ddylai gael eu cychwyn yn awtomatig wrth gychwyn y "
-"cyfrifiadur"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Argraffu"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Rhyngrwyd"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Rhannu Ffeiliau"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "System"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Gweinyddu Pell"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Gwasanaethwr Cronfa Ddata"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Gwasanaethau: %d wedi eu cychwyn ar gyfer %d wedi eu cofrestri"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Gwasanaethau"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "rhedeg"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "ataliwyd"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Gwasanaethau a daemonau"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr "Dim gwybodaeth ychwanegol am y gwasanaeth hwn."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Cychwyn"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Cychwyn"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Aros"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Diolch am ddewis Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Croeso i fyd Cod Agored"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Mae llwyddiant MandrakeSoft yn seiliedig ar egwyddor Meddalwedd Rhydd. Mae "
-"eich system weithredu newydd yn ganlyniad gwaith cydweithredol ar ran y "
-"Gymuned Linux byd-eang"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Ymunwch � byd Meddalwedd Rhydd"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Dewch i adnabod y gymuned Cod Agored a dewch yn aelod. Dysgwch, addysgwch a "
-"chynorthwywch eraill drwy ymuno yn y grwpiau trafod niferus sydd i'w cael yn "
-"ein tudalennau gwe \"Cymuned\""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Y Rhygnrwyd a Negesu"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mae Mandrake Linux 8.2 yn cynnig y feddalwedd orau i gael mynediad i bopeth "
-"sydd gan y Rhyngrwyd i'w gynnig. Syrffiwch y we a gwyliwch animeddiadau gyda "
-"Mozilla a Konqueror, cyfnewidiwch e-bost a threfnu eich gwybodaeth gyda "
-"Evolution a Kmail, a llawr iawn rhagor. "
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Amlgyfrwng a Graffigau"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mae Mandrake Linux 8.2 yn caniat�u i chi wthio eich cyfrifiadur aml-gyfrwng "
-"i'r eithaf! Defnyddiwch y feddalwedd ddiweddaraf i chwarae ffeiliau "
-"cerddoriaeth a sain, golygu a threfnu eich delweddau a lluniau, gwylio "
-"teledu a fideo, a llawer iawn mwy"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Datblygiad"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 yw'r platfform datblygu gorau. Darganfyddwch rym grynhowr "
-"gcc GNU yn ogystal ag amgylcheddau datblygiadol Cod Agored gorau oll"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Canolfan Rheoli Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Canolfan Rheoli Mandrake Linux 8.2 yw'r lleoliad canolog ar gyfer llunio a "
-"ffurfio eich system Mandrake"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Rhyngwynebau defnyddwyr"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mae Mandrake Linux 8.2 yn darparu 11 amgylchedd penbwrdd graffigol a "
-"rheolwyr ffenestri gwahanol i ddewis ohonynt gan gynnwys Gnome 1.4, KDE "
-"2.2.2., Window Maker 0.8,  a'r gweddill"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Meddalwedd Gwasanethwyr"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Trowch eich peiriant i fod yn wasanaethwr pwerus gydag ychydig gliciau ar "
-"eich llygoden: gwasanaethwyr gwe, e-bost, mur gwarchod, llwybrydd, "
-"gwasanaethwr ffeil ac argraffu..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Gemau"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mae Mandrake Linux 8.2 yn darparu'r gemau Cod Agored gorau - arc�d,  antur, "
-"cardiau, chwaraeon, strategaeth..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Hoffech chi ddysgu Linux yn syml, yn gyflym, ac am ddim? Mae MandrakeSoft yn "
-"darparu hyfforddiant ar Linux, yn ogystal � ffordd i fesur eich cynnydd, yn "
-"MandrakeCampus - ein canolfan hyfforddiant ar-lein"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Mae cefnogaeth werthfawr gan Gymuned Linux, a chan MandrakeSoft i'w gael yn "
-"hwylus. Ac os ydych yn hen law ar Linux, cewch fod yn \"Arbenigwr\" a rhannu "
-"eich gwybodaeth ar ein safle cefnogi"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Ar gyfer eich holl brojectau TG, mae ein hymgynghorwyr ar gael i ddadansoddi "
-"eich anghenion a chynnig atebion unigryw i chi. Medrwch fanteisio ar brofiad "
-"eang MandrakeSoft fel cynhyrchydd Linux i ddarparu ateb TG gwell i'ch busnes."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Mae amrediad eang o ddarpariaeth Linux, yn ogystal � chynigion arbennig ar "
-"gynnyrch a 'difyrrwch', ar gael ar-lein yn ein e-siop"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Am ragor o wybodaeth ar Wasanaethau Profesiynol a chynigion masnachol  "
-"MandrakeSoft, gwelwch y dudalen we ganlynol:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Gosod pecynnau..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Methu darllen eich tabl rhaniadau. Mae'n rhy lwgr i mi :[\n"
-"Af ymlaen i flancio rhaniadau gwael"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Gwall!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Methu canfod ffeil delwedd angenrheidiol '%s'."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Ffurfweddwr Awto-Osod"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Rydych ar fin ffurfweddu disg meddal Gosod Awtomatig. Mae'r nodwedd hwn "
-"braidd yn beryglus a dylid ei ddefnyddio gyda gofal.\n"
-"\n"
-"Gyda'r hodwedd hwn, bydd modd ailchwarau'r gosodiad ar y cyfrifiadur, gan "
-"eich holi'n rhyngweithiol ar gyfer rhai cammau, er mwyn newid eu "
-"gwerthoedd.\n"
-"\n"
-"Ydych chi eisiau parhau?\n"
-"?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "FFurfweddiad Camau Awtomatig"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Dewiswch ar gyfer pob cam a fydd yn ail chwarae fel eich gosodiad, neu a "
-"fydd gyda llaw"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Croeso\n"
-"\n"
-"Mae paramedrau'r awto osod i'w cael yn yr adran ar y chwith"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Llongyfarchiadau!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Mae'r disg meddal wedi ei gynhyrchu'n llwyddiannus. \n"
-"Medrwch ail chwarae eich gosodiad."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Awto Gosod"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Ychwanegu eitem"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Tynnu'r eitem olaf"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      Adroddiad DrakBackup  \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                     Adroddiad Daemon DrakBackup \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                   Manylion Adroddiad DrakBackup \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "cyfanswm y cynnydd"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Ffeiliau system wrth gefn"
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Ffeiliau cadw wrth gefn y Disg Caled"
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Cynnydd Disg Caled wrth Gefn..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Cadw wrth gefn ffeiliau eraill..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"rhestr ffeil yrrwyd gan FTP: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) anhawster cysylltiad FTP: Nid oedd yn bosibl anfon eich ffeiliau wrth "
-"gefn drwy FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Gwall wrth anfon e-bost. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Dewis ffeiliau"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Dewiswch y ffeiliau neu gyfeiriaduron a chliciwch 'Ychwanegu'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Gwiriwch pob dewis sydd angen arnoch.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Mae'r dewisiadau hyn yn medru cadw wrth gefn ac adfer pob ffeil yn eich "
-"cyfeiriadur /etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Cadw wrth gefn ffeiliau System. ( cyfeiriadur /etc )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Cadw wrth gefn cynyddol (peidio disodli hen ffeiliau wrth gefn)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Peidio cynnwys ffeiliau hanfodol (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Gyda'e dewis hwn medrwch adfer unrhyw fersiwn\n"
-"o'ch cyfeiriadur /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Gwiriwch pob defnyddiwr rydych am eu cynnwys yn eich cadw wrth gefn."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Peidio cynnwys storfa'r porwr"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Defnyddio Cadw wrth Gefn Cynyddol (peidio disodli hen gadw wrth gefn)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Tynnu'r Dewis"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Defnyddwyr"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Defnyddiwch cysylltiad FTP i gadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Rhowch enw'r gwesteiwr neu'r IP"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Rhowch y cyfeiriadur i osod y cadw\n"
-"wrth gefn ar y gwesteiwr hwn."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Rhowch eich mewngofnod"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Rhowch eich cyfrinair"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Cofiwch y cyfrinair"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "Cysylltiad FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Cysylltiad Diogel"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Defnyddiwch yr CD/DVDROM i gadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Dewiswch eich gofod CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Gwiriwch os ydych yn defnyddio cyfrwng CDRW"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Gwiriwch os ydych am ddileu eich CDRW cyn"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Gwiriwch os ydych am gynnwys\n"
-" cychwyn gosod ar eich CD"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Rhowch enw dyfais eich Ysgrifennwr CD\n"
-"ex: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Defnyddiwch d�p i gadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Rhowch enw dyfais i'w ddefnyddio ar gyfer cadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Rhowch y maint mwyaf\n"
-"i'w ganiat�u ar gyfer Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Rhowch y cyfeiriadur i gadw iddo:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Defnyddiwch y cwota ar gyfer ffeiliau wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Rhwydwaith"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Disg Caled / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "bob awr"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "bob dydd"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "bob wythnos"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "bob mis"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Defnyddiwch ddaemon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Dewiswch faint o amser\n"
-"fydd rhwng pob cadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Dewiswch y cyfrwng ar\n"
-"gyfer cadw wrth gefn..."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Defnyddiwch y Disg Caled gyda'i ddaemon"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Defnyddiwch FTP gyda daemon"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"Gwnewch yn siwr bod daemon cron yn cael ei gynnwys yn eich gwasanaethau"
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Anfonwch adroddiad e-bost wedi pob cadw wrth gefn i :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Beth"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Lle"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Pryd"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Dewisiadau Eraill"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Ffurfweddiad Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Dewiswch i le rydych am gadw ffeiliau wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "ar Ddisg Caled"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "ar draws Rhwydwaith"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Dewiswch beth rydych am ei gadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "System cadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Defnyddwyr Cadw wrth Gwfn"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Dewis defnyddwyr gyda llaw"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Ffynhonell Cadw wrth Gefn:\n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Ffeiliau System: \n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Ffeiliau Defnyddiwr:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Ffeiliau Eraill: \n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"Cadw ar Ddisg caled ar lwybr: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Cadw ar FTP ar y gwesteiwr: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t enw defnyddiwr:%s\n"
-"\t\t ar lwybr: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"-Dewisiadau:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tPeidiwch cynnwys Ffeiliau System\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\t Bydd Cadw wrth gefn yn defnyddio tar a bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBydd Cadw wrth Gefn yn defnyddio tar a gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Daemon (%s) i gynnwys :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disg Caled.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Rhwydwaith drwy FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Rhwydwaith drwy SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Dim ffurfweddiad, cliciwch Dewin neu Uwch.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Rhestr o ddata i'w adfer:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Rhestr o ddata llwgr:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Dad-diciwch hwn neu ei dynnu'r tro nesaf."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Mae'r ffeiliau wrth gefn wedi eu llygru"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "         Mae eich dewis data wedi ei          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          Ei adfer yn Llwyddiannus ar %s     "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "           Adfer y Furfweddiad"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Iawn i adfer ffeiliau eraill"
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Rhestr defnyddwyr i'w adfer ( dim ond y diweddaraf yn �l y defnyddwyr, sy'n "
-"bwysig )"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Cadw'r ffeiliau system wrth gefn cyn:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "dewiswch y data i'w adfer"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Defnyddiwch y Ddisg Caled ar gyfer cadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Adfer o'r Ddisg Caled."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Rhowch y cyfeiriadur lle mae'r ffeiliau wrth gefn yn cael eu cadw"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Dewis cyfrwng arall i adfer ohono"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Cyfrwng Arall"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Adfer y system"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Adfer Defnyddwyr"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Adfer Arall"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "dewis llwybr arall i adfer ( yn lle / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Gwnewch cadw wrth gefn newydd cyn adfer ( ar gyfer cadw wrth gefn cynyddol "
-"yn unig )"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Tynnu cyfeiriaduron defnyddiwr cyn adfer."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Adfer pob cadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Adfer Dewisol"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Cymorth"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Cynt"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Gorffen"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Adeiladu Cadw wrth Gefn"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Adfer"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Nesaf"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Cr�wch gadw wrth gefn cyn ei adfer...\n"
-" neu gwiriwch fod eich llwybr i'w gadw'n gywir."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Gwall wrth ddefnyddio sendmail\n"
-"  chafodd eich adroddiad e-bost mo'i anfon\n"
-" Ffurfweddwch eich sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Rhestr Pecynnau i'w Gosod"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Gwall wrth anfon ffeil drwy FTP.\n"
-" Cywirwch eich ffurfweddiad FTP."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Dewiswch y data i'w adfer..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Dewiswch y cyfrwng ar gyfer cadw wrth gefn..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Dewiswch y data i'w gadw wrth gefn..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Ni chanfyddwyd y ffeil ffurfweddu \n"
-"cliciwch Dewin neu Uwch."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "O dan ddatblygiad...arhoswch."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Ffeiliau System Cadw wrth Gefn"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Cadw'r ffeiliau eraill wrth gefn"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Cyfanswm Cynydd"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "anfon ffeil drwy FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Anfon ffeiliau..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Rhestr data i'w gynnwys ar CDROM"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Rhowch gyflymder yr ysgrifennydd CD"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Rhowch enw dyfais eich Ysgrifennydd CD (ex: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Ticiwch os ydych eisiau cynnwys cychwyn gosod ar eich CD."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Cadwch wrth Gefn eich ffeiliau ffurfweddu"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Edrych ar Ffurfweddiad Cadw wrth Gefn"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Ffurfweddiad y Dewin"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Ffurfweddiad Uwch"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Cadw wrth Gefn Nawr"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"disgrifiad o'r dewisiadau:\n"
-"\n"
-"Yma mae Drakbackup yn caniat�u i chi newid:\n"
-"\n"
-" - Y modd cywasgu:\n"
-"   \n"
-"     Os wnewch chi glicio cywasgiad bzip2, byddwch yn \n"
-"     cywasgu eich data'n well na gzip (tua 2-10%).\n"
-"     Nid yw'r dewis wedi ei nodi drwy ragosodiad gan fod\n"
-"     angen mwy o amser ar y modd cywasgu hwn (tua 1000% yn fwy).\n"
-"\n"
-"- Y modd diweddaru:\n"
-"\n"
-"      Bydd y dewis hwn yn diweddaru eich caw wrth gefn, ond\n"
-"      nid yw'r dewis hwn wir yn ddefnyddiol gan fo angen dadgywasgu\n"
-"      eich cadw wrth gefn cyn bo modd i chi ei ddiweddaru.\n"
-"      \n"
-"- Y modd .backupignore\n"
-"     Fel gyda cvs, bydd Drakbackup yn anwybyddu pob cyfeiriad\n"
-"     yn ffeiliau .backupignore ym mhob cyfeiriadur.\n"
-"     ar wah�n i: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr "\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"disgrifiad o'r dewisiadau:\n"
-"\n"
-"- Ffeiliau system Cadw wrth Gefn\n"
-"         \n"
-"\tMae'r dewis hwn yn caniat�u i chi gadw wrth gefn eich\n"
-"\tcyfeiriadur /etc, sy'n cynnwys eich ffeiliau ffurfweddiad.\n"
-"\tByddwch ofalus wrth ei adfer i beidio trosysgrifo:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-"- Ffeiliau Defnyddiwr Cadw wrth Gefn\n"
-"\n"
-"\tMae'r dewis hwn yn caniat�u i chi ddewis pob defnyddiwr\n"
-"\trydych am gadw wrth gefn ar eu cyfer.\n"
-"\tI ddiogelu lle ar ddisg, argymhellir nad ydych yn cadw storfa'r\n"
-"\t porwr.\n"
-" \n"
-"- Cadw Ffeiliau Eraill wrth Gefn\n"
-"\n"
-"\tMae'r dewis hwn yn caniat�u i chi ychwanegu mwy\n"
-"\to ddata i'w gadw. Gyda'r cadw arall wrth gefn nid\n"
-"\tyw'n bosibl ar hyn o bryd i ddewis cadw wrth gefn\n"
-"\tcynyddol.\t\t\n"
-"\n"
-"Cadw wrth Gefn Cynyddol:\n"
-"\n"
-"\tCadw wrth Gefn Cynyddol yw'r dewis mwyaf pwerus.\n"
-"\tMae'r dewis hwn yn caniat�u i chi gadw eich data wrth\n"
-"\tgefn y tro cyntaf ac yna dim ond yr hyn sydd wedi newid.\n"
-"\tYna bydd modd i chi, yn ystod y cam o adfer, adfer eich\n"
-"\tdata o ddyddiad penodol.\n"
-"\tOs nad ydych wedi dewis hwn, bydd yr holl hen ffeiliau\n"
-"\twrth gefn yn cael eu dileu cyn pob cadw wrth gefn.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"disgrifad o adfer:\n"
-"\n"
-"Dim ond y ffeiliau mwyaf diweddar fydd yn cael eu defnyddio,\n"
-"oherwydd gyda candw wrth gefn cynyddol mae angen adfer\n"
-"pob cadw hyn yn unigol.\n"
-"\n"
-"Felly os nad ydych am adfer defnyddiwr dad-ddewiswch ei ddewisiadau.\n"
-"\n"
-"Ar wahan i hynny, dim ond un o rhain mae modd ei ddewis\n"
-"\n"
-"Cadw wrth Gefn Cynyddol:\n"
-"\n"
-"\tCadw wrth Gefn Cynyddol yw'r dewis mwyaf pwerus.\n"
-"\tMae'r dewis hwn yn caniat�u i chi gadw eich data wrth\n"
-"\tgefn y tro cyntaf ac yna dim ond yr hyn sydd wedi newid.\n"
-"\tYna bydd modd i chi, yn ystod y cam o adfer, adfer eich\n"
-"\tdata o ddyddiad penodol.\n"
-"\tOs nad ydych wedi dewis hwn, bydd yr holl hen ffeiliau\n"
-"\twrth gefn yn cael eu dileu cyn pob cadw wrth gefn.    \n"
-"\\n\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Hawlfraint(H 2001 MandrakeSoft gan DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"Mae'r rhaglen hon yn feddalwedd rhydd; medrwch ei ailddosbarthu\n"
-"a/neu ei newid o dan amodau Trwydded Gyhoeddus Gyffredinol GNU\n"
-"fel sydd wedi ei gyhoeddi gan y Free Software Foundation; un ai fersiwn\n"
-"2 neu (yn �l eich dewis) unrhyw fersiwn diweddarach.\n"
-"\n"
-" Mae'r rhaglen yn cael ei ddosbarthu yn y gobaith y bydd yn ddefnyddiol,\n"
-" ond HEB UNRHYW WARANT; heb hyd yn oed awgrym o warant o\n"
-" FASNACHEIDDRWYDD nag ADDASRWYDD AR GYFER PWRPAS\n"
-" PENODOL. Gweler Trwydded Gyhoeddus Gyffredinol GNU am fwy o\n"
-" wybodaeth.\n"
-"\n"
-" Dylech fod wedi derbyn copi o Drwydded Gyhoeddus Gyffredinol GNU\n"
-" gyda'r rhaglen; os nad, ysgrifennwch at:\n"
-" Free Software  Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n"
-"MA 02111-1307, USA"
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Disgrifiad:\n"
-"\n"
-" Mae Drakbackup yn cael ei ddefnyddio i cadw\n"
-" eich ffeiliau system wrth gefn.\n"
-" Yn ystod y ffurfweddiad medrwch ddewis:\n"
-"\t- Ffeiliau system,\n"
-"\t-Ffeiliau defnyddwyr,\n"
-"\t-Ffeiliau eraill.\n"
-"\tneu Eich holl system...ac Arall (megis Rhaniadau Windows)\n"
-"\n"
-"  Mae Drackbackup yn caniat�u i chi ddefnyddio:\n"
-"\t- Disg Caled.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (gyda awto gychwyn, achub ac awto osod.).\n"
-"\t- FTP.\n"
-"\t- Webdav.\n"
-"\t- T�p.\n"
-"\n"
-"  Mae Drakbackup yn caniat�u i chi adfer eich system i\n"
-"  gyfeiriadur o ddewis y defnyddiwr.\n"
-"\n"
-"  Yn rhagosodedig bydd ffeiliau wrth gefn yn cael eu cadw yn eich\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Ffeil ffurfweddiad:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Camau wrth adfer:\n"
-"  \n"
-"  Yn ystod yr adfer bydd Drakbackup yn tynnu\n"
-"  eich cyfeiriadur gwreiddiol a gwirio nad yw'r holl \n"
-"  ffeiliau wrth gefn wedi eu llygru. Argymhellir i chi \n"
-"  gadw wrth gefn cyn adfer.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"disgrifiad o'r dewisiadau:\n"
-"\n"
-"Byddwch ofalus wrth ddefnyddio cadw wrth gefn ftp, oherwydd\n"
-"dim ond ffeiliau wrth gefn sydd wedi eu hadeiladu sy'n cael eu\n"
-"hanfon at y gwasanaethwr.\n"
-"Felly, rhaid i chi adeiladu eich cadw wrth gefn ar eich disg caled\n"
-"cyn ei anfon i'r gwasanaethwr.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Anawsterau Adfer Ffeiliau wrth gefn\n"
-"\n"
-"Yn ystod yr adfer bydd Drakbackup yn gwirio eich holl\n"
-"ffeiliau wrth gefn cyn eu hadfer.\n"
-"Cyn adfer, bydd Drakbackup yn tynnu'r cyfeiriadur\n"
-"gwreiddiol, a byddwch yn colli eich holl ddata. Mae'n\n"
-"bwysig eich bod yn ofalus a pheidio newid y ffeiliau\n"
-"data wrth gefn gyda llaw.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Disgrifiad:\n"
-"\n"
-" Mae Drakbackup yn cael ei ddefnyddio i cadw\n"
-" eich ffeiliau system wrth gefn.\n"
-" Yn ystod y ffurfweddiad medrwch ddewis:\n"
-"\t- Ffeiliau system,\n"
-"\t- Ffeiliau defnyddwyr,\n"
-"\t- Ffeiliau eraill.\n"
-"\tneu Eich holl system...ac Arall (megis Rhaniadau Windows)\n"
-"\n"
-"  Mae Drackbackup yn caniat�u i chi ddefnyddio:\n"
-"\t- Disg Caled.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (gyda awto gychwyn, achub ac awto osod.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- T�p.\n"
-"\n"
-"  Mae Drakbackup yn caniat�u i chi adfer eich system i\n"
-"  gyfeiriadur o ddewis y defnyddiwr.\n"
-"\n"
-"  Yn rhagosodedig bydd ffeiliau wrth gefn yn cael eu cadw yn eich\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Ffeil ffurfweddiad:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Camau wrth Adfer:\n"
-"  \n"
-"  Yn ystod yr adfer bydd Drakbackup yn tynnu\n"
-"  eich cyfeiriadur gwreiddiol a gwirio nad yw'r holl \n"
-"  ffeiliau wrth gefn wedi eu llygru. Argymhellir i chi \n"
-"  gadw wrth gefn cyn adfer.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Mae gosod %s wedi methu. Digwyddodd y gwall canlynol:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Chwilio am ffontiau wedi eu gosod"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Tynnu ffontiau wedi eu gosod"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "pob ffont"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "heb ganfod ffontiau"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "gorffen"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "methu canfod unrhyw ffont yn eich rhaniad gosodedig"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Ailddewis y ffontiau cywir"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "methu cnafod unrhyw ffontiau.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Chwilio am ffontiau yn y rhestr gosod"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Cop�o ffontiau"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Gosod ffontiau True Type"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "arhoswch yn ystod ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Wedi gosod True Type"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Trosiad ffontiau"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "adeiladu math 1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "cyfeirio Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "trosi ffontiau ttf "
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "trosi ffontiau pfm"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Llethu ffeiliau dros dro"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Ail gychwyn XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Llethu ffeiliau Ffontiau"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "ail gychwyn xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Cyn gosod unrhyw ffontiau, gwnewch yn siwr bod gennych yr hawl i'w defnyddio "
-"a'u gosod ar eich system.\n"
-"\n"
-"- Medrwch osod y ffontiau yn y dull arferol. Mewn achosion prin, gall "
-"ffontiau ffug rewi eich Gwasanaethwr X"
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Mewnforio Ffontiau"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Estyn Ffontiau Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Dad osod Ffontiau"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Dewisiadau Uwch"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Rhestr Ffontiau"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Dewiswch y rhaglenni fydd yn cynnal ffontiau:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Argraffyddion Generig"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Dewiswch ffeil neu gyfeiriadur y ffont a chlicio 'Ychwanegu'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Gosod Rhestr"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "cliciwch yma os ydych yn siwr."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "yma os nad."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Dad ddewis Popeth"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Dewis Popeth"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Rhestr Tynnu"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Prawf Init"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Cop�o'r ffontiau ar eich system!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Gosod a throsi ffontiau"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Wedi'r Gosod"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Tynnu ffontiau oddi ar eich system!"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Wedi'r dad osod"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Rhannu Cysylltiad �'r Rhyngrwyd"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Mae Rhannu Cysylltiad �'r Rhyngrwyd wedi ei alluogi"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Mae gosodiad rhannu cysylltiad a'r Rhyngrwyd wedi ei gyflawni. \n"
-"Mae wedi ei alluogi. \n"
-"\n"
-"Beth hoffech ei wneud?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "dymunol"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "gwrthod"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ailffurfweddu"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Analluogi gwasanaethwyr..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Mae rhannu cysylltiad �'r Rhyngrwyd wedi ei analluogi."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Mae Rhannu Cysylltiad a'r Rhyngrwyd wedi ei analluogi"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Mae gosodiad rhannu cysylltiad a'r Rhyngrwyd wedi ei gyflawni. \n"
-"Mae wedi ei analluogi. \n"
-"\n"
-"Beth hoffech ei wneud?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "galluogi"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Galluogi gwasanaethwyr..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Mae rhannu cysylltiad �'r Rhyngrwyd wedi ei alluogi."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Rydych ar fin ffurfweddu eich cyfrifiadur i rannu ei cysylltiad Rhyngrwyd\n"
-"Gyda'r nodwedd hwn bydd cyfrifiaduron eraill ar eich rhwydwaith lleol yn "
-"medru rhannu cyswllt rhyngrwyd y\n"
-"cyfrifiadur hwn.\n"
-"\n"
-"Sylwer: bydd angen Addasydd Rhwydwaith un-pwrpas i greu Rhwydwaith Lleol "
-"(LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Rhyngwyneb %s (gan ddefnyddio modiwl %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Rhagwyneb %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nid oes addasydd rhwydwaith ar eich system!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nid oes addasydd rhwydwaith ethernet wedi ei ganfod ar eich system. Rhedwch "
-"yr offeryn ffurfweddu caledwedd."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Rhyngwyneb rhwydwaith"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Dim ond un addasydd rhwydwaith wedi ei ffurfweddu sydd ar eich system\n"
-"\n"
-"%s\n"
-"\n"
-"Rwyf ar fin gosod eich Rhwydwaith Lleol gyda'r addasydd hwnnw.."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Dewiswch ba addasyddion rhwydwaith fydd yn cael eu cysylltu �'ch Rhwydwaith "
-"Lleol."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Mae rhag wyneb y rhwydwaith wedi ei ffurfwedu eisoes"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Rhybudd, mae'r addaswr rhwydwaith (%s) wedi ei ffurfweddu eisoes.\n"
-"\n"
-"Ydych chi eisiau ail ffurfweddiad awtomatig?\n"
-"\n"
-"Medrwch ei wneud gyda llaw ond mae'n rhaid i chi wybod beth ydych yn ei "
-"wneud."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Ail ffurfweddiad awtomatig"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Dangoswch y ffurfweddiad rhag wyneb cyfredol"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Ffurfweddiad presennol '%s':\n"
-"\n"
-"Rhwydwaith: %s\n"
-"Cyfeiriad IP: %s\n"
-"Priodweddau IP: %s\n"
-"Gyrrwr: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Medraf gadw eich ffurfweddiad cyfredol a chymryd eich bod eisoes wedi gosod "
-"gwasanaethwr DHCP. Os felly, dilyswch fy mod wedi darllen y rhwydwaith "
-"dosbarth C rydych yn ei ddefnyddio fel eich rhwydwaith lleol, yn gywir. Ni "
-"fyddaf yn ei newid na chyffwrdd � ffurfweddiad eich gwasanaethwr DHCP.\n"
-"\n"
-"Neu, medraf ail ffurfweddu eich rhag wyneb ac (ail)ffurfweddi gwasanaethwr "
-"DHCP ar eich cyfer.\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Rhwydwaith Lleol Dosbarth C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "Gwasanaethwr DHCP IP (Hwn)"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Ail ffurfweddi rhag wyneb a gwasanaethwr DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Nid yw'r Rhwydwaith Leol yn terfynnu gyda '.0', tynnu allan."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Canfuwyd gwrthdaro posib yng nghyfeiriad LAN ffurfweddiad presennol %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Wedi canfod ffurfweddiad mur gwarchod!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Rhybudd! Mae ffurfweddiad mur gwarchod wedi ei ganfod. Efallai bydd angen "
-"atgyweirio gyda llaw ar �l y gosodiad."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Ffurfweddu..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Ffurfweddio sgriptiau, gosod meddalwedd, cychwyn gwasanaethwyr..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Anhawster wrth osod pecyn %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Mae popeth wedi ei ffurfweddu\n"
-"Gallwch rannu cysylltiad �'r Rhyngrwyd gyda chyfrifiaduron eraill ar eich "
-"Rhwydwaith Lleol gan ddefnyddio ffurfweddiad rhwydwaith awtomatig (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Mae'r gosodiad wedi ei gyflawnu, mae wedi ei anallluogi ar hyn o bryd."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Mae'r gosodiad wedi ei gyflawnu, mae wedi ei allluogi ar hyn o bryd."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Nid oes Rhannu Cysylltiad �'r Rhyngrwyd wedi eu ffurfweddu o'r blaen."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Ffurfweddiad rhannu cysylltiad �'r Rhyngrwyd"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Croeso i'r Gwasanaeth Rhannu Cysylltiad �'r Rhyngrwyd\n"
-"\n"
-"%s\n"
-"\n"
-"Cliciwch Ffurfweddu i gychwyn y dewin gosod."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Ffurfweddiad y rhwydwaith (%d addasydd)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Proffil:"
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Proffl dileu"
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Proffil i'w ddileu:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Proffil newydd..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Enw'r proffil i'w greu ( mae'r proffil newydd yn cael ei greu fel copi o'r "
-"un cyfredol):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Enw gwesteiwr:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Mynediad i'r Rhyngrwyd"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Math: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Mynedfa:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Rhyngwyneb:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Statws"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Arhoswch"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Ffurfweddu Mynediad i'r We..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Ffurfweddiad y Rhwydwaith Lleol"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Gyrrwr"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Rhyngwyneb"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Stad"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Ffurfweddu'r Rhwydwaith Lleol..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Cliciwch yma i gychwyn y dewin ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Dewin..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Gosod"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Arhoswch...Gosod y ffurfweddiad"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Wedi cysylltu"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Heb gysylltu"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Cysylltu..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Dadgysylltu..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Rhybudd, mae cysylltiad arall gyda'r rhyngrwyd wedi ei ganfod, efallai'n "
-"defnyddio eich rhwydwaith."
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nid oes gennych unrhyw rhagwynebau wedi\n"
-"eu ffurfweddio. Ffurfweddwch nhw'n gyntaf\n"
-"drwy glicio ar 'Ffurfweddu'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Ffurfweddiad Rhwydwaith Lleol (LAN)"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Addasydd %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocol Cychwyn"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Cychwyn y peiriant"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Cleient DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "cychwyn nawr"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "dad weithredu nawr"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Nid yw'r rhag wyneb hwn wedi ei ffurfweddu eto.\n"
-"Cychwynnwch y dewin ffurfweddi yn y brif ffenestr."
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nid oes gennych cysylltiad �'r rhyngrwyd.\n"
-"Cr�wch un drwy glicio ar 'Ffurfweddu'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Ffurfweddiad cysylltiad �'r Rhyngrwyd"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Ffurfweddu Cysylltiad �'r Rhyngrwyd"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Math o gyswllt:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Paramedrau"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Mynedfa"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Cerdyn Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Cleient DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Gosod y lefel diogelwch"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Canolfan Rheoli"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Dewiswch yr offeryn rydych am ei ddefnyddio"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canada (cabl)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "UDA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "UDA (cabl)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "UDA (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Tseina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Siapan (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Siapan (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Dwyrain Ewrop"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Iwerddon"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Gorllewin Ewrop"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Awstralia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Zeland Newydd"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "De Affrica"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Yr Ariannin"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Rhowch eich safon teledu a gwlad"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Safon Teledu:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Ardal:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Wrthi'n sganio am sianeli Teledu ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Sganio am Sianel Teledu"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "defnydd: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Dewiswch gynllun alweddell"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Ydych chi eisiau i'r Backspace ddychwelyd Dileu yny consol?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Newid CD-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Rhowch y CD Gosod yn eich gyrwr a chlicio Iawn ar �l gorffen\n"
-"Os nad yw gennych, cliciwch Dileu i osgoi diweddaru."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Methu cychwyn diweddariad byw!!! \n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Mae'r newid wedi ei gyflawni, ond i fod yn effeithiol mae'n rhaid i chi "
-"allgofnodi"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Dangos ar y diwrnod penodol yn unig"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Ffeil/_Newydd"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Ffeil/_Agor"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/File/_Cawd"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/File/Cawd _fel"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Ffeil/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Dewisiadau"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Dewisiadau/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Cymorth"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Cymorth/_Ynghylch..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Defnyddiwr"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Negeseuon"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Esboniadau Offer Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "chwilio"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Offeryn i fonitro eich cofnodion"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Gosodiadau"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "cydweddu"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "ond heb fod yn cydweddu"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Dewis ffeil"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Calendr"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Cynnwys y ffeil"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Rhybudd E-bost/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "arhoswch, dosbarthu ffeil: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Rhybudd ffurfweddiad E-bost/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Croeso i'r gwasanaeth ffurfweddu e-bost/SMS\n"
-"\n"
-"Yma bydd modd i chi osod y system rhybuddio.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "gosodiad gwasanaeth"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Byddwch yn derbyn rhybudd os na fydd un o'r gwasanaethu hyn yn rhedeg"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "gosodiad llwyth"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Byddwch yn derbyn rhybudd os yw'r llwyth yn uwch na'r gwerth hwn"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "ffurfweddiad rhybudd"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Ffurfweddiwch y ffordd mae'r system yn eich rhybuddio"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Cadw fel..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Dewiswch math eich llygoden"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "neb ganfod serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Efelychu'r trydydd botwm?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "Wedi canfod %s ar %s, ei ffurfweddi?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Dewiswch sganiwr"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Nid yw sganiwr %s yn cael ei gynnal"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Dyfais cychwyn"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Rhaid i sganiwr %s gael ei ffurfweddu gan printerdrake.\n"
-"Medrwch gychwyn printerdrake o adran Galedwedd Canolfan Rheoli Mandrake"
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Ffurfweddiad Mur Gwarchod"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Ffurfweddiad Mur Gwarchod"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Mur Gwarchod\n"
-"\n"
-"Rydych eisoes wedi gosod mur gwarchod\n"
-"Cliciwch Ffurfweddu i newid neu dynnu'r mur gwarchod"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Mur gwarchod\n"
-"\n"
-"Cliciwch Ffurfweddu i osod mur gwarchod safonnol"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Dewis eich iaith"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Dewis dosbarth gosod"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Canfod disg caled"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Ffurfweddu llygoden"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Dewis eich allweddell"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Diogelwch"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "System ffeil gosod"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Fformatio rhaniadau"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Dewis pecynnau i'w gosod"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "System osod"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Ychwanegu defnyddiwr"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Ffurfweddu rhwydwaith"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Ffurfweddu gwasanaethau"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Gosod llwythwr cychwyn"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Creu disg cychwyn"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Ffurfweddu X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Diweddariadau system gosod"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Gadael gosod"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"ffurfweddiadur tinyfirewall\n"
-"\n"
-"Mae hwn yn ffurfweddu mur gwarchod personol ar gyfer y peiriant \n"
-"Mandrake Linux hwn. Am fur gwarchod pwrpasol pwerus, \n"
-"edrychwch ddosbarthiad arbennigol MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Byddwn nawr yn gofyn cwestiynnau am wasanaethau'r hoffech eu \n"
-"caniat�u i'r Rhyngrwyd gysylltu � hwy. Meddyliwch yn ofalus am y \n"
-"cwestiynnau, mae diogelwch eich cyfrifiadur yn bwysig.\n"
-"\n"
-"Os nad ydych yn defnyddio un o'r gwasanaethau hyn \n"
-"gwarchodwch ef. Mae modd newid y ffurfweddiad pryd \n"
-"bynnag hoffech chi drwy ail redeg y rhaglen."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"A ydych yn rhedeg gwasanaethwr gwe ar y peiriant hwn i'r holl\n"
-"Ryngrwyd ei weld? Os ydych yn rhedeg gwasanaethwr gwe\n"
-"sydd ar gyfer y peiriant hwn yn unig, yna atebwch NA.\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"A ydych yn rhedeg gwasanaethwr enw ar y peiriant hwn? Os nad ydych wedi\n"
-"gosod un i rhannu gwybodaeth IP a parth i'r holl Ryngrwyd, yna atebwch NA.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Ydych chi am ganiat�u cysylltiadau Secure Shell (ssh)? Mewngofnod\n"
-"posib i gymryd lle telnet yw hwn. Os ydych yn defnyddio telnet, dylech wir \n"
-"newid i ssh. Nid yw telnet wedi ei amgryptio - gall rhai ymosodwyr ddwyn\n"
-"eich cyfrinair. Mae ssh wedi ei amgryptio ac nid yw'n caniat�u i eraill "
-"wrando."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"A ydych am ganiat�u cysylltiadau telnet i mewn?\n"
-"Mae hyn yn erchyll o aniogel, fel soniwyd yn y sgrin diwethaf. Rydym\n"
-" yn argymell yn gryf eich bod yn ateb Na yn fan hyn a defnyddio ssh\n"
-"yn lle telnet\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"A ydych yn rhedeg gwasanaethwr FTP sydd angen cysylltiad �'r Rhyngrwyd?\n"
-"Os ydych rydym yn argymell yn gryf eich bod yn ei ddefnyddio ar gyfer\n"
-"trosglwyddiadau anhysbys yn unig. Gall unrhyw gyfrinair sy'n cael ei anfon\n"
-"drwy FTP gael ei ddwyn, gan nad yw FTP'n defnyddio amgryptiad ar gyfer\n"
-"trosglwyddo cyfrineiriau\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"A ydych yn rhedeg gwasanaethwr e-bost? Os ydych yn\n"
-"anfon eich negeseuon drwy pine, mutt neu unrhyw gleient testun arall\n"
-"yna mae'n debyg eich bod. Oni bai am hynny, dylech ddiogelu hwn gyda\n"
-"mur gwarchod\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"A ydych yn rhedeg gwasanaethwr POP neu IMAP? Byddai\n"
-"hyn yn cael ei ddefnyddio fel gwestai ar gyfer cyfrifon e-bost\n"
-"nad ydynt yn gysylltiedig a'r we, drwy'r peiriant hwn\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Mae'n ymddangos eich bod yn rhedeg cnewyllyn 2.2 Os\n"
-"yw eich rhwydwaith wedi ei greu'n awtomatig gan gyfrifiadur\n"
-"yn eich cartref neu swyddfa (neilltuad dynamigol) rhaid caniat�u\n"
-"ar gyfer hyn. Ai dyma sut mae hi?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Ydi eich cyfrifiadur yn cydweddi amser gyda cyfrifiadur arall?\n"
-"Fel rheol, mae hyn yn cael ei ddefnyddio gan gyrff Unix/Linux\n"
-"cymhedrol-mawr i gydweddu amser ar gyfer mewngofnodi ag ati.\n"
-"Os nad ydych yn rhan o swyddfa fwy ac heb glywed am hyn, mwy\n"
-"na thebych, nid ydych."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Mae furfweddiad wedi ei gwblhau. Gawn ni ysgrifennu'r newidiadau hyn i  "
-"ddisg?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Methu agor %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Methu agor %s ar gyfer ysgrifennu: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Nid wyf angen DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Rwyf eisiau DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Nid wyf angen NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Rwyf eisiau NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Peidio Cadw"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Cadw a Gadael"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Dewin Ffurfweddu'r Mur Cadarn"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Na ((rhowch hwn tu n�l i fur cadarn rhag y rhyngrwyd)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Iawn (caniatewch hwn drwy'r mur cadarn)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Arhoswch,... Gwirio'r pecynnau sydd wedi eu gosod"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Wedi methu gosod y pecynnau angenrheidiol: %s a Bastille.\n"
-" Ceisiwch eu gosod gyda llaw."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Gwe/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Cyfrifiadur Rhwydwaith (cleient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-"Gwasanaethwr NFS, gwasanaethwr SMB, gwasanaethwr dirprwyol, gwasanaethwr ssh"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Swyddfa"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Man Gwaith Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Offer ar gyfer eich Palm PiloT neu eich Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Man Gwaith"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Mur Gwarchod/Llwybrydd"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Enw Parth a gwasanaethwr Gwybodaeth Rhwydwaith"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Rhaglenni swyddfa: prosesydd geiriau (Kword, abiword, taenlenni (kspread, "
-"gnumeric), darllennydd pdf, ag ati"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Offer Sain: mp3 neu chwarewyr midi, cymysgwyr, ag ati"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Llyfrau a Howto's ar Linux a Meddalwedd Rhydd"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Man Gwaith KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ag ati"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Aml-gyfrwng - Fideo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Casgliad o offer ar gyfer e-bost, newyddion, y we, trosglwyddo ffeiliau, a "
-"sgwrsio"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Cronfa Ddata"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Gwasanaethwr cronfa data PostgreSQL neu MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Offer i wneud ffurfweddu'ch cyfrifiadur yn haws"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Aml-gyfrwng - Sain"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Gwaasanaethau"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dogfennaeth"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Offer y Consol"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Gwasanaethwr e-bost Postfix, gwasanaethwr newyddion Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Man Rhyngrwyd"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Man Aml-gyfrwng"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Ffurfweddiad"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Rhagor o Ben Bwrdd Graffig (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"KDE - Amgylchedd Penbwrdd K, yr amgylchedd graffig sylfaenol gyda chasgliad "
-"o offer"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Amgylchedd Graffig"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Offer i greu a llosgi CDau"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Gweithfan Swyddfa"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Gwasanaethwr"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ag ati"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Rhaglenni graffeg megis The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Llyfrgelloedd datblygiadol C a C++, rhaglenni a ffeiliau cynnwys"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Gwasanaethwr Cyfrifiadur Rhwydwaith"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-bost/Offer Grwp/Newyddion"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Man chwarae"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Chwarewyr a golygyddion fideo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Aml-gyfrwng - Graffig"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Rhaglenni difyrrwch: arc�d, byrddau, strategaeth, ag ati"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Casgliad o offer i ddarllen ac anfon e-bost a newyddion (pine, mutt, tin..) "
-"ac i bori'r We"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archifio, efelychwyr, monitro"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Cyllid Personol"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Amgylchedd graffig gyda chasgliad o raglenni ac offer penbwrdd hawdd eu "
-"defnyddio."
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clientiaid ar gyfer protocolau amrywiol yn cynnwys ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Porth i'r rhyngrwyd"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Chwarae sain a fideo/rhaglenni golygu"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Pen Desg Graffigol Eraill"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Golygyddion, cregyn, offer ffeilio, terfynellau"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Rhaglenni i reoli eich cyllid, megis gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Rheoli Gwybodaeth Bersonol"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Aml-gyfrwng - Llosgi CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Gweithfan Gwyddonol"
-
-#~ msgid "About"
-#~ msgstr "Allwedd amgryptio (eto)"
-
-#~ msgid "             Help           "
-#~ msgstr "             Cymorth"
-
-#~ msgid ""
-#~ "XawTV isn't installed ...\n"
-#~ "You should install it.\n"
-#~ " Just type \"urpmi xawtv\""
-#~ msgstr ""
-#~ "Nid yw XawTV wedi ei osod ...\n"
-#~ "Dylech ei osod.\n"
-#~ " Teipiwch \"urpmi xawtv\""
diff --git a/perl-install/share/po/da.po b/perl-install/share/po/da.po
deleted file mode 100644
index 6edcd2ac1..000000000
--- a/perl-install/share/po/da.po
+++ /dev/null
@@ -1,12282 +0,0 @@
-# Danish translation of/Dansk overs�ttelse af
-# Mandrake Linux DrakX.
-# Copyright (C) 1999-2001 MandrakeSoft
-#
-# In order of activity:
-# 1, Keld Simonsen <keld@dkuug.dk>, 2000-2002
-# 2, Jacob Nordfalk <nordfalk@mobilixnet.dk>, 2001-2002
-# 3, Troels Liebe Bentsen <tlb@iname.com>, 1999-2000
-# 4, Nikolaj Berg Amondsen <mr_nba@get2net.dk>, 2000
-# 5, Jacob Sparre Andersen, <sparre@sslug.dk>, 2000
-# 6, Kenneth Christiansen, <kenneth@ripen.dk>, 2000
-# 7, Jens Burkal <jburkal@get2net.dk>, 1999
-# 8, Mads Stenhuus Hansen <msh@com.dtu.dk>, 1999
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-13 13:04+0100\n"
-"Last-Translator: Keld Simonsen <keld@dkuug.dk>\n"
-"Language-Team: Danish <dansk@klid.dk>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfigur�r alle sk�rme uafh�ngigt"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Brug Xinerama-udvidelse"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigur�r kun kort \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Flersk�rms-konfiguration"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Dit system underst�tter konfiguration af flere sk�rme\n"
-"Hvad vil du g�re?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafikkort"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "V�lg et grafikkort"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "V�lg en X-server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X-server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "V�lg en X-driver"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X-driver"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Hvilken konfiguration af XFree �nsker du?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dit kort kan have 3D acceleration, men kun med XFree %s.\n"
-"Dit kort er underst�ttet af XFree %s som kan have bedre underst�ttelse i 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Dit kort kan have 3D hardware accelerations-underst�ttelse med XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s med 3D hardware acceleration"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Dit kort kan have 3D acceleration underst�ttelse, men kun med XFree %s,\n"
-"VIGTIGT: Dette er eksperimentelt og kan f� din maskine til at l�se eller g� "
-"ned."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s med EKSPERMENTAL 3d hardware acceleration"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dit kort kan have 3D acceleration underst�ttelse, men kun med XFree %s.\n"
-"VIGTIGT: Dette er eksperimentelt og kan f� din maskine til at l�se eller g� "
-"ned.\n"
-"Dit kort er underst�ttet af XFree %s som kan have bedre underst�ttelse i 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installations-sk�rmdriver)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfiguration"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "V�lg hukommelsesm�ngde for dit grafikkort"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "V�lg server-indstillinger"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "V�lg en sk�rmtype"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Sk�rm"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"De to kritiske parametre er den lodrette frekvens, som angiver hvor mange "
-"gange (per sekund) hele sk�rmbilledet bliver genopfrisket, og (vigtigst af "
-"alt) den vandrette frekvens, som angiver antallet af vandrette linier der "
-"kan tegnes p� sk�rmen hvert sekund.\n"
-"\n"
-"Det er MEGET VIGTIGT at du ikke angiver en sk�rmtype med "
-"opdateringsfrekvenser, der er st�rre end din sk�rms form�en: du risikerer at "
-"�del�gge din sk�rm.\n"
-"Hvis du er i tvivl, b�r du v�lge en ops�tning, som du med SIKKERHED ved\n"
-"at din sk�rm kan klare."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Vandret opdateringsfrekvens"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Lodret opdateringsfrekvens"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Sk�rm ikke konfigureret"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafikkort er endnu ikke konfigureret"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Opl�sninger ikke valgt endnu"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "�nsker du at afpr�ve konfigurationen?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Advarsel: afpr�vning af dette grafikkort kan f� din maskine til at l�se"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test konfigurationen"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"pr�v at �ndre nogle parametre"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "En fejl opstod:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Vender tilbage om %d sekunder"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Er dette den korrekte indstilling?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "En fejl opstod, pr�v at �ndre nogle parametre"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Opl�sning"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "V�lg opl�sning og farvedybde"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikkort: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86-server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Mere"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "O.k."
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspert-udgave"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Vis alle"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Opl�sninger"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatur-type: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muse-type: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muse-enhed: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Sk�rm: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sk�rms vandrette frekvens: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Sk�rms lodrette frekvens: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafikkort: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafikkort identifikation: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafik-hukommelse: %s kb\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farvedybde: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Opl�sninger %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86-server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 driver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Forbereder konfiguration af X"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Hvad �nsker du at g�re?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Skift sk�rmtype"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Skift grafikkort"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Foretag �ndringer i server-indstillinger"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Skift opl�sning"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Vis information"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Test igen"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Afslut"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Behold �ndringer?\n"
-"Nuv�rende konfiguration er:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Start X ved systemstart"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Jeg kan s�tte din maskine op til automatisk at starte X ved\n"
-"opstart. �nsker du at starte X hver gang du genstarter?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Log ind i %s igen for at aktivere �ndringerne"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Log ud og tryk herefter p� Ctrl-Alt-Bak"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 farver (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tusinde farver (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tusinde farver (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millioner (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milliarder farver (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 Mb eller mere"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard-VGA, 640x480 ved 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super-VGA, 800x600 ved 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibel, 1024x768 ved 87 Hz interlaced (ikke 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ved 87 Hz interlaced, 800x600 ved 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Udvidet Super-VGA, 800x600 ved 60 Hz, 640x480 ved 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 ved 60 Hz, 800x600 ved 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "H�jfrekvens SVGA, 1024x768 ved 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekvens, som kan klare 1280x1024 ved 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekvens, som kan klare 1280x1024 ved 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekvens, som kan klare 1280x1024 ved 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Sk�rm, som kan klare 1600x1200 ved 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Sk�rm, som kan klare 1600x1200 ved 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "F�rste sektor af opstartspartition"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "F�rste sektor p� disken (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO-installering"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Hvor vil du placere opstartsprogrammet?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub-installering"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO med tekstmenu"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO med grafisk menu"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Start fra DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Systemopstarterens hovedindstillinger"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Systemopstarter der skal bruges"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Systemopstarterens installation"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Opstartsenhed"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (virker ikke med gamle BIOS'er)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Videoindstilling"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Ventetid f�r opstart af forvalgt styresystem"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Adgangskode"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Adgangskode (igen)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Begr�ns kommandolinie-indstillinger"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "begr�ns"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Rens /tmp ved hver systemopstart"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Pr�cis RAM-m�ngde, hvis p�kr�vet (fandt %d Mb)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Aktiv�r multiprofiler"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Angiv RAM-st�rrelse i Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Indstillingen ``Begr�ns kommandolinie-indstillinger'' er intet v�rd uden\n"
-"en adgangskode"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Pr�v igen"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Adgangskoderne stemmer ikke overens"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Init-besked"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "�ben firmwareforsinkelse"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Ventetid f�r kerneopstart"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Skal det v�re muligt at starte fra CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Skal det v�re muligt at starte fra OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Forvalgt styresystem?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Du besluttede at installere opstartsindl�seren p� en partition.\n"
-"Dette indikerer at du allerede har en opstartsindl�ser p� disken som du "
-"starter op fra (fx System Commander).\n"
-"\n"
-"Hvilket drev starter du op fra?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Her er f�lgende typer indgange.\n"
-"Du kan tilf�je flere eller �ndre de eksisterende."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Tilf�j"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "F�rdig"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "�ndr"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Hvilken type �nsker du at tilf�je"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Andet styresystem (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Andet styresystem (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Andet styresystem (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Billede"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Rod"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Vedh�ft"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "L�s-skriv"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Usikker"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "M�rkat"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Forvalgt"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-st�rrelse"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Ingen video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Fjern indgang"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Tom m�rkat er ikke tilladt"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Du skal angive en kerne-fil"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Du skal angive en root-partition"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Denne m�rkat er allerede brugt"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fandt %s %s gr�nsesnit"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Har du �n til?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Har du nogen %s gr�nsesnit?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nej"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Se info for maskinel"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installerer driver for %s kort %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hvilken %s driver skal jeg pr�ve?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"I nogen tilf�lde beh�ver %s driveren at have ekstra information for at "
-"virke\n"
-"ordentligt, selv om den normalt virker fint uden. �nsker du at angive "
-"ekstra\n"
-"parametre for den eller tillade driveren at sondere din maskine for\n"
-"den information den beh�ver? Af og til vil sondering stoppe maskinen, men "
-"burde\n"
-"ikke for�rsage nogen skader."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatisk sondering"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Specific�r parametre"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Du kan nu angive parametre til modul %s.\n"
-"Bem�rk at alle adresser b�r indtastes med foranstillet 0x, fx '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Du kan nu s�tte parametre til modulet %s.\n"
-"Parametrene er i formatet ``navn=v�rdi navn2=v�rdi2 ...''.\n"
-"F.eks., ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modulindstillinger:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Indl�sning af modul %s mislykkedes.\n"
-"�nsker du at pr�ve igen med andre parametre?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "adgang til X-programmer"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "adgang til rpm-v�rkt�jer"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "tillad \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "adgang til administrative filer"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(har allerede tilf�jet %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Adgangskoden er for simpel"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Indtast et brugernavn"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Brugernavnet m� kun indeholde sm� bogstaver, tal, `-' og `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Dette brugernavn eksisterer allerede"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Tilf�j bruger"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Indtast en bruger\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Accept�r bruger"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Rigtige navn"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Brugernavn"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Skal"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Jeg kan s�tte din maskine op til automatisk at logge en bestemt bruger p�.\n"
-"�nsker du at bruge denne finesse?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "V�lg den forvalgte bruger:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "V�lg den vinduesh�ndtering du �nsker at benytte:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "V�lg det sprog, der skal bruges."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Du kan v�lge andre sprog der vil v�re tilg�ngelige efter installationen"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Alt"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Tillad alle brugere"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Tilpasset"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Ingen fildeling"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Pakken %s skal v�re installeret. �nsker du at installere den?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Du kan eksportere med NFS eller Samba. Hvilken vil du bruge"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Kr�vet pakke %s mangler"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"�nsker du at tillade brugere at eksportere nogle kataloger i deres "
-"hjemmekatalog?\n"
-"Tilladelse af dette vil s�tte brugere i stand til simpelthen at klikke p� "
-"'Fildeling' i konqueror og nautilus.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Annull�r"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Start userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Deling per bruger bruger gruppen 'fileshare'. \n"
-"Du kan bruge userdrake til at tilf�je en bruger til denne gruppe."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Velkommen til Crackere"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Ringe"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "H�j"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "H�jere"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Dette niveau skal bruges med omtanke. Det g�r dit system nemmere at bruge, "
-"men er meget s�rbart: det m� ikke bruges til en maskine der er i et netv�rk "
-"eller har forbindelse til Internettet. Der er ikke nogen kontrol af "
-"adgangskoder."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Kontrol af adgangskode er nu aktiveret, men brug som netv�rksmaskine er "
-"stadig ikke anbefalet."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Dette er standard sikkerheds-anbefalingen for en maskine\n"
-" med forbindelse til Internettet som klient. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Der er allerede nogle begr�nsninger, og flere automatiske kontroller bliver "
-"k�rt hver nat."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Med dette sikkerhedsniveau kan brug som server komme p� tale.\n"
-"Sikkerheden er nu h�j nok til at systemet kan bruges som server som tillader "
-"forbindelser fra mange klienter. Bem�rk: hvis din maskine kun er en klient "
-"p� internettet b�r du hellere v�lge et lavere niveau."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Baseret p� det foreg�ende niveau, men systemet er nu helt lukket.\n"
-"Sikkerhedsfaciliteterne er nu p� deres h�jeste niveau."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "V�lg sikkerhedniveau"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Sikkerhedsniveau"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Brug libsafe for servere"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Et bibliotek som beskytter mod angreb via bufferoverl�b og formatstrenge."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Velkommen til %s styresystems-v�lgeren!\n"
-"\n"
-"V�lg et styresystem i den ovenst�ende liste eller\n"
-"vent %d sekunder for at starte standard.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Velkommen til GRUB styresystemsv�lgeren!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Brug tasterne %c og %c til at v�lge mellem mulighederne."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Tryk 'enter' for at starte det valgte OS, 'e' for at redigere"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "kommandoerne f�r opstart, eller 'c' for en kommandolinie."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Den fremh�vede mulighed vil blive startet automatisk om %d sekunder."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "Ikke nok plads i /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Skrivebord"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start-menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Du kan ikke installere opstartsindl�seren p� en %s-partition\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "endnu er ingen hj�lp implementeret.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguration af opstartsudseende"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fil"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fil/_Afslut"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<kontrol>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Katergoriserende oversigt i ny stil"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Oversigt i ny stil"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Traditionel oversigt"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Traditionel Gtk+-oversigt"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Start Aurora ved opstart"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modus"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modus"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Du bruger for �jeblikket % som opstartsh�ndterer.\n"
-"Klik p� Konfigur�r for at starte ops�tnings-vejlederen."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigur�r"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Systemmodus"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Start X-vinduessystemet efter opstart"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nej, jeg �nsker ikke automatisk login"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, jeg �nsker automatisk login med denne (bruger, skrivebord)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kan ikke l�se /etc/inittab: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "Gb"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "Kb"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mb"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "Tb"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutter"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minut"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekunder"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Kan ikke lave �jebliksbilleder f�r partitionering"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "�jebliksbilleder vil v�re tilg�ngelige efter installation i %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Frankrig"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgien"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Tjekkiet"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Tyskland"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Gr�kenland"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norge"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Sverige"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Holland"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italien"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "�strig"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "U.S.A."
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Lav gerne en sikkerhedkopi af dine data f�rst"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "L�s omhyggeligt!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Hvis du planl�gger at bruge Yaboot, skal du huske at efterlade fri plads p�\n"
-"begyndelsen af disken (2048 sektorer skulle v�re nok)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Fejl"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Vejleder"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "V�lg handling"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Du har �n stor FAT partition.\n"
-"(normalt brugt af Microsoft Dos/Windows).\n"
-"Jeg anbefaler, at du �ndrer st�rrelsen p� partitionen\n"
-"(klik p� den, og klik herefter p� \"St�rrelses�ndring\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Klik p� en partition"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detaljer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journaliserende FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Tom"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Andet"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Filsystems-typer:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Opret"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Type"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Benyt ``%s'' i stedet"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Slet"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Benyt ``Afmont�r'' f�rst"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter type-�ndring af partition %s vil alle data p� denne partition g� tabt"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "V�lg en partition"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "V�lg en ny partition"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Afslut"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Normal -> Ekspert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Ekspert -> Normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Fortryd"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Forts�t alligevel?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Afslut uden at gemme"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Afslut uden at skrive partitionstabellen?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "�nsker du at gemme /etc/fstab-�ndringerne?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Allok�r automatisk"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Slet alt"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Drev-information"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Alle prim�re partitioner er brugt"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Kan ikke tilf�je flere partitioner"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"For at du kan f� flere partitioner, skal du slette �n, s� der kan oprettes "
-"en udvidet partition"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Gem partitionstabel"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Genskaber partitionstabel"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Redder partitionstabel"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Genindl�s partitionstabel"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automontering af flytbare medier"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "V�lg fil"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Kopien af partitionstabellen har ikke samme st�rrelse\n"
-"Forts�t alligevel?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Advarsel"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Inds�t en diskette i diskettedrevet\n"
-"Alle data p� disketten vil blive slettet"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Fors�ger at redde partitionstabellen"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detaljeret information"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Monteringssti"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Valg"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "St�rrelses�ndring"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Flyt"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Format�r"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Mont�r"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Tilf�j til RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Tilf�j til LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Afmont�r"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Fjern fra RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Fjern fra LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "�ndr RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Loopback anvendelse"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Opret en ny partition"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Startsektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "St�rrelse i Mb: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Filsystemstype: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Monteringssti: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Pr�ference: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Fjern loopback-filen?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Skift partitionstype"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Hvilket filsystem �nsker du at bruge?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Skifter fra ext2 til ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Hvor �nsker du at montere loopback-fil %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hvor �nsker du at montere partitionen %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan ikke fjerne monteringssti, da denne partition bliver brugt til "
-"loopback.\n"
-"Fjern loopback f�rst"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Udregner FAT-filsystemets gr�nser"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "�ndrer st�rrelsen"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "St�rrelsen p� denne partition kan ikke �ndres"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Det b�r laves en backup af alle data p� denne partition"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter �ndring af st�rrelsen af partition %s vil alle data p� denne partition "
-"g� tabt"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "V�lg den nye st�rrelse"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Ny st�rrelse i Mb: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Hvilken disk �nsker du at flytte den til?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Hvilken sektor �nsker du at flytte den til?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Flytter"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Flytter partition..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "V�lg en eksisterende RAID som skal udvides"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "ny"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "V�lg en eksisterende LVM som skal udvides"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM-navn?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Denne partition kan ikke bruges til loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback-filnavn: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Giv et filnavn"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Filen er allerede brugt af en anden loopback, v�lg en anden fil"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Filen findes allerede. Skal den bruges?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Modulindstillinger"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Diverse"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "enhed"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "niveau"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "enhedsst�rrelse"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "V�r forsigtig: denne operation er farlig."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Hvilken slags partitionering?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Jeg kan desv�rre ikke p� nuv�rende tidspunkt acceptere at oprette /boot p� "
-"drevet (p� en cylinder > 1024). Enten benytter du LILO, hvilket ikke vil "
-"fungere, eller du kan undlade at benytte LILO, hvilket vil betyde, at du "
-"ikke har brug for /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Den partition som du har valgt som rod-partition (/) er fysisk placeret ud "
-"over cylinder nr. 1024 p� harddisken, og du har ikke lavet nogen /boot "
-"partition. Hvis du �nsker at benytte LILO, skal du oprette en /boot "
-"partition indenfor 1024-cylinder gr�nsen."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Du har valgt en programmeret RAID-partition som rod (/).\n"
-"Ingen systemopstarter kan h�ndtere dette uden en /boot partition.\n"
-"S� v�r omhyggelig med at tilf�je en /boot partition"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partitionstabellen for disk %s vil nu blive skrevet p� disken!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Du skal genstarte maskinen for at aktivere �ndringerne"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter formatering af partitionen %s vil alle data p� denne partition g� tabt"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formaterer"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formaterer loopback-fil %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formaterer partition %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Skjul filer"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Flyt filer til den nye partition"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Katalog %s indeholder allerede nogen data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Flytter filer til den nye partition"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopierer %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Fjerner %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partition %s er nu kendt som %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Enhed: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-drevbogstav: %s (bare et g�t)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Type: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Navn: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "St�rrelse: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorer"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylinder %d til %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formateret\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Ikke formateret\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Monteret\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback-fil(er):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition som opstartes som standard\n"
-"    (g�lder kun MS-DOS-opstart, ikke LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Niveau %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Enhedsst�rrelse %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diske %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback-filnavn: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Denne partition er nok\n"
-"en driver-partition, du skal\n"
-"sandsynligvis lade den v�re.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Denne specielle Bootstrap-\n"
-"partition er for at\n"
-"dual-boote dit system.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "St�rrelse: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Opbygning: %s cylindre, %s hoveder, %s sektorer\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diske %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabel-type: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "p� bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Valg: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Krypteringsn�gle for filsystem"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "V�lg din krypteringsn�gle for filsystemet"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Denne krypteringsn�gle er for nem at g�tte (skal mindst v�re p� %d tegn)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Krypteringsn�glerne stemmer ikke overens"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Krypteringsn�gle"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Krypteringsn�gle (igen)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Skift type"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Klik p� et medie"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "S�g efter servere"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering af %s mislykkedes"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ved ikke hvordan man formaterer %s som type %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montering af partition %s i katalog %s mislykkedes"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck afsluttet med fejlkode %d eller signal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fejl ved afmontering af %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simpel"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "med /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Du kan ikke bruge JFS p� partitioner mindre end 16Mb"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Du kan ikke bruge ReiserFS p� partitioner mindre end 32Mb"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Monteringsstier skal begynde med /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Der findes allerede en partition med monterings-sti %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Du kan ikke bruge et LVM logisk delarkiv for monteringspunkt %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Dette katalog b�r ligge p� rod-filsystemet"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Du skal have et rigtigt filsystem (ext2, reiserfs) til dette "
-"monteringspunkt\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Du kan ikke bruge et krypteret filsystem for monteringspunkt %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Ikke nok fri plads til at tildele nye partitioner automatisk"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Ingenting at lave"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fejl ved �bning af %s for skrivning: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Der er opst�et en fejl - der kunne ikke findes nogen gyldige enheder, hvor "
-"der kan oprettes nye filsystemer. Unders�g din maskine for at finde �rsagen "
-"til problemet"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Du har ikke nogen partitioner!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux er et flerbrugersystem, og dette betyder at hver bruger kan have "
-"sine egne pr�ferencer, sine egne filer og s� videre. Du kan l�se "
-"brugervejledningen for at l�re mere.\n"
-"Men i mods�tning til root, som er administratoren, vil brugerne som du "
-"tilf�jer her ikke have lov til at �ndre nogetsomhelst undtagen deres egne "
-"filer og deres egen ops�tning. Du skal oprette i det mindste �n almindelig "
-"bruger til dig selv.\n"
-"Dette er den konto som du b�r bruge til almindelig brug. Selvom det er meget "
-"praktisk at logge ind som root hver dag, kan det ogs� v�re meget farligt!\n"
-"Den mindste fejltagelse kan betyde at dit system ikke vil virke mere. Hvis "
-"du laver en alvorlig fejltagelse som almindelig bruger, vil du kun m�ske "
-"tabe nogen information, men ikke hele systemet.\n"
-"\n"
-"F�rst skal du indtaste dit rigtige navn. Dette er ikke kr�vet, selvf�lgelig "
-"kan du faktisk skrive hvad du vil. DrakX vil s� tage det f�rste ord du skrev "
-"i boksen og og overf�re det som brugernavn. Dette er navnet, som denne "
-"bruger skal bruge for at logge ind p� systemet. Du kan �ndre dette. Du skal "
-"s� indtaste en adgangskode h�r. Adgangskoden for en ikke-priviligeret "
-"(normal) bruger er ikke s� vigtigt som det for Root fra et sikkerhedsm�ssigt "
-"synspunkt, men det er ingen grund til at negligere det alligevel - n�r det "
-"kommer til stykket er dine filer der er i fare. Hvis du klikker p� Accept�r "
-"bruger, kan du tilf�je s� mange som du �nsker. Tilf�j en bruger for hver af "
-"dine venner: fx din far og din s�ster. N�r du har tilf�jet alle de brugere "
-"du �nsker, v�lg da F�rdig.\n"
-"\n"
-"Klik p� Avanceret-knappen lader dig �ndre standard-skal for denne bruger\n"
-"(bash er standard)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ovenfor er listet de eksisterende Linux-partitioner genkendt p� din disk. Du "
-"kan beholde valgene gjort af vejlederen, de er velegnede til almindelig "
-"brug.  Hvis du �ndrer disse valg skal du i det mindste definere en rod-"
-"partition '/'. Lad v�re med at v�lge en for lille partition, ellers vil du "
-"ikke kunne installere nok programmel. Hvis du �nsker at lagre data p� en "
-"separat partition, skal du ogs� v�lge en '/home' (kun muligt hvis du har "
-"mere end �n Linux-partition). \n"
-"Hver partition er listet som f�lger: 'Navn', 'Kapacitet'.\n"
-"\n"
-"'Navn' er kodet som f�lger: 'drevtype', 'drevnummer', "
-"'partitionsnummer' (for eksempel '/hda1').\n"
-"\n"
-"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
-"SCSI drev.\n"
-"\n"
-"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
-"\n"
-"   * 'a' betyder 'hoved-drev p� den prim�re IDE controller',\n"
-"\n"
-"   * 'b' betyder 'slave-drev p� den prim�re IDE controller',\n"
-"\n"
-"   * 'c' betyder 'hoved-drev p� den s�kund�re IDE controller',\n"
-"\n"
-"   * 'd' betyder 'slave-drev p� den s�kund�re IDE controller'.\n"
-"\n"
-"For SCSI drev betyder 'a' det 'f�rste drev', 'b' betyder det 'andet drev', "
-"osv."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux installationen er fordelt p� flere cdrom-er. DrakX v�d om en "
-"valgt pakke ligger p� en anden cdrom og vil udskyde den aktuelle cd og bede "
-"dig om at is�tte en anden, om n�dvendigt."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Det er nu tid til at angive hvilke pakker du vil installere p� dit system. "
-"Der er tusindvis af pakker til dit Mandrake Linux system, og det forventes "
-"ikke at du kender dem allesammen udenad.\n"
-"\n"
-"Hvis du udf�rer en standard-installation fra cdrom vil du f�rst blive bedt "
-"om at angive de cd-er som du har nu (kun i ekspert-version). Tjek navnene p� "
-"cd'erne og fremh�v boksene svarende til de cd-er du har liggende for "
-"installationen. Klik O.k. n�r du er klar til at forts�tte.\n"
-"\n"
-"Pakkerne er ordnet i grupper svarende til en bestemt anvendelse af din "
-"maskine. Grupperne selv er ordnet i 4 grupper:\n"
-"\n"
-" * 'Arbejdsstation': Hvis din maskine skal bruges som en arbejdsstation, "
-"v�lg da en eller flere af de tilsvarende grupper.\n"
-"\n"
-" * 'Udvikling': hvis maskinen skal bruges til programmering v�lg da de "
-"�nskede grupper.\n"
-"\n"
-" * 'Server': hvis det er planen at maskinen skal v�re en server, er du her i "
-"stand til at v�lge de mest almindelige tjenester, som du �nsker at se "
-"installeret  p� maskinen.\n"
-"\n"
-" * 'Grafisk milj�': Endelig skal du v�lge foretrukne grafiske milj�. V�lg "
-"mindst �t, hvis du �nsker at have en grafisk arbejdsstation!\n"
-"\n"
-"Ved flytning af musen over et gruppenavn vises en kort forklarende tekst om "
-"denne gruppe. Hvis du ikke v�lger nogen grupper ved installation (i  "
-"mods�tning til opgradering), vil en dialog komme frem som foresl�r dig  "
-"forskellige former for minimal installation: \n"
-"\n"
-" * 'Med X' Installerer de f�rrest mulige pakker for at f� en fungerende "
-"grafisk arbejdsstation;\n"
-"\n"
-" * 'Med basal dokumentation' Installerer det basale system plus basale "
-"nytteprogrammer og tilh�rende dokumentation. Denne installation er passende "
-"til at s�tte en server op.\n"
-"\n"
-" * 'Mindst mulige installering' Vil installere den mindst mulige n�dvendigt "
-"for at f� et virkende Linux-system kun med kommandolinjer. Denne "
-"installation fylder omkring 65 Mb.\n"
-"\n"
-"Du kan afkrydse boksen 'Individuelt pakkevalg', hvilket  er nyttigt, hvis du "
-"kender de tilbudte pakker godt, eller hvis du �nsker at have fuld kontrol "
-"over hvad der skal installeres.\n"
-"\n"
-"Hvis du har startet installationen i 'Opdatering'-tilstand, kan du frav�lge "
-"alle grupper for at undg� at installere nogen nye pakker. Dette er nyttigt "
-"ved  reparation eller opdatering af det eksisterende system."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Endelig, afh�ngigt af om du valgte at udv�lge individuelle pakker eller ej, "
-"vil du blive pr�senteret for et tr� med alle pakker opdelt i grupper og "
-"undergrupper. Under gennembladring af tr�et kan du udv�lge hele grupper, "
-"undergrupper eller bare pakker.\n"
-"\n"
-"Hver gang du udv�lger en pakke i tr�et vil en beskrivelse fremkomme til "
-"h�jre. N�r du har afsluttet dine udv�lgelser, s� klik p� Install�r-knappen. "
-"S� begynder selve installationen. Afh�ngig af din maskines hurtighed og "
-"antal pakker som skal installeres kan det tage et stykke tid at g�re "
-"processen f�rdig. Et sk�n p� tiden det tager for f�rdigg�relse vises p� "
-"sk�rmen, s� du kan se om der skulle v�re tid til at nyde en kop kaffe.\n"
-"\n"
-"I tilf�ldet af at en server-pakke er blevet valgt enten med vilje, eller "
-"fordi den var en del af en hel gruppe, vil du blive spurgt om du virkelig "
-"�nsker at installere disse servere. Under Linux Mandrake bliver installerede "
-"servere startet op ved opstart af maskinen. Selvom de er sikre og ikke har "
-"nogen kendte problemer p� udgivelsestidspunktet for distributionen, er det "
-"muligt at sikkerhedshuller opdages efter at denne version af Mandrake Linux "
-"blev f�rdiggjort. Specielt hvis du ikke v�d hvad det er for noget, s� klik "
-"Nej her. Et klik med Ja her vil installere de n�vnte servere og de vil som "
-"standard blive startet automatisk!\n"
-"\n"
-"Automatiske afh�ngigheder-valget deaktiverer simpelthen advarselsdialogen, "
-"som vises hver gang installeringsprogrammet automatisk v�lger en pakke. "
-"Dette sker fordi det er blevet beregnet at den er kr�vet for at "
-"tilfredsstille en afh�ngighed fra en anden pakke for at kunne f�rdigg�re en "
-"vellykket installation.\n"
-"\n"
-"Det klejne disketteikon i bunden af listen muligg�r indl�sning af en "
-"pakkeliste udvalgt ved en tidligere installation. Klik p� denne ikon vil "
-"bede dig om at inds�tte en diskette tidligere frembragt ved slutningen p� en "
-"anden installation. Se r�d nr to i det sidste trin for hvordan en s�dan "
-"diskette kan laves."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Du bliver nu foresl�et at ops�tte din internet- eller netv�rksopkobling. "
-"Hvis du vil forbinde din maskine til internettet eller til et lokalnetv�rk "
-"s� klik p� 'O.k.'. Den automatiske opdagelse af netv�rksenheder og modem vil "
-"blive startet. Hvis opdagelsen mislykkes s� fjern markering i boksen 'Brug "
-"automatisk detektion' n�ste gang. Du kan ogs� v�lge at ikke konfigurere "
-"netv�rket, eller g�re det senere; i s� tilf�lde skal du bare klikke p� "
-"'Annull�r'-knappen.\n"
-"\n"
-"Mulige forbindelser er: almindeligt modem, ISDN-modem, ADSL-forbindelse, "
-"kabel-modem, og endelig en simpel LAN-forbindelse (Ethernet).\n"
-"\n"
-"Vi vil ikke her g� i detaljer med hver konfiguration. Men forsikr dig om, at "
-"du har alle parametrene fra din internetudbyder eller systemadministrator.\n"
-"\n"
-"Du kan l�se i kapitlet i h�ndbogen omkring internetforbindelser om detaljer "
-"omkring konfigureringen, eller simpelthen vente til dit system er "
-"installeret og s� bruge programmet beskrevet d�r til at konfigurere din "
-"forbindelse.\n"
-"\n"
-"Hvis du vil konfigurere netv�rket senere efter installationen, eller hvis du "
-"har afsluttet konfigureringen af din netv�rksforbindelse, v�lg da 'F�rdig'."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Du kan nu v�lge hvilke tjenester du �nsker skal startes ved opstart af "
-"maskinen.\n"
-"\n"
-"Her pr�senteres alle de tjenester, som er med i den aktuelle installation. "
-"Gennemse dem omhyggeligt og v�lg dem fra som ikke altid er n�dvendige ved "
-"opstarten.\n"
-"\n"
-"Du kan f� en kort forklarende tekst om en tjeneste ved at v�lge en bestemt "
-"tjeneste. Hvis du ikke er sikker p� om en tjeneste er nyttig eller ej, er "
-"det dog sikrere at bruge den foresl�ede opf�rsel.\n"
-"\n"
-"V�r specielt varsom p� dette trin hvis du planl�gger at bruge maskinen som "
-"server: du vil formentlig �nske ikke at starte nogensomhelst tjeneste op som "
-"du ikke har brug for. Husk at adskillige tjenester kan v�re farlige hvis de "
-"er aktiveret p� en server. V�lg som hovedregel kun de tjenester som du "
-"virkelig beh�ver."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux h�ndterer tiden i GMT (Greenwich Mean Time) og overs�tter den til "
-"lokal tid if�lge den tidszone du har valgt. Det er imidlertid muligt at "
-"deaktivere dette ved at frav�lge 'Maskinens ur sat til GMT' s� maskinens ur "
-"er det samme som systemets ur. Dette er nyttigt n�r maskinen ogs� bruges til "
-"andre operativsystemer som Windows.\n"
-"\n"
-"Muligheden 'Automatisk tidssynkronisering' vil automatisk tilpasse uret ved "
-"at forbinde til en ekstern tidsserver p� internettet. V�lg en server der "
-"ligger t�t p� dig i listen der pr�senteres. Selvf�lgelig skal du have en "
-"fungerende internetforbindelse for at denne facilitet kan fungere. Den vil "
-"faktisk installere en tidsserver p� din maskine, som om �nsket kan bruges af "
-"andre maskiner p� dit lokalnetv�rk."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (for X-vinduessystem) er hjertet af GNU/Linux' grafiske gr�nseflade, "
-"hvilket alle de grafiske milj�er (KDE, Gnome, AfterStep, WindowMaker)...), "
-"som kommer med Mandrake Linux, bygger p�. I dette afsnit vil DrakX fors�ge "
-"at konfigurere X automatisk.\n"
-"\n"
-"Det er meget sj�ldent at dette mislykkes for DrakX, med mindre maskinellet "
-"er meget gammelt (eller meget nyt). Hvis det lykkes, vil DrakX starte X "
-"automatisk med den bedst mulige opl�sning afh�ngig af sk�rmens st�rrelse. Et "
-"vindue vil s� komme frem og sp�rge om du kan se det.\n"
-"\n"
-"Hvis du laver en ekspert-installering, vil du komme ind i X-konfigurerings- "
-"vejlederen. Se det tilh�rende afsnit af manualen for yderligere oplysning om "
-"denne vejleder.\n"
-"\n"
-"Hvis du kan se beskeden under afpr�vningen, og svarer Ja, s� vil DrakX "
-"forts�tte til det n�ste trin. Hvis du ikke kan se beskeden, betyder det "
-"simpelthen at konfigurationen var forkert, og testen vil automatisk "
-"afsluttes efter 10 sekunder, og genfremvise sk�rmen."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"M�ske er du ikke s�rligt tilfreds med det f�rste fors�g med X konfigurering "
-"(sk�rmen for lille, flyttet til venstre eller h�jre...). Derfor vil DrakX "
-"sp�rge dig om konfigurationen passer dig, selvom X starter op korrekt. DrakX "
-"vil ogs� foresl� �ndringer ved at vise en liste af gyldige tilstande som den "
-"kunne finde, og s� bede dig om at v�lge �n. \n"
-"Som en sidste udvej, hvis du stadig ikke kan f� X til at virke, v�lg da �ndr "
-"grafikkort, v�lg Ukendt kort, og n�r du bliver spurgt om hvilken server du "
-"vil have, v�lg da FBDev. Dette er en fejlsikker mulighed som virker med alle "
-"moderne grafikkort. V�lg derefter Test igen for at v�re sikker."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Til sidst vil du blive spurgt om du �nsker at se den grafiske gr�nseflade "
-"ved opstart. Bem�rk at du vil blive spurgt om dette selvom du har valgt ikke "
-"at afpr�ve konfigurationen. Selvf�lgelig vil du �nske at svare Nej, hvis din "
-"maskine skal bruges som server, eller hvis ikke lykkedes dig at f� sk�rmen "
-"konfigureret."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux-cdrommen har en indbygget rednings-tilstand. Du kan f� fat i "
-"denne ved at starte op fra cdrommen, trykke 'F1'-tasten ved opstart, og "
-"indtaste 'rescue' ved opstartsledeteksten. Men i tilf�lde af at din maskine "
-"ikke kan starte op fra cdrommen, b�r du komme tilbage til dette trin for "
-"hj�lp i mindst to situationer:\n"
-"\n"
-" * ved installering af opstartsindl�seren vil drakX genskrive "
-"opstartssektoren (MBR) p� din hoveddisk (medmindre du bruger en anden "
-"opstartsh�ndterer) s� du kan starte enten Windows eller GNU/Linux (forudsat "
-"du har Windows p� dit system). Hvis du har brug for at geninstallere "
-"Windows, vil Microsoft installeringsprocessen overskrive opstartssektoren, "
-"og s� vil du ikke v�re i stand til at starte GNU/Linux!\n"
-"\n"
-" * Hvis der opst�r et problem, og du ikke kan starte GNU/Linux op fra "
-"harddisken, vil denne diskette v�re den eneste m�de at starte GNU/Linux op "
-"p�. Den indeholder et p�nt antal systemv�rkt�jer til at genskabe et system "
-"som er g�et ned pga. str�msvigt, en uheldig tastefejl, en skrivefejl i en "
-"adgangskode, eller nogen anden �rsag.\n"
-"\n"
-"N�r du klikker p� dette trin, vil du blive bedt om at inds�tte en diskette i "
-"drevet. Disketten du inds�tter skal v�re tom eller kun indeholde data som du "
-"ikke har brug for. Du beh�ver ikke formatere den, da drakX vil overskrive "
-"hele disketten."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Nu skal du v�lge hvor p� din harddisk du vil installere dit Mandrake Linux-"
-"operativsystem. Hvis disken er tom eller et eksisterende operativsystem "
-"bruger alt pladsen p� den, bliver du n�dt til at partitionere den. "
-"Partitionering vil sige at disken deles i logiske dele for at g�re plads til "
-"dit nye Mandrake Linux-system.\n"
-"\n"
-"Da en partitionering normalt ikke kan fortrydes kan det godt v�re  "
-"frustrerende og stressende for nybegyndere. Heldigvis er der en vejleder som "
-"forenkler denne proces. F�r du begynder stud�r da i manualen og tag den tid "
-"du skal bruge.\n"
-"\n"
-"Hvis du k�rer installeringen i ekspert-tilstand kommer du ind i Mandrake "
-"Linux' partitioneringsv�rkt�j, DiskDrake. Dette vil lade dig finindstille "
-"dine partitioner. Se kapitlet om DiskDrake i manualen. Fra installations-"
-"gr�nsefladen kan du bruge de vejledere som beskrevet her ved at klikke "
-"knappen 'Vejleder' p� gr�nsefladen.\n"
-"\n"
-"Hvis partitionerne allerede er definerede (fra en tidlige installation eller "
-"fra et andet partitions-v�rkt�j), skal du bare v�lge dem for at installere "
-"dit Linux system\n"
-"\n"
-"Hvis partitionerne ikke er lavet endnu, bliver du n�dt til at oprette dem "
-"ved brug af vejlederen. Afh�ngig af din disks konfiguration er flere "
-"muligheder tilstede:\n"
-"\n"
-" * 'Brug fri plads': Dette vil simpelthen f�re til en automatisk opdeling af "
-"den ledige diskplads. Du vil ikke blive spurgt om mere.\n"
-"\n"
-" * 'Brug eksisterende partition': vejlederen har fundet en eller flere "
-"eksisterende Linux-partitioner p� din harddisk. Hvis du vil bruge dem, s� "
-"v�lg denne mulighed.\n"
-"\n"
-" * 'Brug den fri plads p� Windows-partitionen': hvis Microsoft Windows er "
-"installeret p� din disk og bruger al pladsen, bliver du n�dt til at lave "
-"plads til Linux. For at g�re det kan du slette dine Microsoft Windows "
-"partitioner og data (se \"Slet hele disken\" eller \"Ekspert niveau\" ) "
-"eller �ndre st�rrelsen p� din Microsoft Windows-partition. "
-"St�rrelses�ndringen kan fortages uden tab af data. Denne l�sning er "
-"anbefalet hvis du vil bruge b�de Mandrake Linux og Microsoft Windows p� "
-"samme maskine.\n"
-"\n"
-"  F�r du v�lger denne l�sning, b�r du forst� at st�rrelsen p� din Microsoft "
-"Windows partition vil blive mindre end den er nu. Det betyder at du vil have "
-"mindre fri plads under Microsoft Windows til at gemme din data eller "
-"installere nyt programmel.\n"
-"\n"
-" * 'Slet hele disken': hvis du vil slette alle data p� alle partitioner p� "
-"denne disk og erstatte dem med dit nye Mandrake Linux-system, kan du v�lge "
-"denne mulighed. V�r forsigtig med denne l�sning, du vil ikke v�re i stand "
-"til at fortryde dine �ndringer efter at du har sagt ja.\n"
-"\n"
-"   !! Hvis du bruger denne mulighed vil alle data p� din disk g� tabt. !!\n"
-"\n"
-" * 'Fjern Windows': dette vil simpelthen slette alt p� disken og begynde fra "
-"en frisk, og partitionere fra ny. Alle data p� din disk vil g� tabt.\n"
-"\n"
-"   !! Hvis du bruger denne mulighed vil alle data p� din disk g� tabt. !!\n"
-"\n"
-" * 'Ekspert-modus': hvis du vil partitionere disken i h�nden, kan du v�lge "
-"dette alternativ. V�r forsigtig f�r du v�lger denne l�sning. Den giver dig "
-"mange muligheder, men er ogs� farlig.  Du kan meget nemt komme til at slette "
-"alle dine data. S� lad v�re med at v�lge den l�sning med mindre du v�d hvad "
-"du g�r."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"V�rsgo'. Installationen en nu f�rdig og dit GNU/Linux-system er nu klar til "
-"brug. Klik bare O.k. for at genstarte systemet. Du kan starte GNU/Linux "
-"eller Windows, som du foretr�kker det (hvis du har to systemer), s� snart "
-"din maskine er startet op igen.\n"
-"\n"
-"Avanceret-knappen viser to ekstra knapper for at:\n"
-"\n"
-" * generere en auto-installeringsdiskette: for at oprette en installerings- "
-"diskette som automatisk vil udf�re en hel installation uden hj�lp fra en "
-"operat�r, magen til den installation du lige har konfigureret.\n"
-"\n"
-"   Bem�rk at to forskellige muligheder er tilstede efter klik p� knappen:\n"
-"\n"
-"   * Genafspil: Dette er en delvist automatiseret installering da  "
-"partitioneringstrinnet (og kun dette trin) forbliver interaktiv.\n"
-"\n"
-"   * Automatisk: Fuldautomatisk installering: harddisken bliver fuldst�ndig "
-"genoverskrevet, alle data forsvinder.\n"
-"\n"
-"   Denne facilitet er meget nyttig ved installering af et stort antal ens "
-"maskiner. Se afsnittet om autoinstallering p� vores websted.\n"
-"\n"
-" * Gem pakkevalg(*): Gemmer pakkevalget som lavet tidligere. S� n�r en ny "
-"installering laves, kan disketten inds�ttes i drevet og installeringen kan "
-"k�res ved at bruge F1 p� hj�lpesk�rmen idet der indtastes >>linux defcfg="
-"\"floppy\"<<.\n"
-"\n"
-"(*) Du skal have en diskette formateret til FAT (denne oprettes i GNU/Linux "
-"ved at skive \"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Enhver partition der netop er blevet defineret, skal formateres til brug "
-"(formatering betyder oprettelse af et filsystem).\n"
-"\n"
-"Nu kan du ogs� �nske at omformatere nogle allerede eksisterende partitioner "
-"for at slette de data som de indeholder. Hvis du �nsker dette, s� mark�r "
-"ogs� de partitioner som du �nsker at formatere.\n"
-"\n"
-"Bem�rk at det ikke er n�dvendigt at omformatere alle allerede eksisterende "
-"partitioner. Det er n�dvendigt at omformatere de partitioner, der indeholder "
-"operativsystemet (s�som '/', '/usr' og '/var', men du er ikke n�dt til at "
-"omformatere partitioner som du �nsker at beholde (typisk /home).\n"
-"\n"
-"V�r forsigtig med valg af partitioner; efter formatering vil alle data v�re "
-"slettede p� de valgte partitioner, og du vil ikke kunne redde nogetsomhelst "
-"af det.\n"
-"\n"
-"Klik p� 'Ok' n�r du er klar til at formatere partitioner.\n"
-"\n"
-"Klik p� 'Annull�r' hvis du �nsker at v�lge andre partitioner til at "
-"installere dit nye Mandrake Linux operativsystem.\n"
-"\n"
-"Klik p� 'Avanceret' for at v�lge partitioner som du �nsker at tjekke for "
-"d�rlige blokke."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Dit nye Mandrake Linux styresystem er i f�rd med at blive installeret. "
-"Afh�ngig af det antal pakker, du installerer og hastigheden p� din maskine "
-"kan dette tage fra nogen f� minutter til en del l�ngere tid. \n"
-"Hav venligst t�lmodighed med dette."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"P� det tidspunkt hvor du installerer Mandrake Linux er det sandsynligt at "
-"nogen af pakkerne er blevet opdaterede siden den oprindelige udgivelse. "
-"Nogle fejl er m�ske blevet rettet, og sikkerhedsproblemer m�ske l�st. Vi "
-"foresl�r dig at hente disse ned fra internettet for at disse opdateringer "
-"kan komme dig til gode. V�lg 'Ja' hvis du har en fungerende internet- "
-"forbindelse eller 'Nej' hvis du foretr�kker at installere opdaterede pakker "
-"senere.\n"
-"\n"
-"Valg af 'Ja' viser en liste af steder hvorfra opdateringer kan hentes. V�lg "
-"en der er n�r ved dig. S� vil et tr� med pakkevalg fremkomme:  gennemse "
-"valget og tryk 'Install�r' for at modtage og installere den valgte pakke "
-"eller 'Annull�r'for at afbryde."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"F�r du g�r videre b�r du l�se betingelserne i licensen omhyggeligt.  Den "
-"omfatter hele Mandrake Linux distributionen, og hvis du ikke er  enig i alle "
-"betingelserne i den, s� klik p� 'N�gt'-knappen. Det vil  �jeblikkeligt "
-"afslutte installationen. For at forts�tte installationen  skal du klikke p� "
-"'Accept�r'-knappen."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nu er det tid til at v�lge det �nskede sikkerhedsniveau for maskinen. "
-"Hovedreglen er at jo mere kendt maskinen er, og jo vigtigere data er, des "
-"h�jere b�r sikkerhedsniveauet v�re. Men et h�jere sikkerhedsniveau vindes "
-"normalt p� bekostning af letheden af anvendelsen. Kig i kapitlet MSEC i "
-"referenceh�ndbogen for mere information om betydningen af niveauerne.\n"
-"\n"
-"Hvis du ikke v�d hvad du skal v�lge, s� behold den foresl�ede mulighed."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Nu skal du v�lge hvor Mandrake Linux skal installeres. Hvis partitionerne "
-"allerede er lavet, enten fra en tidligere installation af GNU/Linux eller "
-"fra et andet partitioneringsv�rkt�j), kan du bruge dem. Ellers skal disk-"
-"partitionerne laves f�rst.\n"
-"\n"
-"For at lave partitioner skal du f�rst v�lge en harddisk. Du kan v�lge disken "
-"der skal partitioneres ved at trykke p� \"hda\" for den f�rste IDE disk, "
-"\"hdb\" for den anden eller \"sda\" for den f�rste SCSI disk og s� videre.\n"
-"\n"
-"For at partitionere den valgte disk kan du bruge disse muligheder:\n"
-"\n"
-"  * 'Slet alt': Dette valg sletter alle partitioner p� den valgte disk.\n"
-"\n"
-"  * 'Allok�r automatisk': dette valg tillader dig automatisk at lave Ext2 og "
-"swappartitioner p� den fri plads p� din disk.\n"
-"\n"
-"* 'Mere': giver adgang til flere faciliteter:\n"
-"\n"
-"    * 'Gem partitionstabel': Gemmer din partitionstabel p� en diskette. "
-"Nyttigt ved senere redning af partitionstabellen, om n�dvendigt. Det er "
-"st�rkt anbefalet at bruge dette trin.\n"
-"\n"
-"    * 'Genskab partitionstabel': lader dig genskabe en tidligere gemt "
-"partitionstabel fra diskette.\n"
-"\n"
-"    * 'Red partitionstabel': hvis din partitionstabel er beskadiget, kan du "
-"pr�ve at redde den med denne mulighed. V�r forsigtig og husk at det kan sl� "
-"fejl.\n"
-"    * 'Automatisk montering af flytbart medie': fravalg af denne mulighed "
-"vil tvinge brugere til at manuelt montere og afmontere media s�som disketter "
-"og cdrommer.\n"
-"\n"
-" * 'Vejleder': Hvis du �nsker at bruge vejlederen til at partitionere din "
-"disk, kan du bruge denne mulighed. Dette anbefales, hvis du ikke har det "
-"store kendskab til partitionering.\n"
-"\n"
-" * 'Fortryd': Du kan bruge denne mulighed for at annullere dine �ndringer.\n"
-"\n"
-" * 'Skift mellem normal og ekspert-version': giver mulighed for flere "
-"handlinger med partitioner (type, valgmuligheder, format) og giver mere "
-"information.\n"
-"\n"
-" * 'F�rdig': n�r du er f�rdig med partitionering af din disk, dette vil "
-"skrive �ndringerne tilbage p� disken.\n"
-"\n"
-"Bem�rk: du kan n� alle mulighederne ved at bruge tastaturet: navig�r gennem "
-"partitionerne med Tab og op- og ned-pilene.\n"
-"\n"
-"N�r en partition er valgt kan du bruge:\n"
-"\n"
-" * Ctrl-c for at lave en ny partition (N�r en tom partition er valgt);\n"
-"\n"
-" * Ctrl-d for at slette en partition;\n"
-"\n"
-" * Ctrl-m for at s�tte et monteringssti.\n"
-"\n"
-"For at f� information om de forskellige tilg�ngelige filsystemstyper kan du "
-"l�se kapitlet ext2fs i 'Referencemanualen'.\n"
-"\n"
-"Hvis du er i gang med at installere p� en PPC-maskine skal du lave en lille "
-"HFS-'bootstrap'-partition p� mindst 1MB til  Yaboot-systemstarteren. Hvis du "
-"v�lger at lave partitionen en smule st�rre, f.eks. 50MB kan den v�re nyttig "
-"til at gemme en ekstra kerne og ramdisk-billede for n�dsituationer ved "
-"opstart."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mere end �n Microsoft Windows partition er blevet genkendt p� dit diskdrev. "
-"V�lg den som du �nsker at �ndre st�rrelse p� for at kunne installere dit nye "
-"Mandrake Linux operativsystem.\n"
-"\n"
-"Hver partition er listet som f�lger: 'Linux navn', 'Windows navn', "
-"'Kapacitet'.\n"
-"\n"
-"'Linux navn' er kodet som f�lger: 'drevtype', 'drevnummer', "
-"'partitionsnummer' (for eksempel '/hda1').\n"
-"\n"
-"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
-"SCSI drev.\n"
-"\n"
-"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
-"\n"
-"   * 'a' betyder 'hoved-drev p� den prim�re IDE controller',\n"
-"\n"
-"   * 'b' betyder 'slave-drev p� den prim�re IDE controller',\n"
-"\n"
-"   * 'c' betyder 'hoved-drev p� den s�kund�re IDE controller',\n"
-"\n"
-"   * 'd' betyder 'slave-drev p� den s�kund�re IDE controller'.\n"
-"\n"
-"For SCSI drev betyder 'a' det 'f�rste drev', 'b' betyder det 'andet drev', "
-"osv.\n"
-"\n"
-"'Windows navn' er det bogstav som dit drev har under Windows (den f�rste\n"
-"disk eller partition kaldes 'C:')."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Hold ud! Dette kan tage adskillige minutter."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX skal nu vide om du vil udf�re en standard-installation ('Anbefalet'), "
-"eller om du �nsker at have st�rre kontrol ('Ekspert'). Du kan ogs� v�lge om "
-"du �nsker at udf�re en nyinstallering eller en opgradering af et  "
-"eksisterende Mandrake Linux-system. \n"
-"\n"
-"* 'Install�r' udraderer helt det gamle system. Afh�ngigt af hvad der i "
-"�jeblikket er p� din maskine vil du dog kunne beholde nogen gamle "
-"partitioner (Linux eller andet) u�ndret.\n"
-"\n"
-"* 'Opgrad�r' Denne installationsklasse tillader simpel opdatering af de "
-"pakker der i �jeblikket er installeret p� dit Mandrake Linux-system. Den "
-"beholder de nuv�rende partitioner p� dine diskdrev s� vel som ops�tningen af "
-"brugere. Alle andre konfigurationstrin forbliver mulige som for almindelig "
-"installation.\n"
-"\n"
-"* 'Opgrad�r kun pakker' Denne spritnye installationsklasse kan opgradere et "
-"eksisterende Linux Mandrake-system idet al systemkonfiguration beholdes "
-"u�ndret. Tilf�jelse af nye pakker til den nuv�rende installation vil ogs� "
-"v�re muligt.\n"
-"\n"
-"Afh�ngig af din viden om GNU/Linux kan du v�lge et af de f�lgende:\n"
-"\n"
-"* Anbefalet: hvis du aldrig har installeret et GNU/Linux-operativsystem s� "
-"v�lg dette. Installationen vil v�re meget nem og du vil kun blive stillet "
-"nogen f� sp�rgsm�l.\n"
-"\n"
-"* Ekspert: hvis du har en god viden om GNU/Linux, kan du v�lge denne "
-"installationsklasse. Ekspertinstallationen vil lade dig lave en meget "
-"tilpasset installation. Besvarelse af nogen af sp�rgsm�lene kan v�re meget "
-"sv�rt hvis du ikke har s� godt et kendskab til GNU/Linux, s� lad v�re med at "
-"v�lge dette, medmindre du v�d hvad du laver."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalt vil drakX have valgt det rigtige tastatur til dig (afh�ngigt af  "
-"sproget du har valgt) og du vil s� ikke se dette trin. Men du har m�ske "
-"ikke  et tastatur som svarer n�jagtigt til dit sprog: for eksempel hvis du "
-"er en  engelsktalende svejtser, vil du m�ske stadig �nske at dit tastatur "
-"skal v�re  et svejtsisk tastatur. Eller hvis du taler engelsk men bor i "
-"Qu�bec, er du  m�ske i samme situation. I begge tilf�lde m� du g� tilbage "
-"til dette  installationstrin og v�lge et passende tastatur fra listen.\n"
-"\n"
-"Klik p� 'mere'-tasten for at blive pr�senteret for den fulde \n"
-"liste af underst�ttede tastaturer."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"V�lg dit foretrukne sprog for brug under installation og p� systemet. \n"
-"Der er en Avanceret-knap som lader dig v�lge andre sprog, der installeres  "
-"p� maskinen. Valg af andre sprog vil installere de sprogspecifikke filer for "
-"systemdokumentation og programmer. Hvis du for eksempel vil bev�rte folk fra "
-"Spanien p� din maskine, v�lg da engelsk som hovedsproget i tr�-visningen, og "
-"afkryds s� i den avancerede afdeling boksen  svarende til spansk|Spanien.\n"
-"\n"
-"Bem�rk at flere sprog kan installeres samtidigt. N�r du er f�rdig med at "
-"v�lge yderligere sprog, s� klik O.k. for at forts�tte."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Normalt antager drakX at du har en to-knapsmus og vil lave en ops�tning hvor "
-"den tredje knap emuleres. DrakX vil automatisk vide om den er PS/2, seriel "
-"eller USB.\n"
-"\n"
-"Hvis du �nsker en anden type mus, v�lg da den rigtige type mus fra den viste "
-"liste.\n"
-"\n"
-"Hvis du v�lger en mus forskellig fra den forvalgte, vil du blive pr�senteret "
-"for en sk�rm for museafpr�vning. Brug knapperne og hjulet for at efterpr�ve, "
-"om indstillerne er gode. Hvis musen ikke virker korrekt, tryk da p� "
-"mellemrumstangenten eller vognretur for at 'Annullere' og v�lg forfra."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"V�lg den rigtige port. For eksempel er navnet for COM1-porten  under MS "
-"Windows 'ttyS0' under GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Dette er den vanskeligste beslutning omkring sikkerheden af dit GNU/Linux- "
-"system: Du skal indtaste din root-adgangskode. Root er systemadministratoren "
-"og er den eneste der har lov til at lave opdateringer, tilf�je brugere, "
-"�ndre i den overordnede systemkonfiguration og s� videre. Kort sagt, root "
-"kan g�re alt! Derfor skal du v�lge en adgangskode der er sv�r at g�tte - "
-"DrakX vil fort�lle dig hvis det er for nemt. Som v�st kan du v�lge ikke at "
-"indtaste en adgangskode, men vi advarer dig p� det kraftigste mod dette, om "
-"ikke andet med �n begrundelse: tro ikke at fordi du startede GNU/Linux op, "
-"s� er dine andre operativsystemer velforvarede. Da root kan overvinde alle "
-"forhindringer og uforvarende slette alle data p� partitioner ved sorgl�st at "
-"behandle partitionerne selv, er det vigtigt at det er vanskeligt at blive "
-"root.\n"
-"\n"
-"Adgangskoden b�r v�re en blanding af bogstaver og tal og mindst 8 tegn "
-"langt. Skriv aldrig en adgangskode ned for root - det g�r det for nemt at "
-"bryde ind i et system.\n"
-"\n"
-"G�r dog ikke adgangskoden for lang eller kompliceret da du skal v�re i stand "
-"til at huske den uden for stort besv�r.\n"
-"\n"
-"Adgangskoden vil ikke blive vist p� sk�rmen n�r du indtaster den. Du skal "
-"derfor indtaste adgangskoden to gange, for at begr�nse risikoen for "
-"tastefejl. Hvis du kommer til at lave den samme tastefejl to gange, vil "
-"denne 'ukorrekte' adgangskode v�re kr�vet n�r du forbinder dig til "
-"systemet.\n"
-"\n"
-"I ekspert-tilstand vil du blive spurgt om du vil koble op til en "
-"autenticerings-server, som NIS eller NDAP.\n"
-"\n"
-"Hvis dit netv�rk bruger LDAP (eller NIS)-protokollen til autentificering, "
-"v�lg da LDAP (eller NIS). Hvis du ikke v�d det, s� sp�rg din "
-"systemadministrator.\n"
-"\n"
-"Hvis din maskine ikke er forbundet til noget administreret netv�rk, �nsker "
-"du nok at v�lge Lokale filer for autentificering"
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO og GRUB er opstartsindl�sere for GNU/Linux. Dette trin er normalt helt "
-"automatiseret. Faktisk vil drakX analysere opstartsektoren p� disken og vil "
-"handle ud fra dette, afh�ngig af hvad den finder h�r:\n"
-"\n"
-" * Hvis den finder en Windows opstartssektor vil den erstatte den med en "
-"GRUB/LILO opstartssektor, s� du kan starte GNU/Linux eller et andet "
-"operativsystem;\n"
-"\n"
-" * Hvis den finder en GRUB eller LILO opstartssektor vil den erstatte den "
-"med en ny;\n"
-"\n"
-"Hvis den er i tvivl vil drakX vise en dialog med forskellige muligheder.\n"
-"\n"
-" * 'Opstartsindl�ser der bruges': du f�r her tre muligheder:\n"
-"\n"
-"   * 'GRUB': hvis du foretr�kker GRUB (tekstmenu).\n"
-"\n"
-"   * 'LILO med grafisk menu': hvis du foretr�kker LILO med "
-"grafikgr�nseflade.\n"
-"\n"
-"   * 'LILO med tekstmenu': hvis du foretr�kker LILO med tekstgr�nseflade.\n"
-"\n"
-" * 'Opstartsenhed': I de fleste tilf�lde vil det ikke v�re n�dvendigt at "
-"�ndre standard (/dev/hda), men hvis du foretr�kker det, kan "
-"opstartsindl�seren installeres p� det andet diskdrev (/dev/hdb), eller endda "
-"p� en diskette (/dev/fd0).\n"
-"\n"
-" * 'Forsinkelse f�r opstart af standardsystem': Ved genstart af maskinen er "
-"dette den tid der gives til brugeren til at v�lge en anden opstartsindgang "
-"end standard i opstartsindl�serens menu.\n"
-"\n"
-"V�r opm�rksom p� at hvis du v�lger ikke at installere en opstartsindl�ser "
-"(ved at v�lge 'Annull�r' h�r), skal du v�re sikker p� at du har en anden "
-"m�de at starte dit Mandrake Linux-system op p�! V�r ogs� sikker p� hvad du "
-"g�r hvis du �ndrer nogen af tilvalgene her!\n"
-"\n"
-"Et klik p� 'Avanceret'-knappen i denne dialog vil tilbyde mange avancerede "
-"muligheder beregnet til ekspertbrugeren.\n"
-"\n"
-"Efter at du har konfigureret de generelle opstartsindl�serparametre, bliver "
-"du presenteret for listen af opstartsmuligheder som vil v�re tilstede ved "
-"opstarten.\n"
-"\n"
-"Hvis der er et andet operativsystem installeret p� din maskine, vil det "
-"automatisk blive tilf�jet til opstartsmenuen. Her kan du v�lge at "
-"finindstille de eksisterende muligheder. V�lg en indgang og klik p� '�ndr' "
-"for at �ndre eller fjerne den; 'Tilf�j' opretter en ny indgang; og 'F�rdig' "
-"forts�tter til det n�ste installationstrin."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOaderen) og GRUB er opstartsindl�sere: de kan starte enten GNU/"
-"Linux eller ethvert andet system op, som ligger p� din maskine. Normalt "
-"bliver disse andre operativsystemer fundet korrekt og installeret. Hvis "
-"dette ikke er tilf�ldet, kan du lave en indgang i h�nden med denne sk�rm. "
-"V�r omhyggelig med at v�lge de korrekte parametre.\n"
-"\n"
-"M�ske vil du ikke �nske at give nogensomhelst adgang til disse andre "
-"operativsystemer. I dette tilf�lde kan du slette de tilsvarende indgange. "
-"Men s� har du brug for en opstartsdiskette for at starte disse "
-"operativsystemer!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Det er n�dvendigt at du angiver hvor du �nsker at placere oplysningerne\n"
-"kr�vet for at opstarte GNU/Linux.\n"
-"\n"
-"Med mindre du v�d pr�cist hvad du g�r, b�r du v�lge F�rste sektor p� drevet\n"
-"(MBR)."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Her v�lger vi et udskrivningssystem som din maskine skal bruge. Andre "
-"styresystemer tilbyder m�ske �t, men Mandrake tilbyder tre.\n"
-"\n"
-" * 'pdq' - som betyder 'print, don't queue' (udskriv, k� ej), er valget, "
-"hvis du har en direkte forbindelse til din printer, og du �nsker at kunne "
-"klare printproblemer med det samme, og du ikke har nogen printere via "
-"netv�rk. Det vil kun behandle meget simple netv�rkstilf�lde, og er lidt "
-"sl�vt p� netv�rk. V�lg 'pdq' hvis dette er din jomfrurejse med GNU/Linux. Du "
-"kan �ndre dit valg efter installeringen ved at k�re PrinterDrake fra "
-"Mandrakes Kontrolcenter, og klikke p� ekspert-knappen.\n"
-"\n"
-" * 'CUPS' - 'Common Unix Printing System' (F�lles printersystem for Unix) er "
-"fremragende til at udskrive p� din lokale printer, og ogs� p� den, der st�r "
-"p� den anden side af jordkloden. Det er simpelt, og kan virke som en server "
-"eller klient for det bedagede 'lpd'-printsystem, s� det er kompatibelt med "
-"de tidligere systemer. Det kan mange finesser, men den basale ops�tning er "
-"n�sten lige s� nem som for 'pdq'. Hvis du har brug for at dette efterligner "
-"en 'lpd'-server, skal du aktivere 'cups-lpd'-d�monen. Det har grafiske "
-"gr�nseflader for udskrivning og valg af printermuligheder.\n"
-"\n"
-" * 'lprNG' - 'line printer daemon New Generation' (ny generation af "
-"linjeprinterd�monen). Dette system kan g�re omtrent det samme som de andre, "
-"men det vil ogs� kunne skrive til et Novell netv�rk, fordi det underst�tter "
-"IPX-protokollen, og det kan udskrive direkte til skal-kommandoer. Hvis du "
-"har brug for Novell eller udskrivning til kommandoer uden at bruge en "
-"separat kanaliserings-konstruktion, s� brug lprNG. Ellers er CUPS at "
-"foretr�kke, da det er simplere og bedre til at fungere over netv�rk."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX er nu ved at bestemme alle IDE-enheder der er tilstede p� din maskine. "
-"Den vil ogs� lede efter en eller flere PCI SCSI-kort p� dit system. Hvis et "
-"SCSI-kort findes, vil DrakX automatisk installere en driver til det.\n"
-"\n"
-"Da maskinelefters�gningen nogen gange ikke vil finde et stykke udstyr, vil "
-"DrakX alligevel sp�rge dig om du har et SCSI-kort installeret i din maskine. "
-"Du vil blive pr�senteret for en liste af SCSI-kort, som du kan v�lge fra. "
-"Svar Nej hvis du ikke har noget SCSI-udstyr. Hvis du ikke er sikker, kan du "
-"ogs� tjekke listen over udstyr i din maskine ved at v�lge Se maskinelinfo og "
-"klikke O.k. Unders�g listen over udstyr og klik s� p� O.k.-knappen for at "
-"vende tilbage til sp�rgsm�let om SCSI-udstyr.\n"
-"\n"
-"Hvis du m�tte angive din kort manuelt, vil DrakX sp�rge om du vil "
-"specificere nogle indstillingsmuligheder for den. Du b�r dog lade DrakX "
-"sp�rge udstyret om ops�tningen. Det virker som regel fint. \n"
-"Hvis DrakX ikke kan f� oplysninger om indstillinger ud af udstyret, som skal "
-"bruges til ops�tningen, skal du angive ops�tningsinformation til driveren. "
-"Se i brugervejledningen (kapitel 3, underafsnit \"Collective informations on "
-"your hardware\") om hj�lp med at finde informationen i maskinel-"
-"dokumentationen, fra fabrikantens side (hvis du har Internet adgang) eller "
-"fra Microsoft Windows (hvis du brugte dette udstyr med Windows p� dit "
-"system)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Du kan tilf�je flere valgmuligheder for Yaboot, enten til andre "
-"styresystemer, andre kerner, eller til n�d-opstart.\n"
-"\n"
-"For andre styresystemer best�r indgangen blot af et navn og rodpartitionen\n"
-"\n"
-"Der er for Linux nogen f� valgmuligheder:\n"
-"\n"
-" * Label: dette er simpelthen navnet som du skal indtaste til ledeteksten "
-"fra Yaboot for at v�lge denne opstartsmulighed.\n"
-"\n"
-" * Image: Dette vil v�re navnet p� den kerne der skal opstartes. Typisk "
-"vmlinux eller en variation p� vmlinux med en endelse.\n"
-"\n"
-" * Root: root enheden eller \"/\" for din Linux installation.\n"
-"\n"
-" * Append: p� Apple udstyr bruges kerne-append muligheden ganske ofte til at "
-"hj�lpe med initialisering af billedudstyr, eller til at aktivere emulering "
-"af museknapper for de ofte manglende knap 2 og knap 3 p� musen p� en typisk "
-"Apple mus. Det f�lgende er nogle eksempler:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: denne mulighed kan bruges enten til at indl�se de f�rste moduler, "
-"f�r opstartsenheden er tilg�ngelig, eller til at indl�se en ramdisk ved "
-"opstart i en n�dsituation.\n"
-"\n"
-" * Initrd-size: den almindelige st�rrelse p� en ramdisk er generelt 4.096 "
-"byte. Hvis du har brug for at udl�gge en stor ramdisk kan denne mulighed "
-"bruges.\n"
-"\n"
-" * Read-write: normalt bliver rod-partitionen f�rst bragt op skrivebeskyttet "
-"for at muligg�re et filsystemstjek f�r systemet g�r i luften. Her kan du "
-"tilsides�tte denne ops�tning.\n"
-"\n"
-" * NoVideo: skulle Apple-billedudstyret vise sig at v�re specielt "
-"problemfyldt kan du v�lge denne mulighed for at starte op i 'novideo'-"
-"tilstand, med indbygget rammebufferunderst�ttelse.\n"
-"\n"
-" * Default: v�lger denne indgang som v�rende det normale Linux valg, som "
-"v�lges bare ved at trykke RETUR ved yaboots ledetekst. Denne indgang vil "
-"ogs� blive fremh�vet med en '*', hvis du trykker Tab for at se "
-"opstartsvalgene."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot er en systemstarter til NewWorld MacIntosh-maskinel. Den kan starte "
-"enten GNU/Linux, MacOS eller MacOSX, hvis de er til stede p� din maskine. "
-"S�dvanligvis vil disse andre styresystemer blive korrekt opdaget og "
-"installeret. Hvis dette ikke skulle v�re tilf�ldet kan du her tilf�je en "
-"indgang i h�nden. V�r omhyggelig med at v�lge de korrekte parametre.\n"
-"\n"
-"Yaboots hovedvalg er:\n"
-"\n"
-"  * Init-besked: En enkel tekstbesked som vises f�r valg af opstart.\n"
-"\n"
-"  * Opstartsenhed: Angiver hvor du �nsker at placere informationen som er "
-"n�dvendig for at starte GNU/Linux. Du vil generelt have indstillet en "
-"bootstrap-partition tidligere til at have denne information.\n"
-"\n"
-"  * Open firmwareforsinkelse: Til forskel fra LILO er der to forsinkelser "
-"mulige med yaboot. Den f�rste forsinkelse bliver m�lt i sekunder og du kan "
-"ved det punkt v�lge mellem CD, OF-opstart, MacOS eller Linux.\n"
-"\n"
-"  * Ventetid f�r kerneopstart: Denne er lig LILO-opstartsforsinkelsen. Efter "
-"at have valgt Linux vil du have denne ventetid gange 0,1 sekunder f�r din "
-"forvalgte kernebeskrivelse bliver valgt.\n"
-"\n"
-"  * Aktiv�r CD-opstart?: Hvis du v�lger dette valg vil  du kunne trykke 'C' "
-"for CD ved det f�rste opstartsvalg.\n"
-"\n"
-"  * Aktiver OF-opstart?: Hvis du v�lger dette valg vil du kunne trykke 'N' "
-"for 'Open Firmware' ved det f�rste opstartsvalg.\n"
-"\n"
-"  * Forvalgt styresystem: Du kan v�lge hvilket forvalgt styresystem der skal "
-"startes n�r Open Firmwareforsinkelsen er udl�bet."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Her pr�senteres forskellige parametre relateret til din maskine. Afh�ngig af "
-"dit installerede maskinel vil - eller vil du ikke - se de f�lgende "
-"indgange:\n"
-"\n"
-" * 'Mus': tjek den aktuelle musekonfiguration og klik p� knappen for om "
-"n�dvendigt at �ndre den.\n"
-"\n"
-" * 'Tastatur': tjek den aktuelle tastaturkonfiguration og klik p� knappen "
-"for om n�dvendigt at �ndre den.\n"
-"\n"
-" * 'Tidszone': DrakX g�tter normalt din tidszone fra det sprog, du har "
-"valgt. Men ogs� her, som ved valg af tastatur, er du m�ske ikke i det land "
-"som dit sprog indikerer, s� du har m�ske brug for at klikke p� 'Tidszone'-"
-"knappen s� du kan konfigurere uret svarende til den tidszone du er i.\n"
-"\n"
-" * 'Printer': Et klik p� 'Ingen printer'-knappen vil �bne vejlederen for "
-"printerkonfigurering.\n"
-"\n"
-" * 'Lydkort': Hvis et lydkort er blevet fundet p� dit system, vil det blive "
-"vist her. Ingen �ndringer er mulige p� installationstidspunktet.\n"
-"\n"
-" * 'Tv-kort': Hvis et tv-kort er blevet fundet p� dit system, vil det blive "
-"vist her. Ingen �ndringer er mulige p� installationstidspunktet.\n"
-"\n"
-" * 'ISDN-kort': Hvis et ISDN-kort er blevet fundet p� dit system, vil det "
-"blive vist her. Du kan klikke p� knappen for at �ndre de tilh�rende "
-"parametre."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"V�lg det diskdrev som du vil slette for at installere din nye Mandrake Linux "
-"partition. V�r forsigtig, alle data som er p� der, vil g� tabt og vil ikke "
-"kunne genskabes!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klik p� 'O.k.' hvis du �nsker at slette alle data og pertitioner der ligger "
-"p� dette diskdrev. V�r omhyggelig, efter klik p� O.k. vil du ikke v�re i "
-"stand til at redde nogen data eller partitioner, der ligger p� dette "
-"diskdrev, inklusive alle Windows data.\n"
-"Klik p� 'Annul�r' for at anullere denne handling uden at tabe nogen data og "
-"partitioner der er tilstede p� dette diskdrev."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Kunne ikke f� adgang til kernemoduler svarende til din kerne (fil %s "
-"mangler), dette betyder normalt at din opstartsdiskette ikke stemmer overens "
-"med installationsmediet (lav en nyere opstartsdiskette)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Du skal ogs� formatere %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Du har valgt f�lgende servere: %s\n"
-"\n"
-"\n"
-"Disse servere er aktiveret som standard. De har ingen kendte "
-"sikkerhedsproblemer, men nogen nye kan blive fundet. I s� tilf�lde skal du "
-"opgradere s� snart som mulig.\n"
-"\n"
-"\n"
-"�nsker du virkelig at installere disse servere?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan ikke bruge rundkastning uden noget NIS-dom�ne"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inds�t en tom diskette i diskette-drev %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Denne diskette er ikke formatteret til FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"For at bruge dette gemte pakkevalg, start installationen op med``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fejl ved l�sning af filen %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Noget maskinel p� din maskine skal bruge ''propriet�re'' drivere for at "
-"virke.\n"
-"Du kan finde information om dem hos: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Du skal have en rod partition. For at f� dette, lav en ny partition (eller "
-"v�lg en eksisterende).\n"
-"V�lg s� kommandoen \"Monterings-sti\" og s�t den til `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Du skal tildele en partition til Swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Du har ingen Swap partition\n"
-"\n"
-"Forts�t alligevel?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Du skal have en FAT-partition monteret under /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Brug fri plads"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ikke nok fri plads til at tildele nye partitioner"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Brug eksisterende partition"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Der er ingen eksisterende partition der kan bruges"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Brug Windows partitionen til Loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Hvilken partition vil du benytte som Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "V�lg st�rrelserne"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Rod-partitions st�rrelse i Mb: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Swap-partitions st�rrelse i Mb: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Brug den frie plads p� Windows-partitionen"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Hvilken partition �nsker du at �ndre st�rrelse p�?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Udregner Windows-filsystemets gr�nser"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Programmet til at �ndre st�rrelse p� FAT kan ikke behandle din partition, \n"
-"den f�lgende fejl opstod: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Din Windows partition er for fragmenteret, k�r 'defrag' f�rst"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ADVARSEL!\n"
-"\n"
-"DrakX vil nu �ndre st�rrelsen p� din Windows-partition. Udvis forsigtighed: "
-"denne operation er farlig. Hvis du ikke allerede har gjort det, b�r du f�rst "
-"g� ud af denne installation,  k�re scandisk under Windows (og eventuelt "
-"defrag) og s� genstarte installationen. Du b�r ogs� tage en sikkerhedskopi "
-"af dine data. Tryk p� Ok, hvis du er helt sikker."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Hvilken st�rrelse �nsker du at at beholde Windows p�?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partition %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT st�rrelses�ndring mislykkedes: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Der er ingen FAT-partitioner at �ndre st�rrelse p�, eller bruge som loopback "
-"(eller ikke nok plads tilbage)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Slet hele disken"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Fjern Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Du har mere end et diskdrev, hvilken �nsker du at installere Linux p�?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Alle eksisterende partitioner og deres data vil g� tabt p� drev %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Brugerdefineret disk-opdeling"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Brug fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Du kan nu partitionere %s.\n"
-"N�r du er f�rdig, s� husk at gemme med 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Du har ikke nok fri plads p� din Windows-partition"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Kan ikke finde plads til installering"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX partitionerings-vejlederen fandt de f�lgende l�sninger:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partitionering mislykkedes: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Bringer netv�rket op"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Lukker netv�rket ned"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Der opstod en fejl, men jeg ved ikke hvordan den kan h�ndteres p� en\n"
-"p�n m�de.\n"
-"Forts�t p� eget ansvar!"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplik�r monterings-sti %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Nogle vigtige pakker blev ikke installeret rigtigt.\n"
-"Enten er dit cdrom-drev eller din cdrom fejlbeh�ftet.\n"
-"Tjek cdrom'en p� en f�rdiginstalleret maskine ved brug af \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Velkommen til %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Intet tilg�ngeligt diskettedrev"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "G�r til trin `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Dit system har kun f� resurser. Du kan f� problemer med at installere\n"
-"Mandrake Linux. Hvis dette sker, kan du pr�ve en tekst-baseret installation "
-"i stedet\n"
-"Dette g�res ved at trykke 'F1' ved opstart fra cdrommen, og s� skrive 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installationsmetode"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "V�lg en af de f�lgende installations-m�der:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Den totale st�rrelse af de grupper du har valg er cirka %d Mb.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Hvis du �nsker at installere mindre end denne st�rrelse,\n"
-"s� v�lg procentdelen af pakker som du vil installere.\n"
-"\n"
-"En lav procentdel vil kun installere de vigtigste pakker;\n"
-"en procentdel p� 100%% vil installere alle valgte pakker."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Du har kun plads p� din disk til %d%% af disse pakker.\n"
-"\n"
-"Hvis du �nsker at installere mindre end denne st�rrelse,\n"
-"s� v�lg procentdelen af pakker som du vil installere.\n"
-"En lav procentdel vil kun installere de vigtigste pakker;\n"
-"en procentdel p� %d%% vil installere s� mange pakker som muligt."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-"Du har mulighed for at v�lge dem mere pr�cist i n�ste installationstrin"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procentandel pakker til installation"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Valg af pakkegrupper"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Individuelt pakkevalg"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Total st�rrelse: %d / %d Mb"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "D�rlig pakke"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Navn: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Version: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "St�rrelse: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Vigtighed: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Du kan ikke v�lge denne pakke, da der ikke er nok plads tilbage til at "
-"installere den"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "De f�lgende pakker vil blive installeret"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "De f�lgende pakker vil blive afinstalleret"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Du kan ikke v�lge/frav�lge denne pakke"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dette er en n�dvendig pakke, den kan ikke v�lges fra"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Du kan ikke frav�lge denne pakke. Den er allerede installeret"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Denne pakke skal opgraderes\n"
-"Er du sikker p� at du vil frav�lge den?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Du kan ikke frav�lge denne pakke. Den skal opgraderes"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Vis automatisk valgte pakker"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Install�r"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Indl�s/gem p� diskette"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Opdaterer pakkevalg"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimal installation"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "V�lg pakker som skal installeres"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Installerer"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Beregnes"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Resterende tid "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Vent venligst, forbereder installationen"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakker"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installerer pakke %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Accept�r"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "N�gt"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Skift din cdrom!\n"
-"\n"
-"Inds�t cdrom'en med navnet \"%s\" i dit cdrom-drev og tryk p� Ok, n�r det "
-"gjort\n"
-"Hvis du ikke har den s� tryk p� Annull�r, s� undg�s installation fra denne cd"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Forts�t alligevel?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Der opstod en fejl ved sorteringen af pakkerne:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Der opstod en fejl ved installeringen af pakkerne:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Advarsel\n"
-"\n"
-"L�s venligst betingelserne nedenfor omhyggeligt. Hvis du ikke er enig i alt "
-"der st�r, m� du ikke installere indholdet af CD-en. Tryk p� 'N�gt'  for at "
-"forts�tte installationen uden disse cdrommer.\n"
-"\n"
-"\n"
-"Visse komponenter p� den n�ste CD er ikke omfattet af GPL-licensen eller  "
-"andre lignende licenser. Hver enkelt komponent er derfor omfattet af  de "
-"betingelser der er beskrevet i dets egen licens.  L�s derfor venligst "
-"betingelserne omhyggeligt og f�lg de opstillede betingelser n�r du bruger og/"
-"eller videredistribuerer komponenterne. S�danne licenser forhindrer normalt "
-"kopiering (sikkerhedskopiering undtaget),  videredistribuering, at folk "
-"skiller programmet ad, eller �ndrer i komponenterne. Ethvert brud p� "
-"licensen vil �jeblikkeligt fratage dig rettighederne beskrevet i den "
-"specifikke licens. Medmindre licensen giver dig lov hertil, vil det  normalt "
-"ikke v�re tilladt at installere programmet p� mere end �n maskine,  eller "
-"bruge det p� et netv�rk. Hvis du er i tvivl, s� kontakt venligst producenten "
-"af komponenten direkte. Overdragelse til tredjemand eller kopiering af "
-"s�danne komponenter inklusive  dokumentationen er normalt forbudt.\n"
-"\n"
-"\n"
-"Alle rettigheder til komponenterne p� CD-en tilh�rer deres respektive "
-"skabere og er beskyttet af Lov om Ophavsret.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Der er opst�et en fejl"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "�nsker du virkelig at forlade installationen?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licensaftale"
-
-# Mangler
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduktion\n"
-"\n"
-"Operativsystemet og de forskellige komponenter tilg�ngelige i Mandrake Linux "
-"distributionen  vil herefter blive kaldt \"programmelprodukter\". "
-"Programmelprodukterne inkluderer, men er ikke begr�nset til: v�rkt�jss�ttet, "
-"metoder, regler og dokumentation.\n"
-"\n"
-"\n"
-"1. Licensaftale\n"
-"\n"
-"L�s venligst dette dokument. Dette dokument er en licensaftale mellem dig "
-"og   MandrakeSoft S.A., som g�lder til disse programmelprodukter. Ved at "
-"installere, kopiere eller bruge disse programmelprodukter accepterer du "
-"indirekte  og fuldt ud denne licensaftale med dens betingelser og regler. "
-"Hvis du er uenig i nogensomhelst del af denne licens, mister du retten til "
-"at installere, kopiere eller bruge  disse programmelprodukter.  Hvilket som "
-"helst fors�g p� at installere, kopiere eller bruge disse programmelprodukter "
-"p� en m�de som ikke er i overensstemmelse  med betingelserne og reglerne i "
-"denne licens er ulovlig og vil betyde at du mister dine rettighedder under "
-"denne  licens. Hvis dette sker, skal du med det samme �del�gge alle kopier "
-"af disse  programmelprodukter.\n"
-"\n"
-"\n"
-"2. Begr�nset garanti\n"
-"\n"
-"Disse programmelprodukter og dokumenter leveres \"som de er\", uden nogen "
-"form for garanti  efter som hvad lov foreskriver. MandrakeSoft S.A. vil "
-"under ingen omst�ndigheder undtagen hvad lov foreskriver v�re ansvarlig for "
-"specielle,  tilf�ldige, direkte eller indirekte tab af nogen art "
-"(inkluderende uden begr�nsninger, skader ved tab af  forretning, "
-"forstyrrelser af forretning, finansielle tab, advokatbistand, erstatninger "
-"som resultat af en retssag  eller nogen anden form for tab) opst�et under "
-"brugen af disse programmelprodukter eller  mangel p� samme, selv hvis "
-"MandrakeSoft S.A. er blevet gjort opm�rksom p� mulighed for s�danne  "
-"skader.\n"
-"\n"
-"BEGR�NSET GARANTI MED HENSYN TIL REGLER OM BRUG AF FORBUDT PROGRAMMEL I "
-"VISSE LANDE\n"
-"\n"
-"Udover hvad lov foreskriver vil MandrakeSoft S.A. eller deres distribut�rer "
-"under ingen omst�ndigheder v�re  ansvarlig for tilf�ldige, direkte eller "
-"indirekte tab af nogen art (inkluderende uden begr�nsninger skader ved tab "
-"af  forretning, forstyrrelser af forretning, finansielle tab, "
-"advokatbistand, erstatninger som resultat af en retssag  eller nogen anden "
-"form for tab) opst�et under hentning eller brugen af dette programmel fra "
-"Mandrake Linux websider som er forbudt i visse lande ved lov. Denne "
-"begr�nsede garanti g�lder, men er ikke begr�nset til, de st�rke "
-"krypteringskomponenter  inkluderet i disse programmelprodukter.\n"
-"\n"
-"\n"
-"3. GPL-licensen og relaterede licenser. \n"
-"\n"
-"Dette programmel best�r af komponenter lavet af forskellige personer. De "
-"fleste af disse komponenter bliver reguleret efter vilk�rene og aftalerne i "
-"GNU General Public License, herefter kaldet \"GPL\", eller lignende "
-"licenser. De fleste af disse licenser tillader dig at bruge, kopiere, "
-"tilpasse eller redistribuere komponenterne, de d�kker. L�s venligst "
-"vilk�rene og aftalerne i licensaftalen for hver komponent f�r du bruger det. "
-"Sp�rgsm�l ang�ende en komponent bedes adresseret til komponentens forfatter "
-"og ikke til MandrakeSoft. Programmerne udviklet af MandrakeSoft S.A. bliver "
-"reguleret efter GPL-licensen. Dokumentationen skrevet af MandrakeSoft S.A. "
-"bliver reguleret efter en specifik licens. Refer�r venligst til "
-"dokumentationen for yderligere detaljer.\n"
-"\n"
-"\n"
-"4. Intellektuelle rettigheder \n"
-"\n"
-"Alle rettigheder til komponenterne i programmelproduktet tilh�rer deres "
-"respektive forfattere, og er beskyttet af intellektuelle rettigheds- og "
-"ophavsretslove, g�ldende for programmel. MandrakeSoft S.A. forbeholder sine "
-"rettigheder til at �ndre eller tilpasse programmelprodukterne, helt eller "
-"delvist, med alle midler og til alle form�l. \"Mandrake\", \"Mandrake Linux"
-"\" samt de tilh�rende logoer er varem�rker for MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. G�ldende love \n"
-"\n"
-"Hvis dele af denne aftale bliver kendt ugyldig, ulovlig eller ubrugelig ved "
-"en domstolsafg�relse,  vil disse dele blive ekskluderet fra denne kontrakt. "
-"Du vil forblive bundet af de andre g�ldende dele af aftalen. Vilk�rene og "
-"aftalerne i denne licens er reguleret under fransk lov. Alle uenigheder "
-"vedr�rende vilk�rene i denne licens vil fortrinsvist blive l�st udenfor "
-"domstolene. Som en sidste udvej vil uenighederne blive h�ndteret ved den "
-"rette domstol i Paris, Frankrig. Ved sp�rgsm�l omkring dette dokument, "
-"kontakt venligst MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatur"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "V�lg dit tastaturlayout."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Her er den komplette liste over tilg�ngelige tastaturer"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Hvilken installations-klasse �nsker du?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Install�r/Opdat�r"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Er dette en nyinstallation eller en opdatering?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Anbefalet"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Opgradering"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Opgrad�r kun pakker"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "V�lg muse-type."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Muse-port"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "V�lg hvilken seriel port din mus er forbundet til."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulering af knapper"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulering af knap 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulering af knap 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurerer PCMCIA kort..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfigurerer IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ingen ledige partitioner"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Skanner partitioner for at finde monteringspunkter"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "V�lg monterings-stierne"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Jeg kan ikke l�se din partitionstabel, den er for �delagt for mig :( Jeg kan "
-"fors�ge fortsat at udblanke d�rlige partitioner, ALLE DATA vil g� tabt. Den "
-"anden mulighed er at forbyde DrakX at �ndre partitionstabellen. (fejlen er %"
-"s)\n"
-"\n"
-"Er du indforst�et med at �del�gge alle partitionerne?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake kunne ikke l�se partitionstabellen korrekt. Forts�t p� eget ansvar!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Det er ikke plads for 1 MB bootstrap! Installationen vil forts�tte, men for "
-"at starte dit system op, skal du lave en bootstrap partition i DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Ingen rodpartition fundet til opgradering"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Rod-partition"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Hvilken partition indeholder systemets rod-partition (/)?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Du skal genstarte for at aktivere �ndringerne i partitionstabellen"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "V�lg partitioner der skal formateres"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Led efter beskadigede blokke?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formaterer partitioner"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Opretter og formaterer fil %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Ikke nok swap-plads til at gennemf�re installationen, tilf�j mere"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Leder efter tilg�ngelige pakker"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Leder efter pakker som skal opgraderes"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Dit system har ikke nok plads tilbage til en installation eller opgradering "
-"(%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Alting (%dMb)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%d Mb)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Anbefalet (%d Mb)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"V�lg indl�s eller gem pakkevalg p� diskette.\n"
-"Formatet er det samme som for auto_install-genererede disketter."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Indl�s fra diskette"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Indl�ser fra diskette"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Valg af pakker"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Inds�t en diskette med pakkevalget"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Gem p� diskette"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Valgt st�rrelse er st�rre end tilg�ngelig plads"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Installationstype"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Du har ikke valgt nogen gruppe af pakker.\n"
-"V�lg den minimale installation du �nsker"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Med X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Med basal dokumentation (anbefalet!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Virkelig minimal installation (specielt ingen urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Hvis du har alle cd'erne i listen nedenunder, klik Ok.\n"
-"Hvis du ikke har nogen af disse cd'er, klik Annull�r.\n"
-"Hvis kun nogen cd'er mangler, frav�lg dem, og klik s� Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cdrom med etikette '%s'"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Forbereder installationen"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installerer pakke %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Konfiguration efter installation"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Inds�t opstartsdisketten i diskette-drevet %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Inds�t Opdater moduler-disketten i drev %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Du har nu mulighed for at nedl�se programmel, der bruger kryptering.\n"
-"\n"
-"ADVARSEL:\n"
-"\n"
-"Grundet forskellige krav til programmel der bruger kryptering, og p�tvunget "
-"af forskellige lokale lovomr�der, b�r kunder og/eller slutbrugere af dette "
-"programmel sikre sig at lokale love fra dit/jeres lokalomr�de tillader dig/"
-"jer at nedl�se, gemme og/eller bruge dette programmel.\n"
-"\n"
-"Derudover skal kunder og/eller slutbrugere v�re opm�rksomme p� ikke at bryde "
-"lokale love fra dit/jeres lokalomr�de. Skulle en kunde og/eller slutbruger "
-"ikke respektere det lokale omr�des love, vil han/de blive udsat for seri�se "
-"sanktioner.\n"
-"\n"
-"Under ingen omst�ndigheder kan Mandrakesoft eller deres producenter og/eller "
-"leverand�rer holdes ansvarlig for speciel, indirekte eller tilf�ldig skade "
-"(inkluderet, men ikke begr�nset til tab af overskud, forretningsafbrydelser, "
-"tab af kommercielle data og andre pekuni�re tab, eventuelle risici og "
-"erstatninger der skal betales i overensstemmelse med retlig beslutning) som "
-"f�lge af brug, besiddelse eller nedl�sning af dette programmel, som kunder "
-"og/eller slutbrugere kunne f� adgang til efter at have accepteret denne "
-"aftale.\n"
-"\n"
-"\n"
-"For sp�rgsm�l om denne aftale, v�r venlig at kontakte \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Du har nu mulighed for at hente opdaterede pakker som er blevet udgivet\n"
-"efter distributionen blev gjort tilg�ngelig.\n"
-"\n"
-"Du vil f� sikkerhedsrettelser eller fejlrettelser, men du skal have en\n"
-"internet-opkobling for at forts�tte.\n"
-"\n"
-"�nsker du at installere opdateringerne?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Kontakter Mandrake Linux netsted for at hente listen over tilg�ngelige spejle"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "V�lg det spejl hvorfra pakkerne skal hentes"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kontakter spejlet for at hente listen af tilg�ngelige pakker"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Hvad er din tidszone?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Maskin-ur sat til GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatisk tidssynkronisering (ved hj�lp af NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP-server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Ekstern CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Ingen printer"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Har du et ISA-lydkort?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "K�r \"sndconfig\" efter installation for at konfigurere dit lydkort"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Intet lydkort genkendt. Pr�v at k�re  \"harddrake\" efter installation"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Oversigt"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mus"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Tidszone"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Internt ISDN-kort"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Lydkort"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-kort"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokale filer"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "S�t root-adgangskode"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Ingen adgangskode"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Dette kodeord er for nemt at g�tte (det skal mindst v�re p� %d tegn)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Identifikation"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Autentificering LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP grundl�ggende dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP-server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Autentificering NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS-dom�ne"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS-server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"En tilpasset opstartsdiskette lader dig starte Linux systemet op uden at "
-"v�re afh�ngig af den normale opstarter. Det kan v�re nyttigt, hvis du ikke "
-"vil installere SILO p� dit system - eller hvis et andet operativsystem "
-"fjerner SILO, eller hvis SILO ikke virker med dit maskinel. En tilpasset "
-"opstartsdiskette kan ogs� bruges sammen med Mandrakes `rescue image', "
-"hvilket g�r det meget nemmere at reparere systemet i tilf�lde af "
-"systemnedbrud.\n"
-"\n"
-"Hvis du �nsker at lave en opstartsdiskette til dit system, inds�t en "
-"diskette i dit f�rste diskettedrev og tryk 'Ok'."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "F�rste diskette-drev"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Andet diskette-drev"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Spring over"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"En tilpasset opstartsdiskette lader dig opstarte Linux systemet uden at v�re "
-"afh�ngig af den normale opstarter. Det kan v�re nyttigt, hvis du ikke vil "
-"installere LILO (eller grub) p� dit system - eller hvis et andet "
-"operativsystem fjerner LILO, eller hvis LILO ikke virker med din hardware. "
-"En tilpasset opstartsdiskette kan ogs� bruges sammen med Mandrakes `rescue "
-"image', hvilket g�r det meget nemmere at reparere systemet i tilf�lde af "
-"systemnedbrud. \n"
-"Vil du lave en opstartsdiskette til dit system?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(ADVARSEL! Du bruger XFS til din root-partition,\n"
-"oprettelse af en opstartsdiskette p� en 1.44 Mb diskette vil formentlig\n"
-"mislykkes, fordi XFS kr�ver en meget stor driver)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Der er desv�rre ikke noget tilg�ngeligt diskette-drev"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "V�lg det diskette-drev, du vil benytte til at lave boot-disketten"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Inds�t en diskette i %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Oprette opstartsdiskette"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Forbereder opstarter"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Det virker som om du har en OldWorld eller ukendt maskine, yaboot "
-"opstartsindl�seren vil ikke virke for dig. Installationen vil forts�tte, men "
-"du skal bruge BootX for at starte din maskine."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "�nsker du at bruge aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fejl ved installation af aboot, \n"
-"fors�g at gennemtvinge installation selv om dette kan �del�gge den f�rste "
-"partition?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Installerer systemopstarter"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installation af opstarter mislykkedes. Den f�lgende fejl opstod:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Du beh�ver m�ske at �ndre din �ben Firmware opstartsenhed for  at sl� "
-"systemstarteren til. Hvis du ikke ser systemstarter-beskeden ved genstart, "
-"s� hold Command-Option-O-F nede og indtast:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Skriv s�: shut-down\n"
-"Ved n�ste opstart burde du se systemstarteren."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inds�t en tom diskette i drev %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Laver autoinstallations-diskette"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Nogen dele af installationen er ikke f�rdig\n"
-"\n"
-"Er du sikker p� du �nsker du at lukke nu?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Tillykke, installationen er f�rdig.\n"
-"Fjern boot-mediet og tryk retur for at genstarte.\n"
-"\n"
-"\n"
-"For information om rettelser til denne udgivelse af Mandrake Linux, se "
-"Errata p�:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information om konfigurering af dit system kan du finde i kapitlet om efter-"
-"installation i den Officielle Mandrake Linux Brugervejledning."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Laver autoinstallations-diskette"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Autoinstallation kan ske fuldautomatisk hvis �nsket. I s� tilf�lde vil den "
-"overtage hele harddisken!! (dette er beregnet til at installere p� en anden "
-"maskine).\n"
-"\n"
-"Du foretr�kker m�ske at afspille installationen igen\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatisk"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Afspil igen"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Gem pakke-valg"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installation %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> mellem elementer  | <Space> v�lger  | <F12> n�ste sk�rm "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu mangler"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "konsolhj�lper mangler"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "V�lg en fil"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avanceret"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Basal"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Vent venligst"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Udvid tr�"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sammenfold tr�"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Skift mellem flad og gruppesorteret"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "D�rligt valg, pr�v igen\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Dit valg? (standard %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Indgange som du skal udfylde:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Dit valg? (0/1, standard '%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Knap '%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "�nsker du at klikke p� denne knap?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Dit valg? (standard '%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Der er mange ting at v�lge imellem (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"V�lg det f�rste tal i 10-omr�det som du �nsker at redigere,\n"
-"Eller tryk retur for at forts�tte.\n"
-"Dit valg? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Bem�rk, en etikette �ndredes:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Indsend igen"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tjekkisk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Tysk"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spansk"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finsk"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Fransk"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norsk"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polsk"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russisk"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Svensk"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Britisk"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Amerikansk"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albansk"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armensk (gammel)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armensk (skrivemaskine)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armensk (fonetisk)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidiansk (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgisk"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgarsk (fonetisk)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarsk (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliansk (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Hviderussisk"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Schweizisk (Tysk layout)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Schweizisk (Fransk layout)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tjekkisk (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Tysk (ingen d�de taster)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dansk"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (norsk)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (svensk)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estisk"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgisk (russisk layout)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgisk (Latin layout)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Gr�sk"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungarsk"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroatisk"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelsk"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelsk (Fonetisk)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iransk"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandsk"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiensk"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japansk 106 taster"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreansk tastatur"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinamerikansk"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litauisk AZERTY (gammel)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litauisk AZERTY (ny)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauisk \"talr�kke\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauisk \"fonetisk\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Lettisk"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonisk"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Hollandsk"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polsk (polsk layout)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polsk (polsk layout)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugisisk"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadisk (Qu�bec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Russisk (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Russisk (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russisk (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovensk"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakisk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakisk (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbisk (kyrillisk)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thailandsk"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik tastatur"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tyrkisk (traditionel \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tyrkisk (moderne \"Q\" model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrainsk"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Amerikansk (internaltionalt)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamesisk \"talr�kke\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavisk (latinsk)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "H�jre alt-tast"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Begge taster samtidigt"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Kontrol- og skiftetaster samtidigt"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock-tast"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl- og alt-taster samtidigt"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt og Shift-taster samtidigt"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "'Menu'-tast"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Venstre Windows-tast"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "H�jre Windows-tast"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirkul�re monteringer %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Fjern de logiske delarkiver f�rst\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA-underst�ttelse eksisterer ikke l�ngere for 2.2-kerner. Brug en 2.4-"
-"kerne."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun-mus"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Standard PS2 mus med hjul"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking-mus"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 knap"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Standard 2-knaps mus"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Standard"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Hjul"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriel"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Standard 3-knaps mus"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Serien (seriel)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Serien"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mus (seriel, gammel C7 type)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "Busmus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 knapper"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 knapper"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ingenting"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Ingen mus"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Test musen"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "For at aktivere musen,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "FLYT P� HJULET!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Afslut"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "N�ste ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Forrige"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Er dette korrekt?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Lav forbindelse til Internettet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Den mest almindelige m�de at forbinde med ADSL er pppoe.\n"
-"Nogen forbindelser bruger pptp, og nogle f� bruger DHCP.\n"
-"Hvis du ikke ved noget, v�lg 'brug pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "brug dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "brug pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "brug pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Hvilken DHCP klient �nsker du at bruge?\n"
-"Standard er dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Der blev ikke fundet nogen ethernet netv�rksadapter p� dit system.\n"
-"Kan ikke s�tte denne forbindelsetype op."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "V�lg netv�rksgr�nsesnit"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"V�lg hvilken netv�rksadapter du �nsker at bruge til at lave forbindelse til "
-"Internettet med."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "kunne ikke finde noget netkort"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfigurerer netv�rk"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Indtast dit v�rtsnavn hvis du kender det.\n"
-"Nogle DHCP-servere kr�ver v�rtsnavnet for at fungere.\n"
-"Dit v�rtsnavn b�r v�re et fuldt kvalificeret v�rtsnavn,\n"
-"fx 'minpc.mitfirma.dk'."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "V�rtsnavn"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Konfigur�r netv�rk"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Eksternt ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Internt ISDN-kort"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Hvad slags type er din ISDN-forbindelse?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Hvilken ISDN-konfigurering foretr�kker du?\n"
-"\n"
-"* Den gamle konfiguration bruger isdn4net. Det har st�rke\n"
-"  v�rkt�jer, men det er vanskeligt at konfigurere for en nybegynder,\n"
-"  og er ikke standardbaseret.\n"
-"\n"
-"' Det nye konfigurationsv�rkt�j er enklere at forst�,\n"
-"  mere standardiseret, men med f�rre v�rkt�jer.\n"
-"\n"
-"Vi anbefaler den nye konfiguration.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Ny konfiguration (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Gammel konfiguration (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN konfiguration"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"V�lg din udbyder.\n"
-" Hvis de ikke er i listen, v�lg Ikke listet"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europaprotokollen"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protokol for Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol for resten af verden"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol for resten af verden \n"
-" ingen D-kanal (lejet linje)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Hvilken protokol �nsker du at bruge?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Hvad slags kort har du?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Det ved jeg ikke"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Hvis du har et ISA kort burde v�rdiene i n�ste billede v�re rigtige.\n"
-"\n"
-"Hvis du har et PCMCIA kort skal du vide irq og io for kortet.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Afbryd"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Forts�t"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Hvilket er dit ISDN-kort?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Jeg har opdaget et ISDN PCI-kort, men jeg ved ikke hvilken type. V�lg et PCI-"
-"kort i n�ste sk�rmbillede."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ingen ISDN PCI-kort fundet. V�lg �t i n�ste sk�rmbillede."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Angiv hvilken seriel port dit modem er forbundet til."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opkaldsindstillinger"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Navn p� forbindelsen"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonnummer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Brugernavn"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skript-baseret"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal-baseret"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Dom�nenavn"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "F�rste DNS-server (valgfri)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Anden DNS-server (valgfri)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan lukke forbindelsen til Internettet eller genkonfigurere din "
-"forbindelse."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan genkonfigurere din forbindelse"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Du har forbindelse til Internettet nu."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan lave forbindelse til Internettet eller omkonfigurere din forbindelse."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Du er ikke forbundet til Internettet nu."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Tilslut"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Afbryd"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Konfigur�r forbindelsen"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internetforbindelse & -konfiguration"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Vi skal nu konfigurere opkoblingen '%s'."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Vi skal nu konfigurere opkoblingen '%s'.\n"
-"\n"
-"\n"
-"Tryk OK for at begynde."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Konfigur�r netv�rk"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Da du er i gang med en netv�rksinstallation er dit netv�rk allerede "
-"konfigureret.\n"
-"Klik OK for at beholde din konfiguration, eller annull�r for at "
-"omkonfigurere din Internet- og netv�rksforbindelse.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Velkommen til Netv�rkskonfigurations-vejlederen\n"
-"\n"
-"Vi skal til at konfigurere din internet- eller netv�rksforbindelse.\n"
-"Hvis du ikke �nsker at bruge autodetektering, s� frav�lg afkrydsningsboksen\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "V�lg profilen der skal konfigureres"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Brug automatisk detektion"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detekterer enheder..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normal modemforbindelse"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "Detekteret p� port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN-forbindelse"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "Detekteret %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL opkobling"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "Detekteret p� gr�nseflade %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabelforbindelse"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Kabelopkobling detekteret"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Lokalnet-konfiguration"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet-kort detekteret"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "V�lg den opkobling, du �nsker at konfigurere"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Du har konfigureret flere m�der at koble dig mod internet p�.\n"
-"Venligst v�lg den du �nsker at bruger.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet opkobling"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "�nsker du at starte din forbindelse ved opstart?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Netv�rks konfiguration"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Netv�rket skal startes op igen"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Et problem opstod ved genstart af netv�rket: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Tillykke, netv�rks- og internetkonfigurationen er f�rdig.\n"
-"Konfigurationen vil nu blive anvendt p� dit system.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Derefter anbefaler vi at du genstarter dit X-milj� for\n"
-"at undg� problemer med det �ndrede v�rtsnavn"
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Problemer indtraf under konfigurationen.\n"
-"Afpr�v din forbindelse med net_monitor eller mcc. Hvis din forbindelse ikke "
-"virker, kan du pr�ve at genstarte konfigurationen."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ADVARSEL: Denne enhed er tidligere blevet konfigureret til at lave "
-"forbindelse til Internettet.\n"
-"Ved kun at trykke p� OK beholder du den nuv�rende konfiguration.\n"
-"�ndringer i felterne nedenunder vil overskrive denne konfiguration."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Indtast IP konfigurationen for denne maskine. Hvert felt skal udfyldes\n"
-"med en IP adresse i `dotted-decimal' notation (for eksempel 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurerer netv�rksenheden %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (drivprogram %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-adresse"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmaske"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatisk IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresse skal have formatet 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Indtast dom�nenavn, v�rtsnavn og IP adressen for evt. ekstra navne-servere.\n"
-"Dit v�rtsnavn skal v�re et fuldt kvalificeret v�rtsnavn inklusive dom�ne,\n"
-"f.eks. minpc.mitfirma.dk. Hvis du ikke har nogen ekstra navne-servere,\n"
-"s� lad navne-server-felterne v�re blanke."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS-server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (fx %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway enhed"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Konfiguration af mellemv�rt (proxy)"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP-proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "F�lg id for netv�rkskort (nyttigt for b�rbare)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy skal v�re http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy skal v�re ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet-konfiguration"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "�nsker du at fors�ge at skabe forbindelse til Internettet nu?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Tester din forbindelse..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Systemet er ikke forbundet til Internettet nu."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Af sikkerhedsgrunde vil det blive afbrudt nu."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Det lader ikke til at dit system har forbindelse til Internettet.\n"
-"Pr�v at omkonfigurere din forbindelse."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Forbindelses-konfiguration"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Udfyld eller mark�r feltet nedenunder"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kort IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kort mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kort IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kort IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kort IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Dit personlige telefonnummer"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Navn p� udbyder (f.eks. udbyder.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Udbyders telefonnummer"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Udbyder DNS 1 (valgfri)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Udbyder DNS 2 (valgfri)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "V�lg dit land"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Opringningsm�de"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Opkoblingshastighed"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Opkoblingens tidsudl�b (i sekunder)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Konto-login (brugernavn)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Kodeord for konto"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montering mislykkedes: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Udvidet partition ikke underst�ttet p� denne platform"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Du har plads tilovers i din partitionstabel, men jeg kan ikke udnytte den.\n"
-"Den eneste l�sning er at flytte dine prim�re partitioner, s�ledes at\n"
-"\"hullet\" bliver placeret ved siden af de udvidede partitioner."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Genskabning fra fil %s mislykkedes: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Fejl i sikkerhedskopien"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fejl ved skrivning til fil %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Noget slemt sker p� dit drev. \n"
-"En test for at tjekke integriteten af data er mislykkedes. \n"
-"Dette betyder at alt p� disken vil ende som tilf�ldigt snavs"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "skal have"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "vigtigt"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "meget rart"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "rart"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "m�ske"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer D�mon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokal printer"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Ekstern printer"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Printer p� ekstern CUPS server"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Printer p� ekstern lpd server"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Netv�rksprinter (TCP/sokkel)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Printer p� SMB/Windows 95/98/NT server"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Printer p� en NetWare server"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Indtast en printerenheds-URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "kanalis�r opgave ind i kommando"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Ukendt model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokale printere"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Eksterne printere"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " p� parallelport \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB printer \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", multi-funktions-enhed p� parallel port \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", multi-funktions-enhed p� USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multi-funktions-enhed p� HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", multi-funktions-enhed"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", skriver til %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "p� LPD-server \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP v�rt \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "p� Windows-server \"%s\", deling \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "p� Novell-server \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", med kommando %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "R� printer (ingen driver)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(p� %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(p� denne maskine)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "P� CUPS-server '%s'"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Forvalgt)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "V�lg printer-forbindelse"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hvordan er printeren tilsluttet?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Eksterne CUPS-servere beh�ver du ikke at konfigurere her: \n"
-"disse printere vil automatisk blive fundet."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS-Konfiguration"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Angiv CUPS server"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Du beh�ver ikke at konfigurere nogen printere h�r for at f� adgang til "
-"eksterne CUPS-servere; CUPS-serverne informerer automatisk din maskine "
-"information om deres printere. Alle printere som for �jeblikket er kendt af "
-"din maskine vil v�re opf�rt under \"Eksterne printere\". N�r CUPS-serveren "
-"ikke er p� dit lokalnetv�rk skal du opgive CUPS-serverens IP-adresse og "
-"eventuelle portnummer for at f� printerinformation fra serveren, ellers kan "
-"du lade disse felter v�re blanke."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalt bliver CUPS konfigureret automatisk i overensstemmelse med dit "
-"netv�rksmilj�, s� du kan f� fat i printerne p� CUPS-serverne p� dit "
-"lokalnetv�rk. Hvis dette ikke virker ordentligt, s� deaktiv�r 'Automatisk "
-"CUPS-konfiguration' og redig�r din fil /etc/cups/cupsd.conf selv. Glem ikke "
-"at genstarte CUPS bagefter. (kommando: 'service cups restart')."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adressen b�r se ud som 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Port-nummeret b�r v�re et heltal!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-serverens IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatisk CUPS-konfiguration"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "S�ger efter enheder..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Afpr�v porte"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Tilf�j en ny printer"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Velkommen til vejlederen for printerops�tning\n"
-"\n"
-"Denne vejleder lader dig installere lokale eller eksterne printere som skal "
-"bruges fra denne maskine, og ogs� fra andre maskiner i netv�rket.\n"
-"\n"
-"Den sp�rger dig om alle n�dvendige oplysninger til at ops�tte printere og "
-"giver dig adgang til alle tilg�ngelige printerdrivere, drivermuligheder og "
-"opkoblingstyper for printere."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokal printer"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Velkommen til vejlederen for printerops�tning\n"
-"\n"
-"Denne vejleder vil hj�lpe dig med at installere dine printere tilsluttet "
-"denne maskine.\n"
-"\n"
-"Tilslut dine printere til maskinen og t�nd dem. Klik p� \"N�ste\" n�r du er "
-"klar, eller p� \"Annull�r\" hvis du ikke vil ops�tte dine printere nu.\n"
-"\n"
-"Bem�rk at nogen maskiner kan g� ned under den automatiske s�gning efter "
-"printere; sl� 'Auto-opdagelse af printere' fra for at lave en printer "
-"installation uden auto-s�gning. Brug printerdrakes 'Ekspert-udgave' hvis du "
-"�nsker at ops�tte udskrift p� en ekstern printer og Printerdrake ikke lister "
-"denne automatisk."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Auto-opdagelse af printere"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Tillykke, din printer er nu installeret og konfigureret!\n"
-"\n"
-"Du kan udskrive med 'Udskriv'-kommandoen i dit program (normalt i 'Filer'-"
-"menuen).\n"
-"\n"
-"Hvis du �nsker at tilf�je, fjerne eller omd�be en printer, eller hvis du "
-"�nsker at �ndre p� standard-indstillingerne (papirbakke, printkvalitet ...), "
-"s� v�lg 'Printer' i 'Udstyr'-afsnittet i Mandrake Kontrolcentret."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Auto-opdagelse af printere"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake er i stand til at automatisk opdage dine lokalt forbundne "
-"parallelle og USB-printere for dig, men bem�rk at p� nogen systemer KAN DEN "
-"AUTOMATISKE OPDAGELSE FRYSE DIT SYSTEM OG ENDOG �DEL�GGE DINE FILSYSTEMER! "
-"S� g�r det p� EGET ANSVAR!\n"
-"\n"
-"�nsker du virkeligt at f� dine printere automatisk opdaget?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Udf�r automatisk detektion"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Ops�t printer manuelt"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Fandt %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Printer p� parallel port \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB-printer \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Ingen lokal printer fundet! For at installere en printer i h�nden skal du "
-"indtaste et enhedsnavn/filnavn i inddatalinjen (parallelporte: /dev/lp0, /"
-"dev/lp1  ..., svarende til LPT1:, LPT2: ..., f�rste USB-printer: /dev/usb/"
-"lp0, 2. USB-printer: /dev/usb/lp1 ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Du skal indtaste en enhed eller et filnavn!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Ingen lokal printer fundet!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Netv�rksprintere kan kun installeres efter installeringen. V�lg 'Udstyr' og "
-"dern�st 'Printer' i Mandrake kontrolcentret."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"For at installere netv�rksprintere skal du klikke p� 'Annull�r', skifte til "
-"'Ekspert-version' og klikke p� 'Tilf�j en ny printer' igen."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Den f�lgende printer blev opdaget automatisk. Hvis det ikke er den du �nsker "
-"at ops�tte s� indtast et enhedsnavn/filnavn p� inddatalinjen"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Her er en liste over alle automatisk opdagede printere. V�lg den printer du "
-"�nsker at ops�tte eller indtast et enhedsnavn/filnavn p� inddatalinjen"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Den f�lgende printer blev opdaget automatisk. Konfigurationen af printeren "
-"vil ske fuldst�ndigt automatisk. Hvis din printer ikke blev fundet korrekt "
-"eller hvis du foretr�kker en tilpasset printerkonfiguration, s� sl� 'Manuel "
-"konfiguration' til."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Her er en liste over alle automatisk opdagede printere. V�lg den printer du "
-"�nsker at ops�tte. Konfigurationen af printeren vil ske fuldst�ndigt "
-"automatisk. Hvis din printer ikke blev fundet korrekt eller hvis du "
-"foretr�kker en tilpasset printerkonfiguration, s� sl� 'Manuel konfiguration' "
-"til."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Angiv hvilken port din printer er forbundet til eller indtast et enhedsnavn/"
-"filnavn p� inddatalinjen"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Angiv hvilken port din printer er forbundet til."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(parallelporte: /dev/lp0, /dev/lp1  ..., svarende til LPT1:, LPT2: ..., "
-"f�rste USB-printer: /dev/usb/lp0, 2. USB-printer: /dev/usb/lp1 ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Du skal v�lge eller indtaste en printer/enhed!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Manuel konfiguration"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Er din printer en multi-funktionsenhed fra HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 med skanner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Installerer HPOJ-pakke..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Tjekker enhed og konfigurerer HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Installerer SANE-pakke..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skanner p� din HP multi-funktionsenhed"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "G�r printerport tilg�ngelig for CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "L�ser database over printere ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Parametre til ekstern lpd"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"For at bruge en ekstern printer, skal du opgive v�rtsnavnet\n"
-"for printerserveren og navnet p� printeren p� denne server."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Eksternt v�rtsnavn"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Eksternt printernavn"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Eksternt v�rtsnavn mangler"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Det eksterne v�rtsnavn mangler!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT)-printer indstillinger"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"For at skrive til en SMB printer skal du angive v�rtsnavnet p� SMB maskinen "
-"(bem�rk at dette navn kan v�re forskelligt fra TCP/IP-navnet!) og muligvis "
-"IP-adressen p� printerserveren, s� vel som delenavnet for printeren du vil "
-"bruge samt n�dvendig information om brugernavn, adgangskode og arbejdsgruppe."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB-serverv�rt"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB-serverens IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Dele-navn"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Arbejdsgruppe"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Enten servernavnet eller serverens IP skal angives!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Samba-delenavn mangler!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "SIKKERHEDSADVARSEL!"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Du er ved at ops�tte udskrivning til en Windows-konto med adgangskode. "
-"Grundet en fejl i arkitekturen af Sambas klientprogrammel bliver "
-"adgangskoden lagt i klar tekst i Samba-klientens kommandolinje, som bruges "
-"til at sende printjobbet til Windows-serveren. S� det er muligt for enhver "
-"bruger p� denne maskine at vise adgangskoden p� sk�rmen ved at angive "
-"kommandoer som 'ps auxwww'.\n"
-"\n"
-"Vi anbefaler at bruge en af de f�lgende alternativer (i alle tilf�lde skal "
-"du forsikre dig om at kun maskiner fra dit lokalnetv�rk har adgang til din "
-"Windows-server, for eksempel ved hj�lp af en brandmur):\n"
-"\n"
-"Brug en konto uden adgangskode p� din Windows-server, s�som 'GUEST'-kontoen "
-"eller en speciel konto som kun anvendes til udskrift. Fjern ikke "
-"adgangskodebeskyttelsen fra en personlig konto eller en administrator-"
-"konto.\n"
-"\n"
-"Ops�t din Windows-server s� printeren er tilg�ngelig under LPD-protokollen. "
-"Ops�t dern�st udskrift fra denne maskine med '%s'-opkoblingstypen i "
-"Printerdrake.\n"
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Ops�t din Windows-server til at g�re printeren tilg�ngelig under IPP-"
-"protokollen, og ops�t udskrift fra denne maskine med '%s'-opkoblingstypen i "
-"Printerdrake.\n"
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Forbind din printer til en Linux-server og lad dine Windows-maskiner "
-"tilslutte sig til den som klienter.\n"
-"\n"
-"�nsker du virkelig at forts�tte med at ops�tte din printer som du g�r nu?"
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare printer-parametre"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"For at skrive til en NetWare printer skal du angive navnet p� NetWare "
-"printerserveren (bem�rk at dette navn kan v�re forskelligt fra TCP/IP-"
-"navnet!) s�vel som k�navnet for den printer du vil benytte samt om "
-"n�dvendigt et brugernavn og en adgangskode."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printer-server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Printerk�-navn"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP-servernavn mangler!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP-k�navn mangler!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Sokkel-printer-parametre"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"For at skrive til en TCP eller sokkel-printer skal du angive v�rtsnavnet p� "
-"printeren, og eventuelt portnummer. P� HP JetDirect-servere er portnummeret "
-"normalt 9100, p� andre servere varierer det. Tjek manualen for dit udstyr."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "printer-v�rtsnavn"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "printer-v�rtsnavn mangler!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Printer-enheds URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Du kan direkte opgive URI til printeren. URIen skal v�re i henhold til enten "
-"CUPS- eller Foomatic-standarden. Bem�rk at ikke alle typer URIer "
-"underst�ttes af alle k�-behandlere."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "En korrekt URI skal opgives!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Alle printere beh�ver et navn (f.eks. 'printer').\n"
-"Beskrivelsen og lokaliseringsfelterne beh�ver ikke \n"
-"udfyldes. De er kommentarer til brugerne."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Navn p� printer"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Beskrivelse"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Placering"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Forbereder printerdatabase: ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Din printermodel"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake har sammenlignet modelnavnet fra den automatiske genkendelse af "
-"printeren med modellerne listet i dens printerdatabase for at finde den "
-"bedste match. Dette valg kan v�re forkert, is�r n�r din printer slet ikke er "
-"listet i databasen. S� tjek om valget er korrekt og klik \"Modellen er "
-"korrekt\" hvis den er, og hvis ikke s� klik \"V�lg model manuelt\" s� du kan "
-"udv�lge din printermodel manuelt p� den n�ste sk�rm.\n"
-"\n"
-"Som din printer har Printerdrake fundet:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Modellen er korrekt"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "V�lg model manuelt"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Valg af printermodel"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Hvilken printermodel har du?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Tjek venligst om Printerdrake udf�rte \n"
-"autodetekteringen af din printermodel\n"
-"korrekt. Ops�g den korrekte model i listen\n"
-"n�r mark�ren st�r p� en forkert model, eller\n"
-"p� 'R� printer'."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Hvis din printer ikke er listet, s� v�lg en kompatibel (se printermanual) "
-"eller en lignende printer."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI konfiguration af winprinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Du konfigurerer en OKI laser-winprinter. Disse printere bruger en meget "
-"speciel kommunikationsprotokol og derfor virker de kun n�r de er forbundet "
-"til den f�rste parallelle port. N�r din printer er forbundet til en anden "
-"port eller til en printserverboks, s� forbind printeren til den f�rste "
-"parallelle port f�r du udskriver en pr�veside. Ellers vil printeren ikke "
-"virke. Din ops�tning af forbindelsestype vil blive ignoreret af driveren."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet konfiguration"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Printerdriverne til inkjet som leveres af Lexmark underst�tter kun lokale "
-"printere, ikke printere p� eksterne maskiner eller printserverbokse. Forbind "
-"din printer til en lokal port eller konfigur�r den p� den maskine, den er "
-"forbundet til."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"For at kunne udskrive p� din Lexmark inkjet fra denne konfigurering skal du "
-"bruge inkjet printerdriverne leveret af Lexmark (http://www.lexmark.com/). "
-"G� til webstedet i USA og klik p� 'Drivers'-knappen. V�lg s� din model og "
-"derefter 'Linux' som operativsystem. Driverne kommer som RPM-pakker eller "
-"skal-skripter med interaktiv grafisk installation. Du beh�ver ikke lave "
-"denne konfiguration via de grafiske gr�nseflader. Annull�r direkte efter "
-"licensaftalen. Udskriv derefter justeringsider for skrivehovedet med "
-"'lexmarkmaintain', og just�r ops�tningen af justeringen af hovedet med dette "
-"program."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Standardprinterens indstillinger\n"
-"\n"
-"Du b�r tjekke at sidest�rrelsen og bl�ktypen/udskriftstilstanden (hvis til "
-"stede) og ogs� konfigurationen af laserprinterudstyr (hukommelse, duplex-"
-"enhed, ekstra bakker) er sat rigtigt. Bem�rk at en meget god "
-"udskriftskvalitet kan g�re udskriften betydeligt langsommere."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Valg %s skal v�re et helt tal!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Valg %s skal v�re et tal!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Valg %s er udenfor omr�de!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"�nsker du fremover at bruge printeren \"%s\"\n"
-"som standard?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testsider"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"V�lg testsiderne du �nsker at udskrive.\n"
-"Bem�rk: fototestsiden kan tage ret lang tid at skrive ud, og p� "
-"laserprintere med for lidt hukommelse vil den m�ske ikke skrives ud i det "
-"hele taget. Som regel vil det v�re nok at udskrive standard-testsiden."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Ingen testsider"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Udskriv"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standard testside"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternativ testside (letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternativ testside (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Fototestside"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Udskriv ikke nogen testsider"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Udskriver testsider..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testsider er blevet sendt til printeren.\n"
-"Dette kan tage lidt tid f�r printeren starter.\n"
-"Udskrivningsstatus:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testsider er sendt til printeren.\n"
-"Det kan tage lidt tid f�r printeren starter.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Fungerer det korrekt?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "R� printer"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"For at skrive en fil fra kommandolinjen (terminalvinduet) kan du enten bruge "
-"programmet '%s <fil>' eller et grafisk printerv�rkt�j: 'xpp <fil>' eller "
-"'kprinter <fil>'. De grafiske v�rkt�jer lader dig v�lge printeren og �ndre "
-"indstillingerne p� en nem m�de.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Disse kommandoer kan du ogs� bruge fra 'udskrivningskommando'-feltet i "
-"udskriftsdialogerne i mange programmer, men lad v�re med at angive filnavnet "
-"her, fordi filen der skal udskrives leveres af programmet.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"'%s'-kommandoen tillader ogs� �ndring af indstillingsmulighederne for et "
-"bestemt udskriftsjob. Tilf�j blot de �nskede indstillinger til "
-"kommandolinjen, fx '%s <fil>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Hvilke muligheder der er for den aktuelle printer kan du enten l�se p� "
-"listen vist nedenfor, eller klikke p� knappen 'liste med printermuligheder'%"
-"s.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Her er en liste over tilg�ngelige printmuligheder for den aktuelle printer:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
-"kommandoen '%s <fil>'.\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Denne kommando kan du ogs� bruge fra 'udskrivningskommando'-feltet i "
-"udskriftsdialogerne i mange programmer, men lad v�re med at angive filnavnet "
-"her, fordi filen der skal udskrives leveres af programmet.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"For at f� en liste af tilg�ngelige muligheder for den aktuelle printer kan "
-"du klikke p� knappen 'Liste med printermuligheder'."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
-"kommandoen '%s <fil>' eller '%s <fil>'.\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Du kan ogs� bruge den grafiske gr�nseflade 'xpdq' til at s�tte "
-"valgmuligheder og behandle udskriftsopgaver.\n"
-"Hvis du bruger KDE som skrivebordsmilj�, har du en 'panik-knap', en ikon p� "
-"skrivebordet, ben�vnt med 'STOP printer!', som stopper alle udskriftsopgaver "
-"�jeblikkeligt n�r du klikker p� den. Dette er fx nyttigt hvis papiret "
-"kr�ller sammen.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"'%s'- og '%s'-kommandoerne tillader ogs� �ndring af indstillingsmulighederne "
-"for et bestemt udskriftsjob. Tilf�j blot de �nskede indstillinger til "
-"kommandolinjen, fx '%s <fil>'.\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Luk"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Udskriver eller skanner p� '%s'"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Udskriver p� printeren '%s'"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Liste med printermuligheder"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Din HP-multifunktionsenhed blev konfigureret automatisk til at kunne skanne. "
-"Nu kan du skanne med 'scanimage' ('scanimage -d hp:%s' for at angive "
-"skanneren hvis du har mere end �n) fra kommandolinjen eller med den grafiske "
-"gr�nseflade 'xscanimage' eller 'xsane'. Hvis du bruger GIMP kan du ogs� "
-"skanne ved at v�lge det passende punkt i menuen 'Filer/Hent'. Brug ogs� 'man "
-"scanimage' og 'man sane-hp' p� kommandolinjen for at f� mere information\n"
-"\n"
-"Brug ikke \"scannerdrake\" p� denne enhed!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Din HP-multifunktionsenhed blev konfigureret automatisk til at kunne skanne. "
-"Nu kan du skanne med 'ptal-hp %s scan ...' fra kommandolinjen. Skanning via "
-"en grafisk gr�nseflade eller fra GIMP er endnu ikke underst�ttet for din "
-"enhed. Du kan finde mere information i filen \"/usr/share/doc/hpoj-0.8/ptal-"
-"hp-scan.html\" p� dit system. Hvis du har en HP LaserJet 1100 eller 1200 kan "
-"du kun skanne n�r du har skannermuligheden installeret p� udstyret.\n"
-"\n"
-"Brug ikke \"scannerdrake\" p� denne enhed!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "L�ser printerdata ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Overf�r printerkonfiguration"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Du kan kopiere printerkonfigurationen du har sat op for k�serveren %s til %"
-"s, din nuv�rende k�server. Al konfigurationsdata (printernavn, beskrivelse, "
-"opkoblingstype og standardindstillinger) bliver overtaget, men ikke "
-"opgaver.\n"
-"Ikke alle k�er kan overf�res p� grund af:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS underst�tter ikke printere p� Novellservere eller printere som sender "
-"dataene ind i en frit-formet kommando.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ underst�tter kun lokale printere, eksterne LPD printere, og Sokkel/TCP "
-"printere.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD og LPRng underst�tter ikke IPP printere.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Desuden kan k�er lavet med dette program eller \"foomatic -configure\" ikke "
-"overflyttes."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Printere konfigureret med PPD-filerne, som producenten har lavet, eller med "
-"CUPS egne drivere kan heller ikke overflyttes."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"V�lg printerene som du vil overflytte og klik\n"
-"\"Overf�r\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Overf�r ikke printere"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Overf�r"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"En printer med navnet \"%s\" eksisterer allerede p� %s. \n"
-"Klik \"Overf�r\" for at overskrive.\n"
-"Du kan ogs� give et nyt printernavn, eller overspringe denne printer."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Navn p� printer b�r kun indeholde bogstaver, tal og understregen _"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Printeren \"%s\" eksisterer allerede,\n"
-"�nsker du virkelig at overskrive dens konfiguration?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nyt printernavn"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Overf�rer %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Du har overf�rt din tidligere standard-printer '%s', skal den ogs� v�re "
-"standard-printer under det nye printersystem %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Opfrisker printerdata ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Konfiguration af en ekstern printer"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Starter netv�rk ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Konfigur�r netv�rket nu"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Netv�rksfunktionalitet ikke konfigureret"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Du er ved at konfigurere en ekstern printer. Dette kr�ver en virkende "
-"netv�rksadgang, men dit netv�rk er endnu ikke konfigureret. Hvis du vil "
-"forts�tte uden en netv�rkskonfiguration, vil du ikke kunne bruge printeren "
-"som du konfigurerer nu. Hvordan �nsker du at forts�tte?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Forts�t med konfigurering af netv�rk"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Netv�rksops�tningen lavet under installationen kan ikke startes nu. Tjek om "
-"netv�rket bliver tilg�ngeligt efter opstart af dit system, og ret "
-"konfigurationen med Mandrake Kontrolcenter, afsnittet 'Netv�rk og internet'/ "
-"'Forbindelse', og konfigur�r derefter printeren ogs� med Mandrake "
-"Kontrolcenter, afsnittet om 'Maskinel'/'Printer'"
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Netv�rksadgangen k�rte ikke og kunne ikke startes. Tjek din konfiguration og "
-"dit udstyr. Pr�v derefter at konfigurere din eksterne printer igen."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Genstarter printsystemet ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "h�j"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoid"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installerer et printersystem p� sikkerhedsniveauet %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Du er ved at installere printsystemet %s p� et system k�rende p� "
-"sikkerhedsniveau %s.\n"
-"\n"
-"Dette printsystem k�rer som en d�mon (baggrundsproces) som venter p� "
-"printeropgaver og behandler dem. Denne d�mon er ogs� tilg�ngelig for "
-"eksterne maskiner via netv�rket, og derfor er det et muligt angrebspunkt. "
-"Derfor bliver kun nogle f� udvalgte d�moner startet op som standard i dette "
-"sikkerhedsniveau.\n"
-"\n"
-"�nsker du virkelig at konfigurere udskrivning p� denne maskine?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Starter printsystemet ved opstart"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Printsystemet (%s) vil ikke blive startet automatisk, n�r maskinen startes "
-"op.\n"
-"Det er muligt at den automatiske opstart blev sl�et fra ved �ndring til et "
-"h�jere sikkerhedsniveau, fordi printsystemet er et muligt angrebspunkt.\n"
-"\n"
-"�nsker du at have den automatiske opstart af printsystemet sl�et til igen?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Tjekker installeret programmel..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Fjerner LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Fjerner LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "V�lg printerk�-behandler"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hvilket printersystem (spooler) �nsker du at bruge?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurerer printer '%s'..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Installerer Foomatic..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Printer-muligheder"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Forbereder PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Konfigurerer programmer..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Vil du gerne konfigurere udskrivning?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Printsystem: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"De f�lgende printere er konfigureret. Dobbeltklik p� en printer for at �ndre "
-"dens indstillinger; for at g�re den til standard-printer: for at se "
-"information om den; eller for at g�re en ekstern CUPS-printer tilg�ngelig "
-"for Star Office/OpenOffice.org.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"De f�lgende printere er konfigureret. Dobbeltklik p� en printer for at �ndre "
-"dens indstillinger, for at g�re den til standard-printer, eller for at se "
-"information om den."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Opfrisk printerliste (for at vise alle tilg�ngelige eksterne CUPS-printere)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "�ndr printsystemet"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normal udgave"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "�nsker du at konfigurere en anden printer?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "�ndr printerkonfiguration"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Printer %s\n"
-"Hvad �nsker du at forandre p�, p� denne printer?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "G�r det!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Printeropkoblingstype"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Printernavn, beskrivelse, sted"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Printerproducent, model, driver"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Printerproducent, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "S�t printeren som standard-printer"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Tilf�j denne printer til Star Office/OpenOffice.org.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Fjern denne printer fra Star Office/OpenOffice.org.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Udskriver testsider"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "V�d hvordan denne printer bruges"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Fjern printer"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Fjerner gammel printer \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Standard printer"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Printeren '%s' er nu sat som standard-printer."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Tilf�jer printer til Star Office/OpenOffice.org.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Printeren \"%s\" blev tilf�jet til Star Office/OpenOffice.org.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-"Kunne ikke tilf�je printeren \"%s\" til Star Office/OpenOffice.org.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Fjerner printer fra Star Office/OpenOffice.org.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "Printeren \"%s\" blev fjernet fra Star Office/OpenOffice.org.org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Kunne ikke fjerne printeren \"%s\" fra Star Office/OpenOffice.org.org."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "�nsker du virkelig at fjerne printeren \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Fjerner printer \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Konfiguration af proxy (mellemv�rt)"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Velkommen til programmet for proxy-konfigurering.\n"
-"\n"
-"Her vil du kunne ops�tte dine http- og ftp-proxyer\n"
-"med eller uden brugernavn og adgangskode\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Udfyld venligst oplysningerne om http-proxy\n"
-"Lad det v�re blankt hvis du ikke �nsker en http-proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url burde begynde med 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Port-delen b�r v�re numerisk"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Udfyld venligst oplysningerne om ftp-proxy\n"
-"Lad det v�re blankt hvis du ikke �nsker en ftp-proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url burde begynde med 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Indtast brugernavn og adgangskode p� proxy, hvis n�dvendigt.\n"
-"Lad det v�re blankt hvis du ikke �nsker brugernavn/adgangskode"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "brugernavn"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "adgangskode"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "genindtast adgangskode"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Adgangskoderne stemmer ikke overens. Pr�v igen!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan ikke tilf�je en partition til _format�ret_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan ikke skrive filen %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid fejlede"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid fejlede (m�ske mangler raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ikke nok partitioner til at benytte RAID level %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystemet"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron en periodisk kommando planl�gger"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd bruges til at overv�ge batteristatus og skrive log til syslog.\n"
-"Den kan ogs� bruges til at lukke maskinen n�r batteriet er p� lav."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"K�rer planlagte kommandoer med 'at' kommandoen p� tiden specificeret da 'at' "
-"blev k�rt, og k�rer batch kommandoer n�r den gennemsnitlige systembelastning "
-"er lav nok"
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron er et standard UNIX program der k�rer bruger-specifikke programmer p� "
-"planlagte tidspunkter. Vixie cron tilf�jer en del forbedringer til den "
-"basale UNIX cron, inklusive bedre sikkerhed og st�rkere "
-"konfigurationsmuligheder."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM tilf�jer muse-support til tekst-baserede Linux applikationer s�som "
-"Midnight Commander. Den tillader muse-baseret kopi�r-og-s�tind operationer "
-"p� konsollen og inkluderer support for pop-op-menuer i konsollen."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake k�rer en s�gning efter maskinel, og kan konfigurere nyt/�ndret "
-"maskinel."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache er en webserver.  Den bruges til at betjene HTML-filer og CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver-d�monen (kaldet inetd) starter forskellige internet-"
-"tjenester efter behov. Den er ansvarlig for at starte tjenester som telnet, "
-"ftp, rsh og rlogin. Hvis inetd deaktiveres, deaktiveres alle de tjenester, "
-"den er ansvarlig for."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Start pakkefiltrering for Linux kerne 2.2 serien for at ops�tte en brandmur "
-"til at beskytte din maskine mod netv�rksangreb."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Denne pakke indl�ser den valgte tastatur-tabel, som valgt i /etc/sysconfig/"
-"keyboard. Dette kan v�lges i kbdconfig programmet. Dette b�r v�re sl�et til "
-"p� de fleste maskiner."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatisk regenerering af kernehoved i /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "automatisk opdagelse og konfigurering af maskinel ved opstart."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf vil nogen gange arrangere udf�relse af forskellige opgaver ved "
-"opstart for at vedligeholde systemkonfigurationen."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd er printer-d�monen som er n�dvendig for at lpr virker.\n"
-"Den er basalt en server der h�ndterer udskrifts-opgaver."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtuel Server, brugt til at bygge en server med h�j ydelse og\n"
-"tilg�ngelighed."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) er en dom�ne-navneserver (DNS) der bruges til opslag af IP-"
-"adresser for v�rtsnavne."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monterer og afmonterer alle netv�rks filsystemer (NFS), SMB (LanManager/"
-"Windows) og NCP (NetWare) monterings-stier"
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiverer/deaktiverer alle netv�rks-kort som er konfigureret\n"
-"til at starte ved opstart"
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS er en popul�r protokol til fildeling over TCP/IP netv�rk.\n"
-"Denne tjeneste giver NFS-serverfunktionalitet, som konfigureres gennem /etc/"
-"exports filen"
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS er en popul�r protokol til fildeling over TCP/IP\n"
-"netv�rk. Denne service giver NFS fill�snings funktionalitet"
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Aktiverer automatisk numlock-tast i konsol og XFree ved\n"
-"opstart."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "St�tter OKI 4w og kompatible winprintere."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA underst�ttelse er normalt til at underst�tte ting som ethernet og "
-"modemer p� b�rbare.  Den vil ikke blive startet medmindre den er "
-"konfigureret, s� det er sikkert at have den installeret p� maskiner der ikke "
-"har behov for den."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper h�ndterer RPC tilslutninger, som bliver brugt af protokoller som "
-"NFS og NIS. Portmap serveren skal k�re p� maskiner som bruger protokoller "
-"der udnytter RPC mekanismen"
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix er en transport-agent for post, som bruges af programmer der flytter "
-"post fra en maskine til en anden."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Gemmer og henter systemets entropip�l for en h�jre kvalitet\n"
-"ved generering af tilf�ldige tal."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Tilordn r� enheder til blokenheder (som harddisk-\n"
-"partitioner) til brug af applikationer som Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed d�monen giver mulighed for automatisk IP rutetabel opdatering via RIP "
-"protokollen. RIP kan bruges til sm� netv�rk, men n�r det kommer til mere "
-"komplekse netv�rk er der behov for en mere kompleks protokol."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokollen tillader brugere p� et netv�rk at hente systeminformation "
-"fra enhver maskine p� dette netv�rk."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokollen tillader brugere p� et netv�rk a identificere\n"
-"hvem der er logget p� andre maskiner"
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokollen tillader eksterne brugere at hente en liste over alle "
-"brugere der er logget ind p� en maskine, der k�rer rwho d�monen (minder om "
-"finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Start lydsystemet p� din maskine"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog er en facilitet som mange d�moner bruger til log beskeder\n"
-"Det er en god id� altid at k�re syslog"
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Indl�s driverne for dine usb-enheder."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Starter X-font serveren (dette er obligatorisk for at XFree skal k�re)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "V�lg hvilke tjenester der skal startes automatisk ved opstart"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Printning"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Fildeling"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "System"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Ekstern administration"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Databaseserver"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Tjenester: %d aktiverede for %d registrerede"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Tjenester"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "k�rer"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "stoppet"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Tjenester og d�moner"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Beklager, der er ingen ekstra\n"
-"information om denne tjeneste."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ved opstart"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Tak fordi du valgte Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Velkommen til en verden af �ben kildekode"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"MandrakeSofts succes er baseret p� princippet om frit programmel. Dit nye "
-"operativsystem er resultatet af et samarbejde i det verdensomsp�ndende Linux-"
-"samfund"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "V�r med i det frie programmels verden"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Kom til at kende �ben Kildekode-samfundet og bliv medlem. L�r, undervis og "
-"hj�lp andre ved at v�re med i de mange diskussionsfora som du finder p� "
-"vores 'Samfunds'-netsider."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet og beskeder"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 giver dig det bedste programmel til at f� adgang til alt "
-"hvad internettet har at tilbyde. Surf p� nettet og se animationer med "
-"Mozilla og Konqueror, udveksl post og organiser dine personlige "
-"informationer med Evolution og Kmail, og meget mere."
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedie og Grafik"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 vil kunne presse din mulitimediemaskine til det yderste! "
-"Brug det nyeste programmel til at afspille musik og lydfiler, redig�r og "
-"organiser dine billeder eller foto, se tv, og videoer, og meget mere"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Udvikling"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 er den ultimative udviklingsplatform. Opdag styrken i GNU "
-"gcc-overs�tteren og de bedste �ben Kildekode-udviklingsmilj�er"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrolcenter"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Mandrake Linux 8.2 kontrolcenter er et samlet sted til fuldt ud at tilpasse "
-"og konfigurere dit Mandrake-system"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Brugergr�nseflader"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux tilbyder at v�lge mellem 11 forskellige grafiske "
-"skrivebordsmilj�er og vinduesh�ndteringer, inklusive GNOME 1.4, KDE 2.2.2, "
-"Window Maker og resten"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Serverprogrammel"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Lav din maskine om til en st�rk server med bare nogen f� klik med musen: "
-"Webserver, post, brandmur, ruter, fil- og print-server, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Spil"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 tilbyder det bedste i �ben Kildekode-spil - arkade, kort, "
-"sport, action, strategi, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Har du lyst til at l�re Linux nemt, hurtigt og gratis? MandrakeSoft tilbyder "
-"gratis tr�ning i Linux, s� vel som en m�de at afpr�ve dine fremskridt, via "
-"MandrakeCampus - vores tr�ningscenter p� nettet"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Kvalitetssupport fra Linux-samfundet, og fra MandrakeSoft, er lige om "
-"hj�rnet! Og hvis du allerede er en Linux-veteran kan du blive en ekspert og "
-"dele ud af din viden p� vores support-netsted"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Vores konsulenter er klar for ethvert af jeres IT-projekter til at analysere "
-"jeres krav og tilbyde en tilpasset l�sning. Drag fordel af MandrakeSofts "
-"udstrakte erfaring som Linux-producent til at fremkomme med et �gte IT-"
-"alternativ for jeres organisation."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Et komplet udvalg af Linux-l�sninger, s� vel som specialtilbud p� vores "
-"produkter og godbidder, er tilg�ngelige i vores e-butik"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"For yderligere information om MandrakeSofts professionelle tjenester og "
-"kommercielle tilbud kan du se p� den f�lgende netside:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Installerer pakker..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Jeg kan ikke l�se din partitionstabel, den er for �delagt :(\n"
-"Jeg vil fors�ge mig med at slette de beskadigede partitioner"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Fejl!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Jeg kan ikke finde filen '%s' som jeg beh�ver."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Autoinstallationskonfigurering"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Du er ved at konfigurere en automatisk installationsdiskette. Denne mulighed "
-"er lidt farlig, og m� bruges med forsigtighed.\n"
-"\n"
-"Med denne mulighed vil du igen kunne k�re installationen du gennemf�rte p� "
-"denne maskine, med muligheden for at selv kunne �ndre p� nogen af "
-"indstillingerne.\n"
-"\n"
-"For maksimal sikkerhed vil partitioneringen og formateringen aldrig blive "
-"gennemf�rt automatisk, uanset hvad du valgte under installationen.\n"
-"\n"
-"�nsker du at forts�tte?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Konfiguration af automatiske skridt"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"V�lg for hvert skridt om det skal v�re som under installationen, eller "
-"manuelt"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Velkommen.\n"
-"\n"
-"Parametrene for autokonfigurationen kan ses i afsnittene til venstre"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Tillykke!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketten er blevet genereret.\n"
-"Du kan nu gennemf�re installationen igen."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Autoinstallation"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Tilf�j et element"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Fjern det sidste element"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Rapport \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup D�mon-Rapport\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Rapportdetaljer\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "total fremdrift"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Sikkerhedskopi�r systemfiler..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Sikkerhedskopifiler for disk..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Sikkerhedskopi�r brugerfiler..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Fremdrift for sikkerhedskopiering af disk..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Sikkerhedskopi�r andre filer..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"filliste sending via FTP: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP forbindelsesproblem: Det var ikke muligt at sende dine backupfiler "
-"via FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Fejl ved afsendelse af post. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Valg af filer"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "V�lg filerne eller katalogerne og klik p� 'Tilf�j'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Mark�r alle muligheder som du beh�ver.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Disse valgmuligheder kan sikkerhedskopiere og genskabe alle filer i dit /etc "
-"katalog.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Lav sikkerhedkopi af dine systemfiler. ( /etc kataloget)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Medtag ikke kritiske filer (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Med denne valgmulighed vil du v�re i stand til at kunne genskabe\n"
-"enhver version af dit /etc katalog."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Mark�r alle brugere som du vil have med i din sikkerhedskopi."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Medtag ikke cache for netl�ser"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Fjern valgte"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Brugere"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Brug FTP forbindelse til sikkerhedskopiering"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Indtast v�rtsnavn eller IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Indtast kataloget hvori\n"
-" sikkerhedskopien skal l�gges p� denne maskine."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Indtast dit brugernavn"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Indtast din adgangskode"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Husk denne adgangskode"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP forbindelse"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Sikker forbindelse"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Brug CD/DVDROM til sikkerhedskopiering"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "V�lg din cd-plads"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Mark�r om du bruger et CDRW-medie"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Mark�r om du vil slette din CDRW f�r ny skrivning"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Mark�r om du �nsker at medtage\n"
-" installeringsopstart p� din cd."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Indtast din CD-br�nders enhedsnavn\n"
-" fx: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "brug b�nd til sikkerhedskopieringen"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Indtast endhedsnavnet der skal bruges til sikkerhedskopiering"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Indtast den maksimale st�rrelse\n"
-" tilladt for Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Indtast kataloget der skal gemmes:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Brug kvoter for sikkerhedskopieringsfiler"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Netv�rk"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Diskdrev / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "timeligt"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "dagligt"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "ugentligt"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "m�nedligt"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Brug d�mon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"V�lg tidsinterval mellem\n"
-"hver sikkerhedskopiering"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"V�lg mediet for\n"
-"sikkerhedskopiering."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Brug diskdrev med d�mon"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Brug FTP med d�mon"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Forsikr dig gerne at cron-d�monen er med i dine tjenester."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Send epost-rapport efter hver sikkerhedskopiering til:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Hvad"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Hvor"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Hvorn�r"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Flere muligheder"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup konfiguration"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "V�lg hvor du �nsker at sikkerhedskopiere"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "p� diskdrev"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "over netv�rk"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "V�lg hvad du vil sikkerhedkopiere"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Lav sikkerhedskopi af system"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Lav sikkerhedskopi af brugere"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "H�ndpluk bruger"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Kilder for sikkerhedskopi: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Systemfiler:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Brugerfiler:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Andre filer:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Gem til diskdrev p� stien: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Gem via FTP p� v�rt : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t brugernavn: %s\n"
-"\t\t p� sti: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Muligheder:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tMedtag ikke systemfiler\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tSikkerhedskopiering bruger tar og bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tSikkerhedskopiering bruger tar og gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- D�mon (%s) indeholder:\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Diskdrev.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-cdrom.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Netv�rk via FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Netv�rk via SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ingen konfiguration, klik p� Vejleder eller Avanceret.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Liste over data som skal genskabes:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Liste over data der er �delagt:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Afmark�r eller fjern det gerne n�ste gang."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Sikkerhedskopifiler er �delagte"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Alle dine valgte data er blevet               "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          genskabt uden fejl p� %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "        Genskab konfiguration     "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "O.k. at genskabe de andre filer."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Brugerliste at genskabe (kun den nyeste dato per bruger er vigtig)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Lav sikkerhedskopi af systemfiler f�r:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "V�lg dato for genskabning"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Brug disk til sikkerhedskopiering"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Genskab fra disk."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Indtast kataloget hvor sikkerhedskopier gemmes"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "V�lg et andet medie at genskabe fra"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Andet medie"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Genskab system"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Genskab brugere"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Genskab andet"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "v�lg sti at genskabe (i stedet for / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Lav ny sikkerhedskopi f�r genskabning (kun for inkrementalbackupper)."
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Fjern brugerkataloger f�r genskabning."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Genskab alle sikkerhedskopier"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Tilpasset genskabelse"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Hj�lp"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Forrige"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Gem"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Opbyg sikkerhedskopien"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Genskab"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "N�ste"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Lav sikkerhedskopieringen f�r genskablesen af den...\n"
-" eller efterse at stien til gemning er korrekt."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Fejl ved sendmail.\n"
-" din rapport blev ikke sendt\n"
-" Konfigur�r venligst sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Pakkeliste til installation"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Fejl ved sending af fil via FTP.\n"
-" Ret venligst din FTP-konfiguration."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Udv�lg de data du vil genskabe..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "V�lg medie for sikkerhedskopi..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "V�lg data for sikkerhedskopi..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"ingen konfigurationsfil fundet \n"
-"klik p� Vejleder eller Avanceret."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Under udvikling ... vent venligst:-)"
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Lav sikkerhedskopi af systemfiler"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Lav sikkerhedskopi af brugerfiler"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Lav sikkerhedskopi af andre filer"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Total fremdrift"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "Filer sendes via FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Sender filer..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Dataliste som skal medtages p� cdrom."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Indtast hastighed p� cd-br�nder"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Indtast navnet p� enheden for din cd-br�nder (fx: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Mark�r om du �nsker at medtage installeringsopstart p� din cd."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Lav sikkerhedskopi nu ud fra konfigurationsfil"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Se konfiguration af sikkerhedskopiering."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Konfiguration med vejleder"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Avanceret konfiguration"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Lav sikkerhedskopiering nu"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"beskrivelse af valgmuligheder:\n"
-"\n"
-" P� dette trin vil Drakbackup lade dig �ndre:\n"
-"\n"
-" - Komprimeringsm�den:\n"
-"    \n"
-"      Hvis du markerer bzip2-komprimering, vil du komprimere\n"
-"      dine data bedre end gzip (omkring 2-10 %).\n"
-"      Denne valgmulighed er ikke markeret som standard fordi\n"
-"      denne komprimeringsm�de kr�ver mere tid (omkring 1000% mere).\n"
-" \n"
-" - Opdateringsm�den:\n"
-"\n"
-"      Denne valgmulighed vil opdatere din backup, men denne\n"
-"      valgmulighed er ikke rigtigt nyttig fordi du skal\n"
-"      dekomprimere din backup f�r du kan opdatere den.\n"
-"      \n"
-" - M�den for .backupignore:\n"
-"\n"
-"      som med cvs vil Drakbackup ignorere alle referencer\n"
-"      indeholdt i .backupignore-filer i hvert katalog.\n"
-"      fx: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Nogle fejl under sendmail kommer fra \n"
-" en d�rlig konfiguration af postfix. For at l�se dette skal du\n"
-" s�tte myhostname eller mydomain i /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"beskrivelse af valgmuligheder:\n"
-"\n"
-" - Lav sikkerhedskopi af systemfiler:\n"
-"       \n"
-"\tDenne mulighed lader dig sikkerhedskopiere dit /etc katalog,\n"
-"\tsom indeholder alle konfigurationsfiler. V�r \n"
-"\tforsigtig p� genskabelsestrinnet med ikke at overskrive:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Lav sikkerhedskopi af brugerfiler: \n"
-"\n"
-"\tDenne mulighed lader dig v�lge alle de brugere som du vil lave\n"
-"\tsikkerhedskopier for.\n"
-"\tFor at spare p� diskplads anbefales du ikke medtager netl�seres\n"
-"\tcache.\n"
-"\n"
-" - Lav sikkerhedskopi af andre filer: \n"
-"\n"
-"\tDenne mulighed lader dig tilf�je mere data som skal gemmes.\n"
-"\tMed denne sikkerhedskopieringsm�de er det ikke muligt i �jeblikket \n"
-"\tat v�lge inkrementalbackup.\t\t\n"
-" \n"
-" - Inkrementalbackupper:\n"
-"\n"
-"\tInkrementalbackup er den st�rkeste valgmulighed for \n"
-"\tsikkerhedskopiering. Denne mulighed lader dig sikkerhedskopiere \n"
-"\talle dine data den f�rste gang, og derefter kun de �ndrede data.\n"
-"\tS� vil du i genskabelsestrinnet kunne genskabe dine data fra en \n"
-"\tangivet dato.\n"
-"\tHvis du ikke har valgt denne mulighed vil alle gamle\n"
-"\tsikkerhedskopier blive slettet f�r hver sikkerhedskopiering.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"beskrivelse af genskabelse:\n"
-" \n"
-"Kun den nyeste dato vil blive brugt fordi med inkrementalbackup \n"
-"er det n�dvendigt at genskabe hver gammel sikkerhedskopi �n for �n.\n"
-"\n"
-"S� hvis du ikke �nsker at genskabe en bruger, s� frav�lg denne helt.\n"
-"\n"
-"Ellers kan du v�lge blot �n af disse\n"
-"\n"
-" - Inkrementalbackupper:\n"
-"\n"
-"\tInkrementalbackup er den st�rkeste valgmulighed for \n"
-"\tsikkerhedskopiering. Denne mulighed lader dig sikkerhedskopiere \n"
-"\talle dine data den f�rste gang, og derefter kun de �ndrede data.\n"
-"\tS� vil du i genskabelsestrinnet kunne genskabe dine data fra en \n"
-"\tangivet dato.\n"
-"\tHvis du ikke har valgt denne mulighed vil alle gamle\n"
-"\tsikkerhedskopier blive slettet f�r hver sikkerhedskopiering.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft ved DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"Dette program er gratis programmel; du kan redistribuere det og/eller �ndre\n"
-"det i henhold til betingelserne i GNU General Public License, som publiceret "
-"af\n"
-"Free Software Foundation; enten version 2, eller enhver senere udgave\n"
-"af licensen.\n"
-"\n"
-"Dette program er udgivet i h�b om at det vil v�re anvendeligt, men\n"
-"UDEN NOGEN FORM FOR GARANTI; heller ikke garanti om\n"
-"SALGBARHED eller EGNETHED TIL ET BESTEMT FORM�L. Se GNU\n"
-"General Public License for flere detaljer.\n"
-"\n"
-"Du skulle have modtaget en kopi af GNU General Public License\n"
-"sammen med dette program; hvis ikke, skriv til Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,\n"
-"USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Beskrivelse:\n"
-"\n"
-"  Drakbackup bruges til at lave sikkehedskopier af dit system.\n"
-"  I konfigurationen kan du v�lge: \n"
-"\t- Systemfiler, \n"
-"\t- Brugeres filer, \n"
-"\t- Andre filer.\n"
-"\teller Hele dit system ...  eller Andet (s�som Windows partitioner)\n"
-"\n"
-"  Drakbackup lader dig tage sikkerhedskopier af dit system p�:\n"
-"\t- Ddisk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (med autoboot, redning og autoinstallering.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- B�nd.\n"
-"\n"
-"  Drakbackup lader dig genskabe dit system p�\n"
-"  et katalog valgt af brugeren.\n"
-"\n"
-"  Som standard vil alle sikkerhedskopier blive lagret i dit\n"
-"  /var/lib/drakbackup katalog\n"
-"\n"
-"  Konfigurationsfil:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Genskabelsestrin:\n"
-"  \n"
-"  I genskabelsestrinnet vil Drakbackup fjerne dit nuv�rende katalog \n"
-"  og kontrollere at alle dine backupfiler ikke er �delagte. Det \n"
-"  anbefales at du laver en sidste sikkerhedskopiering f�r genskabelse.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"beskrivelse af valgmuligheder:\n"
-"\n"
-"V�r forsigtig n�r du bruger ftp-backup, fordi kun \n"
-"sikkerhedskopier som er opbygget allerede bliver sendt til serveren.\n"
-"S� for �jeblikket skal du bygge sikkerhedskopien p� din disk \n"
-"f�r den sendes til ftp-serveren.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problemer med genskabelse af sikkerhedskopier:\n"
-"\n"
-"I genskabelsestrinnet vil Drakbackup kontrollere alle dine\n"
-"backupfiler f�r genskabelse af dem.\n"
-"F�r genskabelsen vil Drakbackup fjerne \n"
-"dit nuv�rende katalog, og alle dine data vil g� tabt.\n"
-"Det er vigtigt at v�re forsigtig og ikke �ndre sikkerhedskopieringens\n"
-"datafiler i h�nden.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Beskrivelse:\n"
-"\n"
-"  Drakbackup bruges til at lave sikkehedskopier af dit system.\n"
-"  I konfigurationen kan du v�lge \n"
-"\t- Systemfiler, \n"
-"\t- Brugeres filer, \n"
-"\t- Andre filer.\n"
-"\teller Hele dit system ...  eller Andet (s�som Windows partitioner)\n"
-"\n"
-"  Drakbackup lader dig tage sikkerhedskopier af dit system p�:\n"
-"\t- Ddisk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (med autoboot, redning og autoinstallering.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- B�nd.\n"
-"\n"
-"  Drakbackup lader dig genskabe dit system p�\n"
-"  et katalog valgt af brugeren.\n"
-"\n"
-"  Som standard vil alle sikkerhedskopier blive lagret i dit\n"
-"  /var/lib/drakbackup katalog\n"
-"\n"
-"  Konfigurationsfil:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Genskabelsestrin:\n"
-"  \n"
-"  I genskabelsestrinnet vil Drakbackup fjerne dit nuv�rende katalog \n"
-"  og kontrollere at alle dine backupfiler ikke er �delagte. Det \n"
-"  anbefales at du laver en sidste sikkerhedskopiering f�r genskabelse.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Installationen af %s mislykkedes. F�lgende fejl opstod:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "S�g efter installerede skrifttyper"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Frav�lg installerede skrifttyper"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "fortolk alle skrifttyper"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "kunne ikke finde nogen skrifttyper"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "f�rdig"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "Kunne ikke finde nogen skrifttyper i dine monterede partitioner"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Genv�lg korrekte skrifttyper"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "Kunne ikke finde nogen skrifttyper.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "S�g efter skrifttyper i installeret liste"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopi af skrifttyper"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installation af True Type-skrifttyper"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "Vent venligst p� ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Installation af True Type f�rdig"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konvertering af skrifttyper"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "opbyg type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referencer"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "Konvertering af ttf-skrifttyper"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "Konvertering af pfm-skrifttyper"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Undertryk midlertidige filer"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Genstart XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Undertryk skrifttypefiler"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "genstart af xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"F�r du installerer nogen skrifttyper b�r du v�re sikker p� at du har lov til "
-"at bruge og installere dem p� dit system. \n"
-"\n"
-"-Du kan installere skrifttyperne p� normal m�de. I sj�ldne tilf�lde kan "
-"fejlbeh�ftede skrifttyper f� din X-server til at h�nge."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Import af skrifttyper"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Hent skrifttyper fra Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Afinstall�r skrifttyper"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Avancerede muligheder"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Liste over skrifttyper"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "V�lg de programpakker som vil underst�tte skrifttyperne:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Generelle printere"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "V�lg skrifttypefilen eller -kataloget oh klik p� 'Tilf�j'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Installationsliste"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "Klik her hvis du er sikker."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "Her hvis ikke."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Fravalgte alt"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Valgte alt"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Fjern liste"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Begyndelsestester"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopi�r skrifttyper p� dit system"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Install�r og konvert�r skrifttyper"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Efterbehandling for installering"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Fjern skrifttyper p� dit system"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Efterbehandling for afinstallering"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Deling af internetforbindelse"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Deling af internetforbindelse er sl�et til"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Indstilling af deling af internetforbindelse er allerede gjort.\n"
-"Deling er aktiveret.\n"
-"\n"
-"Hvad �nsker du at g�re?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "de-aktiv�r"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "tr�d af"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "genkonfigur�r"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Sl�r servere fra..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Deling af internetforbindelse er nu sl�et fra"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Deling af internetforbindelse er sl�et fra"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Indstilling af deling af internetforbindelse er allerede gjort.\n"
-"Den er de-aktiveret for n�rv�rende\n"
-"Hvad �nsker du at g�re?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "aktiv�r"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Aktiverer servere..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Deling af internetforbindelse er nu sl�et til"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Du er ved at konfigurere din maskine til at dele sin internetforbindelse.\n"
-"Med denne mulighed vil andre maskiner p� dit lokale netv�rk kunne bruge "
-"internetforbindelsen p� denne maskine.\n"
-"\n"
-"Bem�rk: du skal bruge en dediceret netv�rksadapter, for at lave et lokalt "
-"netv�rk (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Gr�nseflade %s (benytter modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Gr�nseflade %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Ikke nogen netv�rksadapter i dit system!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ingen ethernet netv�rksadapter er blevet fundet p� dit system. K�r venligst "
-"v�rkt�jet til maskinel konfiguration."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Netv�rksgr�nsesnit"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Der er kun �n konfigureret netv�rksadapter i dit system:\n"
-"\n"
-"%s\n"
-"\n"
-"Jeg skal til at s�tte dit lokalnet p� med den adapter."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "V�lg hvilken netv�rksadapter som skal forbindes til dit lokalnet."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Netv�rksgr�nsesnit allerede konfigureret"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Advarsel, netv�rkskortet (%s) er allerede konfigureret.\n"
-"\n"
-"�nsker du en automatisk re-konfiguration?\n"
-"\n"
-"Du kan g�re det i h�nden, men du skal vide hvad du g�r."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatisk rekonfiguration"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Vis aktuelle gr�nsesnitskonfiguration"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Nuv�rende konfiguration af `%s':\n"
-"\n"
-"Netv�rk: %s\n"
-"IP-adresse: %s\n"
-"IP-attribut: %s\n"
-"Driver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Jeg kan beholde din aktuelle konfiguration og antage at du allerede har sat "
-"en DHCP-server op; i s� tilf�lde kontroll�r da gerne at jeg har l�st det C-"
-"klasse-netv�rk korrekt, som du bruger for dit lokalnetv�rk; jeg vil ikke "
-"genkonfigurere det og jeg vil ikke r�re ved din konfiguration af DHCP-"
-"serveren.\n"
-"\n"
-"Ellers kan jeg genkonfigurere dit gr�nsesnit og genkonfigurere en DHCP-"
-"server for dig.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C-klasse lokalnetv�rk"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "(Denne) DHCP-servers IP-adresse"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Rekonfigur�r gr�nsesnit og DHCP-server"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Lokalnetv�rket endte ikke med `.0', st�r af."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Mulig LAN-adresse konflikt fundet i konfigurationen til %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Brandmurkonfiguration fundet!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Advarsel! En eksisterende brandmurkonfiguration er blevet fundet. Du skal "
-"muligvis lave manuelle rettelser efter installationen."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigurerer..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurerer skript, installerer programmel, starter servere..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemer med installation af %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Alt er blevet konfigureret.\n"
-"Du kan nu dele din internetforbindelse med andre maskiner p� dit lokale "
-"netv�rk, ved at bruge DHCP."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Indstilling er allerede gjort. men er de-aktiveret for n�rv�rende."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Indstilling er allerede gjort. og er for n�rv�rende aktiv."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Deling af Internetforbindelse har aldrig v�ret konfigureret."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Konfiguration af deling af internetforbindelse"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Velkommen til v�rkt�jet til deling af internetforbindelse!\n"
-"%s\n"
-"\n"
-"Klik p� Konfigur�r for at starte programmet til at dele din "
-"internetforbindelse!"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netv�rkskonfiguration (%d adaptorer)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Slet profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil der skal slettes:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Ny profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Navnet p� profilen der skal oprettes (den nye profil oprettes som en \n"
-"kopi af den nuv�rende) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "V�rtsnavn: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internetadgang"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Type:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Gr�nseflade:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Vent venligst"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfigur�r Internetadgang..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN konfiguration"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Drivprogram"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Gr�nseflade"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfigur�r lokalnetv�rk..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Klik her for at starte vejlederen ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Vejleder..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Anvend"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Vent venligst... S�tter konfigurationen i anvendelse"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Tilsluttet"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Ikke tilsluttet"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Tilslut..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Afbrud..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Advarsel, en anden internetforbindelse er blevet fundet, der m�ske bruger "
-"dit netv�rk"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen konfigurerede gr�nsesnit.\n"
-"Konfigur�r disse f�rst ved at klikke p� 'Konfigur�r'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN konfiguration"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Opstartsprotokol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Startede med opstart"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP-klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktiv�r nu"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktiv�r nu"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Dette gr�nsesnit er ikke blevet konfigureret endnu.\n"
-"Start konfigurationsvejlederen i hovedvinduet"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen internet-opkobling.\n"
-"Opret �n f�rst ved at klikke p� 'Konfigur�r'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfiguration af Internetforbindelse"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration af Internetforbindelse"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Type af forbindelse"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametre"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet-kort"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-Klient"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Indstiller sikkerhedsniveau"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolcenter"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "V�lg det v�rkt�j du �nsker at benytte"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canada (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (kabel-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Kina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japan (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japan (kabel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "�steuropa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irland"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Vesteuropa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australien"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "New Zealand"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Sydafrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Indtast din tv-standard og land"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV-standard:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Omr�de:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Skanning for tv-kanaler i gang..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Skanner for tv-kanaler"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "Intet tv-kort genkendt!"
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Intet tv-kort blev genkendt p� din maskine. Tjek venligst at et video/tv-"
-"kort der underst�ttes af Linux er korrekt isat.\n"
-"\n"
-"\n"
-"Du kan bes�ge vores database over udstyr p�:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "brug: keyboarddrake [--expert] [tastatur]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "V�lg tastaturlayout."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vil du have at Bak-tasten giver Delete i konsollen?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Skift cdrom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Inds�t installations-cdrom'en i dit cdrom-drev og tryk p� Ok, n�r det gjort\n"
-"Hvis du ikke har den - tryk p� Annull�r, s� undg�s levende opgradering"
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kan ikke starte levende opgradering!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "�ndringen er fortaget, men for at v�re effektiv skal du logge ud"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Vis kun for den valgte dag"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fil/_Ny"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<Ctrl>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fil/_�bn"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<Ctrl>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fil/_Gem"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<Ctrl>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fil/Gem _som"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fil/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Indstillinger"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Indstillinger/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Hj�lp"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Hj�lp/_Om"
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Bruger"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Beskeder"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "System"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Forklaringer til Mandrake-v�rkt�jer"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "s�g"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Et v�rkt�j til at overv�ge dine logfiler"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Indstillinger"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "Samstemmende:"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "Men ikke samstemmende"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "V�lg fil"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalender"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Indhold af filen"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Post og SMS p�mindelse"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "vent venligst, fortolker filen: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Post og SMS p�mindelseskonfiguration"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Velkommen til programmet for post og SMS-konfigurering.\n"
-"\n"
-"Her vil du kunne ops�tte p�mindelsessystemet\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "Ops�tning af tjenester"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Du vil modtage en advarsel hvis en af de valgte tjenester ikke l�ngere k�rer"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "indl�s ops�tning"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Du vil modtage en advarsel hvis belastningen er h�jere end denne v�rdi"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "advarsels-konfiguration"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Konfigurerer m�den systemet vil advare dig p�"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Gem som..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "V�lg muse-type."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ingen seriel_usb fundet\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulering af tredje knap?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s fundet p� %s, skal det konfigureres?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "V�lg en skanner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Denne %s-skanner er ikke underst�ttet"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"Scannerdrake kunne ikke genkende din %s-skanner.\n"
-"V�lg venligst den enhed hvor din skanner er isat"
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "v�lg enhed"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Denne %s-skanner skal v�re konfigureret af printerdrake.\n"
-"Du kan starte printerdrake fra Mandrake Kontrolcenter i Udstyr-afsnittet."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Din %s-skanner er blevet konfigureret.\n"
-"Du kan nu skanne dokumenter med 'XSane' fra Multimedie/grafik iprogrammenuen."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Brandmurskonfiguration"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Brandmurskonfiguration"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Brandmure\n"
-"\n"
-"Du har allerede indstillet en brandmur.\n"
-"Klik p� Konfigur�r for at �ndre eller fjerne brandmuren"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Brandmure\n"
-"\n"
-"Klik p� Konfigur�r for at s�tte en standard-brandmur op"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "V�lg sprog"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "V�lg installations-metode"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Harddisk bestemmelse"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfigur�r mus"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "V�lg tastatur"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sikkerhed"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "V�lg filsystemer"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Format�r partitioner"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "V�lg pakker til installation"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Install�r system"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Tilf�j bruger"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfigur�r netv�rk"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigur�r tjenester"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Install�r systemopstarter"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Opret opstartsdiskette"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigur�r X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Install�r opdateringer"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Afslut installation"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall-konfigurator\n"
-"\n"
-"Dette konfigurerer en personlig brandmur for denne Mandrake Linux maskine.\n"
-"For en st�rk dedikeret brandmurs-l�sning se venligst den specialiserede "
-"MandrakeSecurity Firewall-distribution."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Vi vil nu sp�rge dig om hvilke tjenester du gerne vil tillade\n"
-"internettet at forbinde til.  T�nk grundigt over disse\n"
-"sp�rgsm�l, da din maskines sikkerhed er vigtig.\n"
-"\n"
-"Hvis du ikke bruger nogle af disse tjenester s� sk�rm dem af\n"
-"med brandmuren.  Du kan altid �ndre indstillingerne n�r du vil\n"
-"ved at k�re dette program igen!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"K�rer du en webserver p� denne maskine som du har brug for at hele\n"
-"internettet kan se? Hvis du k�rer en webserver som kun beh�ver at blive\n"
-"tilg�et af denne maskine kan du roligt svare NEJ her.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"K�rer du en DNS-navneserver p� denne maskine? Hvis du ikke har sat\n"
-"en op til at give IP- og zone-information til hele internettet kan du svare\n"
-"nej her.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"�nsker du at tillade indg�ende Secure Shell ssh-forbindelser?\n"
-"Det er en erstatning for telnet som du m�ske vil bruge til at logge ind.\n"
-"Hvis du bruger telnet nu b�r du afgjort skifte til ssh. telnet er ikke\n"
-"krypteret - s� nogle angribere kan stj�le din adgangskode hvis du bruger\n"
-"den. ssh er krypteret og tillader ikke den slags aflytning."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Vil du tillade indg�ende telnet-forbindelser?\n"
-"Dette er virkeligt usikkert som vi har forklaret i det foreg�ende billede. "
-"Vi\n"
-"anbefaler st�rkt at du svarer NEJ her og bruger ssh i stedet for telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"K�rer du en FTP-tjeneste p� denne maskine som du har brug for at hele\n"
-"internettet har adgang til? Hvis du har s� anbefaler vi st�rkt at du kun\n"
-"bruger den til anonyme overf�rsler. En hvilkensomhelst adgangskode sendt\n"
-"over FTP kan stj�les af visse angribere, siden FTP heller ikke bruger\n"
-"kryptering til at overf�re adgangskoder.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"K�rer du en post-server her? Hvis du sender beskeder med\n"
-"pine, mutt eller en anden tekstbaseret post-klient er det sandsynligt.\n"
-"Ellers b�r du sk�rme den v�k.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"K�rer du en POP- eller IMAP-tjeneste her? Dette kan bruges til at betjene "
-"ikke-webbaserede postkonti for folk via denne maskine.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Du ser ud til at k�re en 2.2-kerne. Hvis din IP-netv�rksadresse\n"
-"bliver sat automatisk af en maskine i dit hjem eller kontor\n"
-"(dynamisk tildelt) b�r vi tillade dette. Er dette tilf�ldet?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"F�r din maskine tiden synkroniseret efter en anden maskine?\n"
-"Oftest er dette brugt af st�rre Unix/Linux-organisationer for at\n"
-"synkronisere tiden for logning og lignende. Hvis du ikke er en del\n"
-"af et st�rre kontor og ikke har h�rt om dette er det sandsynligvis\n"
-"ikke tilf�ldet."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurationen er f�rdig. Skal vi skrive disse �ndringer til disken?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan ikke �bne %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kan ikke �bne %s for skrivning: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Nej, jeg har ikke brug for DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Ja, jeg har brug for DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Nej, jeg har ikke brug for NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Ja, jeg har brug for NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Gem ikke"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Gem og afslut"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Vejleder til brandmurskonfiguration"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Nej (s�t en brandmur op mod internettet)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Nej (tillad dette gennem brandmuren)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Vent venligst..., kontrollerer installerede pakker"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Kunne ikke installere de kr�vede pakker: %s og Bastille.\n"
-" Pr�v at installere dem manuelt."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Netv�rksmaskine (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-v�rt, SMB-v�rt, mellemv�rt (proxy), SSH-v�rt"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kontor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome-arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "V�rkt�jer til Palm Pilot og Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Brandmur/router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Server for dom�nenavne (DNS) og netv�rksinformation (NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kontor-programmer: Tekstbehandler (kword, abiword), regneark (kspread, "
-"gnumeric), pdf-visere, o.lign."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Lyd-relaterede v�rkt�jer: mp3 eller midi-afspillere, mixere o.lign."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "B�ger og vejledninger om Linux og Frit Programmel"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE-arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedie - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Samling af v�rkt�jer til post, nyheder, filoverf�rsel og chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL eller MySQL database-server"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "V�rkt�jer til at lette indstillingen af din maskine"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedie - Lyd"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "V�rkt�jer"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentation"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsolv�rkt�jer"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix postserver, Inn nyhedsserver"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet-station"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedie-station"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfiguration"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Flere grafiske milj�er (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop -milj�et, det grundl�ggende grafiske milj�, med en vifte af "
-"supplerende v�rkt�jer."
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafisk milj�"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache og Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "V�rkt�jer til at skabe og br�nde CD-er"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kontor-arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, o.lign."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiske programmer som fx The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C og C++ udviklingsbiblioteker, programmer, og include-filer."
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Netv�rksmaskine server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Post/diskussionsgrupper"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Spillemaskine"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videoafspillere og redigeringsv�rkt�jer"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedie - Grafik"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Underholdnings-programmer: arkade, br�t, strategi, osv."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"V�rkt�jss�t til at l�se samt sende post og nyheder (pine, mutt, tin..) , og "
-"til at browse p� nettet"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arkivering, emulering, overv�gning"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Personlig �konomi"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Et grafisk milj� med brugervenlig samling af programmer og v�rkt�jer"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienter for forskellige protokoller inklusiv ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetadgang"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Lyd- og video-afspillere og redigeringsv�rkt�jer"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andre grafiske milj�er"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redigeringsv�rkt�jer, skaller, filv�rkt�jer, terminaler"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmer til at h�ndtere din �konomi, som fx gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Personlig informationsh�ndtering"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedie - CD-br�nding"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Videnskabelig arbejdsstation"
-
-#~ msgid "About"
-#~ msgstr "Om"
-
-#~ msgid "             Help           "
-#~ msgstr "             Hj�lp          "
-
-#~ msgid ""
-#~ "XawTV isn't installed ...\n"
-#~ "You should install it.\n"
-#~ " Just type \"urpmi xawtv\""
-#~ msgstr ""
-#~ "XawTV er ikke installeret ...\n"
-#~ "D� b�r installere den.\n"
-#~ " Bare skriv \"urpmi xawtv\""
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Kan ikke f� fat i kernemoduler svarende til din kerne (fil %s mangler)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Ingenting"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "V�lg en forvalgt printer!"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Brug/Opfrisk printerliste"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Du kan nu give dens parametre til modul %s."
-
-#~ msgid "mount failed"
-#~ msgstr "montering mislykkedes"
-
-#~ msgid ""
-#~ "The characters of your language can't be displayed in console,\n"
-#~ "so the messages will be displayed in english during installation"
-#~ msgstr ""
-#~ "Tegnene i dit sprog kan ikke vises i konsollen\n"
-#~ "s� beskederne vil blive vist p� engelsk under installationen"
diff --git a/perl-install/share/po/de.po b/perl-install/share/po/de.po
deleted file mode 100644
index 9629e8953..000000000
--- a/perl-install/share/po/de.po
+++ /dev/null
@@ -1,12653 +0,0 @@
-# german translation of DrakX (cooker/gi/perl-install/share/po/de.po).
-# Copyright (C) 1999,2000,2001 MandrakeSoft.
-# Dr. Hinrich Göhlmann <hgoehlmann@gmx.de>, 1999,2000
-# Stefan Siegel <siegel@linux-mandrake.com>, 1999,2000,2001,2002
-# Daniel Haischt <daniel.haischt@student.fh-reutlingen.de>, 2000
-# Peer Dunker <peer46@gmx.net>, 2001
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-10 11:56+0100\n"
-"Last-Translator: Stefan Siegel <siegel@linux-mandrake.com>\n"
-"Language-Team: German <cooker-i18n@linux-mandrake.com>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Alle Karten getrennt konfigurieren"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Xinerama Erweiterung verwenden"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Nur Karte „%s“ (%s) konfigurieren"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Mehrkarten-Einstellung"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Ihr System erlaubt die Verwendung einer Mehrkarten Konfiguration.\n"
-"Was wollen Sie tun?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafikkarte"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Wählen Sie Ihre Grafikkarte"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Wählen Sie einen X Server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X Server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Wählen Sie einen X Treiber"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X Treiber"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Welche XFree-Konfiguration wollen Sie verwenden?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ihre Grafikkarte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. Ihre Karte wird auch von XFree %s unterstützt, wodurch Sie \n"
-"bessere 2D-Unterstützung erhalten können."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Ihre Grafikkarte kann mit XFree %s 3D-hardwarebeschleunigt werden."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s mit 3D-Hardwarebeschleunigung"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Ihre Karte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. BEMERKUNG: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM \n"
-"UND KANN ZUM STEHENBLEIBEN IHRES RECHNERS FÜHREN."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s mit EXPERIMENTELLER 3D-Hardwarebeschleunigung"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ihre Karte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. BEM: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM UND KANN \n"
-"ZUM STEHENBLEIBEN IHRES RECHNERS FÜHREN. Ihre Karte wird auch von \n"
-"XFree %s unterstützt, wodurch Sie bessere 2D-Unterstützung erhalten \n"
-"können."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (Installationsbildschirmtreiber)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfigurieren"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Wählen Sie die Speichergröße Ihrer Grafikkarte"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Wählen Sie die Einstellungen für den Server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Wählen Sie Ihren Monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Die beiden kritischen Parameter sind die vertikale Wiederholfrequenz\n"
-"(wie oft der gesamte Bildschirm neu angezeigt wird) und insbesondere die\n"
-"horizontale Synchronisationsfrequenz (wie oft Scanlinien angezeigt werden).\n"
-"Es ist SEHR WICHTIG, dass Sie keinen Monitortyp mit einer falschen \n"
-"Synchronisationsrate auswählen, da Sie sonst Ihren Monitor beschädigen \n"
-"könnten. Im Zweifelsfall wählen Sie bitte eine konservativere \n"
-"Einstellung."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontale Wiederholfrequenz"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikale Wiederholfrequenz"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Ihr Monitor ist nicht konfiguriert"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Ihre Grafikkarte ist noch nicht konfiguriert"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Die Auflösungen wurden noch nicht ausgewählt"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Möchten Sie die vorgenommenen Einstellungen prüfen?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Warnung: Testen dieser Grafikkarte kann Ihren Rechner anhalten"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Prüfen der Einstellungen"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"Versuchen Sie bitte, einige Einstellungen zu ändern"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ein Fehler ist aufgetreten:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Verlassen in %d Sekunden"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ist dies richtig?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr ""
-"Ein Fehler ist aufgetreten. Versuchen Sie bitte, einige Parameter zu ändern"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Auflösung"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Wählen Sie bitte Auflösung und Farbtiefe"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikkarte: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 Server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Mehr"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "OK"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Experten-Modus"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Alle anzeigen"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Auflösungen"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastaturtyp: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Maustyp: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Mausschnittstelle: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor Horiz. Frequenz: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor Vert. Frequenz: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafikkarte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafikkartenidentifikation: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafikkartenspeicher: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farbtiefe: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Auflösung: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 Server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 Treiber: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X-Window Konfiguration vorbereiten"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Was wollen Sie machen?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Monitor ändern"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Grafikkarte ändern"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Server Einstellungen ändern"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Auflösung ändern"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Informationen anzeigen"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Nochmals testen"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Verlassen"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Die Änderungen beibehalten?\n"
-"Momentan wäre dies:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X zur Startzeit"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ich kann GNU/Linux so einrichten, dass bei jedem Systemstart\n"
-"automatisch die grafische Oberfläche (= der X Server) aktiviert wird.\n"
-"Wollen Sie, dass X nach jedem Neustart direkt zur Verfügung steht?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-"Bitte loggen Sie sich erneut in %s ein, \n"
-"um die Änderungen wirksam werden zu lassen."
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Bitte loggen Sie sich aus, und drücken Sie Ctrl-Alt-Rücktaste"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 Farben (8 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32.000 Farben (15 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65.000 Farben (16 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 Millionen Farben (24 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 Milliarden Farben (32 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB oder mehr"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640×480 bei 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800×600 bei 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibel, 1024×768 bei 87 Hz, interlaced (kein 800×600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024×768 bei 87 Hz, interlaced und 800×600 bei 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800×600 bei 60 Hz und 640×480 bei 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024×768 bei 60 Hz und 800×600 bei 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Hochfrequenz SVGA, 1024×768 bei 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Mehrfrequenz mit der Fähigkeit für 1280×1024 bei 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Mehrfrequenz mit der Fähigkeit für 1280×1024 bei 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Mehrfrequenz mit der Fähigkeit für 1280×1024 bei 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ihr Monitor kann 1600×1200 bei 70 Hz darstellen"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ihr Monitor kann 1600×1200 bei 76 Hz darstellen"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Erster Sektor der Boot-Partition"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Erster Sektor der Platte (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO Installation"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Wo soll der Betriebssystemstarter installiert werden?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/Grub Installation"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO mit Textmenü"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO mit grafischem Menü"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Boot von DOS/Windows aus (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Haupt-Optionen des Betriebssystemstarters"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Zu verwendender Betriebssystemstarter"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Installation des Betriebssystemstarters"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Boot Gerät"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (funktioniert nicht mit alten BIOS Versionen)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video Modus"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Wartezeit vorm Starten des Standard Betriebssystems"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Passwort"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Passwort (erneut)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Gebrauch der Kommandozeilen-Parameter einschränken"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "Einschränken"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Die Partition /tmp bei jedem Systemstart säubern"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Geben Sie, falls nötig, die genaue RAM Größe an (%d MB gefunden)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Mehrere Profile einschalten"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Geben Sie die RAM Größe in MB an"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Die Option „Gebrauch der Kommandozeilen-Parameter einschränken“ ist ohne \n"
-"Angabe eines Passworts wirkungslos"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Bitte versuchen Sie es erneut"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Die Passwörter stimmen nicht überein"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Init Nachricht"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Verzögerung"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "BS-Startverzögerung für den Kern"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "BS-Start von CD erlauben"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Open Firmware Start erlauben"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Standard BS"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Sie haben sich entschieden, Ihren Betriebssystemstarter auf einer Partition "
-"zu starten.\n"
-"Das impliziert, dass Sie einen anderen Betriebssystemstarter im Master-Boot-"
-"Record haben (etwa System Commander).\n"
-"\n"
-"Von welchem Verzeichnis wollen Sie starten?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hier sind die verschiedenen Einträge.\n"
-"Sie können weitere hinzufügen oder existierende ändern."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Hinzufügen"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Fertig"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Ändern"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Welche Art Eintrag wollen Sie hinzufügen?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Anderes Betriebssystem (SunOS ...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Anderes Betriebssystem (MacOS ...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Anderes Betriebssystem (Windows ...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Kern"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Verzeichnisbaumwurzel"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Übergeben"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Init-RamDisk"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Schreiben/Lesen"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabelle"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Unsicher"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Identifikator"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Standard"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Größe der Init-RamDisk"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Eintrag löschen"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Leere Einträge sind nicht erlaubt"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Sie Müssen ein Kern-Abbild angeben"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Sie müssen die Verzeichnisbaumwurzel festlegen"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Dieser Eintrag existiert bereits"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Schnittstelle(n) %s %s gefunden"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Verfügen Sie über weitere?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Verfügen Sie über %s Schnittstellen?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nein"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Hardware Informationen anzeigen"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installation des Treibers für die Karte %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(Modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Welchen %s-Treiber soll ich versuchen?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"In einigen Fällen benötigt der „%s“ Treiber zusätzliche Informationen,\n"
-"um korrekt zu funktionieren, meistens sollte er jedoch auch ohne \n"
-"funktionieren. Wollen Sie solche Informationen angeben oder es dem Treiber "
-"überlassen, nach geeigneten Parametern zu suchen? (Das Austesten durch den "
-"Treiber kann in seltenen Fällen zum „Hängenbleiben“ des Rechners führen, was "
-"jedoch keine Hardwareschäden nach sich ziehen sollte)"
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatische Erkennung"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Optionen angeben"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Sie müssen nun die Optionen für Modul %s angeben.\n"
-"Bedenken Sie, dass Adressen alle mit „0x“ beginnen müssen, etwa „0x300“"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sie müssen nun die Optionen für Modul %s angeben.\n"
-"Optionen haben die Form „name=wert name2=wert2“.\n"
-"Beispielsweise: „io=0x300 irq=7“"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modul-Optionen:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Laden von Modul %s schlug Fehl.\n"
-"Wollen Sie es erneut mit anderen Parametern versuchen?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "Zugriff auf X-Programme"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "Zugriff auf RPM-Werkzeuge"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "„su“ erlauben"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "Zugriff auf Verwaltungsdateien"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s wurde bereits hinzugefügt)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Dieses Passwort ist zu einfach"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Bitte geben Sie ein Benutzerkennzeichen an"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Das Benutzerkennzeichen sollte nur aus Kleinbuchstaben, Ziffern, \n"
-"„-“ und „_“ bestehen"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Dieses Benutzerkennzeichen existiert bereits"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Benutzer hinzufügen"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Benutzerkennzeichen einrichten\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Benutzer akzeptieren"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Benutzername"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Benutzerkennzeichen"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Symbol"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ich kann GNU/Linux so einrichten, dass beim Systemstart automatisch \n"
-"ein Benutzer angemeldet wird.\n"
-"Wollen Sie davon Gebrauch machen?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Wählen Sie den Standard-Nutzer:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Wählen Sie den Window-Manager, den Sie verwenden wollen:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Bitte wählen Sie die zu verwendende Sprache."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Sie können andere Sprachen auswählen, die nach der Installation zur "
-"Verfügung stehen."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Alle"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Allen Benutzern erlauben"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Benutzerdefiniert"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Kein Teilen"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Das Paket %s muss installiert sein. Soll ich es installieren?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-"Sie können die Dateien mittels Samba oder NFS anbieten. Welche Variante "
-"wollen Sie?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Das zwingend benötigte Paket „%s“ fehlt."
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Wollen Sie Benutzern erlaubern, Verzeichnisse freizugeben?\n"
-"Wenn Sie das erlauben, können die Anwender Verzeichnisse in Konqueror oder "
-"Nautilus im Kontextmenü der eintsprechenden Verzeichnisses freigeben.\n"
-"\n"
-"Mit „Benutzerdefiniert“ können Sie eine Einstellung pro Kennzeichen "
-"vornehmen.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Abbruch"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Userdrake starten"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Das Teilen zwichen Benutzern verwendet die Gruppe „fileshare“.\n"
-"Sie können UserDrake verwenden, um Benutzerkennzeichen in diese Gruppe "
-"aufzunehmen."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Cracker-Spielplatz"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Schwach"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Hoch"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Höher"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Diese Ebene ist mit Vorsicht zu verwenden. Zwar macht sie Ihr System \n"
-"einfacher handhabbar, aber auch leichter angreifbar: In dieser Form darf \n"
-"der Rechner nicht als Netzwerkrechner (LAN oder Modem) verwendet werden, \n"
-"da Angreifer mangels Passwort an Ihre Daten gelangen können!"
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Passwortabfragen sind nun eingeschaltet, aber die Verwendung als \n"
-"Netzwerkrechner kann hier nicht empfohlen werden."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Das ist die Standard-Sicherheitsebene für Rechner, mit Internetzugang \n"
-"als Klient."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Es gibt bereits mehr Restriktionen und jede Nacht werden automatische "
-"Sicherheitstests durchgeführt."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Mit dieser Sicherheitsebene wird es möglich, das System als einen \n"
-"Server zu verwenden.\n"
-"Die Sicherheit ist nun ausreichend hoch, um das System als Server \n"
-"einzusetzen, der einer Vielzahl von Klienten einen Verbindungsaufbau \n"
-"erlaubt. Es sei hier angemerkt, dass Ihr Rechner, wenn Sie nur als \n"
-"Klient ins Internet gehen, besser eine niedrigere Sicherhetsebene \n"
-"verwenden sollte."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Diese Ebene bietet die selbe Funktionalität, wie die vorherige. Jedoch ist \n"
-"das System nun komplett geschlossen. Es ist die höchste Sicherheitsebene."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Wählen Sie eine Sicherheitsebene"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Sicherheitsebene"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "„libsafe“ bei Servern verwenden"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "Eine Bibliothek, die gegen sog. „buffer overflow“-Angriffe schützt."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Willkommen zum Betriebssystem-Starter %s\n"
-"\n"
-"Markieren Sie in obiger Liste ein Betriebssystem\n"
-"oder warten Sie %d Sekunden, dann starte ich Ihr Standard-System.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Willkommen zum Betriebssystem-Starter GRUB!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Verwenden Sie die Tasten %c und %c um ein Betriebssystem zu w„hlen."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Zum Starten des BS drcken Sie <Return>. Mit <e> k”nnen Sie das"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "Kommando vorher editieren, mit <c> erhalten Sie eine Kommandozeile."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "In %d Sekunden wird das gew„hlte BS automatisch gestartet."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "Sie haben nicht genug Platz in „/boot“"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Arbeitsoberfläche"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start-Menü"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-"Sie können den Betriebssystemstarter\n"
-"nicht auf einer %s Partition installieren!\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "Es steht noch keine Hilfe zur Verfügung.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguration der Boot-Einstellungen"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Datei"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Datei/_Beenden"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Neuer kategorisierter Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Neuer Stil"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Herkömmlicher Stil"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Herkömmlicher Gtk+ Stil"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Aurora beim Hochfahren starten"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB Modus"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot Modus"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Sie verwenden momentan „%s“ als Betriebssystemstarter.\n"
-"Wählen Sie „Konfigurieren“, wenn Sie den Assistenten starten wollen."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigurieren"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "System-Modus"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "X-Window nach dem Hochfahren automatisch starten "
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nein ich will kein Autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja ich will Autologin mit diesem Kennzeichen und dieser Oberfläche"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Ich kann „/etc/inittab“ nicht zum lesen öffnen: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d Minuten"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 Minute"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d Sekunden"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr ""
-"Vor der Partitionierung kann ich keine Bildschim-Schnappschüsse machen."
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Die Bildschim-Schnappschüsse liegen nach der Installation unter „%s“"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Frankreich"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgien"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Tschechische Republik"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Deutschland"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Griechenland"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norwegen"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Schweden"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Holland"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italien"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Östereich"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Vereinigte Staaten von Amerika"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Bitte machen Sie erst eine Sicherheitskopie Ihrer Daten!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lesen Sie bitte aufmerksam!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Wenn Sie aboot verwenden wollen, müssen Sie ausreichend Platz am Anfang \n"
-"der Platte lassen (2048 Sektoren reichen aus)."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Fehler"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistent"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Wählen Sie ein Aktion aus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Sie haben eine große FAT Partition \n"
-"(diese enthält häufig nur Microsoft DOS/Windows).\n"
-"Ich rate Ihnen, diese Partition erst zu verkleinern\n"
-"(Wählen Sie sie an und drücken Sie dann „Größe verändern“)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Bitte klicken Sie auf eine Partition"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Details"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalisierendes FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Auslagerung"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Leer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Andere"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Dateisystemtypen:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Erzeugen"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Typ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Verwenden Sie stattdessen „%s“"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Löschen"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Verwenden Sie erst „umount“"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Nach Änderung des Partitionstyps von %s, werden sämtliche Daten darauf "
-"gelöscht"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Wählen Sie eine Partition"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Wählen Sie eine andere Partition"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Verlassen"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "In den Experten-Modus wechseln"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "In den Normal-Modus wechseln"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Rückgängig"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Wollen Sie trotzdem fortfahren?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Beenden ohne speichern"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Beenden ohne die Partitionstabelle zu speichern?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Möchten Sie die vorgenommenen Änderungen in „/etc/fstab“ speichern?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automatisches Erstellen"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Alles löschen"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Festplatten-Informationen"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Alle Primärpartitionen sind in Gebrauch"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ich kann keinen weiteren Partitionen hinzufügen"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Um mehr Partitionen einrichten zu können, müssen Sie zunächst eine Partition "
-"löschen und anschließend eine erweiterte Partition erzeugen"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Partitionstabelle schreiben"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Partitionstabelle wiederherstellen"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Partitionstabelle retten"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Partitionstabelle neu laden"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Wechselmedien automatisch Einhängen"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Datei auswählen"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Die gesicherte Partitionstabelle hat nicht dieselbe Größe\n"
-"Soll trotzdem fortgefahren werden?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Warnung"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Legen Sie eine Diskette in das Laufwerk\n"
-"Alle Daten auf dieser Diskette werden gelöscht!"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Ich Versuche, die Partitionstabelle zu retten"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Ausführliche Informationen"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Einhängpunkt"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Optionen"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Größe verändern"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Bewegen"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatieren"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Einhängen"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Zum RAID hinzufügen"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Zum LVM hinzufügen"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Aushängen"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Löschen aus dem RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Löschen aus dem LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAID modifizieren"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Als Loopback verwenden"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Erzeuge eine neue Partition"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Anfangssektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Größe in MB:"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Dateisystemtyp: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Einhängpunkt: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Einstellung: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Die Loopback-Datei entfernen?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Partitionstyp ändern"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Welches Dateisystem wollen Sie verwenden?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Konvertiere ext2 zu ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Wo wollen Sie die Loopback-Datei %s einhängen?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Wo wollen Sie das Gerät %s einhängen?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ich kann diesen Einhängpunkt nicht zurücksetzen, da diese Partition als \n"
-"Loopback verwendet wird. Bitte entfernen Sie erst diesen Loopback."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Errechne die Grenzen des FAT Dateisystems"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Neuberechnen der Größe"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Die Größe dieser Partition kann ich nicht ändern"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Sie sollten ein Backup sämtlicher Daten dieser Partition erstellen"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Durch Veränderung der Partitionsgröße von %s, gehen sämtliche Daten darauf "
-"verloren"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Wählen Sie die neue Größe"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Neue Größe in MB:"
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Zu welcher Platte wollen Sie wechseln?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Zu welchem Sektor wollen Sie wechseln?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "wechsele"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Bewege Partition..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Wählen Sie einen vorhandenen RAID"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "Neu"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Wählen Sie einen vorhandenen LVM"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM Name?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Diese Partition kann nicht als Loopback verwendet werden"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Name der Loopback-Datei: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Dateinamen angeben"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Diese Datei wird bereits von einer anderen Loopback-Verknüpfung verwendet, "
-"wählen Sie eine andere Datei."
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr ""
-"Es existiert bereits eine Datei mit diesem Namen. Soll ich sie verwenden?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Einhäng-Optionen"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Verschiedene"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "Gerät"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "Level"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "Blockgröße"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Vorsicht: Diese Aktion ist gefährlich."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Welcher Partitionstyp?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Es tut mir Leid, aber ich weigere mich, eine „/boot“ Partition \n"
-"hinter dem Zylinder 1024 anzulegen.\n"
-"Entweder verwenden Sie LILO und es wird nicht funktionieren, oder Sie "
-"verwenden \n"
-"LILO nicht, dann benötigen Sie keine „/boot“ Partition."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Die Partition, die Sie als Verzeichnisbaumwurzel (/) ausgewählt haben, ist "
-"physikalisch hinter dem 1024ten Zylinder Ihrer Festplatte gelegen und Sie "
-"haben keine „/boot“ Partition eingerichtet. Falls Sie den LILO "
-"Betriebssystemstarter einsetzen wollen, vergessen Sie bitte nicht, eine „/"
-"boot“ Partition anzulegen!"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Sie haben eine Software-RAID-Partition als Verzeichnisbaumwurzel "
-"ausgewählt. \n"
-"Zur Zeit kann kein Betriebssystemstarter damit ohne Verwendung einer \n"
-"„/boot“-Partition arbeiten. Sie sollten also daran denken, eine solche \n"
-"Partition zu erstellen."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Die Partitionstabelle der Platte „%s“ wird gespeichert!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Sie müssen Ihren Rechner neu starten, damit die Veränderungen wirksam werden"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Nach Formatieren der Partition %s, werden sämtliche Daten darauf gelöscht"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatiere"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiere Loopback-Datei %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiere Partition %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Dateien verstecken"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Dateien auf die neue Partition verschieben."
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Das Verzeichnis „%s“ enthält bereits Daten\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Dateien auf die neue Partition verschieben."
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiere: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Entferne: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Die Partition %s heißt nun %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Gerät: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS Laufwerksbuchstabe: %s (vermutlich?)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Typ:"
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Name: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Anfang: Sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Größe: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s Sektoren"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Zylinder %d bis %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatiert\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nicht formatiert\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Eingehängt\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback Datei(en):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition wird standardmäßig geladen\n"
-"    (für MS-DOS Boot, nicht jedoch für LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Level %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Blockgröße %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID Platten %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Dateiname des Loopbacks: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Es besteht die Wahrscheinlichkeit,\n"
-"dass es sich um eine Treiber-\n"
-"Partition handelt. Sie sollten sie\n"
-"daher unverändert lassen.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Diese spezielle Start-Partition\n"
-"ist für die Verwendung mehrerer\n"
-"Betriebssysteme auf dem selben\n"
-"Rechner.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Größe: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s Zylinder, %s Köpfe, %s Sektoren\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM Platten %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabellen Typ: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "auf Bus %d ID %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Optionen: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Dateisystem-Schlüssel"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Wählen Sie Ihren Dateisystem-Schlüssel (Passwort)"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Die Passwörter stimmen nicht überein"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Schlüssel"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Schlüssel (erneut)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Typ ändern"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Bitte wählen Sie ein Medium"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Server suchen"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatieren von %s schlug Fehl"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr ""
-"Ich bin nicht in der Lage, %s mit einem Dateisystem vom Typ %s zu "
-"formatieren."
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "Das Einhängen der Partition %s in das Verzeichnis %s schlug fehl."
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-"Der Dateisystemcheck (fsck) schlug fehl mit dem Rückgabewert %d oder Signal %"
-"d."
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Fehler beim Aushängen von %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "Einfach"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "mit „/usr“"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "Server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-"Sie können JFS nicht für Partitionen verwenden, die kleiner als 16MB sind!"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-"Sie können ReiserFS nicht für Partitionen verwenden, die kleiner als 32MB "
-"sind!"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Einhängpunkte müssen mit einem / beginnen."
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Es gibt bereits eine Partition, mit dem Einhängpunkt %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-"Sie können kein logisches LVM Medium für den Einhängpunkt %s verwenden."
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Dieses Verzeichnis muss in der Verzeichnisbaumwurzel bleiben"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Sie benötigen ein echtes GNU/Linux Dateisystem (Ext2, ReiserFS) für \n"
-"diesen Einhängpunkt.\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Sie können kein verschlüsseltes Medium für den Einhängpunkt %s verwenden."
-
-# ../../diskdrak1
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nicht genug freier Platz, damit ich selbst Partition anlegen kann."
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nichts zu tun."
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fehler beim Öffnen von %s zum Schreiben: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ein Fehler ist aufgetreten - es wurden keine gültigen Geräte gefunden, auf "
-"denen neue Dateisysteme erstellt werden können. Bitte überprüfen Sie Ihre "
-"Hardware(-Konfiguration) auf mögliche Fehler und falsche Einstellungen."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Sie haben keine Partitionen!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux ist ein Mehrbenutzer-System, das bedeutet konkret jedes\n"
-"Benutzerkennzeichen hat eigene Präferenzen (Grafische Umgebung,\n"
-"Programmeinstellungen, etc.), sowie ein eigenes Heim-Verzeichnis, in dem\n"
-"diese Einstellungen gespeichert werden. Falls Sie mehr wissen wollen,\n"
-"können Sie im Benutzerhandbuch nachsehen. Sie können mehrere normale\n"
-"Benutzerkonten einrichten, im Gegensatz zum „privilegierten“ Kennzeichen:\n"
-"»root«, das einmalig ist. Im Gegensatz zu »root« können diese normalen\n"
-"Benutzer jedoch nur ihre eigenen Dateien und Konfigurationen verändern. Sie\n"
-"können sogar mehrere Benutzerkennzeichen pro Person einrichten, denen Sie\n"
-"Zugang zu Ihrem GNU/Linux-System gewähren wollen. Erstellen Sie sich ein\n"
-"eigenes Benutzerkennzeichen, auch wenn Sie der einzige Anwender sind, der\n"
-"diesen Rechner nutzt. Sie sollten nicht ständig mit dem privilegierten\n"
-"Kennzeichen arbeiten! Das ist ein hohes Sicherheitsrisiko! Wenn Sie einen\n"
-"schweren Fehler als einfacher Benutzer machen, dann können Sie maximal\n"
-"Daten verlieren, jedoch nicht Ihr gesamtes System unbrauchbar machen.\n"
-"\n"
-"Zuerst geben Sie bitte einen normalen Namen an. Das muss nicht\n"
-"notwendigerweise Ihr richtiger Name sein. „DrakX“ wird das erste Wort, das\n"
-"Sie eingegeben haben, in das Feld „Benutzerkennzeichen“ eintragen. Dies ist\n"
-"der Name, den Sie zum Anmelden für dieses Kennzeichen benötigen. Natürlich\n"
-"können Sie ihn hier nach Belieben verändern. Dann geben Sie Ihrem Konto ein\n"
-"Passwort. Für ein Benutzerkennzeichen ist dieses zwar nicht von so\n"
-"herausragender Bedeutung wie das für »root«, doch Sie sollten trotzdem\n"
-"etwas Sorgfalt walten lassen. Immerhin sind es Ihre Daten...\n"
-"\n"
-"Klicken Sie auf „Benutzer akzeptieren“, um das Kennzeichen zu erstellen.\n"
-"Anschließend können Sie direkt weitere Benutzer hinzufügen. Wenn Sie allen\n"
-"Kennzeichen erstellt haben, klicken Sie auf „Fertig“.\n"
-"\n"
-"Durch Anwahl der Schaltfläche „Fortgeschritten“ haben Sie auch die\n"
-"Möglichkeit, die Standard-Shell dieses Benutzers ändern (normalerweise ist\n"
-"dies die „Bash“)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Oben sehen Sie die auf Ihrer Festplatte gefundenen Linux-Partitionen. Als\n"
-"normaler Linuxanwender können Sie problemlos die Vorschläge des Assistenten\n"
-"übernehmen. Sollten Sie diesen Vorschlag ändern, müssen Sie zumindest eine\n"
-"Partition als Verzeichnisbaumwurzel („/“) definieren. Wählen Sie keine zu\n"
-"kleine Partition, da sie sonst nicht genug Software installieren können.\n"
-"Falls Sie Ihre persönlichen Daten auf einer getrennten Partition speichern\n"
-"möchten, müssen Sie eine Linux-Partition für ihre persönlichen\n"
-"Verzeichnisse („/home“) definieren (Dies geht natürlich nur, wenn Sie mehr\n"
-"als nur eine Linux Partition haben).\n"
-"\n"
-"Alle Partitionen werden folgendermaßen aufgeführt: „Name“, „Kapazität“\n"
-"\n"
-"„Name“ ist zusammengesetzt aus: „Festplattentyp“, „Festplattennummer“ und\n"
-"„Partitionsnummer“ (etwa, „hda1“ oder „sdb4“).\n"
-"\n"
-"„Festplattentyp“ ist „hd“ falls es sich um einen IDE Platte handelt und\n"
-"„sd“ wenn es eine SCSI Platte ist.\n"
-"\n"
-"„Festplattennummer“ ist der Buchstabe hinter „hd“ oder „sd“. Bei IDE\n"
-"Platten bedeutet:\n"
-"\n"
-" * „a“ - „Master Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „b“ - „Slave Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „c“ - „Master Festplatte am sekundären IDE Kontroller“,\n"
-"\n"
-" * „d“ - „Slave Festplatte am sekundären IDE Kontroller“,\n"
-"\n"
-"Bei SCSI Platten steht „a“ für „erste Festplatte am Bus“, „b“ für „zweite\n"
-"Festplatte am Bus“, etc."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Da die Mandrake Linux-Distribution stetig wächst, wurde sie in mehrere\n"
-"CD-ROMs unterteilt. Es kann daher vorkommen, dass „DrakX“ Pakete von\n"
-"anderen, als der Installations-CD-ROM installieren will. In diesem Fall\n"
-"wird es die aktuelle CD-ROM auswerfen und nach einer anderen fragen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Nun ist es Zeit sich zu entscheiden, welche Programme Sie auf Ihrem Rechner\n"
-"installieren wollen. Es gibt tausende von Paketen für Mandrake Linux, und\n"
-"Sie müssen sie nicht alle auswendig kennen.\n"
-"\n"
-"Wenn Sie eine klassische CD-ROM-Installation vornehmen, werden Sie zuerst\n"
-"nach den Ihnen zur Verfügung stehenden CDs gefragt (nur im Expertenmodus).\n"
-"Markieren Sie die Zeilen anhand der CDs die Sie vorliegen haben und klicken\n"
-"Sie auf die Schaltfläche „OK“.\n"
-"\n"
-"Die Pakete sind nach ihrer Verwendung in Gruppen eingeteilt. Diese Gruppen\n"
-"wiederum enthalten vier Abschnitte:\n"
-"\n"
-" * „Arbeitsplatzrechner“: Falls Ihr Rechner als Arbeitsplatzrechner\n"
-"verwendet werden soll, markieren Sie eine oder mehrere Gruppen.\n"
-"\n"
-" * „Entwicklungsplattform“: Falls Sie mit Ihrem Rechner programmieren\n"
-"wollen, sollten Sie diese Gruppe markieren.\n"
-"\n"
-" * „Server“: Wenn Ihre Maschine ein Server werden soll, können Sie hier die\n"
-"wichtigsten Dienste auswählen, die auf Ihren Rechner installiert werden\n"
-"sollen.\n"
-"\n"
-" * „Grafische Oberfläche“: Wählen Sie hier Ihre bevorzugte grafische\n"
-"Arbeitsoberfläche. Wenn Sie eine grafische Oberfläche verwenden wollen, so\n"
-"müssen Sie hier zumindest eine Gruppe auswählen.\n"
-"\n"
-"Wenn Sie die Maus über eine Gruppe bewegen, erhalten Sie einen kurzen\n"
-"erklärenden Text über die Gruppe. Falls Sie bei einer Installation alle\n"
-"Markierungen entfernen, erscheint ein Dialog, in dem Sie zwischen\n"
-"verschiedenen Minimalinstallationen wählen können.\n"
-"\n"
-" * „Mit X“ Installiert eine rudimentäre grafische Oberfläche;\n"
-"\n"
-" * „Mit minimaler Dokumentation“ Installiert das Basissystem zuzüglich\n"
-"grundlegender Werkzeuge inklusive deren Dokumentation. Dies ist die\n"
-"sinnvollste Wahl für eine Serverinstallation.\n"
-"\n"
-" * „Extrem minimale Installation“ Sie erhalten eine komplett „nackte“\n"
-"Linux-Distribution (speziell auch ohne urpmi!). Es versteht sich von\n"
-"selbst, dass das nur eine Kommandozeileninstallation sein kann.\n"
-"\n"
-"Wenn Sie die Schaltfläche „Fortgeschritten“ anwählen, erhalten Sie die\n"
-"Möglichkeit, eine „Individuelle Paketauswahl“ durchzuführen. Das macht nur\n"
-"Sinn, wenn Sie die Pakete genau kennen oder wenn Sie volle Kontrolle\n"
-"darüber haben wollen, was installiert werden soll.\n"
-"\n"
-"Haben Sie die Installation als „Aktualisierung“ gestartet, können Sie die\n"
-"Markierungen aller Gruppen entfernen, um die Installation neuer Pakete zu\n"
-"vermeiden. Hierdurch werden nur bereits installierte Pakete aktualisiert\n"
-"oder repariert."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Schlussendlich erhalten Sie (falls Sie sich für „Individuelle Paketauswahl“\n"
-"entschieden haben) eine Baumliste aller Pakete die zu den von Ihnen\n"
-"gewünschten Gruppen gehören. Diese Pakete sind nach Gruppen und\n"
-"Untergruppen klassifiziert. Beim Durchstöbern des Baums, können Sie\n"
-"Gruppen, Untergruppen oder einzelne Pakete markieren oder deren Markierung\n"
-"entfernen.\n"
-"\n"
-"Sobald Sie ein Paket auswählen, erscheint rechts eine kurze Beschreibung.\n"
-"Sobald Sie die Auswahl abgeschlossen haben, bestätigen Sie das durch\n"
-"Drücken der Schaltfläche „Installation“. Nun beginnt die eigentliche\n"
-"Installation. Falls Sie eine Vielzahl von Paketen installieren wollen,\n"
-"können Sie nun getrost einen Kaffee trinken gehen.\n"
-"\n"
-"!! Es kommt vor, dass Server- und Dienst-Pakete angewählt wurden - entweder\n"
-"absichtlich, oder als Paket einer ganzen Gruppe; sollte das der Fall sein,\n"
-"werden Sie nun gefragt, ob Sie diese wirklich installiert haben wollen.\n"
-"Unter Mandrake Linux werden installierte Server und Dienste automatisch\n"
-"beim Betriebssystemstart gestartet. Selbst wenn zum Zeitpunkt, als die\n"
-"Distribution zusammengestellt wurde, keine Sicherheitslücken oder Fehler in\n"
-"diesen Paketen bekannt waren, ist natürlich nicht auszuschließen, dass\n"
-"später solche Fehler gefunden werden. Sollten Sie also nicht wissen, wovon\n"
-"hier die Rede ist, wählen Sie sicherheitshalber lieber „Nein“. Falls Sie\n"
-"mit „Ja“ antworten, werden die Dienste und Server installiert und stehen\n"
-"Ihnen nach der Installation standardmäßig zur Verfügung. !!\n"
-"\n"
-"Die Option „Automatische Abhängigkeiten“ unterdrückt nur die Warnungen, die\n"
-"erscheinen, wenn das Installationsprogramm Pakete automatisch markiert, um\n"
-"Paketabhängigkeiten aufzulösen, wenn Sie ein Paket auswählen.\n"
-"\n"
-"Das kleine Diskettensymbol am unteren Rand der Liste ermöglicht es Ihnen,\n"
-"die während einer vorangegangenen Installation gespeicherte Paketauswahl\n"
-"erneut zu verwenden. Durch Betätigen der Schaltfläche öffnen Sie einen\n"
-"Dialog, der Sie auffordert, die Diskette einzulegen, die die Auswahl der\n"
-"früheren Installation enthält. Um zu erfahren, wie Sie diese Diskette\n"
-"erstellen, lesen Sie bitte den zweiten Tipp des vorangegangenen\n"
-"Installationsschrittes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Wenn Sie Ihren Computer mit dem Internet oder mit einem lokalen Netzwerk\n"
-"verbinden wollen, dann wählen Sie bitte die entsprechende Option aus. Bitte\n"
-"schalten Sie jedoch zuvor, falls nötig, die dafür benötigten Geräte ein,\n"
-"damit „DrakX“ sie automatisch erkennen kann.\n"
-"\n"
-"Mandrake Linux bietet Ihnen die Möglichkeit, Ihre Internet-Verbindung\n"
-"bereits während der Installation zu konfigurieren. Zur Auswahl stehen\n"
-"folgende Verbindungsarten: Herkömmliches Modem, ISDN Modem, ADSL\n"
-"Verbindung, Kabelmodem oder eine einfache LAN Verbindung (Ethernet).\n"
-"\n"
-"Wir wollen hier nicht weiter ins Detail gehen, nur soviel: Stellen Sie\n"
-"sicher, dass sie die nötigen Parameter von Ihrem Internet Provider oder\n"
-"Systemadministrator erhalten haben.\n"
-"\n"
-"Weitere Einzelheiten, die hier bereits hilfreich sein können, erhalten Sie\n"
-"im Kapitel DrakNet. Falls Sie unsicher sind, warten Sie ab, bis die\n"
-"Installation beendet ist und verwenden Sie danach das beschriebene\n"
-"Programm, um Ihre Verbindung einzurichten.\n"
-"\n"
-"Wenn Sie Ihr Netzwerk erst nach Abschluss der Installation einrichten\n"
-"wollen oder sobald Sie die Konfiguration beendet haben, klicken Sie auf\n"
-"„Abbrechen“."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Als nächstes können Sie die Dienste auswählen, die während des\n"
-"Betriebssystemstarts aktiviert werden sollen.\n"
-"\n"
-"Hier werden alle Dienste, die nach der aktuellen Installation zum BS-Start\n"
-"zur Verfügung stehen, angezeigt. Lesen Sie diese Liste sorgfältig durch und\n"
-"markieren Sie nur die Dienste, die Sie immer ab dem BS-Start zur Verfügung\n"
-"haben wollen.\n"
-"\n"
-"Wenn Sie einen Dienst anwählen, erhalten Sie eine kurze Erklärung dazu.\n"
-"Wenn Sie nicht sicher sind, ob ein Dienst bzw. Server sinnvoll ist oder\n"
-"nicht, verändern Sie am Besten die voreingestellten Markierungen nicht.\n"
-"\n"
-"!! Sollten Sie Ihren Rechner als Server verwenden wollen, so müssen Sie an\n"
-"dieser Stelle besonders vorsichtig sein: wählen Sie alle Dienste ab, die\n"
-"Sie nicht benötigen. Denken Sie daran, dass etliche Dienste eine\n"
-"potentielle Einbruchstelle in das System von außen darstellen, wenn diese\n"
-"im Serverbetrieb laufen. Also, nur die Dienste einschalten, die Sie\n"
-"wirklich brauchen! !!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux arbeitet mit GMT (Greenwich Mean Time) und übersetzt diese anhand\n"
-"der Zeitzone in Ihre lokale Zeit.\n"
-"\n"
-"Da MicrosoftWindows(TM) nicht sinnvoll mit GMT umgehen kann, müssen Sie\n"
-"„Nein“ wählen, falls Sie auch ein Betriebssystem aus dem Hause Microsoft\n"
-"auf Ihrem Rechner „beherbergen“\n"
-"\n"
-"Die Verwendung der Option „Automatische Zeit-Synchronisation“ reguliert\n"
-"Ihre Uhr, indem sie Verbindung mit einem Zeitserver im Internet aufnimmt.\n"
-"Wählen Sie aus der Liste einen Server in Ihrer Nähe. Damit die funktioniert\n"
-"benötigen Sie eine ständige Internetverbindung."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (das X Window System) ist das Herz der grafischen Benutzeroberfläche von\n"
-"GNU/Linux. Es bildet die Grundlage für die Vielzahl grafischer\n"
-"Benutzerumgebungen, die Mandrake Linux Ihnen anbietet (wie etwa KDE, GNOME,\n"
-"AfterStep oder WindowMaker). Auch hier wird „DrakX“ die Konfiguration\n"
-"soweit wie möglich selbstständig vollziehen.\n"
-"\n"
-"Sollten Sie nicht gerade sehr alte, sehr neue oder exotische Grafikhardware\n"
-"einsetzen, wird „DrakX“ die Konfiguration erfolgreich durchführen und\n"
-"anschließend die grafische Oberfläche mit der bestmöglichen Auflösung\n"
-"starten! Es erscheint ein Testfenster und Sie werden anschließend gefragt,\n"
-"ob die Anzeige einwandfrei war.\n"
-"\n"
-"Falls Sie eine „Experte“n-Installation vornehmen, werden Sie in den\n"
-"folgenden Schritten von dem „DrakX“-Konfigurationsassistenten begleitet.\n"
-"\n"
-"Falls das Bild korrekt dargestellt wird, wählen Sie bitte die Schaltfläche\n"
-"„Ja“ an, „DrakX“ wird dann mit dem nächsten Schritt der Installation\n"
-"fortfahren. Sollte der Schirm aus irgendwelchen Gründen nicht lesbar sein,\n"
-"müssen Sie nur 10 Sekunden warten. Anschließend sollte wieder das\n"
-"Konfigurationsmenü erscheinen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Es kann Ihnen passieren, dass der erste Versuch noch nicht korrekt ist (Der\n"
-"Schirm ist zu klein, liegt zu weit rechts oder links...). Daher werden Sie\n"
-"selbst dann mit der Frage konfrontiert, wenn der „DrakX“-Server sich\n"
-"starten lies, „DrakX“ also davon ausgehen könnte, dass alles in Ordnung\n"
-"ist. Sie erhalten daher eine Liste von gültigen Modi, aus denen Sie\n"
-"versuchen sollten den besten auszuwählen.\n"
-"\n"
-"Sollten alle stricke reißen, und „DrakX“ immer noch nicht laufen, wählen\n"
-"Sie einfach im Untermenü „Grafikkarte ändern“, den Punkt „Nicht\n"
-"aufgeführt“. Wenn Sie dann nach dem Server gefragt werden, wählen Sie den\n"
-"„FBDev“: Diese Variante sollte mit allen modernen Grafikkarten\n"
-"funktionieren. Ein „Nochmals testen“ sollte Gewissheit bringen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Letztlich werden Sie gefragt, ob sie direkt in die grafische Oberfläche\n"
-"starten wollen. Diese Frage wird auch erscheinen, wenn Sie das Testen der\n"
-"Konfiguration übersprungen haben. Schlug die Konfiguration der grafischen\n"
-"Umgebung fehl oder wollen Sie den Rechner als Server laufen lassen, geben\n"
-"Sie natürlich „Nein“ an."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Die Mandrake LinuxCD-ROM hat einen eingebauten Rettungsmodus. Sie erreichen\n"
-"ihn durch Starten von CD-ROM, und Drücken von »F1« bei Bootbeginn. Geben\n"
-"Sie dann »rescue« an der Eingabeaufforderung ein. Falls Ihr Rechner nicht\n"
-"von CD-ROM starten kann, sollten Sie diesen Punkt unbedingt aus zwei\n"
-"Gründen abarbeiten:\n"
-"\n"
-" * Wenn „DrakX“ den Betriebssystemstarter installiert, schreibt es den\n"
-"Boot-Sektor (MBR) Ihrer primären Festplatte neu (außer Sie wollen einen\n"
-"anderen Betriebssystemstarter verwenden), damit Sie die verschiedenen,\n"
-"vorhandenen Betriebssysteme starten können (etwa Windows und GNU/Linux).\n"
-"Sollten Sie etwa Windows neu installieren, wird dieses - ohne Sie zu fragen\n"
-"- Ihren Boot-Sektor überschreiben. Somit werden Sie Ihr GNU/Linux nicht\n"
-"mehr starten können! Mit einer Startdiskette können Sie Ihr\n"
-"GNU/Linux-System dann trotzdem hochfahren und diese Änderungen rückgängig\n"
-"machen.\n"
-"\n"
-" * Sollten Ihnen andere schwerwiegende Systemfehler das Starten von\n"
-"GNU/Linux von der Festplatte unmöglich machen, ist diese Startdiskette so\n"
-"ziemlich die einzige Möglichkeit, auf Ihr System zuzugreifen. Zudem enthält\n"
-"sie eine Anzahl von Systemprogrammen, die Ihnen bei der Behebung von\n"
-"Systemfehlern (nach einem Stromausfall, einen unglücklichen Tippfehler in\n"
-"einem Passwort, etc.) helfen werden.\n"
-"\n"
-"Wenn Sie diesen Schritt anwählen, wird „DrakX“ Sie bitten, eine Diskette in\n"
-"ein Laufwerk zu legen. Die Diskette sollte natürlich leer sein (zumindest\n"
-"keine relevanten Daten enthalten). Sie muss nicht formatiert sein, „DrakX“\n"
-"kümmert sich um alles."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Sie müssen nun entscheiden, wo auf Ihrer/n Festplatte(n) Ihr Mandrake Linux\n"
-"System installiert werden soll. Sofern alles leer ist bzw. ein\n"
-"Betriebssystem alles belegt, müssen die Platte(n) neu partitioniert werden.\n"
-"Prinzipiell besteht das Partitionieren der Platte(n) darin, den\n"
-"Plattenplatz so aufzuteilen, dass Ihr Mandrake Linux darauf installiert\n"
-"werden kann.\n"
-"\n"
-"Da dieser Schritt normalerweise irreversibel ist, kann das Partitionieren\n"
-"für unerfahrene Anwender unangenehm und stressig sein. Dieser Assistent\n"
-"kann Ihnen diesen Schritt abnehmen. Lesen Sie dennoch vor Beginn im\n"
-"Handbuch die entsprechenden Passagen und lassen Sie sich Zeit mit der\n"
-"Entscheidung.\n"
-"\n"
-"Wenn Sie die Installation im Expertenmodus durchführen, werden Sie nun das\n"
-"Mandrake Linux Partitionier-Werkzeug kennen lernen: „DiskDrake“. Es erlaubt\n"
-"Ihnen Ihre Partitionen genau auf Ihre Bedürfnisse abzustimmen. Falls Sie\n"
-"keine Ahnung haben, wie Sie die Festplatte partitionieren sollen, wählen\n"
-"Sie die Schaltfläche „Assistent“ und überlassen diesem damit die gesamte\n"
-"Arbeit.\n"
-"\n"
-"Sollten Sie bereits Partitionen haben (etwa von einer alten GNU/Linux\n"
-"Installation oder solche, die mit einem anderen Partitionierungswerkzeug\n"
-"erstellt wurden), die Sie für die Installation von Mandrake Linux verwenden\n"
-"wollen, wählen Sie diese hier einfach aus.\n"
-"\n"
-"Falls noch keine Partitionen existieren, müssen Sie sie erstellen.\n"
-"Verwenden Sie dafür obigen Assistenten. Abhängig vom aktuellen Zustand\n"
-"Ihrer Platte(n) haben Sie verschiedene Alternativen:\n"
-"\n"
-" * „Freien Platz verwenden“: Dies führt einfach dazu, dass Ihre leere(n)\n"
-"Festplatte(n) automatisch partitioniert werden; Sie müssen sich also um\n"
-"nichts weiter kümmern.(*)\n"
-"\n"
-" * „Verwende existierende“: Der Assistent hat eine oder mehrere "
-"existierende\n"
-"Linux Partitionen auf Ihrer Platte gefunden. Wählen Sie diese Schaltfläche,\n"
-"falls Sie sie behalten wollen.\n"
-"\n"
-" * „Komplette Platte löschen“: Falls Sie alle Daten Ihrer Platte verlieren,\n"
-"und sie durch Ihr neues Mandrake Linux System ersetzen wollen, wählen Sie\n"
-"diese Schaltfläche. Beachten Sie, dass dieser Schritt nicht rückgängig\n"
-"gemacht werden kann.\n"
-"\n"
-" * „Freien Platz der Windows Partition verwenden“: Falls der gesamte\n"
-"Plattenplatz aktuell für MicrosoftWindows(TM) verschwendet ist, müssen Sie\n"
-"für Linux Platz schaffen. Um dies zu erreichen, können Sie entweder Ihre\n"
-"MicrosoftWindows(TM) Partition(en) samt Daten löschen (siehe „Komplette\n"
-"Platte löschen“ oder „Experten-Modus“) oder Ihre Windows Partition\n"
-"verkleinern. Letzteres geht ohne Datenverlust. Sie sollten diese Variante\n"
-"wählen, falls Sie beide Betriebssysteme (Windows und Mandrake Linux)\n"
-"nebeneinander nutzen wollen.\n"
-"\n"
-"   Bevor Sie sich für diese Variante entscheiden, sei hier noch einmal "
-"betont,\n"
-"dass das bedeutet, Sie haben weniger Platz für Windows als momentan.\n"
-"\n"
-" * „Windows(TM) löschen“: Bei dieser Variante werden alle Windows\n"
-"Partitionen gelöscht und die Platte(n) komplett neu partitioniert.\n"
-"\n"
-"   !! Alle Daten auf den Platten gehen dadurch verloren! !!\n"
-"\n"
-" * „Expertenmodus“: Wenn Sie Ihre Festplatte selber von Hand partitionieren\n"
-"wollen, dann können Sie diese Option wählen. Seien Sie bitte sehr\n"
-"sorgfältig, wenn Sie diese Lösung wählen, da Sie zwar alle möglichen\n"
-"Einstellungen vornehmen, aber gleichzeitig auch sehr leicht Daten verlieren\n"
-"können. Diese Option ist nur geeignet, wenn Sie wissen, was Sie tun.\n"
-"\n"
-"(*) In Deutschland ist es quasi unmöglich, Komplettrechner mit leeren\n"
-"Festplatten zu erhalten, da laut Gesetz nur Rechner mit BS verkauft werden\n"
-"dürfen. Diese Regelung stammt noch aus der Zeit, als Politiker nur\n"
-"proprietäre kommerzielle BSe kannten und sich nicht vorstellen konnten,\n"
-"dass es freie und sogar kostenlose Alternativen gibt. Jeder Käufer eines\n"
-"Komplettrechners ohne BS wurde quasi mit einem Raubkopierer von Produkten\n"
-"aus Redmond gleichgesetzt."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Nun ist es soweit, die Installation ist abgeschlossen und Ihr neues\n"
-"Betriebssystem sollte einsatzbereit sein. Bei einem Neustart können Sie\n"
-"zwischen den auf Ihrer Platte installierten Betriebssystemen auswählen.\n"
-"Klicken Sie nur noch auf „OK“ und das System wird neu gestartet.\n"
-"\n"
-"Die Schaltfläche „Fortgeschritten“ liefert zwei weitere Schaltflächen:\n"
-"\n"
-" * „Erstellen einer Auto-Installationsdiskette“: Hiermit können Sie eine\n"
-"Installationsdiskette erstellen, mit deren Hilfe Sie eine identische\n"
-"automatische Installation ohne Interaktion eines Administrators\n"
-"durchzuführen können.\n"
-"\n"
-"   Es gibt zwei verschiedene Alternativen, nachdem Sie diese Schaltfläche\n"
-"aktiviert haben:\n"
-"\n"
-"    * „Erneut abspielen“: Diese Installation ist nur teilweise automatisch, "
-"da\n"
-"der Partitionierungsschritt (aber nur dieser!) immer noch interaktiv\n"
-"vonstatten geht.\n"
-"\n"
-"    * „Automatisiert“: Vollautomatische Installation: Die Festplatte wird\n"
-"vollständig reorganisiert. Alle darauf vorhandenen Daten gehen verloren!\n"
-"\n"
-"   Diese Funktion ist besonders nützlich, wenn man eine Menge von "
-"identischer\n"
-"Rechner einrichten will. Weitere Informationen erhalten Sie auch auf der\n"
-"Seite Auto install\n"
-"\n"
-" * „Paketauswahl speichern“: (*) Sie speichern damit die Paketauswahl, die\n"
-"Sie vorher getroffen haben. Wenn Sie später eine erneute Installation\n"
-"vornehmen wollen, legen Sie einfach die Diskette ins Laufwerk und starten\n"
-"Sie die Installation mittels [F1] an der ersten Eingabeaufforderung. Geben\n"
-"Sie dann »linux defcfg=\"floppy\"« ein.\n"
-"\n"
-"(*) Sie benötigen eine FAT formatierte Diskette (Mittels „mformat a:“\n"
-"können Sie unter GNU/Linux eine solche erstellen)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Alle neu angelegten Partitionen müssen formatiert (= ein Dateisystem darauf\n"
-"erzeugt) werden, bevor Sie sie verwenden können.\n"
-"\n"
-"Möglicherweise wollen Sie auch einige bereits existierende Partitionen\n"
-"formatieren, um alle darauf vorhandenen Daten zu löschen. Falls ja,\n"
-"markieren Sie diese ebenfalls.\n"
-"\n"
-"Es sei angemerkt, dass bereits existierende Partitionen nicht erneut\n"
-"formatiert werden müssen. Sie sollten Partitionen, die Teile des\n"
-"Betriebssystems enthalten neu formatieren (etwa „/“, „/usr“ oder „/var“),\n"
-"Partitionen mit Ihren privaten Daten (normalerweise „/home“) sollten Sie\n"
-"jedoch nicht neu formatieren.\n"
-"\n"
-"Seien Sie in diesem Schritt sehr sorgfältig. Nach dem Formatieren einer\n"
-"Partition ist der komplette Inhalt unwiederbringlich gelöscht!\n"
-"\n"
-"Wählen Sie „OK“, sobald Sie bereit sind die Partitionen zu formatieren.\n"
-"\n"
-"Wählen Sie „Abbruch“, falls Sie andere Partitionen verwenden wollen, um Ihr\n"
-"Mandrake Linux darauf zu installieren.\n"
-"\n"
-"Wählen Sie „Fortgeschritten“, um die Möglichkeit zu erhalten, Partitionen\n"
-"anzugeben, die auf defekte Blöcke untersucht werden sollen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Ihre neue Mandrake Linux Distribution wird nun installiert. Das dauert\n"
-"einige Minuten (abhängig von der Anzahl zu installierender Pakete und der\n"
-"Geschwindigkeit Ihres Rechners).\n"
-"\n"
-"Bitte haben Sie etwas Geduld."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Es ist sehr wahrscheinlich, dass zum Zeitpunkt Ihrer Mandrake Linux\n"
-"Installation bereits einige Pakete aktualisiert wurden, etwa da noch Fehler\n"
-"entdeckt und beseitigt wurden oder da in Paketen Sicherheitslücken entdeckt\n"
-"wurden, für die bereits Lösungen existieren. Um von diesen aktualisierten\n"
-"Paketen Gebrauch zu machen, wird Ihnen nun angeboten, diese aus dem\n"
-"Internet nachzuladen. Betätigen Sie die Schaltfläche „Ja“, wenn Sie einen\n"
-"Internetzugang haben, um die Pakete zu installieren, andernfalls betätigen\n"
-"Sie die Schaltfläche „Nein“. Sie können diese Pakete natürlich auch\n"
-"jederzeit nach der Installation noch installieren.\n"
-"\n"
-"Betätigen der Schaltfläche „Ja“ zeigt Ihnen eine Liste von Servern, von\n"
-"denen Sie die Aktualisierungen herunterladen können. Wählen Sie einen in\n"
-"Ihrer Nähe. Sie erhalten dann einen Paketauswahldialog: Kontrollieren Sie\n"
-"die Auswahl und bestätigen Sie diese durch Betätigen von „Installieren“.\n"
-"Die Pakete werden nun angefordert und installiert. Sollten Sie das nicht\n"
-"wünschen, betätigen Sie einfach die Schaltfläche „Abbruch“."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Lesen Sie bitte aufmerksam die die Lizenz, bevor Sie fortfahren. Sie\n"
-"umfasst die gesamte Mandrake Linux Distribution. Sollten Sie nicht in allen\n"
-"Punkten zustimmen, betätigen Sie bitte die Schaltfläche „Zurückweisen“, um\n"
-"die Installation abzubrechen. Um mit der Installation fortzufahren\n"
-"betätigen Sie die Schaltfläche „Akzeptieren“."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nun ist es an der Zeit, die gewünschte Sicherheitsebene für Ihr System\n"
-"festzulegen. Als Faustregel sollte hier dienen: Je zugänglicher die\n"
-"Maschine ist und je kritischer die auf ihr gesicherten Daten sind, desto\n"
-"höher sollte die Sicherheitsebene sein. Andererseits geht die gewonnene\n"
-"Sicherheit zulasten der Benutzerfreundlichkeit und Einfachheit, mit der\n"
-"gewisse Befehle/Abläufe durchgeführt werden können. Ausführlichere\n"
-"Erläuterungen zu den verschiedenen Sicherheitsebenen erhalten Sie im\n"
-"Kapitel MSEC des Referenzhandbuchs.\n"
-"\n"
-"Sollten Sie sich an dieser Stelle nicht sicher sein, so behalten Sie die\n"
-"Standardeinstellung bei."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Sie müssen nun entscheiden auf welche Partition(en) Ihr neues Mandrake\n"
-"Linux System installiert werden soll. Falls bereits Partitionen existieren\n"
-"(etwa von einer früheren Installation von GNU/Linux oder durch das Erzeugen\n"
-"mit einem anderen Partitionierungswerkzeug), können Sie diese verwenden.\n"
-"Anderenfalls müssen Sie Partitionen definieren.\n"
-"\n"
-"Um Partitionen zu erzeugen müssen Sie erst eine Festplatte wählen. Sie\n"
-"können die Platte wählen in dem Sie „hda“ für die erste IDE-Platte wählen,\n"
-"„sda“ für die erste SCSI-Platte, usw.\n"
-"\n"
-"Um die gewählte Platte zu partitionieren stehen folgende Möglichkeiten zur\n"
-"Verfügung:\n"
-"\n"
-" * „Alles löschen“: Betätigen dieser Schaltfläche löscht alle Partitionen\n"
-"auf der markierten Festplatte.\n"
-"\n"
-" * „Automatisches Erstellen“: Diese Schaltfläche erstellt automatisch Ext2-\n"
-"und Swap-Partitionen im ungenutzten Bereich Ihrer Festplatte.\n"
-"\n"
-" * „Partitionstabelle retten“: Falls Ihre Partitionstabelle defekt ist,\n"
-"können Sie durch Drücken dieser Schaltfläche versuchen Sie wieder\n"
-"herzustellen. Seien Sie vorsichtig und denken Sie immer daran, dass dieser\n"
-"Versuch misslingen kann.\n"
-"\n"
-" * „Rückgängig“: Mit dieser Schaltfläche können Sie alle Einstellungen\n"
-"rückgängig machen.\n"
-"\n"
-" * „Neu laden“: Sie können durch Betätigen dieser Schaltfläche alle\n"
-"Einstellungen rückgängig machen und die (noch bestehende) Partitionstabelle\n"
-"neu laden.\n"
-"\n"
-" * „Assistent“: Falls Sie keine Ahnung haben wie Sie die Festplatte\n"
-"partitionieren sollen, wählen Sie diese Schaltfläche. Sie überlassen damit\n"
-"die gesamte Arbeit unserem Assistenten, der mittels „Abra Kadabra“(TM) Ihre\n"
-"Platte partitioniert.\n"
-"\n"
-" * „Von Diskette wiederherstellen“: Falls Sie Ihre Partitionstabelle vor\n"
-"Beginn auf eine Diskette gespeichert haben, können Sie sie mittels dieser\n"
-"Schaltfläche wieder zurückschreiben.\n"
-"\n"
-" * „Auf Diskette speichern“: Falls Sie Ihre aktuelle Partitionstabelle auf\n"
-"Diskette speichern wollen, falls Sie sie später wiederherstellen wollen,\n"
-"können Sie das mit Hilfe dieser Schaltfläche tun.\n"
-"\n"
-" * „Fertig“: Nachdem Sie das Partitionieren Ihrer Festplatte beendet haben,\n"
-"aktivieren Sie diese Schaltfläche, um Ihre Änderungen zu speichern.\n"
-"\n"
-"Information: Sie können alle Einstellungen per Tastatur vornehmen. Sie\n"
-"können sich mittels [Tab] und den Pfeiltasten bewegen.\n"
-"\n"
-"Wenn eine Partition ausgewählt ist, können Sie mittels:\n"
-"\n"
-" * [Strg]-[C] - eine neue Partition erstellen (wenn Sie auf einer leeren\n"
-"Partition sind)\n"
-"\n"
-" * [Strg]-[D] - die Partition löschen\n"
-"\n"
-" * [Strg]-[M] - dem Einhängpunkt festlegen\n"
-"\n"
-"Falls Sie die Installation auf einem PPC-Rechner vornehmen, sollten Sie\n"
-"eine mindestens 1 MB große HFS Start-Partition für den\n"
-"Betriebssystemstarter „Yaboot“ erstellen. Wenn Sie diese Partition etwas\n"
-"größer dimensionieren, etwa 50 MB, haben Sie einen geeigneten Platz, um\n"
-"einen Rettungskern samt RamDisk abzulegen, um in Notfällen starten zu\n"
-"können."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Es wurde mehr als nur eine MicrosoftWindows(TM) Partition auf Ihrer Platte\n"
-"gefunden. Bitte wählen Sie welche Sie verkleinern wollen, um Ihr neues\n"
-"Betriebssystem Mandrake Linux installieren zu können.\n"
-"\n"
-"Zu Ihrer Information sind alle Partitionen folgendermaßen aufgeführt:\n"
-"„Linuxname“, „Windowsname“, „Kapazität“.\n"
-"\n"
-"„Linuxname“ ist zusammengesetzt aus: „Festplattentyp“, „Festplattennummer“\n"
-"und „Partitionsnummer“ (etwa, „hda1“ oder „sdb4“).\n"
-"\n"
-"„Festplattentyp“ ist „hd“ falls es sich um einen IDE Platte handelt und\n"
-"„sd“ wenn es eine SCSI Platte ist.\n"
-"\n"
-"„Festplattennummer“ ist der Buchstabe hinter „hd“ oder „sd“. Bei IDE\n"
-"Platten bedeutet:\n"
-"\n"
-" * „a“ - „Master Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „b“ - „Slave Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „c“ - „Master Festplatte am sekundären IDE Kontroller“,\n"
-"\n"
-" * „d“ - „Slave Festplatte am sekundären IDE Kontroller“.\n"
-"\n"
-"Bei SCSI Platten steht „a“ für „erste Festplatte am Bus“, „b“ für „zweite\n"
-"Festplatte am Bus“, etc.\n"
-"\n"
-"„Windowsname“ ist der Laufwerksbuchstabe, wie er von Windows vergeben wird\n"
-"(die erste FAT Partition der ersten Platte heißt „C:“)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Bitte gedulden Sie sich etwas. Es kann einige Minuten dauern."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"„DrakX“ fragt Sie nun nach der gewünschten Installationsart. Sie haben die\n"
-"Wahl zwischen einer Standardinstallation („Empfehlenswert“) und einer\n"
-"Variante, in der Sie mehr Einfluss ausüben können („Experte“). Sie müssen\n"
-"sich nun auch entscheiden, ob Sie eine Installation oder eine\n"
-"Aktualisierung einer bereits vorhandenen Mandrake Linux-Version vornehmen\n"
-"wollen. Es ist möglich, die Installation über ein existierendes BS zu\n"
-"installieren und dieses damit zu entfernen. Sie können auch eine\n"
-"Aktualisierung vornehmen, um eine existierende Installation zu reparieren.\n"
-"Wählen Sie:\n"
-"\n"
-" * „Installieren“: Entfernt komplett ältere Versionen von Mandrake Linux,\n"
-"die noch installiert sind um genau zu sein können Sie je nach aktuellem\n"
-"Inhalt Ihrer Platte auch einige ältere Linux- oder anderweitige Partitionen\n"
-"unangetastet behalten.\n"
-"\n"
-" * „Aktualisieren“: Mit dieser Variante können Sie eine existierende\n"
-"Mandrake Linux Version aktualisieren. Die Partitionstabellen sowie die\n"
-"persönlichen Verzeichnisse der Anwender bleiben erhalten. Alle anderen\n"
-"Installationsschritte werden wie bei einer Installation ausgeführt.\n"
-"\n"
-" * „Nur Pakete aktualisieren“: In dieser Variante werden alle Schritte der\n"
-"Installation, bis auf die Auswahl der zu installierenden Pakete,\n"
-"übersprungen.\n"
-"\n"
-"Je nachdem, wie viel Erfahrung Sie mit GNU/Linux haben, können Sie sich für\n"
-"eine der folgenden Installations- oder Aktualisierungsarten für Ihr\n"
-"Mandrake Linux System entscheiden:\n"
-"\n"
-" * Empfehlenswert: Falls Sie noch nie ein GNU/Linux Betriebssystem\n"
-"installiert haben. Die Installation wird sehr einfach sein und es werden\n"
-"Ihnen nur sehr wenige Fragen gestellt werden.\n"
-"\n"
-" * Experte: Wenn Sie den Umgang mit GNU/Linux „im Schlaf“ beherrschen und\n"
-"hochgranulare Wahlmöglichkeiten wünschen, ist dies Ihre\n"
-"Installationsmethode. Wie bei der benutzerdefinierten Installation können\n"
-"Sie die hauptsächliche Verwendung festlegen: „Arbeitsplatzrechner“,\n"
-"„Entwicklungsplattform“ oder „Server“. Seien Sie sehr vorsichtig, wenn Sie\n"
-"sich für diese Installationsklasse entscheiden. Die Antworten auf einige\n"
-"Fragen können sehr schwierig sein und Auswirkungen auf Sicherheit und\n"
-"Stabilität Ihrer Distribution haben. Wählen Sie diese Installationsklasse\n"
-"also wirklich nur wenn Sie wissen, was Sie tun!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"„DrakX“ wird aufgrund Ihrer Sprachauswahl das für Sie passende\n"
-"Tastaturlayout bereits ausgewählt haben, Sie sollten diesen Schritt\n"
-"eigentlich nicht einmal angezeigt bekommen. Doch vielleicht sind Sie mit\n"
-"dieser Auswahl nicht zufrieden (wenn Sie beispielsweise eine vom Layout\n"
-"abweichende Sprache bevorzugen). Dann gehen Sie zu diesem\n"
-"Konfigurationsschritt zurück und wählen Sie ein passendes Layout aus der\n"
-"Liste.\n"
-"\n"
-"Sollten Sie eine andere als die zur gewählten Sprache gehörende Tastatur\n"
-"verwenden wollen, wählen Sie die Schaltfläche „Mehr“. Sie erhalten dann\n"
-"eine Liste aller unterstützten Tastaturen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Wählen Sie Ihre bevorzugte Sprache für den Installationsvorgang und\n"
-"Systemlaufzeit.\n"
-"\n"
-"Durch Betätigen der Schaltfläche „Fortgeschritten“ erhalten Sie die\n"
-"Möglichkeit, weitere Sprachen auf Ihrem Rechner zu installieren, um diese\n"
-"später verwenden zu können. Wollen Sie etwa Spaniern muttersprachlichen\n"
-"Zugang zu Ihrem System erlauben, wählen Sie deutsch als Hauptsprache in der\n"
-"Liste und im Fortgeschrittenen-Bereich „Spanish|Spain“.\n"
-"\n"
-"Haben Sie eine Sprache markiert und die Wahl mit „OK“ bestätigt, gelangen\n"
-"Sie automatisch zum nächsten Schritt."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"„DrakX“ versucht normalerweise die Anzahl Tasten Ihrer Maus zu erkennen.\n"
-"Sollte das nicht möglich sein, so behandelt es Ihre Maus als\n"
-"Zwei-Tasten-Maus und emuliert die mittlere Taste. Es erkennt üblicherweise\n"
-"korrekt, ob es sich um eine serielle, eine PS/2- oder um eine USB-Maus\n"
-"handelt.\n"
-"\n"
-"Sollte dies nicht Ihren Vorstellungen entsprechen: Wählen Sie einfach Ihren\n"
-"Maustyp aus der Liste, die Ihnen angezeigt wird.\n"
-"\n"
-"Anschließend können Sie die Funktionstüchtigkeit Ihrer Maus überprüfen.\n"
-"Verwenden Sie auch die Knöpfe und gegebenenfalls das Mausrad, um\n"
-"sicherzustellen, dass die festgelegten Einstellungen funktionieren. Falls\n"
-"nicht, klicken Sie auf „Abbrechen“ und wählen einen anderen Treiber aus."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Bitte wählen Sie den richtigen Anschluss aus. Die COM1-Schnittstelle unter\n"
-"Windows wird beispielsweise unter GNU/Linux als „ttyS0“ bezeichnet."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Sie können nun das »root« Passwort für Ihr Mandrake Linux System eingeben.\n"
-"Das Passwort muss zweimal eingegeben werden, um sicher zu stellen, dass sie\n"
-"es korrekt eingegeben haben.\n"
-"\n"
-"»root« ist das Benutzerkennzeichen des Systemadministrators. Er ist der\n"
-"einzige der berechtigt ist, neue Software zu installieren, Systemdateien zu\n"
-"ändern oder neue Benutzerkennzeichen anzulegen. Kurz gesagt: »root« darf\n"
-"alles! Wählen Sie deshalb das Passwort sehr sorgfältig aus! Unberechtigter\n"
-"Zugang zu diesem Kennzeichen ist extrem gefährlich für die Integrität Ihres\n"
-"Systems und der darauf enthaltenen Daten. Daher müssen Sie auch ein\n"
-"Passwort auswählen, was nicht leicht zu erraten ist; „DrakX“ teilt Ihnen\n"
-"mit, wenn das Passwort zu einfach ist. Sie sehen, dass es auch möglich ist,\n"
-"kein Passwort zu vergeben. Wir raten Ihnen jedoch dringend davon ab!\n"
-"Glauben Sie nicht, dass nur, weil Sie GNU/Linux geladen haben, Ihre anderen\n"
-"Betriebssysteme vor Fehlern sicher sind. »root« hat keine Beschränkungen.\n"
-"Er könnte beispielsweise unbeabsichtigterweise alle Daten auf allen\n"
-"Partitionen löschen, weil er unvorsichtigerweise auf die Partitionen selber\n"
-"zugegriffen hat!\n"
-"\n"
-"Das Passwort sollte eine Mischung aus alphanumerischen Zeichen sein und\n"
-"mindestens 8 Zeichen lang sein. Es sollte niemals irgendwo aufgeschrieben\n"
-"werden.\n"
-"\n"
-"Machen Sie das Passwort aber nicht zu lang oder zu kompliziert: Sie sollten\n"
-"es sich ohne großen Aufwand merken können.\n"
-"\n"
-"Sie müssen das Passwort zweimal eingeben - ein Tippfehler beim ersten\n"
-"Versuch könnte sonst zu einem Problem werden, da Sie anschließend das\n"
-"„falsche“ Passwort bei der Verbindung mit dem System eingeben müssten.\n"
-"\n"
-"Im Expertenmodus werden Ihnen zusätzliche Optionen zur Verfügung gestellt.\n"
-"Diese hängen davon ab, ob Sie mit sich mit einem Authentifizierungsserver\n"
-"verbinden wollen oder nicht.\n"
-"\n"
-"Falls in Ihrem Netzwerk das LDAP (oder NIS) Protokoll für die\n"
-"Authentifizierung verwendet wird, wählen Sie bitte den entsprechenden\n"
-"Menüpunkt. Falls Sie nicht wissen, welches Protokoll Sie verwenden, fragen\n"
-"Sie Ihren Netzwerkadministrator.\n"
-"\n"
-"Falls Ihr Rechner nicht an einem administrierten Netzwerk hängt, wählen Sie\n"
-"bitte „Lokale Dateien“ zur Authentifizierung."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"„LILO“ und „grub“ sind Betriebssystemstarter für GNU/Linux. Diese\n"
-"Installationsphase läuft in den meisten Fällen völlig automatisch ab.\n"
-"„DrakX“ analysiert den Bootsektor und ergreift dann die passenden\n"
-"Maßnahmen:\n"
-"\n"
-" * Findet „DrakX“ einen Windows-Bootsektor, ersetzt es ihn durch einen\n"
-"„grub“ oder „LILO“-Bootsektor. Sie erhalten dadurch die Möglichkeit, beim\n"
-"Systemstart zwischen Windows (bzw. anderen Betriebssystemen, sofern\n"
-"vorhanden) und Windows auszuwählen;\n"
-"\n"
-" * Findet „DrakX“ einen Linux-Bootsektor vor, ersetzt es ihn durch einen\n"
-"neuen;\n"
-"\n"
-"Im Zweifelsfall bietet „DrakX“ Ihnen einen Dialog mit verschiedenen\n"
-"Auswahlmöglichkeiten.\n"
-"\n"
-" * „Zu verwendender Betriebssystemstarter“: Hier erhalten Sie drei\n"
-"Alternativen:\n"
-"\n"
-"    * „Grub“: Falls Sie „grub“ (Textmenü) bevorzugen.\n"
-"\n"
-"    * „LILO mit grafischem Menü“: Falls Sie „LILO“ mit seiner grafischen\n"
-"Oberfläche bevorzugen.\n"
-"\n"
-"    * „LILO mit Textmenü“: Falls Sie „LILO“ mit Textmenü als Ihren "
-"Favoriten\n"
-"ansehen.\n"
-"\n"
-" * „Boot Gerät“: Normalerweise müssen Sie hier nichts ändern („/dev/hda“),\n"
-"Sie könnten jedoch den Starter auch auf der zweiten Platte installieren,\n"
-"(„/dev/hdb“) oder sogar auf einer Diskette („/dev/fd0“).\n"
-"\n"
-" * „Wartezeit vorm Starten des Standard Betriebssystems“: Wenn Sie Ihren\n"
-"Rechner neu starten erhalten Sie im Menü der zur Verfügung stehenden BSe\n"
-"eine gewisse Zeit um auszuwählen, was Sie starten möchten. Sollten Sie\n"
-"während dieser Zeit keine Wahl getroffen haben, wird Ihr Standard-BS\n"
-"gestartet.\n"
-"\n"
-"!! Machen Sie sich klar, dass Sie sich selbst darum kümmern müssen,\n"
-"irgendwie Ihr Mandrake Linux-System zu starten, wenn Sie hier keinen\n"
-"Betriebssystemstarter installieren (durch Auswahl von „Abbruch“). Stellen\n"
-"Sie auch sicher, dass Sie wissen was Sie tun, wenn Sie hier Einstellungen\n"
-"verändern... !!\n"
-"\n"
-"Durch wählen der Schaltfläche „Fortgeschritten“ erhalten Sie etliche\n"
-"Optionen, die dem fortgeschrittenen Anwender vorbehalten bleiben.\n"
-"\n"
-"Mandrake Linux installiert normalerweise seinen eigenen\n"
-"Betriebssystemstarter, der Sie sowohl GNU/Linux, als auch alle anderen\n"
-"installierten Betriebssysteme starten lässt.\n"
-"\n"
-"Sollte sich auf Ihrem Rechner bereits ein anderes Betriebssystem befinden,\n"
-"so wird dieses sofern es erkannt wird automatisch zu dem Startmenü\n"
-"hinzugefügt. Hier können Sie noch einige Feineinstellungen für die\n"
-"bestehenden Optionen vornehmen. Markieren Sie einen bestehenden Eintrag und\n"
-"betätigen Sie die Schaltfläche „Ändern“, um ihn anzupassen oder zu löschen;\n"
-"„Hinzufügen“ erzeugt einen neuen Eintrag und „Fertig“ bringt Sie zum\n"
-"nächsten Installationsschritt."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"„LILO“ (der LInux LOader) und „grub“ sind Betriebssystemstarter: Diese\n"
-"Programme starten entweder GNU/Linux oder die anderen Betriebssysteme, die\n"
-"auf Ihrem Rechner vorhanden sind. Normalerweise erkennen diese Werkzeuge\n"
-"alle existierenden Betriebssysteme korrekt und bieten Sie als\n"
-"Startalternativen an. Ist dies einmal nicht der Fall, können Sie hier\n"
-"manuell helfend eingreifen. Seien Sie jedoch vorsichtig, dass sie die\n"
-"korrekten Parameter eingeben.\n"
-"\n"
-"Eventuell möchten Sie anderen Anwendern nicht die Möglichkeit geben, diese\n"
-"anderen Betriebssysteme zu verwenden, in diesem Fall können Sie den\n"
-"entsprechenden Eintrag einfach löschen. Das hat jedoch zur Folge, dass sie\n"
-"eine Startdiskette benötigen, um diese Betriebssysteme in Zukunft starten\n"
-"zu können."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Sie müssen nun entscheiden, wo die Informationen zum Starten Ihrer\n"
-"GNU/Linux Distribution erstellt werden sollen.\n"
-"\n"
-"Sofern Sie nicht genau wissen, was sie machen sollen, wählen Sie „Erster\n"
-"Sektor der Platte (MBR)“"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Sie können nun ein Drucksystem wählen. Wo andere Betriebssysteme Ihnen nur\n"
-"eins bieten, bietet Mandrake Linux Ihnen drei:\n"
-"\n"
-" * „pdq“ - Es steht für „print, don't queue“ (engl. für „Drucken ohne\n"
-"Warteschlange“). Falls Sie einen Drucker haben, der direkt an Ihrem Rechner\n"
-"hängt und Sie keine Netzwerkdrucker verwenden wollen, ist dies das\n"
-"Drucksystem Ihrer Wahl. Es kann zwar auch mit Netzwerkdruckern umgehen, ist\n"
-"dabei aber extrem langsam. Wählen Sie „pdq“, wenn Sie ein GNU/Linux Neuling\n"
-"sind. Sie können diese Wahl später immer wieder ändern, indem Sie\n"
-"PrinterDrake im Mandrake Kontrollzentrum starten und dort die Schaltfläche\n"
-"„Expertenmodus“ betätigen.\n"
-"\n"
-" * „CUPS“ - Mit dem „Common Unix Printing System“ (engl. für „Allgemeines\n"
-"Unix-Drucksystem“) können Sie ebenso gut um auf Ihrem direkt\n"
-"angeschlossenen Drucker drucken, wie auf einem Drucker, der an einem Server\n"
-"auf der anderen Seite der Welt hängt. Es ist einfach zu bedienen und kann\n"
-"sowohl als Server als auch als Klient für das alte „lpd“-Drucksystem\n"
-"verwendet werden - Es ist somit rückwärtskompatibel. Es ist sehr mächtig,\n"
-"in seiner Grundeinstellung verhält es sich jedoch genau wie „pdq“. Wenn Sie\n"
-"einen „lpd“ Server benötigen, müssen Sie einfach nur den „cups-lpd“ Dämon\n"
-"starten. „CUPS“ bietet grafische Konfigurations- und Druckmenüs.\n"
-"\n"
-" * „LPRng“ - „Line Printer Daemon new generation“ (engl. für\n"
-"„Zeilendrucker-Dämon - Neue Generation“). Dieses System bietet etwa das\n"
-"gleiche, was die beiden vorherigen können, es erlaubt Ihnen jedoch auch auf\n"
-"Drucker in Novell Netzwerken zuzugreifen, da es das IPX Protokoll\n"
-"beherrscht. Falls Sie das benötigen, verwenden Sie LPRng. Andernfalls ist\n"
-"„CUPS“ vorzuziehen, da es benutzerfreundlicher ist und in\n"
-"Nicht-IPX-Netzwerken besser funktioniert."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"„DrakX“ versucht nun alle IDE Festplatten Ihres Systems zu finden. Unter\n"
-"Anderem sucht „DrakX“ auch nach PCISCSI-Karten, die es kennt, um sie\n"
-"automatisch mit dem richtigen Treiber einzubinden.\n"
-"\n"
-"Falls Sie über keinen SCSI Adapter verfügen, es sich um einen ISASCSI\n"
-"Adapter handelt oder um einen PCISCSI Adapter, bei dem „DrakX“ nicht weiß,\n"
-"welcher Treiber funktioniert, werden Sie gebeten, „DrakX“ zu helfen.\n"
-"\n"
-"Ist in Ihrem Rechner kein SCSI Adapter, wählen Sie einfach „Nein“. Sollten\n"
-"Sie Sich für „Ja“ entscheiden, erscheint eine Liste, aus der Sie Ihren\n"
-"Adapter auswählen können.\n"
-"\n"
-"Mussten Sie den Adapter aus der Liste wählen, fragt „DrakX“ Sie, ob Sie dem\n"
-"Modul Optionen übergeben wollen. Sie können „DrakX“ ruhig erlauben, erst\n"
-"einmal selbst zu versuchen, diese herauszufinden. In den meisten Fällen\n"
-"funktioniert das.\n"
-"\n"
-"Falls nicht, müssen Sie die Optionen angeben. Schauen Sie im\n"
-"Installationshandbuch, wie Sie diese Informationen erhalten können: etwa\n"
-"unter Windows (sofern das auf Ihren Rechner installiert ist), aus den\n"
-"Handbüchern, die sie mit dem Adapter erhalten haben oder von den Web-Seiten\n"
-"des Hardware-Anbieters (sofern Sie einen WWW-Zugang haben)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Sie können weitere „Yaboot“ Einträge angeben, etwa für andere\n"
-"Betriebssysteme, alternative Kerne oder ein Rettungssystem.\n"
-"\n"
-"Für ein anderes BS können Sie nur einen Namen und die Start-Partition\n"
-"angeben.\n"
-"\n"
-"Für Linux gibt es einige Parameter:\n"
-"\n"
-" * „Identifikator“: Es handelt sich um den Namen, den Sie an der „Yaboot“\n"
-"Eingabeaufforderung angeben müssen, um diese Alternative zu wählen.\n"
-"\n"
-" * „Kern“: Der Name des BS-Kerns, den sie starten wollen. Normalerweise\n"
-"handelt es sich um „vmlinuz“ oder eine Variante von „vmlinuz“ mit einer\n"
-"Versionsnummer.\n"
-"\n"
-" * „Verzeichnisbaumwurzel“: Die Verzeichnisbaumwurzel „/“ Ihrer Linux\n"
-"Installation.\n"
-"\n"
-" * „Übergeben“: Auf Apple Hardware, wird die Übergabemöglichkeit weiterer\n"
-"Kernparameter häufig verwendet, um die Grafikausgabe richtig zu\n"
-"konfigurieren oder die Tastaturemulation der Mausknöpfe einzuschalten, da\n"
-"klassische Apple-Mäuse von Hause aus mit 2 fehlenden Maustasten\n"
-"ausgeliefert werden. Hier einige Beispiele:\n"
-"\n"
-"   video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"   video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * „Init-RamDisk“: Dieser Parameter kann entweder verwendet werden, um beim\n"
-"Betriebssystemstart bereits zusätzliche Kern-Module zur Verfügung zu haben,\n"
-"ohne dass das Start-Gerät zur Verfügung steht oder um ein RamDisk Abbild\n"
-"für den BS-Start in Notfällen zur Verfügung zu haben.\n"
-"\n"
-" * „Größe der Init-RamDisk“: Standardmäßig ist eine RamDisk 4096 Bytes "
-"groß.\n"
-"Sollten Sie eine größere RamDisk benötigen, können Sie das mit diesem\n"
-"Parameter einstellen.\n"
-"\n"
-" * „Schreiben/Lesen“: Normalerweise wird die Verzeichnisbaumwurzel zuerst "
-"im\n"
-"Nur-Lese-Modus eingehängt, um eine Dateisystem Verifikation durchführen zu\n"
-"können, bevor das Betriebssystem seinen Dienst aufnimmt. Diesen Umstand\n"
-"können Sie hier abstellen.\n"
-"\n"
-" * „NoVideo“: Sollte sich die Apple Grafik-Hardware als extrem "
-"problematisch\n"
-"erweisen, können Sie diesen Parameter verwenden um im sog. „novideo“-Modus,\n"
-"also im FrameBuffer-Modus zu starten.\n"
-"\n"
-" * „Standard“: Wählt diesen Eintrag als Standard Linux-Kern, den Sie durch\n"
-"Drücken von [Enter] an der „Yaboot“ Eingabeaufforderung gestartet bekommen.\n"
-"Wenn Sie die [Tab]-Taste an der Eingabeaufforderung drücken, erhalten Sie\n"
-"eine Liste der verfügbaren Alternativen. Der Standardeintrag wird mit einem\n"
-"Stern „*“ markiert."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"„Yaboot“ ist ein BS-Starter für NewWorld MacIntosh Rechner. Er kann sowohl\n"
-"GNU/Linux als auch MacOS oder MacOS X starten, falls diese auf Ihrem\n"
-"Rechner installiert sind. Normalerweise werden diese Betriebssysteme alle\n"
-"automatisch gefunden und eingebunden. Sollte dies nicht der Fall sein,\n"
-"können Sie diese hier manuell hinzufügen. Stellen Sie jedoch sicher, die\n"
-"richtigen Parameter zu verwenden.\n"
-"\n"
-"Die Hauptparameter von „Yaboot“ sind:\n"
-"\n"
-" * „Init Nachricht“: Ein Text, der vor der Eingabeaufforderung angezeigt\n"
-"wird.\n"
-"\n"
-" * „Boot Gerät“: Hiermit wird angegeben, wohin die Informationen zum "
-"Starten\n"
-"Ihres GNU/Linux Systems geschrieben werden sollen. Sie sollten in einem\n"
-"früheren Schritt bereits eine Boot-Partition angelegt haben, um diese Daten\n"
-"zu beherbergen.\n"
-"\n"
-" * „Open Firmware Verzögerung“: Im Gegensatz zu „LILO“, stehen mit „Yaboot“\n"
-"zwei Verzögerungen zur Verfügung. Die erste Verzögerung wird in Sekunden\n"
-"angegeben und dient zur Auswahl zwischen CD, OF Boot, MacOS oder Linux.\n"
-"\n"
-" * „BS-Startverzögerung für den Kern“: Diese Verzögerung entspricht der\n"
-"„LILO“ Start-Verzögerung. Sie haben nach der Auswahl von GNU/Linux diese\n"
-"Verzögerung (in 0,1 Sekunden Schritten) Zeit, bis der Standardkern geladen\n"
-"wird.\n"
-"\n"
-" * „BS-Start von CD erlauben“: Markieren dieses Punkts erlaubt es Ihnen an\n"
-"der ersten Eingabeaufforderung „C“ für den Start von CD zu wählen.\n"
-"\n"
-" * „Open Firmware Start erlauben“: Markieren dieses Punkts erlaubt es Ihnen\n"
-"an der ersten Eingabeaufforderung „N“ für den Open Firmware Start zu\n"
-"wählen.\n"
-"\n"
-" * „Standard BS“: Hiermit stellen Sie ein, welches Betriebssystem nach\n"
-"Ablauf der Open Firmware Verzögerung automatisch gestartet werden soll."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Hier bekommen Sie verschiedene Parameter Ihres Systems angezeigt. Je nach\n"
-"vorhandener Hardware sehen Sie hier (oder eben nicht) folgende Einträge:\n"
-"\n"
-" * „Maus“: Kontrollieren Sie die konfigurierte Maus und betätigen Sie, "
-"falls\n"
-"notwendig, die Schaltfläche.\n"
-"\n"
-" * „Tastatur“: Kontrollieren Sie die aktuelle Tastaturvorgabe und wählen "
-"Sie\n"
-"die Schaltfläche, falls Sie die Vorgabe ändern wollen.\n"
-"\n"
-" * „Zeitzone“: „DrakX“ versucht die Zeitzone anhand der gewählten Sprache "
-"zu\n"
-"„erraten“. Es ist jedoch möglich, dass Sie sich nicht in dem Land befinden,\n"
-"das die vorgegebene Sprache erahnen lässt. In diesem Fall sollten Sie die\n"
-"Schaltfläche anwählen, um die Uhr entsprechend Ihrer lokalen Zeitzone zu\n"
-"setzen.\n"
-"\n"
-" * „Drucker“: Durch Anwahl der Schaltfläche „Kein Drucker“ starten Sie den\n"
-"Druckerassistenten.\n"
-"\n"
-" * „Soundkarte“: Falls eine Soundkarte in Ihrem Rechner gefunden wurde, "
-"wird\n"
-"sie hier angezeigt. Es ist jedoch keine Änderung während der Installation\n"
-"möglich.\n"
-"\n"
-" * „TV-Karte“: Falls eine TV-Karte in Ihrem Rechner gefunden wurde, wird "
-"sie\n"
-"hier angezeigt. Es ist jedoch keine Änderung während der Installation\n"
-"möglich.\n"
-"\n"
-" * „ISDN Karte“: Falls eine ISDN Karte in Ihrem Rechner gefunden wurde, "
-"wird\n"
-"sie hier angezeigt. Durch Anwahl der Schaltfläche können Sie die Parameter\n"
-"ändern."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Wählen Sie die Festplatte, die sie löschen wollen, um Ihre neue Mandrake\n"
-"Linux Distribution darauf zu installieren. Achtung: Alle darauf\n"
-"befindlichen Daten gehen bei diesem Schritt unwiederbringlich verloren!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Wählen Sie „OK“, wenn Sie alle Partitionen (damit auch alle Daten) dieser\n"
-"Festplatte löschen wollen. Achtung: durch Betätigen dieser Schaltfläche\n"
-"werden alle Daten auf der Festplatte unwiederbringlich gelöscht (auch alle\n"
-"evtl. vorhandenen Windows(TM)-Daten)!\n"
-"\n"
-"Wählen Sie „Abbruch“, um die vorhandenen Daten unangetastet zu lassen und\n"
-"die Operation abzubrechen."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Ich kann die Kernmodule, die zu diesem Kern passen, nicht finden (Datei %s "
-"fehlt). Das bedeutet normalerweise das Ihre Startdiskette nicht mit dem "
-"Installationsmedium übereinstimmt (Bitte erstellen Sie eine neue "
-"Startdiskette). "
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Sie müssen auch %s formatieren."
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Sie haben die folgenden Server ausgewählt: %s\n"
-"\n"
-"\n"
-"Diese Server werden standardmäßig aktiviert. Sie haben keine bekannten\n"
-"Sicherheitsprobleme, es können jedoch irgendwann welche gefunden werden.\n"
-"In diesem Fall müssen Sie sicherstellen, dass Sie so schnell wie möglich\n"
-" eine Paketaktualisierung vornehmen.\n"
-"\n"
-"\n"
-"Wollen Sie diese Server wirklich installieren?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-"Ich kann kein Broadcast machen,\n"
-"da keine NIS Domäne angegeben wurde"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Legen Sie eine leere, FAT formatierte Diskette in Laufwerk %s ein."
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Diese Diskette ist nich FAT formatiert"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Um diese gespeicherte Paketauswahl zu verwenden, starten Sie die \n"
-"Installation bitte mit: „boot defcfg=floppy“"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fehler beim Lesen der Datei %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Einige Hardware Komponenten Ihres Rechners benötigen „proprietäre“\n"
-"Treiber. Weitere Infos hierzu finden Sie unter: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Sie brauchen eine Verzeichnisbaumwurzel.\n"
-"Erzeugen Sie eine Partition (oder klicken Sie auf eine existierende).\n"
-"Wählen Sie „Einhängpunkt“ und setzen Sie ihn auf „/“"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Sie benötigen eine Auslagerungspartition"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Sie haben keine Auslagerungspartition\n"
-"\n"
-"Wollen Sie trotzdem fortfahren?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Sie müssen eine FAT Partition in „/boot/efi“ eingehängt haben."
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Freien Platz verwenden"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nicht genug freier Platz, um die neue Partition anlegen zu können."
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Verwende existierende Partition(en)"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Es gibt keine existierende Partition, die ich verwenden kann."
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Auf der Windows Partition Loopbacks anlegen"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Auf welche Partition wollen Sie Linux4Win installieren?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Wählen Sie die Größen"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Größe der Verzeichnisbaumwurzel-Partition in MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Größe der Auslagerungspartition in MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Den freien Platz der Windows Partition verwenden"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Bei welcher Partition wollen Sie die Größe ändern?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Errechne die Grenzen des Windows Dateisystems"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Das Werkzeug zum Verändern der FAT Partitionsgröße kann mit der \n"
-"Partition nicht arbeiten. Folgender Fehler trat auf:\n"
-"%s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Ihre Windows-Partition ist zu sehr fragmentiert.\n"
-"Starten Sie bitte erst „defrag“ unter Windows."
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"WARNUNG!\n"
-"\n"
-"DrakX wird nun die Größe Ihrer Windows Partition verändern.\n"
-"Seien Sie Vorsichtig: Diese Aktion ist gefährlich. Falls Sie es noch\n"
-"nicht getan haben, sollten Sie nun die Installation abbrechen, um\n"
-"scandisk (sowie möglicherweise defrag) unter Windows auf die Partition \n"
-"anzuwenden. Anschließend können Sie die Installation erneut starten.\n"
-"Sie sollten natürlich generell Sicherheitskopien Ihrer Daten angelegt\n"
-"haben. Falls dies der Fall ist, können Sie mit OK fortfahren."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Wieviel Platz benötigen sie noch für Windows auf"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "Partition %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT Größenanpassung schlug Fehl: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Sie haben keine FAT Partition, deren Größe ich anpassen kann, bzw. die\n"
-"ich als Loopback verwenden kann (möglicherweise haben Sie auch einfach\n"
-"nur nichtmehr genügend freien Speicher)."
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Komplette Platte löschen"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Windows(TM) löschen"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Sie haben mehr als eine Festplatte.\n"
-"Auf welche soll GNU/Linux installiert werden?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"SÄMTLICHE existierende Partitionen samt der derauf befindlichen Daten \n"
-"auf Laufwerk %s gehen dabei verloren"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Benutzerdefinierte Partitionierung"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Fdisk verwenden"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sie können nun %s partitionieren.\n"
-"Vergessen Sie nicht die Einstellungen mittels ,w` zu speichern, \n"
-"sobald Sie fertig sind."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Sie haben nicht genug freien Platz auf Ihrer Windows Partition."
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ich finde nicht genug Platz für die Installation."
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Der DrakX Partitionierungsassistent fand folgende Lösung:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Das Partitionieren schlug Fehl: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Netzwerkverbindung herstellen"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Netzwerkverbindung trennen"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Es trat ein Fehler auf. Ich weiß jedoch nicht, wie ich damit sinnvoll \n"
-"umgehen soll. Sie können fortfahren, jedoch auf eigenes Risiko!"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Den Einhängpunkt %s kopieren"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Einige wichtige Pakete wurden nicht richtig installiert. \n"
-"Entweder ist Ihr CD-ROM-Laufwerk oder Ihre CD-ROM defekt. \n"
-"Testen Sie die CD-ROM auf einem Linux-Rechner mittels „rpm -qpl \n"
-"Mandrake/rpms/*.rpm“\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Willkommen auf %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Kein Disketten-Laufwerk verfügbar"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Beginn von Schritt „%s“\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ihr Rechner hat nicht genug Ressourcen. Vermutlich werden bei der \n"
-"Installation Probleme auftreten. In diesem Fall sollten Sie eine \n"
-"Text-Installation versuchen. Drücken Sie dafür <F1> während dem \n"
-"Installationsstart und geben Sie „text“ an der Eingabeaufforderung \n"
-"ein."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installationsart"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Bitte wählen Sie eine der folgenden Installationsklassen:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Die Gesamtgröße der zu installierenden Pakete beträgt etwa %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Falls Sie weniger als diese Menge installieren wollen, \n"
-"geben Sie (in Prozent) an, wie viele Pakete Sie installieren wollen.\n"
-"\n"
-"Ein geringer Prozentsatz installiert nur die wichtigsten Pakete;\n"
-"100%% installiert alle ausgewählten Pakete."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Sie haben nur Platz für %d%% der ausgewählten Pakete. \n"
-"\n"
-"Falls Sie weniger als diese Menge installieren wollen, \n"
-"geben Sie (in Prozent) an, wie viele Pakete Sie installieren wollen.\n"
-"Ein geringer Prozentsatz installiert nur die wichtigsten Pakete;\n"
-"%d%% installiert so viele Pakete wie möglich."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Im nächsten Schritt können Sie genauer auswählen"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Prozent der zu installierenden Pakete"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Auswahl der Paketgruppen"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Individuelle Paketauswahl"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Gesamtgröße: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Ungültiges Paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Name: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Version: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Größe: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Wichtigkeit: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Sie können dieses Paket nicht auswählen, da Sie nicht genug Plattenplatz "
-"haben."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Die folgenden Pakete werden installiert werden"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Die folgenden Pakete werden entfernt"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Sie können dieses Paket nicht auswählen/es aus der Auswahl entfernen."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dieses Paket ist existenziell, sie können es nicht deselektieren"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-"Sie können dieses Paket nicht aus der Auswahl entfernen. \n"
-"Es ist bereits installiert!"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Dieses Paket muss aktualisiert werden.\n"
-"Sind Sie sicher, dass Sie es aus der Auswahl entfernen wollen?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-"Sie können dieses Paket nicht aus der Auswahl entfernen. \n"
-"Es muss aktualisiert werden!"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Anzeige automatisch markierter Pakete"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installation"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Laden von/Speichern auf Diskette"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Erneuere Paket Auswahl"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimal-Installation"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Zu installierende Pakete auswählen"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Installation wird durchgeführt"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Schätzung"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Verbleibende Zeit "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Bitte warten, bereite Installation vor"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d Pakete"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installation des Pakets %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Akzeptieren"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Zurückweisen"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Bitte wechseln Sie die CD!\n"
-"\n"
-"Bitte legen Sie die CD-ROM „%s“ in Ihr Laufwerk,\n"
-"dann drücken Sie OK.\n"
-"Falls Sie sie nicht vorliegen haben, drücken Sie Abbruch."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Wollen Sie trotzdem fortfahren?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Bei der Anforderung folgender Pakete trat ein Fehler auf:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Bei der Installation der Pakete trat ein Fehler auf:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Achtung\n"
-"\n"
-"Bitte lesen Sie die nachfolgenden Ausführungen sorgfältig. Wenn Sie mit\n"
-"irgendeinem Teil nicht einverstanden sind, dürfen Sie nicht den Inhalt\n"
-"der folgenden CDs installieren. Klicken Sie auf „Zurückweisen“, um die\n"
-"Installation ohne Verwendung dieser CDs fortzusetzen.\n"
-"\n"
-"\n"
-"Einige Komponenten auf den nachfolgenden CDs unterliegen nicht der GPL\n"
-"oder ähnlichen Lizenzabkommen. Jede dieser Komponenten unterliegt dann\n"
-"den Bedingungen ihrer eigenen spezifischen Lizenz.\n"
-"Bitte lesen Sie diese Lizenzen sorgfältig und nur wenn Sie mit ihnen\n"
-"einverstanden sind, dürfen Sie die entsprechenden Produkte entsprechend\n"
-"ihrer Lizenz benutzen und weitergeben.\n"
-"Solche Lizenzen verbieten im allgemeinen das Transferieren, Duplizieren\n"
-"(außer für Sicherheitskopien), Weitergeben, Decompilieren, Disassamblen\n"
-"oder Verändern der Komponente.\n"
-"Jeder Bruch des Lizenzabkommens beendet sofort die Ihnen im Rahmen der\n"
-"Lizenz eingeräumten Rechte. Wenn die jeweilige Lizenz Ihnen nicht\n"
-"entsprechende Rechte einräumt, dürfen Sie die Programme nicht auf mehr\n"
-"als einem System installieren oder zur Benutzung in einem Netzwerk\n"
-"einrichten. Im Zweifelsfall kontaktieren Sie bitte den Vertreiber oder\n"
-"Herausgeber der jeweiligen Komponente.\n"
-"Transfer an Dritte oder Kopieren solcher Komponenten inklusive ihrer\n"
-"Dokumentation ist normalerweise verboten.\n"
-"\n"
-"\n"
-"Alle Rechte an den Komponenten der nachfolgenden CDs liegen bei den\n"
-"jeweiligen Autoren und sind durch die Urheberrechtsgesetze für\n"
-"Softwareprodukte geschützt.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Es ist ein Fehler aufgetreten"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Möchten Sie die Installation wirklich beenden?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lizenz"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Bei dieser Übersetzung handelt es sich um eine inoffizielle Übersetzung\n"
-"der Mandrake Linux-Lizenz in die deutsche Sprache. Sie ist keine\n"
-"rechtsverbindliche Darstellung der Lizenzbedingungen der Software in\n"
-"dieser Distribution - nur der ursprüngliche französische Text der\n"
-"Mandrake Linux Lizenz ist rechtsverbindlich. Wir hoffen aber, dass diese\n"
-"Übersetzung den deutschsprechenden Benutzern das Verständnis dieser\n"
-"Lizenz erleichtert.\n"
-"\n"
-"\n"
-"Einführung\n"
-"\n"
-"Das Betriebssystem und die anderen Komponenten, die in Mandrake Linux\n"
-"enthalten sind, werden hier „Software-Produkte“ genannt. Die\n"
-"Software-Produkte umfassen, aber sind nicht beschränkt auf, die\n"
-"Gesamtheit der Programme, Methoden, Regeln, und Dokumentation, welche\n"
-"zum Betriebssystem und den anderen Komponenten der Mandrake Linux\n"
-"Distribution gehören.\n"
-"\n"
-"\n"
-"1. Lizenzabkommen\n"
-"\n"
-"Bitte lesen Sie dieses Dokument sorgfältig. Dieses Dokument ist ein\n"
-"Lizenzabkommen zwischen Ihnen und MandrakeSoft S. A. welches sich auf\n"
-"die Software-Produkte bezieht.\n"
-"Durch Installation, Duplizierung oder Benutzung der Software-Produkte in\n"
-"irgendeiner Art und Weise erklären Sie sich mit den Bedingungen dieser\n"
-"Lizenz einverstanden.\n"
-"Wenn Sie mit irgendeinem Punkt dieser Lizenz nicht einverstanden sind,\n"
-"ist es Ihnen nicht erlaubt, die Software-Produkte zu installieren,\n"
-"duplizieren oder zu benutzen.\n"
-"Mit jedem Versuch, die Software-Produkte in einer Art und Weise zu\n"
-"benutzen, die nicht den Bedingungen dieser Lizenz entspricht, verlieren\n"
-"Sie die Ihnen mit dieser Lizenz eingeräumten Rechte. In diesem Fall\n"
-"haben Sie unverzüglich alle Kopien der Software-Produkte zu vernichten.\n"
-"\n"
-"\n"
-"2. Eingeschränkte Garantie\n"
-"\n"
-"Die Software-Produkte und die beigefügte Dokumentation werden dem\n"
-"Benutzer lediglich zur Verfügung gestellt, es wird keinerlei Garantie\n"
-"gegeben soweit es gesetzlich zulässig ist.\n"
-"MandrakeSoft S. A. haftet unter keinen Umständen, soweit gesetzlich\n"
-"zulässig, für direkte oder indirekte Schäden irgendwelcher Art,\n"
-"(inklusive uneingeschränkt Schäden aufgrund Verlust von\n"
-"Geschäftsbeziehungen, Unterbrechung von Geschäftsvorgängen,\n"
-"finanziellen Verlust, Gebühren oder Strafen aufgrund gerichtlicher\n"
-"Entscheide, oder jegliche Folgeschäden) die aufgrund der Benutzung oder\n"
-"der Unmöglichkeit der Benutzung der Software-Produkte entstehen, auch\n"
-"wenn MandrakeSoft S. A. über die Möglichkeit und das Auftreten\n"
-"derartiger Schäden unterrichtet wurde.\n"
-"\n"
-"\n"
-"EINGESCHRÄNKTE VERANTWORTLICHKEIT BEZOGEN AUF DEN BESITZ UND DIE\n"
-"BENUTZUNG VON SOFTWARE, DIE IN EINIGEN LÄNDERN VERBOTEN IST.\n"
-"\n"
-"\n"
-"Soweit gesetzlich zulässig, haften MandrakeSoft S. A. und deren\n"
-"Vertreiber unter keinen Umständen für direkte oder indirekte Schäden\n"
-"irgendwelcher Art, (inklusive uneingeschränkt Schäden aufgrund Verlust\n"
-"von Geschäftsbeziehungen, Unterbrechung von Geschäftsvorgängen,\n"
-"finanziellen Verlust, Gebühren oder Strafen aufgrund gerichtlicher\n"
-"Entscheide, oder jegliche Folgeschäden) die aufgrund des Besitzes und\n"
-"der Benutzung von Software-Komponenten oder aufgrund des Ladens von\n"
-"Software-Komponenten von den Internet-Servern von MandrakeSoft S. A.,\n"
-"deren Besitz und Benutzung in einigen Ländern aufgrund lokaler Gesetze\n"
-"nicht gestattet ist, entstehen.\n"
-"Diese Einschränkung der Verantwortlichkeit bezieht sich auch, aber nicht\n"
-"nur, auf die Komponenten für starke Kryptografie enthalten in den\n"
-"Software-Produkten.\n"
-"\n"
-"\n"
-"3. Die GPL und verwandte Lizenzen\n"
-"\n"
-"Die Software-Produkte bestehen aus Komponenten, die von verschiedenen\n"
-"Personen und Einrichtungen erstellt wurden. Die meisten Komponenten\n"
-"unterliegen den Bedingungen der GNU General Public License, im folgenden\n"
-"„GPL“ genannt, oder ähnlichen Lizenzen. Die meisten dieser Lizenzen\n"
-"erlauben es, die Komponenten, die diesen Lizenzen unterliegen, zu\n"
-"benutzen, zu duplizieren, anzupassen, und weiterzugeben. Bitte lesen sie\n"
-"sorgfältig die Bedingungen der Lizenzabkommen von jeder Komponente,\n"
-"bevor Sie sie benutzen. Jegliche Frage zur Lizenz einer Komponente ist an\n"
-"den Autor der Komponente und nicht an MandrakeSoft S. A. zu richten. Die\n"
-"von MandrakeSoft S. A. erstellten Programme unterliegen der GPL.\n"
-"Von MandrakeSoft S. A. geschriebene Dokumentation unterliegt einer\n"
-"spezifischen Lizenz. Bitte lesen Sie die Dokumentation für weitere\n"
-"Details.\n"
-"\n"
-"\n"
-"4. Geistiges Eigentum\n"
-"\n"
-"Alle Rechte an den Komponenten der Software-Produkte liegen bei den\n"
-"entsprechenden Autoren und sind durch die Urheberrechtsgesetze für\n"
-"Softwareprodukte geschützt.\n"
-"MandrakeSoft S. A. behält sich das Recht vor, die Software-Produkte zu\n"
-"modifizieren und anzupassen.\n"
-"„Mandrake“, „Mandrake Linux“ und entsprechende Logos sind eingetragene\n"
-"Warenzeichen der MandrakeSoft S. A..\n"
-"\n"
-"\n"
-"5. Gesetzliche Bestimmungen\n"
-"\n"
-"Wenn irgendein Teil dieses Lizenzabkommens durch einen Gerichtsentscheid\n"
-"für ungültig, illegal oder inakzeptabel erklärt wird, wird dieser Teil\n"
-"aus dem Abkommen ausgeschlossen. Sie bleiben weiterhin an die anderen,\n"
-"anwendbaren Teile gebunden.\n"
-"Die Bedingungen dieses Lizenzabkommens unterliegen den Gesetzen von\n"
-"Frankreich. Alle Unstimmigkeiten bezüglich der Bedingungen dieser Lizenz\n"
-"werden vorzugsweise außergerichtlich beigelegt. Letztes Mittel ist das\n"
-"zuständige Gericht in Paris, Frankreich.\n"
-"Zu jeglicher Frage zu diesem Dokument kontaktieren Sie bitte\n"
-"MandrakeSoft S. A..\n"
-"Introduction\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"Hier die französche Version:\n"
-"\n"
-"Le système d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux sont ci-après dénommés ensemble les \n"
-"« Logiciels ». Les Logiciels comprennent notamment, mais de façon non \n"
-"limitative, l'ensemble des programmes, procédés, règles et documentations \n"
-"relatifs au système d'exploitation et aux divers composants de la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licence\n"
-"\n"
-"Veuillez lire attentivement le présent document. Ce document constitue \n"
-"un contrat de licence entre vous (personne physique ou personne morale) et \n"
-"MandrakeSoft S.A. portant sur les Logiciels.\n"
-"Le fait d'installer, de reproduire ou d'utiliser les Logiciels de quelque \n"
-"manière que ce soit indique que vous reconnaissez avoir préalablement eu \n"
-"connaissance et que vous acceptez de vous conformer aux termes et "
-"conditions \n"
-"du présent contrat de licence. En cas de désaccord avec le présent "
-"document \n"
-"vous n'êtes pas autorisé à installer, reproduire et utiliser de quelque \n"
-"manière que ce soit ce produit.\n"
-"Le contrat de licence sera résilié automatiquement et sans préavis dans le \n"
-"cas où vous ne vous conformeriez pas aux dispositions du présent document. \n"
-"En cas de résiliation vous devrez immédiatement détruire tout exemplaire "
-"et \n"
-"toute copie de tous programmes et de toutes documentations qui constituent \n"
-"le système d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"2. Garantie et limitations de garantie\n"
-"\n"
-"Les Logiciels et la documentation qui les accompagne sont fournis en "
-"l'état \n"
-"et sans aucune garantie. MandrakeSoft S.A. décline toute responsabilité \n"
-"découlant d'un dommage direct, spécial, indirect ou accessoire, de quelque \n"
-"nature que ce soit, en relation avec l'utilisation des Logiciels, "
-"notamment \n"
-"et de façon non limitative, tout dommage entraîné par les pertes de \n"
-"bénéfices, interruptions d'activité, pertes d'informations commerciales ou \n"
-"autres pertes pécuniaires, ainsi que des éventuelles condamnations et \n"
-"indemnités devant être versées par suite d'une décision de justice, et ce \n"
-"même si MandrakeSoft S.A. a été informée de la survenue ou de \n"
-"l'éventualité de tels dommages.\n"
-"\n"
-"AVERTISSEMENT QUANT A LA DETENTION OU L'UTILISATION DE LOGICIELS \n"
-"PROHIBES DANS CERTAINS PAYS \n"
-"\n"
-"En aucun cas, ni MandrakeSoft S.A. ni ses fournisseurs ne pourront être \n"
-"tenus responsable à raison d'un préjudice spécial, direct, indirect ou \n"
-"accessoire, de quelque nature que ce soit (notamment et de façon non \n"
-"limitative les pertes de bénéfices, interruptions d'activité, pertes \n"
-"d'informations commerciales ou autres pertes pécuniaires, ainsi que \n"
-"des éventuelles condamnations et indemnités devant être versées par suite \n"
-"d'une décision de justice) qui ferait suite à l'utilisation, la détention \n"
-"ou au simple téléchargement depuis l'un des sites de téléchargement de \n"
-"Mandrake Linux de logiciels prohibés par la législation à laquelle vous \n"
-"êtes soumis. Cet avertissement concerne notamment certains logiciels de \n"
-"cryptographie fournis avec les Logiciels.\n"
-"\n"
-"\n"
-"3. Licence GPL et autres licences\n"
-"\n"
-"Les Logiciels sont constitués de modules logiciels créés par diverses \n"
-"personnes (physiques ou morales). Nombre d'entre eux sont distribués sous \n"
-"les termes de la GNU General Public Licence (ci-après dénommée « GPL ») ou \n"
-"d'autres licences similaires. La plupart de ces licences vous permettent \n"
-"de copier, d'adapter ou de redistribuer les modules logiciels qu'elles \n"
-"régissent. Veuillez lire et agréer les termes et conditions des licences \n"
-"accompagnant chacun d'entre eux avant de les utiliser. Toute question \n"
-"concernant la licence de chaque Logiciel est à soumettre à l'auteur (ou \n"
-"ses représentants) du Logiciel et non à MandrakeSoft. \n"
-"Les programmes conçus par MandrakeSoft sont régis par la licence GPL. \n"
-"La documentation rédigée par MandrakeSoft fait l'objet d'une licence \n"
-"spécifique. Veuillez vous référez à la documentation pour obtenir plus \n"
-"de précisions.\n"
-"\n"
-"\n"
-"4. Propriété intellectuelle\n"
-"\n"
-"Tous les droits, titres et intérêts des différents Logiciels sont la \n"
-"propriété exclusive de leurs auteurs respectifs et sont protégés au titre \n"
-"des droits de propriété intellectuelle et autres lois régissant le droit \n"
-"des Logiciels. Les marques « Mandrake » et « Mandrake Linux » ainsi que "
-"les \n"
-"logotypes associés sont déposés par MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Dispositions diverses\n"
-"\n"
-"Si une disposition de ce contrat de licence devait être déclarée nulle, \n"
-"illégale ou inapplicable par un tribunal compétent, cette disposition sera \n"
-"exclue du présent contrat. Vous continuerez à être liés aux autres \n"
-"dispositions, qui recevront leurs pleins effets. Le contrat de licence \n"
-"est soumis à la Loi française. Toute contestation relative aux présentes \n"
-"sera réglée préalablement par voie amiable. A défaut d'accord avec \n"
-"MandrakeSoft S.A., les tribunaux compétents de Paris seront saisis du \n"
-"litige. Pour toute question relative au présent document, veuillez \n"
-"contacter MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatur"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Bitte wählen Sie Ihren Tastaturtyp."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Hier die Liste aller Tastaturen"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Welche Installationsart wollen Sie durchführen?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installation/Aktualisierung"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Handelt es sich um eine Installation oder eine Aktualisierung?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Empfehlenswert"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Experte"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Aktualisierung"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Nur Pakete aktualisieren"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Bitte wählen Sie Ihren Maustyp."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Maus Port"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Bitte wählen Sie den seriellen Anschluss, an dem Ihre Maus hängt."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Tastenemulation"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulation der 2. Taste"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulation der 3. Taste"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA Karten konfigurieren ..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE konfigurieren"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "Keine Partition verfügbar"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Durchsuchen der Partitionen, um die Einhängpunkte zu finden."
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Wählen Sie die Einhängpunkte"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Vermutlich ist Ihre Partitionstabelle fehlerhaft, ich habe Probleme,\n"
-"sie zu lesen :-(  (Folgender Fehler trat auf: „%s“).\n"
-"Ich kann fortfahren, indem ich die fehlerhaften Partitionen lösche \n"
-"(dabei gehen ALLE darauf vorhandenen DATEN VERLOREN!). Alternativ können \n"
-"Sie mir jedoch auch verbieten, die Partitionstabelle zu verändern.\n"
-"\n"
-"Sind Sie einverstanden, dass ich die problematischen Partitionen lösche?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ist nicht in der Lage, Ihre Partitionstabelle korrekt zu \n"
-"interpretieren. Sie können fortfahren, jedoch auf eigenes Risiko!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Sie haben keinen Platz für die 1 MB große Start-Partition vorgesehen! Die "
-"Installation wird fortgesetzt, Sie müssen jedoch eine Start-Partition mit "
-"DiskDrake erstellen."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-"Es wurde keine Verzeichnisbaumwurzel gefunden, die aktualisiert werden kann."
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Verzeichnisbaumwurzel"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Welche Partition ist Ihre Verzeichnisbaumwurzel?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Sie müssen Ihren Rechner neu starten, um die Änderungen \n"
-"der Partitionstabelle wirksam werden zu lassen."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Zu formatierende Partitionen auswählen"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Soll ich nach defekten Blöcken suchen?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Partitionen formatieren"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Erzeugen und formatieren der Datei %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Der Swap-Bereich ist zu klein, um die Installation zu ermöglichen! \n"
-"Bitte vergrößern Sie den Bereich."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Suche nach vorhandenen Paketen"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Finden der zu aktualisierenden Pakete"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Es steht auf Ihrem System nicht genügend Speicherplatz für die \n"
-"Installation bzw. Aktualisierung zur Verfügung (%d > %d)."
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Komplett (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimal (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Empfohlen (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Bitte wählen Sie, ob die Paketauswahl von Diskette geladen \n"
-"oder darauf gespeichert werden soll. Es handelt sich um das \n"
-"selbe Format, wie die unter „auto_install“ erzeugten Disketten."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Von Diskette laden"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Laden von Diskette ..."
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Auswahl der Pakete"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr ""
-"Legen Sie eine Diskette ein, auf der Ihre Paketauswahl gespeichert ist."
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Auf Diskette speichern"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Gewünschte Größe übersteigt den verfügbaren Platz"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Installationsklasse"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Sie haben keine Paketgruppe ausgewählt\n"
-"Bitte wählen Sie die minimale Installation, die Sie wünschen."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Mit X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Mit minimaler Dokumentation (Empfohlen)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Extrem minimale Installation (ohne „urpmi“)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Falls Sie alle aufgeführten CDs haben, wählen Sie „OK“, \n"
-"falls Sie keine der aufgeführten CDs haben, wählen Sie „Abbruch“,\n"
-"falls nur einige der aufgeführten CDs fehlen, entfernen Sie die \n"
-"entsprechende Markierung und wählen Sie dann „OK“."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM „%s“"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Installation vorbereiten"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installiere Paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Einstellungen für nach der Installation"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Bitte legen Sie die Startdiskette in Laufwerk %s ein."
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr ""
-"Bitte legen Sie die Diskette der zu aktualisiernden Module in Laufwerk %s "
-"ein."
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Sie haben nun die Möglichkeit Software mit starker Verschlüsselung aus dem \n"
-"Internet zu laden.\n"
-"\n"
-"WARNUNG:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall MandrakeSoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"Bitte wenden Sie sich für alle weiteren Fragen bzgl. dieser Übereinkunft "
-"an: \n"
-"MandrakeSoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Sie haben nun die Möglichkeit Pakete zu installieren, die nach Erscheinen\n"
-"der Distribution aktualisiert wurden. Es handelt sich um \n"
-"Sicherheitsaktualisierungen und Fehlerkorrekturen.\n"
-"\n"
-"Allerdings benötigen Sie dafür eine funktionierende Internertverbindung.\n"
-"\n"
-"Möchten Sie die Aktualisierungen vornehmen?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Verbindung mit dem Mandrake Linux Web-Server aufbauen, um eine Liste\n"
-"verfügbarer Pakete zu erhalten."
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Bitte wählen Sie einen Mirror, von dem Sie die Pakete holen wollen."
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Verbindung mit dem Mirror aufbauen, um eine Liste verfügbarer Pakete zu "
-"erhalten."
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Wählen Sie Ihre Zeitzone"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardware Uhr liefert GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatische Zeit-Synchronisation (durch NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "CUPS-Server auf der Gegenseite"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Kein Drucker"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Verfügen Sie über eine ISA soundkarte?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Starten Sie „sndconfig“ nach der Installation, um Ihre Soundkarte "
-"einzurichten."
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Es wurde keine Soundkarte gefunden. Versuchen Sie „harddrake“nach der "
-"Installation."
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Zusammenfassung"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Maus"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Zeitzone"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Drucker"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN Karte"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Soundkarte"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-Karte"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokale Dateien"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Root-Passwort setzen"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Kein Passwort"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Authentifizierung"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP Authentifizierung"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS Authentifizierung"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS Domain"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Mit einer individuellen Startdiskette können Sie Ihr LINUX-System starten, \n"
-"ohne auf einen Betriebssystemstarter angewiesen zu sein. Dies ist "
-"nützlich, \n"
-"wenn Sie SILO nicht auf Ihrem System installieren möchten, wenn ein \n"
-"anderes Betriebssystem SILO entfernt hat oder Ihre Hardware-Konfiguration \n"
-"die Verwendung eines BS-Starters nicht korrekt verarbeitet. \n"
-"Eine individuelle Startdiskette kann auch in Verbindung mit der \n"
-"Mandrake Linux Rettungsdiskette verwendet werden, wodurch das System \n"
-"nach schwerwiegenden Fehlern viel einfacher wiederhergestellt werden \n"
-"kann.\n"
-"\n"
-"Falls Sie eine Startdiskette erstellen wollen, legen Sie eine Diskette \n"
-"ohne relevante Daten in ihr erstes Laufwerk und drücken Sie „OK“."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "erste Disketten-Laufwerk"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "zweite Disketten-Laufwerk"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Überspringen"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Mit einer individuellen Startdiskette können Sie Ihr LINUX-System starten, \n"
-"ohne auf den normalen Betriebssystemstarter angewiesen zu sein. Dies ist "
-"nützlich, wenn \n"
-"Sie weder LILO noch Grub auf Ihrem System installieren möchten, wenn ein \n"
-"anderes Betriebssystem Ihren Betriebssystemstarter entfernt hat oder Ihre "
-"Hardware-Konfiguration die Verwendung eines Betriebssystemstarters nicht "
-"korrekt \n"
-"verarbeitet. Eine individuelle Startdiskette kann auch mit der Linux \n"
-"Mandrake Rettungsdiskette verwendet werden, wodurch das System nach \n"
-"schwerwiegenden Fehlern viel einfacher wiederhergestellt werden kann.\n"
-"\n"
-"Möchten Sie jetzt eine Startdiskette für Ihr System erstellen?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(WARNUNG! Sie verwenden XFS für Ihre Verzeichnisbaumwurzel.\n"
-"Das Erstellen einer Startdiskette auf einem 1,44 MB Medium \n"
-"schlä sicher fehl, da XFS einen sehr großen Treiber benötigt)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Ich kann kein Laufwerk finden"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Wählen Sie das Laufwerk, in dem Sie die Start-Diskette erstellen wollen"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr ""
-"Legen Sie eine Diskette, die keine relevanten Daten mehr enthällt in das %s "
-"ein."
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Startdiskette wird erstellt..."
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Betriebssystemstarter vorbereiten"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Sie scheinen einen „OldWorld“ oder unbekannten\n"
-"Rechner zu verwenden. Der Betriebssystemstarter\n"
-"„yaboot“ wird daher leider nicht funktionieren.\n"
-"Die Installation wird fortgesetzt, sie werden jedoch \n"
-"„BootX“ verwenden müssen um LINUX auf Ihrem Rechner\n"
-"zu starten."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Möchten Sie „aboot“ verwenden?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fehler bei der Installation von aboot. Soll ich die Installation \n"
-"mit Gewalt versuchen, auch wenn dies die Zerstörung der ersten \n"
-"Partition verursachen kann?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "BS-Starter installieren"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Die Installation des BS-Starters schlug Fehl. Folgender Fehler trat auf:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Sie müssen Ihr Open Firmware Startgerät anpassen, dass es den \n"
-"BS-Starter erkennt. Falls Sie beim Neustart nicht die \n"
-"Eingabeaufforderung des BS-Starters sehen, drücken Sie \n"
-"Strg-Option-O-F und geben Sie folgendes ein:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-"Tippen Sie dann: shut-down\n"
-"Beim darauffolgenden Neustart sollte Sie die Eingabeaufforderung sehen."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Legen Sie eine leere Diskette in das %s ein."
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Erstellen einer Auto-Installationsdiskette"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Einige Schritte sind noch nicht komplett.\n"
-"\n"
-"Wollen Sie DrakX wirklich beenden?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Herzlichen Glückwunsch, die Installation ist abgeschlossen.\n"
-"Entfernen Sie die Startmedien (CD-ROMs / Disketten) und drücken Sie die "
-"Eingabetaste zum Neustart Ihres Rechners.\n"
-"\n"
-"Für Informationen zu Sicherheitsaktualisierungen dieser Version von Mandrake "
-"Linux informieren Sie sich bitte unter \n"
-"\n"
-"http://www.mandrakelinux.com/en/82errata.php3\n"
-"\n"
-"Wie Sie Ihr System warten können, erfahren Sie im Kapitel „Nach der "
-"Installation“ im offiziellen Benutzerhandbuch von Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Erstellen einer Auto-Installationsdiskette"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Die automatische Installation kann, falls Sie wollen,\n"
-"vollautomatisch erfolgen. In diesem Fall wird die\n"
-"Festplatte vollständig durch DrakX rekonfiguriert\n"
-"(diese Möglichkeit ist für die Replikation auf anderen\n"
-"Rechnern gedacht).\n"
-"\n"
-"Vermutlich werden Sie es vorziehen, erneut eine normale\n"
-"Installation durchzuführen.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatisiert"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Erneut abspielen"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Paketauswahl speichern"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installation %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"   <Tab>/<Alt-Tab> nächstes Element | <Leertaste> auswählen | <F12> weiter "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "Ich kann „kdesu“ nicht finden!"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "Das Programm „consolehelper“ wurde nicht gefunden."
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Wählen Sie eine Datei"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Fortgeschritten"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Einfach"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Bitte warten"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Baum erweitern"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Baum verkleinern"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Umschalten zwischen unsortiert und gruppiert"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Schlechte Wahl, bitte versuchen Sie es noch einmal\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ihre Wahl? (Standard ‚%s‘) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Angaben, die Sie machen müssen:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ihre Wahl? (0/1, Standard ‚%s‘) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Schaltfläche „%s“: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Möchten Sie diese Schaltfläche betätigen?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ihre Wahl? (Standard „%s“ %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Es gibt zahlreiche Auswahlmöglichkeiten (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Bitte wählen Sie die Nummer aus dem Bereich, die Sie bearbeiten wollen,\n"
-"oder betägen Sie die Eingabetaste um fort zu fahren.Ihre Wahl? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Anmerkung: Ein Eintrag wurde geändert:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Erneut verschicken"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tschechien (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Deutschland"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spanien"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finnland"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Frankreich"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norwegen"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polen"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russland"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Schweden"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Grßbritannien"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Vereinigte Staaten von Amerika"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanien"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenien (alt)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenien (Schreibmaschine)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenien (Phonetisch)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Aserbeidschan (Lateinisches Layout)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgien"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgarien (Phonetisch)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarien (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilien (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Weißrussland"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Schweiz (deutsches Layout)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Schweiz (französisches Layout)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tschechien (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Deutschland (ohne Tod-Tasten)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dänemark"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (USA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegen)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Schweden)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estland"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgien (Kyrillisches Layout)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgien (Lateinisches Layout)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Griechenland"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungarn"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroatien"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israel"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israel (Phonetisch)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iran"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Island"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italien"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japan (106 Tasten)"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korea"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Lateinamerika"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litauen (AZERTY - alt)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litauen (AZERTY - neu)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauen (QWERTY - „number row“)"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauen (QWERTY - Phonetisch)"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Lettland"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Mazedonien"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Niederlande"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polen (QWERTY Layout)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polen (QWERTZ Layout)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugal"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumänien (QWERTZ)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumänien (QWERTY)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russland (YaWERTY)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slowenien"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slowakei (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slowakei (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbien (Kyrillisches Layout)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Indien (Tamilisches Layout)"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thailändische Tastatur"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tadschikistan"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Türkei (traditionelles „F“ Modell)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Türkei (modernes „Q“ Modell)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukraine"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Vereinigte Staaten von Amerika (international)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnam QWERTY („number row“)"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslawien (Lateinisches Layout)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "AltGr-Taste"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Beide Umschalttasten gleichzeitig"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Strg und Umschalttaste gleichzeititg"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock Taste"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Strg und Alt gleichzeitig"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt und Umschalttaste gleichzeitig"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Menütaste"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Linke „Windows“-Taste"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Rechte „Windows“-Taste"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Schleife bei den Einhängpunkten %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Entfernen Sie erst die Logischen Medien\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Die PCMCIA-Unterstützung für 2.2er Kerne wurde eingestellt. Verwenden Sie "
-"bitte einen 2.4er Kern."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Maus"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MausMan/FirstMaus (Seriell)"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generische PS2 Rad-Maus"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Maus"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMaus"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 Taste"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generische 2 Tasten Maus"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generisch"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rad"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "Seriell"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generische 3 Tasten Maus"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMaus"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MausMan/FirstMaus"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Serie"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MausMan+/FirstMaus+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Serie"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Maus (Seriell, alter C7 Typ)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "Bus-Maus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 Tasten"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 Tasten"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "keine"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Keine Maus"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Bitte testen Sie Ihre Maus"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Um Ihre Maus zu aktivieren:"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEGEN SIE IHR MAUS-RAD!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Beenden"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Weiter ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Zurück"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Ist dies richtig?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Internetverbindung"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Der gebräuchlichste Weg mit ADSL eine Verbindung aufzubauen ist pppoe.\n"
-"Einige Verbindungen benutzen jedoch pptp, andere dhcp.\n"
-"Wenn Sie nicht wissen was Sie brauchen, wählen Sie „pppoe verwenden“"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "DHCP verwenden"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "PPPOE verwenden"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "PPTP verwenden"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Welchen DHCP Klienten wollen Sie verwenden?\n"
-"Voreingestellt ist „dhcpcd“"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ich habe keine Ethernet-Netzwerkkarte finden können, daher kanndieser "
-"Verbindungstyp nicht konfiguriert werden."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Wählen Sie die Netzwerkkarte"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Bitte wählen Sie, über welches Netzwerkgerät Sie die \n"
-"Internetverbindung herstellen wollen."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Keine Netzwerkkarte gefunden"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Netzwerk konfigurieren"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Bitte geben Sie ihren Rechnernamen an.\n"
-"Einige DHCP-Server benötigen ihn, um korrekt zu arbeiten.\n"
-"Ihr Rechnername sollte auch die Domain beinhalten,\n"
-"etwa „meinrechner.meineabteilung.meinefirma.de“."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Rechnername"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Netzwerk Konfigurationsassistent"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Externes ISDN Modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interne ISDN Karte"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Um welchen Typ ISDN-Verbindung handelt es sich?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Welche ISDN Konfiguration wollen Sie durchführen?\n"
-"\n"
-"* Die alte Konfiguration verwendet „isdn4net“. Sie \n"
-"  enthällt mächtigere Werkzeuge, ist jedoch komplizierter \n"
-"  einzurichten und nicht voll standardkonform.\n"
-"\n"
-"* Die neue Konfiguration mit „isdn-light“ ist \n"
-"  verständlicher und standardkonformer, sie enthällt \n"
-"  jedoch weniger Werkzeuge.\n"
-"\n"
-"Wir empfehlen die „isdn-light“ Variante.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Neue Konfiguration (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Alte Konfiguration (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN Konfiguration"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Wählen Sie Ihren Netzanbieter.\n"
-"Sollte er nicht aufgeführt sein, wählen Sie „Nicht aufgeführt“"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europäisches Protokoll"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europäisches Protokoll (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokoll für den Rest der Welt"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokoll für den Rest der Welt \n"
-"ohne D-Kanal (Leased Lines)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Welches Protokoll wollen Sie verwenden?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Welchen Kartentyp verwenden Sie?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Keine Ahnung"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA/PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Falls Sie eine ISA-Karte besitzen, sollten die Einstellungen auf dem "
-"nächsten Schirm korrekt sein.\n"
-"\n"
-"Falls Sie eine PCMCIA-Karte besitzen, müssen Sie IRQ und E/A-Bereich Ihrer "
-"Karte kennen.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abbruch"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Fortfahren"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Bitte wählen Sie Ihre ISDN Karte"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ich habe eine PCI ISDN-Karte gefunden, \n"
-"kenne sie jedoch nicht. Bitte helfen Sie mir,\n"
-"indem Sie im nächsten Menü eine auswählen."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Ich konnte keine PCI ISDN-Karte finden.\n"
-"Bitte wählen Sie im nächsten Menü eine aus."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Bitte wählen Sie den seriellen Anschluss, an dem Ihr Modem hängt."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Einwahl Parameter"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Name der Verbindung"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonnummer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skript-basiert"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal-basiert"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Name der Domäne"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Erster DNS Server (optional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Zweiter DNS Server (optional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Sie können die Verbindung trennen oder sie neu konfigurieren."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Sie können Ihre Internetverbindung neu konfigurieren"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Sie sind momentan mit dem Internet verbunden."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Sie können eine Internetverbindung aufbauen oder die Verbindung neu "
-"konfigurieren"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Sie sind momentan nicht mit dem Internet verbunden."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Verbinden"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Verbindung trennen"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Die Verbindung konfigurieren"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internetverbindung und -einrichtung"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Wir werden nun die Verbindung „%s“ konfigurieren."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Wir werden nun die Verbindung „%s“ konfigurieren.\n"
-"\n"
-"\n"
-"Wählen Sie „OK“, um fortzufahren."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Netzwerk konfigurieren"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Da Sie eine Netzwerkinstallation durchführen, ist Ihr Netzwerk bereits\n"
-"konfiguriert. Wählen Sie „OK“, um diese Einstellung beizubehalten oder\n"
-"„Abbruch“, um Ihre Internet- und Netzwerk-Konfiguration neu zu\n"
-"konfigurieren.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Willkommen zum Netzwerk Konfigurationsassistent.\n"
-"\n"
-"Ich versuche nun Ihre Internet-/Netzwerk-Verbindung zu konfigurieren.\n"
-"Falls Sie keine Autodetektion wünschen, entfernen Sie bitte die Markierung.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Wählen Sie das Profil, dass eingestellt werden soll"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Autoerkennung benutzen"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Geräteerkennung..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normale Modem Verbindung"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "an Prot %s gefunden"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN Verbindung"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s gefunden"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL Verbindung"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "an Schnittstelle %s gefunden"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabel Verbindung"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Kabel Verbindung gefunden"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN Verbindung"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "Netzwerkkarte(n) gefunden"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Wählen Sie die Verbindung, die Sie konfigurieren wollen"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Sie haben verschiedene Varianten eingerichtet, sich mit dem\n"
-"Internet zu verbinden. Bitte wählen Sie, welche Verbindungsart\n"
-"ich versuchen soll.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet-Verbindung"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Möchten Sie die Verbindung bei Betriebssystemstart herstellen?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Netzwerk Konfiguration"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Das Netzwerk muss neu gestartet werden"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Beim Neustart des Netzwerks trat ein Fehler auf: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Herzlichen Glückwunsch, die Netzwerk-/Internet-Einrichtung ist beendet.\n"
-"\n"
-"Die Konfiguration wird nun in Ihr System integriert.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Es ist sehr empfehlenswert, im Anschluss Ihre X-Oberfläche\n"
-"neu zu starten, um Probleme, die durch die Änderung des\n"
-"Rechnernamens hervorgerufen werden, zu vermeiden."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Während der Konfiguration traten Fehler auf.\n"
-"Kontrollieren Sie Ihre Verbindung mit „net_monitor“ oder dem Mandrake "
-"Kontrollzentrum. Falls die Verbindung nicht funktioniert, sollten Sie erneut "
-"die Konfguration starten."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"WARNUNG: Dieses Gerät wurde bereits zum Herstellen einer Internetverbindung "
-"konfiguriert.\n"
-"Drücken Sie einfach „OK“, um die Einstellungen zu behalten.\n"
-"Fall Sie Felder verändern, wird die Konfiguration überschrieben."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Bitte geben Sie die IP Parameter dieser Maschine ein.\n"
-"Jeder Eintrag muss als dezimale IP-Adresse in Punktschreibweise \n"
-"angegeben werden (etwa  „192.168.1.42“)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurieren der Netzwerkkarte %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (Treiber %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP Adresse"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netzmaske"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(BOOTP/DHCP)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatische IP-Adressen Zuweisung"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Die IP Adresse sollte etwa die Form „192.168.1.42“ haben!"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Bitte geben Sie ihren Rechnernamen an.\n"
-"Ihr Rechnername sollte auch die Domain beinhalten,\n"
-"etwa „meinrechner.meineabteilung.meinefirma.de“.\n"
-"Falls Sie ein Gateway verwenden, sollten Sie auch dessen IP-Adresse angeben."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS-Server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (etwa %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway Gerät"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxies einstellen"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP Proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP Proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Netzwerkkarten-ID überwachen (sinnvoll für Laptops)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy muss „http://...“ sein"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy muss „ftp://...“ sein"
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet Konfiguration"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Möchten Sie jetzt versuchen eine Internetverbindung aufzubauen?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Ich teste gerade Ihre Verbindung..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sie sind jetzt mit dem Internet verbunden."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Aus Sicherheitsgründen wird die Verbindung nun unterbrochen."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Sie sind momentan nicht mit dem Internet verbunden.\n"
-"Versuchen Sie Ihre Internetverbindung wieder zu konfigurieren."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Verbindungskonfiguration"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-"Bitte füllen Sie die folgen Felder aus \n"
-"bzw. makieren Sie die korrekten Angaben"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Karten IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Karten Mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Karten E/A"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Karten IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Karten IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Ihre eigene Telefonnummer"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Name des Providers (z.B. provider.net) "
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefonnummer des Providers"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Erster DNS des Providers (optional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Zweiter DNS des Providers (optional)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Land auswählen"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Wahlmodus"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Verbindungsgeschwindigkeit"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "VerbindungsTimeout (in Sec)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Kennzeichen (Login)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Passwort"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "Fehler beim Einhängen: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Diese Rechnerarchitektur kennt keine erweiterten Partitionen"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Sie haben einen unbenutzten Bereich in Ihrer Partitionstabelle, \n"
-"den ich nicht ansprechen kann. Die einzige Lösung ist, dass Sie \n"
-"Ihre primären Partitionen so verschieben, dass der Bereich direkt \n"
-"neben der erweiterten Partition zu liegen kommt."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restaurieren aus der Datei %s schlug Fehl: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Fehlerhafte Backup-Datei"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fehler beim Schreiben in Datei %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Mit Ihrer Platte stimmt etwas nicht!\n"
-"Der vorgenommene Integritätstest schlug Fehl.\n"
-"Das bedeutet, dass jeder Schreibvorgang auf der Platte zu einem \n"
-"unvorhersagbaren Ergebnis führen wird."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "unbedingt notwendig"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "wichtig"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "sehr angenehm"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "angenehm"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "eventuell"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokaler Drucker"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Entfernter Drucker"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Drucker an CUPS-Server auf der Gegenseite"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Drucker an lpd-Server auf der Gegenseite"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Netzwerkdrucker (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Drucker an SMB/Windows 9x/ME/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Drucker an NetWare Server"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Druckeranschluss URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Den Auftrag an ein Kommando weiterleiten"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Unbekanntes Modell"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokale Drucker"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Entfernte Drucker"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " an Parallelport \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB-Drucker \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", Multifunktionsgerät am Parallelport \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", USB Multifunktionsgerät"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", Multifunktionsgerät am HP JedDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", Multifunktionsgerät"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", drucken auf %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "auf LDP-Server „%s“, Drucker „%s“"
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP Drucker „%s“, Port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "auf Windows-Server „%s“, Freigabe „%s“"
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "auf dem Novell-Server „%s“, Drucker „%s“"
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", mittels Kommando „%s“"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Rohdaten-Drucker (kein Treiber)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(an %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(an diesem Rechner)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Auf CUPS-Server „%s“"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Standard)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Wählen Sie die Drucker-Anbindung"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Wie ist der Drucker mit Ihrem Rechner verbunden?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Falls auf der Gegenseite ein CUPS-Server läuft, müssen Sie\n"
-"hier keine Einstellungen vornehmen, die Drucker werden \n"
-"automatisch erkannt und übernommen."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS Konfiguration"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "CUPS-Server angeben"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Falls auf der Gegenseite ein CUPS-Server läuft, müssen Sie\n"
-"hier keine Einstellungen vornehmen; CUPS Server informieren Ihren\n"
-"Rechner über die von ihnen verwalteten Drucker. Alle Drucker,\n"
-"die Ihr Rechner momentan kennt sind unter „Entfernte Drucker“ aufgeführt.\n"
-"Sollte der entfernte CUPS Server jedoch in einem anderen Subnetz\n"
-"beheimatet sein, müssen Sie mindestens seine IP-Adresse, evtl. auch\n"
-"die Port Nummer angeben. Im lokalen Subnetz können Sie die Felder\n"
-"frei lassen."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalerweise wird CUPS automatisch entsprechend Ihres Netzwerks\n"
-"eingerichtet, damit Sie alle Drucker im lokalen Netzwerk verwenden\n"
-"können. Falls das nicht funktioniert, schalten Sie „Automatische\n"
-"CUPS Konfiguration“ aus und editieren Sie die Datei\n"
-"„/etc/cups/cupsd.conf“ selbst. Vergessen Sie nicht, CUPS anschließend\n"
-"neu zu starten (Befehl: „service cups restart“)."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Die IP Adresse sollte etwa die Form „192.168.1.42“ haben!"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Die Prot Nummer muss eine Zahl sein!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-Server-IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatische CUPS Konfiguration"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Geräteerkennung..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Test der Anschlüsse"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Drucker hinzufügen"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Willkommen zum Druckereinrichtungsassistenten\n"
-"\n"
-"Dieser Assistent hilft Ihnen lokale oder entfernte Drucker so einzurichten, "
-"dass dieser Rechner bzw. andere in Ihrem Netzwerk darauf drucken können.\n"
-"\n"
-"Sie werden nur nach den nötigen Informationen über den Drucker gefragt, um "
-"Ihnen dann Zugriff auf Treiber,  Druckoptionen und Anschlussart zu erhalten."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokaler Drucker"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Willkommen zum Druckereinrichtungsassistenten\n"
-"\n"
-"Dieser Assistent hilft Ihnen lokale Drucker einzurichten, dass dieser "
-"Rechner bzw. andere in Ihrem Netzwerk darauf drucken können.\n"
-"\n"
-"Bitte schließen sie Ihre(n) Drucker an, und stellen Sie sicher dass das "
-"Gerät/die Geräte eingeschaltet ist/sind. Betätigen sie die Schaltfläche "
-"„Weiter“, wenn Sie fortfahren möchten bzw. „Abbruch“, wenn Sie jetzt keinen "
-"Drucker einrichten möchten.\n"
-"\n"
-"In seltenen Fällen kann es zum totalen stenenbleien des Rechners führen, "
-"wenn Sie eine Drucker-Selbsterkennung durchführen. Schalten Sie diese "
-"einfach aus, wenn Sie einen Drucker ohne Selbsterkennung durchführen wollen. "
-"Verwenden Sie den  „Expertenmodus“ von PrinterDrake, um einen entfernten "
-"Drucker einzurichten, falls er nicht automatisch aufgeführt wird."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Drucker-Selbsterkennung"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Herzlichen Glückwunsch, Ihr Drucker ist nun installiert und eingerichtet!\n"
-"\n"
-"Sie können nun mit dem „Drucken“ Befehl Ihrer Anwendungen (meistens im "
-"„Datei“-Menü zu finden) drucken.\n"
-"\n"
-"Falls Sie einen Drucker hinzufügen, entfernen oder umbenennen wollen,\n"
-"oder wenn Sie die Standardeinstellungen wie Papierschacht oder \n"
-"Druckqualität) anpassen wollen, wählen Sie „Drucker“ im „Hardware“\n"
-"Bereich des Mandrake Kontrollzentrums."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Selbsterkennung von Druckern"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"PrinterDrake ist in der Lage Ihre Parallelport- und USB-Drucker selbst\n"
-"zu erkennen und einzurichten. In einigen seltenen Fällen KANN ES JEDOCH\n"
-"ZUM TOTALEN STEHENBLEIBEN DES BETRIEBSSYSTEMS FÜHREN! Verwenden Sie \n"
-"diese Variante also AUF IHR RISIKO!\n"
-"\n"
-"Wollen Sie wirklich, dass PrinterDrake eine Selbsterkennung versucht?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Autoerkennung durchführen"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Drucker selbst einrichten"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "%s gefunden"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Drucker an Parallelport \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB-Drucker \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Es wurde kein lokaler Drucker erkannt! Um ihn manuell hinzuzufügen geben Sie "
-"einfach einen Geräte- oder Dateinamen in der Eingabezeile an (Parallele "
-"Anschlüsse: /dev/lp0, /dev/lp1, ..., äquivalent zu LPT1:, LPT2:, ...; Erster "
-"USB Drucker: /dev/usb/lp0, zweier USB Drucker: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Sie müssen einen Geräte- oder Dateinamen eingeben!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Kein Lokaler Drucker erkannt!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Netzwerkdrucker können erst nach der Installation eingerichtet werden. "
-"Wählen Sie „Einstellungen/Hardware/Drucker“ im Mandrake Kontrollzentrum."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Um Netzwerkdrucker zu installieren wäen Sie bitte „Abbruch“, wechseln in den "
-"„Expertenmoduns“ und wählen erneut „Drucker hinzufügen“."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Der folgende Drucker wurde automatisch erkannt, falls es sich nicht um den "
-"Drucker handelt, den Sie einrichten wollen, geben Sie einen Geräte- oder "
-"Dateinamen in der Eingabezeile an."
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Hier eine Liste aller automatisch erkannten Drucker. Bitte wählen Sie den "
-"gewünschten Drucker oder geben Sie einen Geräte- oder Dateinamen in der "
-"Eingabezeile an."
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Der folgende Drucker wurde automatisch erkannt. Die Einrichtung wird voll "
-"automatisch erfolgen. Sollte Ihr Drucker nicht richtig erkannt worden sein, "
-"oder wollen Sie die Einrichtung selbst vornehmen, wählen Sie „Manuelle "
-"Konfiguration“."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Hier eine Liste aller automatisch erkannten Drucker. Bitte wählen Sie den "
-"gewünschten Drucker. Die Einrichtung wird voll automatisch erfolgen. Sollte "
-"Ihr Drucker nicht richtig erkannt worden sein, oder wollen Sie die "
-"Einrichtung selbst vornehmen, wählen Sie „Manuelle Konfiguration“."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Bitte wählen Sie den Anschluss, an dem der Drucker hängt oder geben Sie "
-"einen Geräte- oder Dateinamen in der Eingabezeile an."
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Bitte wählen Sie den Anschluss, an dem Ihr Drucker hängt."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Parallele Anschlüsse: /dev/lp0, /dev/lp1, ..., äquivalent zu LPT1:, "
-"LPT2:, ..., Erster USB Drucker: /dev/usb/lp0, zweier USB Drucker: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Sie müssen einen Drucker wählen/ein Gerät eingeben!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Manuelle Konfiguration"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Ist Ihr Drucker ein Multifunktionsgerät von HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 mit Scanner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Installiere das „HPOJ“-Paket ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Geräte untersuchen und HPOJ einrichten ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Installiere das „SANE“-Paket ..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Scannen mit Ihrem HP-Multifunktionsgerät"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "CUPS den Drucker-Port zugänglich machen ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Lesen der Drucker-Datenbank ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Optionen für Netzwerk-Druckerspooler"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Um eine entfernte lpd Warteschlange zu verwenden, müssen Sie den "
-"Rechnernamen des Drucker-Servers sowie den Druckernamen auf diesem Server "
-"angeben, an den die Aufträge übertragen werden sollen."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Name des entfernten Rechners"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Name des entfernten Druckers"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Der Name des entfernten Rechners fehlt!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Der Name des entfernten Druckers fehlt!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Drucker-Parameter"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Um auf einem SMB-Drucker zu drucken sind folgende Angaben erforderlich: Der "
-"SMB-Rechnername des Drucker-Servers (entspricht nicht immer dem TCP/IP-"
-"Rechnernamen des Computers) und möglicherweise die IP-Adresse, Freigabename "
-"für den Drucker, auf den Sie zugreifen möchten, sowie entsprechender "
-"Benutzername, Passwort und Arbeitsgruppe."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB-Server"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB-Server-IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Freigabename"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Arbeitsgruppe"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Sie müssen entweder Den Servernamen oder seine IP-Adresse angeben!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Der Name der Samba-Freigabe fehlt!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Optionen für NetWare-Drucker"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Um auf einem NetWare-Drucker zu drucken sind folgende Angaben erforderlich: "
-"Name des NetWare-Drucker-Servers (entspricht nicht immer dem TCP/IP-"
-"Rechnernamen des Computers), Name der Drucker-Warteschlange, sowie falls "
-"notwendig, den entsprechenden Benutzernamen samt Passwort."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Drucker-Server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Name der Druckerwarteschlange"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Der NCP Servername fehlt!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Der NCP Warteschlangen-Name fehlt!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Optionen für TCP/Socket-Drucker"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Um einen TCP- oder Socket-Drucker verwenden zu können, müssen Sie auf alle "
-"Fälle dessen Rechnernamen, möglicherweise auch den Port, angeben. Bei HP "
-"JetDirect Servern ist dies normalerweise die Port-Adresse 9100, bei anderen "
-"Servern kann es eine andere sein. Schauen Sie im Zweifelsfall in die "
-"Unterlagen Ihrer Hardware."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Rechnername des Druckers"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Der Rechnername des Druckers fehlt!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Druckeranschluss URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Sie können hier direkt die URI eines Druckers angeben. Die URI muss den CUPS "
-"bzw. den Foomatic Spezifikationen genügen. Es sei hier noch angemerkt, dass "
-"nicht alle URI-Typen von allen Drucksystemem unterstützt werden."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Sie müssen eine gültige URI eingeben!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Jeder Drucker benötigt einen Namen (etwa „Drucker“).\n"
-"Beschreibung und Standort müssen nicht ausgefüllt werden.\n"
-"Sie dienen nur als Kommentare für den Anwender."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Druckername"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Beschreibung"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Standort"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Vorbereiten der Drucker-Datenbank ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Ihr Druckermodell"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"PrinterDrake hat den Modellnamen der Selbsterkennung mit den Modellen in der "
-"Datenbank verglichen, um den besten Treiber zu finden. Die Auswahl kann "
-"jedoch falsch sein, etwa wenn Ihr Drucker nicht in der Datenbank vorhanden "
-"ist. Kontrollieren Sie, ob die Wahl korrekt ist und wählen Sie die "
-"Schaltfläche „Das Modell ist richtig“, wenn der Treiber Ihren Wün "
-"entspricht, andernfalls betägen Sie „Modell auswählen“, um die Auswahl "
-"selbst vorzunehmen.\n"
-"\n"
-"Folgender Drucker wurde gefunden:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Das Modell ist richtig"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Modell auswählen"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Auswahl des Druckertyps"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Über welchen Druckertyp verfügen Sie?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Kontrollieren Sie bitte, ob PrinterDrake Ihern Drucker korrekt erkannt hat. "
-"Falls die Markierung auf einem falschen Gerät oder auf „Rohdaten-Drucker“ "
-"steht, suchen Sie bitte selbst Ihren Drucker in der Liste."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Falls Ihr Drucker nicht aufgeführt ist wählen Sie bitte ein kompatibles bzw "
-"ähnliches Modell (Für Einzelheiten schauen Sie bitte in Ihr Druckerhandbuch)."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI Win-Drucker Konfiguration"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Sie versuchen, eine OKI Win-Laserdrucker einzurichten. Da diese Drucker ein "
-"sehr eigenwilliges Protokol verwenden, funktionieren sie nur, wenn sie am "
-"ersten Parallelport angeschlossen sind. Sollte Ihr Druker an einer anderen "
-"Schnittstelle oder an einer Printserver-Box hängen, schließen Sie ihn bitte "
-"an den ersten Parallelport, bevor Sie versuchen eine Testseite zu drucken ..."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark Tintenstrahl-Konfiguration"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Der Lexmark Tintenstrahl-Druckertriber unterstützt nur lokale Drucker, keine "
-"Drucker auf entfernten Rechnern oder an Printserver-Boxen. Bitte schließen "
-"Sie den Druker direkt an Ihren Rechner oder richten Sie ihn auf dem Rechner "
-"ein, an den er angeschlossen ist."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Um mit Ihrem Lexmark Tintenstrahldrucker drucken zu können, benötigen Sie "
-"die Treiber, die von Lexmark bereitgestellt werden (http://www.lexmark."
-"com/). Gehen Sie auf die amerikanische Seite und wälen Sie die Schaltfäe "
-"„Drivers“. Wählen Sie dann das Drukermodell und geben Sie „Linux“ als "
-"Bertiebssystem an. Sie erhalten die Treiber als RPM-Paket oder als "
-"Shellskript mit interaktiver Grafikinstallation. Sie müssen die Einrichtung "
-"nicht mit dem Lexmark Klicktool vornehmen. Sie können direkt nach der Lizenz "
-"auf „Abbruch“ drücken. Drucken Sie dann Druckkopf-Einrichtungsseiten mit "
-"„lexmarkmaintain“ und justieren Sie damit den Druckkopf."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Standard-Einstellungen des Druckers\n"
-"\n"
-"Sie sollten sicherstellen, dass Papiergröße, Farbangaben, Druckqualität "
-"sowie Informationen zu vorhandenem Speicher, Duplexeinheit und Papierfächern "
-"richtig eingestellt sind. Es sei auch angemerkt, dass häufig mit steigender "
-"Druckqualität die Druckgeschwindigkeit sinkt."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Der Parameter %s muss eine Zahl sein!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Der Parameter %s muss eine Zahl sein!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Der Parameter %s ist yu groß oder zu klein!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Möchten Sie diesen Drucker („%s“)\n"
-"als Standarddrucker verwenden?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testseiten"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Bitte wählen Sie, welche Testseiten Sie drucken wollen.\n"
-"\n"
-"Bemerkung: Der Druck der Foto-Testseite dauert häufig extrem lange. Bei "
-"Laserdruckern mit wenig Speicher kann es auch vorkommen, dass sie gar nicht "
-"gedruckt wird. Normalerweise sollte es ausreichen, die Standard-Testseiten "
-"auszudrucken."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Keine Testseiten"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Drucken"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standard-Testseite"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternative Testseite (US-Format - „Letter“)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternative Testseite (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Foto-Testseite"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Keine Testseite(n) drucken"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Druck der Testseite(n) ..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Die Testseite(n) wurden an den Drucker gesandt.\n"
-"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
-"Druckstatus:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Die Testseite(n) wurden an den Drucker gesandt.\n"
-"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "War der Ausdruck korrekt?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Rohdaten-Drucker"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Sie können sowohl den Befehl „%s <datei>“ verwenden, wenn Sie in einer "
-"Konsole die Datei „<datei>“  drucken wollen, als auch ein grafisches "
-"Hilfsprogramm verwenden: „xpp <datei>“ oder „kprinter <datei>“. Die "
-"grafischen Hilfsprogramme erlauben Ihnen auf einfache Weise den richtigen "
-"Drucker zu wählen und die notwendigen Druckerparameter anzugeben.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Sie können diese Befehle auch in der „Druck-Kommando“-Zeile des Druckdialogs "
-"zahlreicher Anwendungen angeben, lassen Sie jedoch den Dateinamen weg, da "
-"die zu druckende Datei von der Anwendung geliefert wird.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Der Befehl „%s“ erlaubt es Ihnen auch zahlreiche Einstellungen für einen "
-"bestimmten Druckauftrag zu ändern. Geben Sie die gewünschten Angaben einfach "
-"in der Kommandozeile mit an, etwa: „%s <Datei>“. "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Um alle existierenden Optionen des Druckers zu erfahren, lesen Sie entweder "
-"die unten angegebene Liste oder betätigen Sie die Schaltfläche „Liste der "
-"Drucker-Optionen“. %s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Hier die Liste vorhandener Drucker-Parameter des aktuellen Druckers:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Verwenden Sie den Befehl „%s <Datei>“, um die Datei <Datei> in der "
-"Kommandozeile auszudrucken.\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Sie können diesen Befehl auch im „Druckkommando“-Feld vieler Programme "
-"angeben. Tragen Sie bitte keinen Dateinamen ein, da dieser vom Programm "
-"ergänzt wird.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Um eine Liste der Drucker-Parameter Ihres Druckers zu erhalten, betätigen "
-"Sie bitte die Schaltfläche „Liste der Drucker-Optionen“."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Verwenden Sie einen der Befehle „%s <Datei>“ oder „%s <Datei>“, um die Datei "
-"<Datei> in der Kommandozeile auszudrucken.\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Sie können auch das Grafikwerkzeug „xpdq“ zum setzen der Optionen und "
-"Verwalten der Druckjobs verwenden.\n"
-"Falls Sie KDE als Arbeitsoberfläche nutzen, haben Sie eine Panik-Abschaltung "
-"in Forma des Arbeitsflächensymbols „STOP Printer!“, dass sofort alle "
-"Druckaufträge anhä, wenn Sie es betägen. Das kann beispielsweise dann "
-"hilfreich sein, wenn Sie einen Papierstau in Ihrem Drucker haben.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Die Befehle „%s“ und „%s“ erlauben es Ihnen ebenfals die Optionen eines "
-"spezeiellen Druckjobs zu konfigurieren. Fügen Sie einfach die gewünschten "
-"Einstellungen in der Kommandozeile ein, etwa „%s <Datei>“.\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Schließen"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Drucken/Scannen mit „%s“"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Drucken auf Drucker „%s“"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Liste der Drucker-Optionen"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Ihr HP-Multifunktionsgerät wurde automatisch auch zum Scannen eingerichtet. "
-"Sie können nun mit „scanimage“ („scanimage -d hp:%s“ um den Scanner "
-"auszuwählen, falls Sie mehrere angeschlossen haben) aus der Kommandozeile "
-"oder mit „xscanimage“ bzw. „xsane“ - wenn Sie eine grafisches Werkzeug "
-"verwenden wollen - scannen. Wenn sie mit dem GIMP arbeiten wollen, können "
-"Sie dies ebenfalls tun. Wählen Sie einfach im Menü „Datei/Holen“ den "
-"entsprechenden Eintrag. Sie können sich auch mittels „man scanimage“ bzw "
-"„man sane-hp“ in der Kommandozeile weitere Informationen ausgeben lassen.\n"
-"\n"
-"Verwenden Sie für dieses Gerät nicht „ScannerDrake“!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Ihr HP-Multifunktionsgerät wurde automatisch auch zum Scannen eingerichtet. "
-"Sie können nun in der Kommandozeile mittels „ptal-hp %s scan ...“ scannen. "
-"Zur Zeit existieren leider keine grafischen Werkzeuge, mit deren Hilfe Sie "
-"Scannen können - Ihr Multifunktionsgerät wird noch nicht unterstützt. "
-"Weitetre Informationen finden Sie in der Datei „/usr/share/doc/hpoj-0.8/ptal-"
-"hp-scan.html“ auf Ihrem Rechner. Falls Sie einen HP LaserJet 1100 oder 1200 "
-"haben, können Sie nur scannen, wenn Sie die Scanner-Option installiert "
-"haben.\n"
-"\n"
-"Verwenden Sie für dieses Gerät nicht „ScannerDrake“!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Lesen der Treiber-Datenbank ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Drucker-Einstellung transferieren"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Sie können die Druckerkonfiguration, die Sie für den Spooler „%s“ "
-"vorgenommen haben für „%s“, ihren aktuellen Spooler, verwenden. Alle Daten "
-"(Name, Beschreibung, Standort, Verbindungsart und standard "
-"Optionseinstellungen) werden übernommen, Druckjobs in der alten "
-"Warteschlange gehen jedoch verloren.\n"
-"Nicht alle Warteschlangen können übernommen werden:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS unterstützt keine Druker an Novel Servern oder Drucker, die ihre Daten "
-"in ein frei gewähltes Kommando senden.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ unterstützt nur lokale Drucker, entfernte LPD Drucker und Socket/TCP "
-"Drucker.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD und LPRng unterstükeine IPP Drucker.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Warteschlangen, die nicht mit diesem Programm oder „foomatic-configure“ "
-"ertellt wurden, können nicht übertragen werden."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Drucker, die mit den PPD-Dateien ihrer Hersteller oder CUPS-spezifischen "
-"Treibern eingerichtet wurden, können nicht übertragen werden."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Markieren Sie die Druckerwarteschlangen, die sie übertragen wollen und "
-"betätigen Sie die Schaltfläche „Übertragen“."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Druckerdaten nicht übertragen"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Übertragen"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Es existiert bereits ein Drucker mit Namen „%s“ unter %s.\n"
-"Durch betätigen der Schaltfäche „Übertragen“ können Sie ihn\n"
-"überschreiben. Sie können dem Drucker auch einen neuen \n"
-"Namen geben oder ihn einfach überspringen."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Druckernamen sollten nur Buchstaben, Ziffern und den Unterstrich unterhalten"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Der Drucker „%s“ existiert bereits. Wollen Sie ihn wirklich \n"
-"ersetzen?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Neuer Druckername"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Übertragen von „%s“ ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Sie haben Ihren alten Standarddrucker („%s“) übertragen, soll es auch Ihr "
-"Standarddrucker unter dem neuen Drucksystem „%s“ werden?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Aktualisieren der Druckerdaten ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Konfiguration eines entfernten Druckers"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Netzwerk starten ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Netzwerk jetzt konfigurieren"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Ihr Netzwerk ist nicht konfiguriert"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Sie wollen einen entfernten Drucker einrichten. Sie benötigen dafür ein "
-"funktionerendes Netzwerk, aber Ihr Netzwerk ist noch nicht eingerichtet. "
-"Sollten Sie dennoch fortfahren, ohne Ihr Netzwerk einzurichten, ist der "
-"Drucker hinterher nicht zu verwenden. Wie wollen Sie fortfahren?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Weiter ohne Netzwerkkonfiguration"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Das von Ihnen während der Installation eingerichtete Netzwerk kann jetzt "
-"nicht gestartet werden. Testen Sie bitte, ob es nach einem Neustart zur "
-"Verfügung steht. Falls nicht, berichtigen Sie die Einstellungen im Mandrake "
-"Kontrollzentrum unter „Netzwerk & Internet/Verbindung“. Versuchen Sie "
-"anschließend erneut den Drucker mittels „Hardware/Drucker“im Kontrollzentrum "
-"einzurichten."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Es wurde kein aktives Netzwerk gefunden und es konnte auch keine "
-"Netzwerkverbindung hergestellt werden. Kontrollieren Sie bitte Ihre Hardware "
-"und Ihre Softwareeinstellngen. Versuchen Sie anschließend erneut den "
-"entfernten Drucker einzurichten."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Drucksystem neu starten ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "Hoch"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "Paranoid"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installation eines Drucksystems in Sicherheitsebene %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Sie sind dabei das Drucksystem %s auf einem Rechner mit Sicherheitsebene %s "
-"zu installieren.\n"
-"\n"
-"Dieses Drucksystem läuft als Dämon (Hintergrundprozess), der auf "
-"Druckaufträge wartet, um sie abzuarbeiten. Da der Dämon auch für andere "
-"Rechner Ihres Netzwerks erreichbar ist,schaffen Sie damit einen möglichen "
-"Angriffspunkt. Aus Sicherheitsgründen werden in dieser Sicherheitsebene "
-"standardmäßig nur einige ausgewählte Dämons gestartet.\n"
-"\n"
-"Wollen Sie wirklich dieses Drucksystem auf diesem Rechner installieren?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Drucksystem beim BS-Start aktivieren"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Das Drucksystem (%s) wird nicht automatisch beim Betriebssystemstart "
-"aktiviert.\n"
-"Es ist möglich, dass der Start durch den Wechsel in eine höhere "
-"Sicherheitsebene deaktiviert wurde, da das Drucksystem einen potentienllen "
-"Angriffspunkt darstellt.\n"
-"\n"
-"Wollen sie den automatischen Start des Drucksystems wieder herstellen?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Suche nach installierter Software"
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Entfernen von LPRng ..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Entfernen des LPD ..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Wählen Sie das Drucksystem"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Welches Drucksystem (Spooler) wollen Sie verwenden?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurieren von Drucker „%s“ ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Installieren des Pakets Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Drucker-Optionen"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "PrinterDrake vorbereiten ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Anwendungen konfigurieren ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Möchten Sie einen Drucker konfigurieren?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Drucksystem: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "PrinterDrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Die folgenden Drucker sind bereits eingerichtet. Führen Sie einen "
-"Doppelklick auf einem aus, um ihn zu ändern, als Standarddrucker zu "
-"verwenden, Informtionen über ihn zu erhalten oder einen entfernten CUPS-"
-"Server für Star/OpenOffice zugänglich zu machen."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Die folgenden Drucker sind bereits eingerichtet. Führen Sie einen "
-"Doppelklick auf einem aus, um ihn zu ändern, als Standarddrucker zu "
-"verwenden oder Informtionen über ihn zu erhalten."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Aktualisiere Druckerliste (um alle entfernten CUPS-Drucker anzuzeigen)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Drucksystem ändern"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normaler Modus"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Möchten Sie einen weiteren Drucker einrichten?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Drucker-Konfiguration ändern"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Drucker %s\n"
-"Was wollen Sie an diesem Drucker ändern?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Ausführen!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Art der Druckeranbindung"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Druckername, Beschreibung, Standort"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Druckerproduzent, Modell, Treiber"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Druckerproduzent, Modell"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Als Standarddrucker verwenden"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Diesen Drucker für StarOffice/OpenOffice.org hinzufügen"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Diesen Drucker für StarOffice/OpenOffice.org entfernen"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Testseite(n) drucken"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Wie dieser Drucker genutzt werden kann"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Drucker entfernen"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Alten Drucker „%s“ entfernen ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Standarddrucker"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Der Drucker „%s“ ist jetzt Ihr Standarddrucker“"
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Drucker für StarOffice/OpenOffice.org hinzufügen"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"Der Drucker „%s“ wurde erfogrich zu StarOffice/OpenOffice.org hinzugefügt."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Fehler beim Hinzufügen von „%s“ für StarOffice/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Drucker für StarOffice/OpenOffice.org entfernen"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"Der Drucker „%s“ wurde erfogrich für StarOffice/OpenOffice.org entfernt."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Fehler beim Entfernen von „%s“ für StarOffice/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Möchten Sie den Drucker „%s“ wirklich entfernen?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Drucker „%s“ entfernen ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxies einstellen"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Herzlich willkommen zum Proxy Konfigurationsassistenten.\n"
-"\n"
-"Hier können Sie Ihre HTTP und FTP Proxies mit oder ohne\n"
-"Anmeldung und Passwortabfrage einrichten\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Bitte füllen Sie die HTTP Proxy Informationen aus\n"
-"Falls sie keinen HTTP Proxy wolen, lassen Sie einfach\n"
-"alle Felder leer."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Die URL muss mit „http:“ beginnen"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Die Prot Nummer muss eine Zahl sein!"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Bitte füllen Sie die FTP Proxy Informationen aus\n"
-"Falls sie keinen FTP Proxy wolen, lassen Sie einfach\n"
-"alle Felder leer."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Die URL muss mit „ftp:“ beginnen"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Bitte geben Sie - falls nötig - Kennzeichen und Passwort für den Proxy \n"
-"an. Lassen Sie die Felder leer, falls Sie sie kein Kennzeichen/Passwort \n"
-"wollen."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Kennzeichen"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Passwort"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Passwort (erneut)"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Die Passwörter stimmen nicht überein. Bitte versuchen Sie es eneut!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ich kann keine Partition zu dem _formatierten_ RAID md%d hinzufügen"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ich kann Datei „%s“ nicht schreiben"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid schlug Fehl"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid schlug Fehl (Möglicherweise fehlen die RAID-Tools)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nicht genügend Partitionen für RAID Level %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Startet das ALSA (Advanced Linux Sound Architecture) Sound System"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-"Mit dem Dienst anacron können cron-Prozesse auch zu anderen als den \n"
-"vorgegebenen Zeiten gestartet werden. Dies ist vor Allem dann \n"
-"sinnvoll, wenn Ihr Rechner nicht rund um die Uhr läuft, da sonst \n"
-"Prozesse, die etwa zwischen Mitternacht und 6:00 Uhr gestartet \n"
-"werden sollten, nie ausgeführt würden."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Der APM-Dienst (apmd) wird von Laptops verwendet, um den Ladestatus \n"
-"der Batterie durch den Syslog-Dienst erfassen zu lassen. Mit seiner \n"
-"Hilfe kann man den Rechner auch rechtzeitig herunterfahren lassen, \n"
-"bevor die Batterien leer sind."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Dieser Dienst startet Applikationen der at-Warteschlange wenn der \n"
-"dafür vorgesehene Zeitpunkt erreicht ist. Lässt die Systemauslastung \n"
-"es zu, werden sog. Batch-Anwendungen gestartet."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Der Befehl cron wird unter UNIX/Linux dazu verwendet, Benutzerprogramme \n"
-"zu vordefinierten regelmäßigen Zeiten abzuarbeiten. \n"
-"Der Dienst vixie cron erweitert dieses Konzept um weitere Funktionen, etwa \n"
-"ein verbessertes Sicherheitskonzept und einfachere Konfiguration."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Der GPM-Dienst stellt Ihnen Mausunterstützung auf Text-Konsolen zur \n"
-"Verfügung. Sie erhalten damit die Möglichkeit Ausschneiden und \n"
-"Einfügen von Text wie unter X zu verwenden. In einigen Applikationen \n"
-"können Sie auch Pop-Up-Menüs damit bedienen."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake führt Hardwaretests durch, und konfiguriert (falls nötig) \n"
-"neue/geänderte Hardware."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache ist ein World-Wide-Web-Server. Mit seiner Hilfe können Sie \n"
-"HTML-Dateien über HTTP publizieren. Der Server ist CGI-fähig."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Der Internet Superserver-Dienst (inetd) startet je nach Bedarf \n"
-"etliche andere Internet-Dienste, so etwa telnet, ftp, rsh oder \n"
-"rlogin. Dies jedoch nur, wenn die entsprechenden Dienste in der \n"
-"Datei „/etc/inetd.conf“ freigeschaltet sind. \n"
-"Schalten Sie diesen Dienst ab, können Sie keine der von inetd \n"
-"verwalteten Dienste mehr zugreifen."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Startet Paketfilterung für Linux 2.2er Kerne, um Ihren Rechner \n"
-"durch eine Firewall vor Angriffen aus dem Netz zu schützen."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Dieser Dienst lädt die Tastaturbelegung, die in der Datei \n"
-"„/etc/sysconfig/keyboard“ angegeben ist. Mittels „kbdconfig“ \n"
-"können Sie diese Einstellung ändern. Schalten Sie diesen Dienst ab, \n"
-"müssen Sie ab dem nächsten Systemstart mit der amerikanischen \n"
-"Tastatur vorlieb nehmen."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatische Neuerstellung der Kern-Header in /boot für\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Automatische Erkennung und Konfiguration neuer Hardware während des \n"
-"Betriebssystemstarts."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf versucht beim Betriebssystemstart einige Verwaltungsaufgaben \n"
-"auszuführen."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Der Dienst lpd ist der Drucker-Server Ihres Rechners. Wenn Sie \n"
-"diesen Dienst abschalten werden Druckaufträge nicht mehr abgearbeitet.\n"
-"Hauptaufgabe von lpd ist es, Druckaufträge an den jeweiligen \n"
-"zuständigen Drucker (dieser kann auch einen anderen Rechner hängen) \n"
-"zu senden."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Der Linux Virtual Server kann verwendet werden, um um ein \n"
-"hochperformanten Hochverfügbarkeitsserver aufzusetzen."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Der Dienst named (BIND) stellt ihnen einen Server zur Verfügung, \n"
-"mit dessen Hilfe Rechnernamen in IP-Adressen umgesetzt werden. \n"
-"Ein solcher Dienst wird „Domain Name Server“ (DNS) genannt. \n"
-"Falls Sie nur einen Rechner besitzen, mit dem Sie per Modem/ISDN ins \n"
-"Netz gehen, benötigen Sie diesen Dienst nicht."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Dieser Dienst ist verantwortlich dafür, dass alle Netzwerk-Dateisysteme \n"
-"(NFS) bei Systemstart eingehängt werden, etwa SMB (Lan Manager/Windows) \n"
-"und NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Dieser Dienst aktiviert Netzwerkgeräte (etwa Netzwerkkarten), die \n"
-"so konfiguriert wurden, dass sie ab dem Systemstart zur Verfügung \n"
-"stehen sollen."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ist ein geläufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
-"durch verschiedene Rechner gemeinsam nutzen zu können. \n"
-"Dieser Dienst stellt Ihnen einen solchen Server zur Verfügung. \n"
-"Konfiguriert wird er in der Datei „/etc/exports“."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ist ein geläufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
-"durch verschiedene Rechner gemeinsam nutzen zu können. \n"
-"Der Dienst nfslock stellt Ihnen hierfür Locking-Mechanismen zur \n"
-"Verfügung, damit eine Datei nicht durch mehrere Personen \n"
-"gleichzeitig verändert werden kann."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Schaltet beim Betriebssystemstart automatisch die „Num“-Taste für \n"
-"die virtuellen Konsolen und XFree ein."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Unterstützung für den OKI 4w und kompatible WinDrucker."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA wird normalerweise in Laptops verwendet, um Ethernet-Karten \n"
-"oder Modems verwenden zu können. Dieser Dienst wird nur gestartet, \n"
-"wenn Sie ihn vorher konfiguriert haben. Daher schadet es nicht, \n"
-"wenn Sie ihn auf Rechnern aktivieren, auf denen er nutzlos ist."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Mittels portmapper werden RPC-Verbindungen verwaltet, die etwa von \n"
-"den Protokollen NFS und NIS verwendet werden. Auf Rechnern, die \n"
-"solche Server (RPC-basierte) beherbergen, muss dieser Dienst \n"
-"aktiviert sein."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix ist ein E-Mail Transport-Dienst. Mit seiner Hilfe werden \n"
-"E-Mails zwischen verschiedenen Rechnern weitergeleitet."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Dieser Dienst speichert beim Herunterfahren des Rechners den Zustand \n"
-"des Zufallszahlengenerators, um ihn beim nächsten Systemstart \n"
-"wieder zu restaurieren. Die Qualität erzeugter Zufallszahlen \n"
-"wird dadurch verbessert."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Weist Roh-Geräten ein blockorientiertes Gerät (etwa eine\n"
-"Festplattenpartition) zu. Dies wird für Anwendungen wie\n"
-"etwa ORACLE benötigt"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Der Dienst routed ermöglicht ein automatisches Aktualisieren der \n"
-"IP-Routing-Tabellen mittels RIP Protokoll. Zwar wird RIP in kleinen \n"
-"Netzwerken verwendet, jedoch wird für komplexere Netzwerke ein \n"
-"anderer Dienst benötigt."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Der Dienst rstat ermöglicht es Anwendern anderer Rechner des \n"
-"Netzwerks Preformance-Daten dieses Rechners zu erhalten."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Der Dienst rusers ermöglicht es Anwendern anderer Rechner \n"
-"herauszubekommen, welche Benutzerkennzeichen auf diesem Rechner \n"
-"gerade angemeldet sind."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Der Dienst rwho erlaubt es Benutzern entfernter Rechner eine Liste\n"
-"momentan angemeldeter Benutzerkennzeichen übermittelt zu bekommen \n"
-"(ähnlich wie finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Starten des Sound-Systems Ihres Rechners"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Mittels Syslog versuchen zahlreiche Dienste Verlaufsprotokolle \n"
-"in vorgesehene Dateien zu sichern. Es ist sinnvoll Syslog immer \n"
-"aktiviert zu haben."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Lädt die Treiber für Ihre USB-Geräte."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Dieser Dienst startet den X-Font-Server. Er ist notwendig, \n"
-"damit XFree gestartet werden kann!"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Wählen Sie, welche Dienste\n"
-"automatisch beim Systemstart\n"
-"aktiviert werden sollen"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Drucken"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Gemeinsamer Dateizugriff"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "System"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Fernwartung"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Datenbankserver"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Dienste: %d aktiviert von %d registrierten."
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Dienste"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "aktiv"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "gestoppt"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Dienste und Dämonen"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Es existieren leider keine\n"
-"weiteren Informationen zu\n"
-"diesem Dienst."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Bei BS-Start"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stopp"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Danke, dass Sie sich für Mandrake Linux 8.2 entschieden haben"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Willkommen in der Open Source Welt."
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Der Erfolg von MandrakeSoft basiert auf dem Prinzip freier Software. Ihr "
-"neues Betriebssystem ist das Ergebnis einer weltweiten Zusammenarbeit der "
-"GNU/Linux-Gemeinde."
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Betreten Sie die Welt der Freien Software"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Wollen Sie die Open Source Gemeinde kennen lernen? Ein Teil von ihr werden? "
-"Beteiligen Sie sich an den Diskussionsforen, die Sie auf unseren „Community“-"
-"Seiten finden."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet und Messaging"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 stellt Ihnen die beste Softwareauswahl bereit, um auf "
-"alles, was das Internet bietet, zugreifen zu können. Surfen Sie im Web mit "
-"Mozilla oder Konqueror, bearbeiten Sie E-Mails und verwalten Sie persönliche "
-"Informationen mit Evolution, KMail oder zahlreichen anderen Programmen."
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia und Grafik"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 reizt Ihren Multimediarechner voll aus! Verwenden Sie die "
-"neuste Software, um Audiodateien abzuspielen, Ihre Fotos und Bilder zu "
-"bearbeiten sowie Videos abzuspielen..."
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Entwicklungsplattform"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 ist die ultimative Entwicklungsplattform. Nutzen Sie die "
-"volle Power des GNU C Compilers sowie der besten Open Source "
-"Entwicklungsumgebungen."
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrollzentrum"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Das Mandrake Linux 8.2 Kontrollzentrum ist der zentrale Ort, an dem Sie Ihr "
-"System nach Ihren Wünschen anpassen können."
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Arbeitsumgebungen"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 bietet 11 verschiedene grafische Arbeitsumgebungen und "
-"Windowmanager. Darunter GNOME 1.4, KDE 2.2.2 und Window Maker 0.8"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Server Software"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Verwandeln Sie Ihren Rechner mit ein paar Mausklicks in einen "
-"leistungsfähigen Server: Web, E-Mail, Firewall, Router, Datei- und "
-"Druckserver, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Spiele"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 bietet die besten Open Source Spiele - Arcade, Baller, "
-"Karten, Sport, Strategie, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Sie wollen GNU/Linux in eine einfache, schnelle und vor Allem freie Weise "
-"erlernen? MandrakeSoft bieten ein freies Linux Training sowie einen Weg "
-"Ihren Fortschirtt mit unserem Online Trainingcenter „MandrakeCampus“ zu "
-"testen."
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Qualitativ hochwertiger Support aus der GNU/Linux Gemeinde und von "
-"MandrakeSoft ist nur einen Mausklick weit entfernt. Sind Sie bereits ein "
-"„alter Hase“ in Sachen GNU/Linux, werden Sie ein Experte, und teilen Sie Ihr "
-"Wissen mit Anderen auf unserer Support-Seite."
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Unsere Consultants sind bereit, Ihnen für alle Ihre IT-Projekte individuelle "
-"Lösungen anzubieten, die genau Ihren Bedürfnissen entsprechen. MandrakeSoft "
-"als erfahrener Linux-Distributor bietet eine echte IT-Alternative für Ihr "
-"Unternehmen."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Unsere Linux Komplettlösungen, Sonderangebote und Mandrake Fan-Artikel "
-"bekommen Sie in unserem E-Shop"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Weitere Informationen über MandrakeSofts professionelle Dienstleistungs- und "
-"gewerbliche Angebote erhalten Sie unter:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact/"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Pakete Installieren ..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ich kann Ihre Partitionstabelle nicht lesen, sie ist fehlerhaft :-(\n"
-"Um fortfahren zu können setze ich die fehlerhaften Partitionen zurück"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Fehler!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ich kann die benötigte Abbild-Datei „%s“ nicht finden."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Auto-Installationskonfigurator"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Sie sind dabei, eine Auto-Installationsdiskette zu erstellen. Diese\n"
-"Möglichkeit ist gefährlich und sollte mit Vorsicht verwendet werden!\n"
-"\n"
-"Sie können mit diesem Werkzeug die Installation, die Sie auf Ihrem\n"
-"Rechner erneut durchspielen, wobei Sie an einigen Stellen interaktiv\n"
-"Einfluss nehmen zu können.\n"
-"\n"
-"Aus Sicherheitsgründen wird die Partitionierung und Formatierung nie\n"
-"automatisch durchgeführt.\n"
-"\n"
-"Wollen Sie fortfahren?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Automatische Konfiguration der Schritte"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Bitte wählen Sie für jeden Schritt, ob er wie bei Ihrer Installation "
-"vorgenommen werden soll, oder ob Sie ihn manuell durchführen wollen."
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Willkommen.\n"
-"\n"
-"Die Parameter der Autoinstallation sind in den Abschnitten rechts verfügbar."
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratuliere!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Die Diskette wurde erfolgreich erstellt.\n"
-"Sie können die Installation nun automatisch durchführen."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Auto-Installation"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Eintrag hinzufügen"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Letzten Eintrag entfernen?"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Dämon Report\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "Vortschritt"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Systemdateien sichern ..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Backup-Dateien auf der Festplatte ..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Benutzerdateien sichern ..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Festplattenbackup in Bearbeitung ..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Andere Dateien sichern ..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"Dateiliste per FTP senden: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP Verbindungsprobleme: Es war nicht möglich, Ihre Dateien per FTP zu "
-"übertragen.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Fehler beim Verschicken der Mail. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Dateiauswahl"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-"Wählen Sie die Dateien oder Verzeichnisse und betätigen Sie die Schaltfläche "
-"„Hinzufügen“"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Bitte wählen Sie alle benötigten Parameter.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Diese Optionen kön alle Ihre Dateien im Verzeichnis „/etc“ sichern und "
-"wiederherstellen\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Sichern Ihrer Systemdateien (Verzeicnis „/etc“)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Inkrementelles Backup (alte Backups nicht überschreiben)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Keine kritischen Dateien (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Mit dieser Option sind Sie in der Lage, jede Version Ihres \n"
-"„/etc“ Verzeichnisses wiederherzustellen."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Bitte wählen Sie alle Kennzeichen, deren Dateinen mitgesichert werden sollen."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Die Browser-Caches nicht archivieren."
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Inkrementelle Archivierung (alte Archive nicht ersetzen)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Markierte entfernen"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Benutzer"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "FTP-Verbindung zum erstellen der Sicherungskopien verwenden"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Rechnernamen oder IP eingeben."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Bitte geben Sie das Verzeichnis an,\n"
-" in dem die Archive erstellt werden sollen."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Bitte geben Sie Ihr Benutzerkennzeichen ein"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Bitte geben Sie Ihr Passwort ein"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Passwort behalten"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP Verbindung"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Sichere Verbindung"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Sicherungskopie auf CD/DVDROM"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Bitte wählen Sie Ihren CD-Paltz"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Kontrollieren Sie, ob Sie ein CDRW-Medium verwenden."
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Kontrollieren Sie, ob Sie die CDRW vorher löschen wollen."
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Bitte markieren, falls Sie \n"
-"„install boot“ auf Ihrer CD haben wollen."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Bitte geben Sie den Gerätenamen \n"
-"Ihres Brenners an, etwa „0,1,0“."
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Auf Bandlaufwerk sichern"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Bitte geben Sie den Gerätenamen fü Archivierung an."
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Bitte geben Sie die Maximalgröße \n"
-"für DrakBackup an."
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Bitte geben Sie das Archivverzeichnis an:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Quota für Backup-Datei verwenden."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Netzwerk"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM/DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Festplatte/NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "stündlich"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "täglich"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "wöchendlich"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "monatlich"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Dämon verwenden"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Bitte wählen Sie das Zeitintervall \n"
-"zwischen zwei Sicherungen."
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Bitte wählen Sie ein\n"
-"Sicherungsmedium."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Festplatte mit Dämin verwenden"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "FTP mit Dämon verwenden"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Stellen Sie sicher, dass der Cron-Dämon als Dienst aktiviert ist."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "E-Mail Bericht nach jedem Sicherungsvorgang an: "
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Was"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Wo"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Wann"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Mehr Parameter"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "DrakBackup Konfiguration"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Bitte wählen Sie wohin Sie die Sicherungskopien machen wollen."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "auf Festplatte"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "über Netzwerk"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Bitte wählen Sie, was Sie sichern wollen"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "System sichern"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Benutzerkennzeichen sichern"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Benutzerkennzeichen auswählen"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Sicherungsquellen: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Systemdateien:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Benutzerdateien:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Sonstige Dateien:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Auf Festplatte sichern unter: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Via FTP sichern auf: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t Benutzer: %s\n"
-"\t\t Pfad: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Optionen:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tKeine Systemdateien\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tSicherungen verwenden „tar“ und „bzip2“\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tSicherungen verwenden „tar“ und „gzip“\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Dämon (%s) enthält:\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t- Festplatte.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t- CD-ROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t- Netzwerk per FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t- Netzwerk per SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"Keine Konfiguration. Wählen Sie dein Assistenten oder Fortgeschritten.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Liste der wiederherzustellenden Daten:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Liste der beschädigten Daten:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-"Bitte entfernen Sie die Markierung oder löschen Sie sie das nächste Mal."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Die Sicherungen sind beschädigt."
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "            Alle Ihre gewälhten Daten wurden            "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "    erfolgreich auf %s wiederhergestellt   "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "    Konfiguration wiederherstellen   "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK, die übrigen Dateien zu aktualisieren."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Liste wiederherzustellender Kennzeichen (letztes Datum per Kennzeichen ist "
-"wichtig)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Systemdateien sichern vor:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Bitte wählen Sie, welches Datum wiederhergestellt werden soll."
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Auf Festpaltte sichern"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Von Festplatte wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Bitte geben Sie das Verzeichnis an, in dem die Sicherungskopien liegen"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Wählen Sie ein anderes Medium von dem Sie wiederherstellen wollen."
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Anderes Medium"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "System wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Benutzerkennzeichen wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Sonstiges wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "Auswahl des Pfades der wiederhergestellt werden soll (statt „/“"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Erstelle Sicherung vor dem Wiederherstellen (nur für inkrementelle "
-"Sicherungen)."
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Benutzerkennzeichen vor dem Wiederherstellen entfernen."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Alle Sicherungen wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Benutzergeführte Wiederherstellung"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Hilfe"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "<- Zurück"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Speichern"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Sicherung erstellen"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Weiter ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Bitte erstellen Sie eine Sicherung, bevor Sie wiederherstellen können.\n"
-"oder stellen Sie sicher, dass der Pfad zu den Sicherungen korrekt ist."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Sendmail Fehler\n"
-"  Ihre Bericht-Mail konnte nicht versandt werden.\n"
-"  Bitte richten Sie Sendmail korrekt ein."
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Zu installierende Pakete"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Fehler bei der Üertragung via FTP.\n"
-"Bitte korrigieren Sie Ihre FTP-Konfiguration."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Bitte wählen Sie die wiederherzustellenden Daten..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Bitte wählen Sie ein Sicherungsmedium..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Bitte wählen Sie die zu sichernden Daten..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Keine Konfigurationsdatei gefunde.\n"
-"Bitte wählen Sie den „Assistenten“ oder „Erweitert“."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "In Entwicklung, haben Sie noch etwas Geduld ..."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Systemdateien sichern"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Benutzerdateien sichern"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Andere Dateien sichern"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Fortschritt"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "Datenüagung via FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Dateien übertragen ..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Liste der Daten, die auf CD-ROM sollen."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Bitte geben Sie die CD-Brenngeschwindigkeit ein"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Bitte geben Sie den CD-Brenner an (etwa 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Bitte markieren, falls Sie „install boot“ auf Ihrer CD haben wollen."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Jetzt Sicherung anhand der Konfigurationsdatei erstellen."
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Sicherungskonfiguration anzeiegen"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Assistentengestützte Konfiguration"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Expertenkonfiguration"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Jetzt sichern"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "DrakBackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"Parameter:\n"
-"\n"
-" In diesem Schritt erlaubt Ihnen DrakBackup folgende Änderungen:\n"
-"\n"
-" - Kompressionsmodus:\n"
-"    \n"
-"      Mit der „bzip2“ Kompression, werden Ihre Daten\n"
-"      besser als mit „gzip“ komprimiert (ca. 2-10 %).\n"
-"      Standardmäßig ist dier Modus deaktiviert, da er\n"
-"      mehr Zeit benötigt (bis zu 1.000%).\n"
-" \n"
-" - Aktualisierungsmodus:\n"
-"\n"
-"      Mit dieser Option können Sie Ihre Sicherungskopie\n"
-"      aktuialisieren. Das ist momentan nicht sehr sinnvoll,\n"
-"      da Sie Ihre Kopie auspacken müssen, um sie \n"
-"      aktualisieren zu können.\n"
-"      \n"
-" - Der „.backupignore“-Mode:\n"
-"\n"
-"      Vie bei dem Programm „cvs“, wird DrakBackup alle\n"
-"      Dateien/Ordner, die in der Datei „.backupignore“\n"
-"      des aktuellen Verzeichnisses aufgeführt sind,\n"
-"      von der Sicherung ausschließen.\n"
-"      Beispiel:\n"
-"         > cat .backupignore\n"
-"         *.o\n"
-"         *~\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Einige der Sendmail-Fehler beruhen auf einer\n"
-" fehlerhaften PostFix Konfiguration. Um sie zu\n"
-" beheben müssen Sie „myhostname“ oder „mydomain“\n"
-" in „/etc/postfix/main.cf“ korrigieren.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"Parameter:\n"
-"\n"
-" - Systemdateien sichern:\n"
-"       \n"
-"\tDiese Option erlaub es Ihnen Ihr „/etc“ Verzeichnis\n"
-"\tmit den darin enthaltenen Konfigurationsdateien zu\n"
-"\tsichern. Seien Sie vorsichtig, damit Sie während der\n"
-"\tWiederherstellung folgende Dateien nicht überschreiben:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Benutzerdateien sichern:\n"
-"\n"
-"\tDiese Option erlaubt es Ihnen die Benutzerkenn-\n"
-"\tzeichen zu wählen, deren Daten gesichert werden\n"
-"\tsollen.\n"
-"\tEs ist sinnvoll, die Browser-Caches vom Sichern\n"
-"\tauszunehmen, um Sicherungsplatz zu sparen.\n"
-"\n"
-" - Andere Dateien sichern:\n"
-"\n"
-"\tMit dieser Option können Sie weitere Dateienn\n"
-"\tzum Sichern vorsehen. Sollten Sie diese Version\n"
-"\tverwenden, können Sie momentan keine inkre-\n"
-"\tmentellen Aktualisierungen vornehmen.\n"
-"\n"
-" - Inkrementelle Archivierung:\n"
-"\n"
-"\tInkrementelle Archivierung ist die mächtigste\n"
-"\tder vorhandenen Optionen. Sie erlaubt es\n"
-"\tIhnen beim ersten Aufruf eine komplette\n"
-"\tSicherungskopie Ihres Systems zu erstellen und\n"
-"\tanschließnd nur noch Änderungen zu speichern.\n"
-"\tSomit sind Sie in der Lage, während des Wieder-\n"
-"\therstellens, den Datenbestand eines bestimmten\n"
-"\tZeitpunkts zu erzeugen.\n"
-"\tSollten sie diese Alernative nicht gewählt haben,\n"
-"\twerden die alten Sicherungen vor dem Ertellen\n"
-"\teiner neuen Sicherungskopie gelöscht.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by Sebastien DUPONT <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"Parameter:\n"
-"\n"
-"Seien Sie vorsichtig, wenn Sie FTP-Sicherungskopien verwenden, \n"
-"da nur vollständig erstelle Sicherungskopien sum Server kopiert.\n"
-"werden. Die Sicherungskopie muss also erst lokal auf Ihrem \n"
-"Rechner erstellt werden.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Wiederherstellungsprobleme:\n"
-"\n"
-"DrakBackup wird bei der Wiederherstellung alle Dateien \n"
-"kontrollieren, bevor sie wiederhergestellt werden.\n"
-"Da vor der Wiederherstellung alle Dateien im \n"
-"Zielverzeichnis von DrakBackup gelöscht werden, \n"
-"gehen alle darin entghaltenen Daten verloren! \n"
-"Seien Sie daher vorsichtig und ändern Sie die Sicherungskopien \n"
-"nicht manuell.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Die Installation von %s schlug Fehl. Folgender Fehler trat auf:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Suche installierte Schriften"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Auswahl installierter Schriften zurücksetzen"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "Alle Schriften analysieren"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "Keine Schriften gefunden"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "Fertig"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "Ich konnte keine Schriften in Ihren eingehängten Partitionen finden"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Neuwahl korrekter Schriften"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "Konnte keine Schriften finden.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Suche installierter Schriften"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopiere Schriften"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installation von TrueType Schriften"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "Bitte warten Sie ttmkfdir arbeitet ..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "TrueType Installation beendet"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konvertieren der Schriften"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "Erzeuge „type1inst“"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscriptreferenz"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf-Schriftkonvertierung"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm-Schriftkonvertierung"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Temporäre Dateien löschen"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Neustart des X-FontServers"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Schriftdateien löschen"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs Neustart"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Stellen Sie sicher, das Sie das Recht haben, die Schriften die Sie \n"
-"in Ihr System einbinden wollen, zu verwenden.\n"
-"\n"
-"- Sie können die Schriften auf normalem Weg einbinden. In seltenen Fällen \n"
-"können defekte Schriften den X-Server lahmlegen."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Schriften einbinden"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Windows-Schriften verwenden"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Schiften deinstallieren"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Erweiterte Einstellungen"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Font-Liste"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Wählen Sie die Programme, die die Schriften verwenden sollen:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Generische Drucker"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Wählen Sie eine Schriftdatei bzw. ein Verzeichnis und betätigen Sie "
-"„Hinzufügen“"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Liste installieren"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "Klicken Sie hier, wenn Sie sicher sind."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "Hier, falls nicht."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Markierung löschen"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Alle auswählen"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Liste entfernen"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Vortests"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Schriften auf Ihren Rechner kopieren"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Installiere und konvertiere Fonts"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Nach der Installation"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Entfernen von Schriftarten auf Ihrem Rechner"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Nach dem Entfernen"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Teilen der Internet-Verbindung"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Teilen der Internetverbindung momentan eingeschaltet."
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Es wurde bereits eine geteilte Internet-Verbindung aufgesetzt.\n"
-"Momentan ist sie aktiviert.\n"
-"\n"
-"Was wollen Sie tun?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "deaktivieren"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "Verwerfen"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "neu konfigurieren"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Server deaktivieren ..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Teilen der Internet-Verbindung ist nun abgeschaltet."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Teilen der Internet-Verbindung momentan abgeschaltet."
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Es wurde bereits eine geteilte Internet-Verbindung aufgesetzt.\n"
-"Momentan ist sie deaktiviert.\n"
-"\n"
-"Was wollen Sie tun?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "aktivieren"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Server aktivieren ..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Teilen der Internetverbindung ist nun eingeschaltet."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Sie sind dabei, Ihren Rechner zu konfigurieren, dass er die eingerichtete \n"
-"Internetverbindung mit einem lokalem Netzwerk teilt.\n"
-"\n"
-"Anmerkung: Sie benötigen eine Netzwerkkarte, mit deren Hilfe Sie ein \n"
-"lokales Netz (LAN) aufsetzen können."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Schnittstelle %s (verwendet Modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Schnittstelle: %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Sie haben keine Netzwerkkarte!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ihr Rechner hat keine konfigurierte Netzwerkkarte. Bitte verwenden Sie erst "
-"HardDrake, bevor Sie weiter machen."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Netzwerkkarte"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sie haben nur eine konfiguriertes Netzwerkgerät an Ihrem Rechner:\n"
-"\n"
-"%s\n"
-"\n"
-"Ich setze ihr lokales Netz damit auf."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Bitte wählen Sie die Netzwerkkarte, die mit Ihrem lokalen Netzwerk \n"
-"verbunden ist."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Ihr Netzwerk ist bereits konfiguriert"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Warnung, das Netzwerkgerät „%s“ ist bereits konfiguriert.\n"
-"\n"
-"Wollen Sie eine automatische Neukonfiguration?\n"
-"\n"
-"Sie können auch eine manuelle Einrichtung vornehmen - dafür sollten Sie "
-"jedoch wissen, wie das funktioniert."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatische Rekonfiguration"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Aktuelle Schnittstellenkonfiguration anzeigen"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Aktuelle Konfiguration von „%s“:\n"
-"\n"
-"Netzwerk: %s\n"
-"IP-Adresse: %s\n"
-"IP-Eigenschaften: %s\n"
-"Treiber: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Ich kann Ihre aktuelle Konfiguration beibehalten und annehmen, dass Sie "
-"bereits einen DHCP-Server eingerichtet haben. Stellen Sie in diesem Fall "
-"sicher, dass ich Ihr Klasse-C Netzwerk korrekt erkannt habe. Ich werde es "
-"weder neukonfigurieren, noch Ihre DHCP-Konfiguration ändern.\n"
-"\n"
-"Ich kann jedoch auch Ihre Schnittstelle neu konfigurieren und einen DHCP-"
-"Server für Sie aufsetzen.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Lokales Klasse-C Netzwerk"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "(Diese) DHCP-Server IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Neu konfigurieren des Geräts und des DHCP-Servers"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Das lokale Netzwerk endet nicht auf „.0“ - bereinige."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Es liegt ein möglicher LAN-Adressen Konflikt in der Konfiguration\n"
-"von %s vor!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Ich habe eine Firewall-Konfiguration gefunden!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"WARNUNG: Ich habe eine eine Firewall-Konfiguration gefunden. \n"
-"Möglicherweise müssen Sie nach der Installation einige Einstellungen \n"
-"von Hand vornehmen."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigurieren ..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Skripte konfigurieren, Software installieren, Dienste starten ..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleme beim Installieren von Paket %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Es wurde alles eingerichtet.\n"
-"Sie können Ihre Internetverbindung nun anderen Rechnern in Ihrem \n"
-"lokalen Netz mittels automatischer Netzwerk-Konfiguration (DHCP) \n"
-"teilen."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Die Einstellungen wurden bereits vorgenommen, sie sind nur nicht aktiviert."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Die Einstellungen wurden bereits vorgenommen und sind aktiv."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Teilen der Internetverbindung wurde noch nicht konfiguriert."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Teilen der Internetverbindung - Konfiguration"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Willkommen zu DrakGW -\n"
-"das Werkzeug zum Teilen Ihrer Internetverbindung\n"
-"\n"
-"%s\n"
-"\n"
-"Wählen Sie „Konfigurieren“ wenn Sie den Assistenten starten wollen."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netzwerk Konfiguration (%d Karten)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Profil löschen..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Zu löschendes Profil: "
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Neues Profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "Name des neuen Profils (es wird als Kopie des aktuellen erstellt):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Rechnername: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internetzugang"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Typ:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Schnittstelle:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Bitte Warten"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Internet-Zugang konfigurieren"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN Konfiguration"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Treiber"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Schnittstelle"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Netzwerk konfigurieren"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Hier starten Sie den Assistenten ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistent..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Anwenden"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Einen Moment ... ich richte die Konfiguration ein"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Verbunden"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nicht Verbunden"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Verbinden ..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Trenne Verbindung ..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"WARNUNG: Es wurde bereits eine Internetverbindung gefunden. Vielleicht nutzt "
-"diese ihr Netzwerk."
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Sie haben noch keine Schnittstelle eingerichtet.\n"
-"Sie können dies tun, indem Sie die Schaltfläche \n"
-"„Konfigurieren“ betätigen."
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN Konfiguration"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Boot-Protokoll"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Beim Hochfahren gestartet"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP Klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "Jetzt aktivieren"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "Jetzt deaktivieren"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Diese Schnittstelle wurde noch nicht eingerichtet.\n"
-"Starten Sie den Konfigurationsassistenten im Hauptfenster."
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Sie haben noch keine Internetverbindung eingerichtet.\n"
-"Sie können dies tun, indem Sie die Schaltfläche \n"
-"„Konfigurieren“ betätigen."
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfiguration der Internetverbindung"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration der Internetverbindung"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Verbindungstyp: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameter"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Netzwerkkarte"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-Klient"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Sicherheitsebene einstellen"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrollzentrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Wählen Sie das Werkzeug, das Sie verwenden wollen"
-
-# ../../standalone/drakxtv_.c:37ç
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (Kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (terrestrisch)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (Kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (Kabel-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "China (terrestrisch)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japan (terrestrisch)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japan (Kabel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Osteuropa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irland"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Westeuropa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australien"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Neuseeland"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Südafrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentinien"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Bitte geben Sie Ihre Fernsehnorm und Region ein"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Fernsehnorm:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Region:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Sendersuche ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Sendersuche..."
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "Verwendung: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Bitte wählen Sie Ihren Tastaturtyp."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Wollen Sie, dass die Rücktaste auf den Konsolen Entfernen sendet?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "CD-ROM wechseln"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Bitte legen Sie die Installations-CD-ROM in Ihr Laufwerk und drücken \n"
-"Sie dann „OK“. Falls Sie sie nicht vorliegen haben, drücken Sie \n"
-"„Abbruch“."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ich bin nicht in der Lage, eine Live Aktualisierung durchzuführen!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Die Einstellungen wurden vorgenommen, werden jedoch erst nach einer "
-"Neuanmeldung wirksam"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "LogDrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Nur für diesen Tag zeigen"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Datei/_Neu"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Datei/_Öffnen"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Datei/_Speichern"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Datei/Speichern_als"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Datei/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Optionen"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Optionen/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Hilfe"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/_Hilfe/_Über..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Benutzer"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Nachrichten"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "SysLog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Erklärung der Mandrake Programme"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "Suche starten"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Ihre Logbücher betrachen"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Einstellungen"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "Übereinstimmung mit"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "keine Übereinstimmung mit"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Dateien wählen"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalender"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Inhalt der Logbücher"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "E-Mail/SMS Benachrichtigung"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Einen Moment, ich durchsuche: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Mail/SMS Benachrichtigungskonfiguration"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Herzlich willkommen zum E-Mail/SMS Konfigurationsassistenten.\n"
-"\n"
-"Hier können Sie Ihr Benachrichtigungssystem einrichten.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "Dienste einstellen"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Sie weden benachrtichtigt, falls einer der gewählten Dienste nichtmehr "
-"verfügbar ist."
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "Einstellungen laden"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Sie erhalten eine Nachricht, wen die Load über diesen Wert steigt"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "Benachrichtigungskonfiguration"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Stellen Sie ein, wie das System Sie benachrichtigen soll"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Speichern unter..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Bitte wählen Sie Ihren Maustyp."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "Kein „serial_usb“ gefunden\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Die dritte Maustaste emulieren?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s an %s gefunden. Wolen Sie ihn einrichten?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Wählen Sie einen Scanner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Dieser %s Scanner wird nicht unterstützt"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Boot Gerät"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Dieser %s Scanner muss von PrinterDrake konfiguriert werden.\n"
-"Sie können Pronterdrake im Mandrake-Kontrollzentrum im Hardware-Bereich "
-"starten."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Firewall-Konfiguration"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Firewall-Konfiguration"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Sie haben bereits eine Firewall eingerichtet.\n"
-"Wählen Sie die Schaltfläche „Konfigurieren“,\n"
-"um sie zu löschen oder zu verändern."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Wählen Sie die Schaltfläche „Konfigurieren“,\n"
-"um eine Standard-Firewall einzurichten."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Sprache auswählen"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Installationsart auswählen"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Festplatten suchen"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Maus konfigurieren"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Tastatur auswählen"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sicherheit"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Dateisysteme einrichten"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Partitionen formatieren"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Zu installierende Pakete"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "System installieren"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Benutzer hinzufügen"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Netzwerk konfigurieren"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Dienste konfigurieren"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "BS-Starter installieren"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Startdiskette erstellen"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X konfigurieren"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Systemaktualisierungen"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Installation beenden"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"TinyFirewall Konfigurierer\n"
-"\n"
-"Hiermit konfigurieren Sie eine persönliche Firewall für diesen\n"
-"Mandrake Linux Rechner. Sollten Sie an einer speziellen ausgereiften\n"
-"Firewall-Lösung interessiert sein, schauen Sie sich nach der speziell\n"
-"dafür entwickelten MandrakeSecurity Firewall Distribution um."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Wir fragen Sie nun, welchen Diensten Sie direkten Internetzugang\n"
-"gestatten wollen. Bitte machen Sie sich sorgfältig Gedanken über diese\n"
-"Fragen. Es geht hierbei schließlich um die Sicherheit Ihres Systems!\n"
-"\n"
-"Bitte schotten Sie jeden Dienst, den sie aktuell nicht verwenden, vom \n"
-"Netz ab. Sie können die vorgenommenen Einstellungen mit Hilfe dieses \n"
-"Programms jederzeit wieder ändern!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Betreiben Sie auf Ihrem Rechner einen Web-Server, der im gesamten\n"
-"Internet sichtbar sein soll? Falls der Server nur auf Ihrer Maschine\n"
-"zugreifbar sein soll, können Sie hier getrost NEIN antworten.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Betreiben Sie einen Name-Server auf Ihrem Rechner? Falls Sie keinen\n"
-"Eingerichtet haben, um dem gesamten Internet IP und Bereichsinformationen\n"
-"anzubieten, antworten Sie hier NEIN.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Wollen Sie eingehende Secure Shell (ssh) Verbindungen gestatten?\n"
-"Es handelt sich hierbei um einen Ersatz für Telnet. Falls sie noch\n"
-"Telnet verwenden, sollten Sie definitiv auf dieses Protokoll wechseln.\n"
-"Telnet überträgt Ihre gesamte Kommunikation (also auch Passwörter)\n"
-"UNVERSCHLÜSSELT! Sie bieten damit einem potentiellen Angreife ein\n"
-"leichtes Spiel. Die SSH hingegen verschlüsselt die komplette\n"
-"Kommunikation und warnt sogar falls sie eine Unregelmäßigkeit bemerkt."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Wollen Sie eingehende Telnet-Verbindungen gestatten?\n"
-"Dienst extrem unsicher, wie wir bereits früher erwähnten. Wir empfehlen\n"
-"Ihnen daher nachdrücklich mit NEIN zu antworten und im Bedarfsfall auf\n"
-"die SSH auszuweichen.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Betreiben Sie einen FTP Server der aus dem Internet zugreifbar sein soll?\n"
-"Falls ja, sollten Sie ihn jedoch nur für „anonymen Transfer“ verwenden,\n"
-"da das Protokoll keine Verschlüsselung übertragener Passwörter vorsieht."
-"Verwenden Sie „scp“ aus dem SSH Paket zum verschlüsselten\n"
-"Datentransfer zwischen zwei Rechnern.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Betreiben Sie einen Mail-Server? Falls Sie Ihre Nachrichten mit\n"
-"einem textbasierten E-Mail Programm wie pine oder mutt schreiben\n"
-"ist dies vermutlich der Fall. Andernfalls sollten Sie den Dienst\n"
-"abschalten.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Betreiben Sie einen POP oder IMAP Server? Sie würden damit\n"
-"Postfächer für nicht-web-basierten E-Mail Zugriff über diese\n"
-"Maschine bereitstellen.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Sie scheinen einen 2.2er Kern zu verwenden. Falls Sie Ihre\n"
-"IP-Adresse automatisch im lokalen Netzwerk erhalten sollen,\n"
-"müssen wir dies gestatten. Ist das bei Ihnen der Fall?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Wird die Zeit Ihres Rechners automatisch mit anderen Rechnern\n"
-"synchronisiert? Dies ist häufig ab mittelgroßen UNIX/Linux Betrieben\n"
-"der Fall. Damit wird ein einheitliches Zeitschema, etwa für die\n"
-"Datensicherung zugrunde gelegt. Wenn Sie nicht in einem größeren\n"
-"Betrieb arbeiten oder noch nie etwas zu diesem Thema gehört haben,\n"
-"trifft es für Sie vermutlich nicht zu."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfiguration beendet. Soll ich die Änderungen auf Platte schreiben?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ich kann „%s“ nicht öffnen: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ich kann „%s“ nicht zum Schreiben öffnen: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Nein, ich benötige kein DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Ja, ich benötige DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Nein, ich benötige kein NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Ja, ich benötige NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Nicht speichern"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Speichern und beenden"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Firewall-Konfigurationsassistent"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Nein (Vom externen Netz abschirmen)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Ja (durch die Firewall erlauben)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Bitte warten, Kontrolle der installierten Pakete ..."
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Fehler bein Versuch die gewünschten Pakete (%s und Bastille) zu "
-"installieren!\n"
-"Versuchen Sie es manuell."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Server, Web/FTP"
-
-#
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Netzwerk-Computer (Klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-Server, SMB-Server, Proxy-Server, SSH-Server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome-Arbeitsplatz"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Werkzeuge für Ihren Palm Pilot oder Ihren Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbeitsplatzrechner"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Server, Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domänen- (DNS) und Netzwerk Informationsserver (NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Office-Programme: Textverarbeitung (KWord, Abiword), Tabellenkalkulation "
-"(KSpread, Gnumeric), PDF-Betrachter, usw."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio Programme: MP3- und Midi-Abspieler, Mixer, usw."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Bücher und HOWTOs zu GNU/Linux und Freier Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE-Arbeitsplatz"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, usw."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia / Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Programme für Mail, News, WWW, FTP und Chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Server, Datenbank"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgeSQL oder MySQL Datenbankserver"
-
-#
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Werkzeuge, die die Konfiguration Ihres Rechners erleichtern"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia / Sound"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Werkzeuge"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentation"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsolen-Werkzeuge"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-"Postfix E-Mail-Server und\n"
-"Inn Diskussionsforen-Server"
-
-#
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetrechner"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimediarechner"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfiguration"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Weitere Arbeitsoberflächen (GNOME, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Das K Desktop Environment, die Standard-Arbeitsoberfläche mit einer Sammlung "
-"zugehöriger Programme"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafische Arbeitsoberfläche"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache und Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Werkzeuge zur Erstellung und zum Brennen von CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Büro-Arbeitsplatz"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "GNOME, IceWM, Window Maker, Enlightenment, Fvwm, usw."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Bildverarbeitungsprogramme wie der GIMP"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C und C++ Entwicklung: Bibliotheken, Programme und Include-Dateien"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Netzwerkrechner Server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Spiel-Station"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videoabspieler und Editoren"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia / Grafik"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Spiele: Arcade-, Brett-, Strategiespiele, usw."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Programme zum E-Mail bzw. News lesen und senden (pine, mutt, tin, ...)sowie "
-"zum durchstöbern des WWW"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivierung, Emulation, Überwachung"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanzverwaltung"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Eine grafische Oberfläche mit anwenderfreundlichen Anwendungen und Werkzeugen"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienten für verschiedene Protokolle, u.a. SSH"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet-Gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Sound- und Video-Abspieler/Editoren"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andere grafische Arbeitsoberflächen"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editoren, Shells, Dateiwerkzeuge, Konsolen"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Finanzverwaltungsprogramme, etwa Gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Persönliches Informationsmanagement"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia / CD-Brenner"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Wissenschaftlicher Arbeitsplatzrechner"
diff --git a/perl-install/share/po/el.po b/perl-install/share/po/el.po
deleted file mode 100644
index 1de4183da..000000000
--- a/perl-install/share/po/el.po
+++ /dev/null
@@ -1,13124 +0,0 @@
-# Greek Translation of DrakX.
-# Copyright (c) 1999 MandrakeSoft
-# FIRST AUTHOR Theodore J. Soldatos <theodore@eexi.gr>, 1999-2000.
-# Thanos Kyritsis <djart@hellug.gr>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-08-23 23:59+0300\n"
-"Last-Translator: Thanos Kyritsis <djart@hellug.gr>\n"
-"Language-Team: Greek <nls@tux.hellug.gr>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-7\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "������� ���� ��� ������� ����������"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "����� ��������� Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "������� ���� ��� ������ \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "������� ������ �������"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"�� ������� ��� ����������� ������� ��������� �������.\n"
-"�� ������ �� ������;"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "����� ��������"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "�������� ����� ��������"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "�������� X server (������ ������ ��������)"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "������������ X Window"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "�������� X server (������ ������ ��������)"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "������������ X Window"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "�� ����� XFree ������ �� �����;"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"� ����� �������� ��� ����������� ���������� ������������� �������� ���� \n"
-"�� �� XFree %s. � ����� ��� ������������� ��� �� XFree %s �� ����� ������ �� "
-"������ \n"
-"�������� ���������� ��� ����������� �������."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"� ����� �������� ��� ����������� ���������� ������������� �������� ��� XFree "
-"%s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s �� ���������� ������������� ��������"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"� ����� �������� ��� ����������� ���������� ������������� �������� ��� XFree "
-"%s,\n"
-"�������: ����������� ���������� - ������ �� ������� ��� ���������� ���!"
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s �� ����������� ���������� ������������� ��������"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"� ����� �������� ��� ����������� ���������� ������������� �������� ���� \n"
-"�� �� XFree %s. �������: ����������� ���������� - ������ �� ������� ��� "
-"���������� ���!\n"
-"� ����� ��� ������������� ��� �� XFree %s �� ����� ������ �� ������ �������� "
-"����������\n"
-"��� ����������� �������."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (������ �������� ������������)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "��������� XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "������� ������ ������ ��������"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "��������� X server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "�������� �����"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "�����"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"�� ��� �������� ���������� ����� � ��������� ����������� ���������, ������ "
-"�����\n"
-"��������� �� ��� ����� ����������� �������� � �����, ����� ��� � ���������\n"
-"���������� ���������, � ����� ����� � ��������� �� ��� ����� ������������\n"
-"�� ���������� �������.\n"
-"\n"
-"����� ���� ��������� �� ��� ��������� ���� ������ ��� ������ �� ����������\n"
-"��������� ����� ����� ��� ����� ��� ������ ���: ������� �������� "
-"�����������\n"
-"��� ������ ���. �� ��� ����� ��������, ����� ��� ����������� �������."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "��������� ���������� ���������"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "��������� ����������� ���������"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "� ����� ��� ���� ��������� �����"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "� ����� �������� ��� ���� ��������� �����"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "��� ����� �������� ��������� �����"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "������ �� ���������� ��� ���������;"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "�������: � ������ ����� ���������� �� ���� ��� ����� ��������"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "������ ���������"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"��������� �� �������� ������� �����������"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "���������� ������:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "������ �� %d ������������"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "����� ���� � ����� �������;"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "���������� ������, ��������� �� �������� ������� �����������"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "�������"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "�������� ������� ��� ����� ��������"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "����� ��������: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "����"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "��"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "��������� ������������"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "�������� ����"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "���������"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "���������� �������������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "����� ���������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "������� ���������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "�����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "��������� ���������� ���������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "��������� ����������� ���������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "����� ��������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "����� ��������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "����� ������ ��������: %s kb\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "����� ��������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "�������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "������ XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "������������ ��������� �������� ������������� (X-Window)"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "�� ������ �� ������;"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "������ ������"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "������ ������ ��������"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "������ ��������� X server"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "������ ��������"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "������� �����������"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "��������� �������"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "������"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"��������� ���������� ���������;\n"
-"�� ��������� ��������� �����:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "������� ���������� (X) ���� ��������"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"����� �� ������� �� ������� ��� ���� ���� �� �������� �������� ��\n"
-"������� ���������� (X-Windows).\n"
-"���������� �������� �������� �������� �������������;"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "�������� ��������������� �� %s ��� ������������ ��� �������"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "�������� ������������� ��� ���� ������� Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ������� (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 �������� ������� (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 �������� ������� (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ����������� ������� (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 �������������� ������� (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB � �����������"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 ��� 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 ��� 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Compatible, 1024x768 ��� 87 Hz interlaced (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ��� 87 Hz interlaced, 800x600 ��� 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 ��� 60 Hz, 640x480 ��� 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 ��� 60 Hz, 800x600 ��� 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 ��� 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency ��� ������ �� ����������� ������� 1280x1024 ��� 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency ��� ������ �� ����������� ������� 1280x1024 ��� 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency ��� ������ �� ����������� ������� 1280x1024 ��� 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "����� ��� ������ �� ����������� ������� 1600x1200 ��� 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "����� ��� ������ �� ����������� ������� 1600x1200 ��� 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "������ ������ ��� ���������� ���������"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "������ ������ ��� ������ (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "����������� SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "��� ������ �� ������������� �� ��������� ���������;"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "����������� LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO �� ����� ��������"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO �� ������� �����"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "�������� ��� �� DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "������� �������� ������������ ���������"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Bootloader ��� �����"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "����������� ������������ ���������"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "������� ���������"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (��� ���������� �� ���������� BIOS)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "��������"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "��������"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "������� ������"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "����������� ���� ��� ��������"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "�����������"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "����������� (����)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "���������� �������� ������� �������"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "����������"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "���������� /tmp �� ���� ��������"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "������� ��������� ������ �� ���������� (��� ��������� %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "������������ ��������� profiles"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "�������� ������� ������ �� Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"� ������� ``���������� �������� ������� �������'' ����� ������� ����� "
-"�����������"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "�������� ����������� ����"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "�� ����������� ����� �������"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "������ Init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "������� ������������ Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "����� ������ ��������� ������"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "������������ ��������� ��� CD;"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "������������ OF ���������;"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "��' ������� ����������� �������;"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"�������� �� ��������� ��������.\n"
-"�������� �� ���������� �� ����� � �� �������� ��� ����������."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "��������"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "������������"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "�����������"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "�� ����� ������� ������ �� ����������"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "���� ����������� (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "���� ����������� (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "���� ����������� (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "�������"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "���������"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "��������"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "������� ��' �������"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-�������"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "�����Video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "�������� ��������"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "��� ����������� ����� ��������"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "������ �� ����� ��� ��������� swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "���� � �������� ��������������� ���"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "����� %s %s ������������"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "����� �����;"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "����� ������� ����������� %s;"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "���"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "���"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "������� ����������� ������"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "����������� ������ ��� %s ����� %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "����� %s ����� �� ��������;"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"�� ������� �����������, � %s ������ ���������� �������� ����������� ���\n"
-"�� ������������ �����, ���' ��� ��� ������� ���������� ��� ����� �����.\n"
-"�� ������ �� ������ �������� �������� � �� ������� ��� ����� �� ��������\n"
-"�� ����� ��� ��� ��� ����������� ��� ����������; � ������� ���� ����\n"
-"���������� ������� ��� ����������, ���� ��� �� ���������� �����."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "�������� �������"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "������������� ����������"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"�������� ���� �� ������ ��� ����������� ��� ��� ����� %s.\n"
-"�� ���������� ����� ��� ����� ``�����=���� �����2=����2 ...''.\n"
-"��� ����������, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "���������� ������"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"� ������� ��� ������ %s �������.\n"
-"������ �� ���������� ���� �� ������������ �����������;"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(�� %s ���� ��� ���������)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "�� ����������� ����� ���� ����"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "�������� �������� ������ �����"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"�� ������ ����� ������ �� �������� ���� ���� ��������, ��������, `-' ��� `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "���� �� ������ ����� ������� ���"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "�������� ������"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"�������� ������\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "������� ������"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "���������� �����"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "������ �����"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "������ (shell)"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "���������"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "�������� ������� (Autologin)"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"����� �� ������� �� ������� ��� ���� ���� �� ��������� �������� ����\n"
-"��� �������� �� ���� ������������ ������.\n"
-"��� ��� ������ �� ��������� ����, ������� ��� ������ ��������."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "�������� ��� ��' ������� ������:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "�������� ��� ����������� ��������� ��� ������ �� ���������������"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "�������� �������� ��� ������."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"�������� �� ��������� ��� ����� ������� ��� �� ����� ���������� ���� �� "
-"����� ��� ������������"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "���"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "�������� ������"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "�������������"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "�������� CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"���� �� ������ ������ �� ������������\n"
-"����� �������� ��� ������ �� �� ������������;"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "�������"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "����� ������ ����� Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "�����"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "������"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "�����"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "�����"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "���������"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"���� �� ������� ������ �� �������������� �� �������. ����� �� ������� ���\n"
-"��� ������������, ���� ���� ���������. ��� ������ �� �������������� �� "
-"�������\n"
-"����������� ��� Internet � LAN. ��� �������� ������ �������."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"���� �������� ������ �������, ���� � ����� ��� ���������� �� ������ \n"
-"��� ����������."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"���� ����� �� ����������� ������� ��������� ��� ��� ������� ��� �� ��������\n"
-"�� ������� ��� Internet. �������� ���� ������� ���������."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"�� ���� �� ������� ��������� ����� ������ � ����� ��� ���������� ��� \n"
-"Internet �� �����������. � �������� ����� ������ ����� ���� �� �������\n"
-"����������� ��������� ��� ������� �������."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"�������� �������� 4, �� �� ������� ������� �������. �������� \n"
-"��� ������� ������."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "�������� ������� ���������"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "������� �������� ���������"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "��������� X server"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"KALOS HRTHATE STON EPILOGEA LEITOURGIKOU SYSTHMATOS %s!\n"
-"\n"
-"EPILEXTE LEITORGIKO SYSTHMA APO TON PARAPANO KATALOGO \n"
-"H PERIMENETE %d DEUTEROLEPTA GIA THN AYTOMATH EPILOGH.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "��� ������� ������� ����� ��� /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "��� ������ �� ������������� �� ��������� ���������;"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "��� ������� ������� ��������� �����.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Boot ����� �������"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_������"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/������/�_�����"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Categorizing �����"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle �����"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "����������� �����"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "����������� Gtk+ �����"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "�������� ��� Aurora ���� ��� �������� ��� ����������"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "���������� Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "���������� Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"�������������� ��� %s �� Boot Manager.\n"
-"����� ���� ��� ������� ��� �� ���������� ��� ����� ������������."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "�������"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "��������� ����������"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "������� ��� X-Window ���� ��� �������� ��� ����������"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "���, ��� ������� �������� login"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "���, ������� �������� login �� ���� (user, desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "�������� ���������� ��� /etc/inittab ��� ��������: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d �����"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 �����"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d ������������"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "��� ����� �� �������� �����������"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"�������� �� ��������� ��� ����� ������� ��� �� ����� ���������� ���� �� "
-"����� ��� ������������"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "�������"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "�������"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "���������"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "��������"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "���������"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "��������"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "�������"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "��������"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "�������� ����� ����� ��� ��������� ��������� ��� ��������� ���"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "�������� ����������!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"��� ��������� �� ��������������� �� aboot, �������� �� ������� �������� ���� "
-"2048 ������ ����� �������)\n"
-"���� ���� ��� ������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "�����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "�������� �����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"����� ��� ������ FAT ���������\n"
-"(������� ���������������� ��� Dos � Windows).\n"
-"������� �� �������� �� ������� ��� �����\n"
-"(�������� ���, ���� �������� \"������ ��������\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "�������� ����� ���� �� ��� ���������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "������������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "������� �������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "�����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "����� ���������� �������:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "����������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "�����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "�������������� ``%s'' ��� ���� ���"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "��������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "����� ����� ``����������''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"���� ��� ������ ����� ���� ��������� %s, ��� �� �������� �� ����� ��� "
-"��������� �� ������"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "�������� �����"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "���������� ���� ����������"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "���������� �� ����������� ����� �����������"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "���������� �� �������� ����� �����������"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "������� ���������� ������"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "�� ��������;"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "������ ����� ����������"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "������ ����� ���������� ��� ������ �����������;"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "������ �� ���������� ��� ���������;"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "�������� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "���������� ����"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "���������� ������� ������"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "���� �� ����������� ����������� ����� �� �����"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "��� ����� �� �������� �����������"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"��� �� ���������� �����������, �������� ��������� ��� ���� ������ ����� "
-"������ � �������� ����������� ����������"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "���������� ������ �����������"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "������� ����������� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "������� ����������� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "������� ����������� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "�������� ������� ����������� ������� �����������"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "�������� ������"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"� ��������� ������� ����������� ���� ����������� �������\n"
-"�� ��������;"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "�������������"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"�������� ��� �������� ���� ����� ���������\n"
-"��� �� �������� �� ���� �� �������� �� ������"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "���������� �������� ������ �����������"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "������� �����������"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "������ ��������"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "��������"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "������ ��������"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "����������"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "�����������"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "�������"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "�������� ��� RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "�������� ��� LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "����������"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "�������� ��� �� RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "�������� ��� �� LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "����������� RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "����� ��� loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "���������� ���� ����������"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "���� ���� �����: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "������� �� MB"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "����� ���������� �������: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "������ ��������: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "���������: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "����������� ������� loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "������ ����� ����������"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "���� ������ ������� ���������;"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "������ ��� ext2 �� ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "��� ������ �� ��������� �� ������ loopback %s;"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "��� ������ �� ��������� ��� ������� %s;"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"��� ����� �� �������� �� ������ �������� ����� ���� � ��������� "
-"���������������\n"
-"��� loopback. ��������� ����� �� loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "����������� fat filesystem bounds"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "�������� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "����� � ����� ���������� ��� ������ �' ������� �������."
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"������ �� ����� ��������� ��������� ���� ��� ��������� �� ���� ��� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"���� ��� ������ �������� ���� ��������� %s, ��� �� �������� �� ����� ��� "
-"��������� �� ������"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "�������� �� ��� �������"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "������� �� MB"
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "�� ����� ����� ������ �� �������������;"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "������"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "�� ����� ����� ������ �� �������������;"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "���������� �� �������"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "���������� ���������� �� �������..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "�������� ��� ������� RAID ��� ����� �� ����� � ��������"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "���"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "�������� ��� ������� LVM ��� ����� �� ����� � ��������"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "����� LVM;"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "���� � ��������� ��� ������ �� �������������� ��� loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "����� ������� loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "���������� �����"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "�� ������ ���������������� ���, �������� ��� ����"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "�� ������ ������� ���. �� �� �������������;"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "���������� ������"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "�������"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "�������"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "������� chunk"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "�������: ���� � ���������� ����� ����������."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "�� ����� partitioning;"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"��������, ���� ��� ����� �� ����������� ��� �������� /boot �� �������� "
-"���������� ��� 1024.\n"
-"���� �������������� LILO ��� ��� �� ��������, ���� ��� ��������������LILO "
-"��� ��� ���������� �� /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"� ��������� ��� ��������� �� root (/) ��������� ���� ��� �������� 1024 ���\n"
-"��� ����� ��������� /boot.\n"
-"�� ��������� �� ��������������� LILO, ��������� ��� ��������� /boot."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"��������� ��� software RAID ��������� �� root (/).\n"
-"������ ��������� ��������� ��� ������ �� �� ��������� ���� ����� ��� "
-"��������� /boot.\n"
-"��������� ������ �� ���������� ��� ��������� /boot."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "� ������� ����������� ��� ������ %s �� ����������� ���� �����!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "���������� ������������ ��� �� ����������� �� �������"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"���� ��� ����������� ��� ���������� %s, ��� �� �������� �� ����� ��� "
-"��������� �� ������"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "�����������"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "����������� ������� loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "����������� ���������� %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "�������� mkraid"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "��� ������� ������� ��������� ����� ��� ���������� ���� �����������"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "��� ������� ������� ��������� ����� ��� ���������� ���� �����������"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "�������: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "�������: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "������ DOS ������ ������: %s \n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "�����: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "�����: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "����: ������ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "�������: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ������"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "��������� %d ��� ��������� %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "��������������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "�������������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "������������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "������ loopback: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"��������� ��������� �� �������\n"
-"    (��� MS-DOS, ��� ��� lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "������� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "������� chunk %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "������ RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "����� ������� loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"�� ����������� �����, ���� � ��������� �� �����\n"
-"��� ��������� ������, �� ������ ����������\n"
-"�� ��� ������� �����.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"���� ����� ������ Bootstrap\n"
-"��������� ���\n"
-"dual-booting �� ������� ���.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "�������: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "���������: %s ���������, %s �������, %s ������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "�����������: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "������ LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "����� ������ �����������: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "��� bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "��������: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "����� ���������� �������: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"���� �� ����������� ����� ���� ���� (������ �� ����� ����������� %d "
-"���������� �����)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "�� ����������� ����� �������"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "������ ����� ����������"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "�������� ����� ���� �� ��� ���������"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "������������ DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ����������� ��� %s �������"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "��� ���� ��� �� ����������� �� %s �� ���� %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "�� fsck ������� �� ������ ������ %d � ���� %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "������ ���� ��� ���������� ��� %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "����"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "������������"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-"��� �������� �� ��������������� �� JFS ��� ����������� ���������� ��� 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-"��� �������� �� ��������������� �� ReiserFS ��� ����������� ���������� ��� "
-"32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "�� ������ �������� ������ �� �������� �� /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "������� ��� ��������� �� ������ �������� %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "��� �������� �� ��������������� ��� ��������� LVM ��� ���������� %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-"����� � ��������� ������ �� ���������� ��� ������ ������� ������� (root)"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"���������� ��� ���������� ������� ������� (ext2, reiserfs) ��� ���� �� "
-"������ ��������\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "��� �������� �� ��������������� ��� ��������� LVM ��� ���������� %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-"��� ������� ������� ��������� ����� ��� �������� ���������� ���� �����������"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "������ ���� �� ������� ��� %s ��� �������: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"���������� ������ - ��� �������� �������� ���� ������ �� ����� ������� "
-"���������� ���� ���������� �������. �������� ������� �� ����� ��� ������ "
-"����� ����� ��� �����������"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "��� ������� ����� ���������!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"�������� ������� ���� �������� �� ��� ����������� Linux ��� ������������ "
-"���� \n"
-"����� ���. �������� �� ��������� ��� ��������� ��������, ����� ����� ��� \n"
-"����������� �����. ��� �������� ����� ��� ��������, ������ �� ����� "
-"�����������\n"
-"��� ������ ��������� (root, \"/\"). ��� ��������� ��� ���� ����� ��������� "
-"�����\n"
-"��� �� ����� ���� ��� ����������� ����������. ��� ������ �� ����������� �� "
-"��������\n"
-"��� �� ��������� ���������, ������ �� ��������� ��� ��������� ��� \"/home"
-"\" (�������\n"
-"���� �� ����� �������� ��� ��� Linux ��������� ���������).\n"
-"\n"
-"\n"
-"������������, ���� ��������� ���������� ��: \"�����\", \"������������\".\n"
-"\n"
-"\n"
-"�� ����� �������� �� ����: ����� ������, ������� ������, ������� "
-"���������� \n"
-"��� ����������, \"hda1\").\n"
-"\n"
-"\n"
-"� ����� ����� \"hd\" ��� ��������� ��� ����� IDE ��� \"sd\" ��� SCSI �����.\n"
-"\n"
-"\n"
-"� ������� ������ ����� ����� ��� ������ ���� �� \"hd\" � \"sd\". ��� ���� "
-"IDE \n"
-"�������: \n"
-"\n"
-"   * \"a\" ����� � master ������ ���� ����� ������� IDE,\n"
-"\n"
-"   * \"b\" ����� � slave ������ ���� ����� ������� IDE,\n"
-"\n"
-"   * \"c\" ����� � master ������ ���� ������� ������� IDE,\n"
-"\n"
-"   * \"d\" ����� � slave ������ ���� ������� ������� IDE.\n"
-"\n"
-"\n"
-"��� ������� SCSI, \"a\" ����� � ������ ������, \"b\" ����� � �������� ������ "
-"���..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"�������� ���� �� ��������� ����� ��������� ������ �� �������� ���� ��� \n"
-"��������.\n"
-"\n"
-"\n"
-"��� ������������ ��� ������ ��� ��������� ���� �� ��� ��� �����, \n"
-"�� ���������� ��� ��������� �������� ��� �� ������ ��� ���� ���.\n"
-"\n"
-"\n"
-"�������� ���� �� ���� ��� ��������� �� ��������������� ��� ������� ��� \n"
-"�����������. ��� �� ������ �� ���������� ��������� ��� ��� ����������, \n"
-"����� ��������� ��������� ����������� ��������� ��������� ��� �������� \n"
-"�� �����������.\n"
-"������, �������� ���� ��� ��������� ��� ���������� ����������."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"�� ���� �� ������, ������ �� ����������� ��� �� ������������� �� GNU/Linux\n"
-"���� ������ ��� �����. ��� ����� ������ � ��� ��� ���� ����������� "
-"������������\n"
-"���� ��� ����, �� ��������� �� ��� �����������, ������ �� ������ ���� ������ "
-"����������\n"
-"��� ������ �� ������������, ���� �� ������������� ���� ��� ��� ����������� "
-"��� Mandrake Linux.\n"
-"\n"
-"\n"
-"������ � ��������� ����� ������� ��� �� ����������� �������, ������ �� ����� "
-"������� ��� \n"
-"�������� ��� ���� ������� ������.\n"
-"���� �� ��������� ��������� ��� ����������. ���� ��������, �������� "
-"�������������� �� \n"
-"���������� ������ ��� ��� ���������.\n"
-"\n"
-"\n"
-"�� ����������� ����������� ��� �����������. ��� ��� �� ����������� ������� "
-"��� ���� ��� ��� \n"
-"��� �������� ����� (swap).\n"
-"\n"
-"\n"
-"��� �������� ��� ����������� ��� ����������� ����������� � ��� ���� "
-"��������, �� ���������\n"
-"����� �� ��������� �� ����� ��� ����� �� ������������� �� Linux ���.\n"
-"\n"
-"\n"
-"��� ��� �������� �����������, ������ �� ��� ������������� �� �� �������� "
-"��������. ������� �� \n"
-"��� ��������� ��� ������ ���, �������� �������� ������:\n"
-"\n"
-"* ����� ���������� �����������: �������� ��� � ������������ ����������� "
-"Linux ��� ������� ���.\n"
-"  ��� ������ �� ��� ���������, �������� ����� ��� �������.\n"
-"\n"
-"\n"
-"* �������� ��������� ��� ������: ��� ������ �� ���������� ��� �� �������� "
-"��� ���� ��� ����������\n"
-"  ����������� ��� �� �� �������������� �� �� ��� ��� Mandrake Linux �������, "
-"�������� ����� ��� \n"
-"  �������. �������: ��� ������� ������ �� ������������ ��� ����������\n"
-"  �� �������� ����� ��������! ��� �� �������� �� ������������!\n"
-"\n"
-"\n"
-"* ����� ��������� ����� ���� ��������� ��� Windows: ��� ����� ������������� "
-"�� Microsoft Windows\n"
-"  ��� ������������� ��� ��� ���� ��� ������, ������ �� �������������� "
-"�������� ���� ��� �� Linux.\n"
-"  ��� �� ����� ����, �������� ���� �� ���������� ��� ��������� ��� Windows "
-"��� ��� �� �������� ����\n"
-"  (��� \"�������� ��������� ��� ������\" � \"�������\") � �� ������������ "
-"��� ��������� ��� Windows.\n"
-"  � ���������� ������ �� ����� ����� ������� ���������. ���� � ���� "
-"���������� ��� ������ �� ��������������\n"
-"  Microsoft Windows ��� Mandrake Linux ���� ���� ����������.\n"
-"\n"
-"\n"
-"  ���� ����������� �� ������������ ��� �����, ������ �� ���������� ��� ���� "
-"��� ����� ��� ����������\n"
-"  �� ����� �������� ���� ��������� ��� �� Windows ��� ���������� ��������� � "
-"����������� ���������.\n"
-"\n"
-"\n"
-"* �������: ��� ������ �� ����������� ����� ��� ����� ���, ����� ��������� "
-"���������. ����� ��� \n"
-"  ������� �� ������ ����������� ���� ����������, ��� ��� �������� �� ������ "
-"��� �� �������� ���\n"
-"  ��� ������ ������ �����. ����������� ��� ������ �� ������ ������ "
-"�����������."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"�� ���� ����������� ������ �� ������������ (������ �� ������������ ��� "
-"�������\n"
-"�������) ������ ���������������.\n"
-"\n"
-"\n"
-"�������� ������ �� ��������� ������� ������������� ����������� ��� �� "
-"���������� \n"
-"�� �������� ����. ��� ������ ���� ������, �������� �������� ��� ����������� "
-"��� \n"
-"������ �� ���������.\n"
-"\n"
-"\n"
-"��������� ��� ��� ����� ���������� �� ��������� ���� ��� ������������� "
-"�����������.\n"
-"������ �� ��������� ��� ����������� ��� ��������� �� ����������� ������� "
-"(���� �� \n"
-"\"/\", \"/usr\" ��� \"/var\"), ���� ��� ���������� �� ��������� ����������� "
-"��� ��������� \n"
-"�������� ��� ������ �� ��������� (������� � \"/home\").\n"
-"\n"
-"\n"
-"�������� �� ����� ����������� ����� ���� ��� ����� ��� ���������� ��� �� "
-"�������� \n"
-"���� ����������� ����� �� ������ ����������.\n"
-"\n"
-"\n"
-"������� \"OK\" ���� ����� ������� �� ���������� ��� ����������.\n"
-"\n"
-"\n"
-"������� \"�������\" ��� ������ �� �������� ��� �������� ��� ��� �� "
-"��������������� \n"
-"����� ����������� ��� ��� ����������� ��� Mandrake Linux."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"�� ��� ��� ����������� ������� Mandrake Linux ������������.\n"
-"���� � ���������� �� ����� ������ ���, ������� �� �� ������� \n"
-"��� ����������� ��� ��������� ��� ��� �������� ��� ���������� ���.\n"
-"\n"
-"\n"
-"�������� ���������� �����������."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"�� ���� �� ������, �� ��������� �� ��������� �� ����� ����������� �� "
-"������������� \n"
-"�� Mandrake Linux. ��� ����������� �����������, ��� ���������� ����������� � "
-"��� \n"
-"���� ��������, �������� �� ��� ���������������. ������, �� ������ �� "
-"������� \n"
-"���� �����������.\n"
-"\n"
-"\n"
-"��� �� ������������� �����������, ������ ����� �� ��������� ������ �����, "
-"��������\n"
-"���� �� �� ������� ��� \"hda\" ���� ����� IDE �����, \"hdb\" ���� ������� "
-"IDE, \"sda\"\n"
-"���� ����� SCSI ����� ���\n"
-"\n"
-"\n"
-"��� �� ����������� ����� ���, �������� �� ���������:\n"
-"\n"
-"   * ������ ��������: ���� � ������� ��������� ���� ��� ����������� ��� \n"
-"     ����������� ������.\n"
-"\n"
-"\n"
-"   * �������� �������: ���� � ������� ���������� �������� ����������� \n"
-"     ext2 ��� swap ���� �������� ���� ��� ������.\n"
-"\n"
-"\n"
-"   * ������� ������ �����������: ��� � ������� ����������� ����� "
-"�������������,\n"
-"     �������� �� ������������ �� ��� �����������. �������� �� ����� "
-"�����������\n"
-"     ��� �� ������� ��� ������ �� ��������.\n"
-"\n"
-"\n"
-"   * �������: ��� �� ��������� �,�� ����� �����.\n"
-"\n"
-"\n"
-"   * ������������: ��� �� ��������� �,�� ����� ����� ��� �� ������������� "
-"��� \n"
-"     ������ ��� ������ �����������.\n"
-"\n"
-"\n"
-"   * �����: ��� ������ �� ������������� ������� �������� �� �����������. "
-"����������� \n"
-"     ������� ��� ��� ����� ���� ����� ��� �����������.\n"
-"\n"
-"\n"
-"   * ������������ ��� ��������: ��� ������ ����������� ��� ������ "
-"����������� �� ��������\n"
-"     �� ������ ����������� �����������, �������� �� ��� �����������. \n"
-"\n"
-"\n"
-"   * ���������� �� ��������: ��� �� ������ ��� ������ ����������� �� "
-"��������, ���� �� \n"
-"     �������� �� ��� �����������. � ����� ����� ��� �������� ����������.\n"
-"\n"
-"\n"
-"   * �����: ���� ���������� ��� ���������, �������� ���� ��� �� ������ ��� "
-"������� �������.\n"
-"\n"
-"\n"
-"������������, �������� �� ��������� ���� ��� �������� ��� ���� "
-"�������������: \n"
-"������������� ���� ����������� ��������������� �� ������� Tab ��� �� "
-"�������.\n"
-"\n"
-"\n"
-"���� ����� �������� ��� ���������, �������� �� ��������:\n"
-"\n"
-"           * Ctrl-c ��� ���������� ���������� (���� ����� �������� ����� "
-"����)\n"
-"\n"
-"           * Ctrl-d ��� �������� ����������\n"
-"\n"
-"           * Ctrl-m ��� ������ ������� ��������           \n"
-"\n"
-"           \n"
-"��� ������ ����������� �� ��� PPC ��������, �� ������ �� ������������� ��� "
-"����� HFS 'bootstrap' ��������� ����������� 1�� ��� �����\n"
-"��� ��� yaboot bootloader. ��� ��������� �� ������ ��� ��������� ����������, "
-"�.�. 50��, ���� ��� ������ ������� ��� ���������� \n"
-"���� ������ ��� ramdisk image ��� ��������� �����������."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"������������ ��� ��� ����������� Windows �������� ���� ����� ���. �������� \n"
-"�������� ���� ������ �� ������������ ��� �� ������������� �� Mandrake "
-"Linux.\n"
-"\n"
-"\n"
-"������������, ���� ��������� ���������� ��: \"����� Linux\", \"����� Windows"
-"\", \"������������\".\n"
-"\n"
-"\n"
-"�� ����� Linux �������� �� ����: ����� ������, ������� ������, ������� "
-"���������� \n"
-"��� ����������, \"hda1\").\n"
-"\n"
-"\n"
-"� ����� ����� \"hd\" ��� ��������� ��� ����� IDE ��� \"sd\" ��� SCSI �����.\n"
-"\n"
-"\n"
-"� ������� ������ ����� ����� ��� ������ ���� �� \"hd\" � \"sd\". ��� ���� "
-"IDE \n"
-"�������: \n"
-"\n"
-"   * \"a\" ����� � master ������ ���� ����� ������� IDE,\n"
-"\n"
-"   * \"b\" ����� � slave ������ ���� ����� ������� IDE,\n"
-"\n"
-"   * \"c\" ����� � master ������ ���� ������� ������� IDE,\n"
-"\n"
-"   * \"d\" ����� � slave ������ ���� ������� ������� IDE.\n"
-"\n"
-"\n"
-"��� ������� SCSI, \"a\" ����� � ������ ������, \"b\" ����� � �������� ������ "
-"���...\n"
-"\n"
-"\n"
-"�� ����� Windows ����� �� ������ ��� ���������� ���� �������� ��� �� "
-"Windows\n"
-"(� ������ ������ � ��������� ������� \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "�������� ����������. ���� � ���������� ������ �� ����� ������ �����."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"�������� �������� \"�����������\" ��� ��� ������� ������������� ���������� "
-"������ ��� Mandrake Linux\n"
-"� ��� ������ �� ��������������� ����������� ��� ���� ����������� ���������.\n"
-"\n"
-"\n"
-"�������� \"����������\" ��� ������ �� ������������ ��� ������������ "
-"����������� ��� Mandrake Linux\n"
-"\n"
-"\n"
-"������� �� ��� ������� ��� ��� GNU/Linux, �������� �� ��������� ��� ��� �� "
-"�������� ������� ������������\n"
-"� ����������� ��� Mandrake Linux:\n"
-"\n"
-"* �����������: ��� ��� ����� ���������������� ���� ��� GNU/Linux �������. � "
-"����������� �� ����� \n"
-"  ���� ������ ��� �� ��� ������� �� ���������� ����� ���������.\n"
-"\n"
-"\n"
-"* �������������: ��� ����� ������������� �� �� GNU/Linux, �������� �� "
-"��������� ��� ������ �����\n"
-"  (������������, ������� ��������) ��� ���������� ���. �� ��������� �� "
-"���������� �� ������������\n"
-"  ���������, ����� �� ������ �� ����� ������� ������� ������� ������� �� ��� "
-"���������� ��� GNU/Linux.\n"
-"\n"
-"\n"
-"* �������: ��� ����� �������� �� �� GNU/Linux. ���� ��� ��������, �������� "
-"�� ��������� ��� ������\n"
-"  ����� ��� ����������. �� ��������� ������ �� ������������ �� ������� ���� "
-"������� ��� ����������,\n"
-"  ���� �� ��������� �� ���������� �� �������������� ��������� ��� "
-"������������ �������������� �������.\n"
-"  ����������� ��� ������ �� ������ ������ ��������� ����� ��� �����������."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"�������� �������� ��� ��������� ����. ��� ����������,\n"
-"� COM1 ��� Windows ���������� ttyS0 ��� GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"�� LILO ��� �� Grub ����� ����������� ���������: ������� �� ���������� \n"
-"�� GNU/Linux � ����������� ���� ����������� ������� ��� ������� ���. "
-"��������, \n"
-"�� �������� ����������� ��������������� ��� ����������� �����. ��� ���� "
-"��� \n"
-"������, �������� �� ���������� �������� �������� �� ����� ��� �����. \n"
-"�������� �� ��������� ��� ������ �����������.\n"
-"\n"
-"�������� ������ �� ����������� ��� �������� �� ���� ����������� ��������� "
-"����������\n"
-"��� ����������� ��������. �� ����� ���� ��� ���������, �� ����������� "
-"�������� ���������\n"
-"��� �� �� ���������������!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"������ �� ������������� ��� ������ �� ������������� �� \n"
-"����������� ��� ����� ����������� ��� ��� �������� ��� \n"
-"GNU/Linux.\n"
-"\n"
-"\n"
-"����� ��� �� ������ ���� ���� �� ������, �������� \"������ ������\n"
-"��� ������ (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"�� DrakX �� ����������� �� ��������� ������������ SCSI ����� PCI.\n"
-"��� �� DrakX ��������� ���� ����������� ��� ����� ��� �� ��� "
-"��������������,\n"
-"�� ������������ �������� ��� ��������� �����\n"
-"\n"
-"\n"
-"��� ����� ����������� SCSI ����� ISA, ������� �� ������������ PCI "
-"����������� \n"
-"� ��� ����� ������� ����������� SCSI, �� DrakX �� ��� ������� ��� ����� "
-"������� \n"
-"����������� SCSI ��� ������� ���. ��� ��� �����, ������� ����� '���'. ��� "
-"��������\n"
-"'���', �� ��� ������� �� ��������� ��� ���� ��� ��� ���� ��������.\n"
-"\n"
-"\n"
-"��� ��������� �����������, �� DrakX �� ��� ������� ��� ������ �� ������� "
-"��������.\n"
-"�������, ��������� �� DrakX �� �������� �������� ��� �����������, ��� �� "
-"����� ��������.\n"
-"\n"
-"\n"
-"�� �������� ���������, �� ������ �� ������ �������� ��� ��� �����. \n"
-"�������������� ��� ����� ������������ ��� �� ��� �� ������ ����� ��� \n"
-"����������� ��� ��� ����������� ��� Windows (�� �������), ��� ��� "
-"����������\n"
-"��� ������ � ��� ��� ���������� ��� ������������ (�� ����� �������� ��� "
-"Internet)."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"�������� ��� ����� ��� ������ �� ���������� ��� �� ������������� \n"
-"��� ��� ��������� Mandrake Linux. �������: ��� �� �������� �� ����������\n"
-"��� �� ����� ������� � ��������� ����."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"������� \"OK\" ��� ������ �� ���������� ��� �� �������� ��� ��� \n"
-"����������� �� ����� ��� �����. �������, ���� ��� ���� ��� �� �������� \n"
-"�� ����������� ����������� �������� ��� ���������� ���� �� ������ ���� \n"
-"�����, ������������������� ��� ������������ ��������� ��� �� Windows.\n"
-"\n"
-"\n"
-"������� \"�������\" ��� �� ��������� ����� ��� ���������� ����� �� ������ \n"
-"�������� ��� ����������� ��� ���������� ���� �����."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"����� �������� ���� �������� ������������: %s\n"
-"\n"
-"\n"
-"����� �� ������������ ��������������� ��' �������. ��� ����� ������ ������ "
-"����������\n"
-"���������, ���� ������ �� ������� ������ ���������. �� ����� ��� ���������, "
-"������ �� ������������\n"
-"�� ����������� �������.\n"
-"\n"
-"\n"
-"������ �� ������������� ������ ���� ������������;\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "��� ����� �� ������������� broadcast ����� NIS domain"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "�������� ��� FAT ������������� �������� ���� ����� %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "���� � �������� ��� ����� ������������� FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"��� �� ��������������� ����� ��� ������������ ������� �������, ��������� ��� "
-"����������� �� ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "������ ���� ��� �������� ��� ������� %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"��� ����� ��� ������ ��� ���������� ``�����������'' ������� ��� �� "
-"������������.\n"
-"�������� �� ������ �������� ����������� ���: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"������ �� ����� ��� ������ ���������.\n"
-"����o������� � �������� ��� ���������.\n"
-"���� ������ �� ������ �������� �� `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "������ �� ����� ��� ��������� swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"��� ����� ������ ��������� swap\n"
-"\n"
-"�� ��������;"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "������ �� ����� ��� ��������� FAT mounted ��� /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "����� ��������� �����"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "��� ������� ������� ��������� ����� ��� ���������� ���� �����������"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "����� ���������� �����������"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "��� �������� ����������� ���� �����"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "����� ���������� Windows ��� loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "���� ��������� ������ �� ��������������� ��� �� Linux4Win;"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "�������� �� ������"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "������� ������� ���������� ���������� �� MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "������� ���������� swap �� MB"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "����� ��� ��������� ����� ���� ��������� ��� Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "�� �� ���� ���������� ������ �� �������� �������;"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "����������� ����� ���������� ������� Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"��� ����� �� ������ ������� ���� ��������� FAT, \n"
-"���������� �� �������� �����: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"� ��������� ��� Windows ����� ���� ����������������, �������� ������ ����� "
-"�� ``defrag'' "
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"�������!\n"
-"\n"
-"�� DrakX ������ ���� �� ������� �� ������� ��� ���������� ��� Windows.\n"
-"� ���������� ���� ���������� ���������. ��� ��� �� ����� ����� ���,\n"
-"�� ������ �� �������� ��� ��������� �� ������ ������� ��������� (��\n"
-"scandisk) ��� ���� ��������� �� ��� ���������������������� (defragment).\n"
-"���� �� ������ �� ��������� ��������� ��������� ��� ��������� ���.\n"
-"��� ����� ��������, ������� Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "�� ���� ������ �� ��������� ��� �� windows ���"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "��������� %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "������ �������� FAT �������: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"��� �������� FAT ����������� ��� ������ �������� � ��� ����� �� loopback (� "
-"��� ������� ������� �����)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "�������� ��������� ��� ������"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "�������� Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"����� ������������� ��� ���� �������, �� ����� ������ �� ������������� �� "
-"Linux;"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"���� �� ���������� ����������� ��� �� �������� ���� ���� ����� %s �� ������"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "�������������� ����������� ������"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "����� fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"�������� ���� �� ����������� ��� ����� %s\n"
-"���� ����������, ��� �������� �� ������������ �������� `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "��� ����� ������ �������� ���� ���� ��������� ��� Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "��� ����� �� ��� ������ ���� ��� �����������"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "�� DrakX ����� ��� �������� ������:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "� ��������� �������: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "�������� �������"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "������� ����������� �������."
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"���������� ������ ��� ��� ���� ��� �� �� ��������.\n"
-"��� ������ � ��� ��� ���������� ��� ������������ (�� ����� �������� ��� "
-"Internet).��������� �� ����� ��� ������."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "����� ������ �������� %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"������ ��������� ������ ��� ������������� �����.\n"
-"� ������ CD-ROM � �� CD-ROM ����� ������������.\n"
-"������� �� CD-ROM �� ��� ���� ������� ��������������� ��� ������ \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "����� ������ ��� %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "��� ������� ���������� ������ ���������"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "���� `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"�� ������� ��� ��� ���� �������� ������. ������ �� �������������� "
-"����������\n"
-"���� ����������� ��� Mandrake Linux. ��� ������ ����, �������� �� ���������� "
-"����������� ��������.\n"
-"������� F1 ���� ��� �������� ��� CDROM, ���� ������ `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "����� ������������"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "�������� �������� ��� �������� �����������"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "�� �������� ������� ��� ������ ��� ��������� ����� ������� %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"��� ������ �� ������������� ��������,\n"
-"�������� �� ������� ��� ������� ��� ������ �� �������������.\n"
-"\n"
-"��� ������ ������� �� ������������ ���� �� ��� ��������� ������.\n"
-"��� ������� 100% �� ������������ ��� �� ���������� ������."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"����� ��� ����� ��� ���� ���� ��� �� %d%% ����� ��� �������.\n"
-"\n"
-"��� ������ �� ������������� �������� ��� ����,\n"
-"�������� �� ������� ��� ������� ��� ������ �� �������������.\n"
-"��� ������ ������� �� ������������ ���� �� ��� ��������� ������.\n"
-"��� ������� %d%% �� ������������ ��� ����������� �������."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "�� ��������� �� ������ �������������� ������� ��� ������� ����."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "������� ������� ���� �����������"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "������� ������ �������"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "������� ���������� �������"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "�������� �������: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "����� ������"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "�����: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "������: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "�������: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "�������: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"��� �������� �� ��������� ���� �� ������ ����� ��� ������� ������� �����"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "�� ������������� �� �������� ������"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "�� ���������� �� �������� ������ "
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "��� �������� �� ���������/������������ ���� �� ������"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "���� ����� ����������� ������, ��� ������ �� �����������"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "��� �������� �� ������������ ���� �� ������. ����� ��� �������������"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"���� �� ������ ������ �� ������������\n"
-"����� �������� ��� ������ �� �� ������������;"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "��� �������� �� ������������ ���� �� ������. ������ �� ������������"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "�������� ������� ����������� �������"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "�����������"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "�������/���������� �� ��������"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "�������� ����������� �������"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "�������� �����������"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "�������� �� ������ ��� ������ �� �������������"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "�����������"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "��������"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "���������� ������ "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "�������� ����������, ������������ ������������"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ������"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "����������� ������� %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "�������"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "������"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"������ Cd-Rom!\n"
-"\n"
-"�������� �������� �� Cd-Rom �� ����� \"%s\" ���� ����� ��� ��� ������� ��.\n"
-"��� ��� �� �����, ������� ������� ��� ������� ������������ ��� ���� �� CdRom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "�� ��������;"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "���������� ������ ���� ��� ���������� ��� �������:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "���������� ������ ���� ��� ����������� ��� �������:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"�������������\n"
-"\n"
-"�������� �������� ���������� ���� ����� ��������. ��� ���������� �� \n"
-"����������� �������, ��� ��� ����������� �� ������������� �� ������� ���� "
-"CD. ������� \n"
-"'�������' ��� �� ���������� ��� ����������� ����� ���� �� ����.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "���������� ������"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "������ �� �������������� �� ������;"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "����� ������"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"��������\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "������������"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "�������� �������� ���������� �������������."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "���� ����� � ������ ����� ��� ���������� �������������"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "�� ���� ������������ ���������;"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "�����������/����������"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "��������� ��� ����������� � ��� ����������;"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "�����������"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "��� ��������"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "����������"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "�������� ����������� �������"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "�������� �������� ���� ���������."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "���� ���������"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-"�������� �������� �������� ���� ���� ����� ����� ����������� �� ������� ���."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "����������� ��������"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "����������� 2 ��������"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "����������� 3 ��������"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "������� ������ PCMCIA "
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "������� IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "��� �������� ���������� �����������"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "������� ����������� ��� ������������ ������� ��������."
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "�������� ������ ��������"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"��� ����� �� ������� ��� ������ �����������, ����� ���� ������������� :(\n"
-"�� ���������� �� �������� ���������� ��� ����������� ����������� ��� ���\n"
-"�� �������� �� ������. � ���� ������� ��� ����� �� ��� ���������� ��� \n"
-"DrakX �� ������� ��� ������ �����������. �� ������ �����: %s\n"
-"\n"
-"���������� �� ���������� ���� �� �����������;\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"�� DiskDrake ������� �� �������� ����� ��� ������ �����������.\n"
-"��������� �� ���� ��� ������!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"��� ������� ��������� ����� ��� 1MB bootstrap! � ����������� �� ����������, "
-"���� ��� �� ���������� �� ������� ���, �� ��������� �� ������������� ��� "
-"��������� bootstrap �� �� DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "��� ������� ��������� root ��� ��� �������������� ��� �����������"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Root Partition (������ ��������� ����������)"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "���� ����� � ������ ��������� (/) ��� ���������� ���;"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"���������� ������������ ��� �� �������������� �� ������� ���� ������ "
-"�����������"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "�������� ����������� ���� �����������"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "������� ��� ��������� blocks;"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "����������� �����������"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "���������� ��� ����������� ������� %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"��� ������� ������ swap ��� ��� ���������� ��� ������������, �������� "
-"���������"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "����� ��� ��������� ������"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "������������� ������� ���� ����������"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"�� ������� ��� ��� ���� ������ ��������� ���� ��� ����������� � ���������� (%"
-"d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "������ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "�������� (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "����������� (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"�������� �������� �� ������� � ���������� ��� �������� ������� ��� "
-"��������.\n"
-"� ����������� ����� � ���� �� ��� ��������� ��������� ������������."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "������� ��� ��������"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "������� ��� ��������"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "������� �������"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "�������� �������� ��� �������� ��� ������� �������"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "���������� �� ��������"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "�� ���������� ������� ����� ���������� ��� �� ��������� ����"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"��� ����� ��� �� �������� CDs, ������� Ok.\n"
-"��� ��� ����� ������ ��� �� �������� CDs, ������� �������.\n"
-"��� ��� ����� ������ ��� ����, ����������� �� ��� ������� Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ������� \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "������������ ������������"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"����������� ������� %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "��������� ���� ��� �����������"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "�������� �������� �� �������� ��������� ���� ����� %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "�������� �������� �� �������� ��������� ���������� ���� ����� %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"�������� ���� �� ���������� ������������� ���������.\n"
-"\n"
-"�������:\n"
-"\n"
-"���� ��� ������������ ����� ��� ������� �� ������� ���� ������� �� ��� "
-"������������,\n"
-"� ������� ������ �� ��������� ��� �� ����� ��� ��� ������� ��� ���������� �� "
-"���������,\n"
-"����������� ���/� �������������� ���� �� ���������.\n"
-"\n"
-"� ������� ������ �� �������� �� ��� ������� ���� ��������� ������. ����� "
-"��������� �����\n"
-"��� �����, ������ �� �������� ��������.\n"
-"\n"
-"�� ����� ��������� � Mandrakesoft, �� ������������� ��� �� ����������� ��� "
-"��� ������ ������\n"
-"��� ������������ ������ (��� ������������� ������ ����� ������� ������, "
-"��������� �����������\n"
-"�����������, ������� ����������� ��� ����� ����� ��� �� ��������� ��� "
-"������� �������.\n"
-"\n"
-"��� ������������ ����������� ������������� \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "������� ��� ���� �������"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "�������� ���� ��� ��� ����� �� ����� � ���� �������"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "������� ��� ���� �������"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "���� ����� � ���� ����;"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "�� ����� ��� ���������� ��� ����� ���������� �� GMT (��� ����������)"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "��������� ������������ ���� (����� NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "������������ NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "���������������� ������������ CUPS"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "������� ���������"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "����� �����;"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "��������"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "�������"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "���������� ����"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "���������"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "K���� ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "����� ����"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "����� TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "������ ������"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "����������� root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "����� �����������"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"���� �� ����������� ����� ���� ���� (������ �� ����� ����������� %d "
-"���������� �����)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "����������� ����������"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "����������� LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "������������ LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "���������� NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "������� (domain) NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "������������ NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"��� ������������� �������� ��������� ��� ����� ��� ���������� �� ����������\n"
-"�� ������� ��� ����� ��� ����� ��� ������������ ���������. ���� ����� "
-"������� ��� ��� ������\n"
-"�� ������������� �� SILO , ��� ������ ���� ����������� ����������� �� SILO\n"
-"� ��� �� ��������� ��� ��� ���������� �� ����� SILO. ���� � �������� ������\n"
-"������ �� �������������� �� ��������� �� ��� �������� �������� ��� "
-"Mandrake,\n"
-"�������� ���������� ��� ��������� ��� ���������� ���� ��� ������ �����.\n"
-"������ �� ������������� �������� ���������;"
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "������ ������ ��������"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "�������� ������ ��������"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "���������"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"��� ������������� �������� ��������� ��� ����� ��� ���������� �� ����������\n"
-"�� ������� ��� ����� ��� ����� ��� ������������ ���������. ���� ����� "
-"������� ��� ��� ������\n"
-"�� ������������� �� LILO (� �� grub), ��� ������ ���� ����������� "
-"����������� �� LILO\n"
-"� ��� �� ��������� ��� ��� ���������� �� ����� LILO. ���� � �������� ������\n"
-"������ �� �������������� �� ��������� �� ��� �������� �������� ��� "
-"Mandrake,\n"
-"�������� ���������� ��� ��������� ��� ���������� ���� ��� ������ �����.\n"
-"������ �� ������������� �������� ���������;\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "�������, ��� ������� ���������� ������ ���������"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "�������� ����� ��������� ��� ���������� ��������� ���������"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "�������� �������� ���� ����� %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "���������� ������ ���������"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "������������ ������������ ���������"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"�������� ��� ����� ��� ������ � �������\n"
-" ��������, � yaboot bootloader ��� �� �������� ��� ���.\n"
-"� ����������� �� ����������, ����\n"
-"�� ��������� �� ��������������� �� BootX ��� �� ���������� �� �������� ���"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "������ �� ��������������� �� aboot;"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"������ ���� ��� ����������� ��� aboot, \n"
-"���������� ����������� ������������, ����� ��� �� ���� ���� ��� ���������� "
-"��� ���������� ��� ������ ����������;"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "���. ��. ���������"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"� ����������� ��� ������������ ��������� �������. ���������� �� �������� "
-"������:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"������ �� ��������� �� �������� ��� Open Firmware boot-������� ���� ��\n"
-" �������������� ��� bootloader.  �� ��� reboot ��� ����� ��� �������� ���\n"
-" bootloader, ������� �� Command-Option-O-F ���� �� reboot ��� ��������:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" ���� �������: shut-down\n"
-"���� ������� �������� �� ������ �� ����� ��� �������� ��� bootloader."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "�������� ����� �������� ���� ����� %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "������������ �������� ��������� ������������"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"������ ������ ��� �������������.\n"
-"\n"
-"������ ������� �� ������������� ����;"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"������������, � ����������� ������������.\n"
-"��������� ��� �������� � �� CD ��������� ��� ������� return ��� "
-"������������.\n"
-"\n"
-"\n"
-"��� ����������� ������� �� ���������� ����� ��� ������� ��� Mandrake Linux,\n"
-"�������������� ��� ������ \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"����������� ������� �� ��� ��������� ��� ���������� ��� �������� ��� "
-"�������\n"
-"�������� ��� �������� ������ ������ ��� Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "������������ ��������� ��������� ������������"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"� �������� ����������� ������ �� ����� ������ ��������,\n"
-"�� ����� ��� ��������� �� �������� �� ������ �����!!\n"
-"(���� ���������� ��� ����������� ������������ �� ���� ����������).\n"
-"\n"
-"������ �� ��������� �� ����������� ��� �����������.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "��������"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "������������"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "���������� �������� �������"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "����������� Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> ������ ������     | <Space> ������� | <F12> ������� ��. "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "�� kdesu ������"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "�������� �����"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr " ��� �������������"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "�������� ����������"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "�����������"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "�������� �������"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "�������� �������"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "�������� ������ �������� ��� �������� �����������"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "���� �������, �������������\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "� ������� ���; (��' ������� %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "� ������� ���; (��' ������� %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "��������: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "������ �� ��������������� �� aboot;"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "� ������� ���; (��' ������� %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "������� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "������ ��������� (UK)"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "�.�.�. (US)"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "�������� (�����)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "�������� (�����������)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "�������� (��������)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "������������ (��������)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "�������� (��������)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "������������"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "�����������"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "�������� (��������� ����������)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "�������� (������� ����������)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "������� (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "��������� (����� ����� �������)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (���)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (���������)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (���)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "������� (\"������\" ����������)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "������� (\"��������\" ����������)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "������ (��������)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "�������� 106 ��������"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "��������� ������������"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "��������� ��������"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "���������� AZERTY (�����)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "���������� AZERTY (���)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "���������� \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "���������� \"��������\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "�������� (���������� qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "�������� (���������� qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "������������"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "�������� (������)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "��������� (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "��������� (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "������ (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "��������� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "��������� (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "������������ (���������)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Thai"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "�������� (����������� \"F\" �������)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "�������� (�������� \"Q\" �������)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US �������"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "������� \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "�������������� (��������/���������)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "�������� ��������� %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "��������� �� logical volumes �����\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "������� ����� ������� PS2 �� ������"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 ��������"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "������� ����� �� 2 �������"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "������"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "�� ������"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "��������"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "������� ����� �� 3 �������"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (��������, ������ C7 �����)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "��� ��������"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "����� ��������"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "������"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "����� �������"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "�������� ��������� �� �������"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "��� ������������ ���������"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "������� �� ������!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "�����"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "������� -�"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- �����������"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "�����;"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "������� ��� ���������"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"� ��� ������ ������ �������� adsl ����� pppoe.\n"
-"��������� ��������� ������������� pptp, ������� ����� dhcp.\n"
-"��� ��� ������, �������� '����� pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "����� dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "����� pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "����� pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"����� ������ dhcp ������ �� ���������������;\n"
-"� ���������� ����� dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"��� ������� ������������ ������� Ethernet ��� ������� ���.\n"
-"��� ����� �� ������� ����� ��� ����� ��� �������."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "�������� ������� �������"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"�������� �������� ���� ������� ������� ������ �� ��������������� ��� ��� "
-"������� ��� ���������"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "��� ������� ������������ �������"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "������� �������"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"�������� �������� �� ����� ��� ���������� ��� �� ������.\n"
-"��������� ������������ DHCP ��� ����������� ����� ����.\n"
-"�� ����� ���� ������ �� ����� ��� ������ ����� ����������,\n"
-"���� �.�. ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "����� ����������"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "������ �������� �������"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "��������� ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "��������� ����� ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "�� ������ ����� � ISDN ������� ���;"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"���� ISDN ������� ���������;\n"
-"\n"
-"* � ����� ������� ������������ �� isdn4net. �������� ������� ��������,\n"
-"  ���� ����� ���� ������� ��� ���� ������� �� ��������� ��� ��� ����������.\n"
-"\n"
-"* � ��� ������� ����� ���������� ���� ���������, ����������� ����������,\n"
-"  ���� �� �������� ��������.\n"
-"\n"
-"����������� ��� ������� �������.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "��� ������� (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "����� ������� (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "��������� ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"�������� ��� ������� ���\n"
-" ��� ��� ����� ���� ��������, �������� Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "���������� ���������"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "������ (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "��������� ������"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"��������� ������ \n"
-" ����� D-Channel (���������� �������)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "���� ���������� ������ �� ���������������;"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "�� ����� �����;"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "��� ����"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"��� ����� ISA �����, �� ����� ���� ������� ����� �� ������ �� ����� ������.\n"
-"\n"
-"��� ����� PCMCIA �����, ������ �� ������ �� irq ��� �� io ��� ������ ���.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "�������"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "��������"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "���� ����� � ISDN ����� ���;"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"�������� ��� ISDN �����, ���� ��� ���� ��� ���� ���. �������� �������� ��� "
-"����� PCI ��� ��� �������� �����."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "��� ������� ����� ISDN. �������� �������� ��� ��� ��� �������� �����."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "�� ���� �������� ����� ����� ����������� �� modem ���;"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "�������� dialup"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "����� ��������"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "������� ���������"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "����� script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "����� ����������"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "����� �������"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "������ ������������ DNS (�����������)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "�������� ������������ DNS (�����������)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"�������� �� ������������� � �� �������������� ��� ������� ���."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"�������� �� �������������� ��� ������� ���."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "���� �� ������ ����� ������������ ��� ���������."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"�������� �� ���������� ��� ��������� � �� �������������� ��� ������� ���."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "���� �� ������ ��� ����� ������������ ��� ���������."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "�������"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "����������"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "������� �������"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "������� ��� ������� ���������� (internet)"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "���� �� ���������� ��� %s �������."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"���� �� ���������� ��� %s �������.\n"
-"\n"
-"\n"
-"������� �� OK ��� �� ����������"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "��������� �������"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"������ ������ ��� �������� �����������, �� ������ ����� ��� ����������.\n"
-"����� ���� ��� �� ��� �� ����������� ��� ��������� ���, � ����� ��� �� "
-"������������� �� ������� ��� Internet.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"����� ������ ���� ����� �������� ��� �������\n"
-"\n"
-"������� ������� �� ���������� �� ������� ��� ��� internet/������.\n"
-"�� ��� ������ �� ��������������� ��� �������� ���������, ����������� �� "
-"checkbox.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "�������� �� ������ ��� �������"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "����� ��������� ����������"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "���������� ��������..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "���� ������� �� modem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "����������� ���� ����� %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "������� ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "����������� �� %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "������� ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "����������� ���� ����������� %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "��������� �������"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "����������� ��������� �������"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "������� LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "�����(��) ethernet ������������"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "�������� �� ������� ��� ������ �� ���������"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"����� �������� ������� ������� ��� �� ��������� ��� Internet.\n"
-"�������� ����� ��� ������ �� ���������������.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "������� Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "������ �� ��������� ���� ��� ��������;"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "��������� �������"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"��� �������� ����������� ���� ��� ������������ ��� �������: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"������������, � ������� ������� ��� internet ��������.\n"
-"\n"
-"�� ��������� �� ����������� ���� ��� ������� ���.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"���� ����� ����, ����������� �� �������������� �� �\n"
-"���������� ��� �� ��������� �� ���������� ������� hostname."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"�������: ���� � ������� ����� ��� ���������� ��� �� ��������� �� ��  "
-"���������.\n"
-"���� ������� OK ��� �� ��������� ��� ���������� ���������.\n"
-"���������� �� �������� ����� �� �������� ��� ��������� �������."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"�������� �������� ��� IP ��������� ��� ���� �� �������.\n"
-"���� �������� ������ �� �������� �� IP ��������� �� ��������\n"
-"����� (����������: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "������� �������� ������� %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "��������� IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "����� �������"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "�������� IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "� IP ��������� ������ �� ����� �� ����� 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"�������� �������� �� ����� ��� ����������.\n"
-"�� ����� ���� ������ �� ����� ��� ������ ����� ����������,\n"
-"���� �.�. ``mybox.mylab.myco.com''.\n"
-"�������� ������ �� �������� ��� ��� ��������� IP ��� ����� �������"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "������������ DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "������� �����"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "��������� proxies"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "� proxy ������ �� ����� http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "� proxy ������ �� ����� ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "��������� ���������� (Internet)"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "������ �� ���������� �� ���������� ��� ��������� ����;"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "������ ��������... "
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "�� ������� ��� ����� ����������� ��� ���������."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "��� ���� ���������, �� ������������� ����."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"�� ������� ��� ��� �������� �� ����� ����������� ��� ���������.\n"
-"��������� �� �������������� ��� ������� ���."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "��������� ���������"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "�������� ������� � ����������� �� �������� �����"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ ������"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "DMA ������"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO ������"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 ������"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 ������"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "���������� ������� ���������"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "����� ������� (�.�. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "������� ��������� �������"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Provider dns 1 (�����������)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Provider dns 2 (�����������)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "�������� ������������"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "������ ������"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "�������� ��������"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "������ ��������: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "'����� ���������� (user name)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "����������� �����������"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "������� �������: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "� ���������� ��������� ��� ������������� �� ����� ��� ���� ����������"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"������� ��� ���� ���� ������ ����������� �� ��� ����� �� �� �������������.\n"
-"� �������� ���� ����� �� ������������ ��� ����������� ����������� ��� ���� "
-"���� �� ���� �� ������ ����� ���� ���������� ���������"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "� ��������� ��� �� ������ %s �������: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "������������ �������� ������"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "������ �������� ��� ������ %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"���� ���� ��������� ��� ����� ���. \n"
-"��� ���� ������� ��� ������������ ��� ��������� �������. \n"
-"���� �������� ��� � ����������� ������� ��� ����� �� ��������� ��� ������ "
-"���������"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "������ �� �������"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "���������"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "���� ����"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "����"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "����"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "������� ���������"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "���������������� ���������"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "���������������� ������������ CUPS"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "���������������� ������������ lpd"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "��������� ������� (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "������������ ����������"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "������� �������� URI"
-
-#: ../../printer.pm_.c:55
-#, fuzzy
-msgid "Pipe job into a command"
-msgstr "����������� ���� ������"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "������� ���������"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "���������������� ���������"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "������ �������� ��� ������ %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(module %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP ��������� ����������� CUPS:"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (������� ��' �������)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "������ �������� ��������"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "��� ����� ������������ � ��������� ���;"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"�� ��� ����� ����������� CUPS, ��� ���������� �� ��������� ��������� \n"
-"���. �� ��������� �� ������������� ��������, ����� �� ����� �����������\n"
-"�� ����������� ������. �� ����� ��� ���������, �� ������ �� �������� ���\n"
-"IP ��������� ��� ����������� CUPS ��� ���� ��� ��� ������ �����."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "������� L��"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "���������������� ������������ CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "� IP ��������� ������ �� ����� �� ����� 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "� ������� ����� ������ �� ����� �������� �������!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP ��������� ����������� CUPS:"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "����"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Boot ����� �������"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "���������� ��������..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "������ �����"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "�������� ��������"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "������� ���������"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "���������������� ���������"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "����� ��������� ����������"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "���������������� ���������"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "����������� �� %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "������� �������� URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "������� ���������"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "�� ���� �������� ����� ����� ����������� �� modem ���;"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "������� �������� URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "��������� ��������"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "����������� ������� %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "����������� ������� %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "�������� ����� ������ CUPS"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "�������� ����� ������ CUPS"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "�������� ���������������� lpd ��������"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"��� �� ��������������� ��� ��������������� ���� ���������\n"
-"lpd, ������ �� ������ �� �������� ����� ��� ����������� \n"
-"����������, ����� ��� �� ����� ��� ����� ��� ����� �� \n"
-"��������������� �� ����� ��� �����������."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "��������������� �������� �����:"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "���������������� ���������"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "��������������� �������� ����� ������!"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "��������������� �������� ����� ������!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "�������� �������� SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"��� �� ���������� �� ���� SMB ��������, ������ �� ������ �� \n"
-"SMB �������� ����� (��������! ������ �� ����� ����������� ��� \n"
-"�� �������� ����� TCP/IP!) ��� ���� ��� ��� ��������� IP ��� \n"
-"����������� ����������, �� ����� ��� �������� ���� ����� ���������� \n"
-"��������, ����� ��� ����������� ���������� ���������� ���� ������� \n"
-"������, ����� ������ ��� ����� � ������ ��������."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "�������� ����� SMB �����������:"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP ��������� SMB �����������:"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "����� �����:"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "����� ��������:"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "���� �� ����� ��� ����������� � � IP ��� ������ �� ������!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "�� ����� ��� ��� Samba ������!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "�������� �������� NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"��� �� ���������� �� ���� �������� NetWare, ������ �� ������\n"
-"�� ����� ��� ����������� ���������� NetWare (��������! ������\n"
-"�� ����� ����������� ��� �� �������� ����� TCP/IP!), \n"
-"�� ����� ��� �������� ���� ����� ���������� ��������, ����� ���\n"
-"����������� ���������� ���������� ���� ������� ������ ��� ����� ������."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "������������ ����������"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "����� ����� ��������"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "�� ����� ��� ����������� NCP ������!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "�� ����� ��� NCP ����� ������!"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "�������� �������� socket"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"��� �� ���������� �� ���� �������� socket, ������ �� ������ �� \n"
-"�������� ����� ��� �������� ��� ����������� ��� ������ �����."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "����� ��������"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "����� �������� ������!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "������� �������� URI"
-
-#: ../../printerdrake.pm_.c:888
-#, fuzzy
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"�������� �� ������� ���������� �� URI ��� ��� �������� ���� ��������. �� URI "
-"������ �� ����� ���� ��� CUPS ���� ��� Foomatic ������������. ��� ��� ��� "
-"�������������� ���� �� URI ����� ��� ��� �� spoolers."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "��� ����� URI ������ �� ��������!"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"���� �������� ���������� ��� ����� (�.�. lp).\n"
-"�� ����� ��������� ��� ��������� ��� ���������� �� \n"
-"������������. ����� ���� ������ ��� ���� �������."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "����� ��������"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "���������"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "���������"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "�������� ����� ������ CUPS"
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "���������������� ���������"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "�����;"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "���������������� ���������"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "������� �������� ��������"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "�� ����� �������� �����;"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "��������� ���������� (Internet)"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "��������� ���������� (Internet)"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "������� %s ������ �� ����� �������� �������!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "������� %s ������ �� ����� �������!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "������� %s ����� �����!"
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "������ �� ���������� ��� ����������� ������;"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "������ �����"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "���������"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "������"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "�������� ������������ �������..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "�������� ������������ �������..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "�������� ������������ �������..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "�������� ������������ �������..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"��� � ������������ ������������ ������� ��������� ���� ��������.\n"
-"������ �� ������� ������� ������ ����� � �������� �� ���������.\n"
-"��������� ���������:\n"
-"%s\n"
-"\n"
-"����� ����� � ��������"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"��� � ������������ ������������ ������� ��������� ���� ��������.\n"
-"������ �� ������� ������� ������ ����� � �������� �� ���������.\n"
-"����� ����� � ��������;"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "������� ���������"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "��������"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "������� ����������� �������."
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "������� ����������� �������."
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "�������� ��������"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "��������� ���������� (Internet)"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"�� ����� ��� �������� ������ �� �������� ���� ��������, �������� ��� ��� "
-"��������� underscore"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "������� ���������"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "�������� ����� ������ CUPS"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "�������� ��������..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "������� �������"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "� ����� ��� ���� ��������� �����"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "������� �������"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "���� ������� ��������� ������ �� ���������������;"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "�����"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "���������"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "���� ������� ��������� ������ �� ���������������;"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "������� Spooler E�������"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "���� ������� ��������� ������ �� ���������������;"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "������� ��������"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "����������� ������� %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "�������� ��������"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "������� ��������"
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "�� ������ �� ��������� ���� ��������;"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "���������"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"�������� �� ��������� ����� ���������.\n"
-"�������� �� ���������� �� ����� � �� �������� ��� ����������."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"�������� �� ��������� ����� ���������.\n"
-"�������� �� ���������� �� ����� � �� �������� ��� ����������."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "������� �������"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "�������� ���������"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "������ �� ���������� ��� ���������;"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "��������� ���������� (Internet)"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "������ �� ���������� ��� ���������;"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "������� Internet"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "������� �������� ��������"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "�������� ������������ �������..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "������ �� ���������� ��� ���������;"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "���������������� ���������"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "���������������� ���������"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "������� ���������"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "������ �� �������������� �� ������;"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "���������������� ���������"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "������� proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"����� ������ ��� �������� �������� ��� proxy.\n"
-"\n"
-"���, �� ��������� �� ��������� ���� http ��� ftp proxies\n"
-"�� � ����� login ��� ������ ���������\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"�������� ����������� ��� ����������� ��� �� http proxy\n"
-"������ �� ���� �� ��� ���������� http proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "�����"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "�� URL ������ �� ������ �� 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "� ������� ����� ������ �� ����� �����������"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"�������� ����������� ��� ����������� ��� �� ftp proxy\n"
-"������ �� ���� �� ��� ���������� ftp proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "�� Url ������ �� ������ ��'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"�������� �������� proxy login ��� ������ ���������.\n"
-"������ �� ���� ��� ��� ���������� login/passwd"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "������� ���������"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "������������������ ��� ������ ���������"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "�� ������� ��������� ����� ��������. ����������� ����!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "��� ����� �� �������� ��������� ��� _�������������_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "��� ����� �� ���������� �� ������ %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "�������� mkraid"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "�������� mkraid (����� ����������� �� raidtools;)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "��� �������� ������� ����������� ��� RAID �������� %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "�������� ��� ALSA (Advanced Linux Sound Architecture) ���������� ����"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, ��� ��������� ���������� ��������� �������."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"�� apmd ������������ ��� ���������� ��� ��������� ��� ���������.\n"
-"������ ������ �� �������������� ��� �� �������� �������� ��� ���������� �� \n"
-"��������� ������� �������� ��� ���������."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"������� ������� ����������������� ��� ��� ������ at ��� ������ �������\n"
-"���� � ������ ��� ���������� ����� ������ �������."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"�� cron ����� ��� ������ �������� UNIX ��� ������ ������� ������������ ��� \n"
-"��� ������ �� ����� ������� ����������. �� vixie cron ��������� ���� "
-"������ \n"
-"�������� ����������� ��� ������������� �������� �������� ��� ��� ������� "
-"���������."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"�� GPM ��������� ���������� mouse �� ��������� ���������� �� �������\n"
-"�������� ��� ��������� ����������� �������� ��� ����������� �� ����� \n"
-"mouse ���� �������, ����� ��� ���������� ����������� menu."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"�� HardDrake ������ ��� ��������� ������ ��� ����������� ��������\n"
-"�� ���/��������� �����."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"� Apache ����� ���� ������������ WWW. ������ �� ������������ ������\n"
-"HTML ��� CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"� �������� ��������������� Internet (inetd) �������� ��� ��������\n"
-"����� ��������� inetrnet ����� �����������. ����� �������� ��� ��� \n"
-"�������� ������ ���������, ���� telnet, ftp, rsh ��� rlogin. � "
-"��������������\n"
-"����� ��� ��������� ������������� ������ ��� ��� ��������� ��� ��� ������\n"
-"����� ��������."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"�������� ������� filtering ��� Linux ������ ��� ������ 2.2, ��� �������\n"
-"���� firewall ��� �� ����������� �� �������� ��� ��� ��������� ���������."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"���� �� ������ �������� ��� ���������� ���������� ������������� ��� ���� \n"
-"�������� ��� /etc/sysconfig/keyboard. ���� ������ �� ��������� �� ��� \n"
-"����� ��� ��������� kbdconfig. ������ ������ ����� �� ����� ��������������."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"�������� �������� ��� ������������ ��� ������ ��� /boot ��� ��\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"�������� ��������� ��� ������� �������� ���� ��� �������� ��� ����������."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"�� Linuxconf ����� ���� ����� �������� ��������\n"
-"���� ��� �������� ��� ���������� ��� �� ���������� �� ������� ��� ����������."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"�� lpd ����� � �������� ���������� ��� ���������� ��� �� ���������� \n"
-"� ������ lpd. ����� ������ ���� ������������ ��� ������� �� ������ \n"
-"����� ���������."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual ������������, ��������������� ��� �� ������������ ���� ������\n"
-"�������� ��� �������������� �����������."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"� named (BIND) ����� ���� Domain Name Server (DNS) ��� ���������������\n"
-"��� �� ���������� ������� �� ����������� IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"������� ��� ���������� ��� �� �������� ��������� ������� (NFS, \n"
-"SMB ��� NCP (Netware))."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"�����������/������������� ��� �� ������������ ������� ��� ����� \n"
-"��������� �� �������� ���� ��� ��������."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"�� NFS ����� ��� ��������� ��������� ��� ��� ����������� ������� �� \n"
-"������ TCP/IP. ���� � �������� ��������� ����������� �����������, � \n"
-"������ ���������� ��� �� ������ /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"�� NFS ����� ��� ��������� ��������� ��� ��� ����������� ������� �� \n"
-"������ TCP/IP. ���� � �������� ��������� ����������� ����������� �������."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"�������� ������������ ��� numlock �������� ���� �������\n"
-"��� �� XFree ���� ��� �������� ��� ����������."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "���������� ��� OKI 4w ��� �������� winprinters."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"� ���������� PCMCIA ��������� ���������� ��� ������ �������, modems ��� \n"
-"������� �� ��������� laptop. ��� �� ��������� ����� �� ���� ������� ��� "
-"��� \n"
-"������, ����� ����� ������� �� ������������ �� ��������� ��� ��� �� "
-"�����������."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"� portmapper ������������� ��������� RPC, �� ������ ����������������\n"
-"��� ��������� ���� �� NFS ��� �� NIS. ������ �� ����� �������������� �� \n"
-"��������� ��� ����� �� ������������ ������� ����������."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"�� postfix ����� ���� ��������� ��������� �������������, �� \n"
-"��������� ��� ��������� ��� ��� �������� ������������� ��� �� \n"
-"��� ������� ��� ����."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"���������� ��� ���������� ��� ���� ��������� ��� ���������� ��� \n"
-"��� ���������� ��������� ��������� ������� �������."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"������� raw �������� �� block �������� (���� ����������� �������\n"
-"������), ��� �� ����� ���� ��� ��������� ���� � Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"� �������� routed ��������� ��� �������� ��������� ��� ������ ������������ \n"
-"IP ���� ��� ���������� RIP. ���' ��� ��� �� RIP ����� ������ ����������� "
-"�� \n"
-"����� ������, ���������� ������ �������� ������������� ���������."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"�� ��������� rstat ��������� ����� ������� ���� ������� ���\n"
-"������� ��������� ��������� ��� ����������� ������� �� ���� \n"
-"�� ������."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"�� ��������� rusers ��������� ����� ������� ���� ������� �� \n"
-"������������� ���� ������������� ������� ����� ����������."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"�� ��������� rwho ��������� �� ����������������� ������� �� ���� ���� \n"
-"�������� ��� ������� ��� ���������� (�������� �� �� finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "�������� ��� ���������� ���� ��� �������� ���"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"�� Syslog ����� � �������� ��� ������������� ������ ����� ��������� \n"
-"��� �� ������ �������� ��� ������ �������������� ���������� (log files)\n"
-"���������� � ������� ���������� ����� ��� ���������."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "������� ��� ������ ��� ��� usb �������� ���."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"�������� ��� �������� ����������� �������������� X Font Server (���� ����� "
-"���������� ��� �� ������� �� XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "���������"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "��������"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "��������� ����������"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "�������� ���������������� lpd ��������"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "���� ���������"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "������������"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "�������������"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Append"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "���������:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "������"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "��������� ������"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "�������� ��� Internet"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "�������� - �������"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "��������"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "������ �������"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "������� �������"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "�������� ����� SMB �����������:"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "���������"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "��� ��������"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "����������� ������� %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"��� ����� �� ������� ��� ������ �����������, ����� ���� ������������� :(\n"
-"�� ���������� �� �������� ���������� ��� ����������� �����������"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "������!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "��������� ���� ��� �����������"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Boot ����� �������"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "������������!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "�����������"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "�������� ������"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "����������� ������� loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "������������ �������� ������"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "������������ �������� ������"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "������������ �������� ������"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "������� �������"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "�������� �������� �� ������ ��� ������ �� �������������"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "�������� �����"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "�������� Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "������ �����"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "�������� ��������� �� �������"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "�������� ����������� ����"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "�������� ����������� ����"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "������������������ ��� ������ ���������"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "������� LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "������ �������� ��������"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "�������� �������� ���������� �������������."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "�������� ����� ���� �� ��� ���������"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "�������� �������� �� ������ ��� ������ �� �������������"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "������������ �������� ������"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "�������� ��������� �� �������"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "������������ �������� ������"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "������� �������"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "������ �����"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "�������� �������� �� ������ ��� ������ �� �������������"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "�������� �������� ��� ������."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "���������� ������� ������"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "������ �����"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "�� ������"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "�� ������"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "���������� ������"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "��������� �������"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "�������� �������� �� ������ ��� ������ �� �������������"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "�������� �������� �� ������ ��� ������ �� �������������"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "�����. ���. ���."
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "��������"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "�� ���� �������� ����� ����� ����������� �� modem ���;"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "��������� �������"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "������������ �������� ������"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "�������� �������� ���� ���������."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "������������ �������� ������"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "��������� ��� ��������"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "�������� �������� ���� ���������."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "����"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "����������� ����������"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "��������� ��� ������"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "��������� ��� ������"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "�������������"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_�������"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- �����������"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "���������:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "������������ �������� ������"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "��������� ��� ������"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "������� -�"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "������� �������"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "�������� �������� ��� ������."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "�������� �������� ��� ������."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "�������� �������� ��� ������."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "������������ �������� ������"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "������������ �������� ������"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "������������ �������� ������"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "���������� �� ������"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "�������� ��������� �� �������"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "�������� �������� �� ������ ��� ������ �� �������������"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "��������� �������"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "��������� �������"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "������� L��"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "������� L��"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "�����. ���. ���."
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "� ����������� ��� %s �������. ���������� �� �������� ������:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "��� ������� ������������ �������"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "������������"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "������������ ������������"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "����������"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "������. ��������."
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "������� L��"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "������ ��������"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "�������� ����������� ���� �����������"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "�������"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "�������"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "���������"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "����������� ����������"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "�������� ������"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "���������������� ���������"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "������ Init"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "��� ������� ������������ ������� ��� ������� ���!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "�����������"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "��� ������� ������������ ������� ��� ������� ���!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "������"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "����������� �������� Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "����������� �������� Internet ���������������"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"� ������� ��� ����������� �������� Internet ���� ��� �����.\n"
-"���� �� ������ ����� ������.\n"
-"\n"
-"�� ������ �� ������;"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "��������������"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "�����"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "������������"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "�������������� ������������..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "����������� �������� Internet �����������������"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "����������� �������� Internet �����������������"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"� ������� ��� ����������� �������� Internet ���� ��� �����.\n"
-"���� �� ������ ����� ���������.\n"
-"\n"
-"�� ������ �� ������;"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "������������"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "������������ ������������..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "����������� �������� Internet ���������������"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"� ����������� ��� ������ �� ��������� ���� ���� �� ���������� \n"
-"��� ������� �� �� ��������� �� ������ �����������.\n"
-"\n"
-"��������: ���������� ���� ����������� ������� ���� ���� �� ������������� ��� "
-"������ ������ (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "����������� %s (����� ���������� %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "����������� %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "��� ������� ������������ ������� ��� ������� ���!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"��� ������� ������������ ������� Ethernet ��� ������� ���. �������� "
-"��������������� �� ��������� �������� ������."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "������� �������"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"������� ���� ���� ����������� ������������ ������� ��� ������� ���:\n"
-"\n"
-"%s\n"
-"\n"
-"�� ��������� �� ������ ��� ������ �� ����� ��� �����������."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"�������� �������� �� ������������ ������� �� ��������\n"
-"��� ������ ��� ������."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "� ����� ��� ���� ��������� �����"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Boot ����� �������"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "��������� ���������� (Internet)"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP ��������� ����������� CUPS:"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"������ ������������������ ��� ���������� LAN ���� �������� ������� ��� %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "����������� ������� firewall!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"�������! ����������� ��������� ������� firewall. ���� ���������� ���������"
-"\"������������\" ��������� ���� ��� �����������."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "�������..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "�������, ����������� ����������, �������� ������������..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "�������� ���� ��� ����������� ��� ������� %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"'��� ����� ���������.\n"
-"�������� ���� �� ���������� ��� ������� ��� ��� ��������� �� ������ "
-"����������� ��� ������ ��� ������, �� ��� ����� ��������� �������� ������� "
-"(DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "� ������� ���� ��� �����, ���� ���� �� ������ ����� ����������������."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "� ������� ���� ��� �����, ��� ���� �� ������ ����� ��������������."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "� ����������� �������� Internet ��� ���� ��������� ����."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "������� ����������� �������� ���������� (internet)"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"����� ������ ��� �������� �������� ��� ����������� �������� Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"����� ���� ��� ������� ��� �� ���������� ��� ����� ������������."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "������� ������� (%d adapters)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "������: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "�������� ������..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "������ ��� ��������:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "��� ������..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "����� ����������: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "�������� ��� Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "�����:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "���� �������:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "�����������:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "���������:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "������� ��������� ��� Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "������� LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "������"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "�����������"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "����������"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "���������:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "������� ������� �������..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "�����..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "������������"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "�������� ����������... �������� ���������"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "���������"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "�� ���������"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "�������..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "����������..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"��� ����� ������ ��������� �����������.\n"
-"�������� ��� �������� ���� ��� '�������'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "������� L��"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "������������ %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "���������� ���������"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "��������� ���� �������� ����������"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "������� DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"��� ����� ������� �� �� internet.\n"
-"������������ ��� �������� ���� ��� '�������'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "������� �������� ���������� (internet)"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "������� �������� ���������� (internet)"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "����� ��������: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "����������"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "���� �������"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "����� Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "������� DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "������� �������� ���������"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "������ �������"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "�������� �� �������� ��� ������ �� ���������������"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "�������� (������)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "������"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "���������"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "������"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "��������"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "�����: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "�������� �������� ���������� �������������."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "������ �� BackSpace �� ���������� Delete ���� �������;"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "������ Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"�������� �������� �� CD ������������ ���� ����� ��� ��� ������� ��.\n"
-"��� ��� �� �����, ������� ������� ��� ������� ��������� �����������."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "��� ����� �� �������� �� live upgrade!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/������/_���"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/������/_�������"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/������/���_�������"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/������/���������� _��"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/������/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_��������"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/��������/����"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_�������"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/�������/_������� ��..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "������ �����"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "��������"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "���������"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "��� �������� ��� �� ������� �� log ���"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "���������"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "���������"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "��� ���������"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "�������� ��� ������"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "����������"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "����������� ��� �������"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "�������� ����������, ����������� �������: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "������� �������"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"����� ������ ��� �������� �������� ��� proxy.\n"
-"\n"
-"���, �� ��������� �� ��������� ���� http ��� ftp proxies\n"
-"�� � ����� login ��� ������ ���������\n"
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "������������"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "�����������"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "��������� ��������"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "���������� ��"
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "�������� �������� ���� ���������."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "��� ������� serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "��������� ������ ��������;"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "�������� ����� ��������"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "������� ���������"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "������� Firewalling"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "������� firewalling"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"����� ��� �������� ��� firewall.\n"
-"����� ���� ��� ������� ��� �� �������� � �� ���������� �� firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"����� ���� ��� ������� ��� �� ������� ��� ������ firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "�������� ������"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "�������� �����������"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "���������� ������� ������"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "������� ���������"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "�������� ������������"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "��������"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "�����. ���. ���."
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "������. ��������."
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "������� �������"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "����������� ����������"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "�������� ������"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "������� �������"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "������� ���������"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "���. ��. ���������"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "������� ���������"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "������� �"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "����������� ����������"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "������"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"������� tinyfirewall\n"
-"\n"
-"���� �������� �� ��������� ��� firewall ��� ���� �� �������� Mandrake "
-"Linux.\n"
-"��� ��� ������ ���������� ���� firewall, �������� �������� ����\n"
-"����������� MandrakeSecurity Firewall �������."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"���� �� ��� ������� ��������� ��� �� ����� ��������� ������ �� �������\n"
-"�� ���������� ��� Internet.  �������� ��������� ���������� ��� ����� ���\n"
-"���������, ����� � �������� ��� ���������� ��� ����� ���������.\n"
-"\n"
-"��������, �� ��� �������� ������ ��� �������������� ������ ��� ����� ��� "
-"���������,\n"
-"������ ��� ��� �� firewall.  �������� �� �������� ����� ��� ��������� "
-"�����������\n"
-"������ ������ ������������� ����� ��� ��������!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"������� ���� ����������� web �� ���� �� �������� ��� ���������� �� ��� "
-"������\n"
-"�������� �� internet; �� ������� ���� ���������� web ��� ���� ���� �� "
-"��������\n"
-"���������� �� ��� ������, ���� �������� �� ���������� ��� �� �������� ���.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"������� name ����������� �� ���� �� ��������; �� ��� ��������� ����\n"
-"���� �� ����� IP ��� ����������� ����� �� ��� �� internet, ��������\n"
-"��������� ���.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping.��� �����\n"
-"��������������� -- ����� ������� �������� ������� �� ������� ��� ������\n"
-"��������� �� �� ��������������. To ssh ����� ��������������� ��� ��� �� "
-"��������� ����."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"������ �� ���������� ������������ ��������� telnet;\n"
-"���� ����� ������� �� �������, ���� ��������� ���� ����������� �����.\n"
-"����������� �� ���������� ��� ��� ��� �� ��������������� �� ssh ��� ���� "
-"���\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"������� ���� FTP ����������� ��� ���������� �� ����� ����������� ��� "
-"Internet;\n"
-"��� ���, ���� ����������� �� �� �������������� ��� �������� ���������. "
-"����������\n"
-"������� ��������� ���������� ��� �� FTP ������� �� ������� ��� �������� "
-"��������,\n"
-"���� �� FTP ������ ��� ������������ ������������� ��� ��� �������� ������� "
-"���������\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"������� ���� ����������� ������������ ���; ��� �������� �� \n"
-"�������� ��� ���� pine, mutt � ����� ������ ������������ ��� ��� �������,\n"
-"���� ������� �� �������.  ������ �� ������ �� �� ����������� �� firewall "
-"����.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"������� ���� POP � IMAP ����������� ���; ���� ���������������\n"
-"��� ������ ����������� ������������ �� ���������� ��� web ��� ��������� \n"
-"���� ����� ��� �����������.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"�������� ��� ������� ���� 2.2 ������.  ��� � IP ���\n"
-"����� ��������, ������ �� �� ����������� ����.  ����� ���� \n"
-"� ��������� ���;\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"������������� � ��� ��� ���������� ��� �� ����� ����������;\n"
-"�����������, ���� ��������������� ��� �������������� �����������\n"
-"�� Unix/Linux ��� �� �������������� �� logs ���.  ��� ��� ����� �����\n"
-"���� ������� �������� ��� ��� ����� ������� ��� ����, ���� ������� \n"
-"�� ��� ������ ����."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"� ������� ������������.  �� �������� ����� �� ������� ��� �����;\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "�������� ���������� %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "������ ���� �� ������� ��� %s ��� �������: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "������� Firewalling"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "�������� ����������, ������������ ������������"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "����������� ������� (�������)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, ssh server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "�������"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "������� �������� Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "�������� ��� Palm Pilot � Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "������� ��������"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domain Name ��� Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr "�������� ��������: ������������ ��������, ��������� ����� ���"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "�������� ����: mp3 � midi players, ������ ���"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "������ ��� ������ ��� �� Linux ��� �� �������� ���������"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "������� �������� KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ���"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "�������� - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "�������� ��� ������������, ���, web, �������� ������� ��� ���������"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "���� ���������"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL � MySQL database ������������"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "�������� ��� �� �������������� ��� ������� ��� ���������� ���"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "�������� - ����"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "��������"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "����������"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "�������� ��������"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "������������ ������������ Postfix, ������������ ���� Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "������� Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "������� ���������"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "������� L��"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "����������� ������� ������������ (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "�� ���������� �������� KDE �� ��� ������� ������������ ���������"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "������� ����������"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "�������� ��� ���������� ��� ������� CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "������� �������� ��������"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "������������"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ���"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "����������� �������� ���� �� Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "����������� ��������� C ��� C++, ����������� ��� ���� ������"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "������������ �������"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "������� ����������"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "����������� ������������ ��� ����������� video"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "�������� - �������"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "���������� (���������)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"�������� ��� �������� ��� ���� ������������� ��� news (pine, mutt, tin...) "
-"��� Web Browsers"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "������������, ����������, �������������"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "���������� ���������� ����������� ���������"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "������� ���������� �� ������ �������� ��� ���������"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "������� ��� ����������� ���������� ������������������� ��� ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "���� ��������"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "����������� ������������ ��� ����������� video ��� ����"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "���� ������� ������������"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "������������ ��������, ������, �������� �������, ���������"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "����������� ����������� �����������, ���� �� gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "���������� ���������� ���������"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "�������� - ������� CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "������� �������� ������������� ���������"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "�������"
-
-#, fuzzy
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "������������"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "�������� ��� ��' ������� ������:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "���������������� ���������"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "�������� ���� �� ������ ����������� ��� ��� ����� %s"
-
-#~ msgid "mount failed"
-#~ msgstr "������� �������"
-
-#~ msgid "Low"
-#~ msgstr "������"
-
-#~ msgid "Medium"
-#~ msgstr "������"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "����� ���������� ���������, � ����� ����� ��� �������� ������������ \n"
-#~ "��������������� ��� �������."
-
-#~ msgid "Boot mode"
-#~ msgstr "���������� ���������"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "��� ��������"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "�� GNU/Linux ���������� ��� ��� �� GMT (\"Greenwich Mean Time\" � \n"
-#~ "\"���������� ��� ����������\") ��� ��� ���������� �� ������ ���\n"
-#~ "����� ��� ����� ���� ��� �� ���������."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "������� ��� ��������� (internet)"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "���������� ��� �� ��������� (internet)"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "������� �������� ��� ������ (������ � ���������)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "�� ����� ����� ������ �� �������������;"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "�������� �������� �� ������ ��� ������ �� �������������"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "�����������"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "������� �������� Gnome"
-
-#~ msgid "authentification"
-#~ msgstr "�������������"
-
-#~ msgid "user"
-#~ msgstr "�������"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "�������� �������� ���� ���������."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "������"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "�������� ������� ����������� ������� �����������"
-
-#~ msgid "Active"
-#~ msgstr "������"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "���"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "���� ��������� ����� \"%s\" ����������� ��� "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "������� ������� ��������"
-
-#~ msgid "Printer Device"
-#~ msgstr "������� ��������"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "�� ������ �������� ������!"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "���������������� ������������ CUPS"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "���������������� ������������ CUPS"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "��������� ����������"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "����"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "�������� �������� ���������� �������������."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "�������� ����� ���� �� ��� ���������"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "�����: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "������������ �������� ������"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "������� �"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "������� ��������"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "�������"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "��"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "��������"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "�������� ��������..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "�������� ��������..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "� ������� ��� �������.\n"
-#~ "����������� �� �� ������ ����� ��� ���������\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "�� root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "�� ������� ��� ����� ����������� ��� ���������."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "�������� �� ������� ��� ������ �� �������������"
-
-#~ msgid "Total size: "
-#~ msgstr "�������� �������: "
-
-#~ msgid "Please wait, "
-#~ msgstr "�������� ����������, "
-
-#~ msgid "Total time "
-#~ msgstr "��������� ������ "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "�� ������������� ��� ���������� ��������� ��� �� �11;"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "�� ���� ������� ����� ������������ � ��������� ���;\n"
-#~ "(��������: �� /dev/lp0 ����������� ��� LPT1:)\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "�������, � ������������ ������� ����� ��� �����������. �� ��� "
-#~ "������������."
-
-#~ msgid "New"
-#~ msgstr "���"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "����� ���������������� �����"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "�������� ����� ���� �� ��� ���������"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "�������� (%s), �������� ������������ ��������\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ; (��' ������� %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "� ������� ���; (��' ������� %s �������� `none' ��� ������) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "�������� ���������� ��� /etc/sysconfig/autologin ��� ��������: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "������ �� �������������� �� ������;"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "����������;"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "�� ������������ ��� �������� ������� �������:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "�� ������������ ��� ������� ������� %s. ����������;"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "����� ��� �� ����� �������� ��� ��� ����� ����, � ����������� �������\n"
-#~ "����� \"/dev/hda\" (� ������ ������ ��� ����� ������), � \"/dev/sda\n"
-#~ "(� ������ SCSI ������)."
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "�������� ��� ��' ������� ������:"
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "��������� �� ������� ���."
-
-#~ msgid "Press next to continue."
-#~ msgstr "������� ������� ��� �� ����������."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "�������� �������� ������ ��� ����������� ��� �����."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "������ �� ����������� ���� ����� ��� ������ ������ ���� ���������� ��� "
-#~ "�����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "�������� �������� \"�������\" ��� ���������� �� ���� �����.\n"
-#~ "\n"
-#~ "\n"
-#~ "�������� �������� \"������\" ��� ��� ����������. � ����������� �� "
-#~ "���������� ����� ��\n"
-#~ "��������� ������."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr ""
-#~ "�������� ��� ���������� ��� ����������� ��� ������������ ������ ��� "
-#~ "�������� �����"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "��� ������ ��� ����� ������� (����� ��� ���� ��� ��������� ���� ����)\n"
-#~ "�������� �������� ��� ��� ��� �������� ��������."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "��������:\n"
-#~ "\n"
-#~ "  - �������������: ��� ����� ������������� �� �� Linux, �� ��������� �� \n"
-#~ "��������� ������ ���������� ������� ������, ���������� ��������� � "
-#~ "�����������\n"
-#~ "�������.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - �������������: ��� ����� ���� ������������� �� ��������� GNU/Linux "
-#~ "���\n"
-#~ "������ �� ���������������� ��� ���������� ������������� �����������, "
-#~ "����\n"
-#~ "���� � ������� ����� ��� ���. �� ��������� �� ��������� ���� "
-#~ "������������\n"
-#~ "���� ��� ���� �������� (\"�������������\") �������."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "�� �������� ��� ����� ������� �� ��� ����� ��� ���������� ��� \n"
-#~ "����� �� ���������:\n"
-#~ "\n"
-#~ "* ������� ��������: �������� ����� ��� ��������� �� ��������������� �� "
-#~ "�������\n"
-#~ "  ��� ������ ��� ���������� �����, ��� ����� � ��� �������. \n"
-#~ "\n"
-#~ "* ��������: �������� ���� ��� ��������� �� ��������������� �� ������� "
-#~ "���\n"
-#~ "  ������ ��� �������� ����������. �� ������������ ��� ������ ������� "
-#~ "���������\n"
-#~ "  ��� �����������, ������������� ��� ����������� ������� ������, ����� "
-#~ "���\n"
-#~ "  ���������� ������� ����������.\n"
-#~ "\n"
-#~ "* ������������: �������� ���� ��� ��������� �� ��������������� �� ������� "
-#~ "���\n"
-#~ "  �� �����������, ���� ������� (NFS � SMB), ���� ���������� (lp � SMB), "
-#~ "����\n"
-#~ "  ������������ (NIS), ����� ��������� ���. �� ����� ��� ���������, ��� "
-#~ "��\n"
-#~ "  ������������� �������� ���� �� KDE, �� Gnome ���."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "�������� ���� �� ��������� ��� ������ ������� ��� ���������� �� "
-#~ "������������� � �� ������������.\n"
-#~ "\n"
-#~ "\n"
-#~ "�� DrakX �� ������������ ��� ����� ������ ���� ���� ����� ���.\n"
-#~ "��� ���, �� ������ ��� �������������. ��� ������ �� ����������, �� "
-#~ "�������������\n"
-#~ "���� �� ����������� ������, ���� �� ���������� ������ ������ ��������� "
-#~ "�������������.\n"
-#~ "��� ���� ����� ��� ������ �������� �� ��������� \"������� ����������� "
-#~ "�������\". �� ����\n"
-#~ "�� ��������� �� ������ �� ��������� ������� �� �������� ��� 1000 ������."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "�������� ���� �� ��������� ���������� ��� �� ������ ��� ���������� \n"
-#~ "�� �������������.\n"
-#~ "\n"
-#~ "\n"
-#~ "�������� �� ���������� � �� ���������� �� ������ ����������� ��� "
-#~ "��������\n"
-#~ "���� �������� ����� ��� ��������� ��� �������.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ��������� �� �� ������� �� ������ ������������ ����������, �������\n"
-#~ "\"�������� ������������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ��� ������ �� ��������� ��������������� ��� ����������, �������\n"
-#~ "\"��������� ����������\". ��������� ��� �� ����� ��� ���������, � \n"
-#~ "���������� ���� ������� ������ �� ���������� ��� ������� ���������� \n"
-#~ "��� ����� ������� ��� ���������� ��� ����."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "��� ����� ��� �� �������� CDs, ������� Ok.\n"
-#~ "��� ��� ����� ������ ��� �� �������� CDs, ������� �������.\n"
-#~ "��� ��� ����� ������ ��� ����, ����������� �� ��� ������� Ok."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "���� �������� �� ���������� �� ������� ���. �������������� �� ������� ��� "
-#~ "�� ������ ��� ��\n"
-#~ "������������� ��� �� ��������� ����� ������. �� ��� �����, �������� �� "
-#~ "������ ���� ��� \"�����\"\n"
-#~ "��� �� ��������� ���� ���� �����.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ������ ����������� �� ��� �������� Apple �� ������� ���� ��������, �� "
-#~ "��� ����� �\n"
-#~ "��������� �� ������� ������ ������� ��� ������������� ���� �� ����������� "
-#~ "�� 2� ��� �� 3�\n"
-#~ "������ ��� ���������. ���� �� ��� ��������� �� ����� �������� ���� ����� "
-#~ "���������������\n"
-#~ "��� ��������� ���� ���� ������� ��� Linux ��� ��� ��� X Window GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "�� ����� ��� ADB �������, �������� �������� USB, ����� � ������� ��� "
-#~ "Linux �� ���������\n"
-#~ "��� �� ������� ��� ���������."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "��� ������ �� ��������� ��� ���������� ��� ��� ��������� � �� ��� "
-#~ "������ \n"
-#~ "������, �������� ����� ��� ��������� �������, ���� �������� ��� �������� "
-#~ "��� \n"
-#~ "������� ���� �� DrakX �� ��� ��������� ��������.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ��� ����� ����� �������� �������, �������� \"�������������� �������"
-#~ "\".\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ������ �� ��������� �� ������ ��������, � �� ���������� �� ��� \n"
-#~ "��������� �������, �������� \"�����\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "��� ����������� modem. �������� �������� ��� �������� ���� ���� �����\n"
-#~ "����� �����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "������������, � ����� ���� (��� ���������� \"COM1\" ��� Microsoft "
-#~ "Windows),\n"
-#~ "��� Linux ���������� \"ttyS0\"."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "�������� ���� �� ��������� ��� ��������� dial-up. ��� ��� ������ � ��� "
-#~ "�����\n"
-#~ "�������� ��� ����� ��� ���������, �������� �� ��� �������������� ��� "
-#~ "��� \n"
-#~ "������� ���. ��� ��� ������� ����������� �������� (DNS), �� ������� "
-#~ "�������� \n"
-#~ "���� ��� �������."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "��� �� modem ��� ����� ���������, �������� ������� �� ���� �� DrakX �� "
-#~ "�������� �� �� ��������� ��������."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "�������� ������� �� modem ��� ��� �������� �� �����."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "�������� ���� �� ��������� ��� ��������� dial-up. ��� ��� ������ � ��� "
-#~ "�����\n"
-#~ "�������� ��� ����� ��� ���������, �������� �� ��� �������������� ��� "
-#~ "��� \n"
-#~ "������� ���. ��� ��� ������� ����������� �������� (DNS), �� ������� "
-#~ "�������� \n"
-#~ "���� ��� �������."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "�������� ���� �� �������� �� �������� ����� (��� ����������). ��� ��� "
-#~ "����� ��������,\n"
-#~ "�������� �� �������� ����������� ��� ��� ������� ���."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "�������� ���� �� ��������� ��� ������� �������.\n"
-#~ "\n"
-#~ "  - ��������� IP: ��� ��� ��� ������, ������� ��� �������� ������� �\n"
-#~ "��� ������� ���.\n"
-#~ "��� ������ �� �������� ��������� IP ��� ��������� \"�������� ������� IP"
-#~ "\"\n"
-#~ "��������.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ����� �������: \"255.255.255.0\" ����� ������� ���� �������. ��� ���\n"
-#~ "����� ��������, ������� ��� �������� ������� � ��� ������� ���.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - �������� ������� IP: ��� �� ������ ��� ������������ ��� ��� �� "
-#~ "����������\n"
-#~ "BOOTP � DHCP, �������� ����. �� ���� ��� ���������, ��� ���������� �� "
-#~ "������\n"
-#~ "��������� IP. ��� ��� ����� ��������, ������� ��� �������� ������� �\n"
-#~ "��� ������� ���."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "�������� ���� �� �������� �� �������� ��� �����. ��� ���\n"
-#~ "����� ��������, �������������� ��� �������� �������."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "�������� ���� �� �������� �� �������� ��� �����. ��� ���\n"
-#~ "����� ��������, ������ �� ����."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "�������� ���� �� �������� ��� �������� ��� dialup. ��� ��� ����� "
-#~ "��������,\n"
-#~ "�������� �� �������� ����������� ��� ��� ������� ���."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "��� ��������������� proxies, �������� �������� ���� ����. ��� ��� "
-#~ "������,\n"
-#~ "������� ��� ������� ��� � ��� �������� �������."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "�� � ������� ��� �� �� ��������� ����� ����� ����������, �������� ��\n"
-#~ "������������� ������ �������������. ����� �������� ���� ���� ��'\n"
-#~ "���� �� ���������� �� ������ ��� ���� �������� ���� ������ ��\n"
-#~ "�������������.\n"
-#~ "\n"
-#~ "��������� ��� ������ �� ��������� ���� ��� ������ ������� �� ���\n"
-#~ "��������� ���."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "�������� ���� �� ��������� ���� ���� ������� �� ��� ��������� ���."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "�������� �� ������� ���� ������ �������� (����������� ���� ���������� "
-#~ "���) \n"
-#~ "� ���� ��������������� (���������� ���� UNIX �������, Netware � ������� \n"
-#~ "Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "��� ������ �� ����������, �������� ��� ��� �� ��� ��������� ��������� \n"
-#~ "(CUPS ��� LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "�� CUPS ����� ��� ���, ������ ��� �������� ������� ��������� ��� UNIX \n"
-#~ "���������. ���� ����� � ������ ������� ��� �� Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "�� LPR ����� �� ����� �������� ������� ���������.\n"
-#~ "\n"
-#~ "��� ��� ����� ��������, �������� \"������\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "�� GNU/Linux ������ �� ����������� �� ��������� ������ ���������. � "
-#~ "������� ���\n"
-#~ "������ ���������� ������������ ���������.\n"
-#~ "\n"
-#~ "��� � ��������� ��� ����� ������������ ��� ������� ���, �������� "
-#~ "\"�������\n"
-#~ "���������\".\n"
-#~ "\n"
-#~ "��� ������ �� ���������� �� ���� �������� ������������ �� ��������������� "
-#~ "UNIX\n"
-#~ "�������, �������� \"���������������� ���������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ������ �� ���������� �� ���� �������� ������������ �� ��������������� "
-#~ "Windows\n"
-#~ "������� (� UNIX �� SMB ����������), �������� \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "�������� ������ ��� �������� ��� ��� �� �� ���������� �� DrakX.\n"
-#~ "\n"
-#~ "������ �� �������� ������� ����������� ���.\n"
-#~ "\n"
-#~ "\n"
-#~ "...* ����� ��������: � print spooler ������������ �� \"lp\"�� �� "
-#~ "�������������� �����. �����, ������ �� ����� ���� �������� ������� \"lp"
-#~ "\".\n"
-#~ "     ��� ����� ���� ���� ��������, �������� �� ������������� ����� "
-#~ "������� ��� �����.����� �� ������ �� �� ����������� �� ��� pipe\n"
-#~ "     ��������� (��� \"|\"). �����, ��� ��������� ��� ���� ��������� "
-#~ "�����, ������ �� �� ������ �����, �.�: \"My printer|lp\".\n"
-#~ "     � ��������� ��� ���� �� \"lp\" ��� ������� ��� �� ����� � "
-#~ "��������������� ���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "...* ���������: ���� ����� ����������� ���� ������ �� ����� ������� ��� "
-#~ "������ ��������� ����� ������������ ���� ���������� ��� � �� ����������\n"
-#~ "     ������ ����������� �� ����� �������� �� ����� ��� ��������.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ���������: ��� ������ �� ������ ������� ����������� ������� �� ���\n"
-#~ "     ��������� ��� �������� ���, ����� ��� ��� (����� ��������� �� "
-#~ "������� ���\n"
-#~ "     ������, ��� ���������� \"2�� ������\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "������ �� �������� ������� ����������� ���.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ����� �����: � print spooler ������������ �� \"lp\" �� �� "
-#~ "�������������� ����� ��������. �����, ������ �� ����� ���� �������� �� �� "
-#~ "����� \"lp\".\n"
-#~ "     ��� ����� ���� ���� ��������, �������� �� ��������������� ����� "
-#~ "������� ��� �����. ���� ������ �� �� �������� �� ��� pipe\n"
-#~ "     ��������� (��� \"|\"). �����, ��� ��������� �� ����� ��� ��� "
-#~ "��������� �����, ������ �� �� ������ �����, �.�: \"My printer|lp\".\n"
-#~ "     � ��������� �� �� \"lp\" ��� ������� ��� �� ����� � ��������������� "
-#~ "���������.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * ��������� Spool: ����� ����� � ��������� ��� ������������� �� "
-#~ "�������� ��� ��������. ���������� ��� ��' ������� �������\n"
-#~ "     ��� ��� ������ �� �� ���������������\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ������� ��������: ��� � ��������� ��� ����� ������� ������������ "
-#~ "���� ���������� ���, �������� \"������� ���������\".\n"
-#~ "     ��� ������ �� ����� �������� �� ���� �������� ��� ��������� �� ��� "
-#~ "������������� Unix ��������, �������� \"�������������� lpd ���������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     ��� ������ �� ����� �������� �� ���� �������� ��� ��������� �� ��� "
-#~ "������������� Microsoft Windows �������� (� �� ��� Unix �������� �� SMB\n"
-#~ "     ����������), �������� \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     ��� ������ �� ����� �������� �� ���� �������� ��� ��������� �� ��� "
-#~ "NetWare ������, �������� \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "��� ����������� ���������. �������� �������� �� ����� ��� �������� ����\n"
-#~ " ����� ����� ������������.\n"
-#~ "\n"
-#~ "\n"
-#~ "�� ������������ ��������� ���������� ���� ����� ��������� ����. ���� "
-#~ "����������\n"
-#~ "\"/dev/lp0\" ��� GNU/Linux ��� \"LPT1\" ��� Microsoft Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "�������� ��� �������� ��� ���� �������� ��������"
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "�������� �������� ��� ���������� ��������� ��� ��� �������� ���.\n"
-#~ "�������� ��� ���������� ��� �������� ��� ��� ������ �� �� ���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "����� ��� ���������� �� �������� ��� �������� ��� ��� ������� ���� ��� "
-#~ "����� ������������� �� ��� ����������� ���� �� ������."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "�������� ���� �� ������� �� ����-������ ��� ��� ������ \"root\".\n"
-#~ "� ���� ������ �� �������� ��� ������� ��� �����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "� root ����� � ������������ ��� ���������� ��� � ����� ��� ���� \n"
-#~ "�� �������� �� ������� ��� ��������� ��� ����������. �� ����, \n"
-#~ "�������� ���������� ���� �� ���� ������! �� ��������������� \n"
-#~ "�������� ��� root ������ �� ��������������� ���������� ��� \n"
-#~ "��� ����������� ��� ���������� ��� ��� ��������� ���, ����� \n"
-#~ "��� ��� ���� ��������� ����������� �� ����. \n"
-#~ "\n"
-#~ "\n"
-#~ "� ���� ������ ������ �� ����� ��� ���� �������������� ���������� \n"
-#~ "��� �� ����� ����������� ���� (8) ����������. ��� ������ *����* \n"
-#~ "�� �� ������� �� �����."
-
-#~ msgid ""
-#~ "If your network uses the LDAP (or NIS) protocol for authentication, "
-#~ "select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "�� �� ������ ��� ����������� LDAP (� NIS) ���������� ��� ����������, "
-#~ "��������\n"
-#~ "\"LDAP\" (� \"NIS\") �� ����������. �� ��� ���������, ������� ��� "
-#~ "�����������\n"
-#~ "������� ���.\n"
-#~ "�� � ����������� ��� ��� ����� ������������ �� ������ �� �����������, "
-#~ "���� ���������� �� ������ ��\n"
-#~ "��������� \"������ ������\" ��� ����������."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "�������� ���� �� ������������� ���� � ������������� \"������\" �������,\n"
-#~ "(�� �������� �� ��� \"���������������\" ������, root). �������� �� \n"
-#~ "������������� ���� � ������������� ������� ��� ���� ������� ��� ������\n"
-#~ "�� ���� �������� ��� ������� ���. ��������� ��� ���� ������� ���� ���\n"
-#~ "����� ��� ��������� (������� ����������, ��������� ��������� ���),\n"
-#~ "����� ��� �� ���� ��� \"home directory\", ��� ����� �������������\n"
-#~ "����� �� ���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "���' �����, ������������ ���� ������ ��� ��� ����� ���! ����� ��� ���\n"
-#~ "����� � ��������� ������� ��� ����������, ��� ������ �� ��������������\n"
-#~ "�� root ��� ��� ���������� ����� ��� ����������, ����� ���� �� \n"
-#~ "������������ ���������. ��� ���� ����� �������������� ����� ������\n"
-#~ "��� �� ����������� ��� ����������� ��� ���� ��������� �� root.\n"
-#~ "\n"
-#~ "\n"
-#~ "�� ����, �� ������ �� ��������� ��� ������� ��� ��������������� ����\n"
-#~ "������ ����� ������ ��� �� ��������� �� root ���� ��� �������� ���������\n"
-#~ "��� ���������� ��� ����������."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "���������� �� ������������� ���� ����� ���������. ��� ��� \n"
-#~ "�������� �� ���������� ��� ���������� ���, ����� � ����� ������ \n"
-#~ "�� ��������� �� ������� ��� ����� ���������������."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "�� ������ �������� ��� LILO ��� ��� grub �����:\n"
-#~ "  - ������� ���������: ������ �� ����� ��� �������� (�.�. ��� \n"
-#~ "���������) ��� �������� ��� ����� ���������. ����� ��� �� �����\n"
-#~ "�������� ��� ����� ������, �������� \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ����������� ���� ��� ��������: ������ �� ������ ��� �������������\n"
-#~ "��� �� ������� �� ��������� ���� ��������� �� ����� �����������.\n"
-#~ "���� ����� ������� ������� �� ��������� ��� �������� ��� ��� �����\n"
-#~ "������ ���� ��� ������������ ��� �������������. ��� ������� �����������\n"
-#~ "��� � ������� ����������� � ����� �����.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ������� ������: ���� ������ ��� VGA ������� �������� ��� �� ��������\n"
-#~ "���� ��� ��������. �������� �� �������� ��������: \n"
-#~ "\n"
-#~ "    * normal: �������� ������� �������� 80�25.\n"
-#~ "\n"
-#~ "    * <�������>: ����� ��� ����������� �������� ��������.\n"
-#~ "\n"
-#~ "  - ���������� \"/tmp\" �� ���� ��������: ��� ������ �� ������� ��� �� "
-#~ "������ ��� ��� ��������\n"
-#~ "��� ����� ��� \"/tmp\" ���� �������� �� ������� ���, ������������� ����� "
-#~ "��� �������.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ������� RAM �� ����������: ��������, ��� ������� ���������� ������� "
-#~ "�� ����� ��\n"
-#~ "BIOS ��� ������ ������ RAM ��� ���������� ���. ��� ��������, �� Linux "
-#~ "����\n"
-#~ "�������� �� ���������� ��� RAM �����. �� ����� ��� ���������, ��������\n"
-#~ "�� ������� ��� ����� ������ ���. �������� ��������� ��� ��� ������� ��� "
-#~ "����� ��� 2 � 4\n"
-#~ "MB ������ ��� ������ ��� ����������� ��� ��� ����������� RAM ��� "
-#~ "���������� ��� ����� ��������."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "�� SILO ����� ��������� ��������� ��� SPARC: ������ �� ��������� \n"
-#~ "�� GNU/Linux � ����������� ���� ����������� ������� ��� ������� ���. "
-#~ "��������, \n"
-#~ "�� �������� ����������� ��������������� ��� ����������� �����. ��� ���� "
-#~ "��� \n"
-#~ "������, �������� �� ���������� �������� �������� �� ����� ��� �����. \n"
-#~ "�������� �� ��������� ��� ������ �����������.\n"
-#~ "\n"
-#~ "�������� ������ �� ����������� ��� �������� �� ���� ����������� ��������� "
-#~ "����������\n"
-#~ "��� ����������� ��������. �� ����� ���� ��� ���������, �� ����������� "
-#~ "�������� ���������\n"
-#~ "��� �� �� ���������������!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "�� ������ �������� ��� SILO �����:\n"
-#~ "  - ����������� bootloader: ������ �� ��� ������ �� ������������� �� "
-#~ "�����������\n"
-#~ "��� ��� �������� ��� GNU/Linux �����������. ����� �� �� ������ �� ������� "
-#~ "������,\n"
-#~ "�������� \"������ ������ ��� ������ (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ����������� ���� ��� ��������: ������ �� ������ ��� �������������\n"
-#~ "��� �� ������� �� ��������� ���� ��������� �� ����� �����������.\n"
-#~ "���� ����� ������� ������� �� ��������� ��� �������� ��� ��� �����\n"
-#~ "������ ���� ��� ������������ ��� �������������. ��� ������� �����������\n"
-#~ "��� � ������� ����������� � ����� �����."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "���� ������ �� ��������� �� X Window System, �� ����� ����� � \n"
-#~ "������� ��� �������� ������������� (GUI) ��� GNU/Linux. ������ ��\n"
-#~ "��������� ��� ����� �������� ��� ��� ����� ���. �� ����������\n"
-#~ "����� ��� ����������� ����� ����������������, ����� � �������\n"
-#~ "��� ���������� ���� ����������� ��� ������� ��� ��������� \n"
-#~ "��������� :)\n"
-#~ "\n"
-#~ "\n"
-#~ "���� ����������� � ���������� ��������, �� ��������� ��\n"
-#~ "X Window ������� (����� ��� ����� ����������� ������), ���\n"
-#~ "�� �������� ��� �� ��������� ��� �����������. ��� ���, \n"
-#~ "�������� �� ����������� ��� ��� �� ����������� ��� ���������\n"
-#~ "���� ����� ���������."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "��� ���� ��� ���� ���� �� ��� ��������� ��� �, ��������������� ����� ���\n"
-#~ "�������� ��� �� ��������� ����� �� ������� ���������� (X Window System)."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "��� ��������� �������� �� ������� ���������� �������� \"���\". ������, \n"
-#~ "�������� \"���\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "�������� �� ��������� ��� ������� ��������� ��� �� ������� ���. �������� "
-#~ "�������� �� manual ��� �������\n"
-#~ "  �����������. ������, �� ��� ������ �� �� ���������, �������� ��� "
-#~ "��������������� ��������.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "�� ������� ��� �� �������������.\n"
-#~ "\n"
-#~ "���� ��� ������������, �� ��� ��� Mandrake Linux ������� �� ���������\n"
-#~ "��������. ��� ������ �� ���������� ��� ���� ������� �����������, "
-#~ "��������\n"
-#~ "�������� ��� �������� �������."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "������� (���������������)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "��������� (���������������)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "����� ��� ������ ��� ����������:"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "��' ������� Runlevel"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "���������� /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "����������� ����"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "���� ��� ����������� ���� ��� �����������,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "��� �� �������� �� ����� ��� ����������� �� ������"
-
-#~ msgid "Reload"
-#~ msgstr "������������"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "������ �� ������������� ��� �������� ��������� ������������ ��� "
-#~ "����������� ����� ��� ������������;"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "��������� ADSL"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "����� ���������������� ����� ������!"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "��� �������� �� ������� ��� ������ ������� ���� ����� � ��������� �� "
-#~ "�������������� ���� �� ��������� ���������� ���� ��������."
-
-#~ msgid "Command line"
-#~ msgstr "������ �������"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "��� ������ ������� ������ �� ��������!"
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "�������� �� ����� ��� �������� ��� ������"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "�� ����������� ��� ������� ��������� ��� ������� �� ������������"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "�� ������������ ������ ���������"
-
-#~ msgid "Adapter"
-#~ msgstr "Adapter"
-
-#~ msgid "Disable network"
-#~ msgstr "�������������� �������"
-
-#~ msgid "Enable network"
-#~ msgstr "������������ �������"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "�������� �������"
-
-#~ msgid "Profile "
-#~ msgstr "������ "
-
-#~ msgid "Statistics"
-#~ msgstr "����������"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "�������� ���������: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "�������� �����: "
-
-#~ msgid "Logs"
-#~ msgstr "Logs"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "������� ��� ��������� (internet)"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "���������� ��� �� ��������� (internet)"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "���������� ��� �� ��������� (internet) �������."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "���������� ��� �� ��������� (internet) ������������"
-
-#~ msgid "Connection complete."
-#~ msgstr "� ������� ������������"
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "� ������� �������.\n"
-#~ "������������ ��� ��������� ��� ��� ������ ������� Mandrake."
-
-#~ msgid "sent: "
-#~ msgstr "������������: "
-
-#~ msgid "received: "
-#~ msgstr "���������: "
-
-#~ msgid "average"
-#~ msgstr "����� ����"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "�������� ���� �� ���������� �� ������� ���. ��������� �� ������� ��� ��\n"
-#~ "������ ��� ����������� ��� ��� ����������� ���� ������. �� ���, ��������\n"
-#~ "\"�������\" ��� �������� ����� �����."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "������� DSL (� ADSL)"
-
-#~ msgid "Choose"
-#~ msgstr "�������"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "�������� �� ������ ���������� �� URI ��� �������� ���� �������� ���� CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "���, ������ ����������� ������ ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "���, ������ ����������� ������ PostScrip"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "���, ������ ��� ��� ��� ������������ �������"
-
-#~ msgid "Paper Size"
-#~ msgstr "������� �������"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "������� ������� �� �� ����� ��� ���������;"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "�������� ������ Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "�������� ������ ��������"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "�������� �������� ��� PostScript;"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "�������� ��������-������;"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "������� ������� ��� ������� ������"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "��������/����� ��������� �� ������� (1/72 ��� ������)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "����/���� ��������� �� ������� (1/72 ��� ������)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "�������� �������� GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "�������� �������� ��������"
-
-#~ msgid "Reverse page order"
-#~ msgstr "���������� ����� �������;"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "������ �������� ���������������� ��������"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "�� ��� ����� ����������� CUPS, ��� ���������� �� ��������� ��������� \n"
-#~ "���. �� ��������� �� ������������� ��������. �� ����� ���������, "
-#~ "��������\n"
-#~ "\"����������� CUPS\"."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "���� ���������  ���������� ��� ����� (��� ���������� lp). ������� ������ "
-#~ "�� \n"
-#~ "�������� ����� ���������� ���� ��������� � � ���������. �� ����� �� \n"
-#~ "����� �� ����� ��� �������� ��� ��� ����� ������������ � ���������;"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "���� ���� �������� (���� ����� ���������� �� ����������) ����������\n"
-#~ "��� ����� (����� lp) ��� ���� ��������. �� ����� ��� �������� �� \n"
-#~ "����� �� ����� ��� ���� �������� ��� ��� ����� ������������ � ���������;"
-
-#~ msgid "Name of queue"
-#~ msgstr "����� �����"
-
-#~ msgid "Spool directory"
-#~ msgstr "���������"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2"
diff --git a/perl-install/share/po/eo.po b/perl-install/share/po/eo.po
deleted file mode 100644
index 431df175c..000000000
--- a/perl-install/share/po/eo.po
+++ /dev/null
@@ -1,11770 +0,0 @@
-#
-# MESA�OJ DE DrakX
-# D. Dale Gulledge <dsplat@rochester.rr.com>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-08-02 22:36-0500\n"
-"Last-Translator: D. Dale Gulledge <dsplat@rochester.rr.com>\n"
-"Language-Team: Esperanto <eo@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-3\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Plur-ekrana konfigura�o"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafika karto"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Elektu grafikan karton"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Elektu X servilon"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X servilo"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Elektu X servilon"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X servilo"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kiun konfiguron de XFree vi deziras havi?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Vi povas havi 3D aparatan akceladan subtenon kun XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s kun 3D aparata akcelado"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"NOTU KE �I TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN KOMPUTILON."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s kun EKSPERIMENTA 3D aparata akcelado"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"NOTU KE �I TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN "
-"KOMPUTILON.\n"
-"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree Konfigurado"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Elektu memorkapaciton de via grafika karto"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Elektu opciojn por servilo"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Elektu ekranon"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Ekrano"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"La du gravegaj parametroj estas la vertikala refre�igrapido (vertical\n"
-"refresh rate) kiu estas la rapido por refre�igi la tutan ekranon, kaj\n"
-"plej grave la horizontala sinkronrapido (horizontal sync rate), kiu estas\n"
-"la rapido por montri skanliniojn.\n"
-"\n"
-"�i estas TRE GRAVA ke vi ne elektas specon de ekrano kiu havas\n"
-"sinkronamplekson kiu estas preter la kapabloj de via ekrano: vi eble\n"
-"difektus vian ekranon.  Se vi dubas, elektu zorgeman opcion."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontala sinkronrapido (horizontal sync rate)"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikala refre�igrapido (vertical refresh rate)"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Ekrano ne estas konfigurata"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafika karto ne jam konfigurita"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Vi ne jam elektas distingivojn"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "�u vi deziras provi la konfigura�on?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Averto: provado de �i tiu grafika karto eble svenigos vian komputilon"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Provu konfigura�on"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"penu �an�i iom da parametroj"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Eraro okazis:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Mi eliros post %d sekundoj"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "�u tio �i pravas?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Eraro okazis, penu �an�i iom da parametroj"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Distingivo"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Elektu distingivon kaj kolorprofundon"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafika karto: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 servilo: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Plu"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Jeso"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Spertula Modalo"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Montru tuton"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Distingivoj"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavara aran�o: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Speco de muso: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Musaparato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ekrano: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Ekrana horizontala sinkronrapido (horizontal sync rate): %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Ekrana vertikala refre�igrapido (vertical refresh rate): %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafika karto: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafika karto: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Graifka memoro: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kolorprofuneco: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Distingivo: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 servilo: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 pelilo: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Preparas X-Fenestran konfigura�on"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Kion vi deziras fari?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "�an�u Ekranon"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "�an�u Grafika karto"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "�an�u Servilajn opciojn"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "�an�u distingivon"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Montru informon"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Provu denove"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "�esu"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"�u vi deziras teni la �an�ojn?\n"
-"Nuna konfiguro estas:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X Fenestro �e komenco"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mi povas konfiguri vian komputilon tiel ke �i a�tomate lan�os X kiam �i\n"
-"ekfunkcias.  �u vi deziras ke X a�tomate lan�os?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Bonvolu resaluti en %s-n por aktivigi la �an�ojn."
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Bonvole adia�u kaj sekve uzu Kontrol-Alt-Retropa�o (Ctrl-Alt-Backspace)."
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 koloroj (8 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil koloroj (15 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil koloroj (16 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milionoj koloroj (24 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardoj koloroj (32 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB a� pli"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Normala VGA, 640x480 �e 60 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Supera VGA, 800x600 �e 56 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr ""
-"8514 kongrua karto, 1024x768 �e 87 hercoj (Hz) interplektita (neniu 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr ""
-"Supera VGA, 1024x768 �e 87 hercoj (Hz) interplektita, 800x600 �e 56 hercoj"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Etendita Supera VGA, 800x600 �e 60 hercoj (Hz), 640x480 �e 72 hercoj"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr ""
-"Neinterplektita Supera VGA, 1024x768 �e 60 hercoj (Hz), 640x480 �e 72 hercoj"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Altfrekvenca Supera VGA, 1024x768 �e 70 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Plurfrekvenca kiu povas fari 1024x768 �e 60 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Plurfrekvenca kiu povas fari 1280x1024 �e 74 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Plurfrekvenca kiu povas fari 1280x1024 �e 76 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ekrano kiu povas fari 1600x1200 �e 70 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ekrano kiu povas fari 1600x1200 �e 76 hercoj (Hz)"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Unua sektoro de starta subdisko"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Unu sektoro de drajvo (�efStartRikordo)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO Instalado"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kie vi deziras instali la start�argilon?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub Instalado"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Start�argilo �efaj opcioj"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Start�argilo por uzi"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Start�argila instalado"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Starta aparato"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne funkcias kun malnovaj BIOSoj)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakta"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakta"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Grafika re�imo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Prokrastoperiodo anta� starti defa�ltan sistemon"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Pasvorto"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Pasvorto (denove)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Limigu komandliniajn opciojn"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "limigu"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Purigu /tmp dum �iuj startadoj"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Preciza kvanto de memoro se bezonata (trovis %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Ebligu multoblajn profilojn"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Donu kvanton de memoro en MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcio ``Limigu komandliniajn opciojn'' ne estas utila sen pasvorto"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Bonvole provu denove"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "La pasvortoj ne egalas"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Defa�lta Mastruma Sistemo?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Jen la diversaj enskriboj.\n"
-"Vi povas aldoni pli a� �an�i la ekzistantajn."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Aldonu"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Finata"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "�an�u"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Kiun specon de enskribo vi deziras aldoni"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linukso"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Alia Mastruma Sistemo (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Alia Mastruma Sistemo (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Alia Mastruma Sistemo (Vindozo...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Kerna bildo"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Radiko"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Alfiksu"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lega-skriba"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabelo"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Dan�era"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etikedo"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Defa�lta"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-grandeco"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Forigu enskribon"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Malplena etikedo ne estas permesata"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Vi devas havi inter�an�an subdiskon"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "�i tiu etikedo estas jam uzata"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Trovis %s %s interfacojn"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "�u vi havas alian?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "�u vi havas iun %s interfacon?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Jes"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Vidu hardvaran informon"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalas pelilon por %s karto %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kiun %s pelilon devus mi provi?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Iuokaze, la %s pelilo bezonas havi aldonan informon por �uste funkcii,\n"
-"kvankam �i normale funkcias bone sen la informo.  �u vi deziras specifi\n"
-"aldonajn opciojn por �i a� permesi al la pelilo esplori vian komputilon\n"
-"por la informo �i bezonas?  Kelkfoje, esplori svenas komputilon, sed\n"
-"�i ne devus ka�zi difekton."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "A�tomate esploru"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Specifu opciojn"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nun vi povas provizi �iajn opciojn al modulo %s.\n"
-"Opcioj estas en la formo ``nomo=valoro nomo2=valoro2 ...''.\n"
-"Ekzemple, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modulaj opcioj:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"�argado de modulo %s malsukcesis.\n"
-"�u vi deziras trovi denove kun aliaj parametroj?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(jam aldonis %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "�i tiu pasvorto estas tro simpla"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Bonvole donu salutnomon"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Salutnomo devas enhavi nur minusklojn, ciferojn, `-' kaj `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "�i tiu salutnomo estas jam aldonita"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Aldonu uzanto"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Enigu uzanton\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Akceptu uzanto"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Vera nomo"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Salutnomo"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "�elo"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Piktogramo"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "A�tomata-enregistrado"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mi povas konfiguri vian komputilon por a�tomate enregistri unu uzulon kiam\n"
-"�i startas.  Se vi ne deziras uzi �i tion, alklaku la `Nuligu' butonon."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Elektu la defa�ltan uzulon:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Elektu la fenestro-administrilon por lan�i:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malanta� la instalado"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "�iuj"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Aldonu uzulon"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Akomodata"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS startas"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"�i tiu paka�o devus esti promociata.\n"
-"�u vi certas ke vi deziras malelekti �in?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Nuligu"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bonvenon Al Rompistoj"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Malbona"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "La�norma"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alta"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Alta"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoja"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"vi devus uzi �i tiun nivelon zorge. �i faras vian komputilon pli facila\n"
-"por uzi, sed delikatega: vi devus neniam uzi �i surrete.\n"
-"�i ne havas pasvortojn."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Pasvortoj nun estas ebligataj, sed uzado kiel reta komputilo estas ankora�\n"
-"ne rekomendita."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"�i tiu estas la normala sekureco rekomendata por komputilo kiu estos uzata\n"
-"por konekti al la Interreto kiel kliento.  Nun estas sekurecaj kontroloj."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Kun �i tiu sekurnivelo, uzado de �i tiu komputilo kiel servilo ebli�as.\n"
-"La sekureco nun estas sufi�e alta por uzi la sistemon kiel servilo kiu\n"
-"akceptas konektojn de multaj klientoj."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Ni uzas aspektojn de la kvara nivelo, sed nun la komputilo estas tute\n"
-"malfermita.  Sekurecaj aspektoj estas �e iliaj maksimumoj."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Elektu sekurnivelon?"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Elektas sekurnivelon"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Elektu opciojn por servilo"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bonvenon al %s, la mastruma sistema elektilo!\n"
-"\n"
-"Elektu mastruman sistemon de la supra listo a�\n"
-"atendu dum %d sekundoj por defa�lta starto.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bonvenon al GRUB la elektilo por mastrumaj sistemoj!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Uzu la %c kaj %c klavoj por elekti kiun enskribon estas emfazata."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Premu la enenklavon por starti la elektatan mastruman sistemon, 'e' por\n"
-"redakti la"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ordonoj antaux startado, aux 'c' por uzi komandan linion."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "La emfazata enskribo startos auxtomate post %d sekundoj."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "mankas sufi�e da spaco en /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kie vi deziras instali la start�argilon?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Dosiero"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Dosiero/_Eliru"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>E"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NovStila Ekrano"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicia Ekrano"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicia Gtk+ Ekrano"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modalo"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modalo"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfiguru"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistema modalo"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Jes"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutoj"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundoj"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Mi ne povas aldoni plu da subdiskoj"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malanta� la instalado"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Franca"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belga"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Germana"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Greka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norvega"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Sveda"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Itala"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "seria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Bonvolu fari rezervan kopion de via dateno anta�e"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Legu zorge"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se vi intencas uzi \"aboot\", zorgu lasi liberan spacon (2048 sektoroj "
-"sufi�as)\n"
-"�e la komenco de la disko"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Eraro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Sor�isto"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Elektu agon"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Vi havas unu grandan FAT subdiskon.\n"
-"(�enerale uzata de MicroSoft DOS/Vindozo).\n"
-"Mi sugestas ke vi unue regrandecigi tiun subdiskon\n"
-"(klaku sur �in, kaj poste klaku sur \"Regrandecigu\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Bonvolu klaki sur subdiskon"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detaloj"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "2a Etendata (Ext2)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "Dosierlokigtabelo (FAT)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "muntado malsukcesis"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Inter�an�a"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Malplena"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Alia"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Specoj de dosiersistemoj:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Kreu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Uzu ``%s'' anstata�e"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Forigu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Uzu ``Malmuntu'' anta�e"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi �an�as la specon de subdisko %s, �iuj datenoj en �i tiu subdisko "
-"estos\n"
-"perdata"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Elektu agon"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Kreu novan subdiskon"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "2a Etendata (Ext2)"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "�an�u al Spertula re�imo"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "�an�u al Normala re�imo"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Malfaru"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "�u mi devus da�ri malgra�e?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "�u eliru sen konservi"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "�u eliru sen skribi la subdisktabelon?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "�u vi deziras provi la konfigura�on?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "A�tomate disponigu"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Forvi�u �ion"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Detektado de fiksdisko(j)"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "�iuj el la subdiskoj estas uzata"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Mi ne povas aldoni plu da subdiskoj"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Por havi plu da subdiskoj, bonvole forigu unu por povi krei etendigitan\n"
-"subdiskon"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Skribu subdiskotabelon"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Sava subdiskotabelo"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Sava subdiskotabelo"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Sava subdiskotabelo"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "A�tomata muntado de demetebla medio"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Elektu dosieron"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La rezerva subdisktabelo ne estas la sama grandeco\n"
-"�u da�ras tamen?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Averto"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"En�ovu disketon en drajvo\n"
-"�iuj datenoj sur tiu disketo estos perdata"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Provas savi subdisktabelon"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Montru informon"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Surmetingo"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcioj"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Regrandecigu"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Movu"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatu"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Muntu"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Aldonu al RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Aldonu al LVM (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Malmuntu"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Forigu de RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Forigu de LVM (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "�an�u RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Uzu por retrokonektado"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Kreu novan subdiskon"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Komenca sektoro: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Grandeco en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Speco de dosiersistemo: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Surmetingo: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Prefero: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatas retrokonektan dosieron %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "�an�u subdiskspecon"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Kiun dosierosistemo vi deziras uzi?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kie vi deziras munti retrokonektan dosieron %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kie vi deziras munti aparato %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne povas malfiksi surmetingon �ar �i tiu subdisko estas uzata por\n"
-"retrokonektado.  Unue forigu la retrokonektadon."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Kalkulas FAT dosiersistemajn limojn"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Regrandecigas"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "�i tiu subdisko ne estas regrandecigebla"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "�iuj datenoj en �i tiu subdisko devus esti rezervata"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi regrandecigas subdiskon %s, �iuj datenoj en �i tiu subdisko estos\n"
-"perdata"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Elektu la novan grandecon"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Grandeco en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Al kiu disko vi deziras movi?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektoro"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Al kiu sektoro vi deziras movi?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Movante"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Movas subdisko..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nova"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr ""
-"Elektu ekzistantan RAID (Redundanca Aro de Malmultekostaj Diskoj) por\n"
-"aldoni al"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Vi ne povas uzi �i tiun subdiskon por retrokonektado"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Retrokonektado"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Retrokonekta dosieronomo: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Vera nomo"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Alia retrokonektado jam uzas tiun dosieron, elektu alian"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Dosiero jam ekzistas.  �u vi deziras uzi �in?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Modulaj opcioj:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "aparato"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivelo"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "grandeco de pecoj"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Zorgu: �i tiu operacio estas dan�era."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Kiun specon de subdiskado?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Beda�rinde mi ne kreas /boot tiom longe sur la drajvon (�e cilindro > "
-"1024).\n"
-"A� vi uzos LILO kaj �i ne funkcios, a� vi ne uzos LILO kaj vi ne bezonas\n"
-"/boot."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La subdiskon vi elektis por aldoni kiel la radiko (root, /) estas fizike\n"
-"situanta preter la 1024a cilindro de la drajvo, kaj vi ne havas /boot\n"
-"subdiskon.  Se vi intencas uzi la LILO startadministranto, zorgu aldoni\n"
-"/boot subdiskon."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Vi elektis softvaran RAID-an subdiskon por la radika dosiersistemo (/).\n"
-"Neniu start�argilo povas trakti tiun sen /boot subdisko.\n"
-"Do zorgu aldoni /boot subdiskon."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "La subdisktabelo de drajvo %s estos skribata al disko!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Vi bezonos restarti anta� ol la �an�o povas efektivi�i"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi formatas la subdiskon %s, �iuj datenoj en �i tiu subdisko estos\n"
-"perdata"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatas"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatas retrokonektan dosieron %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatas subdiskon %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid malsukcesis"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Mankas sufi�an da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Mankas sufi�an da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Distingivo: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Aparato: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-a diskingolitero: %s (nur konjekto)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Speco: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nomo: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Komenco: sektoro %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Grandeco: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektoroj"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "De cilindro %d al cilindro %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatita\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Ne formatita\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Muntita\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID (Redundanca Aro de Malmultekostaj Diskoj) md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Retrokonekta(j) dosiero(j): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Subdisko startata defa�lte\n"
-"    (por MS-DOS starto, ne por \"lilo\")\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivelo %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Grandeco de pecoj %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Retrokonekta dosieronomo: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Grandeco: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrio: %s cilindroj, %s kapoj, %s sektoroj\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informo: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Subdiskotabelospeco: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "�e buso %d identiga�o %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcioj: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Speco de dosiersistemo: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"�i tiu pasvorto ests tro simpla (�i devas esti almena� %d signoj longa)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "La pasvortoj ne egalas"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "�an�u subdiskspecon"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Bonvolu klaki sur subdiskon"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNA servilo"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatado de %s malsukcesis"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ne scias kiel formati %s kiel speco %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "eraro dum malmunti %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simpla"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servilo"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Vi ne povas uzi JFS por subdisko pli malgranda ol 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Vi ne povas uzi ReiserFS por subdisko pli malgranda ol 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Surmetingoj devas komenci kun anta�a /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jam estas subdisko kun surmetingo �e %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "�i tiu dosierujo devus resti interne de la radika dosierosistemo (/)"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "Vi bezonas veran dosiersistemon (ext2, reiserfs) por tiu surmetingo\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Vi bezonas veran dosiersistemon (ext2, reiserfs) por tiu surmetingo\n"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Mankas sufi�an da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Eraro dum malfermado de %s por skribi: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Eraro okazis - neniuj validaj aparatoj estis trovata sur kiuj vi povas krei "
-"novajn dosiersistemojn.  Bonvolu kontroli vian ekipa�on por la ka�zo de �i "
-"tiu problemo."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Vi ne havas iujn ajn subdiskojn!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Nun vi povas elekti kiujn servojn vi deziras starti kiam vi startas\n"
-"vian komputilon.  Kiam via muso estas supre de ero, malgranda balono\n"
-"ekaperas por helpi vin.  �i priskribas la rolon de la servo.\n"
-"\n"
-"Zorgegu en �i tiu pa�o se vi intencas uzi vian komputilon kiel servilo:\n"
-"ne startu servojn kiujn vi ne deziras uzi."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Bonvolu elekti la �ustan pordon.  Ekzemple, la COM1-a\n"
-"pordo sub MS Vindozo estas nomata ttyS0 sub GNU/Linukso."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (la Linuksa �argilo) kaj Grub estas start�argiloj: ili povas starti\n"
-"a� GNU/Linukson a� iun ajn mastruman sistemon �eestanta �e via komputilo.\n"
-"Normale, �i tiuj aliaj mastrumaj sistemoj estas �uste detektata kaj\n"
-"instalada.  Se tiel ne estas, vi povas aldoni enskribon mane per �i tiu\n"
-"ekrano.  Zorgu elekti la �ustajn parametrojn.\n"
-"\n"
-"\n"
-"Eble vi anka� ne deziras doni atingon al �i tiuj aliaj mastrumaj sistemoj\n"
-"al iu ajn.  �iokaze vi povas forstreki la respondajn enskribojn.  Sed\n"
-"�iokaze, vi bezonos startdiskon por starti ilin!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Vi bezonas indiki kie vi deziras meti la informon postulata\n"
-"por starti GNU/Linukson.\n"
-"\n"
-"\n"
-"Krom se vi scias precize kion vi faras, elektu \"Unua sektoro de\n"
-"drajvo (MBR)\""
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX provos ser�i PCI-a(j)n SCSI-a(j)n adaptilo(j)n\n"
-"Se DrakX trovas SCSI-an adaptilon kaj scias kiun pelilon �i devas uzi\n"
-"�i a�tomate instalos �in (a� ilin).\n"
-"\n"
-"Se vi havas neniom da SCSI-aj adaptiloj, ISA-an SCSI-an adapilon, a�\n"
-"PCI-an SCSI-an adaptilon kiun DrakX ne rekonas DrakX demandos al vi\n"
-"se vi havas SCSI-an adaptilon sur via komputilo.  Se vi ne havas adaptilon\n"
-"vi povas nur klaki 'Ne'.  Se vi klakos 'Jes', DrakX montros al vi liston de\n"
-"peliloj.  Vi povos elekti vian specifan pelilon de la listo.\n"
-"\n"
-"\n"
-"Se vi devas permane elekti vian adaptilon, DrakX demandos\n"
-"�u vi deziras specifi opciojn por �i.  Vi devus permesi al DrakX\n"
-"esplori la aparaton por la opcioj.  �i tiu kutime bone funkcias.\n"
-"\n"
-"Se ne, vi bezonos provizi opciojn al la pelilo.\n"
-"Reviziu la Instalgvidlibron por sugestoj pri ekstrakado de �i tiu\n"
-"informo de Vindozo (se vi havas �in sur via komputilo),\n"
-"de dokumenta�o de aparato, a� de la TTT-ejo de la fabrikanto\n"
-"(se vi havas atingon al la reto)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "En�ovu disketon en drajvo %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Eraro legante dosiero %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Iuj aparatoj sur via komputilo bezonas \"proprietajn\" pelilojn por "
-"funkcii.\n"
-"Vi povas trovi iun informon pri ili �e: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Vi devas havi radikan subdiskon.\n"
-"Por �i tiu, kreu subdiskon (a� klaku estantan).\n"
-"Sekve elektu la agon \"Surmetingo\" kaj faru �in '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Vi devas havi inter�an�an subdiskon"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Vi ne havas inter�an�an subdiskon\n"
-"\n"
-"�u vi deziras da�ri tamen?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Vi devas havi inter�an�an subdiskon"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Uzu liberan spacon"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Mankas sufi�an da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Uzu ekzistantajn subdiskojn"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Ne ekzistas subdiskojn por uzi"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Uzu la Vindoza subdiskon por retrokonektado"
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kiun subdiskon vi deziras uzi por meti Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Elektu la grandecojn"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Radikosubdiska grandeco en MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Inter�an�a subdiska grandeco en MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Uzu la liberan spacon sur la Vindoza subdisko"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kiun subdiskon vi deziras regrandecigi?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Kalkulas Vindozajn dosiersistemajn limojn"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"La regrandecigilo por la FAT (Dosiero-Atingo-Tablo) ne povas trakti\n"
-"vian subdiskon, la sekvanta eraro okazis: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Via Vindoza subdisko estas tro fragmentigata, bonvole uzu ``defrag'' anta�e"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"AVERTO!\n"
-"\n"
-"DrakX nun regrandecigas vian Vindozan subdiskon.  Zorgu: �i tiu operacio "
-"estas\n"
-"dan�era.  Se vi ne jam faris �in, vi devus anta�e eliru el la instalado, "
-"uzi\n"
-"\"scandisk\" sub Vindozo (kaj la�vole \"defrag\"), kaj sekve relan�u la\n"
-"instaladon.  Anka� vi devus fari rezervan kopion de via dateno.\n"
-"Kiam vi estas certa, klaku \"Jeso\"."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Kiun grandecon vi deziras teni por Vindozo?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "subdisko: %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Regrandeci�o de FAT malsukcesis: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ne ekzistas FAT-ajn (Dosiero-Atingo-Tablo) subdiskojn por regrandecigi\n"
-"a� uzi kiel retrokonektaj subdiskoj (a� ne estas sufi�a da spaco)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Forvi�u la tutan diskon"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Forigu Vindozon"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Vi havas pli ol unu fiksdisko, sur kiu vi deziras instali Linukson?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"�iuj ekzistantaj subdiskoj kaj iliaj datenoj estos perdata sur drajvo %s"
-
-#: ../../install_interactive.pm_.c:190
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Uzu ekzistantajn subdiskojn"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Uzu fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Nun vi povas dispartigi %s.\n"
-"Kiam vi fini�os, ne forgesu savi kun `w'."
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Uzu la liberan spacon sur la Vindoza subdisko"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Mi ne povas aldoni plu da subdiskoj"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "La Dispartigsor�ilo de DrakX trovis �i tiujn solvojn:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Dispartigado malsukcesis: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Startado de la reto"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Haltas de la reto"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Eraro okazis, sed mi ne scias kiel trakti �in bone.\n"
-"Da�ri je via propra risko."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duobla surmetingo %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Iuj gravaj paka�oj ne estis ta�ge instalata.\n"
-"A� via KDROM drajvo a� via KDROM disko estas difektita.\n"
-"Kontrolu la KDROM sur instalata komputilo per\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bonvenon al %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Neniu disketilo havebla"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Eniras pa�on `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Via sistemo havas malmulte da risurcoj.  Eble vi havos problemojn pri\n"
-"instali Linuks-Mandrejkon.  Se tio okazos, vi povos anstata� provi tekstan\n"
-"instaladon.  Por �i tio, premu `F1' kiam vi startas de KDROM, kaj sekve\n"
-"tajpu `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Instalklaso"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Bonvole, elektu unu el la sekvantaj specoj de instalado:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "La totala grandeco de la grupoj vi elektis estas proksimume %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se vi volas instali malpli ol �i tiu grandeco,\n"
-"elektu la procenton el la paka�oj kiuj vi deziras instali.\n"
-"\n"
-"Malalta procento instalos nur la plej gravajn paka�ojn;\n"
-"100%% instalos �iujn paka�ojn."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Vi havas spacon �e via disko por nur %d%% da �i tiuj paka�oj.\n"
-"\n"
-"Se vi deziras instali malpli ol tiom,\n"
-"elektu la procenton el la paka�oj kiun vi deziras instali.\n"
-"Malalta procento instalos nur la plej gravajn paka�ojn;\n"
-"%d%% instalos tiom paka�ojn kiom eblajn."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Vi povos elekti ilin pli precize en la sekvanta pa�o."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procento da paka�oj por instali"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Elektado de Paka�aj Grupoj"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Elektado de individuaj paka�oj"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tuta grandeco: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Malbona paka�o"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nomo: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versio: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Grandeco: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Graveco: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Vi ne povas elekti �i tiun paka�on �ar ne estas sufi�e da spaco por instali\n"
-"�in."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "La sekvaj paka�oj estos instalataj"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "La sekvaj paka�oj estos malinstalataj"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Vi ne povas elektu/malelektu �i tiun paka�on"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "�i tiu estas deviga paka�o, vi ne povas malelekti �in"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Vi ne povas malelekti �i tiun paka�on.  �i estas jam instalita."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"�i tiu paka�o devus esti promociata.\n"
-"�u vi certas ke vi deziras malelekti �in?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Vi ne povas malelekti �i tiun paka�on.  �i devus esti promociata."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalu"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "�argu/Konservu sur disketo"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Elektado de individuaj paka�oj"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Eliru instalprogramon"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Elektu la paka�ojn kiuj vi deziras instali"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalanta"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Taksas"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tempo restanta "
-
-#: ../../install_steps_gtk.pm_.c:528
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Preparas instaladon"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paka�oj"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalanta paka�o %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Akceptu"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Malakceptu"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"�an�u vian KDROM!\n"
-"\n"
-"Bonvole, en�ovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
-"\"\n"
-"kiam vi finos.\n"
-"Se vi ne havas �in, klaku \"Nuligu\" por eviti la instaladon de �i tiu KDROM."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "�u vi deziras da�ri tamen?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Estis eraro ordigi paka�ojn:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Estis eraro dum instalado de paka�oj:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Eraro okazis"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "�u vi deziras provi la konfigura�on?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licenca kontrakto"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klavaro"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Bonvole, elektu vian klavaran aran�on."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Kiun instalklaso deziras vi?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalu/�isdatigu"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "�u tiu �i estas instalado a� �isdatigado?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Rekomendata"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Spertulo"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "�isdatigu"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Elektado de individuaj paka�oj"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Muspordo"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfiguras PCMCIA kartojn..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfiguras IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "neniuj haveblaj subdiskoj"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Elektu surmetingojn"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Mi ne povas legi vian subdisktabelon, �i estas tro difektita por mi :(\n"
-"Mi povas peni da�ri per blankigi difektitajn subdiskojn (�IOM DA DATUMO\n"
-"pereos!).  La alia solvo estas malpermesi al DrakX �an�i la subdisktabelon.\n"
-"(la eraro estas %s)\n"
-"\n"
-"�u vi konsentas perdi �iujn subdiskojn?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake malsukcesis �uste legi la subdisktabelon.\n"
-"Da�ri je via propra risko!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Radikosubdisko"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Kiu estas la radikosubdisko (/) �e via sistemo?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Vi bezonas restarti por la �an�oj al la subdisktabelo efektivigi"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "�u kontrolas malbonajn blokojn?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatas subdiskojn"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreas kaj formatas dosieron %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nesufi�a inter�an�ospaco por plenumi instalado, bonvolu aldoni iom"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Ser�as haveblajn paka�ojn"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Trovadas paka�ojn por promocii"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Via komputilo ne havas sufi�e da spaco por instalado a� promocio (%d > %d)."
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Kompleta (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimuma (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Rekomendata (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "�argu de disketo"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "�argas de disketo"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Elektado de Paka�oj"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "En�ovu disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Konservu sur disketo"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se vi havas �iujn de la KDROM-oj en la listo sube, klaku \"Jes\".\n"
-"Se vi havas neniujn de �i tiuj KDROM-oj, klaku \"Nuligu\".\n"
-"Se vi mankas nur iujn de la KDROM-oj, malelektu ilin, kaj poste klaku \"Jes"
-"\"."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "KDROM etikedata \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Preparas instaladon"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalas paka�o %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "En�ovu disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "En�ovu malplenan disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Nun vi havas la �ancon el�uti softvaron por �ifrado.\n"
-"\n"
-"AVERTO:\n"
-"\n"
-"Pro malsamaj �eneralaj kondi�oj aplikeblaj al �i tiu softvaro kaj trudata\n"
-"de diversaj jurisdikcioj, la kliento kaj/a� fina uzanto de tiu softvaro\n"
-"devus certigi ke la le�oj de lia/ilia jurisdikcio permesas li/ili el�uti,\n"
-"stoki kaj/a� uzi tiun softvaron.\n"
-"\n"
-"Plue, la kliento kaj/a� fina uzanto scios specife atentos ne malobei la\n"
-"le�ojn de lia/ilia jurisdikcio.  Se la kliento kaj/a� la fina uzanto\n"
-"malobeas tiujn aplikeblajn le�ojn, li/ili altiros sur sin gravajn "
-"sankciojn.\n"
-"\n"
-"Neniuokaze a� Mandrakesoft a� �iaj fabrikistoj responsigos por specialaj,\n"
-"nerektaj a� hazardaj reparacioj kiuj ajn (inkluzive, sed ne limigite al\n"
-"perdo de profitoj, interrompo de komerco, perdo de komerca dateno kaj\n"
-"aliaj monaj malprofitoj, kaj rezultaj �uldoj kaj indemizo pagenda konforme\n"
-"al priju�o) rezulte el uzado, posedado, a� sole el�utado de tiu softvaro, "
-"al\n"
-"kiu la kliento kaj/a� fina uzanto ne povis atingi post subskribi la nunan\n"
-"kontrakton.\n"
-"\n"
-"Por iuj demandoj rilate al tiu kontrakto, bonvole demandu de\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Kontaktu la spegulon por havigi la liston de havebla paka�oj"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Elektu spegulon de kiu havigi la paka�ojn"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kontaktu la spegulon por havigi la liston de havebla paka�oj"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "kio estas vian horzonon?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "�u via hardvara horlo�o estas �ustigata en GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Servilo"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Malproksima CUPS-a servilo"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Neniu printilo"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "�u vi havas alian?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Muso"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printilo"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN-karto"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Sonkarto"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokaj dosieroj"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Difinu pasvorton de root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Neniu pasvorto"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"�i tiu pasvorto ests tro simpla (�i devas esti almena� %d signoj longa)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "A�tentikigado"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "A�tentikiga LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Servilo"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "A�tentikiga NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS Domajno"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Servilo"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
-"sendepende de la normala start�argilo.  �i tiu estas utila se vi ne deziras\n"
-"instali SILO sur via sistemo, a� alia mastruma sistemo forigas SILO,\n"
-"a� SILO ne funkcias kun via aparato-konfigura�o.  Akomodita startdisketo "
-"anka�\n"
-"povas esti uzata kun la Mandrejka savdisko, kiu plifaciligas resani�i de\n"
-"severaj sistemaj paneoj.\n"
-"\n"
-"Se vi deziras krei startdisketon por via sistemo, en�ovu disketon en la\n"
-"unua drajvo kaj klaku \"JES\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Unua disketa drajvo"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Dua disketa drajvo"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Ellasu"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
-"sendepende de la normala start�argilo.  �i tiu estas utila se vi ne deziras\n"
-"instali LILO (a� grub) sur via sistemo, a� alia mastruma sistemo forigas "
-"LILO,\n"
-"a� LILO ne funkcias kun via komputilo.  Akomodita startdisketo anka� povas\n"
-"esti uzata kun la Mandrejka savdisko, kiu plifaciligas resani�i de severaj\n"
-"sistemaj paneoj.  �u vi deziras krei startdisketo por via sistemo?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Beda�rinde, neniu disketdrajvo havebla"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Elektu la disketdrajvo vi deziras uzi por krei la startdisketon"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "En�ovu disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Kreas startdisketon"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Preparas start�argilon"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "�u vi deziras uzi aboot-on?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Eraro da�re mi instalis \"aboot\",\n"
-"�u mi devus provi perforte instali e� se tio detruas la unuan subdiskon?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instalu restart-�argilon"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalado de start�argilo malsukcesis.  La sekvanta eraro okazis:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "En�ovu malplenan disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Kreas a�toinstalan disketon"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Kreu a�toinstalan disketon"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "A�tomata"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Reludu"
-
-#: ../../install_steps_interactive.pm_.c:1364
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Elektado de individuaj paka�oj"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Linuks-Mandrejka Instalado %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr "  <Tabo>/<Alt-Tabo> inter eroj | <Spaco> elektas | <F12> sekva ekrano "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu mankas"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Elektu agon"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Bonvole atendu"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informo"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Etendu Arbon"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Maletendu Arbon"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "�an�u inter ebena kaj ordigita je grupoj"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Malbona elekta�o, provu denove\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Via elekta�o? (defa�lo estas %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Via elekta�o? (defa�lo estas %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opcioj: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "�u vi deziras uzi aboot-on?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Via elekta�o? (defa�lo estas %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "�e�a (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Germana"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak-a"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Hispana"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finna"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Franca"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norvega"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Pola"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rusa"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sveda"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Unui�inta Regna klavaro"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Usona klavaro"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albana"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armena (malnova)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armena (skribma�ina)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armena (fonetika)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaj�ana (latina)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armena (fonetika)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgara"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazila (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusa"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Svisa (germana aran�o)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Svisa (franca aran�o)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "�e�a (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Germana (neniom da mortaj klavoj)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dana"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak-a (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak-a (Norvega)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak-a (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estona"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Kartvela (\"Rusa\" aran�o)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Kartvela (\"Latina\" aran�o)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Greka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hungara"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israela"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israela (fonetika)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Irana"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islanda"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Itala"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japana 106 klavoj"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korea klavaro"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinamerika"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litova AZERTY-a (malnova)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litova AZERTY-a (nova)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litova \"numero-vica\" QWERTY-a"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litova \"fonetika\" QWERTY-a"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Loko"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedona"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Nederlanda"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Pola (qwerty aran�o)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Pola (qwertz aran�o)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugala"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Kebeka)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumana (qwertz-a)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumana (qwerty-a)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rusa (Yawerty-a)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovena"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaka (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaj�ana (cirila)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabelo"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Taja klavaro"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Taja klavaro"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turka (tradicia \"F\" modelo)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turka (moderna \"Q\" modelo)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrajna"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Usona klavaro (internacia)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnama \"numero-vica\" QWERTY-a"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslava (latina/cirila)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirklaj surmetingoj %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Muso"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Lo�iteka MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Nespecifa PS2 RadoMuso"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 butona"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Nespecifa 2 Butona Muso"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Genera"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rado"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seria"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Nespecifa 3 Butona Muso"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Mikrosofta IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Lo�iteka MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Lo�iteka CC serio"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Lo�iteka MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Serio"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Lo�iteka Muso (seria, malnova C7 speco)"
-
-#: ../../mouse.pm_.c:66
-#, fuzzy
-msgid "busmouse"
-msgstr "Neniu Muso"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 butonoj"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 butonoj"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "neniu"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Neniu Muso"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Bonvole, provu la muson"
-
-#: ../../mouse.pm_.c:500
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Bonvole, provu la muson"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVU VIAN RADON!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finu"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Sekvanta ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Anta�a"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "�u tio �i pravas?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Konektu al la Interreto"
-
-#: ../../network/adsl.pm_.c:20
-#, fuzzy
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La plej ofte uzata maniero por konekti kun ADSL estas dhcp + pppoe.\n"
-"Tamen, ekzistas konektojn kiuj nur uzas dhcp.\n"
-"Se vi ne scias, elektu 'uzu pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "uzu dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "uzu pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "uzu pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Kiun dhcp-an klienton vi deziras uzi?\n"
-"La defa�lto estas dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-#, fuzzy
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Mi ne detektas eterretan retadaptilom sur via sistemo.  Bonvole lan�u la\n"
-"aparatokonfigurilon."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Elektu la retan interfacon"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Bonvole elektu kiun retadaptilon vi deziras uzi por konekti al la interreto"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "neniu retkarto trovita"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfiguras reto"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Bonvole enigu vian po�tejon se vi scias �in.\n"
-"Iuj DHCP-aj serviloj bezonas po�tejon por funkcii.\n"
-"Via po�tejo devus esti plene specifita po�tejo,\n"
-"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Po�tejo"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "ISDN-a Konfigura�on"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Interna ISDN-karto"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interna ISDN-karto"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kia estas via ISDN-a konekta�o?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Konfigura�o de barilo detektata!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Konfigura�o de barilo detektata!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN-a Konfigura�on"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Elektu vian interretprovizanton.\n"
-" Se �in ne estas en la listo, elektu Nelisti�itan"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protokolo"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "E�ropo (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "La cetero de la mondo"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"La cetero de la mondo \n"
-" neniom da D-Kanelo (lukontraktataj lineoj)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Kiun protokolon vi deziras uzi?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Kiun specon de karto vi havas?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Mi ne scias"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se via havas ISA-an karton, la valoro sur la sekvanta ekrano devus esti "
-"�usta.\n"
-"\n"
-"Se vi havas PCMCIA-an karton, vi bezonas scii la IRQ-o kaj I/O (Eneligo)\n"
-"por via karto.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "�esigu"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "�u mi devus da�ri?"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Kiu estas via ISDN-a karto?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Mi detektis ISDN-an PCI-an Karton, sed mi ne scias la specon.  Bonvole "
-"elektu\n"
-"unu el la PCI-aj kartojn sur la sekvanta ekrano."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Neniu ISDN-a PCI-a karto trovata.  Bonvole elektu unu el la PCI-aj kartojn "
-"sur\n"
-"la sekvanta ekrano."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Telefon-konektaj opcioj"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nomo de konekto"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonnumero"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Salutnomo"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP (Pasvorta A�tentikigada Protokolo)"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Programeto-bazata"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Finaparato-bazata"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domajna nomo"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Unu DNS-a Servilo (nedeviga)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Du DNS-a Servilo (nedeviga)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Konfiguru interretan konekta�on"
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Konektu al la Interreto / Konfiguru lokan Reton"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Konektu"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Malkonektu"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Konfiguru retumon"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Interreta konekta�o kaj konfiguro"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Konfiguru interretan konekta�on"
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr "Konfiguru interretan konekta�on"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Reta Konfigura�o"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Elektu la defa�ltan uzulon:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detektas aparatojn..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Konfiguru interretan konekta�on"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Duobla surmetingo %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Konfiguru interretan konekta�on"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN Konfigura�o"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy, c-format
-msgid "detected on interface %s"
-msgstr "Reta interfaco"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "Cable connection"
-msgstr "Konfiguru interretan konekta�on"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Konfiguru interretan konekta�on"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN Konfigura�o"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Elektu la ilon kiun vi deziras instali"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "�u vi deziras starti vian konekta�on je startado de la sistemo?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Reta Konfigura�o"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "�u vi deziras provi la konfigura�on?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-#, fuzzy
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"AVERTO: �i tiu aparato estis anta�e konfigurata por konekti al la "
-"Interreto.\n"
-"Simple klaki JES por teni la konfiguron de �i tiu aparato.\n"
-"Se vi modifos la subajn kampojn, vi �an�os �i tiun konfiguron."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Bonvole enigu la IP-an konfigur�jon por �i tiu komputilo.\n"
-"�iu ero devus esti enigata kiel IP-adreson en punktita-decimala notacio\n"
-"(ekzemple, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfiguras retan aparaton %s"
-
-#: ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "XFree86 pelilo: %s\n"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-adreso"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Retmasko"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "A�tomata IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Bonvole enigu vian po�tejon.\n"
-"Via po�tejo devus esti plene specifita po�tejo,\n"
-"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''.\n"
-"Vi anka� povas enigi la IP-adreson de la prokura kluzo se via havas unu."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNA servilo"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Prokura kluzaparato"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Konfigurado de prokuraj serviloj"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP prokura servilo"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP prokura servilo"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Prokura servilo devus esti http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Prokura servilo devus esti ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "�u vi deziras provi konekti al la interreto nun?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Konfiguru interretan konekta�on"
-
-#: ../../network/tools.pm_.c:50
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Konektu al la Interreto / Konfiguru lokan Reton"
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konfigurado de Konekto"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Bonvole plenigu a� marku la suban kampon"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ de Karto"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memoro de Karto (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "I/O (Eneligo) de Karto"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "I/O 0 (Eneligo 0) de Karto"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "I/O 1 (Eneligo 1) de Karto"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Via persona telefonnumero"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nomo de interretprovizanto (ekz-e provizanto.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefonnumero de interretprovizanto"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Provizanto DNS 1 (nedeviga)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Provizanto DNS 2 (nedeviga)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Elektu vian klavaron"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Diskuma modalo"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Speco de konekto"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Speco de konekto"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Konta Salutnomo (uzula nomo)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Konta Pasvorto"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "muntado malsukcesis: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "�i tiu platformo ne subtenas etendatajn subdiskojn"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Vi havas truon en via subdisktabelo sed mi ne povas uzi �in.\n"
-"La sola solvo estas movi viajn �efajn subdiskojn por situigi la truon\n"
-"apud la etendataj subdiskoj."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Resta�ris el dosiero %s malsukcesis: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Eraro skribante al dosiero %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "havenda"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "grava(j)"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "tre agrabla(j)"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "agrabla(j)"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "elbe"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Loka printilo"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Malproksima printilo"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Malproksima CUPS-a servilo"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Malproksimaj lpd servilo"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Reta Printilo (TCP/ingo)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Vindozo 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Printservilo"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Printila Aparato URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Loka printilo"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Malproksima printilo"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Eraro skribante al dosiero %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modulo %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP de SMB servilo"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Defa�lta)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Elektu Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kiel estas la printilo konektata?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Kun malproksima CUPS servilo, vi ne devas konfiguri iun printilon\n"
-"�i tie; printiloj estos a�tomate dektektataj.  Se vi havas dubojn,\n"
-"elektu \"Malproksima CUPS servilo\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "LAN Konfigura�o"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Malproksima CUPS-a servilo"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "IP de SMB servilo"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Pordo"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Detektas aparatojn..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Provu pordojn"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Neniu printilo"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Loka printilo"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Duobla surmetingo %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Printila Aparato URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Loka printilo"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Printila Aparato URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instalanta paka�o %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instalanta paka�o %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Malproksimaj lpd Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Por uzi malproksima lpd printvico, vi devas provizi la po�tejon de la\n"
-"printservilo kaj la printviconomon �e tiu servilo en kiun taskoj devus\n"
-"esti metata."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Malproksima po�tejo"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Malproksima po�tejo"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Malproksima po�tejo"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Vindozo 9x/NT) Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Por printi al SMB-a printilo, vi devas provizi la SMB po�tejon (Notu! �i "
-"eble\n"
-"estas malsama de �ia TCP/IP nomo!) kaj eble la IP-adreson de la "
-"printservilo,\n"
-"aldone al la opuzan nomon de la printilo vi deziras atingi kaj iun ajn\n"
-"ta�gan salutnomon, pasvorton, kaj laborgrupan informon."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Po�tejo de SMB servilo"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP de SMB servilo"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Opuza nomo"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Laborgrupo"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Por print al NetWare printilo, vi devas provizi la NetWare printservilan\n"
-"nomon (Notu! �i eble estas malsama de �ia TCP/IP nomo!) aldone al la\n"
-"printvican nomon por la printilo vi deziras atingi kaj iun ajn ta�gan\n"
-"salutnomon kaj pasvorton."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printservilo"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Printvica Nomo"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Ing-Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Por printi al inga printilo, vi bezonas provizi la\n"
-"po�tejon de la printilo kaj opcie la pordnumeron."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Printilaj Po�tejo"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Printilaj Po�tejo"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Printila Aparato URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nomo de printilo"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Priskribo"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Loko"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "�u tio �i pravas?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Kiun specon de printilo vi havas?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "�u vi deziras provi printado?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Provu pordojn"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Jes, printu amba� de la provpa�ojn"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Printilo"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "La�norma"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Printas provpa�o(j)n..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Printas provpa�o(j)n..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Printas provpa�o(j)n..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Printas provpa�o(j)n..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Provpa�o(j)n estis sendataj al la printila demono.\n"
-"�i tiu eble postulas iom da tempo anta� ol la printilo komencas.\n"
-"Printada stato:\n"
-"%s\n"
-"\n"
-"�u �i �uste funkcias?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Provpa�o(j)n estis sendataj al la printila demono.\n"
-"�i tiu eble postulas iom da tempo anta� ol la printilo komencas.\n"
-"�u �i �uste funkcias?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Neniu printilo"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Malfermu"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Haltas de la reto"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Haltas de la reto"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Printilaj opcioj"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Neniu printilo"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Startas vian konekta�on..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Konfiguru retumon"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Ekrano ne estas konfigurata"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfiguras reto"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Alta"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoja"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Elektu Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfiguru Printilon"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instalanta paka�o %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Printilaj opcioj"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Konfiguru Printilon"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "�u vi deziras konfiguri printilon?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Printilo"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Jen la sekvantaj printvicoj.\n"
-"Vi povas aldoni pli a� �an�i la ekzistantajn."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Jen la sekvantaj printvicoj.\n"
-"Vi povas aldoni pli a� �an�i la ekzistantajn."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Konfiguru retumon"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normala Modalo"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "�u vi deziras provi la konfigura�on?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "�u vi deziras provi la konfigura�on?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Printas provpa�o(j)n..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "�u vi deziras provi la konfigura�on?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Loka printilo"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "�u vi deziras provi la konfigura�on?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Konfigurado de prokuraj serviloj"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "porto"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Prokura servilo devus esti http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Prokura servilo devus esti ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "A�tomata-enregistrado"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "pasvorto"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Neniu pasvorto"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "La pasvortoj ne egalas.  Provu denove!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne povas aldoni subdiskon al _formatita_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ne povas skribi dosieron %s."
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid malsukcesis"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid malsukcesis (eble raidtools mankas)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ne estas sufi�aj subdiskoj por RAID nivelo %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, perioda ordonvicigilo."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd estas uzata por monitori la bateriostaton kaj registri �in en la\n"
-"sistemlogdosiero (syslog).  Vi anka� povas uzi �in por halti la komputilon\n"
-"kiam la baterio�argo estas malgranda."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Lan�as ordonojn vicigitajn per la 'at' ordono je la horo specifita kiam\n"
-"'at' estis uzata, kaj lan�as ba�ajn ordonojn kiam la �argmezo estas\n"
-"sufi�e malgranda."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron estas norma Uniksa programo kiu lan�as programojn kiujn la uzulo\n"
-"specifas je periodaj tempoj.  vixie cron aldonas kelkajn trajtojn al la\n"
-"baza Uniksa cron, inkluzive de pli bona sekureco kaj pli fortaj\n"
-"konfiguraj opcioj."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM aldonas subtenon por musoj al teksta-re�imaj Linuksaj aplikoj ekzemple\n"
-"la 'Midnight Commander' (Meznokta Estro).  Anka� �i permesas uzi la muson\n"
-"por transpo�igi �e la konzolo (Sen X Fenestroj)."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache estas Tut-Tera Teksa�a servilo.  �i liveras HTML-ajn dosierojn\n"
-"kaj CGI (komunakluza interfaco)."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"La interreta superservila demono (kutime nomata inetd) lan�as sortimenton\n"
-"da aliaj interretaj servoj la�bezone.  �i respondas por la lan�o de multaj\n"
-"servoj, inkluzive de telnet, ftp, rsh, kaj rlogin.  Se vi mal�altas inetd,\n"
-"ve mal�altas �iujn el la servoj por kiuj �i respondas."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"�i tiu paka�o �argas la elektitan klavarmapon la� /etc/sysconfig/keyboard.\n"
-"Vi povas elekti �i tion per la kbdconfig utilprogramo.  Vi lasus �i tion\n"
-"ebligatan por la plejmulto da sistemoj."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd estas la printvica dajmono bezonata por lpr ta�ge funkcii.  �i estas\n"
-"baze servilo kiu arbitracias printajn taskojn al printilo(j)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"'named' (BIND) estas Domajna NomServilo (DNS) kiun vi uzas por trovi\n"
-"po�tejojn de IP adresoj."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Muntas kaj malmuntas �iujn RetDosierSistemajn (NFS), SMB (Lan\n"
-"Manager/Vindozaj), kaj NCP (NetWare) surmetingojn."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"�altas/Mal�altas �iujn retajn interfacojn konfiguratajn por lan�i\n"
-"dum sistemstartado."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
-"�i tiu servo provizas NFS dosier�losado, kiun vi konfiguras per la\n"
-"/etc/exports dosiero."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
-"�i tiu servo provizas NFS dosier�losado."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA subteno kutime estas subteno de a�o kiel ethernet kaj modemoj en\n"
-"tekkomputiloj.  �i ne estos lan�ata krom se vi konfiguras �i por ke �i\n"
-"estu sendan�era �e komputiloj kiuj ne bezonas �in."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"La pordmapilo direktas RPC konektojn, kiujn protokoloj kiel NFS kaj NIS "
-"uzas.\n"
-"La pordmapservilo devas esti uzata �e komputiloj kiuj agas kiel serviloj\n"
-"por protokoloj kiuj uzas la RPC mekanismon."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"\"Postfix\" estas Po�tTransportPerilo, kiu estas la programo kiu movas\n"
-"retpo�ton de unu komputilo al alia."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Savas kaj resta�ras sisteman entropikomuna�on por pli altkvalita\n"
-"generado de aleatoraj nombroj."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"La routed dajmono permesas a�tomatan �isdatigon de la IP enkursigila tabelo\n"
-"per la RIP protokolo.  Kvankam RIP estas vaste uzata je malgrandaj retoj,\n"
-"pli malsimplaj enkursigaj protokoloj estas bezonataj por malsimplaj retoj."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"La rstat protokolo permesas al uzuloj sur reto ekstrakti metrikojn\n"
-"pri la rapideco de iu ajn komputilo sur tiu reto."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"La ruser protokolo permesas al uzuloj sur reto identigi kiujn estas\n"
-"konektataj �e aliaj respondantaj komputiloj."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"La rwho protokolo permesas al uzuloj havigi liston de �iuj el la uzuloj\n"
-"konektataj �e komputilo kiu estas uzanta la rwho dajmono (simila al finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog (sistemlogilo) estas la rimedo per kiu multaj dajmonoj registras\n"
-"mesa�ojn al diversaj sistemlogdosieroj.  �i estas bona ideo �iam uzi\n"
-"syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Startas kaj �esigas la X Tiparan Servilon je starttempo kaj �esiga tempo."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Printilo"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Interreto"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Sistema modalo"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Malproksimaj lpd Printilaj Opcioj"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Datumbazoj"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "Servilo"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Averto"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Alfiksu"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Stato:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektoro"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "La cetero de la mondo"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Interreto"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Plurmedia - Grafiko"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-#, fuzzy
-msgid "Development"
-msgstr "Programisto"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Konekti al la interreto"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Reta interfaco"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Po�tejo de SMB servilo"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Ludoj"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Spertulo"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalanta paka�o %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Mi ne povas legi vian subdisktabelon, �i estas tro difektita por mi :(\n"
-"Mi penos da�ri per blankigi difektitajn subdiskojn"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Eraro"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Post-instala konfigurado"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratulojn!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalu"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Aldonu uzulon"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatas retrokonektan dosieron %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Elektado de Paka�oj"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Bonvole, elektu la paka�ojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Malinstalu printvicon"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Forigu Vindozon"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Salutnomo"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Bonvole, provu la muson"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Bonvole provu denove"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Bonvole provu denove"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Neniu pasvorto"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN Konfigura�o"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Elektu Printilan Konekton"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Bonvole, elektu vian klavaran aran�on."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Bonvolu klaki sur subdiskon"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Bonvole, elektu la paka�ojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Bonvole, provu la muson"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Reta interfaco"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Salutnomo"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Bonvole, elektu la paka�ojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Detektado de fiksdisko(j)"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Salutnomo"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Rado"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Rado"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Modulaj opcioj:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Reta Konfigura�o"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Bonvole, elektu la paka�ojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Bonvole, elektu la paka�ojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Dosiersistemo konfiguro"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcioj"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Reta Konfigura�o"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Resta�ru de disketo"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Alia"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instalu sistemon"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Resta�ru de dosiero"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Resta�ru de dosiero"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Akomodata"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Helpo"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Anta�a"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Stato:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Resta�ru de dosiero"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Sekvanta ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Elektu paka�ojn"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Konservu en dosiero"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Bonvole, provu la muson"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Bonvole, elektu la paka�ojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Reta Konfigura�o"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Reta Konfigura�o"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "LAN Konfigura�o"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "LAN Konfigura�o"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Dosiersistemo konfiguro"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalado de %s malsukcesis.  La sekvanta eraro okazis:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "neniu retkarto trovita"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Finata"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Preparas instaladon"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "limigu"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "limigu"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatu subdiskojn"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "LAN Konfigura�o"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Surmetingo"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Oficejo"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "�esigu"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Printilo"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instalu sistemon"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Elektu dosieron"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Malproksima printilo"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalu"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Eliru instalprogramon"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: ../../standalone/drakgw_.c:139
-#, fuzzy
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "malebligu"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "forsendu"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "rekonfiguru"
-
-#: ../../standalone/drakgw_.c:146
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Detektas aparatojn..."
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-
-#: ../../standalone/drakgw_.c:164
-#, fuzzy
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "ebligu"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Nun kiam via Interreta konekto estas konfigurata,\n"
-"vi povas konfiguri vian komputilon por disdividi �ian Interretan konekton.\n"
-"Notu: vi bezonas dedi�an Retadaptilon por konfiguri Lokan Reton (LAN).\n"
-"\n"
-"�u vi deziras konfiguri Disdividadon de Interreta Konekto?\n"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfaco %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Mi ne detektas eterretan retadaptilom sur via sistemo.  Bonvole lan�u la\n"
-"aparatokonfigurilon."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Reta interfaco"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Ekzitas nur unu konfigurita retadaptilo sur via sistemo:\n"
-"\n"
-"%s\n"
-"\n"
-"�u vi deziras konfiguri vian Lokan Reton (LAN) kun �i tiu adaptilo?"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Bonvole elektu kiun retadaptilon estos konektata al via Loka Reto (LAN)."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Ekrano ne estas konfigurata"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Post-instala konfigurado"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP de SMB servilo"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Ebla konflikto pri Loka-Reta adreso trovata en nuna konfiguro de %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Konfigura�o de barilo detektata!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Averto.  Ekzistanta konfigura�o de barilo detektata.  Vi eble devas permane\n"
-"fiksi �in poste de la instalado."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Mi konfiguras..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Mi konfiguras komandodosierojn, instalas programojn, startas servilojn..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemoj instalante paka�on %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-#, fuzzy
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:690
-#, fuzzy
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Interreta konekta�o kaj konfiguro"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ISDN-a Konfigura�on"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-#, fuzzy
-msgid "Profile: "
-msgstr "muntado malsukcesis: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Po�tejo: "
-
-#: ../../standalone/draknet_.c:168
-#, fuzzy
-msgid "Internet access"
-msgstr "Interreto"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Speco:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Kluzo:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-#, fuzzy
-msgid "Interface:"
-msgstr "Interreto"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Stato:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Konfiguru servojn"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN Konfigura�o"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Pelilo"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfaco"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokolo"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Stato:"
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Konfiguru lokan reton"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Sor�isto..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Apliku"
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Provu konfigura�on"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Konektita"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Ne konektita"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Konektu..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Malkonektu..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN Konfigura�o"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptilo %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Aktiva"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Aktiva"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Interreta konekta�o kaj konfiguro"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Interreta konekta�o kaj konfiguro"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Speco de konekto"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Kluzo"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Elektas sekurnivelon"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Konekti al la interreto"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Elektu la ilon kiun vi deziras instali"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanada (Kebeka)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "E�ropo"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islanda"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "E�ropo"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "seria"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uzado: keyboarddrake [--expert] [klavaro]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Bonvole, elektu vian klavaran aran�on."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "�an�u KD-ROM-on"
-
-#: ../../standalone/livedrake_.c:25
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"�an�u vian KDROM!\n"
-"\n"
-"Bonvole, en�ovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
-"\"\n"
-"kiam vi finos.\n"
-"Se vi ne havas �in, klaku \"Nuligu\" por eviti la instaladon de �i tiu KDROM."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Montru nur por �i tiu tago"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Dosiero/_Nova"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Dosiero/_Malfermu"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>M"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Dosiero/_Savu"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Dosiero/Savu _Kiel"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Dosiero/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcioj"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcioj/Provu"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Helpo"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Helpo/_Pri..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-iso8859-3,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-iso8859-3,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Salutnomo"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "mesa�oj"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "sistema logdosiero (syslog)"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "ser�u"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Ilo por vidi vian logdosieron"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Konfigura�oj"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "konformanta(j)"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "sed ne konformanta(j)"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Elektu dosieron"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalendaro"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Enhavoj de la dosiero"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "bonvole atendu, mi vortanalizas la dosieron: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Konfigura�on"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "2a Etendata (Ext2)"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "Servilo"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatas"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Savu Kiel..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "neniu serial_usb (seria USB) trovita\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "�u vi deziras emuli trian musbutonon?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Elektu grafikan karton"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Starta aparato"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Konfigura�o de barilo"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Konfigura�o de barilo"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Elektu vian lingvon"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Elektu instalklason"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detektado de fiksdisko(j)"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfiguru muson"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Elektu vian klavaron"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Dosiersistemo konfiguro"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatu subdiskojn"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Elektu paka�ojn"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalu sistemon"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Aldonu uzulon"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfiguru retumon"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfiguru servojn"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instalu restart-�argilon"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Kreu pra�argdisketon"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfiguru X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instalu sistemon"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Eliru instalprogramon"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ne povis malfermi %s por skribi: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Konfigura�o de barilo"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Preparas instaladon"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "TTT/FTP"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Reta Printilo (ingo)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oficejo"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnoma Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Plurmedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Database"
-msgstr "Datumbazoj"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "�u vi deziras provi la konfigura�on?"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Plurmedia - Sono"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentaro"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Interreta Konfigurado"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Plurmedia - Sono"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN Konfigura�o"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servilo"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C kaj C++ programadaj bibliotekoj, programoj kaj �apdosieroj"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Reta Printilo (ingo)"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Dokumentaro"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Plurmedia - Grafiko"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Interreto"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redaktiloj, �eloj, dosieriloj, terminaloj"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Plurmedia - KD-ROM Kreado"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Laborstacio"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "�esigu"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "Finata"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Elektu la defa�ltan uzulon:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Malproksima printilo"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Nun vi povas provizi �iajn opciojn al modulo %s."
-
-#~ msgid "mount failed"
-#~ msgstr "muntado malsukcesis"
-
-#~ msgid "Low"
-#~ msgstr "Malalta"
-
-#~ msgid "Medium"
-#~ msgstr "Meza"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Malmultaj plibonigoj �e �i tiu sekurnivelo, la �efa estas ke �i havas "
-#~ "pli\n"
-#~ "multajn sekurecajn avertojn kaj kontrolojn."
-
-#~ msgid "Boot mode"
-#~ msgstr "Starta modalo"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Spertulo"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linukso administras tempon en GMT a� \"Grenvi�a Meza Tempo\" kaj "
-#~ "tradukas �in\n"
-#~ "en lokan tempon la� la horzono vi elektis."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Konektu al la Interreto"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Malkonektu el la Interreto"
-
-#, fuzzy
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Konfiguru interretan konekta�on"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Al kiu disko vi deziras movi?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Bonvole, elektu la paka�ojn kiujn vi deziras instali."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Informo"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnoma Laborstacio"
-
-#~ msgid "authentification"
-#~ msgstr "a�tentikigado"
-
-#~ msgid "user"
-#~ msgstr "uzanto"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Bonvole, elektu la specon de via muso."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "�esu"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "A�tomata muntado de demetebla medio"
-
-#~ msgid "Active"
-#~ msgstr "Aktiva"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Ne"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Printilo, tipo \"%s\", estas detektita �e "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Loka Printila Aparato"
-
-#~ msgid "Printer Device"
-#~ msgstr "Printila Aparato"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Malproksima CUPS-a servilo"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Malproksima CUPS-a servilo"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linukso"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Sistema modalo"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Alia"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Bonvole, elektu vian klavaran aran�on."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Bonvolu klaki sur subdiskon"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Speco: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Malbona rezerva dosiero"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Konfiguru X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Printila Aparato"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Nuligu"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Jeso"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Malfermu"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Startas vian konekta�on..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Fermas vian konekta�on..."
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Elektu la grandecon kiu vi deziras instali"
-
-#~ msgid "Total size: "
-#~ msgstr "Tuta grandeco: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Bonvolu atendi"
-
-#~ msgid "Total time "
-#~ msgstr "Tuta tempo "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Uzu ekzistantan konfiguron de X11 (X-fenestroj)?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Al kiu aparato estas via printilo konektata\n"
-#~ "(notu ke /dev/lp0 egalas LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#, fuzzy
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Averto, la retadaptilo estas jam konfigurata.\n"
-#~ "�u vi deziras rekonfiguri �in?"
-
-#~ msgid "New"
-#~ msgstr "Nova"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Malproksima printvico"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Bonvolu klaki sur subdiskon"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Ambigueco (%s), esti pli preciza\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (defa�lto estas %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Via elekta�o (defa�lto estas %s  enigu `neniu' por elekti neniu) "
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "�u vi deziras provi la konfigura�on?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "�u vi konsentas?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "�u vi deziras provi la konfigura�on?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "�u vi deziras provi la konfigura�on?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Krom se vi scias precize alie, la kutima elekto estas \"/dev/hda\"\n"
-#~ " (unua �efa IDE-a disko) a� \"/dev/sda\" (unua SCSI-a disko)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Speco de konekto"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Elektu la defa�ltan uzulon:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Bonvole, provu la muson"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "Bonvole elektu vian preferatan lingvon por instalado kaj sistema uzado."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Elektu la aran�on de via klavaro el la listo supre"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Elektu:\n"
-#~ "\n"
-#~ "  - Akomodata: Se vi sufi�e konas GNU/Linukson, vi povas elektu la �efan\n"
-#~ "    uzadon por via komputilo.  Vidu malanta�e por detaloj.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Spertulo: �i tio supoza ke vi flue konas GNU/Linukson kaj deziras "
-#~ "fari\n"
-#~ "    treege akomodatan instaladon.  Simile kiel \"Akomodata\" instalado, "
-#~ "vi povos\n"
-#~ "    elekti la uzado por via komputilo.\n"
-#~ "    Sed bonvolege, NE ELEKTU �I TION KROM SE VI SCIAS KION VI FARAS!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Nun vi devas elekti la uzadon por via komputilo.  Jen la elektoj:\n"
-#~ "\n"
-#~ "* Laborstacio: �i tio estas la ideala opcio se vi intencas uzi vian\n"
-#~ "  komputilon �efe por �iutaga uzado �e la oficejo a� hejme.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Programado: se vi intencas uzi vian komputilon �efe por programado,\n"
-#~ "  �i tio estas bona opcio.  Vi havos plenan aron de programiloj por\n"
-#~ "  kompili, erarser�i, formati programfontojn, kaj krei\n"
-#~ "  programpaka�ojn.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Servilo: se vi intencas uzi �i tiun komputilon kiel servilo, �i tio\n"
-#~ "  estas bona opcio.  A� dosierservilo (NFS a� SMB), printservilo\n"
-#~ "  (Uniksa stilo a� Mikrosofta Vindoza stilo), a�tentikada servilo\n"
-#~ "  (NIS), a� datumbaza servilo, ktp.  Kiel tia, ne atendu umojn (KDE,\n"
-#~ "  GNOME, ktp.) estas instalotaj."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Nun vi povas elekti la paka�aron kiun vi deziras instali a� promocii.\n"
-#~ "\n"
-#~ "Tiam DrakX kontrolos �u vi havas sufi�e da spaco por instali �iujn de "
-#~ "ili.\n"
-#~ "Se ne, �i informas vin pir �i.  Se vi deziras anta�eniri malgra�e, �i\n"
-#~ "anta�eniros je la instalado de �iuj de la elektitaj paka�aroj sed lasos\n"
-#~ "fali iujn paka�ojn kiujn estas malpli interesaj.  Suben de la listo vi\n"
-#~ "povas elekti la opcion \"Elektado de apartaj paka�oj\"; �iokaze vi devus\n"
-#~ "foliumi tra pli ol 1000 paka�oj..."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Se vi havas �iujn de la KDROM-oj en la listo sube, klaku \"Jes\".\n"
-#~ "Se vi havas neniujn de �i tiuj KDROM-oj, klaku \"Nuligu\".\n"
-#~ "Se vi mankas nur iujn de la KDROM-oj, malelektu ilin, kaj poste klaku "
-#~ "\"Jes\"."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Nun vi povas enigi telefon-konektajn opciojn.  Se vi ne estas certa kio "
-#~ "enigi,\n"
-#~ "vi povas havigi la �ustan informon de via interretprovizanto."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Enigu:\n"
-#~ "\n"
-#~ "  - IP-adreson: Se vi ne scias, demandu al via retadministranto.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Retmaskon: \"255.255.255.0\" �enerale estas bona elekta�o.  Se vi ne\n"
-#~ "estas certa, demandu al via retadministranto a� interretprovizanto.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - A�tomata IP-adreson: Se via reto uzas BOOTP-an a� DHCP-an "
-#~ "protokolon,\n"
-#~ "elektu �i tiun opcion.  Se elektita, neniu valoro estas bezonata en\n"
-#~ "\"IP-adreson\".  Se vi ne estas certa, demandu al via retadministranto\n"
-#~ "a� interretprovizanto.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Se via reto uzas NIS, elektu \"Uzu NIS\".  Se vi ne scias, demandu al "
-#~ "via\n"
-#~ "retadministranto."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Nun vi povas enigi telefon-konektajn opciojn.  Se vi ne estas certa kio "
-#~ "enigi,\n"
-#~ "vi povas havigi la �ustan informon de via interretprovizanto."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Se vi uzos prokurajn servilojn, bonvolu konfiguri ilin nune.  Se vi ne\n"
-#~ "scias �u vi uzos prokurajn servilojn, demandu al via retadministranto a�\n"
-#~ "interretprovizanto."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Vi povas instali kriptografian paka�on se via interreta konekto estas "
-#~ "�uste\n"
-#~ "pretigita.  Unue elektu spegulon de kie vi deziras el�uti paka�ojn kaj "
-#~ "poste\n"
-#~ "elektu la paka�ojn por instali.\n"
-#~ "\n"
-#~ "Notu ke vi devas elekti spegulon kaj kriptografiajn paka�ojn la� la "
-#~ "le�donoj\n"
-#~ "de via lando."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Nun vi povas enigi la \"root\" (radiko) pasvorto por via Linuks-"
-#~ "Mandrejka\n"
-#~ "sistemo.  Vi devas enigi la pasvorton dufoje por konfirmi ke amba� fojoj\n"
-#~ "estas identaj.\n"
-#~ "\n"
-#~ "\n"
-#~ "La \"root\"-a uzanto estas la administranto de la sistemo, kaj estas la "
-#~ "sola\n"
-#~ "uzanto permesata �an�i la sisteman konfigura�on.  Tial, elektu �i tiun\n"
-#~ "pasvorton zorge!  Nepermesata uzado de la \"root\"-a uzanto povas esti\n"
-#~ "treege dan�era al la sistema integreco kaj dateno, kaj al aliaj sistemoj\n"
-#~ "konektata al �i.  La pasvorto devus esti miksa�o de literciferaj signoj "
-#~ "kaj\n"
-#~ "almena� 8 signoj longa.  *Neniam* surpaperigu �in.  Tamen, ne elektu tro\n"
-#~ "longan a� komplikan pasvorton: vi devas povi memori �in sen tro multe da\n"
-#~ "peno."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Nun vi povas krei unu a� pli \"ordinara(j)\" uzanto(j), male al la\n"
-#~ "\"privilegia\" uzanto, \"root\".  Vi povas krei unu a� pli uzanto(j) por\n"
-#~ "�iu persono vi deziras permesi uzi la komputilon.  Notu ke �iu uzanto\n"
-#~ "havos viajn proprajn preferojn (grafikan medion, programajn aran�ojn,\n"
-#~ "ktp.) kaj �ian propran \"hejman dosierujon\", kie �i tiuj preferoj estas\n"
-#~ "konservata.\n"
-#~ "\n"
-#~ "\n"
-#~ "Anta� �io, krei uzanton por vi mem!  E� se vi estos la sola uzulo �e la\n"
-#~ "komputilo, vi ne devus konekti kiel \"root\" por �iutaga uzado de la\n"
-#~ "sistemo: �i estas tre alta sekureca risko.  Fari la sistemon neuzebla\n"
-#~ "estas oftege nur unu misklavo fora.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tial, vi devus konekti al la sistemo per ordinara uzanto vi kreos �i "
-#~ "tie,\n"
-#~ "kaj saluti kiel \"root\" nur por administraj kaj flegadaj kialoj."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO kaj Grub �efaj opcioj estas:\n"
-#~ "  - Startaparato: Fiksas la nomon de la aparato (ekz-e subdisko de "
-#~ "fiksdisko)\n"
-#~ "tiu enhavas la startsektoron.  Krom se vi scias specife alie, elektu\n"
-#~ "\"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Prokrastoperiodo anta� starti defa�ltan sistemon: Elektas la nombron\n"
-#~ "da dekonoj de sekundo ke la start�argilo devus atendi anta� starti la\n"
-#~ "unuan sistemon.  �i tiu utilas �e sistemoj kiuj tuj startas de la\n"
-#~ "fiksdisko malanta� ili ebligas la klavaron.  La start�argilo ne atendas "
-#~ "se\n"
-#~ "\"delay\" (prokrastoperiodo) estas ellasita a� estas fiksita al nul.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Grafika re�imo: �i tiu specifas la VGA tekstan re�imon por uzi dum\n"
-#~ "start.  La sekvantaj valoroj estas uzeblaj:\n"
-#~ "    * normala: elektu normalan 80 per 25 tekstan re�imon.\n"
-#~ "    * <numero>: uzu la respondan tekstan re�imon."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO estas start�argilo por Sparc: �i povas starti a� Linukson a� iun "
-#~ "ajn\n"
-#~ "mastruman sistemon �eestanta �e via komputilo.  Normale, �i tiuj aliaj\n"
-#~ "mastrumaj sistemoj estas �uste detektata kaj instalada.  Se tiel ne "
-#~ "estas,\n"
-#~ "vi povas aldoni enskribon mane per �i tiu ekrano.  Zorgu elekti la "
-#~ "�ustajn\n"
-#~ "parametrojn.\n"
-#~ "\n"
-#~ "\n"
-#~ "Eble vi anka� ne deziras doni atingon al �i tiuj aliaj mastrumaj "
-#~ "sistemoj\n"
-#~ "al iu ajn.  �iokaze vi povas forstreki la respondajn enskribojn.  Sed\n"
-#~ "�iokaze, vi bezonos startdiskon por starti ilin!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO �efaj opcioj estas:\n"
-#~ "  - Instalado de Start�argilo: Indiki kie vi deziras meti la informon\n"
-#~ "bezonata por start GNU/Linukso.  Krom se vi scias specife kion vi faras,\n"
-#~ "elektu \"Unua sektoro de drajvo (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Prokrastoperiodo anta� starti defa�ltan sistemon: Elektas la nombron\n"
-#~ "da dekonoj de sekundo ke la start�argilo devus atendi anta� starti la\n"
-#~ "unuan sistemon.  �i tiu utilas �e sistemoj kiuj tuj startas de la\n"
-#~ "fiksdisko malanta� ili ebligas la klavaron.  La start�argilo ne atendas "
-#~ "se\n"
-#~ "\"delay\" (prokrastoperiodo) estas ellasita a� estas fiksita al nul."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Nun estas tempo por konfiguri la X Fenestra Sistemo, kiu estas la kerno\n"
-#~ "de la GNU/Linuksa GUI (Grafika UzulInterfaco).  Por tiu celo, vi devas\n"
-#~ "konfiguri vian grafikan karton kaj ekranon.  La plejparto de �i tiuj "
-#~ "pa�oj\n"
-#~ "estas a�tomatitaj, tamen, do via laboro eble konsistos en konfirmi kion\n"
-#~ "estis farata kaj akcepti la aran�ojn. :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kiam la konfigurado estas kompleta, X lan�i�os (krom se vi demandas al\n"
-#~ "DrakX ne fari tion) pro ke vi kontrolu �in la observu se la aran�ojn\n"
-#~ "ta�gas por vi.  Se ne, vi povas reveni kaj �an�i ilin, tiom da tempoj "
-#~ "kiom\n"
-#~ "estas necesa."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Se iu misas en la X-a konfigura�o, uzu �i tiujn opciojn por �uste "
-#~ "konfiguri\n"
-#~ "la X Fenestran Sistemon."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Se vi preferas uzi grafikan saluton, elektu \"Jes\".  Aliokaze, elektu "
-#~ "\"Ne\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Via sistemo restartos.\n"
-#~ "\n"
-#~ "Post restartado, via nova Linuks-Mandrejka sistemo �argi�os a�tomate.  Se "
-#~ "vi\n"
-#~ "deziras starti en alian ekzistanta mastruman sistemon, bonvole legu la\n"
-#~ "pluan instrukcion."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "�e�a (Programistoj)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovaka (Programistoj)"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Skribu /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formatu �ion"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Post formatado de �iuj subdisko,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "�iuj datenoj sur tiuj subdisko estos perdata"
-
-#~ msgid "Reload"
-#~ msgstr "Re�argu"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "�u vi deziras krei a�toinstalan disketon por replikado de Linukso?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL Konfigura�o"
-
-#, fuzzy
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Kun malproksima CUPS servilo, vi ne devas konfiguri iun printilon\n"
-#~ "�i tie; printiloj estos a�tomate dektektataj.  Se vi havas dubojn,\n"
-#~ "elektu \"Malproksima CUPS servilo\"."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Malproksima printvico"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Domajna nomo"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Neniu printilo"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "ISDN-a Konfigura�on"
-
-#, fuzzy
-#~ msgid "Profile "
-#~ msgstr "muntado malsukcesis: "
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Sendrapideco: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Ricevrapideco: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Speco de konekto"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Konektas al la Interreto"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Malkonektas el la Interreto"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Malkonektado el la Interreto malsukcesis."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Malkonektado el la Interreto finis."
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Nomo de konekto"
-
-#~ msgid "sent: "
-#~ msgstr "sendita(j): "
-
-#~ msgid "received: "
-#~ msgstr "ricevita(j): "
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Defa�lta"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Mi ne povas kompreni la enhavon de la konfigurodosiero."
-
-#~ msgid "Adapter"
-#~ msgstr "Adaptilo"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Malebligu"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Ebligu"
-
-#, fuzzy
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Konfiguru interretan konekta�on"
-
-#~ msgid "Choose"
-#~ msgstr "Elektu"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Vi povas specifi rekte la URI por atingi la printilon per CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Jes, printu Askian provpa�on"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Jes, printu PostSkriban provpa�on"
-
-#~ msgid "Paper Size"
-#~ msgstr "Papergrandeco"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "El�etu pa�on post tasko?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint-aj pelilaj opcioj"
-
-#~ msgid "Color depth options"
-#~ msgstr "Kolorprofunecaj opcioj"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Printu tekston kiel PostScripto?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Riparu �tuparan tekston?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Nombro de pa�oj en eliga pa�o"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr ""
-#~ "Dekstra/Maldrekstra mar�enoj en punktoj (1/72 de colo, proksimume 1/3 mm)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr ""
-#~ "Supra/Malsupra mar�enoj en punktoj (1/72 de colo, proksimume 1/3 mm)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Aldonaj GhostScript-aj opcioj"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Aldonaj Tekstaj opcioj"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inversigu ordon de pa�oj"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Elektu Malproksiman Printilan Konekton"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "�iuj printilo bezonas nomon (ekzemple lp).\n"
-#~ "Aliaj parametroj, ekzemple la priskribon de la printilo a� �ian lokon\n"
-#~ "vi povas difini.  Kiu nomo devus uzata por �i tiu printilo kaj kiel\n"
-#~ "�i estas konektata?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "�iuj printvico (al kiu printajn taskojn estas direktata) bezonas nomon\n"
-#~ "(ofte lp) kaj fonan eneligan dosierujon asociata kun �i.  Kiu nomo kaj\n"
-#~ "dosierujo devus uzata por �i tiu printvico?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nomo de printvico"
-
-#~ msgid "Spool directory"
-#~ msgstr "Fona eneliga dosierujo"
diff --git a/perl-install/share/po/es.po b/perl-install/share/po/es.po
deleted file mode 100644
index fb6f837b3..000000000
--- a/perl-install/share/po/es.po
+++ /dev/null
@@ -1,12570 +0,0 @@
-# Translation file (spanish) of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Pablo Saratxaga <pablo@mandrakesoft.com>, 1999-2000
-# Fabian Mandelbaum <fabman@mandrakesoft.com>, 2000, 2001, 2002
-# Juan Manuel García Molina <juanma_gm@wanadoo.es>, 2000-2002
-# Carlos Sánchez <vcbsaorc@vc.ehu.es>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-15 10:34-0300\n"
-"Last-Translator: Fabian Mandelbaum <fabman@mandrakesoft.com>\n"
-"Language-Team: Spanish <cooker-i18n@linux-mandrake.com>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configurar los monitores independientemente"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Usar extensión Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configurar sólo la tarjeta \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Configuración multi-monitor"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Su sistema soporta configuración multi-monitor.\n"
-"¿Qué desea hacer?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Tarjeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Seleccione una tarjeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Elija un servidor X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Elija un controlador X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Controlador X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "¿Qué tipo de configuración de XFree desea tener?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Su tarjeta puede admitir aceleración 3D pero sólo con XFree %s.\n"
-"XFree %s admite su tarjeta y puede tener mejor comportamiento en 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Su tarjeta puede admitir aceleración 3D por hardware con XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s con aceleración 3D por hardware"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Su tarjeta puede admitir aceleración 3D por hardware con XFree %s,\n"
-"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s con aceleración 3D EXPERIMENTAL por hardware"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Su tarjeta sólo puede admitir aceleración de 3D por hardware con XFree %s,\n"
-"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR.\n"
-"XFree %s admite su tarjeta y puede tener un mejor comportamiento en 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalación del controlador de la pantalla)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configuración de XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Seleccione la cantidad de memoria de su tarjeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Elija las opciones para el servidor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Elija un monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Los dos parámetros críticos son la frecuencia de barrido vertical, que "
-"indica la frecuencia\n"
-"a la cual se refresca la pantalla entera, y más importante aún, la "
-"frecuencia de sincronización\n"
-"horizontal, la cual es la frecuencia de las líneas de barrido horizontal.\n"
-"\n"
-"Es MUY IMPORTANTE que no especifique un tipo de monitor con una\n"
-"frecuencia de sincronización superior a la capacidad real de su monitor:\n"
-"puede dañar su monitor.\n"
-" En caso de duda, elija una configuración conservadora."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Frecuencia de barrido horizontal"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Frecuencia de barrido vertical"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "El monitor no está configurado"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "La tarjeta gráfica todavía no está configurada"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Aún no ha elegido las resoluciones"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "¿Desea probar la configuración?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Advertencia: probar con esta tarjeta de vídeo puede colgar su ordenador"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Probar la configuración"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"intente cambiar algunos parámetros"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ocurrió un error:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Saliendo en %d segundos"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "¿Es ésta la configuración correcta?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ocurrió un error, intente cambiar algunos parámetros"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolución"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Elija la resolución y la profundidad de colores"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Tarjeta gráfica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Servidor XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Más"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Aceptar"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modo experto"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mostrar todo"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resoluciones"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Distribución del teclado: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo de ratón: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo del ratón: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frecuencia horizontal del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frecuencia vertical del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Tarjeta gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identificación de la tarjeta gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memoria de la tarjeta gráfica: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profundidad de color: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolución: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Preparando la configuración de X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "¿Qué desea hacer?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Cambiar el monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Cambiar la tarjeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Cambiar las opciones del servidor X"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Cambiar la resolución"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostrar información"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Probar de nuevo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Salir"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"¿Conservar los cambios?\n"
-"La configuración actual es:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X al arrancar"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Puede configurar su computadora para que inicie X automáticamente\n"
-"al arrancar. ¿Desea que se lance X cuando reinicie?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Abra de nuevo una sesión %s para activar los cambios"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Por favor salga de la sesión y luego pulse Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 colores (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil colores (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil colores (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millones de colores (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 billones de colores (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB o más"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA estándar, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 a 87 Hz entrelazado (sin 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrelazado, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA extendido, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA no-entrelazado, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA alta-frecuencia, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor multi-frecuencia que soporta 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor multi-frecuencia que soporta 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor multi-frecuencia que soporta 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor que soporta 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor que soporta 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primer sector de la partición de arranque"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primer sector del disco (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instalación de SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "¿Dónde quiere instalar el cargador de arranque?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalación de LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO con menú de texto"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO con menú gráfico"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Arrancar desde DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Opciones principales del cargador de arranque"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Cargador de arranque a usar"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalación del cargador de arranque"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dispositivo de arranque"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (no funciona con BIOS antiguos)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compacto"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Modo de vídeo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Demora antes de arrancar la imagen predeterminada"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Contraseña"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Contraseña (de nuevo)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Restringir las opciones de la línea de comandos"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "restringir"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Limpiar /tmp en cada inicio del equipo"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precise el tamaño de la RAM si es necesario (se encontraron %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Activar perfiles múltiples"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Proporcione el tamaño de la RAM en MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"La opción \"Restringir las opciones de la línea de comandos\"\n"
-"no tiene sentido sin contraseña"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Vuelva a intentarlo, por favor"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Las contraseñas no coinciden"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Mensaje de inicio"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Demora de open firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Tiempo de espera de arranque del núcleo"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "¿Habilitar el arranque desde CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "¿Habilitar el arranque de OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "¿SO predeterminado?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Decidió instalar el cargador de arranque en una partición.\n"
-"Esto implica que ya tiene un cargador de arranque en el disco desde el que "
-"arranca (ej: System Commander).\n"
-"\n"
-"¿Desde qué disco arranca?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Aquí están las diferentes entradas.\n"
-"Puede añadir otras o cambiar las que ya existen."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Añadir"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Hecho"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modificar"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "¿Qué tipo de entrada desea añadir?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Otro SO (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Otro SO (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Otro SO (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imagen"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Raíz"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Añadir"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lectura/Escritura"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabla"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Inseguro"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiqueta"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Por defecto"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Tamaño de initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Quitar entrada"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "No se admite una etiqueta vacía"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Debe especificar una imágen del núcleo"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Debe especificar una partición raíz"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Esta etiqueta ya está en uso"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s interfaces %s encontradas"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "¿Tiene alguna otra?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¿Tiene alguna interfaz %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "No"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Sí"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ver información sobre el hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalando controlador para la tarjeta %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(módulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "¿Qué controlador de %s debo probar?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"En algunos casos, el controlador de %s necesita información extra\n"
-"para funcionar correctamente, aunque normalmente funcione sin ella.\n"
-"¿Desea especificar información extra para el controlador o dejar que el "
-"mismo\n"
-"pruebe su equipo y encuentre la información que necesita? A veces,\n"
-"el probar el equipo puede provocar que éste se cuelgue, pero no debería\n"
-"causar ningún daño."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Autodetección"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Especificar las opciones"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Ahora puede proporcionar las opciones al módulo %s.\n"
-"Note que cualquier dirección debe ingresarse con el prefijo 0x como '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Aquí deben ir las diferentes opciones para el módulo %s.\n"
-"Las opciones son de la forma \"nombre=valor nombre2=valor2 ...\".\n"
-"Por ejemplo, \"io=0x300 irq=7\""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opciones de los módulos:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Error al cargar el módulo %s.\n"
-"¿Desea intentarlo de nuevo con otros parámetros?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "acceso a programas X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "acceso a herramientas rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "permitir \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "acceso a archivos administrativos"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s ya fue añadido)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Esta contraseña es demasiado sencilla"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Introduzca el nombre de usuario"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"El nombre de usuario (login) sólo debe contener letras, números, `-' y `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Este nombre de usuario ya fue añadido"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Añadir un usuario"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduzca un usuario\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aceptar el usuario"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nombre y apellidos"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nombre del usuario"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icono"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Entrada automática"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Puede configurar su computadora para que entre automáticamente\n"
-"en sesión con un usuario dado al arrancar. ¿Desea esa funcionalidad?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Elija el usuario predeterminado:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Elija el gestor de ventanas a ejecutar:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Por favor, elija el idioma a usar."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Puede elegir otros idiomas, que estarán disponibles después de la instalación"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Todo"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Permitir a todos los usuarios"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personalizada"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "No compartir"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Se necesita instalar el paquete %s. ¿Quiere instalarlo?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Puede exportar usando NFS o Samba. ¿Cuál elige"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Falta el paquete obligatorio %s"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"¿Desea permitir a los usuarios exportar algunos directorios personales?\n"
-"Si lo hace, los usuarios podrán simplemente hacer clic sobre \"Compartir\" en konqueror y nautilus.\n"
-"\n"
-"\"Personalizar\" permite una granularidad por usuario.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Lanzar userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"La compartición por usuario utiliza el grupo \"fileshare\". \n"
-"Puede utilizar userdrake para añadir un usuario a este grupo."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bienvenidos, crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Estándar"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alta"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Más alta"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoica"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Este nivel se debe usar con mucho cuidado. Hace su sistema más simple de\n"
-"usar, pero también mucho más vulnerable: no debe usarse para una máquina\n"
-"conectada en red con otras o a Internet. No hay contraseñas de acceso."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Las contraseñas están activadas, pero tampoco se recomienda usar este\n"
-"nivel para un ordenador conectado a una red."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Éste es el nivel de seguridad estándar recomendado para una máquina que se\n"
-"utilizará para conectarse a la Internet como cliente."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Ya hay algunas restricciones, y todas las noches se corren más "
-"verificaciones automáticas."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Con este nivel de seguridad, es posible utilizar el sistema como un "
-"servidor.\n"
-"La seguridad es lo suficientemente alta como para usar el sistema como un\n"
-"servidor que acepte conexiones de múltiples clientes. Nota: si su máquina "
-"sólo es un cliente en la Internet, mejor debería elegir un nivel inferior."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Basado en el nivel anterior, pero el sistema está completamente cerrado.\n"
-"Las características de seguridad están al máximo."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Elegir el nivel de seguridad"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Nivel de seguridad"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Utilizar libsafe para los servidores"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Una biblioteca que le defiende ante ataques de desbordamiento de búfer y "
-"ataques con cadenas de formato."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"¡Bienvenido a %s, el selector de SO de arranque!\n"
-"\n"
-"Elija un sistema operativo de la lista o espere %d segundos\n"
-"para que arranque el sistema predeterminado.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "¡Bienvenido a GRUB, el selector de SO de arranque!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use las teclas %c y %c para seleccionar una entrada."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pulse intro para iniciar el SO elegido, pulse 'e' para editar"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "los comandos antes de iniciar, o pulse 'c' para una linea de comandos."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Se va a iniciar la entrada resaltada en %d segundos."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "no hay espacio suficiente en /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Escritorio"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menú inicio"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "No puede instalar el cargador de arranque en una partición %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "todavía no está implementada la ayuda.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuración del estilo de arranque"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Archivo"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Archivo/_Salir"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>S"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor categorizante de estilo nuevo"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor de estilo nuevo"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor tradicional"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor tradicional Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Iniciar Aurora en el momento del arranque"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Modo de Lilo/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Modo de Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"En este momento está usando %s como gestor de arranque.\n"
-"Haga click sobre configurar para lanzar el asistente de configuración."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configurar"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Modo del sistema"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Lanzar el sistema X-Window al comenzar"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "No, no deseo entrada automática"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Sí, deseo entrada automática con este (usuario, escritorio)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Aceptar"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "¡no se puede abrir /etc/inittab para lectura: %s !"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "No se pueden realizar instantáneas de pantalla antes del particionado"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"Luego de la instalación estarán disponibles las instantáneas de pantalla en %"
-"s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francia"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Bélgica"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "República Checa"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Alemania"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grecia"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Noruega"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Suecia"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Holanda"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Estados Unidos"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Por favor, haga primero una copia de seguridad de sus datos"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "¡Lea con cuidado!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Si piensa usar aboot, no olvide dejar espacio libre (2048 sectores es\n"
-"suficiente) al principio del disco"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Error"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Asistente"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Elija una acción"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tiene una partición FAT de gran tamaño\n"
-"(generalmente usada por DOS/Windows de MicroSoft).\n"
-"Le sugiero que primero cambie el tamaño de la misma\n"
-"(para eso haga clic sobre ella, y luego sobre \"Redimensionar\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Por favor, haga clic sobre una partición"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalles"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Sistema de. archivos. con journal"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Intercambio"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Vacío"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Otros"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipos de sistemas de archivos:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Crear"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use \"%s\" en su lugar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Borrar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Use \"Desmontar\" primero"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Se perderán todos los datos de la partición %s después de cambiar su tipo"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Elija una partición"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Elija otra partición"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Salir"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Cambiar al modo experto"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Cambiar al modo normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Deshacer"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "¿Seguir adelante?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Salir sin grabar"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "¿Salir del programa sin grabar la tabla de particiones?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "¿Desea guardar las modificaciones en /etc/fstab?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Asignación automática"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Borrar todas"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Información del disco rígido"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Todas las particiones primarias están usadas"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "No se pueden agregar más particiones"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Por favor, para tener más particiones borre alguna para poder crear una "
-"partición extendida"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Guardar la tabla de particiones"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Restaurar la tabla de particiones"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Rescatar la tabla de particiones"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Volver a cargar la tabla de particiones"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Montaje automático de dispositivos extraíbles"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Elija un archivo"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La tabla de particiones de respaldo no tiene\n"
-"el mismo tamaño.  ¿Desea continuar de todas formas?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Advertencia"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Inserte un disquete en la unidad\n"
-"Se perderán todos los datos del disquete"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Tratando de rescatar la tabla de particiones"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Información detallada"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Punto de montaje"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opciones"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Redimensionar"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Desplazar"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatear"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montar"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Añadir al RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Añadir al LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmontar"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Quitar del RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Quitar del LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modificar el RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Usar para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Crear una partición nueva"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sector de comienzo: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Tamaño en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipo de sistema de. archivos: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punto de montaje: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferencia: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "¿Borrar el archivo de loopback?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Cambiar el tipo de partición"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "¿Qué sistema de archivos desea?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Cambiando de ext2 a ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "¿Donde desea montar el archivo de loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "¿Dónde desea montar el dispositivo %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"No se puede deseleccionar el punto de montaje ya que esta partición\n"
-"se usa para un montaje en loopback.\n"
-"Quite el montaje de loopback primero"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Calculando los límites del sistema de archivos FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Redimensionando"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Esta partición no es redimensionable"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"Debería hacer una copia de seguridad de todos los datos de esta partición"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Se perderán todos los datos de la partición %s tras cambiar su tamaño"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Eligiendo el tamaño nuevo"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Tamaño nuevo en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "¿A qué disco desea desplazarla?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "¿A qué sector desea desplazarla?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Desplazando"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Desplazando una partición..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Elegir un RAID existente al que añadir"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nuevo"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Elegir un LVM existente al que añadir"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "¿nombre de LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Esta partición no puede usarse para el loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nombre del archivo de loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Indique el nombre de un archivo"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"El archivo ya lo utiliza otro dispositivo loopback.\n"
-"Elija otro archivo, por favor"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "El archivo ya existe. ¿Desea usarlo?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opciones de montaje"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Varios"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivel"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "tamaño de los bloques"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Cuidado: esta operación es peligrosa."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "¿Qué tipo de particionamiento?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Disculpe, pero no se permite la creación de una partición /boot tan lejos\n"
-"en el disco (en un cilindro > 1024). Puede usar lilo LILO (y es probable "
-"que\n"
-"no funcione), o bien no utiliza LILO (y entonces no necesita /boot)"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La partición que escogió para usar como raíz (/) está físicamente ubicada\n"
-"después del 1024º cilindro del disco rígido, y no tiene partición /boot.\n"
-"Si piensa usar el cargador de arranque LILO, tenga en cuenta que tiene\n"
-"que añadir una partición /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Eligió una partición RAID en software como partición raíz (/).\n"
-"Ningún cargador de arranque es capaz de manejarlo sin una partición /boot.\n"
-"Así que tenga en cuenta que tiene que añadir una partición /boot."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "¡Se escribirá al disco la tabla de particiones de la unidad %s!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Necesita reiniciar el equipo para que la modificación tenga efecto"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Se perderán todos los datos de la partición %s después de formatearla"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formateando"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formateando el archivo de loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formateando la partición %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Ocultar archivos"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Mover los archivos a la nueva partición"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"El directorio %s ya tiene algunos datos\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Moviendo los archivos a la nueva partición"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Copiando %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Borrando %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "la partición %s ahora se conoce como %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra DOS: %s (simplemente una adivinanza)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nombre: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Comienzo: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Tamaño: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectores"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindros %d a %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formateado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "No formateado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Archivo(s) de loopback:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partición predeterminada de arranque\n"
-"    (para arranque de MS-DOS, no para lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivel %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tamaño de los bloques %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos-RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nombre del archivo de loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Es probable que esta partición sea\n"
-"una partición de Controlador, probablemente\n"
-"debería dejarla como está.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Esta partición especial de Bootstrap\n"
-"es para el arranque\n"
-"dual de su sistema.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamaño: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometría: %s cilindros, %s cabezas, %s sectores\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos-LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo de la tabla de particiones: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "en el bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opciones: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Clave de cifrado del sistema de archivos"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Elija la clave de cifrado de su sistema de archivos"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Esta clave de cifrado es demasiado simple\n"
-"(tiene que tener por lo menos una longitud de %d caracteres)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Las claves de cifrado no coinciden"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Clave de cifrado"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Clave de cifrado (otra vez)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Cambiar tipo"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Por favor, haga clic sobre un medio"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Buscar servidores"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formateo de %s falló"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "No sé cómo formatear %s en el tipo %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "falló el montaje de la partición %s en el directorio %s"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck falló con código de salida %d o señal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "error desmontando %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simple"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "con /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "No se puede usar JFS para particiones menores de 32MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "No se puede usar ReiserFS para particiones menores de 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Los puntos de montaje deben comenzar con una /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ya existe una partición con el punto de montaje %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "No puede usar un Volumen Lógico LVM para el punto de montaje %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Este directorio debería permanecer dentro del sistema de archivos raíz"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Necesita un sistema de archivos verdadero (ext2, reiserfs) para este punto "
-"de montaje\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"No puede usar un sistema de archivos cifrado para el punto de montaje %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "No hay espacio libre suficiente para la asignación automática"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nada para hacer"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Error al abrir %s para escribir: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ocurrió un error - no se encontró ningún dispositivo válido para crear los "
-"nuevos sistemas de archivos. Por favor, verifique su equipo para saber la "
-"razón de este fallo"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "¡No tiene ninguna partición!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux es un sistema multiusuario, y esto significa que cada usuario\n"
-"puede tener sus preferencias propias, sus archivos propios, y así\n"
-"sucesivamente. Puede leer la \"Guía del Usuario\" para aprender más. Pero,\n"
-"a diferencia de \"root\", que es el administrador, los usuarios que agregue\n"
-"aquí no podrán cambiar nada excepto su configuración y sus archivos\n"
-"propios. Tendrá que crear al menos un usuario no privilegiado para Usted\n"
-"mismo. Esa cuenta es donde debería conectarse para el uso diario. Aunque es\n"
-"muy práctico ingresar como \"root\" diariamente, ¡también puede ser muy\n"
-"peligroso! El error más leve podría significar que su sistema deje de\n"
-"funcionar. Si comete un error serio como usuario no privilegiado, sólo\n"
-"puede llegar a perder algo de información, pero no todo el sistema.\n"
-"\n"
-"Primero tendrá que ingresar su nombre real. Esto no es obligatorio, por\n"
-"supuesto ya que, en realidad, puede ingresar lo que desee. DrakX tomará\n"
-"entonces la primer palabra que ingresó y la copiará al campo \"Nombre de\n"
-"usuario\". Este es el nombre que este usuario en particular usará para\n"
-"ingresar al sistema. Lo puede cambiar. Luego tendrá que ingresar una\n"
-"contraseña aquí. La contraseña de un usuario no privilegiado (regular) no\n"
-"es tan crucial como la de \"root\" desde el punto de vista de la seguridad,\n"
-"pero esto no es razón alguna para obviarla - después de todo, son sus\n"
-"archivos los que están en riesgo.\n"
-"\n"
-"Si hace clic sobre \"Aceptar usuario\", entonces puede agregar tantos como\n"
-"desee. Agregue un usuario para cada uno de sus amigos: por ejemplo su padre\n"
-"o su hermana. Cuando haya terminado de agregar todos los usuarios que\n"
-"desee, seleccione \"Hecho\".\n"
-"\n"
-"Hacer clic sobre el botón \"Avanzadas\" le permite cambiar el \"shell\"\n"
-"predeterminado para ese usuario (bash por defecto)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Arriba se listan las particiones Linux existentes que se detectaron en su\n"
-"disco rígido. Puede mantener las elecciones hechas por el asistente, las\n"
-"mismas son buenas para las instalaciones más comunes. Si hace cambios, al\n"
-"menos debe definir una partición raíz (\"/\"). No elija una partición muy\n"
-"pequeña o no podrá instalar software suficiente. Si desea almacenar sus\n"
-"datos en una partición separada, también puede necesitar crear una\n"
-"partición para \"/home\" (sólo es posible si tiene más de una partición\n"
-"Linux disponible).\n"
-"\n"
-"Cada partición se lista como sigue: \"Nombre\", \"Capacidad\".\n"
-"\n"
-"\"Nombre\" está estructurado: \"tipo de disco rígido\", \"número de disco\n"
-"rígido\", \"número de partición\" (por ejemplo, \"hda1\").\n"
-"\n"
-"\"Tipo de disco rígido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
-"el mismo es un disco SCSI.\n"
-"\n"
-"\"Número de disco rígido\" siempre es una letra que sigue a \"hd\" o a\n"
-"\"sd\". Para los discos IDE:\n"
-"\n"
-" * \"a\" significa \"disco rígido maestro en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"b\" significa \"disco rígido esclavo en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"c\" significa \"disco rígido maestro en la controladora IDE\n"
-"secundaria\",\n"
-"\n"
-" * \"d\" significa \"disco rígido esclavo en la controladora IDE\n"
-"secundaria\".\n"
-"\n"
-"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
-"significa \"segunda SCSI ID menor\", etc."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"La instalación Mandrake Linux se divide en varios CD-ROMs. DrakX sabe si un\n"
-"paquete seleccionado se encuentra en otro CD y expulsará el CD corriente y\n"
-"le pedirá que inserte uno diferente cuando sea necesario."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Ahora es el momento de especificar los programas que desea instalar en su\n"
-"sistema. Hay miles de paquetes disponibles para Mandrake Linux, y no se\n"
-"supone que los conozca a todos de memoria.\n"
-"\n"
-"Si está realizando una instalación estándar desde un CD-ROM, primero se le\n"
-"pedirá que especifique los CDs que tiene (sólo en modo Experto). Verifique\n"
-"las etiquetas de los CDs y marque las casillas que corresponden a los que\n"
-"tiene disponibles para la instalación. Haga clic sobre \"Aceptar\" cuando\n"
-"esté listo para continuar.\n"
-"\n"
-"Los paquetes se ordenan en grupos que corresponden a un uso particular de\n"
-"su máquina. Los grupos en sí mismos están clasificados en cuatro secciones:\n"
-"\n"
-" * \"Estación de trabajo\": si planea utilizar su máquina como una estación\n"
-"de trabajo, seleccione uno o más grupos correspondientes.\n"
-"\n"
-" * \"Desarrollo\": si la máquina se utilizará para programación, elija\n"
-"el(los) grupo(s) deseado(s).\n"
-"\n"
-" * \"Servidor\": finalmente, si se pretende usar la máquina como un "
-"servidor\n"
-"aquí puede seleccionar los servicios más comunes que desea que se instalen\n"
-"en la misma.\n"
-"\n"
-" * \"Entorno gráfico\": seleccione aquí su entorno gráfico preferido. Si\n"
-"desea tener una estación de trabajo gráfica, ¡seleccione al menos uno!\n"
-"\n"
-"Si mueve el cursor del ratón sobre el nombre de un grupo se mostrará un\n"
-"pequeño texto explicativo acerca de ese grupo. Si deselecciona todos los\n"
-"grupos cuando está realizando una instalación regular (es decir, no una\n"
-"actualización), aparecerá un diálogo que propone opciones diferentes para\n"
-"una instalación mínima:\n"
-"\n"
-" * \"Con X\": instala la menor cantidad de paquetes posible para tener un\n"
-"escritorio gráfico que funcione;\n"
-"\n"
-" * \"Con documentación básica\": instala el sistema base más algunos\n"
-"utilitarios básicos y la documentación de los mismos. Esta instalación es\n"
-"adecuada para configurar un servidor;\n"
-"\n"
-" * \"Instalación realmente mínima\": instalará el mínimo necesario estricto\n"
-"para obtener un sistema Linux que funciona, sólo en línea de comandos. Esta\n"
-"instalación ocupa alrededor de 65Mb.\n"
-"\n"
-"Puede marcar la opción \"Selección por paquetes individuales\" que es útil\n"
-"si está familiarizado con los paquetes que se ofrecen o si desea tener un\n"
-"control total sobre lo que se instalará.\n"
-"\n"
-"Si inició la instalación en el modo \"Actualización\", puede deseleccionar\n"
-"todos los grupos para evitar instalar cualquier paquete nuevo. Esto es útil\n"
-"para reparar o actualizar un sistema existente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finalmente, dependiendo de si Usted elige seleccionar los paquetes\n"
-"individuales o no, se le presentará un árbol que contiene todos los\n"
-"paquetes clasificados por grupos y sub-grupos. Mientras navega por el\n"
-"árbol, puede seleccionar grupos enteros, sub-grupos, o simplemente\n"
-"paquetes.\n"
-"\n"
-"Tan pronto como selecciona un paquete en el árbol, aparece una descripción\n"
-"del mismo sobre la derecha. Cuando ha finalizado con su selección, haga\n"
-"clic sobre el botón \"Instalar\" que lanzará el proceso de instalación.\n"
-"Dependiendo de la velocidad de su hardware y de la cantidad de paquetes que\n"
-"se deben instalar, el proceso puede tardar un rato en completarse. En la\n"
-"pantalla se muestra una estimación del tiempo necesario para completar la\n"
-"instalación para ayudarlo a considerar si tiene tiempo suficiente par\n"
-"disfrutar una taza de café.\n"
-"\n"
-"!! Si ha sido seleccionado un paquete de servidor ya sea intencionalmente o\n"
-"porque era parte de un grupo completo, se le pedirá que confirme que\n"
-"realmente desea que se instalen esos servidores. Bajo Mandrake Linux,\n"
-"cualquier servidor instalado se inicia de manera predeterminada al momento\n"
-"del arranque. Aunque estos son seguros y no tienen problemas conocidos al\n"
-"momento en que se publicó la distribución, puede ocurrir que más tarde se\n"
-"descubran vulnerabilidades en la seguridad. En particular, si no sabe que\n"
-"es lo que se supone que hace un servicio o la razón por la cual se está\n"
-"instalando, entonces haga clic sobre \"No\". Si hace clic sobre \"Sí\" se\n"
-"instalarán todos los servicios listados y de manera predeterminada los\n"
-"mismos arrancarán automáticamente. !!\n"
-"\n"
-"La opción \"Dependencias automáticas\" simplemente deshabilita el diálogo\n"
-"de advertencia cuando el instalador selecciona automáticamente un paquete.\n"
-"Esto ocurre porque se determina que es necesario para satisfacer una\n"
-"dependencia con otro paquete para poder completar la instalación\n"
-"satisfactoriamente.\n"
-"\n"
-"El pequeño icono del disquete al final de la lista le permite cargar la\n"
-"lista de paquetes elegida durante una instalación previa. Haga clic sobre\n"
-"este icono y se le pedirá que inserte un disquete creado con anterioridad\n"
-"al final de otra instalación. Vea el segundo consejo del último paso para\n"
-"información sobre como crear dicho disquete."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Ahora se le propone configurar su conexión de red/Internet. Si desea\n"
-"conectar su computadora a la Internet o a una red de área local, haga clic\n"
-"sobre \"Aceptar\". Se lanzará la detección automática de dispositivos de\n"
-"red y módems. Si esta detección falla, quite la marca de la casilla \"Usar\n"
-"detección automática\" la próxima vez. También puede elegir no configurar\n"
-"la red, o hacerlo más tarde; en ese caso simplemente haga clic sobre el\n"
-"botón \"Cancelar\".\n"
-"\n"
-"Los tipos de conexión disponibles son: módem tradicional, módem RDSI\n"
-"(ISDN), conexión ADSL, cable módem, y finalmente una simple conexión LAN\n"
-"(Ethernet).\n"
-"\n"
-"Aquí no entraremos en detalle en cada configuración. Simplemente debe\n"
-"asegurarse que su Proveedor de Servicios de Internet o su administrador del\n"
-"sistema le proporcionaron todos los parámetros de configuración.\n"
-"\n"
-"Puede consultar el capítulo de \"Guía del Usuario\" sobre las conexiones a\n"
-"la Internet para detalles acerca de la configuración, o simplemente esperar\n"
-"hasta que su sistema esté instalado y usar el programa que se describe aquí\n"
-"para configurar su conexión.\n"
-"\n"
-"Si desea configurar la red más tarde, luego de la instalación, o si ha\n"
-"finalizado de configurar su conexión de red, haga clic sobre \"Cancelar\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Ahora puede elegir los servicios que desea iniciar durante el arranque.\n"
-"\n"
-"Aquí se presentan todos los servicios disponibles con la instalación\n"
-"corriente. Debe revisarlos con cuidado y quitar la marca de aquellos que no\n"
-"siempre son necesarios al arrancar.\n"
-"\n"
-"Puede obtener un pequeño texto explicativo acerca de un servicio\n"
-"seleccionando un servicio específico. Sin embargo, si no está seguro si un\n"
-"servicio es útil o no, es más seguro dejar el comportamiento\n"
-"predeterminado.\n"
-"\n"
-"!! Tenga mucho cuidado en esta etapa si pretende usar su máquina como un\n"
-"servidor: probablemente no deseará arrancar servicios que no necesita. Por\n"
-"favor recuerde que varios servicios pueden ser peligrosos si se habilitan\n"
-"en un servidor. En general, seleccione sólo aquellos servicios que\n"
-"realmente necesita. !!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux administra la hora en GMT (\"Greenwich Mean Time\", Hora del\n"
-"Meridiano de Greenwich) y la traduce a la hora local de acuerdo al huso\n"
-"horario que Usted seleccionó. Sin embargo, es posible desactivar esto\n"
-"quitando la marca de la casilla \"Reloj interno puesto a GMT\" de forma tal\n"
-"que el reloj de hardware es el mismo que el del sistema. Esto es útil\n"
-"cuando la máquina alberga otro sistema operativo como Windows.\n"
-"\n"
-"La opción \"Sincronización automática de hora (usando NTP)\" regulará\n"
-"automáticamente el reloj conectándose a un servidor remoto de la hora en la\n"
-"Internet. Elija un servidor ubicado cerca suyo en la lista que se presenta.\n"
-"Por supuesto debe tener una conexión con la Internet funcionando para que\n"
-"esta característica funcione. La misma instalará en su máquina un servidor\n"
-"de la hora que, opcionalmente, puede ser utilizado por otras máquinas en su\n"
-"red local."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (por X Window System) es el corazón de la interfaz gráfica de GNU/Linux\n"
-"en el que se apoyan todos los entornos gráficos (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) que se incluyen con Mandrake Linux. En esta sección,\n"
-"DrakX intentará configurar a X automáticamente.\n"
-"\n"
-"Es extremadamente raro que esto falle, a menos que el hardware sea muy\n"
-"antiguo (o muy nuevo). Si no falla, arrancará X automáticamente con la\n"
-"mejor resolución posible dependiendo del tamaño de su monitor. Luego\n"
-"aparecerá una ventana que le pregunta si la puede ver.\n"
-"\n"
-"Si está haciendo una instalación en modo \"Experto\", ingresará al\n"
-"asistente de configuración de X. Para más información sobre este asistente\n"
-"vea la sección correspondiente del manual.\n"
-"\n"
-"Si puede ver el mensaje y responde \"Sí\", entonces DrakX continuará con el\n"
-"paso siguiente. Si no puede ver el mensaje, simplemente significa que la\n"
-"configuración no era la correcta y la prueba terminará automáticamente\n"
-"luego de 10 segundos, restaurando la pantalla."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"La primera vez que intenta la configuración de X Usted puede no estar muy\n"
-"satisfecho con el resultado (la pantalla es muy pequeña, está corrida hacia\n"
-"la izquierda o hacia la derecha...). Es por esto que, incluso si X arranca\n"
-"correctamente, DrakX le preguntará si la configuración le conviene. También\n"
-"propondrá cambiarla mostrando una lista de modos válidos que pudo\n"
-"encontrar, y le pedirá que seleccione alguno.\n"
-"\n"
-"Como último recurso, si todavía no puede hacer que X funcione, elija\n"
-"\"Cambiar la tarjeta gráfica\", seleccione \"Tarjeta no listada\", y cuando\n"
-"se le pregunte acerca de que servidor desea elija \"FBDev\". Esta es una\n"
-"opción a prueba de fallos que funciona con cualquier tarjeta gráfica\n"
-"moderna. Luego elija \"Probar nuevamente\" para estar seguro que funciona."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finalmente, se le preguntará si desea ver la interfaz gráfica en el\n"
-"arranque. Note que esta pregunta se le formula incluso si eligió no probar\n"
-"la configuración. Obviamente, querrá responder \"No\" si su máquina va a\n"
-"actuar como un servidor, o si no tuvo éxito con la configuración de la\n"
-"pantalla."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"El CD-ROM de Mandrake Linux tiene un modo de rescate incorporado. Usted\n"
-"puede acceder al mismo arrancando desde el CD-ROM, presionando la tecla\n"
-">>F1<< durante el arranque y tecleando >>rescue<< en el prompt. Pero en\n"
-"caso que su computadora no pueda arrancar desde el CD-ROM, Usted debería\n"
-"recurrir a este paso al menos en dos situaciones:\n"
-"\n"
-" * cuando instala el cargador de arranque, DrakX sobreescribirá el sector "
-"de\n"
-"arranque (MBR) de su disco principal (a menos que esté utilizando otro\n"
-"administrador de arranque) de forma tal que pueda iniciar o bien Windows o\n"
-"bien GNU/Linux (asumiendo que tiene Windows en su sistema). Si necesita\n"
-"volver a instalar Windows, el proceso de instalación de Microsoft\n"
-"sobreescribirá el sector de arranque, y entonces ¡Usted no podrá iniciar\n"
-"GNU/Linux!\n"
-"\n"
-" * si surge un problema y Usted no puede iniciar GNU/Linux desde el disco\n"
-"rígido, este disquete será la única manera de iniciar GNU/Linux. El mismo\n"
-"contiene una buena cantidad de herramientas del sistema para restaurar un\n"
-"sistema que colapsó debido a una falla de energía, un error de tecleo\n"
-"infortunado, un error en una contraseña, o cualquier otro motivo.\n"
-"\n"
-"Cuando haga clic sobre este paso se le pedirá que inserte un disquete\n"
-"dentro de la disquetera. El disquete que insertará debe estar vacío o\n"
-"contener datos que no necesite. No tendrá que formatearlo ya que DrakX\n"
-"sobreescribirá el disquete por completo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Ahora necesita elegir el lugar de su disco rígido donde se instalará su\n"
-"sistema operativo Mandrake Linux. Si su disco rígido está vacío o si un\n"
-"sistema operativo existente está utilizando todo el espacio disponible,\n"
-"necesitará particionar el disco. Básicamente, particionar un disco rígido\n"
-"consiste en dividirlo lógicamente para crear espacio para instalar su\n"
-"sistema Mandrake Linux nuevo.\n"
-"\n"
-"Debido a que los efectos del particionado por lo general son irreversibles,\n"
-"el particionado puede ser intimidante y estresante si Usted es un usuario\n"
-"inexperto. Por fortuna, hay un asistente que simplifica este proceso. Antes\n"
-"de comenzar, por favor consulte el manual y tómese su tiempo.\n"
-"\n"
-"Si está corriendo la instalación en modo Experto, ingresará a DiskDrake, la\n"
-"herramienta de particionado de Mandrake Linux, que le permite un ajuste\n"
-"fino de sus particiones. Vea la sección DiskDrake en la \"Guía del\n"
-"Usuario\". Desde la interfaz de instalación, puede utilizar los asistentes\n"
-"como se describe aquí haciendo clic sobre el botón \"Asistente\" del\n"
-"diálogo.\n"
-"\n"
-"Si ya se han definido particiones, ya sea de una instalación previa o por\n"
-"medio de otra herramienta de particionado, simplemente seleccione esas para\n"
-"instalar su sistema Linux.\n"
-"\n"
-"Si no hay particiones definidas, necesitará crearlas usando el asistente.\n"
-"Dependiendo de la configuración de su disco rígido, están disponibles\n"
-"varias opciones:\n"
-"\n"
-" * \"Usar espacio libre\": esta opción simplemente llevará a un "
-"particionado\n"
-"automático de su(s) disco(s) vacío(s). No se le pedirán más detalles ni se\n"
-"le formularán más preguntas.\n"
-"\n"
-" * \"Usar partición existente\": el asistente ha detectado una o más\n"
-"particiones Linux existentes en su disco rígido. Si desea utilizarlas,\n"
-"elija esta opción.\n"
-"\n"
-" * \"Usar el espacio libre en la partición Windows\": si MicrosoftWindows\n"
-"está instalado en su disco rígido y ocupa todo el espacio disponible en el\n"
-"mismo, Usted tiene que liberar espacio para los datos de Linux. Para\n"
-"hacerlo, puede borrar su partición y datos MicrosoftWindows (vea las\n"
-"soluciones \"Borrar el disco completo\" o \"Modo experto\") o cambie el\n"
-"tamaño de su partición Windows. El cambio de tamaño se puede realizar sin\n"
-"la pérdida de datos, siempre y cuando Usted ha desfragmentado con\n"
-"anterioridad la partición Windows. También se recomienda hacer una copia de\n"
-"respaldo de sus datos.. Se recomienda esta solución si desea utilizar tanto\n"
-"Mandrake Linux como MicrosoftWindows en la misma computadora.\n"
-"\n"
-"   Antes de elegir esta opción, por favor comprenda que después de este\n"
-"procedimiento, el tamaño de su partición MicrosoftWindows será más pequeño\n"
-"que ahora. Tendrá menos espacio bajo MicrosoftWindows para almacenar sus\n"
-"datos o instalar software nuevo.\n"
-"\n"
-" * \"Borrar el disco entero\": si desea borrar todos los datos y todas las\n"
-"particiones presentes en su disco rígido y reemplazarlas con su nuevo\n"
-"sistema Mandrake Linux, elija esta opción. Tenga cuidado con esta solución\n"
-"ya que no podrá revertir su elección después de confirmarla.\n"
-"\n"
-"   !! Si elige esta opción, se perderán todos los datos en su disco. !!\n"
-"\n"
-" * \"Quitar Windows\": simplemente esto borrará todo en el disco y "
-"comenzará\n"
-"particionando todo desde cero. Se perderán todos los datos en su disco.\n"
-"\n"
-"   !! Si elige esta opción, se perderán todos los datos en su disco. !!\n"
-"\n"
-" * \"Modo experto\": elija esta opción si desea particionar manualmente su\n"
-"disco rígido. Tenga cuidado - esta es una elección potente pero peligrosa.\n"
-"Puede perder todos sus datos con facilidad. Por lo tanto, no elija esta\n"
-"opción a menos que sepa lo que está haciendo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Aquí tiene. Ahora la instalación está completa y su sistema GNU/Linux está\n"
-"listo para ser utilizado. Simplemente haga clic sobre \"Aceptar\" para\n"
-"volver a arrancar el sistema. Puede iniciar GNU/Linux o Windows, cualquiera\n"
-"que prefiera (si está usando el arranque dual) tan pronto como su máquina\n"
-"haya vuelto a arrancar.\n"
-"\n"
-"El botón \"Avanzadas\" (sólo en modo Experto) le muestra dos botones más\n"
-"para:\n"
-"\n"
-" * \"Generar un disquete de instalación automática\": para crear un "
-"disquete\n"
-"de instalación que realizará una instalación completa sin la asistencia de\n"
-"un operador, similar a la instalación que ha configurado recién.\n"
-"\n"
-"   Note que hay dos opciones diferentes disponibles después de hacer clic\n"
-"sobre el botón:\n"
-"\n"
-"    * \"Reproducir\". Esta es una instalación parcialmente automatizada ya "
-"que\n"
-"la etapa de particionado (y sólo esta etapa) permanece interactiva.\n"
-"\n"
-"    * \"Automatizada\". Instalación completamente automatizada: el disco "
-"rígido\n"
-"se sobreescribe por completo, y se pierden todos los datos.\n"
-"\n"
-"   Esta característica es muy útil cuando se instala una cantidad grande de\n"
-"máquinas similares. Vea la sección Auto install (en inglés) en nuestro\n"
-"sitio web.\n"
-"\n"
-" * \"Guardar selección de paquetes\"(*): guarda la selección de paquetes\n"
-"como se hizo con anterioridad. Luego, cuando haga otra instalación, inserte\n"
-"el disquete en la disquetera y ejecute la instalación yendo a la pantalla\n"
-"de ayuda con [F1], e ingrese >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Necesita un disquete formateado con FAT (para crear uno bajo GNU/Linux\n"
-"teclee \"mformat a:\")"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Se debe formatear cualquier partición nueva que ha sido definida para que\n"
-"se pueda utilizar (formatear significa crear un sistema de archivos).\n"
-"\n"
-"Puede desear volver a formatear algunas particiones ya existentes para\n"
-"borrar cualquier dato que pudieran contener. Si así lo desea, por favor\n"
-"seleccione también dichas particiones.\n"
-"\n"
-"Por favor note que no es necesario volver a formatear todas las particiones\n"
-"pre-existentes. Debe volver a formatear las particiones que contienen el\n"
-"sistema operativo (tales como \"/\", \"/usr\" o \"/var\") pero no tiene que\n"
-"volver a formatear particiones que contienen datos que desea preservar\n"
-"(típicamente \"/home\").\n"
-"\n"
-"Tenga sumo cuidado cuando selecciona las particiones. Después de formatear,\n"
-"se borrarán todos los datos en las particiones seleccionadas y no podrá\n"
-"recuperarlos en absoluto.\n"
-"\n"
-"Haga clic sobre \"Aceptar\" cuando esté listo para formatear las\n"
-"particiones.\n"
-"\n"
-"Haga clic sobre \"Cancelar\" si desea elegir otra partición para la\n"
-"instalación de su sistema operativo Mandrake Linux nuevo.\n"
-"\n"
-"Haga clic sobre \"Avanzado\" si desea seleccionar las particiones en las\n"
-"que se buscarán bloques defectuosos en el disco."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"En este momento se está instalando su sistema operativo Mandrake Linux\n"
-"nuevo. Dependiendo de la cantidad de paquetes que instalará y de la\n"
-"velocidad de su computadora, esta operación puede tomar desde unos pocos\n"
-"minutos hasta una cantidad de tiempo significativa.\n"
-"\n"
-"Por favor, tenga paciencia."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Puede ser que cuando está instalando Mandrake Linux algunos paquetes se\n"
-"hayan actualizado desde la publicación inicial. Se pueden haber corregido\n"
-"algunos errores, y solucionado problemas de seguridad. Para permitir que\n"
-"Usted se beneficie de estas actualizaciones, ahora se le propone\n"
-"transferirlas desde la Internet. Elija \"Sí\" si tiene funcionando una\n"
-"conexión con la Internet, o \"No\" si prefiere instalar los paquetes\n"
-"actualizados más tarde.\n"
-"\n"
-"Si elije \"Sí\" se muestra una lista de lugares desde los que se pueden\n"
-"obtener las actualizaciones. Elija el más cercano a Usted. Luego aparece un\n"
-"árbol de selección de paquetes: revise la selección y presione \"Instalar\"\n"
-"para transferir e instalar los paquetes seleccionados, o \"Cancelar\" para\n"
-"abortar."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Antes de continuar, debería leer cuidadosamente los términos de la\n"
-"licencia. Los mismos cubren a toda la distribución Mandrake Linux, y si\n"
-"Usted no está de acuerdo con todos los términos en la misma, haga clic\n"
-"sobre el botón \"Rechazar\". Esto terminará la instalación inmediatamente.\n"
-"Para continuar con la instalación, haga clic sobre el botón \"Aceptar\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"En este punto, es tiempo de elegir el nivel de seguridad deseado para su\n"
-"máquina. Como regla general, cuanto más expuesta está la máquina, y cuantos\n"
-"más cruciales sean los datos que tenga almacenados el nivel de seguridad en\n"
-"la misma deberá ser más alto. Sin embargo, un nivel de seguridad más alto\n"
-"generalmente se obtiene a expensas de la facilidad de uso. Consulte el\n"
-"capítulo \"msec\" del \"Manual de Referencia\" para obtener más información\n"
-"sobre el significado de dichos niveles.\n"
-"\n"
-"Si no sabe que elegir, mantenga la opción predeterminada."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Ahora necesita elegir qué particiones se utilizarán para la instalación de\n"
-"su sistema Mandrake Linux. Si las particiones ya han sido definidas, ya sea\n"
-"por una instalación previa de GNU/Linux o con otra herramienta de\n"
-"particionado, puede utilizarlas. En caso contrario se deben definir\n"
-"particiones en el disco rígido.\n"
-"\n"
-"Para crear particiones, primero debe seleccionar un disco rígido. Puede\n"
-"seleccionar el disco a particionar haciendo clic sobre \"hda\" para el\n"
-"primer disco IDE, \"hdb\" para el segundo, \"sda\" para el primer disco\n"
-"SCSI y así sucesivamente.\n"
-"\n"
-"Para particionar el disco rígido seleccionado, puede utilizar estas\n"
-"opciones:\n"
-"\n"
-" * \"Borrar todo\": esta opción borra todas las particiones sobre el disco\n"
-"seleccionado.\n"
-"\n"
-" * \"Asignación automática\": esta opción le permite crear particiones\n"
-"\"Ext2\" y swap automáticamente en el espacio libre de su disco rígido.\n"
-"\n"
-" * \"Rescatar tabla de particiones\": si su tabla de particiones está\n"
-"dañada, puede intentar recuperarla usando esta opción. Por favor, tenga\n"
-"cuidado y recuerde que puede fallar.\n"
-"\n"
-" * \"Más\": le da acceso a características adicionales:\n"
-"\n"
-"    * \"Guardar tabla de particiones\": guarda la tabla de particiones en "
-"un\n"
-"disquete. Útil para recuperar la tabla de particiones más adelante en caso\n"
-"que sea necesario. Es altamente recomendable realizar este paso.\n"
-"\n"
-"    * \"Recuperar tabla de particiones\": esta opción le permitirá "
-"restaurar\n"
-"una tabla de particiones guardada previamente en un disquete.\n"
-"\n"
-"    * \"Rescatar tabla de particiones\": si su tabla de particiones está "
-"dañada\n"
-"puede intentar recuperarla utilizando esta opción. Por favor, tenga cuidado\n"
-"y recuerde que puede fallar.\n"
-"\n"
-"    * \"Volver a cargar\": descarta todos los cambios y carga su tabla de\n"
-"particiones inicial.\n"
-"\n"
-"    * \"Montaje automático de soportes removibles\": si desmarca esta "
-"opción\n"
-"los usuarios estarán forzados a montar y desmontar manualmente los soportes\n"
-"removibles como los disquetes y los CD-ROMs.\n"
-"\n"
-" * \"Asistente\": use esta opción si desea utilizar un asistente para\n"
-"particionar su disco rígido. Se recomienda esto si no tiene un buen\n"
-"conocimiento del particionado.\n"
-"\n"
-" * \"Deshacer\": use esta opción para cancelar sus cambios.\n"
-"\n"
-" * \"Cambiar a modo normal/experto\": permite realizar acciones adicionales\n"
-"sobre las particiones (tipo, opciones, formatear) y brinda más información.\n"
-"\n"
-" * \"Hecho\": cuando ha terminado de particionar su disco rígido, esto\n"
-"guardará sus cambios en el disco.\n"
-"\n"
-"Nota: todas las opciones son accesibles por medio del teclado. Navegue a\n"
-"través de las particiones usando [Tab] y las flechas [Arriba/Abajo].\n"
-"\n"
-"Cuando se selecciona una partición, puede utilizar:\n"
-"\n"
-" * Ctrl-c para crear una partición nueva (cuando está seleccionada una\n"
-"partición vacía);\n"
-"\n"
-" * Ctrl-d para borrar una partición;\n"
-"\n"
-" * Ctrl-m para configurar el punto de montaje.\n"
-"\n"
-"Para obtener información sobre los distintos tipos de sistemas de archivos\n"
-"disponibles, por favor lea el capítulo acerca de ext2fs del \"Manual de\n"
-"Referencia\".\n"
-"\n"
-"Si está instalando en una máquina PPC, querrá crear una pequeña partición\n"
-"HFS de \"bootstrap\" de al menos 1MB que será utilizada por el cargador de\n"
-"arranque yaboot. Si opta por hacer la partición un poco más grande, digamos\n"
-"50 MB, puede ver que es un lugar útil para almacenar un núcleo y ramdisk\n"
-"alternativos para arrancar en situaciones de emergencia."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Se ha detectado más de una partición MicrosoftWindows en su disco rígido.\n"
-"Por favor, elija aquella a la cual desea cambiarle el tamaño para poder\n"
-"instalar su sistema operativo Mandrake Linux nuevo.\n"
-"\n"
-"Cada partición se lista como sigue: \"Nombre Linux\", \"Nombre Windows\"\n"
-"\"Capacidad\".\n"
-"\n"
-"\"Nombre Linux\" está estructurado: \"tipo de disco rígido\", \"número de\n"
-"disco rígido\", \"número de partición\" (por ejemplo, \"hda1\").\n"
-"\n"
-"\"Tipo de disco rígido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
-"el mismo es un disco SCSI.\n"
-"\n"
-"\"Número de disco rígido\" siempre es una letra que sigue a \"hd\" o a\n"
-"\"sd\". Para los discos IDE:\n"
-"\n"
-" * \"a\" significa \"disco rígido maestro en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"b\" significa \"disco rígido esclavo en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"c\" significa \"disco rígido maestro en la controladora IDE\n"
-"secundaria\",\n"
-"\n"
-" * \"d\" significa \"disco rígido esclavo en la controladora IDE\n"
-"secundaria\".\n"
-"\n"
-"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
-"significa \"segunda SCSI ID menor\", etc.\n"
-"\n"
-"\"Nombre Windows\" es la letra de su unidad de disco bajo Windows (el\n"
-"primer disco o partición se denomina \"C:\")."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Por favor, tenga paciencia. Esta operación puede tomar varios minutos."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX ahora necesita saber si desea realizar una instalación por defecto\n"
-"(\"Recomendada\") o si desea tener un control mayor (\"Experto\"). También\n"
-"puede elegir realizar una instalación nueva o una actualización de un\n"
-"sistema Mandrake Linux existente:\n"
-"\n"
-" * \"Instalar\": el sistema anterior se borrará por completo. De hecho,\n"
-"dependiendo de lo que su máquina contiene actualmente, podrá mantener\n"
-"algunas particiones antiguas (Linux u otras) sin cambios;\n"
-"\n"
-" * \"Actualización\": esta clase de instalación le permite simplemente\n"
-"actualizar los paquetes que en este momento están instalados en su sistema\n"
-"Mandrake Linux. La misma mantiene las particiones corrientes de sus discos\n"
-"así como también las configuraciones de usuarios. Todos los otros pasos de\n"
-"instalación permanecen disponibles con respecto a la instalación simple;\n"
-"\n"
-" * \"Sólo actualizar paquetes\": esta clase completamente nueva le permite\n"
-"actualizar un sistema Mandrake Linux existente a la vez que mantiene todas\n"
-"las configuraciones del sistema sin cambios. También es posible añadir\n"
-"paquetes nuevos a la instalación corriente.\n"
-"\n"
-"Las actualizaciones deberían funcionar sin problemas para los sistemas\n"
-"Mandrake Linux comenzando desde la versión \"8.1\".\n"
-"\n"
-"Dependiendo de su conocimiento de GNU/Linux, por favor elija una de los\n"
-"opciones siguientes:\n"
-"\n"
-" * Recomendada: elija esta si nunca ha instalado un sistema operativo\n"
-"GNU/Linux. La instalación será muy fácil y sólo se le formularán unas pocas\n"
-"preguntas;\n"
-"\n"
-" * Experto: si tiene un conocimiento bueno de GNU/Linux, puede elegir esta\n"
-"clase de instalación. La instalación experta le permitirá realizar una\n"
-"instalación altamente personalizada. Contestar a algunas de las preguntas\n"
-"puede ser difícil si no tiene un buen conocimiento de GNU/Linux, entonces\n"
-"no elija esto a menos que sepa lo que está haciendo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalmente, DrakX selecciona el teclado adecuado para Usted (dependiendo\n"
-"del idioma que eligió) y Usted ni siquiera verá este paso. Sin embargo,\n"
-"podría no tener un teclado que se corresponde exactamente con su idioma:\n"
-"por ejemplo, si Usted es una persona hispano-parlante que está en Argentina\n"
-"o Méjico, su teclado será un teclado Latinoamericano, pero si está en\n"
-"España será uno Español. En ambos casos, Usted tendrá que volver a este\n"
-"paso de la instalación y elegir un teclado apropiado de la lista.\n"
-"\n"
-"Haga clic sobre el botón \"Más\" para que se le presente la lista completa\n"
-"de los teclados soportados."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Por favor, elija su idioma preferido para la instalación y el uso del\n"
-"sistema.\n"
-"\n"
-"Al hacer clic sobre el botón \"Avanzado\" podrá seleccionar otros idiomas\n"
-"para instalar en su estación de trabajo. Seleccionar otros idiomas\n"
-"instalará los archivos específicos para la documentación del sistema y las\n"
-"aplicaciones. Por ejemplo, si albergará a gente de Francia en su máquina,\n"
-"seleccione Español como idioma principal en la vista de árbol y en la\n"
-"sección avanzada haga clic sobre la estrella gris que corresponde a\n"
-"\"Francés|Francia\".\n"
-"\n"
-"Note que se pueden instalar múltiples idiomas. Una vez que ha seleccionado\n"
-"cualquier idioma adicional haga clic sobre el botón \"Aceptar\" para\n"
-"continuar."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"DrakX generalmente detecta la cantidad de botones que tiene su ratón. Si\n"
-"no, asume que Usted tiene un ratón de dos botones y lo configurará para que\n"
-"emule el tercer botón. DrakX sabrá automáticamente si es un ratón PS/2,\n"
-"serie o USB.\n"
-"\n"
-"Si desea especificar un tipo de ratón diferente, seleccione el tipo\n"
-"apropiado de la lista que se proporciona.\n"
-"\n"
-"Si elije un ratón distinto al predeterminado, se le presentará una pantalla\n"
-"de prueba. Use los botones y la rueda para verificar que la configuración\n"
-"es correcta. Si el ratón no está funcionando correctamente, presione la\n"
-"barra espaciadora o [Intro] para \"Cancelar\" y vuelva a elegir."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Por favor seleccione el puerto correcto. Por ejemplo, el puerto \"COM1\"\n"
-"bajo Windows se denomina \"ttyS0\" bajo GNU/Linux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Este es el punto de decisión más crucial para la seguridad de su sistema\n"
-"GNU/Linux: tendrá que ingresar la contraseña de \"root\". \"root\" es el\n"
-"administrador del sistema y es el único autorizado a hacer actualizaciones,\n"
-"agregar usuarios, cambiar la configuración general del sistema, etc.\n"
-"Resumiendo, ¡\"root\" puede hacer de todo!. Es por esto que deberá elegir\n"
-"una contraseña que sea difícil de adivinar DrakX le dirá si la que eligió\n"
-"es demasiado fácil. Como puede ver, puede optar por no ingresar una\n"
-"contraseña, pero le recomendamos encarecidamente que ingrese una, aunque\n"
-"sea sólo por una razón: no piense que debido a que Usted arrancó GNU/Linux,\n"
-"sus otros sistemas operativos están seguros contra los errores. Eso no es\n"
-"cierto debido a que \"root\" puede sobrepasar todas las limitaciones y\n"
-"borrar, sin intención, todos los datos que se encuentran en las particiones\n"
-"accediendo a las mismas sin el cuidado suficiente. Es por esto que es\n"
-"importante que sea difícil convertirse en \"root\".\n"
-"\n"
-"La contraseña debería ser una mezcla de caracteres alfanuméricos y tener al\n"
-"menos una longitud de 8 caracteres. Nunca escriba la contraseña de \"root\"\n"
-"eso hace que sea muy fácil comprometer a un sistema.\n"
-"\n"
-"Sin embargo, por favor no haga la contraseña muy larga o complicada debido\n"
-"a que Usted debe poder recordarla sin realizar mucho esfuerzo.\n"
-"\n"
-"La contraseña no se mostrará en la pantalla a medida que Usted la teclee.\n"
-"Por lo tanto, tendrá que teclear la contraseña dos veces para reducir la\n"
-"posibilidad de un error de tecleo. Si ocurre que Usted comete dos veces el\n"
-"mismo error de tecleo, tendrá que utilizar esta contraseña \"incorrecta\"\n"
-"la primera vez que se conecte.\n"
-"\n"
-"En modo experto, se le preguntará si se conectará a un servidor de\n"
-"autenticación, por ejemplo NIS o LDAP.\n"
-"\n"
-"Si su red usa el protocolo LDAP (o NIS) para la autenticación, seleccione\n"
-"\"LDAP\" (o \"NIS\") como autenticación. Si no sabe, pregunte al\n"
-"administrador de su red.\n"
-"\n"
-"Si su computadora no está conectada a alguna red administrada, querrá\n"
-"elegir \"Archivos locales\" para la autenticación."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO y grub son cargadores de arranque para GNU/Linux. Normalmente, esta\n"
-"etapa está completamente automatizada. De hecho, DrakX analiza el sector de\n"
-"arranque del disco y actúa en función de lo que encuentre allí:\n"
-"\n"
-" * si encuentra un sector de arranque de Windows, lo reemplazará con un\n"
-"sector de arranque de grub/LILO de forma tal que Usted pueda arrancar\n"
-"GNU/Linux u otro sistema operativo;\n"
-"\n"
-" * si encuentra un sector de arranque de grub o LILO, lo reemplazará con "
-"uno\n"
-"nuevo;\n"
-"\n"
-"En caso de duda, DrakX mostrará un diálogo con varias opciones.\n"
-"\n"
-" * \"Cargador de arranque a usar\": tiene tres opciones:\n"
-"\n"
-"    * \"LILO con menú gráfico\": si prefiere a LILO con su interfaz "
-"gráfica.\n"
-"\n"
-"    * \"GRUB\": si prefiere a grub (menú de texto).\n"
-"\n"
-"    * \"LILO con menú de texto\": si prefiere a LILO con su interfaz de "
-"texto.\n"
-"\n"
-" * \"Dispositivo de arranque\": en la mayoría de los casos, no cambiará lo\n"
-"predeterminado (\"/dev/hda\"), pero si lo prefiere, el cargador de arranque\n"
-"se puede instalar en el segundo disco rígido (\"/dev/hdb\"), o incluso en\n"
-"un disquete (\"/dev/fd0\").\n"
-"\n"
-" * \"Demora antes de arrancar la imagen predeterminada\": cuando vuelve a\n"
-"arrancar la computadora, esta es la demora que se garantiza al usuario para\n"
-"elegir en el menú del cargador de arranque, una entrada distinta a la\n"
-"predeterminada.\n"
-"\n"
-"!! Tenga presente que si no elige instalar un cargador de arranque\n"
-"(seleccionando \"Cancelar\"), ¡Debe asegurarse que tiene una forma de\n"
-"arrancar a su sistema Mandrake Linux! También debe asegurarse que sabe lo\n"
-"que hace antes de cambiar cualquier opción. !!\n"
-"\n"
-"Haciendo clic sobre el botón \"Avanzadas\" en este diálogo se le ofrecerán\n"
-"muchas opciones avanzadas que están reservadas para el usuario experto.\n"
-"\n"
-"Luego que haya configurado los parámetros generales del cargador de\n"
-"arranque se mostrará la lista de opciones de arranque que estarán\n"
-"disponibles al momento de arrancar.\n"
-"\n"
-"Si hay otro sistema operativo instalado en su máquina, se agregará el mismo\n"
-"automáticamente al menú de arranque. Aquí puede elegir ajustar las opciones\n"
-"existentes. Seleccione una entrada y haga clic sobre \"Modificar\" para\n"
-"cambiar los parámetros de la misma o quitarla; \"Añadir\" crea una entrada\n"
-"nueva; y \"Hecho\" va al paso de instalación siguiente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (el LInux LOader) y grub son cargadores de arranque: permiten arrancar\n"
-"ya sea GNU/Linux como cualquier otro sistema operativo presente en su\n"
-"computadora. Normalmente, estos otros sistemas operativos se detectan e\n"
-"instalan correctamente. Si este no es el caso, puede añadir una entrada a\n"
-"mano en esta pantalla. Tenga cuidado de elegir los parámetros correctos.\n"
-"\n"
-"También puede no desear dar acceso a estos otros sistemas operativos a\n"
-"cualquiera. En ese caso, puede borrar las entradas correspondientes. Pero\n"
-"entonces, ¡necesitará un disquete de arranque para poder arrancar esos\n"
-"otros sistemas operativos!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Debe indicar donde desea colocar la información necesaria para arrancar en\n"
-"GNU/Linux.\n"
-"\n"
-"A menos que sepa exactamente lo que está haciendo, elija \"Primer sector\n"
-"del disco (MBR)\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Aquí seleccionamos un sistema de impresión para que use su computadora.\n"
-"Otros sistemas operativos pueden ofrecerle uno, pero Mandrake Linux le\n"
-"ofrece tres.\n"
-"\n"
-" * \"pdq\"\"print, don't queue\" (imprimir sin poner en cola), es la\n"
-"elección si Usted tiene una conexión directa a su impresora y desea evitar\n"
-"el pánico de los papeles trabados, y no tiene impresora en red alguna.\n"
-"Manejará sólo casos de red muy simples y es algo lento para las redes.\n"
-"Elija \"pdq\" si esta es su luna de miel con GNU/Linux. Después de la\n"
-"instalación puede cambiar sus elecciones ejecutando PrinterDrake desde el\n"
-"Centro de Control Mandrake y eligiendo el modo experto.\n"
-"\n"
-" * \"CUPS\"\"Common Unix Printing System\" (Sistema de Impresión Común de\n"
-"Unix) es excelente imprimiendo en su impresora local y también en la otra\n"
-"punta del planeta. Es simple y puede actuar como servidor o cliente para el\n"
-"sistema de impresión antiguo \"lpd\", por lo que es compatible con los\n"
-"sistemas anteriores. Puede hacer muchas cosas, pero la configuración básica\n"
-"es tan simple como la de \"pdq\". Si necesita que emule a un servidor\n"
-"\"lpd\", debe encender el demonio \"cups-lpd\". Tiene interfaces gráficas\n"
-"para imprimir o elegir las opciones de la impresora.\n"
-"\n"
-" * \"lprNG\"\"line printer daemon New Generation\" (servidor de impresora "
-"de\n"
-"líneas Nueva Generación). Este sistema puede hacer aproximadamente las\n"
-"mismas cosas que los otros, pero imprimirá en impresoras montadas sobre una\n"
-"red Novell, debido a que soporta el protocolo IPX, y puede imprimir\n"
-"directamente a comandos del shell. Si necesita Novell o imprimir a comandos\n"
-"de sin utilizar tuberías, utilice lprNG. De no ser así, se prefiere a CUPS\n"
-"ya que es más simple y es mejor al trabajar sobre redes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX ahora detecta cualquier dispositivo IDE presente en su computadora.\n"
-"También buscará una o más tarjetas SCSI PCI en su sistema. Si se encuentra\n"
-"una tarjeta SCSI DrakX instalará el controlador apropiado automáticamente.\n"
-"\n"
-"Debido a que la detección de hardware a veces no detectará alguna pieza de\n"
-"hardware DrakX le pedirá que confirme si tiene una tarjeta SCSI PCI. Haga\n"
-"clic sobre \"Sí\" si sabe que hay una tarjeta SCSI instalada en su máquina.\n"
-"Se le presentará una lista de tarjetas SCSI de la cual elegir. Haga clic\n"
-"sobre \"No\" si no tiene hardware SCSI. Si no está seguro puede verificar\n"
-"la lista de hardware detectado en su máquina seleccionando \"Ver\n"
-"información sobre el hardware\" y haciendo clic sobre \"Aceptar\". Examine\n"
-"la lista de hardware y luego haga clic sobre el botón \"Aceptar\" para\n"
-"volver a la pregunta sobre la interfaz SCSI.\n"
-"\n"
-"Si tiene que seleccionar su adaptador manualmente, DrakX le preguntará si\n"
-"desea especificar opciones para el mismo. Debería permitir que DrakX sondee\n"
-"el hardware buscando las opciones específicas que necesita el hardware para\n"
-"inicializarse. Por lo general esto funciona bien.\n"
-"\n"
-"Si DrakX no puede sondear las opciones que deben pasarse, necesitará\n"
-"proporcionar manualmente las opciones al controlador. Por favor revise la\n"
-"\"Guía del Usuario\" (capítulo 3, sección \"Recopilando información acerca\n"
-"de su hardware\") en busca de consejos para recopilar los parámetros\n"
-"necesarios a partir de la documentación del hardware, desde el sitio web\n"
-"del fabricante (si tiene acceso a la Internet) o desde MicrosoftWindows (si\n"
-"utilizaba este hardware con Windows en su sistema)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Puede agregar entradas adicionales para Yaboot, ya sea para otros sistemas\n"
-"operativos, núcleos alternativos, o para una imagen de arranque de\n"
-"emergencia.\n"
-"\n"
-"Para otros sistemas operativos, la entrada consiste sólo de una etiqueta y\n"
-"la partición raíz.\n"
-"\n"
-"Para Linux, hay algunas opciones posibles:\n"
-"\n"
-" * Etiqueta: esta es simplemente el nombre que deberá teclear en el prompt\n"
-"de yaboot para seleccionar esta opción de arranque.\n"
-"\n"
-" * Imagen: esta debería ser el nombre del núcleo a arrancar. Típicamente,\n"
-"vmlinux o una variación de vmlinux con una extensión.\n"
-"\n"
-" * Raíz: el dispositivo \"root\" o \"/\" para su instalación Linux.\n"
-"\n"
-" * Añadir: la opción de añadir al núcleo se usa bastante sobre el hardware\n"
-"Apple para asistir en la inicialización del hardware de vídeo, o para\n"
-"habilitar la emulación de los botones del ratón con el teclado para los\n"
-"botones 2do y 3ro del ratón que por lo general no tienen los ratones\n"
-"estándar de Apple. Algunos ejemplos son los siguientes:\n"
-"\n"
-"   video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"   video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: esta opción se puede usar o bien para cargar los módulos\n"
-"iniciales, antes que esté disponible el dispositivo de arranque, o bien\n"
-"cargar una imagen de ramdisk para una situación de arranque de emergencia.\n"
-"\n"
-" * Tamaño de Initrd: generalmente el tamaño por defecto del ramdisk es 4096\n"
-"bytes. Puede usar esta opción si necesita asignar un ramdisk mayor.\n"
-"\n"
-" * Lectura-Escritura: normalmente la partición \"root\" se levanta en modo\n"
-"de sólo lectura, para permitir una verificación del sistema de archivos\n"
-"antes que el sistema se levante por completo. Aquí puede cambiar esta\n"
-"opción.\n"
-"\n"
-" * NoVideo: en caso que el hardware de vídeo de Apple sea excepcionalmente\n"
-"problemático, puede seleccionar esta opción para arrancar en el modo\n"
-"\"novideo\", con soporte nativo para el frame-buffer.\n"
-"\n"
-" * Predeterminada: selecciona a esta entrada como la opción Linux por\n"
-"defecto, que se puede elegir simplemente presionando [Intro] en el prompt\n"
-"de Yaboot. Esta entrada también se marcará con un \"*\", si presiona [Tab]\n"
-"para ver las selecciones del arranque."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot es un cargador de arranque para el hardware NewWorld MacIntosh. El\n"
-"mismo puede arrancar o GNU/Linux, o MacOS o MacOSX si se encuentran en su\n"
-"computadora. Normalmente, estos sistemas operativos se detectan e instalan\n"
-"correctamente. Si este no es el caso, puede agregar una entrada a mano en\n"
-"esta pantalla. Tenga cuidado de elegir los parámetros correctos.\n"
-"\n"
-"Las opciones principales de Yaboot son:\n"
-"\n"
-" * Mensaje de Init: un mensaje de texto simple que se muestra antes del\n"
-"prompt de arranque.\n"
-"\n"
-" * Dispositivo de arranque: indica donde desea colocar la información\n"
-"necesaria para arrancar en GNU/Linux. Generalmente, se configura una\n"
-"partición bootstrap con anterioridad para contener esta información.\n"
-"\n"
-" * Demora de Open Firmware: a diferencia de LILO, hay dos demoras\n"
-"disponibles con Yaboot. La primera se mide en segundos y aquí puede elegir\n"
-"entre CD, arranque OF, MacOS o Linux.\n"
-"\n"
-" * Demora de arranque del núcleo: esta demora es similar a la demora de\n"
-"arranque de LILO. Luego de seleccionar Linux, tendrá esta demora en décimas\n"
-"de segundo antes que se seleccione su descripción del núcleo\n"
-"predeterminada.\n"
-"\n"
-" * ¿Habilitar arranque desde el CD?: marcando esta opción Usted puede "
-"elegir\n"
-"\"C\" para el CD en el primer prompt de arranque.\n"
-"\n"
-" * ¿Habilitar arranque OF?: marcando esta opción Usted puede elegir \"N\"\n"
-"para Open Firmware en el primer prompt de arranque.\n"
-"\n"
-" * SO predeterminado: puede seleccionar qué sistema operativo arrancará por\n"
-"defecto cuando expira la demora de Open Firmware."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Aquí se le presentan varios parámetros que conciernen a su máquina.\n"
-"Dependiendo de su hardware instalado, puede o no, ver las entradas\n"
-"siguientes:\n"
-"\n"
-" * \"Ratón\": verifique la configuración del ratón y haga clic sobre el\n"
-"botón para cambiarla, si es necesario.\n"
-"\n"
-" * \"Teclado\": verifique la configuración de la disposición del teclado y\n"
-"haga clic sobre el botón para cambiarla, si es necesario.\n"
-"\n"
-" * \"Huso horario\": DrakX, de manera predeterminada, adivina su huso\n"
-"horario a partir del idioma que Usted ha elegido. Pero nuevamente, al igual\n"
-"que con la elección del teclado, puede ocurrir que no se encuentre en el\n"
-"país que sugiere el idioma elegido. De ser así, puede necesitar hacer clic\n"
-"sobre el botón \"Huso horario\" para configurar el reloj de acuerdo al huso\n"
-"horario en el que se encuentre.\n"
-"\n"
-" * \"Impresora\": al hacer clic sobre el botón \"Sin impresora\" se abrirá\n"
-"el asistente de configuración de la impresora.\n"
-"\n"
-" * \"Tarjeta de sonido\": si se detecta una tarjeta de sonido en su "
-"sistema,\n"
-"la misma se muestra aquí. Durante la instalación no es posible modificación\n"
-"alguna.\n"
-"\n"
-" * \"Tarjeta de TV\": si se detecta una tarjeta de TV en su sistema, la\n"
-"misma se muestra aquí. Durante la instalación no es posible modificación\n"
-"alguna.\n"
-"\n"
-" * \"Tarjeta RDSI\": si se detecta una tarjeta RDSI en su sistema, la misma\n"
-"se muestra aquí. Puede hacer clic sobre el botón para cambiar los\n"
-"parámetros asociados a la misma."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Elija la unidad de disco que desea borrar para instalar su partición\n"
-"Mandrake Linux nueva. Tenga cuidado, ¡se perderán todos los datos de la\n"
-"misma y no se podrán recuperar!."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Haga clic sobre \"Aceptar\" si desea borrar todos los datos y particiones\n"
-"presentes en esta unidad de disco. Tenga cuidado, luego de hacer clic sobre\n"
-"\"Aceptar\", no podrá recuperar los datos y las particiones presentes en\n"
-"esta unidad de disco, incluyendo los datos de Windows.\n"
-"\n"
-"Haga clic sobre \"Cancelar\" para cancelar esta operación sin perder los\n"
-"datos y las particiones presentes en esta unidad de disco."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"No se puede acceder a los módulos del núcleo correspondientes a su núcleo "
-"(no se encuentra el archivo %s), esto generalmente singnifica que su "
-"disquete de arranque no contiene un núcleo de misma versión que el soporte "
-"de instalación (haga un nuevo disquete de arranque por favor)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Tú también debes formatear %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Ha seleccionado los siguientes servidores: %s\n"
-"\n"
-"\n"
-"Estos servidores se activan por defecto. No se les conocen problemas de\n"
-"seguridad, pero se pueden encontrar problemas nuevos. En ese caso, "
-"debeasegurarse de\n"
-"actualizarlos tan pronto como sea posible.\n"
-"\n"
-"\n"
-"¿Realmente desea instalar estos servidores?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "No se puede usar difusión sin un dominio NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inserte un disquete formateado con FAT en la disquetera %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Este disquete no está formateado con FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para utilizar esta selección de paquetes salvada, arranque la instalación "
-"con \"linux defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Error al leer el archivo %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Algún hardware de su computadora necesita controladores \"propietarios\" "
-"para funcionar.\n"
-"Puede encontrar información sobre ellos en: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Debe tener una partición raíz.\n"
-"Para ello, cree una partición (o haga clic sobre una que ya existe).\n"
-"Luego elija la acción \"Punto de montaje\" y defínalo como '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Debe tener una partición de intercambio"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"No dispone de una partición de intercambio\n"
-"\n"
-"¿Desea continuar de todas formas?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Debe tener una partición FAT montada en /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Usar el espacio libre"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "No hay espacio libre suficiente para asignar las particiones nuevas"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Usar la partición existente"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "No hay ninguna partición existente para usar"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Usar la partición de Windows para loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "¿Qué partición desea usar para Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Elija los tamaños"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Tamaño de la partición raíz en MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Tamaño de la partición de intercambio en MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Usar el espacio libre de la partición Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "¿A qué partición desea cambiarle el tamaño?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Calculando los límites del sistema de archivos Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"El redimensionador de tamaño de la FAT no puede gestionar su partición, \n"
-"ocurrió el error siguiente: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Su partición Windows está muy fragmentada, por favor primero ejecute \"defrag"
-"\""
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"¡ADVERTENCIA!\n"
-"\n"
-"Ahora DrakX cambiará el tamaño de su partición Windows. Proceda con "
-"cuidado:\n"
-"esta operación es peligrosa. Si aún no lo hizo, primero debería salir de\n"
-"la instalación, ejecutar scandisk bajo Windows (y opcionalmente ejecutar "
-"defrag),\n"
-"y luego volver a iniciar la instalación. También debería hacer una copia de\n"
-" seguridad de sus datos.\n"
-"Cuando esté seguro, pulse sobre Aceptar."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "¿Qué tamaño desea conservar para windows en la"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partición %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Falló el redimensionado de la FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"No hay particiones FAT para redimensionar o para usar como loopback (o no "
-"queda espacio suficiente)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Borrar el disco entero"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Quitar Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Tiene más de un disco rígido, ¿sobre cuál desea instalar Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Se perderán TODAS las particiones y sus datos en la unidad  %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Particionamiento de disco personalizado"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Usar fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Ahora puede particionar %s.\n"
-"Cuando haya terminado, no se olvide de guardar usando 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "No queda espacio libre suficiente en la partición de Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "No se puede encontrar nada de espacio para instalar"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"El asistente de particionamiento de DrakX encontró las siguientes soluciones:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Falló el particionamiento: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Levantando la red"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Bajando la red"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ocurrió un error y no se puede gestionar de forma adecuada.\n"
-"Continúe bajo su propio riesgo."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punto de montaje %s duplicado"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Algunos paquetes importantes no fueron instalados correctamente.\n"
-"Seguramente su lector de CD o su CD de instalación sean defectuosos.\n"
-"Compruebe el CD de instalación en un sistema ya existente con el comando:\n"
-"  rpm -qpl Mandrake/RPMS/*.rpm\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bienvenido a %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ninguna disquetera disponible"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrando en la etapa '%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Su sistema tiene pocos recursos. Puede tener algún problema instalando\n"
-"Mandrake Linux. Si eso ocurre, puede intentar una instalación tipo texto.\n"
-"Para ello, presione 'F1' cuando arranque desde el CDROM, e introduzca 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Tipo de instalación"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Por favor, elija uno de los siguentes tipos de instalación:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"El tamaño total para los grupos que seleccionó es de aproximadamente %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Si desea instalar un tamaño total inferior,\n"
-"elija el porcentaje de paquetes que desea instalar.\n"
-"\n"
-"Un porcentaje bajo instalará sólo los paquetes más importantes;\n"
-"un porcentaje de 100%% instalará todos los paquetes seleccionados."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Tiene espacio en disco para sólo %d%% de esos paquetes.\n"
-"\n"
-"Si desea instalar menos de esto,\n"
-"elija el porcentaje de paquetes que desea instalar.\n"
-"Un porcentaje bajo instalará sólo los paquetes más importantes;\n"
-"un porcentaje de %d%% instalará todos los que sea posible."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Podrá elegirlos más detalladamente en la etapa siguiente"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Porcentaje de paquetes a instalar"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Selección de grupos de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Selección de paquetes individuales"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tamaño total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Paquete incorrecto"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nombre: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versión: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamaño: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importancia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"No puede seleccionar este paquete porque no hay espacio suficiente para "
-"instalarlo"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Se van a instalar los siguientes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Se van a quitar los siguientes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "No puede seleccionar/deseleccionar este paquete"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Este es un paquete obligatorio, no puede desmarcarlo"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "No puede desmarcar este paquete. Ya está instalado"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Se debe actualizar este paquete\n"
-"¿Está seguro que quiere desmarcarlo?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "No puede desmarcar este paquete. Debe ser actualizado"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Mostrar los paquetes seleccionados automáticamente"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalar"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Cargar/Guardar en un disquete"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Actualizando la selección de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Instalación mínima"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Elija los paquetes que desea instalar"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalando"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Estimando"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tiempo restante "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Preparando la instalación. Espere, por favor"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paquetes"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalando el paquete %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aceptar"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Rechazar"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"¡Cambie su CD-ROM!\n"
-"\n"
-"Inserte el CD-ROM etiquetado como \"%s\" en la unidad y pulse Aceptar cuando "
-"lo  haya hecho.\n"
-"Si no lo posee, pulse Cancelar para cancelar la instalación desde este CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "¿Seguir adelante?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Hubo un error al ordenar los paquetes:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Hubo un error al instalar los paquetes:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Importante\n"
-"\n"
-"Haga el favor de leer cuidadosamente el presente documento. En caso de "
-"desacuerdo\n"
-"con el presente documento, no está autorizado a instalar los demás\n"
-"CDs.  En este caso seleccione 'Rechazar' para seguir la instalación sin\n"
-"estos CDs.\n"
-"\n"
-"\n"
-"Algunos componentes de software contenidos en los siguientes CDs no\n"
-"están sometidos a las licencias GPL o similares que permitan la copia,\n"
-"adaptación o redistribución.  Cada uno de los componentes de software\n"
-"esta distribuido bajo los términos y condiciones de un acuerdo de\n"
-"licencia propio. Por favor, dirájase a éste y acéptelo antes de instalarlo,\n"
-"usarlo o redistribuirlo. Generalmente, estas licencias no autorizan la\n"
-"copia (salvo las destinadas a copias de seguridad), la distribución, "
-"decompilación,\n"
-"desensamblado, ingeniería inversa, reconstitución de la lógica del\n"
-"programa y/o modificación, salvo en la medida y para las necesidades\n"
-"autorizadas por las leyes vigentes.  Toda violación de la licencia\n"
-"vigente implica generalmente la caducidad de está, sin perjuicio a\n"
-"todos los demás derechos o acciones dirigidos en contra de Ud. Salvo si\n"
-"el acuerdo de licencia lo autoriza, no puede instalar estos programas\n"
-"en más de una máquina, ni adaptarlos para un uso en red. Si fuese\n"
-"necesario, contacte con el distribuidor de cada programa para\n"
-"obtener licencias adicionales. La distribución a terceros de copias de\n"
-"los programas o de la documentación que lo acompaña generalmente\n"
-"suele estar prohibida.\n"
-"\n"
-"\n"
-"Todos los derechos, títulos e intereses de esos programas son la\n"
-"propiedad exclusiva de sus autores respectivos y están protegidos por el\n"
-"derecho de la propiedad intelectual y otras leyes aplicables al derecho\n"
-"del software.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ocurrió un error"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "¿Realmente desea salir de la instalación?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Acuerdo de licencia"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"EL PRESENTE TEXTO ES UNA TRADUCCIÓN A PROPÓSITO EXCLUSIVAMENTE\n"
-"INFORMATIVO DE LOS TÉRMINOS DE LA LICENCIA DE MANDRAKE LINUX. EN\n"
-"NINGÚN CASO LA PRESENTE TRADUCCIÓN TIENE VALOR LEGAL SIENDO OFICIAL\n"
-"EXCLUSIVAMENTE LA VERSIÓN EN FRANCÉS DE LA LICENCIA DE LINUX-MANDRAKE.\n"
-"No obstante, esperamos que esta traducción ayudará a los que hablan\n"
-"castellano a entenderla mejor.\n"
-"\n"
-"\n"
-"Introducción\n"
-"\n"
-"El conjunto de elementos que incluye el sistema operativo y los\n"
-"diferentes componentes disponibles en la distribución Mandrake Linux\n"
-"se denominarán en adelante \"Programas\". Los programas incluyen en\n"
-"particular, pero de manera no limitativa, el conjunto de programas,\n"
-"procedimientos, reglas y documentaciones relativas al sistema\n"
-"operativo y a los diferentes componentes de la distribución\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licencia\n"
-"\n"
-"Le rogamos leer cuidadosamente este documento. Éste constituye un\n"
-"contrato de licencia entre Ud. (persona física o persona moral) y\n"
-"MandrakeSoft S.A. aplicado a los programas.  El hecho de instalar, \n"
-"duplicar o usar los programas de cualquier manera, indica\n"
-"que acepta explícitamente los términos y condiciones de esta licencia\n"
-"y que está totalmente de acuerdo en lo referente a los términos de la "
-"misma.\n"
-"En caso de no estar de acuerdo con el presente documento, no está\n"
-"autorizado a instalar, duplicar ni usar de ninguna manera\n"
-"este producto. El contrato de licencia sera automáticamente anulado\n"
-"sin aviso previo en el caso que no se cumplan las disposiciones\n"
-"de este documento. En caso de anulación Ud. tendrá que anular\n"
-"inmediatamente todo ejemplar y todas las copias de todos los programas\n"
-"y de todas las documentaciones que constituyen el sistema operativo y\n"
-"los diferentes componentes disponibles en en la distribución\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"2. Garantía y limitaciones de garantía\n"
-"\n"
-"Los programas y la documentación que los acompaña son proporcionados\n"
-"tal cual y sin ninguna garantía.  MandrakeSoft S.A.\n"
-"no se responsabiliza de las consecuencias de un daño directo,\n"
-"especial, indirecto o accesorio, de cualquiera naturaleza que sea, en\n"
-"relación con la utilización de los programas, en particular y de\n"
-"manera no limitada, todos daños resultados por perdidas de\n"
-"beneficio, interrupción de actividad, pérdida de informaciones\n"
-"comerciales u otras perdidas financieras, así que por eventuales\n"
-"condenaciones e indemnizaciones debidas como consecuencia de una decisión "
-"de\n"
-"la justicia, y eso incluso si MandrakeSoft S.A. hubiera sido informada de "
-"la\n"
-"aparición o eventualidad de tales daños.\n"
-"\n"
-"ADVERTENCIA EN CUANTO A LA POSESIÓN O USO DE PROGRAMAS PROHIBIDOS\n"
-"EN CIERTOS PAÍSES\n"
-"\n"
-"En ningún caso, ni MandrakeSoft S.A. ni sus proveedores podrán ser\n"
-"responsabilizados por un perjuicio especial, directo, indirecto o\n"
-"accesorio, de cualquier naturaleza (en particular y de manera\n"
-"no limitada, pérdidas de beneficio, interrupción de actividad,\n"
-"pérdida de informaciones comerciales u otras pérdidas financieras, así\n"
-"como por posibles condenaciones e indemnizaciones debidas\n"
-"consecuentes a una decisión de justicia) que resultaría de la\n"
-"utilización, detención o simple descarga desde uno de los sitios de\n"
-"transferencia de Mandrake Linux de programas prohibidos por la\n"
-"legislación a la que está sometido. Esta advertencia se aplica en\n"
-"particular a algunos componentes de criptografía fuerte incluídos en los\n"
-"programas.\n"
-"\n"
-"\n"
-"3. Licencia GPL y otras licencias\n"
-"\n"
-"Los Programas están constituidos por módulos de programas creados por\n"
-"diversas personas (físicas o legales). Muchos de ellos se\n"
-"distribuyen bajo los términos de la Licencia Pública General GNU\n"
-"(denominada a partir de ahora \"GPL\") u otras licencias parecidas. La "
-"mayoría\n"
-"de estas licencias le permiten copiar, adaptar o redistribuir los\n"
-"módulos de los programas que cubren.  Haga el favor de leer y de aceptar los "
-"términos y\n"
-"condiciones de las licencias que acompañan a cada uno de ellos antes de\n"
-"usarlos. Toda pregunta relativa a la licencia se debe dirigir al autor\n"
-"(o su representante) de dicho programa, y no a MandrakeSoft.  Los\n"
-"programas desarrollados por MandrakeSoft están sometidos a la licencia\n"
-"GPL.  La documentación escrita por MandrakeSoft esta sometida a una\n"
-"licencia especifica.  Haga el favor de dirigirse a la documentación para\n"
-"obtener más información.\n"
-"\n"
-"\n"
-"4. Propiedad intelectual\n"
-"\n"
-"Todos los derechos, títulos e intereses de los diferentes programas\n"
-"son propiedad exclusiva de sus autores respectivos y están protegidos\n"
-"por el derecho de la propiedad intelectual y otras leyes aplicadas a los\n"
-"derechos de los programas.  Las marcas \"Mandrake\" y \"Mandrake Linux\" "
-"así\n"
-"como los logotipos asociados son registrados por MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Disposiciones diversas\n"
-" \n"
-"Si alguna disposición de este contrato de licencia fuera declarada\n"
-"nula, ilegal o inaplicable por un tribunal competente, esta\n"
-"disposición sería excluida del presente contrato.  Sin embargo\n"
-"Ud. seguirá sometido a las otras disposiciones, que tendrán\n"
-"plenos efectos.  El contrato de licencia está regido por las leyes\n"
-"francesas. Toda disputa relativa a los presentes términos será\n"
-"resuelta, preferentemente, por vía amigable.  En caso de desacuerdo con\n"
-"MandrakeSoft S.A., el litigio será tramitado a los tribunales\n"
-"competentes de París, Francia.  Para cualquier pregunta relacionada con\n"
-"este documento, por favor, póngase en contacto con MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclado"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Seleccione la distribución de su teclado."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Aquí tiene la lista completa de teclados disponibles"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "¿Qué tipo de instalación desea?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalación/Actualización"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "¿Es una instalación o una actualización?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recomendada"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Experto"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Actualización"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Sólo actualizar los paquetes."
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Por favor, seleccione el tipo de su ratón."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Puerto del ratón"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Seleccione el puerto serie al que está conectado el ratón, por favor."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulación de los botones"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulación del botón 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulación del botón 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Configurando tarjetas PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Configurando dispositivos IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "no hay particiones disponibles"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Rastreando las particiones para encontrar los puntos de montaje"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Seleccione los puntos de montaje"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"No se puede leer su tabla de particiones, está demasiado deteriorada :(\n"
-"Se intentará seguir y vaciar las particiones malas (¡se perderán TODOS LOS "
-"DATOS!).\n"
-"La otra solución es no permitir que DrakX modifique la tabla de "
-"particiones.\n"
-"(el error es %s)\n"
-"\n"
-"¿Está de acuerdo en perder todas las particiones?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake no pudo leer correctamente la tabla de particiones.\n"
-"¡Continúe bajo su propio riesgo!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"¡No hay 1MB de espacio para bootstrap! La instalación continuará, pero para "
-"arrancar su sistema, necesitará crear la partición bootstrap en DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "No se encontró partición raíz para efectuar la actualización"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partición raíz"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "¿Cual es la partición raíz (/) de su sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Necesita reiniciar el equipo para que se efectúe la modificación de la tabla "
-"de particiones"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Elija las particiones que desea formatear"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "¿Verificar el disco en busca de bloques malos?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formateando las particiones"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creando y formateando el archivo %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Espacio de intercambio insuficiente para completar la instalación, añada un "
-"poco más"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Buscando los paquetes disponibles"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Encontrando los paquetes a actualizar"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Su sistema no tiene espacio suficiente para instalar o actualizar (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Mínima (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomendada (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Por favor, seleccione cargar o guardar la selección de paquetes en "
-"disquete.\n"
-"El formato es el mismo que los disquetes generados para la instalación "
-"automática."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Cargar desde un disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Cargando desde un disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Selección de paquetes"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Introduzca un disquete que contenga la selección de paquetes"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Guardar en un disquete"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "El tamaño seleccionado es mayor que el disponible"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Tipo de instalación."
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"No ha seleccionado ningún grupo de paquetes\n"
-"Elija por favor la mínima instalación que quiera."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Con X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Con documentación básica (¡recomendado!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Instalación mínima \"en serio\" (especialmente sin urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si tiene todos los CDs de la lista siguiente, haga clic sobre \"Aceptar\".\n"
-"Si no tiene ningún CD, haga clic sobre \"Cancelar\".\n"
-"Si sólo le faltan algunos CDs, desmárquelos y haga clic sobre \"Aceptar\"."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM etiquetado como \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Preparando la instalación"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalando el paquete %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configuración posterior a la instalación"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Por favor, inserte el disquete de arranque en la unidad %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Por favor, inserte el disquete de módulos actualizados en la unidad %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Ahora tiene la posibilidad de bajar por la red paquetes específicos\n"
-"durante el procedimiento de instalación, incuídos programas de cifrado.\n"
-"\n"
-"ADVERTENCIA:\n"
-"\n"
-"Debido a las diferencias de los requisitos aplicables a ese tipo de\n"
-"programas por las distintas jurisdicciones, es el cliente y/o el usuario "
-"final\n"
-"de dichos programas quien debe verificar que las leyes de su jurisdicción "
-"le\n"
-"permitan bajar, guardar y/o utilizar dichos programas.\n"
-"\n"
-"En particular el cliente y/o usuario final debe tener un cuidado especial\n"
-"de no violar las leyes de su de su jurisdicción. En el caso de que el "
-"cliente y/o\n"
-"el usuario final no respetase las condiciones de las leyes que le son\n"
-"aplicables, es posible que sea severamente sancionado por la ley.\n"
-"\n"
-"En ningún caso MandrakeSoft ni ninguno de sus fabricantes y/o\n"
-"distribuidores se puede considerar responsable por daños especiales, "
-"directos\n"
-"o indirectos de cualquier tipo (incluyendo, pero sin limitarse a ello, "
-"pérdida\n"
-"de beneficios, ruptura de negocios, pérdida de datos comerciales u otras\n"
-"pérdidas pecuniarias, o eventuales responsabilidades e indemnizaciones\n"
-"a pagar debido a decisiones de la justicia) que puedan ocurrir mediante el\n"
-"uso, posesión o el sólo hecho de descargar de Internet o por otro medio, "
-"programas\n"
-"a los cuales el cliente y/o usuario final tenga acceso después de haber\n"
-"firmado el presente convenio.\n"
-"\n"
-"Para preguntas relativas a este convenio, póngase en contacto con\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Ahora tiene la posibilidad de bajarse paquetes actualizados,\n"
-"que han salido despues de que se haya hecho la distribución.\n"
-"\n"
-"Conseguirá actualizaciones de fallos y de seguridad, pero debe\n"
-"tener una conexión a la Internet configurada para proceder.\n"
-"\n"
-"¿Desea instalar las actualizaciones?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Contactando con el sitio web de Mandrake Linux para obtener la lista de las "
-"réplicas disponibles"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Elija un sitio de réplica del que bajar los paquetes"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Contactando con el sitio de réplica para obtener la lista de los paquetes "
-"disponibles"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "¿Cuál es su huso horario?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Reloj interno puesto a GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Sincronización automática de hora (usando NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Servidor NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Sin impresora"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "¿Tiene una tarjeta de sonido ISA?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Use \"sndconfig\" luego de la instalación para configurar su tarjeta de "
-"sonido"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"No se detectó tarjeta de sonido. Pruebe \"harddrake\" luego de la instalación"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Resumen"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Ratón"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Huso horario"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Impresora"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Tarjeta RDSI"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Tarjeta de sonido"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Tarjeta de TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Archivos locales"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Contraseña de root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Sin contraseña"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Esta contraseña es demasiado simple\n"
-"(tiene que tener por lo menos una longitud de %d caracteres)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentificación"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Autentificación LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Servidor LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Autentificación NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Dominio NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Un disquete de arranque personalizado da la posibilidad de arrancar su "
-"equipo\n"
-"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
-"útil\n"
-"si no desea instalar SILO en su sistema, o si cualquier otro sistema "
-"operativo borra\n"
-"SILO, o si SILO no funciona con su configuración de hardware. Un disquete\n"
-"de arranque personalizado también se puede usar con la imagen de rescate de\n"
-" Mandrake haciendo así mucho más fácil la recuperación en caso de fallo\n"
-"grave del sistema.\n"
-"\n"
-"Si desea crear un disquete de arranque para su sistema, inserte un disquete\n"
-"en la primer disquetera y presione \"Aceptar\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primera disquetera"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Segunda disquetera"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Omitir"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Un disquete de arranque personalizado da la posibilidad de arrancar su "
-"equipo\n"
-"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
-"útil\n"
-"si no desea instalar LILO (o grub) en su sistema, o si cualquier otro "
-"sistema operativo borra\n"
-"LILO, o si LILO no funciona con su configuración de hardware. Un disquete\n"
-"de arranque personalizado también se puede usar con la imagen de rescate de\n"
-"Mandrake haciendo así mucho más fácil la recuperación en caso de fallo\n"
-"grave del sistema. ¿Desea crear un disquete de arranque para su sistema?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(¡ATENCIÓN! Está utilizando  XFS en su partición raíz,\n"
-"la creación de un disquete de arranque en un disquete de 1.44Mb puede "
-"fallar\n"
-"porque XFS necesita un controlador muy grande)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Disculpe, pero no hay ninguna disquetera disponible"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Elija la disquetera que desea usar para crear el disco de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Inserte un disquete en %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Creando el disquete de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Preparando el cargador de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Parece que tiene una máquina desconocida o demasiado\n"
-"antigua. El gestor de arranque yaboot no funcionará.\n"
-"La instalación continuará, pero necesitará\n"
-"utilizar BootX para arrancar su máquina."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "¿Desea usar aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Ocurrió un error al instalar aboot, \n"
-"¿desea forzar la instalación incluso si ello implicara la destrucción de la "
-"primera partición?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instalando cargador de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Falló la instalación del cargador de arranque. Ocurrió el siguiente error:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Puede necesitar cambiar el dispositivo de arranque de Open Firmware para\n"
-" activar el cargador de arranque. Si no ve el prompt del cargador de\n"
-" arranque al reiniciar, mantenga presionado Command-Option-O-F al\n"
-" reiniciar e introduzca:\n"
-" setenv boot-device %s, \\\\:tbxi\n"
-" Luego escriba: shut-down\n"
-"La próxima vez que arranque debería ver el prompt del cargador de arranque."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inserte un disquete en blanco en la unidad %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Creando el disquete de instalación automática"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Algunas de las etapas no fueron completadas.\n"
-"\n"
-"¿Realmente desea salir ahora?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicidades, la instalación está completa.\n"
-"Extraiga el soporte de arranque y presione Intro para reiniciar.\n"
-"\n"
-"Para obtener información sobre correcciones disponibles para esta versión\n"
-"de Mandrake Linux, consulte el archivo de erratas disponible en\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Hay información disponible sobre cómo configurar su sistema en el capítulo "
-"de\n"
-"configuración tras la instalación de la guía de usuario oficial de Mandrake "
-"Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Generar un disquete de instalación automática"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"La instalación automática puede automatizarse por completo si lo desea,\n"
-"¡¡en ese caso se adueñará del disco rígido!!\n"
-"(la intención de esto es instalarlo en otro ordenador).\n"
-"\n"
-"Puede preferir reproducir la instalación.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizada"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Reproducir"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Guardar la selección de paquetes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalación %s de Mandrake Linux"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> entre elementos  | <espacio> seleccionar | <F12> pantalla "
-"sig. "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "no se encuentra kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "falta \"consolehelper\""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Elija un archivo"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avanzada"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Básico"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Espere, por favor"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expandir el árbol"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Contraer el árbol"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Cambiar entre vista plana y ordenada por grupos"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Elección incorrecta, inténtelo de nuevo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "¿Su elección? (por defecto %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Entradas que tendrá que rellenar:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "¿Su elección? (0/1, por defecto '%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Botón `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "¿Desea pulsar este botón?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "¿Su elección? (por defecto %s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Hay muchas cosas para seleccionar (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Por favor, seleccione el primer número del rango de 10 que desee\n"
-"editar, o pulse Intro para continuar.\n"
-"¿Su elección?"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Aviso, una etiqueta cambió:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Reenviar"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Checo (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Alemán"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Español"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finlandés"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francés"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Noruego"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polaco"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruso"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sueco"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Británico"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Estadounidense"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albano"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenio (antiguo)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenio (nuevo)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenio (fonético)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbadján (latín)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Búlgaro (fonético)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Búlgaro (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasileño (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorruso"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Suizo (germánico)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Suizo (francés)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Checo (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Alemán (sin teclas muertas)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danés"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruego)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Sueco)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonio"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiano (estilo \"ruso\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiano (estilo \"latín\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Griego"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Húngaro"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelí"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelí (fonético)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraní"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandés"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiano"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japonés de 106 teclas"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Coreano"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinoamericano"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituano AZERTY (antiguo)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituano AZERTY (nuevo)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituano \"numérico\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituano \"fonético\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Letón"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonio"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandés"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polaco (distribución qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polaco (distribución qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugués"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadiense (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumano (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumano (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Esloveno"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovaco (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovaco (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbio (cirílico)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Teclado tailandés"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Teclado tajik"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (modelo \"F\" tradicional)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (modelo \"Q\" moderno)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucraniano"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Estadounidense (internacional)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"numérico\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavo (latín)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Tecla Alt derecha"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Ambas teclas Shift simultáneamente"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Las teclas Control y Shift simultáneamente"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Tecla CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Las teclas Ctrl y Alt simultáneamente"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Las teclas Alt y Shift simultáneamente"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "La tecla \"Menú\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Tecla \"Windows\" de la izquierda"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Tecla \"Windows\" de la derecha"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Montajes circulares %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Quite los volúmenes lógicos primero\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"El soporte PCMCIA no existe en los núcleos 2.2. Por favor, utilice un núcleo "
-"2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Ratón Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Ratón genérico PS2 con rueda"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 botón"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Ratón de 2 botones genérico"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Genérico"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rueda"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serie"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Ratón de 3 botones genérico"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Ratón Logitech (serie, antiguo tipo C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "ratón bus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 botones"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botones"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ninguno"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Sin ratón"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Pruebe su ratón, por favor."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Para activar el ratón,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "¡MUEVA SU RUEDA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finalizar"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Siguiente ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "¿Es correcto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Conectar a Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La forma más común de conexión ADSL es con pppoe.\n"
-"Algunas conexiones usan pptp, otras pocas usan dhcp.\n"
-"Si no lo sabe con seguridad, elija 'usar pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usar dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usar pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usar pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"¿Qué cliente dhcp desea utilizar?\n"
-"dhcpcd es el predeterminado"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"No se ha detectado ningún adaptador de red ethernet en su sistema.\n"
-"No se puede configurar este tipo de conexión."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Elija la interfaz de red"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Por favor, elija el adaptador de red que desea usar para conectarse a "
-"Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "no se encontró ninguna tarjeta de red"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Configurando la red"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Por favor introduzca el nombre de su máquina (host) si lo conoce.\n"
-"Algunos servidores DHCP necesitan del nombre de la máquina para funcionar.\n"
-"El nombre de su máquina debería ser un nombre de máquina clasificado "
-"completamente,\n"
-"como \"mimaquina.milabo.micompa.com\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nombre de la máquina"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Asistente para la configuración de la red"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Módem RDSI externo"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Tarjeta RDSI interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "¿De qué tipo es su conexión RDSI?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"¿Qué configuración de RDSI prefiere?\n"
-"\n"
-"* La configuración antigua utiliza isdn4net. Tiene herramientas\n"
-"  poderosas, pero es algo complicada de configurar para un recién \n"
-"  llegado, y no es estándar.\n"
-"* La configuración nueva es más fácil de entender, más estándar,\n"
-"  pero con menos herramientas.\n"
-"\n"
-"Le recomendamos la configuración ligera (esto es, la nueva).\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Configuración nueva (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Configuración antigua (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configuración de RDSI"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Seleccione su proveedor.\n"
-" Si no está en la lista, elija No listado"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protocolo de Europa"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocolo de Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protocolo para el resto del mundo"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocolo para el resto del mundo \n"
-" sin canal D (líneas alquiladas)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "¿Qué protocolo desea utilizar?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "¿Qué tipo de tarjeta tiene?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "No lo sé"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Si tiene una tarjeta ISA, los valores de la próxima pantalla deberían ser "
-"correctos.\n"
-"\n"
-"Si tiene una tarjeta PCMCIA, tiene que saber la irq y la e/s de su tarjeta.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abortar"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continuar"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "¿Cuál es su tarjeta RDSI?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Se ha detectado una tarjeta RDSI PCI, pero no se conoce el tipo. Por favor, "
-"seleccione una tarjeta PCI en la pantalla siguiente."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"No se encontró tarjeta PCI RDSI. Por favor, seleccione una en la pantalla "
-"siguiente."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Seleccione el puerto serie al que está conectado su módem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opciones de llamada por módem"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nombre de la conexión"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Número de teléfono"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID de conexión"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Por script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Por terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nombre de dominio"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primer servidor DNS (opcional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Segundo servidor DNS (opcional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Puede desconectarse o volver a configurar su conexión."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Puede volver a configurar su conexión."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Ahora está conectado a Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Se puede conectar a Internet o volver a configurar su conexión."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Ahora no está conectado a Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Conectar"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Desconectar"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Configurar la conexión"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Configuración y conexión a Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ahora vamos a configurar la conexión %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ahora vamos a configurar la conexión %s.\n"
-"\n"
-"\n"
-"Pulse siguiente para continuar."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configuración de la red"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Puesto que está realizando una instalación por red, su red ya está "
-"configurada.\n"
-"Haga clic sobre aceptar para mantener su configuración, o pulse cancelar "
-"para\n"
-"volver a configurar sus conexiones de red y a Internet.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bienvenido al asistente para la configuración de la red\n"
-"\n"
-"Estamos a punto de configurar su conexión de red/Internet.\n"
-"Si no desea usar la detección automática, desmarque la casilla.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Elija el perfil a configurar"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Usar detección automática"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detectando los dispositivos..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Conexión normal por módem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detectada en el puerto %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Conexión RDSI"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detectada %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Conexión ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectada en la interfaz %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Conexión por cable"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "detectada conexión por cable"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Conexión a la red local"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "tarjeta(s) de red detectada(s)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Elija la conexión que desea configurar"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Ha configurado múltiples formas de conectarse a Internet.\n"
-"Seleccione la que quiere utilizar.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Conexión a Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "¿Desea iniciar su conexión al arrancar?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configuración de la red"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "La red necesita ser reiniciada"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Ocurrió un problema mientras se reiniciaba la red: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Felicidades, la configuración de la red y de Internet ha terminado.\n"
-"\n"
-"Ahora se aplicará la configuración a su sistema.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Después de esto, se recomienda que reinicie su entorno X\n"
-"para evitar el problema del cambio del nombre de la máquina."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Ocurrieron problemas durante la configuración.\n"
-"Verifique su conexión con net_monitor o mcc. Si su conexión no funciona, "
-"puede que desee volver a iniciar la configuración"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ADVERTENCIA: Previamente se ha configurado este dispositivo para conectarse "
-"con Internet.\n"
-"Simplemente acepte para mantener la configuración del dispositivo.\n"
-"Al modificar los campos de abajo se ignorará esta configuración."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Por favor, introduzca la dirección IP de esta máquina.\n"
-"Cada valor tiene que introducirse como una dirección IP en notación\n"
-"decimal con puntos (por ejemplo: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configurando el dispositivo de red %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (controlador %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Dirección IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Máscara de red"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Dirección IP automática"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Las direcciones IP deben estar en el formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Por favor, defina el nombre de su máquina.\n"
-"El nombre de su máquina debería ser un nombre de máquina clasificado "
-"completamente,\n"
-"como \"mimaquina.milabo.micompa.com\".También puede introducir la dirección "
-"IP de la pasarela si tiene una"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Servidor DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Pasarela de red (ej %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dispositivo de pasarela de red"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configuración de los proxies"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Id tarjeta de red (útil para portátiles)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "El nombre del proxy debe ser http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "El nombre del proxy debe ser ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configuración de Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "¿Desea intentar conectarse a Internet ahora?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Probando su conexión..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Ahora no está conectado a Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Por motivos de seguridad, ahora será desconectado."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"El sistema no parece estar conectado al Internet.\n"
-"Intente volver a configurar su conexión."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configuración de la conexión"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Por favor, complete o verifique el campo de abajo"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ de la tarjeta"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memoria (DMA) de la tarjeta"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "E/S de la tarjeta"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "E/S_0 de la tarjeta"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "E/S_1 de la tarjeta"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Su número de teléfono personal"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nombre del proveedor (ej proveedor.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Número de teléfono del proveedor"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 del proveedor (opcional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 del proveedor (opcional)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Elija su país"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Modo de marcación"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Velocidad de la conexión"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Demora de la conexión (en seg)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Usuario de la cuenta (nombre de usuario)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Contraseña de la cuenta"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "mount falló: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "La partición extendida no está disponible en esta plataforma"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Tiene un hueco en la tabla de particiones, pero no se puede usar.\n"
-"La única solución es desplazar sus particiones primarias para que el hueco "
-"esté después de las particiones extendidas"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Falló la restauración a partir del archivo %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Archivo de respaldo incorrecto"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Error al escribir en el archivo %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Está ocurriendo algo malo en su disco. \n"
-"Ha fallado una prueba para verificar la integridad de los datos. \n"
-"Esto significa que escribir cualquier cosa en el disco terminará produciendo "
-"basura al azar"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "necesario"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "muy bueno"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bueno"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "quizás"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-"CUPS - Common Unix Printing System (Sistema de impresión común de Unix)"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR de nueva generación"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon (Demonio de impresora de líneas)"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue (Imprimir, no encolar)"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Impresora local"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Impresora remota"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Impresora en un servidor CUPS remoto"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Impresora en un servidor lpd remoto"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Impresora de red (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Impresora en un servidor SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Impresora en un servidor NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Introduzca el URI del dispositivo de impresión"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Filtrar el trabajo en un comando"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Modelo desconocido"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Impresoras locales"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Impresoras remotas"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " en el puerto paralelo \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", impresora USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", dispositivo multifunción en puerto paralelo \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", dispositivo multi-función en USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dispositivo multifunción en HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", dispositivo multifunción"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", imprimiendo en %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr " en servidor LDP \"%s\", impresora \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", host TCP/IP \"%s\", puerto \"%s\""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr " en servidor Windows \"%s\", compartida como \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "en servidor Novell \"%s\", impresora \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", usando comando %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Impresora \"en crudo\" (sin controlador)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(en %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(en esta máquina)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "En servidor CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Por defecto)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Seleccione la conexión de la impresora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "¿Como está conectada la impresora?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Aquí no tiene que configurar las impresoras en los servidores CUPS remotos; "
-"las mismas se detectarán automáticamente."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Configuración de CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Especificar servidor CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Para obtener acceso a las impresoras en servidores CUPS remotos en su red "
-"local nada tiene que configurar; los servidores CUPS le informan a su "
-"máquina automáticamente sobre sus impresoras. En la sección \"Impresoras "
-"remotas\" de la ventana principal de Printerdrake se listan todas las "
-"impresoras que su máquina conoce. Cuando CUPS no está en la red local, tiene "
-"que ingresar la dirección IP del servidor CUPS y, opcionalmente, el número "
-"de puerto para obtener la información de la impresora desde el servidor, de "
-"lo contrario, deje los campos en blanco."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalmente, CUPS se configura automáticamente de acuerdo con su\n"
-"entorno de red, para que pueda acceder a las impresoras de los\n"
-"servidores CUPS de su red local. Si esto no funciona correctamente,\n"
-"desactive la \"Configuración automática de CUPS\" y edite manualmente\n"
-"su archivo /etc/cups/cupsd.conf. No olvide reiniciar CUPS tras esto\n"
-"(comando: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Las direcciones IP deberían parecerse a 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "¡El número de puerto debe ser un número entero!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP del servidor CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Puerto"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Configuración automática de CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Detectando dispositivos..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Probar puertos"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Añadir una impresora nueva"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Bienvenido al asistente de configuración de la impresora\n"
-"\n"
-"Este asistente le permite instalar impresoras locales o remotas para usarlas "
-"desde esta máquina y también desde otras máquinas de la red.\n"
-"\n"
-"Se le solicitará la información necesaria para configurar la impresora y "
-"darle acceso a los controladores de todas las impresoras disponibles, "
-"opciones del controlador y tipos de conexión de impresoras."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Impresora local"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Bienvenido al asistente de configuración de la impresora\n"
-"\n"
-"Este asistente le ayudará a instalar su(s) impresora(s) conectada(s) a esta "
-"computadora.\n"
-"\n"
-"Por favor, conecte su(s) impresora(s) a este ordenador y enciéndala(s). Haga "
-"clic en \"Siguiente\" cuando esté listo, y en \"Cancelar\" si no quiere "
-"configurar ahora su(s) impresora(s).\n"
-"\n"
-"Fíjese en que algunas computadoras pueden colgarse durante la detección "
-"automática de la impresora. En este caso, desactive \"Detectar las "
-"impresoras automáticamente\" para hacer una instalación sin detección "
-"automática. Use el \"Modo experto\" de printerdrake si quiere configurar la "
-"impresión en una impresora remota si printerdrake no la lista "
-"automáticamente."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Detección automática de impresoras"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Enhorabuena, su impresora está instalada y configurada.\n"
-"\n"
-"Puede imprimir usando el comando \"Imprimir\" de su aplicación (normalmente "
-"se encuentra en el menú \"Archivo\").\n"
-"\n"
-"Si quiere añadir, borrar o renombrar una impresora, o si quiere cambiar las "
-"opciones de configuración por defecto (bandeja de entrada de papel, calidad "
-"de impresión, ...), seleccione \"Impresora\" en la sección de \"Hardware\" "
-"del Centro de control de Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Autodetección de impresoras."
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake puede detectar automáticamente sus impresoras de puerto "
-"paralelo y USB conectadas localmente, pero fíjese en que en algunos sistemas "
-"esto PUEDE COLGAR EL SISTEMA E INCLUSO CORROMPER SUS SITEMAS DE ARCHIVOS. "
-"Entonces, HÁGALO BAJO SU PROPIO RIESGO.\n"
-"\n"
-"¿Seguro que desea detectar automáticamente sus impresoras?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Realizar detección automática"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Configurar la impresora manualmente"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Detectada %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Impresora en puerto paralelo \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Impresora USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"No se encontró ninguna impresora local. Para instalar una manualmente, "
-"introduzca un nombre de dispositivo/nombre de archivo en la línea de entrada "
-"(Puertos paralelos: /dev/lp0, /dev/lp1, ..., equivalen a LPT1:, LPT2, ..., "
-"1ª impresora USB: /dev/usb/lp0, 2ª impresora USB: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Debe introducir un dispositivo un un nombre de archivo"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"¡No se encontraró ninguna impresora local!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Las impresoras en red sólo se pueden instalar tras la inslación. Seleccione "
-"\"Hardware\" y luego \"Impresora\" en el Centro de control de Mandrake."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Para instalar impresoras en red, haga clic en \"Cancelar\", cambie al \"Modo "
-"experto\", y haga clic en \"Añadir una nueva impresora\" de nuevo."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Se detectó automáticamente la siguiente impresora, si no es una de las que "
-"quiere configurar, introduzca en la línea de entrada un nombre de "
-"dispositivo/nombre de archivo en la línea de entrada"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Aquí tiene una lista de todas las impresoras detectadas automáticamente. Por "
-"favor, seleccione la impresora que quiere configurar o introduzca un nombre "
-"de dispositivo/nombre de archivo en la línea de entrada"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"La siguiente impresora se detectó automáticamente. La configuración de la "
-"impresora se hará de forma totalmente automatizada. Si su impresora no se "
-"detectó correctamente o si prefiere una configuración personalizada, active "
-"la \"Configuración manual\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Aquí tiene una lista de las impresoras detectadas automáticamente. Por "
-"favor, seleccione la impresora que quiera configurar. La configuración de la "
-"impresora se hará de forma totalmente automatizada. Si su impresora no se "
-"detectó correctamente o si prefiere una configuración personalizada, active "
-"la \"Configuración manual\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Por favor, elija el puerto donde está conectada su impresora o ingrese el "
-"nombre de un dispositivo o archivo en la línea de entrada"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Por favor, elija el puerto al que está conectado su impresora."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(Puertos paralelo: /dev/lp0, /dev/lp1, ..., equivalen a LPT1:, LPT2, ..., "
-"1er impresora USB: /dev/usb/lp0, 2da impresora USB: /dev/usb/lp1, ...) "
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "¡Debe elegir/ingresar una impresora o un dispositivo!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Configuración manual"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"¿Es su impresora un dispositivo multifunción de HP (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 con escáner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Instalando el paquete HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Verificando el dispositivo y configurando HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Instalando el paquete SANE..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Escaneando en su dispositivo multifunción de HP"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Haciendo que el puerto de impresora esté disponible para CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Leyendo base de datos de impresoras ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opciones de la impresora remota lpd"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Para utilizar impresora LPD remota, necesita proporcionar el nombre de host "
-"del servidor de impresión y el nombre de la impresora en ese servidor."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Nombre de host del servidor remoto"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Nombre de la impresora remota"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "¡Falta el nombre del host remoto!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "¡Falta el nombre de la impresora remota!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opciones de la impresora SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Para imprimir en una impresora SMB, necesita proporcionar el nombre del "
-"servidor SMB (¡Note que puede ser diferente al nombre de hostTCP/IP del "
-"mismo!) y posiblemente la dirección IP del servidor de impresión, así como "
-"el nombre del recurso compartido para la impresora que se quiere usar y "
-"cualquier otra información del nombre de usuario, contraseña y grupo de "
-"trabajo que haga falta."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Máquina del servidor SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP del servidor SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nombre del recurso compartido"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grupo de trabajo"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "¡Debe indicar el nombre o la dirección IP del servidor!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "¡No se encuentra el nombre del recurso compartido de Samba!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "¡ADVERTENCIA DE SEGURIDAD!"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Está a punto de configurar la impresión a una cuenta Windows con contraseña. Debido a una falla en la arquitectura del cliente Samba la contraseña se pone como texto plano en la línea de comandos del cliente Samba que se usa para transmitir el trabajo de impresión al servidor Windows. Por lo tanto, es posible que cada usuario de esta máquina vea la clave en pantalla ejecutando \"ps auxwww\".\n"
-"\n"
-"Recomendamos utilizar alguna de las alternativas siguientes (en todos los casos tiene que asegurarse que sólo las máquinas de su red local tienen acceso al servidor Windows, por ejemplo utilizando un cortafuegos):\n"
-"\n"
-"Usar una cuenta sin contraseña en su servidor Windows, por ej. la cuenta \"GUEST\" o una cuenta especial dedicada a la impresión. No quite la protección con contraseña de una cuenta personal o de la cuenta del administrador.\n"
-"\n"
-"Configure a su servidor Windows para que la impresión esté disponible bajo el protocolo LPD y configure la impresión desde esta máquina bajo el tipo de conexión \"%s\" en PrinterDrake.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr "Configure a su servidor Windows para que la impresión esté disponible bajo el protocolo IPP y configure la impresión desde esta máquina bajo el tipo de conexión \"%s\" en PrinterDrake.\n\n"
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Conecte su impresora a un servidor Linux y permita que su(s) máquina(s) Windows se conecten al mismo como un cliente.\n"
-"\n"
-"¿Realmente desea continuar configurando esta impresora como lo está haciendo?"
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opciones de la impresora NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Para imprimir en una impresora NetWare, es necesario escribir el nombre del "
-"servidor de impresión NetWare (¡Note que puede no ser el mismo que el nombre "
-"de la máquina en TCP/IP) así como el nombre de la cola de impresión que "
-"desea usar y el nombre de usuario y la contraseña apropiados."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Servidor de impresión"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nombre de la cola de impresión"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "¡No se encuentra el nombre del servidor NCP!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "¡No se encuentra la cola del servidor NCP!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Opciones de la impresora por socket/TCP"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Para imprimir en una impresora por socket o TCP, necesita proporcionar el "
-"nombre de host de la impresora y opcionalmente el número de puerto. En "
-"servidores HP JetDirect el número de puerto por lo general es 9100, en otros "
-"servidores puede variar. Consulte el manual de su hardware."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Nombre de host de la impresora"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "¡No se encuentra el nombre de la máquina de la impresora!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI del dispositivo de impresión"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Puede especificar directamente el URI para acceder a la impresora. El URI "
-"debe cumplir con las especificaciones Foomatic o CUPS. Recuerde que no todos "
-"los sistemas de impresión admiten URIs."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "¡Debe introducir un URI válido!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Cada impresora necesita un nombre (por ejemplo, \"impresora\"). No tiene por "
-"qué rellenar los campos Descripción ni Ubicación. Son comentarios para los "
-"usuarios."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nombre de la impresora"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Descripción"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Ubicación"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Preparando base de datos de impresoras ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "El modelo de su impresora"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake ha comparado el modelo que resultó de la detección automática "
-"con los modelos listados en su base de datos de impresoras para encontrar la "
-"mejor coincidencia. Esta elección puede estar equivocada, especialmente si "
-"su impresora no está listada en absoluto en la base de datos. Entonces, "
-"verifique si la elección es correcta y haga clic en \"El modelo es correcto"
-"\" , caso contrario, haga clic en \"Seleccionar el modelo manualmente\" de "
-"forma tal que pueda elegir el modelo de su impresora manualmente en la "
-"pantalla siguiente.\n"
-"\n"
-"Para su impresora Printerdrake ha encontrado:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "El modelo es correcto"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Seleccionar el modelo manualmente"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Selección del modelo de impresora"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "¿Qué modelo de impresora tiene?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Por favor, verifique que Printerdrake hizo correctamente la detección "
-"automática del modelo de su impresora. Busque el modelo correcto en la lista "
-"si el cursor está sobre un modelo equivocado o si está en \"Impresora en "
-"crudo\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Si no se lista su impresora, elija una compatible (vea el manual de la "
-"misma) o una simliar."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Configuración de impresora de windows OKI"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Va a configurar una impresora laser de windows OKI. Estas impresoras\n"
-"utilizan un protocolo de comunicación muy especial y sólo funcionan cuando "
-"se conectan al primer puerto paralelo. Cuando su impresora está conectada a "
-"otro puerto o a un servidor de impresión, por favor conéctela al primer "
-"puerto paralelo antes de imprimir una página de prueba. De no ser así, la "
-"impresora no funcionará. El controlador ignorará la configuración del tipo "
-"de conexión."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Configuración de impresora de inyección de tinta Lexmark"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Los controladores de impresión de inkjet que proporciona Lexmark sólo "
-"admiten impresoras locales, no impresoras en máquinas remotas o servidores "
-"de impresión. Por favor, conecte su impresora a un puerto local o "
-"configúrelo en la máquina a la que está conectada."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Para permitir imprimir con su impresora de inyección de tinta Lexmark y esta "
-"configuración, necesita los controladores de impresoras de inyección de "
-"tinta proporcionados por Lexmark (http://www.lexmark.com/). Vaya al sitio de "
-"EEUU y haga clic en el botón \"Drivers\". Luego, seleccione su modelo y "
-"posteriormente \"Linux\" como sistema operativo. Los controladores vienen "
-"vienen como paquetes RPM o como scripts de la shell con instalación gráfica "
-"interactiva. No necesita hacer esta configuración con los interfaces "
-"gráficos. Cancele directamente tras el acuerdo de licencia. Luego imprima "
-"páginas alineadas con la cabeza de impresión \"lexmarkmaintain\" y ajuste la "
-"configuración de la alineación de la cabeza con este programa."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Configuraciones predeterminadas de la impresora\n"
-"\n"
-"Debería asegurarse que el tamaño de página y el tipo de tinta/modo de "
-"impresión (si corresponde) y también la configuración de hardware de las "
-"impresoras láser (memoria, unidad de dúplex, bandejas adicionales) están "
-"configurados correctamente. Note que una calidad de impresión o resolución "
-"extremadamente alta puede ser bastante lenta."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "¡La opción %s debe ser un número entero!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "¡La opción %s debe ser un número!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "¡La opción %s está fuera de rango"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"¿Quiere configurar esta impresora (\"%s\")\n"
-"como la impresora predeterminada?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Páginas de prueba"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Por favor, seleccione las páginas de prueba que quiere imprimir.\n"
-"Nota: la página de prueba de foto puede tardar mucho tiempo en ser impresa e "
-"incluso en impresoras láser con muy poca memoria puede que no salga. En la "
-"mayoría de los casos, basta con imprimir la página de prueba estándar."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "No hay páginas de prueba"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Imprimir"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Página de prueba estándar"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Página de prueba alternativa (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Página de prueba alternativa (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Página de prueba de foto"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "No imprimir ninguna página de prueba"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Imprimir la(s) página(s) de prueba..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"La(s) página(s) de prueba se enviaron a la impresora.\n"
-"Puede que pase algo de tiempo antes de que comience la impresión.\n"
-"Estado de la impresión:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"La(s) página(s) de prueba se enviaron al demonio de impresión.\n"
-"Puede que pase algo de tiempo antes de que comience la impresión.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "¿Funcionó adecuadamente?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Impresora en crudo"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Para imprimir un archivo desde la línea de comando (ventana de terminal) "
-"utilice el comando \"%s <archivo>\" o una herramienta de impresión gráfica: "
-"\"xpp <archivo>\" o \"kprinter <archivo>\". Las herramientas gráficas le "
-"permiten seleccionar la impresora y modificar las opciones de configuración "
-"fácilmente.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Estos comando también se utilizan en el campo \"Comando de impresión\" de "
-"los diálogos de impresión de muchas aplicaciones, pero aquí no se indica el "
-"nombre del archivo porque el archivo a imprimir lo proporciona la "
-"aplicación.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"El comando \"%s\" también permite modificar las opciones de configuración "
-"para un trabajo de impresión determinado. Simplemente, añada las "
-"configuraciones deseadas a la línea de comando, por ejemplo \"%s <archivo>"
-"\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Para obtener una lista con las opciones disponibles para la impresora actual "
-"lea la lista que se muestra debajo o haga clic en el botón \"Imprimir lista "
-"de opciones\".%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Aquí tiene una lista de las opciones disponibles para la impresora actual:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Para imprimir un archivo desde la línea de comando (ventana de terminal) use "
-"el comando \"%s <archivo>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Este comando también se utiliza en el campo \"Comando de impresión\" de los "
-"diálogos de impresión de muchas aplicaciones. Pero aquí no se da el nombre "
-"del archivo porque el nombre del archivo a imprimir lo proporciona la "
-"aplicación.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Para obtener una lista de las opciones disponibles para la impresora actual, "
-"haga clic en el botón \"Imprimir lista de opciones\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Para imprimir un archivo desde la línea de comando (ventana de terminal) use "
-"el comando \"%s <archivo>\" o \"%s <archivo>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"También puede utilizar el interfaz gráfico \"xpdq\" para configurar las "
-"opciones y manipular los trabajos de impresión.\n"
-"Si está usando KDE como entorno de escritorio tiene un \"botón de pánico\", "
-"un icono en su escritorio etiquetado como \"¡DETENER impresora!\", que "
-"detiene todos los trabajos de impresión inmediatamente cuando hace clic en "
-"él. Esto es útil, por ejemplo, para atascos de papel.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-" Los comandos \"%s\" y \"%s\" también permiten modificar las opciones de "
-"configuración para un trabajo de impresión particular. Simplemente añada las "
-"opciones deseadas a la línea de comando, por ejemplo \"%s <archivo>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Cerrar"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Imprimiendo/Escaneando en \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Imprimiendo en la impresora \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Imprimir lista de opciones"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Su dispositivo multifunción de HP se configuró automáticamente para ser "
-"capaz de escanear. Ahora puede escanear con \"scanimage\" (\"scanimage -d hp:"
-"%s\" para especificar el escáner si tiene más de uno) desde la línea de "
-"comandos o con los interfaces gráficos \"xscanimage\" o \"xsane\". Si está "
-"usando el GIMP, también puede escanear seleccionado el punto apropiado del "
-"menú \"Archivo\"/\"Adquirir\". Lance también \"man scanimage\" y \"man sane-"
-"hp\" en la línea de comandos para obtener más información.\n"
-"\n"
-"No use \"scannerdrake\" para este dispositivo."
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Su dispositivo multifunción HP se configuró automáticamente para ser capaz "
-"de escanear. Ahora puede escanear desde la línea comandos con \"ptal-hp %s "
-"scan ...\". No se soporta aún el escaneo por medio de un interfaz gráfico e "
-"desde el GIMP para su dispositivo. Encontrará más información en el archivo "
-"de su sistema \"/usr/share/doc/hpoj-0.8/ptal-hp-scan.html\". Si tiene una HP "
-"LaserJet 1100 o 1200 puede escanear cuando tenga la opción del escáner "
-"instalada.\n"
-"No use \"scannerdrake\" para este dispositivo."
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Leyendo los datos de la impresora ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Transferir configuración de la impresora"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Puede copiar la configuración de la impresora que ha realizado para la cola %"
-"s a %s, su cola corriente. Todos los datos de configuración (nombre de la "
-"impresora, descripción, ubicación, tipo de conexión, y opciones "
-"predeterminadas) se transfieren, pero los trabajos de impresión no se "
-"transfieren.\n"
-"Debido a las siguientes razones no todas las colas se pueden transferir:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS no soporta impresoras en servidores Novell o impresoras que envían los "
-"datos en un comando formado libremente.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ sólo soporta impresoras locales, impresoras LPD remotas, e impresoras "
-"Socket/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD y LPRng no soportan impresoras IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Además, las colas no creadas con este programa o con \"foomatic-configure\" "
-"no se pueden transferir."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Tampoco se pueden transferir las impresoras configuradas con los archivos "
-"PPD provistos por sus fabricantes o con controladores CUPS nativos."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Marque las impresoras que desea transferir y haga clic \n"
-"sobre \"Transferir\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "No transferir impresoras"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Transferir"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Ya existe una impresora denominada \"%s\" bajo %s. \n"
-"Haga clic sobre \"Transferir\" para sobre-escribirla.\n"
-"También puede ingresar un nombre nuevo o saltear esta impresora."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"El nombre de la impresora sólo debería contener letras, números y el guión "
-"bajo"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"La impresora \"%s\" ya existe,\n"
-"¿realmente desea sobre-escribir la configuración de la misma?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nuevo nombre de la impresora"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Transfiriendo %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Ha transferido su impresora por defecto anterior (\"%s\"), ¿Debería ser "
-"también la impresora por defecto bajo el nuevo sistema de impresión %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Refrescando datos de impresora ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Configuración de una impresora remota"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Iniciando la red ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Configurar la red ahora"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Funcionalidad de red no configurada"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Va a configurar una impresora remota. Para esto, se necesita un acceso a la "
-"red funcionando, pero aún no ha configurado su red. Si sigue sin "
-"configuración de red, no podrá utilizar la impresoara que está configurando "
-"ahora. ¿Cómo desea proceder?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Continuar sin configurar la red"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"La configuración de la red hecha durante la instalación no se puede iniciar "
-"ahora. Por favor, verifique si la red se hace accesible tras reiniciar su "
-"sistema y corrija la configuración usando el Centro de control de Mandrake, "
-"sección \"Redes e Internet\"/\"Conexión\", y tras esto configure la "
-"impresora, también utilizando el Centro de Control de Mandrake, sección "
-"\"Hardware\"/\"Impresora\"."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"El acceso a la red no estaba corriendo y no se puede iniciar. Por favor, "
-"verifique su configuración y su hardware. Luego, intente configurar su "
-"impresora remota de nuevo."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Reiniciando el sistema de impresión ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "Alta"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "Paranoica"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instalando un sistema de impresión en el nivel de seguridad %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Va a instalar el sistema de impresión %s sobre un sistema corriendo en el "
-"nivel de seguridad %s.\n"
-"\n"
-"Este sistema de impresión ejecuta un demonio (proceso en segundo plano) que "
-"espera trabajos de impresión y los gestiona. Las máquinas remotas pueden "
-"acceder también a este demonio a través de la red, así que es un potencial "
-"punto de ataque. Por eso, sólo unos pocos demonios seleccionados se inician "
-"por defecto en este nivel de seguridad.\n"
-"\n"
-"¿Seguro que desea configurar la impresión para esta máquina?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Iniciar el sistema de impresión al arrancar"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"El sistema de impresión (%s) no se iniciará automáticamente cuando arranque "
-"la máquina.\n"
-"\n"
-"Es posible que el inicio automático se desactivó al cambiar a un nivel de "
-"seguridad mayor, porque el sistema de impresión es un potencial punto de "
-"ataques.\n"
-"\n"
-"¿Desea volver a activar el inicio automático de la impresión cuando el "
-"sistema se vuelva a encender?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Verificando software instalado..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Quitando LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Quitando LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Seleccione sistema de impresión (spooler)"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "¿Qué sistema de impresión (spooler) desea usar?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configuración la impresora \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Instalando Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opciones de impresión"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Preparando PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Configurando las aplicaciones..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "¿Desea configurar la impresión?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Sistema de impresión: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Están configuradas las impresoras siguientes. Haga doble clic sobre una para "
-"cambiar sus parámetros; para hacerla la predeterminada; para ver información "
-"acerca de la misma o para hacer que una impresora en un servidor CUPS remoto "
-"esté disponible para Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Están configuradas las impresoras siguientes. Haga doble clic sobre una de "
-"ellas para modificarla, para configurarla como predeterminada, o para "
-"obtener información sobre la misma."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Refrescar la lista de impresoras (para visualizar todas las impresoras CUPS "
-"remotas)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Cambiar el sistema de impresión"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modo normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "¿Desea configurar otra impresora?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Modificar configuración de la impresora"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Impresora %s\n"
-"¿Qué desea modificar de esta impresora?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "¡Hacerlo!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tipo de conexión de la impresora"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Nombre de la impresora, descripción, ubicación"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Fabricante de la impresora, modelo, controlador"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Fabricante de la impresora, modelo"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Poner esta impresora como predeterminada"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Agregar esta impresora a Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Quitar esta impresora de Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Imprimir la(s) página(s) de prueba"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Se sabe cómo usar esta impresora"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Borrar impresora"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Borrando la impresora antigua \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Impresora predeterminada"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "La impresora \"%s\" ahora es la impresora predeterminada."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Agregando impresora a Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"La impresora \"%s\" se agregó satisfactoriamente a Star Office/OpenOffice."
-"org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "No se pudo agregar la impresora \"%s\" a Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Quitando la impresora de Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"La impresora \"%s\" se quitó satisfactoriamnete de Star Office/OpenOffice."
-"org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "No se pudo quitar la impresora \"%s\" de Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "¿Seguro que quiere borrar la impresora \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Borrando la impresora \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configuración del proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Bienvenido a la herramienta de configuración del proxy.\n"
-"\n"
-"Aquí podrá configurar sus proxies http y ftp con o sin\n"
-"usuario y contraseña.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Por favor, rellene las informaciones del proxy http.\n"
-"Déjelo en blanco si no quiere un proxy http."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "puerto"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "La Url debería empezar por 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "La parte del puerto debería ser numérica"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Por favor, rellene las informaciones del proxy ftp.\n"
-"Déjelo en blanco si no quiere un proxy ftp."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "La Url debería empezar por 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Por favor, introduzca usuario y contraseña del proxy, si es necesario.\n"
-"Déjelo en blanco si no desea usuario/contraseña."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "usuario"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "contraseña"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "contraseña (otra vez)"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Las contraseñas no coinciden. ¡Inténtelo de nuevo!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "No se puede añadir una partición al RAID md%d _ya formateado_"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "No se puede escribir el archivo %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "Falló mkraid"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "Falló mkraid (¿quizás no estén las herramientas de raid (raidtools)?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "No hay suficientes particiones para un RAID de nivel %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-"Lanzar el sistema de sonido ALSA (Arquitectura avanzada de sonido de Linux)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un planificador de comandos periódicos."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd se usa para monitorizar el estado de las baterías y enviar esa\n"
-"información a syslogd. También puede usarse para apagar el equipo cuando\n"
-"la batería está casi descargada."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ejecuta los comandos programados por el comando at en el momento\n"
-"especificado al lanzar at, y ejecuta comandos por lotes (batch) cuando\n"
-"la carga promedio del sistema es suficientemente baja."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron es un programa UNIX estándar que ejecuta programas especificados por\n"
-"el usuario periódicamente. El cron de Vixie añade varias funcionalidades al "
-"cron de Unix \n"
-"básico, incluyendo una mayor seguridad y opciones de configuración más "
-"potentes."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM añade soporte del ratón para los programas Linux en modo texto, como\n"
-"el Midnight Commander. También permite operaciones de cortar-y-pegar con\n"
-"el ratón en la consola, e incluye soporte para menúes emergentes en la "
-"consola."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake lanza una prueba del hardware, y opcionalmente configura\n"
-"el hardware nuevo/cambiado."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache es un servidor de páginas web. Se usa para servir archivos HTML y "
-"programas CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"El demonio para el superservidor de internet (normalmente llamado inetd) "
-"inicia\n"
-"una variedad de servicios adicionales de internet según sea necesario.\n"
-"Es el responsable de iniciar varios servicios, incluyendo telnet, ftp, rsh\n"
-"y rlogin. Al desactivar inetd, se desactivan todos los servicios que "
-"dependen de él."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Lanza el filtrado de paquetes para los núcleos de Linux de la serie 2.2,\n"
-"para configurar un cortafuegos que protege a su máquina de los ataques de la "
-"red."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Este paquete carga la definición de teclado que se indica en\n"
-"/etc/sysconfig/keyboard.  Puede ser configurado con el programa kbdconfig.\n"
-"Debe dejarse activo en la mayoría de las máquinas."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Regeneración automática de la cabecera del núcleo en /boot para\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Detección y configuración automática del hardware al arrancar."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf a veces realizará varias tareas al arrancar para\n"
-"mantener la configuración del sistema."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd es el demonio de impresión, necesario para que lpr funcione\n"
-"correctamente. Básicamente, es un servidor que coloca las tareas de\n"
-"impresión en las colas de impresión adecuadas para cada impresora."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"El servidor virtual de Linux (LVS) se usa para construir servidores de alto\n"
-"rendimiento y alta disponibilidad."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) es un servidor de nombres de dominio (DNS) usado para convertir "
-"los nombres de máquinas en direcciones IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta y desmonta todos los puntos de montaje de sistemas de archivos\n"
-"compartidos por medio de la red; como NFS (Network File System),\n"
-"SMB (Lan Manager/Windows) y NCP (Netware)"
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/desactiva todas las interfaces de red configuradas para iniciarse\n"
-"en el arranque del sistema."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
-"Este servicio proporciona la funcionalidad de servidor NFS, que se "
-"configura\n"
-"a través del archivo /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
-"Este servicio proporciona la funcionalidad de bloqueo de archivos por NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Activar el bloqueo numérico automáticamente bajo la consola y\n"
-"XFree al arrancar."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Admitir las win-impresoras OKI 4w y compatibles."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"El soporte PCMCIA se usa por lo general para admitir cosas como tarjetas\n"
-"de red o módems en ordenadores portátiles.  No se iniciará salvo que\n"
-"esté configurado, por lo que no es un problema tenerlo instalado\n"
-"en máquinas que no lo necesiten."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"El portmapper gestiona las conexiones RPC; que usan protocolos como\n"
-"NFS y NIS. El servidor portmap se debe estar ejecutando en los sistemas que "
-"actúan\n"
-"como servidores para protocolos que usan el mecanismo RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix es un agente de transporte de correo (MTA), es decir el programa "
-"encargado de enviar el correo electrónico de una máquina a otra."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Guarda y recupera el mecanismo de entropía del sistema; usado para la\n"
-"generación de números aleatorios de gran calidad."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Asignar dispositivos 'crudos' a dispositivos de bloque (como las "
-"particiones\n"
-"de los discos), para usar aplicaciones como Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"El demonio routed permite actualizar automáticamente las tablas de "
-"enrutamiento IP\n"
-"gracias al protocolo RIP. Mientras que RIP se usa bastante en redes "
-"pequeñas,\n"
-"para redes más complejas, se necesitan protocolos de enrutamiento más "
-"complejos."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"El protocolo rstat permite a los usuarios de una red recoger\n"
-"información sobre el rendimiento de cualquier máquina de dicha red."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"El protocolo rusers permite que los usuarios de una red identifiquen\n"
-"quien está conectado en otras máquinas que respondan."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"El protocolo rwho permite que los usuarios remotos obtengan una lista\n"
-"de todos los usuarios conectados a una máquina que ejecuta el demonio rwho\n"
-"(similar al finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Lanza el sistema de sonido en su máquina"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog es el servicio a través del que varios demonios van a enviar\n"
-"sus mensajes de registro, que syslog va a redirigir a varios archivos\n"
-"de registro(log).  Es una buena idea ejecutar siempre syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Carga los controladores para sus dispositivos USB."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Inicia el servidor de tipografías X11 (obligatorio para correr XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Seleccione qué servicios se deben iniciar automáticamente al arrancar"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Imprimiendo"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Compartir archivos"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistema"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Administración remota"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Servidor de base de datos"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servicios: %d activados de %d registrados"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servicios"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "corriendo"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "parado"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servicios y demonios"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"No hay información adicional para\n"
-"este servicio. Disculpe."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Al iniciar"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Iniciar"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Parar"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Gracias por elegir Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Bienvenido al mundo del Código Abierto (Open Source)"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"El éxito de MandrakeSoft se basa en el principio del Software Libre. Su "
-"sistema operativo es el resultado del trabajo colaborativo de parte de la "
-"Comunidad Linux mundial"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Únase al mundo del Software Libre"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Conozca a la comunidad Open Source y sea un miembro. Aprenda, enseñe, y "
-"ayude a otros uniéndose a los foros de discusión que encontrará en nuestras "
-"páginas web para la \"Comunidad\""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet y Mensajería"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 le brinda la mejor selección de software para acceder a "
-"todo lo que tiene para ofrecer la Internet: Navegue la web y vea animaciones "
-"con Mozilla y Konqueror, intercambie correo-e y organice su información "
-"personal con Evolution y KMail, y mucho más"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedios y Gráficos"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"¡Mandrake Linux 8.2 le permitirá llevar a su computadora multimedios al "
-"límite! Use el último software para reproducir música y archivos de audio, "
-"edite y organice sus imágenes y fotos, mire TV y reproduzca vídeos, y mucho "
-"más"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Desarrollo"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 es la plataforma de desarrollo definitiva. Descubra el "
-"poder del compilador GNU gcc así como también los mejores entornos de "
-"desarrollo de Código Abierto"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Centro de control de Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"El Centro de Control de Mandrake Linux 8.2 es un lugar único para "
-"personalizar y configurar su sistema Mandrake por completo"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Interfaces de usuario"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 brinda 11 entornos de escritorio gráficos y "
-"administradores de ventanas distintos para elegir, incluyendo a GNOME 1.4, "
-"KDE 2.2.2, Window Maker 0.8, y otros"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Software de servidor"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Transforme su máquina en un servidor potente con unos pocos clic del ratón: "
-"servidor web, de correo, cortafuegos, router, servidor de archivos e "
-"impresoras, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Juegos"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 brinda lo mejor en juegos de Código Abierto - arcade, "
-"acción, naipes, deportes, estrategia, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"¿Desea aprender Linux de manera simple, rápida, y gratis? MandrakeSoft le "
-"proporciona entrenamiento libre en Linux, así como también una manera de "
-"probar su progreso, en MandrakeCampus -- nuestro centro de entrenamiento en "
-"línea"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"El soporte de calidad de la Comunidad Linux, y de MandrakeSoft, está "
-"simplemente a la vuelta de la esquina. y si ya es un veterano de Linux, "
-"conviértase en \"Experto\" y comparta su conocimiento en nuestro sitio web "
-"de soporte"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Nuestros consultores están listos para analizar sus necesidades y ofrecerle "
-"una solución persoanlizada para todos sus proyectos de IT. Aproveche la "
-"vasta experiencia de MandrakeSoft como productor de Linux para brindar una "
-"alternativa IT verdadera para su organización de negocios"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"En nuestra tienda electrónica en línea están disponibles el rango completo "
-"de soluciones Linux, así como también ofertas especiales sobre los productos "
-"y otras \"cositas\""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Para más información sobre los Servicios Profesionales de MandrakeSoft y las "
-"ofertas comerciales, por favor vea la página web siguiente:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instalando paquetes..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"No se puede leer su tabla de particiones, está demasiado deteriorada :-(\n"
-"Se intentará ir poniendo en blanco las particiones malas"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "¡Error!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "No se encuentra el archivo de imagen `%s' necesario."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Configurador de Instalación Automática"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Está a punto de configurar el un disquete de Instalación Automática. Esta "
-"característica es algo peligrosa y debe ser utilizada con cuidado.\n"
-"\n"
-"Con esa característica, podrá repetir la instalación que ha realizado en "
-"esta computadora, y se le consultará interactivamente en algunos pasos, para "
-"poder cambiar los valores de los mismos.\n"
-"\n"
-"Para máxima seguridad, el particionado y formateado nunca será realizado "
-"automáticamente, sin importar lo que eligió durante la instalación de esta "
-"computadora.\n"
-"\n"
-"¿Desea continuar?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Configuración de pasos automáticos"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Por favor, elija para cada paso si desea que se repita como su instalación, "
-"o el mismo será manual"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Bienvenido.\n"
-"\n"
-"Los parámetros de la instalación automáticas están disponibles en las "
-"secciones de la izquierda"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "¡Felicidades!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"El disquete ha sido generado satisfactoriamente.\n"
-"Ahora puede repetir su instalación."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Instalación automática"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Añadir un elemento"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Borrar el último elemento"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                  Reporte de DrakBackup \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"               Reporte del servidor DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"           Detalles del reporte de DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "progreso total"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Respaldar archivos del sistema..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Respaldar archivos del disco rígido..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Respaldar archivos de usuario..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Progreso de respaldo del disco rígido..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Respaldar otros archivos..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"Lista de archivos envíada por FTP: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Problema en la conexión FTP. No fue posible enviar sus archivos de copia "
-"de seguridad por FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Error durante el envío de correo. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Selección de archivos."
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Seleccione los archivos o directorios y haga clic sobre 'Agregar'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Por favor, verifique todas las opciones que necesita.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Estas opciones pueden respaldar y restaurar todos los archivos en el "
-"directorio /etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Respaldar archivos del sistema. (directorio /etc)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Usar repaldo incremental (no reemplazar respaldos antiguos)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "No incluir archivos críticos (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Con esta opción podrá restaurar cualquier versión de su\n"
-"directorio /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Por favor, marque a todos los usuarios que desa incluir en la copia de "
-"respaldo"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "No incluir el cache del navegador"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Usar respaldos incrementales (no reemplazar respaldos antiguos)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Quitar los seleccionados."
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Usuarios"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Usar conexión FTP para realizar copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Por favor, ingrese el nombre o la IP del host"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Por favor, ingrese el directorio en este host para\n"
-" guardar la copia de respaldo."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Por favor, ingrese su nombre de usuario (login)"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Por favor, ingrese su contraseña"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Recordar esta contraseña"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "Conexión FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Conexión segura"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Usar CD/DVDROM para la copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Por favor, elija el espacio de su CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Por favor, verifique que está utilizando un soporte CDRW"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Por favor, verifique si desea borrar su CDRW primero"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Por favor verifique si desea hacer que su\n"
-" CD arranque."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Por favor, ingrese el nombre del dispositivo de\n"
-" su grabadora de CD, ej: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Usar cinta para realizar respaldo"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-"Por favor, ingrese el nombre del dispositivo a utilizar para el respaldo"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Por favor, ingrese el tamaño máximo\n"
-" permitido para Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Por favor, ingrese el directorio a guardar:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Usar cuota para archivos de respaldo"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Red"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Disco rígido / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "Cada hora."
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "Cada día."
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "Cada semana."
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "Cada mes."
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Usar servidor"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Por favor, elija el intervalo de\n"
-" tiempo entre cada copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Por favor, elija el soporte\n"
-"para la copia de respaldo."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Usar el disco rígido con servidor"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Usar FTP con servidor"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"Por favor, asegúrese que el servidor cron está incluído entre sus servicios."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Enviar reporte por correo-e luego de cada respaldo a :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Qué"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Dónde"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Cuándo"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Más opciones"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Configuración de Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Por favor, elija dónde desea realizar la copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "en disco rígido"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "a través de la red"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Por favor, elija qué desea respaldar"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Respaldar el sistema"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Respaldar usuarios"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Seleccionar manualmente el usuario"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Fuentes de respaldo: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Archivos del sistema:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Archivos de usuario:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Otros archivos:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Guardar en el disco en la ruta : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Guardar por FTP en el host : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t nombre de usuario: %s\n"
-"\t\t en ruta: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Opciones:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tNo incluir archivos del sistema\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tRespaldar usando tar y bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tRespaldar usando tar y gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Servidor (%s) incluye :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disco rígido.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Red por FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Red por SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"Sin configuración, por favor haga clic sobre el Asistente o Avanzado.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lista de datos a restaurar:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lista de datos corruptos:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Por favor, desmarque o quítelo la próxima vez."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Los archivos de respaldo están corruptos"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Todos los datos seleccionados han sido        "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "       Recuperados satisfactoriamente en %s"
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "    Configuración de la restauración"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Se pueden restaurar los otros archivos."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Lista de usuarios a restaurar (sólo importa la fecha más reciente por "
-"usuario)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Respaldar los archivos del sistema anteriores a:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Por favor, elija la fecha para restaurar"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Usar el disco rígido para copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Restaurar desde el disco rígido."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-"Por favor, ingrese el directorio donde se almacenan las copias de respaldo"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Elija otro soporte desde el cual restaurar"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Otros soportes"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Restaurar archivos del sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Restaurar usuarios"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Restaurar otros"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "seleccione la ruta para restaurar (en vez de /)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Realizar respaldo nuevo antes de restaurar (sólo para respaldos "
-"incrementales)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Borrar directorios de los usuarios antes de restaurar."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Restaurar todas las copias de respaldo"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Restauración personalizada"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Ayuda"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Anterior"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Guardar"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Realizar copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Restaurar"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Siguiente"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Por favor, realize la copia de respaldo antes de restaurarla...\n"
-" o verifique que la ruta para almacenar es correcta."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Error enviando correo con sendmail\n"
-"  su correo-e de reporte no se envió\n"
-"  Por favor, configure a sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lista de paquetes a instalar"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Error enviando el archivo por FTP.\n"
-" Por favor, corrija su configuración de FTP."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Por favor, seleccione los datos a restaurar..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Por favor, seleccione el soporte para la copia de respaldo..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Por favor, elija los datos a respaldar..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"No se econtró el archivo de configuración,\n"
-" por favor haga clic sobre Asistente o Avanzado."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "En desarrollo ... por favor, espere."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Respaldar archivos del sistema"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Respaldar archivos de usuarios"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Respaldar otros archivos"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Progreso total"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "Envío de archivos por FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Enviando archivos..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Lista de datos a incluir en el CDROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Por favor, ingrese la velocidad de la grabadora de CDs"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-"Por favor, ingrese el nombre del dispositivo de su grabadora de CDs (ej: "
-"0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Por favor, verifique si desea hacer que su CD arranque."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Respaldar Ahora desde archivo de configuración"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Ver configuración del respaldo"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Configuración del Asistente"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Configuración avanzada"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Respaldar Ahora"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"descripción de las opciones:\n"
-"\n"
-" En este paso Drakbackup le permite cambiar:\n"
-"\n"
-" - El modo de compresión:\n"
-"    \n"
-"      Si marca compresión bzip2, comprimirá mejor sus datos\n"
-"      que gzip (alrededor del 2-10 %).\n"
-"      Por defecto, esta opción no está marcada dado que este\n"
-"      modo de compresión necesita más tiempo (100 veces más)\n"
-" \n"
-" - El modo de actualización:\n"
-"\n"
-"      Esta opción actualizará su respaldo, pero no es\n"
-"      realmente útil ya que necesita descomprimirlo\n"
-"      antes que pueda actualizarlo.\n"
-"      \n"
-" - el modo .backupignore:\n"
-"\n"
-"      Al igual que cvs, Drakbackup ignorará todas las referencias\n"
-"      incluídas en los archivos .backupignore de cada directorio.\n"
-"      ej: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Algunos errores con sendmail son causados por\n"
-" una configuración mala de postfix. Para resolverlo tiene\n"
-" que configurar myhostname o mydomain en /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"descripción de las opciones:\n"
-"\n"
-" - Respladar archivos del sistema:\n"
-"       \n"
-"\tEsta opción permite respaldar su directorio /etc, que\n"
-"\tcontiene todos los archivos de configuración. Por favor\n"
-"\ttenga cuidado durante la restauración de no sobre-escribir:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Respaldar archivos de usuario:\n"
-"\n"
-"\tEsta opción permite seleccionar todos los usuarios que\n"
-"\tdesea respaldar.\n"
-"\tPara preservar espacio, se recomienda no incluir el\n"
-"\tcache del navegador web.\n"
-"\n"
-" - Respaldar otros archivos:\n"
-"\n"
-"\tEsta opción permite añadir más datos a guardar.\n"
-"\tCon el otro respaldo no es posible, por ahora,\n"
-"\tseleccionar el respaldo incremental.\t\t\n"
-" \n"
-" - Respaldo incremental:\n"
-"\n"
-"\tEl respaldo incremental es la opción más potente.\n"
-"\tLe permite respaldar todos sus datos la primera\n"
-"\tvez, y luego sólo aquellos que cambiaron.\n"
-"\tLuego, podrá, durante la etapa de restauración,n\trestaurar sus datos "
-"desde una fecha especificada.\n"
-"\t\n"
-"\tSi no ha seleccionado esta opción todos los\n"
-"\trespaldos antiguos se borran antes de volver a respaldar.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"descripción de la restauración:\n"
-" \n"
-"Sólo se utilizará la fecha más reciente, ya que con respaldos\n"
-"incrementales sólo es necesario restaurar de uno de los antiguos.\n"
-"\n"
-"Por lo tanto, si no desea restaurar un usuario, por favor desmarque\n"
-"su casilla.\n"
-"\n"
-"En caso contrario, sólo puede seleccionar alguno de éstos\n"
-"\n"
-" - Respaldos incrementales:\n"
-"\n"
-"\tEl respaldo incremental es la opción más potente.\n"
-"\tLe permite respaldar todos sus datos la primera\n"
-"\tvez, y luego sólo aquellos que cambiaron.\n"
-"\tLuego, podrá, durante la etapa de restauración,\n"
-"\trestaurar sus datos desde una fecha especificada.\n"
-"\tSi no ha seleccionado esta opción todos los\n"
-"\trespaldos antiguos se borran antes de volver a respaldar...\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft por DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft por DUPONT Sebastien <dupont_s\\@epita.fr>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-"                                            _____________________\n"
-"\n"
-"Descripción:\n"
-"\n"
-"  Drakbackup se usa para respaldar su sistema.\n"
-"  Durante la configuración puede seleccionar:\n"
-"\t- Archivos del sistema,\n"
-"\t- Archivos de usuarios,\n"
-"\t- Otros archivos.\n"
-"\to Todo su sistema ... y Otros (como Particiones Windows)\n"
-"\n"
-"  Drakbackup le permite respaldar su sistema sobre:\n"
-"\t- Disco rígido.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (con autoboot, rescue y autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Cinta.\n"
-"\n"
-"  Drakbackup le permite restaurar su sistema a un\n"
-"  directorio seleccionado por el usuario.\n"
-"\n"
-"  Predeterminadamente se almacenarán los respaldos en su\n"
-"  directorio /var/drakbackup.\n"
-"\n"
-"  Archivo de configuración:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Paso de restauración:\n"
-"  \n"
-"  Durante la restauración, DrakBackup quitará su \n"
-"  directorio original y verificará que todos \n"
-"  los archivos de respaldo no estén corruptos. Se \n"
-"  recomienda que haga un último respaldo antes de restaurar.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"descricpión de las opciones:\n"
-"\n"
-"Por favor, tenga cuidado cuando use respaldos por ftp, porque\n"
-"sólo los respaldos ya hechos se envían al servidor.\n"
-"Por el momento, necesita realizar el respaldo en su disco rígido\n"
-"antes de enviarlo al servidor.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problemas durante la restauración:\n"
-"\n"
-"Durante el paso de restauración, Drakbackup verificará todos los\n"
-"archivos de respaldo antes de restaurarlos.\n"
-"Antes de la restuaración, Drakbackup quitará el\n"
-"directorio original, y perderá todos los datos en el mismo.\n"
-"Es importante ser cuidadoso y no modificar los archivos de\n"
-"datos de respaldo a mano.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Descripción:\n"
-"\n"
-"  Drakbackup se usa para respaldar su sistema.\n"
-"  Durante la configuración puede seleccionar:\n"
-"\t- Archivos del sistema,\n"
-"\t- Archivos de usuarios,\n"
-"\t- Otros archivos.\n"
-"\to Todo su sistema ... y Otros (como Particiones Windows)\n"
-"\n"
-"  Drakbackup le permite respaldar su sistema sobre:\n"
-"\t- Disco rígido.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (con autoboot, rescue y autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Cinta.\n"
-"\n"
-"  Drakbackup le permite restaurar su sistema a un\n"
-"  directorio seleccionado por el usuario.\n"
-"\n"
-"  Por defecto, se almacenarán los respaldos en su\n"
-"  directorio /var/lib/drakbackup.\n"
-"\n"
-"  Archivo de configuración:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Paso de restauración:\n"
-"  \n"
-"  Durante la restauración, DrakBackup quitará su \n"
-"  directorio original y verificará que todos \n"
-"  los archivos de respaldo no estén corruptos. Se \n"
-"  recomienda que haga un último respaldo antes de restaurar.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Falló la instalación de %s. Ocurrió el siguiente error:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Buscar tipografías instaladas"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Desmarcar las tipografías instaladas"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "analizar todas las tipografías"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "no se encontraron tipografías"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "hecho"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "no se pueden encontrar tipografías en las particiones montadas"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Volver a seleccionar tipografías correctas"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "no se pueden encontrar tipografías.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Buscar tipografías en la lista de instaladas"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Copiar tipografías"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Instalación de tipografías True Type"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "por favor, espere mientras corre ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Instalación de True Type realizada"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Conversión de tipografías"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "Construyendo Type1"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Referenciando a Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "Conversión de tipografías TTF"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "Conversión de tipografías PFM"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Suprimir archivos temporales"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Reiniciar XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Suprimir archivos de tipografías"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "Reiniciar XFS"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Antes de instalar cualquier tipografía, asegúrese que tiene derecho de "
-"usarlas\n"
-"e instalarlas en su sistema.\n"
-"\n"
-"-Puede instalar las tipografías usando la manera normal. En casos raros,\n"
-"puede ser que tipografías \"falsas\" congelen a su servidor X."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Importación de tipografías"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Obtener tipografías de Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Desinstalar tipografías"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Opciones avanzadas"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Lista de tipografías"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Elija las aplicaciones que soportarán las tipografías:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Impresoras genéricas"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Seleccione el archivo o directorio de tipografías y haga clic sobre 'Agregar'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Instalar lista"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "haga clic aquí si está seguro."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "aquí si no lo está."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Deseleccionar todas."
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Seleccionar todas."
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Quitar lista"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Pruebas iniciales"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Copiar tipografías en su sistema"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Instalar y convertir tipografías"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Post-instalación"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Quitar tipografías de su sistema"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Post-desinstalación"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Compartir la conexión a Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ahora, la conexión compartida a Internet está activada ahora"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ya se ha realizado la configuración de la conexión compartida a Internet.\n"
-"Ahora está activa.\n"
-"\n"
-"¿Qué desea hacer?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "desactivar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "rechazar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "reconfigurar"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Desactivando los servidores..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Ahora, la conexión compartida a Internet está inactiva."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ahora, la conexión compartida a Internet está desactivada"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ya se ha realizado la configuración de la conexión compartida a Internet.\n"
-"Ahora está inactiva.\n"
-"\n"
-"¿Qué desea hacer?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "activar"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Activando los servidores..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Ahora, la conexión compartida a Internet está activa."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Puede configurar su ordenador para compartir su conexión a Internet.\n"
-"Con esta característica, otras máquinas de su red local podrán usar la "
-"conexión a Internet de este ordenador.\n"
-"\n"
-"Aviso: necesita un adaptador de red dedicado para configurar una red de área "
-"local (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfaz %s (usando el módulo %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfaz %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "¡No hay ningún adaptador de red en su sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"No se ha detectado ningún adaptador de red en su sistema. Por favor, ejecute "
-"la herramienta de configuración del hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interfaz de red"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sólo hay un adaptador de red configurado en su sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Se va a configurar su red de área local con ese adaptador."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Por favor, elija qué adaptador de red estará conectado a su red de área "
-"local."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Interfaz de red ya configurada"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Atención, el adaptador de red (%s) ya está configurado.\n"
-"\n"
-"¿Desea volver a configurarlo automáticamente?\n"
-"\n"
-"Puede hacerlo manualmente pero necesita saber lo que está haciendo."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Volver a configurar automáticamente"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Mostrar la configuración corriente de la interfaz"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Configuración corriente de `%s':\n"
-"\n"
-"Red: %s\n"
-"Dirección IP: %s\n"
-"Atributo IP: %s\n"
-"Controlador: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Puedo mantener su configuración corriente y asumir que ya configuró un "
-"servidor DHCP; en ese caso, por favor verifique que leo correctamente la Red "
-"Clase C que usó para su red local; no la volveré a configurar y no tocaré la "
-"configuración de su servidor DHCP.\n"
-"\n"
-"Caso contrario, puedo volver a configurar su interfaz y (volver a)configurar "
-"un servidor DHCP por Ud.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Red Local Clase C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP de (este) servidor DHCP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Volver a configurar la interfaz y el servidor DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "La red local no finalizó con `.0', saliendo."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"¡Se encontró un conflicto potencial de direcciones LAN en la configuración "
-"de %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "¡Se detectó la configuración del cortafuegos!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"¡Atención! Se ha detectado la configuración del cortafuegos existente. Puede "
-"que necesite algún ajuste manual tras la instalación."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Configurando..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configurando los scripts, instalando el software, iniciando los servidores..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas al instalar el paquete %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Se ha configurado todo.\n"
-"Ahora puede compartir su conexión a Internet con otros ordenadores de su red "
-"de área local, usando la configuración automática de la red (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "La configuración ya se ha hecho, pero ahora está desactivada."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "La configuración ya se ha hecho, y ahora está activada."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "No se ha configurado la conexión compartida a Internet."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configuración de la conexión compartida a Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"¡Bienvenido a la herramienta para compartir la conexión a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Haga click sobre Configurar para lanzar el asistente de configuración."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuración de la red (%d adaptadores)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Borrar perfil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Perfil a borrar:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nuevo perfil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Nombre del perfil a crear (el perfil nuevo se crea como copia del actual):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nombre de la máquina: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Acceso a Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Pasarela:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfaz:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Estado:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Por favor, espere"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configurar el acceso a Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configuración de la red local"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Controlador"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfaz"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocolo"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Estado"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configurar la red de área local..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Haga clic aquí para lanzar el asistente ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Asistente..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Aplicar"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Espere, por favor... Aplicando la configuración"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Conectado"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "No conectado"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Desconectar..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Atención, se ha detectado otra conexión con la Internet, tal vez está usando "
-"su red"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"No tiene configurada ninguna interfaz.\n"
-"Configure la primera haciendo clic sobre 'Configurar'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configuración LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocolo de arranque"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Iniciado al arranque"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "cliente DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "activar ahora"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "desactivar ahora"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Todavía no se ha configurado esta interfaz.\n"
-"Lance el asistente de configuración en la ventana principal"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"No tiene ninguna conexión a Internet.\n"
-"Primero debe crear una haciendo clic sobre 'Configurar'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configuración de la conexión a Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configuración de la conexión a Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipo de conexión: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parámetros"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Pasarela"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Tarjeta ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Definiendo el nivel de seguridad"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro de control"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Elija la herramienta que desea usar"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canadá (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "EEUU (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "EEUU (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "EEUU (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "China (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japón (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japón (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Europa del este"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlanda"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Europa del oeste"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nueva Zelanda"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Sudáfrica"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Por favor,\n"
-"teclee su norma de tv y país"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Norma de TV:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Área:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Buscando canales de TV, en progreso ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Buscando canales de TV"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "¡No se detectó tarjeta de TV!"
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"No se detectó tarjeta de TV en su máquina. Por favor, verifique que tiene conectada correctamente una tarjeta de vídeo/TV soportada por Linux.\n"
-"\n"
-"\n"
-"Puede visitar nuestra base de datos de hardware en:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uso: keyboarddrake [--expert] [teclado]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Seleccione la distribución de su teclado."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "¿Desea que la tecla BackSpace envíe un Delete en la consola?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Cambie el CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Por favor, inserte el CD-ROM de la instalación en su unidad y presione "
-"Aceptar.\n"
-"Si no lo tiene, presione Cancelar para evitar la actualización en vivo."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "¡¡¡ No se puede iniciar la actualización en vivo !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Se ha realizado el cambio, pero no se hará efectivo hasta que salga"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Mostrar sólo para el día seleccionado"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Archivo/_Nuevo"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Archivo/_Abrir"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Archivo/_Guardar"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>G"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Archivo/Guardar _como"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Archivo/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opciones"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opciones/Prueba"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Ayuda"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Ayuda/_Acerca de..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Usuario"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Mensajes"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Explicaciones de las herramientas de Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "buscar"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Una herramienta para ver sus archivos de registro (logs)"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Configuración"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "coincidencia"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "pero no hay coincidencias"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Elija un archivo"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Calendario"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Contenido del archivo"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Alerta por correo/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "por favor, espere, analizando el archivo: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Configuración de alerta por correo/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Bienvenido a la herramienta de configuración del correo/SMS.\n"
-"\n"
-"Aquí podrá configurar su sistema de alerta.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "configuración de servicios"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Recibirá una alerta si se detiene la ejecución de uno de los servicios "
-"seleccionados"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "configuración de la carga"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Recibirá una alerta si la carga es mayor que este valor"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "configuración de alerta"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Configura la forma en que el sistema le alertará"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Guardar como..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Seleccione el tipo de su ratón, por favor."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "no se encontró ningún usb_serie\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "¿Emular el tercer botón?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "se encontró %s en %s, ¿configurarlo?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Seleccione un escáner."
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "El escáner %s no está soportado"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"Scannerdrake no pudo detectar su escáner %s.\n"
-"Por favor, seleccione el dispositivo donde está conectado su escáner"
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "elija el dispositivo"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"printerdrake puede configurar este escáner %s.\n"
-"Puede lanzar printerdrake desde el Centro de control de Mandrake en la "
-"sección Hardware."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Su escáner %s ha sido configurado.\n"
-"Ahora puede escanear documentos usando \"XSane\" en el menú Multimedios/Gráficos."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Configuración del cortafuegos"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Configuración del cortafuegos"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Cortafuegos\n"
-"\n"
-"Ya tiene configurado un cortafuegos.\n"
-"Haga clic sobre Configurar para cambiar o quitar el cortafuegos"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Cortafuegos\n"
-"\n"
-"Haga clic sobre Configurar para configurar un cortafuegos estándar"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Elija su idioma"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Tipo de instalación"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detección del disco rígido"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configuración del ratón"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Elija su teclado"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Seguridad"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Sistemas de archivos"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formateo de particiones"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Elija los paquetes a instalar"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalar el sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Añadir un usuario"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configurar la red"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Servicios al inicio"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Cargador de arranque"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Crear un disco de arranque"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configuración de X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Actualiz. del sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Salir de la instalación"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"configurador de tinyfirewall\n"
-"\n"
-"Esto configura un cortafuegos personal para esta máquina Mandrake Linux.\n"
-"Para una solución potente de cortafuegos dedicada, por favor eche un "
-"vistazo\n"
-"a la distribución especializada MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Ahora le preguntaremos a qué servicios quiere permitir conectarse desde\n"
-"Internet. Por favor, piense cuidadosamente las respuestas, ya que la\n"
-"seguridad de su ordenador es importante.\n"
-"Por favor, si en este momento no está usando alguno de estos servicios,\n"
-"protéjalos. ¡Puede cambiar esta configuración cuando quiera\n"
-"volviendo a ejecutar esta aplicación!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"¿Está corriendo un servidor web en esta máquina que quiere que vea toda\n"
-"Internet? Si está corriendo un servidor web al que sólo necesita acceder\n"
-"desde esta máquina, aquí puede responder con seguridad NO.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"¿Está corriendo un servidor de nombres en esta máquina? Si no configuró uno\n"
-"para entregar información de IP y de la zona a toda Internet, por favor\n"
-"responda no.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"¿Desea permitir conexiones de entrada de Secure Shell (ssh)? Este es un\n"
-"reemplazo de telnet que puede usar para la entrada al sistema. Si ahora está "
-"usando\n"
-"telnet, definitivamente debería cambiar a ssh. telnet no está cifrado, por\n"
-"lo tanto algunos atacantes pueden robarle su contraseña si lo usa. ssh está\n"
-"cifrado y no permite este tipo de ataque."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"¿Desea permitir conexiones entrantes por telnet?\n"
-"Esto es terriblemente inseguro, como explicamos en la pantalla anterior. Es\n"
-"altamente recomendable responder No aquí y usar ssh en lugar de\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"¿Está corriendo un servidor FTP que debe ser accesible desde Internet?\n"
-"En ese caso, es altamente recomendable que sólo lo use para transferencias\n"
-"anónimas. Algunos atacantes pueden robar cualquier contraseña enviada por "
-"FTP,\n"
-"ya que FTP tampoco usa cifrado para transferir las contraseñas.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"¿Está corriendo un servidor de correo? Si envía sus mensajes con pine, "
-"mutt \n"
-"o cualquier otro cliente de correo de modo texto, probablemente sí.\n"
-"En caso contrario, debería proteger esto con el cortafuegos.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"¿Está corriendo un servidor POP o IMAP? Estos deberían ser\n"
-"usados para almacenar cuentas de correo no basadas en web para las\n"
-"personas en esta máquina.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Parece que está ejecutando un núcleo 2.2. Si una computadora en su casa\n"
-"o en la oficina configura su dirección IP de red automáticamente\n"
-"(asignación dinámica), debemos permitir esto. ¿Es este el caso?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"¿El reloj de su computadora está sincronizado al reloj de otra computadora?\n"
-"Mayormente, esto es lo que usan las organizaciones con servidores Unix/"
-"Linux\n"
-"medianamente grandes para sincronizar los tiempos de conexión y cosas así.\n"
-"Si no es parte de una oficina grande y nunca escuchó nada acerca de esto,\n"
-"probablemente no sea su situación."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Configuración completa. ¿Se pueden escribir estos cambios al disco?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "No se puede abrir %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "No se puede abrir %s para escribir: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "No, no necesito DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Sí, necesito DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "No, no necesito NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Sí, necesito NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "No grabar"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Grabar y Salir"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Asistente para la configuración del Cortafuegos"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "No (proteger esto de la Internet detrás del cortafuegos)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Sí (permitir esto a través del cortafuegos)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Espere por favor... Verificando los paquetes instalados"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Fallo instalando los paquetes necesarios: %s y Bastille.\n"
-" Intente instalarlos a mano."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Servidor, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Computadora de Red (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servidor NFS, servidor SMB, servidor proxy, servidor SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oficina"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Estación de trabajo GNOME"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Herramientas para su Palm Pilot o su Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estación de trabajo"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Servidor, Cortafuegos/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Servidor de Información de Red y de Nombres de Dominio"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programas de Oficina: procesadores de palabras (kword, abiword), plantillas "
-"de cálculo (kspread, gnumeric), visualizadores PDF, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Herramientas de audio: reproductores mp3 o midi, mezcladores, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Libros y COMOs sobre Linux y Software Libre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Estación de trabajo KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedios - Vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conjunto de herramientas para correo, noticias, web, transferencia de "
-"archivos, y chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Servidor, Bases de Datos"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Servidor de base de datos PostgreSQL o MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Herramientas para facilitar la configuración de su computadora"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedios - Sonido"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitarios"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentación"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Herramientas para la consola"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Servidor de correo Postfix, servidor de noticias Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Estación Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Estación Multimedios"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuración"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Más escritorios gráficos (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"El K Desktop Environment, el entorno gráfico básico con una colección de "
-"herramientas que lo acompañan"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Entorno gráfico"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache y Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Herramientas para crear y grabar CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Estación de trabajo de Oficina"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programas gráficos, tales como El Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Bibliotecas de desarrollo C y C++, programas y archivos *.h"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Computadora servidor de red"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Servidor, Correo/Groupware/Noticias"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Estación de Juegos"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Reproductores y editores de vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedios - Gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programas de entretenimiento: arcade, tableros, estrategia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conjunto de herramientas para leer y enviar correo y noticiar (pine, mutt, "
-"tin...) y para navegar por la Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivado, emuladores, monitoreo"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanzas personales"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Entorno gráfico con un conjunto de herramientas de escritorio y aplicaciones "
-"amigables"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clientes para los distintos protocolos incluyendo a ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Pasarela de acceso a Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programas de reproducción/edición de sonido y vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Otros entornos gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editores, shells, manipulación de archivos, terminales"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programas para administrar sus finanzas, tales como gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Administración de la información personal"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedios - Grabación de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Estación de trabajo Científica"
diff --git a/perl-install/share/po/et.po b/perl-install/share/po/et.po
deleted file mode 100644
index d088213a6..000000000
--- a/perl-install/share/po/et.po
+++ /dev/null
@@ -1,14194 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# Riho Kurg <rx@linux.ee>, 1999-2001.
-# 
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 1999-10-28 19:54+0200\n"
-"Last-Translator: Riho Kurg <rx@linux.ee>\n"
-"Language-Team: Estonian <et@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-15\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Seadista k�ik monitorid s�ltumatult"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Kasuta Xinerama laiendusi"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Seadista ainult kaart \"%s\" (%s)"
-
-#
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Mitme monitori seadistamine"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"S�steemis on v�imalik kasutada mitut monitori.\n"
-"Mida Te soovite teha?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Graafikakaart"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Valige graafikakaart"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Valige X server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Valige X server"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Millise XFree konfiguratsiooni soovite kasutada?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n"
-"XFree %s toetab Teie videokaarti ja v�ib omada paremat 2D tuge."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Teie kaardi 3D graafikakiirendit toetab XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s koos 3D graafikakiirendi toega"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Teie videokaardi 3D graafikakiirendit saab kasutada koos XFree %s-ga.\n"
-"SEE ON AGA EKSPERIMENTAALNE JA V�IB OLLA EBASTABIILNE."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s koos EKSPERIMENTAALSE 3D kiirendi toega"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n"
-"SEE ON AGA EKSPERIMENTAALNE JA V�IB OLLA EBASTABIILNE.\n"
-"Teie kaarti toetab ka XFree %s, millel on ehk parem 2D tugi."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree s�tted"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Valige graafikam�lu suurus"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Valige X server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Valige monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Kaks kriitilist suurust on ekraanisagedus, mis m��rab kogu kuva\n"
-"uuendamise aja ja realaotussagedus\n"
-"\n"
-"On V�GA T�HTIS, et Te ei m��raks siinkohal monitori, mille realaotus on\n"
-"suurem kui Teie monitor v�imaldab. Vastasel juhul v�ib Teie monitor h�vida.\n"
-"Kui kahtlete, valige pigem v�iksem v��rtus."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Realaotussagedus"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Ekraaniuuendussagedus"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor ei ole seadistatud"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Graafikakaart ei ole veel seatud"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Kuvatihedus ei ole veel seatud"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Hoiatus: testimine v�ib Teie arvuti peatada"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Proovime seadistusi"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"proovige m�nd parameetrit muuta"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Tekkis mingi viga:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "J�tkub %d sekundi p�rast"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Kas see on �ige?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Tekkis mingi viga, proovige m�nd parameetrit muuta"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Kuvatihedus"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Valige kuvatihedus ja v�rvis�gavus"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Graafikakaart: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Veel.."
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "OK"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspertresiim"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "N�ita k�ike"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Kuvatihedused"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klaviatuuriasetus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Hiire t��p: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Hiire port: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Realaotussagedus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Ekraanisagedus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Graafikakaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Graafikakaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Videom�lu: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "V�rvis�gavus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Kuvatihedus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 juhtprogramm: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Valmistume X-i seadistamiseks"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Mida Te soovite teha?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Muuda monitori"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Muuda graafikakaardi"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Muuda serveri parameetreid"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Muuda kuvatihedust"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "N�ita lisainfot"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Proovi veel"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "V�lju"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"S�ilita muutused?\n"
-"Olemasolevad s�tted:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X stardib n��d"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Teie arvutis on v�imalik k�ivitada X juba alglaadimisel.\n"
-"Kas soovite nii teha?"
-
-# c-format
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Muudatuste aktiveerimiseks k�ivitage %s uuesti"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Palun v�ljuge ja vajutage siis Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 v�rvi (8 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tuhat v�rvi (15 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tuhat v�rvi (16 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljonit v�rvi (24 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljardit v�rvi (32 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB v�i rohkem"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA, 640x400 sagedusel 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "SVGA, 800x600 sagedusel 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-�hilduv, 1024x768, 87 Hz vahelej�tuga "
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "SVGA, 1024x768, 87 Hz vahelej�tuga, 800x600, 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "SVGA, 800x600 sagedusel 60 Hz, 640x480 sagedusel 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA, 1024x768 sagedusel 60 Hz, 800x600 sagedusel 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "K�rgsageduslik SVGA, 1024x768, 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Mitmesageduslik, 1280x1024 sagedusel 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Mitmesageduslik, 1280x1024 sagedusel 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Mitmesageduslik, 1280x1024 sagedusel 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Kuvatihedus saab olla 1600x1200 sagedusel 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Kuvatihedus saab olla 1600x1200 sagedusel 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Partitsiooni algusesse"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Ketta algusesse (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO installimine"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kuhu soovite alglaaduri installida"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub installimine"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO tekstiresiimis"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO graafikaresiimis"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Laadimine DOS/Windowsist (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Alglaaduri peas�tted"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Eelistatav alglaadur"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Alglaaduri peas�tted"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Alglaadimisseade"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ei t��ta vanema BIOSi korral)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompaktne"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompaktne"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Graafikamood"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Ooteaeg alglaadimisel"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Salas�na"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Salas�na (uuesti)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Piira k�surea suvandeid"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "piiratud"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Puhasta /tmp igal laadimisel"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Kui vaja, t�psusta RAM suurust (leitud %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "V�imalda mitut profiili"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Anna m�lu suurus megabaitides"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "S�te ``Piira k�surea suvandeid'' on ilma salas�nata mittekasutatav"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Palun proovige veel"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Salas�nad ei klapi"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Initsialiseerimisteade"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware viivitus"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Ajapiirang kerneli laadimisel"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "CD-lt laadimine lubatud?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "OF laadimine lubatud?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Vaikimisi OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Praegu on kasutusel sellised kirjed.\n"
-"Te v�ite neid lisada ning olemasolevaid muuta."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Lisa"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Tehtud"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Modifitseeri RAIDi"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Millisele sektorile soovite seda t�sta?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Muu OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Muu OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Muu OS (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Laadefail"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Juur"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Lisada"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Ebaturvaline"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "T�his"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Vaikimisi"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd suurus"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Eemalda kirje"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "T�hi kirjet�his ei ole lubatud"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Teil peab olema saaleala"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Selline t�his on juba kasutusel"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Leiti %s %s liidest"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "On Teil veel kaarte?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Kas Teil on ikka m�ni %s liides?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ei"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Jah"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Info riistvara kohta"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installime juhtprogrammil %s kaardile %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(moodul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Millist %s juhtprogrammi peaksime proovima?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"M�nedel juhtudel vajab %s juhtprogramm t��ks lisainformatsiooni\n"
-"kuigi tavaliselt saab ka ilma hakkama. Kas soovite eraldi parameetreid\n"
-"m��ratleda v�i lasta juhtprogrammil ise Teie arvutit kompida? V�ib juhtuda,\n"
-"et see viib arvuti segadusse kuid ei tohiks mingit j��vat kahju teha."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Proovida niisama"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "M��rake parameetrid"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"N��d v�ite moodulile %s parameetreid m��rata.\n"
-"Parameetrid on vormingus \"nimi=v��rtus nimi2=v��rtus2 ...\".\n"
-"N�iteks: \"io=0x300 irq=7\""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Mooduli parameetrid:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Moodule %s laadimine ei �nnestunud.\n"
-"Kas soovite proovida parameetreid muuta?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(juba lisatud %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Salas�na on liiga lihtne"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Palun andke kasutajatunnus"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Kasutajatunnus tohib sisaldada ainult v�ikesi t�hti, numbreid, - ja _"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "See kasutajatunnus on juba lisatud"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Lisa kasutaja"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Sisesta kasutaja\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Kasutaja �ige"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "P�risnimi"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Kasutajatunnus"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "K�surida"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikoon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Vaikimisi sisenemine"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Teie arvutit saab seada vaikimisi kasutaja sisenemisele.\n"
-"Kui Te seda ei soovi, valige <Katkesta>"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Valige uus vaikimisi kasutaja :"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Valige palun k�ivitatav aknahaldur:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Teisi keeli saab valida p�rast installimist"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "K�ik"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Tavakasutaja"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Isetehtud"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS k�ivitatakse"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Valige paketid mida soovite installida"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Katkesta"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Tere tulemast, kr�kkerid"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "V�hene"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Tavahiir"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "K�rge"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "K�rge"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoiline"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Seda tase muudab k�ll s�steemi lihtsalt kasutatavaks, kui v�ga\n"
-"haavatavaks: ligip��supiirangute puudumise t�ttu ei peaks arvutit �hendama\n"
-"ei teiste arvutitega ega ka mitte Internetti."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Salas�nad on n��d kasutusel, kuid v�rku �hendamine ei ole siiski soovitav."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"See on sobilik turvatase arvutile, mis �hendatakse Internetti kui klient."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr "Sellel turvatasemel v�ib s�steemi kasutada Internetis ka serverina."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"S�steem on t�ielikult suletud. V�rgust kasutamine on v�imalik ainult\n"
-"spetsiaalselt loodud juurdep��suteid kasutades."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Valige turvatase"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Turvataseme seadmine"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Valige X server"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Tere tulemast! Laadimisel aitab Teid %s!\n"
-"\n"
-"Valige nimekirjast eelistatav OS,\n"
-"vaikimisi oodake %d sekundit.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Tere tulemast! Laadimisel aitab Teid GRUB!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Kasutage valiku tegemiseks %c ja %c klahve"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Enter laeb Teie valiku, 'e' laseb muuta"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "suvandeid enne laadimist ja 'c' veel enam."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Valik laetakse automaatselt %d sekundi jooksul"
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "/boot on liiga t�is"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "T��laud"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Startmen��"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kuhu soovite alglaaduri installida"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "selle kohta (veel) abi ei saa.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Alglaaduri stiil"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fail"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fail/_V�lju"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle kategoriseeritud j�lgimine"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle j�lgimine"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tavaline j�lgimine"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Traditsiooniline Gtk+ j�lgimine"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "K�ivita alglaadimisel Aurora"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Valimisviis"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Alglaadimismood"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Interneti�henduse jagamise Abimees!\n"
-"\n"
-"%s\n"
-"\n"
-"Valige Abimehe k�ivitamiseks ``OK''"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Seadista"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "T��mood"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "K�ivita X-Windows alglaadimisel"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ei taha automaatselt siseneda"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"Jah, soovin automaatset sisselogimist sellele (kasutajale, keskkonnale)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ei saa lugeda faili /etc/inittab: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutit"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minut"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundit"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Partitsioone ei saa enam lisada"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Teisi keeli saab valida p�rast installimist"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Prantsusmaa"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belgia"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Saksa"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Kreeka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norra"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Vaata"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Itaalia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "seerial"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Palun tehke oma andmetest enne tagavarakoopia"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lugege hoolega!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Kui soovite kasutada aboot-i, j�tke palun ketta algusesse v�hemalt 2048 \n"
-"sektorit vaba ruumi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Viga"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Abimees"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Valige tegevus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Teil on �ks suur FAT partitsioon.\n"
-"(tavaliselt kasutab sellist MS DOS/Windows)\n"
-"Soovitame teil esmalt selle suurust muuta\n"
-"(klikkige ja siis valige \"Muuda\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Palun valige partitsioon"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "�ksikasjad"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "�hendamine eba�nnestus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Saaleala"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "T�hi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Muu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Failis�steemi t��bid: "
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Tekita"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "T��p"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Kasutage pigem ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Kustuta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Kasutage enne \"�henda lahti\""
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Partitsiooni %s t��bi muutmisel h�vivad k�ik seal olnud andmed"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Valige tegevus"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Looge uus partitsioon"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Tavakasutaja > Ekspert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Ekspert > Tavakasutaja"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Tagasi"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "J�tkate ikkagi?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "L�peta ilma salvestamata"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "L�petate ilma partitsioonitabelit salvestamata?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Paiguta ise"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Kustuta k�ik"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Meili informatsioon"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "K�ik primaarsed partitsioonid on kasutusel"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Partitsioone ei saa enam lisada"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Et saada rohkem partitsioone, kustutage palun �ks, et luua laiendatud "
-"partitsioon"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Kirjuta partitsioonitabel"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "P��sta partitsioonitabel"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "P��sta partitsioonitabel"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "P��sta partitsioonitabel"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "CD/flopi/.. auto�hendamine"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Valige fail"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Tabeli tagavarakoopia ei ole sama suurusega\n"
-"Soovite j�tkata?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Hoiatus"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Pange t�hi flopi masinasse\n"
-"K�ik andmed sellel h�vivad"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Proovin p��sta partitsioonitabelit"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Meili informatsioon"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "�henduspunkt"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Eelistused"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Muuda suurust"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Liiguta"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Vorminda"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "�henda"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Lisa RAIDi"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Lisa LVMi"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "�henda lahti"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Eemalda RAIDist"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Eemalda LVMist"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modifitseeri RAIDi"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Kasuta loopback-ina"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Looge uus partitsioon"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Algsektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Suurus (MB): "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Failis�steemi t��p: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "�henduspunkt:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Eelistus: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Vormindan loopback faili %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Muuda partitsiooni t��p"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Mis failis�steemi soovite kasutada?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kuhu soovite loopback-faili %s �hendada?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kuhu soovite seadme %s �hendada?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Seda �henduspunkti ei saa eemaldada, kuna partitsioon on kasutusel.\n"
-"loopback-ina. Eemaldage enne loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Arvutan FAT failis�steemi piire"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Muudan suurust"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "See partitsioon ei ole muudetav"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Selle partitsiooni andmetest v�iks olla tagavarakoopia"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Partitsiooni %s suuruse muutmisel h�vivad sellel k�ik andmed"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Valige uus suurus"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Suurus (MB): "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Millisele kettale soovite seda �mber paigutada?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Millisele sektorile soovite seda �mber paigutada?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Paigutan �mber"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Liigutan partitsiooni..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Vali olemasolev RAID, millele lisada"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "uus"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Vali olemasolev LVM, millele lisada"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM nimi?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Seda partitsiooni ei saa loopback-ina kasutada"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "loopback faili nimi:"
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "P�risnimi"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "See fail on juba loopback-ina kasutusel, valige m�ni muu"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Fail on juba olemas. Kas kasutan seda?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Mooduli parameetrid:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "seade"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "tase"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "�hiku suurus"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Vaadake ette: see v�ib olla ohtlik."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Mis t��pi partitsioonid teete?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Vabandan, aga ei saa n�ustuda /boot kataloogi paigutamisega kaugemale 1024-"
-"st silindrist.\n"
-"Kui kasutate LILO-t, ei t��ta see sel moel, kui aga ei kasuta, ei ole Teile "
-"ka /boot vajalik"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Partitsioon, mida soovite kasutada juurkataloogi (/) hoidmiseks, asub\n"
-"f��siliselt tagapool 1024-t silindrit ja Teil ei ole /boot partitsiooni.\n"
-"Kui plaanite kasutada LILO alglaadurit, lisage kindlasti /boot partitsioon"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Olete valinud juurpartitsiooniks (/) tarkvaralise RAID-i.\n"
-"Ilma /boot partitsioonita ei ole v�imalik sellist s�steemi laadida.\n"
-"Lisage kindlasti /boot partitsioon!"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Ketta %s partitsioonitabel salvestatakse!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Muudatuste j�ustamiseks vajate alglaadimist"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Partitsiooni %s vormindamisel h�vivad sellel k�ik andmed"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Vormindan"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Vormindan loopback faili %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Vormindan partitsiooni %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid eba�nnestus"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Kuvatihedus: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Seade: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS kettat�his: %s (arvatavasti)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "T��p: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nimi: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Algus: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Suurus: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorit"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindrid %d kuni %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Vormindatud\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Vormindamata\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "�hendatud\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "loopback fail(id): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partitsioonilt toimub alglaadimine\n"
-"    (MS-DOS-i, mitte lilo jaoks)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Tase %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "�hiku suurus %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-kettad %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "loopback faili nimi: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"V�imalik, et on tegemist\n"
-"juhtpartitsiooniga, parem oleks\n"
-"seda mitte puutuda.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"See on eriline, alglaadimisel\n"
-"kasutatav partitsioon, mis\n"
-"v�imaldab mitme operratsioonis�steemi\n"
-"laadimist.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Suurus: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geomeetria: %s silindrit, %s pead, %s sektorit\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-kettad %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitsioonitabeli t��p: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "siinil %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Eelistused: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Failis�steemi t��p: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Salas�na on liiga lihtne (peaks olema v�hemalt %d t�hem�rki)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Salas�nad ei klapi"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Muuda partitsiooni t��p"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Palun valige partitsioon"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Nimeserver"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s vormindamine seadmel %s eba�nnestus"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ei oska seadet %s vormindada t��pi %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "viga %s lahti �hendamisel: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "lihtne"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS ei ole kasutatav alla 16MB partisioonidel"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS ei ole kasutatav alla 32MB partisioonidel"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "�henduspunktid peavad algama kaldkriipsuga (/)"
-
-# c-format
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "�henduspunktile %s on juba �ks partitsioon m��ratud\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Te ei saa �henduspunkti %s jaoks LVM loogilist ketast kasutada"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "See kataloog peab j��ma kokku juurfailis�steemiga"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "See �henduspunkt vajab t�elist (ext2, reiserfs) failis�steemi\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Te ei saa �henduspunkti %s jaoks LVM loogilist ketast kasutada"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Ei ole piisavalt ruumi automaatpaigutuseks"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Seadme %s avamine kirjutamiseks eba�nnestus: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Tekkis viga: failis�steemi loomiseks ei leitud �htki seadet. Palun\n"
-"kontrollige oma riistvara."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Teil ei ole �htki partitsiooni!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"�lalpool on toodud k�ik Teie k�vakettal olemasolevad Linuxi partitsioonid\n"
-"Vaikimisi on need enamasti �sna m�istlikud. Kui teete nendes muutusi,\n"
-"pidage meeles, et kindlasti vajate juurpartitsiooni (\"/\"). Liiga v�ikeste\n"
-"partitsioonide puhul v�ib tekkida raskusi piisava hulga tarkvara "
-"installimisel\n"
-"Kasutajate jaoks on sageli m�istlik luua eraldi \"/home\" partitsioon.\n"
-"\n"
-"\n"
-"Iga partitsiooni juures on toodud abiinfona \"Nimi\" ja \"Mahutavus\".\n"
-"\n"
-"\n"
-"\"Nimi\" koosneb k�vakettat��bist, selle numbrist ja partitsiooni\n"
-"numbrist (n�iteks \"hda1\").\n"
-"\n"
-"\n"
-"K�vaketta t��p on \"hd\" kui on tegemist IDE kettaga ja \"sd\" kui on\n"
-"tegemist SCSI kettaga.\n"
-"\n"
-"\n"
-"K�vaketta number on alati t�ht \"hd\" v�i \"sd\" j�rel. IDE ketastel:\n"
-"\n"
-"   * \"a\" - esmase IDE kontrolleri �lem,\n"
-"\n"
-"   * \"b\" - esmase IDE kontrolleri alluv,\n"
-"\n"
-"   * \"c\" - teisase IDE kontrolleri �lem,\n"
-"\n"
-"   * \"d\" - teisase IDE kontrolleri alluv.\n"
-"\n"
-"SCSI ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"N��d saate valida, milliseid teenused peaks s�steemi laadimisel k�ivitama.\n"
-"\n"
-"\n"
-"Abiinfo balloonis antakse l�hike kirjeldus iga�he kohta neist.\n"
-"\n"
-"Kui kavatsete oma s�steemi kasutada serverina, olge eriti t�helepanelik:\n"
-"t�en�oliselt ei soovi te k�ivitada mittevajalikke teenuseid."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Olete j�udnud punkti, kus peate otsustama, kuhu t�pselt Mandrake Linux oma\n"
-"k�vakettal paigaldada. Kui k�vaketas on t�hi v�i kui m�ni muu \n"
-"operatsioonis�steem seda t�ielikult kasutab, on vaja partitsioneerida.\n"
-"Partitsioneerimine on tegevus, mille k�igus tekitatakse kettale loogilised\n"
-"piirkonnad Teie uue Mandrake Linux s�steemi installimiseks.\n"
-"\n"
-"\n"
-"Kuna partitsioneerimine ei ole p��ratav protsess, siis peab kogemusteta\n"
-"kasutaja olema ise�ranis ettevaatlik! Selle tegevuse lihtsustamiseks ja\n"
-"vigade v�hendamiseks on Teie jaoks loodudki k�esolev abimees. Siiski,\n"
-"palun varuga natuke ettevalmistusaega\n"
-"\n"
-"\n"
-"Mandrake Linux jaoks on Teil vaja v�hemalt kaht partitsiooni. �hele "
-"paigutatakse\n"
-"operatsioonis�steem ise ja teisele luuakse virtuaalm�lu (saaleala e. swap).\n"
-"\n"
-"\n"
-"Kui partitsioonid on juba loodud (eelmise installi v�i m�ne muu vahendi\n"
-"abil), siis peate need lihtsalt Linuxi paigaldamise jaoks v�lja valima.\n"
-"\n"
-"\n"
-"Kui partitsioone ei ole varem loodud, peate kasutama �lalttoodud abimeest.\n"
-"Abimees hindab Teie k�vaketast ja pakub j�rgmised valikud:\n"
-"\n"
-"* Kasuta olemasolevaid partitsioone: abimees leidis kettalt Linuxi "
-"partitsioonid.\n"
-"  Kui soovite neid kasutada, valige see.\n"
-"\n"
-"\n"
-"* Puhasta kogu ketas: kui soovite alustada Mandrake Linux installimist "
-"t�iesti t�hjale kettale.\n"
-"  T�helepanu: k�ik andmed, mis enne kettal olid, h�vivad!\n"
-"\n"
-"\n"
-"* Kasuta vaba ruumi Windowsi partitsioonil: kui Microsoft Windows kasutab "
-"kogu Teie k�vaketta vaba pinna,\n"
-"  saate luua lisaruumi Windowsi partitsiooni suuruse muutmisel.\n"
-"  Sageli on see m�istlik, kui soovite kasutada ka Windowst.\n"
-"\n"
-"* Asjatundja: kui soovite ise oma k�vaketast jagada, valige see. Nii on Teil "
-"k�ige rohkem v�imalusi,\n"
-"  aga ka k�ige rohkem ohtusid! �rge valige seda, kui Te t�pselt ei tea, mida "
-"teete."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"K�ik v�rskelt loodud partitsioonid tuleb enne kasutamist vormindada\n"
-"ehk sinna tuleb luua failis�steemid.\n"
-"\n"
-"\n"
-"Samuti v�ib vormindada varem olemas olnud partitsioonid, kui soovite\n"
-"seal leiduvad andmed �ra kustutada.\n"
-"\n"
-"\n"
-"Paneme t�hele, et alati ei ole k�igi vanade partitsioonide vormindamine\n"
-"vajalik.\n"
-"Kindlasti v�ib vormindada partitsioone, kus varem asus \"/\", \"/usr\"\n"
-"v�i \"/var\" aga kasutajate faile sisaldav \"/home\" v�iks j��da\n"
-"alles.\n"
-"\n"
-"\n"
-"Klikkige \"OK\", kui olete vormindamiseks valmis."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Teie Mandrake Linux s�steemi hakati n��d installima. Selleks v�ib\n"
-"olenevalt Teie poolt valitud pakettide arvust ja Teie arvuti kiirusest\n"
-"kuluda m�nik�mmend minutit.\n"
-"\n"
-"\n"
-"Palun veidi kannatlikkust."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"N��d peate valima partitsiooni(d), kuhu soovite Mandrake Linux installida.\n"
-"\n"
-"Partitsioon on loogiliselt eraldatud k�vaketta piirkond, mille suurust\n"
-"ei ole v�imalik hiljem, t��tavas s�steemis enam muuta. Samuti h�vivad\n"
-"partitsiooni kustutamisel k�ik sellel sisalduvad andmed.\n"
-"\n"
-"Et muuta seda tegevust lihtsamaks, on loodud Abimees, mille soovitused\n"
-"on harilikult m�istlikud.\n"
-"\n"
-"\n"
-"Partitsioonide loomiseks valige esmalt k�vaketas.\n"
-"\n"
-"\n"
-"Valitud ketta partitsioneerimiseks on j�rgmised v�imalused:\n"
-"\n"
-"   * Puhasta k�ik: kustutatakse k�ik olemasolevad partitsioonid sellel "
-"kettal\n"
-"\n"
-"\n"
-"   * Paiguta ise: sel juhul tekitatakse Linuxi jaoks vajalikud partitsioonid "
-"vabale kettapinnale automaatselt.\n"
-"\n"
-"\n"
-"   * P��sta partitsioonitabel: kui partitsioonitabel on vigastatud, v�ib "
-"proovida seda parandada. \n"
-"     Palun �rge sellega igaks juhuks palju arvestage.\n"
-"\n"
-"\n"
-"   * Lae uuesti: kui soovite t�histada k�ik enda tehtud muutused ja alustada "
-"algse partitsioonitabeliga\n"
-"\n"
-"\n"
-"   * Abimees: kui soovite uue partitsioonitabeli loomisel samm-sammulist "
-"juhatust.\n"
-"     Soovitav, kui ei ole varem midagi sellist teinud.\n"
-"\n"
-"\n"
-"   * Taasta flopilt: kui olete varem salvestanud koopia "
-"partitsioonitabelist\n"
-"     flopile, tuleb see n��d kasuks\n"
-"\n"
-"\n"
-"   * Salvesta flopile: kui soovite salvestada partitsioonitabeli flopile, "
-"et\n"
-"     vajadusel oleks v�imalik sealt taastada.\n"
-"\n"
-"\n"
-"   * Tehtud: kui olete partitsioneerimise l�petanud, siis saate muutused "
-"n��d salvestada\n"
-"\n"
-"\n"
-"Valitud partitsioonil on v�imalikud j�rgmised tegevused:\n"
-"\n"
-"           * Ctrl-c uue partitsiooni loomine\n"
-"\n"
-"           * Ctrl-d partitsiooni kustutamine\n"
-"\n"
-"           * Ctrl-m �henduspunkti seadmine"
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Teie arvuti k�vakettal on rohkem kui �ks Microsoft Windows partitsioon.\n"
-"Palun valige v�lja see, mille suurust soovite Mandrake Linux jaoks muuta.\n"
-"\n"
-"\n"
-"Teie abistamiseks on iga partitsioonidel n�idatud \"Nimi Linuxis\", \"Nimi "
-"Windowsis\" ja \"Mahutavus\".\n"
-"\n"
-"\"Nimi Linuxis\" koosneb k�vakettat��bist, selle numbrist ja partitsiooni\n"
-"numbrist (n�iteks \"hda1\").\n"
-"\n"
-"\n"
-"K�vaketta t��p on \"hd\" kui on tegemist IDE kettaga ja \"sd\" kui on\n"
-"tegemist SCSI kettaga.\n"
-"\n"
-"\n"
-"K�vaketta number on alati t�ht \"hd\" v�i \"sd\" j�rel. IDE ketastel:\n"
-"\n"
-"   * \"a\" - esmase IDE kontrolleri �lem,\n"
-"\n"
-"   * \"b\" - esmase IDE kontrolleri alluv,\n"
-"\n"
-"   * \"c\" - teisase IDE kontrolleri �lem,\n"
-"\n"
-"   * \"d\" - teisase IDE kontrolleri alluv.\n"
-"\n"
-"SCSI ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi.\n"
-"\n"
-"\n"
-"\"Nimi Windowsis\" on t�ht, millega Microsoft Windows vastavat seadet\n"
-"t�histab."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Palun natuke kannatust. Selleks v�ib kuluda m�nigi minut."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Palun valige \"Installimine\" kui Teie arvutis ei ole varasemat Mandrake "
-"Linux\n"
-"versiooni.\n"
-"\n"
-"\n"
-"Palun valige \"Uuendamine\" kui soovite uuendada varasemat Mandrake Linux "
-"versiooni.\n"
-"\n"
-"\n"
-"S�ltuvalt Teie GNU/Linuxi alastest teadmistest saate valida erineva tasemega "
-"installi- v�i uuendusmeetodi:\n"
-"\n"
-"* Soovituslik: Te ei ole varem GNU/Linuxit installinud. K�ik tehakse "
-"lihtsaks ja esitatakse v�he k�simusi\n"
-"\n"
-"\n"
-"* Isetehtud: Olete Linuxiga tuttav ja soovite s�steemi kohandada vastavalt\n"
-"  Teie vajadustele. J�rgmisena saate teha valikud s�ltuvalt Teie arvuti \n"
-"  edaspidisest kasutusalast.\n"
-"\n"
-"\n"
-"* Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-"  s�steemi, mis sobiks nagu valatult Teie t�psete ootustega.\n"
-"  Aga palun, palun: �RGE VALIGE SEDA, KUI TE T�PSELT EI TEA, MIDA TEETE!"
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Palun valige �ige port. N�iteks MS Windows-i COM1 kannab GNU/Linuxis\n"
-"nime ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (ehk LInux LOader) ja Grub on alglaadurid: nad v�imaldavad laadida\n"
-"kas GNU/Linuxi v�i m�ne muu Teie arvutis olevad operatsioonis�steemi.\n"
-"Tavaliselt tuvastakse teised operatsioonis�steemid �igesti ja seadistatakse\n"
-"ka alglaadur. Kui Teil aga ei ole �nne, tuleb parameetrid seada\n"
-"k�sitsi. Olge sel juhul hoolas valima �iged."
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"N��d peate valima, milliselt kettaosalt soovite GNU/Linuxit laadida.\n"
-"\n"
-"Valige \"K�vaketta esimene sektor (MBR)\", kui ei tea t�pselt, mida\n"
-"teha."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"Esmalt otsib DrakX PCI siini SCSI liideseid. Kui neid leitakse, ja \n"
-"vastav(ad) juhtprogramm(id) on teada, siis laetakse ja installitakse \n"
-"k�ik vajalik automaatselt.\n"
-"\n"
-"\n"
-"Kui Teie SCSI liides kasutab ISA siini v�i kui DrakX ei tea,\n"
-"millist juhtprogrammi kasutada v�i Teil ei ole �ldse SCSI liidest,\n"
-"siis k�sitakse Teilt selle kohta.\n"
-"Kui Teil SCSI liidest t�esti ei ole, vastake \"Ei\". Kui Teil aga siiski\n"
-"on, siis vastake \"Jah\". Seej�rel lastakse Teil nimekirjast sobiv\n"
-"juhtprogramm valida.\n"
-"\n"
-"\n"
-"Kui olete juhtprogrammi v�lja valinud, on Teil v�imalus anda sellele\n"
-"ka parameetreid. Siiski, enamasti l�heb k�ik kenasti ka ilma neid\n"
-"sisestamata: vastavad andmed leiab juhtprogramm ise.\n"
-"\n"
-"Kui automaatne parameetrite otsimine ei t��ta, tutvuge palun l�hemalt\n"
-"oma SCSI liidese dokumentatsiooniga v�i k�sige abi riistvara m��jalt.\n"
-"Vaadake ka User Guide'i (peat�kk 2, l�ik \"Collective informations on your\n"
-"hardware\")\n"
-"Ka samas masinas olev Windows oskab vahel SCSI kohta kasulikku \n"
-"informatsiooni anda."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Valige k�vaketas, mida soovite Mandrake Linux installimiseks puhastada\n"
-"Ettevaatust, k�ik sellel leiduvad andmed h�vitatakse ja ei ole enam\n"
-"taastatavad."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Valige \"OK\" kui soovite kustutada k�ik sellel kettal asuvad "
-"partitsioonid.\n"
-"Ettevaatust, peale \"OK\" klikkimist ei ole enam v�imalik sellelt kettalt\n"
-"andmeid taastada.\n"
-"\n"
-"\n"
-"Katkestamiseks valige \"Katkesta\"."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "�ldlevi kasutamine on ilma NIS domeenita v�imatu"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Pane FAT formaadis flopi seadmesse %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "See flopi ei ole FAT formaadis"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Et kasutada seda paketivalikut, alustage installimist k�sureaga \"linux "
-"defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Viga faili %s lugemisel"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Osa teie riistvarast n�uab tarnijapoolseid juhtprogramme.\n"
-"Informatsiooni nende kohta saate: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Teil peab olema juurpartitsioon.\n"
-"Selleks looge uus partitsioon (v�i valige �ks olemasolevatest).\n"
-"Siis valige tegevus \"�henduspunkt\" ja seadke see kui '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Teil peab olema saaleala"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Saaleala ei ole m��ratud\n"
-"\n"
-"J�tkate ikkagi?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Teil peab olema saaleala"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Kasuta vaba ruumi"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Kasuta olemasolevat partitsiooni"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Kasutatavat partitsiooni ei leitud"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Kasuta Windowsi partitsiooni loopback-ina"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Millisele partitsioonile soovite installida Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Valige suurused"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Juurpartitsiooni suurus (MB): "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Saaleala suurus (MB): "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Kasuta vaba ruumi Windowsi partitsioonil"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Mis partitsiooni soovite muuta?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Arvutan Windowsi failis�steemi piire"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT partitsiooni suurust ei �nnestu muuta, \n"
-"ilmnes selline viga: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Teie Windowsi partitsioon on fragmenteerunud, palun kasutada 'defrag'-i"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"HOIATUS!\n"
-"\n"
-"DrakX hakkab Teie Windowsi partitsiooni suurust muutma. Olge ettevaatlik:\n"
-"see operatsioon v�ib olla ohtlik Teie failidele. Palun kasutage enne\n"
-"scandisk-i, defrag-i ja tehke tagavarakoopia.\n"
-"Kui olete oma otsuses kindel, vajutage OK."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Kui palju ruumi j�tate Windowsi jaoks?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "Partitsioon %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Suuruse muutmine eba�nnestus: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr "Sobivat FAT partitsiooni ei leitud (ei ole piisavalt ruumi)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "T�hjenda kogu ketas"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Eemalda Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Teil on rohkem kui �ks k�vaketas, millisele neis installite Linuxi?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Kettal %s h�vivad K�IK partitsioonid ja andmed"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Partitsioneerin ise"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Kasuta fdisk-i"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"N��d saate partitsioneerida %s k�vaketta\n"
-"Kui olete valmis, salvestage k�suga 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Teil ei ole piisavalt vaba ruumi Windowsi partitsioonil"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Installimiseks ei ole �ldse ruumi"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX kettajagamise abimees leidis sellised lahendused:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ketta jagamine eba�nnestus: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "K�ivitame v�rguliidesed"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Seiskame v�rguliidesed"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Tekkis mingi viga, aga seda ei suuda programm ise klaarida.\n"
-"J�tkake omal vastutusel."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "�henduspunkt %s on m��ratud topelt"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"M�ned t�htsad paketid ei saanud korralikult paika.\n"
-"Teie CD-lugeja v�i CD on ilmselt vigane.\n"
-"Paketifaile CD-l saate kontrollida k�suga \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "See ongi %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Flopiseade ei ole k�ttesaadav"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "J�rgmine samm: '%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Teie s�steemil on ressursiprobleeme ja installimine v�ib eba�nnestuda.\n"
-"Kui nii juhtub, proovige palun tekstip�hjalist paigaldust. Selleks \n"
-"vajutaga laadimisel F1 ja sisestage 'text'"
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installi klass"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Palun valige �ks j�rgnevatest paigaldusklassidest"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Teie poolt valitud gruppide kogusuurus on umbes %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Kui soovite installida sellest v�hem, valige vastav protsent.\n"
-"\n"
-"Madalama protsendi puhul installitakse vaid k�ige t�htsamad paketid;\n"
-"100%% t�hendab k�ige valitud pakettide installimist."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, fuzzy, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Teil on kettal ruumi vaid %d%% pakettide jaoks.\n"
-"\n"
-"Kui soovite sellest v�hem, valige v�iksem protsent ja installimisele\n"
-"kuuluvad vaid olulisemad paketid."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "T�psemalt saate valida j�rgmisel sammul"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Installitavate pakettide protsent"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Paketigruppide valik"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Valik paketthaaval"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Suurus kokku: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Vigane pakett"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nimi: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versioon: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Suurus: %d kB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "T�htsus: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Seda paketti ei saa valida, kettaruumi ei ole paigalsuseks piisavalt"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Installimiseks on valitud j�rgmised paketid"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Eemaldamiseks on valitud j�rgmised paketid"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Seda paketti ei saa (mitte) valida"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "See pakett on kohustuslik"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "See pakett on juba installitud"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Selle paketi peaks uuendame\n"
-"Olete kindel, et Te ei vali seda?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Selle paketi peate valima, sest selle uuendamine on kohustuslik"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "N�ita automaatselt valitud pakette"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installimine"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Salvesta flopile"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Salvest paketivalik"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Eemaldamine"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Valige paketid installimiseks"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Installin"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Oletan"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Aega j��nud "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Palun oodake, valmistun installimiseks"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paketti"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Paketi %s installimine"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "N�us"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Keeldun"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Vahetage CD!\n"
-"\n"
-"Palun sisestage CD pealdisega \"%s\" lugejasse ja vajutage <OK>.\n"
-"Kui teil s�herdust ei ole, vajutage <Katkesta>"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Ikkagi edasi?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Pakettide tellimisel tekkis viga:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Pakettide installimisel tekkis viga:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Hoiatus\n"
-"\n"
-"Palun lugege hoolega alltoodud teksti. Kui Te ei ole k�igi allj�rgnevate\n"
-"v�idetega, on installimine j�rgmise CD pealt keelatud. Vajutage 'Keeldun', \n"
-"et j�tkata installimist ilma selle CD-ta.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Tekkis mingi viga"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Kas soovite v�rgu�hendust taask�ivitada?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "L�ppkasutaja litsentsileping"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"J�rgnev l�ppkasutaja litsents on eksimuste v�ltimiseks originaalkeeles\n"
-"\n"
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klaviatuur"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Palun valige klaviatuuriasetus"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "V�imalike klaviatuuride t�ielik nimekiri"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Millist installi klassi Te soovite"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installimine/Uuendus"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "On see installimine v�i taastamine?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Soovituslik"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Uuendus"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Salvest paketivalik"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Palun valige hiire t��p"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Hiire port"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Millisesse seerialporti on Teie hiir �hendatud?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Nuppude teesklemine"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Teeskle 2 hiirenupp"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Teeskle 3 hiirenuppu"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kaartide seadmine..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE seadistamine"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ei leia partitsioone"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Otsin partitsioonidelt �henduspunkte"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Valige �henduspunktid"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Partitsioonitabel on loetamatu, liiga rikutud DrakX-i jaoks :(\n"
-"Proovin loetamatud kirjed puhastada kuid ANDMED NENDEL H�VIVAD.\n"
-"Teine v�imalus on keelata DrakX-il partitsioonitabeli muutmine.\n"
-"(Viga oli selline: %s)\n"
-"Kas olete n�us partitsioonide kaotamisega?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ei saanud partitsioonitabeli lugemisega hakkama.\n"
-"J�tkate omal vastutusel!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Juurpartitsiooni ei leitud"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Juurpartitsioon"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Millisel partitsioonil hoiate juurkataloogi (/)?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Partitsioonitabeli s�ilitamiseks vajate alglaadimist"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Valige partitsioonid, mida soovite vormindada"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Blokkide kontroll?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Vormindan partitsioone"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Loon ja vormindan faili %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Saaleala on installimiseks liiga v�ike, palun lisage"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Otsin k�ttesaadavaid pakette"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Otsin uuendatavaid pakette"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Teie k�vakettal ei ole piisavalt vaba ruumi (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "T�ielik (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimaalne (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Soovitatav (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Taasta flopilt"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Taasta flopilt"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Paketigruppide valik"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Pane flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Salvesta flopile"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Valige pakett installimiseks"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Oodake"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Kui Teil on olemas k�ik alltoodud CD-d, klikkige <OK>.\n"
-"Kui Teil ei ole �htki neist, klikkige <Katkesta>.\n"
-"Kui puuduvad m�ned CD-d, m�rkige vaid olemasolevad ja siis <OK>."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD pealdisega \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Valmistun installimiseks"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Paketi %s installimine\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Paigaldusj�rgsed s�tted"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Pane flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Pange palun t�hi flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"N��d on Teil v�imalik oma s�steemi laadida kr�ptotarkvara.\n"
-"\n"
-"HOIATUS:\n"
-"\n"
-"L�htuvalt erinevatest sellisele tarkvarale kohaldavatest n�uetest ja \n"
-"m�jutatuna eri jurisdiktsioonide normidest peavad kliendid ja/v�i \n"
-"l�ppkasutajad olema kindlad, et nende asukohamaa jurisdiktsiooni "
-"�iguslikud \n"
-"aktid lubavad neil alla laadida, s�ilitada ja/v�i kasutada \n"
-"kr�ptograafiliste algoritmide realisatsioone sisaldavat tarkvara.\n"
-"\n"
-"Lisaks sellele peavad kliendid ja/v�i l�ppkasutajad j�lgima asukohamaa \n"
-"juriidiliste normide t�itmist. Kui klient ja/v�i l�ppkasutaja rikub "
-"kehtivaid \n"
-"�igusnorme, kohaldatakse karistus vastavalt asukohamaa seadustele.\n"
-"\n"
-"Mitte mingil juhul ei kanna Mandrakesoft S.A. ega tarkvara tarnija \n"
-"vastutust ei otseselt ega kaudselt tekkinud kahjude eest (kaasa arvatud, \n"
-"kuid mitte ainult, saamataj��nud tulu, �ritegevuse katkestamine, �riinfo \n"
-"kaotsimine ja muud rahalised kaotused ning v�imalikud kohtu poolt v�lja \n"
-"m�istetud h�vitused), mis tulenevad tarkvara, mis on kasutatav p�rast \n"
-"k�esoleva lepingu tingimustega n�ustumist, alla laadimisest, hoidmisest \n"
-"v�i kasutamisest.\n"
-"\n"
-"K�igi lepinguga seotud k�simuste asjus p��rduge palun aadressil: \n"
-"Mandrakesoft, Inc. \n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Proovin lugeda peeglilt pakettide nimekirja"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Valige peegel, millelt lugeda pakettide nimekiri"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Proovin lugeda peeglilt pakettide nimekirja"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Millises ajav��tmes asute?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Kas Teie arvuti sisekell on seatud GMT ajale?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS server:"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "CUPS printserver"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Printerit ei ole"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "On Teil veel kaarte?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Kokkuv�te"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Hiir"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Ajav��de"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN kaart"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Helikaart"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV kaart"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Kasuta NIS-i"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Kohalik printer"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Juurkasutaja salas�na"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Salas�na puudub"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Salas�na on liiga lihtne (peaks olema v�hemalt %d t�hem�rki)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentimisviis"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autentimisviis"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "NIS server:"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "NIS autentimine"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS domeen"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS server:"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Isetehtud alglaadimisketas annab Teile v�imaluse laadida Linux flopilt\n"
-"s�ltumata tavaliselt alglaadijast. See v�ib abiks olla, kui Te ei soovi\n"
-"SILO-t k�vakettale kirjutada v�i m�ni muu operatsioonis�steem SILO\n"
-"�ra kustutab v�i ei �nnestu SILO-t Teie riistvara peal kasutada.\n"
-"Alglaadmisflopi on kasutatav ka h�daabikettana, kui k�vakettal oleva\n"
-"failis�steemiga peaks mingi �nnetus juhtuma. Hoidke end ja Teid hoiab\n"
-"ka Jumal!\n"
-"\n"
-"Alglaadimisketta loomiseks asetage flopi esimesse seadmesse ning vajutage\n"
-"\"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Esimene flopiseade"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Teine flopiseade"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "J�ta vahele"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Isetehtud alglaadimisketas annab Teile v�imaluse laadida Linux flopilt\n"
-"s�ltumata tavaliselt alglaadijast. See v�ib abiks olla, kui Te ei soovi\n"
-"LILO-t (grubi) k�vakettale kirjutada v�i m�ni muu operatsioonis�steem LILO\n"
-"�ra kustutab v�i ei �nnestu LILO-t Teie riistvara peal kasutada.\n"
-"Alglaadmisflopi on kasutatav ka h�daabikettana, kui k�vakettal oleva\n"
-"failis�steemiga peaks mingi �nnetus juhtuma. Hoidke end ja Teid hoiab\n"
-"ka Jumal!\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Flopiseade ei ole k�ttesaadav"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Vali flopiseade, mida kasutad alglaadimisketta tegemiseks"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Pane flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Loome alglaadimisketta"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Alglaaduri s�tted"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Soovite aboot-i kasutada?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Viga aboot-i installimisel, \n"
-"kas forseerida, riskides esimese partitsiooni h�vinguga?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Alglaaduri s�tted"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Alglaaduri installimine eba�nnestus. Tekkis j�rgnev viga:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"You will need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  Hold down Command-Option-O-F\n"
-" at reboot and enter:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Pange palun t�hi flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Loon kiirpaigaldusflopi"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"M�ned sammud ei ole l�pule viidud\n"
-"\n"
-"Olete kindel, et v�ljute programmist?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"�nnitlen, installimine on edukalt l�petatud.\n"
-"V�tke palun v�lja flopi ja/v�i CD ja vajutage Enter alglaadimiseks.\n"
-"\n"
-"\n"
-"Informatsiooni selle distributsiooni paranduste kohta (Errata) saab\n"
-"Mandrake Linux kodulehek�ljelt \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Abi s�steemi edasiseks konfigureerimiseks saab eelk�ige dokumendist\n"
-"\"Official Mandrake Linux User's Guide\""
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Loo kiirpaigaldusflopi"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automaatne install v�ib olla ka sedav�rd tegija,\n"
-"et kasutab �ra kogu k�vaketta !!\n"
-"\n"
-"V�ite valida ka lihtsalt installi kordamise.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automaatne"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Korda"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Salvest paketivalik"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux installimine %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr " <Tab>/<Alt-Tab> v�ljade vahel  | <Space> valib | <F12> j�rgmine samm "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu puudub"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Valige tegevus"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Edasij�udnud"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Palun oodake"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Ava puu"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sule puu"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Sorteeritud v�i sorteerimata"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Halb valik, proovige palun uuesti\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Teie valik? (vaikimisi %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Teie valik? (vaikimisi %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Eelistused: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Soovite aboot-i kasutada?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Teie valik? (vaikimisi %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "T�ehhi (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Saksa"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "DVORAK"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Hispaania"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Soome"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Prantsuse"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norra"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Poola"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Vene"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Rootsi"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Briti"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iraani"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armeenia (vanem)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armeenia (tr�kimasin)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armeenia (foneetiline)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Aserbaid�aani (ladina)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgia"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armeenia (foneetiline)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaaria"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiilia (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Valgevene"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "�veitsi (Saksa asetus)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "�veitsi (Prantsuse asetus)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "T�ehhi (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Saksa (ilma sammuta)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Taani"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "DVORAK (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "DVORAK (Norra)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "DVORAK (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Eesti"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruusia (vene)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruusia (ladina)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Kreeka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungari"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroaadi"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Iisraeli"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Iisraeli foneetiline"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraani"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandi"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Itaalia"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Jaapani 106 klahviga"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korea"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Ladina-Ameerika"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Leedu AZERTY (vanem)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Leedu AZERTY (uuem)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Leedu numbrireaga QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Leedu foneetiline QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Asukoht"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedoonia"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Hollandi"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Poola (QWERTY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Poola (QWERTZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugali"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Vene (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Vene (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Vene (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Sloveenia"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaki (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Aserbaid�aani (kirillitsa)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabel"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tai"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Tai"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "T�rgi (\"F\" mudel)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "T�rgi (\"Q\" mudel)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukraina"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US (rahvusvaheline)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnami numbrireaga QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslaavia (koos kirillitsaga)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Ring�hendus %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Eemalda enne kettar�hmad (logical volumes)\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Suni hiir"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Lihtsalt PS2 rattaga hiir"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 nupp"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Lihtsalt 2-nupuline hiir"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Tavaline"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Ratas"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seerial"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Lihtsalt 3-nupuline hiir"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC seeria (seerial)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech (seerial, vana C7 t��pi)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "siinihiir"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 nuppu"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 nuppu"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ei soovi"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Hiirt ei ole"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Palun testige hiirt"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Hiire aktiveerimiseks"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "KEERUTAGE RATTAKEST!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "L�peta"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "J�rgmine ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Eelmine"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Kas see on sobiv?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Loo interneti�hendus"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"K�ige tavalisem �hendusviis ADSL jaoks on pppoe.\n"
-"M�nel juhul aga kasutatakse pptp-d, harva dhcp-d.\n"
-"Kui Te ei tea, kasutage pppoe-d"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Mis DHCP klienti soovite kasutada?\n"
-"Vaikimisi on dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"�htki v�rgukaarti ei �nnestunud tuvastada\n"
-"Seega ei saa ka sellist �hendust seadistada."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Valige v�rguliides"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Palun valige, millist v�rguliidest soovite interneti�henduse jaoks kasutada"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "v�rgukaarti ei leitud"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "V�rguseadistused"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Palun sisestage oma masina nimi.\n"
-"Seda n�uavad ka m�ned DHCP serverid.\n"
-"Masina nimi peab olema esitatud t�iskujul,\n"
-"nagu ``minumasin.minufirma.ee''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Masinanimi"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "V�rgu s�tete abimees"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "V�line ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Sisemine ISDN kaart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Millist ISDN �hendust kasutate?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Leitud tulem��ri s�tted!"
-
-#
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Leitud tulem��ri s�tted!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN s�tted"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Vali oma teenusepakkuja.\n"
-" Kui see ei ole nimekirjas, vali Tundmatu"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Laadimisprotokoll"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Euroopa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "�lej��nud maailm"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"�lej��nud maailm \n"
-" ilma D-kanalita"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Mis protokolli soovite kasutada?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Mis t��pi kaart Teil on?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ei tea"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Kui Teil on ISA kaart, siis peaks j�rgmised v��rtused olema �iged.\n"
-"\n"
-"Kui Teil on PCMCIA kaart, peaksite Te ise teadma selle IRQ ning IO "
-"v��rtusi.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Katkesta"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "J�tka"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Milline on Teie ISDN kaart?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Leidsin k�ll PCI ISDN kaardi, kui selle t��p on tundmatu. Palun valige �ks "
-"PCI kaart j�rgmisel sammul."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "PCI ISDN kaarti ei leitud. Palun valige �ks j�rgmisel sammul."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Millisesse seerialporti on Teie modem �hendatud?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "DialUp parameetrid"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "�henduse nimi"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Sissehelistamiskeskuse number"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Kasutajakonto"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skriptip�hine"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminalip�hine"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domeeninimi"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Esimene nimeserver (soovituslik)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Teine nimeserver (soovituslik)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Saate �henduse katkestada v�i uuesti seadistada."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Saate seadistada �henduse uuesti."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Hetkel olete Internetiga �hendatud."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Saate �henduda Internetti v�i seadistada �hendus uuesti."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Hetkel ei ole Te Internetti �hendatud."
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "�hendatud"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Lahuta..."
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Seadista TV-kaabli �hendus"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Interneti�henduse seadistamine"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Saate �henduse katkestada v�i uuesti seadistada."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Saate �henduse katkestada v�i uuesti seadistada."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "V�rgu s�tted"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"V�rgu�hendus on juba seadistatud, sest installitakse ju v�rgust.\n"
-"Kui soovite neid seadistusi s�ilitada, valige OK, muidu katkestage ja saate "
-"seadistada uuesti.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Interneti�henduse Abimees\n"
-"\n"
-"N��d hakkame interneti�hendust seadistama.\n"
-"Kui Te ei soovi automaatset tuvastamist siis j�tke see m�rkimata.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Valige profiil, mida seadistada"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Kasuta automaattuvastust"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Otsin printerit..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Tavaline modemi�hendus"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "leiti port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN �hendus"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "tuvastati %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN �hendus"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "leiti liidesel %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kaabli�hendus"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Kaabli�hendus"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN �hendus"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "v�rgukaart(i) leiti �les"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Valige kasutatav vahend"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Interneti�henduse jagamine"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Kas soovite luua �henduse juba alglaadimisel?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "V�rgus�tted"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Kas soovite v�rgu�hendust taask�ivitada?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"�nnitleme, v�rgundus ja interneti�hendus on seadistatud.\n"
-"\n"
-"S�tted salvestatakse n��d.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Soovitame taask�ivitada ka X keskkonna, et v�ltida v�imalikke\n"
-"masinanime muutmisest tingitud probleeme."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"HOIATUS: See seade on juba seadistatud Interneti jaoks.\n"
-"Valige lihtsalt OK, et s�tteid mitte muuta."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Palun andke IP parameetrid selle masina jaoks.\n"
-"K�ik read tuleb sisestada IP-aadressi kujul\n"
-"(N�iteks 12.34.56.78)"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Seadistame v�rgukaardi %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (juhtprogramm %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-aadress"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "V�rgu mask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automaatne IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-aadress peab olema formaadis 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Palun sisestage oma masina nimi.\n"
-"Masina nimi peab olema esitatud t�iskujul,\n"
-"nagu ``minumasin.minufirma.ee''.\n"
-"Kui Teil on vaikimisi l��s, siis sisestage ka selle IP-aadress"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Nimeserver"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "L��sipoolne seade"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Vahendajate s�tted"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP vahendaja"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP vahendaja"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Vahendaja peab olema kujul http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Vahendaja peab olema kujul ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Interneti s�tted"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Kas soovite oma interneti�hendust proovida?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testime Teie �hendust..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "S�steem on n��d Internetti �hendatud"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Turvakaalutlusel katkestan n��d �henduse."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Paistab, et s�steem ei ole Internetti �hendatud.\n"
-"Palun seadistage �hendus uuesti."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Interneti�henduse s�tted"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Palun t�ida allpool olev v�li"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kaardi IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kaardi m�lu (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kaardi IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kaardi IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kaardi IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Teie telefoninumber"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Teenusepakkuja tunnus (n�iteks minuisp.ee)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Sissehelistamiskeskuse number"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 (v�ib j�tta t�hjaks)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 (v�ib j�tta t�hjaks)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Klaviatuuri valik"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Valimisviis"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "�henduse t��p: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "�henduse t��p: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Kasutajatunnus"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Salas�na"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "�hendamine eba�nnestus: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Sellel platformil ei saa laiendatud partitsiooni luua"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Partitsioonitabelis on miskip�rast t�hi koht, aga see ei ole kasutatav.\n"
-"Ainuke lahendus on nihutada primaarset partitsiooni, et auk satuks "
-"laiendatud partitsioonide k�rvale"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Taastamine failist %s eba�nnestus: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "K�lbmatu tagavarakoopia"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Viga faili %s kirjutamisel"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Teie k�vakettal juhtub imelikke asju. \n"
-"Andmete pidevuse kontroll eba�nnestus. \n"
-"See t�hendab, et kettale kirjutamisel tekivad jamad"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "vajalik"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "t�htis"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "v�ga kena"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "kena"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "v�ib olla"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Kohalik printer"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "V�rguprinter"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "CUPS printserver"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "lpd printserver"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "V�rguprinter (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Printserver:"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Printeri seadme URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Kohalik printer"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "V�rguprinter"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Viga faili %s kirjutamisel"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(moodul %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS serveri IP"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Vaikimisi)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Vali printeri �hendusviis"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kuidas on see printer �hendatud?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Kui v�rgus on CUPS server, siis ei ole Teil vaja siin\n"
-"printereid seadistada, need leitakse automaatselt.\n"
-"Kui kahtlete, valige \"CUPS printserver\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "LAN s�tted"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "CUPS printserver"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-aadress peab olema formaadis 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Pordi number peab olema ikkagi number"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS serveri IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Alglaaduri stiil"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Otsin printerit..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Proovin porte"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Printerit ei ole"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Kohalik printer"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "V�rguprinter"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Kasuta automaattuvastust"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "V�rguprinter"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "tuvastati %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Printeri seadme URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Kohalik printer"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Millisesse seerialporti on Teie modem �hendatud?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Printeri seadme URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Seadistused"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Paketi %s installimine"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Paketi %s installimine"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "V�rguprinteri s�tted"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Et kasutada teise masina lpd printerit, peate sisestama\n"
-"printserveri nime ja prindij�rjekorra nime, mida soovite\n"
-"serveril kasutada."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Printserveri nimi:"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "V�rguprinter"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Printserveri nimi:"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Printserveri nimi:"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) printeri s�tted"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Et printida SMB printerile, peate andma vastava server SMB nimi\n"
-"(NB! See ei pruugi kokku langeda TCP/IP nimega!) ja v�ibolla ka\n"
-"printserveri IP-aadressi, samuti ka serveri poolt jagatava printeri\n"
-"nime ning serveri poolt aktsepteeritud kasutajatunnuse, salas�na ja t��grupi"
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB serveri nimi"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB serveri IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Jagatav printer"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "T��grupp"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare printeri s�tted"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Et kasutada NetWare printerit, peate sisestama NetWare printserveri\n"
-"nime (NB! See v�ib olla erinev tema TCP/IP nimest!) samuti nagu ka\n"
-"prindij�rjekorra nime serveril ning kasutajatunnuse ja salas�na"
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printserver:"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Prindij�rjekorra nimi:"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Pistikprinteri s�tted"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Sisestage palun printeri masinanimi ja v�imaluse\n"
-"korral pordi number"
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Printeri nimi"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Printeri nimi"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Printeri seadme URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Printeri nimi"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Kirjeldus"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Asukoht"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "V�rguprinter"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Kas see on sobiv?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "V�rguprinter"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Printeri �hendusviis"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Mis t��pi printer see on?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Interneti s�tted"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Interneti s�tted"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Proovin porte"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Jah, tr�ki m�lemad testlehek�ljed"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Printer"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standardt��riistad"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Tr�kitakse testlehek�lg(i)..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Tr�kitakse testlehek�lg(i)..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Tr�kitakse testlehek�lg(i)..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Tr�kitakse testlehek�lg(i)..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testlehek�lg on saadetus tr�kideemonile.\n"
-"N��d v�ib minna natuke aega.\n"
-"Staatus:\n"
-"%s\n"
-"\n"
-"Kas tulemust on juba n�ha?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testlehek�lg on saadetud tr�kideemonile.\n"
-"N��d v�ib minna natuke aega.\n"
-"Staatus:\n"
-"%s\n"
-"\n"
-"Kas tulemust on juba n�ha?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Printerit ei ole"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Hiir"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Seiskame v�rguliidesed"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Seiskame v�rguliidesed"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Otse �hendatud printeri s�tted"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Interneti s�tted"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Printeri nimi tohib sisaldada vaid t�hti, numbreid ja alakriipsu"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Printerit ei ole"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Sea printer"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Testime Teie �hendust..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "V�rgus�tted"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor ei ole seadistatud"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "V�rguseadistused"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Millist printimiss�steemi soovite kasutada?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "K�rge"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoiline"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Millist printimiss�steemi soovite kasutada?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Vali printeri �hendusviis"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Millist printimiss�steemi soovite kasutada?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Printeri s�tted"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Paketi %s installimine"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Otse �hendatud printeri s�tted"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Printeri s�tted"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Kas soovite printerit seadistada?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "PrinterDrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Kirjeldatud on j�rgnevad prindij�rjekorrad.\n"
-"Te v�ite neid lisada ning olemasolevaid muuta."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Kirjeldatud on j�rgnevad prindij�rjekorrad.\n"
-"Te v�ite neid lisada ning olemasolevaid muuta."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "V�rgus�tted"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Tavakasutus"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Interneti s�tted"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Interneti�henduse jagamine"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Printeri �hendusviis"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Tr�kitakse testlehek�lg(i)..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "V�rguprinter"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Kohalik printer"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Kas soovite v�rgu�hendust taask�ivitada?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Vahendajate s�tted"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Vahendaja peab olema kujul http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Pordi number peab olema ikkagi number"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Vahendaja peab olema kujul ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Vaikimisi sisenemine"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Salas�na"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Salas�na puudub"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Salas�nad ei klapi"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Juba vormindatud RAID-ile (md%d) ei saa partitsiooni lisada"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ei saa kirjutada faili %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid eba�nnestus"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid eba�nnestus (puudub 'raidtools'?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ei ole piisavalt partitsiooni RAID-%d jaoks\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-"Anacron k�ivitab programme perioodiliselt analoogiliselt cron-ile.\n"
-"Kasutage seda juhul kui Teie arvuti ei t��ta 24h."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd on kasutusel p�hiliselt s�learvutites, akude t�ituvuse j�lgimiseks.\n"
-"Samuti suudab see aku t�hjenemisel s�steemi viisakalt maha v�tta."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Laseb k�ivitada �hekordseid k�ske etteantud ajal v�i ootab s�steemi\n"
-"koormuse laskumist k�su k�ivitamiseks piisavale tasemele."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron on UNIXi s�steemide standardvahend kasutaja programmide perioodiliseks\n"
-"k�ivitamiseks. Vixie cron sisaldab lisaks veel turvalisust ja kasutus-\n"
-"mugavust t�stvaid omadusi. Soovitav s�steemile mis t��tab 24h"
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM annab v�imaluse kasutada hiirt ka tekstikonsoolil. Lisaks tavalisele\n"
-"l�ikamisele/kleepimisele saab kasutada ka men��s�steeme."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache on maailma juhtiv veebiserveri programm. T�en�oliselt\n"
-"ka v�imsaim."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneti \"superserver\", nimega inetd laseb k�ivitada mitmeid v�rgu-\n"
-"teenustel, nagu telnet, ftp, rsh, rlogin jne."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"See programm laeb s�steemi k�ivitumisel klaviatuuripaigutuse vastavalt\n"
-"failis /etc/sysconfig/keyboard kirjeldatule."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr "lpd on tr�kideemon, ilma selleta ei ole v�imalik printida."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) on kasutusel nimeserverites, mis teenindavad DNS\n"
-"hierarhiat, t�lkimaks nimesid IP-aadressideks"
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"�hendab ja lahutab k�iki v�rgufailis�steeme (nii NFS, SMB\n"
-"kui ka NCP)"
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr "Aktiveerib s�steemi laadimisel Teile vajalikud v�rguliidesed."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS on UNIXi keskkonna standardne failijaotusprotokoll. See programm t�idab\n"
-"NFS serveri funktsioone, ja konfigureeritakse failis /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS on UNIXi keskkonna standardne failijaotusprotokoll. See programm t�idab\n"
-"NFS failide lukustamise funktsioone. Vajalik serveerimisel."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA tugi on tavaliselt vajalik s�learvutitele v�rgu- ja modemiliideste\n"
-"lisamiseks."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper haldab RPC �hendusi, mida kasutavad NFS ja NIS. Neil \n"
-"serveritel on see h�davajalik."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix on meili transpordiagent, see t�hendab programm, mis\n"
-"toimetab meili �hest masinast teise."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Salvestab ja taastab juhuarvude genereerimiseks vajaliku s�steemse\n"
-"entroopiasalve."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed on RIP deemon, mis vahetab selle protokolli alusel marsruutimis-\n"
-"infot. Kui Teil on RIP kasutusel, on vajalik ka routed."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokoll laseb �le v�rgu saada informatsiooni s�steemi\n"
-"t�� kohta. Ettevaatust!"
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokoll laseb �le v�rgu saada informatsiooni s�steemi\n"
-"kasutajate kohta. Ettevaatust!"
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokoll laseb �le v�rgu saada informatsiooni s�steemi\n"
-"kasutajate kohta. Ettevaatust!"
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "K�ivita X-Windows alglaadimisel"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr "syslog-i kaudu toimub s�steemis toimiva logimine. Vajalik!"
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Stardib X fondiserveri, selleta X ei k�ivitu."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Valige, millised teenused tuleks alglaadimisel k�ivitada"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Printer"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "T��mood"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "V�rguprinteri s�tted"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Server, Andmebaasid"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "seade"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "k�imas"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "peatatud"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Teenused ja deemonid"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Selle teenuse kohta ei oska\n"
-"lisainformatsiooni anda."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Alglaadimisel"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Olek:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "�lej��nud maailm"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Interneti�hendus"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimeedia - Graafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Arendus"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Juhtimiskeskus"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "V�rguliides"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB serveri nimi"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "M�ngud"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "ekspert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "kohustuslik"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Paketi %s installimine"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Partitsioonitabel on loetamatu, liiga rikutud DrakX-i jaoks :(\n"
-"Proovin loetamatud kirjed puhastada"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Viga"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Paigaldusj�rgsed s�tted"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Alglaaduri stiil"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "�nnitleme!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Installimine"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Tavakasutaja"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Vormindan loopback faili %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "K�lbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "K�lbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "K�lbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Paketigruppide valik"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Eemalda prindij�rjekord"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Eemalda Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Kasutajatunnus"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Palun testige hiirt"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Palun proovige veel"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Palun proovige veel"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Salas�na puudub"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN �hendus"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Vali printeri �hendusviis"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Palun valige klaviatuuriasetus"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Palun valige partitsioon"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "K�lbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Palun testige hiirt"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "K�lbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "V�rgu mask:"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Kasutajatunnus"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Kas optimiseerime k�vaketast?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Kas optimiseerime k�vaketast?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Oodake"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Ratas"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Ratas"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Mooduli parameetrid:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "V�rgu s�tted"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-#, fuzzy
-msgid "across Network"
-msgstr "V�rgu mask:"
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Failis�steemid"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Eelistused"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Millisesse seerialporti on Teie modem �hendatud?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "V�rgu s�tted"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "K�lbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Palun valige hiire t��p"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "K�lbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Taasta flopilt"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Palun valige hiire t��p"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Muu"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "S�steemi installimine"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Taasta failist"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Taasta failist"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Isetehtud"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Abi"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Eelmine"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Olek:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "K�lbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Taasta failist"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Tekst"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Pakettide valik"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "K�lbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "K�lbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "K�lbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Salvesta faili"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Palun testige hiirt"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "V�rgu s�tted"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "V�rgu s�tted"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "LAN s�tted"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "ISDN s�tted"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Failis�steemid"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s installimine eba�nnestus. Tekkis j�rgnev viga:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s ei leitud"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Tehtud"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Vorminda flopi"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Valmistun installimiseks"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "piiratud"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "piiratud"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Vormindamine"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "RPM-ide eemaldamine"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "ISDN s�tted"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "�henduspunkt"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Valige partitsioonid, mida soovite vormindada"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Kontor"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Katkesta"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Printer"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "S�steemi installimine"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Valige fail"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "V�rguprinter"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Initsialiseerimisteade"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Teie s�steemis ei ole v�rgukaarti!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Installimine"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Teie s�steemis ei ole v�rgukaarti!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "V�lju programmist"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Interneti�henduse jagamine"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Interneti�henduse jagamine t��tab"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneti�henduse jagamine on juba seadistatud ja see on\n"
-"ka praegu aktiivne.\n"
-"\n"
-"Mida Te soovite teha?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "keela"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "t�hista"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "seadista uuesti"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Peaten serverid..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Interneti�hendust n��d enam ei jagata"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Interneti�hendust hetkel ei jagata"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneti�henduse jagamine on juba seadistatud aga hetkel\n"
-"on see keelatud.\n"
-"\n"
-"Mida Te soovite teha?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "luba"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "K�ivitan serverid..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Interneti�henduse jagamine n��d t��tab"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"N��d on Teil v�imalik seadistada oma arvutit interneti�hendust jagama.\n"
-"\n"
-"M�rkus: kohtv�rgu (LAN) jaoks on vajalik eraldi v�rgukaardi olemasolu."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Liides %s (kasutab moodulit %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Liides %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Teie s�steemis ei ole v�rgukaarti!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"�htki v�rgukaarti ei ole hetkel seadistatud. Palun kasutage selleks "
-"riistvara s�tteseadjat."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "V�rguliides"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Teil on vaid �ks seadistatud v�rguliides:\n"
-"\n"
-"%s\n"
-"\n"
-"Kohtv�rgu s�tted seotakse selle liidesga."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Palun valige millist v�rguliidest soovite kasutada kohtv�rgu\n"
-"jaoks."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor ei ole seadistatud"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Alglaaduri stiil"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Interneti s�tted"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS serveri IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "V�imalik kohtv�rgu aadressi konflikt %s konfiguratsioonis!\n"
-
-#
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Leitud tulem��ri s�tted!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Hoiatus! Leiti olemasolevad tulem��ri s�tted. T�en�oliselt peaksite need "
-"hiljem �le vaatame."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Seadistan..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "H��lestan skriptid, installin tarkvara, k�ivitan serverid..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleemid paketi %s installimisel"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"K�ik on seadistatud.\n"
-"N��d saate interneti�hendust jagada teistele kohtv�rgu arvutitele, kasutades "
-"neil automaatset konfigureerimist (DHCP)"
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Interneti�henduse jagamine on juba seadistatud aga hetkel keelatud."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Interneti�henduse jagamine on juba seadistatud ja see on praegu aktiivne."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Interneti�henduse jagamist ei ole kunagi seadistatud"
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Interneti jagamise seadistamine"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Interneti�henduse jagamise Abimees!\n"
-"\n"
-"%s\n"
-"\n"
-"Valige Abimehe k�ivitamiseks ``OK''"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "V�rgus�tted (%d liidest)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profiil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Kustuta profiil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profiil kustutamiseks:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Uus profiil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Masinanimi: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Interneti�hendus"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "T��p: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Vaikel��s:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Liides:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Olek:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Seadiste interneti�hendus..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN s�tted"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Juhtprogramm"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Liides"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Olek:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Seadista kohtv�rk (LAN) ..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Abimees..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Rakenda"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Palun oodake... Rakendan seadistusi"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "�hendatud"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Ei ole �hendatud"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "�henda..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Lahuta..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN s�tted"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "V�rgukaart %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Laadimisprotokoll"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "K�ivitub laadimisel"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Aktiivne"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Aktiivne"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Interneti�henduse seadistamine"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Interneti�henduse seadistamine"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "�henduse t��p: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameetrid"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Vaikel��s"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "V�rgukaart"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Turvataseme seadmine"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Juhtimiskeskus"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Valige kasutatav vahend"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanada (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Euroopa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandi"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Euroopa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "seerial"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "kasutamiseks: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Palun valige klaviatuuriasetus"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Kas soovite konsoolil kasutada BackSpace-i kui Delete?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Vaheta CD plaat"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Palun sisestage installeerimise CD pealdisega lugejasse ja vajutage <OK>.\n"
-"Kui teil s�herdust ei ole, vajutage <Katkesta>, et kiiruendust v�ltida."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ei saa kiiruuendust alustada !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-#, fuzzy
-msgid "logdrake"
-msgstr "DrakNet"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fail/_Uus"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fail/_Ava"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fail/_Salvesta"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fail/Salvesta _Kui"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fail/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Eelistused"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Eelistused/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Abi"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Abi/_Misv�rk"
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Kasutajatunnus"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Initsialiseerimisteade"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "Masin:"
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "Masin:"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "LAN s�tted"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache ja Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "varjutatud"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "huvitav"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "vormindatakse"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Seadistused"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Salvesta kui..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Palun valige hiire t��p"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ei leitud: serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Teeskleme keskmist hiirenuppu?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Valige graafikakaart"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Alglaadimisseade"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Tulem��ri s�tted"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Tulem��ri s�tted"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Tulem��r\n"
-"\n"
-"Tulem��ri olete juba seadistanud.\n"
-"Valige 'Seadista', et midagi muuta"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Tulem��r\n"
-"\n"
-"Valige 'Seadista', selle seadistamiseks n��d"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Valige sobiv keel"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Valige paigaldusmeetod"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "K�vaketta leidmine"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Hiire seadmine"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Klaviatuuri valik"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Turvalisus"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Failis�steemid"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Vormindamine"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Pakettide valik"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "S�steemi installimine"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Tavakasutaja"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "V�rgus�tted"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Teenuste s�tted"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Alglaaduri s�tted"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Loo alglaadimisflopi"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Seadista X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "S�steemi installimine"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "V�lju programmist"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall seadistamine\n"
-"\n"
-"Selle vahendiga saate luua lihtsa kaitse Interneti ohtude vastu.\n"
-"Kui vajate v�imsat tulem��ri, vaadake palun\n"
-"spetsiaalset MandrakeSecurity Firewall distributsiooni."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"N��d k�sitakse Teilt millistele teenustele soovite lubada ligip��su\n"
-"Internetist. Palun m�elge hoolega, nende vastuste �le, sest tegu on\n"
-"ju Teie arvuti turvalisusega.\n"
-"\n"
-"Palun, kui te ei soovi hetkel m�nd neist kasutada, pange see igaks\n"
-"juhuks tulem��ri taha. Hiljem on Teil soovi korral vaba voli k�ike\n"
-"uuesti lubada."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Kas sellel arvutil hakkab t��le veebiserver, mida k�lastatakse kogu\n"
-"Internetist? Kui vajate ligip��su vaid samast arvutist, vastake\n"
-"siin EI.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Kas sellel arvutil hakkab t��le nimeserver? Kui Te seda ei soovi\n"
-"siis vastake palun ei.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Kas soovite sisenevaid SSH �hendusi? SSH on turvaline asendus telnetile.\n"
-"Telneti kaudu �le v�rgu masinasse sisenemine on ��rmisel ebaturvaline\n"
-"kuna sel teel on lihtsate vahenditega v�imalik v�rgus paroole varastada.\n"
-"SSH korral on �hendus kr�ptitud ja pealtkuulamine praktiliselt v�listatud."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Kas soovite lubada sisenevaid telneti �hendusi?\n"
-"See on t�eliselt ebaturvaline, vastake siin palun Ei ja kasutage\n"
-"telneti asemel SSH-d.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Kas soovite sellel arvuti k�ivitada avaliku FTP serveri? Kui see on\n"
-"t�esti Teie soov, siis lubage palun ainult anon��mne ligip��s, sest\n"
-"muul juhul tekib j�lle paroolide varastamise oht, sest FTP ei tunne\n"
-"kr�ptimist.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Kas Teil on jooksmas avalik meiliserver? Vastasel juhul on\n"
-"palju turvalisem siia tulem� ette panna.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Kas vajate sellel masinal POP v�i IMAP serverit?\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Teil on kasutusel 2.2 kernel. Kui IP aadress antakse Teie arvutile\n"
-"d�naamiliselt, siis peaks seda siinkohal lubama.\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Kas see arvuti kuulub v�rku, millest masinad s�nkroniseerivad\n"
-"omavahel kellaaega? T�en�oliselt v�ite selle rahulikult keelata."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Seadistused tehtud. Kas salvestada s�tted kettale?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "V�rgukaart %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Seadme %s avamine kirjutamiseks eba�nnestus: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "V�rgu s�tete abimees"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Palun oodake, valmistun installimiseks"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Server, Veeb/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "V�rguarvuti (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS, SMB, SSH server, vahendaja (proxy)"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kontor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome t��jaam"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Suhtlus Palmi v�i Visoriga"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "T��jaam"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Tulem��r/marsruuter"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kontoriprogrammid: tekstit��tlus (kword, abiword), tabelarvutus (kspread, "
-"gnumeric), PDF eelvaade jne"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio-v�rgid: mp3 ja midi, mikserid jms"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Raamatud ja Howto-d Linux ja vabavara kohta"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE t��jaam"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm jt"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimeedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Meili, uudiste, veebi, jututamise ja faili�lekande programmid"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Server, Andmebaasid"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Vahendid lihtsamaks s�steemi administreerimiseks"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimeedia - Heli"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utiliidid"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentatsioon"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsooliprogrammid"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Interneti t��jaam"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimeedia t��jaam"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN s�tted"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Veel graafilisi t��laudu (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, graafiline t��keskkond ja rida seonduvaid rakendusi"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Graafiline keskkond"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache ja Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Vahendid CD-de kirjutamiseks"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kontori t��jaam"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm jne"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Graafikaprogrammid nagu Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C ja C++ arendusteegid, programmid ja p�isefailid"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Failiserver"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, Meil/grupit��/uudised"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "M�nguvahend"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video esitamine ja redigeerimine"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimeedia - Graafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Meelelahutus: arcade, boards, strategy jne"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr "Komplekt programme meili ja uudiste lugemiseks ning veebi brausimiseks"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhiveerimine, emuleerimine, monitoorimine"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Isiklikud finantsid"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Graafiline t��keskkond koos kasutajas�bralike rakendustega"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Mitmete protokollide, sealhulgas ssh kliendid"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Interneti�hendus"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Heli ja video esitamine ja redigeerimine"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Muud graafilised t��lauad"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editorid, shellid, terminalid, failihaldus"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Isiklike finantside haldusvahendid"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Isikliku info haldamine"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimeedia - CD kirjutamine"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Teadust��jaam"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Katkesta"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Ei soovi"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Valige uus vaikimisi kasutaja :"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "V�rguprinter"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "N��d v�ite moodulile %s parameetreid m��rata"
-
-#~ msgid "mount failed"
-#~ msgstr "�hendamine eba�nnestus"
-
-#~ msgid "Low"
-#~ msgstr "Madal"
-
-#~ msgid "Medium"
-#~ msgstr "Keskmine"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr "Turvataset on parandatud, lisatud on hoiatusi ja piiranguid."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Multimeedia"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Ekspert"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Linuxil on kombeks hoida sisemist kella Greenwichi (GMT) ajas ja muuta\n"
-#~ "vajadusel s�steemi kella vastavalt Teie valitud ajav��ndile."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Loo interneti�hendus"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Katkesta interneti�hendus"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Seadista v�rgu�hendus (kohtv�rk v�i Internet)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Millisele kettale soovite seda �mber paigutada?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Palun valige paketid installimiseks"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Info"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome t��jaam"
-
-#, fuzzy
-#~ msgid "user"
-#~ msgstr "Kasutaja:"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Palun valige hiire t��p"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "V�lju"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "CD/flopi/.. auto�hendamine"
-
-#~ msgid "Active"
-#~ msgstr "Aktiivne"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Ei"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Leiti printer, nimega \"%s\" "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Otse �hendatud printer"
-
-#~ msgid "Printer Device"
-#~ msgstr "Printeri seade"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "CUPS printserver"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "CUPS printserver"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "T��mood"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Muu"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Palun valige klaviatuuriasetus"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Palun valige partitsioon"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "T��p: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "K�lbmatu tagavarakoopia"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Seadista X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Printeri seade"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Katkesta"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "OK"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Hiir"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "tuut"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "Testime Teie �hendust..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Sulgeme n��d �henduse..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "V�rgu�hendus ei ole suletud.\n"
-#~ "Proovige seda teha k�sitsi, k�ivitades\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "juurkasutajana."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "S�steem on n��d Internetist lahutatud."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Valige paigalduse maht"
-
-#~ msgid "Total size: "
-#~ msgstr "Suurus kokku: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Palun oodake, "
-
-#~ msgid "Total time "
-#~ msgstr "Aega kokku "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Kasutada olemasolevat X-i seadistust?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Mis porti on Teie printer �hendatud? \n"
-#~ "(paneme t�hele, et /dev/lp0 on sama mis LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Hoiatan, v�rguliides on juba seadistatud. J�rgnevalt seadistame selle "
-#~ "uuesti."
-
-#~ msgid "New"
-#~ msgstr "Uus"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Eemalda"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Palun valige partitsioon"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Mitmeselt m�istetav (%s), palun t�psustage\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (vaikimisi %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Teie valik? (vaikimisi %s, `none' - ei midagi)"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "ei saa lugeda faili /etc/sysconfig/autologin: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Kas soovite v�rgu�hendust taask�ivitada?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Kas olete n�us?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "N��d taask�ivitan v�rguliidese:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Kas olete valmis v�rguliidese %s taask�ivitamiseks?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Tavaline valik on \"/dev/hda\" (esimese IDE kanali master), kui Te ei\n"
-#~ "tea t�pselt, et tahate teisiti teha."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "�henduse t��p: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Valige uus vaikimisi kasutaja :"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Palun testige hiirt"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Valige keel s�steemi installimiseks ja kasutamiseks."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Et installimist j�tkata, peate n�ustuma �laltoodud "
-#~ "litsentsitingimustega.\n"
-#~ "\n"
-#~ "\n"
-#~ "Palun valige \"N�us\", kui n�ustute nendega.\n"
-#~ "\n"
-#~ "\n"
-#~ "Palun valige \"Keeldun\", kui ei pea neile tingimistele allumist "
-#~ "v�imalikuks. Installimine l�petatakse, tegemata Teie s�steemis muutusi."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Valige klaviatuuripaigutus �laltoodud nimekirjast"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Kui soovite, et peale installimist oleks v�imalik kasutada veel "
-#~ "erinevaid\n"
-#~ "keeli, valige need �laltoodud nimekirjast. Valik \"K�ik\" lisab toe\n"
-#~ "k�igile keeltele."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Valige:\n"
-#~ "\n"
-#~ "  - Isetehtud: Olete Linuxiga tuttav ja soovite s�steemi kohandada "
-#~ "vastavalt\n"
-#~ "   Teie vajadustele. J�rgmisena saate teha valikud s�ltuvalt Teie "
-#~ "arvuti \n"
-#~ "   edaspidisest kasutusalast.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-#~ "   s�steemi, mis sobiks nagu valatult Teie t�psete ootustega.\n"
-#~ "   Aga palun, palun: �RGE VALIGE SEDA, KUI TE T�PSELT EI TEA, MIDA TEETE!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "N��d m��rake oma arvuti peamne kasutusala. Valikud on:\n"
-#~ "\n"
-#~ "* T��jaam: valige, kui kavatsete oma arvutit rakendada igap�evategemiste "
-#~ "tarvis (kontorirakendused,\n"
-#~ "  graafika ja muu selline).\n"
-#~ "\n"
-#~ "\n"
-#~ "* Arendus: installitakse t�iskomplekt vahendeid eri programmeerimiskeelte "
-#~ "kasutamiseks, allikkoodi loomiseks,\n"
-#~ "  kompileerimiseks, silumiseks jne.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: valige see, kui vajate Mandrake Linux serverit. Saate "
-#~ "serveerida faile (NFS v�i SMB), printida\n"
-#~ "  (Unixi stiilis lp v�i Windowsi SMB), lisaks andmebaasid, "
-#~ "veebirakendused jms. Installimata\n"
-#~ "  j�etakse graafiline kasutajaliides (KDE, GNOME...)."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "N��d v�ite valida paketigruppe installimiseks v�i uuendamiseks\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX kontrollib, kas Teil on ikka piisavalt vaba ruumi nende k�igi "
-#~ "jaoks.\n"
-#~ "kui mitte, hoiatab ta Teid. Kui Te hoiatusest ei hooli j�etakse "
-#~ "automaatselt\n"
-#~ "k�rvale v�hemolulised paketid.\n"
-#~ "Nimekirja l�pus saate valida \"Valik paketthaaval\"; sel juhul aga peate\n"
-#~ "l�bi sirvima �le 1000 �ksiku paketi..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "N��d saate pakette �kshaaval installimiseks valida\n"
-#~ "\n"
-#~ "\n"
-#~ "Paketipuud saate avada ja sulgeda vasakpoolses nurgas asuvatest nuppudest."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Kui Teil on olemas k�ik �laltoodud CD-d, klikkige <OK>.\n"
-#~ "Kui Teil ei ole �htki neist, klikkige <Katkesta>.\n"
-#~ "Kui puuduvad m�ned CD-d, j�tke m�rgituks vaid olemasolevad ja siis <OK>."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Kui soovite oma arvuti �hendada Internetti v�i kohtv�rku, tehke palun\n"
-#~ "�ige valik. V�lise seadme korrektseks tuvastamiseks on vajalik, et see "
-#~ "oleks\n"
-#~ "sisse l�litatud ja arvutiga �hendatud\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Te ei soovi v�rgu�hendust kasutada, valige \"Keela v�rgu�hendus\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite v�rgu�henduse seadistada hiljem, valige \"Tehtud\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Modemit ei leitud. Palun valige seerialport, kuhu see on �hendatud.\n"
-#~ "\n"
-#~ "\n"
-#~ "Igaks juhuks: esimese seerialpordi (\"COM1\" Microsoft Windowsis) nimi\n"
-#~ "on GNU/Linux s�steemis \"ttyS0\"."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Sisestage sissehelistamiskeskuse andmed. Kui Te neid ei tea\n"
-#~ "v�i kahtlete, saate oma teenusepakkujalt (ISP-l) kindlasti abi.\n"
-#~ "N�iteks info nimeserveri (DNS) kohta saab tavaliselt �henduse\n"
-#~ "loomise ajal automaatselt"
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Kui Teil on v�line modem, siis l�litage see palun n��d sisse, et DrakX "
-#~ "saaks seda tuvastada."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Palun l�litage modem sisse ja valige nimekirjast �ige."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Kui Te ei ole kindlad, et �laltoodud informatsioon vastab t�ele\n"
-#~ "v�i Te ei tea, mida sisestada, k�sige abi oma internetiteenuse pakkujalt\n"
-#~ "(ISP-lt). N�iteks info nimeserveri (DNS) kohta saab tavaliselt �henduse\n"
-#~ "loomise ajal automaatselt"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "N��d sisestage oma arvuti nimi, kui see on vajalik. Kui kahtlete, siis "
-#~ "peaksite k�sima lisainformatsiooni oma ISP k�est."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "V�rguliidese seadistamiseks on vajalik:\n"
-#~ "\n"
-#~ "   * IP-aadress: kui Te seda ei teha, k�sige oma v�rguhaldurilt v�i\n"
-#~ "internetiteenuse pakkujalt (ISP).\n"
-#~ "\n"
-#~ "   * V�rgumask: \"255.255.255.0\" on tavaliselt sobiv. Igaks juhuks "
-#~ "v�ite\n"
-#~ "v�rguhalduri v�i ISP k�est �le k�sida.\n"
-#~ "\n"
-#~ "   * Automaatne IP: Kui Teie v�rgus on kasutusel BOOTP v�i DHCP.\n"
-#~ "Selle valimisel ei pea v�lja \"IP-aadress\" t�itma. Kui kahtlete\n"
-#~ "k�sige j�llegi oma v�rguhaldurilt v�i ISP-lt."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Kui Teie v�rgus on kasutusel NIS, valige \"Kasuta NIS-i\". Kahtluse "
-#~ "korral\n"
-#~ "k�sige v�rguhaldurilt."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Kui vaja, sisestage oma s�steemi nimi. Kui Teil ei\n"
-#~ "ole �htki head m�tet, j�tke see rida t�hjaks"
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "N��d sisestage oma sissehelistamisteenuse pakkuja andmed. Kui ei ole "
-#~ "kindel,\n"
-#~ "mida kuhu sisestada, k�sige oma ISP k�est �le."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Kui peate kasutama vahendajaid (tulem��ri vms), seadistage need n��d. "
-#~ "Kui\n"
-#~ "kahtlete, on abiks v�rguhaldur v�i ISP"
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Kr�ptopakette saate installida p�rast Interneti�henduse seadistamist.\n"
-#~ "Esmalt valige peegel, kust soovite pakette alla laadida ja seej�rel\n"
-#~ "valige paketid.\n"
-#~ "\n"
-#~ "\n"
-#~ "M�rkus: kr�ptopakettide valimisel peate arvesse v�tma ka v�imalikke\n"
-#~ "�iguslikke piiranguid oma asukohamaal."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "N��d saate valida ajav��tme vastavalt oma asukohale."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Teil on v�imalus seadistada kas kohalik (Teie arvutiga �hendatud) v�i\n"
-#~ "v�rguprinter (Unix, Netware v�i Microsoft Windows v�rgus)"
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Kui soovite vahetevahel printida, valige palun selleks sobiv meetod, "
-#~ "CUPS\n"
-#~ "v�i LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS on uus, v�imas ja paindlik printimiss�steem Unix keskkonnas (CUPS -\n"
-#~ "Common Unix Printing System). Mandrake Linux kasutab vaikimisi seda.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR on vanem meetod, mis oli kasutusel ka eelmistest Mandrake Linux\n"
-#~ "distributsioonides.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Teil ei olegi printerit, valige \"Ei soovi\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux oskab toimetada mitut t��pi printeritega. Iga�ht neist "
-#~ "seadistatakse\n"
-#~ "erinevalt.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Teie printer on f��siliselt arvutiga �hendatud, valige \"Kohalik "
-#~ "printer\"\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada v�rguprinterit Unix serveril, valige \"V�rguprinter"
-#~ "\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada v�rguprinteri Windows serveril (v�i muidu �le SMB\n"
-#~ "protokolli), valige  \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Palun l�litage oma printer sisse ja laske DrakX-il seda tuvastade.\n"
-#~ "\n"
-#~ "Samuti on vaja sisestada lisainformatsiooni:\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printeri nimi: spuuler kasutab vaikimisi printerit \"lp\". Seega "
-#~ "peab Teil olema v�hemalt �he printeri nimi \"lp\".\n"
-#~ "     Kui Teil ongi ainult �ks printer, saate sellele anda ka mitu nime. "
-#~ "Nimed peavad olema eraldatud s�mboliga \"|\"\n"
-#~ "     Seega, kui soovite, et nimel oleks ka mingi t�hendus, kirjutage "
-#~ "nimeks midagi niisugust: \"Minu printer|lp\".\n"
-#~ "     Printer, mille nimede hulgas on \"lp\", saab olema Teie s�steemi "
-#~ "jaoks vaikimisi printeriks.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Kirjeldus: see ei ole kohustuslik, kuid v�ib osutuda vajalikuks, kui "
-#~ "Teil on n�iteks mitu kohalikku printerit ja soovite neid v�rgus v�lja "
-#~ "jagada\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Asukoht: kui soovite anda t�iendavat informatsiooni printeri "
-#~ "asukohast\n"
-#~ "    N�iteks: \"Teise korruse keskel\".\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "N��d on vaja lisainformatsiooni.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printeri nimi: spuuler kasutab vaikimisi printerit \"lp\". Seega "
-#~ "peab Teil olema v�hemalt �he printeri nimi \"lp\".\n"
-#~ "     Kui Teil ongi ainult �ks printer, saate sellele anda ka mitu nime. "
-#~ "Nimed peavad olema eraldatud s�mboliga \"|\"\n"
-#~ "     Seega, kui soovite, et nimel oleks ka mingi t�hendus, kirjutage "
-#~ "nimeks midagi niisugust: \"Minu printer|lp\".\n"
-#~ "     Printer, mille nimede hulgas on \"lp\", saab olema Teie s�steemi "
-#~ "jaoks vaikimisi printeriks.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Spuulkataloog: kataloog, kus spuuler hoiab ajutisi faile enne "
-#~ "printimist. Seda ei ole soovitav muuta.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Printeri �hendusviis: Kui Teie printer on f��siliselt Teie arvuti "
-#~ "k�ljes, valige \"Kohalik printer\".\n"
-#~ "    Kui soovite kasutada printerit UNIX serveri k�ljes, valige \"lpd "
-#~ "printserver\".\n"
-#~ "\n"
-#~ "\n"
-#~ "   Kui soovite kasutada printerit Microsoft Windows v�rgus (v�i SMB "
-#~ "serveril) valige \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "   Kui soovite kasutada NetWare serveril asuvat printerit, valige "
-#~ "\"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Teie printerit ei �nnestunud tuvastada. Palun abistavat infot v�imaliku\n"
-#~ "�henduspistiku kohta.\n"
-#~ "\n"
-#~ "\n"
-#~ "Enamasti on printer �hendatud esimesse paralleelporti. GNU/Linuxis on "
-#~ "selle\n"
-#~ "nimeks \"/dev/lp0\" ja Microsoft Windowsis \"LPT1\"."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Valige printer �laltoodud nimekirjast."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Palun valige oma printerile sobivad s�tted.\n"
-#~ "Abi saate ilmselt ka printeri dokumentatsioonist.\n"
-#~ "\n"
-#~ "\n"
-#~ "J�rgmisel sammul saate oma seadistusi testida ja soovi korral muuta, kui "
-#~ "midagi ei t��ta nagu vaja."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "N��d peate sisestama s�steemi juurkasutaja (root) parooli. Et v�hendada\n"
-#~ "eksimisv�imalust, tehke seda kaks korda.\n"
-#~ "\n"
-#~ "\n"
-#~ "Juurkasutaja on s�steemi t�htsaim kasutaja ja ainuke, kes tohib teha\n"
-#~ "muudatusi s�steemi s�tetesse. Seep�rast valige juurkasutaja parooli "
-#~ "erilise\n"
-#~ "hoolega.\n"
-#~ "\n"
-#~ "Hea salas�na peaks olema kombinatsioon t�htedest ja numbritest \n"
-#~ "ning v�hemalt 8 m�rki pikk. �rge *kunagi* kirjutage oma parooli �les!\n"
-#~ "\n"
-#~ "\n"
-#~ "Samas ei peaks see olema liiga pikk ja keeruline meelde j�tmiseks."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "N��d saate luua �he v�i rohkem \"tavakasutaja\" kontot. ��rmiselt "
-#~ "soovitav\n"
-#~ "on luua igale arvuti kasutajale eraldi konto(d). Sel viisi saab iga "
-#~ "kasutaja\n"
-#~ "valida ise endale sobiva graafilise keskkonna kujunduse ja programmide "
-#~ "s�tted.\n"
-#~ "K�ik kasutaja failid saavad hoitud ja kaitstud tema isiklikus "
-#~ "kodukataloogis.\n"
-#~ "\n"
-#~ "\n"
-#~ "Esmalt looge konto iseendale, ka siis kui olete s�steemi ainuke "
-#~ "kasutaja.\n"
-#~ "�rge tehke oma igap�evatoimetusi juurkasutajana, suurendades sel viisil\n"
-#~ "turvariski! Vale juurkasutaja n�puliigutus v�ib s�steemi kergesti\n"
-#~ "kasutusk�lbmatuks muuta!\n"
-#~ "\n"
-#~ "\n"
-#~ "Juurkasutaja �igused on ainult administreerimiseks ja hoolduseks,\n"
-#~ "k�ike muud tehke palun tavakasutajana"
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Alglaadimisketta loomine on ��rmiselt soovitatav. Kui peaks kunagi\n"
-#~ "tekkima probleeme s�steemi laadimisel, v�i alglaadmisketas olla Teie\n"
-#~ "ainuke p��setee uue installimise k�rval."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO ja grub-i peamised suvandid on:\n"
-#~ "  - Alglaadimisseade: m��ratakse k�vaketas v�i partitsioon, kus asub\n"
-#~ "alglaadimissektor. Kui Te just t�pselt ei tea, mida teete,\n"
-#~ "\"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ooteaeg alglaadimisel: m��ratakse ooteaeg sekundik�mnendikes enne\n"
-#~ "vaikimisi laadimist.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Graafikamood: m��ratakse VGA tekstmood s�steemi laadimisel. "
-#~ "V�imalikud\n"
-#~ "on j�rgmised valikud:\n"
-#~ "\n"
-#~ "    * normal: tavaline 80x25 tekstimood\n"
-#~ "\n"
-#~ "    * <number>:  numbrile vastav tekstimood.  - Puhasta /tmp "
-#~ "alglaadimisel: kui soovite kustutada s�steemi alglaadimisel,\n"
-#~ "valige see\n"
-#~ "\n"
-#~ "\n"
-#~ "  - T�psust RAM hulk kui vajalik: kahjuks ei ole �htki standardset "
-#~ "meetodit Teie\n"
-#~ "arvutis leiduva operatiivm�lu (RAM) koguse �raarvamiseks. Kui siinkohal "
-#~ "on eksimine\n"
-#~ "2 v�i 4 MB, siis ei maksa sellele v�ga t�helepanu p��rata."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO on alglaadur SPARC arhitektuurile: see v�imaldab laadida\n"
-#~ "kas GNU/Linuxi v�i m�ne muu Teie arvutis oleva operatsioonis�steemi.\n"
-#~ "Tavaliselt tuvastakse teised operatsioonis�steemid �igesti ja seadista-\n"
-#~ "takse ka alglaadur. Kui Teil aga ei ole �nne, tuleb parameetrid seada\n"
-#~ "k�sitsi. Olge sel juhul hoolas valima �iged."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO peamised suvandid on:\n"
-#~ "  - Alglaaduri paigaldus: m��ratakse k�vaketas v�i partitsioon, kus "
-#~ "soovite\n"
-#~ "hoida GNU/Linuxi laadimiseks vajalikku infot. Kui Te just t�pselt ei "
-#~ "tea,\n"
-#~ "mida teete, valige \"K�vaketta esimene sektor (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ooteaeg alglaadimisel: m��ratakse aeg sekundik�mnendikes enne "
-#~ "vaikimisi\n"
-#~ "laadimist."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "On aeg konfigureerida \"X Window System\" ehk lihtsalt X. X on\n"
-#~ "GNU/Linuxi graafilise kasutajaliidese s�da. Sel eesm�rgil peame koos\n"
-#~ "seadistama Teie graafikakaardi ja monitori. Enamus sellest protsessist\n"
-#~ "on automatiseeritud ja Teie �lesandeks on ainult DrakX-i\n"
-#~ "valikutega n�ustuda (v�i mitte :))\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui saame seadistamisega hakkama, k�ivitakse X (kui Te ei anna\n"
-#~ "eraldi k�sku mitte nii teha)."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Kui midagi on X-i seadistustega valesti, saab siinkohal v�imalikke vigu\n"
-#~ "parandada."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Kui eelistate graafilist s�steemi sisenemist, valige \"Jah\". "
-#~ "Konsoolimoodi\n"
-#~ "eelistamisel valige \"Ei\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "N��d saate valida oma s�steemis kasutatava turvataseme. Palun vaadake "
-#~ "lisainfot selle kohta ka\n"
-#~ " kasutajajuhendist. �ldiselt, kui Te ei tea, mida teete, j�tke siia "
-#~ "vaikimisi valik.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Teie s�steem sooritab alglaadimise.\n"
-#~ "\n"
-#~ "Taask�ivitumisel laaditakse Teie uus Mandrake Linux s�steem "
-#~ "automaatselt.\n"
-#~ "Kui soovite laadida m�nd muud operatsioonis�steemi, lugege palun\n"
-#~ "lisainformatsiooni."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "T�ehhi (programmeerijad)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovaki (programmeerijad)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Loodava profiili nimi:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Kirjuta /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Vorminda k�ik"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "P�rast k�igi partitsioonide vormindamist"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "on k�ik andmed neil partitsioonidel h�vivad"
-
-#~ msgid "Reload"
-#~ msgstr "Laadi uuesti"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Kas soovite luua kiirpaigaldusflopi (abiks korduval paigaldusel)?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL s�tted"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Kui v�rgus on CUPS server, siis ei ole Teil vaja siin\n"
-#~ "printereid seadistada, need leitakse automaatselt.\n"
-#~ "Kui server asub kuskil kaugemal, peate sisestama CUPS serveri\n"
-#~ "IP-aadress ning soovitavalt ka pordi numbri."
-
-#~ msgid "Remote queue"
-#~ msgstr "Prindij�rjekorra nimi"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Prindij�rjekorra nimi"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Domeeninimi"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Printerit ei ole"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "V�rgus�tted"
-
-#~ msgid "Profile "
-#~ msgstr "Profiil "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "�henduse t��p: "
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Loo interneti�hendus"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Katkesta interneti�hendus"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Katkesta interneti�hendus"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Katkesta interneti�hendus"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "�henduse nimi"
-
-#, fuzzy
-#~ msgid "average"
-#~ msgstr "r�mps"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Vaikimisi"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "S�tete fail ei ole arusaadav."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Tundmatu s�ttefaili"
-
-#~ msgid "Adapter"
-#~ msgstr "V�rgukaart"
-
-#~ msgid "Disable network"
-#~ msgstr "Keela v�rgu�hendus"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Keela v�rgu�hendus"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "N��d saate oma hiirt testida. Kasutage nii nuppe kui ratast. Kui tundub\n"
-#~ "midagi valesti olevat, klikkige <Katkesta> uue juhtprogrammi valimiseks."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (v�i ADSL) �hendus"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Hiir"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "V�ite anda ette ka URI, mille j�rgi CUPS printeri leiab."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Jah, tr�ki ASCII testlehek�lg"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Jah, tr�ki PostSript testlehek�lg"
-
-#~ msgid "Paper Size"
-#~ msgstr "Paberi suurus"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "T�� l�petamisel v�ljasta kogu leht?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Kas optimiseerime k�vaketast?"
-
-#~ msgid "Color depth options"
-#~ msgstr "Mooduli parameetrid:"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Tr�kkida tekst PostScriptina?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Paranda trepitud tekst?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Lehek�lgi �hel paberil"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Lehe laiuse m�rgid punktides (1/72 tollile)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Lehe k�rguse m�rgid punktides (1/72 tollile)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Lisa GhostScript parameetrid"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Lisa teksti parameetrid"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Viimane leht enne"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Vali v�rguprinteri �hendusviis"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Masinal v�ib olla mitu printerit, millest iga�ks vajab nime\n"
-#~ "(sageli lp) ja printkataloogi. Millist nime peaks kasutama\n"
-#~ "kasutama selle printeri puhul ja kuidas see on �hendatud?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Masinal v�ib olla mitu prindij�rjekorda, millest iga�ks vajab nime\n"
-#~ "(sageli lp) ja spuulkataloogi (ajutiste failide jaoks). Millist nime\n"
-#~ "ja kataloogi peaks kasutama selle printeri puhul ja kuidas see on "
-#~ "�hendatud?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Printeri nimi"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spuulkataloog"
-
-#~ msgid "Disable"
-#~ msgstr "Keela"
-
-#~ msgid "Enable"
-#~ msgstr "Luba"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "LAN s�tted"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Teenusepakkuja DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Teenuspakkuja DNS 2"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "�hendamine eba�nnestus: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Turvalisema s�steemi saamiseks peaksite valima \"Kasuta varjutatud \n"
-#~ "paroolifaili\" ja \"Kasuta parooli kaitsmiseks MD5 algoritmi\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Kui Teie v�rgus on kasutusel NIS, valige \"Kasuta NIS-i\". Kahtluse "
-#~ "korral\n"
-#~ "k�sige v�rguhaldurilt."
-
-#~ msgid "yellow pages"
-#~ msgstr "NIS YP"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Kuidas soovite luua interneti�hendust?"
-
-#~ msgid "Configure..."
-#~ msgstr "Seadista..."
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Valitud suurus %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Testime Teie �hendust..."
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Seadistused: Lisa asukoht"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "See skript proovib seadistada USB hiirt"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Alglaadimise stiil"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "N��d on interneti�hendus seadistatud aga Teie arvutit\n"
-#~ "saab panna ka seda jagama teistele arvutitele kohtv�rgus.\n"
-#~ "M�rkus: kohtv�rgu jaoks on vajalik eraldi v�rgukaardi olemasolu\n"
-#~ "\n"
-#~ "Kas soovite interneti�hendust jagada?\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "Interneti�henduse jagamine"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Automaatsed s�ltuvused"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "LILO/GRUB seadistamine"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Loo alglaadimisflopi"
-
-#~ msgid "Choice"
-#~ msgstr "Valik"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horisontaalne kena aurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "vertikaalne tavaline aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "N��d saate valida mitmesuguseid s�steemi k�itumise v�imalusi.\n"
-#~ "\n"
-#~ "* Optimiseeri k�vaketast: selle variandi puhul saate kiirendada\n"
-#~ "  k�vaketta poole p��rdumist, kuid teatud vigaste emaplaatide puhul \n"
-#~ "  v�ite k�vaketta rikkuda. Valige, kui olete endas kindel.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Valige turvatase: saate valida oma s�steemi turvalisuse taseme.\n"
-#~ "  Palun vaadake manuaali, et saada turvatasemetest t�ielik �levaade.\n"
-#~ "  Kui kahtlete, valige \"Keskmine\", et saada t�esti turvalist s�steemi,\n"
-#~ "  valige \"Paranoiline\" aga olge ettevaatlik, n�iteks EI SAA SELLEL "
-#~ "TASEMEL\n"
-#~ "  JUURKASUTAJA SISSE LOGIDA! Peate kasutama k�sku 'su'. Mida "
-#~ "turvalisem, \n"
-#~ "  seda keerulisem kasutada!\n"
-#~ "\n"
-#~ "* T�psusta operatiivm�lu mahtu: v�ib esineda olukord, kus GNU/Linux ei\n"
-#~ "  ole suuteline detekteerima t�pselt operatiivm�lu suurust. Kui see on\n"
-#~ "  nii juhtunud, saate �elda ette tegeliku m�luhulga. Paneme t�hele, et\n"
-#~ "  erinevus 2-4MB tuvastatud ja tegeliku m�lu hulga vahel on normaalne.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Irdandmekandjate automaatne �hendamine (supermount): Teie flopid, CD-d\n"
-#~ "  ja Zip-kettad �hendatakse automaatselt (ilma mount/umount kasutamata)\n"
-#~ "\n"
-#~ "\n"
-#~ "* Puhasta \"/tmp\" alglaadimisel: s�steemi laadimisel kustutatakse k�ik   "
-#~ "failid \"/tmp\" kataloogist.\n"
-#~ "\n"
-#~ "* V�imalda NumLock alglaadimisel: s�steemi laadimisel muudetakse\n"
-#~ "  konsoolimoodis NumLock aktiivseks"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr "Vabandan, aga meili seadistamine ei ole praegu veel v�imalik."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "See siin on v�rgu�henduse abimees.\n"
-#~ "Mis komponente soovite seadistada?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Interneti�hendus"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Muud s�tted"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Muud k�simused"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "K�rgel turvatasemel ei saa supermount-i kasutada"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "SELLEL TURVATASEMEL EI OLE V�IMALIK S�STEEMI SISENEDA JUURKASUTAJANA!\n"
-#~ "Juurkasutaja �iguste saamiseks tuleb siseneda tavakasutajana ja siis \n"
-#~ "kasutada \"su\"-d.\n"
-#~ "Serveri puhul on selline piirang t�iesti m�istlik.\n"
-#~ "Teid on igal juhul hoiatatud."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Olge ettevaatlik, NumLock-i kasutamine v�ib p�hjustada (eriti kantavatel\n"
-#~ "arvutitel) probleeme."
-
-#~ msgid "not connected"
-#~ msgstr "ei ole �hendatud"
-
-#~ msgid "Actions"
-#~ msgstr "Tegevused"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Teadusrakendused"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Server, Faili/prindi/samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Server, DNS/DHCP"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Esimene nimeserver:"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Teine nimeserver:"
-
-#~ msgid "using module"
-#~ msgstr "kasutades moodulit"
-
-#~ msgid "Development, Database"
-#~ msgstr "Arendus, Andmebaasid"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Arendus, Graafilised keskkonnad"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Arendus, standardvahendid"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Hoiatus:\n"
-#~ "Muudatuste rakendamine v�ib X keskkonna endast v�lja viia."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "J�tkamisel olen sunnitud Teie %s keskkonna seiskama"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Millist alglaadurit soovite kasutada?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Kiirpaigaldusflopi"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Kas otsida modemit?"
-
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "Seadista ISDN �hendus"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Keela �hendus Internetti"
-
-#~ msgid "Configure local network"
-#~ msgstr "Kohtv�rgu seadistamine"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Seadista interneti�hendus / Seadista kohtv�rk"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Kohtv�rk on juba seadistatud.\n"
-#~ "Kas soovite:"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Seadistan uuesti abimehega..."
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Graafikaprogrammid"
-
-#~ msgid "Sciences"
-#~ msgstr "Teadused"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Jututamise (IRC v�i IM) programmid xchat, licq, gaim ja faili�lekande "
-#~ "vahendid"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Suhtlemisvahendid"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Interneti v�rgid"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Andmebaasiserveri ja -kliendid (mysql ja postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "C/C++ arendus"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Ajav��tme m��ramine"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Esimene v�rguliides (eth0)"
-
-#~ msgid "isdn_internal"
-#~ msgstr "isdn_internal"
-
-#~ msgid "ippp0"
-#~ msgstr "ippp0"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(v�ib tekitada andmete h�vimist)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "L�lita Num Lock k�ivitamisel sisse"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Salas�na uuesti"
-
-#~ msgid "default"
-#~ msgstr "tavaline"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Milline on Teie s�steemi kasutusala?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Valige paigalduse maht"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Kasuta diskdrake-i"
-
-#~ msgid "Customized"
-#~ msgstr "Isetehtud"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Olete ikka kindlasti ekspert? \n"
-#~ "Hei, ilma naljata, eksperdi valikud on laiemad kuid sellev�rra "
-#~ "ohtlikumad.\n"
-#~ "\n"
-#~ "Teilt k�sitakse k�simusi n�iteks 'paroolifaili varjutamise' jms kohta,\n"
-#~ "olete Te selleks valmis?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Kasuta varjutatud paroolifaili"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Kasuta parooli kaitsmiseks MD5 algoritmi"
-
-#~ msgid "Search"
-#~ msgstr "Otsi"
-
-#~ msgid "Package"
-#~ msgstr "Pakett"
-
-#~ msgid "Tree"
-#~ msgstr "Puu"
-
-#~ msgid "Sort by"
-#~ msgstr "Sortimine"
-
-#~ msgid "Category"
-#~ msgstr "Kategoori"
-
-#~ msgid "Installed packages"
-#~ msgstr "Installitud paketid"
-
-#~ msgid "Available packages"
-#~ msgstr "K�ttesaadavad paketid"
-
-#~ msgid "Show only leaves"
-#~ msgstr "N�ita ainult �ksikuid"
-
-#~ msgid "Expand all"
-#~ msgstr "Ava k�ik"
-
-#~ msgid "Collapse all"
-#~ msgstr "Sule k�ik"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Lisa pakettide asukoht"
-
-#~ msgid "Update location"
-#~ msgstr "Uuenda asukoht"
-
-#~ msgid "Find Package"
-#~ msgstr "Leia pakett"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Leia pakett faili j�rgi"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Installitud/Saadaval"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Kontrollin s�ltuvusi"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Eemaldatakse j�rgmised paketid"
-
-#~ msgid "Regexp"
-#~ msgstr "Regulaaravaldis"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Milline pakett vajab ressurssi"
-
-#~ msgid "No match"
-#~ msgstr "Ei leitud sobivat"
-
-#~ msgid "No more match"
-#~ msgstr "Ei leitud enam sobivaid"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake on hetkel \"s��sturesiimil\".\n"
-#~ "Failide otsimiseks k�ivitan rpmdrake uuesti"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Millist faili Te otsite?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Mida Te otsite?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Andke nimi (nagu: 'extra, 'commercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Kataloog"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "CD-d ei leitud (v�hemalt mitte /mnt/cdrom all)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL kataloogile, kus paiknevad RPM-id"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "FTP ja HTTP jaoks on vaja ka hdlist-i asukohta\n"
-#~ "See peab olema antud eelmise URLi suhtes"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Palun j�rgmist informatsiooni"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s on juba kasutusel"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Uuendan RPM andmebaasi"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Eemaldan kirje %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Leian �lej��gid"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "�lej��kide leidmine v�tab veidi aega"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Leitud ISDN kaart:\n"
-
-#~ msgid "Other countries"
-#~ msgstr "Muud maad"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "Millisel maal Te praegu olete ?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel modem"
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI modem"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "Kui teil on Alcatel-i modem, valige Alcatel. Muidu aga ECI"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "�ra kasuta pppoe-d"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (t�htis)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (v�ga kena)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (kena)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Millisesse seerialporti on Teie hiir �hendatud?"
-
-#~ msgid "Czech"
-#~ msgstr "T�ehhi"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovaki"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Ei saa installida 'ipchains' paketti urpmi abil."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Ei saa installida DHCP paketti urpmi abil."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Ei saa installida linuxconf-i urpmi abil."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Ei saa installida 'bind' paketti urpmi abil."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "Ei saa installida nimeserveri vahendajat urpmi abil."
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Seadista kohtv�rk uuesti"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Teie arvutit saab seadistada interneti�henduse jagajana.\n"
-#~ "\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "K�ik sai seadistatud.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Kasuta Interneti jaoks tavamodemit"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Kasuta Interneti jaoks ISDN modemit"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Kasuta Interneti jaoks DSL (v�i ADSL) modemit"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Kasuta Interneti jaoks DOC kaablimodemit"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "Mittekasutamise aeg, mille jooksul �hendus\n"
-#~ "katkestatakse. (vaikimisi ei katkestata)"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Saksa (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Mida Te soovite teha?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Installi/Taasta"
-
-#~ msgid "Rescue"
-#~ msgstr "Taasta"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Mis t��pi partitsiooni soovite?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Valige \"Installimine\" kui varem sellele masinale GNU/Linuxit ei ole "
-#~ "pandud\n"
-#~ "v�i soovite kasutada mitut distributsiooni\n"
-#~ "\n"
-#~ "Valige \"Taastamine\" kui soovite taastada m�nd eelmist Mandrake "
-#~ "Linuxit:\n"
-#~ "%s v�i %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Valige:\n"
-#~ "\n"
-#~ "  - Soovitatav: Te pole kunagi varem GNU/Linuxit installinud. \n"
-#~ "\n"
-#~ "  - Isetehtud: Olete Linuxiga tuttav ja soovite s�steemi kohandada "
-#~ "vastavalt\n"
-#~ "    Teie vajadustele. J�rgmisena saate teha valikud s�ltuvalt Teie "
-#~ "arvuti\n"
-#~ "    edaspidisest kasutusalast.\n"
-#~ "\n"
-#~ "  - Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-#~ "    s�steemi, mis sobiks nagu valatult Teie t�psete ootustega.\n"
-#~ "    Aga palun, palun: �RGE VALIGE SEDA, KUI TE T�PSELT EI TEA, MIDA "
-#~ "TEETE!\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "SEAL\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "N��d peaksite valima partitsioon(id) Mandrake Linux installimiseks\n"
-#~ "kui need on juba varem kettale defineeritud. Kui Te varem ei ole oma\n"
-#~ "k�vaketast Linuxi jaoks partitsioneerinud, saate seda j�rgmises etapis\n"
-#~ "teha. Partitsioneerimine t�hendab f��silise ketta jaotamist loogiliselt\n"
-#~ "eraldatud osadeks.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui ei tunne ennast sel alal kindlalt, valige \"Paiguta ise\", et\n"
-#~ "automaatselt luua Linuxile vajalikud partitsioonid.\n"
-#~ "Linuxi maailmas t�hendab \"hda\" esimest, \"hdb\" teist IDE k�vaketast,\n"
-#~ "\"sda\" esimest. \"sdb\" teist SCSI k�vaketast jne. Partitsioneerimiseks\n"
-#~ "valige kettaseade lihtsalt sellel klikkides.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kaks tavalist partitsiooni on juurpartitsioon (/), kus asub "
-#~ "failis�steemi\n"
-#~ "hierarhia algus ja /boot, mis sisaldab arvuti alglaadimiseks vajalikke "
-#~ "faile, sealhulgas Linuxi kernelit.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kuna partitsioneerimine ei ole p��ratav protsess, v�ib see tekitada\n"
-#~ "algajas kerget k�hedust. DiskDrake on selle teinud k�ll lihtsamaks,\n"
-#~ "aga kindlasti tuleks enne iga liigutust s�gavalt j�rele m�telda ja\n"
-#~ "soovitavalt ka dokumentatsiooniga tutvuda.\n"
-#~ "\n"
-#~ "K�iki tegevusi saate teha ka ainult klaviatuuri kasutades: liikuge\n"
-#~ "partitsioonidel <TAB> ja �les-alla noolte abil. Partitsiooni valikul\n"
-#~ "\n"
-#~ "- Ctrl-C  loob uue partitsiooni (valige selleks vaba kettaala)\n"
-#~ "- Ctrl-D  kustutab partitsiooni\n"
-#~ "\n"
-#~ "- Ctrl-M  seab �henduspunkti\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "K�ik Teie poolt v�rskelt loodud partitsioonid tuleb kasutamiseks "
-#~ "vormindada\n"
-#~ "(luua failis�steemid). Partitsiooni vormindamisel h�vitatakse k�ik "
-#~ "andmed,\n"
-#~ "mis seal iganes leiduvad. Pange t�hele, et varem vormindatud ja "
-#~ "vajalikke\n"
-#~ "andmeid sisaldavaid partitsioone, t��piliselt /home ja /usr/local, ei "
-#~ "ole\n"
-#~ "m�istlik �le vormindada, vaid need v�ib j�tta nii nagu on."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "N��d hakkan Teie valitud pakette installima. Selleks peaks kuluma\n"
-#~ "m�nik�mmend minutit. S�steemi uuendamisel kulub aega k�ll veidi rohkem,\n"
-#~ "sest siis tuleb enne olemasolevaid pakette anal��sida."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Kui DrakX ei suutnud Teie hiirt tuvastada, v�i soovite vaadata, mida\n"
-#~ "leiti, kuvatakse Teile �lalpool \"hiiret�ugude\" nimekiri.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui olete valikuga n�us, minge lihtsalt vasakpoolses men��s edasi.\n"
-#~ "Vastasel juhul valige hiire t��p, mis Teie arvates k�ige paremini Teie\n"
-#~ "hiirt iseloomustab\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui tegemist on seerialpordi hiirega, peate �tlema ka, mis porti ta on\n"
-#~ "�hendatud."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "See sektsioon on p�hendatud kohtv�rgu (LAN) v�i sissehelistamisteenuse\n"
-#~ "(DialUp) s�tete paikapanemisele.\n"
-#~ "\n"
-#~ "Kui vastate \"LAN\", siis proovitakse Teie arvutist leida v�rgukaarti.\n"
-#~ "Kui Teie v�rgukaart t��tab PCI siinil, peaks ta olema leitav ja "
-#~ "kasutatav\n"
-#~ "automaatselt. ISA kaardi puhul, v�ib automaatne otsing alt vedada ja Te\n"
-#~ "peate juhtprogrammi ise nimekirjast valima.\n"
-#~ "\n"
-#~ "\n"
-#~ "SCSI kaartide puhul peab juhtprogramm esmalt leidma SCSI liidese, "
-#~ "vastasel\n"
-#~ "juhul peate p��rduma kaardi m��ja poole.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui installite Mandrake Linux s�steemi masinale, mis on osake juba "
-#~ "t��tavast\n"
-#~ "kohtv�rgust, annab v�rgu haldaja Teile kogu vajaliku informatsiooni (IP-\n"
-#~ "aadressi, alamv�rgu maski ja masina nime). Kui seate �les oma privaatset\n"
-#~ "v�rku, peaksite ise valima aadressid \n"
-#~ "\n"
-#~ "Kui soovite Internetti kasutada modemi ja sissehelistamisteenuse kaudu,\n"
-#~ "valige \"DialUp\" ja DrakX proovib otsida Teie arvutist modemit. Kui\n"
-#~ "modemit ei leita, peate sisestama seerialpordi, kuhu kavatsete modemi\n"
-#~ "�hendada."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linuxi all saate kasutada mitmesuguseid printereid. Iga�ks neist n�uab\n"
-#~ "erinevaid s�tteid t��tamiseks. Siiski tasub t�hele panna, et s�steem\n"
-#~ "kasutab nime 'lp' vaikimisi printeri jaoks; seega peab Teil �ks \n"
-#~ "selliselt t�histatud, kuigi printeri(te)le v�ib panna '|' m�rgiga "
-#~ "eraldatult\n"
-#~ "mitu nime. Kui eelistate \"t�hendusega\" nimesid, pange nimeks\n"
-#~ "n�iteks \"Minu printer|lp\" ja see saab olema Teie vaikimisi printer.\n"
-#~ "\n"
-#~ "Kui Teie printer on otse arvuti k�lge �hendatud, valige \"Kohalik printer"
-#~ "\".\n"
-#~ "Siis saate valida pordi kuhu see on �hendatud ja printerile vastava "
-#~ "filtri.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada printerit, mis on �hendatud Un*x serveriga, peate\n"
-#~ "Valima \"lpd v�rguprinter\". Niisugusel juhul ei vaja Te kasutajatunnust\n"
-#~ "ega salas�na, vaid ainult serveri nime ja printimisj�rje nime serveril.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada SMB printserverit (st. printerit, mida jagab v�lja\n"
-#~ "Windows 9x/NT, peate �ra n�itama serveri SMB nime (mis ei pea olema sama\n"
-#~ "TCP/IP nimega) ja kindluse m�ttes ka IP-aadressi. Loomulikult on vaja "
-#~ "teada\n"
-#~ "ka serveri poolt jagatava printeri nime ning kasutajatunnust, salas�na "
-#~ "ja\n"
-#~ "t��grupi nime. Sama, v�lja arvatud t��grupp, on vaja teada ka NetWare\n"
-#~ "printserveri kasutamise korral."
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "On ��rmiselt soovitatav vastata siin \"Jah\"! N�iteks, kui installite\n"
-#~ "samasse masinasse hiljem MS Windowsi, kirjutab see �le bootsektori.\n"
-#~ "Ilma alglaadimisflopita ei ole Teil siis enam v�imalik GNU/Linuxit\n"
-#~ "laadida."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Liigutage ratast!"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Muutusi ei teinudki?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Mis t��pi hiirt kasutate?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "V�ljapakutavad kuvatihedused"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Et leida v�imalikke kuvatihedusi, testin erinevaid variante.\n"
-#~ "Ekraan Teie ees hakkab vilkuma...\n"
-#~ "Kui soovite, l�litage monitor v�lja. Kui valmis saan, kostab piiks"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Me v�ime proovida leida kuvatihedust, n�iteks 800x600.\n"
-#~ "Siiski, vahel ajab see arvuti segadusse.\n"
-#~ "Soovite proovida?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Sobivat olekut ei leitud\n"
-#~ "Proovige palun muud graafikakaarti v�i monitori"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Automaatne kuvatiheduste otsing"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB hiir"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB hiir (2 nuppu)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB hiir (3+ nuppu)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB hiir"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB hiir (2 nuppu)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB hiir (3+ nuppu)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus hiir"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus hiir"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus hiir"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB hiir (3 v�i enam nuppu)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A v�i k�rgem (seerial)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (seerial)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (seerial)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (seerial)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Lihtsalt hiir (seerial)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsofti �hilduv (seerial)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Lihtsalt 3-nupuline hiir (seerial)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (seerial)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr "Interneti�henduse jaoks on vaja seadistada v�rguliides."
-
-#~ msgid ""
-#~ "Please choose which network adapter do you want to use to connect to "
-#~ "internet.\n"
-#~ "If you don't know, choose eth0.\n"
-#~ msgstr ""
-#~ "Palun valige millist v�rguliidest soovite kasutada kohtv�rgu\n"
-#~ "jaoks.\n"
-#~ "Kui Te ei tea, valige eth0.\n"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "NFS �hendamine eba�nnestus"
-
-#~ msgid "Socket"
-#~ msgstr "Pistik"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX saab luua s�ttefailid nii XFree 3.3 kui ka XFree 4.0. \n"
-#~ "Vaikimisi kasutatakse 4.0, kui see toetab Teie riistvara\n"
-#~ "\n"
-#~ "Kas soovite j��da XFree versiooni 3.3 juurde?"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Kr�pto"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Seadista X"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "Ei seadista v�rku"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Kas soovite kasutada kohtv�rku?"
-
-#~ msgid "Show less"
-#~ msgstr "N�ita v�hem"
-
-#~ msgid "Show more"
-#~ msgstr "N�ita rohkem"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "Kasuta kogu ketast"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "Kohalik printer"
-
-#~ msgid "URI for Network printer"
-#~ msgstr "V�rguliides"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "Otse �hendatud printer"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(nte that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "Mis porti on Teie printer �hendatud? \n"
-#~ "(paneme t�hele, et /dev/lp0 on sama mis LPT1:)?"
-
-#~ msgid "tie"
-#~ msgstr "pintsaklips"
-
-#~ msgid "brunette"
-#~ msgstr "br�nett"
-
-#~ msgid "girl"
-#~ msgstr "neiu"
-
-#~ msgid "woman-blond"
-#~ msgstr "blondiin"
-
-#~ msgid "automagic"
-#~ msgstr "automaagiline"
-
-#~ msgid "Have you been provided with a hostname?"
-#~ msgstr "Anti Teile masinanimi"
-
-#~ msgid "Local Area Network specification"
-#~ msgstr "Kohtv�rgu seaded"
-
-#~ msgid "You may now decide which class C network to use.\n"
-#~ msgstr "Millist C-klassi v�rku soovite kasutada.\n"
-
-#~ msgid "Internet Connection Sharing - setup of %s"
-#~ msgstr "Interneti�henduse jagamine - liides %s"
-
-#~ msgid ""
-#~ "The following interface is about to be configured:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Seatakse s�tted j�rgmisele v�rguliidesele:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-
-#
-#~ msgid "Everything configured!"
-#~ msgstr "K�ik seadistatud!"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Milline on Teie klaviatuuriasetus"
-
-#~ msgid ""
-#~ "\n"
-#~ "I recommend that you abort, and then launch this internet wizard after "
-#~ "installation.It will then be able to setup ISA or PCMCIA cards easier.\n"
-#~ "\n"
-#~ "But, if you know the irq, dma, io of your card, you can still configure "
-#~ "your card."
-#~ msgstr ""
-#~ "\n"
-#~ "Soovitan teil praegu katkestada ja k�ivitada v�rgu�henduse abimees p�rast "
-#~ "installimist uuesti. Siis on v�imalik Teie ISA v�i PCMCIA kaarte lihtsam\n"
-#~ "seadistada\n"
-#~ "Muidugi, kui teil on teada oma kaardi IRQ, DMA ja IO, ei ole probleemi."
-
-#~ msgid "pptp alcatel"
-#~ msgstr "Paiguta ise"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Kas otsida PCMCIA kaarte?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Kas otsida %s seadmeid?"
-
-#~ msgid "Small(%dMB)"
-#~ msgstr "V�ike (%d MB)"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Kas soovite kasutada DialUp �hendust modemi kaudu?"
-
-#~ msgid "Do you want to configure a ISDN connection for your system?"
-#~ msgstr "Kas soovite kasutada ISDN �hendust?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Kas otsida PCI seadmeid?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Otsin juurpartitsiooni.."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: See ei ole juurpartitsioon, palun valige m�ni muu."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Millist partitsiooni soovite kasutada juurkataloogi jaoks?"
-
-#~ msgid "Autologin at startup"
-#~ msgstr "X stardib n��d"
-
-#~ msgid "Autologin - Choose default user"
-#~ msgstr "Valige uus suurus"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "Teil ei ole �htki Windowsi partitsiooni!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Teil ei ole piisavalt ruumi Lnx4win jaoks"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Tere tulemast! Laadimisel aitab Teid LILO!\n"
-#~ "\n"
-#~ "Valikud kuvab <Tab>.\n"
-#~ "\n"
-#~ "Valimiseks sisestage eelistatava nimi ja vajutage <Enter>\n"
-#~ "vaikimisi oodake %d sekundit.\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Tere tulemast! Laadimisel aitab Teid SILO!\n"
-#~ "\n"
-#~ "Valikud kuvab <Tab>.\n"
-#~ "\n"
-#~ "Valimiseks sisestage eelistatava nimi ja vajutage <Enter>\n"
-#~ "vaikimisi oodake %d sekundit.\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "SILO peas�tted"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Praegu on SILO jaoks kirjeldatud alltoodud kirjed.\n"
-#~ "Te v�ite neid lisada ning olemasolevaid muuta."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Selline t�his on juba kasutusel"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "SILO installimine eba�nnestus. Tekkis j�rgnev viga:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX proovib esmalt leida Teie s�steemist SCSI liideseid PCI siinil.\n"
-#~ "Kui neid leitakse, ja vastav juhtprogramm on teada, siis laetakse\n"
-#~ "see m�llu automaatselt.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Teie SCSI liides kasutab ISA siini v�i kui DrakX ei tea,\n"
-#~ "millist juhtprogrammi kasutada v�i Teil ei ole �ldse SCSI liidest,\n"
-#~ "siis k�sitakse Teilt selle kohta.\n"
-#~ "Kui Teil SCSI liidest t�esti ei ole, vastake \"Ei\". Kui Teil aga siiski\n"
-#~ "on, siis vastake \"Jah\". Seej�rel lastakse Teil nimekirjast sobiv\n"
-#~ "juhtprogramm valida.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui olete juhtprogrammi v�lja valinud, on Teil v�imalus anda sellele\n"
-#~ "ka parameetreid. Siiski, enamasti l�heb k�ik kenasti ka ilma neid\n"
-#~ "sisestamata: vastavad andmed leiab juhtprogramm ise.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui automaatne parameetrite otsimine ei t��ta, p��rduge palun\n"
-#~ "oma SCSI liidese dokumentatsiooni poole. Ka samas masinas olev Windows\n"
-#~ "oskab vahel SCSI kohta vajalikku informatsiooni anda."
-
-#~ msgid "Shutting down"
-#~ msgstr "Sulgemine"
-
-#~ msgid "useless"
-#~ msgstr "kasutu"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "Teie arvutist m�ned hulk Windowsi TrueType fondid.\n"
-#~ "Soovite Te neid ka Linuxis kasutada (eeldusel, et Teil on need legaalsed)?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Valige \"Installimine\" kui varem sellele masinale Linuxit ei ole pandud\n"
-#~ "v�i soovite kasutada mitut distributsiooni\n"
-#~ "\n"
-#~ "\n"
-#~ "Valige \"Uuendamine\" kui soovite uuendada m�nd eelmist Mandrake "
-#~ "Linuxit:\n"
-#~ "5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios),\n"
-#~ "Gold 2000 v�i 7.0 (Air)."
-
-#~ msgid "Creating and formatting loopback file %s"
-#~ msgstr "Loon ja vormindan loopback faili %s"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Soovite LILO-t kasutada?"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "N��d v�ite valida paketigrupi, mida soovite installida v�i uuendada.\n"
-#~ "Soovi korral saate valida pakette ka lisaks vastavalt oma �ran�gemisele\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui olete valinud paigaldusviisi \"Ekspert\", saate pakette �kshaaval\n"
-#~ "T�helepanu! M�ned paketid v�ivad n�uda, et oleks installitud ka m�ned\n"
-#~ "teised. Neid nimetatakse paketi s�ltuvusteks. Paketi valimisel valitakse\n"
-#~ "automaatselt ka k�ik tema s�ltuvused. Paketi installimine ilma k�iki\n"
-#~ "s�ltuvusi rahuldamata, on v�imatu."
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) oskab laadida erinevaid Teie arvuti leiduvaid\n"
-#~ "operatsioonis�steeme. Tavaliselt tuvastatakse need installimise k�igus.\n"
-#~ "Kui Te ei n�e neid tuvastatuna, saate need n��d lisada.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Te ei soovi m�nd neist laadida, v�ite selle kohe eemaldada. Sellisel\n"
-#~ "juhul vajate selle laadimiseks vastavat alglaadimisflopit."
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Pakettide valik"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Valige:\n"
-#~ "\n"
-#~ "  - Soovitatav: Te pole kunagi varem Linuxit installinud.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Oma segu: Olete Linuxiga tuttav ja soovite s�steemi kohandada "
-#~ "vastavalt\n"
-#~ "Teie vajadustele. J�rgmisena saate teha valikud \"T��jaam\", \"Arendus\"\n"
-#~ "ja \"Server\", s�ltuvalt Teie arvuti edaspidisest kasutusalast.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-#~ "s�steemi, mis sobiks nagu valatult Teie t�psete ootustege."
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "Laadime kr�ptopakette"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "SCSI seadistamine"
-
-#~ msgid "Local LAN"
-#~ msgstr "LAN"
-
-#~ msgid "developer"
-#~ msgstr "arendaja"
-
-#~ msgid "beginner"
-#~ msgstr "algaja"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "lineaarne (vajalik m�nedel SCSI ketastel)"
-
-#~ msgid "linear"
-#~ msgstr "linearne"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "P�rast %s partitsioneeri %s,"
-
-#~ msgid "changing type of"
-#~ msgstr "t��bi muutmine"
-
-#~ msgid "resizing"
-#~ msgstr "suuruse muutumine"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Suurus: %s MB"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "Loetamatu kickstart fail %s (%s viga)"
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "Valitud on liiga palju pakette: %dMB ei mahu %dMB-le"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "Paigalduseks valitud %d MB. V�ite veel programme juurde valida"
-
-#~ msgid "Enter a floppy (all data will be lost)"
-#~ msgstr "Pange t�hi flopi masinasse (andmed sellel h�vivad)"
-
-#~ msgid "Password:"
-#~ msgstr "Salas�na:"
-
-#~ msgid "User name:"
-#~ msgstr "Kasutajatunnus:"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "HTP alglaadimisketta loomine eba�nnestus.\n"
-#~ "Taasalustage installimist, andes parameetriks ``%s''"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Peate taasalustama installimist uute parameetritega"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Peate taasalustama installimist, laadides flopikettalt"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Sisesta flopi HTP alglaadimisketta loomiseks\n"
-#~ "(k�ik andmed flopil h�vivad)"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "Kirje %s on juba olemas"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Paigaldus v�i uuendamine"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Mis kasutusala soovite?"
diff --git a/perl-install/share/po/eu.po b/perl-install/share/po/eu.po
deleted file mode 100644
index 2baf3fd1e..000000000
--- a/perl-install/share/po/eu.po
+++ /dev/null
@@ -1,12369 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# Joseba Bidaurrazaga van Dierdonck <jbv@euskalnet.net>, 1999-2001.
-# I�igo Salvador Azurmendi <xalba@euskalnet.net>, 2001
-# Elhuyar, 2002
-# Lore Azkarate <lazkarate@uzei.com>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 1999-12-20 11:28+0100\n"
-"Last-Translator: Josu Wali�o <josu@elhuyar.com>\n"
-"Language-Team: Euskara <linux-eu@chanae.alphanet.ch>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Buru guztiak independenteki konfiguratu"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Erabili Xinerama hedapena"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfiguratu \"%s\" (%s) txartela soilik"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Buru anitzeko konfigurazioa"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Zure sistemak buru anitzeko konfigurazioa onartzen du.\n"
-"Zer egin nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Txartel grafikoa"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Hautatu txartel grafiko bat"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Aukeratu X zerbitzaria"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X zerbitzaria"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Aukeratu X kontrolatzailea"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X kontrolatzailea"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "XFree-ren zein konfigurazio izan nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria eduki dezake, baina "
-"XFree %s(r)ekin soilik.\n"
-"Zure txartelak XFree %s euskarria du, eta horrek euskarri hobea izan dezake "
-"2Dan."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria izan dezake XFree %s(r)"
-"ekin."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s 3D hardware-azelerazioarekin"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria izan dezake XFree %s(r)"
-"ekin,\n"
-"KONTUAN IZAN EUSKARRI ESPERIMENTALA DELA ETA ORDENAGAILUA BLOKEA DEZAKEELA."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s 3D hardware-azelerazio ESPERIMENTALAREKIN"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria izan dezake, baina XFree "
-"%s(r)ekin soilik,\n"
-"KONTUAN IZAN EUSKARRI ESPERIMENTALA DELA ETA ORDENAGAILUA BLOKEA DEZAKEELA."
-"Zure txartelak XFree %s euskarria du, eta horrek euskarri hobea izan dezake "
-"2Dan."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalazioaren bistaratze-kontrolatzailea)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfigurazioa"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Hautatu txartel grafikoaren memoria-tamaina"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Hautatu zerbitzariaren aukerak"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Aukeratu monitorea"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitorea"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Bi parametro kritikoak freskatze-maiztasun bertikala eta sinkronizazio-"
-"maiztasun\n"
-"horizontala dira. Lehenengoak pantaila osoa freskatzeko maiztasuna \n"
-"zehazten du eta bigarrenak, eskaneatze-lerroak bistaratzekoa.\n"
-"\n"
-"OSO GARRANTZITSUA da zure monitoreak onar dezakeena baino sinkronizazio-"
-"balio \n"
-" handiagoko monitorerik ez zehaztea: monitorea honda dezakezu.\n"
-" Zalantzarik baduzu, aukeratu ezarpen kontserbadore bat."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Freskatze-maiztasun horizontala"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Freskatze-maiztasun bertikala"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitorea konfiguratu gabe"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Txartel grafikoa oraindik konfiguratu gabe"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Bereizmenak oraindik aukeratu gabe"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Konfigurazioa probatu nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Kontuz: txartel grafiko hau probatzean ordenagailua blokea daiteke"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Konfigurazioaren proba"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"saiatu parametro batzuk aldatzen"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Errorea gertatu da:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d segundo barru irtengo da"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ezarpen hau zuzena da?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Errorea gertatu da, saiatu parametro batzuk aldatzen"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Bereizmena"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Aukeratu bereizmena eta kolorearen sakonera"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Txartel grafikoa: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 zerbitzaria: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Gehiago"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ados"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Aditu modua"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Erakutsi dena"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Bereizmenak"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Teklatu-diseinua: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Sagu-mota: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Sagu-gailua: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitorea: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitorearen SinkHoriz: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitorearen FreskBert: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Txartel grafikoa: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Txartel grafikoaren identifikazioa: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memoria grafikoa: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kolorearen sakonera: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Bereizmena: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 zerbitzaria: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 kontrolatzailea: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X-Window konfigurazioa prestatzen"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Zer egin nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Aldatu monitorea"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Aldatu txartel grafikoa"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Aldatu zerbitzariaren aukerak"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Aldatu bereizmena"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Erakutsi informazioa"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Probatu berriro"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Irten"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Aldaketak mantendu?\n"
-"Hau da uneko konfigurazioa:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X abioan"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ordenagailua abiatzean X automatikoki abiarazteko konfigura dezaket.\n"
-"Berrabiaraztean X hastea nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Hasi berriro saioa %s(e)n aldaketak aktibatzeko"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Amaitu saioa eta, ondoren, sakatu Ktrl-Alt-Atzera"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kolore (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mila kolore (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mila kolore (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milioi kolore (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 mila milioi kolore (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB edo gehiago"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA estandarra 640x480 - 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 - 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 bateragarria, 1024x768 - 87 Hz gurutzelarkatua (ez 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 - 87 Hz gurutzelarkatua, 800x600 - 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA hedatua, 800x600 - 60 Hz, 640x480 - 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Gurutzelarkatu gabeko SVGA, 1024x768 - 60 Hz, 800x600 - 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Frekuentzia altuko SVGA, 1024x768 - 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "1280x1024 - 60 Hz egin dezakeen multifrekuentzia"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "1280x1024 - 74 Hz egin dezakeen multifrekuentzia"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "1280x1024 - 76 Hz egin dezakeen multifrekuentzia"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "1600x1200 - 70 Hz egin dezakeen monitorea"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "1600x1200 - 76 Hz egin dezakeen monitorea"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Arrankeko partizioaren lehen sektorea"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Unitateko lehen sektorea (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO instalazioa"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Non instalatu nahi duzu abioko kargatzailea?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalazioa"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO testu-menuarekin"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO menu grafikoarekin"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "DOS/Windows-etik abiarazi (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Abioko kargatzailearen aukera nagusiak"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Erabili beharreko abioko kargatzailea"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Abioko kargatzailearen instalazioa"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Abioko gailua"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ez du funtzionatzen BIOS zaharretan)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Trinkoa"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "trinkotu"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Bideo modua"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Imajina lehenetsia abiarazi arteko atzerapena"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Pasahitza"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Pasahitza (berriro)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Murriztu komando-lerroko aukerak"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "murriztu"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Garbitu /tmp abiatzen den bakoitzean"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Zehaztu RAM tamaina beharrezkoa bada (%d MB aurkituak)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Gaitu profil anitzak"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Eman ram-tamaina MBtan"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"``Murriztu komando-lerroko aukerak'' aukera ezin da erabili pasahitzik gabe"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Saiatu berriro"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Pasahitzak ez datoz bat"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Hasierako mezua"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware-ren atzerapena"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Nukleoaren abioaren denbora-muga"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Gaitu CDtik abiaraztea?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Gaitu OF abiaraztea?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "SE lehenetsia?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Partizio batean abioko kargatzailea instalatzea erabaki duzu.\n"
-"Horrek esan nahi du baduzula abioko kargatzaile bat abioko unitatean (adib.: "
-"System Commander).\n"
-"\n"
-"Zein da zure abioko unitatea?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hauek dira sarrerak.\n"
-"Beste batzuk gehi ditzakezu edo lehendik daudenak aldatu."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Gehitu"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Eginda"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Aldatu"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Zer sarrera-mota gehitu nahi duzu?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Beste SE bat (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Beste SE bat (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Beste SE bat (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imajina"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Erantsi"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Irakurri/idatzi"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Taula"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Ez-segurua"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiketa"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Lehenetsia"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-tamaina"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "BideorikEz"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Kendu sarrera"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Ez da etiketa hutsik onartzen"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Nukleo-imajina bat zehaztu behar duzu"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Erroko partizio bat zehaztu behar duzu"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Etiketa hau jadanik erabili da"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s interfaze aurkitu dira"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Baduzu besterik?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Ba duzu %s interfazerik?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ez"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Bai"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ikus hardwarearen informazioa"
-
-# #this syntax doesn't work yet in perl :-(
-# #msgid "Installing driver for %s card %s"
-# #msgstr "%2$s %1$s txartelaren kontrolatzailea instalatzen"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s %s txartelaren kontrolatzailea instalatzen"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(%s modulua)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Zein %s kontrolatzaile probatu behar dut?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Kasu batzuetan, %s kontrolatzaileak informazio gehigarria behar du egoki \n"
-"funtzionatzeko, nahiz eta normalki hori gabe ongi funtzionatzen duen. Aukera "
-"gehigarriak zehaztu \n"
-"nahi dituzu, edo kontrolatzaileari zure makina probatzen\n"
-"utzi, behar duen informazioa bilatzeko? Batzuetan, probatzeak ordenagailua "
-"blokeatuko du, baina\n"
-"horrek ez luke kalterik egin beharko."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Autoproba"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Zehaztu aukerak"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Orain %s moduluari bere aukerak eman dizkiozu.\n"
-"Ohartu helbiderean aurretik 0x aurrizkia jarri behar dela, adlib. '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Orain %s moduluari bere aukerak eman diezazkiokezu.\n"
-"Aukerak ``izena=balioa izena2=balioa2 ...'' formatuan daude.\n"
-"Adibidez, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modulu-aukerak:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Huts egin du %s modulua kargatzean.\n"
-"Beste parametro batzuekin saiatu nahi duzu berriro?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "X programen atzipena"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "rpm tresnen atzipena"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "onartu \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "administrazio-fitxategien atzipena"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s jadanik gehituta)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Pasahitz hau sinpleegia da"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Eman erabiltzaile-izen bat"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Erabiltzaile-izenak minuskulaz idatzitako letrak, zenbakiak, `-' eta `_' "
-"soilik izan ditzake"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Erabiltzaile-izen hau gehituta dago jadanik"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Gehitu erabiltzailea"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Sartu erabiltzaile bat\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Onartu erabiltzailea"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Benetako izena"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Erabiltzaile-izena"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikonoa"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatikoki hasi saioa"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ordenagailua konfigura dezaket automatikoki erabiltzaile bat sartzeko.\n"
-"Eginbide hau erabili nahi duzu?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Aukeratu erabiltzaile lehenetsia:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Aukeratu exekutatu beharreko leiho-kudeatzailea:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Aukeratu erabiltzeko hizkuntza bat."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Instalatu ondoren erabilgarri egongo diren beste hizkuntza batzuk aukera "
-"ditzakezu"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Denak"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Eman baimena erabiltzaile guztiei"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Pertsonalizatua"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Ez konpartitu"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "%s paketea instalatu egin behar da. Instalatu nahi duzu?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "NFS edo Samba erabiliz esporta dezakezu. Zein nahi duzu"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Derrigorrezko %s paketea falta da"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Utzi"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Abiarazi userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Erabiltzaileen araberako konpartitzeak \"fileshare\". \n"
-"taldea erabiltzen du. Userdrake erabil dezakezu talde \n"
-"honetan erabiltzeak gehitzeko."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Ongi etorri Crackers-era"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Txikia"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Estandarra"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Handia"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Handiagoa"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidea"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Maila hau kontuz erabili behar da. Sistema erabilerrazagoa izango da, baina\n"
-"oso erraz erasotzekoa: ez da erabili behar beste ordenagailu batzuekin edo \n"
-"Internetekin konektatuta dauden makinetan. Ez dago pasahitzik."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Pasahitzak gaituta daude orain, baina sareko ordenagailu gisa erabiltzea ez "
-"da komeni oraindik."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Hau da Internetera bezero gisa konektatzeko erabiliko diren "
-"ordenagailuentzat gomendatzen den segurtasun estandarra. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Murriztapen batzuk daude, eta egiaztapen automatiko gehiago gauero egiten "
-"dira."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Segurtasun-maila honekin, sistema hau erabil liteke zerbitzari gisa.\n"
-"Segurtasun hau nahikoa da sistema bezero askoren konexioak onartzen dituen \n"
-"zerbitzari gisa erabili ahal izateko. Oharra: zure makina Interneteko bezero "
-"soila bada, hobe duzu maila apalagoa."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Aurreko mailan oinarritua, baina sistema erabat itxita dago.\n"
-"Segurtasun-eginbideak maximoan jarrita daude."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Aukeratu segurtasun-maila"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Segurtasun-maila"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Erabili libsafe zerbitzarietarako"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Buffer-gainezkatzeen eta formatu-kateen erasoen aurka defendatzen duen "
-"liburutegi bat."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Ongi etorri %s sistema eragilearen aukeratzailera!\n"
-"\n"
-"Aukeratu sistema eragile bat goiko zerrendan edo\n"
-"itxaron %d segundo lehenetsitako abiorako.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Ongi etorri GRUB sistema eragilearen aukeratzailera!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Erabili %c eta %c teklak zein sarrera nabarmenduko den hautatzeko."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Sakatu sartu hautatutako SE abiarazteko, 'e' abiarazi aurreko"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandoak editatzeko, edo 'c' komando-lerroa nahi baduzu."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Nabarmendutako sarrera automatikoki abiaraziko da %d segundotan."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "ez dago nahiko leku /boot-en"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Mahaigaina"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Hasi menua"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Abioko kargatzailea ezin da %s partizio batean instalatu\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "oraindik ez da laguntzarik inplementatu.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Abioko estilo-konfigurazioa"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fitxategia"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fitxategia/I_rten"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle kategorizatze-monitorea"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle monitorea"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitore tradizionala"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Gtk+ monitore tradizionala"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Abiarazi Aurora abioan"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modua"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modua"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Orain %s erabiltzen ari zara Abioko Kudeatzaile gisa.\n"
-"Egin klik 'Konfiguratu'n instalazio-morroia abiarazteko."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfiguratu"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistema modua"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Abiarazi X-Window sistema hasieran"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ez, ez dut saioa automatikoki hasi nahi"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Bai, automatikoki honekin hasi nahi dut (erabiltzailea, mahaigaina)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Ados"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ezin da ireki /etc/inittab irakurtzeko: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutu"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "minutu bat"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundo"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Ezin da pantaila-argazkirik egin partizioak egin aurretik"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"%s(e)n instalazioa egindakoan pantaila-argazkiak erabilgarri egongo dira"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Frantzia"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgika"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Txekiar errepublika"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Alemania"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grezia"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norvegia"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Suedia"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Herbehereak"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Estatu Batuak"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Egin zure datuen babeskopia lehendabizi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Irakurri arretaz"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Aboot erabiltzeko asmoa baduzu, utzi lekua (2048 sektore nahikoa da)\n"
-"diskoaren hasieran"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Errorea"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Morroia"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Aukeratu ekintza"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"FAT partizio handi bat duzu\n"
-"(normalean MicroSoft Dos/Windows-ek erabilia).\n"
-"Lehendabizi partizio horri tamaina aldatzea gomendatzen dizut\n"
-"(egin klik bertan, gero egin klik \"Aldatu tamaina\"n)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Egin klik partizio batean"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Xehetasunak"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Hutsik"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Bestelakoa"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Fitxategi-sistemen motak:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Sortu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Mota"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Erabili ``%s'' horren ordez"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Ezabatu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Erabili ``Desmuntatu'' lehendabizi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"%s partizio-mota aldatu ondoren, partizio honetako datu guztiak galdu egingo "
-"dira"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Aukeratu partizio bat"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Aukeratu beste partizio bat"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Irten"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Aldatu aditu modura"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Aldatu modu normalera"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Desegin"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Jarraitu hala ere?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Irten gorde gabe"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Irten partizio-taula idatzi gabe?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "/etc/fstab aldaketak gorde nahi dituzu?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Auto-esleitu"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Garbitu dena"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Disko gogorraren informazioa"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Lehen mailako partizio guztiak erabilita daude"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ezin da partizio gehiago gehitu"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Partizio gehiago edukitzeko, ezabatu horietako bat partizio hedatu bat sortu "
-"ahal izateko"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Gorde partizio-taula"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Leheneratu partizio-taula"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Berreskuratu partizio-taula"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Birkargatu partizio-taula"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Euskarri aldagarrien automuntatzea"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Hautatu fitxategia"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Babeskopiako partizio-taulak ez du tamaina bera\n"
-"Jarraitu hala ere?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Kontuz"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Sartu diskete bat unitatean\n"
-"Disketeko datu guztiak galdu egingo dira"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Partizio-taula berreskuratzen saiatzen"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Informazio xehea"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Muntatze-puntua"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Aukerak"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Aldatu tamaina"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Lekuz aldatu"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formateatu"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Muntatu"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Gehitu RAIDi"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Gehitu LVMri"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmuntatu"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Kendu RAIDetik"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Kendu LVMtik"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Aldatu RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Erabili atzera-begiztarako"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Sortu partizio berria"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Hasierako sektorea: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Tamaina MBtan: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Fitxategi-sistemaren mota: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Muntatze-puntua: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Hobespena: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Atzera-begiztako fitxategia kendu?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Aldatu partizio-mota"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Zein fitxategi-sistema nahi duzu?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "ext2tik ext3ra aldatzen"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Non muntatu nahi duzu %s atzera-begiztako fitxategia?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Non muntatu nahi duzu %s gailua?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ezin da muntatze-puntuaren ezarpena kendu, partizio hau atzera-begiztarako "
-"erabiltzen delako\n"
-"Kendu atzera-begizta lehendabizi"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "FAT fitxategi-sistemaren mugak kalkulatzen"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Tamaina aldatzen"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Partizio honi ezin zaio tamaina aldatu"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Partizio honetako datu guztiek babeskopia eduki beharko lukete"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"%s partizioa tamainaz aldatu ondoren, partizioko datu guztiak galdu egingo "
-"dira"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Aukeratu tamaina berria"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Tamaina berria MBtan: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Zein diskotara eraman nahi duzu?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektorea"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Zein sektoretara eraman nahi duzu?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Lekuz aldatzen"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Partizioa lekuz aldatzen..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Aukeratu lehendik dagoen RAID bat gehitzeko"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "berria"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Aukeratu lehendik dagoen LVM bat gehitzeko"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM izena?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Partizio hau ezin da atzera-begiztarako erabili"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Atzera-begizta"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Atzera-begiztako fitxategi-izena: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Eman fitxategi-izen bat"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Fitxategi hau beste atzera-begizta batek erabiltzen du, aukeratu beste bat"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Fitxategia badago lehendik ere. Erabili?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Muntatze-aukerak"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Hainbat"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "gailua"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "maila"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "zatiaren tamaina"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Kontuz ibili: eragiketa hau arriskutsua da."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Nolako partizioa?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Ezin dut onartu /boot hain urrun sortzea unitatean (zilindroa > 1024).\n"
-"Edo LILO erabiltzen duzu eta ez du funtzionatuko, edo ez duzu LILO "
-"erabiltzen eta ez duzu /boot erabili beharrik"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Erro gisa gehitzeko hautatu duzun partizioa (/) fisikoki disko gogorraren\n"
-"1024. zilindroaz haratago dago, eta ez duzu /boot partiziorik.\n"
-"LILO abioko kudeatzailea erabiltzeko asmoa baduzu, ez ahaztu /boot partizioa "
-"gehitzea"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Softwareko RAID partizio bat hautatu duzu erro gisa (/).\n"
-"Ez dago abioko kargatzailerik hori /boot partiziorik gabe erabil "
-"dezakeenik.\n"
-"Beraz, kontuan izan /boot partizioa gehitu behar duzula"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s unitatearen partizio-taula diskoan idatziko da!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Berrabiarazi egin beharko duzu aldaketek eragina izan dezaten"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"%s partizioa formateatu ondoren, partizioko datu guztiak galdu egingo dira"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formateatzen"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "%s atzera-begiztako fitxategia formateatzen"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "%s partizioa formateatzen"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Ezkutatu fitxategiak"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Eraman fitxategiak partizio berrira"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-" %s direktorioak baditu datu batzuk\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Fitxategiak partizio berrira eramaten"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "%s kopiatzen"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "%s kentzen"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "%s partizioa %s da orain"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Gailua: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS unitate-letra: %s (uste hutsa)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Mota: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Izena: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Hasi: %s sektorea\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Tamaina: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektore"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "%d zilindrotik %d zilindrora\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formateatua\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Formateatu gabe\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Muntatuta\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Atzera-begiztako fitxategia(k):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Lehenespenez abiarazteko partizioa\n"
-"    (MS-DOS abiorako, ez lilo-rako)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "%s maila\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "%s zatiaren tamaina\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "%s RAID-diskoak\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Atzera-begiztako fitxategi-izena: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Partizio hau kontrolatzailearen \n"
-"partizioa izan daiteke, hobe duzu\n"
-"bere horretan uztea.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Bootstrap partizio berezi hau\n"
-"sistemaren abio bikoitza\n"
-"egiteko da.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamaina: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s zilindro, %s buru, %s sektore\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "%s LVM-diskoak\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partizio-taularen mota: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr " -  bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Aukerak: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Fitxategi-sistema enkriptatzeko gakoa"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Aukeratu fitxategi-sistema enkriptatzeko gakoa"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Enkriptatze-gako hau sinpleegia da (gutxienez %d karaktere izan behar ditu)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Enkriptatze-gakoak ez datoz bat"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Enkriptatze-gakoa"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Enkriptatze-gakoa (berriro)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Aldatu mota"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Egin klik euskarri batean"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Bilatu zerbitzarietan"
-
-# #this syntax doesn't work yet in perl :-(
-# #msgid "%s formatting of %s failed"
-# #msgstr "%2$s(r)i %1$s formatua emateak huts egin du"
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s %s(r)i formatua emateak huts egin du"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ez dakit nola formateatu %s %s motan"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "%s partizioa %s direktorioan muntatzeak huts egin du"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck-k huts egin du %d irteera-kodearekin edo %d seinalearekin"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "errorea %s desmuntatzean: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "sinplea"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "/usr-rekin"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "zerbitzaria"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ezin da JFS erabili 16MB baino gutxiagoko partizioetarako"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ezin da ReiserFS erabili 32MB baino gutxiagoko partizioetarako"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Muntatzen-puntuek / batez hasi behar dute"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jadanik badago %s muntatze-puntua duen partizio bat\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ezin da LVM bolumen logikoa erabili %s muntatze-punturako"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Direktorio honek erroko fitxategi-sisteman egon behar du"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Egiazko fitxategi-sistema (ext2, reiserfs) behar duzu muntatze-puntu "
-"honetarako\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Ezin da fitxategi-sistema enkriptatua erabili %s muntatze-punturako"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Ez dago nahikoa leku libre auto-esleitzeko"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Ez dago zer eginik"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Errorea %s idazteko irekitzean: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Errorea gertatu da - ez da fitxategi-sistema berriak sortzeko gailu "
-"baliozkorik aurkitu. Aztertu zure hardwarea arazo honen arrazoia bilatzeko"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Ez duzu partiziorik!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux erabiltzaile anitzeko sistema da, hau da, erabiltzaile bakoitzak\n"
-"bere hobespenak eta bere fitxategiak eduki ditzake. Gehiago jakiteko\n"
-"``Erabiltzailearen gida'' irakurri. Baina administratzailea den \"root\"-ak\n"
-"ez bezala, hemen gehitutako erabiltzaileek debekatuta izango dute ezer\n"
-"aldatzea euren fitxategiak eta konfigurazioa izan ezik. Zuretzat gutxienez\n"
-"ohiko erabiltzaile bat sortu beharko duzu. Eta kontu horretan hasi beharko\n"
-"zenuke eguneroko saioa. Eguneroko saioa \"root\" gisa hastea oso\n"
-"erabilgarria den arren, oso arriskutsua ere izan daiteke! Hutsegiterik\n"
-"txikienak sistemak gehiago ez funtzionatzea eragin lezake. Ohiko\n"
-"erabiltzaile gisa hutsegite larri bat egiten baduzu, informazioren bat gal\n"
-"dezakezu, baina ez sistema osoa.\n"
-"\n"
-"Lehendabizi, zure benetako izena sartu beharko duzu. Hori ez da\n"
-"derrigorrezkoa noski - berez nahi duzuna sar dezakezu. DrakXk gero zuk\n"
-"laukian sartutako lehen hitza hartu eta \"Erabiltzaile-izena\" delakora\n"
-"eramango du. Hori izango da erabiltzaile jakin horrek sisteman saioa\n"
-"hasteko erabiliko duen izena. Alda dezakezu. Gero pasahitz bat sartu\n"
-"beharko duzu hemen. Erabiltzaile ez-pribilegiatuaren (arruntaren) pasahitza\n"
-"ez da \"root\"-arena bezain funtsezkoa segurtasunaren aldetik, baina ez da\n"
-"horregatik arduragabekeriaz jokatu behar - izan ere, zure fitxategiak\n"
-"baitaude arriskuan.\n"
-"\n"
-"\"Onartu erabiltzailea\"n klik eginez gero, nahi adina gehi ditzakezu.\n"
-"Gehitu erabiltzaile bat zure lagun bakoitzeko: zure aita edo ahizpa,\n"
-"adibidez. Nahi dituzun erabiltzaile guztiak gehitu ondoren, hautatu\n"
-"\"Eginda\".\n"
-"\n"
-"\"Aurreratua\" botoian klik eginez, erabiltzaile horren \"shell\"-a alda\n"
-"dezakezu (bash lehenespenez)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Goiko zerrendan zure disko gogorrean detektatutako Linux partizioak daude.\n"
-"Morroiak egindako aukerak manten ditzakezu, egokiak dira instalazio \n"
-"ohikoenetarako. Aldaketarik egiten baduzu, gutxienez erroko partizio bat\n"
-"definitu behar duzu (\"/\"). Ez aukeratu partizio txikiegirik edo ezin "
-"izango duzu\n"
-"nahikoa software instalatu. Datuak beste partizio batean biltegiratu\n"
-"nahi badituzu, \"/home\"rako partizio bat ere sortu beharko duzu\n"
-"(Linux partizio bat baino gehiago baduzu soilik da posible).\n"
-"\n"
-"Partizio bakoitza honela zerrendatzen da: \"Izena\", \"Edukiera\".\n"
-"\n"
-"\"Izena\" honela egituratzen da: \"disko gogorraren mota\", \"disko "
-"gogorraren zenbakia\",\n"
-"\"partizio-zenbakia\" (adibidez, \"hda1\").\n"
-"\n"
-"\"Disko gogorraren mota\" \"hd\" da zure diskoa IDE disko gogorra bada eta\n"
-"\"sd\" SCSI disko gogorra bada.\n"
-"\n"
-"\"Disko gogorraren zenbakia\" beti \"hd\" edo \"sd\"ren ondoko letra bat "
-"izaten da. IDE\n"
-"disko gogorretan:\n"
-"\n"
-" * \"a\"k \"IDE kontroladore primarioko disko gogor nagusia \" esan nahi "
-"du,\n"
-"\n"
-" * \"b\"k \"IDE kontroladore primarioko mendeko disko gogorra\" esan nahi "
-"du,\n"
-"\n"
-" * \"c\"k \"IDE kontroladore sekundarioko disko gogor nagusia\" esan nahi "
-"du,\n"
-"\n"
-" * \"d\"k \"IDE kontroladore sekundarioko mendeko disko gogorra\" esan nahi "
-"du,\n"
-"\n"
-"\n"
-"SCSI disko gogorretan, \"a\" letrak \"SCSI ID baxuena\" esan nahi du, \"b"
-"\"letrak \"bigarren SCSI ID baxuena\", etab."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux instalazioa hainbat CD-ROMetan dago banatuta dago. DrakXk\n"
-"badaki hautatako pakete bat beste CD-ROM batean kokatuta dagoen edo ez, eta\n"
-"uneko CDa atera eta beste bat sartzeko eskatuko dizu behar ahala."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Sisteman zein programa instalatu nahi dituzun zehazteko garaia da. Milaka\n"
-"pakete daude Mandrake Linux-entzat erabilgarri, eta ez duzu denak buruz\n"
-"jakin beharrik.\n"
-"\n"
-"CD-ROMetik instalazio estandarra egin behar baduzu, lehendabizi Orain\n"
-"dituzun CDak zehazteko eskatuko zaizu,(Aditu moduan soilik). Egiaztatu CDen\n"
-"etiketak eta nabarmendu instalaziorako erabilgarri dituzun CDei dagozkien\n"
-"laukiak. Sakatu \"Ados\" jarraitzeko prest zaudenean.\n"
-"\n"
-"Paketeak zure ordenagailuaren erabilera zehatz bati dagozkion Taldeetan\n"
-"ordenatzen dira. Taldeak berak lau sekziotan sailkatzen dira:\n"
-"\n"
-" * \"Lan-estazioa\": zure ordenagailua lan-estazio gisa erabiltzeko asmoa\n"
-"baduzu, hautatu talde bat edo gehiago.\n"
-"\n"
-" * \"Garapena\": ordenagailua programatzeko erabili behar baduzu, aukeratu\n"
-"nahi d(it)uzun taldea(k).\n"
-"\n"
-" * \"Zerbitzaria\": ordenagailua zerbitzari izateko erabili nahi baduzu,\n"
-"bertan instalatu nahi dituzun zerbitzurik ohikoenak hautatu ahal izango\n"
-"dituzu.\n"
-"\n"
-" * \"Ingurune grafikoa\": azkenik, hemen hautatuko duzu zure ingurune\n"
-"grafiko gogokoena. Gutxienez bat hautatu behar duzu, lan-estazio grafikoa\n"
-"eduki nahi baduzu!\n"
-"\n"
-"Saguaren kurtsorea talde-izen baten gainean mugituz, talde horri buruzko\n"
-"azalpen-testu labur bat bistaratuko da.\n"
-"\n"
-"\"Pakete indibidualen hautapena\" laukia hauta dezakezu. Lauki hori oso\n"
-"erabilgarri izango zaizu eskaintzen diren paketeak ezagutzen badituzu, edo\n"
-"instalatutako dena erabat kontrolatu nahi baduzu.\n"
-"\n"
-"Instalazioa \"Eguneratu\" moduan hasi baduzu, talde guztia desauta dezakezu\n"
-"beste paketerik instala ez dadin. Hori erabilgarria da lehendik dagoen\n"
-"sistema bat konpontzeko edo eguneratzeko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Azkenik, pakete indibidualak hautatu ala ez aukeraren arabera, taldetan eta\n"
-"azpitaldetan sailkatutako pakete guztiak dituen zuhaitz bat aurkeztuko\n"
-"zaizu. Zuhaitza arakatzen duzun bitartean, talde osoak, azpitaldeak nahiz\n"
-"pakete indibidualak hautatu ahal izango dituzu.\n"
-"\n"
-"Pakete bat zuhaitzean hautatzen duzun bakoitzean, azalpen bat agertuko da\n"
-"eskuinean. Hautaketa amaitutakoan, egin klik \"Instalatu\" botoian, eta\n"
-"instalazio-prozesua abiaraziko du. Zure hardwarearen abiaduraren arabera\n"
-"eta instalatu behar diren paketeen kopuruaren arabera, denbora-tarte bat\n"
-"beharko da prozesua burutzeko. Erabat burutzeko denboraren estimazioa\n"
-"bistaratzen da pantailan, kafetxo bat hartzeko denbora nahikorik ote duzun\n"
-"jakin dezazun.\n"
-"\n"
-"!! Zerbitzari-pakete bat hautatu baduzu, nahita edo talde oso baten zati\n"
-"zelako, zerbitzari horiek benetan instalatu nahi dituzun berresteko\n"
-"eskatuko zaizu. Mandrake Linux-en barruan, instalatutako edozein zerbitzari\n"
-"lehenetsitako moduan hasieratzen da. Seguruak diren arren eta banaketa\n"
-"argitaratu zen unean arazorik sortu ez bazuten ere, gerta liteke\n"
-"segurtasun-hutsuneak aurkitzea Mandrake Linux-en bertsio hau bukatu\n"
-"ondoren. Zerbitzu jakin batek zer egin behar duen edo zergatik instalatzen\n"
-"den ez badakizu, hautatu \"Ez\". \"Bai\" sakatzean zerrendatutako\n"
-"zerbitzuak instalatuko dira, eta lehenespen gisa automatikoki abiaraziko\n"
-"dira. !!\n"
-"\n"
-"\"Mendekotasun automatikoak\" aukerak Abisua elkarrizketa-koadroa\n"
-"desgaitzen du instalatzaileak pakete bat hautatzen duen bakoitzean. Hori\n"
-"gertatzen da instalazioa ongi burutzeko behar den beste pakete batekiko\n"
-"mendekotasuna erabaki duelako.\n"
-"\n"
-"Zerrendaren beheko aldean dagoen disketearen ikono txikiak aurreko\n"
-"instalazio batean aukeratutako pakete-zerrenda kargatzea ahalbidetzen du.\n"
-"Ikono horretan klik egitean, beste instalazio baten bukaeran aurrez\n"
-"sortutako diskete bat sartzeko eskatuko zaizu. Ikus diskete hori sortzeko\n"
-"moduari buruzko azken urratsaren bigarren iradokizuna."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Zure ordenagailua Internetera edo sare lokal batera konektatu nahi baduzu,\n"
-"egin aukera zuzena. Aktibatu zure gailua aukera zuzena hautatu aurretik\n"
-"DrakXk automatikoki detekta dezan.\n"
-"\n"
-"Mandrake Linux-ek instalazioa egitean Interneteko konexio bat konfiguratzea\n"
-"proposatzen du. Erabilgarri dauden konexioak: modem tradizionala, ISDN\n"
-"modema, ADSL konexioa, kable-modema, eta azkenik, LAN konexio soila\n"
-"(Ethernet).\n"
-"\n"
-"Hemen ez dugu konfigurazio bakoitza zehaztuko. Ziurtatu Interneteko\n"
-"zerbitzu-hornitzailearen edo sistema-administratzailearen parametro guztiak\n"
-"dituzula.\n"
-"\n"
-"Eskuliburuan Interneteko konexioei buruzko kapitulua kontsulta dezakezu\n"
-"konfigurazioaren xehetasunak ezagutzeko, edo bestela, sistema instalatu\n"
-"arte itxaron, eta zure konexioa konfiguratzeko bertan deskribatzen zaizun\n"
-"programa erabili.\n"
-"\n"
-"Sarea geroago, instalazioa egin ondoren, konfiguratu nahi baduzu, edo\n"
-"sare-konexioa konfiguratzen bukatu baduzu, sakatu \"Utzi\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Orain abiarazteko orduan zein zerbitzu abiaraztea nahi duzun aukera\n"
-"dezakezu.\n"
-"\n"
-"Hemen uneko instalazioarekin erabilgarri dauden zerbitzu guztiak ageri\n"
-"dira. Berrikusi arretaz eta kendu hautatze-marka abiaraztean beti behar ez\n"
-"direnei.\n"
-"\n"
-"Zerbitzu jakin bat hautatuz, zerbitzu horri buruzko azalpen-testu labur bat\n"
-"eskuratuko duzu. Hala ere, zerbitzu bat erabilgarria den ala ez ziur ez\n"
-"bazaude, seguruagoa da jokabide lehenetsia uztea.\n"
-"\n"
-"Etapa honetan, kontuz ibili zure ordenagailua zerbitzari gisa erabiltzeko\n"
-"asmoa baduzu: ziur aski ez duzu nahi izango behar ez duzun zerbitzurik\n"
-"abiaraztea. Gogoan izan zerbitzu batzuk arriskutsuak izan daitezkeela\n"
-"zerbitzari batean gaitzen badira. Oro har, benetan behar dituzun zerbitzuak\n"
-"soilik hautatu."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux-ek GMT (Greenwich Mean Time) ordua erabiltzen du eta tokian\n"
-"tokiko ordura aldatzen du, hautatutako ordu-zonaren arabera. Desaktibatu\n"
-"nahi baduzu, desautatu \"Hardwarearen ordua GMTn ezarria\" eta hardwarearen\n"
-"ordua eta sistemaren ordua berdinak izango dira. Erosoa da makinan beste\n"
-"sistema eragile bat dagoenerako, esate baterako, Windows.\n"
-"\n"
-"\" Ordu-sinkronizazio automatikoa\" aukerak automatikoki doituko du "
-"erlojua \n"
-"Interneteko urruneko ordu-zerbitzari batekin konektatuz. Aukera ezazu\n"
-"zuregandik hurbil dagoen zerbitzari bat. Eginbide hau erabili ahal izateko \n"
-"Interneteko konexioa beharko duzu, noski. Zure makinan ordu-zerbitzari bat\n"
-"instalatuko du eta zure sare lokaleko beste makina batzuetatik ere erabili \n"
-"ahal izango duzu, nahi izanez gero."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (X Window sistema) GNU/Linux-en interfaze grafikoaren bihotza da, eta\n"
-"Mandrake Linux-en dauden ingurune grafiko guztiak (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) horren araberakoak dira. Atal honetan, DrakX X automatikoki\n"
-"konfiguratzen saiatuko da.\n"
-"\n"
-"Oso gutxitan huts egiten du, baldin eta hardwarea ez bada oso zaharra (edo\n"
-"oso berria). Ongi badoa, X automatikoki abiaraziko du ahalik eta\n"
-"bereizmenik onenarekin, monitorearen tamainaren arabera. Orduan leiho bat\n"
-"agertuko da eta ikus dezakezun galdetuko dizu.\n"
-"\n"
-"\"Aditu\" instalazio bat egiten ari bazara, X konfigurazioaren morroia\n"
-"sartuko duzu. Ikus eskuliburuan dagokion atala morroi honi buruzko\n"
-"informazio gehiago lortzeko.\n"
-"\n"
-"Menua ikus badezakezu eta \"Bai\" erantzun baduzu, DrakX hurrengo urratsera\n"
-"joango da. Mezua ikusi ezin baduzu, konfigurazioa okerra dela esan nahi du\n"
-"horrek, eta proba automatikoki bukatuko da 10 segundo igarota; pantaila\n"
-"leheneratu egingo da."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"X konfigurazioa probatzen duzun lehen aldian, baliteke oso pozik ez\n"
-"geratzea ikusten denarekin (pantaila txikiegia, ezkerrera edo eskuinera\n"
-"mugitua...). Beraz, X zuzen abiarazten bada ere DrakXk gero konfigurazioa\n"
-"zuretzat egokia den galdetuko dizu. Aldatzea ere proposatuko dizu aurki\n"
-"ditzakeen baliozko moduen zerrenda bistaratuz eta bat hautatzeko eskatuz.\n"
-"\n"
-"Azken baliabide gisa, oraindik Xk funtzionatzea lortu ez baduzu, aukeratu\n"
-"\"Aldatu txartel grafikoak\", hautatu \"Zerrendatu gabeko txartela\", eta\n"
-"zein zerbitzari nahi duzun galdetzean, aukeratu \"FBDev\". Hau aukera\n"
-"segurua da, edozein txartel grafiko modernorekin funtzionatzen duena. Gero,\n"
-"aukeratu \"Probatu berriro\" ziur egoteko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Azkenik, interfaze grafikoa abiaraztean ikusi nahi duzun galdetuko zaizu.\n"
-"Kontuan eduki galdera hori konfigurazioa ez probatzea aukeratu baduzu ere\n"
-"egingo zaizula. Jakina, \"Ez\" erantzun nahi izango duzu zure ordenagailuak\n"
-"zerbitzari gisa jokatu behar badu, edo bistaratzea konfiguratuta edukitzea\n"
-"lortzen ez baduzu."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux-en CD-ROMak Berreskuratu modu inkorporatua dauka. Hiru\n"
-"modutan eskura dezakezu: CD-ROMetik abiaraziz, abioan >>F1<< tekla sakatuz\n"
-"eta, gonbitean, >>berreskuratu<< idatziz. Baina zure ordenagailua\n"
-"CD-ROMetik abiarazi ezin bada, urrats hau erabili beharko zenuke bi egoera\n"
-"hauetan gutxienez:\n"
-"\n"
-" * abioko kargatzailea instalatzean, DrakXk zure disko nagusiko abioko\n"
-"sektorea berridatziko du (MBR) (baldin eta ez bazara beste abioko\n"
-"kudeatzaile bat erabiltzen ari), beraz Windows-ekin nahiz GNU/Linux-ekin\n"
-"(zure sisteman Windows baduzu) has zaitezke. Windows atzera berriz\n"
-"instalatu behar baduzu, Microsoft-en instalazio-prozesuak abioko sektorean\n"
-"gainidatziko du eta ezin izango duzu GNU/Linux abiarazi!\n"
-"\n"
-" * arazoren bat sortzen bada eta GNU/Linux disko gogorretik abiarazi ezin\n"
-"baduzu, diskete hau izango da GNU/Linux abiarazteko bide bakarra. Sistema\n"
-"leheneratzeko makina bat sistema-tresna ditu, eta oso erabilgarria da\n"
-"sistemak huts egiten duenean, argindarra joan delako, idazketa-akats bat\n"
-"egin delako, pasahitzean akats tipografiko bat egin delako edo beste\n"
-"zerbait gertatu delako.\n"
-"\n"
-"Urrats honetan klik egitean, unitatean disko bat sartzeko eskatuko zaizu.\n"
-"Sartzen duzun disketeak hutsik egon behar du, edo behar ez dituzun datuak\n"
-"eduki behar ditu. Ez duzu formateatu beharrik DrakXk disko osoa\n"
-"berridatziko baitu."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Hona iritsita, Mandrake Linux sistema eragilea disko gogorrean non\n"
-"instalatu aukeratu beharko duzu. Disko gogorra hutsik badago edo lehendik\n"
-"dagoen sistema eragile batek leku erabilgarri guztia betetzen badu,\n"
-"partizioa egin beharko duzu. Funtsean, disko gogorrean partizioa egitea\n"
-"diskoa logikoki zatitzea da, Mandrake Linux sistema berria instalatzeko\n"
-"lekua sortzeko.\n"
-"\n"
-"Partizio-prozesuaren ondorioak itzulbiderik gabekoak izan ohi direnez,\n"
-"partizioa egitea korapilatsua eta deserosoa izan daiteke esperientziarik\n"
-"gabeko erabiltzailea bazara. Zorionez, badago prozesu hau errazten duen\n"
-"morroi bat. Hasi baino lehen, kontsultatu eskuliburua eta hartu behar duzun\n"
-"denbora.\n"
-"\n"
-"Instalazioa Aditu moduan exekutatzen baduzu, Mandrake Linux-en\n"
-"partizio-tresna den DiskDrake sartuko duzu, partizioak doitzea ahalbidetuko\n"
-"baitizu. Ikusi eskuliburuko DiskDrake-ren atala. Instalazioaren\n"
-"interfazetik, morroiak hemen deskribatu bezala erabil ditzakezu,\n"
-"elkarrizketako \"Morroia\" botoian klik eginez.\n"
-"\n"
-"Partizioak jadanik definitu badira, lehendik dagoen instalazio batetik\n"
-"nahiz beste partizio-tresna batetik, hautatu zure Linux sistema\n"
-"instalatzekoak.\n"
-"\n"
-"Partizioak definitu ez badira, morroia erabiliz sortu beharko dituzu. Disko\n"
-"gogorraren konfigurazioaren arabera, hainbat aukera daude erabilgarri:\n"
-"\n"
-" * \"Leku librea erabili\": aukera honek unitate huts(ar)en partizio\n"
-"automatikoa ekarriko du. Ez zaizu beste galderarik egingo.\n"
-"\n"
-" * \"Lehendik dagoen partizioa erabili\": morroiak lehendik dagoen Linux\n"
-"partizio bat edo gehiago detektatu du disko gogorrean. Erabili nahi\n"
-"badituzu, hautatu aukera hau.\n"
-"\n"
-" * \"Erabili Windows-en partizio leku librea \": zure disko gogorrean\n"
-"Microsoft Windows instalatuta badago eta bertako leku erabilgarri guztia\n"
-"betetzen badu, lekua libratu beharko duzu Linux-en datuentzat. Horretarako,\n"
-"Microsoft Windows-en partizioa eta datuak ezaba ditzakezu (ikus \"Ezabatu\n"
-"disko osoa\" edo \"Aditu modua\"ren irtenbideak) edo Microsoft Windows-en\n"
-"partizioaren tamaina aldatu. Tamaina-aldaketa daturik galdu gabe egin\n"
-"daiteke. Irtenbide hau da gomendagarriena zure ordenagailuan Mandrake Linux\n"
-"eta Microsoft Windows erabili nahi badituzu.\n"
-"\n"
-"   Aukera hau egin baino lehen, kontuan eduki prozedura honen ondoren\n"
-"Microsoft Windows-en partizioa orain baino txikiagoa izango dela. Leku\n"
-"gutxiago izango duzu, beraz, Microsoft Windows-eko datuak gordetzeko edo\n"
-"software berria instalatzeko.\n"
-"\n"
-" * \"Ezabatu disko osoa\": disko gogorreko datu eta partizio guztiak "
-"ezabatu\n"
-"eta Mandrake Linux sistema berriaz ordeztu nahi badituzu, aukeratu hau.\n"
-"Kontuz ibili irtenbide honekin, ezin izango baituzu aukeran atzera egin\n"
-"berretsi ondoren.\n"
-"\n"
-"   !! Aukera hau egiten baduzu, diskoko datu guztiak galdu egingo dira. !!\n"
-"\n"
-" * \"Kendu leihoak\": honek unitateko guztia ezabatuko du eta berriro "
-"hasiko\n"
-"da, denean hasieratik partizioa eginez. Diskoko datu Guztiak galdu egingo\n"
-"dira.\n"
-"\n"
-"   !! Aukera hau egiten baduzu, diskoko datu guztiak galduko dira. !!\n"
-"\n"
-" * \"Aditu modua\": hautatu aukera hau zure disko gogorrean partizioa eskuz\n"
-"egin nahi baduzu. Kontuz - aukera ahaltsua, baina arriskutsua da. Datu\n"
-"guztiak oso erraz gal ditzakezu. Beraz, ez aukeratu hau baldin eta ez\n"
-"badakizu zer egiten ari zaren."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Hortxe duzu. Instalazioa burutu da eta zure GNU/Linux sistema prest duzu\n"
-"erabiltzeko. Sakatu \"Ados\" sistema berrabiarazteko. GNU/Linux edo Windows\n"
-"abiaraz dezakezu, nahiago duzuna (abio bikoitza eginez gero), ordenagailua\n"
-"berrabiarazi bezain laster.\n"
-"\n"
-"\"Aurreratua\" botoiak (Aditu moduan bakarrik) beste bi botoi erakutsiko\n"
-"ditu:\n"
-"\n"
-" * \"auto-instalazioko disketea sortu\": eragile baten laguntzarik gabe\n"
-"oraintsu konfiguratu duzun instalazioaren moduko beste bat automatikoki\n"
-"burutuko duen instalazio-disketea sortzeko.\n"
-"\n"
-"   Kontuan eduki beste bi aukera daudela erabilgarri botoian klik egitean:\n"
-"\n"
-"    * \"Errepikatu\". Hau partzialki automatizatutako instalazioa da,\n"
-"partizio-urratsa (eta hau soilik) interaktibo geratzen denean.\n"
-"\n"
-"    * \"Automatizatua\". Erabat automatizatutako instalazioa: disko gogorra\n"
-"erabat berridazten da, eta datu guztiak galdu egingo dira.\n"
-"\n"
-"   Eginbide hau oso praktikoa da antzeko ordenagailu asko instalatzean. "
-"Ikus\n"
-"Auto instalazioa atala gure web gunean.\n"
-"\n"
-" * \"Gorde pakete-hautapena\"(*) : paketeen hautapena lehen bezala "
-"gordetzen\n"
-"du. Gero, beste instalazio bat egitean, sartu disketea kontrolatzailean eta\n"
-"exekutatu instalazioa [F1] tekla sakatuz eta >>linux defcfg=\"floppy\"<<\n"
-"bidaliz, laguntza- pantailara joanez.\n"
-"\n"
-"(*) FAT formatudun disketea behar duzu (GNU/Linux-en bat sortzeko, idatzi\n"
-"\"mformat a:\")"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Berriki definitutako edozein partizio bere erabilerarako formateatu behar\n"
-"da (formatua emateak fitxategi-sistema sortzea esan nahi du).\n"
-"\n"
-"Une honetan, baliteke lehendik dauden partizio batzuei berriro formatua\n"
-"eman nahi izatea dauzkaten datuak ezabatzeko. Hori egin nahi baduzu,\n"
-"partizio horiek ere hautatu.\n"
-"\n"
-"Kontuan hartu ez dela beharrezkoa lehendik dauden partizioei formatua\n"
-"ematea. Sistema eragilea daukaten partizioei eman behar diezu formatua\n"
-"(esaterako \"/\", \"/usr\" edo \"/var\"), baina ez mantendu nahi dituzun\n"
-"datuak dituztenei (normalki, \"/home\").\n"
-"\n"
-"Kontuz ibili partizioak hautatzean. Formateatu ondoren, hautatutako\n"
-"partizioetako datu guztiak ezabatu egingo dira eta ezin izango duzu bat ere\n"
-"berreskuratu.\n"
-"\n"
-"Sakatu \"Ados\" partizioak formateatzeko prest zaudenean.\n"
-"\n"
-"Sakatu \"Utzi\" Mandrake Linux sistema eragile berriaren instalaziorako\n"
-"beste partizio bat aukeratu nahi baduzu.\n"
-"\n"
-"Sakatu \"Aurreratua\" diskoko bloke okerretarako egiaztatuko diren\n"
-"partizioak hautatzeko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Mandrake Linux sistema eragile berria instalatzen ari zara orain. Zenbat\n"
-"pakete instalatu nahi dituzun eta zure ordenagailuak zein abiadura duen,\n"
-"eragiketa honek minutu batzuk edo denbora-tarte handi samarra beharko\n"
-"izango du.\n"
-"\n"
-"Pazientzia izan."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Mandrake Linux instalatzen duzunean, litekeena da pakete batzuk aldatu\n"
-"izana hasierako argitalpenetik. Beharbada akats batzuk konponduko ziren, \n"
-"eta segurtasun-arazoak gaindituko ziren. Eguneratzeez baliatu ahal izan\n"
-"zaitezen, Internetik deskargatzea gomendatzen dizugu.\n"
-"AUkeratu \"Bai\" Interneteko konexioa martxan badaukazu, edo \"Ez\" pakete\n"
-"eguneratuak geroago instalatu nahi badituzu.\n"
-"\n"
-"\"Bai\" aukeratzen baduzu, eguneratzeak eskaintzen dituzten lekuen "
-"zerrenda \n"
-"azalduko da. Aukeratu zuregandik hurbilen dagoena. Paketeak hautatzeko \n"
-"zuhaitza agertuko da orduan: egin hautapena eta sakatu \"Instalatu\" "
-"hautatutako \n"
-"paketek hartu eta instalatzeko, edo \"Utzi\" abortatzeko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Aurrera jarraitu baino lehen lizentziaren baldintzak arretaz irakurri.\n"
-"Mandrake Linux banaketa osoari dagozkio eta baldintza guztiekin ados ez\n"
-"bazaude, egin klik \"Ezetsi\" botoian; horrela berehala amaituko da\n"
-"instalazioa. Instalazioarekin aurrera jarraitzeko, egin klik \"Ados\"\n"
-"botoian."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Honaino iritsita, ordenagailuarentzat nahi duzun segurtasun-maila\n"
-"aukeratzeko garaia da. Oro har, zenbat eta babesgabeago egon eta zenbat eta\n"
-"funtsezko datu gehiago eduki biltegiratuta, orduan eta segurtasun-maila\n"
-"handiagoa behar da. Segurtasun-maila handiagoa, ordea, erabiltzeko\n"
-"erraztasunaren kalterako izan ohi da. Ikus ``Erreferentziazko\n"
-"eskuliburua''ren MSEC atala maila horien esanahiari buruzko informazio\n"
-"gehiago lortzeko.\n"
-"\n"
-"Zer aukeratu ez badakizu, eutsi aukera lehenetsiari."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Orain, Mandrake Linux sistema instalatzeko zein partizio erabiliko \n"
-"d(ir)en aukeratu behar duzu. Partizioak jadanik definituta badaude, \n"
-"(GNU/Linux-en aurreko instalazio batek edo beste partizio-tresna batek "
-"definituta),\n"
-"lehendik dauden partizioak erabil ditzakezu. Bestela, disko gogorreko\n"
-"partizioak definitu behar dira.\n"
-"\n"
-"Partizioak sortzeko, lehendabizi disko gogor bat hautatu behar duzu. "
-"Partizioa egiteko\n"
-"diskoa hauta dezakezu, \"hda\" sakatuz lehen IDE unitaterako,\n"
-"\"hdb\" bigarrenerako, \"sda\" lehen SCSI unitaterako eta abar.\n"
-"\n"
-"Hautatutako disko gogorraren partizioa egiteko, aukera hauek erabil\n"
-"ditzakezu:\n"
-"    * \"Dena garbitu\": aukera honek hautatutako disko gogorreko partizio "
-"guztiak \n"
-"ezabatzen ditu.\n"
-"\n"
-"    * \"Auto-esleitu\": aukera honekin automatikoki sor ditzakezu Ext2 eta\n"
-"swap partizioak disko gogorreko leku librean.\n"
-"\n"
-"    * \"Gehiago\": eginbide gehiagotarako aukera ematen du:\n"
-"\n"
-"    * \"Gorde partizio-taula\": partizio-taula diskete batean gordetzen du. "
-"Baliagarria\n"
-"de geroago partizio-taula berreskuratzeko, behar izanez gero. Oso "
-"gomendagarria \n"
-"da urrats hau egitea.\n"
-"\n"
-"    * \"Leheneratu partizio-taula\": lehen gordetako partizio-taula\n"
-"disketetik berreskuratzeko erabil daiteke.\n"
-"\n"
-"    * \"Berreskuratu partizio-taula\": partizio-taula hondatuta badago,  \n"
-"berreskuratzen saia zaitezke aukera honen bidez. Kontuz ibili eta gogoan \n"
-"izan huts egin dezakeela.\n"
-"\n"
-"    * \"Birkargatu partizio-taula\": aldaketa guztiak desegin nahi badituzu "
-"eta \n"
-"hasierako partizio-taula kargatu nahi baduzu, aukera hau erabil dezakezu \n"
-"\n"
-"    * \"euskarri aldagarriak automuntatzea\": aukera hau desgaitzen baduzu,  "
-"euskarri \n"
-"aldagarriak (disketeak, CD-ROMak eta horrelakoak) eskuz muntatu eta \n"
-"desmuntatzera behartuko dituzu erabiltzaileak.\n"
-"\n"
-"    * \"Morroia\": erabili aukera hau disko gogorreko partizioa egiteko "
-"morroia\n"
-"erabili nahi baduzu. Partizioak egiten ongi ez badakizu, morroia erabiltzea\n"
-"gomendatzen dizugu.\n"
-"\n"
-"    * \"Desegin\": aukera hau aldaketak bertan behera uzteko erabil "
-"dezakezu.\n"
-"\n"
-"    * \"Eginda\": disko gogorrean partizioak egiten bukatutakoan, aldaketak\n"
-"berriro diskoan gordeko ditu.\n"
-"\n"
-"Oharra: edozein aukera eskura dezakezu teklatuaren bidez. Partizio batetik \n"
-"bestera joateko, [Tab] eta [Gora/Behera] geziak erabil ditzakezu.\n"
-"\n"
-"Partizio bat hautatuta dagoenean, aukera hauek dituzu:\n"
-"\n"
-" * Ktrl-c beste partizio bat sortzeko (partizio huts bat hautatuta "
-"dagoenean);\n"
-"\n"
-" * Ktrl-d partizio bat ezabatzeko;\n"
-"\n"
-" * Ktrl-m muntatze-puntua ezartzeko.\n"
-"\n"
-"Erabil daitezkeen fitxategi-sistema desberdinei buruzko informazioa nahi \n"
-" baduzu, irakurri 'Erreferentzia-eskuliburu'ko ext2fs kapitulua.\n"
-"\n"
-"PPC makina batean instalatu behar baduzu, gutxienez 1 MBko HFS \"bootstrap"
-"\"\n"
-"partizio txiki bat sortu nahi izango duzu, yaboot abioko kargatzaileak\n"
-"erabiliko duena. Partizioa zertxobait handiagoa egitea hautatzen baduzu, "
-"adibidez 50 MBkoa, leku egokia izan daiteke ordezko nukleo bat eta ramdisk \n"
-"imajinak biltegiratzeko emergentziazko abioa egin ahal izateko."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Microsoft Windows partizio bat baino gehiago detektatu da zure disko\n"
-"gogorrean. Aukeratu Mandrake Linux sistema eragile berria instalatzeko\n"
-"tamainaz aldatu nahi duzuna.\n"
-"\n"
-"Partizio bakoitza honela azaltzen da: \"Linux izena\", \"Windows izena\"\n"
-"\"Edukiera\".\n"
-"\n"
-"\"Linux izena\" honela egituratzen da: \"disko gogorraren mota\", \"disko \n"
-"gogorraren zenbakia\", \"partizio-zenbakia\" (adibidez, \"hda1\").\n"
-"\n"
-"\"Disko gogorraren mota\" \"hd\" da zure diskoa IDE disko gogorra bada eta\n"
-"\"sd\" SCSI disko gogorra bada.\n"
-"\n"
-"\"Disko gogorraren zenbakia\" beti \"hd\" edo \"sd\"ren ondoko letra bat \n"
-"izaten da. IDE disko gogorretan:\n"
-"\n"
-" * \"a\"k \"IDE kontroladore primarioko disko gogor nagusia\" esan nahi du,\n"
-"\n"
-"   * \"b\"k \"IDE kontroladore primarioko mendeko disko gogorra\" esan nahi "
-"du,\n"
-"\n"
-" * \"c\"k \"IDE kontroladore sekundarioko disko gogor nagusia\" esan nahi "
-"du,\n"
-"\n"
-" * \"d\"k \"IDE kontroladore sekundarioko mendeko disko gogorra\" esan nahi "
-"du,\n"
-"\n"
-"SCSI disko gogorretan, \"a\" letrak \"SCSI ID baxuena\" esan nahi du, \"b\"\n"
-"letrak \"bigarren SCSI ID baxuena\", etab.\n"
-"\"Windows izena\" Windows-en dagoen disko gogorraren letra da (lehen\n"
-"diskoak edo partizioak \"C:\" du izena)."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Izan pazientzia. Eragiketa honek minutu batzuk beharko ditu."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakXk lehenetsitako instalazioa (\"Gomendatua\") egin nahi duzun edo\n"
-"kontrol handiagoa eduki nahi duzun (\"Aditua\") jakin behar du orain.\n"
-"Gainera, instalazio berri bat egiteko edo lehendik dagoen Mandrake Linux\n"
-"sistema eguneratzeko aukera izango duzu. \"Instalatu\" sakatzen baduzu,\n"
-"sistema zaharra erabat garbituko da. Hautatu \"Bertsio-berritu\" lehendik\n"
-"dagoen sistema baten bertsioa berritzen edo konpontzen ari bazara.\n"
-"\n"
-"Aukeratu \"Instalatu\" Mandrake Linux-en beste bertsiorik ez badago edo\n"
-"hainbat sistema-eragileren artean abiarazi nahi baduzu.\n"
-"\n"
-"Aukeratu \"Eguneratu\" Mandrake Linux-en jadanik instalatutako bertsio bat\n"
-"eguneratu edo konpondu nahi baduzu.\n"
-"\n"
-"GNU/Linux-i buruz dakizunaren arabera, aukeratu ondoko hauetako bat\n"
-"Mandrake Linux sistema eragilea instalatzeko edo eguneratzeko:\n"
-"\n"
-" * Gomendatua: aukeratu hau GNU/Linux sistema eragilea inoiz instalatu ez\n"
-"baduzu. Instalazioa oso erraza izango da eta galdera batzuk besterik ez\n"
-"zaizkizu egingo.\n"
-"\n"
-" * Aditua: GNU/Linux ongi ezagutzen baduzu, instalazio-mota hau aukera\n"
-"dezakezu. Instalazio adituak oso instalazio pertsonalizatua egiteko aukera\n"
-"emango dizu. Galdera batzuei erantzutea zaila izan daiteke GNU/Linux ongi\n"
-"ezagutzen ez baduzu, beraz ez aukeratu hau baldin eta zer egiten ari zaren\n"
-"ez badakizu."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalki, DrakXk teklatu egokia hautatzen dizu (aukeratutako hizkuntzaren\n"
-"arabera) eta urrats hau ez duzu ikusi ere egingo. Dena den, baliteke zure\n"
-"hizkuntzari zehazki dagokion teklatua ez edukitzea: adibidez, ingelesez\n"
-"dakien suitzarra bazara, baliteke hala ere Suitzako teklatua nahi izatea.\n"
-"Edo ingeles hiztuna bazara baina Quebec-en bazaude, egoera berean egon\n"
-"zintezke. Bi kasuetan, instalazio-urrats honetan atzera jo eta teklatu\n"
-"egokia hautatu beharko duzu zerrendan.\n"
-"\n"
-"Egin klik \"Gehiago\" botoian onartzen diren teklatuen zerrenda osoa\n"
-"ikusteko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Aukeratu instalaziorako eta sistemaren erabilerarako hizkuntzarik\n"
-"gogokoena.\n"
-"\n"
-"\"Aurreratua\" botoian klik egiten baduzu, instalaziorako beste hizkuntza\n"
-"batzuk aukeratu ahal izango dituzu lan-estazioan. Beste hizkuntza bat\n"
-"hautatzean, sistemaren dokumentaziorako eta aplikazioetarako fitxategi\n"
-"espezifikoak instalatuko dira. Adibidez, zure ordenagailuan Espainiako\n"
-"erabiltzaileei ostatu eman behar badiezu, zuhaitz-ikuspegian hautatu\n"
-"euskara hizkuntza nagusi gisa, eta Aurreratua atalean, egin klik\n"
-"\"espainiera|Espainia\"ri dagokion izar grisean.\n"
-"\n"
-"Kontuan hartu hizkuntza bat baino gehiago instala daitezkeela. Lokal\n"
-"gehigarriak aukeratutakoan, egin klik \"Ados\" botoian jarraitzeko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Lehenespenez, DrakXk bi botoiko Sagua duzula suposatuko du, eta hirugarren\n"
-"botoia emula dezan konfiguratuko du. DrakXk automatikoki jakingo du sagua\n"
-"PS/2, seriekoa edo USB motakoa den.\n"
-"\n"
-"Beste mota bateko sagua zehaztu nahi baduzu, hautatu dagokion mota\n"
-"zerrendan.\n"
-"\n"
-"Lehenetsitakoa ez den sagu bat aukeratzen baduzu, sagua egiaztatzeko\n"
-"pantailan agertuko zaizu. Erabili botoiak eta gurpila ezarpenak egokiak\n"
-"direla egiaztatzeko. Saguak ez badu behar bezala funtzionatzen, sakatu\n"
-"zuriune-barra edo ITZULI \"Uzteko\", eta aukeratu berriro."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Hautatu ataka zuzena. Adibidez, MS Windows-eko \"COM1\" atakak\n"
-"\"ttyS0\"du izena GNU/Linux-en."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Hau da erabakigunerik funtsezkoena GNU/Linux sistemaren Segurtasunerako:\n"
-"\"root\"-aren pasahitza sartu duzu. \"root\" sistema-administratzailea da\n"
-"eta berak bakarrik dauka eguneratzeko, erabiltzaileak gehitzeko, sistemaren\n"
-"konfigurazio orokorra aldatzeko eta abar egiteko baimena. Bi hitzetan,\n"
-"\"root\"-ak dena egin dezake! Horregatik, asmatzen zaila den pasahitza\n"
-"aukeratu behar duzu - DrakXk errazegia den esango dizu. Ikus dezakezunez,\n"
-"pasahitza ez sartzea ere aukera dezakezu, baina horrelakorik ez egiteko\n"
-"aholkua emango genizuke, arrazoi batengatik: ez pentsa GNU/Linux abiarazi\n"
-"duzulako zure beste sistema eragileek akatsik eduki ezin dutenik.\n"
-"\"root\"-ak muga guztiak gaindi ditzakeenez, eta partizioetan arduragabeki\n"
-"sartuz partizioetako datu guztiak nahi gabe ezaba ditzakeenez,\n"
-"garrantzitsua da \"root\" bilakatzea zaila izatea.\n"
-"\n"
-"Pasahitzak karaktere alfanumerikoen nahasketa izan behar du eta gutxienez 8\n"
-"karaktere izan behar ditu. Ez idatzi inoiz \"root\"-aren pasahitza -\n"
-"sistema errazegi konprometituko bailuke.\n"
-"\n"
-"Dena den, pasahitza ez egin luzeegia, ahalegin handirik gabe gogoratu behar\n"
-"duzulako.\n"
-"\n"
-"Pasahitza ez da idatzi ahala pantailan bistaratuko. Horregatik, pasahitza\n"
-"bi aldiz idatzi beharko duzu, akats tipografikoen aukera murrizteko. Akats\n"
-"tipografiko bera bi aldiz egiten baduzu, pasahitz \"oker\" hori erabili\n"
-"beharko da konektatzen zaren lehen aldian.\n"
-"\n"
-"Aditu moduan, NIS edo LDAP moduko autentifikazio-zerbitzari batekin\n"
-"konektatuko zaren galdetuko zaizu.\n"
-"\n"
-"Zure sareak autentifikaziorako LDAP (edo NIS) protokoloa erabiltzen badu,\n"
-"hautatu \"LDAP\" (edo \"NIS\") autentifikazio gisa. Ezagutzen ez baduzu,\n"
-"galdetu sareko administratzaileari.\n"
-"\n"
-"Zure ordenagailua administratutako ezein sareri konektatua ez badago,\n"
-"beharbada \"Fitxategi lokalak\" aukeratu nahi izango dituzu\n"
-"autentifikaziorako."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO eta GRUB GNU/Linux-en abioko kargatzaileak dira. Etapa hau,normalean,\n"
-"erabat automatizatuta egoten da. Izan ere, DrakXk diskoaren abioko sektorea\n"
-"aztertu eta horren arabera jokatzen baitu, hor aurkitutakoaren arabera:\n"
-"\n"
-" * Windows-en abioko sektorea aurkitzen bada, GRUB/LILO abioko sektore "
-"batez\n"
-"ordeztuko du. Beraz, GNU/Linux edo beste OS bat kargatu ahal izango duzu;\n"
-"\n"
-" * GRUB edo LILO abioko sektore bat aurkitzen bada, berriz ordeztuko du;\n"
-"\n"
-"Zalantzarik badago, DrakXk hainbat aukera duen elkarrizketa-koadroa\n"
-"bistaratuko du.\n"
-"\n"
-" * \"Erabili beharreko abioko kargatzailea\": hiru aukera dituzu:\n"
-"\n"
-"    * \"LILO menu grafikoarekin\": LILO bere interfaze grafikoarekin "
-"nahiago\n"
-"baduzu.\n"
-"\n"
-"    * \"GRUB\": GRUB nahiago baduzu (testu-menua).\n"
-"\n"
-"    * \"LILO testu-menuarekin\": LILO bere testu-menuaren interfazearekin\n"
-"nahiago baduzu.\n"
-"\n"
-" * \"Abioko gailua\": kasu gehienetan, ez duzu (\"/dev/hda\") lehenetsia\n"
-"aldatuko, baina nahiago baduzu, abioko kargatzailea bigarren unitate\n"
-"gogorrean (\"/dev/hdb\") edo diskete batean (\"/dev/fd0\")instala daiteke.\n"
-"\n"
-" * \"Atzeratu lehenetsitako irudia abiarazi baino lehen\": ordenagailua\n"
-"berrabiaraztean, hau da erabiltzaileari aukeratzeko emandako atzerapena -\n"
-"abioko kargatzailearen menuan lehenetsia ez den beste sarrera bat.\n"
-"\n"
-"!! Kontuan eduki abioko kargatzaile bat ez instalatzea aukeratzen baduzu\n"
-"(hemen \"Utzi\" hautatuz), Mandrake Linux sistema abiarazteko bide bat\n"
-"dagoela! Beraz, ziurtatu edozein aukera aldatu baino lehen zer egiten duzun\n"
-"badakizula. !!\n"
-"\n"
-"Elkarrizketa-koadro honetako \"Aurreratua\" botoian klik eginda aukera\n"
-"aurreratu ugari lortuko dituzu, erabiltzaile adituentzat erreserbatuak.\n"
-"\n"
-"Mandrake Linux-ek abioko bere kargatzailea instalatzen du, eta GNU/Linux\n"
-"edo zure sisteman duzun beste edozein sistema eragile abiarazteko aukera\n"
-"emango dizu.\n"
-"\n"
-"Ordenagailuan beste sistema eragile bat instalatuta baduzu, automatikoki\n"
-"gehituko zaio abioko menuari. Hemen, lehendik dauden aukerak optimizatzea\n"
-"hauta dezakezu. Lehendik dagoen sarrera batean klik bikoitza egitean, bere\n"
-"parametroak aldatu edo kendu egingo dituzu; \"Gehitu\"k beste sarrera bat\n"
-"sortzen du; eta \"Eginda\" instalazioaren hurrengo urratsera joaten da."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) eta grub abioko kargatzaileak dira: GNU/Linux edo \n"
-"ordenagailuan dagoen beste edozein sistema eragile abiaraz dezakete.\n"
-" Normalki, beste sistema eragile horiek ongi detektatzen eta instalatzen\n"
-"dira. Horrela ez bada, pantaila honetan sarrera bat eskuz gehi \n"
-"dezakezu. Kontuz ibili parametroak aukeratzean okerrik ez egiteko.\n"
-"\n"
-"Halaber, baliteke beste sistema eragile horietan inori sartzen utzi nahi ez\n"
-"izatea. Horretarako, sistema eragile horien sarrerak ezaba ditzakezu. Baina\n"
-"gero, abioko disko bat beharko duzu beste sistema eragile horiek abiarazteko!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"GNU/Linux-ekin abiarazteko behar den informazioa non kokatu nahi duzun \n"
-"adierazi behar duzu.\n"
-"\n"
-"Zer egiten ari zaren oso ongi ez badakizu, aukeratu \"Unitateko lehen\n"
-"sektorea (MBR)\"."
-
-#: ../../help.pm_.c:729
-#, fuzzy
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Hemen zure ordenagailuaren inprimatzeko sistema hautatuko dugu. Beste\n"
-"SE batzuek bakarra eskainiko dute beharbada, baina Mandrake-k hiru \n"
-"eskaintzen ditu.\n"
-"\n"
-" * \"pdq\" - ``print, don't queue'' esan nahi du, hau da, 'inprimatu, ez "
-"egon\n"
-"ilaran'. Aukera egokia da inprimagailua zuzenean konektatuta baduzu, papera\n"
-"trabatzen denean ohartu nahi baduzu eta sareko inprimagailurik ez baduzu. "
-"Sareko oso kasu\n"
-"sinpleak maneiatuko ditu eta mantso samarra da sarerako. Aukeratu\n"
-"\"pdq\" GNU/Linux-eko zure lehen bidaia bada. Instalazioa egin\n"
-"ondoren aukerak aldatu nahi badituzu, exekutatu Mandrake-ren kontrol-"
-"zentroko\n"
-"PrinterDrake eta egin klik 'aditua' botoian.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'' oso ona da zure inprimagailu\n"
-"lokalean inprimatzeko eta baita munduaren beste aldean ere. Sinplea da eta \n"
-"\"lpd\" inprimatze-sistema zaharraren zerbitzari edo bezero gisa joka "
-"dezake,\n"
-"beraz bateragarria da lehenagoko sistemekin. Gauza asko egin ditzake,\n"
-"baina oinarrizko konfigurazioa \"pdq\" bezain erraza da. \"lpd\" zerbitzari "
-"bat\n"
-"emulatzeko behar baduzu, \"cups-lpd\" daemon-a aktibatu behar duzu. "
-"Inprimagailuaren\n"
-"aukerak hautatzeko edo inprimatzeko interfaze grafikoak ditu.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. Sistema honek\n"
-"besteek egin ditzaketen gauza bertsuak egin ditzake, baina Novell sarean\n"
-"muntatutako inprimagailuetan inprimatuko du, IPX protokoloa onartzen "
-"duelako,\n"
-"eta shell komandoetan zuzenean inprima dezakeelako. Novell behar baduzu "
-"edo \n"
-"hodirik erabili gabe komandoetan inprimatu behar baduzu, erabili lprNG.\n"
-"Bestela, hobe da CUPS, sareetan lan egiteko sinpleagoa eta hobea delako."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX orain zure ordenagailuan dagoen edozein IDE gailu detektatzen ari da.\n"
-"Zure sistemako PCI SCSI txartel bat edo gehiago ere eskaneatuko ditu. SCSI\n"
-"txartela aurkitzen badu, DrakXek automatikoki instalatuko du unitate\n"
-"egokia.\n"
-"\n"
-"Hardwarearen detekzioak batzuetan hardware-elementurik detektatuko ez\n"
-"duenez, DrakXk PCI SCSI txartelik ote dagoen berresteko eskatuko dizu.\n"
-"Sakatu \"Bai\" zure ordenagailuan SCSI txartela instalatuta dagoela\n"
-"badakizu. SCSI txartelen zerrenda bat aurkeztuko zaizu, bertan aukeratzeko.\n"
-"Sakatu \"Ez\" SCSI hardwarerik ez baduzu. Ziur ez bazaude, zure\n"
-"ordenagailuan detektatutako hardware-zerrenda ikus dezakezu \"Ikus\n"
-"hardwareari buruzko informazioa\" hautatuz eta \"Ados\" sakatuz. Aztertu\n"
-"hardware- zerrenda eta egin klik \"Ados\" botoian SCSI interfazearen\n"
-"galderara itzultzeko.\n"
-"\n"
-"Moldagailua eskuz zehaztu baduzu, DrakXk haren aukerak zehaztu nahi dituzun\n"
-"galdetuko dizu. Hardwareak hasieratzeko behar dituen aukera zehatzak bila\n"
-"ditzan, hardwarea aztertzen utzi beharko zenioke DrakXri. Horrek ondo\n"
-"funtzionatu ohi du.\n"
-"\n"
-"DrakXk pasatu behar diren aukerak egiaztatu ezin baditu, aukerak eskuz eman\n"
-"beharko dizkiozu kontrolatzaileari.Eskatutako parametroak\n"
-"frabrikatzailearen web orritik (Interneteko sarbidea baduzu) edo Microsoft\n"
-"Windows-etik (hardware hau zure sisteman Windows-ekin erabili baduzu)\n"
-"berreskuratzeko aholkuak lortzeko, ikus ``Erabiltzailearen gida '' (3.\n"
-"atala, \"Hardwareari buruzko informazioa biltzen\" sekzioa) ."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Sarrera gehiago erants ditzakezu yaboot-entzat, beste sistema eragile\n"
-"batzuk, nukleo alternatiboak edo emergentziazko abioko imajina gehitzeko.\n"
-"\n"
-"Beste SEentzat, etiketa eta erroko partizioa soilik da sarrera.\n"
-"\n"
-"Linux-entzat, hainbat aukera daude:\n"
-"\n"
-" * Etiketa: yaboot-en gonbitean idatzi beharko duzun izena da, abioko\n"
-"aukera hau hautatzeko.\n"
-"\n"
-" * Imajina: abiarazi beharreko nukleoaren izena izango litzateke. Normalki, "
-"vmlinux\n"
-"edo vmlinux-en aldaera bat, luzapen batekin.\n"
-"\n"
-" * Root: zure Linux instalazioaren \"root\" gailua edo \"/\" \n"
-"\n"
-" * Erantsi: Apple hardwarean, nukleoa eransteko aukera bideo-hardwarea "
-"hasieratzen\n"
-"laguntzeko erabiltzen da askotan, edo ohiko Apple saguetan gehienetan\n"
-"falta izaten diren 2. eta 3. botoien emulazioa gaitzeko teklatuan.\n"
-" Hona hemen adibide batzuk:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: aukera hau hasierako moduluak kargatzeko erabil daiteke, abioko\n"
-"gailua erabilgarri egon aurretik, edo ramdisk imajina bat kargatzeko \n"
-"emergentziazko abioa egin behar denean.\n"
-"\n"
-" * Initrd-tamaina: ramdisk-tamaina lehenetsia 4.096 bytekoa izan ohi da. "
-"Ramdisk\n"
-"handi bat esleitu behar baduzu, aukera hau erabil dezakezu.\n"
-"\n"
-" * Irakurri/idatzi: normalki \"root\" partizioa irakurtzeko soilik agertzen "
-"da hasieran,\n"
-"fitxategi-sistemak egiaztatu ahal izateko, sistema \"aktibo\" egin "
-"aurretik.\n"
-"Hemen, aukera hori gainidatz dezakezu.\n"
-"\n"
-" * BideorikEz: Apple bideoaren hardwarea bereziki problematikoa bada,\n"
-"aukera hau hauta dezakezu \"bideorikez\" moduan abiarazteko, jatorrizko\n"
-"frame buffer euskarriarekin.\n"
-"\n"
-" * Lehenetsia: sarrera hau hautatzen du Linux-en hautapen lehenetsi gisa,\n"
-"eta yaboot-en gonbitean SARTU sakatuz hauta daiteke. Sarrera hau\n"
-"\"*\" batez nabarmenduko da, [Tab] sakatzen baduzu abioko hautapenak\n"
-"ikusteko."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"NewWorld MacIntosh hardwarearentzako abioko kargatzaile bat da Yaboot. GNU/"
-"Linux, \n"
-"MacOS, edo MacOSX abiaraz dezake, ordenagailuan badago.\n"
-"Normalean,\n"
-"beste sistema eragile horiek ongi detektatzen eta instalatzen dira. Horrela "
-"ez bada,\n"
-"pantaila honetan sarrera bat eskuz gehi dezakezu. Kontuz ibili\n"
-"parametroak aukeratzean okerrik ez egiteko\n"
-"\n"
-"Yaboot-en aukera nagusiak hauek dira:\n"
-"\n"
-" * Hasierako mezua: abioko gonbitaren aurretik bistaratzen den mezu-testu\n"
-"laburra.\n"
-"\n"
-" * Abioko gailua: adierazi non kokatu nahi duzun GNU/Linux-ekin abiarazteko "
-"behar den\n"
-"informazioa. Normalean, bootstrap partizio bat konfiguratuko duzu lehenago\n"
-"informazio hau edukitzeko.\n"
-"\n"
-" * Open Firmware atzerapena: LILOrekin ez bezala, bi atzerapen daude "
-"erabilgarri\n"
-"yaboot-ekin. Lehen atzerapena segundotan neurtzen da, eta hemen CD, OF "
-"abioa\n"
-"MacOS edo Linux aukera dezakezu.\n"
-"\n"
-" * Nukleoaren abioaren denbora-muga: denbora-muga hau LILOren abioko "
-"atzerapenaren antzekoa da.\n"
-"Linux hautatu ondoren, 0,1 segundoko atzerapen hau izango duzu "
-"lehenetsitako\n"
-"nukleo-deskribapena hautatu aurretik.\n"
-"\n"
-" * Gaitu CDtik abiaraztea?: aukera hau hautatzen baduzu, \"C\" aukeratu ahal "
-"izango\n"
-"duzu CDarentzat abioko lehen gonbitean.\n"
-"\n"
-" * Gaitu OF abioa?: aukera hau hautatzen baduzu, \"N\" aukeratu ahal izango\n"
-"duzu Open Firmware-rentzat abioko lehen gonbitean.\n"
-"\n"
-" * SE lehenetsia: lehenespenez zein SE abiaraziko den hauta dezakezu Open\n"
-"Firmware Atzerapena igarotzen denean."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Hemen zure ordenagailuari dagozkion parametroak aurkezten dira. Zein\n"
-"hardware instalatuta daukazun, ondoko sarrerak ikusiko dituzu - edo ez:\n"
-"\n"
-" * \"Sagua\": egiaztatu saguaren konfigurazioa eta, beharrezkoa bada, egin\n"
-"klik botoian aldatzeko.\n"
-"\n"
-" * \"Teklatua\": egiaztatu une honetako teklatuaren konfigurazioa eta,\n"
-"beharrezkoa bada, egin klik botoian aldatzeko.\n"
-"\n"
-" * \"Ordu-zona\": DrakXk, lehenespenez, aukeratutako hizkuntzatik asmatzen\n"
-"du zure ordu-zona. Baina teklatuaren aukerari dagokionez, baliteke\n"
-"aukeratutako hizkuntzari dagokion herrialdean ez egotea. Horregatik,\n"
-"\"Ordu-zona\" botoian klik egin beharko duzu ordularia zu zauden\n"
-"ordu-zonaren arabera konfiguratzeko.\n"
-"\n"
-" * \"Inprimagailua\": \"Inprimagailurik ez\" botoian klik eginez,\n"
-"inprimagailuaren konfigurazio-morroia irekiko da.\n"
-"\n"
-" * Zure sisteman \"Soinu-txartela\": soinu-txartela detektatzen bada, hemen\n"
-"bistaratuko da. Instalatzean ezin da aldaketarik egin.\n"
-"\n"
-" * \"telebista-txartela\": zure sisteman telebista-txartela detektatzen\n"
-"bada, hemen bistaratuko da. Instalatzean ezin da aldaketarik egin.\n"
-"\n"
-" * \"ISDN txartela\": zure sisteman ISDN txartela detektatzen bada, hemen\n"
-"bistaratuko da. Egin klik botoian dagozkion parametroak aldatzeko."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Aukeratu Mandrake Linux-en partizio berria instalatzeko ezabatu nahi duzun\n"
-"disko gogorra. Kontuz ibili, bertako datu guztiak galdu egingo dira eta "
-"ezin\n"
-"izango dira berreskuratu!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Sakatu \"Ados\" disko gogor honetako datu eta partizio guztiak ezabatu \n"
-"nahi badituzu. Kontuz ibili, \"Ados\" sakatu ondoren, ezin izango duzu \n"
-"disko gogor honetako daturik eta partiziorik berreskuratu,\n"
-"Windows-eko datuak barne.\n"
-"\n"
-"Sakatu \"Utzi\" disko gogor honetako daturik eta partiziorik galdu gabe\n"
-"eragiketa hau bertan behera uzteko."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "%s ere formateatu behar duzu"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Zerbitzari hau(ek) hautatu d(it)uzu: %s\n"
-"\n"
-"\n"
-"Zerbitzari horiek lehenespenez aktibatzen dira. Ez dute segurtasun-arazo "
-"ezagunik,\n"
-"baina berriren bat ager liteke. Kasu horretan, ziurtatu ahal bezain laster\n"
-"eguneratzen duzula.\n"
-"\n"
-"\n"
-"Zerbitzari horiek benetan instalatu nahi dituzu?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Ezin da difusioa erabili NIS domeinurik gabe"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sartu FAT formatuko diskete bat %s unitatean"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Diskete honek ez du FAT formaturik"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Gordetako pakete-hautapen hau erabiltzeko, abiarazi instalazioa ``linux "
-"defcfg=floppy''rekin"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Errorea %s fitxategia irakurtzean"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Zure ordenagailuko hardware batzuek kontrolatzaile ``jabea'' behar dute.\n"
-"Horiei buruzko informazioa hemen aurki dezakezu: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Erroko partizioa eduki behar duzu.\n"
-"Horretarako, sortu partizio bat (edo egin klik lehendik dagoen batean).\n"
-"Gero aukeratu ``Muntatze-puntua'' ekintza eta ezarri `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Swap partizio bat eduki behar duzu"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Ez duzu swap partiziorik\n"
-"\n"
-"Jarraitu hala ere?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "FAT partizio bat eduki behar duzu /boot/efi-n muntatuta"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Erabili leku librea"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ez dago partizio berriak esleitzeko adina leku"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Lehendik dagoen partizioa erabili"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Ez dago erabiltzeko moduko partiziorik"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Erabili Windows partizioa atzera-begiztarako"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Zein partizio erabili nahi duzu Linux4Win-erako?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Aukeratu tamainak"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Erroko partizioaren tamaina MBtan: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Swap partizioaren tamaina MBtan: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Erabili Windows-en partizioko leku librea"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Zein partiziori aldatu nahi diozu tamaina?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Windows fitxategi-sistemaren mugak kalkulatzen"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT tamaina-aldatzaileak ezin du zure partizioa maneiatu, \n"
-"errore hau gertatu da: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Zure Windows partizioa fragmentatuegia dago, exekutatu ``defrag'' lehendabizi"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"KONTUZ!\n"
-"\n"
-"DrakX Windows partizioari tamaina aldatzera doa. Kontuz ibili:\n"
-"eragiketa hau arriskutsua da. Inoiz ez baduzu horrelakorik egin, \n"
-"hobe izango duzu instalaziotik irten eta scandisk exekutatzea \n"
-"Windows-en (eta nahi izanez gero defrag); gero, hasi berriro \n"
-"instalazioarekin. Datuen babeskopia egitea ere komeni da.\n"
-"Ziur zaudenean, sakatu Ados."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Zein tamaina utzi nahi duzu Windows-entzat"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "%s partizioan"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT tamaina-aldaketak huts egin du: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ez dago FAT partiziorik tamainaz aldatzeko edo atzera-begizta gisa "
-"erabiltzeko (edo ez dago nahikoa leku)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Ezabatu disko osoa"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Kendu Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Disko gogor bat baino gehiago duzu, zeinetan instalatuko duzu linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "%s unitatean dauden partizio eta datu GUZTIAK galdu egingo dira"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Disko-partizio pertsonalizatua"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Erabili fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Orain egin dezakezu %s partizioa.\n"
-"Egin ondoren, ez ahaztu `w' erabiliz gordetzea"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Ez duzu behar adina leku libre Windows partizioan"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ezin dut instalatzeko lekurik aurkitu"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Partizio-morroiak irtenbide hauek aurkitu ditu:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partizioak huts egin du: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Sarea irekitzen"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Sarea ixten"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Errore bat gertatu da, baina ez dakit behar bezala maneiatzen.\n"
-"Jarraitu zure ardurapean."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Bikoiztu %s muntatze-puntua"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Pakete garrantzitsu batzuk ez dira behar bezala instalatu.\n"
-"Zure CDROM unitateak edo CDROMak akatsak ditu.\n"
-"Probatu CDROMa ordenagailu instalatu batean \"rpm -qpl Mandrake/RPMS/*.rpm\" "
-"erabiliz.\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Ongi etorri %s(e)ra"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ez dago diskete-unitate erabilgarririk"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "`%s' urratsean sartzen\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Sistemak baliabide gutxi ditu. Arazoak izan ditzakezu Mandrake \n"
-"Linux instalatzeko. Horrela bada, testu-instalazioa egiten saia zaitezke. "
-"Horretarako,\n"
-"sakatu `F1' CDROMetik abiaraztean, gero sartu `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Instalazio-klasea"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Aukeratu instalazio-klase hauetako bat:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Hautatu dituzun taldeen tamaina osoa %d MBkoa da gutxi gorabehera.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Tamaina hori baino gutxiago instalatu nahi,\n"
-"baduzu, hautatu instalatu nahi duzun pakete-portzentajea.\n"
-"\n"
-"Ehuneko txiki batekin pakete garrantzitsuenak soilik instalatuko dira;\n"
-"%% 100 aukeratzen baduzu, hautatutako pakete guztiak instalatuko ditu."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Pakete horien %% %d instalatzeko lekua besterik ez duzu diskoan.\n"
-"\n"
-"Hori baino gutxiago instalatu nahi baduzu,\n"
-"hautatu instalatu nahi duzun pakete-portzentajea.\n"
-"Ehuneko txiki batekin pakete garrantzitsuenak soilik instalatuko ditu;\n"
-"%% %d hautatzen baduzu, ahalik eta pakete gehien instalatuko ditu."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Hurrengo urratsean zehazkiago aukeratu ahal izango dituzu."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Instalatzeko pakete-ehunekoa"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Pakete-taldearen hautapena"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Pakete indibidualen hautapena"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Guztira: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pakete txarra"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Izena: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Bertsioa: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamaina: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Garrantzia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Ezin duzu pakete hori hautatu: ez dago instalatzeko lekurik"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Ondorengo pakete hauek instalatuko dira"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Ondorengo pakete hauek kenduko dira"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Ezin duzu pakete hau hautatu/desautatu"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Nahitaezko paketea da, ezin da desautatu"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ezin duzu pakete hau desautatu. Dagoeneko instalatuta dago"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Pakete hau bertsio-berritu beharrean dago\n"
-"Ziur zaude desautatu nahi duzula?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ezin duzu pakete hau desautatu. Bertsio-berritu egin behar da"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Erakutsi automatikoki hautatutako paketeak"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalatu"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Kargatu/Gorde disketean"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Pakete-hautapena eguneratzen"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Gutxieneko instalazioa"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Aukeratu instalatu nahi dituzun paketeak"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalatzen"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Kalkulatzen"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Geratzen den denbora "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Itxaron, instalazioa prestatzen"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paketeak"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "%s paketea instalatzen"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Onartu"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Ezetsi"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Aldatu CDROMa!\n"
-"\n"
-"Sartu \"%s\" etiketa duen CDROMa unitatean eta sakatu Ados.\n"
-"Ez baduzu, sakatu Utzi instalazioa CDROM horretatik egin ez dezan."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Jarraitu hala ere?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Errore bat izan da paketeak ordenatzean:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Errore bat izan da paketeak instalatzean:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Abisua\n"
-"\n"
-"Irakurri arretaz ondorengo baldintzak. Zerbaitekin ados ez bazaude,\n"
-"ez duzu hurrengo CDa instalatzeko baimenik. Sakatu 'Ezetsi' \n"
-"instalazioa euskarri horiek erabili gabe jarraitzeko.\n"
-"\n"
-"\n"
-"Hurrengo CDko osagai batzuk ez dira GPL Lizentziaren edo\n"
-"antzeko akordioen araberakoak. Osagai horietako bakoitza\n"
-"bere lizentzia zehatzaren baldintzen araberakoa da. \n"
-"Irakurri arretaz lizentzia horiek eta bete bertako baldintzak osagai \n"
-"horiek erabili edo birbanatu aurretik. \n"
-"Lizentzia horiek oro har osagaia transferitzea, bikoiztea (babeskopiak\n"
-"egiteko izan ezik), birbanatzea, ingeniaritza alderantzikatzea, \n"
-"desmihiztatzea, deskonpilatzea edo aldatzea eragotziko dute. \n"
-"Kontratua ez betetzeak lizentzia zehatzak ematen dituen eskubide guztiak \n"
-"kentzea ekarriko du berehala. Baldin eta lizentzia zehatzaren baldintzek "
-"eskubidea ematen\n"
-"ez badizute, normalki ezin izango dituzu programak sistema batean baino\n"
-"gehiagotan instalatu, edo sarean erabiltzeko egokitu. Zalantzarik baduzu, "
-"jarri harremanetan\n"
-"osagaiaren banatzailearekin edo editorearekin zuzenean. \n"
-"Osagai horiek hirugarrenei transferitzea edo kopiatzea, dokumentazioa\n"
-"barne, debekatuta egoten da normalki.\n"
-"\n"
-"\n"
-"Hurrengo CDko osagaiei dagozkien eskubide guztiak haien egileenak \n"
-"dira eta software-programei aplikatzen zaizkien jabetza \n"
-"intelektualaren eta copyright-aren legeek babesten dituzte.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Errore bat izan da"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Ziur zaude instalazioa bertan behera utzi nahi duzula?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lizentzia-kontratua"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Sarrera\n"
-"\n"
-"Mandrake Linux banaketako sistema eragileari eta erabilgarri dauden osagaiei "
-"\"Software-produktuak\"\n"
-"deituko zaie aurrerantzean. Software-produktuetan sartzen dira, besteak \n"
-"beste, Mandrake Linux banaketako sistema eragileari eta osagaiei dagozkien "
-"programak, \n"
-"metodoak, arauak eta dokumentazioa.\n"
-"\n"
-"\n"
-"1. Lizentzia-kontratua\n"
-"\n"
-"Irakurri arretaz dokumentu hau. Dokumentu hau zure eta MandrakeSoft S.A.ren "
-"arteko lizentzia-kontratu bat da,\n"
-"Software-produktuei dagokiena.\n"
-"Software-produktuak instalatu, bikoiztu edo era batean edo bestean erabiliz, "
-"esplizituki \n"
-"onartzen dituzu eta erabateko adostasuna adierazten diezu Lizentzia honen "
-"baldintzei. \n"
-"Lizentziaren zatiren batekin ados ez bazaude, ez duzu baimenik izango "
-"Software-produktuak instalatu, \n"
-"bikoiztu edo erabiltzeko. \n"
-"Software-produktuak Lizentzia honekin bat ez datorren moduan instalatu, "
-"bikoiztu edo erabiltzeko \n"
-"saio oro deuseza izango da eta Lizentziari dagozkion eskubideak amaitu "
-"egingo \n"
-"dira. Lizentzia amaitzean, Software-produktuen kopia guztiak berehala "
-"suntsitu \n"
-"behar dituzu.\n"
-"\n"
-"\n"
-"2. Berme mugatua\n"
-"\n"
-"Software-produktuak eta erantsitako dokumentuak \"dauden-daudenean\" ematen "
-"dira, bermerik gabe, \n"
-"legeak onartzen duen neurrian.\n"
-"MandrakeSoft S.A.k ez du, ezein kasutan eta legeak onartzen duen neurrian, "
-"erantzukizunik izango\n"
-"Software-produktuen erabileraren edo erabiltzeko ezgaitasunaren ondorioz "
-"sortutako kalte berezi, ustekabeko,\n"
-"zuzeneko edo zeharkakoengatik (lana galtzea, lana etetea, finantza-galera, "
-"epai baten ondorioz ordaindu \n"
-"beharreko kuotak eta zigorrak edo beste edozein ondoriozko galera barne, "
-"mugarik gabe), \n"
-"MandrakeSoft S.A. jakinaren gainean egon arren halako kalteak gerta "
-"litezkeela.\n"
-"\n"
-"HERRIALDE BATZUETAN SOFTWARE DEBEKATUA EDUKITZEARI EDO ERABILTZEARI LOTUTAKO "
-"ERANTZUKIZUN MUGATUA\n"
-"\n"
-"Legeak onartzen duen neurrian, MandrakeSoft S.A.k edo bere banatzaileek, ez "
-"dute, ezein kasutan,\n"
-"erantzukizunik izango herrialde batzuetan, bertako legeek debekatutako edo "
-"mugatutako software-osagaiak edo\n"
-"Mandrake Linux-en guneetatik deskargatutako software-osagaiak eduki eta "
-"erabiltzearen ondorioz \n"
-"sortutako kalte berezi,ustekabeko,zuzeneko edo zeharkakoengatik (lana "
-"galtzea, lana etetea,\n"
-"finantza-galera, epai baten ondorioz ordaindu beharreko kuotak eta zigorrak "
-"edo beste edozein ondoriozko \n"
-"galera barne, mugarik gabe).\n"
-"Erantzukizun mugatu hau Software-produktuetan sartzen diren kriptografia "
-"handiko osagaiei aplikatzen \n"
-"zaie, baina ez da horietara mugatzen.\n"
-"\n"
-"\n"
-"3. GPL Lizentzia eta Lizentzia erlazionatuak\n"
-"\n"
-"Software-produktuak hainbat pertsonak edo erakundek sortutako osagaiak dira. "
-"Osagai \n"
-"horietako gehienak aurrerantzean\"GPL\" deituko diogun GNU Lizentzia Publiko "
-"Orokorraren\n"
-"edo antzeko lizentzien baldintzen araberakoak dira. Lizentzia horietako "
-"gehienek, \n"
-"beren osagaiak bikoizteko, egokitzeko edo birbanatzeko aukera ematen dute. "
-"Osagai bat erabili aurretik, irakurri \n"
-"arretaz osagai horren lizentzia-kontratuko baldintzak.  Osagaiaren "
-"lizentziari\n"
-"buruzko galdera oro osagaiaren egileari egin beharko zaio, eta ez "
-"MandrakeSoft-i.\n"
-"MandrakeSoft S.A.k garatutako programak GPL Lizentziaren araberakoak dira. "
-"MandrakeSoft S.A.k\n"
-"idatzitako dokumentazioa lizentzia zehatz baten araberakoa da. Xehetasun "
-"gehiago nahi izanez gero, \n"
-"jo dokumentaziora.\n"
-"\n"
-"\n"
-"4. Jabetza intelektualaren eskubideak\n"
-"\n"
-"Software-produktuen osagaiei dagozkien eskubide guztiak haien \n"
-"egileenak dira eta software-programei\n"
-"aplikatzen zaizkien jabetza intelektualaren eta copyriht-aren legeek "
-"babesten dituzte.\n"
-"MandrakeSoft S.A.k eskubidea du Software-produktuak bere osotasunean edo "
-"zatika aldatzeko, \n"
-"bide guztiak erabiliz eta helburu guztietarako.\n"
-"\"Mandrake\", \"Mandrake Linux\" eta asoziatutako logotipoak MandrakeSoft S."
-"A.ren marka erregistratuak dira  \n"
-"\n"
-"\n"
-"5. Lege arautzaileak \n"
-"\n"
-"Kontratu honen edozein zati epai batek deuseztzat, legez kanpokotzat edo "
-"aplikaezintzat jotzen badu, \n"
-"zati hori kendu egingo da kontratutik. Kontratuaren gainerako atal "
-"aplikagarriek ezarritakoa \n"
-"bete behar duzu.\n"
-"Lizentzia honetako baldintzak Frantziako legeen araberakoak dira.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teklatua"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Aukeratu zure teklatu-diseinua."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Hona hemen teklatu erabilgarri guztien zerrenda"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Zein instalazio-klase nahi duzu?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalatu/Eguneratu"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Zer egin nahi duzu: instalazioa ala eguneratzea?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Gomendatua"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Aditua"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Bertsio-berritu"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Paketeak bakarrik bertsio-berritu"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Aukeratu sagu-mota."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Sagu-ataka"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Aukeratu sagua konektatuta dagoen serieko ataka."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Botoien emulazioa"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "2. botoiaren emulazioa"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "3. botoiaren emulazioa"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA txartelak konfiguratzen..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE konfiguratzen"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ez dago partizio erabilgarririk"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Partizioak eskaneatzen muntatze-puntuak aurkitzeko"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Aukeratu muntatze-puntuak"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ezin dut zure partizio-taula irakurri, hondatuegia dago :(\n"
-"Jarraitzen saia naiteke, partizio txarrak garbituz (DATU GUZTIAK galduko "
-"dira!).\n"
-"Beste irtenbidea DrakXri partizio-taula aldatzeko baimenik ez ematea da.\n"
-"(errorea %s da)\n"
-"\n"
-"Ados zaude partizio guztiak galtzearekin?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake-k ezin izan du partizio-taula behar bezala irakurri.\n"
-"Jarraitu zure ardurapean!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Ez dago lekurik 1 MBko bootstrap-a sortzeko! Instalazioak jarraituko du, "
-"baina zure sistema abiarazteko, bootstrap partizioa sortu beharko duzu "
-"DiskDrake-rekin"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Ez da erroko partiziorik aurkitu bertsio-berritzea egiteko"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Erroko partizioa"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Zein da zure sistemaren (/) erroko partizioa?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Berrabiarazi egin behar duzu partizio-taulako aldaketek eragina izateko"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Aukeratu formateatu nahi dituzun partizioak"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Bloke txarrak egiaztatu?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Partizioak formateatzen"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s fitxategia sortzen eta formateatzen"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Ez dago nahikoa swap instalazioa burutzeko, gehitu egin beharko duzu"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Pakete erabilgarriak bilatzen"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Bertsio-berritzeko paketeak bilatzen"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Zure sistemak ez du nahikoa leku instalatzeko edo bertsio-berritzeko (%d > %"
-"d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Osoa (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Gutxienekoa (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Gomendatua (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Aukeratu pakete-hautapena disketean kargatzea edo gordetzea.\n"
-"Formatua instalazio automatikoa egiteko sortutako disketeena bezalakoa da."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Disketetik kargatu"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Disketetik kargatzen"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Pakete-hautapena"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Sartu pakete-hautapena daukan diskete bat"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Gorde disketean"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Hautatutako tamaina handiagoa da leku erabilgarria baino"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Instalazio-mota"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Ez duzu talde edo paketerik hautatuta\n"
-"Nahi duzun gutxieneko instalazioa hautatu behar duzu"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Xrekin"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Oinarrizko dokumentazioarekin (gomendatua)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Instalazio minimo-minimoa (batez ere, urpmi gabe)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Beheko zerrendako CD guztiak badituzu, sakatu Ados.\n"
-"CD horietako bat ere ez baduzu, sakatu Utzi.\n"
-"CDetako batzuk soilik falta badituzu, desauta itzazu, eta sakatu Ados."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" etiketadun CDROMa"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Instalazioa prestatzen"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"%s paketea instalatzen\n"
-"%% %d"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Instalazio-ondorengo konfigurazioa"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sartu abioko disketea %s unitatean"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sartu moduluak eguneratzeko disketea %s unitatean"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Enkriptatzeko softwarea deskargatzeko aukera duzu orain.\n"
-"\n"
-"ABISUA:\n"
-"\n"
-"Software horiei aplika dakizkiekeen eta hainbat jurisdikziok ezartzen "
-"dituzten eskakizun \n"
-"orokor desberdinak direla eta, software horien bezeroek edo/eta azken "
-"erabiltzaileek \n"
-"segurtatu beharko dute beren jurisdikzioko legeek baimena ematen dutela "
-"softwareok \n"
-"deskargatzeko, biltegiratzeko edo/eta erabiltzeko.\n"
-"\n"
-"Gainera, bezeroek edo/eta azken erabiltzaileek bereziki arduratu behar dute "
-"beren\n"
-"jurisdikzioko legeak ez urratzeaz. Bezeroek edo/eta azken erabiltzaileek\n"
-"lege aplikagarri horiek xedatutakoa betetzen ez badute, zigor handiak "
-"jasoko\n"
-"dituzte.\n"
-"\n"
-"Ezein kasutan, Mandrakesoft-ek eta bere fabrikatzaileek edo/eta banatzaileek "
-"ez dute\n"
-"erantzukizunik izango bezeroak edo/eta azken erabiltzaileak kontratu hau\n"
-"sinatu ondoren eskuratutako softwareak erabiltzearen, edukitzearen edo \n"
-"deskargatze hutsaren ondorioz sortutako kalte berezi, zeharkako edo "
-"ustekabekoengatik \n"
-"(hala nola, irabaziak galtzea, lana etetea, datu komertzialak galtzea\n"
-"eta bestelako diru-galerak eta epai baten erabakiari jarraiki ordaindu\n"
-"beharreko erantzukizunak eta kalte-ordainak, besteak beste).\n"
-"\n"
-"\n"
-"Kontratu honi buruzko edozein kontsulta egiteko, jarri harremanetan\n"
-"Mandrakesoft, Inc.-ekin\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Banaketa erabilgarri izan ondoren kaleratutako pakete eguneratuak\n"
-"deskargatzeko aukera duzu.\n"
-"\n"
-"Segurtasun eta akatsen konponketak hartuko dituzu, baina Interneteko\n"
-"konexio bat behar duzu konfiguratuta, aurrera jarraitzeko.\n"
-"\n"
-"Eguneratze horiek instalatu nahi dituzu?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Mandrake Linux-en web gunearekin kontaktatzen ispiluen zerrenda lortzeko"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Aukeratu ispilu bat paketeak bertatik hartzeko"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Ispiluarekin kontaktatzen pakete erabilgarrien zerrenda lortzeko"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Zein da zure ordu-zona?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardwarearen ordua GMTn ezarria"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Ordu-sinkronizazio automatikoa (NTP erabiliz)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Zerbitzaria"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Urruneko CUPS zerbitzaria"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Inprimagailurik ez"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "ISA soinu-txartela duzu?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Instalazioa egindakoan, exekutatu \"sndconfig\" soinu-txartela "
-"konfiguratzeko "
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Ez da soinu-txartelik detektatu. Instalazioa egin ondoren, saiatu \"harddrake"
-"\"rekin "
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Laburpena"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Sagua"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Ordu-zona"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Inprimagailua"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN txartela"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Soinu-txartela"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Telebista-txartela"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Fitxategi lokalak"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Ezarri root-aren pasahitza"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Pasahitzik ez"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Pasahitz hau sinpleegia da (gutxienez %d karaktere izan behar ditu)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentifikazioa"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP autentifikazioa"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP basea dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Zerbitzaria"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS Autentifikazioa"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS domeinua"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS zerbitzaria"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Abioko disko pertsonalizatuak Linux sistema abiarazteko aukera ematen du\n"
-"abioko kargatzaile normala erabili gabe. Baliagarria da zure sisteman SILO\n"
-"instalatu nahi ez baduzu, edo beste sistema eragile batek SILO kentzen badu, "
-"edo SILOk\n"
-"zure hardware-konfigurazioarekin funtzionatzen ez badu. Abioko disko "
-"pertsonalizatua Mandrake\n"
-"berreskuratzeko imajinarekin ere erabil daiteke, sistemaren hutsegite "
-"larriak\n"
-"errazago gainditu ahal izateko.\n"
-"\n"
-"Zure sistemarako abioko disko bat sortu nahi baduzu, sartu diskete bat "
-"lehen\n"
-"unitatean eta sakatu \"Ados\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Lehen diskete-unitatea"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Bigarren diskete-unitatea"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Saltatu"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Abioko disko pertsonalizatuak Linux sistema abiarazteko aukera ematen du\n"
-"abioko kargatzaile normala erabili gabe. Baliagarria da zure sisteman LILO "
-"(edo grub)\n"
-"instalatu nahi ez baduzu, edo beste sistema eragile batek LILO kentzen badu, "
-"edo LILOk\n"
-"zure hardware-konfigurazioarekin funtzionatzen ez badu. Abioko disko "
-"pertsonalizatua Mandrake\n"
-"berreskuratzeko imajinarekin ere erabil daiteke, sistemaren hutsegite "
-"larriak\n"
-"errazago gainditu ahal izateko.\n"
-"Zure sistemarako abioko disko bat sortu nahi duzu?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(KONTUZ! XFS erabiltzen ari zara erroko partizioan,\n"
-"abioko diskoa 1,44 Mb-ko disketean sortzeak huts egingo du\n"
-"seguru asko, XFSk oso kontrolatzaile handia behar duelako)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Ez dago diskete-unitate erabilgarririk"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Aukeratu abioko diskoa egiteko erabili nahi duzun diskete-unitatea"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Sartu diskete bat %s unitatean"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Abioko disketea sortzen"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Abioko kargatzailea prestatzen"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Badirudi makina zaharra edo ezezaguna duzula,\n"
-"yaboot abioko kargatzaileak ez du funtzionatuko.\n"
-"Instalazioak jarraitu egingo du, baina\n"
-"BootX erabili beharko duzu makina abiarazteko"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "aboot erabili nahi duzu?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Errorea aboot instalatzean, \n"
-"instalazioa ezartzen saiatu lehen partizioa suntsitzen badu ere?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Abioko kargatzailea instalatzen"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Abioko kargatzailea instalatzeak huts egin du. Errore hau gertatu da:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Baliteke Open Firmware abioko gailua aldatu behar izatea\n"
-" abioko kargatzailea gaitzeko.  Berrabiaraztean abioko kargatzailearen "
-"gonbita ez\n"
-" baduzu ikusten, eduki sakatuta Command-Option-O-F abiaraztean eta sartu:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Gero, idatzi: shut-down\n"
-"Hurrengo abiaraztean abioko kargatzailearen gonbita ikusi behar duzu."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sartu diskete huts bat %s unitatean"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Auto-instalazioko disketea sortzen"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Urrats batzuk ez dira osatu.\n"
-"\n"
-"Ziur zaude orain irten nahi duzula?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Zorionak, instalazioa burutu da.\n"
-"Atera abioko diskoa eta sakatu itzulera-tekla berrabiarazteko.\n"
-"\n"
-"\n"
-"Mandrake Linux-en bertsio honetarako erabilgarri dauden konponbideen "
-"informaziorako,\n"
-"kontsultatu Erratak helbide honetan:\n"
-"\n"
-"\n"
-"http://www.mandrakelinux.com/.\n"
-"\n"
-"\n"
-"Zure sistema konfiguratzeko informazioa Mandrake-ren Erabiltzailearen \n"
-"Gida Ofizialeko instalatu ondorengo azalpenei buruzko kapituluan duzu."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Sortu auto-instalazioko disketea"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Auto-instalazioa erabat automatiza daiteke nahi izanez gero,\n"
-"kasu horretan, disko gogorra hartuko du!!\n"
-"(beste makina batean instalatzeko pentsatua da aukera hau).\n"
-"\n"
-"Beharbada nahiago izango duzu instalazioa errepikatzea.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizatua"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Errepikatu"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Gorde pakete-hautapena"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux-en %s instalazioa"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> elementuz aldatzeko  | <Zuriunea> hautatzeko | <F12> hurr. "
-"pantaila"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu falta da"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "consolehelper falta da"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Aukeratu fitxategi bat"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Aurreratua"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Oinarrizkoa"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Itxaron"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informazioa"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Zabaldu zuhaitza"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Tolestu zuhaitza"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Txandakatu alfabetikoaren eta taldeka ordenatuaren artean"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Aukera okerra, saiatu berriro\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Zure aukera? (%s lehenetsia) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Zuk bete beharreko sarrerak:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Zure aukera? (0/1, lehenetsia `%s' da) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "`%s' botoia : %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Botoi honetan klik egin nahi duzu?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Zure aukera? (lehenetsia: `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Hainbat gauza dituzu aukeran (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Aukeratu editatu nahi duzun 10 barrutiko lehen zenbakia,\n"
-"edo sakatu Sartu, jarraitzeko.\n"
-"Zure aukera? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Kontuz, etiketa bat aldatu da:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Berriro bidali"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "txekiarra (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "alemana"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "espainiarra"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "finlandiarra"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "frantsesa"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "norvegiarra"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "poloniarra"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "errusiarra"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "suediarra"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Erresuma Batuko teklatua"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Estatu Batuetako teklatua"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "albaniarra"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "armeniarra (zaharra)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "armeniarra (idazmakina)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "armeniarra (fonetikoa)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "azerbaijandarra (latinoa)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "belgikarra"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "bulgariarra (fonetikoa)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "bulgariarra (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "brasildarra (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "bielorrusiarra"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "suitzarra (diseinu alemana)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "suitzarra (diseinu frantsesa)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "txekiarra (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "alemana (letra zaharkiturik ez)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "daniarra"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (Estatu Batuak)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (norvegiarra)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (suediarra)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "estoniarra"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "georgiarra (diseinu \"errusiarra\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "georgiarra (diseinu \"latinoa\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "grekoa"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "hungariarra"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "kroaziarra"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "israeldarra"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "israeldarra (fonetikoa)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "iraniarra"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "islandiarra"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "italiarra"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "japoniarra 106 tekla"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreako teklatua"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "latinamerikarra"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituaniako AZERTY (zaharra)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituaniako AZERTY (berria)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituaniako QWERTY \"ilara numerikoa\""
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituaniako QWERTY \"fonetikoa\""
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "letoniarra"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "mazedoniarra"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "holandarra"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "poloniarra (qwerty diseinua)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "poloniarra (qwertz diseinua)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "portugesa"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "kanadarra (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "errumaniarra (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "errumaniarra (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "errusiarra (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "esloveniarra"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "eslovakiarra (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "eslovakiarra (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "serbiarra (zirilikoa)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "tamila"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thailandiako teklatua"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajikistango teklatua"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "turkiarra (tradizionala \"F\" modeloa)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "turkiarra (modernoa \"Q\" modeloa)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "ukrainarra"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Estatu Batuetako teklatua (nazioartekoa)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "vietnamdarra QWERTY \"ilara numerikoa\""
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "jugoslaviarra (latinoa)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Eskuineko Alt tekla"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Bi Maius teklak batera"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Kontrol eta Maius teklak batera"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "BlokMaius tekla"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ktrl eta Alt teklak batera"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt eta Maius teklak batera"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "\"Menu\" tekla"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Ezkerreko \"Windows\" tekla"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Eskuineko \"Windows\" tekla"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "%s muntaketa zirkularrak\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Kendu bolumen logikoak lehendabizi\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "PCMCIA euskarririk ez dago 2.2 nukleoentzat. Erabili 2.4 nukleoa."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Sagua"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Gurpildun PS2 sagu generikoa"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking sagua"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 botoi"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "2 botoiko sagu generikoa"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generikoa"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Gurpila"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriekoa"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "3 botoiko sagu generikoa"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech sagua (seriekoa, C7 mota zaharrekoa)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "bus-sagua"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 botoi"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botoi"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "bat ere ez"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Sagurik gabe"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Probatu sagua"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Sagua aktibatzeko,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MUGITU GURPILA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Amaitu"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Hurrengoa ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Aurrekoa"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Zuzena da?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Konektatu Internetekin"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"adsl-rekin konektatzeko modurik ohikoena pppoe da.\n"
-"Konexio batzuek pptp erabiltzen dute, bakan batzuek dhcp.\n"
-"Ez badakizu, aukeratu 'erabili pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "erabili dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "erabili pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "erabili pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Zein dhcp bezero erabili nahi duzu?\n"
-"Lehenetsia dhcpcd da"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Zure sisteman ez da ethernet sare-moldagailurik detektatu.\n"
-"Ezin dut konexio-mota hau konfiguratu."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Aukeratu sare-interfazea"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Aukeratu zein sare-moldagailu erabili nahi duzun Internetera konektatzeko"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ez da sare-txartelik aurkitu"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Sarea konfiguratzen"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Sartu zure ostalari-izena, baldin badakizu.\n"
-"DHCP zerbitzari batzuek ostalari-izena behar dute funtzionatzeko.\n"
-"Ostalari-izenak osoa izan behar du, erabat kualifikatua,\n"
-"esate baterako, ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Ostalari-izena"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Sarea konfiguratzeko morroia"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Kanpoko ISDN modema"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Barneko ISDN txartela"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Nolakoa da zure ISDN konexioa?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Zein ISDN konfigurazio duzu nahiago?\n"
-"\n"
-"* Konfigurazio zaharrak isdn4net erabiltzen du. Tresna ahaltsuak\n"
-"  dauzka, baina korapilatsua da konfiguratzeko, eta ez da estandarra.\n"
-"\n"
-"* Konfigurazio berria errazagoa da ulertzeko, estandarragoa,\n"
-"  baina tresna gutxiago ditu.\n"
-"\n"
-"Konfigurazio erraza gomendatzen dugu.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Konfigurazio berria (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Konfigurazio zaharra (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN konfigurazioa"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Hautatu hornitzailea.\n"
-" Zerrendan ez badago, aukeratu Zerrendatu gabe"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europako protokoloa"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europako protokoloa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Munduko gainerako protokoloa"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Munduko gainerako protokoloa \n"
-" D kanalik ez (linea alokatuak)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Zein protokolo erabili nahi duzu?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Nolako txartela duzu?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ez dakit"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"ISA txartela baduzu, hurrengo pantailako balioek zuzenak izan behar dute.\n"
-"\n"
-"PCMCIA txartela baduzu, txartelaren irq eta io jakin behar dituzu.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abortatu"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Jarraitu"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Zein da zure ISDN txartela?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ISDN PCI txartel bat detektatu dut, baina ez dakit zein motatakoa den. "
-"Hautatu PCI txartel bat hurrengo pantailan."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ez da ISDN PCI txartelik aurkitu. Hautatu bat hurrengo pantailan."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Aukeratu modema konektatuta dagoen serieko ataka."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Telefonoz deitzeko aukerak"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Konexio-izena"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefono-zenbakia"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Saio-hasierako ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Script-ean oinarritua"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminalean oinarritua"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domeinu-izena:"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Lehen DNS zerbitzaria (aukerakoa)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Bigarren DNS zerbitzaria (aukerakoa)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Deskonektatu egin zaitezke edo konexioa birkonfiguratu."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Konexioa birkonfigura dezakezu."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Orain Internetekin konektatuta zaude."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Internetekin konekta zaitezke, edo konexioa birkonfiguratu."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Orain ez zaude Internetekin konektatuta."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Konektatu"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Deskonektatu"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Konfiguratu konexioa"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Interneteko konexioa eta konfigurazioa"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "%s konexioa konfiguratuko dugu orain."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"%s konexioa konfiguratuko dugu orain.\n"
-"\n"
-"\n"
-"Jarraitzeko, sakatu Ados."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Sare-konfigurazioa"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Sare-instalazioa egiten ari zarenez, zure sarea konfiguratuta dago jadanik.\n"
-"Hautatu Ados zure konfigurazioa mantentzeko, edo hautatu Utzi Internet eta "
-"Sare-konexioa birkonfiguratzeko.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Ongi etorri Sarea konfiguratzeko morroira\n"
-"\n"
-"Zure Internet/sare-konexioa konfiguratzera goaz.\n"
-"Ez baduzu auto-detekzioa erabili nahi, desautatu kontrol-laukia.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Aukeratu konfiguratzeko profila"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Erabili auto-detekzioa"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Gailuak detektatzen..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Modem-konexio normala"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "%s atakan detektatua"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN konexioa"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s detektatua"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL konexioa"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "%s interfazean detektatua"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kable-konexioa"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "kable bidezko konexioa detektatu da"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Sare lokaleko konexioa (LAN)"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet txartela(k) detektatuta"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Aukeratu konfiguratu nahi duzun konexioa"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Internetera konektatzeko modu bat baino gehiago konfiguratu duzu.\n"
-"Aukeratu erabili nahi duzuna.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Interneteko konexioa"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Abioan hasi nahi duzu konexioa?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Sare-konfigurazioa"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Sarea berrabiarazi egin behar da"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Arazo bat izan da sarea berrabiaraztean: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Zorionak, sarearen eta Interneten konfigurazioa amaitu da.\n"
-"\n"
-"Konfigurazioa zure sistemari aplikatuko zaio orain.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Ondoren, zure X ingurunea berrabiaraztea gomendatzen dugu,\n"
-"ostalari-izena aldatzearen arazoa saihesteko."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Arazoak izan dira konfigurazioan zehar.\n"
-"Probatu konexioa net_monitor edo mcc bidez. Konexioak funtzionatzen ez badu, "
-"konfigurazioa berrabiarazi beharko duzu"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ABISUA: Gailu hau Internetera konektatzeko konfiguratu da aldez aurretik.\n"
-"Gailu hau konfiguratuta mantentzeko, onartu, besterik gabe.\n"
-"Ondoko eremuak aldatzen badituzu konfigurazio hau gainidatziko da."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Sartu makina honen IP konfigurazioa.\n"
-"Elementu bakoitza IP helbide gisa sartu behar da puntuz\n"
-"bereizitako zenbakizko notazioan (adibidez, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Sareko %s gailua konfiguratzen"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (%s kontrolatzailea)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP helbidea"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Sare-maskara"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP automatikoa"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP helbideak 1.2.3.4 formatua izan behar du"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Sartu zure ostalari-izena.\n"
-"Ostalari-izenak osoa izan behar du, erabat kualifikatua,\n"
-"esate baterako, ``mybox.mylab.myco.com''.\n"
-"Atebidearen IP helbidea ere sar dezakezu, baldin baduzu"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS zerbitzaria"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Atebidea (adib. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Atebide-gailua"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxy-en konfigurazioa"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy-a"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy-a"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Sare-txartelaren identifikazioa (eramangarrientzat baliagarria)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy-ak http://... izan behar du"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy-ak ftp://... izan behar du"
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Interneteko konfigurazioa"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Internetera orain konektatu nahi duzu?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Konexioa probatzen..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sistema Internetera konektatuta dago orain."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Segurtasun-arrazoiengatik, deskonektatu egingo da orain."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Badirudi sistema ez dagoela Internetera konektatuta.\n"
-"Saiatu konexioa birkonfiguratzen."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konexioaren konfigurazioa"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Bete edo egiaztatu ondoko eremua"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Txartelaren IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Txartelaren mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Txartelaren S/I"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Txartelaren S/I_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Txartelaren S/I_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Zure telefono-zenbakia"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Hornitzailearen izena (adib. hornitzailea.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Hornitzailearen telefono-zenbakia"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Hornitzailearen dns 1 (aukerakoa)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Hornitzailearen dns 2 (aukerakoa)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Aukeratu zure herrialdea edo estatua"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Markatzeko modua"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Konexioaren abiadura"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Konexioaren denbora-muga (segundotan)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Kontuaren identifikatzailea (erabiltzaile-izena)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Kontuaren pasahitza"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "muntatzeak huts egin du: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Partizio hedatua ez da plataforma honetan onartzen"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Hutsune bat duzu partizio-taulan baina ezin dut erabili.\n"
-"Irtenbide bakarra lehen mailako partizioak mugitzea da, hutsunea partizio "
-"hedatuen ondoren gera dadin"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Huts egin du %s fitxategitik leheneratzean: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Babeskopia txarra"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Errorea %s fitxategian idaztean"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Okerren bat gertatzen ari da zure unitatean. \n"
-"Datuen osotasuna egiaztatzeko probak huts egin du. \n"
-"Horrek esan nahi du, diskoan ezer idazten bada, zaborra sortuko dela ausaz"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ezinbestekoa"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "garrantzitsua"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "oso baliagarria"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "baliagarria"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "beharbada"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR  Belaunaldi berrikoa"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue (Inprimatu, ez egon ilaran)"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Inprimagailu lokala"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Urruneko inprimagailua"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Urruneko CUPS zerbitzariko inprimagailua"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Urruneko lpd zerbitzariko inprimagailua"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Sareko inprimagailua (TCP/socket-a)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT zerbitzariko inprimagailua"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "NetWare zerbitzariko inprimagailua"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Adierazi inprimagailuaren URI bat"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Kanalizatu lana komando batean"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Modelo ezezaguna"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Inprimagailu lokalak"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Urruneko inprimagailuak"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " - \\/*%s ataka paraleloan"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", \\/*%s USB inprimagailua"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", funtzio anitzeko gailua \\/*%s ataka paraleloan"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", funtzio anitzeko gailua - USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", funtzio anitzeko gailua - HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", funtzio anitzeko gailua"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", %s(e)n inprimatzean"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr " - \"%s\" LPD zerbitzaria, \"%s\" inprimagailua"
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", \"%s\" TCP/IP ostalaria, %s ataka"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr " - \"%s\" Windows zerbitzaria, \"%s\" konpartitzea"
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr " - \"%s\" Novell zerbitzaria, \"%s\" inprimagailua"
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", %s komandoaren bidez"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Inprimagailu gordina (kontrolatzailerik ez)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(%s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(makina honetan)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "\"%s\" CUPS zerbitzarian"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (lehenetsia)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Hautatu inprimagailu-konexioa"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Nola dago konektatuta inprimagailua?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Urruneko CUPS zerbitzariko inprimagailuak ez dituzu hemen konfiguratu behar; "
-"horrelako inprimagailuak automatikoki detektatuko dira."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPSen konfigurazioa"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Zehaztu CUPS zerbitzaria"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Sare lokaleko urruneko CUPS zerbitzarietarako sarbidea izateko, ez daukazu "
-"ezer konfiguratu beharrik; CUPS zerbitzariek automatikoki emango diote zure "
-"makinari beren inprimagailuen berri. Zure makinak ezagutzen dituen "
-"inprimagailu guztiak Printerdrake-ren leiho nagusiko \"Urruneko "
-"inprimagailuak\" ataleko zerrendan daude. CUPS zerbitzaria zure sarelokalean "
-"ez badago, CUPS zerbitzariaren IP helbidea eman behar duzu, eta nahi baduzu "
-"atakaren zenbakia, zerbitzaritik inprimagailuaren informazioa eskuratzeko; "
-"bestela, utzi eremu hauek hutsik."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalean, CUPS automatikoki konfiguratzen da sare-ingurunearen\n"
-"arabera, sare lokaleko CUPS zerbitzarietako inprimagailuetara\n"
-"iritsi ahal izan zaitezen. Horrek ez badu ondo funtzionatzen, \n"
-"desaktibatu \"CUPS konfigurazio automatikoa\" eta editatu\n"
-"/etc/cups/cupsd.conf fitxategia eskuz. Ez ahaztu gero CUPS\n"
-"berrabiaraztea (komandoa: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP helbideak honelako itxura izan behar du: 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Ataka-zenbakiak osoko zenbakia izan behar du!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS zerbitzariaren IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Ataka"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "CUPS konfigurazio automatikoa"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Gailuak detektatzen..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Probatu atakak"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Gehitu inprimagailu berria"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Ongi etorri inprimagailua instalatzeko morroira\n"
-"\n"
-"Morroi honen bidez, ordenagailuan erabil daitezkeen inprimagailu urruneko "
-"edo lokalak instalatzeko laguntza jasoko duzu, baita saretik instalatzeko "
-"ere.\n"
-"\n"
-"Inprimagailua instalatzeko behar duen informazioa eskatuko dizu eta "
-"inprimagailu-kontrolatzaile, kontrolatzaile-aukera eta konexio-mota "
-"erabilgarri guztiak jarriko ditu zure esku."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Inprimagailu lokala"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Ongi etorri inprimagailuak instalatzeko morroira\n"
-"\n"
-"Morroi honen bidez, ordenagailuarekin konektatutako inprimagailuak "
-"instalatzeko laguntza jasoko duzu.\n"
-"\n"
-"Konektatu inprimagailua ordenagailuarekin eta piztu ezazu. Aurrera "
-"jarraitzeko, egin klik \"Hurrengoa\"n, eta instalazioa bertan behera uzteko "
-"egin klik \"Utzi\"n .\n"
-"\n"
-"Ordenagailu batzuk kraskatu egin daitezke inprimagailuen auto-detekzioan, "
-"desaktibatu \"Automatikoki detektatu inprimagailuak\", auto-detekzioa ez "
-"erabiltzeko. Erabili \"Aditu modua\" PrinterDrake-n, urruneko inprimagailu "
-"batean inprimatzea konfiguratu nahi baduzu eta zerrendan agertzen ez bada."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Automatikoki detektatu inprimagailuak"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Zorionak, inprimagailua instalatuta eta konfiguratuta duzu!\n"
-"\n"
-"Inprimatzeko, aplikazioko \"Inprimatu\" komandoa erabil dezakezu (normalean "
-"\"Fitxategia\" menuan izan ohi da).\n"
-"\n"
-"Inprimagailu bat gehitu, kendu, edo izenez aldatu nahi baduzu, edo ezarpen "
-"lehenetsiak (paper-iturria, inprimatze-kalitatea...) aldatu nahi badituzu, "
-"hautatu \"Inprimagailua\" Mandrake Kontrol Zentroko \"Hardwarea\" atalean."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Inprimagailuen detekzio automatikoa"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake-k lokalki konektatutako paraleloko edo USB inprimagailuak "
-"detekta ditzake automatikoki, baina sistema batzuetan auto-detekzioak "
-"BLOKEATU ETA HONDATU EGIN DITZAKE FITXATEGI-SISTEMAK! Beraz, ZUREA DA "
-"ARRISKUAREN ARDURA!\n"
-"\n"
-"Inprimagailuak automatikoki detektatu nahi dituzu?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Egin auto-detekzioa"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Ezarri inprimagailua eskuz"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "%s detektatua"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "\\/*%s ataka paraleloko inprimagailua"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "\\/*%s USB inprimagailua"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Ez da inprimagailu lokalik aurkitu! Inprimagailua eskuz instalatzeko, idatzi/"
-"gailu/fitxategi izena (Ataka paraleloak: /dev/lp0, /dev/lp1, ..., "
-"baliokideak dira LPT1:, LPT2:..., lehen USB inprimagailua: /dev/usb/lp0, "
-"bigarren USB inprimagailua: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Gailua edo fitxategi-izena adierazi behar duzu!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Ez da inprimagailu lokalik aurkitu!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Sareko inprimagailuak soilik instalazioaren ondoren instala daitezke. "
-"Hautatu \"Hardwarea\" eta gero \"Inprimagailuak\" Mandrake Kontrol Zentroan."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Sareko inprimagailuak inprimatzeko, hautatu \"Utzi\", hautatu \"Aditu modua"
-"\", eta egin klik \"Gehitu inprimagailu berria\" aukeran berriro."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Inprimagailu hau detektatu da automatikoki, zuk konfiguratu nahi duzuna ez "
-"bada, idatzi gailuaren izena/fitxategi-izena"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Automatikoki detektatutako inprimagailuen zerrenda da hau. Hautatu "
-"konfiguratu nahi duzuna edo idatzi gailuaren izena/fitxategi-izena"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Inprimagailu hau detektatu da automatikoki. Inprimagailuaren konfigurazioa "
-"automatikoki egingo da. Inprimagailua ondo detektatu ez bada edo nahiago "
-"baduzu konfigurazio pertsonalizatua, aldatu \"Eskuzko konfigurazioa"
-"\"aukerara."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Automatikoki detektatutako inprimagailuen zerrenda da hau. Hautatu "
-"konfiguratu nahi duzuna. . Inprimagailuaren konfigurazioa zeharo "
-"automatikoki egingo da. Inprimagailua ondo detektatu ez bada edo nahiago "
-"baduzu konfigurazio pertsonalizatua, hautatu \"Eskuzko konfigurazioa\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Hautatu inprimagailua konektatuta dagoen ataka edo idatzi gailuaren izena/"
-"fitxategi-izena"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Aukeratu inprimagailua konektatuta dagoen ataka."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Ataka paraleloak: /dev/lp0, /dev/lp1..., baliokideak dira LPT1:, LPT2:..., "
-"lehen USB inprimagailua: /dev/usb/lp0, 2. USB inprimagailua: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Inprimagailua/gailua aukeratu/adierazi behar duzu!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Eskuzko konfigurazioa"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Zure inprimagailua funtzio anitzeko HP gailua da (OfficeJet, PSC, "
-"PhotoSmart, LaserJet 1100/1200/1220/3200/3300 eskanerrarekin)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "HPOJ paketea instalatzen..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Gailua egiaztatzen eta HPOJ konfiguratzen..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "SANE paketea instalatzen..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Funtzio anitzeko HP gailuan eskaneatzen"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Inprimagailu-ataka CUPSerako erabilgarri egiten..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Inprimagailuaren datu-basea irakurtzen..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Urruneko lpd inprimagailuaren aukerak"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Urruneko lpd inprimagailua erabiltzeko, inprimagailu-zerbitzariaren "
-"ostalari-\n"
-"izena eta zerbitzari horretako inprimagailu-izena eman behar dituzu."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Urruneko ostalari-izena"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Urruneko inprimagailu-izena"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Urruneko ostalari izena falta da!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Urruneko inprimagailu-izena falta da!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) inprimagailuaren aukerak"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"SMB inprimagailuan inprimatzeko, SMB ostalari-izena eman behar duzu (Oharra! "
-"Baliteke TCP/IP ostalari-izena desberdina izatea!) eta beharbada inprimaketa-"
-"zerbitzariaren IP helbidea eta baita atzitu nahi duzun inprimagailuaren "
-"konpartitze-izena eta erabiltzaile-izenak, pasahitzak eta lantalde-"
-"informazioa ere."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB zerbitzariaren ostalaria"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB zerbitzariaren IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Konpartitze-izena"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Lantaldea"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Zerbitzari-izena edo zerbitzariaren IP eman behar da!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Samba konpartitze-izena falta da!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare inprimagailuaren aukerak"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"NetWare inprimagailuan inprimatzeko, NetWare inprimaketa-zerbitzariaren "
-"izena eman behar duzu (Oharra! baliteke bere TCP/IP ostalari-izena "
-"desberdina izatea!) eta baita atzitu nahi duzun inprimagailuaren inprimaketa-"
-"ilararen izena eta erabiltzaile-izenak eta pasahitzak ere."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Inprimagailu-zerbitzaria"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Inprimaketa-ilararen izena"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP zerbitzari-izena falta da!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP ilara-izena falta da!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket inprimagailuaren aukerak"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Socket inprimagailuan inprimatzeko, inprimagailuaren ostalari-izena\n"
-"eman behar duzu eta, nahi baduzu, ataka-zenbakia. HP JetDirect "
-"zerbitzarietan ataka-zenbakia normalki 9100 izaten da, beste zerbitzari "
-"batzuetan aldatu egin daiteke. Begiratu zure hardwarearen eskuliburuan."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Inprimagailuaren ostalari-izena"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Inprimagailuaren ostalari izena falta da!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Inprimagailuaren URIa"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Inprimagailua atzitzeko URIa zuzenean zehatz dezakezu. URIak CUPS edo "
-"Foomatic zehaztapenak bete behar ditu. Kontuan izan spooler guztiek ez "
-"dituztela URI mota guztiak onartzen."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Baliozko URI bat sartu behar da!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Inprimagailu bakoitzak izen bat behar du (adibidez \"inprimagailua\"). "
-"Azalpenaren eta Kokalekuaren eremuak ez dira nahitaez bete behar. "
-"Erabiltzaileentzako iruzkinak dira."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Inprimagailuaren izena"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Azalpena"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Kokalekua"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Inprimagailuaren datu-basea prestatzen..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Zure inprimagailu-modeloa"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake-k inprimagailua auto-detektatzean lortutako modelo-izena "
-"inprimagailuen datu-basean dituen modeloekin konparatu du, egokiena "
-"aurkitzeko. Aukera okerrekoa izan daiteke, batez ere zure inprimagailua ez "
-"bada azaltzen datu-baseko zerrendan. Beraz, begiratu aukera egokia den eta, "
-"hala bada, egin klik \"Modeloa zuzena da\"n, bestela, egin klik \"Hautatu "
-"modeloa eskuz\"en hurrengo pantailara joan eta modeloa eskuz hautatzeko.\n"
-"\n"
-"Hau aurkitu du Printerdrake-k zure inprimagailuarentzat:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Modeloa zuzena da"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Hautatu modeloa eskuz"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Inprimagailu-modeloaren hautapena"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Zein inprimagailu-modelo daukazu?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Begiratu Printerdrake-k ondo detektatu duen automatikoki zure inprimagailu-"
-"modeloa. Bilatu modelo egokia zerrendan kurtsorea okerreko modeloan edo  "
-"\"Inprimagailu gordinean\" badago."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Zure inprimagailua ez badago zerrendan, aukeratu bateragarria (ikus "
-"inprimagailuaren eskuliburua) edo antzekoa den bat "
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter-en konfigurazioa"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"OKI laser winprinter inprimagailua konfiguratzen ari zara. Inprimagailu "
-"horiek oso komunikazio-protokolo berezia erabiltzen dute eta beraz "
-"paraleloko lehen atakara konektatuta soilik funtzionatzen dute. "
-"Inprimagailua beste ataka batera edo inprimaketa-zerbitzari batera "
-"konektatuta badago, konektatu inprimagailua paraleloko lehen atakarekin "
-"probako orria inprimatu aurretik. Bestela, inprimagailuak ez du "
-"funtzionatuko. Zure konexio-motaren ezarpena ez du kontuan hartuko "
-"kontrolatzaileak."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet inprimagailuaren konfigurazioa"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Lexmark-en Inkjet inprimagailu-kontrolatzaileek inprimagailu lokalak soilik "
-"onartzen dituzte, ez urruneko makinetako inprimagailuak edo inprimaketa-"
-"zerbitzariak. Konektatu zure inprimagailua ataka lokal batera edo konfigura "
-"ezazu konektatuta dagoen makinan."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Lexmark inkjet-ekin eta konfigurazio honekin inprimatu ahal , izateko, "
-"Lexmark-ek emandako inkjet inprimagailu-kontrolatzaileak behar dituzu "
-"(http://www.lexmark.com/). Joan Estatu Batuetako gunera eta egin klik "
-"\"Drivers\" botoian. Gero aukeratu modeloa eta ondoren \"Linux\" sistema "
-"eragile gisa. Kontrolatzaileak RPM pakete gisa edo instalazio grafiko "
-"interaktiboa duten shell script gisa egoten dira. Ez da beharrezkoa "
-"konfigurazio hau interfaze grafikoen bidez egitea. Ezeztatu zuzenean "
-"lizentzia-kontratuaren ondoren. Gero inprimatu inprimatze-burua lerrokatzeko "
-"orriak \"lexmarkmaintain\"ekin eta doitu burua lerrokatzeko ezarpenak "
-"programa honekin."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Inprimagailuaren ezarpen lehenetsiak\n"
-"\n"
-"Ziurtatu orri-tamaina eta tinta-mota/inprimatzeko modua (erabilgarri badago)"
-"eta laser inprimagailuaren hardware-konfigurazioa zuzen ezarri direla. "
-"Kontuan hartu inprimatzeko kalitatea oso handia bada askoz mantsoago "
-"inprimatuko duela segurutik."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "%s aukerak osoko zenbakia izan behar du!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "%s aukerak zenbakia izan behar du!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "%s aukera barrutitik kanpo dago!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Inprimagailu hau (\"%s\")\n"
-"lehenetsi nahi duzu?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Proba-orriak"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Hautatu inprimatu nahi dituzun proba-orriak.\n"
-"Kontuan hartu: argazkien proba-orriak denbora asko behar izan dezake "
-"inprimatzeko, eta memoria gutxiko laser inprimagailuetan baliteke ez "
-"ateratzea ere. Gehienetan nahikoa izaten da proba-orri estandarra "
-"inprimatzea."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Proba-orririk ez"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Inprimatu"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Proba-orri estandarra"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Proba-orri alternatiboa (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Proba-orri alternatiboa (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Argazkien proba-orria"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Ez inprimatu proba-orririk"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Proba-orria(k) inprimatzen..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Proba-orria(k) inprimagailura bidali dira.\n"
-"Denbora pixka bat igaro liteke inprimatzen hasi arte.\n"
-"Inprimatze-egoera:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Proba-orria(k) inprimagailura bidali dira.\n"
-"Denbora pixka bat igaro liteke inprimatzen hasi arte.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Ongi egin du?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Inprimagailu \"gordina\""
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Fitxategi bat komando-lerrotik (terminal-leihoa) inprimatzeko, \"%s "
-"<fitxategia>\" komandoa edo inprimatze-tresna grafiko bat erabil dezakezu: "
-"\"xpp <fitxategia>\" edo \"kprinter <fitxategia>\". Tresna grafikoak "
-"inprimagailua hautatzeko eta aukeren ezarpenak erraz aldatzeko erabiltzen "
-"dira.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Komando horiek aplikazio askotako inprimatze-elkarrizketetako \"Inprimatzeko "
-"komandoa\" eremuan erabil ditzakezu ere, baina hor ez eman fitxategi-izena, "
-"inprimatu behar den fitxategia aplikazioak ematen baitu.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"\"%s\" komandoaren bidez ere alda daitezke inprimatze-lan jakin baten aukera-"
-"ezarpenak. Gehitu nahi dituzun ezarpenak komando-lerroari, adib. \"%s "
-"<fitxategia>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Uneko inprimagailuak dituen aukerak ezagutzeko, irakurri ondoko zerrenda edo "
-"egin klik \"Inprimatzeko aukeren zerrenda\" botoian.%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Hemen duzu inprimagailu honen inprimatzeko aukeren zerrenda:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Fitxategi bat komando-lerrotik (terminal-leihoa) inprimatzeko, erabili \"%s "
-"<fitxategia>\" komandoa.\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Komando hau aplikazio askotako inprimatze-elkarrizketetako \"Inprimatzeko "
-"komandoa\" eremuan ere erabil dezakezu. Baina hor ez eman fitxategi-izena, "
-"inprimatu behar den fitxategia aplikazioak ematen baitu.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Uneko inprimagailuaren aukera erabilgarrien zerrenda eskuratzeko, egin klik "
-"\"Inprimatzeko aukeren zerrenda\" botoian."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Fitxategi bat komando-lerrotik (terminal-leihoa) inprimatzeko, erabili \"%s "
-"<fitxategia>\" komandoa edo \"%s <fitxategia>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"\"xpdq\" interfaze grafikoa ere erabil dezakezu aukerak ezartzeko eta "
-"inprimatze-lanak maneiatzeko.\n"
-"KDE erabiltzen baduzu mahaigaineko ingurune gisa, \"estualdi-botoi\" bat "
-"egongo da, \"GELDITU inprimagailua!\" dioena, eta inprimatze-lan guztiak "
-"berehala etengo ditu bertan klik egitean. Papera trabatzen denean eta "
-"horrelakoetan erabili ohi da.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"\"%s\" eta \"%s\" komandoen bidez inprimatze-lan baten aukera-ezarpenak alda "
-"daitezke. Aski da nahi diren ezarpenak komando-lerroan gehitzea, adib.: \"%s "
-"<fitxategia>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Itxi"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "\"%s\": inprimatzen/eskaneatzen"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "\"%s\" inprimagailuan inprimatzen"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Inprimatzeko aukeren zerrenda"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Funtzio anitzeko HP gailua automatikoki konfiguratuta dago eskaneatzeko. "
-"Orain \"scanimage\"rekin eskanea dezakezu (\"scanimage -d hp:%s\" eskanerra "
-"zehazteko, bat baino gehiago badituzu) komando-lerrotik edo \"xscanimage\" "
-"edo \"xsane\" interfaze grafikoekin. GIMP erabiltzen baduzu, \"File\"/"
-"\"Acquire\" menuko puntu egokiaren bidez ere eskanea dezakezu. Informazio "
-"gehiago nahi baduzu, idatzi \"man scanimage\" eta \"man sane-hp\" komando-"
-"lerroan.\n"
-"\n"
-"Ez erabili \"scannerdrake\" gailu honekin!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Funtzio anitzeko HP gailua automatikoki konfiguratuta dago eskaneatzeko. "
-"Orain komando-lerrotik eskanea dezakezu \"ptal-hp %s scan ...\"ekin. Zure "
-"gailuak ez du onartzen interfaze grafikoaren edo GIMPen bidez eskaneatzea. "
-"Informazio gehiago, sistemako \"/usr/share/doc/hpoj-0.8/ptal-hp-scan.html\" "
-"fitxategian aurkituko duzu. HP LaserJet 1100 edo 1200 baldin  baduzu, "
-"eskanerraren aukera instalatuta daukazunean bakarrik eskaneatu ahal izango "
-"duzu.\n"
-"\n"
-"Ez erabili \"scannerdrake\" gailu honekin!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Inprimagailu-datuak irakurtzen..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Transferitu inprimagailu-konfigurazioa"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"%s spooler-erako egin duzun inprimagailu-konfigurazioa %s spooler-era (uneko "
-"spooler-era) kopia dezakezu. Konfigurazio-datu guztiak (inprimagailuaren "
-"izena, azalpena, kokalekua, \n"
-"konexio-mota eta aukera-ezarpenak lehenetsiak) hartuko ditu, baina lanak ez "
-"dira transferituko.\n"
-"Ilara guztiak ezin dira transferitu, ondorengo arrazoiak direla eta:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPSek ez ditu onartzen Novell zerbitzarietako inprimagailuak edo datuak "
-"libre osatutako komando batean bidaltzen dituztenak.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQk inprimagailu lokalak, urruneko LPD inprimagailuak eta Socket/TCP "
-"inprimagailuak soilik onartzen ditu.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPDk eta LPRng-ek ez dute IPP inprimagailurik onartzen.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Gainera, programa honen edo \"foomatic-configure\"ren bidez sortu ez diren "
-"ilarak ezin dira transferitu."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Halaber, fabrikatzaileek emandako PPD fitxategiekin edo jatorrizko CUPS "
-"kontrolatzaileekin konfiguratutako inprimagailuak ezin dira transferitu."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Markatu transferitu nahi dituzun inprimagailuak eta sakatu\n"
-"\"Transferitu\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Ez transferitu inprimagailuak"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Transferitu"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"\"%s\" izeneko inprimagailu bat badago %s(e)n. \n"
-"Sakatu \"Transferitu\" gainidazteko.\n"
-"Beste izen bat idatz dezakezu, edo inprimagailu hori saltatu."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Inprimagailu-izenak letrak, zenbakiak eta azpimarra soilik eduki behar ditu"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"\"%s\" inprimagailua badago lehendik ere,\n"
-"bere konfigurazioa gainidatzi nahi duzu?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Inprimagailu-izen berria"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s transferitzen..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Zure lehengo inprimagailu lehenetsia (\"%s\") transferitu duzu, Inprimagailu "
-"lehenetsia izan behar du %s inprimatze-sistema berrian ere?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Inprimagailuaren datuak freskatzen..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Urruneko inprimagailu baten konfigurazioa"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Sarea abiarazten ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Konfiguratu sarea orain"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Sare-funtzionalitatea ez dago konfiguratuta"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Urruneko inprimagailu bat konfiguratzera zoaz. Sarerako sarbidea behar duzu "
-"horretarako, baina sarea konfiguratu gabe dago. Aurrera jarraitzen baduzu "
-"sarea konfiguratu gabe, ezin izango duzu orain konfiguratzen ari zaren "
-"inprimagailua erabili. Zer egin nahi duzu?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Jarraitu sarea konfiguratu gabe"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Instalazioan egindako sare-konfigurazioa ezin da abiarazi orain. "
-"Berrabiarazi sistema eta begiratu ea sarean sartzen zaren eta, ondoren, "
-"zuzendu konfigurazioa Mandrake Kontrol Zentroko \"Sarea eta Internet\"/"
-"\"Konexioa\" atalean, eta gero konfiguratu inprimagailua, Mandrake Kontrol "
-"Zentroan bertan, \"Hardwarea\"/\"Inprimagailua\" atalean."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Sarerako sarbidea ez dago martxan eta ezin da abiarazi. Begiratu "
-"konfigurazioa eta hardwarea ondo dauden. Gero saiatu berriro urruneko "
-"inprimagailua konfiguratzen."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Inprimatze-sistema berrabiarazten ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "handia"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoidea"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Inprimatze-sisteman segurtasun-maila %s instalatzen"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"%s inprimatze-sistema segurtasun-maila %sn dabilen sisteman instalatzera "
-"zoaz.\n"
-"\n"
-"Inprimatze-sistema honek inprimatze-lanei itxaroteko eta lanak maneiatzeko "
-"daemon (atzeko planoko prozesu) bat exekutatzen du. Daemon hori urruneko "
-"makinek ere atzitu dezakete sarearen bitartez eta hala, erasoak jasateko "
-"gunea izan daiteke. Beraz, daemon hautatu bakan batzuk besterik ez dira "
-"abiarazten lehenespenez segurtasun-maila honetan.\n"
-"\n"
-"Makina honetan konfiguratu nahi duzu inprimaketa?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Abioan inprimatze-sistema abiarazi"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"(%s) inprimatze-sistema ez da automatikoki hasiko makina abiarazten denean.\n"
-"\n"
-"Baliteke abiarazte automatikoa desaktibatuta egotea segurtasun-maila "
-"handiagora aldatu delako, eta inprimatze-sistema eraso-gune potentziala "
-"delako.\n"
-"\n"
-"Inprimatze-sistema automatikoki hastea berriro aktibatu nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Instalatutako softwarea egiaztatzen..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "LPRng kentzen..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "LPD kentzen..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Hautatu inprimagailuaren spooler-a"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Zein inprimatze-sistema (spooler) erabili nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "\"%s\" inprimagailua konfiguratzen..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Foomatic instalatzen ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Inprimagailuaren aukerak"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "PrinterDrake prestatzen..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Aplikazioak konfiguratzen..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Inprimaketa konfiguratu nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Inprimatze-sistema: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Ondoko inprimagailuak daude konfiguratuta. Egin klik bikoitza inprimagailu "
-"batean ezarpenak aldatzeko; inprimagailua lehenesteko; informazioa ikusteko; "
-"edo urruneko CUPS zerbitzari bateko inprimagailu bat Star Office/OpenOffice."
-"org-rentzat erabilgarri egiteko."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Ondoko inprimagailuak daude konfiguratuta. Ezarpenak aldatzeko, inprimagailu "
-"bat lehenesteko edo informazioa ikusteko, egin klik bikoitza inprimagailu "
-"batean."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Freskatu inprimagailu-zerrenda (urruneko CUPS inprimagailuak ikusteko)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Aldatu inprimatzeko sistema"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modu normala"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Beste inprimagailu bat konfiguratu nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Aldatu inprimagailuaren konfigurazioa"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"%s inprimagailua\n"
-"Zer da inprimagailu honetan aldatu nahi duzuna?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Egin!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Inprimagailuaren konexio-mota"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Inprimagailuaren izena, azalpena, kokalekua"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Inprimagailuaren fabrikatzailea, modeloa, kontrolatzailea"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Inprimagailuaren fabrikatzailea, modeloa"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Ezarri inprimagailu hau lehenetsi gisa"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Gehitu inprimagailu hau Star Office/OpenOffice.org-n"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Kendu inprimagailu hau Star Office/OpenOffice.org-tik"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Inprimatu proba-orriak"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Ikasi inprimagailua erabiltzen"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Kendu inprimagailua"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "\"%s\" inprimagailu zaharra kentzen..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Inprimagailu lehenetsia"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "\"%s\" inprimagailua lehenetsi gisa ezarri da orain."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Star Office/OpenOffice.org-n inprimagailua gehitzen"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"\"%s\" inprimagailua behar bezala gehitu da Star Office/OpenOffice.org-n."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-"Huts egin du \"%s\" inprimagailua Star Office/OpenOffice.org-n gehitzean."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Inprimagailua Star Office/OpenOffice.org-tik kentzen"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"\"%s\" inprimagailua behar bezala kendu da Star Office/OpenOffice.org-tik."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-"Huts egin du \"%s\" inprimagailua Star Office/OpenOffice.org-tik kentzean."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "\"%s\" inprimagailua kendu nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "\"%s\" inprimagailua kentzen..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy-konfigurazioa"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Ongi etorri proxy-a konfiguratzeko utilitatera.\n"
-"\n"
-"Hemen zure http eta ftp proxy-ak konfiguratu ahal izango\n"
-"dituzu, erabiltzaile-izenarekin eta pasahitzarekin edo gabe.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Bete http proxy-aren datuak\n"
-"Utzi hutsik ez baduzu http proxy-rik nahi"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URLa"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "ataka"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URLaren hasieran 'http:' jarri behar du"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Atakaren zatiak zenbakizkoa izan behar du"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Bete ftp proxy-aren datuak\n"
-"Utzi hutsik ez baduzu ftp proxy-rik nahi"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URLaren hasieran 'ftp:' jarri behar du"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Sartu proxy-aren erabiltzaile-izena eta pasahitza, baldin badago.\n"
-"Utzi hutsik ez baduzu erabiltzaile-izen/pasahitzik nahi"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "erabiltzaile-izena"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "pasahitza"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "idatzi pasahitza berriro"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Pasahitzak ez datoz bat. Saiatu berriro!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ezin zaio partizio bat gehitu RAID md%d-ri (formateatuta dago)"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ezin da %s fitxategia idatzi"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid-ek huts egin du"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid-ek huts egin du (beharbada raid-tresnak faltako dira?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ez dago nahikoa partizio %d RAID mailarako\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Abiarazi ALSA (Advanced Linux Sound Architecture) soinu-sistema"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, komando-antolatzaile periodikoa."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd bateriaren egoera kontrolatzeko eta syslog-en jasotzeko erabiltzen\n"
-"da. Bateria gutxi dagoenean makina itzaltzeko ere erabil daiteke."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"at komandoaren bidez programatutako komandoak exekutatzen ditu at \n"
-"exekutatzean zehaztutako orduan, eta batch komandoak exekutatzen ditu \n"
-"batezbesteko karga nahikoa baxua denean."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron UNIX programa estandar bat da, erabiltzaileak zehaztutako programak\n"
-"programatutako orduan exekutatzen dituena. vixie cron-ek hainbat eginbide \n"
-"gehitzen dizkio oinarrizko UNIX cron-i, hala nola segurtasun hobea eta "
-"konfigurazio-aukera ahaltsuagoak."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPMk saguaren euskarria gehitzen die Midnight Commander bezalako\n"
-"testuan oinarritutako Linux aplikazioei. Halaber kontsolan saguaren bidez "
-"ebaki eta itsasteko aukera ematen du eta laster-menuen euskarria eransten du."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake-k hardware-proba bat exekutatzen du eta nahi izanez \n"
-"gero hardware berria/aldatua konfiguratzen du."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache World Wide Web-eko zerbitzari bat da. HTML fitxategiak eta CGI "
-"zerbitzatzeko erabili ohi da."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneteko superzerbitzariaren daemon-ak (normalki inetd deitua) beste\n"
-"hainbat Internet-zerbitzu abiarazten ditu, behar izan ahala. Zerbitzu asko "
-"abiarazten ditu,\n"
-"hala nola telnet, ftp, rsh, eta rlogin. inetd desgaitzean bere ardurapeko\n"
-"zerbitzu guztiak desgaitzen dira."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Abiarazi Linux-nukleoen 2.2 serieko pakete-iragazketa, zure \n"
-"makina sareko erasoetatik babesteko suebaki bat ezartzeko."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Pakete honek hautatutako teklatu-mapa kargatzen du\n"
-"/etc/sysconfig/keyboard fitxategian ezarritakoaren arabera.  kbdconfig "
-"utilitatearen bidez hauta daiteke teklatu-mapa.\n"
-"Zerbitzu hau gaituta uztea komeni da makina gehienetan."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Nukleoaren goiburukoaren birsortze automatikoa /boot-en\n"
-"honentzat: /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Hardwarea automatikoki detektatu eta konfiguratzea abioan."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf-ek batzuetan hainbat ataza egiten ditu abioan\n"
-"sistemaren konfigurazioa mantentzeko."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd inprimaketako daemon-a da. Beharrezkoa da lpr-k ondo funtziona\n"
-"dezan. Inprimatze-lanak inprimagailu(eta)ra esleitzen dituen zerbitzaria da."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux-en Zerbitzari Birtuala, performantzia handiko zerbitzari oso\n"
-"erabilgarria eraikitzeko erabiltzen da."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) domeinu-izenen zerbitzari bat (DNS) da, ostalari-izenak ebatzi "
-"eta IP helbide bihurtzeko erabiltzen dena."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Network File System (NFS), SMB (Lan Manager/Windows), eta NCP \n"
-"(NetWare) muntatze-puntu guztiak muntatu eta desmuntatzen ditu."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Abioan hasteko konfiguratuta dauden sare-interfaze guztiak\n"
-"aktibatzen/desaktibatzen ditu."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS protokolo ezagun bat da, TCP/IP sareetan fitxategiak konpartitzeko.\n"
-"Zerbitzu honek NFS zerbitzariaren funtzionaltasuna (/etc/exports "
-"fitxategian\n"
-"konfiguratua) eskaintzen du."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS protokolo ezagun bat da, TCP/IP sareetan fitxategiak \n"
-"konpartitzeko. Zerbitzu honek NFS fitxategi-blokeatzearen funtzionalitatea\n"
-"eskaintzen du."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Abioan automatikoki aktibatu BlokZenb tekla (zenbakiak\n"
-"blokeatzekoa) kontsolan eta XFree-n."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Onartu OKI 4w eta winprinter bateragarriak."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA euskarria eramangarrietan ethernet eta modemak\n"
-"eta horrelakoak onartzeko izaten da normalki.  Ez da abiaraziko "
-"konfiguratuta izan ezean, beraz\n"
-"lasai eduki daiteke instalatuta premiarik izan ez arren."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Ataka-mapatzaileak RPC konexioak kudeatzen ditu. Konexio horiek\n"
-"NFS eta NIS moduko protokoloek erabiltzen dituzte. RPC mekanismoa erabiltzen "
-"duten\n"
-"protokoloen zerbitzari gisa jokatzen duten makinetan aktibatu behar da\n"
-"ataka-maparen zerbitzaria."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix posta garraiatzeko agentea da (Mail Transport Agent - MTA), hau da, "
-"posta elektronikoa makina batetik bestera eramaten duen programa."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Sistemaren entropia gorde eta leheneratzen du ausazko zenbakiak\n"
-"hobeto sortzeko."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Esleitu gailu \"gordinak\" (raw devices) blokeko gailuei \n"
-"(disko gogorreko partizioak adib.), Oracle bezalako aplikazioentzat."
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed daemon-arekin IP bidatze-taula automatikoki egunera daiteke,\n"
-"RIP protokoloaren bidez. RIP asko erabiltzen da sare txikietan, baina\n"
-"banabide-protokolo konplexuagoak behar dira sare konplexuetan."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokoloari esker, sareko erabiltzaileek sare horretako \n"
-"edozein makinaren performantzia nolakoa den jakin dezakete."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokoloak sare bateko erabiltzaileei beste makina batzuetan\n"
-"nor sartzen den identifikatzeko aukera ematen die."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokoloak urruneko erabiltzaileei rwho daemon-a (finger-en antzekoa)\n"
-"duen makina batean sartutako erabiltzaile guztien zerrenda eman diezaieke."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Abiarazi zure makinako soinu-sistema"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog, daemon askok erabiltzen duten zerbitzua da, mezuak sistemako\n"
-"hainbat egunkari-fitxategitan sartzeko.  Komeni izaten da syslog beti "
-"exekutatzea."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Kargatu USB gailuen kontrolatzaileak."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"X letra-tipoen zerbitzaria abiarazten du (nahitaezkoa da XFree-k\n"
-"funtzionatu ahal izan dezan.)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Aukeratu zein zerbitzari abiarazi behar den automatikoki abioan"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Inprimatzea"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Fitxategi-konpartitzea"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistema"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Urruneko administrazioa"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Datu-baseen zerbitzaria"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Zerbitzuak: %d aktibatuta / %d erregistratuta"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Zerbitzuak"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "martxan"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "geldituta"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Zerbitzuak eta daemon-ak"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Ez dago zerbitzu honi buruzko\n"
-"informazio gehiago."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Abioan"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Hasi"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Gelditu"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Eskerrik asko Mandrake Linux 8.2 aukeratzeagatik"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Ongi etorri iturburu irekiaren mundura"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"MandrakeSoft-en arrakastaren funtsa software librearen printzipioa da. Zure "
-"sistema eragile berria mundu osoko Linux komunitatearen elkarlanaren emaitza "
-"da"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Sar zaitez software librearen munduan"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Ezagutu iturburu irekiaren komunitatea eta egin zaitez partaide. "
-"Sartu eztabaida-taldeetan \"Komunitatearen\" web orrien bidez eta ikasi, "
-"irakatsi eta lagundu beste batzuei."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet eta mezularitza"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2k software-aukera onenak eskaintzen dizkizu Internetek "
-"eman lezakeen guztia eskura dezazun. Murgildu amaraunean eta ikusi "
-"animazioak Mozilla eta Konqueror-ekin, trukatu mezuak eta antolatu zure "
-"informazio pertsonala Evolution eta Kmail-ekin, eta askoz ere gehiago"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia eta grafikoak"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2ekin zure multimedia ordenagailua mugaraino eramango duzu! "
-"Erabili audio-fitxategiak erreproduzitzeko, irudiak eta argazkiak editatu "
-"eta manipulatzeko eta TB eta bideoak ikusteko eta beste gauza askotarako "
-"azken softwarea "
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Garapena"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 garapen-plataforma ezin hobea da. Ezagutu GNU gcc "
-"konpilatzailearen ahalmen osoa eta iturburu irekiko garapen-ingurune onenak"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake-ren Kontrol Zentroa"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Mandrake Linux 8.2ren Kontrol Zentroak leku bakarretik zure Mandrake sistema "
-"erabat konfiguratu eta pertsonalizatzeko aukera ematen dizu"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Erabiltzaile-interfazeak"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2k 11 mahaigaineko ingurune grafiko eta leiho-kudeatzaile "
-"desberdin ematen ditu aukeran, horien artean, GNOME 1.4, KDE 2.2.2, Window "
-"Maker 0.8, eta abar"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Zerbitzari-softwarea"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Bihur ezazu zure makina zerbitzari ahaltsu, saguaren klik gutxi batzuk "
-"eginez: Web zerbitzaria, posta, suebakia, bidatzailea, fitxategi- eta "
-"inprimaketa-zerbitzaria,..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Jokoak"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2k iturburu irekiko jokorik onenak eskaintzen ditu - makina-"
-"jokoak, kiroletakoak, estrategiakoak, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Linux erabiltzen ikasi nahi duzu erraz, bizkor, eta doan? MandrakeSoft-ek "
-"Linux ikasteko doako zerbitzua eskaintzen dugu, zure aurrerapena neurtuz, "
-"MandrakeCampus lineako trebakuntza-zentroaren bidez"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Kalitatezko laguntza-zerbitzua eskaintzen dute Linux komunitateak eta "
-"MandrakeSoft-ek, eta hortxe bertan duzu. Linux-en beteranoa bazara, egin "
-"zaitez \"Aditu\", eta konpartitu zure jakituria eta gure laguntzako web "
-"gunea "
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Zure IT proiektuetarako, hor dituzu gure ahokulariak, zure premiak ulertu "
-"eta konponbide pertsonalizatua emateko prest. MandrakeSoft-ek, Linux ekoizle "
-"gisa duen esperientzia handiarekin, benetako IT alternatiba ematen du "
-"enpresa-antolamendurako"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Gure denda elektronikoan eskuragai dituzu gure Linux soluzioen aukera "
-"zabala, produktuei buruzko eskaintza bereziak eta bestelako 'gutiziak'"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"MandrakeSoft-en Zerbitzu Profesionalei eta eskaintza komertzialei buruzko "
-"informazioa nahi baduzu, ikus web orri hau:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Paketeak instalatzen..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ezin dut zure partizio-taula irakurri, hondatuegia dago :(\n"
-"Partizio txarrak garbitzen saiatuko naiz"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Errorea!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ezin da aurkitu `%s' imajina-fitxategia, eta beharrezkoa da."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Instalazio automatikoaren konfiguratzailea"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Auto-instalazioko diskete bat konfiguratzera zoaz. Eginbide hau arriskutsu "
-"samarra da eta kontuz ibili behar da.\n"
-"\n"
-"Eginbide honekin, ordenagailu honetan egin duzun instalazioa errepikatu ahal "
-"izango duzu, eta urrats batzuetan datuak eskatuko zaizkizu interaktiboki, "
-"balioak aldatu ahal izateko.\n"
-"\n"
-"Ahalik eta segurtasun handiena izateko, partizioa egitea eta formateatzea ez "
-"dira inoiz automatikoki egingo, berdin dio zer aukeratu duzun ordenagailu "
-"hau instalatu duzunean.\n"
-"\n"
-"Jarraitu nahi duzu ?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Urrats automatikoen konfigurazioa"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Aukeratu urrats bakoitzean instalazioa errepikatuko den, ala eskuz egingo "
-"duzun"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Ongi etorri.\n"
-"\n"
-"Auto-instalazioko parametroak ezkerreko sekzioetan daude erabilgarri"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Zorionak!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketea behar bezala sortu da.\n"
-"Orain zure instalazioa errepika dezakezu."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Instalazio automatikoa"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Gehitu elementu bat"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Kendu azken elementua"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr "***********************************************************************\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup-en berri-ematea \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Daemon-aren berri-ematea\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup-en berri-ematearen xehetasunak\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "progresioa guztira"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Sistema-fitxategien babeskopia"
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Disko gogorraren babeskopia fitxategiak... "
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Erabiltzaile-fitxategien babeskopia... "
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Disko gogorraren babeskopia egiten..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Beste fitxategi batzuen babeskopia... "
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"FTPk bidalitako fitxategi-zerrenda: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP konexio-arazoa: zure babeskopien fitxategiak ezin izan dira bidali "
-"FTP bidez.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Errorea posta bidaltzean. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Fitxategi-hautapena"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Hautatu fitxategiak edo direktorioak eta egin klik 'Gehitu'n"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Hautatu behar dituzun aukera guztiak.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Aukera horiek /etc direktorioko fitxategi guztiak kopiatu eta leheneratu "
-"ditzakete.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Sistema-fitxategien babeskopia. ( /etc direktorioa )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Erabili babeskopia inkrementala (ez ordeztu kopia zaharrak)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Ez sartu fitxategi kritikoak (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Aukera honekin /etc direktorioaren edozein bertsio leheneratu\n"
-"ahal izango duzu."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Hautatu babeskopian sartu nahi dituzun erabiltzaile guztiak."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Ez sartu arakatzailearen cache-a"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Erabili babeskopia inkrementalak (ez ordeztu kopia zaharrak)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Kendu hautatutakoak"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows(FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Erabiltzaileak"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Erabili FTP konexioa babeskopia egiteko"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Idatzi ostalariaren izena edo IPa."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Adierazi ostalariko direktorioa\n"
-"babeskopia jartzeko."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Sartu saioa hasteko izena"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Sartu pasahitza"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Gogoratu pasahitza"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP konexioa"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Konexio segurua"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Erabili CD/DVDROMa babeskopia egiteko"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Aukeratu CDko lekua"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Hautatu CDRW euskarria erabiltzen baduzu"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Hautatu CDRWa ezabatu nahi baduzu lehenik"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Hautatu instalazio-abioa gehitu nahi\n"
-" baduzu CDan."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Adierazi CD idazgailuaren gailu-izena \n"
-" adib.: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Erabili zinta babeskopia egiteko"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Adierazi babeskopiarako erabiliko den gailuaren izena"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Adierazi Drakbackup-en gehieneko\n"
-" tamaina "
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Adierazi gorde beharreko direktorioa:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Erabili kuota babeskopia-fitxategientzat"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Sarea"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "orduero"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "egunero"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "astero"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "hilero"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Erabili daemon-a"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Aukeratu babeskopiak egiteko \n"
-"maiztasuna"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Aukeratu babeskopia \n"
-"egiteko euskarria."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Erabili Disko gogorra daemon-arekin"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Erabili FTP daemon-arekin"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Ziurtatu cron daemon-a zerbitzuetan sartuta daukazula."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Babeskopia egindakoan, bidali berri-emateko mezua hona :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Zer"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Non"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Noiz"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Aukera gehiago"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr " Drakbackup-en konfigurazioa"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Aukeratu non egin nahi duzun babeskopia"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "disko gogorrean"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "sarean zehar"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Aukeratu zeren kopia egin nahi duzun"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Sistemaren babeskopia "
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Erabiltzaileen babeskopia"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Hautatu erabiltzailea eskuz"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Babeskopien iturburua: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Sistema-fitxategiak:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Erabiltzaile-fitxategiak:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Bestelako fitxategiak:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Gorde disko gogorrean, bide-izen honetan: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Gorde FTPan, ostalari honetan : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t erabiltzaile-izena: %s\n"
-"\t\t bide-izena: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Aukerak:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tEz sartu sistema-fitxategiak\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBabeskopietan erabili tar eta bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBabeskopietan erabili tar eta gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Daemon-ean (%s) sartzen da :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t Disko gogorra.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROMa.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\tFTP bidezko sarea.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\tSSH bidezko sarea.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ez dago konfiguraziorik, egin klik Morroian edo Aurreratuan.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Leheneratu beharreko datuen zerrenda:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Hondatutako datuen zerrenda:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Desautatu edo kendu hurrengo aldian."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Babeskopien fitxategiak hondatuta daude"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Hautatu dituzun datu guztiak          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          behar bezala leheneratu dira hona: %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         leheneratzeko konfigurazioa       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Ados, leheneratu beste fitxategiak"
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Leheneratzeko erabiltzaile-zerrenda (erabiltzaile bakoitzaren datu berrienak "
-"bakarrik dira garrantzitsuak)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Kopiatu sistema-fitxategiak lehenago:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "aukeratu leheneratzeko data"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Erabili disko gogorra babeskopia egiteko"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Leheneratu disko gogorretik"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Adierazi zein direktoriotan dauden babeskopiak"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Hautatu beste euskarri bat leheneratzeko"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Beste euskarri bat"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Leheneratu sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Leheneratu erabiltzaileak"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Leheneratu bestelakoak"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "hautatu leheneratzeko bidea ( / ordez)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Egin babeskopia berria leheneratu aurretik (inkrementaletan soilik.)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Kendu erabiltzaile-direktorioak leheneratu aurretik."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Leheneratu babeskopia guztiak."
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Leheneratze pertsonalizatua"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Laguntza"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Aurrekoa"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Gorde"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Egin babeskopia"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Leheneratu"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Hurrengoa"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Egin babeskopia leheneratu aurretik...\n"
-" edo egiaztatu gordetzeko bidea zuzena dela."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Errorea posta bidaltzean\n"
-"  berri emateko mezua ez da bidali\n"
-"  Konfiguratu posta-bidalketa"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Instalatu beharreko pakete-zerrenda"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Errorea FTP bidez fitxategia bidaltzean.\n"
-" Zuzendu FTP konfigurazioa."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Hautatu leheneratzeko datuak..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Hautatu babeskopiaren euskarria..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Hautatu babeskopia egiteko datuak..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Ez da konfigurazio-fitxategirik aurkitu \n"
-"egin klik Morroia-n edo Aurreratua-n."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Garatzen... itxaron."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Sistema-fitxategien babeskopia"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Erabiltzaile-fitxategien babeskopia"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Bestelako fitxategien babeskopia"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Guztizko progresioa"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "fitxategiak FTP bidez bidaltzen"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Fitxategiak bidaltzen..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "CDROMean gehitzeko datu-zerrenda"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Idatzi CD idazgailuaren abiadura"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Idatzi zure CD idazgailuaren izena (adib.: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Hautatu instalazio-abioa gehitu nahi baduzu CDan."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Egin babeskopia konfigurazio-fitxategitik"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Ikusi babeskopiaren konfigurazioa"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Morroiaren konfigurazioa"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Konfigurazio aurreratua"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Egin babeskopia orain"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"aukeren azalpena:\n"
-"\n"
-" Urrats honetan, Drakbackup-en bidez aldatuko dituzu:\n"
-"\n"
-" - Konprimitze-modua:\n"
-"    \n"
-"      bzip2 konpresioa hautatuz, gzip-ekin baino hobeto\n"
-"      konprimituko dituzu datuak (% 2-10 inguru).\n"
-"      Aukera hau ez da lehenespen gisa hautatzen konpresio-modu\n"
-"      honek denbora gehiago (% 1000 gehiago) hartzen duelako.\n"
-" \n"
-" - Eguneratze-modua:\n"
-"\n"
-"      Aukera honek babeskopia eguneratuko du, baina ez da\n"
-"      oso erabilgarria, eguneratu aurretik babeskopia\n"
-"      deskonprimitu egin behar baita.\n"
-"      \n"
-" - .backupignore modua:\n"
-"\n"
-"      cvs-rekin bezala, Drakbackup-ek ezikusi egingo die\n"
-"      .backupignore fitxategietako erreferentzia guztiei.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Posta bidaltzean izandako errore batzuk postfix gaizki \n"
-" konfiguratuta dagoelako izan dira. Konpontzeko, \n"
-" myhostname edo mydomain ezarri behar duzu hemen: /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"aukeren azalpena:\n"
-"\n"
-" - Sistema-fitxategien babeskopia:\n"
-"       \n"
-"\tAukera honen bidez konfigurazio-fitxategi guztiak dituen\n"
-"\t/etc direktorioaren babeskopia egin daiteke. Kontuz ibili\n"
-"\tleheneratze-urratsean, eta ez gainidatzi hauek:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Erabiltzaile-fitxategien babeskopia: \n"
-"\n"
-"\tAukera honen bidez, babeskopia egiteko erabiltzaileak\n"
-"\thauta ditzakezu.\n"
-"\tDisko-lekua gordetzeko, web arakatzailearen cachea ez \n"
-"\tsartzea komeni da.\n"
-"\n"
-" - Bestelako fitxategien babeskopia: \n"
-"\n"
-"\tAukera honen bidez, gordetzeko datu gehiago gehituko dituzu.\n"
-"\tBeste babeskopiekin ezin da oraindik babeskopia inkrementala hautatu.\t\t\n"
-" \n"
-" - Babeskopia inkrementalak:\n"
-"\n"
-"\tBabeskopia-aukera ahaltsuena da. Aukera honen\n"
-"\tbidez, lehen aldian datu guztien babeskopia egin\n"
-"\tdaiteke, eta gero aldatuenak bakarrik.\n"
-"\tGero, leheneratze-urratsean, data jakin bateko\n"
-"\tdatuak leheneratu ahal izango dituzu.\n"
-"\tAukera hau hautatuta ez baduzu, babeskopia zahar guztiak\n"
-"\tezabatzen dira babeskopia bakoitza egin aurretik.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"leheneratze-azalpena:\n"
-" \n"
-"Data berrienak soilik erabiliko dira, babeskopia inkrementalean\n"
-"beharrezkoa delako babeskopia zaharrak banan-banan ezabatzea.\n"
-"\n"
-"Erabiltzaile bat leheneratu nahi ez baduzu, desautatu haren \n"
-"kontrol-laukia.\n"
-"\n"
-"Bestela, hauetako bakarra hautatu ahal izango duzu\n"
-"\n"
-" - Babeskopia inkrementalak:\n"
-"\n"
-"\tBabeskopia-aukera ahaltsuena da. Aukera honen\n"
-"\tbidez, lehen aldian datu guztien babeskopia egin\n"
-"\tdaiteke, eta gero aldatuenak bakarrik.\n"
-"\tGero, leheneratze-urratsean, data jakin bateko\n"
-"\tdatuak leheneratu ahal izango dituzu.\n"
-"\tAukera hau hautatuta ez baduzu, babeskopia zahar guztiak\n"
-"\tezabatzen dira babeskopia bakoitzaren aurretik.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft, DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Programa hau software librea da; birbana eta/edo alda dezakezu\n"
-" Software Foundation-ek argitaratutako GNU Lizentzia Publiko Orokorraren\n"
-" 2. bertsioan, edo (nahiago baduzu) beste berriago batean, jasotako\n"
-" baldintzak betez gero.\n"
-"\n"
-" Programa hau erabilgarria izango delakoan banatzen da, baina\n"
-" INOLAKO BERMERIK GABE; era berean, ez da bermatzen beraren\n"
-" EGOKITASUNA MERKATURATZEKO edo HELBURU PARTIKULARRETARAKO ERABILTZEKO.\n"
-" Argibide gehiago nahi izanez gero, ikus GNU Lizentzia Publiko Orokorra.\n"
-"\n"
-" Programa honekin batera GNU Lizentzia Publiko Orokorraren kopia bat\n"
-" jasoko zenuen; hala ez bada, idatzi hona: Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Azalpena:\n"
-"\n"
-"  Drakbackup zure sistemaren babeskopia egiteko erabiltzen da.\n"
-"  konfigurazioan zehar hauta ditzakezu: \n"
-"\t- Sistema-fitxategiak, \n"
-"\t- Erabiltzaile-fitxategiak, \n"
-"\t- Bestelako fitxategiak.\n"
-"\tedo Sistema osoa ...  eta Bestelakoa (Windows partizioetan bezala)\n"
-"\n"
-"  Drakbackup-en bidez, babeskopiak egiteko erabil daiteke:\n"
-"\t- Disko gogorra.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM.\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Zinta.\n"
-"\n"
-"  Drakbackup erabiliz, zure sistema hautatutako\n"
-"  direktorio batean lehenera dezakezu.\n"
-"\n"
-"  Lehenespen gisa, babeskopia guztiak \n"
-"  /var/lib/drakbackup direktorioan gordeko dira\n"
-"\n"
-"  Konfigurazio-fitxategia:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Leheneratze-urratsa:\n"
-"  \n"
-"  Leheneratze-urratsean, DrakBackup.ek kendu egingo du\n"
-"  jatorrizko direktorioa eta babeskopia-fitxategiak ez\n"
-"  daudela hondatuta egiaztatuko du. Leheneratu aurretik\n"
-"  babeskopia egitea gomendatzen da.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"aukeren azalpena:\n"
-"\n"
-"Kontuz ftp backup erabiltzean, eginda dauden babeskopiak \n"
-"soilik bidaliko direlako zerbitzarira.\n"
-"Beraz, orain, disko gogorrean egin behar duzu babeskopia\n"
-"zerbitzarira bidali aurretik.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Leheneratze-arazoak:\n"
-"\n"
-"Leheneratze-urratsean, Drakbackup-ek babeskopia-fitxategi\n"
-"guztiak egiaztatuko ditu leheneratu aurretik.\n"
-"Leheneratu aurretik, Drakbackup-ek kendu egingo du\n"
-"jatorrizko direktorioa, eta datu guztiak galduko dituzu.\n"
-"Garrantzizkoa da kontuz ibiltzea eta babeskopia-fitxategiak\n"
-"eskuz ez aldatzea.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Azalpena:\n"
-"\n"
-"  Drakbackup zure sistemaren babeskopia egiteko erabiltzen da.\n"
-"  konfigurazioan zehar hauta ditzakezu: \n"
-"\t- Sistema-fitxategiak, \n"
-"\t- Erabiltzaile-fitxategiak, \n"
-"\t- Bestelako fitxategiak.\n"
-"\tedo Sistema osoa ...  eta Bestelakoa (Windows partizioetan bezala)\n"
-"\n"
-"  Drakbackup-en bidez, babeskopiak egiteko erabil daiteke:\n"
-"\t- Disko gogorra.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM.\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Zinta.\n"
-"\n"
-"  Drakbackup erabiliz, zure sistema hautatutako\n"
-"  direktorio batean lehenera dezakezu.\n"
-"\n"
-"  Lehenespen gisa, babeskopia guztiak \n"
-"  /var/lib/drakbackup direktorioan gordeko dira\n"
-"\n"
-"  Konfigurazio-fitxategia:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Leheneratze-urratsa:\n"
-"  \n"
-"  Leheneratze-urratsean, DrakBackup.ek kendu egingo du\n"
-"  jatorrizko direktorioa eta babeskopia-fitxategiak ez\n"
-"  daudela hondatuta egiaztatuko du. Leheneratu aurretik\n"
-"  babeskopia egitea gomendatzen da.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%sren instalazioak huts egin du. Errore hau gertatu da:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Bilatu instalatutako letra-tipoak"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Desautatu instalatutako letra-tipoak"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "analizatu letra-tipo guztiak"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "ez da letra-tiporik aurkitu"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "eginda"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "ezin izan da letra-tiporik aurkitu muntatutako partizioetan"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Hautatu berriro letra-tipo egokiak"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "ezin izan da letra-tiporik aurkitu.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Bilatu letra-tipoak instalatutakoen zerrendan"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Letra-tipoen kopia"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "True Type letra-tipoen instalazioa"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "itxaron... ttmkfdir egin bitartean..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "True Type instalazioa eginda"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Letra-tipoen bihurketa"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "type1inst eraikitzen"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript erreferentzia"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf letra-tipoen bihurketa"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm letra-tipoen bihurketa"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Ezabatu aldi baterako fitxategiak"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Berrabiarazi XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Ezabatu letra-tipoen fitxategiak"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs berrabiarazi"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Letra-tipoak instalatu aurretik, ziurtatu sisteman erabili eta instalatzeko "
-"baimena duzula.\n"
-"\n"
-"-Letra-tipoak instalatzeko ohiko era erabil dezakezu. Oso gutxitan, akastun "
-"letra-tipoek zure X Zerbitzaria blokea dezakete."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Letra-tipoen inportazioa"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Hartu Windows letra-tipoak"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Desinstalatu letra-tipoak"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Aukera aurreratuak"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Letra-tipoen zerrenda"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Hautatu letra-tipoak onartuko dituzten aplikazioak :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Inprimagailu generikoak"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Hautatu letra-tipoen fitxategia edo direktorioa eta egin klik 'Gehitu'n"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Instalatu zerrenda"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "egin klik hemen, ziur bazaude."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "egin klik hemen, ziur ez bazaude."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Desautatutako guztiak"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Hautatutako guztiak"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Kendu zerrenda"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Hasierako probak"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopiatu zure sistemako letra-tipoak"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Instalatu eta bihurtu letra-tipoak"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Posta-instalazioa"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Kendu zure sistemako letra-tipoak"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Posta-desinstalazioa"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Interneteko konexioa konpartitzea"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Interneteko konexioa konpartitzea gaituta dago orain"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneteko konexioa konpartitzeko konfigurazioa eginda dago.\n"
-"Gaituta dago orain.\n"
-"\n"
-"Zer egin nahi duzu?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "desgaitu"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "itxi"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "birkonfiguratu"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Zerbitzariak desgaitzen..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Interneteko konexioa konpartitzea desgaituta dago orain."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Interneteko konexioa konpartitzea desgaituta dago orain"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneteko konexioa konpartitzeko konfigurazioa eginda dago.\n"
-"Desgaituta dago orain.\n"
-"\n"
-"Zer egin nahi duzu?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "gaitu"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Zerbitzariak gaitzen..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Interneteko konexioa konpartitzea gaituta dago orain."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Ordenagailua Interneteko konexioa konpartitzeko konfiguratzera zoaz.\n"
-"Eginbide horrekin, sare lokaleko ordenagailuek zure ordenagailuko "
-"Interneteko konexioa erabili ahal izango dute.\n"
-"\n"
-"Kontuan hartu: Sare-moldagailu dedikatu bat behar duzu sare lokala (LAN) "
-"konfiguratzeko."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "%s interfazea (%s modulua erabiliz)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "%s interfazea"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Ez dago sare-moldagailurik zure sisteman!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Zure sisteman ez da ethernet sare-moldagailurik detektatu. Exekutatu "
-"hardwarea konfiguratzeko tresna."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Sare-interfazea"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sare-moldagailu konfiguratu bakarra dago zure sisteman:\n"
-"\n"
-"%s\n"
-"\n"
-"Zure sare lokala moldagailu horrekin konfiguratzera noa."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Aukeratu zein sare-moldagailu konektatuko den zure sare lokalarekin."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Sareko interfazea konfiguratuta dago"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Kontuz, sare-moldagailua (%s) jadanik konfiguratuta dago.\n"
-"\n"
-"Automatikoki birkonfiguratu nahi duzu?\n"
-"\n"
-"Eskuz egin dezakezu, baldin eta zertan zabiltzan badakizu."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Birkonfigurazio automatikoa"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Erakutsi uneko interfaze-konfigurazioa"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"`%s' - uneko konfigurazioa:\n"
-"\n"
-"Sarea: %s\n"
-"IP helbidea: %s\n"
-"IP atribuzioa: %s\n"
-"Kontrolatzailea: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Uneko konfigurazioa gorde eta DHCP zerbitzari bat konfiguratuta duzula "
-"pentsa dezaket; hala bada, ziurtatu ondo irakurri dudala sare lokalerako "
-"erabiltzen duzun C klaseko sarea; ez dut birkonfiguratuko eta ez dut ukituko "
-"zure DHCP zerbitzariaren konfigurazioa.\n"
-"\n"
-"Gainera, zure interfazea eta DHCP zerbitzaria (bir)konfigura ditzaket.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C klaseko sare lokala"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "DHCP zerbitzariaren IPa"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Birkonfiguratu interfazea eta DHCP zerbitzaria"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Sare lokalak ez du `.0' amaieran; irteten. "
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"LAN helbide-gatazka potentziala aurkitu da %s(r)en uneko konfigurazioan!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Suebaki-konfigurazioa detektatu da!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Kontuz! Lehendik dagoen suebaki-konfigurazio bat detektatu da. Beharbada "
-"eskuz konponketa batzuk egin beharko dituzu instalazioaren ondoren."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfiguratzen..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Script-ak konfiguratzen, softwarea instalatzen, zerbitzariak abiarazten..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Arazoa %s paketea instalatzean"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Dena konfiguratu da.\n"
-"Orain Interneteko konexioa konparti dezakezu sare lokaleko beste ordenagailu "
-"batzuekin, sare-konfigurazio automatikoa (DHCP) erabiliz."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Konfigurazioa eginda dago, baina orain desgaituta dago."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Konfigurazioa eginda dago, eta orain gaituta dago."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Interneteko konexioa konpartitzea ez da inoiz konfiguratu."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Interneteko konexioa konpartitzeko konfigurazioa"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Ongi etorri Interneteko konexioa konpartitzeko utilitatera!\n"
-"\n"
-"%s\n"
-"\n"
-"Egin klik 'Konfiguratu'n instalazio-morroia abiarazteko."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Sare-konfigurazioa (%d moldagailuak)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profila: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Ezabatu profila..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Ezabatu beharreko profila:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Profil berria..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Sortu beharreko profilaren izena (profil berria oraingoaren kopia gisa "
-"sortuko da) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Ostalari-izena: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Interneterako sarbidea"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Mota:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Atebidea:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfazea:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Egoera:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Itxaron"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfiguratu Interneterako sarbidea..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Sare lokalaren konfigurazioa (LAN)"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Kontrolatzailea"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfazea"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoloa"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Egoera"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfiguratu sare lokala..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Egin klik hemen morroia abiarazteko ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Morroia..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Aplikatu"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Itxaron... Konfigurazioa aplikatzen"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Konektatuta"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Konektatu gabe"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Konektatu..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Deskonektatu..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Kontuz, beste Internet konexio bat detektatu da, agian zure sarea erabiltzen "
-"ariko da"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Ez duzu interfaze konfiguraturik.\n"
-"Konfigura itzazu lehendabizi, 'Konfiguratu'n klik eginda"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Sare lokalaren konfigurazioa (LAN)"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "%s moldagailua: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Abioko protokoloa"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Abioan abiaraztekoa"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP bezeroa"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktibatu orain"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "desaktibatu orain"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Interfaze hau ez dago konfiguratuta.\n"
-"Abiarazi konfigurazio-morroia leiho nagusian"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Ez duzu Interneteko konexiorik.\n"
-"Sortu bat lehendabizi, 'Konfiguratu'n klik eginda"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Interneteko konexioaren konfigurazioa"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Interneteko konexioaren konfigurazioa"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Konexio-mota: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametroak"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Atebidea"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet txartela"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP bezeroa"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Segurtasun-maila ezartzen"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrol Zentroa"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Aukeratu erabili nahi duzun tresna"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kablea)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "AEB (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "AEB (kablea)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "AEB (kablea-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Txina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japonia (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japonia (kablea)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Europa Ekialdea"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlanda"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Europa Mendebaldea"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Zeelanda Berria"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Hegoafrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Idatzi\n"
-"zure TB araua eta estatua"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TB araua :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Area :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "TB kanalak bilatzen..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "TB kanalak bilatzen"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "erabilera: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Aukeratu zure teklatu-diseinua."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Atzera-teklak Ezabatu itzultzea nahi duzu kontsolan?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Aldatu CDROMa"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Sartu instalazioko CDROMa unitatean eta sakatu Ados.\n"
-"Ez baduzu, sakatu Utzi bertsio-berritzea saihesteko."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ezin da bertsio-berritzea abiarazi!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Aldaketa egin da, baina, eragina izan dezan, saioa amaitu behar duzu"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Erakutsi bakarrik hautatutako egunerako"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fitxategia/_Berria"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fitxategia/_Ireki"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fitxategia/_Gorde"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fitxategia/Gorde _honela"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fitxategia/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Aukerak"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Aukerak/Probatu"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Laguntza"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Laguntza/_Honi buruz..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Erabiltzailea"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Mezuak"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Mandrake Tools-en azalpenak"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "bilatu"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Zure erregistroak ikusteko tresna"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Ezarpenak"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "bat badatoz"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "bat ez badatoz"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Aukeratu fitxategia"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Egutegia"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Fitxategiaren edukia"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Posta/SMSren abisua"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "itxaron, fitxategia analizatzen: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Posta/SMSren abisuaren konfigurazioa"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Ongi etorri Posta/SMS konfiguratzeko utilitatera.\n"
-"\n"
-"Hemen zure abisu-sistema konfiguratu ahal izango duzu.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "zerbitzuaren ezarpena"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Hautatutako zerbitzuetakoren bat martxan ez badago, abisua jasoko duzu"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "kargatzeko ezarpenak"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Karga balio hau baino handiagoa bada, abisua jasoko duzu"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "abisu-konfigurazioa"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Konfiguratu abisuak jasotzeko modua"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Gorde honela.."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Aukeratu sagu-mota."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ez da serieko USBrik aurkitu\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Hirugarren botoia emulatu?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s aurkitu da hemen: %s. Konfiguratu nahi duzu ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Hautatu eskaner bat"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "%s eskaner hori ez da onartzen"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Abioko gailua"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"%s eskaner hau printerdrake-rekin konfiguratu behar da.\n"
-"Mandrake Kontrol Zentroko Hardwarearen ataletik abiaraz dezakezu "
-"printerdrake."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Suebakiaren konfigurazioa"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Suebakiaren konfigurazioa"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Suebakia\n"
-"\n"
-"Jadanik konfiguratu duzu suebaki bat.\n"
-"Suebakia aldatzeko edo kentzeko, egin klik 'Konfiguratu'n"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Suebakia\n"
-"\n"
-"Suebaki estandar bat konfiguratzeko, egin klik 'Konfiguratu'n"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Aukeratu hizkuntza"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Hautatu instalazio-klasea"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Disko gogorren detekzioa"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfiguratu sagua"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Aukeratu teklatua"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Segurtasuna"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Ezarri fitxategi-sistemak"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Eman formatua partizioei"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Aukeratu instalatu beharreko paketeak"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalatu sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Gehitu erabiltzaile bat"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfiguratu sarea"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfiguratu zerbitzuak"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instalatu abioko kargatzailea"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Sortu abioko disko bat"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfiguratu X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Instalatu sistema-eguneratzeak"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Irten instalaziotik"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall konfiguratzailea\n"
-"\n"
-"Mandrake Linux makina honetarako suebaki pertsonala konfiguratzen du.\n"
-"Suebaki ahaltsuagoa nahi baduzu, begiratu MandrakeSecurity Firewall \n"
-"banaketa espezializatua."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Orain galdera batzuk egingo dizkizugu, Interneteko zein zerbitzutara \n"
-"konektatu nahi duzun jakiteko.  Ongi pentsatu erantzun aurretik, \n"
-"zure ordenagailuaren segurtasuna garrantzitsua baita.\n"
-"\n"
-"Horietako zerbitzuren bat erabiltzen ez baduzu, desaktiba\n"
-"ezazu.  Konfigurazio hau nahi duzunean alda dezakezu,\n"
-"aplikazio hau berriro exekutatuz!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Internet osotik ikusi behar den web zerbitzari bat daukazu martxan\n"
-"makina honetan? Makina honetatik bakarrik erabili behar den web zerbitzari\n"
-"bat badaukazu, lasai erantzun dezakezu EZ hemen.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Izen-zerbitzari bat erabiltzen duzu makina honetan? Izen-zerbitzaririk ez \n"
-"badaukazu ezarrita IP eta zonako informazioa emateko Internet osorako,\n"
-"erantzun EZ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Secure Shell (ssh) konexioei sartzeko baimena eman nahi diezu? \n"
-"Telnet-en ordezkoa da, urruneko makinetan sartzeko erabil dezakezuna. \n"
-"telnet erabiltzen baduzu, ssh-ra aldatu behar duzu zalantzarik gabe. \n"
-"telnet ez dago enkriptatuta - hortaz, erasotzaileek zure pasahitza lapur \n"
-"dezakete. ssh enkriptatuta dago eta beraz ezin da harrapatu."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"telnet konexioei sartzen utzi nahi diezu?\n"
-"Hori ez da batere batere segurua, aurreko pantailan azaldu dugunez. \n"
-"Biziki gomendatzen dugu hemen EZ erantzutea eta telnet-en ordez ssh\n"
-"erabiltzea.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Internetetik ikusi behar den FTP zerbitzaririk erabiltzen duzu?\n"
-"Horrela bada, biziki gomendatzen dizugu transferentzia anonimoetarako\n"
-"bakarrik erabiltzea. FTP bidez bidalitako pasahitzak lapurtu egin "
-"ditzakete,\n"
-"FTPk ere ez baitu enkriptatzerik erabiltzen pasahitzak transferitzeko.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Posta-zerbitzaririk baduzu martxan hemen? Mezuak pine, mutt edo\n"
-"testuan oinarritutako beste posta-bezeroren baten bidez bidaltzen\n"
-"badituzu, ziur aski izango duzu.  Bestela, desaktibatzea komeni da.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"POP edo IMAP zerbitzaririk baduzu hemen? \n"
-"Web-ean oinarritu gabeko posta-kontuen ostalari izateko \n"
-"erabiltzen da hau.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Badirudi 2.2 bertsioko nukleoa erabiltzen duzula.  Zure sarearen \n"
-"IP helbidea automatikoki ezartzen badu zure etxeko edo \n"
-"bulegoko ordenagailu batek (dinamikoki esleituta), onartu \n"
-"egin beharko dugu.  Horrela da?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Zure ordenagailua beste batekin sinkronizatuta dabil?\n"
-"Nagusiki, hori Unix/Linux antolamendu ertain eta handiek \n"
-"erabiltzen dute, konexio-orduak sinkronizatzeko eta   horrelakoetarako. "
-"Bulego handi batean ari ez bazara eta \n"
-"honelako konturik entzun ez baduzu, ziur aski ez zara\n"
-"inorekin sinkronizatuta egongo."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurazioa osatu da.  Diskoan idatziko ditugu aldaketak?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ezin da %s ireki: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ezin da %s idazteko ireki: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Ez, ez dut DHCP behar"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Bai, DHCP behar dut"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Ez, ez dut NTP behar"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Bai, NTP behar dut"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Ez gorde"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Gorde eta irten"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Suebakia konfiguratzeko morroia"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Ez (egin suebakia Internetetik)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Bai (onartu hau suebakian zehar)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Itxaron... instalatutako paketeak egiaztatzen"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Huts egin du beharrezko pakete hauek instalatzean: %s eta Bastille.\n"
-" Saiatu eskuz instalatzen."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Sare-ordenagailua (bezeroa)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS zerbitzaria, SMB zerbitzaria, Proxy zerbitzaria, ssh zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome-ren lan-estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm Pilot edo Visor-erako tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Lan-estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Suebakia/Bidatzailea"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domeinu-izenen eta sareko informazioaren zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Bulego-lanetako programak: testu-prozesadoreak (kword, abiword), kalkulu-"
-"orriak (kspread, gnumeric), pdf ikustaileak, etab."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio tresnak: mp3 edo midi erreproduzigailuak, nahastaileak, etab."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Linux eta Software libreari buruzko liburuak eta azalpenak"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE lan-estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etab."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Bideoa"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Posta, berriak, web-a, fitxategi-transferentzia eta berriketa kudeatzeko "
-"tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Datu-basea"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL edo MySQL datu-baseen zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Zure ordenagailuaren konfigurazioa errazteko tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Soinua"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitateak"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentazioa"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Kontsola-tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix posta-zerbitzaria, Inn berri-zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Interneteko estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimediako estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfigurazioa"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Mahaigain grafiko gehiago (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"KDE, K Desktop Environment, hainbat tresna duen oinarrizko ingurune grafikoa."
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ingurune grafikoa"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CDak sortzeko eta grabatzeko tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Bulegoko lan-estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etab."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "The Gimp bezalako programa grafikoak"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C eta C++ garapen-liburutegiak, programak eta fitxategiak"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Sare-zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Posta/Groupware/Berriak"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Joko-estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Bideo-erreproduzigailuak eta editoreak"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafikoak"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-"Denbora-pasako programak: makina-jokoak, taula-jokoak, estrategiakoak, etab."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Posta eta berriak irakurtzeko eta bidaltzeko (pine, mutt, tin..) eta web-a "
-"arakatzeko tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Artxibatzea, emulatzaileak, monitorizatzea"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finantza pertsonalak"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Aplikazio-multzo eta mahaigaineko tresna lagungarri eta atseginak dituen "
-"ingurune grafikoa"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Hainbat protokolotako bezeroak, ssh-renak barne"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Interneteko atebidea"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Soinua eta bideoa jotzeko/editatzeko programak"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Beste mahaigain grafiko batzuk"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editoreak, shell-ak, fitxategi-tresnak, terminalak"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Zure finantzak kudeatzeko programak, hala nola gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Informazio pertsonalaren kudeaketa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD grabatzea"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Lan-estazio zientifikoa"
diff --git a/perl-install/share/po/fake_c.pl b/perl-install/share/po/fake_c.pl
deleted file mode 100755
index 21cf25b04..000000000
--- a/perl-install/share/po/fake_c.pl
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/usr/bin/perl -lp
-
-s|^(__?\()| $1|;		# add a blank at the beginning (?!)
-
-s|_\(\[(.*),\s*(.*),\s*(.*)\]|ngettext($2,$3,$1)|; # special plural form handling
-
-s,\Qs/#.*//,,;			# ugly special case
-
-s,(^|[^\$])#([^+].*),"$1/*" . simpl($2) . "*/",e; 
-                                # rewrite comments to C format except for:
-                                # - ``#+ xxx'' comments which are kept
-                                # - ``$#xxx'' which are not comments
-
-s|//|/""/|g;			# ensure // or not understood as comments
-
-s|$|\\n\\|;			# multi-line strings not handled in C
-
-sub simpl {
-    local $_ = $_[0];
-    s,\*/,,g;
-    $_;
-}
diff --git a/perl-install/share/po/fi.po b/perl-install/share/po/fi.po
deleted file mode 100644
index a3cc4183d..000000000
--- a/perl-install/share/po/fi.po
+++ /dev/null
@@ -1,11489 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999, 2002 Mandrakesoft
-# Kim Enkovaara <kim.enkovaara@iki.fi>, 1999, 2000
-# Matias Griese <mahagr@utu.fi>, 2001, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-02-20 22:55EET\n"
-"Last-Translator: Matias Griese <mahagr@utu.fi>\n"
-"Language-Team: Finnish\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-15\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Aseta kaikki n�yt�t erikseen"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "K�yt� Xinerama-laajennusta"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "M��rittele vain kortin \"%s\" (%s) asetukset"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Monen n�yt�n asettaminen"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"J�rjestelm�si tukee monen n�yt�n laitteistokokoonpanoa.\n"
-"Mit� haluat tehd�?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "N�yt�nohjain"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Valitse n�yt�nohjain"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Valitse X-palvelin"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X-palvelin"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Valitse X-palvelin"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X-palvelin"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Mit� versiota XFree-serverist� haluat k�ytt��?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"N�yt�nohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit vain XFree %s:"
-"ssa.\n"
-"Korttisi on tuettu my�s XFree %s:ssa, jossa on mahdollisesti parempi 2D-tuki."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"N�yt�nohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit XFree %s:ssa."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s laitteistokiihdytetyll� 3D-tuella"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"N�yt�nohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit XFree %s:ssa.\n"
-"HUOMAA, ETT� TUKI ON KOKEELLINEN JA VOI JUMITTAA TIETOKONEESI."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s KOKEELLISELLA laitteistokiihdytetyll� 3D-tuella"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"N�yt�nohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit vain XFree %s:"
-"ssa.\n"
-"HUOMAA, ETT� TUKI ON KOKEELLINEN JA VOI JUMITTAA TIETOKONEESI.Korttisi on "
-"tuettu my�s XFree %s:ssa, jossa on mahdollisesti parempi 2D-tuki."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (n�yt�nohjaimen ajurin asennus)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFreen asentaminen"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Valitse n�yt�nohjaimen muistin m��r�"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Valitse optioita palvelimelle"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Valitse monitori"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "N�ytt�"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Sinun tulee valita vaakavirkistystaajuus n�yt�llesi. Voit joko valita "
-"jonkin\n"
-"allaolevista alueista, jotka vastaavat teollisuusstandardityyppej� tai "
-"sy�tt��\n"
-"jonkin muun alueen.\n"
-"\n"
-"On HYVIN T�RKE��, ett� et valitse n�ytt�tyyppi�, jonka "
-"vaakavirkistystaajuus\n"
-"on suurempi kuin oman n�ytt�si. Jos ep�r�it, valitse pienempi taajuus."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Vaakavirkistystaajuus"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Pystyvirkistystaajuus"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "N�ytt�� ei ole asetettu"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "N�yt�nohjainta ei ole viel� asetettu"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "N�yt�n resoluutiota ei ole viel� valittu"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Haluatko kokeilla asetuksia?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Varoitus: n�yt�nohjaimesi testaaminen voi jumittaa tietokoneen"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Kokeile asetuksia"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"kokeile joidenkin parametrien muuttamista"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Tapahtui virhe:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Lopetan %d sekunnissa"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Onko t�m� oikea asetus?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Tapahtui virhe, kokeile joidenkin parametrien vaihtamista"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resoluutio"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Valitse resoluutio ja v�risyvyys"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "N�yt�nohjain: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 palvelin: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Lis�asetukset"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Asiantuntijatila"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "N�yt� kaikki"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resoluutiot"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "N�pp�inasettelu: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Hiiren tyyppi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Hiiren laite: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "N�ytt�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "N�yt�n vaakajuovataajuus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "N�yt�n virkistystaajuus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "N�yt�nohjain: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "N�yt�nohjaimen tunniste: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafiikkamuisti: %s kt\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "V�risyvyys: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resoluutio: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 palvelin: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ajurit: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Valmistelen X-Windowin asetuksia"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Mit� haluat tehd�?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Vaihda n�ytt��"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Vaihda n�yt�nohjainta"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Vaihda palvelimen optioita"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Vaihda resoluutiota"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "N�yt� tiedot"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Kokeile uudelleen"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Lopeta"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"S�ilyt� muutokset?\n"
-"Nykyiset asetukset ovat:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "K�ynnistett�ess� X:��"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"X voidaan laittaa k�ynnistym��n automaattisesti k�ynnistyksen yhteydess�.\n"
-"Haluatko k�ynnist�� X:n automaattisesti?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Kirjaudu uudelleen %s:een aktivoidaksesi muutokset"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Kirjaudu ulos ja kirjoita sitten Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 v�ri� (8 bitti�)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tuhatta v�ri� (15 bitti�)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tuhatta v�ri� (16 bitti�)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljoonaa v�ri� (24 bitti�)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljardia v�ri� (32 bitti�)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kt"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kt"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 Mt tai enemm�n"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Perus-VGA,  640x480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "SVGA, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-yhteensopiva, 1024x768 @ 87 Hz lomitettu (ei 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "SVGA, 1024x768 @ 87 Hz lomitettu, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Laajennettu SVGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Lomittamaton SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Korkeataajuuksinen SVGA, 1024x768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "N�ytt�, joka pystyy 1280x1024 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "N�ytt�, joka pystyy 1280x1024 @ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "N�ytt�, joka pystyy 1280x1024 @ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "N�ytt�, joka pystyy 1600x1200 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "N�ytt�, joka pystyy 1600x1200 @ 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Ensimm�inen sektori k�ynnistysosiolla"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Levyn ensimm�inen sektori (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILOn asennus"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Minne haluat asentaa k�ytt�j�rjestelm�n lataajan?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub asennus"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO tekstipohjaisella valikolla"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO graafisella valikolla"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "K�ynnist� DOSista/Windowsista (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "K�ytt�j�rjestelm�n lataajan p��asetukset"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "K�ytett�v� k�ytt�j�rjestelm�n lataaja"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "K�ytt�j�rjestelm�n lataajan asennus"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "K�ynnistyslaite"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ei toimi vanhoissa BIOSeissa)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Tiivis"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "tiivis"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "N�ytt�tila"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Tauko ennen oletusj�rjestelm�n k�ynnistyst�"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Salasana"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Salasana (uudelleen)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Rajoita komentorivioptioita"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "rajoita"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Tyhjenn� /tmp jokaisella k�ynnistyskerralla"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tarkka muistin koko, jos tarpeen (l�ydettiin %d Mt)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "K�yt� montaa profiilia"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Anna muistin koko megatavuina"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Asetus ``Rajoita komentorivioptioita'' ei ole hy�dyllinen ilman salasanaa"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Yrit� uudelleen"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Salasanat poikkeavat toisistaan"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "K�ynnistysviesti"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Vapaa Firmware-viive"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Timeout ytimen k�ynnistyksess�"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Mahdollista k�ynnistys CD:lt�"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Mahdollista k�ynnistys OFilta"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Oletusk�ytt�j�rjestelm�?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"T�ss� ovat asetustietueet.\n"
-"Voit lis�t� uusia tai muuttaa olemassaolevia."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Lis��"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Valmis"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Muokkaa"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Mink� tyyppisen tietueen haluat lis�t�"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Muu k�ytt�j�rjestelm� (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Muu k�ytt�j�rjestelm� (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Muu k�ytt�j�rjestelm� (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Kuva"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Juuri"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Liit�"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Luku-kirjoitus"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Taulukko"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Turvaton"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Otsikko"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Oletus"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd:n koko"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Ei N�ytt��"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Poista tietue"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Tyhj�� otsikkoa ei sallita"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Sinun t�ytyy m��ritell� ydin"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Sinulla t�ytyy m��ritell� juuriosio"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Otsikko on jo k�yt�ss�"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "L�ysin %s %s liit�nn�t"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Onko sinulla muita?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Onko koneessa %s liitynt��?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ei"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Kyll�"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Katso laitteistotietoja"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Asetan ajuria %s ohjaimelle %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(moduli %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Mit� %s-ajuria kokeillaan?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Joissakin tapauksissa %s-ajuri tarvitsee lis�tietoja toimiakseen kunnolla,\n"
-"joskin tavallisesti se toimii hyvin ilmankin. Haluaisitko antaa ajurille\n"
-"lis�m��reit� vai annatko sen itse etsi� tarvitsemansa tiedot? Joskus haku\n"
-"voi jumittaa tietokoneen, mutta se ei aiheuta vahinkoa."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automaattihaku"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Lis�asetukset"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Voit antaa lis�asetuksia modulille %s.\n"
-"Asetukset ovat muotoa ``nimi=arvo nimi2=arvo2 ...''.\n"
-"Esimerkiksi, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Moduulin optiot:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Modulin %s lataaminen ep�onnistui.\n"
-"Haluatko yritt�� muilla asetuksilla?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "oikeudet X-ohjelmille"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "oikeudet rpm-ty�kaluihin"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "salli \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "oikeudet yll�pidollisiin tiedostoihin"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(lis�tty jo %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Salasana on liian yksinkertainen"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Anna k�ytt�j�tunnus"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"K�ytt�j�tunnus saa sis�lt�� vain pieni� kirjaimia, numeroita, `-' ja `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "K�ytt�j�tunnus on jo lis�tty"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Lis�� k�ytt�j�"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Lis�� k�ytt�j�\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Hyv�ksy k�ytt�j�"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Oikea nimi"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "K�ytt�j�tunnus"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Komentotulkki"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Kuvake"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automaattinen kirjautuminen"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Yksi k�ytt�j� voidaan asettaa kirjautumaan automaattisesti sis��n "
-"tietokoneellesi.\n"
-"Haluatko k�ytt�� t�t� ominaisuutta?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Valitse oletusk�ytt�j�:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Valitse k�ytett�v� ikkunointij�rjestelm�:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Valitse k�ytett�v� kieli."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Voit valita kielet jotka ovat k�ytett�viss� asennuksen j�lkeen"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Kaikki"
-
-# Asennuksen sivuvalikko
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Salli kaikille k�ytt�jille"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Mukautettu"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Ei jaettu"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paketti %s pit�� asentaa. Haluatko asentaa sen?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Voit jakaa sek� NFS:ll� ett� Samballa. Kumpaa haluat k�ytt��"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Pakollinen paketti %s puuttuu"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Peruuta"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Tervetuloa murtautujat"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Huono"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardi"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Korkea"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Korkea"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidi"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"T�t� tasoa tulee k�ytt�� varoen. Se tekee j�rjestelm�st�si helpomman "
-"k�ytt��,\n"
-"mutta hyvin herk�n: sit� ei tule k�ytt�� koneessa joka on kytketty muihin "
-"koneisiin\n"
-"tai Internettiin. Koneessa ei ole salasanoja."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Salasanat ovat nyt k�yt�ss� mutta koneen k�ytt� verkossa ei ole suositeltua."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"T�m� on normaaliturvallisuustaso jota suositellaan tietokoneelle jota\n"
-"k�ytet��n Internettiin liitettyn�. J�rjestelm�ss� on "
-"turvallisuustarkastuksia."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"T�ll� turvallisuustasolla j�rjestelm�n k�ytt� palvelimena on mahdollista.\n"
-"J�rjestelm�� voidaan k�ytt�� palvelimena joka hyv�ksyy yhteyksi� monilta\n"
-"asiakkailta. "
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Pohjautuu edelliseen tasoon, mutta j�rjestelm� on kokonaan suljettu.\n"
-"Turvallisuusasetukset ovat tiukimmillaan."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Valitse turvataso"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Turvataso"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "K�yt� libsafea palvelimille"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Kirjasto joka suojelee puskurin ylivuoto ja merkkijonon muotovirhehykk�yksi� "
-"vastaan."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Tervetuloa %s kayttojarjestelmanvalitsijaan!\n"
-"\n"
-"Valitse k~^Dytt~^Tj~^Drjestelm~^D yll~^D olevasta listasta tai\n"
-"odota %d sekuntia oletusk~^Dynnistyst~^D.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Tervetuloa GRUB k~^Dytt~^Tj~^Drjestelm~^Dnvalitsijaan!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Kayt~^D %c- ja %c-napp~^Dimi~^D valitaksesi korostetun tietueen"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Paina enter kaynnist~^D~^Dksesi valitun kaytt�j�rjestelm�n, 'e' muokataksesi"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komennot ennen k�ynnistyst�, tai 'c' komentoriville"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Korostettu tietue k�ynnistet��n automaattisesti %d sekunnissa."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "ei tarpeeksi tilaa /boot-hakemistossa"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Ty�p�yt�"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "K�ynnistysvalikko"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Et voi asentaa k�ytt�j�rjestelm�n lataajaa partitiolle %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ohjeita ei ole viel� olemassa.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "K�ynnistyksen tavan asetus"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Tiedosto"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Tiedosto/_Poistu"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Uuden tyylin kategoroiva tarkkailija"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Uuden tyylin tarkkailija"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Perinteinen tarkkailija"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Perinteinen Gtk+ tarkkailija"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "K�yt� Auroraa k�ynnistyksen aikana"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub-tila"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot-tila"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"T�ll� hetkell� k�yt�ss� oleva j�rjestelm�lataaja on %s.\n"
-"Valitse Aseta k�ynnist��ksesi asennusohjelman."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "M��rittele"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "J�rjestelm�n tila"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "K�yt� X-Window-j�rjestelm��"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ei, en halua autologinia"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Kyll�, haluan autologinin (k�ytt�j�, ymp�rist�)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ei voi lukea tiedostoa /etc/inittab: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "Gt"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "Kt"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mt"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "Tt"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuuttia"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuutti"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekuntia"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Kuvankaappauksia ei voi tehd� ennen osiointia"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Kuvankaappaukset l�ytyv�t asennuksen j�lkeen hakemistosta %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Ranska"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgia"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "T'sekin tasavalta"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Saksa"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Kreikka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norja"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Ruotsi"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Alankomaat"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "It�valta"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Yhdysvallat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Tee ensin varmuuskopio tiedoistasi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lue tarkkaan!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jos aiot k�ytt�� aboot:ia, varmista ett� j�t�t vapaata tilaa levyn alkuun\n"
-"(2048 sektoria on tarpeeksi)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Virhe"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Velho"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Valitse toiminta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Sinulla on yksi suuri FAT-osio.\n"
-"(Yleens� Microsoft DOS/Windowsin k�yt�ss�).\n"
-"Ehdotus: muuta ensimm�iseksi osion kokoa\n"
-"(klikkaa osiota ja valitse sitten \"Uusi koko\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Klikkaa osiota"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Yksityiskohdat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journaloitu FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Tyhj�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Muut"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tiedostoj�rjestelmien tyypit:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Luo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tyyppi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "K�yt� sen sijaan ``%s'':��"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Poista"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "K�yt� ensin komentoa ``Irroita''"
-
-# mat
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Vaihdettuasi osion %s tyyppi� kaikki sill� olevat tiedot h�vi�v�t"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Valitse osio"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Valitse toinen osio"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Poistu"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Vaihda asiantuntijatilaan"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Vaihda normaalitilaan"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Peruuta"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Jatka joka tapauksessa?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Lopeta tallentamatta"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Lopeta kirjoittamatta osiotalua?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Haluatko tallentaa muutokset tiedostoon /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automaattinen varaus"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Tyhjenn� kaikki"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Kiintolevyn tiedot"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Kaikki prim��riosiot k�ytetty"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Uusia osioita ei voida lis�t�"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Voidaksesi luoda lis�� osioita tuhoa yksi olemassaoleva osio jotta voisit "
-"luoda laajennetun osion"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Tallenna osiotaulu"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Palauta osiotaulu"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Pelasta osiotaulu"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Uudelleenlataa osiotaulu"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Vaihdettavan median automaattinen liitt�minen"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Valitse tiedosto"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Osiotaulun varmuuskopio ei ole saman kokoinen\n"
-"Jatka silti?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Varoitus"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Aseta levyke asemaan\n"
-"Kaikki levykkeen tiedot h�vi�v�t"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Yrit�n osiotalulun palautusta"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Yksityiskohtaiset tiedot"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Liitospaikka"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Optiot"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Uusi koko"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Siirr�"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Alusta"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Liit�"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Lis�� RAIDiin"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Lis�� LVM:iin"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Irroita"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Poista RAIDista"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Poista LVM:st�"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Muokkaa RAIDia"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "K�yt� loopback-tiedostoa"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Luo uusi osio"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Aloitussektori: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Koko Mt: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tiedostoj�rjestelm�: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Liitospaikka: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Etuoikeus: "
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Poista loopback-tiedosto?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Muuta osiotyyppi�"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Mink� tiedostoj�rjestelm�n haluat?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Vaihdan ext2:sta ext3:een"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Minne haluat liitt�� loopback-tiedoston %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Minne haluat liitt�� laitteen %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ei voida poistaa liitospaikkaa koska osiota k�ytet��n loopback-tilassa.\n"
-"Poista loopback-tiedosto ensin"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Lasken FAT-tiedostoj�rjestelm�n rajoja"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Muutan kokoa"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "T�m�n osion kokoa ei voi muuttaa"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Kaikki osion tiedot tulee varmuuskopioida"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Osion %s koon muuttamisen j�lkeen kaikki osion tiedot tuhoutuvat"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Valitse uusi koko"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Uusi koko (Mt): "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Mille levylle haluat siirt��?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektori"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Mille sektorille haluat siirt��?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Siirr�n"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Siirr�n osiota..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Valitse olemassaoleva RAID johon lis�t��n"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "uusi"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Valitse olemassaoleva LVM johon lis�t��n"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM:n nimi?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Osiota ei voida k�ytt�� loopback-osiona"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback tiedostonimi: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Anna tiedostonimi"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Tiedosto on jo k�yt�ss� toiselle loopbackille, valitse toinen"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Tiedosto on jo olemassa. K�yt� sit�?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Liitt�misen optiot"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Useita"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "laite"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "taso"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "palan koko"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Varo: t�m� on vaarallinen toiminto"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Mink� tyyppinen osiointi?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"/boot hakemistoa ei voida luoda n�in kauas levyn alusta (sylinterille joka "
-"on > 1024).\n"
-"Joko k�yt�t LILOa ja se ei toimi, tai et k�yt� LILOa, jolloin et tarvitse /"
-"boot -hakemistoa"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Osio jolle valitsit juuren (/) on fyysisesti yli 1024 sylinterin levyll�,\n"
-"eik� sinulla ole /boot osiota.\n"
-"Jos haluat k�ytt�� LILO-k�ynnistyksenhallintaa, lis�� Linuxille /boot osio."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Olet valinnut ohjelmallisen RAID-osion juuriosioksi (/).\n"
-"Mik��n k�ynnistyslataaja ei osaa k�sitell� t�t� ilman /boot -osiota.\n"
-"Lis�� /boot -osio, jos haluat k�ytt�� liloa tai grubia"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Levyn %s osiotaulu kirjotetaan levylle!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Sinun t�ytyy k�ynnist�� kone uudelleen ennen kuin muutos tulee voimaan"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Kaikki osiolla %s olevat tiedot h�vi�v�t osion alustuksen yhteydess�"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Alustan"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Alustan loopback-osiota %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Alustan osiota %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Piilota tiedostot"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Siirr� tiedostot uuteen osioon"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Hakemisto %s sis�lt�� jo jotakin tietoa\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Siirr�n tiedostoja uudelle osiolle"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopioidaan %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Poistetaan %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "osio %s tunnetaan nyt nimell� %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Laite: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-asema: %s (vain arvaus)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tyyppi: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nimi: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Alkaa: sektori %s\n"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Koko: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektoria"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Sylinterist� %d sylinteriin %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Alustettu\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Ei alustettu\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Liitetty\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback tiedosto(t):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Osiolta k�ynnistet��n oletuksena\n"
-"    (MS-DOS k�ynnistys, ei lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Taso %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Palan koko %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-levyt %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback-tiedoston nimi: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"On mahdollista, ett� t�m� osio on\n"
-"ajuriosio. Sinun olisi kaiketi\n"
-"parasta j�tt�� se rauhaan.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"T�m� erityinen Bootsrap-\n"
-"osio on j�rjestelm�si\n"
-"kaksoisk�ynnist�miseksi.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Koko: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s sylinteri�, %s lukup��t�, %s sektoria\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Tietoja: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-levyt %s\n"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Osion tyyppi: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "v�yl�ss� %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Optiot: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Tiedostoj�rjestelm�n salausavain"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Valitse tiedostoj�rjestelm�si salausavain"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Salausavain on liian yksinkertainen (sen pit�� olla ainakin %d merkki� pitk�)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Salausavaimet eiv�t t�sm��"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Salausavain"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Salausavain (uudelleen)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Muuta tyyppi�"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Klikkaa mediaa"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Hae palvelimet"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s:n alustus %s:ta ep�onnistui"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "en osaa alustaa %s:�� tyyppi� %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck ep�onnistui virhekoodilla %d tai signaalilla %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "virhe irroitettaessa %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "yksinkertainen"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "palvelin"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Et voi k�ytt�� JFS:�� alle 16 Mt osioilla"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Et voi k�ytt�� ReiserFS:�� alle 32 Mt osioilla"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Liitospaikan pit�� alkaa /-merkill�."
-
-# mat
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "On jo olemassa osio, jonka liitospaikka on %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Et voi k�ytt�� LVM loogista taltiota liitekohtana %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "T�m�n hakemiston pit�isi olla juuritiedostoj�rjestelm�ss�"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Tarvitset t�h�n liitoskohtaan oikean tiedostoj�rjestelm�n (ext2, reiserfs)\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Et voi k�ytt�� salattua tiedostoj�rjestelm�� liitoskohdassa %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Vapaa tila ei riit� automaattiseen varaukseen"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Ei mit��n tekemist�"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Virhe kirjoitettaessa tiedostoon %s: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"On tapahtunut virhe - ei l�ytynyt ainuttakaan laitetta, joille voi luoda "
-"uuden tiedostoj�rjestelm�n. Tarkista laitteistosi korjataksesi ongelman"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Sinulla ei ole yht��n osiota!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Yll� olevassa listassa ovat kiintolevyilt� l�ytyneet Linux-osiot. Voit pit�� "
-"velhon \n"
-"tekem�t valinnat, sill� ne sopivat useimpiin asennuksiin. Jos teet "
-"muutoksia,\n"
-"sinun t�ytyy m��ritell� v�hint��n juuriosio (\"/\"). �l� valitse juureksi "
-"liian pient� \n"
-"osiota, sill� silloin kaikkia ohjelmia ei voida asentaa. Jos haluat "
-"tallettaa tiedot \n"
-"erilliselle osiolle, sinun t�ytyy luoda oma osio my�s \"/home\"-"
-"hakemistolle \n"
-"(mik� on mahdollista vain, jos sinulla on enemm�n kuin yksi Linux-osio).\n"
-"\n"
-"Jokaisesta osiosta on listattu seuraavat tiedot: \"Nimi\", \"Kapasiteetti"
-"\".\n"
-"\n"
-"\"Nimi\"-kohdan rakenne on: \"Kiintolevyn tyyppi\",  \"Kiintolevyn numero"
-"\",\n"
-"\"Osion numero\" (esimerkiksi \"hda1\").\n"
-"\n"
-"\"Kiintolevyn tyyppi\" on \"hd\", jos kiintolevysi on IDE-levy, ja \"sd\", "
-"jos \n"
-"se on SCSI-levy.\n"
-"\n"
-"\"Kiintolevyn numero\" on aina kirjain heti \"hd\":n tai \"sd\":n j�lkeen. \n"
-"IDE-asemilla:\n"
-"\n"
-"   * \"a\" tarkoittaa \"herraksi m��ritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"b\" tarkoittaa \"orjaksi m��ritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"c\" tarkoittaa \"herraksi m��ritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"d\" tarkoittaa \"orjaksi m��ritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"SCSI-levyill� \"a\" tarkoittaa \"pienin SCSI ID\", \"b\" taas \"toiseksi "
-"pienin \n"
-"SCSI ID\", jne..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linuxin asennus koostuu useasta CD-ROM-levyst�. DrakX\n"
-"tiet��, onko valittu paketti toisella CD:ll� ja osaa tarvittaessa sy�tt��\n"
-"nykyisen levyn ulos ja kysy� oikeaa."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Voit nyt valita mitk� palvelut haluat k�ynnist�� konetta k�ynnistett�ess�.\n"
-"\n"
-"T�ss� on lista kaikista palveluista, jotka l�ytyv�t nykyisest� "
-"asennuksesta.\n"
-"K�y lista l�pi huolellisesti ja poista kaikki ne palvelut, joita ei tarvita "
-"jokaisella\n"
-"k�ynnistyskerralla.\n"
-"\n"
-"Saat kustakin palvelusta lyhyen kuvaustekstin valitsemalla sen. Jos et\n"
-"kuitenkaan ole varma palvelun hy�dyllisyydest�, on yleens� varmempaa\n"
-"j�tt�� se oletusarvoiseksi.\n"
-"\n"
-"!! T�ss� vaiheessa sinun pit�� olla erityisen huolellinen, jos aiot k�ytt��\n"
-"konettasi palvelimena: et varmaankaan halua k�ynnist�� niit� palveluita,\n"
-"joita et tarvitse. Muista my�s, ett� jotkin palvelut voivat olla "
-"vaarallisia,\n"
-"jos ne ovat aktivoituja palvelimessa. Yleens� kannattaa valita vain\n"
-"ne palvelut, joita todella tarvitaan.\n"
-"!!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Kun kokeilet ensimm�ist� kertaa X:n asetuksiasi, et ole v�ltt�m�tt� kovin\n"
-"tyytyv�inen sen n�ytt��n (ruutu on liian pieni, siirtynyt vasemmalle tai\n"
-"oikealle...). Vaikka X k�ynnistyisikin oikein, DrakX kysyy sinulta, "
-"sopivatko\n"
-"asetukset sinulle. Se ehdottaa my�s my�s muutoksia n�ytt�m�ll� listan\n"
-"sen l�yt�mist� voimassa olevista n�ytt�tiloista, pyyt�en sinua valitsemaan\n"
-"niist� yksi.\n"
-"\n"
-"Jos et mill��n saa X:�� toiminaan, kannattaa viimeisen� valita \"Vaihda\n"
-"n�yt�nohjain\", sielt� \"Listaamaton kortti\", ja kun sinulta kysyt��n, "
-"mink�\n"
-"palvelimen haluat, valitse \"FBDev\". T�m� on vikasietoinen valinta, joka\n"
-"toimii kaikilla nykyaikaisilla n�yt�nohjaimilla. Lopuksi valitse \"Testaa\n"
-"uudelleen\" varmistaaksesi toimimisen."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Lopuksi sinulta kysyt��n, haluatko k�ynnistyksess� graafisen rajapinnan.\n"
-"Huomaa, ett� kysymys esitet��n vaikka et olisi testannut asetuksia.\n"
-"Haluat varmaankin vastata \"Ei\", jos koneesi on tarkoitettu palvelimeksi\n"
-"tai jos n�yt�n asetus ep�onnistui."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"T�ss� vaiheessa sinun pit�� valita mihin haluat asentaa Mandrake Linux\n"
-"-k�ytt�j�rjestelm�n. Jos kiintolevysi on tyhj� tai olemassaoleva "
-"k�ytt�j�rjestelm�\n"
-"k�ytt�� kaiken siin� olevan tilan, sinun pit�� osioida kiintolevysi. "
-"Yksinkertaistaen\n"
-"kiintolevyn osiointi koostuu levytilan jakamisesta loogisiin osiin tilan "
-"saamiseksi\n"
-"Mandrake Linux -j�rjestelm�lle.\n"
-"\n"
-"Koska osiointiprosessin vaikutukset ovat tavallisesti peruuttamattomia, voi\n"
-"osiointi olla pelottavaa ja stressaavaa kokemattomalle k�ytt�j�lle. Onneksi\n"
-"on olemassa velho, joka on tehty helpottamaan prosessia. Ennen kuin "
-"aloitat,\n"
-"k�yt� riitt�v�sti aikaa ohjekirjan lukemiseen.\n"
-"\n"
-"Jos asennus on asiantuntijatilassa, p��set DiskDrakeen, Mandrake Linuxin\n"
-"osiointity�kaluun, joka antaa sinun hienos��t�� osioitasi. Katso t�ss� "
-"tapauksessa\n"
-"ohjekirjan DiskDrakea koskeva kappale. Voit my�s k�ytt�� asennuksen velhoa\n"
-"painamalla dialogin \"Velho\"-painiketta.\n"
-"\n"
-"Jos osiot on jo m��ritelty, joko edellisess� asennuksessa tai jonkin toisen\n"
-"osiointity�kalun toimesta, voit yksinkertaisesti valita niist� ne, joihin "
-"haluat asentaa\n"
-"Linux-j�rjestelm�si.\n"
-"\n"
-"Jos osioita ei ole viel� m��ritelty, sinun pit�� luoda ne k�ytt�m�ll� "
-"velhoa.\n"
-"Riippuen kiintolevyn asetuksista, on k�yt�ss� erilaisia vaihtoehtoja:\n"
-"\n"
-" * \"K�yt� vapaa tila\": t�m� vaihtoehto osioi automaattisesti tyhj�t "
-"kovalevyt.\n"
-"Sinua ei vaivata p��t�si sen enemp��.\n"
-"\n"
-" * \"K�yt� olemassaolevaa osiota\": velho on l�yt�nyt yhden tai useamman\n"
-"olemassaolevan Linux.osion kiintolevyll�si. Jos haluat k�ytt�� niit�, "
-"valitse\n"
-"t�m� vaihtoehto.\n"
-"\n"
-" * \"K�yt� tyhj�� tilaa Windows-osiossa\": Jos Microsoft Windows on "
-"asennettuna\n"
-"kiintolevyllesi ja se k�ytt�� kaiken levyll� olevan tilan, sinun t�ytyy "
-"tehd� vapaata\n"
-"tilaa Linuxin tiedoille. Tehd�ksesi sen, voit tuhota Microsoft Windowsin "
-"k�ytt�m�n\n"
-"osion ja tiedot (katso kohta \"Tyhjenn� koko lavy\" tai \"Asiantuntijatila"
-"\") tai voit\n"
-"muuttaa Microsoft Windowsin k�ytt�m�n osion kokoa. Koon muuttaminen voidaan "
-"tehd� h�vitt�m�tt� mit��n levyll� olevista tiedoista. T�m� vaihtoehto on "
-"suositeltu,\n"
-"mik�li haluat k�ytt�� sek� Mandrake Linuxia ett� Microsoft Windowsia "
-"samalla\n"
-"tietokoneella.\n"
-"\n"
-"    Ennen kuin valitset t�m�n vaihtoehdon, sinun tulee tiet��, ett� "
-"Microsoft\n"
-"Windowsin k�ytt�m�n osion koko pienenee operaarion johdosta. Sinulla tulee\n"
-"siis olemaan nykyist� v�hemm�n tilaa uusien ohjelmien asentamiseen ja "
-"tietojen\n"
-"tallentamiseen Microsoft Windowsin alla.\n"
-"\n"
-" * \"Tyhjenn� koko lavy\": jos haluat tuhota kaikki levyll� olevan tiedon "
-"sek� sill�\n"
-"olevat osiot ja asentaa Mandrake Linux -j�rjestelm�n niiden tilalle, voit "
-"valita\n"
-"t�m�n vaihtoehdon. Ole varovainen, sill� et pysty en�� palauttamaan levyn "
-"sis�lt��\n"
-"ennalleen sen j�lkeen, kun olet hyv�ksynyt toiminnon.\n"
-"\n"
-"   !! Jos valitset t�m�n vaihtoehdon, kaikki levyll�si oleva tieto "
-"tuhoutuu. !!\n"
-"\n"
-" * \"Poista Windows\": t�m� yksinkertaisesti poistaa kaiken, mit� levyll� "
-"on, ja\n"
-"aloittaa puhtaasti osioimalla kaiken alusta alkaen. Kaikki levyll� oleva "
-"tieto tuhoutuu.\n"
-"\n"
-"   !! Jos valitset t�m�n vaihtoehdon, kaikki levyll�si oleva tieto "
-"tuhoutuu. !!\n"
-"\n"
-" * \"Asiantuntijatila\": jos haluat osioida kiintolevysi itse, voit valita "
-"t�m�n\n"
-"vaihtoehdon. Ole varovainen - t�m� on tehokas, mutta vaarallinen valinta.\n"
-"Voit todella helposti menett�� kaiken tiedon. Joten �l� valitse t�t� "
-"ratkaisua,\n"
-"ellet tied�, mit� olet tekem�ss�."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Kaikki vasta m��ritellyt osiot t�ytyy alustaa k�ytt�� varten (alustaminen\n"
-"tarkoittaa tiedostoj�rjestelm�n luontia).\n"
-"\n"
-"Samalla voit haluta alustaa uudelleen my�s olemassaolevia osioita\n"
-"poistaaksesi kaiken niiss� olevan tiedon. Jos haluat haluat tehd� niin,\n"
-"valitse my�s ne osiot.\n"
-"\n"
-"Huomaa, ett� sinun ei ole pakko alustaa kaikkia jo olemassa olevia\n"
-"osioita. Sinun pit�� alustaa ne osiot, joilla k�ytt�j�rjestelm�\n"
-"sijaitsee (kuten \"/\", \"/usr\" ja \"/var\"), mutta voit s�ilytt�� osiot,\n"
-"joilla henkil�kohtaiset tiedostosi sijaitsevat (tavallisesti \"/home\").\n"
-"\n"
-"Ole huolellinen osioita valitessasi. Alustamisen j�lkeen kaikki tieto\n"
-"valituilla osioilla on poissa eik� niiden palauttaminen en�� onnistu.\n"
-"\n"
-"Valitse \"Ok\", kun olet valmis alustamaan osiot.\n"
-"\n"
-"Valitse \"Peruuta\", jos haluat valita toisen osion Mandrake Linuxin\n"
-"asentamiseen.\n"
-"\n"
-"Valitse \"Lis�asetukset\", jos haluat valita osiot, jotka tarkistetaan "
-"levyll�\n"
-"olevien huonojen kohtien varalta."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Uutta Mandrake Linux -k�ytt�j�rjestelm��si asennetaan parasta aikaa.\n"
-"Asennettavien pakettien m��r�st� ja koneesi nopeudesta riippuen\n"
-"vie t�m� toiminto muutamasta minuutista useaan tuntiin.\n"
-"\n"
-"K�rsiv�llisyytt�."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Ennen jatkamista sinun pit�isi lukea huolellisesti lisenssin ehdot. "
-"Lisenssi\n"
-"kattaa koko Mandrake Linux -jakelun, ja jos et hyv�ksy kaikkia ehtoja,\n"
-"paina \"Kielt�ydy\"-painiketta joka keskeytt�� asennuksen heti. Jatkaaksesi\n"
-"asennusta paina \"Hyv�ksy\"-painiketta."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"T�ss� vaiheessa on aika valita tietokoneellesi sopiva turvataso.Yleisesti\n"
-"mit� avoimempi koneesi on ja mit� enemm�n t�rke�� tietoa on talletettu\n"
-"koneellesi, sit� korkeampi turvatason pit�isi olla. Huomaa kuitenkin, ett�\n"
-"korkeampi turvallisuustaso saavutetaan yleens� k�ytett�vyyden\n"
-"kustannuksella. Lue MSEC-kappale \"Reference Manualista\" saadaksesi\n"
-"lis�� tietoa turvatasojen merkityksest�.\n"
-"\n"
-"Jos et tied� mit� valita, k�yt� oletuksena olevaa vaihtoehtoa."
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"T�ss� vaiheessa sinun pit�� valita mille osioille haluat asentaa Mandrake "
-"Linux\n"
-"-k�ytt�j�rjestelm�n. Jos osiot on jo m��ritelty (edellisess� asennuksessa \n"
-"tai jonkin toisen osiointiohjelman toimesta), voit k�ytt�� olemassaolevia "
-"osioita.\n"
-"Muuten kiintolevyosiot t�ytyy m��ritt��.\n"
-"\n"
-"\n"
-"Luodaksesi osioita, sinun t�ytyy ensiksi valita kiintolevy. Voit valita \n"
-"levyn osioitavaksi painamalla \"hda\" ensimm�ille IDE-asemalle, \"hdb\"\n"
-"toiselle tai \"sda\" ensimm�iselle SCSI-levylle ja niin edelleen.\n"
-"\n"
-"\n"
-"Osioidaksesi valitun kiintolevyn, voit k�ytt�� seuraavia vaihtoehtoja:\n"
-"\n"
-"\n"
-"   * Tyhjenn� kaikki: t�m� valinta tuhoaa kaikki osiot valitulla "
-"kiintolevyll�.\n"
-"\n"
-"\n"
-"   * Automaattinen varaus: T�m� valinta luo automaattisesti Ext2- ja "
-"virtuaalimuistiosiot kiintolevysi k�ytt�m�tt�m�st� osasta.\n"
-"\n"
-"\n"
-"   * Pelasta osiointitaulu: jos osiointitaulu on vaurioitunut, voit yritt�� "
-"toipua vaurioista k�ytt�m�ll� t�t� valintaa.\n"
-"     Muista, ett� t�m� toimenpide voi my�s ep�onnistua.\n"
-"\n"
-"\n"
-"   * Peruuta: voit k�ytt�� t�t� valintaa peruaksesi tehdyt muutokset.\n"
-"\n"
-"\n"
-"   * Palauta: voit k�ytt�� t�t� valintaa, jos haluat perua kaikki muutokset "
-"ja palauttaa alkuper�isen osiointitaulun.\n"
-"\n"
-"\n"
-"   * Velho: jos haluat k�ytt�� velhoa kiintolevysi osiointiin, voit k�ytt� "
-"t�t� valintaa. T�m� on \n"
-"     suositeltu valinta, jos sinulla ei ole paljoa kokemusta osioinnista.\n"
-"\n"
-"\n"
-"   * Palauta levykkeelt�: jos olet tallentanut osiointitaulun levykkeelle, "
-"voit palauttaa tallennushetkell� \n"
-"     voimassa olleet asetukset.\n"
-"\n"
-"\n"
-"   * Tallenna levykkeelle: jos haluat tallentaa osiointitaulun levylle "
-"pysty�ksesi palauttamaan sen,\n"
-"     voit k�ytt�� t�t� valintaa. Suosittelen, ett� teet t�m�n ennen kuin "
-"muutat osiointitietoja.\n"
-"\n"
-"\n"
-"   * Valmis: kun olet osioinut kiintolevysi, k�yt� t�t� valintaa "
-"tallentaaksesi muutokset levylle.\n"
-"\n"
-"\n"
-"Kun osio on valittuna voit k�ytt��:\n"
-"\n"
-"\n"
-"           * Ctrl-c luodaksesi uuden osion (kun tyhj� osio on valittuna)\n"
-"\n"
-"           * Ctrl-d tuhotaksesi osion\n"
-"\n"
-"           * Ctrl-m asettaaksesi osion liitoskohdan tiedostoj�rjestelm�ss�\n"
-"\n"
-"\n"
-"Mik�li asennat j�rjestelm�� PPC-koneelta, haluat luoda pienen HFS "
-"'bootstrap'-osion, jonka koko on v�hint��n \n"
-"1 Mt yaboot-j�rjestelm�nlataajan k�ytt��n. Jos haluat, voit tehd� "
-"tuostaosiosta my�s suuremman, sanotaan 50 Mt, \n"
-"k�ytt��ksesi sit� varaytimen ja ramdisk-imagen tallentamiseksi j�rjestelm�n "
-"latauksen h�t�tilanteita varten."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Kiintolevylt� on l�ytynyt useampia kuin yksi Microsoft Windows -osio.\n"
-"Valitse niist� se, jonka kokoa haluat muuttaa pysty�ksesi asentamaan\n"
-"Mandrake Linuxn tietokoneeseesi.\n"
-"\n"
-"\n"
-"Tiedoksi: jokaisesta osiosta on listattu seuraavat tiedot: \"Nimi Linuxissa"
-"\", \n"
-"\"Nimi Windowsissa\", \"Kapasiteetti\".\n"
-"\n"
-"\n"
-"\"Nimi Linuxissa\" on koodattu seuraavalla tavalla: \"Kiintolevyn tyyppi"
-"\", \n"
-"\"Kiintolevyn numero\", \"Osion numero\" (esimerkiksi \"hda1\").\n"
-"\n"
-"\n"
-"\"Kiintolevyn tyyppi\" on \"hd\" jos kiintolevysi on IDE-levy ja \"sd\" jos "
-"se on\n"
-"SCSI-levy.\n"
-"\n"
-"\n"
-"\"Kiintolevyn kirjain\" on aina kirjain heti \"hd\":n tai \"sd\":n j�lkeen. "
-"IDE-asemilla:\n"
-"\n"
-"   * \"a\" tarkoittaa \"herraksi m��ritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"b\" tarkoittaa \"orjaksi m��ritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"c\" tarkoittaa \"herraksi m��ritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"d\" tarkoittaa \"orjaksi m��ritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"\n"
-"SCSI-levyill� \"a\" tarkoittaa \"ensisijainen kiintolevy\", \"b\" "
-"puolestaan\n"
-"\"toissijainen kiintolevy\", jne...\n"
-"\n"
-"\"Nimi Windowsissa\" on kiintolevysi kirjain Windowsin alla ( ensimm�inen "
-"levy\n"
-"tai osio on nimetty \"C:\":ksi)."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "K�rsiv�llisyytt�. T�m� toiminto voi kest�� useita minuutteja."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Valitse \"Asenna\", jos sinulla ei ole aikaisempaa versiota Mandrake "
-"Linuxsta\n"
-"asennettuna tai haluat k�ytt�� useaa k�ytt�j�rjestelm��.\n"
-"\n"
-"\n"
-"Valitse \"P�ivit�\", jos haluat p�ivitt�� olemassaolevan version Mandrake "
-"Linuxsta.\n"
-"\n"
-"\n"
-"Riippuen osaamisestasi GNU/Linux-j�rjestelmiss�, voit valita jonkin "
-"seuraavista tasoista Mandrake Linux -k�ytt�j�rjestelm�n asentamiseen tai "
-"p�ivitt�miseen:\n"
-"\n"
-"\n"
-"* Suositeltu: jos et ole ikin� asentanut GNU/Linux-k�ytt�j�rjestelm��, "
-"valitse t�m� vaihtoehto.\n"
-"  Asennus tulee olemaan helppo ja sinulta tullaan kysym��n vain muutama "
-"kysymys.\n"
-"\n"
-"\n"
-"* Mukautettu: jos tunnet GNU/Linuxin tarpeeksi hyvin, voit valita "
-"j�rjestelm�n tyypin k�yt�n mukaan\n"
-"  (ty�asema, palvelin, kehitys). Sinun tarvitsee vastata useampaan "
-"kysymykseen, kuin \"Suositellussa\" asennuksessa,\n"
-"  joten sinun t�ytyy tiet�� miten GNU/Linux toimii, jos haluat valita t�m�n "
-"asennusluokan.\n"
-"\n"
-"\n"
-"* Asiantuntija: jos tunnet GNU/Linux-j�rjestelm�n hyvin, voit valita t�m�n "
-"asennusluokan. Kuten\n"
-"  \"Mukautetussa\" asennuksessa, sinun t�ytyy valita ensisijainen "
-"k�ytt�kohde (ty�asema,\n"
-"  palvelin, kehitys). T�m� asennusluokka tarjoaa joustavimman asennuksen, "
-"mutta jotkin kysymykset\n"
-"  voivat osoittautua eritt�in vaikeiksi niille, jotka eiv�t tunne GNU/"
-"Linuxia riitt�v�n hyvin.\n"
-"  �l� valitse t�t� asennusluokkaa, ellet ole aivan varma, mit� olet "
-"tekem�ss�."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Tavallisesti DrakX valitsee sinulle oikean n�pp�imist�n (sen mukaan, mink�\n"
-"kielen olet valinnut) ja et edes n�e t�t� kohtaa. Kuitenkaan sinulla ei "
-"v�ltt�m�tt�\n"
-"ole n�pp�imist��, joka vastaa suoraan kielt�si. Jos olet esimerkiksi "
-"englanninkielinen\n"
-"sveitsil�inen, voit silti haluta sveitsil�isen n�pp�imist�n. Tai jos puhut "
-"Englantia,\n"
-"mutta asut Quebeciss�, sinulla voi olla samanlainen tilanne. Molemmissa "
-"tapauksissa\n"
-"sinun pit�� palata takaisin kyseiseen asennusvaiheeseen ja valita sopiva "
-"n�pp�imist�\n"
-"listasta.\n"
-"\n"
-"Paina \"Lis��\"-painiketta saadaksesi t�ydellisen listan tuetuista "
-"n�pp�imist�ist�. "
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Valitse mieleisesi kieli asennukseen ja j�rjestelm�n k�ytt��n.\n"
-"\n"
-"Painamalla \"Lis�asetukset\"-painiketta saat mahdollisuuden valita my�s\n"
-"muita kieli� asennettavaksi ty�asemallesi. Muiden kielien valitseminen\n"
-"asentaa kielikohtaiset tiedostot j�rjestelm�n dokumentoinnista ja\n"
-"ohjelmistoista. Esimerkiksi jos sinulla koneessasi Espanjalaisia k�ytt�ji�,\n"
-"valitse englanti (tai suomi) p��kieleksi ja lis�asetusten puolelta paina\n"
-"harmaata t�hte�, joka vastaa Espanjaa.\n"
-"\n"
-"Huomaa, ett� voit valita useita kieli�. Kun olet valinnut haluamasi "
-"ylim��r�iset\n"
-"kielet, paina \"Ok\"-painiketta jatkaaksesi."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"DrakX olettaa yleisesti, ett� sinulla on kaksin�pp�iminen hiiri ja kytkee\n"
-"sen kolmannen n�pp�imen emulaatiolla. DrakX tiet�� my�s\n"
-"automaattisesti, onko se PS/2, sarja- vai USB-hiiri.\n"
-"\n"
-"Jos haluat asettaa eri tyyppisen hiiren, valitse sopiva tyyppi oheisesta\n"
-"listasta.\n"
-"\n"
-"Jos valitset muun kuin oletushiiren, saat eteesi hiiren testiruudun. K�yt�\n"
-"hiiren nappeja ja rullaa varmistaaksesi, ett� asetukset ovat oikeat. Jos\n"
-"hiiri ei toimi kunnolla, paina v�lily�nti� tai enteri� peruttaaksesi, mink�\n"
-"j�lkeen voit valita uudelleen."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Valitse oikea portti. Esimerkiksi \"COM1\" portti Windowsissa\n"
-"on nimetty \"ttyS0\":ksi GNU/Linuxissa."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) ja grub ovat j�rjestelm�lataajia: ne voivat\n"
-"k�ynnist�� joko GNU/Linuxin tai mik� tahansa tietokoneellasi olevan\n"
-"k�ytt�j�rjestelm�n. Tavallisesti kaikki k�ytt�j�rjestelm�t tunnistuvat ja\n"
-"asentuvat oikein. Jos edellinen ei kuitenkaan pid� paikkaansa, voit lis�t�\n"
-"kyseisen kohdan k�sin t�ss� ruudussa. Ole huolellinen, ett� tulet\n"
-"valinneeksi oikeat parametrit.\n"
-"\n"
-"Jos et halua kenenk��n p��sev�n osaan k�ytt�j�rjestelmist�, voit\n"
-"tuhoa kyseiset kohdat. Mutta ett� siin� tapauksessa tarvitset itse\n"
-"k�ynnistyslevykett� p��st�ksesi kyseisiin k�ytt�j�rjestelmiin!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Sinun pit�� osoittaa paikka, jonne haluat asettaa tarvittavat tiedot\n"
-"GNU/Linuxin k�ynnist�miseksi.\n"
-"\n"
-"Jos et tied� tarkalleen mit� olet tekem�ss�, valitse \"Levyn ensimm�inen\n"
-"sektori (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX hakee koneeseen asennettuja PCI-v�yl�isi� SCSI-laitteita. \n"
-"Jos SCSI-laite l�ytyy ja DrakX tiet�� mit� ajuria k�ytt��, laite otetaan \n"
-"automaattisesti k�ytt��n.\n"
-"\n"
-"\n"
-"Jos tietokoneessasi ei ole SCSI-laitetta tai DrakX ei tunnista sinulla \n"
-"olevaa ISA- tai PCI-v�yl�ist� SCSI-laitetta, DrakX kysyy onko koneessasi\n"
-"SCSI-liitynt��. Jos ei, voit vallita \"Ei\". Jos valitset \"Kyll�\", tulee \n"
-"n�kyviin lista ajureista, josta voit valita sinulla olevan laitteen.\n"
-"\n"
-"\n"
-"Jos sinun t�ytyy valita ajuri manuaalisesti, DrakX kysyy, haluaisitko "
-"m��ritt��\n"
-"sille lis�optioita. Sinun kannattaa antaa DrakX:n tutkia laitteistosi "
-"optioiden\n"
-"l�yt�miseksi, sill� yleens� kyseinen toiminto toimii hyvin.\n"
-"\n"
-"\n"
-"Jos ei, sinun pit�� itse antaa optiot kyseiselle ajurille. Katso lis�tietoja "
-"k�ytt�ohjeesta\n"
-"(luku 3, osa \"Collective informations on your hardware\"), jossa on "
-"vinkkej�\n"
-"miten n�m� tiedot l�ytyv�t laitteiston ohjekirjoista, "
-"laittteistovalmistajan\n"
-"webbisivuilta (jos sinulla on internetyhteys) tai Microsoft Windowsista "
-"(jos\n"
-"se on asennettu tietokoneeseesi)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Valitse kiintolevy, jonka haluat tyhjent�� uudelle Mandrake Linux -osiolle.\n"
-"Ole varovainen, koska kaikki asemalla oleva tieto tuhoutuu eik� ole en��\n"
-"palautettavissa!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Paina \"OK\", jos haluat tuhota kaiken t�ll� kiintolevyll� olevan tiedon\n"
-"sek� osiot. Ole varovainen, sill� painettuasi \"OK\" et voi en�� palauttaa\n"
-"mit��n t�ll� kiintolevyll� olleita tietoja ja osioita, mukaanlukien kaikki\n"
-"Windows-tiedostot.\n"
-"\n"
-"Paina \"Peruuta\" keskeytt��ksesi t�m�n toiminnon ilman ett� menet�t\n"
-"mit��n kiintolevyll� ollutta tietoa ja osoita."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Sinun t�ytyy my�s alustaa %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Olet valinnut seuraavat palvelimet: %s\n"
-"\n"
-"\n"
-"N�m� palvelimet otetaan oletuksena k�ytt��n. Niiss� ei ole tunnettuja \n"
-"turvallisuusaukkoja, mutta sellaisia voi l�yty� ajan mittaan. Mik�li niin \n"
-"tapahtuu, pit�isi sinun p�ivitt�� kyseiset palvelimet niin nopeasti kuin \n"
-"suinkin mahdollista.\n"
-"\n"
-"\n"
-"Haluatko todella asentaa n�m� palvelimet?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Aseta tyhj� FAT-alustettu levyke levyasemaan %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "T�m� levyke ei ole FAT-alustettu"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"K�ytt��ksesi t�t� \"tallennetut paketit\" valintaa, k�ynnist� asennus "
-"optiolla \"linux defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Virhe lukiessa tiedostoa %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Jokin osa laitteistoasi tarvitsee laitteistovalmistajan ajurit toimiakseen "
-"kunnolla.\n"
-"Voit l�yt�� lis�tietoja edell�mainituista t��lt�: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Sinulla tulee olla juuriosio.\n"
-"T�t� varten luo osio (tai klikkaa olemassaolevaa).\n"
-"Valitse sitten toiminto ``Liitospaikka'' ja aseta se arvoon `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Sinulla tulee olla heittovaihtotiedosto"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Sinulla ei ole heittovaihto-osiota\n"
-"\n"
-"Jatka kuitenkin?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Sinulla pit�� olla FAT-osio liitettyn� hakemistoon /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "K�yt� tyhj�� tilaa"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ei tarpeeksi tilaa uusien osioiden luomiseksi"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "K�yt� olemassa olevia osioita"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Ei ole olemassa olevaa osiota k�ytett�v�ksi"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "K�yt� Windows-osiota loopback-tiedostona"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Mille osiolle haluat laittaa Linux4Win:in?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Valitse koot"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Juuriosion koko Mt: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Sivutusosion koko Mt: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "K�yt� tyhj�� tilaa Windows-osiolla"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Mink� osion kokoa haluat muuttaa?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Lasken Windows-tiedostoj�rjestelm�n rajoja"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT-j�rjestelm�n koon muuttaja ei osaa k�sitell� osiotasi,\n"
-"saatiin seuraava virhe: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Windows-osiosi on liian pirstoutunut, mene Windowsiin ja aja \"defrag\" ensin"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"VAROITUS!\n"
-"\n"
-"DrakX aikoo nyt muuttaa Windows-osiosi kokoa. Ole varovainen:\n"
-"t�m� toimenpide on vaarallinen. Jos et ole viel� tarkistanut \n"
-"Windows-osioitasi, sinun tulisi poistua asennuksesta, ajaa\n"
-"kiintolevyjen tarkistus Windowsissa (sek� mahdollisesti my�s\n"
-"eheytt�� levyt). Sen j�lkeen voit aloittaa asennuksen uudelleen.\n"
-"Samalla suosittelen ottamaan varmuuskopiot t�rkeist� tiedoista.Kun olet "
-"varma, paina Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Kuinka paljon tilaa haluat s�ilytt�� Windowsilla"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "osio %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-tiedostoj�rjestelm�n koon muuttaminen ep�onnistui: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ei ole FAT-osioita, joiden kokoa voisi muuttaa tai k�ytt�� loopback-"
-"tiedostoina (tai osiot ovat t�ynn�)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Tyhjenn� koko levy"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Poista Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Sinulla on enemm�n kuin yksi kiintolevy. Mille haluat asentaa Linuxin?"
-
-# mat
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "KAIKKI olemassaolevat osiot ja niiss� oleva tieto tuhoutuu asemalta %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Mukautettu levyn osiointi"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "K�yt� fdiski�"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Voit nyt osioda kiintolevysi %s\n"
-"Kun olet valmis, �l� unohda tallettaa asetuksia komennolla `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Sinulla ei ole tarpeeksi tilaa Windows-osiollasi"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ei ole tarpeeksi tilaa asentamiseen"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX-Osiointivelho l�ysi seuraavat ratkaisut:"
-
-# mat
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Osiointi ep�onnistui: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "K�ynnist�n verkkoa"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Ajan alas verkkoa"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Tapahtui virhe, sit� ei voida k�sitell� kunnolla.\n"
-"Jatka omalla riskill�si."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Kahdentunut liitospaikka %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Osa t�rkeist� paketeista j�i asentamatta loppuun asti.\n"
-"Joko cdrom-asemasi tai levy on viallinen.\n"
-"Tarkista cdrom Linux-koneessa k�ytt�m�ll� \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-# mat
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Tervetuloa %s:n"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ei levykeasemaa k�ytett�viss�"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Siirryn vaiheeseen `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"J�rjestelm�si resurssit ovat lopussa. Voit kohdata ongelmia Mandrake Linuxa "
-"asentaessasi.\n"
-"Jos n�in tapahtuu, voit kokeilla tekstipohjaista asennusta. Tehd�ksesi niin "
-"paina `F1' kun\n"
-"k�ynnist�t asennusohjelmaa CDROM-asemasta. T�m�n j�lkeen kirjoita `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Asennusluokka"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Valitse yksi seuraavista asennusluokista:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Valitsemiesi ryhmien kokonaiskoko on suunnilleen %d Mt.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Jos haluat asentaa v�hemm�n kuin t�m� koko,\n"
-"valitse prosenttiosuus paketeista jonka haluat asentaa.\n"
-"\n"
-"Pieni prosenttiosuus asentaa vain t�rkeimm�t paketit,\n"
-"100%% osuus asentaa kaikki paketit."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Sinulla on levyll� tilaa vain %d%% paketeista\n"
-".Jos haulat asentaa v�hemm�n kuin t�m�n osan,\n"
-"valitse prosenttiosuus paketeista jotka haluat asentaa.\n"
-"Pieni prosentti asentaa vain t�rkeimm�t paketit, %d%%\n"
-" prosenttiosuus asentaa niin monta pakettia kuin on mahdollista."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Voit valita paketit tarkemmin seuraavassa vaiheessa"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Prosenttiosuus asennettavista paketeista"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Pakettiryhmien valinta"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Yksitt�isten pakettien valinta"
-
-# mat
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Koko yhteens�: %d / %d Mt"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Viallinen paketti"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nimi: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versio: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Koko: %d Kt\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "T�rkeys: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Et voi asentaa t�t� pakettia, koska levyll� ei ole tarpeeksi tilaa sen "
-"asentamiseksi"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Seuraavat paketit asennetaan"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Seuraavat paketit poistetaan"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Et voi valita/poistaa t�t� pakettia"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "T�m� on pakollinen paketti, sit� ei voida poistaa valinnoista"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Et voi poistaa t�m�n paketin valintaa. Se on jo asennettu"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"T�m� paketti tulee p�ivitt��\n"
-"Oletko varma ett� haluat poistaa valinnan?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Et voi poistaa t�m�n paketin valintaa. Paketti pit�� p�ivitt��."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "N�yt� automaattisesti valitut paketit"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Asenna"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Lataa/Tallenna levykkeelle"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "P�ivit�n pakettien valintaa"
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimaalinen asennus"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Valitse asennettavat paketit"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Asennan"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Arvioin aikaa"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "J�ljell� "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Valmistelen asennusta"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakettia"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Asennan pakettia %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Hyv�ksy"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Hylk��"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Vaihda CD-levy�!\n"
-"\n"
-"Aseta CD-levy nimelt��n \"%s\" CD-asemaan ja paina Ok kun olet valmis.\n"
-"Jos sinulla ei ole levy�, paina Peruuta v�ltt��ksesi asennukset t�lt� "
-"levylt�."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Jatka kuitenkin?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Tapahtu virhe j�rjestett�ess� paketteja:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Tapahtu virhe asennettaessa paketteja:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Varoitus\n"
-"\n"
-"Lue huolellisesti alla olevat ehdot. Jos et ole samaa mielt� kaikkien\n"
-"ehtojen kanssa, sinulla ei ole oikeuksia asentaa seuraavaa CD-levy�.\n"
-"Paina 'Kielt�ydyn' jos haluat jatkaa asennusta k�ytt�m�tt� n�it� osia.\n"
-"\n"
-"\n"
-"Jotkin seuraavalla CD-levyll� olevat komponentit eiv�t ole GPL:n tai \n"
-"vastaavanlaisen lisenssin alaisia. Jokaisen t�llaisen komponentin ehdot \n"
-"on m��ritelty erikseen niiden omien lisenssien mukaan. Tutustu n�ihin \n"
-"lisensseihin huolellisesti ennen kuin k�yt�t tai levit�t n�it� "
-"komponentteja \n"
-"eteenp�in. T�llaiset lisenssit kielt�v�t tavallisesti siirt�misen, "
-"kopioimisen\n"
-"(lukuunottamatta varmuuskopioita), uudelleenlevityksen, "
-"k��nteissuunnittelun \n"
-"bin��rikoodin k��nt�misen tai muokkaamisen. Jokainen rike sopimusta \n"
-"vastaan p��tt�� oikeutesi kyseiseen lisenssiin. Ellei ole olemassa "
-"erityisi� \n"
-"ehtoja, jotka sallivat ohjelmiston asentamisen useaan koneeseen tai \n"
-"niiden k�ytt�mist� verkon yli, et saa my�sk��n tehd� niin. Jos et ole \n"
-"varma kaikista ehdoista, ota yhteys suoraan kyseisen komponentin \n"
-"tekij��n tai jakelijaan. Yll� mainittujen komponenttien tai niiden \n"
-"dokumentaation saattaminen kolmannen osapuolen k�siin on tavallisesti \n"
-"kieletty.\n"
-"\n"
-"\n"
-"Kaikki oikeudet seuraavan levyn komponentteihin kuuluvat niiden \n"
-"asianomaisille tekij�ille ja ne on suojattu yksityisen omaisuuden ja \n"
-"ohjelmiston tekij�noikeuslakien avulla.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Tapahtui virhe"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Haluatko todella poistua asennuksesta?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lisenssin hyv�ksyminen"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "N�pp�imist�"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Valitse n�pp�imist�si asettelu."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "T�ss� on koko lista olemassa olevista n�pp�imist�ist�"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Valitse asennuksen luokka?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Asenna/P�ivit�"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Onko t�m� asennus vai p�ivitys?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Suositeltu"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Asiantuntija"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "P�ivit�"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "P�ivit� vain paketit"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Valitse hiiren tyyppi."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Hiiren portti"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Mihin sarjaporttiin hiiresi on liitetty."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "N�pp�inemulaatio"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "2. n�pp�imen emulaatio"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "3. n�pp�imen emulaatio"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Asetan PCMCIA kortteja...."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Asetan IDE-levy�"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ei vapaita osioita"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Tarkistan osioita l�yt��kseni liitoskohdat"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Valitse liitospaikat"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Osiotaulua ei voida lukea, siin� on liikaa virheit� :(\n"
-"Asennusta voidaan jatkaa yritt�m�ll� tyhjent�� virheelliset osiot\n"
-"(KAIKKI TIETO tuhoutuu!). Toinen vaihtoehto on kielt�� DrakX:��\n"
-"muokkaamasta osiointitaulua. (virhe on: %s)\n"
-"\n"
-"Hyv�ksytk� kaikkien osioiden menett�misen?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ei pystynyt lukemaan osiotaulua oikein.\n"
-"Jatka omalla vastuullasi!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Ei vapaata tilaa 1 Mt:n k�ynnistyslohkoa varten! Asennusta jatketaan, mutta "
-"k�ynnist��ksesi j�rjestelm�n, sinun pit�� luoda k�ynnistyslohko-osio "
-"DiskDrakessa."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "P�ivitykseen tarvittavaa juuriosiota ei l�ytynyt"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Juuriosio"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Mik� on j�rjestelm�si juuriosio (/) ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Sinun tulee k�ynnist�� j�rjestelm� uudelleen jotta muutokset tulevat voimaan"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Valitse alustettavat osiot"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Tarkista vialliset lohkot?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Alustan osioita"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Luon ja alustan tiedostoa %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Heittovaihtotiedosto ei ole riitt�v�n suuri, suurenna sit�"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Etsin saatavilla olevia paketteja"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Etsin p�ivitett�vi� paketteja"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"J�rjestelm�ss�si ei ole riitt�v�sti tilaa asennukseen tai p�ivitykseen (%d > "
-"%d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "T�ydellinen (%dMt)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimi (%dMt)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Suositeltu (%dMt)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Lataa tai tallenna pakettien valinta levykkeelle.\n"
-"Muoto on sama kuin auto_install-toiminnon luomilla levykkeill�."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Lataa levykkeelt�"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Ladataan levykkeelt�"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Pakettien valinta"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Aseta levyke, jossa on pakettien valinta"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Tallenna levykkeelle"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Valittu koko on suurempi kuin olemassa oleva levytila"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Asennuksen tyyppi"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Et ole valinnut yht�k��n pakettiryhm��\n"
-"Valitse haluamasti minimaalinen asennus"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "X:ll�"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Perusdokumentaation kanssa (suositeltu!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Pienin mahdollinen asennus (erityisesti ei urpmia)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Jos sinulla on kaikki CD.levyt allaolevalta listalta, paina OK.\n"
-"Jos sinulla ei ole mit��n levyist�, paina Peruuta.\n"
-"Jos jotkut levyist� puuttuvat, poista niiden valinnat, ja paina OK."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom nimelt��n \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Valmistelen asennusta"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Asennan pakettia %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Asennuksen j�lkeiset toiminnot"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Aseta k�ytt�m�si k�ynnistyslevyke asemaan %s"
-
-# mat
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Aseta moduulien p�ivityslevyke asemaan %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Sinulla on nyt mahdollisuus hakea internetist� ne ohjelmistot, jotka on \n"
-"suunnattu tiedon salakirjoittamiseen.\n"
-"\n"
-"VAROITUS:\n"
-"\n"
-"N�it� ohjelmistoja koskevien eri tasoisten vaatimusten ja eri "
-"lains��d�nt�jen \n"
-"m��r�ysten vuoksi n�iden ohjelmistojen asiakkaan ja/tai loppuk�ytt�j�n \n"
-"pit�� varmistaa, ett� h�nen maansa lains��d�nt� sallii h�nen hakea, "
-"tallentaa \n"
-"ja k�ytt�� n�it� ohjelmistoja.\n"
-"\n"
-"Lis�ksi asiakkaan ja/tai loppuk�ytt�j�n tulee olla erityisen varmoja siit�, "
-"etteiv�t \n"
-"he riko maansa lains��d�nt�� vastaan.Mik�li asiakas ja/tai loppuk�ytt�j� "
-"ei \n"
-"noudata n�iden lakien m��r�yksi�, heille voidaan langettaa vakaviakin \n"
-"rangaistuksia.\n"
-"\n"
-"Miss��n tilanteissa ei Mandrakesoft tai sen valmistajat ja/tai "
-"j�lleenmyyj�t \n"
-"ole vastuuvelvollisia erityisiin, ep�suoriin tai satunnaisiin vahinkoihin, "
-"jotka\n"
-"voivat aiheutua (mukaan lukien, mutta ei rajoittuen: tulonmenetykset, \n"
-"yritystoiminnan katkeaminen, kaupallisten tietojen menetys ja muut \n"
-"rahalliset menetykset, sek� mahdolliset vahingonkorvaukset, jotka oikeus \n"
-"p��tt�� langettaa). ohjelmiston k�ytt�misest�, hallussapidosta, tai "
-"pelk�st� \n"
-"internetist� hakemisesta, jossa asiakas ja/tai loppuk�ytt�j� voi saada \n"
-"haltuunsa n�m� ohjelmistot hyv�ksytty��n t�m�n sopimuksen.\n"
-"\n"
-"\n"
-"Mihin tahansa t�t� sopimusta koskeviin tiedusteluihin, ota yhteys:"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Sinulla on nyt mahdollisuus hakea p�ivitetyt paketit, jotka on julkaistu\n"
-"jakelun ilmestymisen j�lkeen.\n"
-"\n"
-"Saat turva- ja ohjelmistokorjaukset, mutta tarvitset toimivan internet-\n"
-"yhteyden jatkaaksesi.\n"
-"\n"
-"Haluatko asentaa p�ivitykset ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Otan yhteytt� Mandrake Linuxin sivustolle saadakseni listan olemassaolevista "
-"peileist�"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Valitse peilij�rjestelm� josta paketit haetaan"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Yhdist�n peilij�rjestelm��n hakeakseni uusimman pakettilistan"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Mik� on j�rjestelm�si aikavy�hyke?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Laitteistokello asetettu GMT-aikaan"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automaattinen kellon synkronisointi (k�ytt�en NTP:t�)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Ulkoinen CUPS-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Ei kirjoitinta"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Onko sinulla muita?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Johtop��t�s"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Hiiri"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Aikavy�hyke"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Kirjoitin"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN-kortti"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "��nikortti"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-kortti"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Paikalliset tiedostot"
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Yll�pit�j�n salasana"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Ei salasanaa"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Salasana on liian yksinkertainen (sen tulee olla ainakin %d merkki� pitk�)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Tunnistustapa"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Tunnistus LDAPilla"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP perus-dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Tunnistus NIS:ll�"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS-alue"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Mukautetulla k�ynnistyslevykkeell� voit k�ynnist�� j�rjestelm�n ilman\n"
-"tavanomaisen k�ytt�j�rjestelm�lataajan apua. T�st� on hy�ty�, jos et halua\n"
-"asentaa SILOa j�rjestelm��si, toinen k�ytt�j�rjestelm� poistaa SILOn,\n"
-"tai SILO ei toimi laitteistossasi. Mukautettua k�ynnistyslevykett� voidaan\n"
-"k�ytt�� my�s Mandraken vikasietolevykkeen kanssa, jolloin vakavista\n"
-"j�rjestelm�n virhetilanteista on helpompi toipua.\n"
-"\n"
-"Jos haluat luoda k�ynnistyslevykkeen j�rjestelm��si, aseta levyke\n"
-"ensimm�iseen asemaan ja paina \"Ok\","
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Ensimm�inen levyasema"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Toinen levyasema"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Ohita"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Mukautetulla k�ynnistyslevykkeell� voit k�ynnist�� j�rjestelm�n ilman\n"
-"tavanomaisen k�ytt�j�rjestelm�lataajan apua. T�st� on hy�ty�, jos et halua\n"
-"asentaa LILOa (tai grubia) j�rjestelm��si, toinen k�ytt�j�rjestelm� poistaa\n"
-"LILOn, tai LILO ei toimi laitteistossasi. Mukautettua k�ynnistyslevykett� "
-"voidaan\n"
-"k�ytt�� my�s Mandraken vikasietolevykkeen kanssa, jolloin vakavista\n"
-"j�rjestelm�n virhetilanteista on helpompi toipua.\n"
-"Haluatko luoda k�ynnistyslevykkeen j�rjestelm��si?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Levyajuria ei ole saatavilla"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Valitse levyasema jolla luot k�ynnistyslevykkeen"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Aseta levyke asemaan %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Luon k�ynnistyslevykett�"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Valmistelen k�ytt�j�rjestelm�n lataajaa"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Sinulla on vanhanaikainen tai tuntematon tietokone,\n"
-"joten yaboot j�rjestelm�nlataaja ei toimi koneessasi.\n"
-"Asennus jatkuu, mutta sinun t�ytyy k�ytt�� BootX:��\n"
-"koneesi k�ynnist�miseen"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Haluatko k�ytt�� aboot:ia?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Virhe asennettaessa aboot:a,\n"
-"yrit� pakkoasennusta vaikka se tuhoaa ensimm�isen osion?"
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Asennan k�ytt�j�rjestelm�n lataajaa"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "J�rjestelm�lataajan asennus ep�onnistu. Seuraava virhe tapahtui:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Sinun pit�� ehk� muuttaa Open Firmware -k�ynnistyslaitetta\n"
-"aktivoidaksesi j�rjeslelm�lataajan. Jos et n�e j�rjeslelm�lataajaa\n"
-"k�ynist�ess�si konettasi uudelleen, Paina Command-Option-O-F\n"
-"k�ynnistyksen yhteydess� ja kirjoita:\n"
-"setenv boot-device %s,\\\\:tbxi\n"
-"sitten kirjoita: shut-down\n"
-"Seuraavalla k�ynnistyskerralla sinun pit�isi n�hd� k�ynnistyslataajan\n"
-"komentokehoite."
-
-# mat
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Aseta tyhj� levyke levyasemaan %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Valmistelen automaattiasennuslevykett�"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Joitain vaiheita ei ole saatettu loppuun.\n"
-"\n"
-"Haluatko todella lopettaa?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Onnittelut, asennus on valmis.\n"
-"Poista k�ynnistett�v� media ja paina Enter k�ynnist��ksesi koneen "
-"uudelleen.\n"
-"\n"
-"\n"
-"L�yd�t t�h�n Mandrake Linuxin versioon olemassaolevat korjaukset ja\n"
-"korjattujen virheiden listan osoitteesta:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"J�rjestelm�n asettamisesta saat tietoja virallisen Linux Mandraken\n"
-"k�ytt�j�oppaan j�lkiasennuskappaleesta."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Valmistelen automaattista asennuslevykett�"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automaattinen asennus voi olla t�ysin automatisoitu,\n"
-"jos niin halutaan. Siin� tapauksessa asennus t�ytt��\n"
-"koko kiintolevyn! (tarkoitettu toisen koneen asentamiseksi),\n"
-"\n"
-"Ehk� haluat mieluummin toistaa asennuksen.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automaattinen"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Toista"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Yksitt�isten pakettien valinta"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Asennus %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> vaihtaa elementti�  | <Space> valitsee | <F12> seuraava "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu puuttuu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Valitse tiedosto"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Lis�asetukset"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Perusasetukset"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Odota hetki"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Tietoja"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Laajenna puu"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sulje puu"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Vaihda tasaisen ja ryhm�j�rjestyksen v�lill�"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Huono valinta, yrit� uudelleen\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Valintasi? (oletus %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Kohdat, jotka sinun pit�� t�ytt��:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Valintasi? (0/1, oletus '%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Painike '%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Haluatko klikata t�t� painiketta? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Valintasi? (oletus '%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> On monta asiaa, joista valita (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Valitse ensimm�inen numero 10-v�list�, jota haluat muokata,\n"
-"tai paina vain Enter jatkaaksesi.\n"
-"Valintasi? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Huomaa, nimike vaihtui:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "L�het� uudelleen"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tsekki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Saksa"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Espanja"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Suomi"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Ranska"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norja"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Puola"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ven�j�"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Ruotsi"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK n�pp�imist�"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US n�pp�imist�"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albaani"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armeenia (vanha)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armeenia (kirjoituskone)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armeenia (foneettinen)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgia"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgaria (foneettinen)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaria (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilia"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Valkoven�j�"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Sveitsi (Saksalainen j�rjestys)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Sveitsi (Ranskalainen j�rjestys)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tsekki (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Saksa (ei kuolleita n�pp�imi�)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Tanska"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Norja (Dvorak)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Ruotsi)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Eesti"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgia (\"Ven�l�inen\"-j�rjestys)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgia (\"Latin\"-j�rjestys)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Kreikka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Unkari"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroatia"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israeli"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israeli (Foneettinen)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iran"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islanti"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italia"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japani 106-n�pp�iminen"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korealainen n�pp�imist�"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinalainen amerikka"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Liettua AZERTY (vanha)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Liettua AZERTY (uusi)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Liettua \"numerorivi\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Liettua \"foneettinen\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvia"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonia"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Hollanti"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Puola (qwerty j�rjestys)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Puola (qwertz j�rjestys)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugali"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romania (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romania (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ven�j� (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovenia"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakia (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakia (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbia (cyrillic)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai-n�pp�imist�"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik-n�pp�imist�"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkki (perinteinen \"F\"-malli)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkki (perinteinen \"Q\"-malli)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukraina"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US n�pp�imist� (kansainv�linen)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamilainen \"numerorivi\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavia (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-#, fuzzy
-msgid "Left \"Windows\" key"
-msgstr "Hae Windowsin kirjasimet"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Rengasmaisia liitoksia %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Poista loogiset osiot ensin\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "PCMCIA:ta ei tueta en�� 2.2-sarjan ytimiss�. K�yt� 2.4 ydint�."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Hiiri"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Yleinen PS2 rullahiiri"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 n�pp�in"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Yleinen 2-nappinen hiiri"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Yleinen"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rulla"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "sarja"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Yleinen 3-nappinen hiiri"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sarja, vanha C7 tyyppi)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "v�yl�hiiri"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 n�pp�int�"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 n�pp�int�"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ei mik��n"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Ei hiirt�"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Testaa hiiri"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Aktivoidaksesi hiiren,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "PY�RIT� HIIREN RULLAA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Loppu"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Seuraava ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Edellinen"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Onko t�m� oikein?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Ota yhteys internettiin"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Yleisin tapa liitty� asdl-verkkoon on k�ytt�� pppoe:a.\n"
-"Jotkin yhteydet k�ytt�v�t pptp:t�, muutamat dhcp:t�.\n"
-"Jos et tied�, mit� valita, valitse 'k�yt� pppoe:a'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "k�yt� dhpc:t�"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "k�yt� pppoe:a"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "k�yt� pptp:t�"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Mit� dhcp-asiakasohjelmaa haluat k�ytt��?\n"
-"Oletus on dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ethernet-verkkokorttia ei l�ytynyt j�rjestelm�st�.\n"
-"Ei voida asentaa t�m�n tyyppist� yhteytt�."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Valitse verkkoliittym�"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Valitse mit� verkkokorteista haluat k�ytt�� internetiin liittymiseen"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "verkkokorttia ei l�ytynyt"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Asetan verkkoa"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Sy�t� koneesi nimi, jos tied�t sen.\n"
-"Jotkin DHCP-palvelimet tarvitsevat koneen nimen toimiakseen.\n"
-"Koneesi nimen pit�isi olla t�ysin laillinen nimi, kuten\n"
-"\" minunkone.omapaikka.net\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Koneen nimi"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Verkkoasetusten velho"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Ulkoinen ISDN-modeemi"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Sis�inen ISDN-kortti"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Mink�lainen ISND-yhteytesi on?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Mit� ISDN-asetuksia haluat k�ytt��?\n"
-"\n"
-"* Vanha asetusj�rjestelm� k�ytt�� isdn4net:i�. Se sis�lt�� tehokkaat\n"
-"  ty�kalut, mutta on vaikea asettaa, eik� se ole standardi.\n"
-"\n"
-"* Uusi asetusj�rjestelm� on helpompi ymm�rt��, enemm�n k�yt�ss',\n"
-"  mutta se sis�lt�� v�hemm�n ty�kaluja.\n"
-"\n"
-"Suositus on k�ytt�� uutta ja kevyemp�� asetusj�rjestelm��.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Uusi kokoonpano (isdn-kevyt)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Vanha kokoonpano (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN:n asetus"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Valitse palveluntarjoajasi.\n"
-" Jos se ei ole listassa, valitse `Ei listattu'"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Eurooppalainen protokolla"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Eurooppalainen protokolla (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Muun maailman k�ytt�m� protokolla"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Muun maailman k�ytt�m� protokolla \n"
-" ei D-kanavaa (leased lines)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Mit� protokollaa haluat k�ytt��?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Millainen kortti sinulla on?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "En tied�"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Jos sinulla on ISA-kortti, seuraavien arvojen pit�isi olla oikeat.\n"
-"\n"
-"Jos sinulla on PCMIA-kortti sinun t�ytyy tiet�� korttisi IRQ ja IO.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Hylk��"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Jatka"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Mik� ISDN-kortti sinulla on?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Olen havainnut ISDN PCI-kortin, mutta en tunnista tyyppi�. Valitseyksi "
-"seuraavassa ruudussa olevista korteista."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ISDN PCI-korttia ei l�ydetty. Valitse yksi seuraavasta ruudusta."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Valitse sarjaportti, johon modeemisi on kytketty."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Soittoasetukset"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Yhteyden nimi"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Puhelinnumero"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "K�ytt�j� ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Script-pohjainen"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminaalipohjainen"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Verkkoalueen nimi"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Ensimm�inen nimipalvelin (ei pakollinen)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Toinen nimipalvelin (ei pakollinen)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Voit joko katkaista yhteyden tai asettaa sen uudelleen."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Voit asettaa yhteytesi uudelleen."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Olet parasta aikaa yhteydess� internettiin."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Voit joko ottaa yhteyden internettiin tai asettaa yhteyden uudelleen."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Et ole juuri nyt yhteydess� internettiin."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Ota yhteys"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Katkaise yhteys"
-
-# Asennuksen sivuvalikko
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Aseta verkkoyhteys"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internetyhteyden muodostus ja asetukset"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Asetamme seuraavaksi %s-yhteyden."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Asetamme seuraavaksi %s-yhteyden.\n"
-"\n"
-"\n"
-"Paina Ok jatkaaksesi."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Verkon asetukset"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Koska asennat k�ytt�j�rjestelm�� verkon yli, verkkon asetukset ovat jo "
-"tehty.\n"
-"Paina Ok s�ilytt��ksesi nykyiset asetukset tai peruuta asettaaksesi "
-"internet- ja verkkoasetukset uudelleen.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Tervetuloa verkon asettamisvelhoon\n"
-"\n"
-"Seuraavassa vaiheessa m��ritell��n sinun internet- / verkkoasetukset.\n"
-"Jos et halua k�ytt�� automaattista tunnistusta, poista kyseinen valinta.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Valitse uusi asetusprofiili"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "K�yt� automaattista tunnistusta"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Etsin laitteita...."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Tavallinen modeemiyhteys"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "l�ydetty portista %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN-yhteys"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "l�ydetty %s:sta"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL-yhteys"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "l�ydetty seuraavasta liit�nn�st�: %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kaapeliyhteys"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Kaapeliyhteys havaittu"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "L�hiverkko"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "seuraavat ethernet-verkkokortit l�ydetty"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Valitse yhteys, jonka haluat asettaa"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Olet asettanut useita eri tapoja ottaa yhteys internetiin.\n"
-"Valitse se, jota haluat k�ytt��.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internetyhteys"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Haluatko ottaa yhteyden koneen k�ynnistyksen yhteydess�?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Verkon asetukset"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Verkko pit�� k�ynnist�� uudelleen"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Ongelma k�ynnistett�ess� verkkoa uudelleen: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Onnittelut, verkko- ja internetyhteyksien asetus valmis.\n"
-"\n"
-"Asetukset tulevat k�ytt��n my�s itse j�rjestelm�ss�.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Kun t�m� on tehty, suosittelemme k�ynnist�m��n X-ymp�rist�n\n"
-"uudelleen v�ltt��ksesi j�rjestelm�n nimen vaihdoksesta tulevat ongelmat."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Ongelmia asettamisen aikana.\n"
-"Testaa yhteytesi net_monitor- tai mcc-ty�kalulla. Jos yhteytesi ei toimi, "
-"voit k�ynnist�� asetusty�kalun uudelleen"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"VAROITUS: T�m� laite on aikaisemmin m��ritelty internetyhteyden ottoon.\n"
-"Hyv�ksy, jos haluat pit�� laitteen asetukset sellaisina, kun ne olivat.\n"
-"Alla olevien kohtien muokkaaminen korvaa voimassa olevat asetukset."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Anna koneen IP-asetukset. Kukin kohta tulee sy�tt�� IP-osoitteena,\n"
-"pisteill� eroteltuna nelinumeroisena lukuna (esim. 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Asetan verkkolaitetta %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (ajuri %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-osoite"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Verkkopeite"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automaattinen IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-osoitteen tullee olla muotoa 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Sy�t� koneesi nimi.\n"
-"Koneesi nimen pit�isi olla t�ydellinen, kuten ``minunkone.yritys.fi''.\n"
-"Voit antaa my�s yhdysk�yt�v�n IP-osoitteen jos sinulla on sellainen."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Nimipalvelin"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Yhdysk�yt�v� (esim. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Yhdysk�yt�v�n laite"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxyjen asettaminen"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP-v�lityspalvelin:"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP-v�lityspalvelin:"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Selvit� verkkokortti-id (hy�dyllist� sylimikroille)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "V�lityspalvelimen tulee olla muotoa http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "V�lityspalvelimen tulee olla muotoa ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internetin asetukset"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Haluatko kokeilla internetyhteytt� nyt?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testaan yhteytt�si..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "J�rjestelm� on nyt internetiss�."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Turvallisuussyist� yhteys suljetaan nyt."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"J�rjestelm� ei n�yt� olevan internetiss�.\n"
-"Yrit� muuttaa internet-asetuksia."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Yhteyden asetus"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Valitse alla olevista kohdista"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kortin IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kortin muisti (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kortin IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kortin IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kortin IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Henkil�kohtainen puhelinnumerosi"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Palveluntarjoajan nimi (esim: tarjoaja.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Palveluntarjoajan puhelinnumero"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Yhteydentarjoajan dns 1 (vapaaehtoinen)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Yhteydentarjoajan�dns�2�(vapaaehtoinen)"
-
-# Asennuksen sivuvalikko
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Valitse maasi"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Soittotila"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Yhteyden nopeus"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Yhteyden aikaraja (sekunneissa)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "K�ytt�j�tunnus (k�ytt�j�n nimi)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Salasana"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "liitt�minen ep�onnistui: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Laajennettua osiotyyppi� ei ole tuettu t�ss� ymp�rist�ss�"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Sinulla on reik� osiotaulussasi eik� sit� voida k�ytt��.\n"
-"Ainoa ratkaisu on siirt�� prim��riosioita siten ett� reik� on ennen "
-"laajennettuja osioita"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Palautus tiedostosta %s ep�onnistui: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Huono varmuuskopiotiedosto"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Virhe kirjoitettaessa tiedostoon %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Jotakin kamalaa on tapahtunut kiintolevyllesi.\n"
-"Tiedon oikeellisuuden tarkistus ep�onnistui.\n"
-"Kaikki asemalle kirjoitettu tieto muuttuu tunnistamattomaksi"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "pakollinen"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "t�rke�"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "eritt�in hyv�"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "hyv�"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ehk�"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Paikallinen tulostin"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Ulkoinen tulostin"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Tulostin ulkoisella CUPS-palvelimella"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Tulostin ulkoisella lpd-palvelimella"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Verkkotulostin (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Tulostin SMB/Windows 95/98/NT -palvelimella"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Tulostin NetWare-palvelimella"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Sy�t� tulostinlaitteen osoite (URI)"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Putkita ty� k�skylle"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Tuntematon malli"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Paikalliset tulostimet"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Ulkoiset tulostimet"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " rinnakkaisliit�nn�ss� \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB tulostin \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", monik�ytt�laite rinnakkaisportissa \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", monik�ytt�laite USB:ssa"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", monitoimilaite HP JetDirectiss�"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", monitoimilaite"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", tulostetaan: %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "LPD-palvelimella \"%s\", tulostin \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP -verkkop��tteell� \"%s\", portissa %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "Windows-palvelimella \"%s\", jako \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "Novell-palvelimella \"%s\", tulostin \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", k�ytt�en komentoa %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Raakatulostin (ei ajuria)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(%s:ssa)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(t�ll� koneella)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS-palvelimella \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Oletus)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Valitse tulostinyhteys"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Miten tulostin on liitetty?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Tulostimia, jotka ovat ulkoisella CUPS-palvelimella, ei tarvitse asettaa\n"
-"t�ss�; n�m� tulostimet tunnistetaan automaattisesti."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Asetusty�kalut"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Ulkoinen CUPS-palvelin"
-
-#: ../../printerdrake.pm_.c:71
-#, fuzzy
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"CUPS-et�palvelimilla sinun ei tarvitse asettaa tulostinta t�ss�; CUPS-"
-"palvelimet kertovat niill� olevat tulostimet itse koneellesi. Kaikki t�ll� "
-"hetkell� tunnetut tulostimet on listattu \"Oletustulostin\" -kent�ss�. "
-"Valitse sielt� koneesi oletustulostin ja paina \"Toteuta/Lue uudelleen "
-"tulostimet\" -painiketta. Klikkaamalla samaa painiketta voit my�s virkist�� "
-"listan (CUPS-tulostimet ilmestyv�t 30 sekunnin sis�ll�). Kun CUPS-"
-"pelvelimesi on eri aliverkossa, sinun pit�� antaa CUPS-palvelimesi IP-osoite "
-"ja mahdollisesti my�s portin numero saadaksesi tiedot palvelimelta. Muussa "
-"tapauksessa j�t� kent�t tyhjiksi."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-osoitteen tullee olla muotoa 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Portin numeron pit�isi olla kokonaisluku!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-palvelimen IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Portti"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "CUPSin automaattinen asettaminen"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Etsin laitteita ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Kokeile portteja"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Lis�� uusi tulostin"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Paikallinen tulostin"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Etsi tulostimet"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Tulostimien automaattinen l�yt�minen"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Tee automaattinen tunnistus"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Aseta tulostin manuaalisesti"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "L�ydetty %s:sta"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Tulostin rinnakkaisportissa \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB-tulostin \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Sinun t�ytyy sy�tt�� laitteen tai tiedoston nimi!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Paikallisia tulostimia ei l�ytynyt!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Seuraava tulostin l�ydettiin, jos se ei ole se, jonka haluat asettaa, sy�t� "
-"laite- tai tiedostonimi sy�teriville"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"T�ss� on lista l�ydetyist� tulostimista. Valitse se tulostin, jonka haluat "
-"asettaa tai sy�t� laite- tai tiedostonimi sy�teriville"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Valitse portti, johon tulostimesi on kytketty tai sy�t� laitteen tai "
-"tiedoston nimi sy�teriville"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Valitse portti, johon tulostimesi on kytketty."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Rinnakkaisportit: /dev/lp0, /dev/lp1, ..., vastaavat LPT1:, LPT2:, ..., 1. "
-"USB-tulostin: /dev/usb/lp0, 2. USB-tulostin: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Sinun t�ytyy valita tai sy�tt�� tulostinlaite!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Manuaalinen asettaminen"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Asennetaan HPOJ-pakettia..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Tarkistetaan laite ja asetetaan HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Asennetaan SANE-paketteja..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skannataan HP-monik�ytt�laitteella"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Asetetaan tulostusportti CUPSin saataville..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Luetaan tulostintietokantaa ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Ulkoisen lpd-palvelimen tulostimen parametrit"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Jotta voisit k�ytt�� ulkoista lpd-tulostinta, sinun pit�isi sy�tt�� "
-"tulostuspalvelimen verkkonimi sek� tulostimen nimi kyseisell� palvelimella."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Palvelimen verkkonimi"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Ulkoisen tulostimen nimi"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Palvelimen verkkonimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Ulkoisen tulostimen nimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) -tulostimen parametrit"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"SMB-palvelimen tulostimelle tulostaaksesi sinun pit�isi sy�tt�� SMB-koneen "
-"nimi (joka ei aina ole sama kuin koneen TCP/IP nimi!) ja mahdollisesti "
-"tulostuspalvelimen IP-osoite, tulostimen jakonimi sek� soveltuva "
-"k�ytt�j�tunnus, salasana ja ty�ryhm�-tieto."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB-palvelimen nimi"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB-palvelimen IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Jakonimi"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Ty�ryhm�"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Joko palvelimen nimi tai IP-numero on annettava!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Samba-jaon nimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare-palvelimen tulostimen parametrit"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"NetWare-palvelimen tulostimelle tulostaaksesi sinun pit�isi sy�tt�� NetWare-"
-"palvelinkoneen nimi (joka ei aina ole sama kuin koneen TCP/IP nimi!) ja "
-"mahdollisesti tulostusjonon nimi sille tulostimelle, jota haluat k�ytt��, "
-"sek� soveltuva k�ytt�j�tunnus ja salasana."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Tulostuspalvelin"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Tulostusjonon nimi"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP-palvelimen nimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP-jonon nimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket -tulostimen parametrit"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Tulostaaksesi TCP- tai socket-tulostimella, sinun t�ytyy antaa tulostimen "
-"verkkonimi ja mahdollisesti portin numero. HP JetDirect-palvelimissa "
-"porttinumero on useimmiten 9100, muissa palvelimissa portti voi vaihdella. "
-"Tarkista portti laitteistosi ohjekirjasta."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Tulostinlaitteen verkkonimi"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Tulostinlaitteen verkkonimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Tulostinlaitteen osoite (URI)"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Sinun pit�� sy�tt�� laillinen URI!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Tulostimen nimi"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Kuvaus"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Paikka"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Valmistellaan tulostintietokantaa ..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Ulkoisen tulostimen nimi"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Onko t�m� oikein?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Valitse k�ytt�j�t yksitellen"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Tulostimen mallin valinta"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Mik� tulostinmalli sinulla on?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinterin asettaminen"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjetin asettaminen"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Valitsimen %s pit�� olla kokonaisluku!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Valitsimen %s pit�� olla luku!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Valitsin %s on arvoalueensa ulkopuolella!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Haluatko asettaa t�m�n tulostimen (\"%s\")\n"
-"oletustulostimeksi?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testisivut"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Ei testisivuja"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Tulosta"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standardi testisivu"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Vaihtoehtoinen testisivu (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Vaihtoehtoinen testisivu (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Valokuvatestisivu"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "�l� tulosta testisivua"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Tulostan testisivu(j)a..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testisivu(t) on l�hetetty tulostimelle.\n"
-"Voi kest�� hetken ennen kuin tulostus alkaa.\n"
-"Tulostuksen tila:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testisivu(t) on l�hetetty tulostimelle.\n"
-"Voi kest�� hetken ennen kuin tulostus alkaa.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Toimiko tulostus kunnolla?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Raakatulostin"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Saadaksesi selville nykyisen tulostimen parametrit lue joko alla oleva lista "
-"tai klikkaa \"Tulostuksen valintalista\"-painiketta.%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"T�ss� on lista nykyisen tulostinen k�yt�ss� olevista tulostusvalinnoista:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Tulostaaksesi tiedoston komentorivilt� (p��teikkunasta) k�yt� komentoa \"%s "
-"<tiedosto>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Saadaksesi listan nykyisen tulostimen parametreist� klikkaa \"Tulostuksen "
-"valintalista\"-painiketta."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Tulostaaksesi tiedoston komentorivilt� (p��teikkunasta) k�yt� komentoa \"%s "
-"<tiedosto>\". tai \"%s <tiedosto>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Sulje"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Tulostetaan/skannataan laitteella \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Tulostus k�ynniss� tulostimella \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Tulostusparametrien lista"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Luetaan tulostimen tietoja ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Siirr� tulostimen asetukset"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ja LPRng eiv�t tue IPP-tulostimia.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "�l� siirr� tulostimia"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Siirr�"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Tulostimen nimi saa sis�lt�� vain kirjaimia, numeroita ja alaviivan"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Tulostin \"%s\" on jo olemassa,\n"
-"haluatko todellakin tuhota olemassa olevat asetukset?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Uuden tulostimen nimi"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Siirr�n %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "P�ivitet��n tulostintietoja ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Ulkoisen tulostimen asetukset"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Luon verkkoyhteytt� ..."
-
-# Asennuksen sivuvalikko
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Aseta verkkoyhteys nyt"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Verkkotoimintoja ei ole asetettu"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Jatka asettamatta verkkoyhteytt�"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "K�ynnist�n tulostusj�rjestelm�� uudelleen ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "korkea"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoidi"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Asennan tulostusj�rjestelm�n turvatasolla %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "K�ynnist�� tulostusj�rjestelm�n k�ynnistyksen aikana"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Tarkistan asennetut ohjelmistot..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Poistetaan LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Poistetaan LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Valitse tulostusjono"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Mit� tulostusj�rjestelm�� (jonoa) haluat k�ytt��?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Asetetaan tulostinta \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Asennan Foomaticin ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Tulostimen asetukset"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Valmistellaan PrinterDrakea ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Asetetaan tulostinta \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Haluatko asettaa tulostuksen?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Tulostusj�rjestelm�: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"P�ivit� tulostinlistaa (n�yt� kaikki saatavilla olevat CUPS-et�tulostimet)"
-
-# Asennuksen sivuvalikko
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Aseta tulostusj�rjestelm�"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Perustila"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Haluatko asettaa toisen tulostimen?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Muokkaa tulostimen asetuksia"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Tulostin %s\n"
-"Mit� haluat muokata t�st� tulostimesta?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Tee se!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tulostusyhteyden tyyppi"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Tulostimen nimi, kuvaus, paikka"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Tulostimen valmistaja, malli, ajuri"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Tulostimen valmistaja, malli"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Aseta t�m� tulostin oletukseksi"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Tulosta testisivut"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Tied� kuinka k�ytt�� t�t� tulostinta"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Poista tulostin"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Poistetaan vanha tulostin \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Oletustulostin"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Tulostin \"%s\" on asetettu oletustulostimeksi."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Haluatko todella poistaa tulostimen \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Poistetaan tulostin \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy-asetukset"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Tervetuloa proxyn asettamisohjelmaan.\n"
-"\n"
-"T��lt� voit asettaa http- ja ftp-proxysi sis��nkirjautumisen ja\n"
-"salasanojen kanssa tai ilman niit�\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"T�yt� http-proxyn tiedot\n"
-"J�t� kohta tyhj�ksi, jos et haluat http-proxy�"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "portti"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Web-osoitteen tulee alkaa etuliitteell� 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Porttiosan pit�isi olla numeerinen"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"T�yt� ftp-proxyn tiedot\n"
-"J�t� kohta tyhj�ksi, jos et haluat ftp-proxy�"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Web-osoitteen tulee alkaa etuliitteell� 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Sy�t� proxyn k�ytt�j�tunnus ja salasana, jos sellaiset on.\n"
-"J�t� kohdat tyhjiksi, jos et halua k�ytt�� tunnus/salasana-yhdistelm��"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "k�ytt�j�tunnus"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "salasana"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "salasana uudelleen"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Salasanat poikkeavat toisistaan. Kokeile uudelleen!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "En voi lis�t� osiota _alustetulle_ RAID:lle md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "En voi kirjoittaa tiedostoa %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ep�onnistui"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ep�onnistui (ehk� raid-ty�kalut puuttuvat?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ei riitt�v�sti osioita RAID tasolle %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "K�ynnist� ALSA (Advanced Linux Sound Architecture) ��nij�rjestelm�"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron on jaksottainen komentojen ajastaja."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd:ta k�ytet��n valvomaan paristojen tilaa ja raportoimaan siit� syslogin\n"
-"kautta. apmd:t� voidaan my�s k�ytt�� sulkemaan kone patterien ollessa tyhji�."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ajaa komentoja m��r�tyill� ajanhetkill�, jotka on m��ritelty at-komennolla.\n"
-"Ajaa my�s er�ajoja, kun j�rjestelm�n kuormitus on riitt�v�n matala."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron on UNIX:n perusohjelma joka ajaa m��riteltyj� ohjelmia m��r�tyill�\n"
-"ajanhetkill�. vixie cron lis�� monia omianisuuksia verrattuna normaaliin\n"
-"UNIX:n cron ohjelmaan, kuten paremman turvallisuuden ja laajemmat asetukset."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM lis�� hiirituen tekstipohjaisiin Linux-sovelluksiin kuten Midnight\n"
-"Commander. GPM mahdollistaa my�s leikkaa/liimaa toiminnot hiirell�,\n"
-"ja sis�lt�� tuen valikoille konsolissa."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake etsii uutta laitteistoa ja mahdollisesti konfiguroi\n"
-"uuden/muuttuneen laitteiston."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache on WWW-palvelin. Palvelinta k�ytet��n jakamaan HTML-\n"
-"tiedostoja ja ajamaan CGI-ohjelmia."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet p��palvelin (yleens� inetd) k�ynnist�� useita eri\n"
-"internet palveluita tarpeen mukaan. Palvelin k�ynnist�� useita\n"
-"palveluita, kuten telnet, ftp, rsh ja rlogin. inetd:n poistaminen\n"
-"poistaa my�s n�m� palvelut k�yt�st�."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"K�ynnist� pakettifiltteri Linux 2.2-sarjalle, jos haluat\n"
-"pystytt�� palomuurin suojaamaan konettasi verkkohy�kk�yksilt�."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Paketti lataa valitun n�pp�inkartan /etc/sysconfig/keyboard\n"
-"tiedoston asetusten mukaisesti.  Asetukset voidaan valita kbdconfig "
-"ty�kalulla.\n"
-"T�m� tulisi ottaa k�ytt��n l�hes kaikissa j�rjestelmiss�."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automaattinen ytimen otsikkotiedoston korjaus /boot-hakemistossa "
-"tiedostolle\n"
-"/usr/include/linux/{autoconf,versio}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Automaattinen uuden laitteiston havaitseminen ja asettaminen "
-"k�ynnistett�ess�."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf j�rjest�� joskus aikaa erilaisten teht�vien hoitamiseen\n"
-"k�ynnistyksen aikana pit��kseen yll� j�rjestelm�n asetuksia."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd on tulostuspalvelin, jonka lpr ohjelma vaatii toimiakseen.\n"
-"lpd on palvelin joka jakaa tulostust�it� kirjoittimille."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, jonka avulla voidaan rakentaa suuritehoinen\n"
-"korkean k�ytett�vyyden palvelin."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) on nimipalvelin (DNS) jota k�ytet��n muunnettaessa koneiden "
-"verkkonimi� IP-osoitteiksi."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Liitt�� ja irroittaa NFS (Network File System), SMB (Lan\n"
-"Manager/Windows) ja NCP (NetWare) liitospaikat."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivoi/Poistaa kaikki verkkoliittym�t jotka on asetettu\n"
-"k�ynnistyksess�."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS on yleinen protokolla tiedostojen jakoon TCP/IP-\n"
-"verkoissa. T�m� palvelu mahdollistaa NFS-palvelimen\n"
-"k�ynnistyksen, jakoa ohjataan tiedostosta /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS on yleinen protokolla tiedostojen jakoon TCP/IP-\n"
-"verkoissa. T�m� palvelu mahdollistaa NSF-tiedostolukot."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Asettaa k�ynnistyksess� numlock-n�pp�inlukitsimen p��lle\n"
-"sek� konsolille ett� XFree:lle."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Tuki OKI 4w -yhteensopiville Windows-tulostimille."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMIA tukea k�ytet��n yleens� kannettavissa ethernet- ja modeemi-\n"
-"korttien tukemiseen. Palvelu ei k�ynnisty ellei sit� ole asetettu, joten\n"
-"sen voi asentaa my�s koneisiin jotka eiv�t sit� tarvitse."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper hallitsee RPC-yhteyksi�, joita k�ytt�v�t esimerkiksi\n"
-"NFS ja NIS-protokollat. portmap-palvelin on oltava k�ynniss�\n"
-"j�rjestelmiss� jotka haluavat tarjota n�it� protokollia."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix on s�hk�postin siirtoagentti, eli ohjelma joka v�litt�� postia "
-"koneelta toiselle."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Tallentaa ja palauttaa j�rjestelm�n satunnaislukualtaan, t�m� parantaa\n"
-"satunnaislukujen laatua."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"M��r�� raakalaitteet blokkilaitteiksi (kuten kiintolevyn\n"
-"osiot) tietyn tyyppisten sovellusten (esim. Oracle) k�ytt��n"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed-palvelin mahdollistaa automaattiset IP-reititystaulun p�ivitykset\n"
-"RIP-protokollalla. Vaikka RIP-protokolla on paljon k�ytetty pieniss� "
-"verkoissa,\n"
-"monimutkaisemmat verkot vaativat parempia reititysprotokollia."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstart-protokolla mahdollistaa verkkok�ytt�jille\n"
-"eri koneiden tilatietojen haun."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers-protokolla verkon k�ytt�jille mahdollisuuden tunnistaa, ketk�\n"
-"ovat sis�ll� eri koneissa."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho-protokollalla et�k�ytt�j�t voivat listata kaikki koneella\n"
-"olevat k�ytt�j�t (vastaa fingeri�)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "K�ynnist� ��nij�rjestelm� tietokoneessasi"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog on tapa jolla monet palvelimet kirjottavat viestins� talteen\n"
-"useisiin lokitiedostoihin.  On j�rkev�� k�ytt�� syslog-ohjelmaa."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Lataa usb-laitteiden ajurit."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "K�ynnist�� X-kirjasinpalvelimen (pakollinen, jos haluat ajaa XFree:t�)"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Valitse mitk� palvelut k�ynnistet��n automaattisesti"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Tulostus"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Tiedostojen jako"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "J�rjestelm�"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Et�hallinta"
-
-# ../../share/compssUsers
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Tietokantapalvelin"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Palvelut: %d activoitu %d:st� rekister�idyst�"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Palvelut"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "k�ynniss�"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "pys�htynyt"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Palvelut ja demonit"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Ei lis�tietoja\n"
-"t�lle palvelulle."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "K�ynnistyksen yhteydess�"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "K�ynnist�"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Sammuta"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Liity vapaan ohjelmiston maailmaan"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet ja viestint�"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedia - Grafiikka"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Kehitysymp�rist�"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandraken hallintapaneeli"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "K�ytt�liittym�t"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Palvelinohjelmisto"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Pelit"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Asennan paketteja..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Osiotaulua ei voida lukea, siin� on liikaa virheit� :(\n"
-"Taulu yritet��n korjata nollaamalla se"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Virhe!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Tarvittavaa esitystiedostoa `%s' ei l�ytynyt."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Asenna asennusohjelma automaattisesti"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Automaattisten vaiheiden asetus"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"V�litse jokaiselle vaiheelle toistetaanko asennus samalla tapaa kuin nyt vai "
-"onko kyseinen vaihe manuaalinen"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Tervetuloa.\n"
-"\n"
-"Automaattisen asennuksen parametrit l�ytyv�t vasemmalla olevista lohkoista"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Onnittelut!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Levykkeen luominen onnistui.\n"
-"Voit nyt toistaa asennuksesi."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Automaattinen asennus"
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Lis�� alkio"
-
-# mat
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Poista viimeinen alkio"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup-raportti \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Daemonin raportti\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup-raportin yksityiskohdat\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "kokonaisedistyminen"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Varmuuskopioi j�rjestelm�tiedostot..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Kiintolevyn varmuuskopiotiedostot..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Varmuuskopioi k�ytt�j�tiedostot..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Kiintolevyn varmuuskopion edistyminen..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Varmuuskopioi muut tiedostot..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"tiedostolistan l�hetti FTP : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP-yhteysongelma: varmuuskopion l�hett�minen FTPn kautta ep�onnistui.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Virhe l�hetett�ess� s�hk�postia. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Tiedostojen valinta"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Valitse tiedostot tai hakemistot ja klikkaa 'Lis��'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Valitse kaikki asetukset, jotka tarvitset.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Naill� asetuksilla voit varmuuskopioida ja palauttaa kaikki tiedostot /etc-"
-"hakemistosta.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Varmuuskopioi systeemitiedostot ( /etc-hakemisto )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "K�yt� kasvavaa varmuuskopiointia (�l� korvaa vanhoja varmuuskopioita)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "�l� sis�llyt� kriittisi� tiedostoja (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"T�ll� valitsimella voit palauttaa mink� tahansa version\n"
-"/etc-hakemistostasi."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Valitse kaikki ne k�ytt�j�t, jotka haluat sis�llytt�� varmuuskopioosi."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "�l� sis�llyt� selaimen v�limuistia"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "K�yt� kasvavia varmuuskopitoita  (�l� korvaa vanhoja varmuuskopioita)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Poista valitut"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "K�ytt�j�t"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "K�yt� FTP-yhteytt� varmuuskopiointiin"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Sy�t� verkkoaseman nimi tai IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Sy�t� hakemisto, johon t�m�n\n"
-"koneen varmuuskopio laitetaan."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Sy�t� k�ytt�j�tunnuksesi"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Sy�t� salasanasi"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Muista t�m� salasana"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP-yhteys"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Salattu yhteys"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "K�yt� CD/DVD-ROM -levy� varmuuskopioille"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Valitse k�ytett�v� CD:n koko"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Valitse, jos k�yt�t CD-RW-mediaa"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Valitse, jos haluat tyhjent�� CD-RW:n ennen kopiointia"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Valitse, jos haluat tehd� CD-levyst�si\n"
-"k�ynnistett�v�n."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Sy�t� kirjoittavan CD-asemasi laitenimi\n"
-"esim: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "K�yt� nauhaa varmuuskopioinnissa"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Sy�t� varmuuskopioinnissa k�ytett�v�n laitteen nimi"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Sy�t� suurin sallittu koko\n"
-"Drakbackup-varmuuskopiolle"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Sy�t� hakemisto, johon tallennetaan:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "K�yt� quotaa varmuuskopiotiedostoille."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Verkko"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CD-ROM / DVD-ROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Kiintolevy / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "tunneittain"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "p�ivitt�in"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "viikoittain"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "kuukausittain"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "K�yt� daemonia"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Valitse per�kk�isten\n"
-"varmuuskopioiden aikav�li"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Valitse varmuuskopiointiin\n"
-"k�ytett�v� media."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "K�yt� kiintolevy� daemonilla"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "K�yt� FTPt� daemonilla"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Varmista ett� cron-daemon on mukana k�yt�ss� olevissa palveluissa."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "L�het� raportti jokaisesta varmuuskopiosta s�hk�postitse :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Mit�"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Miss�"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Koska"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Lis�valinnat"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup-asetukset"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Valitse, mihin haluat tehd� varmuuskopiot"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "kiintolevylle"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "verkon yli"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Valitse mit� haluat varmuuskopioida"
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Varmuuskopioi j�rjestelm�"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Varmuuskopioi k�ytt�j�t"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Valitse k�ytt�j�t yksitellen"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Varmuuskopion l�hteet: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- J�rjestelm�tiedostot:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- K�ytt�j�tiedostot:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Muut tiedostot:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Tallenna kiintolevylle polulle : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Tallenna FTP:ll� verkkoasemalle : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t k�ytt�j�tunnus: %s\n"
-"\t\t polulla: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Valitsimet:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\t�l� sis�llyt� j�rjestelm�tiedostoja\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tVarmuuskopiot k�ytt�v�t: tar ja bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tVarmuuskopiot k�ytt�v�t: tar ja gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Daemon (%s) sis�lt�� :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Kiintolevy.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CD-ROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Verkkoon k�ytt�en FTP:t�.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Verkkoon k�ytt�en SSH:ta.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ei asetettu, valitse Velho tai Edistynyt.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lista palautettavista tiedoista:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lista vahingoittuneista tiedoista:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Poista valinta tai poista se seuraavalla kerralla."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Varmuuskopiot ovat vahingoittuneet"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Kaikki valitsemasi tieto on          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          onnistuneesti palautettu paikkaan %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Palauta asetukset       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Ok palauttaakseen muut tiedostot."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Palautettava k�ytt�j�lista (vain uusin p�iv� kutakin k�ytt�j�� kohti on "
-"t�rke�)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Tee j�rjestelm�tiedostoista varmuuskopio ennen:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Valitse p�iv�m��r�, johon tiedon palauttaminen tehd��n"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "K�yt� kiintolevy� varmuuskopiointiin"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Palauta kiintolevylt�."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Anna hakemisto, johon varmuuskopiot on tallennettu"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Valitse toinen media, josta palauttaa"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Muu media"
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Palauta j�rjestelm�"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Palauta k�ytt�j�t"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Palauta muut"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "valitse polku, josta palautat (juurihakemiston sijaan)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Tee uusi varmuuskopio ennen palauttamista (vain kasvavilla varmuuskopioilla)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Poista k�ytt�jien hakemistot ennen palauttamista."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Palauta kaikki varmuuskopiot"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Mukautettu palautus"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Apua"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Edellinen"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Tallenna"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Tee varmuuskopio"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Palauta"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Seuraava"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Tee varmuuskopio ennen kuin yrit�t palauttaa sen...\n"
-"tai tarkista ett� tallennuspolku on oikea."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Virhe sendmailin aikana\n"
-"  raporttipostiasi ei l�hetetty\n"
-"  Konfiguroi sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lista asennettavista paketeista"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Virhe FTP-siirron aikana.\n"
-" Korjaa FTP-asetuksesi."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Valitse palautettava tieto..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Valitse varmuuskopioinnissa k�ytett�v� media..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Valitse varmuuskopioitava tieto..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Asetustiedostoa ei l�ytynyt\n"
-"valitse joko Velho tai Kehittynyt."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Kehityksen alla ... odota."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Varmuuskopioi j�rjestelm�tiedostot"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Varmuuskopioi k�ytt�j�tiedostot"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Varmuuskopioi muut tiedostot"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Kokonaisedistyminen"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "tiedostoja l�hetet��n FTP:n yli"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "L�het�n tiedostoja..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Tietolista sis�llytett�v�ksi CD-ROMiin"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Valitse kirjoittavan CD-aseman nopeus"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Valitse kirjoittavan CD-aseman laitenimi (esim. 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Valitse, jos haluat tehd� k�ynnistett�v�n CD:n."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Tee heti asetustiedoston varmuuskopio"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "N�yt� varmuuskopioinnin asetukset."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr ""
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Varmuuskopioi heti"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft. Tekij�: DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s:n asennus ep�onnistu. Seuraava virhe tapahtui:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Etsi asennetut kirjasimet"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Poista asetettujen kirjasimien valinta"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "j�senn� kaikki kirjasimet"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "kirjasimia ei l�ytynyt"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "valmis"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "liitetyilt� osioilta ei l�ytynyt ainoatakaan kirjasinta"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Valitse uudelleen oikeat kirjasimet"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "kirjasimia ei l�ytynyt.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Etsi kirjasimia asennettujen listalta"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kirjasimet kopioi"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "True Type kirjasimien asennus"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "odota kunnes ttmkfdir on valmis..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "True Type -asennus valmis"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Kirjasinten muuntaminen"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "rakennetaan: type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf kirjasinten muunnos"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm kirjasinten muunnos"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Poista v�liaikaistiedostot"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "K�ynnist� XFS uudelleen"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Poista kirjasintiedostot"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs:n uudelleenk�ynnistys"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Ennen kuin asennat uusia kirjasimia, varmista ett� sinulla on oikeudet "
-"k�ytt�� ja asentaa ne j�rjestelm��si.\n"
-"\n"
-"- Voit asentaa kirjasimet perinteisell� tavalla. Harvoissa tapauksissa bogus-"
-"kirjasimet voivat lukit� X-palvelimen."
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Kirjasinten tuonti"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Hae Windowsin kirjasimet"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Poista kirjasimet levylt�"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Lis�valinnat"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Kirjasinlista"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Valitse sovellukset, jotka tukevat kirjasimia :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Yleiset tulostimet"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Valitse kirjasintiedosto tai hakemisto ja klikkaa 'Lis��'"
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Asenna lista"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "paina t�h�n, kun olet varma."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "t�h�n jos et ole."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Poista valinta kaikista"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Valitse kaikki"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Poista lista"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Alkutestit"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopioi kirjasimet j�rjestelm��si"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Asenna & muunna kirjasimia"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Asennuksen j�lkeiset toiminnot"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Poista j�rjestelm�ss�si olevia kirjasimia"
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Poistamisen j�lkeiset toiminnot"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Internetyhteyden jakaminen"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetyhteyden jakaminen on k�yt�ss�"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetyhteyden jakaminen on jo asetettu.\n"
-"Sen nykyinen tila on: k�yt�ss�.\n"
-"\n"
-"Mit� haluat tehd�?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "poista k�yt�st�"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "lopeta"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "aseta uudelleen"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Poistan palvelut k�yt�st�..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetyhteyden jakaminen ei ole en�� k�yt�ss�."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetyhteyden jakaminen ei ole k�yt�ss�"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetyhteyden jakaminen on jo asetettu.\n"
-"Sen nykyinen tila on .ei k�yt�ss�\n"
-"\n"
-"Mit� haluat tehd�?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "ota k�ytt��n"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Otan palvelut k�ytt��n.."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetyhteyden jakaminen on nyt k�yt�ss�."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Olet aikeissa asettaa tietokoneesi jakamaan internetyhteyden muiden koneiden "
-"kanssa.\n"
-"T�ll� ominaisuudella muut paikallisverkossa olevat tietokoneet voivat "
-"k�ytt�� t�m�n tietokoneen internetyhteytt�.\n"
-"\n"
-"Huomaa: tarvitset erityisen verkkokortin pystytt��ksesi oman paikallisverkon."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Liittym� %s (k�ytt�en moduulia %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Liittym� %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Koneessasi ei ole verkkokorttia!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Koneestasi ei l�ytynyt yht��n verkkokorttia. Aja laitteistonhakuty�kalu."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Verkkoliittym�"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Tietokoneessasi on vain yksi verkkokortti:\n"
-"\n"
-"%s\n"
-"\n"
-"Valmistaudun asettamaan l�hiverkkosi asetukset kyseiselle laitteelle."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Valitse verkkokortti, joka on kytketty paikallisverkkoon."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Verkkoliit�nt� on jo asetettu"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Varoitus, verkkokortti (%s) on jo asetettu.\n"
-"\n"
-"Haluatko automaattisen uudelleenasetuksen?\n"
-"\n"
-"Voit asettaa sen my�s manuaalisesti, mutta silloin sinun pit�� tiet��, mit� "
-"olet tekem�ss�."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automaattinen uudelleenasetus"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "N�yt� nykyiset liit�nt�asetukset"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Koneen `%s' nykyiset asetukset:\n"
-"\n"
-"Verkko: %s\n"
-"IP-osoite: %s\n"
-"IP-m��reet: %s\n"
-"Ajuri: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Voin s�ilytt�� nykyiset asetuksesi ja olettaa, ett� olet jo pystytt�nyt DHCP-"
-"palvelimen. Siin� tapauksessa varmista ett� luen oikein C-luokan verkon, "
-"jota k�yt�t paikallisverkkonasi, sill� en muuta sen asetuksia tai koske DHCP-"
-"palvelimesi asetuksiin.\n"
-"\n"
-"Muussa tapauksessa voin asettaa liit�nt�si ja asettaa (uudelleen) DHCP-"
-"palvelimen puolestasi.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C-luokan paikallisverkko"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "(T�m�n) DHCP-palvelimen IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Aseta liitynt�rajapinta ja DHCP-palvelin uudelleen"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Paikallisverkko ei loppunut '.0':aan, t�ydennet��n."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Mahdollinen l�hiverkon osoitet�rm�ys l�ydetty nykyisill� asetuksilla %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Palomuuri l�ydetty!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Varoitus! Olemassaoleva palomuuri l�ydetty. Tarvitset mahdollisesti k�sin "
-"teht�vi�korjauksia asennuksen j�lkeen."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "M��rittelen..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"M��rittelen komentotiedostot, asennan ohjelmistot, k�ynnist�n palvelimet..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Asennan pakettia %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Kaikki asetettu.\n"
-"Voit nyt jakaa internetyhteyden muiden l�hiverkon koneiden kanssak�ytt�m�ll� "
-"automaattista l�hiverkon m��rittely� (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Asetukset on jo tehty, mutta ne ovat t�ll� hetkell� poistettu k�yt�st�."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Asetukset on jo tehty ja ne ovat k�yt�ss�."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internetyhteyden jakamista ei ole koskaan asetettu."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Internetyhteyden jakamisen asetukset"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Tervetuloa internetyhteyden jakamisen apuohjelmaan!\n"
-"\n"
-"%s\n"
-"\n"
-"Paina Aseta k�ynnist��ksesi asennusohjelman."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Verkon asetukset (%d-laitteille)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profiili: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Poista profiili..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Valitse poistettava profiili:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Uusi profiili..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Luotavan profiilin nimi (uusi profiili luodaan kopioimalla nykyisen tiedot) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Koneen nimi:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internetyhteys"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tyyppi:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Yhdysk�yt�v�:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Liit�nt�:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Tila:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Odota hetki"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "M��rittele internetyhteys..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "L�hiverkon asetukset"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Ajurit"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Liit�nt�"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokolla"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Tila"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Aseta paikallisverkko..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Paina t�h�n k�ynnist��ksesi asennusohjelman ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Velho..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Toteuta"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Odota hetki... Otetaan asetukset k�ytt��n"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Yhteys muodostettu"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Ei yhteytt�"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Yhdist�..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Katkaise yhteys..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Varoitus, toinen internet-yhteys on havaittu, mahdollisesti k�ytt�en sinun "
-"vekkoasi"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Sinulla ei ole ainoatakaan asetettua liitynt��.\n"
-"Aseta ne ensin klikkaamalla 'Aseta'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "L�hiverkon asetukset"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Laite %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "K�ynnistysprotokolla"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "K�ynnistetty koneen k�ynnist�misen yhteydess�"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP-asiakas"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktivoi nyt"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktivoi nyt"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"T�t� liitynt�rajapintaa ei ole viel� asetettu.\n"
-"K�ynnist� p��ikkunasta l�ytyv� asetusvelho"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Sinulla ei ole ainoatakaan internet-yhteytt�.\n"
-"Luo sellainen ensin klikkaamalla 'Aseta'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internetyhteyden asetus"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internetyhteyden asetus"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Yhteyden nimi: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametrit"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Yhdysk�yt�v�"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Verkkokortti"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-asiakas"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Asetan turvatasoa"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrollipaneeli"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Valitse haluamasi ty�kalu"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kaapeli)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "Yhdysvallat (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "Yhdysvallat (kaapeli)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "Yhdysvallat (hrc-kaapeli)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Kiina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japani (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japani (kaapeli)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "It�-Eurooppa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlanti"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "L�nsi-Eurooppa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Uusi-Seelanti"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Etel�-Afrikka"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentiina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Ole hyv�,\n"
-"kirjoita k�ytt�m�si tv-normi sek� asuinmaa"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV-normi :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Alue :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "TV-kanavien haku k�ynniss� ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Haetaan TV-kanavia"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "k�ytt�: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Valitse n�pp�imist�si asettelu."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Haluatko BackSpace-n�pp�imen toimivan kuten Delete konsolissa?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Vaihda CD-levy�"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Aseta asennuslevy CD-asemaan ja paina Ok.\n"
-"Jos sinulla ei ole levy�, paina Peruuta est��ksesi j�rjestelm�n p�ivityksen."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "J�rjestelm�n p�ivityst� ei voida aloittaa!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "N�yt� vain valittu p�iv�"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Tiedosto/_Uusi"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>U"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Tiedosto/_Avaa"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Tiedosto/_Tallenna"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>T"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/File/Tallenna _Nimell�"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Tiedosto/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Valinnat"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Valinnat/Testi"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Ohje"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Ohje/_Tietoja..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "K�ytt�j�"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Viestit"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "J�rjestelm�loki"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Mandraken ty�k�lujen selitykset"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "etsi"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Ty�kalu lokien seuraamiseen"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Asetukset"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "t�sm��"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "mutta ei t�sm��"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Valitse tiedosto"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalenteri"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Tiedoston sis�lt�"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Posti- ja SMS-h�lytys"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "odota hetki, j�senn�n tiedostoa : %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Posti- ja SMS-h�lytyksen asetukset"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Tervetuloa s�hk�postin ja SMS-viestien asettamisohjelmaan.\n"
-"\n"
-"T��ll� voit pystytt�� h�lyytysj�rjestelm�n.\n"
-
-# ../../share/compssUsers
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "Palveluiden asettaminen"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Saat h�lytyksen kun jokin valituista palveluista ei ole en�� k�ynniss�"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "lataa asetukset"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Saat h�lytyksen jos kuorma on t�t� arvoa suurempi"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "h�lytyksen asetukset"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Aseta tapa, jolla j�rjestelm� h�lytt�� sinulle"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Tallenna nimell�.."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Valitse hiiren tyyppi."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_usb:ta ei l�ytynyt\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emuloi kolmatta n�pp�int�?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s l�ytyi paikasta %s, aseta se ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Valitse skanneri"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "T�t� %s skanneria ei ole tuettu"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "K�ynnistyslaite"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Palomuurin asetukset"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Palomuurin asetukset"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Palomuurin asettaminen\n"
-"\n"
-"Olet jo m��ritellyt palomuurin. Paina \"M��rittele\" \n"
-"poistaaksesi palomuurin tai muuttaaksesi sen asetuksia"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Palomuurin asettaminen\n"
-"\n"
-"Paina \"M��rittele\" pystyytt��ksesi palomuurin"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Kieliasetukset"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Asennuksen luokka"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Kiintolevyjen tunnistus"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Hiiren m��rittely"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "N�pp�imist�n valinta"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Tietoturva"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Tiedostoj�rjestelm�t"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Levyjen osiointi"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Asennettavat paketit"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Asenna j�rjestelm�"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "K�ytt�jien lis��minen"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Verkkoasetukset"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Palvelujen asettaminen"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Lataajan asetus"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "K�ynnistyslevyke"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Asenna X"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Asenna p�ivitykset"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Lopeta asennus"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewallin asettaminen\n"
-"\n"
-"T�m� vaihe asettaa henkil�kohtaisen palomuurin Mandrake Linux\n"
-"-j�rjestelm��si. Mik�li haluat tehokkaan palomuuriratkaisun, hae\n"
-"lis�tietoja MandrakeSecurity Firewall distribuutiosta."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"T�ss� vaiheessa kysyt��n mit� palveluita haluat haluat sallia muille\n"
-"internetin k�ytt�jille siksi aikaa kun tietokoneesi on internetiss�. \n"
-"Harkitse huolellisesti, ennen kuin vastaat n�ihin kysymyksiin,\n"
-"sill� n�m� vaikuttavat tietokoneesi tietoturvaan.\n"
-"\n"
-"Jos et k�yt� t�ll� hetkell� ainoatakaan seuraavista palveluista,\n"
-"suojaa tietokoneesi palomuurilla. Voit muuttaa n�it� asetuksia milloin \n"
-"haluat vain k�ynnist�m�ll� t�m�n ohjelman uudelleen."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Onko tietokoneessasi webbisivuja, joiden haluat n�kyv�n kaikkialle\n"
-"internettiin? Jos ajat webbipalvelinta, jonka tarvitsee n�ky� v�in\n"
-"omalle tietokoneellesi, voit turvallisesti vastata EI t�h�n kysymykseen.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Haluatko koneesi toimivan nimipalvelimena? Jos et halua pystytt�� \n"
-"nimipalvelinta  jakamaan IP- ja vy�hyketietoja internettiin, vastaa ei.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Haluatko sallia koneellesi tulevat Secure Shell (ssh) -yhteydet? T�m�\n"
-"on telnetin korvaava palvelu, jota voit k�ytt�� kirjoittautuaksesi sis��n\n"
-"internetin kautta. Jos k�yt�t viel� telneti�, sinun pit�isi vaihtaa se \n"
-"ssh:iin. Telnet-yhteydet eiv�t ole suojattuja -- hy�kk��j� voi varastaa\n"
-"salasanasi, jos k�yt�t sit�. Ssh-yhteys on sit�vastoin suojattu, joten\n"
-"kukaan ei pysty salakuuntelemaan sit�."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Haluatko sallia sis��n tulevat telnet-yhteydet?\n"
-"T�m� on hirvitt�v�n vaarallista, kuten edellinen kohta osoitti.\n"
-"Suosittelemme ett� vastaisit Ei t�h�n kohtaan ja k�ytt�isit\n"
-"telnetin sijaan ssh:ta.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Ajatko tietokoneellasi FTP-palvelinta, jonka haluat n�kyv�n my�s\n"
-"internettiin? Jos vastasit kyll�, suosittelemme, ett� k�ytt�isit sit�\n"
-"vain anonyymeihin siirtoihin. Mik� tahansa salasana voidaan varastaa,\n"
-"mik�li se siirret��n FTP-protokollan kautta, sill� FTP ei suojaa\n"
-"siirrett�vi� salasanoja.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Toimiiko tietokoneesi postipalvelimena? Jos l�het�t s�hk�postiviestisi\n"
-"pinen, muttin tai mink� tahansa tekstipohjaisen postinlukuohjelmiston\n"
-"avulla, se on todenn�k�ist�. Muussa tapauksessa sinun pit�isi suojata\n"
-"ominaisuus pois palomuurin avulla.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Ajatko POP- tai IMAP-palvelinta koneellasi? N�it� palvelimia\n"
-"k�ytet��n yll�pit�m��n ei-webbipohjaisia s�hk�postitunnuksia\n"
-"ihmisille, jotka haluavat hakea postinsa t�lt� koneelta omillensa.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"K�yt�t 2.2-sarjan Linuxin ydint�. Jos internetosoite (IP),\n"
-"jota tietokoneesi k�ytt��, asetetaan automaattisesti\n"
-"toisesta kotonasi tai ty�paikallasi olevasta tietokoneesta\n"
-"(eli se on dynaamisesti m��r�tty), ominaisuuden k�ytt� \n"
-"pit�� sallia. Pit��k� paikkaansa?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Onko tietokoneesi kello synkronoitu toisen tietokoneen kanssa?\n"
-"Useimmiten t�t� ominaisuutta k�ytet��n keskisuurissa Unix/Linux\n"
-"-organisaatioissa esimerkiksi lokin synkronointiin. Jos tietokoneesi\n"
-"ei ole osa suurempaa toimistoa tai et ole kuullut t�llaisesta, \n"
-"j�rjestelm� ei luultavasti ole synkronoitu."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Asetukset tehty. Kirjoitetaanko muutokset levylle?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "En voi avata %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Tiedostoa %s ei voi avata kirjoittamista varten: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Palomuurin asetukset"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Valmistelen asennusta"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Verkkop��te (asiakas)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-, SMB-, SSH- ja v�lipalvelin"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Toimistosovellukset"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome-ty�asema"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Ty�kalut Palm Pilotin tai Visorin liitt�miseksi"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Ty�asema"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Palomuuri / Reititys"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Nimipalvelin ja tietoverkon informaatiopalvelin"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Office-ohjelmistot: tekstink�sittely (kword, abiword), taulukkolaskenta "
-"(kspread,gnumeric), pdf-lukijat jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "��nenk�sittely: mp3, midi, mikserit, jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Kirjoja ja ohjeita Linuxista sek� vapaan l�hdekoodin ohjelmista"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE-ty�asema"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, jne"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Kokoelma ty�kaluja s�hk�postiin, nyytisiin, webiin, tiedostonsiirtoon ja "
-"jutusteluun"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Tietokanta"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL tai MySQL tietokantapalvelin"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Ty�kalut, jotka helpottavat tietokoneesi asetusten muokkaamista"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - ��ni"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Apuohjelmat"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentaatio"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Komentorivity�kalut"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix-postipalvelin, Inn-nyytispalvelin"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet-asema"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedia-asema"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Asetusty�kalut"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Lis�� graafisia ty�p�yti� (Gnome, IceWM)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K-ty�p�yt�ymp�rist�. Graafinen perusymp�rist� ja sen mukana tulevat ty�kalut"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Graafinen ymp�rist�"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache WWW-palvelin ja Pro-ftpd FTP-palvelin"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Ty�kalut CD:iden luomiseen ja polttamiseen"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Toimistoty�asema"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Palvelin"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiikkaohjelmistot, kuten Gimp"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C ja C++ ohjelmointity�kalut, kirjastot ja include-tiedostot"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Verkkotietokone (palvelin)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "S�hk�posti/Groupware/Nyytiset"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Pelikone"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videon katselu ja editointi"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafiikka"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Pelit: tasohyppely, korttipelit, strategia, jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Valikoima ty�kaluja s�hk�postin ja nyytisten lukemiseen (pine, mutt, tin...) "
-"sek� internetiss� surffailuun"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Varmuuskopiointi, emulaattorit, j�rjestelm�n tarkkailu"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Henkil�kohtainen kirjanpito"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Graafinen ymp�rist� k�ytt�j�yst�v�llisell� ohjelmistolla ja ty�kaluilla."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Asiakasohjelmat eri protokollille (ssh jne)"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetyhdysk�yt�v�"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "��nen sek� videon soitto- ja editointiohjelmat"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Muut graafiset k�ytt�ymp�rist�t"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editorit, komentotulkit, tiedostoty�kalut, terminaalit"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Tilinpito-ohjelmia, kuten gnucash"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Henkil�kohteisen tiedon hallinta"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD:n poltto"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Tieteelliinen ty�asema"
-
-#~ msgid "About"
-#~ msgstr "Tietoja"
-
-#~ msgid "             Help           "
-#~ msgstr "             Apua           "
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr "Ei saantia k�yt�ss� olevan ytimen moduuleihin (tiedosto %s puuttuu)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Ei asetettu"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Valitse oletustulostin !"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Toteuta/Lue uudelleen tulostimet"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Voit antaa lis�asetuksia modulille %s."
-
-#~ msgid "Low"
-#~ msgstr "Matala"
-
-#~ msgid "Medium"
-#~ msgstr "Keskitaso"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Muutamia parannuksia t�ll� turvaasolla, suurimpana se ett� "
-#~ "j�rjestelm�ss�\n"
-#~ "on enemm�n turvallisuusvaroituksia ja tarkistuksia."
-
-#~ msgid "mount failed"
-#~ msgstr "liitt�minen ep�onnistui"
-
-#~ msgid "Boot mode"
-#~ msgstr "K�ynnistila"
-
-#~ msgid "Export"
-#~ msgstr "Vie"
-
-#~ msgid "click here"
-#~ msgstr "klikkaa t�h�n"
diff --git a/perl-install/share/po/fr.po b/perl-install/share/po/fr.po
deleted file mode 100644
index abfe2a8c9..000000000
--- a/perl-install/share/po/fr.po
+++ /dev/null
@@ -1,12589 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# David BAUDENS <baudens@mandrakesoft.com>, 1999-2002
-# David ODIN <odin@mandrakesoft.com>, 2000
-# Pablo Saratxaga <pablo@mandrakesoft.com>, 2001
-# KAtiOS <katios@nolabel.net>, 2001
-# Guillaume Cottenceau <gc@mandrakesoft.com>, 2001-2002
-# Thierry Vignaud <tvignaud@mandrakesoft.com>, 2001-2002
-# Combelles Christophe <ccomb@club-internet.fr>, 2002
-#
-# Veuillez ne pas mettre � jour ce fichier � moins d'�tre
-# certain tant de vos traductions que de votre grammaire et
-# de votre orthographe. Ces derni�res sont trop souvent
-# approximatives. Elles n�cessitent alors des relectures et
-# des corrections qui n'ont d'autre cons�quence que de faire
-# perdre du temps � tout le monde (� vous si votre travail est
-# imparfait et aux relecteurs qui doivent rechercher puis corriger
-# vos �ventuelles fautes).
-#
-# VEUILLEZ RESPECTER LA TYPOGRAPHIE FRAN�AISE�!
-# Les majuscules doivent �tre accentu�es si besoin est. Respectez
-# les espaces n�cessaires pour la ponctuation (espace apr�s la virgule et
-# le point, espace ins�cables avant les points d'interrogation,
-# d'exclamation, les deux-points et le point virgule, espace aussi apr�s
-# le point virgule).
-#
-# ESPACES INS�CABLES
-# Vous devez utiliser un espace ins�cable (c'est un espace qui ne peut
-# pas servir de rupture � la ligne) avant le point d'exclamation, le
-# point d'interrogation, le deux-points, le point virgules, et pour les
-# "quantit�s", entre le nombre et l'unit� abbr�g�e (par exemple "10 g").
-# L'espace normal en ISO et UTF8 est le caractere 0x20 tandis que l'espace
-# ins�cable est le caract�re 0xA0. Sous Emacs en utilisant le po mode
-# livr� avec gettext >= 0.10.40-4mdk vous pouvez voir celui-ci avec un
-# fond de couleur sp�cial. Sous Vi celui-ci est normalement affich�
-# pr�c�d� du caract�re pipe "|". Pour le tapper sous la plupart des
-# �diteurs, vous pouvez utiliser la touche "Compose" puis en tappant
-# deux espaces. Si vous n'avez pas de touche compose, vous pouvez
-# donner cette fonction � la touche "Windows" droite de votre clavier
-# avec la commande suivante�:
-#   xmodmap -e 'keycode 116 = Multi_key'
-#
-# Les guillemets fran�aises sont ��et�� et non ". La guillemet ouvrante
-# ��est suivie d'un espace ins�cable et la guillemet fermante�� est
-# pr�c�d�e du m�me type d'espace. Pour le tapper, vous pouvez utiliser
-# la combinaison Compose < <, et Compose > >.
-#
-# Enfin, traduisez INTELLIGEMMENT et non mot � mot. Certaines traductions
-# n'ont aucun sens en fran�ais.
-#
-# Nous vous remercions de votre compr�hension.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX for MDK 8.1\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-06 01:36GMT+1\n"
-"Last-Translator: Combelles Christophe <ccomb@club-internet.fr>\n"
-"Language-Team: french <fr@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-15\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configurer les �crans s�par�ment"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "�taler l'affichage sur plusieurs �crans (Xinerama)"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configurer seulement la carte ��%s�� (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Configuration multi-�crans"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Votre syst�me peut utiliser simultan�ment plusieurs �crans.\n"
-"Que souhaitez-vous faire�?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Carte graphique"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Choisissez une carte graphique"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Choisissez un serveur d'affichage (serveur XFree)"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "serveur XFree"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Choisissez un pilote d'affichage X11"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "serveur X11"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Quelle configuration d'XFree d�sirez-vous utiliser�?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Votre carte vid�o peut utiliser l'acc�l�ration 3D mat�rielle mais\n"
-"uniquement en utilisant XFree %s.\n"
-"Votre carte vid�o est support�e par XFree %s. Ce dernier peut �tre plus\n"
-"performant en 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Votre carte vid�o peut utiliser l'acc�l�ration 3D mat�rielle avec XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s avec acc�l�ration 3D mat�rielle"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Votre carte vid�o peut utiliser l'acc�l�ration 3D mat�rielle en utilisant\n"
-"XFree %s.\n"
-"Veuillez noter que ce support est EXP�RIMENTAL et qu'il peut BLOQUER VOTRE\n"
-"ORDINATEUR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s avec support EXP�RIMENTAL de l'acc�l�ration 3D mat�rielle"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Votre carte vid�o peut utiliser l'acc�l�ration 3D mat�rielle mais\n"
-"uniquement en utilisant XFree %s.\n"
-"Attention, veuillez noter que ce support est EXP�RIMENTAL et peut BLOQUER\n"
-"VOTRE ORDINATEUR.\n"
-"\n"
-"Votre carte vid�o est support�e par XFree %s. Ce dernier peut �tre plus\n"
-"performant en 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation du pilote d'affichage)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configuration d'XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr ""
-"Veuillez pr�ciser la quantit� de m�moire vid�o de votre carte graphique"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Choisissez les options du serveur d'affichage"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Choisissez un moniteur"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Moniteur"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Les deux param�tres importants sont la fr�quence de rafra�chissement\n"
-"verticale (qui d�termine la vitesse � laquelle l'�cran est rafra�chi)\n"
-"et, surtout, la fr�quence de synchronisation horizontale (qui d�termine\n"
-"la vitesse � laquelle les lignes sont trac�es).\n"
-"\n"
-"Il ne faut SURTOUT PAS choisir un type de moniteur ayant\n"
-"une fr�quence de rafra�chissement exc�dant les capacit�s de votre\n"
-"moniteur. Vous risqueriez de l'endommager.\n"
-"En cas de doute, choisissez un r�glage moins performant mais\n"
-"sans risque pour votre mat�riel."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Fr�quence horizontale"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Fr�quence verticale"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Le moniteur n'est pas configur�"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "La carte graphique n'est pas encore configur�e"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "La r�solution n'a pas encore �t� choisie"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "D�sirez-vous tester la configuration�?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Attention�: tester cette carte vid�o peut bloquer votre ordinateur"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test de la configuration"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"essayez de modifier quelques param�tres"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Une erreur est survenue�:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Fin du test dans %d secondes"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "�tes-vous satisfait(e)�?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr ""
-"Une erreur est survenue, essayez de modifier\n"
-"quelques param�tres"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "R�solution"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Choix de la r�solution et du nombre de couleurs"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Carte graphique�: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Serveur XFree86�: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Davantage"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Mode expert"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Tout montrer"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "R�solutions"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Type de clavier�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Type de souris�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "P�riph�rique�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Moniteur�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Fr�quence horizontale�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Fr�quence verticale�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Carte graphique�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Indentification de la carte graphique�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "M�moire vid�o�: %s�ko\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Nombre de couleurs�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "R�solution�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Serveur XFree86�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Pilote XFree86�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Pr�paration de la configuration de X Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Que d�sirez-vous faire�?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Choisir un type de moniteur"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Choisir un type de carte graphique"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Changer les options du serveur d'affichage"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Changer la r�solution"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Afficher la configuration actuelle"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Tester � nouveau"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Quitter"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"D�sirez-vous conserver les changements�?\n"
-"La configuration actuelle est�:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Interface graphique lors du d�marrage"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Voulez-vous que l'interface graphique soit\n"
-"automatiquement lanc�e lors du d�marrage�?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Veuillez relancer %s pour activer les changements"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Veuillez vous d�connecter puis presser simultan�ment les touches Ctrl-Alt-"
-"BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 couleurs (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 768 couleurs (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 536 couleurs (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16,7 millions de couleurs (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4,3 milliards de couleurs (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 ko"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 ko"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 Mo ou plus"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 � 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 � 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 � 87 Hz entrelac� (sans 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 � 87 Hz entrelac�, 800x600 � 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA �tendu, 800x600 � 60 Hz, 640x480 � 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA non entrelac�, 1024x768 � 60 Hz, 800x600 � 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA haute fr�quence, 1024x768 � 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-fr�quences supportant le 1280x1024 � 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-fr�quences supportant le 1280x1024 � 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-fr�quences supportant le 1280x1024 � 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Moniteur supportant le 1600x1200 � 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Moniteur supportant le 1600x1200 � 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Premier secteur de la partition d'amor�age"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Premier secteur du disque (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Installation de SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "O� d�sirez-vous installer le programme d'amor�age�?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Installation de LILO ou Grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO en mode texte"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO en mode graphique"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "D�marrer � partir de DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Principales options du programme d'amor�age"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Programme d'amor�age � utiliser"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Installation du programme d'amor�age"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "P�riph�rique d'amor�age"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne fonctionne pas avec des BIOS anciens)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Mode vid�o"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "D�lai avant l'activation du choix par d�faut"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Mot de passe"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Mot de passe (v�rif)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Prot�ger par mot de passe les options"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "Protection des options"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Vider le dossier /tmp � chaque d�marrage"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Pr�cisez la taille m�moire si n�cessaire (%d�Mo trouv�s)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Autoriser plusieurs profils"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Indiquez la quantit� de m�moire en Mo"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Le protection des options est inutile sans mot de passe"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Veuillez r�essayer"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Les mots de passe ne correspondent pas"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Message de d�marrage"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "D�lai de l'Open Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "D�lai d'amor�age du noyau"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Autoriser le d�marrage sur CD�?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Autoriser le d�marrage sur l'OF�?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "OS par d�faut�?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Vous avez d�cid� d'installer le programme d'amor�age sur une partition.\n"
-"Cela implique que vous ayez d�j� un programme d'amor�age sur le disque dur "
-"sur lequel le syst�me d�marre (ie:�System Commander).\n"
-"\n"
-"Sur quel disque est-ce que le syst�me d�marre�?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Voici les diff�rentes entr�es.\n"
-"Vous pouvez en rajouter de nouvelles ou changer les entr�es existantes."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Ajouter"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Terminer"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modifier l'�l�ment s�lectionn�"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Quel type de syst�me voulez-vous ajouter�?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Autres syst�mes (SunOS, etc.)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Autres syst�mes (MacOS, etc.)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Autres syst�mes (Windows, etc.)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "fichier noyau"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Partition racine"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "options pass�es au noyau"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Fichier RamDisk"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Pr�activ� en �criture"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Table des partitions"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Peu s�r"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Label"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Choix par d�faut"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Taille du RamDisk"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Supprimer l'entr�e"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Un label vide n'est pas autoris�"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Vous devez sp�cifier l'image noyau d�sir�e"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Vous devez sp�cifier une partition racine"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ce label est d�j� utilis�"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Interface(s) %s %s d�tect�e(s)"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "En poss�dez-vous d'autres�?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Poss�dez-vous des interfaces %s�?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Non"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Oui"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Voir les informations sur le mat�riel"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installation du pilote pour la carte %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Quel pilote %s faut-il essayer�?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Le pilote de mat�riel ��%s�� a parfois besoin d'options suppl�mentaires\n"
-"pour fonctionner de mani�re optimale.\n"
-"Vous pouvez lui fournir manuellement ces options,\n"
-"ou bien lui laisser les d�tecter automatiquement.\n"
-"(La d�tection peut dans certains cas bloquer l'ordinateur,\n"
-"mais sans lui causer de dommage.)"
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "D�tection automatique"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Sp�cifier des options"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Vous pouvez maintenant founir des options au module %s.\n"
-"Veuillez noter que les adresses doivent �tre g�n�ralement pr�fix�es de 0x, "
-"comme '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Vous pouvez maintenant pr�ciser les options du module %s.\n"
-"Les options sont de la forme ��nom=valeur nom2=valeur2 ...��.\n"
-"Par exemple, ��io=0x300 irq=7��"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Options du module�:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Le chargement du module %s a �chou�.\n"
-"D�sirez-vous r�essayer avec d'autres param�tres�?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "acc�s aux programmes graphiques"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "acc�s aux outils rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "autoriser ��su��"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "acc�s aux fichiers d'administration"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "Utilisateur(s) existant(s)�: %s"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ce mot de passe est trop simple"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Veuillez taper un nom d'utilisateur"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Le nom d'utilisateur ne peut contenir que des lettres minuscules,\n"
-"des nombres, ainsi que les caract�res ��-�� et ��_��"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ce nom d'utilisateur est d�j� utilis�"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Ajouter un utilisateur"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Cr�er un compte utilisateur\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Accepter"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nom et pr�nom"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nom d'utilisateur"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Interpr�teur"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ic�ne"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Connexion automatique"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Lors du d�marrage, voulez-vous que le syst�me connecte\n"
-"automatiquement un utilisateur par d�faut�?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Choisissez l'utilisateur par d�faut�:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Choisissez l'environnement graphique�:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Choisissez la langue�:"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Vous pouvez choisir d'autres langues.\n"
-"Elles seront disponibles apr�s l'installation."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Tout"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Autoriser tous les utilisateurs"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personnalis�e"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Pas de partage"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Le paquetage %s doit �tre install�. Voulez-vous l'installer�?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-"Voulez-vous exporter par NFS (protocole Unix) ou SMB (protocole Windows)?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Le paquetage %s, qui est obligatoire, est manquant"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Voulez-vous permettre aux utilisateurs de partager certains sous-r�pertoires de leur r�pertoire personnel (/home)�?\n"
-"Permettre cela autorisera les utilisateurs � cliquer simplement sur ��Partager�� dans konqueror et nautilus.\n"
-"\n"
-"��Personnalis�e�� permet de choisir pour chaque utilisateur.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Annuler"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Lancer userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Le partage par utilisateur utilise le groupe ��fileshare��.\n"
-"Vous pouvez utiliser userdrake pour rajouter un utilisater dans ce groupe."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bienvenue aux pirates"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Tr�s faible"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "�lev�e"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Plus �lev�e"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Parano�aque"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ce niveau de s�curit� doit �tre utilis� avec pr�caution. Il rend votre\n"
-"syst�me plus facile � utiliser, aux d�pens de la s�curit�. Il ne devrait\n"
-"donc pas �tre utilis� sur une machine connect�e � un r�seau ou � "
-"l'internet.\n"
-"Aucun mot de passe n'est requis."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Les mots de passe sont maintenant requis. Pour autant, il n'est pas\n"
-"recommand� d'utiliser cette machine sur un r�seau."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ceci est le niveau de s�curit� standard recommand� pour un ordinateur \n"
-"utilis� pour se connecter � l'internet en tant que client."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Il y a d�j� des restrictions, et des v�rifications automatiques sont "
-"effectu�es chaque nuit."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Avec ce niveau de s�curit�, l'utilisation de cette machine en tant que\n"
-"serveur devient envisageable. La s�curisation est suffisamment forte pour\n"
-"accepter les connexions de nombreux clients. Note�: si votre machine est\n"
-"seulement connect�e en tant que client sur Internet, vous devriez plut�t\n"
-"choisir un niveau inf�rieur."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Ce niveau de s�curit� est bas� sur le pr�c�dent mais le syst�me est "
-"maintenant\n"
-"compl�tement clos (vu du r�seau). La s�curit� est maximale."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Choisissez le niveau de s�curit�"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Niveau de s�curit�"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Utilisation de ��libsafe�� pour les serveurs"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Une biblioth�que qui prot�ge contre les attaques par d�bordement de pile.\n"
-"(les plus fr�quentes)"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bienvenue dans %s, le chargeur de systemes d'exploitation.\n"
-"\n"
-"Choisissez un systeme d'exploitation dans la liste ci-dessus.\n"
-"-- Demarrage automatique dans %d secondes.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bienvenue dans GRUB, le chargeur de systemes d'exploitation"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Utilisez les touches %c et %c pour faire votre choix."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Appuyez sur <Entree> pour demarrer, sur <e> pour modifier la"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commande de demarrage ou sur <c> pour utiliser la ligne de commande."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Demarrage automatique dans %d secondes."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "il n'y a pas assez de place dans le dossier /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Bureau"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menu D�marrer"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-"Vous ne pouvez pas installer le programme d'amor�age\n"
-"sur une partition %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pas d'aide disponible pour l'instant.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuration du style de d�marrage"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fichier"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fichier/_Quitter"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Moniteur nouveau style avec cat�gorisation"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Moniteur nouveau style"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Moniteur traditionnel"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Moniteur traditionnel Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "D�marrage enti�rement graphique (Aurora)"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Menu d'amor�age"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Menu d'amor�age"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Le choix du syst�me d'exploitation est actuellement g�r� par %s.\n"
-"Vous pouvez ici modifier la liste du menu d'amor�age."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configurer"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Choix pour l'interface utilisateur"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Lancer l'interface graphique au d�marrage"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne pas connecter automatiquement un utilisateur"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Connexion automatique (choisir utilisateur et environnement)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Impossible de lire le fichier /etc/inittab �: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "Go"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "Ko"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mo"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "To"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutes"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minute"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d secondes"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Impossible de faire des captures d'�cran avant le partitionnement"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Les captures d'�cran seront disponibles apr�s l'installation dans %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "France"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgique"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "R�publique Tch�que"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Allemagne"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Gr�ce"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norv�ge"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Su�de"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Pays-Bas"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italie"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Autriche"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "�tats-Unis"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr ""
-"Avant d'utiliser un logiciel de partitionnement de disques,\n"
-"il est prudent de faire une copie de sauvegarde de vos donn�es�!!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "MISE EN GARDE"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Si vous voulez utiliser ��aboot��, vous devez r�server\n"
-"un espace libre d'au moins 2048 secteurs au d�but du disque."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Erreur"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistant"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Choisissez une action"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Votre disque poss�de une seule grande partition, qui est de type FAT\n"
-"(g�n�ralement utilis� par Microsoft DOS ou Windows).\n"
-"Vous devriez la r�duire pour pouvoir cr�er d'autres partitions�:\n"
-"cliquez sur la partition puis sur ��Redimensionner��."
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Veuillez cliquer sur une partition"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "D�tails"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "SF journalis�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Vide"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Autre"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Types des syst�mes de fichiers�:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Cr�er"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Type"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Utilisez plut�t ��%s��"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Supprimer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Cliquez d'abord sur ��D�monter��"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Apr�s avoir modifi� le type de la partition %s, toutes les donn�es\n"
-"pr�sentes sur cette partition seront perdues."
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Choisissez une partition"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Choisissez une autre partition"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Quitter"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Passer en mode expert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Passer en mode normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "�tat pr�c�dent"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "D�sirez-vous tout de m�me continuer�?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Quitter sans sauvegarder"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "D�sirez-vous r�ellement quitter sans �crire la table des partitions�?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "D�sirez-vous sauvegarder les modifications de /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Partitionnement automatique"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Supprimer toutes les partitions"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informations sur les disques durs"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Toutes les partitions primaires sont utilis�es"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Impossible d'ajouter une partition"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Pour pouvoir utiliser plus de partitions, vous devez d'abord en supprimer "
-"une pour la remplacer par une partition �tendue."
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Sauvegarder la table des partitions..."
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Charger une table des partitions..."
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Deviner automatiquement la table des partitions"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Relire la table des partitions"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Auto-montage des p�riph�riques amovibles"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "S�lectionnez un fichier"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La table des partitions contenue sur la sauvegarde\n"
-"n'a pas la m�me taille que le disque.\n"
-"D�sirez-vous tout de m�me continuer�?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Attention"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ins�rez une disquette dans le lecteur.\n"
-"Toutes les donn�es pr�sentes sur cette disquette seront perdues."
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Tentative de lecture de l'organisation des partitions..."
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Informations d�taill�es"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Point de montage"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Options"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Redimensionner"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "D�placer"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formater"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Monter"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Ajouter au RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Ajouter au LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "D�monter"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Supprimer du RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Supprimer du LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modifier le RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Utiliser pour loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Cr�er une nouvelle partition"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Secteur de d�but�: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Taille en Mo�: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Type du syst�me de fichiers�: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Point de montage�: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Pr�f�rence�: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Supprimer le fichier loopback�?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Changement du type de partition"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Quel syst�me de fichiers d�sirez-vous utiliser�?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Passage de ext2 � ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "O� d�sirez-vous monter le fichier loopback %s�?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "O� d�sirez-vous monter la partition %s�?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Il est impossible de d�s�lectionner ce point de montage car il est\n"
-"utilis� pour le loopback. Veuillez supprimer ce dernier d'abord."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Calcul des limites du syst�me de fichiers FAT ..."
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Redimensionnement"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Cette partition ne peut pas �tre redimensionn�e"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"Toutes les donn�es pr�sentes sur cette partition\n"
-"devraient avoir �t� sauvegard�es."
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Apr�s avoir redimensionn� la partition %s, toutes les donn�es pr�sentes\n"
-"sur cette partition seront perdues"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Choisissez la nouvelle taille"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nouvelle taille en Mo�: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Sur quel disque voulez-vous la d�placer�?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Secteur"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Sur quel secteur voulez-vous la d�placer�?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "D�placement"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "D�placement de la partition..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Choisissez un RAID existant"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "Nouveau"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Choisissez un LVM existant"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Nom LVM�?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Cette partition ne peut pas �tre utilis�e pour du loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nom du fichier loopback�:"
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Donnez un nom de fichier"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Ce fichier est d�j� utilis� par un autre loopback.\n"
-"Veuillez en choisir un autre."
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Le fichier existe d�j�. Faut-il l'utiliser�?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Options de montage"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Divers"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "P�riph�rique"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "Niveau de RAID"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "Taille de bloc"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Soyez prudent�: cette op�ration est dangereuse."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Quel type de partitionnement�?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Le programme d'amor�age LILO ne peut pas fonctionner si vous placez\n"
-"la partition du dossier /boot aussi loin sur le disque (c'est-�-dire\n"
-"au del� du 1024�me cylindre). Si vous n'utilisez pas LILO, vous n'avez\n"
-"pas besoin de partition sp�cifique pour le dossier /boot."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Attention, votre partition racine se situe au del� du 1024�me cylindre.\n"
-"Si vous comptez utiliser le programme d'amor�age LILO, vous devez cr�er\n"
-"une autre partition juste pour le dossier /boot en de�� du 1024�me cylindre."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Attention, vous avez choisi une partition RAID logiciel comme partition\n"
-"racine. Pour que votre syst�me puisse d�marrer, vous devez ajouter\n"
-"une partition non RAID, sp�cifique pour le dossier /boot."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr ""
-"La table des partitions de %s va maintenant �tre �crite sur le disque�!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Vous devez red�marrer pour que les modifications soient prises en compte"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Apr�s avoir format� la partition %s, toutes les donn�es pr�sentes\n"
-"sur cette partition seront perdues."
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatage"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatage du fichier loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatage de la partition %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Cacher les fichiers"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "D�placer les fichiers sur la nouvelle partition"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Le dossier %s contient d�j� des donn�es\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "D�placement des fichiers sur la nouvelle partition..."
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Copie de %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Suppression de %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "la partition %s est maintenant connue comme %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "P�riph�rique�: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lettre de lecteur DOS suppos�e�: %s:\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Type�: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nom�: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "D�but�: secteur %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Taille�: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s secteurs"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylindre %d � %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Format�e\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Non format�e\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Mont�e\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "Appartient au RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Fichier(s) loopback�:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition d'amor�age par d�faut\n"
-"(pour DOS/Windows, pas pour LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "RAID de niveau %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Taille de bloc %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "disques RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nom du fichier loopback�: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Il y a des chances que cette partition\n"
-"soit une partition de pilotes syst�mes,\n"
-"vous ne devriez pas la toucher.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Cette partition d'amor�age (bootstrap)\n"
-"est n�cessaire si vous avez plusieurs\n"
-"syst�mes d'exploitation. \n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Taille�: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "G�om�trie�: %s cylindres, %s t�tes, %s secteurs\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Information�: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "disques LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Table des partitions de type�: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "sur bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Options�: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Clef de chiffrement du syst�me de fichiers"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Choisissez la clef de chiffrement du syst�me de fichiers"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Cette clef de chiffrement est trop courte (minimum %d caract�res)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Les clefs de chiffrement ne correspondent pas"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Clef de chiffrement"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Clef de chiffrement (confirmation)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Changer le type"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Veuillez cliquer sur une source"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Rechercher les serveurs"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "le formatage au format %s de %s a �chou�"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Impossible de formater %s au format %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "le montage de la partition %s dans le r�pertoire %s a �chou�"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck a �chou� avec le code de sortie %d ou le signal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Le d�montage de %s a �chou�: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simple"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "avec /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "serveur"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Les partitions JFS doivent faire plus de 16 Mo."
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Les partitions ReiserFS doivent faire plus de 32 Mo."
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Les points de montage doivent commencer par /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Le point de montage %s est d�j� utilis�\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-"Vous ne pouvez pas utiliser une partition logique LVM pour le point de "
-"montage %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ce dossier devrait rester dans la partition racine"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Vous avez besoin d'un vrai syst�me de fichiers (ext2, reiserfs) pour ce "
-"point de montage\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Vous ne pouvez pas utiliser de syst�me de fichiers crypt� pour le point de "
-"montage %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Pas assez d'espace libre pour le partitionnement automatique"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Rien � faire"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erreur lors de l'ouverture de %s en �criture�: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Une erreur est survenue�: aucun p�riph�rique valide n'a �t� trouv� pour\n"
-"cr�er de nouvelles partitions. Veuillez v�rifier votre mat�riel."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Vous n'avez d�fini aucune partition�!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux est un syst�me multi-utilisateurs, ce qui signifie g�n�ralement que chaque\n"
-"utilisateur peut avoir des pr�f�rences diff�rences, ses propres fichiers,\n"
-"etc. Pour plus d'informations, consultez le manuel d'utilisation.\n"
-"Contrairement � ��root�� qui a tous les droits, les utilisateurs que vous\n"
-"ajouterez ici n'auront que des permissions pour agir sur leurs propres\n"
-"fichiers exclusivement.\n"
-"\n"
-"L'utilisateur/administrateur devrait �galement se cr�er un compte\n"
-"��normal��. C'est � travers cet utilisateur que celui-ci devrait se\n"
-"connecter pour accomplir ses t�ches quotidiennes. Car, bien qu'il soit\n"
-"pratique d'avoir tous les acc�s, cette situation peut �galement engendrer\n"
-"des situations d�sastreuses si un fichier est d�truit par inadvertance. Un\n"
-"utilisateur normal n'ayant pas acc�s aux fichiers sensibles, ne peut causer\n"
-"de dommages majeurs.\n"
-"\n"
-"Il faut d'abord entrer le vrai nom de la personne. �videmment, vous pouvez\n"
-"y inscrire n'importe quoi. DrakX prendra le premier mot ins�r� et le\n"
-"transposera comme ��Nom de login��. C'est le nom qui sera utilis� pour se\n"
-"connecter au syst�me. Vous pouvez le modifier. Il faut maintenant entrer un\n"
-"mot de passe. Celui-ci n'est pas aussi crucial que le mot de passe de\n"
-"��root��, mais ce n'est pas une raison pour rentrer 123456. Apr�s tout,\n"
-"ceci mettrait vos fichiers en p�ril.\n"
-"\n"
-"Si vous cliquez ��Accepter��, il vous sera possible d'ajouter d'autres\n"
-"utilisateurs. Cr�ez un utilisateur diff�rent pour chaque personne devant\n"
-"utiliser votre ordinateur. Une fois chaque utilisateur d�fini, cliquez sur\n"
-"��Terminer��.\n"
-"\n"
-"En cliquant sur ��Avanc頻, vous pourrez s�lectionner un ��shell��\n"
-"diff�rent pour cet utilisateur (bash est assign� par d�faut)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ci-dessus sont list�es les partitions linux existantes d�tect�es sur votre "
-"syst�me.\n"
-"Vous pouvez garder les choix faits par l'assistant, ils sont corrects pour "
-"la plupart\n"
-"des installations courantes. Si vous changez quoi que ce soit, vous devez au "
-"moins\n"
-"d�finir une partition racine ��/��. Ne choisissez pas une partition trop "
-"petite, sinon\n"
-"vous ne pourrez pas installer assez de logiciels. Si vous voulez stocker vos "
-"donn�es\n"
-"sur une partition s�par�e, vous devrez �galement cr�er une partition pour le "
-"dossier\n"
-"��/home�� (seulement possible si vous avez au moins deux partitions linux "
-"disponibles).\n"
-"\n"
-"Chaque partition est d�crite comme suit�: ��Nom��, ��Capacit頻.\n"
-"\n"
-"Le ��Nom�� est cod� comme suit�: ��type du disque dur��,\n"
-"��num�ro du disque dur��, ��num�ro de la partition�� (par exemple,\n"
-"��hda1��).\n"
-"\n"
-"Le ��type du disque dur�� est ��hd�� si votre disque dur\n"
-"est un disque dur IDE ou ��sd�� s'il s'agit d'un disque SCSI.\n"
-"\n"
-"Le ��num�ro du disque dur�� est toujours une lettre qui suit ��hd�� ou ��sd "
-"��:\n"
-"- avec un disque dur IDE,\n"
-"   * ��a�� signifie ��disque ma�tre sur le premier port IDE��,\n"
-"   * ��b�� signifie ��disque esclave sur le premier port IDE��,\n"
-"   * ��c�� signifie ��disque ma�tre sur le second port IDE��,\n"
-"   * ��d�� signifie ��disque esclave sur le second port IDE��.\n"
-"- avec un disque dur SCSI, un ��a�� signifie ��premier disque dur��,\n"
-"��b�� signifie ��second disque dur��, etc.�dans l'ordre des IDs SCSI�."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Les paquetages requis � l'installation de Mandrake Linux sont distribu�s sur plusieurs\n"
-"CDROM. Heureusement, DrakX conna�t l'emplacement de chacun des paquetages.\n"
-"Il �jectera celui pr�sent dans le lecteur et vous demandera d'ins�rer le\n"
-"CDROM appropri�, selon le cas."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"C'est maintenant le moment de choisir les paquetages qui seront install�s\n"
-"sur votre syst�me. Sachez que Mandrake Linux contient plusieurs milliers de paquetages �\n"
-"installer, et qu'il n'est pas n�cessaire de tous les conna�tre par coeur.\n"
-"\n"
-"Si vous �tes en train de faire une installation normale � partir d'un\n"
-"CDROM, il vous sera d'abord demand� de sp�cifier quel CD vous avez (en mode\n"
-"Expert). V�rifier les �tiquettes et cliquez sur les bo�tes leur �tant\n"
-"associ�es. Cliquez sur ��OK��, lorsque vous �tes pr�t � continuer.\n"
-"\n"
-"Les paquetages sont regroup�s selon la nature de l'installation. Les\n"
-"groupes sont divis�s en quatre sections principales:\n"
-"\n"
-" * ��Station de travail��: si vous comptez utiliser votre machine ainsi,\n"
-"s�lectionner un ou plusieurs groupes y correspondant.\n"
-"\n"
-" * ��Environnement graphique��: ce groupe vous permettra de d�terminer quel\n"
-"environnement graphique vous voulez avoir sur votre syst�me. �videmment, il\n"
-"vous en faut au moins un pour utiliser votre station en mode graphique.\n"
-"\n"
-" * ��D�veloppement��: si votre syst�me sera utilis� pour la programmation,\n"
-"choisissez les groupes d�sir�s.\n"
-"\n"
-" * ��Serveur��: finalement, si vous syst�me doit agir en tant que serveur,\n"
-"vous pourrez s�lectionner les services que vous voulez installer.\n"
-"\n"
-" * ��Environnement graphique��: ce groupe vous permettra de d�terminer quel\n"
-"environnement graphique vous voulez avoir sur votre syst�me. �videmment, il\n"
-"vous en faut au moins un pour utiliser votre station en mode graphique.\n"
-"\n"
-"En pla�ant votre souris au dessus d'un nom de groupe, vous verrez\n"
-"appara�tre une courte description de ce groupe. Si vous d�s�lectionnez tous\n"
-"les groupes lors d'une installation standard (par opposition � une mise �\n"
-"jour), un dialogue appara�tra proposant diff�rentes options pour une\n"
-"installation minimale:\n"
-"\n"
-" * ��Avec X��: installe le moins de paquetages possible pour avoir un\n"
-"environnement de travail graphique;\n"
-"\n"
-" * ��Avec la documentation de base��: installe le syst�me de base plus\n"
-"certains utilitaires de base et leur documentation. Cette installation est\n"
-"utilisable comme base pour monter un serveur;\n"
-"\n"
-" * ��Installation vraiment minimale��: installera le strict minimum\n"
-"n�cessaire pour obtenir un syst�me fonctionnel, en ligne de commande. Cette\n"
-"installation prends � peu pr�s 65Mo.\n"
-"\n"
-"Vous pouvez finalement cocher l'option ��S�lection individuelle des\n"
-"paquetages��. Cette option est � utiliser si vous connaissez exactement le\n"
-"paquetage d�sir� ou si vous voulez avoir le contr�le total de votre\n"
-"installation.\n"
-"\n"
-"Si vous avez d�marr� l'installation en mode \"mise � jour\", vous pouvez\n"
-"\"d�-s�lectionner\" tous les groupes afin d'�viter l'installation de\n"
-"nouveaux programmes. Cette option est tr�s utile pour restaurer un syst�me\n"
-"d�fectueux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finalement, si vous avez choisi de s�lectionner individuellement les\n"
-"paquetages � installer, DrakX vous pr�sentera un arbre contenant tous les\n"
-"paquetages, class�s par groupes et sous-groupes. En naviguant � travers\n"
-"l'arbre, vous pouvez s�lectionner des groupes, des sous-groupes ou des\n"
-"paquetages individuels.\n"
-"\n"
-"D�s que vous s�lectionnez un paquetage dans l'arbre, une descriptions\n"
-"appara�t � droite. Une fois votre s�lection compl�t�e, cliquez sur\n"
-"��Installation�� pour lancer le processus. Soyez patient, car en fonction\n"
-"du type d'installation choisi ou du nombre de paquetages s�lectionn�s, le\n"
-"temps requis peut �tre substantiellement diff�rent. Une estimation du temps\n"
-"requis est pr�sent�e sur l'�cran en cours d'op�ration afin de vous\n"
-"permettre d'�valuer de combien de temps vous disposez pour prendre votre\n"
-"d�jeuner.\n"
-"\n"
-"!! Si un logiciel serveur a �t� s�lectionn�, vous devrez confirmer que vous\n"
-"voulez vraiment que celui-ci soit install�. Sous Mandrake, par d�faut, tous\n"
-"les serveurs install�s sont lanc�s au d�marrage. Malgr� tous les efforts\n"
-"investis pour vous livrer une distribution Linux s�curitaire, il est\n"
-"possible que certaines failles de s�curit� affectes les serveurs install�s\n"
-"au-del� de la date de publication. Si vous ne savez pas pr�cis�ment � quoi\n"
-"sert un serveur en particulier ou pourquoi il est install�, cliquez sur\n"
-"��NON��. En cliquant sur ��OUI��, le serveur sera install� et le service\n"
-"rendu disponible au d�marrage. !!\n"
-"\n"
-"L'option ��D�pendances automatiques�� d�sactive les avertissements qui\n"
-"apparaissent � chaque fois que l'installeur s�lectionne un nouveau paquet.\n"
-"Ces avertissements surviennent parce que DrakX a d�termin� que pour qu'un\n"
-"paquetage soit fonctionnel, il lui en faut un autre dont il est d�pendant.\n"
-"\n"
-"La petite ic�ne de disquette qui appara�t au bas de la liste permet de\n"
-"r�cup�rer une liste de paquetages s�lectionn�s durant une autre\n"
-"installation. En cliquant dessus, on vous demandera d'ins�rer la disquette\n"
-"cr��e lors d'une installation pr�c�dente. Voir la deuxi�me note de la\n"
-"derni�re �tape afin de savoir comment cr�er une telle disquette."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Si vous d�sirez connecter votre syst�me � un r�seau ou � l'Internet,\n"
-"cliquez sur ��OK��. L'autod�tection des p�riph�riques r�seau et modems sera\n"
-"alors lanc�e. Si cette d�tection �choue, d�cochez la case ��Utiliser\n"
-"l'autod�tection��. Vous pouvez aussi choisir de ne pas configurer le\n"
-"r�seau, ou de le faire plus tard. Dans ce cas, cliquez simplement sur\n"
-"��Annuler��.\n"
-"\n"
-"Les types de connexion support�es sont: modem t�l�phonique, modem ISDN,\n"
-"connexion ADSL, modem c�ble ou simplement LAN (r�seau ethernet).\n"
-"\n"
-"Nous ne d�taillerons pas ici chacune des configurations possible. Assurez\n"
-"vous seulement que vous avez toutes les informations de votre fournisseur\n"
-"de service Internet � port�e de main.\n"
-"\n"
-"Vous pouvez consulter le chapitre du �Guide de l'utilisateur� concernant les connexions � Internet\n"
-"pour plus de d�tails � propos des configurations sp�cifiques de chaque type\n"
-"de connexion. Vous pouvez �galement configurer votre connexion � Internet\n"
-"une fois l'installation termin�e.\n"
-"\n"
-"Si vous d�sirez configurer votre r�seau plus tard ou si vous avez termin�\n"
-"l'installation de votre r�seau, cliquez sur ��Annuler��."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Vous pouvez maintenant choisir les services disponibles au d�marrage de\n"
-"votre syst�me.\n"
-"\n"
-"Ici sont pr�sent�s tous les services disponibles avec l'installation en\n"
-"place. Faites une bonne v�rification et enlevez tout ce qui n'est pas\n"
-"absolument n�cessaire au d�marrage du syst�me.\n"
-"\n"
-"Vous pouvez obtenir une courte explication des services en les\n"
-"s�lectionnant sp�cifiquement. Cela dit, si vous n'�tes pas certain de\n"
-"l'application d'un service, conservez les param�tres par d�faut\n"
-"\n"
-"!! � cette �tape, soyez particuli�rement attentif dans le cas d'un syst�me\n"
-"destin� � agir comme serveur. Dans ce cas, vous voudrez probablement\n"
-"permettre exclusivement les services n�cessaires. !!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU-Linux manipule l'heure au format GMT (Greenwich Mean Time) et la "
-"convertit en\n"
-"temps local selon le fuseau horaire choisi. Il est n�anmoins possible de\n"
-"d�sactiver cela en d�s�lectionnant ��Horloge syst�me r�gl�e sur le m�ridien\n"
-"de Greenwich�� de fa�on � ce que l'horloge mat�rielle soit la m�me que\n"
-"celle du syst�me. Cela est particuli�rement utile si la machine accueille\n"
-"un autre syst�me d'exploitation tel que .\n"
-"\n"
-"La ��Synchronisation automatique�� permet de r�gler l'heure automatiquement\n"
-"en se connectant � un serveur de temps sur Internet. Dans la liste qui est\n"
-"alors pr�sent�e, choisissez un serveur g�ographiquement proche de vous.\n"
-"Vous devez avoir une connexion Internet pour que cela fonctionne bien\n"
-"entendu. Cela installera en fait sur votre machine un serveur de temps\n"
-"local qui pourra optionnellement �tre lui-m�me utilis� par d'autres\n"
-"machines de votre r�seau local."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (pour le X Window system) est le coeur de votre interface graphique sous\n"
-"GNU/Linux. Tous les environnements graphiques (Gnome, KDE, Afterstep, ...) pr�sents\n"
-"sur Mandrake Linux d�pendent de X. A cette �tape, DrakX, va tenter de le configurer\n"
-"automatiquement.\n"
-"\n"
-"Il est tr�s rare que cette �tape �choue, � moins d'avoir un �quipement\n"
-"obsol�te (ou trop r�cent). Si le processus r�ussit, il va d�marrer X\n"
-"automatiquement avec la meilleure r�solution d'�cran possible, en fonction\n"
-"de la taille du moniteur. Une fen�tre appara�t alors vous demandant si\n"
-"cette configuration vous convient.\n"
-"\n"
-"Si vous faites une installation ��Expert��, vous entrerez dans\n"
-"l'information de configuration de X. Voir les sections correspondantes du\n"
-"manuel pour plus d'information.\n"
-"\n"
-"Si vous pouvez voir le message et cliquez sur oui, DrakX continuera � la\n"
-"prochaine �tape. Si vous ne pouvez voir la fen�tre, ceci signifie que le\n"
-"test a �chou� et vous serez ramen� � l'�cran pr�c�dant en 10 secondes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Il se peut que vous ne soyez pas enti�rement satisfait � la premi�re\n"
-"tentative de configuration graphique (�cran trop petit, peu de\n"
-"couleurs...). Ainsi, m�me si X d�marre correctement, DrakX vous demande si\n"
-"la configuration vous convient. Il proposera aussi de la changer en\n"
-"affichant une liste des modes valides, si possible.\n"
-"\n"
-"En dernier recours, si vous ne pouvez pas faire fonctionner X, choisissez\n"
-"��Changer la carte graphique��, s�lectionnez ��carte non list�e��, et\n"
-"lorsqu'il vous sera demand� le serveur graphique, choisissez ��FBDev��.\n"
-"c'est une option de secours qui fonctionnera sur n'importe quelle carte\n"
-"graphique moderne. Choisissez ensuite ��Tester � nouveau�� pour vous\n"
-"assurer que tout va bien."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finalement, il vous sera demand� si vous souhaitez obtenir l'interface\n"
-"graphique d�s le d�marrage ou non. Notez que cette question sera pos�e m�me\n"
-"si vous choisissez de ne pas tester la configuration. Il est �videmment\n"
-"souhaitable de r�pondre ��Non�� si cette machine est un serveur sur\n"
-"laquelle personne n'est cens�e travailler en mode graphique."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Le CDROM d'installation de Mandrake Linux a un mode de r�cup�ration pr�d�fini. Vous pouvez\n"
-"y acc�der en d�marrant l'ordinateur sur le CDROM. Selon la version de votre\n"
-"��BIOS��, il faut lui sp�cifier de d�marrer sur le CDROM. Vous devriez\n"
-"revenir au disquette de d�marrage dans deux cas pr�cis :\n"
-"\n"
-" * Au moment d'installer le ��Programme d'amorce��, DrakX va r��crire sur le\n"
-"secteur (MBR) contenant le programme d'amorce (boot loader) afin de vous\n"
-"permettre de d�marrer avec Linux ou Windows (en prenant pour acquis que\n"
-"vous avez deux syst�mes d'exploitation install�s. Si vous r�installez\n"
-"Windows, celui-ci va r��crire sur le MBR et il vous sera d�sormais\n"
-"impossible de d�marrer Linux.\n"
-"\n"
-" * Si un probl�me survient et qu'il vous est impossible de d�marrer � partir\n"
-"du disque dur, cette disquette deviendra votre seul moyen de d�marrer votre\n"
-"syst�me Linux. Elle contient un bon nombre d'outils pour r�cup�rer un\n"
-"syst�me d�fectueux, peu importe la source du probl�me.\n"
-"\n"
-"En cliquant sur cette �tape, on vous demandera d'ins�rer une disquette. La\n"
-"disquette ins�r�e sera compl�tement effac�e et DrakX se chargera de la\n"
-"formater et d'y ins�rer les fichiers n�cessaires."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Cette �tape vous permet de d�terminer pr�cis�ment l'emplacement de votre\n"
-"installation de Mandrake Linux. Si votre disque est vide ou utilis� par un autre syst�me\n"
-"d'exploitation, vous devrez repartitionner votre disque. Partitionner un\n"
-"disque signifie de le diviser pr�cis�ment afin de cr�er un espace pour\n"
-"votre installation.\n"
-"\n"
-"Comme les effets du partition sont irr�versibles (l'ensemble du disque est\n"
-"effac�), le partitionnement est g�n�ralement intimidant et stressant pour\n"
-"un utilisateur inexp�riment�. Heureusement, une interface a �t� pr�vue �\n"
-"cet effet. Avant de commencer, r�visez vos manuels et surtout, prenez votre\n"
-"temps.\n"
-"\n"
-"Si vous �tes en mode expert, l'application DiskDrake, l'outil de\n"
-"partitionnement de Mandrake Linux, vous permettra de d�terminer pr�cis�ment l'emplacement\n"
-"de chacune de vos partitions. � partir de l'interface d'installation, vous\n"
-"pouvez lancer les assistants en cliquant sur ��Assistant��.\n"
-"\n"
-"Si des partitions ont d�j� �t� d�finies, peu importe qu'elles proviennent\n"
-"d'une autre installation ou d'un autre outil de partitionnement, il vous\n"
-"suffit de simplement choisir sur quelle partition vous voulez installer\n"
-"Mandrake.\n"
-"\n"
-"Si vos partitions ne sont pas d�finies, vous devrez les cr�er en utilisant\n"
-"l'assistant. Selon la configuration de votre disque, plusieurs options sont\n"
-"disponibles :\n"
-"\n"
-" * ��Utilisez l'espace disponible��: cette option tentera simplement de\n"
-"partitionner automatiquement l'espace inutilis� sur votre disque. Il n'y\n"
-"aura pas d'autre question.\n"
-"\n"
-" * ��Utiliser les partitions existantes��: l' assistant a d�tect� une ou\n"
-"plusieurs partitions existants sur votre disque. Si vous voulez les\n"
-"utiliser, choisissez cette option.\n"
-"\n"
-" * ��Utilisez l'espace libre sur une partition Windows��: si Microsoft Windows est install�\n"
-"sur votre disque et prend l'ensemble de l'espace vous devez cr�er une place\n"
-"pour votre installation Mandrake. Pour ce faire, vous pouvez tout effacer\n"
-"(voir ��effacer tout le disque�� ou ��Mode expert��) ou vous pouvez\n"
-"redimensionner l'espace utilis� par GNU/Linux. Le redimensionnement peut �tre\n"
-"effectu� sans pertes de donn�es, � condition que vous ayez pr�alablement\n"
-"d�fragment� la partition Windows. Une sauvegarde de Vos donn�es ne fera pas de mal\n"
-"non plus. Cette seconde option peut �tre accomplie sans perte de donn�es.\n"
-"Cette solution est recommand�e pour faire cohabiter Linux et Windows sur le\n"
-"m�me ordinateur.\n"
-"\n"
-"   Avant de choisir cette option, il faut comprendre qu'apr�s cette proc�dure\n"
-"l'espace disponible pour Windows sera r�duit. Vous aurez moins d'espace\n"
-"pour installer des logiciels ou sauvegarder de l'information avec Windows.\n"
-"\n"
-" * ��Effacer tout le disque��: si vous voulez effacer toutes les donn�es et\n"
-"les applications install�es sur votre syst�me et les remplacer par votre\n"
-"nouveau syst�me Mandrake Linux, choisissez cette option. Soyez prudent, car ce choix est\n"
-"irr�versible et permanent. Il vous sera impossible de retrouver vos donn�es\n"
-"effac�es.\n"
-"\n"
-"   !! En choisissant cette option, l'ensemble du contenu de votre disque sera\n"
-"d�truit. !!\n"
-"\n"
-" * ��Supprimer Microsoft Windows��: ce choix effacera tout simplement ce que\n"
-"contient le disque et recommencera � z�ro. Toutes les donn�es et les\n"
-"programmes pr�sents sur le disque seront effac�s.\n"
-"\n"
-"   !! En choisissant cette option, l'ensemble de votre disque sera effac�. !!\n"
-"\n"
-" * ��Mode expert��: permet de partitionner manuellement votre disque. Soyez\n"
-"prudent, parce que bien que plus puissante, cette option est dangereuse.\n"
-"Vous pouvez facilement perdre l'ensemble du contenu d'un disque. Donc, ne\n"
-"choisissez pas cette option si vous ne savez pas exactement ce que vous\n"
-"devez faire."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Votre installation de Mandrake Linux est maintenant termin�e et votre syst�me est pr�t �\n"
-"�tre utilis�. Cliquez sur ��OK�� pour red�marrer votre syst�me. Vous aurez\n"
-"alors le choix de d�marrer ou Windows (s'il est pr�sent).\n"
-"\n"
-"Le bouton ��Avanc�e�� (en mode Expert uniquement) permet deux autres\n"
-"options:\n"
-"\n"
-" * ��G�n�rer une disquette d'auto-install��: Pour cr�er une disquette\n"
-"d'installation qui permettra de reproduire l'installation que vous venez de\n"
-"r�aliser sans l'aide d'un administrateur.\n"
-"\n"
-"   Notez que les deux options suivantes apparaissent apr�s avoir cliqu� sur le\n"
-"bouton:\n"
-"\n"
-"    * ��Replay��. C'est une installation partiellement automatique o� il est\n"
-"possible de personnaliser le partitionnement du disque (exclusivement).\n"
-"\n"
-"    * ��Automatique��. Compl�tement automatique, cette installation reformate\n"
-"le disque au complet.\n"
-"\n"
-"   Cette fonctionnalit� est particuli�rement pratique pour l'installation de\n"
-"multiples syst�mes. Voir la sectionAuto install de notre site Web.\n"
-"\n"
-" * ��Sauvegarder les paquetages s�lectionn�s��(*) sauve la s�lection des\n"
-"paquetages install�s. Puis, lorsque vous ferez une autre installation,\n"
-"ins�rer la disquette dans le lecteur et acc�der au menu d'aide en tapant\n"
-"[f1], et entrez la commande suivante: ��linux defcfg=\"floppy\"��.\n"
-"\n"
-"(*) Vous avez besoin d'une disquette format�e avec FAT (pour la cr�er sous\n"
-"Linux, tapez ��mformat a:��)"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Chaque partition nouvellement d�finie doit �tre format�e, c'est � dire\n"
-"qu'un syst�me de fichier (filesystem) doit y �tre cr��.\n"
-"\n"
-"Durant cette �tape, vous pouvez �galement choisir de reformater d'autres\n"
-"partitions existantes afin d'effacer les donn�es qu'elles contiennent. Si\n"
-"c'est ce que vous d�sirez, il faut �galement choisir ces partitions.\n"
-"\n"
-"Sachez qu'il n'est pas n�cessaire de reformater toutes les partitions\n"
-"existantes. Vous devez reformater les partitions contenant le syst�me\n"
-"d'exploitation, (tel que : ��/��, ��/usr�� ou ��/var��) mais vous n'avez\n"
-"pas � reformater les partitions de donn�es que vous voulez garder,\n"
-"habituellement ��/home��.\n"
-"\n"
-"Restez prudent au moment de s�lectionner les partitions. Une fois format�e,\n"
-"toutes les donn�es contenues sur les partitions s�lectionn�es seront\n"
-"d�truites et il sera impossible de les r�cup�rer.\n"
-"\n"
-"Cliquez sur ��OK�� lorsque vous �tre pr�t � formater vos partitions.\n"
-"\n"
-"Cliquez sur ��Annuler�� si vous voulez choisir d'autres partitions pour\n"
-"votre installation.\n"
-"\n"
-"Cliquez sur ��Avanc頻, si vous d�sirez choisir les partitions qui seront\n"
-"v�rifi�es pour des secteurs corrompus."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Votre nouveau syst�me Mandrake Linux est maintenant en cours d'installation. Selon le\n"
-"nombre de paquetages � installer et la puissance de votre ordinateur, cette\n"
-"op�ration peut prendre de quelques minutes � quelques heures."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Au moment o� vous �tes en train d'installer Mandrake Linux, il est possible que certains\n"
-"paquetages aient �t� mis � jour depuis la sortie du produit. Des bogues ont\n"
-"pu �tre corrig�s, et des probl�mes de s�curit� r�solus. Pour vous permettre\n"
-"de b�n�ficier de ces mises � jour, il vous est maintenant propos� de les\n"
-"t�l�-charger sur Internet. Choisissez ��Oui�� si vous avez une connexion\n"
-"Internet, ou ��Non�� si vous pr�f�rez installer les mises � jour plus tard.\n"
-"\n"
-"En choisissant ��Oui��, la liste des sites depuis lesquels les mises �\n"
-"jours peuvent �tre t�l�-charg�es est affich�e. Choisissez le site le plus\n"
-"proche. Puis un arbre de choix des paquetages appara�t: v�rifiez la\n"
-"s�lection, puis cliquez sur ��Installer�� pour t�l�-charger et installer\n"
-"les mises � jour s�lectionn�es, ou ��Annuler�� pour abandonner."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Avant d'aller plus loin, il est fortement recommand� de lire attentivement\n"
-"les termes et conditions d'utilisations de la licence. Celle-ci r�git\n"
-"l'ensemble de la distribution Mandrake Linux. Si, pour une raison ou une\n"
-"autre, vous n'acceptez pas ces conditions, cliquez sur ��Refuser��.\n"
-"L'installation sera alors imm�diatement interrompue. Pour continuer,\n"
-"cliquez sur ��Accepter��."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"� cette �tape, vous devrez d�terminer le niveau de s�curit� requis par\n"
-"votre syst�me. Le niveau de s�curit� requis se d�termine en fonction de\n"
-"l'exposition du syst�me � d'autres utilisateurs (s'il est connect�\n"
-"directement sur Internet par exemple) et selon le niveau de sensibilit� de\n"
-"l'information contenu dans le syst�me (des num�ros de carte de cr�dit par\n"
-"exemple). Sachez que, de mani�re g�n�rale, plus la s�curit� d'un syst�me\n"
-"est �lev�e, plus il est complexe � op�rer. R�f�rez-vous au chapitre\n"
-"��msec�� du ��Manuel de r�f�rence�� pour obtenir plus d'informations sur\n"
-"les niveaux de s�curit�.\n"
-"\n"
-"Si vous ne savez pas quel niveau choisir, gardez la s�lection par d�faut."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"A cette �tape, vous devez choisir quelles partitions seront utilis�es pour\n"
-"l'installation de votre syst�me Mandrake Linux. Si des partitions ont d�j�\n"
-"�t� d�finies, soit par une installation pr�c�dente de GNU/Linux soit grace\n"
-"� un autre outil de partitionnement, vous pouvez les utiliser.\n"
-"Sinon, de nouvelles partitions doivent �tre d�finies.\n"
-"\n"
-"Pour ce faire, vous devez d'abord s�lectionner un disque dur. Vous pouvez\n"
-"ainsi cliquer sur ��hda�� pour choisir le premier disque IDE (primary "
-"master),\n"
-"��hdb�� pour le deuxi�me disque IDE (primary slave), ��sda�� pour le \n"
-"premier disque SCSI, ��sdb�� pour le second, etc.\n"
-"\n"
-"Pour partitionner le disque s�lectionn�, vous pouvez utiliser ces options�:\n"
-"\n"
-"- ��Supprimer toutes les partitions���: efface toutes les partitions du\n"
-"disque choisi. \n"
-"\n"
-"- ��Partitionnement automatique���: cr�e automatiquement les partitions\n"
-"Ext2 et Swap dans l'espace libre du disque. \n"
-"\n"
-"- ��Davantage���: donne acc�s � des fonctionnalit�s suppl�mentaires. \n"
-"\n"
-"- ��Sauvegarder la table des partitions...���: sauve la table des "
-"partitions\n"
-" sur une disquette, ce qui est fortement recommand�. Cela peut �tre\n"
-"tr�s utile pour la restaurer si elle est endommag�e. \n"
-"\n"
-"- ��Charger une table des partitions...���: permet de restaurer une table\n"
-"des partitions � partir d'une disquette.\n"
-"\n"
-"- ��Deviner automatiquement la table des partitions���: si votre table des\n"
-"partitions est endommag�e, vous pouvez essayer de la r�cuperer \n"
-"automatiquement grace � cette option. Soyez prudent et rappelez-vous\n"
-"que cela peut �chouer.\n"
-"\n"
-"- ��Relire la table des partitions���: annule tous les changements et \n"
-"recharge votre table des partitions initiale.\n"
-"\n"
-"- ��Auto-montage des p�riph�riques amovibles���: d�s�lectionner cette\n"
-"option obligera les utilisateurs � monter et d�monter manuellement les\n"
-"p�riph�riques amovibles tels que les disquettes ou c�d�roms.\n"
-"\n"
-"- ��Assistant���: � utiliser si vous n'avez pas une bonne connaissance\n"
-"du partitionnement.\n"
-"\n"
-"- ���tat pr�c�dent���: pour annuler vos derni�res modifications.\n"
-"\n"
-"- ��Passer en mode expert���: permet des actions suppl�mentaires\n"
-"(Type de partition, options, formatage), et donne plus d'informations.\n"
-"\n"
-"- ��Terminer���: enregistre physiquement vos changements sur le disque.\n"
-"\n"
-"Note�: vous pouvez atteindre les options grace au clavier, en utilisant la\n"
-"touche <Tab> et les fl�ches haut/bas.\n"
-"Quand une partition est s�lectionn�e, vous pouvez utiliser�:\n"
-"- <Ctrl-C> pour cr�er une nouvelle partition lorsque une partition vide\n"
-"est s�lectionn�e. \n"
-"- <Ctrl-D> pour effacer une partition. \n"
-"- <Ctrl-M> pour attribuer un point de montage � la partition.\n"
-"\n"
-"Pour obtenir des informations sur les diff�rents syst�mes de fichiers\n"
-"disponibles, vous pouvez lire le chapitre ext2fs du Manuel de R�f�rence.\n"
-"\n"
-"S vous installez une machine � base de PowerPC (Mac), vous devrez\n"
-"cr�er une petite partition d'amor�age (bootstrap) de type HFS d'au moins\n"
-"1 Mo, qui sera utilis� par le programme d'amor�age ��yaboot��. Si vous \n"
-"optez pour une partition un peu plus grande, disons 50 Mo, vous pouvez\n"
-"l'utiliser pour stocker un noyau additionnel et des images ramdisk pour\n"
-" des situations de d�marrage de secours."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Plus d'une partition DOS/Windows ont �t� d�tect�es sur votre disque dur.\n"
-"Veuillez choisir celle que vous d�sirez redimensionner pour installer votre\n"
-"nouveau syst�me d'exploitation Mandrake Linux.\n"
-"\n"
-"Pour information, chaque partition est d�crite comme suit�:\n"
-"��Nom Linux��, ��Nom Windows��, ��Capacit頻.\n"
-"\n"
-"Le champ ��Nom linux �� est cod� comme suit�: ��type du disque dur��,\n"
-"��num�ro du disque dur��, ��num�ro de la partition�� (par exemple,\n"
-"��hda1��).\n"
-"\n"
-"Le champ ��type du disque dur�� est ��hd�� si votre disque dur\n"
-"est un disque dur IDE ou ��sd�� s'il s'agit d'un disque SCSI.\n"
-"\n"
-"Avec un disque dur IDE,\n"
-"   * ��a�� signifie ��disque ma�tre sur le premier port IDE��,\n"
-"   * ��b�� signifie ��disque esclave sur le premier port IDE��,\n"
-"   * ��c�� signifie ��disque ma�tre sur le second port IDE��,\n"
-"   * ��d�� signifie ��disque esclave sur le second port IDE��.\n"
-"\n"
-"Avec un disque dur SCSI, un ��a�� signifie ��premier disque dur��,\n"
-"��b�� signifie ��second disque dur��, etc.�dans l'ordre des IDs SCSI�\n"
-"\n"
-"Le champ ��Nom Windows�� correspond � la lettre identifiant votre disque\n"
-"dur sous DOS/Windows (le premier disque (ou la premi�re partition)\n"
-"est appel� ��C:��)."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Veuillez patienter. Cette op�ration peut prendre plusieurs minutes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX doit maintenant savoir quel type d'installation vous d�sirez\n"
-"r�aliser. Deux types d'installations sont propos�s: Par d�faut (��\n"
-"Recommand�e��), qui limite le nombre de questions � l'utilisateur au\n"
-"minimum ou ��Expert�� qui vous permet de s�lectionner individuellement\n"
-"chacune des composantes � installer. �galement, on vous propose de faire\n"
-"une ��Installation�� ou une ��Mise � jour�� d'un syst�me existant:\n"
-"\n"
-" * ��Installation��: balaye l'ancien syst�me. En fait, selon ce que votre\n"
-"machine comporte, vous pourrez garder intacte certaines des anciennes\n"
-"partition (Linux ou autres);\n"
-"\n"
-" * ��Mise � jour��: cette classe d'installation permet de simplement mettre\n"
-"� jours les paquetages qui composent votre syst�me GNU/Linux. Elle conserve les\n"
-"partitions existantes, ainsi que la configuration des utilisateurs. Toutes\n"
-"les autres �tapes de l'installation sont accessibles en comparaison avec\n"
-"une installation classique;\n"
-"\n"
-" * ��Mise � jour des paquetages uniquement��: Cette nouvelle classe\n"
-"d'installation permet de mettre � jour un syst�me Mandrake Linux existant, tout en gardant\n"
-"sa configuration inchang�e. L'ajout de nouveaux paquetages durant la mise �\n"
-"jour est cependant possible.\n"
-"\n"
-"La mise � jour devrait fonctionner correctement pour les syst�mes Mandrake Linux � partir\n"
-"de la version ��8.1��.\n"
-"\n"
-"Selon votre niveau d'expertise avec les syst�mes d'exploitations GNU/Linux, il faut\n"
-"choisir l'un des deux types d'installations suivants:\n"
-"\n"
-" * ��Recommand�e��: choisissez cette option si vous n'avez jamais install�\n"
-"de syst�me d'exploitation GNU/Linux. C'est la m�thode la plus facile, la plupart des\n"
-"choix ont d�j� �t� fait pour vous.\n"
-"\n"
-" * Expert: si vous avez une bonne connaissance de GNU/Linux, vous pouvez choisir ce\n"
-"type d'installation. Cette m�thode vous permettra de personnaliser\n"
-"l'ensemble des composantes de votre syst�me. Ces questions peuvent s'av�rer\n"
-"complexes, particuli�rement en mati�re de partitionnement et du choix des\n"
-"paquetages install�s. En cons�quence, il n'est pas recommand� de s'y\n"
-"aventurer sans de bonnes connaissances au pr�alable."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalement, DrakX s�lectionne le clavier appropri� en fonction de la\n"
-"langue choisie et vous ne devriez pas voir cette �tape. Cela dit, il est\n"
-"possible que vous ayez un clavier ne correspondant pas exactement � votre\n"
-"langue d'utilisation. Par exemple, si vous habitez le Qu�bec et parlez le\n"
-"fran�ais et l'anglais, vous pouvez vouloir avoir votre clavier anglais pour\n"
-"les t�ches d'administration syst�me et votre clavier fran�ais pour �crire\n"
-"de la po�sie. Dans ces cas, il vous faudra revenir � cette �tape\n"
-"d'installation et s�lectionner un autre clavier � partir de la liste.\n"
-"\n"
-"Vous n'avez qu'a choisir la disposition de clavier qui vous convient.\n"
-"\n"
-"Cliquez sur ��Davantage�� pour voir toutes les options propos�es."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Veuillez choisir votre langue de communication. Celle-ci sera utilis�e\n"
-"durant le processus d'installation, ainsi que durant les mises � jour de\n"
-"votre syst�me.\n"
-"\n"
-"En cliquant sur ��Avanc頻, le programme vous proposera �galement d'autres\n"
-"langues pouvant �tre install�es sur votre station de travail. En\n"
-"choisissant d'autres langues, le programme vous installera toute la\n"
-"documentation et les applications n�cessaires � l'utilisation de cette\n"
-"autre langue. Par exemple, si vous pr�voyez d'accueillir des utilisateurs\n"
-"d'Espagne sur votre serveur, choisissez l'anglais comme langue principale,\n"
-"et, dans la section avanc�e, cliquez sur l'�toile grise correspondant �\n"
-"Spanish|Spain.\n"
-"\n"
-"Sachez que plusieurs langues peuvent �tre install�es. Une fois votre\n"
-"s�lection compl�te termin�e, cliquez sur ��OK�� pour continuer."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"DrakX d�tecte g�n�ralement le nombre de boutons de votre souris. Sinon, il\n"
-"prend pour acquis que vous avez une souris � deux boutons et configurera\n"
-"l'�mulation du troisi�me bouton. �galement, DrakX saura automatiquement si\n"
-"vous avez une souris PS/2, s�rie ou USB.\n"
-"\n"
-"Si vous d�sirez installer une souris diff�rente, veuillez la s�lectionner �\n"
-"partir de la liste qui vous est propos�e.\n"
-"\n"
-"Si vous s�lectionnez une souris diff�rente de celle choisie par d�faut,\n"
-"DrakX vous pr�sentera un �cran de test. Utilisez les boutons et la roue\n"
-"pour vous assurer que tout fonctionne correctement. Si votre souris ne\n"
-"fonctionne pas normalement, appuyer sur la barre d'espacement ou [Entr�e]\n"
-"ou encore ��Annuler��, puis, s�lectionner une autre souris."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Veuillez s�lectionner le bon port. Par exemple, le port ��COM1�� de Windows\n"
-" est appel� ��ttyS0�� sous GNU-Linux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Vous avez � prendre ici une d�cision cruciale pour la s�curit� de votre\n"
-"syst�me. L'utilisateur ��root�� est l'administrateur du syst�me qui a tous\n"
-"les droits d'acc�s aux fichiers de configuration, etc. Il est donc\n"
-"imp�ratif de choisir un mot de passe difficile � deviner (pensez aux\n"
-"syst�mes pr�vus � cet effet qui anticipent les combinaisons communes des\n"
-"utilisateurs). DrakX vous avertira si le mot de passe entr� est trop facile\n"
-"� deviner. Comme vous pouvez le voir, il est �galement possible de ne pas\n"
-"entrer de mot de passe. Nous d�conseillons fortement cette pratique. Comme\n"
-"l'erreur est humaine, un utilisateur avec tous les droits peut tout\n"
-"d�truire sur votre syst�me, c'est pourquoi le mot de passe doit agir comme\n"
-"barri�re � l'entr�e.\n"
-"\n"
-"Le mot de passe choisi devrait contenir au moins 8 caract�res\n"
-"alphanum�riques. Ne jamais �crire un mot de passe, forcez-vous � vous en\n"
-"souvenir par coeur. Il faut donc m�nager accessibilit� et m�moire, donc un\n"
-"mot de passe de 30 caract�res est presque impossible � m�moriser.\n"
-"\n"
-"Afin d'�viter les regards indiscrets, le mot de passe n'appara�tra pas �\n"
-"l'�cran. Il vous faudra donc l'inscrire deux fois afin d'�viter les erreurs\n"
-"de frappe. �videmment, si vous faites deux fois la m�me erreur, celle-ci\n"
-"sera sauvegard�e et vous devrez la reproduire afin d'acc�der � votre\n"
-"syst�me pour la premi�re fois.\n"
-"\n"
-"En mode expert, on vous demandera si vous comptez vous connecter sur un\n"
-"serveur d'authentification, tel que NIS ou LDAP. Si votre r�seau utilise un\n"
-"de ces protocoles, il faut le s�lectionner. Si vous n'en avez aucune id�e,\n"
-"demandez � votre administrateur de r�seau.\n"
-"\n"
-"Si votre ordinateur n'est pas connect� sur un r�seau administr�, vous devez\n"
-"choisir ��Fichiers Locaux�� pour l'authentification."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO et grub sont deux programmes d'amorce pour GNU/Linux. Cette �tape est normalement\n"
-"compl�tement automatique. En fait, DrakX analyse le secteur de d�marrage\n"
-"(master boot record) et agit en fonction de ce qu'il peut y lire:\n"
-"\n"
-" * Si un secteur de d�marrage Windows est d�tect�, il va �tre remplacer par\n"
-"LILO/GRUB. Donc, vous serez capable de d�marrer et tout autre syst�me\n"
-"d'exploitation.\n"
-"\n"
-" * si GRUB ou LILO est d�tect�, il sera remplac� par la nouvelle version;\n"
-"\n"
-"En cas de doute, DrakX affiche diff�rentes options.\n"
-"\n"
-" * ��Programme d'amor�age � utiliser�� vous propose trois choix:\n"
-"\n"
-"    * ��GRUB��: si vous pr�f�rer GRUB (menu texte).\n"
-"\n"
-"    * ��LILO en mode graphique��: si vous pr�f�rez l'interface graphique.\n"
-"\n"
-"    * ��LILO en mode texte��: si vous pr�f�rez la version texte de LILO.\n"
-"\n"
-" * ��P�riph�riques de d�marrage��: dans la plupart des cas, vous n'aurez pas\n"
-"� changer le disque par d�faut (��/dev/hda��, mais si vous le d�sirez, le\n"
-"programme d'amorce peut �tre install� sur un second disque, ��/dev/hdb��,\n"
-"ou m�me sur une disquette, ��/dev/fd0��.\n"
-"\n"
-" * ��D�lais avant l'activation du choix par d�faut��: au red�marrage de\n"
-"l'ordinateur, il s'agit du temps accord� � l'utilisateur pour d�marrer un\n"
-"autre syst�me d'exploitation.\n"
-"\n"
-"!! Prenez garde, si vous d�cidez de ne pas installer de programme d'amorce\n"
-"(en cliquant sur ��Annuler��), vous devez vous assurez d'avoir une m�thode\n"
-"pour d�marrer le syst�me. Aussi, assurez vous de bien savoir ce que vous\n"
-"faites si vous modifiez les options. !!\n"
-"\n"
-"En cliquant sur ��Avanc�e��, vous aurez acc�s � plusieurs autres options de\n"
-"configuration. Sachez que celles-ci sont r�serv�es aux experts en la\n"
-"mati�re.\n"
-"\n"
-"Si vous avez d'autres syst�mes d'exploitation install�s sur votre\n"
-"ordinateur, ils seront automatiquement d�tect�s et ajout � vos menus de\n"
-"d�marrage. � cette �tape, vous pouvez d�cider de pr�ciser ces options. En\n"
-"double-cliquant sur une entr�e existante vous pourrez la param�trer � votre\n"
-"guise, ou l'enlever. ��Ajouter�� permet de cr�er de nouvelles entr�es, et\n"
-"��terminer�� vous conduit � la prochaine �tape d'installation."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) et grub sont des programme d'amorcage: ils sont\n"
-"capables de d�marrer GNU/Linux ou n'importe quel autre syst�me\n"
-"d'exploitation pr�sent sur votre machine.  Normalement, ces autres\n"
-"syst�mes sont cens�s �tre correctement d�tect�s et install�s. Si ce\n"
-"n'est pas le cas, vous pouvez ajouter manuellement une nouvelle entr�e \n"
-"via cet �cran. Veillez � choisir les param�tres corrects.\n"
-"\n"
-"Vous pouvez �galement supprimer l'acc�s � ces autres syst�mes en\n"
-"d�truisant les entr�es correspondantes. Mais vous aurez alors besoin\n"
-"d'une disquette de d�marrage afin de lancer ces autres syst�mes!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Vous devez maintenant choisir o� placer le programme d'amor�age, LILO ou "
-"Grub,\n"
-"n�cessaire au d�marrage de GNU/Linux.\n"
-"\n"
-"� moins de savoir exactement ce que vous faites, choisissez\n"
-"toujours ��Premier secteur du disque (MBR)��."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Il s'agit ici de choisir un gestionnaire d'impression pour votre "
-"ordinateur.\n"
-"Les autres syst�mes peuvent n'en proposer qu'un, Mandrake vous en offre "
-"trois�:\n"
-"\n"
-"��PDQ�� (Print Don't Queue), vous suffira si votre imprimante est\n"
-"reli�e directement � votre ordinateur, et que vous ne voulez pas faire\n"
-"d'impression en r�seau. C'est une solution fiable, s�re, et simple pour un\n"
-"d�butant � GNU/Linux. PDQ peut quand m�me g�rer certains cas simples\n"
-"d'imprimantes en r�seau. Vous pourrez de toute fa�on modifier votre choix\n"
-"apr�s installation en lan�ant PrinterDrake en mode expert.\n"
-"\n"
-"��CUPS�� (Common Unix Printing System) est excellent � la fois pour\n"
-"l'impression locale et l'impression r�seau. Il est simple d'utilisation et "
-"peut\n"
-"agir aussi bien comme serveur que comme client pour l'ancien syst�me\n"
-"d'impression LPD. Il est donc r�tro-compatible. Il peut faire beaucoup de\n"
-"choses, mais la configuration minimale est aussi simple que pour PDQ,\n"
-"et il poss�de une interface graphique pour l'impression et ses options.\n"
-"Si vous avez besoin d'�muler un serveur LPD, vous devez activer le\n"
-"service ��cups-lpd��.\n"
-"\n"
-"��LPRng�� (Line Printer New Generation) fait approximativement\n"
-"la m�me chose que les deux autres, mais il peut en plus imprimer\n"
-"� travers un r�seau Novell Network car il supporte le protocole IPX,\n"
-"et il peut �galement diriger une impression vers une commande shell.\n"
-"Si vous n'avez pas besoin de ces deux fonctionnalit�s, CUPS est\n"
-"pr�f�rable car plus simple, et plus performant pour les r�seaux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX d�tecte maintenant tous les p�riph�riques IDE pr�sents sur votre\n"
-"syst�me. �galement, DrakX recherchera les p�riph�riques SCSI. Finalement,\n"
-"selon les composantes d�tect�es, DrakX installera tous les pilotes\n"
-"n�cessaires � son fonctionnement.\n"
-"\n"
-"Compte tenu de la vaste gamme de p�riph�riques disponibles sur le march�,\n"
-"dans certain cas la d�tection de mat�riel ne fonctionnera pas. Dans ce cas,\n"
-"DrakX vous demandera de confirmer si des composantes SCSI sont pr�sentes\n"
-"sur votre syst�me. Cliquez sur ��Oui�� si vous �tes certain d'avoir un\n"
-"p�riph�rique SCSI sur votre syst�me. DrakX vous pr�sentera alors une liste\n"
-"de carte SCSI disponibles. S�lectionnez la v�tre. �videment, cliquez sur\n"
-"��Non��, si vous n'en avez pas. Si vous n'�tes pas certain, cliquez sur\n"
-"��Voir les informations sur le mat�riel��, puis sur ��OK��. V�rifiez la\n"
-"liste du mat�riel, puis cliquez sur ��OK�� pour retourner � la question\n"
-"concernant les p�riph�riques SCSI.\n"
-"\n"
-"Si vous devez sp�cifier votre carte SCSI manuellement, DrakX vous demandera\n"
-"de confirmer les options du p�riph�rique. Vous devriez permettre � DrakX de\n"
-"v�rifier automatiquement votre carte pour les options n�cessaires �\n"
-"d�terminer.\n"
-"\n"
-"Il peut arriver que DrakX soit incapable de v�rifier les options\n"
-"n�cessaires. Dans ce cas, vous devrez les d�terminer manuellement.\n"
-"Consultez le guide d'utilisation (Chapitre 3, section \"Obtenir des\n"
-"informations sur votre mat�riel\") pour quelques astuces pour retrouver les\n"
-"param�tres n�cessaires dans la documentation de vos p�riph�riques, sur le\n"
-"site du fabricant (si vous avez un acc�s � Internet) ou � partir des menus\n"
-"de Microsoft Windows (si vous utilisiez ce p�riph�rique avec Windows)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Vous pouvez ajouter des entr�es suppl�mentaires dans ��yaboot��, soit\n"
-"pour d�marrer un autre syst�me d'exploitation, soit pour des noyaux de\n"
-"secours.\n"
-"\n"
-"Pour les autres syst�mes, l'entr�e consiste en un label et la partition "
-"racine.\n"
-"\n"
-"Pour Linux, voici les options possibles�:\n"
-"\n"
-"- label�: le nom que vous devrez taper au message d'invite de yaboot pour\n"
-"activer cette option d'amor�age. \n"
-"\n"
-"- racine�: le p�riph�rique racine ou ��/�� pour votre installation Linux. \n"
-"\n"
-"- options pass�es au noyau�: sur les mat�riels Apple, des options sont\n"
-" souvent transmises au noyau pour l'initialisation de la carte graphique,\n"
-"ou pour activer l'�mulation (au clavier) des deux boutons qui manquent\n"
-"souvent aux souris d'Apple. Voici quelques exemples�: \n"
-"\n"
-"        video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-"- Fichier RamDisk�: cette option peut �tre utilis�e pour charger des\n"
-"modules avant que le p�riph�rique d'amor�age ne soit disponible, ou\n"
-"pour charger une image ramdisk pour un d�marrage de secours.\n"
-"\n"
-"- Taille du RamDisk�: la taille par d�faut est g�n�ralement de 4096 octets.\n"
-"Si vous voulez une taille plus grande, utilisez cette option.\n"
-"- Pr�activ� en �criture�: normalement, la partition racine est initialement\n"
-"mont�e en mode lecture seulement, pour v�rifier le syst�me de fichier\n"
-"avant qu'il ne soit activ�. Avec cette option, vous pouvez autoriser la\n"
-"partition racine � �tre mont�e directement en mode �criture.\n"
-"\n"
-"- NoVideo�: si la carte graphique devait poser trop de probl�mes, vous \n"
-"pouvez activer cette option pour d�marrer en mode ��framebuffer�� natif.\n"
-"\n"
-"- Defaut�: s�lectionne cette entr�e comme choix par d�faut, activ� en \n"
-"pressant juste <ENTREE> au message d'invite de ��yaboot��. C'est cette\n"
-"entr�e qui sera alors pr�c�d�e d'un ��*��, si vous pressez <Tab> pour voir\n"
-"la liste des possibilit�s."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"��Yaboot��  est un programme d'amor�age pour les MacIntosh dot�s de\n"
-"l'architecture NewWorld (iMac, G3, G4, PowerBook G3 Series 99, iBook, etc.)\n"
-"Il est capable de faire d�marrer GNU/Linux, MacOS, ou MacOSX, si\n"
-"ces syst�mes sont pr�sents sur votre ordinateur. Normalement, les\n"
-"syst�mes d'exploitation d�j� pr�sents devraient avoir �t� d�tect�s.\n"
-"Si ce n'est pas le cas, vous pouvez ajouter manuellement l'entr�e manquante\n"
-"sur cet �cran. Veuillez faire attention de choisir les bons param�tres.\n"
-"\n"
-"Les principales options de Yaboot sont�:\n"
-"\n"
-"- Message de d�marrage�: un simple texte, affich� avant l'amor�age.\n"
-"\n"
-"- P�riph�rique d'amor�age�: indique o� vous souhaitez installer le\n"
-"programme d'amor�age. G�n�ralement, vous aurez configur� auparavant\n"
-"une partition d'amor�age (bootstrap) pour contenir ces informations.\n"
-"\n"
-"- D�lai de l'OpenFirmware�: � la diff�rence de LILO, il y a deux\n"
-"d�lais disponibles avec Yaboot. Pendant le premier (mesur� en secondes),\n"
-"vous pouvez choisir entre CD, OF, MacOS, et Linux.\n"
-"\n"
-"- D�lai d'amor�age du noyau�: ce d�lai est similaire � celui de\n"
-"LILO. Apr�s avoir s�lectionn� Linux, vous aurez ce d�lai (en dixi�mes\n"
-"de seconde) avant d'accepter les param�tres noyau par d�faut.\n"
-"\n"
-"- Autoriser l'amor�age sur CD�?�: si vous activez cette option, vous\n"
-"pourrez choisir 'C', pour le CD, � la premi�re invite d'amor�age.\n"
-"\n"
-"- Autoriser l'amor�age sur l'OF�?�: si vous activez cette option, vous\n"
-"pourrez choisir 'N' pour l'OpenFirmware � la premi�re invite d'amor�age.\n"
-"\n"
-"- choix par d�faut�: vous pouvez s�lectionner quel syst�me d�marrera par\n"
-"d�faut apr�s expiration du d�lai de l'Open Firmware."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"On vous pr�sente ici les diff�rents param�tres de votre syst�me. Selon le\n"
-"mat�riel install�, certaines entr�es seront pr�sentes et d'autres pas.\n"
-"\n"
-" * ��Souris��: pour v�rifier la configuration actuelle de la souris. "
-"Cliquez\n"
-"sur le bouton pour modifier les options.\n"
-"\n"
-" * ��Clavier��: v�rifie la configuration choisie pour le clavier. Cliquez\n"
-"sur le bouton pour la modifier.\n"
-"\n"
-" * ��Fuseau horaire��: DrakX, par d�faut, essaie de trouver le fuseau\n"
-"horaire dans lequel vous �tes. Encore une fois, il est possible que vous ne\n"
-"soyez pas dans le fuseau horaire qui vous convient. Donc, vous aurez\n"
-"peut-�tre � cliquer sur le bouton ��fuseau horaire�� pour identifier\n"
-"pr�cis�ment l'heure qui doit appara�tre dans vos horloges.\n"
-"\n"
-" * ��Imprimante��: en cliquant sur ��Pas d'imprimante��, l'outil de\n"
-"configuration sera d�marr�.\n"
-"\n"
-" * ��Carte son��: si une carte son a �t� d�tect�e, elle appara�tra ici.\n"
-"Aucune modification n'est possible � cette �tape.\n"
-"\n"
-" * ��Carte TV��: si une carte d'entr�e/sortie vid�o (carte TV) a �t�\n"
-"d�tect�e, elle appara�tra ici. Aucune modification possible � cette �tape.\n"
-"\n"
-" * ��Carte ISDN��: si une carte ISDN est d�tect�e, elle appara�tra ici. "
-"Vous\n"
-"pouvez cliquer sur le bouton pour en modifier les param�tres."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Choisissez le disque dur que vous souhaitez effacer pour installer votre\n"
-"nouvelle partition Mandrake Linux. Soyez prudent, toutes les donn�es\n"
-"pr�sentes sur ce disque seront perdues et ne seront pas r�cup�rables�!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Cliquez sur ��OK�� seulement si vous d�sirez supprimer toutes les donn�es\n"
-"et partitions pr�sentes sur ce disque dur. Soyez prudent. Apr�s avoir "
-"cliqu�\n"
-"sur ��OK��, vous n'aurez aucun moyen de r�cup�rer ces donn�es et\n"
-"partitions, y compris celles de Windows."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Impossible d'acc�der aux modules correspondant � votre noyau (le fichier %s "
-"est manquant), cela veut g�n�ralement dire que votre disquette de boot est "
-"d�synchronis�e par rapport � votre medium d'Installation (veuillez cr�er une "
-"disquette de boot plus r�cente)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Vous devez aussi formater %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Vous avez s�lectionn� le(s) serveur(s) suivant(s)�: %s\n"
-"\n"
-"\n"
-"Ces serveurs seront activ�s par d�faut. Ils n'ont pas de trou\n"
-"de s�curit� connu, mais de nouveaux probl�mes peuvent �tre\n"
-"d�couverts par la suite. Dans ce cas, vous devrez vous assurer\n"
-"de mettre � jour vos serveurs le plus rapidement possible.\n"
-"\n"
-"\n"
-"Confirmez vous l'installation de ces serveurs�?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "On ne peut pas utiliser l'option broadcast sans domaine NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ins�rez une disquette format�e en FAT (format DOS/Windows) %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Cette disquette n'est pas au format DOS/Windows"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Pour utiliser cette sauvegarde de s�lection des paquetages, veuillez "
-"red�marrer l'installation avec la commande ��linux defcfg=floppy��."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erreur lors de la lecture du fichier %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Certains p�riph�riques pr�sents sur votre syst�me n�cessitent des pilotes\n"
-"��propri�taires�� pour pouvoir fonctionner. Vous pouvez trouver plus\n"
-"d'informations les concernant ici�: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Vous devez avoir une partition racine.\n"
-"Pour la d�finir, cr�ez une partition (ou choisissez-en une d�j�\n"
-"existante) puis cliquez sur ��Point de montage�� et choisissez ��/��."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Vous devez cr�er une partition d'�change (swap)"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Vous n'avez pas de partition d'�change (swap).\n"
-"\n"
-"D�sirez-vous tout de m�me continuer�?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Vous devez disposer d'une partition FAT mont�e en /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Utiliser l'espace libre"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Pas assez d'espace libre pour cr�er de nouvelles partitions"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Utiliser une partition existante"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Pas de partition existante � utiliser"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Utiliser la partition Windows pour le loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Quelle partition d�sirez-vous utiliser pour Linux4Win�?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Choix des tailles"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Taille de la partition racine en Mo�: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Taille de la partition d'�change (swap) en Mo�: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Utiliser l'espace libre sur la partition de Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Quelle partition d�sirez-vous redimensionner�?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Calcul des limites du syst�me de fichiers de Windows en cours"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Le programme de redimensionnement des partitions FAT ne peut g�rer votre\n"
-"partition. L'erreur suivante est survenue�: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Votre partition FAT est trop fragment�e. Red�marrez sous Windows\n"
-"et lancez le programme de d�fragmentation ��defrag��,\n"
-"puis relancez l'installation de Mandrake Linux."
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATTENTION�!\n"
-"\n"
-"La taille de votre partition Windows va maintenant �tre r�duite.\n"
-"\n"
-"Soyez prudent�: cette op�ration est dangereuse. Si ce n'est pas d�j�\n"
-"fait, vous devriez tout d'abord sauvegarder vos donn�es et lancer les\n"
-"programmes ��scandisk�� et ��defrag�� (fournis avec Windows)\n"
-"sur cette partition.\n"
-"\n"
-"Si vous �tes s�r de vous, cliquez sur OK."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Quelle taille d�sirez-vous allouer � Windows�?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partition %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Le redimensionnement de la partition FAT a �chou�: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Il n'y a aucune partition FAT � redimensionner ou � utiliser en tant que "
-"loopback (ou trop peu d'espace est disponible)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Effacer tout le disque"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Supprimer Microsoft Windows"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Vous poss�dez plus d'un disque dur.\n"
-"Sur lequel d�sirez vous installer Linux�?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"TOUTES les partitions et les donn�es pr�sentes sur le disque %s seront "
-"perdues"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Partitionnement personnalis�"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Utiliser fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Vous pouvez maintenant partitionner %s.\n"
-"\n"
-"Lorsque vous aurez termin�, n'oubliez pas d'enregistrer vos\n"
-"modifications en appuyant sur la touche ��w��."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Utiliser l'espace libre sur la partition de Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Pas de place disponible pour l'installation"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"L'assistant de partitionnement de DrakX\n"
-"a trouv� les solutions suivantes�:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Le partitionnement a �chou�: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "D�marrage de l'interface r�seau"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Arr�t de l'interface r�seau"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Une erreur est survenue et semble difficile � r�soudre correctement.\n"
-"Vous pouvez continuer, mais � vos risques et p�rils."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Point de montage en double�: %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Quelques paquetages importants n'ont pas �t� correctement install�s. Il se\n"
-"peut que le lecteur de c�d�rom ou le c�d�rom lui-m�me soit d�fectueux. Vous\n"
-"pouvez vous assurer du bon �tat de ce dernier en ex�cutant la commande "
-"suivante\n"
-"sur un ordinateur fonctionnant correctement�: ��rmp -qpl Mandrake/RPMS/*."
-"rpm��\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bienvenue sur %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Aucun lecteur de disquette disponible"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "D�marrage de l'�tape ��%s��\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Votre ordinateur poss�de peu de m�moire. Vous aurez peut-�tre quelques\n"
-"probl�mes pour installer Mandrake Linux. Si cela se produit, vous pouvez\n"
-"essayer de proc�der � une installation en mode texte. Pour cela, appuyez\n"
-"sur la touche ��F1�� apr�s l'amor�age sur c�d�rom puis entrez ��text��."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Classe d'installation"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Veuillez choisir une des classes d'installation ci-dessous�:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"La taille totale pour les groupes s�lectionn�s est approximativement de %d "
-"Mo.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Si vous voulez r�duire la taille de votre installation,\n"
-"choisissez le pourcentage de paquetages que vous souhaitez installer.\n"
-"\n"
-"Un faible pourcentage ne conservera que les paquetages les plus importants.\n"
-"Un pourcentage de 100%% installera tous les paquetages s�lectionn�s."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Vous n'avez d'espace sur votre disque que pour %d%% de ces paquetages.\n"
-"\n"
-"Si vous souhaitez r�duire encore la taille de l'installation,\n"
-"choisissez un pourcentage encore plus faible.\n"
-"\n"
-"Un faible pourcentage ne conserve que les paquetages les plus importants.\n"
-"Un pourcentage de %d%% installera le maximum possible de packages."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-"Vous pourrez affiner la s�lection des paquetages lors de la prochaine �tape."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Pourcentage de paquetages � installer"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "S�lection des groupes de paquetages"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "S�lection individuelle des paquetages"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Taille totale�: %d / %d Mo"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Mauvais paquetage"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nom�: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Version�: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Taille�: %d Ko\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importance�: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Il n'y a pas assez de place pour installer ce paquetage"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Les paquetages suivants vont �tre install�s"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Les paquetages suivants vont �tre d�sinstall�s"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Vous ne pouvez pas s�lectionner/d�s�lectionner ce paquetage"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ce paquetage est n�cessaire, vous ne pouvez pas l'enlever."
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Vous ne pouvez pas d�s�lectionner ce paquetage. Il est d�j� install�."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ce paquetage doit �tre mis � jour.\n"
-"�tes-vous certain de vouloir le d�s�lectionner�?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-"Vous ne pouvez pas d�s�lectionner ce paquetage, il doit �tre mis � jour."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Montrer les paquetages s�lectionn�s automatiquement"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installation"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Charger/Sauver sur disquette"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Mise-�-jour de la s�lection des paquetages"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Installation minimale"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Choisissez les paquetages que vous voulez installer"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Installation"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Estimation en cours"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Temps restant "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Veuillez patienter, pr�paration de l'installation..."
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paquetages"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installation du paquetage %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Accepter"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Refuser"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"--Changement de c�d�rom--\n"
-"\n"
-"Veuillez ins�rer le c�d�rom nomm� ��%s��,\n"
-"puis cliquez sur ��OK��.\n"
-"\n"
-"Si vous ne le poss�dez pas, cliquez sur ��Annuler��."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Souhaitez-vous tout de m�me continuer�?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Erreur lors du tri des paquetages�:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Erreur lors de l'installation du paquetage�:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Important\n"
-"\n"
-"Veuillez lire attentivement le pr�sent document. En cas de d�saccord \n"
-"avec l'un de ses termes vous n'�tes pas autoris� � installer les c�d�roms\n"
-"suivants. Dans ce cas, Cliquez sur ��Refuser�� pour continuer \n"
-"l'installation sans ces m�dias.\n"
-"\n"
-"Certains composants logiciels contenus dans les prochains c�d�roms \n"
-"ne sont pas soumis aux licences GPL ou similaires permettant la copie, \n"
-"la modification ou la redistribution. Chacun de ces composants logiciels \n"
-"est distribu� sous les termes et conditions d'un accord de licence qui \n"
-"lui est propre. Veuillez vous y r�f�rer et vous y soumettre avant de les \n"
-"installer ou de les redistribuer. G�n�ralement, ces licences n'autorisent\n"
-"pas la copie (autre qu'� titre de sauvegarde), la redistribution, \n"
-"la d�compilation, la d�sassemblage, l'ing�nierie inverse ni la modification "
-"des\n"
-"Logiciels auxquels elles s'appliquent. Toute violation d'un des termes de la "
-"licence applicable entra�ne g�n�ralement sa\n"
-"r�siliation, sans pr�judice de tous autres droits ou actions � votre "
-"encontre.\n"
-"� moins que l'accord de licence ne vous l'y autorise, vous ne pouvez pas \n"
-"installer ces Logiciels sur plus d'une machine ni adapter les Logiciels \n"
-"pour une utilisation en r�seau. Le cas �ch�ant, veuillez contacter le \n"
-"distributeur du programme pour acqu�rir des licences additionnelles.\n"
-"La distribution � des tiers de copies des Logiciels ou de la documentation\n"
-"qui les accompagne est g�n�ralement interdite.\n"
-"\n"
-"Tous les droits, titres et int�r�t de ces Logiciels sont la propri�t� \n"
-"exclusive de leurs auteurs respectifs et sont prot�g�s au titre des \n"
-"droits de propri�t� intellectuelle et de copyright applicables aux "
-"logiciels.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Une erreur est survenue"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "D�sirez-vous vraiment quitter l'installation?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licence"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"Le syst�me d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux sont ci-apr�s d�nomm�s les ��Logiciels��.\n"
-"Les Logiciels comprennent notamment, mais de fa�on non limitative,\n"
-"l'ensemble des programmes, proc�d�s, r�gles et documentations \n"
-"relatifs au syst�me d'exploitation et aux divers composants de la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licence\n"
-"\n"
-"Veuillez lire attentivement le pr�sent document. Ce document constitue \n"
-"un contrat de licence entre vous (personne physique ou personne morale) et \n"
-"MandrakeSoft S.A. portant sur les Logiciels.\n"
-"Le fait d'installer, de reproduire ou d'utiliser les Logiciels de quelque \n"
-"mani�re que ce soit indique que vous reconnaissez avoir pr�alablement eu \n"
-"connaissance et que vous acceptez de vous conformer aux termes et "
-"conditions \n"
-"du pr�sent contrat de licence. En cas de d�saccord avec le pr�sent "
-"document \n"
-"vous n'�tes pas autoris� � installer, reproduire et utiliser de quelque \n"
-"mani�re que ce soit ce produit.\n"
-"Le contrat de licence sera r�sili� automatiquement et sans pr�avis dans le \n"
-"cas o� vous ne vous conformeriez pas aux dispositions du pr�sent document. \n"
-"En cas de r�siliation vous devrez imm�diatement d�truire tout exemplaire "
-"et \n"
-"toute copie de tous programmes et de toutes documentations qui constituent \n"
-"le syst�me d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"2. Garantie et limitations de garantie\n"
-"\n"
-"Les Logiciels et la documentation qui les accompagne sont fournis en "
-"l'�tat \n"
-"et sans aucune garantie. MandrakeSoft S.A. d�cline toute responsabilit� \n"
-"d�coulant d'un dommage direct, sp�cial, indirect ou accessoire, de quelque \n"
-"nature que ce soit, en relation avec l'utilisation des Logiciels, "
-"notamment \n"
-"et de fa�on non limitative, tout dommage entra�n� par les pertes de \n"
-"b�n�fices, interruptions d'activit�, pertes d'informations commerciales ou \n"
-"autres pertes p�cuniaires, ainsi que des �ventuelles condamnations et \n"
-"indemnit�s devant �tre vers�es par suite d'une d�cision de justice, et ce \n"
-"m�me si MandrakeSoft S.A. a �t� inform�e de la survenue ou de \n"
-"l'�ventualit� de tels dommages.\n"
-"\n"
-"AVERTISSEMENT QUANT � LA D�TENTION OU L'UTILISATION DE LOGICIELS \n"
-"PROHIB�S DANS CERTAINS PAYS \n"
-"\n"
-"En aucun cas, ni MandrakeSoft S.A. ni ses fournisseurs ne pourront �tre \n"
-"tenus responsable � raison d'un pr�judice sp�cial, direct, indirect ou \n"
-"accessoire, de quelque nature que ce soit (notamment et de fa�on non \n"
-"limitative les pertes de b�n�fices, interruptions d'activit�, pertes \n"
-"d'informations commerciales ou autres pertes p�cuniaires, ainsi que \n"
-"des �ventuelles condamnations et indemnit�s devant �tre vers�es par suite \n"
-"d'une d�cision de justice) qui ferait suite � l'utilisation, la d�tention \n"
-"ou au simple t�l�chargement depuis l'un des sites de t�l�chargement de \n"
-"Mandrake Linux de logiciels prohib�s par la l�gislation � laquelle vous \n"
-"�tes soumis. Cet avertissement concerne notamment certains logiciels de \n"
-"cryptographie fournis avec les Logiciels.\n"
-"\n"
-"\n"
-"3. Licence GPL et autres licences\n"
-"\n"
-"Les Logiciels sont constitu�s de modules logiciels cr��s par diverses \n"
-"personnes (physiques ou morales). Nombre d'entre eux sont distribu�s sous \n"
-"les termes de la Licence Publique G�n�rale GNU (ci-apr�s d�nomm�e ��GPL��)\n"
-"ou d'autres licences similaires. La plupart de ces licences vous "
-"permettent \n"
-"de copier, d'adapter ou de redistribuer les modules logiciels qu'elles \n"
-"r�gissent. Veuillez lire et agr�er les termes et conditions des licences \n"
-"accompagnant chacun d'entre eux avant de les utiliser. Toute question \n"
-"concernant la licence d'un Logiciel est � soumettre � l'auteur (ou � ses\n"
-"repr�sentants) du Logiciel et non � MandrakeSoft. \n"
-"Les programmes con�us par MandrakeSoft sont r�gis par la licence GPL. \n"
-"La documentation r�dig�e par MandrakeSoft fait l'objet d'une licence \n"
-"sp�cifique. Veuillez vous r�f�rez � la documentation pour obtenir plus \n"
-"de pr�cisions.\n"
-"\n"
-"\n"
-"4. Propri�t� intellectuelle\n"
-"\n"
-"Tous les droits, titres et int�r�ts des diff�rents Logiciels sont la \n"
-"propri�t� exclusive de leurs auteurs respectifs et sont prot�g�s au titre \n"
-"des droits de propri�t� intellectuelle et de copyright applicables aux "
-"Logiciels.\n"
-"Les marques \"Mandrake\" et \"Mandrake Linux\" ainsi que les \n"
-"logotypes associ�s sont d�pos�s par MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Dispositions diverses\n"
-"\n"
-"Si une disposition de ce contrat de licence devait �tre d�clar�e nulle, \n"
-"ill�gale ou inapplicable par un tribunal comp�tent, cette disposition sera \n"
-"exclue du pr�sent contrat. Vous continuerez � �tre li�s aux autres \n"
-"dispositions, qui recevront leurs pleins effets. Le contrat de licence \n"
-"est soumis � la Loi fran�aise. Toute contestation relative aux pr�sentes \n"
-"dispositions sera r�gl�e pr�alablement par voie amiable. A d�faut d'accord\n"
-"avec MandrakeSoft S.A., les tribunaux comp�tents de Paris seront saisis du \n"
-"litige. Pour toute question relative au pr�sent document, veuillez \n"
-"contacter MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Clavier"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Veuillez choisir votre type de clavier."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Voici la liste compl�te des claviers disponibles"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Quelle classe d'installation d�sirez-vous utiliser�?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installation/Mise-�-jour"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "D�sirez-vous faire une installation ou une mise-�-jour�?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recommand�e"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Mise-�-jour"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Mise-�-jour seulement des paquetages"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Veuillez choisir le type de votre souris."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port souris"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Veuillez choisir le port s�rie sur lequel votre souris est connect�e."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "�mulation des boutons"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "�mulation du bouton 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "�mulation du bouton 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Configuration des cartes PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Configuration IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "Aucune partition disponible"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Examen des partitions afin d'identifier les points de montage"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Choix des points de montage"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"La table des partitions ne peut �tre lue car elle est trop endommag�e.\n"
-"Il est possible de r�initialiser les partitions endommag�es (TOUTES LES\n"
-"DONN�ES seront perdues). Une autre solution consiste � ne pas autoriser\n"
-"le logiciel DrakX � modifier la table des partitions (l'erreur est %s)\n"
-"\n"
-"�tes-vous d'accord pour perdre toutes vos partitions�?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ne peut pas lire la table des partitions de fa�on satisfaisante.\n"
-"Vous pouvez continuer, mais � vos risques et p�rils."
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Pas de place libre pour la partition d'amor�age (bootstrap) de 1 Mo."
-"L'installation va\n"
-"continuer, mais pour que votre syst�me puisse d�marrer, vous aurez besoin "
-"de\n"
-"cr�er la partition d'amor�age avec DiskDrake."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-"Impossible de trouver une partition racine pour proc�der � une mise � jour."
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partition racine"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Quelle est la partition racine (/) de votre syst�me�?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Vous devez red�marrer pour que les modifications apport�es � la\n"
-"table des partitions soient prises en compte"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "S�lectionnez les partitions que vous souhaitez formater"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "V�rifier la pr�sence de secteurs endommag�s�?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatage des partitions"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Cr�ation et formatage du fichier %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Le swap est insuffisant pour achever l'installation, veuillez en ajouter."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Recherche des paquetages disponibles..."
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Recherche des paquetages � mettre � jour..."
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Votre syst�me ne dispose pas d'assez d'espace libre pour l'installation ou "
-"la mise-�-jour (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Compl�te (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimale (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recommand�e (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vous avez le choix entre�:\n"
-"- Sauver sur disquette la s�lection des paquetages.\n"
-"- �tablir un nouveau choix de s�lection � partir d'une sauvegarde sur "
-"disquette.\n"
-"Le format est le m�me que celui des disquettes g�n�r�es pour l'installation "
-"automatis�e."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Charger � partir d'une disquette..."
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Chargement depuis la disquette..."
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "S�lection des paquetages"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Ins�rez une disquette contenant une s�lection de paquetages."
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Sauvegarder sur disquette..."
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "La taille s�lectionn�e est plus importante que la place disponible"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Type d'installation"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Vous n'avez s�lectionn� aucun groupe de paquetages\n"
-"Veuillez choisir l'installation minimale voulue."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Avec X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Avec la documentation de base (recommand�!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Installation vraiment minimale (et en particulier pas d'urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si vous poss�dez tous les c�d�roms ci-dessous, cliquez sur ��OK��.\n"
-"Si vous n'en poss�dez aucun, cliquez sur ��Annuler��.\n"
-"Sinon d�s�lectionnez ceux que vous n'avez pas, puis cliquez sur ��OK��."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "c�d�rom ��%s��"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Pr�paration de l'installation"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installation du paquetage %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configuration post-installation"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ins�rez la disquette d'amor�age utilis�e dans le lecteur %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ins�rez la disquette de mise-�-jour de modules dans le lecteur %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Vous avez maintenant la possibilit� de t�l�charger des paquetages contenant "
-"des logiciels faisant usage de cryptographie si votre connexion internet est "
-"correctement configur�e.\n"
-"\n"
-"\n"
-"ATTENTION�: EN RAISON DE LA DIVERSIT� DES R�GLEMENTATIONS CONCERNANT CES "
-"LOGICIELS, VOUS DEVEZ VOUS ASSURER QUE LES LOIS ET R�GLEMENTS AUXQUELS VOUS "
-"�TES SOUMIS VOUS AUTORISENT � LES T�L�CHARGER, LES STOCKER ET/OU LES "
-"UTILISER.\n"
-"\n"
-"\n"
-"NOUS ATTIRONS TOUT PARTICULI�REMENT VOTRE ATTENTION SUR LE RESPECT DE LA "
-"R�GLEMENTATION EN VIGUEUR DANS VOTRE PAYS. VOUS VOUS EXPOSEZ � DE GRAVES "
-"SANCTIONS EN CAS DE VIOLATION DESDITES R�GLES.\n"
-"\n"
-"\n"
-"EN AUCUN CAS, NI MANDRAKESOFT NI SES FOURNISSEURS NE POURRONT �TRE TENUS "
-"RESPONSABLES � RAISON D'UN PR�JUDICE SP�CIAL, INDIRECT OU ACCESSOIRE, DE "
-"QUELQUE NATURE QUE CE SOIT (NOTAMMENT LES PERTES DE B�N�FICES, INTERRUPTIONS "
-"D'ACTIVIT�, PERTES D'INFORMATIONS COMMERCIALES OU AUTRES PERTES P�CUNIAIRES, "
-"AINSI QUE DES �VENTUELLES CONDAMNATIONS ET INDEMNIT�S DEVANT �TRE VERS�ES "
-"PAR SUITE D'UNE D�CISION DE JUSTICE) QUI FERAIT SUITE � L'UTILISATION, LA "
-"D�TENTION OU AU SIMPLE T�L�CHARGEMENT DES LOGICIELS DE CRYPTOGRAPHIE "
-"AUXQUELS VOUS POURREZ �VENTUELLEMENT ACC�DER APR�S AVOIR VALID� LE PR�SENT "
-"ACCORD.\n"
-"\n"
-"\n"
-"Si vous r�sidez en France, le pr�sent accord est soumis � loi fran�aise. Si "
-"vous r�sidez hors de France, le droit local pourra, le cas �ch�ant, "
-"s'appliquer.\n"
-"\n"
-"\n"
-"Au cas o� vous auriez des questions concernant cet accord, veuillez vous "
-"mettre en relation avec�:\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Vous avez maintenant la possibilit� de t�l�charger les mises � jour\n"
-"cr��es depuis la sortie de cette version de Mandrake Linux.\n"
-"\n"
-"Il s'agit de correctifs de s�curit�, ou de correction de bogues,\n"
-"et vous aurez besoin d'une connexion internet pour les obtenir.\n"
-"\n"
-"Voulez-vous installer les mises-�-jour�?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Connexion au site web de Mandrake Linux pour obtenir la liste des serveurs "
-"miroirs disponibles..."
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Choisissez un serveur miroir d'o� t�l�charger les paquetages"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "T�l�chargement de la liste des paquetages disponibles..."
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Quelle est votre fuseau horaire�?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Horloge syst�me r�gl�e sur le Temps Universel (GMT)"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Synchronisation automatique de l'horloge (via NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Serveur NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Serveur CUPS distant"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Pas d'imprimante"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Poss�dez-vous une carte son ISA�?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Lancez ��sndconfig�� apr�s l'installation pour configurer la carte son"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Aucune carte son detect�e. Essayez avec ��harddrake�� apr�s l'installation"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "R�sum�"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Souris"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Fuseau horaire"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Imprimante"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Carte RNIS/ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Carte son"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Carte TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Fichiers locaux"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Mot de passe root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Pas de mot de passe"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ce mot de passe est trop court (minimum %d caract�res)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Authentification"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Authentification LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "Racine (dn) LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Serveur LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Authentification NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Domaine NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Serveur NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Une disquette d'amor�age permet de lancer votre syst�me Linux\n"
-"sans utiliser le programme d'amor�age du disque dur.\n"
-"\n"
-"C'est utile si vous ne voulez pas installer SILO sur votre syst�me,\n"
-"si un autre syst�me d'exploitation supprime le programme d'amor�age, ou "
-"encore\n"
-"si ce dernier ne peut �tre install� sur votre machine.\n"
-"\n"
-"Vous pouvez �galement utiliser cette disquette avec l'image de secours "
-"Mandrake.\n"
-"Cela permet une r�cup�ration plus ais�e du syst�me en cas de probl�mes "
-"majeurs.\n"
-"\n"
-"Si vous voulez cr�er une disquette d'amor�age pour votre syst�me, ins�rez \n"
-"une disquette dans le premier lecteur et appuyer sur \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Premier lecteur de disquette"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Second lecteur de disquette"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Abandonner"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Une disquette d'amor�age permet de lancer votre syst�me Linux\n"
-"sans utiliser le programme d'amor�age du disque dur.\n"
-"\n"
-"C'est utile si vous ne voulez pas installer LILO sur votre syst�me,\n"
-"si un autre syst�me d'exploitation supprime le programme d'amor�age, ou "
-"encore\n"
-"si ce dernier ne peut �tre install� sur votre machine.\n"
-"\n"
-"Vous pouvez �galement utiliser cette disquette avec l'image de secours "
-"Mandrake.\n"
-"Cela permet une r�cup�ration plus ais�e du syst�me en cas de probl�mes "
-"majeurs.\n"
-"\n"
-"D�sirez-vous cr�er une disquette d'amor�age pour votre syst�me�?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(ATTENTION�! Vous utilisez XFS pour votre partition racine,\n"
-"cr�er une disquette de boot 1.44 Mb va probablement �chouer,\n"
-"parce que XFS a besoin d'un pilote tr�s gros)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "D�sol�, aucun lecteur de disquette ne semble disponible"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Choisissez le lecteur de disquette � utiliser pour\n"
-"cr�er votre disquette d'amor�age."
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ins�rez une disquette dans le %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Cr�ation de la disquette d'amor�age..."
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Pr�paration du programme d'amor�age..."
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Il semble que votre machine ne soit pas dot�e de l'architecture ��NewWorld "
-"�.\n"
-"Le programme d'amor�age ��yaboot�� ne fonctionnera pas.\n"
-"L'installation va continuer, mais vous aurez besoin de ��BootX�� pour "
-"d�marrer\n"
-"votre machine."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "D�sirez-vous utiliser ��aboot���?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Une erreur est survenue lors de l'installation de ��aboot��.\n"
-"D�sirez-vous forcer l'installation au risque de d�truire la\n"
-"premi�re partition du disque�?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Installation du programme d'amor�age..."
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"L'installation du programme d'amor�age a �chou� pour la raison suivante�:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Vous aurez peut-�tre besoin de changer le p�riph�rique d'amor�age\n"
-"de l'OpenFirmware pour activer le programme d'amor�age. Si vous\n"
-"ne voyez pas appara�tre l'invite du programme d'amor�age lorsque\n"
-"vous red�marrerez, appuyez sur Command-Option-O-F au d�marrage et\n"
-"entrez�:\n"
-"setenv boot-device %s,\\\\:tbxi\n"
-"Puis tapez�: shut-down\n"
-"Au prochain d�marrage vous devriez voir appara�tre l'invite du\n"
-"programme d'amor�age."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ins�rez une disquette vierge dans le lecteur %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Cr�ation de la disquette d'auto-installation..."
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Certaines �tapes ne sont pas termin�es.\n"
-"\n"
-"Voulez-vous vraiment quitter maintenant�?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"F�licitations, l'installation est termin�e.\n"
-"Enlevez la disquette ou le c�d�rom d'amor�age et appuyez sur ��Entr�e��.\n"
-"\n"
-"\n"
-"Pour toutes informations sur les corrections disponibles pour cette version "
-"de Mandrake Linux, consultez les Errata disponibles depuis�:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Des informations sur la configuration de votre syst�me sont \n"
-"disponibles dans le Guide de l'Utilisateur de Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Cr�er une disquette d'auto-installation"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"L'auto-installation peut �tre compl�tement automatique si n�cessaire,\n"
-"dans ce cas elle prend le contr�le du disque dur�!!\n"
-"(pr�vu pour l'installation d'une autre machine).\n"
-"\n"
-"Vous pouvez pr�f�rer rejouer l'installation.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatis�e"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Rejouer"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Sauvegarder la s�lection des paquetages..."
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Installation de Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"<Tab> suivant | <Alt-Tab> pr�c�dent | <Espace> s�lectionner | <F12> �cran "
-"suivant "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "le programme ��kdesu�� est introuvable"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "le programme ��consolehelper�� est introuvable"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Choisissez un fichier"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avanc�"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Basique"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Veuillez patienter"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Information"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "D�velopper l'arborescence"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "R�duire l'arborescence"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Basculer entre tri alphab�tique et tri par groupes"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Choix erron�. Veuillez recommencer\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Que choisissez-vous�? (%s par d�faut) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Champs que vous devrez remplir�:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Votre choix�? (0/1, d�faut ��%s��)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Bouton ��%s���: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "D�sirez-vous cliquer sur ce bouton�?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Que choisissez-vous�? (��%s��%s par d�faut) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Il y a beaucoup de choses � choisir (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Veuillez choisir le premier nombre du groupe de 10 que vous\n"
-"souhaitez modifier, ou appuyez juste sur <Entr�e> pour continuer.\n"
-"Votre choix�? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Notez qu'un message a chang�:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Revalider"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "tch�que (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "allemand"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak standard"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "espagnol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "finlandais"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "fran�ais"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "norv�gien"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "polonais"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "russe"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "su�dois"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "anglais"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "am�ricain (�tats-Unis)"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "albanais"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "arm�nien (ancien)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "arm�nien (machine � �crire)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "arm�nien (phon�tique)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "azerba�djanais (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "belge"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "bulgare (phon�tique)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "bulgare (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "br�silien"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "bl�lorusse"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "suisse (allemand)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "suisse (fran�ais)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "tch�que (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "allemand (sans touches mortes)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "danois"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak am�ricain"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak norv�gien"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak su�dois"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "estonien"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "g�orgien (disposition russe)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "g�orgien (disposition latine)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "grec"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "hongrois"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "croate"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "isra�lien"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "isra�lien (phon�tique)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "iranien"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "islandais"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "italien"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "japonais 106 touches"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "cor�en"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "latino-am�ricain"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "lituanien (AZERTY, ancien mod�le)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "lituanien (AZERTY, nouveau mod�le)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "lituanien ��ligne de nombres�� QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "lituanien ��phon�tique�� QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "letton"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "mac�donien"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "hollandais"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "polonais (QWERTY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "polonais (QWERTZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "portugais"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "canadien (Qu�bec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "roumain (QWERTZ)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "roumain (QWERTY)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "russe (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "slov�nien"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "slovaque (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "slovaque (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "serbe (cyrillique)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "tamoul"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "tha�landais"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "tadjik"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "turc (mod�le traditionnel ��F��)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "turc (mod�le moderne ��Q��)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "ukrainien"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "am�ricain (international)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "vietnamien ��colonne num�rique�� QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "yougoslave (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Touche Alt droite"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Deux touches Shift simultan�ment"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Touches Control et Shift simultan�ment"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Touche CapsLock (verrouillage majuscule)"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Touches Ctrl et Alt simultan�ment"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Touches Alt et Shift simultan�ment"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Touche ��Menu��"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Touche ��Windows�� gauche"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Touche ��Windows�� droite"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Points de montage circulaires %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Enlevez d'abord les volumes logiques\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Le support du PCMCIA n'est plus disponible avec les noyaux 2.2. Veuillez "
-"utiliser un noyau 2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Souris SUN"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Souris standard PS2 � molette"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 bouton"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Souris standard � 2 boutons"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "G�n�rique"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Roulette"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "s�rie"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Souris standard � 3 boutons"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Souris Logitech (s�rie, ancien mod�le C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "souris bus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 boutons"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 boutons"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "aucun"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Pas de souris"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Veuillez tester votre souris"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Pour activer la souris,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "veuillez faire tourner la molette"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Terminer"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Suivant ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Pr�c�dent"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Est-ce correct�?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Connexion � l'internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La fa�on la plus courante de se connecter � l'internet en utilisant\n"
-"une ligne ADSL est d'utiliser ��pppoe��.\n"
-"\n"
-"Certaines connexions utilisent ��pptp��, quelques unes se servent de ��DHCP "
-"�.\n"
-"\n"
-"Si vous ne savez pas quoi choisir, utilisez pppoe."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "utiliser ��dhcp��"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "utiliser ��pppoe��"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "utiliser ��pptp��"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Quel client DHCP d�sirez-vous utiliser�?\n"
-"\n"
-"Le client par d�faut est ��dhcpcd��."
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Aucune carte r�seau n'a �t� d�tect�e sur votre syst�me.\n"
-"La connexion ne peut donc pas �tre configur�e."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Choisissez la carte r�seau"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Veuillez choisir la carte r�seau qui sera connect�e � l'internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Aucune carte r�seau n'a �t� identifi�e"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Configuration du r�seau"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Veuillez indiquer le nom d'h�te de votre machine si vous le connaissez.\n"
-"Certains serveurs DHCP ont besoin de ce nom d'h�te pour fonctionner.\n"
-"Celui-ci doit �tre pleinenement qualifi�, comme par exemple�:\n"
-"mamachine.monlabo.masociete.com"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nom d'h�te�:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Assistant de configuration r�seau"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem RNIS/ISDN externe"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Carte RNIS/ISDN interne"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Quel est le type de votre connexion RNIS/ISDN�?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Quelle configuration RNIS/ISDN pr�f�rez-vous?\n"
-"\n"
-"- L'ancienne configuration contient des outils puissants,\n"
-"  mais est difficile � configurer, et n'est pas standard.\n"
-"  Elle utilise ��isdn4net��\n"
-"- La nouvelle configuration est plus facile � comprendre\n"
-"  et plus standard, mais a moins d'outils.\n"
-"  Elle utilise ��isdn-light��\n"
-"Nous recommandons la seconde (isdn-light)\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "nouvelle configuration (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "ancienne configuration (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configuration RNIS/ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Veuillez choisir votre fournisseur d'acc�s.\n"
-"S'il ne figure pas dans la liste, choisissez ��Non list頻."
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protocole pour l'Europe"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocole pour l'Europe (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protocole pour le reste du monde"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocole pour le reste du monde \n"
-" Pas de D-Channel (lignes lou�es)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Quel protocole d�sirez-vous utiliser�?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Quel type de carte poss�dez-vous�?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Je ne sais pas"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Si vous poss�dez une carte ISA, les donn�es du prochain �cran devraient\n"
-"�tre correctes.\n"
-"\n"
-"Si vous poss�dez une carte PCMCIA, vous avez besoin de conna�tre\n"
-"les r�glages ��IRQ�� et ��IO�� de votre carte.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Arr�ter"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continuer"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Quel est le mod�le de votre carte RNIS/ISDN�?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Une carte RNIS/ISDN a �t� d�tect�e mais son type est inconnu. Veuillez "
-"s�lectionner une carte PCI dans le prochain �cran."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Aucune carte RNIS/ISDN identifi�e. Veuillez en s�lectionner une dans le\n"
-"prochain �cran."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Veuillez choisir le port s�rie sur lequel votre modem est connect�."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Options d'appel"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nom de la connexion"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Num�ro de t�l�phone"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Identifiant de connexion"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Bas�e sur un script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Manuelle par terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nom de domaine"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "serveur DNS principal (optionnel)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "serveur DNS secondaire (optionnel)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Vous pouvez vous d�connecter ou reconfigurer votre connexion."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Vous pouvez reconfigurer votre connexion."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Vous �tes actuellement connect� � l'internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Vous pouvez vous connecter � l'internet ou reconfigurer votre connexion."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Vous n'�tes actuellement pas connect� � l'internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Connecter"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Se d�connecter"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Configurez la connection"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Connexion internet et configuration"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Nous allons configurer la connexion %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Nous allons maintenant configurer la connexion %s.\n"
-"\n"
-"\n"
-"Cliquez sur OK pour continuer."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configuration du r�seau"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Comme vous �tes en train de faire une installation r�seau,\n"
-" cela veut dire que votre r�seau est d�j� configur�.\n"
-"Cliquez sur <Ok> pour conserver votre configuration,\n"
-"ou sur <Annuler> pour reconfigurer votre connexion internet et r�seau.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bienvenue dans l'assistant de configuration r�seau.\n"
-"\n"
-"Nous sommes sur le point de configurer votre connexion internet et r�seau.\n"
-"Si vous ne souhaitez pas utiliser la d�tection automatique, d�s�lectionnez "
-"la case correspondante.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Choisissez le profil � configurer"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Utiliser la d�tection automatique"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "D�tection des p�riph�riques..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Connexion par modem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "d�tect� sur le port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Connexion par RNIS/ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "d�tect� %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Connexion par ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "d�tect� sur l'interface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Connexion par Cable"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Connexion par Cable d�tect�e"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Connection � travers un r�seau local (LAN)"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "carte(s) ethernet d�tect�e(s)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Choisissez la connexion que vous voulez configurer"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Vous avez configur� plusieurs moyens d'acc�s � l'internet.\n"
-"Choisissez celui que vous voulez utiliser.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Connexion internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "D�sirez-vous activer la connexion lors du d�marrage�?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configuration du r�seau"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Le r�seau doit �tre red�marr�"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Un probl�me est survenu pendant le red�marrage du r�seau�: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"F�licitations, votre choix de configuration internet et r�seau est "
-"termin�e.\n"
-"La configuration va maintenant �tre appliqu�e � votre syst�me.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Une fois termin�, il est recommand� de red�marrer votre interface graphique, "
-"afin d'�viter les probl�mes li�s au changement de nom d'h�te de la machine."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Des probl�mes sont apparus pendant la configuration.\n"
-"Testez votre connexion avec le ��Centre de Contr�le Mandrake�� (dans la "
-"section ��r�seau��) ou la commande ��net_monitor��. Si votre connexion ne "
-"fonctionne pas, vous pouvez essayer de relancer la configuration."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ATTENTION�: Ce p�riph�rique a d�j� �t� configur� pour la connexion "
-"internet.\n"
-"\n"
-"Cliquez simplement sur ��OK�� pour conserver sa configuration.\n"
-"Sinon la configuration actuelle sera �cras�e par les modifications que vous "
-"ferez."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Veuillez indiquer la configuration IP de cette machine.\n"
-"Chaque champ doit �tre compl�t� avec une adresse IP en notation\n"
-"d�cimale point�e (par exemple, 12.34.56.78)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configuration du p�riph�rique r�seau %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (pilote %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Adresse IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Masque de sous-r�seau"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(BOOTP/DHCP)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Attribution automatique de l'adresse IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L'adresse IP doit ressembler � quelque chose comme ��192.168.1.20��"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Veuillez indiquer un nom d'h�te pour la machine.\n"
-"Celui-ci doit �tre un nom de machine pleinement qualifi�, par exemple�:\n"
-"mamachine.monlabo.masociete.com\n"
-"Vous pouvez �galement indiquer l'adresse IP de la passerelle\n"
-"si votre r�seau local en poss�de une."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Serveur DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Passerelle (p.ex. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "P�riph�rique passerelle"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configuration des serveurs mandataires (proxy)"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Serveur mandataire HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Serveur mandataire FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Identifiant de la carte r�seau (utile pour les portables)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "La syntaxe doit �tre http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "La syntaxe doit �tre ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configuration de l'acc�s internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Voulez-vous vous connecter � l'internet maintenant�?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Test de votre connexion..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Le syst�me est � pr�sent connect� � l'internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Pour des raisons de s�curit�, il va �tre d�connect� maintenant."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Le syst�me ne semble pas connect� � l'internet.\n"
-"Essayez de reconfigurer votre connection."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configuration de la connexion"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Veuillez compl�ter ou v�rifier les champs ci-dessous"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "n� IRQ de la carte"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Plage m�moire (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "E/S de la carte"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "E/S_O de la carte"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "E/S_1 de la carte"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Votre num�ro de t�l�phone personnel"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Fournisseur d'acc�s (ex.: provider.fr)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Num�ro de t�l�phone pour l'acc�s"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "1er DNS du fournisseur (optionnel)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "2�me DNS du fournisseur (optionnel)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Choisissez votre pays"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Num�rotation"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Vitesse de connexion"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Temps maxi pour �tablir la connexion (en sec.)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "nom d'utilisateur du compte"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Mot de passe du compte"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "Le montage a �chou�: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Les partitions �tendues ne sont pas support�e par cette plateforme"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Il y a un espace vide dans la table des partitions mais il est\n"
-"inutilisable. La seule solution est de d�placer vos partitions primaires\n"
-"de telle fa�on que cet espace soit plac� contre les partitions �tendues."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restauration impossible depuis le fichier %s�: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Mauvais fichier de sauvegarde"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erreur d'�criture dans le fichier %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Votre disque dur semble avoir un probl�me mat�riel�:\n"
-"le test pour v�rifier son aptitude � conserver l'int�grit� des donn�es a "
-"�chou�.\n"
-"Cela signifie que serez victime de pertes al�atoires de donn�es."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "doit avoir"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "important"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "tr�s utile"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "utile"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "�ventuellement"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nouvelle G�n�ration"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Imprimante locale"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Imprimante distante"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Imprimante sur serveur CUPS distant"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Imprimante sur serveur LPD distant"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Imprimante r�seau autonome (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Imprimante sur serveur SMB (Windows 95/98/NT)"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Imprimante sur serveur NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Indiquer l'adresse du p�riph�rique d'impression"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Impression vers une commande shell"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Mod�le inconnu"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Imprimantes locales"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Imprimantes distantes"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " sur port parall�le \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", imprimante USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", p�riph�rique multi-fonctions sur le port parall�le \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", p�riph�rique  USB multi-fonctions"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", p�riph�rique HP JetDirect multi-fonctions"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", p�riph�rique multi-fonctions"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", impression sur %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "sur serveur d'impression LPD ��%s��, imprimante ��%s��"
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", h�te TCP/IP ��%s��, port ��%s��"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "sur serveur Windows ��%s��, partage ��%s��"
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "sur serveur Novell ��%s��, imprimante ��%s��"
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", en utilisant la commande %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Imprimante � acc�s direct (pas de pilote)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(sur %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(sur cette machine)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Sur serveur CUPS ��%s��"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (D�faut)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Type de connexion de l'imprimante"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Quel est le type de connexion de l'imprimante�?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Si vous utilisez un serveur CUPS distant, vous n'avez pas besoin de "
-"configurer d'imprimante ici. Elles seront automatiquement d�tect�es."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Configuration de CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Specifiez le serveur CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Avec les serveurs CUPS distants, vous n'avez pas besoin de configurer "
-"d'imprimante ici�; ceux-ci doivent fournir automatiquement � votre machine "
-"des informations sur les imprimantes disponibles. Toutes les imprimantes "
-"connues de votre ordinateur sont actuellement list�es dans le champ "
-"��Imprimante par d�faut��. Choisissez l'imprimante par d�faut pour votre "
-"machine, puis cliquez sur le bouton ��Valider / Rafra�chir��. Ce bouton sert "
-"�galement � rafra�chir la liste. (il peut se passer jusqu'� 30 secondes "
-"avant que toutes les imprimantes distantes soient visibles). Si le serveur "
-"CUPS est sur un r�seau diff�rent, vous devez pr�ciser son adresse IP, et "
-"�ventuellement le num�ro de port afin d'obtenir les informations sur les "
-"imprimantes. Sinon, laissez ces champs vides."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalement, CUPS est configur� automatiquement en fonction de votre "
-"environnement r�seau, de fa�on que vous puissiez acc�der aux imprimantes "
-"g�r�es par les serveurs CUPS de votre r�seau local. Si cela ne fonctionne "
-"pas, d�sactivez ��configuration automatique  de CUPS�� et �ditez le fichier "
-"manuellement le fichier /etc/cups/cupsd.conf. N'oubliez pas ensuite de "
-"relancer CUPS (� l'aide de la commande�: ��service cups restart�� ou bien "
-"avec le ��Centre de Contr�le Mandrake�� dans la section ��Services��)."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "L'adresse IP doit ressembler � quelque chose comme ��192.168.1.20��"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Le num�ro de port doit �tre un nombre entier�!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "Adresse IP du serveur CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Configuration automatique du serveur CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "D�tection des p�riph�riques..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Test des ports"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Ajouter une nouvelle imprimante"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Bienvenue dans l'Assistant de Configuration d'Imprimante\n"
-"\n"
-"Cet assistant permet de configurer des imprimantes locales ou r�seau afin "
-"d'�tre utilis�e � partir de cette machine ainsi que des autres machines du "
-"r�seau.\n"
-"\n"
-"Toutes les informations n�cessaires pour configurer l'imprimante vous seront "
-"demand�es; vous aurez �galement acc�s � tous les pilotes d'imprimantes "
-"disponibles ainsi qu'� toutes leurs options et � tous les types de "
-"connection."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Imprimante locale"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Bienvenue dans l'Assistant de configuration de l'imprimante.\n"
-"\n"
-"Cet assistant vous aidera � installer les imprimantes connect�es\n"
-"� cet ordinateur.\n"
-"\n"
-"Veuillez maintenant brancher vos imprimantes sur l'ordinateur, \n"
-"et allumez-les, puis cliquez sur ��suivant��. Si vous ne voulez pas\n"
-" installer d'imprimante maintenant, cliquez sur ��annuler��.\n"
-"\n"
-"Notez que certains ordinateurs peuvent planter pendant\n"
-"l'autod�tection, donc dans ce cas d�selectionnez ��D�tection\n"
-"automatique des imprimantes��. Utilisez le mode expert de\n"
-"printerdrake si vous voulez installer une imprimante r�seau\n"
-"qui n'est pas list�e automatiquement."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "D�tection automatique des imprimantes"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"F�licitation, votre imprimante est maintenant install�e et configur�e.\n"
-"\n"
-"Vous pouvez imprimer en utilisant la commande ��imprimer�� de vos\n"
-"applications (souvent dans le menu ��fichier��).\n"
-"\n"
-"Si vous voulez ajouter, enlever ou renommer une imprimante, ou sivous voulez "
-"changer les options par d�faut (alimentation papier,qualit� d'impression, "
-"etc.), rendez-vous dans la partie ��imprimante��de la section ��mat�riel�� "
-"du Centre de Contr�le Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "D�tection automatique des imprimantes"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake est capable d'auto-d�tecter les imprimantes parall�le et USB\n"
-"connect�es directement � votre ordinateur, mais veuillez noter que sur\n"
-"certains syst�mes la d�tection automatique PEUT BLOQUER VOTRE ORDINATEUR\n"
-"ET DONC PEUT-�TRE CORROMPRE VOTRE SYST�ME DE FICHIERS�!\n"
-"Faites-le donc � VOS RISQUES ET P�RILS�!\n"
-"\n"
-"Voulez-vous vraiment auto-d�tecter vos imprimantes�?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Lancer la d�tection automatique"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Configurer l'imprimante manuellement"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "D�tect� %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Imprimante sur le port parall�le \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Imprimante USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Aucune imprimante locale n'a pu �tre trouv�e!\n"
-"Pour en installer une manuellement entrez un nom de p�riph�rique ou de "
-"fichier sur la ligne d'entr�e (Ports parall�les�: /dev/lp0, /dev/lp1, ..., "
-"�quivalents � LPT1:, LPT2:, ..., premi�re imprimante USB�: /dev/usb/lp0, "
-"deuxi�me imprimante USB�: /dev/usb/lp1, ...) "
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Vous devez enter un nom de fichier ou de p�riph�rique!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Aucune imprimante locale n'a pu �tre trouv�e!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Les imprimantes r�seaux ne peuvent �tre configur�es qu'apr�s l'installation. "
-"Choississez ��Mat�riel�� puis ��Imprimantes�� dans le Centre de Contr�le de "
-"Mandrake."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Pour installer les imprimantes r�seaux, cliquez sur ��Annuler��, puis passez "
-"en ��Mode Expert�� et cliquez � nouveau sur ��Ajouter une nouvelle "
-"imprimante��."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"L'imprimante suivante a �t� auto-d�tect�e; si ce n'est pas celle que vous "
-"voulez configurer, tapez un nom de fichier ou de p�riph�rique dans le champs "
-"d'entr�e"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Voici une liste de toutes les imprimantes auto-d�tect�es. Veuillez choisir "
-"l'imprimante que vous voulez configurer ou tapez un nom de p�riph�rique ou "
-"de fichier dans le champs d'entr�e"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"L'imprimante suivante a �t� auto-d�tect�e. La configuration de cette "
-"imprimante sera effectu�e automatiquement. Si votre imprimante n'a pas �t� "
-"correctement d�tect�e ou si vous pr�f�rer effectuer une configuration "
-"personalis�e, activez ��Configuration Manuelle �� ."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Voici une liste de toutes les imprimantes auto-d�tect�es. Veuillez choisir "
-"l'imprimante que vous voulez configurer. La configuration de cette "
-"imprimante sera effectu�e automatiquement. Si votre imprimante n'a pas �t� "
-"correctement d�tect�e ou si vous pr�f�rer effectuer une configuration "
-"personalis�e, activez ��Configuration Manuelle �� .\""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Veuillez choisir le port sur laquelle votre imprimante est connect�e ou "
-"tapez le nom du p�riph�rique ou de fichier dans le champs d'entr�e"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Veuillez choisir le port sur lequel votre imprimante est connect�e."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(Ports parall�les�: /dev/lp0, /dev/lp1, ..., �quivalents � LPT1:, "
-"LPT2:, ..., premi�re imprimante USB�: /dev/usb/lp0, deuxi�me imprimante "
-"USB�: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Vous devez choisir ou entrer une imprimante ou un p�riph�rique�!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Configuration manuelle"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Votre imprimante est-elle un appareil multifonction de HP (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 with scanner)�?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Installation du paquetage HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "V�rification du p�riph�rique et configuration de HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Installation du paquetage SANE ..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Acquisition � partir de votre p�riph�rique multi-fonction HP"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Mise � disposition du port imprimante pour CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Lecture de la base de donn�es des imprimantes..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Configuration d'une imprimante Unix (lpd) distante"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Pour utiliser une imprimante Unix distante, vous devez indiquer le nom "
-"d'h�te du serveur LPD et le nom attribu� � l'imprimante par ce serveur."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Nom d'h�te du serveur"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Nom de l'imprimante"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Nom du serveur distant manquant�!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Le nom de l'imprimante est manquant�!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Configuration d'une imprimante SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Afin de pouvoir acc�der � une imprimante connect�e � un serveur SMB, vous "
-"devez indiquer le nom SMB du serveur (attention, ce dernier peut �tre "
-"diff�rent de son nom TCP/IP) et, �ventuellement, son adresse IP ainsi que le "
-"nom de l'imprimante et toute information applicable quant au nom "
-"d'utilisateur, mot de passe et groupe de travail n�cessaires pour acc�der � "
-"l'imprimante."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Nom du serveur"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "Adresse IP du serveur"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nom de partage de l'imprimante"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Groupe de travail"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Il faut au moins pr�ciser le nom du serveur ou son adresse IP."
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Il faut pr�ciser le nom de partage de l'imprimante."
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "ALERTE DE S�CURITɠ!"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Options de l'imprimante NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Pour pouvoir utiliser une imprimante connect�e � un serveur Netware, vous "
-"devez au moins indiquer le nom Netware du serveur (qui peut �tre diff�rent "
-"du nom d'h�te TCP/IP) et le nom de la file d'impression � laquelle vous "
-"voulez acc�der ainsi qu'un nom de login et un mot de passe si n�cessaire."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Nom du serveur d'impression"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nom de la file d'impression"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Nom du serveur NCP manquant!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Nom de la file d'attente NCP manquant!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Options de l'imprimante r�seau (TCP/socket)"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Pour imprimer sur une imprimante TCP ou socket, vous devez indiquer le\n"
-"nom d'h�te de l'imprimante et, optionellement, le num�ro du port.\n"
-"Pour les serveurs d'impression ��HP JetDirect��, le num�ro du\n"
-"port est habituellement 9100, mais cela peut �tre diff�rent pour\n"
-"d'autres serveurs. Veuillez consulter le manuel de votre imprimante."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Nom d'h�te de l'imprimante"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Nom d'h�te de l'imprimante manquant�!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Adresse r�seau du p�riph�rique d'impression"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Si vous la connaissez, vous pouvez sp�cifier directement l'adresse r�seau "
-"(URL) qui permet d'acc�der � l'imprimante. Choisissez un en-t�te puis "
-"compl�tez l'adresse en respectant les sp�cifications CUPS ou Foomatic. Notez "
-"que tous les types d'URL ne sont pas support�s par tous les gestionnaires "
-"d'impression."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Une adresse valide doit �tre entr�e�!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Toute imprimante a besoin d'un nom (par exemple ��lpr��) auquel on se r�f�re "
-"pour pouvoir imprimer.\n"
-"Les champs ��Description�� et ��Emplacement�� n'ont pas besoin d'�tre "
-"remplis. Ce sont de simples commentaires pour les utilisateurs."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nom de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Description"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Emplacement"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Pr�paration de la base de donn�es des imprimantes..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Le mod�le de votre imprimante"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Le nom de mod�le r�sultant de l'autod�tection a �t� compar�e � la basede "
-"donn�es d'imprimantes pour trouver la meilleure correspondance.Ce choix peut "
-"�tre mauvais, particuli�rement si votre mod�le d'imprimanten'appara�t pas "
-"dans la base de donn�es. V�rifiez ce choix, puis cliquez sur��Le mod�le est "
-"correct��, ou le cas �ch�ant sur ��S�lectionner manuellement  le mod�le��.\n"
-"\n"
-"Votre imprimante a �t� d�tect�e comme �tant�:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Le mod�le est correct"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "S�lectionner manuellement le mod�le"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "S�lection du mod�le de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Quel mod�le d'imprimante poss�dez-vous�?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Veuillez v�rifier si l'imprimante a �t� correctement d�tect�e Cherchez le "
-"mod�le correct dans la liste si le curseur se situe sur un mod�le erron� ou "
-"sur ��Imprimante � acc�s direct��."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Si votre imprimante n'est pas list�e, choisissez-en une compatible (voir le "
-"manuel de l'imprimante) ou similaire."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Configuration de l'imprimante OKI winprinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Vous �tes en train de configurer une imprimante laser OKI winprinter.\n"
-"Ces imprimantes utilisent un protocole de communication tr�s sp�cial, et "
-"elles ne fonctionnent que si elles sont connect�es au premier port "
-"parall�le. Si votre imprimante est connect�e � un autre port ou � un serveur "
-"d'impression, veuillez la connecter au premier port parall�le avant "
-"l'impression de la page de test. Sans cela, l'imprimante ne fonctionnera pas "
-"Vos param�tres de type de connexion seront ignor�s par le pilote."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Configuration de l'imprimante Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Les pilotes d'impression inkjet fournis par Lexmark ne permettent que "
-"l'utilisation des imprimantes locales, et pas des imprimantes distantes ou "
-"des serveurs d'impression. Veuillez connecter votre imprimante sur un port "
-"local ou configurez-la sur la machine � laquelle elle est connect�e."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Afin de pouvoir imprimer avec votre imprimante Lexmark inkjet et la "
-"configuration actuelle, vous avez besoin des pilotes d'impression inkjet "
-"fournis par Lexmark (http://www.lexmark.com/). Allez sur la section "
-"��Drivers�� du site am�ricain de Lexmark, puis choisissez votre mod�le et "
-"enfin ��Linux�� comme syst�me d'exploitation. Les pilotes sont des "
-"paquetages RPM ou des scripts shell avec une installation graphique "
-"interactive. Vous n'avez pas besoin de faire cette configuration avec "
-"l'interface graphique. Annulez directement apr�s l'acceptation de la "
-"licence. Ensuite, imprimez les pages pour l'alignement des t�tes "
-"d'impression avec ��lexmarkmaintain�� et ajustez les param�tres de ces t�tes "
-"avec ce programme."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Param�trage de l'imprimante par d�faut.\n"
-"\n"
-"Assurez-vous que la taille de la page et le type d'encre (si disponible) "
-"sont correctement indiqu�s. Notez que la vitesse d'impression peut diminuer "
-"si vous augmentez la qualit� d'impression."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "L'option %s doit �tre un nombre entier�!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "L'option %s �tre un nombre�!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "L'option %s est en dehors des limites�!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"D�sirez-vous que l'imprimante ��%s�� soit l'imprimante\n"
-"par d�faut�?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Pages de test"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Merci de s�lectionner les pages de test que vous voulez imprimer.\n"
-"Note�: la page de test photo peut prendre un temps assez long pour "
-"s'imprimer, et sur les imprimantes laser avec trop peu de m�moire, elle peut "
-"m�me ne pas sortir.\n"
-"Dans la plupart des cas, l'impression de la page de test standard suffit."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Pas de page de test"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Imprimer"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Page de test standard"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Page de test alternative (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Page de test alternative (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Page de test photo"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Ne pas imprimer de page de test"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Impression des pages de test..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Les pages de test ont �t� envoy�es � l'imprimante.\n"
-"Il peut se passer un certain temps avant le d�but effectif de l'impression.\n"
-"Statut de l'impression�:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Les pages de test ont �t� envoy�es � l'imprimante.\n"
-"Il peut se passer un certain temps avant le d�but effectif de l'impression.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "�tes-vous satisfait du r�sultat�?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Imprimante � acc�s direct"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Pour imprimer un fichier depuis la ligne de commande (une fen�tre de "
-"terminal), vous pouvez soit utiliser la commande ��%s <fichier>�� ou un "
-"utilitaire d'impression graphique:���xpp <fichier>�� ou ��kprinter "
-"<fichier>��. Les utilitaires graphiques vous permettent de choisir "
-"l'imprimante et de modifier les param�tres d'impression facilement.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Vous pouvez �galement utiliser ces commandes dans le champ ��commande "
-"d'impression�� des bo�tes de dialogue d'impression dans de nombreuses "
-"applications. Dans ce cas n'indiquez pas le nom du fichier puisqu'il sera "
-"fourni par l'application elle-m�me.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"La commande ��%s�� permet �galement de modifier les param�tres d'impression "
-"pour une impression particuli�re. Il suffit pour cela d'ajouter les "
-"param�tres voulus sur la ligne de commande. Par exemple, ��%s <fichier>��. "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Pour obtenir la liste des param�tres disponibles pour l'imprimante courante, "
-"lisez la liste ci-dessous ou cliquez sur le bouton ��liste des options "
-"d'impression��.%s\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Voici la listes des options d'impression disponibles pour l'imprimante "
-"courante:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Pour imprimer un fichier depuis la ligne de commande (une fen�tre de "
-"terminal), utilisez la commande ��%s�<fichier>�.\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Cette commande peut �galement �tre utilis�e dans le champ ��commande "
-"d'impression�� des bo�tes de dialogue d'impression dans de nombreuses "
-"applications. Dans ce cas, n'indiquez pas le nom du fichier � imprimer "
-"puisque celui-ci sera fourni par l'application elle-m�me.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Pour obtenir la liste des param�tres disponibles pour l'imprimante courante, "
-"cliquez sur le bouton ��liste des options d'impression��."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Pour imprimer un fichier depuis la ligne de commande (une fen�tre de "
-"terminal), utilisez la commande ��%s <fichier>�� ou ��%s <fichier>��.\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Vous pouvez �galement utiliser l'interface graphique ��xpdq�� pour "
-"positionner des options d'impression et administrer les travaux "
-"d'impression.\n"
-"Si vous utiliser le bureau KDE, vous disposez d'un ��bouton panique��, une "
-"ic�ne sur le bureau, nomm� ��STOP Imprimante�!��, qui peut suspendre tous "
-"les travaux d'impression. Ceci peut �tre utile en cas de bourrage papier, "
-"par exemple.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Les commandes ��%s�� et ��%s�� permettent �galement de modifier les "
-"param�tres d'impression pour une impression particuli�re. Il suffit pour "
-"cela d'ajouter les param�tres voulus sur la ligne de commande, par exemple "
-"��%s <fichier>��.\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Fermer"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Impression/Acquisition sur l'imprimante ��%s��"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Impression sur l'imprimante ��%s��"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Liste des options d'impression"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Votre appareil multifonction HP a �t� configur� automatiquement pour �tre "
-"capable de scanner. Maintenant vous pouvez scanner avec "
-"��scanimage�� ( ��scanimage -d hp:%s�� pour sp�cifier le scanner si vous en "
-"avez plus d'un) � partir de la ligne de commande, ou avec des interfaces "
-"graphiques comme ��xscanimage�� ou ��xsane��. Si vous utilisez ��Le Gimp��, "
-"vous pouvez aussi scanner grace au menu ��Fichier / Acquisition��. Pour "
-"avoir plus d'information, vous pouvez taper ��man scanimage�� ou ��man sane-"
-"hp�� dans une fen�tre de commandes.\n"
-"\n"
-"N'utilisez pas ��scannerdrake�� pour cet appareil�! "
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Votre appareil multifonction HP a �t� configur� automatiquement pour �tre "
-"capable de scanner. Maintenant vous pouvez scanner avec ��tal-hp %s scan ... "
-"� dans une fen�tre de commandes. L'acquisition par interface graphique ou "
-"grace � ��Gimp�� n'est pas encore suport�e avec cet appareil. Vous trouverez "
-"plus d'informations dans le fichier /usr/share/doc/hpoj-0.8/ptal-hp-scan."
-"html sur votre syst�me. Si vous avez une HP LaserJet 1100 ou 1200, vous "
-"pouvez seulement scanner si vous avez l'option ��scanner�� install�e.\n"
-"\n"
-"N'utilisez pas ��scannerdrake�� pour cet appareil�! "
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Lecture des donn�es de l'imprimante..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Transfert de la configuration de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Vous pouvez copier la configuration de l'imprimante faite pour le "
-"gestionnaire %s vers votre gestionnaire actuel %s. Toutes les donn�es de "
-"configuration (nom de l'imprimante, description, emplacement, type de "
-"connexion, et param�tres par d�faut) sont r�cup�r�es, mais les travaux ne "
-"seront pas transf�r�s.\n"
-"Toutes les files d'attente n'ont pas pu �tre transf�r�es � cause des raisons "
-"suivantes�:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ne supporte pas les imprimantes sur les serveurs Novell ni les "
-"impressions vers des commandes shell.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ne supporte que les imprimantes locales, les imprimantes LPD distantes, "
-"et les imprimantes r�seau autonomes.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD et LPRng ne supportent pas les imprimantes IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"De plus, les files d'attente qui n'ont pas �t� cr��es avec ce programme ou "
-"avec �foomatic-configure� ne peuvent pas �tre transf�r�es."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Aussi, les imprimantes configur�es avec les fichiers PPD fournis par leur "
-"fabriquant ou avec des pilotes CUPS natifs ne peuvent pas �tre transf�r�es."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Cochez les imprimantes que vous voulez transf�rer, et\n"
-"cliquez sur ��Transfert��."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Ne pas transf�rer les imprimantes"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Transfert"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Une imprimante nomm�e ��%s�� existe d�j� sous %s.\n"
-"Cliquez sur ��Transfert�� pour la remplacer.\n"
-"Vous pouvez �galement taper un nouveau nom ou\n"
-"simplement ignorer cette imprimante."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Le nom de l'imprimante ne devrait contenir que des lettres, des nombres et "
-"des tirets bas (_)"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"L'imprimante ��%s�� existe d�j�,\n"
-"voulez-vous vraiment �craser sa configuration�?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nouveau nom de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Transfert de %s..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Vous avez transf�r� votre pr�c�dente imprimante par d�faut (��%s��). Doit-"
-"elle �tre �galement l'imprimante par d�faut de votre nouveau syst�me "
-"d'impression %s�?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Mise � jour des donn�es de l'imprimante..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Configuration d'une imprimante distante"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "D�marrage du r�seau..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Configurez le r�seau maintenant"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Les fonctionnalit�s du r�seau ne sont pas configur�es"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Vous �tes sur le point de configurer une imprimante distante. Cela n�cessite "
-"un acc�s au r�seau, mais votre r�seau n'est pas encore configur�. Si vous "
-"voulez continuer sans configurer le r�seau, vous ne pourez pas utiliser "
-"l'imprimante que vous �tes en train de configurer. Que voulez-vous faire�?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Continuer sans configurer le r�seau"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"L'interface r�seau qui a �t� configur�e pendant l'installation ne peut pas "
-"�tre d�marr�e maintenant. Veuillez v�rifier si votre r�seau est activ� apr�s "
-"d�marrage. D�marrez le ��Centre de Contr�le Mandrake��, v�rifiez la "
-"configuration dans la section ��r�seau et internet / connexion��. Puis "
-"essayez � nouveau de configurer l'imprimante dans la section ��Mat�riel / "
-"Imprimante��."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"L'acc�s r�seau n'a pas pu �tre d�marr�. Veuillez v�rifier la configuration "
-"de votre mat�riel et de votre acc�s r�seau gr�ce au ��Centre de Contr�le "
-"Mandrake�� puis essayez � nouveau de configurer l'imprimante distante."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Red�marrage du syst�me d'impression..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "�lev�"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "parano�aque"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installation du syst�me d'impression sous le niveau de s�curit� ��%s��"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Vous �tes sur le point d'installer le syst�me d'impression %s sur un syst�me "
-"dont le niveau de s�curit� est r�gl� sur ��%s��.\n"
-"\n"
-"Ce syst�me d'impression �coute en permanence le r�seau afin de r�pondre aux "
-"requ�tes d'impression. Ceci se fait gr�ce � un processus (daemon) qui tourne "
-"en t�che de fond et qui est accessible par les autres machines du r�seau. "
-"C'est donc une cible possible pour des attaques r�seau �ventuelles. C'est "
-"pourquoi le minimum possible de ��daemons�� doivent �tre d�marr�s dans ce "
-"niveau de s�curit�.\n"
-"\n"
-"Voulez-vous r�ellement installer un syst�me d'impression�?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Activation du syst�me d'impression au d�marrage"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Le syst�me d'impression (%s) ne sera pas activ� automatiquement lors du "
-"d�marrage de la machine.\n"
-"\n"
-"Il est possible que l'activation automatique ait �t� supprim�e par "
-"l'utilisation d'un plus grand niveau de s�curit�, car les syst�mes "
-"d'impression sont des cibles potentielles d'attaque.\n"
-"\n"
-"Voulez-vous r�tablir l'activation automatique du syst�me d'impression�?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "V�rification du logiciel install�..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Suppression de LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Suppression de LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Choisissez le gestionnaire d'impression"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Quel syst�me d'impression d�sirez-vous utiliser�?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configuration de l'imprimante ��%s��..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Installation de Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Options de l'imprimante"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Pr�paration de PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Configuration des applications...."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "D�sirez-vous configurer l'impression�?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Syst�me d'impression�: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Les imprimantes suivantes sont configur�es. Double-cliquez sur l'une d'entre "
-"elles pour modifier ses param�tres, en faire l'imprimante par d�faut, "
-"consulter les informations � son propos ou pour rendre une imprimante d'un "
-"serveur CUPS distant utilisable par Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Les imprimantes suivantes sont configur�es. Cliquez sur l'une d'entre elles "
-"pour modifier ses param�tres, en faire l'imprimante par d�faut ou consulter "
-"les informations � son propos."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Rafra�chir la liste des imprimantes (pour afficher toutes les imprimantes "
-"CUPS distantes)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Changer le syst�me d'impression"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Mode normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "D�sirez-vous configurer une autre imprimante�?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Modifier la configuration de l'imprimante"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Imprimante %s\n"
-"Que souhaitez-vous modifier sur cette imprimante�?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Faire"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Type de connexion"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Nom, description, emplacement"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Marque, mod�le, pilote"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Marque, mod�le"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Choisir comme imprimante par d�faut"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Ajouter cette imprimante � StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Retirer cette imprimante de StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Imprimer des pages de test"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Savoir comment utiliser cette imprimante"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "D�sinstaller l'imprimante"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "D�sinstallation de l'ancienne imprimante ��%s��..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Imprimante par d�faut"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "L'imprimante ��%s�� est maintenant celle par d�faut."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Ajout de l'imprimante � StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "L'imprimante ��%s�� a �t� ajout�e avec succ�s � StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Impossible d'ajouter l'imprimante ��%s�� � StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Retrait de l'imprimante de StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "L'imprimante ��%s�� a �t� retir�e avec succ�s de StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Impossible de retirer l'imprimante ��%s�� de StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "D�sirez-vous vraiment d�sinstaller l'imprimante ��%s��?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Suppression de l'imprimante ��%s��..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configuration des serveurs mandataires (proxy)"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Bienvenue dans la configuration du serveur mandataire (proxy).\n"
-"\n"
-"Vous allez pouvoir configurer ici vos serveurs mandataires http et ftp\n"
-"avec ou sans identifiant et mot de passe\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Veuillez entrer les informations concernant le mandataire http\n"
-"ou laissez-les vide si vous ne voulez pas de ce mandataire"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "L'URL doit commencer par 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Le num�ro de port doit �tre num�rique"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Veuillez entrer les informations concernant le mandataire ftp\n"
-"ou laissez-les vide si vous ne voulez pas de ce mandataire"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "L'URL doit commencer par 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Veuillez entrer l'identifiant et le mot de passe pour le mandataire,\n"
-"si n�cessaire.\n"
-"Laissez-les vides si vous n'en voulez pas"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "identifiant"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Mot de passe"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "R�-entrer le mot de passe"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Les mots de passe ne correspondent pas. R�essayez�!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-"Impossible d'ajouter une partition au RAID md%d car\n"
-"celui-ci est d�j� format�"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Impossible d'�crire le fichier %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "��mkraid�� a �chou�"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "��mkraid�� a �chou� (les ��raidtools�� sont-ils install�s�?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Trop peu de partitions pour du RAID de niveau %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-"D�marrage ou arr�t du syst�me sonore ALSA (Advanced Linux Sound "
-"Architecture) Il charge le pilote pour votre carte son, et restaure les "
-"r�glages du p�riph�rique de mixage."
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-"Anacron ex�cute des t�ches p�riodiques avec une pr�cision exprim�e en jours. "
-"Les t�ches sont ex�cut�es automatiquement au red�marrage de la machine si "
-"elles ont expir�s leur d�lai. Quelques t�ches de maintenance quotidiennes et "
-"hebdomadaires sont pr�configur�es pour le syst�me Mandrake.(Plus d'infos "
-"dans ��man anacron��)"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Apmd surveille l'�tat de la batterie d'un portable, et en garde une trace "
-"(via syslog). Il peut �tre utilis� pour arr�ter proprement la machine "
-"lorsque la batterie est tr�s faible et apr�s avoir averti les utilisateurs."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Service qui permet de d�marrer une t�che � une heure pr�cise. Chaque t�che "
-"doit �tre cr��e par la commande ��at��, puis, a l'heure dite, le service "
-"��atd�� lance cette t�che. Par exemple pour �teindre automatiquement la "
-"machine ce soir � 23h59, tapez ��at 23:59�� dans une fen�tre de commande, "
-"puis ��halt�� et <Ctrl-D>."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Cron est un planificateur de t�ches. Contrairement � Anacron, les t�ches "
-"sont ex�cut�es � des moments pr�cis, pendant lesquels la machine doit �tre "
-"allum�e. ��Vixie cron�� ajoute des fonctionnalit�s au ��cron�� UNIX de base "
-"(notamment une meilleure s�curit� et des options de configuration plus "
-"compl�tes)."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM permet d'utiliser la souris dans des applications fonctionnant en mode "
-"texte dans la console (comme par exemple Midnight Commander) . Il permet "
-"�galement d'utiliser le copier-coller et inclut le support des menus "
-"contextuels sur la console."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake effectue une d�tection mat�rielle, et configure �ventuellement le "
-"nouveau mat�riel."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache est un serveur web (HTTP). Il est utilis� pour faire fonctionner un "
-"site internet."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Le m�taserveur ��inetd�� sert � d�marrer automatiquement les autres serveurs "
-"r�seau lorsqu'une requ�te est d�tect�e. Il est notamment responsable du "
-"d�marrage des serveurs telnet, ftp, rsh et rlogin, etc. Le d�sactiver "
-"revient � d�sactiver tous les services qu'il g�re."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"D�marre le filtrage des paquets r�seau pour la s�rie 2.2 des noyaux Linux, "
-"afin de mettre en place un pare-feu (firewall) pour prot�ger votre machine "
-"des attaques r�seau. "
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ce paquetage active la disposition de clavier d�fini dans le fichier /etc/"
-"sysconfig/keyboard. Cette disposition peut �tre modifi�e en utilisant "
-"l'outil kbdconfig. Ce service devrait �tre activ� sur la plupart des "
-"machines."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"R�g�n�ration automatique des fichiers d'en-t�tes pour le noyau\n"
-"dans le dossier /boot pour /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "D�tection automatique et configuration du mat�riel au d�marrage."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf effectue certaines t�ches au d�marrage afin de maintenir la "
-"configuration du syst�me."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Lpd est le serveur d'impression n�cessaire au bon fonctionnement de la "
-"commande  lpr. Il permet g�rer les files d'attente et les demandes "
-"d'impression."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Activation / d�sactivation du Linux Virtual Server, qui est un service "
-"utilis� pour cr�er un serveur virtuel haute-performance et haute "
-"disponibilit�, compos� d'un ensemble de serveur linux reli�s entre eux."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Named (BIND) est un Serveur de Noms de Domaine (DNS) qui est utilis� pour "
-"convertir les adresses internet en adresses IP. (Il est principalement mis "
-"en place par les fournisseur d'acc�s)"
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Effectue la connexion ou la d�connexion (montage et d�montage) vers les "
-"syst�mes de fichiers distants ou r�pertoires partag�s de type NFS (Unix), "
-"SMB (Windows), et NCP (Netware) que vous avez configur�s. (Pour NFS et SMB, "
-"voir le ��Centre de contr�le Mandrake��,  dans la section ��mat�riel / "
-"points de montage��)"
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Gestion group�e de toutes les connexions r�seau que vous avez configur�es et "
-"que vous avez choisi d'activer d�s le d�marrage du syst�me.  (par ex. vos "
-"connexions pour le r�seau local et l'ADSL ou le Cable). Vous pouvez acc�der "
-"s�par�ment � vos interfaces r�seau gr�ce au ��Centre de  Contr�le Mandrake�� "
-"dans la section ��Internet et r�seau��."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"D�marrage ou arr�t du serveur NFS. Un serveur NFS permet d'effectuer un "
-"partage de fichiers en ouvrant l'acc�s � certains dossiers depuis un r�seau. "
-"Les dossiers partag�s sont list�s dans le fichier /etc/exports, mais vous "
-"pouvez  l'�diter gr�ce � ��linuxconf�� dans la section ��r�seau / serveur��."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Ce service permet le d�marrage des fonctionnalit�s de verrouillage des "
-"fichiers pour NFS, lorsque le noyau ne les a pas d�marr�es lui-m�me. Cela "
-"dit les noyaux r�cents n'en ont pas besoin. Cependant, le service statd est "
-"aussi d�marr� et sert � avertir les clients distants de l'arr�t du serveur "
-"NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Activation de la touche ��Verr Num�� du pav� num�rique du clavier au "
-"d�marrage."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Support des imprimantes winprinter OKI 4w et compatibles."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA permet d'utiliser des p�riph�riques PCCARD comme des cartes Ethernet "
-"ou des modems avec des ordinateurs portables. Ce service ne sera pas d�marr� "
-"� moins qu'il soit correctement configur�. Il peut donc �tre activ� sans "
-"danger sur des machines ne poss�dant pas ce type de p�riph�riques."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Le portmapper g�re les connexions RPC qui sont utilis�es par des serveurs "
-"comme NFS et NIS. Le serveur portmap doit �tre activ� sur des machines "
-"jouant le r�le de serveur pour des protocoles utilisant le m�canisme RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix est un agent de transport du courrier (Mail Transport Agent - MTA) "
-"permettant l'�change de courriers �lectroniques entre machines."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Sauvegarde et restaure l'entropie du syst�me pour une meilleure g�n�ration "
-"de nombres al�atoires. (utile par exemple pour la cr�ation de clefs de "
-"cryptographie)"
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Permet de faire appara�tre des p�riph�riques de type bloc (par ex. "
-"partitions de disque dur)  comme des p�riph�riques bruts � acc�s direct (raw "
-"devices). Les correspondances sont  �tablies dans le fichier /etc/sysconfig/"
-"rawdevices, et c'est la commande ��raw�� qui est utilis�e. Cela peut �tre "
-"utilis� par des bases de donn�es comme Oracle."
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Le service routed permet la mise � jour automatique des tables de routage IP "
-"gr�ce au protocole RIP. Bien que RIP soit tr�s utilis� sur les petits "
-"r�seaux, des protocoles de routage plus complets sont n�cessaires pour les "
-"r�seaux de plus grande taille. "
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Le protocole rstat permet aux utilisateurs sur un m�me r�seau d'obtenir des "
-"mesures de la performance de n'importe quelle machine sur ce r�seau."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Le protocole rusers permet aux utilisateurs de conna�tre tous les "
-"utilisateurs connect�s aux machines supportant ce protocole."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Le protocole rwho permet aux utilisateurs distants d'obtenir une liste des "
-"utilisateurs connect�s � une machine qui fait tourner le d�mon rwho "
-"(similaire � finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "D�marrer le syst�me de gestion du son sur votre machine."
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog est un service utilis� par beaucoup d'autres services pour "
-"enregistrer des rapports d'activit�. C'est une tr�s bonne id�e de toujours "
-"l'activer."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Charger les pilotes pour vos p�riph�riques usb."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"D�marre le serveur de polices de caract�res, obligatoire pour le  "
-"fonctionnement de l'interface graphique (XFree)"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Choisissez les services � d�marrer automatiquement lors du d�marrage du "
-"syst�me"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Impression"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Partage de fichiers"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Syst�me"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Administration � distance"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Serveur de base de donn�es"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Services�: %d activ�s sur %d enregistr�s"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Services"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "actif"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "arr�t�"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Serveurs et services"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr "Pas d'autre information au sujet de ce service, d�sol�."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Au d�marrage"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "D�marrer"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Arr�ter"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Merci d'avoir choisi Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Bienvenue dans le monde  Open Source"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Le principe du logiciel libre est � l'origine de MandrakeSoft et de son "
-"succ�s. Ce syst�me d'exploitation est le fruit du travail collaboratif et "
-"ouvert de la communaut� Linux. Ses contributeurs passionn�s sont r�partis "
-"dans le monde entier."
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Rejoignez le monde du logiciel libre�!"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Pour mieux conna�tre la communaut� Open Source et y contribuer, apprendre, "
-"partager vos connaissances, aider les autres membres et participer au "
-"d�veloppement d'outils, vous pouvez acc�der aux nombreux forums de "
-"discussions sur nos pages ��Communaut頻."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet et Messagerie"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 vous fournit les meilleures applications pour acc�der au "
-"meilleur de l'Internet: parcourir le web, visualiser des animations via "
-"Mozilla ou Konqueror,  �changer des e-mails et g�rer vos informations "
-"personnelles avec Evolution ou Kmail, et bien plus."
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multim�dia et Graphisme"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Gr�ce � Mandrake Linux 8.2, profitez au maximum des capacit�s multim�dia de "
-"votre ordinateur. Utilisez les plus r�centes applications pour g�rer vos "
-"fichiers audio et vid�o, �diter vos images ou collections de photos et "
-"regarder la t�l�vision et vos vid�os, et bien plus."
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "D�veloppement"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 est la plate-forme de choix pour le d�veloppement. "
-"D�couvrez la puissance du compilateur GNU gcc ainsi que les meilleurs "
-"environnements Open Source."
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Control Center"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Le Centre de Contr�le Mandrake de Mandrake Linux 8.2 vous permet de "
-"configurer enti�rement vos mat�riels et administrer votre machine depuis la "
-"m�me application."
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Interfaces utilisateur"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 fournit 11 environnements graphiques et gestionnaires de "
-"fen�tres diff�rents�: GNOME 1.4, KDE 2.2.2, Window Maker 0.8, ..."
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Logiciels Serveurs"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"En quelques clics, transformer votre ordinateur en un puissant serveur�: "
-"Serveur Web, e-Mail, Pare-Feu, Routeur, Partage de Fichiers et "
-"d'Imprimantes..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Jeux"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 vous fournit les meilleurs Jeux Open Source en arcade, "
-"action, sport, r�flexion, strat�gie, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Voulez-vous apprendre au sujet de Linux de mani�re simple, rapide et "
-"gratuite�? MandrakeCampus fournit un service d'apprentissage en ligne "
-"gratuit et Open Source, ainsi que des tests pour mesurer vos progr�s, sur "
-"MandrakeCampus -- votre centre d'apprentissage en ligne."
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"B�n�ficiez de l'aide de la communaut� et de MandrakeSoft pour obtenir un "
-"support de qualit�. En tant qu'expert, vous pourrez partagez vos "
-"connaissances et proposer du support � d'autres utilisateurs sur�:"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Parce que chaque projet soul�ve une probl�matique particuli�re, nos "
-"consultants sont � vos cot�s pour vous aider � trouver les r�ponses. "
-"MandrakeSoft vous apporte une v�ritable alternative informatique issue de "
-"son exp�rience d'�diteur."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"L'ensemble de nos solutions Linux, de nos offres exclusives sur nos produits "
-"et goodies sont disponibles via notre site de vente en ligne"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Pour plus d'informations sur les services professionnels et les offres "
-"commerciales de MandrakeSoft, veuillez consulter la page web suivante�:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Installation des paquetages..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"La table des partitions ne peut �tre lue car elle semble endommag�e.\n"
-"Une r�initialisation des partitions endommag�es va �tre tent�e."
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Erreur�!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Impossible de trouver le fichier image ��%s��."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Configurateur d'installation automatis�e"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Vous �tes sur le point de configurer une disquette d'auto-installation. "
-"Cette fonctionnalit� est relativement dangereuse, et doit donc �tre utilis�e "
-"avec pr�caution.\n"
-"\n"
-"La disquette d'auto-installation vous permettra d'installer un autre "
-"ordinateur avec exactement la m�me configuration que le v�tre. Mais parmi "
-"l'ensemble des �tapes d'installation, vous pouvez choisir lesquelles seront "
-"compl�tement  automatis�es et lesquelles seront manuelles.\n"
-"Pour une s�ret� maximale, les �tapes de partitionnement et de formatage ne "
-"seront jamais faites automatiquement, quels que soient les choix que vous "
-"aviez fait lors de la premi�re installation de cet ordinateur.\n"
-"\n"
-"Souhaitez-vous continuer�?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Configuration des �tapes automatiques"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Veuillez choisir, pour chaque �tape, si celle-ci doit �tre rejou�e comme "
-"pendant votre installation, ou si elle doit s'effectuer manuellement."
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Bienvenue.\n"
-"\n"
-"Les param�tres de l'installation automatique sont disponibles dans les "
-"sections sur la gauche."
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "F�licitations�!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"La disquette a �t� g�n�r�e avec succ�s.\n"
-"Vous pouvez maintenant rejouer votre installation."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Installation automatique"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Ajouter un �l�ment"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Supprimer le dernier �l�ment"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      Rapport de sauvegarde (DrakBackup) \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      Rapport de sauvegarde p�riodique (DrakBackup)\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    D�tails du rapport de sauvegarde\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "TOTAL�:"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Sauvegarde des fichiers syst�mes..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Sauvegarde sur disque dur..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Sauvegarde des comptes utilisateurs..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Sauvegarde sur disque dur..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Sauvegarde des autres fichiers..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"liste envoy�e par FTP�: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Probl�me de connection FTP: impossible d'envoyer les sauvegardes par "
-"FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Erreur lors de l'envoi du mail?\n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "S�lection de fichiers ou dossiers"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "S�lectionnez les fichiers ou dossiers puis cliquez sur ��Ajouter��"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Veuillez cocher toutes les options dont vous avez besoin.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Ces options peuvent sauvegarder et restaurer\n"
-"tous les fichiers du dossier de configuration syst�me ��/etc��\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Sauvegarder le dossier de configuration syst�me (dossier /etc)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Sauvegardes incr�mentales (�conomie d'espace)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Ne pas inclure les fichiers critiques (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Note�: la sauvegarde incr�mentale n'�crase pas les anciennes sauvegardes."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Veuillez cocher tous les comptes utilisateurs � sauvegarder"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Ne pas inclure le cache du navigateur internet (fichiers tampon)"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Sauvegardes incr�mentales (�conomie d'espace)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Supprimer s�lection"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Utilisateurs..."
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Sauvegarder par FTP"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Nom d'h�te ou adresse IP de la machine de sauvegarde"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr "Dossier o� poser la sauvegarde sur cette machine"
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Nom de connexion sur cette machine"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Veuillez entrer votre mot de passe"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Se souvenir du mot de passe"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "par connexion FTP..."
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "par connexion s�curis�e..."
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Sauvegarder sur CDR (ou DVDR)"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Veuillez choisir la taille de votre CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "CD R�inscriptible"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Effacer le CDRW avant sauvegarde"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Veuillez v�rifier que vous voulez inclure\n"
-"le lanceur de l'installation sur votre CD"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Veuillez entrer l'emplacement de votre graveur (bus,id,lun)\n"
-"(d�tecter avec ��cdrecord -scanbus��. Par exemple�: 0,1,0 )"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Sauvegarde sur cartouche"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Nom de p�riph�rique du mat�riel de sauvegarde (/dev/...?)"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr "Taille maximale de sauvegarde�:"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Dossier o� poser la sauvegarde�:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Limiter la taille de la sauvegarde"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "par transfert r�seau..."
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Dans un dossier (local ou partag�)..."
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "toutes les heures"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "tous les jours"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "toutes les semaines"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "tous les mois"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Sauvegarde p�riodique"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Veuillez choisir l'intervalle de temps entre les sauvegardes"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Quelle sauvegarde sera p�riodique�?"
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "celle sur Disque dur / NFS"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "celle par FTP"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"ATTENTION�: Le ��cron�� doit �tre actif dans vos services. (voir le ��Centre "
-"de Contr�le Mandrake�� section ��syst�me / services��)"
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Envoyer un rapport par mail apr�s chaque sauvegarde �:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Quoi..."
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "O�..."
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Quand..."
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Plus d'options..."
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Configuration de sauvegarde Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Veuillez choisir o� stocker la sauvegarde"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "sur disque dur"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "par r�seau"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Veuillez choisir ce que vous voulez sauvegarder"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Sauvegarder le syst�me"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Sauvegarder les comptes utilisateurs"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "S�lectionner individuellement les utilisateurs"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Sources de sauvegarde�: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Fichiers syst�me:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Donn�es des utilisateurs�:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Autres fichiers ou dossiers�:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Sauvegarde sur le disque dur dans le dossier�: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Sauvegarde par FTP sur la machine�: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t nom de connexion�: %s\n"
-"\t\t dans le dossier�: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Options:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tFichiers syst�mes non inclus\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tLe sauvegarde utilise ��tar�� et ��bzip2��\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tLa sauvegarde utilise ��tar�� et ��gzip��\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Le D�mon (%s) comprend�:\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-celle sur Disque dur.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-celle sur CDR.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-celle par transfert FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-celle par transfert SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"La configuration de sauvegarde n'est pas encore d�finie. \n"
-"Veuillez cliquer sur ��Configuration par assistant��, ou ��Configuration "
-"manuelle��\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Liste de donn�es � restaurer�:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Liste des donn�es corrompues�:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Veuillez le d�cocher ou le retirer la prochaine fois"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Les fichiers de sauvegarde sont corrompus"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "    Toutes vos donn�es s�lectionn�es ont �t�          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-"    correctement restaur�es en prenant ��%s�� comme dossier racine      "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Restauration de la configuration       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK pour restaurer les autres fichiers."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Fichiers de sauvegarde � restaurer (seul le plus r�cent compte)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Sauvegarder les fichiers syst�me avant�:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Veuillez choisir la date � restaurer"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Sauvegarde sur disque dur"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Restaurer � partir d'un dossier"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Veuillez entrer le dossier o� r�sident les sauvegardes"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Choisir un autre support de sauvegarde"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Autre support"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Restaurer le syst�me"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Restaurer les comptes utilisateurs"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Restaurer les autres fichiers ou dossiers"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "Choisir un autre dossier racine de restauration ( au lieu de / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Nouvelle sauvegarde avant restauration (seulement pour l'incr�mental)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Retirer les dossiers personnels ds utilisateurs avant restauration"
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Restaurer toutes les sauvegardes..."
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Restauration personnalis�e..."
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Aide"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "<- Pr�c�dent"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Valider"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Sauvegarder�!"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Restaurer�!"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Suivant ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Merci de vouloir faire une sauvegarde avant de vouloir restaurer... (ou bien "
-"v�rifiez que votre dossier de sauvegarde est correct)"
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Impossible d'envoyer un mail\n"
-"  Votre rapport n'a pas �t� envoy�\n"
-"   Veuillez configurer ��sendmail��"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Liste des paquetages � installer"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Erreur pendant l'envoi par FTP.\n"
-"  Veuillez corriger votre configuration FTP"
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Veuillez choisir les donn�es � restaurer..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Veuillez choisir le support de sauvegarde..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Veuillez choisir les donn�es � sauvegarder..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"La configuration de sauvegarde n'est pas encore d�finie. \n"
-"Veuillez cliquer sur ��Configuration par assistant��, ou ��Configuration "
-"manuelle��"
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "En d�veloppement ... veuillez patienter."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Sauvegarde des fichiers syst�mes..."
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Sauvegarde des comptes utilisateurs..."
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Sauvegarde des autres fichiers ou dossiers..."
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "TOTAL�:"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "Envoi par FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Envoi des fichiers..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Liste � include sur le CDR"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Veuillez taper la vitesse de gravure�:"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-"Veuillez entrer l'emplacement de votre graveur (bus,id,lun)\n"
-"(d�tecter avec ��cdrecord -scanbus��. Par exemple�: 0,1,0 )"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Veuillez v�rifier si vous voulez Inclure l'install boot sur le CD"
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Sauvegarder � partir de la configuration d�finie"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Voir la configuration de sauvegarde"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Configuration par assistant"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Configuration manuelle"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Sauvegarder�!"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"description des options�:\n"
-"\n"
-" � cette �tape, Drakbackup vous permet de changer�:\n"
-"\n"
-" - Le mode de compression�:\n"
-"    \n"
-"      Si vous cochez la compression bzip2, vous compresserez\n"
-"      mieux qu'avec gzip (de 2 � 10 %).\n"
-"      Cette option n'est pas choisie par d�faut\n"
-"      parce qu'elle est beaucoup plus lente.\n"
-" \n"
-" - Le mode de mise-�-jour:\n"
-"\n"
-"      Cette option mets � jour votre sauvegarde, mais\n"
-"      n'est pas vraiment utile car vous devez la\n"
-"      d�compresser avant de la mettre � jour.\n"
-"      \n"
-" - le mode .backupignore�:\n"
-"\n"
-"      Comme avec CVS, Drakbackup va ignorer les r�f�rences\n"
-"      incluses dans les fichiers .backupignore de chaque dossier.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Certaines erreurs lors de l'envoi de mails peuvent �tre caus�es par\n"
-" une mauvaise configuration de postfix. Pour le r�soudre, vous devez\n"
-" configurer le nom de machine ou de domaine dans /etc/postfix/main.cf.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"description des options�:\n"
-"\n"
-" - Sauvegarde des fichiers syst�mes�:\n"
-"       \n"
-"\tCette option vous permet de sauvegarder votre dossier /etc,\n"
-"\tqui contient tous les fichiers de configuration. Faites attention\n"
-"\tpendant la restauration de ne pas �craser�:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Sauvegarde des comptes utilisateurs�:\n"
-"\n"
-"\tCette option vous permet de choisir les utilisateurs \n"
-"\t� sauvegarder.\n"
-"\tPour pr�server l'espace disque, il est recommand�\n"
-"\tde ne pas inclure les dossier ��cache�� des navigateurs.\n"
-"\n"
-" - Sauvegarde des autres fichiers�: \n"
-"\n"
-"\tCette option vous permet d'ajouter d'autres donn�es\n"
-"\t� sauvegarder. Pour l'instant il n'est pas possible de faire\n"
-"\tune sauvegarde incr�mentale avec cette option.\t\t\n"
-" \n"
-" - Sauvegardes incr�mentales:\n"
-"\n"
-"\tLa sauvegarde incr�mentale est l'option la \n"
-"\tplus puissante pour la sauvegarde. Elle vous permet \n"
-"\tde tout sauver la premi�re fois, puis seulement les \n"
-"\tchangements les fois suivantes.\n"
-"\tAinsi vous serez capable de restaurer les donn�es\n"
-"\tcorrespondant � n'importe quelle sauvegarde pr�c�dente.\n"
-"\t\n"
-"\tSi vous n'avez pas s�lectionn� cette option, toutes\n"
-"\tvos sauvegardes pr�c�dentes sont pr�alablement �ffac�es.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"description de la restauration�:\n"
-" \n"
-"Seule la date de sauvegarde choisie la plus r�cente sera utilis�e, car avec\n"
-"le mode incr�mental, toutes les sauvegardes pr�c�dentes doivent �tre "
-"restaur�es.\n"
-"\n"
-"Donc si vous ne voulez pas restaurer un utilisateur, d�cochez toutes ses "
-"cases\n"
-"\n"
-"Sinon, vous ne pouvez en choisir qu'une\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft par DUPONT S�bastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Ce programme est un logiciel libre�: vous pouvez le redistribuer\n"
-"et/ou le modifier selon les termes de la ��GNU General Public\n"
-"License��, tels que publi�s par la ��Free Software Foundation��; soit\n"
-"la version 2 de cette licence ou (� votre choix) toute version\n"
-"ult�rieure.\n"
-"\n"
-"Ce programme est distribu� dans l'espoir qu'il sera utile, mais\n"
-"SANS AUCUNE GARANTIE, ni explicite ni implicite; sans m�me les\n"
-"garanties de commercialisation ou d'adaptation dans un but sp�cifique.\n"
-"Se r�f�rer � la ��GNU General Public License�� pour plus de d�tails.\n"
-"\n"
-"Vous devriez avoir re�u une copie de la ��GNU General Public License��\n"
-"en m�me temps que ce programme; sinon, �crivez � la ��Free Software\n"
-"Foundation��, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Description:\n"
-"\n"
-"  Drakbackup sert � sauvegarder votre syst�me.\n"
-"  Pendant sa configuration vous pouvez s�lectionner: \n"
-"\t- des fichiers syst�mes, \n"
-"\t- des comptes utilisateur, \n"
-"\t- d'autres donn�es.\n"
-"\tou Tout votre syst�me ...  et d'autres (comme des partitions Windows)\n"
-"\n"
-"  Drakbackup vous permet de faire des sauvegarde sur:\n"
-"\t- Disque dur.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (avec autoboot, r�cup�ration and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Cartouche.\n"
-"\n"
-"  Drakbackup peut restaurer votre syst�me vers un dossier choisi\n"
-"\n"
-"  Par d�faut toute sauvegarde sera stock�e dans le\n"
-"  dossier /var/lib/drakbackup\n"
-"\n"
-"  Fichier de configuration�:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"�tape de restauration�:\n"
-"  \n"
-"  Pendant l'�tape de restauration, DrakBackup va retirer \n"
-"  votre dossier d'origine et v�rifier que tous les \n"
-"  fichiers de sauvegarde ne sont pas corrompus. Il est recommand� \n"
-"  de faire une derni�re sauvegarde avant restauration.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"description des options�:\n"
-"\n"
-"Attention en utilisant la sauvegarde par FTP, car seulement \n"
-"les sauvegardes d�j� construites sont envoy�es vers le serveur.\n"
-"Ainsi, pour le moment, vous devez faire une sauvegarde sur disque dur\n"
-"avant de l'envoyer vers le serveur.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Probl�mes de restauration�:\n"
-"\n"
-"Avant l'�tape de restauration, Drakbackup va v�rifier tous vos\n"
-"fichiers de sauvegarde. Les dossiers originaux seront effac�s\n"
-"et vous allez perdre toutes vos donn�es. Il est important de \n"
-"faire les choses avec pr�caution et de ne pas modifier � la main\n"
-"les fichiers de sauvegarde.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Description:\n"
-"\n"
-"  Drakbackup sert � sauvegarder votre syst�me.\n"
-"  Pendant sa configuration vous pouvez s�lectionner: \n"
-"\t- des fichiers syst�mes, \n"
-"\t- des comptes utilisateur, \n"
-"\t- d'autres donn�es.\n"
-"\tou Tout votre syst�me ...  et d'autres (comme des partitions Windows)\n"
-"\n"
-"  Drakbackup vous permet de faire des sauvegarde sur:\n"
-"\t- Disque dur.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (avec autoboot, r�cup�ration and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Cartouche.\n"
-"\n"
-"  Drakbackup peut restaurer votre syst�me vers un dossier choisi\n"
-"\n"
-"  Par d�faut toute sauvegarde sera stock�e dans le\n"
-"  dossier /var/lib/drakbackup\n"
-"\n"
-"  Fichier de configuration�:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"�tape de restauration�:\n"
-"  \n"
-"  Pendant l'�tape de restauration, DrakBackup va retirer \n"
-"  votre dossier d'origine et v�rifier que tous les \n"
-"  fichiers de sauvegarde ne sont pas corrompus. Il est recommand� \n"
-"  de faire une derni�re sauvegarde avant restauration.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "L'installation de %s a �chou� pour la raison suivante�:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Chercher les polices install�es"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "D�s�lectionner les polices install�es"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "Parcourir toutes les polices"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "aucune fonte trouv�e"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "termin�"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "impossible de trouver des polices dans vos disques"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "R�s�lectionnez des polices correctes"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "impossible de trouver des polices.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Chercher des polices dans la liste des install�es"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Copie des fontes"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installation de polices ��True Type��"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "Veuillez patienter pendant ��ttmkfdir��"
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Installation ��True Type�� termin�e"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Conversion de polices"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "cr�ation de type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Inscription dans ghoscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "Conversion de polices ��True Type��"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "Conversion de polices ��pfm��"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Supprimer les fichiers temporaires"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Relancer le serveur de polices"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Supprimer les fichiers de polices"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "red�marrage du serveur de fonte"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Avant d'installer des polices de caract�res, assurez-vous que vous avez\n"
-"les permissions de les utiliser et de les installer sur votre syst�me. \n"
-"\n"
-"- Vous pouvez installer les polices par la voie habituelle. Dans de rares "
-"cas,\n"
-"des polices bogu�es peuvent bloquer votre serveur d'affichage XFree."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Importation de polices"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "R�cup�rer les polices de Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "D�sinstaller des polices"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Options avanc�es"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Liste des polices"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Choisissez les applications qui supporteront ces polices"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Imprimante g�n�rique"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "S�lectionnez les polices ou dossiers et cliquez sur ��Ajouter��"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Installe la liste"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "Cliquez ici si vous �tes s�r"
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "Ici sinon"
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "D�s�lectionne tout"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "S�lectionne tout"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "D�sinstalle la liste"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Tests initiaux"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Copier les polices sur votre syst�me"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Installe et convertit des polices"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Post-installation"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Retirer des polices de votre syst�me"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Post-d�sinstallation"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Partage de la connexion internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Le partage de la connexion internet est activ�"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuration du partage de la connexion � l'internet a d�j� �t�\n"
-"effectu�e. Elle est actuellement activ�e.\n"
-"\n"
-"Que voulez-vous faire�?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "d�sactiver"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "ne rien faire"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "reconfigurer"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "D�sactivation des serveurs..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Le partage de la connexion � l'internet est maintenant d�sactiv�."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Le partage de la connexion � l'internet est d�sactiv�"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuration du partage de la connexion � l'internet a d�j� �t�\n"
-"effectu�e. Elle est actuellement d�sactiv�e.\n"
-"\n"
-"Que voulez-vous faire�?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "activer"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Activation des serveurs..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Le partage de la connexion internet est maintenant activ�."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Votre ordinateur peut �tre param�tr� afin de partager sa connexion "
-"internet.\n"
-"Avec cette fonctionnalit�, d'autres ordinateurs sur votre r�seau local "
-"pourront utiliser la connexion internet de cet ordinateur.\n"
-"\n"
-"Veuillez noter que vous avez besoin d'une carte r�seau d�di�e � votre r�seau "
-"local."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (utilisant le module %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Aucune carte r�seau n'est pr�sente dans votre syst�me"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Aucune carte r�seau n'a �t� d�tect�e sur votre syst�me. Veuillez utiliser "
-"l'outil de configuration du mat�riel."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Carte r�seau"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Une seule carte r�seau est configur�e sur votre syst�me�:\n"
-"\n"
-"%s\n"
-"\n"
-"Je vais configurer votre r�seau local avec cette carte r�seau."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Veuillez choisir quelle carte r�seau sera connect�e � votre r�seau local"
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Interface r�seau d�j� configur�e"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Attention, la carte r�seau (%s) est d�j� configur�e.\n"
-"\n"
-"D�sirez-vous une reconfiguration automatique�?\n"
-"\n"
-"Vous pouvez le faire manuellement, mais vous devez savoir ce que vous faites."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Reconfiguration automatique"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Montrer la configuration actuelle"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Configuration actuelle de ��%s���:\n"
-"\n"
-"R�seau�: %s\n"
-"Adresse IP�: %s\n"
-"Attribution de l'adresse�: %s\n"
-"Pilote�: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Je peux conserver votre configuration actuelle, et supposer que vous avez "
-"d�j�\n"
-"configur� un serveur DHCP�; dans ce cas veuillez v�rifier que j'ai "
-"correctement\n"
-"lu l'adresse du r�seau de Classe C que vous utilisez pour votre r�seau "
-"local�;\n"
-"je ne le reconfigurerai pas et je ne toucherai pas � la configuration de "
-"votre\n"
-"serveur DHCP.\n"
-"\n"
-"Sinon, je peux reconfigurer votre interface et (re)configurer un serveur "
-"DHCP.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "R�seau Local de class C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "Adresse IP du serveur DHCP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Re-configurer l'interface et le serveur DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Le r�seau local ne finissait pas par `.0', j'abandonne."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Conflit potentiel d'adresses du r�seau local trouv� dans la configuration de "
-"%s�!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Configuration du Firewall d�tect�e"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Attention�! Une configuration existante du Firewall a �t� d�tect�e. Vous "
-"devrez peut-�tre modifier la configuration manuellement apr�s l'installation."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Configuration en cours..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configuration des scripts, installation des logiciels, d�marrage des "
-"serveurs..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Des probl�mes sont apparus en installant le paquetage %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Tout a �t� configur�.\n"
-"Vous pouvez maintenant partager votre connexion internet avec d'autres "
-"ordinateurs sur votre r�seau local, en utilisant la configuration r�seau "
-"automatique (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"La configuration a d�j� �t� effectu�e, mais elle est actuellement d�sactiv�e."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"La configuration a d�j� �t� effectu�e, et elle est actuellement activ�e."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Le partage de la connexion internet n'a encore jamais �t� configur�."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configuration du partage de la connexion internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Bienvenue dans l'utilitaire de partage de connexion internet�!\n"
-"\n"
-"%s\n"
-"\n"
-"Cliquez sur Configurer pour lancer l'assistant de configuration."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuration du r�seau (%d cartes r�seaux)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil�: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Effacer le profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil � effacer�:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nouveau profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Nom du profil � cr�er (le nouveau profil est cr�� comme une copie du profil "
-"courant�:"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nom de machine�: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Acc�s internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Type�:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Passerelle�:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interface�:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "�tat�:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Veuillez patienter"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configurer l'acc�s � l'internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configuration LAN (r�seau local)"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Pilote"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocole"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "�tat"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configurer le r�seau local..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Cliquez ici pour lancer l'assistant ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistant..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Appliquer"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Veuillez patienter... mise en place de la configuration"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Connect�"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Non connect�"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Se connecter..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Se d�connecter..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Attention, une autre connexion internet a �t� d�tect�e, peut-�tre utilisant "
-"votre r�seau"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Vous n'avez aucune interface r�seau configur�e.\n"
-"Vous pouvez en configurer une en cliquant sur ��Configurer��"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configuration du LAN (r�seau local)"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Carte r�seau %s�: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocole d'amor�age"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Lancer au d�marrage"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "activer maintenant"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "d�sactiver maintenant"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Cette interface n'a pas encore �t� configur�e.\n"
-"Lancez l'assistant de configuration dans la fen�tre principale"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Vous n'avez aucune connection internet.\n"
-"Vous pouvez en cr�er une en cliquant sur ��Configurer��"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configuration de la connexion internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configuration de la connexion internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Type de connexion�: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Param�tres"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Passerelle"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Carte ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Mise en place du niveau de s�curit�"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centre de contr�le"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Choisissez l'outil que vous voulez utiliser"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canada (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (hertzien)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (cable ou HRC)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Chine (hertzien)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japon (hertzien)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japon (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Europe de l'est"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlande"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Europe de l'ouest"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australie"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nouvelle Z�lande"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Afrique du Sud"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentine"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"SVP,\n"
-"Veuillez choisir votre r�gion et votre norme de TV"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Norme TV�:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Zone�:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Recherche des canaux de t�l�vision en cours ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Recherche des canaux de t�l�vision"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "Aucune carte TV d�tect�e�!"
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Aucune carte TV n'a �t� d�tect�e sur votre ordinateur. Veuillez v�rifier qu'une carte TV/Vid�o support�e par Linux est correctement branch�e.\n"
-"\n"
-"\n"
-"Vous pouvez visiter notre base de donn�es de support mat�riel �:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "utilisation�: keyboarddrake [--expert] [clavier]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Veuillez choisir votre type de clavier."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Voulez-vous que la touche BackSpace retourne Delete en console�?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Changer de c�d�rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Changement de c�d�rom\n"
-"\n"
-"Veuillez ins�rer le c�d�rom d'Installation dans votre lecteur.\n"
-"Ceci fait, cliquez sur ��OK��.\n"
-"\n"
-"Si vous ne le poss�dez pas, cliquez sur ��Annuler�� pour annuler la mise � "
-"jour."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Impossible de d�marrer la mise � jour�!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Les changements ont �t� effectu�s mais ne seront effectifs qu'apr�s votre "
-"d�connection"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "N'afficher que les pour les jours s�lectionn�s"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fichier/_Nouveau"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fichier/_Ouvrir"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fichier/_Enregistrer"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fichier/Enregistrer _Sous"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fichier/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Options"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Options/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Aide"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Aide/_A propos..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Utilisateur"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Messages"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Explications sur les Outils Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "chercher"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Un outil pour voir vos fichiers journaux"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Param�tres"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "contenant"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "mais ne contenant pas"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Choisir le fichier"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Calendrier"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Contenu du fichier"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Alerte mail/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "s'il vous pla�t attendez, examen du fichier�: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Configuration des alertes mail/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Bienvenue dans l'utilitaire de configuration mail/SMS.\n"
-"\n"
-"Vous allez pouvoir configurer ici vos les alertes syst�mes.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "configuration des services"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Vous recevrez une alerte si l'un des services s�lectionn�s ne tourne plus"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "chargement des param�tres"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Vous recevrez une alerte si la charge machine d�passe cette valeur"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "configuration des alertes"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Configurer les moyens de vous alerter"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Enregistrer sous..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Veuillez choisir le type de votre souris."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "aucun p�riph�rique USB s�rie trouv�\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "�muler le troisi�me bouton�?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s trouv� sur %s, configurer�?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "S�lectionnez un scanner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Ce scanner %s n'est pas support�"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"Scannerdrake n'a pas r�ussi � d�tecter votre scanner %s.\n"
-"Veuillez s�lectionner le p�riph�rique sur lequel votre scanner est branch�"
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "choisissez le p�riph�rique"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Ce scanner (%s) doit �tre configur�e par printerdrake.\n"
-"Vous pouvez lancer printerdrake depuis le Centre de Contr�le Mandrake dans "
-"la section Mat�riel"
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Votre scanner %s a �t� configur�.\n"
-"Vous pouvez maintenant scanner des documents en utilisant ��XSane�� � partir de Multim�dia/Graphisme dans le menu des applications."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Configuration du Firewall"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Configuration du Firewall"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall (pare-feu)\n"
-"\n"
-"Vous avez d�j� configur� un firewall.\n"
-"Cliquez sur ��Configurer�� pour changer ou supprimer le firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Pare-feu (Firewall)\n"
-"\n"
-"Cliquez sur Configurer pour mettre en place un pare-feu standard"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Choix de la langue"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Classe d'installation"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "D�tection des disques durs"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configuration de la souris"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Choix du clavier"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "S�curit�"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Syst�mes de fichiers"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatage des partitions"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Choix des paquetages"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installation du syst�me"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Ajout des utilisateurs"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configuration du r�seau"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configuration des services"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Programme d'amor�age"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Disquette d'amor�age"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configuration de X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Mise-�-jour syst�me"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Fin de l'installation"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configuration d'un mini-firewall\n"
-"\n"
-"Cela configure un firewall (pare-feu) personnel pour votre machine Mandrake "
-"Linux.\n"
-"Si vous souhaitez un firewall plus puissant ou d�di�, veuillez plut�t "
-"utiliser\n"
-"la distribution sp�cialis�e ��MandrakeSecurity��."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Nous allons maintenant vous poser des questions sur quels services vous\n"
-"souhaitez pouvoir connecter � l'internet. Veuillez r�fl�chir avec soin sur\n"
-"chacune de ces questions, car la s�curit� de votre ordinateur est\n"
-"importante.\n"
-"\n"
-"S'il vous pla�t, si vous n'utilisez par l'un de ces services,\n"
-"d�sactivez-le. Vous pouvez changer cette configuration n'importe quand, en\n"
-"red�marrant cette application�!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur web sur cette machine, que vous avez besoin de\n"
-"rendre visible depuis tout l'internet�? Si vous utilisez un serveur web\n"
-"pour seulement cette machine, vous pouvez r�pondre NON ici.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur de nom sur cette machine�? Si vous n'avez pas\n"
-"configur� un tel serveur pour donner des informations d'IP et de zone\n"
-"pour tout l'internet, veuillez r�pondre NON.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Voulez-vous permettre les connexions s�curis�es entrantes (par le\n"
-"protocole ssh)�? C'est un remplacement de telnet que vous pouvez utiliser\n"
-"pour vous connecter sur une machine distante. Si vous utilisez telnet en\n"
-"ce moment, vous devriez vraiment passer � ssh. telnet n'est pas encrypt�\n"
-"-- par exemple des pirates peuvent voler votre mot de passe. ssh est\n"
-"encrypt� et interdit les �coutes clandestines (eavesdropping)."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Voulez-vous permettre les connexions entrantes en telnet�?\n"
-"C'est tr�s dangereux, comme nous l'avons expliqu� dans l'�cran pr�c�dent.\n"
-"Nous recommandons fortement de r�pondre NON ici et d'utiliser ssh �\n"
-"la place de telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Utilisez-vous un serveur FTP, que vous voulez visible depuis l'internet�?\n"
-"Si c'est le cas, nous recommandons fortement de ne l'utiliser que\n"
-"pour les transferts en mode anonyme. Tous les mots de passe envoy�s\n"
-"par FTP peuvent �tre vol�s par des pirates, car FTP n'utilise pas\n"
-"non plus d'encryption pour transf�rer les mots de passe.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur de mail (courrier �lectronique)�? Si vous\n"
-"envoyez des messages avec pine, mutt ou d'autres clients mail texte,\n"
-"vous en utilisez probablement un. Sinon, vous devriez r�pondre NON.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur POP ou IMAP�? C'est utilis� pour\n"
-"h�berger des comptes mail qui ne sont pas bas�s sur des interfaces\n"
-"web.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Vous utilisez un noyau en version 2.2. Si votre adresse IP r�seau est\n"
-"attribu�e automatiquement par un ordinateur sur votre r�seau (adresse\n"
-"dynamique), nous avons besoin d'autoriser cela. Est-ce le cas�?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Est-ce que l'heure de votre ordinateur est synchronis�e avec un\n"
-"autre ordinateur�? La plupart du temps, c'est utilis� par des\n"
-"soci�t�s de taille moyenne ou grande, bas�es sur Unix/Linux,\n"
-"pour synchroniser les heures de connexion, etc. Si vous ne\n"
-"faites pas partie d'une telle soci�t� et n'avez pas entendu\n"
-"parler de ce probl�me, vous n'avez probablement pas besoin\n"
-"de ce service."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"La configuration est termin�e. Devons nous �crire ces changements sur "
-"disque�?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "�chec de l'ouverture de %s�: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "�chec de l'ouverture de %s en �criture�: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Non, je n'ai pas besoin de DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Oui, j'ai besoin de DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Non, je n'ai pas besoin de NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Oui, j'ai besoin de NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Ne pas sauver"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Sauver et Quitter"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Assisatant de Configuration du Firewall"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Non (en bloquer l'acc�s depuis le r�seau)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Oui (autoriser ceci � traverser le firewall)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Veuillez patientez... V�rification des paquetages install�s"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"�chec lors de l'installation des paquetages n�cessaires�: %s et Bastille.\n"
-"Essayez de les installer manuellement."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ordinateur r�seau (client)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Serveur NFS, serveur SMB, serveur Proxy (mandataire), serveur SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Bureautique"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Station de travail Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Outils pour votre Palm Pilot ou votre Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Station de travail"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Routeur"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Serveur de Nom et serveur d'Information R�seau"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programmes pour la bureautique�: traitements de texte (kword, abiword), "
-"tableurs (kspread, gnumeric), visualiseur pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Outils audio�: lecteurs mp3 ou midi, mixeurs, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Livres et Howto's sur Linux et le Logiciel Libre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Station de travail KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multim�dia - Vid�o"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Utilitaires pour le courrier �lectronique, les news, le web, le transfert de "
-"fichiers, les discussions en ligne"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Base de Donn�es"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Serveurs de bases de donn�es PostgreSQL ou MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Outils pour faciliter la configuration de votre ordinateur"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multim�dia - Son"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitaires"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentation"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Utilitaires console"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Serveur de courrier Postfix, serveur de news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multim�dia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuration"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Plus d'Environnements de Bureau (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Le K Desktop Environement, l'environnement de bureau de base avec sa "
-"collection d'outils"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Environnement graphique"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache et Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Outils pour cr�er et graver des CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Station de travail bureautique"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Serveur"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programmes de graphisme comme The gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-"Biblioth�ques de d�veloppement C et C++, programmes et fichiers d'en-t�te"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Serveur r�seau"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Jeux"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Lecteurs et �diteurs vid�o"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multim�dia - Graphisme"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-"Programmes de divertissement�: jeux d'arcade, de plateaux, de strat�gie, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Ensemble d'outils pour lire ou envoyer des courriers �lectronique (pine, "
-"mutt), des news (tin), et pour naviguer sur le Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivage, �mulateurs, surveillance"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Gestion Financi�re"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Un environnement de bureau avec un ensemble d'applications et d'outils "
-"intuitifs"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients pour diff�rents protocoles dont ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Passerelle internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programmes pour jouer/�diter du son et de la vid�o"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Autres Environnements de Bureau"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "�diteurs, interpr�teurs, utilitaires fichiers, terminaux"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmes pour g�rer votre finance, comme gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gestionnaire d'Information Personnel"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multim�dia - Gravage de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Applications scientifiques"
diff --git a/perl-install/share/po/ga.po b/perl-install/share/po/ga.po
deleted file mode 100644
index 30649a12a..000000000
--- a/perl-install/share/po/ga.po
+++ /dev/null
@@ -1,11023 +0,0 @@
-# Irish translations for DrakX, the Mandrake Installer.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Irish Linux Users Group <ilug@linux.ie>, 1999
-#
-# Credits where due:
-#   Proinnsias Breathnach <breatpro@dublin.ml.com-nospam>
-#   Donncha �'Caoimh <donncha.ocaoimh@tradesignals.com-nospam>
-#   Barra �'Caoimh <Care of donncha.ocaoimh@tradesignals.com-nospam>
-#   John McDonnell <johnmc@student.nuigalway.ie-nospam>
-#   <Alastair McKinstry <mckinstry@computer.org>
-# Who've all contributed so far. 
-# Proinnsias 16-Dec-1999
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 1999-12-16 10:33+0100\n"
-"Last-Translator: Proinnsias Breathnach <breatpro@dublin.ml.com>\n"
-"Language-Team: Gaeilge <ga@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Cumraigh gach cinn ar leith"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Cumraigh carta \"%s\" (%s) amhain"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Cumra�ochti gach cinn iolrach"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Carta Grafach"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Roghnaigh carta grafachach"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Roghnaigh freastala� X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X freastala�"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Roghnaigh freastala� X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X freastala�"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "Freastala� XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s le luadghear� crua-earra� 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Freastala� XFree %s le luasghear�  crua-earra� 3D TRIALACH"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Cumra�ocht XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Roghnaigh an m�id cuimhne at� id' charta grafachach"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Roghnaigh cumra�ocht an freastala�"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Roghnaigh sc�ile�n"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Sc�ile�n"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "R�ta athnuachana cothrom�nach"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "R�ta athnuachana ingearach"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "N�l aon sc�ile�n cumraithe"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "N�l aon carta grafachach cumraithe"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "N�l aoin r�iteach cumraithe"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "An bhfuil t� ag iarraidh an cumra�ocht a thrial?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Trialaigh an cumra�ocht"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"bain trial as roinnt paraim�adair a athr�"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Tharla Earr�id:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Ag �al� i %d siocand"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "An bhfuil seo ceart?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Tharla earr�id, bain trial as roinnt paraim�adair a athr�"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "R�iteach"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Roghnaigh R�iteach agus an m�id dath"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Carta Grafach: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Freastala� XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "M�r"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ceart go Leor"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "M�d Saineola�"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Taisp�an gach ceann"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "R�iteacha�"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Leagan amach eocharchl�ra: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Cine�l luch�g: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Gaireas luch�ige: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Sc�ile�n: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sc�ile�n HorizSync: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Sc�ile�n VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Carta Grafach: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Carta Grafach: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Cuimhne grafach: %s kb\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, fuzzy, c-format
-msgid "Color depth: %s\n"
-msgstr "Sc�ile�n VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "R�iteacha�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Freastala� XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Tiom�na� XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Ag ullmh� cumra�ocht X-Windows"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "C�ard a theasta�onn uait a dh�anamh?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Athraigh Sc�ile�n"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Athraigh carta grafach"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Athraigh cumra�ocht an freastala�"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Athraigh R�iteach"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Taispe�n Eolas"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Bain trial as ar�s"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "�alaigh"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, fuzzy, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr "Coimead an cumra�ocht IP at� ann"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ag t�s"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Is f�idir linn do r�omhaire a shocr� le X a thosn� i ndhiadh boot�il.\n"
-"An dteasta�onn uait go dtosn�far X nuair a aththosn�tear an r�omhaire?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "�irigh as le do thoil agus Crtl-Alt-BackSpace a �s�id"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 dath (8 giot�in)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 m�le dath (15 giot�in)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 m�le dath (16 giot�in)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milli�n dath (24 giot�in)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 billi�n dath (32 giot�in)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB n� n�os m�"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Gn�th VGA, 640x480 ag 60Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 ag 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Cin�al 8514, 1024x768 ag 87 Hz Idirdhuillith (gan 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ag 87 Hz Idirdhuillithe, 800x600 ag 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "SVGA Leathnaithe, 800x600 ag 60 Hz, 640x480 ag 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA Neamh-idirdhuillithe, 1024x768 ag 60 Hz, 800x600 ag 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA d'�rd minic�ocht, 1024x768 ag 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Sc�ile�n ilmhinic�ocht a bhfuil in ann do 1280x1024 ag 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Sc�ile�n ilmhinic�ocht a bhfuil in ann do 1280x1024 ag 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Sc�ile�n ilmhinic�ocht a bhfuil in ann do 1280x1024 ag 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Sc�ile�n a bhfuil in ann do 1600x1200 ag 70Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Sc�ile�n a bhfuil in ann do 1600x1200 ag 76Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr ""
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr ""
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Roghnaigh rang feisti�"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr ""
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Feisti� LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO le chl�r teacs"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO le Chl�r Graphaice"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Boot�il as DOS/Windows (loadin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Pr�omhroghanna boot�il"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "R�omhchlar Tosnaithe a �s�id "
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Feisti� c�d tosnaithe"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Gaireas boot�il"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr ""
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "M�d f�s"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr ""
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Pasfhocal"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Pasfhocal (ar�s)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Teorannaigh roghanna l�ne ord�"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "teorannaigh"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Glan /tmp nuair a thosnaigh an cor�is"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr ""
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Tabhair na M�id Cuimhne as MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Aththrialaigh"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "N� mar a ch�ile na pasfhocail"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Sc�al Tosn�"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "OS Loiceadh?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Suim"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Cr�ochnithe"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Athraigh"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "C�n sort iontr�il a suimigh do"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "CO Eile (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "CO Eile (MunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "CO Eile (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Iomha"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "L�amh-Scr�obh"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Table"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Baolach"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Lip�ad"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Gn�th"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "M�id-Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "GanBhide�"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Scrios iontr�il"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "N�l ceadaigh an lip�ad folamh ann"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "N�l aon ranna agat!"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Is ann cheana don ainm �s�ideora seo"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fuair %s %s comh�adan"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "An bhfuil ceann eile agat?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "An bhfuil comh�adan %s agat?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "N�l"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "T�"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Le�mh an t-eolais crua-earra"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Ag feist�il tiomana� do %s, carta %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(mod�l %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr ""
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr ""
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Cumraigh roghanna"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Roghachais mod�il:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr ""
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "T� an pasfhocal seo ro-shimpl�"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr ""
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Is ann cheana don ainm �s�ideora seo"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Suimigh �s�ideoir"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr ""
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "F�or ainm"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Ainm �s�ideora"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Blaosc"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Dealbh"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Uath-Logann"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Is f�idir linn do r�omhaire a shocr� le X a thosn� i ndhiadh boot�il.\n"
-"An dteasta�onn uait go dtosn�far X nuair a aththosn�tear an r�omhaire?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Roghnagih an �s�idoer gne�s:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Roghnaigh an Bainist�oir Fhuinneoga a �s�sd:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Gach Rud"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Suimigh �s�ideoir"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Socraithe"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "Ag Tosnaigh CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cealaigh"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr ""
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Bocht"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "�rd"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "�rd"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paran�id"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Roghnaigh liebh�al sl�nd�il"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Roghnaigh liebh�al sl�nd�il"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Roghnaigh cumra�ocht an freastala�"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-# FIXME
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "F�ile go GRUB, an roghn�ir Chor�is "
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Deasc"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Cl�r Tosn�"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Cumra�ocht St�l Tosn�"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/C_omhad"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Comhad/_Ealu"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>E"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Sc�ile�n St�l Nua"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Sc�ile�n Tradisi�nta"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monat�ir Tradisi�nta Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Tosnaigh Aurora "
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "M�d Lilo/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "M�d Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Cumraigh"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "M�d Coras"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Ceart go Leor"
-
-#: ../../bootlook.pm_.c:229
-#, fuzzy, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Earr�id ag oscailt %s do scr�obh: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d noim�aid"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 noim�ad"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d siocand"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "N� f�idir liom rann eile a cur isteach"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Fraince"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belg�iris"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Gearm�inis"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Greic�s"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Ioruais"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Amharc"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Iod�lais"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "srathach"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "L�igh go curamach"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Earr�id"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Dra�odoir"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Roghnaigh gn�omh"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"T� rann m�r FAT amh�in agat.\n"
-"Molaim dhuit an rann sin a athmh�ad� ar dt�s\n"
-"(roghnaigh an rann agus br� ar \"Athm�idigh\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Roghnaigh rann le do thoil"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Sonra�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Malairte"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Folamh"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Eile"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Cine�l c�rais-comhadlanna"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Cruthaigh"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Cine�l"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Scr�os"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Roghnaigh gn�omh"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Cruthaigh rann nua"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Leas�"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Lean ar aghaidh ar aon n�s?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "�alaigh gan sabh�il"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "�alaigh gan an cl�r-ranna a scr�obh?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "An bhfuil t� ag iarraidh an cumra�ocht a thrial?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Glan gach ceann"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Eolas R-Phost"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "T� na ranna pr�ofa uilig �s�idthe"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "N� f�idir liom rann eile a cur isteach"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Le breis ranna a bheith agat, dealaigh ceann amh�in le bheith in ann "
-"ranns�nithe a cruth�"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Scriobh cl�r-ranna"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Scriobh cl�r-ranna"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Scriobh cl�r-ranna"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Roghnaigh Comhad"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"N�l an m�id c�anna ar an rann c�ltaca\n"
-"Lean ar aghaidh ar aon n�s?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Rabhadh"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Cur diosca flapach sa dioscthiomant\n"
-"Caillfear gach sonra ar an dhiosca seo"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Ag iarraidh an cl�r-ranna a tarrth�il"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Eolas R-Phost"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Roghnachais"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Athm�idigh"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Bog"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Form�idigh"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Cur le RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Cur le LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Bain � RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Bain � RAID"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Athraigh RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Cruthaigh rann nua"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Teasc�n tosasch: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "M�id i MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Cine�l c�ras-comhadlanna:"
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Tosa�ocht: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Ag form�idi� comhad 'loopback' %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Athraigh cine�l ranna"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "C�n rann at� uait?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Ag r�omhadh teorainn na c�rais-comhadlanna FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Ag athm�ad�"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:614
-#, fuzzy
-msgid "All data on this partition should be backed-up"
-msgstr "caillfear gach sonra ar an rann seo"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Roghnaigh an m�id nua"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "M�id i MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "C�n diosca ag a dteasta�onn uait � a bhogadh?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Teasc�n"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "C�n tesc�n ag a dteasta�onn uait � a bhogadh?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Ag bogadh"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Ag bogadh rann..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Roghnaigh RAID at� ann le m�ad�"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nua"
-
-#: ../../diskdrake/interactive.pm_.c:714
-#, fuzzy
-msgid "Choose an existing LVM to add to"
-msgstr "Roghnaigh RAID at� ann le m�ad�"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "ainm LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "F�or ainm"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Roghachais mod�il:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "gaireas"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "leibh�al"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "m�id smut�n"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "C�n sort rann� at� ort?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"N�l m� sasta /boot a cruth� comh fada sin isteach sa diosca, (ar sorc�ir > "
-"1024).\n"
-"M� t� t� ag �s�id LILO n� oibr�idh s�, n� n�l /boot uait muna n-�s�ideann t� "
-"LILO"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"T� an rann at� roghnaithe agat don fr�amh (/) suitithe i ndhiadh an 1024�\n"
-"sorc�ir ar an dhiosca, agus n�l aon rann /boot agat.\n"
-"M� t� t� chun LILO a �s�id, beidh ort rann /boot a cruth� ar ball."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Scr�obhfar cl�r diosca %s go dhiosca!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Beidh ort an r�omhaire a aththosn� sula nd�anfar an athr�"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Ag form�idi�"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Ag form�idi� comhad 'loopback' %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Ag form�idi� rann %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "teip ar 'mkraid'"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Cruthaigh rann nua"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Cruthaigh rann nua"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "R�iteacha�: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Gaireas: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Litir Dioscthiom�nt DOS: %s (buile faoi thuraim)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Cine�l: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ainm: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "T�s: teasc�n %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "M�id: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s teasc�in"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Sorc�ir %d go sorc�ir %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Form�idithe\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Neamhform�idithe\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Rann tosaithe de ghn�th\n"
-"    (do thosn� MS-DOS, n� lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Leibh�al %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "M�id smut�n %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Diosca� RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "M�id: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "C�imseasamh: %s sorc�ir, %s ceann, %s teasc�n\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-#, fuzzy
-msgid "Info: "
-msgstr "Eolas"
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Diosca� LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Cin�al tabla rann: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ar bh�s %d, id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Roghnachais: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Cine�l c�ras-comhadlanna:"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "N� mar a ch�ile na pasfhocail"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Athraigh cine�l ranna"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Roghnaigh rann le do thoil"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "freastala� DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "Form�idi� %s de %s teipithe"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "n�l a fhios agam conas %s a form�idi� go %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simpl�"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "Freastala�"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr ""
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Earr�id ag oscailt %s do scr�obh: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Tharla earr�id - n� fhuaireadh aon gaireas ar a bhf�adfa� c�rais-comhadlanna "
-"nua a cruthu. Ba ch�ir duit do chuid crua-earra� a seice�il le c�is an fadhb "
-"a aimsi�"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "N�l aon ranna agat!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Earr�id ag l�amh comhad %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"N�l aon ranna malairte agat\n"
-"\n"
-"x1Lean ar aghaidh ar aon n�s?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "�s�id sp�s saor"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:102
-#, fuzzy
-msgid "There is no existing partition to use"
-msgstr "Ag iarraidh an cl�r-ranna a tarrth�il"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "C�n rann a bhfuil t� ag iarraidh �s�id mar rann fr�amhach"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Roghnaigh an m�id nua"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "M�id i MB do Rhann Fr�amhach:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "M�id i MB do rhann malairte:"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:130
-#, fuzzy
-msgid "Computing Windows filesystem bounds"
-msgstr "Ag r�omhadh teorainn na c�rais-comhadlanna FAT"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "rann %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Theip ar uathathmh�ad� FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Glan diosca ina ioml�n"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Dealaigh Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "�s�id fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "N�l aon ranna agat!"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "N� f�idir liom rann eile a cur isteach"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Theip ar rann�: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Ag tosn� suas an ghr�as�n"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Ag d�nadh s�os an ghreas�n"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ta earraid ann, n�l a fhios agam conas � a cheart�.\n"
-"Lean ort, ar do phriacal f�in."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Pointe taca dublach %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "F�ilte go %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "N�l dioscthiom�nt flapach ar f�il"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Ag tosn� ar c�im `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Rann Feisti�"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Roghn� Gr�pa Pac�ist�"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "M�id ioml�n: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pac�iste m�cheart"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ainm: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Leagan: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "M�id: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "T�bhacht: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Feisti�"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Sabh�il ar dhiosca flapach"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Roghn� Gr�pa Pac�ist�"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Eirigh as Feisti�"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Ag Feisti�"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Ag meast�"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Am fagtha "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Fan tamall, ag ullmhaigh feisti�"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pac�ist�"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Ag feisti�l  pac�iste %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aontaigh"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Tarrth�il"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Lean ar aghaidh ar aon n�s?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Tharla earr�id"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "An bhfuil t� ag iarraidh an cumra�ocht a thrial?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Cead�nas"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Eocharcl�r"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "C�n leagan amach at� ar d'eocharchl�rsa"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "C�n rann feisti� at� uait?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Feisti�i/Uadgr�daigh"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Feistigh n� uasgr�daigh ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Molta"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Saineola�"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Uasgr�daigh"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Roghn� Gr�pa Pac�ist�"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "C�n cin�al luch�g at� agat?"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Gaireas luch�ige"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Cumraigh C�rta� PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Ag cumraigh IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "n�l aon ranna saora ann"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:357
-#, fuzzy, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ni f�idir liom an t�bla rainn a l�amh, t� m�chaill� ann :(\n"
-"Leanfaidh m� orm ag ceal� droch rainn"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Theip ar DiskDrake an tabla rainn a l�amh i gceart.\n"
-"Lean ort, ar do phriacal f�in!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Roghnaigh na ranna at� le form�idi�"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Rann Fr�amhach"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "C�ard � an rann fr�amhach (/) ded' ch�ras?"
-
-#: ../../install_steps_interactive.pm_.c:411
-#, fuzzy
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Beidh ort an r�omhaire a aththosn� sula nd�anfar an athr�"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Roghnaigh na ranna at� le form�idi�"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Ag form�idi� ranna"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nil dothain spas malartu chun insealbhu, chuir leis an spas"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Ag curdach do na pac�ist� at� ar f�il"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Ag c�rdach pac�ist� le h�asgr�d�"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Cr�ochnaithe (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "�osta (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Molta (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Aisig � dhiosca flapach"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Aisig � dhiosca flapach"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Roghn� Gr�pa Pac�ist�"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Sabh�il ar dhiosca flapach"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Roghnaigh pac�ist� a feisti� ..."
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Fan tamall"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Ag Ullmhaigh feisti�"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Ag feiste�il pac�iste %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Cumra�ocht Iar-feist�"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Cur isteach diosca folamh sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "C�n ceann do chrois ama"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "An bhfuil an clog cruaearrach ar GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Freastala� NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Scrios Freastala� CUPS"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Gan  Print�ir"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "An bhfuil ceann eile agat?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Coimri�"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Luch�g"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Am Cr�os"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Print�ir"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Carta ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Carta Fuaim"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Carta Telef�s"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Chomaid �iti�l"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Socraigh pasfhocal root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Gan pasfhocal"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Deimni�"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Deimni� LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Freastala� LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Deimni� NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Fearannas NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Freastala� NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Cead dioscthiom�nt flapach"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Dara dioscthiom�int flapach"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Scipe�il"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Br�n orm, n�l aon dioscthiom�nt flapach ar f�il"
-
-#: ../../install_steps_interactive.pm_.c:1212
-#, fuzzy
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Roghnaigh na ranna at� le form�idi�"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Ag Cruthaigh diosca thosnaithe"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Ag Ullmhaigh r�omhchlar thosnaithe"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-#, fuzzy
-msgid "Do you want to use aboot?"
-msgstr "C�ard a theasta�onn uait a dh�anamh?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Feistigh c�d tosnaithe"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Cur isteach diosca folamh sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1354
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "Cruthaigh flapach boot�il"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Athl�daigh"
-
-#: ../../install_steps_interactive.pm_.c:1364
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Roghn� Gr�pa Pac�ist�"
-
-#: ../../install_steps_newt.pm_.c:22
-#, fuzzy, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Feisti� Linux-Mandrake %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu ar iarraidh"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Roghnaigh gn�omh"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "R�amhioa�ocht"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Fan tamall"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Eolas"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Droch rogha, aththrialaigh\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Do rogha? (gn�s %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Do rogha? (gn�s %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Roghnachais: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "C�ard a theasta�onn uait a dh�anamh?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Do rogha? (gn�s %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Ceich�s (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Gearm�inis"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Sp�inis"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Fionlainnais"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francaigh"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Ioruais"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polainnais"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruisl�s"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "M�archl�r UK"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Me�rchl�r US"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belg�iris"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Bulg�iris"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulg�iris"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belar�isis"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Eilv�is (St�l Ghearm�nais)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Eilv�is (St�l Francaigh)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Ceich�s (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Gearm�inis (gach meachl�r marbh)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danmharghais"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (Meirice�)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Ioruais)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Meirice�)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "East�inis"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Greic�s"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ung�rais"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Cr�itis"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr ""
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr ""
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Iod�lais"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Se�painis (106 eochair)"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "M�archl�r Ch�iris"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Mheirce� Theas"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "�it"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr ""
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr ""
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "R�isis (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "R�isis (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "R�isis (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Sl�baicis (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Sl�baicis (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Table"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Me�rchl�r US"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Mearchl�r US (idirnaisi�nta)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Luch�g - Sun"
-
-#: ../../mouse.pm_.c:32
-#, fuzzy
-msgid "Logitech MouseMan+"
-msgstr "Luch�g Bus Logitech"
-
-#: ../../mouse.pm_.c:33
-#, fuzzy
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse Gn�th (PS/2)"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 Cnaipe"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Luch�g 2-cnaipe Loiceadh"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Gn�th"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rothar"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "srathach"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Luch�g Gn�th 3-cnaipe"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Luch�g MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Luch�g Logitech CC"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Luch�g Logitech (srathach, s�an cin�al C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 cnaip�"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 cnaip�"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "Ar bith"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Luch�g ar bith"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Teast�il an luch�g, le do thoil"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr ""
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "BOG DO ROTHAR!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Fionnlainnis"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "An bhfuil seo ceart?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "�s�id dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "�s�id pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "�s�id pppoe"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Roghnaigh an cl�r�adan ghr�as�n"
-
-#: ../../network/ethernet.pm_.c:93
-#, fuzzy
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "C�n cin�al luch�g at� agat?"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "n� fuaireathas c�rta gr�as�n�"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Cumraigh gr�as�n�"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "�stAinm"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Dra�od�ir Cumra�ocht Gr�as�n�"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "M�ideam ISDN seantrach"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Carta ISDN inmhe�namach"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Cumra�ocht Gr�as�n�"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "�irigh  as cumra�ocht"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Cumraigh ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Eorap (EDS11)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Trialaigh an cumra�ocht"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "C�n cin�al c at� uait?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "N�l fh�os agam"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA/ PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Tobscoir"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Lean"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "C�n sort carta ISDN at� uait?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-#, fuzzy
-msgid "Please choose which serial port your modem is connected to."
-msgstr "C�n cin�al luch�g at� agat?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Roghanna 'Dialup'"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Ainm Nasc"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Uimhir f�n"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Ainm Login:"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Script-bhunaithe"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Teirmin�al-bhunaithe"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Ainm Fearannas"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Cead Freastala� DNS"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Dara Freastala� DNS"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Cumraigh nasc ghr�as�n"
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Bainteach le hIdirl�on"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "C�n diosca ag a dteasta�onn uait � a bhogadh?"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Lean"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Cumraigh nasc ghr�as�n"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Cumraigh gr�as�n�"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Nasc na hIdirl�on agus cumra�ocht"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Cumraigh nasc ghr�as�n"
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Cumra�ocht Gr�as�n�"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Roghnagih an �s�idoer gne�s:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Cumraigh nasc ghr�as�n"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Pointe taca dublach %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Cumraigh ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Nasc LAN"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy, c-format
-msgid "detected on interface %s"
-msgstr "Cl�r�adan Gr�as�n"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Cumraigh nasc ghr�as�n"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Nasc LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Roghnaigh na ranna at� le form�idi�"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Nasc Print�ir"
-
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Do you want to start the connection at boot?"
-msgstr "An bhfuil t� ag iarraidh an cumra�ocht a thrial?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Cumra�ocht Gr�as�n�"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "An bhfuil t� ag iarraidh an cumra�ocht a thrial?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Ag cumr� gl�as gr�as�n� %s"
-
-#: ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr " (tiom�int $module)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Seoladh IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr ""
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Uath-IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "freastala� DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gaireas na hInneal Geata"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Cumraigh seach-freastala�"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Seach-HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Seach-FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Cumraigh Idirl�on"
-
-#: ../../network/tools.pm_.c:40
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "An bhfuil t� ag iarraidh an cumra�ocht a thrial?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Cumraigh nasc ghr�as�n"
-
-#: ../../network/tools.pm_.c:50
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "C�n diosca ag a dteasta�onn uait � a bhogadh?"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Cumra�ocht Idirl�on."
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ na Carta"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Cuimhne Charta (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "I/A Carta"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "I/A_0 Carta"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "I/A_1 Carta"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-#, fuzzy
-msgid "Your personal phone number"
-msgstr "Uimhir f�n"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Uimhir f�n"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "Roghanna Print�ir"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "Roghanna Print�ir"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Roghnaigh mh�archl�r"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Athraigh cine�l ranna"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Ainm Nasc"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Pasfhocal"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr ""
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Droch comhad ch�ltaca"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Earr�idh ag scr�obh comhad %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "riachtanas"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "t�bhachtach"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "an-dheas"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "deas"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "b'fh�idir"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Print�ir �iti�l"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Scr�os Print�ir"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Scrios Freastala� CUPS"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Scrios freastala� lpd"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Print�ir Gr�as�n (lpd)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Freastala� Print�ir"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Gaireas Print�ir (URI)"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Print�ir �iti�l"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Scr�os Print�ir"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Earr�idh ag scr�obh comhad %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(mod�l %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP freastala� SMP"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-#, fuzzy
-msgid " (Default)"
-msgstr "Gn�th"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "cumra�ocht"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Scrios Freastala� CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "IP freastala� SMP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Poirt"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Cumraigh ADSL"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Gan  Print�ir"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Print�ir �iti�l"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Scr�os Print�ir"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Scr�os Print�ir"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Scr�os Print�ir"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Pointe taca dublach %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Gaireas Print�ir (URI)"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Print�ir �iti�l"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "C�n cin�al luch�g at� agat?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Gaireas Print�ir (URI)"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Cumraigh Idirl�on"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Ag feisti�l  pac�iste %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Ag feisti�l  pac�iste %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "�stAinm"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Scr�os Print�ir"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Scr�os Print�ir"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Roghanna Print�ir SMB (Fuinneoga 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "freastala� �stann SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP freastala� SMP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Comh. ainm"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grupa na hOibre"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Roghanna Print�ir NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Freastala� Print�ir"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Roghanna Print�ir NetWare"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "�stainm Print�ir"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "�stainm Print�ir"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Gaireas Print�ir (URI)"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Ainm Print�ir"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Cuntas"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "�it"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Scr�os Print�ir"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "An bhfuil seo ceart?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Scr�os Print�ir"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Nasc Print�ir"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "C�n sort print�ir at� ort?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Cumraigh Idirl�on"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Cumraigh Idirl�on"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Bain trial as ar�s"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Print�ir"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Uirlis� gn�th"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "�stainm Print�ir"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Gan  Print�ir"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "D�n"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Ag d�nadh s�os an ghreas�n"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ag d�nadh s�os an ghreas�n"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Roghanna Print�ir"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Cumraigh Idirl�on"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Gan  Print�ir"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Cumraigh Print�ir"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Nasc Print�ir"
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Cumraigh gr�as�n�"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "N�l aon sc�ile�n cumraithe"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Cumraigh gr�as�n�"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Scr�os Print�ir"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "�rd"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paran�id"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Nasc Print�ir"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "C�n rann at� uait?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Cumraigh print�ir"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Ag feisti�l  pac�iste %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Roghanna Print�ir"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Cumraigh print�ir"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "An dteasta�onn uait print�ir a chumr�?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Cl�d�ir"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Cumraigh gr�as�n�"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Luch�g ar bith"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "An bhfuil t� ag iarraidh an cumra�ocht a thrial?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Cumraigh Idirl�on"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "An bhfuil t� ag iarraidh an cumra�ocht a thrial?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Nasc Print�ir"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "�stainm Print�ir"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "An bhfuil t� ag iarraidh an cumra�ocht a thrial?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Scr�os Print�ir"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Print�ir �iti�l"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "An bhfuil t� ag iarraidh an cumra�ocht a thrial?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Scr�os Print�ir"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Cumraigh seach-freastala�"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Poirt"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Logann"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Pasfhocal"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Gan pasfhocal"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "N� mar a ch�ile na pasfhocail"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:111
-#, fuzzy, c-format
-msgid "Can't write file %s"
-msgstr "Earr�idh ag scr�obh comhad %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "teip ar 'mkraid'"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Print�ir"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Idirl�on"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "M�d Coras"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Scr�os Print�ir"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Freastala� Print�ir"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Seirbish�"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "ag rith"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "ag stoppadh"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ar T�s"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Cl�r Tosn�"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Teasc�n"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Trialaigh an cumra�ocht"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "suimi�il"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Ilmhe�nach"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Forbairt"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Bainteach le hIdirl�on"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Cl�r�adan Gr�as�n"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "freastala� �stann SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Cluich�"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Saineola�"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "sainordaitheach"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Ag feisti�l  pac�iste %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ni f�idir liom an t�bla rainn a l�amh, t� m�chaill� ann :(\n"
-"Leanfaidh m� orm ag ceal� droch rainn"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Earr�id"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Cumra�ocht Iar-feist�"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Cumra�ocht St�l Tosn�"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Comhghairdeas!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Feisti�"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Suimigh �s�ideoir"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Ag form�idi� comhad 'loopback' %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Droch comhad ch�ltaca"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Droch comhad ch�ltaca"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Droch comhad ch�ltaca"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Roghn� Gr�pa Pac�ist�"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Scrios ci�"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Dealaigh Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Ainm �s�ideora"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Teast�il an luch�g, le do thoil"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Aththrialaigh"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Aththrialaigh"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Gan pasfhocal"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Nasc LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Nasc Print�ir"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "C�n leagan amach at� ar d'eocharchl�rsa"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Roghnaigh rann le do thoil"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Droch comhad ch�ltaca"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Teast�il an luch�g, le do thoil"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Droch comhad ch�ltaca"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Cl�r�adan Gr�as�n"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Ainm �s�ideora"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Athraigh cumra�ocht an freastala�"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Athraigh cumra�ocht an freastala�"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Fan tamall"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Rothar"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Rothar"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Roghachais mod�il:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Cumra�ocht Gr�as�n�"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "C�n cin�al luch�g at� agat?"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Socraigh c�ras chomhad"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Roghnachais"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "C�n cin�al luch�g at� agat?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Cumra�ocht Gr�as�n�"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Droch comhad ch�ltaca"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "C�n cin�al luch�g at� agat?"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Droch comhad ch�ltaca"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Aisig � dhiosca flapach"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "C�n cin�al luch�g at� agat?"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Eile"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Feistigh c�ras"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Aisig � comhad"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Aisig � comhad"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Socraithe"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/C_�idi�"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Cl�r Tosn�"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Droch comhad ch�ltaca"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Aisig � comhad"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Teacs"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Roghnaigh pac�ist� ..."
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Droch comhad ch�ltaca"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Droch comhad ch�ltaca"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Droch comhad ch�ltaca"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Sabh�il i gcomhad"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Teast�il an luch�g, le do thoil"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Cumra�ocht Gr�as�n�"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Cumra�ocht Gr�as�n�"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "cumra�ocht"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "�irigh  as cumra�ocht"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Socraigh c�ras chomhad"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "Teip ag cuardach %s"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Cr�ochnithe"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formadaigh flapach"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Ag Ullmhaigh feisti�"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "teorannaigh"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Form�idigh ranna"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "�irigh  as cumra�ocht"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Roghnaigh na ranna at� le form�idi�"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Oifig"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Tobscoir"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Print�ir"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Feistigh c�ras"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Roghnaigh Comhad"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Scr�os Print�ir"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Sc�al Tosn�"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "N�l aon gaireas ghreas�n san do chor�s!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Feisti�"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "N�l aon gaireas ghreas�n san do chor�s!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Eirigh as Feisti�"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Nasc na hIdirl�on agus cumra�ocht"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Nasc na hIdirl�on agus cumra�ocht"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "suimi�il"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "N�l aon gaireas ghreas�n san do chor�s!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Cl�r�adan Gr�as�n"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "N�l aon sc�ile�n cumraithe"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Cumraigh ADSL"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Cumraigh Idirl�on"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP freastala� SMP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:340
-#, fuzzy
-msgid "Configuring..."
-msgstr "Ag cumraigh IDE"
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:378
-#, fuzzy, c-format
-msgid "Problems installing package %s"
-msgstr "Ag feisti�l  pac�iste %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Nasc na hIdirl�on agus cumra�ocht"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Nasc na hIdirl�on agus cumra�ocht"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Cumra�ocht Gr�as�n�"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-#, fuzzy
-msgid "Hostname: "
-msgstr "Ainm �s�ideora"
-
-#: ../../standalone/draknet_.c:168
-#, fuzzy
-msgid "Internet access"
-msgstr "suimi�il"
-
-#: ../../standalone/draknet_.c:181
-#, fuzzy
-msgid "Type:"
-msgstr "Cine�l: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Inneal Geata:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-#, fuzzy
-msgid "Interface:"
-msgstr "suimi�il"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Cumraigh gr�as�n�"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Cumraigh ADSL"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Tiom�na�"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Interface"
-msgstr "Cl�r�adan Gr�as�n"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Cl�r Tosn�"
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Cumraigh gr�as�n�"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Dra�odoir..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Trialaigh an cumra�ocht"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Ainm Nasc"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Not connected"
-msgstr "Cumraigh ADSL"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "cumra�ocht"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Nasc na hIdirl�on agus cumra�ocht"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Nasc na hIdirl�on agus cumra�ocht"
-
-#: ../../standalone/draknet_.c:597
-#, fuzzy
-msgid "Connection type: "
-msgstr "Athraigh cine�l ranna"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Inneal Geata:"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Bainteach le hIdirl�on"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Eorap"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Athl�daigh"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Eorap"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "srathach"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "C�n leagan amach at� ar d'eocharchl�rsa"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Athraigh CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Comhad/_Nua"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Comhad/_Oscail"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Comhad/_S�bh�il"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Comhad/S�bh�il _Mar"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Comhad/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Roghanna"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Roghnachais/Teast�il"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/C_�idi�"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/C�idi�/_Faoi..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Ainm �s�ideora"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "sc�ala�"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "faigh"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Roghnachais"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "T�g comhad"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Feilire"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Ag Pars�il an comhad %s, fan tamall"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Cumraigh Lilo/Grub"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "sc�il"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "suimi�il"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Ag form�idi�"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Cumraigh Idirl�on"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "S�bh�il mar..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "C�n cin�al luch�g at� agat?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Roghnaigh carta grafachach"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Gaireas boot�il"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "ag le�mh cumra�ocht"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "ag le�mh cumra�ocht"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Roghnaigh do theanga"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Roghnaigh rang feisti�"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr ""
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Cumraigh luch�g"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Roghnaigh mh�archl�r"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sl�nd�il"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Socraigh c�ras chomhad"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Form�idigh ranna"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Roghnaigh pac�ist� ..."
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Feistigh c�ras"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Suimigh �s�ideoir"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Cumraigh gr�as�n�"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Cumraigh seirbhis�"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Feistigh c�d tosnaithe"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Cruthaigh an diosca "
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Cumraigh X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Feistigh c�ras"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Eirigh as Feisti�"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Earr�id ag oscailt %s do scr�obh: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "ag le�mh cumra�ocht"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Fan tamall, ag ullmhaigh feisti�"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Greasan/FTP"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Print�ir Gr�as�n (lpd)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oifig"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "St�isi�n Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "St�isi�n Oibre"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "St�isi�n KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Ilmhe�nach"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "An bhfuil t� ag iarraidh an cumra�ocht a thrial?"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Ilmhe�nach"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Documentation"
-msgstr "�it"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "St�isi�n Idirl�on"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "St�isi�n Ilmhe�nach"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "cumra�ocht"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "St�isi�n Oibre"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Freastala�"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Cl�r�adan Gr�as�n"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Post/Nuacht/Groupware"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "St�isi�n Cluich�"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Ilmhe�nach"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Deasc Graphaic� Eile"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Ilmhe�nach"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "St�isi�n Oibre"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Tobscoir"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Ar bith"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Roghnagih an �s�idoer gne�s:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Scr�os Print�ir"
-
-#~ msgid "Low"
-#~ msgstr "Bun"
-
-#~ msgid "Medium"
-#~ msgstr "Gn�th"
-
-#, fuzzy
-#~ msgid "mount failed"
-#~ msgstr "teip ar 'mkraid'"
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Ilmhe�nach"
-
-#~ msgid "Boot mode"
-#~ msgstr "M�d Boot�il"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Saineola�"
-
-#, fuzzy
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Bainteach le hIdirl�on"
-
-#, fuzzy
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Cumraigh nasc ghr�as�n"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "C�n diosca ag a dteasta�onn uait � a bhogadh?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "C�n cin�al luch�g at� agat?"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Eolas"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "St�isi�n Gnome"
-
-#~ msgid "authentification"
-#~ msgstr "�dar�"
-
-#~ msgid "user"
-#~ msgstr "�s�ideoir"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "C�n cin�al luch�g at� agat?"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "�alaigh"
-
-#~ msgid "Active"
-#~ msgstr "Gn�omhach"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "N�l"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Gaireas na Print�ir �iti�l"
-
-#~ msgid "Printer Device"
-#~ msgstr "Gaireas Print�ir"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Scrios Freastala� CUPS"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "M�d Coras"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Eile"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "C�n leagan amach at� ar d'eocharchl�rsa"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Roghnaigh rann le do thoil"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Cine�l: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Droch comhad ch�ltaca"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Cumraigh X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Gaireas Print�ir"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Cealaigh"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Ceart go Leor"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "D�n"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "toot"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Nasc Print�ir"
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "Cumraigh nasc ghr�as�n"
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "An bhfuil t� ag iarraidh an cumra�ocht a thrial?"
-
-#~ msgid "Total size: "
-#~ msgstr "M�id ioml�n: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Fan tamall, "
-
-#~ msgid "Total time "
-#~ msgstr "Am ioml�n "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Bain �s�id as an cumra�ocht X11 at� ann?"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid "New"
-#~ msgstr "Nua"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Scr�os"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Roghnaigh rann le do thoil"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "D�bhr�och (%s), b� n�os cruinn\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (gn�s %s)"
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Do rogha? (gn�s %s �s�id `none' do ceann ar bith) "
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "An bhfuil t� ag iarraidh an cumra�ocht a thrial?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "An bhfuil t� ag iarraidh an cumra�ocht a thrial?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "An bhfuil t� ag iarraidh an cumra�ocht a thrial?"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Rithl�ibheal Loiceadh"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Scr�obh /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Form�idigh gach ceann"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "I ndhiadh na rann ar fad form�idi�,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "caillfear gach sonra ar na ranna"
-
-#~ msgid "Error reading file $f"
-#~ msgstr "Earr�id ag l�amh comhad $f"
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Ceichis (FIXME)"
-
-#, fuzzy
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Cumraigh nasc ghr�as�n"
-
-#~ msgid "Choose"
-#~ msgstr "Rogha"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remote queue"
-#~ msgstr "Scrios ci�"
-
-#~ msgid "Paper Size"
-#~ msgstr "M�id P�ip�ir"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Roghanna tiom�na� Uniprint"
-
-#~ msgid "Name of queue"
-#~ msgstr "Ainm ci�"
-
-#, fuzzy
-#~ msgid "Disable"
-#~ msgstr "Table"
-
-#, fuzzy
-#~ msgid "Enable"
-#~ msgstr "Table"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Cumra�ocht Gr�as�n�"
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Bainteach le hIdirl�on"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Bainteach le hIdirl�on"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Bainteach le hIdirl�on"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Bainteach le hIdirl�on"
-
-#~ msgid "yellow pages"
-#~ msgstr "leathanaigh bu�"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Cumraigh ADSL"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Roghnaigh Comhad"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Cumraigh nasc ghr�as�n"
-
-#~ msgid "Configure..."
-#~ msgstr "Cumraigh..."
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "cumra�ocht"
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "Trialaigh an cumra�ocht"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Cumraigh LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Cruthaigh flapach boot�il"
-
-#~ msgid "Choice"
-#~ msgstr "Rogha"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Eile"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Ceisteanna eile"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Cead Freastala� DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Dara Freastala� DNS"
-
-#, fuzzy
-#~ msgid "using module"
-#~ msgstr "Luch�g ar bith"
-
-#, fuzzy
-#~ msgid "Development, Database"
-#~ msgstr "Forbairt"
-
-#, fuzzy
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "C�n tesc�n ag a dteasta�onn uait � a bhogadh?"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "D�an iarracht m�ideam a aimsi�?"
-
-#, fuzzy
-#~ msgid "Configure local network"
-#~ msgstr "Cumraigh gr�as�n�"
-
-#, fuzzy
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Nasc na hIdirl�on agus cumra�ocht"
-
-#, fuzzy
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr "T� gr�as�n� l�ganta cumraithe cheana f�in. An dteasta�onn uait:"
-
-#, fuzzy
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Cumraigh C�rta� PCMCIA"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Uirlis� Idirl�on"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Forbairt C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Cumraigh crios ama"
-
-#, fuzzy
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Print�ir Gr�as�n (lpd)"
-
-#, fuzzy
-#~ msgid "Enable num lock at startup"
-#~ msgstr "X ag t�s"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Pasfhocal (ar�s)"
-
-#~ msgid "Gateway device:"
-#~ msgstr "Gaireas na hInneal Geata:"
-
-#~ msgid "default"
-#~ msgstr "gn�th"
-
-#, fuzzy
-#~ msgid "What is your system used for?"
-#~ msgstr "C�n ceann do chrois ama"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "�s�id diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Socraithe"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Bain �s�id as sc�ilcomhad"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Bain �s�id as pasfhocail MD5"
-
-#~ msgid "Search"
-#~ msgstr "Cuardaigh"
-
-#~ msgid "Package"
-#~ msgstr "Pac�iste"
-
-#~ msgid "Tree"
-#~ msgstr "Crann"
-
-#~ msgid "Category"
-#~ msgstr "Saghas"
-
-#~ msgid "Installed packages"
-#~ msgstr "Pac�ist� feisti�"
-
-#~ msgid "Available packages"
-#~ msgstr "Pac�ist� le f�il"
-
-#~ msgid "Find Package"
-#~ msgstr "Cuardaigh Pac�iste"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Directory"
-#~ msgstr "Eolaire"
-
-#~ msgid "Other countries"
-#~ msgstr "T�r Eile"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "m�ideim alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "m�ideim ECI"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "n� �s�id pppoe"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (t�bhachtach)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (an-dheas)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (deas)"
-
-#~ msgid "Czech"
-#~ msgstr "Ceich�s"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Athchumraigh an gr�as�n� �iti�l"
-
-#, fuzzy
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Bainteach le hIdirl�on"
-
-#, fuzzy
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Bainteach le hIdirl�on"
-
-#, fuzzy
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Bainteach le hIdirl�on"
-
-#, fuzzy
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Bainteach le hIdirl�on"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Uath-R�iteach"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Uath-cuardaigh r�iteach"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Feisti�/Tarrth�il"
-
-#~ msgid "Rescue"
-#~ msgstr "Tarrth�il"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Luch�g ADB Apple"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Luch�g ADB Apple (2 Cnaip�)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Luch�g Apple ADB (3+ Cnaip�)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Luch�g USB  Apple"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Luch�g USB Apple (2 Cnaip�)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Luch�g USB  Apple (3+ Cnaip�)"
-
-#~ msgid "Generic Mouse (PS/2)"
-#~ msgstr "Mouse Gn�th (PS/2)"
-
-#~ msgid "Logitech MouseMan/FirstMouse (ps/2)"
-#~ msgstr "Logitech MouseMan/FirstMouse (ps/2)"
-
-#~ msgid "ASCII MieMouse (PS/2)"
-#~ msgstr "ASCII MieMouse (PS/2)"
-
-#~ msgid "Genius NetMouse Pro (PS/2)"
-#~ msgstr "Genius NetMouse Pro (PS/2)"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "Luch�g Bus ATI"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Luch�g Bus Microsoft"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "Luch�g USB (3 cnaip� n� n�os m�)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A n� barr (srathach)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (srathach)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (srathach)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (srathach)"
-
-#~ msgid "Microsoft IntelliMouse (serial)"
-#~ msgstr "Microsoft IntelliMouse (srathach)"
-
-#~ msgid "Logitech MouseMan/FirstMouse (serial)"
-#~ msgstr "Logitech MouseMan/FirstMouse (srathach)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Luch�g de gn�th (srathach)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft n� comhori�nach (srathach)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Luch�g 3-cnaipe de gn�th (srathach)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (srathach)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "C�ard a theasta�onn uait a dh�anamh?"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "C�n cin�al luch�g at� agat?"
-
-#~ msgid "Cryptographic"
-#~ msgstr "R�nscr�obhach"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Cumraigh LAN"
-
-#~ msgid "Show less"
-#~ msgstr "Taisp�an n�os l�"
-
-#~ msgid "Show more"
-#~ msgstr "Taispe�n n�os mo"
diff --git a/perl-install/share/po/gl.po b/perl-install/share/po/gl.po
deleted file mode 100644
index a0f63f21a..000000000
--- a/perl-install/share/po/gl.po
+++ /dev/null
@@ -1,12241 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999, 2000 Mandrakesoft.
-# Copyright (C) 2000 Jes�s Bravo �lvarez.
-# Jos� Manuel Cambre <asforber@asforber.com>, 1999
-# Jes�s Bravo �lvarez <jba@pobox.com>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-06-08 18:14+0200\n"
-"Last-Translator: Jes�s Bravo �lvarez (mdk) <jba@pobox.com>\n"
-"Language-Team: Galician <trasno@ceu.fi.udc.es>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-#, fuzzy
-msgid "Use Xinerama extension"
-msgstr "Usar detecci�n autom�tica"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "lendo a configuraci�n"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Tarxeta gr�fica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Seleccione unha tarxeta gr�fica"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Escolla un servidor X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Escolla un servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "�Que configuraci�n de XFree quere usar?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A s�a tarxeta pode ter soporte de aceleraci�n 3D por hardware, pero s� con\n"
-"XFree %s. A tarxeta est� soportada por XFree %s, que pode ter un mellor\n"
-"soporte en 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"A s�a tarxeta pode ter soporte de aceleraci�n 3D por hardware con XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s con aceleraci�n 3D por hardware"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"A s�a tarxeta pode ter soporte de aceleraci�n 3D por hardware, pero s� con\n"
-"XFree %s, ADVIRTA QUE ESTE SOPORTE � EXPERIMENTAL E PODE COLGAR O SISTEMA."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s con aceleraci�n 3D por hardware EXPERIMENTAL"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A s�a tarxeta pode ter soporte de aceleraci�n 3D por hardware, pero s� con\n"
-"XFree %s, ADVIRTA QUE ESTE SOPORTE � EXPERIMENTAL E PODE COLGAR O SISTEMA.\n"
-"A s�a tarxeta est� soportada por XFree %s, que pode ter un mellor soporte en "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configuraci�n de XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Seleccione a cantidade de memoria da tarxeta gr�fica"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Escolla as opci�ns para o servidor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Escolla o monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Os dous par�metros cr�ticos son a taxa de actualizaci�n vertical, que\n"
-"indica a frecuencia coa que a pantalla completa � actualizada, e m�is\n"
-"importante a�nda � a taxa de sincronismo horizontal, que � a\n"
-"frecuencia coa que se mostran as li�as de barrido horizontal.\n"
-"\n"
-"� MOI IMPORTANTE que non especifique un tipo de monitor cun intervalo\n"
-"de frecuencias de sincronismo superior � capacidade real do seu monitor,\n"
-"xa que pode danalo.\n"
-"No caso de d�bida, escolla unha configuraci�n conservadora."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Frecuencia de actualizaci�n horizontal"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Frecuencia de actualizaci�n vertical"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "O monitor non est� configurado"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "A tarxeta gr�fica a�nda non est� configurada"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Resoluci�ns a�nda non escollidas"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "�Desexa probar a configuraci�n?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Aviso: probar esta tarxeta gr�fica pode colgar o ordenador"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Proba da configuraci�n"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"probe a cambiar alg�ns par�metros"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ocorreu un erro:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Sa�ndo en %d segundos"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "�� esta a configuraci�n correcta?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ocorreu un erro, probe a cambiar alg�ns par�metros"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resoluci�n"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Escolla a resoluci�n e a profundidade de cor"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Tarxeta gr�fica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Servidor XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "M�is"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Aceptar"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modo experto"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Ver todo"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resoluci�ns"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Disposici�n do teclado: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo de rato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo do rato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frecuencia horizontal do monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frecuencia vertical do monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Tarxeta gr�fica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Tarxeta gr�fica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memoria da tarxeta gr�fica: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profundidade de cor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resoluci�n: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador de XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Preparando a configuraci�n de X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "�Qu� desexa facer?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Mudar o monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Mudar a tarxeta gr�fica"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Mudar as opci�ns do servidor"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Mudar a resoluci�n"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostrar informaci�n"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Probar de novo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Sa�r"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"�Manter os cambios?\n"
-"A configuraci�n actual �:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Lanzar X11 � arrincar"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"P�dese configurar o seu ordenador para que entre automaticamente\n"
-"en X � arrincar. �Desexa que se execute X � reiniciar?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Entre de novo en %s para activar os cambios"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Saia da sesi�n e use Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 cores (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil cores (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil cores (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 mill�ns de cores (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 mil mill�ns de cores (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB ou m�is"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA est�ndar, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 a 87 Hz entrelazado (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrelazado, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA estendido, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA non-entrelazado, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA alta-frecuencia, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor multi-frecuencia soportando 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor multi-frecuencia soportando 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor multi-frecuencia soportando 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor soportando 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor soportando 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primeiro sector da partici�n de arranque"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primeiro sector do disco (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instalaci�n do SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "�Onde quere instalar o cargador de arrinque?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalaci�n do LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO con men� de texto"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO con men� gr�fico"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Arrincar dende DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Opci�ns principais do cargador de arrinque"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Cargador de arrinque que usar"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalaci�n do cargador de arrinque"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dispositivo de arrinque"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (non funciona en BIOS antigas)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compacto"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Modo de v�deo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Retardo antes de arrincar a imaxe por omisi�n"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Contrasinal"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Contrasinal (de novo)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Restrinxir opci�ns da li�a de comandos"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "restrinxir"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Baleirar /tmp en cada arrinque"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tama�o exacto de memoria se for necesario (atop�ronse %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Activar perf�s m�ltiples"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Indicar o tama�o da memoria en MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"A opci�n ``restrinxir opci�ns da li�a de comandos'' non ten sentido sen "
-"contrasinal"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Tente de novo"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Os contrasinais non coinciden"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Mensaxe inicial"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "�Permitir o arrinque de CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "�SO por omisi�n?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Estas son as diferentes entradas.\n"
-"Pode engadir algunhas m�is ou cambiar as que xa existen."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Engadir"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Feito"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modificar"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "�Que tipo de entrada desexa engadir?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Outros SO (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Outros SO (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Outros SO (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imaxe"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Ra�z"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Agregar"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lectura-escritura"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "T�boa"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Inseguro"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiqueta"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Por omisi�n"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr ""
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Quitar entrada"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Etiqueta baleira non permitida"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Debe ter unha partici�n de intercambio"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Esta etiqueta xa se est� a usar"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s interfaces %s atopadas"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "�Ten algunha outra?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "�Ten algunha interface %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Non"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Si"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Mire a informaci�n sobre o hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalando o controlador para a tarxeta %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(m�dulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "�Que controlador de %s desexa probar?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Nalg�ns casos, o controlador de %s necesita informaci�n extra\n"
-"para funcionar correctamente, a�nda que normalmente funcione sen ela.\n"
-"�Desexa especificar informaci�n extra para o controlador ou deixar que el\n"
-"analice o seu equipo e atope a informaci�n que necesita? �s veces,\n"
-"analizar o equipo pode provocar que se pare, pero non deber�a\n"
-"causar ning�n dano."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Autodetecci�n"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Especificar as opci�ns"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Aqu� deben ir as diferentes opci�ns para o m�dulo %s.\n"
-"As opci�ns son da forma �nome=valor nome2=valor2 ...�.\n"
-"Por exemplo pode ter �io=0x300 irq=7�"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opci�ns do m�dulo:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Fallo o cargar o m�dulo %s\n"
-"�Desexa retentalo con outros par�metros?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s xa foi engadido)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Este contrasinal � demasiado simple"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Indique o nome de usuario"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "O nome de usuario (login) s� debe conter letras, n�meros, '-' e '_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Este nome de usuario xa est� engadido"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Engadir usuario"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduza un usuario\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aceptar usuario"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nome real"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nome de usuario"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Login autom�tico"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"P�dese configurar o ordenador para que se autentique automaticamente\n"
-"como un usuario.  Se non quere usar esta caracter�stica, prema o bot�n\n"
-"cancelar."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Escolla o usuario por defecto:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Escolla o xestor de fiestras para executar:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Pode escoller outras linguas que estar�n dispo�ibles trala instalaci�n"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Todas"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Engadir usuario"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personalizado"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS iniciando"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Este paquete ten que ser actualizado\n"
-"�Est� seguro de que quere deseleccionalo?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Benvida �s crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Est�ndar"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoico"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Este nivel hai que usalo con coidado. Fai que o seu sistema sexa m�is\n"
-"sinxelo de utilizar, pero � moi sensible: non debe usarse nunha m�quina\n"
-"conectada a outras ou � Internet. Non hai contrasinais de acceso."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Os contrasinais est�n activados, pero o uso como ordenador de rede a�nda\n"
-"non se recomenda."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Esta � a seguridade recomendada para un ordenador usado para conectar\n"
-"� Internet como cliente. Agora hai m�s comprobaci�ns de seguridade."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Con este nivel de seguridade, � posible usar este sistema coma servidor.\n"
-"A seguridade � agora alta dabondo para usar o sistema coma un servidor\n"
-"que acepta conexi�ns de m�ltiples clientes."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"T�manse caracter�sticas do nivel 4, pero agora o sistema est� completamente\n"
-"pechado. As caracter�sticas de seguridade est�n � m�ximo nivel."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Escola o nivel de seguridade"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Establecendo o nivel de seguridade"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Escolla as opci�ns para o servidor"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Benvido ao %s, o selector de sistema operativo!\n"
-"\n"
-"Escolla un sistema operativo na lista de enriba, ou\n"
-"agarde %d segundos para que se arrinque o sistema por defecto.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "�Benvido ao GRUB, o selector de sistemas operativos!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use as teclas %c e %c para seleccionar a entrada marcada."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Prema enter para arrincar o SO seleccionado, 'e' para editar os"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "comandos antes de arrincar, ou 'c' para a li�a de comandos."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "A entrada marcada arrincarase automaticamente en %d segundos."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "non hai espacio dabondo en /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Escritorio"
-
-# Manter o '�' en iso-8859-1
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Men� Inicio"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "�Onde quere instalar o cargador de arrinque?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "axuda a�nda non implementada.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuraci�n do estilo de arrinque"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Ficheiro"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Ficheiro/_Sa�r"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Monitor"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Mudar o monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Modo de marcaci�n"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Modo de arrinque"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-#, fuzzy
-msgid "Configure"
-msgstr "Configurar as X"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Lanzar o sistema X-Window � iniciar"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Non, non quero login autom�tico"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Si, quero login autom�tico con este (usuario, escritorio)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Aceptar"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "non se pode abrir /etc/inittab para lectura: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Non � posible engadir m�is partici�ns"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Pode escoller outras linguas que estar�n dispo�ibles trala instalaci�n"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francia"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belga"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Alem�n"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grego"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Noruegu�s"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Mirar"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Italiano"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "serie"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Faga primeiro unha copia de seguridade dos seus datos"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "�Lea coidadosamente!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se ten pensado usar aboot, te�a coidado de deixar un espacio libre (2048\n"
-"sectores abondan) no inicio do disco"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Erro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Axudante"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Escolla a acci�n"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Ten unha partici�n FAT grande\n"
-"(xeralmente usada por Microsoft Dos/Windows).\n"
-"Acons�llase que primeiro a redimensione\n"
-"(prema nela, e logo en \"Redimensionar\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Prema nunha partici�n"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalles"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "mount fallou"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Intercambio"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Baleiro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Outros"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipos de sist. de ficheiros:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Crear"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use ``%s'' no seu lugar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Borrar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Use ``Desmontar'' primeiro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"� mudar o tipo da partici�n %s, perderanse t�dolos datos desta partici�n"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Escolla a acci�n"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Crear unha nova partici�n"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Mudar a modo experto"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Mudar a modo normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Refacer"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "�Continuar de calquera xeito?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Sa�r sen gardar"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "�Sa�r do programa sen gardar a t�boa de partici�ns?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "�Desexa probar a configuraci�n?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Asignaci�n autom�tica"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Borrar todas"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Informaci�n do correo"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "T�dalas partici�ns primarias est�n usadas"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Non � posible engadir m�is partici�ns"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Para ter m�is partici�ns, borre unha para poder crear unha partici�n "
-"estendida"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Escribir t�boa de partici�ns"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "T�boa de partici�ns de rescate"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "T�boa de partici�ns de rescate"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "T�boa de partici�ns de rescate"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Automonta-las unidades extra�bles"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Seleccione un ficheiro"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"A t�boa de partici�ns de rescate non ten\n"
-"o mesmo tama�o.  �Continuar de calquera xeito?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Advertencia"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Insira un disquete na unidade\n"
-"Perderanse t�dolos datos no disquete"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Tentando recuperar a t�boa de partici�ns de rescate"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Informaci�n do correo"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Punto de montaxe"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opci�ns"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Redimensionar"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Desprazar"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatar"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montar"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Engadir � RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Engadir � LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmontar"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Quitar do RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Quitar do LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modificar o RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Usar para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Crear unha nova partici�n"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sector inicial: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Tama�o en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipo de sist. de ficheiros: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punto de montaxe: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferencia: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatando o ficheiro loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Mudar o tipo de partici�n"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "�Qu� sistema de ficheiros desexa?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "�Onde desexa montar o ficheiro loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "�Onde desexa montar o dispositivo %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Non se pode quitar o punto de montaxe porque esta partici�n estase a\n"
-"usar de loopback.\n"
-"Quite primeiro o loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Calculando os l�mites do sistema de ficheiros FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Redimensionando"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Esta partici�n non se pode redimensionar"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Deber�a facer unha copia de seguridade dos datos desta partici�n"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"� redimensionar a partici�n %s, perderanse t�dolos datos desta partici�n"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Escoller o novo tama�o"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Tama�o en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "�A que disco desexa desprazala?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "�A que sector desexa desprazala?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Desprazando"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Desprazando partici�n..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Escolla un dos RAID para engadirlle"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novo"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Escolla un dos LVM para engadirlle"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "�Nome do LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Esta partici�n non pode usarse para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nome do ficheiro loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nome real"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "O ficheiro xa est� a ser usado por outro loopback, escolla outro"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "O ficheiro xa existe. �Usalo?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Opci�ns do m�dulo:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivel"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "tama�o do bloque de datos"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Te�a coidado: esta operaci�n � perigosa."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "�Qu� tipo de particionamento quere?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Desculpe, mais non se pode crear o directorio /boot tan lonxe no disco\n"
-"(nun cilindro > 1024). Se usa o LILO, non funcionar�, e se non o\n"
-"usa, non necesita /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"A partici�n que escolleu para usar como ra�z (/) est� fisicamente ubicada\n"
-"despois do cilindro 1024 do disco duro, e non ten partici�n /boot.\n"
-"Se pensa usar o selector de SO de arrinque LILO, lembre engadir unha\n"
-"partici�n /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Seleccionou unha partici�n RAID software como ra�z (/).\n"
-"Non hai ning�n cargador de arrinque que funcione deste xeito sen unha\n"
-"partici�n /boot.\n"
-"Lembre polo tanto engadir unha partici�n /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "�Escribirase � disco a t�boa de partici�ns da unidade %s!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Necesitar� reiniciar o equipo para que a modificaci�n sexa tomada en conta"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "� formatar a partici�n %s, perderanse t�dolos datos desta partici�n"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatando"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatando o ficheiro loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatando a partici�n %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid fallou"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Non hai espacio libre dabondo para asignar novas partici�ns"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Non hai espacio libre dabondo para asignar novas partici�ns"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Resoluci�n: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra de unidade DOS: %s (aproximaci�n)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nome: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inicio: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Tama�o: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectores"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindro %d a cilindro %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Non formatado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Ficheiro(s) loopback: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partici�n de arrinque por omisi�n\n"
-"    (para arrincar en MS-DOS, non para lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivel %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tama�o do bloque de datos %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nome do ficheiro loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tama�o: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Xeometr�a: %s cilindros, %s cabezas, %s sectores\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo de t�boa de partici�ns: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "no bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opci�ns: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Tipo de sist. de ficheiros: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Este contrasinal � demasiado simple (ten que ter polo menos %d caracteres)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Os contrasinais non coinciden"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Mudar o tipo de partici�n"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Prema nunha partici�n"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Servidor DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "O formato %s de %s fallou"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Desco��cese o xeito de formatar %s de tipo %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "erro desmontando %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simple"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Non pode usar JFS para partici�ns m�is pequenas que 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Non pode usar ReiserFS para partici�ns m�is pequenas que 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Os puntos de montaxe deben empezar por /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Xa existe unha partici�n co punto de montaxe %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Non pode usar un volume l�xico LVM para o punto de montaxe %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Este directorio deber�a permanecer dentro do sistema de ficheiros ra�z"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Necesita un sistema de ficheiros real (ext2, reiserfs) para este punto de "
-"montaxe\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Non pode usar un volume l�xico LVM para o punto de montaxe %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Non hai espacio libre dabondo para asignar novas partici�ns"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erro � abrir %s para escritura: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ocorreu un erro - non se atopou ning�n dispositivo v�lido para crear novos "
-"sistemas de ficheiros. Verifique o seu equipo para ver a raz�n deste problema"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "�Non ten ningunha partici�n!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Agora poder� escoller que servicios quere que sexan arrincados � inicio.\n"
-"Cando o seu rato pasa por riba dun elemento, unha pequena axuda aparecer�\n"
-"describindo o cometido do servicio.\n"
-"\n"
-"Sexa especialmente coidadoso neste paso se pretende utiliza-la s�a m�quina\n"
-"coma un servidor: probablemente non querer� iniciar servicios que non "
-"precisa."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Neste punto, ten que escoller onde quere instalar o sistema operativo\n"
-"Mandrake Linux no disco duro. Se est� baleiro, ou se hai outro sistema\n"
-"ocupando todo o espacio dispo�ible, ter� que particionalo. Basicamente,\n"
-"particionar un disco duro consiste en dividilo loxicamente para crear o\n"
-"espacio para instalar o seu novo sistema Mandrake Linux.\n"
-"\n"
-"\n"
-"Como os efectos do proceso de particionamento son normalmente "
-"irreversibles,\n"
-"o particionamento pode intimidar e resultar estresante para un usuario\n"
-"non experimentado.\n"
-"Este axudante simplifica o proceso. Antes de continuar, consulte o\n"
-"manual e tome o seu tempo.\n"
-"\n"
-"\n"
-"Necesita polo menos d�as partici�ns. Unha � para o propio sistema operativo\n"
-"e a outra � para a memoria virtual (tam�n chamada Intercambio ou Swap).\n"
-"\n"
-"\n"
-"Se as partici�ns xa foron definidas (nunha instalaci�n previa ou con outra\n"
-"ferramenta de particionamento), simplemente ter� que escoller cales delas\n"
-"usar no seu sistema Linux.\n"
-"\n"
-"\n"
-"Se as partici�ns a�nda non foron definidas, ter� que crealas. Para facelo,\n"
-"use o axudante dispo�ible enriba. Dependendo da configuraci�n do seu disco\n"
-"duro, hai varias soluci�ns dispo�ibles:\n"
-"\n"
-"* Usar a partici�n existente: o axudante detectou unha ou m�is partici�ns de "
-"Linux existentes no seu disco duro. Se\n"
-"  quere mantelas, escolla esta opci�n.\n"
-"\n"
-"\n"
-"* Borrar o disco completo: Se quere borrar t�dolos datos e t�dalas "
-"partici�ns existentes no disco duro e substitu�las\n"
-"  polo seu novo sistema Mandrake Linux, pode escoller esta opci�n. Te�a "
-"coidado con esta soluci�n, xa que non poder�\n"
-"  reverter o proceso despois de confirmar.\n"
-"\n"
-"\n"
-"* Usar o espacio libre na partici�n de Windows: se Microsoft Windows est� "
-"instalado no seu disco duro e ocupa todo o espacio\n"
-"  dispo�ible, ten que crear espacio libre para o Linux. Para facelo, pode "
-"borrar a partici�n de\n"
-"  Microsoft Windows e os datos (mire \"Borrar o disco completo\" ou as "
-"soluci�ns do \"Modo experto\"), ou redimensionar\n"
-"  a partici�n de Microsoft Windows. O redimensionamento p�dese realizar sen "
-"perda de datos. Esta soluci�n �\n"
-"  a recomendada se quere usar Mandrake Linux e Microsoft Windows no mesmo "
-"ordenador.\n"
-"\n"
-"\n"
-"  Antes de escoller esta soluci�n, advirta que o tama�o da s�a partici�n de "
-"Microsoft Windows\n"
-"  ser� m�is pequeno do que � agora. Isto significa que ter� menos espacio "
-"libre en Microsoft Windows para\n"
-"  almacenar os seus datos ou instalar novo software.\n"
-"\n"
-"\n"
-"* Modo experto: se quere particionar manualmente o seu disco duro, pode "
-"escoller esta opci�n. Te�a coidado\n"
-"  � escoller esta soluci�n. � potente pero moi perigosa. Pode perder os seus "
-"datos moi facilmente. Polo tanto,\n"
-"  non a escolla a menos que saiba o que est� a facer."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Por favor, sexa paciente. Esta operaci�n pode levar varios minutos."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Escolla \"Instalar\" se non hai ningunha versi�n previa de Mandrake Linux\n"
-"instalada ou se quere usar varios sistemas operativos.\n"
-"\n"
-"\n"
-"Escolla \"Actualizar\" se quere actualizar unha versi�n xa instalada de\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"Dependendo do seu co�ecemento de GNU/Linux, pode escoller un dos seguintes\n"
-"niveis para instalar ou actualizar o seu sistema operativo Mandrake Linux:\n"
-"\n"
-"* Recomendada: se nunca instalou un sistema operativo GNU/Linux, escolla\n"
-"isto. A instalaci�n ser� moi\n"
-"  sinxela e apenas se lle preguntar�n unhas poucas cuesti�ns.\n"
-"\n"
-"\n"
-"* Personalizada: se ten familiaridade dabondo con GNU/Linux, pode escoller o "
-"uso principal (estaci�n de traballo,\n"
-"  servidor, desenvolvemento) do seu sistema. Ter� que responder a m�is "
-"cuesti�ns que na clase de instalaci�n\n"
-"  \"Recomendada\", polo que necesitar� saber como funciona GNU/Linux para "
-"escoller esta opci�n.\n"
-"\n"
-"\n"
-"* Experto: se ten un bo co�ecemento de GNU/Linux, pode escoller esta clase "
-"de instalaci�n. Do mesmo xeito que en\n"
-"  \"Personalizada\", poder� escoller o uso principal (estaci�n de traballo, "
-"servidor, desenvolvemento). Te�a\n"
-"  moito coidado � escoller este nivel. Vaille permitir facer unha "
-"instalaci�n altamente personalizada.\n"
-"  Responder algunhas cuesti�ns pode ser moi dif�cil se non ten un bo "
-"co�ecemento de GNU/Linux. Polo tanto, non\n"
-"  escolla esta clase de instalaci�n a menos que saiba o que est� a facer."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Seleccione o porto correcto. Por exemplo, o porto\n"
-"COM1 en MS Windows ch�mase ttyS0 en GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (O LInux LOader) e Grub son cargadores de arrinque: poden arrincar\n"
-"Linux ou outro sistema operativo presente no seu ordenador.\n"
-"Normalmente, estes outros sitemas son detectados correctamente e "
-"instalados.\n"
-"Se non � o caso, pode engadir unha entrada a man nesta pantalla. Sexa\n"
-"coidadoso na escolla dos par�metros correctos.\n"
-"\n"
-"\n"
-"Tam�n pode non querer dar acceso a eses outros sitemas operativos a "
-"calquera,\n"
-"poidendo borrar as entradas correspondentes. Pero neste caso, precisar�\n"
-"un disquete de arrinque para poder usalos."
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Debe indicar onde desexa po�er a informaci�n\n"
-"necesaria para arrincar Linux.\n"
-"\n"
-"\n"
-"A menos que sepa exactamente o que fai, elixa sempre\n"
-"\"Primeiro sector do disco (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Insira un disquete formatado con FAT na unidade %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para usar esta selecci�n de paquetes gardada, arrinque a instalaci�n con "
-"``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erro lendo o ficheiro %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Alg�n hardware do seu ordenador necesita controladores ``propietarios''\n"
-"para funcionar. Pode atopar m�is informaci�n sobre eles en: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Ten que ter unha partici�n ra�z.\n"
-"Para iso, faga unha partici�n (ou prema nunha que xa exista).\n"
-"Ent�n escolla a acci�n ``Punto de montaxe'', e as�cieo a `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Debe ter unha partici�n de intercambio"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Non disp�n de partici�n de intercambio\n"
-"\n"
-"�Desexa continuar de calquera xeito?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Debe ter unha partici�n de intercambio"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Usar espacio libre"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Non hai espacio libre dabondo para asignar novas partici�ns"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Usar partici�n existente"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Non hai ningunha partici�n existente para usar"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Usar a partici�n de Windows para loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "�Que partici�n desexa usar para Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Escolla os tama�os"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Tama�o da partici�n ra�z en MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Tama�o da partici�n de intercambio en MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Usar o espacio libre da partici�n de Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "�Que partici�n desexa redimensionar?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Calculando os l�mites do sistema de ficheiros de Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"O redimensionador de FAT non � capaz de manexar a s�a partici�n,\n"
-"ocorreu o seguinte erro: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"A partici�n de Windows est� demasiado fragmentada, execute primeiro o "
-"``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"�AVISO!\n"
-"\n"
-"O DrakX vai agora redimensionar a partici�n de Windows. Te�a coidado:\n"
-"esta operaci�n � perigosa. Se a�nda non o fixo, deber�a executar primeiro\n"
-"o scandisk no Windows (e opcionalmente o defrag), e reiniciar a "
-"instalaci�n.\n"
-"Tam�n � aconsellable facer unha copia de seguridade dos seus datos.\n"
-"Cando estea seguro, prema Aceptar."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "�Que tama�o desexa manter para o Windows en"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partici�n %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "O redimensionamento da FAT fallou: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Non hai partici�ns FAT para redimensionar ou para usar como loopback (ou non "
-"hai espacio libre dabondo)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Borrar o disco completo"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Borrar Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Ten m�is dunha unidade de disco duro, �en cal delas desexa instalar linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Perderanse TODAS as partici�ns existentes e os seus datos na unidade %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Particionamento de disco personalizado"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Usar fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Pode agora particionar %s.\n"
-"Cando remate, non esqueza gravar usando `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Non ten espacio libre dabondo na partici�n de Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Non se pode atopar espacio para a instalaci�n"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "O axudante de particionamento do DrakX atopou as seguintes soluci�ns:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "O particionamento fallou: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Activando a rede"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Desactivando a rede"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ocorreu un erro, e o programa non sabe como manexalo de\n"
-"maneira limpa. Contin�e � seu propio risco."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punto de montaxe %s duplicado"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Alg�ns paquetes importantes non se instalaron correctamente.\n"
-"A unidade de cdrom ou o cdrom est�n defectuosos.\n"
-"Comprobe o cdrom nun ordenador xa instalado usando \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Benvido a %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ningunha disqueteira dispo�ible"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrando na etapa '%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"O seu sistema ten poucos recursos. Pode que te�a alg�n problema\n"
-"instalando Mandrake Linux. Se iso acontece, pode tentar unha instalaci�n\n"
-"en modo texto.  Para iso, prema 'F1' cando arrinque o CDROM, e escriba\n"
-"'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Clase de instalaci�n"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Escolla unha das seguintes clases de instalaci�n:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "O tama�o total dos grupos que seleccionou � aproximadamente %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se quere instalar menos deste tama�o,\n"
-"seleccione a porcentaxe de paquetes que desexe.\n"
-"\n"
-"Unha porcentaxe baixa instalar� s� os paquetes m�is importantes;\n"
-"unha porcentaxe dun 100%% instalar� t�dolos paquetes seleccionados."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Ten espacio no seu disco para unicamente o %d%% destes paquetes.\n"
-"\n"
-"Se desexa instalar menos ca isto,\n"
-"seleccione a porcentaxe de paquetes que quere instalar.\n"
-"Unha porcentaxe baixa instalar� s� os paquetes m�is importantes;\n"
-"unha porcentaxe de %d%% instalar� t�dolos paquetes posibles."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Vostede poder� escollelos m�is especificamente na seguinte etapa."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Porcentaxe de paquetes a instalar"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Selecci�n dos grupos de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Selecci�n individual de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tama�o total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Paquete err�neo"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nome: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versi�n: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tama�o: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importancia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Non pode seleccionar este paquete xa que non hai espacio dabondo para "
-"instalalo"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Vanse instalar os seguintes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Vanse eliminar os seguintes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Non pode seleccionar/deseleccionar este paquete"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Este � un paquete obrigatorio, non se pode deseleccionar"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Non pode deseleccionar este paquete. Xa est� instalado"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Este paquete ten que ser actualizado\n"
-"�Est� seguro de que quere deseleccionalo?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Non pode deseleccionar este paquete. Ten que ser actualizado"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalar"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Gardar nun disquete"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Gardar a selecci�n de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Desinstalar"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Escolla os paquetes que desexa instalar"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalando"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Estimando"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tempo restante "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Por favor, agarde, preparando a instalaci�n"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paquetes"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalando o paquete %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aceptar"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Rexeitar"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"�Mude o Cd-Rom!\n"
-"\n"
-"Por favor, insira o Cd-Rom etiquetado \"%s\" na unidade e prema Aceptar. Se "
-"non o ten, prema Cancelar para omitir a instalaci�n deste Cd-Rom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "�Seguir adiante?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Houbo un erro � ordenar os paquetes:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Houbo un erro � instalar os paquetes:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ocorreu un erro"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "�Desexa reiniciar a rede?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Acordo da licencia"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclado"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Escolla a disposici�n do seu teclado."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Esta � a lista completa de teclados dispo�ibles"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "�Qu� clase de instalaci�n desexa?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalar/Actualizar"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "�� isto unha instalaci�n ou unha actualizaci�n?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recomendada"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Experto"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Actualizaci�n"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Gardar a selecci�n de paquetes"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Escolla o seu tipo de rato."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Porto do rato"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Escolla o porto serie onde est� conectado o seu rato."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Configurando tarxetas PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Configurando o IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ningunha partici�n dispo�ible"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Examinando as partici�ns para atopar os puntos de montaxe"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Seleccione os puntos de montaxe"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Non se pode ler a t�boa de partici�ns, est� demasiado deteriorada :(\n"
-"P�dese probar baleirando as partici�ns err�neas (�Perderanse TODOS os "
-"datos!).\n"
-"A outra soluci�n � impedir que o DrakX modifique a t�boa de partici�ns.\n"
-"(o erro � %s)\n"
-"\n"
-"�Concorda coa perda de t�dalas partici�ns?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"O DiskDrake non puido ler correctamente a t�boa de partici�ns.\n"
-"�Contin�e � seu propio risco!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Elixa as partici�ns que desexa formatar"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partici�n ra�z"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "�Cal � a partici�n ra�z (/) do seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Necesita reiniciar o equipo para que a modificaci�n da t�boa\n"
-"de partici�ns se tome en conta"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Elixa as partici�ns que desexa formatar"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "�Comprobar os bloques err�neos?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatando as partici�ns"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creando e formatando o ficheiro %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Non hai espacio de intercambio dabondo para finalizar a instalaci�n,\n"
-"por favor, engada alg�n"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Buscando os paquetes dispo�ibles"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Atopando os paquetes para actualizar"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"O seu sistema non ten espacio libre dabondo para a instalaci�n ou "
-"actualizaci�n (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completo (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "M�nimo (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomendado (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaurar a partir dun disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaurar a partir dun disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Selecci�n dos grupos de paquetes"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Insira un disquete na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Gardar nun disquete"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Elixa o paquete a instalar"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Agarde"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se ten t�dolos CDs na lista inferior, prema Aceptar.\n"
-"Se non ten ning�n deses CDs, prema Cancelar.\n"
-"Se s� faltan alg�ns dos CDs, desm�rqueos, e prema Aceptar."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom etiquetado \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Preparando a instalaci�n"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalando o paquete %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configuraci�n trala instalaci�n"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Insira un disquete na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Insira un disquete baleiro na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Vostede ter� agora a posibilidade baixar programas de criptograf�a.\n"
-"\n"
-"AVISO:\n"
-"\n"
-"Por mor de requirimentos xerais aplicables a estes programas, e impostos\n"
-"por varias xurisdicci�ns, o cliente e/ou o usuario final destes programas "
-"ten\n"
-"que se asegurar de que as leis da s�a xurisdicci�n lle permiten baixar,\n"
-"almacenar e/ou usar estes programas.\n"
-"\n"
-"Ademais, o cliente e/ou o usuario final ten que ter especial coidado en non\n"
-"infrinxi-las leis da s�a xurisdicci�n. Se o cliente e/ou o usuario final "
-"non\n"
-"respeta estas leis aplicables, incorrer� en sanci�ns graves.\n"
-"\n"
-"De ning�n xeito Mandrakesoft nin os seus fabricantes e/ou provedores ser�n\n"
-"responsables de danos especiais, indirectos ou incidentais, sexan o que "
-"foren\n"
-"(incluindo, pero non limitando a, perda de beneficios, interrupci�n dos\n"
-"negocios, perda de datos comerciais e outras perdas pecuniarias, e nas\n"
-"eventuais responsabilidades e indemnizaci�ns a seren pagadas por decisi�n\n"
-"dun tribunal) procedentes do uso, posesi�n, ou simplemente o feito de "
-"baixar\n"
-"este software, � cal o cliente e/ou o usuario final tivese eventualmente\n"
-"acceso despois de asinar este acordo.\n"
-"\n"
-"Para calquera pregunta acerca de este acordo, por favor p��ase en contacto "
-"con\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Contactando co espello para obter a lista dos paquetes dispo�ibles"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escoller un espello do que coller os paquetes"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Contactando co espello para obter a lista dos paquetes dispo�ibles"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "�Cal � a s�a zona horaria?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "�O reloxo interno do seu ordenador usa a hora GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Sen impresora"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "�Ten algunha outra?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Resume"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Rato"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Zona horaria"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Impresora"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Tarxeta RDSI"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Tarxeta de son"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Tarxeta de TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Usar NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Impresora local"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Contrasinal de root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Sen contrasinal"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Este contrasinal � demasiado simple (ten que ter polo menos %d caracteres)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autenticaci�n"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autenticaci�n"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Servidor"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autenticaci�n NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Dominio NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-#, fuzzy
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Un disco de arrinque personalizado d�lle a posibilidade de arrincar o seu\n"
-"equipo baixo Linux sen depender do cargador de arrinque normal. Isto pode "
-"ser\n"
-"�til se non desexa instalar LILO (ou grub) no seu sistema, ou se outro "
-"sistema\n"
-"operativo o borra ou se LILO non funciona coa configuraci�n do seu equipo.\n"
-"Un disco de arrinque personalizado tam�n pode ser usado coa imaxe de "
-"rescate\n"
-"de Mandrake, facendo as� moito m�is f�cil a recuperaci�n no caso de fallo\n"
-"grave do sistema. �Desexa crear un disco de arrinque para o seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primeira unidade de disquete"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Segunda unidade de disquete"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Omitir"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Un disco de arrinque personalizado d�lle a posibilidade de arrincar o seu\n"
-"equipo baixo Linux sen depender do cargador de arrinque normal. Isto pode "
-"ser\n"
-"�til se non desexa instalar LILO (ou grub) no seu sistema, ou se outro "
-"sistema\n"
-"operativo o borra ou se LILO non funciona coa configuraci�n do seu equipo.\n"
-"Un disco de arrinque personalizado tam�n pode ser usado coa imaxe de "
-"rescate\n"
-"de Mandrake, facendo as� moito m�is f�cil a recuperaci�n no caso de fallo\n"
-"grave do sistema. �Desexa crear un disco de arrinque para o seu sistema?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Desculpe, pero non hai ningunha disqueteira dispo�ible"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Escolla a disqueteira que quere usar para crear o disco de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Insira un disquete na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Creando o disco de arrinque"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Preparando o cargador de arrinque"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "�Desexa usar aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Erro instalando aboot, \n"
-"�probar a forzar a instalaci�n mesmo se iso destr�e a primeira partici�n?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Cargador de arrinque"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "A instalaci�n do xestor de arrinque fallou. Ocorreu o seguinte erro:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Insira un disquete baleiro na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Creando un disquete de auto-instalaci�n"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Algunhas das etapas non foron completadas.\n"
-"\n"
-"�Desexa realmente sa�r agora?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Noraboa, a instalaci�n rematou.\n"
-"Quite o disco de arrinque da unidade e prema [enter] para reiniciar.\n"
-"\n"
-"\n"
-"Para informaci�n sobre parches dispo�ibles para esta versi�n\n"
-"de Mandrake Linux, consulte o ficheiro de erratas dispo�ibles en\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Para informaci�n sobre a configuraci�n do seu sistema, despois\n"
-"da instalaci�n, hai un cap�tulo na Gu�a do Usuario Oficial\n"
-"de Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Xerar disquete de auto-instalaci�n"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"A auto-instalaci�n pode ser moi automatizada se as�\n"
-"se desexa, nese caso adquirir� o control do disco duro\n"
-"(isto vale para a instalaci�n noutro equipo).\n"
-"\n"
-"Pode preferir realizar novamente a instalaci�n.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizada"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Reproducir"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Gardar a selecci�n de paquetes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalaci�n de Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> entre elementos  |  <Space> escoller  |  <F12> seguinte "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "falla o kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Escolla a acci�n"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avanzado"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Agarde, por favor"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expandir �rbore"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Pechar �rbore"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Mudar entre lista completa e ordenada por grupos"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Elecci�n incorrecta, tente de novo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "�A s�a escolla? (por omisi�n %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "�A s�a escolla? (por omisi�n %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opci�ns: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "�Desexa usar aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "�A s�a escolla? (por omisi�n %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Checo (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Alem�n"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Teclado dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Espa�ol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finland�s"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Franc�s"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Noruegu�s"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polaco"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruso"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sueco"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Brit�nico"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Estadounidense"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenio (antigo)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenio (m�quina de escribir)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenio (fon�tico)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaian� (lat�n)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armenio (fon�tico)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "B�lgaro"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasileiro (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorruso"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Su�zo (alem�n)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Su�zo (franc�s)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Checo (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Alem�n (sen teclas acentuadas)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dinamarqu�s"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (EUA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruegu�s)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (EUA)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonio"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Xeorxiano (\"ruso\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Xeorxiano (\"latino\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grego"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "H�ngaro"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israel�"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israel� (Fon�tico)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Island�s"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiano"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Xapon�s de 106 teclas"
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Brit�nico"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinoamericano"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituano AZERTY (antigo)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituano AZERTY (novo)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituano \"ringleira de n�meros\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituano \"fon�tico\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Localizaci�n"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonio"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holand�s"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polaco (disposici�n qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polaco (disposici�n qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugu�s"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadiano (Qu�bec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Esloveno"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovaco (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovaco (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaian� (cir�lico)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "T�boa"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Teclado Thai"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Teclado Thai"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (tradicional modelo \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (moderno modelo \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucra�no"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Estadounidense (internacional)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"ringleira de n�meros\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslavo (lat�n/cir�lico)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Puntos de montaxe circulares %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Quitar primeiro os volumes l�xicos\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Rato Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Rato de roda PS2 xen�rico"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 bot�n"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Rato de 2 bot�ns xen�rico"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Xen�rico"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Roda"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serie"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Rato de 3 bot�ns xen�rico"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Rato Logitech (serie, antigo tipo C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 bot�ns"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 bot�ns"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ning�n"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Ning�n rato"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Probe o seu rato"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Para activar o rato,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "�MOVA A RODA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finalizar"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Seguinte ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "�� isto correcto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Conectar � Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"O xeito m�is habitual de conectar con adsl � con pppoe.\n"
-"Algunhas conexi�ns usan pptp, e algunhas usan dhcp.\n"
-"Se non o sabe con certeza, escolla 'usar pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usar dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usar pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usar pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"�Que cliente dhcp desexa usar?\n"
-"Por omisi�n � o dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Non se detectou ning�n adaptador de rede ethernet no seu sistema.\n"
-"Non se pode configurar este tipo de conexi�n."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Escolla a interface de rede"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Escolla o adaptador de rede que desexa usar para conectar � Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "non se atopou ningunha tarxeta de rede"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Configurando a rede"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Introduza o nome da s�a m�quina se o co�ece.\n"
-"Alg�ns servidores DHCP precisan o nome da m�quina para funcionar.\n"
-"Este nome debe ser completamente cualificado,\n"
-"como ``mi�amaquina.meulab.mi�acomp.es''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nome de m�quina"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Axudante da configuraci�n de rede"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "M�dem RDSI externo"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Tarxeta RDSI interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "�Que tipo de conexi�n RDSI ten?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "�Detectouse unha configuraci�n de firewall!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "�Detectouse unha configuraci�n de firewall!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configuraci�n da RDSI"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Seleccione o seu provedor.\n"
-" Se non est� na lista, escolla 'Unlisted'"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protocolo de arrinque"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Resto do mundo"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Resto do mundo \n"
-" sen canle-D (li�as dedicadas)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "�Qu� protocolo desexa usar?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "�Qu� tipo de tarxeta ten?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Non sei"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se ten unha tarxeta ISA, os valores na seguinte pantalla deber�an ser os "
-"correctos.\n"
-"\n"
-"Se ten unha tarxeta PCMCIA, ten que co�ecer a irq e a e/s da tarxeta.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abortar"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continuar"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "�Cal � a sua tarxeta RDSI?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Detectouse unha Tarxeta RDSI PCI, pero se desco�ece o tipo. Seleccione unha "
-"tarxeta PCI na seguinte pantalla."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Non se atopou ningunha tarxeta RDSI PCI. Seleccione unha na pr�xima pantalla."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Escolla o porto serie onde est� conectado o seu m�dem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opci�ns de chamada"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nome da conexi�n"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "N�mero de tel�fono"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID do login"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Baseado nun script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Baseado nun terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nome de dominio"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primeiro Servidor DNS (opcional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Segundo Servidor DNS (opcional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Pode desconectar ou reconfigurar a s�a conexi�n."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Pode reconfigurar a s�a conexi�n."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Est� neste intre conectado � internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Pode conectar � Internet ou reconfigurar a s�a conexi�n."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Non est� neste intre conectado � Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Conectar"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "conexi�n por RDSI"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Configurar a rede"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Conexi�n e configuraci�n de Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Pode desconectar ou reconfigurar a s�a conexi�n."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Pode desconectar ou reconfigurar a s�a conexi�n."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configuraci�n da rede"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Como est� a facer unha instalaci�n de rede, esta xa est� configurada.\n"
-"Prema Aceptar para manter a configuraci�n, ou Cancelar para reconfigurar a "
-"conexi�n de rede e Internet.\n"
-
-#: ../../network/netconnect.pm_.c:165
-#, fuzzy
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Conexi�n � Internet\n"
-"\n"
-"Vaise configurar a s�a conexi�n � internet/rede.\n"
-"Se non quere usar a detecci�n autom�tica, desmarque a caixa.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Escolla o perfil para configurar"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Usar detecci�n autom�tica"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detectando os dispositivos..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Conexi�n normal por m�dem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detectado no porto %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "conexi�n por RDSI"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detectouse %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Conexi�n LAN"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectouse na interface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Conexi�n por cable"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Conexi�n por cable"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Conexi�n LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "tarxeta(s) ethernet detectada(s)"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Elixa a ferramenta que queira usar"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Compartici�n da conexi�n � Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "�Desexa que a conexi�n se inicie � arrincar?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configuraci�n da rede"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "�Desexa reiniciar a rede?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Noraboa. A configuraci�n da rede e de internet est� rematada.\n"
-"\n"
-"Agora vai ser aplicada � seu sistema.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Tras facer iso, acons�llase reiniciar o sistema X para\n"
-"evitar os problemas de mudar o nome de m�quina."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"AVISO: Este dispositivo foi configurado previamente para conectar � "
-"Internet.\n"
-"Simplemente acepte para manter o dispositivo configurado.\n"
-"Se modifica os campos de embaixo, subsituir� esta configuraci�n."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Introduza o enderezo IP desta m�quina, por favor.\n"
-"Cada valor ten que ser introducido coma un enderezo IP en\n"
-"notaci�n decimal con puntos (por exemplo: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configurar o dispositivo de rede %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (controlador %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Enderezo IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "M�scara de rede"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP autom�tico"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Os enderezos IP deben estar no formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Introduza o nome da s�a m�quina.\n"
-"Ese nome debe ser un nome completamente cualificado,\n"
-"como ``mi�amaquina.meulab.mi�acomp.es''.\n"
-"Pode tam�n introducir o enderezo IP da pasarela se usa unha"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Servidor DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dispositivo de pasarela"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configuraci�n dos proxys"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "O proxy deber�a ser http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "O proxy deber�a ser ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configuraci�n de Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "�Quere probar agora a conexi�n � Internet?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Probando a conexi�n..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "O sistema est� conectado � Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Semella que o sistema non est� conectado � internet.\n"
-"Probe reconfigurando a conexi�n."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configuraci�n da conexi�n"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Encha ou marque os campos de embaixo"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ da tarxeta"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memoria da tarxeta (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "E/S da tarxeta"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "E/S_0 da tarxeta"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "E/S_1 da tarxeta"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "O seu n�mero de tel�fono persoal"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nome do provedor (p.ex provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "N�mero de tel�fono do provedor"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Dns 1 do provedor (opcional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Dns 2 do provedor (opcional)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Escoller teclado"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Modo de marcaci�n"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Tipo de conexi�n: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tipo de conexi�n: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Login da conta (nome de usuario)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Contrasinal da conta"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "mount fallou: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "As partici�ns estendidas non est�n soportadas nesta plataforma"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Ten un burato na t�boa de partici�ns, pero non se pode usar.\n"
-"A �nica soluci�n � desprazar as partici�ns primarias para que\n"
-"o burato est� despois das partici�ns estendidas"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Fallou a restauraci�n a partir do ficheiro %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erro escribindo � ficheiro %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Est� a acontecer algo grave coa s�a unidade.\n"
-"A proba para verificar a integridade dos datos fallou.\n"
-"Isto significa que calquera escritura no disco producir� lixo aleatorio"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "debe telo"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "moi bo"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bo"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "indiferente"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Impresora local"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Impresora remota"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Servidor lpd remoto"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Impresora de rede (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Impresora SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servidor de impresi�n"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "URI do dispositivo de impresi�n"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Impresora local"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Impresora remota"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Erro escribindo � ficheiro %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(m�dulo %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP do servidor CUPS"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Por omisi�n)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Selecci�n da conexi�n da impresora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "�Como est� conectada a impresora?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Cun servidor CUPS remoto, non ter� que configurar aqu�\n"
-"ningunha impresora, xa que ser�n detectadas automaticamente.\n"
-"No caso de d�bida, seleccione \"Servidor CUPS remoto\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Configuraci�n da LAN"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Os enderezos IP deben estar no formato 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "O n�mero de porto debe ser num�rico"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Porto"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configuraci�n do estilo de arrinque"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Detectando os dispositivos..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Probar portos"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Sen impresora"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Impresora local"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Usar detecci�n autom�tica"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "detectouse %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "URI do dispositivo de impresi�n"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Impresora local"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Escolla o porto serie onde est� conectado o seu m�dem."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "URI do dispositivo de impresi�n"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Configuraci�n"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instalando o paquete %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instalando o paquete %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opci�ns da impresora remota lpd"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Para utilizar unha fila de impresi�n remota lpd, � necesario\n"
-"que indique o nome do servidor de impresi�n e o nome da fila\n"
-"nese servidor."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nome do servidor"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nome do servidor"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nome do servidor"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opci�ns de impresora SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Para imprimir nunha impresora SMB, � necesario escribir o\n"
-"nome do servidor SMB (que non sempre � o mesmo que o nome de\n"
-"m�quina TCP/IP) e posiblemente o enderezo IP do servidor de\n"
-"impresoras, ademais � necesario o nome do recurso compartido\n"
-"da impresora que quere usar, as� como calquera nome de usuario,\n"
-"grupo de traballo ou contrasinal que for necesario."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Servidor de SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP do servidor SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nome de recurso compartido"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grupo de traballo"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opci�ns de impresora NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Para imprimir nunha impresora NetWare, � necesario escribir o nome\n"
-"do servidor de impresi�n NetWare (que non sempre � o mesmo que\n"
-"o nome de m�quina TCP/IP), ademais do nome da fila de impresi�n\n"
-"que desexa usar, as� como calquera nome de usuario ou contrasinal\n"
-"que for necesario."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Servidor de impresi�n"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nome da fila de impresi�n"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Opci�ns da impresora de socket"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Para imprimir nunha impresora de socket, ten que fornecer\n"
-"o nome do servidor da impresora, e opcionalmente o n�mero do porto."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Servidor de impresi�n"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Servidor de impresi�n"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI do dispositivo de impresi�n"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nome da impresora"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Descrici�n"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Localizaci�n"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "�� isto correcto?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Conexi�n da impresora"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "�Qu� tipo de impresora ten?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configuraci�n de Internet"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configuraci�n de Internet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "�Desexa probar a impresi�n?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Probar portos"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Si, imprimir ambas p�xinas de proba"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Impresora"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Ferramentas est�ndar"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Imprimindo p�xina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Imprimindo p�xina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Imprimindo p�xina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Imprimindo p�xina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"A(s) p�xina(s) de proba envi�ronse � servidor de impresi�n.\n"
-"Pode que lle leve un pouco ata que a impresora comece.\n"
-"Estado da impresi�n:\n"
-"%s\n"
-"\n"
-"�Funciona correctamente?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"A(s) p�xina(s) de proba envi�ronse � servidor de impresi�n.\n"
-"Pode que lle leve un pouco ata que a impresora comece.\n"
-"�Funciona correctamente?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Sen impresora"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Rato"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Desactivando a rede"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Desactivando a rede"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Opci�ns da impresora"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configuraci�n de Internet"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Sen impresora"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Configurar a impresora"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Probando a conexi�n..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configurar a rede"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "O monitor non est� configurado"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Configurando a rede"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "�Que sistema de impresi�n desexa usar?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Alto"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoico"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "�Que sistema de impresi�n desexa usar?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Selecci�n da conexi�n da impresora"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "�Que sistema de impresi�n desexa usar?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configurar impresora"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instalando o paquete %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opci�ns da impresora"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Configurar impresora"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "�Desexa configurar unha impresora?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Estas son as filas de impresi�n.\n"
-"Pode engadir unha nova ou cambiar as que xa existen."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Estas son as filas de impresi�n.\n"
-"Pode engadir unha nova ou cambiar as que xa existen."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Configurar a rede"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "�Desexa probar a configuraci�n?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configuraci�n de Internet"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "�Desexa probar a configuraci�n?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Compartici�n da conexi�n � Internet"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Conexi�n da impresora"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Imprimindo p�xina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "�Desexa probar a configuraci�n?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Impresora local"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "�Desexa reiniciar a rede?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Configuraci�n dos proxys"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Porto"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "O proxy deber�a ser http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "O n�mero de porto debe ser num�rico"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "O proxy deber�a ser ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Login autom�tico"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Contrasinal"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Sen contrasinal"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Os contrasinais non coinciden"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Non se pode engadir unha partici�n � RAID _formatado_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Non se pode escribir o ficheiro %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid fallou"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid fallou (�pode que non estean as raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Non hai partici�ns dabondo para o nivel RAID %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un xestor de comandos peri�dicos."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd �sase para monitorizar o estado da bater�a e rexistralo a trav�s do\n"
-"syslog. Tam�n pode usarse para apagar a m�quina cando a bater�a est� baixa."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Executa os comandos programados polo comando at � hora indicada cando\n"
-"se executou at, e lanza comandos de lotes cando a carga media � baixa\n"
-"dabondo."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"O cron � un programa est�ndar de UNIX que executa programas especificados\n"
-"polo usuario en datas peri�dicas programadas. O vixie cron engade algunhas\n"
-"caracter�sticas � cron b�sico de UNIX, incluindo mellor seguridade e\n"
-"opci�ns de configuraci�n m�is potentes."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM engade soporte para o rato �s aplicaci�ns de texto de Linux, como\n"
-"o Midnight Commander. Tam�n permite operaci�ns de cortar e pegar co rato\n"
-"na consola, as� como incl�e soporte para men�s."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache � un servidor de World Wide Web.  �sase para servir ficheiros HTML\n"
-"e CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"O daemon superservidor de internet (usualmente chamado inetd) lanza varios\n"
-"outros servicios de internet cando se precisan. � o responsable de iniciar\n"
-"moitos servicios, inclu�ndo telnet, ftp, rsh, e rlogin. Desactivando inetd\n"
-"desact�vanse t�dolos servicios de internet dos que � responsable."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Este paquete carga o mapa de teclado seleccionado en /etc/sysconfig/"
-"keyboard.\n"
-"Este pode escollerse usando a utilidade kbdconfig. Deber�a deixar isto\n"
-"activado para a maior�a dos sistemas."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd � o daemon de impresi�n requirido para que o lpr funcione\n"
-"correctamente. � basicamente un servidor que distrib�e os traballos de\n"
-"impresi�n �(s) impresora(s)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) � un servidor de nomes de dominio (DNS), que se emprega\n"
-"para converter os nomes de m�quinas a enderezos IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta e desmonta t�dolos puntos de montaxe de sistemas de\n"
-"ficheiros de Rede (NFS), SMB (Lan Manager/Windows) e NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/desactiva t�dalas interfaces de rede configuradas para\n"
-"seren activadas no arrinque."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS � un protocolo popular para compartir ficheiros a trav�s de redes TCP/"
-"IP.\n"
-"Este servicio fornece funcionalidade de servidor NFS, que se configura co\n"
-"ficheiro /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS � un protocolo popular para compartir ficheiros a trav�s de\n"
-"redes TCP/IP. Este servicio fornece funcionalidade de bloqueo de ficheiros."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"O soporte PCMCIA � normalmente para cousas como ethernet e m�dems en\n"
-"port�tiles.  Non ser� arrincado ata que non estea configurado de xeito\n"
-"que non haxa problemas � telo instalado en m�quinas que non o precisan."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"O portmapper xestiona as conexi�ns RPC, que son usadas por protocolos\n"
-"como NFS e NIS. O servidor portmap ten que estar a se executar en m�quinas\n"
-"que act�an de servidores de protocolos que usan o mecanismo RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix � un axente de transporte de correo (MTA), que � o programa\n"
-"que move o correo dunha m�quina a outra."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Garda e restaura o estado da entrop�a do sistema para unha xeraci�n\n"
-"de n�meros aleatorios de calidade."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"O daemon routed permite actualizaci�ns autom�ticas da t�boa de\n"
-"encami�amento IP mediante o protocolo RIP. Mentres RIP se usa amplamente\n"
-"en redes pequenas, outros protocolos m�is complexos de encami�amento\n"
-"prec�sanse para redes m�is complexas."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"O protocolo rstat permite �s usuarios dunha rede obter\n"
-"m�tricas de rendemento de calquera m�quina desa rede."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"O protocolo rusers permite �s usuarios dunha rede identificar quen\n"
-"est� conectado noutras m�quinas activas."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"O protocolo rwho permite que os usuarios remotos obte�an unha lista de\n"
-"t�dolos usuarios conectados a unha m�quina que est� a executar o daemon\n"
-"rwho (similar � finger)."
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Lanzar o sistema X-Window � iniciar"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"O syslog � o m�todo que usan moitos daemons para rexistrar mensaxes\n"
-"nos diversos ficheiros de rexistro do sistema.  � unha boa idea executar\n"
-"sempre o syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Executa e para o Servidor de Fontes X � arrincar e apagar."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Escolla os servicios que deben ser lanzados no arrinque do sistema"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Impresora"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Mouse Systems"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opci�ns da impresora remota lpd"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Bases de datos"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "dispositivo"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "a se executar"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "parado"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servicios e daemons"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Non hai informaci�n adicional\n"
-"sobre este servicio, desculpe."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "� arrincar"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Estado:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sector"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Resto do mundo"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Acceso � Internet"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedia - Gr�ficos"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Desenvolvemento"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Centro de control"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Interface de rede"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Servidor de SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Xogos"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Experto"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "obrigatorio"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalando o paquete %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Non se pode ler a t�boa de partici�ns, est� demasiado deteriorada :-(\n"
-"Probarase a ir po�endo en branco as partici�ns err�neas"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Erro"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Configuraci�n trala instalaci�n"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configuraci�n do estilo de arrinque"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "�Noraboa!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalar"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Engadir usuario"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatando o ficheiro loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Selecci�n dos grupos de paquetes"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Eliminar fila"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows(FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Usuarios"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Probe o seu rato"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Tente de novo"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Tente de novo"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Sen contrasinal"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Conexi�n LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Selecci�n da conexi�n da impresora"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Escolla a disposici�n do seu teclado."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Prema nunha partici�n"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Probe o seu rato"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Nome de usuario"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Usar optimizaci�ns de disco duro"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Usar optimizaci�ns de disco duro"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Agarde"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Roda"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Roda"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Opci�ns do m�dulo:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Configuraci�n da rede"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Sistemas de ficheiros"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-#, fuzzy
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr "Ficheiros:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-#, fuzzy
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr "Ficheiros:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opci�ns"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Escolla o porto serie onde est� conectado o seu m�dem."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Configuraci�n da rede"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Escolla o seu tipo de rato."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Restaurar a partir dun disquete"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Escolla o seu tipo de rato."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Outros"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instalar sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Restaurar a partir dun ficheiro"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Restaurar a partir dun ficheiro"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Personalizado"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Axuda"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Anterior"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Estado:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Restaurar"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Texto"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Seleccionar paquetes"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Gardar nun ficheiro"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Probe o seu rato"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Configuraci�n da rede"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Configuraci�n da rede"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Configuraci�n da LAN"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Configuraci�n da LAN"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Sistemas de ficheiros"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Fallou a instalaci�n do %s. Ocorreu o erro seguinte:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s non atopado"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "feito"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formatar disquete"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Preparando a instalaci�n"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "restrinxir"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "restrinxir"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatar partici�ns"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Desinstalando os RPMs"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Configuraci�n da LAN"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Punto de montaxe"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Elixa as partici�ns que desexa formatar"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Office"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Abortar"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Impresora"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instalar sistema"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Seleccione un ficheiro"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Impresora remota"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Mensaxe inicial"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "�Non hai ning�n adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalar"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "�Non hai ning�n adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Sa�r da instalaci�n"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Compartici�n da conexi�n � Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "A compartici�n da conexi�n � Internet est� activada"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuraci�n da compartici�n da conexi�n � Internet xa foi feita.\n"
-"Actualmente est� activada.\n"
-"\n"
-"�Que desexa facer?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "desactivar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "reconfigurar"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Desactivando os servidores..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "A compartici�n da conexi�n � Internet est� agora desactivada."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "A compartici�n da conexi�n � Internet est� desactivada"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuraci�n da compartici�n da conexi�n � Internet xa foi feita.\n"
-"Actualmente est� desactivada.\n"
-"\n"
-"�Que desexa facer?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "activar"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Activando os servidores..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "A compartici�n da conexi�n � Internet est� agora activada."
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Est� a piques de configurar o seu ordenador para que comparta a conexi�n � "
-"Internet.\n"
-"\n"
-"Nota: necesita un adaptador de rede dedicado para configurar unha rede de "
-"�rea local (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (usando o m�dulo %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "�Non hai ning�n adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Non se detectou ning�n adaptador de rede ethernet no seu sistema. Execute a "
-"ferramenta de configuraci�n de hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"S� hai un adaptador de rede configurado no seu sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Vaise configurar a rede de �rea local usando ese adaptador."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Escolla o adaptador de rede que vai estar conectado � rede de �rea local."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "O monitor non est� configurado"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Configuraci�n do estilo de arrinque"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Configuraci�n de Internet"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"�Atopouse un conflicto potencial de enderezos da LAN na configuraci�n actual "
-"de %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "�Detectouse unha configuraci�n de firewall!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"�Atenci�n! Detectouse unha configuraci�n de firewall existente. Pode que "
-"te�a que facer alg�n arranxo manual trala instalaci�n."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Configurando..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configurando os scripts, instalando o software, iniciando os servidores..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas instalando o paquete %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Xa est� todo configurado.\n"
-"Agora pode compartir a conexi�n � Internet con outros ordenadores da rede de "
-"�rea local, usando a configuraci�n autom�tica de rede (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-#, fuzzy
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"A configuraci�n da compartici�n da conexi�n � Internet xa foi feita.\n"
-"Actualmente est� desactivada.\n"
-"\n"
-"�Que desexa facer?"
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"A configuraci�n da compartici�n da conexi�n � Internet xa foi feita.\n"
-"Actualmente est� activada."
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "A compartici�n da conexi�n � Internet est� activada"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Conexi�n e configuraci�n de Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuraci�n de rede (%d adaptadores)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Borrar perfil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Perfil para borrar:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Novo perfil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nome de m�quina: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Acceso � Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Pasarela:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Estado:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configurar o acceso � Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configuraci�n da LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Controlador"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocolo"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Estado"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configurar a rede de �rea local..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Axudante..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Por favor, agarde... Aplicando a configuraci�n"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Non conectado"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-#, fuzzy
-msgid "Disconnect..."
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configuraci�n da LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocolo de arrinque"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Iniciado o arrincar"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Activar"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Activar"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configuraci�n da conexi�n � Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configuraci�n da conexi�n � Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipo de conexi�n: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Par�metros"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Pasarela"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Tarxeta Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Establecendo o nivel de seguridade"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro de control"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Elixa a ferramenta que queira usar"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Canadiano (Qu�bec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Island�s"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "serie"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uso: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Escolla a disposici�n do seu teclado."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "�Quere que a tecla de Borrar devolva Suprimir na consola?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Mude o Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Por favor, insira o Cd-Rom de instalaci�n na unidade e prema Aceptar.\n"
-"Se non o ten, prema Cancelar para evitar a actualizaci�n "
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-#, fuzzy
-msgid "logdrake"
-msgstr "draknet"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Ficheiro/_Novo"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Ficheiro/_Abrir"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Ficheiro/_Gardar"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>G"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Ficheiro/Gardar _como"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "Ficheiro/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opci�ns"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opci�ns/Proba"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/A_xuda"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Axuda/_Acerca..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Nome de usuario"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Mensaxe inicial"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "M�quina:"
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "M�quina:"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Configuraci�n da LAN"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "shadow"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "interesante"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatando"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Configuraci�n"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Gardar como..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Escolla o seu tipo de rato."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "non se atopou ning�n serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "�Emular o terceiro bot�n?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Seleccione unha tarxeta gr�fica"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Dispositivo de arrinque"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "lendo a configuraci�n"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "lendo a configuraci�n"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Escoller a lingua"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Clase de instalaci�n"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detectar discos duros"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configurar o rato"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Escoller teclado"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Sistemas de ficheiros"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatar partici�ns"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Seleccionar paquetes"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Engadir usuario"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configurar a rede"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configurar servicios"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Cargador de arrinque"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Crear disquete de arrinque"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configurar as X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Sa�r da instalaci�n"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Adaptador %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Erro � abrir %s para escritura: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "lendo a configuraci�n"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Por favor, agarde, preparando a instalaci�n"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ordenador de rede (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Estaci�n de traballo Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Ferramentas para o seu Palm Pilot ou o seu Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estaci�n de traballo"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Encami�ador"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programas de oficina: procesadores de texto (kword, abiword), follas de "
-"c�lculo (kspread, gnumeric), visualizadores de pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Ferramentas de audio: reproductores de mp3 ou midi, mesturadores, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Libros e howtos sobre Linux e o software libre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Estaci�n de traballo KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - V�deo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conxunto de ferramentas para correo, novas, web, transferencia de ficheiros "
-"e chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Bases de datos"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "�Desexa probar a configuraci�n?"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Son"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilidades"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentaci�n"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Ferramentas de consola"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Estaci�n Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Estaci�n multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuraci�n"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "M�is escritorios gr�ficos (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"O ambiente de escritorio KDE, o ambiente gr�fico b�sico cunha colecci�n de "
-"ferramentas que o acompa�an"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Ferramentas para crear e gravar CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Estaci�n de traballo de oficina"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programas gr�ficos como o Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-"Bibliotecas de desenvolvemento en C e C++, programas e ficheiros include"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Servidor de ordenadores de rede"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Correo/Groupware/Novas"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Estaci�n de xogos"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Reproductores e editores de v�deo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Gr�ficos"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programas de divertimentos: arcade, taboleiros, estratexia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conxunto de ferramentas para ler e enviar correo e novas (pine, mutt, tin..) "
-"e para navegar na Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arquivado, emuladores, monitorizaxe"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanzas persoais"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Un ambiente gr�fico cun conxunto de aplicaci�ns amigables e ferramentas de "
-"escritorio"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Acceso � Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programas de reproducci�n/edici�n de son e v�deo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Outros escritorios gr�ficos"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editores, shells, ferramentas de ficheiro, terminais"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programas para xestionar as s�as finanzas, como o gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Xesti�n de informaci�n persoal"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - Gravaci�n de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Estaci�n de traballo cient�fica"
-
-#~ msgid "None"
-#~ msgstr "Ning�n"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Agora pode indicar as opci�ns para o m�dulo %s."
-
-#~ msgid "Low"
-#~ msgstr "Baixo"
-
-#~ msgid "Medium"
-#~ msgstr "Medio"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Poucas melloras neste nivel de seguridade, a principal � que hai m�is\n"
-#~ "avisos e comprobaci�ns de seguridade."
-
-#~ msgid "mount failed"
-#~ msgstr "mount fallou"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Linux xestiona a hora en GMT ou \"Hora do Meridiano de Greenwich\", e a\n"
-#~ "traslada � hora local dependendo da zona que vostede escolla."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Conectar � Internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Desconectar de Internet"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Configurar a conexi�n de rede (LAN ou Internet)"
-
-#~ msgid "Active"
-#~ msgstr "Activar"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Unha impresora, de modelo \"%s\", foi detectada en "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Dispositivo de impresi�n local"
-
-#~ msgid "Printer Device"
-#~ msgstr "Dispositivo da impresora"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Escolla o tama�o que quere instalar"
-
-#~ msgid "Total size: "
-#~ msgstr "Tama�o total: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Agarde, por favor, "
-
-#~ msgid "Total time "
-#~ msgstr "Tempo total "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "�Usar a configuraci�n existente para X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "�A que dispositivo est� conectada a s�a impresora?\n"
-#~ "(advirta que /dev/lp0 � equivalente a LPT1:)\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Atenci�n, o adaptador de rede xa est� configurado. Vai ser reconfigurado."
-
-#~ msgid "New"
-#~ msgstr "Novo"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Ambig�idade (%s), sexa m�is preciso\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (por omisi�n %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "�A s�a escolla? (por omisi�n %s, escriba 'none' para ningunha)"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "non se pode abrir /etc/sysconfig/autologin para lectura: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "�Desexa reiniciar a rede?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "�Concorda?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Est� a piques de se reiniciar o dispositivo de rede:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Est� a piques de se reiniciar o dispositivo de rede %s. �Concorda?"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Escolla a lingua que prefira para a instalaci�n e para o sistema."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Ten que aceptar os termos da licencia de enriba para continuar coa "
-#~ "instalaci�n.\n"
-#~ "\n"
-#~ "\n"
-#~ "Por favor, prema \"Aceptar\" se concorda con eses termos.\n"
-#~ "\n"
-#~ "\n"
-#~ "Por favor, prema \"Rexeitar\" se non concorda con eses termos. A "
-#~ "instalaci�n rematar� sen modificar a s�a configuraci�n actual."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Escolla a disposici�n do teclado que corresponda � seu na lista"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Se desexa ter outras linguas (� parte da que escolleu � principio da\n"
-#~ "instalaci�n) dispo�ibles trala instalaci�n, esc�llaas na lista de "
-#~ "enriba.\n"
-#~ "Se quere seleccionar todas, s� ten que usar \"Todas\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Seleccione:\n"
-#~ "\n"
-#~ "  - Personalizada: Se xa est� familiarizado con GNU/Linux, pode ent�n "
-#~ "escoller\n"
-#~ "    o uso principal da s�a m�quina. Mire embaixo para os detalles.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Experto: Isto sup�n que vostede manexa ben GNU/Linux e quere facer\n"
-#~ "    unha instalaci�n altamente personalizada. Do mesmo xeito que coa\n"
-#~ "    clase de instalaci�n \"Personalizada\", poder� escoller o uso do seu\n"
-#~ "    sistema. Pero, por favor, �NON ESCOLLA ISTO A MENOS QUE SAIBA O QUE\n"
-#~ "    EST� A FACER!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Agora ten que definir o uso da s�a m�quina. As escollas son:\n"
-#~ "\n"
-#~ "* Estaci�n de traballo: esta � a escolla ideal se pretende usar a s�a "
-#~ "m�quina principalmente para o uso coti�n,\n"
-#~ "  na oficina ou na casa.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Desenvolvemento: se pretende usar a s�a m�quina principalmente para o "
-#~ "desenvolvemento de software, esta � unha boa escolla.\n"
-#~ "  Ter� unha completa colecci�n de software instalado para compilar, "
-#~ "depurar e formatar c�digo fonte, ou\n"
-#~ "  para crear paquetes de software.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Servidor: se pretende usar esta m�quina coma servidor, � a escolla "
-#~ "correcta. Sexa un servidor de ficheiros (NFS\n"
-#~ "  ou SMB), un servidor de impresi�n (estilo Unix ou Microsoft Windows), "
-#~ "un servidor de autenticaci�n (NIS), un servidor\n"
-#~ "  de bases de datos, etc... Como tal, non espere que haxa cousas como "
-#~ "KDE, GNOME, etc. instaladas."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Agora pode selecciona-lo grupo de paquetes que desexa instalar\n"
-#~ "ou actualizar.\n"
-#~ "\n"
-#~ "DrakX comprobar� se ten espacio dabondo para instalalos todos. Se non,\n"
-#~ "avisaralle diso. Se quere seguir a�nda as�, proceder� coa instalaci�n\n"
-#~ "de t�dolos grupos seleccionados, pero deixar� alg�n de menor interese.\n"
-#~ "� final da lista pode marca-la opci�n \"Selecci�n individual de paquetes"
-#~ "\";\n"
-#~ "neste caso ter� que percorrer m�is de 1000 paquetes..."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Se ten t�dolos CDs da lista superior, prema Aceptar. Se non ten\n"
-#~ "ning�n deses CDs, prema Cancelar. Se s� faltan alg�ns dos CDs,\n"
-#~ "desm�rqueos, e prema Aceptar."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Acenda o seu m�dem e escolla o correcto."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Vostede pode agora introduci-las opci�ns de chamada. Se non est� seguro "
-#~ "de\n"
-#~ "que escribir, a informaci�n correcta pode obtela do seu ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Introduza:\n"
-#~ "\n"
-#~ "  - Direcci�n IP: se non a co�ece, preg�ntelle � seu administrador de "
-#~ "rede\n"
-#~ "ou ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - M�scara de Rede: \"255.255.255.0\" � normalmente unha boa elecci�n. "
-#~ "Se\n"
-#~ "non est� seguro, pregunte � seu administrador de rede ou ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - IP autom�tica: Se a s�a rede usa o protocolo bootp ou dhcp, escolla\n"
-#~ "esta opci�n. Neste caso, non � necesario ning�n valor en \"Direcci�n IP"
-#~ "\".\n"
-#~ "Se non est� seguro, pregunte � seu administrador de rede ou ISP.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Se a s�a rede usa NIS, escolla \"Usar NIS\". Se non o sabe, preg�ntelle "
-#~ "�\n"
-#~ "seu administrador de rede."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Agora pode introducir as opci�ns de marcado. Se non est� seguro do\n"
-#~ "que escribir, a informaci�n correcta pode obtela do seu ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Se vai usar proxys, config�reos agora. Se non sabe se vai usar proxys,\n"
-#~ "pregunte � seu administrador de rede ou � seu ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Pode instalar paquetes de criptograf�a se xa configurou a s�a conexi�n a\n"
-#~ "internet correctamente. Primeiro escolla un espello do que quere baixa-"
-#~ "los\n"
-#~ "paquetes, e ent�n escolla os paquetes que desexa instalar.\n"
-#~ "\n"
-#~ "Perc�tese de que ten que escolle-lo espello e os paquetes criptogr�ficos\n"
-#~ "de acordo coa s�a lexislaci�n."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr ""
-#~ "Agora pode seleccionar a zona horaria dependendo do lugar onde viva."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Agora pode introduci-lo contrasinal do superusuario para o seu sistema\n"
-#~ "Mandrake Linux. O contrasinal deber� ser tecleado d�as veces para\n"
-#~ "comprobar que �mbolos dous son id�nticos.\n"
-#~ "\n"
-#~ "\n"
-#~ "O superusuario (root) � o administrador do sistema, e � o �nico usuario\n"
-#~ "� que se lle permete modifica-la configuraci�n do sistema. �Por tanto,\n"
-#~ "escolla o contrasinal con coidado! O uso non autorizado da conta de root\n"
-#~ "pode ser extremadamente perigoso para a integridade do sistema e os seus\n"
-#~ "datos, e para os outros sistemas conectados a el. O contrasinal deber�a\n"
-#~ "ser unha mestura de caracteres alfanum�ricos e de 8 caracteres de longo,\n"
-#~ "polo menos. NUNCA debe ser anotado. Non escolla un contrasinal longo\n"
-#~ "de m�is ou complicado: ten que ser capaz de lembralo sen moito esforzo."
-
-# Non � realmente fuzzy, � s� para revisala. :)
-#, fuzzy
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Pode agora crear unha ou varias contas de usuarios �normais�, como\n"
-#~ "contraposici�n � conta de usuario �privilexiado�, root. Vostede\n"
-#~ "pode crear unha ou m�is contas para cada persoa � que vostede queira\n"
-#~ "permitirlle o uso do ordenador. Note que cada conta de usuario ter�\n"
-#~ "as s�as preferencias (ambiente gr�fico, configuraci�n dos programas, "
-#~ "etc.)\n"
-#~ "e o seu propio directorio (chamado \"home\"), no que se almacenan esas\n"
-#~ "preferencias.\n"
-#~ "\n"
-#~ "\n"
-#~ "Antes que nada, �cree unha conta para vostede mesmo! A�nda se � a �nica\n"
-#~ "persoa que vai usa-la m�quina, NON debe entrar como root para o uso\n"
-#~ "diario do sistema: � un risco de seguridade elevado. Facer que o\n"
-#~ "sistema fique totalmente inoperante, pode ser moitas veces causa dun\n"
-#~ "simple erro � teclear.\n"
-#~ "\n"
-#~ "\n"
-#~ "Polo tanto, debe entrar no sistema usando a conta de usuario normal que\n"
-#~ "vai crear aqu�, e entrar como root s� para as tarefas de administraci�n\n"
-#~ "que o precisen."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "As opci�ns principais do LILO e do grub son:\n"
-#~ "  - Dispositivo de arrinque: Establece o nome do dispositivo (p.ex unha\n"
-#~ "partici�n dun disco duro) que cont�n o sector de arrinque. A menos que\n"
-#~ "saiba espec�ficamente que � outro, escolla \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Retardo antes de arrinca-la imaxe por omisi�n: Indica o n�mero de\n"
-#~ "d�cimas de segundo que agardar� o cargador de inicio antes de arrincar a\n"
-#~ "primeira imaxe. Isto � �til nos sistemas que arrincan inmediatamente do\n"
-#~ "disco duro tras activa-lo teclado. O boot loader non agarda se o \"retardo"
-#~ "\"\n"
-#~ "� cero ou non se indica.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Modo de v�deo: Indica o modo de texto VGA que ser� utilizado �\n"
-#~ "arrincar. Os seguintes valores est�n dispo�ibles:\n"
-#~ "    * normal: escoller modo de texto normal 80x25.\n"
-#~ "    * <n�mero>: usa-lo modo de texto correspondente."
-
-#, fuzzy
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "LILO (O LInux LOader) e Grub son cargadores de arrinque: poden arrincar\n"
-#~ "Linux ou outro sistema operativo presente no seu ordenador.\n"
-#~ "Normalmente, estes outros sitemas son detectados correctamente e "
-#~ "instalados.\n"
-#~ "Se non � o caso, pode engadir unha entrada a man nesta pantalla. Sexa\n"
-#~ "coidadoso na escolla dos par�metros correctos.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tam�n pode non querer dar acceso a eses outros sitemas operativos a "
-#~ "calquera,\n"
-#~ "poidendo borrar as entradas correspondentes. Pero neste caso, precisar�\n"
-#~ "un disquete de arrinque para poder usalos."
-
-#, fuzzy
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "As opci�ns principais do LILO e do grub son:\n"
-#~ "  - Dispositivo de arrinque: Establece o nome do dispositivo (p.ex unha\n"
-#~ "partici�n dun disco duro) que cont�n o sector de arrinque. A menos que\n"
-#~ "saiba espec�ficamente que � outro, escolla \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Retardo antes de arrinca-la imaxe por omisi�n: Indica o n�mero de\n"
-#~ "d�cimas de segundo que agardar� o cargador de inicio antes de arrincar a\n"
-#~ "primeira imaxe. Isto � �til nos sistemas que arrincan inmediatamente do\n"
-#~ "disco duro tras activa-lo teclado. O boot loader non agarda se o \"retardo"
-#~ "\"\n"
-#~ "� cero ou non se indica.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Modo de v�deo: Indica o modo de texto VGA que ser� utilizado �\n"
-#~ "arrincar. Os seguintes valores est�n dispo�ibles:\n"
-#~ "    * normal: escoller modo de texto normal 80x25.\n"
-#~ "    * <n�mero>: usa-lo modo de texto correspondente."
-
-#, fuzzy
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Agora � o momento de configura-lo sistema de fiestras X, que �\n"
-#~ "o centro da interface gr�fica de Linux. Para iso necesita configura-\n"
-#~ "-la s�a tarxeta de v�deo e o seu monitor. A maior�a deses pasos est�n\n"
-#~ "automatizados, as� que probablemente a s�a tarea limitarase a verificar\n"
-#~ "o que se fixo e aceptar a configuraci�n proposta :-)\n"
-#~ "\n"
-#~ "\n"
-#~ "Cando a configuraci�n estea rematada, lanzarase o servidor X\n"
-#~ "(a menos que vostede lle pida a DrakX que non), de xeito que\n"
-#~ "poida comprobar se todo est� ben e corresponde � que desexa.\n"
-#~ "Se non, pode voltar atr�s e troca-la configuraci�n; tantas\n"
-#~ "veces como sexa necesario."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Se algo vai mal coa configuraci�n de X, use estas opci�ns para "
-#~ "configurar\n"
-#~ "correctamente o sistema X Window."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Se prefire usar un login gr�fico, escolla \"Si\". Doutro xeito,\n"
-#~ "seleccione \"Non\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "O sistema vaise reiniciar.\n"
-#~ "\n"
-#~ "Despois de reiniciar, o seu novo sistema Mandrake Linux cargarase\n"
-#~ "automaticamente. Se vostede quere iniciar outro sistema operativo que xa\n"
-#~ "exista, lea as instrucci�ns adicionais."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Checo (Programadores)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Eslovaco (Programadores)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Nome do perfil para crear:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Escribir /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formatar todas"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Logo de formatar t�dalas partici�ns,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "perderanse os datos nesas partici�ns"
-
-#~ msgid "Reload"
-#~ msgstr "Recargar"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "�Quere realmente xerar un disquete de instalaci�n para replicar linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Configuraci�n de ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Cun servidor CUPS remoto, non ter� que configurar aqu�\n"
-#~ "ningunha impresora, xa que ser�n detectadas automaticamente,\n"
-#~ "a menos que te�a un servidor nunha rede diferente. Neste\n"
-#~ "caso, ter� que indicar o enderezo IP do servidor de CUPS\n"
-#~ "e opcionalmente o n�mero de porto."
-
-#~ msgid "Remote queue"
-#~ msgstr "Fila de impresi�n remota"
-
-#~ msgid "Profile "
-#~ msgstr "Perfil "
-
-#~ msgid "NetWare"
-#~ msgstr "Impresora Netware"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Non foi posible interpretar o contido do ficheiro de configuraci�n."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Ficheiro de configuraci�n non reco�ecido"
-
-#~ msgid "Adapter"
-#~ msgstr "Adaptador"
-
-#~ msgid "Disable network"
-#~ msgstr "Desactivar a rede"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Conexi�n DSL (ou ADSL)"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Pode especificar directamente o URI para acceder � impresora co CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Si, imprimir unha p�xina ASCII de proba"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Si, imprimir unha p�xina PostScript de proba"
-
-#~ msgid "Paper Size"
-#~ msgstr "Tama�o do papel"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "�Extraer a p�xina trala impresi�n?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opci�ns do controlador Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opci�ns da profundidade de cor"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "�Imprimir texto como PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "�Corrixir o efecto escaleira?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "N�mero de p�xinas por p�xina de sa�da"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Marxes dereita/esquerda en puntos (1/72 dunha polgada)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Marxes superior/inferior en puntos (1/72 dunha polgada)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Opci�ns extra do Ghostscript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Opci�ns extra para texto"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inverter a orde das p�xinas"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Seleccionar a conexi�n � impresora remota"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Cada impresora necesita un nome (por exemplo lp).\n"
-#~ "P�dense definir outros par�metros como a descrici�n da\n"
-#~ "impresora ou a s�a localizaci�n. �Que nome quere usar para\n"
-#~ "esta impresora e como est� conectada?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Cada fila de impresi�n (� que se dirixen os traballos de impresi�n)\n"
-#~ "necesita un nome (frecuentemente lp) e un directorio spool asociado\n"
-#~ "a el. �Qu� nome e directorio quere que se utilicen para esta fila e como\n"
-#~ "est� conectada a impresora?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nome da fila"
-
-#~ msgid "Spool directory"
-#~ msgstr "Directorio spool"
-
-#~ msgid "Disable"
-#~ msgstr "Desactivar"
-
-#~ msgid "Enable"
-#~ msgstr "Activar"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Para ter un sistema m�is seguro, deber�a seleccionar \"Usar ficheiro "
-#~ "shadow\"\n"
-#~ "e \"Usar contrasinais MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Se a s�a rede usa NIS, escolla \"Usar NIS\". Se non o sabe, preg�ntelle "
-#~ "�\n"
-#~ "seu administrador de rede."
-
-#~ msgid "yellow pages"
-#~ msgstr "p�xinas amarelas (yp)"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Dns 1 do provedor"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Dns 2 do provedor"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "�Como quere conectar � Internet?"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Configuraci�n do estilo de arrinque"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Vostede pode agora escoller algunhas opci�ns diversas para o sistema.\n"
-#~ "\n"
-#~ "  - Usar optimizaci�ns de disco duro: esta opci�n pode mellora-lo "
-#~ "rendemento\n"
-#~ "    do disco duro, pero � s� para usuarios avanzados: alg�ns chipsets que "
-#~ "non\n"
-#~ "    funcionan ben poden estraga-los seus datos. O kernel ten unha lista "
-#~ "negra\n"
-#~ "    de unidades e chipsets, pero se quere evitar sorpresas "
-#~ "desagradables,\n"
-#~ "    deixe esta opci�n desactivada.\n"
-#~ "\n"
-#~ "  - Escoller un nivel de seguridade: pode escoller un nivel de "
-#~ "seguridade\n"
-#~ "    para o seu sistema. Vaia � manual para informaci�n completa. "
-#~ "Basicamente:\n"
-#~ "    se non sabe cal, escolla \"Medio\"; se quere realmente ter unha "
-#~ "m�quina\n"
-#~ "    segura, escolla \"Paranoico\", pero te�a coidado: �NESTE NIVEL, ROOT "
-#~ "NON\n"
-#~ "    PODE FACER LOGIN NA CONSOLA! Se quere ser root, ter� que facer login "
-#~ "como\n"
-#~ "    usuario e ent�n usar \"su\". M�is xeralmente, non agarde usa-la s�a\n"
-#~ "    m�quina para outra cousa que non sexa un servidor. Xa foi avisado.\n"
-#~ "\n"
-#~ "  - Tama�o exacto da memoria se se necesita: por desgracia, no mundo "
-#~ "actual\n"
-#~ "    de PCs, non hai un m�todo est�ndar para preguntarlle � BIOS acerca "
-#~ "da\n"
-#~ "    cantidade de RAM no seu ordenador. Por iso, Linux pode non ser capaz "
-#~ "de\n"
-#~ "    detectar correctamente a cantidade de RAM. Se � o caso, indique a\n"
-#~ "    cantidade correcta. Nota: unha diferencia de 2 ou 4 MB � normal.\n"
-#~ "\n"
-#~ "  - Automonta-las unidades extra�bles: Se vostede prefere non montar\n"
-#~ "    manualmente as unidades extra�bles (CD-ROM, disquete, Zip), "
-#~ "escribindo\n"
-#~ "    \"mount\" e \"umount\", escolla esta opci�n.\n"
-#~ "\n"
-#~ "  - Activar Bloq Num � iniciar: Se quere que Bloq Num estea activado\n"
-#~ "    tralo arrinque, escolla esta opci�n (Nota: Bloq Num pode ou non pode\n"
-#~ "    funcionar nas X)."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Varios"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Dependencias autom�ticas"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Tama�o seleccionado %d%s"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Preguntas varias"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Non se pode usar o supermount no nivel de seguridade alto"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "atenci�n: NESTE NIVEL DE SEGURIDADE, A AUTENTICACI�N DO ROOT NA CONSOLA\n"
-#~ "NON EST� PERMITIDA!  Se quere ser root, ter� que conectar coma\n"
-#~ "usuario e logo usar o \"su\".  De xeito m�is xeral, non agarde que a\n"
-#~ "m�quina act�e doutro modo distinto a un servidor.\n"
-#~ "Xa foi avisado."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Te�a coidado, ter o bloqueo num�rico activado causa que moitas teclas\n"
-#~ "dean d�xitos en vez de letras normais (p.ex: premer `p' d� un `6')"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Desculpe, a configuraci�n do correo a�nda non est� implementada. Sexa "
-#~ "paciente."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Benvido � axudante da configuraci�n de rede.\n"
-#~ "�Que compo�entes desexa configurar?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Acceso a Internet/Rede"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Agora que a conexi�n � Internet est� configurada,\n"
-#~ "o seu ordenador pode ser configurado para compartila.\n"
-#~ "Nota: Necesita un adaptador de rede dedicado para configurar unha rede de "
-#~ "�rea local (LAN).\n"
-#~ "\n"
-#~ "�Desexa configurar a compartici�n da conexi�n � Internet?\n"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr ""
-#~ "Este script de inicializaci�n tenta cargar os m�dulos para o rato usb."
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Configuraci�n do LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Creaci�n dun disquete de arrinque"
-
-#~ msgid "Choice"
-#~ msgstr "Escolla"
-
-#~ msgid "Actions"
-#~ msgstr "Acci�ns"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Aplicaci�ns cient�ficas"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Ficheiro/Impresi�n/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "DNS/DHCP "
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "�Que cargador(es) de arrinque quere usar?"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Zona horaria"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Disquete de auto-instalaci�n"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Usar diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Personalizada"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "�Est� seguro de que � un experto? \n"
-#~ "Permitir�selle facer cousas m�is potentes pero perigosas.\n"
-#~ "V�nselle preguntar cuesti�ns como: ``�Usar ficheiro shadow para os "
-#~ "contrasinais?'', �est� preparado para responder a este tipo de cuesti�ns?"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "�Cal � o uso do seu sistema?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Escolla o tama�o que quere instalar"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Usar ficheiro shadow"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Usar contrasinais MD5"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(pode provocar corrupci�n dos datos)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Activar Bloq Num � iniciar"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Confirmar Contrasinal"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Atopouse unha tarxeta RDSI:\n"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "�Desexa que se tente atopar un m�dem?"
-
-#~ msgid "Other countries"
-#~ msgstr "Outros pa�ses"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "�En que pa�s se atopa vostede?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "M�dem alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "M�dem ECI"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "Se o seu m�dem adsl � Alcatel, escolla Alcatel. Doutro xeito, ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "non usar pppoe"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Desactivar a Conexi�n a Internet"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Configurar a conexi�n a Internet / Configurar a Rede local"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "A rede local xa foi configurada.\n"
-#~ "Desexa:"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (importante)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (moi bo)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (bo)"
-
-#~ msgid "using module"
-#~ msgstr "usando un m�dulo"
-
-#~ msgid "Search"
-#~ msgstr "Buscar"
-
-#~ msgid "Package"
-#~ msgstr "Paquete"
-
-#~ msgid "Tree"
-#~ msgstr "�rbore"
-
-#~ msgid "Sort by"
-#~ msgstr "Ordenar por"
-
-#~ msgid "Category"
-#~ msgstr "Categor�a"
-
-#~ msgid "Installed packages"
-#~ msgstr "Paquetes instalados"
-
-#~ msgid "Available packages"
-#~ msgstr "Paquetes dispo�ibles"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Amosar s� as p�las"
-
-#~ msgid "Expand all"
-#~ msgstr "Expandir todos"
-
-#~ msgid "Collapse all"
-#~ msgstr "Pechar todos"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Engadir localizaci�n dos paquetes"
-
-#~ msgid "Update location"
-#~ msgstr "Actualizar lugar"
-
-#~ msgid "Configuration: Add Location"
-#~ msgstr "Configuraci�n: Engadir Lugar"
-
-#~ msgid "Find Package"
-#~ msgstr "Buscar Paquete"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Buscar paquete que conte�a un ficheiro"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Trocar entre Instalado e Dispo�ible"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Comprobando dependencias"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Os seguintes paquetes van ser desinstalados"
-
-#~ msgid "Regexp"
-#~ msgstr "Expr.Reg"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Que paquetes buscar"
-
-#~ msgid "No match"
-#~ msgstr "Sen coincidencias"
-
-#~ msgid "No more match"
-#~ msgstr "Non hai m�is coincidencias"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake est� en modo ``baixa memoria''.\n"
-#~ "Vaise reiniciar rpmdrake para permitir a busca de ficheiros"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "�Que ficheiro est� a buscar?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "�Que est� a buscar?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Dea un nome (ex: `extra', `commercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Directorio"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Non hai cdrom dispo�ible (nada en /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL do directorio que cont�n os RPMs"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Para FTP e HTTP, ten que indicar o lugar de hdlist\n"
-#~ "Ten que ser relativo � URL anterior"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Por favor, env�e a seguinte informaci�n"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s xa est� en uso"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Actualizando a base de RPMs"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Vaise borra-la entrada %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Buscando as p�las"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "A busca das p�las leva un tempo"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Manipulaci�n de Gr�ficos"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, bibliotecas, ferramentas"
-
-#~ msgid "Development applications"
-#~ msgstr "Aplicaci�ns de desenvolvemento"
-
-#~ msgid "Sciences"
-#~ msgstr "Ciencias"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Programas de Chat (IRC ou mensaxer�a instant�nea) como o xchat, licq, "
-#~ "gaim e ferramentas de transferencia de ficheiros"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Facilidades de Comunicaci�n"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Development other"
-#~ msgstr "Outros de desenvolvemento"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Clientes e servidores de Bases de Datos (mysql e postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Desenvolvemento en C/C++"
-
-#~ msgid "Czech"
-#~ msgstr "Checo"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "�A qu� porto serie est� conectado o rato?"
diff --git a/perl-install/share/po/help_xml2pm.pl b/perl-install/share/po/help_xml2pm.pl
deleted file mode 100755
index 932b5943f..000000000
--- a/perl-install/share/po/help_xml2pm.pl
+++ /dev/null
@@ -1,218 +0,0 @@
-#!/usr/bin/perl -w
-
-use XML::Parser;
-use MDK::Common;
-
-my $help;
-my $dir = "doc/manual/literal/drakx";
-my $xsltproc = "/usr/bin/xsltproc";
-
-if ( ! -x "$xsltproc" ){
-    print "You need to have \"$xsltproc\" - ";
-    print "so type \"urpmi libxslt-proc\" please.\n";
-    exit 1;
-}
-my @langs = grep { /^..$/ && -e "$dir/$_/drakx-help.xml" } all($dir) or die "no XML help found in $dir\n";
-
-my %helps = map {
-    my $lang = $_;
-    my $p = new XML::Parser(Style => 'Tree');
-    open F, "$xsltproc id.xsl $dir/$lang/drakx-help.xml|";
-    my $tree = $p->parse(*F);
-
-    $lang => rewrite2(rewrite1(@$tree), $lang);
-} @langs;
-
-my $base = delete $helps{en} || die;
-save_help($base);
-
-foreach my $lang (keys %helps) {
-    print "Now transforming: $lang\n";
-    local *F;
-    my ($charset) = cat_("$lang.po") =~ /charset=([^\\]+)/ or die "missing charset in $lang.po\n";
-    open F, "| iconv -f utf8 -t $charset//TRANSLIT > help-$lang.pot";
-    #open F, "|cat - > help-$lang.pot";
-    print F "\n";
-    foreach my $id (keys %{$helps{$lang}}) {
-	$base->{$id} or die "$lang:$id doesn't exist in english\n";
-	print F qq(# DO NOT BOTHER TO MODIFY HERE, SEE:\n# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/$lang/drakx-help.xml\n);
-	print F qq(msgid ""\n");
-	print F join(qq(\\n"\n"), split "\n", $base->{$id});
-	print F qq("\nmsgstr ""\n");
-	print F join(qq(\\n"\n"), split "\n", $helps{$lang}{$id});
-	print F qq("\n\n);
-    }
-}
-unlink(".memdump");
-
-sub save_help {
-    my ($help) = @_;
-    local *F;
-    open F, "| LC_ALL=fr iconv -f utf8 -t ascii//TRANSLIT > ../../help.pm";
-    print F q{package help;
-use common;
-
-# IMPORTANT: Don't edit this File - It is automatically generated 
-#            from the manuals !!! 
-#            Write a mail to <documentation@mandrakesoft.com> if
-#            you want it changed.
-
-%steps = (
-empty => '',
-};
-    print F qq(
-$_ => 
-__("$help->{$_}"),
-) foreach sort keys %$help;
-    print F ");\n";
-}
-
-# i don't like the default tree format given by XML::Parser,
-# rewrite it in my own tree format
-sub rewrite1 {
-    my ($tag, $tree) = @_;
-    my ($attr, @nodes) = @$tree;
-    my @l;
-    while (@nodes) {
-	my ($tag, $tree) = splice(@nodes, 0, 2);
-	if ($tag eq '0') {
-	    foreach ($tree) {
-		s/\s+/ /gs;
-		s/"/\\"/g;
-	    }
-	    push @l, $tree
-	} elsif ($tag eq 'screen') {
-	    $tree->[1] eq '0' or die "screen tag contains non CDATA\n";
-	    push @l, $tree->[2];
-	} else {
-	    push @l, rewrite1($tag, $tree);
-	}
-    }
-    { attr => $attr, tag => lc $tag, children => \@l };
-}
-
-# return the list of nodes named $tag
-sub find {
-    my ($tag, $tree) = @_;
-    if (!ref($tree)) {
-	();
-    } elsif ($tree->{tag} eq $tag) {
-	$tree;
-    } else {
-	map { find($tag, $_) } @{$tree->{children}};
-    }
-}
-
-sub rewrite2 {
-    use utf8;
-    my ($tree, $lang) = @_;
-    our $i18ned_open_text_quote  = $ {{ 
-	fr => "« ",
-	de => "„",
-	es => "\\\"",
-	it => "''",
-	}}{$lang};
-    our $i18ned_close_text_quote = $ {{ 
-	fr => " »",
-	de => "“",
-	es => "\\\"",
-	it => "''",
-	}}{$lang};
-    our $i18ned_open_label_quote  = $ {{ fr => "« ", de => "„"}}{$lang};
-    our $i18ned_close_label_quote = $ {{ fr => " »", de => "“"}}{$lang};
-    our $i18ned_open_command_quote  = $ {{ fr => "« ", de => "„"}}{$lang};
-    our $i18ned_close_command_quote = $ {{ fr => " »", de => "“"}}{$lang};
-    our $i18ned_open_input_quote  = $ {{ fr => "« ", de => "»"}}{$lang};
-    our $i18ned_close_input_quote = $ {{ fr => " »", de => "«"}}{$lang};
-    our $i18ned_open_key_quote  = $ {{ de => "["}}{$lang};
-    our $i18ned_close_key_quote = $ {{ de => "]"}}{$lang};
-    # rewrite2_ fills in $help
-    $help = {};
-    rewrite2_($tree);
-    $help;
-}
-
-sub rewrite2_ {
-    my ($tree) = @_;
-    ref($tree) or return $tree;
-
-    my $text = do {
-	my @l = map { rewrite2_($_) } @{$tree->{children}};
-	my $text = "";
-	foreach (grep { !/^\s*$/ } @l) {
-	    s/^ // if $text =~ /\s$/;
-	    $text =~ s/ $// if /^\s/;
-	    $text =~ s/\n+$// if /^\n/;
-	    $text .= $_;
-	}
-	$text;
-    };
-
-    if (0) {
-    } elsif (member($tree->{tag}, 'formalpara', 'para', 'itemizedlist', 'orderedlist')) {
-	$text =~ s/^\s(?!\s)//;
-	$text =~ s/^( ?\n)+//;
-	$text =~ s/\s+$//;
-	qq(\n$text\n);
-    } elsif (member($tree->{tag}, 'quote', 'citetitle', 'foreignphrase')) {
-	($i18ned_open_text_quote || "``") . $text . ($i18ned_close_text_quote || "''");
-    } elsif (member($tree->{tag}, 'guilabel', 'guibutton', 'guimenu', 'literal', 'filename')) {
-	($i18ned_open_label_quote || "\\\"") . $text . ($i18ned_close_label_quote || "\\\"");
-    } elsif ($tree->{tag} eq 'command') {
-	($i18ned_open_command_quote || "\\\"") . $text . ($i18ned_close_command_quote || "\\\"");
-    } elsif ($tree->{tag} eq 'userinput') {
-	($i18ned_open_input_quote || ">>") . $text . ($i18ned_close_input_quote || "<<");
-    } elsif ($tree->{tag} eq 'keycap') {
-	($i18ned_open_key_quote || "[") . $text . ($i18ned_close_key_quote || "]");
-    } elsif (member($tree->{tag}, 'keysym')) {
-	qq($text);
-    } elsif (member($tree->{tag}, 'footnote')) {
-	'(*)'
-    } elsif ($tree->{tag} eq 'warning') {
-	$text =~ s/^(\s+)/$1!! /;
-	$text =~ s/(\s+)$/ !!$1/;
-	$text;
-    } elsif ($tree->{tag} eq 'listitem') {
-	my $cnt;
-	$text =~ s/^\s+//;
-	$text =~ s/^/' ' . ($cnt++ ? '  ' : '* ')/emg;
-	"\n$text\n";
-
-    } elsif (member($tree->{tag},  
-		    'acronym', 'application', 'emphasis',  
-		    'keycombo', 'note', 
-		    'superscript', 'systemitem', 
-		    'tip', 'ulink', 'xref' 
-		   )) {
-	# ignored tags
-	$text;
-    } elsif (member($tree->{tag},
-		    'title', 'article', 'primary', 'secondary', 
-		    'indexterm', 
-		   )) {
-	# dropped tags
-	'';
-    } elsif ($tree->{tag} eq 'sect1') {
-	$text =~ s/^\s+//;
-
-	my @footnotes = map { 
-	    my $s = rewrite2_({ %$_, tag => 'para' });
-	    $s =~ s/^\s+//;
-	    "(*) $s";
-	} find('footnote', $tree);
-	$help->{$tree->{attr}{id}} = aerate($text . join('', @footnotes));
-	'';
-    } elsif ($tree->{tag} eq 'screen') {
-	qq(\n$text\n);
-    } else {
-	die "unknown tag $tree->{tag}\n";
-    }
-}
-
-sub aerate {
-    my ($s) = @_;
-    #- the warp_text column is adjusted so that xgettext do not wrap text around
-    #- which cause msgmerge to add a lot of fuzzy
-    my $s2 = join("\n\n", map { join("\n", warp_text($_, 75)) } split "\n", $s);
-    $s2;
-}
diff --git a/perl-install/share/po/hr.po b/perl-install/share/po/hr.po
deleted file mode 100644
index 20347847b..000000000
--- a/perl-install/share/po/hr.po
+++ /dev/null
@@ -1,11819 +0,0 @@
-# KTranslator Generated File
-# Copyright (c) 1999 MandrakeSoft
-# Vladimir Vuksan <vuksan@veus.hr>, 1999.
-# Vlatko Kosturjak <kost@iname.com>, 2001.
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-13 06:59CET\n"
-"Last-Translator: Vlatko Kosturjak <kost@iname.com>\n"
-"Language-Team: Croatian <lokalizacija@linux.hr>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Podesi sve zaslone nezavisno"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Koristi Xinerama pro�irenje"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Podesi samo karticu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Vi�e-zaslonska postava"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Va� sustav podr�ava postavu sa vi�e zaslona.\n"
-"�to �elite napraviti?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafi�ka kartica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Odaberite grafi�ku karticu"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Odaberite X poslu�itelj"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X poslu�itelj"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Odaberite X upravlja�ki program"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X upravlja�ki program"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Koju konfiguraciju XFree-a �elite imati?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va�a video kartica mo�e imati 3D ubrzanje samo sa XFree %s.\n"
-"Va�a kartica je podr�ana od XFree %s koji mo�da ima bolju podr�ku u 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Va�a kartica mo�e imati 3D hardware-sku akceleraciju sa XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s sa 3D hardware akceleracijom"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Va�a kartica mo�e imati 3D hadware akceleraciju podr�anu od XFree %s,\n"
-"UPOZORAVAMO VAS DA JE OVO EKSPERIMENTALNA PODR�KA I MO�E ZAMRZNUTI VA�E "
-"RA�UNALO."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s sa EXPERIMENTALNOM 3D hardware akceleracijom"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va�a video kartica mo�e imati 3D ubrzanje samo sa XFree %s,\n"
-"UPOZORAVAMO VAS DA JE OVO EKSPERIMENTALNA PODR�KA I MO�E ZAMRZNUTI VA�E "
-"RA�UNALO.Va�a kartica je podr�ana od XFree %s koja mo�e imati bolju podr�ku "
-"u 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalacijski zaslonski upravlja�ki program)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree postavke"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Odaberite koli�inu memorije na grafi�koj kartici"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Postavke poslu�itelja"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Odaberite monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva kriti�na parametra su vertikalna vrijednost osvje�avanja, koja je "
-"vrijednost\n"
-"u kojoj se cijeli zaslon osvje�ava, i najva�nije horizontalna\n"
-"vrijednost osvje�avanja koja ja vrijednost u kojoj se svaka linija "
-"prikazuje.\n"
-"\n"
-"JAKO JE VA�NO da ne specifirate tip monitora kod kojega je raspon "
-"osvje�avanja\n"
-"ve�i od mogu�nosti va�eg monitora jer mo�ete o�tetiti va� monitor.\n"
-" Ukoliko ste u nedoumici, izaberite konzervativne postavke."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontalna vrijednost osvje�avanja"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikalna vrijednost osvje�avanja"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Niste podesili monitor"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Niste podesili grafi�ku karticu"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Niste podesili rezoluciju"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Da li �elite isku�ati postavu ?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Upozorenje: testiranje grafi�ke kartice mo�e zamrzunti va�e ra�unalo"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Isku�aj postavu"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"provjerite parametre koje ste unjeli"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Pojavila se gre�ka:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Zatvaram nakon %d sekundi"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Pojavila se gre�ka, provjerite parametre koje ste unjeli"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rezolucija"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Odaberite rezoluciju  i color depth"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafi�ka kartica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 poslu�itelj: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Vi�e"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "U redu"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspertni mod"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Poka�i sve"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rezolucije"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Raspored tipkovnice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Vrsta mi�a: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Ure�aj mi�a: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizontalna Sinkronizacija Monitora: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertikalno Osvje�enje Monitora: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafi�ka kartica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikacija grafi�ke kartice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafi�ka memorija: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Dubina boje: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolucija: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 poslu�itelj: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 upravlja�ki program: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Pripremam X-Window postavu"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "�to �elite napraviti?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Promijeni monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Promijeni grafi�ku karticu"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Promijeni postavke poslu�itelja"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Promijeni rezoluciju"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Prika�i informacije"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Isku�aj ponovo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Zavr�i"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zadr�i promjene?\n"
-"Trenutna postava je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X kod pokretanja sustava"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mogu podesiti da se X podigne automatski kod podizanja sustava.\n"
-"Da li �elite da se X automatski pokre�e?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Molim ponovo se logirajte u %s kako bi aktivirali promjenjeno"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Molim prvo se odjavite te pritisnite Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 boja (8 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tisu�a boja (15 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tisu�a boja (16 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milijuna boja (24 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde boja (32 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB ili vi�e"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardni VGA, 640x480 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibilan, 1024x768 na 87 Hz s preplitanjem (bez 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 na 87 Hz s preplitanjem, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Pro�ireni Super VGA, 800x600 na 60 Hz, 640x480 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Bez preplitanja SVGA, 1024x768 na 60 Hz, 800x600 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Visoko frekvencijski SVGA, 1024x768 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekvencijski koji ide do 1280x1024 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekvencijski koji ide do 1280x1024 na 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekvencijski koji ide do 1280x1024 na 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor koji ide do 1600x1200 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor koji ide do 1600x1200 na 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Prvi sektor boot particije"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor pogona (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO instalacija"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Gdje �elite instalirati bootloader?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalacija"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO sa tekstualnim menijem"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO sa grafi�kim menijem"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Podizanje sa DOS/Windows-a (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Glavne postavke bootloadera"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Koristiti Bootloader"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Bootloader instalacija"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Boot ure�aj"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne radi na starim BIOSima)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Zbijeno"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "zbijeno"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video mod"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Odgoda prije bootiranja uobi�ajenog imagea"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Lozinka"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Lozinka (provjera)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Ograni�ene opcije na komandnoj liniji"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ograni�i"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "O�isti /tmp na svakom podizanju"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precizna veli�ina RAMa (prona�eno %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Omogu�i vi�e obrazaca"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Upi�ite veli�inu RAM u Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Postavka ``Ograni�ene opcije na komandnoj liniji'' nema svrhe ako ne unesete "
-"lozinku"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Molim poku�ajte ponovo"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Lozinke se ne podudaraju"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Init poruka"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Pauza Otvorenog Firmware-a"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Vrijeme �ekanja podizanja kernela"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Omogu�i CD podizanje?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Omogu�i podizanje?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Uobi�ajeni OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Odlu�ili ste instalirati bootloader na particiju.\n"
-"To podrazumijeva da ve� imate bootloader na tvrdom disku sa kojeg podi�ete\n"
-"sustav (npr. System Commander).\n"
-"\n"
-"Sa kojeg diska �elite podizati?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ovo su trenutni zapisi.\n"
-"Mo�ete dodati jo� koji ili urediti postoje�i."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Gotov"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Promjeni"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Kakvu vrstu zapisa �elite dodati"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Drugi OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Drugi OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Drugi OS (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Slika (image)"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Dodaj na kraj"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "�itaj-pi�i"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tablica"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nesigurno"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Oznaka"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Uobi�ajeno"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-veli�ina"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NemaVidea"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Ukloni zapis"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Prazna oznaka nije dozvoljena"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Morate odrediti sliku kernela"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Morate odrediti root particiju"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ova oznaka ve� postoji"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Prona�ao sam %s %s me�usklopova"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Da li imate jo� koji?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Da li imate %s me�usklopova?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Poka�i info o hardveru"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaliram upravlja�ki program %s za karticu %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koji %s upravlja�ki program �elite isprobati?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"U nekim slu�ajevima, %s upravlja�ki program treba dodatne informacije da bi "
-"radio\n"
-"ispravno, iako normalno radi i bez toga. Da li �elite specifirati te "
-"dodatne\n"
-"opcije za njega ili �elite dozvoliti upravlja�kom programu da isproba va�e\n"
-"ra�unalo za informacije koje treba? Ponekad, isprobavanje mo�e zamrznuti\n"
-"va�e ra�unlo, ali ne bi trebalo izazvati nikakvu �tetu."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Auto. ispitaj"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Odredi postavke"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Sada mo�ete unijeti opcije za modul %s.\n"
-"Primjetite da svaka adresa treba biti une�ena sa prefiksom 0x kao '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sada mo�ete unijeti postavke za modul %s.\n"
-"Postavke su formata ``ime=vrijednost ime2=vrijednost2...''.\n"
-"Na primjer, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Postavke modula:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"U�itavanje modula %s nije uspjelo.\n"
-"Da li �elite poku�ati ponovo sa drugim parametrima?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "pristup X programima"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "pristup rpm alatima"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "dozvoli \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "pristup administracijskim datotekama"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(ve� postoji %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Lozinka je prejednostavna"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Molim dajte korisniku korisni�ko ime"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Korisni�ko ime mo�e sadr�avati samo mala slova, brojeve, `-' i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ovaj korisnik ve� postoji"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Dodaj korisnika"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Unesite korisnika\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Prihvati korisnika"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Puno ime"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Korisni�ko ime"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Ljuska"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Auto-prijava"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mogu podesiti da se va�e ra�unalo automatski prijavi kao jedan korisnik.\n"
-"Da li �elite koristiti tu pogodnost?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Izaberite uobi�ajenog korisnika:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Izaberite prozorski upravitelj koji �elite pokrenuti:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Molim izaberite jezik koji �elite koristiti."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Mo�ete izabrati druge jezike koji �e biti dostupni nakon instalacije"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Sve"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Dozvoli svim korisnicima"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Prilago�eno"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Nema dijeljenja"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paket %s treba instalirati. Da li ga �elite instalirati?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Mo�ete izvesti koriste�i NFS ili Sambu. Koji od njih �elite"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Nu�ni paket %s nedostaje"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Da li �elite dozvoliti korisnicima da izvezu neke direktorije u "
-"njihivompolaznom direktoriju?\n"
-"Dozvoljavanjem navedenoga �ete dozvoliti korisnicima da jednostavno kliknuna "
-"\"Dijeljenje\"\n"
-" u konqueroru i nautilusu.\n"
-"\n"
-"\"Proizvoljno\" �e omogu�iti dozvoljavanje po korisniku.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Odustani"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Pokreni userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Dijeljenje po korisniku koristi grupu \"fileshare\". \n"
-"Mo�ete koristiti userdrake za dodavanje korisnika u navedenu grupu."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Dobrodo�li Crackeri"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Slab"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardno"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Visok"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Vi�i"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidan"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ova razina se treba koristiti sa pa�njom. Ona �ini va� sustav mnogo lak�im "
-"za kori�tenje,\n"
-"ali vrlo osjetljiv: ne smije biti kori�ten za ra�unala koja su povezana u "
-"mre�i ili na Internet. Naime, nema lozinke za pristup."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Lozinke su sada uklju�ene me�utim jo� ne preporu�am kori�tenje ovog ra�unala "
-"u mre�nom okoli�u."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ovo je standardna sigurnosna razina preporu�ena za ra�unala koja �e biti "
-"kori�tena za spajanje na Internet kao klijent."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Ve� postoje neka ograni�enja i vi�e automatskih provjera se pokre�e svake "
-"no�i."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Sa ovom sigurnosnom razinom, kori�tenje ovog sustava kao poslu�itelj postaje "
-"mogu�e.\n"
-"Sigurnost je sada toliko visoka da se sustav mo�e koristiti kao poslu�itelj\n"
-"koji prima zahtjeve od mnogo klijenata. Upozorenje: ako je va�e ra�unalo "
-"samo klijent na Internetu, bolje da izaberete ni�u razinu."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Temeljeno na prija�njoj razini, ali je sustav potpuno zatvoren.\n"
-"Sigurnosne zna�ajke su na maksimumu."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Izaberite sigurnosni nivo"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Sigurnosna razina"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Koristi libsafe za poslu�itelje"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Biblioteka koja �titi od prekora�enja spremnika i format string napada."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Dobro dosli u %s izbornik operativnih sustava!\n"
-"\n"
-"Izaberite operativni sustav u popisu iznad ili\n"
-"pri�ekajte %d sekundi za uobi�ajeno podizanje.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobro dosli u GRUB izbornik operativnih sustava!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Za mijenjanje izabranog sustava pritisnite tipke %c i %c."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite ENTER za bootiranje izabranog OS, 'e' za promjenu"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "naredbe prije bootiranja ili 'c' za komandnu liniju."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Osvjetljeni zapis biti �e bootiran automatski za %d sekundi."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nema dovoljno mjesta u /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Radna povr�ina"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ne mo�ete instalirati bootloader na %s particiju\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "nema jo� implementirane pomo�i.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Postava Stila Podizanja"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Datoteka"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Novi stil kategoriziranja Monitora"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NoviStil Monitora"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicionalni Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicionalni Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Pokreni Auroru pri podizanju"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub mod"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot mod"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Trenutno koristite %s kao Upravitelj Boot-a.\n"
-"Pritisnite na Podesi za pokretanje �arobnjaka za postavljanje."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Podesi"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistemski mod"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Pokreni X-Window sustav pri podizanju"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne, ne �elim automatsko prijavljivanje"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, �elim automatsko prijavljivanje sa ovim korisnikom i okru�jem"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "U redu"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ne mogu otvoriti /etc/inittab za �itanje: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuta"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundi"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Ne mogu napraviti screenshotove prije particioniranja"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Screenshotovi �e biti raspolo�ivi poslije instalaciju u %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francuska"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Kosta Rika"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgija"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "�e�ka Republika"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Njema�ka"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Gr�ka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norve�ka"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "�vedska"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Nizozemska"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italija"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austrija"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Sjedinjene Ameri�ke Dr�ave"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Prvo napravite backup podataka"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Pro�itajte pa�ljivo!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ukoliko �elite koristiti aboot morate ostaviti dovoljno mjesta (npr. 2048 "
-"sektora) na\n"
-"po�etku diska"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Gre�ka"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "�arobnjak"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Izaberite akciju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Va� sustav sadr�i samo jednu veliku particiju.\n"
-"(Microsoft DOS/Windows obi�no koristi jednu particiju).\n"
-"Preporu�am da promijenite veli�inu particije\n"
-"(kliknite prvo na particiju te onda na \"Promijeni veli�inu\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Molim kliknite na particiju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalji"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Prazno"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Ostali"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Vrste datote�nih sustava:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Napravi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Vrsta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Umjesto toga koristi ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Obri�i"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Prvo pritisnite ``Demontiraj''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon mijenjanja tipa particije %s svi podaci na ovoj particiji biti �e "
-"obrisani"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Izaberite particiju"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Izaberite drugu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Izlaz"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Normalno > Ekspert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Prebaci u normalni mod"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Vrati"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Da ipak nastavim?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Da zavr�im bez spremanja"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Da zavr�im bez zapisivanje particijske tablice?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Da li �elite spremiti /etc/fstab promjene?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Raspodijeli automatski"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "O�isti sve"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Hard disk informacije"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Sve primarne particije su iskori�tene"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ne mogu dodati niti jednu dodatnu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ako �elite dodati jo� koju particiju molim obri�ite jednu od particija kako "
-"bi\n"
-"mogli stvoriti jednu extended particiju."
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Spremi particijsku tabelu"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Vrati particijsku tabelu"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Spasi particijsku tabelu"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ponovno u�itaj particijsku tabelu"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automatsko montiranje prenosivog medija"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Odaberite datoteku"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Backup particijske tablice nema istu veli�inu\n"
-"Da ipak nastavim?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Upozorenje"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Umetnite disketu u pogon\n"
-"Svi podaci na disketi biti �e izbrisani"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Poku�avam spasiti particijsku tablicu"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detaljne informacije"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "To�ka montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcije"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Promijeni veli�inu"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Premjesti"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatiraj"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montiraj"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Dodaj RAID-u"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Dodaj LVM-u"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Demontiraj"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Ukloni sa RAID-a"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Ukloni sa LVM-a"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Promijeni RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Koristi za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Stvori novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Po�etni sektor:"
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Veli�ina u MB:"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Vrsta datote�nog sustava:"
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Mjesto montiranja:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Postavke:"
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Ukloniti loopback datoteku?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Mijenjam tip particije"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Koji datote�ni sustav �elite?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Mijenjam iz ext2 u ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Gdje �elite montirati loopback datoteku %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gdje �elite montirati ure�aj %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne mogu maknuti to�ku za montiranje zato �to se ova particija koristi za "
-"loop back.\n"
-"Uklonite loopback prvo"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Izra�unavam granice fat datote�nog sustava"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Mijenjam veli�inu"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ova particija nije promjenjiva u veli�ini"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Preporu�am da prvo backupirate sve podatke s ove particije"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon mijenjanja veli�ine particije %s svi podaci na ovoj particiji biti �e "
-"izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Odaberite novu veli�inu"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nova veli�ina u MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na koji disk se �elite premjestiti?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na koji se sektor �elite premjestiti?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Premje�tam"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Premje�tam particiju..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Izaberite postoje�i RAID na koji �elite dodati "
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novi"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Izaberite postoje�i LVM na koji �elite dodati "
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM ime?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ova particija se ne mo�e koristiti za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Ime loopback datoteke:"
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Dajte ime datoteke"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Datoteku koristi neki drugi loopback. Molim izaberite neku drugu datoteku"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Datoteka ve� postoji. Da li da nju upotrijebim?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opcije montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Razno"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "ure�aj"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "razina"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "chunk veli�ina"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Budite oprezni: ova operacija je opasna"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Kakav tip particioniranja?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"�alim me�utim ne mogu napraviti /boot toliko daleko na disku\n"
-"(cilindar > 1024).\n"
-"Imate dvije opcije ili �ete koristiti LILO pa ne�e raditi ili ne�ete\n"
-"koristiti LILO pa vam /boot ne�e ni trebati."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Particiju koju ste odabrali kao root (/) je fizi�ki locirana poslije 1024-"
-"tog cilindra va�eg hard diska, a nemate /boot particiju.\n"
-"Ukoliko planirate koristiti LILO boot menad�er, budite pa�ljivi da dodate/"
-"boot particiju"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Izabrali ste softwaresku RAID particiju kao root (/).\n"
-"Nema bootloader-a koji je u mogu�nosti to podr�ati bez /boot particije.\n"
-"Zato budite pa�ljivi da dodate /boot particiju"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Particijska tablica pogona %s �e sada biti zapisana na disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Trebate ponovo pokrenuti sustav prije nego promjene postanu aktivne"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon formatiranja particije %s svi podaci na ovoj particiji biti �e obrisani"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatiram"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiram loopback datoteku %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiram particiju %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Sakrij datoteku"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Premijesti datoteku na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Direktorij %s ve� sadr�i neke podatke\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Premije�team datoteke na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiram %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Uklanjam %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "particija %s je sada poznata kao %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Ure�aj:"
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS ure�aj slovo: %s (naga�anje)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Vrsta: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ime: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Po�etak: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Veli�ina: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektora"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindar %d do %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatiran\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nije formatiran\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montiran\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback datoteka(e):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Podrazumijevana boot particija\n"
-"  (za MS-DOS boot, ne za LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Razina %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Chunk veli�ina %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Ime loopback datoteke: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"�anse su, da je ova particija\n"
-"ustvari particija upravlja�kog programa, vjerojatno\n"
-"biste ju trebali ostaviti.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ova specijalna bootstrap\n"
-"particija je za\n"
-"dvostruko-podizanje (dual-boot) va�eg sustava.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Veli�ina: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Vrsta particijske tabele: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na sabirnici %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcije: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Klju� enkriptiranja datote�nog sustava"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Izaberite va� klju� za enkriptiranje datote�nog sustava"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Upisani enkripcijski klju� je prejednostavan (mora biti dug najmanje %d "
-"znakova)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Enkripcijski klju�evi se ne sla�u"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Enkripcijski klju�"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Enkripcijski klju� (ponovno)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Promijeni tip"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Molim kliknite na medij"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Poslu�itelji za pretra�ivanje"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatiranje %s nije uspjelo"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ne znam kako formatirati %s kao vrstu %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montiranje particije %s u direktorij %s neuspje�no"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck neuspje�an sa izlaznim kodom %d ili signalom %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "gre�ka kod demontiranja %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednostavno"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "sa /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "poslu�itelj"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS se ne mo�e koristiti na particijama koje su manje od 16 MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS se ne mo�e koristiti na particijama koje su manje od 32 MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Mjesto montiranja mora po�eti sa /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ve� postoji particija sa mjestom montiranja %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ne mo�ete koristiti LVM logi�ki prostor za mjesto montiranja %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ovaj direktorij bi trebao ostati unutar root datote�nog sustava"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Treba vam istinski datote�ni sustav (ex2, reiserfs) za ovo mjesto "
-"montiranja\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Ne mo�ete koristiti enkriptirani datote�ni sustav za to�ku montiranja %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nema dovoljno slobodnog prostora za auto-alokaciju"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nema ni�ta za uraditi"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Gre�ka prilikom otvaranja %s za pisanje: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Pojavila se gre�ka - ne mogu prona�i niti jedan valjani ure�aj na kojem\n"
-"bih mogao instalirati datote�ni sustav. Provjerite da li je sa va�im "
-"hardverom sve u redu."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nemate niti jednu particiju!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux je vi�ekorisni�ki sustav, i to zna�i da svaki korisnik mo�e imati\n"
-"vlastita pode�enja, vlastite datoteke itd. Mo�ete pro�itati ``User Guide''\n"
-"da nau�ite vi�e. Za razliku od \"root\"-a, koji je administrator, korisnici\n"
-"koje �ete dodati ovdje ne�e imati ovla�tenja za mijenjanje ni�ega osim "
-"vlastitih\n"
-"datoteka ili vlastitih postavki. Morati �ete napraviti najmanje jednog "
-"normalnog\n"
-"korisnika za vas. Taj ra�un �ete koristiti za prijavljivanje za rutinsko\n"
-"kori�tenje. Iako je vrlo prakti�no se prijaviti kao \"root\" svaki dan,\n"
-"to mo�e biti vrlo opasno! Najmanja pogre�ka mo�e zna�iti da va� sustav\n"
-"ne�e vi�e mo�i raditi. Ako napravite ozbiljnu gre�ku kao normalan korisnik,\n"
-"mo�ete izgubiti samo neke informacije, ali ne cijeli sustav.\n"
-"\n"
-"Prvo, morate unijeti va�e pravo ime. Ono nije obvezno, naravno\n"
-"mo�ete ustvari unijeti �to god �elite. DrakX �e tada uzeti prvu rije� koju\n"
-"ste unijeli u to polje i prenijeti je u \"Korisni�ko ime\". To je ime kojim "
-"�e \n"
-"se taj konkretni korisnik prijavljivati u sustav. Mo�ete ga mijenjati. "
-"Tada \n"
-"morate ovdje upisati lozinku. Sa gledi�ta sigurnosti, lozinka "
-"neprivilegiranog \n"
-"(obi�nog) korisnika nije toliko va�na kao \"root\" lozinka, ali je ne treba "
-"zbog\n"
-"toga zanemarivati: naposlijetku, radi se o va�im datotekama.\n"
-"\n"
-"Ako pritisnete \"Prihvati korisnika\", mo�ete ih dodati koliko �elite. "
-"Dodajte\n"
-"korisnika za svakog prijatelja: oca ili sestru, npr. Kada ste dodali sve "
-"korisnike\n"
-"koje ste �eljeli, stisnite \"Zavr�i\".\n"
-"\n"
-"Pritiskanjem na \"Napredno\" mo�ete promijeniti predodre�enu \"ljusku\" za "
-"tog\n"
-"korisnika (bash je predodre�en)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Gore su popisane postoje�e Linux particije prona�ene na\n"
-"va�em hard disku. Mo�ete zadr�ati izbore napravljene od strane �arobnjaka, "
-"one su dobre za\n"
-"uobi�ajenu upotrebu. Ukoliko promjenite izbore, morate barem definirati "
-"root\n"
-"particiju (\"/\"). Nemojte izabrati premalu particiju jer ne�ete mo�i \n"
-"instalirati dovoljno software-a. Ako �elite spremati va�e podatke na "
-"posebnoj particiji,\n"
-"trebate tako�er izabrati \"/home\" (jedino mogu�e ako imate vi�e od jedne\n"
-"raspolo�ive Linux particije).\n"
-"\n"
-"\n"
-"Za informaciju, svaka particija je popisana kako slijedi: \"Ime\", "
-"\"Kapacitet\".\n"
-"\n"
-"\n"
-"\"Ime\" je kodirano kako slijedi: \"tip hard diska\", \"broj hard diska\",\n"
-"\"broj particije\" (naprimjer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk - IDE hard disk i \"sd\"\n"
-"ukoliko je on SCSI hard disk.\n"
-"\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo poslije \"hd\" ili \"sd\". Sa IDE hard "
-"diskovima:\n"
-"\n"
-" * \"a\" zna�i \"master hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"b\" zna�i \"slave hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"c\" zna�i \"master hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-" * \"d\" zna�i \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"\n"
-"Sa SCSI hard diskovima, \"a\" zna�i \"primarni hard disk\", \"b\" zna�i "
-"\"sekundarni hard disk\", itd..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux instalacija je pro�irena na nekoliko CDROMova. DrakX\n"
-"zna ukoliko se odabrani paket nalazi na drugom CDROMu i izbaciti �e\n"
-"trenutni CD i pitati vas da ubacite drugi koji je potreban."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Sada treba odrediti koje programe �elite instalirati u svoj sustav. Za "
-"Mandrake \n"
-"Linux su dostupne tisu�e paketa, i ne morate ih sve znati na pamet.\n"
-"\n"
-"Ako pokre�ete standarnu instalaciju sa CD-ROMa, prvo �ete biti upitani da "
-"navedete\n"
-"CDove koje imate (samo u modu za stru�njake). Provjerite imena CDova i "
-"ozna�ite\n"
-"ku�ice koje odgovaraju CDovima koje imate. Pritisnite \"U redu\" kada ste "
-"spremni\n"
-"nastaviti.\n"
-"\n"
-"Paketi su podijeljeni po grupama koje odgovaraju odre�enoj svrsi. Grupe su \n"
-"podijeljene u �etiri sekcije:\n"
-"\n"
-" * \"Radna stanica\": ako �ete koristiti stroj kao radnu stanicu, izaberite\n"
-"jednu ili vi�e odgovaraju�ih grupa;\n"
-"\n"
-" * \"Razvoj\": ako �e se Va� stroj koristiti za programiranje, izaberite\n"
-"�eljene grupe;\n"
-"\n"
-" * \"Poslu�itelj\": ako je Va� stroj odre�en za poslu�itelja, mo�i �ete "
-"odabrati\n"
-"koje od uobi�ajenih servisa �elite instalirati na njega;\n"
-"\n"
-" * \"Grafi�ko okru�je\": naposlijetku, ovdje birate grafi�ko okru�je. Barem "
-"jedno\n"
-"mora biti odabrano ako �elite imati grafi�ku radnu stanicu!\n"
-"\n"
-"Pomicanjem pokaziva�a mi�a na ime grupe �e se prikazati kratak opis te "
-"grupe. Ako\n"
-"nijedna grupa nije odabrana pri normalnoj instalaciji (za razliku od "
-"nadogradnje),\n"
-"isko�it �e dijalog sa predlo�enim opcijama za minimalnu instalaciju:\n"
-"\n"
-" * \"Sa Xima\": instaliranje �to je manje paketa mogu�e za grafi�ko "
-"su�elje;\n"
-"\n"
-" * \"Sa osnovnom dokumentacijom\": instalira osnovni sustav sa osnovnim "
-"pomo�nim\n"
-"programima i njihovom dokumentacijom. Ova instalacija je pogodna za "
-"namje�tanje\n"
-"poslu�itelja;\n"
-"\n"
-" * \"Stvarno malena instalacija\": instalirat �e strogi minimum potreban da "
-"bi\n"
-"imali Linux sustav koji radi, samo u komandnoj liniji. Ova instalacija je "
-"velika\n"
-"oko 65Mb.\n"
-"\n"
-"Mo�ete provjeriti \"Inividualni odabir paketa\", �to je korisno ako ste "
-"upoznati\n"
-"sa ponu�enim paketima ili ako �elite imati potpunu kontrolu nad "
-"instaliranim\n"
-"sadr�ajem.\n"
-"\n"
-"Ako ste pokrenuli instalaciju u \"Nadogradnja\" na�inu, mo�ete odselektirati "
-"sve\n"
-"grupe da izbjegnete instaliranje novih paketa. Ovo je korisno za "
-"popravljanje\n"
-"ili osuvremenjivanje postoje�eg sustava."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Kona�no, ovisno o tome da li ste izbrali individualne pakete, prikazat �e "
-"vam \n"
-"se stablo sa svim paketima podijeljenim u grupe i podgrupe. Pri "
-"pregledavanju\n"
-"stabla mo�ete izabrati �itave grupe, podgrupe ili pojedine pakete.\n"
-"\n"
-"Kad god izaberet paket na stablu, na desnoj strani se pojavi opisnik. Kada "
-"ste\n"
-"zavr�ili odabir, pritisnite \"Instaliraj\", �ime �ete pokrenuti proces "
-"instaliranja.\n"
-"Ovisno o brzini ra�unala i broju paketa koji trebaju biti instalirani, "
-"proces mo�e\n"
-"potrajati. Procjena vremena koje �e biti potrebno da bi se sve instaliralo "
-"pi�e\n"
-"na ekranu, da vam pomogne procjeniti imate li vremena za �alicu kave.\n"
-"\n"
-"!! Ako je odabran poslu�iteljski paket, namjerno ili jer je pripadao nekoj "
-"grupi,\n"
-"bit �ete upitani da potvrdite da li �elite stvarno instalirati te "
-"poslu�itelje.\n"
-"Kod Mandrake Linuxa, svi instalirani poslu�itelji se pokre�u prilikom "
-"podizanja\n"
-"sustava. �ak iako su sigurni, bez poznatih problema u vrijeme izlaska "
-"distribucije,\n"
-"mo�e se dogoditi da se otkriju sigurnosne rupe nakon zgotovljenja ove "
-"ina�ice\n"
-"Mandrake Linuxa. Ako ne znate �to bi pojedini servis trebao raditi ili "
-"za�to \n"
-"se instalira, pritisnite \"Ne\". Pritiskanjem na \"Da\"instalirat �e se "
-"navedeni\n"
-"servisi i pokretat �e se automatski. !!\n"
-"\n"
-"\"Automatske ovisnosti\" opcija onemogu�uje upozorenje koje se pojavi kad "
-"god \n"
-"instalacija automatski izabere paket. Ovo se de�ava stoga �to je utvrdila "
-"da\n"
-"treba zadovoljiti ovisnost drugim paketom da bi se uspje�no zavr�ila.\n"
-"\n"
-"Malena ikona diskete na dnu popisa omogu�uje u�itavanje popisa paketa "
-"izabranih\n"
-"tijekom neke pro�le instalacije. Pritiskom na nj upitat �e vas da ubacite "
-"disketu\n"
-"napravljenu na kraju neke druge instalacije. Pogledajte drugi savjet u "
-"posljednjem\n"
-"koraku stvaranja takve diskete."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Predlo�eno Vam je da namjestite Internet/mre�nu vezu. Ako �elite ra�unalo\n"
-"povezati s Internetom ili lokalnom mre�om, pristisnite \"U redu\". Pokrenut "
-"�e\n"
-"se proces automatskog prepoznavanja mre�nih kartica i modema. Ako ovaj "
-"proces\n"
-"zaka�e, isklju�ite \"Koristi autodetekciju\" ku�icu slijede�i put. Mo�ete\n"
-"odabrati i da ne namje�tate mre�u, ili da to u�inite kasnije; u tom "
-"slu�aju, \n"
-"samo stisnite \"Odustani\".\n"
-"\n"
-"Dostupne veze su: obi�ni modem, ISDN modem, ADSL veza, kablovski modem, te\n"
-"jednostavna LAN veza (Ethernet).\n"
-"\n"
-"Ovdje se ne�emo detaljno baviti sa pojedinim konfiguracijama. Samo "
-"provjerite da\n"
-"li imate sve parametre od va�eg pru�atelja internet usluga ili sustavskog \n"
-"administratora.\n"
-"\n"
-"Mo�ete pogledati u ``User Guide'', poglavlje o Internet vezama za detalje "
-"o \n"
-"postavkama, ili jednostavno sa�ekati da se sustav instalira, pa koristiti\n"
-"tamo opisani program da bi namjestili va�u vezu.\n"
-"\n"
-"Ako �elite namjestiti mre�u kasnije, poslije instalacije, ili ste zavr�ili\n"
-"namje�tanje mre�e, stisnite \"Odustani\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Sada mo�ete izabrati servise koje �elite pokreniti pri podizanju.\n"
-"\n"
-"Ovdje su predstavljeni svi servisi dostupni sa trenutnom instalacijom.\n"
-"Pregledajet ih pa�ljivo i maknite one koje nisu uvijek potrebni prilikom\n"
-"podizanja sustava.\n"
-"\n"
-"Odabiranjem odre�enog servisa dobit �ete kratki opis tog servisa. Me�utim, "
-"ako\n"
-"niste sigurni je li servis koristan ili ne, sigurnije je ostaviti "
-"predodre�eno\n"
-"pona�anje.\n"
-"\n"
-"!! Na ovoj razini obratite pozornost na to da li �ete koristiti stroj kao\n"
-"poslu�itelj: vjerojatno ne �elite pokretati neke servise koje ne trebate.\n"
-"Prisjetite se da neki servisi mogu biti opasni ako su pokrenuti na "
-"poslu�itelju.\n"
-"Op�enito, izaberite samo one servise koji vam stvarno trebaju.\n"
-"!!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux upravlja vremenom po GMTu (Greenwich Mean Time) i prevodi ga u\n"
-"lokalno vrijeme prema vremenskoj zoni koju ste izabrali. Mogu�e je, dodu�e,\n"
-"ovo isklju�iti isklju�ivanjem odabira \"Hardverski sat namje�ten na GMT\" "
-"tako\n"
-"da je hardverski sat jednak sustavskom. Ovo je korisno kada se na ra�unalu\n"
-"nalazi drugi operacijski sustav, poput Windows.\n"
-"\n"
-"Opcija \"Automatska sinhronizacija vremena\" �e automatski pode�avati sat\n"
-"tako da �e se povezivati sa vremenskim poslu�iteljem na Internetu. Sa "
-"popisa\n"
-"izaberite poslu�itelj najbli�e vama. Naravno, morate imati ispravnu vezu sa\n"
-"Internetom da bi ovo radilo. Tako�er, instalirat �e vremenski poslu�itelj "
-"na\n"
-"va�e ra�unalo kojeg, opcionalno, mogu koristiti druga ra�unala u va�oj\n"
-"lokalnoj mre�i."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (od X Window System) jest srce GNU/Linux grafi�kog su�elja, na kojem "
-"po�ivaju\n"
-"sva grafi�ka okru�ja (KDE, GNOME, AfterStep, WindowMaker, itd.) koja dolaze "
-"sa\n"
-"Mandrake Linuxom. Ovdje �e DrakX poku�ati automatski podesiti Xe.\n"
-"Jako je rijetko da �e zakazati, osim ako hardver nije vrlo star (ili nov)\n"
-"Ako uspije, pokrenut �e Xe automatski sa najboljom mogu�om rezolucijom, "
-"ovisno\n"
-"o veli�ini monitora. Pojavit �e se prozor s upitom da li ga vidite.\n"
-"\n"
-"Ako ste pokrenuli \"Stru�njak\" instalaciju, u�i �ete u �arobnjak za "
-"namje�tanje\n"
-"Xa. Pogledajte odgovaraju�i odjeljak u priru�niku za vi�e informacija o "
-"ovom\n"
-"�arobnjaku.\n"
-"\n"
-"Ako vidite poruku tijekom testa, i odgovorite \"Da\", onda �e DrakX krenuti\n"
-"na slijede�i korak. Ako ne mo�ete vidjeti poruku, to jednostavno zna�i da "
-"je\n"
-"konfiguracija pogre�na i test �e se automatski zavr�iti nakon 10 sekundi, "
-"te\n"
-"povratiti ekran."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Kona�no �ete biti pitani da li �elite vidjeti grafi�ko su�elje pri\n"
-"dizanju. Primjetite da ovo pitanje �e biti pitano iako ne �elite "
-"istestirati\n"
-"konfiguraciju. Vjerojatno, �elite odgovoriti sa \"Ne\" ukoliko �e va�e "
-"ra�unalo\n"
-"raditi kao poslu�itelj, ili ako niste bili uspje�ni u konfiguriranju va�eg\n"
-"zaslona."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"U ovom trenutku, trebate izabrati gdje �ete instalirati va�\n"
-"Mandrake Linux operativni sustav na va� hard disk. Ukoliko je prazan ili "
-"ako\n"
-"postoje�i operativni sustav koristi �itav prostor na disku, trebate ga\n"
-"particionirati. Jednostavno, particioniranje hard diska sastoji se od "
-"logi�kog\n"
-"dijeljenja kako bi napravili prostor za instalaciju va�eg novog Mandrake "
-"Linux sustava.\n"
-"\n"
-"\n"
-"Zato �to su posljedice procesa particioniranja obi�no ireverzibilne,\n"
-"particioniranje mo�e biti stra�no i stresno ukoliko ste korisnik bez "
-"iskustva.\n"
-"Ovaj �arobnjak pojednostavljuje proces. Prije po�etka, molimo konzultirajte "
-"upute\n"
-"i uzmite vremena koliko vam je potrebno.\n"
-"\n"
-"\n"
-"Trebate najmanje dvije particije. Jedna je za sam operativni sustav, a\n"
-"druga je za virtualnu memoriju (tako�er zvanu Swap).\n"
-"\n"
-"\n"
-"Ukoliko su particije ve� definirane (iz prija�nje instalacije iliiz\n"
-"drugih particijskih alata), trebate samo izbarati te particije za "
-"instalaciju va�eg\n"
-"Linux sustava.\n"
-"\n"
-"\n"
-"Ukoliko particije nisu ve� definirane, trebate ih napraviti. \n"
-"Da biste to napravili, koristite �arobnjak gore raspolo�iv. U zavisnosti od "
-"va�ih hard disk\n"
-"postavki, nekoliko rje�enja je raspolo�ivo:\n"
-"\n"
-"* Kori�tenje postoje�e particije: �arobnjak je detektirao jednu ili vi�e "
-"postoje�ih Linux particija na va�em hard disku. Ukoliko\n"
-"  ih �elite zadr�ati, izaberite ovu opciju.\n"
-"\n"
-"\n"
-"* Obri�i cijeli disk: ukoliko �elite obrisati sve podatke i sve particije "
-"koje postoje na va�em hard disku i zamjeniti ih sa\n"
-"  va�im novim Mandrake Linux sustavom, mo�ete izabrati ovu opciju. Budite "
-"pa�ljivi sa ovim rje�enjem, ne�ete mo�i\n"
-"  povratiti va� izbor nakon potvrde.\n"
-"\n"
-"\n"
-"* Koristiti slobodan prostor na Windows particiji: ukoliko je Microsoft "
-"Windows instaliran na va�em hard disku i zauzima\n"
-"  cjeli raspolo�iv prostor na njemu, trebate napraviti slobodan prostor za "
-"Linux podatke. Da biste to napravili mo�ete obrisati va�u\n"
-"  Microsoft Windows particiju i podatke (pogledajte \"Brisanje cijelog diska"
-"\" ili \"Ekspert mod\" rje�enja) ili mjenjati veli�inu va�e\n"
-"  Microsoft Windows particije. Mjenjanje veli�ine mo�e se obaviti bez "
-"gubitka bilo kakvih podataka. Ovo rje�enje je\n"
-"  preporu�eno ukoliko �elite koristiti zajedno Mandrake Linux i Microsoft "
-"Windows-e na istom ra�unalu.\n"
-"\n"
-"\n"
-"  Prije izabiranja ovog rje�enja, molimo razumite da �e veli�ina va�e "
-"Microsoft\n"
-"  Windows partiticije biti manja nego �to je sada. To zna�i da �ete imati "
-"manje slobodnog prostora pod\n"
-"  Microsoft Windows-ima za spremanje va�ih podataka ili instaliranje novog "
-"software-a.\n"
-"\n"
-"\n"
-"* Ekspertni mod: Ukoliko �elite particionirati ru�no va� hard disk, mo�ete "
-"izabrati ovu opciju. Budite pa�ljivi prije\n"
-"  izabiranja ovog rje�enja. Vrlo je mo�no, ali i vrlo opasno. Mo�ete "
-"izgubiti sve va�e podatke vrlo lako. Zato,\n"
-"  nemojte izabrati ovo rje�enje ukoliko ne znate �to radite."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Svaka particija koja je novo definirana mora biti\n"
-"formatirana za kori�tenje (formatiranje zna�i pravljenje datote�nog "
-"sustava).\n"
-"\n"
-"\n"
-"Trenutno, mo�ete htjeti ponovno formatirati neke ve� postoje�e particije "
-"kako bi obrisali\n"
-"podatke koje one posjeduju. Ukoliko �elite to napraviti, molimo tako�er "
-"izaberite particije\n"
-"koje �elite formatirati.\n"
-"\n"
-"\n"
-"Molimo primjetite da nije nu�no ponovno formatirati sve ve� postoje�e "
-"particije.\n"
-"Morate ponovno formatirati particije koje sadr�e operativni sustav (poput \"/"
-"\",\n"
-"\"/usr\" ili \"/var\") ali ne morate ponovno formatirati particije koje "
-"sadr�e podatke\n"
-"koje �elite zadr�ati (tipi�no /home).\n"
-"\n"
-"\n"
-"Molimo budite pa�ljivi odabirom particija, poslije formatiranja, svi podaci "
-"�e biti\n"
-"obrisani i ne�ete ih mo�i povratiti.\n"
-"\n"
-"\n"
-"Pritisnite na \"U redu\" kada ste spremni za formatiranje particije.\n"
-"\n"
-"\n"
-"Pritisnite na \"Odustani\" kada �elite izabrati druge particije za "
-"instalaciju va�eg novog\n"
-"Mandrake Linux operativnog sustava."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Va� novi Mandrake Linux operativni sustav se trenutno instalira.\n"
-"U Zavisnosti od broja paketa koliko instalirate i brzine va�eg ra�unala,\n"
-"ova operacija mo�e potrajati od nekoliko minuta do zna�ajne koli�ine\n"
-"vremena.\n"
-"\n"
-"\n"
-"Molimo budite strpljivi."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Prije nastavka trebate pa�ljivo pro�itati stavke licence. Ona\n"
-"pokriva cijelu Mandrake Linux distribuciju, i ako se ne sla�ete u svim\n"
-"stavkama sadr�anih u njoj, kliknite na \"Odbij\" gumb koji �e automatski\n"
-"zavr�iti instalaciju. Za nastavak instalacije, kliknite na\n"
-"\"Prihvati\" gumb."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"U ovoj to�ki instalacije, trebate izabrati koje\n"
-"partiticije �ete koristiti za instalaciju va�eg novog Mandrake Linux "
-"sustava. Ukoliko su\n"
-"particije ve� definirane (iz prethodne instalacije GNU/Linux-a ili iz\n"
-"drugih particijskih alata), mo�ete koristiti postoje�e particije. U drugim "
-"slu�ajevima,\n"
-"hard disk particije moraju biti definirane.\n"
-"\n"
-"\n"
-"Za pravljenje particija, morate prvo izabrati hard disk. Mo�ete izabrati \n"
-"disk za particioniranje klikanjem na \"hda\" za prvi IDE disk, \"hdb\" za\n"
-"drugi ili \"sda\" za prvi SCSI disk i tako dalje.\n"
-"\n"
-"\n"
-"Za particioniranje izabranog hard diska, mo�ete izabrati ove opcije:\n"
-"\n"
-"   * Obri�i sve: ova opcija �e obrisati sve raspolo�ive particije na "
-"odabranom hard disku.\n"
-"\n"
-"\n"
-"   * Auto alokacija: ova opcija vam dozvoljava da automatski napravite Ext2 "
-"i swap particije u slobodnom prostoru va�eg\n"
-"     hard diska.\n"
-"\n"
-"\n"
-"   * Spasi particijsku tablicu: ukoliko je va�a particijska tablica "
-"o�te�ena, mo�ete probati spasiti ju koriste�i ovu opciju. Molimo\n"
-"     budite pa�ljivi i zapamtite da ne mora biti uspje�na.\n"
-"\n"
-"\n"
-"   * Povrati: mo�ete koristiti ovu opciju za odustajanje od va�ih promjena.\n"
-"\n"
-"\n"
-"   * Ponovno u�itaj: mo�ete koristiti ovu opciju ukoliko �elite vratiti "
-"unazad sve promjene i u�itati va�u inicijalnu particijsku tablicu\n"
-"\n"
-"\n"
-"   * �arobnjak: ukoliko �elite koristiti �arobnjak za particioniranje va�eg "
-"hard diska, mo�ete koristiti ovu opciju. Preporu�eno je ukoliko \n"
-"     nemate dovoljno znanja oko particioniranja.\n"
-"\n"
-"\n"
-"   * Vrati sa diskete: ukoliko ste spremili va�u particijsku tablicu na "
-"disketu tijekom prija�nje instalacije, mo�ete\n"
-"     ju vratiti koriste�i ovu opciju.\n"
-"\n"
-"\n"
-"   * Spremi na disketu: ukoliko �elite spremiti va�u particijsku tablicu na "
-"disketu kako biste ju mogli kasnije vratiti, mo�ete koristiti ovu\n"
-"     opciju. Jako je preporu�ljivo koristiti ovu opciju\n"
-"\n"
-"\n"
-"   * Zavr�i: kada ste zavr�ili s particioniranjem va�eg hard diska, "
-"koristite ovu opciju za spremanje va�ih promjena.\n"
-"\n"
-"\n"
-"Za informaciju, mo�ete dohvatiti bilo koju opciju koriste�i tastaturu: "
-"navigiranje kroz particije se obavlja koriste�i Tab i Up/Down strelice.\n"
-"\n"
-"\n"
-"Kada je particija odabrana, mo�ete koristiti:\n"
-"\n"
-"           * Ctrl-c za pravljenje novih particija (kada je prazna particija "
-"izabrana)\n"
-"\n"
-"           * Ctrl-d za brisanje particije\n"
-"\n"
-"           * Ctrl-m za postavljanje to�ke montiranja\n"
-"           \n"
-"\n"
-"           \n"
-"Ukoliko instalirate na PPC ra�unalo, �eliti �e te napraviti malu HFS "
-"'bootstrap' particiju od najmanje 1MB za kori�tenje\n"
-"od strane yaboot bootloader-a. Ukoliko se odlu�ite za pravljenje malo ve�e "
-"particije, recimo 50MB, mo�ete ju prona�i korisnom za stavljanje\n"
-"dodatnog kernela i ramdisk slike u slu�aju nu�de."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Vi�e od jedne Microsoft Windows particije su prona�ene\n"
-"na va�em hard disku. Molimo izaberite jednu kojoj �elite promjeniti veli�inu "
-"kako bi instalirali\n"
-"va� novi Mandrake Linux operativni sustav.\n"
-"\n"
-"\n"
-"Za informaciju, svaka particija je popisana kako slijedi; \"Linux ime\", "
-"\"Windows\n"
-"ime\" \"Kapacitet\".\n"
-"\n"
-"\"Linux ime\" je kodirano kako slijedi: \"tip hard diska\", \"broj hard diska"
-"\",\n"
-"\"broj particije\" (naprimjer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk - IDE hard disk i \"sd\"\n"
-"ukoliko je on SCSI hard disk.\n"
-"\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo poslije \"hd\" ili \"sd\". Sa IDE hard "
-"diskovima:\n"
-"\n"
-"   * \"a\" zna�i \"master hard disk na primarnom IDE kontroleru\",\n"
-"\n"
-"   * \"b\" zna�i \"slave hard disk na primarnom IDE kontroleru\",\n"
-"\n"
-"   * \"c\" zna�i \"master hard disk na sekundarnom IDE kontroleru\",\n"
-"\n"
-"   * \"d\" zna�i \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"\n"
-"Sa SCSI hard diskovima, \"a\" zna�i \"primarni hard disk\", \"b\" zna�i "
-"\"sekundarni hard disk\", itd...\n"
-"\n"
-"\"Windows ime\" je slovo va�eg hard diska pod Windows-ima (prvi disk\n"
-"ili particija se zove \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Molimo budite strpljivi. Ova operacija mo�e potrajati nekoliko minuta."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Molimo izaberite \"Instalacija\" ukoliko nemate prethodne verzijeMandrake "
-"Linux-a\n"
-"instalirano ili ako �elite koristiti nekoliko operativnih sustava.\n"
-"\n"
-"\n"
-"Molimo izaberite \"Dogradnja\" ukoliko �elite dograditi ve� postoje�u "
-"verzijuMandrake Linux-a.\n"
-"\n"
-"\n"
-"U zavisnosti od znanja u GNU/Linux, mo�ete izabrati jednu od slijede�ih "
-"razina za instalaciju ili dogradnju\n"
-"va�eg Mandrake Linux operativnog sustava:\n"
-"\n"
-"* Preporu�eno: ukoliko nikad niste instalirali GNU/Linux operativni sustav "
-"izaberite ovo. Instalacija �e biti\n"
-"  vrlo laka i pitati �e vas samo nekoliko pitanja.\n"
-"\n"
-"\n"
-"* Prilago�eno: ukoliko ste ve� upoznati sa GNU/Linux, mo�ete izabrati "
-"primarnu upotrebu (radna stanica, poslu�itelj,\n"
-"  razvoj) za va� sustav. Trebati �ete odgovoriti na vi�e pitanja nego u "
-"\"Preporu�enoj\" instalacijskoj\n"
-"  klasi, zato trebate znati vi�e o tome kako GNU/Linux radi kako bi izabrali "
-"ovu instalacijsku klasu.\n"
-"\n"
-"\n"
-"* Stru�njak: ukoliko imate dobro znanje o GNU/Linux-u, mo�ete izabrati ovu "
-"instalacijsku klasu. Kao u \"Prilago�enoj\"\n"
-"  instalacijskoj klasi, mo�i �ete izabrati primarnu upotrebu za va� sustav "
-"(radna stanica, poslu�itelj, razvoj). Budite jako\n"
-"  pa�ljivi prije nego �to odaberete ovu instalacijsku klasu. Mo�i �ete "
-"izvr�iti visoko prilago�enu instalaciju.\n"
-"  Odgovori na neka pitanja mogu biti jako te�ki ukoliko nemate dobro znanje "
-"GNU/Linux. Dakle, nemojte izabrati\n"
-"  ovu instalacijsku klasu ukoliko ne znate �to radite."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Molim odaberite ispravni port. Na primjer, COM1 port pod MS Windowsima\n"
-"je imenovan ttyS0 pod GNU/Linuxom."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) i Grub su bootloaderi: oni su u mogu�nosti podi�i\n"
-"ili GNU/Linux ili bilo koji drugi postoje�i operativni sustav na va�em "
-"ra�unalu.\n"
-"Normalno, ti drugi operativni sustavi su ispravno prona�eni i\n"
-"instalirani. Ako to nije slu�aj, mo�ete ga dodati ru�no na ovom\n"
-"zaslonu. Budite pa�ljivi da izaberete ispravne parametre.\n"
-"\n"
-"\n"
-"Tako�er �ete po�eliti ne dati pristup tim drugim operativnim sustavima\n"
-"drugima, u tom slu�aju mo�ete obrisati odgovaraju�e unose. Ali\n"
-"u tom slu�aju, trebati �ete boot disketu kako bi ih mogli podi�i!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Sada morate odabrati gdje �elite staviti zahtijevane informacije za "
-"podizanje\n"
-"GNU/Linuxa.\n"
-"\n"
-"Ako ne znate to�no �to radite, izaberite \"Prvi sektor diska\n"
-"(MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX �e poku�ati prona�i PCI SCSI adapter(e). Ukoliko DrakX\n"
-"prona�e SCSI adapter i zna koji upravlja�ki program da koristi, on �e "
-"automatski biti\n"
-"instaliran.\n"
-"\n"
-"\n"
-"Ukoliko nemate SCSI adapter, ISA SCSI adapter ili PCI SCSI adapter koji\n"
-"DrakX ne mo�e prepoznati, biti �ete pitani da li imate SCSI adapter u va�em\n"
-"sustavu. Ukoliko nemate adapter, mo�ete kliknuti na \"Ne\". Ukoliko kliknete "
-"na\n"
-"\"Da\", dobiti �ete popis upravlja�kih programa odakle mo�ete izabrati va�\n"
-"specifi�an adapter.\n"
-"\n"
-"\n"
-"Ako trebate ru�no specifirati va� adapter, DrakX �e pitati da li �elite \n"
-"specifirati opcije za njega. Trebali biste dozvoliti DrakX-u da isproba "
-"opcije za\n"
-"hardware. Ovo obi�no radi dobro.\n"
-"\n"
-"\n"
-"Ako ne, trebati �ete navesti opcije za upravlja�ki program. Molimo "
-"pregledajte User\n"
-"Guide (poglavlje 3, sekciju \"Collective informations on your hardware\") za "
-"preporuke\n"
-"o pribavljanju ovih informacija iz dokumentacije hardware-a, sa \n"
-"proizvo�a�evog Web site-a (ukoliko imate Internet pristup) ili iz Microsoft "
-"Windows-a\n"
-"(ukoliko ga imate na va�em sustavu)."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Mo�ete dodati dodatne unose za yaboot, ili za drugi operativni sustav,\n"
-"alternativne kernele, ili za spasonosnu boot sliku.\n"
-"\n"
-"\n"
-"Za druge OS-ove - unos se sastoji samo od labele i root particije.\n"
-"\n"
-"\n"
-"Za Linux, postoji nekoliko mogu�ih opcija: \n"
-"\n"
-"\n"
-"  - Labela: Ovo je jednostavno ime koje �ete napisati u yaboot promptu za "
-"odabir ove \n"
-"boot opcije.\n"
-"\n"
-"\n"
-"  - Slika: Ovo �e biti ime kernela pri podizanju. Tipi�no vmlinux ili\n"
-"varijacija vmlinux-a sa ekstenzijom.\n"
-"\n"
-"\n"
-"  - Root: root ure�aj ili '/' za va�u Linux instalaciju.\n"
-"\n"
-"\n"
-"  \n"
-"  - Dodatak: Na Apple hardware-u, kernel dodatak opcija se koristi vrlo "
-"�esto za\n"
-"pomo� pri inicijaliziranju video hardware-a, ili za omogu�avanje emulacije "
-"tastaturnih mi�jih gumba\n"
-"zbog �estog nedostatka 2-og ili 3-eg mi�jeg gumba na Apple mi�evima. "
-"Slijede�e \n"
-"su neki primjeri:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: Ova opcija se mo�e koristiti ili za u�itavanje inicijalnih "
-"modula, prijenego �to je boot\n"
-"ure�aj raspolo�iv, ili za u�itavanje ramdisk slike za spasonosne boot "
-"situacije.\n"
-"\n"
-"\n"
-"  - Initrd-veli�ina: Podrazumijevana veli�ina ramdisk-a je op�enito 4096 "
-"byte-ova. Ukoliko trebate\n"
-"alocirati ve�i ramdisk, ova opcija mo�e biti kori�tena.\n"
-"\n"
-"\n"
-"  - �itaj-Pi�i: Normalno je 'root' particija inicijalno podignuta u �itaj-"
-"samo, za mogu�nost\n"
-"provjere datote�nog sustava prije nego sustav postane '�iv'. Mo�ete "
-"nadja�ati ovu opciju ovdje.\n"
-"\n"
-"\n"
-"  - NoVideo: Ako se Apple hardware poka�e kao iznimno problemati�an, mo�ete\n"
-"izabrati ovu opciju za podizanje u 'novideo' modu, sa native framebuffer "
-"podr�kom.\n"
-"\n"
-"\n"
-"  - Podrazumijevano: Izabire ovaj unos kao podrazumijevani Linux izbor, "
-"mogu�e izbirati sa samo\n"
-"pritiskom ENTER-a na yaboot pitanju. Ovaj unos �e tako�er biti ozna�en sa "
-"'*', ukoliko\n"
-"koristite TAB za pregledavanje boot izbora."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot je bootloader za NewWorld MacIntosh hardware. U mogu�nosti je\n"
-"podi�i ili GNU/Linux, MacOS, ili MacOSX, ukoliko postoje na va�em ra�unalu.\n"
-"Normalno, ti drugi operativni sustavi su ispravno prona�eni i\n"
-"instalirani. Ukoliko to nije slu�aj, mo�ete dodati unos ru�no na ovom\n"
-"zaslonu. Budite pa�ljivi da izaberete ispravne parametre.\n"
-"\n"
-"\n"
-"Yaboot glavne opcije su:\n"
-"\n"
-"\n"
-"  - Init Poruka: Jednostavna tekst poruka koja se prika�e prije pitanja o\n"
-"podizanju.\n"
-"\n"
-"\n"
-"  - Boot Ure�aj: Ozna�ava gdje �elite staviti informaciju potrebnu za \n"
-"podizanje GNU/Linux-a. Op�enito, morati �ete imati postavljenu bootstrap "
-"particiju prije, \n"
-"da mo�e dr�ati ovu informaciju.\n"
-"\n"
-"\n"
-"  - Otvorena Firmware Pauza: Za razliku od LILO-a, postoje dvije raspolo�ive "
-"pauze sa\n"
-"yaboot-om.  Prva pauza se mjeru sekundama i na tom mjestu mo�ete \n"
-"birati izme�u CD-a, OF boot-a, MacOS-a ili Linux-a.\n"
-"\n"
-"\n"
-"  - Kernel Boot �ekanje: Ovo �ekanje je sli�no LILO boot �ekanju. Poslije \n"
-"izabiranja Linux-a, imati �ete pauzu od 0.1 sekunde prije nego "
-"podrazumijevani\n"
-"kernel opis bude odabran.\n"
-"\n"
-"\n"
-"  - Omogu�i CD Boot?: Postavljanje ove opcije �e vam dozvoliti da mo�ete "
-"izabrati 'C' za CD na\n"
-"prvom pitanju pri podizanju.\n"
-"\n"
-"\n"
-"  - Omogu�i OF Boot?: Postavljanje ove opcije �e vam dozvoliti da mo�ete "
-"izabrati 'N' za Open\n"
-"Firmware prvi prvom pitanju pri podizanju.\n"
-"\n"
-"\n"
-"  - Podrazumijevani OS: Mo�ete izabrati koji OS �ete podi�i podrazumijevano "
-"kada Open Firmware \n"
-"pauza istekne."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Izaberite hard disk kojeg �elite obrisati kako bi instalirali va�u\n"
-"novu Mandrake Linux particiju. Budite pa�ljivi, svi postoje�i podaci\n"
-"biti �e izgubljen i ne�e se mo�i povratiti!"
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Izaberite \"U redu\" ukoliko �elite obrisati sve podatke i\n"
-"postoje�e particije na navedenom hard disku. Budite pa�ljivi, nakon "
-"klikanja\n"
-"na \"U redu\", ne�ete mo�i povratiti bilo kakve postoje�e podatke ili "
-"particije\n"
-"na ovom hard disku, uklju�uju�i Windows podatke.\n"
-"\n"
-"\n"
-"Pritisnite na \"Odustani\" za prekidanje ove operacije bez gubljenja bilo\n"
-"kakvih postoje�ih podataka i particija na ovom hard disku."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Morate tako�er formatirati %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Izabrali ste slijede�e poslu�itelje: %s\n"
-"\n"
-"\n"
-"Ti poslu�itelji biti �e postavljeno aktivirani. Oni nemaju poznatih "
-"sigurnosnih\n"
-"propusta, ali neki novi mogu biti prona�eni. U tom slu�aju, morate ga "
-"nadograditi\n"
-"�to prije mogu�e.\n"
-"\n"
-"\n"
-"Da li zaista �elite instalirati te poslu�itelje?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Ne mogu koristiti broadcast bez NIS domene"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Umetnite FAT formatiranu disketu u pogon %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ova disketa nije FAT formatirana"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Za kori�tenje spremljenog odabira paketa, podignite instalaciju sa ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Gre�ka prilikom �itanja datoteke %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Neki hardware na va�em ra�unalu treba ``vlasni�ke'' upravlja�ke programe\n"
-"kako bi proradio. Mo�ete na�i vi�e informaciju o tome na: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Morate imati root particiju.\n"
-"Prvo napravite particiju (ili kliknite na postoje�u) te\n"
-"odaberite akciju ``Mjesto monitranja'' te odaberite `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Morate imati swap particiju"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Swap particija ne postoji\n"
-"\n"
-"Da ipak nastavim?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Morate imati FAT particiju montiranu na /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Koristi slobodan prostor"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Koristi postoje�e particije"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nema postoje�ih particija koje bih mogao upotrijebiti"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Koristi Windows particiju za loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Koju particiju �elite koristiti za Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Odaberite veli�inu"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Veli�ina korijenske particije u MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Veli�ina swap particiju u MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Iskoristi slobodan prostor na Windows particiji"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kojoj particiji �elite promijeniti veli�inu?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Izra�unavam granice Windows datote�nog sustava"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Program koji mjenja veli�inu FAT-a ne mo�e rukovati va�om particijom, \n"
-"slijede�a gre�ka se dogodila: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Va�a Windows particija je prefragmentirana, molim pokrenite ``defrag'' prvo."
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"UPOZORENJE!\n"
-"\n"
-"DrakX sada mora promijeniti veli�inu va�e Windows particije\n"
-"Budite vrlo oprezni budu�i da je ova operacija\n"
-"izuzetno opasna. Ukoliko jo� niste mijenjali veli�inu particije molim\n"
-"iza�ite prvo iz instalacije, pokrenite scandisk pod Windowsima (opcionalno "
-"pokrenite defrag), tada ponovno pokrenite instalaciju.\n"
-"Tako�er preporu�ljivo je da sa�uvate va�e podatke (napravite backup).\n"
-"Kada ste sigurni da �elite nastaviti, pritisnite U redu."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Koliku veli�inu �elite zadr�ati za windowse"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "particija %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Mijenjanje FAT veli�ine nije uspjelo: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nema FAT particije za mjenjanje veli�ine ili za kori�tenje loopback-a (ili "
-"nema dovoljno prostora)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Obri�i cijeli disk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Ukloni Windowse(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Imate vi�e od jednog hard diska, na koji �elite instalirati Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "SVE postoje�e particije i podaci biti �e izgubljeni na disku %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Proizvoljno particioniranje diska"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Koristi fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sada mo�ete razdijeliti %s.\n"
-"Kada ste gotovi ne zaboravite spremiti postavu sa `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemate dovoljno slobodnog prostora na va�oj Windows particiji"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ne mogu prona�i bilo kakvo mjesto za instaliranje"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX �arobnjak za particioniranje je prona�ao slijede�a rje�enja:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Particioniranje neuspjelo: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Podi�em mre�u"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Onemogu�ujem mre�u"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Dogodila se gre�ka, ali neznam kako s njom lijepo rukovati.\n"
-"Nastavite dalje na vlastiti rizik."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dupliciraj mjesto monitranja %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Neki va�ni paketi nisu se instalirali pravilno.\n"
-"Ili je va� cdrom pogon ili cd medij u defektu.\n"
-"Provjerite cdrom na instaliranom ra�unalu koriste�i \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Dobrodo�li u %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Disketni pogon nije dostupan"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Pokre�em korak `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Va� sustav je slab na resursima. Mo�ete imati nekih problem prilikom\n"
-"instalacije Mandrake Linux-a. Ukoliko se to desi, mo�ete probati tekstualnu\n"
-"instalaciju. Za to, pritisnite `F1' kada podi�ete CDROM, i unesite `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Instalacijski razred"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Molim izaberite jedan od slijede�ih razreda instalacije:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ukupna veli�ina izabranih grupa je otprilike %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ukoliko �elite instalirati manje od ove veli�ine,\n"
-"izaberite postotak paketa koliko �elite instalirati.\n"
-"\n"
-"Mali postotak �e instalirati samo najva�nije pakete;\n"
-"dok postotak od 100%% �e instalirati sve odabrane pakete."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Imate mjesta na va�em disku za samo %d%% paketa.\n"
-"\n"
-"Ukoliko �elite instalirati manje od ovoga,\n"
-"izaberite postotak paketa koliko �elite instalirati.\n"
-"Mali postotak �e instalirati samo najva�nije pakete;\n"
-"dok postotak od %d%% �e instalirati koliko god je paketa mogu�e."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Detaljniji izbor nalazi se u slijede�em koraku."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Odaberite postotak paketa koje �elite instalirati"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Odabir grupe paketa"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Individualan odabir paketa"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukupna veli�ina: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Lo� paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ime: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Ina�ica: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Veli�ina: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Zna�aj: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Ne mo�ete ozna�iti ovaj paket budu�i da nema dovoljno mjesta gdje ga se mo�e "
-"instalirati"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Slijede�i paketi �e biti instalirani"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Slijede�i paketi �e biti uklonjeni"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Ne mo�ete ozna�iti/odzna�iti ovaj paket"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Budu�i da je ovo obvezni paket ne mo�ete ga odzna�iti"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ne mo�ete odzna�iti ovaj paket budu�i da je ve� instaliran"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ovaj paket treba nadograditi\n"
-"Da li ste sigurni da ga �elite odzna�iti?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ne mo�ete odzna�iti ovaj paket budu�i da ga treba nadograditi"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Prika�i automatski odabrane pakete"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instaliraj"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "U�itaj/Spremi na disketu"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Dogra�ujem izbor paketa"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimalna instalacija"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Odaberite pakete koje �elite instalirati"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instaliram"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Procjenjujem"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Preostalo vrijeme"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Molimo pri�ekajte, Pripremam instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paketa"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaliram paket %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Prihvati"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Odbij"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Promjenite va� Cd-Rom!\n"
-"\n"
-"Ubacite Cd-Rom ozna�en \"%s\" u va� pogon i pritisnite U redu kada "
-"zavr�ite.\n"
-"Ukoliko ga nemate, pritisnite Odustani kako bi izbjegli instalaciju sa ovog "
-"Cd-Rom-a."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Da ipak nastavim?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Javila se gre�ka prilikom sortiranja paketa:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Pojavila se gre�ka kod instalacije paketa:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Upozorenje\n"
-"\n"
-"Molimo pro�itajte pa�ljivo �injenice ni�e. Ukoliko se ne sla�ete sa bilo\n"
-"kojim dijelom, nemate dozvolu instalirati slijede�i CD medij. Pritisnite "
-"'Odbij' \n"
-"za nastavak instalacije bez kori�tenja ovog medija.\n"
-"\n"
-"\n"
-"Neke komponente sadr�ane u slijede�em CD mediju nisu pokrivene\n"
-"GPL licencom ili sli�nim ugovorom. Svaka takva komponenta je tada\n"
-"pokrivena stavkama i uvjetima svojim vlastitim specifi�nim licencama. \n"
-"Molimo pro�itajte pa�ljivo i slo�ite se specifi�nim licencama prije \n"
-"va�eg kori�tenja ili redistribuiranja navedenih komponenti. \n"
-"Takve licence op�enito zabranjuju prijenos, dupliciranje \n"
-"(osim za spasonosne kopije), redistribuciju, reverzno in�enjerstvo, \n"
-"disasembliranje, dekompilaciju ili promjenu komponente. \n"
-"Svako kr�enje ugovora �e odmah prekinuti va�a prava kod\n"
-"specifi�ne licence. Ako vam stavke specifi�ne licence ne odobre takva\n"
-"prava, obi�no ne mo�ete instalirati programe na vi�e od jednog\n"
-"sustava, ili prilagoditi ga za kori�tenje na mre�i. Ako ste u nedoumici,\n"
-"kontaktirajte direktno distributera ili urednika komponente. \n"
-"Prijenos tre�im osobama ili kopiranje takvih komponenti uklju�uju�i \n"
-"dokumentaciju je obi�no zabranjeno.\n"
-"\n"
-"\n"
-"Sva prava na komponente slijede�eg CD medija pripadaju njihovim \n"
-"uva�enim autorima i za�ti�eni su intelektualnim vlasni�tvom i \n"
-"autorskim zakonima primjenjivim na software-ske programe.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Pojavila se gre�ka"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Da li zaista �elite napustiti instalaciju?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licencni dogovor"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Uvod\n"
-"\n"
-"Operativni sustav i njegove razli�ite komponente raspolo�ive u Mandrake "
-"Linux distribuciji \n"
-"�e se zvati \"Software-ski Produkti\" daljnje u tekstu. Software-ski "
-"Produkti  uklju�uju, ali nisu \n"
-"ograni�eni na, skup programa, metoda, zakona i dokumentacija vezanih uz "
-"operativni\n"
-"sustav i razli�ite komponente Mandrake Linux distribucije.\n"
-"\n"
-"\n"
-"1. Licencni Dogovor\n"
-"\n"
-"Molimo pa�ljivo pro�itajte ovaj dokument. Ovaj dokument je licenci dogovor "
-"izme�u vas i \n"
-"MandrakeSoft S.A. koji se primjenjuje na Software-ske produkte.\n"
-"Instaliranjem, dupliciranjem ili kori�tenjem Software-skih Produkata u bilo "
-"kojem obliku,eksplicitno \n"
-"prihva�ate i potpuno se sla�ete da �ete prihvatiti stavke i uvjete ove "
-"Licence. \n"
-"Ukoliko se ne sla�ete sa bilo kojim dijelom licence, nije vam dozvoljeno "
-"instalirati, duplicirati ili koristiti \n"
-"Software-ski produkt. \n"
-"Svaki poku�aj instalacije, dupliciranja ili kori�tenja Software-skog "
-"Produkta u obliku kojem ne prili�i \n"
-"sa stavkama i uvjetima ove licence je prazno i uni�titi �e va�a prava pod "
-"ovom\n"
-"Licencom. Uslijed uni�tenja licence, morate odmah uni�ititi sve kopije \n"
-"Software-skog Produkta.\n"
-"\n"
-"\n"
-"2. Ograni�eno Jamstvo\n"
-"\n"
-"Software-ski Produkt i pripadaju�a dokumentacija je pru�ena \"kako je\", bez "
-"jamstva, do \n"
-"mjere dozvoljene zakonom.\n"
-"MandrakeSoft S.A. ne�e, u bilo kojim slu�ajevima i do te mjere dozvoljene "
-"zakonom, biti odgovaran za bilo kakvu specijalnu,\n"
-"nesretnu, direktnu ili indirektnu �tetu bilo kakvu (uklju�uju�i granice "
-"�tete od gubitka\n"
-"posla, prestanka posla, financijskih gubitaka, legalnih pla�anja i kazni "
-"posljedica sudskih \n"
-"presuda, ili bilo kakvih drugih posljedica gubitka) �to je posljedica "
-"kori�tenja ili nemogu�nosti kori�tenja Software-skog \n"
-"Produkta, iako je MandrakeSoft S.A. bio upozoren od mogu�nosti takve \n"
-"�tete.\n"
-"\n"
-"OGRANI�ENA ODGOVORNOST POVEZANA SA POSJEDOVANJEM ILI KORI�TENJEM ZABRANJENOG "
-"SOFTWARE-A U NEKIM ZEMLJAMA\n"
-"\n"
-"Do granice dozvoljene zakonom, MandrakeSoft S.A. ili njegovi distributori "
-"ne�e, u bilo kakvim slu�ajevima, biti \n"
-"odgovaran za bilo kakvu specijalnu, nesretnu, direktnu ili indirektnu �tetu "
-"bilo kako (uklju�uju�i \n"
-"ograni�ene �tete zbog gubitka posla, prekida posla, financijskog gubitka, "
-"legalnih pla�anja \n"
-"i kazni posljedica sudskih presuda, ili bilo kakvih drugih "
-"posljedicagubitka) �to je posljedica \n"
-"posjedovanja ili kori�tenja software-skih komponenti ili kao posljedica "
-"skidanja (download-a) software-skih komponenti \n"
-"sa jednog od Mandrake Linux site-ova koja su zabranjena ili ograni�ena u "
-"nekim zemljama po lokalnim zakonima.\n"
-"Ova ograni�ena odgovornost se primjenjuje na, ali nije ograni�ena, jake "
-"kriptografske komponente \n"
-"uklju�ene u Software-ski Produkt.\n"
-"\n"
-"\n"
-"3. GPL Licenca i sli�ne licence\n"
-"\n"
-"Software-ski Prodkt se sastoji od komponenti napravljenih od raznih ljudi "
-"ili entiteta.  Veliki \n"
-"broj tih komponenti je pokriveno pod stavkama i uvjetima GNU Op�e Javne \n"
-"Licence, u daljnjem tekstu zvana \"GPL\", ili  sli�nih licenci. Veliki broj "
-"tih licenci dozvoljava vam kori�tenje, \n"
-"dupliciranje, prilago�avanje ili redistribuciju komponenti koju ona pokriva. "
-"Molimo pro�itajte pa�ljivo stavke \n"
-"i uvjete licencnog dogovora svake komponente prije kori�tenja bilo koje "
-"komponente. Bilo koje pitanje \n"
-"o licenci komponente trebao bi biti adresiran autoru komponente a ne "
-"MandrakeSoft-u.\n"
-"Programe razvijeni od strane MandrakeSoft S.A. su pokriveni GPL licencom. "
-"Dokumentacija napisana \n"
-"od strane MandrakeSoft S.A. je pokrivena specifi�nom licencom. Molimo "
-"pogledajte dokumentaciju za \n"
-"vi�e detalja.\n"
-"\n"
-"\n"
-"4. Prava na intelektualno vlasni�tvo\n"
-"\n"
-"Sva prava komponenti Software-skog Produkta pripada njihovim uva�enim "
-"autorima i \n"
-"za�ti�eni su intelektualnim vlasni�tvom i autorskim zakonima primjenjivim na "
-"software-ske programe.\n"
-"MandrakeSoft S.A. zadr�ava svoje pravo za izmjenu ili prilago�avanje "
-"Software-skog Produkta, kao cijelinu ili u\n"
-"dijelovima, u svim slu�ajevima za sve namjene.\n"
-"\"Mandrake\", \"Mandrake Linux\" i pripadaju�i logoi su za�ti�eni prodajni "
-"znaci MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Dr�avni zakoni \n"
-"\n"
-"Ukoliko neki dio ovog dogovora govori ni�ta, ilegalan ili neprikladan "
-"sudstvu, taj \n"
-"dio mo�e se isklju�iti iz ovog ugovora. Ali ostajete obveznu drugim "
-"primjenjivim sekcijama\n"
-"ugovora.\n"
-"Za stavke i uvjete ove Licence je nadle�an zakon Francuske.\n"
-"Sve sporove oko stavaka licence �e preferirano biti ure�eno sudom. Kao "
-"zadnji \n"
-"izlaz, spor �e biti predan odgovaraju�em Sudu u Parizu - Francuska.\n"
-"Za bilo kakva pitanja o ovom dokumentu, molimo kontaktirajte MandrakeSoft S."
-"A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tipkovnica"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Molim, izaberite raspored tipkovnice."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Ovdje je cijeli popis raspolo�ivih tipkovnica"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Koji instalacijski razred �elite?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instaliraj/Nadogradi"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Da li je ovo instalacija ili nadogradnja?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Preporu�eno"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Dogradnja"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Samo dogradi pakete"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Molim izaberite va�u vrstu mi�a."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port mi�a"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Izaberite na kojem serijskom portu je mi� priklju�en."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulacija gumbova"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulacija 2 gumba"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulacija 3 gumba"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Pode�avam PCMCIA kartice..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Pode�avam IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nema dostupnih particija"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Tra�im particije kako bi prona�ao mjesta montiranja"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Odaberite mjesta montiranja"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ne mogu pro�itati particijsku tablicu, previ�e je koruptirana za mene :(\n"
-"Mogu poku�ati sa brisanjem lo�ih particija (SVI PODACI �e biti "
-"izgubljeni!).\n"
-"Drugo rje�enje je onemogu�iti DrakX-u da mjenja particijsku tablicu.\n"
-"(gre�ka je %s)\n"
-"\n"
-"Da li se sla�ete da izgubite sve particije?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake nije uspio pro�itati va�u particijsku tablice.\n"
-"Nastavite o vlastitoj odgovornosti."
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nema slobodnog mjesta za 1 MB bootstrap! Instalacija �e nastaviti, ali za "
-"podizanje va�eg sustava, trebati �ete napraviti bootstrap particiju u "
-"DiskDrake-u"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Niti jedna root particija nije prona�ena da se obavi dogradnja"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Korijenska particija"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Koja je korijenska particija  (/) va�eg sustava?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Morate ponovo pokrenuti sustav kako bi se aktivirala promjena particijske "
-"tablice"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Izaberite particije koje �elite formatirati"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Provjeri za lo�e blokove?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatiram particije"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Stvaram i formatiram datoteku %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nema dovoljno swapa za zavr�etak instalacije, molim dodajte jo�"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Tra�im dostupne pakete"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Tra�im pakete koje mogu nadograditi"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Va� sustav nema dovoljno prostora za instalaciju ili dogradnju (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Kompletno (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Preporu�eno (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Molimo izaberite u�itivanje ili spremanje izbora paketa na disketu.\n"
-"Format je isto kao auto_install napravljene diskete."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "U�itaj sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "U�itavam sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Odabir paketa"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Umetnite disketu koja sadr�ava izbor paketa"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Spremi na disketu"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Izabrana veli�ina je ve�a nego raspolo�iv prostor"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Tip instalacije"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Niste izabrali niti jednu grupu paketa\n"
-"Izaberite minimalnu instalaciju ako �elite"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Sa X-ima"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Sa osnovnom dokumentacijom (preporu�eno!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Stvarno malena instalacija (posebice bez urpmia)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ako imate sve dolje navedene CDove kliknite U redu.\n"
-"Ako nemate niti jedan od navedenih CD kliknite Odustani.\n"
-"Ako imate samo neke od dolje navedenih CDa odzna�ite one koje nemate i "
-"kliknite U redu."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom naslovljen \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Pripremam instalaciju"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaliram paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Postava nakon instalacije"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Molim, umetnite Boot disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Molim, umetnite Update Modules disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Sada imate mogu�nost za skidanje software-a za enkripciju.\n"
-"\n"
-"UPOZORENJE:\n"
-"\n"
-"Zbog razli�itih op�ih zahtjeva primjenjivih na ovaj software i presuda\n"
-"raznih sudova, kupac i/ili krajnji korisnik ovog software-a treba se\n"
-"uvjeriti da zakoni njegovog/e sudstva dozvoljava mu/joj da skine, spremi\n"
-"i/ili koristi ovaj software.\n"
-"\n"
-"U dodatku kupac i/ili krajnji korisnik mora dijelom biti svjestan da ne "
-"prekr�i\n"
-"zakon svoga sudstva. Ukoliko kupac i/ili krajnji korisnik ne \n"
-"po�tuje stavke tih primjenjivih zakona, mo�e ga dovesti do ozbiljnih\n"
-"sankcija.\n"
-"\n"
-"U bilo kojem slu�aju Mandrakesoft ili njegovi proizvo�a�i i/ili nabavlja�ine "
-"mogu biti odgovorni\n"
-"za specijalne, indirektne ili slu�ajne �tete bilo kako (uklju�uju�i, ali ne\n"
-"ograni�ana na gubitak profita, prekid posla, gubitak komercijalnih podataka\n"
-"i\n"
-"drugih nov�anih gubitaka, i eventualne odgovornosti i isplate naknade �to "
-"treba biti pla�eno\n"
-"odlukom suda) �to je posljedica kori�tenja, posjedovanja ili samog\n"
-"skidanja ovog software-a, kojemu �e kupac i/ili krajnji korisnik mo�e\n"
-"eventualno imati pristup poslije potpisivanja postoje�eg ugovora/dogovora.\n"
-"\n"
-"\n"
-"Za bilo kakve upite u svezi ovog ugovora, molimo kontaktirajte \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-#, fuzzy
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Imate mogu�nost skidanja (downloada) paketa za dogradnju koji su\n"
-"iza�li poslije nego �to je distribucija postala raspolo�iva.\n"
-"\n"
-"Dobiti �ete sigurnosne popravke i popravke od gre�aka, ali trebate imati\n"
-"Internet vezu konfiguriranu za nastavak.\n"
-"\n"
-"Da li �elite nastaviti ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Kontaktiram Mandrake Linux web site za dobivanje popisa raspolo�ivih mirrora"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izaberite mirror sa kojeg �elite skinuti pakete"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Spajam se na mirror kako bih pribavio popis dostupnih paketa"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Koja je va�a vremenska zona?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Va� hardverski sat namje�ten je na GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatska vremenska sinkronizacija (koriste�i NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Poslu�itelj"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Udaljeni CUPS poslu�itelj"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nema pisa�a"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Da li imate ISA zvu�nu karticu?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Pokrenite \"sndconfig\" poslije instalacije za pode�avanje va�e zvu�ne "
-"kartice"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nije prona�ena zvu�na kartica. Probajte \"harddrake\" poslije instalacije"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sumarno"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mi�"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Vremenska zona"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Pisac"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN kartica"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Zvu�na kartica"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV kartica"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokalne datoteke"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Pode�avanje root lozinke"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez lozinke"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Ova lozinka je prejednostavna (lozinka mora sadr�avati barem %d znakova)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Provjera autenti�nosti"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Poslu�itelj"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS domena"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Poslu�itelj"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Proizvoljna boot disketa omogu�ava na�in podizanja va�eg Linux sustava bez\n"
-"ovisnosti o normalnom bootloader-u. Ovo je korisno ukoliko ne �elite "
-"instalirati\n"
-"SILO na va� sustav, ili je drugi operativni sustav uklonio SILO, ili SILO "
-"ne\n"
-"�eli raditi sa va�om konfiguracijom hardware-a. Proizvoljna boot disketa "
-"tako�er mo�e biti kori�tena sa\n"
-"Mandrake spasonosnom slikom, omogu�avaju�i tako lak�e spa�avanje od raznih "
-"sustavskih\n"
-"gre�aka.\n"
-"\n"
-"Ako �elite napraviti boot disketu za va� sustav, ubacite disketu u prvi\n"
-" pogon i pritisnite \"U redu\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Prvi disketni pogon"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Drugi disketni pogon"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Presko�i"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Proizvoljna boot disketa omogu�ava na�in podizanja va�eg Linux sustava bez\n"
-"ovisnosti o normalnom bootloader-u. Ovo je korisno ukoliko ne �elite "
-"instalirati\n"
-"LILO (ili grub) na va� sustav, ili je drugi operativni sustav uklonio LILO, "
-"ili LILO ne\n"
-"�eli raditi sa va�om konfiguracijom hardware-a. Proizvoljna boot disketa "
-"tako�er mo�e biti kori�tena sa\n"
-"Mandrake spasonosnom slikom, omogu�avaju�i tako lak�e spa�avanje od raznih\n"
-" sustavskih gre�aka.\n"
-"Da li �elite napraviti proizvoljnu boot disketu za va� sustav?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "�alim, me�utim disketni pogon nije dostupan"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Izaberite disketni pogon koji �elite koristiti za izradu boot diskete"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Umetnite disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Stvaram boot disketu"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Pripremam bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"�ini se da imate OldWorld ili Nepoznato\n"
-" ra�unalo, yaboot bootloader ne�e mo�i raditi kod vas.\n"
-"Instalacija �e nastaviti, ali �ete morati\n"
-" koristiti BootX da podignete va�e ra�unalo"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Da li �elite koristiti aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Gre�ka prilikom instalacije aboot-a, \n"
-"probati nasilno instalirati iako to mo�e uni�titi prvu particiju?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instaliranje bootloadera"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Instalacija bootloader-a nije uspjela. Prijavljena je slijede�a gre�ska:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Trebati �ete promjeniti va� Otvoreni Firmware boot-ure�aj kako bi\n"
-" omogu�ili bootloader. Ukoliko ne �elite vidjeti bootloader prompt pri\n"
-" podizanju, pritisnite Command-Option-O-F pri podizanju i unesite:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Tada napi�ite: shut-down\n"
-"Pri slijede�em podizanju trebali biste vidjeti prompt bootloadera."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Umetnite praznu disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Pravim auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Niste zavr�ili sve korake.\n"
-"\n"
-"�elite li zaista zavr�iti?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"�estitam, instalacija je kompletna.\n"
-"Uklonite boot medij i pritisnite return za ponovno podizanje.\n"
-"\n"
-"\n"
-"Za informacije o popravcima koji su raspolo�ivi za ovo izdanje Mandrake "
-"Linux-a,\n"
-"konzultirajte Eratu raspolo�ivu na\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informacije o konfiguriranju va�eg sustava je raspolo�ivo u poslije\n"
-"instalacijskom poglavlju od Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Napravi auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Auto instalacija mo�e biti potpuno automatska ukoliko �elite,\n"
-"u tom slu�aju �e preuzeti hard disk!!\n"
-"(ovo zna�i za instalaciju na drugo ra�unalo).\n"
-"\n"
-"Mo�ete preferirati da ponovite instalaciju.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatski"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ponovno prika�i"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Spremi odabir paketa"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux instalacija %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> izme�u elemenata  | <Space> bira | <F12> slijede�i zaslon"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu nedostaje"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Izaberite datoteku"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Napredno"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Osnovno"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Molim pri�ekajte"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Pro�iri stablo"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sa�mi stablo"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Prebaci izme�u ravno i grupno sortiranog"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Krivi izbor, poku�ajte ponovo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Va� izbor? (uobi�ajeno %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Unosi koje trebate popuniti:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Va� izbor? (0/1, uobi�ajeno '%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Gumb `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Da li �elite kliknuti na ovaj gumb? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Va� izbor? (uobi�ajeno `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Postoji mnogo stvari za odabir iz (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Molim, izaberite prvi broj do 10 kojeg �elite urediti,\n"
-"ili samo pritisnite Enter za nastavak.\n"
-"Va� izbor? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Obavijest, naziv promijenjen:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Ponovno Po�alji"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "�e�ka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Njema�ka"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "�panjolska"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finska"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francuska"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norve�ka"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Poljska"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruska"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "�vedska"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK tipkovnica"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US tipkovnica"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanska"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenska (stara)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenska (pisa�a ma�ina)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenska (fonetska)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbejd�anska (latinica)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgijska"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armenska (fonetska)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bugarska"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilska (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bjeloruska"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "�vicarska (Njema�ki raspored)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "�vicarska (francuski raspored)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "�e�ka (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Njema�ka (bez mrtvih tipaka)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danska"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (USA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norve�ka)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (�vedska)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonska"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijska  (\"Ruski\" raspored)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijska  (\"Latin\" raspored)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Gr�ka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ma�arska"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Hrvatska"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraelska"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Izraelska (fonetska)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranska"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandska"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Talijanska"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japanska (106 tipaka)"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korejska tipkovnica"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latino ameri�ka"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanska AZERTY (stara)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanska AZERTY (nova)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanska \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanska \"fonetska\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvija"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonska"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Nizozemska"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Poljska (qwerty raspored)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Poljska (qwertz raspored)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugalska"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadska (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumunjska (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumunjska (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruska (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovenska"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slova�ka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slova�ka (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Srpska (�irilica)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tablica"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tajlandska tipkovnica"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik tipkovnica"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turska (tradicionalni \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turska (moderna  \"Q\" model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrajinska"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US keyboard (internacionalna)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vijetnamska \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavenska (latini�na)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kru�no montiranje %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Ukloni logi�ki volumen prvo\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA podr�ka vi�e ne postoji za 2.2 kernele. Molimo koristite 2.4 kernel."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - mi�"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generi�ki PS2 mi� s kota�i�em"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 gumb"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generi�ki mi� s 2 gumba"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generi�ki"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Kota�i�"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serijski"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generi�ki mi� s 3 gumba"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC serije"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Serije"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mi� (serijski, stari C7 tip)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmi�"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 gumba"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 gumba"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "niti jedan"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Nema mi�a"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Molimo istestirajte mi�a."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Za aktiviranje mi�a,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "POMAKNITE VA� KOTA�I�!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Zavr�i"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Slijede�e ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Prija�nje"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Spoji se na Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Naj�e��i na�in da se pove�ete sa adsl-om je pppoe.\n"
-"Neke veze koriste pptp, a nekoliko koriste dhcp.\n"
-"Ukoliko neznate, izaberite 'koristi pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "koristi dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "koristi pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "koristi pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Koji dhcp klijent �elite koristiti?\n"
-"Pretpostavljeni je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nije prona�en niti jedan mre�ni adapter na va�em sustavu.\n"
-"Ne mogu postaviti ovu vrstu veze."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Odaberite mre�ni me�usklop"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Molimo izaberite sa kojim mre�nim adapterom se �elite priklju�iti na Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ne mogu prona�i niti jednu mre�nu karticu"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Pode�avam mre�u"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Molim unesite ime ra�unala ukoliko ga znate.\n"
-"Neki DHCP serveri zahtjevaju specifiranje imena ra�unala da bi radili.\n"
-"Va�e ime ra�unala bi trebalo biti potpuno-kvalificirano ime ra�unala,\n"
-"kao �to je ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Ime ra�unala"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "�arobnjak mre�nih postavki"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Vanjski ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interna ISDN kartica"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kakav tip ISDN veze koristite ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Koju ISDN konfiguraciju preferirate?\n"
-"\n"
-"* Stara konfiguracija koristi isdn4net. Ona sadr�i sna�ne\n"
-"  alate, ali je te�ka za konfiguriranje, nije standardna.\n"
-"\n"
-"* Nova konfiguracija je lak�a za razumiti, mnogo standardnija,\n"
-"  ali sa manje alata.\n"
-"\n"
-"Preporu�amo laku konfiguraciju.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nova konfiguracija (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracija (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN postavke"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Izaberite va�eg pru�atelja Internet usluga.\n"
-" Ako nije na popisu odaberite Drugi"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europski protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europski protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol za ostatak svijeta"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol za ostatak svijeta \n"
-" bez D-kanala (za iznajmljene linije)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Koji protokol �elite koristiti ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Kakvu karticu posjedujete?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ne znam"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ukoliko imate ISA karticu, vrijednosti na slijede�em zaslonu trebale bi biti "
-"dobre.\n"
-"\n"
-"Ukoliko imate PCMCIA karticu, morate znati irq i io va�e kartice.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Prekini"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Nastavi"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Kakvu ISDN karticu imate?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Prona�ao sam ISDN PCI karticu me�utim ne znam kojeg je tipa. Molim izaberite "
-"va�u PCI karticu na slijede�em ekranu."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nisam na�ao niti jednu ISDN PCI karticu. Molim izaberite va�u PCI karticu na "
-"slijede�em ekranu."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Izaberite serijski port na kojemu se nalazi modem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Podesi dialup"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Ime veze"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonski broj"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Prijavno ime"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Temeljem skripta"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal-zasnovano"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Ime domene"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Prvi DNS poslu�itelj (opciono)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Drugi DNS poslu�itelj (opciono)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo�ete isklju�iti ili ponovno konfigurirati va�u vezu."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Mo�ete ponovno konfigurirati va�u vezu."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Trenutno ste spojeni na internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo�ete se spojiti na Internet ili ponovno konfigurirati va�u vezu."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Niste trenutno spojeni na Internet."
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Povezan"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Odspoji..."
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Podesi mre�u"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internet veza i postava"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Sada �emo podesiti %s vezu."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Sada �emo podesiti %s vezu.\n"
-"\n"
-"\n"
-"Pritisnite U redu za nastavak."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Mre�ne postavke"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Po�to radite mre�nu instalaciju, va�a mre�a je ve� konfigurirana.\n"
-"Pritisnite U redu da zadr�ite postoje�e postavke, ili Odustani za ponovno "
-"konfiguriranje va�e mre�ne/Internet veze.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Dobro Do�li u �arobnjak za pode�avanje mre�e\n"
-"\n"
-"Sada �emo konfigurirati va�u internet/mre�nu vezu.\n"
-"Ukoliko ne �elite koristiti auto detekciju, odselektirajte kvadrati� s "
-"potvrdom.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Izaberite profil za konfiguriranje"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Koristi auto detekciju"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Otkrivanje ure�aja..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normalna modemska veza"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detektiran na portu %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN veza"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detektirano %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL veza"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detektirano na me�usklopu %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kablovska veza"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "detektirana kablovska veza"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN veza"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet kartica(e) prona�ene"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Izaberite vezu koju �elite podesiti"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Odabrali ste vi�e na�ina za spajanje na Internet.\n"
-"Molimo izaberite koji �elite koristiti.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet veza"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Da li �elite pokreniti va�u vezu kod svakog podizanja (boot) sustava ?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Mre�ne postavke"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Mre�a treba biti ponovno pokrenuta"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Problem se pojavio prilikom ponovnog pokretanja mre�e: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"�estitam, mre�na i internet konfiguracija je zavr�ena.\n"
-"\n"
-"Konfiguracija �e sada biti primjenjena na va�em sustavu.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Nakon �to je to napravljeno, preporu�amo da ponovno pokrenete va�e X\n"
-"okru�je kako bi izbjegli probleme prilikom promjene imena ra�unala."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"UPOZORENJE: Ovaj ure�aj je bio prethodno konfiguriran za spajanje na "
-"Internet.\n"
-"Jednostavno prihvatite ovaj ure�aj konfiguriran.\n"
-"Promjena polja ni�e �e prepisati ovu konfiguraciju."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Molim unesite IP postavke za ovaj stroj.\n"
-"Svaka stavka treba biti unesena kao  IP adresa odvojena\n"
-"to�kama (npr. 1.2.3.4)"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Pode�avam mre�ni ure�aj %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (upravlja�ki program %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmaska"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatski IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa treba biti oblika 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Molim unesite ime ra�unala.\n"
-"Ime ra�unala treba biti puno ime ra�unala,\n"
-"primjerice mojeracunalo.odjel.domena.hr.\n"
-"Tako�er unesite IP adresu gateway ra�unala ako gateway postoji"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS poslu�itelj"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway ure�aj"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Postava proxy-a"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Prati id mre�ne kartice (korisno za laptope)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy treba biti http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy treba biti ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Postava Interneta"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Da li �elite poku�ati spajanje na Internet ?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testiram va�u vezu..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sustav je sada spojen na Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Zbog sigurnosnih razloga, biti �e sada odspojen."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"�ini se kako sustav nije spojen na internet.\n"
-"Probajte ponovno podesiti va�u vezu."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Postava Veze"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Molim ispunite ili provjerite vrijednost doljnjeg polja"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ kartice"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memorija kartice (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO kartice"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 kartice"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 kartice"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Va� osobni telefonski broj"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Ime ISP pru�atelja (npr. provider.hr)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telef. broj pru�atelja"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Pru�ateljev DNS 1 (opciono)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Pru�ateljev DNS 2 (opciono)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Odaberite va�u zemlju"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Na�in biranja"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Brzina"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Vrijeme �ekanja veze (u sek)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Korisni�ko ime"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Korisni�ka Lozinka"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montiranje nije uspjelo: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Pro�irene particije nisu podr�ane na ovoj platformi"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Imate rupu u svojoj particijskoj tablici me�utim ja je ne mogu iskoristiti.\n"
-"Jedino rje�enje je da pomaknete va�u primarnu particiju kako bi rupa bila\n"
-"odmah do pro�irenih particija."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Vra�anje iz datoteke %s nije uspjelo: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Lo�a backup datoteka"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Gre�ka prilikom pisanja u datoteku %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Ne�to lo�e se de�ava sa va�im pogonom. \n"
-"Test za provjeru integriteta podataka je neuspje�an. \n"
-"To zna�i da pisanje bilo �ega na va� disk rezultira slu�ajnim sme�em"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "potrebno"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "va�no"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "vrlo lijepo"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "lijepo"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "mo�da"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nova Generacija"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Ispi�i, Bez Reda"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokalni pisa�"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Udaljeni pisa�"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Pisa� na udaljenom CUPS poslu�itelju"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Pisa� na udaljenom lpd poslu�itelju"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Mre�ni pisa� (TCP/socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Pisa� na SMB/Windows 95/98/NT poslu�itelju"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Pisa� na NetWare poslu�itelju"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Unesite URI pisa�a"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Proslijedi (pipe) na komandu"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Nepoznati model"
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Lokalni pisa�"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Udaljeni pisa�"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Gre�ka prilikom pisanja u datoteku %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Raw printer (Bez upravlja�kog programa)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(na ovom ra�unalu)"
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP CUPS poslu�itelja"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Uobi�ajeno)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Odaberite vezu pisa�a"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kako je pisa� povezan?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Pisa�e na udaljenom CUPS poslu�itelju ne morate konfigurirati\n"
-"ovdje; ti pisa�i �e biti automatski prona�eni. Molim,\n"
-"izaberite \"Pisa� na udaljenom CUPS poslu�itelju\" u tom slu�aju."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "LAN postavke"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Udaljeni CUPS poslu�itelj"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa treba izgledati poput 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Broj porta bi trebao biti cjelobrojni broj!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP CUPS poslu�itelja"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatska CUPS konfiguracija"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Otkrivanje ure�aja ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Isku�aj portove"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Nema pisa�a"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Lokalni pisa�"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Automatski pronalazak pisa�a"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatski pronalazak pisa�a"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Koristi auto detekciju"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Ime udaljenog pisa�a"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "detektirano %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Unesite URI pisa�a"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Lokalni pisa�"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Izaberite serijski port na kojemu se nalazi modem."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Unesite URI pisa�a"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Postava Interneta"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instaliram paket %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instaliram paket %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "�itam bazu pisa�a ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "�itam bazu pisa�a ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Postavke udaljenog lpd pisa�a"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Ukoliko �elite koristiti udaljeni lpd red morate unijeti\n"
-"ime ispisnog poslu�itelja te ime reda na poslu�itelju\n"
-"na koji �elite ispisivati."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Udaljeno ime ra�unala"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Ime udaljenog pisa�a"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Nedostaje ime ra�unala udaljenog pisa�a!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Nedostaje ime udaljenog pisa�a!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Postavke SMB (Windows 9x/NT) pisa�a"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Za ispis na SMB pisa�, trebate navesti\n"
-"ime SMB doma�ina (Primjetite da mo�e biti razli�it od TCP/IP imena "
-"ra�unala)\n"
-"i vjerojatno IP adresu poslu�itelja pisa�a, kao i\n"
-"ime dijeljenog resursa za pisa� kojem �elite pristupiti i bilo koje\n"
-"primjenjivo korisni�ko ime, lozinku ili informacije o radnoj grupi."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB poslu�itelj"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP SMB poslu�itelja"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Ime sharea"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Radna grupa"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Ime poslu�itelja ili IP poslu�itelja mora biti naveden!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Ime dijeljenog samba resursa nedostaje!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Postavke NetWare pisa�a"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Za ispis na NetWare pisa�, trebate navesti\n"
-"NetWare ime poslu�itelja pisa�a (Primjetite da mo�e biti razli�it od\n"
-"njegovog TCP/IP imena ra�unala!) kao i ime ispisnog reda za pia� koji\n"
-"�elite pristupiti kao i primjenjivo korisni�ko ime i lozinku."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Ispisni poslu�itelj"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Ime reda pisa�a"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Ime NCP poslu�itelja nedostaje!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Nedostaje ime NCP reda!"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Opcije socket pisa�a"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Za ispis na socket pisa�, trebate navesti \n"
-"ime poslu�itelja od printera te opciono broj porta."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Ime ra�unala od pisa�a"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Nedostaje ime ra�unala od pisa�a!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI Ure�aja pisa�a"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Ispravan URI mora biti une�en!"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Svaki pisa� treba ime (na primjer lp).\n"
-"Polja opisa i lokacije ne mora biti \n"
-"popunjeno. To su komentari za korisnike."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Ime pisa�a"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Opis"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lokacija"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Pripremam bazu pisa�a ..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Ime udaljenog pisa�a"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Ime udaljenog pisa�a"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Izabir modela pisa�a"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Kakav model pisa�a imate?"
-
-#: ../../printerdrake.pm_.c:1141
-#, fuzzy
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Molim, provjerite da li je Printerdrake \n"
-"automatski prona�ao va� model pisa�a\n"
-"ispravno. Prona�ite ispravan model u\n"
-"popisu ukoliko pokaziva� pokazuje a\n"
-"krivi model ili na \"Raw pisa�\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter konfiguracija"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet konfiguracija"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opcija %s mora biti cijeli broj!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opcija %s mora biti broj!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opcija %s je izvan dosega!<"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Da li �elite postaviti ovaj pisa� (\"%s\")\n"
-"kao podrazumijevani pisa�?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testne stranice"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Bez testnih stranica"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Ispi�i"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standardna testna stranica"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternativna testna stranica (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternativna testna stranica (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Foto testna stranica"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Ispisujem probnu stranicu(e)..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Ispisujem probnu stranicu(e)..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testna/e stranica/e su poslane na pisa�.\n"
-"Mo�e potrajati neko vrijeme dok ispisivanje ne zapo�ne.\n"
-"Status ispisa:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Probna stranica(e) poslana je na pisa�.\n"
-"Ponekad je potrebno par sekundi prije nego pisa� po�ne s ispisom.\n"
-"Da li sve radi kako treba?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Nema pisa�a"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Zatvori"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Onemogu�ujem mre�u"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Onemogu�ujem mre�u"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Postavke pisa�a"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "�itam CUPS bazu upravlja�kih programa..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Postava Interneta"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Ime pisa�a mo�e sadr�avati samo slova, brojeve i podvlaku"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Pisa� \"%s\" ve� postoji,\n"
-"da li zaista �elite prepisati njegovu konfiguraciju?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Novo ime pisa�a"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "�itam CUPS bazu upravlja�kih programa..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Postavke pisa�a"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Pokre�em va�u vezu..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Podesi mre�u"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Niste podesili monitor"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Pode�avam mre�u"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Koji ispisni sustav �elite koristiti?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Visok"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoidan"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Koji ispisni sustav �elite koristiti?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Odaberite vezu pisa�a"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Koji ispisni sustav �elite koristiti?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Podesi pisa�"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instaliram paket %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Postavke pisa�a"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "�itam CUPS bazu upravlja�kih programa..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Podesi pisa�"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Da li �elite podesiti pisa�?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Pisac"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Podesi mre�u"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normalni mod"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Da li �elite isku�ati postavu ?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Postavke modema"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Da li �elite isku�ati postavu ?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Dijeljenje Internet Veze"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Veza pisa�a"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Ispisujem probnu stranicu(e)..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Da li �elite isku�ati postavu ?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Postavke udaljenog pisa�a"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "�itam CUPS bazu upravlja�kih programa..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Podrazumijevani pisa�"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Da li �elite ponovno pokrenuti mre�u?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "�itam CUPS bazu upravlja�kih programa..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Postava proxy-a"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Dobro do�li u pomo�ni program za konfiguriranje proxy-a.\n"
-"\n"
-"Ovdje �ete mo�i postaviti va� http i ftp proxi-e\n"
-"sa ili bez logina i lozinke\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Molimo popunite http proxy informacije\n"
-"Molimo ostavite prazno ukoliko ne �elite http proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url treba po�eti sa 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Broj porta bi trebao biti numeri�ki"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Molimo unesite ftp proxy informacije\n"
-"Ostavite prazno ukoliko ne �elite ftp proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url treba po�eti sa 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Molimo unesite proxy login i lozinku ukoliko postoje.\n"
-"Ostavite prazno ako ne �elite login/lozinku"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "lozinka"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ponovno unesite lozinku"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Lozinke se ne podudaraju. Poku�ajte ponovno!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne mogu dodati particiju na _formatirani_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ne mogu pisati u datoteku %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid nije uspio"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid nije uspio (mo�da niste instalirali raidtools alate?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nema dovoljno particija za RAID nivo %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Pokreni ALSA (Naprednu Linux Zvu�nu Arhitekturu) zvu�ni sustav"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron periodno zakazivanje komandi"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd slu�i za monitoriranje statusa i baterije i njegovo logiranje putem "
-"syslog-a.\n"
-"Tako�er mo�e biti kori�ten za ga�enje ra�unala kada je baterija slaba."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Pokre�e komande zakazane sa at komandom u specifirano vrijeme kada\n"
-"je at pokrenut, i pokre�e batch komande kada je prosje�na zauzetost dovoljno "
-"niska."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardan UNIX program koji pokre�e korisni�ki definirane programe\n"
-"u periodi�no zakazana vremena. vixie cron dodaje veliki broj korisnih "
-"funkcija obi�nom UNIX cron-u, uklju�uju�i bolju sigurnost i ve�u snagu "
-"konfiguracijskih opcija."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM dodaje podr�ku za mi�u tekst baziranim Linux aplikacijama kao �to je\n"
-"Midnight Commander. Tako�er pru�a mi� baziranim konzolama odre�i-i-zalijepi "
-"operacije,\n"
-"i uklju�uje podr�ku za isko�ive menije u konzoli."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake pokre�e isprobavanje hardware-a, i opciono konfigurira\n"
-"novi/promjenjeni hardware."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache je World Wide Web poslu�itelj. Koristi se za poslu�ivanje HTML\n"
-"dokumenata i CGI skripti."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver demon (naj�e��e zvan inetd) pokre�e \n"
-"razne druge internet servise po potrebi. Odgovoran je za pokretanje \n"
-"mnogo servisa, uklju�uju�i telnet, ftp, rsh, i rlogin. Isklju�ivanje inetd-"
-"a\n"
-"onemogu�uje sve servise za koje je zadu�en."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pokre�e paketno filtriranje za Linux kernel 2.2 serije, za postavljanje\n"
-"vatrozida za za�titu va�eg ra�unala od mre�nih napada."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ovaj paket u�itava odabranu tastaturnu mapu kao �to je postavljenu u\n"
-"/etc/sysconfig/keyboard. Ona se mo�e odabrati koriste�i kbdconfig alat.\n"
-"Trebali biste ostaviti ovo uklju�eno za ve�inu ra�unala."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatsko regeneriranje kernel header-a u /boot za\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatska detekcija i konfiguracija hardware-a pri podizanju."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf �e ponekada urediti izvr�avanje raznih radnji\n"
-"pri samom podizanju kako bi odr�ao sustavsku konfiguraciju."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je daemon za ispis koji je potreban od lpr-a kako bi radio ispravno.\n"
-"On je pojednostavljeno poslu�itelj koji �alje ispisne poslove pisa�u(ima)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtualni Poslu�itelj, koristi se za pravljenje visoko raspolo�ivog\n"
-"poslu�itelja visokih performansi."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je Domain Name Server (DNS) poslu�itelj koji se upotrebljava\n"
-"za razlu�ivanje imena ra�unala u IP adrese."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montira i Demontira sve Mre�ne datote�ne sustave (NFS), SMB (Lan\n"
-"Manager/Windows), i NCP (NetWare) to�ke montiranja."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivira/Deaktivira sva pode�ena mre�na su�elja prilikom pokretanja\n"
-"sustava."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka putem TCP/IP mre�a.\n"
-"Ovaj servis pru�a NFS poslu�iteljsku funkcionalnost, koji se konfigurira\n"
-"putem /etc/exports datoteke."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka putem TCP/IP mre�a.\n"
-"Ovaj servis pru�a funkcionalnost NFS datote�nog zaklju�avanja."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatski uklju�uje numlock tipku u konzoli i\n"
-"XFree-u pri podizanju."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podr�ava OKI 4w i kompaktibilne win pisa�e."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA podr�ka je obi�no za podr�avanje stvari poput ethernet i\n"
-"modema u laptopima. Ona ne�e biti pokrenuta ukoliko nije tako\n"
-" konfigurirana zato je sigurno pokrenuti ju iako na instaliranom\n"
-" ra�unalu ne treba."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper ure�uje RPC vezama, koje su kori�tene u protokolima\n"
-"poput NFS-a ili NIS-a. Portmap poslu�itelj mora biti pokrenut na ra�unalima\n"
-"koji su poslu�itelji za protokole koji se slu�e RPC mehanizmima."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix je Mail Transport Agent, koji je program koji\n"
-"�alje mail-ove sa jedne ma�ine na drugu."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Sprema i vra�a sustavsku entropiju za ve�u kvalitetu generiranja\n"
-"slu�ajnih brojeva."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Dodjeljuje raw ure�aje (kao �to su hard disk\n"
-"particije), za uporabu u aplikacijama kao �to su Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed daemon omogu�ava automatsku IP ruter tablicu koja se obnavlja\n"
-"putem RIP protokola. Dok se RIP naj�ire koristi na malim mre�ama, vi�e "
-"kompleksniji\n"
-"ruting protokoli su potrebni za kompleksnije mre�e."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Rstat protokol omogu�ava korisnicima na mre�i da dohvate\n"
-"mjerljive performanse za svako ra�unalo koje je na mre�i."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Rusers protokol omogu�ava korisnicima na mre�i da identificira tko je\n"
-"prijavljen na drugim ra�unalima koja odgovaraju."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Rwho protokol omogu�ava udaljenim korisnicima da dobiju popis svih\n"
-"korisnika prijavljenih na ra�unalo na kojima je pokrenut rwho (sli�no finger-"
-"u)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Pokreni zvu�ni sustav na va�em ra�unalu"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je resurs kojega koriste mnogi demoni kako bi logirali poruke\n"
-"u razli�ite sustavske log datoteke. Dobra je ideja uvijek imati pokrenuti "
-"syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "U�itava upravlja�ke programe za va�e usb ure�aje."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Pokre�e X Pismovni Poslu�itelj (ovo je nu�no za XFree da se pokrene)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izaberite koji servisi trebaju biti startani automatski kod boot-a"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Ispisujem"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Sistemski mod"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Postavke udaljenog lpd pisa�a"
-
-# ../../share/compssUsers
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Baze"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ure�aj"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "pokre�em"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zaustavljen"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servisi i daemoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nema dodatnih informacija\n"
-"o ovom servisu, �alim."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Pri pokretanju"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Status:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Protokol za ostatak svijeta"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Internet pristup"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedija - Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Razvoj"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Kontrolni Centar"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Mre�ni me�usklop"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB poslu�itelj"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Igre"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Ekspert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instaliram paket %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ne mogu pro�itati va�u particijsku tablicu, previ�e je uni�tena za mene :(\n"
-"Poku�ati �u sa brisanjem lo�ih particija"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Gre�ka"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Postava nakon instalacije"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Postava Stila Podizanja"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "�estitke!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instaliraj"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Dodaj korisnika"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatiram loopback datoteku %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Lo�a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Lo�a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Lo�a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Odabir paketa"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Ukloni zapis"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Ukloni Windowse(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Korisni�ko ime"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Molimo istestirajte mi�a."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Molim poku�ajte ponovo"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Molim poku�ajte ponovo"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "ponovno unesite lozinku"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN veza"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Odaberite vezu pisa�a"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Molim izaberite raspored tipkovnice."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Molim kliknite na particiju"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Lo�a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Molimo istestirajte mi�a."
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Lo�a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Mre�ni me�usklop"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Korisni�ko ime"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Molim izaberite jezik koji �elite koristiti."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Otkrivanje hard diskova"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Korisni�ko ime"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Kota�i�"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Kota�i�"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Postavke modula:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Mre�ne postavke"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Podesi datote�ne sustave"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcije"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Izaberite serijski port na kojemu se nalazi modem."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Mre�ne postavke"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Lo�a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Molim izaberite koju vrstu mi�a koristite."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Lo�a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Molim izaberite koju vrstu mi�a koristite."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Ostali"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instaliraj sustav"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Prilago�eno"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Prija�nje"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Status:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Lo�a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Prilago�eno"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Slijede�e ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Izabir instaliranih paketa"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Molim izaberite jezik koji �elite koristiti."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Molim izaberite jezik koji �elite koristiti."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Molim izaberite jezik koji �elite koristiti."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Lo�a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Lo�a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Lo�a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Otkrivanje ure�aja..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Molimo istestirajte mi�a."
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Mre�ne postavke"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Mre�ne postavke"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "LAN postavke"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "LAN postavke"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Podesi datote�ne sustave"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalacija %s-a nije uspjela. Prijavljena je slijede�a gre�ska:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "ne mogu prona�i niti jednu mre�nu karticu"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Gotov"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Pripremam instalaciju"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "ograni�i"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatiraj particije"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "LAN postavke"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "To�ka montiranja"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Izaberite particije koje �elite formatirati"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Ured"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Prekini"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Pisac"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instaliraj sustav"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Odaberite datoteku"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Postavke udaljenog pisa�a"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Init poruka"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Nema mre�nog adaptera na va�em sustavu!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instaliraj"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Nema mre�nog adaptera na va�em sustavu!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Izlaz iz instalacije"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Dijeljenje Internet Veze"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Dijeljenje veze prema internetu je trenutno omogu�eno"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Postavljanje dijeljenja veze prema internetu je ve� napravljeno.\n"
-"Trenutno je omogu�eno.\n"
-"\n"
-"�to �elite napraviti?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "onemogu�i"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "odustani"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ponovno postavi"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Onemogu�ujem poslu�itelje..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Dijeljenje veze prema Internetu je trenutno onemogu�eno."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Dijeljenje veze prema Internetu je trenutno onemogu�eno"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Postavljanje dijeljenja veze prema Internetu je ve� napravljeno.\n"
-"Trenutno je onemogu�eno.\n"
-"\n"
-"�to �elite napraviti?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "omogu�i"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Omogu�ujem poslu�itelje..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Dijeljenje veze prema internetu je trenutno omogu�eno."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Va�e ra�unalo mo�e biti konfigurirano da dijeli vlastitu Internet vezu.\n"
-"Sa tom zna�ajkom, druga ra�unala na va�oj lokalnoj mre�i mogu koristiti "
-"Internet vezu ovog ra�unala.\n"
-"\n"
-"Upozorenje: trebati �ete primjenjeni Mre�ni Ure�aj za postavljanje lokalne "
-"mre�e (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Me�usklop %s (koristi modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Me�usklop %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nema mre�nog adaptera na va�em sustavu!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nije prona�en niti jedan mre�ni adapter na va�em sustavu. Molimo pokrenite "
-"hardware-ski konfiguracijski alat."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Mre�ni me�usklop"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Postoji samo jedan konfigurirani mre�ni adapter na va�em sustavu:\n"
-"\n"
-"%s\n"
-"\n"
-"Postaviti �u lokalnu mre�u (LAN) sa tim adapterom."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Molimo odaberite koji mre�ni adapter �e biti povezan na va�u lokalnu mre�u."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Niste podesili monitor"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Postava Stila Podizanja"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Postavke modema"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP CUPS poslu�itelja"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencijalni LAN adresni konflikt je prona�en u trenutnoj konfiguraciji %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Detektirana je vatrozidna konfiguracija!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Upozorenje! Postoje�a vatrozidna konfiguracija je prona�ena. Morati �ete "
-"ru�no popraviti neke dijelove nakon instalacije."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Pode�avam..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Pode�avam skriptove, instaliram softver, pokre�em poslu�itelje..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problem prilikom instaliranja paketa %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Sve je konfigurirano.\n"
-"Sada mo�ete dijeliti va�u internet vezu sa drugim ra�unalima na va�oj "
-"lokalnoj mre�i, koriste�i automatsku mre�nu konfiguraciju (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Postavljanje je ve� ura�eno, ali je trenutno onemogu�eno."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Postavljanje je ve� ura�eno, ali je trenutno omogu�eno."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Dijeljenje veze prema internetu nije bilo konfigurirano."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Postavke dijeljenja internet veze"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Dobro do�li u alat za konfiguriranje dijeljenja Internet veze!\n"
-"\n"
-"%s\n"
-"\n"
-"Kliknite na Postavke ukoliko �elite pokreniti �arobnjak za postavljanja."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Mre�ne postavke (%d adaptera)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Obri�i profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil za obrisati:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Novi profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Ime ra�unala: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internet pristup"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tip:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Me�usklop:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Pode�avanje Internet Pristupa..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN postavke"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Upravlja�ki program"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Me�usklop"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Podesi lokalnu mre�u..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "�arobnjak..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Primjeni"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Molimo pri�ekajte... Primjenjujem konfiguraciju"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Povezan"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nije povezan"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Pove�i..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Odspoji..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemate niti jedan konfigurirani me�usklop.\n"
-"Konfigurirajte ga prvo klikanjem na 'Postavljanje'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN postavke"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Boot protokol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Pokrenuto pri podizanju"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Aktivno"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Aktivno"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nemate niti jednu internet vezu.\n"
-"Napravite jednu klikanjem na 'Podesi'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Postava Internet veze"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Postava Internet veze"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tip veze: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet kartica"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Pode�avam sigurnosni nivo"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolni Centar"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Izaberite alat koje �elite koristiti"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanadska (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandska"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "serijski"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uporaba: keyboarddrake [--exper] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Molim izaberite raspored tipkovnice."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Da li �elite da BackSpace vrati Delete u konzoli?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Promjeni Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Molimo ubacite Instalacijski Cd-Rom u va� pogon i pritisnite U redu kada ste "
-"zavr�ili.\n"
-"Ukoliko ga nemate, pritisnite Odustani kako bi izbjegli �ivu nadogradnju."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ne mogu pokrenuti �ivu nadogradnju !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-#, fuzzy
-msgid "/File/_New"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../standalone/logdrake_.c:102
-#, fuzzy
-msgid "<control>N"
-msgstr "<control>Q"
-
-#: ../../standalone/logdrake_.c:103
-#, fuzzy
-msgid "/File/_Open"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../standalone/logdrake_.c:103
-#, fuzzy
-msgid "<control>O"
-msgstr "<control>Q"
-
-#: ../../standalone/logdrake_.c:104
-#, fuzzy
-msgid "/File/_Save"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../standalone/logdrake_.c:104
-#, fuzzy
-msgid "<control>S"
-msgstr "<control>Q"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-#, fuzzy
-msgid "/File/-"
-msgstr "/_Datoteka"
-
-#: ../../standalone/logdrake_.c:108
-#, fuzzy
-msgid "/_Options"
-msgstr "Opcije"
-
-#: ../../standalone/logdrake_.c:109
-#, fuzzy
-msgid "/Options/Test"
-msgstr "Opcije"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Korisni�ko ime"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Testne stranice"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "Procjenjujem"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-#, fuzzy
-msgid "Choose file"
-msgstr "Izaberite datoteku"
-
-#: ../../standalone/logdrake_.c:201
-#, fuzzy
-msgid "Calendar"
-msgstr "Standardno"
-
-#: ../../standalone/logdrake_.c:211
-#, fuzzy
-msgid "Content of the file"
-msgstr "Spoji se na Internet"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, fuzzy, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Molimo pri�ekajte, Pripremam instalaciju"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Postava Interneta"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Dobro do�li u pomo�ni program za konfiguriranje proxy-a.\n"
-"\n"
-"Ovdje �ete mo�i postaviti va� http i ftp proxi-e\n"
-"sa ili bez logina i lozinke\n"
-
-# ../../share/compssUsers
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache i Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Izlaz"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "ure�aj"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatiram"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Postava Interneta"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Molim izaberite koju vrstu mi�a koristite."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "niti jedan serial_usb nije prona�en\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emuliranje tre�e tipke?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Odaberite grafi�ku karticu"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Boot ure�aj"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Vatrozidne postave"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Vatrozidne postave"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Vatrozidi\n"
-"\n"
-"Ve� ste postavili vatrozid.\n"
-"Kliknite na Podesi za promjenu ili brisanje vatrozida"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Vatrozidi\n"
-"\n"
-"Kliknite na Podesi za postavljanje standardnog vatrozida"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Odaberite jezik"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Odaberite razred instalacije"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Otkrivanje hard diskova"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Podesi mi�"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Odaberite tipkovnicu"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sigurnost"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Podesi datote�ne sustave"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatiraj particije"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Izabir instaliranih paketa"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instaliraj sustav"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Dodaj korisnika"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Podesi mre�u"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Pode�avanje servisa"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instaliraj bootloader"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Napravi boot disketu"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Podesi X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instaliraj sustav"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Izlaz iz instalacije"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall pode�avanje\n"
-"\n"
-"Ovo pode�ava osobni vatrozid za ovo Mandrake Linux ra�unalo.\n"
-"Za sna�no primjenjena vatrozidna rje�enja, molimo pogledajte\n"
-"specijaliziranu MandrakeSecurity Firewall distribuciju."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Sada �emo vas pitati nekoliko pitanja o servisima koje �elite dozvoliti\n"
-"Internetu da se spoji. Molimo razmislite pa�ljivo o tim\n"
-"pitanjima, jer sigurnost va�eg ra�unala je va�na.\n"
-"\n"
-"Molimo, ukoliko ne koristite trenutno jedan od tih servisa, postavite\n"
-"vatrozid. Mo�ete promjeniti ovu konfiguraciju bilo kad za�elite\n"
-"pokretanjem ponovno ove aplikacije!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut web poslu�itelj na ovom ra�unalu kojeg treba cijeli\n"
-"Internet vidjeti? Ukoliko trebate web poslu�itelj kojemu �e biti pristupan\n"
-"samo sa ovog ra�unala, mo�ete sigurno odgovoriti NE ovdje.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut imenski poslu�itelj na ovom ra�unalu? Ukoliko niste "
-"postavili jedan\n"
-"da daje IP i informacije o zoni cijelom Internet-u, molimo\n"
-"odgovorite ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Da li �elite omogu�iti dolaze�e Secure Shell (ssh) veze? To je\n"
-"je telnet zamjena �to mo�ete koristiti za prijavljivanje. Ako sada "
-"koristite\n"
-"telnet, trebali biste definitivno se prebaciti na ssh. telnet nije\n"
-"enkriptiran -- tako da neki napada�i mogu ukrasti va�e lozinke ako ga "
-"koristite\n"
-"ssh je enkriptiran i nedozvoljava prislu�kivanje (sniffanje)."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Da li �elite dopustiti dolaze�e telnet veze?\n"
-"Ovo je u�asno nesigurno, kao �to smo objasnili na prethodnom zaslonu. Mi\n"
-"jako preporu�amo odgovaranjem Ne ovdje i kori�tenjem ssh-a umjesto\n"
-"telnet-a.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Da li imate pokrenut FTP poslu�itelj ovdje koji treba biti dostupan\n"
-"Internet-u? Ukoliko da, jako preporu�amo da ga koristite samo za\n"
-"anonimni prijenos. Svaka lozinka prenesena FTP-om mo�e biti ukradena od\n"
-"nekih napada�a, jer FTP tako�er ne koristi enkripciju za prijenos lozinki.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut mail poslu�itelj ovdje? Ako �aljete va�e \n"
-"poruke kroz pine, mutt ili neki drugi tekst-bazirani mail klijent,\n"
-"vjerojatno ga koristite. Ako ne, trebali biste ga odijeliti vatrozidom.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut POP ili IMAP poslu�itelj ovdje? Ovo mo�e\n"
-"koristiti za poslu�ivanje ne-web-baziranih mail ra�una za osobe preko\n"
-"ovog ra�unala.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"�ini se da imate pokrenut 2.2 kernel. Ukoliko je va�a IP\n"
-"adresa automatski postavljena u va�em domu ili uredu\n"
-"(dinami�ki dodjeljenja), moramo to dozvoliti. Da\n"
-"li je to slu�aj?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Da li se va�e ra�unalo vremenski sinkronizira sa drugim ra�unalom?\n"
-"Ve�inom, ovo se koristi kod srednje-velikih Unix/Linux organizacija\n"
-"za sinkronizaciju vremena za zapisivanje/logiranje i sli�no. Ukoliko\n"
-"niste dio ve�eg ureda ili niste �uli za ovo, vjerojatno\n"
-"ne."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Pode�avanje zavr�eno. Mo�emo li zapisati ove promjene na disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ne mogu otvoriti %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ne mogu otvoriti %s za pisanje: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Vatrozidne postave"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Molimo pri�ekajte, Pripremam instalaciju"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Mre�no ra�unalo (klijent)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS poslu�itelj, SMB poslu�itelj, Proxy poslu�itelj, SSH poslu�itelj"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Ured"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Alati za va� Palm Pilot ili va� Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Vatrozid/Ruter"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Ime Domene i Mre�ni Informacijki Poslu�itelj (NIS)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Uredski programi: tekst procesori (kword, abiword), tabli�ni kalkulatori "
-"(kspread, gnumeric), pdf preglednici, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio-namjenjeni alati: mp3 ili midi svira�i, mikseri, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knjige i Howto-i o Linux-u i slobodnom software-u"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedija - Video"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Skup alata za mail, news, web, datote�ni prijenos, i razgovor"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Baze"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ili MySQL poslu�itelj baza"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Alati za lako pode�avanje va�eg ra�unala"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedija - Zvuk"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Pomo�ni programi"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacija"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konzolni Alati"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix mail poslu�itelj, Inn news poslu�itelj"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet stanica"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedijska stanica"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN postavke"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Vi�e grafi�kih radnih okru�ja (Gnome, IceWM)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Radno Okru�je, osnovno grafi�ko okru�je sa kolekcijom pripadaju�ih alata"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafi�ko Okru�je"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache i Pro-ftpd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Alati za pravljenje i pr�enje CD-a"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Uredska radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Poslu�itelj"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafi�ki programi poput Gimp-a"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C i C++ razvojne biblioteke, programi i uklju�uju�e datoteke"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Mre�ni ra�unalni poslu�itelj"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Igra�ka radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video playeri i ure�iva�i"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedija - Grafika"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zabavni programi: arkade, plo�e, strategije, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Pribor alata za �itanje i slanje mail-a i news-a (pine, mutt, tin..) i za "
-"pregled Web-a"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhiviranje, emulatori, pra�enje"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Osobne financije"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafi�ka okru�ja sa korisni�ki prijateljskim skupom aplikacija i alatima za "
-"radno okru�je"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klijenti za razne protokole uklju�uju�i ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet gateway"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Zvu�ni i video svira�ki/ure�iva�ki programi"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Druga grafi�ka radna okru�ja"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Ure�iva�i, ljuske, datote�ni alati, terminali"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programi za ure�ivanje va�ih financija, poput gnucash-a"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Osobni informacijski menad�ment"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedija - CD pr�enje"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Znanstvena radna stanica"
diff --git a/perl-install/share/po/hu.po b/perl-install/share/po/hu.po
deleted file mode 100644
index fd44cc152..000000000
--- a/perl-install/share/po/hu.po
+++ /dev/null
@@ -1,12496 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 2000 Mandrakesoft
-# KOVACS Emese Alexandra <emese@itp.hu>, 2000, 2001
-# Kultsar Kadosa Atilla <kadi@kadi.emg.hu>, 2000
-# Takacs Sandor <taki@dfmk.hu>, 2000
-# Timar Andras <atimar@itp.hu>, 2000
-# Sari Gabor <saga@tux.hu>, 2000
-# Tamas Szanto <tszanto@mol.hu>, 2001
-# Arpad Biro <biro_arpad@yahoo.com>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-13 01:27GMT+1\n"
-"Last-Translator: Arpad Biro <biro_arpad@yahoo.com>\n"
-"Language-Team: Hungarian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "A k�perny�k egym�st�l f�ggetlen be�ll�t�sa"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "A Xinerama kiterjeszt�s haszn�lata"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Csak a(z) \"%s\" (%s) k�rtya be�ll�t�sa"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "A t�bbk�perny�s m�d be�ll�t�sa"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"A grafikus k�rtya lehet�v� teszi t�bb k�perny� haszn�lat�t.\n"
-"Mit szeretne tenni?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafikus k�rtya"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "V�lasszon egy grafikus k�rty�t"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "V�lasszon egy X-kiszolg�l�t"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X-kiszolg�l�"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "V�lasszon egy X-meghajt�t"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X-meghajt�"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Melyik XFree-t szeretn� haszn�lni?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A k�rtya t�mogat hardveres 3D-s gyors�t�st, de csak az XFree %s verzi�ban.\n"
-"Az XFree %s is haszn�lhat�; elk�pzelhet�, hogy abban jobb a 2D-s t�mogat�s."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "A k�rtya t�mogat hardveres 3D-s gyors�t�st az XFree %s verzi�val."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s hardveres 3D-s gyors�t�ssal"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"A k�rtya t�mogat hardveres 3D-s gyors�t�st az XFree %s verzi�ban,\n"
-"DE EZ K�S�RLETI JELLEG�, HASZN�LATA AK�R A G�P LEFAGY�S�HOZ IS VEZETHET!"
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s K�S�RLETI JELLEG� hardveres 3D-s gyors�t�ssal"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A k�rtya t�mogat hardveres 3D-s gyors�t�st, de csak az XFree %s verzi�ban.\n"
-"EZ K�S�RLETI JELLEG�; HASZN�LATA AK�R A G�P LEFAGY�S�HOZ IS VEZETHET.\n"
-"Az XFree %s verzi� is haszn�lhat�; elk�pzelhet�, hogy ebben jobb a 2D-s\n"
-"t�mogat�s."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (telep�t�si meghajt�program)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree-be�ll�t�sok"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "V�lassza ki a grafikus k�rty�n tal�lhat� mem�ria mennyis�g�t"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Az X be�ll�t�sai"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "A monitor kiv�laszt�sa"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"A k�t legfontosabb param�ter a f�gg�leges friss�t�s frekvenci�ja (a teljes\n"
-"k�perny� friss�t�si gyorsas�ga) �s a v�zszintes friss�t�s frekvenci�ja (a\n"
-"v�zszintes sorok megjelen�t�s�nek gyorsas�ga).\n"
-"\n"
-"NAGYON FONTOS, hogy egyik se l�pje t�l a monitorhoz enged�lyezett\n"
-"fels� hat�r�rt�ket, mert ilyenkor esetleg a monitor megs�r�lhet.\n"
-"Ha nem ismeri a monitor jellemz�it, v�lasszon egy biztons�gosan\n"
-"alacsony �rt�ket!"
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "V�zszintes friss�t�s"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "F�gg�leges friss�t�s"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "A monitor nincs be�ll�tva"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "A grafikus k�rtya m�g nincs be�ll�tva"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "A felbont�sok m�g nincsenek be�ll�tva"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Ki szeretn� pr�b�lni a be�ll�t�sokat?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Vigy�zat! A grafikus k�rtya kipr�b�l�sa esetleg a g�p lefagy�s�hoz is "
-"vezethet!"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "A be�ll�t�sok kipr�b�l�sa"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"v�ltoztasson meg n�h�ny param�tert"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Hiba t�rt�nt:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Kil�p�s %d m�sodperc m�lva"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Megfelel� ez a be�ll�t�s?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Hiba t�rt�nt, v�ltoztasson meg n�h�ny param�tert"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Felbont�s"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "V�lassza ki a felbont�st �s a sz�nm�lys�get"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikus k�rtya: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Egy�b"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "OK"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Szak�rt�i m�d"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mindent mutasson"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Felbont�sok"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Billenty�zetkioszt�s: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Az eg�r t�pusa: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Az egeret kezel� eszk�z: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "A v�zsz. friss�t�si frekvencia: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "A f�gg. friss�t�si frekvencia: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "A grafikus k�rtya: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "A grafikus k�rtya azonos�t�ja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "A k�rtya mem�ri�ja: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Sz�nm�lys�g: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Felbont�s: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86-meghajt�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Az X be�ll�t�s�nak el�k�sz�t�se"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Mit szeretne tenni?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "A monitor m�dos�t�sa"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "A grafikus k�rtya m�dos�t�sa"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Az X be�ll�t�sainak m�dos�t�sa"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "A felbont�s m�dos�t�sa"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Az adatok megjelen�t�se"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "M�g egy pr�ba"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Kil�p�s"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Meg szeretn� tartani a m�dos�t�sokat?\n"
-"A jelenlegi be�ll�t�s:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Grafikus m�d� bejelentkez�s"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Be�ll�that�, hogy rendszerind�t�skor az X automatikusan elinduljon.\n"
-"Szeretne grafikus m�d� bejelentkez�st?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-"A m�dos�t�sok csak a(z) %s programba val� k�vetkez� bejelentkez�skor l�pnek "
-"�rv�nybe"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Jelentkezzen ki, majd nyomja meg a Ctrl+Alt+BackSpace billenty�kombin�ci�t"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 sz�n (8-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ezer sz�n (15-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ezer sz�n (16-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milli� sz�n (24-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milli�rd sz�n (32-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB vagy t�bb"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480, 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600, 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-kompatibilis, 1024x768, 87 Hz, v�ltottsoros (nincs 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768, 87 Hz, v�ltottsoros, 800x600 56 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600, 60 Hz, 640x480 72 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Nem v�ltottsoros SVGA, 1024x768, 60 Hz, 800x600 72 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Magas frekvenci�j� SVGA, 1024x768, 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multisync monitor, amely k�pes 1280x1024-re 60 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multisync monitor, amely k�pes 1280x1024-re 74 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multisync monitor, amely k�pes 1280x1024-re 76 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Olyan monitor, amely k�pes 1600x1200-ra 70 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Olyan monitor, amely k�pes 1600x1200-ra 76 Hz-en"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "A rendszerind�t�si part�ci� els� szektora"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "A lemezmeghajt� legels� szektora (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "A SILO telep�t�se"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Hov� ker�lj�n a rendszerind�t� program (bootloader)?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "A LILO/GRUB telep�t�se"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO, sz�veges men�vel"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO, grafikus men�vel"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "GRUB"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Ind�t�s DOS-b�l vagy Windows-b�l (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Rendszerind�t�si be�ll�t�sok"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "A haszn�lni k�v�nt rendszerbet�lt�"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "A rendszerind�t� program telep�t�se"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Rendszerind�t�si eszk�z"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nem m�k�dik r�gi BIOS-okkal)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "K�perny�m�d"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "V�rakoz�si id� az alap�rtelmezett rendszer bet�lt�se el�tt"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Jelsz�"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Jelsz� (m�g egyszer)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "A parancssorban �tadhat� param�terek korl�toz�sa"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "korl�toz�s"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "A /tmp t�rl�se minden �jraindul�sn�l"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "A RAM m�rete, ha sz�ks�ges (%d MB-ot detekt�ltam)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "T�bb profil enged�lyez�se"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "A fizikai mem�ria m�rete MB-ban"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"\"A parancssorban �tadhat� param�terek korl�toz�sa\" be�ll�t�snak jelsz� "
-"n�lk�l nincs �rtelme"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Pr�b�lja meg �jra"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "A jelszavak nem egyeznek"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Ind�t�si �zenet"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "K�sleltet�s Open Firmware-n�l"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "V�rakoz�si id� rendszerind�t�skor"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "CD-r�l t�rt�nhet rendszerind�t�s?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "OF-r�l t�rt�nhet rendszerind�t�s?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Az alap�rtelmezett op. rendszer?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Azt a lehet�s�get v�lasztotta, hogy a rendszerbet�lt�t egy part�ci�ra "
-"telep�ti.\n"
-"Ez arra utal, hogy m�r van rendszerbet�lt� (p�ld�ul: System Commander) azon "
-"a\n"
-"merevlemezen, amelyr�l a rendszer ind�t�sa t�rt�nik.\n"
-"\n"
-"Melyik meghajt�r�l v�gzi a rendszer ind�t�s�t?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Itt l�that�k a jelenlegi bejegyz�sek.\n"
-"�j bejegyz�sek vehet�k fel, illetve m�dos�that�k a meglev�k."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Hozz�ad�s"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "K�sz"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "M�dos�t�s"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Milyen bejegyz�st szeretne felvenni?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Egy�b op. rendszer (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Egy�b op. rendszer (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Egy�b op. rendszer (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Ind�t�f�jl"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Gy�k�r"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Hozz�f�z�s"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Kezdeti RAM-diszk"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "�rhat�-olvashat�"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "T�bla"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nem biztons�gos"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "C�mke"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Alap�rtelmez�s"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "A RAM-diszk m�rete"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Bejegyz�s elt�vol�t�sa"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "A c�mke nem lehet �res"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Meg kell adni egy kernelf�jlt"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Meg kell adni egy gy�k�rpart�ci�t"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "M�r van ilyen nev� c�mke"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s csatol�t tal�ltam"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Van m�g m�sik is?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Van valamilyen %s csatol�?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nem"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Igen"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "A hardverjellemz�k megjelen�t�se"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Meghajt�program telep�t�se ehhez a(z) %s-k�rty�hoz: %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(%s modul)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Melyik %s-meghajt�programot pr�b�ljam meg?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Bizonyos esetekben a(z) %s meghajt�programnak tov�bbi param�terekre van\n"
-"sz�ks�ge a helyes m�k�d�shez. Szeretne tov�bbi param�tereket megadni a\n"
-"meghajt�programnak, vagy hagyja, hogy az lek�rdezze a sz�ks�ges\n"
-"inform�ci�kat? Bizonyos k�r�lm�nyek eset�n az automatikus detekt�l�s\n"
-"a g�p lefagy�s�hoz vezethet, de komolyabb k�rt nem okozhat."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatikus detekt�l�s"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Param�terek megad�sa"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Most megadhat�k a(z) \"%s\" modul param�terei.\n"
-"A c�meket \"0x\" el�taggal kell megadni, p�ld�ul: \"0x123\"."
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Itt lehet megadni a(z) %s modul param�tereit\n"
-"a k�vetkez� form�tumban: \"n�v1=�rt�k1 n�v2=�rt�k2 ...\".\n"
-"P�ld�ul: \"io=0x300 irq=7\""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "A modul param�terei:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"A(z) %s modul bet�lt�se nem siker�lt.\n"
-"Megpr�b�lja a bet�lt�st m�s param�terekkel?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "hozz�f�r�s az X-es programokhoz"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "hozz�f�r�s az RPM-eszk�z�kh�z"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "\"su\" enged�lyez�se"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "hozz�f�r�s az adminisztr�ci�s f�jlokhoz"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(m�r fel van v�ve: %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ez a jelsz� t�l egyszer�"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Adjon meg egy felhaszn�l�nevet"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"A felhaszn�l�n�v csak a k�vetkez�ket tartalmazhatja: kisbet�k, sz�mok, \"-\" "
-"�s \"_\""
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "M�r l�tezik ilyen felhaszn�l�n�v"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Felhaszn�l� hozz�ad�sa"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Adjon meg egy felhaszn�l�nevet\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "N�v elfogad�sa"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Val�di n�v"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Felhaszn�l�n�v"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Parancs�rtelmez�"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatikus bejelentkez�s"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Be�ll�that�, hogy ind�t�skor egy felhaszn�l� automatikusan bejelentkezzen.\n"
-"Szeretn� haszn�lni ezt a lehet�s�get?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Adja meg az alap�rtelmezett felhaszn�l�nevet:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "V�lassza ki a haszn�lni k�v�nt ablakkezel�t:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "V�lasszon nyelvet."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "V�laszthat m�s nyelveket is, ezek a telep�t�s ut�n lesznek el�rhet�k."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Mind"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Az �sszes felhaszn�l� enged�lyez�se"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Egy�ni"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Nincs megoszt�s"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "A(z) %s csomagot telep�teni kell. Szeretn� telep�teni?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-"Export�l�s NFS-sel vagy Samb�val v�gezhet�. Melyiket k�v�nja haszn�lni?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Hi�nyzik a(z) \"%s\" nev� k�telez� csomag"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Szeretn� enged�lyezni a felhaszn�l�k sz�m�ra azt, hogy a saj�t "
-"k�nyvt�rukban\n"
-"lev� k�nyvt�rakat export�ljanak?\n"
-"Ha ez enged�lyezve van, akkor a felhaszn�l�k a Konquerorban �s a "
-"Nautilusban\n"
-"a \"Megoszt�s\" funkci�val v�gezhetnek export�l�st.\n"
-"\n"
-"Az \"Egy�ni\" opci� haszn�lat�val felhaszn�l�nk�nti be�ll�t�s lehets�ges.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "M�gsem"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "UserDrake ind�t�sa"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"A felhaszn�l�nk�nti megoszt�s a \"fileshare\" csoportot haszn�lja.\n"
-"A UserDrake programmal lehet felhaszn�l�t felvenni ebbe a csoportba."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "�dv�zlet a cracker-eknek"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Gyenge"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Szabv�nyos"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Magas"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Magasabb"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoi�s"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ezt a szintet csak k�r�ltekint�ssel haszn�lja.\n"
-"Egyszer�bb� teszi a rendszer haszn�lat�t, de �gy az sebezhet�bb is lesz:\n"
-"ne v�lassza ezt a szintet, ha a g�p h�l�zatba van k�tve, vagy az "
-"internethez\n"
-"csatlakozik. A hozz�f�r�s nincs jelsz�val v�dve."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"A jelszavak be vannak kapcsolva, de h�l�zatra kapcsol�d� g�p eset�n\n"
-"ez a konfigur�ci� m�g mindig nem aj�nlott."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ez a szabv�nyos biztons�gi szint, amely az internetre (kliensk�nt) "
-"csatlakoz� g�pek eset�n javasolt."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"M�r vannak bizonyos megszor�t�sok, �s t�bb automatikus ellen�rz�s fut "
-"�jszak�nk�nt."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Ezzel a biztons�gi szinttel m�r haszn�lhatja a g�p�t kiszolg�l�k�nt.\n"
-"Ez a biztons�gi szint el�g magas ahhoz, hogy a rendszer sok, h�l�zaton\n"
-"kereszt�l csatlakoz� klienst szolg�ljon ki. Ha a g�p az interneten csak "
-"kliensk�nt van jelen, akkor �rdemesebb egy alacsonyabb szintet v�lasztani."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Az el�z� szinten alapul, de itt a rendszer teljesen z�rt.\n"
-"Ez a legbiztons�gosabb szint."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "V�lassza ki a biztons�gi szintet"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Biztons�gi szint"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "A libsafe haszn�lata kiszolg�l�khoz"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"K�nyvt�r, amely v�delmet ny�jt a puffert�lcsordul�sos �s a form�tumsztringes "
-"t�mad�sok ellen."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Udvozoljuk a(z) %s rendszerinditoban!\n"
-"\n"
-"Valasszon egy operacios rendszert a listabol, vagy varjon\n"
-"%d masodpercig, amig az alapertelmezett elindul.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Udvozoljuk a GRUB rendszerindito programban!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "A(z) %c es a(z) %c billentyukkel lehet a bejegyzesek kozott lepegetni."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Nyomja meg az Enter billentyut a kijelolt rendszer inditasahoz, az 'e'-t "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "az inditasi parancsok modositasahoz, vagy a 'c'-t a parancssorhoz."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "A kijelolt operacios rendszer %d masodperc mulva elindul."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nincs el�g hely a /boot part�ci�n"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Asztal"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start men�"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "A rendszerind�t� program nem tehet� %s part�ci�ra\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "m�g nem haszn�lhat� a seg�ts�g\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "A rendszerind�t�s be�ll�t�sai"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_F�jl"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/F�jl/Ki_l�p�s"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "�j st�lus� kategoriz�l� monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "�j st�lus� monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Hagyom�nyos monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Hagyom�nyos GTK+-monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Az Aurora ind�t�sa rendszerind�t�skor"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB m�d"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot m�d"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Jelenleg a(z) %s rendszerind�t� programot haszn�lja.\n"
-"Kattintson a Be�ll�t�s gombra a be�ll�t�svar�zsl� elind�t�s�hoz."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Be�ll�t�s"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Rendszer-m�d"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Az X induljon el rendszerind�t�skor"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne legyen automatikus bejelentkez�s"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Legyen automatikus bejelentkez�s (felhaszn�l�n�v, grafikus k�rnyezet)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Az /etc/inittab f�jlt nem siker�lt olvas�sra megnyitni: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d perc"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 perc"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d m�sodperc"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Part�cion�l�s el�tt nem k�sz�thet�k k�perny�felv�telek"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "A k�perny�felv�telek a telep�t�s ut�n itt lesznek el�rhet�k: %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Franciaorsz�g"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgium"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Cseh K�zt�rsas�g"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "N�metorsz�g"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "G�r�gorsz�g"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norv�gia"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Sv�dorsz�g"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Hollandia"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Olaszorsz�g"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Ausztria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Amerikai Egyes�lt �llamok"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "El�sz�r k�sz�tsen biztons�gi ment�st az adatokr�l"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Olvassa el figyelmesen!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ha az aboot-ot fogja haszn�lni, el�sz�r ellen�rizze, hogy maradt-e el�g\n"
-"hely (legal�bb 2048 szektor) a lemez elej�n"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Hiba"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Var�zsl�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "V�lasszon"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Egy nagy FAT part�ci� van\n"
-"(ez gyakran egy Microsoft DOS/Windows part�ci�).\n"
-"C�lszer� el�sz�r �tm�retezni a part�ci�t\n"
-"(kattintson a part�ci�ra, majd az \"�tm�retez�s\" gombra)."
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Kattintson egy part�ci�ra"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "R�szletek"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Napl�zott f�jlrendszer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Lapoz�ter�let (swap)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "�res"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Egy�b"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "F�jlrendszer-t�pusok:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "L�trehoz�s"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "T�pus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Haszn�lja ink�bb ezt: \"%s\""
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "T�rl�s"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Haszn�lja el�sz�r a \"Lev�laszt�s\"-t"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"A(z) %s part�ci� t�pus�nak m�dos�t�sa ut�n a part�ci�n lev� adatok elvesznek"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "V�lasszon egy part�ci�t"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "V�lasszon egy m�sik part�ci�t"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Kil�p�s"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "�tv�lt�s szak�rt�i m�dba"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "�tv�lt�s norm�l m�dba"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Visszavon�s"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Folytassam a m�veletet?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Kil�p�s ment�s n�lk�l"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Ki akar l�pni a programb�l a part�ci�s t�bla ment�se n�lk�l?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "El szeretn� menteni az /etc/fstab f�jlban v�grehajtott m�dos�t�sokat?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automatikus helyfoglal�s"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Teljes t�rl�s"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Merevlemez-jellemz�k"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Mindegyik els�dleges part�ci� foglalt"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Nem hozhat� l�tre t�bb part�ci�"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Tov�bbi part�ci�k l�trehoz�s�hoz t�r�lni kell egyet (hogy egy kiterjesztett "
-"part�ci�t l�tre lehessen hozni)"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "A part�ci�s t�bla ment�se"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "A part�ci�s t�bla visszat�lt�se"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "A part�ci�s t�bla helyre�ll�t�sa"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "A part�ci�s t�bla �jrat�lt�se"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Cser�lhet� lemez automatikus csatlakoztat�sa"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "F�jlv�laszt�s"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"A part�ci�s t�bla k�t p�ld�ny�nak m�rete elt�r!\n"
-"Folytassam a m�veletet?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Figyelmeztet�s"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Helyezzen be egy floppylemezt a meghajt�ba!\n"
-"A lemezen tal�lhat� adatok elvesznek"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Megpr�b�lom helyrehozni a part�ci�s t�bl�t"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "R�szletes inform�ci�"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Csatlakoztat�si pont"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Be�ll�t�sok"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "�tm�retez�s"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "�thelyez�s"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Form�z�s"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Csatlakoztat�s"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Hozz�ad�s RAID-hez"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Hozz�ad�s LVM-hez"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Lev�laszt�s"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Elt�vol�t�s RAID-b�l"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Elt�vol�t�s LVM-b�l"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAID m�dos�t�sa"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Loopback-hez haszn�lva"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "�j part�ci� l�trehoz�sa"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Kezd�szektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "M�ret (MB): "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "A f�jlrendszer t�pusa: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Csatlakoztat�si pont: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Be�ll�t�sok: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "El szeretn� t�vol�tani a loopback f�jlt?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "A part�ci�t�pus megv�ltoztat�sa"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Melyik f�jlrendszert szeretn�?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Konvert�l�s Ext2-r�l Ext3-ra"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Hov� szeretn� csatlakoztatni a(z) %s loopback f�jlt?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hov� szeretn� csatlakoztatni a(z) %s eszk�zt?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nem lehet megsz�ntetni a csatlakoztat�si pontot, mert ez egy loopback\n"
-"part�ci�. El�sz�r t�vol�tsa el a loopback-et."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "A FAT f�jlrendszer jellemz�inek kisz�m�t�sa"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "�tm�retez�s"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ezt a part�ci�t nem lehet �tm�retezni"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "K�sz�tsen biztons�gi ment�st err�l a part�ci�r�l"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"A(z) %s part�ci� �tm�retez�sekor a part�ci�n tal�lhat� adatok elvesznek"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Adja meg az �j m�retet"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Az �j m�ret (MB-ban): "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Melyik lemezre szeretn� �thelyezni?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Szektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Melyik szektorra szeretn� �thelyezni?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "�thelyez�s"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Part�ci� �thelyez�se..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "V�lassza ki azt a RAID-et, amelyikhez hozz� szeretn� adni a lemezt"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "�j"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "V�lassza ki azt az LVM-et, amelyhez hozz� szeretn� adni a lemezt"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Az LVM neve?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ez a part�ci� nem haszn�lhat� loopback-hez"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "A loopback f�jl neve: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Adjon meg egy f�jlnevet"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Ez a f�jl m�r egy m�sik loopback-hez van rendelve, v�lasszon egy m�sikat"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "A f�jl m�r l�tezik, haszn�ljam?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Csatlakoztat�si (mount) opci�k"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Vegyes"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "eszk�z"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "szint"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "szeletm�ret"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Vigy�zat! Ez a m�velet adatveszt�st okozhat."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Milyen t�pus� part�cion�l�st szeretne?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Nem hozhatom l�tre a /boot-ot ennyire t�vol a merevlemez elej�t�l (cilinder\n"
-"> 1024). Ha a LILO-t haszn�lja, akkor az nem fog m�k�dni, ha pedig nem\n"
-"haszn�lja a LILO-t, akkor nincs sz�ks�g a /boot-ra."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Az a part�ci�, amelyet gy�k�rpart�ci�nak (/) jel�lt ki, fizikailag az 1024.\n"
-"cilinder ut�n tal�lhat�, �s a rendszerben nincs /boot part�ci�.\n"
-"Ha a LILO-t szeretn� haszn�lni, hozzon l�tre egy /boot part�ci�t."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Szoftveres RAID part�ci�t v�lasztott ki gy�k�rpart�ci�nak (/).\n"
-"Egyik rendszerind�t� program sem tudja ezt kezelni /boot part�ci� n�lk�l,\n"
-"ez�rt mindenk�ppen hozzon l�tre egy /boot part�ci�t."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "A(z) \"%s\" meghajt� part�ci�t�bl�j�nak ment�se k�vetkezik!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "A v�ltoz�sok csak a rendszer �jraind�t�sakor l�pnek �letbe"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "A(z) %s part�ci� form�z�sakor a part�ci�n tal�lhat� adatok elvesznek!"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Form�z�s"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "A(z) %s loopback f�jl form�z�sa"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "A(z) %s part�ci� form�z�sa"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "F�jlok elrejt�se"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "F�jlok �thelyez�se az �j part�ci�ra"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"A(z) %s k�nyvt�r m�r tartalmaz adatot\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "F�jlok �thelyez�se az �j part�ci�ra"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "%s m�sol�sa"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "%s elt�vol�t�sa"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "a(z) %s part�ci� jelenleg \"%s\"-k�nt ismert"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Eszk�z: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-meghajt� bet�jele: %s (ez csak egy tipp)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "T�pus: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "N�v: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Kezd�szektor: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "M�ret: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s szektor"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "A(z) %d. cilindert�l a(z) %d.-ig\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Form�zva\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nincs form�zva\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Csatlakoztatva\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback f�jl(ok):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Az alap�rtelmezett ind�t�si part�ci�\n"
-"    (a DOS-nak, nem a LILO-nak)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "%s. szint\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "A szelet m�rete: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID lemezek: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "A loopback f�jl neve: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Ez a part�ci� val�sz�n�leg\n"
-"meghajt�knak van fenntartva,\n"
-"ne m�dos�tson rajta.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ez egy speci�lis rendszerind�t�si\n"
-"part�ci� (hogy t�bbf�le oper�ci�s\n"
-"rendszert lehessen ind�tani).\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "M�ret: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilinder, %s fej, %s szektor\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Inform�ci�: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-lemezek: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "A part�ci�s t�bla t�pusa: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "busz: %d, id: %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Be�ll�t�sok: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "F�jlrendszer-titkos�t�si kulcs"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "V�lasszon f�jlrendszer-titkos�t�si kulcsot"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Ez a titkos�t�si kulcs t�l egyszer� (legal�bb %d karakter hossz�nak kell "
-"lennie)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "A titkos�t�si kulcsok nem egyeznek"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Titkos�t�si kulcs"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Titkos�t�si kulcs (m�g egyszer)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "A t�pus megv�ltoztat�sa"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Kattintson egy m�di�ra"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Kiszolg�l�k keres�se"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s form�z�s sikertelen a(z) %s eszk�z�n"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nem tudom, hogyan kell megform�zni a(z) %s eszk�zt %s t�pus�ra"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "a(z) %s part�ci� ide t�rt�n� csatol�sa sikertelen: %s"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "Az fsck kil�pett \"%d\" hibak�ddal vagy \"%d\" szign�llal"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "hiba t�rt�nt a(z) %s lev�laszt�sakor: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "egyszer�"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "/usr-rel"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "kiszolg�l�"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Nem lehet JFS-t haszn�lni 16 MB-n�l kisebb part�ci�n"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Nem lehet ReiserFS-t haszn�lni 32 MB-n�l kisebb part�ci�n"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "A csatlakoztat�si pontoknak /-rel kell kezd�dni"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "M�r van egy part�ci� amelynek %s a csatlakoztat�si pontja\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nem haszn�lhat� LVM logikai k�tet a(z) %s csatlakoztat�si ponthoz"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ennek a k�nyvt�rnak a gy�k�r-f�jlrendszeren bel�l kell maradnia"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Val�di f�jlrendszert (Ext2, ReiserFS) kell haszn�lni enn�l a csatlakoztat�si "
-"pontn�l\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Titkos�tott f�jlrendszer nem haszn�lhat� ehhez a csatol�si ponthoz: %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nincs el�g szabad ter�let az automatikus helyfoglal�shoz"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nincs mit tenni"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Hiba t�rt�nt %s �r�sra val� megnyit�s�n�l: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Hiba t�rt�nt - nincs olyan meghajt�, amelyen �j f�jlrendszert lehetne "
-"l�trehozni. Ellen�rizze a g�pben tal�lhat� eszk�z�ket."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Egyetlen part�ci� sincs!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"A Linux t�bbfelhaszn�l�s rendszer; ez azt jelenti, hogy minden\n"
-"felhaszn�l�nak lehetnek p�ld�ul k�l�n be�ll�t�sai �s saj�t f�jljai.\n"
-"Tov�bbi inform�ci�kat a Felhaszn�l�i K�zik�nyvb�l lehet megtudni.\n"
-"A \"root\" nev� felhaszn�l�t�l (ez az azonos�t� a rendszergazd�t jel�li)\n"
-"elt�r�en az itt felvett felhaszn�l�knak csak a saj�t f�jljaikat �s a saj�t\n"
-"be�ll�t�saikat lesz joguk m�dos�tani. Javasolt legal�bb egy \"norm�l\"\n"
-"felhaszn�l�t felvenni az �n saj�t haszn�lat�ra. Ezen norm�l felhaszn�l�i\n"
-"azonos�t�val �rdemes elv�gezni az olyan tev�kenys�geket, amelyek nem\n"
-"ig�nyelnek rendszergazdai jogosults�got. B�r nagyon praktikus minden\n"
-"alkalommal rendszergazdak�nt jelentkezni be, ez nagyon vesz�lyes is.\n"
-"Rendszergazdak�nt haszn�lva a legapr�bb hiba hat�s�ra is meghib�sodhat\n"
-"a rendszer. Ha norm�l felhaszn�l�k�nt k�vet el hib�t, akkor esetleg\n"
-"elvesz�t bizonyos adatokat, de a rendszert nem teheti t�nkre.\n"
-"\n"
-"El�sz�r is meg kell adnia a val�di nev�t. Ez term�szetesen nem k�telez�;\n"
-"b�rmit be lehet �rni n�vk�nt. A telep�t� a megadott n�v els� szav�t\n"
-"aj�nlja fel a \"Felhaszn�l�n�v\" mez�ben. Ez ut�bbi az a n�v, amellyel\n"
-"az adott felhaszn�l� be tud majd jelentkezni a rendszerbe. A felk�n�lt n�v\n"
-"m�dos�that�. A felhaszn�l�n�v megad�sa ut�n meg kell adni az ahhoz tartoz�\n"
-"k�v�nt jelsz�t. Egy norm�l felhaszn�l� jelszava biztons�gi szempontb�l nem\n"
-"annyira kritikus, mint a rendszergazd��; ez viszont nem ok arra, hogy\n"
-"fel�letesen legyen kezelve - v�g�l is az �n f�jljair�l van sz�.\n"
-"\n"
-"A \"N�v elfogad�sa\" gombbal vehet� fel �jabb felhaszn�l�. B�rmennyi\n"
-"felhaszn�l� l�trehozhat�. Vegyen fel egy-egy felhaszn�l�nevet mindazok\n"
-"sz�m�ra, akik a g�pet haszn�lni fogj�k. Amikor v�gzett a felhaszn�l�nevek\n"
-"l�trehoz�s�val, kattintson a \"K�sz\" gombra.\n"
-"\n"
-"Ha a \"Speci�lis\" gombra kattint, m�dos�thatja az adott felhaszn�l�\n"
-"alap�rtelmezett parancs�rtelmez�j�t (alap�rtelmez�s szerint ez a \"bash\")."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Fent l�that�k a lemezen tal�lt, m�r l�tez� linuxos part�ci�k.\n"
-"A var�zsl� javaslatai �ltal�ban elfogadhat�k, �ltal�nos c�l� telep�t�sn�l\n"
-"�ltal�ban megfelelnek. Ha megv�ltoztatja a be�ll�t�sokat, mindenk�ppen\n"
-"jel�lje ki a gy�k�rpart�ci�t (\"/\"). Ne v�lassza t�l kicsire, mert akkor\n"
-"nem lesz el�g hely a szoftverek telep�t�s�hez. Ha k�l�n part�ci�ra\n"
-"szeretn� helyezni a felhaszn�l�i adatokat, jel�lj�n ki egy k�l�n \"/home\"\n"
-"part�ci�t (ez csak akkor lehets�ges, ha legal�bb k�t Linux part�ci�\n"
-"l�tezik).\n"
-"\n"
-"A part�ci�k list�j�nak mez�i: \"n�v\", \"kapacit�s\".\n"
-"\n"
-"A \"n�v\" k�pz�si szab�lya: \"a merevlemez t�pusa\", \"a lemez\n"
-"azonos�t�ja\", \"a part�ci� azonos�t�ja\" (p�ld�ul \"hda1\").\n"
-"\n"
-"\"A merevlemez t�pusa\" \"hd\", ha a lemez IDE-csatol�s, �s \"sd\",\n"
-"ha SCSI-csatol�s.\n"
-"\n"
-"\"A lemez azonos�t�ja\" egy bet� a \"hd\" illetve az \"sd\" ut�n.\n"
-"IDE-csatol�s merevlemezek eset�n:\n"
-"\n"
-"  - \"a\" jelent�se: \"els� (master) meghajt� az els� IDE-vez�rl�n\"\n"
-"\n"
-"  - \"b\" jelent�se: \"m�sodik (slave) meghajt� az els� IDE-vez�rl�n\"\n"
-"\n"
-"  - \"c\" jelent�se: \"els� meghajt� a m�sodik IDE-vez�rl�n\"\n"
-"\n"
-"  - \"d\" jelent�se: \"m�sodik meghajt� a m�sodik IDE-vez�rl�n\"\n"
-"\n"
-"SCSI-csatol�s lemezekn�l az \"a\" jelent�se: \"a legalacsonyabb\n"
-"SCSI-azonos�t�\", \"b\" jelent�se: \"a m�sodik legalacsonyabb\n"
-"SCSI-azonos�t�\", ..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"A Mandrake Linux telep�t�anyag t�bb CD-n helyezkedik el. Ha egy "
-"kiv�lasztott\n"
-"csomag egy m�sik CD-n tal�lhat�, akkor a DrakX (a telep�t�) kiadja az\n"
-"aktu�lis CD-t, �s megk�ri �nt, hogy helyezzen be egy m�sikat."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Most meg kell adnia, mely programokat k�v�nja telep�teni a rendszer�re.\n"
-"T�bb ezer program l�tezik Mandrake Linuxhoz; term�szetesen �nnek nem\n"
-"sz�ks�ges mindet ismernie.\n"
-"\n"
-"Ha szabv�nyos telep�t�st v�gez CD-r�l, akkor el�sz�r meg kell adnia, mely\n"
-"CD-kkel rendelkezik (csak a szak�rt�i m�dra igaz). N�zze �t a CD-k c�meit,\n"
-"�s jel�lje be az el�rhet� CD-ket a list�ban. Ha k�szen �ll a folytat�sra,\n"
-"kattintson az \"OK\" gombra.\n"
-"\n"
-"A csomagok a g�p lehets�ges felhaszn�l�si ter�letei szerint csoportokba\n"
-"vannak rendezve. Maguk a csoportok n�gy szakaszba vannak sorolva:\n"
-"\n"
-"  - \"Munka�llom�s\": ha munka�llom�sk�nt tervezi haszn�lni a g�pet, akkor\n"
-"v�lasszon az ennek megfelel� csoportok k�z�l.\n"
-"\n"
-"  - \"Fejleszt�s\": ha a g�p programoz�sra is lesz haszn�lva, akkor\n"
-"v�lassza ki a k�v�nt csoportokat.\n"
-"\n"
-"  - \"Kiszolg�l�\": ha a g�p kiszolg�l�k�nt lesz haszn�lva, itt lehet�s�g\n"
-"van annak kiv�laszt�s�ra, hogy a gyakrabban haszn�lt szolg�ltat�sok k�z�l\n"
-"melyeket k�v�nja telep�teni a g�pre.\n"
-"\n"
-"  - \"Grafikus k�rnyezet\": itt v�laszthat� ki a k�v�nt grafikus k�rnyezet.\n"
-"Ha grafikus munka�llom�st szeretne, akkor legal�bb egyet ki kell\n"
-"v�lasztani.\n"
-"\n"
-"Ha az eg�rkurzort egy csoport neve f�l� viszi, akkor megjelenik egy r�vid\n"
-"magyar�zat az adott csoportr�l. Ha telep�t�skor az �sszes csoport\n"
-"kijel�l�s�t megsz�nteti (friss�t�sre ez nem vonatkozik), akkor a telep�t�\n"
-"v�laszt�si lehet�s�get fog felk�n�lni a minim�lis telep�t�sre vonatkoz�an.\n"
-"A k�vetkez� lehet�s�gek v�laszthat�k:\n"
-"\n"
-"  - \"X-szel egy�tt\": grafikus rendszer a lehet� legkevesebb csomag\n"
-"telep�t�s�vel.\n"
-"\n"
-"  - \"Alapvet� dokument�ci�val\": az alaprendszer az alapvet� programokkal\n"
-"�s azok dokument�ci�j�val. Megfelel p�ld�ul kiszolg�l� telep�t�s�hez.\n"
-"\n"
-"  - \"Val�ban minim�lis telep�t�s\": a lehet� legkisebb telep�t�s;\n"
-"parancssorb�l haszn�lhat� Linux rendszer. K�r�lbel�l 65 megab�jt m�ret�\n"
-"telep�t�s.\n"
-"\n"
-"Bejel�lheti a \"Csomagok egyedi kiv�laszt�sa\" opci�t; ez akkor hasznos,\n"
-"ha �n ismeri a felk�n�lt csomagokat, illetve ha teljes m�rt�kben\n"
-"ellen�rizni k�v�nja, mi lesz a g�pre feltelep�tve.\n"
-"\n"
-"Ha a telep�t�st \"Friss�t�s\" �zemm�dban ind�totta el, akkor megsz�ntetheti\n"
-"ak�r az �sszes csoport kijel�l�s�t is, hogy elker�lje �j programok\n"
-"telep�t�s�t. Ez k�l�n�sen akkor lehet hasznos, ha egy meglev� rendszert\n"
-"k�v�n helyre�ll�tani vagy friss�teni."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"V�g�l, att�l f�gg�en, hogy k�v�nt-e egyedi csomagkiv�laszt�st haszn�lni,\n"
-"megjelenik egy fa, amely az �sszes telep�thet� programcsomagot tartalmazza\n"
-"csoportokba �s alcsoportokba kategoriz�lva. A fa b�ng�sz�se k�zben\n"
-"nem csak csomagokat jel�lhet ki, hanem eg�sz csoportokat illetve\n"
-"alcsoportokat is.\n"
-"\n"
-"Amikor kiv�laszt egy csomagot a f�ban, a jobb oldalon megjelenik egy le�r�s\n"
-"az adott csomagr�l. Ha v�gzett a kijel�l�sekkel, kattintson a \"Telep�t�s\"\n"
-"gombra; ennek hat�s�ra megkezd�dik a programok telep�t�se. A g�p\n"
-"sebess�g�t�l illetve a telep�tend� csomagok sz�m�t�l f�gg�en a folyamat\n"
-"jelent�s id�t vehet ig�nybe. A telep�t� megjelen�t egy becsl�st arra\n"
-"vonatkoz�an, hogy mennyi id� van h�tra a telep�t�s befejezt�ig.\n"
-"\n"
-"Ha kiszolg�l�csomagok is ki lettek v�lasztva - ak�r k�zvetlen�l, ak�r\n"
-"bizonyos csoportok tagjak�nt -, a telep�t� meger�s�t�st k�r �nt�l arra\n"
-"vonatkoz�an, hogy val�ban telep�teni k�v�nja-e azon kiszolg�l�szoftvereket.\n"
-"A Mandrake Linux rendszerben alap�rtelmez�sben az �sszes feltelep�tett\n"
-"kiszolg�l�program elind�t�sra ker�l a rendszer indul�sakor. M�g ha azok\n"
-"biztons�gosak is illetve nem rendelkeznek ismert probl�m�kkal, akkor is\n"
-"el�fordulhat, hogy ut�bb biztons�gi probl�m�k mer�lnek fel vel�k\n"
-"kapcsolatban. Ha nem tudja, hogy egy bizonyos - telep�t�sre kijel�lt -\n"
-"szolg�ltat�snak mi a feladata illetve mi�rt ker�l telep�t�sre, akkor\n"
-"kattintson a \"Nem\" gombra. Ha az \"Igen\" gombra kattint, akkor a\n"
-"felsorolt szolg�ltat�sok telep�t�sre ker�lnek, �s alap�rtelmez�s szerint\n"
-"automatikusan elind�t�sra ker�lnek majd.\n"
-"\n"
-"\"Az automatikusan kijel�lt csomagok mutat�sa\" opci� bejel�l�s�nek\n"
-"hat�s�ra a telep�t� jelezni fogja, ha automatikusan jel�l ki csomagokat\n"
-"telep�t�sre. Ilyesmi az�rt fordul el�, mert bizonyos f�gg�s�gek miatt\n"
-"sz�ks�g lehet tov�bbi csomagok telep�t�s�re is.\n"
-"\n"
-"A lista alatt lev�, floppylemezt �br�zol� ikon lehet�v� teszi egy kor�bbi\n"
-"telep�t�s sor�n elmentett csomaglista bet�lt�s�t. Ezen ikonra kattintva a\n"
-"telep�t� megk�ri �nt, hogy tegyen be egy floppyt, amely egy kor�bbi\n"
-"telep�t�s v�g�n k�sz�lt. Ha szeretn� megtudni, hogyan lehet ilyen floppyt\n"
-"k�sz�teni, tekintse meg a telep�t�s utols� l�p�s�ben szerepl� tippet."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Itt be�ll�thatja az internetkapcsolatot illetve a h�l�zati kapcsolatot.\n"
-"Ha szeretn� a g�p�t az internetre vagy egy helyi h�l�zatra csatlakoztatni,\n"
-"akkor kattintson az \"OK\" gombra. A telep�t� felder�ti a h�l�zati\n"
-"eszk�z�ket �s a modemeket. Ha a felder�t�s nem j�r sikerrel, akkor a\n"
-"k�vetkez� alkalommal kapcsolja ki az \"Automatikus detekt�l�s\" opci�t. Ha\n"
-"nem k�v�nja be�ll�tani a h�l�zatot, vagy k�s�bb k�v�nja azt be�ll�tani,\n"
-"akkor kattintson a \"M�gsem\" gombra.\n"
-"\n"
-"A lehets�ges kapcsolatok: hagyom�nyos modem, ISDN-modem, ADSL-kapcsolat,\n"
-"k�belmodem, egyszer� helyi h�l�zati (LAN) kapcsolat (Ethernet).\n"
-"\n"
-"A lehets�ges be�ll�t�sok itt nem ker�lnek r�szletez�sre. A sz�ks�ges\n"
-"param�tereket az internet-szolg�ltat�t�l illetve a\n"
-"rendszeradminisztr�tort�l tudhatja meg.\n"
-"\n"
-"A be�ll�t�sokkal kapcsolatban a felhaszn�l�i k�zik�nyv\n"
-"internetkapcsolatokkal foglalkoz� fejezet�b�l szerezhet tov�bbi\n"
-"inform�ci�kat. A kapcsolat be�ll�t�s�t nem sz�ks�ges a telep�t�s k�zben\n"
-"elv�gezni; a k�zik�nyv le�rja, hogyan lehet azt megtenni egy feltelep�tett\n"
-"rendszeren.\n"
-"\n"
-"Ha a h�l�zat be�ll�t�s�t a telep�t�s ut�n k�v�nja elv�gezni, illetve ha\n"
-"befejezte a h�l�zati kapcsolat be�ll�t�s�t, akkor kattintson a \"M�gsem\"\n"
-"gombra."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Most lehet kijel�lni az automatikusan elind�tand� szolg�ltat�sokat.\n"
-"\n"
-"Itt l�that� a jelenleg telep�tett �sszes szolg�ltat�s list�ja.\n"
-"Vizsg�lja meg a list�t alaposan, �s t�r�lje a kijel�l�st azok mell�l,\n"
-"amelyek automatikus elind�t�s�ra nincs sz�ks�g.\n"
-"\n"
-"Egy szolg�ltat�s kiv�laszt�sakor mindig megjelenik a hozz� tartoz� r�vid\n"
-"le�r�s. Ha nem tudja biztosan, hogy a szolg�ltat�sra sz�ks�g van-e vagy\n"
-"sem, akkor ne v�ltoztassa meg az alap�rtelmezett ind�t�si m�dot.\n"
-"\n"
-"Gondosan j�rjon el, ha a g�pet kiszolg�l�nak fogja haszn�lni,\n"
-"ne ind�tson el egy olyan szolg�ltat�st sem automatikusan, amelyre nincs\n"
-"sz�ks�g. A feleslegesen elind�tott szolg�ltat�sok biztons�gi kock�zatot\n"
-"jelentenek. Csak a t�nyleges feladatot ell�t� szolg�ltat�sokat enged�lyezze."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"A Linux az id�t a GMT (Greenwich Mean Time) alapj�n kezeli - a\n"
-"kiv�lasztott id�z�n�nak megfelel� helyi id�re konvert�lja azt. Az\n"
-"id�z�n�hoz val� igaz�t�s kikapcsolhat� \"A g�p �r�ja GMT-id�t mutat\"\n"
-"opci� kikapcsol�s�val - ekkor a rendszer�ra szerinti id� azonos lesz a\n"
-"g�p �r�ja szerintivel. Ez akkor hasznos, ha van a g�pen m�s oper�ci�s\n"
-"rendszer is (p�ld�ul Windows).\n"
-"\n"
-"Az \"Automatikus id�szinkroniz�ci�\" opci� automatikusan be�ll�tja az �r�t\n"
-"egy internetes g�phez kapcsol�dva. Az erre alkalmas g�pek megjelen�\n"
-"list�j�b�l v�lasszon ki egy �nh�z k�zel lev�t. Term�szetesen ehhez sz�ks�g\n"
-"van m�k�d� internetkapcsolatra. Ez a funkci� feltelep�t az �n g�p�re\n"
-"egy id�kiszolg�l�t, amelyet a helyi h�l�zat t�bbi g�pe is haszn�lhat."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"Az X (teljes n�ven: X Window System) a Linux grafikus fel�let�t ny�jt�\n"
-"rendszer. A Mandrake Linuxban lev� grafikus k�rnyezetek (KDE, GNOME,\n"
-"AfterStep, WindowMaker, ...) ezen grafikus rendszert haszn�lj�k.\n"
-"A telep�t� most megk�s�rli automatikusan be�ll�tani az X rendszert.\n"
-"\n"
-"Bizonyos - ritk�n el�fordul� - esetekben az automatikus be�ll�t�s nem\n"
-"hajthat� v�gre; ez �ltal�ban a nagyon r�gi illetve a nagyon �j\n"
-"hardverelemek eset�n van �gy. Ha sikeres a m�velet, akkor az X rendszer\n"
-"automatikusan elind�t�sra ker�l a legmegfelel�bb grafikus felbont�ssal (ez\n"
-"ut�bbi a monitor m�ret�t�l is f�gg). Egy ablaknak kell megjelennie,\n"
-"amelyben a telep�t� megk�rdi �nt, hogy az ablak l�that�-e.\n"
-"\n"
-"Amennyiben \"Szak�rt�\" m�dban v�gzi a telep�t�st, a telep�t� elind�tja\n"
-"az X be�ll�t�si var�zsl�t. A var�zsl�val kapcsolatban tov�bbi inform�ci�k\n"
-"a k�zik�nyvben tal�lhat�k.\n"
-"\n"
-"Ha l�that� az ablakban megjelen� �zenet, akkor nyomja le az \"Igen\"\n"
-"gombot; a telep�t� ekkor a k�vetkez� l�p�sre ugrik. Ha viszont az �zenet\n"
-"nem l�that�, az azt jelenti, hogy a be�ll�t�s nem megfelel�. A be�ll�t�s\n"
-"tesztel�se 10 m�sodperc eltelt�vel automatikusan v�get �r, a telep�t�\n"
-"ezut�n vissza�ll�tja a k�perny�t a kor�bbi �zemm�dba."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Amikor el�sz�r pr�b�lja ki az X be�ll�t�sait, elk�pzelhet�, hogy nem lesz\n"
-"megel�gedve azokkal (p�ld�ul a k�perny� t�l kicsi, vagy oldalir�nyban el\n"
-"van tol�dva). Ez�rt a DrakX m�g abban az esetben is megk�rdi �nt�l, hogy\n"
-"megfelelnek-e a be�ll�t�sok, ha az X rendben elindul. A program megjelen�t\n"
-"egy list�t az �ltala felismert �rv�nyes �zemm�dokr�l. A list�b�l\n"
-"kiv�laszthat� egy megfelel� grafikus m�d.\n"
-"\n"
-"V�gs� esetben - ha az X rendszert nem siker�l m�k�d�sbe hozni - v�lassza\n"
-"\"A grafikus k�rtya m�dos�t�sa\" funkci�t, majd az \"Unlisted\" (a\n"
-"list�ban nem szerepl� k�rtya) bejegyz�st, amikor pedig a program megk�rdi,\n"
-"hogy �n melyik kiszolg�l�t szeretn�, akkor v�lassza az \"FBDev\"-et.\n"
-"Ez egy biztons�gi opci�, amely b�rmely modern grafikus k�rty�val m�k�dik.\n"
-"Ezut�n v�lassza a \"M�g egy pr�ba\" funkci�t a biztons�g kedv��rt."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"V�g�l el kell d�nteni, hogy a rendszer grafikus m�dban induljon-e vagy sem.\n"
-"A program akkor is felteszi ezt a k�rd�st, ha �n kihagyta a be�ll�t�sok\n"
-"kipr�b�l�s�t. Ha a g�p kiszolg�l�k�nt fog �zemelni, vagy nem siker�lt\n"
-"be�ll�tani a grafikus m�dot, akkor a \"Nem\"-et �rdemes v�lasztani."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"A Mandrake Linux CD-nek van egy be�p�tett helyre�ll�t�si �zemm�dja. Ezen\n"
-"�zemm�d a k�vetkez�k�ppen �rhet� el: ind�tsa a rendszert a CD-r�l, majd\n"
-"nyomja le az \"F1\" billenty�t, �s g�pelje be a megjelen� parancssorban\n"
-"azt, hogy \"rescue\". Ha viszont a g�p nem k�pes CD-r�l val�\n"
-"rendszerind�t�sra, akkor vissza kell t�rnie ezen l�p�shez seg�ts�g�rt - ez\n"
-"legal�bb k�t esetben sz�ks�ges lehet:\n"
-"\n"
-"  - A rendszerbet�lt� telep�t�sekor (hacsak �n nem haszn�l m�s\n"
-"rendszerind�t� programot) a telep�t� m�dos�tja a f� lemez\n"
-"bet�lt�szektor�t (boot sector; m�s n�ven: MBR) annak �rdek�ben, hogy\n"
-"t�bbf�le oper�ci�s rendszert is be lehessen t�lteni (p�ld�ul: Linux\n"
-"�s Windows - ha van a g�pen Windows). Ha �n �jratelep�ti a Windowst, akkor\n"
-"a Microsoft-f�le telep�t� �t fogja �rni a bet�lt�szektort, �s emiatt �n nem\n"
-"lesz k�pes Linuxt ind�tani.\n"
-"\n"
-"  - Ha probl�ma mer�l fel, �s �n nem tudja elind�tani a Linux rendszert\n"
-"a merevlemezr�l, akkor ezen floppy fogja jelenteni az egyetlen lehet�s�get\n"
-"arra, hogy elind�tsa a rendszert. A floppy programokat tartalmaz a rendszer\n"
-"helyre�ll�t�s�hoz (arra az esetre, ha p�ld�ul �ramkimarad�s t�rt�nt).\n"
-"\n"
-"Ha k�ri ennek a l�p�snek a v�grehajt�s�t, akkor a telep�t� megk�ri �nt\n"
-"arra, hogy tegyen be egy floppyt a meghajt�ba. �gyeljen arra, hogy a\n"
-"floppylemezen ne legyen meg�rz�sre sz�nt adat. A lemezt nem sz�ks�ges\n"
-"el�zetesen form�zni, mivel a telep�t� fel�l�rja a teljes lemez tartalm�t."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Most kell megadni, hogy a Mandrake Linux telep�t�se a merevlemez melyik\n"
-"r�sz�re t�rt�njen. Ha a lemez m�g teljesen �res, vagy a kor�bban telep�tett\n"
-"oper�ci�s rendszer(ek) miatt nincs el�g szabad hely, akkor �jra kell\n"
-"part�cion�lni a lemezt. A part�cion�l�s a lemezter�let logikai\n"
-"�jrafeloszt�s�t jelenti - erre a Mandrake Linux telep�t�s�hez sz�ks�ges\n"
-"hely l�trehoz�sa �rdek�ben van sz�ks�g.\n"
-"\n"
-"A part�cion�l�s vesz�lyes m�velet. Hiba eset�n adatveszt�ssel j�rhat,\n"
-"r�ad�sul �ltal�ban nincs lehet�s�g visszat�rni egy kor�bbi �llapothoz.\n"
-"Emiatt kezd� felhaszn�l�knak sok neh�zs�get okozhat. Ez a var�zsl�\n"
-"megk�nny�ti a m�velet v�grehajt�s�t, de miel�tt elind�tan�, �rdemes\n"
-"alaposan �tolvasni a k�zik�nyv idev�g� r�sz�t.\n"
-"\n"
-"Ha a telep�t�st szak�rt�i m�dban futtatja, el fog indulni a DiskDrake nev�\n"
-"program, amely a Mandrake Linux rendszer part�cion�l�eszk�ze. Ezen program\n"
-"lehet�v� teszi a part�ci�k m�dos�t�s�t. Tov�bbi inform�ci�kat a "
-"felhaszn�l�i\n"
-"k�zik�nyv DiskDrake-r�l sz�l� fejezet�ben olvashat. Az ott ismertetett\n"
-"var�zsl�k a telep�t�b�l is elind�that�k, ehhez a \"Var�zsl�\" gombot kell\n"
-"lenyomni.\n"
-"\n"
-"Ha a part�ci�k m�r defini�lva vannak - ak�r egy kor�bbi telep�t�s �ltal,\n"
-"ak�r egy m�sf�le part�cion�l�eszk�z �ltal -, akkor egyszer�en v�lassza ki\n"
-"azokat a Linux rendszer telep�t�se sz�m�ra.\n"
-"\n"
-"Ha a sz�ks�ges part�ci�k m�g nem �llnak rendelkez�sre, l�tre kell hozni\n"
-"azokat a var�zsl�val. A lemezek tartalm�t�l f�gg�en t�bbf�le m�don lehet\n"
-"elj�rni:\n"
-"\n"
-"  - \"A szabad ter�let felhaszn�l�sa\": ez a lehet�s�g az �res meghajt�k\n"
-"automatikus part�cion�l�s�t jelenti. Tov�bbi k�rd�st nem tesz fel a\n"
-"telep�t�.\n"
-"\n"
-"  - \"M�r l�tez� part�ci� haszn�lata\": a var�zsl� tal�lt egy vagy t�bb\n"
-"linuxos part�ci�t a lemezen. Ha ezeket szeretn� haszn�lni a\n"
-"telep�t�shez, v�lassza ezt a lehet�s�get.\n"
-"\n"
-"  - \"A Windows part�ci�n tal�lhat� szabad hely felhaszn�l�sa\": ha a\n"
-"Windows �gy van feltelep�tve a lemezre, hogy elfoglalja az �sszes\n"
-"el�rhet� ter�letet, akkor annak egy r�sz�t fel kell szabad�tani a Linux\n"
-"sz�m�ra. Ez t�rt�nhet a Windows-part�ci� t�rl�s�vel (l�sd \"A teljes\n"
-"lemez t�rl�se\" �s a \"Szak�rt�i m�d\" lehet�s�geket) vagy\n"
-"�tm�retez�s�vel. Az �tm�retez�s v�grehajthat� a lemezen lev� adatok\n"
-"elveszt�se n�lk�l - felt�ve, hogy azt megel�z�en t�redezetts�gmentes�tve\n"
-"lett a Windows-part�ci�. Javasolt tov�bb� az adatok ment�se is.\n"
-"Ezen m�dszer a javasolt abban az esetben, ha a Mandrake Linuxt �s a\n"
-"Microsoft Windowst ugyanazon a g�pen szeretn� haszn�lni.\n"
-"\n"
-"Ha ezt a lehet�s�get v�lasztja, ne feledkezzen meg arr�l, hogy ennek\n"
-"hat�s�ra a Microsoft Windows part�ci� m�rete a mostanin�l kisebb lesz,\n"
-"teh�t a Windows haszn�latakor kevesebb hely lesz az adatok t�rol�s�ra\n"
-"�s �j szoftverek telep�t�s�re.\n"
-"\n"
-"  - \"A teljes lemez t�rl�se\": ha minden adatot �s minden part�ci�t\n"
-"t�r�lni szeretne a lemezr�l, �s a telep�t�shez az �gy felszabadul�\n"
-"helyet szeretn� haszn�lni, akkor v�lassza ezt a lehet�s�get. Legyen\n"
-"nagyon �vatos ezzel a lehet�s�ggel, mert a lemezen lev� adatok\n"
-"v�glegesen elvesznek a meger�s�t�s ut�n.\n"
-"\n"
-"Ha ezt a lehet�s�get v�lasztja, a lemezen lev� �sszes adat elv�sz.\n"
-"\n"
-"  - \"A Windows(TM) elt�vol�t�sa\": ez a funkci� egyszer�en let�r�l mindent\n"
-"a lemezr�l, �s �jrapart�cion�lja azt. A lemezen lev� �sszes adat elv�sz.\n"
-"\n"
-"Ha ezt a lehet�s�get v�lasztja, a lemezen lev� �sszes adat elv�sz.\n"
-"\n"
-"  - \"Szak�rt�i m�d\": ha k�zvetlen�l (var�zsl� n�lk�l) szeretn� elv�gezni\n"
-"a part�cion�l�st, akkor v�lassza ezt a lehet�s�get. Legyen �vatos - sok\n"
-"minden elv�gezhet� ebben az �zemm�dban, de a haszn�lata vesz�lyes. K�nnyen\n"
-"elvesz�theti a lemezen lev� �sszes adatot ennek a haszn�lat�val, ez�rt\n"
-"csak indokolt esetben v�lassza ezt a funkci�t."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"A telep�t�s befejez�d�tt; a Linux rendszer k�szen �ll a haszn�latra.\n"
-"A rendszer �jraind�t�s�hoz kattintson az \"OK\" gombra. Amikor a g�p\n"
-"�jraindul, elind�thatja a Linuxt vagy m�s oper�ci�s rendszert (ha t�bb\n"
-"oper�ci�s rendszer van a g�pen).\n"
-"\n"
-"A \"Speci�lis\" gomb (csak szak�rt�i m�dban) lenyom�s�ra k�t �jabb gomb\n"
-"jelenik meg:\n"
-"\n"
-"  - \"Automatikus telep�t�floppy k�sz�t�se\": olyan telep�t�floppy\n"
-"k�sz�t�se, amelynek haszn�lat�val emberi k�zrem�k�d�s n�lk�l v�gezhet�\n"
-"a rendszer telep�t�se. Az �gy v�gzett telep�t�sek a jelenlegi telep�t�s\n"
-"be�ll�t�sait haszn�lj�k.\n"
-"\n"
-"K�t lehet�s�g k�z�l lehet v�lasztani a gomb lenyom�sa ut�n:\n"
-"\n"
-"      - \"�jraj�tsz�s\". Ez r�szben automatiz�lt telep�t�st jelent;\n"
-"a part�cion�l�si l�p�s (csak az az egy) interakt�v marad.\n"
-"\n"
-"      - \"Automatikus\". Teljesen automatiz�lt telep�t�s; a merevlemez\n"
-"tartalma fel�l�r�dik, az �sszes kor�bbi adat elv�sz.\n"
-"\n"
-"Ez a lehet�s�g j�l haszn�lhat� akkor, amikor nagyobb sz�m� azonos g�pre\n"
-"kell a rendszert feltelep�teni. Az automatikus telep�t�ssel\n"
-"kapcsolatban a Mandrake honlapj�n tal�lhat�k tov�bbi inform�ci�k.\n"
-"\n"
-"  - \"Csomag�ssze�ll�t�s ment�se\"(*): elmenti a kor�bban tett\n"
-"csomagkijel�l�st (a kijel�lt csomagok list�j�t). Ha egy �jabb telep�t�s\n"
-"alkalm�val fel k�v�nja haszn�lni az elmentett list�t, akkor helyezze be\n"
-"az azt tartalmaz� floppyt a telep�t�s megkezd�sekor, majd nyomjon\n"
-"\"F1\"-et, ezut�n pedig adja ki a k�vetkez� parancsot:\n"
-"linux defcfg=\"floppy\"\n"
-"\n"
-"\n"
-"(*) Ehhez sz�ks�g lesz egy FAT f�jlrendszerre form�zott floppyra.\n"
-"A form�z�s Linux alatt a k�vetkez� paranccsal v�gezhet� el:\n"
-"\"mformat a:\""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Az �jonnan l�trehozott part�ci�k csak form�z�s ut�n lesznek haszn�lhat�k\n"
-"(a \"form�z�s\" l�nyeg�ben egy f�jlrendszer l�trehoz�s�t jelenti).\n"
-"\n"
-"Most �jraform�zhat bizonyos, m�r l�tez� part�ci�kat (ha azok tartalm�t\n"
-"teljesen le k�v�nja t�r�lni). Ha ezt k�v�nja tenni, jel�lje ki azon\n"
-"part�ci�kat is.\n"
-"\n"
-"Nem sz�ks�ges �jraform�zni az �sszes, kor�bban l�trehozott part�ci�t.\n"
-"Az oper�ci�s rendszernek sz�nt part�ci�(ka)t mindenk�ppen le kell form�zni\n"
-"(p�ld�ul a \"/\", \"/usr\" �s \"/var\" part�ci�kat), de a felhaszn�l�i\n"
-"�s egy�b adatokat tartalmaz� part�ci�kat nem sz�ks�ges �jraform�zni (ilyen\n"
-"p�ld�ul a \"/home\").\n"
-"\n"
-"Gondosan ellen�rizze, mely part�ci�kat jel�li ki, mert a form�z�s sor�n az\n"
-"adott part�ci�kon lev� adatok t�rl�dnek, �s k�s�bb nem nyerhet�k vissza.\n"
-"\n"
-"Kattintson az \"OK\" gombra a form�z�s megkezd�s�hez.\n"
-"\n"
-"Kattintson a \"M�gsem\" gombra, ha m�s part�ci�ra szeretn� telep�teni a\n"
-"Mandrake Linux oper�ci�s rendszert.\n"
-"\n"
-"Kattintson a \"Speci�lis\" gombra, ha bizonyos part�ci�kat ellen�riztetni\n"
-"k�v�n (hib�s blokkok keres�se)."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"A Mandrake Linux oper�ci�s rendszer telep�t�se folyik.\n"
-"A telep�tend� szoftverek mennyis�g�t�l �s a g�p sebess�g�t�l\n"
-"f�gg�en a telep�t�s igen sok�ig eltarthat.\n"
-"\n"
-"Egy kis t�relmet k�rek..."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Lehets�ges, hogy amikor �n a Mandrake Linux rendszert telep�ti, m�r\n"
-"friss�t�sre ker�ltek bizonyos csomagok a rendszer kiad�sa �ta.\n"
-"Elk�pzelhet�, hogy bizonyos hib�k ki lettek jav�tva, illetve\n"
-"hogy meg lettek oldva bizonyos felmer�lt biztons�gi probl�m�k. Ezeket\n"
-"a friss�t�seket �n let�ltheti az interneten kereszt�l.\n"
-"Nyomja le az \"Igen\" gombot, ha van m�k�d� internetkapcsolata. Ha viszont\n"
-"ink�bb k�s�bb k�v�nja telep�teni a friss�t�seket, akkor a \"Nem\" gombot\n"
-"nyomja le.\n"
-"\n"
-"Ha az \"Igen\" gombot nyomja le, akkor megjelenik egy lista azon helyekr�l,\n"
-"amelyekr�l a friss�t�sek let�lthet�k. V�lasszon k�z�l�k egy �nh�z k�zel "
-"lev�t.\n"
-"Ezt k�vet�en egy csomagv�laszt�si fa jelenik meg. Ha telep�teni k�v�nja a\n"
-"kijel�lt csomagokat, akkor nyomja le a \"Telep�t�s\" gombot. Ha nem k�v�n\n"
-"csomagokat telep�teni, akkor a \"M�gsem\" gombot nyomja le."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Miel�tt tov�bbl�pne, olvassa �t alaposan a licencegyezm�nyt, mely az\n"
-"eg�sz Mandrake Linux disztrib�ci�ra �rv�nyes, �s ha nem fogadja el\n"
-"valamelyik felt�telt, kattintson a \"Nem fogadom el\" gombra. Ekkor a\n"
-"telep�t�s azonnal f�lbeszakad. A telep�t�s folytat�s�hoz kattintson\n"
-"az \"Elfogadom\" gombra."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Most ki kell v�lasztani egy biztons�gi szintet a g�p sz�m�ra. Alapszab�ly,\n"
-"hogy min�l ink�bb el�rhet� a g�p, illetve min�l kritikusabb adatok vannak\n"
-"azon t�rolva, ann�l magasabbra �rdemes venni a biztons�gi szintet. Magasabb\n"
-"szint eset�n viszont �ltal�ban neh�zkesebb a g�p haszn�lata. A szintek\n"
-"jelent�s�vel kapcsolatban a k�zik�nyv \"msec\" fejezet�ben tal�lhat�k\n"
-"tov�bbi inform�ci�k.\n"
-"\n"
-"Ha nem biztos benne, hogy mit volna �rdemes v�lasztani, v�lassza az\n"
-"alap�rtelmez�s szerinti lehet�s�get."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Most kell kiv�lasztani a Mandrake Linux rendszer telep�t�s�hez haszn�lni\n"
-"k�v�nt part�ci�kat. Ha a k�v�nt part�ci�k m�r l�tre lettek hozva (egy\n"
-"kor�bbi Linux-telep�t�s vagy valamilyen part�cion�l�si seg�dprogram\n"
-"�ltal), akkor felhaszn�lhat�k a m�r l�tez� part�ci�k. Ha viszont m�g nem\n"
-"l�teznek, akkor el�sz�r defini�lni kell a part�ci�kat.\n"
-"\n"
-"Part�ci� l�trehoz�s�n�l el�sz�r ki kell v�lasztani egy merevlemezt.\n"
-"Ehhez kattintson a megfelel� azonos�t�ra: \"hda\" az els� IDE-csatol�s\n"
-"lemez, \"hdb\" a m�sodik; \"sda\" az els� SCSI-csatol�s lemez, �s �gy\n"
-"tov�bb.\n"
-"\n"
-"A kijel�lt merevlemez part�cion�l�s�n�l az al�bbi lehet�s�gek k�z�l lehet\n"
-"v�lasztani:\n"
-"\n"
-"  - \"Teljes t�rl�s\": ennek hat�s�ra a kijel�lt merevlemezen tal�lhat�\n"
-"�sszes part�ci� t�rl�sre ker�l.\n"
-"\n"
-"  - \"Automatikus helyfoglal�s\": ez lehet�v� teszi Ext2 �s lapoz�si\n"
-"part�ci�k automatikus l�trehoz�s�t a rendelkez�sre �ll� �res ter�leten.\n"
-"\n"
-"  - \"Egy�b\": hozz�f�r�st biztos�t tov�bbi lehet�s�gekhez:\n"
-"\n"
-"      - \"A part�ci�s t�bla ment�se\": a part�ci�s t�bla ment�se floppyra.\n"
-"A floppy haszn�lat�val k�s�bb - sz�ks�g eset�n - helyre lehet �ll�tani\n"
-"(vissza lehet t�lteni) a part�ci�s t�bl�t. Er�sen aj�nljuk, hogy haszn�lja\n"
-"ezt a lehet�s�get.\n"
-"\n"
-"      - \"A part�ci�s t�bla visszat�lt�se\": egy kor�bban elmentett\n"
-"part�ci�s t�bla visszat�lt�se floppyr�l.\n"
-"\n"
-"      - \"A part�ci�s t�bla helyre�ll�t�sa\": ha a part�ci�s t�bla\n"
-"megs�r�lt, akkor ezzel lehet megpr�b�lni annak kijav�t�s�t. Legyen nagyon\n"
-"�vatos, mert a jav�t�s nem mindig siker�l.\n"
-"\n"
-"      - \"A part�ci�s t�bla �jrat�lt�se\": ennek hat�s�ra az �sszes\n"
-"m�dos�t�s elv�sz; a program ism�t bet�lti a kiindul�si part�ci�s t�bl�t.\n"
-"\n"
-"      - \"Cser�lhet� lemez automatikus csatlakoztat�sa\": ha nincs\n"
-"bejel�lve ez az opci�, akkor a felhaszn�l�knak k�zzel kell v�gezni�k a\n"
-"cser�lhet� adathordoz�k (p�ld�ul CD �s floppy) csatlakoztat�s�t illetve\n"
-"lev�laszt�s�t.\n"
-"\n"
-"  - \"Var�zsl�\": akkor v�lassza ezt a lehet�s�get, ha a part�cion�l�st\n"
-"var�zsl� seg�ts�g�vel szeretn� v�grehajtani. Ha nem ismeri a\n"
-"part�cion�l�s technikai r�szleteit, akkor �rdemes ezt v�lasztania.\n"
-"\n"
-"  - \"Visszavon�s\": ezzel lehet a m�dos�t�sokat visszavonni.\n"
-"\n"
-"  - \"�tv�lt�s norm�l m�dba\" illetve \"�tv�lt�s szak�rt�i m�dba\":\n"
-"szak�rt�i m�dba val� kapcsol�s eset�n t�bb funkci� v�lik el�rhet�v�\n"
-"(part�ci�t�pus, opci�k, form�z�s) �s t�bb inform�ci�t kap a felhaszn�l�.\n"
-"\n"
-"  - \"K�sz\": a part�cion�l�s befejez�se ut�n ezzel lehet a m�dos�t�sokat\n"
-"elmenteni a lemezre.\n"
-"\n"
-"Az �sszes funkci� el�rhet� a billenty�zetr�l is. A part�ci�k k�z�tt a Tab\n"
-"billenty�vel �s a fel/le nyilakkal lehet mozogni.\n"
-"\n"
-"Ha egy part�ci� ki van jel�lve, haszn�lni lehet a k�vetkez�ket:\n"
-"\n"
-"  - Ctrl+C: �j part�ci� l�trehoz�sa (ha �res part�ci� van kijel�lve)\n"
-"\n"
-"  - Ctrl+D: part�ci� t�rl�se\n"
-"\n"
-"  - Ctrl+M: csatlakoztat�si (mount) pont megad�sa\n"
-"\n"
-"Ha inform�ci�t szeretne a haszn�lhat� f�jlrendszert�pusokr�l, olvassa el\n"
-"a k�zik�nyv Ext2fs f�jlrendszerrel foglalkoz� fejezet�t.\n"
-"\n"
-"Ha a telep�t�s egy PowerPC g�pre t�rt�nik, akkor �rdemes l�trehozni egy\n"
-"kism�ret� HFS rendszerind�t�si part�ci�t (legal�bb 1 MB) a \"Yaboot\"\n"
-"rendszerbet�lt� program sz�m�ra. Ha nagyobbra veszi a part�ci�t (p�ld�ul\n"
-"50 MB m�ret�re), akkor elt�rolhat� lesz rajta p�ld�ul egy tartal�k kernel\n"
-"illetve RAM-diszk k�pf�jlok (image-ek) esetleges rendszerhib�k eset�re."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Egyn�l t�bb Microsoft-part�ci�t tal�ltam a lemezen.\n"
-"V�lassza ki azt, amelyiket �t szeretn� m�retezni, hogy a\n"
-"Mandrake Linux feltelep�thet� legyen.\n"
-"\n"
-"A part�ci�lista a k�vetkez� mez�ket tartalmazza: \"linuxos n�v\",\n"
-"\"windowsos n�v\", \"kapacit�s\".\n"
-"\n"
-"A \"linuxos n�v\" form�tuma a k�vetkez�: \"a merevlemez t�pusa\",\n"
-"\"a lemez azonos�t�ja\", \"a part�ci� azonos�t�ja\" (p�ld�ul \"hda1\").\n"
-"\n"
-"Ha a lemez IDE-csatol�s, akkor \"a merevlemez t�pusa\" \"hd\",\n"
-"ha pedig SCSI-csatol�s, akkor \"sd\".\n"
-"\n"
-"\"A lemez azonos�t�ja\" mindig egy bet� a \"hd\" illetve az \"sd\" ut�n.\n"
-"IDE-csatol�s meghajt�k eset�n:\n"
-"\n"
-"  - \"a\" jelent�se: \"els� (master) meghajt� az els� IDE-vez�rl�n\"\n"
-"\n"
-"  - \"b\" jelent�se: \"m�sodik (slave) meghajt� az els� IDE-vez�rl�n\"\n"
-"\n"
-"  - \"c\" jelent�se: \"els� meghajt� a m�sodik IDE-vez�rl�n\"\n"
-"\n"
-"  - \"d\" jelent�se: \"m�sodik meghajt� a m�sodik IDE-vez�rl�n\"\n"
-"\n"
-"SCSI-csatol�s meghajt�kn�l az \"a\" jelent�se: \"a legalacsonyabb\n"
-"SCSI-azonos�t�\", \"b\" jelent�se: \"a m�sodik legalacsonyabb\n"
-"SCSI-azonos�t�\", �s �gy tov�bb.\n"
-"\n"
-"A \"windowsos n�v\" a meghajt� Windows alatt haszn�lt azonos�t�ja\n"
-"(az els� lemez vagy part�ci� neve \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Egy kis t�relmet k�rek, a m�velet t�bb percet is ig�nybe vehet."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Most k�z�lnie kell a telep�t�vel, hogy alap�rtelmez�s szerinti\n"
-"(\"Aj�nlott\") telep�t�st szeretne-e v�gezni, vagy pedig nagyobb befoly�st\n"
-"szeretne a telep�t�si folyamat felett (\"Szak�rt�\"). V�laszthat tov�bb�\n"
-"a k�vetkez� lehet�s�gek k�z�l: �j telep�t�s illetve egy meglev� Mandrake\n"
-"Linux rendszer friss�t�se.\n"
-"\n"
-"  - \"Telep�t�s\": a kor�bbi rendszer fel�l�r�sra ker�l. Att�l f�gg�en,\n"
-"hogy mi tal�lhat� a g�pen, bizonyos (linuxos vagy egy�b) part�ci�k\n"
-"v�ltozatlan tartalommal meg�rizhet�k.\n"
-"\n"
-"  - \"Friss�t�s\": lehet�v� teszi egy kor�bbi Mandrake Linux telep�t�s\n"
-"csomagjainak friss�t�s�t. A merevlemez part�ci�i v�ltozatlanok maradnak,\n"
-"a felhaszn�l�k be�ll�t�sai sem m�dosulnak. A norm�l telep�t�sben jelen\n"
-"lev� t�bbi be�ll�t�si l�p�s itt is el�rhet�.\n"
-"\n"
-"  - \"Csak a csomagok friss�t�se\": lehet�v� teszi egy l�tez� Mandrake\n"
-"Linux rendszer friss�t�s�t a rendszerbe�ll�t�sok m�dos�t�sa n�lk�l.\n"
-"Lehet�s�g van �j csomagok telep�t�s�re is.\n"
-"\n"
-"Friss�t�s haszn�lata Mandrake Linux 8.1 vagy �jabb kiad�s eset�n javasolt.\n"
-"\n"
-"A Linuxszal kapcsolatos ismereteit�l f�gg�en v�lassza ki a k�vetkez�\n"
-"lehet�s�gek k�z�l a Mandrake Linux oper�ci�s rendszer telep�t�s�nek illetve\n"
-"friss�t�s�nek m�dj�t:\n"
-"\n"
-"  - \"Aj�nlott\": v�lassza ezt, ha m�g nem telep�tett Linux oper�ci�s\n"
-"rendszert. A telep�t�s nagyon egyszer� lesz; csak n�h�ny k�rd�st fog\n"
-"�nnek feltenni a telep�t�.\n"
-"\n"
-"  - \"Szak�rt�\": ha t�bb ismerettel rendelkezik a Linux rendszerrel\n"
-"kapcsolatban, akkor �rdemes lehet ezt a telep�t�si m�dot v�lasztania.\n"
-"A szak�rt�i m�d lehet�v� teszi, hogy �n testreszabott telep�t�st\n"
-"v�gezzen. Bizonyos k�rd�sek megv�laszol�sa neh�z lehet, ha �n nem\n"
-"rendelkezik alaposabb Linux-ismeretekkel; ez�rt fontolja meg, hogy\n"
-"ezt a lehet�s�get v�lasztja-e."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Norm�l esetben a DrakX kiv�lasztja a megfelel� billenty�zetet (a v�lasztott\n"
-"nyelvt�l f�gg�en), �s �n nem is fogja l�tni ezt a l�p�st. Viszont\n"
-"elk�pzelhet�, hogy �nnek nem a nyelv�nek megfelel� billenty�zete van;\n"
-"p�ld�ul ha �n egy angolul besz�l� magyar ember, akkor lehet, hogy magyar\n"
-"billenty�zetkioszt�st szeretne. Hasonl� helyzet ad�dhat, ha az �n nyelve\n"
-"magyar, de �n Quebecben tart�zkodik. Mindk�t esetben vissza kell l�pnie\n"
-"erre a telep�t�si l�p�sre �s ki kell v�lasztania egy megfelel�\n"
-"billenty�zetet a list�b�l.\n"
-"\n"
-"Hogy megjelenjen a t�mogatott billenty�zetek teljes list�ja, kattintson\n"
-"az \"Egy�b\" nyom�gombra."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"V�lassza ki a telep�t�shez �s a telep�tett rendszerhez haszn�land� nyelvet.\n"
-"\n"
-"A \"Speci�lis\" nyom�gombra kattintva kiv�laszthat�k tov�bbi telep�tend�\n"
-"nyelvek. Tov�bbi nyelvek v�laszt�sa eset�n telep�t�sre ker�lnek az adott\n"
-"nyelvekhez tartoz� f�jlok is - a rendszerdokument�ci� �s az alkalmaz�sok\n"
-"sz�vegei. Ha p�ld�ul a g�pet spanyol felhaszn�l�k is haszn�lni fogj�k,\n"
-"akkor a f� nyelvnek (p�ld�ul magyar) a f�ban t�rt�n� kiv�laszt�s�t k�vet�en\n"
-"a Speci�lis r�szben kattintson a \"Spanish|Spain\" (spanyol|Spanyolorsz�g)\n"
-"bejegyz�shez tartoz� n�gyzetre.\n"
-"\n"
-"T�bb nyelv is telep�thet�. Ha kijel�lte az �sszes k�v�nt nyelvet,\n"
-"kattintson az \"OK\" gombra a folytat�shoz."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"A DrakX �ltal�ban felismeri, hogy h�ny gomb van az eg�ren. Ha ez nem �gy\n"
-"t�rt�nik, akkor azt felt�telezi, hogy �n k�tgombos eg�rrel rendelkezik,\n"
-"�s ez esetben be�ll�tja a harmadik eg�rgomb emul�l�s�t. A program "
-"felismeri,\n"
-"hogy milyen fajt�j� az eg�r: PS/2, soros vagy USB.\n"
-"\n"
-"Ha �n m�sf�le eg�rt�pust szeretne megadni, v�lassza ki a megfelel� t�pust\n"
-"a list�b�l.\n"
-"\n"
-"Ha az alap�rtelmezett�l elt�r� egeret v�laszt, akkor megjelenik egy\n"
-"tesztel�si k�perny�. Haszn�lja az eg�rgombokat �s a g�rg�t, hogy\n"
-"ellen�rizze a be�ll�t�sok helyess�g�t. Ha az eg�r nem m�k�dik helyesen,\n"
-"akkor nyomja le a Sz�k�z vagy az Enter (Return) billenty�t, �s v�lasszon\n"
-"egy m�sik fajta egeret."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"V�lassza ki a megfelel� portot. P�ld�ul a windowsos \"COM1\" port\n"
-"neve Linux alatt \"ttyS0\"."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Ez a legkritikusabb pont a Linux rendszer biztons�g�ra vonatkoz�an:\n"
-"meg kell adni a \"root\" nev� felhaszn�l� jelszav�t. A \"root\" azonos�t�\n"
-"a rendszeradminisztr�tort jel�li; ez az egyetlen olyan felhaszn�l�,\n"
-"amelynek joga van rendszerfriss�t�st v�gezni, felhaszn�l�kat l�trehozni,\n"
-"m�dos�tani a rendszerbe�ll�t�sokat illetve hasonl� tev�kenys�geket v�gezni.\n"
-"R�viden sz�lva: a \"root\" felhaszn�l� b�rmit megtehet a rendszeren.\n"
-"Ez az, ami�rt a jelsz�t �gy kell megv�lasztani, hogy azt min�l nehezebb\n"
-"legyen kital�lni. A telep�t� jelzi az �n sz�m�ra, ha a jelsz�t k�nnyen\n"
-"kital�lhat�nak tartja. Nem k�telez� megadni jelsz�t, de er�sen javasolt;\n"
-"ha m�s�rt nem is, a k�vetkez� miatt: ne gondolja, hogy ha �n Linux\n"
-"rendszert ind�t, akkor a g�pen lev� t�bbi oper�ci�s rendszer felt�tlen�l\n"
-"v�dve van az esetlegesen elk�vetett hib�kt�l. A \"root\" felhaszn�l�ra nem\n"
-"vonatkoznak a korl�toz�sok; ha p�ld�ul �vatlanul kezeli a part�ci�kat,\n"
-"akkor ak�r le is t�r�lheti az azokon lev� adatokat; ez�rt fontos, hogy\n"
-"a rendszeradminisztr�tori azonos�t� v�dve legyen.\n"
-"\n"
-"A jelsz�nak bet�kb�l �s sz�mokb�l kell �llni, �s legal�bb 8 karakter\n"
-"hossz�s�g�nak kell lenni. Soha ne �rja le a rendszeradminisztr�tori\n"
-"jelsz�t - ez vesz�lyt jelenthetne a rendszerre.\n"
-"\n"
-"A fentiek ellen�re ne v�lasszon t�l hossz� vagy t�l bonyolult jelsz�t, mert\n"
-"�nnek fejben kell tartania azt.\n"
-"\n"
-"A jelsz� nem jelenik meg a k�perny�n, amikor �n beg�peli azt. Emiatt\n"
-"k�tszer kell azt be�rni - ez�ltal cs�kken az es�lye annak, hogy �n elg�peli\n"
-"a jelsz�t. Ha esetleg ugyanazt a g�pel�si hib�t k�veti el a jelsz� els�\n"
-"�s m�sodik megad�s�n�l, akkor ezen - helytelen�l �rt - jelsz�val kell majd\n"
-"bejelentkezni a rendszerbe.\n"
-"\n"
-"Szak�rt�i m�d eset�n a telep�t� megk�rdi, hogy sz�ks�g van-e azonos�t�si\n"
-"kiszolg�l� (authentication server) haszn�lat�ra (NIS, LDAP, ...).\n"
-"\n"
-"Ha az �n h�l�zata LDAP protokollt (illetve NIS-t) haszn�l azonos�t�shoz,\n"
-"akkor v�lassza az \"LDAP\" (illetve \"NIS\") lehet�s�get azonos�t�si\n"
-"m�dszerk�nt. Ha nem tudja, mit kellene megadni, k�rdezze meg a\n"
-"rendszergazd�t.\n"
-"\n"
-"Ha a sz�m�t�g�p nem kapcsol�dik semmilyen adminisztr�lt h�l�zathoz, akkor\n"
-"v�lassza a \"Helyi f�jlok\" lehet�s�get."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"A LILO �s a GRUB linuxos rendszerind�t� programok. Ez a f�zis �ltal�ban\n"
-"teljesen automatikus. A telep�t� elemzi a lemez bet�lt�szektor�t, �s\n"
-"annak megfelel�en cselekszik, hogy ott mit tal�l:\n"
-"\n"
-"  - Ha windowsos bet�lt�szektort tal�l, akkor azt helyettes�teni fogja egy\n"
-"GRUB/LILO bet�lt�szektorral. Ez�rt �nnek lehet�s�ge lesz arra is, hogy\n"
-"Linuxt ind�tson, �s arra is, hogy egy m�sik oper�ci�s rendszert.\n"
-"\n"
-"  - Ha GRUB vagy LILO bet�lt�szektort tal�l, helyettes�ti azt egy �j\n"
-"p�ld�nnyal.\n"
-"\n"
-"Ha a telep�t� nem tud d�nteni, akkor megjelen�t egy p�rbesz�dablakot\n"
-"k�l�nf�le lehet�s�gekkel.\n"
-"\n"
-"  - \"A haszn�lni k�v�nt rendszerbet�lt�\": h�rom lehet�s�g van:\n"
-"\n"
-"      - \"GRUB\": ha a GRUB-ot szeretn� haszn�lni (sz�veges men�).\n"
-"\n"
-"      - \"LILO, grafikus men�vel\": ha grafikus fel�let� LILO-t szeretne.\n"
-"\n"
-"      - \"LILO, sz�veges men�vel\": ha sz�veges fel�let� LILO-t szeretne.\n"
-"\n"
-"  - \"Rendszerind�t�si eszk�z\": a legt�bb esetben nincs sz�ks�g az\n"
-"alap�rtelmezett �rt�k (\"/dev/hda\") m�dos�t�s�ra, de ha k�v�nja, a\n"
-"rendszerbet�lt� telep�thet� a m�sodik merevlemezre is (\"/dev/hdb\"),\n"
-"vagy ak�r floppylemezre is (\"/dev/fd0\").\n"
-"\n"
-"  - \"V�rakoz�si id� az alap�rtelmezett rendszer bet�lt�se el�tt\": a g�p\n"
-"�jraind�t�sakor ennyi ideje van a felhaszn�l�nak a rendszerbet�lt�\n"
-"men�j�nek megjelen�s�t k�vet�en arra, hogy kiv�lassza, melyik rendszert\n"
-"k�v�nja elind�tani (ha nem az alap�rtelmezettet).\n"
-"\n"
-"Legyen �vatos: ha nem telep�t rendszerbet�lt�t (azaz a \"M�gsem\" gombot\n"
-"nyomja le), akkor biztos�tania kell egy m�sf�le m�dszert a Mandrake Linux\n"
-"rendszer elind�t�s�ra. Tov�bb�: csak akkor m�dos�tsa az opci�kat, ha biztos\n"
-"abban, hogy tiszt�ban van a funkci�jukkal.\n"
-"\n"
-"A p�rbesz�dablak \"Speci�lis\" gombj�ra kattintva tov�bbi opci�k v�lnak\n"
-"el�rhet�v� - ezek a szak�rt� felhaszn�l�k sz�m�ra lesznek l�nyegesek.\n"
-"\n"
-"Miut�n be�ll�totta az �ltal�nos rendszerbet�lt�-param�tereket, megjelenik\n"
-"a bet�lt�si lehet�s�gek list�ja, amely rendszerind�t�skor lesz el�rhet�.\n"
-"\n"
-"Ha van m�sik oper�ci�s rendszer a g�pen, az automatikusan fel lesz v�ve a\n"
-"bet�lt�si men�be. Itt m�dos�that�k az aktu�lis be�ll�t�sok. Egy elem\n"
-"m�dos�t�s�hoz illetve elt�vol�t�s�hoz jel�lje ki az elemet, majd kattintson\n"
-"a \"M�dos�t�s\" gombra. �j elemet a \"Hozz�ad�s\" funkci�val lehet "
-"felvenni.\n"
-"A telep�t�s k�vetkez� l�p�s�re val� ugr�s a \"K�sz\" gombbal lehets�ges."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"A LILO (a \"LInux LOader\") �s a GRUB rendszerind�t� programok: a g�p\n"
-"bekapcsol�sa ut�n el tudj�k ind�tani a Linuxt vagy egy m�sik oper�ci�s\n"
-"rendszert. Telep�t�skor a felismert oper�ci�s rendszerek bejegyz�sei\n"
-"�ltal�ban l�trej�nnek. Ha valamilyen ok miatt ez nem t�rt�nt meg,\n"
-"akkor itt k�zzel l�tre lehet hozni �ket. �gyeljen a megfelel�\n"
-"param�terez�sre!\n"
-"\n"
-"Ha valamelyik oper�ci�s rendszert nem akarja el�rhet�v� tenni, akkor\n"
-"t�r�lheti annak rendszerbet�lt�si bejegyz�seit, de ebben az esetben\n"
-"k�s�bb csak ind�t�lemezzel tudja majd azt az oper�ci�s rendszert elind�tani."
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Itt kell megadni, hogy hov� ker�ljenek a Linux\n"
-"oper�ci�s rendszer bet�lt�s�hez sz�ks�ges adatok.\n"
-"\n"
-"V�lassza \"A lemez els� szektora (MBR)\" opci�t, ha\n"
-"nincs kiz�r� ok."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Itt lehet nyomtat�rendszert v�lasztani a g�p sz�m�ra. M�s oper�ci�s\n"
-"rendszerekben �ltal�ban csak egy van, a Mandrake Linuxban viszont h�rom is.\n"
-"\n"
-"  - \"pdq\": \"print, don't queue\", azaz sorba tev�s n�lk�l t�rt�n�\n"
-"nyomtat�s. Akkor v�lassza ezt, ha k�zvetlen kapcsolat van a\n"
-"nyomtat�val, �s nincsen h�l�zati nyomtat�ja. Ez a m�dszer csak a\n"
-"legegyszer�bb h�l�zati szolg�ltat�sokat ny�jtja, �s h�l�zaton el�gg�\n"
-"lass�. V�lassza a \"pdq\" m�dszert, ha nem rendelkezik komolyabb linuxos\n"
-"ismeretekkel. Lehet�s�ge van arra, hogy telep�t�s ut�n m�dos�tsa ezt a\n"
-"be�ll�t�st; ehhez a PrinterDrake programot kell futtatni a Mandrake\n"
-"Vez�rl�k�zpontban - a szak�rt�i be�ll�t�sokat kell m�dos�tani.\n"
-"\n"
-"  - \"CUPS\": \"Common Unix Printing System\", azaz �ltal�nos Unix\n"
-"nyomtat�rendszer. Helyi �s t�voli nyomtat�kra val� nyomtat�shoz remek�l\n"
-"haszn�lhat�. Ez egy egyszer� rendszer, �s k�pes a r�gi \"lpd\"\n"
-"nyomtat�rendszer kiszolg�l�jak�nt vagy kliensek�nt funkcion�lni -\n"
-"vagyis kompatibilis a r�gebbi rendszerekkel. Nagy tud�s� rendszer,\n"
-"viszont az alapvet� be�ll�t�sok majdnem olyan egyszer�en elv�gezhet�k\n"
-"benne, mint a \"pdq\" eset�ben. Ha arra haszn�lja, hogy egy \"lpd\"\n"
-"kiszolg�l�t emul�ljon vele, akkor aktiv�lnia kell a \"cups-lpd\"\n"
-"szolg�ltat�st. Rendelkezik grafikus fel�lettel, amely nyomtat�sra\n"
-"illetve a nyomtat�param�terek kiv�laszt�s�ra haszn�lhat�.\n"
-"\n"
-"  - \"lprNG\": \"line printer daemon New Generation\", azaz �j-gener�ci�s\n"
-"nyomtat�szolg�ltat�s. Ez a rendszer nagyj�b�l azt tudja, amit a t�bbi\n"
-"hasonl�, de k�pes Novell h�l�zatra k�t�tt nyomtat�kra is nyomtatni, mivel\n"
-"t�mogatja az IPX protokollt. Lehet�s�get ny�jt konzolos parancsok fel�\n"
-"t�rt�n� nyomtat�sra is. Ha �nnek sz�ks�ge van a Novellre, illetve ha\n"
-"parancsok fel� k�v�n nyomtatni an�lk�l, hogy cs�vezet�ket haszn�lna,\n"
-"akkor haszn�lja az lprNG rendszert. Ett�l elt�r� esetekben a CUPS\n"
-"haszn�lata javasolt, mivel egyszer�bb �s a h�l�zatkezel�se is jobb."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"A DrakX (a telep�t�) most megkeresi a g�pben lev� IDE-eszk�z�ket. Felder�ti\n"
-"a PCI SCSI-k�rty�kat is. A program a felismert SCSI-k�rty�khoz\n"
-"automatikusan feltelep�ti a megfelel� meghajt�programokat.\n"
-"\n"
-"Mivel a hardverfelder�t�s nem mindig ismeri fel a g�pben lev� eszk�z�ket,\n"
-"ez�rt a telep�t� r� fog k�rdezni, van-e a g�pben PCI SCSI-k�rtya.\n"
-"Ha tudja, hogy van a g�pben SCSI-k�rtya, kattintson az \"Igen\"-re.\n"
-"Ez esetben egy list�b�l lehet kijel�lni a k�rty�t. Ha nincsen SCSI\n"
-"hardver a g�pben, akkor kattintson a \"Nem\" gombra. Ha nem biztos a\n"
-"v�laszban, megtekintheti a megtal�lt hardverelemek list�j�t\n"
-"\"A hardverjellemz�k megjelen�t�se\" funkci�t kiv�lasztva, majd\n"
-"az \"OK\"-ra kattintva. Vizsg�lja meg a list�t, majd kattintson az\n"
-"\"OK\" gombra a SCSI-val kapcsolatos k�rd�shez val� visszat�r�shez.\n"
-"\n"
-"Ha k�zzel kell megadnia a k�rtya t�pus�t, a telep�t� megk�rdezi, hogy\n"
-"szeretn�-e megadni a k�rtya jellemz�it. �ltal�ban erre nincs sz�ks�g,\n"
-"mivel a program le tudja k�rdezni a megfelel� be�ll�t�sokat. A legt�bb\n"
-"esetben ez j�l m�k�dik.\n"
-"\n"
-"Ha a telep�t� nem tudja meghat�rozni a sz�ks�ges jellemz�ket, akkor\n"
-"�nnek kell megadnia a meghajt�program param�tereit. Olvassa el a\n"
-"Felhaszn�l�i K�zik�nyv 3. fejezet�nek \"Hardverinform�ci�k �sszegy�jt�se\"\n"
-"c�m� szakasz�t, ahonnan megtudhatja, hogyan lehet inform�ci�t szerezni\n"
-"a sz�ks�ges param�terekkel kapcsolatban a hardver dokument�ci�j�b�l, a\n"
-"gy�rt� honlapj�r�l (ha rendelkezik internet-hozz�f�r�ssel) illetve a\n"
-"Microsoft Windowsb�l (ha haszn�lta azzal az illet� hardvert)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Tov�bbi bejegyz�seket lehet felvenni a Yaboot-ba, p�ld�ul m�s oper�ci�s\n"
-"rendszereket, tov�bbi kerneleket vagy hibajav�t�si kernelt.\n"
-"\n"
-"M�s oper�ci�s rendszerekn�l a bejegyz�s egy c�mk�b�l �s az ind�t�si\n"
-"part�ci� nev�b�l �ll.\n"
-"\n"
-"Linux eset�n a k�vetkez� be�ll�t�sok lehetnek:\n"
-"\n"
-"  - C�mke: ezt a nevet a Yaboot-ba beg�pelve lehet majd elind�tani a\n"
-"megadott oper�ci�s rendszert.\n"
-"\n"
-"  - Ind�t�f�jl: a rendszer ind�t�si f�jlj�nak neve. �ltal�ban \"vmlinux\",\n"
-"vagy ugyanez valamilyen kiterjeszt�ssel.\n"
-"\n"
-"  - Gy�k�r: a telep�tett Linux rendszer gy�k�rpart�ci�ja (\"/\").\n"
-"\n"
-"  - Hozz�f�z�s: Apple g�pekn�l ezt az opci�t gyakran haszn�lj�k a\n"
-"videok�rtya inicializ�l�s�hoz illetve a gyakran hi�nyz� m�sodik �s\n"
-"harmadik eg�rgomb billenty�zetr�l t�rt�n� emul�l�s�nak be�ll�t�s�hoz.\n"
-"N�h�ny p�lda l�that� az al�bbiakban:\n"
-"\n"
-"    video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"    video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-"  - Kezdeti RAM-diszk: ez az opci� haszn�lhat� modulok bet�lt�s�re m�g\n"
-"azel�tt, hogy a rendszerind�t�si eszk�z el�rhet� lenne, vagy egy\n"
-"RAM-diszkes f�jl bet�lt�s�re hibaelh�r�t�sn�l.\n"
-"\n"
-"  - A RAM-diszk m�rete: az alap�rtelmezett RAM-diszk-m�ret �ltal�ban 4096\n"
-"b�jt. Ha nagyobb m�retet szeretne, haszn�lja ezt a lehet�s�get.\n"
-"\n"
-"  - �rhat�-olvashat�: �ltal�ban a gy�k�rpart�ci� csatlakoztat�sa el�sz�r\n"
-"csak-olvashat� m�dban t�rt�nik, hogy az aktiv�l�s el�tt ellen�rizni\n"
-"lehessen a f�jlrendszer integrit�s�t. Itt lehet fel�lb�r�lni ezt az\n"
-"elj�r�st.\n"
-"\n"
-"  - NoVideo: ha p�ld�ul egy Apple g�p videok�rty�j�t nem siker�l m�k�d�sre\n"
-"b�rni, v�lassza ezt az opci�t a \"novideo\" m�d� ind�t�shoz (nat�v\n"
-"framebuffer-t�mogat�ssal).\n"
-"\n"
-"  - Alap�rtelmez�s: az ezzel megjel�lt bejegyz�s lesz az alap�rtelmezett\n"
-"oper�ci�s rendszer, melynek kiv�laszt�s�hoz el�g megnyomni az Enter\n"
-"billenty�t a Yaboot-promptn�l. A bejegyz�s mellett megjelenik egy \"*\"\n"
-"karakter, ha �n megjelen�ti a lehet�s�gek list�j�t a Tab billenty�vel."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"A Yaboot egy rendszerind�t� program a \"NewWorld\" Macintosh g�pekhez.\n"
-"Elind�that�k vele a g�pen tal�lhat� Linux, MacOS �s MacOS X p�ld�nyok.\n"
-"�ltal�ban a telep�t�program felismeri ezeket az oper�ci�s rendszereket �s\n"
-"l�trehozza a megfelel� bejegyz�seket. De ha nem �gy t�rt�nik, akkor k�zzel,\n"
-"ut�lag is l�trehozhat� a megfelel� bejegyz�s. Gondosan ellen�rizze a\n"
-"megadott param�tereket.\n"
-"\n"
-"A Yaboot legfontosabb param�terei:\n"
-"\n"
-"  - Ind�t�si �zenet: egyszer� sz�veges �zenet, amely az ind�t�si prompt\n"
-"el�tt jelenik meg.\n"
-"\n"
-"  - Rendszerind�t�si eszk�z: ezzel adhat� meg, hogy hova ker�lj�n a\n"
-"rendszerind�t�shoz sz�ks�ges inform�ci�. �ltal�ban egy el�z�leg m�r\n"
-"l�trehozott rendszerind�t�si part�ci�ra mutat.\n"
-"\n"
-"  - K�sleltet�s Open Firmware-n�l: a LILO-t�l elt�r�en a Yaboot-n�l k�tf�le\n"
-"v�rakoz�si id� l�tezik. Az els�t m�sodpercben m�rik, �s akkor �rv�nyes,\n"
-"amikor a CD, az OF-bet�lt�s, a MacOS �s a Linux k�z�l v�lasztani lehet.\n"
-"\n"
-"  - V�rakoz�si id� rendszerind�t�skor: ez a k�sleltet�si id� a LILO-belihez\n"
-"hasonl� jelleg�. A Linux kiv�laszt�sa ut�n ennyi tizedm�sodpercig v�r majd\n"
-"a program az alap�rtelmezett kernel bet�lt�se el�tt.\n"
-"\n"
-"  - CD-r�l t�rt�nhet rendszerind�t�s?: ennek bejel�l�s�nek hat�s�ra a \"C\"\n"
-"is v�laszthat� lesz (CD-r�l val� ind�t�s) a rendszerind�t�si promptn�l.\n"
-"\n"
-"  - OF-r�l t�rt�nhet rendszerind�t�s?: ennek bejel�l�s�nek hat�s�ra az\n"
-"\"N\" is v�laszthat� lesz (Open Firmware-r�l val� ind�t�s) a\n"
-"rendszerind�t�si promptn�l.\n"
-"\n"
-"  - Az alap�rtelmezett op. rendszer?: itt lehet megadni, hogy melyik\n"
-"oper�ci�s rendszer induljon el az Open Firmware v�rakoz�si idej�nek\n"
-"letelte ut�n."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Itt a g�p�nek a k�l�nb�z� tulajdons�gait l�thatja. A telep�tett hardvert�l\n"
-"f�gg�en a k�vetkez�k jelenhetnek meg:\n"
-"\n"
-"  - \"Eg�r\": ellen�rizze a jelenlegi eg�rbe�ll�t�sokat; a m�dos�t�sukhoz\n"
-"kattintson a gombra.\n"
-"\n"
-"  - \"Billenty�zet\": ellen�rizze a jelenlegi billenty�zet-kioszt�st; a\n"
-"m�dos�t�s�hoz kattintson a gombra.\n"
-"\n"
-"  - \"Id�z�na\": a telep�t� alap�rtelmez�sben felk�n�l egy �ltala\n"
-"megfelel�nek tartott id�z�na-be�ll�t�st, amelyet az �n �ltal v�lasztott\n"
-"nyelv alapj�n hat�roz meg. Ugyan�gy, mint a billenty�zet eset�n, itt\n"
-"is elk�pzelhet�, hogy �n nem abban az orsz�gban tart�zkodik, amelyre\n"
-"a kiv�lasztott nyelv alapj�n k�vetkeztetni lehet. Ez�rt sz�ks�g lehet\n"
-"arra, hogy az \"Id�z�na\" gombra kattintson - hogy az �r�t a megfelel�\n"
-"id�z�n�hoz igaz�tsa.\n"
-"\n"
-"  - \"Nyomtat�\": nyomtat�be�ll�t�si var�zsl� elind�t�sa.\n"
-"\n"
-"  - \"Hangk�rtya\": ha a telep�t� hangk�rty�t �szlel a g�pben, az itt fog\n"
-"megjelenni. A telep�t�s sor�n nincs lehet�s�g ennek a m�dos�t�s�ra.\n"
-"\n"
-"  - \"TV-tuner k�rtya\": ha a telep�t� TV-k�rty�t �szlel a g�pben, az itt\n"
-"fog megjelenni. A telep�t�s sor�n nincs lehet�s�g ennek a m�dos�t�s�ra.\n"
-"\n"
-"  - \"ISDN-k�rtya\": ha a telep�t� ISDN-k�rty�t �szlel a g�pben, az itt fog\n"
-"megjelenni. Ha a gombra kattint, m�dos�thatja a param�tereit."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"V�lassza ki azt a lemezt, amelyet t�r�lni szeretne a Mandrake Linux\n"
-"telep�t�s�hez. Figyelem! A lemezen tal�lhat� adatok elvesznek, �s\n"
-"k�s�bb nem nyerhet�k vissza!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Kattintson az \"OK\" gombra, ha a lemezen tal�lhat� �sszes adatot\n"
-"�s part�ci�t t�r�lni szeretn�. Figyelem! Az \"OK\" gomb megnyom�sa ut�n\n"
-"nincs m�d a t�r�lt adatok �s part�ci�k vissza�ll�t�s�ra, term�szetesen\n"
-"akkor sem, ha egy Windows-part�ci� t�rl�d�tt.\n"
-"\n"
-"Kattintson a \"M�gsem\" gombra, ha nem k�v�nja v�grehajtani a m�veletet\n"
-"(a lemezen tal�lhat� part�ci�k �s adatok ez esetben nem v�ltoznak)."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Nem �rhet�k el a megfelel� kernelmodulok (hi�nyz� f�jl: %s). Ez �ltal�ban "
-"azt jelenti, hogy az ind�t�lemez nincs �sszhangban a telep�t�si m�diummal. "
-"K�sz�tsen egy �jabb ind�t�lemezt."
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Meg kell form�zni ezt is: %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"A k�vetkez� kiszolg�l�programo(ka)t v�lasztotta ki: %s\n"
-"\n"
-"\n"
-"Alap�rtelmez�s szerint ezek lesznek aktiv�lva. Nem tartozik hozz�juk ismert\n"
-"biztons�gi jav�t�s, de �jak megjelenhetnek. Ha ez bek�vetkezik, akkor min�l\n"
-"hamarabb el kell v�gezni a friss�t�st.\n"
-"\n"
-"\n"
-"Biztosan telep�teni szeretn� a kiszolg�l�programo(ka)t?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nem lehet broadcast-ot haszn�lni NIS tartom�ny n�lk�l"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr ""
-"Helyezzen egy FAT f�jlrendszerre form�zott floppyt a(z) \"%s\" meghajt�ba"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ezen a floppyn nincs FAT f�jlrendszer"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Ha fel akarja k�s�bb haszn�lni ezt a csomagkijel�l�st, akkor a telep�t�st "
-"\"linux defcfg=floppy\" param�terrel ind�tsa el."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Hiba a(z) %s f�jl olvas�sa k�zben"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"A g�p bizonyos hardverelemei speci�lis meghajt�programot ig�nyelnek.\n"
-"Inform�ci�k: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Felt�tlen�l kell lennie gy�k�rpart�ci�nak.\n"
-"Hozzon l�tre egy part�ci�t (vagy kattintson egy megl�v�re).\n"
-"Ut�na adja meg csatol�si pontnak a \"/\"-t."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Kell legal�bb egy lapoz�si (swap) part�ci�"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nincs egy lapoz�si (swap) part�ci� sem.\n"
-"\n"
-"Ennek ellen�re tov�bb szeretne l�pni?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Kell egy FAT part�ci� a /boot/efi ponthoz csatlakoztatva"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "A szabad ter�let felhaszn�l�sa"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nincs el�g szabad ter�let �j part�ci� l�trehoz�s�hoz"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "M�r l�tez� part�ci� haszn�lata"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nincs olyan m�r l�tez� part�ci�, amit haszn�lhatn�k"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "A loopback-hez a windowsos part�ci� haszn�lata"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Melyik part�ci�ra szeretn� a Linux4Win-t telep�teni?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Adja meg a m�reteket"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "A gy�k�rpart�ci� m�rete MB-ban: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "A lapoz�si (swap) part�ci� m�rete MB-ban: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "A Windows part�ci�n tal�lhat� szabad hely felhaszn�l�sa"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Melyik part�ci�t szeretn� �tm�retezni?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "A windowsos f�jlrendszer jellemz�inek kisz�m�t�sa"
-
-# msgstr "A Windows f�jlrendszer bounds kisz�m�t�sa"
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"A FAT-�tm�retez� nem tudja kezelni a part�ci�t.\n"
-"A k�vetkez� hiba keletkezett: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"A windowsos part�ci� t�lzottan t�redezett. Futtassa el�bb a \"defrag\" "
-"programot."
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"FIGYELEM!\n"
-"\n"
-"A DrakX most �tm�retezi a windowsos part�ci�t. Ez a m�velet vesz�lyes.\n"
-"Ha m�g nem tette meg, futtassa le a scandisk-et a windowsos part�ci�n\n"
-"(esetleg a defrag programot is). Ehhez ki kell l�pnie a telep�t�b�l.\n"
-"Mentse le az adatokat, majd ind�tsa �jra a telep�t�t.\n"
-"Ha biztos abban, hogy folytatni szeretn�, nyomja meg az \"OK\"-t."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Mekkora helyet szeretne fenntartani a Windowsnak itt:"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "%s part�ci�"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "A FAT �tm�retez�se nem siker�lt: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nincs �tm�retezhet� illetve loopback-k�nt haszn�lhat� FAT part�ci�, vagy "
-"nincs el�g hely"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "A teljes lemez t�rl�se"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "A Windows(TM) elt�vol�t�sa"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "T�bb merevlemeze van. Melyikre telep�tsem a Linuxot?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"MINDEN l�tez� part�ci� �s rajtuk minden adat elv�sz a(z) \"%s\" meghajt�n"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Egy�ni lemezpart�cion�l�s"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Az fdisk haszn�lata"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Most part�cion�lhat� a(z) %s.\n"
-"Ha k�sz, ne feledje elmenteni a v�ltoz�sokat a \"w\"-vel"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nincs el�g szabad hely a windowsos part�ci�n"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Nincs el�g szabad hely a telep�t�shez"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "A DrakX part�cion�l�si var�zsl�ja a k�vetkez�ket javasolja:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Part�cion�l�si hiba: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "A h�l�zatkezel�s elind�t�sa"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "A h�l�zatkezel�s le�ll�t�sa"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Hiba t�rt�nt, de nem tudom megfelel�en lekezelni.\n"
-"Folytat�s az �n saj�t felel�ss�g�re."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "A k�vetkez� csatol�si pont k�tszer van megadva: %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"N�h�ny fontos csomagot nem tudtam telep�teni.\n"
-"Ez azt jelenti, hogy vagy a CD-meghajt�, vagy a CD lemez\n"
-"hib�s. A CD lemezt egy, m�r feltelep�tett g�pen a k�vetkez�\n"
-"parancs seg�ts�g�vel tesztelheti le:\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "�dv�z�lj�k - %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nincs el�rhet� floppy-meghajt�"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "A k�vetkez� l�p�s: \"%s\"\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"A rendszer gyenge er�forr�sokkal rendelkezik. El�fordulhat, hogy probl�m�i\n"
-"lesznek a Mandrake Linux telep�t�s�vel. Ha �gy t�rt�nik, pr�b�lkozzon\n"
-"sz�veges m�d� telep�t�ssel: CD-r�l val� rendszerind�t�st k�vet�en nyomjon\n"
-"\"F1\"-et, majd �rja be azt, hogy \"text\"."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Telep�t�si m�d"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "V�lasszon a k�vetkez� telep�t�si oszt�lyok k�z�l:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Az �n �ltal kiv�lasztott csomagcsoportok �sszm�rete kb. %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ha enn�l kevesebb helyet sz�n a rendszernek,\n"
-"adjon meg egy sz�zal�kos �rt�ket.\n"
-"\n"
-"Ha alacsony �rt�ket ad meg, akkor a kiv�lasztott csomagok k�z�l\n"
-"csak a fontosabbak ker�lnek telep�t�sre; ha 100%%-ot ad meg,\n"
-"a DrakX minden kijel�lt csomagot telep�t."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"A merevlemezen csak a csomagok %d%%-�nak van hely.\n"
-"\n"
-"Ha enn�l kevesebbet k�v�n telep�teni,\n"
-"v�ltoztassa meg a kijelzett sz�zal�k �rt�k�t.\n"
-"Ha alacsony sz�zal�k-�rt�ket ad meg, a telep�t� csak a\n"
-"legfontosabb csomagokat telep�ti; ha %d%%-ot ad meg,\n"
-"akkor a lehet� legt�bb csomag ker�l telep�t�sre."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "R�szletesebben v�logathat a k�vetkez� l�p�s r�szek�nt."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Telep�tend� csomagok sz�zal�ka"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Csomag-csoportok kiv�laszt�sa"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Csomagok egyedi kiv�laszt�sa"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "�sszm�ret: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Hib�s csomag"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "N�v: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verzi�: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "M�ret: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Fontoss�g: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Nem v�laszthatja ki ezt a csomagot, mert nincs el�g hely a merevlemezen."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "A telep�t� a k�vetkez� csomagokat fogja telep�teni"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "A telep�t� a k�vetkez� csomagokat t�vol�tja el"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Ez a csomag nem jel�lhet� ki illetve nem t�r�lhet� a kijel�l�se"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ez egy k�telez� csomag, nem lehet megsz�ntetni a kijel�l�s�t"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nem t�r�lhet� ennek a csomagnak a kijel�l�se, mert m�r telep�tve van"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ezt a csomagot friss�teni kell!\n"
-"Biztos, hogy t�r�lni k�v�nja a kijel�l�s�t?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-"Nem t�r�lheti ennek a csomagnak a kijel�l�s�t. Ez a csomag friss�tend�!"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Automat. kijel�lt csomagok mutat�sa"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Telep�t�s"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Bet�lt�s/floppyra ment�s"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "A csomagkiv�laszt�s friss�t�se"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minim�lis telep�t�s"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "V�lassza ki a telep�tend� csomagokat"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Telep�t�s"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Becsl�s"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "H�tral�v� id� "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Egy kis t�relmet k�rek; a telep�t�s el�k�sz�t�se folyik"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d csomag"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "A(z) %s csomag telep�t�se"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Elfogadom"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Nem fogadom el"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Cser�lje ki a CD-t a meghajt�ban!\n"
-"\n"
-"Tegye be a(z) \"%s\" felirat� lemezt, �s nyomja meg az \"OK\" gombot.\n"
-"Ha nincs ilyen lemeze, nyomja meg a \"M�gsem\" gombot, �gy err�l a CD-r�l\n"
-"nem t�rt�nik telep�t�s."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Ett�l f�ggetlen�l folytassam?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Hiba t�rt�nt a csomagok rendez�sekor:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Hiba t�rt�nt a csomagok telep�t�sekor:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Figyelmeztet�s\n"
-"\n"
-"Olvassa el alaposan az al�bbi licencfelt�teleket. Ha valamelyik r�szt nem\n"
-"fogadja el, akkor nem kezdheti el a telep�t�st a k�vetkez� CD-r�l. Ha a\n"
-"\"Nem fogadom el\" lehet�s�get v�lasztja, akkor a telep�t�st ezen "
-"adathordoz�\n"
-"kihagy�s�val kell folytatnia.\n"
-"\n"
-"\n"
-"A k�vetkez� CD-n tal�lhat� n�h�ny szoftverkomponens nem a GPL\n"
-"(vagy m�s hasonl�) licenc al� tartozik. Mindegyik ilyen komponens\n"
-"saj�t, egy�ni licencegyezm�nnyel rendelkezik.\n"
-"Olvassa el �s fogadja el ezeket a licencfelt�teleket a komponens\n"
-"haszn�latba v�tele vagy tov�bbad�sa el�tt.\n"
-"Ezek a felt�telek �ltal�ban nem enged�lyezik a komponens tov�bbad�s�t,\n"
-"lem�sol�s�t (kiv�ve biztons�gi m�solatk�nt), forgalomba hoz�s�t,\n"
-"visszafejt�s�t, g�pi k�d� kilist�z�s�t, visszaford�t�s�t �s m�dos�t�s�t.\n"
-"B�rmelyik felt�tel be nem tart�sa eset�n a licenc �rv�ny�t veszti.\n"
-"Ha a licencegyezm�ny k�l�n nem enged�lyez t�bbet, akkor a telep�t�s\n"
-"csak egy rendszerre enged�lyezett, �s a komponens nem haszn�lhat�\n"
-"k�z�sen, a h�l�zaton. Ha pontosabb inform�ci�ra van sz�ks�ge,\n"
-"l�pjen kapcsolatba a komponens forgalmaz�j�val vagy k�sz�t�j�vel.\n"
-"A komponensek �tad�sa, r�luk m�solat k�sz�t�se harmadik f�l r�sz�re\n"
-"�ltal�ban nem enged�lyezett (bele�rtve a dokument�ci�t is).\n"
-"\n"
-"\n"
-"A k�vetkez� CD-n tal�lhat� komponensek minden joga azok szerz�it illeti\n"
-"meg, �s a szoftverterm�kekre vonatkoz� szellemi �s szerz�i jogi\n"
-"t�rv�nyek �rv�nyesek r�juk.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Hiba l�pett fel"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Biztosan ki szeretne l�pni a telep�t�b�l?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licencegyezm�ny"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Bevezet�s\n"
-"\n"
-"A tov�bbiakban az oper�ci�s rendszerre �s a Mandrake Linux disztrib�ci�ban "
-"el�rhet�\n"
-"k�l�nf�le komponensekre \"Szoftverterm�kek\" n�ven hivatkozunk. A "
-"Szoftverterm�kek k�r�be - nem\n"
-"kiz�r�lagosan - beletartoznak az oper�ci�s rendszerhez �s a Mandrake Linux "
-"disztrib�ci�\n"
-"k�l�nf�le komponenseihez kapcsol�d� programok, m�dszerek, szab�lyok �s "
-"dokument�ci�.\n"
-"\n"
-"\n"
-"1. Licencegyezm�ny\n"
-"\n"
-"K�rj�k, olvassa el jelen dokumentumot figyelmesen. Ezen dokumentum egy, a "
-"Szoftverterm�kekre\n"
-"vonatkoz� licencegyezm�ny �n �s a MandrakeSoft S.A. k�z�tt.\n"
-"Ha a Szoftverterm�keket b�rmif�le m�don telep�ti, sokszoros�tja vagy "
-"felhaszn�lja,\n"
-"azzal �n elfogadja jelen licenc kik�t�seit �s felt�teleit, tov�bb� "
-"beleegyezik abba, hogy\n"
-"azoknak teljes m�rt�kben megfelel.\n"
-"Ha �n a Licenc b�rmely r�sz�vel nem �rt egyet, akkor az �n sz�m�ra nem "
-"enged�lyezett a\n"
-"Szoftverterm�kek telep�t�se, sokszoros�t�sa illetve felhaszn�l�sa.\n"
-"B�rmely olyan k�s�rlet, amely a Szoftverterm�keknek a jelen licenc "
-"kik�t�seit�l �s felt�teleit�l\n"
-"elt�r�en val� telep�t�s�re, sokszoros�t�s�ra illetve felhaszn�l�s�ra "
-"ir�nyul, �rv�nytelen�t�\n"
-"jelleg�, �s megvonja az �nnek ezen licenc �ltal adott jogokat. A licencjogok "
-"megsz�n�s�t\n"
-"k�vet�en �nnek azonnali hat�llyal meg kell semmis�tenie a Szoftverterm�kek "
-"�sszes, �n �ltal\n"
-"birtokolt p�ld�ny�t.\n"
-"\n"
-"\n"
-"2. Korl�tozott garancia\n"
-"\n"
-"A Szoftverterm�kek �s az azokhoz tartoz� dokument�ci� \"olyan amilyen\" "
-"�llapotban �llnak\n"
-"rendelkez�sre. Garancia nincsen azokra - a t�rv�nyek �ltal enged�lyezett "
-"m�rt�kben.\n"
-"A MandrakeSoft S.A. - a t�rv�nyek �ltal enged�lyezett m�rt�kben - semmilyen "
-"k�r�lm�nyek\n"
-"k�z�tt sem vonhat� felel�ss�gre a Szoftverterm�kek haszn�lat�b�l vagy "
-"haszn�lhatatlans�g�b�l\n"
-"sz�rmaz� speci�lis, el�re nem l�tott, k�zvetlen vagy k�zvetett k�rok�rt "
-"(korl�toz�s n�lk�l\n"
-"bele�rtve a k�vetkez�ket: �zleti vesztes�g, �zleti tev�kenys�g megszakad�sa, "
-"p�nz�gyi\n"
-"vesztes�g, jogi d�jak illetve b�r�s�gi �t�letb�l sz�rmaz� b�ntet�s, vagy "
-"b�rmilyen\n"
-"sz�rmaz�kos vesztes�g); m�g abban az esetben sem, ha a MandrakeSoft S.A. "
-"t�j�koztatva lett\n"
-"az ilyesf�le k�rok bek�vetkez�s�nek lehet�s�g�r�l.\n"
-"\n"
-"KORL�TOZOTT FELEL�SS�G A BIZONYOS ORSZ�GOKBAN TILTOTT SZOFTVEREK "
-"BIRTOKL�S�VAL ILLETVE\n"
-"HASZN�LAT�VAL KAPCSOLATBAN\n"
-"\n"
-"A MandrakeSoft S.A. �s disztrib�torai - a t�rv�nyek �ltal enged�lyezett "
-"m�rt�kben - semmilyen\n"
-"k�r�lm�nyek k�z�tt sem vonhat�k felel�ss�gre az olyan - speci�lis, el�re nem "
-"l�tott, k�zvetlen\n"
-"vagy k�zvetett - k�rok�rt (korl�toz�s n�lk�l bele�rtve a k�vetkez�ket: "
-"�zleti vesztes�g,\n"
-"�zleti tev�kenys�g megszakad�sa, p�nz�gyi vesztes�g, jogi d�jak illetve "
-"b�r�s�gi\n"
-"�t�letb�l sz�rmaz� b�ntet�s, vagy b�rmilyen sz�rmaz�kos vesztes�g), amely "
-"k�rok a\n"
-"szoftverkomponensek birtokl�s�b�l vagy haszn�lat�b�l illetve a helyi "
-"t�rv�nyek �ltal\n"
-"tiltott vagy korl�tozott szoftverkomponenseknek egy Mandrake Linux c�mr�l "
-"val�\n"
-"let�lt�s�b�l sz�rmaznak.\n"
-"Ezen korl�tozott felel�ss�g vonatkozik t�bbek k�zt a Szoftverterm�kekben "
-"lev� titkos�t�\n"
-"komponensekre is.\n"
-"\n"
-"\n"
-"3. A GPL �s az ahhoz kapcsol�d� licencek\n"
-"\n"
-"A Szoftverterm�kek k�l�nb�z� szem�lyek �s int�zm�nyek �ltal k�sz�tett "
-"komponensekb�l �llnak.\n"
-"A legt�bb komponensre a GNU General Public Licence (GNU �ltal�nos Nyilv�nos "
-"Licenc; a\n"
-"tov�bbiakban: GPL) �s hasonl� licencek kik�t�sei �s felt�telei vonatkoznak.\n"
-"Ezen licencek java r�sze lehet�v� teszi a megfelel� komponensek haszn�lat�t, "
-"sokszoros�t�s�t,\n"
-"m�dos�t�s�t illetve terjeszt�s�t. B�rmely komponens haszn�lata el�tt olvassa "
-"el figyelmesen\n"
-"a komponensre vonatkoz� licenc kik�t�seit �s felt�teleit. Egy komponens "
-"licenc�re vonatkoz�\n"
-"k�rd�st nem a MandrakeSoft c�ghez, hanem az adott komponens szerz�j�hez kell "
-"ir�ny�tani.\n"
-"A MandrakeSoft S.A. �ltal fejlesztett programok a GPL licenc hat�lya al� "
-"tartoznak.\n"
-"A MandrakeSoft S.A. �ltal �rt dokument�ci�s anyagokra egy speci�lis licenc "
-"vonatkozik.\n"
-"Tov�bbi r�szletek a dokument�ci�ban.\n"
-"\n"
-"\n"
-"4. Szellemi tulajdonra vonatkoz� jogok\n"
-"\n"
-"A Szoftverterm�kek komponenseire vonatkoz� �sszes jog az adott komponensek "
-"szerz�it illeti meg,\n"
-"�s a szoftverekre vonatkoz� szellemi tulajdoni illetve szerz�i jogi "
-"(copyright) t�rv�nyek\n"
-"v�delme alatt �ll.\n"
-"A MandrakeSoft S.A. fenntartja a jogot arra, hogy m�dos�tsa illetve "
-"�talak�tsa a\n"
-"Szoftverterm�keket - teljes eg�sz�ben vagy r�szben, b�rmilyen m�don illetve "
-"b�rmilyen c�lra.\n"
-"A \"Mandrake\", a \"Mandrake Linux\" �s az azokhoz tartoz� log�k a "
-"MandrakeSoft S.A. v�djegyei.\n"
-"\n"
-"\n"
-"5. Vonatkoz� t�rv�nyek\n"
-"\n"
-"Ha jelen egyezm�ny b�rmely r�sze b�r�s�gi �t�let alapj�n semmisnek, "
-"t�rv�nytelennek vagy\n"
-"alkalmazhatatlannak van nyilv�n�tva, akkor azon r�sz jelen szerz�d�sb�l "
-"kiz�r�sra ker�l.\n"
-"Az egyezm�ny t�bbi - alkalmazhat� - r�sz�t �nnek tov�bbra is be kell "
-"tartania.\n"
-"Jelen licenc kik�t�sei �s felt�telei Franciaorsz�g t�rv�nyeinek hat�lya al� "
-"tartoznak.\n"
-"A jelen licenc kik�t�seivel kapcsolatos vit�k lez�r�s�nak legel�ny�sebb "
-"m�dja egy\n"
-"b�r�s�gon k�v�l t�rt�n� megegyez�s. V�gs� lehet�s�gk�nt a vit�s �gy a "
-"megfelel�\n"
-"p�rizsi (Franciaorsz�g) b�r�s�gra ker�l.\n"
-"Ha jelen dokumentummal kapcsolatban k�rd�se van, vegye fel a kapcsolatot a "
-"MandrakeSoft S.A.\n"
-"c�ggel.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Billenty�zet"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "V�lasszon billenty�zetkioszt�st."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Itt tal�lhat� a billenty�zetek list�ja"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Melyik telep�t�si m�dot v�lasztja?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Telep�t�s/friss�t�s"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "�j telep�t�s vagy friss�t�s?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Aj�nlott"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Szak�rt�"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Friss�t�s"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Csak a csomagok friss�t�se"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Adja meg az eg�r t�pus�t."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Eg�r port"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "V�lassza ki, hogy melyik soros porthoz csatlakozik az egere."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Eg�rgomb-emul�ci�"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "A 2. gomb emul�l�sa"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "A 3. gomb emul�l�sa"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA k�rty�k be�ll�t�sa..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE be�ll�t�sok"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nincs el�rhet� part�ci�"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Csatol�si pontok keres�se a part�ci�kon"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "V�lassza ki a csatol�si pontokat"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nem siker�lt beolvasni a part�ci�s t�bl�t, t�l rossz �llapotban van.\n"
-"Meg lehet pr�b�lni a hib�s part�ci�k alap�llapotba hoz�s�t (MINDEN ADAT\n"
-"ELV�SZ EZEKR�L!). Ha ezt nem fogadja el, akkor a DrakX nem fogja m�dos�tani\n"
-"a part�ci�s t�bl�t (a hiba: %s).\n"
-"\n"
-"T�r�lni szeretn� az �sszes part�ci�t?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"A DiskDrake nem tudta rendesen beolvasni a part�ci�s t�bl�t.\n"
-"Folytat�s az �n saj�t felel�ss�g�re."
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nincs el�g szabad hely az 1 MB-os bet�lt�programnak! A telep�t�s "
-"folytathat�, de a rendszer ind�t�s�hoz l�tre kell hozni egy rendszerind�t� "
-"part�ci�t a DiskDrake-kel."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "A gy�k�rpart�ci� nem tal�lhat�, ez�rt nem lehet elv�gezni a friss�t�st"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Gy�k�rpart�ci�"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Melyik a gy�k�rpart�ci� (/) a rendszerben?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"A part�ci�s t�bla v�ltoz�sai csak a g�p �jraind�t�sa ut�n l�pnek �rv�nybe"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "V�lassza ki a form�zand� part�ci�kat"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Ellen�rizzem a rossz blokkokat?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "A part�ci�k form�z�sa"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s f�jl l�trehoz�sa �s form�z�sa"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Betelt a lapoz�ter�let, n�velje meg a telep�t�s befejez�s�hez"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "A rendelkez�sre �ll� csomagok keres�se"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "A friss�tend� csomagok keres�se"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"A rendszeren nem maradt el�g hely a telep�t�shez vagy friss�t�shez (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Teljes (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minim�lis (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Javasolt (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"V�lasszon egy funkci�t annak megfelel�en, hogy bet�lteni k�v�n egy\n"
-"csomagkijel�l�st vagy a jelenlegi kijel�l�st szeretn� elmenteni.\n"
-"A form�tum ugyanaz, mint az automatikus telep�t�floppykn�l."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Bet�lt�s floppyr�l"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Bet�lt�s floppyr�l"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Csomagkijel�l�s"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Tegye be a csomagkijel�l�st tartalmaz� floppyt a meghajt�ba"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Ment�s floppyra"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "A kijel�lt �sszm�ret nagyobb, mint a rendelkez�sre �ll� hely"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "A telep�t�s t�pusa"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Egyetlen csomagcsoportot sem jel�lt ki.\n"
-"V�lassza ki, milyen fajta minim�lis telep�t�st szeretne."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "X-szel egy�tt"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Alapvet� dokument�ci�val (javasolt)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Val�ban minim�lis telep�t�s (urpmi sincs)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ha a felsorolt CD-k rendelkez�sre �llnak, kattintson az OK gombra.\n"
-"Ha egy CD sem �ll rendelkez�sre a felsoroltak k�z�l, akkor kattintson\n"
-"a M�gsem gombra.\n"
-"Ha a felsoroltak k�z�l n�h�ny CD hi�nyzik, t�r�lje a kijel�l�s�ket, majd\n"
-"kattintson az OK gombra."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "A(z) \"%s\" c�mk�j� CD"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "A telep�t�s el�k�sz�t�se"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"A(z) %s csomag telep�t�se\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Telep�t�s ut�ni be�ll�t�sok"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Tegye be a rendszerind�t� floppyt a(z) \"%s\" meghajt�ba"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Tegye be a friss�t�modulokat tartalmaz� floppyt a(z) \"%s\" meghajt�ba"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Most lehet�s�g ny�lik arra, hogy titkos�t�ssal foglalkoz� szoftverr�szeket\n"
-"t�lts�n le.\n"
-"\n"
-"FIGYELEM:\n"
-"\n"
-"Mivel a titkos�t�ssal foglalkoz� szoftvermodulok haszn�lat�t k�l�nb�z�\n"
-"t�rv�nyek szab�lyozz�k, kiz�r�lag a fogyaszt� �s/vagy felhaszn�l�\n"
-"felel�ss�ge eld�nteni, hogy jogosult-e let�lteni, t�rolni �s/vagy haszn�lni\n"
-"a k�rd�ses szoftvert.\n"
-"\n"
-"Tov�bb�, a fogyaszt� �s/vagy felhaszn�l� k�l�n�s figyelmet kell ford�tson a\n"
-"helyi t�rv�nyek �s rendeletek betart�s�ra. Amennyiben a fogyaszt� �s/vagy\n"
-"felhaszn�l� nem tartja be ezeket a t�rv�nyeket, s�lyos b�ntet�s szabhat� ki\n"
-"r�.\n"
-"\n"
-"A Mandrakesoft, a gy�rt�k, vagy a sz�ll�t�k semmilyen k�r�lm�nyek k�z�tt\n"
-"sem tehet�k felel�ss� azon speci�lis, k�zvetett vagy j�rul�kos k�rok\n"
-"keletkez�s��rt (bele�rtve, de nem kiz�r�lagosan, a k�vetkez�ket:\n"
-"profitvesztes�g, �zletmenetben bek�vetkezett zavarok, kereskedelmi adatok\n"
-"veszt�se, valamint b�rmilyen m�s anyagi k�r �s esetlegesen b�r�s�g �ltal\n"
-"meg�t�lt k�rt�r�t�s), amik azon szoftverek haszn�lat�b�l, birtokl�s�b�l "
-"vagy\n"
-"csak a let�lt�s�b�l erednek, amelyekhez a felhaszn�l� �s/vagy fogyaszt� "
-"ezen\n"
-"meg�llapod�s al��r�sa ut�n hozz�f�rhet.\n"
-"\n"
-"\n"
-"Ha b�rmilyen k�rd�se van a fenti szerz�d�ssel kapcsolatban, vegye fel\n"
-"a kapcsolatot a Mandrakesoft irod�j�val:\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Lehet�s�ge van arra, hogy let�ltse a disztrib�ci� kiad�sa ut�n\n"
-"friss�tett csomagokat.\n"
-"\n"
-"Ez �ltal�ban biztons�gi jav�t�sokat �s hibajav�t�sokat jelent.\n"
-"A funkci� haszn�lat�hoz sz�ks�g van egy be�ll�tott\n"
-"internetkapcsolatra.\n"
-"\n"
-"Szeretn� feltelep�teni a friss�t�seket ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Kapcsol�d�s a Mandrake Linux webkiszolg�l�j�hoz, az el�rhet� "
-"t�k�rkiszolg�l�k list�j�nak lek�rdez�se"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "V�lasszon t�k�rkiszolg�l�t, ahonnan let�lti a csomagokat"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Kapcsolatfelv�tel a t�k�rkiszolg�l�val, el�rhet� csomagok list�j�nak "
-"let�lt�se"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Melyik id�z�n�t v�lasztja?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "A g�p �r�ja GMT-id�t mutat"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatikus id�szinkroniz�ci� (NTP-vel)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP-kiszolg�l�"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "T�voli CUPS-kiszolg�l�"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nincs nyomtat�"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Van ISA hangk�rty�ja?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"A hangk�rtya be�ll�t�s�hoz futtassa az \"sndconfig\" programot a telep�t�s "
-"ut�n"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"A telep�t� nem tal�lt hangk�rty�t. Futtassa a \"harddrake\" programot a "
-"telep�t�s ut�n"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "�sszefoglal�s"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Eg�r"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Id�z�na"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Nyomtat�"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN-k�rtya"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Hangk�rtya"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-tuner k�rtya"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Helyi f�jlok"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Rendszergazdai (root) jelsz� be�ll�t�sa"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Nincs jelsz�"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ez a jelsz� t�l egyszer� (legal�bb %d karakter hossz�nak kell lennie)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Felhaszn�l�azonos�t�s"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP-alap� azonos�t�s"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP alap-DN"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP-kiszolg�l�"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS-alap� azonos�t�s"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS-tartom�ny"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS-kiszolg�l�"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Az ind�t�lemez seg�ts�g�vel a Linux rendszer akkor is elind�that�, ha a\n"
-"merevlemezr�l t�rt�n� ind�t�s nem m�k�dik. Ez p�ld�ul akkor hasznos, ha\n"
-"nem k�v�n rendszerind�t� programot telep�teni, vagy egy m�sik oper�ci�s\n"
-"rendszer elt�vol�totta a SILO-t, vagy ha a program nem tudja lekezelni a\n"
-"g�p hardver�t. Az ind�t�lemez a Mandrake helyre�ll�t�lemezzel is\n"
-"haszn�lhat�, hogy s�lyos meghib�sod�s eset�n a rendszer �llapota k�nnyen\n"
-"vissza�ll�that� legyen.\n"
-"\n"
-"Ha szeretne ind�t�lemezt k�sz�teni, helyezzen be egy floppyt az\n"
-"els� meghajt�ba �s nyomja meg az \"OK\" gombot."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Els� floppy-meghajt�"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "M�sodik floppy-meghajt�"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Kihagy�s"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Az ind�t�lemez lehet�v� teszi, hogy a Linux oper�ci�s rendszert a norm�l\n"
-"rendszerind�t� program n�lk�l is el lehessen ind�tani. Ez akkor hasznos,\n"
-"ha nem k�v�n LILO-t (illetve GRUB-ot) telep�teni a g�pre, vagy egy m�sik\n"
-"oper�ci�s rendszer let�rli a LILO-t, vagy a LILO nem m�k�dik az adott\n"
-"hardver-konfigur�ci�val. Az ind�t�lemezt haszn�lhatja a Mandrake\n"
-"helyre�ll�t�lemezzel egy�tt is, �gy sokkal egyszer�bb a helyre�ll�t�s egy\n"
-"rendszerhiba ut�n. Szeretne most ind�t�lemezt k�sz�teni a rendszerhez?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(Figyelmeztet�s: Mivel XFS f�jlrendszert haszn�l a gy�k�rpart�ci�hoz,\n"
-"ez�rt 1,44 megab�jtos floppylemezb�l val�sz�n�leg nem k�sz�thet�\n"
-"ind�t�lemez - az XFS nagym�ret� meghajt�programot ig�nyel.)"
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Nincs el�rhet� floppy-meghajt�"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"V�lassza ki azt a floppy-meghajt�t, amelyet az ind�t�lemez elk�sz�t�s�hez "
-"haszn�lni k�v�n"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Tegyen egy floppyt a(z) \"%s\" meghajt�ba"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Ind�t�lemez k�sz�l"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Rendszerbet�lt� el�k�sz�t�se"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"A g�p t�pusa feltehet�en OldWorld vagy Ismeretlen,\n"
-"ez�rt a Yaboot rendszerind�t� program nem fog m�k�dni.\n"
-"A telep�t�s folytathat�, de az ind�t�shoz\n"
-"a BootX-et kell majd haszn�lni."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Szeretn� az aboot-ot haszn�lni?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Hiba az aboot telep�t�sekor.\n"
-"Pr�b�ljam �jra a telep�t�st akkor is, ha ez esetleg t�nkreteszi az els�\n"
-"part�ci�t?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Rendszerind�t� program telep�t�se"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "A rendszerbet�lt� telep�t�se nem siker�lt. A hiba a k�vetkez�:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Lehet, hogy m�dos�tani kell az Open Firmware rendszerind�t�si eszk�z\n"
-" be�ll�t�sain a rendszerind�t� program haszn�lat�hoz. Ha �jraind�t�s ut�n\n"
-" nem jelenik meg a prompt, nyomja le a Command-Option-O-F-et indul�skor\n"
-" �s �rja be ezt: setenv boot-device %s,\\\\:tbxi\n"
-" Majd g�pelje be ezt: shut-down\n"
-"A k�vetkez� ind�t�s ut�n meg kell jelennie a promptnak."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Tegyen egy �res floppyt a(z) \"%s\" meghajt�ba"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Automatikus telep�t�floppy k�sz�t�se"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"A telep�t�s nem teljes, mivel egyes l�p�sek kimaradtak.\n"
-"\n"
-"Biztos, hogy ki akar l�pni?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratul�lunk, a telep�t�s sikeresen befejez�d�tt. Vegye ki az adathordoz�t,\n"
-"amir�l a rendszer ind�t�sa t�rt�nt (CD, floppylemez, ...), majd nyomja le\n"
-"az Enter billenty�t a rendszer �jraind�t�s�hoz.\n"
-"\n"
-"Az ehhez a Mandrake Linux verzi�hoz el�rhet� jav�t�sokr�l a k�vetkez�\n"
-"helyen olvashat:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"A rendszer be�ll�t�s�val kapcsolatban a Hivatalos Mandrake Linux\n"
-"Felhaszn�l�i K�zik�nyvben tal�l tov�bbi inform�ci�kat."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Automatikus telep�t�floppy k�sz�t�se"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Az automatikus telep�t�s ak�r teljesen automatikus is lehet,\n"
-"ebben az esetben az eg�sz merevlemez tartalm�t m�dos�thatja.\n"
-"Els�sorban akkor aj�nlott, ha m�sik g�pre is telep�teni k�v�nja\n"
-"a rendszert.\n"
-"\n"
-"Lehet�s�g van a telep�t�s �jraj�tsz�s�ra is.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatikus"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "�jraj�tsz�s"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Csomag�ssze�ll�t�s ment�se"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux telep�t�s %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"<Tab>/<Alt+Tab> l�peget�s | <Sz�k�z> kiv�laszt�s | <F12> k�vetkez� k�perny� "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "nincs \"kdesu\""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "nincs \"consolehelper\""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "V�lasszon egy f�jlt"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Speci�lis"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Alapvet�"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Egy kis t�relmet k�rek"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Inform�ci�"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "A fa kibont�sa"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "A fa �sszecsuk�sa"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "V�lt�s sima �s csoportok szerint rendezett n�zet k�z�tt"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Nem megfelel� v�laszt�s, pr�b�lja meg �jra\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Melyiket v�lasztja? (az alap�rtelmez�s: %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Kit�ltend� bejegyz�sek:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Melyiket v�lasztja? (0/1, az alap�rtelmez�s: \"%s\") "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "\"%s\" gomb: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Szeretne r�kattintani erre a gombra? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Melyiket v�lasztja? (az alap�rtelmez�s: \"%s\"%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Sok v�laszt�si lehet�s�g van (%s).\n"
-
-# Number is used to designate approximately the range of entries
-# you wish to edit because all of them would not fit on-screen.
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Jel�lje ki a szerkeszteni k�v�nt 10-es tartom�ny els� sz�m�t,\n"
-"vagy csak nyomja le az Enter billenty�t a tov�bbl�p�shez.\n"
-"Melyiket v�lasztja? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Megjegyz�s: egy c�mke m�dosult:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "�jrak�ld�s"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "cseh (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "n�met"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak-f�le"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "spanyol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "finn"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "francia"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "norv�g"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "lengyel"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "orosz"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "sv�d"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "angol (UK) billenty�zet"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "USA-billenty�zet"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "alb�n"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "�rm�ny (r�gi)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "�rm�ny (�r�g�p)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "�rm�ny (fonetikus)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "azerbajdzs�ni (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "belga"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "bolg�r (fonetikus)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "bolg�r (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "brazil (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "feh�rorosz"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "sv�jci (n�met kioszt�s)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "sv�jci (francia kioszt�s)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "cseh (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "n�met (\"dead key\" n�lk�l)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "d�n"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak-f�le (USA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak-f�le (norv�g)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak-f�le (sv�d)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "�szt"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "gr�z (\"orosz\" kioszt�s)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "gr�z (\"latin\" kioszt�s)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "g�r�g"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "magyar"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "horv�t"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "izraeli"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "izraeli (fonetikus)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "ir�ni"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "izlandi"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "olasz"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "jap�n 106-billenty�s"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "koreai billenty�zet"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "latin-amerikai"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "litv�n AZERTY (r�gi)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "litv�n AZERTY (�j)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "litv�n \"sz�msor\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "litv�n \"fonetikus\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "lett"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "maced�n"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "holland"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "lengyel (qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "lengyel (qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "portug�l"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "kanadai (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "rom�n (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "rom�n (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "orosz (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "szlov�n"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "szlov�k (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "szlov�k (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "szerb (cirill)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "thaif�ldi billenty�zet"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "tadzsik billenty�zet"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "t�r�k (hagyom�nyos \"F\" modell)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "t�r�k (modern \"Q\" modell)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "ukr�n"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "USA-billenty�zet (nemzetk�zi)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "vietn�mi \"sz�msor\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "jugoszl�v (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Jobb Alt gomb"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "A k�t Shift gomb egyszerre"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Control �s Shift gombok egyszerre"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock gomb"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl �s Alt gombok egyszerre"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt �s Shift gombok egyszerre"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "\"Menu\" gomb"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Bal \"Windows\" gomb"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Jobb \"Windows\" gomb"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "K�rk�r�s csatlakoztat�s - %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "El�sz�r t�r�lje az �sszes logikai k�tetet\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"A 2.2-es kernelekhez nincsen PCMCIA-t�mogat�s. Haszn�ljon 2.4-es kernelt."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun eg�r"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "�ltal�nos PS/2-es g�rg�s eg�r"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 gombos"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "�ltal�nos 2 gombos eg�r"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "�ltal�nos"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "G�rg�s"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "Soros"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "�ltal�nos 3 gombos eg�r"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (soros, r�gi C7 t�pus)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 gombos"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 gombos"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "egyik sem"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "nincs eg�r"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Az eg�r letesztel�se"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Az eg�r aktiv�l�s�hoz "
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOZGASSA AZ EG�RG�RG�T!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Befejez�s"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "K�vetkez� ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- El�z�"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Elfogadja?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Csatlakoz�s az internethez"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Az ADSL-en kereszt�li csatlakoz�s legt�bbsz�r PPPOE-vel t�rt�nik,\n"
-"de el�fordul a PPTP �s a DHCP is.\n"
-"A PPPOE-t v�lassza, ha nem biztos a v�laszban."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speed Touch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "DHCP haszn�lata"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "PPPOE haszn�lata"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "PPTP haszn�lata"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Melyik DHCP-klienst szeretn� haszn�lni?\n"
-"Az alap�rtelmez�s: dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nem tal�lhat� Ethernet h�l�zati k�rtya a rendszerben.\n"
-"Nem tudom be�ll�tani ezt a kapcsolatt�pust."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "H�l�zati csatol� kiv�laszt�sa"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"V�lassza ki, hogy melyik h�l�zati adapteren kereszt�l szeretne csatlakozni "
-"az internetre."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nem tal�ltam h�l�zati k�rty�t"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "H�l�zat be�ll�t�sa"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Most adja meg a g�p nev�t (ha ismeri).\n"
-"N�h�ny DHCP-kiszolg�l� csak a g�pn�v megad�sa ut�n haszn�lhat�.\n"
-"A teljes nevet kell be�rni, p�ld�ul: \"gep.vallalat.hu\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "G�pn�v"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "H�l�zatbe�ll�t� var�zsl�"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "K�ls� ISDN-modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Bels� ISDN-k�rtya"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Milyen t�pus� az ISDN-kapcsolat?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Milyen t�pus� ISDN-be�ll�t�sokat szeretne haszn�lni?\n"
-"\n"
-"  - A r�gi t�pus� be�ll�t�s az isdn4net-re �p�l. Ez igen hat�kony\n"
-"eszk�z�ket tartalmaz, de be�ll�t�sa neh�zkes, �s nem szabv�nyos.\n"
-"\n"
-"  - Az �j t�pus� be�ll�t�s k�nnyen �tl�that�, szabv�nyos,\n"
-"de kevesebb seg�deszk�z tartozik hozz�.\n"
-"\n"
-"Ha nincs kiz�r� ok, akkor ink�bb az ut�bbit v�lassza.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "�j be�ll�t�s (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "R�gi be�ll�t�s (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN-be�ll�t�sok"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Adja meg a szolg�ltat�ja nev�t.\n"
-"Ha az nincs benne a list�ban, v�lassza az \"Unlisted\"-et"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Eur�pai protokoll"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Eur�pa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "A vil�g t�bbi r�sze"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokoll a vil�g t�bbi r�sz�n \n"
-" D csatorna n�lk�l (b�relt vonal)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Melyik protokollt szeretn� haszn�lni?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Milyen t�pus� k�rty�val rendelkezik?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Nem tudom"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Amennyiben ISA k�rty�ja van, a k�vetkez� k�perny�n l�that� �rt�kek\n"
-"be�ll�t�sa l�nyeges.\n"
-"\n"
-"Ha PCMCIA k�rty�ja van, tudnia kell a k�rtya IRQ �s IO �rt�keit.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Megszak�t�s"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Folytat�s"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Milyen ISDN-k�rty�ja van?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"�rz�keltem egy ISDN PCI k�rty�t, de nem ismertem fel a t�pus�t. K�rem, "
-"v�lasszon ki egy PCI k�rty�t a k�vetkez� k�perny�n."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nem tal�ltam ISDN PCI k�rty�t. V�lasszon ki egyet a k�vetkez� k�perny�n."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "V�lassza ki, hogy melyik soros portra csatlakozik a modeme."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Modemes csatlakoz�s be�ll�t�sai"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Csatlakoz�s neve"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonsz�m"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Felhaszn�l�n�v"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Szkript-alap�"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Termin�l-alap�"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Tartom�nyn�v"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Els�dleges DNS-kiszolg�l� (nem k�telez�)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "M�sodlagos DNS-kiszolg�l� (nem k�telez�)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Bonthatja a kapcsolatot vagy �jra elv�gezheti a be�ll�t�sokat."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"A kapcsolat �jb�l be�ll�that�."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Jelenleg csatlakozva van az internethez."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Csatlakoz�s az internethez vagy a kapcsolat �jb�li be�ll�t�sa."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Jelenleg nincs csatlakozva az internethez."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Csatlakoz�s"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "A kapcsolat bont�sa"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "A kapcsolat be�ll�t�sa"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Az internetkapcsolat be�ll�t�sa"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "A(z) \"%s\" kapcsolat be�ll�t�sa k�vetkezik."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"A(z) \"%s\" kapcsolat be�ll�t�sa k�vetkezik.\n"
-"\n"
-"\n"
-"A tov�bbl�p�shez nyomja meg az OK gombot."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "H�l�zatbe�ll�t�s"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Mivel a h�l�zaton kereszt�l telep�t, a h�l�zat be�ll�t�sa m�r megt�rt�nt.\n"
-"Kattintson az OK gombra a be�ll�t�sok megtart�s�hoz, vagy a M�gsem gombra\n"
-"a h�l�zat �s az internetkapcsolat �jb�li be�ll�t�s�hoz.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"�dv�z�lj�k a h�l�zatbe�ll�t� var�zsl�ban!\n"
-"\n"
-"A h�l�zat �s az internetkapcsolat be�ll�t�sa k�vetkezik.\n"
-"T�r�lje a kijel�l�st az opci� mell�l, ha nem k�r automatikus felismer�st.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Adja meg a be�ll�tani k�v�nt profil nev�t"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Automatikus detekt�l�s"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Eszk�z�k keres�se..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Norm�l modemes kapcsolat"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detekt�lva ezen a porton: %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN-kapcsolat"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detekt�lva: %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL-kapcsolat"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detekt�lva a(z) %s csatlakoz�n"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "K�beles kapcsolat"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "k�beles kapcsolat detekt�lva"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Helyi h�l�zatos kapcsolat"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "Ethernet-k�rtya/k�rty�k detekt�lva"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "V�lassza ki a be�ll�tani k�v�nt eszk�zt"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Egyn�l t�bb internetkapcsolatot hozott l�tre.\n"
-"V�lassza ki azt, amelyiket haszn�lni szeretn�.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internetkapcsolat"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "J�jj�n l�tre a kapcsolat a rendszer indul�sakor?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "H�l�zatbe�ll�t�s"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "A h�l�zatkezel�st �jra kell ind�tani"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Hiba t�rt�nt a h�l�zatkezel�s �jraind�t�sakor: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gratul�lunk! A h�l�zat �s az internet-hozz�f�r�s be�ll�t�sa befejez�d�tt.\n"
-"\n"
-"Most �rv�nyes�tem az �j be�ll�t�sokat.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Annak elv�gz�se ut�n �rdemes �jraind�tani az X k�rnyezetet,\n"
-"hogy a g�pn�v m�dos�t�s�b�l ered� probl�m�k elker�lhet�k legyenek."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Be�ll�t�s k�zben probl�m�k mer�ltek fel.\n"
-"Tesztelje le a kapcsolatot a net_monitor vagy az mcc haszn�lat�val. Ha a "
-"kapcsolat nem m�k�dik, esetleg ind�tsa el �jra a be�ll�t�st."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"Figyelem! Ez az eszk�z m�r be lett �ll�tva internet-hozz�f�r�shez.\n"
-"El�g elfogadni a m�r megl�v� be�ll�t�sokat.\n"
-"A lenti mez�k m�dos�t�s�val fel�l lehet b�r�lni a be�ll�t�sokat."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"K�rem, adja meg a g�p IP-be�ll�t�sait.\n"
-"Minden mez�be IP-c�met �rjon pontozott decim�lis form�tumban\n"
-"(pl.: 192.169.10.11)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "A(z) %s h�l�zati eszk�z be�ll�t�sa"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (meghajt� - %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-c�m"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "H�l�zati maszk"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(BOOTP/DHCP)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatikus IP-c�m"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Az IP-c�m form�tuma 1.2.3.4 legyen"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Adja meg a g�pe nev�t.\n"
-"A teljes nevet kell be�rni, p�ld�ul: \"mybox.mylab.myco.com\".\n"
-"Megadhatja az �tj�r� (gateway) IP-c�m�t is, ha van olyan."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS-kiszolg�l�"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "�tj�r� (p�ld�ul %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "�tj�r�-eszk�z"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxy-be�ll�t�sok"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP-proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "A h�l�zati k�rtya azonos�t�j�nak k�vet�se (laptopokn�l hasznos)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "A proxy valami ilyen kell, hogy legyen: http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "A proxy valami ilyen kell, hogy legyen: ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet-be�ll�t�sok"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Kipr�b�ljuk az internetkapcsolatot most?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "A kapcsolat ellen�rz�se..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "A rendszer internetes kapcsolata �l."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Biztons�gi okokb�l lebontom a kapcsolatot."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Az internetkapcsolat feltehet�en nem akt�v.\n"
-"Pr�b�lja meg �jb�l elv�gezni a be�ll�t�st."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "A kapcsolat be�ll�t�sa"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "T�ltse ki vagy ellen�rizze az al�bbi mez�ket"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "K�rtya IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "K�rtya DMA"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "K�rtya IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "K�rtya IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "K�rtya IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Az �n saj�t telefonsz�ma"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "A szolg�ltat� neve (pl. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "A szolg�ltat� telefonsz�ma"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Els�dleges DNS-kiszolg�l� (nem k�telez�)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "M�sodlagos DNS-kiszolg�l� (nem k�telez�)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "V�lassza ki az orsz�got"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "T�rcs�z�si m�d"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Csatlakoz�si sebess�g"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "A csatlakoz�s v�rakoz�si ideje (m�sodpercben)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Felhaszn�l�n�v"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Jelsz�"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "a csatlakoztat�s nem siker�lt: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "A kiterjesztett (extended) part�ci� nem t�mogatott ezen a platformon"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"A part�ci�s t�bl�ban van egy �res tartom�ny, de nem tudom haszn�lni.\n"
-"Az egyetlen megold�s az els�dleges part�ci� �thelyez�se �gy, hogy\n"
-"a kiterjesztett part�ci�k mell� ker�lj�n az �res hely."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "A(z) %s f�jlb�l val� vissza�ll�t�s sikertelen: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Hib�s ment�sf�jl"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Hiba a(z) %s f�jl �r�sa k�zben"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Valamilyen probl�ma van a meghajt�val. \n"
-"Az adatintegrit�si teszt v�grehajt�sa nem siker�lt. \n"
-"Ez azt jelenti, hogy a lemezre val� �r�s t�nkreteheti a meghajt� \n"
-"adattartalm�t."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "nagyon fontos"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "fontos"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "er�sen aj�nlott"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "aj�nlott"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "opcion�lis"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Helyi nyomtat�"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "T�voli nyomtat�"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "T�voli CUPS-nyomtat�"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "T�voli lpd-nyomtat�"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "H�l�zati nyomtat� (TCP/socket-alap�)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT-nyomtat�"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "NetWare-nyomtat�"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "A nyomtat�eszk�z URI-ja"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "A feladat kimenet�nek �tir�ny�t�sa egy parancsba"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Ismeretlen modell"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Helyi nyomtat�k"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "T�voli nyomtat�k"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " ezen a p�rhuzamos porton: \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB nyomtat� \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", t�bbfunkci�s eszk�z ezen a p�rhuzamos porton: \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", t�bbfunkci�s eszk�z USB-n"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", t�bbfunkci�s eszk�z HP JetDirect-en"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", t�bbfunkci�s eszk�z"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", nyomtat�s ide: %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "ezen az LPD kiszolg�l�n: \"%s\", nyomtat�: \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP g�p \"%s\", port: %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "ezen a Windows kiszolg�l�n: \"%s\", megoszt�s: \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "ezen a Novell kiszolg�l�n: \"%s\", nyomtat�: \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", ezzel a paranccsal: %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "\"Nyers\" nyomtat� (nincs meghajt�program)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(itt: %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(ezen a g�pen)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Ezen a CUPS-kiszolg�l�n: \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (alap�rtelmez�s)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "V�lassza ki a nyomtat� csatlakoz�s�nak t�pus�t"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hogyan van a nyomtat� csatlakoztatva?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"A t�voli CUPS-nyomtat�kat nem kell be�ll�tani, azokat a program "
-"automatikusan felismeri."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS-be�ll�t�sok"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Adja meg a CUPS-kiszolg�l�t"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"A helyi h�l�zaton lev� CUPS kiszolg�l�k nyomtat�inak el�r�s�hez �nnek nem "
-"sz�ks�ges be�ll�tania semmif�le nyomtat�t; a CUPS kiszolg�l�k automatikusan "
-"inform�lj�k az �n g�p�t a rajtuk kereszt�l el�rhet� nyomtat�kkal "
-"kapcsolatban. Az �n g�pe �ltal ismert nyomtat�k list�ja a PrinterDrake "
-"program f�ablak�nak \"T�voli nyomtat�k\" r�sz�ben l�that�. Ha a CUPS "
-"kiszolg�l� egy m�sik h�l�zaton van, akkor meg kell adni a CUPS kiszolg�l� IP-"
-"c�m�t �s - opcion�lisan - a portsz�mot ahhoz, hogy a kiszolg�l�t�l le "
-"lehessen k�rdezni a nyomtat�inform�ci�kat. M�sk�l�nben hagyja �resen ezen "
-"mez�ket."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"A CUPS be�ll�t�sa �ltal�ban automatikusan megt�rt�nik a h�l�zat jellemz�inek "
-"megfelel�en, hogy a helyi h�l�zaton tal�lhat� CUPS-nyomtat�k haszn�lhat�k "
-"legyenek. Ha a be�ll�t�s nem megfelel�, akkor kapcsolja ki az \"Automatikus "
-"CUPS-be�ll�t�s\" opci�t �s m�dos�tsa k�zzel az /etc/cups/cupsd.conf f�jlt. "
-"Ne felejtse ezut�n �jraind�tani a CUPS szolg�ltat�st (p�ld�ul a \"service "
-"cups restart\" paranccsal)."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Az IP-c�m form�tuma 192.168.1.20 legyen"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "A portnak eg�sz sz�mnak kell lennie!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-kiszolg�l� IP-c�me"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatikus CUPS-be�ll�t�s"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Eszk�z�k keres�se..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "A portok ellen�rz�se"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Nyomtat� hozz�ad�sa"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"�dv�zli a nyomtat�be�ll�t� var�zsl�.\n"
-"\n"
-"A var�zsl� lehet�v� teszi helyi �s t�voli nyomtat�k telep�t�s�t, amelyeket "
-"ak�r err�l a g�pr�l, ak�r a h�l�zat t�bbi g�p�r�l lehet majd haszn�lni.\n"
-"\n"
-"A nyomtat� telep�t�s�hez sz�ks�ges adatokat a var�zsl� megk�rdezi �nt�l. "
-"Hozz�f�r�st ny�jt az el�rhet� nyomtat�meghajt�khoz �s a meghajt�programok "
-"be�ll�t�saihoz, tov�bb� a nyomtat�k kapcsolatt�pus�t is k�pes be�ll�tani."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Helyi nyomtat�"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"�dv�zli a nyomtat�be�ll�t� var�zsl�.\n"
-"\n"
-"A var�zsl� seg�ts�get ny�jt a sz�m�t�g�phez csatlakoztatott nyomtat�k "
-"be�ll�t�s�hoz.\n"
-"\n"
-"Csatlakoztassa a megfelel� nyomtat�kat a g�phez, �s kapcsolja be azokat. A "
-"folytat�shoz kattintson a \"K�vetkez�\" gombra; ha viszont nem k�v�nja most "
-"be�ll�tani a nyomtat�kat, akkor kattintson a \"M�gsem\" gombra.\n"
-"\n"
-"Bizonyos sz�m�t�g�pek lefagyhatnak a nyomtat�-felder�t�si folyamat k�zben. "
-"Ha felder�t�s n�lk�l k�v�n nyomtat�t telep�teni, akkor kapcsolja ki a "
-"\"Nyomtat�k automatikus felismer�se\" opci�t. Ha egy olyan t�voli nyomtat�t "
-"k�v�n be�ll�tani, amelyet a PrinterDrake nem list�z automatikusan, akkor "
-"haszn�lja a program \"Szak�rt�i m�d\" �zemm�dj�t."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Nyomtat�k automatikus felismer�se"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Gratul�lunk, a nyomtat� be�ll�t�sa sikeresen megt�rt�nt.\n"
-"\n"
-"Nyomtatni �ltal�ban az alkalmaz�sok \"F�jl\" men�j�ben lev� \"Nyomtat�s\" "
-"funkci�val lehet.\n"
-"\n"
-"Ha szeretne egy �j nyomtat�t felvenni, vagy egy meglev�t elt�vol�tani "
-"illetve �tnevezni, vagy ha szeretn� m�dos�tani az alap�rtelmez�s szerinti "
-"be�ll�t�sokat (pap�rforr�s, nyomtat�si min�s�g, ...), akkor haszn�lja a "
-"Mandrake Vez�rl�k�zpont \"Hardver\" r�sz�ben tal�lhat� \"Nyomtat�\" "
-"alkalmaz�st."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Nyomtat�k automatikus felismer�se"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"A PrinterDrake program k�pes felismerni a helyileg csatlakoztatott "
-"p�rhuzamos- illetve USB-csatlakoz�s� nyomtat�kat. Bizonyos g�peken a "
-"nyomtat�k automatikus felder�t�se lefagyaszthatja a rendszert, ami a "
-"f�jlrendszerekben hib�kat id�zhet el�. Csak akkor haszn�lja ezt a "
-"lehet�s�get, ha tiszt�ban van ezzel!\n"
-"\n"
-"Szeretne automatikus nyomtat�felder�t�st?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Automatikus detekt�l�s"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "A nyomtat� k�zi be�ll�t�sa"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Felismert eszk�z: %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Nyomtat� ezen a p�rhuzamos porton: \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB nyomtat�: \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Helyi nyomtat� nem tal�lhat�. Egy nyomtat� k�zi telep�t�s�hez adjon meg egy "
-"eszk�znevet illetve f�jlnevet a beviteli sorban (p�rhuzamos portok: /dev/"
-"lp0, /dev/lp1, ... (amelyek egyen�rt�k�ek a k�vetkez�kkel: LPT1:, "
-"LPT2:, ...), els� USB nyomtat�: /dev/usb/lp0, m�sodik USB nyomtat�: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Egy eszk�z- vagy f�jlnevet kell megadni."
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Helyi nyomtat� nem tal�lhat�.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"H�l�zati nyomtat�t csak a rendszer telep�t�s�t k�vet�en lehet telep�teni. "
-"Ehhez haszn�lja a Mandrake Vez�rl�k�zpont \"Hardver\" r�sz�ben a \"Nyomtat�"
-"\" funkci�t."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"H�l�zati nyomtat� telep�t�s�hez tegye a k�vetkez�ket: kattintson a \"M�gsem"
-"\" gombra, majd kapcsoljon \"Szak�rt�i m�d\" �zemm�dba, azut�n kattintson "
-"ism�t a \"Nyomtat� hozz�ad�sa\" gombra."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"A rendszer a k�vetkez� nyomtat�t tal�lta. Ha nem ezt szeretn� be�ll�tani, "
-"akkor adjon meg egy eszk�znevet illetve f�jlnevet a beviteli sorban."
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"A rendszer a k�vetkez� nyomtat�kat tal�lta. V�lassza ki, melyik nyomtat�t "
-"k�v�nja be�ll�tani, vagy adjon meg egy eszk�znevet illetve f�jlnevet a "
-"beviteli sorban."
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"A rendszer a k�vetkez� nyomtat�t tal�lta. A nyomtat� automatikusan "
-"be�ll�t�sra ker�l. Ha a nyomtat� helytelen�l volt felismerve, vagy ha �n "
-"szeretn� m�dos�tani annak be�ll�t�sait, akkor kapcsolja be a \"K�zi be�ll�t�s"
-"\" opci�t."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"A rendszer a k�vetkez� nyomtat�kat tal�lta. V�lassza ki, melyik nyomtat�t "
-"k�v�nja be�ll�tani. A nyomtat� automatikusan be�ll�t�sra ker�l. Ha a "
-"nyomtat� helytelen�l volt felismerve, vagy ha �n szeretn� m�dos�tani annak "
-"be�ll�t�sait, akkor kapcsolja be a \"K�zi be�ll�t�s\" opci�t."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"V�lassza ki, melyik portra van csatlakoztatva a nyomtat�, vagy adjon meg egy "
-"eszk�znevet illetve f�jlnevet a beviteli sorban"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "V�lassza ki, melyik portra van csatlakoztatva a nyomtat�."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (p�rhuzamos portok: /dev/lp0, /dev/lp1, ... (egyen�rt�k�ek ezekkel: LPT1:, "
-"LPT2:, ...), els� USB nyomtat�: /dev/usb/lp0, m�sodik USB nyomtat�: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Ki kell v�lasztania illetve meg kell adnia egy nyomtat�t vagy eszk�zt."
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "K�zi be�ll�t�s"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Az �n nyomtat�ja egy HP t�bbfunkci�s eszk�z (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 lapolvas�val)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "HPOJ csomag telep�t�se..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Az eszk�z ellen�rz�se �s a HPOJ be�ll�t�sa..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "SANE csomag telep�t�se..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Lapolvas�s az �n HP t�bbfunkci�s eszk�z�n"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "A nyomtat�port el�rhet�v� t�tele a CUPS sz�m�ra ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "A nyomtat�-adatb�zis beolvas�sa..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "T�voli lpd nyomtat� be�ll�t�sai"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"T�voli lpd nyomtat� haszn�lat�hoz meg kell adni a nyomtat�kiszolg�l� nev�t "
-"�s a nyomtat� nev�t."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "A t�voli g�p neve"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "A t�voli nyomtat� neve"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "A t�voli g�p neve nem lehet �res!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "A t�voli nyomtat� neve nem lehet �res!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) nyomtat�si be�ll�t�sok"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Ahhoz, hogy SMB-nyomtat�ra tudjon nyomtatni, meg kell adnia a "
-"nyomtat�kiszolg�l� SMB-nev�t (nem biztos, hogy ugyanaz, mint a TCP/IP-"
-"g�pn�v!) �s IP-c�m�t, a megosztott nyomtat� nev�t, �s egy megfelel� "
-"jogosults�gokkal rendelkez� felhaszn�l� nev�t, jelszav�t �s munkacsoportj�t."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Az SMB-kiszolg�l� neve"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "Az SMB-kiszolg�l� IP-c�me"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Megoszt�sn�v"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Munkacsoport"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "A kiszolg�l� nev�t vagy IP-c�m�t meg kell adni!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "A Samba megoszt�sn�v �res!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "BIZTONS�GI FIGYELMEZTET�S"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Egy windowsos n�vvel illetve jelsz�val t�rt�n� nyomtat�s be�ll�t�sa "
-"k�vetkezik. Egy, a Samba-kliens architekt�r�j�ban lev� hiba miatt a jelsz� "
-"k�dolatlanul beker�l a Samba-kliens azon parancssor�ba, amely a windowsos "
-"kiszolg�l� sz�m�ra �tadja a nyomtat�si feladatot. �gy ezen g�p minden "
-"felhaszn�l�j�nak lehet�s�ge van arra - p�ld�ul a \"ps auxwww\" parancs "
-"haszn�lat�val -, hogy megjelen�tse a jelsz�t.\n"
-"\n"
-"Javasoljuk, hogy haszn�lja a k�vetkez� lehet�s�gek valamelyik�t (azt "
-"mindenf�lek�ppen biztos�tani kell - p�ld�ul t�zfal haszn�lat�val -, hogy "
-"csak a helyi h�l�zat g�pei f�rjenek hozz� a windowsos kiszolg�l�hoz):\n"
-"\n"
-"Haszn�ljon a windowsos kiszolg�l�n egy jelsz� n�lk�li felhaszn�l�azonos�t�t "
-"(p�ld�ul: \"GUEST\") vagy egy nyomtat�si c�lokra sz�nt speci�lis azonos�t�t. "
-"Ne sz�ntesse meg a jelsz�v�delmet semmilyen szem�lyes azonos�t�n, �s a "
-"rendszergazdai azonos�t�n sem.\n"
-"\n"
-"�ll�tsa be a windowsos kiszolg�l�t �gy, hogy az LPD protokollon kereszt�l "
-"tegye el�rhet�v� a nyomtat�t. Ezut�n �ll�tsa be az err�l a g�pr�l t�rt�n� "
-"nyomtat�st \"%s\" kapcsolatt�pussal a PrinterDrake programban.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"�ll�tsa be a windowsos kiszolg�l�t �gy, hogy az IPP protokollon kereszt�l "
-"tegye el�rhet�v� a nyomtat�t. Ezut�n �ll�tsa be az err�l a g�pr�l t�rt�n� "
-"nyomtat�st \"%s\" kapcsolatt�pussal a PrinterDrake programban.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Csatlakoztassa a nyomtat�t egy linuxos kiszolg�l�hoz, �s tegye lehet�v� a "
-"windowsos g�pek sz�m�ra az ahhoz kliensk�nt val� csatlakoz�st.\n"
-"\n"
-"Val�ban folytatni szeretn� a nyomtat� ilyen m�don t�rt�n� be�ll�t�s�t?"
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare nyomtat�be�ll�t�sok"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Ahhoz, hogy NetWare nyomtat�ra tudjon nyomtatni, meg kell adnia a NetWare "
-"nyomtat�kiszolg�l� nev�t (ez nem biztos, hogy megegyezik a TCP/IP "
-"g�pn�vvel!), a nyomtat�si sor nev�t, �s egy megfelel� jogosults�gokkal "
-"rendelkez� felhaszn�l�i nevet �s jelsz�t."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Nyomtat�kiszolg�l�"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "A nyomtat�si sor neve"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Az NCP-kiszolg�l� neve �res!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Az NCP-sor neve �res!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/socket-alap� nyomtat�si be�ll�t�sok"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Ahhoz, hogy egy TCP/socket-alap� nyomtat�ra nyomtathasson, meg kell adnia a "
-"nyomtat�hoz tartoz� g�pnevet �s opcion�lisan a nyomtat� portsz�m�t. HP "
-"JetDirect kiszolg�l�kon a port sz�ma �ltal�ban 9100; m�s kiszolg�l�kon ez "
-"m�s �rt�k lehet. A hardver k�zik�nyv�ben val�sz�n�leg tal�l tov�bbi "
-"inform�ci�t."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "A nyomtat� g�pneve"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "A nyomtat� g�pneve �res!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "A nyomtat�eszk�z URI-ja"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"K�zvetlen�l megadhat� a nyomtat� el�r�si URI-ja. Az URI-nak meg kell "
-"felelnie a CUPS vagy a Foomatic el��r�sainak. Nem minden URI-t�pust t�mogat "
-"minden sorkezel�."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "�rv�nyes URI-t kell megadni."
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Minden nyomtat�hoz meg kell adni egy nevet (p�ld�ul: \"nyomtat�\"). A Le�r�s "
-"�s Hely mez�ket nem k�telez� kit�lteni, csak t�j�koztat�si c�lt szolg�lnak."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "A nyomtat� neve"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Le�r�s"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Hely"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "A nyomtat�-adatb�zis el�k�sz�t�se..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "A nyomtat� t�pusa"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"A PrinterDrake �sszehasonl�totta a nyomtat�felder�t�sb�l sz�rmaz� t�pusnevet "
-"a nyomtat�adatb�zis�ban szerepl�kkel, �s kiv�lasztotta a legmegfelel�bb "
-"t�pust. Nem biztos, hogy ez a v�laszt�s j�; f�leg akkor, ha a nyomtat� nem "
-"szerepel az adatb�zisban. Ellen�rizze, hogy helyes-e a v�laszt�s. Ha helyes, "
-"akkor kattintson \"A t�pus megfelel�\" gombra; ha viszont nem, akkor a "
-"\"T�puskiv�laszt�s k�zzel\" gombra kattintson. Az ut�bbi esetben a k�vetkez� "
-"k�perny�n lehet kiv�lasztani a nyomtat�t�pust.\n"
-"\n"
-"Az �n nyomtat�ja a PrinterDrake szerint:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "A t�pus megfelel�"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "T�puskiv�laszt�s k�zzel"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "A nyomtat� t�pus�nak kiv�laszt�sa"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Milyen t�pus� a nyomtat�?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Ellen�rizze, hogy a PrinterDrake helyesen\n"
-"hat�rozta-e meg a nyomtat� t�pus�t. Ha a\n"
-"kurzor egy nem megfelel� t�puson �ll, vagy\n"
-"a \"Nyers nyomtat�\" bejegyz�sen, akkor\n"
-"keresse meg a megfelel� t�pust a list�ban."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Ha a nyomtat�ja nem szerepel a list�ban, akkor v�lasszon egy azzal "
-"kompatibilis nyomtat�t (inform�ci�k a nyomtat� k�zik�nyv�ben) vagy egy "
-"hasonl�t."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI windowsos nyomtat� be�ll�t�sa"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"�n egy OKI windowsos l�zernyomtat� be�ll�t�s�t v�gzi. Ezek a nyomtat�k egy "
-"speci�lis kommunik�ci�s protokollt haszn�lnak, ami miatt csak akkor k�pesek "
-"m�k�dni, ha az els� p�rhuzamos portra vannak csatlakoztatva. Ha az �n "
-"nyomtat�ja egy m�sik portra vagy egy nyomtat�kiszolg�l�hoz csatlakozik, "
-"akkor tegye azt �t az els� p�rhuzamos portra, m�g miel�tt tesztoldalt "
-"nyomtatna - m�sk�l�nben a nyomtat� nem fog m�k�dni. A kapcsolatt�pus-"
-"be�ll�t�st a meghajt�program figyelmen k�v�l hagyja."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark tintasugaras nyomtat� be�ll�t�sa"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"A Lexmark �ltal biztos�tott tintasugarasnyomtat�-meghajt�programok csak "
-"helyi nyomtat�kat t�mogatnak, teh�t t�voli g�pen vagy nyomtat�kiszolg�l�n "
-"lev�ket nem. Csatlakoztassa a nyomtat�t egy helyi portra, vagy �ll�tsa azt "
-"be azon a g�pen, amelyhez az csatlakoztatva van."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Ahhoz, hogy nyomtatni tudjon a Lexmark tintasugaras nyomtat�val ezen a "
-"g�pen, sz�ks�ge lesz a Lexmark (http://www.lexmark.com/) �ltal biztos�tott "
-"megfelel� meghajt�programokra. L�togasson el az USA-beli honlapra �s "
-"kattintson a \"Drivers\" (meghajt�programok) gombra. Ezut�n v�lassza ki a "
-"megfelel� nyomtat�t�pust, majd oper�ci�s rendszerk�nt a \"Linux\"-t. A "
-"meghajt�programok RPM csomagok illetve interakt�v grafikus telep�t�st "
-"lehet�v� tev� szkriptek form�j�ban �rhet�k el. Nem sz�ks�ges a grafikus "
-"fel�leten v�gezni a be�ll�t�st. L�pjen ki a licencegyezm�ny ut�n. Ezut�n "
-"nyomtasson nyomtat�fej-igaz�t�si oldalakat \"lexmarkmaintain\"-nel, �s "
-"sz�ks�g eset�n m�dos�tsa a fej-igaz�t�si be�ll�t�sokat ezzel a programmal."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"A nyomtat� alap�rtelmez�sei\n"
-"\n"
-"Ellen�rizze, hogy a pap�rm�ret �s a tinta t�pusa illetve a nyomtat�si m�d "
-"(ha van olyan) helyesen van-e be�ll�tva. L�zernyomtat� eset�n ellen�rizze a "
-"hardverbe�ll�t�sokat is (mem�ria, duplex egys�g, extra t�lc�k). Ha a "
-"nyomtat�si min�s�get nagyon magasra �ll�tja, akkor a nyomtat�si id� "
-"jelent�sen megn�het."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "A(z) %s �rt�knek eg�sz sz�mnak kell lennie!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "A(z) %s �rt�knek sz�mnak kell lennie!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "A(z) %s �rt�k nem esik a megfelel� tartom�nyba!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Be szeretn� �ll�tani a(z) \"%s\"\n"
-"nyomtat�t alap�rtelmezettnek?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Tesztoldalak"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"V�lassza ki a kinyomtatni k�v�nt tesztoldalakat.\n"
-"Megjegyz�s: a f�nyk�pes tesztoldal kinyomtat�sa sok�ig eltarthat, s�t egyes, "
-"kev�s mem�ri�val ell�tott l�zernyomtat�kon el sem fog k�sz�lni. �ltal�ban "
-"el�g a norm�l tesztoldalt kinyomtatni."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Nem kell tesztoldal"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Nyomtat�s"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Norm�l tesztoldal"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "M�s tesztoldal (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "M�s tesztoldal (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "F�nyk�pes tesztoldal"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Ne nyomtasson tesztoldalt"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "A tesztoldal(ak) nyomtat�sa folyik..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"A tesztoldal(aka)t elk�ldtem a nyomtat�ra.\n"
-"Eltarthat egy ideig, am�g a nyomtat�s elindul.\n"
-"Nyomtat�si �llapot:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"A tesztoldal(aka)t elk�ldtem a nyomtat�ra.\n"
-"Eltarthat egy ideig, am�g a nyomtat�s elindul.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Siker�lt a nyomtat�s?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "\"Nyers\" nyomtat�"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Egy f�jl parancssorb�l (termin�lablakb�l) val� nyomtat�s�hoz haszn�lhatja a "
-"k�vetkez� parancsot: \"%s <f�jl>\" vagy egy grafikus fel�let� "
-"nyomtat�eszk�zt: \"xpp <f�jl>\" illetve \"kprinter <f�jl>\". A grafikus "
-"eszk�z�k lehet�v� teszik a nyomtat� kijel�l�s�t �s a be�ll�t�sok egyszer� "
-"m�dos�t�s�t.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ezeket a parancsokat haszn�lhatja sz�mos alkalmaz�s nyomtat�si "
-"p�rbesz�dablak�ban is (a nyomtat�si parancsot megad� mez�ben), de ott ne "
-"adjon meg f�jlnevet, mert a f�jlt az alkalmaz�s fogja biztos�tani.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"A(z) \"%s\" parancs szint�n lehet�v� teszi a be�ll�t�sok m�dos�t�s�t egy "
-"bizonyos nyomtat�si feladatra vonatkoz�an. Egyszer�en adja hozz� a k�v�nt "
-"param�tereket a parancshoz, p�ld�ul: \"%s <f�jl>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Ha szeretne egy list�t az aktu�lis nyomtat�hoz haszn�lhat� opci�kr�l, akkor "
-"olvassa el a lentebbi list�t, vagy kattintson a \"Nyomtat�si be�ll�t�sok "
-"list�ja\" gombra.%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Itt l�that�k az aktu�lis nyomtat� nyomtat�si opci�i:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Egy f�jl parancssorb�l (termin�lablakb�l) val� nyomtat�s�hoz haszn�lja a "
-"k�vetkez� parancsot: \"%s <f�jl>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ezt a parancsot haszn�lhatja sz�mos alkalmaz�s nyomtat�si p�rbesz�dablak�ban "
-"is (a nyomtat�si parancsot megad� mez�ben), de ott ne adjon meg f�jlnevet, "
-"mert a f�jlt az alkalmaz�s fogja biztos�tani.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Ha szeretne egy list�t az aktu�lis nyomtat�hoz haszn�lhat� opci�kr�l, akkor "
-"kattintson a \"Nyomtat�si be�ll�t�sok list�ja\" gombra."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Egy f�jl parancssorb�l (termin�lablakb�l) val� nyomtat�s�hoz haszn�lja a "
-"k�vetkez� parancsot: \"%s <f�jl>\" vagy ezt: \"%s <f�jl>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Az opci�k be�ll�t�s�hoz �s a nyomtat�si feladatok kezel�s�hez haszn�lhatja "
-"az \"xpdq\" grafikus fel�letet is.\n"
-"Ha munkaasztali k�rnyezetk�nt a KDE-t haszn�lja, akkor rendelkez�s�re �ll "
-"egy \"p�nikgomb\" - egy \"Nyomtat� le�ll�t�sa\" felirat� ikon a "
-"munkaasztalon, amellyel azonnali jelleggel le�ll�that� az �sszes nyomtat�si "
-"feladat. Ez p�ld�ul pap�rberagad�s eset�n hasznos.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"A(z) \"%s\" �s a(z) \"%s\" parancs lehet�v� teszi egy adott nyomtat�si "
-"feladat be�ll�t�sainak m�dos�t�s�t is. Adja hozz� a k�v�nt be�ll�t�sokat a "
-"parancshoz, p�ld�ul: \"%s <f�jl>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Bez�r�s"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Nyomtat�s/lapolvas�s ezen: \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Nyomtat�s a(z) \"%s\" nyomtat�ra"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Nyomtat�si be�ll�t�sok list�ja"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Az �n HP t�bbfunkci�s eszk�z�n automatikusan be lett �ll�tva a lapolvas�s. "
-"Lapolvas�st parancssorb�l a \"scanimage\" programmal v�gezhet (\"scanimage -"
-"d hp:%s\" a lapolvas� megad�s�hoz, ha t�bb is van); grafikus fel�leten pedig "
-"az \"xscanimage\" vagy az \"xsane\" programmal. Ha a GIMP programot "
-"haszn�lja, akkor a \"F�jl\"/\"K�ls� forr�s\" men� megfelel� men�pontj�val is "
-"v�gezhet lapolvas�st. Tov�bbi inform�ci�kat a \"man scanimage\" �s a \"man "
-"sane-hp\" parancsoknak a parancssorban val� kiad�s�val szerezhet.\n"
-"\n"
-"Ehhez az eszk�zh�z ne haszn�lja a \"scannerdrake\" programot!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Az �n HP t�bbfunkci�s eszk�z�n automatikusan be lett �ll�tva a lapolvas�s. "
-"Lapolvas�st parancssorb�l a \"ptal-hp %s scan ...\" paranccsal v�gezhet. "
-"Grafikus fel�leten �s a GIMP programban egyel�re nem lehet lapolvas�st "
-"v�gezni ezen az eszk�z�n. Tov�bbi inform�ci�kat a \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" f�jlban tal�lhat. Ha HP LaserJet 1100 vagy 1200 t�pus� "
-"nyomtat�ja van, akkor csak a lapolvas�si lehet�s�g megl�te eset�n v�gezhet "
-"lapolvas�st azon az eszk�z�n.\n"
-"\n"
-"Ehhez az eszk�zh�z ne haszn�lja a \"scannerdrake\" programot!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "A nyomtat� adatainak beolvas�sa..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "A nyomtat�be�ll�t�sok �tvitele"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"A(z) %s sorkezel� nyomtat�be�ll�t�sai �tm�solhat�k a(z) %s sorkezel� (amely "
-"az aktu�lis sorkezel�) sz�m�ra. Az �sszes be�ll�t�s (nyomtat�n�v, le�r�s, "
-"hely, kapcsol�d�si t�pus illetve alap�rtelmezett be�ll�t�sok) �t lesz v�ve, "
-"de a nyomtat�si feladatok nem ker�lnek �t.\n"
-"A k�vetkez� okok miatt nem minden nyomtat�si sor vihet� �t:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"A CUPS nem t�mogatja a Novell-alap� �s a k�tetlen parancsform�tum� "
-"nyomtat�kat.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"A PDQ csak a helyi nyomtat�kat, a t�voli LPD-nyomtat�kat �s a socket/TCP-"
-"alap� nyomtat�kat t�mogatja.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "Az LPD �s az LPRng nem t�mogatja az IPP-nyomtat�kat.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Nem vihet�k �t azon nyomtat�si sorok, amelyek nem ezzel a programmal �s nem "
-"a \"foomatic-configure\"-rel k�sz�ltek."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Tov�bb� a gy�rt� �ltal adott PPD f�jlokkal be�ll�tott nyomtat�k �s a "
-"k�zvetlen CUPS-meghajt�val ell�tott nyomtat�k be�ll�t�sai nem vihet�k �t."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Jel�lje ki az �tviend� nyomtat�kat, majd kattintson az \n"
-"\"�tvitel\" gombra."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Az �tvitel kihagy�sa"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "�tvitel"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"A(z) \"%s\" nev� nyomtat� m�r l�tezik itt: %s. \n"
-"Kattintson az \"�tvitel\" gombra annak fel�l�r�s�hoz.\n"
-"Esetleg adjon meg egy m�sik nevet vagy hagyja ki a nyomtat�t."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"A nyomtat� nev�ben csak angol bet�, sz�mjegy �s az al�h�z�s szerepelhet."
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"\"%s\" nev� nyomtat� m�r l�tezik,\n"
-"fel�l szeretn� �rni annak be�ll�t�sait?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "�j nyomtat�n�v"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s �tvitele..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"A kor�bbi alap�rtelmezett nyomtat� (\"%s\") be�ll�t�sai �tvitelre ker�ltek. "
-"Az �j %s nyomtat�si rendszerben is ez legyen az alap�rtelmezett nyomtat�?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "A nyomtat� adatainak friss�t�se..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "T�voli nyomtat� be�ll�t�sa"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "A h�l�zat elind�t�sa..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "H�l�zat be�ll�t�sa most"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "H�l�zati funkci�k nincsenek be�ll�tva"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Egy t�voli nyomtat� be�ll�t�sa k�vetkezik. Ehhez m�k�d� h�l�zati hozz�f�r�s "
-"sz�ks�ges, viszont az �n h�l�zata m�g nincsen be�ll�tva. Ha tov�bbl�p a "
-"h�l�zat be�ll�t�sa n�lk�l, akkor nem lesz lehet�s�ge a most be�ll�tand� "
-"nyomtat� haszn�lat�ra. Mit szeretne tenni?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Folytat�s a h�l�zat be�ll�t�sa n�lk�l"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"A telep�t�s k�zben v�gezhet� h�l�zatbe�ll�t�s nem ind�that� el. A g�p "
-"�jraind�t�sa ut�n vizsg�lja meg, hogy a h�l�zat el�rhet�-e, �s jav�tsa ki a "
-"be�ll�t�sokat a Mandrake Vez�rl�k�zpont \"H�l�zat �s internet\"/\"Kapcsolat"
-"\" r�sz�ben, azut�n �ll�tsa be a nyomtat�t a Mandrake Vez�rl�k�zpont "
-"\"Hardver\"/\"Nyomtat�\" r�sz�ben."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"A h�l�zati hozz�f�r�s nem volt elind�tva, �s az elind�t�sa sem lehets�ges. "
-"Ellen�rizze a be�ll�t�sokat �s a hardvert, majd pr�b�lkozzon �jra a t�voli "
-"nyomtat� be�ll�t�s�val."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "A nyomtat�si rendszer �jraind�t�sa..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "magas"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoi�s"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Nyomtat�rendszer telep�t�se a k�vetkez� biztons�gi szinten: %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Most a(z) %s nyomtat�si rendszer telep�t�se k�vetkezik egy \"%s\" biztons�gi "
-"szinten m�k�d� g�pre.\n"
-"\n"
-"Ez a nyomtat�si rendszer egy szolg�ltat�st (h�tt�rfolyamatot) futtat, amely "
-"nyomtat�si feladatokra v�r �s kezeli azokat. Ez a szolg�ltat�s el�rhet� "
-"t�voli g�pekr�l is a h�l�zaton kereszt�l, ez�rt t�mad�si fel�letet ny�jthat. "
-"Emiatt alap�rtelmez�sben csak n�h�ny kiv�lasztott szolg�ltat�s ker�l "
-"elind�t�sra ezen a biztons�gi szinten.\n"
-"\n"
-"Biztos abban, hogy be szeretne �ll�tani nyomtat�st ezen a g�pen?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "A nyomtat�si rendszer elind�t�sa a rendszer indul�sakor"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"A nyomtat�si rendszer (%s) nem ker�l automatikus elind�t�sra a g�p "
-"indul�sakor.\n"
-"\n"
-"Elk�pzelhet�, hogy az automatikus ind�t�s ki lett kapcsolva egy magasabb "
-"biztons�gi szintre val� v�lt�ssal, mivel a nyomtat�si rendszer t�mad�si "
-"fel�letet ny�jthat.\n"
-"\n"
-"Szeretn� a nyomtat�si rendszer automatikus ind�t�s�t ism�t bekapcsolni?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "A telep�tett szoftverek ellen�rz�se..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Az LPRng elt�vol�t�sa..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Az LPD elt�vol�t�sa..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "V�lassza ki a nyomtat�si rendszert"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Melyik nyomtat�si rendszert (sorkezel�t) szeretn� haszn�lni?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "A(z) \"%s\" nyomtat� be�ll�t�sa..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "A Foomatic telep�t�se..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Nyomtat�be�ll�t�sok"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "A PrinterDrake el�k�sz�t�se..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Alkalmaz�sok be�ll�t�sa..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Szeretn� be�ll�tani a nyomtat�kezel�st?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Nyomtat�si rendszer: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "PrinterDrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"A k�vetkez� nyomtat�k vannak be�ll�tva. Ha m�dos�tani szeretn� egy nyomtat� "
-"be�ll�t�sait, vagy alap�rtelmezett� k�v�n tenni egy nyomtat�t, vagy le "
-"szeretn� k�rdezni egy nyomtat� adatait, vagy egy t�voli CUPS-kiszolg�l�n "
-"lev� nyomtat�t el�rhet�v� szeretne tenni a StarOffice/OpenOffice.org program "
-"sz�m�ra, akkor kattintson dupl�n a megfelel� nyomtat�ra."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"A k�vetkez� nyomtat�k vannak be�ll�tva. Egy nyomtat� be�ll�t�sainak "
-"m�dos�t�s�hoz, egy nyomtat� alap�rtelmezett� t�tel�hez vagy az adatainak a "
-"lek�rdez�s�hez kattintson dupl�n a megfelel� nyomtat�ra."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Nyomtat�k list�j�nak friss�t�se (az �sszes el�rhet� t�voli CUPS-nyomtat� "
-"megjelen�t�se �rdek�ben)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Nyomtat�si rendszer m�dos�t�sa"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Norm�l m�d"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Szeretne be�ll�tani egy m�sik nyomtat�t?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "A nyomtat�be�ll�t�s m�dos�t�sa"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Nyomtat�: %s\n"
-"Mit szeretne megv�ltoztatni enn�l a nyomtat�n�l?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Mehet!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "A nyomtat� kapcsol�d�si t�pusa"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Nyomtat�n�v, le�r�s, hely"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "A nyomtat� gy�rt�ja, t�pusa, meghajt�programja"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "A nyomtat� gy�rt�ja, t�pusa"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Legyen ez a nyomtat� az alap�rtelmezett"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "A nyomtat� felv�tele a StarOffice-ba/OpenOffice.org-ba"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "A nyomtat� elt�vol�t�sa a StarOffice-b�l/OpenOffice.org-b�l"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Tesztoldalak nyomtat�sa"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Hogyan kell haszn�lni ezt a nyomtat�t"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Nyomtat� elt�vol�t�sa"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "A r�gi \"%s\" nyomtat� elt�vol�t�sa..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Az alap�rtelmezett nyomtat�"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "A(z) \"%s\" nyomtat� lesz ezut�n az alap�rtelmezett nyomtat�."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "A nyomtat� felv�tele a StarOffice-ba/OpenOffice.org-ba"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"A(z) \"%s\" nyomtat� sikeresen fel lett v�ve a StarOffice-ba/OpenOffice.org-"
-"ba."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-"A(z) \"%s\" nyomtat�t nem siker�lt felvenni a StarOffice-ba/OpenOffice.org-"
-"ba."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "A nyomtat� elt�vol�t�sa a StarOffice-b�l/OpenOffice.org-b�l"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"A(z) \"%s\" nyomtat� sikeresen el lett t�vol�tva a StarOffice-b�l/OpenOffice."
-"org-b�l."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-"A(z) \"%s\" nyomtat�t nem siker�lt elt�vol�tani a StarOffice-b�l/OpenOffice."
-"org-b�l."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Biztosan el szeretn� t�vol�tani a(z) \"%s\" nyomtat�t?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "A(z) \"%s\" nyomtat� elt�vol�t�sa..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy-be�ll�t�sok"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"�dv�z�lj�k a proxy-be�ll�t� seg�dprogramban!\n"
-"\n"
-"Itt lehet megadni a HTTP- �s FTP-proxy adatait,\n"
-"a bejelentkez�si inform�ci�val egy�tt\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Adja meg a HTTP-proxy adatait.\n"
-"Hagyja �resen, ha nem k�v�n HTTP-proxyt haszn�lni."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Az URL-nek �gy kell kezd�dnie: \"http:\""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "A portnak sz�mnak kell lennie"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Adja meg az FTP-proxy adatait.\n"
-"Hagyja �resen, ha nem k�v�n FTP-proxyt haszn�lni."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Az URL-nek �gy kell kezd�dnie: \"ftp:\""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Adja meg a proxy haszn�lat�hoz sz�ks�ges nevet �s jelsz�t.\n"
-"Hagyja �resen, ha erre nincs sz�ks�g."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "felhaszn�l�n�v"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "jelsz�"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "a jelsz� m�g egyszer"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "A jelszavak nem egyeznek meg, adja meg �ket m�g egyszer!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nem tudok part�ci�t hozz�adni a _form�zott_ RAID md%d bejegyz�shez"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nem tudom �rni a(z) %s f�jlt"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid sikertelen"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "Az mkraid v�grehajt�sa nem siker�lt (tal�n hi�nyzik a raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nincs el�g part�ci� a RAID %d szinthez\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Az ALSA (Advanced Linux Sound Architecture) hangrendszer elind�t�sa"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, a parancsid�z�t�."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Az apmd monitorozza a telepek �llapot�t �s napl�z a syslog-ba.\n"
-"Seg�ts�g�vel le�ll�that� a g�p, miel�tt a telep lemer�l."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Az \"at\" parancs �ltal �temezett utas�t�sokat hajtja v�gre a megadott\n"
-"id�pontban, valamint k�tegelt (batch-elt) parancsokat futtat, amikor\n"
-"a g�p terhel�se alacsony."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"A cron a szabv�nyos parancs�temez� program a UNIX oper�ci�s rendszereken.\n"
-"Seg�ts�g�vel programokat lehet futtatni megadott id�pontokban. A vixie cron\n"
-"az alap cron-n�l fejlettebb; biztons�gosabb �s t�bb be�ll�t�si lehet�s�ggel\n"
-"rendelkezik ann�l."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"A GPM eg�rt�mogat�st biztos�t a sz�veg-alap� (konzolos) linuxos\n"
-"alkalmaz�sok (mint p�ld�ul a Midnight Commander) sz�m�ra. Lehet�s�get\n"
-"ny�jt eg�rrel val� m�sol�sra illetve beilleszt�sre, valamint\n"
-"felbukkan� men�k haszn�lat�ra (konzolon)."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"A HardDrake a g�p hardver�nek ellen�rz�s�re szolg�l. Lehet�v� teszi az �j\n"
-"vagy megv�ltozott hardver megfelel� be�ll�t�s�t."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Az Apache egy WWW szerver. HTML f�jlokat �s CGI-t tesz el�rhet�v�\n"
-"a h�l�zaton kereszt�l."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Az \"internet szuperszerver szolg�ltat�s\" (inetd) felel�s sok h�l�zati\n"
-"szolg�ltat�s ind�t�s��rt, mint p�ld�ul telnet, ftp, rsh �s rlogin. Az inetd\n"
-"le�ll�t�s�val minden �ltala ir�ny�tott szolg�ltat�s le�ll."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"A csomagsz�r�s bekapcsol�sa a Linux kernel 2.2-es v�ltozat�hoz.\n"
-"Lehet�v� teszi t�zfal be�ll�t�s�t, hogy a h�l�zat fel�li t�mad�sok\n"
-"kiv�dhet�k legyenek."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ez a csomag t�lti be a billenty�zetkioszt�st, ami a\n"
-"/etc/sysconfig/keyboard -ban �ll�that� be. A be�ll�t�s megv�ltoztathat�\n"
-"a kbdconfig programmal. Ezt bekapcsolva kell hagyni a legt�bb rendszeren."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"A kernel fejl�c�nek automatikus �jragener�l�sa a /boot-ban a\n"
-"/usr/include/linux/{autoconf,version}.h alapj�n"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"A hardvereszk�z�k automatikus felismer�se �s be�ll�t�sa a rendszer "
-"indul�sakor."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"A Linuxconf elv�gez bizonyos feladatokat a rendszer ind�t�sakor,\n"
-"hogy a be�ll�t�sok konzisztensek maradjanak."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Az lpd nyomtat�szolg�ltat�s sz�ks�ges az lpr rendes m�k�d�s�hez. Az lpd\n"
-"alapj�ban v�ve egy nyomtat�szerver, elrendezi a nyomtat�sokat a k�l�nb�z�\n"
-"nyomtat�k k�z�tt."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, nagyteljes�tm�ny�, nagy rendelkez�sre �ll�s�\n"
-"kiszolg�l� kialak�t�s�hoz haszn�lhat�."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"A named (BIND) egy DNS, azaz tartom�nyn�v-kiszolg�l�, ennek seg�ts�g�vel\n"
-"feleltetik meg a g�pek az IP-c�meket �s a g�pneveket."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Fel- illetve lecsatolja (mount-olja illetve unmount-olja) a k�l�nb�z�\n"
-"h�l�zati f�jlrendszereket, mint p�ld�ul az NFS, az SMB\n"
-"(LAN Manager/Windows) �s az NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiv�lja vagy deaktiv�lja a rendszerind�t�sn�l automatikusan indul�\n"
-"h�l�zati csatol�kat."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"Az NFS egy n�pszer�, TCP/IP h�l�zaton haszn�latos f�jlmegoszt�si protokoll.\n"
-"Ez a szolg�ltat�s egy NFS-kiszolg�l�, konfigur�l�sa a /etc/exports\n"
-"f�jlon �t t�rt�nik."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Az NFS egy n�pszer�, TCP/IP h�l�zaton haszn�latos f�jlmegoszt�si protokoll.\n"
-"Ez a szolg�ltat�s az NFS lock-ol�st oldja meg."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"A NumLock automatikus bekapcsol�sa ind�t�skor a konzolon �s az\n"
-"XFree-ben."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Az OKI 4w �s az azzal kompatibilis windowsos nyomtat�k t�mogat�sa."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"A PCMCIA-t�mogat�sra �ltal�ban azoknak a laptop-felhaszn�l�knak van\n"
-"sz�ks�g�k, akik PCMCIA modemet vagy h�l�zati k�rty�t haszn�lnak a g�p�kben.\n"
-"A szolg�ltat�s nem indul el, ha nincs be�ll�tva, teh�t nyugodtan fel lehet\n"
-"telep�teni olyan g�pre is, ahol nincs r� sz�ks�g."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"A portmapper kezeli az RPC kapcsolatokat, ezekre t�bbek k�z�tt a NIS-nek �s\n"
-"az NFS-nek van sz�ks�ge. A portmap szerverre csak a (NIS vagy NFS) szerver\n"
-"g�peken van sz�ks�g."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"A Postfix egy lev�ltov�bb�t� (MTA) program, amely a leveleket tov�bb�tja\n"
-"a k�l�nb�z� g�pek k�z�tt."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Elmenti �s vissza�ll�tja a rendszer entr�pia-t�rol�j�t, �gy jobb\n"
-"v�letlensz�mokat lehet gener�lni."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"K�zvetlen el�r�s� (raw) eszk�z�k blokkeszk�z�kh�z val� rendel�se (p�ld�ul\n"
-"merevlemezes part�ci�khoz), hogy az alkalmaz�sokb�l (pl. Oracle)\n"
-"hozz�f�rhet�k legyenek."
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"A routed szolg�ltat�s lehet�v� teszi, hogy a RIP protokoll seg�ts�g�vel\n"
-"automatikusan friss�lj�n az IP protokoll �ltal haszn�lt �tv�laszt� t�bla\n"
-"(IP routing table).\n"
-"A RIP elterjedt a kis h�l�zatokon; a nagyobb, bonyolultabb h�l�zatok m�s\n"
-"�tv�laszt� protokollokat ig�nyelnek."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Az rstat protokoll seg�ts�g�vel a felhaszn�l�k inform�ci�t kaphatnak a\n"
-"(lok�lis) h�l�zaton m�k�d� g�pekr�l."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Az rusers protokoll seg�ts�g�vel a felhaszn�l�k lek�rdezhetik, hogy melyik\n"
-"g�pre ki van bejelentkezve."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Az rwho protokoll seg�ts�g�vel t�voli felhaszn�l�k kaphatnak egy list�t\n"
-"az rwho szolg�ltat�st futtat� g�p aktu�lis felhaszn�l�ir�l (olyan, mint a\n"
-"finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "A g�p hangrendszer�nek elind�t�sa"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"A syslog-on kereszt�l napl�znak a szolg�ltat�sok k�l�nb�z� napl�f�jlokba.\n"
-"A syslog haszn�lata mindig aj�nlott."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Az USB-eszk�z�k meghajt�inak bet�lt�se."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Elind�tja az X bet�t�pus-kiszolg�l�j�t (erre sz�ks�g van az XFree "
-"haszn�lat�hoz)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "V�lassza ki, mely szolg�ltat�sok induljanak el rendszerind�t�skor"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Nyomtat�s"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "F�jlmegoszt�s"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Rendszer"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "T�voli adminisztr�ci�"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Adatb�zis-kiszolg�l�"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Szolg�ltat�sok: %d aktiv�lt, %d regisztr�lt"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Szolg�ltat�sok"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "fut"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "le�ll�tva"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Szolg�ltat�sok �s d�monok"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nem �rhet� el tov�bbi inform�ci�\n"
-"err�l a szolg�ltat�sr�l."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ind�t�skor"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "K�sz�nj�k, hogy a Mandrake Linux 8.2 rendszert v�lasztotta"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "�dv�z�lj�k a Ny�lt Forr�sk�d vil�g�ban"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"A MandrakeSoft c�g sikere a Szabad Szoftver elven alapul. Az �n �j oper�ci�s "
-"rendszere a vil�gm�ret� Linux-k�z�ss�g egy�ttm�k�d� munk�j�nak eredm�nye."
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Csatlakozzon a Szabad Szoftver vil�g�hoz"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Ismerje meg a Ny�lt Forr�sk�d k�z�ss�get, �s v�ljon tagj�v�. Tanuljon, "
-"oktasson �s seg�tsen m�s felhaszn�l�kat a k�z�ss�gi (\"Community\") "
-"weblapjainkon tal�lhat� f�rumokhoz csatlakozva."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet �s �zenetk�ld�s"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"A Mandrake Linux 8.2 haszn�lat�val az internet �sszes szolg�ltat�sa "
-"el�rhet�. B�ng�sszen a weben �s n�zzen anim�ci�kat a Mozill�val vagy a "
-"Konquerorral; olvassa leveleit �s kezelje szem�lyes inform�ci�it az "
-"Evolutionnel vagy a KMaillel; ..."
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multim�dia �s grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"A Mandrake Linux 8.2 seg�ts�g�vel kihaszn�lhatja a sz�m�t�g�p multim�di�s "
-"lehet�s�geit. J�tssza le zen�it �s vide�it, n�zzen TV-t, szerkessze k�peit a "
-"leg�jabb programokkal."
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Fejleszt�s"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"A Mandrake Linux 8.2 egy nagyszer� fejleszt�rendszer. Haszn�lja fel a GNU "
-"GCC ford�t� �s a legjobb ny�lt forr�sk�d� fejleszt�k�rnyezetek erej�t."
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Vez�rl�k�zpont"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"A Mandrake Linux 8.2 Vez�rl�k�zponttal testreszabhat� �s be�ll�that� az "
-"eg�sz rendszer"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Felhaszn�l�i fel�letek"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"A Mandrake Linux 8.2 rendszerben 11 k�l�nb�z� grafikus k�rnyezet illetve "
-"ablakkezel� k�z�l lehet v�lasztani, mint p�ld�ul: GNOME 1.4, KDE 2.2.2, "
-"WindowMaker 0.8"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Kiszolg�l�programok"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Alak�tsa g�p�t kiszolg�l�v� n�h�ny eg�rkattint�ssal: web, email, t�zfal, "
-"�tv�laszt�, f�jlkiszolg�l�, nyomtat�kiszolg�l�, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "J�t�kok"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"A Mandrake Linux 8.2 a ny�lt forr�sk�d� j�t�kok legjobbj�t ny�jtja - "
-"�gyess�gi j�t�kok, akci�, k�rtyaj�t�kok, sport, strat�gia, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Szeretn� megismerni a Linuxt egyszer�en, gyorsan �s ingyenesen? "
-"MandrakeCampus nev� online oktat�k�zpontunkban ingyenes Linux-oktat�st "
-"biztos�tunk, ahol lehet�s�ge lesz a tud�s�nak letesztel�s�re is."
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Min�s�gi t�mogat�s a Linux-k�z�ss�gt�l �s a MandrakeSoftt�l. Ha komolyabban "
-"ismeri a Linuxt, akkor szak�rt�k�nt megoszthatja ismereteit m�sokkal a "
-"t�mogat�si weblapunkon."
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Tan�csad�ink rendelkez�sre �llnak az �n �sszes IT-projektj�hez - "
-"testreszabott megold�sokat k�n�lva az �n ig�nyeinek elemz�s�t k�vet�en. A "
-"MandrakeSoft komoly tapasztalataival val�di alternat�v�t ny�jt az �n c�ge "
-"sz�m�ra."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Linuxos megold�sok teljes sk�l�ja, speci�lis term�kaj�nlatok, valamint egy�b "
-"�rucikkek elektronikus �zlet�nkben"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"A MandrakeSoft professzion�lis szolg�ltat�saival illetve kereskedelmi "
-"aj�nlataival kapcsolatos tov�bbi inform�ci�k�rt l�togassa meg a k�vetkez� "
-"weblapot:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Csomagok telep�t�se..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nem tudom beolvasni a part�ci�s t�bl�t, t�l rossz �llapotban van.\n"
-"Megpr�b�lom t�r�lni a rossz part�ci�kat"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Hiba!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Nem tal�lhat� a(z) \"%s\" k�pf�jl."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Az automatikus telep�t�s be�ll�t�sai"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Egy automatikus telep�t�floppy be�ll�t�sa k�vetkezik. Ez vesz�lyes lehet, "
-"ez�rt k�r�ltekint�ssel haszn�land�.\n"
-"\n"
-"Ennek seg�ts�g�vel �jraj�tszhat� az �n �ltal ezen g�pen v�grehajtott "
-"telep�t�s - k�zben bizonyos l�p�sekn�l k�rd�seket tesz majd fel a program "
-"egyes �rt�kek m�dos�t�sa �rdek�ben.\n"
-"\n"
-"A maxim�lis biztons�g kedv��rt a part�cion�l�si �s form�z�si m�veletek soha "
-"nem lesznek automatikusan v�grehajtva, b�rmit is v�lasztott �n ezen g�p "
-"telep�t�se sor�n.\n"
-"\n"
-"K�v�nja folytatni?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Az automatikus l�p�sek be�ll�t�sai"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Adja meg mindegyik l�p�sn�l, hogy �jraj�tsz�ssal vagy k�zi vez�rl�ssel "
-"t�rt�njen"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"�dv�z�lj�k.\n"
-"\n"
-"Az automatikus telep�t�s param�terei a bal oldalon �rhet�k el"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratul�lunk!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"A floppy l�trehoz�sa sikeresen befejez�d�tt.\n"
-"A telep�t�s �jralej�tsz�sa elv�gezhet�."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Automatikus telep�t�s"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Elem hozz�ad�sa"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Az utols� elem elt�vol�t�sa"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup jelent�s \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup szolg�ltat�s - jelent�s\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup jelent�s - r�szletek\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "el�rehalad�s"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Rendszerf�jlok ment�se..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "F�jlok merevlemezes ment�se..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Felhaszn�l�i f�jlok ment�se..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Merevlemezes ment�s folyamatban..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Egy�b f�jlok ment�se..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"f�jlok k�ld�se FTP-n: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP-kapcsolati probl�ma: A ment�sf�jlok FTP-n kereszt�l t�rt�n� k�ld�se "
-"sikertelen.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Hiba lev�lk�ld�s k�zben. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "F�jlkijel�l�s"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-"V�lassza ki a f�jlokat illetve k�nyvt�rakat, majd kattintson a \"Hozz�ad�s\" "
-"gombra"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Jel�lje be azokat az opci�kat, amelyekre sz�ks�ge van.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Ezekkel a funkci�kkal a /etc k�nyvt�r �sszes f�jlja elmenthet� illetve "
-"visszat�lthet�.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Rendszerf�jlok ment�se ( /etc k�nyvt�r )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Inkrement�lis ment�s (a kor�bbi ment�sek nem lesznek fel�l�rva)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "A kritikus f�jlok kihagy�sa (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Ezzel az opci�val a /etc k�nyvt�r b�rmely �llapota\n"
-"visszat�lthet� lesz."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Jel�lje ki az �sszes felhaszn�l�t, amelynek adatait menteni szeretn�."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "A b�ng�sz�-gyorst�r kihagy�sa"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Inkrement�lis ment�sek (a kor�bbi ment�sek nem lesznek fel�l�rva)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Kijel�ltek elt�vol�t�sa"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Felhaszn�l�k"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Ment�s FTP-kapcsolaton kereszt�l"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Adja meg a g�pnevet vagy az IP-c�met."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Adja meg a k�nyvt�rt, amelybe a\n"
-" ment�sf�jlok ker�ljenek az adott g�pen."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Adja meg a felhaszn�l�i nev�t"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Adja meg a jelszav�t"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Eml�kezzen a jelsz�ra"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP-kapcsolat"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Biztons�gos kapcsolat"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Ment�s CD-re/DVD-re"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Adja meg, mennyi hely van a CD-n"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Ha CD-RW lemezt haszn�l, jel�lje be az opci�t"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Ha el�tte le k�v�nja t�r�lni a CD-RW lemezt, jel�lje be az opci�t"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Ha telep�t�s ind�t�lemezt (CD) szeretne,\n"
-" jel�lje be az opci�t."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Adja meg a CD-�r� eszk�zazonos�t�j�t,\n"
-" p�ld�ul: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Ment�s szalagra"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Adja meg a ment�shez haszn�land� eszk�znevet"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Adja meg a DrakBackup program sz�m�ra\n"
-" enged�lyezett maxim�lis m�retet"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Adja meg a k�nyvt�rt, ahova menteni kell:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Kv�ta haszn�lata a ment�sf�jlokhoz."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "H�l�zat"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CD / DVD"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Merevlemez / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "�r�nk�nt"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "naponta"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "hetente"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "havonta"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Szolg�ltat�s haszn�lata"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Adja meg a ment�sek k�zti \n"
-"id�intervallumot"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Adja meg a ment�si\n"
-"m�di�t."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Merevlemez haszn�lata szolg�ltat�ssal"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "FTP haszn�lata szolg�ltat�ssal"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"Gy�z�dj�n meg arr�l, hogy a cron szolg�ltat�s a szolg�ltat�sok k�zt van."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Lev�l k�ld�se minden ment�s ut�n ide:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Mit"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Hova"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Mikor"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Tov�bbi opci�k"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "A DrakBackup be�ll�t�sa"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "V�lassza ki, hogy hova szeretne menteni"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "merevlemezre"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "h�l�zaton kereszt�l"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "V�lassza ki, hogy mit szeretne menteni"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "A rendszer ment�se"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "A felhaszn�l�k adatainak ment�se"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Felhaszn�l� k�zi kiv�laszt�sa"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Ment�si forr�sok: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Rendszerf�jlok:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Felhaszn�l�i f�jlok:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Egy�b f�jlok:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Ment�s merevlemezre a k�vetkez� helyre: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Ment�s FTP-n kereszt�l a k�vetkez� g�pre: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t felhaszn�l�n�v: %s\n"
-"\t\t �tvonal: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Be�ll�t�sok:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tA rendszerf�jlok kihagy�sa\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\ttar �s bzip2 haszn�lata a ment�sekhez\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\ttar �s gzip haszn�lata a ment�sekhez\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Szolg�ltat�sok (%s):\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Merevlemez\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CD\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-H�l�zat FTP-n kereszt�l\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-H�l�zat SSH-n kereszt�l\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Nincs be�ll�t�s. Haszn�lja a var�zsl�t vagy a Speci�lis opci�t.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"A visszat�ltend� adatok list�ja:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"A s�r�lt adatok list�ja:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "A k�vetkez� alkalommal sz�ntesse meg a kijel�l�st vagy t�r�lje."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "A ment�sf�jlok s�r�ltek"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Az �sszes kijel�lt adat          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          vissza lett t�ltve ide: %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Be�ll�t�s visszat�lt�se       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Az egy�b f�jlok is visszat�lthet�k."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "A visszat�ltend� felhaszn�l�k (csak a legut�bbi d�tumok l�nyegesek)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Az ez el�tti rendszerf�jlok ment�se:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "adja meg a visszat�lt�si d�tumot"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Ment�s merevlemezre"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Visszat�lt�s merevlemezr�l"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Adja meg a k�nyvt�rt, ahol a ment�sek vannak"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "V�lasszon m�s m�di�t a visszat�lt�shez"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Egy�b m�dia"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Rendszer visszat�lt�se"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Felhaszn�l�k visszat�lt�se"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Egy�b adatok visszat�lt�se"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "v�lassza ki a visszat�ltend� �tvonalat (a / helyett)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "�j ment�s k�sz�t�se visszat�lt�s el�tt (csak inkrement�lis ment�shez)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Felhaszn�l�i k�nyvt�rak t�rl�se visszat�lt�s el�tt"
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Az �sszes ment�s visszat�lt�se"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Egy�ni visszat�lt�s"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Seg�ts�g"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "El�z�"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Ment�s"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Ment�sf�jlok elk�sz�t�se"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Visszat�lt�s"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "K�vetkez�"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"K�sz�tsen ment�st, miel�tt visszat�lt�st v�gezne\n"
-" (vagy pedig ellen�rizze, j�l adta-e meg az �tvonalat)."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Hiba a sendmail h�v�sa k�zben.\n"
-"  A jelent�s nem lett elk�ldve.\n"
-"  Ellen�rizze a sendmail be�ll�t�s�t."
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Telep�tend� csomagok list�ja"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Hiba a f�jl FTP-vel val� �tvitele k�zben.\n"
-" Ellen�rizze az FTP-vel kapcsolatos be�ll�t�sokat."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "V�lassza ki a visszat�ltend� adatokat..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "V�lasszon ment�si m�di�t..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "V�lassza ki a mentend� adatokat..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Be�ll�t�si f�jl nem tal�lhat�. \n"
-"Haszn�lja a var�zsl�t vagy a Speci�lis opci�t."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Fejleszt�s alatt..."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Rendszerf�jlok ment�se"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Felhaszn�l�i f�jlok ment�se"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Egy�b f�jlok ment�se"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "El�rehalad�s"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "f�jlok k�ld�se FTP-n"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "F�jlok k�ld�se..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "A CD-re �rand� adatok list�ja"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Adja meg a CD-�r� sebess�g�t"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Adja meg a CD-�r� eszk�zazonos�t�j�t (p�ld�ul: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Ha telep�t�s ind�t�lemezt (CD) szeretne, jel�lje be az opci�t."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Ment�s most a be�ll�t�sok alapj�n"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Ment�si be�ll�t�sok megtekint�se."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Be�ll�t�s a var�zsl�val"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Speci�lis be�ll�t�sok"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Ment�s most"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "DrakBackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"opci�k le�r�sa:\n"
-"\n"
-" Ebben a l�p�sben a k�vetkez�ket lehet m�dos�tani:\n"
-"\n"
-" - T�m�r�t�si m�d:\n"
-"    \n"
-"      Ha bzip2 t�m�r�t�st v�laszt, az adatok jobban lesznek\n"
-"      t�m�r�tve, mint a gzip eset�n (k�r�lbel�l 2-10 %-kal).\n"
-"      Alap�rtelmez�sben nincs bejel�lve ez az opci�, mivel ez a\n"
-"      t�m�r�t�si m�d t�bb id�t ig�nyel (k�r�lbel�l 1000 %-kal t�bbet).\n"
-" \n"
-" - Friss�t�si m�d:\n"
-"\n"
-"      Ez az opci� friss�ti a ment�st, de nem igaz�n hasznos,\n"
-"      mivel friss�t�s el�tt ki kell t�m�r�teni a ment�st.\n"
-"      \n"
-" - .backupignore m�d:\n"
-"\n"
-"      Ahogyan a CVS eset�n, a DrakBackup kihagy minden olyan\n"
-"      f�jlt, ami a megfelel� k�nyvt�rban lev� .backupignore\n"
-"      f�jlban hivatkozva van. P�lda a .backupignore f�jl\n"
-"      lehets�ges tartalm�ra: \n"
-"         *.o\n"
-"         *~\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Bizonyos, a sendmail fut�sa k�zben fell�p� hib�knak a\n"
-" postfix helytelen be�ll�t�sa az oka. A kijav�t�s �rdek�ben\n"
-" �ll�tsa be a \"myhostname\"-et vagy a \"mydomain\"-t a\n"
-" /etc/postfix/main.cf f�jlban.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"opci�k le�r�sa:\n"
-"\n"
-" - Rendszerf�jlok ment�se:\n"
-"       \n"
-"\tLehet�v� teszi a /etc k�nyvt�r ment�s�t. Ez a k�nyvt�r\n"
-"\ta be�ll�t�si f�jlokat tartalmazza. Visszat�lt�s k�zben\n"
-"\tlegyen �vatos, nehogy fel�l�rja a k�vetkez� f�jlokat:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Felhaszn�l�i f�jlok ment�se: \n"
-"\n"
-"\tLehet�v� teszi annak kiv�laszt�s�t, hogy mely \n"
-"\tfelhaszn�l�k adatait k�v�nja menteni.\n"
-"\tHogy ne legyen feleslegesen haszn�lva a lemezhely, \n"
-"\tjavasolt a b�ng�sz� gyorst�r�nak f�jljait kihagyni.\n"
-"\n"
-" - Egy�b f�jlok ment�se: \n"
-"\n"
-"\tLehet�v� teszi tov�bbi mentend� adatok kijel�l�s�t.\n"
-"\tEz a m�dszer egyel�re nem haszn�lhat� az inkrement�lis \n"
-"\tment�ssel egy�tt.\t\t\n"
-" \n"
-" - Inkrement�lis ment�sek:\n"
-"\n"
-"\tAz inkrement�lis ment�s tal�n a legrugalmasabb \n"
-"\tment�si m�dszer. Ezen m�dszer haszn�lata eset�n \n"
-"\taz els� ment�s (amely m�g teljes ment�s) ut�n \n"
-"\tm�r csak a v�ltoz�sok ker�lnek ment�sre.\n"
-"\tVisszat�lt�sn�l lehet�s�g van arra, hogy egy\n"
-"\tadott d�tumra vonatkoz�an legyenek visszat�ltve\n"
-"\taz adatok.\n"
-"\tHa ez az opci� nincs bejel�lve, akkor az �sszes kor�bbi\n"
-"\tment�s le lesz t�r�lve minden ment�si folyamat el�tt.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"a visszat�lt�s le�r�sa:\n"
-" \n"
-"Csak a legut�bbi d�tum lesz felhaszn�lva, mivel inkrement�lis \n"
-"ment�s eset�n az �sszes kor�bbi ment�st vissza kell t�lteni.\n"
-"\n"
-"Ha teh�t nem akarja visszat�lteni egy felhaszn�l� adatait, akkor\n"
-"t�r�lje az ahhoz tartoz� �sszes opci�t.\n"
-"\n"
-"M�sk�l�nben csak egyet v�laszthat ki k�z�l�k.\n"
-"\n"
-" - Inkrement�lis ment�sek:\n"
-"\n"
-"\tAz inkrement�lis ment�s tal�n a legrugalmasabb \n"
-"\tment�si m�dszer. Ezen m�dszer haszn�lata eset�n \n"
-"\taz els� ment�s (amely m�g teljes ment�s) ut�n \n"
-"\tm�r csak a v�ltoz�sok ker�lnek ment�sre.\n"
-"\tVisszat�lt�sn�l lehet�s�g van arra, hogy egy\n"
-"\tadott d�tumra vonatkoz�an legyenek visszat�ltve\n"
-"\taz adatok.\n"
-"\tHa ez az opci� nincs bejel�lve, akkor az �sszes kor�bbi\n"
-"\tment�s le lesz t�r�lve minden ment�si folyamat el�tt.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft - DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Ez a program szabad szoftver; terjeszthet� �s/vagy m�dos�that�\n"
-" a Free Software Foundation �ltal publik�lt GNU General Public\n"
-" License 2. vagy ann�l �jabb verzi�ja alapj�n.\n"
-"\n"
-" A program annak rem�ny�ben ker�l terjeszt�sre, hogy hasznosnak\n"
-" bizonyul, de GARANCIA N�LK�L; m�g a PIACK�PESS�G illetve\n"
-" egy BIZONYOS C�LRA VAL� ALKALMASS�G sincs garant�lva. Tov�bbi\n"
-" r�szletek a GNU General Public License-ben.\n"
-"\n"
-" A programmal egy�tt �nnek kapnia kellett egy p�ld�nyt a GNU General\n"
-" Public License-b�l; ha nem �gy t�rt�nt, �rjon a k�vetkez� c�mre:\n"
-" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n"
-" MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Le�r�s:\n"
-"\n"
-"  A DrakBackup program a rendszer ment�s�re haszn�lhat�.\n"
-"  Be�ll�that�, mi legyen mentve:\n"
-"\t- rendszerf�jlok\n"
-"\t- felhaszn�l�i f�jlok\n"
-"\t- egy�b f�jlok\n"
-"\tvagy a teljes rendszer �s az egy�b adatok (p�ld�ul Windows part�ci�k)\n"
-"\n"
-"  A DrakBackup a k�vetkez� helyekre k�pes menteni:\n"
-"\t- merevlemez\n"
-"\t- NFS\n"
-"\t- CD (CD-RW), DVD (automatikus rendszerind�t�ssal,\n"
-"\t  helyre�ll�t�ssal �s automatikus telep�t�ssel)\n"
-"\t- FTP\n"
-"\t- rsync\n"
-"\t- Webdav\n"
-"\t- szalag\n"
-"\n"
-"  A DrakBackup lehet�v� teszi a rendszernek egy kiv�lasztott\n"
-"  k�nyvt�rba val� visszat�lt�s�t.\n"
-"\n"
-"  Alap�rtelmez�s szerint az �sszes ment�s a /var/lib/drakbackup\n"
-"  k�nyvt�rba ker�l.\n"
-"\n"
-"  A be�ll�t�sokat tartalmaz� f�jl:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Ment�s visszat�lt�se:\n"
-"\n"
-"  Visszat�lt�s k�zben a DrakBackup elt�vol�tja az\n"
-"  eredeti k�nyvt�rt, �s ellen�rzi, hogy nincsenek-e\n"
-"  megs�r�lve a ment�seket t�rol� f�jlok. Visszat�lt�s\n"
-"  el�tt javasolt m�g egy ment�st k�sz�teni.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"Az opci�k le�r�sa:\n"
-"\n"
-"Legyen �vatos, amikor FTP-s ment�st haszn�l - csak a m�r elk�sz�lt \n"
-"ment�sf�jlokat k�ldi a program a kiszolg�l�ra.\n"
-"Ez azt jelenti, hogy jelenleg el kell k�sz�teni a ment�st a \n"
-"merevlemezre, miel�tt a kiszolg�l�ra lenne k�ldve.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Ment�s visszat�lt�s�vel kapcsolatos probl�m�k:\n"
-"\n"
-"Visszat�lt�s k�zben a DrakBackup ellen�rzi az �sszes ment�sf�jlt,\n"
-"miel�tt visszat�ltene azokb�l.\n"
-"Visszat�lt�s el�tt a program elt�vol�tja az eredeti k�nyvt�rt,\n"
-"�gy elvesznek az ott lev� adatok.\n"
-"A ment�sf�jlokat k�zzel ne m�dos�tsa.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Le�r�s:\n"
-"\n"
-"  A DrakBackup program a rendszer ment�s�re haszn�lhat�.\n"
-"  Be�ll�that�, mi legyen mentve:\n"
-"\t- rendszerf�jlok\n"
-"\t- felhaszn�l�i f�jlok\n"
-"\t- egy�b f�jlok\n"
-"\tvagy a teljes rendszer �s az egy�b adatok (p�ld�ul Windows part�ci�k)\n"
-"\n"
-"  A DrakBackup a k�vetkez� helyekre k�pes menteni:\n"
-"\t- merevlemez\n"
-"\t- NFS\n"
-"\t- CD (CD-RW), DVD (automatikus rendszerind�t�ssal,\n"
-"\t  helyre�ll�t�ssal �s automatikus telep�t�ssel)\n"
-"\t- FTP\n"
-"\t- rsync\n"
-"\t- Webdav\n"
-"\t- szalag\n"
-"\n"
-"  A DrakBackup lehet�v� teszi a rendszernek egy kiv�lasztott\n"
-"  k�nyvt�rba val� visszat�lt�s�t.\n"
-"\n"
-"  Alap�rtelmez�s szerint az �sszes ment�s a /var/lib/drakbackup\n"
-"  k�nyvt�rba ker�l.\n"
-"\n"
-"  A be�ll�t�sokat tartalmaz� f�jl:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Ment�s visszat�lt�se:\n"
-"\n"
-"  Visszat�lt�s k�zben a DrakBackup elt�vol�tja az\n"
-"  eredeti k�nyvt�rt, �s ellen�rzi, hogy nincsenek-e\n"
-"  megs�r�lve a ment�seket t�rol� f�jlok. Visszat�lt�s\n"
-"  el�tt javasolt m�g egy ment�st k�sz�teni.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "A(z) %s telep�t�se nem siker�lt a k�vetkez� hiba miatt:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Telep�tett bet�t�pusok keres�se"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Telep�tett bet�t�pusok kijel�l�s�nek t�rl�se"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "az �sszes bet�t�pus vizsg�lata"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "bet�t�pus nem tal�lhat�"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "k�sz"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "a csatlakoztatott part�ci�kon bet�t�pus nem tal�lhat�"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "J� bet�t�pusok ism�telt kiv�laszt�sa"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "bet�t�pus nem tal�lhat�\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Bet�t�pusok keres�se a telep�tettek k�zt"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Bet�t�pus-m�sol�s"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "TrueType bet�t�pusok telep�t�se"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "k�rem, v�rjon: ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "TrueType-telep�t�s k�sz"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Bet�t�pus-konvert�l�s"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "type1inst k�sz�t�se"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript-hivatkoz�s"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf bet�t�pusok konvert�l�sa"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm bet�t�pusok konvert�l�sa"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "�tmeneti f�jlok elhagy�sa"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "XFS �jraind�t�sa"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Bet�t�pus-f�jlok elhagy�sa"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "XFS �jraind�t�sa"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Miel�tt b�rmilyen bet�t�pus telep�t�s�be kezdene, bizonyosodjon meg arr�l, "
-"hogy van joga azok telep�t�s�hez illetve haszn�lat�hoz.\n"
-"\n"
-"-A bet�t�pusokat a szokott m�don telep�theti. Bizonyos hib�s bet�t�pusok "
-"lefagyaszthatj�k az X kiszolg�l�t."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Bet�t�pusok import�l�sa"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Windowsos bet�t�pusok"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Bet�t�pusok elt�vol�t�sa"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Speci�lis opci�k"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Bet�t�pus-lista"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "V�lassza ki, mely alkalmaz�sok fogj�k haszn�lni a bet�t�pusokat:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "AbiWord"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "�ltal�nos nyomtat�k"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"V�lassza ki a bet�t�pus-f�jlt vagy -k�nyvt�rt, majd kattintson a \"Hozz�ad�s"
-"\" gombra"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Telep�t�si lista"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "kattintson ide, ha biztos benne"
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "ide, ha nem"
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Kijel�l�sek megsz�ntet�se"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Mindent kijel�l"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Lista elt�vol�t�sa"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Tesztel�s"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Bet�t�pusok m�sol�sa a rendszerbe"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Bet�t�pusok telep�t�se �s konvert�l�sa"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Telep�t�s ut�n"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "A rendszerben tal�lhat� bet�t�pusok elt�vol�t�sa"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Elt�vol�t�s ut�n"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Internetkapcsolat megoszt�sa"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Az internetkapcsolat megoszt�sa enged�lyezve van"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Az internetkapcsolat megoszt�sa m�r megt�rt�nt.\n"
-"A megosztott kapcsolat haszn�lhat�.\n"
-"\n"
-"Mit szeretne tenni?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "Letilt�s"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "M�gsem"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "Be�ll�t�s �jb�l"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "A kiszolg�l�k letilt�sa..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Az internetkapcsolat-megoszt�s letilt�sa megt�rt�nt."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Az internetkapcsolat megoszt�sa nincs enged�lyezve"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Az internetkapcsolat megoszt�sa kor�bban m�r megt�rt�nt.\n"
-"A megosztott kapcsolat haszn�lata nincs enged�lyezve.\n"
-"\n"
-"Mit szeretne tenni?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "Enged�lyez�s"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "A kiszolg�l�k enged�lyez�se..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Az internetkapcsolat megoszt�sa most m�r enged�lyezett."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Az internetkapcsolat megoszt�s�nak be�ll�t�sa k�vetkezik.\n"
-"Ennek seg�ts�g�vel a helyi h�l�zat m�s g�pei is el�rhetik az internetet\n"
-"ezen a kapcsolaton kereszt�l.\n"
-"\n"
-"Megjegyz�s: a helyi h�l�zat (LAN) haszn�lat�hoz legal�bb egy h�l�zati\n"
-"csatol�k�rtya sz�ks�ges."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "%s csatol� (a(z) %s modul felhaszn�l�s�val)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "%s csatol�"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nem tal�lhat� h�l�zati csatol�k�rtya a sz�m�t�g�pben."
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nem tal�lhat� Ethernet h�l�zati adapter a rendszerben. Futtassa a "
-"hardverkonfigur�ci�s eszk�zt."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "H�l�zati csatol�fel�let"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Egyetlen be�ll�tott h�l�zati csatol�k�rtya tal�lhat� a g�pben:\n"
-"\n"
-"%s\n"
-"\n"
-"A helyi h�l�zat param�tereit ehhez a csatol�hoz fogom be�ll�tani."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "V�lassza ki, hogy milyen k�rty�val csatlakozik a helyi h�l�zathoz."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "H�l�zati csatol� m�r be lett �ll�tva"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Figyelmeztet�s: a h�l�zati k�rtya (%s) m�r be van �ll�tva.\n"
-"\n"
-"Szeretne automatikus �jrakonfigur�l�st?\n"
-"\n"
-"Elv�gezheti �n is k�zzel, de csak ha biztos abban, hogy mit tesz."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatikus �jrakonfigur�l�s"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Jelenlegi csatol�be�ll�t�s megjelen�t�se"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"\"%s\" jelenlegi be�ll�t�sa:\n"
-"\n"
-"H�l�zat: %s\n"
-"IP-c�m: %s\n"
-"IP-tulajdons�gok: %s\n"
-"Meghajt�: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Megtarthat� a jelenlegi be�ll�t�s, ekkor felt�telezve lesz, hogy m�r "
-"megt�rt�nt egy DHCP kiszolg�l� be�ll�t�sa. Ebben az esetben ellen�rizze, "
-"hogy helyesen lett-e meghat�rozva a helyi h�l�zathoz haszn�lt C oszt�ly� "
-"tartom�ny. Nem t�rt�nik �jrakonfigur�l�s, �s a DHCP kiszolg�l� be�ll�t�sai "
-"sem ker�lnek m�dos�t�sra.\n"
-"\n"
-"�jra is konfigur�lhat� a csatol� illetve be�ll�that� egy DHCP kiszolg�l�.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C oszt�ly� helyi h�l�zat"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "DHCP kiszolg�l� IP-c�me"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Csatol� �s DHCP kiszolg�l� �jrakonfigur�l�sa"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "A helyi h�l�zati c�m nem \".0\"-ra v�gz�dik, kil�pek."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "H�l�zati c�mhib�t �szleltem az aktu�lis konfigur�ci�ban: %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "A t�zfal be�ll�t�sait siker�lt felismerni."
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Figyelem! Egy m�r l�tez� t�zfalbe�ll�t�st tal�ltam. N�h�ny apr�bb "
-"m�dos�t�sra sz�ks�g lehet a telep�t�s elv�gz�se ut�n."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Be�ll�t�s..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Be�ll�t�szkriptek, szoftvertelep�t�s, szerverek ind�t�sa..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "A(z) %s csomag telep�t�s�n�l hiba t�rt�nt"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"A be�ll�t�s sikeresen befejez�d�tt.\n"
-"Az internetkapcsolat most m�r b�rmelyik, a helyi h�l�zaton tal�lhat� g�ppel "
-"megoszthat� az automatikus h�l�zati c�mkioszt�s (DHCP) seg�ts�g�vel."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "A megoszt�s m�r megt�rt�nt, de a kapcsolat haszn�lata le van tiltva."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "A megoszt�s m�r megt�rt�nt, a kapcsolat haszn�lhat�."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Az internetkapcsolat megoszt�sa m�g nem t�rt�nt meg."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Az internetkapcsolat megoszt�s�nak be�ll�t�sa"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"�dv�z�lj�k az internetkapcsolat-megoszt�s be�ll�t�programj�ban!\n"
-"\n"
-"%s\n"
-"\n"
-"Kattintson a Be�ll�t�s gombra a be�ll�t�svar�zsl� elind�t�s�hoz."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "H�l�zatbe�ll�t�s (%d csatol�)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Profil t�rl�se..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "A t�r�lni k�v�nt profil:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "�j profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"A l�trehozand� profil neve (az �j profil az aktu�lis pontos m�solata lesz):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "G�pn�v: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internet-hozz�f�r�s"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "T�pus:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "�tj�r� (gateway):"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Csatol�:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "�llapot:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Kis t�relmet"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Az internet-hozz�f�r�s be�ll�t�sa..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "A helyi h�l�zat be�ll�t�sa"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Meghajt�"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Csatol�"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "�llapot"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "A helyi h�l�zat be�ll�t�sa..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "A var�zsl� ind�t�s�hoz kattintson ide ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Var�zsl�..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Alkalmaz�s"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Egy kis t�relmet k�rek, v�grehajtom a k�rt m�dos�t�sokat"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Csatlakozva"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nincs csatlakozva"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Csatlakoz�s..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "A kapcsolat bont�sa..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Figyelmeztet�s: egy m�sik internetkapcsolat is l�tezik, esetleg a h�l�zatot "
-"haszn�lva"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Egyetlen csatol� sincs be�ll�tva.\n"
-"A be�ll�t�s elv�gz�s�hez kattintson a \"Be�ll�t�s\" gombra."
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "A helyi h�l�zat be�ll�t�sa"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "%s csatol�: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Rendszerind�t�si protokoll"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Automatikus ind�t�s"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP-kliens"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktiv�l�s most"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktiv�l�s most"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Ez a csatol� m�g nem lett be�ll�tva.\n"
-"A be�ll�t�var�zsl�t a f�ablakban ind�thatja el."
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nincs be�ll�tva egyetlen internetkapcsolat sem.\n"
-"Kapcsolat l�trehoz�s�hoz kattintson a \"Be�ll�t�s\" gombra."
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internetkapcsolat be�ll�t�sa"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internetkapcsolat be�ll�t�sa"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "A csatlakoz�s t�pusa: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Param�terek"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "�tj�r� (gateway)"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet-k�rtya"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-kliens"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Biztons�gi szint be�ll�t�sa"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Vez�rl�k�zpont"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "V�lassza ki a haszn�lni k�v�nt eszk�zt"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (k�bel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (sug�rz�s)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (k�bel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (k�bel-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "K�na (sug�rz�s)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Jap�n (sug�rz�s)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Jap�n (k�bel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Kelet-Eur�pa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "�rorsz�g"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Nyugat-Eur�pa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Ausztr�lia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "�j-Z�land"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "D�l-Afrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argent�na"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Adja meg\n"
-"a TV-norm�t �s az orsz�got"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV-norma:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Ter�let:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "TV-csatorn�k keres�se..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "TV-csatorn�k keres�se"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "TV-k�rtya nem tal�lhat�."
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"TV-k�rtya nem tal�lhat� a g�pben. Ellen�rizze, hogy val�ban van-e a g�pben "
-"Linux �ltal t�mogatott TV-k�rtya, �s hogy megfelel�en van-e beszerelve a "
-"g�pbe.\n"
-"\n"
-"\n"
-"A Mandrake-f�le hardver-adatb�zis a k�vetkez� helyen tal�lhat�:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "haszn�lat: keyboarddrake [--expert] [billenty�zet]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "V�lasszon billenty�zetkioszt�st."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Parancs�rtelmez�ben a BackSpace billenty� \"Delete\"-et jelentsen?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Cser�lje ki a CD lemezt"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Helyezze be a telep�t�si CD-t a meghajt�ba �s nyomja meg az OK gombot.\n"
-"Ha nincs ilyen lemeze, akkor nyomja meg a \"M�gsem\" gombot a friss�t�s\n"
-"kihagy�s�hoz."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Nem siker�lt elind�tani a friss�t�st!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "A m�dos�t�s megt�rt�nt, de az �rv�nybe l�p�s�hez ki kell jelentkezni"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Csak a kijel�lt napot jelen�tse meg"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/F�jl/�_j"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/F�jl/_Megnyit�s"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/F�jl/M_ent�s"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/F�jl/Ment�s m�s_k�nt"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/F�jl/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Be�ll�t�sok"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Be�ll�t�sok/Pr�ba"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Seg�ts�g"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Seg�ts�g/_N�vjegy..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Felhaszn�l�"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "�zenetek"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Rendszernapl�"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Mandrake eszk�z�k - magyar�zat"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "keres�s"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Napl�figyel�"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Be�ll�t�sok"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "ezzel egyez�"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "de ezzel nem egyez�"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "V�lasszon egy f�jlt"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Napt�r"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "A f�jl tartalma"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Email/SMS-figyelmeztet�s"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "a f�jl elemz�se folyamatban: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Email/SMS-figyelmeztet�s be�ll�t�sai"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"�dv�z�lj�k az email/SMS be�ll�t�programban.\n"
-"\n"
-"A programmal be�ll�that� a figyelmeztet�sek k�ld�se.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "szolg�ltat�sbe�ll�t�s"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"A rendszer figyelmeztet�st k�ld, ha a kijel�lt szolg�ltat�sok valamelyike "
-"nem fut"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "terhel�sbe�ll�t�s"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "A rendszer figyelmeztet�st k�ld, ha a terhel�s ezen �rt�kn�l magasabb"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "figyelmeztet�s be�ll�t�sa"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "A figyelmeztet�s m�dj�nak be�ll�t�sa"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Ment�s m�sk�nt..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Adja meg az eg�r t�pus�t."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nem tal�ltam serial_usb-t\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emul�ljam a harmadik gombot?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "\"%s\" tal�lhat� itt: \"%s\", k�v�nja be�ll�tani ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "V�lasszon egy lapolvas�t"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Ez a lapolvas� nincs t�mogatva: %s"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"A ScannerDrake nem tal�lta meg az �n \"%s\" lapolvas�j�t.\n"
-"V�lassza ki, melyik eszk�zh�z csatlakozik a lapolvas�."
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "v�lassza ki az eszk�zt"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"A(z) \"%s\" lapolvas�t a PrinterDrake programmal lehet be�ll�tani.\n"
-"A PrinterDrake-et a Mandrake Vez�rl�k�zpont \"Hardver\" r�sz�ben ind�thatja "
-"el."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Az �n \"%s\" lapolvas�ja be�ll�t�sra ker�lt.\n"
-"Dokumentumok beolvas�s�ra haszn�lhatja p�ld�ul az \"XSane\" programot, amely "
-"az alkalmaz�smen� \"Multim�dia/Grafika\" r�sz�ben tal�lhat�."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "A t�zfal be�ll�t�sai"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "A t�zfal be�ll�t�sai"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"T�zfal-be�ll�t�sok\n"
-"\n"
-"M�r elv�gezte a t�zfal be�ll�t�s�t. Kattintson a Be�ll�t�s\n"
-"gombra a t�zfal m�dos�t�s�hoz vagy megsz�ntet�s�hez."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"T�zfal-be�ll�t�sok\n"
-"\n"
-"Kattintson a Be�ll�t�s gombra a t�zfal be�ll�t�s�hoz"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "V�lasszon nyelvet"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "V�lasszon telep�t�si m�dot"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Merevlemez keres�se"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Eg�r be�ll�t�sa"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Billenty�zet kiv�laszt�sa"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Biztons�g"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "F�jlrendszerek be�ll�t�sa"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Part�ci�k form�z�sa"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Csomagok kiv�laszt�sa"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Rendszer telep�t�se"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Felhaszn�l� hozz�ad�sa"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "H�l�zat be�ll�t�sa"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Szolg�ltat�sok be�ll�t�sa"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Rendszerind�t� telep�t�se"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Ind�t�lemez k�sz�t�se"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Az X be�ll�t�sa"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Rendszerfriss�t�sek telep�t�se"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Kil�p�s a telep�t�b�l"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Szem�lyes t�zfal be�ll�t�sa\n"
-"\n"
-"Ezzel egy szem�lyes felhaszn�l�sra sz�nt mini t�zfalat lehet be�ll�tani.\n"
-"Ha egy sokfelhaszn�l�s, v�llalati szint� megold�st szeretne, szerezze\n"
-"be a speci�lis MandrakeSecurity Firewall disztrib�ci�t."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"A k�vetkez� k�rd�sekre adott v�laszok hat�rozz�k meg, hogy az internetr�l\n"
-"mely szolg�ltat�sokhoz lehet majd csatlakozni. Gondolja �t a v�laszokat,\n"
-"mert a h�l�zati biztons�g els�rend�en fontos.\n"
-"\n"
-"Ha nem haszn�lja a felsorolt szolg�ltat�sok valamelyik�t, ne enged�lyezze\n"
-"a hozz�f�r�st. A be�ll�t�sokat k�s�bb ebb�l a programb�l b�rmikor meg\n"
-"lehet v�ltoztatni."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Haszn�l olyan internetkiszolg�l�t (webszervert) ezen a g�pen, amelyet\n"
-"el�rhet�v� kell tenni az internetr�l? Ha csak a helyi g�pr�l kell\n"
-"hozz�f�rni a kiszolg�l�hoz, akkor v�laszoljon nemmel.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Haszn�l valamilyen n�vkiszolg�l�t (DNS-szervert) ezen a g�pen? Csak\n"
-"akkor v�laszoljon igennel, ha a c�m- �s z�nainform�ci� lek�rdez�s�t az\n"
-"eg�sz internetr�l lehet�v� szeretn� tenni.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Szeretn� enged�lyezni a bej�v� SSH (Secure Shell) kapcsolatokat? Ez\n"
-"egy telnet-szer� t�voli bejelentkez�si lehet�s�g. Ha m�g a telnetet\n"
-"haszn�lja, akkor mindenk�ppen v�ltson �t az SSH haszn�lat�ra.\n"
-"A telnet-forgalom nincs titkos�tva, ez�rt az abban �tvitt jelszavak\n"
-"nincsenek v�dve illet�ktelen elolvas�s ellen. Az SSH egy biztons�gosabb\n"
-"megold�s, ugyanis titkos�t�st haszn�l."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Szeretn� enged�lyezni a bej�v� telnet-kapcsolatokat?\n"
-"A telnet-adatforgalom nem titkos�tott; biztons�gi kock�zatot jelent.\n"
-"Er�sen javasoljuk, hogy itt a \"Nem\"-et v�lassza, �s SSH-t haszn�ljon\n"
-"telnet helyett.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Haszn�l ezen a g�pen olyan FTP-kiszolg�l�t, amelyet el�rhet�v� kell tenni\n"
-"az internetr�l? Ha igen, akkor er�sen javasoljuk, hogy csak anonymous\n"
-"adat�tvitelt enged�lyezzen. Az FTP-vel tov�bb�tott jelszavak nem\n"
-"biztons�gosak, mert az FTP nem haszn�l semmilyen titkos�t�st\n"
-"adat�tviteln�l.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Haszn�l ezen a g�pen e-mail-kiszolg�l�t (mail-szervert)? Ha az\n"
-"elektronikus �zeneteit ezen a g�pen kereszt�l tov�bb�tja,\n"
-"akkor feltehet�en igen. M�sk�l�nben ne enged�lyezze.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Haszn�l ezen a g�pen POP- vagy IMAP-kiszolg�l�t? Ezeken\n"
-"kereszt�l lehet a be�rkez� levelekhez hagyom�nyos\n"
-"(nem Web-alap�) levelez�programmal hozz�f�rni.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"�gy t�nik, hogy a Linux kernel 2.2-es v�ltozat�t haszn�lja. Ha az\n"
-"IP-c�mek kioszt�s�hoz helyi dinamikus c�mkioszt� szolg�ltat�st haszn�l,\n"
-"akkor ezt ebben az esetben k�l�n enged�lyezni kell. Haszn�l\n"
-"dinamikus c�mkioszt�st?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"R�szt vesz a g�p automatikus id�szinkroniz�ci�ban?\n"
-"A k�zepes �s nagyobb v�llalatok �gy biztos�tj�k, hogy a k�l�nf�le\n"
-"g�pek �r�i ne t�rjenek el egym�st�l (p�ld�ul a napl�z�sn�l fontos).\n"
-"Ha nem tud ilyesmir�l, �s nem nagy c�gn�l haszn�lja a g�pet, akkor\n"
-"val�sz�n�leg nemleges a v�lasz."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"A be�ll�t�s befejez�d�tt. Elmenthetem a lemezre a m�dos�t�sokat?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "%s megnyit�sa nem siker�lt: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "%s �r�sra val� megnyit�sa nem siker�lt: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Nincs sz�ks�gem DHCP-re"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Sz�ks�gem van DHCP-re"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Nincs sz�ks�gem NTP-re"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Sz�ks�gem van NTP-re"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Ne legyen ment�s"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Ment�s �s kil�p�s"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "T�zfalbe�ll�t�si var�zsl�"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Nem (blokkol�s a t�zfal �ltal)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Igen (�tenged�s a t�zfalon)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Kis t�relmet k�rek; a telep�tett csomagok ellen�rz�se folyik"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Nem siker�lt telep�teni a sz�ks�ges csomagokat: %s �s Bastille.\n"
-" Pr�b�lja meg k�zzel telep�teni ezeket."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "H�l�zati sz�m�t�g�p (kliens)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-, SMB-, proxy- �s SSH-kiszolg�l�"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Iroda"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "GNOME-munka�llom�s"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Seg�dprogramok a Palmhoz �s a Visorhoz"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Munka�llom�s"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "T�zfal/�tv�laszt� (router)"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "DNS- �s NIS-kiszolg�l�"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Irodai programok: sz�vegszerkeszt�k (KWord, AbiWord), t�bl�zatkezel�k "
-"(KSpread, Gnumeric), PDF-n�zeget�k, ..."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Hangkezel� eszk�z�k: MP3- �s MIDI-lej�tsz�k, hangkever�k, ..."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "K�nyvek �s HOGYAN-ok a Linuxr�l �s a szabad szoftverekr�l"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE-munka�llom�s"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "IceWM, WindowMaker, Enlightenment, Fvwm, ..."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multim�dia - vide�"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "E-mail-eszk�z�k, h�rkezel�s, web-eszk�z�k, f�jl�tvitel �s cseveg�s"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Adatb�zis"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL vagy MySQL adatb�zis-kiszolg�l�"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Seg�dprogramok a sz�m�t�g�p be�ll�t�s�hoz"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multim�dia - hang"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Seg�dprogramok"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokument�ci�"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Parancssoros eszk�z�k"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix e-mail-kiszolg�l�, Inn h�rkiszolg�l�"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetes munka�llom�s"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multim�di�s munka�llom�s"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Be�ll�t�s"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Tov�bbi grafikus k�rnyezetek (GNOME, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"A K Desktop Environment - az alapvet� grafikus k�rnyezet - az ahhoz tartoz� "
-"eszk�z�kkel egy�tt"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafikus k�rnyezet"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Seg�dprogramok CD-�r�shoz"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Irodai munka�llom�s"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Kiszolg�l�"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "GNOME, IceWM, WindowMaker, Enlightenment, Fvwm, ..."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafikus programok (p�ld�ul a GIMP)"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C/C++ fejleszt�k�nyvt�rak, programok �s include f�jlok"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Kiszolg�l� h�l�zati sz�m�t�g�pekhez"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-mail/csoportmunka/h�rek"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "J�t�kg�p"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Vide�lej�tsz�k �s -szerkeszt�k"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multim�dia - grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "J�t�kprogramok: l�v�ld�z�s, t�bl�s, strat�giai, ..."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Eszk�z�k levelez�shez, h�rkezel�shez (pine, mutt, tin, ...) �s a Web "
-"b�ng�sz�s�hez"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archiv�l�s, emul�torok, monitoroz� programok"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Szem�lyes p�nz�gyek"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafikus k�rnyezet felhaszn�l�bar�t alkalmaz�sokkal �s seg�dprogramokkal"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Kliensprogramok k�l�nf�le protokollokhoz (p�ld�ul: ssh)"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet-�tj�r�"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Hang/vide�lej�tsz� �s -szerkeszt� programok"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "M�s grafikus k�rnyezetek"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Sz�vegszerkeszt�k, parancs�rtelmez�k, f�jlkezel�k, termin�lprogramok"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programok a szem�lyes p�nz�gyek kezel�s�hez (p�ld�ul: GnuCash)"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Szem�lyes inform�ci�kezel�s"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multim�dia - CD-�r�s"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Tudom�nyos munka�llom�s"
diff --git a/perl-install/share/po/i18n_compssUsers b/perl-install/share/po/i18n_compssUsers
deleted file mode 100644
index f6dc1ef7d..000000000
--- a/perl-install/share/po/i18n_compssUsers
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/usr/bin/perl
-
-use MDK::Common;
-
-sub get {
-    my ($meta_class) = @_;
-    my @l;
-
-    local *F;
-    open F, "../compssUsers$meta_class" or return; #die "can't open file ../compssUsers$meta_class";
-    foreach (<F>) {
-	/^\s*$/ || /^#/ and next;
-
-	if (/^(\S.*)/) {
-	    my ($icon, $path, $descr);
-	    /^(.*?)\s*\[icon=(.*?)\](.*)/  and $_ = "$1$3", $icon  = $2;
-	    /^(.*?)\s*\[path=(.*?)\](.*)/  and $_ = "$1$3", $path  = $2;
-	    /^(.*?)\s*\[descr=(.*?)\](.*)/ and $_ = "$1$3", $descr = $2;
-	    push @l, $_, $descr, $path;
-	}
-    }
-    close F;
-
-    @l;
-}
-
-my @l = map { if_(/msgid "(.*)"/, $1) } cat_("DrakX.pot");
-my %l; @l{@l} = ();
-
-foreach (uniq(get(''), get('.desktop'))) {
-    if ($_) {
-        s/"/\"/g;
-        s/\n//g;
-	next if exists $l{$_};
-        print qq(
-#: ../../share/compssUsers:999
-msgid "$_"
-msgstr ""
-);
-    }
-}
diff --git a/perl-install/share/po/id.po b/perl-install/share/po/id.po
deleted file mode 100644
index bf75c2e01..000000000
--- a/perl-install/share/po/id.po
+++ /dev/null
@@ -1,13585 +0,0 @@
-# Instal Grafis Mandrake
-# Copyright (C) 1999 Mandrakesoft
-# Budi Rachmanto <rac@linux-mandrake.com>, 2001-2002
-# Linux Indonesia <http://www.linux.or.id>, 1999-2001
-# Mohammad DAMT <mdamt@cdl2000.com>, 1999-2001
-# Andy <chandy@indo.net.id>, 1999
-# Kelana <nk@telkom.net>, 1999
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 0.1\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-05 21:55+09:00\n"
-"Last-Translator: Budi Rachmanto <rac@linux-mandrake.com>\n"
-"Language-Team: Bahasa Indonesia <id@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.6\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfigurasikan semua head secara terpisah"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Gunakan ekstensi Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurasi kartu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Konfigurasi head majemuk"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Sistem Anda mendukung konfigurasi head majemuk.\n"
-"Apa yg ingin Anda lakukan?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Kartu grafis"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Pilih kartu grafis"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Pilih server X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Server X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Pilih driver X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Driver X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Konfigurasi XFree mana yang Anda inginkan?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Kartu Anda punya akselerasi hardware 3D, tapi hanya bisa digunakan pada "
-"XFree %s.\n"
-"Kartu Anda ini dapat dipakai pada XFree %s yg punya dukungan baik dalam 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Kartu Anda dapat menggunakan akselerasi hardware 3D pada XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s dengan akselerasi hardware 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Kartu Anda dapat menggunakan akselerasi hardware 3D pada XFree %s,\n"
-"NAMUN INI BARU DALAM TAHAP PERCOBAAN DAN DAPAT MEMBUAT KOMPUTER ANDA HANG."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s dengan akselerasi hardware 3D PERCOBAAN"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Kartu Anda dapat menggunakan akselerasi hardware 3D pada XFree %s,\n"
-"NAMUN INI BARU DALAM TAHAP PERCOBAAN DAN DAPAT MEMBUAT KOMPUTER ANDA HANG.\n"
-"Kartu Anda ini dapat digunakan XFree %s yang lebih baik dalam 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalasi driver display)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Konfigurasi XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Pilih memori kartu grafis Anda"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Pilih opsi server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Pilih monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Ada dua parameter penting, yaitu laju refresh vertikal, yaitu laju\n"
-"kecepatan saat seluruh layar direfresh, dan yang lebih penting lagi adalah\n"
-"laju sync horisontal, yaitu laju kecepatan saat menanyangkan scan line.\n"
-"\n"
-"Anda TIDAK BOLEH mengisi parameter yang tidak dapat\n"
-"diimbangi dengan kemampuan monitor Anda, karena monitor\n"
-"Anda akan rusak berat.\n"
-"Kalau Anda ragu, gunakan setting yang umum."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Laju refresh horisontal"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Laju refresh vertikal"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor tidak dikonfigurasi"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Kartu grafis belum dikonfigurasi"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Resolusi belum ditentukan"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Anda ingin tes konfigurasi ini?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Awas: tes kartu grafis ini dapat membekukan komputer Anda"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Tes konfigurasi"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"coba ubah beberapa parameter"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ada error:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Tinggalkan dalam %d detik"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Setting sudah benar?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ada kesalahan, coba ubah beberapa parameter"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolusi"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Pilih resolusi dan kedalaman warna"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Kartu grafis: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Tambahan"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Mode Ahli"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Tunjukan seluruhnya"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resolusi"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Layout Keyboard: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Jenis Mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Device Mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "HorizSync Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "VertRefresh Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Kartu grafis: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikasi kartu grafis: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memori grafis: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Pilihan kedalaman warna: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolusi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Server XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Driver XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Siap-siap konfigurasikan X "
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Apa yang akan Anda mau?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Ubah Monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Ubah kartu grafis"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Ubah Parameter Server"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Ubah Resolusi"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Lihat info"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Tes lagi"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Keluar"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Lakukan perubahan?\n"
-"Konfigurasi sekarang adalah:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X saat startup"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Saya bisa bikin komputermu akan menjalankan X saat booting.\n"
-"Anda mau fasilitas ini ?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Silakan masuk lagi ke %s untuk mengaktifkan perubahan"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Silakan log out dan tekan Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 warna (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ribu warna (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ribu warna (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 juta warna (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milyar warna (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB atau lebih"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA Standar, 640x480 pada 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "VGA Super, 800x600 pada 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Kompatibel, 1024x768 pada 87 Hz interlaced (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 pada 87 Hz interlaced, 800x600 pada 56 hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 pada 60 Hz, 640x480 pada 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 pada 60 Hz, 800x600 pada 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 pada 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency yang dapat mencapai 1280x1024 pada 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency yang dapat mencapai 1280x1024 pada 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency yang dapat mencapai 1280x1024 pada 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor yang dapat mencapai 1600x1200 pada 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor yang dapat mencapai 1600x1200 pada 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Sektor pertama di partisi boot"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Sektor pertama di drive (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instalasi SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Bootloader akan diinstall di mana?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalasi LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO dengan menu teks"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO dengan menu grafis"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Boot dari DOS/windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Parameter Bootloader utama"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Bootloader yang hendak digunakan"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalasi Bootloader"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Device boot"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (tidak bisa dipakai pada BIOS kuno)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Mode video"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Delay sebelum boot ke image default"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Katasandi"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Katasandi (lagi)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Batasi parameter command line"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "batasi"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Hapus /tmp saat boot"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ukuram RAM yg tepat (saya nemu %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Buat multi profil"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Berikan jumlah RAM dalam satuan MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Pilihan ``Batasi parameter command line'' tidak ada gunanya tanpa katasandi"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Silakan ulangi"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Katasandi tidak sama"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Pesan Init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Delay Open Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Timeout Kernel Boot"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Aktifkan boot dari CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Aktifkan boot dari OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Default OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Anda memutuskan instalasi pemuat boot di partisi.\n"
-"Berarti Anda sudah punya pemuat boot di harddisk yang Anda boot (mis: System "
-"Commander).\n"
-"\n"
-"Di drive mana Anda boot?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ini adalah entri yang lain lagi.\n"
-"Anda boleh tambahkan atau mengubah yang sudah ada."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Tambah"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Selesai"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modifikasi"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Tipe entri mana yang hendak ditambahkan"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "OS Lain (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "OS Lain (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "OS Lain (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Sambung"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Tak aman"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Label"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Default"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Hapus entri"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Label tidak boleh kosong"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Anda harus tentukan image kernel"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Anda harus tentukan partisi swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Label ini sudah dipakai"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Ketemu interface %s %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Anda punya lagi?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Punya %s interface?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Tidak"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ya"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Lihat info hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Menginstall driver untuk card %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Driver %s mana yang hendak saya coba?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Kadangkala, driver %s butuh informasi tambahan agar dapat bekerja normal\n"
-"walaupun kadangkala juga ini tidak perlu. Nah, apakah Anda ingin untuk\n"
-"memberikan parameter tambahan tadi atau biarkan saja drivernya melakukan\n"
-"deteksi sendiri parameternya? Biasanya, autodetek akan membuat kompputer\n"
-"jadi hengki (baca: hang), tapi biasanya sih tak ngerusak hardwarenya."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Probe otomatis"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Tentukan opsi"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Anda dapat memberikan opsi terhadap modul %s.\n"
-"Ingat, semua alamat harus diisikan dengan awalan 0x misalnya '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Silakan beri parameter untuk modul %s ini.\n"
-"Parameter biasanya dalam format ``nama=nilai nama2=nilai2...''.\n"
-"Misalnya, ``io=0x300 irq=8''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Pilihan Modul:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Module %s gagal diload.\n"
-"Mau coba lagi dengan parameter yang lain?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "akses ke program X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "akses ke peralatan rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "izinkan \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "akses ke file administratif"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(sudah ditambahkan %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Katasandi ini terlalu sederhana"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Silakan tulis nama user"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Nama user hanya boleh terdiri dari huruf, angka, `-' dan `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "User ini sudah ada sebelumnya"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Tambah user"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Masukkan user\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Buat user"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nama Lengkap"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nama user"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Komputer Anda dapat diset agar secara otomatis login dg satu user.\n"
-"Anda ingin pakai feature ini?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Pilih user default:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Pilih manajer window yg akan dipakai:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Pilih bahasan yg akan dipakai."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Anda bisa pilih bahasa lain yang akan tersedia setelah install selesai"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Semua"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Izinkan semua user"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Customized"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Tiada pemakaian bersama"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paket %s perlu diupgrade. Anda ingin instal?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Anda dapat mengekspor dg NFS atau Samba. Mana yg Anda ingin"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Paket wajib %s hilang"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Batal"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Luncurkan userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Sharing per-user menggunakan grup \"fileshare\". \n"
-"Anda dapat memakai userdrake utk menambah user di grup ini."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Selamat Datang di Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Lemah"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standar"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Kuat"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Lebih Kuat"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Pengecut"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Level ini harus hati-hati. Level ini akan membuat sistem Anda akan mudah\n"
-"digunakan, tapi sangat sensitif: mesin ini tidak boleh digunakan untuk\n"
-"mesin yang terhubung ke mesin lain atau ke ke Internet. Tidak akan ada\n"
-"akses katasandi."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr "Katasandi akan diaktifkan, tapi mohon jangan disambungkan ke jaringan."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ini adalah sekuriti standar, dianjurkan untuk komputer yang akan\n"
-"terkoneksi ke Internet sebagai klien."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Sudah ada beberapa batasan, dan beberapa pengecekan otomatis berjalan tiap "
-"malam."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Dengan level sekuriti ini, sistem akan dapat digunakan sebagai server.\n"
-"Sekuriti kini cukup tinggi untuk dapat melayani koneksi banyak klien.\n"
-"Jika mesin Anda hanya berfungsi sebagai klien, pilihlah level lebih rendah."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Sama dengan level sebelumnya, tapi sistem sepenuhnya ditutup.\n"
-"Fitur sekuriti maksimum."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Pilih Tingkat Security"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Tingkat keamanan"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Gunakan libsafe utk server"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "Library penahan serangan string format dan overflow buffer"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Selamat datang di Sang Pemilih Sistem Operasi, %s!\n"
-"\n"
-"pilih sistem operasi pada daftar di atas atau tunggu %d detik untuk boot ke "
-"default.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Selamat datang di sang pemilih sistem operasi, GRUB"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Gunakan tombol %c dan %c untuk memilih entri yang disorot"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Tekan enter untuk memboot OS yang terpilih, atau tekan 'e' untuk edit"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "perintah sebelum booting, atau 'c' untuk command line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Entri yang dipilih akan diboot secara otomatis dalam %d detik."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "Waah /boot tak cukup spacenya nih"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Anda tak dapat menginstal bootloader pada partisi %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr " belom ada help-nya nih.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfigurasi Tipe Boot"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_File"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/File/_Keluar"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Kategori Monitor Gaya Baru"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor GayaBaru"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor Biasa"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Biasa Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Jalankan aurora saat boot"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "mode Lilo/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "mode Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Manajer Boot: %s. Klik Configure untuk memanggil ahli setup."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigurasikan"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Mode sistem"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Jalankan X-Window saat sistem dimulai"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Tidak, saya tak mau autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ya, saya mau autologin dg (user,desktop) ini"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "gagal baca file /etc/inittab nih: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d menit"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 menit"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d detik"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Gagal membuat screenshot sebelum buat partisi"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Screenshot akan tersedia setelah instal di %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Perancis"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgia"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Republik Ceko"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Jerman"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Yunani"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norwegia"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Swedia"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Belanda"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Itali"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Amerika Serikat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Lebih dulu buatlah backup data Anda"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Baca dengan seksama!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jika Anda ingin pakai aboot, sisakan ruang (cukup 2048 sektor) di awal disk"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Ada Kesalahan"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Wizard"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Pilih aksi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Anda punya satu partisi FAT yang besar.\n"
-"(umumnya dipakai oleh wicrosoft Dos/mindows).\n"
-"Disarankan utk mengubah ukuran partisi ini\n"
-"(klik di situ, lalu pilih \"Ubah ukuran\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Silakan pilih partisi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detil"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "FS terjournal"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Kosong"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Lainnya"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipe filesystem:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Buat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipe"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Gunakan ``%s'' saja"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Hapus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Gunakan ``unmount'' terlebih dahulu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Setelah mengganti tipe partisi %s, semua data pada partisi ini akan hilang"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Pilih partisi"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Pilih partisi lain"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Keluar"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Ubah ke modus ahli"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Ubah ke modus normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Kembali"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Jalan terus?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Keluar tanpa menyimpan"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Keluar dari program tanpa menyimpan dalam tabel partisi?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ingin simpan modifikasi /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Alokasi otomatis"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Hapus semua"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Info hard drive"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Semua partisi primary telah digunakan"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Partisi tak dapat ditambah"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Untuk menambahkan partisi, hapus satu agar dapat membuat partisi extended"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Simpan tabel partisi"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Kembalikan tabel partisi"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Selamatkan tabel partisi"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Muat ulang tabel partisi"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Mount otomatis media lepas"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Pilih file"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Backup tabel partisi tidak memiliki ukuran yg sama\n"
-"Jalan terus?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Awas"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Masukkan disket ke drive\n"
-"semua data di disket ini akan hilang"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Sedang mencoba menyelamatkan tabel partisi"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Info detil"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Posisi mount"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Pilihan"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Ubah ukuran"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Pindah"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Format"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Mount"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Tambahkan ke RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Tambahkan ke LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Unmount"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Hapus dari RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Hapus dari LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Ganti RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "digunakan untuk loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Membuat partisi baru"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sektor awal: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Ukuran dalam MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipe filesystem: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Posisi mount: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Kesukaan: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Hapus file loopback?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Mengubah tipe partisi"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Filesystem apa yang Anda inginkan?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Pindah dari ext2 ke ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Device loopback %s akan di mount ke mana?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Mount device %s akan di mount ke mana?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Tak bisa unset mount point karena partisi ini sudah digunakan untuk\n"
-"loopback. Hapus dulu loopbacknya kalau mau begitu."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Sedang menghitung bound filesystem fat"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Sedang mengubah ukuran"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ukuran partisi ini tidak dapat diubah"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "semua data pada partisi ini sebaiknya dibackup dulu"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Sehabis meresize partisi %s, semua data pada partisi ini akan hilang"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Pilih ukuran baru"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Ukuran baru dalam MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Disk mana yang hendak dipindah?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Sektor mana yang hendak dipindah"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Pindah"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Memindahkan partisi..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Pilih RAID yang ada untuk ditambahkan ke"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "baru"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Pilih LVM yang ada untuk ditambahkan ke"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "nama LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Partisi ini tak bisa dipakai sebagai loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nama file loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Berikan nama file"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "File sudah digunakan loopback yang lain, pilih yang lainnya dong"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "File sudah ada. Gunakan file ini ?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opsi mount"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Macam-macam"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "device"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "level"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "ukuran chunk"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Hati-hati nih: operasi ini sangat berbuahayyya"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Tipe partisi apa yang hendak digunakan?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Maaf, Saya tidak mau membuat /boot di drive ini (silindernya > 1024).\n"
-"Kalau Anda pakai LILO dan tak jalan, atau Anda tak mau LILO dan tak mau /"
-"boot juga"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Anda menambahkan partisi root di luar silinder 1024,\n"
-"dan Anda tidak memiliki partisi /boot. Apabila Anda akan menggunakan lilo\n"
-"(boot manager), hati-hati dalam menambahkan partisi /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Anda memilih partisi RAID software sebagai root (/).\n"
-"Sekarang bootloader tak ada yang bisa handel tanpa partisi /boot.\n"
-"Jadi hati-hati dalam menambahkan partisi /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabel partisi pada drive %s akan ditulis ke disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Anda harus reboot agar perubahan tabel partisi dapat berlaku"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Sehabis memformat partisi %s semua data pada partisi ini akan hilang"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Sedang memformat"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Sekarang sedang memformat file loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Melakukan format partisi %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Sembunyikan file"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Pindah file ke partisi baru"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Direktori %s telah berisi data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Pindah file ke partisi baru"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Salin %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Hapus %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partisi %s sekarang jadi %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Device: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS letter: %s (hanya tebakan)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipe: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nama: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Mulai: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Ukuran: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektor"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silinder %d sampai %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Telah diformat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Belum diformat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Telah di-mount\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"File loopback:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partisi di-boot secara default\n"
-"    (untuk MS-DOS boot, bukan untuk lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Level %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ukuran chunk %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Disk RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nama file loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Mungkin partisi ini adalah \n"
-"partisi driver, jadi sebaiknya\n"
-"jangan diapa-apain deh.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"partisi ini adalah partisi bootstrap\n"
-"yang khusus digunakan \n"
-"oleh sistem dual boot.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Ukuran: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ukuran: %s silinber, %s head, %s sektor\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Disk LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partisi tipe: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "pada bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Pilihan: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Kunci sandi sistem file"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Pilih kunci sandi sistem file Anda"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Katasandi ini terlalu mudah (harus paling tidak %d karakter)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Kunci sandi tak cocok"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Kunci sandi"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Kunci sandi (lagi)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Ubah tipe"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Klik salah satu media"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Cari Server"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s proses format dari %s gagal"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "tidak bisa melakukan format %s dengan tipe %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "penyambungan partisi %s ke direktori %s gagal"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck gagal dg kode keluar %d / sinyal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "error melepas mount %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "mudah"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "dengan /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS tak dapat dipakai utk partisi berukuran di bawah 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS tak dapat dipakai utk partisi berukuran di bawah 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Mount point harus diawali dengan /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Partisi dengan titik mount %s sudah ada\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Anda tak dapat menggunakan LVM Logical Volume untuk titik mount %s."
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Direktori ini harus ada di filesystem root"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "Anda perlu filesystem yg benar (ext2, reiserfs) utk titik mount ini\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Anda tak dapat menggunakan sistem file bersandi utk mount point %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Tak cukup ruangan untuk alokasi otomatis"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Tiada yang dikerjakan"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "error membuka file %s untuk ditulisi: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Error - tidak ada device yang valid untuk membuat filesystem baru. Periksa "
-"kembali hardware untuk mencari penyebabnya"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Anda tak punya partisi!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux adalah sistem multiuser, artinya tiap user bisa punya kesukaan,\n"
-"file dll sendiri. Anda bisa membaca ``User Guide'' utk belajar lebih dalam.\n"
-"Tapi tak seperti \"root\", sang administrator, user di sini tak berhak\n"
-"mengubah apapun kecuali konfigurasi dan file mereka sendiri. Anda harus\n"
-"membuat setidaknya satu user reguler utk Anda sendiri. Account ini Anda\n"
-"pakai utk rutinitas. Meski Anda dapat login sbg \"root\" tiap hari, tapi\n"
-"itu amat berbahaya! Kesalahan terkecil dapat menyebabkan sistem Anda tak\n"
-"bekerja selamanya. Meski Anda melakukan kesalahan serius sbg user normal,\n"
-"Anda hanya akan kehilangan sebagian informasi, tidak seluruh sistem.\n"
-"\n"
-"Pertama, Anda harus mengisi nama. Ini tidak wajib, tentu saja - Anda dapat\n"
-"mengisinya sesuka Anda. DrakX akan mengambil kata pertama yg anda masukkan\n"
-"di kotak sbg \"Nama user\". Ini adalah nama user yg dipakai utk login ke\n"
-"sistem. Anda bisa mengubahnya. Lalu Anda harus mengisi katasandi. Katasandi\n"
-"user non-privileged (reguler) tak sepenting katasandi \"root\" dari segi\n"
-"keamanan, tapi tak ada alasan utk mengabaikannya - file Anda bisa beresiko.\n"
-"\n"
-"Klik \"Buat user\", selanjutnya Anda dapat menambahkan user sebanyak Anda\n"
-"mau. Misalnya, tambahkan user utk teman, ayah, atau saudara Anda. Bila Anda\n"
-"selesai menambahkan semua user, pilih \"Selesai\".\n"
-"\n"
-"Klik \"Tambahan\" memungkinkan Anda mengubah \"shell\" standar utk user\n"
-"terkait (standar: bash)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Yang terdaftar di atas adalah partisi Linux terdeteksi pd hard drive Anda.\n"
-"Anda dapat memakai pilihan yg dibuat oleh wizard, itu baik utk instalasi\n"
-"umum. Bila Anda mengubah pilihan, setidaknya Anda perlu mendefinisikan\n"
-"partisi root (\"/\"). Jangan pilih partisi yg terlalu kecil agar dapat\n"
-"menginstal software dg leluasa. Bila Anda ingin menyimpan data pada partisi\n"
-"lain, Anda perlu membuat partisi \"/home\" (hanya mungkin jika punya lebih\n"
-"dari satu partisi Linux.)\n"
-"\n"
-"Tiap partisi terdaftar sbb: \"Nama\", \"Kapasitas\".\n"
-"\n"
-"\"Nama\" berstruktur: \"tipe hard drive\", \"nomor hard drive\",\n"
-"\"nomor partisi\" (misalnya \"hda1\").\n"
-"\n"
-"\"Tipe hard drive\" adalah \"hd\" utk drive IDE dan \"sd\" utk drive SCSI.\n"
-"\n"
-"\"Nomor Hard Drive\", selalu berupa huruf setelah \"hd\" atau \"sd\". Bila "
-"berupa IDE, maka:\n"
-"\n"
-"   *\"a\" berarti \"hard drive master pada kontroller IDE primer\",\n"
-"\n"
-"   *\"b\" berarti \"hard drive slave pada kontroler IDE primer\",\n"
-"\n"
-"   *\"c\" berarti \"hard drive master pada kontroler IDE sekunder\",\n"
-"\n"
-"   *\"d\" berarti \"hard drive slave pada kontroler IDE sekunder\",\n"
-"\n"
-"\n"
-"Pada drive SCSI, \"a\" berarti \"hard drive utama, \"b\" berarti \"hard "
-"drive kedua\", dsb..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Instalasi Mandrake Linux terdiri atas bbrp CDROM. DrakX tahu jika paket\n"
-"terpilih berada di CDROM lain dan akan mengeluarkan CD yg ada utk kemudian\n"
-"meminta Anda memasukkan CD yg diperlukan."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Kini kita tentukan program yg akan diinstal di sistem Anda. Ribuan paket\n"
-"tersedia di Mandrake Linux, Anda tak perlu mengenal semuanya.\n"
-"\n"
-"Jika Anda menjalankan instalasi standar dari CDROM, Anda akan diminta\n"
-"menentukan CD yg Anda punya (hanya pd mode Ahli). Cek label CD dan\n"
-"tandai kotak yg sesuai dg CD yg Anda miliki utk instalasi. Klik \"OK\" jika\n"
-"Anda siap melanjutkan.\n"
-"\n"
-"Paket disortir menurut grup sesuai kegunaan mesin Anda.\n"
-"Grup diurutkan ke dalam empat bagian:\n"
-"\n"
-" * \"Workstation\": jika Anda ingin menggunakan mesin Anda sbg workstation, "
-"pilih\n"
-"satu/lebih grup yg sesuai.\n"
-"\n"
-" * \"Development\": jika mesin akan digunakan utk pemrograman, pilih grup\n"
-"yg diinginkan.\n"
-"\n"
-" * \"Server\": jika mesin diinginkan menjadi server, Anda dapat\n"
-"memilih servis paling umum yg akan diinstal.\n"
-"\n"
-" * \"Lingkungan Grafis\": akhirnya, di sini Anda memilih lingkungan\n"
-"grafis. Minimal Anda harus pilih satu jika ingin punya workstation grafis!\n"
-"\n"
-"Untuk melihat penjelasan singkat, gerakkan kursor mouse ke atas nama grup.\n"
-"Jika Anda tak memilih satu grup pun saat melakukan instalasi normal (bukan\n"
-"upgrade) popup dialog akan muncul dengan menu instalasi minimal:\n"
-"\n"
-" * \"Dengan X\" Instal paket minimal yang memungkinkan kerja dengan desktop\n"
-"grafis;\n"
-"\n"
-" * \"Dengan dokumentasi dasar\" Instal sistem plus peralatan dasar dan\n"
-"dokumentasinya. Instalasi ini cocok untuk setup server.\n"
-"\n"
-" * \"Instalasi minimal sungguh\" Hanya instal kebutuhan minimum sistem,\n"
-"dalam baris perintah saja. Butuh sekitar 65Mb.\n"
-"\n"
-"Anda dapat memilih \"Pilih paket sendiri\", berguna jika Anda tahu baik\n"
-"paket yg disediakan atau ingin mengontrol instalasi secara total.\n"
-"\n"
-"Jika Anda memulai instalasi dg mode \"Upgrade\", Anda dapat melepas seleksi\n"
-"semua group utk menghindari instalasi paket baru. Ini berguna utk reparasi\n"
-"atau update sistem yg ada."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Akhirnya, tergantung apakah Anda memilih paket sendiri atau tidak, Anda\n"
-"akan diberi pohon berisi paket terkelompok dg grup/subgrup. Sambil meneliti\n"
-"pohon, Anda dapat memilih semua grup, subgrup, atau paket tersendiri.\n"
-"\n"
-"Tiap kali Anda memilih paket di pohon, penjelasan muncul di sisi kanan.\n"
-"Bila seleksi Anda selesai, klik tombol \"Instal\" utk memulai instalasi.\n"
-"Tergantung kecepatan hardware dan jumlah paket yg diinstal, mungkin\n"
-"dibutuhkan bbrp saat utk instalasi. Perkiraan waktu instalasi ditampilkan\n"
-"di layar utk membantu Anda memperkirakan waktu menikmati secangkir kopi.\n"
-"\n"
-"!! Jika paket server terpilih dg sengaja atau karena merupakan bagian suatu\n"
-"grup besar, akan ada pertanyaan konfirmasi instalasi paket tersebut. Pada\n"
-"Mandrake Linux, secara default semua server terinstal dijalankan saat boot.\n"
-"Meski aman saat distribusi diluncurkan, ada kemungkinan lubang keamanan\n"
-"ditemukan setelah versi Mandrake Linux ini rampung. Jika Anda tak tahu apa\n"
-"yg dilakukan oleh suatu servis atau mengapa ia diinstal, klik \"Tidak\".\n"
-"Jika Anda menekan \"Ya\" servis terdaftar akan diinstal dan secara standar\n"
-"akan dijalankan secara otomatis. !!\n"
-"\n"
-"Opsi \"Ketergantungan otomatis\" mematikan dialog yg muncul tiap kali\n"
-"instalator memilih suatu paket scr otomatis. Ini terjadi karena\n"
-"ketergantungan harus dipenuhi dg paket lain agar instalasi sukses.\n"
-"\n"
-"Ikon disket di dasar list memungkinkan pemuatan daftar paket ter-instal pd\n"
-"instalasi sebelumnya. Jika diklik, Anda akan diminta memasukkan disket yg\n"
-"dibuat pd akhir instalasi yg lalu. Lihat tip kedua di step terakhir utk\n"
-"membuat floppy tersebut."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Kini koneksi internet/jaringan akan disetup. Jika Anda ingin menyambung\n"
-"komputer Anda dg Internet atau jaringan lokal, klik \"OK\". Deteksi\n"
-"otomatis perangkat jaringan dan modem akan diluncurkan. Jika deteksi gagal,\n"
-"selanjutnya jangan tandai kotak \"Pakai deteksi otomatis\". Anda juga dapat\n"
-"memilih tak mengkonfigurasikan jaringan, atau mengerjakannya nanti; jika\n"
-"demikian, klik tombol \"Batal\".\n"
-"\n"
-"Koneksi yg tersedia adalah: modem tradisional/ISDN, hubungan ADSL, modem\n"
-"kabel, dan hubungan LAN (Ethernet).\n"
-"\n"
-"Di sini konfigurasi tak dirinci. Pastikan Anda punya semua parameter dari\n"
-"ISP atau administrator sistem.\n"
-"\n"
-"Penjelasan dapat dilihat di manual hubungan Internet. Atau tunggulah hingga\n"
-"sistem terinstal dan pakailah program yg dijelaskan utk setup koneksi.\n"
-"\n"
-"Jika Anda ingin mengkonfigurasi network pasca instalasi atau bila instalasi\n"
-"jaringan selesai, klik \"Batal\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Kini Anda boleh pilih servis mana yang dijalankan saat boot.\n"
-"\n"
-"Di sini ditampilkan semua servis yg tersedia di instalasi ini. Periksa dg\n"
-"baik dan jangan tandai servis yg tak selalu diperlukan saat boot.\n"
-"\n"
-"Ada penjelasan singkat bila suatu servis dipilih. Tapi jika Anda tak yakin\n"
-"kegunaan servis tsb., lebih aman tak usah diusik.\n"
-"\n"
-"Pada tahap ini, hati-hati jika Anda bermaksud menjadikan mesin Anda sebuah\n"
-"server: Anda mungkin tak ingin menjalankan servis yg tak diperlukan. Ingat,\n"
-"bbrp servis bisa berbahaya jika dijalankan. Secara umum, pilihlah hanya\n"
-"servis yang benar-benar Anda perlukan."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux mengatur waktu dlm GMT (Greenwich Mean Time) dan menerjemahkannya\n"
-"ke waktu lokal tergantung zona waktu yang Anda pilih. Dapat di-nonaktifkan\n"
-"dengan melepas tanda \"Jam hardware diset ke GMT\" sehingga jam hardware\n"
-"sama dengan jam sistem. Berguna bila mesin didiami OS lain seperti Mindows.\n"
-"\n"
-"Opsi \"Sinkronisasi waktu otomatis\" akan otomatis mengatur jam dengan\n"
-"menghubungi server waktu remote di internet. Pilihlah server terdekat saat\n"
-"daftar muncul. Tentu saja Anda harus punya koneksi internet agar fitur ini\n"
-"berfungsi. Server waktu akan diinstalkan di mesin Anda dan dapat dipakai\n"
-"oleh mesin lain di jaringan lokal Anda."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (Sistem Window X) adalah jantung antarmuka grafis GNU/Linux tempat sandar\n"
-"semua lingkungan grafis (KDE, Gnome, AfterStep, WindowMaker...) Mandrake\n"
-"Linux. Di sini DrakX akan mencoba mengkonfigurasi X secara otomatis.\n"
-"\n"
-"Jarang sekali gagal, kecuali jika hardware amat kuno (atau amat baru). Jika\n"
-"sukses, X otomatis dijalankan dg resolusi terbaik sesuai ukuran monitor.\n"
-"Window akan muncul dan bertanya apakah Anda dapat melihatnya.\n"
-"\n"
-"Jika Anda melakukan instal \"Ahli\", Anda akan memasuki wizard konfigurasi\n"
-"X. Lihat bab yg bersangkutan di manual utk info lanjut ttg wizard ini.\n"
-"\n"
-"Jika Anda dapat melihat pesan dan menjawab \"Ya\", DrakX akan maju ke tahap\n"
-"berikut. Jika Anda tak dapat melihat pesan, berarti konfigurasi salah dan\n"
-"10 detik kemudian tes otomatis berakhir dg kembali ke layar semula."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Pertama kali mencoba konfigurasi X, Anda mungkin tak puas dg tampilannya\n"
-"(layar terlalu kecil, tergeser ke kiri/kanan...). Jadi walau X jalan dengan\n"
-"baik, DrakX akan bertanya apakah konfigurasi ini memuaskan. Mode valid yang\n"
-"ditemukan juga akan disajikan untuk dipilih.\n"
-"\n"
-"Jika Anda tetap gagal menjalankan X, pilih \"Ubah kartu grafis\", lalu\n"
-"\"Kartu tak terdaftar\", dan saat ditanya server apa yg Anda inginkan,\n"
-"pilih \"FBDev\". Ini adalah opsi failsafe yg jalan di kartu grafis modern.\n"
-"Lalu pilih \"Tes lagi\" agar yakin."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Akhirnya, Anda akan ditanya apakah Anda ingin punya antarmuka grafis saat\n"
-"boot. Pertanyaan ini diajukan meski Anda memilih tidak mentes konfigurasi.\n"
-"Jelas, Anda ingin menjawab \"Tidak\" jika mesin Anda dijadikan server, atau\n"
-"jika Anda gagal mengkonfigurasi display."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"CDROM Mandrake Linux punya mode pertolongan built-in, yg bisa diakses dg\n"
-"mem-boot dari CDROM, tekan >>F1<< dan ketik >>rescue<< di prompt. Tapi jika\n"
-"komputer Anda tak dapat mem-boot dari CDROM, kembalilah ke tahap ini untuk\n"
-"pertolongan dalam setidaknya 2 situasi:\n"
-"\n"
-" * saat instalasi bootloader, DrakX akan menulis ulang sektor boot (MBR)\n"
-"disk utama Anda (kecuali jika Anda memakai manajer boot lain) sehingga Anda\n"
-"dapat menjalankan GNU/Linux atau Mindows (jika Anda punya Mindows di sistem\n"
-"Anda). Jika Anda menginstal Mindows lagi, proses instal micro$oft akan\n"
-"menulis ulang sektor boot, dan Anda takkan dapat menjalankan GNU/Linux!\n"
-"\n"
-" * jika ada masalah sehingga Anda tak dapat menjalankan GNU/Linux dari hard\n"
-"disk, disket ini adalah jalan satu-satunya utk menjalankan GNU/Linux. Ini\n"
-"berisi sejumlah alat utk mereparasi sistem yg rusak karena kegagalan power,\n"
-"salah ketik, alpa kata sandi, dan lain-lain.\n"
-"\n"
-"Bila step ini diklik, Anda akan diminta memasukkan disket ke drive. Disket\n"
-"harus kosong / berisi data yg tak Anda perlukan. Tak perlu diformat sebab\n"
-"DrakX akan menulis ulang seluruh disket."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Pada tahap ini, pilihlah tempat Mandrake Linux akan diinstal di harddisk.\n"
-"Bila harddisk masih kosong / ada sistem operasi lain yg mengisi seluruhnya,\n"
-"Anda perlu melakukan proses partisi. Pada dasarnya, proses partisi harddisk\n"
-"adalah membagi harddisk, dg membuat ruang kosong utk instalasi sistem\n"
-"Mandrake Linux.\n"
-"\n"
-"Karena bersifat satu arah (tak dapat dikembalikan ke keadaan awal), proses\n"
-"partisi dapat membuat stres dan pusing kepala, apalagi jika Anda belum\n"
-"berpengalaman. Untungnya, ada wizard yang mempermudah proses ini.\n"
-"Sebelum mulai, baca dan pelajari dulu buku manual dengan baik.\n"
-"\n"
-"Jika Anda menggunakan mode Ahli, Anda akan masuk DiskDrake, alat partisi\n"
-"Mandrake Linux, yg memungkinkan fine-tuning partisi Anda. Lihat manual bab\n"
-"DiskDrake. Dari antarmuka instalasi, Anda dapat menggunakan wizard seperti\n"
-"dijelaskan di sini dg meng-klik tombol \"Wizard\".\n"
-"\n"
-"Bila partisi-partisi tsb sudah ada sebelumnya (hasil instal sebelumnya\n"
-"atau hasil program partisi lain), pilihlah partisi tsb utk tempat instalasi\n"
-"sistem Linux Anda.\n"
-"\n"
-"Jika belum ada partisi, Anda perlu membuatnya dengan program wizard. Ada\n"
-"bbrp opsi tergantung konfigurasi harddisk Anda:\n"
-"\n"
-" * \"Pakai ruang kosong\": opsi ini akan secara otomatis mem-partisi drive\n"
-"kosong Anda. Anda takkan ditanya lebih jauh.\n"
-"\n"
-" * \"Pakai partisi yang sudah ada\": wizard mendeteksi satu/lebih partisi\n"
-"Linux di hard drive Anda. Jika Anda ingin menggunakannya, pilih opsi ini.\n"
-"\n"
-" * \"Pakai ruang kosong pada partisi Mindows\": jika wicrosoft mindows\n"
-"terinstal dan menghabiskan seluruh kapasitas disk, Anda perlu membuat ruang\n"
-"kosong untuk data Linux dg menghapus partisi dan data wicrosoft mindows\n"
-"(lihat solusi \"Hapus seluruh disk\" atau mode \"Ahli\") atau dapat juga\n"
-"mengubah ukuran partisi wicrosoft mindows. Cara ini dapat digunakan tanpa\n"
-"harus kehilangan data. Cara ini disarankan bila Anda ingin memakai Linux\n"
-"Mandrake dan wicrosoft mindows dlm satu komputer.\n"
-"\n"
-"   Sebelum memilih cara ini, mohon maklum bahwa partisi wicrosoft mindows\n"
-"sekarang berukuran lebih kecil. Ruang dlm wicrosoft mindows utk menyimpan\n"
-"data / menginstall software baru menjadi kecil.\n"
-"\n"
-" * \"Hapus seluruh disk\": jika Anda ingin hapus semua data dan partisi di\n"
-"harddisk Anda utk kemudian digantikan semuanya oleh sistem Mandrake Linux,\n"
-"pilih opsi ini. Hati-hati, Anda tak dapat kembali setelah konfirmasi.\n"
-"\n"
-"   !! Jika Anda pilih opsi ini semua data di disk Anda akan hilang. !!\n"
-"\n"
-" * \"Buang Mindows\": ini akan menghapus semua di drive dan mulai proses\n"
-"partisi dari nol. Semua data di disk akan hilang.\n"
-"\n"
-"   !! Jika Anda pilih opsi ini semua data di disk Anda akan hilang. !!\n"
-"\n"
-" * \"Mode ahli\": pilih jika Anda ingin secara manual mempartisi harddisk.\n"
-"Awas! Cara ini amat perkasa tapi juga berbahaya. Anda bisa kehilangan data\n"
-"dg mudah. Jangan pilih kecuali Anda tahu yg Anda lakukan."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Oke, instalasi kini selesai dan sistem GNU/Linux Anda siap dipakai. Klik\n"
-"\"OK\" utk reboot sistem. Anda dapat menjalankan GNU/Linux atau Windows,\n"
-"tergantung pilihan Anda (jika Anda memakai dual-boot).\n"
-"\n"
-"Tombol \"Tambahan\" (hanya di mode Ahli) menampilkan 2 tombol utk:\n"
-"\n"
-" * \"Membuat floppy instalasi otomatis\": utk membuat disket instalasi yang\n"
-"akan secara otomatis melakukan instalasi tanpa bantuan operator, sama dg\n"
-"instalasi yang baru Anda konfigurasikan.\n"
-"\n"
-"   Ada dua opsi setelah tombol di-klik:\n"
-"\n"
-"    * \"Ulang\". Instalasi semi-otomatis, hanya proses partisi yang tetap\n"
-"interaktif.\n"
-"\n"
-"    * \"Otomatis\". Instalasi otomatis penuh: harddisk ditulis ulang\n"
-"seluruhnya, semua data hilang.\n"
-"\n"
-"   Fitur ini amat praktis utk instalasi banyak mesin dg spesifikasi sama.\n"
-"Lihat pasal Auto install di website kami.\n"
-"\n"
-" * \"Menyimpan pilihan paket\"(*): simpan pilihan paket seperti yang dibuat\n"
-"sebelumnya. Lalu saat mengerjakan instalasi lain, masukkan floppy ke driver\n"
-"dan arahkan instalasi ke layar pertolongan dg menekan kunci [F1] lalu ketik\n"
-">>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Anda perlu floppy berformat FAT (utk membuatnya di GNU/Linux, jalankan\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Tiap-tiap partisi yang telah dibuat harus diformat agar dapat digunakan\n"
-"(format berarti membuat filesystem).\n"
-"\n"
-"Sekarang Anda bisa mem-format ulang partisi yg ada utk dihapus datanya.\n"
-"BIla ini hendak Anda lakukan, pilihlah partisi yang hendak diformat.\n"
-"\n"
-"Ingat, Anda tak perlu melakukan format ulang pada semua partisi yg ada.\n"
-"Anda perlu mem-format ulang partisi yg akan diisi sistem operasi (misalnya\n"
-"pada partisi \"/\", \"./usr\", atau \"/var\"), tapi tak perlu melakukannya\n"
-"pada partisi berisi data yang masih akan digunakan (misalnya \"/home\").\n"
-"\n"
-"Hati-hati dalam memilih partisi. Setelah diformat semua data akan hilang\n"
-"dan tak dapat dikembalikan ke kondisi semula.\n"
-"\n"
-"Klik \"OK\" bila Anda siap mem-format partisi.\n"
-"\n"
-"Klik \"Batal\" jika Anda ingin memilih partisi lain utk instalasi sistem\n"
-"operasi Mandrake Linux baru Anda.\n"
-"\n"
-"Klik \"Tambahan\" jika ingin memilih partisi yg akan dicek blok rusaknya\n"
-"di disk."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Sistem operasi Mandrake Linux baru Anda sedang di-instal.\n"
-"Proses ini memakan waktu beberapa menit/jam, tergantung ukuran yang\n"
-"Anda install dan kecepatan komputer Anda.\n"
-"\n"
-"Sabar..."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Saat Mandrake Linux diinstal, nampaknya beberapa paket telah diupdate sejak\n"
-"rilis awal. Beberapa kutu mungkin telah diperbaiki, dan masalah keamanan\n"
-"dipecahkan. Untuk memanfaatkan update ini Anda dianjurkan men-download dari\n"
-"internet. Pilih \"Ya\" jika ada koneksi internet aktif, atau \"Tidak\" jika\n"
-"ingin mengupdate paket lain waktu.\n"
-"\n"
-"Jika \"Ya\", daftar sumber download update akan ditampilkan. Pilih yang\n"
-"dekat. Lalu muncul pohon seleksi paket: lihat lagi pilihan Anda, tekan\n"
-"\"Instal\" untuk mengambil/nstal paket atau \"Batal\" jika tak jadi."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Sebelum melanjutkan Anda bacalah lisensi dg baik . Itu mencakup seluruh\n"
-"distribusi Mandrake Linux, dan jika Anda tak setuju dg semua pasal di\n"
-"dalamnya, klik \"Tolak\" agar instalasi terhenti. Untuk melanjutkan, klik\n"
-"\"Terima\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Kini waktunya memilih tingkat keamanan mesin. Makin terbuka suatu mesin,\n"
-"dan makin penting data di dalamnya, tingkat keamanannya harus makin tinggi.\n"
-"Tapi, level keamanan yang tinggi umumnya mengorbankan kemudahan pemakaian.\n"
-"Info ttg level keamanan dapat dilihat bab MSEC pada ``Manual Referensi''.\n"
-"\n"
-"Jika Anda tak tahu apa yg dipilih, tetaplah pada opsi standar."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Kini Anda perlu menentukan partisi yg akan dipakai utk instalasi sistem\n"
-"Mandrake Linux. Jika partisi telah didefinisikan, pada instalasi\n"
-"GNU/Linux sebelumnya atau dg alat partisi lain, Anda dapat memakai partisi\n"
-"yang ada. Jika tidak, partisi harddisk harus didefinisikan.\n"
-"\n"
-"Utk membuat partisi, pertama pilihlah harddisk. Anda dapat memilih disk utk\n"
-"dipartisi dg mengklik \"hda\" utk harddisk IDE pertama, \"hdb\" utk disk\n"
-"kedua, \"sda\" untuk drive SCSI pertama dst.\n"
-"\n"
-"Untuk mempartisi harddisk terpilih, opsi berikut dapat digunakan:\n"
-"\n"
-" * \"Hapus semua\": opsi ini menghapus semua partisi pd harddisk terpilih.\n"
-"\n"
-" * \"Alokasi otomatis\": opsi ini memungkinkan Anda secara otomatis membuat\n"
-"partisi Ext2 dan swap di ruang kosong hard drive Anda.\n"
-"\n"
-" * \"Tambahan\": akses ke fitur tambahan:\n"
-"\n"
-"    * \"Simpan tabel partisi\": simpan tabel partisi ke floppy. Berguna\n"
-"untuk pemulihan tabel-partisi di kemudian hari bila perlu. Amat disarankan.\n"
-"\n"
-"    * \"Pulihkan tabel partisi\": mengembalikan tabel partisi yg disimpan\n"
-"sebelumnya dari floppy.\n"
-"\n"
-"    * \"Selamatkan tabel partisi\": jika tabel partisi Anda rusak, cobalah\n"
-"mengembalikannya dg opsi ini. Hati-hati dan ingat bhw ini bisa gagal.\n"
-"\n"
-"    * \"Muat ulang tabel partisi\": buang semua perubahan dan muat tabel\n"
-"partisi semula.\n"
-"\n"
-"    * \"Mount otomatis media lepas\": Jika opsi ini dilepas, user harus\n"
-"secara manual me-mount/unmount media lepas seperti disket dan CD-ROM.\n"
-"\n"
-" * \"Wizard\": pilih ini jika ingin memakai wizard utk mempartisi harddisk.\n"
-"Disarankan jika Anda tak faham ttg partisi.\n"
-"\n"
-" * \"Kembali\": untuk membatalkan perubahan.\n"
-"\n"
-" * \"Ubah ke mode normal/ahli\": aksi tambahan proses partisi (tipe, opsi,\n"
-"format) dan informasi lebih.\n"
-"\n"
-" * \"Selesai\": simpan perubahan ke harddisk bila Anda selesai mempartisi.\n"
-"\n"
-"Catatan: Anda dapat meraih semua opsi dg memakai keyboard. Gunakan [Tab]\n"
-"dan panah [Up/Down].\n"
-"\n"
-"Saat partisi dipilih, Anda dapat menggunakan:\n"
-"\n"
-" * Ctrl-c utk membuat partisi baru (bila partisi kosong dipilih);\n"
-"\n"
-" * Ctrl-d utk menghapus partisi;\n"
-"\n"
-" * Ctrl-m utk menset titik mount\n"
-"\n"
-"Jika Anda menginstal mesin PPC Anda perlu membuat partisi \"bootstrap\" HFS\n"
-"kecil setidaknya 1MB yg akan dipakai oleh bootloader yaboot. Jika dibuat\n"
-"lebih besar, katakan 50MB, Anda bisa memanfaatkannya utk menyimpan kernel\n"
-"cadangan dan image ramdisk utk situasi boot darurat."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Ada lebih dari satu partisi wicrosoft mindows terdeteksi pada harddisk\n"
-"Anda. Pilih partisi yang hendak Anda ubah ukurannya untuk instalasi sistem\n"
-"operasi Linux Mandrake.\n"
-"\n"
-"Tiap partisi terdaftar sbb: \"Nama Linux\",\"Nama windows\",\"Kapasitas\".\n"
-"\n"
-"\"Nama Linux\" berstruktur: \"tipe hard drive\", \"nomor hard drive\",\n"
-"\"nomor partisi\" (misalnya \"hda1\").\n"
-"\n"
-"\"Tipe hard drive\" adalah \"hd\" bila drive bertipe IDE dan \"sd\" jika\n"
-"berupa drive SCSI.\n"
-"\n"
-"\"Nomor Hard Drive\", selalu berupa huruf setelah \"hd\" atau \"sd\". Jika\n"
-"berupa IDE, maka:\n"
-"\n"
-" * \"a\" berarti \"hard drive master pada kontroller IDE primer\",\n"
-"\n"
-" * \"b\" berarti \"hard drive slave pada kontroler IDE primer\",\n"
-"\n"
-" * \"c\" berarti \"hard drive master pada kontroler IDE sekunder\",\n"
-"\n"
-" * \"d\" berarti \"hard drive slave pada kontroler IDE sekunder\",\n"
-"\n"
-"Pada drive SCSI, \"a\" berarti \"ID SCSI terkecil, \"b\" berarti \"ID SCSI\n"
-"terkecil kedua\", dst.\n"
-"\n"
-"\"Nama windows\" adalah huruf hard drive Anda pada windows (disk pertama\n"
-"pada partisi disebut \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Sabar... Proses ini akan makan waktu beberapa menit"
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX kini perlu tahu Anda ingin instalasi standar (\"Disarankan\") atau\n"
-"ingin punya kontrol lebih besar (\"Ahli\"). Anda juga punya pilihan utk\n"
-"melakukan instalasi baru atau upgrade sistem Mandrake Linux yg ada:\n"
-"\n"
-" * \"Instal\" Hapus total sistem lama. Tergantung isi mesin Anda saat ini,\n"
-"Anda dapat mempertahankan partisi lama (Linux atau lainnya).\n"
-"\n"
-" * \"Upgrade\" Kelas instalasi ini memungkinkan update paket yang terinstal\n"
-"di sistem Mandrake Linux Anda. Partisi dan konfigurasi user yang ada tetap\n"
-"dipertahankan. Semua tahapan konfigurasi lain tetap ada seperti layaknya\n"
-"instalasi biasa.\n"
-"\n"
-" * \"Upgrade Paket Saja\" Kelas instalasi baru yang memungkinkan upgrade\n"
-"sistem Mandrake Linux tanpa mengubah konfigurasi sistem. Penambahan paket\n"
-"juga dimungkinkan.\n"
-"\n"
-"Upgrade dapat dilakukan terhadap sistem Mandrake Linux mulai versi \"8.1\".\n"
-"\n"
-"Pilihlah opsi berikut sesuai pengetahuan Anda ttg GNU/Linux:\n"
-"\n"
-" * Disarankan: pilih ini bila Anda belum pernah menginstal OS GNU/Linux.\n"
-"Proses instalasi amat mudah dan Anda hanya ditanya sedikit pertanyaan.\n"
-"\n"
-" * Ahli: Anda dapat memiilih kelas instalasi ini jika tahu banyak tentang\n"
-"GNU/Linux. Instalasi ahli memungkinkan Anda melakukan instalasi bebas.\n"
-"Bbrp pertanyaan sulit dijawab jika Anda tak berpengetahuan kuat tentang\n"
-"GNU/Linux. Jangan pilih kelas ini kecuali Anda tahu apa yang Anda lakukan."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalnya, DrakX memilih papanketik utk Anda (sesuai bahasa yg Anda pilih)\n"
-"dan Anda bahkan takkan melihat tahap ini. Tapi Anda mungkin tak punya papan\n"
-"ketik yg persis cocok dg bhs Anda: misalnya, jika Anda orang Swis berbahasa\n"
-"Inggris, Anda mungkin masih ingin keyboard Swis. Atau jika Anda berbahasa\n"
-"Inggris tapi tinggal di Quebec, Anda mungkin menghadapi masalah sama. Dalam\n"
-"kedua kasus, Anda akan harus kembali ke tahap instalasi ini dan memilih\n"
-"keyboard yg sesuai dari daftar.\n"
-"\n"
-"Klik \"Lagi\" utk menampilkan daftar lengkap keyboard ter-support."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Pilih bahasa kesukaan Anda utk instalasi dan penggunaan sistem.\n"
-"\n"
-"Klik \"Tambahan\" utk memilih bahasa-bahasa lain yg akan diinstal di\n"
-"workstation Anda. Hal ini akan menginstal file spesifik-bahasa dokumentasi\n"
-"sistem dan aplikasi. Misalnya jika Anda menginapkan user dari Spanyol di\n"
-"mesin Anda, pilih bhs Indonesia sbg bahasa utama di tampilan pohon dan di\n"
-"bagian Tambahan klik bintang abu-abu yg terkait dg \"Spanyol\".\n"
-"\n"
-"Anda dapat menginstal banyak bahasa. Setelah Anda selesai memilih tambahan\n"
-"bahasa (locale) klik \"OK\" untuk melanjutkan."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Secara standar DrakX berasumsi mouse Anda bertombol dua dan akan menset-up\n"
-"emulasi 3-tombol. DrakX otomatis tahu itu mouse PS/2, serial atau USB.\n"
-"\n"
-"Jika Anda ingin menunjuk tipe mouse lain, pilih tipe yg sesuai dari daftar\n"
-"yang disediakan.\n"
-"\n"
-"Jika Anda memilih mouse bukan standar, Anda akan dihadapkan pada layar tes\n"
-"mouse. Gunakan tombol dan roda untuk verifikasi setting. Jika mouse tak\n"
-"bekerja baik tekan spasi atau RETURN untuk \"Batal\" dan pilih lagi."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Pilih port yang benar. Misalnya \"COM1\" di Mindows bernama \"ttyS0\" di \n"
-"GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Ini adalah poin terpenting penentuan sekuriti sistem GNU/Linux Anda: Anda\n"
-"harus mengisi katasandi \"root\". \"root\" adalah administrator sistem dan\n"
-"hanya dia yg berhak melakukan update, menambah user, mengubah konfigurasi\n"
-"sistem, dll. Singkatnya, \"root\" dapat melakukan apapun! Karena itu Anda\n"
-"harus memilih katasandi yang sulit ditebak - DrakX akan memberitahu jika\n"
-"terlalu mudah. Seperti Anda lihat, Anda dapat memilih utk tak memasukkan\n"
-"katasandi, tapi amat kami anjurkan tidak melakukannya jika alasannya hanya:\n"
-"tidak mengira bhw jika GNU/Linux di-boot, sistem operasi lain aman dari\n"
-"kesalahan. Karena \"root\" dapat melampaui semua batasan dan secara tidak\n"
-"sengaja menghapus semua data di partisi, menjadi \"root\" harus dipersulit.\n"
-"\n"
-"Katasandi harus berupa campuran nomor dan huruf minimal 8 karakter. Jangan\n"
-"pernah mencatat katasandi \"root\" - itu membuat sistem mudah dibajak.\n"
-"\n"
-"Tapi katasandi juga jangan terlalu panjang/rumit karena Anda harus ingat\n"
-"tanpa banyak usaha.\n"
-"\n"
-"Katasandi takkan muncul di layar seperti yg diketikkan. Anda harus dua kali\n"
-"mengisi katasandi utk mengurangi kemungkinan salah ketik. Jika Anda 2 kali\n"
-"melakukan kesalahan yg sama, katasandi \"salah\" ini akan dipakai pertama\n"
-"kali anda login.\n"
-"\n"
-"Pada mode ahli, Anda akan ditanya apakah akan berhubungan dengan server\n"
-"otentikasi seperti NIS atau LDAP.\n"
-"\n"
-"Jika jaringan Anda memakai protokol otentikasi LDAP/NIS, pilih \"LDAP\"\n"
-"(atau \"NIS\") utk otentikasi. Tanyalah admin jaringan Anda jika tak tahu.\n"
-"\n"
-"Jika komputer Anda tak terhubung dengan jaringan terkelola, pilihlah\n"
-"\"File lokal\" untuk otentikasi."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO/GRUB adalah pemuat boot GNU/Linux. Step ini biasanya otomatis penuh.\n"
-"DrakX menganalisa sektor boot disk dan beraksi menurut apa yg ditemukan:\n"
-"\n"
-" * jika sektor boot Mindows ditemukan, ia akan menggantinya dg sektor boot\n"
-"GRUB/LILO. Jadi Anda akan dapat memuat baik GNU/Linux maupun OS lain;\n"
-"\n"
-" * jika sektor boot GRUB/LILO ditemukan, ia akan menggantinya dg yg baru;\n"
-"\n"
-"Jika ragu, DrakX akan menampilkan dialog dengan opsi bervariasi.\n"
-"\n"
-" * \"Pemuat boot yang digunakan\": ada tiga pilihan:\n"
-"\n"
-"    * \"GRUB\": jika Anda suka GRUB (menu teks).\n"
-"\n"
-"    * \"LILO dengan menu grafis\": jika Anda suka LILO dg antarmuka grafis.\n"
-"\n"
-"    * \"LILO dengan menu teks\": jika suka LILO dengan antarmuka menu teks.\n"
-"\n"
-" * \"Device boot\": Umumnya Anda takkan mengubah standar (\"/dev/hda\"),\n"
-"tapi jika suka, bootloader dapat diinstal di harddisk kedua (\"/dev/hdb\"),\n"
-"ataupun disket (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay sebelum boot ke image default\": delay yang diberikan di menu\n"
-"pemuat boot kepada user saat me-reboot komputer untuk memilih entri.\n"
-"\n"
-"!! Awas, jika pemuat boot tak diinstal (dg memilih \"Cancel\" di sini),\n"
-"pastikan Anda punya jalan memboot sistem Mandrake Linux Anda! Juga pastikan\n"
-"bahwa Anda tahu apa yang Anda lakukan sebelum mengubah opsi. !!\n"
-"\n"
-"Klik \"Tambahan\" untuk menampilkan opsi lain, yg disediakan utk user ahli.\n"
-"\n"
-"Setelah parameter pemuat-boot dikonfigurasikan, ditampilkan daftar opsi\n"
-"boot yang akan muncul saat boot.\n"
-"\n"
-"Jika ada OS lain terinstal di mesin Anda, itu akan otomatis ditambahkan ke\n"
-"menu boot. Di sini Anda dapat memperbaiki opsi yang ada. Pilih entri dan\n"
-"klik \"Modifikasi\" untuk mengubah atau menghapusnya; \"Tambah\"\n"
-"membuat masukan baru; dan \"Selesai\" membawa Anda ke tahap instalasi\n"
-"berikutnya."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) dan Grub adalah pemuat boot. Dua-duanya dapat mem-boot\n"
-"GNU/Linux atau sistem operasi lain yang ada di komputer Anda.\n"
-"Biasanya, sistem operasi yang sudah ada akan dideteksi secara benar dan\n"
-"diinstallkan. Bila ternyata salah, Anda dapat menambahkan sendiri di layar\n"
-"ini. Hati-hati dalam memilih parameter yang benar.\n"
-"\n"
-"Anda mungkin ingin agar tak ada yg dapat mengakses sistem operasi lain ini.\n"
-"Anda dapat menghapus entrinya. Tapi untuk bisa masuk ke sistem operasi tsb.\n"
-"Anda perlu bootdisk nantinya."
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Anda harus menentukan tempat meletakkan info boot GNU/Linux.\n"
-"\n"
-"\n"
-"Kalau Anda kurang tahu, pilih saja \"Sektor pertama di drive (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Kini kita pilih sistem cetak komputer Anda. OS lain mungkin punya satu,\n"
-"Mandrake menyediakan tiga.\n"
-"\n"
-" * \"pdq\" - artinya ``print, djangan nqantri'', adalah pilihan jika Anda\n"
-"punya koneksi langsung ke printer Anda dan ingin bebas dari panik kemacetan\n"
-"printer, serta tak punya printer jaringan. Ia akan meng-handle hanya kasus\n"
-"jaringan yg amat mudah dan agak lambat utk network. Ambil \"pdq\" jika ini\n"
-"kali pertama Anda mengenal GNU/Linux. Anda dapat mengubah pilihan setelah\n"
-"instalasi dg menjalankan PrinterDrake dari Pusat Kontrol Mandrake dan\n"
-"meng-klik tombol expert/ahli.\n"
-"\n"
-" * \"CUPS\"``Sistem Cetak Unix Umum'' canggih untuk mencetak ke printer\n"
-"lokal dan juga separuh planet. Mudah dan berfungsi spt server/klien utk\n"
-"sistem cetak kuno \"lpd\" jadi kompatibel dg sistem lama. Banyak trik dapat\n"
-"dilakukan, tapi setup awalnya hampir semudah \"pdq\". Jika Anda perlu ini\n"
-"utk emulasi server \"lpd\", Anda harus menyalakan daemon \"cups-lpd\".\n"
-"Front-end grafis disediakan utk pencetakan/pemilihan opsi printer.\n"
-"\n"
-" * \"lprNG\"``daemon printer baris Generasi Baru''. Sistem ini dapat\n"
-"melakukan hal yg mirip dg yg bisa dilakukan sistem lain, hanya saja ia akan\n"
-"mencetak ke printer yang terhubung dengan network Novell, karena mensupport\n"
-"protokol IPX, dan bisa mencetak langsung ke perintah shell. Jika Anda perlu\n"
-"Novell atau mencetak ke perintah tanpa memakai konstruksi pipa terpisah,\n"
-"gunakan lprNG. Jika tidak, pilihlah CUPS sebab lebih mudah dan bekerja baik\n"
-"di network."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX sedang mendeteksi perangkat IDE komputer Anda, juga men-scan kartu\n"
-"SCSI PCI di sistem Anda. Jika kartu SCSI ditemukan DrakX akan otomatis\n"
-"meng-instal driver yang sesuai.\n"
-"\n"
-"Karena perangkat keras terkadang tak terdeteksi, DrakX akan bertanya apakah\n"
-"ada kartu SCSI PCI. Klik \"Ya\" jika Anda tahu ada kartu SCSI terinstal di\n"
-"mesin Anda. Akan disajikan list kartu SCSI utk dipilih. Klik \"Tidak\" jika\n"
-"tak ada hardware SCSI. Jika Anda tak yakin, periksa daftar perangkat keras\n"
-"yang terdeteksi di mesin Anda dg memilih \"Lihat info hardware\" lalu klik\n"
-"\"OK\". Periksa daftar hardware lalu klik \"OK\" utk kembali.\n"
-"\n"
-"Jika Anda harus menunjuk adaptor secara manual, DrakX akan bertanya apakah\n"
-"Anda ingin menunjuk opsi untuknya. Anda harus mengizinkan DrakX mem-probe\n"
-"hardware utk opsi spesifik-kartu yg diperlukan hardware utk inisiasi. Ini\n"
-"biasanya bekerja baik.\n"
-"\n"
-"Jika DrakX gagal mem-probe opsi yang harus diberikan, Anda perlu memberikan\n"
-"opsi ke driver secara manual. Baca ``User Guide'' (bab 3, bag. \"Collecting\n"
-"information on your hardware\") utk trik mendapat parameter yg dibutuhkan\n"
-"dari dokumentasi hardware, website pabrik (jika Anda punya akses Internet)\n"
-"atau wicrosoft mindows (jika Anda memakai hardware ini di windows)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Anda dapat menambahkan entri yaboot, baik untuk OS lain, kernel lain, atau\n"
-"untuk image boot darurat.\n"
-"\n"
-"Untuk OS lain, entri hanya berisi label dan partisi root.\n"
-"\n"
-"Untuk Linux, ada beberapa pilihan:\n"
-"\n"
-" * Label: nama yg harus diketik di prompt yaboot utk memilih opsi boot ini.\n"
-"\n"
-" * Image: nama kernel untuk diboot. Biasanya bernama vmlinux atau nama lain\n"
-"yang mirip dengan vmlinux atau ditambahkan ekstensi lain.\n"
-"\n"
-" * Root: device \"root\" atau \"/\" untuk instalasi Linux Anda.\n"
-"\n"
-" * Append: pada hardware Apple, opsi append kernel sering digunakan untuk\n"
-"menolong inisialisasi hardware video, atau pengaktifan emulasi tombol mouse\n"
-"pada keyboard utk mouse Apple yang tidak memiliki tombol kedua dan ketiga.\n"
-"Berikut adalah beberapa contohnya:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: opsi ini bisa dipakai utk memuat modul awal sebelum device boot\n"
-"tersedia, atau untuk memuat image ramdisk untuk situasi boot darurat.\n"
-"\n"
-" * Initrd-size: standar ukuran ramdisk biasanya 4096 byte. Jika Anda perlu\n"
-"mengalokasikan ramdisk yang lebih besar, gunakan opsi ini.\n"
-"\n"
-" * Read-write: umumnya partisi \"root\" diberikan secara readonly agar bisa\n"
-"dilakukan pengecekan filesystem sebelum sistem \"hidup\". Di sini Anda bisa\n"
-"mengubah kelakuan aslinya.\n"
-"\n"
-" * NoVideo: Jika hardware video Apple problematis, Anda dapat memakai opsi\n"
-"ini utk mem-boot dalam mode \"novideo\", dengan support framebuffer native.\n"
-"\n"
-" * Default: opsi standar Linux, dapat dipilih hanya dg menekan ENTER pada\n"
-"prompt yaboot. Entri ini juga akan ditandai \"*\" jika Anda menekan [Tab]\n"
-"untuk melihat pilihan boot."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot adalah pemuat boot utk hardware NewWorld MacIntosh. Ia mampu memboot\n"
-"GNU/Linux, MacOS maupun MacOSX jika terdapat di komputer Anda. Biasanya,\n"
-"OS lain ini terdeteksi dan terinstal dengan benar. Jika tidak, Anda dapat\n"
-"menambahkan entry secara manual di layar ini. Hati-hati memilih parameter.\n"
-"\n"
-"Opsi utama yaboot adalah:\n"
-"\n"
-" * Pesan Awal: pesan teks yang ditampilkan sebelum prompt boot.\n"
-"\n"
-" * Device Boot: menunjukkan tempat Anda ingin meletakkan info yg diperlukan\n"
-"utk memboot GNU/LInux. Biasanya Anda men-setup partisi bootstrap lebih dulu\n"
-"untuk menyimpan informasi ini.\n"
-"\n"
-" * Delay Open Firmware: tak seperti LILO, ada dua macam delay tersedia di\n"
-"yaboot. Delay pertama diukur dalam detik dan di sini Anda bisa memilih CD,\n"
-"boot OF, MacOS, atau Linux.\n"
-"\n"
-" * Timeout Boot Kernel: timeout ini mirip delay boot LILO. Setelah memilih\n"
-"Linux, akan ada delay 0.1 detik sebelum kernel default Anda dipilih.\n"
-"\n"
-" * Aktifkan boot CD?: opsi ini memungkinkan Anda memilih \"C\" (CD) pada\n"
-"prompt boot pertama.\n"
-"\n"
-" * Aktifkan boot OF?: dg opsi ini Anda bisa memilih \"N\" (Open Firmware)\n"
-"saat prompt boot pertama.\n"
-"\n"
-" * OS Standar: Anda dapat memilih OS yang akan diboot secara default saat\n"
-"delay Open Firmware terlampaui."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Di sini disajikan macam-macam parameter mesin Anda. Tergantung hardware yg\n"
-"ter-instal, Anda dapat - atau tidak, melihat entri berikut:\n"
-"\n"
-" * \"Mouse\": cek konfigurasi mouse, klik tombol utk mengubahnya bila perlu\n"
-"\n"
-" * \"Keyboard\": cek konfigurasi map keyboard, klik tombol utk mengubahnya\n"
-"bila perlu.\n"
-"\n"
-" * \"Zona waktu\": DrakX menerka zona waktu Anda dari bahasa yg Anda pilih.\n"
-"Tapi sekali lagi seperti pilihan keyboard, Anda mungkin tak berada di negri\n"
-"yang selaras dg bahasa terpilih. Jadi Anda mungkin perlu menekan tombol\n"
-"\"Zona waktu\" utk mengkonfigurasikan jam sesuai zona waktu tempat Anda.\n"
-"\n"
-" * \"Printer\": klik \"No Printer\" utk membuka dukun konfigurasi printer.\n"
-"\n"
-" * \"Kartu suara\": kartu suara terdeteksi di sistem Anda akan ditampilkan\n"
-"di sini. Tiada modifikasi yg dapat dilakukan saat instalasi.\n"
-"\n"
-" * \"Kartu TV\": kartu TV yg terdeteksi di sistem Anda akan ditampilkan di\n"
-"sini. Tiada modifikasi yg dapat dilakukan saat instalasi.\n"
-"\n"
-" * \"Kartu ISDN\": kartu ISDN yg terdeteksi di sistem Anda akan ditampilkan\n"
-"di sini. Anda dapat meng-klik tombol utk mengubah parameternya."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Pilih harddrive yg akan dihapus utk disediakan bagi partisi\n"
-"Linux Mandrake. Hati-hati, semua data di situ akan hilang dan\n"
-"tak dapat dikembalikan seperti semula!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klik \"OK\" bila Anda ingin menghapus semua data dan partisi yang ada di\n"
-"hard drive ini. Awas, setelah mengklik \"OK\" Anda tak dapat mengembalikan\n"
-"data dan partisi di drive ini termasuk data windows.\n"
-"\n"
-"Pilih \"Batal\" utk membatalkan aksi ini tanpa kehilangan data dan partisi\n"
-"yang ada dalam hard drive ini."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Gagal mengakses modul kernel yang cocok (file %s hilang), ini umumnya "
-"berarti bahwa disket boot Anda tak sinkron dengan  media instalasi (buatlah "
-"disket boot baru"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Anda harus juga memformat %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Anda memilih server berikut: %s\n"
-"\n"
-"Server ini aktif sesuai standar. Sementara ini tiada kabar ttg sekuritas,\n"
-"tapi mungkin ada yg telah ditemukan. Jika terjadi, upgrade-lah selekas "
-"mungkin.\n"
-"\n"
-"Jadi instal server ini?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Tanpa domain NIS, broadcast tak dapat dipakai"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Masukkan disket yang sudah diformat dengan tipe FAT di drive %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Disketnya belum diformat dengan sistem FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Untuk menggunakan pilihan paket yang sudah disimpan sebelumnya, bootlah "
-"instalasi dengan pilihan ''linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Error saat membaca file %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Ada hardwaare di komputer ini yang membutuhkan driver ``proprietary''.\n"
-"Anda bisa mencari informasinya di: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Pilih dulu partisi rootnya.\n"
-"Caranya, buatlah partisi (atau pilih di yang sudah ada).\n"
-"Lalu pilih ``Mount point'' dan set ke `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Anda harus buat partisi swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Anda belum punya partisi swap\n"
-"\n"
-"Jalan terus?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Anda harus punya partisi FAT termount pada /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Pakai ruang kosong"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Tidak ada cukup ruangan untuk mengalokasikan partisi baru"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Pakai partisi yang sudah ada"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Tidak ada partisi yang bisa digunakan"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Gunakan partisi windows untuk loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Partisi mana yang hendak dipakai oleh Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Pilih ukurannya"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Ukuran partisi root dalam MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Ukuran partisi swap dalam MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Pakai ruang kosong pada partisi windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "partisi mana yang mau Anda ubah ukurannya?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Sedang menghitung bound filesystem windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Saya tidak dapat mengubah ukuran partisi FAT ini,\n"
-"Ada error ini yang terjadi: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Partisi windows Anda terlalu terfragmen, jalankan ``defrag'' dulu"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"AWAS!\n"
-"\n"
-"DrakX sekarang hendak mengubah ukuran partisi Mindows Anda. Hati-hati:\n"
-"proses ini amat berbahaya. Bila Anda belum melakukannya, silakan\n"
-"keluar dari proses instalasi ini, lalu reboot ke windows\n"
-"jalankan scandisk (dan defrag juga) di partisi ini lalu backup datanya.\n"
-"Setelah yakin, tekan Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Tentukan ukuran untuk menyimpan windows"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "Partisi %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Resize FAT gagal: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Tidak ada partisi FAT untuk diubah ukurannya atau untuk digunakan sebagai "
-"loopback (atau tidak ada cukup ruangan)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Hapus seluruh disk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Buang windows"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Anda punya beberapa harddisk, yang mana yang ingin di-instal linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "SEMUA partisi yang ada beserta data pada drive %s akan hilang"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Lakukan partisi disk secara custom"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "gunakan fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Anda bisa buat partisi %s \n"
-"Habis itu, jangan lupa simpan dengan menekan tombol `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Eh, Anda tak punya cukup ruangan pada partisi windows!"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Aduh, ruangannya tak cukup nih untuk menginstall"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Wizard partisi DrakX menemukan solusi berikut:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Proses partisi gagal: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Up-kan Jaringan"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Matikan Jaringan"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ada error nih, tapi aku tak tahu cara mengatasinya.\n"
-"Lanjutkan saja, tapi resiko tanggung sendiri yah."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Lokasi mount %s ada dua"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Ada paket yang penting tak benar diinstalnya.\n"
-"Mungkin saja drive cdrom atau cdromnya yang rusak.\n"
-"Cek dulu cdromnya di komputer yang sudah terinstall Linux dengan\n"
-"perintah \"rpm -qpl Mandrake/RPMS/*.rpm\" dulu gih\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Selamat Datang di %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Wah maaf nih, tak ada floppy drive yah ?"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Memulai langkah `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Sumber daya sistem Anda rendah. Nantinya Anda akan sulit menginstal\n"
-"Linux-Mandrake. Cobalah instalasi text. Untuk hal ini silakan\n"
-"tekan `F1' saat booting pada CDROM, lalu ketikkan `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Kelas Instal"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Pilihlah kelas instalasi berikut:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ukuran total grup yang dipilih kira-kira %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Kalau Anda mau nginstall dengan ukuran yang lebih kecil dari ini,\n"
-"pilih dulu persentase paket yang hendak diinstall.\n"
-"\n"
-"Persentasi kecil berarti akan install paket yang penting-penting saja;\n"
-"dan sebaliknya persentase 100%% akan install semua paket yang tadi sudah\n"
-"dipilih"
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Anda punya hard disk cuma cukup untuk sekitar %d%% dari seluruh paketini.\n"
-"\n"
-"Kalau Anda mau nginstall dengan ukuran yang lebih kecil dari ini,\n"
-"pilih dulu persentase paket yang hendak diinstall.\n"
-"Persentasi kecil berarti akan install paket yang penting-penting saja;\n"
-"dan sebaliknya persentase %d%% akan install paket yang tadi sudah\n"
-"dipilih sebanyak-banyaknya"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Anda akan bisa memilih dengan lebih lengkap nanti"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Persentase paket yang akan diinstall"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Pilihan Grup Paket"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Pilih paket sendiri"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukuran total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Paket Error"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nama: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versi: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Ukuran: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Derajat: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Anda tak bisa pilih paket ini sebab tak ada ruang kosong untuk menginstallnya"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Paket ini yang akan diinstall"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Paket berikut adalah yang akan dihapus"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Anda tak bisa pilih/buang paket ini"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Paket ini harus diinstall, tak bisa dibuang"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Anda tak bisa buang paket ini, sebab dia sudah diinstall"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Paket ini mesti diupgrade\n"
-"Benar tak mau dipilih?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Anda tak bisa buang paket ini. dia mesti diupgrade"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Tunjukkan paket yang sudah dipilih secara otomatis"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instal"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Muat/Simpan di floppy"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Update pilihan paket"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Instalasi minimal"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Pilih paket yang akan diinstal"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalasi"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Perkiraan"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Sisa waktu "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Tunggu ya, saya sedang menyiapkan instalasi"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paket"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Sedang instal paket %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Terima"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Tolak"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Ganti CDROM!\n"
-"\n"
-"Silakan masukkan CDROM berlabel \"%s\" di drive Anda dan tekan OK\n"
-"Kalau Anda tak punya CDROM ini, tekan Batal aja untuk membatalkan instalasi "
-"dari CD ini."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Cuek aja?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Ada error mengurutkan paket"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Ada error saat menginstall paket"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Peringatan\n"
-"\n"
-"Mohon dibaca dulu semua ketentuan di bawah. Bila Anda tidak setuju dengan "
-"salah satu bagiannya\n"
-"Anda tidak dapat menginstal media CD berikutnya. Silakan tekan 'Tolak' untuk "
-"melanjutkan instalasi\n"
-"tanpa menggunakan media ini.\n"
-"\n"
-"\n"
-"Ada beberapa komponen yang ada di media CD berikutnya tidak dilepas dalam "
-"lisensi GPL atau perjanjian\n"
-"sejenis. Komponen-komponen itu diatur dalam ketentuan dan kondisi dalam "
-"lisensi yang bersangkutan.\n"
-"Baca dengan hati-hati dan penuhi setiap lisensi sebelum Anda menyebarkan "
-"komponen tersebut.\n"
-"Model lisensi tersebut akan melarang proses transfer, duplikasi (kecuali "
-"untuk alasan backup), penyebaran\n"
-"kembali, rekayasa ulang, de-assembly, de-kompilasi, atau modifikasi pada "
-"komponen tersebut.\n"
-"Tiap pelanggaran pada perjanjian akan segera mengakhiri hak-hak Anda dalam "
-"lisensi tersebut.\n"
-"Kecuali bila dibolehkan, Anda tidak dapat menginstall program ini dalam "
-"lebih dari satu sistem\n"
-"atau menggunakannya di jaringan. Bila Anda masih ragu, silakan huibungi "
-"langsung distributor\n"
-"atau editor komponen ini. Anda dilarang mentransfer komponen ini ke pihak "
-"ketiga atau mengkopinya.\n"
-"\n"
-"\n"
-"Semua hak pada komponen di media CD berikutnya dimiliki oleh pembuatnya "
-"masing-masing\n"
-"dan dilindungi oleh hukum hak cipta dan hak intelektual khusus untuk program "
-"komputer.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ada error"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Anda ingin tinggalkan instalasi?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Persetujuan Lisensi"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Linux-"
-"Mandrake distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Linux-Mandrake distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Linux-Mandrake sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Keyboard"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Pilih layout keyboard Anda"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Ini adalah daftar keyboard yang tersedia"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Kelas instalasi yang anda diinginkan?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instal/Update"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Akan instal atau update?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Disarankan"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ahli"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Upgrade"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Hanya upgrade paket"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Pilihlah tipe mouse Anda."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port Mouse"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Di serial port mana mouse Anda dicolokkan ?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulasi tombol"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulasi 2 tombol"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulasi tombol 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurasikan card PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "konfigurasi IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "Tidak ada partisi"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Mendeteksi partisi untuk mencari lokasi mount"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Pilih lokasi mount"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Saya tak bisa baca tabel partisi, udah hancur lebur nih :(\n"
-"Aku akan coba hapus partisi yg jeleknya (SEMUA DATA akan HILANG).\n"
-"Solusi lainnya adalah jangan biarkan saya memodifikasi tabel partisi.\n"
-"(pesan errornya adalah %s)\n"
-"\n"
-"Anda setuju untuk menghapus semua partisi?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake gagal membaca tabel partisi Anda.\n"
-"Lanjutkan tapi resiko tanggung sendiri!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Tiada ruang 1MB utk bootstrap! Instal akan berlanjut, tetapi utk mem-boot "
-"sistem, Anda perlu membuat partisi bootstrap di DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Tiada partisi root tertemukam utk upgrade"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partisi root"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Manakah partisi root (/) di sistem Anda?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Anda harus reboot agar perubahan table partisi dapat berlaku"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Pilih partisi yang akan diformat"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Periksa bad blok?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Melakukan format partisi"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Membuat dan memformat file %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Instalasi tidak bisa diteruskan karena swap kurang, tambahin dong"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Sedang mencari paket yang tersedia"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Mencari paket untuk diupgrade"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Sistem ini tak punya cukup space untuk install atawa upgrade (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Lengkap (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Disarankan (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Pilih muat/simpan seleksi paket di floppy.\n"
-"Formatnya sama dengan floppy buatan auto_install."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Muat dari floppy"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Memuat dari floppy"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Pilihan paket"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Masukkan disket yg berisi seleksi paket"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Simpan di floppy"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Ukuran terpilih melebihi area yg ada"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Tipe instalasi"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Anda belum memilih grup paket.\n"
-"Pilih instalasi minimal yang Anda ingin:"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Dengan X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Dengan dokumentasi dasar (disarankan!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Sungguh instalasi minimal (khususnya tanpa urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Kalau Anda punya semua CD pada daftar di bawah, tekan OK.\n"
-"Kalau tak punya sama sekali, click Cancel.\n"
-"Kalau cuma punya beberapa aja, pilih aja, trus klik Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Label CD-ROM \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Sedang menyiapkan instalasi"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Sedang instal paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Konfigurasi Instalasi akhir"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Masukkan floppy boot ke drive %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Masukkan disket Update Modules ke drive %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Anda sekarang bisa mendownload software khusus untuk enkripsi.\n"
-"\n"
-"PERHATIAN:\n"
-"\n"
-"Berhubung adanya peraturan yang berbeda di berbagai lokasi berkenaan\n"
-"dengan penggunaan software ini, Anda dan/atau end user yang akan\n"
-"menggunakan software ini harus memastikan bahwa dirinya boleh untuk\n"
-"mendownload dan/atau menggunakan software ini sesuai dengan hukum\n"
-"yang berlaku di lokasinya.\n"
-"\n"
-"Juga ditekankan bahwa Anda dan/atau end user harus sadar bahwa dirinya\n"
-"tidak diperkenankan untuk melanggar hukum tersebut. Apabila melanggar\n"
-"akan dikenakan sangsi yang berat.\n"
-"\n"
-"Mandrakesoft dan para pembuat software dan/atau penyedianya sama sekali "
-"tidak\n"
-"bertanggung jawab baik untuk segala kerusakan khusus, tidak langsung, dan\n"
-"insidentil apapun (termasuk namun tidak terbatas pada kehilangan keuntungan\n"
-"gangguan bisnis, kehilangan data komersial dan kerugian lain dan \n"
-"segala kewajiban yang harus dibayarkan sesuai hukum) yang disebabkan\n"
-"oleh penggunaan, kepemilikan, atau penjualan dari software yang\n"
-"didownload ini, setelah Anda dan/atau end user memiliki akses\n"
-"ke software tersebut setelah menandatangani perjanjian yang ada.\n"
-"\n"
-"Apabila ada pertanyaan mengenai perjanjian ini, silakan hubungi\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Anda kini dapat men-download paket terupdate yg dirilis pasca distribusi.\n"
-"\n"
-"Anda akan mendapat pembetulan keamanan/kutu, tapi Anda perlu punya koneksi\n"
-"Internet terkonfigurasi utk melanjutkan.\n"
-"\n"
-"Ingin instal update ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Mandrake Linux sedang dihubungi untuk mengambil daftar mirror"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Pilih mirror tempat Anda ingin mengambil paket program"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Saya sedang mencek mirror untuk mengambil daftar paket yang tersedia"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Pilih timezone Anda"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Jam hardware diset ke GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "sinkronisasi waktu otomatis (dg NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Server NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "server CUPS remote"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Tidak ada printer"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Anda punya kartu suara ISA?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Jalankan \"sndconfig\" setelah instalasi untuk konfigurasi kartu suara"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Kartu suara tak terdeteksi. Coba \"harddrake\" setelah instalasi"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Ringkasan"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mouse"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Timezone"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "kartu ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Sound Card"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV Card"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "File lokal"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Set katasandi root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Tak berkatasandi"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Katasandinya terlalu mudah (harus paling tidak %d karakter)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentikasi"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Otentikasi LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "Basis dn LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Server LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Otentikasi NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Domain NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Server NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Bootdisk baru membantu Anda untuk melakukan boot sistem Linux tanpa\n"
-"tergantung pada bootloader. Kadang ini berguna bila Anda tidak mau install\n"
-"SILO  di sistem Anda, atau saat sistem operasi lain menghapus SILO, atau "
-"SILO\n"
-"tidak bisa digunakan pada konfigurasi hardware Anda. Bootdisk ini juga bisa "
-"digunakan\n"
-"dengan image rescue Mandrake, yang memudahkan kita untuk merecover sistem\n"
-"dari kegagalan. Sekarang, saya mau tanya nih... mau bikin bootdisk nggak ?"
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Drive Disket Pertama"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Drive disket kedua"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Lewatkan"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Bootdisk baru membantu Anda untuk melakukan boot sistem Linux tanpa\n"
-"tergantung pada bootloader. Kadang ini berguna bila Anda tidak mau install\n"
-"lilo (ataw grub) di sistem Anda, atau saat sistem operasi lain menghapus "
-"lilo, atau lilo\n"
-"tidak bisa digunakan pada konfigurasi hardware Anda. Bootdisk ini juga bisa "
-"digunakan\n"
-"dengan image rescue Mandrake, yang memudahkan kita untuk merecover sistem\n"
-"dari kegagalan. Sekarang, saya mau tanya nih... mau bikin bootdisk nggak ?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(PERINGATAN! Anda menggunakan XFS untuk partisi root,\n"
-"pembuatan bootdisk di disket 1.44 Mb mungkin gagal,\n"
-"karena XFS perlu driver amat besar)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Tiada floppy drive tersedia"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Pilih drive floppy untuk membuat bootdisk"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Masukkan disket di %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Membuat bootdisk"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Membuat bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Nampaknya Anda punya mesin DuniaLama/TakJelas.\n"
-"Bootloader yaboot takkan bekerja.\n"
-"Instal akan berlanjut, tapi Anda perlu memakai\n"
-"BootX utk mem-boot mesin Anda"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Ingin pakai aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Ada error saat install aboot,\n"
-"paksakan instalasi walau merusak partisi awal?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instalasi bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalasi bootloader gagal. Ada kesalahan berikut:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Gantilah bootdevice Open Firmware untuk mengaktifkan bootloader.\n"
-" Jika Anda tak melihat prompt bootloader saat reboot, tekan\n"
-" Command-Option-O-F saat reboot dan ketik:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" kemudian: shut-down\n"
-"Anda akan melihat prompt bootloader pada boot selanjutnya."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Masukkan disket kosong di drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Lagi buat disket auto install"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Ada tahapan yang tidak diselesaikan.\n"
-"\n"
-"Anda ingin keluar sekarang?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Selamat, instalasi selesai.\n"
-"Cabut media boot dan tekan Return/Enter untuk reboot.\n"
-"\n"
-"\n"
-"Untuk informasi perbaikan rilis Linux Mandrake ini,\n"
-"silakan lihat Errata di:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informasi untuk konfigurasi sistem juga tersedia di \n"
-"bab Instalasi akhir di Buku Petunjuk Resmi Linux Mandrake."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Buat floppy instalasi otomatis"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Bila Anda mau, auto install bisa dilakukan secara otomatis penuh,\n"
-"jadi instalasinya akan mengusai hard drive!\n"
-"(ini dimaksudkan untuk menginstall pada komputer lain)\n"
-"\n"
-"Mungkin Anda perlu mengulangi instalasinya.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Otomatis"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ulang"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Simpan pilihan paket"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalasi Linux Mandrake %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> untuk pindah | <Spasi> untuk pilih | <F12> Layar berikut"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu hilang"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "consolehelper hilang"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Pilih file"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Tambahan"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Dasar"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Tunggulah"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Buka Tree"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Tutup Tree"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Togel tampilan rata dan terurut grupnya"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Pilihan salah, silakan ulangi\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Pilihan Anda? (default %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Entri yang harus Anda penuhi:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Pilihan Anda? (0/1, default %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Tombol `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Anda ingin meng-klik tombol ini? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Pilihan Anda? (default %s%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Banyak yang dapat dipilih dari (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Pilihlah nomor pertama dari 10-range yang ingin Anda edit,\n"
-"atau tekan Enter untuk melanjutkan.\n"
-"Pilihan Anda? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Catatan, label berubah:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Kirim ulang"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Ceko (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Jerman"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spanyol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finland"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Perancis"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norwegia"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polandia"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rusia"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Swedia"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Keyboard UK"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Keyboard US"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albania"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenia (lama)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenia (mesintik)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenia (fonetik)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaijan (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgia"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulagaria (fonetik)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaria (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazil (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusia"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Swis (layout Jerman)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Swis (layout Prancis)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Ceko (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Jerman (tanpa dead key)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Denmark"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegia)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Swedia)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonia"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgia (layout \"Rusia\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgia (layout \"Latin\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Yunani"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hungaria"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroasia"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Ibrani"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Ibrani (fonetik)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iran"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandia"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Itali"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Jepang 106 tombol"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Keyboard Korea"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Amerika Latin"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuania AZERTY (lama)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuania AZERTY (baru)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lithuania \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuania \"phonetic\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvia"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonia"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Belanda"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polandia (layout qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polandia (layout qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugis"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romanian (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romanian (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rusia (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovenia"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakia (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakia (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbia (cyrillic)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Papanketik Muangthai"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Papanketik Tajik"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turki (model \"F\" tradisional)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turki (model \"Q\" modern)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukraina"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Keyboard US (internasional)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnam \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavia (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "kunci Alt Kanan"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Kedua Shift bersamaan"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Kunci Control dan Shift bersamaan"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Kunci CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Kunci Ctrl dan Alt bersamaan"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Kunci Alt dan Shift bersamaan"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Kunci \"Menu\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Kunci \"Mindows\" kiri"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Kunci \"Mindows\" kanan"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Mount melingkar %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Hapus dulu volume logiknya\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "Support PCMCIA tak ada lagi utk kernel 2.2, pakailah kernel 2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Mouse Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse PS2 wheel generik"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 tombol"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Mouse Generik 2 Tombol"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generik"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "wheel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serial"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Mouse Generik 3 Tombol"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Sistem Mouse (serial)"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, old C7 type)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 tombol"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 tombol"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "tiada"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Tidak pakai mouse"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Silakan di test mousenya"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Untuk mengaktifkan mouse,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "gerakan rodanya!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Selesai"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Lanjutkan ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Tahap sebelumnya"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Sudah sesuai?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Hubungan ke Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Cara yang umum untuk terkoneksi ke adsl adalah dengan menggunakan pppoe.\n"
-"Namun ada juga yang menggunakan pptp, dan ada yang pakai dhcp saja.\n"
-"Bila ragu, pilih saja 'gunakan pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "usb speedtouch Alcatel"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "gunakan dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "gunakan pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "gunakan pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Klien dhcp mana yang ingin Anda pakai?\n"
-"defaultnya adalah dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Tidak ada adapter jaringan ethernet yang terdeteksi di sistem ini.\n"
-"Saya jadinya tidak dapat mengkonfigurasikan tipe koneksi ini deh."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Pilih interface jaringan"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Pilih adapter jaringan yang akan digunakan untuk terhubung ke Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Tidak ada card network ya?"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfigureasi jaringan"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Masukkan nama komputernya karena ada server DHCP yang mengharuskan adanya "
-"hostname ini.\n"
-"Hostname (nama komputer) sebaiknya merupakan nama host yg fully-qualified\n"
-"misalnya ``samson.ciawi.mdamt.net''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nama Host"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Wizard Konfigurasi Jaringan"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN external"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "card ISDN Internal"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Tipe koneksi ISDN apa yang Anda miliki?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Konfigurasi ISDN mana yg Anda suka?\n"
-"\n"
-"* Konfigurasi lama menggunakan isdn4net, berisi alat perkasa,\n"
-"  tetapi tricky bagi pemula, dan tidak standar.\n"
-"\n"
-"* Konfigurasi baru lebih mudah dimengerti, lebih standar,\n"
-"  tapi dg alat lebih sedikit.\n"
-"\n"
-"Kami sarankan konfigurasi ringan.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Konfigurasi baru (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Konfigurasi lama (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "konfigurasi ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Pilih provider Anda.\n"
-"Bila tidak ada dalam daftar, pilih Tidak Terdaftar"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protokol Eropa"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protokol Eropa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol lain"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol lain \n"
-" tanpa D-Channel (leased lines)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Protokol apa yang ingin Anda gunakan?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Tipe card mana yang Anda punya?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Saya tak tahu"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Bila Anda punya card ISA, konfigurasi pada layar berikut nanti harusnya "
-"sudah benar.\n"
-"\n"
-"Bila Anda punya card PCMCIA, Anda harus mengetahui irq dan io kartu Anda "
-"itu.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Batal"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Lanjut"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Manakah card ISDN Anda?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Saya mendeteksi adanya sebuah card ISDN PCI, tapi saya tidak tahu tipenya. "
-"Silakan pilih card PCI tersebut pada layar berikutnya."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Tiada kartu PCI ISDN ditemukan. Pilihlah satu pd layar berikut."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Di serial port mana modem Anda terhubung?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Parameter Dialup"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nama koneksi"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Nomor telepon"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Script-based"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal-based"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nama domain"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Server DNS Primary (boleh diisi/tidak)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Server DNS Sekondari (boleh tidak diisi)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Anda bisa putuskan atau konfigurasi koneksi yang ada sekarang."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Anda bisa mengkonfigurasikan ulang koneksi ini"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Sekarang Anda sedang terhubung ke Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Anda bisa sambungkan koneksi ke Internet atau mengkonfigurasikan ulang."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Anda sedang tidak terhubung ke Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Tersambung"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Putus"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Konfigurasikan koneksi"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Koneksi dan konfigurasi Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Kita akan mengkonfigurasi koneksi %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Konfigurasi koneksi %s.\n"
-"\n"
-"\n"
-"Tekan OK utk mulai."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Konfigurasi Jaringan"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Jaringan Anda sudah terkonfigurasi lho\n"
-"Silakan klik OK untuk rekonfigurasi ulang koneksi jaringan/internet ini, "
-"atau batal jika Anda berubah pikiran.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Selamat Datang di Wizard Koneksi Jaringan\n"
-"\n"
-"Sekarang kita akan mengkonfigurasikan internet/jaringan.\n"
-"Bila Anda tidak mau menggunakan deteksi otomatis, mohon untuk tidak memilih "
-"checkbox.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Pilih profil yang hendak Anda konfigurasikan"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Gunakan deteksi otomatis"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Mendeteksi alat..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Konfigurasi koneksi modem biasa "
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "dideteksi pada port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Konfigurasi koneksi ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s telah terdeteksi"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Koneksi ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "telah dideteksi ada pada interface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Konfigurasi jaringan kabel"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Koneksi kabel terdeteksi"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "konfigurasi LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ada ethernet card yang terdeteksi"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Pilih koneksi yg hendak dikonfigurasi"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Anda mengkonfigurasi bbrp jalan utk koneksi Internet.\n"
-"Pilih yg ingin Anda pakai.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Koneksi Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Anda mau jalankan koneksi ini saat boot?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Konfigurasi Jaringan"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Network perlu di-start ulang"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Problem terjadi saat restart netword:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Selamat, jaringan dan internet telah dikonfigurasikan.\n"
-"\n"
-"Konfigurasi akan diterapkan di sistem Anda.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Setelah itu, silakan restart X Anda agar bebas dari masalah pergantian\n"
-"nama host."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Problem konfigurasi.\n"
-"Tes koneksi Anda via net_monitor atau mcc. Jika koneksi tak berjalan, Anda "
-"mungkin perlu jalankan konfigurasi dari awal lagi"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"AWAS: device ini sebelumnya telah dikonfigurasikan untuk terhubung ke "
-"Internet.\n"
-"Tekan OK untuk tetap menggunakan konfigurasi lama.\n"
-"Bila ingin menggantinya, silakan ganti isi pada kolom-kolom di konfigurasi "
-"ini."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Masukkan konfigurasi IP untuk mesin ini.\n"
-"Tiap item harus diberikan sebagai alamat IP dalam notasi decimal\n"
-"bertitik (misalnya 202.159.35.32)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurasi perangkat jaringan %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Alamat IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP otomatis"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Alamat IP harus dalam format 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Masukkan nama komputernya.\n"
-"Hostname (nama komputer) sebaiknya merupakan nama host yg fully-qualified\n"
-"misalnya ``mdamt.fdns.net''.\n"
-"Anda juga bisa masukkan alamat IP gatewaynya kalau ada"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Server DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (mis. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Device Gateway"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Konfigurasi proxy"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Lacak ID kartu network (berguna di laptop)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy biasanya http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy biasanya ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Konfigurasi Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Anda ingin tes koneksi Internet sekarang?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Tes koneksi Anda..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sistem ini sekarang terhubung ke Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Untuk alasan keamanan, sekarang akan diputus koneksinya"
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Sistem ini sepertinya tidak terhubung ke Internet deh.\n"
-"Cobalah konfigurasikan ulang koneksinya."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konfigurasi Koneksi"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Silakan isi atau cek kolom berikut"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ card"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Mem card (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO Card"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 card"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 card"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Nomor telepon Anda"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nama provider (misalnya provider.net.id)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Nomor telepon provider"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS Provider 1 (boleh diisi boleh tidak)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS Provider 2 (boleh diisi boleh tidak)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Pilih negri Anda"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "mode dial"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Laju koneksi"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Timeout koneksi (detik)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Login Account (username)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Katasandi Account"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "gagal melakukan mount: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Partisi extended tak bisa dipakai di platform ini"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Anda punya tabel partisi tapi tidak bisa saya gunakan.\n"
-"Satu-satunya cara adalah memindahkan partisi primary Anda ke partisi\n"
-"extended selanjutnya"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Proses restore dari file %s gagal: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "File backup rusak"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Error pada saat menulis file %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Ada sesuatu yang buruk terjadi pada drive Anda,\n"
-"hal ini saya ketahui saat gagal mengecek integritas data di situ.\n"
-"Artinya, data apapun yang ditulis ke situ akan gagal."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "harus ada"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "penting"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "bagus deh"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bagus"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "hmm.."
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Printer lokal"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "printer remote"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Printer di server CUPS remote"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Printer di server lpd remote"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Printer jaringan (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Printer di server SMB/windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Printer di server NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Masukkan URI device printer"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Pipe job ke perintah"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Model tak dikenal"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Printer Lokal"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Printer Remote"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " di port paralel \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", printer USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", alat multifungsi di port paralel \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", alat multifungsi di USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", alat multifungsi di HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", alat multifungsi"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", cetak ke %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "di server LPD \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", host TCP/IP \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "di server Windows \"%s\", share \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "di server Novell \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", menggunakan perintah %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Printer telanjang (tanpa driver)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(di %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(di mesin ini)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Di server CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Default)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Pilih koneksi Printer"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Bagaimana printer ini disambung ke komputer?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Printer pada server CUPS remote tak perlu dikonfigurasikan di sini; printer "
-"ini akan secara otomatis dideteksi."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "konfigurasi CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Tentukan server CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Untuk mengakses printer di server CUPS remote dari jaringan lokal, Anda tak "
-"perlu mengkonfigurasi apapun; server CUPS otomatis memberi tahu mesin Anda "
-"ttg printer mereka. Semua printer yg dikenal mesin Anda terdaftar di bagian "
-"\"Printer remote\" di window utama Printerdrake. Bila server CUPS Anda ada "
-"di jaringan lain, Anda harus menyodorkan alamat IP dan nomor port server "
-"CUPS utk mendapat info printer dari server. Jika tidak, biarkan kosong."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Biasanya CUPS terkonfigurasi otomatis sesuai jaringan Anda, sehingga Anda "
-"dapat mengakses printer di server CUPS jaringan lokal Anda. Jika tak jalan, "
-"matikan \"Konfigurasi CUPS otomatis\" dan edit /etc/cups/cupsd.conf secara "
-"manual. Jangan lupa restart CUPS selanjutnya (komando: \"service cups restart"
-"\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Alamat IP harus seperti 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Nomor port harus berupa bilangan bulat"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP server CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Konfigurasi CUPS otomatis"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Pendeteksian alat..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Tes port"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Tambah printer baru"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Selamat Datang di Dukun Setup Printer\n"
-"\n"
-"Dukun ini dapat menginstal printer lokal atau remote utk digunakan dari "
-"mesin ini dan juga dari mesin lain di network.\n"
-"\n"
-"Dia akan menanyai semua info yg dibutuhkan utk menset up printer dan memberi "
-"Anda akses ke semua driver printer tersedia, opsi driver, dan tipe koneksi "
-"printer."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Printer Lokal"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Selamat Datang di Dukun Setup Printer\n"
-"\n"
-"Dukun ini membantu Anda menginstal printer terhubung dengan komputer ini.\n"
-"\n"
-"Hubungkan printer Anda ke komputer ini dan nyalakan. Klik \"Lanjut\" jika "
-"siap, atau \"Batal\" bila Anda tak ingin men-set up printer sekarang.\n"
-"\n"
-"Ingat bahwa beberapa komputer bisa crash saat deteksi otomatis printer, "
-"matikan \"Deteksi otomatis printer\" utk instalasi printer tanpa deteksi "
-"otomatis. Pakailah \"Mode Ahli\" printerdrake bila Anda ingin set up "
-"pencetakan di printer remote jika printerdrake tak otomatis menampilkannya."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Printer deteksi otomatis"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Selamat, printer Anda kini terinstal dan terkonfigurasi!\n"
-"\n"
-"Anda dapat mencetak dg perintah \"Cetak\" di aplikasi Anda (biasanya di menu "
-"\"File\").\n"
-"\n"
-"Jika Anda ingin menambah, menghapus atau mengubah nama printer, atau jika "
-"ingin mengubah opsi standar setting (tray kertas, kualitas cetak, ...), "
-"pilih \"Printer\" di bagian \"Perangkat Keras\" Pusat Kontrol Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Deteksi Otomatis Printer"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake dapat mendeteksi otomatis printer paralel dan USB yang "
-"terkoneksi lokal, tapi ingat di beberapa sistem deteksi otomatis DAPAT "
-"MEMBEKUKAN SISTEM ANDA DAN MEMBUAT SISTEM FILE ANDA RUSAK! Jadi kerjakan "
-"ATAS RESIKO ANDA!\n"
-"\n"
-"Anda ingin deteksi otomatis printer?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Lakukan deteksi otomatis"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Setup printer secara manual"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Terdeteksi %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Printer di port paralel \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "printer USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Printer tak ditemukan! Untuk menginstal printer secara manual masukkan nama "
-"alat / file di baris masukan (Port Parallel: /dev/lp0, /dev/lp1, ..., "
-"sebanding dg LPT1:, LPT2:, ..., printer USB pertama: /dev/usb/lp0, printer "
-"USB kedua: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Masukkan nama alat atau file!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Tiada printer lokal ditemukan!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Printer network hanya dapat diinstal setelah instalasi ini. Pilih \"Hardware"
-"\" lalu \"Printer\" di Pusat Kontrol Mandrake."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Untuk menginstal printer network, klik \"Batal\", pindah ke \"Mode Ahli\", "
-"dan klik \"Tambah printer baru\" lagi."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Printer berikut terdeteksi otomatis, jika bukan yang ingin dikonfigurasikan, "
-"masukkan nama alat/file di baris masukan"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Daftar printer terdeteksi otomatis. Pilihlah printer yang ingin diset up "
-"atau masukkan nama alat/file di baris masukan"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Printer berikut terdeteksi otomatis. Konfigurasi printer akan bekerja "
-"otomatis. Jika printer Anda tak terdeteksi dengan benar atau jika ingin Anda "
-"konfigurasi sendiri, jalankan \"Konfigurasi manual\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Daftar printer terdeteksi otomatis. Pilihlah printer yang ingin diset up. "
-"Konfigurasi printer akan bekerja otomatis. Jika printer Anda tak terdeteksi "
-"dengan benar atau jika ingin Anda konfigurasi sendiri, jalankan "
-"\"Konfigurasi manual\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Pilih port tempat printer Anda terhubung atau masukkan nama alat/file di "
-"baris masukan"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Pilihlah port tempat printer Anda terhubung."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Port Paralel: /dev/lp0, /dev/lp1, ..., sebanding dengan LPT1:, LPT2:, ..., "
-"printer USB pertama: /dev/usb/lp0, printer USB kedua: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Pilih/masukkan printer/alat!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Konfigurasi manual"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Apakah printer Anda adalah alat multifungsi dari HP (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 dengan scanner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Instalasi paket HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Sedang mencek alat dan mengkonfigurasi HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Instalasi paket SANE..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Alat multifungsi HP sedang di-scan"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Membuat port printer tersedia utk CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Pembacaan database printer..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Pilihan printer lpd remote"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Untuk memakai printer lpd remote, berikan nama host\n"
-"server printer dan nama printer di server tsb."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Nama host remote"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Nama printer remote"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Nama host remote hilang!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Nama printer remote hilang!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Pilihan printer SMB (windows 95/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Untuk mencetak ke printer SMB, berikan nama host SMB (Catatan! Mungkin "
-"berbeda dengan nama host TCP/IP) dan mungkin alamat IP server printer, nama "
-"share printer yang ingin Anda akses, juga nama user, katasandi, dan info "
-"workgroup."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Host server SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP server SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nama share"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Workgroup"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Harus ada nama/IP server!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Nama share Samba hilang!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Pilihan printer NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Jika ingin mencetak pakai printer NetWare, berikan nama server printer "
-"NetWare (tak selalu sama dengan nama TCP/IPnya) juga nama antrian printer "
-"yang ingin digunakan beserta nama user dan katasandinya."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Server Printer"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nama antrian printer"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Nama server NCP hilang!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Nama antrian NCP hilang!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Opsi Printer TCP/Soket"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Untuk mencetak ke printer soket, berikan nama host printer (dan nomor "
-"portnya). Nomor port server HP JetDirect biasanya 9100, server lain "
-"bervariasi. Lihat manual perangkat keras Anda."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Nama host printer"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Nama host printer hilang!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Device Printer URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Anda dapat menset langsung URI utk akses printer. URI harus memenuhi "
-"spesifikasi CUPS/Foomatic. Ingat, tak semua tipe URI di-support oleh semua "
-"spooler."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Harus diisi URI valid!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Tiap printer perlu nama (misalnya \"printer\"). Kolom Penjelasan / Lokasi "
-"tak harus terisi. Itu komentar utk user."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nama Printer"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Keterangan"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lokasi"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Persiapan database printer ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Model printer Anda"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake telan membandingkan nama model printer terdeteksi dengan daftar "
-"model di database untuk menemukan yang paling cocok. Ini mungkin salah, "
-"khususnya jika printer Anda tak terdaftar di semua database. Periksa apakah "
-"pilihan sudah benar dan klik \"Model sudah benar\", jika salah, klik \"Pilih "
-"model secara manual\" sehingga Anda dapat memilih model printer Anda secara "
-"manual di layar berikut.\n"
-"\n"
-"Printerdrake telah menemukan:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Model sudah benar"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Pilih model secara manual"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Seleksi model printer"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Anda punya model printer mana?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Periksa apakah Printerdrake mendeteksi otomatis model printer Anda dengan "
-"benar. Cari model yang benar di daftar jika kursor menunjukkan model yang "
-"salah atau di \"Printer telanjang\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Jika printer Anda tak terdaftar, pilih yang kompatibel (lihat manual) atau "
-"yang mirip."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Konfigurasi winprinter OKI"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Anda sedang melakukan konfigurasi winprinter laser OKI. Printer ini memakai "
-"protokol komunikasi khusus dan karenanya bekerja hanya saat terhubung port "
-"paralel pertama. Bila printer Anda terhubung dg port lain atau dengan kotak "
-"server cetak hubungkan printer dg port paralel pertama sebelum melakukan tes "
-"cetak. Jika tidak, printer takkan bekerja. Setting tipe koneksi Anda akan "
-"diabaikan oleh driver."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Konfigurasi Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Driver printer inkjet yg disediakan Lexmark hanya men-support printer lokal, "
-"bukan printer di mesin remote atau kotak server cetak. Hubungkan printer "
-"Anda ke port lokal atau konfigurasikan di mesin yang terhubung dengannya."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Agar dapat mencetak dg Lexmark inkjet Anda dan konfigurasi ini, Anda perlu "
-"driver printer inkjet yg disediakan Lexmark (http://www.lexmark.com/). "
-"Masuklah ke situs US dan klik tombol \"Drivers\". Pilih model Anda lalu "
-"sistem operasi \"Linux\". Driver disediakan berupa paket RPM atau shell "
-"script dg instalasi grafis interaktif. Anda tak perlu melakukan konfigurasi "
-"dg frontend grafis. Batalkan langsung setelah persetujuan lisensi.Lalu cetak "
-"halaman printhead alignment dg \"lexmarkmaintain\" dan cocokkan setting head "
-"alignmentdd dg program ini."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Setting standar printer\n"
-"\n"
-"Cek ukuran halaman dan jenis tinta/mode cetak (jika ada) juga konfigurasi "
-"perangkat keras printer laser (memori, unit duplex, tray extra). Ingat, "
-"pencetakan dg kualitas tinggi berjalan amat lambat."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opsi %s harus berupa integer!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opsi %s harus berupa bilangan!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opsi %s keluar batas!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Ingin menset printer ini (\"%s\")\n"
-"sbg printer standar?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Halaman tes"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Pilihlah halaman tes yang ingin Anda cetak.\n"
-"Ingat: halaman tes photo perlu waktu lama untuk dicetak. Di printer laser "
-"bermemori rendah itu bahkan takkan muncul. Umumnya cukup halaman tes standar."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Tiada halaman tes"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Cetak"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Halaman tes standar"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Halaman tes alternatif (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Halaman tes alternatif (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Halaman tes foto"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Jangan cetak halaman tes"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Pencetakan halaman tes..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Halaman test telah dikirim ke printer.\n"
-"Akan butuh waktu sebentar untuk mulai mencetak.\n"
-"Status cetak:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Halaman test telah dikirim ke printer.\n"
-"Akan butuh waktu sebentar untuk mulai mencetak.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Bekerja dg baik?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Printer telanjang"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Utk mencetak file dari baris perintah (window terminal) pakailah komando "
-"komando \"%s <file>\" atau alat cetak grafis: \"xpp <file>\" atau \"kprinter "
-"<file>\". Alat grafis memungkinkan Anda memilih printer dan memodifikasi "
-"setting dengan mudah.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Komando ini dapat Anda pakai dalam kotak \"Perintah cetak\" dialog cetak di "
-"banyak aplikasi, tapi jangan berikan nama file di sini karena file yang "
-"dicetak akan diberikan oleh aplikasi.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Komando \"%s\" juga memungkinkan modifikasi setting job cetak tertentu. "
-"Tambahkan setting yang diinginkan ke baris perintah, mis. \"%s <file>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Untuk mengetahui opsi printer bacalah daftar di bawah atau klik tombol "
-"\"Daftar opsi cetak\".%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Daftar opsi cetak tersedia untuk printer ini:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Utk mencetak file dari baris komando (window terminal) gunakan perintah \"%s "
-"<file>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Perintah ini digunakan di kotak \"Perintah cetak\" di dialog cetak beberapa "
-"aplikasi. Tapi jangan berikan nama file di sini karena file yg dicetak akan "
-"diberikan oleh aplikasi.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr "Untuk mendapat daftar opsi printer klik \"Daftar opsi cetak\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Utk mencetak file dari baris komando (jendela terminal) gunakan komando \"%s "
-"<file>\" atau \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Anda juga dapat memakai antarmuka grafis \"xpdq\" untuk setting opsi dan "
-"kontrol job cetak.\n"
-"Jika KDE Anda pakai sbg lingkungan desktop Anda punya ikon \"tombol panik\", "
-"di desktop, berlabel \"STOP Printer!\", yang menghentikan semua job cetak "
-"seketika bila Anda tekan. Ini berguna contohnya saat kertas macet.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Komando \"%s\" dan \"%s\" juga memungkinkan modifikasi setting opsi job "
-"cetak tertentu. Tambahkan setting yg diinginkan ke baris perintah, misalnya "
-"\"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Tutup"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Cetak/Scan di \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Pencetakan di printer \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Daftar opsi cetak"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Alat multifungsi HP Anda terkonfigurasi otomatis agar dapat men-scan. Kini "
-"Anda dapat men-scan dg \"scanimage\" (\"scanimage -d hp:%s\" utk menentukan "
-"scanner jika Anda punya beberapa) dari baris perintah atau dg antarmuka "
-"grafis \"xscanimage\" atau \"xsane\". Jika Anda memakai GIMP, Anda dapat "
-"juga men-scan dg memilih titik yg sesuai di menu \"File\"/\"Acquire\". "
-"Panggil \"man scanimage\" dan \"man sane-hp\" di baris perintah "
-"untukinformasi lanjut.\n"
-"\n"
-"Jangan pakai \"scannerdrake\" utk alat ini!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Alat multifungsi HP Anda terkonfigurasi otomatis agar dapat men-scan. Kini "
-"Anda dapat men-scan dari baris perintah dg \"ptal-hp %s scan ...\". Scan via "
-"antarmuka grafis atau GIMP saat ini belum di-support. Info lanjutada di \"/"
-"usr/share/doc/hpoj-0.8/ptal-hp-scan.html\". Jika Anda punya HP LaserJet 1100 "
-"atau 1200 Anda hanya dapat men-scan jika opsi scanner terinstal.\n"
-"\n"
-"Jangan pakai \"scannerdrake\" utk alat ini!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Pembacaan data printer..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Transfer konfigurasi printer"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Anda dapat menyalin konfigurasi printer yg Anda buat utk spooler %s ke %s, "
-"spooler Anda sekarang. Semua data konfigurasi (nama printer, keterangan, "
-"lokasi, tipe koneksi, dan setting opsi default) disamakan, tapi job takkan "
-"ditransfer. \n"
-"Tak semua antrian dapat ditransfer karena alasan berikut:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS tak men-support printer server Novell atau printer yg mengirim data ke "
-"perintah format-bebas.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr "PDQ hanya men-support printer lokal, LPD remote, dan Soket/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD and LPRng tak men-support printer IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Antrian tak dibuat oleh program ini atau \"foomatic-configure\" tak dapat "
-"ditransfer."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Juga printer yg terkonfigurasi dengan file PPD dari pabrik atau driver CUPS "
-"asli tak dapat ditransfer."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Tandai printer yg ingin Anda transfer lalu klik\"Transfer\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Jangan transfer printer"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Transfer"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Printer bernama \"%s\" telah ada di %s. \n"
-"Klik \"Transfer\" untuk menindihnya.\n"
-"Anda juga dapat menuliskan nama baru atau melewatkan printer ini."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Nama printer harus hanya berupa huruf, angka, atau garisbawah"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr "Sudah ada printer \"%s\", Anda benar ingin menindih konfigurasinya?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nama printer baru"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Pemindahan %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Anda telah men-transfer printer standar lama Anda (\"%s\"), Akankah ia juga "
-"dijadikan printer default pada sistem cetak baru %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Penyegaran data printer..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Konfigurasi printer remote"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Pemulaian network..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Konfigurasikan jaringan sekarang"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Fungsi network tak dikonfigurasi"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Anda akan melakukan konfigurasi printer remote. Ini memerlukan akses "
-"jaringan aktif, tapi konfigurasi jaringan Anda belum ada. Jika diteruskan "
-"tanpa konfigurasi network, Anda takkan dapat menggunakan printer yang Anda "
-"konfigurasikan sekarang. Bagaimana Anda mau teruskan?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Jalan tanpa konfigurasi jaringan"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Konfigurasi network yang dilakukan saat instalasi kini tak dapat jalan. "
-"Tolong cek apakah network dapat diakses setelah sistem diboot dan betulkan "
-"konfigurasi dengan Pusat Kontrol Mandrake, bagian \"Network & Internet\"/"
-"\"Koneksi\", lalu set printer juga dg Pusat Kontrol Mandrake, bagian "
-"\"Hardware\"/\"Printer\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Akses network tak jalan dan tak dapat dimulai. Cek konfigurasi dan hardware "
-"Anda, lalu coba konfigurasikan printer remote Anda lagi."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Mulai ulang sistem cetak ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "tinggi"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "pengecut"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instalasi sistem cetak dalam level keamanan %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Anda akan menginstal sistem cetak %s di sistem dg level keamanan %s.\n"
-"\n"
-"Sistem cetak ini menjalankan daemon (proses background) yang menunggu dan "
-"memproses job cetak. Daemon ini juga dapat diakses oleh mesin remote via "
-"network jadi ia juga bisa jadi sasaran serangan. Karenanya hanya sedikit "
-"daemon terpilih yg dijalankan dlm level sekuriti ini.\n"
-"\n"
-"Benarkah Anda ingin mengkonfigurasikan printer di mesin ini?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Inisiasi sistem cetak pada saat boot"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Sistem cetak (%s) takkan otomatis jalan saat mesin diboot.\n"
-"\n"
-"Sebabnya mungkin auto-start dimatikan sbg implikasi level sekuriti tinggi, "
-"karena sistem cetak potensial diserang.\n"
-"\n"
-"Anda ingin auto-start sistem cetak dinyalakan lagi?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Pemeriksaan perangkat lunak terinstal"
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Hapus LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Hapus LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Pilih spooler printer"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Sistem (spooler) printer mana yang ingin digunakan?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurasi printer \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Instalasi Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opsi printer"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Persiapan PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Konfigurasi aplikasi..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Ingin konfigurasi printer?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Sistem cetak: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Printer berikut telah dikonfigurasikan. Klik-dobel printer utk memodifikasi "
-"setting; membuatnya printer default; atau melihat info tentangnya; atau "
-"membuat printer di server CUPS remote dapat dipakai oleh Star Office/"
-"OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Printer berikut telah dikonfigurasikan. Klik-dobel printer utk memodifikasi "
-"setting; membuatnya printer default; atau melihat info tentangnya."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Penyegaran daftar printer (utk menampilkan semua printer CUPS remote)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Ubah sistem cetak"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modus Normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Ingin konfigurasikan printer lain?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Modifikasi konfigurasi printer"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Printer %s\n"
-"Apa yg Anda inginkan utk modifikasi printer ini?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Kerjakan!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tipe koneksi printer"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Nama, penjelasan, lokasi printer"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Pembuat, model, driver printer"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Pembuat, model printer"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Set printer ini sebagai standar"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Tambah printer ini ke Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Hapus printer ini dari Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Cetak halaman tes"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Cara penggunaan printer ini"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Hapus printer"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Menghapus printer lama \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Printer standar"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Printer \"%s\" kini diset sbg printer standar."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Penambahan printer ke Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Printer \"%s\" sukses ditambahkan ke Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Gagal menambahkan printer \"%s\" ke Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Hapus printer dari Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "Printer \"%s\" sukses dihapus dari Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Gagal menghapus printer \"%s\" dari Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Anda ingin menghapus printer \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Menghapus printer \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Konfigurasi proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Selamat datang di konfigurator proxy.\n"
-"\n"
-"Anda dapat mengeset proxy http/ftp dengan/tanpa login dan katasandi\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr "Isilah info proxy http, kosongkan jika tak perlu"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url harus berformat 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Bagian port harus berupa angka"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr "Isilah info proxy ftp, kosongkan jika tak perlu"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url harus berformat 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Ketik login proxy dan katasandinya, jika ada.\n"
-"Biarkan kosong jika tak ingin login/passwd"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "katasandi"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "tulis lagi katasandi"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Katasandi tak sama, coba lagi!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Tidak dapat menambah partisi ke RAID md%d yang terformat"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Tidak bisa menulis ke file %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid gagal"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid gagal (mungkin raidtoolsnya tak ada?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Partisi tidak cukup untuk level RAID %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Luncurkan sistem suara ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Skeduler command periodik, Anacron"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd digunakan untuk monitoring status batere dan mencatatnya di syslog.\n"
-"apmd juga bisa untuk mematikan mesin waktu baterenya habis."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Menjalankan perintah terjadwal dengan perintah at pada waktu tertentu\n"
-"saat at dijalankan, dan memulai perintah secara batch waktu rata-rata load\n"
-"sedang rendah."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Cron adalah program UNIX standar yang menjalankan program user\n"
-"pada waktu yang terjadwal. vixie cron memiliki fitur yang lebih lengkap\n"
-"dari cron UNIX biasa, termasuk pembenahan sekuriti yang lebih baik dan\n"
-"lebih mantapnya option pada konfigurasinya."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM memberikan akses ke mouse pada aplikasi Linux yang text based semacam\n"
-"Midnight Commander. Dia juga bisa bikin cut-and-paste dengan mouse pada "
-"konsol\n"
-"dan juga bikin menu pop-up di konsol."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake mendeteksi hardware, dan mengkonfigurasi yg baru/berubah bila "
-"perlu."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache adalah server World Wide Web. Dia dipakai untuk menyediakan file\n"
-"HTML dan CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"daemon superserver internet (biasa dipanggil inetd) bertugas untuk\n"
-"menjalankan servis-servis internet yang dibutuhkan. Dia bertanggung jawab\n"
-"atas banyak server, misalnya telnet, ftp, rsh, dan rlogin. Menonaktifkan\n"
-"inetd berarti menonaktifkan semua servis-servis tadi."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Luncurkan filter paket Linux kernel seri 2.2, untuk set-up\n"
-"firewall yang melindungi mesin Anda dari serangan network."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Paket ini akan meload map keyboard yang dipilih di file\n"
-"/etc/sysconfig/keyboard. Mapnya bisa dipilih dari utility kbdconfig.\n"
-"Mending Anda aktifkan aja deh ini."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Regenerasi otomatis header kernel di /boot utk\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Deteksi dan konfigurasi otomatis hardware saat boot."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf kadang bekerja keras saat boot utk perawatan konfigurasi sistem."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd adalah daemon printer yang jadi tulang punggung lpr. Dia\n"
-"bertugas sebagai server yang memberi perintah kepada printer untuk mencetak."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, digunakan utk membangun server dg performans dan\n"
-"kapasitas tinggi."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) adalah Domain Name Server (DNS) yang digunakan untuk "
-"menerjemahkan nama host ke IP address."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Mount dan unmount semua Network File System (NFS), SMB (Lan\n"
-"Manager/windows), dan NCP (Netware)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktif/nonaktifkan semua interface network yang terkonfigurasi nyala\n"
-"pada saat boot."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS adalah protokol populer untuk file sharing lewat network TCP/IP.\n"
-"Servis ini dinyalakan untuk membuat NFS server bisa jalan dengan "
-"menggunakan\n"
-"konfigurasi pada file /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS adalah protokol populer untuk file sharing di TCP/IP\n"
-"Servis ini memberikan fungsi file lock pada NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr "Secara otomatis nyalakan numlock saat boot pada console/XFree."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Support OKI 4w and winprinter kompatibel."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA digunakan untuk menjalankan perangkat semacam ethernet atau modem "
-"pada laptop.\n"
-"Dia tak bisa jalan kecuali dikonfigurasikan di sini, jadi tak apa-apa\n"
-"kalau tak diinstall di mesin yang tak perlu PCMCIA."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper mengelola koneksi RPC, yang digunakan oleh protokol seperti\n"
-"NFS dan NIS. Server portmap harus jalan di mesin yang bertindak sebagai\n"
-"server untuk protokol yang menggunakan mekanisme RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix adalah Mail Transport Agent, program pengantar surat dari satu ke "
-"lain mesin."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Menyimpan dan mengembalikan pool entropi sistem untuk membuat\n"
-"angka acak dengan kualitas sangat acak."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Tunjuk raw device ke block devices (misalnya partisi hard drive),\n"
-"utk digunakan oleg aplikasi semacam Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Daemon routed digunakan untuk update tabel routing IP otomatis liwat\n"
-"protokol RIP. RIP dipakai di jaringan kecil, dan semakin besar jaringannya\n"
-"maka protokol routing yang canggih pun semakin dibutuhkan."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protokol rstat digunakan pada jaringan untuk mengambil\n"
-"ukuran kinerja sistem di network."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Protokol ruser digunakan di jaringan untuk mengidentifikasi siapa\n"
-"yang lagi login di jaringan."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protokol rwho digunakan untuk melihat daftar user yang sedang login\n"
-"di suatu sistem yang juga menjalankan daemon rwho (mirip dengan finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Aktifkan sistem suara"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog adalah fasilitas yang digunakan para daemon untuk mencatat\n"
-"pesan log sistem di file. Hidupkan aja deh syslognya."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Muat driver piranti USB"
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Aktifkan Server Font X (agar XFree dapat berjalan)"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Pilih service mana yang hendak dijalankan saat boot scr otomatis"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Pencetakan"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Pemakaian file bersama"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistem"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Administrasi remote"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Server Database"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servis: %d diaktifkan utk %d tercatat"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servis"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "sedang jalan"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "dihentikan"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Services dan daemon"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Mohon maaf, informasi lengkap\n"
-"tentang layanan ini tidak tersedia."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Saat boot"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Mulai"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Terima kasih memilih Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Selamat datang di dunia Source Terbuka"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Sukses MandrakeSoft berdasar prinsip Perangkat Lunak Bebas. OS baru Anda "
-"adalah hasil kerja kolaborasi Komunitas Linux seluruh dunia"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Gabung dunia Perangkat Lunak Bebas"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Cari tahu tentang komunitas Sumber Bebas dan jadi anggota. Belajar, ajari, "
-"dan bantulah sesama dengan bergabung dalam banyak forum diskusi di halaman "
-"web \"Komunitas\" kami"
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet dan Pesan"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 menyajikan software terbaik untuk mengakses segala yang "
-"disediakan Internet: Jelajah web & lihat animasi dengan Mozilla dan "
-"Konqueror, tukar email & atur info pribadi Anda dengan Evolution dan Kmail, "
-"dan banyak lagi"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia dan Grafik"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 memaksimalkan komputer multimedia Anda! Gunakan software "
-"mutakhir untuk memainkan file music dan audio, edit dan mengatur gambar dan "
-"foto, melihat TV dan video, dan banyak lagi"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Development"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 adalah platform development terampuh. Temukan power "
-"compiler gcc GNU, juga lingkungan development Sumber Bebas terbaik"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Pusat Kontrol Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Pusat Kontrol Mandrake Linux 8.2 adalah tempat terpadu untuk mengkonfigurasi "
-"sistem Mandrake Anda"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Antarmuka user"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 menyediakan 11 lingkungan desktop grafis dan manajer "
-"window termasuk GNOME 1.4, KDE 2.2.2, Window Maker 0.8, dan lain-lain"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Piranti Lunak Server"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Jadikan mesin Anda server powerful dengan hanya beberapa klik mouse: server "
-"Web, email, firewall, router, server file dan cetak, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Game"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 menyediakan game terbaik Source Terbuka - arcade, aksi, "
-"kartu, olah raga, strategi, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "KampusMandrake"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Inginkah Anda belajar Linux secara mudah, cepat dan gratis? MandrakeSoft "
-"menyediakan training Linux gratis, beserta cara mentes kemajuan Anda, di "
-"KampusMandrake -- pusat training online kami"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "AhliMandrake"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Support kualitas dari Komunitas Linux, dan dari MandrakeSoft, ada di sekitar "
-"pojok. Jika Anda veteran Linux, jadilah \"Ahli\" dan bagilah pengetahuan "
-"Anda di situs web support kami"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "KonsultasiMandrake"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Untuk semua proyek IT, konsultan kami siap menganalisa kebutuhan Anda dan "
-"menyediakan solusi pilihan. Hasil pengalaman total MandrakeSoft sebagai "
-"produser Linux menyediakan Teknologi Informasi sesungguhnya untuk organisasi "
-"bisnis Anda"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "TokoMandrake"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Solusi Linux lengkap, termasuk sajian khusus produk dan 'goodies', tersedia "
-"online di e-store kami"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Untuk info lebih lanjut tentang Servis Profesional MandrakeSoft dan sajian "
-"komersial, lihat halaman web berikut:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instalasi paket..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Saya tak bisa baca tabel partisi, udah hancur lebur nih :(\n"
-"Aku akan coba hapus partisi yg jeleknya"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Ada Kesalahan"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "File image `%s' tak ditemukan."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Konfigurasi Instalasi Otomatis"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Konfigurasi disket Instalasi Otomatis akan dilakukan. Fitur ini agak "
-"berbahaya dan harus hati-hati digunakan.\n"
-"\n"
-"Dg fitur ini, Anda akan dapat mengulang instalasi yang Anda terapkan pada "
-"komputer ini, sementara pada beberapa tahapan akan ada pertanyaan interaktif "
-"untuk mengubah nilainya.\n"
-"\n"
-"Utk keamanan maximum, proses partisi dan format takkan pernah dijalankan\n"
-"secara otomatis, apapun yg Anda pilih selama instalasi komputer ini.\n"
-"\n"
-"Jalan terus?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Konfigurasi Step Otomatis"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Pada tiap tahapan pilih apakah instalasi akan diulang, atau akan manual"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Selamat Datang.\n"
-"\n"
-"Parameter instalasi otomatis tersedia di bagian sebelah kiri"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Selamat!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr "Floppy sukses dibuat. Instalasi bisa direplikasi."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Instalasi Otomatis"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Tambah item"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Hapus item terakhir"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      Laporan DrakBackup \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      Laporan Daemon DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    Detil Laporan DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "total kemajuan"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Backup file sistem..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "File Backup Hard Disk..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Backup file User..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Kemajuan Backup Hard Disk..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Backup file lain..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"daftar file dikirim oleh FTP : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) problem koneksi FTP: Gagal mengirim file backup dengan FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Kesalahan saat pengiriman surat. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Pilihan File"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Pilih file atau direktori dan klik 'Tambah'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Periksa semua opsi yang Anda inginkan.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Opsi ini memungkinkan backup / simpan ulang semua file di direktori /etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Backup file System Anda. ( direktori /etc )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Pakai backup incremental (tidak menghapus backup lama)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Tidak memasukkan file penting (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr "Dengan opsi ini Anda dapat menyimpan ulang semua versi direktori /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Periksa semua user yang ingin Anda masukkan ke backup."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Jangan masukkan cache browser"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Pakai Backup Incremental (tidak menghapus backup lama)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Hapus Pilihan"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "User"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Pakai koneksi FTP utk backup"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Masukkan nama host atau IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Masukkan direktori utk\n"
-" meletakkan backup di host ini."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Masukkan login"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Masukkan katasandi"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Ingat katasandi ini"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "Koneksi FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Koneksi Aman"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Pakai CD/DVDROM utk backup"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Pilih ruang CD Anda"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Periksa apakah Anda menggunakan media CDRW"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Cek apakah Anda ingin menghapus CDRW sebelum"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Cek jika Anda ingin memasukkan\n"
-" boot instalasi di CD Anda."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Masukkan nama alat Penulis CD Anda\n"
-" mis: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Gunakan pita utk backup"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Masukkan nama alat utk backup"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Masukkan ukuran maximum\n"
-" yg diizinkan utk Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Masukkan direktori utk penyimpanan:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Pakai quota utk file backup."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Jaringan"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "perjam"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "harian"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "mingguan"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "bulanan"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Pakai daemon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Pilih interval waktu backup"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Pilih media backup."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Pakai Hard Drive dg daemon"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Pakai FTP dg daemon"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Pastikan daemon cron masuk dalam daftar servis."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Kirim laporan mail setelah tiap backup ke :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Apa"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Mana"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Kapan"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Opsi Tambahan"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Konfigurasi Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Pilih tempat backup"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "di Hard Drive"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "lewat Network"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Pilih apa yang akan di-backup"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Backup sistem"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Backup User"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Pilih user secara manual"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Sumber Backup: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- File Sistem:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- File User:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- File Lain:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Simpan di Hard drive di path : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Simpan di FTP di host : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t name user: %s\n"
-"\t\t di path: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Opsi:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tJangan masukkan File Sistem\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackup dengan tar dan bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackup dengan tar dan gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Cakupan daemon (%s) :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Hard drive.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Network dg FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Network dg SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Tiada konfigurasi, mohon klik Dukun atau Lanjutan.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Daftar data simpan ulang:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Daftar data rusak:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Mohon uncheck atau hapus nanti."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "File backup rusak"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Semua data terpilih telah                     "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          Berhasil Disimpan Ulang di %s    "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Simpan Ulang Konfigurasi    "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK utk simpan ulang file lain."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Daftar user simpan ulang (hanya tanggal terakhir per user yg penting)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Backup file sistem sebelum:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "pilih tanggal simpan ulang"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Pakai Hard Disk utk backup"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Simpan ulang dari Hard Disk."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Masukkan direktori tempat backup disimpan"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Pilih media lain utk disimpan ulang"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Media Lain"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Simpan ulang sistem"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Simpan ulang User"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Simpan ulang Lain-lain"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "pilih path utk simpan ulang (selain / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Lakukan backup baru sebelum simpan ulang (hanya utk backup incremental.)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Hapus direktori user sebelum simpan ulang."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Simpan ulang semua backup"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Simpan ulang pilihan sendiri"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Pertolongan"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Sebelumnya"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Simpan"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Bangun Backup"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Simpan ulang"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Lanjut"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Buatlah backup sebelum menyimpan ulang...\n"
-" atau pastikan path utk menyimpan sudah benar."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Error saat sendmail\n"
-"  surat laporan Anda tak terkirim\n"
-"  Mohon konfigurasikan sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Daftar Paket yang akan diinstal"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Error saat pengiriman file via FTP.\n"
-" Betulkan konfigurasi FTP Anda."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Pilih data utk disimpan ulang..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Pilih media backup..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Pilih data backup..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Tiada file konfigurasi \n"
-"Mohon klik Dukun atau Lanjutan"
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Sedang dibangun ... tunggu."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Backup file sistem"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Backup file user"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Backup file lain"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Total Kemajuan"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "file dikirim dg FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Kirim file..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Daftar data utk dimasukkan ke CDROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Masukkan kecepatan penulis cd"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Masukkan nama alat Penulis CD (mis: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Cek jika Anda ingin memasukkan boot instalasi ke CD"
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Backup Sekarang dari file konfigurasi"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Lihat Konfigurasi Backup."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Konfigurasi Dukun"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Konfigurasi Lanjutan"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Backup Sekarang"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"penjelasan opsi:\n"
-"\n"
-" Di tahap ini Drakbackup mengizinkan Anda mengubah:\n"
-"\n"
-" - Mode kompresi:\n"
-"    \n"
-"      Jika Anda pilih kompresi bzip2, Anda akan mengkompres\n"
-"      data lebih baik daripada gzip (sekitar 2-10 %).\n"
-"      Opsi ini bukan standar karena\n"
-"      banyak makan waktu (sekitar 1000% lebih).\n"
-" \n"
-" - Mode update:\n"
-"\n"
-"      Opsi ini akan mengupdate backup Anda, tapi tak\n"
-"      benar-benar berguna karena Anda perlu\n"
-"      mengurai backup Anda sebelum dapat meng-update.\n"
-"      \n"
-" - mode .backupignore:\n"
-"\n"
-"      Seperti cvs, Drakbackup akan mengabaikan semua referensi\n"
-"      tertulis dalam file .backupignore di tiap direktori.\n"
-"      mis: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Beberapa error saat sendmail disebabkan oleh \n"
-" konfigurasi buruk postfix. Utk mengatasinya \n"
-" myhostname atau mydomain di /etc/postfix/main.cf harus diset\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"penjelasan opsi:\n"
-"\n"
-" - Backup file sistem:\n"
-"       \n"
-"\tOpsi ini dapat mem-backup direktori /etc, yg berisi\n"
-"\tsemua file konfigurasi. Hati-hati saat tahap restore\n"
-"\t(simpan ulang) agar tak menindih:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup file User: \n"
-"\n"
-"\tDengan opsi ini Anda dapat memilih user yg ingin \n"
-"\tAnda backup.\n"
-"\tUntuk menghemat ruang disk, cache browser web harap \n"
-"\ttak dimasukkan.\n"
-"\n"
-" - Backup file Lain: \n"
-"\n"
-"\tOpsi ini memungkinkan Anda menambah data utk disimpan.\n"
-"\tDengan backup lain-lain Anda sementara tak dapat \n"
-"\tmemilih backup incremental.\t\t\n"
-" \n"
-" - Backup Incremental:\n"
-"\n"
-"\tIni adalah opsi terkuat backup. Anda dapat mem-backup \n"
-"\tsemua data pertama kali, setelah itu hanya yang berubah.\n"
-"\tKemudian Anda akan dapat, saat tahap restore, menyimpan\n"
-"\tulang data dari tanggal yg ditentukan date.\n"
-"\tJika Anda belum memilih opsi ini semua backup lama akan \n"
-"\tdihapus sebelum tiap backup.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"penjelasan restore:\n"
-" \n"
-"Hanya tanggal terkini yang akan dipakai, karena dg backup incremental \n"
-"diperlukan restore satu demi satu tiap backup lama.\n"
-"\n"
-"Jadi jika Anda tak suka simpan ulang user lepaslah pilihan semua kotak\n"
-"tandanya.\n"
-"\n"
-"Jika tidak, Anda dapat memilih hanya satu opsi\n"
-"\n"
-" - Backup Incremental:\n"
-"\n"
-"\tBackup incremental adalah opsi terkuat backup,\n"
-"\tAnda dapat mem-backup semua data pertama kali,\n"
-"\tdan kemudian hanya yg berubah.\n"
-"\tJadi Anda dapat, saat tahap restore, menyimpan\n"
-"\tulang data Anda dari tanggal yg ditentukan.\n"
-"\tJika Anda belum memilih opsi ini semua backup\n"
-"\tlama akan dihapus sebelum tiap backup.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Haksalin (C) 2001 MandrakeSoft oleh DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Program ini gratis; Anda dapat menyebar ulang dan/atau mengubah\n"
-" menurut Lisensi Publik Umum GNU dari the Free Software Foundation; baik\n"
-" versi 2, atau yang lebih baru.\n"
-"\n"
-" Program ini disebar agar dapat berguna, tapi TANPA GARANSI APAPUN; bahkan\n"
-" tanpa garansi sebagai implikasi DAGANG atau KELAYAKAN UNTUK KEGUNAAN\n"
-" TERTENTU. Info lebih lanjut ada di Lisensi Publik Umum GNU.\n"
-"\n"
-" Anda mestinya sudah menerima salinan Lisensi Publik Umum GNU dari program\n"
-" ini; jika tidak, tulis ke the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Penjelasan:\n"
-"\n"
-"  Drakbackup digunakan untuk membackup system Anda.\n"
-"  Selama konfigurasi Anda dapat memilih: \n"
-"\t- File System, \n"
-"\t- File User, \n"
-"\t- File Lain-lain.\n"
-"\tatau Seluruh sistem ...  dan Lain-lain (mis. partisi Windows)\n"
-"\n"
-"  Drakbackup dapat melakukan backup system di:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (dg autoboot, rescue dan autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup dapat menyimpan ulang (restore) sistem Anda ke\n"
-"  direktori pilihan user.\n"
-"\n"
-"  Per default semua backup ditempatkan di direktori\n"
-"  /var/lib/drakbackup\n"
-"\n"
-"  File konfigurasi:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Tahap Restore:\n"
-"  \n"
-"  Saat tahap restore, DrakBackup akan menghapus \n"
-"  direktori asli Anda dan mencek bahwa semua file \n"
-"  backup tak rusak. Disarankan Anda melakukan \n"
-"  backup sebelum menyimpan ulang.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"penjelasan opsi:\n"
-"\n"
-"Hati-hati menggunakan backup ftp, karena hanya backup yg telah \n"
-"dibangun yg akan dikirim ke server. Jadi sementara Anda perlu \n"
-"membangun backup di harddrive Anda sebelum mengirimnya ke server.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problem Restore Backup:\n"
-"\n"
-"Saat tahap restore, Drakbackup akan mencek semua file\n"
-"backup sebelum menempatkannya kembali. Sebelum restore,\n"
-"Drakbackup akan menghapus direktori asli Anda, dan Anda\n"
-"akan kehilangan semua data. Hati-hati dan jangan mengubah\n"
-"file data backup secara manual.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Penjelasan:\n"
-"\n"
-"  Drakbackup digunakan utk mem-backup sistem Anda.\n"
-"  Saat konfigurasi Anda dapat memilih \n"
-"\t- File Sistem, \n"
-"\t- File User, \n"
-"\t- File Lain-lain.\n"
-"\tatau Seluruh sistem ...  dan Lain-lain (mis. partisi Windows)\n"
-"\n"
-"  Drakbackup dapat mem-backup sistem di:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (dg autoboot, rescue dan autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup dapat menyimpan ulang sistem Anda ke\n"
-"  direktori pilihan user.\n"
-"\n"
-"  Per default semua backup akan ditempatkan di\n"
-"  direktori /var/lib/drakbackup\n"
-"\n"
-"  File konfigurasi:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Tahapan Restore:\n"
-"  \n"
-"  Saat tahap restore, Drakbackup akan menghapus\n"
-"  directory asli dan mencek bahwa semua file backup\n"
-"  tak rusak. Disarankan Anda melakukan backup\n"
-"  terakhir sebelum menyimpan ulang.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalasi %s gagal. Ada kesalahan berikut:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Cari font terinstal"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Lepas pilih font terinstal"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "baca semua font"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "tiada font ditemukan"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "selesai"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "tak ditemukan font di partisi termount"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Pilih ulang font yg benar"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "gagal temukan font.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Cari font di daftar instalasi"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Copy font"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Instalasi font True Tupe"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "tunggu saat ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Instalasi True Type selesai"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konversi font"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "bangun type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "referensi Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "konversi font ttf"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "konversi font pfm"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Sembunyikan file temporer"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Jalankan ulang XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Sembunyikan File Font"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "jalankan ulang xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Sebelum menginstl font, Anda harus punya hak memakai dan menginstalnya di "
-"sistem Anda.\n"
-"\n"
-"-Anda dapat menginstal font dengan cara normal. Terkadang, font palsu dapat "
-"membuat server X Anda hang."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Impor Font"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Ambil Font Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Buang Font"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Opsi Lanjutan"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Daftaf Font"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Pilih aplikasi yang mensupport font :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Printer Generik"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Pilih file font atau direktori dan klik 'Tambah'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Daftar Instalasi"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "klik di sini jika Anda yakin."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "di sini jika tidak."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Semua tak dipilih"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Semua Dipilih"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Hapus Daftar"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Tes Awal"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Salin font di sistem Anda"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Instal & konversikan Font"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Instalasi Akhir"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Hapus font di sistem Anda"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Un-Instalasi Akhir"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Pemakaian Bersama Koneksi Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Pemakaian Bersama Koneksi Internet telah aktif"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfigurasi Internet Connection Sharing telah seleasi.\n"
-"Namun sekarang sudah aktif.\n"
-"\n"
-"Apa yang ingin Anda lakukan?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "matikan"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "tutup"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "konfigurasi ulang"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Server-server sedang dimatikan"
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Internet Connection Sharing telah dimatikan"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internet Connection Sharing masih dimatikan"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfigurasi Internet Connection Sharing telah seleasi.\n"
-"Namun sekarang masih dimatikan.\n"
-"\n"
-"Apa yang ingin Anda lakukan?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "aktifkan"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Server-server akan dinyalakan"
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Internet Connection Sharing sudah aktif"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Komputer ini bisa dikonfigurasikan agar bisa membagi koneksi Internetnya.\n"
-"Dengan cara ini, komputer lain di jaringan lokal bisa menggunakn koneksi\n"
-"Internet milik komputer ini.\n"
-"\n"
-"Perhatikan: Anda mesti punya adapter jaringan untuk mensetup Local Area "
-"Network (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (pakai module %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Antarmuka %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Tidak ada adaptor jaringan di sistem ini!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Tiada adapter jaringan ethernet terdeteksi. Jalankan konfigurator hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Antarmuka jaringan"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Hanya ada satu adapter jaringan yang dikonfigurasikan di sistem ini:\n"
-"\n"
-"%s\n"
-"\n"
-"Apakah Anda mau melakukan setup Local Area Network untuk adapter itu?"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Silakan pilih adapter jaringan yang hendak disambung ke Local Area Network "
-"Anda."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Antarmuka network telah dikonfigurasi"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Awas, adaptor network (%s) telah terkonfigurasikan.\n"
-"\n"
-"Anda ingin konfigurasi ulang otomatis?\n"
-"\n"
-"Anda dapat melakukannya secara manual tapi Anda perlu tahu yg Anda kerjakan."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Konfigurasi ulang otomatis"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Tampilkan konfigurasi antarmuka"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Konfigurasi `%s':\n"
-"\n"
-"Network: %s\n"
-"Alamat IP: %s\n"
-"Atribut IP: %s\n"
-"Driver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Konfigurasi Anda dapat dipakai dengan anggapan Anda telah menset up server "
-"DHCP; tolong periksa apakah Network Kelas-C jaringan lokal Anda terbaca "
-"dengan benar; Konfigurasi ulang takkan dilakukan dan konfigurasi server DHCP "
-"takkan disentuh.\n"
-"\n"
-"Atau, antarmuka dan server DHCP dapat dikonfigurasikan (lagi).\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Jaringan Lokal Kelas-C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP Server DHCP (Ini)"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Konfigurasi ulang antarmuka dan server DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Jaringan Lokal tak berakhiran `.0', keluar."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Ada potensi konflik alamat LAN pada konfigurasi %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Konfigurasi firewall terdeteksi!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Awas! Ada konfigurasi firewall yang sudah ada nih. Anda nanti perlu mengecek "
-"dan membetulkan dengan cara manual setelah instalasi."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigurasi..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Mengkonfigurasikan skrip, menginstall software, menjalankan server..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problem instalasi paket %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Semuanya sudah dikonfigurasikan.\n"
-"Anda sekarang bisa membagi koneksi Internet dengan komputer-komputer lain "
-"pada Local Area Network di tempat Anda, dengan menggunakan konfigurasi "
-"jaringan otomatis (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Konfigurasi telah seleasi.Namun sekarang masih dimatikan."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Konfigurasi telah selesai.Namun sekarang sudah aktif."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internet Connection Sharing belum pernah dikonfigurasikan"
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Koneksi dan konfigurasi sharing Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Selamat datang di utiliti Internet Connection Sharing!\n"
-"\n"
-"%s\n"
-"\n"
-"Silakan pencet Konfigurasikan untuk mulai."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Konfigurasi Jaringan (adapter %d)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Hapus profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil yang hendak dihapus:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Buat profil baru..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Nama profil yg akan dibuat (profil baru dibuat sbg salinan yg sekarang) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nama Host: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Akses Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipe: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interface: "
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status: "
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Tunggu"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfigurasi Akses Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "konfigurasi LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfigurasi Local Area Network..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Klik di sini utk meluncurkan wizard ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Wizard..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Pasang"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Tunggu ya, sedang mengaktifkan konfigurasi"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Tersambung"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Tak tersambung"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Sambungkan..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Koneksi diputus"
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr "Awas, koneksi Internet lain terdeteksi, mungkin memakai jaringan Anda"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Tiada interface terkonfigurasi.\n"
-"Konfigurasi dulu dg meng-klik 'Configure'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "konfigurasi LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protokol Boot"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Dijalankan saat boot"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Klien DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktifkan sekarang"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "non-aktifkan sekarang"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Antarmuka ini belum dikonfigurasikan.\n"
-"Luncurkan dukun konfigurasi di window utama"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Tiada koneksi internet.\n"
-"Buat dulu dg meng-klik 'Configure'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "konfigurasi koneksi Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "konfigurasi koneksi Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipe koneksi"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameter"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Card Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Klien DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Pilih tingkat keamanan"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Pusat Kontrol"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Pilih tool yang hendak digunakan"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "AS (siaran)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "AS (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "AS (kabel-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Cina (siaran)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Jepang (siaran)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Jepang (kabel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Eropa Timur"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlandia"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Eropa Barat"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Selandia Baru"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Afrika Selatan"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Tolong,\n"
-"tuliskan standar dan daerah tv Anda"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "standar TV :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Area :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Kanal TV sedang di-scan ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Men-scan kanal TV"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "cara pakai: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Pilih keyboard Anda"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Ingin membuat tombol BackSpace menjadi Delete dalam konsol?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Ganti Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Masukkan CDROM Instalasi di drive Anda dan tekan OK\n"
-"Jika tak punya, tekan Batal untuk hindari upgrade live."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Gagal memulai upgrade live !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Perubahan telah dilakukan, Anda harus logout agar perubahan berlaku"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Tampilkan hari terpilih saja"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/File/B_aru"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/File/_Buka"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/File/_Simpan"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/File/Simpan _Dengan nama lain"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/File/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Pilihan"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Pilihan/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Help"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Help/_About..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "User"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Pesan"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Penjelasan Piranti Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "cari"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Penampil log Anda"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Setting"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "pencocokan"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "tapi bukan pencocokan"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Pilih file"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalender"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Isi file"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Peringatan Mail/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "tunggu, sedang menelaah file: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Konfigurasi peringatan Mail/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Selamat datang di konfigurator mail/SMS.\n"
-"\n"
-"Anda dapat mengeset sistem peringatan.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "setting servis"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Anda akan menerima peringatan bila salah satu servis terpilih terhenti"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "setting muatan"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Anda akan diperingatkan jika muatan lebih tinggi daripada nilai ini"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "konfigurasi peringatan"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Konfigurasikan cara sistem memperingatkan Anda"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Simpan di..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Tipe mouse yang anda punya?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "tiada serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulasikan tombol ketiga?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s ditemukan di %s, konfigurasikan?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Pilih scanner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Scanner %s ini tak disupport"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Device boot"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Scanner %s ini harus dikonfigurasikan oleh printerdrake.\n"
-"Anda dapat meluncurkan printerdrake dari Pusat Kontrol Mandrake bagian "
-"Hardware."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "konfigurasi firewall"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "konfigurasi firewall"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Anda sudah ada firewall.\n"
-"Silakan tekan Konfigurasikan untuk mengganti atau menghapus firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Silakan tekan Konfigurasikan untuk mensetup firewall standar"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Pilih bahasa Anda"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Pilih kelas instalasi"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Deteksi hard disk"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfigurasi mouse"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Pilih keyboard"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Keamanan"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Setup filesystem"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Melakukan format partisi"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Paket yang akan diinstal"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instal sistem"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Tambahkan user"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfigurasi jaringan"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigurasi service"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Install bootloader"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Membuat bootdisk"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigurasi X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Instal update sistem"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Keluar dari proses instal"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"konfigurator tinyfirewall\n"
-"\n"
-"Program ini mengkonfigurasi firewall pribadi sistem Linux Mandrake.\n"
-"Untuk membuat solusi firewall yang lebih baik, cobalah\n"
-"distribusi Mandrake Security Firewall"
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Sekarang saya akan tanyakan layanan mana saja yang hendak Anda bolehkan\n"
-"untuk dapat diakses dari Internet. Silakan fikirkan dulu masak-masak akan\n"
-"hal ini, karena keamanan komputer Anda sangat penting kan.\n"
-"\n"
-"Ayo, bila Anda tidak pakai layanan-layanan ini, matikan saja lewat "
-"firewall.\n"
-"Anda bisa ubah konfigurasikan lagi kapan-kapan dengan menjalankan\n"
-"aplikasi ini lagi nantinya."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Apakah Anda ingin webserver Anda juga dapat diakses dari Internet ??\n"
-"Bila Anda ingin webserver Anda HANYA ingin diakses dari KOMPUTER INI SAJA\n"
-"maka jawab saja TIDAK di sini\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Apakah Anda menjalankan Name server di komputer ini? Bila Anda\n"
-"tidak menjalankan nameserver untuk menjawab informasi IP dan zone untuk "
-"Internet\n"
-"silakan jawab TIDAK.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Apakah Anda ingin membuka koneksi Secure Shell (ssh) ?\n"
-"SSH adalah pengganti telnet yang mungkin hendak Anda gunakan.\n"
-"Bila Anda hanya menggunakan telnet sekarang, silakan ganti ke ssh.\n"
-"telnet tidak dienkripsi loh -- jadi orang lain bisa mencuri katasandi Anda\n"
-"saat telnet. SSH dienkripsi dan tidak bisa disadap."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Apakah Anda ingin membuka koneksi telnet?\n"
-"Tapi ini sangatlah tidak aman sebagaimana dijelaskan pada layar sebelumnya.\n"
-"Ayo deh jawab TIDAK dan gunakan SSH saja.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Apakah Anda hendak membuka koneksi FTP yang ingin diakses dari Internet?\n"
-"Bila ya, silakan gunakan saja untuk transfer anonimous. Katasandi yang "
-"dikirimkan\n"
-"oleh FTP bisa dicuri oleh cracker, karena FTP tidak diacak saat pertukaran "
-"katasandi terjadi.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Apakah Anda menjalankan server mail ? Bila Anda mengirimkan email\n"
-"dengan menggunakan pine, mutt, atau klien mail teks, maka sebaiknya iya.\n"
-"Selainnya, matikan saja deh.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Apakah Anda menjalankan server POP atau IMAP ?\n"
-"Fasilitas ini bisa digunakan untuk menampung account email non web untuk\n"
-"umum.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Wah, Anda pakai kernel 2.2 yah... Bila IP jaringan Anda diset sendiri\n"
-"oleh komputer di kantor atau rumah (secara dinamis)\n"
-"maka kita harus jawab YA di sini. Benar tak demikian?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Apakah komputer Anda mendapatkan informasi jam dari komputer lain?\n"
-"Biasanya, fasilitas ini digunakan oleh organisasi sedang/besar Unix/Linux\n"
-"untuk sinkronisasi waktu untuk logging dan sebagainya. Bila Anda\n"
-"tidak tergabung dari kantor yang besar atau belum pernah dengar ini "
-"sebelumnya.\n"
-"jawab TIDAK deh"
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurasi tamat. Simpan perubahan ini ke disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Tidak bisa buka %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "error membuka file %s untuk ditulisi: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Tidak, tak perlu DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Ya, perlu DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Tidak, tak perlu NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Ya, perlu NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Jangan Simpan"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Simpan & Keluar"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Dukun Konfigurasi Firewall"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Tidak (lindungi dari internet)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Ya (izinkan ini melewati firewall)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Tunggu, paket terinstal sedang diverifikasi"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Gagal menginstal paket kebutuhan : %s dan Bastille.\n"
-" Coba instal secara manual."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Server, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Komputer Jaringan (klien)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "server NFS, SMB, Proxy, SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Aplikasi Perkantoran"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Workstation Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Tool untuk Palm Pilot ataupun Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Workstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Server, Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Nama Domain dan Server Info Network (NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Program office: pengolah kata (kword, abiword), spreadsheet (kspread, "
-"gnumeric), viewer pdf,dsb"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Tool untuk audio: player mp3 atau midi, mixer, dsb"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Buku dan Howto untuk Linux dan Free Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Workstation KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, dsb"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Kumpulan tool untuk mail, news, web, transfer file, dan chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Server, Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Server database PostgreSQL atau MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Tools untuk memudahkan konfigurasi komputer."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Sound"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Peralatan"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentasi"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Alat konsol"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Server mail Postfix, server news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Komputer Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Komputer Multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "konfigurasi"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Desktop Grafis tambahan (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment, lingkungan grafis dasar dg kumpulan tool-tool "
-"yang menyertainya"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Mode Grafis"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache dan Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Tool untuk membuat dan memburn CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Komputer Kantor"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, dsb"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Program Grafis, misalnya The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Librari, program, dan file include untuk pemrograman C dan C++"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Komputer Server Jaringan"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Komputer Game"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Editor dan Player Video"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafis"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Program permainan: arcade, board, strategi, dsb"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Kumpulan tool untuk membaca dan mengirimkan email dan news (pine, mutt, "
-"tin..) dan untuk membrowse Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arsip, emulator, pemantauan"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Keuangan Pribadi"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Environment grafis dengan kumpulan aplikasi dan tool desktop yang mudah "
-"digunakan"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klien untuk berbagai protokol, termasuk ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Gerbang Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Program untuk memainkan/mengedit suara dan video"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Desktop Grafis lainnya"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editor, shell, tool untuk file, terminal"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Program untuk mengelola keuangan, misalnya gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Pengelolaan Informasi Pribadi"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD Burning"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Aplikasi Ilmu pengetahuan"
-
-#~ msgid "About"
-#~ msgstr "Keterangan"
-
-#~ msgid "             Help           "
-#~ msgstr "             Pertolongan    "
-
-#~ msgid ""
-#~ "XawTV isn't installed ...\n"
-#~ "You should install it.\n"
-#~ " Just type \"urpmi xawtv\""
-#~ msgstr ""
-#~ "XawTV belum diinstal,\n"
-#~ "Anda harus menginstalnya.\n"
-#~ " Ketikkan \"urpmi xawtv\""
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Tak dapat mengakses modul kernel yg sesuai dg kernel Anda (file %s hilang)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Tiada"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Pilih satu printer standar!"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Terapkan/Baca-ulang printer"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Sekarang Anda boleh berikan parameter untuk module %s."
-
-#~ msgid "Low"
-#~ msgstr "Lemah"
-
-#~ msgid "Medium"
-#~ msgstr "Sedang"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Ada beberapa peningkatan level security, yang utama adalah ada lebih "
-#~ "banyak\n"
-#~ "peringatan dan cek sekuriti yang lebih ketat."
-
-#~ msgid "mount failed"
-#~ msgstr "gagal melakukan mount"
-
-#~ msgid "Boot mode"
-#~ msgstr "Mode boot"
-
-#~ msgid "Export"
-#~ msgstr "Ekspor"
-
-#~ msgid "click here"
-#~ msgstr "klik di sini"
-
-#~ msgid ""
-#~ "To know about the options available for the current printer read either "
-#~ "the list shown below or click on the \"Print option list\" button. %s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Untuk mengetahui opsi yg tersedia untuk printer ini bacalah daftar "
-#~ "berikut atau klik tombol \"Daftar opsi cetak\". %s\n"
-#~ "\n"
-
-#~ msgid ""
-#~ "This %s scanner uses parallel port, which is unsupported for the moment"
-#~ msgstr "Scanner %s memakai port paralel, yg tak disupport saat ini"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux mengatur jam dengan GMT atawa \"Greenwich Mean Time\" dan \n"
-#~ "menterjemahkannya ke waktu lokal sesuai dengan timezone yang Anda pilih."
-
-#~ msgid ""
-#~ "You may choose to upload updated packages that have been released after "
-#~ "the\n"
-#~ "distribution has been made available. You will get security fixes or bug\n"
-#~ "fixes, but you need to have an Internet connection configured to "
-#~ "proceed.\n"
-#~ "Answer \"Yes\" to the dialog to choose an available mirror. After "
-#~ "choosing\n"
-#~ "a mirror, a packages selection tree appears to allow you to choose "
-#~ "packages\n"
-#~ "individually, package that need to be updated are already selected, but "
-#~ "you\n"
-#~ "may choose to install other package or deselect packages. Press \"Install"
-#~ "\"\n"
-#~ "to install the updated package or \"Cancel\" not to upgrade them. (this\n"
-#~ "*REALLY* need to be modified according to real DrakX, if you need other\n"
-#~ "help section, let us (DrakX team developer) known)."
-#~ msgstr ""
-#~ "Anda dapat memilih upload paket terupdate yg dirilis setelah distribusi\n"
-#~ "tersedia. Anda akan mendapat fix keamanan atau kutu, tapi Anda perlu "
-#~ "punya\n"
-#~ "koneksi Internet terkonfigurasi untuk melanjutkan proses. Jawab \"Ya\" "
-#~ "pada\n"
-#~ "dialog untuk memilih mirror. Setelah memilih mirror, pohon seleksi paket\n"
-#~ "muncul agar Anda dapat memilih paket sendiri, paket yg perlu diupdate "
-#~ "telah\n"
-#~ "dipilihkan, tapi Anda dapat menginstal paket lain / melepas pilihan "
-#~ "paket.\n"
-#~ "Tekan \"Instal\" utk menginstal update paket atau \"Batal\" utk keluar.\n"
-#~ "(ini *BENAR-BENAR* perlu dimodifikasi menurut DrakX nyata, jika Anda "
-#~ "perlu\n"
-#~ "pertolongan lain, beritahu kami tim developer DrakX)."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Sambungkan koneksi Internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Putuskan koneksi Internet"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Konfigureasikan koneksi jaringan (LAN atau Internet)"
-
-#~ msgid "authentification"
-#~ msgstr "otentifikasi"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "Men-scan sumberdaya umum nfs yg tersedia"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "Men-scan sumberdaya umum nfs yg tersedia di server %s"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "Scan sumberdaya umum samba yg tersedia"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "Scan sumberdaya umum samba yg tersedia di server %s"
-
-#~ msgid "Removable media"
-#~ msgstr "Media removable"
-
-#~ msgid "Active"
-#~ msgstr "Aktif"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Printer dengan tipe \"%s\" telah terdeteksi di "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Alat printer lokal"
-
-#~ msgid "Printer Device"
-#~ msgstr "Device Printer"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "Nama device/file hilang!"
-
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Printer di server CUPS remote"
-
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Printer di server remote"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Mulai koneksi..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Tutup koneksi..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "Koneksi belum ditutup.\n"
-#~ "Cobalah lakukan secara manual sebagai root lalu ketikkan\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down"
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Sistem ini sekarang diputus koneksinya"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Pilih ukuran yang akan diinstal"
-
-#~ msgid "Total size: "
-#~ msgstr "Ukuran total: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Silakan tunggu, "
-
-#~ msgid "Total time "
-#~ msgstr "Total waktu "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Gunakan konfigurasi X11 yang ada?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Device mana yang terhubung ke printer\n"
-#~ "(ingat, /dev/lp0 = LPT1:) ?\n"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Awas, adaptor jaringan sudah dikonfigurasikan. Akan dikonfigurasikan lagi."
-
-#~ msgid "New"
-#~ msgstr "Baru"
-
-#~ msgid "Remote"
-#~ msgstr "Remote"
-
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr ""
-#~ "Klik tombol di atas\n"
-#~ "\n"
-#~ "Atau gunakan \"Baru\""
-
-#~ msgid "Use \"New\""
-#~ msgstr "Gunakan \"Baru\""
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr ""
-#~ "Jika daftar di atas tak memuat isian yg diinginkan, masukkan di sini:"
-
-#~ msgid "Shared resource"
-#~ msgstr "Sumberdaya umum"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Tak jelas (%s), coba lebih detil\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (default %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Pilihan Anda? (default %s  pilih 'none' untuk tidak ada) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "gagal baca file /etc/sysconfig/autologin: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Anda ingin restart network?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Setuju?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Saya akan me-restart device jaringan ini:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Device jaringan %s akan di-restart. Setuju ?"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Kecuali Anda tahu yg lain, umumnya dipilih \"/dev/hda\"\n"
-#~ "(disk IDE master primer) atau \"/dev/sda\" (disk SCSI pertama)."
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Printer berikut telah dikonfigurasi.\n"
-#~ "Anda boleh tambahkan atau mengubah yang sudah ada."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Timeout koneksi (detik) [ beta, belum diterapkan ]"
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Gagal set \"%s\" sbg printer default!"
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Silakan tes mouse Anda"
-
-#~ msgid "Press next to continue."
-#~ msgstr "Tekan Lanjutkan utk melanjutkan"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Pilihlan bahasa yang ingin Anda gunakan untuk instalasi dan sistem."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Anda harus menerima ketentuan dalam lisensi di atas untuk melanjutkan "
-#~ "proses instalasi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Silakan tekan \"Terima\" bila Anda setuju dengan persyaratan di atas.\n"
-#~ "\n"
-#~ "\n"
-#~ "dan silakan tekan \"Tolak\" bila Anda tidak setuju. Proses instalasi akan "
-#~ "dihentikan tanpa mengubah konfigurasi yang sudah ada."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Pilih layout keyboard yg dipakai dari daftar di atas"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Bila Anda menginginkan bahasa-bahasa lain selain bahasa yang Anda tadi "
-#~ "pilih pada saat setelah instalasi, silakan pilih pada daftar di atas. "
-#~ "Bila Anda mau semuanya, pilih saja \"Semuanya\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Pilih:\n"
-#~ "\n"
-#~ "  - Customized:  Bila Anda familiar dengan Linux, Anda akan dapat\n"
-#~ " memilih penggunaan sistem ini, yaitu normal, development, atau server.\n"
-#~ " Pilih \"Normal\" untuk instalasi secara umum yang biasanya. Atau pilih\n"
-#~ " \"Development\" untuk membuat software dengan Linux Anda, atau pilih\n"
-#~ " \"Server\" bila hendak menginstall server serbaguna (mail, print, dsb)\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ahli    :  Bila Anda sangat dekat dengan GNU/Linux dan ingin\n"
-#~ " menginstall Linux sesuka hati, ini adalah kelas instalasi yang pas\n"
-#~ " untuk Anda, dan Anda bisa memilih penggunaan sistem ini sebagaimana\n"
-#~ " pada kelas \"Customized\". JANGAN COBA-COBA PAKAI MODUS INI KALAU\n"
-#~ " belum cukup makan asam garam di dunia LINUX"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Berikut adalah pilihan penggunaan mesin Anda :\n"
-#~ "\n"
-#~ "*Workstation: pilih ini kalau Anda hendak menggunakan mesin Anda untuk "
-#~ "mengerjakan\n"
-#~ " pekerjaan sehari-hari di kantor atau di rumah\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: pilih ini bila Anda hendak menggunakan mesin ini untuk "
-#~ "pembuatan software.\n"
-#~ " Anda akan saya kasih kumpulan software yang berguna untuk melakukan "
-#~ "kompilasi,\n"
-#~ " debug, dan format source code, atau untuk membuat paket software\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server : Pilih ini bila Anda hendak menggunakan mesin ini sebagai\n"
-#~ " server. Entah itu file server (NFS ataw SMB), print server\n"
-#~ " (pakai protokol Unix lp (Line Printer) atau model windows SMB)\n"
-#~ " authentication server (NIS), database server dsb dsb.\n"
-#~ " Karena itu jangan mengharapken saya menyediakan rupa-rupa\n"
-#~ " software yang ngejreng (KDE,GNOME...) di sini."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Sekarang Anda pilih dulu grup paket yang mau Anda install\n"
-#~ "atau yang mau diupgrade.\n"
-#~ "\n"
-#~ "DrakX sekarang akan cek apakah Anda masih punya sisa space kosong untuk\n"
-#~ "menginstall ini semua, kalau tidak nanti Anda akan diberitahu kok.\n"
-#~ "Tapi kalau Anda mau cuek aja mau install walaupun spacenya tidak cukup\n"
-#~ "gua akan menginstall semua paketnya, tapi ada beberapa paket yang aku "
-#~ "rasa\n"
-#~ "kurang penting akan tidak diinstall. Pada daftar di bawah ini Anda bisa\n"
-#~ "pilih \"Pilih paket sendiri\"; kalau-kalau Anda pingin melihat \n"
-#~ "paket-paket yang ada (ada 1000an lebih...)"
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Anda dapat memilih tiap-tiap paket yang hendak Anda install\n"
-#~ "\n"
-#~ "\n"
-#~ "Anda dapat membuka atau menutup tree dengan mengklik pada pilihan di "
-#~ "sudut kiri pada\n"
-#~ "windows paket\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila Anda hendak melihat daftar paket yang diurut secara alfabet, pilih "
-#~ "ikon \"Togel flat dan urut grup\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila Anda tidak hendak diberitahu tentang dependensi paket, pilih "
-#~ "\"Dependensi otomatis\"\n"
-#~ "Dengan cara ini bila Anda membuang suatu paket, maka paket-paket terkait "
-#~ "lainnya akan dibuang\n"
-#~ "juga secara otomatis tanpa pemberitahuan."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Kalau Anda punya semua CD pada daftar di atas, tekan OK.\n"
-#~ "Kalau tidak punya sama sekali, click Baal.\n"
-#~ "Kalau cuma punya beberapa aja, pilih aja, trus klik Ok."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Anda kini dapat mencoba mouse. Gunakan tombol dan roda utk mencek\n"
-#~ "setting. Jika hasilnya buruk, klik \"Batal\" utk memilih driver lain.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jika Anda sedang menginstal mesin Apple dg mouse 1-tombol, ada "
-#~ "kesempatan\n"
-#~ "mendefinisikan keyboard utk mengemulasi tombol ke-2 dan ke-3.\n"
-#~ "Ini menjadikan Anda dapat mengakses fungsi penuh mouse dalam\n"
-#~ "konsol Linux dan GUI Window X.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jika Anda punya mouse ADB, pilihlah USB, karena kernel Linux akan "
-#~ "melakukan\n"
-#~ "mapping hardware mouse Anda."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Bila Anda hendak menghubungkan komputer ini ke Internet atau ke jaringan\n"
-#~ "lokal, silakan pilih konfigurasi yang benar. Nyalakan perangkat terkait "
-#~ "sebelum\n"
-#~ "memilih konfigurasi agar dapat dideteksi oleh DrakX secara otomatis.\n"
-#~ "\n"
-#~ "\n"
-#~ "BIla anda tidak memiliki koneksi ke Internet atau jaringan lokal, pilih "
-#~ "saja\n"
-#~ "\"Matikan Jaringan\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila Anda hendak mengkonfigurasikan jaringan nanti setelah proses "
-#~ "instalasi selesai,atau bila Anda sudah selesai mengkonfigurasikan koneksi "
-#~ "jaringan, pilih \"Selesai\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Saya tidak dapat menemukan modem di komputer ini. Silakan pilih port "
-#~ "serial mana\n"
-#~ "modem Anda dicolokkan.\n"
-#~ "\n"
-#~ "\n"
-#~ "sebagai misal, port serial pertama (pada Microsoft windows dikenal dengan "
-#~ "\"COM1\")\n"
-#~ "adalah \"ttyS0\" di GNU/Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Sekarang Anda bisa memasukan pilihan dialup. Bila Anda tidak tahu\n"
-#~ "atau ragu-ragu, informasi yang benar bisa Anda tanyakan kepada\n"
-#~ "Internet Service Provider tempat Anda berlangganan. Bila Anda tidak\n"
-#~ "memasukan DNS (name server) di sini, informasi tersebut akan\n"
-#~ "saya cari sendiri pada Internet Service Provider Anda saat melakukan "
-#~ "koneksi nanti."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Bila modem yang Anda punya adalah modem eksternal, maka tolong dong "
-#~ "dinyalakan supaya DrakXbisa mendeteksinya secara otomatis."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Silakan nyalakan modemnya dan pilih mana modem yang Anda punya"
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Bila Anda tidak yakin dengan informasi di atas apakah benar atau tidak\n"
-#~ "atau bahkan bila Anda sangat tidak tahu atau ragu mau isi apa, tenang "
-#~ "saja\n"
-#~ "informasi di atas bisa Anda tanyakan kepada Internet Service Provider "
-#~ "Anda.\n"
-#~ "Bila Anda tidak mengisi DNS (name server) di sini, nanti akan saya cari "
-#~ "sendiri\n"
-#~ "dari Internet Service Provider saat melakukan koneksi ke Internet."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Anda bisa masukkan nama host Anda sekarang. Bila Anda tidak yakin apa "
-#~ "yang harus dimasukkan,\n"
-#~ "informasi ini bisa diperoleh dari ISP."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Silakan konfigurasikan device jaringan Anda:\n"
-#~ "\n"
-#~ "  * Alamat IP: Kalau Anda tak tahu, tanyakan sana pada network "
-#~ "administratornya.\n"
-#~ "     Jangan masukkan alamat IP kalau Anda pilih \"IP Otomatis\" di "
-#~ "bawah.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Netmask: Pilih aja \"255.255.255.0\", kecuali kalau ragu tanya juga "
-#~ "ke\n"
-#~ " network administratornya.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - IP otomatis: Bila network Anda menggunakan bootp atau protokol dhcp, "
-#~ "pilih\n"
-#~ " ini. Bila Anda pilih ini, tak usah masukkan alamat IP di \"Alamat IP\". "
-#~ "Bila\n"
-#~ " Anda ragu juga, tanya lagi ke network administrator."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Anda sekarang bisa memasukan nama host. Bila Anda tidak tahu atau ragu\n"
-#~ "silakan kontak network administrator Anda saja."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Sekarang Anda boleh memasukan nama host. Bila tidak tahu\n"
-#~ "atau tidak pasti, kosongkan saja deh."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Anda bisa masukkan dialup sekarang. Bila Anda tak yakin apa yang harus "
-#~ "dimasukkan,\n"
-#~ "informasi ini bisa diperoleh dari ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Bila Anda mau pakai proxy, sekarang saatnya untuk mengkonfigurasi. Bila "
-#~ "Anda\n"
-#~ "tak tahu pakai proxy apa tak, tanya gih ke network administratornya atau "
-#~ "ISP."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Anda bisa install paket kriptografi bila koneksi Internet Anda telah\n"
-#~ "dikonfig dengan benar. Sekarang pilih mirror tempat Anda ingin download\n"
-#~ "paket kriptografinya dan kemudian pilih paketnya.\n"
-#~ "\n"
-#~ "Perhatikan bahwa Anda harus pilih mirror dan kriptografi sesuai "
-#~ "ketentuan\n"
-#~ "yang berlaku di daerah Anda."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Sekarang pilih zonawaktu tempat Anda tinggal"
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Sekarang Anda bisa mengkonfigurasikan printer lokal (terhubung ke "
-#~ "komputer Anda) atau\n"
-#~ "printer remote (yang diakses via jaringan Unix, Netware, atau Microsoft "
-#~ "windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Bila Anda ingin dapat mencetak, silakan pilih sistem cetak CUPS atau LPR\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS adalah sistem cetak baru dan powerfull di Unix (CUPS = \"Common "
-#~ "Unix\n"
-#~ "Printing System\"). Ini adalah sistem cetak standar Linux Mandrake.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR adalah sistem cetak kuno, masih dipakai pada versi lama Linux "
-#~ "Mandrake.\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila Anda tak punya printer, pilih \"Tidak Ada\""
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux dapat menggunakan berbagai jenis printer. Tiap-tiap tipe "
-#~ "memerlukan setup\n"
-#~ "yang berbeda\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila printer tersambung secara fisik dalam komputer ini, pilih\n"
-#~ "\"Printer Lokal\". \n"
-#~ "\n"
-#~ "Bila Anda menggunakan printer Unix jarak jauh, pilih\n"
-#~ "\"Printer remote\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila Anda hendak menggunakan printer pada mesin Microsoft windows (atau\n"
-#~ "pada mesin Unix dengan SMB), maka pilih \"SMB/WIndows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Silakan nyalakan printer sebelum DrakX mendeteksinya.\n"
-#~ "\n"
-#~ "Anda perlu mengisi beberapa informasi di sini.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nama printer: spooler cetak menggunakan nama \"lp\" sebagai nama "
-#~ "printer default\n"
-#~ "Jadi Anda pelru punya sebuah printer dengan nama \"lp\". Bila Anda "
-#~ "memiliki cuma \n"
-#~ "satu buah printer saja, Anda bisa menggunakan beberapa nama. Tuliskan "
-#~ "saja nama\n"
-#~ "itu dan pisahkan dengan karakter pipe \"|\". Jadi untuk memberi nama "
-#~ "printer dengan\n"
-#~ "nama yang mudah dimengerti, Anda bisa tuliskan: \"Printer saya|lp\".\n"
-#~ "   Printer yang memiliki \"lp\" pada namanya akan menjadi printer "
-#~ "default.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Deskripsi: ini boleh diisi boleh tidak, tapi bila diisi akan lebih "
-#~ "memudahkan Anda\n"
-#~ "untuk membedakan antara printer bila Anda memiliki printer lebih dari "
-#~ "satu buah atau bila\n"
-#~ "printer ini akan diakses oleh banyak orang.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Lokasi: Anda bisa menuliskan informasi lebih detil tentang lokasi "
-#~ "printer ini.\n"
-#~ "(misalnya \"Printer yang ada di lantai 2\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Anda perlu memasukkan beberapa informasi di sini.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nama antrian: spooler cetak menggunakan nama \"lp\" sebagai nama "
-#~ "printer default\n"
-#~ "Jadi Anda pelru punya sebuah printer dengan nama \"lp\". Bila Anda "
-#~ "memiliki cuma \n"
-#~ "satu buah printer saja, Anda bisa menggunakan beberapa nama. Tuliskan "
-#~ "saja nama\n"
-#~ "itu dan pisahkan dengan karakter pipe \"|\". Jadi untuk memberi nama "
-#~ "printer dengan\n"
-#~ "nama yang mudah dimengerti, Anda bisa tuliskan: \"Printer saya|lp\".\n"
-#~ "   Printer yang memiliki \"lp\" pada namanya akan menjadi printer "
-#~ "default.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Direktori Spool: Dalam direktori ini semua job printer akan "
-#~ "disimpan. BIla Anda tidak\n"
-#~ "mengerti biarkan saja terisi dalam nilai defaultnya.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Koneksi Printer: Bila printer tersambung secara fisik dalam komputer "
-#~ "ini, pilih\n"
-#~ "\"Printer Lokal\". Namun bila Anda menggunakan printer Unix jarak jauh, "
-#~ "pilih\n"
-#~ "\"Printer lpd remote\".\n"
-#~ "\n"
-#~ "\n"
-#~ "   Bila Anda hendak menggunakan printer pada mesin Microsoft windows "
-#~ "(atau\n"
-#~ "pada mesin Unix dengan SMB), maka pilih \"SMB/WIndows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "   Bila Anda hendak mengakses printer pada jaringan Netware, pilih "
-#~ "\"Netware\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Printer Anda tidak dapat dideteksi. Silakan tuliskan nama device atau di "
-#~ "mana printer Anda\n"
-#~ "tersambung.\n"
-#~ "\n"
-#~ "\n"
-#~ "Sebagai contoh, printer yang disambung ke port paralel pertama komputer "
-#~ "disebut\n"
-#~ "\"/dev/lp0\" pada GNU/Linux, dan disebut \"LPT1\" pada wicrosoft mindows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Anda harus pilih printer yang Anda punya pada daftar di atas."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Silakan pilih konfigurasi yang tepat bergantung tipe printer yang Anda "
-#~ "punya.\n"
-#~ "Silakan baca dokumentasinya bila Anda tidak tahu harus pilih apa di "
-#~ "sini.\n"
-#~ "\n"
-#~ "\n"
-#~ "Anda akan dapat melakukan test pada konfigurasi ini nanti dan bisa juga\n"
-#~ "mengubah konfigurasi ini bila tidak berjalan sebagaimana mestinya."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Sekarang Anda mesti berikan katasandi root untuk\n"
-#~ "sistem Linux-Mandrake ini. Katasandi harus diketikkan dua kali untuk\n"
-#~ "verifikasi bahwa Anda tidak salah ketik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root adalah administrator sistem. Hanya orang yang punya akses ke\n"
-#~ "account administrator saja yang dapat mengatur dan mengelola sistem.\n"
-#~ "Awas, account administrator yang disalahgunakan atau dipakai\n"
-#~ "tanpa izin akan sangat membahayakan integritas sistem, data,\n"
-#~ "dan sistem lain yang terhubung. \n"
-#~ "\n"
-#~ "\n"
-#~ "Katasandi haruslah campuran dari\n"
-#~ "karakter alfanumerik dan panjangnya minimal 8 karakter. Jangan\n"
-#~ "pernah menuliskan katasandi Anda di kertas atau di mana saja. \n"
-#~ "\n"
-#~ "Jangan buat katasandi Anda terlalu panjang atau rumit, nanti bisa lupa."
-
-#~ msgid ""
-#~ "If your network uses the LDAP (or NIS) protocol for authentication, "
-#~ "select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Jika jaringan Anda memakai protokol otentikasi LDAP/NIS, pilih\n"
-#~ "\"LDAP\" (atau \"NIS\") . Jika Anda tak tahu, tanyalah admin jaringan "
-#~ "Anda.\n"
-#~ "\n"
-#~ "Jika komputer tak terhubung jaringan, Anda dapat memilih\n"
-#~ "\"File lokal\" utk otentikasi."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Silakan Anda buat satu atau lebih user \"biasa\", setelah Anda\n"
-#~ "membuat user \"pihak berwenang\", yaitu root. Anda bisa buat\n"
-#~ "user untuk tiap orang yang Anda perbolehkan untuk mengakses komputer\n"
-#~ "ini. Perhatikan bahwa tiap account user akan memiliki preferesi\n"
-#~ "sendiri-sendiri (environment grafis, seting program dsb)\n"
-#~ "dan juga punya \"direktori home\" sendiri, tempat preferensi tadi\n"
-#~ "disimpan\n"
-#~ "\n"
-#~ "\n"
-#~ "Pertama-tama, buatlah account untuk Anda sendiri! Buatlah walau Anda\n"
-#~ "adalah satu-satunya orang yang mengakses mesin ini. Anda nanti tidak\n"
-#~ "BOLEH mengakses mesin ini untuk keperluan sehari-hari, karena merupakan\n"
-#~ "resiko besar bila Anda sering login sebagai root. Biasanya ini "
-#~ "disebabkan\n"
-#~ "karena salah ketik, dsb.\n"
-#~ "\n"
-#~ "\n"
-#~ "Karena itu, biasakan untuk konek ke msein ini dengan menggunakan account\n"
-#~ "yang telah Anda buat disini, dan login sebagai root, hanya untuk \n"
-#~ "keperluan administratif dan maintenance saja yah."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Sangat disarankan Anda membuat bootdisk. Bila Anda gagal\n"
-#~ "memboot komputer, bootdisk adalah satu-satunya cara untuk\n"
-#~ "menyelamatkan sistem tanpa instal ulang."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Pilihan LILO dan grub adalah:\n"
-#~ "  - Boot device: Set nama devicenya (misalnya hard disk partisi) yang "
-#~ "berisi boot sector\n"
-#~ "                 pilih \"/dev/hda\", kecuali kalau Anda tahu yang "
-#~ "pastinya.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay sebelum boot ke image default: Menentukan waktu dalam "
-#~ "sepersepuluh detik\n"
-#~ " sebelum boot loader akan meload image yang default (pertama). Ini "
-#~ "berguna\n"
-#~ " pada sistem yang boot dari hard disk dan keyboardnya dinyalakan. Boot "
-#~ "loader\n"
-#~ " tidak menunggu bila \"delay\" dihilangkan atau diset ke nol.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Video mode: Menentukan mode text VGA yang dipilih saat booting. \n"
-#~ " Setting yang bisa dipakai: \n"
-#~ "  * normal: pilih mode text 80x25\n"
-#~ "  * <angka>: gunakan mode text.\n"
-#~ "\n"
-#~ "\n"
-#~ "   - Hapus \"/tmp\" saat boot bila Anda ingin menghapus semua file-file "
-#~ "di dalam direktori\n"
-#~ "\"/tmp\" saat boot sistem dimulai.\n"
-#~ "\n"
-#~ "\n"
-#~ "   - Ukuran RAM yang tepat. Duh, ngga ada metode standar untuk "
-#~ "mendapatkan \n"
-#~ "angka jumlah RAM yang tepat di komputer tertentu. Jadi, Linux mungkin "
-#~ "akan\n"
-#~ "salah mendeteksi jumlah RAM yang Anda punya sekarang. Bila benar, saya "
-#~ "salah\n"
-#~ "tebak angka RAMnya di sini, silakan masukkan angka yang benar. Oh ya,\n"
-#~ "beda 2 atau 4 MB sih ngga masalah loh."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO adalah bootloader untuk SPARC: Dianya akan memboot\n"
-#~ "GNU/Linux atau sistem operasi lain yang ada di komputer ini.\n"
-#~ "Biasanya, sistem operasi yang sudah ada akan secara normal di deteksi "
-#~ "dan\n"
-#~ "diinstallkan. Bila ternyata nanti tak bisa, Anda bisa tambahkan sendiri\n"
-#~ "secara manual di sini. Hati-hati yah nanti waktu kasih parameternya.\n"
-#~ "\n"
-#~ "\n"
-#~ "Anda juga bisa menutup akses ke sistem operasi tertentu. Caranya gampang "
-#~ "aja\n"
-#~ "Anda bisa hapus entrinya di sini. Tapi untuk bisa masuk ke sistem operasi "
-#~ "itu\n"
-#~ "Anda perlu bootdisk nantinya."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Pilihan SILO dan grub adalah:\n"
-#~ "  - Instalasi Bootloader: Tempat Anda hendak meletakkan informasi boot\n"
-#~ " ke GNU/Linux. Pilih aja \"Sektor pertama di drive (MBR)\", kecuali\n"
-#~ " elu udah tau tempatnya\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay sebelum boot ke image default: Menentukan waktu dalam "
-#~ "sepersepuluh detik\n"
-#~ " sebelum boot loader akan meload image yang default (pertama). Ini "
-#~ "berguna\n"
-#~ " pada sistem yang boot dari hard disk dan keyboardnya dinyalakan. Boot "
-#~ "loader\n"
-#~ " tidak menunggu bila \"delay\" dihilangkan atau diset ke nol."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Sekarang Anda akan mengkonfigurasikan X Window System, yang merupakan\n"
-#~ "inti GUI (Graphical User Interface) bagi GNU/Linux. Sekarang,\n"
-#~ "Anda harus konfigurasikan video card dan monitor. Biasanya\n"
-#~ "tahapan ini akan otomatis, tapi Anda perlu verifikasi\n"
-#~ "hasil deteksi dan memeriksanya, benar apa tidak:)\n"
-#~ "\n"
-#~ "\n"
-#~ "Setelah itu, X akan dijalankan (kecuali kalau Anda bilang jangan)\n"
-#~ "dan periksa apakah settingnya sudah cocok atau belum.\n"
-#~ "Kalau tidak cocok, Anda bisa kembali lagi dan mengubah konfigurasi\n"
-#~ "lalu coba lagi."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Bila ada yang ngaco pada konfigurasi Xnya, silaken pakai pilihan ini "
-#~ "untuk\n"
-#~ "membuat X Window System lebih bagus."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Bila Anda ingin menggunakan login grafis, pilih \"Ya\". Sebaliknya,\n"
-#~ "pilih \"Tidak\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Silakan pilih tingkat keamanan sistem ini. Baca dulu manualnya untuk info "
-#~ "lebihlengkap\n"
-#~ "Kalau Anda tak tahu, pilih saja default.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Sistem Anda akan diboot ulang.\n"
-#~ "\n"
-#~ "Setelah itu, Linux Mandrake akan di-load otomatis.\n"
-#~ "Bila Anda ingin boot ke sistem operasi lain, silakan baca instruksi\n"
-#~ "tambahan."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Ceko (Pemrogram)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovakia (Pemrogram)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Beri nama profil yang hendak dibuat:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Tulis /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Format semua"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Setelah melakukan format semua partisi,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "seluruh data dalam partisi-partisi ini akan hilang"
-
-#~ msgid "Reload"
-#~ msgstr "Muat ulang"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Mau buat disket auto install untuk replikasi linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "konfigurasi ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Dengan server CUPS remote, Anda tidak perlu mengkonfigurasikan\n"
-#~ "printer di sini; printer nantinya akan secara otomatis dideteksi\n"
-#~ "kecuali servernya ada di jaringan lain; dalam hal ini, Anda perlu\n"
-#~ "memasukan alamat IP server CUPS itu dan nomor portnya kalau ada."
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "Isi Nama Printer dan Komentar"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Nama antrian remote hilang!"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "Di sini Anda dapat menentukan perintah sebarang di mana job harus "
-#~ "disodorkan, bukannya dikirim langsung ke printer."
-
-#~ msgid "Command line"
-#~ msgstr "Perintah"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Harus diisi perintah"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Pemantauan Jaringan"
-
-#~ msgid "Profile "
-#~ msgstr "Profil "
-
-#~ msgid "Statistics"
-#~ msgstr "Statistik"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Kecepatan Kirim"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Kecepatan Terima: "
-
-#~ msgid "Connection Time: "
-#~ msgstr "Waktu koneksi: "
-
-#~ msgid "Logs"
-#~ msgstr "Log"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Sambung koneksi Internet "
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Putuskan koneksi Internet "
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "koneksi Internet gagal diputus."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "koneksi Internet selesai diputus."
-
-#~ msgid "Connection complete."
-#~ msgstr "Koneksi selesai."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Koneksi gagal\n"
-#~ "Silakan periksa konfigurasinya di Mandrake Control Center"
-
-#~ msgid "sent: "
-#~ msgstr "terkirim: "
-
-#~ msgid "received: "
-#~ msgstr "diterima: "
-
-#~ msgid "average"
-#~ msgstr "rata-rata"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Runlevel Standar"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Isi file konfigurasi tidak dapat dibaca"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Config file tidak dikenal"
-
-#~ msgid "Adapter"
-#~ msgstr "Adaptor"
-
-#~ msgid "Disable network"
-#~ msgstr "Matikan jaringan"
-
-#~ msgid "Enable network"
-#~ msgstr "Aktifkan jaringan"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Sekarang mouse Anda dapat dites. Gunakan tombol dan rodanya untuk\n"
-#~ "mengecek setting-nya. Bila belum baik, pilih \"Batal\" untuk kembali\n"
-#~ "memilih driver yang lain."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Konfigurasi koneksi DSL (atau ADSL)"
-
-#~ msgid "Choose"
-#~ msgstr "Pilih"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Anda bisa memasukan URI untuk mengakses printer dengan CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Ya, tes cetak ascii"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Ya, tes cetak postscript"
-
-#~ msgid "Paper Size"
-#~ msgstr "Ukuran Kertas"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Kertas di-eject setelah mencetak?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Parameter driver Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Pilihan kedalaman warna"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Cetak text dalam PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Betulkan efek tangga pada teks?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Jumlah halaman per output"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Margin Kiri/Kanan dalam point (1/72 inci)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Margin Atas/Bawah dalam point (1/72 inci)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Extra option pada GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Pilihan text extra"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Balikkan urutan halaman"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS dijalankan"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Pilih koneksi Printer remote"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Tiap antrian cetak harus punya nama (biasanya lp).\n"
-#~ "Parameter lain seperti keterangan dan lokasi printer bisa ditambahkan.\n"
-#~ "Sekarang saya mau tanya,\n"
-#~ "nama printer yang digunakan ini apa yah ?\n"
-#~ "Juga saya mau tanya bagaimana printernya disambungkan ke situ?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Tiap antrian cetak harus punya nama (biasanya lp) dan direktori spool\n"
-#~ "yang dialokasikan untuknya. Sekarang saya mau tanya,\n"
-#~ "nama antrian dan direktori yang digunakan apa yah ?\n"
-#~ "Juga saya mau tanya bagaimana printernya disambungkan ke situ?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nama Antrian"
-
-#~ msgid "Spool directory"
-#~ msgstr "Direktori spool"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Agar sistem Anda lebih secure, silakan pilih \"Gunakan file shadow\" "
-#~ "dan \n"
-#~ "\"Pakai katasandi MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Jika network Anda menggunakan NIS, pilih \"Gunakan NIS\". Jika tak tahu,\n"
-#~ "tanya admin jaringan Anda."
-
-#~ msgid "yellow pages"
-#~ msgstr "halaman kuning"
-
-#~ msgid "Light configuration"
-#~ msgstr "Konfigurasi ringan"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS Provider 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS Provider 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Pilih cara yang Anda inginkan untuk terhubung ke Internet"
-
-#~ msgid "cannot fork: "
-#~ msgstr "tidak bisa fork: "
-
-#~ msgid "Configure..."
-#~ msgstr "Konfigurasikan..."
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Ukuran yang dipilih %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Buka koneksi..."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Skrip ini akan meload modul untuk mouse usb"
diff --git a/perl-install/share/po/id.xsl b/perl-install/share/po/id.xsl
deleted file mode 100644
index 4897a204f..000000000
--- a/perl-install/share/po/id.xsl
+++ /dev/null
@@ -1,5 +0,0 @@
-<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
-<xsl:template match="/">
-  <xsl:copy-of select="."/>
-</xsl:template>
-</xsl:stylesheet>
diff --git a/perl-install/share/po/is.po b/perl-install/share/po/is.po
deleted file mode 100644
index 03cddfd32..000000000
--- a/perl-install/share/po/is.po
+++ /dev/null
@@ -1,12530 +0,0 @@
-# Translation file for Mandrake graphic install, DrakX
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (C) 1999 Mandrakesoft
-# J�hann �orvar�arson <johann.torvardarson@lais.is>, 1999-2000
-# ��rarinn (Tony) R. Einarsson <thori@mindspring.com>, 1999-2000
-#
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-01-05 18:53-0500\n"
-"Last-Translator: Thorarinn Einarsson <teinarsson@nc.rr.com>\n"
-"Language-Team: Icelandic\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "Les uppsetningarskr�"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Skj�kort"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Veldu skj�kort"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Veldu X �j�n"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X �j�nn"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Veldu X �j�n"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X �j�nn"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-#, fuzzy
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Hverju viltu b�ta vi�?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-#, fuzzy
-msgid "XFree configuration"
-msgstr "Lokauppsetning"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Veldu minnisst�r� skj�kortsins"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Veldu valm�guleika fyrir �j�n"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Veldu skj�"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Skj�r"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"H�r �arf a� gefa upp 'horizontal sync' t��ni skj�sins ��ns. �� getur\n"
-"vali� t��nisvi� a� ne�an sem passar vi� sta�la�a skj�i e�a gefi� upp\n"
-"eitthva� anna�.\n"
-"\n"
-"�a� er MJ�G MIKILV�GT a� velja ekki of h�tt t��nisvi� fyrir skj�inn. Hafir\n"
-"�� einhverjar efasemdir, veldu �� l�gri stillingar."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "L�r�tt t��ni"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "L��r�tt t��ni"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Skj�r ekki skilgreindur"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Skj�kort ekki skilgreint enn"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Upplausn ekki valin enn"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Viltu pr�fa skilgreininguna"
-
-#: ../../Xconfigurator.pm_.c:650
-#, fuzzy
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "A�v�run: Pr�fanir eru varasamar me� �etta skj�kort"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Pr�funar skilgreining"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"pr�fa�u a� breyta stillingum"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Villa �tti s�r sta�"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "H�tti eftir %d sek�ndur"
-
-#: ../../Xconfigurator.pm_.c:742
-#, fuzzy
-msgid "Is this the correct setting?"
-msgstr "Er �etta r�tt?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Villa kom upp, reyndu a� breyta f�ribreytum"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Upplausn"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Veldu upplausn og fj�lda lita"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Skj�kort: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 �j�nn: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-#, fuzzy
-msgid "More"
-msgstr "F�ra"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "� lagi"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Expert Mode"
-msgstr "F. snillinga"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "S�na alla"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Upplausnir"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tegund lyklabor�s: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tegund m�sar: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "M�s: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Skj�r: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "L�r�tt t��ni skj�s: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "L��r�tt t��ni skj�s: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Skj�kort: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Skj�kort: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Skj�kortsminni: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, fuzzy, c-format
-msgid "Color depth: %s\n"
-msgstr "Stillingar � litad�pt"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, fuzzy, c-format
-msgid "Resolution: %s\n"
-msgstr "Upplausnir"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 �j�nn: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, fuzzy, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 �j�nn: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Undirb� X-Window skilgreiningu"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Hva� viltu gera?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Skipta um skj�"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Skipta um skj�kort"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Breyta �j�ns m�guleikum"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Breyta upplausn"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "S�na uppl�singar"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Pr�fa aftur"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "H�tta"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, fuzzy, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr "Halda n�verandi IP stillingum"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X � r�singu"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"�g get stillt t�lvuna ��na til a� kveikja sj�lfvirkt � X vi� r�singu\n"
-"Vilt �� kveikja � X vi� endurr�singu?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Stimpla�u �ig aftur inn � %s til a� virkja breytingarnar"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Stimpla�u �ig �t og sl��u � Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 litir (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ��sund litir (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ��sund litir (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milj�n litir (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljar�ar lita (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB e�a meira"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Sta�la� VGA, 640x480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Samh�ft, 1024x768 @ 87 Hz samtvinna� (ekkert 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 @ 87 Hz samtvinna�, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "�samtvinna� SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "H�t��ni SVGA, 1024x768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Skj�r sem r��ur vi� 1280x1024 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Skj�r sem r��ur vi� 1280x1024 @ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Skj�r sem r��ur vi� 1280x1024 @ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Skj�r sem r��ur vi� 1600x1200 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Skj�r sem r��ur vi� 1600x1200 @ 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "� fyrsta geira r�sidisksnei�ar"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "� r�sif�rsluna (MBR)"
-
-#: ../../any.pm_.c:120
-#, fuzzy
-msgid "SILO Installation"
-msgstr "Uppsetning LILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Hvert viltu setja r�sistj�rann?"
-
-#: ../../any.pm_.c:133
-#, fuzzy
-msgid "LILO/grub Installation"
-msgstr "Uppsetning LILO"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-#, fuzzy
-msgid "Yaboot"
-msgstr "R�t"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-#, fuzzy
-msgid "Bootloader main options"
-msgstr "Stillingar LILO"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-#, fuzzy
-msgid "Bootloader to use"
-msgstr "Stillingar LILO"
-
-#: ../../any.pm_.c:169
-#, fuzzy
-msgid "Bootloader installation"
-msgstr "Stillingar LILO"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "R�sit�ki"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr ""
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Sam�jappa�"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "sam�jappa�"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Skj�hamur"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "T�f ��ur en sj�lfgefin r�sing byrjar"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Lykilor�"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Lykilor� (aftur)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Takmarka alla rofa � skipanl�nu"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "takmarka"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr ""
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "N�kv�m st�r� vinnsluminnis (fann %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr ""
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Sl��u inn vinnsluminni � MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Valkosturinn ``Takmarka alla rofa � skipanal�nu'' gerir ekkert �n lykilor�s"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Reyndu aftur"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Mismunandi lykilor�"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-#, fuzzy
-msgid "Default OS?"
-msgstr "Sj�lfgefi�"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-#, fuzzy
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"H�rna eru n�verandi stillingar LILO .\n"
-"�� getur b�tt vi� fleirum e�a breytt �essum."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "B�ta vi�"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "B�i�"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Breyta RAID"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Hverju viltu b�ta vi�?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "��ru st�rikerfi (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "��ru st�rikerfi (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "��ru st�rikerfi (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "R�sikjarna"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "R�t"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "B�ta aftan vi�"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Les-skrif"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tafla"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "��ruggt"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Nafn"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Sj�lfgefi�"
-
-#: ../../any.pm_.c:326
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Fjarl�gja"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Autt er ekki leyft"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "�� ver�ur a� hafa diskminni"
-
-#: ../../any.pm_.c:341
-#, fuzzy
-msgid "This label is already used"
-msgstr "�etta nafn er n� �egar � notkun."
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fann %s %s tengi"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Er kannski eitt enn � v�linni?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Eru einhver %s tengi � t�lvunni?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nei"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "J�"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Sko�a�u v�lb�na�aruppl�singar"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Set inn rekil fyrir %s korti� %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(eining %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hva�a %s rekil viltu pr�fa?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"� sumum tilfellum �arf rekillinn %s auka vi�f�ng svo hann virki r�tt,\n"
-" �� hann virki vel � flestum tilfellum �n �eirra.  Viltu setja inn auka\n"
-" vi�f�ng e�a leyfa reklinum sj�lfum a� leita a� �eim uppl�singum sem\n"
-" hann �arf?  Stundum frystir sj�lfvirk stilling v�lina en �a� �tti ekki\n"
-"a� skemma neitt."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Stilla sj�lfvirkt"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Stilla handvirkt"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-# ## skrytid
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"�� getur n�na gefi� upp vi�f�ng fyrir eininguna %s.\n"
-"Vi�f�ng eru gefin upp sem ``vi�fang=gildi vi�fang2=gildi2 ...''.\n"
-"Til d�mis: ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Stillingar kjarnaeininga:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Innsetning � einingu %s mist�kst.\n"
-"Viltu pr�fa aftur me� �l�k vi�f�ng?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s er n� �egar til)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "�etta lykilor� er of einfalt"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Vinsamlega sl��u inn notandanafn"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Notandanafni� m� bara innihalda litla stafi, t�lustafi, `-' og `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "�etta notandanafn er n� �egar til"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "B�ta vi� notanda"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Sl��u inn notanda\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Sam�ykkja notanda"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nafn notanda"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Notandanafn:"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Skel"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr ""
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr ""
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"�g get stillt t�lvuna ��na til a� kveikja sj�lfvirkt � X vi� r�singu\n"
-"Vilt �� kveikja � X vi� endurr�singu?"
-
-#: ../../any.pm_.c:833
-#, fuzzy
-msgid "Choose the default user:"
-msgstr "Veldu n�ja st�r�"
-
-#: ../../any.pm_.c:834
-#, fuzzy
-msgid "Choose the window manager to run:"
-msgstr "Veldu forriti� sem �� vilt nota"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Hvernig m�s ertu me�?"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr ""
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "B�ta vi� notanda"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-#, fuzzy
-msgid "Custom"
-msgstr "S�rlaga�a"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "Sta�bundinn prentari"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Hva�a pakka viltu setja inn"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "H�tta vi�"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Velkomin(n) � t�lvu�rj�tinn"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "L�legt"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "H�tt"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "H�tt"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Taugaveikla�"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"�etta er hi� hef�bundna �ryggi sem m�lt er me� fyrir t�lvu sem ver�ur notu�\n"
-"til a� tengja vi� neti� sem bi�ill. �ryggisathuganir eru n�na � gangi. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"� �essu �ryggisstigi er or�i� m�gulegt a� nota t�lvuna sem �j�n.\n"
-"�ryggi� er n�gu n�gu miki� til a� taka vi� fyrirspurnum fr�\n"
-"m�rgum bi�lum. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Kerfi� er komi� � 4. stig og er n� alveg loka�.\n"
-"�ryggi� er � h�sta stigi."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Veldu �ryggisstig"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Stilli �ryggis�rep"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Veldu valm�guleika fyrir �j�n"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, fuzzy, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Velkomin(n) i %s styrikerfisraesistjorann!\n"
-"\n"
-"Sladu a <TAB> til ad fa lista yfir moegulega valkosti.\n"
-"\n"
-"Til raesa einn af theim, sl�du inn nafnid og sidan a <ENTER>\n"
-"eda biddu i %d sekundur thar til sjalfgefin raesing hefst.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr ""
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Hvert viltu setja r�sistj�rann?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Lokauppsetning"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-#, fuzzy
-msgid "/_File"
-msgstr "Skr�r:\n"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Skj�r"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Skipta um skj�"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Hringja inn me� m�taldi"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "R�sit�ki"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Veldu prenttengingu"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-#, fuzzy
-msgid "Configure"
-msgstr "Stilla X"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm_.c:114
-#, fuzzy, c-format
-msgid "%d seconds"
-msgstr "H�tti eftir %d sek�ndur"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Get ekki b�tt vi� disksnei�um"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "H�tta vi�"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belg�skt"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "��skt"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Gr�skt"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norkst"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Sko�a"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "�talskt"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "ra�tengd"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Vinsamlega taktu fyrst afrit af �llum g�gnum"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lestu vandlega!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Villa"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Veldu a�ger�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-#, fuzzy
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"�� hefur eina st�ra FAT disksnei�.\n"
-"(venjulega notu� af Microsoft DOS/Windows).\n"
-"�g legg til a� �� endursn��ir hana\n"
-"(smelltu � hana, s��an � \"Endursn��a\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Smelltu � disksnei�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "�tarleg atri�i"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "t�kst ekki a� tengja"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Diskminni"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "T�m"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Anna�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tegundir skr�akerfa:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "B�a til"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tegund"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Nota ``%s'' � sta�inn"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Ey�a"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Nota ``Aftengja'' fyrst"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, fuzzy, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "�ll g�gn � �essari disksnei� tapast"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Veldu a�ger�"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "B�a til n�ja disksnei�"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "F�ra � snillingsham"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Fara � venjulegan ham"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Endurheimta"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Halda samt �fram?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "H�tta �n �ess a� vista"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "H�tta �n �ess a� skrifa snei�at�fluna?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Viltu pr�fa skilgreininguna"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "R��stafa skj�lfkrafa"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Hreinsa allt"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "S�na uppl�singar"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "�ll a�al skr�arsni� eru � notkun"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Get ekki b�tt vi� disksnei�um"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Til a� f� fleiri disksnei�ar, vinsamlega eyddu einni til a� b�a til "
-"vi�b�tarsnei�"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Skrifa snei�at�flu"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Bjarga snei�at�flunni"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Bjarga snei�at�flunni"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Bjarga snei�at�flunni"
-
-# ## skrytid
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Sj�lfvirk tenging aukat�kja"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Velji� skr�"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Disksnei�in sem var tekin sem afrit er ekki af s�mu st�r�\n"
-"Halda �fram?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "A�v�run"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Settu diskling � drifi�\n"
-"�ll g�gn � �essum diskling tapast"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Reyni a� endurheimta disksnei�at�fluna"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "S�na uppl�singar"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Tengipunktur"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-#, fuzzy
-msgid "Options"
-msgstr "Uppl�singar"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Endurst�kka"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "F�ra"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Forsn��a"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Tengipunktur"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "B�ta vi� RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "B�ta vi� LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Aftengja"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Taka �r RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Taka �r LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Breyta RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "B�a til n�ja disksnei�"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Byrjunar geiri"
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "St�r� � MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tegund skr�akerfis:"
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Tengipunktur: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Valkostur:"
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Forsn�� disksnei� %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Breyta tegund snei�ar"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "Hva�a snei�tegund viltu?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, fuzzy, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Hvar viltu tengja t�ki %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hvar viltu tengja t�ki %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Reikna takmarkanir FAT skr�arkerfis..."
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Endursn��"
-
-#: ../../diskdrake/interactive.pm_.c:609
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Hva�a snei�tegund viltu?"
-
-#: ../../diskdrake/interactive.pm_.c:614
-#, fuzzy
-msgid "All data on this partition should be backed-up"
-msgstr "�ll g�gn � �essari disksnei� tapast"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, fuzzy, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "�ll g�gn � �essari disksnei� tapast"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Veldu n�ja st�r�"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "St�r� � MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Hva�a disk viltu f�ra til?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Geiri"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Hva�a geira viltu f�ra g�gn til?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "F�ri"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "F�ri disksnei�..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Veldu RAID sem til er fyrir til a� b�ta vi�"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "n�"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Veldu LVM sem til er fyrir til a� b�ta vi�"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nafn notanda"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:781
-#, fuzzy
-msgid "File already exists. Use it?"
-msgstr "Nafni� %s er �egar � notkun"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Stillingar kjarnaeininga:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "t�ki"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "stig"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "st�r� hlutar"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:906
-#, fuzzy
-msgid "What type of partitioning?"
-msgstr "Hvernig prentara ertu me�?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"�v� mi�ur get �g ekki sett /boot svona innarlega � drifi� (� s�valning > "
-"1024).\n"
-"Anna�hvort notar �� LILO og �a� mun ekki virka, e�a �� notar ekki LILO og "
-"sleppir �v� a� hafa /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Disksnei�in sem �� hefur vali� til a� nota sem r�t (/) er utan\n"
-"1024. s�valnings � har�a disknum og �� hefur enga /boot snei�.\n"
-"Ef �� �tlar a� nota LILO r�sistj�rann skaltu muna a� b�ta vi� /boot snei�"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Disksnei�atafla drifs %s mun ver�a skrifu� � disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "�� �arft a� endurr�sa ��ur en breytingar taka gildi"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, fuzzy, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "�ll g�gn � �essari disksnei� tapast"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Forsn��ing"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, fuzzy, c-format
-msgid "Formatting loopback file %s"
-msgstr "Forsn�� disksnei� %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Forsn�� disksnei� %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "B�a til n�ja disksnei�"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "B�a til n�ja disksnei�"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Upplausnir"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "T�ki: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS drifstafur: %s (bara �giskun)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tegund: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Byrja: geiri %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "St�r�: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s geirar"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "S�valningur %d til %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Forsni�inn\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Ekki forsni�inn\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Tengdur\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Sj�lfgefin disksnei� r�st\n"
-"    (fyrir MS-DOS r�singu, ekki fyrir LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Stig %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Hlunkast�r� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskar %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "St�r�: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Skilgreining: %s s�valningar, %s hausar, %s geirar\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Uppl�singar: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskar %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, fuzzy, c-format
-msgid "Partition table type: %s\n"
-msgstr "R�tardisksnei�"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "� gagnabraut %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, fuzzy, c-format
-msgid "Options: %s"
-msgstr "R�tardisksnei�"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Tegund skr�akerfis:"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "�etta lykilor� er of einfalt (ver�ur a� vera minnst %d stafa langt)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Mismunandi lykilor�"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Breyta tegund snei�ar"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Smelltu � disksnei�"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Nafnami�lari"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, fuzzy, c-format
-msgid "%s formatting of %s failed"
-msgstr "gat ekki forsni�i� %s"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "kann ekki a� forsn��a %s af tegundinni %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "villa vi� a� aftengja %s: %s"
-
-#: ../../fsedit.pm_.c:21
-#, fuzzy
-msgid "simple"
-msgstr "Skr�"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "net�j�nn"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Heiti tengipunkta ver�a a� byrja � /."
-
-#: ../../fsedit.pm_.c:478
-#, fuzzy, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "�a� er �egar disksnei� me� tengipunktinn %s"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Villa vi� a� opna %s til skriftar: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"�a� kom upp villa. Engin t�ki fundust sem unnt er a� b�a til n� skr�akerfi "
-"�. Vinsamlegast athuga�u v�lb�na�inn � leit a� ors�k vandam�lsins."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "�� hefur ekki neinar disksnei�ar"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Veldu tengi� sem �� vilt nota.  Tengi� COM1 � MS Windows er kalla�\n"
-"ttyS0 � Linux, COM2 er ttyS1, o.s.frv."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"H�r gefur �� upp hvar �� vilt l�ta ��r uppl�singar sem\n"
-"�arf til a� r�sa Linux.\n"
-"\n"
-"\n"
-"Veldu \"� r�sif�rsluna (MBR)\" nema �� vitir n�kv�mlega\n"
-"hva� �� ert a� gera."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Get ekki nota� �tsendingu �n NIS l�ns"
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Settu t�man diskling � drif %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "villa vi� lestur �r skr�nni %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"�� ver�ur a� hafa r�tarsnei� fyrir Linux.  B��u �v� anna�hvort\n"
-"til r�tarsnei� e�a veldu snei� sem n� �egar er til � disknum.\n"
-"Veldu s��an ``Tengipunktur'' og sl��u inn `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "�� ver�ur a� hafa diskminni"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"�� hefur ekkert diskminni\n"
-"\n"
-"Halda samt �fram?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "�� ver�ur a� hafa diskminni"
-
-#: ../../install_interactive.pm_.c:90
-#, fuzzy
-msgid "Use free space"
-msgstr "Notandanafn:"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-#, fuzzy
-msgid "Use existing partition"
-msgstr "Forsn�� disksnei� %s"
-
-#: ../../install_interactive.pm_.c:102
-#, fuzzy
-msgid "There is no existing partition to use"
-msgstr "Reyni a� endurheimta disksnei�at�fluna"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Hva�a disksnei� vilt �� nota sem r�tardisksnei�"
-
-#: ../../install_interactive.pm_.c:114
-#, fuzzy
-msgid "Choose the sizes"
-msgstr "Veldu n�ja st�r�"
-
-#: ../../install_interactive.pm_.c:115
-#, fuzzy
-msgid "Root partition size in MB: "
-msgstr "R�tardisksnei�"
-
-#: ../../install_interactive.pm_.c:116
-#, fuzzy
-msgid "Swap partition size in MB: "
-msgstr "St�r� � MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:128
-#, fuzzy
-msgid "Which partition do you want to resize?"
-msgstr "Hva�a snei�tegund viltu?"
-
-#: ../../install_interactive.pm_.c:130
-#, fuzzy
-msgid "Computing Windows filesystem bounds"
-msgstr "Reikna takmarkanir FAT skr�arkerfis..."
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"A�V�RUN\n"
-"\n"
-"DrakX �arf n�na a� endurgera Windows snei�ina. Athugi�: �etta getur haft "
-"alvarlegar\n"
-"aflei�ingar � f�r me� s�r. Ef �� ert ekki b�in(n) a� �v�, �� �ttir �� fyrst "
-"a�\n"
-"keyra scandisk (og jafnvel l�ka defrag) � �essa snei� og taka s��an afrit "
-"af\n"
-"g�gnunum ��num.\n"
-"Sl��u � '� lagi' til a� halda �fram."
-
-#: ../../install_interactive.pm_.c:147
-#, fuzzy
-msgid "Which size do you want to keep for windows on"
-msgstr "Hva�a geira viltu f�ra g�gn til?"
-
-#: ../../install_interactive.pm_.c:148
-#, fuzzy, c-format
-msgid "partition %s"
-msgstr "R�tardisksnei�"
-
-#      ******************************************
-#      *****   Byrja�i h�rna 4. jan 2000  *******
-#      ***  ATH: �a� er sumt eftir fyrir ofan ***
-#      ******************************************
-#
-#: ../../install_interactive.pm_.c:155
-#, fuzzy, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Sj�lfvirk endurst�kkun br�st"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:182
-#, fuzzy, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "�ll g�gn � �essari disksnei� tapast"
-
-#: ../../install_interactive.pm_.c:190
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Forsn�� disksnei� %s"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "�� hefur ekki neinar disksnei�ar"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Get ekki b�tt vi� disksnei�um"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:251
-#, fuzzy, c-format
-msgid "Partitioning failed: %s"
-msgstr "R�tardisksnei�"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Keyri upp neti�"
-
-#: ../../install_interactive.pm_.c:266
-#, fuzzy
-msgid "Bringing down the network"
-msgstr "Keyri upp neti�"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"��ekkt villa kom upp sem ekki er h�gt a� me�h�ndla.\n"
-"Haltu �fram � eigin �byrg�."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "%s tengipunktur er n� �egar til"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:458
-#, fuzzy, c-format
-msgid "Welcome to %s"
-msgstr "Velkomin(n) � t�lvu�rj�tinn"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ekkert disklingadrif a�gengilegt"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Hef skref `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Innsetningara�fer�"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Vinsamlega tilgreindu eftirfarandi"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:241
-#, fuzzy
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "�� munt geta vali� af meiri n�kv�mni � n�sta skrefi"
-
-#: ../../install_steps_gtk.pm_.c:243
-#, fuzzy
-msgid "Percentage of packages to install"
-msgstr "Veldu pakka til a� setja inn"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Val � pakkah�p"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-#, fuzzy
-msgid "Individual package selection"
-msgstr "Val � pakkah�p"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, fuzzy, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Heildarst�r�: "
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Skemmdur pakki"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "�tg�fa: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "St�r�: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:422
-#, fuzzy
-msgid "The following packages are going to be installed"
-msgstr "Eftirfarandi pakkar ver�a fjarl�g�ir"
-
-#: ../../install_steps_gtk.pm_.c:423
-#, fuzzy
-msgid "The following packages are going to be removed"
-msgstr "Eftirfarandi pakkar ver�a fjarl�g�ir"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Innsetning"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Vista � diskling"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Val � pakkah�p"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Fjarl�gja"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Veldu pakkana sem �� vilt setja inn"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Set inn"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "��tla"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "T�mi eftir "
-
-#: ../../install_steps_gtk.pm_.c:528
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Undirb� innsetningu"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakkar"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Set inn pakka %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-#, fuzzy
-msgid "Accept"
-msgstr "Sam�ykkja notanda"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#, fuzzy
-msgid "Refuse"
-msgstr "Endurst�kka"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Viltu samt halda �fram?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "�a� kom upp villa vi� a� ra�a p�kkum:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-#, fuzzy
-msgid "There was an error installing packages:"
-msgstr "�a� kom upp villa vi� a� ra�a p�kkum:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Villa kom upp"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Viltu pr�fa skilgreininguna"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Lyklabor�"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Hva�a lyklabor�suppsetningu viltu?"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-#, fuzzy
-msgid "Which installation class do you want?"
-msgstr "Hverskonar innsetningara�fer� viltu?"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Install/Update"
-msgstr "Innsetning/Uppf�rsla"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Is this an install or an update?"
-msgstr "Er �etta innsetning e�a uppf�rsla?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Au�velda"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "F. snillinga"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Uppf�rsla"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Val � pakkah�p"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Hvernig m�s ertu me�?"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "M�sartengi"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-#, fuzzy
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Vi� hva�a ra�tengi er m�sin ��n tengd?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Stilli PCMCIA kort..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-#, fuzzy
-msgid "Configuring IDE"
-msgstr "Uppsetning"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "engar rei�ub�nar disksnei�ar"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Veldu tengipunktana"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, fuzzy, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"�g get ekki lesi� disksnei�at�flu ��na, h�n er of skemmd fyrir mig :-(\n"
-"�g mun reyna a� halda �fram me� �v� a� hreinsa skemmdar disksnei�ar"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake gat ekki lesi� snei�at�fluna.\n"
-"Haltu �fram � eigin �byrg�!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Engin r�tarsnei� fannst"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "R�tardisksnei�"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Hver er r�tardisksnei� (/) kerfisins?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"�� ver�ur a� r�sa t�lvuna aftur svo breytingar � snei�at�flunni taki gildi"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Veldu ��r disksnei�ar sem � a� forsn��a"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Athuga skemmdar blokkir?"
-
-#: ../../install_steps_interactive.pm_.c:462
-#, fuzzy
-msgid "Formatting partitions"
-msgstr "Forsn�� disksnei� %s"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Ekki n�gjanlegt diskminni fyrir innsetningu.  B�ttu vi� �a�"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Leita a� f�anlegum p�kkum"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Leita a� p�kkum til a� uppf�ra"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Complete (%dMB)"
-msgstr "Venjulega"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Minimum (%dMB)"
-msgstr "(%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Recommended (%dMB)"
-msgstr "Au�velda"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Endurheimta fr� diskling"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Endurheimta fr� diskling"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Val � pakkah�p"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Settu t�man diskling � drif %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Vista � diskling"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Veldu pakka til a� setja inn"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Augnablik"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Undirb� innsetningu"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Set inn pakka %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Lokauppsetning"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Settu t�man diskling � drif %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Settu t�man diskling � drif %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-#, fuzzy
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"N� gefst ��r t�kif�ri til a� s�kja hugb�na� sem �tla�ur er til dulritunar.\n"
-"\n"
-"A�V�RUN:\n"
-"\n"
-"�ar sem l�g um dulritunarhugb�na� eru mj�g mismunandi eftir l�ndum og reglur "
-"sem settar\n"
-"eru af yfirv�ldum oft strangar, �� �arf notandi sl�ks hugb�na�ar a� ganga �r "
-"skugga\n"
-"um a� vi�komandi l�gsagnarumd�mi leyfi �essa gagnaflutninga, �samt "
-"var�veislu og\n"
-"notkun � sl�kum hugb�na�i.\n"
-"\n"
-"Vi�skiptavinir Mandrake og/notendur Mandrake Linux skulu �v� sj� til �ess a� "
-"�eir brj�ti ekki\n"
-"�au l�g sem sett hafa veri� � landi vi�komandi.  Ef vi�kiptavinir og/e�a "
-"notendur\n"
-"vir�a ekki �essi l�g �� mega �eir b�ast vi� �eim refsia�ger�um sem sl�kar "
-"athafnir\n"
-"hafa � f�r me� s�r.\n"
-"\n"
-"Hvorki Mandrakesoft n� framlei�slua�ilar e�a dreifingara�ilar �eirra bera "
-"�byrg� �\n"
-"s�rst�kum, �beinum e�a beinum, ska�a (�.m.t. en ekki takmarka� af,\n"
-"hagna�artapi, vi�skiptabanni e�a truflun, gagnatapi og\n"
-"��ru fj�rhagslegu tapi, ska�ab�tum e�a ��rum b�tum sem fyrirskipa� er af "
-"d�mst�li\n"
-"a� skuli borgast) s�kum notkunar, var�veislu, e�a flutnings\n"
-"af sl�kum hugb�na�i, sem vi�skiptavinur og/e�a notandi haf�i a�gang a� "
-"eftir\n"
-"a� hafa sam�ykkt �ennan samning..\n"
-"\n"
-"�essi samningur fellur undir og skal vera t�lka�ur af l�gum Frakklands nema\n"
-"�ar sem krafist er notkun laga vi�komandi yfirvalda. \n"
-"�essi samningur inniheldur hinsvegar ekki hverskonar l�g sem bj��a upp � "
-"�rekstra, \n"
-"undirst��uatri�i e�a laga�kv��i sem m�la � m�ti. Fr�nsk l�g\n"
-"skulu � �eim tilfellum gilda fram yfir l�g vi�komandi lands.\n"
-"\n"
-"Frekari uppl�singar um �ennan samning f�st hj� \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena, California, 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Hef samband vi� v�lina til a� s�kja lista yfir f�anlega pakka"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Veldu spegilv�lina �a�an sem � a� s�kja pakkanna"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Hef samband vi� v�lina til a� s�kja lista yfir f�anlega pakka"
-
-#: ../../install_steps_interactive.pm_.c:967
-#, fuzzy
-msgid "Which is your timezone?"
-msgstr "� hva�a t�masv��i ertu?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Veltu stilla t�lvuklukkuna � GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS �j�nn"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-#, fuzzy
-msgid "Remote CUPS server"
-msgstr "Fjartengd prentr��"
-
-#: ../../install_steps_interactive.pm_.c:1015
-#, fuzzy
-msgid "No printer"
-msgstr "Sta�bundinn prentari"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Er kannski eitt enn � v�linni?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044
-#, fuzzy
-msgid "Mouse"
-msgstr "USB m�s"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Prentari"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Nota NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Sta�bundinn prentari"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "�kve�a r�tarlykilor�"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Ekkert lykilor�"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "�etta lykilor� er of einfalt (ver�ur a� vera minnst %d stafa langt)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Au�kenning"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Au�kenning"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "net�j�nn"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Au�kenning NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS l�n"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS �j�nn"
-
-#: ../../install_steps_interactive.pm_.c:1171
-#, fuzzy
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"S�rsm��a�ur r�sidisklingur gerir ��r kleyft a� r�sa Linux �n �ess a� nota "
-"r�sistj�ra\n"
-" eins og LILO. �etta kemur a� gagni ef �� vilt ekki setja upp LILO � v�linni "
-"e�a ef\n"
-" anna� st�rikerfi hefur fjarl�gt LILO e�a LILO virkar ekki me� ��num "
-"v�lb�na�arstillingum.\n"
-" R�sidiskling m� einnig nota me� Mandrake Linux 'rescue' disklingnum svo "
-"h�gt s� a� bjarja\n"
-" v�linni ef alvarleg vandam�l koma upp.\n"
-"Viltu b�a til r�sidiskling fyrir v�lina ��na?"
-
-#: ../../install_steps_interactive.pm_.c:1187
-#, fuzzy
-msgid "First floppy drive"
-msgstr "Fyrsta drif"
-
-#: ../../install_steps_interactive.pm_.c:1188
-#, fuzzy
-msgid "Second floppy drive"
-msgstr "Anna� drif"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Sleppa"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, fuzzy, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"S�rsm��a�ur r�sidisklingur gerir ��r kleyft a� r�sa Linux �n �ess a� nota "
-"r�sistj�ra\n"
-" eins og LILO. �etta kemur a� gagni ef �� vilt ekki setja upp LILO � v�linni "
-"e�a ef\n"
-" anna� st�rikerfi hefur fjarl�gt LILO e�a LILO virkar ekki me� ��num "
-"v�lb�na�arstillingum.\n"
-" R�sidiskling m� einnig nota me� Mandrake Linux 'rescue' disklingnum svo "
-"h�gt s� a� bjarja\n"
-" v�linni ef alvarleg vandam�l koma upp.\n"
-"Viltu b�a til r�sidiskling fyrir v�lina ��na?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Ekkert disklingadrif til sta�ar"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Veldu disklingadrifi� sem �� vilt nota til a� gera r�sidisk"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Settu t�man diskling � drif %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "B� til r�sidiskling..."
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Set upp r�sistj�rann..."
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-#, fuzzy
-msgid "Do you want to use aboot?"
-msgstr "Viltu nota SILO?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Setja inn r�sihla�ara"
-
-#: ../../install_steps_interactive.pm_.c:1259
-#, fuzzy
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Innsetning LILO br�st s�kum eftirfarandi villu:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, fuzzy, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Settu t�man diskling � drif %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-#, fuzzy
-msgid "Creating auto install floppy"
-msgstr "Undirb� innsetningu"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Sum skref eru enn�� eftir.\n"
-"\n"
-"Viltu virkilega h�tta n�na?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Til hamingju! Innsetningu er loki�.\n"
-"Taktu disklinginn e�a geisladiskinn �r drifinu og sl��u � ENTER.\n"
-"\n"
-"\n"
-"� http://www.linux-mandrake.com/en/82errata.php3 m� finna vi�b�tur og/e�a "
-"lagf�ringar\n"
-"� g�llum sem g�tu veri� til sta�ar � �essari �tg�fu af Mandrake Linux\n"
-"\n"
-"\n"
-"Frekari uppl�singar um hvernig � a� stilla v�lina eftir innsetninguna er a�\n"
-"finna � vi�eigandi kafla � Official Mandrake Linux User's Guide b�kinni."
-
-#: ../../install_steps_interactive.pm_.c:1354
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "Undirb� innsetningu"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-#, fuzzy
-msgid "Automated"
-msgstr "Sj�lfvirkt IP"
-
-#: ../../install_steps_interactive.pm_.c:1361
-#, fuzzy
-msgid "Replay"
-msgstr "Endurhla�a"
-
-#: ../../install_steps_interactive.pm_.c:1364
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Val � pakkah�p"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux innsetning %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> milli hluta   |   <Bilsl�> velur   |   <F12> n�sti skj�r "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Veldu a�ger�"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Augnablik..."
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Uppl�singar"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Opna tr�"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Loka tr�"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Sl�m hugmynd, reyndu aftur\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "�itt val? (sj�lfgefi� %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "�itt val? (sj�lfgefi� %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "R�tardisksnei�"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Viltu nota SILO?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "�itt val? (sj�lfgefi� %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "T�kkneskt (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "��skt"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Sp�nskt"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finnskt"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Franskt"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norkst"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "P�lskt"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "R�ssneskt"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "S�nskt"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Breskt lyklabor�"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Bandar�skt lyklabor�"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "�kra�nkst"
-
-#: ../../keyboard.pm_.c:189
-#, fuzzy
-msgid "Armenian (old)"
-msgstr "Armen�skt"
-
-#: ../../keyboard.pm_.c:190
-#, fuzzy
-msgid "Armenian (typewriter)"
-msgstr "Armen�skt (hlj��fr��ilegt)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armen�skt (hlj��fr��ilegt)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belg�skt"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armen�skt (hlj��fr��ilegt)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "B�lgarskt"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasil�skt"
-
-#: ../../keyboard.pm_.c:202
-#, fuzzy
-msgid "Belarusian"
-msgstr "B�lgarskt"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Svissneskt (��sk uppsetn.)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Svissneskt (fr�nsk uppsetn.)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "T�kkneskt (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danskt"
-
-#: ../../keyboard.pm_.c:210
-#, fuzzy
-msgid "Dvorak (US)"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:211
-#, fuzzy
-msgid "Dvorak (Norwegian)"
-msgstr "Norkst"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Eistlenskt"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georg�skt (\"R�ssneskt\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georg�skt (\"Lat�nu\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Gr�skt"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungverskt"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "�srael�skt"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "�srael�skt (hlj��fr.)"
-
-#: ../../keyboard.pm_.c:224
-#, fuzzy
-msgid "Iranian"
-msgstr "�kra�nkst"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "�slenskt"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "�talskt"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Breskt lyklabor�"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Su�ur amer�skt"
-
-#: ../../keyboard.pm_.c:233
-#, fuzzy
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lith�en�skt AZERTY"
-
-#: ../../keyboard.pm_.c:235
-#, fuzzy
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lith�en�skt AZERTY"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lith�en�skt \"t�lur��\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lith�en�skt \"hlj��fr��ilegt\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Uppl�singar"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Hollenskt"
-
-#: ../../keyboard.pm_.c:242
-#, fuzzy
-msgid "Polish (qwerty layout)"
-msgstr "Svissneskt (��sk uppsetn.)"
-
-#: ../../keyboard.pm_.c:243
-#, fuzzy
-msgid "Polish (qwertz layout)"
-msgstr "Svissneskt (��sk uppsetn.)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Port�g�skt"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanad�skt (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "R�ssneskt (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "R�ssneskt (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "R�ssneskt (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Sl�venskt"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Sl�vak�skt (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Sl�vak�skt (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "J�goslavneskt (Lat�nu upps.)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tafla"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Th�lenskt lyklabor�"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Th�lenskt lyklabor�"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tyrkneskt (hef�bundi� \"F\" m�del)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tyrkneskt (n�t�ma \"Q\" m�del)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "�kra�nkst"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Bandar�skt (al�j��legt)"
-
-#: ../../keyboard.pm_.c:269
-#, fuzzy
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Lith�en�skt \"t�lur��\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "J�goslavneskt (Lat�nu upps.)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-#, fuzzy
-msgid "Sun - Mouse"
-msgstr "USB m�s"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-#, fuzzy
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Almenn m�s"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr ""
-
-#: ../../mouse.pm_.c:46
-#, fuzzy
-msgid "Wheel"
-msgstr "stig"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "ra�tengd"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Almenn �riggja hnappa m�s"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech m�s (ra�tengd, g�mul C7 tegund)"
-
-#: ../../mouse.pm_.c:66
-#, fuzzy
-msgid "busmouse"
-msgstr "Engin m�s"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:73
-#, fuzzy
-msgid "none"
-msgstr "B�i�"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Engin m�s"
-
-#: ../../mouse.pm_.c:499
-#, fuzzy
-msgid "Please test the mouse"
-msgstr "Hvernig m�s ertu me�?"
-
-#: ../../mouse.pm_.c:500
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Hvernig m�s ertu me�?"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-#, fuzzy
-msgid "Finish"
-msgstr "Finnskt"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Er �etta r�tt?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-#, fuzzy
-msgid "Connect to the Internet"
-msgstr "Nafn tengingar"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:37
-#, fuzzy
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Hva�a snei�tegund viltu?"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-#, fuzzy
-msgid "Choose the network interface"
-msgstr "Veldu n�ja st�r�"
-
-#: ../../network/ethernet.pm_.c:93
-#, fuzzy
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Vi� hva�a ra�tengi er m�sin ��n tengd?"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ekkert netkort fannst"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Stilli sta�arnetstenginu"
-
-#: ../../network/ethernet.pm_.c:203
-#, fuzzy
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Sl��u inn heiti v�larinnar.  V�larheiti� �arf a� vera fullt \n"
-"heiti, t.d. odinn.grimsey.is  �� m�tt l�ka sl� inn IP \n"
-"vistfang g�ttarinnar ef �� veist hva� �a� vistfang er.\n"
-"G�ttin gefur ��r a�gang �t �r sta�arnetinu (t.d. � Interneti�)."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-#, fuzzy
-msgid "Host name"
-msgstr "V�larheiti:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Netstillingar"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "F. snillinga"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "What kind is your ISDN connection?"
-msgstr "Vi� hva�a ra�tengi er m�sin ��n tengd?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Les uppsetningarskr�"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Les uppsetningarskr�"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-#, fuzzy
-msgid "ISDN Configuration"
-msgstr "Uppsetning"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Pr�funar skilgreining"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-#, fuzzy
-msgid "Which protocol do you want to use ?"
-msgstr "Hva�a snei�tegund viltu?"
-
-#: ../../network/isdn.pm_.c:199
-#, fuzzy
-msgid "What kind of card do you have?"
-msgstr "Hvernig prentara ertu me�?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-#, fuzzy
-msgid "ISA / PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-#, fuzzy
-msgid "PCI"
-msgstr "PCMCIA"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-#, fuzzy
-msgid "Continue"
-msgstr "Halda samt �fram?"
-
-#: ../../network/isdn.pm_.c:216
-#, fuzzy
-msgid "Which is your ISDN card ?"
-msgstr "� hva�a t�masv��i ertu?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-#, fuzzy
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Hva�a ra�tengi er m�taldi� tengt vi�?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Innhringistillingar"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nafn tengingar"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-#, fuzzy
-msgid "Phone number"
-msgstr "S�man�mer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Notendanafn"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Me� skriftu"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Me� skj�hermi"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nafn l�ns"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "A�al nafnami�lari"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Vara nafnami�lari"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Stilla nettengingu"
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Hva�a disk viltu f�ra til?"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Nafn tengingar"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Hva�a disk viltu f�ra til?"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Nafn tengingar"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Stilla nettengingu"
-
-#: ../../network/netconnect.pm_.c:50
-#, fuzzy
-msgid "Internet connection & configuration"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Stilla nettengingu"
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr "Stilla nettengingu"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Netstillingar"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Veldu n�ja st�r�"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Leita a� t�kjum..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Stilla nettengingu"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "%s tengipunktur er n� �egar til"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "Cable connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, fuzzy
-msgid "LAN connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Veldu forriti� sem �� vilt nota"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Do you want to start the connection at boot?"
-msgstr "Viltu nota aboot?"
-
-#: ../../network/netconnect.pm_.c:247
-#, fuzzy
-msgid "Network configuration"
-msgstr "Netstillingar"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Viltu pr�fa skilgreininguna"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Sl��u inn IP uppsetningu �essarar v�lar. Hver f�rsla\n"
-"� a� vera IP tala ritu� me� punkt � milli.\n"
-"(d�mi 192.168.1.13)"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Stilli nett�ki %s"
-
-#: ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "XFree86 �j�nn: %s\n"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-#, fuzzy
-msgid "IP address"
-msgstr "IP vistfang:"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-#, fuzzy
-msgid "Netmask"
-msgstr "Nets�a:"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Sj�lfvirkt IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP vistfang � a� vera � sni�inu 192.168.1.10"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Sl��u inn heiti v�larinnar.  V�larheiti� �arf a� vera fullt \n"
-"heiti, t.d. odinn.grimsey.is  �� m�tt l�ka sl� inn IP \n"
-"vistfang g�ttarinnar ef �� veist hva� �a� vistfang er.\n"
-"G�ttin gefur ��r a�gang �t �r sta�arnetinu (t.d. � Interneti�)."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Nafnami�lari"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "G�tt (t�ki�)"
-
-#: ../../network/network.pm_.c:381
-#, fuzzy
-msgid "Proxies configuration"
-msgstr "Lokauppsetning"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP sel:"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP Sel:"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Sel � a� vera http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Sel � a� vera ftp://..."
-
-#: ../../network/tools.pm_.c:39
-#, fuzzy
-msgid "Internet configuration"
-msgstr "Sel stillingar"
-
-#: ../../network/tools.pm_.c:40
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Viltu pr�fa skilgreininguna"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Stilla nettengingu"
-
-#: ../../network/tools.pm_.c:50
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Hva�a disk viltu f�ra til?"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Nafn tengingar"
-
-#: ../../network/tools.pm_.c:76
-#, fuzzy
-msgid "Connection Configuration"
-msgstr "Sel stillingar"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr ""
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-#, fuzzy
-msgid "Provider phone number"
-msgstr "S�man�mer"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "Stillingar � prentara"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "Stillingar � prentara"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Veldu lyklabor�"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-#, fuzzy
-msgid "Dialing mode"
-msgstr "Hringja inn me� m�taldi"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Nafn tengingar"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Nafn tengingar"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-#, fuzzy
-msgid "Account Login (user name)"
-msgstr "Tengipunktur"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-#, fuzzy
-msgid "Account Password"
-msgstr "Lykilor�"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "t�kst ekki a� tengja: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"�a� er gat � snei�at�flunni �inni sem ekki er h�gt a� nota.\n"
-"Eina lausnins er a� f�ra a�alsnei�ar svo a� gati� ver�i vi� hli�ina � "
-"vi�b�tasnei�"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Villa vi� lestur �r skr�nni %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Skemmd afritsskr�"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Villa vi� a� skrifa � skr�na %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr ""
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr ""
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:27
-#, fuzzy
-msgid "nice"
-msgstr "t�ki"
-
-#: ../../pkgs.pm_.c:28
-#, fuzzy
-msgid "maybe"
-msgstr "R�sikjarna"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Sta�bundinn prentari"
-
-#: ../../printer.pm_.c:48
-#, fuzzy
-msgid "Remote printer"
-msgstr "Vi�f�ng fyrir fjartengda lpd prentara"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Fjartengd prentr��"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Fjartengdur"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Vi�f�ng NetWare prentara"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Prent�j�nn"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Prentt�ki:"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Sta�bundinn prentari"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Vi�f�ng fyrir fjartengda lpd prentara"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Villa vi� a� skrifa � skr�na %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(eining %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Vistfang SMB �j�ns"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Sj�lfgefi�)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hvernig er �essi prentari tengdur?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Uppsetning"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Fjartengd prentr��"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP vistfang � a� vera � sni�inu 192.168.1.10"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "Vistfang SMB �j�ns"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-#, fuzzy
-msgid "Port"
-msgstr "L�legt"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Lokauppsetning"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Leita a� t�kjum..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Pr�fa tengi"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Sta�bundinn prentari"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Sta�bundinn prentari"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Vi�f�ng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Vi�f�ng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Vi�f�ng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s tengipunktur er n� �egar til"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Sta�bundinn prentari"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Hva�a ra�tengi er m�taldi� tengt vi�?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Prentt�ki:"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Uppsetning"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Set inn pakka %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Set inn pakka %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Vi�f�ng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Til �ess a� nota fjartengda lpd prentr�� �arftu a� gefa\n"
-"upp v�larheiti prent�j�nsins og prentr��ina � �eim sem\n"
-"�� vilt senda prentverkin �."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Prent�j�nn:"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Vi�f�ng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Prent�j�nn:"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Prent�j�nn:"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB/Windows 9x/NT prentvi�f�ng"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Til �ess a� geta prenta� � SMB prentara �arftu a� gefa\n"
-"upp SMB v�larheiti �j�nsins (sem er ekki endilega �a�\n"
-"sama og TCP/IP v�larheiti� en oftast) og jafnvel IP vistfang prent�j�nsins\n"
-"�samt samn�tingarheiti prentarans, notandaheiti, lykilor�i og\n"
-"vinnuh�psuppl�singum fyrir prentarann."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Heiti SMB �j�ns"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "Vistfang SMB �j�ns"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Samn�tingarheiti"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Vinnuh�pur"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Vi�f�ng NetWare prentara"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Til �ess a� geta prenta� � NetWare prentara �arftu a� gefa upp NetWare\n"
-"v�larheiti �j�nsins (sem er ekki endilega �a� sama og TCP/IP v�larheiti�)\n"
-"�samt heiti prentara�ar, notandaheiti og lykilor�i fyrir\n"
-"prentarann."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Prent�j�nn"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Heiti prentra�ar"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Vi�f�ng sta�bundinna prentara"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Stillingar � prentara"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Stillingar � prentara"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-#, fuzzy
-msgid "Printer Device URI"
-msgstr "Prentt�ki:"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-#, fuzzy
-msgid "Name of printer"
-msgstr "Sta�bundinn prentari"
-
-#: ../../printerdrake.pm_.c:1006
-#, fuzzy
-msgid "Description"
-msgstr "Stilla handvirkt"
-
-#: ../../printerdrake.pm_.c:1007
-#, fuzzy
-msgid "Location"
-msgstr "Uppl�singar"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Vi�f�ng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Er �etta r�tt?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Vi�f�ng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Veldu prenttengingu"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Hvernig prentara ertu me�?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Sel stillingar"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Sel stillingar"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Viltu prenta �t prufubla�s��u?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Pr�fa tengi"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "J�, prenta b��ar prufus��ur"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Prentari"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Forritun"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Prenta �t prufubla�s��u(r)..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Prenta �t prufubla�s��u(r)..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Prenta �t prufubla�s��u(r)..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Prenta �t prufubla�s��u(r)..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Sta�bundinn prentari"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "USB m�s"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Keyri upp neti�"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Keyri upp neti�"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Stillingar � prentara"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Sel stillingar"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Sta�bundinn prentari"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Stilla prentara"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Stilla nettengingu"
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Stilla nettengingu"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Skj�r ekki skilgreindur"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Stilli sta�arnetstenginu"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Hva�a snei�tegund viltu?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "H�tt"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Taugaveikla�"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Hva�a snei�tegund viltu?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Veldu prenttengingu"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hva�a snei�tegund viltu?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Setja upp prentara"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Set inn pakka %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Stillingar � prentara"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Setja upp prentara"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Viltu setja upp prentara?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Prentari"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Stilla nettengingu"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Venjulega"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Viltu pr�fa skilgreininguna"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Sel stillingar"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Viltu pr�fa skilgreininguna"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Veldu prenttengingu"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Veldu prenttengingu"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Prenta �t prufubla�s��u(r)..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Viltu pr�fa skilgreininguna"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Vi�f�ng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Vi�f�ng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Sta�bundinn prentari"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Viltu pr�fa skilgreininguna"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Vi�f�ng fyrir fjartengda lpd prentara"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Lokauppsetning"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "L�legt"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Sel � a� vera http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Sel � a� vera ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Belg�skt"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Lykilor�"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Ekkert lykilor�"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Mismunandi lykilor�"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:111
-#, fuzzy, c-format
-msgid "Can't write file %s"
-msgstr "Villa vi� a� skrifa � skr�na %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ekki n�gu margar disksnei�ar fyrir RAID %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Veldu ��r �j�nustur sem skal sj�lfkrafa keyra vi� r�singu"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Prentari"
-
-#: ../../services.pm_.c:123
-#, fuzzy
-msgid "Internet"
-msgstr "Endursn��..."
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Mouse Systems"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Vi�f�ng fyrir fjartengda lpd prentara"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Prent�j�nn"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "t�ki"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "A�v�run"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "B�ta aftan vi�"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "R�t"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "takmarka"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Geiri"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Pr�funar skilgreining"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Endursn��..."
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Margmi�lun"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-#, fuzzy
-msgid "Development"
-msgstr "Forritun"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Nafn tengingar"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Endursn��..."
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Heiti SMB �j�ns"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-#, fuzzy
-msgid "Games"
-msgstr "B�i�"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "snillingur"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Set inn pakka %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"�g get ekki lesi� disksnei�at�flu ��na, h�n er of skemmd fyrir mig :-(\n"
-"�g mun reyna a� halda �fram me� �v� a� hreinsa skemmdar disksnei�ar"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Villa"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Lokauppsetning"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Lokauppsetning"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Til hamingju!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Innsetning"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "B�ta vi� notanda"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Forsn�� disksnei� %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Skemmd afritsskr�"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Skemmd afritsskr�"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Skemmd afritsskr�"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Val � pakkah�p"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Fjartengd prentr��"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Hvernig m�s ertu me�?"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Reyndu aftur"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Hvernig m�s ertu me�?"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "�kve�a r�tarlykilor�"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Hva�a lyklabor�suppsetningu viltu?"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Smelltu � disksnei�"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Veldu pakkana sem �� vilt setja inn"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Hvernig m�s ertu me�?"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Skemmd afritsskr�"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Geiri"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Notandanafn:"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Hvernig m�s ertu me�?"
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Nota f�nstillingar � h�r�um disk(um)"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Augnablik"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "stig"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "stig"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Stillingar kjarnaeininga:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Veldu pakkana sem �� vilt setja inn"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Veldu pakkana sem �� vilt setja inn"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Setja upp skr�arkerfi"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Uppl�singar"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Hva�a ra�tengi er m�taldi� tengt vi�?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Netstillingar"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Hvernig m�s ertu me�?"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Endurheimta fr� skr�"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Anna�"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Setja kerfi� inn"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Endurheimta fr� skr�"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Endurheimta fr� skr�"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "S�rlaga�a"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "Hj�lp"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "net�j�nn"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Endurst�kka"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Texta"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Veldu pakka til a� setja inn"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Skemmd afritsskr�"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Skemmd afritsskr�"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Skemmd afritsskr�"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Vista � skr�"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Hvernig m�s ertu me�?"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Veldu pakkana sem �� vilt setja inn"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Netstillingar"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Netstillingar"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Innsetning %s br�st s�kum eftirfarandi villu:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s fannst ekki"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "B�i�"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Forsn��"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Undirb� innsetningu"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "takmarka"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Forsn��a disksnei�ar"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Fjarl�gji RPM pakkana"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Uppsetning"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Tengipunktur"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Veldu ��r disksnei�ar sem � a� forsn��a"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "t�ki"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Prentari"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Setja kerfi� inn"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Velji� skr�"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Vi�f�ng fyrir fjartengda lpd prentara"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Innsetning"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "H�tta innsetningu"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-#, fuzzy
-msgid "Internet Connection Sharing"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-#, fuzzy
-msgid "disable"
-msgstr "Tafla"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "reconfigure"
-msgstr "Stilla X"
-
-#: ../../standalone/drakgw_.c:146
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Leita a� t�kjum..."
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "enable"
-msgstr "Tafla"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Endursn��..."
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Skj�r ekki skilgreindur"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Lokauppsetning"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Sel stillingar"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "Vistfang SMB �j�ns"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-#, fuzzy
-msgid "Firewalling configuration detected!"
-msgstr "Les uppsetningarskr�"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:340
-#, fuzzy
-msgid "Configuring..."
-msgstr "Uppsetning"
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:378
-#, fuzzy, c-format
-msgid "Problems installing package %s"
-msgstr "Set inn pakka %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netstillingar"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-#, fuzzy
-msgid "Profile: "
-msgstr "t�kst ekki a� tengja: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-#, fuzzy
-msgid "Hostname: "
-msgstr "V�larheiti:"
-
-#: ../../standalone/draknet_.c:168
-#, fuzzy
-msgid "Internet access"
-msgstr "Endursn��..."
-
-#: ../../standalone/draknet_.c:181
-#, fuzzy
-msgid "Type:"
-msgstr "Tegund: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "G�tt:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-#, fuzzy
-msgid "Interface:"
-msgstr "Endursn��..."
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Setja upp prentara"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Driver"
-msgstr "Sem �j�n"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Interface"
-msgstr "Endursn��..."
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr ""
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Stilla nettengingu"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Pr�funar skilgreining"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Nafn tengingar"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Not connected"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Virk"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Virk"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/draknet_.c:597
-#, fuzzy
-msgid "Connection type: "
-msgstr "Nafn tengingar"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "G�tt"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Stilli �ryggis�rep"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Nafn tengingar"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Veldu forriti� sem �� vilt nota"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanad�skt (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "�slenskt"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "ra�tengd"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-#, fuzzy
-msgid "Please, choose your keyboard layout."
-msgstr "Hva�a lyklabor�suppsetningu viltu?"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "Breyta upplausn"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-#, fuzzy
-msgid "/File/_New"
-msgstr "Skr�r:\n"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-#, fuzzy
-msgid "/File/-"
-msgstr "Skr�r:\n"
-
-#: ../../standalone/logdrake_.c:108
-#, fuzzy
-msgid "/_Options"
-msgstr "Uppl�singar"
-
-#: ../../standalone/logdrake_.c:109
-#, fuzzy
-msgid "/Options/Test"
-msgstr "Uppl�singar"
-
-#: ../../standalone/logdrake_.c:110
-#, fuzzy
-msgid "/_Help"
-msgstr "Hj�lp"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "USB m�s"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Pr�fa tengi"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-#, fuzzy
-msgid "search"
-msgstr "Leita"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "forsn��"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-#, fuzzy
-msgid "Choose file"
-msgstr "Veldu a�ger�"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-#, fuzzy
-msgid "Content of the file"
-msgstr "Nafn tengingar"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, fuzzy, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Undirb� innsetningu"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "skuggi"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "Endursn��..."
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "forsn��"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-#, fuzzy
-msgid "Save as.."
-msgstr "net�j�nn"
-
-#: ../../standalone/mousedrake_.c:49
-#, fuzzy
-msgid "Please, choose the type of your mouse."
-msgstr "Hvernig m�s ertu me�?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ekkert serial_usb fannst\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Herma eftir �ri�ja hnapp?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Veldu skj�kort"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "R�sit�ki"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Les uppsetningarskr�"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Les uppsetningarskr�"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Veldu tungum�l"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Veldu innsetningarflokk"
-
-#: ../../steps.pm_.c:16
-#, fuzzy
-msgid "Hard drive detection"
-msgstr "Nota f�nstillingar � h�r�um disk(um)"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Tilgreindu m�s"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Veldu lyklabor�"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Setja upp skr�arkerfi"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Forsn��a disksnei�ar"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Veldu pakka til a� setja inn"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Setja kerfi� inn"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "B�ta vi� notanda"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Stilla nettengingu"
-
-#: ../../steps.pm_.c:28
-#, fuzzy
-msgid "Configure services"
-msgstr "Setja upp prentara"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Setja inn r�sihla�ara"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "B�a til r�sidiskling"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Stilla X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Setja kerfi� inn"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "H�tta innsetningu"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Villa vi� a� opna %s til skriftar: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Netstillingar"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Undirb� innsetningu"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Vi�f�ng NetWare prentara"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office"
-msgstr "t�ki"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Uppl�singar"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Uppl�singar"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Uppl�singar"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Margmi�lun"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Viltu pr�fa skilgreininguna"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Margmi�lun"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Lei�beiningar"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Sel stillingar"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Margmi�lun"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Uppsetning"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Uppl�singar"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "net�j�nn"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Vi�f�ng NetWare prentara"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Lei�beiningar"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Margmi�lun"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Endursn��..."
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Margmi�lun"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Uppl�singar"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Tengipunktur"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "B�i�"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Veldu n�ja st�r�"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Vi�f�ng fyrir fjartengda lpd prentara"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "�� getur n�na gefi� upp vi�f�ng fyrir %s eininguna."
-
-#~ msgid "Low"
-#~ msgstr "L�gt"
-
-#~ msgid "Medium"
-#~ msgstr "Mi�lungs"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-
-#~ msgid "mount failed"
-#~ msgstr "t�kst ekki a� tengja"
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Margmi�lun"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "F. snillinga"
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "H�rna velur �� t�masv��i� sem gildir �ar sem �� b�r�.\n"
-#~ "\n"
-#~ "\n"
-#~ "Linux notar GMT e�a \"Greenwich Mean Time\" og breytir �eim t�ma\n"
-#~ "s��an � sta�art�ma samkv�mt �v� t�masv��i sem �� velur."
-
-#, fuzzy
-#~ msgid "Connect to Internet"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Hva�a disk viltu f�ra til?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Veldu pakkana sem �� vilt setja inn"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Uppl�singar"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Uppl�singar"
-
-#, fuzzy
-#~ msgid "authentification"
-#~ msgstr "Au�kenning"
-
-# ## skrytid
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Sj�lfvirk tenging aukat�kja"
-
-#~ msgid "Active"
-#~ msgstr "Virk"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Nei"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Prentari af ger�inni \"%s\" fannst � "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Sta�bundi� prentt�ki"
-
-#, fuzzy
-#~ msgid "Printer Device"
-#~ msgstr "Prentt�ki:"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Fjartengd prentr��"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Fjartengd prentr��"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Veldu �� st�r� sem �� vilt setja inn"
-
-#~ msgid "Total size: "
-#~ msgstr "Heildarst�r�: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Vinsamlegast hinkri�, "
-
-#~ msgid "Total time "
-#~ msgstr "Heildar t�mi "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Nota �� X uppsetningu sem er til?"
-
-#, fuzzy
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Vi� hva�a t�ki er prentarinn �inn tengdur\n"
-#~ " (Athuga�u a� /dev/lp0 er �a� sama og LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "Hva�a disk viltu f�ra til?"
-
-#~ msgid "New"
-#~ msgstr "N�"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Fjarl�gja"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Smelltu � disksnei�"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "�lj�st (%s), vertu n�kv�mari\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (sj�lfgefi� %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "�itt val? (sj�lfgefi� %s  sl��u inn  `none' fyrir engan) "
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Ef um algengar a�st��ur er a� r��a �� er r�tt svar \"/dev/hda\"\n"
-#~ "(a�al diskurinn � a�al IDE r�sinni)."
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Viltu pr�fa skilgreininguna"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Viltu pr�fa skilgreininguna"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Viltu pr�fa skilgreininguna"
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "H�rna eru n�verandi stillingar LILO .\n"
-#~ "�� getur b�tt vi� fleirum e�a breytt �essum."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Veldu n�ja st�r�"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Hvernig m�s ertu me�?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Veldu tungum�l til a� nota vi� innsetningu og kerfisnotkun."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Veldu sni� sem passar vi� lyklabor�i� �itt fr� listanum a� ofan"
-
-#, fuzzy
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Eftir �skum: Ef �� hefur �� nokkra reynslu me�iar with Linux, you "
-#~ "will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\".\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "H�rna getur�u stillt innhringitengingu. Ef �� ert ekki viss um hva� �� "
-#~ "�arft,\n"
-#~ "haf�u �� samband vi� �j�nustuveituna til a� f� ��r uppl�singar."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Sl��u inn:\n"
-#~ "\n"
-#~ "  - IP vistfang: Ef �� veist ekki hva� �a� er, spur�u �� kerfisstj�ra e�a "
-#~ "fulltr�a hj� �j�nustuveitu.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Nets�a: \"255.255.255.0\" er mj�g algeng s�a. Ef �� ert ekki viss "
-#~ "hva�a\n"
-#~ "s�u skal nota, spur�u �� kerfisstj�ra e�a fulltr�a �j�nustuveitu.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Sj�lfvirkt vistfang: Ef �� ert � neti sem notar bootp e�a dhcp "
-#~ "reglurnar, veldu \n"
-#~ "�� �ennan kost. � sl�kum tilfellum �arf ekki a� gefa upp neitt \"IP "
-#~ "vistfang\".  Eins \n"
-#~ "og me� a�rar stillingar, �� v�ri ekki sl�m hugmynd a� hafa samband vi� "
-#~ "kerfisstj�ra.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Ef NIS er nota� � netinu sem �� ert �, veldu �� \"Nota NIS\". Ef �� ert "
-#~ "ekki\n"
-#~ "viss hvort �a� s� nota�, spur�u �� kerfisstj�ra netsins."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "H�rna getur�u stillt innhringitengingu. Ef �� ert ekki viss um hva� �� "
-#~ "�arft,\n"
-#~ "haf�u �� samband vi� �j�nustuveituna til a� f� ��r uppl�singar."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Ef �� notar einhverskonar sel (e. proxy), stilltu �au �� n�na. Ef �� "
-#~ "veist ekki\n"
-#~ "hvort �� �arft a� still �au, haf�u �� samband vi� kerfisstj�ra e�a "
-#~ "�j�nustuveitu."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "�� getur n�na n�� � dulritunarhugb�na� ef Internet tengingin ��n er r�tt\n"
-#~ "upp sett.  Fyrst velur �� �� spegilv�l �a�an sem �� vilt s�kja "
-#~ "hugb�na�inn\n"
-#~ "og s��an velur �� �� pakka sem �� vilt s�kja og setja inn.\n"
-#~ "\n"
-#~ "Athuga�u a� velja spegilv�l og dulritunarhugb�na� samkv�mt �v� sem l�g "
-#~ "leyfa\n"
-#~ "� �slandi e�a hvar sem �� ert n�na a� nota t�lvuna."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "H�rna b�r�u til r�tarlykilor� fyrir Mandrake Linux kerfi� (lykilor�\n"
-#~ "ofurpaursins :-). �� ver�ur a� sl� lykilor�i� inn tvisvar til a� \n"
-#~ "sta�festa �a� (svo �a� ver�i �rugglega �a� lykilor� sem �� �tlast til).\n"
-#~ "\n"
-#~ "\n"
-#~ "R�tin (root) er stj�rnandi kerfisins (kerfisstj�ri) og eini notandinn\n"
-#~ "sem breytt getur st�riskr�m.  Veldu lykilor�i� �v� vandlega.  �heimil\n"
-#~ "notkun � r�tara�gangi a� kerfinu getur or�i� mj�g ska�leg uppsetningu\n"
-#~ "og g�gnum � kerfinu �samt ��rum t�lvum sem eru tengdar vi� �essa.\n"
-#~ "Lykilor�i� �tti a� vera h�fileg blanda af b�kst�fum og t�lust�fum og\n"
-#~ "minnst 8 stafa langt.  �� �ttir *ekki* a� skrifa �a� ni�ur og �ttir\n"
-#~ "�v� ekki a� hafa �a� of langt e�a of fl�ki� �v� �� eykst h�ttan �\n"
-#~ "� �v� a� �� gleymir �v�.  �� �arft a� geta muna� hva�a lykilor�\n"
-#~ "gefur r�tara�gang til a� geta breytt uppsetningu og stillingum."
-
-# ## skrytid
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-
-# ## skrytid
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Linear: Generate linear sector addresses instead of\n"
-#~ "sector/head/cylinder addresses. Linear addresses are translated at run\n"
-#~ "time and do not depend on disk geometry. Note that boot disks may not be\n"
-#~ "portable if \"linear\" is used, because the BIOS service to determine "
-#~ "the\n"
-#~ "disk geometry does not work reliably for floppy  disks. When using\n"
-#~ "\"linear\" with large disks, /sbin/lilo may generate references to\n"
-#~ "inaccessible disk areas, because 3D sector addresses are not known\n"
-#~ "before boot time.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Compact: Tries to merge read requests for adjacent sectors into a\n"
-#~ "single read request. This drastically reduces load time and keeps the\n"
-#~ "map smaller. Using \"compact\" is especially recommended when booting "
-#~ "from\n"
-#~ "a floppy disk.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "    * <number>:  use the corresponding text mode."
-
-# ## skrytid
-#, fuzzy
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "LILO main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Linear: Generate linear sector addresses instead of\n"
-#~ "sector/head/cylinder addresses. Linear addresses are translated at run\n"
-#~ "time and do not depend on disk geometry. Note that boot disks may not be\n"
-#~ "portable if \"linear\" is used, because the BIOS service to determine "
-#~ "the\n"
-#~ "disk geometry does not work reliably for floppy  disks. When using\n"
-#~ "\"linear\" with large disks, /sbin/lilo may generate references to\n"
-#~ "inaccessible disk areas, because 3D sector addresses are not known\n"
-#~ "before boot time.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Compact: Tries to merge read requests for adjacent sectors into a\n"
-#~ "single read request. This drastically reduces load time and keeps the\n"
-#~ "map smaller. Using \"compact\" is especially recommended when booting "
-#~ "from\n"
-#~ "a floppy disk.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "    * <number>:  use the corresponding text mode."
-
-#, fuzzy
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "N� er kominn t�mi til a� stilla X, sem er undirsta�a Linux notenda- \n"
-#~ "vi�m�tsins (GUI). Til a� X virki, �� �arf a� stilla skj�korti�\n"
-#~ "og velja vi�komandi skj�.  �essi atri�i er �� oftast stillt\n"
-#~ "sj�lfkrafa �annig a� �� g�tir a�eins �urft a� sta�festa �a�\n"
-#~ "sem Mandrake Linux vill gera :)\n"
-#~ "\n"
-#~ "\n"
-#~ "�egar uppsetningu X er loki� �� ver�ur X �j�nninn r�stur (nema\n"
-#~ "�� bi�jir DrakX a� gera �a� ekki) svo �� getir sta�fest a�\n"
-#~ "stillingarnar s�u vi�unnandi. Ef �� ert ekki s�tt(ur) vi� ��r X\n"
-#~ "stillingar sem eru valdar, �� getur �� breytt �eim a� eigin vild."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Ef eitthva� kemur upp � � X, nota�u �� �essar stillingar til a� stilla\n"
-#~ "�a� aftur."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Ef �� vilt myndr�nt innstimplunarvi�m�t, veldu �� \"J�\". Ef ekki, veldu\n"
-#~ "�� \"Nei\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "T�lvan ver�ur n�na endurr�st.\n"
-#~ "\n"
-#~ "Mandrake Linux ver�ur sj�lfkrafa keyrt upp.  Ef �� vilt hinsvegar\n"
-#~ "keyra upp eitthva� anna� st�rikerfi, lestu �� lei�beiningarnar\n"
-#~ "sem fylgja."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Skrifa /etc/fstab"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Endurheimta fr� diskling"
-
-#~ msgid "Format all"
-#~ msgstr "Forsn��"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Eftir forsn��ingu allra snei�a"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "munu �ll g�gn � �essum disksnei�um tapast"
-
-#~ msgid "Reload"
-#~ msgstr "Endurhla�a"
-
-#~ msgid "Error reading file $f"
-#~ msgstr "Villa vi� lestur skr�arinnar $f"
-
-#, fuzzy
-#~ msgid "ADSL configuration"
-#~ msgstr "Uppsetning"
-
-#~ msgid "Remote queue"
-#~ msgstr "Fjartengd prentr��"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Fjartengd prentr��"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Nafn l�ns"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Sta�bundinn prentari"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Netstillingar"
-
-#, fuzzy
-#~ msgid "Profile "
-#~ msgstr "t�kst ekki a� tengja: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Sj�lfgefi�"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#, fuzzy
-#~ msgid "Adapter"
-#~ msgstr "Uppf�rsla"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "USB m�s"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "J�, prenta ASCII prufus��u"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "J�, prenta PostScript prufus��u"
-
-#~ msgid "Paper Size"
-#~ msgstr "Papp�rsst�r�"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Koma bla�s��u �t eftir�?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint rekilvalkostir"
-
-#~ msgid "Color depth options"
-#~ msgstr "Stillingar � litad�pt"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Afstalla texta (tr�ppurnar)?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Allar prentra�ir (sem taka vi� prentverkum) �urfa heiti\n"
-#~ "(oft bara lp) og m�ppu. Hva�a heiti og m�ppu viltu nota fyrir\n"
-#~ "�essa prentr��?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Allar prentra�ir (sem taka vi� prentverkum) �urfa heiti\n"
-#~ "(oft bara lp) og m�ppu. Hva�a heiti og m�ppu viltu nota fyrir\n"
-#~ "�essa prentr��?"
-
-#, fuzzy
-#~ msgid "Name of queue"
-#~ msgstr "Heiti prentra�ar:"
-
-#, fuzzy
-#~ msgid "Spool directory"
-#~ msgstr "Mappa prentra�ar:"
-
-#, fuzzy
-#~ msgid "Disable"
-#~ msgstr "Tafla"
-
-#, fuzzy
-#~ msgid "Enable"
-#~ msgstr "Tafla"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Ef �� vilt gera kerfi� �ruggara �� �ttir �� a� velja \"Nota skuggaskr�\" "
-#~ "og\n"
-#~ "\"Nota MD5 lykilor�\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Ef NIS er nota� � netinu sem �� ert �, veldu �� \"Nota NIS\". Ef �� ert "
-#~ "ekki\n"
-#~ "viss hvort �a� s� nota�, spur�u �� kerfisstj�ra netsins."
-
-#~ msgid "yellow pages"
-#~ msgstr "Gular s��ur (yp)"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Uppsetning"
-
-#, fuzzy
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Hva�a disk viltu f�ra til?"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Uppsetning"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Velji� skr�"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Uppsetning: B�ta sl�� vi�"
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "Lokauppsetning"
-
-#, fuzzy
-#~ msgid "Automatic dependencies"
-#~ msgstr "Athuga tengsli milli pakka"
-
-#, fuzzy
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Stilla X"
-
-#, fuzzy
-#~ msgid "Create a boot floppy"
-#~ msgstr "B�a til r�sidiskling"
-
-#, fuzzy
-#~ msgid "Choice"
-#~ msgstr "t�ki"
-
-#, fuzzy
-#~ msgid "gMonitor"
-#~ msgstr "Skj�r"
-
-# ## skrytid
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "  - Use hard drive optimizations: This option can improve hard disk\n"
-#~ "accesses but is only for advanced users, it can ruin your hard drive if\n"
-#~ "used incorrectly. Use it only if you know how.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Choose security level: You can choose a security level for your\n"
-#~ "system.\n"
-#~ "    Please refer to the manual for more information.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM size if needed: In some cases, Linux is unable to\n"
-#~ "correctly detect all the installed RAM on some systems. If this is the\n"
-#~ "case, specify the correct quantity. Note: a difference of 2 or 4 Mb is\n"
-#~ "normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Removable media automounting: If you would prefer not to manually\n"
-#~ "mount removable drives (CD-ROM, Floppy, Zip) by typing \"mount\" and\n"
-#~ "\"umount\", select this option. \n"
-#~ "\n"
-#~ "\n"
-#~ "  - Enable Num Lock at startup: If you want Number Lock enabled after\n"
-#~ "booting, select this option (Note: Num Lock will still not work under\n"
-#~ "X)."
-
-#, fuzzy
-#~ msgid "Internet/Network access"
-#~ msgstr "Endursn��..."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "�mislegt"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "�msar spurningar:"
-
-#, fuzzy
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Stilli �ryggis�rep"
-
-#, fuzzy
-#~ msgid "toot"
-#~ msgstr "R�t"
-
-#~ msgid "First DNS Server"
-#~ msgstr "A�al nafnami�lari"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Vara nafnami�lari"
-
-#, fuzzy
-#~ msgid "using module"
-#~ msgstr "Hringja inn me� m�taldi"
-
-#, fuzzy
-#~ msgid "Development, Database"
-#~ msgstr "Forritun"
-
-#, fuzzy
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Hverju viltu b�ta vi�?"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Reyna a� finna m�tald?"
-
-#, fuzzy
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Configure local network"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr "LAN netuppsetning er �egar til sta�ar. Hva� viltu gera?"
-
-#, fuzzy
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Uppsetning"
-
-#, fuzzy
-#~ msgid "Internet Tools"
-#~ msgstr "Sel stillingar"
-
-#, fuzzy
-#~ msgid "Development C/C++"
-#~ msgstr "Forritun"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Tilgreina t�masv��i"
-
-#, fuzzy
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Vi�f�ng NetWare prentara"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(getur ska�a� vistu� g�gn)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Kveikja � NUMLOCK vi� eftir r�singu"
-
-#, fuzzy
-#~ msgid "Confirm Password"
-#~ msgstr "Lykilor�"
-
-#~ msgid "DNS server:"
-#~ msgstr "Nafnami�lari:"
-
-#~ msgid "Gateway device:"
-#~ msgstr "G�tt (t�ki�):"
-
-#, fuzzy
-#~ msgid "default"
-#~ msgstr "Sj�lfgefi�"
-
-#, fuzzy
-#~ msgid "What is your system used for?"
-#~ msgstr "� hva�a t�masv��i ertu?"
-
-#, fuzzy
-#~ msgid "Select the size you want to install"
-#~ msgstr "Veldu �� st�r� sem �� vilt setja inn"
-
-#~ msgid "Customized"
-#~ msgstr "S�rlaga�a"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Nota skuggaskr�"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Nota MD5 lykilor�"
-
-#~ msgid "Package"
-#~ msgstr "Pakka"
-
-#~ msgid "Tree"
-#~ msgstr "Tr�"
-
-#~ msgid "Sort by"
-#~ msgstr "Ra�a eftir"
-
-#~ msgid "Category"
-#~ msgstr "Flokk"
-
-#~ msgid "Installed packages"
-#~ msgstr "Pakkar sem eru inni"
-
-#~ msgid "Available packages"
-#~ msgstr "Tilt�kir pakkar"
-
-#~ msgid "Show only leaves"
-#~ msgstr "S�na a�eins laufbl��"
-
-#~ msgid "Expand all"
-#~ msgstr "Opna allt"
-
-#~ msgid "Collapse all"
-#~ msgstr "Loka �llu"
-
-#~ msgid "Add location of packages"
-#~ msgstr "B�ta sl�� pakkanna vi�"
-
-#~ msgid "Update location"
-#~ msgstr "Uppf�rslusl��"
-
-#~ msgid "Find Package"
-#~ msgstr "Finna pakka"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Finna pakka sem inniheldur skr�"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Skipta � milli innsettra og tilt�kra"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Athuga tengsli milli pakka"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Eftirfarandi pakkar ver�a fjarl�g�ir"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Hva�a pakka ertu a� leita a�?"
-
-#~ msgid "No match"
-#~ msgstr "Ekkert fannst"
-
-#~ msgid "No more match"
-#~ msgstr "Fleira fannst ekki"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake er n�na � ``l�gminnis'' ham.\n"
-#~ "�a� ver�ur eyrt aftur til a� leyfa skr�arleit."
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Hva�a skr� ertu a� leita a�?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Hverju ertu a� leita a�?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Gef�u upp nafn (t.d. `extra', `commercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Mappa"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Ekkert geisladrif til sta�ar (ekkert � /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "Sl�� � m�ppu sem inniheldur RPM pakka"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Fyrir FTP og HTTP, �� �arftu a� gefa upp sta�setningu hdlist.\n"
-#~ "Sta�setningin ver�ur a� vera mi�u� vi� sl��ina h�r a� ofan."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Vinsamlega tilgreindu eftirfarandi"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s er n� �egar � notkun."
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Uppf�ri RPM gagnaskr�na"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Fjarl�gji nafni� %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Leita a� \"laufbl��um\"."
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "�essi leit mun taka d�l�tinn t�ma"
-
-#, fuzzy
-#~ msgid "ECI modem"
-#~ msgstr "F. snillinga"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Vi� hva�a ra�tengi er m�sin ��n tengd?"
-
-#~ msgid "Czech"
-#~ msgstr "T�kkneskt"
-
-#~ msgid "Slovakian"
-#~ msgstr "Sl�vak�skt"
-
-#, fuzzy
-#~ msgid "Reconfigure local network"
-#~ msgstr "Endurstilla netstillingar n�na"
-
-#, fuzzy
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Germany (1TR6)"
-#~ msgstr "��skt"
-
-#, fuzzy
-#~ msgid "What do you wish to do?"
-#~ msgstr "Hva� viltu gera?"
-
-#, fuzzy
-#~ msgid "Install/Rescue"
-#~ msgstr "Innsetning"
-
-#, fuzzy
-#~ msgid "Rescue"
-#~ msgstr "Endurst�kka"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Hva�a snei�tegund viltu?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Veldu \"Innsetning\" ef �a� eru engar fyrri �tg�fur af Linux � t�lvunni\n"
-#~ "e�a ef �� vilt nota fleiri en eina dreifingu af Linux.\n"
-#~ "\n"
-#~ "Veldu \"Uppf�rsla\" ef �� vilt uppf�ra fyrri innsetningu af Linux "
-#~ "Mandrake:\n"
-#~ "%s e�a %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - R��lagt: Ef �� hefur aldrei sett Linux inn ��ur.\n"
-#~ "\n"
-#~ "  - Eftir �skum: Ef �� hefur �� nokkra reynslu me�iar with Linux, you "
-#~ "will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\".\n"
-
-#          ***********************************************
-#          ***   H�r fyrir ne�an er ���ingin m�n, en   ***
-#  ***********   �g f�r l�ka a�eins yfir �a� sem var   ************
-#          ***   ��tt fyrir ofan.  :-)  - ��rarinn     ***
-#          *** (�g kl�ra �etta seinnipartinn � morgun) ***
-#          ***********************************************
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "�essi hluti hefur a� geyma uppsetningu � sta�arnetstengingu\n"
-#~ "(LAN) e�a m�taldstengingu.\n"
-#~ "\n"
-#~ "Ef �� velur \"Sta�arnetstenging\" �� mun DrakX\n"
-#~ "reyna a� finna Ethernet netkorti� � v�linni.  � flestum tilvikum\n"
-#~ "finnast PCI netkort og er �� korti� strax tilb�i� fyrir netuppsetningu.\n"
-#~ "Ef netkorti� �itt er hinsvegar ISA kort �� er sj�lfvirk uppsetning � �v�\n"
-#~ "ekki m�guleg og �� �arft �v� a� velja rekil af listanum sem birtist.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef �� ert me� SCSI kort �� getur �� l�ti� leita a� �v� fyrst en s��an\n"
-#~ "gefi� upp vi�f�ng ef �a� finnst ekki.  Vi�f�ngin sem �� �arft a� nota\n"
-#~ "�ttir �� a� finna � lei�beiningunum sem komu me� kortinu.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef �� ert a� setja Mandrake Linux � t�lvu sem er hluti af sta�arneti\n"
-#~ "�� �ttir �� a� f� nau�synlegar uppl�singar fyrir tengingu hj� "
-#~ "kerfisstj�ra.\n"
-#~ "Uppl�singarnar sem �� �arft til a� tengjast sta�arneti me� TCP/IP eru:\n"
-#~ "IP vistfang, undirnetss�a (nets�a) og t�lvunafn. Ef �� ert a�\n"
-#~ "setja upp einkanet �� getur �� sj�lf(ur) �kve�i� hva�a vistfang,\n"
-#~ "nets�u og nafn �� notar � t�lvuna.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef �� velur \"M�taldstenging\" �� ver�ur m�taldstengingin ger� kl�r.\n"
-#~ "DrakX mun reyna a� finna m�taldi� �itt en ef s� leit ber ekki �rangur\n"
-#~ "�� ver�ur �� sj�lf(ur) a� velja ra�tengi� (COM port) sem m�taldi� er\n"
-#~ "tengt vi�."
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linux getur nota� margar ger�ir prentara.  Prentararnir krefjast\n"
-#~ "mismunandi uppsetninga.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef prentarinn �inn er tengdur beint vi� t�lvuna veldu �� \n"
-#~ "\"Sta�bundinn prentari\". �� �arft s��an a� tilgreina vi�\n"
-#~ "hva�a tengi prentarinn er tengdur og velja vi�eigandi s�u.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef �� vilt hafa a�gang a� prentara sem tengdur er vi� fjarl�ga UNIX v�l\n"
-#~ "(e�a Windows NT me� LPD) �� ver�ur �� a� velja \"Fjartengdur prentari\".\n"
-#~ "�� �arft ekki a� gefa upp notandanafn e�a lykilor� en �arft a� vita \n"
-#~ "nafni� � prentr��inni � �eim �j�n.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef �� vilt hafa a�gang a� SMB prentara (prentara sem er tengdur vi�\n"
-#~ "fjarl�ga Windows 9x/NT v�l), �� �arftu a� gefa upp SMB nafn �j�nsins\n"
-#~ "sem oftast er sama og TCP/IP nafn (en �arf ekki a� vera).  Einnig �arftu\n"
-#~ "IP vistfang, notandanafn, lykilor�, nafn vinnuh�ps og au�vita� sj�lft\n"
-#~ "nafn prentarans.  Sama gildir um NetWare prentara, nema �� �arft\n"
-#~ "ekkert vinnuh�psnafn."
-
-#, fuzzy
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "�a� er stranglega m�lt me� �v� a� �� svarir \"J�\" h�rna. Ef �� setur\n"
-#~ "Microsoft Windows inn s��ar �� skrifar �a� yfir r�sihluta disksins og\n"
-#~ "gerir ��r �ar me� �kleyft a� r�sa Linux nema �� hafir veri� b�in(n)\n"
-#~ "a� �tb�a r�sidiskling."
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Ey�a breytingum?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Hvernig m�s ertu me�?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Sj�lfvirk upplausn"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Til a� finna m�gulegar upplausnir munu nokkrar ver�a pr�fa�ar.\n"
-#~ "Skj�rinn �inn mun blikka...\n"
-#~ "�� getur sl�kkt � honum ef �� vilt, t�lvan flautar �egar �v� er loki�"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "�g get reynt a� finna m�gulegar upplausnir (t.d: 800x600).\n"
-#~ "Stundum getur t�lvan frosi� vi� �a�.\n"
-#~ "Viltu pr�fa?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Engar leyfilegar upplausnir fundust\n"
-#~ "Pr�fa�u a� velja anna� skj�kort e�a skj�"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Sj�lfvirk leit upplausna"
-
-#, fuzzy
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "ATI brautarm�s"
-
-#, fuzzy
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "USB m�s (3 e�a fleiri takkar)"
-
-#, fuzzy
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "USB m�s (3 e�a fleiri takkar)"
-
-#, fuzzy
-#~ msgid "Apple USB Mouse"
-#~ msgstr "USB m�s"
-
-#, fuzzy
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "USB m�s (3 e�a fleiri takkar)"
-
-#, fuzzy
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "USB m�s (3 e�a fleiri takkar)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI brautarm�s"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft brautarm�s"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech brautarm�s"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB m�s (3 e�a fleiri takkar)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft �tg�fa 2.1A e�a n�rri (ra�tengd)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (ra�tengd)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (ra�tengd)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (ra�tengd)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Almenn m�s (ra�tengd)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft samh�f� (ra�tengd)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Almenn �riggja hnappa m�s (ra�tengd)"
-
-#, fuzzy
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "t�kst ekki a� tengja nfs"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Dulk��un"
-
-#~ msgid "Show less"
-#~ msgstr "S�na f�rri"
-
-#~ msgid "Show more"
-#~ msgstr "S�na fleiri"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Hva�a lyklabor�suppsetningu viltu?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Viltu leita a� PCMCIA kortun?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Leita a� %s kortum?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Leita a� PCI kortum?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Leita a� r�tardisksnei�"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: �etta er ekki r�tardisksnei�.  Veldu a�ra."
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# When possible cp437 accentuated letters can be used too.
-#
-# '\240' is '�' (aacute) in cp437 encoding
-# '\224' is '�' (odiaeresis) in cp437 encoding.
-# '\221' is '�' (ae) in cp437 encoding
-# '\241' is '�' (iacute) in cp437 encoding
-# '\242' is '�' (oacute) in cp437 encoding
-# '\230' is '�' (yacute) in cp437 encoding
-# '\243' is '�' (oacute) in cp437 encoding
-# there is no '�' nor '�' in cp437; changed respectively to 'th' and 'd'
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Velkomin(n) � LILO st�rikerfisr�sistj�rann!\n"
-#~ "\n"
-#~ "Sl�du � <TAB> til ad f� lista yfir m�gulega valkosti.\n"
-#~ "\n"
-#~ "Til r�sa einn af theim, sl�du inn nafnid og s�dan � <ENTER>\n"
-#~ "eda b�ddu � %d sek�ndur thar til sj�lfgefin r�sing hefst.\n"
-#~ "\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Velkomin(n) i SILO styrikerfisraesistjorann!\n"
-#~ "\n"
-#~ "Sladu a <TAB> til ad fa lista yfir moegulega valkosti.\n"
-#~ "\n"
-#~ "Til raesa einn af theim, sl�du inn nafnid og sidan a <ENTER>\n"
-#~ "eda biddu i %d sekundur thar til sjalfgefin raesing hefst.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "Stillingar SILO"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "H�rna eru n�verandi stillingar SILO .\n"
-#~ "�� getur b�tt vi� fleirum e�a breytt �essum."
-
-#~ msgid "This label is already in use"
-#~ msgstr "�etta nafn er n� �egar � notkun."
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Innsetning SILO br�st s�kum eftirfarandi villu:"
-
-#~ msgid "Shutting down"
-#~ msgstr "Slekk � t�lvunni"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Veldu \"Innsetning\" ef �a� eru engar fyrri �tg�fur af Linux � t�lvunni\n"
-#~ "e�a ef �� vilt nota fleiri en eina dreifingu af Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "Veldu \"Uppf�rsla\" ef �� vilt uppf�ra fyrri innsetningu af Linux "
-#~ "Mandrake:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios),\n"
-#~ "Gold 2000 e�a 7.0 (Air)."
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Viltu nota LILO?"
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) getur r�st Linux og �nnur st�rikerfi.\n"
-#~ "Venjulega finnast �au vi� innsetningu � Linux.  Ef �� s�r�\n"
-#~ "ekki �itt kerfi �� getur �� b�tt �v� vi� n�na �samt ��rum.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef �� vilt ekki a� a�rir hafi a�gang a� einhverju kerfanna �� getur\n"
-#~ "�� einfaldlega fjarl�gt �a� n�na (en �� �arf r�sidiskling til a� r�sa "
-#~ "�a�)."
-
-#~ msgid ""
-#~ "Now that you've selected desired groups, please choose \n"
-#~ "how many packages you want, ranging from minimal to full \n"
-#~ "installation of each selected groups."
-#~ msgstr ""
-#~ "N� �egar flokkar hafa veri� valdir skaltu velja hve marga \n"
-#~ "�� vilt sitja inn.  �� getur tilgreint litla e�a fulla \n"
-#~ "innsetningu af p�kkum �r �eim flokkum sem �� valdir."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - R��lagt: Ef �� hefur aldrei sett Linux inn ��ur.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Eftir �skum: Ef �� hefur �� nokkra reynslu me�iar with Linux, you "
-#~ "will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "S�ki dulritunarpakkana"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Setja upp SCSI"
-
-#~ msgid "Local LAN"
-#~ msgstr "Sta�arnet(LAN)"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "St�r�: %s MB"
-
-#~ msgid "changing type of"
-#~ msgstr "breyti tegund"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Eftir %s disksnei�ar %s,"
-
-#~ msgid "linear"
-#~ msgstr "l�nulegan"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "Nota l�nulegan ham (nau�synlegt fyrir sum SCSI drif)"
-
-#~ msgid "User name:"
-#~ msgstr "Notandaheiti:"
-
-#~ msgid "Password:"
-#~ msgstr "Lykilor�:"
-
-#~ msgid "developer"
-#~ msgstr "forritari"
-
-#~ msgid "beginner"
-#~ msgstr "byrjandi"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "Sm��i HTP r�sidisks mist�kst.\n"
-#~ "�� g�tir �urft a� endurr�sa og sl� inn ``%s'' � skipanal�nuna"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "�a� �arf a� byrja innsetningu upp � n�tt me� n�ju vi�f�ngunum"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "�a� �arf a� byrja innsetninguna upp � n�tt og r�sa me� diskling"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Settu diskling � drifi� til a� b�a til HTP r�singu\n"
-#~ "(�ll g�gn � �essum diskling tapast)"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "Nafni� %s er �egar � notkun"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Veldu innsetningu e�a uppf�rslu"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Hverskyns notkun viltu?"
diff --git a/perl-install/share/po/it.po b/perl-install/share/po/it.po
deleted file mode 100644
index 72cc40b1b..000000000
--- a/perl-install/share/po/it.po
+++ /dev/null
@@ -1,12041 +0,0 @@
-# Italian Translation of DrakX
-# Copyright (C) 1999 Mandrakesoft
-# Paolo Lorenzin <pasusu@tin.it>, 1999-2000.
-# Roberto Rosselli Del Turco <rosselli@ling.unipi.it>, 2000-2002
-# 8.0 Tech/Lang proofreading by Roberto Rosselli Del Turco <rosselli@ling.unipi.it>
-# 
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 0.1\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-09 18:54+0100\n"
-"Last-Translator: Roberto Rosselli Del Turco <rosselli@ling.unipi.it>\n"
-"Language-Team: Italian <it@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configura tutte le testine indipendentemente"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Usa l'estensione Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configura solo la scheda \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Configurazione multi-testine"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Il tuo sistema supporta la configurazione di pi� testine.\n"
-"Cosa vuoi fare?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Scheda grafica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Scegli una scheda grafica"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Scegli un server X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Server X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Scegli un driver X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Driver X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Che configurazione di XFree vuoi avere?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La tua scheda pu� avere accelerazione 3D hardware, ma solo con XFree %s.\n"
-"La tua scheda � supportata da XFree %s che potrebbe avere un miglior "
-"supporto in 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"La tua scheda pu� avere il supporto per l'accelerazione 3D hardware con "
-"XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s con accelerazione 3D hardware"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"La tua scheda pu� avere l'accelerazione 3D hardware con XFree %s,\n"
-"NOTA CHE � UN SUPPORTO SPERIMENTALE E POTREBBE BLOCCARE IL TUO COMPUTER."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s con accelerazione 3D hardware SPERIMENTALE"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La tua scheda pu� avere accelerazione 3D hardware, ma solo con XFree %s,\n"
-"NOTA CHE � UN SUPPORTO SPERIMENTALE E POTREBBE BLOCCARE IL TUO COMPUTER.\n"
-"La tua scheda � supportata da XFree %s che potrebbe avere un miglior "
-"supporto in 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installazione driver video)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configurazione di XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Scegli la quantit� di memoria della tua scheda grafica"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Scegli le opzioni per il server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Scegli un monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"I due parametri critici sono la frequenza di refresh verticale, che � la "
-"frequenza\n"
-"con cui l'intero schermo � aggiornato, e ancora pi� importante la frequenza\n"
-"di sincronia orizzontale, che � la frequenza con cui le line di scansione "
-"sono mostrate. \n"
-"\n"
-"� MOLTO IMPORTANTE che tu non specifichi un tipo di monitor con una gamma di "
-"sincronia che vada oltre le capacit� del tuo monitor: potresti "
-"danneggiarlo.\n"
-"Se hai dubbi, scegli un settaggio prudente."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Frequenza di refresh orizzontale"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Frequenza di refresh verticale"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor non configurato"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Scheda grafica non ancora configurata"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Risoluzioni non ancora selezionate"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Vuoi provare la configurazione ?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Attenzione: il test di questa scheda video pu� bloccare il computer"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test della configurazione"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"prova a modificare alcuni parametri"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Si � verificato un errore:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Uscita in %d secondi"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "� il settaggio corretto?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Si � verificato un errore, prova a modificare alcuni parametri"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Risoluzione"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Seleziona risoluzione e profondit� di colore"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Scheda grafica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Ancora"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modo Esperto"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mostra tutto"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Risoluzioni"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tipo di tastiera: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo di mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo del mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frequenza orizzontale del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Refresh verticale del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Scheda grafica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identificazione scheda grafica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memoria scheda grafica: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profondit� di colore: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Risoluzione: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Server XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Driver XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Sto preparando la configurazione di X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Cosa vuoi fare?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Cambia monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Cambia scheda grafica"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Cambia opzioni server"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Cambia risoluzione"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostra informazioni"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Nuovo test"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Esci"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Mantieni le modifiche?\n"
-"La configurazione corrente �:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X all'avvio"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Posso configurare il tuo computer per eseguire X automaticamente all'avvio.\n"
-"Vuoi che X venga eseguito quando riavvierai?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Per favore rientra come %s per attivare le modifiche"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Per favore esci e usa Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 colori (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mila colori (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mila colori (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milioni di colori (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardi di colori (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 Kb"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 Kb"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 Mb o pi�"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA standard, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatibile 8514, 1024x768 a 87 Hz interlacciato (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz interlacciato, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA estesa, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA non-interlacciato, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA alta frequenza, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequenza che raggiunge 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequenza che raggiunge 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequenza che raggiunge 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor che raggiunge 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor che raggiunge 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primo settore della partizione di boot"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primo settore del disco rigido (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Installazione di SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Dove vuoi installare il bootloader?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Installazione di LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO con menu in modo testo"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO con menu grafico"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Avvia da DOS/Windows (usando loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Opzioni principali del bootloader"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Bootloader da usare"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Installazione del bootloader"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dispositivo di boot"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (non funziona con vecchi BIOS)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compatta"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compatta"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Modo video"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Ritardo prima di avviare con l'immagine predefinita"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Password"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Password (ripeti)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Limita opzioni della linea di comando"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "limita"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Pulisci /tmp ad ogni avvio"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precisa la dimensione RAM se necessario (trovati %d Mb)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Abilita profili multipli"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Specifica dimensione RAM in Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"L'opzione ''Limita opzioni della linea di comando'' � inutile\n"
-"senza una password"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Per favore prova di nuovo"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Le password non corrispondono"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Messaggio di init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Attesa dell'Open Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Attesa per il boot del kernel"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Abilita l'avvio da CD-ROM?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Abilita boot OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Sistema operativo predefinito?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Avete deciso di installare il bootloader su una partizione.\n"
-"Questo significa che avete gi� un bootloader installato sul disco rigido dal "
-"quale effettuate il boot\n"
-"(ad esempio System�Commander).\n"
-"\n"
-"Da quale disco effettuate il boot?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Queste sono le voci attuali.\n"
-"Puoi aggiungerne altre o cambiare quelle esistenti."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Aggiungi"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Fatto"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modifica"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Che tipo di voce vuoi aggiungere"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Altro OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Altro OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Altro OS (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Immagine"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Aggiungi"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lettura-scrittura"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabella"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Non sicuro"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etichetta"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Predefinito"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Dimensioni Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "No Video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Rimuovi voce"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Etichetta vuota non ammessa"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Dovete indicare l'immagine di un kernel"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Devi specificare una partizione radice"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Questa etichetta � gi� stata usata"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Trovate %s interfacce %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Ne hai un'altra?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Hai una qualsiasi interfaccia %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "No"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "S�"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Vedi informazioni hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installazione driver per scheda %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Quale driver %s dovrei provare?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"in alcuni casi, il driver %s ha bisogno di informazioni extra per "
-"funzionare\n"
-"correttamente, anche se normalmente pu� farne a meno. Vorresti specificare\n"
-"opzioni extra o lasciare che il driver cerchi sulla tua macchina le\n"
-"informazioni di cui ha bisogno? Occasionalmente, la ricerca bloccher� il\n"
-"computer, ma non dovrebbe causare alcun danno."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Investgazione automatica"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Specifica opzioni"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Adesso potete fornire le sue opzioni al modulo %s.\n"
-"Si noti che ogni indirizzo dovrebbe essere inserito con il prefisso 0x�(ad "
-"es. '0x123')."
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Adesso puoi passare le sue opzioni al modulo %s.\n"
-"Le opzioni sono in formato ''nome=valore nome2=valore2 ...''.\n"
-"Per esempio, ''io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opzioni del modulo:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Caricamento del modulo %s fallito.\n"
-"Vuoi riprovare con altri parametri?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "accesso ai programmi X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "accesso agli strumenti RPM"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "permetti \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "accesso ai file di amministrazione del sistema"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s gi� aggiunto)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Questa password � troppo semplice"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Per favore fornisci un nome utente"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Il nome utente deve contenere solo lettere minuscole, numeri, '-' e '_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Questo nome utente � gi� stato aggiunto"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Aggiungi utente"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Inserisci un utente\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Accetta utente"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Vero nome"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nome utente"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Posso configurare il tuo computer per fare automaticamente il login di un "
-"utente all'avvio.\n"
-"Vuoi sfruttare questa caratteristica?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Scegli l'utente predefinito"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Scegli il window manager da eseguire:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Per favore, scegli la lingua da utilizzare."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Potete scegliere altre lingue che saranno disponibili dopo l'installazione"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Tutto"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Permetti a tutti gli utenti"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Condivisione personalizzata"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Nessuna condivisione"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Il pacchetto %s�deve essere installato. Volete installarlo?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Potete esportare usando NFS o Samba. Quale desiderate"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Il pacchetto obbligatorio %s � assente"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Annulla"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Lancia userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"La condivisione in base all'utente usa il gruppo \"fileshare\".�\n"
-"Potete utilizzare userdrake per aggiungere un utente a questo gruppo."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Benvenuti cracker"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Scarso"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Normale"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Pi� alto"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoico"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Questo livello va usato con cura. Rende il sistema pi� facile da usare,\n"
-"ma molto delicato: non deve essere usato per una macchina connessa ad altre\n"
-"o a Internet. Non c'� nessun accesso con password."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ora le password sono abilitate, ma l'uso come computer di rete � comunque\n"
-"ancora sconsigliato."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Questo � il livello di sicurezza standard raccomandato per un computer da "
-"usare per\n"
-"connettersi a Internet come cliente."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Esistono gi� alcuni limiti, e ogni notte vengono eseguiti ulteriori "
-"controlli automatici."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Con questo livello di sicurezza, l'uso di questo sistema come server "
-"diventa\n"
-"possibile. La sicurezza � ora abbastanza alta per consentire l'utilizzo\n"
-"del sistema come server che accetta connessioni da molti clienti. Nota: se "
-"la vostra\n"
-"macchina � un semplice cliente su Internet, fareste meglio a scegliere un "
-"livello\n"
-"pi� basso."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Basato sul livello precedente, ma ora il sistema � completamente\n"
-"chiuso. Le funzioni di sicurezza sono al massimo."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Scegli livello di sicurezza"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Livello di sicurezza"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Usa libsafe per i server"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Una libreria che difende il sistema da attacchi del tipo \"buffer overflow\" "
-"e \"format string\"."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Benvenuti su %s, il selezionatore di sistemi operativi!\n"
-"\n"
-"Scegliete un sistema operativo nella lista qui sopra, o\n"
-"aspettate %d�secondi per il boot predefinito.\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Benvenuti su GRUB, il selezionatore di sistemi operativi!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Usate i tasti %c�e�%c per evidenziare la voce che interessa."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Premete Invio per avviare il sistema operativo selezionat, 'e' per modificare"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "i comandi prima del boot, o 'c' per avere una linea di comando."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "La voce evidenziata verr� avviata automaticamente in %d secondi."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "spazio insufficiente in /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menu di avvio"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Non puoi installare il bootloader su una partizione %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "nessun aiuto presente (per ora).\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configurazione stile di avvio"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_File"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/File/_Esci"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor�NewStyle per categorie"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor tradizionale"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Gtk tradizionale"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Lancia Aurora al momento del boot"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Modo LILO/GRUB"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Al momento state usando %s come Boot Manager.\n"
-"Cliccate su Configura per lanciare l'assistente di configurazione."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configura"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Modo sistema"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Lancia il sistema X Window all'avvio"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "No, non voglio il login automatico"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "S�, voglio il login automatico con questo (utente, desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Non riesco ad aprire /etc/inittab in lettura: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mb"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuti"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d secondi"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Non posso fare degli screenshot prima del partizionamento"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Dopo 'installazione degli screenshot saranno disponibili in %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francia"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa�Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgio"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Repubblica Ceca"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Germania"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grecia"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norvegia"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Svezia"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Olanda"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Stati Uniti"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Per favore prima fate un backup dei vostri dati"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Leggete con attenzione!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se intendete usare aboot, prestate attenzione a lasciare uno spazio libero "
-"(2048\n"
-"settori sono sufficienti) all'inizio del disco"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Errore"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistente"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Scegli un'azione"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Hai una grossa partizione\n"
-"(generalmente usata da Microsoft Dos/Windows).\n"
-"Per prima cosa suggerisco di ridimensionare quella partizione\n"
-"(clicca su di essa, poi clicca su \"Ridimensiona\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Per favore clicca su una partizione"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Dettagli"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "FS con journal"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Vuoto"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Altro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipo di filesystem:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Crea"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Usa ''%s'' invece"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Cancella"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Prima usa ''Unmount''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Dopo aver cambiato tipo di partizione %s, tutti i dati su questa partizione "
-"saranno persi"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Scegli una partizione"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Scegli un'altra partizione"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Esci"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Passa a modo Esperto"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Passa a modo Normale"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Un passo indietro"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Continuo comunque?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Esci senza salvare"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Esci senza scrivere la tabella delle partizioni?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Vuoi salvare le modifiche a /etc/fstab?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Alloca automaticamente"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Azzera tutto"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informazioni sul disco fisso"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Tutte le partizioni primarie sono usate"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Non posso aggiungere altre partizioni"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Per avere pi� partizioni, per favore eliminarne una per essere in grado di "
-"crearne una estesa"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Salva la tabella delle partizioni"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Ripristina tabella delle partizioni"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Recupera tabella delle partizioni"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ricarica tabella delle partizioni"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automounting di media rimovibili"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Scegli file"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La copia di sicurezza della tabella delle partizioni non ha la stessa\n"
-"dimensione. Continuo comunque?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Attenzione"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Inserisci un floppy nel drive\n"
-"Tutti i dati su questo floppy saranno persi"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Provo a recuperare la tabella delle partizioni"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Informazioni dettagliate"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Punto di mount"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opzioni"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Ridimensiona"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Sposta"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatta"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Esegui mount"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Aggiungi a RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Aggiungi a LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Esegui unmount"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Rimuovi da RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Rimuovi da LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modifica RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Usa per loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Crea una nuova partizione"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Settore iniziale: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Dimensione in Mb: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipo di filesystem: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punto di mount:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferenza: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Rimuovo il file di loopback?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Cambia il tipo di partizione"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Quale filesystem vuoi?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Passo da ext2 a ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Dove vuoi fare il mount del file loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Dove vuoi fare il mount del dispositivo %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Non puoi deselezionare punti di mount perch� questa partizione � usata\n"
-"per il loopback. Prima rimuovi il loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Calcolo dei vincoli del filesystem FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Ridimensionamento"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Questa partizione non � ridimensionabile"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Dovresti eseguire il backup di tutti i dati su questa partizione"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Dopo aver ridimensionato la partizione %s, tutti i dati su questa partizione "
-"saranno persi"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Scegli la nuova dimensione"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nuova dimensione in Mb: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Su quale disco vuoi spostarlo?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Settore"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Su che settore vuoi spostarlo?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Spostamento"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Spostamento partizione..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Scegli un RAID esistente a cui effettuare l'aggiunta"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nuovo"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Scegli un LVM esistente a cui effettuare l'aggiunta"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Nome LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Questa partizione non pu� essere usata per il loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nome file loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Assegna un nome di file"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "File gi� usato da un altro loopback, selezionane uno diverso"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Il file esiste gi�. Lo uso?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opzioni di mount"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Varie"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "livello"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "dimensione del blocco"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Fai attenzione: questa operazione � pericolosa."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Che tipo di partizionamento?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Spiacente ma non accetter� di creare /boot cos� avanti sul drive (su un "
-"cilindro > 1024).\n"
-"Nel caso tu usassi LILO non funzionerebbe, o se non usassi LILO non ti "
-"servirebbe /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La partizione che hai scelto di aggiungere come root (/) si trova\n"
-"fisicamente oltre il 1024esimo cilindro del disco fisso, e non hai una\n"
-"partizione /boot. Se hai intenzione di usare LILO come boot manager, "
-"accertati di creare una partizione /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Hai selezionato una partizione RAID software come root (/).\n"
-"Nessun bootloader pu� gestirla senza una partizione /boot.\n"
-"Perci� accertati di aggiungere una partizione /boot."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr ""
-"La tabella delle partizioni del disco %s sta per essere scritta su disco!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Sar� necessario riavviare il sistema prima che le modifiche diventino "
-"effettive!"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Dopo aver formattato la partizione %s, tutti i dati su questa partizione "
-"saranno persi"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formattazione"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formattazione file di loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formattazione partizione %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Nascondi file"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Sposta i file sulla nuova partizione"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"La directory %s contiene gi� dei dati\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Sto spostando i file sulla nuova partizione"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Sto copiando %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Sto cancellando: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "la partizione %s adesso � nota come %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lettera di drive DOS: %s (solo una supposizione)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nome: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inizia: settore %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Dimensione: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s settori"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Da cilindro %d a %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formattato\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Non formattato\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "In linea\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"File di loopback:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partizione di boot predefinita\n"
-"    (per boot MS-DOS, non per lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Livello %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Dimensione del blocco %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Dischi RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nome file di loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Molto probabilmente questa partizione �\n"
-"una partizione Driver, � meglio\n"
-"non toccarla.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Questa speciale partizione di boot\n"
-"viene utilizzata per effettuare\n"
-"il dual-boot del tuo sistema.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Dimensione: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindri, %s testine, %s settori\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Dischi LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo tabella delle partizioni: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "su bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opzioni: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Chiave di crittazione del filesystem"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Scegliete la chiave di crittazione del filesystem"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Questa chiave di crittazione � troppo semplice (deve essere lunga almeno %d "
-"caratteri)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Le chiavi di crittazione non corrispondono"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Chiave di crittazione"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Chiave di crittazione (di nuovo)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Cambia tipo"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Per favore clicca su un supporto"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Ricerca server"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formattazione di %s fallita"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Non so come formattare %s in tipo %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "il mount della partizione %s sulla directory %s non � riuscito"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck � fallito con codice di uscita %d o segnale %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "errore in fase di unmount di %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "semplice"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "con /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Non puoi usare JFS per partizioni pi� piccole di 16 Mb"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Non puoi usare ReiserFS per partizioni pi� piccole di 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "I punti di mount devono iniziare con /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "C'� gi� una partizione con il punto di mount %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Non puoi usare un Volume Logico LVM per il punto di mount %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Questa directory dovrebbe rimanere all'interno del filesystem root"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "� un vero filesystem (ext2, reiserfs) per questa punto di mount\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Non puoi usare un filesystem crittato per il punto di mount %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Non c'� abbastanza spazio libero per l'allocazione automatica"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nulla da fare"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Errore aprendo %s in scrittura: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Si � verificato un errore - non � stato trovata alcuna unit� valida su cui "
-"creare nuovi filesystem. Per favore controlla il tuo hardware per stabilire "
-"la causa di questo problema"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Non hai alcuna partizione!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux � un sistema operativo multiutente, e questo significa che\n"
-"ciascun utente pu� disporre di una configurazione personalizzata, di uno\n"
-"spazio per i propri file, e cos� via; consultate il ''Manuale dell'utente''\n"
-"per saperne di pi�. Ma, a differenza di \"root\", che � l'amministratore\n"
-"del sistema, gli utenti che aggiungerete adesso non avranno il diritto di\n"
-"cambiare nulla, se non i propri file e la propria configurazione. Dovrete\n"
-"crearne almeno uno per voi stessi, e dovreste usare quello per l'uso\n"
-"quotidiano: per quanto sia molto comodo entrare nel sistema come \"root\"\n"
-"tutti i giorni, potrebbe anche essere molto pericoloso! Anche un errore\n"
-"banale potrebbe significare un sistema non pi� in grado di funzionare\n"
-"correttamente. Se, invece, commettete un errore, anche grave, in qualit� di\n"
-"utente normale, potreste perdere parte dei vostri dati, ma non\n"
-"compromettere l'intero sistema.\n"
-"\n"
-"Prima di tutto, inserite il vostro nome reale. Naturalmente questo non �\n"
-"obbligatorio: potete digitare quello che volete. Fatto questo, DrakX\n"
-"prender� la prima parola che avete inserito nel campo di testo e la copier�\n"
-"alla voce \"Nome utente\". Questo � il nome che l'utente dovr� usare per\n"
-"accedere al sistema, ma potete cambiarlo. Poi digitate una password per\n"
-"questo utente. La password di un utente non privilegiato dal punto di vista\n"
-"della sicurezza non � cruciale come quella di \"root\", ovviamente, ma non\n"
-"c'� motivo di essere frettolosi: dopo tutto, si tratta dei vostri file.\n"
-"\n"
-"Se cliccate su \"Accetta utente\", potrete poi aggiungerne un altro, e\n"
-"altri ancora, a vostra discrezione. Aggiungete un utente per ciascuno dei\n"
-"vostri amici, oppure per vostro padre e vostro fratello, ad esempio. Dopo\n"
-"aver aggiunto tutti gli utenti che volete, selezionate \"Fatto\".\n"
-"\n"
-"Cliccando sul pulsante \"Avanzato\" potrete cambiare la \"shell\" per\n"
-"quell'utente (come opzione predefinita � bash)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"In alto potete vedere l'elenco delle partizioni Linux individuate sul\n"
-"vostro disco rigido. Potete attenervi alle scelte fatte dall'assistente,\n"
-"vanno bene per la maggior parte delle installazioni. Se fate dei\n"
-"cambiamenti, ricordate che dovete definire per lo meno una partizione root\n"
-"(''radice'') (\"/\"). Non scegliete una partizione troppo piccola,\n"
-"altrimenti non sarete in grado di installare parte del software. Se volete\n"
-"archiviare i vostri dati su una partizione separata, dovrete creare anche\n"
-"una partizione per \"/home\" (questo � possibile soltanto se avete a\n"
-"disposizione pi� di una partizione Linux).\n"
-"\n"
-"Ogni partizione � elencata in base a queste caratteristiche: \"Nome\",\n"
-"\"Capacit�\".\n"
-"\n"
-"Il \"Nome\" � strutturato in: \"tipo di disco rigido\", \"numero del\n"
-"disco\", \"numero della partizione\" (ad esempio, \"hda1\").\n"
-"\n"
-"Il \"tipo di disco rigido\" � \"hd\" se il vostro disco � di tipo IDE, e\n"
-"\"sd\" se, invece, � un disco SCSI.\n"
-"\n"
-"Il \"numero del disco\" � sempre una lettera che segue \"hd\" o \"sd\". Per\n"
-"i dischi IDE:\n"
-"\n"
-" * \"a\" significa \"disco rigido master sul controller IDE primario\";\n"
-"\n"
-" * \"b\" means \"disco rigido slave sul controller IDE primario\";\n"
-"\n"
-" * \"c\" means \"disco rigido master sul controller IDE secondario\";\n"
-"\n"
-" * \"d\" means \"disco rigido slave sul controller IDE secondario\".\n"
-"\n"
-"Per i dischi rigidi di tipo SCSI, invece, una \"a\" significa \"ID SCSI\n"
-"pi�\", una \"b\" significa \"ID SCSI superiore ad a\", etc."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"La distribuzione Mandrake Linux � suddivisa su pi� CD-ROM. DrakX sa se uno\n"
-"dei pacchetti selezionati si trova su un altro CD-ROM, pertanto provveder�\n"
-"a espellere il CD attualmente inserito nel lettore e a chiedervi di\n"
-"inserire quello corretto."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Adesso � il momento di indicare i programmi che volete siano installati sul\n"
-"vostro sistema. Ci sono migliaia di programmi disponibili per Mandrake\n"
-"Linux, e nessuno si aspetta che li conosciate tutti a memoria.\n"
-"\n"
-"Se state effettuando un'installazione standard da CD-ROM, per prima cosa vi\n"
-"verr� chiesto di specificare quali sono i CD in vostro possesso (solo se\n"
-"siete in modalit� Esperto): controllate i CD della distribuzione, cliccate\n"
-"sulle caselle corrispondenti ai CD che avete e infine sul pulsante \"Ok\"\n"
-"quando siete pronti per continuare.\n"
-"\n"
-"I pacchetti sono organizzati in gruppi corrispondenti a usi particolari\n"
-"della vostra macchina. I gruppi sono a loro volta divisi in quattro\n"
-"sezioni:\n"
-"\n"
-" * \"Workstation\": scegliete uno o pi� dei gruppi di questa sezione se la\n"
-"vostra macchina verr� utilizzata prevalentemente come workstation.\n"
-"\n"
-" * \"Sviluppo\": se la macchina verr� usata per lo sviluppo di software\n"
-"scegliete i gruppi appropriati.\n"
-"\n"
-" * \"Server\": se il computer sar� usato come server, qui potrete scegliere\n"
-"i servizi pi� comuni da installare.\n"
-"\n"
-" * \"Ambiente grafico\": scegliete qui il vostro ambiente grafico "
-"preferito.\n"
-"Indicatene almeno uno se desiderate avere una workstation grafica!\n"
-"\n"
-"Spostando il puntatore del mouse sul nome di un gruppo verr� mostrato un\n"
-"breve testo di informazioni riguardo quest'ultimo. Se state effettuando\n"
-"un'installazione normale (non un aggiornamento) e deselezionate tutti i\n"
-"gruppi, comparir� una finestra di dialogo che vi proporr� alcune opzioni\n"
-"relative a un'installazione ''minima'':\n"
-"\n"
-" * \"With X\": installa i pacchetti strettamente necessari per avere un\n"
-"ambiente grafico funzionante;\n"
-"\n"
-" * \"With basic documentation\": installa il sistema base pi� le utilit� di\n"
-"base e la relativa documentazione; questo tipo di installazione � utile se\n"
-"si vuole configurare un server;\n"
-"\n"
-" * \"Truly minimal install\": provveder� all'installazione dello stretto\n"
-"necessario per avere un sistema Linux funzionante, avente come unica\n"
-"interfaccia la linea di comando.\n"
-"\n"
-"Se lo desiderate, potete abilitare l'opzione \"Selezione individuale dei\n"
-"pacchetti\". Questa � utilissima se conoscete bene i pacchetti presenti\n"
-"nella distribuzione o se desiderate avere il totale controllo di ci� che\n"
-"verr� installato.\n"
-"\n"
-"Se avete cominciato l'installazione in modalit� \"Aggiornamento\", potete\n"
-"deselezionare tutti i gruppi per evitare di installare nuovi pacchetti, in\n"
-"questo modo effettuerete soltanto il ripristino o l'aggiornamento del\n"
-"sistema esistente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Ora, se avete scelto di indicare i pacchetti su base individuale, potete\n"
-"vedere una struttura ad albero contenente tutti i pacchetti organizzati in\n"
-"gruppi e sotto-gruppi. Mentre sfogliate questa lista gerarchica potete\n"
-"selezionare interi gruppi, sotto-gruppi o singoli pacchetti.\n"
-"\n"
-"Quando selezionate un pacchetto all'interno dell'albero, ne compare una\n"
-"descrizione sulla destra. Una volta terminata la scelta, cliccate sul\n"
-"pulsante \"Installa\" che provveder� a far partire l'installazione vera e\n"
-"propria. Il tempo necessario varia in base al numero di pacchetti che\n"
-"devono essere installati e alla velocit� del vostro hardware, l'attesa\n"
-"potrebbe anche essere lunga. Una stima del tempo richiesto per finire\n"
-"l'installazione � visibile sullo schermo, in questo modo potrete sapere se\n"
-"avete tempo a sufficienza per godervi una tazza di caff�.\n"
-"\n"
-"!! Se avete selezionato un pacchetto che offre un servizio come server\n"
-"(intenzionalmente, oppure perch� faceva parte di un gruppo), vi verr�\n"
-"chiesta conferma riguardo una sua effettiva installazione. Come opzione\n"
-"predefinita, in Mandrake Linux tutti i servizi installati vengono avviati\n"
-"automaticamente al momento del boot. Anche se si tratta di servizi sicuri\n"
-"al momento in cui � stata rilasciata questa versione della distribuzione,\n"
-"potrebbe succedere che vengano scoperte delle falle di sicurezza in un\n"
-"momento successivo. Se poi non avete proprio idea di quale sia la funzione\n"
-"di uno di questi pacchetti, cliccate sul pulsante \"No\". Cliccando su\n"
-"\"S�\" i servizi elencati verranno installati e saranno attivati in maniera\n"
-"automatica. !!\n"
-"\n"
-"L'opzione \"Mostra i pacchetti selezionati automaticamente\" vi permette di\n"
-"disabilitare la finestra di dialogo che compare tutte le volte che il\n"
-"programma di installazione seleziona automaticamente uno o pi� pacchetti.\n"
-"Il programma determina in modo automatico, infatti, quali sono i pacchetti\n"
-"che sono indispensabili a un dato pacchetto (''dipendenze'') perch�\n"
-"quest'ultimo possa essere installato con successo.\n"
-"\n"
-"Il piccolo dischetto floppy in fondo alla lista vi permette di caricare una\n"
-"lista di pacchetti scelti durante una precedente installazione. Cliccando\n"
-"su questa icona vi verr� chiesto di inserire un floppy che avrete creato\n"
-"alla fine di un'altra installazione. Consultate le informazioni che\n"
-"riguardano l'ultimo passo del processo di installazione per sapere come\n"
-"creare questo dischetto."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Se desiderate connettere il vostro computer a Internet o a una rete locale,\n"
-"assicuratevi di scegliere l'opzione corretta. Accendete la periferica che\n"
-"dovrete usare per connettervi prima di scegliere l'opzione adeguata, per\n"
-"permettere a DrakX di individuarla automaticamente.\n"
-"\n"
-"Mandrake Linux vi permette di configurare la vostra connessione a Internet\n"
-"durante il processo di installazione. Le connessioni disponibili sono:\n"
-"modem tradizionale, modem ISDN, connessione ADSL, cable modem, e infine una\n"
-"semplice connessione a una LAN (Ethernet).\n"
-"\n"
-"Non possiamo descrivere in dettaglio le caratteristiche di ogni\n"
-"configurazione. In ogni caso, accertatevi di avere a portata di mano tutti\n"
-"i parametri indicati dal vostro fornitore di servizi internet o dal vostro\n"
-"amministratore di sistema.\n"
-"\n"
-"Per maggiori dettagli riguardo la configurazione della connessione a\n"
-"Internet potete consultare il relativo capitolo del ''User Guide''; in\n"
-"alternativa, potete attendere di aver portato a termine l'installazione e\n"
-"usare poi il programma descritto in tale capitolo per configurare la\n"
-"connessione.\n"
-"\n"
-"Se desiderate configurare la rete dopo aver terminato l'installazione, o se\n"
-"avete gi� configurato la vostra rete, cliccate su \"Annulla\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"A questo punto potete scegliere i servizi da lanciare automaticamente\n"
-"all'avvio del sistema.\n"
-"\n"
-"Qui sono elencati tutti i servizi disponibili con l'installazione attuale.\n"
-"Esaminateli attentamente e disabilitate quelli che non sono sempre\n"
-"necessari all'avvio.\n"
-"\n"
-"Selezionando un servizio comparir� un breve testo di aiuto che ne spiega le\n"
-"caratteristiche. Se non siete realmente sicuri dell'utilit� o meno di un\n"
-"servizio, � pi� prudente non modificare le impostazioni predefinite.\n"
-"\n"
-"!! In questa fase dell'installazione dovete fare le vostre scelte con\n"
-"particolare attenzione nel caso intendiate usare il vostro computer come\n"
-"server: probabilmente non volete che siano abilitati servizi di cui non\n"
-"avete bisogno. Ricordate che numerosi servizi sono potenzialmente\n"
-"pericolosi se attivi su un server. Come regola generale, selezionate\n"
-"soltanto quelli di cui avete effettivamente bisogno. !!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux gestisce il tempo in base al GMT (''Greenwich Manage Time'') e lo\n"
-"traduce nell'ora locale in base al fuso orario selezionato. Tuttavia �\n"
-"possibile disabilitare questa opzione togliendo il segno di spunta alla\n"
-"casella \"Hardware clock set to GMT\", in modo che l'orologio hardware sia\n"
-"lo stesso dell'orologio di sistema. Questa scelta pu� tornare utile nel\n"
-"caso sulla macchina sia installato un altro sistema operativo, ad esempio\n"
-"Windows.\n"
-"\n"
-"L'opzione \"Automatic time synchronization\" provveder� a gestire l'ora\n"
-"grazie alla connessione con un server del tempo remoto via Internet.\n"
-"Scegliete un server vicino a voi nella lista che vi verr� mostrata. Perch�\n"
-"questa opzione funzioni, naturalmente, dovete disporre di una connessione a\n"
-"Internet funzionante. Sulla vostra macchina verr� installato un server del\n"
-"tempo che potr� essere usato anche per altre macchine che si trovano sulla\n"
-"vostra rete locale."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (che sta per ''X Window System'') � il cuore dell'interfaccia grafica di\n"
-"GNU/Linux, sulla quale sono basati tutti gli ambienti grafici che sono\n"
-"inclusi in Mandrake Linux (KDE, GNOME, AfterStep, WindowMaker, etc.). In\n"
-"questa sezione, DrakX tenter� di configurare X automaticamente.\n"
-"\n"
-"� molto raro che non abbia successo: l'unico caso in cui ci� potrebbe\n"
-"accadere � se l'hardware in questione � molto vecchio (o molto recente). Se\n"
-"l'operazione riesce, DrakX lancer� X automaticamente, con la miglior\n"
-"risoluzione possibile, in base alle dimensioni del monitor. A quel punto,\n"
-"comparir� una finestra che vi chieder� se potete vederla.\n"
-"\n"
-"Se state effettuando un'installazione in modo \"Esperto\", verr� lanciato\n"
-"l'assistente di configurazione di X. Consultate la sezione del manuale\n"
-"dedicata a questo assistente per avere pi� informazioni al riguardo.\n"
-"\n"
-"Se potete vedere il messaggio e rispondete \"S�\", allora DrakX passer�\n"
-"alla fase successiva. Se non potete vedere il messaggio, significa che la\n"
-"configurazione non andava bene, e il test terminer� automaticamente dopo 10\n"
-"secondi, riportandovi alla schermata precedente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Pu� verificarsi il caso che il primo tentativo non sia quello giusto (lo\n"
-"schermo � troppo piccolo, spostato a destra o a sinistra...). Questo � il\n"
-"motivo per cui, anche se X viene lanciato correttamente, DrakX vi chieder�\n"
-"subito dopo se la configurazione va bene, e vi proporr� di cambiarla\n"
-"elencando una lista di modi video validi (in base a quello che ha potuto\n"
-"accertare) chiedendovi di sceglierne uno.\n"
-"\n"
-"Come ultima risorsa, se proprio non riuscite a far funzionare X, scegliete\n"
-"\"Cambia scheda grafica\", selezionate \"Unlisted card\", e quando vi verr�\n"
-"chiesto quale server desiderate utilizzare, scegliete \"FBDev\": si tratta\n"
-"di un'opzione a prova d'errore, che funziona con qualsiasi scheda grafica\n"
-"moderna. Quindi scegliete \"Nuovo test\" per essere sicuri."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Infine DrakX vi chieder� se desiderate utilizzare l'interfaccia grafica una\n"
-"volta terminato il processo di avvio del sistema. Notate che questa domanda\n"
-"verr� fatta anche se avete deciso di non provare la configurazione.\n"
-"Ovviamente dovrete scegliere \"No\" se la vostra macchina dovr� svolgere il\n"
-"ruolo di server, o se non siete riusciti a ottenere una configurazione\n"
-"corretta."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Il CD-ROM di Mandrake Linux ha una modalit� ''salvataggio'' preconfigurata.\n"
-"Potete accedervi effettuando il boot dal CD-ROM, premendo il tasto >>F1<<\n"
-"all'avvio e digitando >>rescue<< dal prompt. Ma se il vostro computer non\n"
-"pu� essere avviato dal CD-ROM, dovete effettuare questa operazione (la\n"
-"creazione di un disco di avvio) per almeno due ragioni:\n"
-"\n"
-" * DrakX riscriver� il settore di boot (MBR) del vostro disco principale (a\n"
-"meno che voi non usiate un altro gestore del boot), in modo che possiate\n"
-"avviare sia Windows che GNU/Linux, se sul vostro sistema � installato anche\n"
-"Windows. Tuttavia, se in futuro si render� necessario re-installare\n"
-"Windows, il programma di installazione Microsoft riscriver� il settore di\n"
-"boot, e di conseguenza non sarete pi� in grado di avviare GNU/Linux!\n"
-"\n"
-" * se si verifica un problema per cui non potete pi� lanciare GNU/Linux dal\n"
-"disco rigido, questo dischetto sar� l'unico mezzo per avviare GNU/Linux:\n"
-"contiene un buon numero di programmi di amministrazione del sistema per\n"
-"rimettere in sesto un'installazione che ha subito abbia crash per\n"
-"un'interruzione di corrente, uno sfortunato errore di battitura, una\n"
-"password dimenticata o qualsiasi altra ragione.\n"
-"\n"
-"Quando cliccherete su \"S�\", vi verr� chiesto di inserire un disco in un\n"
-"lettore di floppy. Naturalmente il dischetto che utilizzerete deve essere\n"
-"vuoto o contenere soltanto dati di cui non avete pi� bisogno. Non sar�\n"
-"necessario formattarlo: DrakX riscriver� l'intero disco."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"A questo punto dovete scegliere dove installare il vostro sistema operativo\n"
-"Mandrake Linux sul disco rigido. Se il vostro disco � vuoto, oppure se un\n"
-"sistema operativo esistente sta usando tutto lo spazio disponibile, allora\n"
-"dovrete partizionarlo. In breve, partizionare un disco rigido consiste nel\n"
-"suddividerlo logicamente in maniera da creare lo spazio sufficiente per\n"
-"installare il vostro nuovo sistema operativo Mandrake Linux.\n"
-"\n"
-"Dato che gli effetti del partizionamento sono di solito irreversibili,\n"
-"questa operazione pu� intimidire e rivelarsi stressante per un utente\n"
-"inesperto. Fortunatamente, avete a vostra disposizione un assistente che\n"
-"semplifica questo passo. Prima di iniziare leggete attentamente il manuale,\n"
-"e prendete tutto il tempo che vi serve.\n"
-"\n"
-"Se state effettuando l'installazione in modalit� Esperto, verr� lanciato\n"
-"DiskDrake, il programma di gestione e partizionamento dei dischi rigidi di\n"
-"Mandrake Linux, che vi permetter� di configurare accuratamente le vostre\n"
-"partizioni. Consultate il capitolo relativo a DiskDrake nel manuale. Dal\n"
-"programma di installazione potete richiamare gli assistenti descritti qui\n"
-"di seguito cliccando sul pulsante \"Assistente\" (ingl. ''Wizard'').\n"
-"\n"
-"Se le partizioni sono gi� state definite (per una precedente installazione,\n"
-"o da un'altra utilit� di partizionamento), dovrete solo scegliere quelle da\n"
-"usare per installare il vostro sistema Linux.\n"
-"\n"
-"Se le partizioni non sono ancora state definite, dovete crearle usando\n"
-"l'assistente. In base alla configurazione del vostro disco rigido, saranno\n"
-"disponibili diverse soluzioni:\n"
-"\n"
-" * \"Usa spazio disponibile\": questa opzione causer� un partizionamento\n"
-"automatico del vostro disco rigido (o dischi, se ne avete pi� di uno). Non\n"
-"vi verr� posta nessun'altra domanda.\n"
-"\n"
-" * \"Usa partizioni esistenti\": l'assistente ha trovato una o pi�\n"
-"partizioni Linux sul vostro disco rigido. Se desiderate usarle scegliete\n"
-"questa opzione.\n"
-"\n"
-" * \"Usa lo spazio libero nella partizione Windows\": se MicrosoftWindows �\n"
-"installato sul vostro disco rigido e occupa tutto lo spazio disponibile,\n"
-"dovrete creare spazio libero per i dati relativi a Linux. Per farlo potete\n"
-"cancellare la vostra partizione MicrosoftWindows e i dati che contiene\n"
-"(usando le soluzioni \"Cancella l'intero disco\" o \"Modo Esperto\"),\n"
-"oppure ridimensionarla. Il ridimensionamento pu� essere effettuato evitando\n"
-"la perdita di dati a patto che prima di procedere la partizione Windows sia\n"
-"stata deframmentata. Vi raccomandiamo anche di fare un backup dei vostri\n"
-"dati. Questa � la soluzione consigliata se desiderate usare sia Mandrake\n"
-"Linux sia MicrosoftWindows sullo stesso computer.\n"
-"\n"
-"   Prima di scegliere questa opzione, tenete presente che la dimensione "
-"della\n"
-"partizione su cui risiede MicrosoftWindows sar� ridotta rispetto a quella\n"
-"attuale. Significa che avrete meno spazio libero per archiviare i vostri\n"
-"dati o installare nuovo software su Windows.\n"
-"\n"
-" * \"Cancella l'intero disco\": se desiderate cancellare tutti i dati e\n"
-"tutte le partizioni presenti sul vostro disco rigido e rimpiazzarli con il\n"
-"vostro nuovo sistema Mandrake Linux, potete selezionare questa opzione.\n"
-"Fate attenzione nello scegliere questa soluzione, dopo la conferma non\n"
-"potrete pi� tornare indietro.\n"
-"\n"
-"   !! Se scegliete questa opzione, tutti i dati sul vostro disco andranno\n"
-"persi. !!\n"
-"\n"
-" * \"Cancella Windows\": l'effetto di questa opzione sar� di cancellare\n"
-"tutto quello che si trova sul disco e di ricominciare da capo, creando le\n"
-"partizioni su un disco vuoto. Tutti i dati presenti sul vostro disco\n"
-"andranno persi.\n"
-"\n"
-"   !! Se scegliete questa opzione, tutti i dati sul vostro disco andranno\n"
-"persi. !!\n"
-"\n"
-" * \"Modo Esperto\": se volete partizionare manualmente il vostro disco\n"
-"rigido potete scegliere questa opzione. Fate attenzione prima di optare per\n"
-"questa soluzione: � potente, ma molto pericolosa. Potreste facilmente\n"
-"causare la perdita di tutti i vostri dati. Quindi, non scegliete questa\n"
-"soluzione se non sapete cosa state facendo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Ecco fatto: l'installazione � terminata, e il vostro sistema GNU/Linux �\n"
-"pronto per essere usato. Dovete soltanto cliccare sul pulsante \"OK\" per\n"
-"riavviare il sistema. Potete lanciare GNU/Linux o Windows (se presente),\n"
-"qualunque preferiate dei due, non appena il computer avr� terminato di\n"
-"effettuare il boot.\n"
-"\n"
-"Cliccando sul pulsante \"Avanzato\" (solo in modalit� Esperto) avrete altri\n"
-"due pulsanti a vostra disposizione:\n"
-"\n"
-" * \"Crea il floppy di auto installazione\": per creare un floppy di\n"
-"installazione che permette di eseguire automaticamente un' installazione\n"
-"completa, del tutto simile a quella che avete appena finito di configurare,\n"
-"senza che sia necessario l'intervento di un operatore.\n"
-"\n"
-"   Notate che, dopo aver cliccato sul pulsante, saranno disponibili due\n"
-"opzioni diverse:\n"
-"\n"
-"    * \"Ripeti\": questa � un'installazione automatizzata solo in parte, in\n"
-"quanto la fase di partizionamento del disco (e solo quella) resta\n"
-"interattiva.\n"
-"\n"
-"    * \"Automatizzata\": l'installazione � completamente automatizzata: il\n"
-"disco rigido viene riscritto per intero, tutti tutti i dati che contiene\n"
-"andranno persi.\n"
-"\n"
-"   Questa caratteristica � molto utile quando si deve installare il sistema "
-"su\n"
-"un gran numero di macchine dalle caratteristiche simili. Si veda la sezione\n"
-"Installazione automatica sul nostro sito web.\n"
-"\n"
-" * \"Salva scelta pacchetti\"(*): salva la selezione dei pacchetti\n"
-"effettuata in precedenza. Al momento di effettuare un'altra installazione,\n"
-"potrete inserire il dischetto nel lettore e installare il sistema\n"
-"richiamando lo schermo di aiuto (premendo [F1]) e digitando >>linux\n"
-"defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Sar� necessario un dischetto formattato con il filesystem FAT: per\n"
-"formattarne uno sotto GNU/Linux digitate \"mformat a:\""
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Qualsiasi partizione appena definita deve essere formattata prima di poter\n"
-"essere usata (formattare significa creare un filesystem).\n"
-"\n"
-"Potreste anche voler riformattare alcune partizioni preesistenti, per\n"
-"cancellare i dati che contengono. Se desiderate farlo, scegliete qui le\n"
-"partizioni che intendete formattare.\n"
-"\n"
-"Tenete presente che non � necessario riformattare tutte le partizioni\n"
-"preesistenti. Dovete formattare le partizioni che contengono il sistema\n"
-"operativo (come \"/\", \"/usr\" o \"/var\"), ma potete evitare di\n"
-"riformattare partizioni che contengono dati che desiderate conservare\n"
-"(tipicamente \"/home\").\n"
-"\n"
-"Fate molta attenzione nella scelta delle partizioni, dopo la formattazione\n"
-"tutti i dati saranno cancellati e non potrete recuperarli.\n"
-"\n"
-"Cliccate su \"Ok\" quando siete pronti a formattare le partizioni.\n"
-"\n"
-"Cliccate su \"Annulla\" se desiderate scegliere altre partizioni sulle\n"
-"quali installare il vostro nuovo sistema operativo Mandrake Linux.\n"
-"\n"
-"Cliccate su \"Avanzato\" se desiderate che le partizioni selezionate\n"
-"vengano controllate per accertare la presenza di eventuali blocchi\n"
-"danneggiati."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Il vostro sistema operativo Mandrake Linux � in corso d'installazione. In\n"
-"base al numero di pacchetti che devono essere installati e alla velocit�\n"
-"del vostro computer, questa operazione potrebbe durare pochi minuti o\n"
-"richiedere un tempo molto lungo.\n"
-"\n"
-"Abbiate pazienza, per favore."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"� molto probabile che, al momento in cui state installando Mandrake Linux,\n"
-"alcuni pacchetti siano stati aggiornati rispetto alla versione iniziale.\n"
-"Potrebbe trattarsi di un ''bug fix'', o della soluzione di problemi\n"
-"relativi alla sicurezza. Per permettervi di beneficiare di questi\n"
-"aggiornamenti vi verr� proposto di scaricare la nuova versione dei\n"
-"pacchetti usando Internet. Scegliete \"S�\" se potete contare su una\n"
-"connessione a Internet funzionante, oppure \"No\" se preferite installare i\n"
-"pacchetti aggiornati in un secondo momento.\n"
-"\n"
-"Se scegliete \"S�\" comparir� una lista di siti da cui � possibile\n"
-"scaricare i pacchetti aggiornati. Selezionate quello pi� vicino a voi. A\n"
-"questo punto comparir� una finestra di selezione pacchetti: controllate la\n"
-"lista e cliccate su \"Installa\" per scaricare e installare i pacchetti, o\n"
-"su \"Annulla\" per annullare l'operazione."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Prima di proseguire dovreste leggere con attenzione le condizioni d'uso;\n"
-"queste riguardano l'intera distribuzione Mandrake Linux, e se non siete\n"
-"d'accordo con qualche punto della licenza cliccate sul pulsante\n"
-"\"Rifiuta\": la procedura di installazione sar� immediatamente interrotta.\n"
-"Per proseguire con l'installazione, invece, cliccate sul pulsante\n"
-"\"Accetta\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Ora � il momento di scegliere il livello di sicurezza desiderato per il\n"
-"vostro sistema. Come regola generale, quanto pi� esposta � la macchina e\n"
-"quanto pi� sono importanti i dati che contiene, tanto pi� alto dovrebbe\n"
-"essere il livello di sicurezza. Tenete presente, tuttavia, che un livello\n"
-"di sicurezza molto alto in genere viene ottenuto a spese della facilit�\n"
-"d'uso. Consultate il capitolo MSEC nel ''Manuale di riferimento'' per avere\n"
-"ulteriori informazioni in merito al significato di tali livelli.\n"
-"\n"
-"Se non sapete cosa scegliere, mantenete l'opzione predefinita."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"A questo punto, dovete decidere quali partizioni devono essere usate per\n"
-"l'installazione del vostro sistema Mandrake Linux. Se sono gi� state\n"
-"definite delle partizioni, grazie a una precedente installazione di\n"
-"GNU/Linux o usando un altro programma di partizionamento, potete utilizzare\n"
-"le partizioni esistenti. In caso contrario, sar� necessario creare o\n"
-"modificare le partizioni del disco rigido.\n"
-"\n"
-"Per creare delle partizioni dovete, per prima cosa, selezionare un disco\n"
-"rigido. Potete scegliere il disco da partizionare cliccando su \"hda\" per\n"
-"il primo disco IDE, \"hdb\" per il secondo, \"sda\" per il primo disco\n"
-"SCSI, e cos� via.\n"
-"\n"
-"Per partizionare il disco selezionato potete scegliere fra queste opzioni:\n"
-"\n"
-" * \"Cancella tutto\": questa opzione cancella tutte le partizioni presenti\n"
-"sul disco selezionato.\n"
-"\n"
-" * \"Alloca automaticamente\": questa opzione vi permette di creare\n"
-"automaticamente partizioni di sistema e di swap nello spazio libero\n"
-"presente sul vostro disco rigido.\n"
-"\n"
-" * \"Ancora\": permette di accedere a funzionalit� avanzate:\n"
-"\n"
-"    * \"Salva tabella delle partizioni\": salva la tabella delle partizioni "
-"su\n"
-"un floppy. Utile per recuperarla in un momento successivo, se necessario.\n"
-"Vi raccomandiamo caldamente di effettuare questa operazione.\n"
-"\n"
-"    * \"Ripristina tabella delle partizioni\": permette di ripristinare una\n"
-"tabella delle partizioni precedentemente salvata su floppy disk.\n"
-"\n"
-"    * \"Recupera tabella delle partizioni\": se la vostra tabella delle\n"
-"partizioni � danneggiata potete provare a recuperarla grazie a questa\n"
-"opzione. Procedete con attenzione, e ricordate che potrebbe non avere\n"
-"successo.\n"
-"\n"
-"    * \"Ricarica tabella delle partizioni\": annulla tutte le modifiche e\n"
-"ricarica la tabella delle partizioni originaria.\n"
-"\n"
-"    * \"Removable media automounting\": se disabilitate questa opzione gli\n"
-"utenti saranno costretti a montare e smontare manualmente i dispositivi\n"
-"rimovibili come lettori floppy e CD-ROM.\n"
-"\n"
-" * \"Assistente\": usate questa opzione se desiderate che il "
-"partizionamento\n"
-"del disco sia effettuato con l'aiuto di un assistente. Altamente\n"
-"raccomandata se non avete una buona conoscenza del partizionamento.\n"
-"\n"
-" * \"Un passo indietro\": con questa opzione le modifiche apportate "
-"verranno\n"
-"annullate.\n"
-"\n"
-" * \"Passa a modo Esperto\": permette di effettuare ulteriori azioni sulle\n"
-"partizioni (tipo, opzioni, formattazione) e offre pi� informazioni.\n"
-"\n"
-" * \"Fatto\": quando avrete finito il partizionamento del disco cliccate su\n"
-"questa opzione, le vostre modifiche verranno salvate sul disco.\n"
-"\n"
-"Si noti che � possibile raggiungere ogni opzione usando la tastiera. Per\n"
-"spostarvi fra le partizioni usate i tasti [Tab] e le frecce [S�/Gi�].\n"
-"\n"
-"Dopo aver selezionato una partizione potete usare:\n"
-"\n"
-" * Ctrl-c per creare una nuova partizione (se avete selezionato una\n"
-"partizione vuota);\n"
-"\n"
-" * Ctrl-d per cancellare una partizione;\n"
-"\n"
-" * Ctrl-m per impostare il punto di mount.\n"
-"\n"
-"Per ottenere informazioni in merito ai diversi tipi di filesystem\n"
-"disponibili, consultate il capitolo ext2fs del ''Reference Manual''.\n"
-"\n"
-"Se state effettuando l'installazione su una macchina PPC, sar� necessario\n"
-"creare una piccola partizione HFS di almeno 11MB, che verr� utilizzata dal\n"
-"bootloader yaboot. Se decidete di creare una partizione pi� grande, diciamo\n"
-"sui 50MB, potrebbe rappresentare un utile deposito dove conservare un\n"
-"kernel di riserva e immagini di ''ramdisk'' da utilizzare in caso di\n"
-"emergenza."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Sul vostro disco rigido � stata individuata pi� di una partizione\n"
-"MicrosoftWindows. Per favore, scegliete quella che deve essere\n"
-"ridimensionata in modo da poter installare il vostro nuovo sistema\n"
-"operativo Mandrake Linux.\n"
-"\n"
-"Ogni partizione viene elencata come segue: \"nome Linux\", \"nome Windows\"\n"
-"\"Capacit�\".\n"
-"\n"
-"Il \"nome Linux\" � strutturato in: \"tipo di disco rigido\", \"numero del\n"
-"disco\", \"numero della partizione\" (ad esempio, \"hda1\").\n"
-"\n"
-"Il \"tipo di disco rigido\" � \"hd\" se il vostro disco � di tipo IDE, e\n"
-"\"sd\" se, invece, � un disco SCSI.\n"
-"\n"
-"Il \"numero del disco\" � sempre una lettera che segue \"hd\" o \"sd\". Per\n"
-"i dischi IDE:\n"
-"\n"
-" * \"a\" significa \"disco rigido master sul controller IDE primario\",\n"
-"\n"
-" * \"b\" means \"disco rigido slave sul controller IDE primario\";\n"
-"\n"
-" * \"c\" means \"disco rigido master sul controller IDE secondario\";\n"
-"\n"
-" * \"d\" means \"disco rigido slave sul controller IDE secondario\".\n"
-"\n"
-"Per i dischi rigidi di tipo SCSI, invece, una \"a\" significa \"ID SCSI\n"
-"pi�\", una \"b\" significa \"ID SCSI superiore ad a\", etc.\n"
-"\n"
-"Il \"nome Windows\" � la lettera che corrisponde al vostro disco rigido\n"
-"sotto Windows (il primo disco o partizione � chiamato \"C:\")."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-"Per favore siate pazienti. Questa operazione pu� richiedere diversi minuti."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"A questo punto DrakX deve sapere se intendete effettuare un'installazione\n"
-"in modalit� predefinita (\"Raccomandata\") o se preferite avere un maggior\n"
-"controllo su di essa (\"Esperto\"). Inoltre potete scegliere se effettuare\n"
-"una nuova installazione o un aggiornamento di un sistema Mandrake Linux\n"
-"esistente:\n"
-"\n"
-" * \"Installazione\" Cancella completamente il vecchio sistema. A seconda "
-"di\n"
-"come � strutturato il sistema preesistente potrete mantenere inalterate\n"
-"alcune delle vecchie partizioni (Linux e altre).\n"
-"\n"
-" * \"Aggiornamento\" Questo tipo di installazione vi permette di effettuare\n"
-"un semplice aggiornamento dei pacchetti installati sul vostro sistema\n"
-"Mandrake Linux. Conserva tutte le partizioni attuali del disco rigido, come\n"
-"pure le configurazioni individuali degli utenti. Tutti gli altri passi\n"
-"relativi alla configurazione verranno effettuati come per una installazione\n"
-"da zero.\n"
-"\n"
-" * \"Solo aggiornamento pacchetti\" Questa nuovissima opzione vi permette "
-"di\n"
-"aggiornare un sistema Mandrake Linux esistente lasciando intatta la\n"
-"configurazione globale del sistema. � anche possibile aggiungere nuovi\n"
-"pacchetti all'installazione corrente.\n"
-"\n"
-"Gli aggiornamenti dovrebbe svolgersi senza difficolt� per sistemi Mandrake\n"
-"Linux a partire dalla versione \"8.1\".\n"
-"\n"
-"Scegliete una delle seguenti modalit� di installazione, in base alla vostra\n"
-"conoscenza di GNU/Linux:\n"
-"\n"
-" * Raccomandata: se non avete mai installato il sistema operativo GNU/"
-"Linux,\n"
-"scegliete questa modalit�. L'installazione sar� molto semplice e vi\n"
-"verranno poste solo poche domande;\n"
-"\n"
-" * Esperto: se avete abbastanza familiarit� con GNU/Linux potete scegliere\n"
-"questa modalit�, che vi permetter� di effettuare un'installazione altamente\n"
-"personalizzata. Rispondere ad alcune delle domande che vi verranno poste\n"
-"potrebbe essere difficile se non avete una buona conoscenza di GNU/Linux,\n"
-"pertanto non fate questa scelta se non sapete bene quello che state\n"
-"facendo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalmente DrakX provvede a individuare automaticamente la tastiera\n"
-"corretta (in base alla lingua che avete scelto) e voi non vedrete nemmeno\n"
-"questo passo. Tuttavia, potreste avere una tastiera che non corrisponde\n"
-"esattamente alla vostra lingua: se siete un francese che parla italiano, ad\n"
-"esempio, potreste comunque preferire una tastiera francese. Oppure, se\n"
-"parlate italiano ma vivete nel Qu�bec, potreste trovarvi nella stessa\n"
-"situazione. In entrambi i casi, dovrete tornare a questa fase\n"
-"dell'installazione e selezionare una tastiera appropriata dalla lista.\n"
-"\n"
-"Cliccate sul pulsante \"Avanzato\" per vedere una lista completa delle\n"
-"tastiere supportate."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Scegliete la lingua che intendete usare per l'installazione e l'uso del\n"
-"sistema.\n"
-"\n"
-"Cliccando sul pulsante \"Avanzato\" potrete scegliere altre lingue da\n"
-"installare sul vostro computer. La selezione di altre lingue comporta\n"
-"l'installazione dei file relativi alla documentazione e alle applicazioni\n"
-"per ciascuna di esse. Se il vostro computer dovr� essere usato, ad esempio,\n"
-"anche da persone di madre lingua spagnola, potete scegliere l'italiano come\n"
-"lingua principale nella struttura ad albero e, nella sezione \"Avanzato\",\n"
-"apporre un segno di spunta sul pulsante grigio corrispondente a\n"
-"\"Spanish|Spain\".\n"
-"\n"
-"� possibile installare i file per pi� lingue allo stesso tempo. Dopo aver\n"
-"scelto quelle che preferite cliccate sul pulsante \"Ok\" per continuare."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"In genere DrakX individua automaticamente il numero di pulsanti presente\n"
-"sul vostro mouse, in caso contrario conclude che il vostro mouse � un mouse\n"
-"a due tasti e lo imposta in modo da emulare il terzo tasto. DrakX, inoltre,\n"
-"riconosce automaticamente se si tratta di un mouse PS/2, seriale o USB.\n"
-"\n"
-"Se volete specificare un diverso tipo di mouse, scegliete il vostro modello\n"
-"dall'elenco che vi viene proposto.\n"
-"\n"
-"Se scegliete un mouse diverso dal tipo predefinito, vi verr� mostrata una\n"
-"finestra dove potrete provarlo. Provate sia i pulsanti che l'eventuale\n"
-"rotellina per controllare che la configurazione sia corretta. Se il mouse\n"
-"non funziona correttamente, premete la barra spaziatrice o il tasto [Invio]\n"
-"per premere il pulsante \"Annulla\" ed effettuare una nuova scelta."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Scegliete la porta appropriata. La porta \"COM1\" sotto Windows, ad\n"
-"esempio, � chiamata \"ttyS0\" sotto GNU/Linux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Questo � il punto pi� critico per la sicurezza del vostro sistema\n"
-"GNU/Linux: state per decidere la password di \"root\". \"root\" �\n"
-"l'amministratore del sistema, ed � l'unico utente autorizzato a compiere\n"
-"aggiornamenti, aggiungere altri utenti, cambiare la configurazione globale\n"
-"del sistema, etc. In breve, pu� fare tutto ci� che vuole! Questo � il\n"
-"motivo per cui dovete scegliere una password che sia difficile da\n"
-"indovinare: DrakX vi dir� se � troppo facile. Potete anche scegliere di non\n"
-"digitare una password, ma noi vi consigliamo caldamente di farlo, almeno\n"
-"per un motivo: non pensate che, avviando il sistema con GNU/Linux, gli\n"
-"altri sistemi operativi che convivono con esso sulla stessa macchina siano\n"
-"al sicuro da errori; al contrario: \"root\" pu� scavalcare ogni limitazione\n"
-"e (magari involontariamente) cancellare tutti i dati presenti sulle\n"
-"partizioni accedendo in maniera scorretta a queste ultime! Quindi � molto\n"
-"importante che sia difficile per gli utenti normali diventare \"root\".\n"
-"\n"
-"La password ideale � costituita da un insieme di caratteri alfanumerici\n"
-"lungo almeno 8 caratteri. Non scrivete mai su qualche appunto la password\n"
-"di \"root\", renderebbe troppo facile l'accesso al sistema da parte di\n"
-"estranei.\n"
-"\n"
-"Prestate attenzione, tuttavia, a non scegliere una password troppo lunga o\n"
-"complicata, perch� dovete essere in grado di ricordarla senza troppo\n"
-"sforzo.\n"
-"\n"
-"La password non verr� mostrata mentre la digitate. Per questo motivo �\n"
-"necessario che venga inserita due volte, per ridurre il rischio di un\n"
-"errore di battitura. Se per caso commettete lo stesso errore due volte,\n"
-"questa password \"scorretta\" sar� quella che verr� richiesta la prima\n"
-"volta che vi connetterete al sistema.\n"
-"\n"
-"In modalit� Esperto vi verr� chiesto se il vostro computer � connesso a un\n"
-"server di autenticazione, secondo il protocollo NIS o LDAP.\n"
-"\n"
-"Se la vostra rete si basa sul protocollo LDAP (o NIS) per l'autenticazione,\n"
-"selezionate il pulsante \"LDAP\" (o \"NIS\") per effettuare\n"
-"l'autenticazione. Se non siete sicuri, chiedete al vostro amministratore di\n"
-"rete.\n"
-"\n"
-"Se il vostro computer non � connesso a una rete soggetta ad autenticazione,\n"
-"scegliete \"File locali\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO e grub sono due ''bootloader'' di GNU/Linux. Un bootloader � un\n"
-"programma per l'avvio di uno o pi� sistemi operativi. Questa fase, in\n"
-"genere, � del tutto automatica; DrakX, infatti, analizza il settore di boot\n"
-"del disco, e si comporta in base a quello che vi trova:\n"
-"\n"
-" * se trova un settore di boot di Windows, lo rimpiazza con un settore di\n"
-"boot di grub o LILO, in modo da permettervi di lanciare GNU/Linux o un\n"
-"altro OS;\n"
-"\n"
-" * se trova un settore di boot di grub o LILO, lo sostituisce con uno "
-"nuovo.\n"
-"\n"
-"In caso di dubbio, DrakX mostrer� una finestra di dialogo con varie\n"
-"opzioni:\n"
-"\n"
-" * \"Bootloader da usare\": avete tre scelte a disposizione:\n"
-"\n"
-"    * \"GRUB\": se preferite grub (menu in modo testo);\n"
-"\n"
-"    * \"LILO con menu grafico\": se preferite LILO con la sua interfaccia\n"
-"grafica;\n"
-"\n"
-"    * \"LILO con menu in modo testo\": se preferite LILO nella sua versione "
-"con\n"
-"menu in modo testo.\n"
-"\n"
-" * \"Dispositivo di boot\": nella maggior parte dei casi non sar� "
-"necessario\n"
-"cambiare le impostazioni predefinite (\"/dev/hda\"), ma, se lo preferite,\n"
-"il bootloader pu� essere installato sul secondo disco rigido\n"
-"(\"/dev/hdb\"), o persino su un floppy (\"/dev/fd0\");\n"
-"\n"
-" * \"Ritardo prima di avviare con l'immagine predefinita\": � il tempo\n"
-"lasciato all'utente per scegliere una voce diversa da quella predefinita\n"
-"nel menu del bootloader.\n"
-"\n"
-"!! Prestate particolare attenzione al fatto che, se scegliete di non\n"
-"installare un bootloader (scegliendo \"Annulla\" nella finestra di cui\n"
-"sopra), dovete essere sicuri di poter avviare il vostro sistema Mandrake\n"
-"Linux in altro modo! Accertatevi anche di sapere quello che fate se\n"
-"modificate qualcuna delle opzioni. !!\n"
-"\n"
-"Cliccando sul pulsante \"Avanzato\" di questa finestra avrete la\n"
-"possibilit� di scegliere tra molte opzioni avanzate, riservate agli utenti\n"
-"esperti.\n"
-"\n"
-"Dopo aver configurato i parametri generali del bootloader, verr� mostra la\n"
-"lista delle opzioni disponibili al momento del boot.\n"
-"\n"
-"Se sulla vostra macchina � gi� installato un altro sistema operativo,\n"
-"quest'ultimo verr� automaticamente aggiunto al menu di avvio. Potete anche\n"
-"scegliere di configurare con precisione le opzioni esistenti: selezionate\n"
-"una voce e cliccate su \"Modifica\" per modificarne i parametri o\n"
-"rimuoverla; \"Aggiungi\" crea una nuova voce, mentre cliccando su \"Fatto\"\n"
-"passerete alla fase di installazione successiva."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO�(il�LInux�LOader)�e GRUB sono bootloader: sono in grado di caricare\n"
-"indifferentemente GNU/Linux o altri sistemi operativi presenti sul vostro\n"
-"computer. Normalmente, questi sistemi operativi sono correttamente rilevati\n"
-"e installati. Se non avviene, potete aggiungere una voce a mano in questo\n"
-"schermo. State attenti a scegliere i parametri corretti.\n"
-"\n"
-"Potreste anche non voler dare l'accesso a questi sistemi operativi a\n"
-"chiunque, nel qual caso potete cancellare le voci corrispondenti, ma in\n"
-"questo caso avrete bisogno di un boot disk per caricarli!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Dovete adesso indicare dove volete che vengano collocate le informazioni\n"
-"necessarie per effettuare il boot con GNU/Linux.\n"
-"\n"
-"A meno che non sappiate esattamente quello che state facendo, scegliete\n"
-"\"Primo settore del disco rigido (MBR)\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Qui potrete scegliere il sistema di stampa da usare con questo computer.\n"
-"Altri sistemi operativi possono offrirvene uno, ma Mandrake Linux ve ne\n"
-"offre ben tre.\n"
-"\n"
-" * \"pdq\" che sta per ''print, don't queue'' (''stampa, non mettere in\n"
-"coda''), � una buona scelta se avete una connessione diretta con la\n"
-"stampante e volete essere in grado di risolvere rapidamente eventuali\n"
-"inceppamenti della carta, e inoltre non avete altre stampanti connesse via\n"
-"rete. Infatti pu� gestire solo connessioni di rete molto semplici ed �\n"
-"comunque piuttosto lento in quest'ultimo caso. Scegliete \"pdq\" se questa\n"
-"� la vostra prima volta con GNU/Linux. Potrete cambiare la vostra scelta\n"
-"dopo aver terminato l'installazione lanciando PrinterDrake dal Centro di\n"
-"controllo Mandrake e cliccando sul pulsante Esperto.\n"
-"\n"
-" * \"CUPS\"''Common Unix Printing System'' (''Sistema di stampa unificato\n"
-"per Unix''), offre risultati eccellenti sia che dobbiate stampare sulla\n"
-"vostra stampante locale, sia nel caso che la stampa debba essere effettuata\n"
-"sull'altra faccia del pianeta. � semplice da usare e pu� agire come server\n"
-"o client per il vecchio sistema di stampa \"lpd\". Infatti � compatibile\n"
-"con i sistemi precedenti. Ha molte frecce al suo arco, ma la configurazione\n"
-"basica � quasi altrettanto semplice di quella per \"pdq\". Se avete bisogno\n"
-"di emulare un server \"lpd\" dovete attivare il demone \"cups-lpd\".\n"
-"Dispone di interfaccia grafica per la stampa e per la configurazione delle\n"
-"opzioni della stampante.\n"
-"\n"
-" * \"lprNG\"''line printer daemon New Generation'' (''demone di stampa di\n"
-"nuova generazione''. Questo sistema � approssimativamente equivalente agli\n"
-"altri, ma � anche in grado di stampare su dispositivi collegati per mezzo\n"
-"di una rete Novell, dato che supporta il protocollo IPX, e pu� stampare\n"
-"direttamente in base a comandi via shell. Se avete bisogno di una\n"
-"connessione di tipo Novell, o di stampare senza fare uso di pipe,\n"
-"utilizzate lprNG. In caso contrario, � preferibile usare CUPS dato che �\n"
-"pi� semplice e migliore nel gestire stampanti di rete."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"Ora DrakX proceder� con il rilevamento di tutti i dischi rigidi e altri\n"
-"dispositivi IDE presenti sul vostro computer, e cercher� anche di stabilire\n"
-"se sul vostro sistema sono presenti una o pi� schede SCSI di tipo PCI. Se\n"
-"verr� individuato un dispositivo di questo tipo, DrakX installer�\n"
-"automaticamente il driver appropriato.\n"
-"\n"
-"Dato che il riconoscimento automatico in alcuni casi potrebbe non riuscire\n"
-"a individuare una particolare periferica, vi verr� comunque chiesto se\n"
-"avete una scheda SCSI PCI diversa da quelle eventualmente identificate\n"
-"oppure no. Scegliete \"S�\" se siete sicuri che nel vostro computer �\n"
-"presente un'altra scheda SCSI: potrete scegliere la vostra scheda da una\n"
-"lista. Scegliete \"No\" se non disponete di nessun tipo di hardware SCSI, o\n"
-"se siete soddisfatti del riconoscimento automatico. Se non siete sicuri,\n"
-"potete anche controllare la lista dell'hardware rilevato nella vostra\n"
-"macchina selezionando \"Vedi informazioni hardware\" e cliccando su \"Ok\".\n"
-"Controllate l'elenco dell'hardware individuato e poi cliccate sul pulsante\n"
-"\"Ok\" per ritornare alla domanda relativa alla scheda SCSI.\n"
-"\n"
-"Se sarete costretti a specificare manualmente il tipo di scheda in vostro\n"
-"possesso, DrakX vi chieder� se intendete indicare delle opzioni da usare\n"
-"con essa. Vi consigliamo di permettere a DrakX di esaminare l'hardware per\n"
-"stabilire le particolari opzioni della scheda che dovranno essere usate\n"
-"all'inizializzazione; questo metodo in genere permette di ottenere buoni\n"
-"risultati.\n"
-"\n"
-"Se DrakX non riesce a stabilire quali sono le opzioni da passare alla\n"
-"scheda, dovrete specificarle manualmente. Consultate il ''Manuale\n"
-"dell'utente'' (capitolo 3, paragrafo \"Ricerca di informazioni sul vostro\n"
-"hardware\") per qualche suggerimento su come ottenerle dalla documentazione\n"
-"dell'hardware, dal sito web del produttore (se disponete di un accesso a\n"
-"Internet) o da MicrosoftWindows (se avete utilizzato la stessa scheda con\n"
-"Windows sul vostro stesso sistema)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot � un bootloader per hardware NewWorld MacIntosh. � in grado di\n"
-"avviare GNU/Linux, MacOS, o MacOSX, se presenti sul vostro computer.\n"
-"Normalmente gli altri sistemi operativi sono identificati e installati\n"
-"correttamente. Se cos� non fosse, potete aggiungere manualmente una voce\n"
-"in questa schermata. Accertatevi di scegliere i parametri corretti.\n"
-"\n"
-"\n"
-"Le opzioni principali di Yaboot sono:\n"
-"\n"
-"\n"
-"  - Init Message: un semplice messaggio di testo che viene mostrato prima\n"
-"del prompt di boot.\n"
-"\n"
-"\n"
-"  - Boot Device: specificate dove si trovano le informazioni richieste per \n"
-"avviare GNU/Linux. In genere � necessario prima impostare una partizione "
-"di \n"
-"bootstrap che contenga queste informazioni.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: a differenza di LILO, sono possibili due pause \n"
-"diverse. La prima si misura in secondi, e a questo punto potete scegliere \n"
-"CD, OF boot, MacOS, o Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: questa pausa � simile all'attesa di LILO.  Dopo \n"
-"aver selezionato Linux, avrai a disposizione un'attesa misurata in decimi "
-"di\n"
-"secondo prima che venga selezionata la descrizione del kernel predefinita.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: selezionando questa opzione potrai scegliere 'C' per CD "
-"al\n"
-"primo avvio del sistema.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: selezionando questa opzione potrai scegliere 'N' per "
-"Open\n"
-"Firmware al primo avvio del sistema.\n"
-"\n"
-"\n"
-"  - Default OS: puoi scegliere qual � il SO predefinito da avviare quando "
-"termina \n"
-"la pausa dell'Open Firmware."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Qui sono riportati vari parametri relativi al vostro sistema. In base\n"
-"all'hardware installato, potrebbero essere visualizzate le seguenti voci:\n"
-"\n"
-" * \"Mouse\": controllate la configurazione attuale del mouse, e cliccate\n"
-"sul pulsante per cambiarla, se necessario;\n"
-"\n"
-" * \"Tastiera\": controllate l'attuale impostazione della tastiera, e\n"
-"cliccate sul pulsante per cambiarla, se necessario;\n"
-"\n"
-" * \"Fuso orario\": DrakX, come opzione predefinita, deduce il vostro fuso\n"
-"orario dalla lingua che avete scelto. Ma anche in questo caso, come per la\n"
-"scelta della tastiera, potreste non trovarvi nella nazione cui corrisponde\n"
-"la lingua che avete scelto; in tal caso sar� necessario cliccare su questo\n"
-"pulsante per poter configurare il fuso orario in base a quello dell'area\n"
-"geografica in cui vivete;\n"
-"\n"
-" * \"Stampante\": cliccando sul pulsante \"Nessuna stampante\" si "
-"richiamer�\n"
-"l'assistente di configurazione della stampante;\n"
-"\n"
-" * \"Scheda audio\": se sul vostro sistema � stata individuata una scheda\n"
-"audio, verr� mostrata qui. Al momento dell'installazione non � possibile\n"
-"apportare alcuna modifica;\n"
-"\n"
-" * \"Scheda TV\": se sul vostro sistema � stata individuata una scheda TV,\n"
-"verr� mostrata qui. Al momento dell'installazione non � possibile apportare\n"
-"alcuna modifica;\n"
-"\n"
-" * \"Scheda ISDN\": se sul vostro sistema � stata individuata una scheda\n"
-"ISDN, verr� mostrata qui. Potete cliccare sul pulsante relativo per\n"
-"cambiarne i parametri."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Scegliete il disco rigido che volete cancellare per poter installare la\n"
-"nuova partizione per Mandrake Linux. Attenzione! tutti i dati presenti\n"
-"andranno perduti e non saranno pi� recuperabili!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Cliccate sul pulsante \"OK\" se volete tutte le partizioni e i dati\n"
-"presenti su questo disco rigido. Prestate attenzione, dopo aver cliccato su\n"
-"\"OK\" non potrete pi� recuperare le partizioni e i dati presenti sul\n"
-"disco, compresi eventuali dati di Windows.\n"
-"\n"
-"Cliccate su \"Annulla\" per annullare questa operazione senza che vengano\n"
-"persi dati o partizioni presenti su questo disco rigido."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Non riesco ad accedere ai moduli del kernel corrispondenti al vostro kernel "
-"(il file %s � assente), questo in genere significa che il vostro dischetto "
-"di boot non � aggiornato rispetto al supporto di installazione. Per favore "
-"create un dischetto di boot aggiornato."
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Dovete formattare anche %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Hai selezionato i seguenti server: %s\n"
-"\n"
-"\n"
-"Questi server verranno attivati automaticamente. Non presenta problemi di\n"
-"sicurezza conosciuti, ma potrebbero esserne scoperti di nuovi. In tal caso,\n"
-" accertati di effettuare un aggiornamento non appena possibile.\n"
-"\n"
-"\n"
-"Vuoi davvero installare questi server?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Non posso usare broadcast senza un dominio NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inserisci un floppy MS-DOS nel drive %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Questo floppy non � stato formattato usando MS DOS/Windows"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Per usare la selezione di pacchetti che avete salvato, dovete cominciare "
-"l'installazione digitando ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Errore leggendo il file %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Parte dell'hardware del tuo computer richiede drivers ''proprietari'' per\n"
-"funzionare. Puoi trovare informazioni al riguardo presso: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Devi avere una partizione radice.\n"
-"A questo scopo, crea una partizione (o clicca su una gi� esistente).\n"
-"Quindi clicca su \"Punto di mount\" e assegna '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Devi avere una partizione di swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Non hai una partizione di swap\n"
-"\n"
-"Continuo comunque?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Devi avere una partizione FAT montata su /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Usa lo spazio libero"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Non c'� abbastanza spazio libero per allocare nuove partizioni"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Usa partizione esistente"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Non c'� una partizione esistente da usare"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Usa la partizione Windows per loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Che partizione vuoi usare per Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Scegli le dimensioni"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Dimensione partizione radice in Mb: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Dimensione partizione di swap in Mb: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Usa lo spazio libero della partizione Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Quale partizione vuoi ridimensionare?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Calcolo i confini del filesystem di Windows "
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Il ridimensionatore della FAT non riesce a gestire la tua partizione, \n"
-"si � verificato il seguente errore: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"La tua partizione Windows � troppo frammentata, per favore prima\n"
-"lancia ''defrag''"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATTENZIONE!\n"
-"\n"
-"DrakX ora ridimensioner� la tua partizione Windows. Stai attento: questa\n"
-"operazione � pericolosa. Se non lo hai gi� fatto, dovresti prima uscire\n"
-"dall'installazione, lanciare scandisk sotto Windows (e opzionalmente "
-"defrag),\n"
-"e poi riavviare l'installazione. Dovresti anche fare il backup dei tuoi "
-"dati.\n"
-"Quando sei sicuro, premi Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Quanto spazio vuoi lasciare per Windows sulla"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partizione %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Ridimensionamento FAT fallito: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Non c'� una partizione FAT da ridimensionare o da usare come loopback (o \n"
-"non c'� abbastanza spazio su di essa)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Cancella l'intero disco"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Rimuovi Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Hai pi� di un disco rigido, su quale vuoi installare linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"TUTTE le partizioni esistenti e i loro dati verranno persi sul disco %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Partizionamento personalizzato del disco"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Usa fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Adesso puoi partizionare %s\n"
-"Quando hai finito, non dimenticare di salvare usando 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Non hai sufficiente spazio libero sulla partizione Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Non trovo lo spazio per installare Mandrake Linux"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"Il wizard di partizionamento di DrakX ha trovato le seguenti soluzioni:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partizionamento fallito: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Sto attivando la rete"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Sto disattivando la rete"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"C'� stato un errore, ma non so come gestirlo correttamente.\n"
-"Continua a tuo rischio e pericolo."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punto di mount doppio: %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Alcuni pacchetti importanti non sono stati installati correttamente.\n"
-"O il lettore di cdrom o il tuo cdrom sono danneggiati.\n"
-"Controlla il cdrom su un sistema gi� installato digitando \"rpm -qpl "
-"mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Benvenuto a %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nessun drive floppy disponibile"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Inizio fase '%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Il tuo sistema ha poche risorse. Potresti avere problemi installando\n"
-"Mandrake Linux. In tal caso, in alternativa puoi provare un'installazione \n"
-"testuale. Per questo, premi 'F1' all'avvio da CDROM, poi digita 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Classe d'installazione"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Per favore, scegli una delle seguenti classi d'installazione:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"La dimensione totale dei gruppi da te scelti � approssimativamente %d Mb.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se desideri installare occupando una quantit� di spazio minore,\n"
-"scegli la percentuale dei pacchetti che vuoi installare.\n"
-"\n"
-"Una bassa percentuale installer� solo i pacchetti pi� importanti;\n"
-"una percentuale del 100%% installer� tutti i pacchetti scelti."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Hai spazio sul tuo disco rigido solo per %d%% di questi pacchetti.\n"
-"\n"
-"Scegli una percentuale dei pacchetti che vuoi installare.\n"
-"Una bassa percentuale installer� solo i pacchetti pi� importanti;\n"
-"una percentuale del %d%% installer� tutti i pacchetti possibili."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Potrai scegliere pi� specificatamente nella prossima fase."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentuale dei pacchetti da installare"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Selezione Gruppi di Pacchetti"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Selezione individuale pacchetti"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Domensione totale: %d / %d Mb"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pacchetto errato"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nome: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versione: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Dimensioni: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importanza: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Non puoi selezionare questo pacchetto perch� non c'� abbastanza spazio \n"
-"rimanente per installarlo"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "I seguenti pacchetti stanno per essere installati"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "I seguenti pacchetti satanno per essere rimossi"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Non puoi selezionare/deselezionare questo pacchetto"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Questo � un pacchetto obbligatorio, non pu� essere deselezionato"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Non puoi deselezionare questo pacchetto. � gi� installato"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Questo pacchetto deve essere aggiornato\n"
-"Sei sicuro di volerlo deselezionare?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Non puoi deselezionare questo pacchetto. Deve essere aggiornato"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Mostra i pacchetti selezionati automaticamente"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installa"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Carica/Salva su floppy"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Aggiornamento scelta pacchetti"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Installazione minima"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Scegli i pacchetti da installare"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Installazione"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Sto valutando"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tempo restante "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Per favore attendi, sto preparando l'installazione"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pacchetti"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installazione del pacchetto %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Accetta"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Rifiuta"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Sostituisci il Cd-Rom!\n"
-"\n"
-"Per favore inserisci il Cd-Rom chiamato \"%s\" nel tuo lettore e premi Ok "
-"quando\n"
-"pronto. Se non ce l'hai, premi Annulla per evitare l'installazione da questo "
-"Cd-Rom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Vado avanti comunque?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "C'� stato un errore ordinando i pacchetti:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "C'� stato un errore installando i pacchetti:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Attenzione\n"
-"\n"
-"Per favore leggete con attenzione il documento che segue.\n"
-"Se non siete d'accordo con una qualsiasi parte, non potete installare il CD\n"
-"successivo. Premete 'Rifiuta' per continuare l'installazione senza di esso.\n"
-"\n"
-"\n"
-"Alcune componenti software contenute nel CD successivo non sono\n"
-"soggette alla licenza GPL o a licenze simili. Ciascuna di tali componenti\n"
-"� pertanto soggetta ai termini e alle condizioni della propria\n"
-"licenza specifica. Per favore leggete con attenzione e attenetevi a tali\n"
-"licenze specifiche prima di usare o redistribuire tali\n"
-"componenti software. Tali licenze in genere proibiscono\n"
-"il trasferimento, la duplicazione (eccetto che per scopi di backup),\n"
-"la redistribuzione, il reverse engineering, il deassemblaggio,\n"
-"la decompilazione o la modifica della componente in questione.\n"
-"Qualunque infrazione del contratto porter� alla immediata cancellazione dei "
-"vostri\n"
-"diritti per quanto riguarda la specifica licenza.\n"
-"A meno che la licenza specifica non vi accordi tali diritti,\n"
-"in genere non potete installare i programmi su pi� di un computer, o "
-"adattarlo in\n"
-"modo che possa essere usato su una rete. In caso di\n"
-"dubbio, per favore contattate direttamente il distributore\n"
-"o il curatore della componente. Il trasferimento a terzi o la copia di tali\n"
-"componenti, documentazione inclusa, � in genere proibito.\n"
-"\n"
-"\n"
-"Tutti i diritti relativi alle componenti del CD successivo appartengono ai\n"
-"loro rispettivi autori e sono protetti dalle leggi relative alla propriet� "
-"intellettuale\n"
-"e al copyright applicabili ai programmi software.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Si � verificato un errore"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Vuoi davvero abbandonare l'installazione?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Accordo di licenza"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduzione\n"
-"\n"
-"Nel seguito intendiamo con \"Software\" il sistema operativo e le diverse "
-"componenti disponibili\n"
-"nella distribuzione Mandrake Linux. Il Software include, ma non � limitato "
-"a, l'insieme di\n"
-"programmi, metodi, regole e documentazione relativi al sistema operativo e "
-"alle diverse componenti\n"
-"della distribuzione Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licenza\n"
-"\n"
-"Per favore leggete con attenzione questo documento.\n"
-"Questo documento costituisce un contratto fra voi e la MandrakeSoft S.A. per "
-"quanto riguarda l'uso del Software. L'azione di installare, duplicare o "
-"usare in qualsiasi modo il Software implica l'esplicita accettazione e il "
-"pieno consenso ad adeguarsi ai termini e alle condizioni di questa Licenza. "
-"Se non siete d'accordo con uno o pi� punti della Licenza, non avete "
-"l'autorizzazione a installare, duplicare o utilizzare il Software. Qualunque "
-"tentativo di installare, duplicare o utilizzare il Software in modi non "
-"conformi ai termini e alle condizioni della Licenza porter� automaticamente "
-"all'annullamento della licenza e alla revoca dei vostri diritti ai sensi "
-"della stessa. Una volta invalidata la Licenza, avete l'obbligo di "
-"distruggere immediatamente tutte le copie del Software in vostro possesso.\n"
-"\n"
-"\n"
-"2. Garanzia e limiti della garanzia\n"
-"\n"
-"Il Software e la documentazione allegata sono forniti \"come sono\", senza "
-"nessuna garanzia, nei limiti permessi dalla legge. In nessun caso, e nei "
-"limiti permessi dalla legge, la MandrakeSoft S.A. potr� essere ritenuta "
-"responsabile per un qualsiasi danno, speciale, accidentale, diretto o "
-"indiretto (inclusi, senza limitazioni, danni dovuti alla perdita di attivit� "
-"commerciali, interruzioni dell'attivit� commerciale, perdite finanziarie, "
-"oneri legali e sanzioni pecuniarie che derivino da sentenze giudiziarie, o "
-"qualsiasi altra perdita conseguente), dovuto all'utilizzo o "
-"all'impossibilit� di utilizzo del Software, anche nel caso in cui "
-"MandrakeSoft S.A. sia stata avvertita della possibilit� che si verificassero "
-"tali danni.\n"
-"\n"
-"RESPONSABILIT� LIMITATA IN RELAZIONE AL POSSESSO O ALL'USO DI SOFTWARE "
-"PROIBITO IN ALCUNE NAZIONI\n"
-"\n"
-"Nei limiti di legge, in nessun caso MandrakeSoft S.A. o i suoi distributori "
-"potranno essere ritenuti responsabili per un qualsiasi danno, speciale, "
-"accidentale, diretto o indiretto (inclusi, senza limitazioni, danni dovuti "
-"alla perdita di attivit� commerciali, interruzioni dell'attivit� "
-"commerciale, perdite finanziarie, oneri legali e sanzioni pecuniarie che "
-"derivino da sentenze giudiziarie, o qualsiasi altra perdita conseguente), "
-"dovuto al possesso e all'uso di componenti software, o derivante dall'aver "
-"scaricato componenti software da uno dei siti di Mandrake Linux, che "
-"risultino proibiti o soggetti a limitazioni d'uso in alcune nazioni per "
-"effetto di leggi locali. Questa limitazione di responsabilit� si applica, ma "
-"non � limitata, alle componenti di crittografia sicura incluse nel "
-"Software.\n"
-"\n"
-"\n"
-"3. La Licenza GPL (\"General Public License\") e altre Licenze collegate\n"
-"\n"
-"Il Software � costituito da componenti create da persone ed enti diversi. La "
-"maggior parte di queste componenti sono soggette ai termini e alle "
-"condizioni della GNU General Public License, d'ora in poi chiamata \"GPL\", "
-"o di licenze simili. La maggior parte di queste licenze vi consente di "
-"usare, duplicare, adattare o redistribuire le componenti software che le "
-"adottano. Per favore leggete con attenzione i termini e le condizioni della "
-"licenza relativa a ciascuna componente prima di utilizzarla. Qualsiasi "
-"domanda relativa alla licenza di una componente software dovrebbe essere "
-"indirizzata all'autore di tale componente, e non alla MandrakeSoft. I "
-"programmi sviluppati dalla MandrakeSoft S.A. sono soggetti alla licenza GPL."
-"La documentazione scritta dalla MandrakeSoft S.A. � soggetta a una licenza "
-"specifica. Per favore consultate la documentazione per ulteriori dettagli.\n"
-"\n"
-"\n"
-"4. Diritti di propriet� intellettuale\n"
-"\n"
-"Tutti i diritti relativi alle componenti del Software appartengono ai "
-"rispettivi autori e sono protetti dalle leggi che disciplinano la propriet� "
-"intellettuale e il copyright applicabili ai programmi software.La "
-"MandrakeSoft S.A. si riserva il diritto di modificare o adattare il "
-"Software, in parte o in tutto, con ogni mezzo e per qualsiasi scopo."
-"\"Mandrake\", \"Mandrake Linux\" e i relativi logo sono propriet� della "
-"MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Disposizioni diverse\n"
-"\n"
-"Se una qualsiasi parte di questo contratto � ritenuta non valida, illegale o "
-"non applicabile in seguito a sentenza giudiziaria in una determinata "
-"giurisdizione, tale parte � esclusa dal contratto. Rimangono vincolanti le "
-"altre parti applicabili del contratto.I termini e le condizioni di questa "
-"Licenza sono soggetti alle leggi vigenti in Francia.Qualsiasi disputa in "
-"merito ai termini di questa licenza verr� risolta preferibilmente per via "
-"extra-giudiziaria. Come ultima risorsa, la disputa verr� portata "
-"all'attenzione del Tribunale competente di Parigi - Francia.Per qualsiasi "
-"domanda riguardo questo documento, per favore contattate MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastiera"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Per favore, scegli la mappa della tastiera."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Ecco la lista completa delle tastiere disponibili"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Che classe di installazione preferisci?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installa/Aggiorna"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "� un'installazione o un aggiornamento?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Raccomandata"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Esperto"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Aggiorna"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Solo aggiornamento pacchetti"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Per favore, scegli il tipo del tuo mouse."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Porta del mouse"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Per favore scegli a che porta seriale � connesso il mouse."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulazione pulsanti"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulazione pulsante 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulazione pulsante 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Configuro schede PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Sto configurando IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nessuna partizione disponibile"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Controllo delle partizioni per trovare i punti di mount"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Scegli i punti di mount"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Non posso leggere la tua tabella delle partizioni, � troppo corrotta \n"
-"per me :( . Posso provare a continuare a svuotare le partizioni danneggiate\n"
-"(TUTTI I DATI verranno persi!). L'altra soluzione � di impedire a DrakX di\n"
-"modificare la tabella delle partizioni. (L'errore � %s)\n"
-"\n"
-"Ti va bene liberare tutte le partizioni?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Diskdrake ha fallito la lettura della tabella delle partizioni.\n"
-"Continua a tuo rischio e pericolo!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Non c'� spazio libero per un bootstrap di 1MB! L'installazione continua, ma "
-"per avviare il sistema dovrai creare la partizione di bootstrap con DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Non ho trovato una partizione root da aggiornare"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partizione radice"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Qual'� la partizione radice (/) del tuo sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Devi resettare affinch� le modifiche alla tabella delle partizioni\n"
-"abbiano effetto"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Scegli le partizioni che vuoi formattare"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Controllo blocchi danneggiati?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formattazione partizioni"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Sto creando e formattando il file %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Swap insufficiente per completare l'installazione. Per favore, aumentane le "
-"dimensioni"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Sto cercando i pacchetti disponibili"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Sto cercando i pacchetti da aggiornare"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Il tuo sistema non ha abbastanza spazio rimanente per l'installazione o\n"
-"l'aggiornamento (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minima (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Raccomandata (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Per favore scegli di caricare o salvare la selezione pacchetti su floppy.\n"
-"Il formato � lo stesso dei floppy generati con auto_install."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Carica da floppy"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Caricamento da floppy"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Selezione pacchetti"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Inserisci un floppy contenente la scelta dei pacchetti"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Salva su floppy"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Lo spazio indicato � maggiore dello spazio disponibile"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Tipo di installazione"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Non avete selezionato nessun gruppo di pacchetti.\n"
-"Per favore scegliete il tipo di installazione minima desiderato:"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Con X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Con la documentazione essenziale (raccomandata!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Installazione veramente minima (in particolare niente urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se hai tutti i CDs nella lista qui sopra, clicca Ok.\n"
-"Se non hai nessuno di questi CDs, clicca su Annulla.\n"
-"Se mancano solo alcuni dei CD, deselezionali, e poi clicca Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom chiamato \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Sto preparando l'installazione"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installazione del pacchetto %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configurazione post installazione"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Per favore inserisci il floppy di avvio utilizzato nel drive %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Per favore inserisci il floppy di aggiornamento moduli nel drive %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Hai ora la possibilit� di scaricare software per la cifratura dei dati.\n"
-"\n"
-"ATTENZIONE !\n"
-"A causa dei diversi requisiti generali applicabili a questi software e\n"
-"imposti da varie nazioni, clienti e/o utenti finali di questi software "
-"dovrebbero\n"
-"assicurarsi che le leggi della propria nazione consentano di scaricare, "
-"archiviare\n"
-"e/o usare questo tipo di software.\n"
-"\n"
-"Inoltre clienti e/o utenti finali dovrebbero prestare particolare attenzione "
-"a non infrangere\n"
-"le leggi della propria nazione. Se clienti e/o utenti finali non dovessero\n"
-"rispettare i dettami di tali leggi in vigore, potrebbero incorrere in gravi\n"
-"sanzioni.\n"
-"\n"
-"Sia Mandrakesoft sia i suoi produttori e fornitori non potranno essere "
-"ritenuti responsabili\n"
-"per danni speciali, indiretti o accidentali (inclusi, ma non limitati a, "
-"perdite\n"
-"di guadagni, interruzioni di affari, perdita di dati commerciali e altre "
-"perdite\n"
-"pecuniarie, ed eventuali multe e indennit� da pagare a seguito di sentenza "
-"di \n"
-"tribunale) derivanti da uso, possesso, o semplice scaricamento di questi "
-"software,\n"
-"a cui clienti e/o utenti finali abbiano eventuale accesso dopo aver "
-"sottoscritto\n"
-"il presente accordo.\n"
-"\n"
-"Per ogni eventuale delucidazione in relazione a questo argomento, si prega "
-"di\n"
-"contattare\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Adesso avete la possibilit� di scaricare dei pacchetti aggiornati che sono\n"
-"stati distribuiti dopo l'uscita della distribuzione.\n"
-"\n"
-"Riceverete aggiornamenti relativi alla sicurezza e/o bug fix, ma � "
-"necessario\n"
-"disporre di una connessione a Internet per continuare.\n"
-"\n"
-"Volete installare gli aggiornamenti?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Connessione con il sito Mandrake Linux per avere la lista dei mirror "
-"disponibili"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Scegli un mirror da cui prendere i pacchetti"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Conessione al mirror per avere la lista dei pacchetti disponibili"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Qual'� il tuo fuso orario?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "L'orologio del tuo hardware � settato su GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Sincronizzazione automatica dell'ora (usando NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Server NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Server CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nessuna stampante"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Hai una scheda audio ISA?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Lanciate \"sndconfig\" dopo l'installazione per configurare la vostra scheda "
-"audio"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Non � stata rilevata nessuna scheda audio. Provate con \"harddrake\"\n"
-"dopo l'installazione."
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Riepilogo"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mouse"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Fuso orario"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Stampante"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Scheda ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Scheda audio"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Scheda TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "File locali"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Scegli password per root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Nessuna Password"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Questa password � troppo semplice (deve essere almeno di %d caratteri)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autenticazione"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Autenticazione LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP�Base�dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Server LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Autenticazione NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Dominio NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Server NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Un disco di avvio personalizzato provvede un modo di accesso al tuo sistema\n"
-"Linux senza dipendere dal normale bootloader. Ci� � utile se non vuoi\n"
-"installare SILO sul tuo sistema, o un altro sistema operativo rimuove\n"
-"SILO o SILO non funziona con la tua configurazione hardware. Un disco di "
-"avvio\n"
-"personalizzato pu� anche essere usato con l'immagine di salvataggio di\n"
-"Mandrake, rendendo molto pi� facile il ripristino dopo gravi errori\n"
-"del sistema.\n"
-"\n"
-"Se vuoi creare un disco di avvio per il tuo sistema, inserisci un floppy\n"
-"nel primo drive e premi \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primo drive floppy"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Secondo drive floppy"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Salta"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Un disco di avvio personalizzato provvede un modo di accesso al tuo sistema\n"
-"Linux senza dipendere dal normale bootloader. Ci� � utile se non vuoi\n"
-"installare LILO (o Grub) sul tuo sistema, o un altro sistema operativo "
-"rimuove\n"
-"LILO o LILO non funziona con la tua configurazione hardware. Un disco di "
-"avvio\n"
-"personalizzato pu� anche essere usato con l'immagine di salvataggio di\n"
-"Mandrake, rendendo molto pi� facile il ripristino dopo gravi errori\n"
-"del sistema. Vuoi creare un disco di avvio per il tuo sistema?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(ATTENZIONE! State usando XFS per la vostra partizione radice,\n"
-"molto probabilmente non sar� possibile creare un floppy di 1.44�Mb\n"
-"perch� XFS necessita di in driver molto grande)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Spiacente, nessun drive floppy disponibile"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Scegli il drive floppy che vuoi utilizzare per creare il disco di avvio"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Inserisci un floppy nel drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Creazione disco di avvio"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Preparazione del bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Apparentemente disponi di una macchina OldWorld o\n"
-" sconosciuta, il bootloader yaboot non andr� bene per te.\n"
-"L'installazione continuer�, ma dovrai usare\n"
-" BootX per avviare il tuo computer"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Vuoi usare aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Errore installando aboot, \n"
-"provo a forzare l'installazione anche se ci� distrugge la prima partizione?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Sto installando il bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Installazione del bootloader fallita. Si � verificato il seguente errore:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Potrebbe essere necessario cambiare il dispositivo di boot Open Firmware\n"
-" per abilitare il bootloader. Se non vedete il prompt del bootloader\n"
-" dopo il riavvio, premete Command-Option-O-F al riavvio e digitate:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Poi digitate: shut-down\n"
-"Al boot successivo dovreste vedere il prompt del bootloader."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inserisci un floppy vuoto nel drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Sto creando il floppy di auto installazione"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Alcune fasi non sono completate.\n"
-"\n"
-"Vuoi veramente interrompere adesso?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Congratulazioni, l'installazione � completa.\n"
-"Rimuovi il disco di avvio e premi Invio per riavviare il sistema.\n"
-"\n"
-"\n"
-"Per informazioni su aggiornamenti disponibili per questa release di Linux\n"
-"Mandrake, consulta l'Errata disponibile su\n"
-"\n"
-"\n"
-"http://www.mandrakelinux.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informazioni su come configurare il tuo sistema sono disponibili nel "
-"capitolo\n"
-"sulla post-installazione della Guida Ufficiale dell'Utente Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Crea il floppy di auto installazione"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"L'auto installazione pu� essere del tutto automatizzata se desiderate,\n"
-"ma in tal caso il programma partizioner� automaticamente il disco!!\n"
-"(questa opzione � pensata per l'installazione su un'altra macchina).\n"
-"\n"
-"Probabilmente preferirete ripetere l'installazione.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizzata"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ripeti"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Salva scelta pacchetti"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Installazione Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> muove il cursore   | <Barra> seleziona | <F12> videata succ."
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu manca"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "manca l'aiuto per la console"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Scegli un file"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avanzato"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Di base"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Attendere prego"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Espandi struttura"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Raggruppa struttura"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Cambia tra ordinamento semplice o a gruppi"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Scelta errata, prova di nuovo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "La tua scelta? (default %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Entrate che dovrete riempire:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "La tua scelta? (0/1, default `%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Pulsante�`%s':�%s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Vuoi cliccare su questo pulsante?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "La tua scelta? (default `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Ci sono molte cose fra cui scegliere (%s)\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Per favore scegliete il primo numero dell'intervallo di 10 che desiderate\n"
-"modificare, oppure premete Invio per continuare.\n"
-"La vostra scelta?"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Attenzione, un'etichetta � cambiata:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Riproporre"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Ceca (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Tedesca"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spagnola"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finlandese"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francese"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norvegese"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polacca"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russa"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Svedese"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Tastiera UK"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Tastiera US"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanese"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armena (vecchia)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armena (macchina da scrivere)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armena (fonetica)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjana (latina)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgara (fonetica)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgara (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliana (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorussa"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Svizzera (mappa tedesca)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Svizzera (mappa francese)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Ceca (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Tedesca (nessun tasto morto)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danese"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norvegese)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Svedese)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estone"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiana (mappa \"Russa\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiana (mappa \"Latina\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Greca"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungherese"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israeliana"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israeliana (Fonetica)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraniana"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandese"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiana"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Giapponese 106 tasti"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Tastiera Coreana"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latino Americana"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituana AZERTY (vecchia)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituana AZERTY (nuova)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituana \"numero riga\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituana \"fonetica\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Lettone"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedone"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Olandese"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polacca (mappa qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polacca (mappa qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portoghese"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadese (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romena (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romena (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russa (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovena"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovacca (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovacca (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serba (cirillica)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tastiera Thai"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tastiera Tajik"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turca (modulo \"F\" tradizionale)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turca (modello \"Q\" moderno)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucraina"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Tastiera US (internazionale)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"riga numerica\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslava (latino)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Tasto Alt di destra"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Entrambi i tasti Shift allo stesso tempo"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "I tasti Ctrl e Shift allo stesso tempo"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Il tasto CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Tasti Ctrl e Alt allo stesso tempo"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "I tasti Alt e Shift allo stesso tempo"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Tasto \"Menu\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Tasto \"Windows\" di sinistra"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Tasto \"Windows\" di destra"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Mount circolari %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Prima rimuovi i volumi logici\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Il supporto PCMCIA non � pi� disponibile per i kernel 2.2, per favore usate "
-"un kernel 2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse con rotellina su porta PS2 generico "
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius Netscorll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 pulsante"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Mouse generico a 2 Pulsanti"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generico"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Ruota"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriale"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Mouse generico a 3 Pulsanti"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech serie CC (seriale)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "Serie MM"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Mouse Logitech (seriale, vecchio tipo C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 pulsanti"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 pulsanti"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "nessuno"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Nessun mouse"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Per favore prova il mouse"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Per attivare il mouse"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MUOVI LA RUOTA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finisci"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Avanti ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Indietro"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "� corretto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Connetti a Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Il modo pi� comune per connettersi con adsl � pppoe.\n"
-"Alcune connessioni usano pptp, poche usano dhcp.\n"
-"Se non sai, scegli 'usa pppoe'."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel�speedtouch�USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usa dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usa pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usa pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Quale cliente dhcp vuoi usare?\n"
-"Quello predefinito � dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nessun adattatore di rete ethernet � stato rilevato nel tuo sistema.\n"
-"Non posso configurare questo tipo di connessione."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Scegli l'interfaccia di rete"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Per favore scegli quale adattatore di rete vuoi usare per connetterti a "
-"Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nessuna scheda di rete trovata"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Sto configurando la rete"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Per favore inserisci il tuo nome host se lo conosci.\n"
-"Alcuni server DHCP richiedono il nome host per funzionare.\n"
-"Il tuo nome host dovrebbe essere un nome pienamente qualificato,\n"
-"come ''mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nome host"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Wizard della configurazione di rete"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN esterno"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Scheda ISDN interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Di che tipo � la tua connessione ISDN?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Che configurazione ISDN preferisci?\n"
-"\n"
-"* La Vecchia configurazione usa isdn4net. Contiene strumenti potenti,\n"
-"  ma � difficile da configurare per un principiante, e non standard.\n"
-"\n"
-"* La Nuova configurazione � pi� facile da capire, pi� aderente allo\n"
-"  standard, ma dispone di un numero di strumenti inferiore.\n"
-"\n"
-"Raccomandiamo la configurazione leggera.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nuova configurazione (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Vecchia configurazione (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configurazione ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Scegli il tuo provider.\n"
-" Se non � nella lista, scegli Fuori Lista"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protocollo per l'Europa"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocollo per l'Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protocollo per il resto del mondo"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocollo per il resto del mondo \n"
-" no D-Channel (linee in affitto)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Quale protocollo vuoi usare?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Che tipo di scheda hai?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Non so"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se hai una scheda ISA, i valori nella prossima schermata dovrebbero essere "
-"giusti.\n"
-"\n"
-"Se hai una scheda PCMCIA, devi sapere IRQ e I/O della tua scheda.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Annulla"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continua"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Qual'� la tua scheda ISDN?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ho trovato una scheda ISDN PCI, ma non so di che tipo. Per favore seleziona "
-"una scheda PCI nella prossima schermata."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Non trovo nessuna scheda ISDN PCI. Per favore selezionane una \n"
-"nella prossima schermata."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Per favore scegli a che porta seriale � connesso il tuo modem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opzioni di chiamata"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nome connessione"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Numero telefonico"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID di accesso"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Basata su script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Basata su terminale"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nome dominio"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primo server DNS (opzionale)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Secondo server DNS (opzionale)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Puoi disconnetterti o riconfigurare la tua connessione."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Puoi configurare nuovamente la connessione."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Adesso sei connesso a Internet"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Puoi connetterti a Internet o configurare nuovamente la connessione."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "In questo momento non sei connesso a Internet"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Connetti"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Disconnetti"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Configura la connessione"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Connessione & configurazione Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Adesso proseguiremo con la configurazione della connessione %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Stiamo per configurare la connessione %s.\n"
-"\n"
-"\n"
-"Premi OK per cominciare."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configurazione della rete"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Dato che stai effettuando una installazione via rete, quest'ultima � gi� "
-"configurata.\n"
-"Clicca su Ok per mantenere questa configurazione, o su Annulla per "
-"riconfigurare la rete e la connessione a Internet.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Benvenuti nel Wizard di configurazione della Rete!\n"
-"\n"
-"Stiamo per configurare la vostra connessione di rete/a Internet.\n"
-"Se non volete usare il riconoscimento automatico, deselezionate il \n"
-"pulsante d'opzione.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Scegli il profilo da configurare"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Usa il riconoscimento automatico"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Riconoscimento periferiche..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Connessione normale via modem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "rilevato sulla porta: %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Connessione ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "rilevato %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Connessione ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "rilevato sull'interfaccia %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Connessione via cavo"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Rilevata connessione via cavo"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Connessione LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "rilevata scheda(e) ethernet"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Scegli il tipo di connessione che vuoi configurare"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Hai configurato diversi tipi di connessione a Internet.\n"
-"Scegli quello che vuoi usare.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Connessione a Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Vuoi effettuare la connessione all'avvio?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configurazione della rete"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "La rete dev'essere riavviata"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Si � verificato un problema al momento di riavviare la rete: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Congratulazioni, la configurazione della rete e di Internet � finita.\n"
-"\n"
-"Adesso questa configurazione verr� applicata al vostro sistema.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Dopo che questo sar� stato fatto, vi raccomandiamo di riavviare il\n"
-"vostro ambiente X per evitare problemi relativi al cambio di hostname."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Si sono verificati dei problemi durante la configurazione.\n"
-"Provate la connessione usando net_monitor o mcc. Se la connessione non "
-"funziona, dovreste ripetere la configurazione."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ATTENZIONE: questo dispositivo � stato precedentemente configurato per\n"
-"connettersi a Internet.\n"
-"Devi solo cliccare su OK per mantenere la precedente configurazione.\n"
-"Modifiche ai campi qui sotto cambieranno questa configurazione."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Per favore inserisci la configurazione IP per questa macchina.\n"
-"Ogni dato dovrebbe essere inserito come un indirizzo IP in notazione\n"
-"decimale puntata (ad esempio 1.2.3.4.)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Sto configurando il dispositivo di rete %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Indirizzo IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP automatico"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L'indirizzo IP deve essere in formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Per favore inserisci il tuo nome host.\n"
-"Il tuo nome host dovrebbe essere uno pienamente qualificato,\n"
-"come ''mybox.mylab.myco.com''.\n"
-"Puoi anche inserire l'indirizzo IP del gateway se ne hai uno."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Server DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway�(es.�%s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dispositivo di gateway"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configurazione dei proxy"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Individua identit� della scheda audio (utile per i laptop)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Il proxy dovrebbe essere http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Il proxy dovrebbe essere ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configurazione di internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Vuoi provare a connetterti a Internet adesso?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Sto provando la tua connessione ..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Adesso il sistema � connesso a Internet"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Per ragioni di sicurezza, adesso verr� disconnesso."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Il sistema non sembra essere connesso a Internet.\n"
-"Prova a configurare nuovamente la connessione."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configurazione della Connessione"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Per favore riempi o controlla il campo qui sotto"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ della scheda"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memoria della scheda (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO della scheda"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 della scheda"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 della scheda"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Il tuo numero di telefono personale"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nome del provider (es. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Numero telefonico del provider"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Dns 1 del provider (opzionale)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Dns 2 del provider (opzionale)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Scegli la tua nazione"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Modalit� di chiamata"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Velocit� della connessione"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Timeout della connessione (in secondi)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Login dell'account (nome utente)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Password dell'account"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "mount fallito: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Partizione estesa non supportata su questa piattaforma"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Hai un buco nella tua tabella delle partizioni, ma io non posso usarlo.\n"
-"L'unica soluzione � di muovere le tue partizioni primarie per avere il buco "
-"vicino alle partizioni estese"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Ripristino da file %s fallito: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "File di backup errato"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Errore scrivendo sul file %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Al tuo disco sta accadendo qualcosa di brutto. \n"
-"Un test per verificare l'integrit� dei dati � fallito. \n"
-"Significa che scrivere qualsiasi cosa sul disco generer� solo spazzatura a "
-"caso"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "da avere"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "molto bello"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bello"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "forse"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Stampante locale"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Stampante remota"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Stampante su server CUPS remoto"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Stampante su server lpd remoto"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Stampante di rete (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Stampante su server SMB/Windows95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Stampante su server NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Indica l'URI di un dispositivo di stamp"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Invia tramite pipe al comando"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Modello sconosciuto"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Stampanti locali"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Stampanti remote"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " sulla porta parallela \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", stampante USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", dispositivo multifunzione sulla porta parallela \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", dispositivo multifunzione su USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dispositivo multifunzione su HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", dispositivo multifunzione"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", sto stampando su %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "sul server LPD \"%s\",�stampante�\"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ",�host TCP/IP�\"%s\",�porta�%s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "sul server Windows \"%s\",�condivisione�\"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "sul server Novell \"%s\",�stampante�\"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", uso il comando %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Stampante di tipo raw (nessun driver)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(su %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(su questa macchina)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Sul server CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Predefinito)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Scegli Connessione stampante"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Com'� collegata la stampante?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Con un server remoto CUPS, non devi configurare alcuna stampante\n"
-"adesso: le stampanti saranno individuate automaticamente."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Configurazione di CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Indica il server CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Per avere accesso alle stampanti su server CUPS remoti all'interno della "
-"vostra rete locale non dovete configurare niente: i server CUPS informano la "
-"vostra macchina automaticamente in merito alle loro stampanti. Tutte le "
-"stampanti attualmente note alla vostra macchina sono elencate nella sezione "
-"\"Stampanti remote\" di Printerdrake. Quando il server CUPS non si trova "
-"all'interno della vostra rete locale, dovete indicare il suo indirizzo IP e, "
-"facoltativamente, il numero della porta in modo da ottenere le informazioni "
-"relative alla stampante dal server; altrimenti lasciate questi campi in "
-"bianco."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalmente CUPS viene configurato automaticamente in base al vostro "
-"ambiente di rete, in modo che possiate accedere alle sttampanti che "
-"dipendono dai server CUPS sulla vostra rete locale. Se questa caratteristica "
-"non funziona correttamente, disabilitate \"Configurazione automatica di CUPS"
-"\" e modificate manualmente il file /etc/cups/cupsd.conf. Non dimenticatevi "
-"di riavviare CUPS subito dopo (col comando: \"service�cups�restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "L'indirizzo IP deve essere in formato 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Il numero della porta dovrebbe essere un numero intero!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP del server CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Porta"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Configurazione automatica di CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Riconoscimento periferiche ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Test delle porte"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Aggiungi nuova stampante"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Benvenuti nell'assistente di configurazione delle stampanti\n"
-"\n"
-"Questo assistente vi permette di installare stampanti remote o locali che "
-"verranno usate da questa macchina e anche da altre macchine sulla rete.\n"
-"\n"
-"Vi chieder� tutte le informazioni necessarie per configurare la stampante, "
-"dandovi accesso a tutti i driver, opzioni dei driver e tipi di connessione "
-"disponibili."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Stampante locale"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Benvenuti nell'assistente di configurazione delle stampanti\n"
-"\n"
-"Questo assistente vi aiuter� a configurare le stampanti collegate a questo "
-"computer.\n"
-"\n"
-"Per favore collegate la vostra stampante al computer e accendetela. Cliccate "
-"su \"Succ\" quando siete pronti, e su \"Annulla\" se non desiderate "
-"configurare le vostre stampanti adesso.\n"
-"\n"
-"Si noti che alcuni computer potrebbero bloccarsi durante il riconoscimento "
-"automatico delle stampanti, in tal caso disabilitate questa caratteristica "
-"per poter effettuare l'installazione. Usate il modo Esperto di Printerdrake "
-"quando volete configurare la stampa su una stampante remota se Printerdrake "
-"non la include nell'elenco automaticamente."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Riconoscimento automatico stampanti"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Congratulazioni, adesso la vostra stampante � installata e configurata!\n"
-"\n"
-"Potete stampare usando il comando \"Stampa\" delle vostre appllicazioni (in "
-"genere si trova nel menu File\").\n"
-"\n"
-"Se desiderate aggiungere, rimuovere o rinominare una stampante, o se volete "
-"modificare la configurazione predefinita (cassetto della carta, qualit� di "
-"stampa, etc.), selezionate \"Stampante\" nella sezione \"Hardware\" del "
-"Centro di controllo Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Riconoscimento automatico delle stampanti"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake � in grado di riconoscere automaticamente una stampante "
-"collegata localmente su una porta parallela o USB, ma si noti che su alcuni "
-"sistemi il riconoscimento automatico PU� BLOCCARE IL SISTEMA E QUESTO PU� "
-"CAUSARE LA CORRUZIONE DEL FILESYSTEM! Pertanto fatelo A VOSTRO RISCHIO E "
-"PERICOLO!\n"
-"\n"
-"Volete davvero che le stampanti vengano riconosciute automaticamente?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Usa il riconoscimento automatico"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Configurazione manuale della stampante"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Rilevato %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Stasmpante sulla porta parallela \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Stampante USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Non � stata trovata nessuna stampante locale! Per installare manualmente una "
-"stampante indicate il nome di un dispositivo o di un file nel campo di "
-"immissione (porte parallele: /dev/lp0,�/dev/"
-"lp1,�...,�equivalenti�a�LPT1:,�LPT2:,�...;�prima stampante�USB:�/dev/usb/"
-"lp0,�seconda:�/dev/usb/lp1,�...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Devi indicare il nome di un dispositivo o di un file!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Non ho trovato nessuna stampante locale!\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Le stampanti di rete possono essere installate soltanto dopo "
-"l'installazione. Scegliete \"Hardware\" e poi \"Stampante\" nel Centro di "
-"controllo Mandrake."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Per installare stampanti di rete, cliccate su \"Annulla\", passate al \"Modo "
-"esperto\" e cliccate su \"Aggiungi nuova stampante\"."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"La stampante che segue � stata riconosciuta automaticamente, se non � quella "
-"che desiderate configurare inserite un nome di dispositivo o di file nel "
-"campo immissione testo"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Ecco una lista di tutte le stampanti che sono state riconosciute "
-"automaticamente. Per favore, scegliete quella che volete configurare, oppure "
-"inserite il nome di un dispositivo o di un file nel campo di immissione "
-"testo."
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"La stampante che segue � stata riconosciuta automaticamente. La "
-"configurazione della stampante verr� effettuata automaticamente. Se la "
-"vostra stampante non � stata riconosciuta in modo corretto, o se preferite "
-"una configurazione personalizzata, cliccate su \"Configurazione manuale\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Ecco una lista di tutte le stampanti che sono state riconosciute "
-"automaticamente. Per favore scegliete la stampante che volete configurare, "
-"la configurazione verr� effettuata in modo del tutto automatico. Se la "
-"vostra stampante non � stata riconosciuta correttamente, o se preferite una "
-"configurazione personalizzata, cliccate su \"Configurazione manuale\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Per favore scegliete la porta alla quale � connessa la vostra stampante, "
-"oppure inserite il nome di un dispositivo o di un file nel campo di "
-"immissione testo"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr ""
-"Per favore scegliete la porta alla quale � connessa la vostra stampante."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"�(Porte parallele:�/dev/lp0,�/dev/lp1,�...,�equivalenti�a�LPT1:,�LPT2:,�...; "
-"prima stampante�USB:�/dev/usb/lp0,�seconda:�/dev/usb/lp1,�...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Dovete scegliere/indicare una stampante/un dispositivo!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Configurazione manuale"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"La vostra stampante � un dispositivo multifunzione prodotto da HP "
-"(OfficeJet,�PSC,�PhotoSmart,�LaserJet�1100/1200/1220/3200/3300�con�scanner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Installazione del pacchetto HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Controllo dispositivo e configuro HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Installazione del pacchetto SANE"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Effettuo una scansione con il vostro dispositivo multifunzione HP"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Rendo la porta della stampante disponibile per CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Sto leggendo il database delle stampanti"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opzioni stampante lpd remota"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Per usare una stampante lpd remota, dovete indicare\n"
-"il nome dell'host del server della stampante e il nome della stampante\n"
-"su quel server."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Nome host remoto"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Nome della stampante remota"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Nome host remoto assente!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Nome della stampante remota assente!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opzioni Stampante SMB (Windows9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Per stampare su una stampante SMB, dovete indicare il nome\n"
-"dell'host SMB (Attenzione! non sempre corrisponde al nome host TCP/IP\n"
-"della macchina!) e possibimente l'indirizzo IP del server di stampa, come\n"
-"pure il nome di condivisione per la stampante cui volete accedere e ogni\n"
-"informazione utile riguardo nome dell'utente, password e gruppo di lavoro."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Host del server SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP del server SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nome di condivisione"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Gruppo di lavoro"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Devi indicare il nome del server o il numero IP dello stesso!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Il nome della condivisione Samba � assente!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opzioni stampante NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Per stampare su una stampante NetWare, dovete fornire il nome\n"
-"del server di stampa NetWare (Attenzione! potrebbe essere diverso dal nome\n"
-"del suo host TCP/IP!) insieme al nome della coda di stampa per la\n"
-"stampante cui volete accedere e ogni nome utente e password applicabili."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Server della stampante"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nome della coda di stampa"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Il nome del server NCP � assente"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Il nome dellla coda NCP � assente!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Opzioni della stampante TCP/Socket"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Per stampare su una stampante TCP/Socket, dovete indicare il\n"
-"nome host della stampante e opzionalmente il numero della porta.\n"
-"Sui server HP JetDirect il numero della porta in genere � 9100, su\n"
-"altri server potrebbe essere diverso. Consultate il manuale del vostro\n"
-"hardware."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Nome host della stampante"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Nome host della stampante assente!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI della stampante"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Potete indicare direttamente l'URI di accesso alla stampante. Tale URI deve "
-"essere conforme alle specifiche CUPS o Foomatic. Notate che non tutti i i "
-"tipi di URI sono supportati da tutti gli spooler."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Dev'essere inserito un'URI valido!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Ogni stampante deve avere un nome (ad esempio \"stampante\").\n"
-"Non � indispensabile riempire i campi Descrizione e \n"
-"Posizione. Si tratta di commenti per gli utenti."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nome della stampante"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Descrizione"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Posizione"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Sto preparando il database delle stampanti ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Il modello della vostra stampante"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Il modello � corretto"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Selezionate il modello manualmente"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Scelta del modello della stampante"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Che modello di stampante hai?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Per favore, controllate che Printerdrake abbia effettuato correttamente il "
-"riconoscimento automatico della vostra stampante. Se il cursore si trova su "
-"un modello errato o su \"Stampante di tipo raw\", cercate quello corretto "
-"nella lista."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Se la vostra stampante non � presente nella lista, cercate un modello "
-"compatibile o simile (consultate il manuale della stampante)."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Configurazione di una stampante OKI winprinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Configurazione di una stampante Lexmark a getto d'inchiostro"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Impostazioni predefinite della stampante\n"
-"\n"
-"Dovreste accertarvi che le dimensioni della pagina e il tipo di inchiostro/"
-"modo di stampa (se disponibile) e anche la configurazione hardware delle "
-"stampanti laser (memoria, unit� duplex, cassetti supplementari) siano "
-"impostati correttamente. Si noti che quando la qualit�/risoluzione di stampa "
-"� molto alta, la durata della stampa pu� diventare sensibilmente pi� lenta."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "L'opzione %s dev'essere un numero intero!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "L'opzione %s dev'essere un numero!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opzione %s fuori scala!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Volete impostare questa stampante (\"%s)\n"
-"come stampante predefinita?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Pagine di prova"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Nessuna pagina di prova"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Stampa"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Pagina di prova standard"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Pagina di prova alternativa (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Pagina di prova fotografica"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Non stampare nessuna pagina di prova"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Stampa della(e) pagina(e) di prova..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"La pagina(e) di prova � stata inviata alla stampante.\n"
-"Potrebbe occorrere un po' di tempo prima che la stampa inizi.\n"
-"Stato della stampa:\n"
-"%s\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"La pagina(e) di prova � stata inviata alla stampante.\n"
-"potrebbe occorrere un po' di tempo prima che la stampa inizi.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Stampante in modo raw"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Chiudi"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Stampa/Scansione in corso su \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Sto stampando con la stampante \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Lista opzioni di stampa"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Sto leggendo i dati della stampante..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Configurazione della stampante a trasferimento"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Il nome della stampante dovrebbe contenere solo lettere, numeri e il "
-"trattino di sottolineatura"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nuovo nome della stampante"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Sto aggiornando i dati della stampante ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Configura di una stampante remota"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Sto attivando la connessione di rete ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Configura la rete adesso"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Funzionalit� di rete non configurate"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Vai avanti senza configurare la rete"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Sto riavviando il sistema di stampa ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "alto"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoico"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Avvio il sistema di stampa al momento del boot"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Scegli il sistema di stampa"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Che sistema di stampa (spooler) vuoi usare?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Sto configurando la stampante \"%s\"�..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Installazione del pacchetto Foomatic"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opzioni stampante"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Sto preparando PrinterDrake"
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Configurazione applicazioni ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Vorresti configurare la stampa?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "PrinterDrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Cambia il sistema di stampa"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modo Normale"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Volete configurare un'altra stampante?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Modifica configurazione stampante"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Stampante %s\n"
-"Cosa volete modificare riguardo questa stampante?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tipo di connessione della stampante"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Nome, descrizione, collocazione della stampante"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Stampa della(e) pagina(e) di prova"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Sapere come usare questa stampante"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Rimuovi stampante"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Sto rimuovendo la vecchia stampante \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Stampante predefinita"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Volete davvero rimuovere la stampante \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Sto rimuovendo la stampante \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configurazione dei proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Benvenuto nell'utilit� di configurazione dei proxy.\n"
-"\n"
-"Qui potrai configurare i tuoi proxy http e ftp,\n"
-"con o senza login e password\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Per favore completa le informazioni relative al proxy http\n"
-"Lascia in bianco se non desideri un proxy http"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Porta"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "L'URL dovrebbe cominciare con 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Il numero della porta dovrebbe essere in cifre"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Per favore completa le informazioni relative al proxy ftp\n"
-"Lascia in bianco se non desideri un proxy ftp"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "L'URL dovrebbe cominciare con 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Per favore inserisci il login e la password per il proxy, se esistono.\n"
-"Lascia in bianco se non � necessario."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Password"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "digita ancora la password"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Le password non corrispondono. Prova ancora!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Non posso aggiungere una partizione a _RAID_ formattato md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Non posso scrivere il file %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid fallito"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid fallito (forse manca raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Non ci sono abbastanza partizioni per RAID livello %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Lancia il sistema audio ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un gestore di comandi periodici."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd � usato per monitorare lo stato delle batterie e fare il log tramite\n"
-"syslog. Pu� anche essere usato per spegnere la macchina quando la batteria\n"
-"� scarica."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Lancia comandi programmati dal comando at al momento specificato quando\n"
-"at � stato lanciato, e lancia comandi batch quando il carico medio �\n"
-"sufficientemente basso."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron � un programma UNIX standard che lancia programmi definiti dall'utente\n"
-"a intervalli periodici programmati. vixie cron aggiunge un numero di "
-"funzioni\n"
-"al cron UNIX di base, inclusi maggior sicurezza e opzioni di "
-"configurazione \n"
-"pi� potenti."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM aggiunge il supporto del mouse ad applicazioni Linux basate su testo "
-"come\n"
-"Midnight Commander. Permette anche operazioni taglia/incolla via mouse in \n"
-"console e include supporto per dei menu a scomparsa in console."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake esegue un'indagine riguardo l'hardware, e opzionalmente\n"
-"configura l'hardware nuovo/cambiato."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache � un server per World Wide Web. � usato per gestire files HTML\n"
-"e CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Il demone superserver di Internet (comunemente chiamato inetd) avvia una\n"
-"variet� di altri servizi Internet a richiesta. � responsabile per l'avvio\n"
-"di molti servizi, inclusi telnet, ftp, rsh, e rlogin. Disabilitando inetd\n"
-"si disabilitano tutti i servizi di cui � responsabile."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Lancio del filtro dei pacchetti per la serie di kernel 2.2, allo\n"
-"scopo di impostare un firewall che protegga la tua macchina da intrusioni."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Questo pacchetto carica la mappa di tastiera selezionata come definito in\n"
-"/etc/sysconfig/keyboard, che pu� essere scelta usando l'utilit� kdbconfig.\n"
-"Dovresti lasciarlo abilitato per la maggior parte delle macchine."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Rigenerazione automatica dell'intestazione del kernel /boot per\n"
-"/usr/include/linux/{autoconf,versione}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Riconoscimento e configurazione automatica dell'hardware al boot."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf talvolta deve eseguire alcune operazioni al momento\n"
-"del boot per gestire la configurazione del sistema."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd � il demone di stampa richiesto perch� lpr funzioni propriamente. �\n"
-"fondamentalmente un server che distribuisce i job di stampa alle stampanti."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, usato per impostare un server ad alte prestazioni\n"
-"e alta disponibilit�."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) � un Domain Name Server (DNS) utilizzato per risolvere\n"
-"nomi host in indirizzi IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta e smonta tutti i punti di mount di Network File System (NFS),\n"
-"SMB (Lan Manager/Windows), e NCP (Netware)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Attiva/Disattiva tutte le interfacce di rete di cui � previsto l'avvio\n"
-"al momento del boot."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS � un popolare protocollo per la condivisione di file attraverso reti\n"
-"TCP/IP. Questo servizio consente funzionalit� di server NFS, che sono\n"
-"configurate tramite il file /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS � un popolare protocollo per la condivisione di file attraverso reti TCP/"
-"IP.\n"
-"Questo servizio consente funzionalit� di blocco dei file NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Attiva automaticamente il tasto relativo al tastierino numerico\n"
-"per la console e XFree al momento del boot."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Supporto per le stampanti Windows OKI 4w e compatibili."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Il supporto PCMCIA di solito serve per usare dispositivi di tipo ethernet e\n"
-"modem nei portatili. Non sar� lanciato se non � stato configurato, perci� "
-"� \n"
-"sicuro da avere installato anche su macchine che non lo richiedono."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Il portmapper gestisce connessioni RPC, che sono usate da protocolli\n"
-"come NFS e NIS. Il server portmap deve essere in esecuzione su macchine che\n"
-"agiscono come server per protocolli che fanno uso di meccanismi RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix � un Agente di Trasporto di Posta, un programma che\n"
-"sposta messaggi da una macchina ad un'altra."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Salva e ripristina l'entropia del sistema per una generazione di numeri\n"
-"casuali di alta qualit�."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Assegna dispositivi raw a dispositivi a blocchi (quali le partizioni\n"
-"di un disco rigido), da usare con applicazioni come Oracle."
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Il demone routed permette tabelle di router IP automatiche aggiornate per\n"
-"mezzo del protocollo RIP. Mentre RIP � largamente usato in piccole reti, \n"
-"protocolli di routing pi� complessi sono necessari per reti pi� complesse."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Il protocollo rstat permette agli utenti di una rete di recuperare\n"
-"misurazioni delle prestazioni per ogni macchina di quella rete."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Il protocollo rusers permette agli utenti di una rete di identificare\n"
-"chi � connesso su una macchina interrogata in proposito."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Il protocollo rwho permette a utenti remoti di ottenere una lista di \n"
-"tutti gli utenti connessi a una macchina su cui gira il demone rwho\n"
-"(similarmente a finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Lancia il sistema audio sulla tua macchina"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog � una utilit� che molti demoni usano per aggiungere messaggi\n"
-"in vari file di log di sistema. � una buona idea lanciare sempre syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Carica i driver per i tuoi dispositivi USB."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Avvia il server di caratteri (indispensabile per eseguire XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Scegli quali servizi saranno lanciati automaticamente all'avvio."
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Stampa"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistema"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Amministrazione remota"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Server di database"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servizi"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "in esecuzione"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "fermato"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servizi e demoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Spiacente, ma non ci sono ulteriori\n"
-"informazioni riguardo questo servizio."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Al boot"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Avvia"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Unisciti al mondo del software libero"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet e messaggistica istantanea"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia e Grafica"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Sviluppo"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Centro di Controllo Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Interfacce utente"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Software per server"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Giochi"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Installazione dei pacchetti ..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Non posso leggere la tua tabella delle partizioni, � troppo\n"
-"corrotta per me :( . Prover� a cancellare le partizioni rovinate."
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Errore!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Configurazione installazione automatica"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Configurazione automatica fasi di installazione"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Congratulazioni!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Installazione automatica"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Aggiungi una voce"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Rimuovi l'ultima voce"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr "***********************************************************************\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "progresso totale"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Backup dei file di sistema..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "File di backup su disco rigido..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Backup dei file dell'utente"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Progresso del backup del disco rigido..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Backup di altri file"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Selezione file"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Selezionate i file e le directory e cliccate su 'Aggiungi'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Per favore abilitate tutte le opzioni necessarie\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Queste opzioni possono effettuare il backup e il ripristino di tutti i file "
-"nella\n"
-"vostra directory /etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Backup dei vostri file di sistema (directory /etc)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Usa backup incrementali (non sostituire i vecchi backup)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Non includere file critici (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Grazie a questa opzione sarete in grado di ripristinare ogni versione della\n"
-"vostra directory /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Per favore scegli tutti gli utenti che vuoi includere nel backup"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Non includere la cache del navigatore"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Usa backup incrementali (non sostituire i vecchi backup)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Rimuovi quelli selezionati"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Utenti"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Per favore inserisci il nome dell'host o l'IP"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Per favore inserisci il tuo nomei di login"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Per favore inserisci la tua password"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Ricorda questa password"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "Connessione FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Connessione sicura"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Per favore, scegliete lo spazio su CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Per favore, accertatevi di usare supporti CD-RW"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Per favore, controllate se volete includere\n"
-"il boot di install sul CD"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Per favore, inserite il numero che identifica il vostro masterizzatore\n"
-"ad esempio: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Usa unit� a nastro per effettuare il backup"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Per favore, inserite il nome del dispositivo da usare per il backup"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Per favore, indicate le dimensioni massime\n"
-"concesse a Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Per favore inserisci la directory da salvare:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Usa una quota per i file di backup."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Rete"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM�/�DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Disco rigido �/�NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "ogni ora"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "ogni giorno"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "settimanale"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "ogni mese"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Usa demone"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Per favore, scegli la frequenza\n"
-"del backup"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Per favore, scegli il supporto\n"
-"del backup"
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Usa disco rigido con il demone"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Usa FTP con il demone"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"Per favore, accertatevi che il demone cron sia incluso fra i servizi attivi"
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Dopo ogni backup invia una mail rapporto a:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Cosa"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Dove"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Quando"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Altre opzioni"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Configurazione di Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Per favore scegliete dove volete effettuare il backup"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "sul disco rigido"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "sulla rete"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Per favore scegliete i pacchetti che volete installare."
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Sistema di backup"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Fai il backup degli utenti"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Seleziona l'utente manualmente"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Fonti del backup: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- File di sistema:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- File degli utenti:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Altri file:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Salva su disco rigido seguendo il percorso: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Salva via FTP sull'host: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t�nome utente:�%s\n"
-"\t\t�sul percorso:�%s�\n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"-Opzioni:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tNon includere file di sistema\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tEffettua backup usando tar e bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tI backup fanno uso di tar e gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disco rigido.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Rete via FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Rete via SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"Nessun file di configurazione, per favore cliccate su Assistente o "
-"Avanzato.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr "Lista di dati da ripristinare:\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr "Lista di dati corrotti:\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Per favore scegliete a che porta seriale � connesso il vostro modem."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "I file di backup sono corrotti"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "����������Tutti i dati selezionati sono stati����������"
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "����������Ripristinati con successo su�%s�������"
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "���������Ripristina configurazione�������"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK al ripristino degli altri file"
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Lista degli utenti da ripristinare (solo la data pi� recente per utente � "
-"importante)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Effettua il backup dei file di sistema prima di:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Per favore, scegliete la data da ripristinare"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Usa il disco rigido per effettuare il backup"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Ripristina da disco rigido"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Per favore, indicate la directory in cui sono archiviati i backup"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Scegliete un altro supporto dal quale effettuare il ripristino"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Altri supporti"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Ripristina sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Ripristina utenti"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Ripristina altro"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "selezionate il percorso del ripristino (invece di / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Effettua nuovo backup prima del ripristino (solo per backup incrementali)."
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Rimuovi le directory dell'utente prima del ripristino."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Ripristina tutti i backup"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Personalizza il ripristino"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Aiuto"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Precedente"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Salva"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Costruisci backup"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Ripristina"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Successivo"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Per favore fai un backup prima di ripristinarlo...\n"
-" o verifica che il percorso alla directory di salvataggio � corretto."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Errore usando sendmail\n"
-"  la vostra mail di report non � stata inviata\n"
-"  Per favore configurate sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lista dei pacchetti da installare"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Errore nella trasmissione del file via FTP.\n"
-" Per favore, controllate la configurazione FTP."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Per favore, scegliete il tipo del vostro mouse."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Per favore, scegliete il tipo del vostro mouse."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Per favore, scegliete il tipo del vostro mouse."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Nessun file di configurazione trovato\n"
-"per favore cliccate su Assistente o Avanzato"
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Ancora in sviluppo ... attendere per favore."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Backup dei file di sistema"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Backup dei file degli utenti"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Backup di altri file"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Progresso totale"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "trasmissione file via FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Sto inviando i�file ..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Lista di dati da includere su CDROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Per favore, insersci la velocit� del masterizzatore"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-"Per favore inserite il numero che identifica il vostro masterizzatore (es.: "
-"0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Per favore scegliete i pacchetti che volete installare."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Effettua il backup adesso sulla base del file di configurazione"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Vedi la configurazione di backup"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Configurazione dell'assistente"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Configurazione avanzata"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Effettua il backup adesso"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-"Alcuni errori nell'invio della posta sono causati da\n"
-"un'errata configurazione di postfix. Per risolvere il problema\n"
-"dovete indicare ilmionomehost o ilmiodominio in /etc/postfix/main.cf\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-"�Copyright�(C)�2001�MandrakeSoft�by�DUPONT�Sebastien�<dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Installazione di %s fallita. Si � verificato il seguente errore:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Cerca fonti installate"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Deseleziona fonti installate"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "esamina tutti i font"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "nessun font trovato"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "fatto"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "non ho trovato nessun font nelle partizioni montate"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Ri-selezionate i font corretti"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "non ho trovato nessun font.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Cerca font nella lista installati"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Copia i font"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installazione di font True Type"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "per favore attendere mentre eseguo ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Installazione font True Type effettuata"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Conversione font"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "sto costruendo type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "conversione font ttf"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "conversione font pfm"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Soppressione file temporanei"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Riavvia XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Soppressione file dei font"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "riavvia xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Prima di installare qualsiasi font accertatevi di avere il permesso di "
-"installarli e usarli sul vostro sistema.\n"
-"\n"
-"-Potete installare i font nel modo normale. In casi piuttosto rari, dei font "
-"corrotti potrebbero bloccare il vostro server X."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Importazione font"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Prendi i font di Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Disintallazione font"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Opzioni avanzate"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Lista font"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Scegliete le applicazioni che supporteranno i font:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Stampanti generiche"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Selezionate il file o la directory del font e cliccate su 'Aggiungi'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Lista di installazione"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "cliccate qui se ne siete sicuri."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "qui in caso contrario."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Deseleziona tutto"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Tutti selezionati"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Rimuovi lista"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Test iniziali"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Copia i font sul tuo sistema"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Installa e converti i font"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Post-installazione"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Rimuovi i font dal tuo sistema"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Post-disinstallazione"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Condivisione connessione Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Condivisione della connessione a Internet attualmente abilitata"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Il setup della condivisione della connessione Internet � gi� stato fatto.\n"
-"� attualmente abilitata.\n"
-"\n"
-"Cosa vorresti fare?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "disabilita"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "abbandona"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "riconfigura"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Sto disattivando i server..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "La condivisione della connessione a Internet ora � disabilitata."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Condivisione connessione Internet attualmente disabilitata"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Il setup della condivisione della connessione internet � gi� stato fatto.\n"
-"� attualmente disabilitata.\n"
-"\n"
-"Cosa vorresti fare?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "abilita"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Sto attivando i server..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "La condivisione della connessione a Internet ora � abilitata."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Stai per configurare il tuo computer per condividere la sua connessione a "
-"Internet.\n"
-"Grazie a questa caratteristica, altri computer sulla tua rete locale "
-"potranno usare la connessione a Internet di questa macchina.\n"
-"\n"
-"Nota: � necessario un Adattatore di Rete dedicato per realizzare una\n"
-"Rete di Area Locale (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfaccia %s (usa il modulo %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfaccia %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nessun adattatore di rete nel tuo sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nessun adattatore di rete ethernet � stato rilevato nel tuo sistema. Per "
-"favore lancia l'utilit� di configurazione hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interfaccia di rete"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"C'� un solo adattatore di rete configurato nel tuo sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Sto per configurare la tua rete locale (LAN) usando quell'adattatore."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Per favore scegliete quale adattatore di rete sar� connesso alla vostra rete "
-"locale (LAN)."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Interfaccia di rete gi� configurata"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Attenzione, la scheda di rete (%s) � gi� configurata.\n"
-"\n"
-"Desiderate una ri-configurazione automatica?\n"
-"\n"
-"Potete farlo manualmente se sapete quello che state facendo."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Riconfigurazione automatica"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Mostra la configurazione dell'interfaccia corrente"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Configurazione attuale di `%s':\n"
-"\n"
-"Rete: %s\n"
-"Indirizzo IP: %s\n"
-"Attribuzione IP: %s\n"
-"Driver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Posso conservare la vostra configurazione attuale e supporre che abbiate gi� "
-"impostato un serverDHCP; in tal caso, per favore controllate che la rete di "
-"classe C che usate per la vostra rete locale sia stata letta correttamente; "
-"non la riconfigurer� e non toccher� la configurazione del vostro server "
-"DHCP.\n"
-"\n"
-"In alternativa, posso riconfigurare la vostra interfaccia di rete e (ri)"
-"configurare un server DHCP per voi.\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Rete locale di classe C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP di (questo) server DHCP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Riconfigurazione dell'interfaccia di rete e del server DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "La rete locale non terminava con `.0', rinuncio."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Trovato conflitto potenziale dell'indirizzo LAN nella configurazione "
-"corrente di %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Rilevata configurazione di Firewall!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Attenzione! � stata rilevata una configurazione di firewall esistente. "
-"Potrebbe avere bisogno di alcuni aggiustamenti manuali dopo l'installazione."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Sto configurando..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Sto configurando gli script, installando il software, avviando i server..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemi nell'installazione del pacchetto %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Ogni cosa � stata configurata.\n"
-"Ora puoi condividere la connessione a Internet con altri computers sulla tua "
-"rete locale (LAN) usando la configurazione di rete automatica (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Il setup � gi� stato fatto, ma � attualmente disabilitato."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Il setup � gi� stato fatto, ed � attualmente abilitato."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr ""
-"Nessuna condivisione della connessione a Internet configurata in precedenza."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configurazione della connessione a Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Benvenuti nell'utilit� di condivisione della connessione a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Cliccate su ``Configura'' se volete lanciare il Wizard di configurazione."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configurazione della rete (%d adattatori)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profilo: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Cancella profilo..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profilo da cancellare:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nuovo profilo..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Nome del profile da creare (il nuovo profilo verr� creato come copia di "
-"quello attuale):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nome host: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Accesso a Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfaccia:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Attendere per favore"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configura l'accesso a Internet"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configurazione LAN (rete locale)"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfaccia"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocollo"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Stato"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configura rete locale (LAN)"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Cliccate qui per lanciare l'assistente ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistente..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Applica"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Per favore attendi... sto applicando la configurazione"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Connesso"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Non connesso"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Connetti..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Disconnetti..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Attenzione, � stata individuata un'altra connessione a Internet, forse "
-"attraverso la vostra rete locale"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Non disponi di nessuna interfaccia configurata.\n"
-"Per prima cosa configurale cliccando su 'Configura'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configurazione rete locale (LAN)"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adattatore %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocollo di boot"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Attivato/a al momento del boot"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "attivare adesso"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "disattivare adesso"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Questa interfaccia non � stata ancora configurata.\n"
-"Lanciate l'assistente di configurazione nella finestra principale."
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Non disponi di una connessione a Internet.\n"
-"Creane una cliccando su 'Configura'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configurazione della connessione a Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configurazione della connessione a Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipo di connessione: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Scheda ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Sto settando il livello di sicurezza"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro di Controllo"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Scegliete l'utilit� che volete usare"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canada (cavo)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA�(bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA�(cavo)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA�(cavo-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Cina�(bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Giappone (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Giappone (cavo)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Europa Orientale"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlanda"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Europa Occidentale"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nuova Zelanda"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Sud Africa"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Per favore, digitate il vostro standard tv e la nazione"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Standard TV:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Area:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Ricerca di canali TV in corso ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Sto cercando canali TV"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uso: keyboarddrake [--expert] [tastiera]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Per favore, scegliete l'impostazione della tastiera."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vuoi che il tasto BackSpace funzioni come Canc nella console?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Cambia il CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Per favore inserisci il Cd-Rom di installazione nel lettore e premi Ok "
-"quando\n"
-"pronto. Se non ce l'hai, premi Annulla per evitare l'aggiornamento diretto."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Non riesco ad avviare l'aggiornamento diretto !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Il cambiamento � stato applicato, ma perch� diventi effettivo dovete uscire "
-"dalla sessione"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Mostralo solo per il giorno selezionato"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/File/_Nuovo"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/File/_Apri"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/File/_Salva"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/File/Save _come"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/File/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opzioni"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opzioni/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Guida"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Aiuto/_Riguardo..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Utente"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Messaggi"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Spiegazioni relative agli strumenti Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "cerca"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Un tool per monitorare i tuoi file di Log"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Impostazioni"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "coincidono"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "ma non coincidono"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Scegliete il file"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "calendario"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Contenuto del file"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Notifica Mail/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "aspetta, sto analizzando: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Configurazione di avvisi email/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Benvenuto nell'utilit� di configurazione degli avvisi email/SMS..\n"
-"\n"
-"Qui potrai configurare il sistema di avvisi.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "Proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "configurazione servizio"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Verrete avvisati se uno dei servizi selezionati non � pi� in esecuzione"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "carica configurazione"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Riceverete una notifica se il carico eccede questo valore"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "configurazione avvisi"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Configurazione del modo in cui il sistema vi avvertir�"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Salva con nome..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Per favore, scegliete il tipo del vostro mouse."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nessun serial_usb trovato\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emula il terzo pulsante?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "Trovato %s su %s, devo configurarlo?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Scegliete uno scanner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Questo scanner %s non � supportato"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Dispositivo di boot"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Questo scanner %s deve essere configurato con printerdrake.\n"
-"Potete lanciare printerdrake dal Centro di controllo Mandrake, sezione "
-"Hardware."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Configurazione del firewall!"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Configurazione del firewall!"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Hai gi� configurato un firewall.\n"
-"Clicca su Configura per modificare o rimuovere il firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Clicca su Configura per configurare un firewall standard"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Scegli la lingua"
-
-# there is no room to put "Scegli classe d'installazione"
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Classe d'installazione"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Ricerca del disco fisso"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configura mouse"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Scegli la tastiera"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sicurezza"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Configura il filesystem"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatta partizioni"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Pacchetti da installare"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installa sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Aggiungi un utente"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configura rete"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configura servizi"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Installa bootloader"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Crea disco di boot"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configura X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Installa aggiornamenti di sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Termina installazione"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configuratore di firewall minimo\n"
-"\n"
-"Configurazione di un firewall personale per questo sistema Mandrake Linux.\n"
-"Per una soluzione firewall potente e dedicata, per favore rivolgiti\n"
-"alla distribuzione specializzata MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Adesso ti faremo domande riguardo i servizi che vuoi rendere disponibili\n"
-"durante la connessione a Internet. Rifletti bene prima di rispondere,\n"
-"perch� la sicurezza del tuo computer � molto importante.\n"
-"\n"
-"Se attualmente non sfrutti qualcuno di questi servizi, ti invitiamo a\n"
-"disabilitarlo. Potrai cambiare queste impostazioni quando vorrai\n"
-"usando di nuovo questa applicazione!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Su questa macchina � in esecuzione un server web che deve essere visibile\n"
-"da Internet? Se si accede a tale server web soltanto da questa macchina\n"
-"puoi rispondere NO tranquillamente.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Su questa macchina � in esecuzione un server dei nomi? Se non ne hai\n"
-"configurato uno per trasmettere informazioni su IP e domini all'intera\n"
-"Internet, per favore rispondi NO.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Vuoi accettare delle connessioni Secure Shell (ssh) in ingresso? ssh\n"
-"pu� essere usato al posto di telnet per effettuare il login. Se adesso\n"
-"stai usando telnet, ti consigliamo di passare a ssh: telnet non effettua\n"
-"la cifratura dei dati, pertanto qualche pirata potrebbe intercettare\n"
-"la tua password. Invece ssh effettua la cifratura e non permette che\n"
-"qualcuno origli alle tue spalle."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Vuoi accettare delle connessioni telnet in ingresso?\n"
-"Come vi abbiamo spiegato prima, � un metodo terribilmente insicuro.\n"
-"Ti consigliamo caldamente di rispondere NO in questo caso, e di\n"
-"usare ssh invece di telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Su questa macchina � in esecuzione un server FTP che deve essere reso\n"
-"accessibile via Internet? In tal caso, ti consigliamo vivamente di\n"
-"usarlo soltanto per collegamenti di tipo Anonimo. Qualsiasi password\n"
-"inviata con FTP pu� essere intercettata da qualche cracker, dato che\n"
-"anche FTP non fa uso di cifratura nel trasmettere le password.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Su questa macchina � in esecuzione un server di posta elettronica? Se\n"
-"inviate messaggi per mezzo di pine, mutt o altri programmi di posta\n"
-"basati su interfaccia a caratteri, allora probabilmente s�. Altrimenti\n"
-"dovreste nasconderlo dietro il firewall.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Su questa macchina � in esecuzione un server POP o IMAP? Questi\n"
-"vengono usati per le necessit� di utenti che hanno account di posta\n"
-"(non basata su interfaccia web) su questa macchina.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Apparentemente usi un kernel della serie 2.2. Se il tuo IP di\n"
-"rete � stabilito automaticamente da un computer connesso con\n"
-"questo (assegnazione dinamica), dobbiamo specificare questa\n"
-"impostazione. Il tuo indirizzo IP � assegnato dinamicamente?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"L'orologio di questo computer viene sincronizzato sulla base di\n"
-"un altro? Per lo pi� questo si verifica in organizzazioni che fanno\n"
-"uso di Unix/Linux di dimensioni medio-grandi, allo scopo di avere\n"
-"dei log di sistema sincronizzati e simili. Se non fai parte di una\n"
-"rete pi� grande e non hai mai sentito parlare di qualcosa del genere,\n"
-"probabilmente puoi rispondere NO."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Configurazione completa. Possiamo scrivere le modifiche su disco?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Non riesco ad aprire %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Non riesco ad aprire %s in scrittura: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "No, il DHCP non mi serve"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "S�, ho bisogno del DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "No, il NTP non mi serve"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "S�, ho bisogno del NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Non salvare"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Salva ed Esci"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Assistente di configurazione del firewall"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "No (usa un firewall per schermarlo da Internet)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "S� (lascia che passi attraverso il firewall)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Per favore attendere... Sto verificando i pacchetti installati"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Non ho potuto installare i pacchetti richiesti: %s e Bastille.\n"
-"Provate a installarli manualmente."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Computer connesso alla rete (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Server NFS, server SMB, server proxy, server SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Workstation grafica con GNOME"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Utilit� per il tuo Palm Pilot o Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Workstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Server di nomi di dominio (DNS) e informazioni sulla rete"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programmi Office: wordprocessor (kword, abiword), fogli elettronici "
-"(kspread, gnumeric), visualizzatori pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Utilit� audio: riproduttori mp3 o midi, mixer, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Libri e Howto su Linux e il software libero"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Workstation grafica con KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Set di utilit� per posta, news, web, file transfer, e chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Server di database PostgreSQL o MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Strumenti per semplificare la configurazione del computer"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Suono"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Programmi di utilit�"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentazione"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Programmi da linea di comando"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Server di posta Postfix, server di news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Computer con accesso a Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Computer multimediale"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configurazione"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Altri desktop grafici (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Il K Desktop Environment, l'ambiente grafico di base con una collezione di "
-"utilit� che lo accompagnano"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ambiente grafico"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache e Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Utilit� per creare e masterizzare CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Postazione di lavoro con programmi Office"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programmi grafici come The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Librerie di sviluppo, programmi e file include per C e C++"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Server di rete"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Posta/Groupware/Newsgroup"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Computer predisposto per i giochi"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Riproduttori video e programmi di editing"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafica"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programmi di svago: azione, da tavolo, strategia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Gruppo di programmi per leggere e inviare posta e news (pine, mutt, tin..) e "
-"per navigare il Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archiviazione, emulatori, monitoraggio"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanza Personale"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Un ambiente grafico con un set di applicazioni user-friendly e utilit� per "
-"il desktop"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clienti per vari protocolli, incluso ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Gateway per Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programmi di riproduzione/modifica audio e video"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Altri desktop grafici"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editor, shell, programmi di utilit� riguardo i file, terminali"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmi per gestire le tue finanze, come gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gestione di informazioni personali"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - Masterizzazione CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Workstation scientifica"
diff --git a/perl-install/share/po/ja.po b/perl-install/share/po/ja.po
deleted file mode 100644
index 6a886fa7d..000000000
--- a/perl-install/share/po/ja.po
+++ /dev/null
@@ -1,15415 +0,0 @@
-# DrakX Japanese Translation.
-# �֡סȡ�
-# for Japanese text use �� and �� instead of ugly \" and \"
-# for ascii text in the transltion you can also use�� and ��
-# also, even if the English text has no lineabreak ( \n ) at
-# all, you must add some if the Japanese text is too long,
-# because the current toolkits are unable to wordwrap Japanese
-# text due to the lack of word delimiters. 
-#
-# Copyright (c) 1999 MandrakeSoft
-# Junichi Kimura <jun@kde.gr.jp>, 1999-2000
-# YAMAGATA Hiroo <hiyori13@alum.mit.edu>, 1999-2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 1999-12-10 16:27+0100\n"
-"Last-Translator: YAMAGATA Hiroo <hiyori13@alum.mit.edu>\n"
-"Language-Team: Japanese\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=euc-jp\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "�إåɤ򤽤줾����Ω������"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Xinerama ��ĥ��Ȥ�"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "�ʲ��Υ����ɤ��������ꡧ ��%s��(%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "�ޥ���إå�����"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"���ʤ��Υ����ƥ�ϥޥ���إåɤ����꤬�Ǥ��ޤ���\n"
-"�ɤ����ޤ�����"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "����ե��å�������"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "����ե��å������ɤ����򤷤Ʋ�����"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "X ����������Dz�����"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X ������"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "X �ɥ饤�Ф�����Dz�����"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X �ɥ饤��"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "�ɤι�����XFree �ˤ��ޤ���"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"���Υ����ɤ�XFree %s �ǤΤ�3D��������졼������ǽ�Ǥ���\n"
-"XFree %s �ǤΤ��Υ����ɤΥ��ݡ��Ȥϡ�2D �Τۤ���������Ƥ��ޤ���"
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "���Υ����ɤ�XFree %s ��3D��������졼������ǽ�Ǥ���"
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "�ϡ��ɥ�����3D��������졼�����Ĥ���XFree %s"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"���Υ����ɤ�XFree %s ��3D��������졼������ǽ�Ǥ���\n"
-"�����������ޤǡ��¸�Ū�ʥ��ݡ��Ȥǡ��ޥ���ե꡼���β�ǽ��������ޤ���"
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "�¸��ʳ��Υϡ��ɥ�����3D��������졼�����Ĥ���XFree %s"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"���Υ����ɤϥϡ���3D��������졼����󤬲�ǽ�Ǥ�����XFree %s��ɬ�פǤ���\n"
-"�����������ޤǡ��¸�Ū�ʥ��ݡ��Ȥǡ��ޥ���ե꡼���β�ǽ��������ޤ���\n"
-"XFree %s �ǤΤ��Υ����ɤΥ��ݡ��Ȥϡ�2D �Τۤ���������Ƥ��ޤ���"
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (���󥹥ȡ���ǥ����ץ쥤�ɥ饤��)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree������"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "����ե��å������ɤΥ��ꥵ���������򤷤Ʋ�����"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "�����ФΥ��ץ���������Dz�����"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "��˥�������Dz�����"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "��˥�"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"����ʥѥ�᡼����2�Ĥ���ޤ�����ľ��ե�å���졼��(�����꡼������\n"
-"������褹�����)�ȿ�ʿ��ե�å���졼��(��������ɽ����������äȤ�\n"
-"����)�Ǥ���\n"
-"\n"
-"*����* ��˥��ε����ϰ���ο�ľ����ʿƱ���ϰϤ���ꤷ�ʤ��ȡ�\n"
-"��˥������᡼��������뤫���Τ�ޤ���\n"
-"ʬ����ʤ�����, ��������ˤ��Ʋ�������"
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "��ʿ��ե�å���졼��"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "��ľ��ե�å���졼��"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "��˥������ꤵ��Ƥޤ���"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "����ե��å������ɤ����ꤵ��Ƥޤ���"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "�����٤����򤵤�Ƥޤ���"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "��������ǻ�Ƥߤޤ�����"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"�ٹ𡧤��Υ���ե��å������ɤ�ƥ��Ȥ���ȥޥ��󤬥ե꡼�����뤫�⤷��ޤ���"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "������ޤ�"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"�����Ĥ��ѥ�᡼�����Ѥ��ƤߤƤ�������"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "���顼ȯ��"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "���� %d �ä����ޤ�"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "����Ϥ���Ǥ����Ǥ�����"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "���顼ȯ���������Ĥ��Υѥ�᡼�����Ѥ��ƤߤƤ�������"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "������"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "�����٤ȿ�����"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "����ե��å�������: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 ������: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "��"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "OK"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "�������ѡ��ȥ⡼��"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "���Ƥ�ɽ��"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "������"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "�����ܡ��ɥ쥤������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "�ޥ����μ���: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "�ޥ����ǥХ���: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "��˥�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "��˥���ʿƱ��: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "��˥���ľ��ե�å���: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "����ե��å�������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "����ե��å������� id: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "����ե��å�����: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 ������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 �ɥ饤��: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X Window System ��������"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "�ɤ����ޤ�����"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "��˥����ѹ�"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "����ե��å������ɤ��ѹ�"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "�����Х��ץ������ѹ�"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "�����٤��ѹ�"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "�����ɽ��"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "�⤦���ƥ���"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "��λ"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"�ѹ�����¸���ޤ���?\n"
-"���ߤ�����ϰʲ����̤�Ǥ�:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X �ε�ư"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"����ԥ塼����֡��Ȥ���������ưŪ�� X ��Ω���夬������ˤǤ��ޤ���\n"
-"��֡��Ȥ����� X ��Ω���夲�ޤ�����"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "�ѹ���ͭ���ˤ���ˤ� %s �˥������󤷤ʤ����Ʋ�����"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "���������Ȥ������ Ctrl-Alt-BackSpace �򲡤��Ʋ�����"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ��(8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "3��2�鿧 (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "6��5�鿧 (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "1600���� (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "40���� (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB �ʾ�"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "����������� VGA, 640x480 �� 60Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "�����ѡ� VGA, 800x600 �� 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 �ߴ�, 1024x768 at 87 Hz ���󥿡��졼�� (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "�����ѡ� VGA, 1024x768 �� 87 Hz ���󥿡��졼��, 800x600 �� 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "��ĥ �����ѡ� VGA, 800x600 �� 60 Hz, 640x480 �� 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "1024x768 at 60 Hz, 800x600 at 72 Hz�ΥΥ󥤥󥿡��쥹SVGA"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "1280x1024 at 70 Hz��High Frequency SVGA"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "1280x1024 at 60 Hz����ǽ�ʥޥ����������˥�"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "1280x1024 at 74 Hz����ǽ�ʥޥ����������˥�"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "1280x1024 at 76 Hz����ǽ�ʥޥ����������˥�"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "1600x1200 at 70 Hz ����ǽ�ʥ�˥�"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "1600x1200 at 76 Hz ����ǽ�ʥ�˥�"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "�֡��ȥѡ��ƥ������κǽ�Υ�����"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "�ɥ饤�֤κǽ�Υ����� (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO �Υ��󥹥ȡ���"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "�֡��ȥ�������ɤ��˥��󥹥ȡ��뤷�ޤ�����"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub �Υ��󥹥ȡ���"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "�ƥ����ȥ�˥塼�� LILO"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "����ե��å���˥塼�� LILO"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "DOS/Windows���鵯ư (loadlin ����)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "�֡��ȥ������Υᥤ�󥪥ץ����"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "���Ѥ���֡��ȥ�����"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "�֡��ȥ������Υ��󥹥ȡ���"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "�֡��ȥǥХ���"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (�Ť� BIOS �Ǥ�ư���ʤ�)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "����ѥ���"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "����ѥ���"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "�ӥǥ��⡼��"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "�ǥե���ȥ��᡼����ư���Ԥ�����"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "�ѥ����"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "�ѥ���� (�⤦����)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "���ޥ�ɥ饤�󥪥ץ���������"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "����"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "�ƥ֡��Ȼ��� /tmp �ʲ���ä�"
-
-# added a \n to the translation to avoid that the dialog window
-# in which it appears to be tooooo laaaaarge
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr ""
-"ɬ�פʤ����Τ�RAM������������Ƥ�������\n"
-"��%d MB�����Ĥ���ޤ�����"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "�ޥ���ץ��ե������ͭ����"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Ram��������MB������"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"�ȥ��ޥ�ɥ饤�󥪥ץ��������¡ɥ��ץ����ϥѥ���ɤ��ʤ���\n"
-"��ˤ����ޤ���"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "�⤦���ٻ�Ʋ�����"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "�ѥ���ɤ����פ��ޤ���"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "�����������"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "�����ץ�ե����०�����Υǥ��쥤"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "�����ͥ�֡��ȤΥ����ॢ����"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "CD ����ε�ư��ͭ���ˤ��ޤ�����"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "OF ����ε�ư��ͭ���ˤ��ޤ�����"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "�ǥե���Ȥ� OS �ϡ�"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"����ȥ�ϰʲ��ΤȤ���Ǥ���\n"
-"�ɲá��ѹ��Ǥ��ޤ���"
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "���"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "��λ"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "�ѹ�"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "�ɤΥ����פ��ɲä��ޤ���"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "¾�� OS (SunOS�ʤ�...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "¾�� OS (MacOS�ʤ�...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "¾�� OS (������ɥ����ʤ�...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "���᡼��"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "�롼��"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "�ɲ�"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "�ɤ߽�"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "�ơ��֥�"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "����"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "��٥�"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "�ǥե����"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd������"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "�ӥǥ��ʤ�"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "����ȥ��ä�"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "����Υ�٥�ϵ�����Ƥ��ޤ���"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "�����ͥ륤�᡼������ꤷ�Ƥ�������"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "root�ѡ��ƥ�������ɬ�����ꤷ�Ƥ�������"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "���Υ�٥�Ϥ��Ǥ˻Ȥ��Ƥ��ޤ�"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s ���󥿡��ե����������Ĥ���ޤ���"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "�̤Τ�ΤϤ���ޤ�����"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "%s ���󥿡��ե������Ϥ���ޤ�����"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "������"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "�Ϥ�"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "�ϡ��ɥ������ξ���򸫤Ʋ�����"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s ������ %s �Υɥ饤�Х��󥹥ȡ�����"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(�⥸�塼�� %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "�ɤ� %s �ɥ饤�Ф��ޤ��礦����"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"%s �ɥ饤�Фϡ�������ư���Τ����̤ʾ����פ��礬����ޤ���������\n"
-"�դĤ��ϡ��ʤˤ�ʤ��������ư����礬�ۤȤ�ɤǤ������̤ʥ��ץ�����\n"
-"���ꤷ�ޤ�����������Ȥ�ɥ饤�Ф˥ޥ����ץ����֤�����ɬ�׾�������\n"
-"�����Ƥߤޤ��������ץ�������˥���ԥ塼������ߤ��뤫���Τ�ޤ��󤬡�\n"
-"�ޥ��󤬤���줿�ꤹ�뤳�ȤϤ���ޤ���"
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "�����ȥץ�����"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "���ץ�������"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"�Ǥϥ⥸�塼�� %s �Υ��ץ�������ꤷ�Ƥ���������\n"
-"�ʤ������ɥ쥹�Ϥ��٤ơ�Ƭ�� 0x ��Ĥ������Ϥ��뤳�ȡ��㡧 '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"�⥸�塼�� %s �ؤΥ��ץ����λ��ꡣ\n"
-"���ץ����Υե����ޥåȤϡ�̾��=�� ̾��2=��2 ...�ɤǤ���\n"
-"��: ��io=0x300 irq=7��"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "�⥸�塼��Υ��ץ����"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"�⥸�塼�� %s �Υ����ɤ��Ǥ��ޤ���Ǥ�����\n"
-"�ѥ�᡼�����Ѥ��Ƥ��ʤ����Ƥߤޤ�����"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "X �ץ������ؤΥ�������"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "rpm �ġ���ؤΥ�������"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "��su�ɤ����"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "�����ե�����ؤΥ�������"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s ���ɲúѤ�)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "�ѥ���ɤ���ñ�����ޤ�"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "�桼��̾��Ϳ���Ʋ�����"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "�桼��̾�ˤϱѾ�ʸ������������-�פ��_�פ����Ȥ��ޤ���"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "���Υ桼��̾�Ϥ��Ǥ�¸�ߤ��ޤ�"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "�桼�����ɲ�"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"�桼��̾�����Ϥ��Ʋ�����\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "�����դ���桼��"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "�ºݤλ�̾"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "�桼��̾"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "������"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "��������"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "��ư��������"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"��ưŪ������桼�����������󤹤�褦�˥���ԥ塼��������Ǥ��ޤ���\n"
-"���ε�ǽ��Ȥ��ޤ�����"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "�ǥե���ȥ桼��������:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "�Ȥ�������ɥ��ޥ͡����������Dz�������"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "�ɤθ����Ȥ�������Ǥ��������͡�"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "���󥹥ȡ������Ѳ�ǽ�ˤʤ�ۤ��θ��������Ǥ��ޤ�"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "�����"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "���٤ƤΥ桼����ǧ���"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "��������"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "�ե����붦ͭ���ʤ�"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "�ѥå����� %s ��ɬ�פǤ������󥹥ȡ��뤷�ޤ�����"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "�������ݡ��Ȥˤ� NFS �� Samba ���Ȥ��ޤ����ɤ���ˤ��ޤ�����"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "ɬ�ץѥå����� %s ������ޤ���"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "����󥻥�"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "userdrake ��ư"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"�桼����ζ�ͭ�ϡ���fileshare�ɥ��롼�פ�Ȥ��ޤ���\n"
-"���Υ��롼�פ˥桼�����ɲä���ˤϡ�userdrake ���Ȥ��ޤ��衣"
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "�����ʥ���å����ͤ⿯�����ۤ�����"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "�������㤤"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "ɸ��"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "�⤤"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "��äȹ⤤"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "���м��ʤۤɹ���"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"���Υ�٥��Ȥ��ʤ����դ�ɬ�פǤ��������ƥ��Ȥ��Τϴ�ñ�ˤʤ�ޤ�����\n"
-"����ˤǤ⥢�������Ǥ��Ƥ��ޤ��ޤ���¾�Υޥ���䥤�󥿡��ͥå�\n"
-"�ˤĤʤ��ä��ޥ���ǤϻȤ�ʤ��Ǥ����������ѥ�������¤⤢��ޤ���"
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"�ѥ���ɤ�ͭ���ˤʤ�ޤ��������ͥåȥ���ˤĤʤ��ΤϤޤ�\n"
-"������Ǥ��ޤ���"
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"�����ɸ��Υ������ƥ��ǡ����饤����ȤȤ��ƥ��󥿡��ͥå���³����ޥ����"
-"�ο侩��٥�Ǥ���"
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr "���Ǥ����¤������äƤ��ơ���������ռ�ư�����å�����äȤ�����ޤ���"
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"���Υ������ƥ���٥���ȡ������ƥ�򥵡��ФȤ��ƻȤ���褦�ˤʤ�ޤ���\n"
-"¿���Υ��饤����Ȥ�����³������륵���ФȤ��Ƥ�Ȥ�������Υ������ƥ�\n"
-"���ˤʤäƤ��ޤ����𡧤��ʤ��Υޥ��󤬥��󥿡��ͥåȾ�Υ��饤��������Ѥ�"
-"�顢��ä��㤤��٥��������ۤ��������Ǥ��衣"
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"���Υ�٥�˴�Ť��Ƥ��ޤ���������ǥ����ƥ�ϴ����ˤȤ�������\n"
-"�ˤʤäƤ��ޤ����������ƥ��Ϻ���Ǥ���"
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "�������ƥ��ο�������Ǥ�������"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "�������ƥ����"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "�����Ф�libsafe��Ȥ�"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"�Хåե������С��ե�����ե����ޥåȥ��ȥ�󥰹�����ɸ椹��饤�֥�ꡣ"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"%s operating system chooser-he youkosou!\n"
-"\n"
-"Ichiran kara erande <ENTER> wo oshimasu. %d byou de Default ni narimasu.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "GRUB operating system chooser-he youkosou!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "%c, %c key wo tukatte entry wo shitei shite kudasai."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Kono OS wo kidou suru nara Enter, Kidou mae no jikkou command"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "no henshuu niha 'e', command line nara 'c' wo oshi masu."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Sentaku shita OS ga %d byou de jidoutekini kidou shimasu."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "/boot ��������­�Ǥ�"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "�ǥ����ȥå�"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "�������ȥ�˥塼"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "�֡��ȥ������� %s �ѡ��ƥ������ˤϥ��󥹥ȡ���Ǥ��ޤ���\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "�إ�פϤޤ���������Ƥ��ޤ���\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "��ư����������"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/�ե�����(F)"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/�ե�����(F)/��λ(Q)"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "�����������ʬ�व����˥�"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "�����������˥�"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "�դĤ��Υ�˥�"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "�դĤ��� Gtk+ ��˥�"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "��ư����Aurora��¹�"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub �⡼��"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot �⡼��"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"���ޡ��֡��ȥޥ͡�����ˤ� %s �򤪻Ȥ��Ǥ���\n"
-"���ꥦ�������ɤ�ư����ˤϡ�����פ򥯥�å����ޤ��礦��"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "����"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "�����ƥ�⡼��"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "��ư���� X ������ɥ���¹�"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "��ư��������Ϥ��ʤ�"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "���� (�桼�����ǥ����ȥåסˤǼ�ư�������󤹤�"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "/etc/inittab ���ɤߤȤ��Ѥ˳����ޤ���: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "���� %d ʬ"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "���� 1 ʬ"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "���� %d ��"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "�ѡ��ƥ��������ɲä���ޤǥ����꡼�󥷥�åȤϻ���ޤ���"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "%s �Υ��󥹥ȡ����˥����꡼�󥷥�åȤ���ǽ�Ǥ�"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "�ե��"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "�������ꥫ"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "�٥륮��"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "���������¹�"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "�ɥ���"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "���ꥷ��"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "�Υ륦����"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "���������ǥ�"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "������"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "�����ꥢ"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "�������ȥꥢ"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "����ꥫ�罰��"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "�ǡ����ΥХå����åפ��äƲ�����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "�褯�ɤ�Dz�������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"�⤷ aboot ��Ȥ��Ĥ��ʤ顢�ǥ���������Ƭ�˶����ΰ� (2048���������餤)\n"
-"��Ĥ��褦�����դ��Ʋ�������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "���顼"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "����������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "ư�������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"�ϡ��ɥǥ��������Τ��礭�� FAT �ѡ��ƥ�������Ĥ����Ǥ���\n"
-"�ʤ��֤�MS Dos/������ɥ����Τ�ΤǤ��ˡ�\n"
-"�ޤ��Ϥ����Ĥ�ꥵ��������Τ������Ǥ��礦\n"
-"�ʤ��Υѡ��ƥ������򥯥�å����ơ����ˡ֥ꥵ�����פ򥯥�å����Ʋ�����)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "�ѹ�����ѡ��ƥ������򥯥�å����Ƥ�������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "�ܺ�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "���㡼�ʥ�󥰥ե����륷���ƥ�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "����å�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "��"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "����¾"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "�ե����륷���ƥ� ������:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "����ˡ�%s�ɤ�ȤäƲ�����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "���"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "�ǽ�ˡ֥���ޥ���ȡפ�ȤäƲ�����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"�ѡ��ƥ������η��� %s ���ѹ������塢���Υѡ��ƥ�������Υǡ����ϼ�����"
-"��"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "�ѡ��ƥ�����������"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "�̤Υѡ��ƥ�����������"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "��λ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "�������ѡ��ȥ⡼�ɤ˰ܤ�"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "�Ρ��ޥ�⡼�ɤ˰ܤ�"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "��Ȥ��᤹"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "����Ǥ�³���ޤ�����"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "�����֤�����λ"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "�ѡ��ƥ������ơ��֥�򹹿������˽�λ��"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr " /etc/fstab ���ѹ�����¸���ޤ�����"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "��ư�������"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "���Ƥ򥯥ꥢ"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "�ϡ��ɥɥ饤�֤ξ���"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "���ƤΥץ饤�ޥ�ѡ��ƥ�����󤬻Ȥ��Ƥ��ޤ�"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "����ʾ�Υѡ��ƥ��������ɲäǤ��ޤ���"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"�ѡ��ƥ����������䤷�����ʤ顤��ĥ�ѡ��ƥ������\n"
-"����褦�ˤɤ����Υѡ��ƥ�������ä��Ʋ�������"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "�ѡ��ƥ������ơ��֥����¸"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "�ѡ��ƥ������ơ��֥�����"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "�ѡ��ƥ������ơ��֥��Ĥ�"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "�ѡ��ƥ������ơ��֥����ɹ�"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "��ࡼ�Х֥��ǥ�����ư�ƥޥ������"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "�ե����������"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"�Хå����åפ���ѡ��ƥ������ơ��֥�Υ��������㤤�ޤ�\n"
-"³���ޤ�����"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "�ٹ�"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"�ե��åԡ���ɥ饤�֤��������Ƥ�������\n"
-"�ե��åԡ�������ƤΥǡ����ϼ����ޤ�"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "�ѡ��ƥ������ơ��֥��߽Ф��Ƥߤޤ�"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "�ܺ٤ʾ���"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "�ޥ���ȥݥ����"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "���ץ����"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "�ꥵ����"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "��ư"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "�ե����ޥå�"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "�ޥ����"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "RAID �˲ä���"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "LVM �˲ä���"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "����ޥ����"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "RAID �������"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "LVM �������"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAID���ѹ�"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "�롼�ץХå��λ���"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "�������ѡ��ƥ����������"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "���ϥ�����: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "MB �ǤΥ�����: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "�ե����륷���ƥॿ����: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "�ޥ���ȥݥ����: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "�ץ�ե����: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "�롼�ץХå��ե�����������ޤ�����"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "�ѡ��ƥ�����󥿥��פ��ѹ�"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "�ɤΥե����륷���ƥ�ˤ��ޤ�����"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "ext2 ���� ext3 ���ѹ����Ƥ��ޤ�"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "�롼�ץХå��ե����� %s ��ɤ��˥ޥ���Ȥ��ޤ�����"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "�ǥХ��� %s ��ɤ��˥ޥ���Ȥ��ޤ�����"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"���Υѡ��ƥ������ϥ롼�ץХå��ǻȤ��Ƥ���Τǡ�\n"
-"�ޥ���ȥݥ���Ȥ����꽢�����Ȥ�����ޤ���\n"
-"�ޤ��롼�ץХå��������Ƥ���������"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "fat �ե����륷���ƥ�ζ�����׻�"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "�ꥵ������"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "���Υѡ��ƥ������ϥꥵ�����Ǥ��ޤ���"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "���Υѡ��ƥ�������Υǡ����ϥХå����åפ���٤��Ǥ�"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "�ꥵ������ˤϡ��ѡ��ƥ������ %s ��Υǡ����ϼ����ޤ�"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "������������������"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "MB �ǤΥ�����: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "�ɤΥǥ������˰�ư���ޤ���?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "������"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "�ɤΥ��������ư���ޤ�����"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "��ư��"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "�ѡ��ƥ��������ư��..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "�ɲä����¸�� RAID ������Dz�����"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "����"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "�ɲä����¸�� LVM ������Dz�����"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM ̾�ϡ�"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "���Υѡ��ƥ������ϥ롼�ץХå��ˤϻȤ��ޤ���"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "�롼�ץХå�"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "�롼�ץХå��ե�����̾: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "�ե�����̾������"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "�ե�����Ϥ��Ǥ��̤Υ롼�ץХå��ǻ����档¾�Τ����Ӥޤ��礦"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "�ե�����Ϥ��Ǥ�¸�ߤ��ޤ������ޤ���Τ�Ȥ��ޤ�����"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "�ޥ���ȥ��ץ����"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "����¾"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "�ǥХ���"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "��٥�"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "����󥯥�����"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "����: �������ϴ����Ǥ���"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "�ɤ�ʥѡ��ƥ������Ǥ�����"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"�����ʤ����������ϥɥ饤�֤Τ��ʤ���Τۤ�(������>1024)�ʤΤ�\n"
-"������ /boot �Ϻ��ޤ���/boot���������ȡ�LILO �����ޤ�Ư���ʤ�����\n"
-"LILO ��Ȥ�ʤ��ʤ� /boot ���פ�ޤ��󤫤�"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"���ޥ롼��(/)�Ѥ�������ѡ��ƥ������ϡ�ʪ��Ū�˥ɥ饤�֤���Ƭ����\n"
-"1024 ���������󤯤ˤ��äơ�����ˤ��ʤ���/boot �ѡ��ƥ�������\n"
-"���äƤ��ޤ���͡�LILO ��֡��ȥޥ͡�����˻Ȥ��ʤ顤/boot �ѡ��ƥ�\n"
-"�������ɲä�˺��ʤ���"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"���ʤ��ϥ롼��(/)�ȤȤ��ƥ��եȥ�����RAID�ѡ��ƥ����������Ӥޤ����͡�\n"
-"/boot �ѡ��ƥ������̵���Ǥ�����������֡��ȥ������Ϥ���ޤ���\n"
-"�Ǥ����� /boot �ѡ��ƥ��������ɲä�˺��ʤ���"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "�ɥ饤�� %s �Υѡ��ƥ������ơ��֥��ǥ������˽񤭹��ߤޤ���"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "��֡��Ȥ��ƥѡ��ƥ������ơ��֥���ѹ���ȿ�Ǥ�����ɬ�פ�����ޤ�"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "�ե����ޥåȤ����顢�ѡ��ƥ������ %s ��Υǡ����ϼ����ޤ���"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "�ե����ޥå���"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "�롼�ץХå��ե����� %s ��ե����ޥå���"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "�ѡ��ƥ������ %s ��ե����ޥå���"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "�ե�����򱣤�"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "�������ѡ��ƥ������˥ե�������ư"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"�ǥ��쥯�ȥ� %s �ˤϤ��Ǥ˥ǡ���������ޤ�\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "�������ѡ��ƥ������˥ե�������ư��"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "%s ���ԡ���"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "%s �����"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "�ѡ��ƥ������ %s �Ϥ���� %s�ˤʤ�ޤ�����"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "�ǥХ���: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS �ǥХ����쥿��: %s (����)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "������: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "̾��: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "����: ������ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "������: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ������"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "������ %d ���饷���� %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "�ե����ޥåȺѤ�\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "̤�ե����ޥå�\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "�ޥ���ȺѤ�\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"�롼�ץХå��ե�����:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"�ǥե���Ȥǥѡ��ƥ������֡���\n"
-"    (MS-DOS �Υ֡���, lilo �ǤϤʤ�)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "��٥� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "����󥯥����� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID�ǥ����� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "�롼�ץХå��ե�����̾: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"���Υѡ��ƥ������Ϥɤ���\n"
-"�ɥ饤�С��ѡ��ƥ������餷���Ǥ��衣\n"
-"������ʤ��ۤ��������Ǥ��礦��\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"�������̤� Bootstrap\n"
-"�ѡ��ƥ������ϡ�\n"
-"�ǥ奢��֡��ȥ����ƥ��ѤǤ���\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "������: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "������ȥ�: %s ������, %s �إå�, %s ������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "����: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM�ǥ����� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "�ѡ��ƥ������ơ��֥륿����: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "�Х� %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "���ץ����: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "�ե�����Ź沽�θ�"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "�ե����륷���ƥ�Ź沽�Ѥθ�������Ǥ�������"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "���ΰŹ渰�ϴ�ñ�����ޤ��ʺ���Ǥ� %d ʸ���ȤäƤ���������"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "�Ź渰�����פ��ޤ���"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "�Ź渰"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "�Ź渰�ʤ⤦�������Ϥ��Ƥ���������"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "�����פ��ѹ�"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "��ǥ����򥯥�å����Ƥ�������"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "�����Ф򸡺�"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s �ե����ޥå�, %s ����"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "%s �� ������ %s �ǥե����ޥåȤ�����ˡ���Τ�ޤ���"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "�ѡ��ƥ������ %s ��ǥ��쥯�ȥ� %s �˥ޥ���ȤǤ��ޤ���Ǥ���"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck ���ԡ�exit code  %d �ޤ��� signal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s �򥢥�ޥ������˥��顼: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "��ñ��"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "/usr ��"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "������"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "16MB�ʲ��Υѡ��ƥ������� JFS �ϻȤ��ޤ���"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB�ʲ��Υѡ��ƥ������� ReiserFS �ϻȤ��ޤ���"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "�ޥ���ȥݥ���Ȥ� / �ǻϤޤ�ɬ�פ�����ޤ�"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "�ѡ��ƥ������ϥޥ���ȥݥ���� %s �˥ޥ���ȺѤ�\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "LVM �����ܥ�塼��ϥޥ���ȥݥ���� %s �ˤϻȤ��ޤ���"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "���Υǥ��쥯�ȥ�� root �ե����륷���ƥ���˻Ĥ��Ƥ�������"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"���Υޥ���ȥݥ���Ȥˤϡ��ºߤ���ե����륷���ƥ� (ext2, reiserfs) \n"
-"��ɬ�פǤ���\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "�ޥ���ȥݥ���� %s �ˤϰŹ沽�ե����륷���ƥ�ϻȤ��ޤ���"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "��ư������Ƥ��Ǥ���ۤɶ������̤�����ޤ���"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "���뤳�Ȥ�����ޤ���"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "�񤭹��ߤΤ��� %s �򳫤��Ȥ����顼��ȯ��: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"���顼ȯ�� - �������ե����륷���ƥ���ۤǤ���褦�ʥǥХ�����\n"
-"���դ���ޤ��󡣤ʤˤ����������ϡ��ɥ�����������å����Ƥ�������"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "�ѡ��ƥ�����󤬤���ޤ���"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux �ϥޥ���桼�������ƥ�Ǥ����Ĥޤ�ƥ桼���ϼ�ʬ�ι����������\n"
-"�ե�������Ƥޤ����ܤ����ϡ��桼���������ɤ��ɤ�Ǥ���������\n"
-"�Ǥ�����ԤǤ��� root �ȤϤ����äơ����ʤ����������ɲä���桼���ϡ���ʬ\n"
-"�Υե�����ȼ�ʬ������ʳ��Τ�Τ��Ѥ��븢�¤�����ޤ��󡣼�ʬ�Ѥ˾��ʤ�\n"
-"�Ȥ��İ��̥桼�����äƤ����������դĤ��Ȥ��Ȥ��ˤϡ����Υ�������Ȥ�\n"
-"�Ȥ��ޤ������� root �ǥ������󤹤�ȼ�֤Ͼʤ��ޤ������ȤäƤ�����Ǥ�!\n"
-"����äȤ����ޤ������ǥ����ƥबư���ʤ��ʤ꤫�ͤޤ��󡣤⤷���̥桼����\n"
-"�ɼ�ʥߥ��򤷤Ƥ⡢��������򼺤����⤷��ޤ��󤬡������ƥ����Τˤϱƶ�\n"
-"���ޤ���\n"
-"\n"
-"�ޤ�����̾������ޤ��������ɬ������ɬ�פ���ޤ��󡣼ºݤˤϹ����ʤ�Τ�\n"
-"������ޤ�������� drakX �Ϥ��ʤ������Ϥ����ǽ��ñ���Ȥäơ������\n"
-"�桼��̾�ǻȤ��ޤ�������ϡ����Υ桼���������ƥ�˥������󤹤�Ȥ���̾��\n"
-"�ˤʤ�ޤ���������Ѥ��뤳�Ȥ�Ǥ��ޤ������줫��ѥ���ɤ����Ϥ��ޤ���\n"
-"�ø��ʤ��Ρʰ��̡˥桼���Υѥ���ɤϡ��������ƥ��δ�������� root ��\n"
-"�ѥ���ɤۤɽ��פǤϤ���ޤ��󤬡�������Ȥ��äư°פʤ��ȤϤ��ʤ��Ǥ�\n"
-"�����������ʤ��Υե����뤬�����ˤ��餵��ޤ���\n"
-"\n"
-"�֥桼�����ɲáפ򥯥�å������顢�����ʤ����桼�����ɲäǤ��ޤ�����֤�\n"
-"���줾��˥�������Ȥ�Ĥ���ޤ��礦�����㤵������ʬ�Ǥ⡣�����ʤ�����\n"
-"�桼�����ɲä��������顢�ִ�λ�פ򲡤��ޤ��礦��\n"
-"\n"
-"�ֹ��٤�����ץܥ���򲡤��ȡ����Υ桼���Υǥե���ȤΥ�������Ѥ�����\n"
-"���ʥǥե���Ȥ� bash��"
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"�ϡ��ɥǥ�������˸��Ф��줿����¸�� Linux �ѡ��ƥ���������\n"
-"�����ޤ������������ɤ�����򤽤Τޤޤˤ��Ƥ����Ƥ⤤���Ǥ��礦��\n"
-"�̾�����Ѥˤ����ꤢ��ޤ���������Ѥ����顢����Ǥ� root\n"
-"�ѡ��ƥ������ʡ�/�סˤ���ꤷ�Ƥ������������ޤ꾮�����ѡ��ƥ������\n"
-"�򤳤������֤ȡ����եȤ������ڤ�ʤ��ʤ�ޤ��衣�ޤ����ǡ������̤�\n"
-"�ѡ��ƥ������˵���������С���/home�פ���ꤷ�ޤ��礦�ʤ���ϡ�\n"
-"Linux �ѡ��ƥ������ʣ���ʤ����Բ�ǽ�Ǥ����ˡ�\n"
-"\n"
-"\n"
-"���ʤߤ˳ƥѡ��ƥ������ϰʲ��ν񼰤ǵ󤬤äƤ��ޤ�: ��̾���ס����̡�\n"
-"\n"
-"\n"
-"��̾���פϼ��ν񼰤Ǥ�: �֥ϡ��ɥǥ���������ס֥ɥ饤���ֹ��\n"
-"�֥ѡ��ƥ�������ֹ�סʤ��Ȥ��С�hda1��)\n"
-"\n"
-"\n"
-"�֥ϡ��ɥǥ���������פϡ�IDE �ǥ������ʤ��hd�פǡ�SCSI �ʤ��sd��\n"
-"�Ǥ���\n"
-"\n"
-"\n"
-"�֥ɥ饤���ֹ�פϡ���hd�פ��sd�פθ�ˤĤ�ʸ���Ǥ���IDE�ʤ�:\n"
-"\n"
-"   * ��a�פϥץ饤�ޥꥳ��ȥ������Υޥ����ǥ�����\n"
-"\n"
-"   * ��b�פϥץ饤�ޥꥳ��ȥ������Υ��졼�֥ǥ�����\n"
-"\n"
-"   * ��c�פϥ��������IDE����ȥ������Υޥ����ǥ�����\n"
-"\n"
-"   * ��d�פϥ��������IDE����ȥ������Υ��졼�֥ǥ�����\n"
-"\n"
-"\n"
-"SCSI �ϡ��ɥǥ������ξ�硢��a�פ�SCSI ID�ֹ�Ǿ��Υǥ�������\n"
-"��b�פϤ��μ���ID�ֹ桢�Ȥ������Ǥ�"
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux ���󥹥ȡ����CD-ROM����ˤޤ�����ޤ���DrakX\n"
-"�ϡ�������ѥå��������̤�CD-ROM��ˤ���Ȥ��ϡ����ޤ�CD��\n"
-"�Ǥ��Ф��ơ�ɬ�פ��̤� CD �������褦�׵ᤷ�ޤ���"
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"�Ǥϡ������ƥ�ˤɤ�ʥ��եȤ򥤥󥹥ȡ��뤹�뤫���ꤷ�ޤ��礦��\n"
-"Mandrake Linux �ǻȤ��륽�եȤϲ���Ȥ���ޤ�����������Ф�����ͤ�\n"
-"���ޤ���\n"
-"\n"
-"CD-ROM �����ɸ�।�󥹥ȡ���򤷤Ƥ���ʤ顢�ޤ��������CD�򶵤���褦\n"
-"�����ޤ��ʥ������ѡ��ȥ⡼�ɤǤΤߡˡ������CD�Υ�٥��Ĵ�٤ơ�����\n"
-"���ȡ����Ѥ˻Ȥ���CD�Υ����å��ܥå�����ϥ��饤�Ȥ��ޤ��礦����������\n"
-"����OK�򥯥�å����ޤ���\n"
-"\n"
-"�ѥå������ϡ��ޥ���λȤ����˱����ƥ��롼�פ��ȤˤޤȤ���Ƥ��ޤ���\n"
-"���롼�׼��Τ⣴�Ĥ���ʬ����������Ƥ��ޤ�:\n"
-"\n"
-" * �֥�����ơ�������: ������ơ������Ȥ��ƥޥ����Ȥ��ʤ顢�ʲ���\n"
-"���롼�פǻȤ���Τ��������Ӥޤ��礦��\n"
-"\n"
-" * �ֳ�ȯ��: �ޥ����ץ�����ߥ󥰤˻Ȥ��ʤ顢�ʲ�����ۤ������롼�פ�\n"
-"�����ĤǤ����Ӥޤ��礦��\n"
-"\n"
-" * �֥����С�: ���줬�������ѥޥ���ˤʤ�ʤ顢�ޥ���˥���\n"
-"�ȡ��뤷��������Ū�ʥ����ӥ��򤳤������٤ޤ���\n"
-"\n"
-" * �֥���ե��å��Ķ���: �Ǹ�ˡ������ǤϹ��ߤΥ���ե��å��Ķ������Ӥޤ���\n"
-"����ե��å�������ơ�����󤬤ۤ�����С������Ĥ����Ӥޤ��礦!\n"
-"\n"
-"�ޥ����Υ�������򥰥롼��̾���ư�����ȡ����Υ��롼�פˤĤ��Ƥ�û��\n"
-"�������Ǥޤ����̾磻�󥹥ȡ�����ʥ��åץ��졼�ɤǤϤʤ��ˤ˲���\n"
-"���롼�פ����Фʤ��ȡ��������������ݥåץ��åפ��ơ��Ƽ�κ����\n"
-"���󥹥ȡ������Ƥ��Ƥ���ޤ���\n"
-"\n"
-" * ��X ��Ȥ��ץ��󥹥ȡ���ϡ�����ե��å��ǥ����ȥåפ�¸�����\n"
-"ɬ�׺���¤Υѥå����������򥤥󥹥ȡ��뤷�ޤ�;\n"
-"\n"
-" * �ִ���Ū��ʸ��������״��ܥ����ƥ�ȡ����ܥ桼�ƥ���ƥ���\n"
-"���Υɥ�����ơ�������Ƴ�������Υ��󥹥ȡ���ϥ����������Ѥ�\n"
-"�����Ƥ��ޤ���\n"
-"\n"
-" * �������˺���¤Υ��󥹥ȡ���פȤˤ���LInux�����ƥ���Ư������\n"
-"ɬ�׺���¤Τ�Τ����򥤥󥹥ȡ��롣���ޥ�ɥ饤��Τߡ����Υ��󥹥ȡ���\n"
-"�������� 65Mb ���٤Ǥ���\n"
-"\n"
-"�ָ��̥ѥå�����������ץ��ץ���������å����뤳�Ȥ�Ǥ��ޤ���\n"
-"�󶡤���Ƥ���ѥå���������Τ��Ƥ��뤫�����󥹥ȡ��뤵����Τ�\n"
-"�������İ���������Ф����Ȥ��ޤ���\n"
-"\n"
-"���󥹥ȡ����ֹ����ץ⡼�ɤdz��Ϥ����顢�����롼�פ�������ˤ���\n"
-"�ȿ������ѥå����������줺�ˡ���¸�����ƥ�ν��������򤹤�����ˤ�\n"
-"��ޤ���"
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"�Ǹ�ˡ��ָ��̥ѥå�����������פ���������ɤ����ˤ�äƤ�\n"
-"���٤ƤΥѥå����������롼�פ��Ȥ�ʬ�व��ƥĥ꡼ɽ������ޤ���\n"
-"���Υĥ꡼�򸫤ʤ��顢���롼�פ䥵�֥��롼��ñ�̡��ޤ��ϸ���\n"
-"�ѥå�����������������������Ǥ��ޤ���\n"
-"\n"
-"�ĥ꡼�Υѥå����������֤ȡ����ˤ����������Фޤ������ӽ���ä���\n"
-"�֥��󥹥ȡ���ץܥ���򲡤��ޤ��礦�����󥹥ȡ��뤬�Ϥޤ�ޤ���\n"
-"�ϡ��ɥ�������®�٤�������ѥå������ο��ˤ�äƤϡ����󥹥ȡ���\n"
-"��λ�ޤǤˤ��ʤ���֤�������ޤ�����λ�ޤǤο�����郎ɽ�������\n"
-"�Τǡ�����򸫤Ƥʤ�Ǥ����餪��Ǥ�ɤ�����\n"
-"\n"
-"!! �����Хѥå�������������ꡢ���뤤�Ϥ��줬�ɤ����Υ��롼�פ�\n"
-"�ޤޤ�Ƥ������ˤϡ����Υ����Ф������˥��󥹥ȡ��뤷��������\n"
-"��ǧ������ޤ���Mandrake Linux�Ǥϡ����󥹥ȡ��뤵�줿������\n"
-"�ϥǥե���Ȥǵ�ư���ˤ���������ޤ������Υǥ����ȥ�ӥ塼�����\n"
-"�вٻ��ˤϰ��������꤬�Τ��Ƥ��ʤ��Ƥ⡢���ΥС�����������\n"
-"�������ƥ��ۡ��뤬���Ĥ��뤫�⤷��ޤ��󡣤⤷���Υ����ӥ�������\n"
-"����Τ�Τ����ʤ����󥹥ȡ��뤵���Τ����狼��ʤ���С֤�������\n"
-"�򥯥�å����ޤ��礦���֤Ϥ��פ򥯥�å�����ȡ������Υ����ӥ���\n"
-"���󥹥ȡ��뤵��ơ��ǥե���Ȥǵ�ư���ˤ���������ޤ��� !!\n"
-"\n"
-"�ְ�¸�ط��μ�ư���ץ��ץ��������֤ȡ����󥹥ȡ��餬��ưŪ��\n"
-"�ѥå�������������Ȥ��ˤ�ٹ�������������Фޤ��󡣤ʤ�����˥�\n"
-"�å����������֤��ȸ����ȡ��ۤ��Υѥå������򥤥󥹥ȡ��뤹��Ȥ�\n"
-"��ɬ�פȤʤ�ѥå����������äơ����줬�ʤ��ȥ��󥹥ȡ��뤬��λ��\n"
-"�ʤ�����Ǥ���\n"
-"\n"
-"�����β��ˤ��뾮���ʥե��åԡ��ǥ������Υ�������ϡ������Υ���\n"
-"�ȡ������������ѥå������������ɤ߹��ि��Τ�ΤǤ������Υ���\n"
-"��������֤ȡ������Υ��󥹥ȡ���κǸ�˺�ä��ե��åԡ��������\n"
-"�褦�˻ٻ����Фޤ������������ե��åԡ��κ�����ϡ��������Υ��ƥå�\n"
-"�������ܤΥҥ�Ȥ��ɤ�Ǥ���������"
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"�����Ǥϡ����󥿡��ͥå�/�ͥåȥ����³�����꤬�Ǥ��ޤ����ޥ����\n"
-"���󥿡��ͥåȤ�LAN�ˤĤʤ������ʤ��OK�פ򥯥�å����Ƥ���������\n"
-"�ͥåȥ���ǥХ������ǥ�μ�ư���Ф����Ϥ���ޤ����⤷���θ���\n"
-"�����ޤ������ʤ���С�����ϡּ�ư���Ф�Ȥ��פΥ����å���Ϥ�����\n"
-"�����ޤ��礦���ޤ��ͥåȥ������򤷤ʤ������뤤�ϸ�󤷤ˤ�Ǥ�\n"
-"�ޤ������ξ��ˤϡ֥���󥻥�פ򥯥�å���������Ǥ���\n"
-"\n"
-"��ǽ����³�ϡ����̤Υ�ǥࡢISDN��ǥࡢADSL��³�������֥��ǥࡢ������\n"
-"�̾��LAN��³�ʥ������ͥåȡˤǤ���\n"
-"\n"
-"�����Ǥ�����κ٤����äϤ��ޤ��󡣤��������󥿡��ͥåȥ����ӥ��ץ��Х���\n"
-"�䥷���ƥ�����Ԥˤ��ä��ѥ�᡼���������Ѱդ��Ƥ����Ƥ���������\n"
-"\n"
-"����ξܺ٤ϡ��ޥ˥奢��Υ��󥿡��ͥå���³�ξϤ򸫤뤫�����뤤��ñ��\n"
-"�����ƥ����꤬����Ǥ��顢��������������ץ�������Ȥä���³�����ꤷ\n"
-"�ޤ��礦��\n"
-"\n"
-"�ͥåȥ��������ϥ��󥹥ȡ����ˤ�ꤿ�������뤤�ϥͥåȥ�����꤬\n"
-"����Ǥ���ʤ�֥���󥻥�פ򲡤��ޤ���"
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"�Ǥϥޥ���ε�ư���˼�ưŪ�˳��Ϥ����������ӥ������Ӥޤ��礦��\n"
-"\n"
-"�����ˤϸ��ߤΥ��󥹥ȡ���ǻȤ��륵���ӥ��������󤬤äƤ��ޤ���\n"
-"�褯���ơ���ư����ɬ������ɬ�פʤ���ΤΥ����å���Ϥ����ޤ��礦��\n"
-"\n"
-"�ƥ����ӥ������֤ȡ��������Фޤ����Ǥ⡢���Υ����ӥ������Ω�Ĥ�\n"
-"�狼��ʤ���С��ǥե���ȤΤޤޤˤ��Ƥ����ۤ���̵��Ǥ���\n"
-"\n"
-"���Υޥ���򥵡��Фˤ���Ĥ��ʤ顢�����Ǥ��ä˵���Ĥ��ޤ��礦��\n"
-"�Ȥ�ʤ������ӥ�����ߤ˳��Ϥ����ƤϤ����ޤ��󡣰����Υ����ӥ��ϡ�\n"
-"�����о�ǻȤ��ȴ������Ȥ����Τ�˺��ʤ���\n"
-"���̤ˡ�������ɬ�פʥ����ӥ���������Ǥ���������"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux �ϻ��֤� GMT (����˥å�ɸ���) �Ǵ������ơ����Ф줿�����Ӥ�\n"
-"��Ȥ˸��ϻ��֤��Ѵ����ޤ����Ǥ⡢�֥ϡ��ɥ����������å���GMT�ˤ��碌���\n"
-"��������ˤ���С�������������ơ��ϡ��ɥ����������å��ȥ����ƥ९���å�\n"
-"��Ʊ�����֤ˤʤ�褦�ˤǤ��ޤ����⤷���Υޥ���ǥ�����ɥ����Τ褦���̤�\n"
-"OS ��ư�����Ƥ���ʤ顢���Τۤ��������Ǥ��礦��\n"
-"\n"
-"�ּ�ư���֤��碌�ץ��ץ��������֤ȡ����󥿡��ͥåȾ�Υ�⡼�ȥ�����\n"
-"�����Ф���³���ơ���ưŪ�˻��֤��碌��Ԥ��ޤ����ФƤ����������顢�Ǵ��\n"
-"�Υ����Ф�����Ǥ���������������󤳤ε�ǽ��Ȥ��ˤϡ����󥿡��ͥå���³\n"
-"��ɬ�פˤʤ�ޤ������ʤ��Υޥ����˥����ॵ���Ф򥤥󥹥ȡ��뤷�ơ�\n"
-"���ץ����ˤ�äƤϥ�������ͥåȥ�����¾�Υޥ��󤬡��������³����\n"
-"���֤��碌�򤹤뤳�Ȥ�Ǥ��ޤ���"
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (X ������ɥ������ƥ�) �ϡ�GNU/Linux ����ե��å����󥿡��ե�������\n"
-"����ǡ�Mandrake Linux �ˤĤ��Ƥ��륰��ե��å��Ķ� (KDE, Gnome, \n"
-"AfterStep, WindowMaker...)�Ϥ��٤Ƥ���˰�¸���ޤ��������Ǥϡ�DrakX\n"
-"�ϼ�ưŪ�� X �����ꤷ�褦�Ȥ��ޤ���\n"
-"\n"
-"���줬���Ԥ��뤳�ȤϤޤ�����ޤ��󡣼��Ԥ����ǽ���Ȥ��ƹͤ������\n"
-"�ϡ��ϡ��ɥ��������ȤƤ�Ť��ʤ����������ˤȤ������ȤǤ������������\n"
-"��˥��˲�ǽ�ʺ���β����٤Ǽ�ưŪ��X����ư���ޤ��������ƥ�����ɥ�\n"
-"���ФƤ��ơ����β��̤������뤫�ȳ�ǧ���ޤ���\n"
-"\n"
-"�֥������ѡ��ȡץ��󥹥ȡ���ξ��ˤϡ�X ���ꥦ�������ɤ�����ޤ���\n"
-"���Υ��������ɤˤĤ��ƾܤ����ϡ��ޥ˥奢��򸫤Ƥ���������\n"
-"\n"
-"��å������������ơ�����ˡ֤Ϥ��פ��������顢DrakX �ϼ��˿ʤߤޤ���\n"
-"��å������������ʤ���С����꤬�ޤ����äƤ���Ȥ������ȤʤΤǡ�����\n"
-"�ƥ��Ȥ�10�äǽ�λ���ơ���Ȥβ��̤����ޤ���"
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"��ȯ�ܤ��ȡ����ޤ���̤ζ�礬�褯�ʤ����⤷��ޤ���\n"
-"���̤�����������Ȥ��������ˤ���Ƥ���Ȥ��ˡ������� X ��������\n"
-"��ư�������ˤǤ⡢DrakX �����꤬Ŭ�ڤ��ɤ��������ơ���ǽ�ʳƼ��\n"
-"�⡼�ɤ�ɽ�����ơ������ʤΤ����٤ȸ����櫓�Ǥ���\n"
-"\n"
-"�Ǹ�μ��ʤȤ��ơ����Ѥ�餺X��ư���ʤ���С֥���ե��å��������ɤ��ѹ���\n"
-"�����ӡְ����ˤʤ������ɡפ����򡢤ɤΥ����Ф�Ȥ��������줿�� FBDev��\n"
-"���Ӥޤ�������ϥե����륻���դ������ǡ��Ƕ�Τ��٤ƤΥ���ե��å���\n"
-"�����ɤǻȤ��ޤ������줫��ֺƥƥ��ȡפ�����dz�ǧ���ޤ��礦��"
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"�Ǹ�ˡ���ư���˥���ե��å��桼�����󥿡��ե��������ۤ�����ʹ����ޤ���\n"
-"������Ƥ��ʤ��Ȥ��Ǥ⡢���μ���ϽФޤ����ޥ���򥵡��ФȤ��ƻȤ���\n"
-"�ǥ����ץ쥤�����꤬���ޤ������ʤ��ä����ˤϡ������ǤϤ������֤�������\n"
-"�������ޤ��礦��"
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CDROM �ˤϥ쥹���塼�⡼�ɤ��Ȥ߹���Ǥ���ޤ��������\n"
-"�Ȥ��ˤ� CDROM ���鵯ư���ơ���ư���� >>F1<< �����򲡤����ץ���ץȤ�\n"
-">>rescue<< �ȥ����פ��뤳�ȤǤ����Ǥ⡢CDROM���鵯ư�Ǥ��ʤ����ˤϡ�\n"
-"2����ξ��ˤ�������äƤ���ɬ�פ�����Ǥ��礦:\n"
-"\n"
-" * �֡��ȥ������Υ��󥹥ȡ�����ˤϡ�drakX �ϼ�ǥ������Υ֡��ȥ�����\n"
-" (MBR) ��񤭴����ޤ����̤Υ֡��ȥޥ͡������ȤäƤ��ʤ��¤�ˡ�����\n"
-"���뤳�Ȥǡ�������ɥ����� GNU/Linux �Τɤä��Ǥⵯư�Ǥ���褦�ˤʤ�\n"
-"�ޤ��ʥ����ƥ�˥�����ɥ��������äƤ�����ˡ�\n"
-"��������ɥ����򥤥󥹥ȡ��뤷�ʤ����ȡ��ޥ��������եȤΥ��󥹥ȡ���\n"
-"�ץ��������֡��ȥ�������񤭴�����Τǡ�GNU/Linux����ư�Ǥ��ޤ���!\n"
-"\n"
-" * �⤷�������꤬�����ơ��ϡ��ɥǥ��������� GNU/Linux ��ư�Ǥ��ʤ�\n"
-"���ˤϡ�GNU/Linux ��ư����ˤϤ��Υե��åԡ������꤬����ޤ���\n"
-"���Υǥ������ˤϡ����ŤȤ�����äȤ��������ץߥ����ѥ���ɤδְ㤤\n"
-"�ʤɤˤ�륯��å��夫�饷���ƥ�����������Τ˻Ȥ��롢�Ƽ�Υġ���\n"
-"�����äƤ��ޤ���\n"
-"\n"
-"���Υ��ƥåפ򥯥�å�����ȡ��ե��åԡ��ǥ�������ɥ饤�֤��������\n"
-"�׵ᤵ��ޤ�����������ե��åԡ��ǥ������ϡ����������פʥǡ�������\n"
-"���äƤ��ʤ���Τˤ��ޤ��礦���ե����ޥåȤ���ɬ�פϤ���ޤ���\n"
-"DrakX�������ˤ����񤭴����ޤ���"
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"���Ƥ���ɤϡ��ϡ��ɥǥ��������Mandrake Linux OS ��ɤ��˥��󥹥ȡ���\n"
-"���뤫���֤��Ȥˤʤ�ޤ����⤷�ϡ��ɥǥ����������������Ǥ��̤� OS ��\n"
-"���ڡ����������ȤäƤ��ޤäƤ����顢�ѡ��ƥ��������ڤäƤ��ɬ�פ�\n"
-"����ޤ�������ǡ��ѡ��ƥ��������ڤ�Ȥ����Τϡ��ϡ��ɥǥ�����������\n"
-"Ū��ʬ�䤷�Ƥ�뤳�ȤǤ���������äơ������� Mandrake Linux �����ƥ��\n"
-"���󥹥ȡ��뤹����ڤ�򤳤��館�Ƥ��櫓�Ǥ���\n"
-"\n"
-"�ѡ��ƥ��������ڤ�Τϡ����ʤ��������꤬�����ޤ��󡣤�����\n"
-"�鿴�ԤˤϤ��ä��ʤ���������줹���ȤǤϤ���ޤ���\n"
-"���Υ��������ɤϥץ��������ñ�ˤ��뤿��Τ�ΤǤ����Ϥ�����ˡ�\n"
-"�ޥ˥奢��򤸤ä����ɤ�Ǥ���������\n"
-"\n"
-"�������ѡ��ȥ⡼�ɤǥ��󥹥ȡ���򤷤Ƥ����ʤ顢Mandrake Linux \n"
-"�Υѡ��ƥ������ġ��� DiskDrake ����ư���ޤ��������Ȥ��ȡ��ѡ�\n"
-"�ƥ������κ٤������꤬�Ǥ��ޤ����ޥ˥奢��� DiskDrake �ξϤ� \n"
-"���Ȥ��Ƥ����������Ȥ�����Ʊ���Ǥ������󥹥ȡ��륤�󥿡��ե����� \n"
-"����ϡ��������������륦�������ɤ��Ȥ��ޤ�������ˤϡ����󥿡� \n"
-"�ե������ǡ֥��������ɡץܥ���򥯥�å����ޤ��礦��\n"
-"\n"
-"�⤷�ѡ��ƥ�����󤬤��Ǥ��ڤäƤ���ʤ�����˥��󥹥ȡ��뤷���� \n"
-"�Ȥ�����Ȥ����̤Υѡ��ƥ������ġ����Ȥä��Ȥ��ˡ����Ȥ�ñ�� \n"
-"Linux �����ƥ�򥤥󥹥ȡ��뤹��Ф��������Ǥ���\n"
-"\n"
-"�ѡ��ƥ�����󤬤ޤ��������Ƥ��ʤ���С����������ޤ��礦��\n"
-"����ˤϡ�����Ѱդ������������ɤ�ȤäƤ����������ϡ��ɥǥ�����������\n"
-"�˱����ơ������Ĥ������������ޤ�:\n"
-"\n"
-" * �������ڡ�����Ȥ�������϶����ǥ�������ưŪ�˥ѡ��ƥ�����󤷤� \n"
-"����ޤ�������ʾ岿�⤹��ɬ�פϤ���ޤ���\n"
-"\n"
-"* ��¸�ѡ��ƥ�������Ȥ�: ���������ɤ���¸��Linux �ѡ��ƥ������� \n"
-"�ǥ�������Ǹ��Ĥ��ޤ������⤷�����Ȥ��ʤ顢���Υ��ץ��������Ӥޤ���\n"
-"\n"
-" * ������ɥ����ζ�����ʬ��Ȥ�: �ϡ��ɥǥ������˥�����ɥ�����\n"
-"  ���󥹥ȡ��뤵��Ƥ��ơ��ǥ��������Τ�ȤäƤ���ʤ顢\n"
-"  Linux �Υǡ����Ѥ˶�����Ĥ���ɬ�פ�����ޤ�������ˤϡ�\n"
-"  ������ɥ�����ä��Ƥ��ޤäƤ⤤���Ǥ����ʾ�Ρ����ǥ������õ��\n"
-"  ���֥������ѡ��ȥ⡼�ɡפ򸫤Ƥ��������ˡ�������ɥ�����\n"
-"  �ѡ��ƥ�������ꥵ����������ˡ�⤢��ޤ����ꥵ�����ξ�硢\n"
-"  �ǡ����Ϥ��٤ƻĤ�ޤ��� Mandrake Linux �ȥ�����ɥ�����Ʊ��\n"
-"  �ޥ���ǻȤ�������Ф��줬������Ǥ���\n"
-"\n"
-"  ������ˡ���������ˡ��������ȥ�����ɥ����Υѡ��ƥ�������\n"
-"  ����꾮�����ʤ�ΤϾ��Τ��Ƥ����Ƥ���������\n"
-"  �Ĥޤꡢ������ɥ����Τۤ��Ǥϡ��ǡ�������¸�����꿷�������եȤ�\n"
-"  ���󥹥ȡ��뤹��Ȥ��ˡ��Ȥ�����������ʤ��ʤ�櫓�Ǥ���\n"
-"\n"
-" * �ǥ��������Τ�õ�: �ϡ��ɥɥ饤�־�����ǡ�����ѡ��ƥ�������\n"
-"  �õ�ơ������� Mandrake Linux �Ǿ�񤭤�������С����Υ��ץ�����\n"
-"  ���Ӥޤ��礦�����ξ�硢���Ťˤ��Ƥ������������ä����ǧ�ܥ����\n"
-"  �������顢�⤦���ʤ����Ϥ����ޤ���\n"
-"\n"
-" !! ���Υ��ץ��������֤ȡ��ǥ�������Υǡ����Ϥ��٤ƾä��ޤ��� !!\n"
-"\n"
-" * ������ɥ�������: �ɥ饤�־�Τ�Τ��٤Ƥ�õ�ơ����ξ��� \n"
-"����ѡ��ƥ���������ľ���ޤ����ǥ�������Υǡ����������ä��ޤ���\n"
-"\n"
-"   !! ���Υ��ץ��������֤ȡ��ǥ�������Υǡ����������ä��ޤ��� !!\n"
-"\n"
-" * �������ѡ��ȥ⡼��: �ϡ��ɥǥ��������ư�ǥѡ��ƥ�����󤷤�����С�\n"
-"  ���Υ��ץ��������Ӥޤ��礦���Ǥ⡢���դ��Ƥ������������Ϥʤ����ˡ�\n"
-"  ����������Ǥ⤢��ޤ����ǥ�����������ǡ����򤢤ä���ä��Ƥ��ޤ��ޤ���\n"
-"  �褯�褯�狼�ä������Ǥʤ���С���������Фʤ��Ǥ���������"
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"�ϡ������Ǥ��ޤ��������󥹥ȡ��뤬��λ���ơ�GNU/Linux�����ƥब�Ȥ���\n"
-"�褦�ˤʤ�ޤ����衣OK �򥯥�å�����ȥ����ƥब�Ƶ�ư���ޤ����⤷\n"
-"�ǥ奢��֡��Ȥˤ��Ƥ����顢������ɥ����Ǥ�Linux�Ǥ����٤ޤ���\n"
-"\n"
-"�ֹ��١ץܥ���ʥ������ѡ��ȥ⡼�ɤΤߡˤ򲡤��ȡ���ĥܥ��󤬽ФƤ��ޤ�:\n"
-"\n"
-" * ��ư���󥹥ȡ���ե��åԡ�����: �����Ф����ʤ��Ƥ⼫ưŪ�ˡ�\n"
-"���ޤ�ä��ΤȤۤȤ��Ʊ�����󥹥ȡ���򤷤Ƥ����ե��åԡ��������\n"
-"\n"
-"   ���Υܥ���򥯥�å�����ȡ���ĤΥ��ץ�������٤ޤ�:\n"
-"\n"
-"    * �Ƹ�: ����ϼ�˼�ư���󥹥ȡ���Ǥ����ѡ��ƥ�������ڤ������\n"
-"���÷��ǹԤ��ޤ���\n"
-"\n"
-"    * ��ư��: �����˼�ư�����줿���󥹥ȡ���Ǥ����ϡ��ɥǥ�������\n"
-"�����˾�񤭤���ƥǡ����������ä��ޤ���\n"
-"\n"
-"   �����褦�ʥޥ���¿���˥��󥹥ȡ��뤹��Ȥ��ˤϤȤƤ������Ǥ���\n"
-"���ҤΥ����֥����Ȥǡ�Auto install �ι�򸫤Ƥ���������\n"
-"\n"
-" * �ѥå������������¸(*): ����������ѥå������Υꥹ�Ȥ���¸��\n"
-"�������Ƥ����ȡ��̤Υ��󥹥ȡ�����ˤ�ɥ饤�֤ˤ��Υե��åԡ���\n"
-"����ơ��إ�ײ��� F1 �� ��linux defcfg=\"floppy\"�פǤ��ߤޤ���\n"
-"\n"
-"(*) FAT �����Υե��åԡ���ɬ�ס�GNU/Linux �Ǻ��ˤϡ�mformat a:��\n"
-"�ȥ����פ��ޤ���)"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"�������Ĥ��ä��ѡ��ƥ������ϡ����٤ƥե����ޥåȤ��ʤ��ȻȤ��ޤ���\n"
-"�ʥե����ޥåȤȤϥե����륷���ƥ��Ĥ���Ȥ������ȤǤ��ˡ�\n"
-"\n"
-"�����ǡ���¸�Υѡ��ƥ�������ե����ޥåȤ��ơ���ȤΥǡ�����õ�\n"
-"���Ƥ������Ȥ�Ǥ��ޤ������ξ��ˤϡ��ե����ޥåȤ������ѡ��ƥ������\n"
-"������Ǥ����Ƥ���������\n"
-"\n"
-"�̤˴�¸�Υѡ��ƥ�������̵���˥ե����ޥåȤ���ɬ�פϤ���ޤ���\n"
-"OS �����ä��ѡ��ƥ������ʤ��Ȥ��С�/�ס�/usr�ס�/var�פʤɡˤ�\n"
-"�ե����ޥåȤ�ɬ�פǤ������ȤäƤ��������ǡ��������ä�\n"
-"�ѡ��ƥ��������̾�ϡ�/home�סˤϤ��ΤޤޤǤ������礦�֤Ǥ���\n"
-"\n"
-"�ѡ��ƥ���������Ӥˤ����դ��ޤ��礦���ե����ޥåȤ����顢�ǡ�����\n"
-"�����õ��ơ����٤Ȳ����Ǥ��ޤ���\n"
-"\n"
-"�ѡ��ƥ������Υե����ޥåȤ򳫻Ϥ���ˤϡ�OK�פ򥯥�å����ޤ���\n"
-"\n"
-"¾�Υѡ��ƥ�����������Ǥ������Mandrake Linux OS �������ʤ顢\n"
-"�֥���󥻥�פ򥯥�å����Ƥ���������\n"
-"���ɥ֥��å��Υ����å��򤷤�����Сֹ��٤�����פ򥯥�å����ޤ���"
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"������ Mandrake Linux os �򥤥󥹥ȡ�����Ǥ������Ф餯���֤�\n"
-"������ޤ��ʥ��󥹥ȡ��뤹�륵�����ȥ���ԥ塼����®�٤ˤ���ޤ��ˡ�\n"
-"\n"
-"���Ф餯���Ԥ���"
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Mandrake Linux �򤢤ʤ������󥹥ȡ��뤹�뺢�ˤϡ����֤󤤤��Ĥ��Υѥå�����\n"
-"����������Ƥ���Ϥ��Ǥ����Х��ե��������Ԥ�줿�ꡢ�������ƥ����꤬���\n"
-"����Ƥ��뤫�⤷��ޤ��󡣤������������β��ä���뤿�ᡢ����򥤥󥿡��ͥ�"
-"��\n"
-"�������������ɤ��뤫�ɤ���������ޤ������󥿡��ͥå���³������С֤Ϥ���\n"
-"�����ӡ������ѥå������Υ��󥹥ȡ�����󤷤ˤ���ʤ�֤������פ����Ӥ�"
-"����\n"
-"\n"
-"�֤Ϥ��פ����֤ȡ������ѥå��������֤��줿��������ɽ������ޤ���\n"
-"�Ǵ��ξ�������Ǥ�������������ȥѥå���������ĥ꡼��ɽ������ޤ���\n"
-"�������Ф줿����ǧ���ޤ��礦���֥��󥹥ȡ���פ򲡤��ȡ�����ѥå�����\n"
-"���ɤ߹��ߥ��󥹥ȡ��뤵��ޤ����֥���󥻥�פ����ǤǤ���"
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"��˿ʤ����˥饤���󥹾��򿵽Ť��ɤ�Ǥ�������������� Mandrake Linux\n"
-"���Τ򥫥С������ΤǤ�����ĤǤ�Ʊ�դǤ��ʤ���ब����С��ֵ��ݡ�\n"
-"�򲡤��Ƥ�������������ȥ��󥹥ȡ��뤬�����˽����ޤ������󥹥ȡ����\n"
-"³����ˤϡ���Ʊ�դ���ץܥ���򲡤��Ƥ���������"
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"���ơ�����ɤϤ��Υޥ���˵��륻�����ƥ����������ʳ��Ǥ�����§�Ȥ���\n"
-"�ޥ��󤬳����ˤ��餵��Ƥ����ٹ礤���⤤�ۤɡ������ƥޥ�����Υǡ����ν���\n"
-"�����⤤�ۤɡ��������ƥ�����⤯���ޤ���\n"
-"�Ǥ⡢�⤤�������ƥ��ϡ����̤˥ޥ���λȤ��䤹�������ˤ��ޤ���\n"
-"�ƿ��ˤĤ��ƾܤ����ϡ���ե���󥹥ޥ˥奢��� MSEC �ξϤ򻲾ȤΤ��ȡ�\n"
-"\n"
-"�������٤Ф������狼��ʤ���С��ǥե���ȤΤޤޤˤ��Ƥ����ޤ��礦��"
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"���Ƥ����ǡ������� Mandrake Linux �����ƥ�Υ��󥹥ȡ���ˤɤ�\n"
-"�ѡ��ƥ�������Ȥ������ꤷ�ޤ����⤷�ѡ��ƥ����������Ѥߤʤ�\n"
-"������ GNU/Linux �򥤥󥹥ȡ��뤷�����Ȥ����ä����̤Υġ����Ȥä�\n"
-"�ꤷ�����ˡ�����򤽤Τޤ޻Ȥ����Ȥ�Ǥ��ޤ�������ʳ��ϡ�\n"
-"�ѡ��ƥ�����������ɬ�פǤ���\n"
-"\n"
-"�ѡ��ƥ�������Ĥ���ˤϡ��ޤ��ϡ��ɥǥ����������Ӥޤ����⤷\n"
-"�ǽ�� IDE �ɥ饤�֤����֤ʤ��hda�ס������ܤ� IDE �ʤ��hdb�ס�\n"
-"�ǽ�� SCSI �ǥ������ʤ��sda�פȤ������˥���å��������Ӥޤ���\n"
-"\n"
-"�ϡ��ɥǥ������Υѡ��ƥ��������ڤ�ˤϡ��ʲ��Υ��ץ���󤬻Ȥ��ޤ�:\n"
-"\n"
-"   * �����õ��: ������ϡ��ɥǥ�����������ѡ��ƥ�������õ�ޤ���\n"
-"\n"
-"   * �ּ�ư������ơ�: �ϡ��ɥǥ������ζ�����ʬ�ˡ���ưŪ�� Ext2 ��\n"
-"     ����åץѡ��ƥ�������Ĥ���ޤ���\n"
-"\n"
-"   * �֤�äȡ�: ������ɲõ�ǽ�˥��������Ǥ���褦�ˤʤ�ޤ�:\n"
-"\n"
-"   * �֥ѡ��ƥ������ơ��֥����¸��: �ѡ��ƥ������ơ��֥��ե��åԡ�\n"
-"     ����¸���ޤ��������ѡ��ƥ������ơ��֥뽤����ɬ�פʤȤ��������Ǥ���\n"
-"     ����������äƤ����褦�����ᤷ�ޤ���\n"
-"\n"
-"   * �֥ѡ��ƥ������ơ��֥��������: ���˥ե��åԡ�����¸�����ѡ��ƥ�����"
-"��\n"
-"     �ơ��֥���������ޤ���\n"
-"\n"
-"   * �֥ѡ��ƥ������ơ��֥뽤����: �ѡ��ƥ������ơ��֥뤬�˲�����\n"
-"     ���顢���Υ��ץ����Ǥ���������Ƥߤ뤳�Ȥ��Ǥ��ޤ���\n"
-"     ���Ť˻Ȥäơ����줬��ǽ�Ǥʤ����ȤϾ��Τ��Ƥ����Ƥ���������\n"
-"\n"
-"    * �֥ѡ��ƥ������ơ��֥���ɹ���: �ѹ��򤹤٤ƼΤƤơ��ǽ��\n"
-"      �ѡ��ƥ������ơ��֥���᤹\n"
-"\n"
-"    * �֥�ࡼ�Х֥��ǥ����μ�ư�ޥ���ȡ�: ���Υ��ץ����Υ����å���\n"
-"      �Ϥ����ȡ��桼���ϼ�ư�ǥ�ࡼ�Х֥��ǥ��������Ȥ��Хե��åԡ��� \n"
-"      CD-ROM���ư�ǥޥ����/����ޥ���Ȥ���ɬ�פ�����ޤ���\n"
-"\n"
-" * �֥��������ɡ�: �ϡ��ɥǥ������Υѡ��ƥ�����󥦥������ɤ�Ȥ��Ȥ���\n"
-"���ץ����Ǥ����ѡ��ƥ������ˤĤ��Ƥ��μ����ʤ��ͤϡ����줬������Ǥ���\n"
-"\n"
-" * �ּ��ä���: ���Υ��ץ�����Ȥä��ѹ�����ä��ޤ���\n"
-"\n"
-" * ���̾�/�������ѡ��ȥ⡼�ɤؤ��ڤ��ؤ���: �ѡ��ƥ��������Ф����ɲä�\n"
-"���꤬�Ǥ���ä褦�ˤʤ�ʼ��ࡢ���ץ���󡢥ե����ޥ�Ȥʤɡˡ��ޤ������\n"
-"�ܤ���ɽ������롣\n"
-"\n"
-" * �ִ�λ��: �ϡ��ɥǥ������Υѡ��ƥ�������ڤ꤬����ä��顢���Υ��ץ����"
-"��\n"
-"�Ȥä��ѹ�����¸���ޤ���\n"
-"\n"
-"���ͤޤǤˡ������ܡ��ɤ���ƥ��ץ�������٤ޤ������֤Ⱦ岼�����Ȥä�\n"
-"�ѡ��ƥ����������Ӥޤ��礦��\n"
-"\n"
-"�ѡ��ƥ�������������顢�ʲ����Ȥ��ޤ�:\n"
-"\n"
-"     * Ctrl-c�������ѡ��ƥ�������Ĥ���ʶ��Υѡ��ƥ�������������Ȥ�)\n"
-"\n"
-"     * Ctrl-d���ѡ��ƥ��������\n"
-"\n"
-"     * Ctrl-m���ޥ���ȥݥ���Ȥ򥻥å�\n"
-"\n"
-"PPC �ޥ���˥��󥹥ȡ��뤷�Ƥ�����ˤϡ�yaboot �֡��ȥ������Ѥˡ�\n"
-"���� 1 MB �ξ����� HFS�֥֡��ȥ��ȥ�åסץѡ��ƥ���������ޤ��礦��\n"
-"���Υѡ��ƥ������򡢤��Ȥ��� 50 MB �Ȥ��礭��ˤ��Ƥ����ȡ�������ͽ����\n"
-"�����ͥ��ramdisk ���᡼������¸���Ƥ����ơ��۵޵�ư�˻Ȥ��������Ǥ���"
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"������ɥ����Υѡ��ƥ�����󤬤����Ĥ��ϡ��ɥǥ�������˸��Ĥ���ޤ�����\n"
-"Mandrake Linux OS �Υ��󥹥ȡ����Ѥ˥ꥵ������������Τ������\n"
-"����������\n"
-"\n"
-"�ƥѡ��ƥ������ϰʲ��ν񼰤Ǥ�: ��Linux̾�ס֥�����ɥ���̾�ס����̡�\n"
-"\n"
-"��Linux ̾�פϼ��ν񼰤Ǥ�: �֥ϡ��ɥǥ���������ס֥ɥ饤���ֹ��\n"
-"�֥ѡ��ƥ�������ֹ�סʤ��Ȥ��С�hda1��)\n"
-"\n"
-"\n"
-"�֥ϡ��ɥǥ���������פϡ�IDE �ǥ������ʤ��hd�פǡ�SCSI �ʤ��sd��\n"
-"�Ǥ���\n"
-"\n"
-"\n"
-"�֥ɥ饤���ֹ�פϡ���hd�פ��sd�פθ�ˤĤ�ʸ���Ǥ���IDE�ʤ�:\n"
-"\n"
-"   * ��a�פϥץ饤�ޥꥳ��ȥ������Υޥ����ǥ�����\n"
-"\n"
-"   * ��b�פϥץ饤�ޥꥳ��ȥ������Υ��졼�֥ǥ�����\n"
-"\n"
-"   * ��c�פϥ��������IDE����ȥ������Υޥ����ǥ�����\n"
-"\n"
-"   * ��d�פϥ��������IDE����ȥ������Υ��졼�֥ǥ�����\n"
-"\n"
-"\n"
-"SCSI �ϡ��ɥǥ������ξ�硢��a�פ�SCSI ID�ֹ�Ǿ��Υǥ�������\n"
-"��b�פϤ��μ���ID�ֹ桢�Ȥ������Ǥ�\n"
-"�֥�����ɥ���̾�פϡ�������ɥ����ǤΥɥ饤��ʸ���Ǥ��ʺǽ�Υǥ�����\n"
-"��ѡ��ƥ������ϡ�C:�ץɥ饤�֤Ǥ�)��"
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "���Ф餯���Ԥ��򡣤������Ϥ��Ф餯������ޤ��Τǡ�"
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX�Ϥ���ɤϡ��ɤ�ʼ���Υ��󥹥ȡ���򤷤������Ҥͤޤ����ǥե����\n"
-"�ʿ侩�˥��󥹥ȡ��뤫����äȥ���ȥ����뤷�������ʡ֥������ѡ��ȡס�\n"
-"�Ǥ����ޤ��������󥹥ȡ��뤫��¸��Mandrake Linux�򹹿�����Τ������٤ޤ���\n"
-"\n"
-" * �֥��󥹥ȡ���� �Ť������ƥ�����˾õ�ޤ����¤ϡ����ޤΥޥ����\n"
-"����ˤ�äƤϡ��Ť���Linux�Τߤʤ餺¾�Ρ˥ѡ��ƥ��������ѹ����ʤ��ޤ�\n"
-"��¸�Ǥ��ޤ���\n"
-"\n"
-" * �ֹ����� ���Υ��󥹥ȡ��륯�饹�Ǥϡ����ޤ� Mandrake Linux �����ƥ�\n"
-"��Υѥå������򹹿���������Ǥ����ϡ��ɥɥ饤�֤Υѡ��ƥ�������Ƽ�\n"
-"�桼���ˤ������ϻĤ�ޤ�������ʳ����̾磻�󥹥ȡ���Ȥޤä���Ʊ��\n"
-"����褬�����ޤ���\n"
-"\n"
-" * �֥ѥå������Τ߹����� ���ο��������饹�ϡ���¸ Mandrake Linux �򹹿�\n"
-"���Ĥġ����ޤޤǤΥ����ƥ�������Ѥ��ޤ��󡣥����ȤΥ��󥹥ȡ�����Ф���\n"
-"�������ѥå��������ɲä���Ȥ��⤳���Ǥ���\n"
-"\n"
-"Mandrake Linux8.1�ʹߤ򹹿��������Τʤ�ֹ����פǤ������礦�֤Ǥ��礦��\n"
-"\n"
-"GNU/Linux �ؤν����٤˱����ơ��ʲ��Υ��󥹥ȡ��롦������٥뤬\n"
-"���٤ޤ�:\n"
-"\n"
-"* �侩: GNU/Linux  �Υ��󥹥ȡ��뤬���Ƥʤ餳�������Ǥ���������\n"
-"���뤵������⤢�ޤ�ʤ����ȤƤ��ñ�˥��󥹥ȡ���Ǥ��ޤ���\n"
-"\n"
-"* �������ѡ���: GNU/Linux �˾ܤ����ͤϡ����Υ��󥹥ȡ��륯�饹��\n"
-"���٤ޤ��������ƥ������ಽ�������󥹥ȡ��뤬�Ǥ��ޤ���\n"
-"GNU/Linux�ˤĤ��Ƥ�ۤɾܤ����ʤ��ȡ��ʤ��ʤ��������ʤ����䤬\n"
-"����ޤ����狼�ä��Ͱʳ��ϡ����Υ��饹�����Фʤ����ȡ�"
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"�դĤ���drakX�Ϥ��ʤ��Ѥ������������ܡ��ɤ�ưŪ�����Ӥޤ��ʸ��������\n"
-"���Ȥ�Ƚ�Ǥ��ޤ��ˡ������餳�Υ��ƥåפϤդĤ��ϽФƤ��ޤ��󡣤�����ʬ\n"
-"�θ���ˤ��ä����б����������ܡ��ɤ�ȤäƤ��ʤ����⤷��ޤ��󡣤��Ȥ���\n"
-"�Ѹ���ä��������ͤʤ顢�����ܡ��ɤϥ��������Τۤ��������Ȼפ����⤷���\n"
-"���󡣤��뤤�ϱѸ�Ĥ����Ǥ⥱�٥å��߽��ʤ顢���������ˤʤ�Ǥ��礦��\n"
-"������ξ��Ǥ⡢���Υ��󥹥ȡ����ʳ�����äơ���������Ŭ�ڤʥ����ܡ���\n"
-"������Ǥ���������\n"
-"\n"
-"�֤�äȡץܥ���򲡤��ȡ����ݡ��Ȥ���륭���ܡ��ɤ����٤�ɽ������ޤ���"
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"���󥹥ȡ���ȥ����ƥ����ѤǻȤ����������Ǥ���������\n"
-"\n"
-"�ֹ��٤�����ץܥ���ǡ��ۤ��θ�������٤ޤ�������ϥޥ�������äơ����\n"
-"ɬ�פ˱����ƻȤ��ޤ������Ȥ��Ф��Υޥ���򥹥ڥ���οͤˤ�ȤäƤ�餦��\n"
-"�顢�ĥ꡼ɽ���μ��׸���ˤϱѸ������ǡ��ֹ��٤�����פǥ��ڥ����/��\n"
-"�ڥ�����б�����ܥå����˥����å�������ޤ���\n"
-"\n"
-"�����ʣ�����٤ޤ����ɲäθ���ʥ�������ˤ�����ǡ�OK�򲡤��Ƴ�ǧ�����顢\n"
-"��ưŪ�˼��Υ��ƥåפ˿ʤߤޤ���"
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"�ǥե���Ȥ��ȡ�DrakX �ϣ��ܥ���ޥ��������ꤷ�ơ�����ܥ���򥨥ߥ�졼��\n"
-"��������ˤʤäƤ��ޤ���DrakX �ϡ����줬PS/2�ޥ�����USB�ޥ�������ưȽ��\n"
-"���ޤ���\n"
-"\n"
-"�̼�Υޥ�������ꤹ��ˤϡ����������̤Υޥ���������Ǥ���������\n"
-"\n"
-"�ǥե���Ȱʳ��Υޥ�����������顢�ޥ����Υƥ��Ȳ��̤��ФƤ��ޤ���\n"
-"�ܥ����ۥ������ȤäƤߤơ���������Ǥ��������ǧ���ޤ��礦�����ޤ�\n"
-"ư���ʤ���С����ڡ������֥꥿����פ򲡤��ƥ���󥻥뤷�ơ����Ӥʤ���\n"
-"�ޤ���"
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"�������ݡ��Ȥ�����Ǥ������������Ȥ��С�MS ������ɥ����Ǥ�\n"
-"COM1�ݡ��Ȥϡ�GNU/Linux�Ǥ� ttyS0 �Ȥ���̾���ˤʤ�ޤ���"
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"������GNU/Linux�����ƥ�Υ������ƥ���ǰ��֤Υ���ˤ�äƤ��ޤ�����\n"
-"root �ѥ���ɤ�����Ǥ���root �ϥ����ƥ�����Ԥǡ������ƥ�򹹿���\n"
-"���ꡢ�桼�����ɲä����ꡢ�����ƥ����Τ�������Ѥ�����Ǥ���ͣ���¸��\n"
-"�Ǥ���root �Ϥ��Υ����ƥ�Ǥ���ǽ�ʤΤǤ���\n"
-"�����餳����¾�ͤ˿�¬����ʤ��ѥ�������Ӥ�ɬ�פǤ�����ñ��������\n"
-"drakX ���ٹ𤷤ޤ��������Ǽ����褦�ˡ��ѥ���ɤ����Ϥ��ʤ����Ȥϲ�ǽ\n"
-"�Ǥ������Ǥ����ꤹ�뤳�Ȥ򶯤������ᤷ�ޤ����������٤���ͳ����ġ�\n"
-"GNU/Linux ��ư��������Ȥ��äơ��ۤ��Υ��ڥ졼�ƥ��󥰥����ƥब\n"
-"�����äƤ�̵���Ȼפä��㤤���ʤ����Ȥ������ȤǤ���root�ʤ餢����\n"
-"���¤����ˤ��ơ��ѡ��ƥ�����󤽤Τ�Τ򥢥��������ơ����ǥ�������\n"
-"�ǡ����򤦤ä��������Ƥ��ޤ��ޤ��� �����顢root�ˤʤ�ΤϤऺ������\n"
-"���Ƥ����Τ�����Ǥ���\n"
-"\n"
-"�ѥ���ɤϡ�����ե��٥åȤȿ����򺮤�����Τǡ�����Ǥ�8ʸ����\n"
-"ɬ�פǤ����褷�ƽ�α�᤿�ꤷ�ʤ��Ǥ���������\n"
-"\n"
-"�ѥ���ɤϡ�Ĺ���������䤳���������ꤷ�Ƥ⤤���ޤ��󡣳ڤ˳Ф�\n"
-"�Ƥ������Τˤ��ޤ��礦��\n"
-"\n"
-"�ѥ���ɤ�������Ϥ��ޤ������ΤȤ��ˤޤ������򤹤�ȡ��ޤ����ä�\n"
-"��Τ���Ͽ����Ƥ��ޤ��Τǡ����ä����Ȥˤʤ�ޤ���\n"
-"\n"
-"��������ͥåȥ��������ˤ�äƤϡ�NIS ��Ȥ����⤷��ޤ���\n"
-"�狼��ʤ���Х����ƥ�����Ԥˤ����Ƥ���������NIS��Ȥ����ˤ�\n"
-"��NIS��Ȥ��ץ��ץ��������Ӥޤ�����OK�פ򲡤����顢ɬ�פʾ���\n"
-"�����Ϥ��ޤ���"
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO �� GRUB �� GNU/Linux �ε�ư�˻Ȥ���֡��ȥ������Ǥ��������ʳ���\n"
-"�դĤ��������˼�ư������Ƥ��ޤ���DrakX�ϥǥ������Υ֡��ȥ�������ʬ�Ϥ���\n"
-"���η�̤˱������б�����褦�ˤ��ޤ�:\n"
-"\n"
-" * �⤷������ɥ����Υ֡��ȥ�����������С������ GRUB/LILO �֡���\n"
-"�������˽񤭴�����졢GNU/Linux �� Windows��ξ������ư��ǽ�ˤʤ�;\n"
-"\n"
-" * �⤷ GRUB �� LILO �֡��ȥ����������Ĥ���С��ǿ��Ǥ˹���;\n"
-"\n"
-"�狼��ʤ���С�drakX �ϳƼ索�ץ�����󤲤�������������ɽ�����ޤ���\n"
-"\n"
-" * �ֻȤ��֡��ȥ�������: ������3�Ĥ���ޤ�:\n"
-"\n"
-"    * ��LILO������ե��å���˥塼�Ĥ���: ����ե��å���˥塼�Ĥ��� LILO ��"
-"�褱��Ф����\n"
-"\n"
-"    * ��Grub��: GRUB (�ƥ����ȥ�˥塼)�ξ�硣\n"
-"\n"
-"    * ��LILO �ƥ����ȥ�˥塼��: �ƥ����ȥ�˥塼�Ĥ� LILO �ξ�硣\n"
-"\n"
-" * �֥֡��ȥǥХ�����: �ۤȤ�ɤϡ��ǥե���� (/dev/hda) �ΤޤޤǤ���\n"
-"���ˤ�äƤϥ֡��ȥ������������ܤΥϡ��ɥǥ����� (/dev/hdb)�䡢\n"
-"�ե��åԡ��ǥ��������֤��ޤ� (/dev/fd0)��\n"
-"\n"
-" * �֥ǥե���ȥ��᡼����ư���Ԥ����֡�: ����ԥ塼����Ƶ�ư�����Ȥ���\n"
-"�֡��ȥ������Υǥե���Ȱʳ��Υ�˥塼�����֤���λ��֤���ꤷ�ޤ���\n"
-"\n"
-"!! �֡��ȥ������򥤥󥹥ȡ��뤷�ʤ��ȡʤ����ǡ֥���󥻥�פ������\n"
-"���ˡ��ۤ���Mandrake Linux��ư������ˡ����ݤ���Τ�˺��ʤ���\n"
-"����������\n"
-"�ޤ��������ǤΥ��ץ������Ѥ���Τϡ����ΰ�̣��ʬ���äƤ���ͤ�����\n"
-"���Ƥ������� !!\n"
-"\n"
-"���Υ����������ǡֹ��٤�����ץܥ���򲡤��ȡ����٤ʥ桼�����Ѥ�\n"
-"�Ƽ�ܺ٥��ץ���󤬽ФƤ��ޤ���\n"
-"\n"
-"���ѥ֡��ȥ������Υѥ�᡼�������ꤷ���顢����ɤϵ�ư�������٤�\n"
-"�֡��ȥ��ץ����ΰ�����������ޤ���\n"
-"\n"
-"�̤Υ��ڥ졼�ƥ��󥰥����ƥब�����ƥ��ˤ���С���ưŪ�˵�ư\n"
-"��˥塼���ɲä���ޤ�����¸�Υ��ץ����κ٤��������Ǥ��ޤ���\n"
-"��¸����ȥ����֥륯��å�����ȡ��ѥ�᡼�����Ѥ���������\n"
-"����Ǥ��ޤ����ִ�λ�פ򲡤��С����󥹥ȡ���μ��Υ��ƥåפؿʤ�\n"
-"�ޤ���"
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) �� Grub �ϥ֡��ȥ������Ǥ�������ԥ塼�����GNU/Linux\n"
-"�ʤɳƼ�OS��ư�Ǥ��ޤ���\n"
-"���̤ϡ�������OS�ϼ�ưŪ�ˤ�����ȸ��Ф���ƥ��󥹥ȡ��뤵��ޤ���\n"
-"���줬����ʤ顢�����Ǽ�ư�ǥ���ȥ���ɲä��ޤ��礦���ѥ�᡼����\n"
-"�ޤ������ʤ��褦���դ��Ƥ���������\n"
-"\n"
-"¾��OS�ˤ�¾�οͤ����������Ǥ��ʤ��褦�ˤ��������Ȥ⤢��ޤ�������\n"
-"���ˤϤ���OS�Υ���ȥ�������Ƥ����ޤ��礦�����������ξ��ϡ�\n"
-"����OS��Ȥ��Ȥ��ˤϵ�ư�ǥ��������פ�ޤ��衪"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"GNU/Linux�򤿤�������Τ�ɬ�פʾ���򡢤ɤ����֤����������ꤷ�ޤ���\n"
-"\n"
-"�褯�狼��ʤ��ʤ�֥ɥ饤�֤κǽ�Υ�����(MBR)�פ�����Ǥ���������"
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"�����Ǥϥ���ԥ塼���Ѥΰ��������ƥ�����Ӥޤ���¾��OS�Ǥϰ�Ĥ���\n"
-"�󶡤���ʤ����������ƥब�������Ǥ�3�Ĥ⤢��ޤ���\n"
-"\n"
-" * \"pdq\" - ����ϡ�print, don't queue�ʰ������ƥ��塼�Ϥ��ʤ��ˡ�\n"
-"�Ǥ����ץ�󥿤��ޥ����ľ�뤷�Ƥ��ơ���ͤޤ�ΤȤ��ˤ������ǤǤ�\n"
-"�ơ��ͥåȥ���ץ�󥿤��ʤ����ˤϤ�������Ӥޤ��礦���ͥåȥ��\n"
-"�Ϥ�����ñ�ʤ�Τ����б��Ǥ��ʤ���������˥ͥåȥ���ǻȤ����٤��ʤ�\n"
-"�ޤ���GNU/Linux�����Ƥʤ顢\"pdq\" �����Ӥޤ��礦�����󥹥ȡ�����\n"
-"��PrinterDrake��Mandrake ����ȥ����륻�󥿡���������ǡ֥������ѡ��ȡ�\n"
-"�ܥ���򲡤��С��夫��������Ѥ����ޤ���\n"
-"\n"
-" * \"CUPS\"��Common Unix Printing System�ʶ���Unix���������ƥ�ˡ�\n"
-"�ϥ�������ץ�󥿤ؤΰ����⡢�ϵ��΢¦�Υץ�󥿤ؤΰ����⸫���˽���\n"
-"���ޤ��������о��ˤ�Ȥ��뤷���Τʤ���� \"lpd\" ���������ƥ�Υ��饤\n"
-"����Ȥˤ�ʤ�Τǡ��Ť������ƥ�ȸߴ����⤢��ޤ������������ݤ�Ǥ���\n"
-"����������Ū������� \"pdq\" ��Ʊ�����餤��ñ�Ǥ�������� \"lpd\" ������\n"
-"�򥨥ߥ�졼�Ȥ��Ƥۤ�����С�\"cups-lpd\" �ǡ�����ͭ���ˤ��ޤ��礦��\n"
-"������ץ�󥿥��ץ���������Ѥ˥���ե��å��ե���ȥ���ɤ⤢��ޤ���\n"
-"\n"
-" * \"lprNG\" - ��line printer daemon New Generation�ʥ饤��ץ�󥿥ǡ����\n"
-"�˥塼�����ͥ졼�����ˡס������¾�Υ��ץ����Ȥۤ�Ʊ�����Ȥ��Ǥ��ޤ���\n"
-"IPX�ץ��ȥ���򥵥ݡ��Ȥ��Ƥ���Τ�Novell Network��Υץ�󥿤Ǥ�����Ǥ�\n"
-"�뤷�������륳�ޥ�ɤ�ľ�ܰ�����Ǥ��ޤ���Novell ��ɬ�פ��ä��ꡢ�ѥ���\n"
-"��Ȥ鷺�˥��ޥ�ɤذ������������ lprNG��Ȥ��ޤ��礦��\n"
-"����ʤ���С�CUPS �Τۤ�����ñ�����ͥåȥ����Ǥ���ǽ��ͥ��Ƥ���Τ�\n"
-"CUPS�ˤ��ޤ��礦��"
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX�ϥޥ�����IDE�ǥХ������������Ĥ��褦�Ȥ��ޤ����ޤ�PCI SCSI\n"
-"�����ץ��⤢��и��Ф��褦�Ȥ��ޤ���SCSI�����ɤߤĤ����顢Ŭ�ڤʥɥ饤��\n"
-"��ưŪ�˥��󥹥ȡ��뤷�ޤ���\n"
-"\n"
-"�ϡ��ɥ��������ФϤȤ��ɤ����Ԥ��뤳�Ȥ⤢��Τǡ�DrakX��PCI SCSI����\n"
-"�ץ��������ƥ�ˤ��뤫�ɤ�����ǧ����褦ʹ���Ƥ��ޤ����⤷¸�ߤ���ʤ�\n"
-"�֤Ϥ��פ򥯥�å�����ȡ������ץ��Υɥ饤�а�����ɽ������Τǡ���\n"
-"���������Ӥޤ��礦��SCSI ���ʤ���С֤������פ򥯥�å����ޤ���\n"
-"�狼��ʤ���С��֥ϡ��ɥ���������򸫤�פ������OK�򥯥�å�����\n"
-"�ϡ��ɥ����������򸫤뤳�Ȥ�Ǥ��ޤ���\n"
-"\n"
-"��ư�ǥ����ץ�����ꤷ�����ˤϡ�DrakX�ϥ��ץ�������򤷤������ɤ���\n"
-"���䤷�Ƥ��ޤ���DrakX�˥ϡ��ɥ�������ץ����֤����ơ����ץ������ᤵ��\n"
-"�ޤ��礦�������Ƥ�����Ǥ��ޤ�Ư���ޤ���\n"
-"\n"
-"�⤷ɬ�ץ��ץ�����DrakX����ưŪ�˼����Ǥ��ʤ���Х���ʤ顢�ɥ饤�Ф�\n"
-"��ʬ�ǥ��ץ�����Ϳ����ɬ�פ�����ޤ���\n"
-"�桼�������ɡ�3�ϡ��֥ϡ��ɥ������ˤĤ��Ƥξ�������סˤ��顢����˴ؤ��\n"
-"�����ϡ��ɤΥޥ˥奢���᡼���� Web �����ȡʥͥåȤ˥��������Ǥ���С�\n"
-"���뤤�ϡʥ����ƥ��ˤ���С�MS Windows ����ɤ���ä�ɬ�׾�������뤫\n"
-"��Ĵ�٤Ƥ���������"
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"yaboot�Ѥ��ɲå���ȥ�򤳤����ɲäǤ��ޤ���¾��OS�ξ��Ǥ⡢¾��\n"
-"�����ͥ�Ǥ⡢�۵��ѵ�ư���᡼���Ǥ��ǽ�Ǥ���\n"
-"\n"
-"�ۤ���OS�ξ�� - ����ȥ�ϡ���٥��root�ѡ��ƥ����������Ǥ���\n"
-"\n"
-"Linux �ξ�硢��ǽ�ʥ��ץ���󤬤����Ĥ�����ޤ�: \n"
-"\n"
-"  * ��٥�: ���ε�ư���ץ��������֤Ȥ��ˡ�yaboot�ץ���ץȤǥ�����\n"
-"����̾�Ρ�\n"
-"\n"
-"  * ���᡼��: ��ư���륫���ͥ��̾�Ρ����̤� vmlinux���ޤ���\n"
-"����ˤʤˤ���ĥ�Ҥ��Ĥ�����Τˤʤ�ޤ���\n"
-"\n"
-"  * ��ư: Linux���󥹥ȡ����Ѥ�root�ѡ��ƥ������ޤ��ϡ�/��\n"
-"\n"
-"  \n"
-"  * �ɲ�: Apple �Υϡ��ɥ������Ǥϡ������ͥ��ɲå��ץ����Ϥ��ʤ�ξ��\n"
-"�ӥǥ��ϡ��ɥ������ν�����˻Ȥä��ꡢ1�ܥ���ޥ����Ѥ˥����ܡ��ɤˤ��\n"
-"�ޥ����ܥ���Υ��ߥ�졼�����˻Ȥä��ꤷ�ޤ����ʲ������󤲤ޤ�:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-"  * Initrd: ���Υ��ץ����ϡ���ư�ǥХ�����ͭ���ˤʤ����˽���⥸�塼��\n"
-"�Υ����ɤ������뤤�϶۵޵�ư����ramdisk ���᡼���Υ����ɤ˻Ȥ��ޤ���\n"
-"\n"
-"  * Initrd-size: �ǥե���Ȥ� ramdisk ��������4096 �Х��ȤǤ���\n"
-"��ä��礭�� ramdisk ��Ȥ��Ȥ��ˡ����Υ��ץ�������Ѥ��ޤ���\n"
-"\n"
-"  * Read-write: �̾��root�ץѡ��ƥ��������ɤ߽Ф����Ѥǵ�ư����\n"
-"�����ƥब��Ω���夬������˥ե����륷���ƥ�Υ����å��򤷤ޤ�������\n"
-"���ץ����Ǥ���򥪡��С��饤�ɤǤ��ޤ���\n"
-"\n"
-"  * NoVideo: Apple �Υӥǥ���ϩ����ü������򵯤����褦�ʤ顢����\n"
-"���ץ���������ǡ֥ӥǥ��ʤ��ץ⡼�ɤǵ�ư�Ǥ��ޤ������ξ��ˤ�\n"
-"�ͥ��ƥ��֤Υե졼��Хåե��ǵ�ư���ޤ���\n"
-"\n"
-"  * �ǥե����: �ǥե���Ȥ� Linux ������Ȥ��Ƥ��Υ���ȥ꤬�Ȥ��\n"
-"�ޤ��������ñ�ˡ�yaboot �ץ���ץȤ� ENTER �򲡤������٤ޤ�������\n"
-"����ȥ�Ϥޤ���TAB�򲡤��Ƶ�ư����������ɽ���������Ȥ��ˤϡ�\n"
-"��*�פ��Ĥ��ƥϥ��饤�Ȥ���Ƥ��ޤ���"
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot �ϡ�NewWorld MacIntosh �ϡ��ɥ������ѤΥ֡��ȥ������Ǥ������줬\n"
-"����ȡ��ޥ�����GNU/Linux, MacOS, MacOSX ��ư�������٤ޤ���\n"
-"�դĤ����������� GNU/Linux �ʳ��� OS �ϼ�ưŪ�ˤ�����ȸ��Ф����\n"
-"���󥹥ȡ��뤵��ޤ����⤷����ʤ顢���β��̤ǡ���ʬ�ǥ���ȥ���ɲ�\n"
-"�Ǥ��ޤ����������ѥ�᡼�������֤褦���դ��Ƥ���������\n"
-"\n"
-"Yaboot �μ祪�ץ�����:\n"
-"\n"
-"  * ��ư��å�����: boot�ץ���ץ�����ɽ��������ñ�ʥ�å�����\n"
-"\n"
-"  * ��ư�ǥХ���: GNU/Linux ��ư�Ѥξ����ɤ����֤����ؼ���\n"
-"���̤ϡ����ξ����Ѥ˥֡��ȥ��ȥ�å��ѤΥѡ��ƥ�������\n"
-"���������ʳ��Ǻ�äƤ���Ϥ��Ǥ���\n"
-"\n"
-"  * �����ץ�ե����०�������Ԥ�����: LILO �Ȥ����äơ�yaboot�ˤ��Ԥ�����\n"
-"�����������Ǥ��ޤ����ǽ���Ԥ����֤���ñ�̤ǡ������Ԥ����֤δ֤ˡ�\n"
-"CD, OF boot, MacOS, Linux�Τɤ��ư���뤫���٤ޤ���\n"
-"\n"
-"  * �����ͥ뵯ư�����ॢ����: ���Υ����ॢ���Ȥ� LILO ��ư�Ԥ����֤Ȼ��Ƥ���"
-"����Linux ��������顢�����Ԥ����֤�0.1��ñ�̤Ǽ¹Ԥ���ơ����Τޤ�\n"
-"���ȥǥե���ȤΥ����ͥ뵭�Ҥ����Ф�ޤ���\n"
-"\n"
-"  - CD ��ư��ͭ���ˤ��ޤ���?: ���Υ��ץ���������å�����ȡ��ǽ�ε�ư�ץ�"
-"��ץȤǡ�C�פ������CD���鵯ư�Ǥ���褦�ˤʤ�ޤ���\n"
-"\n"
-"  * OF ��ư��ͭ���ˤ��ޤ���?: ���Υ��ץ���������å�����ȡ��ǽ�ε�ư�ץ�"
-"��ץȤǡ�N�פ�����ǥ����ץ�ե����०�������鵯ư�Ǥ��ޤ���\n"
-"\n"
-"  * �ǥե���� OS: �����ץ�ե����०�������Ԥ����֤��᤮���Ȥ����ɤ�\n"
-"OS����ư���뤫����ꤷ�ޤ���"
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"���ʤ��Υޥ���˴ؤ���Ƽ�Υѥ�᡼���򼨤��ޤ����ϡ��ɥ������ˤ�\n"
-"���ޤ������ʲ��Τ褦�ʹ��ܤ��ФƤ���Ϥ��Ǥ�:\n"
-"\n"
-" * �֥ޥ�����: �ޥ��������ߤΥޥ�������򸫤ơ�ɬ�פʤ�ܥ���򥯥�å�\n"
-"�����ѹ����ޤ���\n"
-"\n"
-" * �֥����ܡ��ɡס������ܡ��ɡ����ޤΥ����ܡ��ɤγ�������򸫤ơ�ɬ�פʤ�\n"
-"�ܥ���򥯥�å������ѹ����ޤ���\n"
-"\n"
-" * �ֻ����ӡ�: �����ӡ�DrakX �ϥǥե���Ȥǡ����ʤ������������˱�����\n"
-"�����Ӥ���ꤷ�ޤ����Ǥ⤳���Ǥ⥭���ܡ��ɤ������Ʊ���ǡ�����Ȥ�\n"
-"��������ˤ���Ȥ��ˤϡ������ӥܥ���򲡤��ơ���ʬ�λ����Ӥˤ��碌��\n"
-"����ˤǤ��ޤ���\n"
-"\n"
-" * �֥ץ�󥿡�: �֥ץ�󥿤ʤ��ץܥ���򲡤��ȡ��ץ�����ꥦ��������\n"
-"�������ޤ���\n"
-"\n"
-" * �֥�����ɥ����ɡ�: ������ɥ����ɤ����Ф��줿�餳����ɽ������ޤ���\n"
-"���󥹥ȡ�����ˤ��ѹ��Ǥ��ޤ���\n"
-"\n"
-" * ��TV �����ɡ�: TV �����ɤ����Ф��줿�餳����ɽ������ޤ���\n"
-"���󥹥ȡ�����ˤ��ѹ��Ǥ��ޤ���\n"
-"\n"
-" * ��ISDN �����ɡ�: ISDN �����ɤ����Ф��줿�餳����ɽ������ޤ���\n"
-"�ܥ���򥯥�å�����ȴ�Ϣ�ѥ�᡼�����Ѥ����ޤ���"
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"������ Mandrake Linux �ѡ��ƥ������Υ��󥹥ȡ����Ѥ˾õ����\n"
-"�ϡ��ɥǥ�����������Ǥ������������Υϡ��ɥǥ�������Υǡ���������\n"
-"�ä��Ʋ����Ǥ��ޤ������դ��Ƥ���������"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"���Υϡ��ɥǥ�������Τ��٤ƤΥǡ�����ѡ��ƥ�������\n"
-"�õ��ʤ��OK�פ򥯥�å����Ƥ�����������OK�פ򥯥�å������顢\n"
-"���Υϡ��ɥǥ�������˺�����ǡ�����ѡ��ƥ������ϡ�������ɥ���\n"
-"�Τ�Τ�ޤᡢ���٤ƾõ��Ʋ����Բ�ǽ�ˤʤ�ޤ���\n"
-"\n"
-"������������ơ��ϡ��ɥǥ�������Υǡ�����ѡ��ƥ�������\n"
-"���Τޤޤˤ��Ƥ����ˤϡ֥���󥻥�פ򥯥�å����ޤ��礦��"
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "%s ��ե����ޥåȤ��Ƥ�������"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"�ʲ��Υ����Ф����Ӥޤ�����: %s\n"
-"\n"
-"\n"
-"�����Υ����Фϥǥե���Ȥ�ͭ���ˤʤ�ޤ����ä˥������ƥ����\n"
-"����Ϥʤ��褦�Ǥ�����������ȯ�����뤳�Ȥ⤢��ޤ������ξ��ˤ�\n"
-"�����˥��åץ��졼�ɤ��Ƥ���������\n"
-"\n"
-"\n"
-"�����ˤ��Υ����Ф򥤥󥹥ȡ��뤷�Ƥ����Ǥ��͡�\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NIS �ɥᥤ�󤬤ʤ��Τǥ֥����ɥ��㥹�Ȥ��Ȥ��ޤ���"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "FAT�����Υե��åԡ���ɥ饤�� %s ������"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "���Υե��åԡ��� FAT�ե����ޥåȤ��㤢��ޤ���"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"������¸�����ѥå����������Ȥ��ˤϡ����󥹥ȡ���ε�ư���ˡ�linux "
-"defcfg=floppy�פȻ��ꤷ�ޤ���"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "�ե����� %s ���ɤߤȤꥨ�顼�Ǥ�"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"���ʤ��Υޥ����Υϡ��ɤ���ˤϡ���������Ρץɥ饤�Ф�ɬ�פʤ�Τ�\n"
-"����ޤ����ʲ��ξ���򸫤Ƥ�������: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"root �ѡ��ƥ�����󤬸�������ޤ���͡���������Ф�ɬ�פǤ���\n"
-"�������ѡ��ƥ�������Ĥ��뤫����¸�Τ�Τ򥯥�å��������Ӥޤ���\n"
-"�����ơȥޥ���ȥݥ���ȡɥ������������ӡ���/�פ˥��åȤ��ޤ�"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "����åץѡ��ƥ������ɬ�פǤ�"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"����åץѡ��ƥ�����󤬤���ޤ���\n"
-"\n"
-"���鷺��³���ޤ�����"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "/boot/efi �� FAT �ѡ��ƥ�������ޥ���Ȥ��Ƥ�������"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "�ե꡼���ڡ����λ���"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "�������ѡ��ƥ������˳�����Ƥ뽽ʬ�ʥե꡼���ڡ���������ޤ���"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "��¸�Υѡ��ƥ����������"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "¸�ߤ��ʤ��ѡ��ƥ������"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Windows �ѡ��ƥ�������롼�ץХå��˻���"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "�ɤΥѡ��ƥ�������Linux4Win������ޤ���"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "������������"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "�롼�ȥѡ��ƥ������Υ����� (MB)"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "����åץѡ��ƥ������Υ����� (MB): "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "������ɥ����ѡ��ƥ�������Υե꡼���ڡ��������"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "�ɤΥѡ��ƥ�������ꥵ�������ޤ�����"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "������ɥ����ե����륷���ƥ�ζ�����׻�"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT �ꥵ�������ϥѡ��ƥ���������Ǥ��ޤ���\n"
-"�ʲ��Υ��顼��ȯ��: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "������ɥ����ѡ��ƥ���������Ҳ��������Ǥ����ȥǥե饰�ɤ��Ƥ���������"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"���ա�\n"
-"\n"
-"DrakX �Ϥ��줫�饦����ɥ����Υѡ��ƥ�����󥵥������ѹ����ޤ���\n"
-"����:�������ϴ����Ǥ����⤷������ scandisk �򤫤��Ƥ��ʤ���С�\n"
-"�����ǥ��󥹥ȡ�������Ǥ���scandisk�򤫤��ޤ��礦�ʤ����defrag\n"
-"�⤫�����ۤ��������Ǥ�)��\n"
-"�ǡ�����Хå����åפ��Ƥ���ޤ����������ޤΤ����ˤ���\n"
-"�����Ƥ���������\n"
-"����פʤ� Ok �򲡤��Ʋ�������"
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "������ɥ����ѤˤɤΤ��餤�Υ�������Ĥ��Ƥ����ޤ���"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "�ѡ��ƥ������ %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT �Υꥵ�����˼���: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"�ꥵ������롼�ץХå��Ѥ�FAT�ѡ��ƥ�����󤬤���ޤ��� (�ޤ��Ͻ�ʬ�ʥ��ڡ���"
-"��̵��)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "���ǥ������õ�"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Windows(TM) ����"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"ʣ���Υϡ��ɥɥ饤�֤���äƤ��ޤ��͡��ɤ�� linux �򥤥󥹥ȡ��뤷�ޤ�����"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "�ɥ饤�� %s ��Υѡ��ƥ�����󤪤�ӥǡ��������������ޤ�"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "�ѡ��ƥ�������ʬ�ǻ���"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "fdisk��Ȥ�"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"%s ��ѡ��ƥ������Ǥ��ޤ���\n"
-"����ä��顢ɬ����w�פ�Ȥä���¸���ޤ��礦��"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "������ɥ����ѡ��ƥ�������Υե꡼���ڡ�����­��ޤ���"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "���󥹥ȡ����Ѥζ��������Ĥ���ޤ���"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX �ѡ��ƥ�����󥦥������ɤϰʲ��β�ˡ���դ��ޤ���:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "�ѡ��ƥ�����˥󥰤˼���: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "�ͥåȥ���򤿤�������"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "�ͥåȥ������ߤ���"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"���顼ȯ�������ޤ�����������ˡ���狼��ޤ���\n"
-"��ʬ����Ǥ��³���Ʋ�������"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "�ޥ���ȥݥ���� %s ���ŤʤäƤ��ޤ�"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"�������ʥѥå������������Ĥ�������ȥ��󥹥ȡ��뤵��ޤ���Ǥ�����\n"
-"CD-ROM����CD-ROM�Υɥ饤�֤����������褦�Ǥ���\n"
-"���󥹥ȡ���ѤߤΥ���ԥ塼���ǡ��ʲ��Υ��ޥ�ɤ�CD-ROM������å�\n"
-"���ƤߤƤ���������\n"
-"�� rpm -qpl Mandrake/RPMS/*.rpm ��\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "%s �ؤ褦����"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "ͭ���ʥե��åԡ��ɥ饤�֤�����ޤ���"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "���ƥå� ��%s�פ�Ϥ�ޤ�\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"�����ƥ�꥽������­��ޤ��� Mandrake Linux �򥤥󥹥ȡ��뤹��ˤ�\n"
-"�����Ĥ����꤬����ޤ���\n"
-"���ξɾ����������Ȥ��������˥ƥ����ȥ��󥹥ȡ�����ޤ���\n"
-"����򤹤�ˤϡ�CDROM ����֡��Ȥ����Ȥ�����F1�פ򲡤�����text�פ����Ϥ���\n"
-"����������"
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "���󥹥ȡ��륯�饹"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "�ʲ��Υ��󥹥ȡ��륯�饹��ɤ줫����Ǥ�������"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "���ʤ�����������롼�פ����������ϡ��������� %d MB�ˤʤ�ޤ���\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"���󥹥ȡ����̤򸺤餷������С��ѥå������Υѡ�����ȿ���\n"
-"���ꤷ�Ƥ���������\n"
-"\n"
-"����򲼤���ȡ������Ф���פʤ�Τ��������󥹥ȡ��뤵��ޤ���\n"
-"100%% ����ꤹ��ȡ�������ѥå������򤹤٤ƥ��󥹥ȡ��뤷�ޤ���"
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"�ǥ�������˶����ΰ�ˤϡ������Υѥå������� %d%% ��������ޤ���\n"
-"\n"
-"���󥹥ȡ����̤򸺤餷������С��ѡ�����ȿ�����ꤷ�Ƥ���������\n"
-"����򲼤���ȡ������Ф���פʤ�Τ��������󥹥ȡ��뤵��ޤ���\n"
-"%d%% ����ꤹ��ȡ�����¤Υѥå������򥤥󥹥ȡ��뤷�ޤ���"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "���Υ��ƥåפǤϤ�äȺ٤������򤬽���ޤ�"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "���󥹥ȡ��뤹��ѥå�������γ��"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "�ѥå��������롼�פ�����"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "���̥ѥå�����������"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "��ץ�����: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "�ѥå�����������Ƥ��ޤ�"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "̾��: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "�������: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "������: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "����: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "���Υѥå�����������Ǥ��ޤ��󡣥ǥ������ζ������̤���­�Ǥ���"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "�ʲ��Υѥå����������󥹥ȡ��뤵��ޤ�"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "�ʲ��Υѥå���������������ޤ�"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "���Υѥå�����������������Ǥ��ޤ���"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "������Բķ�ʥѥå������Ǥ���������ˤϤǤ��ޤ���"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "���Υѥå�������������ˤǤ��ޤ��󡣤��Ǥ˥��󥹥ȡ���ѤߤǤ�"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"���Υѥå������ϥ��åץ��졼�ɤ�ɬ�פǤ���\n"
-"���������������Ƥ�����Ǥ�����"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "���Υѥå��������������Ǥ��ޤ��󡣥��åץ��졼�ɤ�ɬ�פǤ�"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "��ư���򤵤줿�ѥå�������ɽ��"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "���󥹥ȡ���"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "�ե��åԡ��˥�����/�����ɤ���"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "�ѥå���������ι���"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "�Ǿ����󥹥ȡ���"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "���󥹥ȡ��뤷�����ѥå�����������Dz�����"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "���󥹥ȡ�����"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "����Ƥ��ޤ�"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "�Ĥ���� "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "���󥹥ȡ���ν����桢�������Ԥ���"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d �ѥå�����"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "�ѥå����� %s �Υ��󥹥ȡ���"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "ǧ���"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "����"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Cd-Rom ��򴹤��Ƥ���������\n"
-"�� %s �פȤ��� Cd-Rom ��ɥ饤�֤ˤ���ơ� Ok �򲡤��Ƥ���������\n"
-"CD���ʤ���С�Cancel �򲡤��Ƥ��� Cd-Rom ����Υ��󥹥ȡ������򤷤Ʋ�������"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "���ޤ鷺��˿ʤߤޤ�����"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "�ѥå�����������ǥ��顼��ȯ��:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "�ѥå������Υ��󥹥ȡ���ǥ��顼��ȯ��:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"�ٹ�\n"
-"\n"
-"�ʲ��ξ��򤷤ä����ɤ�Ǥ��������������Ǥ�Ʊ�դǤ��ʤ���ʬ��\n"
-"����м��� CD ��ǥ����Υ��󥹥ȡ����ǧ����ޤ��󡣤��Υ�ǥ�����\n"
-"�Ȥ鷺���󥹥ȡ����³����ˤϡֵ��ݡפ򲡤��Ƥ���������\n"
-"\n"
-"\n"
-"���� CD ��ǥ����˴ޤޤ�륳��ݡ��ͥ�Ȥΰ����ϡ�GPL������饤����\n"
-"��Ŭ�Ѥ���ޤ��󡣤��ξ�硢���줾�줬�ȼ��Υ饤���󥹾������\n"
-"���С�����뤳�Ȥˤʤ�ޤ���\n"
-"�������륳��ݡ��ͥ�Ȥ���Ѥ���������ۤ����ꤹ����ˤϡ���������\n"
-"���̥饤���󥹤��ɤ�Ǥ���ˤ��������褦�ˤ��Ƥ���������\n"
-"���������饤���󥹤Ϥ�����͡���������ݡ��ͥ�Ȥΰ�ž��ʣ���ʥХå�\n"
-"���å���Ū�Τ�Τ�����ˡ������ۡ���С������󥸥˥���󥰡�ʬ��\n"
-"�ե���ѥ��롢�ѹ��ʤɤ�ؤ��Ƥ���Τ��դĤ��Ǥ���\n"
-"��դ��Ф����ȿ�Ϥ������ˡ����������饤���󥹲��ǤΤ��ʤ��θ�����\n"
-"�ü������ޤ��������饤���󥹤ξ�ब��������������ǧ��Ƥ��ʤ��¤�\n"
-"ʣ���Υ����ƥ�ˤ��Υץ������򥤥󥹥ȡ��뤷���ꡢ�ͥåȥ����\n"
-"�ǻȤ��褦�ˤ�����ϤǤ��ޤ���������������Ȥ��ˤϡ����Υ���ݡ�\n"
-"�ͥ�Ȥ����ۼԤ��Խ��Ԥ�ľ���䤤��碌�Ƥ���������\n"
-"������������ݡ��ͥ�ȤΡ��軰�Ԥؤΰ�ž��ʣ���ϡ��ɥ�����ơ������\n"
-"��ޤ��̾�϶ػߤ���Ƥ��ޤ���\n"
-"\n"
-"\n"
-"����CD ��ǥ����Υ���ݡ��ͥ�Ȥ˴ؤ��븢���Τ��٤Ƥϡ����줾���\n"
-"��Ԥ�°�������եȥ������ץ�������Ŭ�Ѥ������Ū�⻺�����ˡ��\n"
-"��ä��ݸ��Ƥ��ޤ���\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "���顼ȯ��"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "�����˥��󥹥ȡ�������Ǥ��ޤ�����"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "���եȻ��ѥ饤���󥹾��"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"�Ϥ����\n"
-"\n"
-"�ܥ��ڥ졼�ƥ��󥰥����ƥप���Mandrake Linux�ǥ����ȥ�ӥ塼������\n"
-"�󶡤����Ƽ�Υ���ݡ��ͥ�Ȥ򡢰ʲ��Ǥϡ֥��եȥ��������ʡפȸƤ֡�\n"
-"���եȥ��������ʤϡ����ڥ졼�ƥ��󥰥����ƥप���Mandrake Linux�ǥ���\n"
-"�ȥ�ӥ塼�������󶡤����Ƽ�Υ���ݡ��ͥ�Ȥ˴�Ϣ����ץ�����ෲ\n"
-"��᥽�åɡ���������ɥ�����ơ�������ޤब������˸¤����Τ�\n"
-"�Ϥʤ���\n"
-"\n"
-"\n"
-"1. �饤����Ʊ�ջ���\n"
-"\n"
-"����ʸ��򿵽Ť��ɤ�Ǥ�����������ʸ��Ϥ��ʤ���Mandrake S.A.�Ȥδ֤�\n"
-"���뤵��롢���եȥ��������ʤ�Ŭ�Ѥ����饤����Ʊ�ջ���Ǥ���\n"
-"���եȥ��������ʤ򤤤��ʤ���Ǥ��쥤�󥹥ȡ��롢ʣ�������Ѥ��뤳�Ȥ�\n"
-"���ʤ�������Ū�ˡ��ܥ饤���󥹤���������˽������Ȥ��������\n"
-"������Ʊ�դ�����ΤȤ���ޤ���\n"
-"�ܥ饤���󥹤Τ����ʤ���ʬ�Ǥ���Ʊ�դǤ��ʤ���С����եȥ��������ʤ�\n"
-"���󥹥ȡ��롢ʣ�������Ѥ�ǧ����ޤ���\n"
-"�ܥ饤���󥹤ξ������Ŭ�礷�ʤ����ǥ��եȥ��������ʤ򥤥󥹥ȡ���\n"
-"ʣ�������Ѥ��褦�Ȥ����ߤ�̵���Ǥ��ꡢ�ܥ饤���󥹲��ǤΤ��ʤ��θ���\n"
-"����å���뤳�ȤȤʤ�ޤ����饤���󥹤��˴���ȼ�������ʤ��ϥ��եȥ�����\n"
-"���ʤ�ʣ�����٤Ƥ�¨�¤��˲����ʤ���Фʤ�ޤ���\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "�����ܡ���"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "�����ܡ��ɥ쥤�����Ȥϲ��Ǥ�����"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "�Ȥ��륭���ܡ��ɥ쥤�����Ȥΰ�����ɽ�����ޤ���"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "�ɤΥ��󥹥ȡ��륯�饹��˾�ߤޤ�����"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "���󥹥ȡ���/����"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "���󥹥ȡ���Ǥ����������Ǥ�����"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "�侩"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "�������ѡ���"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "����"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "�ѥå����������򹹿�"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "�ޥ����η��Ϥʤ�Ǥ�����"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "�ޥ����ݡ���"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "�ޥ����ϤɤΥ��ꥢ��ݡ��ȤˤĤʤ��äƤ��ޤ�����"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "�ܥ��󥨥ߥ�졼�����"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "�ܥ���2�Υ��ߥ�졼�����"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "�ܥ���3�Υ��ߥ�졼�����"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA�����ɤ�������..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE ������"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "�Ȥ���ѡ��ƥ�����󤬤���ޤ���"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "�ѡ��ƥ������򥹥���󤷤ƥޥ���ȥݥ���Ȥ�õ���Ƥ��ޤ�"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "�ޥ���ȥݥ���Ȥ�����"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"�ѡ��ƥ������ơ��֥뤬�ɤ�ޤ��󡤲���Ƥ���褦�Ǥ�:(\n"
-"�����ʥѡ��ƥ�������ä��Ƥߤޤ��礦�����ʤ�����ȥǡ����������ä���"
-"������\n"
-"���뤤�ϡ�DrakX�˥ѡ��ƥ������ơ��֥���ѹ������ʤ��꤬����ޤ���\n"
-"(���顼��%s�Ǥ�)\n"
-"\n"
-"���ѡ��ƥ�������õ�Ƥ�������Ǥ��͡�\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake �ϥѡ��ƥ������ơ��֥���������ɤ�ޤ���Ǥ�����\n"
-"����������ϲ��������Ƥ⤷��ޤ���衪"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"1MB �֡��ȥ��ȥ�å��Ѥζ������ڡ���������ޤ��󡪡����󥹥ȡ����³���ޤ�"
-"���������ƥ�ε�ư�ˤ� DiskDrake �ǥ֡��ĥ��ȥ�åץѡ��ƥ��������äƤ���"
-"����."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "�����Ǥ���롼�ȥѡ��ƥ�����󤬸��Ĥ���ޤ���"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "�롼�ȥѡ��ƥ������"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "�����ƥ�Υ롼�ȥѡ��ƥ������(/) �Ϥʤ�Ǥ�����"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "�ѡ��ƥ������ơ��֥���ѹ���ȿ�Ǥ���ˤϥ�֡��Ȥ��Ƥ�������"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "�ե����ޥåȤ���ѡ��ƥ�����������Ǥ�������"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "���ɥ֥��å��򸡺����ޤ�����"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "�ѡ��ƥ�������ե����ޥå�"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "�ե����� %s �κ����ȥե����ޥå�"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "���󥹥ȡ���˽�ʬ�ʥ���åפ�����ޤ��󡤥���åפ�ä��Ʋ�����"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "������Υѥå������򤵤����Ƥ��ޤ�"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "���åץ��졼�ɤ���ѥå������򤵤����Ƥ��ޤ�"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"���󥹥ȡ���䥢�åץ��졼�ɤ�ɬ�פʥǥ������ζ������̤���­�Ǥ��� (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "���� (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "�Ǿ� (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "�侩 (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"�ե��åԡ��ؤΥѥå������������¸���ɤ߹��ߤ�����Ǥ���������\n"
-"������ auto_install �����������ե��åԡ���Ʊ���Ǥ���"
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "�ե��åԡ������ɤ߹���"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "�ե��åԡ������ɤ߹�����"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "�ѥå�����������"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "�ѥå�������������ä��ե��åԡ�������"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "�ե��åԡ��˥����֤���"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "�������ΤΥ������϶������ڡ�����ۤ��Ƥ��ޤ�"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "���󥹥ȡ���μ���"
-
-#: ../../install_steps_interactive.pm_.c:672
-#, fuzzy
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"�ѥå��������롼�פ����Ф�Ƥ��ޤ���\n"
-"������ߤ������󥹥ȡ��������Ǥ�������"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "X ��Ȥ�"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "����Ū�ʥɥ�����ơ������������ʿ侩����"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "�����˺���¤Υ��󥹥ȡ����urpmi ��ʤ���"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"�嵭�ΰ�����CD�����٤Ƥ����äƤ���С�Ok�򥯥�å����ޤ��礦��\n"
-"CD����Ĥ�ʤ���С�����󥻥�򥯥�å����Ƥ���������\n"
-"�긵�ˤʤ�CD������С���������򤫤�Ϥ����Ƥ���Ok�򥯥�å����ޤ���"
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "�� %s �פȤ���Cd-Rom"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "���󥹥ȡ���ν���"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"�ѥå����� %s �򥤥󥹥ȡ���\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "���󥹥ȡ�����������"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "�Ȥä���ư�ե��åԡ���ɥ饤�� %s ������"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "�����⥸�塼��ե��åԡ���ɥ饤�� %s ���������Ʋ�����"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"�������Ź沽�ѤΥ��եȤ����������ɤ���������Ǥ��ޤ�����\n"
-"\n"
-"�ٹ�:\n"
-"\n"
-"�����Υ��եȤ��Ф����׷�䡢���Ϥ�ˡ���٤Τ�������������������Τǡ�\n"
-"���Υ��եȤΤ����ͤ䥨��ɥ桼���ϡ���ʬ�ν�°����ˡ���٤Τ�Ȥǡ�����\n"
-"�������եȤΥ���������ɤ���¸�����Ѥʤɤ�ǧ����Ƥ��뤫�ɤ�����ʬ\n"
-"�dz�ǧ���Ƥ���������\n"
-"\n"
-"����ˤ����ͤ䥨��ɥ桼���ϡ���ʬ�ν�°����ˡ���٤�ˡ�����˰�ȿ���ʤ�\n"
-"�褦�褯���դ��Ƥ��������������ͤ䥨��ɥ桼������������ˡ�����ε����\n"
-"º�Ť��ʤ����ˤϡ�����ʽ�ȳ�оݤȤʤ�����򤪤������Ȥˤʤ�ޤ���\n"
-"\n"
-"����Ʊ�ս�˽�̾������˸ܵҤ䥨��ɥ桼���������������븫���ߤΤ��롢\n"
-"�����Υ��եȥ�������Ȥ����ݻ��������뤤�ϥ���������ɤ��뤳�Ȥˤ��\n"
-"�ü졢���ܡ���ȯ�ʤɰ��ڤ�»���ʤ���ˤ����»������̳����ߡ����ѥǡ�����\n"
-"�Ӽ����Ϣ»����ˡ��Ƚ�Ǥ˴�Ť�»�������������ʧ���ʤɤ��ޤޤ�뤬\n"
-"����˸¤����ΤǤϤʤ��ˤˤĤ��ơ�Mandrakesoft �䤽����¤�ȼԤ�\n"
-"���ץ饤��Ϥ����ʤ���ˤ�ʤ����Ǥ������ʤ���\n"
-"\n"
-"�ʾ�μ����ˤĤ��Ƥ��䤤��碌�ϡ��ʲ���Ϣ���Τ��ȡ�\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"�ǥ����ȥ�ӥ塼�����������ʹߤ˹������줿�ѥå�������\n"
-"����������ɤǤ��ޤ���\n"
-"\n"
-"�������ƥ��ե��å�����Х��ե��å����������ޤ�����\n"
-"����ˤϥ��󥿡��ͥå���³��ɬ�פǤ���\n"
-"\n"
-"�����ѥå������򥤥󥹥ȡ��뤷�ޤ�����"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Mandrake Linux �����Ȥ���³���ƥߥ顼������������Ƥ��ޤ�"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "�ɤΥ����Ȥ���ѥå���������äƤ��뤫������"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "�����Ȥ���³���ƥѥå�����������������Ƥ��ޤ�"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "���ʤ��λ����ӤϤɤ�Ǥ�����"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "�ϡ��ɥ����������å��� GMT �˥��åȤ��Ƥ���ޤ�"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "��ư���֤��碌��NTP��Ȥ���"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP ������"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "��⡼��CUPS ������"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "�ץ�󥿤ʤ�"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "ISA ������ɥ����ɤϤ���ޤ�����"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"���󥹥ȡ����ˡ�sndconfig�פ�¹Ԥ��ƥ�����ɥ����ɤ����ꤷ�Ƥ���������"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"������ɥ����ɤ����ФǤ��ޤ���Ǥ�����\n"
-"���󥹥ȡ����ˡ�harddrake�פ��Ƥ�������"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "�ޤȤ�"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "�ޥ���"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "������"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "�ץ��"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN������"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "������ɥ�����"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "�ƥ�ӥ�����"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "��������ե�����"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "�롼�ȥѥ����"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "�ѥ���ɤʤ�"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "���Υѥ���ɤϴ�ñ�����ޤ��ʺ���Ǥ� %d ʸ���ȤäƤ���������"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "ǧ��"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "ǧ��LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP�١���dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP������"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "ǧ��NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS �ɥᥤ��"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS ������"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"��������֡��ȥǥ�����������ȡ��̾�Υ֡��ȥ�������Ȥ鷺�� Linux ��\n"
-"��ư�Ǥ��ޤ���SILO �򥤥󥹥ȡ��뤷�����ʤ����䡢¾�� OS ��\n"
-" SILO ���������硢�ޤ��ϥϡ��ɥ���������Τ��� SILO �����ޤ���ư\n"
-"���ʤ����˻��ѤǤ��ޤ���\n"
-"��������֡��ȥǥ������ϡ�Mandrake �Υ����ƥ������ѤΥ쥹���塼���᡼��\n"
-"�Ȥ��Ƥ���ѤǤ��ޤ������줬����Х����ƥब�����ˤ������ä��Ȥ���\n"
-"���줹��Τ��ڤˤʤ�ޤ���\n"
-"�֡��ȥǥ���������ʤ�С��ե��åԥ��ǥ�������ɥ饤�֤���������\n"
-"��OK�פ򲡤��Ƥ���������"
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "�ǽ�Υե��åԡ��ɥ饤��"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "�����ܤΥե��åԡ��ɥ饤��"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "�����å�"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"��������֡��ȥǥ�����������ȡ��̾�Υ֡��ȥ�������Ȥ鷺�� Linux ��\n"
-"��ư�Ǥ��ޤ���LILO (�ޤ���GRUB)�򥤥󥹥ȡ��뤷�����ʤ����䡢¾�� OS ��\n"
-" LILO ���������硢�ޤ��ϥϡ��ɥ���������Τ��� LILO �����ޤ���ư\n"
-"���ʤ����˻��ѤǤ��ޤ���\n"
-"��������֡��ȥǥ������ϡ�Mandrake �Υ����ƥ������ѤΥ쥹���塼���᡼��\n"
-"�Ȥ��Ƥ���ѤǤ��ޤ������줬����Х����ƥब�����ˤ������ä��Ȥ���\n"
-"���줹��Τ��ڤˤʤ�ޤ����֡��ȥǥ���������ޤ�����\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(�ٹ𡪡�root �ѡ��ƥ������� XFS ��ȤäƤ��ޤ��͡�\n"
-"1.44 Mb �ե��åԡ��ǵ�ư�ǥ���������ΤϤ��֤�̵���Ǥ���\n"
-"XFS �ϤȤƤ��礭�ʥɥ饤�Ф�ɬ�פ�����Ǥ�)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "ͭ���ʥե��åԡ��ɥ饤�֤�����ޤ��󡤤����ʤ���"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "�֡��ȥǥ��������ꤿ���ե��åԥ��ɥ饤�֤�����"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "�ե��åԡ���ɥ饤�� %s ������"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "�֡��ȥǥ������κ���"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "�֡��ȥ������ν���"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"�ȤƤ�Ť�����̤�ΤΥޥ����ȤäƤ���褦�Ǥ��͡�\n"
-"yaboot �֡��ȥ������Ϥ���ǤϻȤ��ޤ���\n"
-"���󥹥ȡ����³���ޤ������ޥ���ε�ư�ˤ�\n"
-"BootX ��ȤäƤ�������"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "aboot ��Ȥ��ޤ�����"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"aboot ���󥹥ȡ�����˥��顼ȯ����\n"
-"̵���˥��󥹥ȡ��뤷�Ƥߤޤ��������������ǽ�Υѡ��ƥ�������˲�����ޤ���"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "�֡��ȥ��������󥹥ȡ�����"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "�֡��ȥ������Υ��󥹥ȡ���˼��Ԥ��ޤ������ʲ��Υ��顼��ȯ��:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"�����ץ�ե����०������ư�ǥХ������ѹ����ʤ��ȡ��֡��ȥ�������\n"
-"ͭ���ˤʤ�ʤ����⤷��ޤ��󡣺Ƶ�ư���ƥ֡��ȥ������Υץ���ץ�\n"
-"���Фʤ��ä��顢�Ƶ�ư���� Command-Option-O-F �򲡤��Ƥ������Ϥ��ޤ�:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" ���줫�餳�������פ��ޤ�: shut-down\n"
-"���ε�ư���ˤϥ֡��ȥ������Υץ���ץȤ��Ф�Ϥ��Ǥ���"
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "���Υե��åԡ���ɥ饤�� %s ���������Ʋ�����"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "���󥹥ȡ���ե��åԡ��μ�ư����"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"�����Ĥ��Υ��󥹥ȡ��륹�ƥåפ��Դ����Ǥ���\n"
-"\n"
-"�����˽�λ���ޤ�����"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"����ǤȤ��������ޤ�!�����󥹥ȡ��봰λ�Ǥ���\n"
-"�֡����ѥ�ǥ�����ȴ���ơ��꥿����򲡤��ƺƵ�ư���Ʋ�������\n"
-"\n"
-"\n"
-"���ΥС������� Mandrake Linux �ΥХ���������ϡ�\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3 ��Ĵ�٤��ޤ���\n"
-"\n"
-"\n"
-"���󥹥ȡ���������ˤĤ��Ƥϥ桼�������ɤΡ֥��󥹥ȡ��뤷����פ�\n"
-"�Ϥ򻲾Ȥ��Ʋ�������"
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "���󥹥ȡ���ե��åԡ��μ�ư����"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"��ư���󥹥ȡ���ϡ���˾�����Ű��Ū�˼�ư���Ǥ��ޤ���\n"
-"���ξ�硢�ϡ��ɥǥ������ϴ����˽񤭴������ޤ��衪\n"
-"(������̤Υޥ���ؤΥ��󥹥ȡ����ѤΤ�ΤǤ�).\n"
-"\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "����ư"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "����"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "�ѥå������������¸"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux ���󥹥ȡ��� %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr "  <Tab>/<Alt-Tab> ���Ǵ֤ΰ�ư  | <Space> ���� | <F12> ���β��� "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu ������ޤ���"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "consolehelper ������ޤ���"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "�ե����������"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "���٤�����"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "����"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "���Ԥ�������"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "����"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "�ĥ꡼��ΤФ�"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "�ĥ꡼��̤��"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "���Τޤޤȥ��롼���̤��ڤ��ؤ�"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "���������򡤤⤦���ٻ�Ʋ�����\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "�ɤ�ˤ��ޤ������ʥǥե���Ȥ� %s��"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"�ʲ��Υ���ȥ�����Ϥ��Ƥ�������:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "�ɤ�ˤ��ޤ�������0/1, �ǥե���Ȥ� %s��"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "�ܥ����%s��: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "���Υܥ���򥯥�å����ޤ�����"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "�ɤ�ˤ��ޤ������ʥǥե���Ȥ� `%s'%s��"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> �����Ϥ�����������ޤ� (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"10�Τʤ��Ǥɤ���Խ����������ǽ�ο���������Ƥ���������\n"
-"���뤤��ñ�� Enter �򲡤�����˿ʤߤޤ���\n"
-"�ɤ�ˤ��ޤ�����"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> ���ա���٥뤬�Ѥ��ޤ���:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "��Ͽ���ʤ���"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "������ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "�ɥ���"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "���ڥ���"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "�ե������"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "�ե��"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "�Υ륦����"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "�ݡ�����"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "���������ǥ�"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "�����ꥹ�������ܡ���"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "����ꥫ�������ܡ���"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "����Х˥�"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "�����˥��ʸŤ���"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "�����˥��ʥ����ץ饤������"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "�����˥���ȯ�������"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "������Х������(��ƥ�)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "�٥륮��"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "�����˥���ȯ�������"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "�֥륬�ꥢ (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "�֥饸��"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "�٥�롼��"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "�������ʥɥ��ļ������"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "�������ʥե�󥹼������"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "������ (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "�ɥ��ġʥǥåɥ����ʤ���"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "�ǥ�ޡ���"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (�Υ륦����)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (���������ǥ�)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "�����ȥ˥�"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "���른���ʡ֥��������������"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "���른���ʡ֥�ƥ�������"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "���ꥷ��"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "�ϥ󥬥꡼"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "�����饨��"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "�����饨���ȯ�������"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "�����"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "�����ꥢ"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "���ܸ�106�����ܡ���"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "ī���������ܡ���"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "��ƥ󥢥�ꥫ"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "��ȥ��˥� AZERTY (��)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "��ȥ��˥� AZERTY (��)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "��ȥ��˥� �ֿ������ QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "��ȥ��˥� ��ȯ���� QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "��ȥ�����"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "�ޥ��ɥ˥�"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "�ݡ����ɡ�qwerty �����"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "�ݡ����ɡ�qwertz�����"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "�ݥ�ȥ���"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "���ʥ��ʥ��٥å���"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "�롼�ޥ˥���qwertz��"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "�롼�ޥ˥���qwerty��"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "��������Yawerty��"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "�����٥˥�"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "�������� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "�������� (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "����ӥ�(cyrillic)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "���ߥ�"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "�����������ܡ���"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "�������������ܡ���"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "�ȥ륳������Ū�֣ơץ�ǥ��"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "�ȥ륳�ʸ���֣ѡץ�ǥ��"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "�����饤��"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "����ꥫ�������ܡ��ɡʹ�ݼ���"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "�٥ȥʥ� �ֿ������ QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "�桼������ӥ��ʥ�ƥ��"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "�� Alt ����"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "�����Υ��եȥ�����Ʊ����"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Control �ȥ��եȤ�Ʊ����"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock ����"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl �� Alt ������Ʊ����"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt �ȥ��եȥ�����Ʊ����"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "�֥�˥塼�ץ���"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "���֥�����ɥ����ץ���"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "���֥�����ɥ����ץ���"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "���ޥ���� %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "�ޤ������ܥ�塼��������Ƥ���������\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"2.2�����ͥ��Ѥ� PCMCIA ���ݡ��ȤϤ⤦�ޤޤ�Ƥ��ޤ���\n"
-"2.4�������ͥ��ȤäƤ���������"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - �ޥ���"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "���� PS/2 �ۥ�����ޥ���"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 �ܥ���"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "���Ѥ�2�ܥ���ޥ���"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "����"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "�ۥ�����"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "�ޥ��������եȡ�����ƥ�ޥ����ʥ��ꥢ���"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "���Ѥ�3�ܥ���ޥ���"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "�ޥ��������եȡ�����ƥ�ޥ�����PS/2��"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC ���꡼�� (���ꥢ��)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (���ꥢ��, �Ť� C7 ������)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "�Х��ޥ���"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2�ܥ���"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3�ܥ���"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "�ʤ�"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "�ޥ����ʤ�"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "�ޥ�����ƥ��Ȥ��ƤߤƤ���������"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "�ޥ�����ͭ���ˤ���ˤϡ�"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "�ۥ������ư�����Ƥ���������"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-"adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-1,-*-fixed-medium-r-"
-"normal--24-*-100-100-c-*-jisx0208.1983-0,*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "��λ"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "�� ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- ��ɤ�"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "������ɽ������ޤ�������"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "���󥿡��ͥåȤ���³"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"adsl ����³����դĤ��Τ�����ϡ�pppoe�Ǥ���\n"
-"�Ǥ⡢pptp�䡢dhcp�����Ȥ�ʤ���³�⤢��ޤ���\n"
-"�狼��ʤ���С���pppoe��Ȥ��פ�����Ǥ���������"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dhcp��Ȥ�"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pppoe��Ȥ�"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pptp��Ȥ�"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"�ɤ�dhcp���饤����Ȥ�Ȥ��ޤ�����\n"
-"�ǥե���Ȥ� dhcpcd�Ǥ�"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"�����ƥ��˥������ͥåȥ����ץ������Ĥ���ޤ��󡣤��μ����\n"
-"��³������Ǥ��ޤ���"
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "�ͥåȥ�����󥿡��ե�����������"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "���󥿡��ͥå���³�˻Ȥ��ͥåȥ�������ץ������Ӥޤ��礦"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "�ͥåȥ�������ɤ����դ���ޤ���"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "�ͥåȥ��������"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"�ۥ���̾��ʬ����ʤ顢��������Ϥ��Ʋ�������\n"
-"�����Ĥ���DHCP�����Ф�ư���Τ˥ۥ���̾��ɬ�פȤ��ޤ���\n"
-"�ۥ���̾�ϡ�mybox.mylab.myco.com�ɤΤ褦�����¤��Ʋ�������"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "�ۥ���̾:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "�ͥåȥ�����ꥦ��������"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "���� ISDN ��ǥ�"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "��¢ISDN������"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "�ɤμ����ISDN��³�Ǥ�����"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"�ɤ�ISDN ���꤬�����Ǥ���?\n"
-"\n"
-"* �Ť������ isdn4net ��Ȥ��ޤ������Ϥʥġ��뤬����ޤ�����\n"
-"  �鿴�Ԥˤ����꤬�ऺ����������ɸ��ǤϤ���ޤ���\n"
-"\n"
-"* ����������Ϥ狼��䤹����ɸ��Ū�Ǥ������ġ���Ͼ��ʤ��Ǥ���\n"
-"\n"
-"������ϡ���Ԥηڤ�����Τۤ��Ǥ���\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "�����������isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "�Ť����� (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN������"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"�ץ��Х���������Ǥ���������\n"
-"�⤷�ꥹ�Ȥˤʤ���С�Unlisted������Ǥ���������"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "�衼���åѤΥץ��ȥ���"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "�衼���åѥץ��ȥ��� (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "�����Τ���¾�ѥץ��ȥ���"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"�����Τ���¾�ѥץ��ȥ��� \n"
-" D-Channel �Ǥʤ�(�꡼�����줿����)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "�ɤΥץ��ȥ����Ȥ��ޤ�����"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "�ɤ�ʥ����ɤ�ȤäƤ��ޤ�����"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "ʬ����ʤ�"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"�⤷ISA�����ɤ���äƤ����顢���β��̤��ͤ�Ŭ�ڤǤ��礦��\n"
-"\n"
-"�⤷PCMCIA�����ɤ���äƤ����顢�����ɤ�irq��io���Τ�ɬ�פ�����ޤ���\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "����"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "³����"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "���ʤ���ISDN�����ɤϤɤ�Ǥ�����"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ISDN �����ɤ򸡽Ф��ޤ������������פ�ʬ����ޤ��󡣼��β��̤��� PCI �����ɤ�"
-"����Ǥ���������"
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ISDN PCI �����ɤϸ��դ���ޤ���Ǥ��������β��̤�������Ǥ�������"
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "��ǥ�ϤɤΥ��ꥢ��ݡ��ȤˤĤʤ��äƤ��ޤ�����"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "�������륢�åץ��ץ����"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "��³̾"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "�����ֹ�"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "�������� ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "������ץȤ�Ȥ�ǧ��"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "�����ߥʥ뤫���ǧ��"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "�ɥᥤ��̾"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "DNS �����Сʥ��ץ�����"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "������� DNS �����Сʥ��ץ�����"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"��³���ڤ뤫�����뤤�Ϻ����ꤷ�Ƥ���������"
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"���󥿡��ͥå���³�������Ǥ��ޤ���"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "���󥿡��ͥåȤ���³����Ƥ��ޤ���"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"���󥿡��ͥåȤ���³���뤫��³������ꤷ�Ƥ�������"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "���ߤϥ��󥿡��ͥåȤ���³���Ƥ��ޤ���"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "��³"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "����"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "��³������"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "���󥿡��ͥå���³������"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "�Ǥ� %s ��³�����ꤷ�ޤ��礦��"
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"�Ǥ� %s ��³�����ꤷ�ޤ��礦��\n"
-"\n"
-"\n"
-"��OK�פ򲡤��ƻϤ�ޤ��礦��"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "�ͥåȥ��������"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"�ͥåȥ�����󥹥ȡ���򤷤Ƥ���Τǡ��ͥåȥ��������ѤߤǤ���\n"
-"���ޤ�����򤽤Τޤ޻Ȥ��ˤ� OK �򥯥�å����Ƥ����������ͥåȥ��/���󥿡�"
-"�ͥåȤ�����ꤹ��ˤϥ���󥻥�򲡤��ޤ���\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"�ͥåȥ�����ꥦ�������ɤؤ褦����\n"
-"\n"
-"�����ϥ��󥿡��ͥå�/�ͥåȥ����³�����ꤹ��Ȥ����Ǥ���\n"
-"��ư���Ф�Ȥ������ʤ���С������å���Ϥ����Ƥ���������\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "���ꤹ��ץ��ե����������"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "��ư���Ф�Ȥ�"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "�ǥХ����θ�����Ǥ��ġ�"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "�դĤ��Υ�ǥ���³������"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "�ݡ��� %s �Ǹ��Ф��ޤ���"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN ��³"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s �򸡽�"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL ��³"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "���󥿡��ե����� %s �Ǹ���"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "�����֥���³"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "�����֥���³�����Ф���ޤ���"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN ��³"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "�������ͥåȥ����ɤ����Ф���ޤ���"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "���ꤷ������³������Dz�����"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"���󥿡��ͥå���³��ˡ��ʣ�����ꤷ�ޤ����͡�\n"
-"�ɤ��Ȥ�������Ǥ���������\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "���󥿡��ͥå���³"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "�֡��Ȼ�����³�򳫻Ϥ��ޤ�����"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "�ͥåȥ������"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "�ͥåȥ����Ƶ�ư���Ƥ�������"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"�ͥåȥ����Ƶ�ư���˥��顼ȯ��: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"����ǤȤ��������ޤ����ͥåȥ���ȥ��󥿡��ͥå���³����λ�Ǥ���\n"
-"\n"
-"����򤳤줫�饷���ƥ��ȿ�Ǥ����ޤ���\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"���줬����ä��顢X ������ɥ��Ķ���Ƶ�ư�����ơ��ۥ���̾�ѹ���ȼ��\n"
-"�������򤷤Ƥ���������"
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"����������꤬�����ޤ�����\n"
-"net_monitor �� mcc����³������å����Ƥ�����������³���Ǥ��Ƥ��ʤ���������"
-"�Ƶ�ư�����ۤ����������⤷��ޤ���"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"�ٹ�: ���ΥǥХ����ϡ����Ǥ˥��󥿡��ͥå���³�Ѥ����ꤵ��Ƥ��ޤ���\n"
-"��Ȥ������Ĥ�������С����Τޤ� OK �򲡤��Ƥ���������\n"
-"�ʲ��Υե�����ɤ��ѹ�����ȡ����꤬�Ѥ�äƤ��ޤ��ޤ���"
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"���Υޥ���� IP ���ɥ쥹�����Ϥ��Ʋ�������\n"
-"�ơ��ι��ܤˤϥɥåȤǶ��ڤ�줿���ʿ�(�㡤1.2.3.4)��IP ���ɥ쥹�Ȥ������Ϥ�"
-"��ޤ���"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "�ͥåȥ���ǥХ��� %s ������"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (�ɥ饤�� %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP ���ɥ쥹:"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "�ͥåȥޥ���:"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP �μ�ư����"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ���ɥ쥹�� 1.2.3.4 �Τ褦�����Ϥ��Ʋ�����"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"�ۥ���̾�����Ϥ��Ʋ�������\n"
-"�ۥ���̾�ϡ�mybox.mylab.myco.com�ɤΤ褦�ˤ��Ʋ�������\n"
-"�⤷�����ȥ�����������С����� IP ���ɥ쥹�����Ϥ��Ʋ�������"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS ������"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "�����ȥ����� (�� %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "�����ȥ������ǥХ���"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "�ץ�����������"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "�ͥåȥ�������ɤ�id�����סʥ�åץȥåפ�������"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy �� http://... �Ǥ�"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy �� ftp://... �Ǥ�"
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "���󥿡��ͥåȤ�����"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "�����󥿡��ͥåȤ���³���ޤ�����"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "��³��ƥ��Ȥ��Ƥ��ޤ�..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "�����ƥ�ϥ��󥿡��ͥåȤ���³���ޤ�����"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "�������ƥ������ͳ�ǡ���³���ڤ�ޤ���"
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"���Υޥ���ϥ��󥿡��ͥåȤؤĤʤ��äƤ��ʤ��褦�Ǥ��͡�\n"
-"��³���������ʤ����ƤߤƤ���������"
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "��³������"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "���Υե�����ɤ����뤫�����å����Ƥ�������"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "������ IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "������ mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "������ IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "������ IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "������ IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "���ʤ��������ֹ�"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "�ץ��Х�����̾�� (�� provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "�ץ��Х����������ֹ�"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "�ץ��Х����� dns 1 (���ץ����)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "�ץ��Х����� dns 2 (���ץ����)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "�������"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "��������⡼��"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "��³��®��: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "��³�Υ����ॢ���ȡ��á�"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "��������ȥ�������ʥ桼��̾��"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "��������ȥѥ����"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "�ޥ���Ȥ˼���: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "���Υޥ���Ǥϡ���ĥ�ѡ��ƥ������ϥ��ݡ��Ȥ���Ƥ��ޤ���"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"�ѡ��ƥ������ơ��֥��̤����η꤬����ޤ������Ȥ��ޤ���\n"
-"�ɤ����Ƥ�Ȥ�������С��ץ饤�ޥ�ѡ��ƥ��������ư���ơ�̤����η��\n"
-"��ĥ�ѡ��ƥ��������٤ˤ�äƤ��ޤ��礦��"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s �ե����뤫������������Ԥ��ޤ����� %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "�Хå����åץե����뤬����Ƥ��ޤ�"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "�ե����� %s �ؤν񤭹��ߥ��顼"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"�ɥ饤�֤��ɤ���ޤ������ȤˤʤäƤ���褦�Ǥ���\n"
-"�ǡ����������������å����̤�ޤ���\n"
-"�Ĥޤ�ǥ������ؽ񤭹��ߤ򤷤Ƥ�ǡ���������㤯����ˤʤ�ޤ���"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ɬ��"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "����"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "����Ⱥǹ�"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "����Ȥ��줷��"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "���äƤ⤤��"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - ���� Unix ���������ƥ�"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation�ʿ������"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - �饤��ץ�󥿥ǡ����"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue�ʥ��塼�ʤ��ǰ�����"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "��������ץ��"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "��⡼�ȥץ��"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "��⡼��CUPS �����о�Υץ��"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "��⡼�� lpd�����о�Υץ��"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "�ͥåȥ���ץ�󥿡�TCP/�����åȡ�"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/������ɥ��� 95/98/NT�����о�Υץ��"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "NetWare �����о�Υץ��"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "�ץ�󥿥ǥХ�����URI������"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "����֤򥳥ޥ�ɤإѥ���"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "̤�ΤΥ�ǥ�"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "��������ץ��"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "��⡼�ȥץ��"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " �ʲ��Υѥ���ݡ��Ⱦ� \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB �ץ�� \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", �ѥ���ݡ��Ⱦ��¿��ǽ�ǥХ��� \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr "USB ���¿��ǽ�ǥХ���"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", HP JetDirect���¿��ǽ�ǥХ���"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", ¿��ǽ�ǥХ���"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr "%s �ذ���������"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "LPD ������ ��%s�׾��, �ץ�󥿡�%s��"
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP �ۥ��ȡ�%s��, �ݡ��� %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "������ɥ��������� ��%s�׾��, ��ͭ��%s��"
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "Novell ������ ��%s�׾��, �ץ�󥿡�%s��"
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", ���ޥ�ɡ�%s�פ����"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "���Υץ�󥿡ʥɥ饤�Фʤ���"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(%s���)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "�ʤ��Υޥ����ǡ�"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS �����С�%s�׾��"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (�ǥե����)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "�ץ�󥿤���³������Ǥ�������"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "�ץ�󥿤Ϥɤ��Ĥʤ��äƤ��ޤ�����"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"��⡼�� CUPS �����о�Υץ�󥿤ϡ������Ǥ��������פǤ���\n"
-"�ץ�󥿤ϼ�ư���Ф���ޤ���"
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS ����"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "CUPS ���������"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"��������ͥåȥ����� CUPS �����о�Υץ�󥿤˥�����������ʤ顢����\n"
-"���ꤹ��ɬ�פϤ���ޤ���CUPS �����Ф���ưŪ�˥ץ�󥿤ξ����ή���Ƥ����"
-"����\n"
-"�ޥ���ǧ�����Ƥ���ץ�󥿤Ϥ��٤ơ�Printerdrake �μ祦����ɥ��Ρ֥�⡼"
-"��\n"
-"�ץ�󥿡פ˵󤬤äƤ��ޤ�����������ͥåȥ����� CUPS �����Ф��ʤ���"
-"�С�\n"
-"CUPS �����Ф� IP ���ɥ쥹�ȡ����ˤ�äƤϥݡ����ֹ���ư�����Ϥ��ơ�����"
-"��\n"
-"����ץ�󥿾�����餦�������뤤�Ϥ��������ˤ��Ƥ����ޤ���"
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"�̾�ϡ�CUPS �ϼ�ưŪ�˥ͥåȥ���Ķ��ˤ��碌�����ꤵ��ơ�\n"
-"��������ͥåȥ���� CUPS �����о�Υץ�󥿤˥��������Ǥ���\n"
-"�褦�ˤʤ�ޤ����Ǥ���������ǽ���ʤ��ʤ顢�ּ�ưCUPS����פ�\n"
-"���դˤ��ơ�/etc/cups/cupsd.conf ���ǽ񤭴����Ƥ��ޤ���\n"
-"����ä��顢CUPS ��Ƶ�ư����Τ�˺��ʤ���\n"
-"�ʥ��ޥ��: ��service cups restart��)."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ���ɥ쥹�� 192.168.1.20 �Τ褦�����Ϥ��Ʋ�����"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "�ݡ����ֹ�������Ǥ���"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS ������IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "�ݡ���"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "��ư CUPS ����"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "�ǥХ����θ�����Ǥ��ġ�"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "�ݡ��ȤΥƥ���"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "�ץ���ɲ�"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"�ץ�����ꥦ�������ɤؤ���ä������\n"
-"\n"
-"���Υ��������ɤǤϡ����Υޥ����ͥåȥ�����¾�Υޥ���ǻȤ�\n"
-"��������ץ�󥿤��⡼�ȥץ�󥿤򥤥󥹥ȡ��뤷�ޤ���\n"
-"\n"
-"�ץ�������ɬ�פʳƼ�����ˬ�ͤơ��Ƽ�ץ�󥿥ɥ饤�Ф�\n"
-"���Υ��ץ���󡢥ץ����³���������٤�褦�ˤ��ޤ���"
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "��������ץ��"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"�ץ�����ꥦ�������ɤؤ���ä������\n"
-"\n"
-"���Υ��������ɤϡ���³���줿�ץ�󥿤Υ��󥹥ȡ���򤪼��������ޤ���\n"
-"\n"
-"�ץ�󥿤򥳥�ԥ塼���ˤĤʤ����Ÿ�������Ƥ����������������Ǥ�����ּ���"
-"��\n"
-"����å����뤫�����ޤ����ꤷ�����ʤ���� \"����󥻥�\" �򥯥�å����ޤ���\n"
-"\n"
-"�ʤ��������Υ���ԥ塼���ϥץ�󥿼�ư������˥���å��夷�ޤ���\n"
-"��ư���Фʤ��ǥץ������򤹤�ˤϡ��֥ץ�󥿼�ư���Сפ򥪥դˤ��ޤ���\n"
-"�ޤ�printerdrake ����ưŪ�˥�⡼�ȥץ�󥿤򸡽Ф��ʤ���С�\n"
-"�֥������ѡ��ȥ⡼�ɡפ�Ȥä����ꤷ�Ƥ���������"
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "�ץ�󥿼�ư����"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"����ǤȤ��������ޤ����ץ�󥿤Υ��󥹥ȡ�������꤬��λ���ޤ�����\n"
-"\n"
-"���ץꥱ�������Ρְ����ץ��ޥ�ɡʤդĤ��ϡ֥ե�����ץ�˥塼�Ρ�\n"
-"��������Ǥ��ޤ���\n"
-"\n"
-"�ץ�󥿤��ɲá������̾���ѹ����ǥե����������ѻ�ȥ쥤�������ʼ��ʤɡ�"
-"��\n"
-"��������С�Mandrake ����ȥ����륻�󥿡��Ρ֥ϡ��ɥ������פ����\n"
-"�֥ץ�󥿡פ�����Ǥ���������"
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "�ץ�󥿤μ�ư����"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake �ϥ�������ץ�󥿤�ư���ФǤ��ޤ����������Υ����ƥ�Ǥ�\n"
-"�����ƥ��ե꡼�������ơ��ե����륷���ƥ������ޤ������������Ƥ��Τ�ޤ���"
-"�衪\n"
-"\n"
-"�ǡ������˥ץ�󥿤μ�ư���Ф򤷤ޤ�����"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "��ư���Ф򤹤�"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "�ץ�󥿤��ư������"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "%s �򸡽�"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "�ѥ���ݡ��Ⱦ�Υץ�� \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB �ץ�� \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"��������ץ�󥿤����Ĥ���ޤ��󡣼�ư�ǥ��󥹥ȡ��뤹��ˤϡ��ǥХ���̾��\n"
-"�ե�����̾�����ϥ饤�������ޤ� (�ѥ���ݡ��Ȥʤ�: /dev/lp0, /dev/lp1,... "
-"�� LPT1:, LPT2:, ..., ���б����ơ�1���ܤ� USB �ץ��: /dev/usb/lp0, 2����"
-"�� USB �ץ��: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "�ǥХ������ե�����̾�����Ϥ��Ƥ�������"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"��������ץ�󥿤����Ĥ���ޤ���\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"�ͥåȥ���ץ�󥿤Υ��󥹥ȡ���ϡ�OS ���󥹥ȡ����ˤ����Ǥ��ޤ���\n"
-"���󥹥ȡ�����Mandrake ����ȥ����륻�󥿤ǡ֥ϡ��ɥ������פ����\n"
-"�֥ץ�󥿡פ�����Ǥ���������"
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"�ͥåȥ���ץ�󥿤Υ��󥹥ȡ���ˤϡ֥���󥻥�פ򥯥�å�����\n"
-"�֥������ѡ��ȥ⡼�ɡפ��ѹ����Ƥ���ֿ����ץ�󥿤��ɲáפ򥯥�å�\n"
-"���ʤ����Ƥ���������"
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"�ʲ��Υץ�󥿤���ư���Ф���ޤ������⤷���줬���ꤷ������ΤǤʤ���С�\n"
-"���ϹԤˡ��ǥХ���̾/�ե�����̾�����Ϥ��Ƥ�������"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"�ʲ��Υץ�󥿤���ư���Ф���ޤ������⤷���ꤷ������Τ������ˤʤ���С�\n"
-"���ϹԤˡ��ǥХ���̾/�ե�����̾�����Ϥ��Ƥ�������"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"�ʲ��Υץ�󥿤���ư���Ф���ޤ������ץ�󥿤ϴ����˼�ư�����ꤵ��ޤ���\n"
-"���Ф���Ƥ��ʤ��ä��ꡢ������������򤷤�����Сּ�ư����פ�ͭ���ˤ��Ƥ���"
-"������"
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"�ʲ��Υץ�󥿤���ư���Ф���ޤ��������ꤷ�����ץ�󥿤�����Ǥ���������\n"
-"�ץ�󥿤ϴ����˼�ư�����ꤵ��ޤ������Ф���Ƥ��ʤ��ä��ꡢ������������\n"
-"��������Сּ�ư����פ�ͭ���ˤ��Ƥ���������"
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"�ץ�󥿤���³����Ƥ���ݡ��Ȥ����֤������ϹԤ˥ǥХ���̾/�ե�����̾��\n"
-"���Ϥ��Ƥ�������"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "��ǥ�ϤɤΥ��ꥢ��ݡ��ȤˤĤʤ��äƤ��ޤ�����"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(�ѥ���ݡ��Ȥʤ�: /dev/lp0, /dev/lp1,... �� LPT1:, LPT2:, ..., ���б���1��"
-"�ܤ� USB �ץ��: /dev/usb/lp0, 2���ܤ� USB �ץ��: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "�ץ�󥿤��ǥХ��������ϡ�����"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "�ޥ˥奢������"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"���ʤ��Υץ�󥿤ϡ�HP��¿��ǽ�ǥХ��� (OfficeJet, PSC, PhotoSmart, LaserJet "
-"1100/1200/1220/3200/3300 �Υ�����ʤĤ�) �Ǥ���?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "HPOJ �ѥå������Υ��󥹥ȡ�����..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "�ǥХ���������å�����HPOJ �򥤥󥹥ȡ�����..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "SANE �ѥå������Υ��󥹥ȡ�����..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "HP �ޥ����ǽ�ǥХ����ǥ��������"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "�ץ�󥿥ݡ��Ȥ� CUPS �Ѥ�����..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "�ץ�󥿥ǡ����١������ɤ�Ǥ��ޤ�..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "��⡼��lpd�ץ�󥿥��ץ����"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"��⡼�Ȥ� lpd �� �ץ�󥿤�Ȥ��ˤϡ��ץ�󥿥����Ф�\n"
-"�ۥ���̾�ȥ����о�Υץ��̾��ɬ�פˤʤ�ޤ���."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "��⡼�ȥۥ���̾"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "��⡼�ȥץ��̾"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "��⡼�ȥۥ���̾������ޤ���"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "��⡼�ȥץ��̾������ޤ���"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (������ɥ��� 9x/NT) �ץ�󥿤Υ��ץ����"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"SMB �ץ�󥿤�Ȥ��ˤϡ�SMB �ۥ���̾(����TCP/IP �ۥ���̾�Ȥ��̡�)�ȡ�\n"
-"¿ʬ�ץ��ȥ����Ф� IP ���ɥ쥹�����������������ץ�󥿤ζ�ͭ̾��\n"
-"Ŭ�ڤʥ桼��̾���ѥ���ɤ���ӥ�����롼�פξ���ɬ�פˤʤ�ޤ���"
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB�����Хۥ���"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB������IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "������̾"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "������롼��"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "������̾���������Ф�IP�Ϥɤ����Ƥ��פ�ޤ���"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Samba������̾������ޤ���"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Netware �ץ�󥿤Υ��ץ����"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Netware �ץ�󥿤�Ȥ��ˤϡ�NetWare �ۥ���̾(����TCP/IP �ۥ���̾�Ȥϰ㤦��)\n"
-"�ȡ����������������ץ�󥿤Υץ��ȥ��塼̾��Ŭ�ڤʥ桼��̾�����\n"
-"�ѥ���ɤ�ɬ�פˤʤ�ޤ���"
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "�ץ�󥿥�����"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "�������塼��̾��"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP ������̾������ޤ���"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP ���塼̾������ޤ���"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/�����åȥץ�󥿤Υ��ץ����"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"�����åȥץ�󥿤ǰ�������ʤ顢�ץ�󥿤Υۥ���̾�ȡ����ˤ�äƤ�\n"
-"�ݡ����ֹ椬ɬ�פˤʤ�ޤ���HP JetDirect �����ФǤϡ��ݡ����ֹ��\n"
-"�̾�9100�Ǥ������ۤ��Υ����Ф��Ȥޤ��ޤ��Ǥ����ϡ��ɥ������Υޥ˥奢���\n"
-"���ޤ��礦��"
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "�ץ�󥿥ۥ���̾"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "�ץ�󥿥ۥ���̾������ޤ���"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "�ץ�󥿥ǥХ�����URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"�ץ�󥿤򥢥���������Τ�ľ�� URI ����ꤹ�뤳�Ȥ�Ǥ��ޤ���\n"
-"����URI��CUPS���ͤ�Foomatic���ͤǻ��ꤷ�Ƥ���������\n"
-"�ʤ������٤Ƥ�URI�����פ������ס���ǥ��ݡ��Ȥ���Ƥ���櫓����ʤ��Ǥ���"
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "ͭ����URI�����Ϥ��Ƥ���������"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"�ץ�󥿤Ϥ��줾��̾����ɬ�פǤ��ʤ��Ȥ��С�printer�ס�\n"
-"�����������϶���Ǥ⤫�ޤ��ޤ���\n"
-"����ϥ桼���ˤ狼��䤹�����뤿��Τ�ΤǤ���"
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "�ץ�󥿤�̾��"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "�ץ�󥿤�����"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "�ץ�󥿤ξ��"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "�ץ�󥿥ǡ����١����������..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "�ץ�󥿤ε���"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake �ϡ��ץ�󥿤μ�ư���Ф�����줿����̾�ȡ��ץ�󥿤�\n"
-"�ǡ����١����Ȥ���Ӥ��ƺ�Ŭ�ʤ�Τ����Ӥޤ������Ǥ⤳������Ϥޤ����ä�\n"
-"���뤫�⤷��ޤ����ä˥ץ�󥿤��ǡ����١�����ˤޤä����ʤ����ˤ�\n"
-"�褯�ޤ��������ܤ�ޤ���Printerdrake ����������������Τ���ơ�\n"
-"��������С֤��Υ�ǥ��Ȥ��פ򥯥�å����ޤ����ޤ����äƤ�����\n"
-"�ּ�ư�����֡פ�����ǡ������̤����ư�ǥץ�󥿵���̾������Ǥ���������\n"
-"\n"
-"Printerdrake �ϰʲ��Υץ�󥿤򸫤Ĥ��ޤ���:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "���Υ�ǥ��Ȥ�"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "��ư������"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "�ץ�󥿤ε��������"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "�ɤε���Υץ�󥿤�ȤäƤ��ޤ�����"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Printerdrake ���ץ�󥿤ε������������ư���Ф������Τ���Ƥ���������\n"
-"�������뤬�ޤ����ä���ǥ벽�֥ʥޤΥץ�󥿡�Raw Printer)�פ�ؤ���\n"
-"�����顢�������������������õ���Ƥ���������"
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"���ʤ��Υץ�󥿤��ʤ���С��ߴ����Τ���ץ�󥿡ʥץ�󥿤Υޥ˥奢�뤫\n"
-"����ץ�󥿤�����Ǥ���������"
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI win�ץ�󥿤�����"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"OKI �Υ졼��win�ץ�󥿤����ꤷ�褦�Ȥ��Ƥ��ޤ��͡����Υץ�󥿤������ü�"
-"��\n"
-"�ץ��ȥ����Ȥ��Τǡ��ǽ�Υѥ���ݡ��ȤˤĤʤ��ʤ��ȵ�ǽ���ޤ���\n"
-"�⤷�̤Υݡ��Ȥ���³����Ƥ����ꡢ�ץ�󥿥����ФˤĤʤ��äƤ����ꤹ�����"
-"�ϡ�\n"
-"�ƥ��ȥڡ������������ˡ��ǽ�Υѥ���ݡ��ȤˤĤʤ��ʤ����Ƥ���������\n"
-"����ʤ��ȻȤ��ޤ�����³����������̵�뤵��ޤ���"
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark���󥯥����åȤ�����"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Lexmark���󶡤��륤�󥯥����åȥץ�󥿥ɥ饤�Фϡ���������ץ�󥿤���\n"
-"���ݡ��Ȥ��ޤ��󡣥�⡼�ȥޥ����ץ�󥿥����о�Υץ�󥿤ϻȤ��ޤ���\n"
-"�ץ�󥿤��������ݡ��ȤˤĤʤ�����³����Ƥ���ޥ�������ꤷ�Ƥ���������"
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Lexmark ���󥯥����åȤȤ�������ǰ�������ˤϡ�Lexmark(http://www.lexmark."
-"com/) ���󶡤��륤�󥯥����åȥץ�󥿥ɥ饤�Ф�ɬ�פǤ�������ꥫ�����Ȥ�"
-"�Ԥäơ��֥ɥ饤�Сפ򥯥�å����ޤ��礦�����줫�鼫ʬ�ε��������ǡ�OS����"
-"��\"Linux\" �����Ӥޤ����ɥ饤�Ф� RPM �ѥå�������������ե��å����󥹥ȡ���"
-"�ѤΥ����륹����ץȤˤʤäƤ��ޤ�����������ϥ���ե��å��ե���ȥ���ɤ��"
-"��ʤ��Ƥ�Ǥ��ޤ����饤����Ʊ�դΤ��ȤǤ����˥���󥻥뤷�Ƥ�������������"
-"��������إåɤΥ��饤����ȥڡ�����\"lexmarkmaintain\" �ǰ������ơ����Υ�"
-"�������ǥإåɤΥ��饤����Ȥ�Ĵ�����ޤ���"
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"�ץ�󥿤Υǥե��������\n"
-"\n"
-"�ڡ������礭���ȥ��󥯤μ���ʳ���������Τߡˤ����������ꤵ��Ƥ��뤫���"
-"ǧ���ޤ��礦���ʤ���Ķ���ʼ������Ϥ��������֤������뤳�Ȥ�����ޤ���"
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "���ץ���� %s �������Ǥ���"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "���ץ���� %s �Ͽ����Ǥ���"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "���ץ���� %s �ϰϳ��Ǥ�!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"���Υץ�� (\"%s\") ��\n"
-"�ǥե���ȥץ�󥿤ˤ��ޤ�����"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "�ƥ��ȥڡ���"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"�����������ƥ��ȥڡ���������Ǥ���������\n"
-"�����̿��ƥ��ȥڡ����ϡ������ˤ��ʤ���֤������뤳�Ȥ�����ޤ���������ξ�"
-"�ʤ��졼���ץ�󥿤ǤϽ��ϤǤ��ʤ����Ȥ⤢��ޤ���¿���ξ���ɸ��ڡ�������"
-"���Ǥ��������פǤ���"
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "�ƥ��ȥڡ����ʤ�"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "����"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "ɸ��ƥ��ȥڡ���"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "�̤Υƥ��ȥڡ��� (�쥿��)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "�̤Υƥ��ȥڡ��� (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "�̿��ƥ��ȥڡ���"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "�ƥ��ȥڡ�����������ʤ�"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "�ƥ��ȥڡ���������ġ�"
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"�ƥ��ȥڡ�����ץ�󥿥ǡ���������ޤ�����\n"
-"�ץ�󥿤�ư���Ф��ޤǡ�����äȻ��֤�������ޤ���\n"
-"�����Υ��ơ�������\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"�ƥ��ȥڡ�����ץ�󥿥ǡ���������ޤ�����\n"
-"�ץ�󥿤�ư���Ф��ޤǡ�����äȻ��֤�������ޤ���\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "���ޤ�ư���ޤ�������"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "���Υץ��"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"���ޥ�ɥ饤��ʥ����ߥʥ륦����ɥ��ˤ���ե�������������ˤϡ�\n"
-"���ޥ�ɡ�%s <file>�פ�������ե��å������ġ���: ��xpp <file>�פ�\n"
-"��kprinter <file>�פ�Ȥ��ޤ�������ե��å��ġ���ϡ�\n"
-"�ץ������ȥ��ץ����������ñ�ˤ��Ƥ���ޤ���\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"�����������ޥ�ɤϡ�¿���Υ��ץꥱ�������ΰ������������������\n"
-"�ְ������ޥ�ɡץե�����ɤǤ�Ȥ��ޤ��������ξ��ϥե�����̾���פ�ޤ�"
-"��\n"
-"��������ե�����ϥ��ץꥱ������󤫤餯�뤫��Ǥ���\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"��%s�ץ��ޥ�ɤϤޤ�����������֤��Ȥ˥��ץ����������Ѥ������Ƥ���ޤ���\n"
-"���ޥ�ɥ饤��˴�˾��������ɲä�������Ǥ���\n"
-"���Ȥ��С�%s <file>�פȤ������Ǥ��� "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"���ޤΥץ�󥿤ǻȤ��륪�ץ��������򸫤�ˤϡ����ΰ������ɤफ��\n"
-"���뤤�ϡ֥��ץ�������������ץܥ���򥯥�å����ޤ��礦��%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"���ޤΥץ�󥿤ǻȤ���������ץ��������ϰʲ����̤�Ǥ�:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"���ޥ�ɥ饤��ʥ����ߥʥ륦����ɥ��ˤ���ե�������������ˤϡ�\n"
-"���ޥ�ɡ�%s <file>�פ�Ȥ��ޤ���\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"�����������ޥ�ɤϡ�¿���Υ��ץꥱ�������ΰ������������������\n"
-"�ְ������ޥ�ɡץե�����ɤǤ�Ȥ��ޤ��������ξ��ϥե�����̾���פ�ޤ�"
-"��\n"
-"��������ե�����ϥ��ץꥱ������󤫤餯�뤫��Ǥ���\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"���ޤΥץ�󥿤ǻȤ��륪�ץ��������򸫤�ˤϡ��֥��ץ�������������ץܥ�"
-"��򥯥�å����ޤ��礦��"
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"���ޥ�ɥ饤��ʥ����ߥʥ륦����ɥ��ˤ���ե�������������ˤϡ�\n"
-"���ޥ�ɡ�%s <file>�פޤ��ϡ�%s <file>�פ�Ȥ��ޤ���\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"�ޤ����ץ����������������֤ν����ˤϥ���ե��å��Ρ�xpdq�פ�Ȥ��ޤ���\n"
-"�ǥ����ȥå״Ķ��� KDE �ʤ顢�֥ѥ˥å��ܥ���פȤ����������󤬥ǥ����ȥå�"
-"��\n"
-"����Ǥ��礦������򥯥�å�����ȡ���������֤����������˻ߤޤ�ޤ���\n"
-"����Ϥ��Ȥ��л�ͤޤ�ΤȤ��������Ǥ���\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"��%s�פȡ�%s�ץ��ޥ�ɤϤޤ�����������֤��Ȥ˥��ץ���������\n"
-"�Ѥ������Ƥ���ޤ������ޥ�ɥ饤��˴�˾��������ɲä�������Ǥ���\n"
-"���Ȥ��С�%s <file>�פȤ������Ǥ���\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "�Ĥ���"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "�ʲ��ǰ�����/������� \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "�ʲ��Υץ�󥿤ǰ����桧 \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "�ץ�󥿥��ץ�������"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"HP ¿��ǽ�ǥХ�����ư���ꤷ�ơ�������ʤ�Ȥ���褦�ˤ��ޤ���������ǥ��ޥ�"
-"�ɥ饤�󤫤�\"scanimage\"�����Ϥ��뤫 (ʣ���Υ�����ʤ��������\"scanimage "
-"-d hp:%s\" �ǥ�����ʤ����)������ե��å����󥿡��ե�������\"xscanimage\" "
-"�� \"xsane\"��Ȥäƥ�����󤬤Ǥ��ޤ���GIMP��ȤäƤ���ʤ顢\"�ե�����\"/"
-"\"�ɤ߹���\"��˥塼��Ŭ�ڤ���ʬ������Ǥ��ǽ�Ǥ����ܤ����ϡ����ޥ�ɥ饤��"
-"�� \"man scanimage\" �� \"man sane-hp\" �򻲾Ȥ��Ƥ���������\n"
-"\n"
-"���ΥǥХ����Ǥ�\"scannerdrake\" �ϻȤ�ʤ��Ǥ�������!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"HP ¿��ǽ�ǥХ�����ư���ꤷ�ơ�������ʤ�Ȥ���褦�ˤ��ޤ���������ǥ��ޥ�"
-"�ɥ饤�󤫤�\"ptal-hp %s scan ...\"�ǥ�����󤬤Ǥ��ޤ�������ե��å����󥿡�"
-"�ե�������GIMP����Υ������ϡ����ΥǥХ����ǤϤޤ����ݡ��Ȥ���Ƥ��ޤ���"
-"�ܤ�����\"/usr/share/doc/hpoj-0.8/ptal-hp-scan.html\" �򻲾Ȥ��Ƥ���������HP "
-"LaserJet 1100 �� 1200 �ξ��ˤϡ�������ʥ��ץ���󤬥��󥹥ȡ��뤷�Ƥ��ʤ�"
-"�ȥ���Ǥ���\n"
-"\n"
-"���ΥǥХ����Ǥ�\"scannerdrake\" �ϻȤ�ʤ��Ǥ�������!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "�ץ�󥿤ξ�����ɤ�Ǥ��ޤ�..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "�ץ�󥿤�������ư"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"���ס��� %s ���餤�ޤΥ��ס��� %s �ء��ץ�󥿤�����򥳥ԡ��Ǥ��ޤ�������"
-"�ǡ������٤ơʥץ��̾����������ꡢ��³���ࡢ�ǥե���ȤΥ��ץ���������"
-"�Ϥ�����˼���ޤ���������֤ϰ�ư���ޤ��󡣰ʲ�����ͳ�ǡ���ư�Ǥ��ʤ�"
-"���塼�⤢��ޤ���\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS �� Novell �����ФΥץ�󥿤䡢��ͳ�����Υ��ޥ�ɤ˥ǡ���������ץ�󥿤�"
-"���ݡ��Ȥ��ޤ���\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ �ϥ�������ץ�󥿤ȥ�⡼�Ȥ� LPD �ץ�󥿡������å�/TCP �ץ�󥿤�����"
-"�ݡ��Ȥ��ޤ���\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD �� LPRng ��IPP �ץ�󥿤򥵥ݡ��Ȥ��ޤ���\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"����ˤ��Υץ�������\"foomatic-configure\" �Ǻ�äƤ��ʤ����塼�ϰ�ư�Ǥ���"
-"����"
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"�ޤ��᡼�����󶡤� PPD �ե������ͥ��ƥ��֤� CUPS �ɥ饤�Ф����ꤵ�줿�ץ��"
-"���ϰ�ư�Ǥ��ޤ���"
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"��ư�������ץ�󥿤������ \"T��ư\"�򥯥�å����Ƥ���������"
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "�ץ�󥿤��ư���ʤ�"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "��ư"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"\"%s\" �Ȥ����ץ�󥿤Ϥ��Ǥ� %s �β���¸�ߤ��ޤ���\n"
-"��񤭤���ˤ� \"��ư\" �򲡤��Ƥ���������\n"
-"������̾���򥿥��פ��뤫�����Υץ�󥿤�ȤФ����Ȥ�Ǥ��ޤ���"
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "�ץ��̾�ϡ�ʸ���ȿ����ȥ������������ (_)�����Ȥ��ޤ���"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"�ץ�� \"%s\" �Ϥ��Ǥ�¸�ߤ��ޤ���\n"
-"���ޤ�������񤭤��Ƥ��ޤ��ޤ�����"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "�������ץ�󥿤�̾��"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s ��ư��ġ�"
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"���Υǥե���ȥץ�� (\"%s\")���ư���ޤ��������������������ƥ�%s�Ǥ⤳���"
-"�ǥե���ȤΥץ�󥿤ˤ��ޤ�����"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "�ץ�󥿥ǡ���������..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "��⡼�ȥץ�󥿤�����"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "�ͥåȥ����ư��..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "�������ͥåȥ������򤹤�"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "�ͥåȥ����ǽ�����ꤵ��Ƥޤ���"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"��⡼�ȥץ�󥿤�����򤷤ޤ�������ϥͥåȥ�����������β�Ư��ɬ�ܤǤ�"
-"�������ʤ��Υͥåȥ������Ϥ���Ǥ��ޤ��󡣥ͥåȥ������ʤ��ǿʤ�ȡ�"
-"����������Υץ�󥿤ϻȤ��ޤ��󡣤��Ƥɤ��ʤ�ޤ��礦����"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "�ͥåȥ���������ȤФ�����˿ʤ�"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"���󥹥ȡ�����ˤ�ä��ͥåȥ�����꤬��ư�Ǥ��ޤ��󡣵�ư���˥ͥåȥ��"
-"��ͭ���ˤʤäƤ��뤫Ĵ�٤ơ�ɬ�פʤ�Mandrake����ȥ����륻�󥿤Ρ֥ͥåȥ"
-"��&���󥿡��ͥå�/��³�פ���ʬ�������ʤ����Ƥ������������줬����Ǥ��顢Ʊ"
-"����Mandrake����ȥ����륻�󥿤Ρ֥ϡ��ɥ�����/�ץ�󥿡פ���ʬ�ǥץ�󥿤���"
-"��򤷤ޤ��礦��"
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"�ͥåȥ����������������Ƥ��ơ���ư�Ǥ��ޤ���Ǥ������ϡ��ɥ������������"
-"�����å����Ƥ������������줫���⡼�ȥץ�󥿤��������ʤ����Ƥ���������"
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "�ץ�󥿥����ƥ�Ƶ�ư��..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "�⤤"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "���м��ʤۤɹ���"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "���������ƥ�򥻥����ƥ���� %s �ǥ��󥹥ȡ�����"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"���줫�顢���������ƥ� %s �򥻥����ƥ���� %s �Υޥ���˥��󥹥ȡ��뤷��"
-"����\n"
-"\n"
-"���ΰ��������ƥ�ϡ��ǡ����ʥХå����饦��ɤΥץ������ˤ�¹Ԥ��ޤ�������"
-"�ϰ�������֤��Ԥäơ����줬������������ޤ������Υǡ����ϥͥåȥ����ͳ"
-"�ǡ���⡼�ȥޥ��󤫤�⥢�������Ǥ���Τǡ����⤵����ǽ��������ޤ����Ǥ�"
-"���餳�Υ������ƥ����Ǥϡ��ǥե���Ȥǵ�ư����ǡ����Ϥ��������Ǥ���\n"
-"\n"
-"���Υޥ���ǰ���������������ˤ�äƤ����Ǥ��͡�"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "��ư���˰��������ƥ�򥹥�����"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"���������ƥ� (%s) �ϡ��ޥ���ư���˼�ư�������Ȥ��ޤ���\n"
-"\n"
-"�������ƥ�����夲������ˡ���ư�������Ȥ�̵���ˤʤä��Τ��⤷��ޤ���"
-"���������ƥ�ϡ����⤵����ǽ�������뤫��Ǥ���\n"
-"\n"
-"���������ƥ�μ�ư�������Ȥ�⤦����ͭ���ˤ��ޤ�����"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "���󥹥ȡ���Ѥߥ��եȤ�����å���ġ�"
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "LPRng �����ġ�"
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "LPD �����ġ�"
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "�ץ�󥿤Υ��ס��������Ǥ�������"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "�ɤΰ��������ƥ�ʥ��ס���ˤ�Ȥ��ޤ�����"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "�ץ�� \"%s\" ��������..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Foomatic �Υ��󥹥ȡ�����..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "�ץ�󥿥��ץ����"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "PrinterDrake������..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "���ץꥱ��������������..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "����������򤷤ޤ�����"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "���������ƥ�:"
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"�ʲ��Υץ�󥿤����ꤵ��Ƥ��ޤ���������ѹ��������ץ�󥿤���֥륯��å���"
-"�Ƥ����������ǥե���ȥץ�󥿤ˤ����ꡢ���ξ���򸫤��ꡢ��⡼�Ȥ�CUPS ����"
-"�о�Υץ�󥿤� Star Office/OpenOffice.org�ǻȤ���褦�ˤ�����⤽���Ǥ���"
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"�ʲ��Υץ�󥿤����ꤵ��Ƥ��ޤ����ѹ����ǥե���Ȳ�������λ��Ȥˤϡ�\n"
-"���Υץ�󥿤���֥륯��å����ޤ���"
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "�ץ�󥿰��������ʥ�⡼�� CUPS�ץ�󥿤򤹤٤�ɽ��)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "���������ƥ���ѹ�"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "�Ρ��ޥ�⡼��"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "�̤Υץ�󥿤����ꤷ�ޤ�����"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "�ץ��������ѹ�"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"�ץ�� %s\n"
-"���Υץ�󥿤β����ѹ����ޤ�����"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "��졪"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "�ץ����³�μ���"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "�ץ�󥿤�̾�������������"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "�ץ�󥿤Υ᡼����������ɥ饤��"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "�ץ�󥿤Υ᡼����������"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "���Υץ�󥿤�ǥե���Ȥˤ���"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "���Υץ�󥿤� Star Office/OpenOffice.org ���ɲ�"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "���Υץ�󥿤� Star Office/OpenOffice.org ������"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "�ƥ��ȥڡ�������"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "���Υץ�󥿤λȤ�����Ĵ�٤�"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "�ץ�󥿺��"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "�Ť��ץ�� \"%s\" ������..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "�ǥե���ȥץ��"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "�ץ�� %s ���ǥե���ȥץ�󥿤ˤʤ�ޤ�����"
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "�ץ�󥿤� Star Office/OpenOffice.org ���ɲ���"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "�ץ�� %s �� Star Office/OpenOffice.org ���ɲä��ޤ�����"
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "�ץ�� %s �� Star Office/OpenOffice.org ���ɲäǤ��ޤ���Ǥ�����"
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "�ץ�󥿤� Star Office/OpenOffice.org ��������"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "�ץ�� %s �� Star Office/OpenOffice.org ���������ޤ�����"
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "�ץ�� %s �� Star Office/OpenOffice.org �������Ǥ��ޤ���Ǥ�����"
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "�ץ�� %s �������˺�����ޤ�����"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "�ץ�� \"%s\" ������..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "�ץ�����������"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"�ץ���������桼�ƥ���ƥ��ؤ���ä��㤤�ޤ�����\n"
-"\n"
-"�����Ǥ� http �� ftp �Υץ����������ꤷ�ޤ���\n"
-"���������ѥ���ɤ⡢ɬ�פʤ�����Ǥ��ޤ���\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"http �ץ�������������Ϥ��Ƥ�������\n"
-"http proxy��Ȥ�ʤ��ʤ����ˤ��Ƥ����Ƥ�������"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "�ݡ���"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url �� http://... �ǤϤ��ޤ�ޤ�"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "�ݡ����ֹ�Ͽ����Ǥ���"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"ftp �ץ�������������Ϥ��Ƥ�������\n"
-"ftp proxy��Ȥ�ʤ��ʤ����ˤ��Ƥ����Ƥ�������"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url �� ftp://... �ǤϤ��ޤ�ޤ�"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"�ץ������Υ�������̾�ȥѥ���ɤ���������Ϥ��ޤ���\n"
-"��������/�ѥ���ɤ��ʤ���ж���ΤޤޤǤ�"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "��������"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "�ѥ����"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "�ѥ���ɤ�⤦��������Ƥ�������"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "�ѥ���ɤ����פ��ޤ��󡣤⤦��������Ƥ���������"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "�ե����ޥåȺѤߤ� RAID md%d �ˤϥѡ��ƥ��������ɲäǤ��ޤ���"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "%s �ե����뤬�񤭹���ޤ���"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid �˼���"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid �˼��� (raidtools �����äƤʤ��Τ���?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "RAID ��٥� %d �Τ���ˤϥѡ��ƥ��������­�Ǥ�\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA (���Linux ������ɥ������ƥ�����) ������ɥ����ƥ൯ư"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron �����Ū�ʥ��ޥ�ɥ������塼��Ǥ���"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd �ϥХåƥ꡼�ξ��֤�Ĵ�٤Ƥ����syslog��ͳ�ǵ�Ͽ���ޤ���\n"
-"���Ӥ��ʤ��ʤä��Ȥ��˥ޥ���򥷥�åȥ����󤹤�Τˤ�Ȥ��ޤ���"
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"at���ޥ�ɤǥ������塼�뤵�줿���ޥ�ɤ�at�¹Ի��˻��ꤷ�����֤�\n"
-"�¹Ԥ��ơ�ʿ����٤��㤤�Ȥ��˥Хå����ޥ�ɤ�¹Ԥ��ޤ���"
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron��UNIXɸ��Υץ������ǡ��桼������Υץ����������Ū��\n"
-"�¹Ԥ��ޤ���vixie cron��ɸ���UNIX cron�˹��٤ʥ������ƥ���\n"
-"���Ϥ����ꥪ�ץ����ʤɤε�ǽ���ɲä��Ƥ��ޤ���"
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ��Midnight Commander�ʤɥƥ����ȥ١�����Linux���եȤǥޥ�����\n"
-"�Ȥ���褦�ˤ��ޤ����ޥ����ˤ�륳�󥽡���ǤΥ��åȡ��ڡ�����\n"
-"�䡢�ݥåץ��åץ�˥塼��Ȥ��ޤ���"
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake �ϥϡ��ɥ�������õ���ơ���ǽ�ʤ鿷�����ϡ��ɥ��������ѹ�����\n"
-"�ϡ��ɥ�����������򤷤ޤ���"
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache��World Wide Web�����Фǡ�HTML �ե������CGI�θ����˻Ȥ��ޤ���"
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"���󥿡��ͥåȡ������ѡ������С��ǡ���� (�̾�inetd) �ϡ�ɬ�פ�\n"
-"�����Ƥ���¾�Ƽ磻�󥿡��ͥåȥ����ӥ��򳫻Ϥ��ޤ���telnet��ftp��\n"
-"rsh��rlogin�ʤɤΥ����ӥ����Ϥ�ô�����ޤ���inetd��̵���ˤ���ȡ�\n"
-"���������Ƽ掠���ӥ����٤Ƥ�̵���ˤʤ�ޤ���"
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"�ͥåȥ�����⤫��ޥ�����뤿��Υե����������������\n"
-"���ꤹ��ˤϡ�Linux �����ͥ�2.2 �Υѥ��åȥե��륿��ư���ޤ���"
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"���Υѥå������ϡ�/etc/sysconfig/keyboard�������ꤷ�������ܡ��ɥޥåפ�\n"
-"�����ɤ��ޤ��������kbdconfig�桼�ƥ���ƥ���Ȥä����ꤷ�ޤ����̾��\n"
-"ͭ���ˤ��Ƥ����ޤ��礦��"
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"/usr/include/linux/{autoconf,version}.h �Ѥ�\n"
-"/boot �Υ����ͥ�إå�����������ޤ�"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "��ư���˥ϡ��ɥ������μ�ư���Ф�����򤹤롣"
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf �ϤȤ��ɤ��������ƥ�����ݻ��Τ���˵�ư����\n"
-"�Ƽ��Ȥ򤷤ޤ���"
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd �ϥץ�󥿥ǡ����ǡ�lpr��ư���ɬ�פǤ�������Ū��\n"
-"�ϥץ�󥿤˰�������֤򿶤�ʬ���륵���ФǤ���"
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux �С�����륵���Фϡ�����ǽ�Ǥ��ĤǤ�Ȥ��륵���Ф�\n"
-"���ۤ˻Ȥ��ޤ���"
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) �ϡ�IP���ɥ쥹�ȥۥ���̾���ӤĤ��뤿��Υɥᥤ��̾������"
-"��Domain Name Server, DNS) �Ǥ���"
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"�ͥåȥ���ե����륷���ƥ� (NFS), SMB (LanManager/Windows),\n"
-"NCP (NetWare) �ޥ���ȥݥ���Ȥ򤹤٤ƥޥ���ȡ�����ޥ���Ȥ��ޤ���"
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"��ư����ͭ���ˤ�������Υͥåȥ�����󥿡��ե������򤹤٤ơ�\n"
-"ͭ����̵���ˤ��ޤ���"
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ��TCP/IP�ͥåȥ����ǥե����붦ͭ�򤹤�Τˤ褯�Ȥ��ץ��ȥ���\n"
-"�Ǥ������Υ����ӥ��� NFS �����е�ǽ���󶡤��ޤ�������ˤ�/etc/exports \n"
-"�ե������Ȥ��ޤ���"
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ��TCP/IP�ͥåȥ����ǥե����붦ͭ�򤹤�Τˤ褯�Ȥ��ץ��ȥ���\n"
-"�Ǥ������Υ����ӥ��� NFS �ե�������å���ǽ���󶡤��ޤ���"
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr "��ư���˥��󥽡���� XFree �Ǽ�ưŪ�� numlock ��ͭ���ˤ��롣"
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w �ߴ���win�ץ�󥿤򥵥ݡ���"
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ���ݡ��Ȥϡ���åץȥåץ���ԥ塼����Ethernet���ǥ�\n"
-"�ʤɤ�PC�����ɤ�Ȥ���褦�ˤ��뤿��Τ�ΤǤ������ꤹ��ޤ�\n"
-"�ϵ�ư���ʤ��Τǡ�ɬ�פʤ��ޥ��������Ƥ��äƤ�����Ǥ���"
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper �� RPC ��³��������ޤ��������NFS��NIS�ʤɤΥץ��ȥ����\n"
-"���Ѥ���ޤ���RPC������Ȥ��ץ��ȥ���Υ����ФȤʤ�ޥ���Ǥϡ�����\n"
-"portmap �����Ф�ư���Ƥ���ɬ�פ�����ޤ���"
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix �ϥ᡼��ž������������ȤǤ� (MTA) �Ǥ�������ϡ��ޥ���֤ǥ᡼����"
-"��Ȥꤹ��ץ������Ǥ���"
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"���ȯ���μ���夲�뤿��ˡ������ƥ�Υ���ȥ��ԡ��ס������¸��\n"
-"���褵���ޤ���"
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Oracle �ʤɤΥ��ץꥱ�������ǻȤ���褦�ˡ��֥��å��ǥХ���\n"
-"���Ȥ��Хϡ��ɥɥ饤�֥ѡ��ƥ������ˤ����ǥХ����˳��Ĥ��ޤ���"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed �ǡ����ϡ�RIP�ץ��ȥ����Ȥä�IP�ơ��֥�μ�ư������\n"
-"��ǽ�ˤ��ޤ���RIP �Ͼ����ϥͥåȥ���Ǥ������Ǥ褯�Ȥ��ޤ�����\n"
-"�ͥåȥ����ʣ���ˤʤäƤ���ȡ�����Ǥ��Խ�ʬ�Ǥ���"
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat�ץ��ȥ����Ȥ��ȡ��ͥåȥ����Υ桼���������Υͥåȥ��\n"
-"����³�����ޥ���Τ��٤ƤˤĤ��ơ���ǽ��ɸ��������褦�ˤʤ�ޤ���"
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers�ץ��ȥ���Ǥϡ��ͥåȥ����Υ桼��������������ۤ��Υޥ���\n"
-"�˥������󤷤Ƥ���ͤ����򸫤뤳�Ȥ��Ǥ��ޤ���"
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho �ǡ�������äƤ���ޥ���Ǥϡ����Υޥ���˥����������\n"
-"�桼��������rwho�ץ��ȥ����ͳ�Ǹ����ޤ� (finger�˻��Ƥ��ޤ�)��"
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "������ɥ����ƥ��ư"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog �ϡ��Ƽ�Υǡ���󤬤�����ʥ����ե�����˥�å�������Ͽ\n"
-"����Ȥ��˻Ȥ��ޤ������äȵ�ư���Ƥ����ۤ��������Ǥ��礦��"
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "usb �ǥХ����ѤΥɥ饤�Ф��ɤ߹��ߤޤ��礦��"
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "X�ե���ȥ����Ф򳫻Ϥ��ޤ���XFree ���Ѥˤ�ɬ�ܡˡ�"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "��ư���˼�ưŪ�ˤ��������륵���ӥ�������Ǥ�������"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "����"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "���󥿡��ͥå�"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "�ե����붦ͭ"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "�����ƥ�"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "��⡼�ȴ���"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "�ǡ����١���������"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "�����ӥ�: %d �� %d �Ѥ˵�ư�����Τ���Ͽ"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "�����ӥ�"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "�¹���"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "�����"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "�����ӥ��ȥǡ����"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"���Υ����ӥ��ˤĤ��Ƥϡ��ɲä�\n"
-"����Ϥ���ޤ��󡣤����ʤ�����"
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "��ư����ư��"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "����"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "���"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Mandrake Linux 8.2�����Ӥ��������ޤ��Ƥ��꤬�Ȥ��������ޤ�"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "�����ץ󥽡����������ؤ褦����"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"MandrakeSoft �������ϡ��ե꡼���եȤθ����˺���������ΤǤ���"
-"���ʤ��ο����ڥ졼�ƥ��󥰥����ƥ�ϡ��������� Linux ���ߥ�˥ƥ���"
-"��붦Ʊ��Ȥ����̤ʤΤǤ���"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "�ե꡼���եȤ������˻��ä��ޤ��礦"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"�����ץ󥽡������ߥ�˥ƥ��Τ��Ȥ��ä��Τäơ����ΰ���ˤʤ�ޤ��礦��"
-"�֥��ߥ�˥ƥ��ץ����֥ڡ����ˤ���Ƽ�ե������˻��ä��ơ��ؤӡ�������"
-"�ۤ��ο͡�������ޤ��礦��"
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "���󥿡��ͥåȤȥ�å�����"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 �ϥ��󥿡��ͥåȤ��󶡤����Τ��٤Ƥ˥��������Ǥ���"
-"�ǹ�Υ��եȤ��ꤽ�����Ƥ��ޤ��������֤򥵡��ե��󤷤ơ�ư��򸫤�ʤ�"
-"Mozilla �� Konqueror �����뤷���᡼����������ȸĿ;��������"
-"Evolution �� Kmail, ����¾�ʤ�Ǥ⤢��ޤ���"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "�ޥ����ǥ����Ȳ���"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 �ϡ��ޥ����ǥ�����ǽ��˸¤ޤǻȤ��ݤ��ޤ���"
-"�ǿ����եȤDz��ڤ䲻���ե�����κ����򤷤��ꡢ������̿�����������ꡢ"
-"�ƥ�Ӥ򸫤��ꡢ����¾�ʤ�Ǥ�Ǥ��ޤ���"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "��ȯ��"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 �ϵ�ˤγ�ȯ�ץ�åȥۡ���Ǥ���"
-"GNU gcc ����ѥ����Ϥ��ᡢ�ǹ�Υ����ץ󥽡���"
-"��ȯ�Ķ��ΰ��Ϥ�ȯ�����ޤ��礦��"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake ����ȥ����륻�󥿡�"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Mandrake Linux 8.2 ����ȥ����륻�󥿡��ϡ�Mandrake �����ƥ��"
-"�������ޥ���������Τ���Υ�󥹥ȥåץѥͥ뽸�Ǥ���"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "�桼�����󥿡��ե�����"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 �ˤ�11����Υ���ե��å��ǥ����ȥå״Ķ���"
-"������ɥ��ޥ͡����㤬���äƤ��ޤ���GNOME 1.4, KDE 2.2.2,"
-" Window Maker 0.8 �ʤɤǤ���"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "�����Х��ե�"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"�ޥ�����ۤ�ο�����å���������ǡ����ʤ��Υޥ����"
-"���Ϥʥ����Ф����Ѥ�ꡪ�����֥����С��᡼�롢�ե��������������롢"
-"�롼�����ե����륵���Ф˰��������Фʤɤ������Ǥ���"
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "������"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 �ˤϡ��ǹ�Υ����ץ󥽡��������ब�Ĥ��Ƥ��ޤ���"
-"���������ɷ�����������󷿡������ɥ����ࡢ���ݡ��ġ���ά������..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Linux ���ڤˤ��Ф䤯��̵�����ٶ��������Ǥ����� MandrakeSoft ��"
-"̵����Linux �ȥ졼�˥󥰤䡢�����߶�������å�������ˡ���󶡤��Ƥ��ޤ���"
-"���줬MandrakeCampus -- ���ҤΥ���饤�󸦽����󥿡��Ǥ���"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "Mandrake�������ѡ���"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Linux ���ߥ�˥ƥ��� MandrakeSoft ����ι���ʥ��ݡ��Ȥ������������ޤ���"
-"�����Ƥ��ʤ����ڶ������ Linux �ͤʤ顢�֥������ѡ��ȡפˤʤäƥ��ݡ�����"
-"�����֥����Ȥ��μ���ͭ���Ƥ���������"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "Mandrake ���󥵥�ƥ���"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"������ IT �ץ��������ȤˤĤ��ơ����ҤΥ��󥵥륿��Ȥ������׷��ʬ�Ϥ���"
-"�������ಽ��������塼��������Ƥ������ޤ���Linux �٥�����Ȥ��Ƥ�"
-" MandrakeSoft ������ʷи����������ơ����ʤ��Υӥ��ͥ��ȿ�������"
-"���� IT���ذƤ��󶡤������ޤ���"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"�ե��󥸤�Linux ����塼�����䡢���ʤ�Ƽ異���ƥ���ò����䤬��"
-"���ҤΥ���饤��Ź�Ǽ������ޤ���"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"MandrakeSoft �����祵���ӥ������侦�ʤˤĤ��ƾܤ����ϰʲ���"
-"�����֥ڡ����򻲾Ȥ��Ƥ�������:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "�ѥå������Υ��󥹥ȡ�����..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"�ѡ��ƥ������ơ��֥뤬�ɤ�ޤ��󡤲���Ƥ���褦�Ǥ�:(\n"
-"�����ʥѡ��ƥ��������������褦�Ȥ��ޤ�"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "���顼��"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "ɬ�פʲ����ե����� %s �����Ĥ���ޤ���"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "��ư���󥹥ȡ�������"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"���줫�鼫ư���󥹥ȡ���ե��åԡ������ꤷ�ޤ������ε�ǽ�Ϥ������������ʤΤ�"
-"���Ť˻ȤäƤ���������\n"
-"\n"
-"���ε�ǽ�Ǥϡ����Υ���ԥ塼���Ǥ�ä����󥹥ȡ�����̤Υޥ���ǺƸ��Ǥ���"
-"�����������Ȥ��ɤ��ץ���ץȤ��Фơ��ͤ��ѹ��Ǥ��ޤ���\n"
-"\n"
-"�����Ф�����ˤ��ˤϡ��ѡ��ƥ�������ڤ�ȥե����ޥåȤϼ�ư�����ƤϤ�����"
-"���󡣤ɤ�ʥѡ��ƥ�����������ˤ������Ǥ⤽���Ǥ���\n"
-"\n"
-"³���ޤ�����"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "��ư���ƥå�����"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"�ƥ��ƥåפǡ����ʤ��Υ��󥹥ȡ����Ʊ���ˤ��뤫����ư���ꤹ�뤫�����Ӥޤ���"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"����ä��㤤�ޤ���\n"
-"\n"
-"��ư���󥹥ȡ���Υѥ�᡼��������ɽ������Ƥ��ޤ�"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "����ǤȤ��������ޤ���"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"�ե��åԡ�������������ޤ�����\n"
-"����ǥ��󥹥ȡ��뤬�Ƹ��Ǥ��ޤ���"
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "��ư���󥹥ȡ���"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "�����ƥ��ɲ�"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "�Ǹ�Υ����ƥ����"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup ��� \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup �ǡ�������\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup �ܺ����\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "�ʹԾ���"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "�����ƥ�ե�����ΥХå����å�..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "�ϡ��ɥǥ������ΥХå����åץե�����..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "�桼���ե�����ΥХå����å�..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "�ϡ��ɥǥ������Хå����åפοʹ�..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "¾�Υե������Хå����å�..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"FTP ������ե�����Υꥹ��: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP ��³�Υȥ�֥�: FTP�ǥХå����åץե����������ޤ���Ǥ�����\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) �᡼��������˥��顼��\n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "�ե����������"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "�ե������ǥ��쥯�ȥ������ǡ��ɲáפ򥯥�å����ޤ�"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"ɬ�פʥ��ץ����˥����å���Ĥ��Ƥ���������\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"���Υ��ץ����� /etc �ǥ��쥯�ȥ�Υե�����򤹤٤ƥХå����åס������Ǥ���"
-"����\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "�����ƥ�ե�����ΥХå����åס�/etc�ǥ��쥯�ȥ�)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "���󥯥��󥿥�Хå����åסʸŤ��Хå����åפϻĤ�)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "���ץե����� (passwd, group, fstab) �ϴޤ�ʤ�"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"���Υ��ץ����Ǥϡ������ʥС������� /etc �ǥ��쥯�ȥ��\n"
-"�����Ǥ��ޤ���"
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "�Хå����åפ˴ޤ᤿���桼������������Dz�����"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "�֥饦���Υ���å���ϴޤ�ʤ�"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "���󥯥��󥿥�Хå����åסʸŤ��Хå����åפϻĤ�)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "����������"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "�桼��̾"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "�Хå����åפ� FTP ��³�����"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "�ۥ���̾�� IP �����Ϥ��Ƥ���������"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"���Υۥ��Ⱦ�Ǥ��Υǥ��쥯�ȥ��\n"
-"�Хå����åפ���¸���ޤ�����"
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "��������̾�����Ϥ��Ƥ�������"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "�ѥ���ɤ����Ϥ��Ƥ�������"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "���Υѥ���ɤ򵭲�����"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP ��³"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "�����奢��³"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "CD/DVDROM �˥Хå����å�"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "CD ���ڡ���������Ǥ�������"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "CDRW��ȤäƤ�����ϥ����å����Ƥ�������"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "�ޤ� CDRW ��õ����ˤϤ����򥯥�å�"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"CD �˵�ư�Ѥ�boot��ޤ��ʤ�\n"
-"�����å����Ƥ���������"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"CD �饤�����ΥǥХ���̾�����Ϥ��Ƥ�������\n"
-"��: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "�ơ��פ˥Хå����å�"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "�Хå����å��ѥǥХ���̾�����Ϥ��Ƥ�������"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Drakbackup�˵��������祵������\n"
-"���Ϥ��Ƥ�������"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "��¸����ǥ��쥯�ȥ�����Ϥ��Ƥ�������:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "�Хå����åץե�����Υ���������Ȥ�"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "�ͥåȥ��"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "�ϡ��ɥɥ饤�� / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "�����"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "����"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "�轵"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "���"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "�ǡ�����Ȥ�"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "�Хå����åפδֳ֤�����Ǥ�������"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"�Хå����åפΥ�ǥ�����\n"
-"����Ǥ��������͡�"
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "�ǡ����ǥϡ��ɥɥ饤�֤�Ȥ�"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "�ǡ����� FTP ��Ȥ�"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "�����ӥ��� cron �ǡ���󤬴ޤޤ�Ƥ��뤳�Ȥ��ǧ���Ƥ�������"
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "�Хå����å�������᡼��������: "
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "����"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "������"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "����"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "����¾���ץ����"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup ����"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "�Хå����å��������Dz�����"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "�ϡ��ɥɥ饤�֤�"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "�ͥåȥ����ͳ��"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "�Хå����åפ�������Τ�����Dz�����"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "�����ƥ��Хå����å�"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "�桼����Хå����å�"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "�桼�����ư������"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"�Хå����å׸�: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- �����ƥ�ե�����:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- �桼���ե�����:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- ����¾�ե�����:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- �ϡ��ɥɥ饤�־����¸�ѥ� : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- FTP �Ǥ���¸��ۥ��� : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t �桼��̾: %s\n"
-"\t\t �ѥ�: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- ���ץ����:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\t�����ƥ�ե�����ϴޤ�ʤ�\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\t�Хå����åפ� tar �� bzip2�����\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\t�Хå����åפ� tar �� gzip�����\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- �ǡ���� (%s) ���ޤ��� :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-�ϡ��ɥɥ饤�֡�\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-�ͥåȥ���� FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-�ͥåȥ���� SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "���꤬����ޤ��󡣥��������ɤ����򥯥�å����Ƥ�������\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"��������ǡ����ΰ���:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"����Ƥ���ǡ�������:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "����˥����å���Ϥ�����������Ƥ���������"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "�Хå����åץե����뤬����Ƥ��ޤ�"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          ���򤷤��ǡ����Ϥ��٤�          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          %s �����������ޤ���      "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         ��������       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "¾�Υե����������ˤ�OK��"
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "��������桼���ΰ����ʳƥ桼���κǿ������դ��������פǤ���"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "�����ƥ�ե�����ΥХå����å״���:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "�����������դ����򤷤Ƥ�������"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "�Хå����åפ˥ϡ��ɥǥ����������"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "�ϡ��ɥǥ�����������������"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "�Хå����åפ���¸�ǥ��쥯�ȥ�����Ϥ��Ƥ�������"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "�������Υ�ǥ��������Ӥʤ����Ƥ�������"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "����¾��ǥ���"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "�����ƥ�����"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "�桼������"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "����¾�ե����������"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "�����ѥ������֡�/�ʳ�)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "�������˿����Хå����åסʥ��󥯥��󥿥�Хå����åפΤߡ�"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "�������˥桼���ǥ��쥯�ȥ����"
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "���Хå����åפ�����"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "������������"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "�إ��"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "��ɤ�"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "��¸"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "�Хå����å׹���"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "����"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "��"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"��������ˤϥХå����åפ�ޤ����ۤ��Ƥ�������...\n"
-"���뤤����¸��ѥ����������Ǥ�����"
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"�᡼���������顼\n"
-"  ���᡼��������Ǥ��ޤ���\n"
-"  sendmail�����ꤷ�Ƥ�������"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "���󥹥ȡ��뤹��ѥå���������"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"FTP�ǤΥե�����ž����˥��顼.\n"
-"FTP �����ʤ����Ƥ�������."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "�����ǡ���������Ǥ��������͡�"
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "�Хå����å��ѥ�ǥ���������Ǥ��������͡�"
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "�Хå����åפ���ǡ���������Ǥ�������..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"����ե����뤬���Ĥ���ޤ���\n"
-"���������ɤ����򥯥�å����Ƥ���������"
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "�ޤ���ȯ��...�ԤäƤƤ���������"
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "�����ƥ�ե������Хå����å�"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "�桼���ե������Хå����å�"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "����¾�ե������Хå����å�"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "���ΤοʹԾ���"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "FTP�ǥե�����������"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "�ե�����������..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "CDROM�˴ޤ��ǡ�������"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "CD�饤������®�٤����Ϥ��Ƥ�������"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "CD�饤���ΥǥХ���̾�����ϡ���: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "���󥹥ȡ��뤷�����ѥå�����������Dz�����"
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "����ե����뤫�麣�����Хå����å�"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "�Хå����å�����򸫤�"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "��������������"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "�������"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "�������ѥå����å�"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"���ץ���������:\n"
-"\n"
-" ���Υ��ƥåפǤϡ�Drakbackup �ǰʲ����ѹ��Ǥ��ޤ�:\n"
-"\n"
-" - ���̥⡼��:\n"
-"    \n"
-"      bzip2 ���̤����٤С�����Ψ�� gzip ���⤯\n"
-"      �ʤ�ޤ� ( 2-10 %�ۤɲ���).\n"
-"      �ǥե���ȤǤ�̵���ˤ��Ƥ���ޤ������̤ˤ�����\n"
-"      ���֤������뤫��Ǥ� ( 10������).\n"
-" \n"
-" - �����⡼��:\n"
-"\n"
-"      ���Υ��ץ����ϥХå����åפ򹹿����Ƥ���ޤ�����\n"
-"      �¤Ϥ��ޤ���ˤ����ޤ��󡣹�������Ȥ��Хå����åפ�\n"
-"      �虜�虜Ÿ�����ʤ��ȥ��������Ǥ���\n"
-"      \n"
-" - .backupignore �ʥХå����å�̵��˥⡼��:\n"
-"\n"
-"      cvs ��Ʊ���褦�ˡ�Drakbackup �� �ƥǥ��쥯�ȥ��\n"
-"      .backupignore �ե�����˵��Ҥ��줿��Τ�̵�뤷�ޤ���\n"
-"      ��: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" �᡼��������ΰ����Υ��顼�ϡ�postfix�����꤬\n"
-" �ޤ����äƤ��뤻���Ǥ��������ľ���ˤϡ�\n"
-" /etc/postfix/main.cf�� myhostname �� mydomain �����ꤷ�ޤ���\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"���ץ���������:\n"
-"\n"
-" - �����ƥ�ե�����ΥХå����å�:\n"
-"       \n"
-"\t���Υ��ץ����ϡ�����ե����뤬��¸����Ƥ���\n"
-"\t /etc �ǥ��쥯�ȥ��Хå����åפ��ޤ����������ˤ�\n"
-"\t�ʲ��Υե�������񤭤��ʤ��褦�����դ��Ƥ�������:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - �桼���ե�����ΥХå����å�: \n"
-"\n"
-"\t���Υ��ץ����ϡ��Хå����åפ������桼�������Ӥޤ���\n"
-"\t�ǥ���������Τ��ᡢ�����֥֥饦���Υ���å���ϴޤ�ʤ�\n"
-"\t�褦�ˤ��ޤ��礦��\n"
-"\n"
-" - ����¾�ե������Хå����å�: \n"
-"\n"
-"\t��¸�������ǡ����򤵤���ɲä��륪�ץ����Ǥ���\n"
-"\t��������֤ȡ����󥯥��󥿥�Хå����åפ�\n"
-"\t���٤ޤ���\t\t\n"
-" \n"
-" - ���󥯥��󥿥�Хå����å�:\n"
-"\n"
-"\t����ϥХå����å׺Ƕ��Υ��ץ����Ǥ���\n"
-"\t�ǽ�ΥХå����åפǤ����ǡ������Хå����åפ��졢\n"
-"\t���θ�ΥХå����åפǤ��ѹ����줿��Τ�����\n"
-"\t��¸����ޤ���\n"
-"\t��������������Ȥ��ˤϡ����������Υǡ���������\n"
-"\t�Ǥ��ޤ���\n"
-"\t���Υ��ץ��������Фʤ��ȡ��Ť��Хå����åפ�\n"
-"\t���������ޤ���    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"����������:\n"
-" \n"
-"�Ȥ���ΤϺǿ��ǡ��������Ǥ������󥯥��󥿥�Хå����åפǤ�\n"
-"��������Τ����˰�ĤŤ��������ʤ���Фʤ�ʤ�����Ǥ���\n"
-"\n"
-"�������äơ�����桼���������������ʤ���С����οͤΥ����å�\n"
-"�ܥå����򤹤٤ƤϤ����Ƥ���������\n"
-"\n"
-"����ʤ��Ȥ�����ΰ�Ĥ�������٤ޤ���\n"
-"\n"
-" - ���󥯥��󥿥�Хå����å�:\n"
-"\n"
-"\t����ϥХå����å׺Ƕ��Υ��ץ����Ǥ���\n"
-"\t�ǽ�ΥХå����åפǤ����ǡ������Хå����åפ��졢\n"
-"\t���θ�ΥХå����åפǤ��ѹ����줿��Τ�����\n"
-"\t��¸����ޤ���\n"
-"\t��������������Ȥ��ˤϡ����������Υǡ���������\n"
-"\t�Ǥ��ޤ���\n"
-"\t���Υ��ץ��������Фʤ��ȡ��Ť��Хå����åפ�\n"
-"\t���������ޤ���    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" ���Υץ������ϥե꡼���եȥ������Ǥ���Free Software Foundation��\n"
-" ȯ�Ԥ��� GNU ���̶�ͭ�饤���󥹤ΥС������2�ʹߤξ��˽��ä�\n"
-" �����ۡ����Ѥ��Ǥ��ޤ���\n"
-"\n"
-" ���Υץ������ϡ����Ω�Ĥ٤����ۤ���ƤϤ��ޤ�����\n"
-" �ޤä�����̵�ݾڤǤ����������䡢������Ū�ؤ�Ŭ�����ˤĤ���\n"
-" ����Ū���ż�Ū����鷺���ڤ��ݾڤ�Ԥ��ޤ��󡣾ܺ٤�\n"
-" GNU ���̶�ͭ�饤���󥹤򻲾Ȥ��Ƥ���������\n"
-"\n"
-" GNU ���̶�ͭ�饤���󥹤����Υץ������ˤ���°���Ƥ����Ϥ�\n"
-" �Ǥ�����°���Ƥ��ʤ����ˤϡ��ʲ���Ϣ���������ꤷ�Ƥ���������\n"
-" Free Software Foundation, Inc., 59 Temple Place - Suite 330, \n"
-" Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"����:\n"
-"\n"
-"  Drakbackup �ϥ����ƥ�ΥХå����åפ˻Ȥ��ޤ���\n"
-"  ����˱����ơ��Хå����åץե����뤬���٤ޤ�: \n"
-"\t- �����ƥ�ե�����\n"
-"\t- �桼���ե�����\n"
-"\t- ����¾�ե�����\n"
-"\t���뤤���������ƥ�䡢����¾�����ƥ�ʥ�����ɥ���\n"
-"\t�ѡ��ƥ������ˤ�Хå����åפǤ��ޤ���\n"
-"\n"
-"  Drakbackup �Ǥϡ��ʲ��Υ�ǥ����˥Хå����åפ��Ǥ��ޤ�:\n"
-"\t- �ϡ��ɥɥ饤��.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (autoboot, �쥹���塼����ư���󥹥ȡ�����).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- �ơ���\n"
-"\n"
-"  Drakbackup �Ǥϡ�¾�Υǥ��쥯�ȥ������Ǥ�����\n"
-"  �����ƥ�������Ǥ��ޤ���\n"
-"\n"
-"  �ǥե���ȤǤϤ��٤ƤΥХå����åפ�\n"
-"  /var/lib/drakbackup �ǥ��쥯�ȥ����¸����ޤ���\n"
-"\n"
-"  ����ե�����:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"���������:\n"
-"  \n"
-"  �������ƥåפǤ� DrakBackup �Ϥ�ȤΥǥ��쥯�ȥ��\n"
-"  ������ơ����٤ƤΥХå����åץե����뤬�������ɤ���\n"
-"  �Τ���ޤ��������������ˡ����λ����Υ����ƥ��Хå�\n"
-"  ���åפ��Ƥ����ޤ��礦��\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"���ץ��������:\n"
-"\n"
-"ftp �Хå����åפ�Ȥ��Ȥ������դ��ޤ��礦�������Ф�������\n"
-"�ΤϹ��ۺѤߤΥХå����åפ����Ǥ����������äơ������Ф�����\n"
-"���ˡ��ޤ��ϡ��ɥɥ饤�־�˥Хå����å׹��ۤ�ɬ�פˤʤ�ޤ���\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"�Хå����å�����������:\n"
-"\n"
-"�������ƥå���ˡ�Drakbackup ����������Ω�äƤ��٤Ƥ�\n"
-"�Хå����åץե����������å����ޤ���\n"
-"������Ϥ�����ˡ�Drakbackup �Ϻ��Υǥ��쥯�ȥ����\n"
-"����Τǡ����ޤΥǡ����������ä��ޤ����Ǥ����顢�Хå�\n"
-"���åץǡ����Υե�����ϼ�Dz��Ѥ��ʤ��ۤ��������Ǥ���\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"  Drakbackup �ϥ����ƥ�ΥХå����åפ˻Ȥ��ޤ���\n"
-"  ����˱����ơ��Хå����åץե����뤬���٤ޤ�: \n"
-"\t- �����ƥ�ե�����\n"
-"\t- �桼���ե�����\n"
-"\t- ����¾�ե�����\n"
-"\t���뤤���������ƥ�䡢����¾�����ƥ�ʥ�����ɥ���\n"
-"\t�ѡ��ƥ������ˤ�Хå����åפǤ��ޤ���\n"
-"\n"
-"  Drakbackup �Ǥϡ��ʲ��Υ�ǥ����˥Хå����åפ��Ǥ��ޤ�:\n"
-"\t- �ϡ��ɥɥ饤��.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (autoboot, �쥹���塼����ư���󥹥ȡ�����).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- �ơ���\n"
-"\n"
-"  Drakbackup �Ǥϡ�¾�Υǥ��쥯�ȥ������Ǥ�����\n"
-"  �����ƥ�������Ǥ��ޤ���\n"
-"\n"
-"  �ǥե���ȤǤϤ��٤ƤΥХå����åפ�\n"
-"  /var/lib/drakbackup �ǥ��쥯�ȥ����¸����ޤ���\n"
-"\n"
-"  ����ե�����:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"���������:\n"
-"  \n"
-"  �������ƥåפǤ� DrakBackup �Ϥ�ȤΥǥ��쥯�ȥ��\n"
-"  ������ơ����٤ƤΥХå����åץե����뤬�������ɤ���\n"
-"  �Τ���ޤ��������������ˡ����λ����Υ����ƥ��Хå�\n"
-"  ���åפ��Ƥ����ޤ��礦��\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s �Υ��󥹥ȡ���˼��Ԥ��ޤ������ʲ��Υ��顼��ȯ��:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "���󥹥ȡ���Ѥߥե���Ȥ򸡺�"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "���󥹥ȡ���Ѥߥե���Ȥ����򤷤ʤ�"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "���٤ƤΥե���Ȥ�����å�"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "�ե���Ȥ����Ĥ���ޤ���"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "��λ"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "�ޥ���Ȥ��줿�ѡ��ƥ������ˤϥե���Ȥ����Ĥ���ޤ���"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "�������ե���Ȥ�����ľ��"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "�ե���Ȥ����Ĥ���ޤ���\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "���󥹥ȡ���Ѥ߰�������ե���Ȥ�õ��"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "�ե���Ȥ򥳥ԡ�"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "True Type �ե���ȤΥ��󥹥ȡ���"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "ttmkfdir ��ʤΤǾ������Ԥ���..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "True Type ���󥹥ȡ��봰λ"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "�ե�����Ѵ�"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "type1inst ������"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript ������"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf �ե�����Ѵ�"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm �ե�����Ѵ�"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "����ե��������ʤ�"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "XFS �Ƶ�ư"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "�ե���ȥե��������ʤ�"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs �Ƶ�ư"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"�ե���ȥ��󥹥ȡ������Ω�äơ������Υե���Ȥ�Ȥ������䥤�󥹥ȡ��뤹��"
-"���������뤳�Ȥ��ǧ���Ƥ���������\n"
-"\n"
-"-�ե���Ȥ��̾�Τ�����ǥ��󥹥ȡ���Ǥ��ޤ����Ȥ��ɤ����������ʥե���Ȥ� "
-"X �����Ф��ϥ󥰤����礬����ޤ���"
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "�ե�����ɤ߹���"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "������ɥ����Υե���Ȥ��äƤ���"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "�ե���ȤΥ��󥤥󥹥ȡ���"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "��饪�ץ����"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "�ե���Ȱ���"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "���Υե���Ȥ򥵥ݡ��Ȥ��륢�ץꥱ������������Ǥ�������:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "���̥ץ��"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "�ե���ȥե����뤫�ǥ��쥯�ȥ������ǡ��ɲáפ򥯥�å�"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "�����Υ��󥹥ȡ���"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "�ޤ������ʤ���Х���å����Ƥ�������"
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "����ʤ餳�����"
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "���٤Ƥ��������"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "���٤Ƥ�����"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "��������"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "���˥����ƥ���"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "�����ƥ��Υե���Ȥ򥳥ԡ�"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "�ե���ȤΥ��󥹥ȡ�����Ѵ�"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "���󥹥ȡ����κ��"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "�����ƥफ��ե���Ȥ���"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "���󥤥󥹥ȡ����κ��"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "���󥿡��ͥå���³�ζ�ͭ"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "���󥿡��ͥå���³��ͭ�ϸ���ͭ��"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"���󥿡��ͥå���³��ͭ�Υ��åȥ��åפϤ��Ǥ˴�λ��\n"
-"ͭ���ˤʤäƤ��ޤ���\n"
-"\n"
-"�ɤ����ޤ�����"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "̵����"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "̵��"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "������"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "�����Ф�̵���ˤ��Ƥ��ޤ��ġ�"
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "���󥿡��ͥå���³��ͭ��̵���ˤʤ�ޤ�����"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "���󥿡��ͥå���³��ͭ�ϸ���̵���Ǥ�"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"���󥿡��ͥå���³��ͭ�Υ��åȥ��åפϤ��Ǥ˴�λ��\n"
-"̵���ˤʤäƤ��ޤ���\n"
-"\n"
-"�ɤ����ޤ�����"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "ͭ����"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "�����Ф�ͭ���ˤ��Ƥ��ޤ��ġ�"
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "���󥿡��ͥå���³��ͭ��ͭ���Ǥ���"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"���Υޥ���Υ��󥿡��ͥå���³��ͭ����褦�����ꤷ�ޤ���\n"
-"���ε�ǽ������ȡ���������ͥåȥ�����¾�Υ���ԥ塼������\n"
-"���Υ���ԥ塼���Υ��󥿡��ͥå���³��Ȥ��ޤ���\n"
-"�����������륨�ꥢ�ͥåȥ�� (LAN) ��Ĥ���ˤϡ����ѤΥͥåȥ�������ץ�"
-"���פ�ޤ���"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "���󥿡��ե����� %s (�⥸�塼�� %s �����)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "���󥿡��ե����� %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "�ͥåȥ�������ץ�������ޤ���"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"�����ƥ��˥������ͥåȥ����ץ������Ĥ���ޤ��� �ϡ��ɥ���������ġ�����"
-"�Ԥ��Ƥ���������"
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "�ͥåȥ�����󥿡��ե�����"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"�����ƥ�ˤ����ꤵ�줿�ͥåȥ�������ץ����ҤȤĤ�������ޤ���\n"
-"\n"
-"%s\n"
-"\n"
-"���Υ����ץ��� LAN ����³���ޤ��͡�"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"�������륨�ꥢ�ͥåȥ���ˤĤʤ���ͥåȥ�������ץ���\n"
-"����Ǥ���������"
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "�ͥåȥ�����󥿡��ե�����������ѤߤǤ����ꤵ��Ƥޤ���"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"�ٹ𡢥ͥåȥ�������ץ� (%s) ������ѤߤǤ���\n"
-"\n"
-"��ư������򤷤ޤ�����\n"
-"\n"
-"��ư�Ǥ�뤳�Ȥ�Ǥ��ޤ���������ʤ���μ���ɬ�פǤ��衣"
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "��ư������"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "���ߤΥ��󥿡��ե����������ɽ��"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"C��%s�פθ���������:\n"
-"\n"
-"�ͥåȥ��: %s\n"
-"IP ���ɥ쥹: %s\n"
-"IP °��: %s\n"
-"�ɥ饤��: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"�����������ݻ����ơ����Ǥ� DHCP �����Ф����֤�����Τ����ꤹ�뤳�Ȥ�Ǥ���"
-"�������ξ��ˤϡ���������ͥåȥ����C���饹���ɥ쥹���������ɤ�Ǥ��뤫��"
-"ǧ���Ƥ�����������ư����Ϥ��ޤ��󤷡�DHCP �����Ф�������Ѥ��ޤ���Τǡ�\n"
-"\n"
-"���뤤�ϡ�������ǥ��󥿡��ե�������DHCP�����Ф�������뤳�Ȥ�Ǥ��ޤ���\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C���饹��������ͥåȥ��"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "�ʤ��Ρ�DHCP �����Ф� IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "���󥿡��ե�������DHCP�����Фκ�����"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "��������ͥåȥ������.0�פǽ���äƤ��ޤ������Ǥ��ޤ���"
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "���ߤ� %s ������Ǥ�LAN���ɥ쥹�����ͤ��뤫�⤷��ޤ���\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "�ե������������������򸡽С�"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"�ٹ𡪴�¸�ե����䥦�����������򸡽С�\n"
-"���󥹥ȡ����ˡ���ư�ǽ������פ뤫�⤷��ޤ���"
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "������..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "������ץȤ����ꡢ���եȥ������Υ��󥹥ȡ��롢�����Фε�ư..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "�ѥå����� %s �Υ��󥹥ȡ��������ȯ��"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"���꤬���٤ƽ����ޤ�����\n"
-"����Ǽ�ư�ͥåȥ�������dhcp) ��Ȥäơ�LAN ���¾�Υޥ���ȥ��󥿡��ͥ�"
-"����³��ͭ�Ǥ��ޤ���"
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "����Ϥ���Ǥ��ޤ��������ޤ�̵���ˤʤäƤ��ޤ���"
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "����Ϥ���Ǥ��ơ����ޤ�ͭ���ˤʤäƤ��ޤ���"
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "���󥿡��ͥå���³��ͭ�Ϥޤä������ꤵ��Ƥ��ޤ���"
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "���󥿡��ͥå���³������"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"���󥿡��ͥå���³��ͭ�桼�ƥ���ƥ��ؤ褦������\n"
-"\n"
-"%s\n"
-"\n"
-"���ꥦ�������ɤ�ư����ˤϡ�����פ򥯥�å����ޤ��礦��"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "�ͥåȥ������ (%d �����ץ�)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "�ץ��ե�����: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "�ץ��ե��������ġ�"
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "����������ץ��ե����롧"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "�����ץ��ե�����ġ�"
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "��������ץ��ե������̾���ʿ��ץ��ե�����ϸ��ߤΤ�ΤΥ��ԡ��Ǥ��ˡ�"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "�ۥ���̾:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "���󥿡��ͥå�"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "������: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "�����ȥ�����:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "���󥿡��ե�����:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "���ơ�����: "
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "�������Ԥ���"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "���󥿡��ͥåȥ�������������"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN������"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "�ɥ饤��"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "���󥿡��ե�����"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "�ץ��ȥ���"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "����"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "LAN ����ġ�"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "���������ɤε�ư�ˤϤ�����򥯥�å� -->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "����������..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Ŭ��"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "�������Ԥ���ġ������Ŭ�Ѥ��Ƥ��ޤ�"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "��³��λ"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "��³����Ƥ��ޤ���"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "��³�ġ�"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "��³�����ǡġ�"
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"�ٹ��̤Υ��󥿡��ͥå���³�����Ф���ޤ������ͥåȥ���ϻ����椫�⤷���"
-"����"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"����ѤߤΥ��󥿡��ե�����������ޤ���\n"
-"������פ򥯥�å����Ƥޤ����������ꤷ�Ƥ���������"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN������"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "�����ץ� %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "�֡��ȥץ��ȥ���"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "��ư���˳���"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP ���饤�����"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "���ޤ���ͭ����"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "���ޤ���̵����"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"���Υ��󥿡��ե������Ϥޤ����ꤵ��Ƥ��ޤ���\n"
-"�祦����ɥ������ꥦ�������ɤ�ư���Ƥ�������"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"���󥿡��ͥå���³������ޤ���\n"
-"������פ򥯥�å����ƺ������Ƥ�������"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "���󥿡��ͥå���³����"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "���󥿡��ͥå���³����"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "��³�μ���: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "�ѥ�᡼��"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "�����ȥ�����"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "�������ͥåȥ�����"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP ���饤�����"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "�������ƥ���٥��������"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "����ȥ����륻�󥿡�"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "���Ѥ���ġ��������Dz�����"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "���ʥ��ʥ����֥��"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (�����֥�)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (�����֥�-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "��� (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "���� (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "���� (�����֥�)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "��衼���å�"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "���������"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "���衼���å�"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "�������ȥ�ꥢ"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "�˥塼��������"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "��եꥫ"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "���를�����"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"�Ǥ�\n"
-"�ƥ�������ȹ�����Ϥ��Ƥ�������"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "�ƥ��������"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "�ϰ衧"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "�ƥ�ӥ����ͥ��õ���Ƥ��ޤ�..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "�ƥ�ӥ����ͥ��õ���Ƥ��ޤ�"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "�Ȥ���: keyboarddrake [--expert] [�����ܡ���]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "�����ܡ��ɥ쥤�����Ȥϲ��Ǥ�����"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "BackSpace���������󥽡���Ǿõ�򤹤�褦�ˤ��ޤ�����"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "CD-ROM�������ؤ��Ƥ�������"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"���󥹥ȡ���CD ��ɥ饤�֤ˤ���ơ� Ok �򲡤��Ƥ���������\n"
-"CD���ʤ���С�Cancel �򲡤��ƥ饤�֥��åץ��졼�ɤ���򤷤Ʋ�������"
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "�饤�֥��åץ��졼�ɤ򳫻ϤǤ��ޤ���!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "�ѹ�����λ���ޤ�������ͭ���ˤ���ˤϤ��ä�����������Ȥ��Ƥ���������"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "���������ʬ������ɽ��"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/�ե�����(F)/����(N)"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/�ե�����(F)/����(O)"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/�ե�����(F)/��¸(S)"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/�ե�����(F)/�̤�̾������¸(A)"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/�ե�����(F)/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/���ץ����(_O)"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/���ץ����(O)/�ƥ���"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/�إ��(_H)"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/�إ��(H)/���Υ��եȤˤĤ���(A)"
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-"-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-iso8859-1,-*-fixed-medium-r-normal--"
-"24-*-100-100-c-*-jisx0208.1983-0,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-"-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-iso8859-1,-*-fixed-medium-r-normal--"
-"24-*-100-100-c-*-jisx0208.1983-0,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "�桼��̾"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "������"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "��������"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Mandrake �ġ��������"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "����"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "�������˥����뤿��Υġ���"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "����"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "���פ�����"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "�ʲ��ˤϰ��פ��ʤ�"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "�ե����������"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "������"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "�ե����������"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Mail/SMS �ٹ�"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "�������Ԥ��򡢥ե����� %s ��õ���Ƥ��ޤ���"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Mail/SMS �ٹ������"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Mail/SMS ����桼�ƥ���ƥ��ؤ���ä��㤤�ޤ�����\n"
-"\n"
-"�����ǤϷٹ𥷥��ƥ�����ꤷ�ޤ���\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "�����ӥ�����"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "�ʲ�������������ӥ����ߤޤä�����󤬽Фޤ���"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "������ɤ߹�����"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "��٤������ͤ���ä�����󤬽Фޤ�"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "�ٹ������"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "�����ƥ�ηٹ���ˡ������"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "̾����Ĥ�����¸..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "�ޥ����η��Ϥʤ�Ǥ�����"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_usb�����Ĥ���ޤ���\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "����ܥ���򥨥ߥ�졼�Ȥ��ޤ�����"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s �� %s �Ǹ��Ĥ���ޤ��������ꤷ�ޤ���?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "������ʤ����򤷤Ʋ�����"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "���� %s ������ʤϥ��ݡ��Ȥ���Ƥ��ޤ���"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "�֡��ȥǥХ���"
-
-#: ../../standalone/scannerdrake_.c:102
-#, fuzzy, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"printerdrake �ε�ư�ϡ�Mandrake ����ȥ����륻�󥿡��Υϡ��ɥ������ι�ǹԤ�"
-"�Ƥ���������"
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "�ե������������������"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "�ե������������������"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"�ե���������������\n"
-"\n"
-"���Ǥ˥ե��������������������ѤߤǤ���\n"
-"������ѹ����������ˤϡ�����פ򥯥�å����Ƥ�������"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"�ե���������������\n"
-"\n"
-"������פ򥯥�å�����ɸ��ե�������������������ꤷ�ޤ�"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "���������"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Ƴ�����饹������"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "�ǥ������θ���"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "�ޥ���������"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "�����ܡ��ɤ�����"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "�������ƥ�"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "�ե����륷���ƥ�"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "�ե����ޥå�"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "�ѥå�����������"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "�����ƥ��Ƴ��"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "�桼������Ͽ"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "�ͥåȥ������"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "�����ӥ�������"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "�֡��ȥ���������"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "��ư�ǥ���������"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X ������"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "�����ƥ๹���򥤥󥹥ȡ���"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Ƴ����Ȥ�λ"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"�ߥ˥ե�������������������\n"
-"\n"
-"���� Mandrake Linux �ޥ����ѤθĿ��ѥե�������������������򤷤ޤ���\n"
-"���Ϥ����ѥե�������������������ˤϡ����Ѥ� MandrakeSecurity\n"
-"�ե���������������ѥå�������Ƥ���Ƥ���������"
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"���ơ����󥿡��ͥå���³�����������ӥ��ˤĤ��Ƥ����������Ҥͤ��ޤ���\n"
-"������Ȥ��ˤϤ褯�ͤ��Ƥ������������ʤ��Υ���ԥ塼���Υ������ƥ�\n"
-"�˴ؤ������Ǥ����顣\n"
-"\n"
-"�������������ӥ��ǡ����޼�ʬ�ǻȤäƤ��ʤ���Τϥե���������������\n"
-"�DZ����Ƥ��ޤ��ޤ��礦�����Υ��ץꥱ��������¹Ԥ���С������\n"
-"���ĤǤ��ѹ��Ǥ��ޤ���"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"���Υޥ���ǡ������󥿡��ͥåȤ��鸫���륦���֥����Ф�¹Ԥ��ޤ�����\n"
-"��ʬ�Υޥ�������ǻȤ������֥����Ф����ʤ��ʤ顢�����ǡ֤������פ�\n"
-"�����ޤ��礦��\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"���Υޥ���ǥ͡��ॵ���С�DNS) ��¹Ԥ��ޤ������������󥿡��ͥåȤ�\n"
-"IP �䥾���������������褦���ꤷ�Ƥ��ʤ���С��֤������פ�������\n"
-"����������\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"������� Secure Shell (ssh) ��³����Ĥ��ޤ�������ssh��\n"
-"telnet�������Τǡ���������˻Ȥ��ޤ������� telnet ��ȤäƤ�����\n"
-"���Ф� ssh ���ڤ��ؤ��ޤ��礦��telnet �ϰŹ沽����Ƥ��ޤ��󡣤�����\n"
-"�ѥ���ɤ���ޤ�����������ޤ���ssh�ϰŹ沽����Ƥ���Τǡ�����\n"
-"���ä����İ�����Ǥ��ޤ���"
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"������� telnet ��³����Ĥ��ޤ�����\n"
-"���ä����������Ȥ��ꡢ����ϤȤ�Ǥ�ʤ������ʤ��ȤǤ��������Ǥ�\n"
-"���Фˡ֤������פ������ơ�ssh ��Ȥ��褦�ˤ����ᤷ�ޤ���\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"���󥿡��ͥåȤǥ��������Ǥ��� FTP �����Ф�¹Ԥ��ޤ�����\n"
-"�⤷�����ʤ顢�ʤ�٤� Anonymous ž���ˤ����Ȥ��褦�����ᤷ�ޤ���\n"
-"FTP ����������ѥ���ɤϡ����٤���İ�Ǥ��ޤ���FTP �ϥѥ����������\n"
-"�Ź��Ȥ�ʤ�����Ǥ���\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"�᡼�륵���Ф�¹Ԥ��ޤ��������᡼��������� pine��mutt�ʤɤ�\n"
-"�ƥ����ȥ١����Υ᡼�륯�饤����Ȥ�Ȥ��ͤϡ����֤�᡼�륵����\n"
-"��ɬ�פǤ�������ʤ���С��ե���������������DZ����ޤ��礦��\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"POP �����Ф� IMAP �����ФϻȤ��ޤ�����\n"
-"���Υޥ����ͳ�ǡ�web�᡼��ʳ��Υ᡼�륢������Ȥ����ꤹ��\n"
-"�ʤ�ɬ�פǤ���\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"2.2 �����ͥ��ȤäƤ��ޤ��͡��⤷�ͥåȥ�� IP ��\n"
-"�����䥪�ե����Ǽ�ư������ƤˤʤäƤ���ʤ顢�����\n"
-"����������򤷤ޤ�����ư������ƤˤʤäƤ��ޤ�����\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"���ʤ��Υ���ԥ塼���ϡ��ۤ��Υ���ԥ塼���Ȼ��פ��碌�򤷤�\n"
-"���ޤ�����������ϤդĤ����浬�Ϥ����絬�Ϥ� Linux/Unix �ȿ�\n"
-"�ǡ���������ʤɤ�Ʊ����Ȥ�Τ˻Ȥ��ޤ������������礭��\n"
-"�ȿ��ΰ����ǤϤʤ������פ��碌�ʤ�İ�������Ȥ��ʤ���С�\n"
-"���֤����פǤ�"
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"���괰λ���ѹ���ǥ������˽񤭹��ߤޤ�����\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "%s �������ޤ���: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "�񤭹����Ѥ� %s �������ޤ���: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "DHCP �ϻȤ�ʤ�"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "DHCP ��Ȥ�"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "NTP �Ϥ���ʤ�"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "NTP��Ȥ�"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "��¸���ʤ�"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "��¸���ƽ�λ"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "�ե������������������ꥦ��������"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "�������ʤ���򥤥󥿡��ͥåȤ����ɸ��"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "�Ϥ��ʥե�����������������̤���"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "�������Ԥ���...���󥹥ȡ���ѤߥХå��������ǧ��"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"ɬ�ץѥå������Υ��󥹥ȡ���˼��Ԥ��ޤ��� : %s �� Bastille.\n"
-"��ư�ǥ��󥹥ȡ��뤷�ƤߤƤ���������"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "������Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "�ͥåȥ������ԥ塼�� (���饤�����)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS ������, SMB ������, Proxy ������, SSH ������"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "���ե�����Ϣ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome ������ơ������"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm Pilot �� Visor�ѥġ���"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "������ơ������"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "�����С��ե�������������/�롼��"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "�ɥᥤ��̾������ (DNS) �ȥͥåȥ�����󥵡��С�NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"���ե����ϥ��ե�: ��ץ� (kword, abiword), ɽ�׻� (kspread, gnumeric), pdf"
-"�ӥ塼���ʤ�"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "�����ǥ�����Ϣ�ġ��롧mp3, midi, �ߥ������ʤ�"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Linux ��ե꡼���եȴ�Ϣ���ܤ�ϥ��ġ�ʸ��"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE ������ơ������"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm�ʤ�"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "�ޥ����ǥ������ӥǥ�"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "�᡼�롢�˥塼����web, �ե�����ž��������åȤʤɤΥġ���"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "�ǡ����١���"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL �� MySQL �ǡ����١���������"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "�ޥ���������ڤˤ���ġ���"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "�ޥ����ǥ������������"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "�桼�ƥ���ƥ�"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "�ɥ�����ơ������"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "���󥽡���ġ���"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix �᡼�륵����, Inn �˥塼��������"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "���󥿡��ͥåȡ����ơ������"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "�ޥ����ǥ��������ơ������"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "����"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "����ե�����ʥǥ����ȥåפ��ä�"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "K �ǥ����ȥå״Ķ�������Ū�ʥ���ե������Ķ��ˡ���Ϣ�ġ���ͤ��碌"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "����ե��å��Ķ�"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache �� Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CD ��Ĥ��äƾƤ��ġ���"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "���ե���������ơ������"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "������"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm �ʤ�"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "The Gimp�ʤɤβ����������ե�"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C �� C++ ��ȯ�饤�֥�ꡢ�ץ������� include �ե�����"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "�ͥåȥ������ԥ塼����������"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "�����С��᡼��/���롼�ץ�����/�˥塼��"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "�����ॹ�ơ������"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "�ӥǥ��ץ졼����Խ����ե�"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "�ޥ����ǥ���������"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "��ڥ��եȡ��ƥ�ӥ����ࡢ�ܡ��ɥ����ࡢ��ά������ʤ�"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"�᡼���˥塼�����������ѥġ��� (pine, mutt, tin..) �ȡ�Web�֥饦���ѥġ���"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "���������֥��եȡ����ߥ�졼������˥��ѥ��ե�"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "�Ŀͤκ�̳����"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "�Ȥ��䤹�����ץꥱ��������ǥ����ȥåץġ������ġ�����ե������Ķ�"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "ssh �ʤɳƼ�ץ��ȥ����ѥ��饤�����"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "���󥿡��ͥåȥ����ȥ�����"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "������ɤ�ӥǥ��κ����Խ����ե�"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "����¾����ե��å��ǥ����ȥå�"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "���ǥ����������롢�ե������Ϣ�ġ��롢�����ߥʥ�"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "gnucash�ʤɤβȷ״������ե�"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "�Ŀ;������"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "�ޥ����ǥ�����CD ��Ƥ�"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "�ʳإ�����ơ������"
-
-#~ msgid "About"
-#~ msgstr "����"
-
-#~ msgid "             Help           "
-#~ msgstr "             �إ��           "
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "�����ͥ���б����������ͥ�⥸�塼��򥢥������Ǥ��ޤ���ʥե�����%s������"
-#~ "�ޤ���)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr ""
-#~ "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,-*-fixed-medium-r-"
-#~ "normal--24-*-100-100-c-*-jisx0208.1983-0,*"
-
-#~ msgid "None"
-#~ msgstr "�ʤ�"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "�ǥե���ȥץ�󥿤����Ӥޤ��礦��"
-
-#~ msgid ""
-#~ "With remote CUPS servers, you do not have to configure any printer here; "
-#~ "CUPS servers inform your machine automatically about their printers. All "
-#~ "printers known to your machine currently are listed in the \"Default "
-#~ "printer\" field. Choose the default printer for your machine there and "
-#~ "click the \"Apply/Re-read printers\" button. Click the same button to "
-#~ "refresh the list (it can take up to 30 seconds after the start of CUPS "
-#~ "until all remote printers are visible). When your CUPS server is in a "
-#~ "different network, you have to give the CUPS server IP address and "
-#~ "optionally the port number to get the printer information from the "
-#~ "server, otherwise leave these fields blank."
-#~ msgstr ""
-#~ "��⡼�Ȥ� CUPS �����Фʤ顢�����Ǥϥץ����������פǤ���\n"
-#~ "CUPS �����Фϥޥ���˼�ưŪ�˥ץ�󥿾�����Ϥ��ޤ������ޡ�\n"
-#~ "���ʤ��Υޥ����ΤäƤ���ץ�󥿤� \"�ǥե���ȥץ��\"\n"
-#~ "�˽ФƤ��ޤ����ޥ���Υǥե���ȥץ�󥿤�����ǡ�\n"
-#~ "\"�ץ�󥿤�Ŭ��/���ɹ�\" �ܥ���򲡤��Ƥ��������������ι���\n"
-#~ "�ˤ⤳�Υܥ���򲡤��ޤ��ʥ�⡼�ȥץ�󥿤�������ޤǡ�CUPS \n"
-#~ "���Ϥ������30�ä�����ޤ���\n"
-#~ "CUPS �����Ф��̤Υͥåȥ���ˤ���ʤ顢CUPS�����Ф�IP���ɥ쥹\n"
-#~ "�ȡ����ˤ�äƤϥݡ����ֹ����ꤷ�ʤ��ȥ����Ф���ץ�󥿾�\n"
-#~ "�󤬤�館�ޤ��󡣤����Ǥʤ���С������϶���ˤ��ޤ���"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "�ץ�󥿤�Ŭ��/���ɹ�"
-
-#~ msgid "Configure printing system"
-#~ msgstr "���������ƥ�����"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "�⥸�塼�� %s �Υ��ץ�������ꤷ�Ƥ���������"
-
-#~ msgid "Low"
-#~ msgstr "�㤤"
-
-#~ msgid "Medium"
-#~ msgstr "�ۤɤۤ�"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "���Υ������ƥ���٥�Ϥ���äȤ褯�ʤäƤ��ơ��ٹ������å���\n"
-#~ "�����Ƥ��ޤ���"
-
-#~ msgid "Boot mode"
-#~ msgstr "�֡��ȥ⡼��"
-
-#~ msgid "Export"
-#~ msgstr "�������ݡ���"
-
-#~ msgid "click here"
-#~ msgstr "�����򥯥�å�"
-
-#~ msgid "mount failed"
-#~ msgstr "�ޥ���Ȥ˼���"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Linux �ϻ��֤�GMT���Ĥޤ�֥���˥å�ɸ����פǴ������Ƥ��ơ������\n"
-#~ "���ʤ�������������Ӥˤ��碌���Ѵ����ޤ���"
-
-#~ msgid ""
-#~ "You may choose to upload updated packages that have been released after "
-#~ "the\n"
-#~ "distribution has been made available. You will get security fixes or bug\n"
-#~ "fixes, but you need to have an Internet connection configured to "
-#~ "proceed.\n"
-#~ "Answer \"Yes\" to the dialog to choose an available mirror. After "
-#~ "choosing\n"
-#~ "a mirror, a packages selection tree appears to allow you to choose "
-#~ "packages\n"
-#~ "individually, package that need to be updated are already selected, but "
-#~ "you\n"
-#~ "may choose to install other package or deselect packages. Press \"Install"
-#~ "\"\n"
-#~ "to install the updated package or \"Cancel\" not to upgrade them. (this\n"
-#~ "*REALLY* need to be modified according to real DrakX, if you need other\n"
-#~ "help section, let us (DrakX team developer) known)."
-#~ msgstr ""
-#~ "�ǥ����ȥ�ӥ塼�����������ʹߤ˹������줿�ѥå������򥢥åץ�����\n"
-#~ "����褦�˻���Ǥ��ޤ����������ƥ��ե��å�����Х��ե��å������Ǥ�\n"
-#~ "�ޤ���������ˤϥ��󥿡��ͥå���³��ɬ�פǤ���\n"
-#~ "�Ȥ���ߥ顼�����Ȥ����֤ˤϡ������������� \"�Ϥ�\" ������Ǥ���������\n"
-#~ "�ѥå���������ĥ꡼���ФƤ��ơ����̤˥ѥå����������٤�褦�ˤʤ�ޤ���\n"
-#~ "������ɬ�פʥѥå�����������ѤߤǤ�����¾�Υѥå�������������ꡢ�ޤϤ�\n"
-#~ "�������������Ǥ��ޤ��������ѥå������Υ��󥹥ȡ���ˤ� \"���󥹥ȡ���"
-#~ "\"\n"
-#~ "�򲡤����������ʤ��ʤ� \"����󥻥�\" �򲡤��ޤ� (�������ʪ�� DrakXŪ\n"
-#~ "�ˤ����Ф��ѹ����٤��ǡ��⤷¾�Υإ�פ�ɬ�פʤ顢DrakX��ȯ������ޤ�\n"
-#~ "�������"
-
-#~ msgid ""
-#~ "To know about the options available for the current printer read either "
-#~ "the list shown below or click on the \"Print option list\" button. %s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "���ޤΥץ�󥿤ǻȤ��륪�ץ��������򸫤�ˤϡ����ΰ������ɤफ�����뤤��"
-#~ "�֥��ץ�������������ץܥ���򥯥�å����ޤ��礦��%s\n"
-#~ "\n"
-
-#~ msgid ""
-#~ "This %s scanner uses parallel port, which is unsupported for the moment"
-#~ msgstr ""
-#~ "���� %s ������ʤϥѥ���ݡ��Ȥ�Ȥ��Τǡ����ޤϥ��ݡ��Ȥ���Ƥ��ޤ���"
-
-#~ msgid "Connect to Internet"
-#~ msgstr "���󥿡��ͥåȤؤ���³"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "���󥿡��ͥåȤ�������"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "�ͥåȥ����³ (LAN/���󥿡��ͥå�)������"
-
-#~ msgid "authentification"
-#~ msgstr "ǧ��"
-
-#~ msgid "user"
-#~ msgstr "�桼��"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "nfs ��ͭ�꥽�����ǻȤ����Τ򥹥������"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "������ %s �� nfs ��ͭ�꥽�����ǻȤ����Τ򥹥������"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "samba ��ͭ�꥽�����ǻȤ����Τ򥹥������"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "������ %s �� samba ��ͭ�꥽�����ǻȤ����Τ򥹥������"
-
-#~ msgid "Removable media"
-#~ msgstr "��ࡼ�Х֥��ǥ���"
-
-#~ msgid "Active"
-#~ msgstr "�����ƥ���"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "��%s�ץץ�󥿤������ΤȤ����Ǹ��Ĥ���ޤ���"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "��������ץ�󥿥ǥХ���"
-
-#~ msgid "Printer Device"
-#~ msgstr "�ץ�󥿥ǥХ���"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "�ǥХ���/�ե�����̾������ޤ���"
-
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "��⡼��CUPS �����о�Υץ��"
-
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "��⡼�ȥ����о�Υץ��"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "��³���Ƥ��ޤ�..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "��³���Ĥ��Ƥ��ޤ�..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "��³���Ĥ��Ƥ��ޤ���\n"
-#~ "root �ˤʤäơ��ʲ���¹Ԥ��ƤߤƤ���������\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down"
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "�����ƥ����³�����Ǥ���ޤ�����"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "���󥹥ȡ��뤹�륵����������Dz�����"
-
-#~ msgid "Total size: "
-#~ msgstr "��ץ�����: "
-
-#~ msgid "Please wait, "
-#~ msgstr "���Ф餯���Ԥ���������"
-
-#~ msgid "Total time "
-#~ msgstr "��׻��� "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "���Ǥˤ��� X11 �������Ȥ��ޤ�����"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "�ץ�󥿤��Ĥʤ��äƤ���ǥХ����ϲ��Ǥ���\n"
-#~ "(���� /dev/lp0 �� LPT1: �ˤʤ�ޤ�)��\n"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "�ٹ𡢥ͥåȥ�������ץ��Ϥ⤦���꤬����Ǥ��ޤ���\n"
-#~ "�������ʤ����ޤ��衣"
-
-#~ msgid "New"
-#~ msgstr "����"
-
-#~ msgid "Remote"
-#~ msgstr "��⡼��"
-
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr ""
-#~ "��Υܥ���򥯥�å����뤫\n"
-#~ "\n"
-#~ "\"New\"��Ȥ��ޤ�"
-
-#~ msgid "Use \"New\""
-#~ msgstr "\"New\"��Ȥ��ޤ�"
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr "��ΰ����˴�˾�Υ���ȥ꤬�ʤ���Ф��������Ϥ��ޤ��礦:"
-
-#~ msgid "Shared resource"
-#~ msgstr "��ͭ�꥽����"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "���� (%s)����ä����Τ�\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr "? (�ǥե���Ȥ� %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "�ɤ�ˤ��ޤ������ʥǥե���Ȥ� %s�����Фʤ��ʤ�֤ʤ��ס�"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "/etc/sysconfig/autologin ���ɤߤȤ��Ѥ˳����ޤ���: %s"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "�դĤ��ϡ�/dev/hda�סʥץ饤�ޥ����ͥ�Υޥ������ɥ饤�֡ˤ���\n"
-#~ "��/dev/sda�� (�ǽ�� SCSI �ǥ�����) �����Ӥޤ���\n"
-#~ "������������ˤ���¾���ͤ�����Ƥ���������"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "�ͥåȥ���ǥХ��� %s ��Ƶ�ư���ޤ��������Ǥ��͡�"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "�ͥåȥ����Ƶ�ư���Ƥߤޤ�����"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "��������Ǥ��͡�"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "�ͥåȥ���ǥХ�����Ƶ�ư���ޤ���:\n"
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "�ʲ��ΰ������塼������ѤߤǤ���\n"
-#~ "�������塼���ɲá��ѹ��Ǥ��ޤ���"
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "��³�����ॢ���� (��) [ �١�����̤���� ]"
-
-#~ msgid ""
-#~ "The Mandrake Linux spreads among several CDROMs. It may be that drakX "
-#~ "has\n"
-#~ "selected packages on another CDROM than the installation CDROM, and when "
-#~ "it\n"
-#~ "needs that you put another one into the drive, it will eject the current "
-#~ "CDROM\n"
-#~ "and ask you for another one."
-#~ msgstr ""
-#~ "Mandrake Linux ��ʣ���� CDROM �ˤޤ����äƤ��ޤ����Ǥ����� drakX ��\n"
-#~ "���󥹥ȡ���CDROM�ʳ���CDROM�����ä��ѥå���������������⤷��ޤ���\n"
-#~ "�̤�CDROM��ɬ�פˤʤä��顢���ޤ�CDROM�ϥ��������Ȥ���ơ��̤Τ������\n"
-#~ "����Ⱥ�¥���Ǥޤ���"
-
-#~ msgid ""
-#~ "drakX just skips this test unless you purposely click on the "
-#~ "corresponding step\n"
-#~ "on the left. By default, drakX sees your mouse as a two-button mouse and\n"
-#~ "emulates the third button, and knows whether it's PS/2, serial or USB.\n"
-#~ "\n"
-#~ "Perhaps this is not what you want. In that case, you just have to select "
-#~ "the\n"
-#~ "right type for your mouse in the list which appears.\n"
-#~ "\n"
-#~ "You can now test your mouse. Use buttons and wheel to verify if settings "
-#~ "are\n"
-#~ "good. If not, you can click on \"Cancel\" to choose another driver."
-#~ msgstr ""
-#~ "drakX �ϡ������б����륹�ƥåפ�տ�Ū�˥���å����Ƥ��ʤ��¤ꡢ����\n"
-#~ "�ƥ��Ȥ�ȤФ��ޤ����ǥե���ȤǤ� drakX �ϡ��ޥ�����2�ܥ���ޥ�����\n"
-#~ "��Ƚ�Ǥ�������ܥ���ϥ��ߥ�졼�Ȥ��ޤ��������줬 PS/2, ���ꥢ�롢 USB\n"
-#~ "�Τɤ줫�ϼ�ưȽ�ꤷ�ޤ���\n"
-#~ "\n"
-#~ "�Ǥ⡢����Ϥ��ʤ��Τۤ�������ǤϤʤ����⤷��ޤ��󡣤��ξ��ˤϡ�\n"
-#~ "�ФƤ����������Ŭ�ڤʥޥ����μ��������Ǥ���������\n"
-#~ "\n"
-#~ "�������ޥ�����ƥ��Ȥ��ƤߤƤ����������ܥ����ۥ������Ȥä����꤬\n"
-#~ "����פ���ǧ���ޤ�������ʤ�֥���󥻥�פ�������̤Υɥ饤�Фˤ��ޤ���"
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "%s ��ǥե���ȥץ�󥿤ˤǤ��ޤ���Ǥ�����"
-
-#~ msgid "Spooler: "
-#~ msgstr "���ס���: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "�ޥ�����ƥ��Ȥ��ƤߤƤ���������"
-
-#~ msgid "Press next to continue."
-#~ msgstr "�ּ��פ򲡤�����˿ʤߤޤ��礦��"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "�ǥե���ȤΥ���٥�"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "/etc/fstab �򹹿�"
-
-#~ msgid "Format all"
-#~ msgstr "���Ƥ�ե����ޥå�"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "���ƤΥѡ��ƥ�������ե����ޥåȤ�����,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "�����Υѡ��ƥ��������Υǡ����ϼ����ޤ�"
-
-#~ msgid "Reload"
-#~ msgstr "�������"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "���󥹥ȡ���λ��ȥ����ƥ����ѻ��˻Ȥ��������������Ǥ���������"
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "���󥹥ȡ����³����ˤϡ���Υ饤���󥹤ξ���Ʊ�դ��Ƥ���������\n"
-#~ "\n"
-#~ "\n"
-#~ "����Ʊ�դ���ʤ��Ʊ�դ���פ򥯥�å����ޤ��礦��\n"
-#~ "\n"
-#~ "\n"
-#~ "Ʊ�դǤ��ʤ���Сֵ��ݡפ����Ӥޤ������󥹥ȡ���Ͻ�λ�������ߤ������\n"
-#~ "���ΤޤޤǤ�"
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "��Υꥹ�Ȥ��顢��ʬ�Υ����ܡ������֤�����Ǥ���������"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "�ۤ��Τ��ȤСʥ��󥹥ȡ��볫�ϻ���������ΤȤ��̤Τ��ȤСˤ�˾��\n"
-#~ "�ʤ顢��ΰ�����������Ǥ����������������֤Ȥ��ˤϡ��������פ�\n"
-#~ "���٤Ф������礦�֤Ǥ���"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "����:\n"
-#~ "\n"
-#~ "  - �������ޥ���: GNU/Linux �˾ܤ�����С���ʬ�Υޥ���μ�ʻȤ�����\n"
-#~ "    ���碌�����Ӥޤ��礦���ܤ����ϰʲ��򻲾Ȥ��Ƥ���������\n"
-#~ "\n"
-#~ "\n"
-#~ "  - �������ѡ���: �����������GNU/Linux�˾ܤ����ͤ��������ü��\n"
-#~ "    ���󥹥ȡ���򤷤����������Ӥޤ����֥������ޥ�����\n"
-#~ "    �Υ��󥹥ȡ����Ʊ��������ʬ�Υ����ƥ�λȤ��������٤ޤ���\n"
-#~ "    �Ǥ⡢�����˼������ʤ��ʤ顢���Фˤ���ϻȤ�ʤ��Ǥ���������"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "�ޥ���λȤ����������ʤ���ϤĤޤꡢ���ʤ������󥹥ȡ���������\n"
-#~ "�֥�������פ��֥������ѡ��ȡפ��������Ȥ��ޤ��ˤϰʲ����̤�:\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ������ơ������: �ޥ�����˥ǥ����ȥåפΰ������ѤǻȤ���\n"
-#~ "    �顢���������Ǥ������������ե�����̳���������Խ��ʤɤǥޥ���\n"
-#~ "    ��Ȥ����ˤϤ���Ǥ�������ѥ���䳫ȯ�ѤΥ桼�ƥ���ƥ�����\n"
-#~ "    ��ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ��ȯ��: ̾���ΤȤ��ꡣ���Υޥ�����˥��եȳ�ȯ�ǻȤ��Τʤ顢\n"
-#~ "    ���������Ǥ��������������������ɤ򥳥�ѥ��롢�ǥХå�������\n"
-#~ "    �����ꡢ���եȥѥå��������ä��ꤹ��Τ˻Ȥ����եȽ������٤�\n"
-#~ "    ���󥹥ȡ��뤵��ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ��������: Mandrake Linux�򥤥󥹥ȡ��뤷�褦�Ȥ��Ƥ���ޥ����\n"
-#~ "    ���������ѤǻȤ��Ĥ��ʤ餳��Ǥ����ե����륵���� (NFS��SMB)��\n"
-#~ "    �ץ�󥿥����С�Unix��lp (�饤��ץ��) �ץ��ȥ��뤫������ɥ���\n"
-#~ "    ����SMB��ͳ�ΰ����ˡ�ǧ�ڥ����� (NIS)���ǡ����١��������ФʤɤǤ���\n"
-#~ "    ���ξ��ˤϡ�KDE��GNOME�ʤɤΤ�����������ʪ�ϥ��󥹥ȡ��뤷�ޤ���"
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "�Ǥϥ��󥹥ȡ��롦���åץ��졼�ɤ������ѥå������������Ӥޤ��礦��\n"
-#~ "\n"
-#~ "������顢DrakX �Τۤ��ǡ�����򥤥󥹥ȡ��뤹�������;͵�����뤫\n"
-#~ "�����å����ޤ�����­�ʤ�ٹ��Ф��ޤ�������Ǥ�³��������С�DrakX\n"
-#~ "�ϼºݤΥ��󥹥ȡ���˿ʤߤޤ��������פǤʤ��ѥå���������Ȥ��ޤ���\n"
-#~ "�����κǸ�ˡָ��̤Υѥå�����������פȤ����Τ�����ޤ��������\n"
-#~ "���֤ȡ�1000�İʾ�Υѥå������򤺤äȸ��Ƥ������Ȥˤʤ�ޤ���..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "�����Ǥϥ��󥹥ȡ��뤷�����ѥå���������̤����٤ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "�ѥå�����������ɥ��κ����ߤˤ��륪�ץ����򥯥�å�����ȡ��ĥ꡼��\n"
-#~ "�ΤФ�����̤᤿��Ǥ��ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "�ѥå������� abc ����¤��ؤ�������С���abc��ȥ��롼�׽��ڤ��ؤ���\n"
-#~ "��������򥯥�å����Ƥ���������\n"
-#~ "\n"
-#~ "\n"
-#~ "��¸�ط��ˤĤ��Ƥηٹ𤬤���ʤ���С��ְ�¸�ط���ư�����פ�\n"
-#~ "����å����Ƥ�����������������֤ȡ�����ѥå�������������\n"
-#~ "�����顢����˰�¸����ѥå���������ޤäƲ������ޤ���"
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "�嵭�ΰ�����CD�����٤Ƥ����äƤ���С�Ok�򥯥�å����ޤ��礦��\n"
-#~ "CD����Ĥ�ʤ���С�����󥻥�򥯥�å����Ƥ���������\n"
-#~ "�긵�ˤʤ�CD������С���������򤫤�Ϥ����Ƥ���Ok�򥯥�å����ޤ���"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "�Ǥϥޥ�����ƥ��Ȥ��Ƥߤޤ��礦���ܥ����ۥ������ȤäƤߤ�\n"
-#~ "�������꤬��������Ƥ�������������ʤ�֥���󥻥�פ򥯥�å�\n"
-#~ "�����̤Υɥ饤�Ф����Ӥޤ��礦��\n"
-#~ "\n"
-#~ "\n"
-#~ "�⤷���åץ�Υޥ���ǥޥ����ܥ��󤬰�Ĥ����ʤ���С�2���ܤ�3����\n"
-#~ "�Υޥ����ܥ���򥨥ߥ塼�졼�Ȥ��륭�����Ȥ߹�碌������Ǥ��ޤ���\n"
-#~ "����� Linux ���󥽡���Ǥ� X ������ɥ� GUI �Ǥ⡢�ޥ����ε�ǽ��\n"
-#~ "�����˻Ȥ��ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "ADB �ޥ�����ȤäƤ���Ȥ��� USB �����򤷤Ƥ���������Linux �����ͥ�\n"
-#~ "�Τۤ��ǡ��ޥ����Υϡ��ɥ������Υޥåԥ󥰤򤭤���Ƚ������ޤ���"
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "�ޥ���򥤥󥿡��ͥåȤ� LAN �ˤĤʤ������ʤ顢�б�����\n"
-#~ "���ץ���������Ǥ������������������ץ������������ˡ����ΥǥХ���\n"
-#~ "���Ÿ��򤤤�ơ�DrakX �˼�ư���Ф����Ƥ���������\n"
-#~ "\n"
-#~ "\n"
-#~ "���󥿡��ͥåȤ� LAN ����³���ʤ��ʤ顢�֥ͥåȥ����Ȥ�ʤ��פ�\n"
-#~ "���Ӥޤ��礦��\n"
-#~ "\n"
-#~ "\n"
-#~ "�ͥåȥ������򤢤Ȥޤ路�ˤ��뤫�����뤤�Ϥ⤦���ꤷ����äƤ���\n"
-#~ "�ʤ�ִ�λ�פ����Ӥޤ���"
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "��ǥब���ФǤ��ޤ��󡣥�ǥ�ΤĤʤ��äƤ��륷�ꥢ��ݡ��Ȥ�\n"
-#~ "����Ǥ���������\n"
-#~ "\n"
-#~ "\n"
-#~ "���ͤޤǤˡ��ǽ�Υ��ꥢ��ݡ��ȡʥ�����ɥ����Ǥϡ�COM1�סˤϡ�\n"
-#~ "Linux �Ǥϡ�ttyS0�פȸƤФ�ޤ���"
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "����������륢�åפ�����򤷤ޤ����������Ϥ��Ƥ������狼��ʤ���\n"
-#~ "�ޤ��ϼ������ʤ��Ȥ��ϡ�����������򥤥󥿡��ͥåȤΥץ��Х�����\n"
-#~ "����äƤ���������DNS (�͡��ॵ����) ����򤳤������Ϥ��ʤ���С�\n"
-#~ "���ξ������³���˥��󥿡��ͥåȤΥץ��Х��������������ޤ���"
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "��ǥब���դ��ʤ顢�����Ÿ�������ơ�DrakX�˼�ưŪ�˸��Ф����Ƥ���������"
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "��ǥ���Ÿ�������ơ���������Τ�����Ǥ���������"
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "��ξ������������ɤ����狼��ʤ������뤤�ϲ������Ϥ��뤫\n"
-#~ "�狼��ʤ���С�����������򥤥󥿡��ͥåȤΥץ��Х�����ISP) ��\n"
-#~ "����äƤ���������DNS (�͡��ॵ����) ����򤳤������Ϥ��ʤ���С�\n"
-#~ "���ξ������³���˥��󥿡��ͥåȤΥץ��Х��������������ޤ���"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "�Ǥϡ�ɬ�פʤ�ۥ���̾������Ƥ����������⤷�狼��ʤ�����\n"
-#~ "�������Ϥ��Ƥ������狼��ʤ���С�ISP������������򶵤�äƤ���������"
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "����Ǥϥͥåȥ���ǥХ��������ꤷ�ޤ��礦:\n"
-#~ "\n"
-#~ "  - IP ���ɥ쥹: �狼��ʤ���С��ͥåȥ�������Ԥˤ����Ƥ���������\n"
-#~ "    ���ǡּ�ư IP�� ���ץ��������֤ʤ顢���Ϥ��ʤ��Ǥ�������\n"
-#~ "\n"
-#~ "  - �ͥåȥޥ���: ��255.255.255.0�פˤ��Ƥ����Τ�̵��Ǥ����������ʤ���"
-#~ "��\n"
-#~ "�ͥåȥ�������Ԥˤ����Ƥ���������\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ��ư IP: �ͥåȥ���� BOOTP �� DHCP �ץ��ȥ����ȤäƤ�����\n"
-#~ "���Υ��ץ���������Ǥ�����������������֤ȡ���IP ���ɥ쥹�פ����\n"
-#~ "����ɬ�פϤ���ޤ��󡣼������ʤ���С��ͥåȥ�������Ԥˤ�����\n"
-#~ "����������"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "���ơ�ɬ�פʤ鼫ʬ�Υۥ���̾�����Ϥ��ޤ��礦��\n"
-#~ "�狼��ʤ����������ʤ���Хͥåȥ�������Ԥˤ����Ƥ���������"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "������ɬ�פʤ顢�ۥ���̾�����Ϥ��Ƥ����������⤷\n"
-#~ "�狼��ʤ����������ʤ���С������Ƥ����ޤ��礦��"
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "�Ǥϥ�����륢�åפ�����򤷤ޤ����������Ϥ��Ƥ������狼��ʤ���С�\n"
-#~ "ISP������������򶵤�äƤ���������"
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "�ץ�������Ȥ��ʤ顢���������ꤷ�ޤ��礦���ץ�������Ȥ����ɤ���\n"
-#~ "�狼��ʤ���С��ͥåȥ�������Ԥ�ISP�ˤ����Ƥ���������"
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "���󥿡��ͥå���³�����꤬��������С������ǰŹ�ѥå������򥤥󥹥ȡ���\n"
-#~ "�Ǥ��ޤ����ޤ��ѥå�������ȤäƤ��륵���Ȥ�����ǡ����줫�饤�󥹥ȡ���\n"
-#~ "����ѥå����������Ӥޤ���\n"
-#~ "\n"
-#~ "�ʤ��������Ȥ�����ȰŹ�ѥå�����������ϡ���ʬ�ΤȤ�����ˡ�����ˤ��ä�\n"
-#~ "��Τˤ��Ƥ���������"
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "���ơ���ʬ�ε���ˤ��碌�������ॾ��������Ӥޤ��礦��"
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "���ꤹ��ץ�󥿤ϡ���������ץ�󥿡ʤ��Υޥ����ľ�ܤĤʤ��ä���Ρˤ�"
-#~ "��\n"
-#~ "��⡼�ȥץ�� (Unix, Netware, MS Windows �Υͥåȥ����ͳ�Τ�Ρˤ�"
-#~ "��\n"
-#~ "���ޤ��ޤ���"
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "�����Ǥ���褦�ˤ������ʤ�С�CUPS �� LPR�Τɤ��餫�ΰ��������ƥ��\n"
-#~ "����Ǥ���������\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS �Ͽ����������Ϥǽ���� Unix �Ѱ��������ƥ�Ǥ� (CUPS�Ȥ����Τ�\n"
-#~ "��Common Unix Printing System�פ�ά)��Mandrake Linux�ǤϤ��줬�ǥե����\n"
-#~ "�Ǥ���\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR �ϸŤ����������ƥ�ǡ��Τ� Mandrake Linux �ǻȤäƤ��ޤ�����\n"
-#~ "\n"
-#~ "\n"
-#~ "�ץ�󥿤���äƤ��ʤ���С��֤ʤ��פ򥯥�å����ޤ��礦��"
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux �ϳƼ�Υץ�󥿤򰷤��ޤ������줾�����꤬�����äƤ��ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "�⤷�ץ�󥿤��ޥ����ľ�ܤĤʤ��äƤ���ʤ顢�֥�������ץ�󥿡פ�\n"
-#~ "���Ӥޤ��礦��\n"
-#~ "\n"
-#~ "\n"
-#~ "��⡼�Ȥ� Unix �ޥ���ˤĤʤ��ä��ץ�󥿤򥢥��������������ˤϡ�\n"
-#~ "�֥�⡼�ȥץ�󥿡פ����Ӥޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "��⡼�Ȥ� MS Windows �ޥ���ˤĤʤ��ä��ץ�󥿤򥢥���������ʤ�\n"
-#~ "(���뤤�� SMB �ץ��ȥ����Ȥä� Unix �ޥ���Υץ�󥿡ˡ����֤Τ�\n"
-#~ "��SMB/Windows 95/98/NT�פǤ���"
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "�����Ǥޤ��ץ�󥿤��Ÿ�������ơ�DrakX �����ФǤ���褦�ˤ��ޤ��礦��\n"
-#~ "\n"
-#~ "����ˤ����Ĥ������פ�ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "   * �ץ��̾: �ץ�󥿤Υ��ס���ϡ��ǥե���ȤΥץ��̾�Ȥ��ơ�lp��"
-#~ "��\n"
-#~ "     �Ȥ��ޤ����������lp�פȤ����ץ�󥿤�ɬ�פǤ����⤷�ץ�󥿤�\n"
-#~ "     ��������Ǥ⡢̾����ʣ�����������ޤ��������������ѥ���ʸ���֡á�"
-#~ "��\n"
-#~ "     ���ڤ�Ф����ΤǤ����Ǥ����顢��äȰ�̣�Τ���̾���ˤ�������С�\n"
-#~ "     �����ޤ����äƤ��ޤ��礦����My printer|lp�פȤ�����硣\n"
-#~ "     ̾���ˡ�lp�פΤĤ����ץ�󥿤��ǥե���ȤΥץ�󥿤ˤʤ�ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ����: ����Ϥʤ��Ƥ⤤���Ǥ�����ʣ���Υץ�󥿤���äƤ����ꡢ�ۤ�"
-#~ "��\n"
-#~ "     �ޥ��󤬤��Υץ�󥿤˥�����������Ȥ��������Ǥ���\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ���: �⤷�ץ�󥿤ξ��ˤĤ��ƾ�������줿����С�������\n"
-#~ "     ���Ϥ��ޤ��礦�ʡ��󳬡פȤ������ʵ��ҤǤ��ޤ��ޤ���ˡ�\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "�����Ǥ���������������Ϥ��Ƥ���������\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ���塼��̾��: �ץ�󥿤Υ��ס���ϡ��ǥե���ȤǤϡ�lp�פ�Ȥ���"
-#~ "����\n"
-#~ "     �������lp�פȤ����ץ�󥿤�ɬ�פǤ���\n"
-#~ "     �⤷�ץ�󥿤���������Ǥ⡢̾����ʣ�����������ޤ��������������\n"
-#~ "     �ѥ���ʸ���֡áפǶ��ڤ�Ф����ΤǤ����Ǥ����顢��äȰ�̣�Τ���\n"
-#~ "     ̾���ˤ�������С������ޤ����äƤ��ޤ��礦����My printer|lp�פ�\n"
-#~ "     ������硣\n"
-#~ "     ̾���ˡ�lp�פΤĤ����ץ�󥿤��ǥե���ȤΥץ�󥿤ˤʤ�ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ���ס���ǥ��쥯�ȥ�: ���Υǥ��쥯�ȥ�˰�������֤���¸����ޤ���\n"
-#~ "     ����Ȥ��٤����狼��ʤ���Хǥե���ȤΤޤޤˤ��Ƥ����ޤ��礦\n"
-#~ "\n"
-#~ "\n"
-#~ "   * �ץ����³: �ץ�󥿤��ޥ����ľ�ܤĤʤ��äƤ�����ϡ�\n"
-#~ "     �֥�������ץ�󥿡פ����Ӥޤ�����⡼�Ȥ�Unix�ޥ����Υץ�󥿤�\n"
-#~ "     �Ȥ��ˤϡ��֥�⡼��lpd�ץ�󥿡פ����Ӥޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "     ��⡼�ȤΥ�����ɥ����ޥ���ʤޤ���SMB �ץ��ȥ�����Ѥ�Unix�ޥ���\n"
-#~ "     ��Υץ�󥿤򥢥���������ˤϡ���SMB/Windows 95/98/NT�פ����Ӥ�"
-#~ "����\n"
-#~ "\n"
-#~ "\n"
-#~ "     NetWare �ͥåȥ����Υץ�󥿤򥢥�������������С�\n"
-#~ "     ��NetWare�פ����Ӥޤ���\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "�ץ�󥿤����ФǤ��ޤ��󡣥ץ�󥿤���³���줿�ǥХ���̾�����Ϥ���\n"
-#~ "����������\n"
-#~ "\n"
-#~ "\n"
-#~ "���ʤߤˡ��ץ�󥿤ϤդĤ��Ϻǽ�Υѥ���ݡ��ȤˤĤʤ��äƤ����Τ�"
-#~ "����\n"
-#~ "�����GNU/Linux �Ǥϡ�/dev/lp0�פ�����������ɥ����Ǥϡ�LPT1�פˤʤ�ޤ���"
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "������ΰ������鼫ʬ�Υץ�󥿤�����Ǥ���������"
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "��ʬ�Υץ�󥿤ˤ��ä������������ץ���������Ǥ���������\n"
-#~ "�ʤˤ����֤��狼��ʤ���С��ץ�󥿤λ����򸫤Ƥ���������\n"
-#~ "\n"
-#~ "\n"
-#~ "���Υ��ƥåפ������ƥ��ȤǤ��ޤ��������줬�פ��̤�˵�ǽ���ʤ����\n"
-#~ "�������Ѥ����ޤ���"
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "�Ǥ�Mandrake Linux�����ƥ��root�ѥ���ɤ����ꤷ�ޤ��礦��\n"
-#~ "�ѥ���ɤ� 2 �����Ϥ��ơ������ץߥ����ʤ����ɤ������ǧ���ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "Root�Ȥ����Τϥ����ƥ�δ����Ԥǡ������ƥ��������Ѥ�����ͣ���\n"
-#~ "��ʪ�Ǥ����Ǥ����顢���Υѥ���ɤ����Ϥ���Ȥ������դ��Ƥ���������\n"
-#~ "root���¤������˻Ȥ��ȡ����Υ����ƥ�䡢�ͥåȥ���ǤĤʤ��ä�¾��\n"
-#~ "�����ƥ�䤽�Υǡ����˽���ʴ�����ڤܤ����Ȥˤʤ꤫�ͤޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "�ѥ���ɤϡ�����ե��٥åȤ�����򺮤�����Τˤ��ơ�����Ǥ� 8 ʸ��\n"
-#~ "ɬ�פǤ���*���Ф�*���äƤ������ꤷ�ƤϤ����ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "�Ǥ�Ĺ���������䤳���������ꤹ��ѥ���ɤ����Ǥ��衣��ʬ�Ǥ�\n"
-#~ "�ڤ˻פ�������ɬ�פ�����ޤ���"
-
-#~ msgid ""
-#~ "If your network uses the LDAP (or NIS) protocol for authentication, "
-#~ "select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "�ͥåȥ����ǧ�ڤ� LDAP (�ޤ��� NIS) ��ȤäƤ���ʤ顢ǧ�ڤΤȤ�����\n"
-#~ "\"LDAP\" (�ޤ��� \"NIS\") ������Ǥ����������狼��ʤ���С��ͥåȥ��\n"
-#~ "�δ����Ԥˤ����ޤ��礦��\n"
-#~ "\n"
-#~ "�⤷����ԥ塼���������ԤĤ��ͥåȥ���ˤĤʤ��äƤ��ʤ��ʤ�\n"
-#~ "ǧ�ڤˤ� \"��������ե�����\" �����Ӥޤ��礦��"
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "�ǤϤ����ǡ����̾�Ρץ桼����������Ȥ�Ĥ���ޤ���\n"
-#~ "����ϡ��ø��ץ桼����������Ȥ�root �ȤϤ������ޤ������Υ����ƥ��\n"
-#~ "�Ȥ��ͤ����ˡ����줾���̡��Υ�������Ȥ�Ĥ���褦�ˤ��ޤ����ƥ�����\n"
-#~ "��Ȥ��ȼ��δĶ�����ʥ���ե��å��Ķ����ץ����������ʤɡˤ������\n"
-#~ "���줾�켫���Ρ֥ۡ���ǥ��쥯�ȥ�פ���äƤ����ˤ��������������¸\n"
-#~ "���Ƥ����ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "�ޤ��ϼ�ʬ�ѤΥ�������Ȥ�Ĥ��äƤ������������桼�������ʤ���ͤǤ⡢\n"
-#~ "�դ��󥷥��ƥ��Ȥ��Ȥ��ˤϡ�root��ȤäƤ�*�����ޤ���*\n"
-#~ "�������ȡ��������ƥ���Υꥹ�����������礭���ʤ�ޤ�������ä�\n"
-#~ "���������ץߥ��ǡ������ƥ������������ФƤ��ޤ��衣\n"
-#~ "\n"
-#~ "\n"
-#~ "�������äơ��դĤ��Ϥ����ǤĤ���桼����������Ȥǥ����ƥ��Ȥ��ޤ���\n"
-#~ "����root�ǥ������󤹤�Τϡ������ƥ�����ȥ��ƥʥ󥹤ΤȤ������Ǥ���"
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "��ư�ǥ�����������Ȥ�Ĥ��äƤ����Ƥ����������ޥ����ư�Ǥ��ʤ�\n"
-#~ "�ʤä��顢���줬�ƥ��󥹥ȡ��뤻���˥ǥ�������ߤ�ͣ��μ��ʤǤ���"
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO �� grub �μ��ץ��ץ����ϰʲ��ΤȤ���Ǥ�:\n"
-#~ "  - �֡��ȥǥХ���: �֡��ȥ���������ĥǥХ���̾������ʤ��Ȥ��Хϡ���\n"
-#~ "�ǥ������Υѡ��ƥ������ˡ��������ʤ��¤ꡢ��/dev/hda�פ����Ӥޤ��礦��\n"
-#~ "\n"
-#~ "\n"
-#~ "  - �ǥե���ȥ��᡼����ư���Ԥ�����: �֡��ȥ��������ǽ�Υ��᡼����ư\n"
-#~ "����ޤǤ��Ԥ����֤�1/10��ñ�̤ǻ��ꤷ�ޤ�������ϡ������ܡ��ɤ�ͭ����\n"
-#~ "�ʤäƤ����˥ϡ��ɥǥ��������鵯ư���륷���ƥ�ʤɤ������Ǥ�������\n"
-#~ "���Ԥ����֡פ�̵�������ä��ꥼ�����ä��ꤷ���顢�֡��ȥ��������Ԥ��ޤ�"
-#~ "��\n"
-#~ "\n"
-#~ "\n"
-#~ "  - �ӥǥ��⡼�ɡ���ư���˻Ȥ� VGA �ƥ����ȥ⡼�ɤ���ꤷ�ޤ����Ȥ����"
-#~ "��\n"
-#~ "�ʲ����ͤǤ���\n"
-#~ "\n"
-#~ "    * �Ρ��ޥ�: �̾�� 80x25 �Υƥ����ȥ⡼��\n"
-#~ "\n"
-#~ "    * <����>:  �������б������ƥ����ȥ⡼��\n"
-#~ "\n"
-#~ "  - ��ư�Τ��Ӥ� \"/tmp\" �򥯥ꥢ: �����ƥ൯ư���� \"/tmp\" ������ե���"
-#~ "���ǥ��쥯�ȥ��\n"
-#~ "�õ������Ф��Υ��ץ��������Ӥޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ɬ�פ˱����Ƹ�̩�� RAM ����: ��ǰ�ʤ��顢BIOS �˥ޥ����� RAM ��\n"
-#~ "���Τ��̤򤭤���ˡ�����줵��Ƥ��ޤ��󡣤��Τ��� Linux �ϡ�RAM��\n"
-#~ "�̤����Τ˸��ФǤ��ʤ����⤷��ޤ��󡣤��ξ�硢���������Τ� RAM ��\n"
-#~ "�̤򤳤��ǻ���Ǥ��ޤ����ʤ������Ф��줿RAM�ȼºݤ�RAM�� 2-4 MB �ۤ�\n"
-#~ "����Ƥ���ΤϤޤä�������ʤ������ʤ��ȤǤ���"
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO ��SPARC�ѤΥ֡��ȥ������Ǥ�������ԥ塼�����GNU/Linux\n"
-#~ "�ʤɳƼ�OS��ư�Ǥ��ޤ���\n"
-#~ "���̤ϡ�������OS�ϼ�ưŪ�ˤ�����ȸ��Ф���ƥ��󥹥ȡ��뤵��ޤ���\n"
-#~ "���줬����ʤ顢�����Ǽ�ư�ǥ���ȥ���ɲä��ޤ��礦���ѥ�᡼����\n"
-#~ "�ޤ������ʤ��褦���դ��Ƥ���������\n"
-#~ "\n"
-#~ "\n"
-#~ "¾��OS�ˤ�¾�οͤ����������Ǥ��ʤ��褦�ˤ��������Ȥ⤢��ޤ�������\n"
-#~ "���ˤϤ���OS�Υ���ȥ�������Ƥ����ޤ��礦�����������ξ��ϡ�\n"
-#~ "����OS��Ȥ��Ȥ��ˤϵ�ư�ǥ��������פ�ޤ��衪"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO �μ��ץ��ץ����ϰʲ��ΤȤ���Ǥ�:\n"
-#~ "  - �֡��ȥ�������Ƴ��: GNU/Linux ��ư����Τ�ɬ�פȤʤ������֤����"
-#~ "��\n"
-#~ "����Ƥ����������ʤˤ򤹤�Ф������Ϥä����ʬ����ʤ����ϡ�\n"
-#~ "�֥ɥ饤�֤κǽ�Υ�����(MBR)�פ����Ӥޤ��礦��\n"
-#~ "\n"
-#~ "\n"
-#~ "  - �ǥե���ȥ��᡼����ư���Ԥ�����: �֡��ȥ��������ǽ�Υ��᡼����ư\n"
-#~ "����ޤǤ��Ԥ����֤�1/10��ñ�̤ǻ��ꤷ�ޤ�������ϡ������ܡ��ɤ�ͭ����\n"
-#~ "�ʤäƤ����˥ϡ��ɥǥ��������鵯ư���륷���ƥ�ʤɤ������Ǥ�������\n"
-#~ "���Ԥ����֡פ�̵�������ä��ꥼ�����ä��ꤷ���顢�֡��ȥ��������Ԥ��ޤ���"
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "�Ǥ�X������ɥ������ƥ������򤷤ޤ��礦�������GNU/Linux GUI (����ե���"
-#~ "��\n"
-#~ "�桼�����󥿡��ե������ˤγ˿���ʬ�Ǥ������Τ���ˤϤޤ����ӥǥ������ɤ�\n"
-#~ "��˥�������򤷤ޤ����������桢�ۤȤ�ɤϼ�ư������Ƥ���Τǡ��̾�ʤ�\n"
-#~ "ñ�ˡ���̤򸫤Ƥ��������ǧ��������Ǥ��ߤޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "���꤬����ä��顢X������������ޤ��ʤ��ʤ�����������ʤ�DrakX��̿�ᤷ��"
-#~ "��\n"
-#~ "�¤�ˡ���������꤬�����������ǧ�Ǥ��ޤ����������ʤ���С���äƤ���\n"
-#~ "���ʤ����ޤ�������ϲ��٤Ǥ⹥���ʤ����Ǥ��ޤ���"
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "X �����꤬����������С����Υ��ץ�����Ȥäơ�X������ɥ������ƥ��\n"
-#~ "���������ꤷľ���Ƥ���������"
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "����ե����롦�������󤬹����ʤ顢�֤Ϥ��פ����Ӥޤ��������Ǥʤ����\n"
-#~ "�֤������פ����Ӥޤ���"
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "�ޥ���Υ������ƥ��Υ�٥�����٤ޤ����ܤ��������ϥޥ˥奢��򻲾ȡ�\n"
-#~ "����Ū�ˤϡ��ɤ�����٤Ф������狼��ʤ���Хǥե���ȤΤޤޤˤ��ޤ���\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "�����ƥ��Ƶ�ư���ޤ���\n"
-#~ "\n"
-#~ "�Ƶ�ư�����顢������ Mandrake Linux �����ƥब��ưŪ�ˤ���������ޤ���\n"
-#~ "�̤�OS�򤿤����������Ȥ��ˤϡ��ɲä��������ɤ�Ǥ���������"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "linux��ʣ���Ѥˡ���ư���󥹥ȡ���ǥ�������Ĥ���ޤ�����"
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "�������ʥץ�����ޡ�"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "�����Х����ʥץ�����ޡ�"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL������"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remote queue"
-#~ msgstr "��⡼�ȥ��塼"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "��⡼�ȥ��塼̾������ޤ���"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "�����Ǥϡ�����֤�ץ�󥿤��������ˡ�Ǥ�դΥ��ޥ�ɤ˥ѥ��פ���褦�����"
-#~ "���ޤ���"
-
-#~ msgid "Command line"
-#~ msgstr "���ޥ�ɥ饤��"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "���ޥ�ɥ饤������Ϥ��Ƥ���������"
-
-#~ msgid "Option %s->{ARGS}[%s]{'comment'} must be an integer number!"
-#~ msgstr "Option %s->{ARGS}[%s]{'comment'} �������ˤ��Ƥ�������!"
-
-#~ msgid "Option %s->{ARGS}[%s]{'comment'} must be a number!"
-#~ msgstr "Option %s->{ARGS}[%s]{'comment'} �Ͽ����ˤ��Ƥ�������!"
-
-#~ msgid "Option %s->{ARGS}[%s]{'comment'} out of range!"
-#~ msgstr "Option %s->{ARGS}[%s]{'comment'} ���ϰϳ��Ǥ�!"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "��⡼�� CUPS �����Фξ�硢�����Ǥϥץ�󥿤���������פǤ���\n"
-#~ "�ץ�󥿤ϼ�ư���Ф���ޤ��������������Ф��̤Υͥåȥ�����\n"
-#~ "����ȥ���Ǥ������ΤȤ��ϡ�CUPS�����Ф�IP���ɥ쥹�ȡ�ɬ�פʤ�\n"
-#~ "�ݡ����ֹ����ꤷ�ޤ��礦��"
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "�ץ�󥿤�̾���ȥ����Ȥ����Ϥ��Ƥ�������"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "����ե���������Ƥ����Ǥ��ޤ���"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "����ե����뤬�ѤǤ�"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "�Ϥ�ץ��ե�����̾:"
-
-#~ msgid "Adapter"
-#~ msgstr "�����ץ�"
-
-#~ msgid "Disable network"
-#~ msgstr "�ͥåȥ����̵���ˤ���"
-
-#~ msgid "Enable network"
-#~ msgstr "�ͥåȥ����ͭ���ˤ���"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "�ͥåȥ���δƻ�"
-
-#~ msgid "Profile "
-#~ msgstr "�ץ������� "
-
-#~ msgid "Statistics"
-#~ msgstr "����"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "����®�١�"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "����®�١�"
-
-#~ msgid "Logs"
-#~ msgstr "����"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "���󥿡��ͥåȤ���³"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "���󥿡��ͥåȤ�������"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "���󥿡��ͥåȤ�������Ǥ˼���"
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "���󥿡��ͥåȤ�������Ǵ�λ"
-
-#~ msgid "Connection complete."
-#~ msgstr "��³��λ"
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "��³���ԡ�\n"
-#~ "Mandrake ����ȥ����륻�󥿡���������ǧ���Ƥ���������"
-
-#~ msgid "sent: "
-#~ msgstr "�����Ѥߡ�"
-
-#~ msgid "received: "
-#~ msgstr "�����Ѥߡ�"
-
-#~ msgid "average"
-#~ msgstr "ʿ��"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "�������ޥ�����ƥ��Ȥ��Ƥߤޤ��礦���ܥ����ۥ������ȤäƤߤơ�\n"
-#~ "���꤬����Ǥ��������Ƥ�������������ʤ�֥���󥻥�פ򲡤��ơ�\n"
-#~ "�ɥ饤�Ф�����ľ���Ƥ���������"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (�ޤ��� ADSL) ��³"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "CUPS �ǥץ�󥿤򥢥���������ʤ顢ľ�� URI �����Ǥ��ޤ���"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "ASCII�ƥ��ȥڡ�����������Ƥߤ�"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "PostScript�ƥ��ȥڡ�����������Ƥߤ�"
-
-#~ msgid "Paper Size"
-#~ msgstr "�ѻ極����"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "����֤θ�ǥڡ����ӽФ��ޤ�����"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint�ɥ饤�Х��ץ����"
-
-#~ msgid "Color depth options"
-#~ msgstr "�����٥��ץ����"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "�ƥ����Ȥ�PostScript�ǰ������ޤ�����"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "ʸ���Υ��㥮����ʤ����ޤ�����"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "���ϥڡ���������Υڡ�����"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "������;���ݥ���ȿ���1/72������ˤǻ���"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "�岼��;���ݥ���ȿ���1/72������ˤǻ���"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "����¾ GhostScript���ץ����"
-
-#~ msgid "Extra Text options"
-#~ msgstr "����¾�ƥ����ȥ��ץ����"
-
-#~ msgid "Reverse page order"
-#~ msgstr "�Ǹ�Υڡ����������"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS ����"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "��⡼�ȥץ�󥿤���³������Ǥ�������"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "�ץ�󥿤Ϥ��줾��̾�����פ�ޤ��ʤ��Ȥ���lp)��\n"
-#~ "�ۤ��ˤ⡢�ץ�󥿤μ����ޥ���ؤΤĤʤ��꤫���ʤɤΥѥ�᡼����\n"
-#~ "����Ǥ��ޤ������Υץ�󥿤Ϥʤ�Ȥ���̾���ˤ��ޤ����� �����ƥޥ���ȤϤ�"
-#~ "���Ĥʤ��äƤ��ޤ�����"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "������ץ��ȥ��塼(�ץ��ȥ���֤����������)��̾��(�����Ƥ���\n"
-#~ " lp)�Ȥ���˴�Ϣ���Ƥ��륹�ס���ǥ��쥯�ȥ꤬ɬ�פǤ������Υ��塼��\n"
-#~ "�Ȥ�̾���ȥǥ��쥯�ȥ�ϲ��ˤ��ޤ�����\n"
-#~ "�ޤ��ץ�󥿤Ϥɤ���³����Ƥ��ޤ�����"
-
-#~ msgid "Name of queue"
-#~ msgstr "���塼��̾����"
-
-#~ msgid "Spool directory"
-#~ msgstr "���ס���Υǥ��쥯�ȥꡧ"
-
-#~ msgid "Disable"
-#~ msgstr "̵����"
-
-#~ msgid "Enable"
-#~ msgstr "ͭ����"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "�⥻�����ƥ������ƥ�ˤ�������С��֥���ɥ��ե������Ȥ��פ�\n"
-#~ "��MD5 �ѥ���ɤ�Ȥ��פ�����Ǥ���������"
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "�⤷�ͥåȥ���� NIS ��ȤäƤ���ʤ��NIS ��Ȥ��פ�����Ǥ���������\n"
-#~ "�狼��ʤ���Хͥåȥ�������Ԥˤ����Ƥ���������"
-
-#~ msgid "yellow pages"
-#~ msgstr "���������ڡ���"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "�ץ��Х����� dns 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "�ץ��Х����� dns 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "�ɤΤ褦�ˤ��ƥ��󥿡��ͥåȤ���³���ޤ���?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "�ե������Բ�ǽ��"
-
-#~ msgid "Configure..."
-#~ msgstr "������..."
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "���Ф줿��������%d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "��³�򳫻�..."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "���ε�ư������ץȤ�USB�ޥ����ѤΥ⥸�塼�������ɤ��ޤ���"
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Lilo ������/Grub"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "��ư����������"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "�������󥿡��ͥå���³�����꤬�����ޤ������ۤ��Υޥ���\n"
-#~ "���Υޥ����ͳ�ǥ��󥿡��ͥåȤ���³����褦������Ǥ��ޤ�\n"
-#~ "�����������륨�ꥢ�ͥåȥ�� (LAN) ��Ĥ���ˤϡ����ѤΥͥåȥ������"
-#~ "�ץ����פ�ޤ���\n"
-#~ "\n"
-#~ "���󥿡��ͥå���³�ζ�ͭ�����ꤷ�ޤ�����\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "���󥿡��ͥå���³��ͭ�桼�ƥ���ƥ��ؤ褦������"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "��¸�ط��μ�ư���"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "LILO/GRUB ������"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "��ư�ǥ���������"
-
-#~ msgid "Choice"
-#~ msgstr "����"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "��ʿ�Ǥ��줤�˸�����aurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "���跿�ο�ľ�� aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "g��˥�"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "�ǤϤ���¾�Υ��ץ����򤤤��Ĥ����ꤷ�ޤ��礦��\n"
-#~ "\n"
-#~ "  - �ϡ��ɥǥ�������Ŭ���򤹤�: ���Υ��ץ����ϡ��ϡ��ɥǥ�������ǽ\n"
-#~ "    ��������Ƥ���ޤ��������٤ʥ桼�����ѤǤ��������Υ��åץ��åȤ���\n"
-#~ "    �ǥ�������Υǡ���������ޤ��������ͥ�Ǥ⡢���ä����åץ��åȤ�\n"
-#~ "    �ɥ饤�֤Υ֥�å��ꥹ�Ȥϻ��äƤ��ޤ������ˤ��ܤˤ��������ʤ����\n"
-#~ "    �򤱤��ۤ���̵��Ǥ���\n"
-#~ "\n"
-#~ "\n"
-#~ "  - �������ƥ���٥������: �����ƥ�Υ������ƥ���٥�����٤ޤ���\n"
-#~ "    �ܤ����ϥޥ˥奢��򻲾Ȥ��Ƥ�������������Ū�ˤϡ��褯�狼��ʤ���\n"
-#~ "    �Хǥե���ȤΤޤޤǤ����ޤ��礦��\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ɬ�פʤ����Τ�RAM������: ��ǰ�ʤ��餤�ޤΥѥ�����������Ǥϡ�BIOS��\n"
-#~ "    �����ƥ���RAM���̤ˤĤ��ƤޤȤ��ʹ����ˡ������ޤ��󡣤��η�̡�\n"
-#~ "    Linux�ϥޥ�����RAM�򤭤���ȸ��ФǤ��ʤ����Ȥ�����ޤ������ξ��\n"
-#~ "    �ˤϡ��������̤���ꤷ�ޤ���\n"
-#~ "    ���ա� 2 or 4 MB ���餤�Τ���ϵ��ˤ��ʤ�������פǤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ��ࡼ�Х֥��ǥ����μ�ư�ޥ����: ��ࡼ�Х֥�ɥ饤�֡�CD-ROM��\n"
-#~ "    �ե��åԡ���ZIP�ʤɡˤ��mount�פ��umount�ץ��ޥ�ɤǼ�ư�ޥ����\n"
-#~ "    ����Τ����ݤʤ顢���Υ��ץ��������Ӥޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "* ��ư�Τ��Ӥˡ�/tmp�פ����: �⤷�����ƥ��ư���뤿�Ӥˡ�/tmp�פ�\n"
-#~ "�ե������ǥ��쥯�ȥ��õ��ˤϡ����Υ��ץ���������Ǥ���������\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ��ư����Num Lock�򥪥�ˤ���: ��ư����Number Lock�򥪥�ˤ��������\n"
-#~ "    ���Υ��ץ��������Ӥޤ������ա���åץȥåפǤϡ����Υ��ץ�����\n"
-#~ "    ����ˤ��ƤϤ����ޤ��󡣤ޤ���X������ɥ��Ǥ�Num Lock�ϻȤ��ʤ���\n"
-#~ "    �Ȥ�����ޤ��ˡ�"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr "�����ʤ������᡼�������Ϥޤ��Ǥ��ޤ��󡣤��ƼϤ�"
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "�ͥåȥ�����ꥦ�������ɤؤ褦������\n"
-#~ "�ɤΥ���ݡ��ͥ�Ȥ����ꤷ�����Ǥ���?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "���󥿡��ͥå�/�ͥåȥ���ؤΥ�������"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "����¾������"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "����¾�μ���"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "�����ѡ��ޥ���ȤϹ⤤�������ƥ���٥�ǤϻȤ��ޤ���"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "����: ���Υ������ƥ���٥�Ǥϡ����󥽡���ǤΥ롼�ȥ��������\n"
-#~ "���Ĥ���ޤ���\n"
-#~ "root �ˤʤꤿ���Ȥ��ϡ��桼���ǥ������󤷤ơ�su�פ�Ȥ�ɬ�פ�����ޤ���\n"
-#~ "����Ū�ˤϡ������Ф�����������ޥ����Ȥ���ȴ��Ԥ����ʤ�����Ǥ���\n"
-#~ "�ٹ𤷤ޤ����衣"
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "���ա�numlock ��ͭ���ˤ���ȡ������Ĥ��Υ������ȥ����������̤�ʸ��\n"
-#~ "�Τ����˿������֤��ޤ�(�㡧��p�פ��ǤĤȡ�6�פ��֤��ޤ�)"
-
-#~ msgid "not connected"
-#~ msgstr "��³����Ƥ��ޤ���"
-
-#~ msgid "Actions"
-#~ msgstr "�դ�ޤ�"
-
-#~ msgid "Scientific applications"
-#~ msgstr "�ʳإ��ץꥱ�������"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "�����С��ե�����/����/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "������DNS/DHCP"
-
-#~ msgid "First DNS Server"
-#~ msgstr "�ե������� DNS ������"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "������� DNS ������"
-
-#~ msgid "using module"
-#~ msgstr "�⥸�塼������"
-
-#~ msgid "Development, Database"
-#~ msgstr "�ǡ����١�����ȯ��"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "��ȯ������Ķ�"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "��ȯ�ѡ�ɸ��ġ���"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "�ٹ�:\n"
-#~ "�¹�����ѹ���Ŭ�Ѥ���ȡ�X �Ķ�������å��夹�뤫�⤷��ޤ���"
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "³����ʤ顢%s �Ķ��򥷥�åȥ����󤷤ޤ�"
-
-#~ msgid "eth%s"
-#~ msgstr "eth%s"
-
-#~ msgid "loopback"
-#~ msgstr "�롼�ץХå�"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "�ɤΥ֡��ȥ�������Ȥ��ޤ���"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Ƴ������ե��å�"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "��ǥ�򸡺����ޤ�����"
-
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "ISDN ��³������"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "���󥿡��ͥå���³��̵���ˤ���"
-
-#~ msgid "Configure local network"
-#~ msgstr "LAN ����"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "���󥿡��ͥå���³���꡿LAN ����"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "��������ͥåȥ��������ѤߤǤ���\n"
-#~ "�ʲ��򤷤����Ǥ�����"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "���������ɤ�Ȥä�������..."
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "�������"
-
-#~ msgid "Multimedia"
-#~ msgstr "�ޥ����ǥ���"
-
-#~ msgid "Sciences"
-#~ msgstr "�ʳ�"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "xchat, licq, gaim�ʤɤΥ���å��ѥ��ե� (IRC �䥤�󥹥���ȥ�å�����) ��"
-#~ "�ե�����ž���ġ���"
-
-#~ msgid "Communication facilities"
-#~ msgstr "�̿���Ϣ"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "���󥿡��ͥåȥġ���"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "�ǡ����١������饤����Ȥȥ����� (mysql, postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "��ȯ�� C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "�����ॾ��������"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "�ͥåȥ�������ץ� 1��eth0��"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "�ʥǡ���������뤪���줬����ޤ���"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "��ư����num lock�򥪥�ˤ���"
-
-#~ msgid "Confirm Password"
-#~ msgstr "�ѥ���ɤ�����"
-
-#~ msgid "DNS server:"
-#~ msgstr "DNS ������:"
-
-#~ msgid "Gateway device:"
-#~ msgstr "�����ȥ������ǥХ���:"
-
-#~ msgid "default"
-#~ msgstr "�ǥե����"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "�����ƥ�λȤ���������Ǥ���������"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "���󥹥ȡ��뤹�륵����������Dz�����"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "diskdrake��Ȥ�"
-
-#~ msgid "Customized"
-#~ msgstr "�������ޥ���"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "���ʤ��������˥ۥ�ȤΥ������ѡ��ȤǤ��礦�ͤ���\n"
-#~ "��������֤ȡ����Ϥʤ����ˤ��餯�����ʤޤͤ��Ǥ����㤤�ޤ��衣\n"
-#~ "�֥ѥ���ɤ򥷥�ɥ��ˤ��ޤ����פȤ��ä������֤���ޤ��� ���Τ褦�ʼ�"
-#~ "��˥ۥ�Ȥ����������Ǥ�����"
-
-#~ msgid "Use shadow file"
-#~ msgstr "����ɥ��ե������Ȥ�"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "MD5 �ѥ���ɤ�Ȥ�"
-
-#~ msgid "Search"
-#~ msgstr "����"
-
-#~ msgid "Package"
-#~ msgstr "�ѥå�����"
-
-#~ msgid "Tree"
-#~ msgstr "�ĥ꡼"
-
-#~ msgid "Sort by"
-#~ msgstr "�ʲ��Υ����ǥ����ȡ�"
-
-#~ msgid "Category"
-#~ msgstr "����"
-
-#~ msgid "Installed packages"
-#~ msgstr "���󥹥ȡ���ѤߤΥѥå�����"
-
-#~ msgid "Available packages"
-#~ msgstr "���󥹥ȡ��뤷�Ƥ��ʤ��ѥå�����"
-
-#~ msgid "Show only leaves"
-#~ msgstr "�ܺ���ʬ����ɽ��"
-
-#~ msgid "Expand all"
-#~ msgstr "�ĥ꡼�����ˤΤФ�����"
-
-#~ msgid "Collapse all"
-#~ msgstr "�ĥ꡼�����˽̤��"
-
-#~ msgid "Add location of packages"
-#~ msgstr "�ѥå������ΰ��֤��ɲ�ɽ��"
-
-#~ msgid "Update location"
-#~ msgstr "���åץǡ��Ȥ������"
-
-#~ msgid "Find Package"
-#~ msgstr "�ѥå������θ���"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "�ʲ��Υե������ޤ�ѥå������θ�����"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "���󥹥ȡ���Ѥߤ�̤���󥹥ȡ�����ڤ��ؤ�"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "�ѥå������ΰ�¸�ط���Ĵ�٤Ƥ��ޤ�"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "�ʲ��Υѥå������ϥ��󥤥󥹥ȡ���Ǥ��ޤ���"
-
-#~ msgid "Regexp"
-#~ msgstr "����ɽ��"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "�ɤΥѥå������򤵤����Ƥ��ޤ���"
-
-#~ msgid "No match"
-#~ msgstr "���פ����Τ�����ޤ���"
-
-#~ msgid "No more match"
-#~ msgstr "����ʾ�ϤߤĤ���ޤ���"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake �ϸ��ߡ�������­�ˤʤäƤ��ޤ���\n"
-#~ "���rpmdrake�򤿤������ʤ����ơ��ե�����θ�����³���ޤ���"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "�ɤΥե�����򤵤����Ƥ��ޤ���"
-
-#~ msgid "What are looking for?"
-#~ msgstr "�ʤˤ򤵤����Ƥ��ޤ���"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "̾�������Ϥ��Ƥ����������㡧�֥������ȥ�ס־��ѡס�"
-
-#~ msgid "Directory"
-#~ msgstr "�ǥ��쥯�ȥ�"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "CDROM�����Ĥ���ޤ����/mnt/cdrom�ˤʤˤ⤢��ޤ����"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "RPM�ѥå������Τ���ǥ��쥯�ȥ��URL"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "FTP �� HTTP�ˤĤ��Ƥϡ�hdlist�ΰ��֤���ꤷ�ʤ��ƤϤʤ�ޤ���\n"
-#~ "���URL�Ȥ����а��֤ǻ��ꤷ�ޤ�"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "�ʲ��ξ�������Ϥ��Ƥ�������"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s �Ϥ��Ǥ˻Ȥ��Ƥ��ޤ�"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "RPM�Υ١����򹹿���"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "����ȥ� %s ��ä��ޤ�"
-
-#~ msgid "Finding leaves"
-#~ msgstr "�ĥ꡼�ξܺ٤򸡺���"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "�ĥ꡼�ξܺ٤򸫤Ĥ���Τϻ��֤�������ޤ�"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "ISDN�����ɤ�ߤĤ��ޤ���:\n"
-
-#~ msgid "Other countries"
-#~ msgstr "¾�ι�"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "���ʤ�������ΤϤɤι�Ǥ�����"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel��ǥ�"
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI ��ǥ�"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "�⤷adsl��ǥबalcatel���ʤ顢alcatel������Ǥ��������������Ǥʤ����\n"
-#~ "ECI ������Ǥ�������"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "pppoe��Ȥ�ʤ�"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (����)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (�ȤƤ�����)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (����)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "�ޥ����ϤɤΥ��ꥢ��ݡ��ȤˤĤʤ��äƤ��ޤ�����"
-
-#~ msgid "Czech"
-#~ msgstr "������"
-
-#~ msgid "Slovakian"
-#~ msgstr "��������"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "ipchains RPM �� urpmi �ǥ��󥹥ȡ���Ǥ��ޤ���"
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "dhcp RPM �� urpmi �ǥ��󥹥ȡ���Ǥ��ޤ���"
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "linuxconf RPM �� urpmi �ǥ��󥹥ȡ���Ǥ��ޤ���"
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "bind RPM �� urpmi �ǥ��󥹥ȡ���Ǥ��ޤ���"
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "caching-nameserver RPM �� urpmi �ǥ��󥹥ȡ���Ǥ��ޤ���"
-
-#~ msgid ""
-#~ "The system is now connected to Internet! Congratulation.\n"
-#~ "Feel free to launch draknet at any time to setup your connection.\n"
-#~ msgstr ""
-#~ "�ޥ����̵�����󥿡��ͥåȤ���³����ޤ���������ǤȤ���\n"
-#~ "��³����ˤϡ����ĤǤ� draknet ��ư���Ƥ���������\n"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#~ msgid ""
-#~ "Welcome to %s the operating system chooser!\n"
-#~ "\n"
-#~ msgstr ""
-#~ "%s operating system chooser-he youkosou!\n"
-#~ "\n"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "LAN ������ꤹ��"
-
-#~ msgid ""
-#~ " Introduction\n"
-#~ "\n"
-#~ "The operating system and the different components available in the "
-#~ "Mandrake Linux distribution \n"
-#~ "shall be called the \"Software Products\" hereafter. The Software "
-#~ "Products include, but are not \n"
-#~ "restricted to, the set of programs, methods, rules and documentation "
-#~ "related to the operating \n"
-#~ "system and the different components of the Mandrake Linux distribution.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. License Agreement\n"
-#~ "\n"
-#~ "Please read carefully this document. This document is a license agreement "
-#~ "between you and  \n"
-#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 Paris - France, which applies "
-#~ "to the Software Products.\n"
-#~ "By installing, duplicating or using the Software Products in any manner, "
-#~ "you explicitly \n"
-#~ "accept and fully agree to conform to the terms and conditions of this "
-#~ "License. \n"
-#~ "If you disagree with any portion of the License, you are not allowed to "
-#~ "install, duplicate or use \n"
-#~ "the Software Products. \n"
-#~ "Any attempt to install, duplicate or use the Software Products in a "
-#~ "manner which does not comply \n"
-#~ "with the terms and conditions of this License is void and will terminate "
-#~ "your rights under this \n"
-#~ "License. Upon termination of the License,  you must immediately destroy "
-#~ "all copies of the \n"
-#~ "Software Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. The GPL License and Related Licenses\n"
-#~ "\n"
-#~ "The Software Products consist of components created by different persons "
-#~ "or entities.  Most \n"
-#~ "of these components are governed under the terms and conditions of the "
-#~ "GNU General Public \n"
-#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-#~ "licenses allow you to use, \n"
-#~ "duplicate, adapt or redistribute the components which they cover. Please "
-#~ "read carefully the terms \n"
-#~ "and conditions of the license agreement for each component before using "
-#~ "any component. Any question \n"
-#~ "on a component license should be addressed to the component author and "
-#~ "not to MandrakeSoft.\n"
-#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL "
-#~ "License. Documentation written \n"
-#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to "
-#~ "the documentation for \n"
-#~ "further details.\n"
-#~ "Some versions of the Software Products may contain components which are "
-#~ "not governed by the GPL \n"
-#~ "License or similar agreements. Each such component is then governed by "
-#~ "the terms and conditions \n"
-#~ "of its own specific license. Please read carefully and comply with such "
-#~ "specific licenses before \n"
-#~ "you install, use or redistribute the said components. Such licenses will "
-#~ "in general prevent the \n"
-#~ "transfer,  duplication (except for backup purposes), redistribution, "
-#~ "reverse engineering, \n"
-#~ "de-assembly, \n"
-#~ "de-compilation or modification of the component. Any breach of agreement "
-#~ "will immediately terminate \n"
-#~ "your rights under the specific license. Unless the specific license terms "
-#~ "grant you such rights, \n"
-#~ "you usually cannot install the programs on more than one system, or adapt "
-#~ "it to be used on a \n"
-#~ "network. \n"
-#~ "In doubt, please contact directly the distributor or editor of the "
-#~ "component. Transfer to third \n"
-#~ "parties or copying of such components including the documentation is "
-#~ "usually forbidden.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Intellectual Property Rights\n"
-#~ "\n"
-#~ "All rights to the components of the Software Products belong to their "
-#~ "respective authors and are \n"
-#~ "protected by intellectual property and copyright laws applicable to "
-#~ "software programs.\n"
-#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-#~ "Products, as a whole or in \n"
-#~ "parts,\n"
-#~ "by all means and for all purposes.\n"
-#~ "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-#~ "MandrakeSoft S.A.  All rights \n"
-#~ "are \n"
-#~ "reserved. The duplication is forbidden without prior written consent by "
-#~ "MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Limited Warranty\n"
-#~ "\n"
-#~ "The Software Products and attached documentation are provided \"as is\", "
-#~ "with no warranty, to the \n"
-#~ "extent permitted by law. Should the Software Products be defective, "
-#~ "MandrakeSoft S.A. will at its \n"
-#~ "own will either replace the Software Products, or reimburse the paid "
-#~ "fee.\n"
-#~ "This limited warranty is void if you fail to comply to the "
-#~ "recommendations, instructions and \n"
-#~ "conditions \n"
-#~ "of use listed in the documentation or license agreements of the Software "
-#~ "Products.\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. will in no "
-#~ "circumstances be liable for any \n"
-#~ "special, \n"
-#~ "incidental, direct or indirect damages whatsoever (including without "
-#~ "limitation damages for loss of \n"
-#~ "business, interruption of business, financial loss, legal fees and "
-#~ "penalties resulting from a court \n"
-#~ "judgement, or any other consequential loss) arising out of  the use or "
-#~ "inability to use the \n"
-#~ "Software \n"
-#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility "
-#~ "or occurance of such \n"
-#~ "damages.\n"
-#~ "\n"
-#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN "
-#~ "SOME COUNTRIES\n"
-#~ "\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors "
-#~ "will, in no circumstances, be \n"
-#~ "liable for any special, incidental, direct or indirect damages whatsoever "
-#~ "(including without \n"
-#~ "limitation \n"
-#~ "damages for loss of business, interruption of business, financial loss, "
-#~ "legal fees and penalties \n"
-#~ "resulting from a court judgement, or any other consequential loss) "
-#~ "arising out of the possession \n"
-#~ "and \n"
-#~ "use of software components or arising out of  downloading software "
-#~ "components from one of \n"
-#~ "Mandrake Linux \n"
-#~ "sites  which are prohibited or restricted in some countries by local "
-#~ "laws. This limited liability \n"
-#~ "applies to, but is not restricted to, the strong cryptography components "
-#~ "included in the Software \n"
-#~ "Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Governing Laws \n"
-#~ "\n"
-#~ "If any portion of this agreement is held void, illegal or inapplicable by "
-#~ "a court judgement, this \n"
-#~ "portion is excluded from this contract. You remain bound by the other "
-#~ "applicable sections of the \n"
-#~ "agreement.\n"
-#~ "The terms and conditions of this License are governed by the Laws of "
-#~ "France.\n"
-#~ "All disputes on the terms of this license will preferably be settled out "
-#~ "of court. As a last \n"
-#~ "resort, \n"
-#~ "the dispute will be referred to the appropriate Courts of Law of Paris - "
-#~ "France.\n"
-#~ "For any question on this document, please contact MandrakeSoft S.A.,  \n"
-#~ "43, rue d'Aboukir, 75002 Paris - France\n"
-#~ msgstr ""
-#~ " Introduction\n"
-#~ "\n"
-#~ "The operating system and the different components available in the "
-#~ "Mandrake Linux distribution \n"
-#~ "shall be called the \"Software Products\" hereafter. The Software "
-#~ "Products include, but are not \n"
-#~ "restricted to, the set of programs, methods, rules and documentation "
-#~ "related to the operating \n"
-#~ "system and the different components of the Mandrake Linux distribution.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. License Agreement\n"
-#~ "\n"
-#~ "Please read carefully this document. This document is a license agreement "
-#~ "between you and  \n"
-#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 Paris - France, which applies "
-#~ "to the Software Products.\n"
-#~ "By installing, duplicating or using the Software Products in any manner, "
-#~ "you explicitly \n"
-#~ "accept and fully agree to conform to the terms and conditions of this "
-#~ "License. \n"
-#~ "If you disagree with any portion of the License, you are not allowed to "
-#~ "install, duplicate or use \n"
-#~ "the Software Products. \n"
-#~ "Any attempt to install, duplicate or use the Software Products in a "
-#~ "manner which does not comply \n"
-#~ "with the terms and conditions of this License is void and will terminate "
-#~ "your rights under this \n"
-#~ "License. Upon termination of the License,  you must immediately destroy "
-#~ "all copies of the \n"
-#~ "Software Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. The GPL License and Related Licenses\n"
-#~ "\n"
-#~ "The Software Products consist of components created by different persons "
-#~ "or entities.  Most \n"
-#~ "of these components are governed under the terms and conditions of the "
-#~ "GNU General Public \n"
-#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-#~ "licenses allow you to use, \n"
-#~ "duplicate, adapt or redistribute the components which they cover. Please "
-#~ "read carefully the terms \n"
-#~ "and conditions of the license agreement for each component before using "
-#~ "any component. Any question \n"
-#~ "on a component license should be addressed to the component author and "
-#~ "not to MandrakeSoft.\n"
-#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL "
-#~ "License. Documentation written \n"
-#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to "
-#~ "the documentation for \n"
-#~ "further details.\n"
-#~ "Some versions of the Software Products may contain components which are "
-#~ "not governed by the GPL \n"
-#~ "License or similar agreements. Each such component is then governed by "
-#~ "the terms and conditions \n"
-#~ "of its own specific license. Please read carefully and comply with such "
-#~ "specific licenses before \n"
-#~ "you install, use or redistribute the said components. Such licenses will "
-#~ "in general prevent the \n"
-#~ "transfer,  duplication (except for backup purposes), redistribution, "
-#~ "reverse engineering, \n"
-#~ "de-assembly, \n"
-#~ "de-compilation or modification of the component. Any breach of agreement "
-#~ "will immediately terminate \n"
-#~ "your rights under the specific license. Unless the specific license terms "
-#~ "grant you such rights, \n"
-#~ "you usually cannot install the programs on more than one system, or adapt "
-#~ "it to be used on a \n"
-#~ "network. \n"
-#~ "In doubt, please contact directly the distributor or editor of the "
-#~ "component. Transfer to third \n"
-#~ "parties or copying of such components including the documentation is "
-#~ "usually forbidden.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Intellectual Property Rights\n"
-#~ "\n"
-#~ "All rights to the components of the Software Products belong to their "
-#~ "respective authors and are \n"
-#~ "protected by intellectual property and copyright laws applicable to "
-#~ "software programs.\n"
-#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-#~ "Products, as a whole or in \n"
-#~ "parts,\n"
-#~ "by all means and for all purposes.\n"
-#~ "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-#~ "MandrakeSoft S.A.  All rights \n"
-#~ "are \n"
-#~ "reserved. The duplication is forbidden without prior written consent by "
-#~ "MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Limited Warranty\n"
-#~ "\n"
-#~ "The Software Products and attached documentation are provided \"as is\", "
-#~ "with no warranty, to the \n"
-#~ "extent permitted by law. Should the Software Products be defective, "
-#~ "MandrakeSoft S.A. will at its \n"
-#~ "own will either replace the Software Products, or reimburse the paid "
-#~ "fee.\n"
-#~ "This limited warranty is void if you fail to comply to the "
-#~ "recommendations, instructions and \n"
-#~ "conditions \n"
-#~ "of use listed in the documentation or license agreements of the Software "
-#~ "Products.\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. will in no "
-#~ "circumstances be liable for any \n"
-#~ "special, \n"
-#~ "incidental, direct or indirect damages whatsoever (including without "
-#~ "limitation damages for loss of \n"
-#~ "business, interruption of business, financial loss, legal fees and "
-#~ "penalties resulting from a court \n"
-#~ "judgement, or any other consequential loss) arising out of  the use or "
-#~ "inability to use the \n"
-#~ "Software \n"
-#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility "
-#~ "or occurance of such \n"
-#~ "damages.\n"
-#~ "\n"
-#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN "
-#~ "SOME COUNTRIES\n"
-#~ "\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors "
-#~ "will, in no circumstances, be \n"
-#~ "liable for any special, incidental, direct or indirect damages whatsoever "
-#~ "(including without \n"
-#~ "limitation \n"
-#~ "damages for loss of business, interruption of business, financial loss, "
-#~ "legal fees and penalties \n"
-#~ "resulting from a court judgement, or any other consequential loss) "
-#~ "arising out of the possession \n"
-#~ "and \n"
-#~ "use of software components or arising out of  downloading software "
-#~ "components from one of \n"
-#~ "Mandrake Linux \n"
-#~ "sites  which are prohibited or restricted in some countries by local "
-#~ "laws. This limited liability \n"
-#~ "applies to, but is not restricted to, the strong cryptography components "
-#~ "included in the Software \n"
-#~ "Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Governing Laws \n"
-#~ "\n"
-#~ "If any portion of this agreement is held void, illegal or inapplicable by "
-#~ "a court judgement, this \n"
-#~ "portion is excluded from this contract. You remain bound by the other "
-#~ "applicable sections of the \n"
-#~ "agreement.\n"
-#~ "The terms and conditions of this License are governed by the Laws of "
-#~ "France.\n"
-#~ "All disputes on the terms of this license will preferably be settled out "
-#~ "of court. As a last \n"
-#~ "resort, \n"
-#~ "the dispute will be referred to the appropriate Courts of Law of Paris - "
-#~ "France.\n"
-#~ "For any question on this document, please contact MandrakeSoft S.A.,  \n"
-#~ "43, rue d'Aboukir, 75002 Paris - France\n"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "����ԥ塼���ϥ��󥿡��ͥå���³��ͭ����褦������Ǥ��ޤ���\n"
-#~ "\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "���꤬���������ޤ�����\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "���̤Υ�ǥ�ǥ��󥿡��ͥåȤ���³"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "ISDN��Ȥäƥ��󥿡��ͥåȤ���³"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "DSL(�ޤ���ADSL)��Ȥäƥ��󥿡��ͥåȤ���³"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "�����֥��Ȥäƥ��󥿡��ͥåȤ���³"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "������֡��á˳�ư���ʤ��ȡ���ưŪ�����ä��ڤ�ޤ���\n"
-#~ "�ÿ�����ꤷ�ޤ��礦 (��ư���Ǥ������ʤ���ж���Τޤޡ�"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "�ɥ��� (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "�ɤ����ޤ�����"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "���󥹥ȡ��롿�쥹���塼"
-
-#~ msgid "Rescue"
-#~ msgstr "�쥹���塼"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "�ɤΥѡ��ƥ�����󥿥��פˤ��ޤ�����"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "GNU/Linux�Υ��󥹥ȡ��뤬���Ƥ���ʣ���Υǥ����ȥ�ӥ塼������\n"
-#~ "�С������ȶ�¸���������Ȥ��ˤϡ��֥��󥹥ȡ���פ����Ӥޤ��礦��\n"
-#~ "\n"
-#~ "���Ǥ˥��󥹥ȡ��뤺�ߤ�Mandrake Linux��ߺѤ������ʤ顢�֥쥹���塼�פ�\n"
-#~ "���Ӥޤ��礦��\n"
-#~ "\n"
-#~ "\n"
-#~ "������ܰ�:\n"
-#~ "\n"
-#~ "  - ����ư(�侩): GNU/Linux�Υ��󥹥ȡ��뤬���Ƥʤ顢��������Ӥޤ���"
-#~ "����\n"
-#~ "\n"
-#~ "  - �������ޥ���: GNU/Linux �˾ܤ�����С���ʬ�Υޥ���μ�ʻȤ�����\n"
-#~ "    ���碌�����Ӥޤ��礦���ܤ����ϰʲ��򻲾Ȥ��Ƥ���������\n"
-#~ "\n"
-#~ "  - �������ѡ���: �����������GNU/Linux�˾ܤ����ͤ��������ü��\n"
-#~ "    ���󥹥ȡ���򤷤����������Ӥޤ����֥������ޥ�����\n"
-#~ "    �Υ��󥹥ȡ����Ʊ��������ʬ�Υ����ƥ�λȤ��������٤ޤ���\n"
-#~ "    �Ǥ⡢�����˼������ʤ��ʤ顢�����Фˡפ���ϻȤ�ʤ��Ǥ���������\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "GNU/Linux�ѤΥѡ��ƥ������ν������Ǥ��Ƥ���С����� GNU/Linux \n"
-#~ "�򥤥󥹥ȡ��뤷���ꡢ\n"
-#~ "�̤Υ桼�ƥ���ƥ��ǥѡ��ƥ��������ä����ˡ��ɤΥѡ��ƥ�������\n"
-#~ "Mandrake Linux�����ƥ�򥤥󥹥ȡ��뤹�뤫�����Ӥޤ��礦��\n"
-#~ "�⤷�ѡ��ƥ��������äƤ��ʤ���С��ϡ��ɥǥ������Υѡ��ƥ�������\n"
-#~ "�����Ǻ��ޤ����ѡ��ƥ������Ȥ����Τϡ�����ԥ塼���Υϡ��ɥǥ�����\n"
-#~ "����Ū�ˤ��碌������Ū�˶��ڤ뤳�ȤǤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "�������ѡ��ƥ�������Ĥ���ʤ顢�ּ�ư������ơפ����٤С���ưŪ��\n"
-#~ "Linux�ѤΥѡ��ƥ�����󤬤Ǥ�������ޤ����ѡ��ƥ�������Ĥ���ϡ���\n"
-#~ "�ǥ����������֤Ȥ��ϡ��ǽ��IDE�ɥ饤�֤���hda�ס�2���ܤ���hdb�ס��ǽ�\n"
-#~ "��SCSI�ɥ饤�֤���sda�ס��Ȥ������ˤʤ�ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "�褯����ѡ��ƥ��������ڤ����Ȥ��Ƥϡ�root�ѡ��ƥ������(/) ��\n"
-#~ "boot�ѡ��ƥ������(/boot) ����ޤ���root�ϥե����륷���ƥ��\n"
-#~ "�ǥ��쥯�ȥ�ΤƤäڤ�ǡ�/boot�ˤϥ���ԥ塼���Υ����å������줿\n"
-#~ "�Ȥ��˵�ư��ɬ�פʥե����뤬�֤��Ƥ���Ȥ����Ǥ���\n"
-#~ "\n"
-#~ "\n"
-#~ "�ѡ��ƥ��������ڤ�ȡ��դĤ��Ϥ����Υǡ����������ä��ơ���Ȥ�\n"
-#~ "���ޤ��󡣤�����ѡ��ƥ��������ڤ�Τϡ��鿴�ԤˤϤ��ä��ʤ�\n"
-#~ "�Ǥ������ȤäƤⵤ��줹���ΤǤ��������ʤ�ʤ��褦�ˡ�DiskDrake\n"
-#~ "�Ϥ��Υץ�������ʤ�٤���ñ�ˤ��ޤ����ޤ��ϥɥ�����ơ�������\n"
-#~ "�ɤ�ǡ���˿ʤ����ˤ��ä��굤������失�ޤ��礦��\n"
-#~ "\n"
-#~ "\n"
-#~ "�ɤΥ��ץ����⡢�����ܡ��ɤ����٤ޤ����ѡ��ƥ����������֤ˤϡ�\n"
-#~ "���֤Ⱦ岼�Υ������륭����Ȥ��ޤ��礦���ѡ��ƥ�������������顢\n"
-#~ "���Υ������Ȥ��ޤ���\n"
-#~ "\n"
-#~ "- Ctrl-c  �������ѡ��ƥ���������ʶ��Υѡ��ƥ����������������\n"
-#~ "\n"
-#~ "- Ctrl-d  ���Υѡ��ƥ���������\n"
-#~ "\n"
-#~ "- Ctrl-m  �ޥ���ȥݥ���Ȥ�����\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "��������ä��ѡ��ƥ������Ϥ��٤ơ��ե����ޥåȤ��ʤ��ȻȤ��ޤ���\n"
-#~ "�ʥե����ޥåȤȤ����Τϥե����륷���ƥ��Ĥ��뤳�ȤǤ��ˡ������\n"
-#~ "��¸�Υѡ��ƥ�������ե����ޥåȤ��ơ������Υǡ�����õ��Ǥ��ޤ���\n"
-#~ "���ա���¸�Υѡ��ƥ������ϡ��ե����ޥåȤ��ʤ���ɬ�פϤ���ޤ���\n"
-#~ "�ä���¸�������ǡ�����/home �� /usr/local�ʤɡˤ�����С��ե����ޥå�\n"
-#~ "���ƤϤ����ޤ���"
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "������ѥå������򥤥󥹥ȡ��뤷�Ƥ��ޤ�������ˤϿ�ʬ������ޤ��衣\n"
-#~ "��¸�����ƥ�Υ��åץ��졼�ɤ���������ϡ�������Ĵ�٤뤳�Ȥ�¿����\n"
-#~ "�ǡ���äȤ�����ޤ���"
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "�⤷ DrakX ���ޥ����򸫤Ĥ����ʤ��ä��ꡢ�������Ф줿�������å�\n"
-#~ "�������ä��ꤹ��Ȥ��ϡ���˥ޥ����ΰ������ФƤ���Ϥ��Ǥ���\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX �Τ�ä�����Ǥ褱��С���OK�פ򥯥�å����ޤ��礦��\n"
-#~ "���꤬�����äƤ����顢��ʬ�Υޥ����ˤ����Ф�\n"
-#~ "�ᤤ����Υޥ������˥塼��������Ǥ���������\n"
-#~ "\n"
-#~ "\n"
-#~ "���ꥢ��ޥ�����ȤäƤ���Ȥ��ˤϡ����줬�Ĥʤ��äƤ��륷�ꥢ��ݡ���\n"
-#~ "����ꤷ�Ƥ���������"
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "�����Ǥϡ��������륨�ꥢ�ͥåȥ����LAN�ˤ���ǥ������򤷤ޤ���\n"
-#~ "\n"
-#~ "�֥������� LAN�פ����֤ȡ�DrakX �ϥޥ���Υ������ͥåȥ����ץ���õ��\n"
-#~ "�ޤ���PCI�Υ����ץ��ϼ�ưŪ�˸��Ĥ��ä����ꤵ���Ϥ��Ǥ���\n"
-#~ "�⤷���Ȥ��Υ����ץ���ISA �ʤ顢��ư�Ǥϸ��ФǤ��ޤ��󡣤��ξ�硢\n"
-#~ "���Ȥ������ɽ���ФƤ���Τǡ�������������Ǥ���������\n"
-#~ "\n"
-#~ "\n"
-#~ "SCSI�����ץ��ξ�硢�Ȥꤢ�����ɥ饤�Ф˥����ץ���õ�����Ƥߤޤ��礦��\n"
-#~ "����ʤ顢��ʬ�ǥɥ饤�ФΥ��ץ�������ꤷ�ޤ������ꥪ�ץ����ϡ�\n"
-#~ "��ʬ�Υϡ��ɥ���������°ʸ���Ĵ�٤Ƥ���������\n"
-#~ "\n"
-#~ "\n"
-#~ "���Υޥ��󤬤��Ǥ˴�¸�Υͥåȥ���ˤĤʤ��äƤ���ʤ顢�ͥåȥ��\n"
-#~ "�����Ԥ�ɬ�פʾ���򶵤�äƤ���Ϥ��Ǥ�(IP ���ɥ쥹���ͥåȥ����\n"
-#~ "���֥ޥ������̾Υͥåȥޥ����ˡ��ۥ���̾)������ʤɤǼ�ʬ�����Υͥå�\n"
-#~ "����������Ȥ��Ƥ���ʤ顢���ɥ쥹�ʤɤϼ�ʬ�����Ӥޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "�֥�ǥ�ˤ��������륢�åספ����֤ȡ���ǥ�ˤ�륤�󥿡��ͥå���³\n"
-#~ "�����ꤵ��ޤ���DrakX �ϥ�ǥ��õ���ޤ��������줬���Ԥ����顢��ǥ��\n"
-#~ "�Ĥʤ��äƤ��륷�ꥢ��ݡ��Ȥ�ʬ�ǻ��ꤷ�Ƥ���������"
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "GNU/Linux �ǤϤ�����ʥץ�󥿤��Ȥ��ޤ����������줾�����꤬�������ޤ���\n"
-#~ "���������������ס���ϥǥե���ȤΥץ��̾�Ȥ��ơ�lp�פ�Ȥ��ޤ���\n"
-#~ "�����顢lp�Ȥ���̾���Υץ�󥿤���Ĥ�ɬ�פǤ����Ǥ⡢��ĤΥץ��\n"
-#~ "��ʣ����̾����Ĥ��뤳�Ȥ�Ǥ��ޤ������ΤȤ��ϡ�|�פǶ��ڤ�ޤ���\n"
-#~ "�����顢�ץ�󥿤ˤ狼��䤹��̾����Ĥ�������С��������˽񤤤�\n"
-#~ "�����Ф��ߤޤ������Ȥ��С�My Printer|lp�פȤ������ˡ�\n"
-#~ "̾������ˡ�lp�פ��ޤޤ��ץ�󥿤��ǥե���Ȥˤʤ�ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "�ץ�󥿤�ľ�ܥ���ԥ塼���ˤĤʤ��äƤ���С��֥�������ץ�󥿡פ�\n"
-#~ "���Ӥޤ������ξ�硢�ץ�󥿤ΤĤʤ��äƤ���ݡ��Ȥ���ꤷ�ơ�Ŭ�ڤ�\n"
-#~ "�ե��륿�����Ӥޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "�ͥåȥ����Τۤ���Unix�ޥ���ˤĤʤ��ä��ץ�󥿤�Ȥ��ʤ顢\n"
-#~ "�֥�⡼�� lpd�פ����Ӥޤ��礦�������Ȥ��ˤϡ��桼��̾��ѥ���ɤ�\n"
-#~ "����ޤ��󤬡����Υ����о�ΰ������塼��̾�����פ�ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "SMB�ץ�󥿤�Ȥ��ʤ�ʤĤޤ�ͥåȥ����Υ�����ɥ���9x/NT�ޥ���\n"
-#~ "�ˤĤʤ��ä��ץ�󥿤�Ȥ��Ȥ�����̣�Ǥ��ˡ����Υޥ����SMB ̾�ʤ���\n"
-#~ "��TCP/IP̾�Ȥ���ʪ�Ǥ��ˤȡ����ˤ�äƤ�IP���ɥ쥹��ɬ�פˤʤ�ޤ���\n"
-#~ "����˥桼��̾��������롼��̾�ȥѥ���ɡ�����ˤϥץ��̾��\n"
-#~ "�ʤ��ȥץ�󥿤˥��������Ǥ��ޤ���NetWare �ץ�󥿤⡢������롼�פ�\n"
-#~ "���פʤ����ǡ��ۤȤ��Ʊ���Ǥ���"
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "�����Ǥϡ֤Ϥ��פ�������Τ򶯤��侩���ޤ����夫��MS������ɥ�����\n"
-#~ "���󥹥ȡ��뤷���顢�֡��ȥ������Ͼ�񤭤���ޤ��������ʤä��顢\n"
-#~ "�֡��ȥǥ��������äƤ����ʤ��ȡ�Linux��Ω���夲���ʤ��ʤ�ޤ��衣"
-
-#~ msgid "Move your wheel!"
-#~ msgstr "�ۥ������ޤ路�Ƥߤޤ��礦��"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "�ѹ��������˴����ޤ�����"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "�ޥ����η��Ϥʤ�Ǥ�����"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "�����٤μ�ư����"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "ͭ���ʲ����٤����뤿����̤���ˡ���Ƥߤޤ���\n"
-#~ "�����꡼�����Ǥ��ޤ�...\n"
-#~ "����ʤ��˥��Υ����å����ڤäƤ�������礦�֡�����ä��� beep ��\n"
-#~ "���Τ餻�ޤ���"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "ͭ���ʲ�����(��: 800x600)��ưŪ��õ���ޤ���\n"
-#~ "��������ǥޥ��󤬻ߤޤäƤ��ޤ����⤷��ޤ���\n"
-#~ "õ���Ƥߤޤ��礦����"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "ͭ���ʥ⡼�ɤ����դ���ޤ���\n"
-#~ "¾�Υӥǥ�������/��˥��ǻ�Ʋ�������"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "�����٤μ�ư����"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB �ޥ���"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB �ޥ�����2�ܥ����"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB �ޥ�����3�ܥ���ʾ��"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB�ޥ���"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB�ޥ�����2�ܥ����"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB�ޥ�����3�ܥ���ʾ��"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI �Х��ޥ���"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "�ޥ��������եȡ��Х��ޥ���"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "�����ƥå����Х��ޥ���"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB�ޥ�����3�ܥ���ʾ��"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A �ʾ�(serial)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (���ꥢ��)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (���ꥢ��)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (���ꥢ��)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "���ѥޥ��� (���ꥢ��)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "�ޥ��������եȸߴ��ʥ��ꥢ���"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "���Ѥ�3�ܥ���ޥ��� (���ꥢ��)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (���ꥢ��)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "���󥿡��ͥå���³�ˤϡ��ͥåȥ�������ץ������ꤹ��ɬ�פ�����ޤ���"
-
-#~ msgid ""
-#~ "Please choose which network adapter do you want to use to connect to "
-#~ "internet.\n"
-#~ "If you don't know, choose eth0.\n"
-#~ msgstr ""
-#~ "���󥿡��ͥåȤˤĤʤ�����Υͥåȥ�������ץ�������Ǥ���������\n"
-#~ "�狼��ʤ���С�eth0 ������Ǥ����ޤ��礦��\n"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "nfs �ޥ���Ȥ˼���"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX �ϡ�XFree 3.3��XFree 4.0ξ��������ե������Ĥ���ޤ����Ǥ�\n"
-#~ "�ǥե���ȤǤ��б��ӥǥ������ɤ�̵���¤ꡢ4.0�����ФΤۤ���Ȥ��ޤ���\n"
-#~ "\n"
-#~ "XFree 3.3 �Τޤޤˤ��Ƥ����ޤ���?"
-
-#~ msgid "Cryptographic"
-#~ msgstr "�Ź沽"
-
-#~ msgid "Configure LAN"
-#~ msgstr "LAN ������"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "�ͥåȥ������򤷤ʤ�"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "�����ƥ�Υ������� LAN �ͥåȥ�������ꤷ�ޤ�����"
-
-#~ msgid "Show less"
-#~ msgstr "��ά��ɽ��"
-
-#~ msgid "Show more"
-#~ msgstr "�ܺ٤�ɽ��"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "�ϡ��ɥɥ饤�֤�����Ѥ�"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "��������ץ�󥿤�URI"
-
-#~ msgid "URI for Network printer"
-#~ msgstr "�ͥåȥ���ץ�󥿤�URI"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "��������ץ�󥿥ǥХ��� (URI)"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "�ץ�󥿤��Ĥʤ��äƤ���ǥХ����ϲ��Ǥ���\n"
-#~ "(���� �ѥ����/dev/lp0 �� LPT1: �ˤʤ�ޤ�)��\n"
-
-#~ msgid "Network Printer Options (URI)"
-#~ msgstr "Netware �ץ�󥿤Υ��ץ���� (URI)"
-
-#~ msgid "tie"
-#~ msgstr "�ͥ�����"
-
-#~ msgid "brunette"
-#~ msgstr "�֥�ͥå�"
-
-#~ msgid "girl"
-#~ msgstr "���λ�"
-
-#~ msgid "woman-blond"
-#~ msgstr "�֥���ɽ���"
-
-#~ msgid "automagic"
-#~ msgstr "�����ȥޥ��å�"
-
-#~ msgid "Have you been provided with a hostname?"
-#~ msgstr "�ۥ��ȥ͡�����󶡤���Ƥ��ޤ�����"
-
-#~ msgid "Local Area Network specification"
-#~ msgstr "�������륨�ꥢ�ͥåȥ���ξܺ�"
-
-#~ msgid "You may now decide which class C network to use.\n"
-#~ msgstr "�ɤΥ��饹C�ͥåȥ����Ȥ������Ƥ���������\n"
-
-#~ msgid "Internet Connection Sharing - setup of %s"
-#~ msgstr "���󥿡��ͥåȶ�ͭ��³ - %s ������"
-
-#~ msgid ""
-#~ "The following interface is about to be configured:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "���Υ��󥿡��ե����������ꤷ�褦�Ȥ��Ƥޤ���\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-
-#~ msgid "Everything configured!"
-#~ msgstr "���Ƥ����ꤷ�ޤ�����"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "�����ܡ��ɥ쥤�����Ȥϲ��Ǥ�����"
-
-#~ msgid "pptp alcatel"
-#~ msgstr "pptp alcatel"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "PCMCIA�����ɤ򤵤����Ƥߤޤ��礦����"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "%s�ǥХ����򤵤����Ƥߤޤ�����"
-
-#~ msgid "Small(%dMB)"
-#~ msgstr "�Ǿ�(%dMB)"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "�����ƥ�Υ�ǥ�ˤ��������륢�åץͥåȥ�������ꤷ�ޤ�����"
-
-#~ msgid "Do you want to configure a ISDN connection for your system?"
-#~ msgstr "�����ƥ��ISDN��³�����ꤷ�ޤ�����"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "PCI�ǥХ����򤵤����Ƥߤޤ�����"
-
-#~ msgid "Searching root partition."
-#~ msgstr "�롼�ȥѡ��ƥ������򸡺�"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: ����ϥ롼�ȥѡ��ƥ������ǤϤ���ޤ��󡤤ۤ�������Dz�������"
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "�ɤΥѡ��ƥ�������롼�ȥѡ��ƥ������ˤ��ޤ���"
-
-#~ msgid "Autologin at startup"
-#~ msgstr "��ư���μ�ư��������"
-
-#~ msgid "Autologin - Choose default user"
-#~ msgstr "��ư�������� - �ǥե���ȥ桼��������"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "������ɥ����Υѡ��ƥ�����󤬤���ޤ���"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Linux4Win����������ζ���������ޤ���"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# When possible cp437 accentuated letters can be used too.
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "LILO operating system chooser-he youkosou!\n"
-#~ "\n"
-#~ "<TAB>: Ichiran Hyouji\n"
-#~ "\n"
-#~ "Ichiran kara erande <ENTER> wo oshimasu. %d byou de Default ni narimasu.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "SILO �ᥤ�󥪥ץ����"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "SILO �ˤϰʲ��Υ���ȥ꤬����ޤ���\n"
-#~ "�ۤ��Υ���ȥ��ä��뤫�ѹ����뤳�Ȥ��Ǥ��ޤ���"
-
-#~ msgid "This label is already in use"
-#~ msgstr "���Υ�٥�Ϥ��Ǥ˻Ȥ��Ƥ��ޤ�"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "SILO �Υ��󥹥ȡ���˼��Ԥ��ޤ������ʲ��Υ��顼��ȯ��:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX �Ϥޤ���PCI�Х���SCSI�����ץ���õ���ˤ����ޤ��������ץ����ߤ�\n"
-#~ "���äơ��Ȥ��ɥ饤�Ф��狼��С������ưŪ���Ȥ߹��ߤޤ��������ץ�\n"
-#~ "���������󤢤äƤ�����פǤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "�⤷ISA�Х���SCSI�����ץ���ȤäƤ����ꡢPCI�Х���SCSI�����ץ��Ǥ�\n"
-#~ "DrakX�˥ɥ饤�Ф��狼��ʤ��ä��ꤹ��Ȥ����ޤ���SCSI�����ץ����ʤ�\n"
-#~ "�Ȥ��ˤϡ��ץ���ץȤ��ФƤ��ơ�SCSI�����ץ������뤫�ɤ��������ޤ���\n"
-#~ "�ʤ���С֤������פ������Ƥ�������������С֤Ϥ��פ������ޤ��礦��\n"
-#~ "����ȥɥ饤�Фΰ���ɽ���ФƤ���Τǡ�Ŭ�ڤʤ�Τ�����Ǥ���������\n"
-#~ "\n"
-#~ "\n"
-#~ "�ɥ饤�Ф�������顢���Υɥ饤�Фǥ��ץ�������ꤷ�������ɤ�����\n"
-#~ "DrakX�������Ƥ��ޤ����ǽ�ϡ��ɥ饤�Ф˥ϡ��ɥ�������ץ����֤�����\n"
-#~ "�ߤޤ��礦�����������Ϥ���Ǥ��ޤ������ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "���줬����ʤ顢���Υ����ץ��ˤĤ��ƥɥ�����ơ������˽񤤤Ƥ��ä�\n"
-#~ "���Ȥ䡢������ɥ����Υץ��ѥƥ��ξ���ʤɤ�פ������Ƥߤޤ��礦������\n"
-#~ "���ȡ��륬���ɤǤ⡢����򹵤��Ƥ����褦�ˤ����ᤷ�ޤ�����͡����ξ���\n"
-#~ "��ɥ饤�Фˤ錄���Ƥ�뤳�Ȥˤʤ�ޤ���"
-
-#~ msgid "Shutting down"
-#~ msgstr "����åȥ�������"
-
-#~ msgid "useless"
-#~ msgstr "̵��"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "����ԥ塼����˥�����ɥ�������� True Type �ե���Ȥ��դ��ޤ�����\n"
-#~ "������Ȥ��ޤ���? ���ʤ��� Linux ��Ǥ�����Ȥ����������뤫��Τ����"
-#~ "��������"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Linux�Υ��󥹥ȡ��뤬���Ƥ����ۤ���Linux�ǥ����ȥ�ӥ塼������\n"
-#~ "�С������ȶ�¸���������Ȥ��ˤϡ��֥��󥹥ȡ���פ����Ӥޤ��礦��\n"
-#~ "\n"
-#~ "\n"
-#~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus),\n"
-#~ "6.1 (Helios), Gold 2000, 7.0 (Air)�ʤɡ��Ť�Mandrake Linux��\n"
-#~ "���åץ��졼�ɤ���ʤ�֥��åץ��졼�ɡפ����Ӥޤ��礦��"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "LILO ��Ȥ��ޤ�����"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "�Ǥϥ��󥹥ȡ��뤹��ѥå�����������˰ܤ�ޤ��礦��\n"
-#~ "\n"
-#~ "\n"
-#~ "�ޤ��ϡ����󥹥ȡ���䥢�åץ��졼�ɤ������ѥå������򤪤����äѤ�\n"
-#~ "���롼�פ����Ӥޤ������θ�ǡ��ѥå������Υ������ʤɤ����äȺ٤���\n"
-#~ "���򤬤Ǥ��ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "�������ѡ��ȡ��⡼�ɤʤ顢���̤Υѥå����������٤ޤ���\n"
-#~ "�ѥå���������ˤϡ�¾�Υѥå��������ʤ��ȻȤ��ʤ���Τ�����ޤ���\n"
-#~ "�����ѥå������ΰ�¸�ط��Ȥ����ޤ��������Ǥϥѥå����������֤ȡ�\n"
-#~ "�����ɬ�פʥѥå������⼫ưŪ�����Ф�ƥ��󥹥ȡ��뤵��ޤ���\n"
-#~ "��¸�ط��������˲�褵��ʤ��ȡ��ѥå������ϥ��󥹥ȡ���Ǥ��ޤ���"
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) �ϡ�Linux�䤽��¾��OS��֡��ȤǤ��ޤ���\n"
-#~ "�ǥ�������γƼ��OS�ϡ����̤ϥ��󥹥ȡ������Ǥ�����ȸ��Ф���Ƥ���"
-#~ "����\n"
-#~ "�Ǥ⸡�Ф���Ƥ��ʤ��褦�ʤ顢�������ɲäǤ��ޤ���\n"
-#~ "\n"
-#~ "\n"
-#~ "�ߤ�ʤ˥����������Ƥۤ����ʤ�OS�����ä��顢��������Ϻ�����Ƥ����ޤ���\n"
-#~ "�ʤ���OS��Ω���夲��ˤϥ֡��ȥǥ�������ɬ�פˤʤ�ޤ���"
-
-#~ msgid ""
-#~ "Now that you've selected desired groups, please choose \n"
-#~ "how many packages you want, ranging from minimal to full \n"
-#~ "installation of each selected groups."
-#~ msgstr ""
-#~ "�����ߤ������롼�פ�����򤷤Ƥ�Ȥ����Ǥ���\n"
-#~ "���򤷤����줾��Υ��롼�פǺǾ������祤�󥹥ȥ졼�������ϰϤ�\n"
-#~ "�ɤΤ��餤�Υѥå�������ɬ�פ�����Dz�������"
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "���󥹥ȡ��뤷����¾�� CD ������"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "��������ˤ��ܰ¤�����Ǥ�������:\n"
-#~ "\n"
-#~ "  - �侩: Linux�Υ��󥹥ȡ��뤬���Ƥʤ餳�졣\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ������������: Linux�˾ܤ�����С������ƥ�λȤ����˱����ơ֥Ρ���"
-#~ "���\n"
-#~ "�ֳ�ȯ�ѡס֥����Сפ��椫�����Ӥޤ��礦���դĤ��Υ����ƥ�ˤ�������С�\n"
-#~ "�֥Ρ��ޥ�פ������Ǥ��礦����˥��եȳ�ȯ�򤹤�Ĥ��ʤ顢�ֳ�ȯ�ѡפ�\n"
-#~ "���Ӥޤ������뤤�ϡ����ѥ����Сʥ᡼���ѡ������ѤʤɤʤɡˤȤ��ƻȤ��ʤ�\n"
-#~ "�֥����Сפ���������Ǥ���\n"
-#~ "\n"
-#~ "\n"
-#~ "  - �������ѡ��ȡ�Expert: GNU/Linux �Х�Х�ǡ��٤����������ޥ����򤷤�\n"
-#~ "����С����Υ��󥹥ȡ��������Ǥ������������ΤȤ��������ƥ�λ��Ӥ�\n"
-#~ "�֥������ޥ����פˤʤ�ޤ���"
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "�Ź��Ϣ�Υѥå�������������������"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "SCSI ������"
-
-#~ msgid "Installation CD Nr %s"
-#~ msgstr "���󥹥ȥ졼����� CD Nr %s"
-
-#~ msgid "Which language do you want?"
-#~ msgstr "�ɤθ����Ȥ��ޤ�����"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "�ɤλ���ˡ�����Ӥޤ�����"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Ƴ��/��ĥ������"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "����ȥ� %s �Ϥ��Ǥ�¸�ߤ��ޤ�"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "HTP �λȤ���֡��ȥǥ������ѤΥե��åԡ���ɥ饤�֤��������Ƥ�������\n"
-#~ "�ե��åԡ�������ƤΥǡ����ϼ����ޤ�"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "�ե��åԡ��ǵ�ư���ƥ��󥹥ȡ������ʤ����Ƥ�������"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "�ѥ�᡼�����Ѥ��ƥ��󥹥ȡ������ʤ����Ƥ���������"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "HTP �֡��ȥե��åԡ����Ĥ���ޤ���Ǥ�����\n"
-#~ "���󥹥ȡ������ʤ����ơ��ץ���ץȤǡ�%s�ɤ����Ϥ��ƤߤƤ���������"
-
-#~ msgid "User name:"
-#~ msgstr "�桼��̾:"
-
-#~ msgid "Password:"
-#~ msgstr "�ѥ����:"
-
-#~ msgid "developer"
-#~ msgstr "��ȯ��"
-
-#~ msgid "beginner"
-#~ msgstr "�鿴��"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "��˥� (SCSI �ɥ饤�֤ΰ�����ɬ��)"
-
-#~ msgid "linear"
-#~ msgstr "��˥�"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "%s �ѡ��ƥ�����󤫤� %s,"
-
-#~ msgid "changing type of"
-#~ msgstr "�����פ��ѹ�"
-
-#~ msgid "resizing"
-#~ msgstr "�ꥵ������"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "������: %s MB"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "�����ʥ��å��������ȥե����� %s (%s ����)"
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "������ѥå�������¿�����ޤ���%dMB ����Τ� %dMB �ˤ����ޤ�ޤ���"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "%d MB �򥤥󥹥ȡ��뤷�ޤ����ۤ��Υץ������򥤥󥹥ȡ������ޤ�"
-
-#~ msgid "Installation CD Nr 1"
-#~ msgstr "���󥹥ȥ졼����� CD Nr 1"
-
-#~ msgid "Local LAN"
-#~ msgstr "�������� LAN"
diff --git a/perl-install/share/po/ko.po b/perl-install/share/po/ko.po
deleted file mode 100644
index 3c0726443..000000000
--- a/perl-install/share/po/ko.po
+++ /dev/null
@@ -1,11766 +0,0 @@
-# Korean translation of DrakeX.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# sangkim@dreamwiz.com, 1999.
-# Ricky Jang <ricky@iolinux.co.kr>, 2000
-# Jaegeum Choe <baedaron@hananet.net>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 1.1.5\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-09-24 01:16--500\n"
-"Last-Translator: Jaegeum Choe <baedaron@hananet.net>\n"
-"Language-Team: Korean <baedaron@hananet.net>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=euc-kr\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "��� ��带 ���������� ����"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Xinerama Ȯ�� ���"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "��%s��ī�常 ���� (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "���� ��� ����"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"���� �ý����� ���� ��� ������ �����մϴ�.\n"
-"��� �Ͻðڽ��ϱ�?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "�׷��� ī��"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "�׷��� ī�� ����"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "X ���� ����"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X ����"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "X ���� ����"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X ����"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "��� XFree ������ �����Ͻðڽ��ϱ�?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"���� ī��� XFree %s�θ� ������ 3D �ϵ���� ���ӱ���� �����˴ϴ�.\n"
-"���� ī��� ��¼�� ���� ���� 2D ������ ���� �� �ִ� XFree %s�� �����մϴ�."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "���� ī��� XFree %s�� 3D �ϵ���� ���ӱ���� �����մϴ�."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s�� ����� 3D �ϵ���� ����"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"���� ī��� XFree %s�θ� ������ 3D �ϵ���� ���ӱ���� �����˴ϴ�.\n"
-"����: �̰��� �������� �����̸� ���� ��ǻ�͸� ���߰� �� �� �ֽ��ϴ�."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s�� ����� ������ 3D �ϵ���� ����"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"���� ī��� XFree %s�θ� ������ 3D �ϵ���� ���ӱ���� �����˴ϴ�.\n"
-"����: �̰��� �������� �����̸� ���� ��ǻ�͸� ���߰� �� �� �ֽ��ϴ�.\n"
-"���� ī��� ��¼�� ���� ���� 2D ������ ���� �� �ִ� XFree %s�� �����մϴ�."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (��ġ ǥ�� ����̹�)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree ����"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "�׷��� ī���� �޸� �뷮�� �����ϼ���"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "���� �ɼ��� �����ϼ���"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "����͸� �����ϼ���"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "�����"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"���� �׸��� ���� �߿��� ���� ���ļ���� �� ���� �߿��� ���ڰ� �ֽ��ϴ�. ���� "
-"���ļ��� \n"
-"��üȭ���� ���ŵǴ� �ֱ��̸�, ���� ���ļ��� ��ĵ���ε��� ���ŵǴ� �ֱ��Դ�"
-"��.\n"
-"\n"
-"�ſ� �߿�: ���� ���� ������� �ɷ�ġ�� �Ѿ�� ���� �������� ������: \n"
-"���� ����Ͱ� �Ѽյ� �� �ֽ��ϴ�.\n"
-"�� �𸣰ڴٸ�, �����ϰ� ���� �������� �����ϼ���"
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "���� ���ļ�"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "���� ���ļ�"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "����Ͱ� �������� �ʾҽ��ϴ�."
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "�׷��� ī�尡 ���� �������� �ʾҽ��ϴ�."
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "�ػ󵵰� ���õ��� �ʾҽ��ϴ�."
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "�� ������ �׽�Ʈ�� ���ðڽ��ϱ�?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "���� : �� �׷��� ī�带 �׽�Ʈ�ϸ� ��ǻ�Ͱ� �������� �𸨴ϴ�."
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "���� �׽�Ʈ"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"�Ϻ� ���ڰ����� ������ ������."
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "������ �߻��߽��ϴ�:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d �� ���ҽ��ϴ�."
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "�� ������ �½��ϱ�?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "������ �߻��߽��ϴ�. �Ϻ� ���ڰ��� ������ ������."
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "�ػ�"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "�ػ󵵿� ������ �����ϼ���"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "�׷��� ī��: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 ����: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "�߰� �ɼ�"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ȯ��"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "������ ���"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "��� ǥ��"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "�ػ�"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "���� ����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "���콺 ����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "���콺 ��ġ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "�����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "����� �������ļ�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "����� �������ļ�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "�׷��� ī��: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "�׷��� ī�� ID: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "���� �޸�: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "���� �ɵ�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "�ػ�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 ����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ����̹�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X-Window ���� �غ���"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "��� �Ͻðڽ��ϱ�?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "����� ����"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "�׷��� ī�� ����"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "���� �ɼ� ����"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "�ػ� ����"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "���� ����"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "�ٽ� �׽�Ʈ"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "����"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"��������� �����ұ��?\n"
-"���� ����:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "���۽� �ٷ� X ����"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"���ýÿ� �ڵ����� X�����찡 ���۵ǵ��� �Ҽ� �ֽ��ϴ�.\n"
-"�ٽ� ���������� �ڵ����� X������ ���۵DZ� ���ϼ���?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "��������� �����Ϸ��� %s�� ��α��� �ϼ���."
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "�α׾ƿ��ϰ� Crtl-Alt-BackSpaceŰ�� ��������."
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ���� (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "3��2õ ���� (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "6��5õ ���� (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "õ6�鸸 ����  (24bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "40�� ���� (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "16 MB �̻�"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "ǥ�� VGA, 640x480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "���� VGA, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 ȣȯ, 1024x768 @ 87 Hz interlaced (800x600 �ȵ�)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "���� VGA, 1024x768 @ 87 Hz interlaced, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Ȯ�� ���� VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "�����ͷ��̽� SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "�����ļ� SVGA,  1024x768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "1280x1024 @ 60 Hz ���� �������ļ� �����"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "1280x1024 @ 74 Hz ���� �������ļ� �����"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "1280x1024 @ 76 Hz ���� �������ļ� �����"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "1600x1200 @ 70 Hz ��� ���� �����"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "1600x1200 @ 76 Hz ��� ���� �����"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "��Ʈ ��Ƽ���� ù��° ����"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "����̺��� ù��° ����(MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO ��ġ"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "��Ʈ�δ��� ��� ��ġ�ϰ� ��������?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/GRUB ��ġ"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "�ؽ�Ʈ �޴� LILO"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "�׷��� �޴� LILO"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "����/��������� ����(loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "��Ʈ�δ� �� �ɼǵ�"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "����� ��Ʈ�δ�"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "��Ʈ�δ� ��ġ"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "��Ʈ ��ġ"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (������ BIOS�鿡�� �۵����� �������� �ֽ��ϴ�.)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "���ѵ� ���"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "����Ʈ ���"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "���� ���"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "�⺻ �̹����� ���õ� ������ �����ð�"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "��ȣ"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "��ȣ (Ȯ��)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "������ �ɼ��� �����մϴ�."
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "����"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "���ý� /tmp ���丮 �ڵ� û��"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "�ɼ�: ��Ȯ�� �޸� �뷮 (%d MB �߰�)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "���� profiles ���"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "�޸� �뷮�� MB�� �Է��ϼ���"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "�ɼ�: �������� �ɼ����ѡ��� ��ȣ���� ���ɼ� �����ϴ�."
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "�ٽ� �õ��ϼ���."
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "��ȣ�� ��ġ���� �ʽ��ϴ�."
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "�ʱ�ȭ �޽���"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "�߿��� ���� ����"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Ŀ�� ��Ʈ ���ѽð�"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "CD ���� ���?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "OF ���� ���?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "�⺻ OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"�� ���� �׸��� ���⿡ ǥ�õǰ� �ֽ��ϴ�.\n"
-"�� �߰��ϰų�, ������ �͵��� �����Ҽ� �ֽ��ϴ�."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "�߰�"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "�Ϸ�"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "����"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "� ������ �׸��� �߰��Ͻðڽ��ϱ�?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "������"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "��Ÿ OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "��Ÿ OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "��Ÿ OS (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "�̹���"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "��Ʈ"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "�߰�"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "�ʱ�ȭ ����ũ"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "�б�-����"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "���̺�"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "����"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "�׸��"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "�⺻��"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "����ũ �뷮"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "���� ����"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "�׸� ����"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "�� �׸���� ������ �ʽ��ϴ�."
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "���� ��Ƽ���� �ݵ�� �ʿ��մϴ�."
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "�� �׸���� �̹� ���ǰ� �ֽ��ϴ�."
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s �������̽��� �����Ǿ����ϴ�."
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "�� �ٸ����� ��ġ�Ǿ� �ֽ��ϱ�?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "�� �ٸ� %s �������̽��� ��ġ�Ǿ� �ֽ��ϱ�?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "�ƴϿ�"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "��"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "�ϵ���� ���� ����"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%sī�� ����̹� %s ��ġ��"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(%s ��� ���)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "� %s ����̹��� �õ��� ���ϱ�?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"�Ϲ������� %s ����̹��� �߰� ���� ���̵� �� �۵�������, � ��쿡�� \n"
-"�߰� ������ �ʿ�� �ϱ⵵ �մϴ�. �߰� �ɼ��� �����Ͻðڽ��ϱ�, �ƴϸ� \n"
-"�ʿ��� ������ �ڵ��˻��ϰ� �ϰڽ��ϱ�?\n"
-"�ڵ��˻��� ��¼�ٰ� ��ǻ�͸� ���߰� �� ���� �ֽ��ϴ�.������,\n"
-"��ġ�� �Ѽ������� �ʽ��ϴ�."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "�ڵ��˻�"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "�ɼ� ����"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"���� %s ����̹��� �ɼ��� ������ �� �ֽ��ϴ�.\n"
-"�ɼ��� ``�̸�=�� �̸�2=��2 ...''�������� �����մϴ�..\n"
-"����, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "��� �ɼǵ�:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"%s ����� �о���̴µ� �����߽��ϴ�.\n"
-"�ٸ� ������ �ٽ� �õ��� ���ðڽ��ϱ�?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(�̹� %s��(��) �߰��Ǿ����ϴ�.)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "�� ��ȣ�� �ʹ� �ܼ��մϴ�."
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "����ڸ��� �Է��� �ּ���"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "����ڸ��� ���� �ҹ��ڳ� ����, '-' �׸��� '_' �� ���Եɼ� �ֽ��ϴ�."
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "�� ����ڸ��� �̹� �߰��Ǿ� �ֽ��ϴ�."
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "����� �߰�"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"����� �Է�\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "����� �㰡"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "���� �̸�"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "����ڸ�"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "���� �ؼ���"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "������"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "�ڵ��α���"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"�ڵ����� Ư�� ����ڷμ� �α��εǵ��� �� �� �ֽ��ϴ�.\n"
-"�̷� Ư���� ���ϼ���?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "�⺻ ����ڸ� �����ϼ���:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "����� ������ �Ŵ����� �����ϼ���:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "����� �� ������ �ּ���."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "��ġ�� �ٸ� �ٸ� �� �����Ҽ� �ֽ��ϴ�."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "���"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "����� �߰�"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "����� ����"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "���� ����"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"�� ��Ű���� �ݵ�� ���׷��̵�Ǿ�� �մϴ�.\n"
-"������ ������ �����Ͻðڽ��ϱ�?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "���"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "���ȿ� �Ű�Ⱦ�"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "����"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "ǥ��"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "����"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "����"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "�ְ�"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"�� ����� ����ҷ��� �ſ� �����Ͽ��� �մϴ�. �ý����� ����ϱ⿡�� \n"
-"�����ϰ����� �ſ� �ΰ��ϰ� �۵��մϴ�: ���ͳ��̳� ��Ʈ���� ����� �ý��ۿ�\n"
-"���δ� ������� ������. ��ȣ����� �����ϴ�."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"��ȣ����� ���������, ��Ʈ���� ����� ��ǻ�ͷ� ����ϱ⿡�� ���� �������� ��"
-"���ϴ�."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"�� ����� Ŭ���̾�Ʈ�μ� ���ͳݿ� �����ϴµ� ������ ǥ�� ���ȵ���Դϴ�.\n"
-"�� ��޺��� ������ �ý��� ���� ���˱���� �ֽ��ϴ�. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"�� ���ȵ������ �� �ý����� ������ ����� �� �ְ� �˴ϴ�.\n"
-"�� ���ȵ���� �ܺ��� Ŭ���̾�Ʈ���� ������ �޾Ƶ��̴µ� �־ \n"
-"����� ���� ���ȵ���Դϴ�. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"���� 4 ����� ����˴ϴ�. �ý����� ������ �ܺ����ٿ��� �ݸ��˴ϴ�.\n"
-"�ְ� ���� �����Դϴ�."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "���� �ܰ踦 ������ �ּ���"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "���� ����"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "������ ���� libsafe ���"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "���� ��ħ�̳� ����ȭ ���ڿ� ������ ���� ���̺귯��."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"%s �ü�� ���ñ⿡ ���� ���� ȯ���մϴ�!\n"
-"\n"
-"�� ����Ʈ���� �ü���� �����ϼ���.\n"
-"�׷��� ������ %d�� �Ŀ� �⺻������ �����մϴ�.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "�ü�� ������ GRUB�� ���Ű� ȯ���մϴ�."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "%cŰ�� %c�� ����Ͽ� ������ �׸��� �����ϼ���."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "���õ� �ü���� �����ҷ��� ���͸�, �����ҷ��� 'e'�� �����ּ���."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "������ ���ɵ� �Ǵ�, �������� ���ؼ��� 'c'�����ּ���."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "������ �׸����� %d���� �ڵ����� ���õ˴ϴ�."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "/boot�� ������ �����մϴ�."
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "����ũž"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "���� �޴�"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "��%s����Ƽ�ǿ� ��Ʈ�δ��� ��ġ�� �� �����ϴ�.\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "���� ������ �غ���� �ʾҽ��ϴ�.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "���� ��Ÿ�� ����"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/����(_F)"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/����(F)/����(_Q)"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "�� ��Ÿ�� ����ȭ �����"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "�� ��Ÿ�� �����"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "������ �����"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "������ GTK+ �����"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "���ý� ���ζ� ����"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "LILO/Grub ���"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot ���"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"���� ��Ʈ �����ڷ� %s�� ����ϰ� �ֽ��ϴ�.\n"
-"���� �����縦 �����Ϸ��� ���������� ��������."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "����"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "�ý��� ���"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "������ �� X-Window ����"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "�ƴϿ�, �ڵ��α����� ������� �ʽ��ϴ�."
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "��, �ڵ��α����� ����մϴ�."
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Ȯ��"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "��/etc/inittab�������� ���� �� �����ϴ�: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d ��"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 ��"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d ��"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "���̻� ��Ƽ���� �߰��� �� �����ϴ�."
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "��ġ�� �ٸ� �ٸ� �� �����Ҽ� �ֽ��ϴ�."
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "������"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "���⿡"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "����"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "�׸���"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "�븣����"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "������"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "��Ż����"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "�ø��� ���콺"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "���� �����͸� ����ϼ���."
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "���DZ��� ��������!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"���� aboot�� ����� ��ȹ�̶��, ��ũ�� ���ۺκп� ����� ���� (2048 ���� "
-"�� �����)\n"
-"�� ���⵵�� �����ϼ���."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "�ൿ�� �����ϼ���"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"�ϳ��� ū ���� ��Ƽ���� ������ �ֽ��ϴ�.\n"
-"(�Ϲ������� ����ũ�μ���Ʈ�� ����/��������� ���).\n"
-"���� �� ��Ƽ���� ũ�⸦ ������ ���� �����մϴ�.\n"
-"(�װ��� Ŭ������, \"ũ������\"�� Ŭ���ϼ���.)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "��Ƽ���� Ŭ���ϼ���"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "�󼼼���"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "����ȭ FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "�����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "��Ÿ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "���Ͻý��� ����:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "��ſ� ��%s���� ����մϴ�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "���𸶿�Ʈ���� ���� ����ϼ���"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "%s�� ��Ƽ�� ������ ������ �� ��Ƽ�dz��� ��� �ڷḦ �Ұ� �˴ϴ�."
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "��Ƽ�� ����"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "�߰� ��Ƽ�� ����"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "����"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "������ ���� ��ȯ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "�Ϲ� ���� ��ȯ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "�ǵ�����"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "����Ͻðڽ��ϱ�?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "�������� �ʰ� �����Ͻðڽ��ϱ�?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "��Ƽ���� ������� �ʰ� �����Ͻðڽ��ϱ�?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "��/etc/fstab���� ��������� �����Ͻðڽ��ϱ�?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "�ڵ� �Ҵ�"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "��� ����"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "�ϵ� ��ũ ����"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "��� ����Ƽ���� ������Դϴ�."
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "���̻� ��Ƽ���� �߰��� �� �����ϴ�."
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"�� ���� ��Ƽ���� ����Ƿ���, Ȯ�� ��Ƽ���� ����� �ֵ��� ����Ƽ�� �ϳ��� ����"
-"����."
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "��Ƽ�� ���̺� ����"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "��Ƽ�� ���̺� ����"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "��Ƽ�� ���̺� ����óġ"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "��Ƽ�� ���̺� �ٽ� �б�"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Ż���� �̵�� �ڵ� ����Ʈ"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "������ �����ϼ���."
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"��� ��Ƽ�� ���̺� ũ�Ⱑ ���� �ʽ��ϴ�.\n"
-"��� �Ͻðڽ��ϱ�?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "���"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"�÷��� ��ũ�� ����̺꿡 ��������\n"
-"�÷��� ��ũ�� ��� �ڷḦ �Ұ� �˴ϴ�."
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "��Ƽ�� ���̺� ���� �õ� ��..."
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "�ڼ��� ����"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "����Ʈ ��ġ"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "�ɼǵ�"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "ũ������"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "�̵�"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "����"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "����Ʈ"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "RAID�� �߰�"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "LVM�� �߰�"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "�𸶿�Ʈ"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "RAID��� ����"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "LVM����� ����"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAID ����"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "���������� ���"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "�� ��Ƽ�� �����"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "���� ����: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "ũ��(MB) :"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "���Ͻý��� ����: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "����Ʈ ��ġ: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "����� ����"
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "������ ������ �����մϱ�?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "��Ƽ�� ���� ����"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "� ���� �ý����� ���ϼ���?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "EXT2���� EXT3�� ����"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "%s������ ��� ���������� ����Ʈ �Ͻðڽ��ϱ�?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "��ġ %s�� ��� ����Ʈ �Ͻðڽ��ϱ�?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"�� ��Ƽ���� loopback���� �����Ǿ� �����Ƿ� ����Ʈ ����Ʈ�� �����Ҽ� ������"
-"��.\n"
-"loopback�� ���� �����ϼ���."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "���� ���Ͻý����� ���� �����"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "ũ�⺯��"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "�� ��Ƽ���� ũ�⺯���� ������ �ʽ��ϴ�."
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "�� ��Ƽ���� ��� ����Ÿ�� ����Ͽ��� �մϴ�."
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "%s ��Ƽ���� ũ�⸦ �����ϸ�, ��� ����Ÿ�� �ҰԵ˴ϴ�."
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "���ο� ũ�⸦ ������ �ּ���"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "���ο� �뷮(MB):"
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "� ��ũ�� �̵��ϰ� �����ʴϱ�?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "����"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "� ���͸� �̵��ϰ� �����ʴϱ�?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "�̵� ��"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "��Ƽ�� �̵� ��..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "�߰��� ���� RAID�� �����ϼ���."
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "���� �����"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "�߰��� LVM�� �����ϼ���"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM �̸�?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "�� ��Ƽ���� loopback���� ���� �� �����ϴ�."
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "������"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "������ ���� �̸�: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "���� �̸��� �Է��ϼ���."
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "�ٸ� �������� �� ������ ����ϰ� �ֽ��ϴ�, �ٸ� ���� ������ �ּ���."
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "������ �̹� �����մϴ�. �װ��� ����մϱ�?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "����Ʈ �ɼǵ�:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "�پ���"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "��ġ"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "����"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "ũ��"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "���� : �� ������ �����մϴ�."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "� ������ ��Ƽ���Դϱ�?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"�˼��մϴ�. /boot ���丮�� ����̺�󿡼� �������� �Ѿ �־� �����Ҽ� "
-"�����ϴ�. ( 1024 �Ǹ��� ���Ͽ����� �����մϴ�.\n"
-"LILO�� ����Ѵٰ� �ϴ��� �������� �ʰ�, LILO ��ü�� ����Ҽ��� �����ϴ�."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"������ root(/)�� ���������� 1024�Ǹ��� �ڿ� �ֽ��ϴ�.\n"
-"���� /boot ��Ƽ���� ������ �����ϴ�.\n"
-"LILO ��Ʈ �Ŵ����� ����Ϸ� �Ѵٸ�, �����ؼ� /boot ��Ƽ���� �߰��ϼ���."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"����Ʈ���� RAID ��Ƽ���� ��Ʈ(/)�� �����߽��ϴ�.\n"
-"��� ��Ʈ�δ��� /boot ��Ƽ�� ���̴� �̰��� ó������ ���մϴ�.\n"
-"�׷��Ƿ� /boot ��Ƽ���� �߰��ϴ� ���� ���� ������."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s ����̺��� ��Ƽ�� ���̺��� �����մϴ�."
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "����Ȱ��� �����ϱ� ���ؼ� �������� �ʿ��մϴ�."
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "%s ��Ƽ���� �����ϸ�, ��� ����Ÿ�� �Ұ� �˴ϴ�."
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "���� ��"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "loopback ���� %s ������"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "%s ��Ƽ�� ������"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "���� �����"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "�� ��Ƽ������ ���� �ȱ��"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"���丮 %s���� �̹� �����Ͱ� �ֽ��ϴ�.\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "�� ��Ƽ������ ���� �ȱ�� ��"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "%s ���� ��"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "%s ���� ��"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "��ġ: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS ����̺� ����: %s (���� ������ ����)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "����: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "�̸�:"
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "����: ���� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "ũ��: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ����"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "%d �Ǹ������� %d �Ǹ�������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "���˵Ǿ���\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "���� �ȵǾ���\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "����Ʈ �Ǿ���\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "���̵� ��ġ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"������ ����(��):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"�⺻������ ���õǴ� ��Ƽ��\n"
-"    (lilo�� ���Ѱ��� �ƴ϶� MS-DOS boot�� ���Ѱ���)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "%s ���\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "ũ�� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "���̵�-��ũ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "������ ���� �̸�: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"�� ��Ƽ���� ����̹� ��Ƽ���Դϴ�.\n"
-"�׳� �δ� ���� �����ϴ�.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"�� Ư���� ��Ʈ��Ʈ��\n"
-"��Ƽ���� �ý����� \n"
-"��� �����ϱ� ���� ���Դϴ�.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "ũ�� : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "��ġ: %s �Ǹ���, %s ���, %s ����\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "����: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-��ũ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "��Ƽ�� ���̺� ����: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "%d �����󿡼� ID %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "�ɼǵ�: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "���Ͻý��� ����: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "�� ��ȣ�� �ʹ� �ܼ��մϴ�.( ��� %d ���ڴ� �Ѿ�� �մϴ�)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "��ȣ�� ��ġ���� �ʽ��ϴ�."
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "���� ����"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "��ü�� Ŭ���ϼ���."
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS ����"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ���� ����(����̺� %s)"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "%s�� %s �����̹Ƿ� �����Ҽ� �����ϴ�."
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "���Ͻý��� ������ �����ڵ� %d �Ǵ� �ñ׳� %d�� �����Ͽ����ϴ�."
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s�� �𸶿�Ʈ�� �����߻�: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "�ܼ�ȭ"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "����"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "16MB �̸��� ��Ƽ�ǿ��� JFS ���� �ý����� ����� �� �����ϴ�."
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB �̸��� ��Ƽ�ǿ��� ReiserFS ���� �ý����� ����� �� �����ϴ�."
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "����Ʈ ��ġ�� �ݵ�� ��/���� �����Ͽ��� �մϴ�."
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "����Ʈ ��ġ %s�� �̹� �����մϴ�.\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr " %s ����Ʈ ����Ʈ�� LVM ���������� ����� ���� �����ϴ�. "
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "�� ���丮�� ��Ʈ ���Ͻý��� �ȿ� �־�� �մϴ�."
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"�� ����Ʈ ��ġ���� Ʈ�� ���Ͻý��� (ext2, reiserfs)�� ����Ʈ �Ǿ�� �մϴ�.\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr " %s ����Ʈ ����Ʈ�� LVM ���������� ����� ���� �����ϴ�. "
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "�ڵ��Ҵ��� ����ϱ⿡�� ������ �����մϴ�."
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "%s�� �������� ������ �����߻�: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"���� �߻� - ���ο� ���� �ý����� ���� � �ùٸ� ��ġ�� ã�� �� �����ϴ�.�� "
-"������ �ذ��Ͻ÷���, �ϵ��� ������ ���ñ� �ٶ��ϴ�."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "� ��Ƽ�ǵ� �������� �ʽ��ϴ�."
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"���õ� �ϵ��ũ���� ���� ������ ��Ƽ���� ���� ���ŵǾ� �ֽ��ϴ�.\n"
-"�����翡 ���� �̹� ������ ������ ������ ���� ������, �̴� ��κ��� �Ϲ�\n"
-"��ġ�� ������ �����Դϴ�. ���� ���� �����Ͻðڴٸ�, �ּ��� ��Ʈ ��Ƽ��"
-"(��/��)\n"
-"�� �ݵ�� �����ؾ� �մϴ�. �ʹ� ���� ��Ƽ���� ���������� ������. ����� ����"
-"Ʈ����\n"
-"�� ��ġ���� ���ϴ� ���� �ֽ��ϴ�. ���� ���� �����Ͱ� ������ ��Ƽ�ǿ� ����ǵ�"
-"��\n"
-"�ϰ� �ʹٸ�, ��/home����Ƽ���� ������ ���弼��.(���� ������ ��Ƽ���� �� �̻�"
-"��\n"
-"��쿡�� �����մϴ�.)\n"
-"\n"
-"�� ��Ƽ���� ������ ���� ���ŵ˴ϴ�: ���̸���,���뷮��.\n"
-"\n"
-"���̸��������� ����: ���ϵ��ũ ������,���ϵ��ũ ��ȣ��,\n"
-"����Ƽ�� ��ȣ��(����, ��hda1��).\n"
-"\n"
-"���ϵ��ũ ��������, IDE ��ũ�� ��쿡�� ��hd���̸�,\n"
-"SCSI ��ũ�� ��쿡�� ��sd���Դϴ�.\n"
-"\n"
-"���ϵ��ũ ��ȣ���� �׻� ��hd���Ǵ� ��sd���ڿ� ���� �����Դϴ�.\n"
-"IDE �ϵ��ũ�� ���:\n"
-"\n"
-"  �� ��a���� ���� IDE �������� �� ��ũ���� �ǹ��մϴ�.\n"
-"\n"
-"  �� ��b���� ���� IDE �������� ���� ��ũ���� �ǹ��մϴ�.\n"
-"\n"
-"  �� ��c���� ������ IDE �������� �� ��ũ���� �ǹ��մϴ�.\n"
-"\n"
-"  �� ��d���� ������ IDE �������� ���� ��ũ���� �ǹ��մϴ�.\n"
-"\n"
-"SCSI �ϵ��ũ�� ���, ��a���� ���ּ� SCSI ID��, ��b���� ������ �ּ� SCSI "
-"ID��\n"
-"�� ���� ������ �ǹ̸� �����ϴ�."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"�ǵ巹��ũ ������ ��ġ �ý����� ���� ���� CD�� �����Ǿ� �ֽ��ϴ�.\n"
-"�巹��ũX�� ���õ� ������ ��Ű���� ��� CD�� ��� �ִ��� �̹� �˰� �ֽ���"
-"��.\n"
-"�ʿ�� ���� CD�� �ڵ����� ������ �ٸ� CD�� ������ ��û�� ���Դϴ�."
-
-#: ../../help.pm_.c:77
-#, fuzzy
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"���� �ý��ۻ� ��ġ�� ���α׷����� ������ �����Դϴ�.\n"
-"�ǵ巹��ũ ���������� ��ġ�� �� �ִ� ��õ ���� ���α׷����� �ֱ� ������\n"
-"����ڰ� �װ͵��� ��� �� ������ ���� ���Դϴ�.\n"
-"\n"
-"���� ǥ�� CD ��ġ�� �����ϰ� �ִ� ���̶��, ���� ������ �ִ� CD�鿡 ����\n"
-"������ ���Դϴ�. ������ �ִ� CD���� ���� Ȯ���ϰ� ���� ���� ��Ȳ�� �´�\n"
-"���� ���ڸ� �����ϼ���. ����� �غ� �Ǿ�����, ��Ȯ�Ρ��� ��������.\n"
-"\n"
-"��Ű������ �뵵�� ���� �׷����� �����Ǿ� �ֽ��ϴ�.\n"
-"�׷�� ��ü�� �Ǵٽ� �� ���� �������� �����Ǿ� �ֽ��ϴ�:\n"
-"\n"
-"  �� ����ũ�����̼ǡ�: �ý����� ��ũ�����̼����� ����� ��ȹ�̶��,\n"
-"�ϳ� �̻��� �ش� �׷��� �����ϼ���.\n"
-"\n"
-"  �� �����ߡ�: �ý����� ���α׷����� �뵵�� ����Ϸ� �Ѵٸ�, ���ϴ� �׷����\n"
-"�����ϼ���.\n"
-"\n"
-"  �� ��������: ������, �ý����� �����DZ⸦ ���Ѵٸ�, ���⼭ ��κ��� �Ϲ� ����"
-"������\n"
-"��ġ�ǵ��� ������ �� �ֽ��ϴ�.\n"
-"\n"
-"  �� ���׷��� ȯ�桹: ����� ���� ��ȣ�ϴ� �׷��� ȯ���� �����ϴ� ���Դϴ�.\n"
-"�׷��� ȯ�� ��ũ�����̼��� ���Ѵٸ�, �ּ��� �ϳ��� �����ؾ� �մϴ�!\n"
-"\n"
-"���콺 �����͸� �׷� �̸��� ���� �ø���, �ش� �׷쿡 ���� ���� dz�� ����"
-"��\n"
-"���� �� ���Դϴ�.\n"
-"\n"
-"������ ��Ű�� ���á��ɼ��� ������ ���� �ֽ��ϴ�.\n"
-"�� �ɼ��� ���� �����Ǿ����� ��Ű���鿡 ���� �� �˰� �ְų�, ��ġ�Ǵ� ��Ű����"
-"�� ����\n"
-"��ü���� ��� ���� ��쿡 ������ ���Դϴ�.\n"
-"\n"
-"���� ���� ��������Ʈ������ ��ġ�� �����ߴٸ�, ������ ��ġ���� ���� ��Ű����"
-"��\n"
-"��ġ�Ǵ� ���� �������� ��� �׷��� ���������� �� �ֽ��ϴ�. �̷��� �ϴ� ����\n"
-"���� �ý����� ������Ʈ�ϰų� ��ġ�� ���� ���� ����Դϴ�."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-#, fuzzy
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"�� ��ǻ�͸� ���ͳ��̳� ���� ��Ʈ���� �����ϰ� �ʹٸ�, �ùٸ� �ɼ���\n"
-"�����ϼ���. �ɼ��� �����ϱ� ���� ��Ʈ�� ��ġ�� ������ �����ִ���\n"
-"Ȯ���ؼ� �巹��ũX�� �ڵ������� �� �ֵ��� �ϼ���.\n"
-"\n"
-"�ǵ巹��ũ ������������ ��ġ�ÿ� ���ͳ� ������ �ϴ� ���� ���� ��� ������"
-"��.\n"
-"��ȿ�� ���� ����: ������ ��, ISDN ��, ADSL ����, ���̺� ��, LAN ����(��"
-"����)\n"
-"\n"
-"�ڼ��� ���� ������ ���⼭ �������� ���� ���Դϴ�. ��� ���ڵ鿡 ���� ������\n"
-"���ͳ� ���� �����ڳ� ��Ʈ�� �����ڿ��� �����ؼ� �˾� ������.\n"
-"\n"
-"����� �������� ����, ���ͳ� ���ῡ ���� �ڼ��� ������ ���� �� �ֽ��ϴ�.\n"
-"�Ǵ� �ý����� �� ��ġ�� ������ ��ٸ� �Ŀ�, �������� ���� �ִ� ���α׷��� ��"
-"���Ͽ�\n"
-"������ ������ ���� �ֽ��ϴ�.\n"
-"\n"
-"��Ʈ�� ������ ��ġ�� �����Ŀ� �ϰ� �Ͱų�, ��Ʈ�� ������ ����ģ ���¶��,\n"
-"����ҡ��� ������ ��� �����ϼ���."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"���� ���ýÿ� � ���񽺸� �ڵ����� �����ϰ� ������ �����ؾ� �մϴ�.\n"
-"\n"
-"���� ��ġ�� ��� ���񽺵��� ���⿡�� �������� �ֽ��ϴ�.\n"
-"�����ϰ� �����ؼ� ���ýÿ� �׻� �ʿ���ϴ� ���� �ƴ϶�� ������ �����ϼ���.\n"
-"\n"
-"���콺�� ���� �̸��� ���� �ø���, �� ���񽺿� ���� ������ ������ ���� �� ��"
-"�Դϴ�.\n"
-"���� � ���񽺰� �ʿ��� ������ �ƴ����� �� �𸣰ڴٸ�,\n"
-"�⺻������ �׳� �δ� ���� ������ �����Դϴ�.\n"
-"\n"
-"�� ��ǻ�͸� ���������� ����Ϸ� �Ѵٸ�, �� �ܰ迡�� �ſ� �����ؾ� �մϴ�.\n"
-"�ʿ����� ���� ���񽺰� ���۵Ǵ� ���� �ٶ������� �ʽ��ϴ�. �Ϻ� ���񽺴� \n"
-"�����󿡼� ���ڵȴٸ� ������ ���� �ִٴ� ���� �����ϼ���. ��Ģ������ \n"
-"�� �ʿ��� ���񽺵鸸 �����ϼ���."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-#, fuzzy
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X(X ������ �ý���)�� GNU/������ �׷��� �������̽��� �ٽ��Դϴ�.\n"
-"�̸� ������� �ǵ巹��ũ �������� ���Ե� ��� �׷���ȯ��(KDE, �׳�,\n"
-"�����ͽ���, ���������Ŀ...)�� �۵��մϴ�. �̹� �ܰ迡�� �巹��ũX��\n"
-"X�� ���� ������ �õ��� ���Դϴ�.\n"
-"\n"
-"���� ������(�Ǵ� ���� �ֽ���) �ϵ��� �ƴ϶��, ������ ������ ����\n"
-"���� ���� ���Դϴ�. ������ �����ϸ�, �ش� ������� ũ�⿡�� ������\n"
-"�ְ� �ػ󵵷� �ڵ� �׽�Ʈ�� ������ ���Դϴ�.\n"
-"�׽�Ʈ���� â�� �ϳ� ���� �Կ��� ���̴��� ������ ���Դϴ�.\n"
-"\n"
-"���� �������������� ��ġ ���̶��, ���� X���� �������\n"
-"�ȳ��� ���Դϴ�. �� �����翡 ���� �� �ڼ��� ������ ������,\n"
-"����� �������� �ش� �κ��� �����ϼ���.\n"
-"\n"
-"���� �׽�Ʈ â�� �۾��� �� �� �ְ� �������� ������, �巹��ũX�� ���� �ܰ��\n"
-"������ ���Դϴ�. ���� �۾��� �˾ƺ� �� ���ٸ�, ������ �� ���Ǿ��ٴ� ����\n"
-"�ǹ��մϴ�. �׽�Ʈ�� 10���Ŀ� ȭ���� �����ϸ鼭 �ڵ�����\n"
-"�����մϴ�."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"ó�� X ������ �õ��� ��, ȭ���� �̻��ϰ� ���� �� �ֽ��ϴ�.\n"
-"(ȭ���� �ʹ� �۰ų�, ������ Ȥ�� �������� ġ���� ���� �� �ֽ��ϴ�.)\n"
-"�׷��� ������, ��� X�� ���� ����Ǵ��� �巹��ũX�� �Բ� ������\n"
-"���������� ������ ���Դϴ�. ���� ���� ������ �� �ִ� ��ȿ�� ȭ�������\n"
-"����� ǥ���ؼ� ���� ������ �� �ְ� �� ���Դϴ�.\n"
-"\n"
-"�ƹ��� �ص� X�� ���������� �۵��ǰ� �� �� ���ٸ�, ���׷��� ī�� ���桹�� ����"
-"�ϰ�\n"
-"����Ͽ� ���� ī�塹�� �����ϼ���. �׸��� ���� ������ ������ ��, ��FBDev��"
-"��\n"
-"�����ϼ���. �̰��� ������� �ɼ��̸� ������ ��� �׷��� ī��� ȣȯ�˴ϴ�.\n"
-"�׸��� ����, ���ٽ� �׽�Ʈ���� �����Ͽ� Ȯ���ϼ���."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"����������, ���ýÿ� �ڵ����� �׷��� ȯ���� ����� �������� ������ ���Դ�"
-"��.\n"
-"����: �� ������ ������ �׽�Ʈ���� �ʾ������� ��Ÿ���� �� ���Դϴ�.\n"
-"�ý����� Ȯ���� ���������� ����� ���̰ų�, ȭ�� ������ �������� ���� ����"
-"��\n"
-"���ƴϿ����� ��������."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"���� �ϵ��ũ�� ��� ������ �ǵ巹��ũ�� ��ġ������\n"
-"�����ؾ� �մϴ�. ���� �ϵ��ũ�� ������ ��� �ְų� �Ǵ�\n"
-"�ٸ� �ü���� �ϵ��ũ ��ü�� �����ϰ� �ִٸ�, ��Ƽ����\n"
-" ������� �մϴ�. ��Ƽ���� ���������� ������ �ǵ巹��ũ��\n"
-"��ġ�� ������ Ȯ���ϱ� ���Ͽ� ��ũ�� ���������� �����Ѵٴ� �ǹ��Դϴ�.\n"
-"\n"
-"�Ϲ������� ��Ƽ�� ������ ���� ������ ���� �������� ������ �Ұ���������\n"
-"������,�ʺ��ڿ��Դ� ���ν����� ���������� �۾��Դϴ�. ������ �����縦\n"
-"����ϸ� �� �۾��� ���� �� �� �ֽ��ϴ�. �����ϱ� ����, ����� �ð��� ������\n"
-"����� �������� �о� ������.\n"
-"\n"
-"���� ������ ���� ��ġ�� ���� ���̶��, ������ �ǵ巹��ũ�� ��Ƽ�� ���� ����"
-"��\n"
-"��ũ�巹��ũ�� ������ �� ���Դϴ�. �� ������ ��Ƽ�ǵ帣�� ������ ������ ��"
-"���ϰ�\n"
-"�մϴ�. �������� ��ũ�巹��ũ ���� ������; ������ �����մϴ�. ������ ���"
-"�ߵ���\n"
-"ȭ�鿡 �ִ� �������硹��ư�� ������, ��Ƽ�� ���� �۾��� ���� �����縦\n"
-"������ ���� �ֽ��ϴ�.\n"
-"\n"
-"���� ������ �������� ��ġ�� ���� �ְų� �ٸ� ��Ƽ�� ������ ����� ���� ������"
-"��\n"
-"��Ƽ�ǵ��� �̹� �����Ѵٸ�, ������ ��ġ�� ����� ��Ƽ�ǵ���\n"
-"���ø� �ϸ� �˴ϴ�.\n"
-"\n"
-"���� ���� �������� ��Ƽ���� ���ٸ�, ���� ������ �մϴ�. �׷��� ���ؼ���\n"
-"���� �ִ� �����縦 ����ϼ���. �ϵ��ũ�� ������ ���� ������ ����\n"
-"�� ������ ����� �ֽ��ϴ�:\n"
-"\n"
-" �� �� ���� ���: �� ��ũ�� �ڵ� ��Ƽ�� ���� �۾��� �ϰ� �˴ϴ�.\n"
-"��Ƽ�� ���� �۾��� ���� �� �̻� �Ű澵 �ʿ䰡 ���� �˴ϴ�.\n"
-"\n"
-" �� ���� ��Ƽ�� ���: �����簡 ������ ������ ��Ƽ���� �߰��� ����Դϴ�.\n"
-"������ ��Ƽ�ǿ��ٰ� �������� ��ġ�ҷ���, �̰��� �����ϼ���.\n"
-"\n"
-" �� �������� ��Ƽ���� �� ���� ���: ���� MS ������� ��ġ�Ǿ� �ְ� ��� ��"
-"ũ ������ ����ϰ� �ִٸ�,\n"
-"�������� ������ ���� ������ �մϴ�. �̷��� �ϱ����ؼ���, �������� ��Ƽ���� "
-"����ų�(����ü ��ũ ������\n"
-"�� �������� ��塹�κ��� �����ϼ���.), �������� ��Ƽ���� ũ�⸦ �������Ͽ� ��"
-"���� Ȯ���� �� �ֽ��ϴ�. ��������\n"
-"��Ƽ���� �������� ������ �����͸� �ı����� �ʱ� ������, ��������� ������ ��"
-"�巹��ũ�� �� ��ǻ�Ϳ��� �Բ�\n"
-"����ϰ��� �Ѵٸ�  �̰��� ����Ǵ� ����Դϴ�.\n"
-"\n"
-"�� ����� �����Ѵٸ�, �������� ��Ƽ���� ũ�Ⱑ ���纸�� �پ��� ������ ����"
-"���\n"
-"����� ������ ����Ʈ��� ��ġ�ϰų� �����͸� ������ �� ������ �׸�ŭ ������"
-"�ٴ�\n"
-"���� �����ϼ���.\n"
-"\n"
-" �� ��ü ��ũ ����: ���� ��ũ���� ��� ���� ��Ƽ�ǰ� �����͸� �����ϰ�\n"
-"������ �ǵ巹��ũ�� ���� ��Ƽ������ �ٲٰ� �ʹٸ�, �̰��� �����ϼ���.\n"
-"�����ϼ���: �ϴ� �̷��� �ϰ����� �ٽ� �ǵ��� �� �����ϴ�.\n"
-"\n"
-"   !! �� �ɼ��� �����ϰ� �Ǹ�, ��ũ���� ��� �����Ͱ� �սǵ˴ϴ�. !!\n"
-"\n"
-" �� �������� ����: ��ũ���� ��� ��Ƽ���� �����ϰ�, �ʱ�ȭ�� ��ũ ���¿�"
-"��\n"
-"��Ƽ�� �۾��� �ٽ� �մϴ�. ��ũ���� ��� �����ʹ� �սǵ˴ϴ�.\n"
-"\n"
-"   !! �� �ɼ��� �����ϰ� �Ǹ�, ��ũ���� ��� �����Ͱ� �սǵ˴ϴ�. !!\n"
-"\n"
-" �� ������ ���: ���� �������� ��Ƽ�� �۾��� �ϰ��� �Ѵٸ�, �̰��� �����ϼ�"
-"��.\n"
-"�� ����� ����� ���������� ���� ������ �� �ִٴ� ���� �����ϼ���. ���� ����"
-"�͸�\n"
-"�Ҿ� ���� �� �ֽ��ϴ�. �������� ������ ���ٸ�, �� ����� ���� �������� ����"
-"��."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"��ġ�� �Ϸ��Ͽ����ϴ�. ���� GNU/������ �ý����� ���� ����� �غ�\n"
-"�Ǿ����ϴ�. �ý����� �ٽ� �����Ϸ��� ��Ȯ�Ρ��� ��������.\n"
-"��ǻ�Ͱ� �ٽ� ���õǸ�, (���� ������ �����Ǿ��� ��쿡) ���� ��ȣ�ϴ�\n"
-"�ü���� ������ �� �ֽ��ϴ�.\n"
-"\n"
-"�����ޡ���ư(������ ��忡�� ����)�� ������ �� ���� �߰� ��ư�� ��Ÿ�Ҵϴ�:\n"
-"\n"
-"  �� ���ڵ� ��ġ �÷��� ������: ���� ���ݱ��� ��ġ�� ������ �������� ���ٸ�\n"
-"������� �ڵ����� ��ü ��ġ�� �����ϰ� �ϴ�\n"
-"�ڵ� ��ġ �÷��� ��ũ�� ����ϴ�.\n"
-"\n"
-"    ����: ��ư�� ������ �� ���� �������� �ɼ��� ��Ÿ���ϴ�:\n"
-"\n"
-"    �� �������: ��Ƽ�� ������ �۾��� �����ϰ�, ������ ������ �ڵ���ġ��\n"
-"�����ϴ� �ڵ���ġ �÷��Ǹ� ����ϴ�.\n"
-"\n"
-"    �� ���ڵ�ȭ��: ��ũ���� ��� �����͸� �����ϰ� ��� ��Ƽ���� �ٽ�\n"
-"��������� �Ϻ��� �ڵ� ��ġ�� �����ϴ� �÷��Ǹ� ����ϴ�.\n"
-"\n"
-"    �� ����� ����ϸ�, ���� ���� ����� ��ǻ�Ϳ� ��ġ�۾��� �� �� �����մ�"
-"��.\n"
-"    �ڼ��� ������ ���� ������Ʈ�� �ڵ���ġ���� �κ��� �����ϼ���.\n"
-"\n"
-"  �� ����Ű�� ���û��� ���塹(*): �� �ܰ迡�� ������ ��Ű�� ����� �����մ�"
-"��.\n"
-"�� �ٸ� ��ġ�� ������ ��, �÷��Ǹ� ����̺꿡 �ְ�, [F1]Ű�� ������\n"
-"��ġ ȭ���� ���� ȭ������ ���� ����, ��linux defcfg=\"floppy\"�����\n"
-"�Է��ϼ���.\n"
-"\n"
-"(*) ���� FAT���� ���˵� �÷��� �ϳ��� ������ �־�� �մϴ�.\n"
-"      (���������� �����Ϸ���, ��mformat a:�������� ����ϼ���.)"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"���� ������� ��Ƽ�ǵ��� ���˵Ǿ����� �մϴ�.\n"
-"(�����̶� ���� ���� �ý����� ����ٴ� �ǹ��Դϴ�.)\n"
-"\n"
-"���� ������ �����͸� �����ϱ� ���ؼ� ���� ��Ƽ�ǵ���\n"
-"�ٽ� ������ ���� �ֽ��ϴ�. �׷��� �ϰ� �ʹٸ�, �ش� ��Ƽ�ǵ鵵\n"
-"�����ϼ���.\n"
-"\n"
-"����: ��� ���� ��Ƽ�ǵ��� �ٽ� ������ �ʿ�� �����ϴ�.\n"
-"(��/��,��/usr��,��/var���� ����) �ü���� ��� �ִ� ��Ƽ�ǵ���\n"
-"�ٽ� �����ϴ���, (��/home���� ����) �����͸� �ܰ� �ִ� ��Ƽ�ǵ���\n"
-", ���� �����͸� �����ϰ� ���� ���, �ٽ� ������ �ʿ䰡 �����ϴ�.\n"
-"\n"
-"��Ƽ�ǵ��� ������ �� �����ϼ���. �ϴ� ������ �ǰ�����,\n"
-"���õƴ� ��Ƽ�ǻ� �����ߴ� ��� �����ʹ� �����Ǹ�,\n"
-"������ �Ұ����� ���ϴ�.\n"
-"\n"
-"������ �غ� �Ǿ�����, ��Ȯ�Ρ��� ��������.\n"
-"\n"
-"�ǵ巹��ũ ������ ��ġ�� ��Ƽ���� �ٽ� �����ϰ� �ʹٸ�,\n"
-"����ҡ��� ��������.\n"
-"\n"
-"��ũ���� �ջ�� ������ üũ�ϸ� �����ϰ� �ʹٸ�,\n"
-"�����ޡ��� ��������."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"���� �� ������ �ǵ巹��ũ �ü���� ��ġ�ϰ� �ֽ��ϴ�.\n"
-"�� �۾��� ������ ���ؼ��� �ð��� �� �ɸ��ϴ�.\n"
-"�Ѽҿ� �ð��� ������ ��Ű���� ��� ��ǻ�� ���ɿ� ���� ũ�� �޶��� �� �ֽ���"
-"��.\n"
-"\n"
-"����� ��������."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"�� �����ϱ� ���� ����� ��༭�� �ڼ��ϰ� �о� ������.\n"
-"����� ��༭�� ��ü �ǵ巹��ũ ������ �������� �����ϴ� �����̸�,\n"
-"���� �������� �����Ŵٸ� ���źΡ���ư�� ��������. �ź� ��ư�� ���� ��ġ��\n"
-"�ﰢ �����ϰ� �մϴ�. ��ġ�� ����ϰ� �ʹٸ� �����ǡ���ư�� ��������."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"���� ��ǻ���� ���� ������ ������ �ܰ��Դϴ�.\n"
-"�����ο� ����� ���ؼ��� ��ǻ�Ͱ� ���� �� ���� ����Ǿ����� �ϸ�,\n"
-"����� �������� �߿伺�� ũ�� Ŭ����, �� ���� ���� ������ �����Ǿ�� �մ�"
-"��.\n"
-"�׷��� �Ϲ������� ���� ���� ���� ������ ���� ���� ������ �������� �����ؾ�"
-"��\n"
-"�̷���� �� ������ �����ϼ���. �� ���� ������ �ǹ��ϴ� �ٿ� ���� �ڼ��� ����"
-"��\n"
-"�˰� �ʹٸ� ������� ��ħ������ MSEC ���� �����ϼ���.\n"
-"\n"
-"��� ���� �����ؾ� ���� �� �𸣰ڴٸ�, �⺻���� �����ϼ���."
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"���� ��� ��Ƽ���� �ǵ巹��ũ �������� ��ġ������ ���Ǿ�� ������\n"
-"�����ؾ� �մϴ�. ������ �ٸ� GNU/�������� ��ġ�� ���� �ְų�, �ٸ� ��Ƽ��\n"
-"������ ����Ͽ� �̹� ��Ƽ�ǵ��� ���ǵǾ� �ִٸ�, ���� ��Ƽ���� �״�� ���\n"
-"�� �� �ֽ��ϴ�. �׷��� �ʴٸ� �ϵ��ũ�� ��Ƽ�ǵ��� ���� ������ �մϴ�.\n"
-"\n"
-"��Ƽ���� �������, ���� �ϵ��ũ�� �����ϼ���. ��Ƽ���� ���鿩�� �ϵ��ũ"
-"��\n"
-"ù ��° IDE ��ũ��� ��hda��, �� ��° IDE ��ũ��� ��hdb���� ���� ����"
-"��,\n"
-"ù ��° SCSI ��ũ��� ��sda���� ���� ���Դϴ�.\n"
-"\n"
-"��Ƽ���� ���� ��, ���� �ɼ��� ����� �� �ֽ��ϴ�:\n"
-"\n"
-"  �� ����� ������: ���õ� ��ũ�� ��� ���� ��Ƽ���� �����մϴ�.\n"
-"\n"
-"  �� ���ڵ� �Ҵ硹: ���õ� ��ũ�� �� ������ �ڵ����� EXT2�� ���� ��Ƽ����\n"
-"�Ҵ��մϴ�.\n"
-"\n"
-"  �� ����Ƽ�� ���̺� ������: ��Ƽ�� ���̺��� �ջ�Ǿ� ���� ���, �� �ɼ�����\n"
-"�ջ�� ���̺��� �����մϴ�. !!����!! �����õ��� ������ ���� �ִٴ� ����\n"
-"�����ϼ���.\n"
-"\n"
-"  �� ���ǵ����⡹: ���� ������ ����մϴ�.\n"
-"\n"
-"  �� ���ٽ� �б⡹: ��� ���� ������ ����ϰ�, �ʱ� ��Ƽ�� ���̺��� �ٽ� �н�"
-"�ϴ�.\n"
-"\n"
-"  �� �������硹: �����縦 �����Ͽ� ��Ƽ���� �����ϴ�. ��Ƽ�� �����⿡ ���� ��"
-"����\n"
-"�����ϴٸ�, �� �ɼ��� ����ϼ���.\n"
-"\n"
-"  �� ���÷��Ƿκ��� ������: ������ �÷��ǿ� �����ص� ��Ƽ�� ������ ����Ͽ�\n"
-"��Ƽ�� ���̺��� �����մϴ�.\n"
-"\n"
-"  �� ���÷��ǿ� ���塹: ��Ƽ�� ������ �÷��ǿ� �����մϴ�. ������ ��Ƽ�� ����"
-"���� ������\n"
-"���� ���� �� ���˴ϴ�. �� ������ ������ ���� �����ϴ� ���Դϴ�.\n"
-"\n"
-"  �� ���Ϸ᡹: ��Ƽ�� ������ �۾��� ����ġ��, �� �ɼ����� ���� ������ �����մ�"
-"��.\n"
-"\n"
-"����: Ű����� �ɼ��� ������ ���� �ֽ��ϴ�. ��Ƽ�ǵ鰣�� �̵��� [Tab]Ű��\n"
-"[Up/Down]Ű�� ����ϼ���.\n"
-"\n"
-"��Ƽ���� �����ϰ� �� �Ŀ��� ���� Ű�� ����� �� �ֽ��ϴ�:\n"
-"\n"
-"  �� ��Ctrl + c��: (�� ��Ƽ���� ���õ� ���,) �� ��Ƽ�� �����.\n"
-"\n"
-"  �� ��Ctrl + d��: ��Ƽ�� �����ϱ�.\n"
-"\n"
-"  �� ��Ctrl + m��: ����Ʈ ��ġ �����ϱ�.\n"
-"\n"
-"���� PPC ��ǻ�Ϳ��� ��ġ�ϰ� �ִ� ���̶��, YABOOT ��Ʈ�δ��� ����� �ּ� "
-"1MB\n"
-"�� HFS ����Ʈ��Ʈ������Ƽ���� ���� �ʿ䰡 �ֽ��ϴ�. ���� �� ��Ƽ���� ���� ũ"
-"��\n"
-"(����, 50MB) �����, ���� ��Ȳ�ÿ� ����� ������ Ŀ�ΰ� ����ũ �̹�����\n"
-"������ �� �ִ� ������ ��Ұ� �� ���Դϴ�."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"�� �̻��� MS �������� ��Ƽ���� ��ũ�󿡼� �߰ߵǾ����ϴ�.\n"
-"�ǵ巹��ũ ������ �ü���� ��ġ�ϱ� ���� ũ�⸦ ������\n"
-"��Ƽ���� �����ϼ���.\n"
-"\n"
-"�� ��Ƽ���� ������ ���� ���ŵ˴ϴ�: �������� �̸���,���������� �̸���,\n"
-"���뷮��.\n"
-"\n"
-"�������� �̸��������� ����: ���ϵ��ũ ������,���ϵ��ũ ��ȣ��,\n"
-"����Ƽ�� ��ȣ��(����, ��hda1��).\n"
-"\n"
-"���ϵ��ũ ��������, IDE ��ũ�� ��쿡�� ��hd���̸�,\n"
-"SCSI ��ũ�� ��쿡�� ��sd���Դϴ�.\n"
-"\n"
-"���ϵ��ũ ��ȣ���� �׻� ��hd���Ǵ� ��sd���ڿ� ���� �����Դϴ�.\n"
-"IDE �ϵ��ũ�� ���:\n"
-"\n"
-"  �� ��a���� ���� IDE �������� �� ��ũ���� �ǹ��մϴ�.\n"
-"\n"
-"  �� ��b���� ���� IDE �������� ���� ��ũ���� �ǹ��մϴ�.\n"
-"\n"
-"  �� ��c���� ������ IDE �������� �� ��ũ���� �ǹ��մϴ�.\n"
-"\n"
-"  �� ��d���� ������ IDE �������� ���� ��ũ���� �ǹ��մϴ�.\n"
-"\n"
-"SCSI �ϵ��ũ�� ���, ��a���� ���ּ� SCSI ID��, ��b���� ������ �ּ� SCSI "
-"ID��\n"
-"�� ���� ������ �ǹ̸� �����ϴ�.\n"
-"���������� �̸����� MS ���������Ͽ����� �̸��Դϴ�.\n"
-"(����, ù ��° ��ũ �Ǵ� ��Ƽ���� ��C:���Դϴ�.)"
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "��ٷ� �ּ���. �� �۾��� �� ���� �ð��� �ɸ��ϴ�."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"���� ���� �⺻��ġ(�����塹) ����� ���� �ɵ��ִ� ������ �� �� �ִ�\n"
-"������������ġ ��� �� �ϳ��� �������� �����ؾ߾� �մϴ�. ���� ���ο� ��ġ"
-"��\n"
-"������ ������ �ǵ巹��ũ �ý����� ���׷��̵� �� �ϳ��� ������ ���� �ֽ���"
-"��.\n"
-"���� ���� ��Ȳ�� ������ ���� �����ϼ���.����ġ���� �����ϰ� �Ǹ�\n"
-"������ �ý����� ������ �����ϰ� �ٽ� ��ġ�ϰ� �˴ϴ�. �����׷��̵塹��\n"
-"�����ϰ� �Ǹ� ������ �ý����� �ֽ� �ý������� ���׷��̵� �մϴ�.\n"
-"\n"
-"���� ���� ������ ������ �ǵ巹��ũ�� ��ġ�Ǿ� ���� �ʰų�, \n"
-"���� �ü���� �Բ� ����ϰ� �ʹٸ�, ����ġ���� ��������.\n"
-"\n"
-"���� �̹� ��ġ�� ���� ������ ������ �ǵ巹��ũ�� ������Ʈ�Ϸ���,\n"
-" ��������Ʈ���� ��������.\n"
-"\n"
-"���� GNU/Linux�� ���� ���� ���ؿ� ����, ���� ������ �ǵ巹��ũ��\n"
-"��ġ �Ǵ� ������Ʈ�ϴ� ������ ���� ����� ������ �� �ֽ��ϴ�:\n"
-"\n"
-" �� ����: ���� ���� GNU/Linux�� ����� �� ������ ���ٸ�, �̰��� �����ϼ���.\n"
-"��ġ������ ���� ���� ���� �� ���� �������� ���ϸ� �˴ϴ�.\n"
-"\n"
-" �� ������: ���� ���� GNU/Linux�� ���� ����� ������ ������ �ִٸ�, �̰��� ��"
-"���ϼ���.\n"
-"������� ���ǡ� ��ġó�� �ֿ뵵(��ũ�����̼�, ����, ����)�� ������ �� �ֽ���"
-"��. \n"
-"�̰��� �����ϱ⿡ �ռ� �ſ� �����ϼ���. ���� ������ ����� ���� ��ġ�� ������"
-"�� �˴ϴ�.\n"
-"GNU/Linux�� ���ؼ� �� �𸥴ٸ�, ������ ���ϱⰡ �ſ� ����� �� �ֽ��ϴ�.\n"
-"���� Ȯ���� ���� �ʴ´ٸ� �� ��ġ����� �������� ������."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"�Ϲ�������, �巹��ũX�� (���� ������ �� ����Ͽ�) �ùٸ� Ű���带\n"
-"�ڵ����� �����մϴ�. �׷��� ���� ����ϴ� �� ��Ȯ�� ��ġ�ϴ� Ű���带\n"
-"������ ���� �ʴ� ��쵵 ���� �� �ֽ��ϴ�: ����, ��� ����ϴ� ����������\n"
-"������ ������ Ű���带 ���� ���� �ֽ��ϴ�. ���� ��� ���������, ij���� ��"
-"���ֿ�\n"
-"��� �ִٸ� ���� �̷��� ��찡 �� ���Դϴ�. �̷����� �����, �� �ܰ迡��\n"
-"������ Ű���带 ��Ͽ��� �����ؾ� �մϴ�.\n"
-"\n"
-"�����Ǵ� ��� Ű���� ����� ������, ���߰���������\n"
-"��������."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"��ġ�� �׸��� �ý��ۿ����� ����� �� �����ϼ���.\n"
-"\n"
-"�����ޡ��� ������, �ٸ� �� �߰��� ������ �� �ֽ��ϴ�.\n"
-"�ٸ� �� �����ϰ� �Ǹ�, �� ���� ���õ� �ý��� ���� �� ���α׷� ���ϵ�"
-"��\n"
-"��ġ�ϰ� �˴ϴ�. ����, ���� �ý����� �Ϻ��ε� ����� �� �ֵ��� �ϰ� �ʹٸ�,\n"
-"��Ͽ��� �� ���� ���ѱ���� �����ϰ�, �����ޡ����� ���Ϻ���� �ش���"
-"��\n"
-"ȸ�� ��ǥ�� �����ϼ���.\n"
-"\n"
-"�������� �߰� �� ������ ���� �ֽ��ϴ�. ��� ������ ����������,\n"
-"��Ȯ�Ρ��� ������ ��� �����ϼ���."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"�⺻������ �巹��ũX�� ���� 2��ư ���콺�� ����Ѵٰ� ������ ���̸�,\n"
-"�� ��° ��ư�� ���ķ��̼��� ���Դϴ�. ���콺�� PS/2, �ø���, Ȥ�� USB������"
-"��\n"
-"�巹��ũX�� �ڵ����� �˾Ƴ� �� �ֽ��ϴ�.\n"
-"\n"
-"���� �ٸ� ���콺 ������ �����ϰ� �ʹٸ�, �����Ǵ� ��Ͽ��� ������ ����\n"
-"�����ϼ���.\n"
-"\n"
-"���� �ٸ� ���콺��  �����ϰ� �Ǹ�, ���콺 �׽�Ʈ ȭ���� ���Ե� ���Դϴ�.\n"
-"�׷���, ���콺 ��ư�� ���� �����Ͽ� ������ ��Ȯ�ϰ� �Ǿ����� Ȯ���ϼ���.\n"
-"���� ����� �۵��ϱ� ������,����ҡ���ư ������ �����̽� Ű�� ���� Ű��\n"
-"������ �ٽ� �����Ͻñ� �ٶ��ϴ�."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"��Ȯ�� ��Ʈ�� �����ϼ���. ���� ���, MS ��������� COM1��\n"
-"������������ ttyS0�� �����˴ϴ�."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO(������ �δ�)�� GRUB�� ��Ʈ �δ��Դϴ�: �̰͵��� �ý��ۻ���\n"
-"GBU/������ �Ǵ� �ٸ� �ü���� ���ý�Ű�µ� ���˴ϴ�.\n"
-"�Ϲ�������, �������� �ƴ� �ٸ� �ü���� �ڵ����� �����Ǿ�\n"
-"�����˴ϴ�. �׷��� ���� �׷��� ���� ���, ���⼭ ���� �׸���\n"
-"�߰��� �� �ֽ��ϴ�. ��Ȯ�� ���ڰ��� �����ϵ��� �����ϼ���.\n"
-"\n"
-"���� �ٸ� ����� Ư�� �ü���� �����ϴ� ���� ���� ���� ����\n"
-"���� ���Դϴ�. �׷� ���, �ش� �׸��� ���켼��. �׷��� �׷����ϸ�,\n"
-"�� �ü���� �����ϱ� ���ؼ��� ���� ��ũ�� �־�� �մϴ�!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"GNU/�������� �����ϴµ� �ʿ��� ������  ��� ��ġ��ų ������\n"
-"������ �ּ���.\n"
-"\n"
-"���� ������ ���� �ִ��� ���� �𸣰ڴٸ�,\n"
-"����ũ�� ù ����(MBR)���� �����ϼ���."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"�巹��ũX�� �ý��ۻ� �ִ� ��� �ϵ� ��ũ�� �˻��ϰ�\n"
-"���� PCI SCSI ����� Ž���� �õ��� ���Դϴ�.\n"
-"���� �巹��ũX�� ��ġ�� �߰��ϰ� �Ǹ� �ڵ�����\n"
-"�ùٸ� ����̹��� ��ġ�� ���Դϴ�.\n"
-"\n"
-"�巹��ũX�� ��ġ �˻��� �����ϴ���, �Բ� SCSI ��ġ�� ������ �����ϰ� �˴�"
-"��.\n"
-"��Ͽ��� ��ġ�� ���� �����Ϸ��� ��������, SCSI ��ġ�� ���ٸ� ���ƴϿ����� ��"
-"���ϼ���.\n"
-"�� �𸣰ڴٸ�, ���ϵ���� ���� ���⡹�� ������ �� ��Ȯ�Ρ��� ������\n"
-"�ý��ۻ� �����ϴ� �ϵ������� ���캼 ���� �ֽ��ϴ�.\n"
-"�ϵ��� ���� ���䰡 ������ �ٽ� ��Ȯ�Ρ���ư�� ������ SCSI �������̽� ��"
-"�� ȭ��\n"
-"���� ���� �� �� �ֽ��ϴ�.\n"
-"\n"
-"���� ����͸� �����ؾ� �� ������, �巹��ũX�� �ɼ��� ������ �������� ����\n"
-"�� ���Դϴ�. �� ���� �巹��ũX�� �ʿ��� �ɼ��� Ž���ϵ��� �ϴ� ���� ������"
-"��.\n"
-"�Ϲ������� �� ����� �� �۵��մϴ�.\n"
-"\n"
-"\n"
-"���� �׷��� �ʴٸ�, ���� ����̹� �ɼ��� �����ؾ� �մϴ�. ����� ������(3"
-"��, \n"
-"���ϵ��� ���� ��������������)�� �����Ͽ�, �ϵ���� ������, \n"
-"(���ͳݿ� ������ �� �ִٸ�) ������ü �� ����Ʈ, \n"
-"�Ǵ� (������� ��ġ�Ǿ� �ִٸ�) MS ��������� ��� ���⿡ �ʿ��� \n"
-"������ �˾� �� �� �ִ��� ã�� ������."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-#, fuzzy
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"���� �ý��ۿ� ���� �پ��� ���ڵ��� ���̰� �ֽ��ϴ�. ��ġ�� �ϵ���� ����\n"
-"�Ʒ��� �����Ǵ� �׸�� �� �Ϻδ� ������ ���� �� �ֽ��ϴ�:\n"
-"\n"
-"  �� �����콺��: ���� ���콺 ������ Ȯ���ϰ�, �ʿ��ϴٸ� Ŭ���Ͽ�\n"
-"���콺�� �����ϼ���.\n"
-"\n"
-"  �� ��Ű���塹: ���� Ű���� ���� Ȯ���ϰ�, �ʿ��ϴٸ� Ŭ���Ͽ�\n"
-"Ű���带 �����ϼ���.\n"
-"\n"
-"  �� �������ð��롹: �巹��ũX�� ���� ������ �� ���� �ڵ�����\n"
-"�����ð��븦 �����մϴ�. �׷���, Ű���嵵 �׷�������, ���� ���� ���õ�\n"
-"���� ��ġ�ϴ� ������ �����ϰ� ���� ���� ���� �ֽ��ϴ�.\n"
-"�׷��ϴٸ�, �������ð��롹�� Ŭ���Ͽ�, ���� ���� �����ϰ� �ִ�\n"
-"������ �ð��뿡 �°� �ð��� �����ϼ���.\n"
-"\n"
-"  �� �������͡�: �������� �������� ������, ������ ���� �����簡\n"
-"���۵� ���Դϴ�.\n"
-"\n"
-"  �� ������ ī�塹: ���� ���� ī�尡 �����Ǿ��ٸ�, ���⿡ ��Ÿ��\n"
-"���Դϴ�. ��ġ �߿� �����ϴ� ���� �Ұ����մϴ�.\n"
-"\n"
-"  �� ��TV ī�塹: ���� TV ī�尡 �����Ǿ��ٸ�, ���⿡ ��Ÿ�� ���Դϴ�.\n"
-"��ġ �߿� �����ϴ� ���� �Ұ����մϴ�.\n"
-"\n"
-"  �� ��ISDN ī�塹: ���� ISDN ī�尡 �����Ǿ��ٸ�, ���⿡ ��Ÿ��\n"
-"���Դϴ�. ��ư�� Ŭ���Ͽ� ���� ������ ������ ����\n"
-"�ֽ��ϴ�."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"�ǵ巹��ũ ������ ��Ƽ���� ����� ���ؼ� ������ �ϵ��Ŭ�� �����ϼ���.\n"
-"����:\n"
-"��ũ���� ��� �����ʹ� �սǵǸ�, ������ ������ �Ұ����� ���ϴ�!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"�� �ϵ��ũ���� ��� �����Ϳ� ��Ƽ���� �����Ϸ���, ��Ȯ�Ρ��� ��������.\n"
-"!!�����ϼ���!!�ϴ� ��Ȯ�Ρ��� ������ �Ǹ�, MS �������� �����и� �����Ͽ� �� "
-"��Ʈ���� ���\n"
-"�����Ϳ� ��Ƽ���� ������ �Ұ����� ���ϴ�.\n"
-"\n"
-"�� �۾��� ����Ϸ���, ���� ����ҡ��� ��������. ��� �����Ϳ� ��Ƽ�ǵ�\n"
-"�ջ���� ���� ���Դϴ�."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"������ ���� �������� ���õǾ����ϴ�: %s\n"
-"\n"
-"\n"
-"�� �������� �⺻������ Ȱ��ȭ�˴ϴ�. ��� �������� �˷��� ���� ������ ����"
-"��,\n"
-"���ο� �������� �߰ߵ� ���� �ֽ��ϴ�. �׷� ��쿡�� ������ �� �ż��ϰ�\n"
-"���׷��̵��ؾ� �մϴ�.\n"
-"\n"
-"\n"
-"������ �� �������� ��ġ�մϱ�?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NIS ������ ���̴� ��ε��ɽ�Ʈ�� ����� �� �����ϴ�."
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "�÷��� ��ũ�� %s ����̺꿡 ��������"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "�� �÷��� ��ũ�� FAT ������ �ƴմϴ�."
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"�� ����� ��Ű�� ���ø���� ����ҷ���, ``linux defcfg=floppy''��� �Է��Ͽ� "
-"��ġ�� �����ϼ���."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "%s ������ �д��� ������ �߻��߽��ϴ�."
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"������롹����̹��� �ʿ���ϴ� �Ϻ� �ϵ��� �ý��ۻ� �ֽ��ϴ�.\n"
-"�ڼ��� ������ ������ �����ϼ���: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"��Ʈ ��Ƽ���� �ݵ�� �ʿ��մϴ�.\n"
-"�̸� ���ؼ�, ��Ƽ���� �����ϼ���. (�̹� �ִ� ��Ƽ���� Ŭ���ϰų�).\n"
-"�׸��� ����, ``����Ʈ ��ġ''�� Ŭ������ '/'���� �����ϼ���."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "���� ��Ƽ���� �ݵ�� �ʿ��մϴ�."
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"���� ��Ƽ���� �����ϴ�.\n"
-"\n"
-"��� �����մϱ�?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "��/boot/efi���� ����Ʈ�� FAT ��Ƽ���� �־�߸� �մϴ�."
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "�� ���� ���"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "���ο� ��Ƽ���� ���� �� �ִ� ������ �����մϴ�."
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "������ ��Ƽ�� ���"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "����� ������ ��Ƽ���� �����ϴ�."
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "�������� ��Ƽ���� ���������� ���"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "��� ��Ƽ���� Linux4Win������ ����ϰڽ��ϱ�?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "ũ�� ����"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "��Ʈ ��Ƽ�� ũ��(MB): "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "���� ��Ƽ�� ũ��(MB): "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "�������� ��Ƽ���� �� ���� ����ϼ���."
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "� ��Ƽ���� ũ�⸦ �����Ͻðڽ��ϱ�?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "�������� ���� �ý����� ���� �����"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT ũ�� �����Ⱑ ���� ��Ƽ���� ó���� �� �����ϴ�.\n"
-"������ ������ �߻��߽��ϴ�: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"�������� ��Ƽ���� ���ϰ� ������ �ֽ��ϴ�. ���� ``��ũ ���� ����''�� �ϼ���."
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"���!\n"
-"\n"
-"�巹��ũX�� ���� �������� ��Ƽ���� ũ�⸦ ������ ���Դϴ�. �� �۵��� \n"
-"�����մϴ�. ���� �������� �ʾҴٸ�, ��ġ�� �ߴ��ϰ� ���������\n"
-"��ũ�˻硹(�����ϴٸ� ���� ����ũ ����������)�� ������ �Ŀ�,\n"
-"��ġ�� �ٽ� �����ϼ���. ���� �����͵� ����� �μ���.\n"
-"�غ������, ��Ȯ�Ρ��� ��������."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "������������� ��� �뷮�� �����Ͻðڽ��ϱ�?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "��Ƽ�� %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FATũ������ ����: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"loopback�� ����ϰų� ũ�⸦ ������ FAT ��Ƽ���� �����ϴ�. (�Ǵ� ��ũ ����"
-"�� �����մϴ�.)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "��ü ��ũ ����"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "��������(TM) ����"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"�ϵ� ����̺갡 �ϳ� �̻� �ֽ��ϴ�. ��� �Ϳ� �������� ��ġ�Ͻðڽ��ϱ�?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "%s ����̺� ���� ��� ���� ��Ƽ�ǰ� �����Ͱ� �սǵ� ���Դϴ�."
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "����� ���� ��Ƽ�� ������"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "fdisk ���"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"���� %s�� ��Ƽ�� �۾��� �� �� �ֽ��ϴ�.\n"
-"��ģ ��, 'w'�� ���� �����ϴ°��� ����������."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "�������� ��Ƽ�ǿ� ����� ������ �����ϴ�."
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "��ġ�� �ʿ��� ������ ã�� �� �����ϴ�."
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "�巹��ũX ��Ƽ�� �����簡 ������ �ַ���� �߰��߽��ϴ�:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "��Ƽ�� ������ ����: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "��Ʈ�� Ȱ��ȭ ��..."
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "��Ʈ�� ���� ��..."
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"������ �߻��߽��ϴ�. �׷��� ������ ó���� �� �����ϴ�.\n"
-"������ �����ҷ��� ����ϼ���."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "����Ʈ ����Ʈ �ߺ� %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"�Ϻ� �߿��� ��Ű������ �ùٸ��� ��ġ���� �ʾҽ��ϴ�.\n"
-"CDROM ����̺� �Ǵ� �̵� �ջ�Ǿ����ϴ�.\n"
-"�̹� ��ġ�� �Ϸ�� ��ǻ�Ϳ��� ��rpm -qpl Mandrake/RPMS/*.rpm���������� ����"
-"�� ������.\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "%s�� ���Ű��� ȯ���մϴ�."
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "�÷��� ����̺긦 ����� �� �����ϴ�."
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "%s �ܰ�� �Ѿ�ϴ�.\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"�ý����� �ڿ��� �����մϴ�. ������ �ǵ巹��ũ�� ��ġ�ϴµ� �Ϻ� ������ �߻�"
-"��\n"
-"���� �ֽ��ϴ�. ���� ������ �߻��ϸ�, �ý�Ʈ ���� ��ġ�� �õ��� ������.\n"
-"�ؽ�Ʈ ���� ��ġ�Ϸ���, CDROM���� ������ ��F1���� ������ ��text����� �Է�"
-"�ϼ���."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "��ġ ����"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "���� ��ġ ������ �ϳ��� ������ �ּ���."
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "������ ��Ű�� �׷��� ��ü ũ�Ⱑ %d MB�� �������ϴ�.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"�� �뷮���� ���� ��ġ�ϰ� �ʹٸ�,\n"
-"��ġ�ϰ��� �ϴ� ��Ű������ ������� �����ϼ���.\n"
-"\n"
-"������� ������, ���� �߿��� ��Ű���鸸 ��ġ�˴ϴ�;\n"
-"����� 100%%�� ���õ� ��� ��Ű������ ��ġ�մϴ�."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"���õ� ��Ű������ %d%%�� �ش��ϴ� ��ũ ������ ���� �ֽ��ϴ�.\n"
-"\n"
-"�� �뷮���� ���� ��ġ�ϰ� �ʹٸ�,\n"
-"��ġ�ϰ��� �ϴ� ��Ű������ ������� �����ϼ���.\n"
-"������� ������, ���� �߿��� ��Ű���鸸 ��ġ�˴ϴ�;\n"
-"����� %d%%�� ������ ��� ��Ű������ ��ġ�մϴ�."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "���� �ܰ迡�� �߰��� �ڼ��� ������ �� �ֽ��ϴ�."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "��ġ�� ��Ű���� �����"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "��Ű�� �׷� ����"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "���� ���� ����"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "��ü ũ��: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "�߸��� ��Ű��"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "�̸�: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "����: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "ũ��: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "�߿伺: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "��ũ ������ �����ϱ� ������ �� ��Ű���� ������ �� �����ϴ�."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "���� ��Ű������ ��ġ�� ���Դϴ�."
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "���� ��Ű������ ���ŵ� ���Դϴ�."
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "�� ��Ű���� ����/���� �Ҽ� �����ϴ�."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "�̰��� �ʼ����� ��Ű���Դϴ�. �ݵ�� ���õǾ�� �մϴ�."
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "�� ��Ű���� ���������� �� �����ϴ�. �̹� ��ġ �Ǿ����ϴ�."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"�� ��Ű���� �ݵ�� ���׷��̵�Ǿ�� �մϴ�.\n"
-"������ ������ �����Ͻðڽ��ϱ�?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "�� ��Ű���� ���������Ҽ� �����ϴ�. �ݵ�� ���׷��̵�Ǿ�� �մϴ�."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "�ڵ����� ���õ� ��Ű���� ���̱�"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "��ġ"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "�÷��ǿ� ����/����"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "���õ� ��Ű�� ��� ������Ʈ ��"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "�ּ� ��ġ"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "��ġ�ϰ��� �ϴ� ��Ű���� �����ϼ���."
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "��ġ��"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "��� ��"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "���� �ð� "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "��ġ �غ����Դϴ�. ��� ��ٸ�����."
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ����"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "%s ��Ű�� ��ġ��"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "����"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "�ź�"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"CDROM�� �ٲ� �ּ���!\n"
-"\n"
-"��%s����� ������ CDROM�� ����̺꿡 ���� ��, ��Ȯ�Ρ��� ���� �ּ���.\n"
-"���� CDROM�� ������ ���� �ʴٸ�, ����ҡ��� ���� �߰� ��ġ�� ����ϼ���."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "��� �����մϱ�?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "��Ű���� �����ϴ� �� �����߻�:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "���� ��Ű���� ��ġ�� ������ �߻��߽��ϴ�: "
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "���� �߻�"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "������ ��%s�������͸� �����մϱ�?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "��� ���Ǽ�"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "����"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Ű���� ���̾ƿ� ����"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "�����Ǵ� Ű���� ����� ���⿡ �ֽ��ϴ�."
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "��ġ ������ ������ �ּ���."
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "��ġ/������Ʈ"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "��ġ�մϱ� �ƴϸ� ������Ʈ �մϱ�?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "����"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "������"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "������Ʈ"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "���õ� ��Ű�� ��� ������Ʈ ��"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "� ������ ���콺�� ����Ͻʴϱ�?"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "���콺 ��Ʈ"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "� �ø��� ��Ʈ�� ���콺�� ����Ǿ� �ֳ���?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "��ư ���ķ��̼�"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "��ư 2 ���ķ��̼�"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "��ư 3 ���ķ��̼�"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIS ī�� ȯ�漳����..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE ������"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "��밡���� ��Ƽ���� �����ϴ�."
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "����Ʈ ��ġ�� ã������ ��Ƽ�ǵ��� �˻� ��"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "����Ʈ ��ġ�� ������ �ּ���."
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"�ϵ� ��ũ�� ��Ƽ�� ���̺��� ������ �����ϴ�. �ʹ� �ջ�Ǿ� �ֽ��ϴ�:(\n"
-"�����ִ� ��Ƽ���� �������� �õ��� �� �� �ֽ��ϴ�.(��� �����Ͱ� �սǵ˴�"
-"��!)\n"
-"�ٸ� �ذ�å�� DrakX�� ��Ƽ�� ���̺��� �������� ���ϰ� �ϴ� ���Դϴ�.\n"
-"(������ %s �Դϴ�.)\n"
-"\n"
-"��Ƽ�ǵ��� �Ҿ �����ϱ�?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"��ũ�巹ũ�� ��Ƽ�� ���̺��� ��Ȯ�� �о���µ� �����߽��ϴ�.\n"
-"������ ������ �غ� �� ��쿡�� ����ϼ���!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"1MB ��Ʈ��Ʈ�� ���� ����! ��ġ�� ����� �� ������, �ý����� �����ϱ� ���ؼ�"
-"�� ��ũ�巹��ũ���� ��Ʈ��Ʈ�� ��Ƽ���� ������ �մϴ�."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "���׷��̵��� ��Ʈ ��Ƽ���� ã�� �� �����ϴ�."
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "��Ʈ ��Ƽ��"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "�ý��ۿ��� ��Ʈ ��Ƽ��(/)�� ����Դϱ�?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "��Ƽ�� ���̺� ��������� �����Ϸ��� �������� �ؾ� �մϴ�."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "������ ��Ƽ���� �����ϼ���"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "��� ���� �˻縦 �մϱ�?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "��Ƽ�� ����"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s ���ϸ� �����ϰ� ����"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "���� �޸𸮰� �����մϴ�. �� �� �߰��ϼ���."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "��ȿ�� ��Ű���� ã�� �ֽ��ϴ�."
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "���׷��̵��� ��Ű���� �˻����Դϴ�."
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "��ġ �Ǵ� ���׷��̵带 ���� ��ũ ������ �����մϴ�. (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "��ü (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "�ּ� (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "���� (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"�÷��ǿ� ��Ű�� ���ø���� ���� �Ǵ� ���������� �����ϼ���.\n"
-"����(����)�� �ڵ���ġ ���� �÷��ǿ� �����մϴ�."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "�÷��ǿ��� �б�"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "�÷��ǿ��� �д� ��"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "���� ����"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "��Ű�� ���ø�� �÷��� ��ũ�� ��������."
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "�÷��ǿ� ����"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "���õ� �뷮�� ����� �� �ִ� �������� Ů�ϴ�."
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"���� �Ʒ��� ���ŵ� ��� CD�� ������ �ִٸ�, ��Ȯ�Ρ���, \n"
-"���� ������ ���� �ʴٸ�, ����ҡ���, \n"
-"�Ϻθ� ������ �ִٸ�, ���� CD�� ���������� �Ŀ� ��Ȯ�Ρ��� ��������."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "��%s����� ǥ�õ� CDROM"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "��ġ �غ����Դϴ�"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-" %s ��Ű�� ��ġ ��... \n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "��ġ�� ȯ�漳��"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "���� �÷��Ǹ� %s ����̺꿡 ��������"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "������Ʈ ��� �÷��Ǹ� %s ����̺꿡 ��������"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "��밡���� ��Ű���� ����Ʈ�� �̷� ����Ʈ�� �����ؼ� �޽��ϴ�."
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "��Ű���� ���� �̷� ����Ʈ�� ������ �ּ���."
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "��밡���� ��Ű���� ����Ʈ�� �̷� ����Ʈ�� �����ؼ� �޽��ϴ�."
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "���� �ð���� ����Դϱ�?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "�ϵ���� �ð� GMT ����"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "�ڵ� �ð� ����ȭ (NTP ���)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP ����"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "���� CUPS ����"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "������ ����"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "�� �ٸ����� ��ġ�Ǿ� �ֽ��ϱ�?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "��༳��"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "���콺"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "��"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "������"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN ī��"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "���� ī��"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV ī��"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "���� ���ϵ�"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "root ��ȣ ����"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "��ȣ ����"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "�� ��ȣ�� �ʹ� �ܼ��մϴ�.( ��� %d ���ڴ� �Ѿ�� �մϴ�)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "����� ����"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "���� LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP ��� DN"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP ����"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "���� NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS ������"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS ����"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "ù��° �÷��� ����̺�"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "�ι�° �÷��� ����̺�"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "�dzʶٱ�"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"��Ʈ ��ũ�� �Ϲ����� ��Ʈ�δ��� ������� �ʰ�, ������ �ý������� �����ϴ�\n"
-"����� �����մϴ�. ���� LILO(�Ǵ� Grub)�� ������� �ʰų�, �ٸ� �ü����\n"
-"LILO�� �����ϰų� �Ǵ� LILO�� �ϵ���� ������ ���� ���� ��, �����մϴ�.\n"
-"��Ʈ ��ũ�� ���� �ǵ巹��ũ ���� �̹����� �Բ� ���Ǿ� �ɰ���\n"
-"�ý��� ������ ���� ������ �� �ֽ��ϴ�. ���� �ý����� ���� ��Ʈ ��ũ��\n"
-"����ðڽ��ϱ�?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "�˼��մϴ�. ��밡���� �÷��� ����̺갡 �����ϴ�."
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "��Ʈ ��ũ�� ���鶧 ����� �÷��� ����̺긦 ������ �ּ���"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "�÷��� ��ũ�� %s ����̺꿡 ��������"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "��Ʈ ��ũ ������"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "��Ʈ �δ� �غ���"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "aboot�� ����Ͻðڽ��ϱ�?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"aboot ��ġ ����. \n"
-"ù��° ��Ƽ���� �Ѽ������� ���� ��ġ�ұ��?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "��Ʈ�δ� ��ġ ��"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "��Ʈ�δ� ��ġ�� �����߽��ϴ�. ������ ���� ������ �߻��߽��ϴ�:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"��Ʈ�δ��� ����� �۵��ϱ� ���ؼ��� ���� �߿��� ��Ʈ ��ġ�� ������ �ʿ伺��\n"
-"���� ���� �ֽ��ϴ�. ���� ������Ŀ� ��Ʈ�δ� ������Ʈ�� ��Ÿ���� �ʴ´ٸ�,\n"
-"����ýÿ� ����-�ɼ�-O-F�� ��� ������ �ִٰ� ������ ���� �Է��ϼ���:\n"
-"setenv boot-device %s,\\\\:tbxi\n"
-"shut-down\n"
-"�׷������� �������ʹ� ��Ʈ�δ� ������Ʈ�� �� �� ���� ���Դϴ�."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "%s ����̺꿡 �� �÷��� ��ũ�� ��������"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "�ڵ� ��ġ �÷��� ��ũ ���� ��"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"��� �ܰ谡 ������ ������ �ʾҽ��ϴ�.\n"
-"\n"
-"���� ���� ���� �Ͻðڽ��ϱ�?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"�����մϴ�. ��ġ�� ���������� �������ϴ�.\n"
-"��Ʈ �̵� �����ϰ� ������ ������ ������ �ϼ���.\n"
-"\n"
-"\n"
-"�� ������ �ǵ巹��ũ �������� ���׼��� ������ http://www.linux-mandrake.com/"
-"en/82errata.php3\n"
-"���� ������ �� �ֽ��ϴ�.\n"
-"\n"
-"\n"
-"��ġ�� �ý��� ������ ���� ������ ���� �ǵ巹��ũ ������ ���� ���̵带\n"
-"�����Ͻñ� �ٶ��ϴ�."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "�ڵ� ��ġ �÷��� ��ũ ����"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"�ڵ� ��ġ�� ���Ѵٸ� �Ϻ��� �ڵ�ȭ�� �����մϴ�.\n"
-"�̷� ���, �ϵ� ����̺긦 ������ �����ϴ�!\n"
-"(�̰��� �� �ٸ� ��ǻ�Ϳ� �����ϰ� ��ġ�� ���� ���� ���Դϴ�.)\n"
-"\n"
-"�Ϲ������� ���� ��ġ�ϴ� ���� �����ϴ�.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "�ڵ�"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "��õ�"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "���õ� ��Ű�� ��� ����"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "������-�ǵ巹��ũ ��ġ %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> �׸� �̵�        |  <Space> ����      |  <F12> ���� ȭ��"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu�� ����"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "���� ����"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "����"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "��ٷ� �ּ���"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "����"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Ʈ�� Ȯ��"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Ʈ�� ����"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "�׷캰/��Ű���� ���� ��ȯ"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "�߸��� �����Դϴ�, �ٽ� �ϼ���\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "���� ������? (�⺻�� %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "���� ������? (�⺻�� %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "�ɼǵ�: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "aboot�� ����Ͻðڽ��ϱ�?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "���� ������? (�⺻�� %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "ü�� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "����"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "�庸��"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "�ɶ���"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "�븣����"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "���þ�"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "����"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "�̱�"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "�˹ٴϾ�"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "�̱� (������)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "�̱� (Ÿ�ڱ�)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "�̱� (������)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (��ƾ)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "���⿡"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "�̱� (������)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "�Ұ�����"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "����� (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "�����þ�"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "������ (����)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "������ (�Ҿ�)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "ü�� (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "���� (dead Ű ����)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "����ũ"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "�庸��(US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "�庸��(�븣����)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "�庸��(US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "������Ͼ�"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "�׷�����(���þƾ�)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "�׷����� (��ƾ)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "�׸���"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "�밡��"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "ũ�ξ�Ƽ��"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "�̽���"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "�̽��� (������)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "�̶�"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "���̽�����"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "��Ż����"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "�Ϻ� 106Ű"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "�ѱ� Ű����"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "��ƾ �Ƹ޸�ī"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "�����ƴϾ� AZERTY (����)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "�����ƴϾ� AZERTY (����)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "�����ƴϾ� (���ڿ� QWERTY)"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "�����ƴϾ� (������ QWERTY)"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "��Ʈ�پ�"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "���ɵ��Ͼ�"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "�׵�����"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "������ (QwertY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "������ (QwertZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "������Į"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "ij���� (����)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "�θ� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "�θ� (QWERTY)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "���þ� (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "���κ��Ͼ�"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "���ι�Ű�� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "���ι�Ű�� (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "������� (�ø�)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "���̺�"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "�±�"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Ÿ��ũ Ű����"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "�ͱ� (���� ��F����"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "��Ű (���� ��Q����"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "��ũ���̳�"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US ���� (����)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "��Ʈ�� (���ڿ� QWERTY)"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "���������� (��ƾ)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "��ȯ ����Ʈ %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "���� ������ ���� ������ �ּ���.\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - ���콺"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "������ ���콺��/�۽�Ʈ���콺 (�ø���)"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "�Ϲ����� PS2 �� ���콺"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "ALPS �۶��̵�����Ʈ"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "�˽��� ��ŷ ���콺"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "���Ͼ �ݸ��콺"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "���Ͼ �ݽ�ũ��"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 ��ư"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "�Ϲ����� 2��ư ���콺"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "�Ϲ� ���콺"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "�� ���콺"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "�ø��� ���콺"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "�Ϲ����� 3��ư ���콺"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "����ũ�μ���Ʈ ���ڸ����콺"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "������ ���콺��"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "���콺 �ý���"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "������ CC �ø���"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "������ ���콺��+/�۽�Ʈ���콺+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM �ø���"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM ��ƮŸ����"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "������ ���콺 (�ø���, ������ C7 ����)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "�������콺"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 ��ư"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 ��ư"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "����"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "���콺 ����"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "���콺�� �׽�Ʈ�ϼ���."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "���콺�� Ȱ��ȭ�Ϸ���"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "���콺���� ������ ������."
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-"-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,-*-gulim-bold-r-"
-"normal--16-*-*-*-c-*-ksc5601.1987-0,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "����"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "���� ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- ����"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "�̰��� �½��ϱ�?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "���ͳݿ� ����"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"ADSL ������ �밳 PPPOE�� ����մϴ�. \n"
-"������, � ��쿡�� PPTP��, ���� �幰�Դ� DHCP�� ���˴ϴ�.\n"
-"�� �𸣰ڴٸ�, ��PPPOE ��롹�� �����ϼ���."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "��ī�� ���ǵ���ġ USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "DHCP ���"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "PPPOE ���"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "PPTP ���"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"� dhcp Ŭ���̾�Ʈ�� ����ϰڽ��ϱ�?\n"
-"dhcpcd�� �⺻���Դϴ�."
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"��� ��Ʈ�� ����͵� �������� �ʾҽ��ϴ�.\n"
-"���� ������ �� �� �����ϴ�."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "��Ʈ�� �������̽��� �����ϼ���."
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "� ����ͷ� ���ͳݿ� ������ ������ �����ϼ���."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "��Ʈ�� ī�带 ã���� �����ϴ�"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "��Ʈ�� ����"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"ȣ��Ʈ���� �˰� �ִٸ� �Է��ϼ���.\n"
-"�Ϻ� DHCP ������ ȣ��Ʈ���� �䱸�� �� �ֽ��ϴ�.\n"
-"ȣ��Ʈ���� �Ϻ��� �������̾�� �մϴ�.\n"
-"��)��mybox.mylab.myco.com��"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "ȣ��Ʈ��:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "��Ʈ�� ���� ������"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "���� ISDN ��"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "���� ISDN ī��"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "� ������ ISDN ������ ����մϱ�?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"� ISDN ���� ����� ��ȣ�Ͻʴϱ�?\n"
-"\n"
-"* ������ ������ ISDN4NET�� ����մϴ�. ���������� �ʺ��ڿ���\n"
-"  ��ư� ���� ǥ���� �ƴմϴ�.\n"
-"\n"
-"* ���ο� ������ ���� ���� ǥ����������, ������ ������ ���\n"
-"  �����մϴ�.\n"
-"\n"
-"��ISDN-LIGHT���� ��õ�մϴ�.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "���ο� ���� (ISDN-LIGHT)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "������ ���� (ISDN4NET)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN ����"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"�����ڸ� �����ϼ���.\n"
-"��Ͽ� ������, ����Ͽ� �������� �����ϼ���."
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "���� ��������"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "���� �������� (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "�ٸ� ������ ���� ��������"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"�ٸ� ������ ���� ��������\n"
-" Dä�� (leased lines) �ƴ�"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "� ���������� ����Ͻðڽ��ϱ�?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "� ������ ī�带 ������ �ֽ��ϱ�?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "�𸣰���"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"���� ISA ī�带 ������ �ִٸ�, ���� ȭ�鿡�� �������� ��Ȯ�ؾ� �մϴ�.\n"
-"\n"
-"���� PCMCIA ī�带 ������ �ִٸ�, IRQ�� IO ���� �˰� �־�� �մϴ�.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "����"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "���"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "��� ���� ���� ISDN ī���Դϱ�?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ISDN PCI ī�尡 �����Ǿ�����, �� ������ �� �� �����ϴ�. ���� ȭ�鿡�� PCI ī"
-"�带 ������ �ּ���."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ISDN PCI ī�� �˻� ����. ���� ȭ�鿡�� ���� ������ �ּ���."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "� �ø��� ��Ʈ�� ���콺�� ����Ǿ� �ֳ���?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "���̾�� �ɼ�"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "���� �̸�"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "��ȭ ��ȣ"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "��� ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "��ũ��Ʈ ���"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "�͹̳� ���"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "������ �̸�"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "ù��° DNS ���� (�ɼ�)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "�ι�° DNS ���� (�ɼ�)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"������ �����ϰų� �ٽ� ������ �� �ֽ��ϴ�."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"������ �ٽ� ������ �� �ֽ��ϴ�."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "���� ���ͳݿ� ����Ǿ� �ֽ��ϴ�."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"���ͳݿ� �����ϰų� ������ �缳���� �� �ֽ��ϴ�."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "���� ���ͳݿ� ����Ǿ� ���� �ʽ��ϴ�."
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "�����"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "���� ����..."
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "���� ��Ʈ�� ����"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "���ͳ� ���� & ����"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "���� ��%s�������� ������ ���Դϴ�."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"���� ��%s�������� ������ ���Դϴ�.\n"
-"\n"
-"\n"
-"�����Ϸ��� ��Ȯ�Ρ��� ��������."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "��Ʈ�� ȯ�� ����"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"���� ��Ʈ���� ����Ͽ� ��ġ�ϰ� �ִ� ���̹Ƿ�, ��Ʈ�� ������ �̹� �Ǿ� �ֽ���"
-"��.\n"
-"��Ȯ�Ρ��� ���� ���� ������ �����ϰų�, ����ҡ��� ���� ���ͳ�/��Ʈ�� ������ "
-"�ٽ� �����ϼ���.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"��Ʈ�� ���� �����翡 �� ���̽��ϴ�.\n"
-"\n"
-"���� ���ͳ�/��Ʈ�� ������ �����Ϸ� �մϴ�.\n"
-"�ڵ� �˻��� ����ϰ� ���� �ʴٸ�, üũ�ڽ��� �����ϼ���.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "������ ���������� �����ϼ���."
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "�ڵ��˻� ���"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "��ġ�� �˻��ϰ� �ֽ��ϴ�..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "�Ϲ� �� ����"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "%s ��Ʈ���� �߰�"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN ����"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s �߰�"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL ����"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "�������̽� %s�󿡼� �߰�"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "ij�̺� ����"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "ij�̺� ���� �߰�"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN ����"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "�̴��� ī�� �߰�"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "������ ������ �����ϼ���."
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"���ͳ� ���ӹ���� ������ �����߽��ϴ�.\n"
-"���ῡ ����� ����� �����ϼ���.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "���ͳ� ����"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "���ýÿ� �����ϵ��� �ϰڽ��ϱ�?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "��Ʈ�� ����"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "��Ʈ���� �ٽ� �����ؾ� �մϴ�."
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"��Ʈ���� �ٽ� �����ϴ� ���߿� ������ �߻��߽��ϴ�:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"�����մϴ�. ��Ʈ��/���ͳ� ������ �Ϸ�Ǿ����ϴ�.\n"
-"\n"
-"���� ������ �ý��ۿ� ����� ���Դϴ�.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"�Ϸ�� �Ŀ�, X�� �ٽ� �����Ͽ� ȣ��Ʈ�� ���濡 ����\n"
-"���� �߻��� ���Ͻñ� �ٶ��ϴ�."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"���: �� ��ġ�� �̹� ���ͳ� ��������� �����Ǿ� �ֽ��ϴ�.\n"
-"�׳� ���� ������ �����ϼ���.\n"
-"�Ʒ� �Է¶��� �����ϸ� ���� ������ ����� �˴ϴ�."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"�� �ý����� ���� IP ������ �Է��� �ּ���.\n"
-"������ �׸�����.������ ���е� ������ IP �ּҷ� �Է��ؾ� �մϴ�.\n"
-"(��, 1.2.3.4)"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "%s ��Ʈ�� ī�� ������"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (%s ����̹�)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP �ּ�"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "�ݸ���ũ"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(BOOTP/DHCP)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP �ڵ��Ҵ�"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP �ּҴ� 1.2.3.4�� ���� �����̾�� �մϴ�."
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"ȣ��Ʈ �̸��� �Է��� �ּ���.\n"
-"ȣ��Ʈ �̸��� ``mybox.mylab.myco.com''�� ���� ������ ȣ��Ʈ \n"
-"�̸��̾�� �մϴ�. \n"
-"����Ʈ ���̰� �ִٸ� �� IP �ּҵ� �Է��ؾ� �մϴ�."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS ����"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "����Ʈ���� ��ġ"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "������ ����"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "�� ������"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP ������"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "��Ʈ��ī�� ID ���� (��ž�� ������)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "������ �̸��� httP://... �̾�� �մϴ�."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "������ �̸��� ftp://... �̾�� �մϴ�."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "���ͳ� ����"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "���� ���ͳ� ������ �õ��� ���ðڽ��ϱ�?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "���� �׽�Ʈ ��..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "���� �ý����� ���ͳݿ� ����Ǿ����ϴ�."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "���Ȼ��� ������ ���� ������ ���� ���Դϴ�."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"�ý����� ���ͳݿ� ������� ���� ���մϴ�.\n"
-"���� ������ �ٽ��� ������."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "���� ����"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "�Ʒ� ����� ä�� �ּ���."
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "ī�� IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "ī�� �޸� (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "ī�� IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "ī�� IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "ī�� IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "���� ���� ��ȭ ��ȣ"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "������ �̸� (�� provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "������ ��ȭ��ȣ"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "������ DNS 1 (�ɼ�)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "������ DNS 2 (�ɼ�)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "���� ����"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "���̾� ���"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "���� �ӵ�"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "���� �ð��ʰ� (��)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "�α��� ����(����ڸ�)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "���� ��ȣ"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "����Ʈ ����: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "�� �ý��ۿ����� Ȯ����Ƽ���� �������� �ʽ��ϴ�."
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"��Ƽ�� ���̺����� �� ������ ������ ����� �� �����ϴ�.\n"
-"������ �ذ�å�� �� ��Ƽ�ǵ��� Ȯ�� ��Ƽ�ǵ��� �ڿ� �ִ� �� ������ �����ϵ��� "
-"�ȱ�� ���Դϴ�."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s ���Ϸκ����� ���� ����: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "�߸��� ��� ����"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "%s ���Ͽ� ���� ����"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"�ϵ�彺ũ�� �̻��� �߻��߽��ϴ�. \n"
-"������ ���Ἲ �˻簡 �����߽��ϴ�. \n"
-"�̰��� ��ũ�� ��ϵǴ� �����͸� �Ҿ� �����ٴ� ���� �ǹ��մϴ�."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "�ʼ� ��Ű��"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "�߿��� ��Ű��"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "�Ǹ��� ��Ű��"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "���� ����"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "������ ����"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "���� ������"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "���� ������"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "���� CUPS ������ ������"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "���� LPD ������ ������"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "��Ʈ�� ������ (����)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "���/�������� 95/98/NT���� ������"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "��Ʈ���� �������� ������"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "������ ��ġ URI�� �Է��ϼ���."
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "�۾��� �������� ������ ����"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "�� ������ ��"
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "���� ������"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "���� ������"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "%s ���Ͽ� ���� ����"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "��(RAW) ������ (����̹� ������)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(%s��)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(�� ��������)"
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS ���� IP"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (�⺻��)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "������ �������� �����ϼ���."
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "�����Ͱ� ��� ����Ǿ� �ֽ��ϱ�?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"���� CUPS ������ �����ʹ� ���⼭ ������ �ʿ䰡 \n"
-"�����ϴ�; �̷� �����ʹ� �ڵ����� �����Ǿ� ���ϴ�. �̿� ���� ���\n"
-"������ CUPS ������ �����͡��� �����ϼ���."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "����"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "���� CUPS ����"
-
-#: ../../printerdrake.pm_.c:71
-#, fuzzy
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"���� CUPS ������ ���ؼ��� ���⼭ �����͸� ������ �ʿ䰡\n"
-"�����ϴ�; CUPS ������ �ڵ����� ������ ������ �˷��ݴϴ�.\n"
-"���� �˷��� ��� �����ʹ� ���⺻ �����͡������� �����˴ϴ�.\n"
-"�⺻ �����ͷ� ����� �����͸� �����ϰ� ������/������ �ٽ� �б⡹\n"
-"��ư�� ��������. ������ ����� �����Ϸ� �Ҷ��� ������ ��ư��\n"
-"��������. (CUPS�� ���۵� ��, ��� ���� �����Ͱ� �������������\n"
-"30�� ������ �ð��� �ɸ��ϴ�.)\n"
-"CUPS ������ �ٸ� ��Ʈ���� �ִٸ�, CUPS ������ IP �ּҿ�\n"
-"��Ʈ ��ȣ(�ɼ�)�� �����ؾ߸� �����κ��� ������ ������ �޾ƿ� ��\n"
-"�ֽ��ϴ�. �̷� ��찡 �ƴ϶�� �� �������� �׳� ����μ���."
-
-#: ../../printerdrake.pm_.c:72
-#, fuzzy
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"�Ϲ������� CUPS�� ��Ʈ��ȯ�濡 ���� �ڵ����� �����DZ�\n"
-"������, ���� ��Ʈ���� �ִ� CUPS ������ �����͸� �����\n"
-"�� �ֽ��ϴ�. �׷��� ���࿡ �̰��� �ùٸ��� �۵����� ������,\n"
-"���ڵ� CUPS �������� �����Ͻð�, ��/etc/cups/cupsd.conf��\n"
-"�� ���� ������ �ּ���. ���߿� CUPS�� �ٽ� �����ϴ� ����\n"
-"����������. (���ɾ�: ��service cups restart�� )"
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP �ּҴ� ��192.168.1.20���� ���� �����̾�� �մϴ�."
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "��Ʈ ��ȣ�� �����̾�� �մϴ�!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS ���� IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "��Ʈ"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "�ڵ� CUPS ����"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "��ġ �˻� �� ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "��Ʈ �˻�"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "������ �߰�"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "���� ������"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "���� ������"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "�ڵ��˻� ���"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "���� �����͸�"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s �߰�"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "������ ��ġ URI�� �Է��ϼ���."
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "���� ������"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "� �ø��� ��Ʈ�� ���콺�� ����Ǿ� �ֳ���?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "������ ��ġ URI�� �Է��ϼ���."
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "���ͳ� ����"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "��Ű�� ��ġ ��..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "��Ű�� ��ġ ��..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "������ �����ͺ��̽� �д� �� ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "������ �����ͺ��̽� �д� �� ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "���� LPD ������ �ɼ�"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"���� LPD �����͸� ����ϱ� ���ؼ���\n"
-"�� ������ ������ ȣ��Ʈ���� �� �������� ������ �̸���\n"
-"�Է��ؾ� �մϴ�."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "���� ȣ��Ʈ��"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "���� �����͸�"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "���� ȣ��Ʈ���� ã�� �� ����!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "���� �����͸��� �������ϴ�!!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) ������ �ɼ�"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"��� �����ͷ� �μ��Ϸ���, ��� ������ ȣ��Ʈ�� \n"
-"(����! �� ������ TCP/IP ȣ��Ʈ������ �̸��� �ٸ� �� �ֽ��ϴ�.)��, \n"
-"�����ϴٸ�, �� ������ IP �ּ� �׸��� �׼����Ϸ��� �������� \n"
-"���� �̸�, ���� ����ڸ�, ��ȣ, �۾��׷���� \n"
-"�Է��ؾ� �մϴ�."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB ���� ȣ��Ʈ"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB ���� IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "���� �̸�"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "�۾� �׷�"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "���� �̸� �Ǵ� ���� IP�� �Է��ؾ� �մϴ�!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "��� ���� �̸��� ã�� �� ����!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "�ݿ��� ������ �ɼ�"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"�ݿ��� �����ͷ� �μ��Ϸ���, �ݿ��� ������ ȣ��Ʈ�� \n"
-"(����! �� ������ TCP/IP ȣ��Ʈ������ �̸��� �ٸ� �� �ֽ��ϴ�.)�� \n"
-"�׼����Ϸ��� �������� ť �̸�, ���� ����ڸ�, ��ȣ�� \n"
-"�Է��ؾ� �մϴ�."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "������ ����"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "����Ʈ ť �̸�"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP ���� �̸��� ã�� �� ����!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP ť �̸��� ã�� �� ����!"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "���� ������ �ɼ�"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"���� �����ͷ� �μ��ϱ� ���ؼ���, �������� ȣ��Ʈ���� \n"
-"��Ʈ ��ȣ(�ɼ�)�� �����ؾ� �մϴ�. HP JetDirect �����󿡼���\n"
-"�Ϲ������� 9100 ��Ʈ�� ���������, �ٸ� �����󿡼��� ����\n"
-"�ٸ� �� �ֽ��ϴ�. �ϵ���� �������� �����ϼ���."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "������ ȣ��Ʈ��"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "������ ȣ��Ʈ���� ã�� �� ����!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "������ ��ġ URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"������ �׼��� �ּҸ� ���� ������ �� �ֽ��ϴ�. �ּҴ� CUPS �Ǵ� Foomatic ����"
-"�� �ؼ��ؾ� �մϴ�. �׷��� ���� �ּҴ� ��� ��Ǯ���� �������� �ʽ��ϴ�."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "��ȿ�� �ּҸ� �Է��ϼ���!"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"��� �����ʹ� �̸��� �־�� �մϴ�.(��, lp)\n"
-"������ ��ġ �κ��� �Է��� �ʿ�� �����ϴ�.\n"
-"�װ͵��� ���� ����ڵ��� ���� �ο������� ���Դϴ�."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "������ �̸�"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "����"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "��ġ"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "������ �����ͺ��̽� �غ� �� ..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "���� �����͸�"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "�̰��� �½��ϱ�?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "���� �����͸�"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "������ �� ����"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "� �����͸� ������ �ֽ��ϱ�?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI �������� ����"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "������ũ ��ũ�� ����"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-#, fuzzy
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"������ �⺻�� ����\n"
-"������ ũ��� (���� ��ȿ�ϴٸ�) ��ũ ������ �ùٸ���\n"
-"�� Ȯ���ϼ���. ��ǰ�� �μ⹰�� ������ؼ��� �μ� �ӵ���\n"
-"�� ��ŭ �������ٴ� ���� �˰� �輼��."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "%s �ɼ��� ���� ��ȣ�̾�� �մϴ�!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "%s �ɼ��� �����̾�� �մϴ�!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "%s �ɼ� ���� �ʰ�!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"�� ������(%s)��\n"
-"�⺻ �����ͷ� �Ͻðڽ��ϱ�?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "���� ������"
-
-#: ../../printerdrake.pm_.c:1583
-#, fuzzy
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"�μ��� ���� �������� �����ϼ���.\n"
-"����: ���� ���� �������� �μ��ϱ� ���ؼ��� �ټ� �ð��� �ɸ� �� �ֽ��ϴ�.\n"
-"�׸��� ���뷮�� �޸𸮸� ���� ������ �����Ϳ�����\n"
-"�������� ������ ���� ���� �ֽ��ϴ�.\n"
-"ǥ�� ���� �������� �밳 �� �μ�˴ϴ�."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "���� ������ ����"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "�μ�"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "ǥ�� ���� ������"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "�ٸ� ���� ������ (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "���� ������ Ȱ��ȭ (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "���� ���� ������"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "���� ������ �μ�"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "���� ������ �μ� ��..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"���� �μ� �������� �����ͷ� ���½��ϴ�.\n"
-"�μ�DZ���� �ణ�� �ð��� �ɸ� �� �ֽ��ϴ�.\n"
-"�μ� ��Ȳ: \n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"���� �μ� �������� �����ͷ� ���½��ϴ�.\n"
-"�μ�DZ���� �ణ�� �ð��� �ɸ� �� �ֽ��ϴ�.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "�ùٸ��� �۵��߽��ϱ�?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "��(RAW) ������"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, fuzzy, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"���� �����Ϳ� ����� �� �ִ� �ɼ� ����� ������, ���μ� �ɼ� ��ϡ��� ������"
-"��.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"������(�͹̳� ������)���� ������ �μ��Ϸ���, ��%s <����>�������� ����ϼ�"
-"��.\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-#, fuzzy
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"���� �����Ϳ� ����� �� �ִ� �ɼ� ����� ������, ���μ� �ɼ� ��ϡ��� ������"
-"��.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"������(�͹̳� ������)���� ������ �μ��Ϸ���, ��%s <����>�� �Ǵ� ��%s <����>��"
-"������ ����ϼ���.\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"��%s���͡�%s�������� ���� Ư�� �μ� �۾��� ���� �ɼ� ������ ������ �� �ְ� ��"
-"�ϴ�. �����࿡ ���ϴ� �������� �߰��ϼ���, ��: ��%s <����>��.\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "�ݱ�"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "�����͡�%s���󿡼� �μ� ��"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "�����͡�%s���󿡼� �μ� ��"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "������ �ɼ� ���"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "������ ������ �д� �� ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "������ ���� ����"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"��Ǯ�� %s�� ���� ����� ������ ������ ���� ��Ǯ���� %s��\n"
-"������ �� �ֽ��ϴ�. ��� ���� ������(�����͸�, ����, ��ġ,\n"
-"���� ����, �׸��� �⺻ �ɼǰ���)�� �Ѱ��� ���Դϴ�.\n"
-"�׷��� �۾����� ���۵��� �ʽ��ϴ�.\n"
-"������ ���� ���������Ͽ� ��� ť�� ���۵� ���� �����ϴ�:\n"
-
-#: ../../printerdrake.pm_.c:1818
-#, fuzzy
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS�� �뺧 �������� �����ͳ� �������� ���ɾ�� �����͸� ������\n"
-"�����ʹ� �������� �ʽ��ϴ�.\n"
-
-#: ../../printerdrake.pm_.c:1820
-#, fuzzy
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"LPQ�� ���� ���� ������, ���� LPD ������ �׸��� ����/TCP\n"
-"�����͸��� �����մϴ�.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD�� LPRng�� IPP �����͸� �������� �ʽ��ϴ�.\n"
-
-#: ../../printerdrake.pm_.c:1824
-#, fuzzy
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"�׸��� ����, �� ���α׷��̳� ��Foomatic ����������\n"
-"�������� ���� ť�� ���۵� �� �����ϴ�."
-
-#: ../../printerdrake.pm_.c:1825
-#, fuzzy
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"���� ������ü�� ������ PPD �����̳� CUPS ���� ����̹���\n"
-"������ �����͵� ���۵� �� �����ϴ�."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"�����Ϸ��� �����͵��� ������ �Ŀ� �����ۡ��� ��������."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "������ ���� ��������"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "����"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"������ ��%s���� �̹� %s�Ͽ� �����Դϴ�.\n"
-"���� ������ �����ۡ��� ��������.\n"
-"�� �̸��� �Է��ϰų� �� �����͸� ����ĥ ���� �ֽ��ϴ�."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "������ �̸����� ����, ���� �׸��� ����(Underscore)�� �־�� �մϴ�."
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"������ ��%s���� �̹� �����մϴ�.\n"
-"������ ���� ������ ���� �����?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "�� ������ �̸�"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s ���� �� ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, fuzzy, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"���� �⺻ ������(��%s��)�� �����Ͽ����ϴ�.\n"
-"�� ������ �ý��� %s�Ͽ��� �װ��� ���� �⺻ �����Ͱ�\n"
-"�ǵ��� �Ͻðڽ��ϱ�?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "������ ������ ���� �� ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "���� ������ ����"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "��Ʈ�� ���� ��..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "���� ��Ʈ�� ����"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "��Ʈ�� ����� �������� �ʾҽ��ϴ�."
-
-#: ../../printerdrake.pm_.c:1932
-#, fuzzy
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"���� �����͸� �����Ϸ� �մϴ�. �׷��� ���ؼ��� ��Ʈ����\n"
-"�����ϰ� �־�� �ϴµ�, ���� ��Ʈ�� ������ �Ǿ� ���� �ʽ��ϴ�.\n"
-"��Ʈ�� �������� ��� �����ϸ�, ���� �����ϰ� �ִ� �����͸�\n"
-"����� �� �����ϴ�.\n"
-"��� �Ͻðڽ��ϱ�?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "��Ʈ�� ���� ���� ���"
-
-#: ../../printerdrake.pm_.c:1968
-#, fuzzy
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"��ġ�������� ������ ��Ʈ���� ������ �� �����ϴ�.\n"
-"�ý����� ���õ� ��, ��Ʈ���� �ڵ� ����ǵ��� �Ǿ� �ִ���\n"
-"Ȯ���ϰ�, �ǵ巹��ũ ���� ����(����Ʈ���� ���ͳݡ�->�����᡹)\n"
-"�� �̿��Ͽ� �ùٸ��� �����ϼ���.�׸������� �ٽ� �ǵ巹��ũ ���� ����(���ϵ��"
-"�->�������͡�)\n"
-"�� �̿��Ͽ�, ������ ������\n"
-"�ٽ� �� ������."
-
-#: ../../printerdrake.pm_.c:1969
-#, fuzzy
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"��Ʈ�� ������ �Ұ���������, ������ ���� �������ϴ�.\n"
-"��Ʈ�� ������ �ϵ��� ������ �ּ���.\n"
-"�׸������� ���� ������ ������ �ٽ� �õ���\n"
-"������."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "�μ� �ý��� ����� �� ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "����"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "�ְ�"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "���� ���� %s�� �μ� �ý��� ��ġ ��"
-
-# #msgid ""
-# #"You are about to install the printing system %s on a system running in the %"
-# #"s security level.\n"
-# #"\n"
-# #"This printing system runs a daemon (background process) which waits for "
-# #"print jobs and handles them. This daemon is also accessable by remote "
-# #"machines through the network and so it is a possible point for attacks. "
-# #"Therefore only a few selected daemons are started by default in this "
-# #"security level.\n"
-# #"\n"
-# #"Do you really want to configure printing on this machine?"
-# #msgstr ""
-# #"���� ���� ���ȼ��� %2%s�� ���Ǵ� �ý��ۿ�\n"
-# #"�μ� �ý��� %1$s�� ��ġ�Ϸ��� �մϴ�.\n"
-# #"\n"
-# #"�μ� �ý����� �μ��۾��� ��ٷȴٰ� ó���ϴ�\n"
-# #"���(��׶��� ���μ���)�� �����ŵ�ϴ�.\n"
-# #"���� �ý��ۿ��� ��Ʈ������ �� ��� ������ ����\n"
-# #"�ֱ� ������, ũ��Ŀ���� ��ɰ��� �DZ⵵ �մϴ�.\n"
-# #"���� ���� ���� ���ؿ����� ���� ����� �Ÿ�鸸\n"
-# #"����ǵ��� ���õǴ� ���� �⺻�Դϴ�.\n"
-# #"\n"
-# #"������ �� ��ǻ�ͻ��� �μ� ������\n"
-# #"���Ͻʴϱ�? "
-#: ../../printerdrake.pm_.c:2019
-#, fuzzy, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"���� ���� ���ȼ��� %2%s�� ���Ǵ� �ý��ۿ�\n"
-"�μ� �ý��� %1$s�� ��ġ�Ϸ��� �մϴ�.\n"
-"\n"
-"�μ� �ý����� �μ��۾��� ��ٷȴٰ� ó���ϴ�\n"
-"���(��׶��� ���μ���)�� �����ŵ�ϴ�.\n"
-"���� �ý��ۿ��� ��Ʈ������ �� ��� ������ ����\n"
-"�ֱ� ������, ũ��Ŀ���� ��ɰ��� �DZ⵵ �մϴ�.\n"
-"���� ���� ���� ���ؿ����� ���� ����� �Ÿ�鸸\n"
-"����ǵ��� ���õǴ� ���� �⺻�Դϴ�.\n"
-"\n"
-"������ �� ��ǻ�ͻ��� �μ� ������\n"
-"���Ͻʴϱ�? "
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "���ý� �μ� �ý��� �ڵ�����"
-
-#: ../../printerdrake.pm_.c:2052
-#, fuzzy, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"�μ� �ý���(%s)�� ��ǻ�Ͱ� ������ �� �ڵ����� �������\n"
-"���� ���Դϴ�.\n"
-"\n"
-"�μ� �ý����� ũ��Ŀ���� �������� ���ݸ�ǥ�̱� ������,\n"
-"���� ������ ���� �Ͽ��� �ÿ��� �ڵ����� ����� ������\n"
-"���� �ֵ��� �Ǿ� �ֽ��ϴ�.\n"
-"\n"
-"�ٽ� �μ� �ý����� �ڵ����� ����� Ȱ��ȭ�ǵ���\n"
-"�Ͻðڽ��ϱ�?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "��ġ�� ����Ʈ���� Ȯ�� �� ..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "LPRng ���� �� ..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "LPD ���� �� ..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "������ ��Ǯ���� �����ϼ���."
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "� �μ� �ý���(��Ǯ��)�� ����Ͻðڽ��ϱ�?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "������ ��%s�� ���� �� ..."
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "��Ű�� ��ġ ��..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "������ �ɼ�"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "�����͵巹��ũ �غ� �� ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "������ ��%s�� ���� �� ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "�μ� ������ �Ͻðڽ��ϱ�?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "�μ� �ý���:"
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "������"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"���� �����͵��� �����Ǿ����ϴ�.\n"
-"�����ϰ� �Ͱų�,\n"
-"������ ���� �ʹٸ� �����͸� Ŭ���ϼ���.\n"
-"�� �����͸� �߰��ϰ� �ʹٸ� �������� �߰����� ��������."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"���� �����͵��� �����Ǿ����ϴ�.\n"
-"�����ϰ� �Ͱų�,\n"
-"������ ���� �ʹٸ� �����͸� Ŭ���ϼ���.\n"
-"�� �����͸� �߰��ϰ� �ʹٸ� �������� �߰����� ��������."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "��Ʈ�� ����"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "�Ϲ� ���"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "�Ǵٸ� �����͸� �����Ͻðڽ��ϱ�?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "���ͳ� ���� ����"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"������ %s: %s: %s\n"
-"�� �����Ϳ� ���ؼ� ������ �����Ͻðڽ��ϱ�?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "����"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "���ͳ� ���� ����"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "������ �̸�, ����, ��ġ"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "������ ������ü, ��, ����̹�"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "������ ������ü, ��"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "�� �����͸� �⺻���� ����"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "���� ������ �μ�"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "�� �������� �μ�� �˱�"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "������ ����"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "���� ������ ��%s�� ���� �� ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "�⺻ ������"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "��%s�������Ͱ� �⺻ �����ͷ� �����Ǿ����ϴ�."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "������ ��%s�������͸� �����մϱ�?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "������ ��%s�� ���� �� ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "������ ����"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"������ ���� ������ �� ���̽��ϴ�.\n"
-"\n"
-"���⼭ �α��ΰ� ��й�ȣ�� �ʿ� �Ǵ� �ʿ������ �ʴ�\n"
-"HTTP�� FTP �����ø� ������ �� �ֽ��ϴ�.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"HTTP ������ ������ �Է��ϼ���.\n"
-"HTTP �����ð� �ʿ� ���ٸ�, �������� �μ���."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "�ּ�"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "��Ʈ"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "�ּҴ� ��http:���� �����ؾ� �մϴ�."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "��Ʈ �κ��� �����̾�� �մϴ�."
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"FTP ������ ������ �Է��ϼ���.\n"
-"FTP �����ð� �ʿ���ٸ�, �������� �μ���."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "�ּҴ� ��ftp:���� �����ؾ� �մϴ�."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"������ �α��ΰ� ��й�ȣ�� �Է��ϼ���.\n"
-"�α��ΰ� ��й�ȣ�� �ʿ�ġ �ʴٸ�, �������� �μ���."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "���"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "��й�ȣ"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "��й�ȣ Ȯ��"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "��й�ȣ�� ��ġ���� �ʽ��ϴ�. �ٽ� �Է��ϼ���!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "���˵� RAID md%d�� ��Ƽ���� �߰��� �� �����ϴ�."
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "%s ���Ͽ� �� �� �����ϴ�."
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ����"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ���� (raidtool�� ��ġ�Ǿ� ���� ���� �� �ֽ��ϴ�.)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "RAID ���� %d�� ���� ��Ƽ�ǵ��� ������� �ʽ��ϴ�.\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA (������ ������ ���� ��Ű��ó) ���� �ý��� ����"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anancron�� �ֱ����� ���� �����췯 �Դϴ�."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd�� ���͸� ���¿� syslog�� ���ļ� �α� ����� �����ϴµ� ���˴ϴ�.\n"
-"���� ���͸����� �̾��Ҷ� �ڵ����� �ý����� �˴ٿ� �����ִ� ��ɵ� �մϴ�."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"������ �ð��� �ѹ��� �ϳ��� �����ŵ�ϴ�. at�� batch ���ɵ��� �ý���\n"
-"�ε����� ������ �����ŵ�ϴ�."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron�� ����ڰ� ������ ���α׷��� �ֱ������� Ư�� �ð��� �����Ű�� \n"
-"ǥ�� UNIX ���α׷��Դϴ�. vixie cron�� �� �⺻ UNIX Cron�� ���� ���Ȱ� \n"
-"�� ������ �����ɼ� ���� ���� Ư¡�� �߰��մϴ�."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM�� �ؽ�Ʈ ��� ���α׷��鿡�� ���콺 ����� �����մϴ�.\n"
-"���� �ܼ� ȭ�鿡�� �߶� ���̱�� �˾� �޴� ����� \n"
-"�����մϴ�."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"�ϵ�巹��ũ�� �ϵ���� �˻��� �����ϸ�, �ʿ��ϴٸ�\n"
-"��/����� �ϵ��� �����մϴ�."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"����ġ(Apache)�� �� �����Դϴ�. �̰��� HTML�̳� CGI ���� ���񽺸�\n"
-"�ϴµ� ���˴ϴ�."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"(��������� inetd��� �ϴ�) ���ͳ� ���� ����� �پ��� ���ͳ� ������\n"
-"�ʿ��� �� ���� ��ŵ�ϴ�. �ڳ�, FTP, RSH, RLOGIN ��� ���� ���� \n"
-"���񽺸� �����մϴ�. �̰��� ����Ǿ� ���� ������, ���� �̰��� �����ϴ�\n"
-"���� ���񽺵� ���� �Ұ����ϰ� �˴ϴ�."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"2.2 Ŀ�� �ø���� ��Ŷ ���͸� ����, ��Ʈ�� �������κ���\n"
-"��ǻ�͸� ��ȣ�ϴ� ��ȭ���� �����մϴ�."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"�� ��Ű���� ��/etc/sysconfig/keyboard���� �����Ǿ� �ִ� \n"
-"Ű���� ���� �����մϴ�. Ű����� ��kbdconfig���������� ������ �� �ֽ��ϴ�.\n"
-"��κ��� �ý��ۿ��� �ʿ��� ���Դϴ�."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"��/usr/include/linux/{autoconf,version}.h���� ����\n"
-"��/boot���� Ŀ�� ����� �ڵ� ����."
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "���ýÿ� �ڵ� �ϵ���� �˻� �� ����."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"������ ����(Linuxconf)�� �ý��� ������ �����ϱ� ���Ͽ�\n"
-"���ýÿ� �پ��� �۾� ������ �غ��մϴ�."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"LPD�� lpr ������ �ùٸ��� �۵��ϱ� ���� �ʿ��� �μ� ����Դϴ�.\n"
-"�ٺ������� �μ� �۾����� �����ͷ� ������ �ִ� �����Դϴ�."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"������ ���� ����, ������ ���� ���࿡\n"
-"���˴ϴ�."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"NAMED(BIND)�� ȣ��Ʈ �̸����� IP �ּҸ� ã�Ƴ��µ� ���Ǵ�\n"
-"������ ���� �����Դϴ�."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"��Ʈ�� ���� �ý���(NFS), ���(SMB/�� ������/��������), �׸���\n"
-"NCP(�ݿ���)�� ����Ʈ�ϰ� �𸶿�Ʈ�մϴ�."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"���ýÿ� �����ϵ��� ������ ��� ��Ʈ�� �������̽��� \n"
-"Ȱ��ȭ/��Ȱ��ȭ �մϴ�."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS�� TCP/IP ��Ʈ������ ������ �����ϴ� �α��ִ� ���������Դϴ�.\n"
-"�� ���񽺴� /etc/export ������ ���������ν� NFS ������ ����� �����ϰ�\n"
-"�մϴ�."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS�� TCP/IP ��Ʈ������ ������ �����ϴ� �α��ִ� ���������Դϴ�.\n"
-"�� ���񽺴� NFS ���� ��� ����� �����մϴ�."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"���ýÿ� �ڵ����� �ְܼ� X ȯ�濡��\n"
-"����Ű ��� ��� ���."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w �� ȣȯ ������ ����."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA�� ���� ��ž(��Ʈ��)�� �ִ� �̴��� ī��� �𵩰��� ��ġ\n"
-"���� �����ϱ� ���� ���Դϴ�. �߰� ������ ������ ���۵��� �ʱ� ������,\n"
-"�̷��� ��ġ�� ���� ��ǻ�Ϳ� ��ġ�Ǿ� �־ �����մϴ�."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"��Ʈ����(portmapper)�� NFS�� NIS ���� �������ݿ� ���� ���Ǵ�\n"
-"RPC ������ �����մϴ�. ��Ʈ�� ������ RPC ��Ŀ������ �̿��ϴ� �������ݿ� ����"
-"��\n"
-"���ǰ� �ִ� ��ǻ�Ϳ��� �ݵ�� ����ǰ� �־�� �մϴ�."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"����Ʈ�Ƚ�(Postfix)�� ��ǻ��鰣�� ������ �ְ��޴� \n"
-"���� ���� ������Ʈ�Դϴ�."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"��ǰ���� ���� ������ ���� �ý��� ��Ʈ���� Ǯ�� �����ϰ� \n"
-"�����մϴ�."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"����Ŭ ���� ���α׷��� ����ϱ� ���� ��(RAW) ��ġ��\n"
-"(�ϵ��ũ ��Ƽ�� ����) ���� ��ġ�� �Ҵ�."
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed ������ RIP ���������� ���� �ڵ����� IP ����� ���̺��� ���ŵǵ��� �մ�"
-"��.\n"
-"RIP�� �ұԸ� ��Ʈ���� ���� ���̱� ������, ��Ը� ��Ʈ���� ���ؼ��� ���� ����"
-"��\n"
-"����� ���������� �ʿ��մϴ�."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat ���������� ��Ʈ������ ����ڰ� �� ��Ʈ���� �ִ� \n"
-"��� ��ǻ�Ϳ� ���Ͽ� ����ɷ� ��Ʈ������ �˾� �� �� �ְ� �մϴ�."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers ���������� ��Ʈ������ ����ڵ��� �ٸ� ��ǻ�ͻ� �α����� \n"
-"����ڵ��� �ſ��� �� �� �ְ� �մϴ�."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho ���������� (finger�� ����ϰ�) rwho ����� ����ǰ�\n"
-"�ִ� ��ǻ�Ϳ� �α����� ����� ����� ���� ����ڰ� �� �� �ְ� �մϴ�."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "�� ��ǻ�Ϳ��� ���� �ý��� ����"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog�� ���� ������� �α� �޼����� ���� ������ �ý��� �α� ���Ϸ�\n"
-"����µ� �����մϴ�. �׻� Syslog�� �����Ű�°��� �����ϴ�."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "USB ��ġ�� ����̹� ����."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "X ��Ʈ ���� ���� (X �����츦 ��ϱ� ���ؼ��� �ʼ��Դϴ�)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "� ���񽺰� ���ýÿ� �ڵ� ����Ǿ�� ���� �����ϼ���."
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "�μ�"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "���ͳ�"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "���� ����"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "�ý���"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "���� ����"
-
-# ../../share/compssUsers
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "�����ͺ��̽� ����"
-
-# #msgid "Services: %d activated for %d registered"
-# #msgstr "����: ��ϵ� %2$d �� %1$d Ȱ��ȭ��"
-#: ../../services.pm_.c:170
-#, fuzzy, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "����: ��ϵ� %2$d �� %1$d Ȱ��ȭ��"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "����"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "������"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "������"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "���񽺿� ���"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"�˼��մϴ�.\n"
-"�� ���񽺿� ���� �߰������� �����ϴ�."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "�ڵ�����"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "����:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "����"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "�ٸ� ������ ���� ��������"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "���ͳ� �׼���"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "��Ƽ�̵�� - �׷���"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "����"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "��Ʈ�� ����"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "��Ʈ�� �������̽�"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB ���� ȣ��Ʈ"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "����"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "������"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "��Ű�� ��ġ ��..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"�ϵ� ��ũ�� ��Ƽ�� ���̺��� ������ �����ϴ�. �ʹ� ������ �� �����ϴ�. :(\n"
-"�߸��� ��Ƽ�� ���⸦ �õ��� ���Դϴ�."
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "����!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "�ʿ��� �̹��� ���� %s�� ã�� �� �����ϴ�."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "�ڵ� ��ġ ������"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"���� �ڵ� ��ġ �÷��Ǹ� ���� ���Դϴ�. �̰��� �ټ� ������ �۾��� �� �� ����"
-"��, �����ϰ� ���Ǿ����� �մϴ�.\n"
-"\n"
-"�̰��� Ư¡��, �Ϻ� ���� �����ϱ� ���Ͽ� �Ϻ� �������� ��ȭ��尡 ��Ÿ����� "
-"������, �⺻������ �� ��ǻ�Ϳ��� ������ ��ġ�۾��� �ڵ��ݺ��ϰ� �մϴ�.\n"
-"\n"
-"�������� ������, �� ��ǻ�ͻ󿡼��� ��ġ�������� �������, ��Ƽ�� ������� ��"
-"���ϱ�� �ڵ����� �̷������ �ʽ��ϴ�.\n"
-"\n"
-"��� �����մϱ�?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "�ڵ� ���� ������"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr "�� ������ ���Ͽ� ������ġ�� �ڵ��ݺ���ġ�� �����ϼ���."
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "�����մϴ�!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"�÷��ǰ� ���������� �����Ǿ����ϴ�.\n"
-"���� ��ġ������ �ݺ��� �� �ֽ��ϴ�."
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "��ġ"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "����� �߰�"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "������ ������ �����մϱ�?"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "�߸��� ��� ����"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "�߸��� ��� ����"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "�߸��� ��� ����"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "���� ����"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "��ġ�� ��Ű�� ����"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "�׸� ����"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "��������(TM) ����"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "����ڸ�"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "���콺�� �׽�Ʈ�ϼ���."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "�ٽ� �õ��ϼ���."
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "�ٽ� �õ��ϼ���."
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "��й�ȣ Ȯ��"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN ����"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "������ �������� �����ϼ���."
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Ű���� ���̾ƿ� ����"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "��ü�� Ŭ���ϼ���."
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "��ġ�� ��Ű�� ����"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "�߸��� ��� ����"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "���콺�� �׽�Ʈ�ϼ���."
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "�߸��� ��� ����"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "��Ʈ�� �������̽�"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "����ڸ�"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "��ġ�� ��Ű�� ����"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "����� �� ������ �ּ���."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "�ϵ� ��ũ ����"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "����ڸ�"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "�� ���콺"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "�� ���콺"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "��� �ɼǵ�:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "��Ʈ�� ȯ�� ����"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "��ġ�� ��Ű�� ����"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "��ġ�� ��Ű�� ����"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "���Ͻý��� �غ�"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "�ɼǵ�"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "� �ø��� ��Ʈ�� ���콺�� ����Ǿ� �ֳ���?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "��Ʈ�� ȯ�� ����"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "�߸��� ��� ����"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "� ������ ���콺�� ����Ͻʴϱ�?"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "�߸��� ��� ����"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "� ������ ���콺�� ����Ͻʴϱ�?"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "��Ÿ"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "�ý��� ��ġ"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "����� ����"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- ����"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "����:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "�߸��� ��� ����"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "����� ����"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "���� ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "��ġ ��Ű�� ����"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "����� �� ������ �ּ���."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "����� �� ������ �ּ���."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "����� �� ������ �ּ���."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "�߸��� ��� ����"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "�߸��� ��� ����"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "�߸��� ��� ����"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "��ġ�� �˻��ϰ� �ֽ��ϴ�..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "���콺�� �׽�Ʈ�ϼ���."
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "��ġ�� ��Ű�� ����"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "��Ʈ�� ȯ�� ����"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "��Ʈ�� ȯ�� ����"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "����"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "LAN ����"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "���Ͻý��� �غ�"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s ��ġ ����. ������ ���� ������ �߻��߽��ϴ�:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "��Ʈ�� ī�带 ã���� �����ϴ�"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "�Ϸ�"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "��ġ �غ����Դϴ�"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "����"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "��Ƽ�� ����"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "LAN ����"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "����Ʈ ��ġ"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "������ ��Ƽ���� �����ϼ���"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "���ǽ�"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "����"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "������"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "�ý��� ��ġ"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "������ �����ϼ���."
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "������ ����"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "�ʱ�ȭ �޽���"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "��Ʈ�� ����͸� ã�� �� �����ϴ�!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "��ġ"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "��Ʈ�� ����͸� ã�� �� �����ϴ�!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "��ġ ����"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "���ͳ� ���� ����"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "���� ���ͳ� ���� ������ ������ �����Դϴ�."
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"���ͳ� ������� ������ �̹� �Ϸ�Ǿ����ϴ�.\n"
-"���� ������ �����Դϴ�.\n"
-"\n"
-"���� �۾��� �Ͻðڽ��ϱ�?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "����"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "���"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "�缳��"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "���� ���� ��..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "���� ���ͳ� ���� ������ �����Ǿ����ϴ�."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "���� ���ͳ� ���� ������ �Ұ����� �����Դϴ�."
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"���ͳ� ������� ������ �̹� �Ϸ�Ǿ����ϴ�.\n"
-"���� �Ұ����� �����Դϴ�.\n"
-"\n"
-"���� �۾��� �Ͻðڽ��ϱ�?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "���"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "���� ��� ��"
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "���� ���ͳ� ���� ������ ���Ǿ����ϴ�."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"���� ���ͳ� ���� ������ ���ؼ� ���� ��ǻ�͸� �����Ϸ��� �մϴ�.\n"
-"�̷�����, ���� ��Ʈ���� �ٸ� ��ǻ�͵鵵 �� ��ǻ���� ���ͳ� ������ ����� �� "
-"�ְ� �˴ϴ�.\n"
-"\n"
-"����: ���� ��Ʈ��(��)�� �������� ��ġ�� ��Ʈ�� ����Ͱ� �־�� �մϴ�."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "�������̽� %s (%s ��� ���)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "�������̽� %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "��Ʈ�� ����͸� ã�� �� �����ϴ�!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"��� ��Ʈ�� ����͵� �߰ߵ��� �ʽ��ϴ�. �ϵ���� ���� ������ ������ ������."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "��Ʈ�� �������̽�"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"�ý��ۿ� ���� �ϳ��� ������ ��Ʈ�� ����Ͱ� �ֽ��ϴ�:\n"
-"\n"
-"%s\n"
-"\n"
-"�� ����ͷ� ���� ��Ʈ���� ������ ���Դϴ�."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "��� ��Ʈ�� ����Ͱ� ���� ��Ʈ������ ����� ������ �����ϼ���."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "��Ʈ�� ����� �������� �ʾҽ��ϴ�."
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "�ڵ� CUPS ����"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "���ͳ� ���� ����"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS ���� IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "���� ���� %s���� �������� �� �ּ� �浹�� �߰ߵ˴ϴ�!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "��ȭ�� ������ �����Ǿ����ϴ�!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"���! ������ ��ȭ�� ������ �����Ǿ����ϴ�. ��ġ�� ���� �Ŀ� ���� ������ �ʿ�"
-"�� �ֽ��ϴ�."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "���� ��..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "��ũ��Ʈ ���� ��, ����Ʈ���� ��ġ ��, ���� ���� ��..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "��Ű�� ��ġ�� ���� �߻� %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"��� ���� �����Ǿ����ϴ�.\n"
-"���� �ڵ� ��Ʈ�� �������(DHCP)���� ���� ��Ʈ������ �ٸ� ��ǻ�Ϳ� ���ͳ� ��"
-"�� ������ �� �� �ֽ��ϴ�."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "������ �̹� �Ϸ�Ǿ�����, ���� ������ �����Դϴ�."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "������ �̹� �Ϸ�Ǿ�����, ���� ���� �����Դϴ�."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "��� ���ͳ� ���� ������ ������ ���� �����ϴ�."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "���ͳ� ������� ����"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"���ͳ� ������� ��ƿ��Ƽ�� �� ���̽��ϴ�!\n"
-"\n"
-"%s\n"
-"\n"
-"�����縦 �����Ϸ��� ���������� ��������."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "��Ʈ�� ���� (%d ���)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "��������: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "�������� �����"
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "���� ��������"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "�� ��������..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"���� �������� �̸� (�� ���������� ���� ���������� �纻���μ� ����� ���ϴ�.):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "ȣ��Ʈ��:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "���ͳ� �׼���"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "����: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "����Ʈ����:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "�������̽�:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "����:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "���ͳ� ���� ����..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN ����"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "����̹�"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "�������̽�"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "��������"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "����:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "���� ��Ʈ�� ����..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "�����縦 �����Ϸ��� ���⸦ ��������. ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "������..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "����"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "��ٷ� �ּ���... ������ �����ϰ� �ֽ��ϴ�."
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "�����"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "���� �ȵ�"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "����..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "���� ����..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"������ �������̽��� �����ϴ�.\n"
-"���������� ���� �������̽��� ���� �����ϼ���."
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN ����"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "����� %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "��Ʈ ��������"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "���ý� ���۵�"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP Ŭ���̾�Ʈ"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "���� Ȱ��ȭ"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "���� ��Ȱ��ȭ"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"���ͳ� ������ �����ϴ�.\n"
-"���������� ���� ���� ������ �����ϼ���."
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "���ͳ� ���� ����"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "���ͳ� ���� ����"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "���� ����: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "����"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "����Ʈ����"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "�̴��� ī��"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP Ŭ���̾�Ʈ"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "���� ���� ����"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "��Ʈ�� ����"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "����� ������ �����ϼ���."
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "ij���� (����)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "���̽�����"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "�ø��� ���콺"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "����: keyboarddrake [--expert] [����]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Ű���� ���̾ƿ� ����"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "�ֿܼ��� �齺���̽� Ű�� ����⸦ �ϵ��� �Ͻðڽ��ϱ�?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "CDROM �ٲٱ�"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"��ġ CD-ROM�� ���� �Ŀ� ��Ȯ�Ρ��� ��������.\n"
-"CD-ROM�� ���ٸ�, ����ҡ��� ���̺� ���׷��̵带 ����ϼ���."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "���̺� ���׷��̵带 ������ �� �����ϴ�!!! \n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "�α׵巹��ũ"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "���� ��¥�� ���ظ� ���̱�"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/����(F)/���� �����(_N)"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/����(F)/����(_O)"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/����(F)/����(_S)"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/����(F)/�� �̸����� ����(_A)"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/����(F)/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/�ɼ�(_O)"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/�ɼ�(O)/�׽�Ʈ"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/����(_H)"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/����(H)/�� ���α׷���(_A)..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-"-misc-fixed-medium-r-*-*-*-120-75-75-*-*-iso8859-1,-*-gulim-medium-r-normal--"
-"*-120-75-75-c-*-ksc5601.1987-0,*-r-*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-"-misc-fixed-bold-r-*-*-*-120-75-75-*-*-iso8859-1,-*-gulim-bold-r-normal--*-"
-"120-75-75-c-*-ksc5601.1987-0,*-r-*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "����ڸ�"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "�޽���"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "�ý��� �α�"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "�˻�"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "�α� �м� ����"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "������"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "ã�� ���ڿ�"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "������ ���ڿ�"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "���� ����"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "�޷�"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "���� ����"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "��ٷ� �ּ���. ���� �м� ��: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "���ͳ� ����"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"������ ���� ������ �� ���̽��ϴ�.\n"
-"\n"
-"���⼭ �α��ΰ� ��й�ȣ�� �ʿ� �Ǵ� �ʿ������ �ʴ�\n"
-"HTTP�� FTP �����ø� ������ �� �ֽ��ϴ�.\n"
-
-# ../../share/compssUsers
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "����ġ�� ����FTPD"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "����"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "����"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "���� ��"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "���ͳ� ����"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "�� �̸����� ����"
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "� ������ ���콺�� ����Ͻʴϱ�?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "�߰ߵ� �ø���_USB�� �����ϴ�.\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "3��ư ���ķ���Ʈ?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "�׷��� ī�� ����"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "��Ʈ ��ġ"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "��ȭ�� ����"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "��ȭ�� ����"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"��ȭ��\n"
-"\n"
-"��ȭ���� �̹� �����Ǿ� �ֽ��ϴ�.\n"
-"��ȭ���� ���� �Ǵ� �����Ϸ���, ���������� ��������."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"��ȭ��\n"
-"\n"
-"ǥ�� ��ȭ���� �����Ϸ���, ���������� ��������."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "��� ����"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "��ġ Ŭ���� ����"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "�ϵ� ��ũ ����"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "���콺 ����"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "���� ����"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "����"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "���Ͻý��� �غ�"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "��Ƽ�� ����"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "��ġ ��Ű�� ����"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "�ý��� ��ġ"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "����� �߰�"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "��Ʈ�� ����"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "���� ����"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "��Ʈ�δ� ��ġ"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "��Ʈ��ũ ����"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X ����"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "�ý��� ��ġ"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "��ġ ����"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"TinyFirewall ����\n"
-"\n"
-"�̰��� ������ �ǵ巹��ũ �ý����� ���� ��ȭ���� �����մϴ�.\n"
-"������ ���� ��ȭ���� ����ϰ� �ʹٸ�, �ǵ巹��ũ ���� ��ȭ��\n"
-"�������� ���Ͻñ� �ٶ��ϴ�."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"���� ���ͳ����κ��� ������ �� �ִ� ���񽺿� ���� ������ �� ���Դϴ�.\n"
-"��ǻ���� ���Ȼ� �߿��ϹǷ� �� ������ �����ؼ� ���Ͻñ� �ٶ��ϴ�.\n"
-"\n"
-"���� �߿� ������� �ʴ� ���� �ִٸ�, ��ȭ������ �����ϴ�.\n"
-"�� ������ ������ �� ���α׷��� �ٽ� ���������ν� \n"
-"������ �� �ֽ��ϴ�!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"���׳��� ��𼭶� ������ �� �ִ� �������� ����մϱ�?\n"
-"���� ���� �� ��ǻ�Ϳ����� ������ �� �ִ� �������� ����Ѵٸ�,\n"
-"�����ϰ� ���ƴϿ����� ��������.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"���� ������ ����մϱ�?\n"
-"���� IP�� ���� ������ ��ü ���ͳ����� �������� �������� �ʾҴٸ�,\n"
-"���ƴϿ����� ��������.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"���� ��(SSH) ������ ����Ͻðڽ��ϱ�?\n"
-"�̰��� �ܺο��� �α����ϱ����� ���Ǵ� �ڳ� ��� ���α׷�\n"
-"�Դϴ�. ������ �ڳ��� ����ϰ� �ִٸ�, SSH�� �ٲټ���.\n"
-"�ڳ��� ��ȣȭ�� �Ǿ� ���� �ʱ� ������, ���� �ڳ��� ����� ��,\n"
-"�ܺ� �����ڰ� ��ȣ�� ��ĥ �� �ֽ��ϴ�. SSH�� ��ȣȭ�� ����ϱ�\n"
-"������ �̷� ��û���κ��� �����մϴ�."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"�ܺ� �ڳ� ������ ����Ͻðڽ��ϱ�?\n"
-"���� ȭ�鿡�� �����ߵ���, �̰��� ���� ������ ���Դϴ�.\n"
-"���ƴϿ����� ������ SSH�� ����� ���� ������\n"
-"�����մϴ�.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"���ͳݿ��� ������ �� �ִ� FTP ������ ����մϱ�?\n"
-"���� �׷��ϴٸ�, �͸� ���Ӹ��� ����� ���� ������\n"
-"�����մϴ�. FTP�� ���� ��ȣȭ�� ������� �ʱ� ������\n"
-"FTP�� ���۵Ǵ� ��� ��ȣ�� �����ڿ��� ����� �� �ֽ��ϴ�.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"���� ������ ����մϱ�?\n"
-"���� pine, mutt �Ǵ� �� ���� �ؽ�Ʈ ��� ���� ���α׷��� ����Ѵٸ�, \n"
-"�ʿ��մϴ�. �׷��� �ʴٸ� ��ȭ������ ��������.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"POP �Ǵ� IMAP ������ ����մϱ�?\n"
-"�̰��� ����ڵ鿡�� �� ����� �ƴ� ������� ���� ������ \n"
-"������ �� ���˴ϴ�.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"2.2 Ŀ���� ����ϰ� �ִ� �� �մϴ�. ��Ʈ�� IP�� �� �Ǵ� �繫��\n"
-"���� �ٸ� ��ǻ�ʿ� ���� �ڵ� �Ҵ�ȴٸ�(���� IP),\n"
-"�̰��� �ʿ��մϴ�.\n"
-"�̿� ���� ȯ�濡 �ֽ��ϱ�?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"�� ��ǻ���� �ð��� �ٸ� ��ǻ�Ϳ� ���� ����ȭ �˴ϱ�?\n"
-"�밳 �̰��� �߱� ���н�/������ ���ܿ��� �α� ��� �Ǵ�\n"
-"�� ���� �뵵�θ� ���� ���˴ϴ�. �� ��ǻ�Ͱ� ��Ը�\n"
-"�繫�� ��Ʈ���� �����ϰ� ���� �ʰų�, �̰Ϳ� ���� ó��\n"
-" ��� ���ٸ�, �Ƹ� �ʿ����� ���� ���Դϴ�."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"���� �Ϸ�. ���� ������ ��ũ�� �����ұ��?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "%s�� �� �� �����ϴ�: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "%s�� ���� ���� �� �� �����ϴ�: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "��ȭ�� ����"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "��ġ �غ����Դϴ�. ��� ��ٸ�����."
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "��/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "��Ʈ�� ��ǻ�� (Ŭ���̾�Ʈ)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS ����, ��� ����, ������ ����, SSH ����"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "���ǽ�"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "GNOME ��ũ�����̼�"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm pilot �Ǵ� Visor�� ������"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "��ũ�����̼�"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "��ȭ��/�����"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "������ ���� �� ��Ʈ�� ���� ����"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"���ǽ� ���α׷���: �������μ��� (kword, abiword), �������彬Ʈ (kspread,"
-"gnumeric), pdf ���, ���"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "����� ���� ����; mp3/midi �÷��̾�, �ͼ�, ���"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "������ �� ���� ����Ʈ��� ���� ������ Howto����"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE ��ũ�����̼�"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, ������ ����Ŀ, �ζ���ư��Ʈ, Fvwm, ���"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "��Ƽ�̵�� - ����"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "����, ����, ��, ��������, ä�ÿ� ��������"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "�����ͺ��̽�"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL �Ǵ� MySQL �����ͺ��̽� ����"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "���� ��ǻ�� ������ ���� ����"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "��Ƽ�̵�� - ����"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "��ƿ��Ƽ"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "����"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "�ܼ� ����"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "postfix ���� ����, Inn ���� ����"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "���ͳ� �����̼�"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "��Ƽ�̵�� �����̼�"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "����"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "�߰� �׷��� ����ũž (Gnome, IceWM)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "K Desktop ȯ��, �������� ������ ������ �⺻ �׷��� ȯ��"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "�׷��� ȯ��"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "����ġ�� ����FTPD"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CD ���� �� ���� ����"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "���ǽ� ��ũ�����̼�"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "����"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "�׳�, Icewm, ������ ����Ŀ, �ζ���ư��Ʈ, Fvwm, ���"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "GIMP ���� �׷��� ���α׷�"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C/C++ ���� ���̺귯��, ���α׷� �� �������"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "��Ʈ�� ��ǻ�� ����"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "����/�׷����/����"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "���� �����̼�"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "���� �÷��̾� �� ������"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "��Ƽ�̵�� - �׷���"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "�峭�� ���α׷�: arcade, boards, strategy, ���"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr "����/������ �ϰ� ������ ���˻��� ���� ��������(pine, mutt, tin...)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "��ī�̺�, ���ķ�����, ����͸�"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "���� ����"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "����� ģȭ�� ���α׷��� ����ũž ������ ���� �׷��� ȯ��"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "SSH �� �ٸ� ���������� Ŭ���̾�Ʈ"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "���ͳ� ����Ʈ����"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "���� �� ���� ����/���� ���α׷�"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "��Ÿ �׷��� ����ũž"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "������, ��, ���ϵ���, �͹̳�"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "gnucash ���� �ڱݰ��� ���α׷�"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "���� ��������"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "��Ƽ�̵�� - CD ����"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "���� ��ũ�����̼�"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "����"
-
-#, fuzzy
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr ""
-#~ "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,-*-gulim-bold-r-"
-#~ "normal--16-*-*-*-c-*-ksc5601.1987-0,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr "Ŀ�ΰ� ��ġ�ϴ� ��⿡ ������ �� �����ϴ�.(���� %s�� ����)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "����"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "�⺻ �����͸� �����ϼ���!"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "����/������ �ٽ��б�"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "���� %s ����̹��� �ɼ��� ������ �� �ֽ��ϴ�."
-
-#~ msgid "Low"
-#~ msgstr "����"
-
-#~ msgid "Medium"
-#~ msgstr "����"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "�� ����� ���Ȼ��� ���������� ���� �����ϴ�. ���� ���� ����� ������\n"
-#~ "��Ÿ���ϴ�."
-
-#~ msgid "mount failed"
-#~ msgstr "����Ʈ ����"
-
-#~ msgid "Boot mode"
-#~ msgstr "��Ʈ ���"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "������"
-
-#, fuzzy
-#~ msgid ""
-#~ "To know about the options available for the current printer read either "
-#~ "the list shown below or click on the \"Print option list\" button. %s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "���� �����Ϳ� ����� �� �ִ� �ɼ� ����� ������, ���μ� �ɼ� ��ϡ��� ����"
-#~ "����.\n"
-#~ "\n"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/�������� �ð��� GMT(�׸���ġ ���� �ð�)�� �����ϸ鼭, ���õ� �ð���"
-#~ "��\n"
-#~ "���� �����Ͽ� ǥ���մϴ�."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "���ͳݿ� ����"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "���ͳ� ���� ����"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "��Ʈ�� ���� ���� (LAN �Ǵ� ���ͳ�)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "� ��ũ�� �̵��ϰ� �����ʴϱ�?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "��ġ�� ��Ű�� ����"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "����"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "GNOME ��ũ�����̼�"
-
-#~ msgid "authentification"
-#~ msgstr "����"
-
-#~ msgid "user"
-#~ msgstr "�����"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "� ������ ���콺�� ����Ͻʴϱ�?"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "��ȿ�� NFS �����ڿ� �˻� ��"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "���� %s���� ��ȿ�� NFS �����ڿ� �˻� ��"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "��ȿ�� ��� �����ڿ� �˻� ��"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "���� %s���� ��ȿ�� ��� �����ڿ� �˻� ��"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "����"
-
-#~ msgid "Removable media"
-#~ msgstr "Ż���� �̵��"
-
-#~ msgid "Active"
-#~ msgstr "Ȱ��ȭ"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "�ƴϿ�"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "������, �� \"%s\", �߰�"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "���� ������ ��ġ"
-
-#~ msgid "Printer Device"
-#~ msgstr "������ ��ġ"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "��ġ/���� �̸��� ã�� �� ����!"
-
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "���� CUPS ������ ������"
-
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "���� ������ ������"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "������"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "�ý���"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "��Ÿ"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Ű���� ���̾ƿ� ����"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "��ü�� Ŭ���ϼ���."
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "����: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "�߸��� ��� ����"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "X ����"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "������ ��ġ"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "���"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Ȯ��"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "�ݱ�"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "���� ��..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "���� ���� ��..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "���� ������ ���� �ʽ��ϴ�.\n"
-#~ "��Ʈ ������� �������� ����\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "�� �����ϼ���."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "���� �ý����� ������ ������ �����Դϴ�."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "��ġ�� ��Ű������ �� �뷮 ����"
-
-#~ msgid "Total size: "
-#~ msgstr "��ü ũ��: "
-
-#~ msgid "Please wait, "
-#~ msgstr "��ø� ��ٸ�����, "
-
-#~ msgid "Total time "
-#~ msgstr "��ü �ð� "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "�̹� �ִ� X11 ������ ����Ͻðڽ��ϱ�?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "��� ��ġ�� �����Ͱ� ����Ǿ� �ֽ��ϱ�? \n"
-#~ "(����: ��/dev/lp0���� ��LPT1���� �ش��մϴ�.)\n"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr "���: �̹� ������ ��Ʈ�� �ּҰ� �ֽ��ϴ�. �ٽ� ������ ���Դϴ�."
-
-#~ msgid "New"
-#~ msgstr "���� �����"
-
-#~ msgid "Remote"
-#~ msgstr "����"
-
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr ""
-#~ "���� ��ư �� �ϳ��� �����ų�,\n"
-#~ "\n"
-#~ "������ ����⡹�� �̿��ϼ���."
-
-#~ msgid "Use \"New\""
-#~ msgstr "������ ����⡹���"
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr "���� ������ ���ϴ� �׸��� ã�� �� ���ٸ�, ���⿡ �Է��ϼ���:"
-
-#~ msgid "Shared resource"
-#~ msgstr "������ �ڿ�"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "�ָ��� ǥ��(%s), ���� �ڼ��� ������ �ּ���.\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (�⺻�� %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "���� ������? (�⺻���� %s, ���ٸ顸none���Է�) "
diff --git a/perl-install/share/po/lt.po b/perl-install/share/po/lt.po
deleted file mode 100644
index f68be5356..000000000
--- a/perl-install/share/po/lt.po
+++ /dev/null
@@ -1,13994 +0,0 @@
-# Lithuanian transaltion of DrakX
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# K�stutis Kru�ikas <DrKestas@takas.lt>, 1999
-# Mykolas Norvai�as <Myka@centras.lt>, 1999-2001
-# Gediminas Paulauskas <menesis@delfi.lt>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX \n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-03-04 23:55+0200\n"
-"Last-Translator: Mykolas Norvai�as <Myka@centras.lt>\n"
-"Language-Team: Lithuanian <komp_lt@konferencijos.lt>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-13\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-#, fuzzy
-msgid "Use Xinerama extension"
-msgstr "Naudokite automatin� aptikim�"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "skaitomi nustatymai"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Vaizdo plok�t�"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Pasirink vaizdo plok�t�"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Pasirink X server�"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X serveris"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Pasirink X server�"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X serveris"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kuri� XFree konfig�racij� tu nori tur�ti?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Tavo plok�t� palaiko 3D �renginio akseleracij�, bet tik su XFree %s.\n"
-"Tavo plok�t� dirba su XFree %s, kuris galb�t geriau palaiko 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Tavo plok�t� palaiko 3D akseleracij� su XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s su 3D �renginio akseleracija"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"J�s� korta palaiko 3D akseleracija su XFree %s.ATMINKITE, KAD TAI YRA "
-"EKSPERIMENTINIS PALIKYMAS IR GALI PAKABINTI KOMPIUTER�."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s su EKSPERIMENTINE 3D �renginio akseleracija"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"J�s� korta palaiko 3D �renginio akseleracija tik su XFree %s,\n"
-"ATMINKITE, KAD TAI YRA EKSPERIMENTINIS PALIKYMAS IR GALI PAKABINTI "
-"KOMPIUTER�.\n"
-"J�s� korta dirba su XFree %s kuris galb�t geriau palaiko 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfig�ravimas"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Pasirink savo vaizdo plok�t�s atminties dyd�"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Pasirink serverio nuostatas"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Pasirink monitori�"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitorius"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Du svarbiausi dyd�iai yra vertikalaus atnaujinimo da�nis, kuris rodo,\n"
-"kaip da�nai perpie�iamas visas ekranas, ir horizontaliosios skleistin�s "
-"da�nis, kuris parodo, kaip greit perpie�iamos eilut�s.\n"
-"\n"
-"Tai LABAI SVARBU, kad nenurodytum skleistin�s da�nio, didesnio\n"
-"u� palaikom� monitoriaus, nes gali j� sugadinti. Jeigu abejoji,\n"
-"pasirink konservatyvi� nuostat�."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontalaus atnaujinimo da�nis"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikalaus atnaujinimo da�nis"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitorius nenurodytas"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Vaizdo plok�t� dar nenurodyta"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Dar nepasirinkta skiriamoji geba"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Ar tu nori i�bandyti nustatymus?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Persp�jimas: �ios plok�t�s bandymas gali pakabinti kompiuter�"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Nustatym� tikrinimas"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"pabandyk pakeisti kai kuriuos parametrus"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "�vyko klaida:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Baigiu per %d sekund�i� (-es)"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ar toks nustatymas tave tenkina?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "�vyko klaida, bandyk pakeisti kai kuriuos parametrus"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Skiriamoji geba"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Pasirink skiriam�j� geb� ir spalv� gyl�"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Vaizdo plok�t�: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 serveris: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Dar"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Gerai"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Eksperto Re�imas"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Rodyti visk�"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Skiriamosios gebos"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klaviat�ros i�d�stymas: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Pel�s tipas: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Pel�s �renginys: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitorius: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitoriaus horiz. skleistin�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitoriaus vert. skleistin�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Vaizdo plok�t�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Vaizdo plok�t�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Vaizdo atmintis: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Spalv� gylis: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Skiriamoji geba: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 serveris: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 tvarkykl�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Ruo�iami X-Window nustatymai"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "K� tu nori daryti?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Pakeisti monitori�"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Pakeisti vaizdo plok�t�"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Pakeisti serverio nustatymus"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Pakeisti skiriam�j� geb�"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Rodyti informacij�"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Patikrinti v�l"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "I�eiti"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"I�laikyti pakeitimus?\n"
-"Esama konfig�racija yra:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X paleid�iant"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Tu gali nustatyti, kad X startuot� automati�kai.\n"
-"Ar tu nori, kad X startuot� po kompiuterio perkrovimo?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Pra�om i� naujo paleisti %s, kad pakeitimai b�t� aktyvuoti"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Pra�om atsisveikinti ir paskui paspausti Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 spalvos (8 bitai)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 t�kst. spalv� (15 bit�)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 t�kst. spalv� (16 bit�)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milijonai spalv� (24 bitai)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijardai spalv� (32 bitai)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB ar daugiau"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standartinis VGA 640x480 prie 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA 800x600 prie 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Suderinamas su 8514, 1024x768 prie 87 Hz interlaced (n�ra 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 prie 87 Hz interlaced, 800x600 prie 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "I�pl�stas Super VGA, 800x600 prie 60 Hz, 640x480 prie 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 prie 60 Hz, 800x600 prie 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Auk�to da�nio SVGA, 1024x768 prie 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Daugiada�nis, galintis 1280x1024 prie 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Daugiada�nis, galintis 1280x1024 prie 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Daugiada�nis, galintis 1280 prie 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitorius, galintis 1600x1200 prie 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitorius, galintis 1600x1200 prie 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Pirmasis �krovos skirsnio sektorius"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Pirmasis kaupiklio sektorius (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO �diegimas"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kur nori �diegti �krovos tvarkykl�?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/GRUB �diegimas"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO su tekstiniu meniu"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO su grafiniu meniu"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "�krova su DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "�krovos tvarkykl�s pagrindin�s parinktys"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Naudojama �krovos tvarkykl�"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "�krovos tvarkykl�s �diegimas"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "�krovos �renginys"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nedirba su senais BIOS'ais)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakti�kas"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakti�kas"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Vaizdo re�imas"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Palaukti prie� �kraunant �prast� atvaizd�"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Slapta�odis"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Slapta�odis (v�l)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Grie�tos komandin�s eilut�s parinktys"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "grie�ta"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "I�valyti /tmp kiekvien� kart� �krovus"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tikslus RAM atminties dydis (rasta %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Leisti kelet� profili�"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Nurodyk RAM atminties dyd� (MB)"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Parinktis �Grie�tos komandin�s eilut�s parinktys� yra nenauding� be "
-"slapta�od�io"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Pra�om bandyti v�l"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Slapta�od�iai nesutampa"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-#, fuzzy
-msgid "Default OS?"
-msgstr "�prastas"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"�ia yra skirtingi �ra�ai.\n"
-"Tu gali pakeisti esamus arba prijungti naujus."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Prid�ti"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Atlikta"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Taisyti RAID"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Kokio tipo �ra�� tu nori prid�ti?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Kitos OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Kitos OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Kitos OS (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Atvaizdas"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "�akninis"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Pridurti"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Skaitymui-ra�ymui"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Lentel�"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nesaugus"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "�ym�"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "�prastas"
-
-#: ../../any.pm_.c:326
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "I�mesti �ra��"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Tu��ia �ym� neleid�iama"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Tu privalai tur�ti swap skirsn�"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "�i �ym� jau naudojama"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Rasti %s %s interfeisai"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Ar turi dar vien�?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Ar tu turi kok� nors %s interfeis�?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Taip"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Pa�i�r�k �rangos informacij�"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "�diegiama tvarkykl� %s plok�tei %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modulis %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koki� %s tvarkykl� tur��iau i�bandyti?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Kartais %s tvarkyklei reikia papildomos informacijos, kad dirbt� gerai,\n"
-"nors normaliai turi veikti ir be jos. Ar tu nori jai nurodyti papildomas\n"
-"parinktis, ar leisi pabandyti nusistatyti pa�iai. Bandymas gali\n"
-"pakabinti kompiuter�, bet tai netur�t� padaryti �alos."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatinis bandymas"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Nurodyti parinktis"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Dabar tu gali nustatyti %s modulio nustatymus.\n"
-"Opcij� formatas yra toks : ''vardas=reik�m� vardas2=reik�m�2 ...''.\n"
-"Pvz, ''io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modulio parinktys:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Modulio %s i�kvietimas nepavyko.\n"
-"Ar nori bandyti su kitais nustatymais?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s jau prid�tas)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "�is slapta�odis pernelyg paprastas"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Pra�om suteikti vartotojo vard�"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Vartotojo vardas turi susidaryti tik i� ma��j� raid�i�, skai�i� ir simboli� "
-"`-' bei `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "�is vartotojo vardas jau prid�tas"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Prid�ti vartotoj�"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"�vesk vartotoj�\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Priimti vartotoj�"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Tikras vardas"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Vartotojo vardas"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatinis pasisveikinimas"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"A� galiu nustatyti taip, kad vienas vartotojas pasisveikint� automati�kai.\n"
-"Jei nenori to naudoti, spausk mygtuk� Nutraukti."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Pasirink �prast� vartotoj�:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Pasirink, kuri� lang� tvarkykl� naudosi:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Pra�om pasirinkti kalb�, kuri� naudosi."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Tu gali pasirinkti kitas kalbas, kurios bus prieinamos po �diegimo"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Visos"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Prid�ti vartotoj�"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Prisitaikyti"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS paleid�iamas"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Kokius j�s norite �diegti paketus"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Nutraukti"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Sveiki atvyk� � cracker'i� �al�"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Menkas"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standartin�"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Auk�tas"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Auk�tas"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoji�kas"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"�iame lygyje reikia elgtis atsargiai. Tai leid�ia lengviau naudoti sistem�,\n"
-"bet labai jautriai: ji tur�t� neb�ti naudojama kompiuteriuose,\n"
-"sujungtais su kitais arba prie Interneto. �ia n�ra slapta�od�i�."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Dabar slapta�od�iai yra �jungti bet naudoti kaip tinklin� kompiuter� dar "
-"nerekomenduojama."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"�is saugumo lygis yra standartinis, rekomenduojamas kompiuteriui, kuris\n"
-"naudojamas prisijungti prie interneto kaip klientas. N�ra joki� saugumo "
-"tikrinim�."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Su �iuo saugumo lygiu sistem� jau galima naudoti kaip server�. Saugumas\n"
-"yra pakankamai auk�tas, kad sistem� b�t� galima naudoti serveriui, kuris "
-"priima\n"
-"prisijungimus i� daugyb�s klient�."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Dabar naudojami 4 lygio privalumai,bet sistema yra visi�kai u�daryta.\n"
-"Saugumo savyb�s yra maksimalios."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Pasirink saugumo lyg�"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Nustatomas saugumo lygis"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Pasirink serverio nuostatas"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Sveiki, besinaudojantys %s, operaciju sistemu parinkikliu!\n"
-"\n"
-"Pasirink operaciju sistema is zemiau esancio saraso,\n"
-"arba palauk %d sekundziu, kad butu ikrauta pagal nutylejima\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Sveiki, besinaudojantys GRUB, operaciniu sistemu parinkikliu!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Naudok %c ir %c klavisus, kad pasirinktum, kuris irasas pazymetas"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Spausk enter, noredami ikrauti pasirinkta OS, 'e', noredami keisti"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandas pries ikrova, arba 'c', komandinei eilutei iskviesti "
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Pasirinktas irasas bus ikrautas automatiskai po %d sekundziu."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nepakanka vietos /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Darbastalis"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Paleidimo meniu"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kur nori �diegti �krovos tvarkykl�?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pagalba dar nesukurta.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "�diegimo Tipo Konfiguracija"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/Bylos"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Byla/I�eiti"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Monitorius"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Pakeisti monitori�"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "�krovos metu paleisti Aurora"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Skambinimo re�imas"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "�krovos re�imas"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Interneto jungties dalinimas"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-#, fuzzy
-msgid "Configure"
-msgstr "Nustatyti X"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistemos re�imas"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Startuojant paleisti X_Windows"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne, a� nenoriu automatinio pasisveikinimo"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Taip, a� noriu automatinio pasisveikinimo (vrtotojas, darbastalis)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Gerai"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "negaliu atidaryti /etc/inittab skaitymui: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minut�s"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minut�"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekund�s"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "A� daugiau negaliu prid�ti n� vieno skirsnio"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Tu gali pasirinkti kitas kalbas, kurios bus prieinamos po �diegimo"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Pranc�zija"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belg�"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Vokie�i�"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Graik�"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norveg�"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Pasi�i�r�ti"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Ital�"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "nuoseklioji"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Prad�iai padaryk atsargin� savo duomen� kopij�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Perskaityk �d�miai!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jeigu tu planuoji naudoti aboot, nepamir�k palikti tu��ios vietos (2048 "
-"sektori� pakanka)\n"
-"kaupiklio prad�ioje"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Klaida"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Meistras"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Pasirink veiksm�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tu turi vien� didel� FAT skirsn�\n"
-"(da�niausiai naudojamas Microsoft DOS/Windows).\n"
-"Patariu tau pakeisti to skirsnio dyd�\n"
-"(spragtel�k ant jo, tada ant �Pakeisti dyd�)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Pra�om spragtel�ti ant skirsnio"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detal�s"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "primontuoti nepavyko"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Tu��ias"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Kitas"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Byl� sistemos tipai:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Sukurti"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "R��is"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Naudok �%s� vietoj to"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "I�trinti"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Pirmiau naudok �Numontuoti�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Pakeitus skirsnio %s tip�, visi duomenys jame bus prarasti"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Pasirink veiksm�"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Sukurti nauj� skirsn�"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Pakeisti � eksperto re�im�"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Pakeisti � normal� re�im�"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Sugr��ti"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Ar vis tiek t�sti?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "I�eiti nei�saugojus"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "I�eiti nei�saugojus skirsni� lentel�s?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ar tu nori i�bandyti nustatymus?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automatinis suskirstymas"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "I�valyti visk�"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Pa�to informacij�"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Visi pirminiai skirsniai yra naudojami"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "A� daugiau negaliu prid�ti n� vieno skirsnio"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Jei nori tur�ti daugiau skirsni�, pra�om i�trinti vien�, kad vietoj jo "
-"gal�tum sukurti i�pl�stin�"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "�ra�yti skirsni� lentel�"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "I�gelb�ti skirsni� lentel�"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "I�gelb�ti skirsni� lentel�"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "I�gelb�ti skirsni� lentel�"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "I�imam� laikmen� automatinis montavimas"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Pasirink byl�"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Atsargin� skirsni� lentel� n�ra tokio paties dyd�io\n"
-"Vis tiek t�sti?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "D�mesio"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"�d�k diskel� � kaupikl�\n"
-"Visi duomenys diskelyje bus prarasti"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Bandau i�gelb�ti skirsni� lentel�"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Pa�to informacij�"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Prijungimo vieta"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Pasirinktys"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Pakeisti dyd�"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Perkelti"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatuoti"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Primontuoti"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Prid�ti � RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Prid�ti � LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Atjungti"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Pa�alinti i� RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Pa�alinti i� LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Taisyti RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Naudoti loopback'ui"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Sukurti nauj� skirsn�"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Prad�ios sektorius: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Dydis (MB): "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Byl� sistemos tipas: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Montavimo ta�kas: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Pirmenyb�: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Su�ymima loopback byla %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Pakeisti skirsnio tip�"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Kokios byl� sistemos tu nori?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kur nori primontuoti loopback byl� %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kur nori primontuoti �rengin� %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Negaliu nuimti montavimo ta�ko, nes �is skirsnis naudojamas loopback'ui.\n"
-"Pirma pa�alink loopback'us"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Skai�iuojami FAT byl� sistemos r��iai"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Kei�iamas dydis"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "�io skirsnio dyd�io neina pakeisti"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Pasidaryk atsargin� duomen� �iame skirsnyje kopij�"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Pakeitus skirsnio %s dyd�, visi duomenys jame bus prarasti"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Pasirink nauj� dyd�"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Dydis (MB): "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "� kur� disk� tu nori j� perkelti?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektorius"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "� kur� sektori� tu nori j� perkelti?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Perkeliama"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Perkeliamas skirsnis..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Pasirink jau esant� RAID, prie kurio prid�ti"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "naujas"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Pasirink jau esant� LVM, prie kurio prid�ti"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM vardas?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "�is skirsnis negali b�ti naudojamas loopback'ui"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback bylos vardas: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Tikras vardas"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Byla jau naudojama kitam loopback'ui, pasirink kit�"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "�i byla jau yra. Naudoti j�?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Modulio parinktys:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "�renginys"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "lygis"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "gabalo dydis"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "B�k atsargus: �i operacija yra pavojinga."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Kokio tipo skirsni� skaidymas?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Deja, ne�manoma sukurti /boot taip toli kaupiklyje (cilindre >1024).\n"
-"Arba naudok LILO ir tai neveiks, arba nenaudok LILO ir tau nereik�s /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Skirsnis, kur� tu pasirinkai kaip �aknin� (/), fizi�kai yra u� 1024-to\n"
-"disko kaupiklio cilindro, bet tu neturi /boot skirsnio. Jeigu planuoji\n"
-"naudoti LILO �krovos program�, neu�mir�k prid�ti /boot skirsnio"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Tu pasirinkai programin� RAID skirsn� kaip �aknin� (/).\n"
-"Jokia �krovos tvarkykl� negali su ja dirbti be /boot skirsnio.\n"
-"Taigi, nepamir�k sukurti /boot skirsnio"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "�renginio %s skirsni� lentel� bus �ra�yta � disk�!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Tau reikia perkrauti, kad pakeitimai b�t� veiksmingi"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Su�ym�jus skirsn� %s, visi duomenys jame bus prarasti"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Su�ymima"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Su�ymima loopback byla %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Su�ymimas skirsnis %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid nepavyko"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Naujiems skirsniams nepakanka laisvos vietos"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Naujiems skirsniams nepakanka laisvos vietos"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Skiriamoji geba: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "�renginys: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS kaupiklio raid�: %s (sp�jama)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipas: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Pavadinimas: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Prad�ia: sektorius %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Dydis: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektoriai(-i�)"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Nuo cilindro %d iki cilindro %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Su�ym�tas\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nesu�ym�tas\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Primontuotas\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback byla(os): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Skirsnis, �kraunamas pagal nutyl�jim�\n"
-"     (MS-DOS u�krovimui, ne LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Lygis %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Gabalo dydis %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID kaupikliai %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback bylos vardas: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Galimyb�s tokios, �is skirsnis\n"
-"yra Tvarkykl�s skirsnis\n"
-"gariau palikite j� ramyb�je.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"�is specialus Bootstrap\n"
-"skirsnis yra skirtas j�s�\n"
-"sistemos dvigubai �krovai.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Dydis: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindr�(-ai), %s galvu�i�(-os), %s sektori�(-iai)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM kaupikliai %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Skirsni� lentel�s tipas: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ant magistral�s %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Pasirinktys: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Byl� sistemos tipas: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"�is slapta�odis yra pernelyg paprastas (turi b�ti bent %d simboli� ilgio)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Slapta�od�iai nesutampa"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Pakeisti skirsnio tip�"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Pra�om spragtel�ti ant skirsnio"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS serveris"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s %s su�ym�jimas nepavyko"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ne�inau, kaip su�ym�ti %s tipu %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "klaida numontuojant %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "paprasta"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "serveris"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Tu negali naudoti JFS skirsniams, ma�esniems nei 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Tu negali naudoti ReiserFS skirsniams, ma�esniems nei 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Montavimo ta�kai turi prasid�ti /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jau yra skirsnis su montavimo ta�ku %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "�is katalogas turi pasilikti �aknin�je byl� sistemoje"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Tau reikia tikros byl� sistemos (ext2, reiserfs) �iam montavimo ta�kui\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Tau reikia tikros byl� sistemos (ext2, reiserfs) �iam montavimo ta�kui\n"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Naujiems skirsniams nepakanka laisvos vietos"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Klaida atidarant %s �ra�ymui: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"�vyko klaida -- nerasta tinkam� �rengini�, kur b�t� galima sukurti naujus "
-"skirsnius. Pra�om pasitikrinti savo �rang� d�l galimo gedimo"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Tu neturi joki� skirsni�!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Auk��iau yra s�ra�as Linux skirsni�, kuriuos pavyko rasti tavo\n"
-"kietajame diske. Tu gali pasilikti sprendimus, padarytus meistro, jie tinka\n"
-"daugumai atvej�. Jei nori pakeisti �iuos sprendimus, tu turi nurodyti bent\n"
-"�aknin� skirsn� (\"/\"). Nepasirink per ma�o skirsnio, nes tuomet tu "
-"negal�si\n"
-"�diegti pakankamai programin�s �rangos. Jei tu nori laikyti savo duomenis\n"
-"atskirame skirsnyje, pasirink, kur� naudosi \"/home\" (�manoma tik jei turi "
-"daugiau\n"
-"nei vien� Linux skirsn�).\n"
-"\n"
-"Tavo �iniai, skirsniai ra�omi tokiu pavidalu: \"Pavadinimas\", \"Talpa\".\n"
-"\n"
-"\n"
-"\"Pavadinimas\" sudaromas taip: \"kaupiklio tipas\", \"kaupiklio numeris\",\n"
-"\"skirsnio numeris\" (pavyzd�iui \"hda1\").\n"
-"\n"
-"\n"
-"\"Kieto disko tipas\" yra \"hd\", jei tavo kietasis kaupiklis yra IDE tipo, "
-"ir \"sd\", jeigu\n"
-"tai SCSI kaupiklis.\n"
-"\n"
-"\n"
-"\"kaupiklio numeris\" visada yra raid� po \"sd\" arba \"hd\". IDE "
-"kaupikliams:\n"
-"\n"
-"   * \"a\" rei�kia \"pagrindinis (master) diskas, prijungtas prie pirmojo "
-"(primary) IDE valdiklio\",\n"
-"\n"
-"   * \"b\" rei�kia \"�alutinis (slave) diskas, prijungtas prie pirmojo IDE "
-"valdiklio\",\n"
-"\n"
-"   * \"c\" rei�kia \"pagrindinis diskas, prijungtas prie antrojo (secondary) "
-"IDE valdiklio\",\n"
-"\n"
-"   * \"d\" rei�kia \"�alutinis diskas, prijungtas prie antrojo IDE valdiklio"
-"\",\n"
-"\n"
-"\n"
-"Su SCSI kaupikliais, \"a\" rei�kia \"pirmasis diskas\", \"b\" rei�kia "
-"\"antrasis diskas\" ir t.t."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Dabar tu gali pasirinkti tarnybas, kurias nori paleisti �krovos metu.\n"
-"\n"
-"\n"
-"U�vedus �ymekl� ant tarnybos, pasirodys pagalbos u�ra�as, kuris apra�o "
-"tarnybos\n"
-"vaidmen� tavo sistemoje.\n"
-"\n"
-"\n"
-"B�k ypa� atidus �iame �ingsnyje, jeigu �adi naudotis savo kompiuteriu kaip\n"
-"serveriu: tu tikriausiai nor�si nepaleisti joki� nereikaling� tarnyb�.\n"
-"Prisimink, kad kai kurios tarnybos gali b�ti pavojingos, jei naudojamos "
-"serveryje.\n"
-"Apskritai, pa�ym�k tik tas tarnybas, kuri� tau tikrai reikia."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Dabar tu turi nuspr�sti, kurioje savo kietojo disko vietoje nori �diegti\n"
-"Mandrake Linux operacij� sistem�. Jei jis yra tu��ias arba jau esanti\n"
-"operacij� sistema naudoja vis� viet� jame, tau reik�s sudalinti j�. Kietojo\n"
-"disko sudalinimas � skirsnius tiesiog yra jo logi�kas padalinimas taip, kad\n"
-"atsirast� laisvos vietos �diegti tavo naujajai Mandrake Linux sistemai.\n"
-"\n"
-"\n"
-"Kadangi sudalinimo skirsniais padariniai da�niausiai yra negr��tami,\n"
-"dalinimas gali b�ti g�sdinantis ir sunkus, jei tu esi nepatyr�s vartotojas.\n"
-"�is meistras supaprastina t� proces�. Prie� prad�damas, pra�au, nepagail�k\n"
-"laiko ir paskaityk �inyn�.\n"
-"\n"
-"\n"
-"Tau reikia ma�iausiai dviej� skirsni�. Vienas yra pa�iai operacij� "
-"sistemai,\n"
-"o kitas -- virtualiai atmin�iai (vadinamai swap).\n"
-"\n"
-"\n"
-"Jei skirsniai jau buvo apibr��ti (i� praeito �diegimo arba kitu dalinimo "
-"�rankiu),\n"
-"tau tereikia pasirinkti juos, kad �diegtum savo Linux'�.\n"
-"\n"
-"\n"
-"Jei skirsniai dar nebuvo apibr��ti, tu turi juos sukurti. Kad tai "
-"padarytum,\n"
-"naudokis auk��iau esan�iu meistru. Priklausomai nuo tavo kietojo disko\n"
-"situacijos, yra keli skirtingi sprendimai:\n"
-"\n"
-"* Naudoti esam� skirsn�: meistras rado vien� ar daugiau Linux skirsni� tavo "
-"sistemoje. Jei tu nori juos\n"
-"  naudoti, pasirink tai.\n"
-"\n"
-"\n"
-"* I�valyti vis� disk�: jei tu nori sunaikinti visus duomenis ir skirsnius, "
-"esan�ius kietajame diske, ir pakeisti juos\n"
-"  nauja Mandrake Linux sistema, gali pasirinkti �� variant�. B�k atsargus su "
-"�iuo sprendimu, nes jei sutiksi,\n"
-"  nebegal�si apsigalvoti ir sugr��ti.\n"
-"\n"
-"\n"
-"* Naudoti tu��i� viet� Windows skirsnyje: jei Microsoft Windows yra �diegti "
-"� kiet�j� disk� ir u�ima vis� viet�,\n"
-"  esan�i� jame, tau teks atlaisvinti vietos Linux duomenims. Kad tai "
-"padarytum, tu gali i�trinti Windows skirsn�\n"
-"  ir duomenis (�i�r�k \"I�valyti vis� disk�\" bei \"Eksperto re�imas\" "
-"sprendimus) arba pakeisti Windows skirsnio\n"
-"  dyd�. Dyd�io pakeitimas gali b�ti atliktas be duomen� praradimo. �is "
-"sprendimas yra rekomenduojamas, jei\n"
-"  tu nori naudoti tiek Mandrake Linux, tiek Microsoft Windows tame pa�iame "
-"kompiuteryje.\n"
-"\n"
-"\n"
-"  Prie� pasirinkdamas �� sprendim�, suprask, kad Microsoft Windows skirsnio "
-"dydis bus ma�esnis, nei yra\n"
-"  dabar. Tai rei�kia, kad tu tur�si ma�iau laisvos vietos Windows'uose "
-"�ra�yti duomenims bei �diegti naujas\n"
-"  programas.\n"
-"\n"
-"\n"
-"* Eksperto re�imas: jei tu nori rankomis sudalinti skirsniais savo kiet�j� "
-"disk�, gali rinktis �� variant�. �d�miai\n"
-"  pagalvok, prie� pasirinkdamas �� sprendim�. Jis yra galingas, ta�iau labai "
-"pavojingas. Tu gali prarasti \n"
-"  visus savo duomenis labai lengvai. Taigi, nesirink �io sprendimo, nebent "
-"tikrai �inai, k� darai."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Bet kokie naujai sukurti skirsniai turi b�ti su�ym�ti, kad juos\n"
-"b�t� galima naudoti (su�ym�jimas rei�kia byl� sistemos suk�rim�).\n"
-"\n"
-"\n"
-"Dabar tu gali nor�ti i� naujo su�ym�ti kai kuriuos esamus skirsnius, kad\n"
-"i�trintum duomenis i� j�. Jei nori tai padaryti, pa�ym�k ir tuos skirsnius,\n"
-"kuriuos nori su�ym�ti.\n"
-"\n"
-"\n"
-"Pastaba: neb�tina i� naujo su�ym�ti vis� anks�iau sukurt� skirsni�.\n"
-"Tu privalai su�ym�ti i� naujo skirsnius, kuriuose bus operacij� sistema\n"
-"(tokius kaip \"/\", \"/usr\" ar \"/var\"), ta�iau skirsni� su duomenimis, "
-"kuriuos\n"
-"nori i�laikyti, su�ym�ti nereikia (da�niausiai \"/home\").\n"
-"\n"
-"\n"
-"B�k atsargus, pasirinkdamas skirsnius, kadangi su�ymint visi duomenys\n"
-"bus i�trinti, ir nebebus �manoma j� atstatyti.\n"
-"\n"
-"\n"
-"Spausk \"Gerai\", kai b�si pasiruo��s skirsni� su�ym�jimui.\n"
-"\n"
-"\n"
-"Spausk \"At�aukti\", jei nori pasirinkti kitus skirsnius, � kuriuos �diegti\n"
-"Mandrake Linux sistem�."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Tavo naujoji Mandrake Linux operacij� sistema �iuo metu yra\n"
-"�diegiama. �is veiksmas tur�t� kelet� minu�i� u�trukti (tai priklauso nuo\n"
-"�diegiam� paket� bendro dyd�io bei kompiuterio spartos).\n"
-"\n"
-"\n"
-"Pra�om tur�ti kantryb�s."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Dabar tu turi pasirinkti, kuriuos skirsnius naudoti tavo naujai Mandrake "
-"Linux \n"
-"sistemai �diegti. Jei skirsniai jau buvo apibr��ti (i� praeito �diegimo arba "
-"kitu dalinimo �rankiu),\n"
-"tu gali naudoti esan�ius skirsnius. Kitu atveju, skirsniai turi b�ti "
-"apibr��ti.\n"
-"\n"
-"\n"
-"Kad sukurtum skirsnius, tu pirmiausia turi pasirinkti kiet�j� disk�. Disk� "
-"dalinimui\n"
-"gali pasirinkti, paspaud�s ant \"hda\" jei nori pirmo IDE kaupiklio, \"hdb\" "
-"-- antro,\n"
-"arba \"sda\", jei renkiesi pirm�j� SCSI kaupikl� ir t.t.\n"
-"\n"
-"\n"
-"Kad sudalintum skirsniais pasirinkt� kiet�j� disk�, gali naudotis vienu i� "
-"�i� variant�:\n"
-"\n"
-"   * I�valyti visk�: �is variantas i�trina visus skirsnius, esan�ius "
-"pasirinktame kietajame diske.\n"
-"\n"
-"\n"
-"  � * Automati�kai paskirti: �is variantas leid�ia automati�kai sukurti Ext2 "
-"bei swap skirsnius laisvoje tavo\n"
-"     disko vietoje.\n"
-"\n"
-"\n"
-"   * I�gelb�ti skirsni� lentel�: jei disko skirsni� lentel� yra sugadinta, "
-"tu gali bandyti atstatyti j� su �iuo variantu.\n"
-"     B�k atsargus ir prisimink, kad tai gali nepavykti.\n"
-"\n"
-"\n"
-"   * At�aukti: tu gali naudoti �� variant�, kad at�auktum visus tavo "
-"pakeitimus.\n"
-"\n"
-"\n"
-"   * I� naujo: tu gali rinktis �� variant�, kad atsisakytum vis� savo "
-"pakeitim� ir �keltum pradin� skirsni� lentel�.\n"
-"\n"
-"\n"
-"   * Meistras: jei tu nori, kad meistras tau pad�t� sudalinti kiet�j� disk�, "
-"rinkis �� variant�. Tai rekomenduojama, jeigu\n"
-"     tu nelabai i�manai apie skirsni� dalinim�.\n"
-"\n"
-"\n"
-"   * Atkurti i� diskelio: jei tu i�saugojai savo skirsni� lentel� � diskel� "
-"�diegdamas praeit� kart�, tu gali atkurti j�\n"
-"     naudodamasis �iuo variantu.\n"
-"\n"
-"\n"
-"   * I�saugoti � diskel�: jei tu nori i�saugoti savo skirsni� lentel� � "
-"diskel�, kad gal�tum paskui atkurti j�, rinkis ��\n"
-"     variant�. labai rekomenduojama, kad tu tai padarytum.\n"
-"\n"
-"\n"
-"   * Atlikta: jei tu baigei dalinti savo kiet�j� disk�, rinkis �� variant�, "
-"kad i�saugotum visus pakeitimus.\n"
-"\n"
-"\n"
-"Tavo �iniai, tu gali pasiekti bet kur� variant� naudodamasis klaviat�ra: "
-"vaik��iok tarp skirsni� su Tab bei\n"
-"Auk�tyn/�emyn rodykl�mis.\n"
-"\n"
-"\n"
-"Kai skirsnis yra parinktas, gali naudoti:\n"
-"\n"
-"* Ctrl-c kad sukurtum nauj� skirsn� (jei parinktas tu��ias skirsnis)\n"
-"\n"
-"* Ctrl-d kad i�trintum skirsn�.\n"
-"\n"
-"* Ctrl-m kad nurodytum prijungim� ta�k�."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Tavo kietajame diske buvo aptiktas vienas ar daugiau Microsoft Windows\n"
-"skirsnis. Pra�om pasirinkti, kurio i� j� dyd� nori pakeisti, kad �diegtum "
-"savo\n"
-"nauj�j� Mandrake Linux operacij� sistem�.\n"
-"\n"
-"\n"
-"Tavo �iniai, kiekvienas skirsnis s�ra�e u�ra�omas pavidalu \"Linux "
-"pavadinimas\",\n"
-"\"Windows pavadinimas\" \"Talpa\".\n"
-"\n"
-"\"Linux pavadinimas\" sudaromas taip: \"kaupiklio tipas\", \"kaupiklio "
-"numeris\",\n"
-"\"skirsnio numeris\" (pavyzd�iui \"hda1\").\n"
-"\n"
-"\"Kieto disko tipas\" yra \"hd\", jei tavo kietasis kaupiklis yra IDE tipo, "
-"ir \"sd\", jeigu\n"
-"tai SCSI kaupiklis.\n"
-"\n"
-"\n"
-"\"Kaupiklio numeris\" visada yra raid� po \"sd\" arba \"hd\". IDE "
-"kaupikliams:\n"
-"\n"
-"   * \"a\" rei�kia \"pagrindinis (master) diskas, prijungtas prie pirmojo "
-"(primary) IDE valdiklio\",\n"
-"\n"
-"   * \"b\" rei�kia \"�alutinis (slave) diskas, prijungtas prie pirmojo IDE "
-"valdiklio\",\n"
-"\n"
-"   * \"c\" rei�kia \"pagrindinis diskas, prijungtas prie antrojo (secondary) "
-"IDE valdiklio\",\n"
-"\n"
-"   * \"d\" rei�kia \"�alutinis diskas, prijungtas prie antrojo IDE valdiklio"
-"\",\n"
-"\n"
-"\n"
-"Su SCSI kaupikliais, \"a\" rei�kia \"pirmasis diskas\", \"b\" rei�kia "
-"\"antrasis diskas\" ir t.t.\n"
-"\n"
-"\n"
-"\"Windows pavadinimas\" yra raid�, kuria tas skirsnis buvo vadinamas "
-"Windows'uose\n"
-"(pirmasis disko skirsnis vadinamas \"C:\")"
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Pra�om tur�ti kantryb�s. �is veiksmas gali kelet� minu�i� u�trukti."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Pra�om pasirinkti ��diegti�, jei � sistem� n�ra �diegta ankstesni� Mandrake "
-"Linux versij�,\n"
-"arba jei nori naudoti kelias operacij� sistemas.\n"
-"\n"
-"Pra�om pasirinkti �Atnaujinti�, jei nori atnaujinti jau �diegt� Mandrake "
-"Linux versij�.\n"
-"\n"
-"\n"
-"Priklausomai nuo tavo �ini� apie GNU/Linux, tu gali pasirinkti �ias klases "
-"�diegti ar atnaujinti \n"
-"Mandrake Linux operacij� sistem�:\n"
-"\n"
-"* Rekomenduojama: jei niekad nesi �dieg�s GNU/Linux operacij� sistemos, "
-"pasirink �i�. �diegimas bus labai\n"
-"  lengvas, tav�s bus paklausta tik keletas klausim�.\n"
-"\n"
-"\n"
-"* Prisitaikyta: jei esi pakankamai susipa�in�s su GNU/Linux, tu gali "
-"pasirinkti pagrindin� sistemos paskirt�\n"
-"(darbo stotis, serveris, k�rimo). Tu tur�si atsakyti � daugiau klausim�, nei "
-"�Rekomenduojamoje� �diegimo\n"
-"klas�je, taigi turi �inoti, kaip veikia GNU/Linux, kad pasirinktum �i� "
-"klas�.\n"
-"\n"
-"\n"
-"* Eksperto: jei gerai i�manai GNU/Linux, gali pasirinkti �i� �diegimo klas�. "
-"kaip ir �Prisitaikytoje� klas�je,\n"
-"  tu gal�si pasirinkti pagrindin� sistemos paskirt�\t(darbo stotis, "
-"serveris, k�rimo). B�k labai atsargus, prie� \n"
-"  pasirinkdamas �i� �diegimo klas�. Tu gal�si atlikti smarkiai prisitaikyt� "
-"�diegim�.\n"
-"  Atsakyti � kai kuriuos klausimus gali b�ti itin sud�tinga, jei gerai "
-"nei�manai GNU/Linux. Taigi, nesirink �ios\n"
-"  �diegimo klas�s, nebent tikrai �inai, k� darai."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Pra�om pasirinkti teising� prievad�. Pavyzd�iui COM1\n"
-"MS Windows'uose vadinamas ttyS0 GNU/Linux'e."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) ir GRUB yra �krovos tvarkykl�s: jos gali �krauti\n"
-"tiek GNU/Linux, tiek bet koki� kit� operacij� sistem�, esan�i�\n"
-"kompiuteryje. Paprastai tos kitos operacij� sistemos yra teisingai\n"
-"atpa��stamos ir �diegiamos. Jeigu ne, tu gali prid�ti �ra�us pats �iame\n"
-"lange. B�k atidus ir pasirink teisingus parametrus.\n"
-"\n"
-"\n"
-"Tu taip pat gali u�drausti pri�jim� prie t� kit� operacij� sistem�\n"
-"bet kam, jei i�trinsi atitinkamus �ra�us. Bet tuo atveju, tau prireiks\n"
-"�krovos diskelio, kad jas �krautum!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Tu turi nurodyti, kur �ra�yti GNU/Linux paleidimui reikaling� informacij�\n"
-"\n"
-"\n"
-"Jeigu tu tiksliai ne�inai, k� darai, pasirink \"Pirmasis kaupiklio sektorius "
-"(MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX bandys surasti PCI SCSI adapter�(-ius). Jei DrakX\n"
-"ras SCSI adapter� ir �inos, koki� tvarkykl� naudoti, ji bus automati�kai\n"
-"�diegta.\n"
-"\n"
-"\n"
-"Jei tu neturi SCSI adapterio, turi ISA SCSI adapter� ar PCI SCSI adapter�,\n"
-"kurio DrakX nepa��sta, tav�s bus paklausta, ar sistemoje yra SCSI\n"
-"adapteris. Jei n�ra n� vieno, gali spausti �Ne�. Jei paspausi �Taip�, bus\n"
-"parodytas tvarkykli� s�ra�as, i� kurio gal�si pasirinkti tinkam� savo\n"
-"adapteriui.\n"
-"\n"
-"\n"
-"Jei tau teks rankomis nurodyti savo adapter�, DrakX papra�ys tav�s\n"
-"nurodyti jo nuostatas. Tu tur�tum leisti DrakX bandyti atpa�inti �rangos\n"
-"nuostatas. Da�niausiai tai suveikia.\n"
-"\n"
-"\n"
-"Jei ne, tau teks nurodyti tvarkykl�s nuostatas. Pra�om per�i�r�ti User "
-"Guide\n"
-"(chapter 3, section \"Collective informations on your hardware\") d�l "
-"patarim�,\n"
-"kaip su�inoti informacij� apie �rangos dokumentacij�, i� gamintojo "
-"svetain�s\n"
-"tinkle (jei turi pri�jim� prie interneto) arba i� Microsoft Windows (jei "
-"turi juos\n"
-"savo sistemoje)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot yra NewWorld MacIntosh gele�ies �krovos programa. Ji gali\n"
-"�krauti GNU/Linux, MacOS, arba MacOSX (jeigu egzistuoja j�s� kompiuteryje).\n"
-"Paprastai �ios operacin�s sistemos aptinkamos ir �diegiamos\n"
-"normaliai. Jeigu taip ne�vyko galite �iame ekrane sukurti �ra�� rankiniu "
-"b�du.\n"
-"B�kite atsarg�s pasirinkdami parametrus.\n"
-"\n"
-"\n"
-"Pagrindiniai Yaboot nustatymai yra:\n"
-"\n"
-"\n"
-"  - Init Message: Prane�imas parodomas prie� �krov�.\n"
-"\n"
-"\n"
-"\n"
-"  - Boot Device: Nurodykite kur pad�ti informacija kurios reik�sto \n"
-"�krauti GNU/Linux. Bendrai tariant j�s jau tur�jote sukurti bootstrap "
-"skirsn� \n"
-"kuri laikys �i� informacij�.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Skirtingai nuo LILO yaboot turi dvi pauzes\n"
-"Pirmoji pauz� matuojamas sekund�mis. �ia galite pasirinkti\n"
-"tarp CD, OF �krova, MacOS, arba Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: �is u�laikymas pana�us � LILO �krovos pauz�.  "
-"Pasirink� \n"
-"Linux jus tur�site �i� pauz� 0.1 sekund�s dalimis prie� pasirenkantkernelio\n"
-"apra�ym�.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Pasirinkdami �� nustatym� jums leis pasirinkti 'C' "
-"i�CD \n"
-"pirmoje �krovos u�klausoje.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Pasirinkus �� nustatym� jums leis pasirinkti 'N' Open\n"
-"Firmware pirmoje �krovos u�klausoje.\n"
-"\n"
-"\n"
-"  - Default OS: Galite pasirinkti kuri OS �sikraus pagal nutyl�jim� kai "
-"baigsis Open Firmware \n"
-"u�laikymas."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Pasirink kiet�j� disk�, kur� nori i�tu�tinti, kad �diegtum nauj�\n"
-"Mandrake Linux sistem�. B�k atsargus, visi duomenys, esantys jame, bus\n"
-"prarasti, ir j� nebebus �manoma atkurti."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Spausk \"Gerai\", jei nori i�trinti visus duomenis ir skirsnius, esan�ius\n"
-"�iame kietajame diske. B�k atsargus, kai paspausi \"Gerai\", tu nebegal�si\n"
-"atkurti joki� duomen� nei skirsni�, kurie buvo �iame diske, �skaitant bet\n"
-"kokius Windows duomenis.\n"
-"\n"
-"\n"
-"Spausk \"At�aukti\", kad nutrauktum operacij� ir neprarastum joki� duomen�\n"
-"nei skirsni�, esan�i� �iame kietajame diske."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Negalima naudoti transliavimo be NIS domeno"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "�d�k FAT formatuot� diskel� � kaupikl� %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Kad i�saugoti �i� paket� pasirinkim� �kraukite sistem� su ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Klaida skaitant byl� %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Kad kai kurie tavo kompiuterio �renginiai veikt�, jiems reikia\n"
-"taip vadinam� \"proprietary\" tvarkykli�. daugiau informacijos apie jas "
-"gali\n"
-"rasti �ia: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Tu turi tur�ti root skirsn�. Tam sukurk skirsn�\n"
-"(arba spragtel�k ant jau esamo). Tada pasirink\n"
-"veiksm� �Montavimo ta�kas� ir nurodyk jam �/�"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Tu privalai tur�ti swap skirsn�"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Tu neturi swap skirsnio\n"
-"\n"
-"Vis tiek t�sti?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Tu privalai tur�ti swap skirsn�"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Naudoti laisv� viet�"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Naujiems skirsniams nepakanka laisvos vietos"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Naudoti esam� skirsn�"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "N�ra jokio skirsnio, tinkamo naudojimui"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Naudoti Windows skirsn� loopback'ui"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kuri skirsn� tu nori naudoti Linux4Win �diegimui?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Pasirink dyd�ius"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "�akninio skirsnio dydis, MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Swap skirsnio dydis, MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Naudoti laisv� viet� Windows skirsnyje"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kurio skirsnio dyd� tu nori pakeisti?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Skai�iuojami Windows byl� sistemos r��iai"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT dyd�io keitimo programa nesusitvarko su tavo\n"
-"skirsniu, �vyko tokia klaida: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Tavo Windows skirsnis yra pernelyg fragmentuotas, pirma paleisk �defrag�"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"PERSP�JIMAS!\n"
-"\n"
-"DrakX dabar pakeis tavo Windows skirsnio dyd�. B�k atsargus: �is veiksmas\n"
-"yra pavojingas. Jeigu to dar nepadarei, dabar pats laikas i�eiti i� "
-"�diegimo,\n"
-"paleisti scandisk i� Windows (nepakenkt� ir defrag paleisti), o tada i� "
-"naujo\n"
-"prad�ti �diegim�. Taip pat tur�tum pasidaryti atsargin� duomen� kopij�.\n"
-"Kai viskas sutvarkyta, spausk Gerai."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Kok� dyd� nor�tum palikti Windows'ams"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "skirsnyje %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Nepavyko pakeisti FAT dyd�io: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"N�ra joki� FAT skirsni�, kuri� dyd� b�t� galima pakeisti arba naudoti juos "
-"loopback'ui\n"
-"(arba n�ra pakankamai laisvos vietos)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "I�trinti vis� disk�"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "I�mesti Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Tu turi daugiau negu vien� kiet� disk�, � kur� nori �diegti Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "VISI kaupiklyje %s esantys skirsniai ir duomenys bus prarasti"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Rankinis disk� skirstymas"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Naudoti fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Tu dabar gali sudalinti %s.\n"
-"Kai baigsi, nepamir�k i�saugoti su 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Windows skirsnyje n�ra pakankamai laisvos vietos"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "A� niekur negaliu rasti vietos �diegimui"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Skirsni� dalinimo meistras rado tokius sprendimus:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Dalinimas � skirsnius nepavyko: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Paleid�iamas tinklas"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "I�jungiamas tinklas"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"�vyko klaida, bet a� ne�inau, kaip su ja gra�iai susitvarkyti.\n"
-"T�sk darb� savo paties rizika."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Pasikartojantis montavimo ta�kas %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Kai kurie svarb�s paketai nebuvo tvarkingai �diegti.\n"
-"Arba tavo CD-ROM kaupiklis, arba CD yra su tr�kumais.\n"
-"Patikrink CD �diegtame kompiuteryje, naudodamas \"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Sveiki atvyk� � %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Neprieinamas n� vienas diskeli� kaupiklis"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "�einama � �ingsn� �%s�\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Tavo sistemoje ma�ai resurs�. Tu gali susidurti su b�domis, �diegdamas\n"
-"Mandrake Linux. Jei taip atsitikt�, gali pabandyti tekstin� diegimo b�d�:\n"
-"Kai u�sikrauna i� CDROM'o, paspausk `F1', o tada �vesk \"text\"."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "�diegimo klas�"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Pra�om pasirinkti vien� i� �i� �diegimo klasi�:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Grupi�, kurias tu pasirinkai, bendras dydis yra apie %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Jei tu nori �diegti ma�iau, nei �ia nurodyta,\n"
-"pasirink, kiek procent� paket� tu nor�tum �diegti.\n"
-"\n"
-"Jei procent� ma�ai, bus �diegti tik patys svarbiausi paketai;\n"
-"su 100% bus �diegti visi pa�ym�ti paketai."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Tu turi vietos diske tik %d%% �i� paket�.\n"
-"\n"
-"Jei tu nori �diegti ma�iau, nei �ia nurodyta,\n"
-"pasirink, kiek procent� paket� tu nor�tum �diegti.\n"
-"Jei procent� ma�ai, bus �diegti tik patys svarbiausi paketai;\n"
-"su %d%% bus �diegt� tiek paket�, kiek tik �manoma."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Sekan�iame �ingsnyje tu juos gal�si pasirinkti tiksliau."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Kiek procent� paket� �diegti"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Paket� grupi� pasirinkimas"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Atskir� paket� pasirinkimas"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Bendras dydis: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Blogas paketas"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Pavadinimas: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versija: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Dydis: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Svarba: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Tu negali pasirinkti �io paketo, kadangi neb�ra pakankamai vietos jam �diegti"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Ruo�iamasi �diegti �iuos paketus"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Ruo�iamasi pa�alinti �iuos paketus"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Tu negali pa�ym�ti/at�ym�ti �io paketo"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Tai yra privalomas paketas, jis negali b�ti at�ym�tas"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Tu negali at�ym�ti �io paketo. Jis jau yra �diegtas"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"�is paketas privalo b�ti atnaujintas\n"
-"Ar tu tikrai nori j� at�ym�ti?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Tu negali at�ym�ti �io paketo. Jis privalo b�ti atnaujintas"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "�diegti"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "I�saugoti � diskel�"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "I�saugoti paket� pasirinkim�"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "I�mesti"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Pasirink paketus, kuriuos tu nori �diegti"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "�diegiama"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Skai�iuojama"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Liko laiko "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Pra�ome palaukti. Ruo�iamas �diegimas"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paket�"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "�diegiamas paketas %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Sutinku"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Atmetu"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Pakeisk CD!\n"
-"\n"
-"Pra�om �ki�ti CD su u�ra�u �%s� � kaupikl�, tada paspausk Gerai.\n"
-"Jei tu jo neturi, spausk Nutraukti, kad i�vengtum �diegimo i� �io CD."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Vis tiek t�sti?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "�vyko klaida, bandant sutvarkyti paketus:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "�vyko klaida, �diegiant paketus:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Persp�jimas\n"
-"\n"
-"Pra�au �d�miai perskaityti �� susitarim�. Jeigu j�s nesutinkate nors\n"
-"su vienu kunktu jums neleid�iama naudoti �ios laikmenos. Paspauskite "
-"'Atmetu', \n"
-"kad t�sti �diegim� be �ios laikmenos.\n"
-"\n"
-"\n"
-"Kaikurie CD esantys komponentai n�ra pa�ym�ti \n"
-"GPL Licenzija ar ka�kuo pana�iu. Tokiu atveju kiekvienas\n"
-"komponentas turi savo licenzij�. \n"
-"Pra�au pirmiau perskaityti ir sutikti su tomis licenzijomis prie� \n"
-"naudojant arba perduodant tuos komponentus. \n"
-"Tokios licenzijos bandrai sulaiko komponent� perdavim�, kopijavim� \n"
-"(i�skyrus rezervin� kopij�), atvirk�tin� in�inerij�, \n"
-"de-assembly, de-compilation arba modifikavim�. \n"
-"Bet koks susitarimo lau�ymas atima i� j�s� visas �ios licenzijos suteiktas\n"
-"teises. Jeigu jums speciali licenzija nesuteikia �patink� �galiojim�\n"
-"j�s negalite �diegti �i� program� � daugiau negu vien� kompiuter�\n"
-"arba pritaikyti naudoti tinkle. Jei abejojate\n"
-"susisiekite tiesiai su gamintoju. \n"
-"�i� komponent� arba dokumentacijos  perdavimas tre�ioms �alims\n"
-"yra u�draustas.\n"
-"\n"
-"\n"
-"Visos CD diske esan�i� komponent� teis�s priklauso gerbiamiems\n"
-"j� autoriams ir saugomos intelektualios nuosavyb�s teises\n"
-"saugan�i� �statym�.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "�vyko klaida"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Ar tu nori i� naujo paleisti tinkl�"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licenzijos patvirtinimas"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klaviat�ra"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Pra�om pasirinkti klaviat�ros i�d�stym�."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "�ia yra galim� klaviat�r� s�ra�as"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Kurios �diegimo klas�s tu nori?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "�diegti/Atnaujinti"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Ar tai �diegimas, ar atnaujinimas?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Rekomenduojama"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Eksperto"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Atnaujinimas"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "I�saugoti paket� pasirinkim�"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Pra�om pasirinkti savo pel�s r���."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Pel�s prievadas"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-"Pra�om pasirinkti, prie kurios nuosekliosios jungties prijungta tavo pel�."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Nustatomos PCMCIA plok�tes..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Nustatome IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "n�ra prieinam� skirsni�"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Per�i�rimi skirsniai, ie�kant montavimo ta�k�"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Pasirink montavimo ta�kus"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"A� negaliu perskaityti skirsni� lentel�s, ji pernelyg sugadinta :(\n"
-"Galiu pabandyti i�valyti blogus skirsnius (VISI DUOMENYS bus prarasti!)\n"
-"Kitas sprendimas -- neleisti DrakX taisyti skirsni� lentel�.\n"
-"(klaida %s)\n"
-"\n"
-"Ar sutinki prarasti visus skirsnius?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake nesugeb�jo teisingai perskaityti skirsni� lentel�s.\n"
-"T�sk savo paties rizika!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Nerastas pagrindinis skirsnis"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "�akninis skirsnis"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Kur yra tavo sistemos �akninis skirsnis (/)?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Tau reikia perkrauti kompiuter�, kad skirsni� lentel�s pakeitimai b�t� "
-"naudojami"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Pasirink skirsnius, kuriuos nori su�ym�ti"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Ie�koti blog� blok�?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Su�ymimi skirsniai"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Sukuriama ir su�ymima byla %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nepakanka swap atminties �diegimo vykdymui, pra�om prapl�sti"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Ie�komi galimi paketai"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Ie�koma atnaujintin� paket�"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Tavo sistemoje neu�tenka vietos �diegimui arba atnaujinimui (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Pilnai (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimaliai (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Rekomenduojama (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Atstatyti i� diskelio"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Atstatyti i� diskelio"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Paket� grupi� pasirinkimas"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "�d�k diskel� � kaupikl� %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "I�saugoti � diskel�"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Pasirink paket� �diegimui"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Palauk"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Jei turi visus CD �emiau esan�iame s�ra�e, spausk Gerai.\n"
-"Jei neturi n� vieno i� �i� CD, spausk Nutraukti.\n"
-"Jei tr�ksta tik kai kuri� CD, at�ym�k juos, o tada spausk Gerai."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM su u�ra�u \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Ruo�iamas �diegimas"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"�diegiamas paketas %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Konfig�racija po �diegimo"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "�d�k diskel� � kaupikl� %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "�d�k tu��i� diskel� � kaupikl� %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Dabar j�s turite galimyb� parsisi�sti �iravimo program�.\n"
-"\"nPERSP�JIMAS:\n"
-"D�l �viari� programini� juridini�, teisini� ir kit� prie�a��i� jums\n"
-"reikia �sitikinti kad j�s galite parsisi�sti ir naudoti �it� programin�\n"
-"�rang�\n"
-"\n"
-"Prie� vartotojus kurie nesilaikys atitinkam� �statym� bus gali b�ti\n"
-"imtasi sankcij�\n"
-"Mandrakesoft neatsako u� netiesiogin� arba atsitiktinis arba koks nors\n"
-"kitoki� �al�.\n"
-"\n"
-"D4l i6kilusi7 klausim7 susisiekite su: \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Jungiamasi prie atvaizd�io (mirror), kad gautume prieinam� paket� s�ra��"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Pasirink atvaizd� (mirror), i� kurio imti paketus"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Jungiamasi prie atvaizd�io (mirror), kad gautume prieinam� paket� s�ra��"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Kokia tavo laiko juosta?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Ar tavo �rangos laikrodis nustatytas GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS serveris"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Nutol�s CUPS serveris"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Spausdintuvo n�ra"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Ar turi dar vien�?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Apibendrinimas"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Pel�"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Laiko juosta"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Spausdintuvas"
-
-#: ../../install_steps_interactive.pm_.c:1049
-#, fuzzy
-msgid "ISDN card"
-msgstr "Vidin� ISDN plok�t�"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-#, fuzzy
-msgid "Sound card"
-msgstr "Standartin�"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Naudoti NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Vietinis spausdintuvas"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Nurodyti root slapta�od�"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Jokio slapta�od�io"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"�is slapta�odis yra pernelyg paprastas (turi b�ti bent %d simboli� ilgio)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentikacija"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autentikacija"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "serveris"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autentikacijos NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS domenas"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS serveris"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"�krovos diskelis leid�ia pakrauti Linux sistem� be normalaus sistemos "
-"�kroviklio.\n"
-"Tai gali b�ti naudinga, jei tu nenori �diegti SILO � savo sistem�, arba "
-"kita\n"
-"operacij� sistema i�meta SILO, arba jei SILO nedirba su tokia �rangos "
-"konfig�racija.\n"
-"�krovos diskelis taip pat gali b�ti naudojamas su Mandrake rescue diskeliu, "
-"tokiu\n"
-"b�du pasidaro daug lengviau atkurti sistem� po smarki� gedim�.\n"
-"\n"
-"Jei nori sukurti �krovos diskel� savo sistemai, �ki�k diskel� � pirm�j�\n"
-"�rengin� ir spausk \"Gerai\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Pirmasis diskeli� �renginys"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Antrasis diskeli� �renginys"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Praleisti"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"�krovos diskelis leid�ia pakrauti Linux sistem� be normalaus sistemos "
-"�kroviklio.\n"
-"Tai gali b�ti naudinga, jeigu tu nenori �diegti LILO (arba GRUB) � savo "
-"sistem�,\n"
-"arba jei kita operacij� sistema i�meta LILO, arba jei LILO nedirba su esama "
-"�rangos\n"
-"konfig�racija. �krovos diskelis taip pat gali b�ti naudojamas su Mandrake "
-"rescue\n"
-"diskeliu, tokiu b�du pasidaro daug lengviau atkurti sistem� po smarki� "
-"gedim�.\n"
-"\n"
-"Ar tu nori sukurti �krovos diskel�?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Atleisk, bet neradau jokio diskeli� kaupiklio"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Pasirink kaupikl�, kur� nori naudoti �krovos diskeliui sukurti"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "�d�k diskel� � kaupikl� %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Kuriamas �krovos diskelis"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Ruo�iama �krovos tvarkykl�"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Ar nori naudoti aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Klaida �diegiant aboot,\n"
-"bandyti �diegti priverstinai, net jei tai sunaikint� pirm�j� skirsn�?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "�diegti �krovos tvarkykl�"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Nepavyko �diegti �krovos tvarkykl�s. �vyko tokia klaida:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "�d�k tu��i� diskel� � kaupikl� %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Kuriamas automatinio �diegimo diskelis"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Kai �ingsniai buvo nebaigti.\n"
-"\n"
-"Ar tu nori i�eiti dabar?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Sveikiname. �diegimas baigtas.\n"
-"I�trauk �diegimo laikmenas ir spausk Enter, kad perkrautum.\n"
-"\n"
-"\n"
-"Kad su�inotum apie pataisymus, kurie prieinami �iai Mandrake Linux laidai,\n"
-"pasi�i�r�k � Errata, kuris yra \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informacija apie tavo sistemos konfig�ravim� yra oficialioje\n"
-"Mandrake Linux User's Guide knygoje."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Sukurti automatinio �diegimo diskel�"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automatinis �diegimas reikalui esant gali b�ti pilnai\n"
-"automatizuotas. Tokiu atveju jis u�ims vis� disk�!!\n"
-"(turint omenyje �diegim� � kit� d���).\n"
-"\n"
-"J�s galb�t nor�site pakartoti �diegim�.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatinis"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Parodyti v�l"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "I�saugoti paket� pasirinkim�"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux �diegimas %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> tarp element�  | <Tarpas> parenka | <F12> kitas langas "
-
-#: ../../interactive.pm_.c:87
-#, fuzzy
-msgid "kdesu missing"
-msgstr "nieko"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Pasirink veiksm�"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "I�pl�stinis"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Pra�om palaukti"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "I�skleisti med�"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Suskleisti med�"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Perjungti tarp rikiavimo pagal grupes ar ab�c�l�"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Blogas pasirinkimas, bandyk v�l\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Tavo pasirinkimas? (pagal nutyl�jim� %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Tavo pasirinkimas? (pagal nutyl�jim� %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Pasirinktys: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Ar nori naudoti aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Tavo pasirinkimas? (pagal nutyl�jim� %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "�ek� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Vokie�i�"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorako"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Ispan�"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Suomi�"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Pranc�z�"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norveg�"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Lenk�"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rus�"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "�ved�"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Jungtin�s karalyst�s klaviat�ra"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "JAV klaviat�ra"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iranie�i�"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Arm�n� (senoji)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Arm�n� (spausd. ma�in�l�s)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Arm�n� (fonetin�)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaid�anie�i� (lotyni�ka)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belg�"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Arm�n� (fonetin�)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgar�"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazil� (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Baltarusi�"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "�veicar� (Voki�kas i�d�stymas)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "�veicar�. (Pranc�zi�kas i�d�stymas)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "�ek� (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Vokie�i� (be mirusi� klavi��)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dan�"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorako (JAV)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorako (Norveg�)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorako (JAV)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Est�"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzin� (\"Rusi�kas\" i�d�stymas)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzin� (\"Latin\" i�d�stymas)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Graik�"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Vengr�"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroat�"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraelio"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "�yd� (Fonetin�)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranie�i�"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Island�"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Ital�"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japoni�ka 106 klavi��"
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Jungtin�s karalyst�s klaviat�ra"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Lotyn� Amerikos"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lietuvi� ��ERTY (sena)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lietuvi� ��ERTY (nauja)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lietuvi� \"skai�i� eil�\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lietuvi� \"fonetin�\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Vieta"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonie�i�"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Oland�"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Lenk� (QWERTY i�d�stymas)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Lenk� (QWERTZ i�d�stymas)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugal�"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadie�i� (Kvebeko)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rusi�ka (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rusi�ka (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rusi�ka (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slov�n�"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovak� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovak� (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaid�anie�i� (kirilica)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Lentel�"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai klaviat�ra"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Thai klaviat�ra"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turk� (tradicinis \"F\" modelis)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turk� (�iuolaikinis \"Q\" modelis)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrainie�i�"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "JAV klaviat�ra (tarptautin�)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamie�i� \"skai�i� eil�\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslav� (lotyni�kas/kirilikos)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Loopback montavimai %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Pirmiausia i�meskite loginius tomus\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - pel�"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Paprasta PS2 pel� su ratuku"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-#, fuzzy
-msgid "1 button"
-msgstr "2 klavi��"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Paprasta 2 klavi�� pel�"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Paprasta"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Su ratuku"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "nuoseklioji"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Paprasta 3 klavi�� pel�"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (nuoseklioji, seno C7 tipo)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 klavi��"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 klavi��"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "jokios"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Pel�s n�ra"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Pra�om i�bandyti pel�"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Kad su�adintum pel�,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "PASUK RATUK�!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Suomi�"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Toliau ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Ankstesnis"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Ar taip teisinga?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Prisijungti prie interneto"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Labiausiai paplit�s b�das prisijungti su ADSL yra pppoe.\n"
-"Vis d�lto, kai kurios jungtys gali naudoti PPTP arba DHCP.\n"
-"Jei ne�inai, pasirink 'naudoti pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "naudoti dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "naudoti pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "naudoti pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Kur� DHCP klient� nor�tum naudoti?\n"
-"�prasta yra dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Neradau jokio ethernet tinklo adapterio tavo sistemoje.\n"
-"A� negaliu sutvarkyti �io jungties tipo."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Pasirink tinklo interfeis�"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Pra�om pasirinkti, kuri� tinklo plok�t� tu nori naudoti prisijungimui prie "
-"interneto"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nerasta jokia tinklo plok�t�"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfig�ruojamas tinklas"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Pra�om �vesti savo hosto vard�, jei j� �inai.\n"
-"Kai kuriems DHCP reikia, kad hosto vardas galiot�.\n"
-"tai tur�t� b�ti pilnai apra�ytas hosto vardas, pana�us\n"
-"� \"mano.filialas.istaiga.lt\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Hosto vardas"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Tinklo Konfig�ravimo Meistras"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "I�orin� ISDN plok�t�"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Vidin� ISDN plok�t�"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kokios r��ies tavo ISDN jungtis?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Aptikta ugniasien�s konfig�racija!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Aptikta ugniasien�s konfig�racija!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN konfig�ravimas"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Pasirink savo tiek�j�.\n"
-" Jei jo n�ra s�ra�e, pasirink Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "�krovos Protokolas"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Lik�s pasaulis"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Lik�s pasaulis \n"
-" be D-Channel (nuomojamos linijos)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Kur� protokol� nori naudoti?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Kokios r��ies plok�t� tu turi?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ne�inau"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Jei tu turi ISA plok�t�, reik�m�s sekan�iame ekrane tur�t� b�ti teisingos.\n"
-"\n"
-"Jei turi PCMCIA plok�t�, tu turi �inoti jos IRQ bei IO.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Nutraukti"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "T�sti"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Kuri yra tavo ISDN plok�t�?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"A� aptikau ISDN PCI plok�t�, ta�iau ne�inau jos tipo. Pasirink vien� PCI "
-"plok�t� sekan�iame ekrane."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Jokia ISDN PCI plok�t� nerasta. pra�om pasirinkti vien� kitame ekrane."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-"Pra�om pasirinkti, prie kurios nuosekliosios jungties yra prijungtas tavo "
-"modemas."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Prisiskambinimo nustatymai"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Jungties pavadinimas"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefono numeris"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Pasisveikinimo ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Paremtas skriptu"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Paremtas terminalu"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domeno vardas"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Pirmasis DNS serveris"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Antrasis DNS serveris"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Tu gali atsijungti arba i� naujo nustatyti jungt�."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Tu gali i� naujo nustatyti jungt�."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Tu dabar esi prisijung�s prie interneto."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Tu gali prisijungti prie interneto arba i� naujo nustatyti jungt�."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Tu dabar nesi prisijung�s prie interneto."
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Sujungimas..."
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Sujungimas..."
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Nustatyti tinkl�"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Interneto jungtis ir nustatymas"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Tu gali atsijungti arba i� naujo nustatyti jungt�."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Tu gali atsijungti arba i� naujo nustatyti jungt�."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Tinklo konfig�ravimas"
-
-#: ../../network/netconnect.pm_.c:139
-#, fuzzy
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Kadangi j�s diegiate per tinkl� j�s� tinklo nustatymai yra padaryti.\n"
-"Spragtel�kite ant Gerai kad perkonfiguruoti Network/Internet pasijungim� "
-"arbaat�aukti, kad praleisti �� punkt�.\n"
-
-#: ../../network/netconnect.pm_.c:165
-#, fuzzy
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Internet Pasijungimas\n"
-"\n"
-"Mes ruo�iam�s konfiguruoti j�s� internet/tinklin� pasijungim�.\n"
-"Jeigu nenorite naudoti automatinio aptikimo nuimkite �i� at�ym�.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Konfiguravimui pasirinkite prifail�"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Naudokite automatin� aptikim�"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Ie�koma �ranga..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Nustatyti normali� jungt� per modem�"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "aptiktas prievade %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN jungtis"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "aptiktas %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN jungtis"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "aptiktas interfeise %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabelin� jungtis"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Kabelin� jungtis"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN jungtis"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "aptiktos ethernet kortos(a)"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Pasirink kur� �rank� nor�tum naudoti"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Interneto jungties dalinimas"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Ar tu nori prisijungti tik �jungus?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Tinklo konfig�ravimas"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Ar tu nori i� naujo paleisti tinkl�"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Sveikiname, j�s� tinklo ir Internet konfiguracija baigta.\n"
-"\n"
-"Dabar konfiguracij� pritaikysime sistemai.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Po to rekomenduojame jums perleisti X aplink�,\n"
-"kad i�vengti problem� su kompiuterio vardu."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"PERSP�JIMAS: Gis �renginys jau anks�iau buvo sutvarkytas prisijungimui prie\n"
-"interneto. \n"
-"Papras�iausiai spausk Gerai, jei nori palikti j� tok�.\n"
-"Jei pakeisi k� nors �emiau esan�iuose laukuose, tai �sigalios vietoj sen�j� "
-"nuostat�."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Pra�om �ra�yti �io kompiuterio IP konfig�racij�.\n"
-"Kiekvienas laukas turi b�ti �ra�ytas kaip IP adresas\n"
-"de�imtainiais skai�iais su ta�kais (pvz. 192.168.2.36)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfig�ruojamas tinklo �renginys %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (tvarkykl� %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresas"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatinis IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresas tur�t� b�ti 1.2.3.4 formato"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Pra�om �vesti savo hosto vard�, jei j� �inai.\n"
-"tai tur�t� b�ti pilnai apra�ytas hosto vardas, pana�us\n"
-"� \"mano.filialas.istaiga.lt\".\n"
-"Taip pat gali �vesti �liuzo (gateway) IP adres�, jeigu tok� turi"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS serveris"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "�liuzo (gateway) �renginys"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxy konfig�racija"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy tur�t� b�ti http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy tur�t� b�ti ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Interneto konfig�ravimas"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Ar nori pabandyti prisijungti prie interneto dabar?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "I�bandoma jungtis..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sistema dabar prijungta prie interneto."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Neatrodo, kad sistema dabar prijungta prie interneto.\n"
-"Bandyk i� naujo konfig�ruoti jungt�."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Jungties konfig�ravimas"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Pra�om u�pildyti arba patikrinti �� laukel�"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Plok�t�s IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Plok�t�s mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Plok�t�s IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Plok�t�s IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Plok�t�s IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Tavo asmeninis tel. numeris"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Tiek�jo pavadinimas (pvz. tiekejas.lt)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Tiek�jo telefono numeris"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Tiek�jo DNS 1 (pasirinktinai)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Tiek�jo DNS 2 (pasirinktinai)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Pasirink klaviat�r�"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Skambinimo re�imas"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Jungties tipas: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Jungties tipas: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Pasisveikinimas (vartotojo vardas)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Slapta�odis"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "primontuoti nepavyko: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "I�pl�stiniai skirsniai �ioje platformoje nepalaikomi"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Skirsni� lentel�je yra tu��ios vietos, bet ji negali b�ti panaudota.\n"
-"Vienintelis sprendimas yra perkelti pirminius skirsnius taip, kad tu��ia "
-"vieta b�t� �alia i�pl�stini� skirsni�"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Nepavyko atstatyti i� bylos %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Bloga atsargin� byla"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Klaida �ra�ant � byl� %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Ka�kas blogo nutiko j�s� kaupikliui. \n"
-"Bandymas pabandyti jo vientisum� nepavyko. \n"
-"Tai sako, kad ra�ymas � j� bus visi�kas m��las. "
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "turi tur�ti"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "svarbus"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "labai gerai"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "nuostabu"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "galb�t"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Vietinis spausdintuvas"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Nutol�s spausdintuvas"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Nutol�s CUPS serveris"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Nutol�s lpd serveris"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Tinklo spausdintuvas (TCP/lizdas)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Spausdinimo serveris"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Spausdintuvo �renginio URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Vietinis spausdintuvas"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Nutol�s spausdintuvas"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Klaida �ra�ant � byl� %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modulis %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS serverio IP"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (�prastas)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Pasirink spausdintuvo jungt�"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kaip yra prijungtas spausdintuvas?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Su nutolusiu CUPS serveriu, tau �ioje vietoje nereikia nustatin�ti\n"
-"joki� spausdintuv�; jie bus automati�kai atpa��stami.\n"
-"Jeigu abejoji, pasirink \"Nutol�s CUPS serveris\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "LAN Konfiguravimas"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Nutol�s CUPS serveris"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresas tur�t� b�ti 1.2.3.4 formato"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Prievado numeris turi b�ti skai�ius"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS serverio IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Prievadas"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "�diegimo Tipo Konfiguracija"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Ie�koma �ranga..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Patikrinti prievadus"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Spausdintuvo n�ra"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Vietinis spausdintuvas"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Nutol�s spausdintuvas"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Naudokite automatin� aptikim�"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Nutol�s spausdintuvas"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "aptiktas %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Spausdintuvo �renginio URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Vietinis spausdintuvas"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr ""
-"Pra�om pasirinkti, prie kurios nuosekliosios jungties yra prijungtas tavo "
-"modemas."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Spausdintuvo �renginio URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Nustatymai"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "�diegiamas paketas %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "�diegiamas paketas %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Skaitoma CUPS tvarkykli� duomen�  baz�"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Skaitoma CUPS tvarkykli� duomen�  baz�"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Nutolusio lpd spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Nor�damas naudotis nutolusia lpd spausdinimo eile, tu turi\n"
-"nurodyti to serverio hosto vard� ir pavadinim� eil�s, kurioje\n"
-"bus talpinami darbai."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nutolusio hosto vardas"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Nutol�s spausdintuvas"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nutolusio hosto vardas"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nutolusio hosto vardas"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Nor�damas spausdinti � SMB spausdintuv�, tu turi\n"
-"nurodyti SMB hosto vard�, (Atkreipk d�mes�, kad jis gali skirtis nuo\n"
-"jo TCP/IP hosto vardo!) ir galb�t spausdinimo serverio IP adres�,\n"
-"spausdintuvo share'o vard�, vartotojo vard�, slapta�od� ir darbo grup�s vard�"
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB serverio hostas"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB serverio IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Share'o vardas"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Darbo grup�"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Nor�damas spausdinti � NetWare spausdintuv�, tu turi\n"
-"nurodyti spausdinimo serverio vard�, (Atkreipk d�mes�, kad jis gali\n"
-"skirtis nuo jo TCP/IP hosto vardo!), spausdintuvo eil�s vard� "
-"spausdintuvui,\n"
-"prie kurio nori prieiti, bei reikalingus vartotojo vard� ir slapta�od�."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Spausdinimo serveris"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Spausdinimo eil�s pavadinimas"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Lizdinio spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Kad gal�tum spausdinti � lizdin� spausdintuv�, turi pateikti\n"
-"spausdintuvo hosto vard� ir, galb�t, prievado numer�."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Spausdintuvo hosto vardas"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Spausdintuvo hosto vardas"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Spausdintuvo �renginio URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Spausdintuvo vardas"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Apra�ymas"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Vieta"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Skaitoma CUPS tvarkykli� duomen�  baz�"
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Nutol�s spausdintuvas"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Ar taip teisinga?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Nutol�s spausdintuvas"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Spausdintuvo jungtis"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Kokio tipo yra tavo spausdintuvas?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Modemo Nustatymai"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Interneto konfig�ravimas"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Ar tu nori i�bandyti spausdinim�?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Patikrinti prievadus"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Taip, spausdinti abu bandomuosius puslapius"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Spausdintuvas"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standartin�"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Spausdinamas bandomasis puslapis..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Spausdinamas bandomasis puslapis..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Spausdinamas bandomasis puslapis..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Spausdinamas bandomasis puslapis..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Bandomasis puslapis buvo nusi�stas spausdinimo demonui.\n"
-"Kol bus prad�ta spausdinti, gali tekti palaukti.\n"
-"Spausdinimo b�sena:\n"
-"%s\n"
-"\n"
-"Ar jis veikia teisingai?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Bandomasis puslapis buvo nusi�stas spausdinimo demonui.\n"
-"Kol bus prad�ta spausdinti, gali tekti palaukti.\n"
-"Ar jis veikia teisingai?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Spausdintuvo n�ra"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Pel�"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "I�jungiamas tinklas"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "I�jungiamas tinklas"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Skaitoma CUPS tvarkykli� duomen�  baz�"
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Interneto konfig�ravimas"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Spausdintuvo n�ra"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Skaitoma CUPS tvarkykli� duomen�  baz�"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Nustatyti spausdintuv�"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "I�bandoma jungtis..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Nustatyti tinkl�"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitorius nenurodytas"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfig�ruojamas tinklas"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Kuri� spausdinimo sistem� nori naudoti?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Auk�tas"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoji�kas"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Kuri� spausdinimo sistem� nori naudoti?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Pasirink spausdintuvo jungt�"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kuri� spausdinimo sistem� nori naudoti?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Nustatyti spausdintuv�"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "�diegiamas paketas %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Skaitoma CUPS tvarkykli� duomen�  baz�"
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Nustatyti spausdintuv�"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Ar nori nustatyti spausdintuv�?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"�ia yra �ios spausdinimo eil�s.\n"
-"Tu gali �ia prid�ti daugiau arba pakeisti esamas."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"�ia yra �ios spausdinimo eil�s.\n"
-"Tu gali �ia prid�ti daugiau arba pakeisti esamas."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Nustatyti tinkl�"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Normali"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Ar tu nori i�bandyti nustatymus?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Modemo Nustatymai"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Ar tu nori i�bandyti nustatymus?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Interneto jungties dalinimas"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Spausdintuvo jungtis"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Spausdinamas bandomasis puslapis..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Ar tu nori i�bandyti nustatymus?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Nutol�s spausdintuvas"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Skaitoma CUPS tvarkykli� duomen�  baz�"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Vietinis spausdintuvas"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ar tu nori i� naujo paleisti tinkl�"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Skaitoma CUPS tvarkykli� duomen�  baz�"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Proxy konfig�racija"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Prievadas"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Proxy tur�t� b�ti http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Prievado numeris turi b�ti skai�ius"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Proxy tur�t� b�ti ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Automatinis pasisveikinimas"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Slapta�odis"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Jokio slapta�od�io"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Slapta�od�iai nesutampa"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Negaliu prid�ti skirsnio prie _formatuoto_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Negaliu �ra�yti bylos %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid nepavyko"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid nepavyko (gal b�t tr�ksta raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "N�ra pakankamai sri�i� %d lygio RAID\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron yra periodin� komand� tvarkykl�."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd naudojamas akumuliatoriaus b�senai steb�ti ir u�ra�yti per\n"
-"syslog. Jis taip pat gali b�ti naudojamas kompiuterio i�jungti,\n"
-"kai tr�ksta energijos akumuliatoriuje."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Paleid�ia komandas laiku, nurodytu su at komanda, bei paleid�ia\n"
-"susikaupusias komandas tuomet, kai sistema ma�ai apkrauta."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron yra standartin� UNIX programa, paleid�ianti vartotojo nurodytas "
-"programas\n"
-"periodi�kai, nustatytu laiku. vixie cron prideda nema�ai galimybi� prie "
-"paprasto\n"
-"UNIX cron'o, �skaitant didesn� saugum� ir galingesnes parinktis."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM prideda pel�s palaikym� tekstin�se Linux programose, pvz.\n"
-"Midnight Commander. Ji suteikia galimyb� konsol�je kopijuoti ir �d�ti su\n"
-"pele, bei i�kviesti kontekstin� meniu."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache yra World Wide Web serveris. Jis naudojamas pateikti HTML\n"
-"byloms ir CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneto superserverio demonas (bendrai vadinamas inetd) paleid�ia\n"
-"�vairias interneto paslaugas, kai reikia. Jis atsakingas u� daugelio\n"
-"paslaug� paleidim�, �skaitant telnet, ftp, rsh ir rlogin. Inetd i�jungimas\n"
-"kartu i�jungia visas paslaugas, u� kurias jis yra atsakingas."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"�is paketas u�krauna pasirinkt� klaviat�ros i�d�stym�, kuris\n"
-"nurodytas /etc/sysconfig/keyboard byloje. Jis gali b�ti pasirinktas su\n"
-"kbdconfig priemone. Daugumoje kompiuteri� jis turi b�ti �jungtas."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd yra spausdinimo demonas, b�tinas, kad lpr veikt� tvarkingai.\n"
-"Tai yra tiesiog serveris, paskirstantis spausdinimo darbus spausdintuvui"
-"(ams)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) yra Domen� vard� serveris (DNS), naudojamas\n"
-"i�siai�kinti IP adresus pagal hosto vardus."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Primontuoja ir numontuoja visas Network File System (NFS), SMB\n"
-"(Lan Manager/Windows), ir NCP (NetWare) montavimo ta�kus."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"�jungia/I�jungia visas tinklo jungtis, nustatytas paleisti\n"
-"�krovos metu."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS yra populiarus protokolas dalintis byloms TCP/IP tinkluose.\n"
-"�i tarnyba teikia NFS serverio funkcionalum�, kuris tvarkomas\n"
-"/etc/exports byloje."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS yra populiarus protokolas dalintis byloms TCP/IP tinkluose.\n"
-"�i tarnyba teikia NFS byl� u�rakinimo funkcionalum�."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA skirtas palaikyti tokiems ne�iojam� kompiuteri� �renginiams,\n"
-"kaip modemai ir tinklo plok�t�s. Jis nebus paleid�iamas, jei n�ra "
-"sutvarkytas,\n"
-"tad saugu palikti j� net kompiuteriuose, kuriems jo nereikia."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper tvarko RPC jungtis, kurios naudojamos protokoluose,\n"
-"tokiuose kaip NFS bei NIS. portmap serveris turi b�ti paleistas "
-"kompiuteriuose,\n"
-"kurie veikia kaip serveriai protokol�, naudojan�i� PS jungtis."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix yra pa�to siuntimo agentas (MTA), tai yra programa,\n"
-"siun�ianti pa�t� i� vieno kompiuterio � kit�."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"I�saugo ir atkuria sistemos entropijos tvenkin� auk�tesn�s kokyb�s\n"
-"atsitiktini� skai�i� generavimui."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed demonas leid�ia automati�kai atnaujinti IP mar�rutizavimo lenteles,\n"
-"naudojant RIP protokol�. RIP pla�iai naudojamas ma�uose tinkluose, ta�iau\n"
-"sud�tinguose tinkluose gali prireikti sud�tingesni� protokol�."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokolas leid�ia tinklo vartotojams i�matuoti\n"
-"vykdymo metrikas bet kuriam kompiuteriui i� tinklo."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokolas leid�ia tinklo vartotojams su�inoti, kas yra\n"
-"prisijung�s prie kit� atsakin�jan�i� kompiuteri�."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokolas leid�ia nutolusiems vartotojams gauti s�ra��\n"
-"vartotoj�, prisijungusi� prie kompiuterio, kuriame veikia rwho demonas\n"
-"(pana�iai kaip finger)."
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Startuojant paleisti X_Windows"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog yra priemon�, kuri� daugelis demon� naudoja u�ra�yti\n"
-"log �ra�ams � �vairias sistemos log bylas.  Visada pravartu leisti syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Paleid�ia ir sustabdo X �rift� server� pakrovimo metu ir i�jungiant."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Pasirink kokias tarnybas �jungus paleisti automati�kai"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Spausdintuvas"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internetas"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Sistemos re�imas"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Nutolusio lpd spausdintuvo nuostatos"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Serveris, Duomen� bazi�"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "�renginys"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "D�mesio"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Pridurti"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "B�sena:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektorius"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Lik�s pasaulis"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Pri�jimas prie Interneto"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedija - grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-#, fuzzy
-msgid "Development"
-msgstr "K�rimo, Tinklapi�"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Prisijungti prie interneto"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Tinklo interfeisas"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB serverio hostas"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "�aidimai"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "�iniukas"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "privalomas"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "�diegiamas paketas %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"A� negaliu perskaityti tavo skirsni� lentel�s, ji man pernelyg sugadinta :(\n"
-"Pabandysiu i�valyti blogus skirsnius"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Klaida"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Konfig�racija po �diegimo"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "�diegimo Tipo Konfiguracija"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Sveikiname!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "�diegti"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Prid�ti vartotoj�"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Su�ymima loopback byla %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Bloga atsargin� byla"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Bloga atsargin� byla"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Bloga atsargin� byla"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Paket� grupi� pasirinkimas"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Pasirink paketus, kuriuos tu nori �diegti."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Pa�alinti eil�"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "I�mesti Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Vartotojo vardas"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Pra�om i�bandyti pel�"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Pra�om bandyti v�l"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Pra�om bandyti v�l"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Jokio slapta�od�io"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN jungtis"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Pasirink spausdintuvo jungt�"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Pra�om pasirinkti klaviat�ros i�d�stym�."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Pra�om spragtel�ti ant skirsnio"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Pasirink paketus, kuriuos tu nori �diegti."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Bloga atsargin� byla"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Pra�om i�bandyti pel�"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Bloga atsargin� byla"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Tinklo interfeisas"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Vartotojo vardas"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Pasirink paketus, kuriuos tu nori �diegti."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Pra�om pasirinkti kalb�, kuri� naudosi."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Ar naudoti kieto disko optimizavim�?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Ar naudoti kieto disko optimizavim�?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Palauk"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Su ratuku"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Su ratuku"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Modulio parinktys:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Tinklo konfig�ravimas"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Pasirink paketus, kuriuos tu nori �diegti."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Pasirink paketus, kuriuos tu nori �diegti."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Nustatyti byl� sistemas"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Pasirinktys"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-"Pra�om pasirinkti, prie kurios nuosekliosios jungties yra prijungtas tavo "
-"modemas."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Tinklo konfig�ravimas"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Bloga atsargin� byla"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Pra�om pasirinkti savo pel�s r���."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Bloga atsargin� byla"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Atstatyti i� diskelio"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Pra�om pasirinkti savo pel�s r���."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Kitas"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "�diegti sistem�"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Atstatyti i� bylos"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Atstatyti i� bylos"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Prisitaikyti"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/Pagalba"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Ankstesnis"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "B�sena:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Bloga atsargin� byla"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Atstatyti i� bylos"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Tekstas"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Pasirinkti paketus"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Pra�om pasirinkti kalb�, kuri� naudosi."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Pra�om pasirinkti kalb�, kuri� naudosi."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Pra�om pasirinkti kalb�, kuri� naudosi."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Bloga atsargin� byla"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Bloga atsargin� byla"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Bloga atsargin� byla"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "I�saugoti � byl�"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Pra�om i�bandyti pel�"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Pasirink paketus, kuriuos tu nori �diegti."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Tinklo konfig�ravimas"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Tinklo konfig�ravimas"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "LAN Konfiguravimas"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "LAN Konfiguravimas"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Nustatyti byl� sistemas"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s �diegimas nepavyko. �vyko tokia klaida:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s nerastas"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Atlikta"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Su�ym�ti diskel�"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Ruo�iamas �diegimas"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "grie�ta"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "grie�ta"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Su�ym�ti skirsnius"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "I�metami RPM'ai"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "LAN Konfiguravimas"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Prijungimo vieta"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Pasirink skirsnius, kuriuos nori su�ym�ti"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Biuras"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Nutraukti"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Spausdintuvas"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "�diegti sistem�"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Pasirink byl�"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Nutol�s spausdintuvas"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Tavo sistemoje nerasta jokia tinklo plok�t�!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "�diegti"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Tavo sistemoje nerasta jokia tinklo plok�t�!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "I�eiti i� �diegimo"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Interneto jungties dalinimas"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Interneto jungties dalinimas �iuo metu �jungtas"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneto jungties dalinimas jau buvo sutvarkytas.\n"
-"Jis �iuo metu �jungtas.\n"
-"\n"
-"Tai k� nor�tum daryti?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "i�jungti"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "nieko"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "i� naujo nustatyti"
-
-#: ../../standalone/drakgw_.c:146
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Ie�koma �ranga..."
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Interneto jungties dalinimas �iuo metu i�jungtas"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Interneto jungties dalinimas �iuo metu i�jungtas"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneto jungties dalinimas jau buvo sutvarkytas.\n"
-"Jis �iuo metu i�jungtas.\n"
-"\n"
-"Tai k� nor�tum daryti?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "�jungti"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Interneto jungties dalinimas �iuo metu �jungtas"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Tavo kompiuteris gali b�ti sutvarkytas taip, kad dalint�si interneto "
-"jungtimi.\n"
-"\n"
-"Pastaba: tau reikia atskiros tinklo plok�t�s, nustatytos vietiniam tinklui "
-"(LAN).\n"
-"\n"
-"Ar nor�tum sutvarkyti interneto jungties dalinim�?"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Interfeisas"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Tavo sistemoje nerasta jokia tinklo plok�t�!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Tavo sistemoje nerasta jokia tinklo plok�t�. pra�om paleisti �rangos "
-"nustatymo �rank�."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Tinklo interfeisas"
-
-#: ../../standalone/drakgw_.c:244
-#, fuzzy, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Tavo sistemoje yra tik viena sutvarkyta tinklo plok�t�:\n"
-"\n"
-"%s\n"
-"\n"
-"Ar nor�tum sutvarkyti savo vietin� tinkl� �iai plok�tei?"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Pra�om pasirinkti, kuri tinklo plok�t� bus prijungta prie vietinio tinklo."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitorius nenurodytas"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "�diegimo Tipo Konfiguracija"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Modemo Nustatymai"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS serverio IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Rastas galimas LAN adreso konfliktas esamose %s nuostatose!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Aptikta ugniasien�s konfig�racija!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"�sp�jimas! Aptikta ugniasien�s konfig�racija! Tau gali tekti kai k� "
-"i�taisyti rankomis po �diegimo."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfig�ruojama..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Konfig�ruojami skriptai, �diegiamos programos, paleid�iami serveriai..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Yra problem� �diegiant paket� %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Viskas buvo sukonfig�ruota.\n"
-"Tu gali dabar dalintis interneto jungtimi su kitais kompiuteriais vietiniame "
-"tinkle, naudojant automatin� tinklo konfig�racij� (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-#, fuzzy
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Interneto jungties dalinimas jau buvo sutvarkytas.\n"
-"Jis �iuo metu i�jungtas.\n"
-"\n"
-"Tai k� nor�tum daryti?"
-
-#: ../../standalone/drakgw_.c:690
-#, fuzzy
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Interneto jungties dalinimas jau buvo sutvarkytas.\n"
-"Jis �iuo metu �jungtas.\n"
-"\n"
-"Tai k� nor�tum daryti?"
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Interneto jungties dalinimas �iuo metu �jungtas"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Interneto jungtis ir nustatymas"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Interneto jungties dalinimas"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Tinklo konfig�ravimas (%d adapteris)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profailas: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "I�trinti profail�..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profailas i�trynimui:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Naujas profailas..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Kompiuterio vardas:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Pri�jimas prie Interneto"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipas: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "�liuzas (Gateway):"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfeisas:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "B�sena:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Nustatyti Pri�jim� prie Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN konfiguravimas"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Tvarkykl�"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfeisas"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Protocol"
-msgstr "Protokolas"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "B�sena:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Nustatyti Vietin� Tinkl�..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Meistras..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Nustatym� tikrinimas"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Sujungimas..."
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nepajungtas"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Sujungimas..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-#, fuzzy
-msgid "Disconnect..."
-msgstr "Sujungimas..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN Konfiguravimas"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapteris %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "�krovos Protokolas"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Startavo �krovos metu"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klientas"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Aktyvus"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Aktyvus"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Interneto jungties konfiguravimas"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Interneto Jungties Konfiguravimas"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Jungties tipas: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametrai"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "�liuzas (Gateway)"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet Korta"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klientas"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Nustatomas saugumo lygis"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Prisijungti prie interneto"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Pasirink kur� �rank� nor�tum naudoti"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanadie�i� (Kvebeko)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Island�"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "nuoseklioji"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "vartosena: keyboarddrake [--expert] [klaviat�ra]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Pra�om pasirinkti klaviat�ros i�d�stym�."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Ar tu nori, kad BackSpace ra�yt� Delete konsol�je?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Pakeisk CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Pra�om �ki�ti Installation CD-ROM � kaupikl� ir paspausti Gerai, kai "
-"baigta.\n"
-"Jei tu jo neturi, paspausk mygtuk� nutraukti, kad i�vengtum atnaujinimo."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "nepavyko paleisti gyvo atnaujinimo!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-#, fuzzy
-msgid "logdrake"
-msgstr "draknet"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Byla/_Nauja"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Byla/Atidaryti"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Byla/U�ra�yti"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Byla/U�ra�yti Kaip"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Byla/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/Pasirinktys"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Pasirinkys/Bandymas"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Pagalba"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Pagalba/_Apie..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Vartotojo vardas"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Patikrinti prievadus"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "Kompiuteris: "
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "Kompiuteris: "
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "LAN konfiguravimas"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "�e��linis"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "�domu"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "su�ymimas"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Nustatymai"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "U�ra�yti Kaip..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Pra�om pasirinkti savo pel�s r���."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_usb nerasta\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Ar emuliuoti tre�i� klavi��?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Pasirink vaizdo plok�t�"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "�krovos �renginys"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Aptikta ugniasien�s konfig�racija!"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Aptikta ugniasien�s konfig�racija!"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Pasirink savo kalb�"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Parink �diegimo klas�"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Kieto disko nustatymas"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Pel�s nustatymas"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Pasirink klaviat�r�"
-
-#: ../../steps.pm_.c:19
-#, fuzzy
-msgid "Security"
-msgstr "curly"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Nustatyti byl� sistemas"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Su�ym�ti skirsnius"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Pasirinkti paketus"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "�diegti sistem�"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Prid�ti vartotoj�"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Nustatyti tinkl�"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Nustatyti servisus"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "�diegti �krovos tvarkykl�"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Sukurti �krovos diskel�"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Nustatyti X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "�diegti sistem�"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "I�eiti i� �diegimo"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Adapteris %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Klaida atidarant %s �ra�ymui: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Tinklo Konfig�ravimo Meistras"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Pra�ome palaukti. Ruo�iamas �diegimas"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Serveris, Tinklapi�/FTP"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Tinklo Kompiuteris, X klientas"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Biuras"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome darbo stotis"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "�rankiai tavo Palm Pilot arba Visor"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "KDE darbo stotis"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Serveris, Firewall/Routeris"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Biuro programos: tekst� redaktoriai (kword, abiword), skai�iuokl�s (kspread, "
-"gnumeric), pdf per�i�ros programos ir pan."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Su garsu susij� �rankiai: mp3 ir midi grotuvai, mik�eriai ir pan."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knygos ir HOWTO apie Linux ir Free Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE darbo stotis"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "IceWM, Window Maker, Enlightenment, Fvwm ir pan."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedija - Vaizdas"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"�ranki� rinkinys pa�tui, naujienoms, �iniatinkliui, byl� siuntimui ir "
-"pokalbiams"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Serveris, Duomen� bazi�"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Ar tu nori i�bandyti nustatymus?"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedija - Garsas"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Priemon�s"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacija"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsol�s �rankiai"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Interneto stotis"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedija stotis"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN Konfiguravimas"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Daugiau grafini� darbalauki� (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment, pagrindin� grafin� aplinka su dideliu rinkiniu "
-"pritaikyt� program�"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "�rankiai kurti ir kepti CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Biuro darbo stotis"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "serveris"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm ir Pan."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafikos programos, tokios kaip The GIMP"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C bei C++ k�rimo bibliotekos, programos ir include bylos"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Serveris, Tinklo Kompiuterio serveris"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Serveris, Pa�to/Grupinio darbo/Naujien�"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "�aidim� stotis"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Vaizdo grotuvai ir redaktoriai"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedija - grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-"Programos pasilinksminimui: lentos, strateginiai, kort� �aidimai ir pan."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Rinkinys �ranki� skaityti ir si�sti pa�t� bei naujienas (pine, mutt, tin) ir "
-"nar�yti �iniatinkl� (WWW)"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archyvavimas, emuliatoriai, steb�jimas"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Asmeniniai finansai"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafin� aplinka su vartotojui draugi�k� program� ir darbalaukio �ranki� "
-"rinkiniu"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Pri�jimas prie Interneto"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Garso ir vaizdo grojimo/redagavimo programos"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Kiti grafiniai darbalaukiai"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redaktoriai, shell'ai, byl� �rankiai, terminalai"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programos, skirtos tvarkyti tavo finansus, pvz. gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Asmenin�s informacijos tvarkykl� (PIM)"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedija - CD kepimas"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Mokslin�s darbo stotis"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Nutraukti"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Jokia"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Pasirink �prast� vartotoj�:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Nutol�s spausdintuvas"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Dabar tu gali nurodyti parinktis moduliui %s."
-
-#~ msgid "Low"
-#~ msgstr "�emas"
-
-#~ msgid "Medium"
-#~ msgstr "Vidutinis"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr "�iame saugumo lygyje yra daugiau persp�jim� ir saugumo patikrinim�."
-
-#~ msgid "mount failed"
-#~ msgstr "primontuoti nepavyko"
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Multimedija"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Eksperto"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux tvarko laik� pagal GMT (Greenwich Mean Time),\n"
-#~ "ir paver�ia j� � vietin� laik� pagal tavo pasirinkt� laiko juost�."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Prisijungti prie interneto"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Atsijungti nuo interneto"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Nustatyti tinklo jungt� (LAN arba interneto)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "� kur� disk� tu nori j� perkelti?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Pasirink paketus, kuriuos tu nori �diegti."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Info"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome darbo stotis"
-
-#, fuzzy
-#~ msgid "user"
-#~ msgstr "Vartotojas: "
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Pra�om pasirinkti savo pel�s r���."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "I�eiti"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "I�imam� laikmen� automatinis montavimas"
-
-#~ msgid "Active"
-#~ msgstr "Aktyvus"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Ne"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "\"%s\" modelio spausdintuvas buvo aptiktas prie "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Vietinio spausdintuvo jungtis"
-
-#~ msgid "Printer Device"
-#~ msgstr "Spausdintuvo �renginys"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Nutol�s CUPS serveris"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Nutol�s CUPS serveris"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Sistemos re�imas"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Kitas"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Pra�om pasirinkti klaviat�ros i�d�stym�."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Pra�om spragtel�ti ant skirsnio"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tipas: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Bloga atsargin� byla"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Nustatyti X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Spausdintuvo �renginys"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Nutraukti"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Gerai"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Pel�"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "toot"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "I�bandoma jungtis..."
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "I�bandoma jungtis..."
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "Sistema dabar prijungta prie interneto."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Pasirink dyd�, kiek nori visko �diegti"
-
-#~ msgid "Total size: "
-#~ msgstr "Bendras dydis: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Pra�om palaukti, "
-
-#~ msgid "Total time "
-#~ msgstr "Bendra trukm� "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Naudoti esamus X11 nustatymus?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Prie kurio �renginio yra prijungtas tavo spausdintuvas\n"
-#~ "(atmink, kad /dev/lp0 yra LPT1 ekvivalentas)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#, fuzzy
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "�sp�ju, �i tinklo plok�t� jau buvo sutvarkyta.\n"
-#~ "Ar nor�tum nustatyti j� i� naujo?"
-
-#~ msgid "New"
-#~ msgstr "Naujas"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "I�mesti"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Pra�om spragtel�ti ant skirsnio"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Dviprasmi�kumas (%s), b�k tikslesnis\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (pagal nutyl�jim� %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr ""
-#~ "Tavo pasirinkimas? (pagal nutyl�jim� %s, �vesk `none' jei nieko nenori) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "negaliu atidaryti /etc/sysconfig/autologin skaitymui: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Ar tu nori i� naujo paleisti tinkl�"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Ar tu sutinki?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Ruo�iamasi i� naujo paleisti tinklo �rengin�:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Ruo�iamasi i� naujo �jungti tinklo �rengin� %s. Ar tu sutinki?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Nebent tu tiksliai �inai kit� variant�, �prastas pasirinkimas b�na \"/dev/"
-#~ "hda\"\n"
-#~ "(tai yra pirminis pagrindinis IDE kaupiklis) arba \"/dev/sda\" (pirmas "
-#~ "SCSI diskas)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Jungties tipas: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Pasirink �prast� vartotoj�:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Pra�om i�bandyti pel�"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Pasirink norim� kalb� �diegimui ir sistemos vartojimui"
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Tu turi sutikti su auk��iau esan�ios licenzijos s�lygomis, kad t�stum "
-#~ "�diegim�.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pra�om spausti �Sutinku�, jei sutinki su jos s�lygomis.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pra�om spausti �Atmetu�, jei nesutinki su jos s�lygomis.\n"
-#~ "�diegimas bus nutrauktas, nekei�iant esamos konfig�racijos."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Pasirink norim� klaviat�ros i�d�stym� i� s�ra�o auk��iau"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Jei nori, kad kitos kalbos (be tos, kuri� nurodei �diegimo prad�ioje)\n"
-#~ "b�t� prieinamos �diegus sistem�, pasirink jas i� auk��iau esan�io\n"
-#~ "s�ra�o. Jei nori vis�, tiesiog spausk �Visos�."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Pasirink:\n"
-#~ "\n"
-#~ "  - Prisitaikyta: Jeigu esi pakankamai pa��stamas su GNU/Linux, gal�si "
-#~ "pasirinkti pagrindin� sistemos paskirt�. �i�r�k �emiau d�l smulkmen�.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Eksperto: Jeigu tau puikiai sekasi su GNU/Linux, ir nori smarkiai "
-#~ "prisitaikyti \n"
-#~ "    �diegim�. Kaip ir �Prisitaikytoje� klas�je, tu gal�si pasirinkti "
-#~ "pagrindin� \n"
-#~ "    sistemos paskirt�. Bet, labai pra�au, NESIRINK �ITO, NEBENT TIKRAI "
-#~ "�INAI, K� DARAI!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Tu turi apibr��ti, kam ma�ina bus naudojama. Pasirinkimai yra:\n"
-#~ "\n"
-#~ "* Darbo stotis: tai geriausias pasirinkimas, jei ruo�iesi ma�in� naudoti "
-#~ "daugiausiai kasdieniams darbams,\n"
-#~ "  �staigoje ar namie.\n"
-#~ "\n"
-#~ "\n"
-#~ "* K�rimo: jei ruo�iesi �i� ma�in� naudoti daugiausiai programin�s �rangos "
-#~ "k�rimui, tai geras pasirinkimas. Tu\n"
-#~ "  tada tur�si �diegt� piln� rinkin� program�, skirt� kompiliuoti, derinti "
-#~ "ir formatuoti i�eities tekstus, bei kurti\n"
-#~ "  program� paketus.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Serveris: jei ruo�iesi naudoti �i� ma�in� naudoti kaip server�, tai "
-#~ "geras pasirinkimas. Tiek byl� server�\n"
-#~ "  (NFS arba SMB), tiek spausdinimo server� (Unix ar Microsoft Windows "
-#~ "stiliaus), autentikacijos (NIS),\n"
-#~ "  duomen� baz�s server� ir pan. Jei taip, nesitik�k, kad bus �diegti "
-#~ "visokie gra�umai (KDE, GNOME. etc.)"
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Tu dabar gali pasirinkti grup� paket�, kuriuos nori �diegti\n"
-#~ "ar atnaujinti.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX tada patikrins, ar yra pakankamai vietos �diegti juos visus. Jei "
-#~ "ne,\n"
-#~ "persp�s tave apie tai. Jei vis tiek nor�si t�sti, pasirinkt� grupi� "
-#~ "�diegimas\n"
-#~ "bus prat�stas, ta�iau kai kurie ma�iau naudingi paketai bus i�mesti. "
-#~ "S�ra�o\n"
-#~ "pabaigoje tu gali pasirinkti variant� \"Atskir� paket� pasirinkimas\", "
-#~ "tuo atveju\n"
-#~ "tu gal�si nar�yti po daugiau nei 1000 paket� ir pasirinkti juos po "
-#~ "vien�..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Dabar tu gali pasirinkti po vien� paketus, kuriuos\n"
-#~ "nori �diegti\n"
-#~ "\n"
-#~ "\n"
-#~ "Tu gali i�skleisti ir suskleisti med�, spragtel�damas mygtukus "
-#~ "kairiajame\n"
-#~ "apatiniame paket� lango kampe.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei labiau nor�tum matyti paketus surikiuotus pagal ab�c�l�, spragtel�k "
-#~ "ant\n"
-#~ "ikonos \"Perjungti tarp rikiavimo pagal grupes ar ab�c�l�\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei nenori, kad tave �sp�t� apie priklausomybes, spragtel�k ant\n"
-#~ "\"Tyliai patenkinti priklausomybes\". Jei taip padarysi, nepamir�k, kad "
-#~ "at�ym�jus\n"
-#~ "vien� paket�, gali b�ti at�ym�ti keletas kit�, kurie nuo jo priklauso."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Jei turi visus CD i� auk��iau esan�io s�ra�o, spausk Gerai.\n"
-#~ "Jei neturi n� vieno i� �i� CD, spausk Nutraukti.\n"
-#~ "Jei tr�ksta tik kai kuri� CD, at�ym�k juos ir tada spausk Gerai."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Jei tu nori prijungti savo kompiuter� prie interneto arba\n"
-#~ "vietinio tinklo, pasirink teising� variant�. Pra�om �jungti �rengin� "
-#~ "prie�\n"
-#~ "pasirenkant teising� variant� -- tai leis DrakX automati�kai j� "
-#~ "atpa�inti.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei tu neturi galimyb�s prisijungti nei prie interneto, nei prie vietinio "
-#~ "tinklo,\n"
-#~ "rinkis \"I�jungti tinkl�\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei nori sutvarkyti tinkl� v�liau, baigus �diegim�, arba jei jau baigei\n"
-#~ "konfig�ruoti savo tinklo jungtis, rinkis \"Atlikta\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Nebuvo aptiktas joks modemas. Pra�om pasirinkti nuosekl�j� prievad�,\n"
-#~ "prie kurio jis yra prijungtas.\n"
-#~ "\n"
-#~ "�inok, kad pirmasis nuoseklusis prievadas (COM1 MS Windows'uose)\n"
-#~ "vadinamas ttyS0 Linux'e."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Tu dabar gali �vesti prisiskambinimo nuostatas. Jei tu\n"
-#~ "ne�inai arba nesi tikras, k� �vesti, teising� informacij� gali gauti i� "
-#~ "savo\n"
-#~ "Interneto paslaug� tiek�jo (IPT). Jei tu ne�vesi DNS (vard� serverio)\n"
-#~ "informacijos �ia, ji bus gauta i� Interneto paslaug� tiek�jo jungimosi "
-#~ "metu."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Jei tavo modemas yra i�orinis, pra�om �jungti j� dabar, kad DrakX gal�t� "
-#~ "atpa�inti j� automati�kai."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Pra�au, �junk savo modem� ir pasirink teising�."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Jei tu nesi tikras, ar auk��iau pateikta informacija yra teisinga,\n"
-#~ "arba tiksliai ne�inai, k� �vesti, teising� informacij� gali gauti i� "
-#~ "savo\n"
-#~ "Interneto paslaug� tiek�jo (IPT). Jei tu ne�vesi DNS (vard� serverio)\n"
-#~ "informacijos �ia, ji bus gauta i� Interneto paslaug� tiek�jo jungimosi "
-#~ "metu."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Tu dabar gali �vesti savo hosto vard�, jei to reikia. Jei tu\n"
-#~ "ne�inai arba nesi tikras, k� �vesti, teising� informacij� gali gauti i� "
-#~ "savo\n"
-#~ "Interneto paslaug� tiek�jo (IPT)."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Tu dabar gali sutvarkyti savo tinklo �rengin�:\n"
-#~ "\n"
-#~ "   * IP adresas: jeigu jo ne�inai, arba nesi tikras k� �vesti, pasiklausk "
-#~ "savo tinklo administratoriaus.\n"
-#~ "     Tu tur�tum ne�vesti IP adreso, jei pasirenki \"Automatinis IP\" "
-#~ "�emiau.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" da�niausiai yra neblogas pasirinkimas. "
-#~ "Jeigu ne�inai, arba nesi tikras\n"
-#~ "     k� �vesti, pasiklausk savo tinklo administratoriaus.\n"
-#~ "\n"
-#~ "   * Automatinis IP: Jeigu tavo tinkle naudojamas BOOTP ar DHCP "
-#~ "protokolas, pasirink �� variant�.\n"
-#~ "     Jeigu pasirinksi j�, nereik�s nieko �ra�yti prie \"IP adreso\". "
-#~ "Jeigu tu ne�inai, arba nesi tikras, ar reikia\n"
-#~ "     pasirinkti �� variant�, pasiklausk tinklo administratoriaus."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Tu dabar gali �vesti savo hosto vard�. Jeigu jo ne�inai,\n"
-#~ "arba nesi tikras k� �vesti, pasiklausk savo tinklo administratoriaus."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Tu dabar gali �vesti savo hosto vard�, jei to reikia. Jei tu ne�inai\n"
-#~ "arba nesi tikras, k� �vesti, palik tu��ia."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Dabar tu gali �vesti prisiskambinimo nuostatas. Jeigu tu gerai ne�inai,\n"
-#~ "k� �ra�yti, teising� informacij� gali gauti i� savo ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Jeigu tu naudosi proxy, pra�om dabar juos nustatyti. Jeigu tu dar "
-#~ "ne�inai,\n"
-#~ "ar tur�tum naudoti proxy, pasiklausk tinklo administratoriaus arba ISP."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Dabar tu gali �diegti kriptografijos paket�, jeigu tavo interneto juntis "
-#~ "buvo\n"
-#~ "gerai sutvarkyta. Prad�iai pasirink atvaizd� (mirror), i� kurio parsi�sti "
-#~ "paketus,\n"
-#~ "o po to pa�ym�k, kuriuos paketus �diegti.\n"
-#~ "\n"
-#~ "Atmink, kad tu turi pasirinkti atvaizd� ir kriptografijos paketus, "
-#~ "atitinkan�ius\n"
-#~ "�statym� reikalavimus."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr ""
-#~ "Tu dabar gali pasirinkti laiko juost�, priklausomai nuo to, kur gyveni."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Tu gali sukonfig�ruoti vietin� spausdintuv� (prijungt� prie tavo "
-#~ "kompiuterio) arba\n"
-#~ "nutolus� spausdintuv� (prieinam� per Unix, Netware arba Microsoft Windows "
-#~ "tinkl�)"
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "jei tu nori spausdinimo galimyb�s, pra�om dabar pasirinkti vien� "
-#~ "spausdinimo\n"
-#~ "sistem� i� CUPS ir LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS yra nauja, galinga ir lanksti spausdinimo sistema Unix sistemoms "
-#~ "(CUPS\n"
-#~ "rei�kia \"Common Unix Printing System\"). Tai yra spausdinimo sistema,\n"
-#~ "Mandrake Linux parenkama pagal nutyl�jim�.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR yra sena spausdinimo sistema, naudota ankstesn�se Mandrake Linux\n"
-#~ "versijose.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei tu neturi spausdintuvo, pasirink \"Jokia\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux gali susitvarkyti su dauguma spausdintuv� tip�. Kiekvienas i�\n"
-#~ "�i� tip� reikalauja skirtingo nustatymo.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei tavo spausdintuvas yra fizi�kai prijungtas prie tavo kompiuterio,\n"
-#~ "pasirink \"Vietinis spausdintuvas\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei nori prieiti prie spausdintuvo, kuris yra nutolusioje Unix "
-#~ "sistemoje,\n"
-#~ "pasirink \"Nutol�s spausdintuvas\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei nori prieiti prie spausdintuvo, kuris yra nutolusiame Microsoft "
-#~ "Windows\n"
-#~ "kompiuteryje (arba Unix kompiuteryje, naudojan�iame SMB protokol�), "
-#~ "pasirink\n"
-#~ "\"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Pra�au, �junk savo spausdintuv� prie� leisdamas DrakX j� atpa�inti.\n"
-#~ "\n"
-#~ "Tu dabar turi �vesti �iek tiek informacijos.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Spausdintuvo vardas: spausdinimo kaupykla (spooler) naudoja \"lp\" "
-#~ "kaip �prast� spausdintuvo vard�. Taigi,\n"
-#~ "     tu turi tur�ti spausdintuv�, pavadint� \"lp\". Jei turi tik vien� "
-#~ "spausdintuv�, gali jam parinkti kelet� vard�. Tu \n"
-#~ "     tiesiog turi atskirti juos sta�iu br�k�niu (\"|\"). Taigi, jei "
-#~ "patikt� prasmingesnis vardas, tu turi j� �ra�yti pirm�,\n"
-#~ "     pvz. \"Mano spausdintuvas|lp\". Spausdintuvas, kurio varde yra \"lp"
-#~ "\", bus parenkamas pagal nutyl�jim�.\n"
-#~ "\n"
-#~ "\n"
-#~ "  � * Apra�ymas: jis neb�tinas, bet gali b�ti naudingas, jei prie "
-#~ "kompiuterio yra prijungti keli spausdintuvai arba\n"
-#~ "     leid�iama kitiems kompiuteriams prieiti prie �io spausdintuvo.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Vieta: jei nori �ra�yti �iek tiek informacijos apie tai, kur tas "
-#~ "spausdintuvas yra, �ra�yk j� �ia (gali ra�yt\n"
-#~ "     k� tik nori, pavyzd�iui \"ant boso stalo\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Tu dabar turi �vesti �iek tiek informacijos.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Spausdintuvo vardas: spausdinimo kaupykla (spooler) naudoja \"lp\" "
-#~ "kaip �prast� spausdintuvo vard�.\n"
-#~ "     Taigi, tu turi tur�ti spausdintuv�, pavadint� \"lp\". Jei turi tik "
-#~ "vien� spausdintuv�, gali jam parinkti kelet�\n"
-#~ "     vard�. Tu tiesiog turi atskirti juos sta�iu br�k�niu (\"|\"). Taigi, "
-#~ "jei patikt� prasmingesnis vardas, tu turi j�\n"
-#~ "     �ra�yti pirm�, pvz. \"Mano spausdintuvas|lp\". Spausdintuvas, kurio "
-#~ "varde yra \"lp\", bus parenkamas\n"
-#~ "     pagal nutyl�jim�.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Kaupimo (spool) katalogas: tai katalogas, � kur� �ra�omi spausdinimo "
-#~ "darbai. Palik �prast� parinkt�,\n"
-#~ "     jeigu ne�inai k� naudoti.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Spausdintuvo jungtis: jei tavo spausdintuvas yra fizi�kai prijungtas "
-#~ "prie tavo kompiuterio, rinkis\n"
-#~ "     \"Vietinis spausdintuvas\". Jie nori prieiti prie spausdintuvo, "
-#~ "prijungto prie nutolusio Unix kompiuterio,\n"
-#~ "     pasirink \"Nutol�s lpd spausdintuvas\".\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "     Jei nori prieiti prie spausdintuvo, kuris yra nutolusiame Microsoft "
-#~ "Windows kompiuteryje (arba\n"
-#~ "     Unix kompiuteryje, naudojan�iame SMB protokol�), pasirink \"SMB/"
-#~ "Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Jie nori prieiti prie spausdintuvo, esan�io Netware tinkle, pasirink "
-#~ "\"Netware\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Tavo spausdintuvas nebuvo atpa�intas. Pra�om �vesti pavadinim� "
-#~ "�renginio,\n"
-#~ "prie kurio jis yra prijungtas.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tavo �iniai, dauguma spausdintuv� b�na prijungti prie pirmos "
-#~ "lygiagre�iosios jungties.\n"
-#~ "Tai vadinama \"/dev/lp0\" GNU/Linux sistemose, ir \"LPT1\" Microsoft "
-#~ "Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Tu dabar turi pasirinkti savo spausdintuv� i� s�ra�o auk��iau."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Pra�om pasirinkti teisingas nuostatas, priklausomai nuo spausdintuvo.\n"
-#~ "Pasi�i�r�k � dokumentacij�, jeigu ne�inai, k� �ia �vesti.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tu gal�si i�bandyti nustatymus sekan�iame �ingsnyje, ir sugr���s v�l juos "
-#~ "pakeisti,\n"
-#~ "jeigu neveikia taip, kaip tu nor�tum."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Dabar tu gali �vesti savo Mandrake Linux sistemos root slapta�od�.\n"
-#~ "Slapta�odis turi b�ti �vestas du kartus patikrinimui, kad abu �ra�ai "
-#~ "sutampa.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root yra sistemos administratorius ir vienintelis vartotojas, kuriam "
-#~ "leid�iama\n"
-#~ "konfig�ruoti sistem�. Taigi, slapta�od� pasirink atsargiai. Neteis�tas "
-#~ "root\n"
-#~ "vartojimas gali b�ti ypatingai pavojingas �iai sistemai, duomenims joje "
-#~ "ir kitoms,\n"
-#~ " su ja susijusioms sistemoms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Slapta�odis turi b�ti raid�i� ir skai�i� mi�inys, ma�iausiai 8 simboli�\n"
-#~ "ilgio. Jis tur�t� niekada neb�ti u�ra�ytas ant popieriaus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nepasidaryk slapta�od�io pernelyg ilgo ir sud�tingo: tu tur�tum j� "
-#~ "prisiminti\n"
-#~ "be ypating� pastang�."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Dabar tu gali sukurti vien� arba daugiau \"paprast�\" vartotoj�.\n"
-#~ "Kiekvienam �mogui, kuriam tu nori leisti naudotis �iuo kompiuteriu,\n"
-#~ "tu gali sukurti vien� ar daugiau s�skait� (account). Atmink, kad\n"
-#~ "kiekvienas vartotojas tur�s savus nustatymus (grafin�s aplinkos,\n"
-#~ "program� nuostatas, ir t.t. ), bei savo \"nam� katalog�\", kuriame\n"
-#~ "tie nustatymai bus laikomi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pirmiausia, sukurk vartotoj� sau pa�iam! Net jeigu tu b�si vienintelis "
-#~ "�io\n"
-#~ "kompiuterio vartotojas, tu NEGALI prisijungti kaip root vartotojas "
-#~ "sistemos\n"
-#~ "kasdieniam naudojimui: taip i�kilt� didel� saugumo gr�sm�. Kad padarytum\n"
-#~ "sistem� nebe�manom� naudoti, u�tenka padaryti por� klaid�.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tod�l, tu tur�tum prisijungti prie sistemos, naudodamasis vartotojo "
-#~ "s�skaita,\n"
-#~ "kuri� b�si �ia suk�r�s, o pasisveikinti kaip root tik administravimo ar\n"
-#~ "prie�i�ros darbams."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Sukurti �krovos diskel� labai rekomenduojama. Jei tau nepavykt�\n"
-#~ "�krauti kompiuterio, tai vienintelis b�das i�gelb�ti sistem� jos\n"
-#~ "nediegiant i� naujo."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Pagrindin�s LILO bei GRUB nuostatos yra �ios:\n"
-#~ "  - �krovos �renginys: Nurodo �rengin� (pvz. disko skirsn�), kuriame\n"
-#~ "yra �krovos sektorius. Pasirink \"/dev/hda\", nebent �inai tiksliai "
-#~ "kitaip.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauz� prie� �keliant �prast� atvaizd� (image): Nurodo de�imt�j�\n"
-#~ "sekund�s dali� kiek�, kiek reikia palaukti, prie� paleid�iant pirm� "
-#~ "atvaizd�.\n"
-#~ "Tai naudinga sistemoms, kurios kraunasi i�kart po klaviat�ros �jungimo.\n"
-#~ "�krovos tvarkykl� nelaukia, jeigu \"pauz�\" yra nenurodyta arba lygi "
-#~ "nuliui.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Vaizdo re�imas: Tai nurodo  VGA re�im�, pasirenkam� paleid�iant.\n"
-#~ "Yra galimos �ios reik�m�s:\n"
-#~ "\n"
-#~ "    * normal: pasirinkti standartin� 80x25 tekstin� re�im�.\n"
-#~ "\n"
-#~ "    * <skai�ius>: naudoti atitinkam� tekstin� re�im�."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO yra �krovos tvarkykl� SPARC'ams: ji gali �krauti\n"
-#~ "tiek GNU/Linux, tiek bet koki� kit� operacij� sistem�, esan�i�\n"
-#~ "kompiuteryje. Paprastai tos kitos operacij� sistemos yra teisingai\n"
-#~ "atpa��stamos ir �diegiamos. Jeigu ne, tu gali prid�ti �ra�us pats �iame\n"
-#~ "lange. B�k atidus ir pasirink teisingus parametrus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tu taip pat gali u�drausti pri�jim� prie t� kit� operacij� sistem�\n"
-#~ "bet kam, jei i�trinsi atitinkamus �ra�us. Bet tuo atveju, tau prireiks\n"
-#~ "�krovos diskelio, kad jas �krautum!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Pagrindin�s SILO nuostatos yra �ios:\n"
-#~ "  - �krovos tvarkykl�s �diegimas: Parodo, kur tu nori pad�ti "
-#~ "informacij�,\n"
-#~ "reikaling� �krauti GNU/Linux. Pasirink \"Pirmasis kaupiklio sektorius "
-#~ "(MBR)\",\n"
-#~ "nebent �inai tiksliai kitaip.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauz� prie� �keliant �prast� atvaizd� (image): Nurodo de�imt�j�\n"
-#~ "sekund�s dali� kiek�, kiek reikia palaukti, prie� paleid�iant pirm� "
-#~ "atvaizd�.\n"
-#~ "Tai naudinga sistemoms, kurios kraunasi i�kart po klaviat�ros �jungimo.\n"
-#~ "�krovos tvarkykl� nelaukia, jeigu \"pauz�\" yra nenurodyta arba lygi "
-#~ "nuliui."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "At�jo laikas sukonfig�ruoti X Window sistem�, kuri yra GNU/Linux GUI\n"
-#~ "(Grafin�s vartotojo s�sajos) pagrindas. Kad tai padarytum, tau\n"
-#~ "reikia sukonfig�ruoti vaizdo plok�t� bei monitori�. Dauguma �ingsni�\n"
-#~ "yra automatizuoti, ir tavo darbas gal b�t bus tik patikrinti, kas buvo\n"
-#~ "atlikta, ir pritarti nuostatoms :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kai konfig�ravimas bus baigtas, bus paleisti X'ai (nebent papra�ysi\n"
-#~ "DrakX, kad to nedaryt�) tam, kad gal�tum patikrinti ir pamatytum,\n"
-#~ "ar nuostatos tau tinka. Jeigu ne, tu gali sugr��ti ir pakeisti jas,\n"
-#~ "tiek kart�, kiek reik�s."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Jeigu kas nors su X konfig�racija yra netvarkoje, naudok �ias parinktis\n"
-#~ "teisingai nustatyti X Window sistemai."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Jeigu tu nori pasisveikinti grafiniam re�ime, pasirink \"Taip\".\n"
-#~ "Kitu atveju rinkis \"Ne\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Tavo sistem� ruo�iamasi perkrauti.\n"
-#~ "\n"
-#~ "Po perkrovimo tavo naujoji Mandrake Linux sistema bus �krauta\n"
-#~ "automati�kai. Jeigu nori pakrauti kit� operacij� sistem�, pra�om\n"
-#~ "perskaityti papildomas instrukcijas."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "�ek� (Programuotojo)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovak� (Programuotojo)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Kuriamo profailo vardas:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "�ra�yti /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Su�ym�ti visus skirsnius"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Su�ym�jus visus skirsnius,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "visi duomenys, esantys �iuose skirsniuose, bus prarasti"
-
-#~ msgid "Reload"
-#~ msgstr "V�l �kelti"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Ar tu nori sukurti automatinio �diegimo diskel� Linux dauginimui?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL nustatymas"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Su nutolusiu CUPS serveriu, tau �ioje vietoje nereikia nustatin�ti\n"
-#~ "joki� spausdintuv�; jie bus automati�kai atpa��stami,\n"
-#~ "nebent tu turi server�, kuris yra kitame tinkle; tuomet turi �ra�yti\n"
-#~ "CUPS serverio IP adres� ir galb�t  prievado numer�."
-
-#~ msgid "Remote queue"
-#~ msgstr "Nutolusi eil�"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Nutolusi eil�"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Domeno vardas"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Spausdintuvo n�ra"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Tinklo konfig�ravimas"
-
-#~ msgid "Profile "
-#~ msgstr "Profailas "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Jungties tipas: "
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Prisijungti prie interneto"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Atsijungti nuo interneto"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Atsijungti nuo interneto"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Atsijungti nuo interneto"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Jungties pavadinimas"
-
-#, fuzzy
-#~ msgid "average"
-#~ msgstr "i�kraipymai"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "�prastas"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Nuostat� bylos turinio nepavyko suprasti."
-
-#~ msgid "Adapter"
-#~ msgstr "Adapteris"
-
-#~ msgid "Disable network"
-#~ msgstr "U�drausti tinkl�"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "U�drausti tinkl�"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Tu dabar gali i�bandyti savo pel�. Naudok klavi�us ir ratuk�,\n"
-#~ "kad patikrintum ar nuostatos geros. Jei ne, spausk �Nutraukti�\n"
-#~ "ir pasirink kit� tvarkykl�."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (arba ADSL) jungtis"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Pel�"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Tu gali tiesiog �ra�yti URI, kad prieitum prie spausdintuvo su CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Taip, spausdinti ASCII bandom�j� puslap�"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Taip, spausdinti PostScript bandom�j� puslap�"
-
-#~ msgid "Paper Size"
-#~ msgstr "Lapo dydis"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Ar i�stumti lap� po darbo?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint tvarkykl�s nuostatos"
-
-#~ msgid "Color depth options"
-#~ msgstr "Spalv� gylio nuostatos"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Spausdinti tekst� kaip PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Taisyti stair-stepping tekst�?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Puslapi� skai�ius vienam i�vesties puslapiui"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Kairysis/De�inysis kra�tai ta�kais (1/72 colio)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Vir�utinis/Apatinis kra�tas ta�kais (1/72 colio)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Papildomos GhostScript nuostatos"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Papildomos teksto nuostatos"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Atbulin� puslapi� seka"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Pasirink nutolusio spausdintuvo jungt�"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Kiekviena spausdinimo eil� turi tur�ti pavadinim� (pavyzd�iui, lp).\n"
-#~ "Gali b�ti nurodyti kiti parametrai, tokie kaip spausdintuvo apra�ymas\n"
-#~ "ar jo vieta. Koks �io spausdintuvo vardas ir kaip jis yra prijungtas?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Kiekviena spausdinimo eil� (� kuri� nukreipiami spaudiniai) turi tur�ti\n"
-#~ "pavadinim� (da�niausiai lp) ir kaupimo katalog�, susiet� su ja. Koks "
-#~ "pavadinimas\n"
-#~ "bei katalogas tur�t� b�ti naudojami �iai eilei, ir kaip yra prijungtas "
-#~ "spausdintuvas?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Eil�s pavadinimas"
-
-#~ msgid "Spool directory"
-#~ msgstr "Kaupimo katalogas"
-
-#~ msgid "Disable"
-#~ msgstr "I�jungti"
-
-#~ msgid "Enable"
-#~ msgstr "�jungti"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Nor�damas padaryti sistem� saugesne, pasirink \"Naudoti �e��lin� byl�\" "
-#~ "ir\n"
-#~ "\"Naudoti MD5 slapta�od�ius\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Jeigu tavo tinklas naudoja NIS, pasirink \"Naudoti NIS\". Jeigu\n"
-#~ "ne�inai, paklausk tinklo administratoriaus."
-
-#~ msgid "yellow pages"
-#~ msgstr "geltonieji puslapiai"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "LAN konfiguravimas"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Tiek�jo DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Tiek�jo DNS 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Kaip tu nori prisijungti prie interneto?"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Pasirink byl�"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "I�bandoma jungtis..."
-
-#~ msgid "Configure..."
-#~ msgstr "Konfig�ruojama..."
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Nustatymai: Prid�ti suradimo viet�"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "�is paleidimo skriptas bando �kelti tavo USB pel�s modulius."
-
-#~ msgid "Boot style configuration"
-#~ msgstr "�krovos stiliaus konfig�racija"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Dabar, kai prisijungimas prie interneto yra sukonfig�ruotas,\n"
-#~ "tavo kompiuteris gali b�ti sutvarkytas dalintis �ia interneto jungtimi.\n"
-#~ "Pastaba: reikia tur�ti atskir� tinklo plok�t�, per kuri� b�t� prijungtas\n"
-#~ "vietinis tinklas (LAN).\n"
-#~ "\n"
-#~ "Ar nor�tum sutvarkyti interneto jungties dalinim�si?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Tyliai patenkinti priklausomybes"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Nustatyti LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Sukurti �krovos diskel�"
-
-#~ msgid "Choice"
-#~ msgstr "Pasirinkimas"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horizontali gra�iai atrodanti aurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "vertikali tradicin� aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitorius"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Dabar tu gali pasirinkti �vairias savo sistemos nuostatas.\n"
-#~ "\n"
-#~ "* Naudoti diskinio kaupiklio optimizacijas: �i nuostata gali padidinti "
-#~ "kietojo disko spart�, bet\n"
-#~ "skirta naudoti tik\n"
-#~ "  patyrusiems vartotojams. kai kurie lustai su klaidomis gali sugadinti "
-#~ "tavo duomenis, taigi b�k atsargus.\n"
-#~ "  Branduolys turi s�ra�� blog� �rengini�, ta�iau jei nori i�vengti "
-#~ "nemaloni� siurpriz�, palik �i� nuostat� i�jungt�.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Pasirinkti saugumo lyg�: tu gali pasirinkti sistemos saugumo lyg�.\n"
-#~ "  Pla�iau apie tai skaityk pateiktuose apra�ymuose. Papras�iausiai, jei "
-#~ "ne�inai k� pasirinkti, palik\n"
-#~ "  �prast� variant�.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Tikslus RAM atminties kiekis: deja, n�ra standartinio b�do, kaip "
-#~ "u�klausti BIOS, kiek kompiuteryje yra RAM atminties.\n"
-#~ "  D�l �ios prie�asties, Linux'ui gali nepavykti atpa�inti tikslaus RAM "
-#~ "kiekio. Tokiu atveju tau reikia\n"
-#~ "  nurodyti teising� jos kiek�. Atmink, kad 2 ar 4 MB skirtumas tarp "
-#~ "atpa�intos ir esamos atminties yra normalus.\n"
-#~ "\n"
-#~ "\n"
-#~ "* I�imam� laikmen� automatinis montavimas: jeigu tu nenori montuoti "
-#~ "i�imam� laikmen� (CD, diskeli�, Zip ir pan.)\n"
-#~ "  rankiniu b�du, ra�ydamas \"mount\" ir \"umount\" pa�ym�k �i� parinkt�.\n"
-#~ "\n"
-#~ "\n"
-#~ "* I�valyti \"/tmp\", kiekvien� kart� �krovus: jei nori i�trinti visas "
-#~ "bylas ir katalogus, esan�ius \"/tmp\", �krovos metu,\n"
-#~ "  pa�ym�k �i� parinkt�.\n"
-#~ "\n"
-#~ "\n"
-#~ "* �krovos metu �jungti Num Lock: jei nori, kad NumLock b�t� �jungtas "
-#~ "�sikrovus sistemai, pa�ym�k �i� parinkt�.\n"
-#~ "  Atkreipk d�mes� � tai, kad netur�tum to �jungti ne�iojamuose "
-#~ "kompiuteriuose, ir kad X'uose NumLock gali veikti arba neveikti."
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr "Atleiskite, bet pa�to konfiguracija dar nepadaryta. B�kite kantr�s."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Sveiki atvyk� pas Tinklo Konfiguravimo Meistr�.\n"
-#~ "Kokius komponentus norite konfiguruoti?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Internet/Tinklo pri�jimas"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "�vair�s"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "�vair�s klausimai"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Negalima naudoti supermount su auk�tu saugumo lygiu"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "d�mesio: �IAME SAUGUMO LYGYJE, ROOT'ui NELEID�IAMA PASISVEIKINTI "
-#~ "KONSOL�JE!\n"
-#~ "jei nori tapti root, turi pasisveikinti kaip vartotojas, o tada naudoti "
-#~ "�su�.\n"
-#~ "Bendriau pa�mus, nemanyk savo kompiuterio naudoti kam nors kitam, nebent "
-#~ "serveriui.\n"
-#~ "Tu buvai �sp�tas."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "B�k atsargus, jei numlock bus �jungtas, daugyb� klavi�� gali veikti\n"
-#~ "kaip skai�iai vietoj normali� raid�i� (pvz., paspaudus `p' bus `6')"
-
-#~ msgid "not connected"
-#~ msgstr "nepajungtas"
-
-#, fuzzy
-#~ msgid "Actions"
-#~ msgstr "Vieta"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Mokslin�s programos"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Serveris, Byl�/Spausdinimo/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Serveris, DNS/DHCP "
-
-#~ msgid "First DNS Server"
-#~ msgstr "Pirmasis DNS serveris"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Antrasis DNS serveris"
-
-#~ msgid "using module"
-#~ msgstr "naudojamas modulis"
-
-#~ msgid "Development, Database"
-#~ msgstr "K�rimas, Duomen� baz�s"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "K�rimo, Integruotos Aplinkos"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "K�rimo, Standartin�s priemon�s"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Persp�jimas:\n"
-#~ "Pakeitim� pritaikymas veikiant X gali baigtis avarija."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Jeigu t�site a� i�jungsiu j�s� %s aplink�"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s jau naudojama"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: Tai ne pagrindinis skirsnis, pra�om pasirinkti kit�"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(gali sugadinti duomenis)"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (serijin�)"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI pel�"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Prid�ti paket� suradimo viet�"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Kada %s skirsnis %s, "
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel modemas"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Visos naujai nustatytos sritys norint jas naudoti turi b�ti "
-#~ "suformatuotos\n"
-#~ "(formatavimas rei�ia falin�s sistemos suk�rim�). Dabar j�s gal b�t "
-#~ "norite\n"
-#~ "i�naujo suformatuoti jau formatuotas sritis, kad i�trinti jose esan�ius\n"
-#~ "duomenis. Atminkite kad i�naujo formatuoti jau formatuotas sitis n�ra\n"
-#~ "b�tina, nes jose gali b�ti reikalinga informacija."
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB pel�"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB pel� (2 klavi�ai)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB pel� (3+ klavi�ai)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB pel�"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB pel� (2 klavi�ai)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB pel� (3+ klavi�ai)"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Ar tu tikri, kad esi ekspertas? \n"
-#~ "tau bus leid�iama daryti galingus, bet ir pavojingus dalykus �ia.\n"
-#~ "\n"
-#~ "Tav�s bus klausiama, pvz: �Naudoti �e��lin� byl� slapta�od�iams?�,\n"
-#~ "ar esi pasiruo�� atsakyti � tokius klausimus?"
-
-#~ msgid ""
-#~ "At this point, you need to choose what\n"
-#~ "partition(s) to use to install your new Mandrake Linux system. If "
-#~ "partitions\n"
-#~ "have been already defined (from a previous installation of GNU/Linux or "
-#~ "from\n"
-#~ "another partitioning tool), you can use existing partitions. In other "
-#~ "cases,\n"
-#~ "hard drive partitions must be defined.\n"
-#~ "\n"
-#~ "\n"
-#~ "To create partitions, you must first select a hard drive. You can select "
-#~ "the\n"
-#~ "disk for partitioning by clicking on \"hda\" for the first IDE drive, "
-#~ "\"hdb\" for\n"
-#~ "the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "To partition the selected hard drive, you can use these options:\n"
-#~ "\n"
-#~ "   * Clear all: this option deletes all partitions available on the "
-#~ "selected hard drive.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Auto allocate:: this option allows you to automatically create Ext2 "
-#~ "and swap partitions in free space of your\n"
-#~ "     hard drive.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Rescue partition table: if your partition table is damaged, you can "
-#~ "try to recover it using this option. Please\n"
-#~ "     be careful and remember that it can fail.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Undo: you can use this option to cancel your changes.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Reload: you can use this option if you wish to undo all changes and "
-#~ "load your initial partitions table\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Wizard: If you wish to use a wizard to partition your hard drive, "
-#~ "you can use this option. It is recommended if\n"
-#~ "     you do not have a good knowledge in partitioning.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Restore from floppy: if you have saved your partition table on a "
-#~ "floppy during a previous installation, you can\n"
-#~ "     recover it using this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Save on floppy: if you wish to save your partition table on a floppy "
-#~ "to be able to recover it, you can use this\n"
-#~ "     option. It is strongly recommended to use this option\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Done: when you have finished partitioning your hard drive, use this "
-#~ "option to save your changes.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, you can reach any option using the keyboard: navigate "
-#~ "trough the partitions using Tab and Up/Down arrows.\n"
-#~ "\n"
-#~ "\n"
-#~ "When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "           * Ctrl-c to create a new partition (when a empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "           * Ctrl-d to delete a partition\n"
-#~ "\n"
-#~ "           * Ctrl-m to set the mount point\n"
-#~ "           \n"
-#~ "\n"
-#~ "           \n"
-#~ "If you are installing on a PPC Machine, you will want to create a small "
-#~ "HFS 'bootstrap' partition of at least 1MB for use\n"
-#~ "by the yaboot bootloader. If you opt to make the partition a bit larger, "
-#~ "say 50MB, you may find it a useful place to store \n"
-#~ "a spare kernel and ramdisk image for emgergency boot situations."
-#~ msgstr ""
-#~ "Dabar tu turi pasirinkti, kuriuos skirsnius naudoti tavo naujai Mandrake "
-#~ "Linux \n"
-#~ "sistemai �diegti. Jei skirsniai jau buvo apibr��ti (i� praeito �diegimo "
-#~ "arba kitu dalinimo �rankiu),\n"
-#~ "tu gali naudoti esan�ius skirsnius. Kitu atveju, skirsniai turi b�ti "
-#~ "apibr��ti.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kad sukurtum skirsnius, tu pirmiausia turi pasirinkti kiet�j� disk�. "
-#~ "Disk� dalinimui\n"
-#~ "gali pasirinkti, paspaud�s ant \"hda\" jei nori pirmo IDE kaupiklio, \"hdb"
-#~ "\" -- antro,\n"
-#~ "arba \"sda\", jei renkiesi pirm�j� SCSI kaupikl� ir t.t.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kad sudalintum skirsniais pasirinkt� kiet�j� disk�, gali naudotis vienu "
-#~ "i� �i� variant�:\n"
-#~ "\n"
-#~ "   * I�valyti visk�: �is variantas i�trina visus skirsnius, esan�ius "
-#~ "pasirinktame kietajame diske.\n"
-#~ "\n"
-#~ "\n"
-#~ "  � * Automati�kai paskirti: �is variantas leid�ia automati�kai sukurti "
-#~ "Ext2 bei swap skirsnius laisvoje tavo\n"
-#~ "     disko vietoje.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * I�gelb�ti skirsni� lentel�: jei disko skirsni� lentel� yra "
-#~ "sugadinta, tu gali bandyti atstatyti j� su �iuo variantu.\n"
-#~ "     B�k atsargus ir prisimink, kad tai gali nepavykti.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * At�aukti: tu gali naudoti �� variant�, kad at�auktum visus tavo "
-#~ "pakeitimus.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * I� naujo: tu gali rinktis �� variant�, kad atsisakytum vis� savo "
-#~ "pakeitim� ir �keltum pradin� skirsni� lentel�.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Meistras: jei tu nori, kad meistras tau pad�t� sudalinti kiet�j� "
-#~ "disk�, rinkis �� variant�. Tai rekomenduojama, jeigu\n"
-#~ "     tu nelabai i�manai apie skirsni� dalinim�.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Atkurti i� diskelio: jei tu i�saugojai savo skirsni� lentel� � "
-#~ "diskel� �diegdamas praeit� kart�, tu gali atkurti j�\n"
-#~ "     naudodamasis �iuo variantu.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * I�saugoti � diskel�: jei tu nori i�saugoti savo skirsni� lentel� � "
-#~ "diskel�, kad gal�tum paskui atkurti j�, rinkis ��\n"
-#~ "     variant�. labai rekomenduojama, kad tu tai padarytum.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Atlikta: jei tu baigei dalinti savo kiet�j� disk�, rinkis �� "
-#~ "variant�, kad i�saugotum visus pakeitimus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tavo �iniai, tu gali pasiekti bet kur� variant� naudodamasis klaviat�ra: "
-#~ "vaik��iok tarp skirsni� su Tab bei\n"
-#~ "Auk�tyn/�emyn rodykl�mis.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kai skirsnis yra parinktas, gali naudoti:\n"
-#~ "\n"
-#~ "* Ctrl-c kad sukurtum nauj� skirsn� (jei parinktas tu��ias skirsnis)\n"
-#~ "\n"
-#~ "* Ctrl-d kad i�trintum skirsn�.\n"
-#~ "\n"
-#~ "* Ctrl-m kad nurodytum prijungim� ta�k�."
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Auto �diegimo diskelis"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Automatin� skiriamoji geba"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Automatin� skiriamosios gebos paie�ka"
-
-#~ msgid "Available packages"
-#~ msgstr "Prieinami paketai"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "Bloga kickstart byla %s (nepavyko %s)"
-
-#~ msgid "Cable connecion"
-#~ msgstr "Kabelin� jungtis"
-
-#~ msgid "Category"
-#~ msgstr "Kategorij�"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Pokalbi� (IRC arba instant messaging) programos, kaip xchat, licq, gaim, "
-#~ "ir byl� siuntimo programos"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Tikrinamos priklausomyb�s"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Pasirinkite \"�diegti\" jeigu nebuvo �diegta ankstesni� GNU/Linux "
-#~ "versij�\n"
-#~ "arba j�s norite tur�ti j� kelet�.\n"
-#~ "\n"
-#~ "Pasirinkite \"I�gelb�ti\" jeigu norite i�gelb�ti jau �diegt� Mandrake "
-#~ "Linux \n"
-#~ "\n"
-#~ "\n"
-#~ "Pasirinkite:\n"
-#~ "\n"
-#~ " - Rekomenduojama: Jeigu jums ans�iau n�ra tek� �diegti GNU/Linux.\n"
-#~ "\n"
-#~ " - Vartotoji�ka: Jeigu jau tur�jote reikal� su GNU/Linux. Gal�site "
-#~ "pasirinkti\n"
-#~ "pirmin� kompiuterio funkcij�\n"
-#~ "\n"
-#~ " - Eksperto: Jeigu j�s puikiai sekasi su GNU/Linux i�spr�sti rimtas "
-#~ "u�duotis.\n"
-#~ "Kaip ir konfiguracijoje \"Vartotoji�ka\" j�s gal�site pasirinkti koks "
-#~ "bus\n"
-#~ "�ios sistemos panaudojimas.\n"
-#~ "   Bet Pra�ome, Pra�ome NESIRINKITE TAI, APIE K� J�S NIEKO NE�INOTE!\n"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Pasirinkite \"�diegti\" jeigu nebuvo �diegta ankstesni� Linux versij� "
-#~ "arba\n"
-#~ "j�s norite tur�ti j� kelet�.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pasirinkite \"Atnaujinti\" jeigu norite atnaujinti ankstesnes Mandrake\n"
-#~ "Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus),\n"
-#~ "6.1 (Helios), Gold 2000 arba 7.0 (Air)."
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "�diegti ar atnaujinti"
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Pasirinkite kit� CD �diegimui"
-
-#~ msgid "Collapse all"
-#~ msgstr "I�skleisti visus"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Bendravimo priemon�s"
-
-#~ msgid "Configure local network"
-#~ msgstr "Nustatyti vietin� tinkl�"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Nustatyti interneto jungt� / Nustatyti vietin� tinkl�"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Nurodyti laiko juost�"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Patvirtink slapta�od�"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Kriptografija"
-
-#~ msgid "Customized"
-#~ msgstr "Prisitaikyta"
-
-#~ msgid "Czech"
-#~ msgstr "�ek�"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Duomen� bazi� klientai ir serveriai (mysql bei postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "K�rimas C/C++"
-
-#~ msgid "Directory"
-#~ msgstr "Katalogas"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "U�drausti interneto jungt�"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Ar J�s norite nustatyti savo modemo dialup prisijungim�?"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Ar J�s norite nustatyti savo sistemos vietin� tinkl�?"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Ar norite naudoti LILO?"
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "Parsiun�iami �ifruoti paketai"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "Pirmiausia DrakX pabandys paie�koti PCI ir SCSI �rengini�. Jeigu jis "
-#~ "suras\n"
-#~ "ir �inos kokias tvarkykles jam (jiems) naudoti jis automati�kai jas "
-#~ "�d�s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu j�s� SCSI �renginys yra ISA plok�t� arba DrakX ne�inos kaip j� "
-#~ "valdyti\n"
-#~ "arba j�s i�vis jo neturite jums bus prane�ta. Jeigu j�s neturite, "
-#~ "atsakykite\n"
-#~ "\"Ne\". Jeigu turite vienq arba daugiau atsakykite \"Taip\" ir tvarkykli� "
-#~ "s�ra�as\n"
-#~ "bus jums parodytas\n"
-#~ "\n"
-#~ "\n"
-#~ "Kai j�s pasirinksite tvarkykl�, DrakX papra�ys nurodyti jos nustatymus.\n"
-#~ "Pirmiausia leiskite �rangai pa�iai nusistatyti. Da�nai tai puikiai "
-#~ "suveikia\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu jums nepavyks, nepamir�kite, kad informacijos apie j�s� �rang� "
-#~ "gali\n"
-#~ "suteikti dokumentacija arba Windows (jeigu j�s turite �i� sistem�).\n"
-#~ "Tai tuos nustatymus j�s turite perduoti tvarkyklei."
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI modemas"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Startuojant �jungti Num Lock"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "�d�kite diskel� � kaupikl�, kad sukurti HTP diskel�\n"
-#~ "(Visi duomenys esantys dikelyje bus prarasti)"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Viskas sukonfiguruota.\n"
-
-#~ msgid "Expand all"
-#~ msgstr "I�skleisti visus"
-
-#~ msgid "Find Package"
-#~ msgstr "Rasti paket�"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Rasti byl� su atitinkamu paketu"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Ie�koma lap�"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Lap� ie�kojimas �iek tiek u�truks"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "FTP ir HTTP metodams tu turi nurodyti viet�, kur yra hdlist\n"
-#~ "Ji turi b�ti nurodyta santykinai auk��iau esan�iam URL"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Ar pamir�ti pakeitimus?"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Paprasta 3 klavi�� pel� (serijin�)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Paprasta pel� (serijin�)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (serijin�)"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Nurodyk vard� (pvz: `extra', `commercial')"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "Ruo�iamasi �diegti %d MB. J�s galite pasirinkti daugiau program�"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Ruo�iamasi i�mesti �ra�� %s"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Grafin� s�saja"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "SILO turi sekan�ius �ra�us.\n"
-#~ "J�s galite pakeisti esamus arba prid�ti nauj�."
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "A� galiu pabandyti surasti prieinam� skiriam�j� geb� (pvz.: 800x600).\n"
-#~ "Bet kompiuteris gali \"pakibti\"\n"
-#~ "Ar J�s norite pabandyti?"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "A� radau ISDN plok�t�:\n"
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Jeigu DrakX nepavyko surasti j�s� pel�s arba j�s pats norite j�\n"
-#~ "nurodyti; jums bus parodytas s�ra�as\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu j�s sutinkate su DrakX nustatymais tiesiog paspauskite OK.\n"
-#~ "Kitokiu atveju pasirinkite pel� kuri jums labiausiai tinka.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu pas jus yra pel� su serijine jungtimi jums taip pat reik�s "
-#~ "nurodyti\n"
-#~ "prie kokios jungties ji yra prijungta."
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Jei tavo ADSL modemas yra Alcatel, pasirink Alcatel, kitu atveju -- ECI."
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "Kurioje valstyb�je tu dabar esi?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "�diegti/I�gelb�ti"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "SILO �diegimas nepavyko. �vyko sekanti klaida:"
-
-#~ msgid "Installed packages"
-#~ msgstr "�diegti paketai"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Interneto �rankiai"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "�diegim� reikia perstartuoti i� diskelio"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "�diegim� reikia perstartuoti su naujais parametrais"
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Labai rekomenduojama �ia pasirinkti \"Taip\". Jeigu j�s v�liau \n"
-#~ "�diegin�site Microsoft Windows ji naujai u�ra�ys startavimo sektori�.\n"
-#~ "Tada nepadar� startavimo diskelio kaip mes patar�je nebegal�site\n"
-#~ "startuoti GNU/Linux."
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) gali startuoti ir kitas Operacines sistemas.\n"
-#~ "Normaliai jos yra tinkamai nustatomos per �diegiant. Jeigu j�s� sistema\n"
-#~ "neaptikta j�s dabar galite prid�ti vien� arba kelet�.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu j�s nenorite kuri� nors naudoti galite i�imti (tada startavimo\n"
-#~ "diskelis gai u�krauti t� sistem�)."
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "Tiesus (reikalingas keletui SCSI kaupikli�)"
-
-#~ msgid "Local LAN"
-#~ msgstr "Lokalus LAN"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Vietinis tinklas jau buvo sukonfig�ruotas.\n"
-#~ "Ar tu nori:"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech pel�"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (serijin�)"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft pel�"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft 2.1A arba v�lesn�s Rev (serijin�)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Suderinama su Microsoft (serijin�)"
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Pajudinkite ratuk�!"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Tinklo adapteris 1 (eth0):"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Cdrom neprieinamas (nieko n�ra /mnt/cdrom)"
-
-#~ msgid "No match"
-#~ msgstr "Nieko nerasta"
-
-#~ msgid "No more match"
-#~ msgstr "Daugiau nieko nerasta"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Nerasta galim� variant�\n"
-#~ "Pabandykite kit� video plok�t� arba monitori�"
-
-#~ msgid "Other countries"
-#~ msgstr "Kitos valstyb�s"
-
-#~ msgid "Package"
-#~ msgstr "Paketas"
-
-#~ msgid "Password:"
-#~ msgstr "Slapta�odis:"
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Pra�ome pasirinkti skirsn�, kur� J�s naudosite kaip pagrindin�."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Pra�om patvirtinti sekan�i� informacij�"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, bibliotekos, �rankiai"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Konfig�ruojama..."
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Rescue"
-#~ msgstr "I�gelb�ti"
-
-#~ msgid "SILO main options"
-#~ msgstr "Bendri SILO nustatymai"
-
-#~ msgid "Sciences"
-#~ msgstr "Mokslai"
-
-#~ msgid "Sciencific Workstation"
-#~ msgstr "Mokslin�s darbo stotis"
-
-#~ msgid "Search"
-#~ msgstr "Paie�ka"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Ie�komas pagrindinis skirsnis."
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Pasirink dyd�, kiek nori �diegti"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Pasirinkite:\n"
-#~ "\n"
-#~ " - Rekomenduojama: Jeigu jums ans�iau n�ra tek� �diegti Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Vartotoji�ka: Jeigu jau tur�jote reikal� su Linux. Gal�site "
-#~ "pasirinkti\n"
-#~ "\"Normali\" bendros reik�m�s sistemos �diegimui, \"K�rimo\" jeigu "
-#~ "naudojate\n"
-#~ "savo kompiuter� kurti programoms ir \"Serverin�\" jeigu norite tur�ti "
-#~ "bendros paskirties (pvz. pa�to, spausdintuvo...) server�.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Eksperto: Jeigu j�s puikiai sekasi su GNU/Linux i�spr�sti rimtas "
-#~ "u�duotis.\n"
-#~ "Kaip ir konfiguracijoje \"Vartotoji�ka\" j�s gal�site pasirinkti koks "
-#~ "bus\n"
-#~ "�ios sistemos panaudojimas."
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Nustatyti SCSI"
-
-#~ msgid "Show less"
-#~ msgstr "Rodyti ma�iau"
-
-#~ msgid "Show more"
-#~ msgstr "Rodyti daugiau"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Rodyti tik lapus"
-
-#~ msgid "Shutting down"
-#~ msgstr "Bandoma i�jungti"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Dydis: %s MB"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovak�"
-
-#~ msgid "Sort by"
-#~ msgstr "R��iuoti pagal"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Sekan�ius paketus ruo�iamasi i�mesti"
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Dabar yra �diegiami paketai, kuriuos j�s pasirinkote. Tai tur�t�\n"
-#~ "kelet� minu�i� u�trukti, ta�iau jeigu j�s pasirinkote atnaujinti\n"
-#~ "tai tur�t� u�trukti kiek ilgiau."
-
-#~ msgid "This label is already in use"
-#~ msgstr "�i �ym� jau naudojama"
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "�i sekcija yra skirta vietinio tinklo (LAN) nustatymui.\n"
-#~ "\n"
-#~ "Jeigu j�s pasakyrite \"Taip\" DrakX pabandys pats surasti tinklo kort�.\n"
-#~ "PCI �renginys tur�t� b�ti surastas ir prijungtas automati�kai. Ta�iau\n"
-#~ "jeigu j�s� turite ISA �rengin� automatinis aptikimas nesuveiks ir j�s\n"
-#~ "tur�site nurodyti tvarkykl� i� s�ra�o, kuris tada pasirodys.\n"
-#~ "\n"
-#~ "\n"
-#~ "D�l SCSI �rengini�, leiskite tvarkyklei pirmiau pa�iai pabandyti "
-#~ "�rengin�,\n"
-#~ "nes kitokio atveju jums teks nurodyti nustatymus i� Windows Control "
-#~ "Panel\n"
-#~ "konfiguracijos\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu j�s �diegiate Mandrake Linux � kompiuter�, kuris jau yra tinkle\n"
-#~ "tinklo administratorius jums turi nurodyti informacij� apie IP adres�,\n"
-#~ "tinklo subkauk� ir tinklo kauk�. �diegiant priva�iam tinkle namuose, jums "
-#~ "tai\n"
-#~ "reik�s pasirinkti pa�iam."
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "A� pabandysiu �vairias galimas skiriamasias gebas.\n"
-#~ "J�s� ekranas mirg�s...\n"
-#~ "Jeigu norite, galite j� i�jungti, J�s i�girsite pyptel�jim�, kai bus "
-#~ "baigta"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Perjungti tarp �diegt� ir prieinam�"
-
-#~ msgid "Tree"
-#~ msgstr "Medis"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Ar bandyti surasti %s �renginius"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Ar bandyti surasti PCI �renginius"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Ar pabandyti surasti PCMCIA kortas?"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Ar bandyti surasti modem�?"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL katalogo, kuriame yra RPM'ai"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB pel� (su 3 arba daugiau klavi��)"
-
-#~ msgid "Update location"
-#~ msgstr "Atnaujinti suradimo viet�"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Atnaujinama RPM baz�"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Naudoti MD5 slapta�od�ius"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Naudoti DiskDrake"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Naudoti �e��lin� byl�"
-
-#~ msgid "User name:"
-#~ msgstr "Vartotojo vardas:"
-
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Sveiki, besinaudojantys LILO, operaciniu sistemu ikrovos tvarkykle!\n"
-#~ "\n"
-#~ "Noredami suzinoti pasirinkimu sarasa, spauskite <TAB>.\n"
-#~ "\n"
-#~ "Noredami ijungti viena is ju, irasykite jo pavadinima ir spauskite "
-#~ "<ENTER>\n"
-#~ "arba laukite %d sekundziu ijungimo pagal nutylejima.\n"
-#~ "\n"
-
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Sveiki, besinaudojantys SILO, operaciniu sistemu ikrovos tvarkykle!\n"
-#~ "\n"
-#~ "Noredami suzinoti pasirinkimu sarasa, spauskite <TAB>.\n"
-#~ "\n"
-#~ "Noredami ijungti viena is ju, irasykite jo pavadinima ir spauskite "
-#~ "<ENTER>\n"
-#~ "arba laukite %d sekundziu ijungimo pagal nutylejima.\n"
-#~ "\n"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Ko ie�kai?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Kokia J�s� pel�s r��is?"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Koks J�s� klaviat�ros i�d�stymas"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Kam bus naudojama tavo sistema?"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Koks J�s� vartojimas?"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Koki� �krovos tvarkykl�(-es) tu nor�tum naudoti?"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Kurios bylos ie�kai?"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Kurio paketo ie�kai"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Kokio tipo skirsn� norite tur�ti?"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Prie kurios nuosekliosios jungties prijungta tavo pel�?"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Jums neu�tenka vietos Lnx4win"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "Dabar j�s galite pasirinkti kokius norite �diegti paketus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pirmiausia j�s galite pasirinkti, koki� paket� grup� j�s norite �diegti\n"
-#~ "arba atnaujinti. Po to j�s galite pasirinkti paketus, kurius j�s norite\n"
-#~ "�diegti priklausomai nuo vietos kiek tam skiriate.\n"
-#~ "\n"
-#~ "\n"
-#~ "Informacija apie konkre�ius paketus galite pamatyti lauke, pavadintame\n"
-#~ " \"Info\" kuris yra de�in�je paket� s�ra�o pus�je."
-
-#~ msgid "automagic"
-#~ msgstr "Automagic"
-
-#~ msgid "beginner"
-#~ msgstr "pradedantysis"
-
-#~ msgid "brunette"
-#~ msgstr "brunet�"
-
-#~ msgid "changing type of"
-#~ msgstr "kei�iamas "
-
-#~ msgid "default"
-#~ msgstr "Pagrindinis"
-
-#~ msgid "developer"
-#~ msgstr "programuotojas"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "nenaudoti pppoe"
-
-#~ msgid "girl"
-#~ msgstr "mergina"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (svarbu)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (nuostabu)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (labai gerai)"
-
-#~ msgid "linear"
-#~ msgstr "Tiesus"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "nfs prijungimas nepavyko"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake dabar yra �atminties taupymo� re�ime.\n"
-#~ "A� paleisiu rpmdrake i� naujo, kad gal�tum ie�koti byl�"
-
-#~ msgid "tie"
-#~ msgstr "tie"
-
-#~ msgid "useless"
-#~ msgstr "nenaudinga"
-
-#~ msgid "vertical traditionnal aurora"
-#~ msgstr "vertikali tradicin� aurora"
-
-#~ msgid "woman-blond"
-#~ msgstr "blondin�"
diff --git a/perl-install/share/po/lv.po b/perl-install/share/po/lv.po
deleted file mode 100644
index 206302fd7..000000000
--- a/perl-install/share/po/lv.po
+++ /dev/null
@@ -1,12830 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 2000 Free Software Foundation, Inc.
-# Copyright (c) 2000 MandrakeSoft
-# Vitauts Stochka <vit@dpu.lv>, 2000.
-# Juris Kudi�� <cooker@inbox.lv>, 2001.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-08-22 00:12+0200\n"
-"Last-Translator: Juris Kudi�� <cooker@inbox.lv>\n"
-"Language-Team: Latvian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-13\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfigur�t visus ekr�nus neatkar�gi"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Lietot Xinerama pieb�vi"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigur�t tikai karti \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "N-ekr�nu konfigur�cija"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"J�su sist�ma atbalsta n-ekr�nu konfigur�ciju.\n"
-"Ko nu dar�sim?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafisk� karte"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Izv�lieties grafisko karti"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Izv�lieties X serveri"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X serveris"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Izv�lieties X serveri"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X serveris"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kuru XFree konfigur�ciju izv�laties?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"J�su karte sp�j nodro�in�t 3D akseler�ciju, bet tikai ar XFree %s.\n"
-"J�su karti uztur XFree %s, kam var b�t lab�ks 2D atbalsts."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "J�su karte sp�j nodro�in�t 3D akseler�ciju ar XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ar aparat�ras 3D akseler�ciju"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"J�su karte sp�j nodro�in�t 3D akseler�ciju ar XFree %s.\n"
-"�EMIET V�R�, KA TAS IR EKSPERIMENT�LS ATBALSTS, KAS VAR UZK�RT DATORU."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ar EKSPERIMENT�LU aparat�ras 3D akseler�ciju"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"J�su karte sp�j nodro�in�t 3D akseler�ciju, bet tikai ar XFree %s,\n"
-"�EMIET V�R�, KA TAS IR EKSPERIMENT�LS ATBALSTS, KAS VAR UZK�RT DATORU.\n"
-"J�su karti uztur XFree %s, kam var b�t lab�ks 2D atbalsts."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfigur�cija"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Izv�lieties grafisk�s kartes atmi�as apjomu"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Nor�diet servera opcijas"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Nor�diet monitoru"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitors"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Divi svar�g�kie parametri ir vertik�l� p�rz�m��anas frekvence, kas nosaka\n"
-"visa ekr�na p�rz�m��anas bie�umu, un horizont�l�s sinhroniz�cijas\n"
-"frekvence, kas nosaka skan��anas l�niju par�d��anas bie�umu.\n"
-"\n"
-"Ir �OTI SVAR�GI, lai j�s nenor�d�tu monitora tipu, kura sinhroniz�cijas\n"
-"frekvence p�rsniedz j�su monitora iesp�jas: j�s varat saboj�t savu "
-"monitoru.\n"
-" Ja neesat p�rliecin�ts, izv�lieties konservat�v�ko variantu."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizont�l� frekvence"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertik�l� frekvence"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitors nav konfigur�ts"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafisk� karte v�l nav konfigur�ta"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Iz��irtsp�jas v�l nav izv�l�tas"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Vai v�laties izm��in�t �o konfigur�ciju?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Br�din�jums: ��s grafisk�s kartes izm��in��ana var uzk�rt datoru"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Konfigur�cijas izm��in��ana"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"m��iniet izmain�t da�us parametrus"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Atkl�ta k��da:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Atliek %d sekundes"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Vai viss ir pareizi?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Atkl�ta k��da, m��iniet izmain�t da�us parametrus"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Iz��irtsp�ja"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Nor�diet iz��irtsp�ju un kr�su dzi�umu"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafisk� karte: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 serveris: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Vair�k"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Labi"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Eksperta re��ms"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Par�d�t visu"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Iz��irtsp�jas"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastat�ras izk�rtojums: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Peles tips: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Peles ier�ce: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitors: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitora horiz. frekv.: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitora vert. frekv.: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafisk� karte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafisk� karte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafisk� atmi�a: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kr�su dzi�ums: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Iz��irtsp�ja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 serveris: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 draiveris: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Gatavoju X-Window konfigur�ciju"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Ko j�s v�laties dar�t?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Monitora mai�a"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Grafisk�s kartes mai�a"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Servera opciju mai�a"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Iz��irtsp�jas mai�a"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Par�d�t inform�ciju"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "M��in�t v�lreiz"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Iziet"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Saglab�t izmai�as?\n"
-"Pa�reiz�j� konfigur�cija ir:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X p�c start��anas"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Datoru var konfigur�t, lai p�c sist�mas iel�des autom�tiski start�tu X.\n"
-"Vai v�laties, lai p�c p�rstart��anas tiktu palaists X?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Lai aktiviz�tu izmai�as, l�dzu aizveriet un atveriet %s sesiju"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "L�dzu aizveriet sesiju un nospiediet Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kr�sas (8 biti)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 t�ksto�i kr�su (15 biti)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 t�ksto�i kr�su (16 biti)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljoni kr�su (24 biti)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljardi kr�su (32 biti)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB vai vair�k"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Parasts VGA, 640x480 pie 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 pie 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 savietojams, 1024x768 pie 87 Hz ar josl�m (nav 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 pie 87 Hz ar josl�m, 800x600 pie 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Uzlabots Super VGA, 800x600 pie 60 Hz, 640x480 pie 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Ne-joslots SVGA, 1024x768 pie 60 Hz, 800x600 pie 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Augstas frekvences SVGA, 1024x768 pie 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekven�u, kas uztur 1280x1024 pie 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekcen�u, kas uztur 1280x1024 pie 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekven�u, kas uztur 1280x1024 pie 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitors, kas uztur 1600x1200 pie 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitors, kas uztur 1600x1200 pie 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "S�kn�jam�s part�cijas pirmais sektors"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Diska pirmais sektors (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO instal��ana"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kur j�s v�laties instal�t s�kn�t�ju?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instal��ana"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "S�kn�t�ja galven�s opcijas"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Kuru OS iel�d�t�ju lietot"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "S�kn�t�ja instal��ana"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "S�kn�jam� ier�ce"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nedarbojas ar veciem BIOSiem)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakts"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakts"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video re��ms"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Pauze pirms noklus�t�s sist�mas iel�des"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Parole"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Parole (atk�rtoti)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Ierobe�ot komandrindas opcijas"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ierobe�ot"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Izt�r�t /tmp katras s�kn��anas laik�"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ja nepiecie�ams, preciz�jiet RAM apjomu (atrasti %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "At�aut multi profilus"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Nor�diet atmi�as apjomu Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcijai ``Ierobe�ot komandrindas opcijas'' nav j�gas bez paroles"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "L�dzu m��iniet v�lreiz"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Paroles nesakr�t"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Noklus�t� OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"�eit ir da��di s�kn��anas ieraksti.\n"
-"J�s varat pievienot jaunus vai izmain�t eso�os."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Pievienot"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Izdar�ts"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Main�t"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "K�da veida ierakstu gribat pievienot"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Cita OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Cita OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Cita OS (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Att�ls"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Sakne"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Papildin�t"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Las�t-rakst�t"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabula"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nedro�s"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Nosaukums"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Noklus�ts"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-izm�rs"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "BezVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Izdz�st ierakstu"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Tuk�s nosaukums nav at�auts"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Jums ir nepiecie�ama swap part�cija"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "�is nosaukums jau ir izmantots"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Atrasti %s %s interfeisi"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Vai ir v�l k�ds?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Vai dator� ir k�ds %s interfeiss?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "N�"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "J�"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Apskat�t dzel�u inform�ciju"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instal�ju draiveri %s kartei %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modulis %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kuru %s draiveri pam��in�t?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Da�os gad�jumos %s draiverim ir j�nor�da papildus inform�cija, lai tas\n"
-"darbotos pareizi, tom�r parasti t� nav vajadz�ga. Vai v�laties nor�d�t\n"
-"papildus parametrus, vai ar� �ausit draiverim aptauj�t datoru un sav�kt\n"
-"nepiecie�amo inform�ciju? Retos gad�jumos aptauj��ana var uzk�rt datoru,\n"
-"ta�u tas nerad�s nek�dus boj�jumus."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Aptauj�t"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Nor�d�t opcijas"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Tagad j�s varat nor�d�t modu�a %s opcijas.\n"
-"Opciju form�ts ir ``nosaukums=v�rt�ba nosaukums2=v�rt�ba2 ...''.\n"
-"Piem�ram, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modu�a opcijas:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Modu�a %s iel�de bija neveiksm�ga.\n"
-"Vai v�laties pam��in�t ar citiem parametriem?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(jau pievienots %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "�� parole ir p�r�k vienk�r�a"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "L�dzu ievadiet lietot�ja v�rdu"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Lietot�ja v�rd� var b�t tikai mazie ang�u burti, cipari, `-' un `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "��ds lietot�ja v�rds jau ir pievienots"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Pievienot lietot�ju"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Ievadiet lietot�ju\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Apstiprin�t lietot�ju"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "V�rds un uzv�rds"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Lietot�ja v�rds"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "�aula"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autore�istr��an�s"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Sist�mu var konfigur�t t�, lai p�c start��anas autom�tiski tiktu\n"
-"atv�rta viena noteikta lietot�ja sesija. \n"
-"Ja nev�laties izmantot �o iesp�ju, nospiediet atcel�anas pogu."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Nor�diet noklus�to lietot�ju:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Nor�diet izmantojamo logu mened�eri:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "L�dzu izv�lieties izmantojamo valodu."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "J�s varat izv�l�ties citas valodas, kas b�s pieejamas p�c instal��anas"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Viss"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Lietot�ju pievieno�ana"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Piel�gota"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS start��ana"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"�o pakotni ir nepiecie�ams uzlabot\n"
-"Vai tie��m v�laties atteikties no t�s?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Atcelt"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Sveiciens hakeriem"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "V�j�"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standarta"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Augsts"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Augsts"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoisks"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"�o l�meni ir j�izmanto uzman�gi. Tas padara j�su sist�mu viegl�k\n"
-"izmantojamu, ta�u �oti nedro�u: to nedr�kst izmantot datoram, kas ir\n"
-"piesl�gts citiem datoriem vai Internetam. Netiek pras�tas paroles."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Tagad tiek izmantota parole, ta�u izmantot datoru t�kl� v�l aizvien\n"
-"nav ieteicams."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"�is ir parasts dro��bas l�menis, kas ir ieteicams datoram, kas tiks\n"
-"izmantots k� klients Interneta piesl�gumam. Tagad tiek p�rbaud�ta dro��ba. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Ar �o dro��bas l�meni sist�mu var s�kt izmantot k� serveri.\n"
-"Dro��ba tagad ir pietieko�i augsta, lai izmantotu sist�mu k� serveri, kas\n"
-"apkalpo piesl�gumus no daudziem klientiem. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"M�s izmantojam 4. l�me�a iesp�jas, ta�u tagad sist�ma ir piln�b�\n"
-"aizsl�gta. Dro��ba tagad ir maksim�laj� l�men�."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Izv�lieties dro��bas l�meni?"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Uzst�du dro��bas l�meni"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Nor�diet servera opcijas"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Juus sveic %s, opereetaajsisteemu paarsleedzeejs!\n"
-"\n"
-"Sarakstaa izveelieties vajadziigo sisteemu vai gaidiet %d sekundes, liidz "
-"tiks ielaadeeta nokluseetaa sisteema.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Juus sveic GRUB, opereetaajsisteemu izveeles programma!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Izmantojiet taustinus %c un %c, lai izveeleetos vajadziigo ierakstu."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Nospiediet ievadu, lai saakneetu izveeleeto OS, 'e', lai redigeetu"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandas pirms saakneesanas, vai 'c', lai izsauktu komandrindu."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Izdaliitais ieraksts tiks saakneets peec %d sekundeem."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nepietiek vietas part�cij� /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Darbavirsma"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Starta izv�lne"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kur j�s v�laties instal�t s�kn�t�ju?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pal�dz�ba pagaid�m nav realiz�ta.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "S�kn��anas stila konfigur��ana"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fails"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fails/_Beigt"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Kategoriz�jo�s Monitors"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitors"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicion�lais Monitors"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicion�lais Gtk+ Monitors"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Palaist Aurora s�kn��anas laik�"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub re��ms"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot re��ms"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"J�s pa�laik lietojat OS iel�d�t�ju %s.\n"
-"Spiediet Konfigur�t, lai palaistu uzst�d��anas meistaru."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigur�t"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sist�mas re��ms"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Palaist X-Window sist�mu s�kn��anas laik�"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "N�, negribu lietot autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "J�, gribu lietot autologin �im lietot�jam un darba virsmai"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Labi"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "las��anai nevar atv�rt /etc/inittab: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d min�tes"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 min�te"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundes"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Vair�k part�ciju nevar pievienot"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "J�s varat izv�l�ties citas valodas, kas b�s pieejamas p�c instal��anas"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Francijas"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Be��ijas"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "V�cijas"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grie�ijas"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norv��ijas"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Zviedrijas"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "It�lijas"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "seri�la"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Vispirms izveidojiet datu rezerves kopiju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lasiet uzman�gi!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ja gatavojaties izmantot aboot, neaizmirstiet atst�t br�vu vietu diska\n"
-"s�kum� (pietiek ar 2048 sektoriem)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "K��da"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Meistars"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Izv�lieties darb�bu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Jums ir viena liela FAT part�cija\n"
-"(parasti to izmanto MicroSoft Dos/Windows).\n"
-"Iesaku vispirms izmain�t ��s part�cijas izm�ru\n"
-"(uzklik��iniet uz t�s, tad uz \"Main�t izm�ru\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "L�dzu uzklik��iniet uz part�cijas"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Deta�as"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "mont��ana neizdev�s"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Tuk�s"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Cits"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Failu sist�mu tipi:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Izveidot"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tips"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "T� viet� izmantojiet ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Izdz�st"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Vispirms izmantojiet ``Nomont�t''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"P�c part�cijas %s tipa nomai�as visi �aj� part�cij� eso�ie dati tiks "
-"pazaud�ti"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Izv�lieties part�ciju"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Izv�lieties citu part�ciju"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Iziet"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "P�rsl�gt eksperta re��m�"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "P�rsl�gt norm�laj� re��m�"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Atsaukt"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Tad turpin�t?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Iziet nesaglab�jot"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Iziet neierakstot part�ciju tabulau?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Vai v�laties izm��in�t �o konfigur�ciju?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Izvietot autom�tiski"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Visu dz�st"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Ciet� diska inform�cija"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Visas prim�r�s part�cijas izmantotas"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Vair�k part�ciju nevar pievienot"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ja gribat vair�k part�cijas, izdz�siet k�du part�ciju, lai var�tu izveidot "
-"papla�in�to part�ciju"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Ierakst�t part�ciju tabulu"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Salabot part�ciju tabulu"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Salabot part�ciju tabulu"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Salabot part�ciju tabulu"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Iz�emams datu nes�js"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Izv�lieties failu"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Part�ciju tabulas rezerves kopijai ir at��ir�gs izm�rs\n"
-"Tom�r turpin�t, ja?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Uzman�bu"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ielieciet disketi\n"
-"Visi uz disketes eso�ie dati tiks dz�sti"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "M��inu sagl�bt part�ciju tabulu"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detaliz�ta inform�cija"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Mont��anas punkts"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcijas"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Main�t izm�ru"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "P�rvietot"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Format�t"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Mont�ta"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Pievienot pie RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Pievienot LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Nomont�t"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Izsl�gt no RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Iz�emt no LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Main�t RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Izmantot priek� loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Izveidot jaunu part�ciju"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "S�kuma sektors: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Izm�rs MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Failu sist�mas tips: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Mont��anas punkts: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Priek�roka: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Format�ju loopback failu %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Nomain�t part�cijas tipu"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Kuru failu sist�mu v�laties?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kur j�s v�laties mont�t loopback failu %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kur j�s v�laties mont�t %s ier�ci?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nevaru no�emt mont��anas punktu, jo �� part�cija tiek izmantota priek� "
-"loopback.\n"
-"Vispirms no�emiet loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Izskait�oju FAT failsist�mas robe�as"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Mainu izm�ru"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "��s part�cijas izm�ru nevar izmain�t"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Visiem ��s part�cijas datiem j�izveido rezerves kopijas"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"P�c part�cijas %s izm�ra mai�as visi �aj� part�cij� eso�ie dati tiks "
-"pazaud�ti"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Nor�diet jauno izm�ru"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Jauns izm�rs MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Uz kuru disku v�laties to p�rvietot?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektors"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Uz kuru sektoru v�laties to p�rvietot?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "P�rvietoju"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "P�rvietoju part�ciju..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Nor�diet eksist�jo�u RAID, kam pievienot"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "jauns"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Nor�diet jau eso�u LVM kam pievienot"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM v�rds?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "�o Part�ciju nevar izmantot priek� loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback faila v�rds: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "V�rds un uzv�rds"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Fails jau tiek izmantots citam loopback, nor�diet citu failu"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Fails jau eksist�. Vai to izmantot?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Mont��anas iesp�jas:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Viss kas"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "ier�ce"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "l�menis"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "gabala izm�rs"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Esiet uzman�gi: �� oper�cija ir b�stama."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "K�ds ir sadal�juma tips?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Diem��l es ne�au�u izveidot /boot tik t�lu uz diska (uz cilindra > 1024).\n"
-"Vai nu j�s izmantojat LILO, un tas nestr�d�s, vai ar� j�s neizmantojat LILO, "
-"un /boot jums nav vajadz�gs"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"part�cija, ko j�s izv�l�j�ties pievienot k� sakni (/), fiziski atrodas aiz\n"
-"�� ciet� diska 1024. cilindra, un jums nav /boot part�cijas.\n"
-"Ja j�s pl�nojat izmantot LILO, neaizmirstiet pievienot /boot part�ciju"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"J�s izv�l�jies programmat�ras uztur�tu RAID part�ciju k� saknes part�ciju "
-"(/).\n"
-"Neviens s�kn�t�js nesp�j to izmantot bez /boot part�cijas.\n"
-"T�p�c neaizmirstiet izveidot /boot part�ciju."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Iek�rtas %s part�ciju tabula tiks ierakst�ta uz diska!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Lai izmai�as st�tos sp�k�, jums ir j�p�rstart� dators"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"P�c part�cijas %s format��anas visi �aj� part�cij� eso�ie dati tiks pazaud�ti"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Format�ju"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Format�ju loopback failu %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Format�ju part�ciju %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid neizdev�s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Nepietiek br�vas vietas, lai izvietotu jaunas part�cijas"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Nepietiek br�vas vietas, lai izvietotu jaunas part�cijas"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Iz��irtsp�ja: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Ier�ce: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS iek�rtas burts: %s (tikai min�jums)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tips: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "V�rds: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "S�kums: sektors %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Izm�rs: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektori"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "No cilindra %d l�dz cilindram %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Format�ta\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Neformat�ta\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Mont�ta\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback fails(i): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Noklus�ti s�kn�jam� part�cija\n"
-"    (lai s�kn�tu MS-DOS, nevis lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "L�menis %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Gabala izm�rs %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID diski %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback faila nosaukums: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Izm�rs: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "�eometrija: %s cilindri, %s galvas, %s sektori\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diski %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "part�ciju tabulas tips: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "uz �inas %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcijas: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Failu sist�mas tips: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "�� parole ir p�r�k vienk�r�a (j�b�t vismaz %d simbolus garai)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Paroles nesakr�t"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Main�t tipu"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "L�dzu uzklik��iniet uz part�cijas"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS serveris"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s format��ana %s neizdev�s"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nezinu, k� format�t %s, izmantojot tipu %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "k��da nomont�jot %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "vienk�r�s"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "serveris"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Nevarat izmantot JFS part�cij�m, kas maz�kas par 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Nevarat izmantot ReiserFS p�rt�cij�m, kas maz�kas par 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Mont��anas punktiem j�s�kas ar /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jau eksist� part�cija ar mont��anas punktu %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "�im katalogam ir j�paliek saknes failsist�m�"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"�im mont��anas punktam ir nepiecie�ama re�la failu sist�ma (ext2, reiserfs)\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"�im mont��anas punktam ir nepiecie�ama re�la failu sist�ma (ext2, reiserfs)\n"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Nepietiek br�vas vietas, lai izvietotu autom�tiski"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "K��da, atverot %s ierakst��anai: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Atkl�ta k��da - nav atrasta neviena ier�ce, kas der�tu jaunu failsist�mu "
-"veido�anai. L�dzu p�rbaudiet dzel�us, lai noskaidrotu probl�mas iemeslu"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Jums nav nevienas part�cijas!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Augst�k ir uzskait�tas eksist�jo��s Linux part�cijas, kas ir atrastas uz "
-"j�su\n"
-"ciet� diska. J�s varat atst�t meistara izdar�to izv�li, jo t� ir laba\n"
-"parast�m vajadz�b�m. Ja j�s izmain�t �o izv�li, jums ir j�defin� vismaz\n"
-"saknes part�cij�(\"/\"). Neizv�lieties p�r�k mazu part�ciju, cit�di j�s "
-"nevar�sit\n"
-"instal�t visas vajadz�g�s programmas. Ja v�laties datus glab�t atsevi���\n"
-"part�cij�, jums ir j�nor�da ar� \"/home\" (to var izdar�t tikai tad, ja jums "
-"ir\n"
-"vair�kas Linux part�cijas).\n"
-"\n"
-"\n"
-"J�su zin��anai, katra part�cija ir uzskait�ta ��d� veid�: \"Nosaukums\", "
-"\"Izm�rs\".\n"
-"\n"
-"\n"
-"\"Nosaukums\" ir kod�ts ��di: \"ciet� diska tips\", \"ciet� diska numurs\",\n"
-"\"part�cijas numurs\" (piem�ram, \"hda1\").\n"
-"\n"
-"\n"
-"\"Ciet� diska tips\" ir \"hd\", ja j�su cietais disks ir IDE disks, \"sd\",\n"
-"ja tas ir SCSI cietais disks.\n"
-"\n"
-"\n"
-"\"Ciet� diska numurs\" vienm�r ir burts p�c \"hd\" vai \"sd\". IDE diskiem:\n"
-"\n"
-"   * \"a\" noz�m� \"prim�r� IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"b\" noz�m� \"prim�r� IDE konytroliera pak�rtotais disks\",\n"
-"\n"
-"   * \"c\" noz�m� \"sekund�r� IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"d\" noz�m� \"sekund�r� IDE kontroliera pak�rtotais disks\".\n"
-"\n"
-"\n"
-"SCSI diskiem \"a\" noz�m� \"prim�rais cietais disks\", \"b\" noz�m�\n"
-" \"sekund�rais cietais disks\", utt..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Tagad varat nor�d�t servisus, kurus j�s v�laties start�t sist�mas\n"
-"palai�anas laik�.\n"
-"\n"
-"\n"
-"Kad pele p�rvietojas p�r saraksta elementu, par�d�s\n"
-"neliels pal�dz�bas balons, kas paskaidro servisa lomu.\n"
-"\n"
-"\n"
-"Esiet �pa�i uzman�gs �aj� sol�, ja v�laties sist�mu izmantot ka serveri:\n"
-"iesp�jams, ka nev�laties start�t nevienu nevajadz�gu servisu. Atcerieties.\n"
-"ka da�i servisi var b�t b�stami, ja darbojas server�.\n"
-"Parasti izv�lieties tikai tos servisus, kas jums tie��m nepiecie�ami."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Pa�laik jums ir j�izv�las, kur uz ciet� diska instal�t Mandrake Linux\n"
-"oper�t�jsist�mu. Ja disks ir tuk�s vai cita oper�t�jsist�ma aiz�em visu\n"
-"vietu uz diska, jums b�s j�veic diska sadal��ana. �sum�, ciet� diska\n"
-"sadal��ana noz�m� to sadal�t lo�isk�s da��s, lai izveidotu vietu\n"
-"Mandrake Linux sist�mas instal��anai.\n"
-"\n"
-"\n"
-"Sakar� ar to, ka diska sadal��anas process parasti ir neatgriezenisks,\n"
-"nepieredz�ju�am lietot�jam tas var b�t nepat�kams un stresa pilns.\n"
-"�is meistars vienk�r�o procesu. Pirms uzs�kat dal��anu, izlasiet\n"
-"rokasgr�matu un visu labi p�rdom�jiet.\n"
-"\n"
-"\n"
-"Jums ir nepiecie�amas vismaz divas part�cijas. Viena vajadz�ga pa�ai "
-"sist�mai,\n"
-"otra - virtu�lajai atmi�ai (Swap).\n"
-"\n"
-"\n"
-"Ja part�cijas jau izveidotas (agr�kas instal��anas laik� vai ar citu diska\n"
-"sadal��anas r�ku), jums tikai j�nor�da t�s part�cijas, kur�s v�laties\n"
-"instal�t Linux sist�mu.\n"
-"\n"
-"\n"
-"Ja part�cijas v�l nav izveidotas, jums t�s ir j�izveido. Lai to izdar�tu,\n"
-"izmantojiet augst�k pieejamo meistaru. Atkar�b� no j�su ciet� diska \n"
-"konfigur�cijas ir iesp�jami vair�ki risin�jumi:\n"
-"\n"
-"* Izmantot eso�u part�ciju: meistars uz ciet� diska ir atkl�jis vienu vai "
-"vair�kas Linux part�cijas. Ja v�laties\n"
-" t�s saglab�t, izv�lieties �o opciju. \n"
-"\n"
-"\n"
-"* Izdz�st visu disku: ja v�laties izdz�st visus uz diska eso�os datus un "
-"part�cijas un aizst�t t�s ar jaunu\n"
-"  Mandrake Linux sist�mu, varat izv�l�ties �o opciju. Esiet uzman�gi, "
-"izv�loties �o risin�jumu, jo p�c\n"
-"  apstiprin��anas j�s vairs nevar�sit atteikties no ��s izv�les.\n"
-"\n"
-"\n"
-"* Izmanto br�vo vietu Windows part�cij�: ja uz ciet� diska ir instal�ts "
-"Microsoft Windows, kas aiz�em visu\n"
-"  vietu, jums ir j�atbr�vo vieta Linux datiem. Lai to izdar�tu, j�s varat "
-"nodz�st Microsoft Windows part�ciju un\n"
-"  datus (skat�t risin�jumus \"Izdz�st visu disku\" vai \"Eksperta re��ms\") "
-"vai izmain�t Microsoft\n"
-"  Windows part�cijas izm�ru. part�cijas izm�ru var izmain�t bez datu "
-"zaud��anas. �is risin�jums ir ieteicams, ja\n"
-"  j�s sav� dator� v�laties izmantot gan Mandrake Linux, gan Microsoft "
-"Windows.\n"
-"\n"
-"\n"
-"  Pirms izv�laties �o risin�jumu, �emiet v�r�, ka Microsoft Windows "
-"part�cijas izm�rs b�s maz�ks, nek� tas ir\n"
-"  pa�laik. Tas noz�m�, ka jums Microsoft Windows sist�m� b�s maz�k vietas "
-"datiem vai programmu instal��anai.\n"
-"\n"
-"\n"
-"* Eksperta re��ms: ja j�s v�laties patst�v�gi veidot diska part�cijas, varat "
-"izv�l�ties �o variantu. Esiet\n"
-"  uzman�gi, izveloties �o risin�jumu. Tas ir ar pla��m iesp�j�m, bet �oti "
-"b�stams. J�s varat pazaud�t\n"
-"  visus datus, t�p�c izv�lieties tikai tad, ja zinat, ko dar�t."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Visas jaunizveidot�s part�cijas ir j�format�, pirms t�s var izmantot\n"
-"(format��ana noz�m� failsist�mas izveido�anu).\n"
-"\n"
-"\n"
-"Tagad j�s ar� varat izv�l�ties p�rformat�t da�as jau eso�as part�cijas, lai\n"
-"izdz�stu taj�s eso�o inform�ciju. Ja j�s v�laties to dar�t, nor�diet\n"
-"part�cijas, kuras v�laties format�t.\n"
-"\n"
-"\n"
-"�emiet v�r�, ka nav nepiecie�ams p�rformat�t visas jau eksist�jo�as "
-"part�cijas.\n"
-"Jums ir j�format� part�cijas, kur�s atrodas oper�t�jsist�ma (piem�ram, \"/"
-"\",\n"
-"\"/usr\" vai \"/var\"), bet nav j�format� part�cijas, kur�s atrodas dati, "
-"ko\n"
-"j�s v�laties saglab�t (parasti /home).\n"
-"\n"
-"\n"
-"Esiet uzman�gi, izv�loties part�cijas, jo p�c format��anas visi dati b�s\n"
-"izn�cin�ti un j�s vairs nevar�sit tos atjaunot.\n"
-"\n"
-"\n"
-"Noklik��iniet \"Labi\", kad esat gatavi format�t part�cijas.\n"
-"\n"
-"\n"
-"Noklik��iniet \"Atcelt\", ja j�s gribat izv�l�ties citas part�cijas, kur\n"
-"instal�t jauno Mandrake Linux oper�t�jsist�mu."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"J�su jaun� Mandrake Linux oper�t�jsist�ma pa�laik tiek\n"
-"instal�ta. �� darb�ba aiz�ems da�as min�tes (tas ir atkar�gs no apjoma,\n"
-"ko j�s izv�l�j�ties instal�t, un no j�su datota �truma.)\n"
-"\n"
-"\n"
-"L�dzu esiet paciet�gs."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Pa�laik jums ir j�izv�las, kur�(s) diska part�cij�(s) instal�t Mandrake "
-"Linux\n"
-"oper�t�jsist�mu. Ja part�cijas jau ir izveidotas (agr�kas GNU/Linux "
-"instal��anas\n"
-"laik� vai ar citu diska sadal��anas r�ku), j�s varat izmantot eso��s "
-"dada�as.\n"
-"Citos gad�jumos ir j�veido jaunas diska part�cijas.\n"
-"\n"
-"\n"
-"Lai veidotu part�cijas, jums vispirms ir j�izv�las cietais disks. J�s varat\n"
-"nor�d�t sadal�mo disku, noklik��inot uz \"hda\" pirmajam IDE diskam,\n"
-"\"hdb\" - otrajam diskam, \"sda\" - pirmajam SCSI diskam, utt.\n"
-"\n"
-"\n"
-"Lai sadal�tu izv�l�to cieto disku, varat izmantot sekojo�as opcijas:\n"
-"\n"
-"   * Izdz�st visu: �� opcija izdz�� visas part�cijas, kas atrodas uz "
-"izv�l�t� ciet� diska.\n"
-"\n"
-"\n"
-"   * Izvietot autom�tiski: �� opcija �auj jums autom�tiski izveidot Ext2 un "
-"swap part�cijas j�su ciet� diska\n"
-"     br�vaj� viet�.\n"
-"\n"
-"\n"
-"   * Salabot part�ciju tabulu: ja part�ciju tabula ir boj�ta, j�s varat "
-"m��in�t to autjaunot, izmantojot �o opciju.\n"
-"     Esiet uzman�gi un atcerieties, ka tas var neizdoties.\n"
-"\n"
-"\n"
-"   * Atsaukt: j�s varat izmantot �o opciju, lai atceltu izmai�as.\n"
-"\n"
-"\n"
-"   * P�rl�d�t: j�s varat izmantot �o opciju, ja v�laties atsaukt visas "
-"izmai�as un iel�d�t s�kotn�jot part�ciju tabulu.\n"
-"\n"
-"\n"
-"   * Meistart: Ja ciet� diska sadal��anai v�laties izmantot meistaru, varat "
-"lietot �o opciju. T� ir ieteicama,\n"
-"     ja jums nav labu zin��anu par diska sadal��anu.\n"
-"\n"
-"\n"
-"   * Atjaunot no disketes: ja iepriek��j�s instal��anas laik� saglab�j�t "
-"part�ciju tabulu disket�, j�s varat\n"
-"     to atjaunot, izmantojot �o opciju.\n"
-"\n"
-"\n"
-"   * Saglab�t disket�: ja v�laties part�ciju tabulu saglab�t disket�, lai "
-"var�tu to atjaunot, izmantojiet �o\n"
-"     opciju. Ir �oti ieteicams izmantot �o opciju.\n"
-"\n"
-"\n"
-"   * Izdar�ts: kad esat pabeigu�i ciet� diska dal��anu, izmantojiet �o "
-"opciju, lai saglab�tu izmai�as.\n"
-"\n"
-"\n"
-"J�su zin��anai, jebkuru opciju var izsaukt ar tastat�ru: p�rvietojieties "
-"starp part�cij�m, izmantojot Tab un Au�up/Lejup bulti�as.\n"
-"\n"
-"\n"
-"Kad ir izv�l�ta part�cija, j�s varat izmantot:\n"
-"\n"
-"           * Ctrl-c, lai izveidotu jaunu part�ciju (kad ir izv�l�ta tuk�a "
-"part�cija)\n"
-"\n"
-"           * Ctrl-d, lai izdz�stu part�ciju\n"
-"\n"
-"           * Ctrl-m, lai uzst�d�tu mont��anas punktu"
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Uz j�su ciet� diska ir atrasta vair�k nek� viena Microsoft Windows "
-"part�cija.\n"
-"L�dzu izv�lieties to part�ciju, kuras izm�ru j�s v�laties izmain�t, lai\n"
-"instal�tu jauno Mandrake Linux oper�t�jsist�mu.\n"
-"\n"
-"\n"
-"J�su zin��anai, katra part�cija ir uzskait�ta ��d� veid�: \"Linux nosaukums"
-"\",\n"
-"\"Windows nosaukums\" \"Izm�rs\".\n"
-"\n"
-"\"Linux nosaukums\" ir kod�ts ��di: \"ciet� diska tips\", \"ciet� diska\n"
-"numurs\", \"part�cijas numurs\" (piem�ram, \"hda1\").\n"
-"\n"
-"\n"
-"\"Ciet� diska tips\" ir \"hd\", ja j�su cietais disks ir IDE disks, \"sd\",\n"
-"ja tas ir SCSI cietais disks.\n"
-"\n"
-"\n"
-"\"Ciet� diska numurs\" vienm�r ir burts p�c \"hd\" vai \"sd\". IDE diskiem:\n"
-"\n"
-"   * \"a\" noz�m� \"prim�r� IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"b\" noz�m� \"prim�r� IDE konytroliera pak�rtotais disks\",\n"
-"\n"
-"   * \"c\" noz�m� \"sekund�r� IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"d\" noz�m� \"sekund�r� IDE kontroliera pak�rtotais disks\".\n"
-"\n"
-"\n"
-"SCSI diskiem \"a\" noz�m� \"prim�rais cietais disks\", \"b\" noz�m�\n"
-" \"sekund�rais cietais disks\", utt...\n"
-"\n"
-"\"Windows nosaukums\" ir j�su ciet� diska burts Windows vid� (pirmais disks\n"
-"vai part�cija saucas \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "L�dzu esat paciet�gs. �� darb�ba var ilgt vair�kas min�tes."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"L�dzu izv�lieties \"Instal�t\", ja nav instal�ta vec�ka Linux-Mandrak "
-"versija\n"
-"vai j�s v�laties izmantot vair�kas oper�t�jsist�mas.\n"
-"\n"
-"\n"
-"L�dzu izv�lieties \"Atjaunin�t\", ja j�s v�laties atjaunin�t jau instal�tu\n"
-"Mandrake Linux versiju.\n"
-"\n"
-"\n"
-"Atkar�b� no j�su GNU/Linux zin��an�m, varat izv�l�ties vienu no "
-"sekojo�ajiem\n"
-"Mandrake Linux instal��anas vai atjaunin��anas l�me�iem:\n"
-"\n"
-"* Ieteicama: ja neesat ne reizi instal�jis GNU/Linux oper�t�jsist�mu, "
-"izv�lieties �o l�meni. Instal��ana b�s\n"
-"  �oti vienk�r�a, un jums tiks uzdoti tikai da�i jaut�jumi.\n"
-"\n"
-"\n"
-"* Piel�gota: ja pietiekami labi p�rzinat GNU/Linux, varat nor�d�t sist�mas "
-"pamatpielietojumu (darbastacija, serveris,\n"
-"  izstr�dei). Jums b�s j�atbild uz vair�k jaut�jumiem nek� \"Ieteicamas\" "
-"instal��anas klases gad�jum�, t�p�c\n"
-"  jums j�zina, k� darbojas GNU/Linux, ja gribat izv�l�ties �o klasi.\n"
-"\n"
-"\n"
-"* Eksperta: ja j�s labi zinat GNU/Linux, varat izv�l�ties �o instal��anas "
-"klasi. T�pat k� \"Piel�gotas\" klases\n"
-"  gad�jum�, j�s var�sit nor�d�t sist�mas pamatpielietojumu (darbastacija, "
-"serveris, izstr�dei). Esiet �oti\n"
-"  uzman�gi, pirms izv�laties �o klasi. J�s var�sit veikt �oti prec�zi "
-"piel�gotu instal��anu.\n"
-"  Uz da�iem jaut�jumiem b�s gr�ti atbild�t, ja j�su GNU/Linux zin��anas nav "
-"pietieko�i labas. T�p�c neizv�lieties\n"
-"  �o instal��anas klasi, ja neesat p�rliecin�ts."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"L�dzu izv�lieties pareizu portu. Piem�ram, MS Windows\n"
-"ports COM1 GNU/Linux vid� saucas ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) un Grub ir s�kn�t�ji: tie sp�j s�kn�t GNU/Linux\n"
-"vai jebkuru citu oper�t�jsist�mu, kas ir uzst�d�ta j�su dator�.\n"
-"Parasti citas oper�t�jsist�mas tiek korekti noteiktas un instal�tas.\n"
-"Ja t� nenotiek, j�s �aj� ekr�n� varat patst�v�gi pievienot ierakstu. Esiet\n"
-"uzman�gs, izv�loties pareizus parametrus.\n"
-"\n"
-"\n"
-"J�s varb�t ar� v�laties ne�aut nevienam piek��t p�r�j�m oper�t�jsist�m�m,\n"
-"un �aj� gad�jum� j�s varat izdz�st attiec�gos ierakstus. Bet �aj�\n"
-"gad�jum� jums b�s nepiecie�ama s�kn��anas diskete, lai t�s s�kn�tu!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Jums ir j�nor�da, kur j�s v�laties novietot\n"
-"GNU/Linux s�kn��anai nepiecie�amo inform�ciju.\n"
-"\n"
-"\n"
-"Ja vien j�s neesat absol�ti p�rliecin�ts par savu r�c�bu,\n"
-"izv�lieties \"Diska pirmais sektors (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX m��in�s samekl�t PCI SCSI adapteri(us).\n"
-"Ja DrakX atrad�s k�du SCSI adapteri un zin�s, kuru draiveri izmantot,\n"
-"tas tiks instal�ts autom�tiski.\n"
-"\n"
-"Ja jums nav SCSI adapteru, ir ISA SCSI adapteris vai PCI SCSI adapteris,\n"
-"ko DrakX neatpaz�st, jums tiks pajaut�ts, vai j�su sist�m� ir SCSI\n"
-"adapteris. Ja nav SCSI adapteru, j�s varat vienk�r�i izv�l�ties 'N�'.\n"
-"Ja j�s izv�laties 'J�', jums tiks par�d�ts draiveru saraksts, kur�\n"
-"varat izv�l�ties vajadz�go adapteri.\n"
-"\n"
-"\n"
-"Ja jums nepiecie�ams patst�v�gi nor�d�t adapteri, DrakX pajaut�s, vai\n"
-"v�laties nor�d�t adaptera opcijas. Jums b�tu j��auj DrakX aptauj�t\n"
-"dzel�us un noskaidrot opcijas. Parasti tas izdodas bez probl�m�m.\n"
-"\n"
-"Ja neizdodas, jums patst�v�gi j�nor�da draivera opcijas.\n"
-"Izlasiet Instal��anas rokasgr�matu (3. noda�u, apak�noda�u \"Inform�cijas "
-"sav�k�ana par j�su dzel�iem\"), lai uzzin�tu, k� ieg�t �o\n"
-"inform�ciju no dzel�u dokument�cijas, ra�ot�ja t�kla lapas\n"
-"(ja jums ir pieejams Internets) vai Windows (ja tas ir uzst�d�ts j�su "
-"dator�)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Nor�diet cieto disku, ko v�laties izdz�st, lai izveidotu jaunu\n"
-"Mandrake Linux part�ciju. Esiet uzman�gi, jo visi disk� eso�ie dati\n"
-"pazud�s un neb�s atjaunojami."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Nospiediet \"Labi\", ja v�laties izdz�st visus datus un\n"
-"part�cijas, kas atrodas uz �� ciet� diska. Esiet uzman�gi, p�c \"Labi\" "
-"nospie�anas j�s nevar�sit atjaunot nek�dus datus vai part�cijas, kas "
-"atrad�s\n"
-"uz diska, taj� skait� ar� Windows datus.\n"
-"\n"
-"\n"
-"Nospiediet \"Atcelt\", lai atceltu �o oper�ciju bez jebk�du uz �� diska "
-"eso�u datu vai part�ciju pazaud��anas."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ielieciet FAT format�tu disketi iek�rt� %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Lai izmantotu �o saglab�to pakot�u izv�li, palaidiet instal�ciju ar ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "K��da, nolasot failu %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Da�u j�su datora dzel�u darb�bai nepiecie�ami ``firmas'' draiveri.\n"
-"Papildus inform�ciju varat atrast �eit: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Jums ir nepiecie�ama saknes part�cija.\n"
-"�im nol�kam izveidojiet part�ciju (vai uzklik��iniet uz jau eso�as).\n"
-"Tad izv�lieties darb�bu ``Mont��anas punkts'' un nor�diet, ka tas ir `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Jums ir nepiecie�ama swap part�cija"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Jums nav swap part�cijas\n"
-"\n"
-"Vai tom�r turpin�t?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Jums ir nepiecie�ama swap part�cija"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Izmantot br�vo vietu"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nepietiek br�vas vietas, lai izvietotu jaunas part�cijas"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Izmantot jau eso�u part�ciju"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nav nevienas part�cijas, ko var�tu izmantot"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Izmantot Windows part�ciju priek� loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kuru part�ciju v�laties izmantot priek� Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Izv�lieties izm�rus"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Saknes part�cijas izm�rs (MB): "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Swap part�cijas izm�rs (MB): "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Izmantot Windows part�cijas br�vo vietu"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kuras part�cijas izm�ru v�laties izmain�t?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Izskait�oju Windows failu sist�mas robe�as"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT izm�ra main�t�js nesp�j izmain�t j�su part�ciju,\n"
-"atkl�ta sekojo�a k��da: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Windows part�cija ir p�r�k fragment�ta, vispirms palaidiet ``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"BR�DIN�JUMS!\n"
-"\n"
-"Tagad DrakX izmain�s Windows part�cijas izm�ru. Esiet uzman�gs: �� darb�ba\n"
-"ir b�stama. Ja j�s to v�l neesat izdar�jis, jums vispirms ir j�p�rtrauc\n"
-"instal��ana, no Windows j�palai� scandisk (ieteicams palaist ar� defrag),\n"
-"tad atk�rtoti j�s�k instal��ana. Vajadz�tu izveidot ar� datu rezerves\n"
-"kopiju. Kad esat p�rliecin�ts, nospiediet Labi."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "K�du apjomu v�laties atst�t priek� windows uz"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "part�cija %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT izm�ra mai�a neizdev�s: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nav FAT part�ciju, lai izmain�to to izm�ru vai izmantotu k� loopback (vai "
-"nepietiek br�vas vietas)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Izdz�st visu disku"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "No�emt Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Jums ir vair�k nek� viens cietais disks, uz kura j�s instal�jat linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "VISAS diska %s part�cijas un taj�s eso�ie dati tiks pazaud�ti"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Piel�gots disku sadal�jums"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Izmantot fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Tagad j�s varat sadal�t diska iek�rtu %s.\n"
-"Kad esat pabeigu�i, neaizmirstiet saglab�t, izmantojot `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "J�su Windows part�cij� nav pietieko�i daudz br�vas vietas"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Nevaru atrast vietu instal��anai"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX part�ciju veido�anas meistars atrada sekojo�us risin�jumus:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Diska sadal��ana neizdev�s: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Iedarbinu t�klu"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Atsl�dzu t�klu"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Atkl�ta k��da, bet es nezinu, k� ar to pareizi apieties.\n"
-"Turpiniet, ja v�laties risk�t."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dubl�ts mont��anas punkts %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Da�as svar�gas pakotnes neizdev�s pareizi instal�t.\n"
-"Ir boj�ta j�su kompaktdisku iek�rta vai instal�cijas disks.\n"
-"Parbaudiet disku uz instal�ta datora, izmantojot komandu \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "J�s sveic %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nav nevienas diske�u iek�rtas"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Uzs�ku soli `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"J�su sist�mai tr�kst resursu. Mandrake Linux instal��anas laik� var\n"
-"rasties probl�mas. Ja t� notiek, varat pam��in�t teksta instal��anu.\n"
-"Lai to izdar�tu, nospiediet`F1', ka notiek iel�de no CDROM, tad ievadiet\n"
-"`text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Instal��anas klase"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "L�dzu izv�lieties vienu no sekojo��m instal��anas klas�m:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Kop�jais j�su izv�l�to grupu izm�rs ir aptuveni %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ja j�s v�laties instal�t maz�k nek� �o izm�ru,\n"
-"procentu�li izv�lieties instal�jamo pakot�u daudzumu.\n"
-"\n"
-"Zems procentu l�menis instal�s tikai vissvar�g�k�s pakotnes;\n"
-"100% l�men� tiks instal�tas visas izv�l�t�s pakotnes."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Jums uz diska ir vieta tikai %d%% no ��m pakotn�m.\n"
-"\n"
-"Ja v�laties instal�t maz�k, procentu�li izv�lieties instal�jamo pakot�u\n"
-"daudzumu. Zems procentu l�menis instal�s tikai vissvar�g�k�s pakotnes;\n"
-"%d%% l�menis instal�s tik daudz pakot�u, cik ir iesp�jams."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "N�kamaj� sol� j�s var�sit izv�l�ties daudz prec�z�k."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Instal�jamo pakot�u procentu�lais daudzums"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Pakot�u grupu izv�le"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Atsevi��u pakot�u izv�le"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Kop�jais izm�rs: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Slikta pakotne"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nosaukums: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versija: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Apjoms: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Svar�gums: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"J�s nevarat izv�l�ties �o pakotni, jo nepietiek vietas t�s instal��anai"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Tiks instal�tas sekojo�as pakotnes"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Tiks no�emtas sekojo�as pakotnes"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "J�s varat izv�l�ties/atteikties no ��s pakotnes"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "�� ir oblig�ta pakotne, no t�s nevar atteikties"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "J�s nevarat atteikties no ��s pakotnes. T� jau ir instal�ta"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"�o pakotni ir nepiecie�ams uzlabot\n"
-"Vai tie��m v�laties atteikties no t�s?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "J�s nevarat atteikties no ��s pakotnes. To ir nepiecie�ams uzlabot"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instal�t"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Saglab�t disket�"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Saglab�t pakot�u izv�li"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Instal��anas beigas"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Izv�lieties pakotnes, ko v�laties instal�t"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instal�ju"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Apr��inu"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Atliku�ais laiks"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "L�dzu gaidiet, gatavoju instal�ciju"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakotnes"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instal�ju pakotni %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Pie�emt"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Noraid�t"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Nomainiet Cd-Rom!\n"
-"\n"
-"L�dzu ielieciet iek�rt� Cd-Rom \"%s\", kad tas ir izdar�ts, nospiediet Labi\n"
-"Ja jums nav �� diska, nospiediet Atcelt, lai neinstal�tu no �� Cd-Rom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Tom�r turpin�t?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Pakot�u k�rto�anas laik� atkl�ta k��da:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Pakot�u instal��anas laik� atkl�ta k��da:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Br�din�jums\n"
-"\n"
-"L�dzu r�p�gi izlasiet zem�k eso�os nosac�jumus. Ja j�s nepiekr�tat k�dai\n"
-"to da�ai, j�s nedr�kstat instal�t no �� CD. Nospiediet 'Noraid�t', lai\n"
-"turpin�tu instal��anu, neizmantojot �o datu nes�ju.\n"
-"\n"
-"\n"
-"Da�i �aj� CD datu nes�j� eso�ie komponenti nav pak�auti GPL licencei vai\n"
-"l�dz�giem l�gumiem. Katra ��da komponenta izmanto�anu nosaka atsevi��as\n"
-"licences noteikumi un nosac�jumi. L�dzu r�p�gi to izlasiet un iev�rojiet\n"
-"t�s nosac�jumus, pirms izmantot vai izplat�t uzskait�tos komponentus.\n"
-"��s licences p�rsvar� aizliegs jums p�rs�t�t, dubl�t (iz�emot rezerves\n"
-"kop��anas nol�kus), izplat�t t�l�k, reversi uzb�v�t, de-asambl�t,\n"
-"de-kompil�t vai modific�t �o kompomentu. Jebkur� ��s vieno�an�s p�rk�pums\n"
-"jums autom�tiski at�ems ties�bas, ko pie���rusi attiec�g� licence. Iz�emot\n"
-"gad�jumus, kad konkr�tas lcences nosac�jumi jums dod ��das ties�bas, j�s\n"
-"parasti nedr�kstat instal�t ��du programmu uz vair�k nek� vienas sist�mas\n"
-"vai piel�got to izmanto�anai t�kl�. Ja �aub�ties, l�dzu sazinieties ar\n"
-"komponenta izplat�t�ju vai redaktoru.\n"
-"��du komponentu, taj� skait� ar� iek�aut�s dokument�cijas, nodo�ana\n"
-"tre�aj�m person�m vai kop��ana parasti ir aizliegta.\n"
-"\n"
-"\n"
-"Visas n�kamaj� CD datu nes�j� iek�auto komponentu ties�bas pieder to\n"
-"attiec�gajiem autoriem, un t�s aizsarg� intelektu�l� �pa�uma un\n"
-"autorties�bu likumi, kas attiecas uz programnodro�in�jumu.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Atkl�ta k��da"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Vai v�laties p�rstart�t t�klu"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licences l�gums"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastat�ra"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "L�dzu izv�lieties j�su tastat�ras izk�rtojumu."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "�eit ir pilns pieejamo tastat�ru saraksts"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Kuru instal��anas klasi v�laties?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instal�t/Atjaunin�t"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "�� ir instal��ana vai atjaunin��ana?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Ieteicama"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Eksperta"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Atjaunin�t"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Saglab�t pakot�u izv�li"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "L�dzu izv�lieties j�su peles tipu."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Peles ports"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "L�dzu izv�lieties, kuram seri�lajam portam ir piesl�gta pele."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigur�ju PCMCIA kartes..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfigur�ju IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nav pieejamu part�ciju"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "P�rmekl�ju part�cijas, lai atrastu mont��anas punktus"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Izv�lieties mont��anas punktus"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Neizdev�s nolas�t diska part�ciju tabulu, jo t� bija p�r�k stipri boj�ta :(\n"
-"Sist�ma var m��in�t atsl�gts slikt�s part�cijas (VISI DATI pazud�s!).\n"
-"Otrs risin�jums ir aizliegt DrakX izmain�t part�ciju tabulu.\n"
-"(k��da ir %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake neizdev�s pareizi nolas�t part�ciju tabulu.\n"
-"Turpiniet, ja v�laties risk�t!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Izv�lieties part�cijas, ko v�laties format�t"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Saknes part�cija"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Kura ir j�su sist�mas saknes part�cija (/)?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Lai part�ciju tabulas izmai�as st�tos sp�k�, jums j�p�rstart� dators"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Izv�lieties part�cijas, ko v�laties format�t"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "P�rbaud�t sliktos blokus?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Format�ju part�cijas"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Veidoju un format�ju failu %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Instal��anas pabeig�anai nepietiek swap, palieliniet swap"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Mekl�ju pieejam�s pakotnes"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Mekl�ju uzlabojam�s pakotnes"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"J�su sist�m� vairs nav br�vas vietas instal��anai vai uzlabo�anai (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Pilna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minim�la (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Ieteicama (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Atjanot no disketes"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Atjanot no disketes"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Pakot�u grupu izv�le"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Ielieciet disketi iek�rt� %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Saglab�t disket�"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ja jums ir visi �aj� sarakst� nor�d�tie CD, nospiediet Labi.\n"
-"Ja jums nav neviena no nor�d�tajiem CD, nospiediet Atcelt.\n"
-"Ja tr�kst tikai da�u CD, sarakst� atsl�dziet tos un nospiediet Labi."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ar nosaukumu \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Sagatavoju instal��anu"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instal�ju pakotni %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "P�cinstal��anas konfigur��ana"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ielieciet disketi iek�rt� %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ielieciet tuk�u disketi iek�rt� %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Tagad jums ir iesp�ja iel�d�t �ifr��anai nepiecie�am�s programmas.\n"
-"\n"
-"BR�DIN�JUMS:\n"
-"\n"
-"Sakar� ar to, ka uz �o programmu izmanto�anu attiecas da��das visp�r�jas\n"
-"pras�bas un da��da likumdo�ana, �o programmu sa��m�jam un/vai gala\n"
-"lietot�jam ir j�p�rliecin�s, ka vi�a likumdo�ana �auj vi�am iel�d�t,\n"
-"glab�t un/vai izmantot ��s programmas.\n"
-"\n"
-"Bez tam sa��m�jam un/vai gala lietot�jam ir j�b�t �pa�i uzman�gam, lai\n"
-"nep�rk�ptu �o likumdo�anu. Ja sa��m�js un/vai gala lietot�js neiev�ros\n"
-"atbilsto�os likumus, pret vi�u tiks pielietotas nopietnas sankcijas.\n"
-"\n"
-"Mandrakesoft vai t� ra�ot�ji un/vai pieg�d�t�ji nek�d� gad�jum� neb�s\n"
-"atbild�gi par tie�iem, netie�iem vai nejau�iem boj�jumiem (ieskaitot, bet\n"
-"neaprobe�ojoties ar ien�kumu zaud��anu, komercdarb�bas aptur��anu,\n"
-"komerci�lu datu zaud��anu un citiem finansi�liem zaud�jumiem, un iesp�jamu\n"
-"atbild�bu un atl�dzin�jumu, kas b�tu j�maks� saska�� ar tiesas spriedumu),\n"
-"kas var�tu rasties sakar� ar programmu lieto�anu, glab��anu vai vienk�r�u\n"
-"iel�d��anu, kur�m sa��m�js un/vai gala lietot�js b�s sp�j�gs piek��t\n"
-"p�c ��s vieno�an�s apstiprin��anas.\n"
-"\n"
-"\n"
-"Ja jums ir jebk�di jaut�jumi sakar� ar �o vieno�anos, l�dzu sazinieties ar\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Piesl�dzos spogu�serverim, lai sa�emtu pieejamo pakot�u sarakstu"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izv�lieties spogu�serveri, no kura �emt pakotnes"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Piesl�dzos spogu�serverim, lai sa�emtu pieejamo pakot�u sarakstu"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "K�da ir j�su laika josla?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Vai datora pulkstenis r�da GMT laiku?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS serveris"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Att�ls CUPS serveris"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nav printera"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Vai ir v�l k�ds?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Kopsavilkums"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Pele"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Laika josla"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printeris"
-
-#: ../../install_steps_interactive.pm_.c:1049
-#, fuzzy
-msgid "ISDN card"
-msgstr "Iek��ja ISDN karte"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-#, fuzzy
-msgid "Sound card"
-msgstr "Standarta"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Izmantot NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Lok�ls printeris"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "root paroles izv�le"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez paroles"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "�� parole ir p�r�k vienk�r�a (j�b�t vismaz %d simbolus garai)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentifik�cija"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autentifik�cija"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "serveris"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autentifik�cijas NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS dom�ns"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS serveris"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Piel�got� s�kn��anas diskete pied�v� veidu, k� s�kn�t j�su Linux sist�mu\n"
-"neatkar�gi no parast� s�kn�t�ja. Tas ir noder�gi, ja j�s nev�laties sav�\n"
-"sist�m� uzst�d�t SILO, vai k�da cita oper�t�jsist�ma izdz�� SILO,\n"
-"vai ar� SILO nedarbojas ar j�su dzel�u konfigur�ciju. Piel�goto\n"
-"s�kn��anas disketi var izmantot ar� kop� ar Mandrake gl�b�anas att�lu,\n"
-"atvieglojot atjauno�anu p�c smagiem sist�mas boj�jumiem.\n"
-"\n"
-"Ja v�laties izveidot j�su sist�mai piel�gotu s�kn��anas disketi,\n"
-"ielieciet sisketi pirmaj� iek�rt� un nospiediet \"Labi\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Pirm� diske�u iek�rta"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Otr� diske�u iek�rta"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Izlaist"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Piel�got� s�kn��anas diskete pied�v� veidu, k� s�kn�t j�su Linux sist�mu\n"
-"neatkar�gi no parast� s�kn�t�ja. Tas ir noder�gi, ja j�s nev�laties sav�\n"
-"sist�m� uzst�d�t LILO (vai grub), vai k�da cita oper�t�jsist�ma izdz��\n"
-"LILO, vai ar� LILO nedarbojas ar j�su dzel�u konfigur�ciju. Piel�goto\n"
-"s�kn��anas disketi var izmantot ar� kop� ar Mandrake glab�anas att�lu,\n"
-"atvieglojot atjauno�anu p�c smagiem sist�mas boj�jumiem. Vai v�laties\n"
-"izveidot j�su sist�mai piel�gotu s�kn��anas disketi?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Diem��l nav pieejama neviena diske�u iek�rta"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Nor�diet diske�u iek�rtu, ko izmanto distetes veido�anai"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ielieciet disketi iek�rt� %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Gatavoju s�kn��anas disketi"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Sagatavoju s�kn�t�ju"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Vai v�laties izmantot aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"K��da, instal�jot aboot, \n"
-"vai instal�t piespiedu k�rt� pat tad, ja tiks izn�cin�ta pirm� part�cija?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "S�kn�t�ja instal��ana"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "S�kn�t�ja instal��ana neizdev�s. Atkl�ta ��da k��da:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ielieciet tuk�u disketi iek�rt� %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Sagatavoju auto instal��anas disketi"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Da�i so�i nav izpild�ti.\n"
-"\n"
-"Vai tie��m v�laties iziet t�l�t?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Apsveicam, instal��ana ir pabeigta.\n"
-"Iz�emiet s�kn��anas datu nes�ju un nospiediet ievadu, lai p�rstart�tu "
-"datoru.\n"
-"\n"
-"\n"
-"Lai sa�emtu inform�ciju par labojumiem, kas ir pieejami �im Mandrake Linux\n"
-"izdevumam, skatiet Errata failu, kas atrodams\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Inform�cija par j�su sist�mas konfigur��anu ir pieejama Ofici�l�s\n"
-"Mandrake Linux rokasgr�matas p�cinstal��anas noda��."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Sagatavot auto instal��anas disketi"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Autom�tisks"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Atk�rtot"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Saglab�t pakot�u izv�li"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux instal��ana %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"   <Tab>/<Alt-Tab> p�riet | <Space> izv�l�ties | <F12> uz n�kamo ekr�nu"
-
-#: ../../interactive.pm_.c:87
-#, fuzzy
-msgid "kdesu missing"
-msgstr "atmest"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Izv�lieties darb�bu"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Izv�rsta"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "L�dzu uzgaidiet"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Izv�rst koku"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sak�aut koku"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Sak�rtots vien� sarakst� vai pa grup�m"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Slikta izv�le, pam��iniet v�lreiz\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "J�su izv�le? (noklus�ti %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "J�su izv�le? (noklus�ti %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opcijas: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Vai v�laties izmantot aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "J�su izv�le? (noklus�ti %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "�ehijas (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "V�cijas"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvoraka"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Sp�nijas"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Somijas"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francijas"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norv��ijas"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polijas"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Krievijas"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Zviedrijas"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Apvienot�s Karalistes"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "ASV tastat�ra"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Ir�nas"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Arm�nijas (vec�)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Arm�nijas (rakst�mma��na)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Arm�nijas (fon�tisk�)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaid��nas (lat��u)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Be��ijas"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Arm�nijas (fon�tisk�)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulg�rijas"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Braz�lijas (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Baltkrievijas"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "�veices (v�cu izvietojums)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "�veices (fran�u izvietojums)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "�ehijas (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "V�cijas (bez m�majiem tausti�iem)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "D�nijas"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvoraka (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvoraka (Norv��ijas)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvoraka (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Igaunijas"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijas (\"krievu\" izvietojums)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijas (\"lat��u\" izvietojums)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grie�ijas"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ung�rijas"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Horv�tijas"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izra�las"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Izra�las (fon�tisk�)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Ir�nas"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandes"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "It�lijas"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Jap�nas 106 taisti�i"
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Apvienot�s Karalistes"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Lat��amerikas"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lietuvas AZERTY (vec�)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lietuvas AZERTY (jaun�)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lietuvas \"numuru rinda\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lietuvas \"fon�tisk�\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Atra�an�s vieta"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Ma�edonijas"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "D�nijas"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polijas (qwerty izvietojums)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polijas (qwertz izvietojums)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portug�les"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kan�das (Kvebeka)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Krievijas (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Krievijas (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Krievijas (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slov�nijas"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slov�kijas (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slov�kijas (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaid��nas (kirilica)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabula"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tai tastat�ra"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Tai tastat�ra"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turcijas (tradicion�lais \"F\" modelis)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turcijas (modernais \"Q\" modelis)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrainas"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "ASV tastat�ra (starptautisk�)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnamas \"numuru rinda\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Dienvidsl�vijas (lat��u/kirilicas)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cikliski mont��anas punkti %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - pele"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Parasta PS2 Wheel pele"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-#, fuzzy
-msgid "1 button"
-msgstr "2 pogas"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Parasta 2 pogu pele"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Visp�r�ja"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Ritenis"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seri�la"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Parasta 3 pogu pele"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (seri�la, vecs C7 tips)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 pogas"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 pogas"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "neviens"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Nav peles"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "L�dzu notest�jiet peli"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Lai aktiviz�tu peli,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "PAKUSTINIET RITENI!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-#, fuzzy
-msgid "Finish"
-msgstr "Somijas"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "T�l�k ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Atpaka�"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Vai tas ir pareizi?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Piesl�gties Internetam"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Parast�kais veids, k� piesl�gties ar adsl, ir pppoe.\n"
-"Da�i piesl�gumi izmanto pptp, pavisam nedaudzi dhcp.\n"
-"Ja j�s nezinat, izv�lieties 'izmantot pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "izmantot dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "izmantot pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "izmantot pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Kuru dhcp klientu v�laties izmantot?\n"
-"Noklus�ti ir dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"J�su sist�m� nav atrasts neviens ethernet t�kla adapteris.\n"
-"Nevaru uzst�d�t �o piesl�guma veidu."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Izv�lieties t�kla interfeisu"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"L�dzu nor�diet, kuru t�kla adapteri v�laties izmantot Interneta piesl�gumam."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "t�kla karte nav atrasta"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfigur�ju t�klu"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"L�dzu ievadiet j�su resursa v�rdu, ja to zinat.\n"
-"Da�u DHCP serveru darb�bai ir nepiecie�ams resursa v�rds.\n"
-"Resursa v�rdam ir j�b�t pilnam kvalific�tam resursa v�rdam,\n"
-"piem�ram, ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Resursa v�rds:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "T�kla konfigur��anas meistars"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "�r�js ISDN mod�ms"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Iek��ja ISDN karte"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "K�ds ir j�su ISDN piesl�guma veids?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Tika atkl�ta ugunsm�ra konfigur�cija!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Tika atkl�ta ugunsm�ra konfigur�cija!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN konfigur�cija"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Izv�lieties pakalpojumu sniedz�ju.\n"
-" Ja tas nav �aj� sarakst�, izv�lietis Nav sarakst�"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protokols"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Eiropa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Citur pasaul�"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Citur pasaul� \n"
-" nav D-Channel (izdal�tas l�nijas)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "K�du protokolu v�laties izmantot?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "K�ds ir j�su kartes tips?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Nezinu"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ja jums ir ISA karte, v�rt�b�m n�kamaj� ekr�n� j�b�t pareiz�m.\n"
-"\n"
-"Ja jums ir PCMCIA karte, jums ir j�zina kartes irq un io.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "P�rtraukt"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Turpin�t"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Kura ir j�su ISDN karte ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ir atkl�ta ISDN PCI karte, bet nav zin�ms kartes tips. L�dzu izv�lieties "
-"k�du no n�kamaj� ekr�n� uzskait�taj�m PCI kart�m."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nav atrasta neviena ISDN PCI karte. L�dzu izv�lieties k�du no saraksta."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "L�dzu nor�diet, kuram seri�lajam portam ir piesl�gts mod�ms."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Iezvanpieejas opcijas"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Savienojuma nosaukums"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefona numurs"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Lietot�ja ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Ar skriptu"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Izmantojot termin�li"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Dom�na nosaukums"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Pirmais DNS serveris"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Otrais DNS serveris"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Varat atsl�gties vai p�rkonfigur�t piesl�gumu."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Varat p�rkonfigur�t piesl�gumu."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Pa�laik j�s esat piesl�dzies Internetam."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Varat piesl�gties Internetam vai p�rkonfigur�ts piesl�gumu."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Pa�laik j�s neesat piesl�dzies Internetam."
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Nav piesl�gts"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "ISDN piesl�gums"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "T�kla konfigur��ana"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Interneta piesl�gums un konfigur�cija"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Varat atsl�gties vai p�rkonfigur�t piesl�gumu."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Varat atsl�gties vai p�rkonfigur�t piesl�gumu."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "T�kla konfigur�cija"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Izv�lieties konfigur�jamo profilu"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Noskaidroju ier�ces..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Parasts mod�ma piesl�gums"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "atkl�ts uz porta %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN piesl�gums"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "atkl�ts %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN piesl�gums"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "atkl�ts uz interfeisa %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabe�a piesl�gums"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Kabe�a piesl�gums"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN piesl�gums"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet karte(s) atrasta"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Izv�lieties izmantojamo r�ku"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Interneta piesl�guma koplieto�ana"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Vai v�laties start�t piesl�gumu palai�anas laik�?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "T�kla konfigur�cija"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Vai v�laties p�rstart�t t�klu"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"BR�DIN�JUMS: �� ier�ce jau agr�k ir konfigur�ta, lai piesl�gtos Internetam.\n"
-"Vienk�r�i apstipriniet, ka v�laties saglab�t �o konfigur�ciju.\n"
-"T�l�ko lauku izmain��ana p�rrakst�s �o konfigur�ciju."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"L�dzu ievadiet �� datora IP konfigur�ciju.\n"
-"Visi dati j�ievada k� IP adreses ar punktiem atdal�tu decim�lu\n"
-"skait�u veid� (piem�ram, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigur�ju t�kla iek�rtu %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (draiveris %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adrese"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "T�kla maska"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Autom�tisks IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adreses form�tam j�b�t 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"L�dzu ievadiet resursa v�rdu.\n"
-"Resursa v�rdam ir j�b�t pilnam kvalific�tam resursa v�rdam,\n"
-"piem�ram, ``mybox.mylab.myco.com''.\n"
-"J�s varat ievad�t ar� v�rtejas IP adresi, ja t�da ir"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS serveris"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "V�rtejas ier�ce"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxy serveru konfigur�cija"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy b�tu j�b�t http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy b�tu j�b�t ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Interneta konfigur�cija"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Vai v�laties m��in�t piesl�gties internetam t�l�t?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Izm��inu piesl�gumu..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sist�ma pa�laik ir piesl�gta Internetam."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"��iet, ja j�su sist�mu nav piesl�gta Internetam.\n"
-"M��iniet p�rkonfigur�t piesl�gumu."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Savienojuma konfigur��ana"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "L�dzu aizpieldiet vai izv�lietis lauku"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kartes IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kartes mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kartes IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kartes IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kartes IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "J�su priv�tais telefona numurs"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Pakalpojumu sniedz�ja nosaukums (piem., provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Pakalpojumu sniedz�ja telefona numurs"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Provaidera dns 1 (nav oblig�ti)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Provaidera dns 2 (nav oblig�ti)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Tastat�ras izv�le"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Zvan��anas re��ms"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Savienojuma tips: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Savienojuma tips: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Konta nosaukums (lietot�ja v�rds)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Konta parole"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "mont��ana neizdev�s: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "�ai platformai papla�in�t� part�cija nav pieejama"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"J�su diska part�ciju tabul� ir caurums, bet es to nevaru izmantot.\n"
-"Vien�gais risin�jums ir p�rvietot prim�ras part�cijas t�, lai caurums "
-"atrastos blakus papla�in�taj�m part�cij�m"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Atjauno�ana no faila %s neizdev�s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "K��da, ierakstot fail� %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "nepiecie�ama"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "svar�ga"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "�oti der�ga"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "der�ga"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "varb�t"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lok�ls printeris"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Att�ls printeris"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Att�ls CUPS serveris"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Att�ls lpd serveris"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "T�kla printeris (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Printera serveris"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Printera ier�ces URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Lok�ls printeris"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Att�ls printeris"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "K��da, ierakstot fail� %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modulis %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS servera IP"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Noklus�ts)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Izv�lieties printera piesl�gumu"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "K� �is printeris ir piesl�gts?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Izmantojot att�lu CUPS serveri, �eit jums nav nepiecie�ams\n"
-"konfigur�t printeri; printeri tiks atrasti autom�tiski.\n"
-"Ja j�s �aubaties, izv�lieties \"Att�ls CUPS serveris\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "LAN konfigur�cija"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Att�ls CUPS serveris"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adreses form�tam j�b�t 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Porta numuram ir j�b�t skaitlim"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS servera IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Ports"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "S�kn��anas stila konfigur��ana"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Noskaidroju ier�ces..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "P�rbaud�t portus"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Nav printera"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Lok�ls printeris"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Att�ls printeris"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Att�ls printeris"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Att�ls printeris"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "atkl�ts %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Printera ier�ces URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Lok�ls printeris"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "L�dzu nor�diet, kuram seri�lajam portam ir piesl�gts mod�ms."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Printera ier�ces URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Konfigur�cija"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instal�ju pakotni %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instal�ju pakotni %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Nolasu CUPS draiveru datub�zi..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Nolasu CUPS draiveru datub�zi..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Att�la lpd printera opcijas"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Lai izmantotu att�lu lpd drukas rindu, jums j�nor�da\n"
-"printera servera resursa v�rds un t�s servera rindas\n"
-"nosaukums, kurai j�adres� drukas uzdevumi."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Att�l� resursa v�rds"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Att�ls printeris"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Att�l� resursa v�rds"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Att�l� resursa v�rds"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) printera opcijas"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Lai druk�tu ar SMB printeri, jums j�nor�da SMB resursa v�rds\n"
-"(Piez�me! Tas var at��irties no datora TCP/IP v�rda!)\n"
-"un, iesp�jams, �� servera IP adrese, k� ar� j�s interes�jo�� printera\n"
-"koplietojuma v�rds un atbilsto�s lietot�ja v�rds, parole un\n"
-"darba grupas inform�cija."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB servera resurss"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB servera IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Koplietojuma v�rds"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Darba grupa"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare printera opcijas"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Lai druk�tu ar NetWare printeri, jums j�nor�da NetWare\n"
-"printera servera v�rds (Piez�me! tas var at��irties no servera\n"
-"TCP/IP resursa v�rda!), k� ar� j�su izv�l�t� printera rindas\n"
-"nosaukums un jebkur� atbilsto�s lietot�ja v�rds un parole."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printera serveris"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Printera rindas nosaukums"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Socket printera opcijas"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Lai druk�tu ar socket printeri, jums ir j�nor�da printera\n"
-"resursa v�rds t�kl� un papildus ar� porta numurs."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Printera resursa v�rds"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Printera resursa v�rds"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Printera ier�ces URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Printera nosaukums"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Apraksts"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Atra�an�s vieta"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Nolasu CUPS draiveru datub�zi..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Att�ls printeris"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Vai tas ir pareizi?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Att�ls printeris"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Printera piesl�gums"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "K�ds ir j�su printera tips?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Interneta konfigur�cija"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Interneta konfigur�cija"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Vai v�laties izm��in�t printeri?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "P�rbaud�t portus"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "J�, izdruk�t abas izm��in�juma lapas"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Printeris"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standarta"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Tiek druk�ta(s) izm��in�juma lapa(s)..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Tiek druk�ta(s) izm��in�juma lapa(s)..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Tiek druk�ta(s) izm��in�juma lapa(s)..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Tiek druk�ta(s) izm��in�juma lapa(s)..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Izm��in�juma lapa(s) ir nos�t�ta(s) printera demonam.\n"
-"It may take some time before the printer starts.\n"
-"Var paiet zin�ms laiks, pirms printeris s�k druk�t.\n"
-"Izdrukas st�voklis:\n"
-"%s\n"
-"\n"
-"Vai tas darbojas pareizi?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Izm��in�juma lapa(s) ir nos�t�ta(s) printera demonam.\n"
-"Var paiet zin�ms laiks, pirms printeris s�k druk�t.\n"
-"Vai tas darbojas pareizi?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Nav printera"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Pele"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Atsl�dzu t�klu"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Atsl�dzu t�klu"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Printera opcijas"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Nolasu CUPS draiveru datub�zi..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Interneta konfigur�cija"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Nav printera"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Nolasu CUPS draiveru datub�zi..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Konfigur�cija"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Izm��inu piesl�gumu..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "T�kla konfigur��ana"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitors nav konfigur�ts"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfigur�ju t�klu"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Kuru druk��anas sist�mu v�laties izmantot?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Augsts"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoisks"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Kuru druk��anas sist�mu v�laties izmantot?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Izv�lieties printera piesl�gumu"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kuru druk��anas sist�mu v�laties izmantot?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigur�t printeri"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instal�ju pakotni %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Printera opcijas"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Nolasu CUPS draiveru datub�zi..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Konfigur�t printeri"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Vai v�laties konfigur�t printeri?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Printeris"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Eksist� sekojo�as drukas rindas.\n"
-"J�s varat pievienot jaunass vai izmain�t eso��s."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Eksist� sekojo�as drukas rindas.\n"
-"J�s varat pievienot jaunass vai izmain�t eso��s."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "T�kla konfigur��ana"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Vai v�laties izm��in�t �o konfigur�ciju?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Interneta konfigur�cija"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Vai v�laties izm��in�t �o konfigur�ciju?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Interneta piesl�guma koplieto�ana"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Printera piesl�gums"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Tiek druk�ta(s) izm��in�juma lapa(s)..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Vai v�laties izm��in�t �o konfigur�ciju?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Att�ls printeris"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Nolasu CUPS draiveru datub�zi..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Lok�ls printeris"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Vai v�laties p�rstart�t t�klu"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Nolasu CUPS draiveru datub�zi..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Proxy serveru konfigur�cija"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Ports"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Proxy b�tu j�b�t http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Porta numuram ir j�b�t skaitlim"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Proxy b�tu j�b�t ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Autore�istr��an�s"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Parole"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Bez paroles"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Paroles nesakr�t"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nevar pievienot part�ciju _format�tam_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Neizdodas ierakst�t failu %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid neizdev�s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid neizdev�s (varb�t nav uzst�d�ti raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nepietiek diska part�ciju RAID l�menim %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron ir periodisku komandu pl�not�js."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd paredz�ts baterijas st�vok�a nov�ro�anai un gr�mato�anai ar syslog.\n"
-"To var izmantot ar� datora izsl�g�anai, kad baterija ir izl�d�ta."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Palai� komandas, kas ir iepl�notas noteikt� laik�, izmantojot at komandu,\n"
-"k� ar� palai� komadu paketes, kad vid�j� sist�mas noslodze ir pietieko�i\n"
-"zema."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron ir parasta UNIX programma, kas palai� lietot�ju nor�d�t�s programmas\n"
-"periodiski iepl�notos laikos. vixie cron pied�v� virkni papildus\n"
-"iesp�ju sal�dzinot ar UNIX cron, taj� skait� ar� lab�ku dro��bu un daudz\n"
-"izv�rtst�kas konfigur��anas iesp�jas."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM nodro�ina peles atbalstu da��d�m teksta re��ma Linux programm�m,\n"
-"piem�ram, Midnight Commander. Tas ar� �auj no konsoles ar peli veikt\n"
-"izgriezt-un-iespraust oper�cijas, k� ar� pied�v� izleco�o izv�l�u\n"
-"atbalstu konsolei."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache ir Vispasaules t�mek�a (WWW) serveris. Tas tiek izmantots HTML\n"
-"failu un CGI izplat��anai."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneta superservera demons (parasti saukts par inetd) p�c vajadz�bas\n"
-"start� da��dus interneta servisus. Tas it atbild�gs par daudzu servisu\n"
-"start��anu, taj� skait� telnet, ftp, rsh un rlogin. inetd atsl�g�ana\n"
-"atsl�dz ar� visus servisus, par kuriem tas atbild."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"�� pakotne iel�d� izv�l�to tastat�ras karti, kas nor�d�ta fail�\n"
-"/etc/sysconfig/keyboard. To var izv�l�ties, izmantojot programmu kbdconfig.\n"
-"Vairum� gad�jumu �o pakotni ir j�atst�j izv�l�tu."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd ir drukas demons, kas ir nepiecie�ams lpr pareizai darb�bai. Tas ir\n"
-"serveris, kas nos�ta drukas uzdevumus printeri(e)m."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) ir dom�nu v�rdu serveris (DNS), kas tiek izmantots resursu\n"
-"v�rdiem atbilsto�o IP adre�u noskaidro�anai."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Mounts un unmounts ir T�kla Failu sist�mas (NFS), SMB (Lan\n"
-"Manager/Windows) un NCP (NetWare) mont��anas punkti."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiviz�/Deaktiviz� visus t�kla interfeisus, kas ir konfigur�ti\n"
-"start��anai sist�mas s�kn��anas laik�."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ir popul�rs protokols failu koplieto�anai TCP/IP t�klos.\n"
-"�is serviss nodro�ina NFS servera funkcionalit�ti, un to var konfigur�t\n"
-"ar faila /etc/exports pal�dz�bu."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ir popul�rs protokols failu koplieto�anai TCP/IP t�klos.\n"
-"�is serviss nodro�ina NFS failu aizsl�g�anas funkcionalit�ti."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA atbalsts parasti ir paredz�ts, piem�ram, t�kla kar�u un mod�mu\n"
-"uztur��anai p�rn�s�jamos datoros. Tas netiks start�ts, ja nav konfigur�ts,\n"
-"t�p�c ir dro�i to instal�t datoros, kam tas nav nepiecie�ams."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper apkalpo RPC piesl�gumus, ko izmanto citi protokoli,\n"
-"piem�ram, NFS un NIS. portmap serveri ir j�izmanto datoros, kas\n"
-"darbojas k� RPC protokolus izmantojo�u protokolu serveri."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix ir Pasta Transporta A�ents, un t� ir programma, kas p�rvieto\n"
-"pastu no viena datora uz citu."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Saglab� un atjauno sist�mas entropijas kr�tuvi, lai �ener�tu\n"
-"kvalitat�v�kus gad�jumskait�us."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed demons �auj autom�tiski atjaunin�t IP mar�rutizatora tabulu,\n"
-"izmantojot RIP protokolu. Kaut gan RIP tiek pla�i izmantots nelielos\n"
-"t�klos, sare���t�kiem t�kliem ir nepiecie�ami sare���t�ki mar�rutiz��anas\n"
-"protokoli."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokols �auj t�kla lietot�jiem sa�emt veiktsp�jas\n"
-"inform�ciju par jebkuru �� t�kla datoru."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Protokols rusers t�kla lietot�jiem �auj noskaidrot, kuru lietot�ju\n"
-"sesijas ir atv�rtas citos atbildo�ajos datoros."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protokols rwho att�liem lietot�jiem �auj sa�emt visu atv�rto lietot�ju\n"
-"sesiju sarakstu no datora, kur� darbojas rwho demons (l�dz�gi finger)."
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Palaist X-Window sist�mu start��anas laik�"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog ir meh�nisms, ko daudzi demoni izmanto zi�ojumu gr�mato�anai\n"
-"daudzos sist�mas �urn�lu failos. Ir gudra doma vienm�r darbin�t syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Start� un aptura X Fontu Serveri s�kn��anas un aizv�r�anas laik�."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izv�l�ties, kurus servisus vajag autom�tiski start�t iel�des laik�"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Printeris"
-
-#
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internets"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Sist�mas re��ms"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Att�la lpd printera opcijas"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Serveris, Datub�zes"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ier�ce"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Uzman�bu"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Papildin�t"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "St�voklis:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektors"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Citur pasaul�"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Interneta pieeja"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multim�diji - Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#
-#: ../../share/advertising/04-develop.pl_.c:9
-#, fuzzy
-msgid "Development"
-msgstr "Izstr�de, T�meklis"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Piesl�gties Internetam"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "T�kla interfeiss"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB servera resurss"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Sp�les"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Eksperta"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instal�ju pakotni %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Man neizdodas nolas�t part�ciju tabulu, priek� manis t� ir p�r�k boj�ta :(\n"
-"Es m��in��u turpin�t, atsl�dzot slikt�s part�cijas"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "K��da"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "P�cinstal��anas konfigur��ana"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "S�kn��anas stila konfigur��ana"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Apsveicam!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instal�t"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Lietot�ju pievieno�ana"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Format�ju loopback failu %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Pakot�u grupu izv�le"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "L�dzu izv�lieties pakotnes, ko v�laties instal�t"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "No�emt rindu"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "No�emt Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Lietot�ja v�rds"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "L�dzu notest�jiet peli"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "L�dzu m��iniet v�lreiz"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "L�dzu m��iniet v�lreiz"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Bez paroles"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN piesl�gums"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Izv�lieties printera piesl�gumu"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "L�dzu izv�lieties j�su tastat�ras izk�rtojumu."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "L�dzu uzklik��iniet uz part�cijas"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "L�dzu izv�lieties pakotnes, ko v�laties instal�t"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "L�dzu notest�jiet peli"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "T�kla interfeiss"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Lietot�ja v�rds"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "L�dzu izv�lieties pakotnes, ko v�laties instal�t"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "L�dzu izv�lieties izmantojamo valodu."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Ciet� diska noteik�ana"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Lietot�ja v�rds"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Ritenis"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Ritenis"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Modu�a opcijas:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "T�kla konfigur�cija"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "L�dzu izv�lieties pakotnes, ko v�laties instal�t"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "L�dzu izv�lieties pakotnes, ko v�laties instal�t"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Failu sist�mu uzst�d��ana"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcijas"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "L�dzu nor�diet, kuram seri�lajam portam ir piesl�gts mod�ms."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "T�kla konfigur�cija"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "L�dzu izv�lieties j�su peles tipu."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Atjanot no disketes"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "L�dzu izv�lieties j�su peles tipu."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Cits"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Sist�mas instal��ana"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Atjaunot no faila"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Atjaunot no faila"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Piel�gota"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Pal�dz�ba"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Atpaka�"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "St�voklis:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Atjaunot no faila"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "T�l�k ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Instal�jamo pakot�u izv�le"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "L�dzu izv�lieties izmantojamo valodu."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "L�dzu izv�lieties izmantojamo valodu."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "L�dzu izv�lieties izmantojamo valodu."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Saglab�t fail�"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "L�dzu notest�jiet peli"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "L�dzu izv�lieties pakotnes, ko v�laties instal�t"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "T�kla konfigur�cija"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "T�kla konfigur�cija"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "LAN konfigur�cija"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "LAN konfigur�cija"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Failu sist�mu uzst�d��ana"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s uzst�d��ana neizdev�s. Uzrad�s ��da k��da:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "t�kla karte nav atrasta"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Izdar�ts"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Disketes format��ana"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Sagatavoju instal��anu"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "ierobe�ot"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "ierobe�ot"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Diska format��ana"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "LAN konfigur�cija"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Mont��anas punkts"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Izv�lieties part�cijas, ko v�laties format�t"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Birojs"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "P�rtraukt"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Printeris"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Sist�mas instal��ana"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Izv�lieties failu"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Att�ls printeris"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "J�su sist�m� nav t�kla adaptera!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instal�t"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "J�su sist�m� nav t�kla adaptera!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Instal��anas beigas"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Interneta piesl�guma koplieto�ana"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Interneta piesl�guma koplieto�ana pa�laik ir iesl�gta"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneta piesl�guma koplieto�ana jau ir uzst�d�ta.\n"
-"Pa�laik t� ir iesl�gta.\n"
-"\n"
-"Ko j�s v�laties dar�t?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "atsl�gt"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "atmest"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "p�rkonfigur�t"
-
-#: ../../standalone/drakgw_.c:146
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Noskaidroju ier�ces..."
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Interneta piesl�guma koplieto�ana pa�laik ir atsl�gta"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Interneta piesl�guma koplieto�ana pa�laik ir atsl�gta"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneta piesl�guma koplieto�ana jau ir uzst�d�ta.\n"
-"Pa�laik t� ir atsl�gta.\n"
-"\n"
-"Ko j�s v�laties dar�t?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "iesl�gt"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Interneta piesl�guma koplieto�ana pa�laik ir iesl�gta"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Datoru var konfigur�t t�, lai kop�gi izmantotu Interneta piesl�gumu.\n"
-"\n"
-"Piez�me: jums ir nepiecie�ams atsevi��s t�kla adapteris, lai uzst�d�tu "
-"lok�lo datort�klu (LAN).\n"
-"\n"
-"Vai v�laties uzst�d�t Interneta piesl�guma koplieto�anu?"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Interfeiss"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "J�su sist�m� nav t�kla adaptera!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"J�su sist�m� nav atrasts neviens ethernet t�kla adapteris. L�dzu izmantojiet "
-"dzel�u konfigur��anas r�ku."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "T�kla interfeiss"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"J�su sist�m� ir tikai viens konfigur�ts t�kla adapteris:\n"
-"\n"
-"%s\n"
-"\n"
-"Vai v�laties uzst�d�t j�su lok�lo datort�klu ar �o adapteri?"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"L�dzu izv�lieties, kur� t�kla adapteris b�s piesl�gts j�su lok�lajam "
-"datort�klam."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitors nav konfigur�ts"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "S�kn��anas stila konfigur��ana"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Interneta konfigur�cija"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS servera IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Potenci�ls LAN adre�u konflikts atkl�ts �aj� %s! konfigur�cij�!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Tika atkl�ta ugunsm�ra konfigur�cija!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Br�din�jums! Ir atkl�ta eksist�jo�a ugunsm�ra konfigur�cija. P�c "
-"instal��anas jums varb�t vajadz�s patst�v�gi pielabot konfigur�ciju."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigur�ju..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Tiek konfigur�ti skripti, instal�tas programmas, start�ti serveri..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probl�mas, instal�jot pakotni %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Viss ir konfigur�ts.\n"
-"Tagad j�s varat dal�ties Interneta piesl�gum� ar citiem j�su lok�lajam\n"
-"datort�klam piesl�gtiem datoriem, izmantojot autom�tisku t�kla "
-"konfigur��anu\n"
-"(DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-#, fuzzy
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Interneta piesl�guma koplieto�ana jau ir uzst�d�ta.\n"
-"Pa�laik t� ir atsl�gta.\n"
-"\n"
-"Ko j�s v�laties dar�t?"
-
-#: ../../standalone/drakgw_.c:690
-#, fuzzy
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Interneta piesl�guma koplieto�ana jau ir uzst�d�ta.\n"
-"Pa�laik t� ir iesl�gta.\n"
-"\n"
-"Ko j�s v�laties dar�t?"
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Interneta piesl�guma koplieto�ana pa�laik ir iesl�gta"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Interneta piesl�gums un konfigur�cija"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Interneta piesl�guma koplieto�ana"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "T�kla konfigur�cija (%d adapteri)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profils: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Dz�st profilu..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Dz��amais profils:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Jauns profils..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Resursa v�rds: "
-
-#
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Interneta pieeja"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tips:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "V�rteja:"
-
-#
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "interfeiss:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "St�voklis:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfigur�t Interneta pieeju..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN konfigur�cija"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Draiveris"
-
-#
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfeiss"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Protocol"
-msgstr "Protokols"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "St�voklis:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfigur�t lok�lo datort�klu..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Meistars..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Konfigur�cijas izm��in��ana"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Nav piesl�gts"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nav piesl�gts"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN konfigur�cija"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapteris %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klients"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Akt�va"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Akt�va"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Interneta piesl�guma konfigur�cija"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Interneta piesl�guma konfigur�cija"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Savienojuma tips: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "V�rteja"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet karte"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klients"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Uzst�du dro��bas l�meni"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Piesl�gties Internetam"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Izv�lieties izmantojamo r�ku"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kan�das (Kvebeka)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Eiropa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandes"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Eiropa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "seri�la"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "pielietojums: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "L�dzu izv�lieties j�su tastat�ras izk�rtojumu."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vai v�laties, lai BackSpace konsol� darbotos k� Delete?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Nomainiet Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"L�dzu ielieciet instal�cijas Cd-Rom un nospiediet Labi, kad tas izdar�ts.\n"
-"Ja jums nav �� diska, nospiediet Atcelt, lai neuzs�ktu uzlabo�anu no t�kla."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Neizdodas uzs�kt uzlabo�anu no t�kla !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "R�d�t tikai par �odienu"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fails/_Jauns"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fails/_Atv�rt"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fails/_Saglab�t"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fails/Saglab�t _k�"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fails/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcijas"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcijas/Tests"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Pal�dz�ba"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Pal�dz�ba/_Par..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Lietot�ja v�rds"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "zi�ojumi"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "mekl�t"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "R�ks �urn�lu p�rl�ko�anai"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Uzst�d�jumi"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "sakr�t"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "bet nesakr�t"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Izv�litesis failu"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalend�rs"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Faila saturs"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "l�dzu gaidiet, analiz�ju failu: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "LAN konfigur�cija"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Iziet"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "ier�ce"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Format�ju"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Konfigur�cija"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Saglab�t k�..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "L�dzu izv�lieties j�su peles tipu."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nav atrasta seri�la_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Vai emul�t tre�o pogu?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Izv�lieties grafisko karti"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "S�kn�jam� ier�ce"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Tika atkl�ta ugunsm�ra konfigur�cija!"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Tika atkl�ta ugunsm�ra konfigur�cija!"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Valodas izv�le"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Instal��anas klases izv�le"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Ciet� diska noteik�ana"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Peles konfigur��ana"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Tastat�ras izv�le"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Failu sist�mu uzst�d��ana"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Diska format��ana"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Instal�jamo pakot�u izv�le"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Sist�mas instal��ana"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Lietot�ju pievieno�ana"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "T�kla konfigur��ana"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Servisu konfigur��ana"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "S�kn�t�ja instal��ana"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Sist�mdisketes rad��ana"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X konfigur��ana"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Sist�mas instal��ana"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Instal��anas beigas"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Adapteris %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "K��da, atverot %s ierakst��anai: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "T�kla konfigur��anas meistars"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "L�dzu gaidiet, gatavoju instal�ciju"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Serveris, T�meklis/FTP"
-
-#
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "T�kla dators, X klients"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Birojs"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome darbastacija"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "R�ki darbam ar Palm Pilot vai Visor"
-
-#
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "KDE darbastacija"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Serveris, Ugunsm�ris/Mar�rutizators"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Biroja programmas: teksta procesori (kword, abiword), izkl�jlapas (lspread, "
-"gnumeric), pdf skat�t�ji, u.c."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio r�ki: mp3 un midi atska�ot�ji, mik�eri u.c."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Gr�matas un Howto faili par Linux un Br�vo programmat�ru"
-
-#
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE darbastacija"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm u.c."
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multim�diji - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "R�ki pastam, jaunumiem, t�meklim, failu sa�em�anai un �atam"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Serveris, Datub�zes"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Vai v�laties izm��in�t �o konfigur�ciju?"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multim�diji - Ska�a"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Util�ti"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokument�cija"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsoles r�ki"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Interneta dators"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multim�diju dators"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN konfigur�cija"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Citas grafiskas darbavirsmas (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, galven� grafisk� vide kopa ar papildus r�ku kolekciju"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "R�ki CD disku rad��anai un ierakst��anai"
-
-#
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Biroja dators"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "serveris"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm u.c."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafisk�s programmas, piem�ram, The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C un C++ izstr�des bibliot�kas, programmas un include faili"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Serveris, T�kla datora serveris"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Serveris, Pasts/Grupu r�ki/Jaunumi"
-
-#
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Sp��u dators"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video atska�ot�ji un redaktori"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multim�diji - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Izklaides programmas: ark�de, galdi�sp�les, strat��ija u.c."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"R�ku komplekts, lai las�tu un s�t�tu pastu vai jaunumus (pine, mutt, tin..) "
-"un p�rl�kotu T�mekli"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhiv��ana, emulatori, nov�ro�ana"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Person�g�s finanses"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafisk� vide ar lietotajiem draudz�gu programmu komplektu un darbavirsmas "
-"r�kiem"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Interneta pieeja"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Ska�as un video atska�o�anas/redi���anas programmas"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Citas grafisk�s darbavirsmas"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redaktori, �aulas, failu r�ki, termin��i"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmas j�su finan�u p�rvald��anai, piem�ram, gnucach"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Person�g�s inform�cijas mened�ments"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multim�diji - CD ierakst��ana"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Zin�tnisk� darbastacija"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "P�rtraukt"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Nevienu"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Nor�diet noklus�to lietot�ju:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Att�ls printeris"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Tagad j�s varat nor�d�t parametrus modulim %s."
-
-#~ msgid "Low"
-#~ msgstr "Zems"
-
-#~ msgid "Medium"
-#~ msgstr "Vid�js"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Da�i uzlabojumi �im dro��bas l�menis, un galvenais ir tas, ka tagad ir\n"
-#~ "vair�k dro��bas br�din�jumu un p�rbau�u."
-
-#~ msgid "mount failed"
-#~ msgstr "mont��ana neizdev�s"
-
-#~ msgid "Boot mode"
-#~ msgstr "S�kn��anas re��ms"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Eksperta"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux laiku r��ina p�c GMT jeb \"Gr�ni�as Meridi�na Laika\" un "
-#~ "p�rv�r�\n"
-#~ "to par viet�jo laiku atbilsto�i j�su izv�l�tajai laika joslai."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Piesl�gties Internetam"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Atsl�gties no Interneta"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Konfigur�t t�kla piesl�gumu (LAN vai Interneta)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Uz kuru disku v�laties to p�rvietot?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "L�dzu izv�lieties pakotnes, ko v�laties instal�t"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Info"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome darbastacija"
-
-#~ msgid "authentification"
-#~ msgstr "autentifik�cija"
-
-#~ msgid "user"
-#~ msgstr "lietot�js"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "Skan�ju piejamos nfs kop�gos resursus"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "Skan�ju piejamos nfs kop�gos resursus uz servera %s"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "Skan�ju piejamos samba kop�gos resursus"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "Skan�ju piejamos samba kop�gos resursus uz servera %s"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "L�dzu izv�lieties j�su peles tipu."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Iziet"
-
-#~ msgid "Removable media"
-#~ msgstr "Iz�emams datu nes�js"
-
-#~ msgid "Active"
-#~ msgstr "Akt�va"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "N�"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Printeris, modelis \"%s\", atrasts pie "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Lok�l� printera ier�ce"
-
-#~ msgid "Printer Device"
-#~ msgstr "Printera ier�ce"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Att�ls CUPS serveris"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Att�ls CUPS serveris"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Sist�mas re��ms"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Cits"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "L�dzu izv�lieties j�su tastat�ras izk�rtojumu."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "L�dzu uzklik��iniet uz part�cijas"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tips: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Slikts rezerves kopijas fails"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "X konfigur��ana"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Printera ier�ce"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Atcelt"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Labi"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Pele"
-
-#
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "toot"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "Izm��inu piesl�gumu..."
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "Izm��inu piesl�gumu..."
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "Sist�ma pa�laik ir piesl�gta Internetam."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Nor�diet apjomu, ko v�laties instal�t"
-
-#~ msgid "Total size: "
-#~ msgstr "Kop�jais izm�rs: "
-
-#~ msgid "Please wait, "
-#~ msgstr "L�dzu uzgaidiet, "
-
-#~ msgid "Total time "
-#~ msgstr "Kop�jais laiks"
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Vai izmantot jau eso�o X11 konfigur�ciju?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Kurai ier�cei ir piesl�gts printeris\n"
-#~ "(atcerieties, ka /dev/lp0 atbilst LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#, fuzzy
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Br�din�jums, t�kla adapteris jau ir konfigur�ts.\n"
-#~ "Vai v�laties to konfigur�t atk�rtoti?"
-
-#~ msgid "New"
-#~ msgstr "Jauns"
-
-#~ msgid "Remote"
-#~ msgstr "Att�la"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "L�dzu uzklik��iniet uz part�cijas"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Nenoteikt�ba (%s), esiet prec�z�ks\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (noklus�ti %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "J�su izv�le? (noklus�ti %s  ievadiet `none', ja nav) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "las��anai nevar atv�rt /etc/sysconfig/autologin: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Vai v�laties p�rstart�t t�klu"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Vai j�s piekr�tat?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Gatavojos p�rstart�t t�kla ier�ci:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Gatavojos p�rstart�t t�kla ier�ci %s. Vai piekr�tat?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Ja vien j�s neesat p�rliecin�ts par citu izv�li, parasti ir j�izv�las\n"
-#~ "\"/dev/hda\" (prim�rais galvenais IDE disks) vai \"/dev/sda\" (pirmais\n"
-#~ "SCSI disks)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Savienojuma tips: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Nor�diet noklus�to lietot�ju:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "L�dzu notest�jiet peli"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "L�dzu nor�diet v�lamo instal��anas un sist�mas izmanto�anas valodu."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Lai turpin�tu instal��anu, jums ir j�pie�em ��s licences nosac�jumi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nospiediet \"Pie�emt\", ja piekr�tat nosac�jumiem.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nospiediet \"Noraid�t\", ja nepiekr�tat nosac�jumiem. Instal��ana tiks "
-#~ "p�rtraukta bez pa�reiz�j�s\n"
-#~ "konfigur�cijas izmai��m."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Sarakst� nor�diet j�su tastat�rai atbilsto�u izk�rtojumu"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Ja v�laties, lai citas valodas (iz�emot to, ko nor�d�j�t instal��anas\n"
-#~ "s�kum�) b�tu pieejamas p�c instal��anas, l�dzu nor�diet t�s augst�k\n"
-#~ "eso�aj� sarakst�. Ja v�laties izmantot visas, nospiediet \"Viss\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Izv�lieties:\n"
-#~ "\n"
-#~ "  - Piel�gota: Ja pietiekami labi p�rzinat GNU/Linux, jums tiks dota\n"
-#~ "    iesp�ja nor�d�t sist�mu pielietojumu. S�k�ka inform�cija b�s\n"
-#~ "    pieejam v�l�k.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Eksperta: Noder�s, ja j�s labi p�rzinat GNU/Linux un v�laties veikt\n"
-#~ "    prec�zi piel�gotu instal�ciju. T�pat k� piel�gotas instal�cijas\n"
-#~ "    gad�jum�, jums tiks dota iesp�ja nor�d�t sist�mas pielietojumu.\n"
-#~ "    Tom�r l�dzu, NEIZV�LIETIES �O, JA J�S NEESAT P�RLIECIN�TS PAR\n"
-#~ "    SAVU R�C�BU!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Tagad jums ir j�nor�da ma��nas pielietojums. Varat izv�l�ties:\n"
-#~ "\n"
-#~ "* Darbastacija: �� ir ide�la izv�le, ja pl�nojat sist�mu galvenok�rt "
-#~ "izmantot ikdienas vajadz�b�m biroj� vai m�j�s.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Izstr�dei: ja pl�nojat sist�mu izmantot galvenok�rt programmat�ras "
-#~ "izstr�dei, �� ir laba izv�le. �aj�\n"
-#~ " gad�jum� tiks instal�ts pilns programmu komplekts, lai j�s var�tu "
-#~ "kompil�t, atk��dot un format�t s�kumkodu vai\n"
-#~ " veidot programmat�ras pakotnes.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Serveris: ja pl�nojat sist�mu izmantot k� serveri, �� ir laba izv�le. "
-#~ "Tas var b�t failu serveris (NFS vai\n"
-#~ " SMB), drukas serveris (Unix stila vai Microsoft Windows stila), "
-#~ "autentific��anas serveris (NIS),\n"
-#~ " datub�zu serveris utt. �aj� gad�jum� neceriet, ka tiks instal�ti k�di "
-#~ "izskaistin�jumi (KDE, GNOME, un tml.)."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Tagad varat izv�l�ties instal�jamo vai uzlabojamo pakot�u grupu.\n"
-#~ "\n"
-#~ "\n"
-#~ "P�c tam DrakX p�rbaud�s, vai pietiek vietas to visu instal��anai.\n"
-#~ "Ja nav vietas, j�s br�din�s par to. Ja v�laties turpin�t, neskatoties\n"
-#~ "uz to, izv�l�to grupu instal��ana turpin�sies, ta�u tiks izlaistas\n"
-#~ "da�as maz�k noder�gas pakotnes. Saraksta apak�� varat izv�l�ties\n"
-#~ "opciju \"Atsevi��u pakot�u izv�le\"; �aj� gad�jum� jums vajadz�s\n"
-#~ "caurskat�t vair�k nek� 1000 pakot�u sarakstu..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Tagad j�s varat atsevi��i izv�l�ties visas pakotnes, ko gribat "
-#~ "insrtal�t.\n"
-#~ "\n"
-#~ "\n"
-#~ "J�s varat izv�str vai sak�aut koku, noklik��inot uz opcij�m pakot�u loga\n"
-#~ "kreisaj� st�r�.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja j�s v�laties redz�t visas sakotnes sak�rtotas alfab�ta sec�b�,\n"
-#~ "noklik��iniet uz ikonas \"Sak�rtots vien� sarakst� vai pa grup�m\"\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja j�s nev�laties, lai j�s br�dina par atkar�b�m, noklik��iniet uz\n"
-#~ "\"Autom�tiskas atkar�bas\". Ja j�s t� izdar�t, �emiet v�r�, ka "
-#~ "atteik�an�s\n"
-#~ "no vienas pakotnes var izsaukt atteik�anos no vair�k�m cit�m pakotn�m,\n"
-#~ "kas ir no t�s atkar�gas."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Ja jums ir visi �aj� sarakst� nor�d�tie CD, nospiediet Labi.\n"
-#~ "Ja jums nav neviena no nor�d�tajiem CD, nospiediet Atcelt.\n"
-#~ "Ja tr�kst tikai da�u CD, sarakst� atsl�dziet tos un nospiediet Labi."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Ja v�laties savu datoru piesl�gt Internetam vai lok�lam datort�klam,\n"
-#~ "l�dzu izv�lieties pareizu opciju. L�dzu vispirms iesl�dziet attiec�gu\n"
-#~ "ier�ci, pirms izv�laties opciju, lai DrakX noteiktu to autom�tiski.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jums nav nek�da piesl�guma Internetam vai lok�lam datort�klam,\n"
-#~ "izv�lieties \"Atsl�gt t�klu\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja j�s v�laties konfigur�t t�klu v�l�k p�c instal��anas, vai ar� esat\n"
-#~ "jau pabeigu�i konfigur�t j�su t�kla piesl�gumu, izv�lieties \"Izdar�ts\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Mod�ms nav atrasts. L�dzu nor�diet, kuram seri�lajam portam tas "
-#~ "piesl�gts.\n"
-#~ "\n"
-#~ "\n"
-#~ "J�su zin��anai, pirmais seri�lais ports (ko Microsoft Windows sauc par\n"
-#~ "\"COM1\") Linux vid� tiek saukts par \"ttyS0\"."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Tagad j�s varat ievad�t iezvanpieejas opcijas. Ja j�s nezinat vai neesat\n"
-#~ "p�rliecin�ts, ko ievad�t, pareizu inform�ciju var sa�emt no j�su "
-#~ "Interneta\n"
-#~ "pakalpojumu sniedz�ja. Ja j�s �eit neievad�t DNS (v�rdu servera) "
-#~ "inform�ciju,\n"
-#~ "�� inform�cija tiks ieg�ta no j�su Interneta pakalpojumu sniedz�ja\n"
-#~ "piesl�g�an�s laik�."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Ja jums ir �r�js mod�ms, l�dzu iesl�dziet to un �aujiet DrakX to noteikt "
-#~ "autom�tiski."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "L�dzu iesl�dziet j�su mod�mu un nor�diet pareizo modeli."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Ja j�s neesat p�rliecin�ts, vai augst�k eso�� inform�cija ir pareiza, "
-#~ "vai\n"
-#~ "ar� j�s nezinat vai neesat p�rliecin�ts, ko ievad�t, pareizu inform�ciju\n"
-#~ "var sa�emt no j�su Interneta pakalpojumu sniedz�ja. Ja j�s �eit "
-#~ "neievad�t\n"
-#~ "DNS (v�rdu servera) inform�ciju, �� inform�cija tiks ieg�ta no j�su\n"
-#~ "Interneta pakalpojumu sniedz�ja piesl�g�an�s laik�."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Tagad varat ievad�t j�su datora v�rdu, ja tas nepiecie�amas.\n"
-#~ "Ja j�s to nezinat vai neesat p�rliecin�ts, ko ievad�t, pareizu "
-#~ "inform�ciju\n"
-#~ "var sa�emt no j�su Interneta pakalpojumu sniedz�ja."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Tagad varat konfigur�t t�kla ier�ci.\n"
-#~ "\n"
-#~ "   * IP adrese: ja to nezinat vai neesat p�rliecin�ts, pajaut�jiet t�kla "
-#~ "administratoram.\n"
-#~ "     Jums nav j�ievada IP adrese, ja zem�k izv�laties \"Autom�tisks IP"
-#~ "\".\n"
-#~ "\n"
-#~ "  - T�klamaska: \"255.255.255.0\" parasti ir laba izv�le. Ja nezinat vai "
-#~ "neesat p�rliecin�ts, pajaut�jiet\n"
-#~ "t�kla administratoram.\n"
-#~ "\n"
-#~ "  - Autom�tisks IP: ja j�su datort�kls izmanto BOOTP vai DHCP protokolu, "
-#~ "izv�lieties �o opciju. Kad t� izv�l�ta,nnav j�nor�da \"IP addrese\". Ja "
-#~ "nezinat vai neesat p�rliecin�ts, pajaut�jiet t�kla administratoram."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Tagad varat ievad�t j�su datora v�rdu, ja tas nepiecie�amas.\n"
-#~ "Ja j�s to nezinat vai neesat p�rliecin�ts, pajaut�jiet t�kla "
-#~ "administratoram."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Tagad varat ievad�t j�su datora v�rdu, ja tas nepiecie�ams.\n"
-#~ "Ja nezinat vai neesat p�rliecin�ts, atst�jiet tuk�u."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Tagad j�s varat ievad�t iezvan��an�s opcijas. Ja j�s nezinat, ko "
-#~ "ievad�t,\n"
-#~ "vajadz�go inform�ciju var sa�emt no j�su ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Ja j�s izmantosit proxy serverus, l�dzu konfigur�jiet tos. Ja j�s\n"
-#~ "nezinat, vai izmantosit proxy, pajaut�jiet t�kla administratoram vai\n"
-#~ "savam ISP."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Ja j�su Interneta piesl�gums ir konfigur�ts pareizi, j�s varat instal�t\n"
-#~ "kriptogr�fijas pakotnes. Vispirms nor�diet spogu�serveri, no kura\n"
-#~ "iel�d�t pakotnes, tad izv�lieties instal�jam�s pakotnes.\n"
-#~ "\n"
-#~ "\n"
-#~ "Atcerieties, ka spogu�serveris un kriptogr�fijas pakotnes ir j�izv�las\n"
-#~ "atbilsto�i j�su valsts likumdo�anai."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Tagad varat nor�d�t laika joslu, kur� j�s dz�vojat."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "J�s varat konfigur�t lok�lu printeri (kas piesl�gts j�su datoram) vai\n"
-#~ "att�lu printeri (pieejami Unix, Netware vai Microsoft Windows t�kl�)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Ja j�s v�laties izmantot printeri, izv�lieties vienu no drukas sist�m�m "
-#~ "- \n"
-#~ "CUPS vai LRP.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS ir jauna, jaud�ga un elast�ga drukas sist�ma Unix sist�m�m (CUPS\n"
-#~ "noz�m� \"Common Unix Printing System\"). �� ir noklus�t� Mandrake Linux\n"
-#~ "drukas sist�ma.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR ir vec� drukas sist�ma, kas tika izmantota iepriek��j�s Mandrake "
-#~ "Linux\n"
-#~ "versij�s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jums nav printera, izv�lieties \"Neviens\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux var str�d�t ar da��diem printeru tipiem. Katram no �iem tipiem\n"
-#~ "ir nepiecie�ama at��ir�gi uzst�d�jumi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja j�su printeris ir fiziski piesl�gts j�su datoram, izv�lieties "
-#~ "\"Lok�ls\n"
-#~ "printeris\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja j�s v�laties piek��t printerim, kas ir piesl�gts att�lam Microsoft\n"
-#~ "Windows datoram (vai Unix datoram, kas izmanto SMB protokolu), "
-#~ "izv�lieties\n"
-#~ "\"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "L�dzu iesl�dziet j�su printeri, pirms turpin�t un �aut DrakX to noteikt.\n"
-#~ "\n"
-#~ "�eit jums ir j�ievada noteikta inform�cija.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printera nosaukums: drukas spol�t�js izmanto \"lp\" k� noklus�to "
-#~ "printera nosaukumu, t�p�c jums ir j�b�t\n"
-#~ "     printerim, kas saucas \"lp\". Ja jums ir tikai viens printeris, j�s "
-#~ "varat tam pie��irt vair�kus nosaukumus.\n"
-#~ "     Nosaukumi ir j�atdala ar vertik�las sv�tras simbolu (\"|\"). "
-#~ "T�d�j�di, ja j�s gribat izmantot saprotam�ku\n"
-#~ "     nosaukumu, j�s to varat nor�d�t pirmo, piem�ram, \"Mans printeris|lp"
-#~ "\". Printeris, kura nosaukum� ir \"lp\",\n"
-#~ "     b�s noklus�tais printeris.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Apraksts: nav oblig�ts, bet var noder�t, ja j�su datoram ir "
-#~ "piesl�gti vair�ki printeri, vai ar� j�s gribat\n"
-#~ "     at�aut citiem datoriem piesl�gties j�su printerim.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Atra�an�s vieta: ja gribat, varat sniegt inform�ciju par j�su "
-#~ "printera\n"
-#~ "     atra�an�s vietu (�eit j�s varat rakst�t visu, ko v�laties, "
-#~ "piem�ram,\n"
-#~ "     \"otraj� st�v�\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "�eit jums ir j�ievada noteikta inform�cija.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Rindas nosaukums: drukas spol�t�js izmanto \"lp\" k� noklus�t� "
-#~ "printera nosaukumu, t�p�c jums ir j�b�t\n"
-#~ "     printerim, kas saucas \"lp\". Ja jums ir tikai viens printeris, j�s "
-#~ "varat tam pie��irt vair�kus nosaukumus.\n"
-#~ "     Nosaukumi ir j�atdala ar vertik�las sv�tras simbolu (\"|\"). "
-#~ "T�d�j�di, ja j�s gribat izmantot saprotam�ku\n"
-#~ "     nosaukumu, j�s to varat nor�d�t pirmo, piem�ram, \"Mans printeris|lp"
-#~ "\". Printeris, kura nosaukum� ir \"lp\",\n"
-#~ "     b�s noklus�tais printeris.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Spol��anas katalogs: tie�i �aj� katalog� tiek glab�ti drukas "
-#~ "uzdevumi. Ja nezinat, ko ievad�t,\n"
-#~ "     atst�jiet noklus�to v�rt�bu\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printera piesl�gums: Ja j�su printeris fiziski ir piesl�gts j�su "
-#~ "datoram, izv�lieties \"Lok�ls printeris\".\n"
-#~ "     Ja j�s v�laties piek��t printerim, kas piesl�gts att�lam Unix "
-#~ "datoram, izv�lieties \"Att�ls lpd printeris\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Ja j�s v�laties izmantot printeri, kas piesl�gts att�lam Microsoft "
-#~ "Windows datoram (vai Unix datoram, kas\n"
-#~ "     izmanto SMB protokolu), izv�lieties \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Ja j�s v�laties izmantot printeri, kas atrodas NetWare t�kl�, "
-#~ "izv�lieties \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "J�su printeris nav atrasts. L�dzu ievadiet ier�ces nosaukumu, kurai tas "
-#~ "ir\n"
-#~ "piesl�gts.\n"
-#~ "\n"
-#~ "\n"
-#~ "J�su zin��anai, vairums printeru ir piesl�gti pirmajam paral�lajam "
-#~ "portam.\n"
-#~ "�o portu GNU/Linux vid� sauc par \"/dev/lp0\" bet Microsoft Windows vid�\n"
-#~ "par \"LPT1\"."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Tagad jums ir j�izv�l�s printeri no augst�k eso�� saraksta."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "L�dzu izv�lieties j�su printerim atbilsto�as opcijas.\n"
-#~ "Izlasiet dokument�ciju, ja nezinat, ko izv�l�ties.\n"
-#~ "\n"
-#~ "\n"
-#~ "N�kamaj� sol� j�s var�sit p�rbaud�t izv�l�to konfigur�ciju un izmain�t "
-#~ "to,\n"
-#~ "ja printeris nedarbosies pareizi."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Tagad varat ievad�t j�su Mandrake Linux sist�mas root paroli.\n"
-#~ "Parole ir j�ievada divas reizes, lai p�rliecin�tos, ka abas kopijas\n"
-#~ "sakr�t un j�s neesat k��d�jies.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root ir sist�mas administrators un vien�gais lietot�js, kam ir at�auts\n"
-#~ "izmain�t sist�mas konfigur�ciju. �� iemesla d�� r�p�gi izv�lieties �o\n"
-#~ "paroli! Neautoriz�ta root konta izmanto�ana var b�t �oti b�stama\n"
-#~ "sist�mas integrit�tei, t�s datiem un cit�m tai piesl�gtaj�m sist�m�m.\n"
-#~ "\n"
-#~ "\n"
-#~ "Parolei ir j�b�t vismaz 8 simbolus garai burtu un ciparu kombin�cijai.\n"
-#~ "To nekad nevajadz�tu pierakst�t uz pap�ra.\n"
-#~ "\n"
-#~ "\n"
-#~ "Neizv�lieties p�r�k garu vai sare���tu paroli: jums to ir\n"
-#~ "j�sp�j atcer�ties bez p�r�k lielas piep�les."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Tagad j�s varat pievienot vienu vai vair�kus \"parastu\" lietot�ju\n"
-#~ "kontus k� pretstatu \"privili��ta\" lietot�ja kontam root. Varat "
-#~ "izveidot\n"
-#~ "vienu vai vair�kus kontus katrai personai, kam b�s at�auts izmantot\n"
-#~ "j�su datoru. Atcerieties, ka katram lietot�ja kontam ir sava\n"
-#~ "konfigur�cija (grafisk� vide, programmu konfigur�cija un tml.) un savs\n"
-#~ "\"m�jas katalogs\", kur� �� konfigur�cija tiek glab�ta.\n"
-#~ "\n"
-#~ "\n"
-#~ "Vispirms izveidojiet kontu pats sev! Pat ja j�s b�sit vien�gais\n"
-#~ "datora lietot�js, j�s NEDR�KSTAT ikdien� lietot root kontu: tas ir �oti\n"
-#~ "liels dro��bas risks. �oti bie�i tikai da�i nepareizi nodruk�ti burti\n"
-#~ "var padar�t j�su sist�mu nelietojamu.\n"
-#~ "\n"
-#~ "\n"
-#~ "�� iemesla d�� jums j�iere�istr�jas sist�m�, izmantojot lietot�ja kontu,\n"
-#~ "ko j�s t�l�t izveidosit, un j�iere�istr�jas k� root tikai "
-#~ "administr��anas\n"
-#~ "un uztur��anas uzdevumu veik�anai."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Ir �oti ieteicams izveidot s�kn��anas disketi. Ja jums neizdosies "
-#~ "start�t\n"
-#~ "savu datoru, t� b�s vien�gais veids, k� to izgl�bt bez p�rinstal��anas."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO un grub galven�s opcijas ir:\n"
-#~ "  - S�kn��anas ier�ce: Nor�da ier�ces nosaukumu (t.i., ciet� diska\n"
-#~ "part�ciju), uz kuras atrodas s�kn��anas sektors. Ja vien neesat\n"
-#~ "p�rliecin�ts par ko citu, izv�lieties \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauze pirms noklus�t� att�la s�kn��anas: Nor�da laiku sekundes\n"
-#~ "desmitda��s, ko s�kn�t�js gaida pirms pirm� att�la iel�des.\n"
-#~ "Tas ir ieteicams sist�m�m, kas s�kn�jas tie�i no ciet� diska t�l�t p�c\n"
-#~ "tastat�ras aktiviz��anas. S�kn��ana s�kas bez pauzes, ja \"pauze\" nav\n"
-#~ "nor�d�ta vai ir nulle.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video re��ms: Tas nor�da VGA teksta re��mu, kas tiek izv�l�ts\n"
-#~ "s�kn��anas laik�. Ir pieejamas sekojo�as v�rt�bas: \n"
-#~ "    * norm�ls: izv�las norm�lu 80x25 teksta re��mu.\n"
-#~ "    * <skaitlis>:  izmanto atbilsto�u teksta re��mu."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO ir s�kn�t�js SPARC sist�m�m: tas sp�j s�kn�t GNU/Linux\n"
-#~ "vai jebkuru citu oper�t�jsist�mu, kas ir uzst�d�ta j�su dator�.\n"
-#~ "Parasti citas oper�t�jsist�mas tiek korekti noteiktas un instal�tas.\n"
-#~ "Ja t� nenotiek, j�s �aj� ekr�n� varat ar roku pievienot ierakstu. Esiet\n"
-#~ "uzman�gs, izv�loties pareizus parametrus.\n"
-#~ "\n"
-#~ "\n"
-#~ "J�s varb�t ar� v�laties ne�aut nevienam piek��t p�r�j�m "
-#~ "oper�t�jsist�m�m,\n"
-#~ "un �aj� gad�jum� j�s varat izdz�st attiec�gos ierakstus. Bet �aj�\n"
-#~ "gad�jum� jums b�s nepiecie�ama s�kn��anas diskete, lai t�s s�kn�tu!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO galven�s opcijas ir:\n"
-#~ "  - S�kn�t�ja instal��ana: Nor�da, kur j�s v�laties novietot "
-#~ "inform�ciju,\n"
-#~ "kas nepiecie�ama GNU/Linux s�kn��anai. Ja vien neesat p�rliecin�ts\n"
-#~ "par ko citu, izv�lieties \"Diska pirmais sektors (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauze pirms noklus�t� att�la s�kn��anas: Nor�da laiku sekundes\n"
-#~ "desmitda��s, ko s�kn�t�js gaida pirms pirm� att�la iel�des.\n"
-#~ "Tas ir ieteicams sist�m�m, kas s�kn�jas tie�i no ciet� diska t�l�t p�c\n"
-#~ "tastat�ras aktiviz��anas. S�kn��ana s�kas bez pauzes, ja \"pauze\" nav\n"
-#~ "nor�d�ta vai ir nulle."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Ir pien�cis laiks konfigur�t X Window System, kas ir GNU/Linux GUI\n"
-#~ "(grafisk� lietot�ja interfeisa) pamats. Lai to izdar�tu, jums ir\n"
-#~ "j�konfigur� video karte un monitors. Tom�r vairums no �iem so�iem ir\n"
-#~ "automatiz�ti, t�p�c j�su uzdevums var b�t tikai p�rbaud�t izdar�to\n"
-#~ "izv�li un apstiprin�t parametrus :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kad konfigur��ana ir pabeigta, tiks start�ts X (ja vien j�s\n"
-#~ "nel�dzat DrakX to nedar�t), lai j�s p�rbaud�tu un apskat�tu, vai\n"
-#~ "parametri j�s apmierina. Ja tie neder, j�s varat atgriezties un tos\n"
-#~ "nomain�t tik reizes, cik b�s nepiecie�ams."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Ja ar X konfigur�ciju kaut kas nav k�rt�b�, izmantojiet ��s opcijas,\n"
-#~ "lai pareizi konfigur�tu X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Ja dodat priek�roku darba uzs�k�anai grafisk� re��m�, izv�lietis \"J�\",\n"
-#~ "cit�di izv�lieties \"N�\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "J�su sist�ma tiks p�rstart�ta.\n"
-#~ "\n"
-#~ "P�c p�rstart��anas j�su jaun� Mandrake Linux sist�ma tiks iel�d�ta\n"
-#~ "autom�tiski. Ja v�laties s�kn�t k�du citu jau uzst�d�tu oper�t�jsist�mu,\n"
-#~ "l�dzu izlasiet papildus nor�d�jumus."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "�ehijas (programm�t�ju)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slov�kijas (programm�t�ju)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Veidojam� profila nosaukums:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Ierakst�t /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Format�t visu"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "P�c visu part�ciju format��anas"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "visi ��j�s part�cij�s eso�ie dati tiks pazaud�ti"
-
-#~ msgid "Reload"
-#~ msgstr "P�rl�d�t"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Vai v�laties izveidot auto instal��anas disketi linux replik�cijai?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL konfigur�cija"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Izmantojot att�lu CUPS serveri, �eit jums nav nepiecie�ams\n"
-#~ "konfigur�t nevienu printeri. Printeri tiks atrasti autom�tiski,\n"
-#~ "ja vien serveris nav piesl�gts citam t�klam; t�d� gad�jum� jums\n"
-#~ "ir j�nor�da CUPS servera IP adrese un, iesp�jams, porta numurs."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Att�l� rinda"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Dom�na nosaukums"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Nav printera"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "T�kla konfigur�cija"
-
-#~ msgid "Profile "
-#~ msgstr "Profils "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Savienojuma tips: "
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Piesl�gties Internetam"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Atsl�gties no Interneta"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Atsl�gties no Interneta"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Atsl�gties no Interneta"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Savienojuma nosaukums"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Noklus�ts"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Konfigur�cijas faila saturu neizdodas saprast."
-
-#~ msgid "Adapter"
-#~ msgstr "Adapteris"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Atsl�gt"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Iesl�gt"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Tagad varat izm��in�t peli. Izmantojiet pogas un riteni, lai\n"
-#~ "p�rliecin�tos, ka konfigur�cija ir pareiza. Ja nav, varat nospiest\n"
-#~ "\"Atcelt\" un izv�l�ties citu draiveri."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (vai ADSL) piesl�gums"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Pele"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "J�s varat tie�i nor�d�t URI, lai piek��tu printerim ar CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "J�, izdruk�t ASCII izm��in�juma lapu"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "J�, izdruk�t PostScript izm��in�juma lapu"
-
-#~ msgid "Paper Size"
-#~ msgstr "Pap�ra izm�rs"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Vai izmest lapu p�c izdrukas?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint draivera opcijas"
-
-#~ msgid "Color depth options"
-#~ msgstr "Kr�su dzi�uma opcijas"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Druk�t tekstu k� PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Vai labot teksta k�p�veida izdruku?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Lappu�u skaits vien� izdrukas lap�"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Lab�/Kreis� mala punktos (1/72 collas da��s)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Aug��j�/Apak��j� mala punktos (1/72 collas da��s)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Papildus GhostScript opcijas"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Papildus teksta opcijas"
-
-#~ msgid "Reverse page order"
-#~ msgstr "A�g�rna lappu�u sec�ba"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Izv�lieties att�la printera piesl�gumu"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Katram printerim ir nepiecie�ams nosaukums (piem�ram, lp).\n"
-#~ "Var nor�d�t ar� citus parametrus, piem�ram, printera aprakstu vai t�\n"
-#~ "atra�an�s vietu. K�du nosaukumu pie��irt �im printerim, un k�d� veid�\n"
-#~ "printeris ir piesl�gts?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Katrai drukas rindai (uz kuru tiek adres�ti drukas uzdevumi) ir "
-#~ "nepiecie�ams\n"
-#~ "nosaukums (bie�i lp) un tai piesaist�ts spol��anas katalogs. K�du "
-#~ "nosaukumu\n"
-#~ "un katalogu izmantot �ai rindai un k� ir piesl�gts printeris?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Rindas nosaukums"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spol��anas katalogs"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Lai palielin�tu sist�mas dro��bu, izv�lieties \"Izmantot shadow failu\"\n"
-#~ "un \"Izmantot MD5 paroles\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Ja j�su t�kl� lieto NIS, izv�lieties \"Izmantot NIS\". Ja j�s to nezinat\n"
-#~ "pajaut�jiet savam t�kla administratoram."
-
-#~ msgid "yellow pages"
-#~ msgstr "dzelten�s lapas"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "LAN konfigur�cija"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Pakalpojumu sniedz�ja dns 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Pakalpojumu sniedz�ja dns 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "K� j�s v�laties piesl�gties Internetam?"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Izv�lieties failu"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Izm��inu piesl�gumu..."
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Konfigur�ju..."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "�is start��anas skripts m��ina iel�d�t modu�us j�su usb pelei."
-
-#~ msgid "Boot style configuration"
-#~ msgstr "S�kn��anas stila konfigur��ana"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Tagad, kad ir konfigur�ts j�su Interneta piesl�gums,\n"
-#~ "datoru var konfigur�t t�, lai kop�gi izmantotu Interneta piesl�gumu.\n"
-#~ "Piez�me: jums ir nepiecie�ams atsevi��s t�kla adapteris, lai uzst�d�ti "
-#~ "lok�lo datort�klu (LAN).\n"
-#~ "\n"
-#~ "Vai v�laties uzst�d�t Interneta piesl�guma koplieto�anu?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Autom�tiskas atkar�bas"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "LILO/GRUB konfigur��ana"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "S�kn��anas disketes rad��ana"
-
-#~ msgid "Choice"
-#~ msgstr "Izv�le"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horizont�la jauka izskata aurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "vertik�la tradicion�la aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitors"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Tagad varat izv�l�ties da��das sist�mas opcijas.\n"
-#~ "\n"
-#~ "* Izmantot ciet� diska optimiz�cijas: �� opcija var uzlabot ciet� diska   "
-#~ "veiktsp�ju, ta�u t� ir paredz�ta tikai pieredz�ju�iem lietot�jiem:\n"
-#~ "  da�as k��dainas mikrosh�mas var izn�cin�t j�su datus, t�p�c j�s esat   "
-#~ "br�din�ts. Atcerieties, ka kodol� ir ieb�v�ts disku un mikrosh�mu\n"
-#~ "  melnais saraksts, tom�r, ja v�laties iztikt bez nepat�kamiem\n"
-#~ "  p�rsteigumiem, neizv�lieties �o opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Izv�lieties dro��bas l�meni: j�s varat izv�l�ties sist�mas dro��bas\n"
-#~ "  l�meni. Piln�gu inform�ciju mekl�jiet rokasgr�mat�. Parasti, ja\n"
-#~ "  nezinat, atst�jiet noklus�to v�rt�bu.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Prec�zs RAM apjoms, ja nepiecie�ams: diem��l m�sdienu datoru\n"
-#~ "  pasaul� nav vienotas metodes, k� pajaut�t BIOSam par j�su dator�\n"
-#~ "  uzst�d�t�s atmi�as apjomu. Rezult�t� Linux ne vienm�r pareizi\n"
-#~ "  nosaka j�su datora RAM apjomu. Ja t� notiek, j�s �eit varat\n"
-#~ "  nor�d�t pareizu RAM apjomu. �emiet v�r�, ka 2 vai 4 MB at��ir�ba\n"
-#~ "  ir norm�la.\n"
-#~ "\n"
-#~ "* Nomain�mu datu nes�ju automont��ana: ja nev�laties katru reizi mont�t\n"
-#~ "  nomain�mus datu nes�jus (CD-ROM, disketi, Zip u.c.), druk�jot \"mount"
-#~ "\"   un \"umount\", izv�lieties �o opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Izt�r�t \"/tmp\" katras s�kn��anas laik�: ja j�s v�laties sist�mas   "
-#~ "s�kn��anas laik� izdz�st visus failus un\n"
-#~ "  katalogus, kas atrodas \"/tmp\", izv�lieties �o opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Iesl�gt NumLock palai�anas laik�: ja v�laties, lai p�c s�kn��anas   "
-#~ "b�tu iesl�gts NumLock, izv�lieties �o\n"
-#~ "  opciju. �emiet v�r�, ka to nevajadz�tu izv�l�ties kl�pjdatoriem, un "
-#~ "ka   NumLock var str�d�t vai nestr�d�t X vid�."
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Atvainojiet, pasta konfigur��ana v�l nav realiz�ta. Esiet paciet�gi."
-
-#
-#~ msgid "Internet/Network access"
-#~ msgstr "Internets/Pieeja t�klam"
-
-#, fuzzy
-#~ msgid "Miscellaneous"
-#~ msgstr "Da��di jaut�jumi"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Da��di jaut�jumi"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Nevar izmantot supermount augst� dro��bas l�men�"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "�emiet v�r�: PIE �� DRO��BAS L�ME�A ROOT SESIJAS ATV�R�ANA NO KONSOLES\n"
-#~ "NAV AT�AUTA! Ja v�laties b�t root, jums vispirms ir j�atver parasta\n"
-#~ "lietot�ja sesija un tad j�izmanto \"su\". Visp�r�gi run�jot, neceriet\n"
-#~ "izmantot savu datoru kam citam k� vien servera uzdevumiem.\n"
-#~ "J�s esat br�din�ts."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Esiet uzman�gs, numlock iesl�g�ana liek daudziem tausti�iem parasto\n"
-#~ "burtu viet� r�d�t ciparus (piem�ram, `p' nospie�ana dod `6')"
-
-#~ msgid "not connected"
-#~ msgstr "nav piesl�gts"
-
-#, fuzzy
-#~ msgid "Actions"
-#~ msgstr "Atra�an�s vieta"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Zin�tnisk�s programmas"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Serveris, Failu/Drukas/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Serveris, DNS/DHCP"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Pirmais DNS serveris"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Otrais DNS serveris"
-
-#~ msgid "using module"
-#~ msgstr "izmantojot moduli"
-
-#
-#~ msgid "Development, Database"
-#~ msgstr "Izstr�de, Datub�ze"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Izstr�de, Integr�t� vide"
-
-#
-#~ msgid "Development, Standard tools"
-#~ msgstr "Izstr�de, Standartr�ki"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Kuru(s) s�kn�t�ju(s) v�laties izmantot?"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
diff --git a/perl-install/share/po/mt.po b/perl-install/share/po/mt.po
deleted file mode 100644
index cdf4678f3..000000000
--- a/perl-install/share/po/mt.po
+++ /dev/null
@@ -1,12071 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# Ramon Casha <ramon.casha@linux.org.mt>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-10 18:12CET\n"
-"Last-Translator: Ramon Casha <ramon.casha@linux.org.mt>\n"
-"Language-Team: Maltese <mt@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Ikkonfigura l-heads kollha independentement"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Uża estensjoni Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Ikkonfigura l-kard \"%s\" (%s) biss"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Konfigurazzjoni multi-head"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Is-sistema tiegħek tissaporti konfigurazzjoni \"multi-head\".\n"
-"Xi trid tagħmel?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Kard grafika"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Agħżel kard grafika"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Agħżel server X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Agħżel driver"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Driver X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Liema konfigurazzjoni ta' XFree trid li jkollok?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Il-kard tiegħek tista' tagħmel użu minn aċċelerazzjoni 3D, imma b' XFree %s "
-"biss.\n"
-"Il-kard tiegħek hija magħrufa minn XFree %s, li jista' jkollu sapport aħjar "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Il-kard tiegħek tista' tagħmel użu minn aċċelerazzjoni 3D b' XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s b'aċċelerazzjoni 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Il-kard tiegħek tista' tagħmel użu minn aċċelerazzjoni 3D b' XFree %s.\n"
-"DIN HIJA FAĊILITÀ SPERIMENTALI U TISTA' TWAĦĦAL IL-KOMPJUTER."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s b'aċċelerazzjoni 3D ESPERIMENTALI"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Il-kard tiegħek tista' tagħmel użu minn aċċelerazzjoni 3D b' XFree %s.\n"
-"DIN HIJA FAĊILITÀ SPERIMENTALI U TISTA' TWAĦĦAL IL-KOMPJUTER.\n"
-"Il-card tiegħek hija magħrufa minn XFree %s, li jista' jkollu sapport aħjar "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (driver tal-iskrin għall-installazzjoni)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Konfigurazzjoni XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Agħżel id-daqs tal-memorja tal-kard tal-grafika"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Ikkonfigura għażliet tas-server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Agħżel skrin"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Skrin"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Iż-żewġ parametri kritiċi huma frekwenza vertikali (vertical refresh rate), "
-"li\n"
-"hija r-rata li biha l-iskrin sħiħ jiġi aġġornat, u iżjed importanti il-"
-"frekwenza\n"
-"orizzontali (horizontal refresh rate), li hija r-rata li biha jiġu aġġornati "
-"l-linji.\n"
-"\n"
-"Huwa importanti ħafna li ma tistpeċifikax skrin b'rata iżjed mgħaġġla milli\n"
-"kapaċi juri l-iskrin tiegħek, għax tista' tagħmillu l-ħsara.\n"
-"Jekk għandek xi dubju, agħżel valur żgħir."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Frekwenza orizzontali"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Frekwenza vertikali"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Skrin mhux issettjat"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Kard grafika għad m'hix issettjata"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Reżoluzzjoni għadha ma ngħażlitx"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Trid tittestja din il-konfigurazzjoni?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Twissija: it-test ta' din il-kard grafika jista' jwaħħal il-kompjuter"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test tal-konfigurazzjoni"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ipprova ibdel xi parametri"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Instabet problema:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Ħiereġ f' %d sekondi"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Dan is-seting huwa tajjeb?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Instabet problema. Ipprova ibdel xi parametri"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Reżoluzzjoni"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Agħżel reżoluzzjoni u finezza ta' kuluri"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Kard grafika: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Iżjed"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modalità esperti"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Uri kollox"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Reżoluzzjonijiet"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tqassim tat-tastiera: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tip ta' maws: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Apparat maws: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Skrin: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frek.Orizzontali Skrin: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frek. Vertikali Skrin: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Kard grafika: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikazzjoni tal-kard grafika: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memorja grafika: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Numru ta' kuluri: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Reżoluzzjoni: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Server XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Driver XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Qed nipprepara l-konfigurazzjoni X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "X'tixtieq tagħmel?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Nibdel l-iskrin"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Nibdel il-kard grafika"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Nibdel l-għażliet tas-server"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Nibdel ir-reżoluzzjoni"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Nara l-informazzjoni"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Nerġa' nittestja"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Noħroġ"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Trid iżżomm il-bidliet?\n"
-"Il-konfigurazzjoni kurrenti hija:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X fil-bidu"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Nista' nissettja l-kompjuter biex awtomatikament jidħol f' X malli jitla'.\n"
-"Trid ittella' X Windows meta tixgħel?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Jekk jogħġbok oħroġ u erġa' idħol fuq %s biex tara l-bidliet."
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Jekk jogħġbok oħroġ mid-desktop u agħfas Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kuluri (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 elf kulur (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 elf kulur (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljun kulur (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 biljun kulur (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB jew iżjed"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA standard, 640x480 b' 60Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 b' 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514/kompatibbli, 1024x768 b' 87 Hz interlaced (ma jieħux 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 b' 87 Hz interlaced, 800x600 b' 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA estiż, 800x600 b' 60 Hz, 640x480 b' 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA mhux interlaced, 1024x768 b' 60 Hz, 800x600 b' 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA frekwenza għolja, 1024x768 b' 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekwenza li jiflaħ 1280x1024 b' 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekwenza li jiflaħ 1280x1024 b' 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekwenza li jiflaħ 1280x1024 b' 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Skrin li jiflaħ 1600x1200 b' 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Skrin li jiflaħ 1600x1200 b' 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "L-ewwel settur tal-partizzjoni \"boot\""
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "L-ewwel settur tal-ħard disk (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Installazzjoni SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Fejn tixtieq tinstalla l-\"bootloader\"?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Installazzjoni LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO b'menu testwali"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO b'menu grafiku"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Tella' minn DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Għażliet prinċipali tal-bootloader"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Liema bootloader tuża"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Installazzjoni tal-bootloader"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Diska/apparat \"boot\""
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ma jaħdimx ma' kompjuters antiki)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Żgħir"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Konfigurazzjoni video"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Stennija qabel ittella' l-għażla impliċita"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Password"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Password (erġa')"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Irrestrinġi l-għażliet tal-linja tal-kmand"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "restrict"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Clean /tmp kull meta tixgħel"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Daqs eżatt ta' memorja jekk meħtieġ (sibt %d RAM)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Ippermetti profili differenti"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Agħti d-daqs tar-RAM f'MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"L-għażla \"irrestrinġi l-għażliet tal-linja tal-kmand\" m'għandha ebda "
-"effett minngħajr password"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Erġa' pprova"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Il-passwords ma jaqblux"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Messaġġ tal-bidu"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Stennija Open Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Skadenza tal-ħin għall-kernel boot"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Ippermetti boot mis-CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Ippermetti Boot OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "OS Impliċitu?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hawn huma l-elementi differenti>\n"
-"Tista' żżid iżjed jew tibdel dawk li hemm."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Żid"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Lest"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Biddel"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Liema tip ta' sistema operattiva trid iżżid?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "OS ieħor (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "OS ieħor (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "OS ieħor (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Żid fl-aħħar"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Ikteb-aqra"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabella"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Mhux sikur"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Isem"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Impliċitu"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Daqs ta' initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "EbdaVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Neħħi element"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Isem vojt mhux aċċettat"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Trid tispeċifika \"image\" tal-kernel"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Trid tispeċifika partizzjoni \"root\""
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Dan l-isem diġà qed jintuża"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Sibt %s interfaċċji %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Għandek iżjed?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Il-kompjuter għandu interfaċċji %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Le"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Iva"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ara info. dwar ħardwer"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Qed ninstalla driver għal %s kard %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modulu %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Liema driver %s tridni nipprova?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"F'ċerti każi id-driver %s ikollu bżonn iżjed informazzjoni biex jaħdem\n"
-"sew, għalkemm is-soltu jaħdem sew mingħajrha. Trid tispeċifika xi\n"
-"informazzjoni lid-driver, jew tħallih ifittex l-apparat waħdu? Kulltant, "
-"it-\n"
-"tfittix iġiegħel lill-kompjuter jeħel, imma dan m'għandux jagħmel ħsara."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Fittex"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Speċifika informazzjoni"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Tista' tipprovdi l-għażliet lill-modulu %s.\n"
-"L-għażliet għandhom il-format \"isem=valur isem=valur ...\".\n"
-"Per eżempju, \"io=0x300 irq=7\"."
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Għażliet tal-modulu:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Il-modulu %s ma rnexxielux jitla'.\n"
-"Trid terġa' tipprova b'parametri oħra?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "aċċess għall-programmi X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "aċċess għall-għodda rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "ippermetti \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "aċċess għall-fajls amministrattivi"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s diġà miżjud)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Dan il-password sempliċi wisq"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Jekk jogħġbok agħti isem ta' user"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"L-isem tal-user jista' jkun fih biss ittri żgħar, numri, \"-\" u \"_\"."
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Dan l-isem ta' user diġà jeżisti"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Żid user"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Daħħal dettalji ta' user\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aċċetta user"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Isem veru"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Isem tal-user"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Stampa"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Awto-login"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Nista' nissettja l-kompjuter biex awtomatikament jagħmel login fuq user "
-"wieħed.\n"
-"Trid tissettja din il-faċilità?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Agħżel il-user impliċitu:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Agħżel liema \"window manager\" trid tħaddem:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Agħżel liema lingwa trid tuża."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Tista' tagħżel lingwi oħra li jkun u disponibbli wara li tinstalla"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Kollha"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Ippermetti l-users kollha"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personalizzat"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Ebda offerti (sharing)"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Irid jiġi nstallat il-pakkett %s. Tridni ninstallah?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Tista' toffri direttorji bl-NFS jew Samba. Liema trid?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Pakkett meħtieġ %s huwa nieqes"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Ikkanċella"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Ħaddem userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Id-direttorju offruti (file sharing) għall-users juża l-\n"
-"grupp \"fileshare\". Tista' tuża userdrake biex iżżid\n"
-"users ma' dan il-grupp."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bieb miftuħ beraħ!"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Ftit li xejn"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Tajjeb"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Tajjeb ħafna"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoiku"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Oqgħod attent jekk tuża dan il-livell. Il-kompjuter tiegħek jista' ikun iżed "
-"faċli tużah, imma jkun vulnerabbli ħafna. Qatt m'għandu jintuża fuq "
-"kompjuter imqabbad ma' oħrajn permezz ta' network jew ma' l-internet. Ma "
-"hemm ebda password."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Il-passwords issa huma mixgħula, imma l-użu fuq l-internet jew network xorta "
-"m'hux rakkomandat."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Dan huwa s-seting rakkomandat jekk se tuża dan il-kompjuter fuq l-internet "
-"bħala klijent."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Diġà hemm xi restrizzjonijiet, u iżjed testijiet awtomatiċi jitħaddmu kuljum "
-"bil-lejl."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"B'dan il-livell ta' sigurtà jsir possibbli li tuża dan il-kompjuter bħala "
-"server.\n"
-"Is-sigurtà hija għolja biżżejjed biex jintuża bħala server li jaċċetta "
-"konnessjonijiet\n"
-"minn ħafna kompjuters oħra. Jekk int se tuża l-kompjuter bħala klijent biss, "
-"jew biex taċċessa l-internet, jaqbillek livell iżjed baxx."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Ibbażat fuq il-livell ta' qabel, imma issa s-sistema hija magħluqa għal "
-"kollox.\n"
-"Is-setinga tas-sigurtà qegħdin fil-massimu."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Agħżel livell ta' sigurtà"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Livell ta' sigurtà"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Uża libsafe għas-servers"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Din hija librerija li tipproteġi kontra attakki \"buffer overflow\" u "
-"\"fomat string\"."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Merhba ghal %s - ghazla ta' sistema operattiva\n"
-"\n"
-"Aghzel sistema operattiva mil-lista ta' fuq, jew\n"
-"stenna %d sekondi ghall-ghazla implicita\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Merhba ghal GRUB - ghazla ta' sistema operattiva"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Uza l-buttuni %c u %c biex taghzel liema element huwa mmarkat."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Aghfas Enter biex tibda' s-sistema operattiva mmarkata, 'e' biex tbiddel"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "il-kmand qabel tibda', jew 'c' ghal linja ta' kmand."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "L-ghazla mmarkata se tinbeda' awtomatikament f' %d sekondi"
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "M'hemmx biżżejjed spazju fuq /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ma tistax tinstalla l-bootloader fil-partizzjoni %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "għad m'hemmx għajnuna implementata.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfigurazzjoni ta' l-istil ta' boot"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fajl"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fajl/O_ħroġ"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor NewStyle bil-kategoriji"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor tradizzjonali"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor tradizzjonali Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Ħaddem Aurora mal-boot"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Modalità lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Modalità yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Bħalissa qed tuża %s bħala BootManager.\n"
-"Klikkja \"ikkonfigura\"\" biex tħaddem il-konfiguratur."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Ikkonfigura"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Modalità sistema"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Ħaddem X-Windows malli titla'"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Le, ma rridx awto-login"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Iva, rrid awto-login b'dan il-user u desktop"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Ma nistax niftaħ /etc/inittab għall-qari: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuti"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "minuta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekondi"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Ma nistax nieħu ritratti tal-iskrin qabel toħloq il-partizzjonijiet"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Ir-ritratti jkunu disponibbli wara l-installazzjoni f' %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Franza"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Kosta Rika"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belġju"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Repubblika Kżeka"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Ġermanja"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Greċja"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norveġja"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Svezja"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Netherlands"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italja"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Awstrija"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Stati Uniti"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Ħu \"backup\" tal-informazzjoni qabel tkompli"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Aqra sew!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jekk bi ħsiebek tuża aboot, kun ċert li tħalli spazju fil-bidu tad-diska "
-"(2048 setturi biżżejjed)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Problema"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Saħħar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Agħżel azzjoni"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Għandek partizzjoni waħda kbira FAT\n"
-"(ġeneralment użata minn Microsoft DOS/Windows).\n"
-"Nissuġġerixxi li l-ewwel iċċekken dik il-partizzjoni\n"
-"(klikkja fuqha, u agħfas \"ibdel daqs\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Jekk jogħġbok klikkja fuq partizzjoni"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Dettalji"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Vojt"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Oħrajn"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipi ta' filesystem"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Oħloq"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tip"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Uża \"%s\" minnflok"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Ħassar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "L-ewwel agħfas \"żmonta\""
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Jekk tibdel it-tip ta' partizzjoni %s, l-informazzjoni kollha li hemm fuqha "
-"tintilef"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Agħżel partizzjoni"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Agħżel partizzjoni oħra"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Oħroġ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Idħol f'modalità għal esperti"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Lura f'modalità normali"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Annulla"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Trid tkompli xorta?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Oħroġ minngħajr ma tikteb"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Trid toħroġ minngħajr ma tikteb it-tabella tal-partizzjonijiet?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Trid tikteb il-modifiki għal /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Awto-allokazzjoni"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Neħħi kollox"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informazzjoni dwar il-ħard disk"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Il-partizzjonijiet primarji kollha mimlijin"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ma nistax inżid iżjed partizzjonijiet"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Biex iżżid iżjed partizzjonijiet, trid tħassar waħda milli hemm biex tkun "
-"tista' toħloq partizzjoni estiża"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Ikteb it-tabella ta' partizzjonijet"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Erġa tella' tabella ta' partizzjonijiet"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Salva tabella ta' partizzjonijiet"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Erġa' aqra t-tabella ta' partizzjonijiet"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Awto-muntar ta' diski li jinħarġu"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Agħżel fajl"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Il-tabella tal-partizzjonijiet għall-backup m'għandiex l-istess daqs.\n"
-"Tkompli xorta?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Twissija"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Daħħal floppy fid-drive\n"
-"Kull ma hemm fuq il-floppy se jitħassar"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Qed nipprova nsalva t-tabella ta' partizzjonijiet"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Informazzjoni dettaljata"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Post għall-immontar"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Għażliet"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Ibdel daqs"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Mexxi"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formattja"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Immonta"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Żid ma' RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Żid ma' LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Żmonta"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Neħħi mir-RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Neħħi mill-LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Biddel RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Uża bħala loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Oħloq partizzjoni ġdida"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Settur tal-bidu: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Daqs f' MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tip ta' filesystem: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punt ta' mmuntar: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferenzi: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Trid tneħħi l-fajl ta' loopback?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Ibdel tip ta' partizzjoni"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Liema filesystem trid?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Qed nibdel minn ext2 għal ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Fejn trid timmonta l-fajl ta' loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Fejn trid timmonta d-diska %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ma nistax inneħħi l-punt ta' mmuntar għax din il-partizzjoni qed tintuża "
-"għal loopback.\n"
-"L-ewwel neħħiha minn loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Qed nikkalkula l-limiti tal-filesystem FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Qed nibdel id-daqs"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Din il-partizzjoni ma tistax tinbidel id-daqs tagħha"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"L-informazzjoni kollha fuq din il-partizzjoni għandha tiġi kkupjata fuq "
-"backup"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Wara li tibdel id-daqs tal-partizzjoni %s, l-informazzjoni kollha fuqha "
-"tintilef"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Agħżel id-daqs il-ġdid"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Daqs ġdid f'MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Fuq liema diska trid tmexxiha?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Settur"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Fuq liema settur trid tmexxiha?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Qed titmexxa"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Qed jitmexxa l-partizzjoni..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Agħżel RAID eżistenti biex iżżid miegħu"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "ġdid"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Agħżel LVM eżistenti biex iżżid miegħu"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Isem tal-LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Din il-partizzjoni ma tistax tintuża għal loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Isem ta' fajl għal loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Agħti isem ta' fajl"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Fajl diġà qed jintuża minn loopback ieħor, agħżel ieħor"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Fajl diġà jeżisti. Tuża lilu?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Għażliet għall-immuntar"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Varji"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "apparat"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "livell"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "daqs ta' \"chunk\""
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Oqgħod attent: dan il-proċess huwa perikoluż."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "X'tip ta' partizzjoni?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Jiddispjaċini, ma nistax noħloq /boot daqshekk 'il quddiem fid-diska (fuq "
-"ċilindru > 1024).\n"
-"Jekk tuża l-LILO din ma taħdimx, jekk ma tużax il-LILO ma jkollokx bżonn "
-"partizzjoni /boot."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Il-partizzjoni li għażilt bħala root (/) fiżikament qegħda fuq ċilindru wara "
-"l-1024 \n"
-"fuq id-diska, u m'għandekx partizzjoni /boot. Jekk se tuża l-bootmanager "
-"LILO, \n"
-"kun ċert li toħloq partizzjoni /boot, li tkun qabel ċilindru 1024."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Int għażilt partizzjoni software-RAID bħala root (/).\n"
-"Ebda bootloader m'hu kapaċi jħaddem dan mingħajr partizzjoni /boot.\n"
-"Għalhekk aċċerta li jkollok partizzjoni /boot mhux fuq ir-RAID."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "It-tabella tal-partizzjonijiet tad-diska %s se tinkiteb fuq id-diska."
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Trid tirributja sabiex il-bidliet ikollhom effett."
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Wara li tifformattja l-partizzjoni %s, l-informazzjoni kollha fuqha tintilef."
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Qed nifformattja"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Qed nifformattja fajl ta' loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Qed nifformattja partizzjoni %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Aħbi fajls"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Mexxi fajls għal partizzjoni ġdida"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Id-direttorju %s diġà fih xi fajls\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Qed jitmexxew il-fajls għal partizzjoni ġdida"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Qed nikkopja %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Qed inneħħi %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partizzjoni %s issa magħrufa bħala %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Apparat: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Ittra tad-diska fid-DOS: %s (probabbli)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tip: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Isem: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Bidu: settur %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Daqs: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s setturi"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Ċilindri %d sa %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formattjat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Mhux formattjat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Immuntat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Fajl/s ta' loopback:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partizzjoni li tibda' impliċitament\n"
-"    (għad-DOS/Windows, mhux għal-lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Livell %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Daqs ta' \"chunk\" %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Diski RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Isem ta' fajl loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Aktarx, din il-partizzjoni\n"
-"hija partizzjoni ta' Driver,\n"
-"jaqbillek tħalliha kif inhi.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Din il-partizzjoni speċjali\n"
-"\"bootstrap\" qegħda biex\n"
-"tagħżel os meta tixgħel.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Daqs: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ġeometrija: %s ċilindri, %s heads, %s setturi\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Diski LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tip ta' tabella tal-partizzjonijiet: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "fuq bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Għażliet: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Ċavetta taċ-ċifrazzjoni tal-filesystem (password)"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Agħżel ċavetta għaċ-ċifrazzjoni tal-filesystem"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Din iċ-ċavetta taċ-ċifrazzjoni huwa sempliċi wisq (irid ikun twil tal-inqas %"
-"d ittri)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Il-muftieħ taċ-ċifrar ma jaqbilx"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Ċavetta taċ-ċifrazzjoni"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Ċavetta taċ-ċifrazzjoni (darb' oħra)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Ibdel tip"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Jekk jogħġbok klikkja fuq mezz"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Fittex servers"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formattjar ta' %s falla"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ma nafx kif nifformattja %s b'tip %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck falla b'kodiċi %d jew sinjal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "problema fl-iżmuntar ta' %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "sempliċi"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "b' /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ma tistax tuża JFS għal partizzjonijiet iżgħar minn 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ma tistax tuża ReiserFS għal partizzjonijiet iżgħar minn 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Punti ta' mmuntar iridu jibdew b' /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Diġà hemm partizzjoni b'punt ta' mmuntar %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ma tistax tuża volum loġiku LVM għall-punt ta' mmuntar %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Dan id-direttorju irid jibqa' fil-filesystem root."
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Għandek bżonn filesystem vera (ext2, reiserfs) għal dan il-punt ta' mmuntar\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Ma tistax tuża filesystem iċċifrat għall-punt ta' mmuntar %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "M'hemmx biżżejjed spazju għal awto-allokazzjoni"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "M'hemm xejn x'nagħmel"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Problema waqt il-ftuħ ta' %s għall-kitba: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Instabet problema - ebda apparat validu ma nstab fejn jinħolqu filesystems "
-"ġodda. Iċċekkja l-kompjuter għall-kawża ta' din il-problema."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "M'għandek ebda partizzjoni!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux hija sistema operattiva \"multi-user\", u dan ifisser li l-users \n"
-"kollha jista' jkollhom il-preferenzi tagħhom, fajls personali eċċ. Tista'\n"
-"taqra l-\"User Guide\" għal iżjed tagħrif. Imma, kontra tal-user \"root\",\n"
-"li huwa l-amministratur, il-users li żżid hawn ma jkunu jistgħu jibdlu xejn\n"
-"ħlief il-fajls u konfigurazzjoni personali tagħhom. Inti trid toħloq ta' \n"
-"l-inqas user regolari wieħed għalik. Dan huwa l-user li bih għandek tagħmel\n"
-"ix-xogħol ta' kuljum. Filwaqt li jista' jkun iżed faċli tuża l-user \"root"
-"\" \n"
-"ta' kuljum, dan huwa perikoluż ħafna. L-iċken żball jista' jwaqqaf is-"
-"sistema\n"
-"milli taħdem. Jekk tagħmel anke żball serju b'user regolari, tista' titlef "
-"xi \n"
-"informazzjoni imma mhux is-sistema sħiħa.\n"
-"\n"
-"L-ewwel trid iddaħħal l-isem veru tiegħek. Dan mhux bilfors, ovvjament, u\n"
-"fil-fatt tista' ddaħħal li trid. DrakX imbgħad jieħu l-ewwel kelma u "
-"ipoġġiha\n"
-"fl-\"isem tal-user\". Dan huwa l-isem li jintuża biex tidħol fis-sistema. \n"
-"Tista' tibdel dan l-isem, imbgħad daħħal password. Filwaqt li l-password "
-"ta'\n"
-"user regolari mhux kruċjali daqs tar-root, dejjem jaqbillek tagħżel "
-"password\n"
-"tajjeb - ftakar li hemm il-fajls tiegħek fin-nofs.\n"
-"\n"
-"Jekk tagħfas \"Aċċetta user\", tista' żżid users oħra kemm hemm bżonn. "
-"Tista' żżid users għal ħutek, it-tfal jew ġenituri, jew lill-ħbieb, per "
-"eżempju. \n"
-"Meta tlesti milli żżid il-users kollha li trid, agħfas \"Lest@.\n"
-"\n"
-"Jekk tagħfas il-buttuna \"Avvanzat\", tkun tista' tbiddel ix-\"shell\" \n"
-"impliċita tal-user, li normalment tkun \"bash\"."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Hawn fuq issib il-partizzjonijiet ta' Linux li nstabu fuq id-diska. Tista' \n"
-"żżomm l-għażliet li għamel is-saħħar, huma tajbin għal ħafna każi.\n"
-"Jekk tagħmel tibdiliet, trid ta' l-inqas tiddefinixxi partizzjoni root (\"/"
-"\")\n"
-"Tagħżilx daqs żgħir wisq inkella ma tkunx tista' tinstalla l-programmi\n"
-"kollha li jkollok bżonn. Jekk tixtieq iżżomm l-informazzjoni fuq "
-"partizzjoni\n"
-"separata, trid toħloq ukoll partizzjoni għal \"/home\" (għal dan irid "
-"ikollok\n"
-"iżjed minn partizzjoni waħda Linux).\n"
-"\n"
-"Kull partizzjoni hija mniżżla b'dan il-mod: \"Isem\", \"Daqs\".\n"
-"\n"
-"L-isem huwa mqassam hekk: \"tip ta' diska\", \"numru ta' diska\", \"numru\n"
-"tal-partizzjoni\", per eżempju, \"hda1\". \n"
-"\n"
-"It-tip ta' diska huwa \"hd\" jekk id-diska hija tip IDE, u \"sd\" jekk "
-"hija \n"
-"tip SCSI.\n"
-"\n"
-"In-numru tad-diska huwa l-ittra ta' wara \"hd\" jew \"sd\". Għal diski IDE,\n"
-"\"a\" hija d-diska \"master\" fuq il-kontrollatur IDE primarju,\n"
-"\"b\" hija d-diska skjav fuq il-kontrollatur IDE primarju,\n"
-"\"c\" hija d-diska \"master\" fuq il-kontrollatur IDE sekondarju,\n"
-"\"d\" hija d-diska skjav fuq il-kontrollatur IDE sekondarju\n"
-"\n"
-"Fuq diski SCSI, \"a\" hija d-diska bl-iżjed ID baxx, \"b\" hija t-tieni, eċċ."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"L-installazzjoni ta' Mandrake Linux hija maqsuma fuq diversi CD-ROMs. DrakX\n"
-"jaf jekk pakkett partikulari hux qiegħed fuq CD-ROM oħra u jiftaħ is-CD u \n"
-"jindikalek biex iddaħħal li jmiss skond il-ħtieġa."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Issa wasal il-mument fejn tagħżel liema programmi tixtieq tinstalla fuq\n"
-"is-sistema tiegħek. Hemm eluf ta' pakketti disponibbli għal Mandrake Linux,\n"
-"u m'għandekx għalfejn tkun tafhom kollha.\n"
-"\n"
-"Jekk se tagħmel installazzjoni standard mis-CD-ROM, l-ewwel tiġi mistoqsi\n"
-"liema CDs għandek (modalità esperta biss). Iċċekkja t-tikketti tas-CDs u \n"
-"immarka l-kaxex li jikkorrispondu għas-CDs li għandek. Klikkja \"Ok\" meta\n"
-"tkun lest biex tkompli.\n"
-"\n"
-"Il-pakketti huma mqassma fi gruppi li jikkorrespondu għat-tip ta' użu tal-\n"
-"kompjuter. Il-gruppi stess huma mqassma f'erba' sezzjonijiet:\n"
-"\n"
-" * \"Workstation\": jekk fi ħsiebek tuża l-kompjuter bħala workstation, \n"
-"agħżel wieħed jew iżjed mill-gruppi li tixtieq.\n"
-"\n"
-"\n"
-" * \"Żviluppar\": jekk tixtieq tuża l-kompjuter biex tipprogramma, agħżel\n"
-"il-gruppi li trid.\n"
-" * \"Server\": jekk il-kompjuter huwa intenzjonat bħala server. tista' "
-"tagħżel\n"
-"l-iżjed servizzi komuni li tixtieq tinstalla fuq il-magna.\n"
-"\n"
-" * \"Ambjent Grafiku\": finalment, dan huwa fejn tagħżel l-ambjent grafiku "
-"li\n"
-"tippreferi. Ta' l-inqas trid tagħżel wieħed minn dawn jekk trid li jkollok \n"
-"ambjent grafiku.\n"
-"\n"
-"Jekk tmexxi l-maws fuq wieħed mill-ismijiet tara deskrizzjoni qasira dwar "
-"dak\n"
-"il-grupp. Jekk tneħħi l-gruppi kollha meta qed tagħmel installazzjoni "
-"regolari\n"
-"(mhux aġġornament), titla' window fejn tista' tagħżel tip ta' "
-"installazzjoni \n"
-"minima:\n"
-"\n"
-"\" * \"Bl-XWindows\" tinstalla s-sistema bażika flimkien ma' l-minimu ta'\n"
-"pakketti għal sistema grafika;\n"
-"\n"
-" * \"B'dokumentazzjoni bażika\" tinstalla s-sistema bażika flimkiem ma' xi\n"
-"programmi sempliċi u d-dokumentazzjoni tagħhom. Dan huwa tajjeb għal "
-"server.\n"
-"\n"
-" * \"Installazzjoni vera minima\" tinstalla strettament l-inqas pakketti \n"
-"possibbli sabiex ikollok Linux b'linja ta' kmand. Din l-installazzjoni "
-"tieħu\n"
-"biss madwar 65MB.\n"
-"\n"
-"Tista' tittikkja \"Għażla ta' pakketti individwali\", li huwa utli jekk int\n"
-"familjari mal-pakketti offruti jew jekk tixtieq kontroll assolut fuq liema \n"
-"pakketti jiġu nstallati.\n"
-"\n"
-"Jekk bdejt l-installazzjoni fil-modalità \"Aġġorna\", tista' tneħħi l-"
-"pakketti\n"
-"kollha sabiex ma jiġu installati ebda pakketti fuq li hemm. Dan huwa utli\n"
-"biex issewwi jew taġġorna sistema eżistenti."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finalment, skond jekk għażiltx li tagħżel il-pakketti individwalment, tiġi\n"
-"offruta lista tal-pakketti kollha klassifikati fi gruppi. Waqt li qed "
-"tifli \n"
-"din il-lista, tista' tagħżel gruppi sħaħ jew pakketti individwali.\n"
-"\n"
-"Meta tagħżel pakkett fil-lista, tidher deskrizzjoni maġenbha fuq il-lemin.\n"
-"X'ħin tlesti mill-għażla, klikkja l-buttuna \"Installa\" sabiex tibda' l-\n"
-"proċess ta' installazzjoni. Skond is-saħħa tal-kompjuter u n-numru ta'\n"
-"pakketti li għażilt, jista' jieħu ftit tal-ħin sakemm jiġu installati l-\n"
-"pakketti kollha. Il-ħin totali jiġi stmat u jintwera fuq l-iskrin biex "
-"jgħinek\n"
-"tiddeċiedi għandekx ħin tagħmel kikkra kafè.\n"
-"\n"
-"!! Jekk pakkett ta' server jiġi installat intenzjonalment jew għax jifforma\n"
-"parti minn grupp, int tintalab tikkonferma jekk verament tridx lill dawn\n"
-"is-servizzi jiġu installati. Fil-Mandrake Linux, is-servizzi li tinstalla "
-"jiġu\n"
-"mtella' awtomatikament meta tixgħel. Għalkemm dawn kienu sikuri u ma fihom\n"
-"ebda problemi meta din il-verżjoni ta' Linux inħarġet, jista' jkun li "
-"jinstabu\n"
-"problemi simili wara li ġiet finalizzata din il-verżjoni. Jekk ma tafx \n"
-"x'suppost jagħmel servizz partikulari jew għaliex qed jiġi nstallat, agħżel\n"
-"\"Le\". Jekk tagħfas \"Iva\" dawn is-servizzi jiġu nstallati u jiġu "
-"mtella' \n"
-"awtomatikament fil-bidu.\n"
-"\n"
-"L-għażla \"Dipendenzi awtomatiċi\" sempliċiment titfi l-window li twissik\n"
-"kull meta l-installazzjoni tkun se żżid xi pakketti oħra meħtieġa. Dan "
-"jiġri\n"
-"għax il-programm ikun induna li jinħtieġ pakkett ieħor biex il-programmi li\n"
-"tkun għażilt jaħdmu sew.\n"
-"\n"
-"L-istampa ta' \"floppy disk\" żgħira fil-qiegħ tippermettilek li ttella' l-\n"
-"lista ta' pakketti li ġew magħżula waqt installazzjoni preċedenti. Jekk \n"
-"tikklikkja din l-ikona int tintalab iddaħħal floppy li tkun ħloqt waqt \n"
-"installazzjoni oħra. Ara t-tieni ħjiel fl-aħħar stadju biex tara kif toħloq\n"
-"diska simili."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Issa jmiss li tissettja l-konnessjoni mal-internet/network. Jekk trid "
-"tqabbad\n"
-"il-kompjuter mal-internet jew ma' network lokali, klikkja \"OK\" biex "
-"tħaddem\n"
-"programm li jsib u jikkonfigura l-apparat meħtieġ. Jekk dan il-programm ma \n"
-"jsibx l-apparat meħtieġ, neħħi l-marka minn \"awto-għarfien\" qabel terġa'\n"
-"tipprova. Tista' wkoll tagħżel li ma nikkonfigurax in-network, jew li "
-"tissettjah\n"
-"iżjed tard; f'dan il-każ sempliċiment agħfas il-buttuna \"Ikkanċella\".\n"
-"\n"
-"It-tipi ta' konnessjoni disponibbli huma: modem tradizzjonali, modem ISDN,\n"
-"konnessjoni ADSL, modem cable, kif ukoll konnessjoni sempliċi LAN "
-"(Ethernet).\n"
-"\n"
-"Hawnhekk mhux se nidħlu fid-dettall ta' kull tip ta' konfigurazzjoni. \n"
-"Sempliċiment aċċerta li għandek il-parametri kollha minngħand l-ISP jew\n"
-"amministratur tas-sistema tiegħek.\n"
-"\n"
-"Tista' tikkonsulta l-kapitlu fil-manwal dwar il-konnessjonijiet tal-"
-"internet\n"
-"għal iżjed tagħrif, jew inkella installa l-kumplament tas-sistema imbgħad\n"
-"uża l-programm imsemmi f'dan il-manwal biex tissettja l-konnessjoni.\n"
-"\n"
-"Jekk tixtieq tikkonfigura n-network iżjed tard, jew jekk lest mill-\n"
-"konfigurazzjoni, klikkja \"Ikkanċella\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Hawnhekk tista' tagħżel liema servizzi tixtieq ittella' mal-bidu,\n"
-"\n"
-"Dawn huma s-servizzi kollha disponibbli mal-konfigurazzjoni kurrenti.\n"
-"Iċċekkjahom sew u neħħi dawk li m'għandekx bżonn kull darba li titla'\n"
-"s-sistema.\n"
-"\n"
-"!! F'dan l-istadju, oqgħod attent jekk tixtieq tuża l-kompjuter bħala "
-"server:\n"
-"aktarx ma jkollokx bżonn ittella' servizzi li m'intix se tuża. Ftakar li xi\n"
-"servizzi jistgħu ikunu perikolużi fuq server. Bħala regola ġenerali, ħalli\n"
-"biss dawk is-servizzi li verament għandek bżpnn.\n"
-"!!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux jimmaniġġja l-ħin bħala GMT (Greenwich Mean Time) u jaqiblu "
-"għall-\n"
-"ħin lokali skond iż-żona orarja li tagħżel. Huwa possibbli però li titfi "
-"din\n"
-"il-faċilità billi titfi l-għażla \"Arloġġ tas-sistema huwa GMT\" biex il-"
-"ħin\n"
-"tal-kompjuter jiġi l-istess bħall-ħin tas-sistema. Dan huwa utli jekk il-\n"
-"kompjuter tintuża għal sistemi operattivi bħall-Windows.\n"
-"\n"
-"L-għażla \"Sinkronizzazzjoni tal-ħin awtomatika\" tħallik awtomatikament \n"
-"tirregola l-ħin billi taqbad ma' server speċjali fuq l-internet. Fil-lista\n"
-"li tiġi preżentata, agħżel server viċin tiegħek. Ovvjament irid ikollok\n"
-"konnessjoni mal-internet issettjata biex tuża din il-faċilità. Jekk tuża\n"
-"din l-għażla jiġi nstallat programm apposta fuq il-kompjuter li "
-"jippermettilu\n"
-"li jintuża bħala server tal-ħin għal kompjuters oħra fuq in-network lokali."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (Sistema X Windows) huwa l-qalb tal-interfaċċja grafika GNU/Linux, u fuqu\n"
-"jaħdmu l-ambjenti jew desktops grafiċi kollha (KDE, Gnome, AfterStep,\n"
-"WindowMaker eċċ) li huma nklużi ma' Mandrake Linux. F'dan il-pass, DrakX\n"
-"jipprova jissettja l-X awtomatikament.\n"
-"\n"
-"Huwa rari li dan il-proċess ifalli, sakemm m'għandekx apparat antik ħafna\n"
-"(jew ġdid ħafna). Jekk jirnexxi, huwa awtomatikament jibda' lill X bl-aħjar\n"
-"reżoluzzjoni possibbli skond id-daqs tal-iskrin, u tintwera window biex\n"
-"tikkonferma jekk tistax taraha sew.\n"
-"\n"
-"Jekk qed tuża installazzjoni \"Espert\", int tidħol fis-saħħar ta' \n"
-"konfigurazzjoni X. Ara s-sezzjoni korrispondenti fil-manwal għal iżjed\n"
-"tagħrif.\n"
-"\n"
-"Jekk tista' tara l-messaġġ tajjeb f'dan it-test u tagħżel \"Iva\", DrakX "
-"jimxi\n"
-"għall-pass li jmiss. Jekk ma tarax il-messaġġ, dan sempliċiment ifisser li \n"
-"l-konfigurazzjoni hija ħażina, u t-test joħroġ waħdu wara 10 sekondi u\n"
-"jirrestawra l-iskrin."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"L-ewwel darba li tipprova l-konfigurazzjoni X, tista' ma tkunx sodisfatt\n"
-"bid-dehra (skrin żgħir wisq, mitfugħ wisq lejn ix-xellug/lemin...). "
-"Għalhekk,\n"
-"anke jekk X jaħdem sew, DrakX jistaqsik jekk il-konfigurazzjoni togħġbokx.\n"
-"Huwa jistaqsik jekk tixtieq tibdel xi ħaġa billi jurik lista ta' "
-"modalitajiet\n"
-"differenti li seta' jsib, u jitolbok tagħżel waħda.\n"
-"\n"
-"Bħala possibbiltà ta' aħħar, jekk ma rnexxielekx tħaddem X, agħżel \"Ibdel\n"
-"il-kard grafika\", agħżel \"Kard mhux imniżżla\" u meta tiġi mistoqsi liema\n"
-"server trid, agħżel \"FBDev\". Din hija għażla ġenerika ħafna li għandha \n"
-"taħdem mal-kards grafiċi moderni kollha. Agħżel \"Erġa' pprova\" biex tkun \n"
-"żgur."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finalment, tiġi mistoqsi jekk tridx l-interfaċċja grafika mill-bidu.\n"
-"Innota li din il-mistoqsija tiġi preżentata anke jekk ma ttestjajtx il-\n"
-"konfigurazzjoni. Ovvjament, jaqbillek tagħżel \"Le\" jekk il-kompjuter se\n"
-"jintuża biss bħala server, jew jekk ma rnexxielekx tissettja l-X sew."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Is-CD tal-Mandrake Linux għandu modalità biex tirkupra sistema. Tista' \n"
-"taċċessaha billi tibda' l-kompjuter minn fuq l-ewwel CD, tagħfas \"F1\" "
-"x'ħin\n"
-"titla', u mbgħad tittajpja \"rescue\" fil-prompt. Imma, f'każ li l-"
-"kompjuter\n"
-"ma jistax jitħaddem mis-CDROM, int jista' jkollok bżonn dan il-pass ta' \n"
-"l-inqas f'żewġ sitwazzjonijiet:\n"
-"\n"
-" * Meta tinstalla l-bootloader, DrakX jikteb is-settur \"boot\" (MBR) tad-\n"
-"diska prinċipali (sakemm m'intix qed tuża bootloader ieħor) sabiex tkun "
-"tista'\n"
-"tagħżel lil-Linux jew Windows x'ħin tixgħel (jekk għandek il-Windows \n"
-"installat). Jekk xi darba jkollok terġa' tinstalla l-Windows, dan iħassar "
-"din\n"
-"l-informazzjoni, u ma tkunx tista' ttella' l-GNU/Linux.\n"
-"\n"
-" * Jekk tinħoloq xi problema li ma tħallix lill-GNU/Linux jitla' mid-diska.\n"
-"din il-floppy disk tista' tkun l-uniku mezz biex ittella' l-GNU/Linux. Fid-\n"
-"diska hemm numru raġonevoli ta' programmi biex jgħinuk terġa' tirrestawra\n"
-"sistema li kraxxjat minħabba li jmur id-dawl, żbalji li jsiru, jew "
-"raġunijiet\n"
-"oħra.\n"
-"\n"
-"Meta tikklikkja dan il-pass, int tiġi mitlub iddaħħal diska fid-drive. Il-\n"
-"floppy li ddaħħal trid tkun vojta, jew ikun fiha informazzjoni li tista' \n"
-"tħassar. M'għandekx bżonn tifformattjaha minn qabel għax DrakX se "
-"jħassarha \n"
-"kollha."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"F'dan il-punt int trid tagħżel fejn, fuq il-ħard disk, trid tinstalla s-\n"
-"sistema operattiva Mandrake Linux. Jekk il-ħard disk huwa vojt, jew jekk\n"
-"hemm sistema operattiva qed tokkupaha kollha, l-ewwel trid toħloq \n"
-"partizzjonijiet. Bażikament, il-partizzjonijiet tal-ħard disk jaqsmu d-"
-"diska\n"
-"f'partijiet biex ikun hemm sezzjonijiet fejn tiġi nstallata s-sistema ġdida\n"
-"Mandrake Linux.\n"
-"\n"
-"Peress li l-effett ta' partizzjonament tal-ħard disk m'humiex riversibbli,\n"
-"dan il-proċess jista' jidher intimidanti jekk m'għandekx esperjenza. \n"
-"Fortunatament, hemm \"saħħar\" li jissimplifika l-proċess kollu. Qabel "
-"tibda',\n"
-"ikkonsulta l-manwal u ħu l-ħin tiegħek.\n"
-"\n"
-"Jekk qed tħaddem l-installazzjoni fil-\"Modalità esperta\", int tidħol f'\n"
-"DiskDrake, programm tal-Mandrake għall-partizzjonament tal-ħard disk, li\n"
-"jħallik tirfina l-allokazzjoni tad-diska. Mill-interfaċċja tal-"
-"installazzjoni.,\n"
-"tista' tuża s-saħħar kif deskritt hawn billi tagħfas il-buttuna \"Saħħar\".\n"
-"\n"
-"Jekk diġà huma definiti xi partizzjonijiet, jew minn installazzjoni "
-"preċedenti\n"
-"jew minn xi programm ieħor, tista' tagħżel dawn biex tinstalla fuqhom.\n"
-"\n"
-"Jekk m'hemm ebda partizzjonijiet definiti, trid toħloqhom permezz tas-"
-"saħħar.\n"
-"Skond il-konfigurazzjoni tal-ħard disk, diversi għażliet huma disponibbli:\n"
-"\n"
-" * \"Uża spazju vojt\": Din l-għażla toħloq partizzjonijiet awtomatikament.\n"
-"M'għandek bżonn tagħmel xejn iżjed..\n"
-"\n"
-" * \"Uża partizzjoni eżistenti\": Is-saħħar sab partizzjoni waħda jew iżjed\n"
-"tal-Linux fuq il-ħard disk. Jekk trid tuża lilhom, agħżel din.\n"
-"\n"
-" * \"Uża spazju vojt fuq partizzjoni Windows\": Jekk għandek Microsoft "
-"Windows\n"
-"installat fuq il-ħard disk u qed jokkupa l-ispazju kollu, trid toħloq ftit \n"
-"spasju għal-Linux. Biex tagħmel dan, trid jew tħassar il-partizzjoni "
-"Windows\n"
-"u kull m'hemm fiha (ara \"Ħassar id-diska sħiħa\" jew \"Modalità esperta"
-"\"), \n"
-"jew iċċekken il-partizzjoni Windows. Tista' ċċekken il-partizzjoni Windows \n"
-"mingħajr ma titlef informazzjoni. Din is-soluzzjoni hija rakkomandata biex "
-"tuża \n"
-"l-Windows u l-Linux flimkien fuq l-istess kompjuter.\n"
-"\n"
-"   Qabel tagħżel din l-għażla, kun af li wara din il-proċedura, il-"
-"partizzjoni\n"
-"tal-Windows tkun iżgħar milli hi bħalissa. Ikollok inqas spazju taħt il-\n"
-"Microsoft Windows fejn iżżomm informazzjoni jew tinstalla programmi ġodda.\n"
-"\n"
-" * \"Ħassar id-diska sħiħa\": Jekk tixtieq tħassar l-informazzjoni kollha u\n"
-"l-partizzjonijiet kollha li għandek fuq il-ħard disk u tpoġġi l-Mandrake "
-"Linux\n"
-"minnflokhom, tista' tagħżel din. Oqgħod attent minn din l-għażla għax ma "
-"tkunx\n"
-"tista' tibdel fehemtek wara li tikkonferma.\n"
-"\n"
-"   !! Jekk tagħżel din l-għażla, kull m'hemm fuq id-diska jintilef !!\n"
-"\n"
-" * \"Modalità esperta\": Agħżel dan jekk trid tippartizzjona l-ħard disk \n"
-"manwalment. Oqgħod attent - hija għażla li tagħti kontroll imma hija "
-"perikoluża.\n"
-"Tista' faċilment titlef l-informazzjoni kollha b'dan il-mod. Għalhekk, tużax "
-"din\n"
-"l-għażla jekk ma tafx x'qed tagħmel."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Dak kollox! L-installazzjoni issa hija lesta u s-sistema GNU/Linux issa\n"
-"lesta biex tintuża. Agħfas \"OK\" biex tirristartja l-kompjuter. Tista'\n"
-"tagħżel GNU/Linux jew Windows, skond x'tippreferi (jekk għandek it-tnejn\n"
-"installati) malli jerġa' jixgħel il-kompjuter.\n"
-"\n"
-"Il-buttuna \"Avvanzat\" (f'modalità esperta biss) turik żewġ buttuni oħra:\n"
-"\n"
-" * \"oħloq floppy awto-installa\": toħloqlok floppy li tippermettilek \n"
-"tirrepeti l-istess installazzjoni fuq kompjuter ieħor identiku, mingħajr\n"
-"l-intervent tiegħek.\n"
-"\n"
-"   Innota li meta tagħfas din il-buttuna jintwerew żewġ għażliet oħra:\n"
-"\n"
-"    * \"Replay\". Din hija installazzjoni semi-awtomatika, għax il-pass ta'\n"
-"partizzjonament (u dak biss) jibqa' manwali.\n"
-"\n"
-"    * \"Awtomatiku\". Installazzjoni totalment awtomatika - il-ħard disk\n"
-"titħassar u tinkiteb mill-ġdid, u kull informazzjoni fuqha tintilef.\n"
-"\n"
-"   Din il-faċilità hija utli meta qed tinstalla numru kbir ta' kompjuters\n"
-"identiċi. Ara s-sezzjoni \"Auto install\" fuq il-web site tagħna.\n"
-"\n"
-"  * \"Ikteb l-għażla ta' pakketti\"(*): jikteb l-għażla ta' pekketti li\n"
-"nstallajt. Meta qed tagħmel installazzjoni oħra, daħħal il-floppy fid-drive\n"
-"u meta tibda l-installazzjoni, agħfas [F1] u ħaddem l-installazzjoni "
-"permezz\n"
-"tal-kmand >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Għandek bżonn floppy formattjata FAT (DOS). Biex toħloq waħda mil-"
-"Linux,\n"
-"ittajpja \"mformat a:\"."
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Partizzjonijiet li ġew definiti ġodda jridu jiġu formattjati biex\n"
-"jintużaw (formattjati jfisser li tinħoloq \"filesystem\")\n"
-"\n"
-"F'dan il-punt tista' tagħżel li terġa' tifformattja partizzjonijiet\n"
-"eżistenti biex tħassar li kien hemm fuqhom. Jekk tixtieq tagħmel hekk,\n"
-"agħżel dawk il-partizzjonijiet ukoll.\n"
-"\n"
-"Innota li mhux meħtieġ li terġa' tifformattja l-partizzjonijiet kollha\n"
-"eżistenti. Trid però tifformattja dawk il-partizzjonijiet li jkollhom is-\n"
-"sistema operattiva fuqhom (eż, \"/\", \"/usr\" jew \"/opt\"), imma "
-"m'għandekx\n"
-"bżonn tifformattja dawk li fihom l-informazzjoni tiegħek (tipikament \"/home"
-"\").\n"
-"\n"
-"Oqgħod attent meta tagħżel il-partizzjonijiet. Wara li jiġu formattjati,\n"
-"l-informazzjoni kollha li kien hemm fuqhom tintilef u m'hemmx mod biex "
-"iġġibhom\n"
-"lura.\n"
-"\n"
-"Agħfas \"OK\" meta tkun lest biex tifformattja l-partizzjonijiet.\n"
-"\n"
-"Agħfas \"Ikkanċella\" jekk trid tagħżel partizzjoni oħra għas-sistema ġdida\n"
-"Mandrake Linux.\n"
-"\n"
-"Agħfas \"Avvanzat\" biex tagħżel partizzjonijiet biex jiġu ċċekkjati għal "
-"blokki\n"
-"ħżiena fuq id-diska."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Is-sistema operattiva Mandrake Linux issa qed tiġi installata.\n"
-"Skond in-numru ta' pakketti li għażilt, u s-saħħa tal-kompjuter, dan il-\n"
-"proċess jista' jdum bejn ftit minuti u ħin konsiderevoli.\n"
-"\n"
-"Jekk jogħġbok stenna sakemm ilesti."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Fid-data meta tinstalla l-Mandrake Linux, aktarx ikunu ġew aġġornati xi\n"
-"pakketti minn meta ġiet pubblikata. Xi żbalji jistgħu ikunu ġew irranġati,\n"
-"u problemi ta' sigurtà ġew riżolti. Sabiex tibbenifika minn dawn l-\n"
-"aġġornamenti, jaqbillek tniżżilhom minn fuq l-internet. Agħżel \"Iva\" jekk\n"
-"għandek konnessjoni mal-internet issettjata, jew \"Le\" jekk tippreferi li\n"
-"tinstalla l-aġġornamenti iżjed tard.\n"
-"\n"
-"Jekk tagħżel iva, tintwera lista ta' postijiet minn fejn l-aġġornamenti \n"
-"jistgħu jitniżżlu (\"mirja\"). Agħżel l-iżjed wieħed viċin tiegħek. Imbgħad\n"
-"tintwera lista ta' pakketti. Dur dawn il-pakketti, agħżel liema trid u \n"
-"agħfas \"Installa\" biex tniżżilhom u tinstallahom jew \"Ikkanċella\" biex "
-"twaqqaf."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Qabel tkompli int mitlub taqra sew it-termini ta' din il-liċenzja. Hija\n"
-"kopri d-distribuzzjoni sħiħa ta' Mandrake Linux. Jekk ma taqbilx ma' t-"
-"termini\n"
-"kollha tagħha, klikkja l-buttuna \"Ma naċċettax\", u l-installazzjoni "
-"tieqaf \n"
-"minnufih. Biex tkompli bl-installazzjoni, agħfas il-buttuna \"Naċċetta\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"F'dan il-punt, trid tagħżel livell ta' sigurtà għal dan il-kompjuter.\n"
-"Bħala regola ġenerali, iżjed m'hu espost il-kompjuter, u iżjed m'hi "
-"kruċjali\n"
-"l-informazzjoni ta' fuqu, iżjed irid ikun għoli l-livell ta' sigurtà. Innota "
-"li\n"
-"livell ta' sigurtà iżjed għoli jfisser iżjed diffikultà fl-użu. Irreferi \n"
-"għall-kapitlu MSEC fil-Manwal ta' Referenza għat-tifsira ta' dawn il-"
-"livelli.\n"
-"\n"
-"Jekk ma tafx liema tagħżel, żomm l-għażla impliċita."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"F'dan il-punt trid tagħżel liema partizzjoni/jiet se jintużaw għall-\n"
-"installazzoni tas-sistema Mandrake Linux. Jekk diġà ġew definiti xi\n"
-"partizzjonijiet, minn installazzjoni preċedenti ta' GNU/Linux jew minn\n"
-"għodda ta' partizzjonament oħra, tista' tuża l-partizzjonijiet eżistenti.\n"
-"Altrimenti, l-partizzjonijiet tal-ħard disk iridu jiġu definiti.\n"
-"\n"
-"Biex toħloq il-partizzjonijiet, l-ewwel trid tagħżel ħard disk.\n"
-"Tista' tagħżel diska għall-partizzjonament billi tagħżel \"hda\" għal l-\n"
-"ewwel diska IDE, \"hdb\" għat-tieni, eċċ, jew \"sda\" għal l-ewwel\n"
-"diska SCSI, eċċ.\n"
-"\n"
-"Biex tippartizzjona l-ħard disk magħżula għandek dawn l-għażliet:\n"
-"\n"
-" * \"Ħassar kollox\": din l-għażla tħassar il-partizzjonijiet kollha\n"
-"mill-ħard disk magħżula.\n"
-"\n"
-" * \"Awto allokazzjoni\": din l-għażla awtomatikament toħloqlok "
-"partizzjonijiet\n"
-"Ext2 u swap fl-ispazju vojt tad-diska.\n"
-"\n"
-" * \"Iżjed\" jagħtik aċċess għal iżjed faċilitajiet:\n"
-"\n"
-"    * \"Ikteb tabella tal-partizzjonijiet\": jikteb it-tabella \n"
-"tal-partizzjonijiet fuq floppy. Utli biex tirkupra t-tabella iżjed tard "
-"jekk\n"
-"hemm bżonn. Dan il-pass huwa rakkomandat.\n"
-"\n"
-"    * \"Irrestawra t-tabella tal-partizzjonijet\": tħallik tirrestawra t-\n"
-"tabella tal-partizzjonijiet minn floppy disk fejn ġew miktuba.\n"
-"\n"
-"    * \"Salva tabella tal-partizzjonijiet\": jekk it-tabella tal-"
-"partizzjonijiet\n"
-"ġiet korrotta b'xi mod, din l-għażla tħallik tipprova terġa' tirkupraha. \n"
-"Oqgħod attent b'din l-għażla u ftakar li tista' tfalli.\n"
-"\n"
-"    * \"Erġa' aqra' t-tabella\": jinsa l-bidliet kollha u jerġa' jaqra t-"
-"tabella\n"
-"mill-ħard disk.\n"
-"\n"
-"    * \"awto-muntar ta' media tinħareġ\": jekk tneħħi din l-għażla l-users\n"
-"ikollhom jimmuntaw u jiżmuntaw manwalment diski li jinħarġu bħal floppy u "
-"CDROM.\n"
-"\n"
-" * \"Saħħar\": uża dan il-metodu jekk ma tafx sew kif tagħmel il-\n"
-"partizzjonijiet int.\n"
-"\n"
-" * \"Annulla\": uża din l-għażla biex tikkanċella l-għażliet li għamilt.\n"
-"\n"
-" * \"Aqleb modalità normali/esperta\": jagħtik iżjed azzjonijiet fuq il-\n"
-"partizzjonijiet (tip, għażliet, format) u jagħti iżjed dettalji.\n"
-"\n"
-" * \"Lest\": meta tlesti mill-partizzjonament, dan jikteb il-bidliet li\n"
-"għamilt lid-diska.\n"
-"\n"
-"Nota: tista' tilħaq kull għażla mit-tastiera. Dur il-partizzjonijiet bit-"
-"TAB\n"
-"u l-vleġeġ 'il fuq u 'l isfel.\n"
-"\n"
-"Meta tkun fuq il-partizzjoni li trid, tista tuża:\n"
-"\n"
-" * Ctrl-C biex toħloq partizzjoni (meta l-partizzjoni vojta tkun magħżula)\n"
-"\n"
-" * Ctrl-D biex tħassar partizzjoni\n"
-"\n"
-" * Ctrl-M biex tissettja l-punt ta' mmuntar.\n"
-"\n"
-"Biex tikseb iżjed informazzjoni dwar il-filesystems differenti disponibbli,\n"
-"jekk jogħġbok aqra l-kapitlu ext2fs fil-Manwal ta' Referenza.\n"
-"\n"
-"Jekk qed tinstalla fuq kompjuter PPC, tkun trid toħloq partizzjoni żgħira\n"
-"HFS \"bootstrap\", ta' l-inqas 1MB, li tintuża mill-bootloader yaboot. Jekk\n"
-"tiddeċiedi li tagħmlu ftit ikbar, ngħidu aħna 50MB, tista' ssibu post utli\n"
-"fejn tqiegħed kernel u ramdisk \"spare\" għal emerġenzi."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Instabu iżjed minn partizzjoni waħda tal-Windows fuq il-ħard disk. Jekk \n"
-"jogħġbok agħżel liema minnhom trid iċċekken biex tinstalla s-sistema \n"
-"operattiva Linux.\n"
-"\n"
-"Kull partizzjoni hija mmarkata hekk: \"Isem tal-Linux\", \"Isem fil-Windows"
-"\",\n"
-"\"Daqs\".\n"
-"\n"
-"L-isem tal-Linux huwa mqassam hekk: \"tip ta' diska\", \"numru ta' diska"
-"\", \n"
-"\"numru tal-partizzjoni\", per eżempju, \"hda1\". \n"
-"\n"
-"It-tip ta' diska huwa \"hd\" jekk id-diska hija tip IDE, u \"sd\" jekk "
-"hija \n"
-"tip SCSI.\n"
-"\n"
-"In-numru tad-diska huwa l-ittra ta' wara \"hd\" jew \"sd\". Għal diski IDE:\n"
-"\n"
-" * \"a\" hija d-diska \"master\" fuq il-kontrollatur IDE primarju,\n"
-"\n"
-" * \"b\" hija d-diska skjav fuq il-kontrollatur IDE primarju,\n"
-"\n"
-" * \"c\" hija d-diska \"master\" fuq il-kontrollatur IDE sekondarju,\n"
-"\n"
-" * \"d\" hija d-diska skjav fuq il-kontrollatur IDE sekondarju\n"
-"\n"
-"Fuq diski SCSI, \"a\" hija d-diska bl-iżjed ID baxx, \"b\" hija t-tieni, "
-"eċċ.\n"
-"\n"
-"\"Isem tal-Windows\" huwa l-ittra li jkollha din il-ħard disk taħt il-"
-"Windows\n"
-"(l-ewwel diska jew partizzjoni hija \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Jekk jogħġbok stenna ftit. Dan il-proċess jista' jieħu diversi minuti."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX issa għandu bżonn ikun jaf jekk tridx tagħmel installazzjoni standard "
-"(\"Rakkomandata\") jew waħda li tagħtik iżjed kontroll fuq x'jiġri \n"
-"(\"Espert\"). Għandek ukoll l-għażla jekk tridx installazzjoni ġdida\n"
-"jew aġġornament ta' sistema eżistenti Mandrake Linux:\n"
-"\n"
-" * \"Installa\": Kompletament iħassar is-sistema l-antika. Fil-fatt, skond\n"
-"kif inhi mqassma s-sistema eżistenti, tista' żżomm xi partizzjonijiet\n"
-"mill-antiki kif inhuma.\n"
-"\n"
-" * \"Aġġorna\" Din il-klassi ta' installazzjoni tippermettilek taġġorna\n"
-"l-pakketti li għandek installati fuq il-Mandrake Linux. Hija żżomm il-\n"
-"partizzjonijiet preżenti tal-ħard disk kif ukoll il-konfigurazzjoni tal-\n"
-"users. Il-passi l-oħrajn tal-konfigurazzjoni jibqgħu aċċessibbli bħal \n"
-"installazzjoni normali.\n"
-"\n"
-" * \"Aġġorna pakketti biss\" Din il-klassi ġdida tippermetti li taġġorna\n"
-"l-pakketti ta' sistema eżistenti filwaqt li żżomm il-konfigurazzjoni "
-"eżistenti\n"
-"mhux mimsusa. Tkun tista' wkoll iżżid pakketti ġodda mal-installazzjoni.\n"
-"\n"
-"L-aġġornamenti għandhom jaħdmu fuq sistemi Mandrake Linux minn v8.1 'il\n"
-"quddiem.\n"
-"\n"
-"Skond kemm inti familjari mal-Mandrake Linux, agħżel waħda minn dawn:\n"
-"\n"
-" * Rakkomandat: agħżel din jekk qatt ma nstallajt sistema Mandrake Linux \n"
-"qabel. L-installazzjoni tkun iżjed sempliċi u tiġi mistoqsi biss ftit \n"
-"mistoqsijiet.\n"
-"\n"
-" * Espert: jekk għandek esperjenza sew ta' GNU/Linux tista' tagħżel din\n"
-"il-klassi ta' installazzjoni. L-installazzjoni esperta tħallik tagħmel \n"
-"installazzjoni personalizzata ħafna. Xi wħud mill-mistoqsijiet jistgħu "
-"ikunu\n"
-"diffiċli tirrispondihom jekk ma tafx sew lill-GNU/Linux, għalhekk tagħżilx\n"
-"din il-klassi jekk ma tafx x'qed tagħmel."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalment, DrakX jagħżillek it-tastiera tajba (skond il-lingwa li\n"
-"għażilt) u anqas tara dan il-pass. Però, jista' jkollok tastiera\n"
-"li ma taqbilx eżatt mal-lingwa: per eżempju, jekk int titkellem bil-\n"
-"Malti imma tgħix fi Franza, tista' tkun trid tastiera Franċiża, jew\n"
-"jista' jkollok tastiera Maltija ibbażata fuq tastiera US. F'dawn il-\n"
-"każi, trid tmur lura f'dan il-pass u tagħżel it-tastiera tajba mil-\n"
-"lista.\n"
-"\n"
-"Klikkja fuq il-buttuna \"Oħrajn\" biex tara l-lista kompleta ta' \n"
-"tastiera li hemm fis-sistema."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Jekk jogħġbok agħżel il-lingwa preferuta għall-installazzjoni u l-użu tas-\n"
-"sistema.\n"
-"Agħfas il-buttuna \"Avvanzat\" biex tagħżel lingwi oħra li tixtieq fuq is-\n"
-"sistema. Jekk tagħżel lingwi oħra, il-fajls speċifiċi għal dik il-lingwa "
-"jiġu\n"
-"nstallati fuq is-sistema. Per eżempju, tista' tagħżel il-Malti bħala lingwa\n"
-"ewlenija fil-lista, u fis-sezzjoni avvanzata tagħżel Taljan u Russu billi \n"
-"tikklikkja l-istilla ta' maġenbhom.\n"
-"\n"
-"Innota li tista' tagħżel kemm trid lingwi. Ladarba tkun għażilt il-lingwi\n"
-"li trid agħfas \"OK\" biex tkompli."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Impliċitament, DrakX jassumi li għandek maws b'żewġ buttuni u jissettjah\n"
-"għall-emulazzjoni tat-tielet buttuna. DrakX kapaċi jinduna waħdu jekk il-\n"
-"maws huwiex PS/2, serjali jew USB.\n"
-"\n"
-"Jekk tixtieq tispeċifika tip ta' maws differenti, agħżel it-tip tajjeb mil-\n"
-"lista provduta.\n"
-"\n"
-"Jekk tagħżel tip ta' maws differenti mill-oriġinali, tiġi provduta faċilità\n"
-"biex tittestja s-setings. Uża l-buttuni kollha u r-rota biex tivverifika li "
-"s-\n"
-"setings jaħdmu sew. Jekk il-maws ma jaħdimx sew agħfas \"spazju\" jew\n"
-"[Enter] biex tikkanċella u terġa tagħżel ieħor."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Jekk jogħġbok agħżel il-port it-tajjeb. Per eżempju, il-port \"COM1\" fil-\n"
-"Windows huwa ekwivalenti għal \"ttyS0\" fil-GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Dan huwa punt ta' deċiżjoni kruċjali għas-sigurtà tas-sistema GNU/Linux\n"
-"tiegħek: trid tagħżel password għal \"root\". \"root\" huwa l-user li\n"
-"jintuża bħala amministratur tas-sistema, u huwa l-uniku user awtorizzat\n"
-"li jaġġorna s-sistema, iżid users, jibdel il-konfigurazzjoni. eċċ. Fi kliem\n"
-"ieħor, \"root\" kapaċi jagħmel kollox! Għalhekk huwa importanti li tagħżel\n"
-"password li diffiċli biex taqtagħha -DrakX iwissik jekk tagħżel waħda faċli\n"
-"wisq. Kif tista' tinduna, huwa anke possibbli li ma ddaħħal xejn bħala "
-"password,\n"
-"imma dan huwa perikoluż ĦAFNA u aħna ma nirrakkomandawh qatt. Peress li "
-"\"root\"\n"
-"jista' jegħleb kull limitazzjoni, saħansitra jħassar l-informazzjoni u \n"
-"partizzjonijiet kollha, huwa mportanti li jkun diffiċli kemm jista' jkun li\n"
-"nies oħra jidħlu bħala \"root\".\n"
-"\n"
-"Il-password l-aħjar li jkun taħlita ta' ittri u numri, u ta' l-inqas twil "
-"8 \n"
-"karattri. M'għandek qatt tikteb il-password ta' \"root\" - dan jagħmilha\n"
-"faċli wisq tikkomprometti s-sistema.\n"
-"\n"
-"Fl-istess ħin tagħmilx il-password twil jew komplikat wisq għax int trid\n"
-"tkun kapaċi tiftakarha.\n"
-"\n"
-"Il-password mhux se jintwera fuq l-iskrin waqt li tittajpjah. Għalhekk trid\n"
-"tittajpjah darbtejn biex jonqos iċ-ċans li tagħmel żball waqt li tittajpja.\n"
-"Jekk tagħmel l-istess żball darbtejn, trid tittajpja l-password b'dan il-"
-"mod\n"
-"sakemm tibdlu.\n"
-"\n"
-"Fil-modalità esperta għandek l-għażla li taqbad ma' server ta' "
-"awtentikazzjoni,\n"
-"bħal NIS jew LDAP.\n"
-"\n"
-"Jekk in-network tiegħek juħa protokoll LDAP (jew NIS) għall-"
-"awtentikazzjoni,\n"
-"agħżel \"LDAP\" jew \"NIS\" bħala awtentikazzjoni. Jekk ma tafx, staqsi "
-"lill-\n"
-"amministratur tan-network.\n"
-"\n"
-"Jekk il-kompjuter tiegħek mhux imqabbad ma' network amministrat, agħżel\n"
-"\"Fajls lokali\" għall-awtentikazzjoni."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO u grub huma \"boot loaders\" għall-GNU/Linux. Dan l-istadju normalment\n"
-"huwa totalment awtomatizzat. Fil-fatt, DrakX janalizza s-settur \"boot\" "
-"tad-\n"
-"diska u jaġixxi skond x'isib hemm:\n"
-"\n"
-" * Jekk isib settur boot tal-Windows, dan jiġi mibdul mal-ġdid;\n"
-"\n"
-"F'każ ta' dubju, DrakX jurik window b'diversi għażliet.\n"
-"\n"
-" * \"Boot loader x'tuża\": għandek tliet għażliet:\n"
-"\n"
-"    * \"GRUB\": jekk tippreferi grub (menu testwali).\n"
-"\n"
-"    * \"LILO b'menu grafiku\": jekk tippreferi LILO b'modalità grafika.\n"
-"\n"
-"    * \"LILO b'menu testwali\": jekk tippreferi LILO b'modalità testwali.\n"
-"\n"
-" * \"Apparat boot\": ġeneralment ma tbiddilx il-valur impliċitu (\"/dev/hda"
-"\"),\n"
-"imma jekk tippreferi, il-bootloader jista' jiġi nstallat fuq it-tieni diska\n"
-"(\"/dev/hdb\") jew saħanistra floppy (\"/dev/fd0\").\n"
-"\n"
-" * \"Pawża qabel ittella' impliċitu\": meta tixgħel il-kompjuter, dan "
-"jistenna\n"
-"daqshekk biex il-user ikun jista' jagħmel għażliet oħra.\n"
-"\n"
-"!! Importanti tkun taf li jekk ma tinstallax \"bootloader\" (jekk tagħfas \n"
-"\"Ikkanċella\"), irid ikollok metodu ieħor biex ittella' s-sistema "
-"Mandrake \n"
-"Linux. Kun af sew x'qed tagħmel qabel tibdel waħda minn dawn l-għażliet. !!\n"
-"\n"
-"Jekk tagħfas il-buttuna \"Avvanzat\" f'din il-window tara diversi għażliet\n"
-"avvanzati għal users esperti.\n"
-"\n"
-"Wara li tkun ikkonfigurajt il-parametri ġenerali tal-bootloader, tiġi\n"
-"preżentat b'lista ta' għażliet tal-boot li jkunu disponibbli meta tixgħel.\n"
-"\n"
-"Jekk għandek sistema operattiva oħra installata fuq il-kompjuter, din tkun\n"
-"miżjuda mal-menu tal-boot. Hawn, tista' tirfina l-għażliet eżistenti. "
-"Agħżel\n"
-"wieħed mill-elementi u agħfas \"Biddel\" biex tbiddilhom u \"Neħħi\" biex "
-"tneħħi l-element. \"Żid\" joħloq element ġdid, u \"Lest\" imur fil-pass\n"
-"li jmiss ta' l-installazzjoni."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) u grub huma \"boot loaders\": huma jagħtuk il-faċilità\n"
-"li tħaddem lill-GNU/Linux jew sistema operattiva oħra preżenti fuq il-"
-"kompjuter.\n"
-"Normalment, dawn is-sistemi operattivi oħrajn jiġu magħrufa u konfigurati\n"
-"awtomatikament. Jekk dan m'hux il-każ, tista' żżid għażla mal-menu "
-"manwalment\n"
-"f'dan l-iskrin. Aċċerta li tagħżel il-parametri tajbin.\n"
-"\n"
-"Għandek mnejn ma tkunx trid tagħti aċċess għal dawn is-sistemi operattivi "
-"lill\n"
-"ħadd. F'dak il-każ tista' tħassar dawn l-elementi. Imma mbgħad tkun trid "
-"floppy\n"
-"apposta biex tidħol f'dawn is-sistemi operattivi!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Hawn trid tindika fejn tixtieq tpoġġi l-informazzjoni meħtieġa biex tibda\n"
-"s-sistema.\n"
-"\n"
-"Jekk ma tafx x'inti tagħmel, agħżel \"L-ewwel settur tad-diska (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Hawn tista' tagħżel sistema ta' printjar għall-kompjuter tiegħek. Sistemi\n"
-"operattivi oħra joffrulek waħda, Mandrake Linux jagħtik tlieta.\n"
-"\n"
-" * \"pdq\" - li jfisser \"printja minngħajr kju\", huwa l-aħjar għażla\n"
-"jekk għandek konnessjoni diretta mal-printer, trid il-faċilità li twaqqaf\n"
-"printjar malajr, u m'għandekx printers bin-network. Dan il-metodu jaċċetta\n"
-"biss networking sempliċi, u mhux effiċjenti fuq network. Tista' tagħżel \n"
-"\"pdq\" jekk din hija l-ewwel esperjenza tiegħek fuq Linux. Tista' tibdel\n"
-"din l-għażla wara billi tħaddem PrinterDrake miċ-Ċentru tal-Kontroll \n"
-"Mandrake u tagħfas il-buttuna \"Espert\".\n"
-"\n"
-" * \"CUPS\"\"Sistema ta' Printjar Komuni tal-Linux\" huwa eċċellenti\n"
-"kemm biex tipprintja fuq printer lokali kif ukoll fuq printer in-naħa l-"
-"oħra\n"
-"tad-dinja. Huwa sempliċi u jista' jaħdem kemm bħala server kif ukoll bħala\n"
-"klijent għal sistemi antiki \"lpd\", għalhekk huwa kompatibbli ma' sistemi\n"
-"antiki. Kapaċi jagħmel ħafna affarijiet, imma l-konfigurazzjoni bażika hija\n"
-"sempliċi kważi daqs \"pdq\". Biex jemula server \"lpd\", trid tħaddem is-\n"
-"servizz \"cups-lpd\". CUPS għandu interfaċċji grafiċi biex tipprintja jew\n"
-"tissettja l-għażliet tal-printer.\n"
-"\n"
-" * \"lprNG\" - \"line printer daemon New Generation\". Din is-sistema "
-"tagħmel\n"
-"bejn wieħed u ieħor l-istess affarijiet li jagħmlu l-oħrajn, imma kapaċi "
-"ukoll\n"
-"juża printers fuq network Novell, għax jaċċetta l-protokoll IPX, u kapaċi\n"
-"jipprintja lill kmandijiet tax-shell. Jekk għandek network Novell jew\n"
-"għandek bżonn tipprintja permezz ta' kmand mingħajr ma tuża pajp, uża "
-"lprNG.\n"
-"Altrimenti, CUPS huwa aħjar għax huwa iżjed sempliċi u jaħdem aħjar fuq \n"
-"network."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX issa se jfittex apparat IDE fuq il-kompjuter tiegħek. Huwa wkoll\n"
-"ifittex kard waħda jew iżjed SCSI PCI fuq is-sistema. Jekk tinstab kard\n"
-"SCSI, DrakX awtomatikament jinstalla d-driver għaliha.\n"
-"\n"
-"Press li dan il-proċess mhux dejjem isib ċerti apparat. DrakX jitolbok\n"
-"tikkonferma jekk hemmx kard SCSI PCI fuq il-kompjuter. Agħfas \"Iva\" jekk\n"
-"taf li għandek kard simili fuq il-kompjuter. Int tingħata lista ta' kards \n"
-"SCSI mnejn tagħżel tiegħek. Agħżel \"Le\" jekk m'għandekx kards SCSI. Jekk \n"
-"m'intix ċert tista' tiċċekkja l-lista ta' ħardwer misjub fis-sistema billi\n"
-"tagħfas \"Ara info. ħardwer\" u mbgħad \"OK\". Eżamina l-lista ta' apparat u "
-"mbgħad agħfas \"OK\" biex tiġi lura fil-konfigurazzjoni ta' SCSI.\n"
-"\n"
-"Jekk trid tissettja l-adattur manwalment, DrakX jistaqsik jekk tridx \n"
-"tispeċifika għażliet għalih. Jaqbillek tħalli lill DrakX jeżamina l-ħardwer\n"
-"biex isir jaf liema għażliet għandu bżonn l-apparat biex jaħdem. Dan \n"
-"normalment jaħdem sew.\n"
-"\n"
-"Jekk DrakX mhux kapaċi jagħraf l-għażliet li jridu jiġu mgħoddija, trid\n"
-"tispeċifikahom manwalment lid-driver. Jekk jogħġbok iċċekkja l-\"User Guide"
-"\", (kapitlu 3, \"Collecting Information on Your Hardware\") għal ħjilijiet "
-"dwar\n"
-"kif issir taf il-parametri meħtieġa mid-dokumentazzjoni ta' l-apparat, "
-"mill-\n"
-"website tad-ditta tiegħu, jew minn Microsoft Windows (jekk tuża dan l-"
-"apparat\n"
-"fuq il-Windows ukoll)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Hawn issib diversi parametri li jikkonċernaw il-kompjuter tiegħek. Skond\n"
-"l-apparat li għandek imqabbad tista' tara divers minn dawn:\n"
-"\n"
-" * \"Maws\": iċċekkja l-konfigurazzjoni preżenti tal-maws u klikkja\n"
-"l-buttuna biex tibdlu jekk meħtieġ.\n"
-"\n"
-" * \"Tastiera\": iċċekkja jekk dan jaqbilx mat-tip ta' tastiera tiegħek;\n"
-"agħfas il-buttuna biex tibdlu.\n"
-"\n"
-" * \"Żona tal-ħin\": DrakX, impliċitament, jipprova jaqta' skond il-lingwa\n"
-"li għażilt. Hawnhekk ukoll, bħal fil-każ tat-tastiera, tista' ma tkunx fil-\n"
-"pajjiż ewlieni tal-lingwa, għalhekk tista' tibdel iż-żona billi tagħfas din\n"
-"il-buttuna.\n"
-"\n"
-" * \"Printer\": jekk tagħfas il-buttuna tal-printer tista' tħaddem saħħar\n"
-"biex tissettja l-printer.\n"
-"\n"
-" * \"Kard awdjo\": jekk instabet kard tal-awdjo fuq il-kompjuter tiegħek,\n"
-"tintwera hawn. M'hemm xejn xi tbiddel waqt l-installazzjoni.\n"
-" * \"Kard TV\": jekk instabet kard tat-TV fuq il-kompjuter tiegħek,\n"
-"tintwera hawn. M'hemm xejn xi tbiddel waqt l-installazzjoni.\n"
-"\n"
-" * \"Kard ISDN\": jekk instabet kard ISDN fuq il-kompjuter tiegħek,\n"
-"tintwera hawn. Tista' tagħfas il-buttuna biex tbiddel il-parametri "
-"assoċjati\n"
-"magħha."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Agħżel liema ħard disk trid tħassar biex tinstalla l-partizzjonijiet tal-\n"
-"Mandrake Linux fuqha. Oqgħod attent, l-informazzjoni kollha fuq din id-\n"
-"diska jintilef u ma jkunx jista' jinġab lura!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klikkja fuq \"OK\" jekk trid tħassar l-informazzjoni u partizzjonijiet \n"
-"kollha li hemm fuq dan il-ħard disk. Oqgħod attent, wara li tagħfas \"OK\"\n"
-"ma tkunx tista' terġa' tikseb l-informazzjoni u partizzjonijiet li hemm\n"
-"fuq dan il-ħard disk, inkluż fajls tal-Windows.\n"
-"\n"
-"Klikkja \"Ikkanċella\" biex twaqqaf dan il-proċess minngħajr ma tħassar\n"
-"l-informazzjoni u partizzjonijiet fuq dan il-ħard disk."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Trid ukoll tifformattja %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Int għażilt dan is-server/s: %s\n"
-"\n"
-"\n"
-"Dawn is-servers huma attivati impliċitament. M'għandhom ebda problemi ta'\n"
-"sigurtà magħrufa, imma jistgħu jinstabu ġodda minn żmien għal żmien. "
-"Għalhekk,\n"
-"importanti li żżommhom aġġornati.\n"
-"\n"
-"\n"
-"Żgur li trid tinstalla dawn is-servers?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Ma nsitax nuża \"broadcast\" minngħajr dominju NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Daħħal floppy formattjata FAT fid-drive %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Din il-floppy m'hix formattjata FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Bex tuża din l-għażla ta' pakketti, ħaddem l-installazzjoni b' \"linux "
-"defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Problema fil-qari tal-fajl %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Xi apparat fil-kompjuter tiegħek jeħtieġ drivers speċjali biex jaħdem.\n"
-"Tista' ssib iżjed informazzjoni dwarhom fuq: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Għandek bżonn partizzjoni \"root\".\n"
-"Għal dan l-ewwel oħloq partizzjoni (jew agħżel waħda eżistenti)\n"
-"Imbgħad agħżel \"Punt ta' mmuntar\" u ssettjah għal \"/\""
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Għandek bżonn partizzjoni \"swap\""
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"M'għandekx partizzjoni \"swap\".\n"
-"\n"
-"Trid tkompli xorta?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Għandek bżonn partizzjoni FAT immuntata fuq /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Uża l-ispazju vojt"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "M'hemmx biżżejjed spazju vojt biex jinħolqu l-partizzjonijiet il-ġodda"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Uża partizzjoni eżistenti"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "M'hemmx partizzjonijiet eżistenti x'nuża"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Uża l-partizzjoni tal-Windows għal loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Liema partizzjoni trid tuża għal Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Agħżel id-daqsijiet"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Daqs tal-partizzjoni root f' MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Daqs tal-partizzjoni Swap f' MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Uża l-ispazju vojt fil-partizzjoni tal-Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Liema partizzjoni trid tibdlilha d-daqs?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Qed nikkalkula l-limiti tal-filesystem tal-Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Il-programm biex tibdel id-daqs ta' partizzjoni FAT m'hux\n"
-"kapaċi tbiddel din il-partizzjoni - instabet din il-problema:\n"
-"%s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Il-partizzjoni tal-Windows hija mgerfxa wisq. Jekk jogħġbok ħaddem \"defrag"
-"\"."
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"TWISSIJA!\n"
-"\n"
-"DrakX issa se jbiddel id-daqs tal-partizzjoni Windows. Oqgħod\n"
-"attent: dan il-proċess huwa perikoluż. Jekk għadek m'għamiltx dan,\n"
-"jaqbillek l-ewwel toħroġ mill-proċess tal-installazzjoni, tħaddem\n"
-"\"scandisk\" mill-Windows (u idejalment anke \"defrag\"), u \n"
-"mbgħad terġa' tibda l-installazzjoni. Int rakkomandat ukoll li \n"
-"tieħu \"backup\" tal-informazzjoni importanti.\n"
-"Meta tkun ċert, agħfas Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "X'daqs trid iżżomm għall-windows fuq"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partizzjoni %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Bdil tad-daqs FAT falla: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"M'hemmx partizzjoijiet FAT biex tibdel id-daqs jew biex tużahom bħala\n"
-"\"loopback\" (jew m'hemmx biżżejjed spazju)."
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Ħassar kull m'hemm fid-diska"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Neħħi l-Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Għandek iżjed minn ħard disk waħda. Fuq liema trid tinstalla l-Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Il-partizzjonijiet kollha fuq id-diska %s u l-informazzjoni ta' ġo fihom se "
-"jintilfu"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Partizzjonament personalizzat"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Uża fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Tista' tippartizzjona %s.\n"
-"X'ħin tlesti, tinsiex tikteb il-bidliet billi tittajpja \"w\"."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "M'għandekx biżżejjed spazju fuq il-partizzjoni Windows."
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ma nistax insib spazju fejn ninstalla."
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Is-saħħar ta' partizzjonament DrakX sab dawn is-soluzzjonijiet:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partizzjonament falla: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Qed intella' n-network"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Qed inniżżel in-network"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Inqalgħet problema, imma ma nafx kif nieħu ħsieba sew.\n"
-"Tista' tkompli b'risku tiegħek"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punt ta' mmuntar doppju %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Xi pakketti importanti ma ġewx installati sew.\n"
-"Jew id-drive tas-CDROM, jew is-CD nnifisha huma difettużi.\n"
-"Tista' tiċċekkja s-CD fuq kompjuter diġà nstallat permezz tal-kmand \"rpm -"
-"qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Merħba għal %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "M'hemmx drive floppy"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Dieħel fil-pass \"%s\"\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Is-sistema hija nieqsa mir-riżorsi. Jista' jkollok problema biex tinstalla \n"
-"l-Mandrake Linux. Jekk jiġri dan, ipprova installazzjoni testwali. Għal "
-"dan,\n"
-"agħfas F1 meta titla' s-CD, imbgħad ittajpja \"text\"."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Klassi ta' installazzjoni"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Jekk jogħġbok agħżel waħda minn dawn il-klassijiet ta' installazzjoni:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Id-daqs totali tal-gruppi li għażilt huwa madwar %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Jekk tixtieq tinstalla inqas minn dawn id-daqs, agħżel il-perċentaġġ\n"
-"ta' pakketti li trid tinstalla.\n"
-"\n"
-"Perċentaġġ baxx jinstalla biss l-iżjed programmi importanti;\n"
-"perċentaġġ ta 100%% jinstalla l-pakketti kollha magħżula."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Fuq id-diska għandek spazju għal %d%% biss minn dawn il-pakketti.\n"
-"\n"
-"Jekk tixtieq tinstalla inqas minn hekk, agħżel il-perċentaġġ tal-\n"
-"pakketti li trid tinstalla. Perċentaġġ baxx jinstalla biss l-iżjed \n"
-"programmi importanti; perċentaġġ ta %d%% jinstalla kemm jista' jkun."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Tkun tista' tagħżilhom b'mod iżjed speċifiku fil-pass li jmiss."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Perċentaġġ ta' pakketti x'tinstalla"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Għażla ta' gruppi ta' pakketti"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Agħżel pakketti individwalment"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Daqs totali: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pakkett ħażin"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Isem: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verżjoni: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Daqs: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importanza: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Ma tistax tagħżel dan il-pakkett għax ma fadalx biżżejjed spazju għalih"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Dawn huma l-pakketti li se jiġu nstallati"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Dawn huma l-pakketti li se jiġu mneħħija"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Ma tistax tagħżel dan il-pakkett"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dan il-pakkett huwa kruċjali, ma jistax jitneħħa"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ma tistax tneħħi l-għażla minn dan il-pakkett, diġà nstallat."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Dan il-pakkett għandu bżonn jiġi aġġornat.\n"
-"Żgur li trid tneħħi l-għażla?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ma tistax tneħħi l-għażla minn dan il-pakkett. Irid jiġi aġġornat."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Uri l-pakketti magħżula awtomatikament"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installa"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Aqra/ikteb fuq floppy"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Qed naġġorna l-għażla ta' pakketti"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Installazzjoni minima"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Agħżel il-pakketti li trid tinstalla"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Qed ninstalla"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Qed nistima"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Ħin li fadal "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Stenna ftit, qed nipprepara l-installazzjoni"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakketti"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Qed jinstalla il-pakkett %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Naċċetta"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Ma naċċettax"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Ibdel id-diska CD!\n"
-"\n"
-"Jekk jogħġbok daħħal id-diska mmarkata \"%s\" fid-drive u agħfas Ok meta "
-"tlesti.\n"
-"Jekk m'għandekx din id-diska, agħfas \"Ikkanċella\" biex taqbeż il-pakketti "
-"li qegħdin fuqha."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Trid tkompli xorta?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Kien hemm problema fl-ordni tal-pakketti:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Kien hemm problema fl-installazzjoni tal-pakketti:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Inqalgħet problema"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Żgur trid toħroġ mill-installazzjoni?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Qbil mal-liċenzja"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastiera"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Jekk jogħġbok agħżel tqassim tat-tastiera."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Hawn issib lista sħiħa tat-tastieri disponibbli"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Liema klassi ta' installazzjoni trid?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installa/Aġġorna"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Din hija installazzjoni ġdida jew aġġornament?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Rakkomandat"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Espert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Aġġornament"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Aġġorna l-pakketti biss"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Jekk jogħġbok agħżel it-tip tal-maws."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port tal-maws"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Jekk jogħġbok agħżel il-port serjali li miegħu hemm imqabbad il-maws."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulazzjoni tal-buttuni"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulazzjoni ta' buttuna #2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulazzjoni ta' buttuna #3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Qed nissettja kard PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Qed nikkonfigura IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "m'hemmx partizzjonijiet disponibbli"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Qed niskannja partizzjonijiet biex insib punti ta' mmuntar"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Agħżel punti ta' mmuntar"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ma nistax naqra t-tabella tal-partizzjonijiet, hija korrotta wisq :(\n"
-"Nista nkompli billi nħassar partizzjonijiet ħżiena (L-INFORMAZZJONI \n"
-"KOLLHA tintilef). L-alternattiva hi li ma tħallix lill DrakX ibiddel\n"
-"it-tabella tal-partizzjonijiet (il-problema hi %s)\n"
-"\n"
-"Trid titlef il-partizzjonijiet kollha?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ma rnexxielux jaqra t-tabella tal-partizzjonijiet.\n"
-"Jekk tkompli jkun riskju tiegħel!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"M'hemmx spazju għal bootstrap ta' 1MB. L-installazzjoni se tkompli, imma "
-"biex tħaddem is-sistema trid toħloq partizzjoni bootstrap f' Diskdrake."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Ebda partizzjoni root ma nstabet biex issir aġġornament"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partizzjoni root"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Liem hi l-partizzjoni root tas-sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Trid tirristartja sabiex il-bidliet fit-tabella tal-partizzjonijiet ikollhom "
-"effett."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Agħżel liema partizzjonijiet trid tifformattja"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Trid tiċċekkja għal blokki ħżiena?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Qed nifformattja l-partizzjonijiet"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Qed noħloq u nifformattja fajl %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"M'hemmx biżżejjed swap biex issir l-installazzjoni, jekk jogħġbok żid ftit "
-"swap"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Qed insib pakketti disponibbli"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Qed insib pakketti x'naġġorna"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Is-sistema m'għandiex biżżejjed spazju għall-installazzjoni jew aġġornament "
-"(%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Komplet (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimu (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Rakkomandat (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Jekk jogħġbok agħżel \"ikteb\" jew \"aqra\" l-għażla tal-pakketti fuq\n"
-"floppy. Il-format huwa l-istess bħal floppies ġenerati bl-auto_install."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Aqra' mill-floppy"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Qed tinqara' l-floppy"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Għażla ta' pakketti"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Daħħal floppy li fiha għażla ta' pakketti"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Ikteb fuq floppy"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Id-daqs tal-għażla huwa ikbar mill-ispazju disponibbli"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Tip ta' installazzjoni"
-
-#: ../../install_steps_interactive.pm_.c:672
-#, fuzzy
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Għadek m'għażiltx grupp ta' pakketti\n"
-"Jekk jogħġbok agħżel installazzjoni minima li trid."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Bl-XWindows"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "B' dokumentazzjoni bażika (rakkomandat)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Installazzjoni verament minima (mingħajr urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Jekk għandek is-CDs kollha fil-lista ta' taħt agħfas \"Ok\".\n"
-"Jekk m'għandek ebda waħda agħfas \"Ikkanċella\".\n"
-"Jekk m'għandekx uħud minnhom, neħħi li m'għandekx u agħfas \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM immarkat \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Qed nipprepara l-installazzjoni"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Qed jiġi nstallat il-pakkett %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Konfigurazzjoni ta' wara l-installazzjoni"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Jekk jogħġbok daħħal \"boot floppy\" fid-drive %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Jekk jogħġbok daħħal \"update modules floppy\" fid-drive %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Issa għandek il-possibbiltà li tniżżel softwer immirat għaċ-ċifrazzjoni.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Issa tista' tniżżel pakketti aġġornati li ġew pubblikati wara li\n"
-"din id-distribuzzjoni inħarġet.\n"
-"\n"
-"Tista' tikseb tiswijiet ta' sigurtà jew bugs, imma jrid ikollok\n"
-"konnessjoni mal-internet biex tipproċedi.\n"
-"\n"
-"Trid tinstalla dawn l-aġġornamenti?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Qed nikkuntattja l-website ta' Mandrake Linux biex nikseb lista tal-mirja "
-"disponibbli"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Agħżel mera minn fejn trid iġġib il-pakketti"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Qed nikkuntattja l-mera biex nikseb lista tal-pakketti disponibbli"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Liem hi ż-żona orarja tiegħek?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Arloġġ tal-kompjuter issettjat GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Sinkronizzazzjoni tal-ħin awtomatiku (permezz ta' NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Server NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Server CUPS remot"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Ebda printer"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Għandek iżjed?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sommarju"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Maws"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Żona tal-ħin"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Kard ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Kard awdjo"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Kard TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Fajls lokali"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Issettja l-password ta' \"root\""
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Ebda password"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Dan il-password sempliċi wisq (irid ikun twil tal-inqas %d ittri)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Awtentikazzjoni"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Awtentikazzjoni LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "DN bażi LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Server LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Awtentikazzjoni NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Dominju NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Server NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Bootdisk personalizzata tipprovdi mezz kif ittella' s-sistema Linux\n"
-"minngħajr ma' tinstalla l-bootloader normali. Dan huwa utli jekk ma "
-"tixtieqz\n"
-"tinstalla SILO fuq is-sistema tiegħek, jew jekk xi programm ineħħilek\n"
-"is-SILO, jew jekk SILO ma jaħdimx mal-ħardwer tiegħek. Bootdisk "
-"personalizzata\n"
-"tista' wkoll tintuża mal-\"image\" tat-tiswija (rescue) ta' Mandrake, biex "
-"ikun\n"
-"iżjed faċli tirkupra minn problemi serji.\n"
-"\n"
-"Jekk tixtieq toħloq bootdisk għas-sistema tiegħek, daħħal floppy fl-ewwel \n"
-"drive u agħfas OK."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Floppy drive ewlieni"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "It-tieni floppy drive"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Aqbeż"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, fuzzy, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Bootdisk personalizzata tipprovdi mezz kif ittella' s-sistema Linux\n"
-"minngħajr ma' tinstalla l-bootloader normali. Dan huwa utli jekk ma "
-"tixtieqz\n"
-"tinstalla LILO (jew grub) fuq is-sistema tiegħek, jew jekk xi programm \n"
-"ineħħilek il-LILO, jew jekk LILO ma jaħdimx mal-ħardwer tiegħek. Bootdisk \n"
-"personalizzata tista' wkoll tintuża mal-\"image\" tat-tiswija (rescue) ta' \n"
-"Mandrake, biex ikun iżjed faċli tirkupra minn problemi serji.\n"
-"Tixtieq toħloq bootdisk għas-sistema tiegħek?"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Jiddispjaċini, ebda floppy drive disponibbli"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Agħżel liema floppy drive tixtieq tuża biex toħloq il-bootdisk"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Daħħal floppy ġdida f' %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Qed tinħoloq diska \"boot\""
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Qed nipprepara l-bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Jidher li għandek magna \"OldWorld\" jew mhux \n"
-"magħrufa. Il-bootloader \"yaboot\" m'hux se jaħdem fuqha. \n"
-"L-installazzoni se tkompli, imma trid tuża BootX biex \n"
-"ittella' l-Linux."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Trid tuża \"aboot\"?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Problema fl-installazzjoni ta' aboot.\n"
-"trid tipprova timponi l-installazzoni anke jekk tħassar l-ewwel partizzjoni?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Qed ninstalla l-bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "L-installazzjoni tal-bootloader falla. Dan kien il-messaġġ:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Għandek mnejn trid tbiddel is-setings tal-Open Firmware u tbiddel l-\n"
-"apparat tal-boot biex jiffunzjona l-bootloader.  Jekk ma tixtieqx tara\n"
-"l-prompt tal-bootloader meta tirristartja, żomm Command-Option-O-F \n"
-"waqt ir-reboot u daħħal:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Imbgħad ittajpja: shut-down\n"
-"Meta jerġa' jitla' għandek tara l-prompt tal-bootloader."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Daħħal floppy vojta' fi drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Qed jinħoloq floppy awto-installazzjoni"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Xi passi ma ġewx finalizzati.\n"
-"\n"
-"Trid toħroġ issa?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Prosit! L-installazzjoni issa lesta.\n"
-"Neħħi l-floppy/CD u agħfas Enter biex tirristartja.\n"
-"\n"
-"\n"
-"Għal informazzjoni dwar aġġornamenti li saru għal din il-verżjoni ta' "
-"Mandrake \n"
-"Linux, iċċekkja s-sezzjoni \"Errata\" li hemm fuq:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informazzjoni dwar kif tissettja s-sistema tinstab fil-kapitlu \"Post-install"
-"\" \n"
-"fl-Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Oħloq floppy awto-installa"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"L-awto-installazzjoni tista' tkun totalment awtomatizzata\n"
-"jekk trid. F'dak il-każ tieħu l-ħard disk kollu!!\n"
-"(dan huwa ntenzjonat għal installazzjoni fuq kompjuter ġdid)\n"
-"\n"
-"Forsi tippreferi tuża \"replay\" tal-installazzjoni.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Awtomatizzata"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Replay"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Ikteb l-għażla ta' pakketti"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Installazzjoni Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> bejn l-elementi  | <Space> jimmarka | <F12> skrin li jmiss "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu nieqes"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "consolehelper nieqes"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Agħżel fajl"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avvanzat"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Bażiku"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Stenna ftit"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Espandi friegħi"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Agħlaq friegħi"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Aqleb bejn lista sempliċi jew kategorizzata"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Għażla ħażina, erġa' pprova\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "L-għażla tiegħek? (impliċita: %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Elementi li trid timla':\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "L-għażla tiegħek? (0/1, impliċitu: %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Buttuna \"%s\": %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Trid tikklikkja din il-buttuna?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "L-għażla tiegħek? (impliċita: \"%s\"%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Hemm ħafna affarijiet minn xiex tagħżel (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Nota, l-isem inbidel:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Erġa' sottometti"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Ċekk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Ġermaniż"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spanjol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finlandiż"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Franċiż"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norveġiż"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Pollakk"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russu"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Svediż"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Tastiera UK"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Tastiera US"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albaniż"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armen (antik)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armen (tajprajter)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armen (fonetiku)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Ażeri (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belġjan"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgaru (fonetiku)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaru (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brażiljan (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bjelorussu"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Svizzeru (tqassim Ġermaniż)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Svizzeru (tqassim Franċiż)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Ċekk (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Ġermaniż (bla deadkeys)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Daniż"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norveġiż)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Svediż)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonjan"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Ġorġjan (tqassim \"Russu\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Ġorġjan (tqassim \"Latin\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grieg"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungeriż"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroat"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Iżraeli"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Iżraeli (fonetiku)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranjan"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandiż"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Taljan"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Ġappuniż 106 buttuna"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korean"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latin Amerikan"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litwan AZERTY (antik)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litwan AZERTY (ġdid)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litwan QWERTY \"number row\""
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litwan QWERTY fonetiku"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvjan"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Maċedonjan"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Olandiż"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Pollakk (qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Pollakk (qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugiż"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadiż (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumen (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumen (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russu (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Sloven"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakk (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serb (ċirilliku)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Taġik"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tork (mudell tradizzjonali \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tork (mudell modern \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukranjan"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Tastiera US (internazzjonali)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnamiż qwerty \"numeric row\""
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslav (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Buttuna Alt leminija"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Iż-żewġ buttuni \"shift\" flimkien"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Ctrl u Shift flimkien"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Buttuna CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl u Alt flimkien"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt u Shift flimkien"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Buttuna \"Menu\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Buttuna \"Windows\" tax-xellug"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Buttuna \"Windows\" tal-lemin"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Muntaġġ ċirkolari %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "L-ewwel neħħi l-volumi loġiċi minn ġo fih\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Sapport għal PCMCIA m'għadux jeżisti fil-kernels 2.2. Jekk jogħġbok uża "
-"kernel 2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Maws - Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Maws bir-rota ġeneriku PS2"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "buttuna waħda"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Ġeneriku 2 buttuni"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Ġeneriku"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rota"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serjal"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Ġeneriku 3 buttuni"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Maws Logitech (serjali, tip C7 antik)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 buttoni"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 buttoni"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ebda"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Ebda maws"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Jekk jogħġbok ittestja l-maws"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Biex tħaddem il-maws"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MEXXI R-ROTA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-*-*-bold-r-normal--17-*-100-100-p-*-iso8859-3,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Spiċċa"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Li jmiss ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Ta' qabel"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Dan tajjeb?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Aqbad ma' l-internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"F'Malta, il-metodu li jintuża biex taqbad mal-ADSL huwa\n"
-"pptp, f'pajjiżi oħra l-iżjed metodu komuni huwa pppoe, \n"
-"filwaqt li wħud jużaw dhcp."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "uża dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "uża pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "uża pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Liema klijent dhcp trid tuża?\n"
-"Normali: dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ebda kard tan-network ethernet ma nstabet fuq il-kompjuter.\n"
-"Ma nistax nissettja dan it-tip ta' kollegament minngħajrha."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Agħżel l-interfaċċja tan-network"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Jekk jogħġbok agħżel liema kard tan-network trid tuża biex taqbad ma' l-"
-"internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ebda kard tal-internet ma stabet"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfigurazzjoni tan-network"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Jekk jogħġbok daħħal l-isem tal-kompjuter tiegħek jekk \n"
-"tafu. Xi servers DHCP jeħtieġu l-isem biex jaħdmu. L-isem\n"
-"tal-kompjuter tiegħek irid ikun wieħed sħiħ, bħal\n"
-"\"anna.finanzi.ditta.com\""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Isem tal-kompjuter"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Saħħar tal-Konfigurazzjoni tan-Network"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN estern"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Kard ISDN interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "X'tip ta' konnessjoni ISDN għandek?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"X'tip ta' konfigurazzjoni ISDN trid?\n"
-"\n"
-"* Il-kofigurazzjoni antika tuża isdn4net. Fiha għodda\n"
-"b'saħħithom imma tista' tkun diffiċli biex tissettjam\n"
-"u m'hix standard.\n"
-"\n"
-"* Il-konfigurazzjoni l-ġdida hija iżjed faċli tifimha,\n"
-"iżjed standard, imma fiha inqas għodda.\n"
-"\n"
-"Aħna nirrakkomandaw il-konfigurazzjoni ġdida.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Konfigurazzjoni ġdida (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Konfigurazzjoni antika (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Konfigurazzjoni ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Agħżel provider.\n"
-" Jekk m'hux fil-lista, agħżel \"mhux imniżżel\""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protokoll Ewropew"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protokoll Ewropew (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokoll għall-kumplament tad-dinja"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokoll għall-kumplament tad-dinja\n"
-" ebda kanal D (leased line)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Liema protokoll trid tuża?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "X'tip ta' kard għandek?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ma nafx"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Jekk il-kard hija ISA, il-valuri fuq l-iskrin li jmiss għandhom ikunu "
-"tajbin.\n"
-"\n"
-"Jekk hija kard PCMCIA, trid tkun taf l-IRQ u IO tal-kard.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Waqqaf"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Kompli"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Liema hija l-kard ISDN tiegħek?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Sibt kard ISDN PCI, imma ma nafx x'tip hi. Jekk jogħġbok agħżel kard PCI fuq "
-"l-iskrin li jmiss."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ebda kard ISDN PCI ma stabet. Agħżel waħda fl-iskrin li jmiss."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Jekk jogħġbok agħżel ma' liema port serjali huwa mqabbad il-maws."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Għażliet \"dialup\""
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Isem tal-konnessjoni"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Numru tat-telefon"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Ibbażat fuq scripts"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Ibbażat fuq terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Isem tad-dominju"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "L-ewwel server DNS (opzjonali)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "It-tieni server DNS (opzjonali)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Tista taqta' minn ma' l-internet jew tirrikonfigura l-konnessjoni."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Tista tirrikonfigura l-konnessjoni."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Bħalissa int imqabbad ma' l-internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Tista taqbad mal-internet jew tirrikonfigura l-konnessjoni."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Bħalissa m'intix imqabbad ma' l-internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Aqbad"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Aqta'"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Ikkonfigura l-konnessjoni"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Konfigurazzjoni u konnessjoni tal-internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Issa se nikkonfiguraw il-konnessjoni %s"
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Issa se nissettjaw il-konnessjoni %s.\n"
-"\n"
-"\n"
-"Agħfas OK biex tkompli."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Konfigurazzjoni tan-network"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Peress li qed tagħmel installazzjoni minn fuq in-network, in-\n"
-"network diġà konfigurata.\n"
-"Agħfas Ok biex iżżomm din il-konfigurazzjoni, jew ikkanċella biex\n"
-"tbiddel il-konfigurazzjoni tal-internet u network.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Merħba għas-Saħħar tal-Konfigurazzjoni tan-Network\n"
-"\n"
-"Hawnhekk se nikkonfiguraw il-konnessjoni tal-internet/network.\n"
-"Jekk ma tixtieqx tuża l-għarfien awtomatiku (autodetect), neħħi l-marka.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Agħżel profil li trid tissettja"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Uża għarfien awtomatiku (auto-detect)"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Qed infittex l-apparat..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Konnessjoni b'modem normali"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "misjub fuq port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Konnessjoni ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s misjub"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Konnessjoni ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "misjub fuq interfaċċja %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Konnessjoni Cable"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "konnessjoni cable misjuba"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Konnessjoni LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "kard/s ethernet misjuba"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Agħżel liema konnessjoni trid tissettja"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Int ikkonfigurajet diversi modi biex taqbad ma' l-internet.\n"
-"Liema minnhom trid tuża?\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Konnessjoni ma' l-internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Trid taqbad b'din il-konnessjoni malli tixgħel?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Konfigurazzjoni network"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "In-network irid jiġi ristartjat."
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Kien hemm problema waqt li n-network kien qed jiġi ristartjat: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Prosit! Il-konfigurazzjoni tan-network u l-internet lesti.\n"
-"Din il-konfigurazzjoni issa se tiġi applikata għas-sistema.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Wara li jkun lest, aħna nirrikkmandaw li tirristartja s-sistema X biex "
-"tevita problemi ta' bdil fl-isem tal-kompjuter."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Instabu xi problemi waqt il-konfigurazzjoni.\n"
-"Ittestja l-konnessjoni permezz ta' net_monitor jew mcc. Jekk il-konnessjoni "
-"ma taħdimx, tista' terġa' tħaddem il-konfigurazzjoni."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"TWISSIJA: Dan l-apparat diġà kien konfigurat qabel biex jaqbad ma' l-"
-"internet.\n"
-"Sempliċiment aċċetta li żżomm dan l-apparat konfigurat.\n"
-"Jekk tbiddel il-valuri ta' taħt dawn jieħdu post il-konfigurazzjoni preżenti."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Jekk jogħġbok daħħal il-konfigurazzjoni IP għal dan il-kompjuter.\n"
-"Kull element huwa indirizz IP fil-format deċimali bit-tikek (eż, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Qed nikkonfigura apparat tan-network %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Indirizz IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP Awtomatiku"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L-indirizz IP irid ikun fil-format \"1.2.3.4\""
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Jekk jogħġbok daħħal l-isem tal-kompjuter.\n"
-"Dan irid ikun isem sħiħ, bħal \"joe.linux.org.mt\".\n"
-"Tista' wkoll iddaħħal l-indirizz IP tal-gateway, jekk għandek wieħed."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Server DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (eż. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Apparat gateway"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Konfigurazzjoni tal-proxies"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Żomm kont tal-ID tal-kard tan-network (utli fuq laptops)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy mistenni jibda' http://"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy mistenni jibda' ftp://"
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Konfigurazzjoni ta' l-internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Trid tipprova taqbad ma' l-internet issa?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Qed nittestja l-kollegament..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Is-sistema issa mqabbda ma' l-internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Għal raġunijiet ta' sikurezza, issa se naqta'"
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Is-sistema donnha ma setgħetx taqbad ma' l-internet.\n"
-"Ipprova erġa' kkonfiguraha."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konfigurazzjoni tal-konnessjoni"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Jekk jogħġbok imla' jew iċċekkja l-elementi t'hawn taħt"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ tal-kard"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Mem. tal-kard (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO tal-kard"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 tal-kard"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 tal-kard"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Numru tat-telefon tiegħek"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Isem tal-provider (eż. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefon tal-provider"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 tal-provider (opzjonali)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 tal-provider (opzjonali)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Agħżel il-pajjiż"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Tip ta' daljar"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Veloċità tal-konnessjoni"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Ħin biex tiskadi l-konnessjoni (sek)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Login tal-kont (user name)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Password tal-kont"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "immuntar falla: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Partizzjoni estiża m'hix sapportita fuq din il-pjattaforma"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Għandek toqba fit-tabella tal-partizzjonijiet imma ma nistax nużaha.\n"
-"L-unika soluzzjoni hija li tmexxi l-partizzjoni primarja sabiex din it-toqba "
-"tkun maġenb il-partizzjoni estiża"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restawr minn fajl %s falliet: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Fajl ta' backup ħażin"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Problema waqt kitba fil-fajl %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Qed jiġri xi ħaġa ħażina fuq il-ħard disk.\n"
-"It-test biex niċċekkja l-integrità tal-informazzjoni falla.\n"
-"Dan ifisser li kull ma tikteb fuq id-diska jista' jispiċċa mimli mbarazz."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "neċessarju"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importanti"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "tajjeb ħafna"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "tajjeb"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "forsi"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Sistema ta' Printjar Komuni tal-Unix"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Ġenerazzjoni Ġdida"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Printja minngħajr kju"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Printer lokali"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Printer remot"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Printer fuq server CUPS remot"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Printer fuq server lpd remot"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Printer tan-network (TCP/socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Printer fuq SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Printer fuq server NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Daħħal URI tal-printer"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Għaddi x-xogħol lill kmand"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Mudell mhux magħruf"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Printers lokali"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Printers remoti"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " fuq port parallell \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", printer USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", apparat multi-funzjoni fuq port parallell \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", apparat multi-funzjoni fuq USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", apparat multi-funzjoni fuq HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", apparat multi-funzjoni"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", qed jipprintja fuq %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "fuq server LPD \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", server TCP/IP \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "fuq server Windows \"%s\", share \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "fuq server Novell \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", bil-kmand %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Printer dirett (bla driver)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(fuq %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(fuq dan il-kompjuter)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Fuq server CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Impliċitu)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Agħżel konnessjoni tal-printer"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kif inhu mqabbad il-printer?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Il-printers li hemm fuq servers CUPS m'għandhomx bżonn jiġu ssettjati minn "
-"hawn; dawn il-printers jiġu magħrufa awtomatikament."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Konfigurazzjoni"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Server CUPS remot"
-
-#: ../../printerdrake.pm_.c:71
-#, fuzzy
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Għal servers CUPS remoti, m'għandekx bżonn tagħżel printer minn hawn; is-"
-"servers CUPS jinfurmaw lill-kompjuter tiegħek awtomatikament dwar il-"
-"printers li għandhom. Il-printers kollha li jaf bihom il-kompjuter tiegħek "
-"huma mniżżla taħt \"Printer impliċitu\". Agħżel liema printer minn dawn "
-"tridu jkun dak impliċitu u agħfas il-buttuna \"applika/erġa' aqra printers"
-"\". L-istess buttuna tintuża biex tara printers ġodda li saru disponibbli "
-"(tista' tieħu sa' 30 sekonda biex il-kompjuter jinduna bi printers ġodda "
-"CUPS). Meta s-server CUPS qiegħed fuq network separat, trid tagħti l-"
-"indirizz IP tas-server CUPS, u possibbilment in-numru tal-port sabiex tikseb "
-"l-informazzjoni dwar il-printers minn dan is-server, altrimenti ħalli dawn l-"
-"elementi vojta."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalment, CUPS jiġi konfigurat awtomatikament skond l-ambjent tan-network, "
-"sabiex tkun tista' taċċessa l-printers fuq network lokali. Jekk dan ma "
-"jaħdimx sew, neħħi l-marka minn \"Konfigurazzjoni awtomatika CUPS\" u rranġa "
-"l-fajl /etc/cups/cupsd.conf manwalment. Tinsiex tirristartja 'll-CUPS wara "
-"(kmand: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "L-indirizz IP jidher xi ħaġa hekk: 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "In-numru tal-port irid ikun sħiħ!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "Indirizz IP tas-server CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Konfigurazzjoni CUPS awtomatika"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Qed infittex apparat..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Ittestja ports"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Żid printer ġdid"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Merħba għas-saħħar tal-konfigurazzoni tal-printer\n"
-"\n"
-"Dan is-saħħar iħallik tinstalla printers lokali jew remoti biex jintużaw "
-"minn dan il-kompjuter kif ukoll kompjuters oħra fuq in-network.\n"
-"\n"
-"Huwa jitolbok l-informazzjoni kollha meħtieġa biex tissettja l-printer u "
-"jagħtik aċċess għad-drivers tal-printers kollha disponibbli, l-għażliet tad-"
-"driver, u t-tipi ta' konnessjoni."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Printer lokali"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Merħba għas-Saħħar tal-Printers\n"
-"\n"
-"Dan is-saħħar jgħinek tinstalla l-printer/s imqabbda mal-kompjuter.\n"
-"\n"
-"Jekk jogħġbok ara li l-printer huwa mqabbad mal-kompjuter u huwa mixgħul.\n"
-"Agħfas \"Li jmiss\" meta tkun lest, jew \"Ikkanċella\" jekk ma tridx "
-"tissettja l-printer/s issa.\n"
-"\n"
-"Innota li xi kompjuters jistgħu jikkraxxjaw waqt l-għarfien awtomatiku tal-"
-"printer. Tista' titfi l-għarfien awtomatiku biex tinstalla manwalment. Uża "
-"\"Modalità esperti\" meta trid tissettja printer fuq kompjuter remot, jekk "
-"printerdrake ma jsibux awtomatikament."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Għarfien awtomatiku tal-printers"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Prosit! Il-printer tiegħek issa nstallat u konfigurat!\n"
-"\n"
-"Tista' tipprintja billi tuża l-kmand \"Print\" minn ġo l-programmi li tuża "
-"(ġeneralment taħt il-menu \"Fajl\" jew \"File\").\n"
-"\n"
-"Jekk tixtieq iżżid, tneħħi jew tibdel l-isem ta' printer, jew jekk tixtieq "
-"tbiddel is-setings impliċiti (daqs tal-karta, kwalità eċċ), agħżel \"Printer"
-"\" mis-sezzjoni \"Ħardwer\" taċ-Ċentru tal-Kontroll Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Għarfien awtomatiku tal-printers"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"PrinterDrake huwa kapaċi jagħraf printers imqabbda lokalment mal-port "
-"parallell jew USB, imma nnota li fuq xi sistema l-għarfien awtomatiku KAPAĊI "
-"JWAĦĦAL IS-SISTEMA U JIRRIŻULTA F'FILESYSTEM KORROTT. Għalhekk tagħmel dan "
-"b'riskju tiegħek.\n"
-"\n"
-"Trid li tkompli bl-għarfien awtomatiku tal-printers?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Għarfien awtomatiku"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Issettja printer manwalment"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Instab %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Printer fuq port parallell \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Printer USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Ma nstab ebda printer lokali. Biex tinstalla printer manwalment daħħal l-"
-"isem tal-port jew fajl fl-input. (Portijiet parallelli: /dev/lp0=LPT1, /dev/"
-"lp1=LPT2 eċċ; printers USB: /dev/usb/lp0, /dev/usb/lp1 eċċ)"
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Trid iddaħħal isem ta' port jew fajl!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Ebda printer lokali ma nstab!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Printers tan-network jistgħu jiġu ssettjati biss wara l-installazzjoni. "
-"Agħżel \"Ħardwer\" u mbgħad \"Printer\" miċ-Ċentru tal-Kontroll Mandrake."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Biex tinstalla printer min-network, klikkja \"Ikkanċella\", aqleb għall-"
-"modalità esperti, u erġa' agħżel \"Żid printer ġdid\"."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Dan huwa l-printer li nstab awtomatikament. Jekk dan m'hux il-printer li "
-"ridt tissettja, daħħal isem ta' port/fajl fil-linja tal-input."
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Din hija lista tal-printers kollha li nstabu awtomatikament. Jekk jogħġbok "
-"agħżel il-printer li trid tissettja, jew daħħal isem ta' port/fajl fil-linja "
-"tal-input."
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Dan huwa l-printer li nstab awtomatikament. Il-konfigurazzjoni tal-printer "
-"issir awtomatikament. Jekk il-printer ma ngħarafx sew, jew jekk tippreferi "
-"konfigurazzjoni personalizzata, ixgħel \"Konfigurazzjoni manwali\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Din hija lista tal-printers kollha li nstabu awtomatikament. Jekk jogħġbok "
-"agħżel il-printer li trid tissettja. Il-konfigurazzjoni tal-printer issir "
-"awtomatikament. Jekk il-printer ma ngħarafx sew, jew jekk tippreferi "
-"konfigurazzjoni personalizzata, ixgħel \"Konfigurazzjoni manwali\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Jekk jogħġbok agħżel il-port fejn huwa mqabbad il-printer, jew agħżel isem "
-"ta' port/fajl fil-linja ta' kmand."
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Jekk jogħġbok agħżel il-port ma' fejn hu mqabbad il-printer."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (portijiet parallelli: /dev/lp0, /dev/lp1 huma ekwivalenti għal LPT1, LPT2 "
-"eċċ. L-ewwel printer USB = /dev/usb/lp0, it-tieni printer USB = /dev/usb/lp1 "
-"eċċ )"
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Trid tagħżel/iddaħħal printer/apparat!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Konfigurazzjoni manwali"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Il-printer tiegħek huwa apparat multi-funzjonali tal-HP (OfficeJet, PSC, "
-"PhotoSmart, LaserJet 1100/1200/1220/3200/3300 bi skaner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Qed ninstalla l-pakkett HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Qed niċċekkja u nikkonfigura l-apparat HPOJ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Qed ninstalla pakkett SANE..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skannjar fuq apparat multi-funzjoni HP"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Qed nagħmel il-port tal-printer disponibbli għal CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Qed jinqara d-database ta' printers"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Għażliet għal printer lpd remot"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Biex tipprintja fuq printer remot lpd, trid tagħti l-isem tal-kompjuter kif "
-"ukoll l-isem tal-printer fuq dak is-server."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Isem tal-kompjuter remot"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Isem tal-printer remot"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Isem tal-kompjuter remot nieqes!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Isem tal-printer remot nieqes!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Għażliet għal printer SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Biex tipprintja fuq printer SMB, trid tagħti l-isem SMB tal-kompjuter (li\n"
-"jista' jkun differenti mill-isem TCP/IP), u possibbilment l-indirizz IP "
-"tiegħu, kif ukoll l-isem tal-printer (share name) li trid taqbad miegħu, u "
-"possibbilment l-isem u password tal-user li trid taqbad bih, u informazzjoni "
-"dwar il-workgroup."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Isem tal-kompjuter SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP tas-server SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Isem tal-printer (share)"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Workgroup"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Trid tagħti l-isem jew l-indirizz IP tas-server"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Isem tal-printer (share name) nieqes!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Għażliet tal-printer NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Biex tipprintja fuq printer NetWare, trid tagħti l-isem Netware tal-"
-"kompjuter (li\n"
-"jista' jkun differenti mill-isem TCP/IP), kif ukoll l-isem tal-kju ta' "
-"printjar li tixtieq tuża, u isem u password tal-user jekk hemm bżonn."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Server tal-printer"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Isem tal-Kju tal-Ipprintjar"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Isem tas-server NCP nieqes!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Isem tal-kju NCP nieqes!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Għażliet Printer TCP/Socket"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Biex tipprintja fuq printer TCP jew socket, trid tissupplixxi l-isem tal-"
-"printer u possibbilment in-numru tal-port. Fuq servers HP JetDirect in-numru "
-"tal-port ġeneralment huwa 9100. Fuq printers oħra dan ivarja. Iċċekkja l-"
-"manwal tal-printer."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Isem tal-printer"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "isem tal-printer nieqes"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI tal-printer"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Tista' tispeċifika l-URI tal-printer direttament. Il-URI irid isegwi l-"
-"format tal-CUPS jew tal-Foomatic. Innota li mhux kull tip ta' URI huwa "
-"aċċettat mill-spoolers kollha."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Trid iddaħħal URI validu!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Kull printer jeħtieġ isem, (eż, \"printer\"). Id-deskrizzjoni u post "
-"m'għandhomx bżonn jimtlew. Huma kummenti għall-użu tiegħek."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Isem tal-printer"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Deskrizzjoni"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Post"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Qed nipprepara d-database tal-printers..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Isem tal-printer remot"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Dan tajjeb?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Agħżel user manwalment"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Għażla tal-mudell tal-printer"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Liema mudell ta' printer għandek?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Jekk jogħġbok iċċekkja li PrinterDrake sab il-mudell tal-printer tiegħek "
-"sew. Jekk il-mudell immarkat m'huwiex tajjeb jew qiegħed fuq \"printer dirett"
-"\" ara jekk issibx il-mudell int fil-lista."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Konfigurazzjoni OKI WinPrinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Konfigurazzjoni inkjet Lexmark"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Setings impliċiti tal-printer\n"
-"\n"
-"Aċċerta li d-daqs tal-paġna u t-tip ta' inka/printing (jekk hemm) kif ukoll "
-"il-konfigurazzjoni tal-ħardwer tal-printer (memorja, unità dupleks, kxaxen "
-"extra) huma settjati sew. Innota li jekk tagħżel kwalità/reżoluzzjoni għolja "
-"ħafna il-printing jista' jdum ħafna iżjed u/jew juża iżjed inka."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Għażla %s trid tkun numru sħiħ!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Għażla %s trid tkun numru!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Għażla %s barra mil-limiti!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Tixtieq tissettja dan il-printer (\"%s\")\n"
-"bħala l-printer impliċitu?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Paġni biex tittestja"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Jekk jogħġbok agħżel il-paġni li trid tipprintja biex tittestja.\n"
-"Nota: Il-paġna fotografika tista' tieħu ħafna ħin biex tlesti, u fuq laser "
-"printers bi ftit memorja tista' anqas tipprintja. F'ħafna każi huwa "
-"biżżejjed li tipprintja l-paġna standard."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Ebda paġni ta' testjar"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Printja"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Paġna standard"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Paġna alternattiva (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Paġna alternattiva (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Paġna fotografika"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Tipprintjax paġna għal test"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Qed nipprintja paġna/i ta' test..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Il-paġna/i intbagħatu fuq il-printer.\n"
-"Jista jgħaddi xi ftit ħin qabel jibda' l-printjar.\n"
-"Status tal-printjar:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Il-paġna/i intbagħatu fuq il-printer.\n"
-"Jista jgħaddi xi ftit ħin qabel jibda' l-printjar.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Ħadem sewwa?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Printer dirett"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Biex tipprintja fajl mil-linja ta' kmand (terminal), tista' tuża l-kmand \"%"
-"s <fajl>\" jew programm grafiku: \"xpp <fajl>\" jew \"kprinter <fajl>\". Il-"
-"programmi grafiċi jħalluk tagħżel il-printer jew tbiddel is-setings "
-"faċilment.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Dan il-kmand jista' wkoll jintuża fl-element \"Printing command\" tal-window "
-"tal-ipprintjar ta' ħafna programmi, imma iddaħħalx l-isem tal-fajl hemm għax "
-"dak jissupplixxih il-programm.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Il-kmand \"%s\" iħallik ukoll tbiddel is-setings għal xogħol ta' printjar "
-"partikulari. Sempliċiment żid is-setings li trid fuq il-linja ta' kmand, eż "
-"\"%s <file>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Biex tikseb lista ta' għażliet disponibbli għal dan il-printer, aqra l-lista "
-"li tidher taħt, jew agħfas il-buttuna \"Lista ta' għażliet tal-printer\". %"
-"s.\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Dawn huma l-għażliet disponibbli għal dan il-printer:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Biex tipprintja fajl mil-linja ta' kmand (terminal) uża l-kmand \"%s <fajl>"
-"\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Dan il-kmand jista' wkoll jintuża fl-element \"Printing command\" tal-window "
-"tal-ipprintjar ta' ħafna programmi, imma iddaħħalx l-isem tal-fajl hemm għax "
-"dak jissupplixxih il-programm.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Biex tikseb lista ta' għażliet disponibbli għal dan il-printer agħfas il-"
-"buttuna \"Lista ta' għażliet tal-printer\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Biex tipprintja fajl mil-linja ta' kmand (terminal) uża l-kmand \"%s <fajl>"
-"\" jew \"%s <fajl>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Tista' wkull tuża l-interfaċċja grafika \"xpdq\" biex tissettja l-għażliet u "
-"biex tieħu ħsieb xogħlijiet ta' printjar.\n"
-"Jekk qed tuża l-KDE bħala ambjent tad-desktop, għandek issib ikona fuq id-"
-"desktop li tħallik twaqqaf il-printjar kollu, per eżempju jekk jeħlulek il-"
-"karti.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Il-kmandijiet \"%s\" u \"%s\" iħalluk ukoll tbiddel is-setings għal xogħol "
-"ta' printjar partikulari. Sempliċiment żid is-setings li trid fuq il-linja "
-"ta' kmand, eż \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Agħlaq"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Printjar/skannjar fuq \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Printjar fuq printer \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Lista ta' għażliet tal-printer"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Qed jinqara informazzjoni dwar printer..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Trasferixxi konfigurazzjoni tal-printer"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Tista' tikkopja l-konfigurazzjoni tal-printer minn spooler %s għal %s, l-"
-"ispooler attwali. L-informazzjoni kollha tal-konfigurazzjoni (isem tal-"
-"printer, deskrizzjoni, post, tip ta' konnessjoni u setings impliċiti) jiġu "
-"trasferiti, imma xogħlijiet eżistenti ta' printjar ma jiġux trasferiti.\n"
-"Mhux il-kjus kollha jistgħu jiġu trasferiti minħabba dawn ir-raġunijiet:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ma jaċċettax printers fuq servers Novell jew servers li jibgħatu d-data "
-"lill kmand \"free format\".\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ jaċċetta biss printers lokali, printers remoti LPD, u printers Socket/"
-"TCP.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD u LPRng ma jaċċettawx printers IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Apparti minn dan, kjus li ma nħalqux b'dan il-programm jew \"foomatic-"
-"configure\" ma jistgħux jiġu trasferiti."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Ukoll, printer ikkonfigurati bil-fajls PPD provduti mill-manufatturi jew bi "
-"drivers CUPS nativi ma jistgħux jiġu trasferiti."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Immarka l-printers li trid tittrasferixxi u klikkja \"Trasferixxi\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Tittrasferixxix printers"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Trasferixxi"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Printer jismu \"%s\" diġà jeżisti taħt %s.\n"
-"Klikkja \"trasferixxi\" biex tħassar li hemm.\n"
-"Tista' wkoll tagħtih isem ġdid jew taqbżu."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "L-isem tal-printer jista' jkun fih biss ittri, numri, u underscore"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"il-printer \"%s\" diġà jeżisti. \n"
-"Trid tħassar il-konfigurazzjoni tiegħu?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Isem tal-printer ġdid"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Qed nittrasferixxi %s..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Int ittrasferixxejt il-printer li kien impliċitu qabel (\"%s\"). Trid li "
-"jerġa' jkun il-printer impliċitu taħt is-sistema l-ġdida %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Qed nerġa' naqra' l-printers..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Konfigurazzjoni ta' printer remot"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Qed nibda' n-network..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Ikkonfigura n-network issa"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Funzjonalità tan-network m'hix konfigurata"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Qed tipprova tissettja printer remot. Dan għandu bżonn aċċess għan-network, "
-"imma s'issa ma ġietx issettjata n-network. Jekk tkompli minngħajr network, "
-"għandu mnejn ma tkunx tuża l-printer li qed tissettja issa. Kif trid "
-"tipproċedi?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Kompli kkonfigura mingħajr network"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Il-konfigurazzjoni tan-network li saret waqt l-installazzjoni ma tistax "
-"tittella' issa. Jekk jogħġbok iċċekkja jekk in-network isirx aċċessibbli "
-"wara li tirristartja s-sistema, imbgħad ikkoreġi l-konfigurazzjoni miċ-"
-"Ċentru tal-Kontroll Mandrake, taħt is-sezzjoni \"Network u Internet\"/"
-"\"Konnessjoni\", u wara ssettja l-printer, mill-istess Ċentru tal-Kontroll, "
-"sezzjoni \"Ħardwer\"/\"Printer\"."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"L-aċċess għan-network ma kienx qed jaħdem u ma setax jittella'. Jekk "
-"jogħġbok iċċekkja l-konfigurazzjoni tal-ħardwer, imbgħad erġa' pprova "
-"kkonfigura l-printer remot."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Qed nirristartja s-sistema ta' printjar..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "għoli"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranojd"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Qed ninstalla sistema ta' printjar taħt livell ta' sigurtà %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Se tinstalla s-sistema ta' printjar %s fuq sistema li għandha l-livell ta' "
-"sigurtà %s.\n"
-"\n"
-"Din is-sistema ta' printjar tħaddem daemon (proċess fl-isfond) li jistenna' "
-"xogħlijiet ta' printjar u jieħu ħsiebhom. Dan id-daemon huwa wkoll "
-"aċċessibbli minn kompjuters oħra fuq in-network għalhekk huwa possibbli għal "
-"attikki fuqu. Għalhekk, id-daemons li jittellgħu f'dan il-livell huma ftit u "
-"magħżula sew.\n"
-"\n"
-"Żgur li trid tikkonfigura l-ipprintjar fuq dan il-kompjuter?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Qed nistartja s-sistema ta' printjar waqt ix-xegħil"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Is-sistema ta' printjar (%s) mhux se jittella' awtomatikament meta tixgħel "
-"il-kompjuter.\n"
-"\n"
-"Huwa possibbli t-tlugħ awtomatiku ġie mitfi meta bdilt il-livell ta' sigurtà "
-"ogħla, peress li s-sistema ta' printjar huwa punt fejn possibbilment isiru "
-"attakki.\n"
-"\n"
-"Trid li terġa' tixgħel it-tlugħ awtomatiku tas-sistema ta' printjar?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Qed niċċekkja s-softwer li hemm installat..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Qed inneħħi LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Qed inneħħi LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Agħżel \"spooler\" tal-printer"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Liema sistema ta' printjar (spooler) tixtieq tuża?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Qed nikkonfigura l-printer \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Qed ninstalla Foomatic..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Għażliet tal-printer"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Qed jiġi preparat PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Qed nikkonfigura l-printer \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Tixtieq tissettja l-printing?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Sistema ta' pprintjar: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Dawn huma l-printers ikkonfigurati. Klikkja-djoppju fuq printer biex "
-"tbiddillu l-konfigurazzjoni, biex tissettjah bħala printer impliċitu, jew "
-"tara informazzjoni dwaru."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Dawn huma l-printers ikkonfigurati. Klikkja-djoppju fuq printer biex "
-"tbiddillu l-konfigurazzjoni, biex tissettjah bħala printer impliċitu, jew "
-"tara informazzjoni dwaru."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Erġa' aqra l-lista ta' printers (biex issib printers remoti CUPS)"
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Ikkonfigura sistema tal-ipprintjar"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modalità normali"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Trid tikkonfigura dan il-printer?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Biddel il-konfigurazzjoni tal-printer"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Printer %s\n"
-"Xi trid tagħmel b'dan il-printer?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Agħmel dan!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tip ta' konnessjoni tal-printer"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Isem, deskrizzjoni u fejn qiegħed il-printer"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Ditta, mudell u driver tal-printer"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Ditta u mudell tal-printer"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Nissettja dan bħala l-printer impliċitu"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Nipprintja paġni biex nittestja"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Inkun naf kif nuża dan il-printer"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Neħħi printer"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Qed inneħħi l-printer antik \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Printer impliċitu"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Il-printer \"%s\" issa ssettjat bħala printer impliċitu"
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Żgur li trid tneħħi l-printer \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Qed jitneħħa printer \"%s\"..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Konfigurazzjoni tal-proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Merħba għall-għodda tal-konfigurazzjoni tal-proxy.\n"
-"\n"
-"Hawn, tista' tissettja l-proxies ftp u http, bil-\n"
-"login u password jew minngħajrhom.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Jekk jogħġbok imla' l-informazzjoni dwar il-proxy http.\n"
-"Ħallihom vojta jekk ma tridx proxy http."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url irid jibda' b' \"http:\""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Il-parti tal-port trid tkun numerika"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Jekk jogħġbok imla' l-informazzjoni dwar il-proxy ftp.\n"
-"Ħallihom vojta jekk ma tridx proxy ftp."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url irid jibda' b' \"ftp:\""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Jekk jogħġbok daħħal il-login u password tal-proxy, jekk hemm.\n"
-"Ħallihom vojta jekk ma tridx login/passwd"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "password"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "erġa ttajpja password"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Il-passwords ma jaqblux. Erġa' pprova!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ma nistax inżid partizzjoni fuq RAID _formattjat_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ma nistax nikteb fajl %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid falla"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid falla (forsi raidtools m'hux installat?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "M'hemmx biżżejjed partizzjonijiet għal RAID livell %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Ħaddem is-sistema tal-awdjo ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron iħaddem kmandijiet perjodikament."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd jintuża biex tiċċekkja l-istatus tal-batterija ta' laptop u żżomm\n"
-"rikordju fis-syslog. Jista jintuża wkoll biex jintefa' awtomatikament\n"
-"beta l-batterija titbaxxa wisq."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Iħaddem kmandijiet li jiġu appuntati mill-kmand \"at\" fil-ħin speċifikat\n"
-"meta tħaddem \"at\", u jħaddem programmi meta t-tagħbija tas-sistema tkun\n"
-"baxxa biżżejjed."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron huwa programm standard tal-UNIX li jħaddem programmi speċifikati \n"
-"mill-user f'ħinijiet speċifiċi. Vixie cron iżid numru ta' fattizzi lill-\n"
-"cron bażiku tal-UNIX, inkluż sigurtà aħjar u konfigurazzjoni iżjed "
-"b'saħħitha."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM jippermetti l-użu tal-maws fi programmi non-grafiċi bħall-Midnight\n"
-"Commander. Jippermetti wkoll ikkopjar ta' test u menus popup fil-konsol."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake iħaddem inkjesta tal-ħardwer, u jista' jsib u \n"
-"jikkonfigura apparat ġdid li twaħħal."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache huwa server tal-web. Huwa jista' joffri fajls HTML u CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Id-daemon tal-internet \"superserver\" (magħruf bħala inetd) itella'\n"
-"varjetà ta' servizzi oħra tal-internet skond il-ħtieġa. Huwa responsabbli\n"
-"li jtella' diversi servizzi, inkluż telnet, ftp, rsh u rlogin. Jekk tneħħi\n"
-"lill-inetd tkun neħħejt is-servizzi kollha tiegħu."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Ħaddem filtering ta' pakketti għall-kernel verżjoni 2.2 tal-Linux,\n"
-"biex tissettja firewall biex tipproteġi l-kompjuter minn attakki \n"
-"min-network"
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Dan il-pakkett itella' t-tqassim tat-tastiera kif konfigurat f'\n"
-"/etc/sysconfig/keyboard.  Dan jista' jiġi ssettjat bil-programm kbdconfig.\n"
-"Dan għandu jibqa' ssettjat għal ħafna magni."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Riġenerazzjoni awtomatika tal-headers tal-kernel ġewwa\n"
-"/boot għal /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Għarfien u konfigurazzjoni ta' apparat ġdid meta tixgħel."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Il-programm Linuxconf ġieli jagħmel diversi xogħlijiet waqt li qed\n"
-"jitla' l-kompjuter biex imantni l-konfigurazzjoni."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd huwa daemon tal-ipprintjar li huwa meħtieġ biex jaħdem sew l-lpr.\n"
-"Huwa bażikament server li jqassam xogħol ta' pprintjar lill-printer/s."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, li jintuża biex tibni servers kbar u \n"
-"effiċjenti ħafna."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) huwa \"Domain Name Server\" (DNS) li jirrisolvi l-indirizz IP "
-"minn isem ta' kompjuter."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Jimmonta u jiżmonta l-filesystems kollha NFS (Unix/Linux), \n"
-"SMB (LANmanager/Windows) jew NCP (Netware)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Itella' jew iwaqqaf l-interfaċċji kollha tan-network li qegħdin \n"
-"konfigurati biex jitilgħu meta tixgħel."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS huwa protokoll popolari għal qsim ta' fajls fuq networks TCP/IP. \n"
-"Dan is-servizz jipprovdi funzjonalità ta' server NFS, li jiġi konfigurat \n"
-"mill-fajl /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS huwa protokoll popolari għal qsim ta' fajls fuq networks \n"
-"TCP/IP. Dan il-modulu jipprovdi faċilità li ssakkar fajls bl-NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Awtomatikament ixgħel in-\"numlock\" taħt il-konsol u XFree \n"
-"meta tixgħel"
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Jippermetti l-użu tal-Oki4w \"win-printer\" jew kompatibbli"
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Il-PCMCIA normalment jintuża għal kards tan-network jew modems fuq \n"
-"kompjuters laptop. Dan ma jittellax jekk ma jkunx konfigurat għalhekk \n"
-"m'hux problema jekk tħallih fuq kompjuters li m'għandhomx bżonnu."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Il-portmapper jimmaniġġja konnessjonijiet RPC, li jintużaw minn \n"
-"protokolli bħal NFS u NIS. Is-server portmap irid ikun qed jaħdem fuq\n"
-"kompjuters li jaġixxu bħala servers għal protokolli li jużaw il-\n"
-"mekkaniżmu RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix huwa aġent tat-trasport tal-imejl, ċioè programm li jgħaddi imejls "
-"minn kompjuter għall-ieħor."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Jikteb u jirrestawra blokka ta' entropija għall-ġenerazzjoni ta' \n"
-"numri bil-polza iżjed randomi."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Jassenja apparat \"raw\" lill apparat \"block\" (bħal partizzjoni tal-ħard "
-"disk), għal programmi bħall-Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Id-daemon routed jippermetti lit-tabella tar-\"routing\" li tiġi\n"
-"aġġornata awtomatikament bil-protokoll RIP. Filwaqt li l-protokoll RIP\n"
-"huwa komuni fuq networks żgħar, huma meħtieġa protokolli ta' routing\n"
-"iżjed sofistikati fuq networks kumplikati."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Il-protokoll rstat jippermetti users fuq network li jiksbu\n"
-"informazzjoni dwar l-effiċjenza ta' kull magna fuq dan in-network."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Il-protokoll rusers jippermetti lill users fuq network li jidentifikaw\n"
-"min qiegħed illoggjat fuq magni oħra."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Il-protokoll rwho jippermetti lill user remot li jikseb lista \n"
-"tal-users kollha li qegħdin konnessi mal-kompjuter (simili għal finger)"
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Ħaddem is-sistema awdjo fuq il-kompjuter"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog huwa faċilità li permezz tagħha d-daemons jistgħu iżommu\n"
-"log ta' messaġġi. Dejjem huwa rakkomandat li tħaddem 'is-syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Tella' d-drivers għall-apparat usb"
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Itella' l-\"X Font Server\" (dan huwa meħtieġ biex jaħdem l-XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Agħżel liema servizzi għandhom jittellgħu awtomatikament meta tixgħel"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Printjar"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Qsim ta' fajls"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistema"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Amministrazzjoni remota"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Server Database"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servizzi: %d imtella' għal %d reġistrati"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servizzi"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "imtella'"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "imwaqqaf"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servizzi u daemons"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"M'hemmx iżjed informazzjoni\n"
-"dwar dan l-apparat, jiddispjaċini."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Malli tixgħel"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Ibda"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Ieqaf"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Grazzi talli għażilt Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Merħba għad-dinja Sors Miftuħ"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Is-suċċess ta' MandrakeSoft huwa bbażat fuq il-prinċipju ta' Softwer Ħieles. "
-"Is-sistema operattiva ġdida tiegħek hija frott il-ħidma u koperazzjoni min-"
-"naħa tal-kommunità dinjija tal-Linux."
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Ingħaqad mad-dinja ta' Softwer Ħieles"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Sir af lill-kommunità Sors Miftuħ u sir membru. Tgħallem, għallem u għin "
-"lill-oħrajn billi tingħaqad fid-diversi fora li ssib fuq il-paġni tal-web "
-"għall-kommunità tagħna."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet u Messaġġi"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 jipprovdi l-aqwa softwer biex taċċessa kollux li "
-"joffrilek l-internet. Brawżja l-web u ara animazzjonijiet bil-Mozilla u "
-"Konqueror, ibgħat imejl u organizza l-informazzjoni personali tiegħek bl-"
-"Evolution u KMail, u ħafna iżjed!"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia u Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 iħallik tħaddem il-kompjuter multimedia tiegħek sal-"
-"limiti! Uża l-aħħar programmi biex tisma' mużika u awdjo, editja u organizza "
-"ritratti u stampi, ara TV u videos, u ħafna iżjed"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Żviluppar"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 huwa l-aqwa pjattaforma għall-iżviluppar. Skopri l-qawwa "
-"tal-kompilatur GNU gcc kif ukoll l-aqwa ambjenti ta' żviluppar Sors Miftuħ."
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Ċentru tal-Kontroll Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Iċ-Ċentru tal-Kontroll Mandrake Linux huwa post wieħed minn fejn tista' "
-"tippersonalizza u tikkonfigura s-sistema Mandrake tiegħek"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "User interfaces"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 jipprovdilek 11-il ambjent tad-destkop grafiku mnejn "
-"tagħżel, inkluż GNOME 1.4, KDE 2.2.2, WindowMaker 0.8 u oħrajn"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Programmi għal Server"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Ibdel il-kompjuter tiegħel f'server b'saħħtu bi ftit azzjonijiet tal-maws: "
-"Servers tal-web, imejl, firewall, router, fajls u printjar, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Logħob"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 joffri l-aħjar logħbiet b'sors miftuħ - arcade, azzjoni, "
-"karti, sports, strateġija..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Tixtieq titgħallem il-Linux b'mod sempliċi, malajr u b'xejn? MandrakeSoft "
-"jipprovdu stħarriġ fuq il-Linux, kif ukoll mezz biex tittestja l-progress "
-"tiegħek fuq MandrakeCampus - iċ-ċentru ta' taħriġ elettroniku tagħna"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Għajnuna ta' kwalità mill-Komunità Linux, u minngħand MandrakeSoft, huwa "
-"pass 'il bogħod. U jekk int diġà veteran tal-Linux, tista' ssir \"Espert\" u "
-"taqsam it-tagħlim tiegħek fil-website ta' sapport tagħna."
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Għall-proġetti kollha tal-IT tiegħek, il-konsulenti tagħna lesti janalizzaw "
-"il-ħtiġijiet tiegħek u joffrulek soluzzjoni personalizzata. Ibbenefika mill-"
-"esperjenza vasta ta' MandrakeSoft bħala produttur tal-Linux biex tipprovdi "
-"soluzzjoni sħiħa alternattiva għad-ditta tiegħek"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Varjetà sħiħa ta' soluzzjonijiet bil-Linux, kif ukoll offerti speċjali fuq "
-"il-prodotti huma disponibbli online fuq il-ħanut elettroniku tagħna."
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-#, fuzzy
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Għal iżjed tagħrif dwar is-servizzi professjonali ta' MandrakeSoft kif ukoll "
-"offerti kummerċjali, jekk jogħġbok ċemplilna fuq in-numru \"toll-free\" li "
-"tara hawn:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Qed ninstalla pakketti..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ma nistax naqra t-tabella tal-partizzjoni - hija mħarbta wisq :(\n"
-"Ħa nipprova nkompli nneħħi partizzjonijet ħżiena"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Problema!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ma nistax insib il-fajl \"image\" meħtieġ \"%s\""
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Konfiguratur Awto-Installazzjoni"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Int issa se tikkonfigura floppy Awto-installazzjoni. Din il-faċilità tista' "
-"tkun perikoluża u trid tintuża bil-galbu.\n"
-"\n"
-"B'din il-faċilità tista' tirrepeti l-installazzjoni li għamilt fuq dan il-"
-"kompjuter, filwaqt li tiġi mistoqsi dwar ċerti passi biex tbiddillhom il-"
-"valur.\n"
-"\n"
-"Għal sigurtà massima, il-partizzjoni u formattjar tal-ħard disk qatt ma "
-"jsiru awtomatikament, tagħżel x'tagħżel waqt l-installazzjoni tal-"
-"kompjuter.\n"
-"\n"
-"Trid tkompli?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Passi tal-Konfigurazzjoni Awtomatika"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Jekk jogħġbok agħżel għal kull pass, jekk tridhiex tkun bħal din l-"
-"installazzjoni, jew tkunx manwali"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Merħba.\n"
-"\n"
-"Il-parametri għall-awto-installazzjoni jinstabu fil-parti tax-xellug."
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Prosit!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Il-floppy ġie ġenerat kif mitlub.\n"
-"Issa tista' tirrepeti l-installazzjoni."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Awto-installazzjoni"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Żid element"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Neħħi l-aħħar element"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                     Rapport DrakBackup\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    Rapport tad-daemon DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                 Dettalji tar-Rapport DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "progress totali"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Ħu backup ta' fajls tas-sistema..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Fajls ta' backup fil-ħard disk..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Ħu backup ta' fajls tal-users..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Progress tal-backup lill-ħard disk..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Ħu backup ta' fajls oħrajn..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"lista ta' fajls mibgħuta bl-FTP : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Problema fil-konnessjoni FTP. Ma kienx possibbli nibgħat il-fajls bl-"
-"FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Problema biex jintbagħat imejl. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Għażla ta' fajls"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Agħżel fajls jew direttorju u klikkja \"Żid\""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Jekk jogħġbok immarka l-għażliet kollha li għandek bżonn.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Dawn l-għażliet jieħdu backup u jirrestawraw il-fajls kollha tad-direttorju /"
-"etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Ħu backup tal-fajls tas-sistema (direttorju /etc)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Uża backups inkrementali  (tħassarx l-antiki)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Tinkludix fajls kritiċi (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"B'din l-għażla tkun tista' tirrestawra kwalinkwa verżjoni\n"
-"tad-direttorju /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Jekk jogħġbok agħżel il-users kollha li trid tinkludi f'dan il-backup."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Tinkludix il-cache tal-browser"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Uża backups inkrementali  (tħassarx l-antiki)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Neħħi l-magħżula"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Users"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Uża konnessjoni FTP għall-backup"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Jekk jogħġbok daħħal l-isem jew IP tal-kompjuter."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Jekk jogħġbok daħħal id-direttorju fejn\n"
-" trid tpoġġi l-backup fuq il-kompjuter."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Jekk jogħġbok daħħal il-login"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Jekk jogħġbok daħħal il-password"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Ftakar dan il-password"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "Konnessjoni FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Konnessjoni żgura"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Uża CD/DVDROM għall-backup"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Jekk jogħġbok agħżel id-daqs tas-CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Jekk jogħġbok immarka hawn jekk qed tuża medja CDRW"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Jekk jogħġbok immarka hawn jekk trid tħassar is-CDRW qabel"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Jekk jogħġbok immarka hawn jekk trid tinkludi\n"
-" boot tal-installazzoni fuq is-CD."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Jekk jogħġbok daħħal l-isem tal-apparat CD Writer\n"
-" eż: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Uża tape għall-backup"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Jekk jogħġbok daħħal l-isem tal-apparat għall-backup"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Jekk jogħġbok daħħal id-daqs massimu\n"
-" permess għal DrakBackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Jekk jogħġbok daħħal id-direttorju fejn tikteb:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Uża kwota għall-fajls tal-backup."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Network"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Ħard disk / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "kull siegħa"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "kuljum"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "kull ġimgħa"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "kull xahar"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Uża daemon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Jekk jogħġbok agħżel l-intervall\n"
-"ta' ħin għal kull backup"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Jekk jogħġbok agħżel\n"
-"il-medja għall-backup."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Uża ħard disk bid-daemon"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Uża FTP bid-daemon"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Aċċerta li d-daemon \"cron\" huwa nkluż fis-servizzi."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Ibgħat rapport bl-imejl wara kull backup lill:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Xiex"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Fejn"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Meta"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Iżjed għażliet"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Konfigurazzjoni DrakBackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Jekk jogħġbok agħżel fejn trid tieħu backup"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "fuq ħard disk"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "fuq in-network"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Jekk jogħġbok agħżel ta' xiex trid tieħu backup"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Ħu backup tas-sistema"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Ħu backup tal-users"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Agħżel user manwalment"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Sorsi tal-backup: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Fajls tas-sistema:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Fajls tal-user:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Fajls oħrajn:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Ikteb fuq ħard disk fid-direttorju : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Ikteb bl-FTP fuq kompjuter : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t isem ta' user: %s\n"
-"\t\t fuq direttorju: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Għażliet:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tTinkludix fajls tas-sistema\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackups jużaw tar u bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackups jużaw tar u gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Daemon (%s) include :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Ħard disk.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Network bl-FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Network bl-SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ebda konfigurazzjoni, agħżel Saħħar jew Avvanzat\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lista ta' informazzjoni x'tirrestawra:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lista ta' informazzjoni korrotta:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Jekk jogħġbok neħħiha d-darba li jmiss."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Fajls tal-backup ġew korrotti"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "           L-informazzjoni kollha magħżula ġiet..........."
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "         restawrata għal fuq %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "      Konfigurazzjoni ta' restawr....."
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK biex tirrestawra fajls oħra."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Lista ta' users x'tirrestawra (l-iżjed data riċenti ta' kull user biss "
-"importanti)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Ħu backup ta' fajls tas-sistema qabel:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "jekk jogħġbok agħżel data biex tirrestawra"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Uża ħard disk għal backup"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Irrestawra mill-ħard disk"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Jekk jogħġbok daħħal id-direttorju fejn qegħdin il-backups"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Agħżel media ieħor biex tirrestawra minnu"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Media oħrajn"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Irrestawra sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Irrestawra users"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Irrestawra ieħor"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "Agħżel direttorju biex tirrestawra (minnflok / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Agħmel backup ġdid qabel tirrestawra (għal backups inkrementali biss)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Neħħi d-direttorji tal-users qabel tirrestawra."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Irrestawra l-backups kollha"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Restawr personalizzat"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Għajnuna"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Ta' qabel"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Ikteb"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Ibni backup"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Irrestawra"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Li jmiss"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Jekk jogħġbok ibni backup qabel tirrestawraha...\n"
-" jew ivverifika li d-direttorju huwa tajjeb."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Problema waqt sendmail\n"
-"  ir-rapport ma ntbagħatx.\n"
-"  Jekk jogħġbok ikkonfigura s-sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lista ta' pakketti x'tinstalla"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Problema biex jintbagħat fajl bl-FTP.\n"
-" Jekk jogħġbok ikkoreġi l-konfigurazzjoni FTP."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Jekk jogħġbok agħżel informazzjoni x'tirrestawra"
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Jekk jogħġbok agħżel media għall-backup..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Jekk jogħġbok agħżel informazzjoni x'tikkopja"
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Ebda fajl ta' konfigurazzjoni ma nstab.\n"
-"Agħżel Saħħar jew Avvanzat."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Qed jiġi żviluppat... stenna ftit."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Ħu backup tal-fajls tas-sistema"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Ħu backup tal-fajls tal-users"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Ħu backup ta' fajls oħrajn"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Progress totali"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "qed jintbagħatu fajls bl-FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Qed nibgħat fajls..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Lista ta' informazzjoni x'tinkludi fuq is-CDROM"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Jekk jogħġbok daħħal il-veloċità tas-CD Writer"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Jekk jogħġbok daħħal l-isem tal-apparat tas-CD Writer (eż, 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr ""
-"Jekk jogħġbok ittikkja jekk trid tinkludi \"boot\" tal-installazzjoni fuq is-"
-"CD."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Ħu backup issa minn fajl ta' konfigurazzjoni"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Ara Konfigurazzjoni Backup."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Konfigurazzjoni b'Saħħar"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Konfigurazzjoni Avvanzata"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Ħu Backup Issa"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"deskrizzjoni ta' l-għażliet:\n"
-"\n"
-" F'dan il-pass Drakbackup iħallik tbiddel:\n"
-"\n"
-" - It-tip ta' kompressar:\n"
-"    \n"
-"      Jekk tagħżel kompressar bzip2, tikkompressa l-\n"
-"      informazzjoni tiġi kompressata aħjar minn gzip (madwar \n"
-"      2-10 %). Din l-għażla mhijiex magħżula impliċitament \n"
-"      għax tieħu iżjed ħin (madwar 1000% iżjed).\n"
-"\n"
-" - Modalità aġġornament:\n"
-"\n"
-"      Din l-għażla taġġornalek backup, imma m'hijiex utli \n"
-"      ħafna għax trid terġa' tiftaħ il-backup kollu biex \n"
-"      taġġornah.\n"
-"\n"
-" - Modalità \".backupignore\":\n"
-"\n"
-"      Simili għas-CVS, Drakbackup jaqbeż dawk ir-riferenzi \n"
-"      kollha li hemm fil-fajls .backupignore f'kull direttorju.\n"
-"      eż:\n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Xi problemi waqt sendmail huma kkawżati minn konfigurazzjoni\n"
-" ħażina ta' postfix. Biex issolviha trid tissettja myhostname \n"
-" jew mydomain fil-fajl /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"deskrizzjoni ta' l-għażliet:\n"
-"\n"
-" - Ħu backup tal-fajls tas-sistema:\n"
-"\n"
-"\tDin l-għażla tħallik tieħu kopja tad-direttorju /etc,\n"
-"\tli fih il-fajls kollha tal-konfigurazzjoni tas-sistema.\n"
-"\tJekk jogħġbok oqgħod attent waqt il-pass ta' restawr li\n"
-"\tma tħassarx:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Ħu backup tal-fajls tal-users:\n"
-"\n"
-"\tDin l-għażla tħallik tagħżel il-users kollha li trid tieħu\n"
-"\tbackup tagħhom. Biex tnaqqas l-ispazju li jintuża, mhux \n"
-"\trakkomandat li tinkludi l-cache tal-web browser.\n"
-"\n"
-" - Ħu backup ta' fajls oħra:\n"
-"\tDin l-għażla tħallik iżżid informazzjoni oħra x'tikkopja.\n"
-"\tB'dan il-backup m'hux possibbli tagħżel \"backup inkrementali\"\n"
-"\tgħalissa.\n"
-"\n"
-" - Backup inkrementali:\n"
-"\n"
-"\tIl-backup inkrementali huwa l-iżjed metodu b'saħħtu \n"
-"\tgħall-backups. Din l-għażla tħallik tieħu backup tal-\n"
-"\tinformazzjoni kollha l-ewwel darba, u wara tieħu kopja\n"
-"\tbiss ta' dak li nbidel.\n"
-"\tWara, tkun tista', waqt il-pass ta' restawr, li\n"
-"\ttirrestawra biss dak li nbidel minn ċertu data.\n"
-"\tJekk qatt ma għażilt din l-għażla qabel, il-backups\n"
-"\tantiki kollha jiġu mħassra qabel kull backup.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"deskrizzjoni tar-restawr:\n"
-"\n"
-"L-iżjed data riċenti biss tintuża, għax bil-backups inkrementali\n"
-"huwa neċessarju li tirrestawra l-backups antiki wieħed wieħed.\n"
-"\n"
-"Għalhekk jekk ma tridx tirrestawra user jekk jogħġbok neħħi l-marka miċ-"
-"checkbox tiegħu.\n"
-"\n"
-"Altrimenti, tista' tagħżel biss wieħed minn dawn:\n"
-"\n"
-" - Backups inkrementali\n"
-"\n"
-"\tIl-backup inkrementali huwa l-iżjed metodu b'saħħtu \n"
-"\tgħall-backups. Din l-għażla tħallik tieħu backup tal-\n"
-"\tinformazzjoni kollha l-ewwel darba, u wara tieħu kopja\n"
-"\tbiss ta' dak li nbidel.\n"
-"\tGħalhekk huwa possibbli waqt il-pass ta' restawr, li\n"
-"\ttirrestawra biss dak li nbidel minn ċertu data.\n"
-"\tJekk qatt ma għażilt din l-għażla qabel, il-backups\n"
-"\tantiki kollha jiġu mħassra qabel kull backup.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft ta' DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Dan il-programm huwa softwer ħieles; tista' tiddistribwih u/jew tibdlu\n"
-" skond it-termini tal-Liċenzja Ġenerali Pubblika (GPL) GNU, kif "
-"ippubblikata\n"
-" mill-Free Software Foundation; jew verjoni 2 tal-liċenzja, jew (skond il-\n"
-" ġudizzju tiegħek) waħda iżjed riċenti.\n"
-"\n"
-" Dan il-programm huwa distribwit bl-isperanza li jkun utli, imma\n"
-" MINNGĦAJR EBDA GARANZIJA; minngħajr saħansitra l-garanzija impliċita \n"
-" ta' MERKANTABILITÀ jew LI HU ADEGWAT GĦAL UZU PARTIKULARI. Ara\n"
-" l-Liċenzja Ġenerali Pubblika GNU (GNU General Public License) għal iżjed\n"
-" dettalji.\n"
-"\n"
-" Għandek tirċievi kopja tal-Liċenzja Ġenerali Pubblika GNU flimkien ma' dan\n"
-" il-programm. Jekk le, ikteb lill-Free Software Foundation, Inc., \n"
-" 59, Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Deskrizzjoni:\n"
-"\n"
-"  Drakbackup jintuża biex jieħu kopja \"backup\" tas-sistema.\n"
-"  Waqt il-konfigurazzjoni tista' tagħżel \n"
-"\t- Fajls tas-sistema, \n"
-"\t- Fajls tal-users, \n"
-"\t- Fajls oħrajn\n"
-"\tjew Sistema kollha ... u Oħrajn (bħal partizzjonijiet tal-Windows)\n"
-"\n"
-"  Drakbackup iħallik tpoġġi din il-backup fuq:\n"
-"\t- Ħard disk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (bl-autoboot, rescue u awto-installazzjoni).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup iħallik tirrestawra s-sistema għal ġo direttorju\n"
-"  li jagħżel il-user.\n"
-"\n"
-"  Impliċitament, il-backups jitpoġġew fid-direttorju\n"
-"  /var/lib/drakbackup\n"
-"\n"
-"  fajl ta' konfigurazzjoni:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Pass ta' restawrazzjoni:\n"
-"\n"
-"  Waqt il-pass ta' restawrazzjoni, Drakbackup iħassar id-\n"
-"  direttorju oriġinali u jivverifika li l-fajls tal-backup\n"
-"  ma ġewx korrotti. Huwa rakkomandat li tieħu backup ieħor\n"
-"  qabel tibda' tirrestawra.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"deskrizzjoni tal-għażliet:\n"
-"\n"
-"Jekk jogħġbok oqgħod attent meta tuża backup bl-ftp, għax\n"
-"dawk il-backups li huma mibnija biss jintbagħatu fuq is-server.\n"
-"Għalhekk għalissa, trid tibni l-backup fuq il-ħard disk qabel\n"
-"jintbagħat lis-server.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problemi ta' restawr ta' backup:\n"
-"\n"
-"Waqt il-pass ta' restawr, Drakbackup jivverifika l-fajls \n"
-"kollha tal-backup qabel jirrestawrahom. Qabel \n"
-"ir-restawr,.Drakbackup ineħħi d-direttorju oriġinali, u \n"
-"tista' titlef l-informazzjoni kollha. Huwa mportanti li\n"
-"toqgħod attent u ma tbiddilx il-fajls tal-backup manwalment.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Deskrizzjoni:\n"
-"\n"
-"  Drakbackup jintuża biex jieħu kopja \"backup\" tas-sistema.\n"
-"  Waqt il-konfigurazzjoni tista' tagħżel \n"
-"\t- Fajls tas-sistema, \n"
-"\t- Fajls tal-users, \n"
-"\t- Fajls oħrajn\n"
-"\tjew Sistema kollha ... u Oħrajn (bħal partizzjonijiet tal-Windows)\n"
-"\n"
-"  Drakbackup iħallik tpoġġi din il-backup fuq:\n"
-"\t- Ħard disk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (bl-autoboot, rescue u awto-installazzjoni).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup iħallik tirrestawra s-sistema għal ġo direttorju\n"
-"  li jagħżel il-user.\n"
-"\n"
-"  Impliċitament, il-backups jitpoġġew fid-direttorju\n"
-"  /var/lib/drakbackup\n"
-"\n"
-"  fajl ta' konfigurazzjoni:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Pass ta' restawrazzjoni:\n"
-"\n"
-"  Waqt il-pass ta' restawrazzjoni, Drakbackup iħassar id-\n"
-"  direttorju oriġinali u jivverifika li l-fajls tal-backup\n"
-"  ma ġewx korrotti. Huwa rakkomandat li tieħu backup ieħor\n"
-"  qabel tibda' tirrestawra.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "L-installazzjoni ta' %s falliet. Dan kien il-messaġġ:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Fittex fonts installati"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Neħħi l-marka minn fonts installati"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "fittex fonts kollha"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "ma stabux fonts"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "lest"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "ma stajtx insib fonts fuq il-partizzjonijiet immuntati"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Erġa' agħżel fonts tajbin"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "ma stajtx insib fonts.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Fittex fonts fil-lista ta' nstallati"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Ikkupjar ta' fonts"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installazzjoni ta' fonts TrueType"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "stenna sakemm għaddej ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Installazzjoni TrueType lest"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konverżjoni ta' fonts"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "qed nibni type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Riferenzi għall-Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "Konverżjoni ta' fonts ttf"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "Konverżjoni ta' fonts pfm"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Issopprimi fajls temporanji"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Irristartja XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Issopprimi fajls ta' fonts"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "ristartja l-xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Qabel tinstalla fonts, kun ċert li għandek id-dritt tużahom u tinstallahom "
-"fuq is-sistema.\n"
-"\n"
-"-Tista' tinstalla fonts bis-sistema normali. F'każi rari, fonts ħżiena "
-"jistgħu iwaħħlulek is-server X."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Importazzjoni ta' fonts"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Ġib fonts mill-Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Neħħi fonts"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Għażliet avvanzati"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Lista ta' fonts"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Agħżel il-programmi li se jużaw il-fonts :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Printers ġeneriċi"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Agħżel il-fajl tal-font jew direttorju u agħfas \"Żid\""
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Installa lista"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "Klikkja hawn jekk inti ċert"
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "Klikkja hawn jekk m'intix ċert."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Xejn magħżul"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Kollox magħżul"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Neħħi lista"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Testijiet preliminari"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Ikkopja fonts għas-sistema"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Installa u kkonverti fonts"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Wara l-installazzjoni"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Neħħi fonts mis-sistema"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Wara t-tneħħija"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Qsim tal-konnessjoni tal-internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Il-qsim tal-konnessjoni tal-internet huwa mixgħul"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Il-konfigurazzjoni tal-qsim tal-konnessjoni tal-internet diġà sar.\n"
-"Bħalissa huwa mixgħul.\n"
-"\n"
-"X'tixtieq tagħmel?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "itfi"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "ikkanċella"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ri-konfigura"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Qed inniżżel is-servers..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Il-qsim tal-konnessjoni tal-internet issa mitfi"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Il-qsim tal-konnessjoni tal-internet huwa mitfi"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Il-konfigurazzjoni tal-qsim tal-konnessjoni tal-internet diġà sar.\n"
-"Bħalissa huwa mitfi.\n"
-"\n"
-"X'tixtieq tagħmel?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "ħaddem"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Qed intella' s-servers..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Qsim tal-konnessjoni tal-internet issa mixgħul."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Se tikkonfigura l-kompjuter biex jaqsam il-konnessjoni tal-internet.\n"
-"B'din il-faċilità, kompjuters oħra fuq in-network tiegħek ikunu jistgħu "
-"jużaw il-konnessjoni mal-internet ta' dan il-kompjuter.\n"
-"\n"
-"Nota: irid ikollok adattur tal-internet dedikat biex tissettja n-network "
-"lokali (LAN)"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfaċċja %s (tuża modulu %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfaċċja %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Ebda adattur tan-network fuq is-sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ebda adattur tan-network ethernet ma nstab fuq is-sistema tiegħek. Jekk "
-"jogħġbok ħaddem l-għodda tal-konfigurazzjoni tal-ħardwer."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interfaċċja tan-network"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Hemm biss adattur wieħed fuq is-sistema tiegħek:\n"
-"\n"
-"%s\n"
-"\n"
-"Se nissettja n-network lokali fuq dak l-adattur."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Jekk jogħġbok agħżel liema adattur tan-network se jkun imqabbad man-network "
-"lokali (LAN)."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Interfaċċja tan-network diġà konfigurata"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Twissija, l-adattur tan-network (%s) diġà konfigurat.\n"
-"\n"
-"Trid ri-konfigurazzjoni awtomatika?\n"
-"\n"
-"Tista' tagħmilha manwalment imma trid tkun taf x'qed tagħmel."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Ri-konfigurazzjoni awtomatika"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Uri l-konfigurazzjoni kurrenti tal-interfaċċja"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Konfigurazzjoni kurrenti ta' \"%s\":\n"
-"\n"
-"Network: %s\n"
-"Indirizz IP: %s\n"
-"Attribuzzjoni IP: %s\n"
-"Driver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Nista; nżomm il-konfigurazzjoni kurrenti u nassumi li diġà ssettjajt server "
-"DHCP; f'dak il-każ ikkonferma li qrajt l-indirizz tan-network klassi C sew; "
-"Ma nerġax nikkonfiguraha u ma mmissx il-konfigurazzjoni tas-server DHCP.\n"
-"\n"
-"Inkella, nista' nerġa nikkonfigura l-interfaċċja u nissettjalek server "
-"DCHP.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Network lokali klassi C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP ta' dan is-server DHCP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Erġa' kkonfigura l-interfaċċja u s-server DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "In-network lokali ma jispiċċax b' \".0\", ħiereġ 'il barra."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Possibbilment hemm konflitt fl-indirizz LAN fil-konfigurazzjoni ta' %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Instabet konfigurazzjoni ta' firewall!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Twissija: Instabet konfigurazzjoni eżistenti ta' firewall. Għandek mnejn "
-"tkun trid tirranġaha manwalment wara l-installazzjoni."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Qed nikkonfigura..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Qed nikkonfigura scripts, ninstalla softwer u ntella' servers..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemi fl-installazzjoni tal-pakkett %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Kollox ġie konfigurat.\n"
-"Issa tista taqsam konnessjonijiet ma' kompjuters oħra fuq in-network lokali, "
-"permezz tal-faċilità ta' konfigurazzjoni awtomatika (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Dan il-konfigurazzjoni diġà sar, imma bħalissa mitfi."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Dan il-konfigurazzjoni diġà sar, u bħalissa attivat."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Ebda qsim tal-konnessjoni għadu ma ġie konfigurat."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Konfigurazzjoni tal-qsim tal-konnessjoni mal-internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Merħba għall-Faċilità ta' Qsim tal-Konnessoni tal-Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Ikklikkja \"Ikkonfigura\" biex tħaddem is-saħħar tal-konfigurazzjoni."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Konfigurazzjoni network (%d adattur/i)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Ħassar profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil xi tħassar:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Profil ġdid..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "Isem tal-profil ġdid (il-profil il-ġdid ikun kopja ta' dak kurrenti) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Isem tal-kompjuter: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Aċċess għall-internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tip:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfaċċja:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Stat:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Stenna ftit"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Ikkonfigura l-aċċess għall-internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Konfigurazzjoni LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfaċċja"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Stat"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Ikkonfigura network lokali (LAN)..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Klikkja hawn biex tħaddem is-saħħar ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Saħħar..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Applika"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Stenna ftit... qed napplika l-konfigurazzjoni"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Imqabbad"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Mhux imqabbad"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Aqbad..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Aqta'..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Twissija: instabet konnessjoni oħra tal-Internet, forsi qed tuża n-network "
-"tiegħek"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"M'għandek ebda interfaċċja konfigurata.\n"
-"L-ewwel ikkonfigurahom billi tikklikkja \"ikkonfigura\""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Konfigurazzjoni LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adattur %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protokoll Boot"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Tella' fil-bidu"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Klijent DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "ixgħel issa"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "itfi issa"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Din l-interfaċċja għadha ma ġietx konfigurata.\n"
-"Ħaddem is-saħħar tal-konfigurazzjoni mill-window ewlenija"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Għad m'għandekx konnessjoni mal-internet.\n"
-"Oħloq waħda billi tikklikkja \"Ikkonfigura\""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfigurazzjoni tal-konnessjoni internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfigurazzjoni tal-konnessjoni internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tip ta' konnessjoni: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Kard Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Klijent DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Livell ta' Sigurtà"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Ċentru tal-Kontroll"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Agħżel l-għodda li trid tuża"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "Stati Uniti (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "Stati Uniti (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "Stati Uniti (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Ċina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Ġappun (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Ġappun (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Ewropa tal-Lvant"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlanda"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Ewropa tal-Punent"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Awstralja"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "New Zealand"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Afrika t'Isfel"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Arġentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Jekk jogħġbok,\n"
-"daħħal it=\"TV norm\" u l-pajjiż"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV norm :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Reġjun :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Tfittix għal stazzjonijiet tat-TV għaddej"
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Qed infittex stazzjonijiet tat-TV"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "użu: keyboarddrake [--expert] [tastiera]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Jekk jogħġbok, agħżel it-tqassim tat-tastiera."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Trid li l-Backspace tirritorna Delete fuq il-konsol?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Ibdel is-CD"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Jekk jogħġbok daħħal is-CD tal-installazzjoni fid-drive u agħfas Ok meta\n"
-"tlesti. Jekk m'għandekx is-CD agħfas \"Ikkanċella\" biex tevita l-"
-"aġġornament."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ma stajtx nibda' l-aġġornament \"live\"!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Il-bidliet saru, imma biex ikunu effettivi trid tilloggja 'l barra"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Uri għall-ġurnata magħżula biss"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/File/_Ġdid"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/File/_Iftaħ"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/File/I_kteb"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/File/Ikteb b'isem _ġdid"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fajl/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/Għa_żliet"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Għażliet/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Għajnuna"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Għajnuna/_Dwar..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "User"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Messaġġi"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Spjegazzjoni tal-għodda Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "fittex"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Għodda biex tifli l-logs"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Setings"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "li jaqblu"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "li ma jaqblux"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Agħżel fajl"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalendarju"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Kontenut tal-fajl"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Twissija Imejl/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "stenna ftit... qed jinqara l-fajl: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Konfigurazzjoni Imejl/twissijiet SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Merħba għall-għodda tal-konfigurazzjoni imejl/SMS.\n"
-"\n"
-"Hawn, tista' tissettja s-sistema tal-allerti.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "seting tas-servizz"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Tirċievi twissija jekk wieħed minn dawn is-servizzi ma jibqax jaħdem"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "seting tat-tagħbija"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Tirċievi twissija jekk it-tagħbija taqbeż dan il-valur"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "konfigurazzjoni tal-allerti"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Ikkonfigura l-mod kif is-sistema tibgħatlek twissijiet"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Ikteb b'isem ġdid..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Jekk jogħġbok agħżel it-tip ta' maws."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "Ebda serial_usb ma nstab\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emula t-tielet buttuna?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s instab fuq %s, trid tikkonfigurah?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Agħżel skaner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Dan l-iskaner %s mhux sapportit"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Diska/apparat \"boot\""
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Dan l-iskaner %s irid jiġi konfigurat minn printerdrake.\n"
-"Tista' tħaddem lill printerdrake miċ-Ċentru tal-Kontroll Mandrake fis-"
-"sezzjoni Ħardwer."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Konfigurazzjoni tal-Firewall"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Konfigurazzjoni tal-firewall"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Diġà għandek firewall issettjat.\n"
-"Klikkja fuq \"ikkonfigura\" biex tbiddel jew tneħħi l-firewall."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Klikkja fuq \"ikkonfigura\" biex tissettja firewall standard."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Agħżel il-lingwa"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Agħżel klassi ta' installazzjoni"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Għarfien tal-ħard disk"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Ikkonfigura l-maws"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Agħżel tastiera"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sigurtà"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Issettja filesystems"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Ifformattja partizzjonijiet"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Agħżel pakketti biex tinstalla"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installa s-sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Żid user"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Ikkonfigura network"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Ikkonfigura servizzi"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Installa bootloader"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Oħloq \"boot disk\""
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Ikkonfigura X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Installa aġġornamenti tas-sigurtà"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Oħroġ mill-installazzjoni"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Konfiguratur tinyfirewall\n"
-"\n"
-"Dan jikkonfigura firewall personali għal din is-sistema Mandrake Linux.\n"
-"Għal kompjuter firewall dedikat, jekk jogħġbok ara d-distribuzzjoni\n"
-"speċjalizzata MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Issa se nistaqsuk mistoqsijiet dwar liema servizzi tixtieq tħalli\n"
-"lill ħaddieħor jaċċessa mill-internet. Jekk jogħġbok aħseb sew dwar \n"
-"dawn il-mistoqsijiet, għax is-sigurtà tal-kompjuter huwa mportanti.\n"
-"\n"
-"Jekk m'intix qed tuża wieħed minn dawn is-servizzi, agħżel \"Le\".\n"
-"Tista' tbiddel il-konfigurazzjoni meta trid billi terġa' tħaddem dan\n"
-"il-programm."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Int qed tħaddem \"web server\" fuq dan il-kompjuter li tridu jkun\n"
-"aċċessibbli għall-Internet? Jekk qed tħaddem web server li jiġi\n"
-"aċċessat biss mill-istess kompjuter tista' tagħżel \"Le\" hawn.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Int qed tħaddem name server (DNS) fuq din il-magna? Jekk ma ssettjajtx\n"
-"wieħed biex joffri informazzjoni dwar IP u żoni lill-internet kollu,\n"
-"agħżel \"Le\".\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Tixtieq tħalli konnessjonijiet ssh (Secure Shell) deħlin? Dan\n"
-"jieħu post it-telnet li tista' tuża biex taċċessa l-kompjuter\n"
-"remotament. Jekk kont qed tuża telnet, definittivament aqleb għall-\n"
-"ssh. Telnet mhuwiex iċċifrat, għalhekk ħaddieħor jista' jisraq il-\n"
-"password. Ssh huwa ċċifrat u ma jippermettix min jissemma'."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Trid tħalli konnessjonijiet tat-telnet deħlin?\n"
-"Dan il-metodu huwa perikoluż ħafna, għax il-password tista' tinqara\n"
-"minn ħaddieħor. Aħna nirrakkomandaw li tirrispondi \"Le\" u tuża l-\n"
-"ssh minnflok it-telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Qed tħaddem server FTP li tridu jkun aċċessibbli mill-internet? Jekk\n"
-"iva, aħna nirrakkomandaw li dan jintuża biss għal trasferiment anonimu.\n"
-"Il-passwords li jintużaw bl-FTP jistgħu jinsterqu minn terzi persuni,\n"
-"peress li l-FTP ma jiċċifrax il-passwords meta jibgħathom.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Qed tħaddem server tal-imejl hawn? Jekk qed tibgħat il-messaġġi\n"
-"bil-pine, mutt jew klijent ieħor testwali (mhux grafiku), aktarx\n"
-"iva. Altrimenti jaqbillek tagħżel \"le\".\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Qed tħaddem server POP jew IMAP? Dan jintuża biex tipprovdi\n"
-"imejl lill nies oħra mill-kompjuter tiegħek.\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Jidher li qed tuża kernel 2.2.  Jekk in-numru IP tan-network\n"
-"huwa ssettjat awtomatikament minn kompjuter ieħor id-dar jew\n"
-"fl-uffiċċju (assenjat dinamikament), irridu nieħdu ħsiebu. Dan\n"
-"huwa l-każ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Il-kompjuter tiegħek jissinkronizza l-ħin ma' kompjuter ieħor?\n"
-"Normalment, dan jintuża minn organizzazzjonijiet kbar ibbażati\n"
-"fuq il-Unix/Linux, biex jissinkronizzaw il-kompjuters. Jekk m'\n"
-"intix fuq sistema kbira u qatt ma smajt b'dan, aktarx li m'initx."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurazzjoni lesta.  Nistgħu niktbu dawn il-bidliet fuq id-diska?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ma jistax jinfetaħ %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ma jistax jinfetaħ %s għall-kitba: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Konfigurazzjoni tal-Firewall"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Stenna ftit, qed nipprepara l-installazzjoni"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Kompjuter fuq network (klijent)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servers NFS, SMB, Proxy, ssh"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Uffiċċju"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Għodda għall-Palm Pilot jew Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Workstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domain Name u Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programmi tal-uffiċċju: wordprocessors (kword, abiword), spreadsheet "
-"(kspread, gnumeric) eċċ"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Għodda relatati mal-awdjo: biex iddoqq mp3 u midi, miksers, eċċ"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Kotba u \"HOWTO\" dwar il-Linux u Softwer Ħieles"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, eċċ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Sett ta' programmi għal imejl, newsgroups, web, trasferiment ta' fajls u chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Server tad-database PostgreSQL jew MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Għodda biex tiffaċilita l-konfigurazzjoni tal-kompjuter"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - awdjo"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Għodda"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentazzjoni"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Għodda tal-konsol"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Server tal-imejl Postfix, news server Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfigurazzjoni"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Desktops grafiċi oħrajn (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, l-interfaċċja grafika bażi, b'għażla ta' għodda "
-"jakkumpanjawha"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ambjent Grafiku"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Għodda biex toħloq u taħraq CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kompjuter tal-Uffiċċju"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, eċċ"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programmi grafiċi bħal GIMP"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Libreriji, programmi u fajls għal żviluppar C u C++"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Kompjuter Server tan-Network"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Imejl/Groupware/Newsgroups"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Logħob"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Programmi għad-daqq u editjar ta' video"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programmi ta' divertiment: logħob tal-arcades, karti, strateġija eċċ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Sett għodda biex taqra u tibgħat imejl u \"news\", u biex tibbrawżja l-web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arkivjar, emulaturi u monitors"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanzi Personali"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Ambjent grafiku b' għażla ta' programmi u għodda faċli"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klijenti għal protokolli differenti, eż. SSH"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Gateway tal-internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programmi għad-daqq u editjar ta' awdjo u video"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Desktops Grafiċi Oħrajn"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Edituri, shells, għodda tal-fajls, terminals"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmi biex timmaniġġja l-finanzi personali"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Maniġġjar ta' Informazzjoni Personali"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - Ħruq ta' CDs"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Xjentifiku"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Tista' tipprovdi l-għażliet lill-modulu %s."
-
-#~ msgid "mount failed"
-#~ msgstr "immuntar falla"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Ma nistax naċċessa l-moduli tal-kernel li jikkorrispondu mal-kernel "
-#~ "tiegħek (fajl %s nieqes)"
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-*-*-medium-r-normal-*-12-*-*-*-p-*-iso8859-3,*-r-*"
-
-#~ msgid "None"
-#~ msgstr "Ebda"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Agħżel printer impliċitu!"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Applika/erġa' aqra' printers"
-
-#~ msgid "About"
-#~ msgstr "Dwar"
-
-#~ msgid "             Help           "
-#~ msgstr "           Għajnuna         "
diff --git a/perl-install/share/po/nl.po b/perl-install/share/po/nl.po
deleted file mode 100644
index 9270f3cfd..000000000
--- a/perl-install/share/po/nl.po
+++ /dev/null
@@ -1,12264 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999-2000 Mandrakesoft
-# Jo <rainbow@linuxfan.com>, 1999
-# Tom Laermans <sidewinder@linuxfreak.com>, 2000
-# Niels Gras <niels.gras@wanadoo.nl>, 2000
-# Reinout van Schouwen <reinout@cs.vu.nl>, 2001, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-01 01:34+0100\n"
-"Last-Translator: Reinout van Schouwen <reinout@cs.vu.nl>\n"
-"Language-Team: Dutch <vertaling@nl.linux.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configureer alle koppen afzonderlijk"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Gebruik Xinerama-uitbreiding"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configureer alleen kaart \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Multi-koppen configuratie"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Uw systeem ondersteunt een configuratie met meerdere koppen.\n"
-"Want wenst u te doen?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafische kaart"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Selecteer een grafische kaart"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Selecteer een X-server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X-Server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Kiest u een X-stuurprogramma"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X-stuurprogramma"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Welke configuratie van XFree wilt u hebben?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Uw kaart kan 3D acceleratie ondersteuning krijgen, maar alleen met XFree %"
-"s.\n"
-"Uw kaart wordt ondersteund door XFree %s, welke betere ondersteuning zou \n"
-"kunnen hebben in 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Uw kaart kan 3D acceleratie ondersteuning krijgen met XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s met 3D hardware acceleratie"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Uw kaart kan 3D acceleratie ondersteuning krijgen met XFree %s.\n"
-"LET OP: DIT IS EEN EXPERIMENTELE ONDERSTEUNING, WELKE UW COMPUTER KAN "
-"LATEN \n"
-"VASTLOPEN."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s met EXPERIMENTELE 3D hardware acceleratie"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Uw kaart kan 3D hardware acceleratie ondersteuning hebben, maar alleen met \n"
-"XFree %s, LET OP: DIT IS EEN EXPERIMENTELE ONDERSTEUNING, WELKE UW "
-"COMPUTER \n"
-"KAN LATEN VASTLOPEN.\n"
-"Uw kaart wordt ondersteund door XFree %s, welke betere ondersteuning zou \n"
-"kunnen hebben in 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installatie beeldscherm-stuurprogramma"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree configuratie"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Selecteer de geheugengrootte van uw grafische kaart"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Selecteer de opties voor de X-server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Selecteer een monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"De twee cruciale parameters zijn de verticale verversingsratio, d.w.z.\n"
-"de snelheid waarmee het volledige scherm wordt ververst en nog "
-"belangrijker \n"
-"de horizontale sync ratio, dit is de snelheid waaraan de scanlijnen worden\n"
-"geschreven\n"
-"\n"
-"Het is UITERMATE BELANGRIJK dat u geen monitor type opgeeft die een sync "
-"bereik\n"
-"heeft die de mogelijkheden van uw monitor overschrijdt: u kan uw monitor\n"
-"beschadigen.\n"
-"Bij twijfel maakt u best een voorzichtige keuze."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontale verversingsratio"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Verticale verversingsratio"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor niet geconfigureerd"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafische kaart nog niet geconfigureerd"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Resoluties nog niet gekozen"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Wenst u de configuraties te testen?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Waarschuwing: door deze grafische kaart te testen, kan uw computer vastlopen"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Configuratie Testen"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"probeer enkele parameters aan te passen"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Er is een fout opgetreden:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Verdwijnt binnen %d seconden"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Is dit de juiste instelling?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Er is een fout opgetreden, probeer een aantal parameters aan te passen"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolutie"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Kies resolutie en kleurdiepte"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafische kaart: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86-server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Meer"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Expert modus"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Toon alles"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resoluties"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Toetsenbord instelling: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muistype: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muis: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor Horizontale Sync: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor verticale verversing: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafische kaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identificatie grafische kaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Videogeheugen: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kleurdiepte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolutie: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86-server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 stuurprogramma: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Bezig met het voorbereiden van de X-Window configuratie"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Wat wenst u te doen?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Verander Monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Verander grafische kaart"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Verander Server-opties"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Resolutie wijzigen"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Informatie tonen"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Opnieuw testen"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Be�indig"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Veranderingen bewaren?\n"
-"De huidige configuratie is:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X bij opstarten"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ik kan uw computer instellen om automatisch X te starten bij opstarten.\n"
-"Wenst u X te starten bij het opstarten?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Gelieve opnieuw in te loggen op %s om de wijzigingen te activeren"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Gelieve uit te loggen en daarna Ctrl-Alt-Backspace te gebruiken"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kleuren (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32.000 kleuren (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65.000 kleuren (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljoen kleuren (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljard kleuren (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB of meer"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standaard VGA, 640x480 aan 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 aan 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Compatibel, 1024x768 aan 87 Hz interlaced (geen 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 aan 87 Hz interlaced, 800x600 aan 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 aan 60 Hz, 640x480 aan 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 aan 60 Hz, 800x600 aan 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 aan 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency in staat om 1280x1024 aan 60 Hz weer te geven"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency in staat om 1280x1024 aan 74 Hz weer te geven"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency in staat om 1280x1024 aan 76 Hz weer te geven"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Multi-frequency in staat om 1600x1200 aan 70 Hz weer te geven"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Multi-frequency in staat om 1600x1200 aan 76 Hz weer te geven"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Eerste sector van boot-partitie"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Eerste sector van station (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO Installatie"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Waar wenst u de bootloader te installeren?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub-installatie"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO met tekst-menu"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO met grafisch menu"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Opstarten vanuit DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Bootloader algemene opties"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Welke bootloader te gebruiken"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Bootloader installatie"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Boot-apparaat"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (werkt niet met oude BIOS'en)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video-modus"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Pauze voor het opstarten van standaard-beeld"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Wachtwoord"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Wachtwoord (nogmaals)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Commandoregel-opties beperken"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "beperken"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Elke keer bij opstarten /tmp legen"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Juiste RAM-grootte (indien nodig) (%d MB gevonden)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Meerdere profielen inschakelen"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Geef de RAM-grootte in MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"De optie ``Commandoregel-opties beperken'' heeft geen nut zonder wachtwoord"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Gelieve opnieuw te proberen"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "De wachtwoorden kloppen niet met elkaar"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Initialisatie-bericht"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Kernel opstart-wachttijd"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Opstarten van CD mogelijk maken?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Opstarten van OF mogelijk maken?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Standaard besturingssysteem?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hier zijn de ingangen voor LILO.\n"
-"U kunt er enkele toevoegen of de bestaande wijzigen."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Toevoegen"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Klaar"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Aanpassen"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Welk type ingang wenst u toe te voegen?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Ander OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Ander OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Ander OS (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Beeld"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Achteraan toevoegen"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lezen/schrijven"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Onveilig"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Naam"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Standaard"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-grootte"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Geen Video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Ingang verwijderen"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Lege naam is niet toegelaten"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "U dient een kernel-beeldbestand aan te geven"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "U dient een root-partitie aan te geven"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Deze naam wordt al gebruikt"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s interfaces gevonden"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Heeft u er nog ��n?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Heeft u een %s interface?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nee"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Bekijk hardware-info"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Bezig met installeren van stuurprogramma voor %s kaart %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Welk %s stuurprogramma moet ik proberen?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"In sommige gevallen heeft het stuurprogramma van %s extra informatie nodig\n"
-"om juist te werken, alhoewel het meestal ook zonder goed werkt. Wil u\n"
-"extra opties invoeren of laat u liever het stuurprogramma zijn informatie\n"
-"zelf zoeken? Soms zal de automatische detectie de computer laten hangen,\n"
-"maar het zou geen schade mogen veroorzaken."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatisch Detecteren"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Geef opties"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"U kunt nu zijn opties doorgeven aan module %s.\n"
-"Merk op dat een adres moet worden ingegeven met de prefix 0x zoals '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"U mag nu de opties voor module %s ingeven.\n"
-"Opties staan in het formaat ``naam=waarde naam2=waarde2 ...''.\n"
-"Bijvoorbeeld, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Module-opties:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Het laden van module %s is niet gelukt.\n"
-"Wenst u opnieuw te proberen met andere parameters?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "toegang tot X-programma's"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "toegang tot rpm-gereedschappen"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "\"su\" toestaan"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "toegang tot administratieve bestanden"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s reeds toegevoegd)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Dit wachtwoord is te eenvoudig"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Gelieve een gebruikersnaam in te geven"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"De gebruikersnaam mag slechts kleine letters, cijfers, `-' en`_' bevatten"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Deze gebruikersnaam werd reeds toegevoegd"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Gebruiker toevoegen"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Geef een gebruiker in\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Gebruiker aanvaarden"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Echte naam"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Gebruikersnaam"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Pictogram"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatisch inloggen"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ik kan uw computer instellen om automatisch bij een bepaalde gebruiker in te "
-"loggen.\n"
-"Wilt u van deze mogelijkheid gebruik maken?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Kies de standaard gebruiker:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Selecteer de 'window manager' die u wilt gebruiken:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Gelieve een taal te kiezen."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "U kunt andere talen kiezen die beschikbaar zullen zijn na installatie"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Alles"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Alle gebruikers toestaan"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Aangepast"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Niet delen"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Pakket %s dient ge�nstalleerd te worden. Wilt u het installeren?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-"U kunt bestandssystemen exporteren met behulp van NFS of Samba. Welke "
-"daarvan wilt u gebruiken?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Verplicht pakket %s is afwezig"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Annuleren"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Userdrake opstarten"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"De 'per gebruiker delen'-functie gebruikt de groep\n"
-"\"fileshare\". U kunt met userdrake een gebruiker\n"
-"aan deze groep toevoegen."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Welkom, krakers!"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Zeer laag"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standaard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Hoog"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Hoger"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Parano�de"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Dit niveau moet met voorzichtigheid gebruikt worden. Het maakt uw systeem\n"
-"makkelijker te gebruiken maar erg gevoelig: het moet niet gebruikt worden "
-"als\n"
-"machine die met andere computers of het internet verbonden is. Er worden\n"
-"geen wachtwoorden gebruikt."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Wachtwoorden zijn nu ingeschakeld, maar het gebruik als genetwerkte computer "
-"is nog steeds niet aanbevolen."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Dit is de standaardbeveiliging, aangeraden voor een computer die als client "
-"met het Internet verbonden zal worden."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Er zijn al enkele restricties en meer automatische checks worden iedere "
-"nacht gedraaid."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Met dit veiligheidsniveau wordt het mogelijk dit systeem als server te "
-"gebruiken.\n"
-"De beveiliging is nu goed genoeg om de computer als server te gebruiken die\n"
-"verbindingen van vele clients accepteert. Merk op: als uw computer alleen "
-"een\n"
-"client op het Internet is, dan kunt u beter een lager niveau kiezen."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Gebaseerd op het vorige niveau, maar nu is het systeem volledig afgesloten.\n"
-"Beveiligingsfuncties staan op hun maximumwaarde."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Kies een veiligheids-niveau"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Veiligheids-niveau"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Gebruik libsafe voor servers"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Een bibliotheek welke bescherming biedt tegen \"buffer-overflow\"- en "
-"\"format string\"-aanvallen."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welkom bij %s - Kies uw besturingssysteem!\n"
-"\n"
-"Kies een ingang uit de bovenstaande lijst\n"
-"of wacht %d seconden voor de standaard-opstartkeuze.\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welkom bij GRUB - Kies uw besturingssysteem!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Gebruik de %c en %c-toetsen om te aangeduide ingang te selecteren."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Druk Enter om het geselecteerde besturingssysteem te booten, druk 'e'"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr " om de ingang eerst te bewerken, of 'c' voor een command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-"De aangeduide ingang zal automatisch gestart worden binnen %d seconden."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "niet genoeg ruimte in /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "U kunt de opstart-lader niet installeren op een %s-partitie\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "Helaas geen hulp beschikbaar.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuratie van opstart-stijl"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Bestand:"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Bestand/_Be�indig"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Nieuwe stijl (in categorie�n)"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Nieuwe stijl"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Traditionele stijl"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Traditionele stijl (Gtk+)"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Aurora gebruiken bij opstarten"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grub modus"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modus"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"U gebruikt op dit moment %s als Opstart-manager.\n"
-"Klik op Configureer om de instel-'wizard' te starten."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configureren"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Systeemvorm"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Open het X-Window systeem bij opstarten"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nee, ik wil niet automatisch inloggen"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, ik wil automatisch inloggen met deze (gebruiker, werkomgeving)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kan /etc/inittab niet openen: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuten"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuut"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d seconden"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Kan geen schermafdruk maken voor het partitioneren"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Schermafdrukken zullen beschikbaar zijn na installatie in %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Frankrijk"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgi�"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Tsjechische Republiek"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Duitsland"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Griekenland"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Noorwegen"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Zweden"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Nederland"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Itali�"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Oostenrijk"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Verenigde Staten"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Gelieve eerst een veiligheidskopie van uw gegevens te maken"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lees aandachtig!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Als u aboot wenst te gebruiken, wees dan voorzichtig en laat vrije ruimte "
-"(2048 sectoren is genoeg)\n"
-"aan het begin van de schijf"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Fout"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Wizard"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Kies een actie"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"U heeft ��n grote FAT-partitie\n"
-"(meestal gebruikt door Microsoft DOS/Windows).\n"
-"Ik stel voor dat u eerst de grootte van die partitie aanpast\n"
-"(klik erop, en klik daarna op \"Grootte Aanpassen\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Gelieve op een nieuwe partitie te klikken"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Details"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Virtueel geheugen"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Leeg"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Ander type"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Bestandssysteem types:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Cre�er"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Type"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Gebruik ``%s'' in de plaats"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Verwijderen"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Gebruik eerst ``Ontkoppelen''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Na het veranderen van het type van partitie %s, zullen alle gegevens op deze "
-"partitie verloren gaan"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Kies een partitie"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Kies een andere partitie"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Afsluiten"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Schakel naar expert-modus"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Schakel naar normale modus"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Ongedaan maken"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Toch doorgaan?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Be�indig zonder opslaan"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Be�indigen zonder de partitietabel weg te schrijven?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Wilt u de /etc/fstab aanpassingen bewaren"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automatisch toewijzen"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Alles wissen"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informatie over harde schijf"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Alle primaire partities zijn al toegewezen"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ik kan geen partitie meer toevoegen"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Om meer partities te kunnen maken, zal u er een moeten verwijderen. Dan kan\n"
-"er een uitgebreide (extended) partitie worden bijgemaakt"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Partitietabel schrijven"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Partitietabel terughalen"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Partitietabel redden"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Partitietabel opnieuw laden"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automatische koppeling van verwisselbare media"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Selecteer bestand"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"De backup partitietabel heeft niet dezelfde grootte\n"
-"Toch verdergaan?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Waarschuwing"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Plaats een floppy in het station.\n"
-"Alle gegevens op deze floppy zullen verloren gaan"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Proberen om partitietabel te redden"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Gedetailleerde informatie"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Koppelpunt"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opties"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Grootte aanpassen"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Verplaatsen"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatteren"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Koppelen"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Toevoegen aan RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Toevoegen aan LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Ontkoppelen"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Verwijderen uit RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Verwijderen uit LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAID aanpassen"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Voor Loopback gebruiken"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Nieuwe partitie cre�ren"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Start-sector: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Grootte in MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Bestandssysteem-type: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Koppelpunt: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Voorkeur: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Het loopback-bestand verwijderen?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Verander partitietype"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Welk bestandssysteem wenst u?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Bezig met omschakelen van ext2 naar ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Waar wenst u dit loopback-apparaat %s aan te koppelen?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Waaraan wenst u dit apparaat %s te koppelen?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan een koppelpunt niet verzetten omdat deze partitie gebruikt wordt als\n"
-"loopback. Verwijder de loopback eerst."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Bezig met berekenen van FAT bestandssysteemgrenzen"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Bezig met de grootte aan te passen"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Deze partitie is niet in grootte aanpasbaar"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"Er zou een reservekopie moeten gemaakt worden van alle gegevens op deze "
-"partitie."
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Na het veranderen van de grootte van partitie %s, zullen alle gegevens op "
-"deze partitie verloren gaan"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Kies de nieuwe grootte"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nieuwe grootte in MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Naar welke schijf wenst u het te verplaatsen?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Naar welke sector wenst u het te verplaatsen?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Aan het verplaatsen"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Partitie aan het verplaatsen..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Kies een bestaande RAID om aan toe te voegen"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nieuw"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Kies een bestaande LVM om aan toe te voegen"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Naam van LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Deze partitie kan niet gebruikt worden voor loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback-bestandsnaam: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Voer een bestandsnaam in"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Loopback-bestand is al in gebruik, gelieve een ander te kiezen"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Het bestand bestaat al. Wenst u het te gebruiken?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Koppel-opties:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Diversen"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "apparaat"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "niveau"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "chunk-grootte"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Voorzichtig: deze operatie is gevaarlijk."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Welk type partitionering?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Sorry, het is zinloos om /boot zo ver achteraan de schijf te plaatsen (op "
-"een\n"
-"cylinder > 1024).\n"
-"Ofwel gebruikt u LILO en zal het niet werken, of u gebruikt LILO niet en u "
-"heeft\n"
-"/boot niet nodig."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"De partitie die u selecteerde als rootpartitie (/) bevindt zich fysiek "
-"voorbij\n"
-"de 1024e cylinder van de harde schijf en u heeft geen /boot partitie.\n"
-"Indien u de LILO boot manager wenst te gebruiken, zorg er dan voor dat u "
-"een\n"
-"/boot partitie toevoegt aan het begin van de schijf"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"U heeft een software RAID partitie als root (/) geselecteerd.\n"
-"Geen bootloader kan dit aan zonder een /boot partitie, dus wees er zeker\n"
-"van ook een /boot-partitie toe te voegen."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partitietabel van schijf %s wordt weggeschreven!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "U zal moeten herstarten voordat de aanpassing van kracht wordt"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Na het formatteren van partitie %s, zullen alle gegevens op deze partitie "
-"verloren zijn"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Bezig met formatteren"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Bezig met formatteren van loopback-bestand %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Bezig met formatteren van partitie %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Bestanden verbergen"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Bestanden naar de nieuwe partitie verplaatsen"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Map %s bevat reeds gegevens\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Bezig met verplaatsen van bestanden naar de nieuwe partitie"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Bezig met kopi�ren van %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Bezig met verwijderen van %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partitie %s heet vanaf nu %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Apparaat: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS schijfletter: %s (dit is slechts een gok)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Type: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Naam: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Grootte: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectoren"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylinder %d tot %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Geformatteerd\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Niet geformatteerd\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Gekoppeld\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback-bestand(en):   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Standaard te starten partitie\n"
-"    (om MS-DOS te booten, niet voor lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Niveau %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Chunk-grootte %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-schijven %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback bestandsnaam: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"De kans is aanwezig dat deze\n"
-"partitie een Driver partitie is, u\n"
-"kunt hem waarschijnlijk beter met\n"
-"rust laten.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Deze speciale Bootstrap\n"
-"partitie is voor het\n"
-"duaal-opstarten van uw systeem.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Grootte: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Indeling: %s cylinders, %s koppen, %s sectoren\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-schijven %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitietabel-type: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "op bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opties: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Sleutel voor bestandssysteemencryption"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Kies uw sleutel voor bestandssysteemencryption"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Deze encryption-sleutel is te makkelijk (moet tenminste %d tekens lang zijn)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "De encryption-sleutels kloppen niet met elkaar"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Encryptionsleutel"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Encryptionsleutel (nogmaals)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Verander partitietype"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Gelieve op een media-soort te klikken"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Servers zoeken"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatteren van %s mislukt"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ik weet niet hoe %s in type %s te formatteren"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "het koppelen van partitie %s in map %s is mislukt"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck is mislukt met afsluitcode %d of signaal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fout bij ontkoppelen %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "eenvoudig"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "met /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "U kan JFS niet gebruiken op een partitie kleiner dan 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "U kan ReiserFS niet gebruiken op een partitie kleiner dan 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Koppelpunten moeten beginnen met een /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Er is al een partitie met als koppelpunt %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "U kunt geen LVM logisch deel voor koppelpunt %s gebruiken"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Deze map zou binnen het root bestandssysteem moeten blijven"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"U benodigt een geavanceerd bestandssysteem (ext2, reiserfs) voor dit "
-"koppelpunt\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "U kunt geen versleuteld bestandssysteem voor koppelpunt %s gebruiken"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Niet voldoende vrije ruimte voor automatische toewijzing"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Niets meer te doen"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fout bij het openen van %s voor schrijfbewerking: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Er is een fout opgetreden - er werden geen geldige apparaten gevonden "
-"waarop\n"
-"nieuwe bestandssystemen konden worden gecre�erd. Gelieve uw hardware na te\n"
-"kijken voor de oorzaak van dit probleem."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "U heeft helemaal geen partities!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux is een multi-gebruikerssysteem, dit betekent dat iedere "
-"gebruiker \n"
-"haar eigen voorkeuren, bestanden enzovoort kan hebben. U kunt de \n"
-"''Gebruikershandleiding'' lezen om hierover meer te weten te komen. Maar \n"
-"in tegenstelling tot \"root\", de \"administrator\", zullen de gebruikers "
-"die\n"
-" u hier toevoegt geen recht hebben om iets te veranderen behalve hun eigen \n"
-"bestanden en hun eigen configuratie. U zult tenminste ��n gebruiker voor \n"
-"uzelf aan moeten maken. Deze account is degene waar u voor dagelijks "
-"gebruik \n"
-"op zult inloggen. Alhoewel het erg praktisch is om iedere dag als \"root\" \n"
-"in te loggen, kan het ook erg gevaarlijk zijn! De kleinste vergissing kan \n"
-"ervoor zorgen dat uw hele systeem niet meer werkt. Wanneer u een \n"
-"grote vergissing maakt als een reguliere gebruiker, zou u sommige gegevens \n"
-"kunnen verliezen, maar niet het hele systeem.\n"
-"\n"
-"Eerst voert u uw echte naam in. Dit is uiteraard niet verplicht - u kunt \n"
-"alles invoeren wat u wilt. DrakX neemt dan het eerste woord dat u in het "
-"veld \n"
-"hebt ingevuld en brengt het over naar het veld \"Gebruikersnaam\". Dit is "
-"de \n"
-"naam die deze afzonderlijke gebruiker krijgt om in te loggen op het "
-"systeem. \n"
-"U kunt het veranderen. Dan zal u hier een wachtwoord moeten invoeren. Het \n"
-"wachtwoord van een (reguliere) gebruiker zonder privileges is niet zo \n"
-"cruciaal als dat van de \"root\"-gebruiker vanuit veiligheidsperspectief, \n"
-"maar dat is geen reden om het te verwaarlozen- tenslotte staan uw "
-"bestanden \n"
-"op het spel.\n"
-"\n"
-"Wanneer u klikt op \"Gebruiker aaanvaarden\", dan kunt u daarna zoveel \n"
-"gebruikers toevoegen als u wilt. Voeg een gebruiker toe voor elk van uw \n"
-"vrienden, uw vader of uw zus bijvoorbeeld. Als u klaar bent met het \n"
-"toevoegen van alle gebruikers die u wenst, selecteer dan \"Klaar\".\n"
-"\n"
-"Klikken op de \"Geavanceerd\"-knop stelt u in staat om de standaard \"shell"
-"\"\n"
-"voor een gebruiker te veranderen (standaard is dit bash)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Hierboven zijn de bestaande Linux partities afgebeeld die op uw harde\n"
-"schijf gevonden zijn. U kunt de keuzes die gemaakt zijn door de wizard\n"
-"behouden, ze zijn goed voor de meeste doorsnee installaties.\n"
-"Indien u veranderingen maakt, moet u in ieder geval een root partitie\n"
-"(\"/\") defini�ren. Kies een partitie niet te klein, anders zult u niet in\n"
-"staat zijn genoeg software te installeren. Indien u uw  gegevens op een\n"
-"aparte partitie wilt bewaren, dient u tevens een \"/home\" partitie te\n"
-"cre�ren (alleen mogelijk wanneer er meer dan ��n Linux partitie\n"
-"beschikbaar is).\n"
-"\n"
-"Elke partitie is als volgt afgebeeld: \"Naam\", \"Capaciteit\"\n"
-"\n"
-"\"Naam\" is als volgt opgebouwd: \"type harde schijf\", \"harde schijf-nummer"
-"\",\n"
-"\"partitienumer\" (bijvoorbeeld \"hda1\").\n"
-"\n"
-"\"Type harde schijf\" is \"hd\" als uw harde schijf van het IDE-type is en"
-"\"sd\" wanneer deze van het SCSI type is.\n"
-"\n"
-"\"Harde schijf-nummer\" is altijd een letter na \"hd\" of \"sd\". Voor IDE\n"
-"harde schijven:\n"
-"\n"
-" * \"a\" betekent \"master harde schijf op de primaire IDE controller\",\n"
-"\n"
-" * \"b\" betekent \"slave harde schijf op de primaire IDE controller\",\n"
-"\n"
-" * \"c\" betekent \"master harde schijf op de secundaire IDE controller\",\n"
-"\n"
-" * \"d\" betekent \"slave harde schijf op de secundaire IDE controller\".\n"
-"\n"
-"In het geval van SCSI harde schijven betekent een \"a\" \"laagste SCSI ID"
-"\",\n"
-"een \"b\" \"het op ��n na laagste SCSI ID\", etc."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"De Mandrake Linux installatie is verdeeld over meerdere CDROMs. DrakX \n"
-"weet of een geselecteerd pakket te vinden is op een andere CDROM en zal\n"
-"de huidige CD uitwerpen en u vragen om een andere in te leggen wanneer\n"
-"dat nodig is."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Het is nu tijd om te bepalen welke programma's u op uw systeem\n"
-"wenst te installeren. Er zijn duizenden pakketten beschikbaar voor Mandrake\n"
-"Linux, en er wordt niet van u verwacht dat u ze allemaal uit uw hoofd kent.\n"
-"\n"
-"Indien u een standaard-installatie vanaf CD-ROM uitvoert, zal u eerst\n"
-"gevraagd worden de CD's die u bij de hand heeft te specificeren (alleen\n"
-"in Expert-modus). Ga de CD-etiketten na en selecteer de vakjes die\n"
-"corresponderen met de CD's die u heeft voor de installatie. Klik op \"OK\"\n"
-"zodra u gereed bent om verder te gaan.\n"
-"\n"
-"Pakketten zijn samengebracht in groepen die corresponderen met een\n"
-"bepaald gebruik van uw computer. De groepen zelf zijn ingedeeld in vier\n"
-"categorie�n:\n"
-"\n"
-"* \"Werkstation\": indien u van plan bent uw computer als werkstation te\n"
-"gaan gebruiken, selecteer dan ��n of meer van de corresponderende\n"
-"groepen. \n"
-"\n"
-"* \"Ontwikkeling\": als de computer gebruikt gaat worden voor programmeren,\n"
-"kiest u de gewenste groep(en).\n"
-"\n"
-"* \"Server\": als de computer bestemd is voor server-doeleinden, dan\n"
-"kunt u aangeven welke van de meest algemene diensten u op uw\n"
-"computer ge�nstalleerd wilt zien.\n"
-"\n"
-"* \"Grafische Omgeving\": tot slot is dit waar u uw voorkeur voor een "
-"grafische\n"
-"omgeving kunt aangeven. Tenminste ��n moet geselecteerd zijn als u een\n"
-"grafisch werkstation wilt hebben!\n"
-"\n"
-"Bij het bewegen van de muispijl boven een groepnaam zal er een korte "
-"verklarende\n"
-"tekst over die groep getoond worden. Als u alle groepen deselecteert tijdens "
-"het\n"
-"uitvoeren van een reguliere installatie (in tegenstelling tot een "
-"opwaardering), dan\n"
-"zal een dialoogvenster verschijnen dat verscheidene opties voor een "
-"minimale\n"
-"installatie voorstelt:\n"
-" * \"Met X\" Installeer zo min mogelijk pakketten met behoud van een "
-"grafische\n"
-"werkomgeving;\n"
-" \n"
-" * \"Met basis-documentatie\" installeert het basissysteem plus algemene\n"
-"hulpprogramma's en hun documentatie. Deze installatie is geschikt om een "
-"server\n"
-"mee in te richten.\n"
-"\n"
-" * \"Werkelijk minimale installatie\" zal het absolute minimum installeren "
-"dat nodig\n"
-"is om een werkend Linux-systeem te verkrijgen, slechts met een "
-"commandoregel.\n"
-"Deze installatie is ongeveer 65MB groot.\n"
-"\n"
-"U kunt het \"Individuele pakketselectie\"-vakje selecteren, welke nuttig is "
-"als\n"
-"u bekend bent met de aangeboden pakketten of indien u totale controle wenst\n"
-"over wat er ge�nstalleerd zal worden.\n"
-"\n"
-"In het geval dat u de installatie in \"Opwaarderen\"-modus heeft gestart, "
-"kunt u\n"
-"alle groepen deselecteren om te voorkomen dat er nieuwe pakketten "
-"ge�nstalleerd\n"
-"worden. Dit is nuttig bij het repareren of het vernieuwen van een bestaand "
-"systeem."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Tenslotte, afhankelijk van uw keus om al dan niet individuele pakketten\n"
-"te selecteren, wordt u een boom getoond bevattende alle pakketten\n"
-"geclassificeerd in groepen en subgroepen. Terwijl u door de boom bladert,\n"
-"kunt u gehele groepen, subgroepen of individuele pakketten selecteren.\n"
-"\n"
-"Wanneer u een pakket in de boom selecteert, verschijnt een beschrijving\n"
-"aan de rechterkant. Zodra uw selectie klaar is, klikt u de \"Installeren\"-\n"
-"knop welke het installatieproces in gang zal zetten. Afhankelijk van de\n"
-"snelheid van uw apparatuur en het aantal pakketten dat ge�nstalleerd\n"
-"moet worden, kan het enige tijd duren om het proces te voltooien. Een\n"
-"geschatte tijd tot voltooiing wordt weergegeven op het scherm om u te\n"
-"helpen inschatten of er nog tijd is om te genieten van een kopje koffie.\n"
-"\n"
-"!! Als een server-pakket geselecteerd is, ofwel bedoeld ofwel omdat\n"
-"het onderdeel is van een gehele groep, zal u gevraagd worden om\n"
-"te bevestigen dat u deze servers echt wilt installeren. Onder Mandrake\n"
-"Linux worden alle ge�nstalleerde servers standaard ingeschakeld\n"
-"tijdens het opstarten. Zelfs wanneer zij veilig zijn en geen bekende\n"
-"beveiligingsgebreken hadden op het moment dat de distributie "
-"werdnuitgebracht, kan het gebeuren dat beveiligingsfouten ontdekt worden\n"
-"nadat deze versie van Mandrake Linux afgemaakt werd. Indien u niet\n"
-"weet wat een bepaalde dienst geacht wordt te doen of waarom het\n"
-"ge�nstalleerd wordt, klikt u dan \"Nee\". Klikken op \"Ja\" zorgt ervoor\n"
-"dat de getoonde diensten ge�nstalleerd worden en dat ze automatisch\n"
-"ingeschakeld zullen worden. !!\n"
-"\n"
-"De \"Automatische afhankelijkheden\"-optie schakelt eenvoudigweg het\n"
-"waarschuwingsvenster uit dat verschijnt wanneer het installatieprogramma\n"
-"automatisch een pakket selecteert. Dit gebeurt omdat het vastgesteld heeft\n"
-"dat het een afhankelijkheid moet vervullen met een ander pakket om de\n"
-"installatie succesvol te kunnen voltooien.\n"
-"\n"
-"Het minuscule diskette-pictogram onderaan de lijst stelt u in staat de\n"
-"pakketten-lijst te laden die tijdens een eerdere installatie gekozen was.\n"
-"Als u klikt op dit pictogram zal u gevraagd worden een diskette in het\n"
-"diskettestation te plaatsen welke gecre�erd was aan het eind van een\n"
-"andere installatie. Zie de tweede tip van de laatste stap over hoe u een\n"
-"dergelijke diskette aanmaakt."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Het is nu mogelijk om uw internet- of netwerkverbinding in te stellen.\n"
-"Indien u wenst uw computer aan het Internet of aan een lokaal netwerk te\n"
-"verbinden, klik dan op \"OK\". De automatische bespeuring van netwerk-\n"
-"apparaten en modem zal worden opgestart. Als deze bespeuring mislukt,\n"
-"deselecteer dan het \"Automatische bespeuring gebruiken\"-vakje de\n"
-"volgende keer. U kunt ook besluiten het netwerk niet te configureren of\n"
-"het later pas te doen; in dat geval klikt u op de \"Annuleren\"-knop.\n"
-"Beschikbare verbindingstypen zijn:\n"
-"conventionele modem, ISDN-adapter, ADSL-verbinding, kabelmodem en\n"
-"tenslotte een eenvoudige LAN-verbinding (Ethernet).\n"
-"\n"
-"Wij zullen hier niet tot in detail ingaan op elke configuratie. Zorgt u er\n"
-"gewoon voor dat u alle instellingen van uw Internetprovider of\n"
-"systeembeheerder bij de hand heeft.\n"
-"\n"
-"U kunt het hoofdstuk over Internetverbindingen in het handboek\n"
-"raadplegen voor details over de configuratie, of gewoon wachten\n"
-"totdat uw systeem ge�nstalleerd is en dan het beschreven programma\n"
-"gebruiken om uw verbinding te configureren.\n"
-"\n"
-"Indien u wenst het netwerk later na de installatie te configureren of\n"
-"indien u klaar bent met het configureren van uw verbinding, klikt u\n"
-"op \"Annuleren\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"U kunt nu kiezen welke diensten u wil gestart hebben bij het opstarten.\n"
-"\n"
-"In dit overzicht staan alle diensten die beschikbaar zijn in de huidige\n"
-"installatie. Kijk ze aandachtig na en de-selecteer degenen die niet altijd\n"
-"nodig zijn bij het opstarten.\n"
-"\n"
-"U kunt een korte uitleg krijgen over een dienst door een specifieke dienst\n"
-"te selecteren. Wanneer u niet zeker bent of een dienst nuttig is of niet,\n"
-"dan is het veiliger om de standaard-instelling over te nemen.\n"
-"\n"
-"Wees vooral voorzichtig in deze stap als u uw machine als een server wil\n"
-"gebruiken: u zal waarschijnlijk de diensten die u niet nodig heeft niet "
-"willen\n"
-"starten. Onthoud alstublieft dat een aantal diensten gevaarlijk kunnen zijn\n"
-"wanneer ze geactiveerd zijn op een server. In het algemeen geldt: kies\n"
-"alleen de services die u echt nodig heeft."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux houdt de tijd bij in GMT (Greenwich Mean Time) en vertaalt\n"
-"het naar lokale tijd volgens de tijdzone die u geselecteerd heeft. Het is\n"
-"echter mogelijk om dit te deactiveren door \"Hardware klok ingesteld op\n"
-"GMT\" te deselecteren zodat de hardware-klok dezelfde is als de systeem-\n"
-"klok. Dit is nuttig wanneer er op de computer nog een ander besturings-\n"
-"systeem staat zoals Windows.\n"
-"\n"
-"De \"Automatische tijdssynchronisatie\"-optie zal de klok automatisch\n"
-"bijstellen door verbinding te maken met een tijdsserver op internet. In\n"
-"de getoonde lijst kunt u een server kiezen bij u in de buurt. Uiteraard\n"
-"moet u een werkende internetverbinding hebben voordat deze functie\n"
-"werkt. Dit zorgt er tevens voor dat er een tijdsserver op uw computer\n"
-"wordt ge�nstalleerd die mogelijkerwijs gebruikt kan worden door\n"
-"andere computers op uw lokale netwerk."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (voor X Window System) is het hart van de GNU/Linux grafische interface\n"
-"waarvan alle grafische omgevingen (KDE, GNOME, AfterStep, WindowMaker...)\n"
-"afhankelijk zijn die met Mandrake Linux zijn meegeleverd. In deze stap zal "
-"DrakX\n"
-"trachten X automatisch te configureren.\n"
-"\n"
-"Het is uiterst ongebruikelijk dat dit mislukt, tenzij de hardware erg oud "
-"(of\n"
-"erg nieuw) is. Als het slaagt, zal X automatisch gestart worden in het "
-"beste\n"
-"oplossend vermogen mogelijk, afhankelijk van de grootte van uw monitor.\n"
-"Een venster zal verschijnen en u vragen of u het kunt zien.\n"
-"\n"
-"Indien u een \"Expert\"-installatie uitvoert, komt u in de X configuratie "
-"wizard.\n"
-"Zie het corresponderende stuk in de handleiding voor meer informatie over\n"
-"deze wizard.\n"
-"\n"
-"Als u het bericht tijdens de test kunt zien en \"Ja\" antwoordt, zal DrakX\n"
-"doorgaan naar de volgende stap. Zoniet, dan betekent dat gewoon dat de\n"
-"configuratie onjuist was. De test zal in dat geval automatisch eindigen na\n"
-"10 seconden en het scherm herstellen."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"De eerste keer dat u de X configuratie probeert, zult u misschien niet\n"
-"erg tevreden zijn met het beeld (scherm te klein, naar links of naar rechts\n"
-"verschoven...). Daarom zal DrakX u vragen of de configuratie u bevalt,\n"
-"zelfs als X correct opstart. Het zal u tevens voorstellen om de "
-"configuratie\n"
-"te wijzigen door een lijst van geldige modi te tonen die het gevonden "
-"heeft,\n"
-"en u vragen er ��n te selecteren.\n"
-"\n"
-"Als een uiterste uitwijkmogelijkheid, als het u niet lukt X aan de praat te\n"
-"krijgen, kiest u \"Grafische kaart wijzigen\", selecteer \"Niet vermelde "
-"kaart\",en wanneer u gevraagd wordt welke server u wenst, kiest u \"FBDev\". "
-"Dit\n"
-"is een veilige optie die met iedere moderne grafische kaart werkt. Kiest u\n"
-"vervolgens \"Opnieuw testen\" om u ervan te vergewissen dat het werkt."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Tenslotte zal u gevraagd wordne of u de grafische interface wilt zien\n"
-"bij het opstarten. Merk op dat deze vraag ook gesteld wordt zelfs als\n"
-"u niet ervoor gekozen hebt om de configuratie te testen. Vanzelfsprekend\n"
-"wilt u \"Nee\" antwoorden als uw machine als server moet dienen, of\n"
-"indien u er niet in slaagde het beeld te configureren."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"De Mandrake Linux CD-ROM heeft een ingebouwde reddings-modus. U kunt\n"
-"er bij komen door op te starten van de CD-ROM, de \"F1\"-toets in te "
-"drukken\n"
-"tijdens het opstarten en \"rescue\" in te typen bij de aanwijzing. Maar in "
-"het\n"
-"geval dat uw computer niet kan opstarten van de CD-ROM, moet u terugkomen\n"
-"naar deze stap voor hulp in tenminste twee situaties:\n"
-"\n"
-" * wanneer de opstart-lader ge�nstalleerd wordt, zal DrakX de boot sector "
-"(MBR)\n"
-"van uw eerste harde schijf overschrijven (tenzij u een andere "
-"opstartbeheerder\n"
-"gebruikt) zodat u op kunt starten met ofwel Windows ofwel GNU/Linux (ervan\n"
-"uitgaand dat u Windows op uw systeem heeft). Indien u Windows opnieuw\n"
-"moet installeren, zal het Microsoft installatieproces de boot sector "
-"herschrijven,\n"
-"en u zult dan niet meer in staat zijn GNU/Linux op te starten!\n"
-"\n"
-" * indien een probleem zich voordoet waardoor u GNU/Linux niet van de harde\n"
-"schijf kunt opstarten, zal deze diskette de enige manier zijn om GNU/Linux\n"
-"op te starten. Hij bevat een behoorlijk aantal systeemgereedschappen om\n"
-"uw systeem in oude staat te herstellen wanneer het gecrashed is door een\n"
-"stroomonderbreking, een ongelukkige typfout, een vergissing in een\n"
-"wachtwoord, of wat voor reden dan ook.\n"
-"\n"
-"Wanneer u op deze stap klikt, wordt u gevraagd een diskette te plaatsen in\n"
-"het diskettestation. De diskette moet leeg zijn of geen gegevens bevatten "
-"die\n"
-"u nog nodig heeft. Het is niet nodig om hem te formatteren omdat DrakX de\n"
-"gehele diskette zal herschrijven."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Op dit punt moet u kiezen waar op uw harde schijf u uw Mandrake Linux\n"
-"besturingssysteem wilt installeren. Als uw harde schijf leeg is of als een\n"
-"ander besturingssysteem alle beschikbare ruimte inneemt, dan zult u\n"
-"de harde schijf moeten partitioneren. Partitioneren houdt in dat u uw harde\n"
-"schijf in logische stukken onderverdeelt om ruimte te cre�ren voor uw "
-"nieuwe\n"
-"Mandrake Linux besturingssysteem.\n"
-"\n"
-"Omdat de effecten van het partitioneringsproces over het algemeen niet\n"
-"terug te draaien zijn, kan partitioneren intimiderend en spannend zijn voor\n"
-"een onervaren gebruiker. Gelukkig is er een wizard die dit proces\n"
-"vereenvoudigt. Raadpleeg de handleiding voordat u begint en neem de\n"
-"tijd.\n"
-"\n"
-"Indien u de installatie in expert-modus draait, komt u terecht in "
-"DiskDrake,\n"
-"het partitioneringsprogramma van Mandrake Linux, dat u in staat stelt\n"
-"om uw partities precies af te stellen. Zie het hoofdstuk over DiskDrake\n"
-"in de handleiding. Voor de installatie-interace kunt u de wizards gebruiken\n"
-"die hier beschreven zijn door op de \"Wizard\"-knop van het dialoogvenster\n"
-"te klikken.\n"
-"\n"
-"Indien er reeds partities gedefinieerd zijn, hetzij van een vorige "
-"installatie\n"
-"hetzij door een ander partitioneringsprogramma, dan kunt u deze\n"
-"eenvoudigweg selecteren om uw Linux-systeem op te installeren.\n"
-"\n"
-"Indien er geen partities gedefinieerd zijn, zult u ze moeten aanmaken met\n"
-"de wizard. Afhankelijk van de configuratie van uw harde schijf, zijn er\n"
-"verscheidene opties beschikbaar:\n"
-"\n"
-" * \"Gebruik vrije ruimte\": deze optie zal leiden tot het automatisch\n"
-"partitioneren van uw lege schijf/schijven. Er worden u verder geen vragen\n"
-"gesteld.\n"
-"\n"
-" * \"Gebruik bestaande partitie\": de wizard heeft ��n of meer bestaande\n"
-"Linux-partities op uw harde schijf gevonden. Indien u deze wilt gebruiken,\n"
-"kiest u deze optie.\n"
-"\n"
-" * \"Gebruik vrije ruime op de Windows-partitie\": indien Microsoft Windows\n"
-"op uw harde schijf is ge�nstalleerd en alle beschikbare ruimte in beslag "
-"neemt,\n"
-"dient u vrije ruimte te cre�ren voor Linux-gegevens. Om dat te doen, kunt u "
-"uw\n"
-"Microsoft Windows-partitie en -gegevens wissen (zie \"Wis gehele schijf\"\n"
-"of \"Expert-modus\"-oplossingen) om uw Microsoft Windows-partitie te\n"
-"verkleinen. Het aanpassen van de grootte kan bewerkstelligd worden zonder\n"
-"verlies van enige gegevens. Deze oplossing is aanbevolen indien u zowel\n"
-"Mandrake Linux en Microsoft Windows op dezelfde computer wilt gebruiken.\n"
-"\n"
-"    Laat het goed tot u doordringen, voordat u deze optie kiest, dat uw\n"
-"Microsoft Windows partitie na afloop van deze procedure minder groot\n"
-"zal zijn dan hij nu is. U zult minder vrije ruimte hebben onder\n"
-"Microsoft Windows om uw gegevens op te slaan of om nieuwe software te\n"
-"installeren.\n"
-"\n"
-" * \"Gehele schijf wissen\": indien u alle gegevens en alle partities op uw\n"
-"harde schijf wilt verwijderen en vervangen door uw nieuwe Mandrake Linux-\n"
-"systeem, kiest u deze optie. Weest u voorzichtig met deze oplossing omdat u\n"
-"na bevestiging deze keuze niet meer ongedaan kunt maken.\n"
-"\n"
-"    !! Als u deze optie kiest, zullen alle gegevens op uw schijf verloren "
-"gaan. !!\n"
-"\n"
-" * \"Verwijder Windows\": dit wist simpelweg alles op de schijf en begint "
-"van\n"
-"voren af aan met partitioneren. Alle gegevens op uw schijf zullen verloren\n"
-"gaan.\n"
-"\n"
-"   !! Als u deze optie kiest, zullen alle gegevens op uw schijf verloren "
-"gaan. !!\n"
-"\n"
-" * \"Expert-modus\": kies deze optie indien u handmatig uw harde schijf "
-"wenst\n"
-"te partitioneren. Weest u voorzichtig - het is een krachtige maar riskante "
-"keuze.\n"
-"U kunt erg gemakkelijk al uw gegevens kwijtraken. Kiest u derhalve niet "
-"hiervoor\n"
-"tenzij u weet wat u doet."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Alstublieft. De installatieprocedure is voltooid en uw GNU/Linux-systeem\n"
-"is klaar voor gebruik. Klik gewoon op \"OK\" om uw computer opnieuw te\n"
-"starten. Indien u een meervoudig opstartsysteem gebruikt, kunt u GNU/Linux\n"
-"of Windows opstarten, welke u prefereert, zodra de computer de\n"
-"zelftestprocedure heeft doorlopen.\n"
-"\n"
-"De \"Geavanceerd\"-knop (alleen in Expert-modus) toont twee knoppen meer\n"
-"voor:\n"
-"\n"
-" * \"auto-installatiediskette aanmaken\": om een installatiediskette te\n"
-"cre�ren weke de gehele installatie automatisch zal uitvoeren zonder hulp\n"
-"van een beheerder, gelijkend op de installatie die u zonet heeft\n"
-"geconfigureerd.\n"
-"\n"
-"Merk op dat er twee verschillende opties zijn na het klikken van deze knop:\n"
-"\n"
-"    * \"Afspelen\". Dit is een gedeeltelijk geautomatiseerde installatie, "
-"omdat\n"
-"de partitioneringsstap (alleen deze) interactief blijft.\n"
-"\n"
-"    * \"Geautomatiseerd\". Volledig geautomatiseerde installatie: de harde\n"
-"schijf wordt volledig overschreven en alle gegevens erop raken verloren.\n"
-"\n"
-"    Deze mogelijkheid is erg handig wanneer u een grote hoeveelheid\n"
-"soortgelijke computers installeert. Zie ook de Auto-installatie afdeling op\n"
-"onze website.\n"
-"\n"
-" * \"Pakketselectie opslaan\"(*) : slaat de pakketselectie op zoals u hem\n"
-"eerder heeft gemaakt. Vervolgens, wanneer u een andere installatie\n"
-"uitvoert, plaatst u de diskette in het diskettestation en draait u het\n"
-"installatieprogramma waarna u naar het helpscherm gaat door op de\n"
-"[F1]-toets te drukken, en door ''linux defcfg=\"floppy\" '' in te geven.\n"
-"\n"
-"(*) U heeft een FAT-geformatteerde dskette nodig (om er ��n onder\n"
-"GNU/Linux te cre�ren, typt u \"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Iedere nieuw gedefinieerde partitie moet geformatteerd worden voor\n"
-"gebruik (formatteren betekent het cre�ren van een bestandssysteem).\n"
-"\n"
-"Op dit moment wilt u wellicht enkele reeds bestaande partities\n"
-"herformatteren om alle gegevens erop te wissen. Indien u dat wenst\n"
-"te doen, selecteert u dan ook deze partities.\n"
-"\n"
-"Merk op dat het niet nodig is om alle reeds bestaande partities te\n"
-"herformatteren. U dient de partities waar het besturingssysteem op\n"
-"staat te herformatteren (zoals \"/\", \"/usr\" of \"/var\") maar u hoeft\n"
-"geen partities te herformatteren die gegevens bevatten die u wenst\n"
-"te bewaren (gewoonlijk \"/home\").\n"
-"\n"
-"Weest u alstublieft voorzichtig met het selecteren van partities. Na het\n"
-"formatteren zullen alle gegevens op de geselecteerde partities definitief\n"
-"verwijderd zijn.\n"
-"\n"
-"Klik op \"OK\" wanneer u klaar bent om de partities te formatteren.\n"
-"\n"
-"Klik op \"Annuleren\" indien u een andere partitie voor uw nieuwe\n"
-"Mandrake Linux besturingssysteem wilt kiezen.\n"
-"\n"
-"Klik op \"Geavanceerd\" indien u partities wenst te selcteren die op\n"
-"onleesbare blokken gecontroleerd zullen worden."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Uw nieuwe Mandrake Linux besturingssysteem wordt nu ge�nstalleerd.\n"
-"Afhankelijk van het aantal pakketten dat u zult installeren en de snelheid\n"
-"van uw computer, kan deze operatie enkele minuten tot een behoorlijk lange\n"
-"tijd in beslag nemen.\n"
-"\n"
-"Even geduld alstublieft."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Op het moment dat u Mandrake Linux installeert, is het waarschijnlijk\n"
-"dat sommige pakketten vernieuwd zijn sinds het moment dat het werd\n"
-"uitgebracht. Sommige onvolkomenheden kunnen gerepareerd zijn en\n"
-"beveiligingsproblemen opgelost. Om u te kunnen laten profiteren van\n"
-"deze vernieuwingen kunt u ze nu downloaden van het internet.\n"
-"Kies \"Ja\" indien u een werkende internetverbinding heeft, of \"Nee\"\n"
-"als u liever later vernieuwde pakketten installeert.\n"
-"\n"
-"Wanneeru op \"Ja\" klikt verschijnt er een lijst van plaatsen waar\n"
-"vernieuwingen van kunnen worden opgehaald. Kies degene waar\n"
-"u zich het dichtst bij in de buurt bevindt. Daarna verschijnt een\n"
-"pakketselectieboom: ga de selectie na en druk op \"Installeren\"\n"
-"om de geselecteerde pakketten op te halen en te installeren. Druk\n"
-"op \"Annuleren\" om af te breken."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Voordat u verdergaat dient u eerst de voorwaarden in de licentie\n"
-"aandachtig te lezen. Zij beslaan de gehele Mandrake Linux distributie,\n"
-"en indien u niet akkoord gaat met alle voorwaarden erin klikt u op de\n"
-"\"Weigeren\"-knop hetgeen de installatie onmiddelijk zal afbreken. Om\n"
-"verder te gaan met de installatie, klikt u op de \"Accepteren\"-knop."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Op dit punt is het tijd om het beveiligingsniveau te kiezen voor deze\n"
-"computer. Als een vuistregel is aan te houden dat hoe meer blootgesteld\n"
-"de computer is, en hoe meer cruciale gegevens erop opgeslagen zijn,\n"
-"hoe hoger het beveiligingsniveau moet zijn. Echter, een hoger\n"
-"beveiligingsniveau gaat meestal ten koste van gebruiksgemak. U zij\n"
-"verwezen naar het MSEC-hoofdstuk van de \"Reference Manual\" voor\n"
-"meer informatie over de betekenis van deze niveaus.\n"
-"\n"
-"In het geval dat u niet weet wat te kiezen, behoudt u de standaard optie."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Op dit punt moet u kiezen welke partitie(s) gebruikt zullen worden voor\n"
-"de installatie van uw Mandrake Linux systeem. Indien er reeds partities\n"
-"gedefinieerd zijn, van een vorige GNU/Linux installatie of door een\n"
-"ander partitioneringsprogramma, kunt u bestaande partities gebruiken.\n"
-"In andere gevallen moeten er harde schijf-partities gedefinieerd worden.\n"
-"\n"
-"Om partities te cre�ren, dient u eerst een harde schijf te kiezen. U kunt "
-"de\n"
-"te partitioneren schijf selecteren door op \"hda\" te klikken voor de "
-"eerste\n"
-"IDE-schijf, \"hdb\" voor de tweede, \"sda\" voor de eerste SCSI-schijf\n"
-"enzovoort.\n"
-"\n"
-"Om de geselecteerde harde schijf te partitioneren, kunt u deze opties\n"
-"gebruiken:\n"
-"\n"
-" * \"Alles wissen\": deze optie verwijdert alle partities op de "
-"geselecteerde\n"
-"harde schijf.\n"
-"\n"
-" * \"Automatisch toewijzen\": deze optie cre�ert automatisch Ext2- en swap-\n"
-"partities in de vrije ruimte op uw harde schijf.\n"
-"\n"
-" * \"Meer\": geeft toegang tot extra opties:\n"
-"\n"
-"    * \"Partitietabel opslaan\": slaat de partitietabel op op een diskette. "
-"Nuttig om\n"
-"later zonodig de partitietabel te herstellen. Het is sterk aanbevolen deze "
-"stap uit\n"
-"te voeren.\n"
-"    * \"Partitietabl herstellen\": deze optie stelt u in staat om een eerder "
-"opgeslagen\n"
-"partitietabel van diskette te herstellen.\n"
-"\n"
-"    * \"Partitietabel redden\": indien uw partitietabel is beschadigd, kunt "
-"u deze\n"
-"trachten te herstellen met deze optie. Weest u voorzichtig en onthoud dat "
-"dit\n"
-"kan mislukken.\n"
-"\n"
-"    * \"Partitietabel herladen\": gooit alle veranderingen weg en laadt de\n"
-"partitietabel waarmee u begon\n"
-"\n"
-"    * \"Auto-koppeling verwisselbare media\": het deselecteren van deze "
-"optie\n"
-"dwingt gebruikers om handmatig verwisselbare media zoals diskettes en\n"
-"CD-ROMs te koppelen en te ontkoppelen.\n"
-"\n"
-" * \"Wizard\": gebruik deze optie indien u een wizard wenst te gebruiken om\n"
-"uw harde schijf mee te partitioneren. Dit is aanbevolen als u geen brede "
-"kennis\n"
-"heeft over partitioneren.\n"
-"\n"
-" * \"Ongedaan maken\": gebruik deze optie om uw wijzigingen te annuleren.\n"
-"\n"
-" * \"Schakel naar normale / expert modus\": laat extra handelingen toe op\n"
-"partities (Type, opties, formatteren) en geeft meer informatie.\n"
-"\n"
-" * \"Klaar\": wanneer u klaar bent met het partitioneren van uw harde "
-"schijf, zal dit\n"
-"de wijzigingen wegschrijven naar schijf.\n"
-"\n"
-"Merk op: u kunt iedere optie met behulp van het toetsenbord bereiken. "
-"Navigeer door\n"
-"de partities met behulp van [Tab] en [Omhoog/Omlaag] pijlen.\n"
-"\n"
-"Wanneer een partitie is geselecteerd, kunt u deze toetscombinaties "
-"gebruiken:\n"
-"\n"
-" * Ctrl+c om een nieuwe partitie te cre�ren (als een lege ruimte is "
-"geselecteerd);\n"
-"\n"
-" * Ctrl+d om een partitie te verwijderen;\n"
-"\n"
-" * Ctrl+m om het koppelpunt in te stellen.\n"
-"\n"
-"Voor meer informatie over de verschillende types bestandssystemen die er "
-"zijn,\n"
-"leest u het hoofdstuk 'ext2fs' van de ``Referentie Handleiding''.\n"
-"\n"
-"In het geval dat u op een PPC computer aan het installeren bent, zult u een "
-"kleine\n"
-"HFS \"bootstrap\"-partitie van tenminste 1MB willen cre�ren welke gebruikt "
-"zal\n"
-"worden door de yaboot opstartlader. Indien u liever de partitie wat groter "
-"maakt,\n"
-"zeg 50MB, dan vindt u het misschien een nuttige plek om een reserve kernel-\n"
-"en ramdisk beeldbestand in op te slaan voor opstart-noodgevallen."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Er is meer dan ��n Microsoft Windows partitie op uw harde schijf bespeurd.\n"
-"Kiest u degene die u wilt verkleinen om uw nieuwe Mandrake Linux\n"
-"besturingssysteem te kunnen installeren.\n"
-"\n"
-"Elke partitie wordt getoond als volgt: \"Linux naam\", \"Windows naam\"\n"
-"\"Capaciteit\".\n"
-"\n"
-"\"Linux naam\" is gestructureerd: \"harde schijf-type\", \"harde schijf-teken"
-"\",\n"
-"\"partitienummer\" (bijvoorbeeld \"hda1\").\n"
-"\n"
-"\"Harde schijf-type\" is \"hd\" indien uw harde schijf een IDE-schijf is en\n"
-"\"sd\" indien het een SCSI-schijf is.\n"
-"\n"
-"\"Harde schijf-teken\" is altijd een letter na \"hd\" of \"sd\". Bij IDE-\n"
-"harde schijven:\n"
-"\n"
-" * \"a\" betekent \"master apparaat op de primaire IDE controller\",\n"
-"\n"
-" * \"b\" betekent \"slave apparaat op de primaire IDE controller\",\n"
-"\n"
-" * \"c\" betekent \"master apparaat op de secundaire IDE controller\",\n"
-"\n"
-" * \"d\" betekent \"slave apparaat op de secundaire IDE controller\".\n"
-"\n"
-"Bij SCSI harde schijven betekent een \"a\" \"laagste SCSI ID\", een\"b\" "
-"\"op ��n na laagste SCSI ID\", enzovoort.\n"
-"\n"
-"\"Windows naam\" is de letter van uw harde schijf onder Windows (de\n"
-"eerste schijf of partitie wordt \"C:\" genoemd)."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Even geduld a.u.b. Deze operatie kan enkele minuten duren."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX moet nu weten of u een standaard (\"Aanbevolen\") installatie wilt\n"
-"uitvoeren, of meer controle wilt kunnen uitoefenen (\"Expert\"). U heeft "
-"verder\n"
-"de keus tussen het uitvoeren van een nieuwe installatie en het opwaarderen\n"
-"van een reeds aanwezig Mandrake Linux systeem:\n"
-" * \"Installeren\" Wist het vorige systeem volledig. Echter, afhankelijk van "
-"hoe\n"
-"uw computer momenteel is ingesteld, is het mogelijk om oude (Linux- of "
-"andere)\n"
-"partities onveranderd te behouden.\n"
-"\n"
-" * \"Opwaarderen\" De installatieklasse laat u eenvoudigweg de pakketten\n"
-"vernieuwen die nu op uw Mandrake Linux-systeem ge�nstalleerd zijn. Het\n"
-"behoudt de huidige partities van uw harde schijven zowel als de\n"
-"gebruikersconfiguraties. Alle andere configuratiestappen van een gewone\n"
-"installatie zullen beschikbaar blijven.\n"
-"\n"
-" * \"Alleen pakketten opwaarderen\" Deze gloednieuwe installatieklasse\n"
-"laat u een bestaand Mandrake Linux-systeem opwaarderen met behoud\n"
-"van de gehele systeemconfiguratie. Het is mogelijk om nieuwe pakketten\n"
-"toe te voegen aan de huidige installatie.\n"
-"\n"
-"Opwaarderen zou goed moeten gaan voor Mandrake Linux-systemen\n"
-"vanaf versie 8.1.\n"
-"\n"
-"Kies, afhankelijk van uw kennis van GNU/Linux, ��n van de volgende\n"
-"mogelijkheden:\n"
-"\n"
-" * Aanbevolen: kies dit als u nog nooit een GNU/Linux besturingssysteem "
-"hebt\n"
-"ge�nstalleerd. De installatie zal erg gemakkelijk verlopen en er zullen u\n"
-"slechts enkele vragen gesteld worden.\n"
-"\n"
-" * Expert: als u een goede kennis bezit van GNU/Linux kunt u deze\n"
-"installatieklasse kiezen. De expert-installatie staat u toe een in hoge "
-"mate\n"
-"aangepaste installatie uit te voeren. Het beantwoorden van sommige vragen\n"
-"kan moeilijk zijn als u geen goede kennis van GNU/Linux bezit, dus kies dit\n"
-"niet tenzij u weet wat u doet."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normaal gesproken selecteert DrakX het juiste toetsenbord voor u\n"
-"(afhankelijk van de taal die u heeft gekozen) en zult u deze stap niet eens\n"
-"te zien krijgen. Het is echter mogelijk dat u een toetsenbord bezit dat "
-"niet\n"
-"exact correspondeert met uw taal: bijvoorbeeld, als u een Engels sprekende\n"
-"Zwitser bent wilt u nog steeds dat uw toetsenbordinstelling op Zwitsers "
-"staat.\n"
-"Of indien u Engels spreekt maar zich in Quebec bevindt, verkeert u "
-"misschien\n"
-"in dezelfde situatie. In beide gevallen zult u terug moeten gaan naar deze\n"
-"installatiestap en het juiste toetsenbord uit de lijst kiezen.\n"
-"\n"
-"Klik op de \"Meer\"-knop om de complete lijst van ondersteunde\n"
-"toetsenbordindelingen te zien."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Kiest u de gewenste taal voor installatie en gebruik op uw computer.\n"
-"\n"
-"Door te klikken op de \"Geavanceerd\"-knop kunt u andere talen selecteren\n"
-"die op uw werkstation ge�nstalleerd moeten worden. Het selecteren van\n"
-"andere talen zal de taalspecifieke bestanden voor systeemdocumentatie\n"
-"en applicaties installeren. Als u bijvoorbeeld gastheer bent voor Spaanse\n"
-"gebruikers op uw machine, selecteert u Nederlands als eerste taal in het\n"
-"boom-overzicht en in de Geavanceerd-afdeling klikt u op de grijze ster "
-"naast\n"
-"\"Spaans|Spanje\".\n"
-"\n"
-"Merk op dat meerdere talen ge�nstalleerd kunnen worden. Zodra u enige\n"
-"extra taalgebieden heeft geselecteerd, klikt u op de \"OK\"-knop om verder\n"
-"te gaan."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Normaal gesproken neemt DrakX aan dat u een tweeknops-muis heeft en\n"
-"zal deze instellen voor het nadoen van een derde knop. DrakX zoekt zelf uit\n"
-"of dit een PS/2-, seri�le- of USB-muis is.\n"
-"\n"
-"Indien u een ander type muis wenst te specificeren, selecteer dan het "
-"juiste\n"
-"type uit de getoonde lijst.\n"
-"\n"
-"Indien u een andere muis kiest dan de standaardmuis, zult u een muis-\n"
-"testscherm te zien krijgen. Gebruik de knoppen en het wieltje om te\n"
-"controleren dat de instellingen goed zijn. Als de muis niet correct werkt,\n"
-"druk dan op de spatiebalk of Enter om te \"Annuleren\" en kies opnieuw."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Gelieve de juiste poort te kiezen. COM1 onder Windows wordt bijvoorbeeld\n"
-"\"ttyS0\" genoemd onder GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Dit is de meest cruciale beslissing voor de beveiliging van uw GNU/Linux\n"
-"systeem: u moet het \"root\"-wachtwoord invoeren. \"root\" is de systeem-\n"
-"beheerder en is de enige die geautoriseerd is om updates uit te voeren,\n"
-"gebruikers toe te voegen, de algehele systeemconfiguratie te wijzigen,\n"
-"enzovoort. Kortom, \"root\" kan alles doen! Daarom dient u een lastig\n"
-"te raden wachtwoord te kiezen - DrakX vertelt het u als het te makkelijk\n"
-"is. Zoals u kunt zien kunt u ervoor kiezen geen wachtwoord in te vullen,\n"
-"maar dit raden wij sterk af al was het maar om deze ene reden: denk\n"
-"niet dat alleen omdat u GNU/Linux opgestart heeft, uw andere\n"
-"besturingssystemen niet aangetast kunnen worden door vergissingen.\n"
-"Omdat \"root\" alle beperkingen kan overschrijden en onbedoeld alle\n"
-"gegevens op partities kan wissen door achteloos deze partities te\n"
-"benaderen, is het belangrijk dat het lastig is om \"root\" te worden.\n"
-"\n"
-"Het wachtwoord zou een mix van alfanumerieke karakters moeten zijn en\n"
-"tenminste 8 karakters lang. Schrijf nooit het \"root\"-wachtwoord op - dat\n"
-"maakt het te makkelijk om een systeem te compromitteren.\n"
-"\n"
-"Aan de andere kant, maak ook het wachtwoord niet te lang of gecompliceerd\n"
-"omdat u het moet kunnen onthouden zonder al te veel moeite. \n"
-"\n"
-"Het wachtwoord zal niet op het scherm getoond worden wanneer u het\n"
-"intypt. Vandaar dat u het wachtwoord tweemaal moet intypen om de kans\n"
-"te verminderen dat u een typfout maakt. Indien u toevallig dezelfde typfout\n"
-"twee keer maakt, dan zal dit \"incorrecte\" wachtwoord gebruikt moeten\n"
-"worden bij de eerste keer dat u verbinding maakt.\n"
-"\n"
-"In expert-modus wordt u gevraagd of u verbinding gaat maken met een\n"
-"authenticatie-server zoals NIS of LDAP.\n"
-"\n"
-"Indien uw netwerk het LDAP (of NIS) protocol gebruikt voor authenticatie,\n"
-"selecteer dan \"LDAP\" (of NIS). In het geval dat u dit niet weet, "
-"raadpleeg\n"
-"dan uw netwerkbeheerder.\n"
-"\n"
-"Indien uw computer niet verbonden is aan een beheerd netwerk, zult u\n"
-"willen kiezen voor \"Lokale bestanden\" als wijze van authenticatie."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO en GRUB zijn opstartladers voor GNU/Linux. Normaal gesproken\n"
-"is deze fase volledig geautomatiseerd. In feite analyseert DrakX de\n"
-"bootsector van de schijf en handelt al naar gelang hetgeen hier\n"
-"gevonden wordt:\n"
-"\n"
-"  * als een Windows bootsector gevonden is, zal deze vervangen\n"
-"worden door een GRUB/LILO bootsector. Dientengevolgde zult u\n"
-"ofwel GNU/Linux kunnen opstarten ofwel een ander besturingssysteem;\n"
-"\n"
-"  * als een GRUB- of LILO bootsector gevonden is zal deze vervangen\n"
-"worden door een nieuwe;\n"
-"\n"
-"In het geval dat er onzekerheid is, zal DrakX een dialoogvenster\n"
-"weergeven met diversie opties.\n"
-"\n"
-"  * \"Te gebruiken opstartlader\": u heeft drie keuzes:\n"
-"\n"
-"    * \"GRUB\": indien u GRUB prefereert (tekstmenu).\n"
-"\n"
-"    * \"LILO met grafisch menu\" indien u LILO met grafische interface\n"
-"prefereert.\n"
-"\n"
-"    * \"LILO met tekstmenu\": indien u LILO met tekstmenu-interface\n"
-"prefereert.\n"
-"\n"
-" * \"Opstartapparaat\": in de meeste gevallen zult u de standaardkeuze\n"
-"(\"/dev/hda\") niet veranderen, maar als u dat prefereert kan de\n"
-"opstartlader op de tweede harde schijf (\"/dev/hdb\") ge�nstalleerd\n"
-"worden, of zelfs op een diskette (\"/dev/fd0\").\n"
-"\n"
-" * \"Periode voordat standaard beeldbestand opgestard wordt\":\n"
-"wanneer de computer opnieuw wordt opgestart, is dit de periode\n"
-"die de gebruiker heeft om een ander item te kiezen uit het opstartmenu\n"
-"voordat de standaardoptie gekozen wordt.\n"
-"\n"
-"!! Let op dat indien u geen opstartlader installeert (door hier \"Annuleren"
-"\"\n"
-"te kiezen) u ervoor moet zorgen dat u een manier heeft om uw Mandrake\n"
-"Linux-systeem op te starten! Zorg er tevens voor dat u weet wat u doet\n"
-"wanneer u ��n van de opties wijzigt. !!\n"
-"\n"
-"Onder de \"Geavanceerd\"-knop in dit dialoogvenster zitten veel\n"
-"geavanceerde opties, waar alleen een gevorderde gebruiker iets\n"
-"aan heeft.\n"
-"\n"
-"Nadat u de algemene opstartlader-parameters heeft geconfigureerd,\n"
-"wordt u de lijst van opstartopties getoond die beschikbaar zullen zijn\n"
-"bij het opstarten.\n"
-"\n"
-"Als er een ander besturingssysteem op uw computer ge�nstalleerd is, zal\n"
-"het automatisch aan het opstartmenu worden toegevoegd. U kunt hier de\n"
-"bestaande opties fijn afregelen. Selecteer een item en klik op \"Wijzigen\"\n"
-"om hem te wijzigen of te verwijderen; \"Toevoegen\" cre�ert een nieuw\n"
-"item en \"Klaar\" gaat door naar de volgende installatiestap."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (de LInux LOader) en GRUB zijn opstart-laders: ze kunnen Linux of\n"
-"eender welk ander besturingssysteem opstarten op uw computer.\n"
-"Normaal gesproken worden deze besturingssystemen correct bespeurd en\n"
-"ge�nstalleerd. Als dit niet het geval is, kunt u handmatig een ingang "
-"toevoegen\n"
-"op dit scherm. Let goed op dat u de juiste opties kiest.\n"
-"\n"
-"U wilt verder misschien niet iedereen toegang geven tot die "
-"besturingssystemen.\n"
-"In dat geval  kunt u de overeenkomstige ingangen verwijderen. Maar dan zult\n"
-"u echter wel een opstartdiskette nodig hebben om ze nog te kunnen opstarten!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Hier moet u ingeven waar u de informatie wenst te\n"
-"plaatsen die nodig is om GNU/Linux op te starten.\n"
-"\n"
-"\n"
-"Tenzij u precies weet wat u doet, kiest u \"Eerste sector van\n"
-"station (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Hier selecteren we een printsysteem voor uw computer. Andere\n"
-"besturingssystemen geven u er wellicht maar ��n, maar Mandrake\n"
-"heeft er drie.\n"
-"\n"
-" * \"pdq\" - hetgeen betekent \"print, don't queue\", is de keuze indien\n"
-"u een directe verbinding tussen uw computer en uw printer heeft en u\n"
-"in staat wilt zijn om printtaken snel te stoppen in het geval van\n"
-"papierstoringen en u niet beschikt over netwerkprinters. Het kan\n"
-"alleen omgaan met erg simpele netwerkprinttaken en is enigszins\n"
-"langzaam wanneer gebruikt in een netwerk. Kies \"pdq\" indien\n"
-"dit uw eerste kennismaking met GNU/Linux is. U kunt uw keuze\n"
-"achteraf nog wijzigen door PrinterDrake te draaien vanuit het\n"
-"Mandrake Controlecentrum op de expert-knop te klikken.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'' is uitstekend geschikt\n"
-"om naar uw lokale printer af te drukken maar ook naar de andere kant\n"
-"van de planeet. Het is eenvoudig en kan dienstdoen als een server of\n"
-"een client voor het antieke \"lpd\" printsysteem, zodat het compatibel\n"
-"is met voorgaande systemen. Het kent vele kunstjes, maar een\n"
-"basisinstallatie is bijna net zo eenvoudig als \"pdq\". Indien u dit nodig\n"
-"heeft om een \"lpd\"-server te emuleren, dient u de \"cups-lpd\"-daemon\n"
-"in te schakelen. CUPS heeft grafische schillen voor het afdrukken of\n"
-"het kiezen van printeropties.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. Dit systeem kan\n"
-"ongeveer hetzelfde als de anderen, maar het kan ook afdrukken naar\n"
-"printers gekoppeld aan een Novell Netwerk, omdat het het IPX-protocol\n"
-"ondersteunt. Verder kan het direct afdrukken naar shell-opdrachten.\n"
-"Indien u Novell nodig heeft of het afdrukken naar opdrachten zonder\n"
-"een afzonderlijk pijplijn-construct, gebruik dan lprNG. In andere gevallen\n"
-"verdient CUPS de voorkeur omdat het eenvoudiger is en beter werkt\n"
-"in netwerkverband."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX is nu bezig met het bespeuren van IDE-apparaten die in uw\n"
-"computer aanwezig zijn. Het zal tevens zoeken naar ��n of meer PCI\n"
-"SCSI-kaart(en) in uw systeem. Als een SCSI-kaart gevonden is, zal\n"
-"DrakX automatisch he geschikte stuurprogramma installeren.\n"
-"\n"
-"Omdat hardware-bespeuring niet altijd een stuk hardware bespeurt, zal\n"
-"DrakX u vragen om te bevestigen dat er een PCI SCSI-kaart aanwezig is.\n"
-"Klik op \"Ja\" indien u weet dat er een SCSI-kaart in uw machine is\n"
-"ge�nstalleerd. U krijgt een lijst van SCSI-kaarten te zien waaruit u kunt\n"
-"kiezen. Klik op \"Nee\" indien u geen SCSI-hardware heeft. In het geval\n"
-"dat u niet zeker bent dan kunt u de lijst van bespeurde hardware in uw\n"
-"computer nagaan door \"Bekijk hardware-info\" te selecteren en op \"OK\"\n"
-"te klikken. Bekijk de lijst van hardware en klik vervolgens op de \"OK\"-\n"
-"knop om terug te gaan naar de SCSI-interface vraag.\n"
-"\n"
-"Indien u uw adapter handmatig moet aangeven zal DrakX vragen of u\n"
-"er opties voor wilt specificeren. U kunt het beste DrakX toestaan om\n"
-"de hardware te onderzoeken om na te gaan of er kaart-specifieke opties\n"
-"nodig zijn om de hardware te initialiseren. Dit werkt normaal gesproken\n"
-"goed.\n"
-"\n"
-"Als DrakX niet in staat is om te onderzoeken welke opties doorgegeven\n"
-"moeten worden, zult u handmatig het stuurprogramma van opties moeten\n"
-"voorzien. Gelieve de \"Gebruikershandleiding\" (hoofdstuk 3, paragraaf\n"
-"\"Het verzamelen van informatie over uw hardware\") na te lezen voor\n"
-"tips over hoe u de benodigde parameters uit de documentatie van uw\n"
-"hardware haalt, of van de webpagina van de fabrikant (als u \n"
-"internettoegang heeft), of uit Microsoft Windows (als u deze hardware\n"
-"met Windows heeft gebruikt op uw systeem)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Hier ziet u verscheidene paramaters die betrekking hebben op uw computer.\n"
-"Afhankelijk van welke hardware u heeft, kunt u al dan niet (zie hieronder):\n"
-"\n"
-" * \"Muis\": de huidige muisconfiguratie nagaan en zonodig op deze knop "
-"klikken\n"
-"om hem aan te passen.\n"
-"\n"
-" * \"Toetsenbord\": de huidige toetsenbordindeling nagaan en zonodig op "
-"deze\n"
-"knop klikken om hem aan te passen.\n"
-"\n"
-" * \"Tijdzone\": Normaal gesproken raadt DrakX uw tijdzone aan de hand van "
-"de\n"
-"taal die u gekozen heeft. Maar hier, net zoals bij de keuze voor een "
-"toetsenbord,\n"
-"hoeft u zich niet in het land te bevinden dat correspondeert met de gekozen "
-"taal.\n"
-"Daarom is het mogelijk dat u op de \"Tijdzone\"-knop moet klikken om de klok "
-"in\n"
-"te stellen aan de hand van de tijdzone waarin u zich bevindt.\n"
-"\n"
-" * \"Printer\": klikken op de \"Geen printer\"-knop zal de "
-"printerconfiguratie-wizard\n"
-"openen.\n"
-"\n"
-" * \"Geluidskaart\": indien een geluidskaart bespeurd is op uw systeem, "
-"wordt dat\n"
-"hier weergegeven. Het is niet mogelijk dit aan te passen gedurende de "
-"installatie.\n"
-"\n"
-" * \"TV-kaart\": indien een TV-kaart bespeurd is op uw systeem, wordt dat "
-"hier\n"
-"weergegeven. Het is niet mogelijk dit aan te passen gedurende de "
-"installatie.\n"
-"\n"
-"* \"ISDN-kaart\": indien een ISDN-kaart bespeurd is op uw systeem, wordt "
-"dat\n"
-"hier weergegeven. U kunt op de knop klikken om de parameters aan te passen\n"
-"die erbij horen."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Kies de harde schijf die u wilt wissen om uw nieuwe\n"
-"Mandrake Linux partitie op te installeren. Wees voorzichtig, alle data die\n"
-"op deze schijf staat zal verloren gaan, en niet terug te halen zijn!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klik op \"OK\" wanneer u alle gegevens en partities die aanwezig zijn \n"
-"op deze harde schijf wilt wissen. Wees voorzichtig, want na het klikken \n"
-"op \"OK\" zult u niet in staat zijn om wat voor op schijf aanwezige "
-"gegevens \n"
-"of partities dan ook terug te halen, met inbegrip van alle Windows-"
-"gegevens.\n"
-"\n"
-"Klik op \"Annuleren\" om deze operatie te annuleren zonder daarbij \n"
-"gegevens of partities aanwezig op schijf te verliezen."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "U dient tevens %s te formatteren"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"U heeft de volgende server(s) geselecteerd: %s\n"
-"\n"
-"\n"
-"Deze servers worden standaard geactiveerd. Ze hebben geen bekende\n"
-"beveiligingsproblemen, maar het is mogelijk dat er nieuwe gevonden worden.\n"
-"Zorg er in dat geval voor ze zo spoedig mogelijk op te waarderen.\n"
-"\n"
-"\n"
-"Weet u zeker dat u deze servers wilt installeren?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan niet uitzenden zonder NIS-domein"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr ""
-"Plaats een met het FAT-bestandssysteem geformatteerde diskette in station %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Deze diskette is niet FAT-geformatteerd"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Om deze opgeslagen pakketselectie te gebruiken, start u de installatie \n"
-"met ''linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fout bij het lezen van bestand %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sommige hardware op uw computer heeft ''fabrikantsgebonden'' drivers \n"
-"nodig om te kunnen functioneren. U kunt informatie hierover vinden op: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"U moet een root-partitie hebben.\n"
-"Hiervoor dient u een partitie aan te maken (of op een bestaande partitie "
-"teklikken). Daarna kiest u de actie ``Koppelpunt'' en stelt u dit i nop `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "U moet een swap-partitie hebben"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"U heeft geen swap-partitie!\n"
-"\n"
-"Toch verdergaan?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-"U moet een partitie met FAT-bestandssysteem gekoppeld hebben aan /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Gebruik vrije ruimte"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Niet genoeg vrije ruimte om nieuwe partities te maken"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Gebruik een bestaande partitie"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Er is geen bestaande partitie om te gebruiken"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Gebruik de Windows partitie voor loopback "
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Welke partitie wenst u te gebruiken voor Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Kies de grootte"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Root-partitie-grootte in MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Swap-partitie-grootte in MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Gebruik de vrije ruimte op de Windows partitie"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Van welke partitie wilt u de grootte veranderen?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Bezig met berekenen van Windows bestandssysteemgrenzen"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"De FAT grootte-aanpasser was niet instaat met uw partitie om te gaan, \n"
-"dit is fout gegaan: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Uw Windows partitie is te gefragmenteerd, start a.u.b. eerst ``defrag'' eerst"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"WAARSCHUWING!\n"
-"\n"
-"DrakX moet nu de grootte van uw Windows-partitie aanpassen. Wees "
-"voorzichtig:\n"
-"deze operatie is gevaarlijk. Als u dit niet reeds gedaan heeft, dient u "
-"eerst de\n"
-"installatie af te breken, scandisk (en eventueel defrag) onder Windows te "
-"draaien,\n"
-"en daarna de installatie opnieuw te starten. Maakt u ook een "
-"veiligheidskopie van uw data.\n"
-"Als u zeker bent, klik dan OK."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Welke grootte wilt u gebruiken om windows op?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "Partitie %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT grootte-aanpassing mislukt: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Er is geen FAT partitie om de grootte van aan te passen of om als \n"
-"loopback te gebruiken (of er is te weinig ruimte over)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Volledige harde schijf wissen"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Verwijder Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "U heeft meer dan ��n harde schijf, op welke wilt u Linux installeren?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"ALLE bestaande partities en de data die ze bevatten, zal worden gewist van "
-"schijf %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Aangepaste schijf-partitionering"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Gebruik fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"U kan nu uw schijf %s partitioneren.\n"
-"Vergeet niet op te slaan met `w' wanneer u klaar bent."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "U heeft niet genoeg vrije ruimte op uw Windows partitie"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ik kan geen partitie meer toevoegen"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "De DrakX partitie wizard heeft de volgende oplossingen gevonden:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partitionering mislukt: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Bezig met opstarten van het netwerk"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Bezig met stoppen van het netwerk"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Er is een fout opgetreden, maar ik weet niet hoe deze te behandelen.\n"
-"Als u verdergaat, is dit op eigen risico."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dubbel koppelpunt %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Sommige belangrijke pakketen werden niet juist\n"
-"ge�nstalleerd. Of uw cdrom drive of uw cdrom is defect.\n"
-"Controleer de cdrom op een ge�nstalleerde computer met\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Welkom bij %s!"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Geen diskettestation beschikbaar"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Overgang naar stap `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Uw systeem heeft weinig bronnen beschikbaar. U zou problemen kunnen\n"
-"ondervinden bij het installeren van Mandrake Linux. Als dit gebeurt,\n"
-"kunt u een text installatie proberen. Om dit te doen, drukt u op `F1'\n"
-"terwijl de CDROM opstart, en dan voert u `text' in."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installatie-klasse"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Gelieve een van de volgende installatieklasses te kiezen:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "De totale grootte voor de geselecteerde groepen is ongeveer %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Als u minder dan deze grootte wenst te installeren,\n"
-"selectere dan het percentage pakketten dat u wenst te installeren.\n"
-"\n"
-"Een laag percentage zal enkel de belangrijkste pakketten installeren;\n"
-"een percentage van 100%% zal alle geselecteerde pakketten installeren."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"U heeft schijfruimte voor slechts %d%% van deze pakketten.\n"
-"\n"
-"Als u minder wenst te installeren,\n"
-"selecteer dan het percentage pakketten dat u wenst te installeren.\n"
-"Een laag percentage zal enkel de belangrijkste pakketten installeren;\n"
-"een percentage van %d%% zal alle geselecteerde pakketten installeren."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Het is mogelijk preciezer te kiezen in de volgende stap."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentage pakketten om te installeren"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Pakket-groep Selectie"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Individuele pakketselectie"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Totale grootte: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Slecht pakket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Naam: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versie: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Grootte: %d kB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Belangrijkheid: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "U kan dit pakket niet selecteren omdat er te weinig vrije ruimte is"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "De volgende pakketten zullen ge�nstalleerd worden"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "De volgende pakketten zullen gede�nstalleerd worden"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "U kan dit pakket niet (de)selecteren"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dit is een verplicht pakket, het kan niet gedeselecteerd worden"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "U kan dit pakket niet deselecteren. Het is al geinstalleerd."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Dit pakket moet opgewaardeerd worden.\n"
-"Weet u zeker dat u het wenst te deselecteren?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "U kunt dit pakket niet deselecteren. Het moet opgewaardeerd worden."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Toon automatisch geselecteerde pakketten"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installeren"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Laden/Opslaan op diskette"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Bezig met vernieuwen van pakket-selectie"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimale installatie"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Kies de pakketten die u wenst te installeren"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Bezig met installeren"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Bezig met schatten"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tijd over "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Bezig met voorbereiden van installatie, even geduld alstublieft"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakketten"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Bezig met installeren van pakket %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Accepteren"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Weigeren"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Verwissel uw CD-ROM!\n"
-"\n"
-"\n"
-"Gelieve de CD-ROM met als naam \"%s\" in uw station te plaatsen en Ok te "
-"kiezen wanneer u klaar bent.\n"
-"Als u deze CD niet heeft, klik dan Annuleren om verdere installatie vanaf "
-"deze CD te vermijden."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Toch verdergaan?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Er was een fout bij het sorteren van de pakketten:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Er was een fout bij het installeren van de pakketten:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Waarschuwing\n"
-"\n"
-"Leest u aandachtig de voorwaarden hieronder. Als u het niet eens bent \n"
-"met eender welk onderdeel, is het u niet toegestaan om de volgende \n"
-"CD-media te installeren. Klik op 'Weigeren' om de installatie voort te \n"
-"zetten zonder deze media te gebruiken.\n"
-"\n"
-"\n"
-"Sommige componenten die op de volgende CD-media staan staan niet \n"
-"onder de GPL-licentie of dergelijke overeenkomsten. Ieder van deze \n"
-"componenten valt onder de regels en voorwaarden van zijn eigen \n"
-"specifieke licentie. Leest u dergelijke licenties alstublieft aandachtig \n"
-"en ga ermee akkoord voordat u de genoemde componenten gebruikt \n"
-"of opnieuw distribueert. \n"
-"Dergelijke licenties zullen in het algemeen het overnemen, dupliceren \n"
-"(behalve voor reservekopie-doeleinden), herdistribueren, reverse \n"
-"engineering, de-assemblage, de-compilatie of aanpassing van het \n"
-"component voorkomen. Het doorbreken van deze overeenkomst zal \n"
-"onmiddelijk uw rechten onder de specifieke licentie opheffen. Tenzij \n"
-"de specifieke licentie u zulke rechten toekent, kunt u in het algemeen \n"
-"de programma's niet op meer dan ��n machine installeren, of hen \n"
-"aanpassen voor gebruik over een netwerk. Als u twijfelt, neem dan \n"
-"alstublieft rechtstreeks contact op met de distributeur van het \n"
-"component. \n"
-"Het doorgeven aan een derde partij of het kopi�ren van dergelijke \n"
-"componenten is in het algemeen verboden.\n"
-"\n"
-"\n"
-"Alle rechten op de componenten van de volgende CD-media behoren \n"
-"aan hun respectievelijke auteurs en zijn beschermd door wetten met \n"
-"betrekking tot intellectueel eigendom en copyright van software- \n"
-"programma's. \n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Er is een fout opgetreden"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Weet u zeker dat u het installatieprogramma wilt verlaten?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licentie overeenkomst"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Toetsenbord"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Gelieve uw toetsenbord-layout te kiezen."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Dit is de volledige lijst van beschikbare toetsenborden"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Welke installatie-klasse wenst u?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installatie/Update"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Is dit een installatie of een opwaardering?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Aanbevolen"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Opwaarderen"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Alleen pakketten opwaarderen"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Gelieve het type van uw muis te kiezen."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Muispoort"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Met welke seri�le poort is uw muis verbonden?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Muisknoppen emuleren"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emuleren van knop 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emuleren van knop 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Bezig met configureren van PCMCIA-kaarten..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE-Configuratie"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "Geen beschikbare partities"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Bezig met scannen van partities om mount punten te vinden"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Selecteer de koppelpunten"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ik kan uw partitietabel niet lezen, ze is te corrupt voor mij :-(\n"
-"Ik kan proberen door te gaan en de slechte partities verwijderen\n"
-"(ALLE DATA zal worden gewist!).\n"
-"De andere oplossing is om DrakX de de partitie tabel niet te laten "
-"aanpassen.\n"
-"(de fout is %s)\n"
-"\n"
-"Gaat u ermee akkoord alle partities te verliezen?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake kon de partitietabel niet correct inlezen.\n"
-"Als u verdergaat, is dit op eigen risico!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Er is geen vrije ruimte voor een \"bootstrap\" van 1MB! De installatie zal "
-"doorgaan, maar om uw systeem op te starten zult u de bootstrap partitie in "
-"DiskDrake moeten cre�ren."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Geen \"root\"-partitie gevonden om op te waarderen"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Root-partitie"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Wat is de root-partitie (/) van uw systeem?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"U dient te herstarten om de wijzigingen in de partitietabel te activeren."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Kies de partities die u wenst te formatteren"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Slechte blocks checken?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Bezig met formatteren van partities"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Bezig met aanmaken en formatteren van bestand %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Niet genoeg swap voor de installatie, voeg er wat toe"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Bezig met zoeken naar beschikbare pakketten"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Bezig met zoeken naar pakketten om op te waarderen"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Uw systeem heeft niet genoeg ruimte over voor installatie of opwaardering (%"
-"d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Volledig (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimaal (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Aanbevolen (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Gelieve te kiezen of u de pakketselectie wilt laden of opslaan op diskette.\n"
-"Het formaat is dezelfde als de met auto_install gegenereerde diskettes."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Laden van diskette"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Bezig met het laden van diskette"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Pakket-selectie"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Plaats een diskette met de pakket-selectie in diskettestation"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Schrijven naar floppy"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "De geselecteerde grootte is meer dan de beschikbare ruimte"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Type installatie"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"U heeft geen enkele pakketgroep geselecteerd\n"
-"Gelieve de minimale installatie die u wenst te kiezen."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Met X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Met basis-documentatie (aanbevolen!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Werkelijk minimale installatie (in het bijzonder geen urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Als u alle CDs in de lijst hierboven heeft, klik dan Ok.\n"
-"Als u geen enkele van die CDs heeft, klik dan Annuleren.\n"
-"Als maar enkele CDs zoek zijn, deselecteer ze dan, en klik Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-Rom genaamd \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Bezig met voorbereiden van installatie"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Bezig met installeren van pakket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Installatie na configuratie"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Plaats de gebruikte Opstartdiskette in station %s alstublieft"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Plaats de \"Modules Vernieuwen\"-diskette in station %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"U bent nu in staat software bedoeld voor encryptie te downloaden.\n"
-"\n"
-"WAARSCHUWING:\n"
-"\n"
-"Ten gevolge van verschillende algemene vereisten met betrekking tot deze\n"
-"software en opgelegd door verscheidene jurisdicties, dienen klanten en/of\n"
-"eindgebruikers van deze software zich ervan te vergewissen dat de wetten\n"
-"van hun jurisdictie hen toestaan  deze software te downloaden,\n"
-"opslaan en/of te gebruiken.\n"
-"\n"
-"Daarnaast zal de klant en/of eindgebruiker in het bijzonder erop letten "
-"niet\n"
-"de wetten van zijn/hun jurisdictie te overtreden. Indien de klant en/of\n"
-"eindgebruiker de bepalingen van de van toepassing zijnde wetten niet\n"
-"respecteert, zullen hem aanzienlijke sancties worden opgelegd.\n"
-"\n"
-"In geen geval zal Mandrakesoft, noch haar fabrikanten en/of leveranciers\n"
-"aansprakelijk gehouden worden voor welke speciale, indirecte of incidentele\n"
-"schade dan ook (inclusief, maar niet beperkt tot gederfde winsten, "
-"onderbreking\n"
-"van zakendoen, verlies van commerci�le gegevens en andere financi�le\n"
-"verliezen, en eventuele aansprakelijkheden en vergoedingen die betaald\n"
-"moeten worden als gevolg van een beslissing van een gerechtshof)\n"
-"voortkomend uit gebruik, bezit, of alleen het downloaden van deze software,\n"
-"waartoe de klant en/of eindgebruiker eventueel toegang zou kunnen hebben\n"
-"na de voorliggende overeenkomst te hebben getekend.\n"
-"\n"
-"\n"
-"Voor inlichtingen met betrekking tot deze overeenkomst, neemt u contact op "
-"met\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"U bent nu in de gelegenheid om vernieuwde pakketten te downloaden\n"
-"die uitgebracht zijn nadat de distributie uitkwam.\n"
-"\n"
-"U kunt beveiligingsreparaties of reparaties van programmafouten verkrijgen,\n"
-"maar u heeft wel een geconfigureerde internetverbinding nodig om verderte "
-"gaan.\n"
-"\n"
-"Wenst u de vernieuwde pakketten te installeren?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Bezig met verbinden met de Mandrake Linux website om de lijst met "
-"beschikbare mirrors te verkrijgen"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Kies een `mirror' om de pakketten van af te halen"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Bezig met de `mirror' te contacteren om de lijst met beschikbarepakketten te "
-"verkrijgen"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Wat is uw tijdzone?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardware-klok ingesteld op GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatische tijdssynchronisatie (met gebruik van NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP-server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Netwerk CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Geen printer"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Heeft u een ISA geluidskaart?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Draai \"sndconfig\" na de installatie om uw geluidskaart te configureren"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Geen geluidskaart bespeurd. Probeer \"harddrake\" na de installatie"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Overzicht"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Muis"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Tijdzone"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Interne ISDN kaart"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Geluidskaart"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-kaart"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Bestanden op deze computer"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Root-wachtwoord instellen"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Geen wachtwoord"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Dit wachtwoord is te makkelijk (moet tenminste %d tekens lang zijn)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Authenticatie"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Authenticatie LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP-server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Authenticatie NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS-domein"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS-server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Een bootdiskette zorgt ervoor dat u nog in uw Linux-systeem kan zonder\n"
-"afhankelijk te zijn van de normale bootloader. Dit is handig als u LILO\n"
-"(of grub) niet wil installeren op uw systeem, of als een ander "
-"besturingssysteem\n"
-"LILO verwijdert, of LILO werkt niet met uw hardware-configuratie.\n"
-"Een bootdiskette kan ook gebruikt worden met het Mandrake-reddings-image,\n"
-"waardoor het veel makkelijker wordt om te herstellen van grote systeem-\n"
-"fouten. Wil u nu een bootdiskette aanmaken voor uw systeem?\n"
-"Stop dan een diskette in het station en druk op \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Eerste diskettestation"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Tweede diskettestation"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Overslaan"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Een bootdiskette zorgt ervoor dat u nog in uw Linux-systeem kan zonder\n"
-"afhankelijk te zijn van de normale bootloader. Dit is handig als u LILO\n"
-"(of grub) niet wil installeren op uw systeem, of als een ander "
-"besturingssysteem\n"
-"LILO verwijdert, of LILO werkt niet met uw hardware-configuratie.\n"
-"Een bootdiskette kan ook gebruikt worden met het Mandrake-reddings-image,\n"
-"waardoor het veel makkelijker wordt om te herstellen van grote systeem-\n"
-"fouten. Wil u nu een opstartdiskette aanmaken voor uw systeem?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(WAARSCHUWING! U gebruikt XFS voor uw root-partitie,\n"
-"het cre�ren van een opstartdiskette op een 1.44MB-diskette\n"
-"zal hoogstwaarschijnlijk mislukken omdat XFS een zeer groot\n"
-"stuurprogramma benodigt)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Sorry, geen diskettestation beschikbaar"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Kies het diskettestation waarmee u de opstart-diskette wenst te maken"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Plaats een diskette in station %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Bezig met het aanmaken van de opstart-diskette"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Bezig met klaarmaken van opstartlader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Het heeft er alle schijn van dat u een OldWorld-\n"
-" of Onbekende machine heeft. De yaboot opstartlader \n"
-" zal voor u niet werken.\n"
-"De installatie zal doorgaan, maar u zult BootX nodig \n"
-"hebben om uw machine op te starten"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Wenst u aboot te gebruiken?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fout bij het installeren van aboot,\n"
-"toch proberen te installeren, zelfs als dat de eerste partitie vernietigt?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Bezig met opstart-lader installeren"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"De installatie van de bootloader is mislukt. De volgende fout werd gevonden:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Wellicht is het nodig om uw Open Firmware opstart-apparaat \n"
-" te veranderen om de opstartlader te activeren. Wanneer u geen \n"
-" opstartlader-prompt bij het opnieuw opstarten ziet, houdt dan \n"
-" Command-Option-O-F ingedrukt bij het opstarten en voer in: \n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Vervolgens voert u in: shut-down\n"
-"Bij de volgende keer opstarten zou u dan de opstartlader-prompt \n"
-"moeten zien."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Plaats een lege floppy in station %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Bezig met aanmaken van auto-installatiediskette"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Sommige stappen zijn nog niet voltooid.\n"
-"\n"
-"Weet u zeker dat u op dit moment wilt be�indigen?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gefeliciteerd, de installatie is voltooid. \n"
-"Verwijder de opstartmedia en druk op Enter om opnieuw op te starten.\n"
-"\n"
-"\n"
-"Voor informatie over verbeteringen die voor deze versie van Mandrake Linux\n"
-"beschikbaar zijn, raadpleegt u de Errata, beschikbaar van:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/8.2errata.php3\n"
-"\n"
-"Informatie over het configureren van uw systeem is beschikbaar in het\n"
-"\"post install\"-hoofdstuk van de Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Maak auto-installatiediskette aan"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Desgewenst kan de auto-installatie volledig geautomatiseerd worden,\n"
-"in dat geval zal het de harde schijf overnemen!\n"
-"(Deze functie is bedoeld voor het installeren op een andere machine.)\n"
-"\n"
-"Wellicht geeft u de voorkeur aan het herhalen van de installatie.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Geautomatiseerd"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Herhalen"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Pakket-selectie opslaan"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installatie %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> tussen elementen | <Spatie> selecteert | <F12> volgend "
-"scherm "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu is afwezig!"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "ontbrekende console-hulp"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Kies een bestand"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Geavanceerd"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Basis"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Even geduld"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr ""
-"Boom\n"
-"Uitbreiden"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr ""
-"Boom\n"
-"Inklappen"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Schakelen tussen gewoon en per-groep-gesorteerd"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Slechte keuze, probeer nog eens\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Uw keuze? (standaard %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr "Items die u dient in te vullen:%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Uw keuze? (0/1, standaard '%s')"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Knop '%s':%s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Wilt u op deze knop klikken?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Uw keuze? (standaard '%s'%s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Er zijn vele keuzes mogelijk (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Gelieve het eerste nummer van het 10-bereik dat u wilt bewerken,\n"
-"te kiezen, of geef eenvoudigweg Enter om verder te gaan.\n"
-"Uw keuze?"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Let op, een label is veranderd:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Opnieuw invoeren"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tsjechisch (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Duits"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spaans"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Fins"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Frans"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Noors"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Pools"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russisch"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Zweeds"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK toetsenbord"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US toetsenbord"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanees"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armeens (oud)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armeens (typmachine)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armeens (fonetisch)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbeidzjan (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgisch"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgaars (fonetisch)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaars (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Braziliaans (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusiaans"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Zwitsers (Duitse layout)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Zwitsers (Franse layout)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tsjechisch (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Duits (geen dode toetsen)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Deens"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noorwegen)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Zweeds)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Ests"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgisch (\"Russische\" layout)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgisch (\"Latin\" layout)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grieks"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hongaars"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroatisch"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelisch"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelisch (Fonetisch)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraans"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "IJslands"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiaans"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japans 106 toetsen"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreaans toetsenbord"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latijns-Amerikaans"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuaans AZERTY (oud)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuaans AZERTY (nieuw)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lithuaans \"nummer-rij\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuaans \"fonetisch\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Lets"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonisch"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Nederlands"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Pools (qwerty layout)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Pools (qwertz layout)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugees"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadees (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Roemeens (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Roemeens (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Roemeens (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Sloveens"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaaks (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaaks (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Servisch (cyrillisch)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai-toetsenbord"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tadzjikisch toetsenbord"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turks (traditioneel \"F\"-model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turks (modern \"Q\"-model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Oekra�ens"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US toetsenbord (internationaal)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamese \"nummer-rij\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Joegoslavisch (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Rechter Alt-knop"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Beide Shift-toetsen tegelijkertijd"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Control- en Shift-toetsen tegelijkertijd"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock-toets"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl- en Alt-toetsen tegelijkertijd"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt- en Shift-toetsen tegelijkertijd"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "\"Menu\"-toets"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Linker \"Windows\"-toets"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Rechter \"Windows\"-toets"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Circulaire mounts: %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Verwijder eerst de logische delen\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Ondersteuning voor PCMCIA bestaat niet meer voor 2.2 kernels. Gelieve een "
-"2.4 kernel te gebruiken."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - muis"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Algemene PS/2 wielmuis"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 knop"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Algemene 2-knopsmuis"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Algemeen"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Wiel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seri�el"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Algemene 3-knopsmuis"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech-muis (seri�el, oud C7-type)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "bus muis"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 knoppen"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 knoppen"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "geen"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Geen muis"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Test uw muis a.u.b."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Welk type muis heeft u?"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEEG UW WIELTJE"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Fins"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Volgende ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Vorige"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Is dit correct?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Verbinden met het Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"De meest gebruikte manier om te verbinden met adsl is met\n"
-"ppoe. Sommige verbindingen gebruiken pptp, enkele gebruiken\n"
-"dhcp. Als u het niet weet, kiest u 'gebruik pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "gebruik DHCP"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "gebruik pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "gebruik pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Welke dhcp client wenst u te gebruiken?\n"
-"Standaard is dit dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Er is geen ethernet netwerk adapter op uw systeem gevonden.\n"
-"Ik kan dit type connectie niet opzetten."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Kies de netwerk interface"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Kies a.u.b. met welke netwerkkaart u met het Internet wilt verbinden"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Geen netwerkkaart gevonden"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Bezig met configureren van netwerk"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Gelieve uw hostnaam in te voeren als u deze kent.\n"
-"Sommige DHCP servers hebben de hostnaam nodig om te werken.\n"
-"Het moet een volledige hostnaam zijn, zoals ``mybox.mylab.myco.com''.\n"
-"U mag ook het IP-adres van de gateway invoeren als u er een heeft."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Host naam:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Netwerk-configuratie wizard"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Extern ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interne ISDN kaart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Wat voor een ISDN connectie heeft u?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Welke ISDN-configuratie prefereert u?\n"
-"\n"
-"* De Oude configuratie gebruikt isdn4net. Het bevat\n"
-"  krachtige gereedschappen, maar is lastig te configureren\n"
-"  en niet-standaard.\n"
-"\n"
-"* De Nieuwe configuratie is gemakkelijker te begrijpen, meer\n"
-"  standaard maar bevat minder gereedschappen.\n"
-"\n"
-"Wij bevelen de lichtere configuratie aan.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nieuwe configuratie (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Oude configuratie (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN Configuratie"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Selecteer uw provider.\n"
-" Als uw provider niet in de lijst staat, kiest u Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europe protocol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europees protocol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protocol voor de rest van de wereld"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocol voor de rest van de wereld \n"
-" geen D-Channel (geleasde lijnen)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Welk protocol wenst u te gebruiken?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Welk type kaart heeft u?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ik weet het niet"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Als u een ISA kaart bezit, zouden de waardes op het volgende scherm moeten "
-"kloppen.\n"
-"\n"
-"Als  u een PCMCIA kaart bezit, moet u het irq en io van uw kaart weten.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Annuleren"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Verder"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Welke is uw ISDN kaart?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ik heb een ISDN PCI kaart gevonden, maar ik ken het merk niet. Selecteer a.u."
-"b. een PCI kaart op het volgende scherm."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Geen ISDN PCI kaart gevonden. Selecteer a.u.b. uw kaart op het volgende "
-"scherm."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Met welke seri�le poort is uw modem verbonden?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Inbel-opties"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Verbindingsnaam"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefoonnummer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Aanmeldingsnaam"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Gebaseerd op een script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Gebaseerd op een terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domeinnaam"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Eerste DNS-server (optioneel)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Tweede DNS-server (optioneel)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"U kunt nu de verbrinding verbreken of uw connectie herconfigureren."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"U kunt uw connectie herconfigureren"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "U bent op dit moment aangesloten op het Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"U kunt verbinding maken met het Internet of uw connectie herconfigureren"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "U bent op dit moment niet aangesloten op het Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Verbinden"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Verbinding verbreken"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Configureer de verbinding"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internet verbinding & configuratie"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "We gaan nu de %s -verbinding configureren."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"We gaan nu de %s -verbinding configureren.\n"
-"\n"
-"\n"
-"Klik op OK om door te gaan."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Netwerk-configuratie"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Omdat u een netwerk-installatie uitvoert, is uw netwerk reeds "
-"geconfigureerd.\n"
-"Klik op OK om uw configuratie te behouden, of op Annuleren om uw Internet & "
-"Netwerkverbinding opnieuw te configureren.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Welkom bij de Netwerk Configuratie Wizard\n"
-"\n"
-"We staan op het punt uw internet/netwerkverbinding te configureren.\n"
-"Als u de auto-detectie niet wilt gebruiken, deselecteer het aankruisvakje "
-"dan.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Kies het profiel om te configureren"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Gebruik auto-detectie"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Bezig met het detecteren van apparaten..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normale modemverbinding"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "gevonden op poort %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN-verbinding"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s ontdekt"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL-verbinding"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "gevonden op interface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabelverbinding"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "kabelverbinding gevonden"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN-verbinding"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet kaart(en) gevonden"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Selecteer de verbinding die u wenst te configureren"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"U heeft meerdere manieren om te verbinden met het Internet geconfigureerd.\n"
-"Kies degene die u wenst te gebruiken.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internetverbinding"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Wenst u bij aboot uw connectie te starten?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Netwerk configuratie"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Het netwerk dient herstart te worden"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Een probleem deed zich voor bij het herstarten van het netwerk:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gefeliciteerd, de netwerk- en internetconfiguratie is af.\n"
-"\n"
-"De configuratie zal nu worden toegepast op uw systeem.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"We raden u aan om nadat dit gebeurd is, uw X omgeving\n"
-"te herstarten om het hostnaam-veranderingprobleem\n"
-"te voorkomen."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Er zijn problemen opgetreden tijdens de configuratie.\n"
-"Test uw verbinding via net_monitor of mcc. Indien uw verbinding niet werkt, "
-"kunt u proberen de configuratie opnieuw op te starten."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"WAARSCHUWING: Dit apparaat is al geconfigureerd om verbinding te maken met "
-"Internet.\n"
-"Accepteer gewoon de instellingen om dit apparaat geconfigureerd te laten.\n"
-"Als u de onderstaande velden aanpast, wordt het apparaat opnieuw "
-"geconfigureerd"
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Gelieve de IP-configuratie voor deze machine in te geven.\n"
-"Elke ingang moet ingegeven worden als een IP adres in `dotted-decimal'-\n"
-"vorm (bijvoorbeeld 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Bezig met configureren van netwerk-apparaat %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr "(driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adres"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmasker"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(BootP/DHCP)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatisch IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Het IP-adres moet het formaat 1.2.3.4 hebben"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Gelieve uw hostnaam in te voeren.\n"
-"Het moet een volledige hostnaam zijn, zoals ``mybox.mylab.myco.com''.\n"
-"U mag ook het IP-adres van de gateway invoeren als u er een heeft."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (bijvoorbeeld %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway apparaat"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configuratie van proxie(s)"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP-proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Netwerkkaart id onthouden (nuttig voor laptops)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy moet http://... zijn"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy moet ftp://... zijn"
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet configuratie"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Wenst u nu te proberen een connectie te maken met Internet?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Bezig met testen van uw connectie..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "U bent op dit moment aangesloten op het Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Vanwege beveiligingsredenen zal het nu worden neergelegd."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Het lijkt erop dat dit systeem niet aangesloten is met\n"
-"het internet. Probeer uw connectie te herconfigureren."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Connectie configuratie"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Selecteer of vul onderstaand veld a.u.b. in"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ van de kaart"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Mem (DMA) van de kaart"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO van de kaart"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 van de kaart"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 van de kaart"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Uw persoonlijke telefoonnummer"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Naam van uw provider (bijv. provider.nl)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefoonnummer van uw provider"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 van uw provider (optioneel)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 van uw provider (optioneel)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Kies uw land"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Inbel mode"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Verbindingssnelheid"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Maximale wachttijd voor verbinding (in seconden)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Account Login (gebruikers-naam)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Wachtwoord"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "koppelen mislukt: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Extended partitie niet ondersteund op dit platform"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Er zit een gat in uw partitietabel, maar ik kan het niet gebruiken.\n"
-"De enige oplossing is om uw primaire partitie te verplaatsen zodat het gat "
-"naast de extended partitie komt te liggen"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Het herstellen van bestand %s is niet gelukt: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Slechte reservekopie"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fout bij het schrijven naar bestand %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Er is iets verdachts aan de gang op uw schijf. \n"
-"Een test om de integriteit van de gegevens de testen is mislukt.Dat betekent "
-"dat wanneer er iets naar schijf wordt geschreven,\n"
-"het uiteindelijk onleesbare troep wordt."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "must-have"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "belangrijk"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "heel leuk"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "leuk"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "misschien"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokale printer"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Netwerk printer"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Printer aan CUPS server op afstand"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Printer aan lpd server op afstand"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Netwerkprinter (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Printer aan SMB/Windows 95/98/NT server"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Printer aan NetWare server"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Voer een apparaat-URI voor de printer in"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Job doorsluizen naar een commando"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Onbekend model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokale printers"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Printers op afstand"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr "op parallelle poort  \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB printer \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", multi-functioneel apparaat op parallelle poort \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", multi-functioneel apparaat op USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ". multi-functioneel apparaat op HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", multi-functioneel apparaat"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", bezig met printen naar %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "op LPD server \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", poort %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "op Windows server \"%s\", share \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "op Novell server \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", met gebruik van opdracht %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Raw printer (geen stuurprogramma)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(aan %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(aan deze machine)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Op CUPS-server \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Standaard)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Selecteer Printer-verbinding"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hoe is de printer verbonden?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Printers aan een CUPS-server op afstand hoeft u hier niet te configureren; "
-"deze printers zullen automatisch bespeurd worden."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS configuratie"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "CUPS server specificeren"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Om toegang te krijgen tot CUPS-servers op afstand in uw lokale netwerk hoeft "
-"u hier niets te configureren; CUPS-servers informeren uw machine automatisch "
-"over hun printers. Alle printers die op dit moment bekend zijn bij uw "
-"computer zijn vermeld in het \"Printers op afstand\"-veld in het "
-"hoofdvenster van Printerdrake. Als uw CUPS-server zich niet bevindt in uw "
-"lokale netwerk, dan geeft u het IP-adres van de CUPS-server in en optioneel "
-"het poortnummer om de printerinformatie van de server op te vragen. In "
-"andere gevallen laat u deze velden leeg."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normaal gesproken wordt CUPS automatisch geconfigureerd aan de hand van uw "
-"netwerkomgeving, zodat u toegang heeft tot de printers op de CUPS-servers in "
-"uw lokale netwerk. In het geval dat dit niet goed werkt, zet dan "
-"\"Automatische CUPS configuratie\" uit en bewerk uw /etc/cups/cupsd.conf "
-"bestand handmatig. Vergeet u niet daarna CUPS te herstarten (opdracht: "
-"\"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Het IP-adres zou er uit moeten zien als 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Het poortnummer moet een geheel getal zijn!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-server IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Poort"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatische CUPS-configuratie"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Bezig met het zoeken van apparaten..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Poorten testen"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Printer toevoegen"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Welkom bij de Printer Instellingen Wizard\n"
-"\n"
-"Deze wizard laat u lokale- of afstand-printers installeren die vanaf deze of "
-"andere computers in het netwerk gebruikt gaan worden.\n"
-"\n"
-"Het zal u vragen naar alle benodigde informatie om de printer in te stellen "
-"en geeft u toegang tot alle beschikbare printer-stuurprogramma's, "
-"stuurprogramma-opties en printerverbindingtypes."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokale printer"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Welkom bij de Printer Instellingen Wizard\n"
-"\n"
-"Deze wizard helpt u bij het installren van uw printer(s) verbonden aan deze "
-"computer.\n"
-"\n"
-"Gelieve uw printer(s) in deze computer te pluggen en aan te zetten. Klik op "
-"\"Volgende\" wanneer u klaar bent, en op \"Annuleren\" wanneer u niet op dit "
-"moment uw printer(s) wilt instellen.\n"
-"\n"
-"Merk op dat sommige computers kunnen vastlopen gedurende de automatische "
-"bespeuring van de printer. Schakel \"Automatisch bespeuren van printer(s)\" "
-"uit om een printerinstallatie uit te voeren zonder automatische bespeuring. "
-"Gebruik de \"Expert-modus\" van Printerdrake indien u een printer-op-afstand "
-"wilt instellen die niet automatisch door Printerdrake getoond wordt."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Automatisch bespeuren van printers"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Gefeliciteerd, uw printer is nu ge�nstalleerd en geconfigureerd!\n"
-"\n"
-"U kunt afdrukken met de \"Afdrukken\"-opdracht in uw toepassingen (normaal "
-"gesproken in het \"Bestand\"-menu).\n"
-"\n"
-"Indien u een printer wilt toevoegen, verwijderen of hernoemen, of indien u "
-"de standaard instellingen wilt wijzigen (papierinvoer-tray, "
-"afdrukkwaliteit, ...), selecteert u dan \"Printer\" in het \"Hardware\"-"
-"gedeelte van het Mandrake Controle Centrum."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatisch bespeuren van printers"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake is in staat om de parallelle- en USB-printers die aan uw "
-"computer verbonden zijn, automatisch te bespeuren. Let u echter op dat op "
-"sommige systemen de automatische bespeuring UW MACHINE KAN LATEN VASTLOPEN. "
-"DIT KAN LEIDEN TOT BESCHADIGING VAN BESTANDSSYSTEMEN! Dus doe dit OP EIGEN "
-"RISICO!\n"
-"\n"
-"Weet u zeker dat u uw printers automatisch wilt laten bespeuren?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Bespeur automatisch"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Handmatig printer instellen"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "%s bespeurd"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Printer op parallelle poort \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB printer \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Geen lokale printer gevonden! Om met de hand een printer te installeren, "
-"voert u een apparaat- of bestandsnaam in op de invoerregel. (Parallelle "
-"poorten: /dev/lp0, /dev/lp1, ..., equivalent aan LPT1:,LPT2:, ..., 1ste USB "
-"printer: /dev/usb/lp0, 2de USB printer: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "U dient een apparaat  of bestandsnaam in te voeren!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Geen lokale printer gevonden!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Netwerkprinters kunnen alleen na de installatie worden ingesteld. Kies "
-"\"Hardware\" en daarna \"Printer\" in het Mandrake Controlecentrum."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Om netwerkprinters te installeren, klikt u op \"Annuleren\", schakel over "
-"naar \"Expert modus\" en klik opnieuw op \"Nieuwe printer toevoegen\"."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"De volgende printer is bespeurd. Is dit niet degene die u wilt configureren, "
-"geef dan een apparaatnaam/bestandsnaam op de invoerregel"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Dit is een lijst van alle automatisch bespeurde printers. Kiest u de printer "
-"om in te stellen of geef een apparaatnaam/bestandsnaam op de invoerregel"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"De volgende printer is automatisch bespeurd. De configuratie van de printer "
-"zal volledig automatisch gaan. Indien uw printer niet correct bespeurd wordt "
-"of indien u liever een aangepaste printerconfiguratie wilt, zet dan "
-"\"Handmatige configuratie\" aan."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Dit is een lijst van alle automatisch bespeurde printers. Kiest u de printer "
-"die u wenst in te stellen. De configuratie van de printer zal volledig "
-"automatisch gaan. Indien uw printer niet correct bespeurd wordt of indien u "
-"een aangepaste printerconfiguratie wenst, zet dan \"Handmatige configuratie"
-"\" aan."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Kiest u de poort waaraan uw printer is verbonden of geef een apparaatnaam/"
-"bestandsnaam op de invoerregel"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Kiest u de poort waaraan uw printer is verbonden."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Parallelle poorten: /dev/lp0, /dev/lp1, ..., equivalent aan LPT1:,"
-"LPT2:, ..., 1ste USB printer: /dev/usb/lp0, 2de USB printer: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "U dient een printer of apparaat te kiezen/in te voeren!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Handmatige configuratie"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Is uw printer een multi-functioneel apparaat van HP (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 met scanner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Bezig met installeren van HPOJ pakket..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Bezig met nagaan en configureren van apparaat HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Bezig met installeren van SANE pakket..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Scannen op uw HP multi-functioneel apparaat"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Bezig met beschikbaar maken van printerpoort voor CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Bezig met lezen van printer-database..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "lpd op afstand - Printer-opties"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Om een lpd-printer op afstand te gebruiken, dient u de hostnaam van de "
-"printerserver en de printernaam op die server in te voeren."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Naam van host op afstand:"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Naam van printer op afstand"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "De naam van de host op afstand is afwezig!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "De naam van de printer op afstand is afwezig!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Printer-opties"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Om naar een SMB-printer af te drukken, dient u de SMB hostnaam (deze kan "
-"verschillen van de TCP/IP hostnaam) in te geven en mogelijk het IP-adres van "
-"de printserver, alsook de naam van de gedeelde printer waar u toegang tot "
-"wenst en, indien nodig, informatie over gebruikersnaam, wachtwoord en "
-"werkgroep."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB-server host"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB-server IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Sharenaam"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Werkgroep"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Ofwel de servernaam ofwel het IP van de server moet ingevoerd worden!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Naam van Samba-share is afwezig!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare Printer-Opties"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Op naar een NetWare-printer af te drukken, dient u de NetWare Printer "
-"servernaam op te geven (deze kan verschillen van de TCP/IP hostnaam!) alsook "
-"de naam van de printerwachtrij waar u toegang tot wilt en, indien nodig, een "
-"gebruikersnaam en wachtwoord."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printer Server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Naam van de printerwachtrij"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP-servernaam is afwezig!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP-wachtrijnaam is afwezig!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket Printer opties"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Om naar een TCP- of socketprinter af te drukken, dient u de hostnaam van de "
-"printer en zonodig het poortnummer op te geven. Op HP JetDirect-servers is "
-"het poortnummer over het algemeen 9100, op andere servers kan het vari�ren. "
-"U zij verwezen naar het handboek van uw hardware."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Printer hostnaam"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Printer hostnaam is afwezig!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Printerapparaat URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"U kunt de URI om de printer aan te spreken direct opgeven. De URI moet\n"
-"voldoen aan ofwel de CUPS-, ofwel de Foomatic specificaties. Let op dat\n"
-"niet alle URI-typen door alle \"spoolers\" ondersteund worden."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Een geldige URI moet worden ingevoerd!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Elke printer heeft een naam nodig (bijvoorbeeld \"printer\"). De "
-"Beschrijving- en Locatie-velden behoeven niet te worden ingevuld. Dit zijn "
-"opmerkingen voor de gebruikers."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Naam van de printer"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Beschrijving"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Locatie"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Bezig met voorbereiden van printer-database..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Uw printermodel"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake heeft de modelnaam die resulteerde uit de automatische "
-"bespeuring vergeleken met de modellen in de printer-database om de beste "
-"overeenkomst te vinden. Deze keuze kan onjuist zijn, in het bijzonder "
-"wanneer uw printer in het geheel niet in de database is opgenomen. Ga dus na "
-"of de keuze juist is en klik \"Het model is juist\" als dit het geval is en "
-"zoniet klikt u \"Handmatig model selecteren\" zodat u uw printermodel "
-"handmatig kunt kiezen op het volgende scherm.\n"
-"\n"
-"Voor uw printer heeft Printerdrake gevonden:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Het model is juist"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Handmatig model selecteren"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Selectie van printer-model"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Welk model printer heeft u?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Gaat u na of Printerdrake het automatisch bespeuren van uw model printer "
-"correct heeft uitgevoerd. Zoek het juiste model in de lijst indien de "
-"selectie staat op een onjuist model, of op \"Raw printer\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Indien uw printer niet getoond wordt, kies dan een compatibel model (zie uw "
-"printerhandleiding) of ��n die er op lijkt."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter-configuratie"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"U configureert nu een OKI laser winprinter. Deze printers\n"
-"gebruiken een erg speciaal communicatieprotocol en daarom werken ze alleen "
-"indien verbonden met de eerste parallelle poort. Als uw printer verbonden is "
-"aan een andere poort of aan een printserver, verbindt u dan de printer aan "
-"de eerste parallelle poort voordat u een testpagina afdrukt, anders zal de "
-"printer niet werken. De instelling van het verbindingstype wordt door het "
-"stuurprogramma genegeerd."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet-configuratie"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"De inkjet-printerstuurprogramma's die door Lexmark worden verstrekt "
-"ondersteunen alleen lokale printers, en geen printers-op-afstand of "
-"printservers. Gelieve uw printer aan een lokale poort te verbinden of hem te "
-"configureren op de machine waaraan hij is verbonden."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Om met uw Lexmark inkjet en deze configuratie te kunnen afdrukken, heeft u "
-"de inkjet-printerstuurprogramma's nodig die door Lexmark (http://www.lexmark."
-"nl/) ter beschikking gesteld worden. Ga naar deze webpagina en klik op de "
-"\"Drivers\"-knop. Kies vervolgens \"Printer drivers\", uw model en daarna "
-"\"Linux\" als besturingssysteem. De stuurprogramma's komen in de vorm van "
-"RPM-pakketten of shell-scripts met interactieve grafische installatie. Het "
-"is niet nodig om deze configuratie met de grafische schillen te doen. "
-"Annuleer direct na de licentie-overeenkomst. Druk dan printkop-"
-"uitlijningpagina's af met \"lexmarkmaintain\" en pas de "
-"kopuitlijningsinstellingen aan met dit programma."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Printer standaard-instellingen\n"
-"\n"
-"Zorgt u ervoor dat de paginagrootte en de inktsoort/afdrukmodus (indien "
-"beschikbaar), alsmede de hardware-configuratie van laserprinters (geheugen, "
-"duplex-eenheid, extra trays) juist ingesteld zijn. Let op dat een zeer hoge "
-"printkwaliteit het afdrukken behoorlijk kan vertragen."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Optie %s moet een geheel getal zijn!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Optie %s moet een getal zijn!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Optie %s valt buiten het bereik!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Wenst u deze printer (\"%s\")\n"
-"als standaard printer in te stellen?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Test-pagina's"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Selecteert u de test-pagina's die u af wenst te drukken.\n"
-"Let op: het kan een nogal lange tijd in beslag nemen voordat de foto-test-"
-"pagina is afgedrukt en op laserprinters met onvoldoende geheugen wordt deze "
-"wellicht helemaal niet afgedrukt. In de meeste gevallen is het voldoende om "
-"de standaard test-pagina af te drukken."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Geen test-pagina's"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Afdrukken"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standaard testpagina"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternatieve test-pagina (Letter-formaat)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternatieve test-pagina (A4-formaat)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Foto-testpagina"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Druk geen enkele testpagina af"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Bezig met afdrukken van testpagina(s)..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testpagina('s) werd(en) naar de printer gestuurd.\n"
-"Het kan even duren voordat het eigenlijke afdrukken begint.\n"
-"Print-status:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testpagina's) werd(en) naar de printer gestuurd.\n"
-"Het kan even duren voordat het eigenlijke afdrukken begint.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Werkt het afdrukken naar behoren?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Kale ('raw') printer"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Om een bestand vanaf de commandoregel (terminalvenster) af te drukken, "
-"gebruikt u ofwel het commando \"%s  <bestand>\", ofwel een grafisch "
-"printerhulpprogramma: \"xpp <bestand>\" of \"kprinter <bestand>\". Deze "
-"grafische hulpprogramma's stellen u in staat om de printer te kiezen en "
-"gemakkelijk de opties te wijzigen.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Deze commando's kunt u ook invullen in het \"Print-commando\"-veld van "
-"printdialogen van veel applicaties. Maar vul daar dan geen bestandsnaam in "
-"omdat het af te drukken bestand wordt geleverd door de applicatie.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"De \"%s\"-opdracht geeft ook de mogelijkheid tot het wijzigen van de opties "
-"voor een specifieke printtaak. Voeg de gewenste instellingen eenvoudigweg "
-"toe aan de commandoregel, bijvoorbeeld \"%s <bestand>\"."
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Om de beschikbare opties voor de huidige printer te weten te komen, kunt u "
-"ofwel de lijsthieronder lezen, ofwel klikken op de knop \"Lijst van print-"
-"opties\".%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Dit is een lijst van de beschikbare opties voor de huidige printer:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Om een bestand vanaf de commandoregel (terminalvenster) af te drukken, \n"
-"gebruikt u het commando \"%s <bestand>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Dit commando kunt u ook invullen in het \"Print-commando\"-veld van "
-"printdialogen van veel applicaties. Maar vul daar dan geen bestandsnaam in "
-"omdat het af te drukken bestand wordt geleverd door de applicatie. \n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Om een lijst te verkrijgen van alle beschikbare opties voor de huidige "
-"printer, klikt u op de knop \"Lijst van print-opties\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Om een bestand vanaf de commandoregel (terminalvenster) af te drukken, \n"
-"gebruikt u het commando \"%s <bestand>\" of \"%s <bestand>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Wanneer u KDE als bureau-omgeving gebruikt dan heeft u de beschikking over "
-"een \"paniek-knop\", een pictogram op het bureaublad, met daarop de tekst "
-"\"STOP Printer!\", welke onmiddelijk alle printtaken stopt wanneer u er op "
-"klikt. Dit is handig bijvoorbeeld in het geval van papierstoringen.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"De \"%s\"- en \"%s\"-opdrachten geven ook de mogelijkheid tot het wijzigen "
-"van de opties voor een specifieke printtaak. Voeg de gewenste instellingen "
-"eenvoudigweg toe aan de commandoregel, bijvoorbeeld \"%s <bestand>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Sluiten"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Bezig met afdrukken/scannen op \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Bezig met afdrukken op printer \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Lijst van print-opties"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Uw HP multifunctioneel apparaat is automatisch geconfigureerd om te kunnen "
-"scannen. U kunt nu scannen met \"scanimage\" (\"scanimage -d hp:%s\" om de "
-"scanner te specificeren als u er meer dan ��n heeft) vanaf de commandoregel "
-"of met behulp van de grafische interfaces \"xscanimage\" of \"xsane\". "
-"Indien u gebruik maakt van The GIMP, kunt u ook scannen door het juiste punt "
-"te kiezen in het \"Bestand\"/\"Importeren\"-menu. U kunt ook \"man scanimage"
-"\" en \"man sane-hp\" aanroepen vanaf de commandoregel om meer informatie te "
-"krijgen.\n"
-"\n"
-"Gebruik voor dit apparaat geen \"scannerdrake\"!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Uw HP multifunctioneel apparaat is automatisch geconfigureerd om te kunnen "
-"scannen. U kunt nu scannen vanaf de commandoregel met \"ptal-hp %s scan ..."
-"\". Scannen via een grafische interface of vanuit The GIMP is nog niet "
-"ondersteund voor uw apparaat. U vindt meer informatie in het bestand \"/usr/"
-"share/doc/hpoj-0.8/ptal-hp-scan.html\" op uw systeem. Als u een HP LaserJet "
-"1100 of 1200 heeft kunt u alleen scannen indien u de scanner-optie "
-"ge�nstalleerd heeft.\n"
-"\n"
-"Gebruik voor dit apparaat geen \"scannerdrake\"!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Bezig met lezen van printer-informatie..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Printer-configuratie overzetten"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"U kunt de printerconfiguratie die u voor spooler %s uitgevoerd heeft, "
-"kopi�ren naar %s, uw huidige spooler. Alle configuratiegegevens "
-"(printernaam, beschrijving, locatie, verbindingssoort, en standaard opties) "
-"worden dan overgenomen, maar printtaken zullen niet worden overgezet.\n"
-"Niet alle wachtrijen kunnen worden overgezet, vanwege de volgende redenen:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ondersteunt geen printers op Novell-servers of printers die gegevens in "
-"een vrije vorm-opdracht versturen.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ondersteunt alleen printers aan deze computer, LPD printers op afstand, "
-"en Socket/TCP printers.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD en LPRng ondersteunen geen IPP printers.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Daarbij komt dat wachtrijen die niet met dit programma of met \"foomatic-"
-"configure\" zijn aangemaakt, niet kunnen worden overgezet."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Ook printers geconfigureerd met door hun fabrikant geleverde PPD-bestanden, "
-"of met eigen CUPS drivers, kunnen niet worden overgezet."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Markeer de printers die u wilt overzetten en klik \n"
-"\"Overzetten\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "De printers niet overzetten"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Overzetten"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Een printer met de naam \"%s\" bestaat al onder %s. \n"
-"Klik op \"Overzetten\" om deze te overschrijven.\n"
-"U kunt ook een nieuwe naam ingeven of deze printer overslaan."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Een printernaam mag alleen letters, getallen en een laag liggend streepje "
-"bevatten"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"De printer \"%s\" bestaat reeds, \n"
-"weet u zeker dat u de configuratie ervan wilt overschrijven?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nieuwe printernaam"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Bezig met overzetten van %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"U heeft uw vorige standaardprinter (\"%s\") overgezet. Moet dit ook de "
-"standaardprinter worden in het nieuwe printsysteem %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Bezig met verversen van printergegevens..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Printer-op-afstand configureren"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Bezig met inschakelen van het netwerk..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Configureer het netwerk nu"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Netwerk-functionaliteit niet geconfigureerd"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"U staat op het punt een printer-op-afstand te configureren. Hiervoor is een "
-"werkende netwerktoegang vereist, maar uw netwerk is nog niet geconfigureerd. "
-"Als u verder wilt gaan zonder netwerkconfiguratie, zult u niet in staat zijn "
-"om de printer te gebruiken die u nu configureert. Hoe wenst u verder te gaan?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Doorgaan zonder configureren van netwerk"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"De netwerk-configuratie die uitgevoerd is tijdens de installatie kan op dit "
-"moment niet worden ingeschakeld. Gaat u na of het netwerk toegankelijk is na "
-"het opnieuwopstarten van uw systeem. De configuratie is te corrigeren met "
-"het Mandrake Controle Centrum, onderdeel \"Netwerk & Internet\"/\"Verbinding"
-"\". Daarna kunt u de \n"
-"printer instellen, ook met het Mandrake Control Center, onderdeel \"Hardware"
-"\"/\"Printer\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"De netwerktoegang was nog niet actief en kon ook niet worden ingeschakeld. "
-"Gelieve uw configuratie en uw hardware na te kijken. Probeert u daarna "
-"opnieuw uw printer-op-afstand te configureren."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Bezig met herstarten van het printsysteem..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "hoog"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "parano�de"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-"Bezig met installeren van een printsysteem in het %s beveiligingsniveau"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"U staat op het punt om printsysteem %s te installeren op een systeem dat op "
-"beveiligingsniveau %s draait.\n"
-"\n"
-"Dit printsysteem draait een daemon (achtergrondproces) welke wacht op een "
-"taak en deze afhandelt. Deze daemon is ook toegankelijk voor computers op "
-"afstand over het netwerk en dus is het een mogelijk doelwit voor aanvallen. "
-"Daarom worden er normaal gesproken slechts enkele geselecteerde daemons "
-"gestart op dit beveiligingsniveau.\n"
-"\n"
-"Weet u zeker dat u het afdrukken wilt configureren op deze computer?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Het printsysteem zal bij het opstarten worden ingeschakeld"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Het printsysteem (%s) zal niet automatisch worden ingeschakeld wanneer de "
-"computer wordt opgestart.\n"
-"\n"
-"Mogelijkerwijs is het automatisch inschakelen uitgezet door het omschakelen "
-"naar een hoger beveiligingsniveau, omdat het printsysteem een mogelijk "
-"doelwit is voor aanvallen.\n"
-"\n"
-"Wilt u dat het automatisch inschakelen van het printsysteem weer wordt "
-"aangezet?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Bezig met nagaan welke software ge�nstalleerd is..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Bezig met verwijderen van LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Bezig met verwijderen van LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Selecteer printer-spooler"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Welk printsysteem (\"spooler\")  wilt u gebruiken?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Bezig met configureren van printer \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Bezig met installeren van Foomatic..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Printer-opties"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Bezig met het voorbereiden van PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Bezig met configureren van toepassingen ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Wenst u een printer in te stellen?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Printsysteem:"
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"De volgende printers zijn geconfigureerd. Dubbelklik op een printer om zijn "
-"instellingen te wijzigen; om hem als standaardprinter in te stellen; om "
-"informatie erover te bekijken; of om een printer op een CUPS-server op "
-"afstand ter beschikking te stellen in Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"De volgende printers zijn geconfigureerd. Dubbelklik op ��n ervan om zijn "
-"instellingen te wijzigen; hem als standaardprinter in te stellen; of om "
-"informatie erover te bekijken."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Printerlijst verversen (om alle CUPS printers-op-afstand zichtbaar te maken)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Wijzig het printsysteem"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normale modus"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Wenst u een andere printer te configureren?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Printerconfiguratie aanpassen"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Printer %s\n"
-"Wat wilt u aanpassen aan deze printer?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Doe het!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Soort printerverbinding"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Printernaam, beschrijving, locatie"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Printerfabrikant, model, aansturingsprogramma"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Printerfabrikant, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Stel deze printer in als standaardprinter"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Deze printer aan Star Office/OpenOffice.org toevoegen"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Deze printer verwijderen uit Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Druk testpagina('s) af"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Weet hoe deze printer kan worden gebruikt"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Printer verwijderen"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Bezig met verwijderen van oude printer \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Standaard printer"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "De \"%s\"-printer is nu ingesteld als de standaardprinter."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Bezig met toevoegen van printer aan Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"De printer \"%s\" is niet succesvol aan Star Office/OpenOffice.org "
-"toegevoegd."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-"Het toevoegen van de printer \"%s\" aan Star Office/OpenOffice.org is "
-"mislukt."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Bezig met verwijderen van printer uit Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"De printer \"%s\" is succesvol uit Star Office/OpenOffice.org verwijderd."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-"Het verwijderen van de printer \"%s\" uit Star Office/OpenOffice.org is "
-"mislukt."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Weet u zeker dat u de printer \"%s\" wilt verwijderen?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Bezig met verwijderen van printer \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configuratie van proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Welkom bij de proxy-configuratie.\n"
-"\n"
-"Hier kunt u uw http en ftp proxy's opgeven, al dan niet\n"
-"met loginnaam en wachtwoord\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Gelieve de http proxy-informatie in te vullen.\n"
-"Laat het leeg in het geval u geen http proxy wenst."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "poort"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Proxy moet beginnen met http:"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Het poort-gedeelte moet numeriek zijn"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Gelieve de ftp-proxy informatie\n"
-"in te vullen. Laat het leeg als u geen ftp proxy wenst"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL moet beginnen met ftp:"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Voer alstublieft de proxy loginnaam en wachtwoord\n"
-"in, als deze er zijn. In andere gevallen laat u dit leeg."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "loginnaam"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "wachtwoord"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Voer wachtwoord opnieuw in"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "De wachtwoorden kloppen niet met elkaar. Probeert u het opnieuw!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan geen partitie toevoegen aan een _geformatteerde_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan niet schrijven naar bestand %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid-fout!"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid-fout! (misschien ontbreken de raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Niet genoeg partities voor RAID-niveau %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Start het ALSA (Advanced Linux Sound Architecture) geluidssysteem"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, een periodieke commando-planner."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd is gebruikt voor het controleren van de batterijstatus en om dit te "
-"loggen via syslog.\n"
-"Het kan ook gebruikt worden om de machine uit te schakelen als het "
-"spanningsniveau van de batterij laag is."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Start commando's die door het at commando gepland zijn op het moment dat\n"
-"werd opgegeven als at werd gestart, en draait batch-commando's wanneer het "
-"load-average laag genoeg is."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron is een standaard UNIX-programma dat door de gebruiker gespecificeerde "
-"programma's start\n"
-"op periodiek geplande tijden. vixie cron voegt een aantal 'features' toe "
-"aande basis UNIX-cron,\n"
-"waaronder betere veiligheid en krachtigere configuratieopties."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM voegt muisondersteuning toe aan text-based Linux-toepassingen zoals de\n"
-"Midnight Commander. Het laat ook mouse-based console knippen-en-plakken "
-"toe,\n"
-"en biedt ook ondersteuning voor pop-up menu's op de console."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake draait als een hardware-sonde, en eventueel \n"
-"configureert het nieuwe of veranderde hardware."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache is een World Wide Web-server. Het wordt gebruikt om HTML-bestanden en "
-"CGI aan te bieden."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"De internet superserver daemon (meestal inetd genoemd) start een hele\n"
-"hoop andere internetdiensten wanneer nodig. Het is verantwoordelijk voor\n"
-"vele diensten, waaronder telnet, ftp, rsh en rlogin. Als u inetd "
-"uitschakelt,\n"
-"schakelt u alle diensten uit waar de daemon verantwoordelijk voor is."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pakket-filtering inschakelen voor Linux kernel 2.2-serie, om \n"
-"een firewall op te zetten die uw machine beschermt tegen \n"
-"aanvallen vanuit het netwerk."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Dit pakket laadt de geselecteerde toetsenbord-layout als ingesteld in\n"
-"/etc/sysconfig/keyboard. Dit kan geselecteerd worden via de kbdconfig "
-"utility.\n"
-"U laat dit best aanstaan voor de meeste machines."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatisch opnieuw aanmaken van kernel header in \n"
-"/boot voor /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatisch vinden en configureren van hardware bij het opstarten"
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf zal op sommige momenten regelen dat diverse \n"
-"taken worden uitgevoerd bij het opstarten, om de systeem-\n"
-"configuratie te behouden."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd is de print-daemon, die nodig is om lpr goed te laten werken. Het is\n"
-"voornamelijk een server die print-jobs naar printers stuurt en regelt."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, gebruikt om een hoge-prestatie en hoge-\n"
-"beschikbaarheid server te bouwen."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) is een Domain Name Server (DNS) die wordt gebruikt om hostnamen "
-"naar IP-adressen om te zetten."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"(Ont)koppelt alle Network File System (NFS), SMB (Lan Manager/Windows)\n"
-"en NCP (NetWare) koppelpunten."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activeert/Deactiveert alle netwerk-interfaces die geconfigureerd zijn\n"
-"om bij het opstarten ingeschakeld te worden."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS is een populair protocol voor bestandsdeling over TCP/IP-netwerken.\n"
-"Deze dienst geeft u NFS-serverfunctionaliteit, die dan wordt geregeld via "
-"het\n"
-"bestand /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS is een populair protocol voor bestandsdeling over TCP/IP-netwerken.\n"
-"Deze dienst geeft u NFS-bestands'locking'-functionaliteit."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatisch aanzetten van de numlock-toets onder \n"
-"commandovensters en XFree bij het opstarten."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ondersteun de OKI 4w en compatibele winprinters"
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA-ondersteuning dient meestal om ethernet en modems in laptops te "
-"onder-\n"
-"steunen. Het zal niet gestart worden tenzij het geconfigureerd is, dus het "
-"is\n"
-"veilig om het ge�nstalleerd te hebben op machines die het niet nodig hebben."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"De portmapper beheert RPC-verbindingen, die gebruikt worden door protocols\n"
-"zoals NFS en NIS. De portmap-server moet draaien op machines die fungeren\n"
-"als servers voor protocols die het RPC-mechanisme gebruiken."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix is een Mail Transport Agent, een programma dat post verplaatst van "
-"de ene machine naar de andere."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Bewaart en herstelt de systeem-entropy pool voor betere generatie\n"
-"van willekeurige cijfers."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Wijs rauwe apparaten toe aan blok-geori�nteerde apparaten \n"
-"(zoals partities op een harde schijf), voor het gebruik van \n"
-"applicaties zoals Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"De routed daemon laat automatische IP-router-tabel updates toe via het RIP-\n"
-"protocol. RIP is vooral gebruikt op kleine netwerken, complexere routing-\n"
-"protocols zijn nodig voor complexere netwerken."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Het rstat-protocol laat gebruikers op een netwerk de prestatie-cijfers\n"
-"voor elke machine op dat netwerk op te vragen."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Het rusers-protocol laat gebruikers op een netwerk toe om de kijken wie er\n"
-"ingelogd is op de andere machines op dat netwerk."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Het rwho-protocol laat gebruikers op afstand een lijst opvragen van alle\n"
-"gebruikers die op een machine ingelogd zijn die de rwho daemon draait.\n"
-"(vergelijkbaar met finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Schakel het geluidssysteem van uw machine in"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog is de manier die vele daemons gebruiken om boodschappen te loggen "
-"naar\n"
-"verscheidene systeem-logbestanden. Het is een goed idee syslog altijd te "
-"draaien."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Laad de stuurprogramma's voor uw USB-apparaten"
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Start de X Font Server (deze is noodzakelijk voor het draaien\n"
-"van XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Selecteer welke diensten automatisch gestart moeten worden bij het opstarten"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Afdrukken"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Bestanden delen"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Systeem"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Beheer op afstand"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Database-server"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Diensten: %d geactiveerd van %d geregistreerd"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Diensten"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "actief"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "gestopt"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Diensten en daemons"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Geen extra informatie over\n"
-"deze dienst beschikbaar, sorry."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Bij opstarten"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stoppen"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Bedankt dat u voor Mandrake Linux 8.2 gekozen hebt"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Welkom in de Open Source-wereld"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Het succes van MandrakeSoft is gebaseerd op het principe van Vrije Software. "
-"Uw nieuwe besturingssysteem is het resultaat van het gezamenlijke werk van "
-"de wereldwijde Linux-gemeenschap."
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Doe mee met de wereld van Vrije Software"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Leer de Open Source-gemeenschap kennen en word er deelgenoot van. Leer, "
-"doceer en help anderen door u aan te sluiten bij de vele discussiefora die u "
-"vindt op onze \"Community\"-webpagina's"
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet en Berichten"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 biedt de software om toegang te krijgen tot alles wat het "
-"Internet te bieden heeft: Surf over het web en bekijk animaties met Mozilla "
-"en Konqueror, wissel e-mail uit & beheer uw persoonlijke informatie met "
-"Evolution en Kmail, en veel meer"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia en Grafisch"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 laat u uw multimedia-computer tot aan zijn grenzen "
-"drijven! Gebruik de allernieuwste software om muziek- en audiobestanden af "
-"te spelen, uw plaatjes en foto's te bewerken en te beheren, TV en video's te "
-"kijken en veel meer"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Ontwikkeling"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 is het ultieme ontwikkelplatform. Ontdek de kracht van de "
-"GNU gcc compiler naast de beste Open Source ontwikkelomgevingen"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Controlecentrum"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Het Mandrake Linux 8.2 Controlecentrum is een alles-in-��n-plek om uw "
-"Mandrake-systeem volledig aan te passen en te configureren"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Gebruiker-interfaces"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 biedt 11 verschillende grafische werkplek-omgevingen en "
-"window managers waaruit u kunt kiezen, waaronder GNOME 1.4, KDE 2.2.2, "
-"Window Maker 0.8 en de rest"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Server software"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Transformeer uw computer naar een krachtige server met slechts enkele "
-"muisklikken: Web server, e-mail, firewall, router, file- en printserver, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Spelletjes"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 biedt het beste in Open Source games - arcade, actie, "
-"kaarten, sporten, strategie, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Wilt u Linux leren op een eenvoudige, snelle en gratis manier? MandrakeSoft "
-"biedt gratis Linux-training, naast een manier om uw voortgang te testen, op "
-"MandrakeCampus -- ons online trainingscentrum"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Kwaliteits-ondersteuning vanuit de Linux-gemeenschap, en van MandrakeSoft, "
-"is om de hoek! En indien u al een Linux-veteraan bent, word een \"Expert\" "
-"en deel uw kennis op onze ondersteuningswebpagina"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Voor al uw IT-projecten staan onze consultants klaar om te analyseren wat u "
-"nodig heeft en een aangepaste oplossing te bieden. Profiteer van "
-"MandrakeSoft's enorme ervaring als Linux-producent voor een waar IT-"
-"alternatief voor uw bedrijfsorganisatie"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Ons volledige scala aan Linux-oplossingen, naast speciale aanbiedingen voor "
-"onze produkten en 'goodies', is beschikbaar op onze e-store"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Voor meer informatie over MandrakeSoft's Professional Services en "
-"commerci�le produkten, zie de volgende webpagina:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Bezig met installeren van pakketten..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ik kan uw partitietabel niet lezen, ze is te corrupt voor mij :-(\n"
-"Ik zal proberen door te gaan en de slechte partities te verwijderen"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Fout!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ik kan het benodigde beeld-bestand `%s' niet vinden."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Configuratieprograma voor auto-installatie"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"U staat op het punt om een auto-installatie diskette te configureren. \n"
-"Deze functie is enigszins risicovol en moet met voorzorg gebruikt worden.\n"
-"\n"
-"Met die functie zult u in staat zijn de installatie die u heeft uitgevoerd "
-"op deze computer te herhalen. Daarbij worden u bij enkele stappen vragen "
-"gesteld, om de bijbehorende waarden aan te passen.\n"
-"\n"
-"Voor een maximale graad van veiligheid, zal het partitioneren en formatteren "
-"nooit automatisch uitgevoerd worden, ongeacht wat u gekozen heeft gedurende "
-"de installatie van deze computer.\n"
-"\n"
-"Wenst u door te gaan?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Configuratie van automatische stappen"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Kiest u alstublieft voor elke stap of deze zich zal herhalen zoals bij uw "
-"installatie, of dat deze handmatig zal zijn"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Welkom.\n"
-"\n"
-"De parameters van de auto-installatie zijn aanwezig in de afdelingen aan de "
-"linkerkant"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gefeliciteerd!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"De diskette is met succes aangemaakt.\n"
-"U kunt nu uw installatie herhalen."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Auto-installatie"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Item toevoegen"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Het laatste item verwijderen"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Rapport \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Daemon Rapport\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Rapport Details\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "totale voortgang"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Reservekopie maken van systeembestanden..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Harde schijf reservekopie..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Reservekopie gebruikersbestanden..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Voortgang reservekopie harde schijf..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Reservekopie andere bestanden..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"bestandslijst via FTP verzonden: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Er is een probleem opgetreden met de FTP-verbinding. Het is niet "
-"mogelijk om uw reservekopie-bestanden per FTP te verzenden.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Er is een fout opgetreden tijdens het versturen van e-mail.\n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Bestandsselectie"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Selecteer de bestanden of mappen en klik op 'Toevoegen'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Gelieve alle opties te selecteren die u nodig heeft.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Deze opties kunnen een reservekopie maken van alle bestanden in uw /etc "
-"map.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Reservekopie maken van uw systeembestanden ( /etc map )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-"Gebruik incrementele reservekopie (de oude reservekopie�n niet vervangen)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Essenti�le bestanden niet opnemen (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr "Met deze optie kunt u iedere versie van uw /etc herstellen."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Gelieve alle gebruikers te selecteren die u in uw reservekopie wilt opnemen."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Browser-cache niet opnemen"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Gebruik incrementele reservekopie�n (vervang geen oude reservekopie�n)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Verwijder geselecteerden"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32) "
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Gebruikers"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Gebruik FTP-verbinding voor reservekopie"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Gelieve hostnaam of IP in te voeren."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Gelieve de map op deze host \n"
-" om de reservekopie in op te slaan\n"
-" in te voeren."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Voer uw login in"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Voer uw wachtwoord in"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Onthoud dit wachtwoord"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP-verbinding"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Beveiligde verbinding"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Gebruik CD/DVD-ROM voor reservekopie"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Kies uw CD-ruimte"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Ga na of u CDRW-media gebruikt"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Gelieve na te gaan of u uw CDRW wilt wissen voor u verdergaat"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Ga na of u de installatie-opstartprocedure\n"
-" wilt opnemen op uw CD."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Voer het apparaatnaam van uw CD Writer in\n"
-" Voorbeeld: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Gebruik tape voor backup"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Voer de apparaatnaam in om voor de reservekopie te gebruiken"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Voer de maximumruimte in die\n"
-" Drakbackup mag gebruiken"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Voer de map voor opslaan in:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Gebruik quota voor reservekopie-bestanden"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Netwerk"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Harde schijf / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "ieder uur"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "dagelijks"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "wekelijks"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "maandelijks"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Gebruik daemon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Gelieve het tijdsinterval \n"
-"tussen iedere backup te kiezen"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Kies de media\n"
-"voor de reservekopie."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Harde schijf met daemon gebruiken"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "FTP met daemon gebruiken"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Let u op dat de cron daemon aanstaat in uw 'diensten'."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Verstuur e-mailrapport na elke reservekopie naar:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Wat"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Waar"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Wanneer"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Meer opties"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup configuratie"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Bepaal waar u de reservekopie wilt maken"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "op harde schijf"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "over netwerk"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Kies waar u een reservekopie van wilt maken"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Reservekopie-systeem"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Reservekopie Gebruikers"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Handmatig gebruiker selecteren"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Reservekopie-bronnen: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Systeembestanden:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Gebruikersbestanden:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Overige bestanden:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Pad voor opslaan op harde schijf: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Host voor opslaan via FTP: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t gebruikersnaam: %s\n"
-"\t\t op pad: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Opties:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tSysteembestanden niet opnemen\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tReservekopie�n gebruiken tar en bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tReservekopie�n gebruiken tar en gzip\n"
-
-# check if this is the right translation, unclear! -Reinout
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Daemon (%s) opnemen: \n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-harde schijf.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Netwerk over FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Netwerk over SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Geen configuratie, gelieve Wizard of Geavanceerd aan te klikken.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lijst van te herstellen gegevens:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lijst van gecorrumpeerde gegevens:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Gelieve het de volgende keer te deselecteren of te verwijderen"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Reservekopiebestanden zijn gecorrumpeerd"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Al uw geselecteerde gegevens zijn"
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          Succesvol hersteld op %s"
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Configuratie herstellen"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK om de overige bestanden te herstellen"
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Te herstellen gebruikerslijst (alleen de meest recente datum per gebruiker "
-"is van belang)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Reservekopie maken van systeembestanden voor:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Gelieve de datum te kiezen om te herstellen"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Gebruik harde schijf voor reservekopie"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Herstellen van harde schijf"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Voer de map in waar reservekopie�n opgeslagen worden"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Selecteer andere media om vanaf te herstellen"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Andere media"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Systeem herstellen"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Gebruikers herstellen"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Overige herstellen"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "selecteer te herstellen pad (in plaats van / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Voer nieuwe backup uit alvorens te herstellen (alleen voor incrementele "
-"reservekopie�n)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Verwijder gebruikersmappen alvorens te herstellen"
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Alle reservekopie�n herstellen"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Aangepast herstellen"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Help"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Vorige"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Opslaan"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Reservekopie maken"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Reservekopie herstellen"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Volgende"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Gelieve eerst een reservekopie te maken voordat u probeert te herstellen...\n"
-" of ga na dat uw pad voor opslaan correct is."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Er trad een fout op tijdens \"sendmail\"\n"
-"  Uw melding is niet verstuurd.\n"
-"  Gelieve sendmail te configureren."
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lijst van te installeren pakketten"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Er trad een fout op tijdens het versturen via FTP.\n"
-" Gelieve uw FTP-configuratie te corrigeren."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Selecteer de gegevens om te herstellen"
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Selecteer media voor de reservekopie"
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Selecteer de gegevens waarvan u een reservekopie wilt maken..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Kan geen configuratiebestand vinden \n"
-"klikt u op Wizard of Geavanceerd."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "In ontwikkeling ... nog even wachten."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Reservekopie maken van systeembestanden"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Reservekopie maken van gebruikersbestanden"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Reservekopie maken van overige bestanden"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Totale voortgang"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "bestanden worden per FTP verstuurd"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Bezig met versturen van bestanden..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Lijst van gegevens om op te nemen op CD-ROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Voer de snelheid van de CD-Writer in"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Gelieve uw CD Writer apparaatnaam in te voeren (Voorbeeld: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Ga na of u de installatie-opstartprocedure wilt opnemen op uw CD."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Nu reservekopie maken vanaf configuratiebestand"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Backup-configuratie bekijken"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Configuratie met wizard"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Geavanceerde configuratie"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Nu reservekopie maken"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Sommige fouten die tijdens sendmail optreden worden\n"
-" veroorzaakt door een verkeerde configuratie van postfix.\n"
-" Om dit op te lossen dient u 'myhostname' of 'mydomain'\n"
-" in te stellen in /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Omschrijving:\n"
-"\n"
-"  Drakbackup dient om een reservekopie te maken van uw systeem.\n"
-"  Gedurende de configuratie kunt u selecteren:\n"
-"\t- Systeembestanden,\n"
-"\t- Gebruikersbestanden,\n"
-"\t- Overige bestanden.\n"
-"\tof uw gehele systeem ... en Overigen (zoals Windows-partities)\n"
-"\n"
-"  Drakbackup laat u een reservekopie maken van uw systeem op:\n"
-"\t- Harde schijf.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (met automatisch opstarten, redding en auto-"
-"installatie).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup laat u uw systeem herstellen naar een\n"
-"  door de gebruiker te bepalen map.\n"
-"\n"
-"  Standaard zullen alle reservekopie�n opgeslagen worden in uw\n"
-"  /var/lib/drakbackup map.\n"
-"\n"
-"  Configuratiebestand:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Herstellen-stap:\n"
-"  \n"
-"  Tijdens de herstellen-stap, zal Drakbackup uw\n"
-"  oorspronkelijke map verwijderen en nagaan dat geen\n"
-"  van uw reservekopie-bestanden corrupt is. Het is\n"
-"  aanbevelenswaardig om een laatste reservekopie te\n"
-"  maken alvorens te herstellen.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"beschrijving van opties:\n"
-"\n"
-"Weest u voorzichtig met het gebruik van FTP-reservekopie,\n"
-"omdat alleen reeds gemaakte reservekopie�n naar de server\n"
-"worden verzonden. Dus op dit moment dient u de reservekopie\n"
-"op uw harde schijf te maken alvorens deze te verzenden naar\n"
-"de server.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problemen bij Reservekopie herstellen:\n"
-"\n"
-"Tijdens de herstellen-stap zal Drakbackup al uw\n"
-"reservekopiebestanden controleren alvorens ze\n"
-"te herstellen. \n"
-"Voordat het herstellen begint zal Drakbackup uw\n"
-"oorspronkelijke map verwijderen. Alle gegevens erin\n"
-"zullen verloren gaan. Het is belangrijk om voorzichtigheid\n"
-"te betrachten en de reservekopiebestanden niet\n"
-"handmatig te wijzigen.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Omschrijving:\n"
-"\n"
-"  Drakbackup dient om een reservekopie te maken van uw systeem.\n"
-"  Gedurende de configuratie kunt u selecteren:\n"
-"\t- Systeembestanden,\n"
-"\t- Gebruikersbestanden,\n"
-"\t- Overige bestanden.\n"
-"\tof uw gehele systeem ... en Overigen (zoals Windows-partities)\n"
-"\n"
-"  Drakbackup laat u een reservekopie maken van uw systeem op:\n"
-"\t- Harde schijf.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (met automatisch opstarten, redding en auto-"
-"installatie).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup laat u uw systeem herstellen naar een\n"
-"  door de gebruiker te bepalen map.\n"
-"\n"
-"  Standaard zullen alle reservekopie�n opgeslagen worden in uw\n"
-"  /var/lib/drakbackup map.\n"
-"\n"
-"  Configuratiebestand:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Herstellen-stap:\n"
-"  \n"
-"  Tijdens de herstellen-stap, zal Drakbackup uw\n"
-"  oorspronkelijke map verwijderen en nagaan dat geen\n"
-"  van uw reservekopie-bestanden corrupt is. Het is\n"
-"  aanbevelenswaardig om een laatste reservekopie te\n"
-"  maken alvorens te herstellen.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "De installatie van %s is niet gelukt. De volgende fout werd gevonden:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Zoek in ge�nstalleerde lettertypen"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Ge�nstalleerde lettertypen deselecteren"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "alle lettertypen ontleden"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "geen lettertypen gevonden."
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "klaar"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "kan geen lettertypen vinden in uw aangekoppelde partities"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Correcte lettertypen opnieuw selecteren"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "kan geen enkel lettertpype vinden.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Zoek lettertypen in lijst 'ge�nstalleerd'"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopi�ren van lettertypen"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installatie van True Type lettertypen"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "Even geduld terwijl 'ttmkfdir' wordt uitgevoerd..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "True Type installatie klaar"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Lettertypen-conversie"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "'type1inst' is bezig"
-
-# right translation? What is meant here?
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript verwijzingen"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf-lettertype conversie"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm-lettertype conversie"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Tijdelijke bestanden onderdrukken"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "XFS herstarten"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Lettertype-bestanden onderdrukken"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs herstarten"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Ga na dat u het recht heeft om lettertypen te installeren op uw systeem en "
-"ze te gebruiken, \n"
-"alvorens lettertypen te installeren.\n"
-"-U kunt de lettertypen op de gebruikelijke manier installeren. In zeldzame "
-"gevallen kunnen\n"
-"nep-lettertypen uw X Server laten hangen."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Import van lettertypen"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Neem Windows-lettertypen"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Lettertypen de�nstalleren"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Geavanceerde opties"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Lettertypenlijst"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Kies de applicaties waarin de lettertypen beschikbaar zullen zijn:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Generieke printers"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Selecteer het lettertypebestand of map en klik op 'Toevoegen'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Installatielijst"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "klik hier als u er zeker van bent."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "hier zoniet."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Alle gedeselecteerd"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Alles geselecteerd"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Lijst verwijderen"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Initialen-tests"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Lettertypen op uw systeem kopi�ren"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Lettertypen installeren & converteren"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Post-installatie"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Lettertypen op uw systeem verwijderen"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Post-de�nstallatie"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Internetverbinding delen"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetverbinding delen staat op dit moment aan"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"De setup van Internet Connectie Delen is al uitgevoerd.\n"
-"Het staat op dit moment aan.\n"
-"\n"
-"Wat wenst u te doen?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "uitschakelen"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "klaar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "herconfigureren"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Bezig met servers uitzetten..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetverbinding delen staat op dit moment uit."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internet Connectie Delen staat niet aan"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Het instellen van Internetverbinding delen is al uitgevoerd.\n"
-"Het staat op dit moment uit.\n"
-"\n"
-"Wat wenst u te doen?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "inschakelen"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Bezig met inschakelen van servers..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetverbinding delen staat op dit moment aan"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"U staat op het punt om uw computer te configureren om zijn Internet-\n"
-"verbinding te delen. Met deze functie zullen andere computers op uw\n"
-"netwerk in staat zijn de internetverbinding van deze computer tegebruiken.\n"
-"\n"
-"Opmerking: u heeft een specifiek hiervoor bestemde netwerk-adapter nodig\n"
-"om een Local Area Network (LAN) op te zetten."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (gebruikt module %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Geen netwerk adapter op uw systeem!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Er is geen ethernet netwerkadapter op uw systeem gevonden. Gelieve het "
-"hardware configuratieprogramma te draaien."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Netwerk Interface"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Er is maar ��n geconfigureerde netwerkadapter op uw systeem:\n"
-"\n"
-"%s \n"
-"\n"
-"Ik sta op het punt om uw Local Area Network te koppelen aan\n"
-"deze adapter."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Kies alstublieft welke netwerkadapter verbinding zal maken met uw Local Area "
-"Network."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Netwerk-interface reeds geconfigureerd"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Waarschuwing, de netwerk-adapter (%s) is reeds geconfigureerd.\n"
-"\n"
-"Wilt u een automatische herconfiguratie?\n"
-"\n"
-"U kunt het ook handmatig doen, maar u moet dan wel weten wat u doet."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatisch opnieuw configureren"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Toon huidige interface-configuratie"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Huidige configuratie van '%s':\n"
-"\n"
-"Netwerk: %s\n"
-"IP adres: %s\n"
-"IP attribution: %s\n"
-"Stuurprogramma: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Het is mogelijk uw huidige configuratie te behouden en aan te nemen dat u "
-"reeds een DHCP-server heeft ingesteld; controleert u in dat geval of het "
-"klasse-C netwerk dat u gebruikt voor uw lokale netwerk correct is ingelezen; "
-"het wordt niet geherconfigureerd en uw DHCP-serverconfiguratie wordt niet "
-"aangeraakt.\n"
-"\n"
-"In andere gevallen kan het installatieprogramma uw interface herconfigureren "
-"en een DHCP-server voor u instellen.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C-Class lokaal netwerk"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "(Deze) DHCP-server IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Interface en DHCP-server opnieuw configureren"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Het lokale netwerk eindigde niet op '.0', procedure gestaakt"
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potentieel LAN-adresconflict gevonden in de huidige configuratie \n"
-"van %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Firewall configuratie gedetecteerd!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Waarschuwing! Een bestaande firewall configuratie is gevonden. U kunt "
-"misschien na de installatie een handmatige aanpassing nodig hebben."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Configureren..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Bezig met het configureren van scripts, installeren van software, starten "
-"vanservers..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemen met installeren van pakket %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Alles is geconfigureerd. \n"
-"U kunt nu uw internetverbinding delen met andere gebruikers op uw Local Area "
-"Network, met gebruikmaking van automatische netwerkconfiguratie (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"De setup van Internetverbinding delen is al uitgevoerd.\n"
-"Het staat op dit moment uit."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"De setup van Internetverbinding delen is al uitgevoerd.\n"
-"Het staat op dit moment aan."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internetverbinding delen is tot op heden nooit geconfigureerd."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configuratie van Internetverbinding delen"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Welkom bij Internetverbinding delen! \n"
-"\n"
-"%s\n"
-"\n"
-"Klik op Configureer om de instellingen-wizard in te schakelen."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netwerk-configuratie (%d adapters)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profiel: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Wis profiel..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Te verwijderen profiel:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nieuw profiel..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Naam van het te cre�ren profiel (het nieuwe profiel wordt als een kopie van "
-"het huidige aangemaakt) : "
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Hostnaam:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internet-toegang"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Soort:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Even geduld"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configureren van Internet-toegang..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN configuratie"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Stuurprogramma"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configureer Local Area Network..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Klik hier om de 'wizard' in te schakelen ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Wizard..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Toepassen"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Even geduld... bezig met toepassen van de configuratie"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Verbonden"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Niet verbonden"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Verbinding maken..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Verbinding neerleggen..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Waarschuwing: een andere internetverbinding is bespeurd, misschien gebruikt "
-"deze uw netwerk."
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"U heeft helemaal geen geconfigureerde interface.\n"
-"Configureer deze eerst door op 'Configureer' te klikken"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN Configuratie"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Opstart-protocol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Aangezet bij het opstarten"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP client"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "nu activeren"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "nu de-activeren"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Deze interface is nog niet geconfigureerd.\n"
-"Start de configuratie-wizard in het hoofdscherm."
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"U heeft helemaal geen internetverbinding.\n"
-"Cre�er er eerst ��n door op 'Configureer' te klikken"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internetverbinding configureren"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internetverbinding configureren"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Soort verbinding: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameters"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet-kaart"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP Client"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Selecteer een veiligheids-niveau"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Controle-Centrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Selecteer het programma dat u wenst te gebruiken"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canada (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "VS (ether)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "VS (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "VS (kabel-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "China (ether)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japan (ether)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japan (kabel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Oost-Europa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Ierland"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "West-Europa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australi�"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nieuw-Zeeland"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Zuid-Afrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentini�"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Gelieve uw\n"
-"TV-norm en land in te geven"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV norm :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Gebied :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Zoeken naar TV-kanalen is bezig..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Zoeken naar TV-kanalen"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "gebruik: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Wat is uw toetsenbord-layout?"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Wenst u dat de BackSpace toets Delete geeft in het terminalvenster?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Verander Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Stop a.u.b. de Installatie CD-ROM in uw drive en druk daarna op OK.\n"
-"Als u deze niet heeft, drukt u op Annuleren om \"live upgrade\" te vermijden."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Niet in staat \"live upgrade\" te starten!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"De wijziging is gemaakt, maar u moet uitloggen voordat het effect heeft"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Toon alleen voor de geselecteerde dag"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Bestand/_Nieuw"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Bestand/_Openen"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Bestand/O_pslaan"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Bestand/Ops_laan als..."
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Bestand/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opties"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opties/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Help"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Help/_Info..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Gebruiker"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Meldingen"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Uitleg van Mandrake Gereedschappen"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "zoeken"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Een hulpprogramma om uw logs bij te houden"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Instellingen"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "komt overeen met"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "maar komt niet overeen met"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Kies een bestand"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalender"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Inhoud van het bestand"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "waarschuwing via e-mail/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Even geduld, bezig met ontleden van bestand: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Configuratie van waarschuwing per e-mail/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Welkom bij het e-mail/SMS configuratieprogramma.\n"
-"\n"
-"Hier kunt u het waarschuwingssysteem instellen.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "instelling diensten"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"U zult een waarschuwing ontvangen indien ��n van de geselecteerde diensten "
-"niet meer draait"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "instelling processorbelasting"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-"U zult een waarschuwing ontvangen indien de processorbelasting hoger is dan "
-"deze waarde"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "configuratie van waarschuwing"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Configureer de manier waarop het systeem u waarschuwt"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Opslaan als..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Welk type muis heeft u?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "Geen seri�le USB gevonden\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Derde knop emuleren?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s gevonden op %s, deze configureren?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Selecteer een scanner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Deze %s-scanner is niet ondersteund"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Boot-apparaat"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Deze %s-scanner moet geconfigureerd worden met printerdrake.\n"
-"U kunt printerdrake opstarten vanuit het Mandrake Controlecentrum in de "
-"Hardware-afdeling."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Firewall configuratie"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Firewall configuratie"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"U heeft reeds een firewall ingesteld.\n"
-"Klik op Configureer om de firewall te wijzigen\n"
-"of te verwijderen."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Klik op Configureer om een standaard-firewall in te stellen."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Kies uw taal"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Installatieklasse selecteren"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Harde schijf-detectie"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Muis configureren"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Toetsenbord kiezen"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Veiligheid"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Bestandssystemen instellen"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Partities formatteren"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Te installeren pakketten kiezen"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Systeem installeren"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Gebruiker toevoegen"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Netwerk-configuratie"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Diensten configureren"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Opstart-lader installeren"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Boot-diskette aanmaken"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X Configureren"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Installeer systeemupdates"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Installatie afsluiten"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configuratie van tinyfirewall\n"
-"\n"
-"Dit programma configureert een persoonlijk instelling van de firewall\n"
-"voor deze Mandrake Linux machine. Voor een krachtige, specifieke\n"
-"firewall-oplossing, zie de gespecialiseerde MandrakeSecurity Firewall\n"
-"distributie."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"We zullen u nu enkele vragen stellen over de diensten waar u het \n"
-"Internet toestemming voor wilt geven om mee te verbinden.\n"
-"Denk alstublieft goed na over deze vragen, omdat de veiligheid \n"
-"van uw computer op het spel staat. \n"
-"\n"
-"Wanneer u op dit moment niet ��n van deze diensten draait,\n"
-"blokkeer deze dan met de firewall. U kunt deze configuratie \n"
-"altijd nog veranderen door dit programma opnieuw \n"
-"te starten!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Draait u een webserver op deze machine waar het hele Internet \n"
-"bij moet kunnen? Wanneer u een webserver draait die alleen door \n"
-"deze machine aangesproken moet kunnen worden, dan kunt u \n"
-"hier veilig 'nee' antwoorden. \n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Draait u een 'name server' op deze machine? Als u er geen hebt \n"
-"ingesteld om IP- en zone-informatie uit te delen naar het hele \n"
-"Internet, antwoordt u dan alstublieft 'nee'. \n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Wilt u binnenkomende Secure Shell (ssh)-verbindingen toestaan?\n"
-"Dit is een vervanging voor telnet welke u kunt gebruiken om in te \n"
-"loggen. Als u op dit moment telnet gebruikt, dan is het ten zeerste \n"
-"aan te raden om over te schakelen naar ssh. Telnet is niet versleuteld \n"
-"-- dus sommige aanvallers kunnen uw wachtwoord stelen als u het \n"
-"gebruikt. Ssh is versleuteld en staat dit soort afluisterpraktijken \n"
-"niet toe."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Wenst u binnenkomende telnet-verbindingen toe te staan?\n"
-"Dit is vreselijk onveilig, zoals we op het vorige scherm uiteen hebben\n"
-"gezet. We raden u sterk aan hier 'Nee' te antwoorden en ssh te \n"
-"gebruiken in plaats van telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Draait u een FTP server hier die vanaf het Internet toegankelijk moet\n"
-"zijn? Zoja, dan raden wij u sterk aan deze alleen voor 'Anonymous'\n"
-"bestandsoverdrachten te gebruiken. Ieder wachtwoord dat via FTP\n"
-"verstuurd wordt kan gestolen worden door aanvallers, omdat FTP\n"
-"eveneens geen versleuteling toepast bij het versturen van wachtwoorden.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Draait u een mail-server hier? Als u uw berichten met pine,\n"
-"mutt of een andere tekstgebaseerde mail-client verstuurt,\n"
-"dan is het antwoord waarschijnlijk 'ja'. In andere gevalen\n"
-"kunt u dit het beste blokkeren met de firewall.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Draait u een POP- of IMAP-server hier? Dit zou gebruikt\n"
-"worden om niet-webgebaseerde mail-accounts te hosten\n"
-"via deze machine.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Het heeft er alle schijn van dat u een 2.2-kernel draait. Als\n"
-"uw netwerk-IP automatisch wordt ingesteld door een computer\n"
-"in uw huis of kantoor (dynamische toewijzing), dan moeten\n"
-"we dit toelaten. Is dit het geval?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Wordt de tijd op uw computer gesynchroniseerd met een andere computer?\n"
-"Meestal wordt dit gebruikt door middelgrote Unix/Linux-organisaties\n"
-"om de tijd voor het loggen en dergelijke te synchroniseren. Als u geen\n"
-"deel uitmaakt van een groter kantoor en hier nog nooit van gehoord\n"
-"hebt, dan is dit waarschijnlijk niet het geval."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Configuratie is gereed. Kunnen we deze wijzigingen naar schijf "
-"wegschrijven?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan %s niet openen: %s \n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Fout bij het openen van %s voor schrijfbewerking: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Nee, ik heb geen DHCP nodig"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Ja, ik heb DHCP nodig"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Nee, ik heb NTP niet nodig"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Ja, ik heb NTP nodig"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Niet opslaan"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Opslaan en be�indigen"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Firewall configuratie-Wizard"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Nee (dit met de firewall van internet afsluiten)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Ja (dit met de firewall doorlaten)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr ""
-"Bezig met nagaan van ge�nstalleerde pakketten, even geduld alstublieft..."
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Het installeren van de benodigde pakketten is mislukt: %s en Bastille.\n"
-"  Probeer ze met de hand te installeren."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Netwerk-computer (client)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, ssh server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kantoor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "GNOME Werkstation"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Gereedschappen voor uw Palm Pilot of uw Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Werkstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domeinnaam en Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kantoorprogramma's: tekstverwerkers (kword, abiword), rekenbladen (kspread, "
-"gnumeric), PDF-lezers, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio-gerelateerde programma's: mp3- of midi afspelen, mengpanelen etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Boeken en Howto's over Linux en Vrije Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Werkstation"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Verzameling programma's voor post, nieuws, web, bestandsoverdracht en chatten"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL of MySQL database-server"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Programma's om de configuratie van uw computer te vergemakkelijken"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Geluid"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Hulpprogramma's"
-
-#
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentatie"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Commandoregel-gereedschappen"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix post-server, Inn nieuws-server"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet-station"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedia-station"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuratie"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Meer grafische bureaubladen (GNOME, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Het K Desktop Environment, de basis-grafische omgeving met een verzameling "
-"van bijbehorende programma's"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafische omgeving"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Programma's om CD's mee te cre�ren en te branden"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kantoor Werkstation"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafische programma's zoals The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C and C++ ontwikkelingsbibliotheken, programma's en include-bestanden"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Netwerk-computer server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Post/Groupware/Nieuws"
-
-#
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Game-station"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video-afspeel- en bewerkingsprogramma's"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafisch"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Amusementsprogramma's: arcade, bordspellen, strategie etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Verzameling programma's om e-post en usenet nieuws mee te lezen en te "
-"schrijven, en om het Web mee door te bladeren"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivering, emulators, toezicht houden"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Persoonlijke Financi�n"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Een grafische omgeving met gebruikersvriendelijke verzameling applicaties en "
-"bureaublad-programma's"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients voor verschillende protcollen waaronder ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Geluids- en video-afspeel- en bewerkingsprogramma's"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andere grafische bureaubladen"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editors, shells, bestandsbeheer, terminals"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programma's om uw financi�n mee te beheren, zoals gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Persoonlijk Gegevensbeheer"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD branden"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Wetenschappelijk werkstation"
-
-#~ msgid "About"
-#~ msgstr "Info"
-
-#~ msgid "             Help           "
-#~ msgstr "              Help"
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Kan de kernel-modules behorend bij uw kernel niet benaderen (bestand %s \n"
-#~ "is afwezig)"
diff --git a/perl-install/share/po/no.po b/perl-install/share/po/no.po
deleted file mode 100644
index 9a2e0106b..000000000
--- a/perl-install/share/po/no.po
+++ /dev/null
@@ -1,11745 +0,0 @@
-# KTranslator Generated File
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Terje Bjerkelia <terje@bjerkelia.com>, 1999-2000
-# Andreas Bergstr�m <abergstr@halden.net>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-06-13 15:54+0200\n"
-"PO-Revision-Date: 2002-03-10 11:04GMT\n"
-"Last-Translator: Terje Bjerkelia <terje@bjerkelia.com>\n"
-"Language-Team: Norsk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Configure all heads independently"
-msgstr "Konfigurere all hoder uavhengig"
-
-#: ../../Xconfigurator.pm_.c:244
-msgid "Use Xinerama extension"
-msgstr "Bruk Xinerama utvidelse"
-
-#: ../../Xconfigurator.pm_.c:247
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurer bare kort \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "Multi-head configuration"
-msgstr "Multi-hode konfigurasjon"
-
-#: ../../Xconfigurator.pm_.c:251
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Systemet ditt st�tter konfigurasjon for flere hoder.\n"
-"Hva �nsker du � gj�re?"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Graphics card"
-msgstr "Grafikk-kort"
-
-#: ../../Xconfigurator.pm_.c:263
-msgid "Select a graphics card"
-msgstr "Velg et grafikk-kort"
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "Choose a X server"
-msgstr "Velg en X-tjener"
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "X server"
-msgstr "X-tjener"
-
-#: ../../Xconfigurator.pm_.c:294
-msgid "Choose a X driver"
-msgstr "Velg en X driver"
-
-#: ../../Xconfigurator.pm_.c:294
-msgid "X driver"
-msgstr "X driver"
-
-#: ../../Xconfigurator.pm_.c:361 ../../Xconfigurator.pm_.c:367
-#: ../../Xconfigurator.pm_.c:417 ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Hvilken konfigurasjon av XFree vil du ha?"
-
-#: ../../Xconfigurator.pm_.c:375
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Kortet ditt kan ha st�tte for maskinvare 3D akselerasjon, men bare med XFree "
-"%s.\n"
-"Kortet ditt er st�ttet av XFree %s som kan ha bedre st�tte i 2D."
-
-#: ../../Xconfigurator.pm_.c:377 ../../Xconfigurator.pm_.c:410
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Kortet ditt kan ha st�tte for maskinvare 3D akselerasjon med XFree %s."
-
-#: ../../Xconfigurator.pm_.c:379 ../../Xconfigurator.pm_.c:412
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s med maskinvare 3D akselerasjon"
-
-#: ../../Xconfigurator.pm_.c:387 ../../Xconfigurator.pm_.c:401
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Kortet ditt kan ha st�tte for maskinvare 3D akselerasjon med XFree %s,\n"
-"MERK AT DETTE ER EKSPERIMENTELL ST�TTE OG KAN 'FRYSE' MASKINEN DIN."
-
-#: ../../Xconfigurator.pm_.c:389 ../../Xconfigurator.pm_.c:403
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s med EKSPERIMENTELL maskinvare 3D akselerasjon"
-
-#: ../../Xconfigurator.pm_.c:398
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Kortet ditt kan ha st�tte for maskinvare 3D akselerasjon, men bare med XFree "
-"%s,\n"
-"MERK AT DETTE ER EKSPERIMENTELL ST�TTE OG KAN 'FRYSE' MASKINEN DIN.\n"
-"Kortet ditt er st�ttet av XFree %s som kan ha bedre st�tte i 2D."
-
-#: ../../Xconfigurator.pm_.c:418
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installasjons skjermdriver)"
-
-#: ../../Xconfigurator.pm_.c:422
-msgid "XFree configuration"
-msgstr "XFree konfigurasjon"
-
-#: ../../Xconfigurator.pm_.c:497
-msgid "Select the memory size of your graphics card"
-msgstr "Velg minnest�rrelsen til grafikk-kortet ditt"
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Choose options for server"
-msgstr "Velg opsjoner for tjener"
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Choose a monitor"
-msgstr "Velg en monitor"
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:578
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"De to kritiske parametrene er den vertikale oppfrisknings-raten, som er "
-"raten\n"
-"som som oppfrisker hele skjermen, og mest viktig den horisontale \n"
-"sync-raten, som er raten som scanlinjer blir vist p�.\n"
-"\n"
-"Det et VELDIG VIKTIG at du ikke spesifiserer en monitor-type med et sync- "
-"omr�de\n"
-"som er utenfor det monitoren din er i stand til � klare: Du kan skade "
-"skjermen din.\n"
-"Hvis du er usikker, velg en konservativ innstilling."
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Horizontal refresh rate"
-msgstr "Horisontal oppfrisknings-rate"
-
-#: ../../Xconfigurator.pm_.c:586
-msgid "Vertical refresh rate"
-msgstr "Vertikal oppfrisknings-rate"
-
-#: ../../Xconfigurator.pm_.c:623
-msgid "Monitor not configured"
-msgstr "Monitor er ikke konfigurert"
-
-#: ../../Xconfigurator.pm_.c:626
-msgid "Graphics card not configured yet"
-msgstr "Grafikk-kort er ikke konfigurert enn�"
-
-#: ../../Xconfigurator.pm_.c:629
-msgid "Resolutions not chosen yet"
-msgstr "Oppl�sninger er ikke valgt enn�"
-
-#: ../../Xconfigurator.pm_.c:647
-msgid "Do you want to test the configuration?"
-msgstr "Vil du teste konfigurasjonen?"
-
-#: ../../Xconfigurator.pm_.c:651
-msgid "Warning: testing this graphics card may freeze your computer"
-msgstr "Advarsel: testing av dette grafikk-kortet kan `fryse' maskinen din"
-
-#: ../../Xconfigurator.pm_.c:654
-msgid "Test of the configuration"
-msgstr "Test konfigurasjon"
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"pr�v � endre noen parametere"
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid "An error occurred:"
-msgstr "En feil oppsto:"
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Slutter om %d sekunder"
-
-#: ../../Xconfigurator.pm_.c:745
-msgid "Is this the correct setting?"
-msgstr "Er dette den riktige innstillingen?"
-
-#: ../../Xconfigurator.pm_.c:754
-msgid "An error occurred, try to change some parameters"
-msgstr "En feil oppsto, pr�v � endre noen parametere"
-
-#: ../../Xconfigurator.pm_.c:825
-msgid "Resolution"
-msgstr "Oppl�sning"
-
-#: ../../Xconfigurator.pm_.c:877
-msgid "Choose the resolution and the color depth"
-msgstr "Velg oppl�sning og fargedybde"
-
-#: ../../Xconfigurator.pm_.c:879
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafikk-kort: %s"
-
-#: ../../Xconfigurator.pm_.c:880
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86-tjener: %s"
-
-#: ../../Xconfigurator.pm_.c:894 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Mer"
-
-#: ../../Xconfigurator.pm_.c:894 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:701
-#: ../../my_gtk.pm_.c:1034 ../../my_gtk.pm_.c:1056
-#: ../../standalone/drakbackup_.c:2288 ../../standalone/drakbackup_.c:2359
-#: ../../standalone/drakbackup_.c:2375
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:896 ../../network/netconnect.pm_.c:173
-#: ../../printerdrake.pm_.c:2473 ../../standalone/drakfloppy_.c:146
-#: ../../standalone/draknet_.c:275 ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspertmodus"
-
-#: ../../Xconfigurator.pm_.c:897
-msgid "Show all"
-msgstr "Vis alle"
-
-#: ../../Xconfigurator.pm_.c:942
-msgid "Resolutions"
-msgstr "Oppl�sninger"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatur-oppsett: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Type mus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Enhet mus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HorizSync: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1518
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafikk-kort: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Graphics card identification: %s\n"
-msgstr "Grafikk-kort identifisering: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Minne grafikk: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Fargedybde: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Oppl�sning: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1525
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86-tjener: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1526
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 driver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1544
-msgid "Preparing X-Window configuration"
-msgstr "Forbereder X-Window konfigurasjon"
-
-#: ../../Xconfigurator.pm_.c:1564
-msgid "What do you want to do?"
-msgstr "Hva �nsker du � gj�re?"
-
-#: ../../Xconfigurator.pm_.c:1569
-msgid "Change Monitor"
-msgstr "Endre monitor"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Graphics card"
-msgstr "Endre grafikk-kort"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Change Server options"
-msgstr "Endre opsjoner for tjener"
-
-#: ../../Xconfigurator.pm_.c:1574
-msgid "Change Resolution"
-msgstr "Endre oppl�sning"
-
-#: ../../Xconfigurator.pm_.c:1575
-msgid "Show information"
-msgstr "Vis informasjon"
-
-#: ../../Xconfigurator.pm_.c:1576
-msgid "Test again"
-msgstr "Test igjen"
-
-#: ../../Xconfigurator.pm_.c:1577 ../../printerdrake.pm_.c:2476
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Avslutt"
-
-#: ../../Xconfigurator.pm_.c:1585
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Behold endringene?\n"
-"N�v�rende konfigurasjon er:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1606
-msgid "Graphical interface at startup"
-msgstr "X ved oppstart"
-
-#: ../../Xconfigurator.pm_.c:1607
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"Jeg kan sette opp maskinen din til � automatisk starte X ved oppstart.\n"
-"Vil du at X skal starte n�r du starter maskinen p� nytt?"
-
-#: ../../Xconfigurator.pm_.c:1613
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Vennligst logg inn i %s p� nytt for � aktivere endringene"
-
-#: ../../Xconfigurator.pm_.c:1628
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Vennligst logg ut og bruk s� Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 farger (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tusen farger (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tusen farger (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millioner farger (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milliarder farger (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB eller mer"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 ved 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA 800x600 ved 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibel, 1024x768 ved 87 Hz interlaced (ikke 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ved 87 Hz interlaced, 800x600 ved 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Utvidet Super VGA, 800x600 ved 60 Hz, 640x480 ved 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Ikke-interlaced SVGA, 1024x768 ved 60 Hz, 800x600 ved 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "H�yfrekvens SVGA, 1024x768 ved 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Flerfrekvens som kan klare 1280x1024 ved 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Flerfrekvens som kan klare 1280x1024 ved 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Flerfrekvens som kan klare 1280x1024 ved 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor som kan klare 1600x1200 ved 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor som kan klare 1600x1200 ved 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "F�rste sektor av oppstartspartisjon"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "F�rste sektor av disk (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO-installasjon"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Hvor �nsker du installere oppstartslasteren?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub-installasjon"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO med tekstmeny"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO med grafisk meny"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Start fra DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Hovedopsjoner for oppstartslaster"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Oppstartslaster som skal brukes"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Installasjon oppstartslaster"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Oppstartsenhet"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (virker ikke p� gamle BIOS'er)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Skjermmodus"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Forsinkelse f�r oppstart av standard bilde"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1087 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:710 ../../printerdrake.pm_.c:808
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Passord"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1088
-msgid "Password (again)"
-msgstr "Passord (igjen)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Begrense kommandolinje-opsjoner"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "begrense"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "T�m /tmp ved hver oppstart"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Presiser RAM-st�rrelse hvis det trengs (funnet %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Sl� p� multiprofiler"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Oppgi ram-st�rrelsen i MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opsjon ``Begrense kommandolinje-opsjoner'' kan ikke brukes uten et passord"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1143
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "Please try again"
-msgstr "Vennligst pr�v igjen"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "The passwords do not match"
-msgstr "Passordene stemmer ikke overens"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Initmelding"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "�pne firmwareforsinkelse"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Kernel Boot Timeout"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Skal det v�re mulig � boote fra CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Skal det v�re mulig � boote fra OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Standard operativsystem?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Du har bestemt deg for � installere oppstartslasteren p� en partisjon.\n"
-"Dette inneb�rer at du allerede har en oppstartslaster p� den disken du "
-"starter fra (eks: System Commander.)\n"
-"\n"
-"Hvilken disk starter du fra?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Her er de forskjellige oppf�ringene.\n"
-"Du kan legge til flere eller endre de eksisterende."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:741
-#: ../../standalone/drakbackup_.c:850 ../../standalone/drakfont_.c:790
-#: ../../standalone/drakfont_.c:827
-msgid "Add"
-msgstr "Legg til"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Ferdig"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modifiser"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Hvilken inngangstype vil du legge til"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:884
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Andre OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Andre OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Andre OS (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Bilde"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Tilf�ye"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Les-skriv"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabell"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Usikker"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etikett"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Standard"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrdst�rrelse"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Ingen video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Fjern inngang"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Tom etikett er ikke tillatt"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Du m� velge ett kjernebilde"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Du m� ha en rotpartisjon"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Denne etiketten er allerede i bruk"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fant %s %s grensesnitt"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Har du enda ett?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Har du noen %s grensesnitt?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "No"
-msgstr "Nei"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Se maskinvareinfo"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installerer driver for %s kort %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hvilken %s driver skal jeg pr�ve?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"I noen tilfeller trenger %s driveren � ha ekstra informasjon for � virke\n"
-"ordentlig, selv om den normalt virker fint foruten. �nsker du � spesifisere "
-"ekstra\n"
-"opsjoner for den eller tillate driveren � sondere maskinen din for\n"
-"informasjonen den trenger? Av og til vil sondering stoppe maskinen, men "
-"burde\n"
-"ikke for�rsake noen skader."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatisk sondering"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Spesifiser opsjoner"
-
-#: ../../any.pm_.c:725
-#, fuzzy, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Du kan n� gi modul %s de opsjoner du f�ler for.\n"
-"Merk at addresser b�r gis med 0x prefikset som i '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Du kan n� oppgi dens opsjoner for modul %s.\n"
-"Opsjonene er i format ``navn=verdi navn2=verdi2 ...''.\n"
-"F.eks., ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modulopsjoner:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Lasting av modul %s feilet.\n"
-"�nsker du � pr�ve igjen med andre parametere?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "tilgang til X-programmer"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "tilgang til rpmverkt�y"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "tilgang til \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "tilgang til administrative filer"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(allerede lagt til %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Dette passordet er for enkelt"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Vennligst oppgi et brukernavn"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Brukernavnet kan kun inneholde sm� bokstaver, tall, `-' og `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Denne brukeren er allerede lagt til"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Legg til bruker"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Entre en bruker\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Godta bruker"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Virkelig navn"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:709
-#: ../../printerdrake.pm_.c:807
-msgid "User name"
-msgstr "Brukernavn"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Skall"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autoinnlogging"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Jeg kan sette opp maskinen din til � automatisk logge p� en bruker ved "
-"oppstart.\n"
-"Vil du bruke denne tjenesten?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Velg standard bruker:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Velg vindush�ndtereren som skal kj�res:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Vennligst velg spr�k som skal brukes."
-
-#: ../../any.pm_.c:851
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "Du kan velge andre spr�k som vil v�re tilgjengelige etter installasjon"
-
-#: ../../any.pm_.c:865 ../../install_steps_interactive.pm_.c:689
-#: ../../standalone/drakxtv_.c:78
-msgid "All"
-msgstr "Alle"
-
-#: ../../any.pm_.c:957
-msgid "Allow all users"
-msgstr "Tillat alle brukere"
-
-#: ../../any.pm_.c:957
-msgid "Custom"
-msgstr "Skreddersydd"
-
-#: ../../any.pm_.c:957
-msgid "No sharing"
-msgstr "Ingen deling"
-
-#: ../../any.pm_.c:967 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Pakken %s m� installeres. Vil du installere den?"
-
-#: ../../any.pm_.c:970
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "Du kan eksportere med NFS eller Samba. Hvilken av dem �nsker du"
-
-#: ../../any.pm_.c:978 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Obligatorisk pakke %s mangler"
-
-#: ../../any.pm_.c:984
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:998 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:564
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:702 ../../my_gtk.pm_.c:705 ../../my_gtk.pm_.c:1034
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1588
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2254
-#: ../../standalone/drakbackup_.c:2279 ../../standalone/drakbackup_.c:2300
-#: ../../standalone/drakbackup_.c:2321 ../../standalone/drakbackup_.c:2339
-#: ../../standalone/drakbackup_.c:2387 ../../standalone/drakbackup_.c:2407
-#: ../../standalone/drakbackup_.c:2426 ../../standalone/drakfloppy_.c:235
-#: ../../standalone/drakfloppy_.c:384 ../../standalone/drakfont_.c:768
-#: ../../standalone/drakgw_.c:598 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:527
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Avbryt"
-
-#: ../../any.pm_.c:998
-msgid "Launch userdrake"
-msgstr "Start userdrake"
-
-#: ../../any.pm_.c:1000
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"per-user deling bruker gruppen \"fileshare\". \n"
-"Du kan bruke userdrake til � legge til en bruker i denne gruppen."
-
-#: ../../any.pm_.c:1037
-msgid "Welcome To Crackers"
-msgstr "Velkommen til Crackers"
-
-#: ../../any.pm_.c:1038
-msgid "Poor"
-msgstr "D�rlig"
-
-#: ../../any.pm_.c:1039 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1040
-msgid "High"
-msgstr "H�y"
-
-#: ../../any.pm_.c:1041
-msgid "Higher"
-msgstr "H�yere"
-
-#: ../../any.pm_.c:1042
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../any.pm_.c:1045
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Dette niv�et b�r brukes med forsiktighet. Det gj�r systemet ditt lettere �\n"
-"bruke, men mer utsatt: det m� ikke brukes p� en maskin koblet til andre\n"
-"eller til Internett. Det er ingen adgang med passord."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Passord er n� aktivert, men bruk som nettverksmaskin er fortsatt ikke "
-"anbefalt."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Dette er standard sikkerhet anbefalt for en maskin som vil bli brukt til "
-"tilkobling mot Internett som klient."
-
-#: ../../any.pm_.c:1050
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Det er allerede noen restriksjoner, og flere automatiske kontroller kj�res "
-"hver natt."
-
-#: ../../any.pm_.c:1051
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Med dette sikkerhetsniv�et kan systemet brukes som tjener.\n"
-"Sikkerheten er n� h�y nok til � bruke systemet som en tjener som godtar\n"
-"oppkoblinger fra mange klienter. Merk: Hvis maskinen din kun er en klient p� "
-"Internett burde du velge et lavere niv�."
-
-#: ../../any.pm_.c:1054
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Basert p� forrige niv�, men n� er systemet fullstendig stengt.\n"
-"Sikkerhetsfunksjonene er n� p� maksimum."
-
-#: ../../any.pm_.c:1059
-msgid "Please choose the desired security level."
-msgstr "Velg sikkerhetsniv�"
-
-#: ../../any.pm_.c:1062
-msgid "Security level"
-msgstr "Sikkerhetsniv�"
-
-#: ../../any.pm_.c:1064
-msgid "Use libsafe for servers"
-msgstr "Bruk libsafe for tjenere"
-
-#: ../../any.pm_.c:1065
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Ett bibliotek som beskytter mot buffer overflow og strengformateringsangrep."
-
-#: ../../any.pm_.c:1067
-msgid "Security user (login or email)"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:354
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Velkommen til %s, operativsystem-velgeren!\n"
-"\n"
-"Velg et operativsystem fra listen over eller\n"
-"vent %d sekunder for standard oppstart.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:910
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Velkommen til GRUB, operativsystem-velgeren!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:913
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Bruk %c og %c tastene for � velge hvilken inngang som er markert."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:916
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Trykk enter for � starte opp valgt OS, 'e' for � redigere"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:919
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "kommandoer for oppstart, eller 'c' for en kommandolinje."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:922
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Den markerte inngangen vil bli startet automatisk om %d sekunder."
-
-#: ../../bootloader.pm_.c:926
-msgid "not enough room in /boot"
-msgstr "ikke nok plass i /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1026
-msgid "Desktop"
-msgstr "Skrivebord"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1028
-msgid "Start Menu"
-msgstr "Startmeny"
-
-#: ../../bootloader.pm_.c:1047
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Du kan ikke installere oppstartslasteren p� en %s partisjon\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ingen hjelp implementert enn�.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Oppstartsstilkonfigurasjon"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/drakfloppy_.c:82
-#: ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fil"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fil/_Avslutt"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Categorizing Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradisjonell monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradisjonell Gtk+ monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Start Aurora ved oppstart"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modus"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modus"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Du bruker for �yeblikket %s som oppstartsh�ndterer.\n"
-"Klikk p� Konfigurer for � starte oppsett-hjelperen."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1457
-#: ../../standalone/drakbackup_.c:1468 ../../standalone/drakgw_.c:592
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigurer"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Systemmodus"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the graphical environment when your system starts"
-msgstr "Start W-Windowsystemet ved oppstart"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nei, jeg vil ikke ha autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, jeg vil ha autologin med denne (bruker; skrivebord)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2431 ../../standalone/drakbackup_.c:3335
-#: ../../standalone/drakfloppy_.c:377 ../../standalone/drakfont_.c:537
-#: ../../standalone/drakfont_.c:658 ../../standalone/drakfont_.c:721
-#: ../../standalone/drakfont_.c:766 ../../standalone/draknet_.c:109
-#: ../../standalone/draknet_.c:141 ../../standalone/draknet_.c:297
-#: ../../standalone/draknet_.c:436 ../../standalone/draknet_.c:522
-#: ../../standalone/draknet_.c:565 ../../standalone/draknet_.c:666
-#: ../../standalone/logdrake_.c:520
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kan ikke �pne /etc/inittab for lesing: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutter"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minutt"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekunder"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Jeg kan ikke ta skjembilder f�r partisjonering."
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Skjermbilder vil v�re tilgjengelig etter installasjon i %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../network/tools.pm_.c:113
-msgid "France"
-msgstr "Frankrike"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27 ../../network/tools.pm_.c:116
-msgid "Belgium"
-msgstr "Belgia"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Tjekkia"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Germany"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Hellas"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norge"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Sverige"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34 ../../network/tools.pm_.c:114
-msgid "Netherlands"
-msgstr "Netherlands"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../network/tools.pm_.c:115
-#: ../../standalone/drakxtv_.c:74
-msgid "Italy"
-msgstr "Italia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "�sterrike"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67 ../../network/tools.pm_.c:117
-msgid "United States"
-msgstr "USA"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Vennligst ta sikkerhetskopi av din data f�rst"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:899
-#: ../../diskdrake/interactive.pm_.c:908 ../../diskdrake/interactive.pm_.c:962
-msgid "Read carefully!"
-msgstr "Les n�ye!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Hvis du skal bruke aboot, v�re n�ye med � la det v�re ledig plass (2048 "
-"sektorer er nok)\n"
-"ved begynnelsen av disken"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Feil"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Wizard"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Velg handling"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Du har en stor FAT partisjon\n"
-"(vanligvis brukt av Microsoft Dos/Windows).\n"
-"Jeg forsl�r at du f�rst endrer st�rrelsen p� denne partisjonen\n"
-"(klikk p� den, klikk s� p� \"Endre st�rrelse\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Vennligst klikk p� en partisjon"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detaljer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journal filsystem"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Veksel"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1058
-msgid "Empty"
-msgstr "Tom"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:933
-msgid "Other"
-msgstr "Andre"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Filsystemtyper:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Opprett"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Type"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Bruk ``%s'' istedet"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Slett"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Bruk ``Demonter'' f�rst"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Etter endring av type p� partisjon %s, vil alle data p� denne partisjonen g� "
-"tapt"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Velg en partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Velg en annen partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Avslutt"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Skift til ekspertmodus"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Skift til normalmodus"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Angre"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Fortsette likevel?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Avslutt uten � lagre"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Avslutt uten � skrive partisjonstabellen?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "�nsker du � lagre modifiseringen av /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automatisk allokering"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Fjern alle"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Harddisk informasjon"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Alle prim�re partisjoner er i bruk"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Jeg kan ikke legge til flere partisjoner"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"For � ha flere partisjoner vennligst slett en for � kunne opprette en "
-"utvidet partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Lagre partisjonstabeller"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Redde partisjonstabell"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "N�dpartisjonstabell"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Last partisjonstabell p� nytt"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Fjernbart media automontering"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Velg fil"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Kopien av partisjonstabellen har ikke samme st�rrelse\n"
-"Fortsette for det?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Advarsel"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Sett inn en diskett i stasjonen\n"
-"Alle data p� denne disketten vil g� tapt"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Pr�ver � redde partisjonstabell"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detaljert informasjon"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:535
-#: ../../diskdrake/interactive.pm_.c:562 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Monteringspunkt"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Valg"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:629
-msgid "Resize"
-msgstr "Endre st�rrelse"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:682
-msgid "Move"
-msgstr "Flytt"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formater"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Monter"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Legg til RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Legg til LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Demonter"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Fjern fra RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Fjern fra LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modifiser RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Bruk for loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Opprette en ny partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Start sektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:781
-msgid "Size in MB: "
-msgstr "St�rrelse i MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:782
-msgid "Filesystem type: "
-msgstr "Filsystemtype: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1042
-#: ../../diskdrake/interactive.pm_.c:1116
-msgid "Mount point: "
-msgstr "Monteringspunkt: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Valg: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Fjern loopbackfilen?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Endre partisjonstype"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Hvilket filsystem �nsker du?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Bytter fra ext2 til ext3"
-
-#: ../../diskdrake/interactive.pm_.c:533
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Hvor vil du montere loopback-filen %s?"
-
-#: ../../diskdrake/interactive.pm_.c:534 ../../diskdrake/interactive.pm_.c:561
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hvor vil du montere %s enheten?"
-
-#: ../../diskdrake/interactive.pm_.c:540
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan ikke fjerne monteringspunkt da denne partisjonen blir brukt til\n"
-"loopback. Fjern loopback f�rst"
-
-#: ../../diskdrake/interactive.pm_.c:585
-msgid "Computing FAT filesystem bounds"
-msgstr "Beregner fat filsystemgrense"
-
-#: ../../diskdrake/interactive.pm_.c:585 ../../diskdrake/interactive.pm_.c:644
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Endrer st�rrelse"
-
-#: ../../diskdrake/interactive.pm_.c:617
-msgid "This partition is not resizeable"
-msgstr "Denne partisjonen kan ikke st�rrelsen forandres p�"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "All data on this partition should be backed-up"
-msgstr "Alle data p� denne partisjonen burde sikkerhetskopieres"
-
-#: ../../diskdrake/interactive.pm_.c:624
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Etter endring av st�rrelse for partisjon %s, vil alle data p� denne\n"
-"partisjonen vil g� tapt"
-
-#: ../../diskdrake/interactive.pm_.c:629
-msgid "Choose the new size"
-msgstr "Velg den nye st�rrelsen"
-
-#: ../../diskdrake/interactive.pm_.c:630
-msgid "New size in MB: "
-msgstr "Ny st�rrelse i MB: "
-
-#: ../../diskdrake/interactive.pm_.c:683
-msgid "Which disk do you want to move it to?"
-msgstr "Hvilken disk vil du flytte til?"
-
-#: ../../diskdrake/interactive.pm_.c:684
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:685
-msgid "Which sector do you want to move it to?"
-msgstr "Hvilken sektor vil du flytte til?"
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving"
-msgstr "Flytter"
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving partition..."
-msgstr "Flytter partisjon..."
-
-#: ../../diskdrake/interactive.pm_.c:705
-msgid "Choose an existing RAID to add to"
-msgstr "Velg en eksisterende RAID for � legge til"
-
-#: ../../diskdrake/interactive.pm_.c:706 ../../diskdrake/interactive.pm_.c:724
-msgid "new"
-msgstr "ny"
-
-#: ../../diskdrake/interactive.pm_.c:722
-msgid "Choose an existing LVM to add to"
-msgstr "Velg en eksisterende LVM for � legge til"
-
-#: ../../diskdrake/interactive.pm_.c:727
-msgid "LVM name?"
-msgstr "LVM navn?"
-
-#: ../../diskdrake/interactive.pm_.c:767
-msgid "This partition can't be used for loopback"
-msgstr "Denne partisjonen kan ikke brukes for loopback"
-
-#: ../../diskdrake/interactive.pm_.c:779
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "Loopback file name: "
-msgstr "Loopback filnavn: "
-
-#: ../../diskdrake/interactive.pm_.c:785
-msgid "Give a file name"
-msgstr "Gi ett filnavn"
-
-#: ../../diskdrake/interactive.pm_.c:788
-msgid "File already used by another loopback, choose another one"
-msgstr "Filen blir allerede brukt av en annen loopback, velg en annen"
-
-#: ../../diskdrake/interactive.pm_.c:789
-msgid "File already exists. Use it?"
-msgstr "Filen eksisterer allerede. Bruke denne?"
-
-#: ../../diskdrake/interactive.pm_.c:812
-msgid "Mount options"
-msgstr "Monteringsvalg:"
-
-#: ../../diskdrake/interactive.pm_.c:819
-msgid "Various"
-msgstr "Diverse"
-
-#: ../../diskdrake/interactive.pm_.c:882 ../../standalone/drakfloppy_.c:104
-msgid "device"
-msgstr "enhet"
-
-#: ../../diskdrake/interactive.pm_.c:883
-msgid "level"
-msgstr "niv�"
-
-#: ../../diskdrake/interactive.pm_.c:884
-msgid "chunk size"
-msgstr "skivest�rrelse"
-
-#: ../../diskdrake/interactive.pm_.c:899
-msgid "Be careful: this operation is dangerous."
-msgstr "V�r forsiktig: denne operasjonen er farlig."
-
-#: ../../diskdrake/interactive.pm_.c:914
-msgid "What type of partitioning?"
-msgstr "Hva slags type partisjonering?"
-
-#: ../../diskdrake/interactive.pm_.c:932
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Beklager, jeg vil ikke tillate oppretting av /boot s� lange inne p� disken "
-"(p� en sylinder > 1024).\n"
-"Enten bruker du LILO og denne ikke virker, eller du bruker ikke LILO og du "
-"trenger ikke /boot"
-
-#: ../../diskdrake/interactive.pm_.c:936
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Partisjonen du valgte � legge til som root (/) er lokalisert fysisk "
-"bortenfor\n"
-"den 1024'de sylinderen p� hard-disken, og du har ingen /boot partisjon.\n"
-"Hvis du skal bruke oppstartsh�ndtereren LILO, v�r n�ye med � legge til en\n"
-"/boot partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:942
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Du har valgt en programvare RAID partisjon som root (/).\n"
-"Ingen oppstartslaster kan h�ndtere dette uten en /boot partisjon.\n"
-"S� v�r n�ye med � legge til en /boot partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:962
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partisjonstabellen p� disk %s blir n� skrevet til disk!"
-
-#: ../../diskdrake/interactive.pm_.c:966
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Du m� starte maskinen p� nytt for at modifiseringene skal tre i kraft"
-
-#: ../../diskdrake/interactive.pm_.c:977
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Etter formatering av partisjon %s vil alle data p� denne partisjonen\n"
-"g� tapt"
-
-#: ../../diskdrake/interactive.pm_.c:979
-msgid "Formatting"
-msgstr "Formatering"
-
-#: ../../diskdrake/interactive.pm_.c:980
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formaterer loopback-fil %s"
-
-#: ../../diskdrake/interactive.pm_.c:981
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formaterer partisjon %s"
-
-#: ../../diskdrake/interactive.pm_.c:992
-msgid "Hide files"
-msgstr "Gjem filer"
-
-#: ../../diskdrake/interactive.pm_.c:992
-msgid "Move files to the new partition"
-msgstr "Flytt filer til en ny partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:993
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Katalogen %s inneholder allerede noe data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-msgid "Moving files to the new partition"
-msgstr "Flytt filer til en ny partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:1008
-#, c-format
-msgid "Copying %s"
-msgstr "Kopierer %s"
-
-#: ../../diskdrake/interactive.pm_.c:1012
-#, c-format
-msgid "Removing %s"
-msgstr "Fjerner %s"
-
-#: ../../diskdrake/interactive.pm_.c:1022
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partisjon %s er n� kjent som %s"
-
-#: ../../diskdrake/interactive.pm_.c:1043
-#: ../../diskdrake/interactive.pm_.c:1102
-msgid "Device: "
-msgstr "Enhet: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS diskbokstav: %s (bare en gjetning)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1056
-#: ../../diskdrake/interactive.pm_.c:1120
-msgid "Type: "
-msgstr "Type: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-msgid "Name: "
-msgstr "Navn: "
-
-#: ../../diskdrake/interactive.pm_.c:1060
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "Size: %s"
-msgstr "St�rrelse: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorer"
-
-#: ../../diskdrake/interactive.pm_.c:1065
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Sylinder %d til %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-msgid "Formatted\n"
-msgstr "Formatert\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-msgid "Not formatted\n"
-msgstr "Ikke formatert\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-msgid "Mounted\n"
-msgstr "Montert\n"
-
-#: ../../diskdrake/interactive.pm_.c:1069
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1071
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback-fil(er): \n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1072
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partisjon startet opp som standard\n"
-"    (for MS-DOS oppstart, ikke for lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1074
-#, c-format
-msgid "Level %s\n"
-msgstr "Niv� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1075
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Skivest�rrelse %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-disker %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1078
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback filnavn: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1081
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Det er store sjanser for at\n"
-"denne partisjonen er en\n"
-"driverpartisjon, du b�r nok\n"
-"la den v�re i fred.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1084
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Denne spesielle Bootstrap-\n"
-"partisjonen er for �\n"
-"dual-boote ditt system.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1103
-#, c-format
-msgid "Size: %s\n"
-msgstr "St�rrelse: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1104
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometri: %s sylindere, %s hoder, %s sektorer\n"
-
-#: ../../diskdrake/interactive.pm_.c:1105
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1106
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-disker %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1107
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Type partisjonstabell: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1108
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "p� buss %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1122
-#, c-format
-msgid "Options: %s"
-msgstr "Valg: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Filesystem encryption key"
-msgstr "Filsystemkrypteringsn�kkel"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Choose your filesystem encryption key"
-msgstr "Velg din filsystemkrypteringsn�kkel"
-
-#: ../../diskdrake/interactive.pm_.c:1142
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Denne krypteringsn�kkelen er for enkel (m� v�re minst %d tegn lang)"
-
-#: ../../diskdrake/interactive.pm_.c:1143
-msgid "The encryption keys do not match"
-msgstr "Krypteringsn�kkelene stemmer ikke overens"
-
-#: ../../diskdrake/interactive.pm_.c:1146
-msgid "Encryption key"
-msgstr "Krypteringsn�kkel"
-
-#: ../../diskdrake/interactive.pm_.c:1147
-msgid "Encryption key (again)"
-msgstr "Krypteringsn�kkel (igjen)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Endre type"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a medium"
-msgstr "Vennligst klikk p� ett media"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "S�k tjenere"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering av %s mislykket"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Jeg vet ikke hvordan formatere %s i type %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montere partisjon %s i katalog %s gikk ikke"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck avsluttet med feilkode %d eller signal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "feil ved demontering av %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "enkel"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "med /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Du kan ikke bruke JFS for partisjoner mindre enn 16 MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Du kan ikke bruke ReiserFS for partisjoner mindre enn 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Monteringspunkter m� begynne med /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Det finnes allerede en partisjon med monteringspunkt %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Du kan ikke bruke LVM logisk volum som monteringspunkt %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Denne katalogen b�r forbli i root filsystemet"
-
-#: ../../fsedit.pm_.c:486
-#, fuzzy
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Du trenger et virkelig filsystem (ext2, reiserfs) for dette "
-"monteringspunktet\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Du kan ikke bruke ett kryptert filsystem som monteringspunkt %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Ikke nok plass for auto-allokering"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Ikkenoe � gj�re"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Feil ved �pning av %s for skriving: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"En feil har oppst�tt - ingen gyldige enheter ble funnet for � opprette nye "
-"filsystemer. Vennligst sjekk maskinvaren din for �rsaken til dette problemet"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Du har ingen partisjoner!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux er ett multibrukersystem, og dette betyr at hver bruker kan ha "
-"sine\n"
-"instillinger, sine egne filer osv. Du kan lese brukerguiden for � f� vite "
-"mer.\n"
-"Men i motsetning til root, som er administratoren, s� vil brukerene du "
-"legger til\n"
-"her ikke ha rett til � forandre noe annet enn deres egne filer "
-"ogkonfigurasjon.\n"
-"Du m� lage minst en bruker for deg selv.\n"
-"Denne kontoen b�r du bruke for all rutinebruk. Selv om det er praktisk � "
-"logge\n"
-"inn som root hver dag, kan deg ogs� v�re veldig farlig! Den minste feil "
-"kunne\n"
-"bety at systemet ditt ikke lenger virker. Hvis du gj�r en stor feil som en "
-"vanlig\n"
-"bruker vil du kunne miste noe informasjon, men ikke hele systemet.\n"
-"\n"
-"F�rst m� du skrive inn ditt virkelige navn. Dette er ikke n�dvendig, da du "
-"kan\n"
-"skrive inn hva du vil. drakX vil ta det f�rste ordet du legger inn og "
-"foresl� det som\n"
-"brukernavn. Dette er det brukernavnet den brukeren vil bruke for � logge seg "
-"p�\n"
-"systemet. Du kan forandre det. Du m� legge inn ett passord her. En "
-"ikkepriviligert\n"
-"brukers passord er ikke s� viktig som root sitt sett i fra "
-"systemsikkerhetens side,\n"
-"men det er ingen grunn til ignorere det av den grunn, det er dine filer som "
-"er i \n"
-"faresonen.\n"
-"\n"
-"Hvis du klikker p� aksepter bruker kan du da legge til s� mange brukere som "
-"du\n"
-"vil. N�r du har lagt til alle de brukerene du �nsker, klikk p� ferdig.\n"
-"\n"
-"Ved � klikke p� avansert kan du forandre hvilket shell brukeren har som "
-"standard.\n"
-"(Det vanlige er bash)"
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ovenfor nevnes de eksisterende Linux partisjonene oppdaget p�\n"
-"harddisken din. Du kan beholde valg som er gjort av hjelperen, de er gode "
-"for vanlig\n"
-"bruk. Du kan endre disse valgene, du m� i hvertfall definere en root\n"
-"partisjon (\"/\"). Ikke velg for liten partisjon ellers vil du ikke kunne\n"
-"installere nok programvare. Hvis du �nsker � lagre dine data p� en separat "
-"partisjon\n"
-"m� du ogs� velge en \"/home\" (bare mulig hvis du har mer enn en\n"
-"Linux partisjon tilgjengelig).\n"
-"\n"
-"\n"
-"For informasjon, hver partisjon er listet som f�lger: \"Navn\", \"Kapasitet"
-"\".\n"
-"\n"
-"\n"
-"\"Navn\" er kodet som f�lger: \"harddisk type\", \"harddisk nummer\",\n"
-"\"partisjon nummer\" (f.eks., \"hda1\").\n"
-"\n"
-"\n"
-"\"Harddisk type\" er \"hd\" hvis harddisken din er en IDE harddisk og \"sd"
-"\"\n"
-"hvis den er en SCSI harddisk.\n"
-"\n"
-"\n"
-"\"Hard drive nummer\" er alltid en bokstav etter \"hd\" eller \"sd\". Med "
-"IDE harddisker:\n"
-"\n"
-"   * \"a\" betyr \"master harddisk p� prim�r IDE kontroller\",\n"
-"\n"
-"   * \"b\" betyr \"slave harddisk p� prim�r IDE kontroller\",\n"
-"\n"
-"   * \"c\" betyr \"master harddisk p� sekund�r IDE kontroller\",\n"
-"\n"
-"   * \"d\" betyr \"slave harddisk p� sekund�r IDE kontroller\".\n"
-"\n"
-"\n"
-"Med SCSI harddisker, en \"a\" betyr \"prim�r harddisk\", en \"b\" betyr "
-"\"sekund�r harddisk\", etc..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux installasjonen er spredd ut over flere CDROMer. DrakX \n"
-"vet om en pakke er p� en annen CDROM og vil spytte ut den v�v�rende\n"
-"CD og be deg sette i en annen en ved behov."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Det er n� p� tide � spesifisere hvilke programmer du �nsker � installere p�\n"
-"systemet ditt. Det er tusenvis av pakker tilgjengelig for Mandrake Linux, og "
-"det er ikke meningen at du skal kunne navnet p� samtlige.\n"
-"\n"
-"Hvis du utf�rer en standard installasjon fra CDROM, vil du f�rst bli bedt "
-"om\n"
-"� spesifisere de CDene du har for �yeblikket (kun i ekspertmodus). Sjekk "
-"CDene\n"
-"og velg de bokser som tilsvarer de CDer som du har klare for installasjon.\n"
-"Klikk \"OK\" n�r du er klar til � fortsette.\n"
-"\n"
-"Pakkene er delt inn i grupper som korresponderer til typisk bruk av din "
-"maskin\n"
-"Gruppene er igjen delt inn i fire seksjoner:\n"
-"\n"
-" *�\"Arbeidsstasjon\": hvis du planlagger � bruke din maskin som "
-"arbeidsstasjon, velg\n"
-"en eller flere av de tilh�rende grupper.\n"
-"\n"
-" * \"Utvikling\": hvis maskinen skal brukes til programmering, velg �nskede "
-"grupper.\n"
-"\n"
-" * \"Server\": Hvis maskinen skal brukes som server, vil du kunne velge\n"
-"hvilke av de mest vanlige tjenester som du �nsker installert p�\n"
-"maskinen.\n"
-"\n"
-" * \"Grafisk milj�\": til slutt, det er her du kan velge ditt �nskede\n"
-"grafiske milj�. Du m� velge minst ett hvis du �nsker � ha en grafisk\n"
-"arbeidsstasjon!\n"
-"\n"
-"Ved � flytte musepekeren over et gruppenavn vil en kort forklarende tekst\n"
-"dukke opp over den gruppen. Hvis du �nsker � ikke velge noen grupper under\n"
-"installasjon (og du ikke oppgraderer), s� vil en dialog sp�rre deg om hva\n"
-"slags minimal installasjon du �nsker:\n"
-"\n"
-"* \"Med X\" For en minste installasjon med X-tjener inkludert;\n"
-"\n"
-" * \"With basic documentation\" Installerer basesystemet pluss standard\n"
-"verkt�y og dokumentasjon for disse. Denne installasjonen passer til � sette\n"
-"opp en server.\n"
-"\n"
-" * \"Truly minimal install\" vil installere minimum som er n�dvendig for �\n"
-"Linux systemet opp og g�, kun kommandolinje. Denne installasjonen er p�\n"
-"rundt 65Mb.\n"
-"\n"
-"Du kan merke av \"Individual package selection\" boksen, som er nyttig\n"
-"hvis du kjenner til pakkene som blir tilbydt eller hvis du �nsker � ha\n"
-"total kontroll over hva som vil bli installert.\n"
-"\n"
-"Hvis du startet installasjonen i \"Upgrade\" modus, kan du velge vekk alle\n"
-"grupper for � unng� � installere noen nye pakker. Dette er nyttig for\n"
-"reparasjon eller oppdatering av et eksisterende system."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Til slutt, avhengig av ditt valg av om du vil velge enkeltpakker eller\n"
-"ikke, s� vil du f� se ett tre som inneholder alle pakkene sortert p� "
-"grupper\n"
-"og undergrupper. N�r du surfer gjennom treet, kan du velge grupper, \n"
-"undergrupper eller individuelle pakker.\n"
-"\n"
-"N�r du velger en pakke i treet, vil en beskrivelse dukke opp til h�yre. \n"
-"N�r du er ferdig med � velge, klikk \"Installer\" knappen som da vil starte\n"
-"installasjonsprosessen. Avhengig av hastigheten p� din maskin, og antall\n"
-"pakker som skal installeres, kan det ta en stund � gj�re ferdig "
-"installasjonen.\n"
-"Ett estimat p� hvor lang tid det vil ta vises p� skjermen for � hjelpe deg "
-"�\n"
-"avgj�re om du har tid til en kopp kaffe.\n"
-"\n"
-"!! Hvis en tjenerpakke har blitt valgt, vil du bli bedt om � bekrefte at du "
-"�nsker\n"
-"� installere denne. Under Mandrake Linux vil alle installerte tjenere bli \n"
-"startet ved oppstart. Selv om de er sikre og ikke har noen kjente "
-"sikkerhetshull\n"
-"n�r denne distribusjonen ble sluppet, s� kan det v�re at sikkerhetshull "
-"ble \n"
-"oppdaget etter at denne versjonen av Mandrake Linux ble sluppet. Hvis du\n"
-"ikke vet hva en type tjene gj�r, eller hvorfor den blir installert, klikk "
-"\"Nei\".\n"
-"\"Ja\" vil installere tjeneren(e) og de(n) vil bli started automatisk som "
-"standard.\n"
-"\n"
-"\"Automatiske avhengigheter\" valget bare fjerner advarselsdialogboksen som\n"
-"kommer n�r installasjonsprogrammet automatisk velger en pakke. Dette skjer "
-"fordi\n"
-"den har funnet ut at den m� tilfredsstille en avhengighet med en annen pakke "
-"for\n"
-"� fullstendig gjennomf�re installasjonen.\n"
-"\n"
-"Det lille diskettikonet p� bunnen av listen lar deg laste pakkelisten som du "
-"valgte\n"
-"under en tidligere installasjon. N�r du klikker p� dette ikonet vil du bli "
-"bedt om �\n"
-"sette inn disketten som ble laget under avslutningen av en annen "
-"installasjon. Se\n"
-"det andre tipset for det siste skrittet for hvordan lage en slik diskett."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"F�r du g�r videre b�r du lese lisensen n�ye.\n"
-"Den dekker hele Mandrake Linux distribusjonen og hvis du ikke er enig\n"
-"med alt den sier, klikk p� \"Jeg nekter\" knappensom �yeblikkelig\n"
-"avslutter installasjonen. For � fortsette installasjonen, klikk p�\n"
-"\"Jeg aksepterer\" knappen."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"P� dette punktet er det tid for � velge sikkerhetsniv�et som passer for\n"
-"maskinen. Som en tommelfingerregel, jo mere utsatt maskinen er, og jo mere\n"
-"viktig data som er lagret der, jo h�yere b�r sikkerhetsniv�et v�re.\n"
-"Men, et h�yere sikkerhetsniv� g�r gjerne p� beskostning av "
-"brukvennligheten.\n"
-"Se i MSEC kapittelet i ``Reference Manual'' for � f� mer informasjon om\n"
-"disse niv�ene.\n"
-"\n"
-"Hvis du ikke vet hva du skal velge, behold standard valg."
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"P� dette punktet m� du velge hvilken\n"
-"partisjon(er) som skal brukes til � installere ditt nye Mandrake Linux "
-"system. Hvis partisjoner\n"
-"allerede har blitt definert (fra en tidligere installasjon av GNU/Linux "
-"eller fra\n"
-"et annet partisjoneringsverkt�y), kan du bruke eksisterende partisjoner. I "
-"andre tilfeller\n"
-"m� harddiskpartisjoner defineres.\n"
-"\n"
-"\n"
-"For � opprette partisjoner m� du f�rst velge en harddisk. Du kan velge disk\n"
-"for partisjonering ved � klikke p� \"hda\" for den f�rste IDE disken, \"hdb"
-"\" for\n"
-"den andre eller \"sda\" for den f�rste SCSI disken osv.\n"
-"\n"
-"\n"
-"For � partisjonere den valgte harddisken kan du bruke disse valgene:\n"
-"\n"
-"   * Fjern alle: dette valget sletter alle partisjoner tilgjengelig p� den "
-"valgte harddisken.\n"
-"\n"
-"\n"
-"   * Auto allokering:: dette valget lar deg automatisk opprette Ext2 og "
-"veksel partisjoner p� den ledige plassen p�\n"
-"     harddisken din.\n"
-"\n"
-"\n"
-"   * Redd partisjonstabell: hvis partisjonstabellen din er skadet kan du "
-"fors�ke � redde den ved � bruke dette valget. V�r\n"
-"     forsiktig og husk at det kan g� galt.\n"
-"\n"
-"\n"
-"   * Angre: du kan bruke dette valget til kanselere endringene dine.\n"
-"\n"
-"\n"
-"   * Last igjen: du kan bruke dette valget hvis du angrer alle endringer og "
-"vil laste partisjonstabellen du begynte med\n"
-"\n"
-"\n"
-"   * Veiviser: Hvis du �nsker � bruke en hjelper til � partisjonere "
-"harddisken din kan du bruke dette valget. Anbefales hvis\n"
-"     du ikke har god kunnskap om partisjonering.\n"
-"\n"
-"\n"
-"   * Gjenopprett fra diskett: hvis du har lagret partisjonstabellen din p� "
-"en diskett under en tidligere installasjon kan du\n"
-"     gjenopprette denne ved � bruke dette valget.\n"
-"\n"
-"\n"
-"   * Lagre p� diskett: hvis du �nsker � lagre partisjonstabellen din p� en "
-"diskett for � kunne gjenopprette denne kan du bruke dette\n"
-"     valget. Det anbefales p� det sterkeste � bruke dette valget.\n"
-"\n"
-"\n"
-"   * Ferdig: n�r du er ferdig med � partisjonere harddisken din bruk dette "
-"valget til � lagre endringene dine.\n"
-"\n"
-"\n"
-"For informasjon kan du n� valgene ved � bruke tastaturet: naviger gjennom "
-"partisjonene ved � bruke Tab og Up/Down pilene.\n"
-"\n"
-"\n"
-"N�r en partisjon er valgt kan du bruke:\n"
-"\n"
-"           * Ctrl-c til � opprette en ny partisjon (n�r en tom partisjon er "
-"valgt)\n"
-"\n"
-"           * Ctrl-d til � slette en partisjon\n"
-"\n"
-"           * Ctrl-m til � sette monteringspunktet\n"
-".............\n"
-"\n"
-".............\n"
-"Hvis du installerer p� en PPV maskin, s� vil du nok lage en liten "
-"HFS'bootstrap-partisjon' p� minst en megabyte for bruk\n"
-"av yaboot oppstartslasteren. Hvis du �nsker  � lage partisjonen litt st�rre, "
-"laoss si 50 MB, s� kan du kanskje lagre en ekstra kjene og ramdiskbilde for "
-"n�dsituasjoner."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mer enn en Microsoft Windows partisjon har blitt\n"
-"oppdaget p� harddisken din. Vennligst velg den du �nsker � endre st�rrelsen "
-"p� for �\n"
-"installere ditt nye Mandrake Linux operativsystem.\n"
-"\n"
-"\n"
-"For informasjon, hver partisjon er listet som f�lger: \"Linux navn\", "
-"\"Windows\n"
-"navn\" \"Kapasitet\".\n"
-"\n"
-"\"Linux navn\" er kodet som f�lger: \"harddisk type\", \"harddisk nummer\",\n"
-"\"partisjon nummer\" (f.eks., \"hda1\").\n"
-"\n"
-"\n"
-"\"Harddisk type\" er \"hd\" hvis harddisken din er en IDE harddisk og \"sd"
-"\"\n"
-"hvis den er en SCSI harddisk.\n"
-"\n"
-"\n"
-"\"Hard drive nummer\" er alltid en bokstav etter \"hd\" eller \"sd\". Med "
-"IDE harddisker:\n"
-"\n"
-"   * \"a\" betyr \"master harddisk p� prim�r IDE kontroller\",\n"
-"\n"
-"   * \"b\" betyr \"slave harddisk p� prim�r IDE kontroller\",\n"
-"\n"
-"   * \"c\" betyr \"master harddisk p� sekund�r IDE kontroller\",\n"
-"\n"
-"   * \"d\" betyr \"slave harddisk p� sekund�r IDE kontroller\".\n"
-"\n"
-"Med SCSI harddisker, en \"a\" betyr \"prim�r harddisk\", en \"b\" betyr "
-"\"sekund�r harddisk\", etc.\n"
-"\n"
-"\"Windows navn\" er bokstaven p� harddisken din under Windows (den f�rste "
-"disken\n"
-"eller partisjonen er kalt \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "V�r t�lmodig. Denne operasjonen kan ta flere minutter."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Vennligst velg den riktige porten. F.eks., \"COM1\" porten under\n"
-"Windows blir kalt \"ttyS0\" i GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) og Grub er oppstartslastere: de kan starte opp enten\n"
-"GNU/Linux eller et annet operativsystem som du har p� datamaskinen din.\n"
-"Normalt blir de andre operativsystemene korrekt oppdaget og installert.\n"
-"Hvis dette ikke er tilfelle, kan du legge til disse for h�nd i dette\n"
-"bildet. V�r n�ye med � velge de korrekte parameterene.\n"
-"\n"
-"Hvis du ikke �nsker � gi tilgang til de andre operativsystemene til\n"
-"andre kan du fjerne linjene for disse. Men i s� tilfelle trenger du\n"
-"en oppstartsdiskett for � starte disse!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Du m� indikere hvor du �nsker �\n"
-"plassere informasjonen som beh�ves for oppstart av GNU/Linux.\n"
-"\n"
-"Med mindre du vet akkurat hva du gj�r, velg \"F�rste sektor av\n"
-"disken (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Du kan legge til flere valg for yaboot, enten for andre operativsystemer\n"
-"andre kjerner, eller for ett n�dbootspeil.\n"
-"\n"
-"For andre OS best�r inngangen bare av et navn og rotpartisjonen\n"
-"\n"
-"For Linux er det et par mulige valg:\n"
-"\n"
-" * Label: Dette er navnet du vil skrive ved yaboot klartegnet for � velge\n"
-"dette oppstartsvalget.\n"
-"\n"
-" * Image: Dette er navnet p� kjernen for oppstart. Typisk vmlinux\n"
-"eller en variasjon av vmlinux med en utvidelse.\n"
-"\n"
-" * Root: \"root\" enheten eller \"/\" for Linux installasjonen din.\n"
-"\n"
-" * Append: P� Apple maskinvare er kjerneopsjonen append ofte brukt til\n"
-"� assistere i initialisering av video maskinvare, eller til � sl� p� "
-"tastatur\n"
-"museknapp emulering for de ofte manglende andre og tredje museknappene p� "
-"en\n"
-"Apple mus. Her er noen eksempler:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: Dette valget kan brukes enten til � laste initiale moduler, f�r\n"
-"oppstartsenheten er tilgengelig, eller til � laste et ramdisk-bilde for en\n"
-"n�doppstart situasjon.\n"
-"\n"
-" * Initrd-size: Standard ramdisk st�rrelse er vanligvis 4,096 bytes. Hvis "
-"du\n"
-"trenger � allokere en stor ramdisk, kan dette valget brukes.\n"
-"\n"
-" * Read-write: Normalt kommer \"root\" partisjonen opp som read-only for �\n"
-"la et filsystem sjekke for systemet system blir \"live\".\n"
-"Her kan du overstyre dette valget.\n"
-"\n"
-" * NoVideo: Skulle Apple video maskinvaren vise seg � v�re veldig\n"
-"problematisk, kan du velge dette valget for � starte i \"novideo\" modus, "
-"med\n"
-"egen framebuffer st�tte.\n"
-"\n"
-" * Default: Velger denne inngangen som standard Linux valg, og kan velges\n"
-"ved � trykke ENTER ved yaboot klartegnet. Denne inngangen vil ogs� bli\n"
-"fremhevet med en \"*\", hvis du trykker [Tab] for � se oppstarts-\n"
-"valgene."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot er en oppstartslaster for NewWorld MacIntosh maskinvare. Den kan\n"
-"starte enten GNU/Linux, MacOS eller MacOSX, hvis de er til stede p� din\n"
-"datamaskin. Vanligvis vil disse andre operativsystemer bli korrekt oppdaget\n"
-"og installert. Hvis dette ikke skulle v�re tilfelle kan du legge til "
-"endringer\n"
-"her. V�r forsiktig n�r du velger de korrekte parametre.\n"
-"\n"
-"Yaboots hovedvalg er:\n"
-"\n"
-"\n"
-" * Init beskjed: En enkel melding som vises f�r oppstartsprosessen starter.\n"
-"\n"
-" * Oppstartsenhet: Indikerer hvor du �nsker � plassere informasjonen som "
-"trengs\n"
-"for � starte GNU/Linux. Du vil generelt ha satt opp en bootstrap-partisjon\n"
-"tidligere for � ta vare p� denne informasjonen.\n"
-"\n"
-" * �pne firmwareforsinkelse: Ulikt LILO s� er det to forsinkelser\n"
-"som er tilgjengelig med yaboot. Den f�rste forsinkelsen blir m�lt i\n"
-"sekunder og du kan ved det punktet velge mellom CD, OF-boot, \n"
-"MacOS eller Linux.\n"
-"\n"
-" * Kjerneboot Timeout: Denne er lik LILO oppstartsforsinkelse.\n"
-"Etter � ha valgt Linux, vil du ha 0,1 sekunder f�r standard kjerne\n"
-"blir valgt.\n"
-"\n"
-" * Aktiver CD Boot?: Hvis du velger dette valget vil du kunne\n"
-"trykke \"C\" for CD ved det f�rste oppstartsvalget.\n"
-"\n"
-" * Aktiver OF Boot?: Hvis du velger dette valget vil du kunne\n"
-"trykke\n"
-"\"N\" for Open Firmware ved det f�rste oppstartsvalget.\n"
-"\n"
-" * Standard OS: Du kan velge hvilket OS som skal lastes n�r\n"
-"Open Firmwareforsinkelsen er utl�pt."
-
-#: ../../help.pm_.c:862
-#, fuzzy
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": DrakX gjetter tidssonen din ut i fra spr�ket du\n"
-"har valgt. Men her, ogs� for valget av tastatur, er du kanskje ikke\n"
-"i det landet som valgt spr�k skulle tilsi.\n"
-"Derfor m� du kanskje klikke p� \"Timezone\" knappen for � konfigurere\n"
-"klokken til tidssonen der du er.\n"
-"\n"
-" * \"Printer\": Klikke p� \"No Printer\" knappen vil �pne skriver\n"
-"konfigureringshjelperen.\n"
-"\n"
-" * \"Sound card\": Hvis et lydkort blir oppdaget p� systemet ditt, blir det\n"
-"vist her. Ingen modifisering mulig under installering.\n"
-"\n"
-" * \"TV card\": Hvis et TV-kort blir oppdaget p� systemet ditt, blir det\n"
-"vist her. Ingen modifisering mulig under installering.\n"
-"\n"
-" * \"ISDN card\": Hvis et ISDN-kort blir oppdaget p� systemet ditt, blir "
-"det\n"
-"vist her. Du kan klikke p� knappen for � endre parameterene assosiert\n"
-"til dette."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Velg den harddisken du �nsker � slette for � installere din nye Mandrake\n"
-"Linux partisjon. V�r forsiktig, alle data p� denne vil g� tapt og vil ikke\n"
-"kunne gjenopprettes!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klikk p� \"OK\" hvis du �nsker � slette alle data og partisjoner p� denne\n"
-"harddisken. V�r forsiktig, etter at du har klikket p� \"OK\" vil du ikke\n"
-"kunne gjenopprette data og partisjoner p� denne harddisken inkludert "
-"Windows\n"
-"data.\n"
-"\n"
-"Klikk p� \"Avbryt\" for � avbryte denne operasjonen uten � miste data og\n"
-"partisjoner p� denne harddisken."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Kan ikke f� tilgang til kjernemoduler ihht. kjernen din (fil %s mangler), "
-"dette betyr vanligvis at oppstartsdisketten din ikke er i synk med "
-"installasjonsmediet (vennligst opprett en nyere diskett)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Du m� ogs� formatere %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"D har valgt f�lgende tjener(e): %s\n"
-"\n"
-"\n"
-"Disse tjenerene er aktivert som standard. De har ingen kjente sikkerhets-\n"
-"problemer, men noen nye kan bli funnet. I s� tilfelle m� du oppgradere\n"
-"s� snart som mulig.\n"
-"\n"
-"\n"
-"�nsker du virkelig � installere disse tjenerene?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan ikke bruke broadcast med intet NIS domene"
-
-#: ../../install_any.pm_.c:794
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sett inn en FAT-formatert diskett i stasjon %s"
-
-#: ../../install_any.pm_.c:798
-msgid "This floppy is not FAT formatted"
-msgstr "Denne disketten er ikke FAT-formatert"
-
-#: ../../install_any.pm_.c:810
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"For � bruke dette valget av pakker, start installasjonen med'linux "
-"defcfg=floppy'"
-
-#: ../../install_any.pm_.c:832 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Feil ved lesing av fil %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Noe maskinvare i maskinen din trenger ``riktige'' drivere for � virke.\n"
-"Du kan finne noe informasjon om disse her: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Du m� ha en root-partisjon.\n"
-"Opprett en partisjon for dette (eller klikk p� en eksisterende).\n"
-"Velg s� ``Monteringspunkt'' og  sett dette til `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Du m� ha en vekslingspartisjon"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Du har ingen vekselpartisjon\n"
-"\n"
-"Fortsette likevel?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Du m� ha en FAT-parisjonen montert under /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Bruk ledig plass"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ikke nok plass til � allokere en ny partisjon"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partitions"
-msgstr "Bruk eksisterende partisjon"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Det finnes ingen eksisterende partisjon som kan brukes"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Bruk Windows partisjonen for loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Hvilken partisjon vil du bruke for Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Velg st�rrelsene"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Root-partisjonsst�rrelse i MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Veksel-partisjonsst�rrelse i MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Bruk den ledige plassen p� Windows partisjonen"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Hvilken partisjonstype �nsker du � forandre st�rrelse p�?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing Windows partition"
-msgstr "Beregner Windows filsystemgrense"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"St�rrelsesendreren for FAT greide ikke � h�ndtere din partisjon, \n"
-"f�lgende feil oppsto: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Windows-partisjonen din er for fragmentert, vennligst kj�r ``defrag'' f�rst"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ADVARSEL!\n"
-"\n"
-"DrakX vil n� endre st�rrelsen p� Windows partisjonen din. V�r\n"
-"forsiktig: denne operasjonen er farlig. Hvis du ikke allerede har\n"
-"gjort det burde du f�rst kj�re scandisk under Windows (og som en\n"
-"opsjon kj�re defrag) p� denne partisjonen og ta sikkerhetskopi av dine "
-"data.\n"
-"N�r du er sikker, trykk Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for Windows on"
-msgstr "Hvilken st�rrelse �nsker du � beholde vinduer p�?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partisjon %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Krymping/forst�rring av FAT feilet: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partition to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Det finnes ingen FAT partisjon � forandre st�rrelsen p� eller � bruke som "
-"loopback (ikke nok plass igjen)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Slette hele disken"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Fjern Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Du har mer enn en harddisk, hvilken �nsker du � installere linux p�?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "ALLE eksisterende partisjoner og deres data vil v�re tapt p� disk %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Egendefinert diskpartisjonering"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Bruk fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Du kan n� partisjonere %s.\n"
-"N�r du er ferdig ikke glem � lagre med `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Du har ikke nok ledig plass p� Windows partisjonen din"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Jeg kan ikke finne noe rom for installering"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX partisjonsveiviseren fant f�lgende l�sninger:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partisjonering feilet: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Henter opp nettverket"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Tar ned nettverket"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"En feil oppsto, men jeg vet ikke hvordan jeg skal h�ndtere dette p� en\n"
-"pen m�te.\n"
-"Fortsett p� eget ansvar."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dupliser monteringspunkt %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Noen viktige pakker ble ikke installert ordentlig.\n"
-"Det er noe galt enten med CD-rom'en eller CD-platen.\n"
-"Sjekk cd-platen p� en installert maskin med \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Velkommen til %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ingen diskettstasjon tilgjengelig"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrer trinn `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Systemet ditt har lite ressurser. Du kan muligens oppleve noen problemer\n"
-"ved installering av Mandrake Linux. Hvis dette skjer kan du pr�ve tekst- "
-"installering\n"
-"i stedet. Trykk `F1' ved oppstart av CD-ROM, skriv s� `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installeringsklasse"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Vennligst velg en av f�lgende installasjonsklasser:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Den totale st�rrelsen for gruppene du har valgt er omtrent %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Hvis du �nsker � installere mindre enn denne st�rrelsen,\n"
-"velg den prosentdelen av pakkene som du �nsker � installere.\n"
-"\n"
-"En lav prosentdel vil installere bare de mest viktige pakkene;\n"
-"en prosentdel p� 100%% vil installere alle valgte pakker."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Du har plass p� disken din for bare %d%% av disse pakkene.\n"
-"\n"
-"Hvis du �nsker � installere mindre enn dette,\n"
-"velg den prosentdelen av pakkene som du �nsker � installere.\n"
-"En lav prosentdel vil installere bare de mest viktige pakkene;\n"
-"en prosentdel p� %d%% vil installere s� mange pakker som mulig."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Du vil kunne velge disse mere spesifisert i neste trinn."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Prosentdel av pakker � installere"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:675
-msgid "Package Group Selection"
-msgstr "Valg pakkegruppe"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:690
-msgid "Individual package selection"
-msgstr "Individuelt pakkevalg"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:615
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Total st�rrelse: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "D�rlig pakke"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Navn: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versjon: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "St�rrelse: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Viktighet: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Du kan ikke velge denne pakken da det ikke er igjen nok plass til � "
-"installere denne"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "F�lgende pakker vil bli installert"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "F�lgende pakker vil bli fjernet"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Du kan ikke velge/fjerne denne pakken"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dette er en bestemt pakke, den kan ikke fjernes"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Du kan ikke fjerne denne pakken, den er allerede installert"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Denne pakken m� oppgraderes\n"
-"Er du sikker p� at du ikke vil velge denne?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Du kan ikke fjerne denne pakken. Den m� oppgraderes"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Vis automatisk valgte pakker"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installer"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Lagre p�/hente fra diskett"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Oppdaterer pakkevalg"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimal installasjon"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:525
-msgid "Choose the packages you want to install"
-msgstr "Velg pakkene du �nsker � installere"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:757
-msgid "Installing"
-msgstr "Installerer"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Beregner"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tid som gjenst�r "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation..."
-msgstr "Vennligst vent, forbereder installasjon"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakker"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installerer pakke %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Godta"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-msgid "Refuse"
-msgstr "Nekte"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:782
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Bytt CD!\n"
-"\n"
-"Vennligst sett inn CD'en merket \"%s\" i stasjonen og trykk Ok n�r du er "
-"ferdig.\n"
-"Hvis du ikke har den trykk Avbryt for � unng� installasjon fra denne CD'en."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:794
-#: ../../install_steps_interactive.pm_.c:798
-msgid "Go on anyway?"
-msgstr "Fortsette uansett?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:794
-msgid "There was an error ordering packages:"
-msgstr "Det var en feil ved endring av pakkenes rekkef�lge:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:798
-msgid "There was an error installing packages:"
-msgstr "Det var en feil ved installering av pakkene:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "En feil oppsto"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "�nsker du virkelig � forlate installasjonen?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "License agreement"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1017
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatur"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Vennligst velg tastatur-oppsettet ditt."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Her er den komplette lista over tilgjengelige tastatur"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Hvilken installasjonsklasse �nsker du?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installer/Oppdater"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Er dette en installering eller en oppdatering?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Anbefalt"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Oppgrader"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Oppgrader kun pakker"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Vennligst velg din musetype."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port mus"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Vennligst velg hvilken serieport musen din koblet til."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulering knapper"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulering 2 knapper"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulering 3 knapper"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurerer PCMCIA kort..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfigurerer IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "No partition available"
-msgstr "ingen tilgjengelige partisjoner"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Skanner partisjoner for � finne monteringspunkter"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Velg monteringspunktene"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Jeg kan ikke lese partisjonstabellen din, den er for �delagt for meg :(\n"
-"Jeg kan fors�ke � blanke ut d�rlige partisjoner (ALLE DATA vil g� tapt!)\n"
-"Den andre l�sningen er � ikke la DrakX modifisere partisjonstabellen.\n"
-"(feilen er %s)\n"
-"\n"
-"Vil du miste alle partisjonene?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake klarte ikke � lese partisjonstabellen korrekt.\n"
-"Fortsett p� eget ansvar!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Det er ikke plass for 1 MB bootstrap! Installasjonen vil fortsette, but for "
-"�boote systemet ditt, m� du lage en bootstrap partisjon i DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Ingen rotpartisjon funnet for oppgradering"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Rotpartisjon"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Hva er rotpartisjonen (/) p� ditt system?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Du m� starte maskinen p� nytt for at modifiseringene skal tre i kraft"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Velg partisjonene du �nsker � partisjonere"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Sjekke fo rd�rlige clustere?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formaterer partisjoner"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Lager of formaterer fila %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"Det er ikke nok SWAP til � fullf�re installasjonen, vennligst legg til litt "
-"mer"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages..."
-msgstr "S�ker etter tilgjengelige pakker"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade..."
-msgstr "Finner pakker som skal oppgraderes"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"Ditt system har ikke nok plass igjen for installasjon eller oppgradering (%d "
-"> %d)"
-
-#: ../../install_steps_interactive.pm_.c:538
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vennligst velg lagre eller hente pakkevalg p� diskett.\n"
-"Formatet er det samme som for auto_install genererte disketter."
-
-#: ../../install_steps_interactive.pm_.c:541
-msgid "Load from floppy"
-msgstr "Hent fra diskett"
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Loading from floppy"
-msgstr "Henter fra disketten"
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Package selection"
-msgstr "Pakkevalg"
-
-#: ../../install_steps_interactive.pm_.c:548
-msgid "Insert a floppy containing package selection"
-msgstr "Sett inn en diskett med pakkevalget"
-
-#: ../../install_steps_interactive.pm_.c:560
-msgid "Save on floppy"
-msgstr "Lagre p� diskett"
-
-#: ../../install_steps_interactive.pm_.c:628
-msgid "Selected size is larger than available space"
-msgstr "Valgt st�rrelse er st�rre enn tilgjengelig plass"
-
-#: ../../install_steps_interactive.pm_.c:641
-msgid "Type of install"
-msgstr "Type av installasjon"
-
-#: ../../install_steps_interactive.pm_.c:642
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Du har ikke valgt noen pakkegrupper.\n"
-"Vennligst velg den minimale installasjonen du �nsker:"
-
-#: ../../install_steps_interactive.pm_.c:645
-msgid "With X"
-msgstr "Med X"
-
-#: ../../install_steps_interactive.pm_.c:647
-msgid "With basic documentation (recommended!)"
-msgstr "Med grunnleggende dokumentasjon (anbefalt!)"
-
-#: ../../install_steps_interactive.pm_.c:648
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Virkelig minimal installasjon (uten urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:732
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Hvis du har alle CDene i listen nedenfor, klikk Ok.\n"
-"Hvis du ikke har noen av disse CDene, klikk Avbryt.\n"
-"Hvis bare noen av CDene mangler, fjern disse, klikk s� Ok."
-
-#: ../../install_steps_interactive.pm_.c:737
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROMen ved navnet \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:757
-msgid "Preparing installation"
-msgstr "Forbereder installasjon"
-
-#: ../../install_steps_interactive.pm_.c:766
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installerer pakke %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:812
-msgid "Post-install configuration"
-msgstr "Konfigurasjon postinstallering"
-
-#: ../../install_steps_interactive.pm_.c:818
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sett inn en oppstartsdiskett i stasjon %s"
-
-#: ../../install_steps_interactive.pm_.c:824
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sett inn oppdater moduler disketten i stasjon %s"
-
-#: ../../install_steps_interactive.pm_.c:844
-msgid ""
-"You now have the opportunity to download encryption software.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Du har n� mulighet til � laste ned programvare for kryptering.\n"
-"\n"
-"ADVARSEL:\n"
-"\n"
-"Pga. forskjellige krav som er tillagt denne programvaren og p�lagt av "
-"forskjellige\n"
-"myndigheter, b�r kunde og/eller sluttbruker av denne programvaren forsikre "
-"seg\n"
-"om at lovene i sin/deres jurisdiksjon tillater han/dem � laste ned, ha i "
-"besittelse\n"
-"og/eller bruke denne programvaren.\n"
-"\n"
-"I tillegg skal kunde og/eller sluttbruker spesielt v�re oppmerksom p� � ikke "
-"bryte\n"
-"lovene i sin/deres jurisdiksjon. Skulle kunde og/eller sluttbruker ikke\n"
-"respektere bestemmelsene av disse lovene, vil han/de p�dra seg alvorlige\n"
-"sanksjoner.\n"
-"\n"
-"Under ingen omstendighet skal Mandrakesoft og eller ikke sine produsenter og/"
-"eller\n"
-"leverand�rer bli holdt ansvarlige for s�rskilte, indirekte eller tilfeldige\n"
-"skader uansett hva som enn skulle (inkludert, men ikke begrenset til tap av "
-"fortjeneste,\n"
-"forretningsavbrudd, tap av kommersiell data og andre pengemessige tap, og "
-"endelige\n"
-"ansvarsforhold og erstatninger som skal betales if�lge en rettslig\n"
-"avgj�relse) oppst� ut av bruk, besittelse, eller ene og alene nedlastingen\n"
-"av denne programvaren, som kunde og/eller sluttbruker til slutt kan ha\n"
-"tilgang til etter � ha sagt seg enig i og undertegnet fremviste avtale.\n"
-"\n"
-"For sp�rsm�l ang�ende denne avtalen, vennligst kontakt \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:883
-#, fuzzy
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been released after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Du har n� muligheten til � laste ned pakker som har blitt sluppet\n"
-"etter at distribusjonen ble sluppet.\n"
-"\n"
-"Du kan f� sikkerhetsoppdateringer og bugfikser, men du trenger en\n"
-"internettoppkobling for � fortsette.\n"
-"\n"
-"�nsker du � installere oppdateringene?"
-
-#: ../../install_steps_interactive.pm_.c:898
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Kontakter Mandrake Linux web-sted for � f� en liste over tilgjengelige speil"
-
-#: ../../install_steps_interactive.pm_.c:903
-msgid "Choose a mirror from which to get the packages"
-msgstr "Velg et speil som pakkene kan hentes fra"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Kontakter speilet for � f� en liste over tilgjengelige pakker"
-
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Which is your timezone?"
-msgstr "Hva er din tidsone?"
-
-#: ../../install_steps_interactive.pm_.c:944
-msgid "Hardware clock set to GMT"
-msgstr "Maskinvareklokken din satt til GMT"
-
-#: ../../install_steps_interactive.pm_.c:945
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatisk tidssynkronisering (ved hjelp av NTP)"
-
-#: ../../install_steps_interactive.pm_.c:952
-msgid "NTP Server"
-msgstr "NTP-tjener"
-
-#: ../../install_steps_interactive.pm_.c:986
-#: ../../install_steps_interactive.pm_.c:994
-msgid "Remote CUPS server"
-msgstr "Fjern-CUPS tjener"
-
-#: ../../install_steps_interactive.pm_.c:987
-msgid "No printer"
-msgstr "Ingen skriver"
-
-#: ../../install_steps_interactive.pm_.c:1004
-msgid "Do you have an ISA sound card?"
-msgstr "Har du et ISA lydkort?"
-
-#: ../../install_steps_interactive.pm_.c:1006
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Kj�r \"sndconfig\" etter installasjonen for � konfigurere lydkortet ditt"
-
-#: ../../install_steps_interactive.pm_.c:1008
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Lydkort ikke oppdaget. Pr�v \"harddrake\" etter installasjonen"
-
-#: ../../install_steps_interactive.pm_.c:1013 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Oppsummering"
-
-#: ../../install_steps_interactive.pm_.c:1016
-msgid "Mouse"
-msgstr "Mus"
-
-#: ../../install_steps_interactive.pm_.c:1018
-msgid "Timezone"
-msgstr "Tidssone"
-
-#: ../../install_steps_interactive.pm_.c:1019 ../../printerdrake.pm_.c:2279
-#: ../../printerdrake.pm_.c:2357
-msgid "Printer"
-msgstr "Skriver"
-
-#: ../../install_steps_interactive.pm_.c:1021
-msgid "ISDN card"
-msgstr "ISDN-kort"
-
-#: ../../install_steps_interactive.pm_.c:1024
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sound card"
-msgstr "Lydkort"
-
-#: ../../install_steps_interactive.pm_.c:1028
-msgid "TV card"
-msgstr "TV-kort"
-
-#: ../../install_steps_interactive.pm_.c:1066
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1094
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1067
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1103
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1068
-#: ../../install_steps_interactive.pm_.c:1090
-msgid "Local files"
-msgstr "Lokale filer"
-
-#: ../../install_steps_interactive.pm_.c:1077
-#: ../../install_steps_interactive.pm_.c:1078 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Sett root-passord"
-
-#: ../../install_steps_interactive.pm_.c:1079
-msgid "No password"
-msgstr "Intet passord"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Dette passordet er for enkelt (m� v�re minst %d tegn langt)"
-
-#: ../../install_steps_interactive.pm_.c:1090 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentifikasjon"
-
-#: ../../install_steps_interactive.pm_.c:1098
-msgid "Authentication LDAP"
-msgstr "Autentisering LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1099
-msgid "LDAP Base dn"
-msgstr "LDAP grunnleggende dn"
-
-#: ../../install_steps_interactive.pm_.c:1100
-msgid "LDAP Server"
-msgstr "LDAP-tjener"
-
-#: ../../install_steps_interactive.pm_.c:1106
-msgid "Authentication NIS"
-msgstr "Autentisering NIS"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "NIS Domain"
-msgstr "NIS-domene"
-
-#: ../../install_steps_interactive.pm_.c:1108
-msgid "NIS Server"
-msgstr "NIS-tjener"
-
-#: ../../install_steps_interactive.pm_.c:1143
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"En egendefinert oppstartsdiskett er en m�te � starte Linux-systemet p� uten\n"
-"� v�re avhengig av den vanlige oppstartslasteren. Dette er nyttig hvis du "
-"ikke �nsker\n"
-"� installere SILO p� systemet ditt, eller et annet operativsystem fjerner "
-"SILO,\n"
-"eller at SILO ikke virker med din maskinvarekonfigurasjon. En egendefinert "
-"oppstartsdiskett\n"
-"kan ogs� brukes sammen med Mandrake's redningsbilde, som gj�r det mye "
-"lettere gjenopprette\n"
-"etter systemsvikt.\n"
-"Hvis du �nsker du � opprette en oppstartsdiskett for systemet ditt, sett inn "
-"en diskett\n"
-"i den f�rste stasjonen og trykk \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1159
-msgid "First floppy drive"
-msgstr "F�rste diskettstasjon"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid "Second floppy drive"
-msgstr "Andre diskettstasjon"
-
-#: ../../install_steps_interactive.pm_.c:1161 ../../printerdrake.pm_.c:1851
-msgid "Skip"
-msgstr "Dropp"
-
-#: ../../install_steps_interactive.pm_.c:1166
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"En egendefinert oppstartsdiskett er en m�te � starte Linux-systemet p� uten\n"
-"� v�re avhengig av den vanlige oppstartslasteren. Dette er nyttig hvis du "
-"ikke �nsker\n"
-"� installere LILO (eller grub) p� systemet ditt, eller et annet "
-"operativsystem fjerner LILO,\n"
-"eller at LILO ikke virker med din maskinvarekonfigurasjon. En egendefinert "
-"oppstartsdiskett\n"
-"kan ogs� brukes sammen med Mandrake's redningsbilde, som gj�r det mye "
-"lettere gjenopprette\n"
-"etter systemsvikt. �nsker du � opprette en oppstartsdiskett for systemet "
-"ditt?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(ADVARSEL! Du bruker XFS p� din rotpartisjon,\n"
-"det � lage en oppstartsdiskett p� en 1,44 Mb diskett vil\n"
-"antageligvis ikke g�, dan XFS trenger en veldig stor driver)."
-
-#: ../../install_steps_interactive.pm_.c:1180
-msgid "Sorry, no floppy drive available"
-msgstr "Beklager, ingen diskettstasjon tilgjengelig"
-
-#: ../../install_steps_interactive.pm_.c:1184
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Velg diskettstasjonen du �nsker � bruke for � lage oppstartsdisketten"
-
-#: ../../install_steps_interactive.pm_.c:1188
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Sett inn en diskett i %s"
-
-#: ../../install_steps_interactive.pm_.c:1191
-msgid "Creating bootdisk..."
-msgstr "Oppretter oppstartdiskett"
-
-#: ../../install_steps_interactive.pm_.c:1198
-msgid "Preparing bootloader..."
-msgstr "Klargj�r oppstartslaster"
-
-#: ../../install_steps_interactive.pm_.c:1209
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Det virker som du har en OldWorld eller ukjent\n"
-"maskin, yaboot oppstartslasteren vil ikke virke for deg.\n"
-"Installasjonen vil fortsette, men du m�\n"
-"bruke BootX for � starte din maskin."
-
-#: ../../install_steps_interactive.pm_.c:1215
-msgid "Do you want to use aboot?"
-msgstr "�nsker du � bruke aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1218
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Feil ved installasjon av aboot, \n"
-"pr�ve � installere selv om det �delegger den f�rste partisjonen?"
-
-#: ../../install_steps_interactive.pm_.c:1225
-msgid "Installing bootloader"
-msgstr "Installer oppstartslaster"
-
-#: ../../install_steps_interactive.pm_.c:1231
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installasjon av oppstartslaster mislykket. F�lgende feil oppsto:"
-
-#: ../../install_steps_interactive.pm_.c:1239
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Du m� muligens endre din Open Firmware oppstartsenhet for �\n"
-" sl� p� oppstartslasteren. Hvis du ikke ser oppstartslasteren ved\n"
-" omstart, hold nede Command-Option-O-F ved omstart og skriv:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Skriv s�: shut-down\n"
-"Ved din neste oppstart burde du se oppstartslasteren."
-
-#: ../../install_steps_interactive.pm_.c:1283
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sett inn en tom diskett i stasjon %s"
-
-#: ../../install_steps_interactive.pm_.c:1287
-msgid "Creating auto install floppy..."
-msgstr "Oppretter diskett for autoinstallasjon"
-
-#: ../../install_steps_interactive.pm_.c:1298
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Noen trinn er ikke fullf�rt.\n"
-"\n"
-"�nsker du virkelig � avslutte n�?"
-
-#: ../../install_steps_interactive.pm_.c:1309
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulerer, installasjonen er fullf�rt.\n"
-"Fjern oppstartsmediet og trykk return for � starte p� nytt.\n"
-"\n"
-"\n"
-"For informasjon om endringer som er tilgjengelige for denne utgaven av "
-"Mandrake Linux,\n"
-"sjekk errataen tilgjengelig fra:\n"
-"\n"
-"\n"
-"http://www.mandrakelinux.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informasjon om konfigurering av systemet ditt finnes i post\n"
-"install-kapittelet i Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid "Generate auto install floppy"
-msgstr "Oppretter diskett for autoinstallasjon"
-
-#: ../../install_steps_interactive.pm_.c:1328
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Autoinstallasjonen kan v�re fullstendig automatisk\n"
-"hvis du �nsker det. Den vil da ta over harddisken!!\n"
-"(dette er for � installere p� en annen maskin)\n"
-"\n"
-"Du kanskje �nske � kj�re installasjonen omigjen.\n"
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Automated"
-msgstr "Automatisert"
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Replay"
-msgstr "Gj�r igjen"
-
-#: ../../install_steps_interactive.pm_.c:1336
-msgid "Save packages selection"
-msgstr "Lagre pakkevalg"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux installasjon %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> mellom elementer  | <Space> velger | <F12> neste skjerm "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu mangler"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "Konsollhjelper mangler"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Velg en fil"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avansert"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Grunnleggende"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Vennligst vent"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "D�rlig valg, pr�v igjen\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ditt valg? (standard %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Innganger du m� fylle:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ditt valg? (0/1, standard `%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Valg: `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button?"
-msgstr "�nsker du � klikke p� denne knappen? "
-
-#: ../../interactive_stdio.pm_.c:103
-msgid " enter `void' for void entry"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ditt valg? (standard `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Det er mange ting � velge fra (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Vennlig velg det f�rste nummeret av 10-range du �nsker � redigere,\n"
-"eller bare trykk Enter for � fortsette.\n"
-"Ditt valg? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Merk, et merke endret:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Re-submit"
-
-#: ../../keyboard.pm_.c:197 ../../keyboard.pm_.c:228
-msgid "Czech (QWERTZ)"
-msgstr "Tsjekkisk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:198 ../../keyboard.pm_.c:230
-msgid "German"
-msgstr "Tysk"
-
-#: ../../keyboard.pm_.c:199
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:200 ../../keyboard.pm_.c:237
-msgid "Spanish"
-msgstr "Spansk"
-
-#: ../../keyboard.pm_.c:201 ../../keyboard.pm_.c:238
-msgid "Finnish"
-msgstr "Finsk"
-
-#: ../../keyboard.pm_.c:202 ../../keyboard.pm_.c:239
-msgid "French"
-msgstr "Fransk"
-
-#: ../../keyboard.pm_.c:203 ../../keyboard.pm_.c:264
-msgid "Norwegian"
-msgstr "Norsk"
-
-#: ../../keyboard.pm_.c:204
-msgid "Polish"
-msgstr "Polsk"
-
-#: ../../keyboard.pm_.c:205 ../../keyboard.pm_.c:272
-msgid "Russian"
-msgstr "Russisk"
-
-#: ../../keyboard.pm_.c:207 ../../keyboard.pm_.c:274
-msgid "Swedish"
-msgstr "Svensk"
-
-#: ../../keyboard.pm_.c:208 ../../keyboard.pm_.c:289
-msgid "UK keyboard"
-msgstr "UK-tastatur"
-
-#: ../../keyboard.pm_.c:209 ../../keyboard.pm_.c:290
-msgid "US keyboard"
-msgstr "US-tastatur"
-
-#: ../../keyboard.pm_.c:211
-msgid "Albanian"
-msgstr "Albansk"
-
-#: ../../keyboard.pm_.c:212
-msgid "Armenian (old)"
-msgstr "Armensk (gammel)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Armenian (typewriter)"
-msgstr "Armensk (skrivemaskin)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Armenian (phonetic)"
-msgstr "Armensk (phon�tic)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjansk (latin)"
-
-#: ../../keyboard.pm_.c:221
-msgid "Belgian"
-msgstr "Belgisk"
-
-#: ../../keyboard.pm_.c:222
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgarsk (phonetic)"
-
-#: ../../keyboard.pm_.c:223
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarsk (BDS)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliansk (ABNT-2)"
-
-#: ../../keyboard.pm_.c:225
-msgid "Belarusian"
-msgstr "Belarusian"
-
-#: ../../keyboard.pm_.c:226
-msgid "Swiss (German layout)"
-msgstr "Sveisisk (tysk oppsett)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Swiss (French layout)"
-msgstr "Sveisisk (fransk oppsett)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Czech (QWERTY)"
-msgstr "Tsjekkisk (QWERTY)"
-
-#: ../../keyboard.pm_.c:231
-msgid "German (no dead keys)"
-msgstr "Tysk (ingen d�de taster)"
-
-#: ../../keyboard.pm_.c:232
-msgid "Danish"
-msgstr "Dansk"
-
-#: ../../keyboard.pm_.c:233
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norsk)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Svensk)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Estonian"
-msgstr "Estlandsk"
-
-#: ../../keyboard.pm_.c:240
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgisk (\"Russisk\" oppsett)"
-
-#: ../../keyboard.pm_.c:241
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgisk (\"Latinsk\" oppsett)"
-
-#: ../../keyboard.pm_.c:242
-msgid "Greek"
-msgstr "Gresk"
-
-#: ../../keyboard.pm_.c:243
-msgid "Hungarian"
-msgstr "Ungarsk"
-
-#: ../../keyboard.pm_.c:244
-msgid "Croatian"
-msgstr "Kroatisk"
-
-#: ../../keyboard.pm_.c:245
-msgid "Israeli"
-msgstr "Israelsk"
-
-#: ../../keyboard.pm_.c:246
-msgid "Israeli (Phonetic)"
-msgstr "Israelsk (Phonetic)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Iranian"
-msgstr "Iransk"
-
-#: ../../keyboard.pm_.c:248
-msgid "Icelandic"
-msgstr "Islansk"
-
-#: ../../keyboard.pm_.c:249
-msgid "Italian"
-msgstr "Italiensk"
-
-#: ../../keyboard.pm_.c:251
-msgid "Japanese 106 keys"
-msgstr "Japansk 106 taster"
-
-#: ../../keyboard.pm_.c:254
-msgid "Korean keyboard"
-msgstr "Koreansk tastatur"
-
-#: ../../keyboard.pm_.c:255
-msgid "Latin American"
-msgstr "Latinamerikansk"
-
-#: ../../keyboard.pm_.c:256
-msgid "Lithuanian AZERTY (old)"
-msgstr "Liauisk AZERTY (gammel)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Lithuanian AZERTY (new)"
-msgstr "Liauisk AZERTY (ny)"
-
-#: ../../keyboard.pm_.c:259
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauisk \"nummer-rekke\" QWERTY"
-
-#: ../../keyboard.pm_.c:260
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauisk \"phon�tic\" QWERTY"
-
-#: ../../keyboard.pm_.c:261
-msgid "Latvian"
-msgstr "Lotvisk"
-
-#: ../../keyboard.pm_.c:262
-msgid "Macedonian"
-msgstr "Makedonsk"
-
-#: ../../keyboard.pm_.c:263
-msgid "Dutch"
-msgstr "Hollansk"
-
-#: ../../keyboard.pm_.c:265
-msgid "Polish (qwerty layout)"
-msgstr "Polsk (qwerty oppsett)"
-
-#: ../../keyboard.pm_.c:266
-msgid "Polish (qwertz layout)"
-msgstr "Polsk (qwertz oppsett)"
-
-#: ../../keyboard.pm_.c:267
-msgid "Portuguese"
-msgstr "Portugisisk"
-
-#: ../../keyboard.pm_.c:268
-msgid "Canadian (Quebec)"
-msgstr "Canadisk (Quebec)"
-
-#: ../../keyboard.pm_.c:270
-msgid "Romanian (qwertz)"
-msgstr "Romansk (qwertz)"
-
-#: ../../keyboard.pm_.c:271
-msgid "Romanian (qwerty)"
-msgstr "Romansk (qwerty)"
-
-#: ../../keyboard.pm_.c:273
-msgid "Russian (Yawerty)"
-msgstr "Russisk (Yawerty)"
-
-#: ../../keyboard.pm_.c:275
-msgid "Slovenian"
-msgstr "Slovensk"
-
-#: ../../keyboard.pm_.c:276
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakisk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:277
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakisk (QWERTY)"
-
-#: ../../keyboard.pm_.c:279
-msgid "Serbian (cyrillic)"
-msgstr "Serbisk (cyrillic)"
-
-#: ../../keyboard.pm_.c:281
-msgid "Tamil"
-msgstr "Tamilsk"
-
-#: ../../keyboard.pm_.c:282
-msgid "Thai keyboard"
-msgstr "Thai-tastatur"
-
-#: ../../keyboard.pm_.c:284
-msgid "Tajik keyboard"
-msgstr "Tajik-tastatur"
-
-#: ../../keyboard.pm_.c:285
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tyrkisk (tradisjonell \"F\" modell)"
-
-#: ../../keyboard.pm_.c:286
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tyrkisk (moderne \"Q\" modell)"
-
-#: ../../keyboard.pm_.c:288
-msgid "Ukrainian"
-msgstr "Ukrainsk"
-
-#: ../../keyboard.pm_.c:291
-msgid "US keyboard (international)"
-msgstr "US-tastatur (internasjonal)"
-
-#: ../../keyboard.pm_.c:292
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamesisk \"nummer-rekke\" QWERTY"
-
-#: ../../keyboard.pm_.c:293
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavisk (latin)"
-
-#: ../../keyboard.pm_.c:301
-msgid "Right Alt key"
-msgstr "H�yre Alt tast"
-
-#: ../../keyboard.pm_.c:302
-msgid "Both Shift keys simultaneously"
-msgstr "Begge Shift taster samtidig"
-
-#: ../../keyboard.pm_.c:303
-msgid "Control and Shift keys simultaneously"
-msgstr "Control og Shift taster samtidig"
-
-#: ../../keyboard.pm_.c:304
-msgid "CapsLock key"
-msgstr "CapsLock tast"
-
-#: ../../keyboard.pm_.c:305
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl og Alt taster samtidig"
-
-#: ../../keyboard.pm_.c:306
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt og Shift taster samtidig"
-
-#: ../../keyboard.pm_.c:307
-msgid "\"Menu\" key"
-msgstr "\" Menu\" tast"
-
-#: ../../keyboard.pm_.c:308
-msgid "Left \"Windows\" key"
-msgstr "Venstre \"Windows\" tast"
-
-#: ../../keyboard.pm_.c:309
-msgid "Right \"Windows\" key"
-msgstr "H�yre \"Windows\" tast"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Rund monterer %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Fjern de logiske partisjoner f�rst\n"
-
-#: ../../modules.pm_.c:832
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA st�tte eksisterer ikke lengre for 2.2 kjerner. Vennligst bruk en 2.4 "
-"kernel."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - mus"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generisk PS2 hjulmus"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 knapp"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generisk 2-knappers mus"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generisk"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Hjul"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriell"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generisk 3-knappers mus"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC-seriene (seriell)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM-seriene"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (seriell, gammel C7 type)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "bussmus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 knapper"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 knapper"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ingen"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Ingen mus"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Vennligst test musen."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "For � aktivere musen,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEVEG HJULET DITT!"
-
-#: ../../my_gtk.pm_.c:666
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:701
-msgid "Finish"
-msgstr "Avslutt"
-
-#: ../../my_gtk.pm_.c:701 ../../printerdrake.pm_.c:1590
-msgid "Next ->"
-msgstr "Neste ->"
-
-#: ../../my_gtk.pm_.c:702 ../../printerdrake.pm_.c:1588
-msgid "<- Previous"
-msgstr "<- Forrige"
-
-#: ../../my_gtk.pm_.c:1034
-msgid "Is this correct?"
-msgstr "Er dette riktig?"
-
-#: ../../my_gtk.pm_.c:1098 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../my_gtk.pm_.c:1119
-msgid "Expand Tree"
-msgstr "Utvid tre"
-
-#: ../../my_gtk.pm_.c:1120
-msgid "Collapse Tree"
-msgstr "Trekk sammen tre"
-
-#: ../../my_gtk.pm_.c:1121
-msgid "Toggle between flat and group sorted"
-msgstr "Skift mellom flat og gruppesortert"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Koble opp mot Internett"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Den mest vanlige m�ten � koble opp med adsl er pppoe.\n"
-"Noen oppkoblinger bruker pptp, noen f� bruker dhcp.\n"
-"Hvis du ikke vet, velg 'bruk pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "bruk dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "bruk pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "bruk pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Hvilken dhcp klient �nsker du � bruke?\n"
-"Standard er dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ikke noe ethernet nettverksadapter har blitt oppdaget i systemet ditt.\n"
-"Jeg kan ikke sette opp denne tilkoblingstypen."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:248
-msgid "Choose the network interface"
-msgstr "Velg nettverksgrensesnitt"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Vennligst velg hvilket nettverksadapter du �nsker � bruke til � koble opp\n"
-"mot Internett"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ingen nettverkskort funnet"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:364
-msgid "Configuring network"
-msgstr "Konfigurerer nettverk"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Vennligst entre vertsnavnet ditt hvis du vet det.\n"
-"Noen DHCP tjenere trenger vertsnavnet for � virke.\n"
-"Vertsnavnet ditt b�r v�re et full-kvalifisert vertsnavn,\n"
-"som ``minboks.mittlab.mittfirma.no''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:369
-msgid "Host name"
-msgstr "Vertsnavn"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:179
-#: ../../network/netconnect.pm_.c:206 ../../network/netconnect.pm_.c:229
-#: ../../network/netconnect.pm_.c:237
-msgid "Network Configuration Wizard"
-msgstr "Nettverkskonfigurasjonveiviser"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Eksternt ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Internt ISDN-kort"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Hva slags type er ISDN-tilknytningen din?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Hvilken ISDN konfigurering foretrekker du?\n"
-"\n"
-"* Den gamle konfigurasjoen bruker isdn4net. Det har kraftfulle\n"
-"  verkt�y, den det er vanskelig � konfigurere for en nybegynner,\n"
-"  og er ikke standardbasert.\n"
-"\n"
-"' Det nye konfigurasjonsverkt�yet er enklere � forst�,\n"
-"  mer standardisert, men med f�rre verkt�y.\n"
-"\n"
-"Vi anbefaler den nye konfigurasjonen.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Ny konfigurasjon (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Gamle konfigurasjonen (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN-konfigurasjon"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Velg din tilbyder.\n"
-" Hvis denne ikke er i listen, velg ikke i listen"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europaprotokollen"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europaprotokollen (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokoll for resten av verden"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Resten av verden \n"
-" ingen D-kanal (leid linje)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use?"
-msgstr "Hvilken protokoll �nsker du � bruke?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Hva slags kort har du?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Jeg vet ikke"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Hvis du har et ISA kort burde verdiene i neste bilde v�re riktige.\n"
-"\n"
-"Hvis du har et PCMCIA kort m� du vite irq og io for kortet.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Avbryt"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Fortsett"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card?"
-msgstr "Hvilket er ditt ISDN-kort?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"Jeg har oppdaget et ISDN PCI-kort, men jeg vet ikke hviklet type. Vennligst "
-"velg et PCI-kort i neste skjermbilde."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ingen ISDN PCI-kort funnet. Vennligst velg et i neste skjermbilde."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Vennligst velg hvilken serieport modemet ditt koblet til."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opsjoner oppringt"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Navn tilknytning"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonnummer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Scriptbasert"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminalbasert"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domenenavn"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "F�rste DNS-tjener (valgfri)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Andre DNS-tjener (valgfri)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan koble ned eller rekonfigurere tilkoblingen din."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan rekonfigurere tilkoblingen din."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Du er for �yeblikket koblet opp mot Internett"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan koble opp mot Internett eller rekonfigurere tilkoblingen din."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Du er for �yeblikket ikke koblet opp mot Internett."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Koble til"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Koble fra"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Konfigurer tilkoblingen"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internett tilkobling & konfigurasjon"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Vi skal n� konfigurere din  %s tilkobling."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Vi skal n� konfigurere %s oppkoblingen.\n"
-"\n"
-"\n"
-"Trykk OK for � begynne."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:256
-#: ../../network/netconnect.pm_.c:276 ../../network/tools.pm_.c:63
-msgid "Network Configuration"
-msgstr "Nettverkskonfigurasjon"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Fordi du holder p� med en nettverksinstallasjon er ditt "
-"nettverksoppsettallerede konfigurert.\n"
-"Trykk OK for � beholde din eksisterende konfigurasjon, eller avbryt for � "
-"rekonfigurere din internett og nettverkskonfigurasjon.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Velkommen til nettverkskonfigurasjon hjelperen\n"
-"\n"
-"Vi skal n� konfigurere din internett/nettverksoppkobling.\n"
-"Hvis du ikke �nsker � bruke automatisk oppdagelse, fjern krysset\n"
-"i boksen.\n"
-
-#: ../../network/netconnect.pm_.c:171
-msgid "Choose the profile to configure"
-msgstr "Velg profilen som skal konfigureres"
-
-#: ../../network/netconnect.pm_.c:172
-msgid "Use auto detection"
-msgstr "Bruk automatisk detektering"
-
-#: ../../network/netconnect.pm_.c:179 ../../printerdrake.pm_.c:145
-msgid "Detecting devices..."
-msgstr "Finner enheter..."
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "Normal modem connection"
-msgstr "Normal modemtilkobling"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, c-format
-msgid "detected on port %s"
-msgstr "oppdaget p� port %s"
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-msgid "ISDN connection"
-msgstr "ISDN-tilkobling"
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-#, c-format
-msgid "detected %s"
-msgstr "oppdaget %s"
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-msgid "ADSL connection"
-msgstr "ADSL oppkobling"
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-#, c-format
-msgid "detected on interface %s"
-msgstr "oppdaget p� grensesnitt %s"
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-msgid "Cable connection"
-msgstr "Kabeltilkobling"
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-msgid "cable connection detected"
-msgstr "Kabeltilkobling detektert"
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "LAN connection"
-msgstr "Lokalt nettverksoppkobling"
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "ethernet card(s) detected"
-msgstr "oppdaget ethernettkort"
-
-#: ../../network/netconnect.pm_.c:206
-msgid "Choose the connection you want to configure"
-msgstr "Velg oppkoblingen du �nsker � konfigurere"
-
-#: ../../network/netconnect.pm_.c:230
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Du har konfigureret flere m�ter � koble deg mot internett p�.\n"
-"Venligst velg den du �nsker � bruker.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:231
-msgid "Internet connection"
-msgstr "Internett tilkobling"
-
-#: ../../network/netconnect.pm_.c:237
-msgid "Do you want to start the connection at boot?"
-msgstr "�nsker du � starte tilkoblingen din ved oppstart?"
-
-#: ../../network/netconnect.pm_.c:251
-msgid "Network configuration"
-msgstr "Nettverkskonfigurasjon"
-
-#: ../../network/netconnect.pm_.c:252
-msgid "The network needs to be restarted"
-msgstr "Nettverket m� startes p� nytt"
-
-#: ../../network/netconnect.pm_.c:256
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Et problem oppsto ved omstart av nettverket: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gratulerer, internett og nettverkskonfigurasjonen er fullf�rt.\n"
-"\n"
-"Konfigurasjonen vil n� bli aktivert.\n"
-
-#: ../../network/netconnect.pm_.c:270
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Etter at det er ferding, anbefaler vi at du restarter X\n"
-"slik at du unng�r problemer med at vertsnavnet forandres."
-
-#: ../../network/netconnect.pm_.c:271
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Det oppsto problemer under konfigurasjon.\n"
-"Test tilkoblingen din via net_monitor eller mcc. Hvis tilkoblingen din ikke "
-"virker, �nsker du kanskje � kj�re konfigureringen p� nytt"
-
-#: ../../network/network.pm_.c:293
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ADVARSEL: Denne enheten har tidligere blitt konfigurert til � koble opp mot "
-"Internett.\n"
-"Trykk OK for � beholde enhetens konfigurasjon.\n"
-"Modifisering av feltene nedenfor vil overskrive denne konfigurasjonen."
-
-#: ../../network/network.pm_.c:298
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Vennligst entre IP-konfigurasjonen for denne maskinen.\n"
-"Hvert element b�r entres som en IP-adresse i punkt-desimal\n"
-"notasjon (f.eks, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:308 ../../network/network.pm_.c:309
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurerer nettverksenhet %s"
-
-#: ../../network/network.pm_.c:309
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:311 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-adresse"
-
-#: ../../network/network.pm_.c:312 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Nettmaske"
-
-#: ../../network/network.pm_.c:313
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:313
-msgid "Automatic IP"
-msgstr "Automatisk IP"
-
-#: ../../network/network.pm_.c:314
-#, fuzzy
-msgid "Start at boot"
-msgstr "Startet ved oppstart"
-
-#: ../../network/network.pm_.c:335 ../../printerdrake.pm_.c:714
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adresse b�r v�re i format 1.2.3.4"
-
-#: ../../network/network.pm_.c:365
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Vennligst entre vertsnavnet ditt.\n"
-"Vertsnavnet ditt b�r v�re et full-kvalifisert vertsnavn,\n"
-"s� som ``minboks.mittlab.mittfirma.no''.\n"
-"Du kan ogs� entre IP-adressen til gateway'en hvis du har en"
-
-#: ../../network/network.pm_.c:370
-msgid "DNS server"
-msgstr "DNS-tjener"
-
-#: ../../network/network.pm_.c:371
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (f.eks. %s)"
-
-#: ../../network/network.pm_.c:373
-msgid "Gateway device"
-msgstr "Gateway-enhet"
-
-#: ../../network/network.pm_.c:385
-msgid "Proxies configuration"
-msgstr "Konfigurasjon proxy"
-
-#: ../../network/network.pm_.c:386
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
-
-#: ../../network/network.pm_.c:387
-msgid "FTP proxy"
-msgstr "FTP-proxy"
-
-#: ../../network/network.pm_.c:388
-msgid "Track network card id (useful for laptops)"
-msgstr "Spor id nettverkskort (nyttig for b�rbare)"
-
-#: ../../network/network.pm_.c:391
-msgid "Proxy should be http://..."
-msgstr "Proxy burde v�re http://..."
-
-#: ../../network/network.pm_.c:392
-msgid "Proxy should be ftp://..."
-msgstr "Proxy burde v�re ftp://..."
-
-#: ../../network/tools.pm_.c:41
-msgid "Internet configuration"
-msgstr "Internett-konfigurasjon"
-
-#: ../../network/tools.pm_.c:42
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Vil du pr�ve � koble opp mot Internett n�?"
-
-#: ../../network/tools.pm_.c:46 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Tester tilkoblingen din..."
-
-#: ../../network/tools.pm_.c:56
-msgid "The system is now connected to Internet."
-msgstr "Systemet er n� koblet opp mot Internett."
-
-#: ../../network/tools.pm_.c:57
-msgid "For security reason, it will be disconnected now."
-msgstr "Av sikkerhetsgrunner vil den bli frakoblet n�."
-
-#: ../../network/tools.pm_.c:58
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Det ser ikke ut til at systemet er koblet til Internett.\n"
-"Pr�v � rekonfigurere tilkoblingen din."
-
-#: ../../network/tools.pm_.c:82
-msgid "Connection Configuration"
-msgstr "Konfigurasjon tilknytning."
-
-#: ../../network/tools.pm_.c:83
-msgid "Please fill or check the field below"
-msgstr "Vennnligst fyll eller merk feltet under"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kort IRQ"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kort mem (DMA)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kort IO"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kort IO_0"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kort IO_1"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Ditt telefonnummer"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Navn tilbyder (f.eks. tilbyder.net)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefonnummer tilbyder"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Tilbyder dns 1 (valgfri)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Tilbyder dns 2 (valgfri)"
-
-#: ../../network/tools.pm_.c:95
-msgid "Choose your country"
-msgstr "Velg land"
-
-#: ../../network/tools.pm_.c:96 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Oppringningsmodus"
-
-#: ../../network/tools.pm_.c:97 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Oppkoblingshastighet"
-
-#: ../../network/tools.pm_.c:98 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Oppkoblingens timout (i sekunder)"
-
-#: ../../network/tools.pm_.c:99 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Logg inn (brukernavn)"
-
-#: ../../network/tools.pm_.c:100 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Passord"
-
-#: ../../network/tools.pm_.c:118
-msgid "United Kingdom"
-msgstr ""
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montering mislykket: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Utvidet partisjon ikke st�ttet p� denne plattformen"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Du har et hull i partisjonstabellen din, men jeg kan ikke bruke det.\n"
-"Den eneste l�sningen er � flytte prim�rpartisjonene dine for � ha hullet ved "
-"siden av de utvidede partisjonene"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Gjenoppretting fra fil %s mislykket: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "D�rlig sikkerhetskopi-fil"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Feil ved skriving til fil %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Noe som ikke er bra skjer med disken din. \n"
-"En test for � sjekke dataintegritet var mislykket. \n"
-"Dette betyr at � skrive noe til disken vil av og til ende opp som ubrukelig"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "m� ha"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "viktig"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "veldig bra"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bra"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "kanskje"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokal skriver"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Fjern-skriver"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Skriver p� fjern-CUPS tjener"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:736
-msgid "Printer on remote lpd server"
-msgstr "Skriver p� fjern-lpd tjener"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Nettverksskriver (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Skriver p� SMB/Windows 95/98/NT server"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Skriver p� en NetWare tjener"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:740
-msgid "Enter a printer device URI"
-msgstr "Skriverenhetens URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Pipe inn i kommando"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2733
-msgid "Unknown model"
-msgstr "Ukjent modell"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokale skrivere"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Fjern-skrivere"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " p� parallelport \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB skriver \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", multifunksjonsenhet p� parallelport \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", multifunksjonsenhet p� USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multifunksjonsenhet p� HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", multifunksjonsenhet"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", skriver til %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "p� LPD tjener \"%s\", skriver \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP vert \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "p� Windows tjener \"%s\", del \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "p� Novell tjener \"%s\", skriver \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", bruker kommando %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1138
-msgid "Raw printer (No driver)"
-msgstr "R� skriver (ingen driver)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(p� %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(p� denne maskin)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "P� CUPS tjener \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2394
-#: ../../printerdrake.pm_.c:2405 ../../printerdrake.pm_.c:2621
-#: ../../printerdrake.pm_.c:2673 ../../printerdrake.pm_.c:2700
-#: ../../printerdrake.pm_.c:2870 ../../printerdrake.pm_.c:2872
-msgid " (Default)"
-msgstr " (Standard)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Velg skrivertilkobling"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hvordan er skriveren tilkoblet?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Skrivere p� fjern CUPS tjenere trenger du ikke � konfigurere her; disse "
-"skriverene vil bli oppdaget automatisk."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2457
-msgid "CUPS configuration"
-msgstr "CUPS konfigurasjon"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2458
-msgid "Specify CUPS server"
-msgstr "Spesifiser CUPS tjener"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"For � f� tilgang til fjern CUPS-tjenere i ditt lokale nettverk trenger du "
-"ikke � konfigurere noen ting; CUPS-tjenerene informerer maskinen din "
-"automatisk om skriverene. Alle skriverene som f�r �yeblikket er kjent for "
-"maskinen din er listet i \"Remote printers\" seksjonen i hovedvinduet til "
-"Printerdrake. N�r CUPS-tjeneren din ikke er i ditt lokale nettverk, m� du "
-"entre CUPS-tjenerens IP-adresse og evnt. portnummeret for � f� skriver- "
-"informasjon fra tjeneren, ellers la disse feltene v�re tomme."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalt er CUPS konfigurert automatisk ihht. til nettverksmilj�et ditt, s� "
-"du kan ha tilgang til skrivere p� CUPS-tjenerene i ditt lokale nettverk. "
-"Hvis dette ikke virker ordentlig, skru av \"Automatic CUPS configuration\" "
-"og rediger filen /etc/cups/cupsd.conf manuelt. Ikke glem � starte CUPS p� "
-"nytt etterp� (kommando: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adresse b�r v�re i format 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:864
-msgid "The port number should be an integer!"
-msgstr "Portnummer burde v�re numerisk"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS tjener IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:857
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatisk CUPS konfigurasjon"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Test porter"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2440
-#: ../../printerdrake.pm_.c:2559
-msgid "Add a new printer"
-msgstr "Legg til en ny skriver"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Velkommen til Skriverveiviseren\n"
-"\n"
-"Denne veiviseren lar deg installere lokale eller fjernskrivere som kan bli "
-"brukt fra denne maskin, og ogs� fra andre maskiner i nettverket.\n"
-"\n"
-"Den sp�r etter all n�dvendig informasjon for � sette opp skriveren og gir "
-"deg tilgang til alle tilgjengelige skriverdrivere, drivervalg og skriver "
-"tilkoblinger."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokal skriver"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Velkommen til skriverveiviseren\n"
-"\n"
-"Den veiviseren vil la deg installere din(e) skriver(e) som er tilkoblet "
-"denne maskin.\n"
-"\n"
-"Vennligt koble skriveren(e) til maskinen og skru dem p�. Klikk p� \"neste\" "
-"n�r du er klar, og p� \"avbryt\" hvis du ikke �nsker � sette opp skrivere "
-"n�.\n"
-"\n"
-"Merk at noen datamaskiner kan kr�sje under skriver autooppdating, skru av "
-"\"autodetekter skrivere\" for � installere skrivere uten autodetektering. "
-"Bruk \"ekspertmodus\" til printerdrake n�r du �nsker � sette opp utskrift p� "
-"en fjernskriver og printerdrake ikke lister den automatisk."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Finn skrivere automatisk"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Gratulerer, din skriver er n� installert og konfigurert!\n"
-"\n"
-"Du kan skrive ut med \"Skriv ut\" kommandoen til ditt program (vanligvis i "
-"\"Fil\" menyen).\n"
-"\n"
-"Hvis du �nsker � legge til, fjerne, eller gi en skriver ett nytt navn, eller "
-"vis du �nsker � gj�re om standard valg (papir, utskriftkvalitet, .....), "
-"velg \"Skriver\" i \"Hardware\" delen av Mandrake Control Center."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatisk detektering av skrivere"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Utf�r automatisk detektering"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Sett opp skriver manuellt"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Oppdaget %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Skriver p� parallelport \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB skriver \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Ingen lokal skriver funnet! For manuelt � installere en skriver entre et "
-"enhets-navn/filnavn i input-linjen (Parallelporter: /dev/lp0, /dev/lp1, ..., "
-"lik LPT1:, LPT2:, ..., 1st USB skriver: /dev/usb/lp0, 2nd USB skriver: /dev/"
-"usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Du m� legge til en enhet eller et filnavn!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Ingen lokal skriver funnet!\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Nettverksskrivere kan bare installeres etter installasjonen. Velg \"Hardware"
-"\" og s� \"Printer\" i Mandrake Control Center."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Vennligst velg en port hvor skriveren din er tilkoblet eller entre en enhet "
-"navn/filnavn i input-linjen"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Vennligst velg porten hvor skriveren din er koblet til."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Parallelporter: /dev/lp0, /dev/lp1, ..., lik LPT1:, LPT2:, ..., 1st USB "
-"skriver: /dev/usb/lp0, 2nd USB skriver: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Du m� velge/entre en skriver/enhet!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Manuell konfigurasjon"
-
-#: ../../printerdrake.pm_.c:467
-#, fuzzy
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, LaserJet "
-"1100/1200/1220/3200/3300 with scanner), an HP PhotoSmart P100 or 1315 or an "
-"HP LaserJet 2200?"
-msgstr ""
-"Er skriveren din en multifunksjonsenhet fra HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 med skanner)?"
-
-#: ../../printerdrake.pm_.c:484
-msgid "Installing HPOJ package..."
-msgstr "Installerer HPOJ pakke..."
-
-#: ../../printerdrake.pm_.c:489
-msgid "Checking device and configuring HPOJ..."
-msgstr "Sjekker enhet og konfigurer HPOJ ..."
-
-#: ../../printerdrake.pm_.c:507
-msgid "Installing SANE package..."
-msgstr "Installerer SANE pakke..."
-
-#: ../../printerdrake.pm_.c:519
-msgid "Scanning on your HP multi-function device"
-msgstr "Skanner p� din HP multifunksjonsenhet"
-
-#: ../../printerdrake.pm_.c:536
-msgid "Making printer port available for CUPS..."
-msgstr "Gj�r skriverport tilgjengelig for CUPS ..."
-
-#: ../../printerdrake.pm_.c:546 ../../printerdrake.pm_.c:1020
-#: ../../printerdrake.pm_.c:1134
-msgid "Reading printer database..."
-msgstr "Leser skriverdatabase  ..."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote lpd Printer Options"
-msgstr "Opsjoner for fjern-lpd skriver"
-
-#: ../../printerdrake.pm_.c:627
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"For � bruke en fjern-lpd skriverk�, m� du oppgi vertsnavnet til skriver- "
-"tjeneren og skrivernavnet p� denne tjeneren."
-
-#: ../../printerdrake.pm_.c:628
-msgid "Remote host name"
-msgstr "Fjern-vertsnavn"
-
-#: ../../printerdrake.pm_.c:629
-msgid "Remote printer name"
-msgstr "Fjern-skrivers navn"
-
-#: ../../printerdrake.pm_.c:632
-msgid "Remote host name missing!"
-msgstr "Det eksterne vertsnavnet mangler!"
-
-#: ../../printerdrake.pm_.c:636
-msgid "Remote printer name missing!"
-msgstr "Det eksterne vertsnavnet mangler!"
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opsjoner for SMB (Windows 9x/NT) skriver"
-
-#: ../../printerdrake.pm_.c:705
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"For � skrive til en SMB-skriver, m� du oppgi SMB-vertsnavnet (Merk! Dette "
-"kan v�re forskjellig fra dens TCP/IP-vertsnavn!) og muligens IP-adressen til "
-"skrivertjeneren, s� vel som det delte navnet til skriveren du �nsker tilgang "
-"til og anvendelige brukernavn, passord og arbeidsgruppeinformasjon."
-
-#: ../../printerdrake.pm_.c:706
-msgid "SMB server host"
-msgstr "SMB-tjener vert"
-
-#: ../../printerdrake.pm_.c:707
-msgid "SMB server IP"
-msgstr "SMB-tjener IP"
-
-#: ../../printerdrake.pm_.c:708
-msgid "Share name"
-msgstr "Navn deling"
-
-#: ../../printerdrake.pm_.c:711
-msgid "Workgroup"
-msgstr "Arbeidsgruppe"
-
-#: ../../printerdrake.pm_.c:718
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Servernavnet eller serverens IP m� oppgis!"
-
-#: ../../printerdrake.pm_.c:722
-msgid "Samba share name missing!"
-msgstr "Samba delenavn mangler!"
-
-#: ../../printerdrake.pm_.c:727
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:728
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:738
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:741
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-msgid "NetWare Printer Options"
-msgstr "NetWare skriveropsjoner"
-
-#: ../../printerdrake.pm_.c:804
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"For � skrive til en NetWare-skriver, m� du oppgi navnet til NetWare-"
-"skrivertjeneren (Mer! Dette kan v�re forskjellig fra dens TCP/IP-vertsnavn!) "
-"s� vel som navnet p� skriverk�en til skriveren du �nsker adgang til og "
-"anvendelige brukernavn og passord."
-
-#: ../../printerdrake.pm_.c:805
-msgid "Printer Server"
-msgstr "Skrivertjener"
-
-#: ../../printerdrake.pm_.c:806
-msgid "Print Queue Name"
-msgstr "Skriverk�-navn"
-
-#: ../../printerdrake.pm_.c:811
-msgid "NCP server name missing!"
-msgstr "NCP servernavn mangler!"
-
-#: ../../printerdrake.pm_.c:815
-msgid "NCP queue name missing!"
-msgstr "NCP k�navn mangler!"
-
-#: ../../printerdrake.pm_.c:854
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket skrivervalg"
-
-#: ../../printerdrake.pm_.c:855
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"For � skrive til en TCP eller socket skriver, m� du oppgi vertsnavnet til "
-"skriveren, og eventuelt portnummeret. P� HP JetDirect tjenere er "
-"portnummeret vanligvis 9100, p� andre tjenere kan dette variere. Sjekk "
-"manualen til maskinvaren din."
-
-#: ../../printerdrake.pm_.c:856
-msgid "Printer host name"
-msgstr "Skriverens vertsnavn"
-
-#: ../../printerdrake.pm_.c:860
-msgid "Printer host name missing!"
-msgstr "Skriverens vertsnavn mangler!"
-
-#: ../../printerdrake.pm_.c:889 ../../printerdrake.pm_.c:891
-msgid "Printer Device URI"
-msgstr "Skriverenhet URI"
-
-#: ../../printerdrake.pm_.c:890
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Du kan direkte oppgi URI til skriveren. URIen m� v�re i henhold til enten "
-"CUPS eller Foomatic standarden. Ikke alle typer URIer st�ttes av "
-"k�behandlerene."
-
-#: ../../printerdrake.pm_.c:905
-msgid "A valid URI must be entered!"
-msgstr "En korrekt URI m� oppgis!"
-
-#: ../../printerdrake.pm_.c:1006
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Alle skrivere trenger ett navn (f.eks. \"skriver\"). Beskrivelsen og "
-"lokalisasjonsfeltene trenger ikke � fylles inn. De er brukerkommentarer."
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Name of printer"
-msgstr "Navn p� skriver"
-
-#: ../../printerdrake.pm_.c:1008
-msgid "Description"
-msgstr "Beskrivelse"
-
-#: ../../printerdrake.pm_.c:1009
-msgid "Location"
-msgstr "Lokasjon"
-
-#: ../../printerdrake.pm_.c:1023
-msgid "Preparing printer database..."
-msgstr "Forbereder skriverdatabase ..."
-
-#: ../../printerdrake.pm_.c:1114
-msgid "Your printer model"
-msgstr "Din skrivermodell"
-
-#: ../../printerdrake.pm_.c:1115
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake har sammenlignet modellnavnet fra autooppdaging av skriveremed "
-"modellene oppgitt i skriverdatabasen for � finne beste match. match. Dette "
-"valget kan v�re feil, spesielt hvis skriveren din ikke er oppgitt i det hele "
-"tatt i databasen. Sjekk om valget er riktig og klikk \"Modellen er riktig\" "
-"hvis den er det eller hvis ikke, klikk \"Velg modell manuellt\" s� du kan "
-"velge skrivermodellen din manuellt i neste skjerm.\n"
-"\n"
-"Printerdrake har for skriveren din funnet:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1120 ../../printerdrake.pm_.c:1123
-msgid "The model is correct"
-msgstr "Modellen er riktig"
-
-#: ../../printerdrake.pm_.c:1121 ../../printerdrake.pm_.c:1122
-#: ../../printerdrake.pm_.c:1125
-msgid "Select model manually"
-msgstr "Velg modell manuellt"
-
-#: ../../printerdrake.pm_.c:1141
-msgid "Printer model selection"
-msgstr "Skrivervalg"
-
-#: ../../printerdrake.pm_.c:1142
-msgid "Which printer model do you have?"
-msgstr "Hva slags type skriver har du?"
-
-#: ../../printerdrake.pm_.c:1143
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Sjekk om Printerdrake gjorde autooppdagelsen av din skrivermodell riktig. "
-"S�k korrekt modell i listen n�r pekeren st�r over en feil modell eller p� "
-"\"R� skriver\"."
-
-#: ../../printerdrake.pm_.c:1146
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Hvis din skriver ikke finnes i listen velg en kompatibel (se i "
-"skrivermanualen) eller en lignende."
-
-#: ../../printerdrake.pm_.c:1222
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter konfigurasjon"
-
-#: ../../printerdrake.pm_.c:1223
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Du konfigurerer en OKI laser winprinter. Disse skriverene bruker en veldig\n"
-"spesiell kommunikasjonsprotokoll og virker derfor bare n�r de er koblet "
-"tilden f�rste parallelporten. N�r skriveren er koblet til en annen port "
-"eller til en skrivertjenerboks koble skriveren til den f�rste parallelporten "
-"f�r du skriver en testside. Ellers vil ikke skriveren virke. Innstillinger "
-"for oppkoblingstype vil bli ignorert av driveren."
-
-#: ../../printerdrake.pm_.c:1266 ../../printerdrake.pm_.c:1293
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet konfigurasjon"
-
-#: ../../printerdrake.pm_.c:1267
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkjet skriverdrivere fra Lexmark st�tter bare lokale skrivere, ingen "
-"skrivere p� fjernmaskiner eller skrivertjenerbokser. Koble skriveren til en "
-"lokal port eller konfigurer den p� maskinen hvor det er koblet til."
-
-#: ../../printerdrake.pm_.c:1294
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"For � kunne skrive med din Lexmark inkjet og denne konfigurasjonen, trenger "
-"du inkjet skriverdriverene fra Lexmark (http://www.lexmark.com/). G� til US "
-"web-stedet og klikk p� \"Drivers\" knappen. Velg s� din modell og etterp� "
-"\"Linux\" som operativsystem. Driveren kommer som RPM-pakker eller skall- "
-"skript med interaktiv grafisk installasjon. Du trenger ikke � gj�re denne "
-"konfigurasjonen fra det grafiske grensesnittet. Abryt direkte etter license "
-"agreement. Skriv s� skriverhode alignment sider med \"lexmarkmaintain\" og "
-"juster hode alignment innstillinger med dette programmet."
-
-#: ../../printerdrake.pm_.c:1510
-#, fuzzy
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Standardskriverens instillinger\n"
-"Du b�r sjekke at sidest�rrelsen og blekktypen\n"
-"er satt riktig. Merk deg at veldig god utskriftskvalitet\n"
-"kan gj�re utskriften treg."
-
-#: ../../printerdrake.pm_.c:1519
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Valg %s m� v�re ett helt tall!"
-
-#: ../../printerdrake.pm_.c:1523
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Valg %s m� v�re ett tall!"
-
-#: ../../printerdrake.pm_.c:1528
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Valg %s er utenfor rekkevidden!"
-
-#: ../../printerdrake.pm_.c:1567
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"�nsker du � sette denne skriveren (\"%s\")\n"
-"som standard skriver?"
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Test pages"
-msgstr "Testsider"
-
-#: ../../printerdrake.pm_.c:1585
-#, fuzzy
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Vennligst velg testsidene du �nsker � skrive ut.\n"
-"Merk deg, fototestsiden kan ta lang tid � skrive ut,\n"
-"og p� laserskrivere med for lite minne vil den ikke\n"
-"skrives ut i det hele tatt. Som regel vil det holde �\n"
-"skrive ut standard testside."
-
-#: ../../printerdrake.pm_.c:1589
-msgid "No test pages"
-msgstr "Ingen testsider"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Print"
-msgstr "Skriv ut"
-
-#: ../../printerdrake.pm_.c:1592
-msgid "Standard test page"
-msgstr "Standard testside"
-
-#: ../../printerdrake.pm_.c:1595
-msgid "Alternative test page (Letter)"
-msgstr "Alternativ testside (letter)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Alternative test page (A4)"
-msgstr "Alternativ testside (A4)"
-
-#: ../../printerdrake.pm_.c:1600
-msgid "Photo test page"
-msgstr "Fototestside"
-
-#: ../../printerdrake.pm_.c:1604
-msgid "Do not print any test page"
-msgstr "Ikke skriv ut noen testside"
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1749
-msgid "Printing test page(s)..."
-msgstr "Skriver ut testside(r)..."
-
-#: ../../printerdrake.pm_.c:1637
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testsiden(e) har blitt sendt til skriver-daemonen.\n"
-"Det kan ta litt tid f�r skriveren starter.\n"
-"Utskriftstatus:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1641
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testsiden(e) har blitt sendt til skriver-daemonen.\n"
-"Det kan ta litt tid f�r skriveren starter.\n"
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Did it work properly?"
-msgstr "Virker det som det skal?"
-
-#: ../../printerdrake.pm_.c:1669 ../../printerdrake.pm_.c:2735
-msgid "Raw printer"
-msgstr "R� skriver"
-
-#: ../../printerdrake.pm_.c:1687
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1689
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1692 ../../printerdrake.pm_.c:1708
-#: ../../printerdrake.pm_.c:1718
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1695 ../../printerdrake.pm_.c:1734
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1698
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1705 ../../printerdrake.pm_.c:1715
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1710 ../../printerdrake.pm_.c:1720
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"F�r � f� en liste over tilgjengelige valg for n�v�rende skriver klikk p� "
-"\"Print option list\" knappen."
-
-#: ../../printerdrake.pm_.c:1723
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"F�r � skrive ut en fil fra kommandolinjen (terminalvindu) bruk kommandoen \"%"
-"s <file>\" eller \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1727
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1731
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1740 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:1747 ../../printerdrake.pm_.c:1748
-#: ../../printerdrake.pm_.c:2719 ../../standalone/drakbackup_.c:743
-#: ../../standalone/drakbackup_.c:2448 ../../standalone/drakfont_.c:580
-#: ../../standalone/drakfont_.c:792
-msgid "Close"
-msgstr "Lukk"
-
-#: ../../printerdrake.pm_.c:1743 ../../printerdrake.pm_.c:1755
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Skriver ut/Skanner p� \"%s\""
-
-#: ../../printerdrake.pm_.c:1744 ../../printerdrake.pm_.c:1756
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Skriver ut p� skriver \"%s\""
-
-#: ../../printerdrake.pm_.c:1746
-msgid "Print option list"
-msgstr "Skriv ut liste over valg"
-
-#: ../../printerdrake.pm_.c:1768
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1775
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1797 ../../printerdrake.pm_.c:2224
-#: ../../printerdrake.pm_.c:2488
-msgid "Reading printer data..."
-msgstr "Leser skriverdata: ..."
-
-#: ../../printerdrake.pm_.c:1817 ../../printerdrake.pm_.c:1845
-#: ../../printerdrake.pm_.c:1880
-msgid "Transfer printer configuration"
-msgstr "Overf�r skriverkonfigurasjon"
-
-#: ../../printerdrake.pm_.c:1818
-#, fuzzy, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Du kan kopiere skriverkonfigurasjonen du har satt opp for k�tjeneren\n"
-"%s til %s, din n�v�rende k�tjener. All konfigurasjonsdata (skrivernavn,\n"
-"beskrivelse, tilkoblingstype og standardinstillinger) blir overtatt, men \n"
-"ikke jobber.\n"
-"Ikke alle k�er kan overf�res grunnet:\n"
-
-#: ../../printerdrake.pm_.c:1821
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS st�tter ikke skrivere p� Novelltjenere eller skrivere som sender "
-"dataene inn i en fritt formet kommando.\n"
-
-#: ../../printerdrake.pm_.c:1823
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ st�tter bare lokale skrivere, fjern-LPD skrivere, og Socket/TCP "
-"skrivere.\n"
-
-#: ../../printerdrake.pm_.c:1825
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD og LPRng st�tter ikke IPP skrivere.\n"
-
-#: ../../printerdrake.pm_.c:1827
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"I tillegg, k�er laget med dette programmet eller \"foomatic -configure\" kan "
-"ikke overflyttes."
-
-#: ../../printerdrake.pm_.c:1828
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Skrivere konfigurert med PPD filene som produsenten har laget eller med CUPS "
-"drivere ikke ikke overflyttes."
-
-#: ../../printerdrake.pm_.c:1829
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Velg skriverene som du vil overflytte og klikk\n"
-"\"Overf�r\"."
-
-#: ../../printerdrake.pm_.c:1832
-msgid "Do not transfer printers"
-msgstr "Ikke overf�r skrivere"
-
-#: ../../printerdrake.pm_.c:1833 ../../printerdrake.pm_.c:1850
-msgid "Transfer"
-msgstr "Overf�r"
-
-#: ../../printerdrake.pm_.c:1846
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"En skriver med navnet \"%s\" eksisterer allerede p� %s. \n"
-"Klikk \"Overf�r\" for � overskrive.\n"
-"Du kan ogs� gi ett nytt skrivernavn, eller hoppe over denne skriveren."
-
-#: ../../printerdrake.pm_.c:1854
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Skrivernavn b�r inneholde kun bokstaver, tall og understrek"
-
-#: ../../printerdrake.pm_.c:1859
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Skriveren \"%s\" eksisterer allerede,\n"
-"�nsker du � overskrive dens konfigurasjon?"
-
-#: ../../printerdrake.pm_.c:1867
-msgid "New printer name"
-msgstr "Nytt skrivernavn"
-
-#: ../../printerdrake.pm_.c:1870
-#, c-format
-msgid "Transferring %s..."
-msgstr "Overf�rer %s ..."
-
-#: ../../printerdrake.pm_.c:1881
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1890
-msgid "Refreshing printer data..."
-msgstr "Frisker opp skriverdata ..."
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1969
-#: ../../printerdrake.pm_.c:1981
-msgid "Configuration of a remote printer"
-msgstr "Konfigurasjon av en fjernskriver"
-
-#: ../../printerdrake.pm_.c:1899
-msgid "Starting network..."
-msgstr "Starter nettverk ..."
-
-#: ../../printerdrake.pm_.c:1933 ../../printerdrake.pm_.c:1937
-#: ../../printerdrake.pm_.c:1939
-msgid "Configure the network now"
-msgstr "Konfigurer nettverket n�"
-
-#: ../../printerdrake.pm_.c:1934
-msgid "Network functionality not configured"
-msgstr "Nettverksfunksjonalitet ikke konfigurert"
-
-#: ../../printerdrake.pm_.c:1935
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1938
-msgid "Go on without configuring the network"
-msgstr "Fortsett uten � konfigurere nettverket"
-
-#: ../../printerdrake.pm_.c:1971
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1972
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1982
-msgid "Restarting printing system..."
-msgstr "Starter skriversystemet p� nytt ..."
-
-#: ../../printerdrake.pm_.c:2020
-msgid "high"
-msgstr "h�y"
-
-#: ../../printerdrake.pm_.c:2020
-msgid "paranoid"
-msgstr "paranoid"
-
-#: ../../printerdrake.pm_.c:2021
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installerer et utskriftsystem p� %s sikkerhetsniv�et"
-
-#: ../../printerdrake.pm_.c:2022
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2054
-msgid "Starting the printing system at boot time"
-msgstr "Starter utskriftsystemet ved oppstart"
-
-#: ../../printerdrake.pm_.c:2055
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2078 ../../printerdrake.pm_.c:2116
-#: ../../printerdrake.pm_.c:2146 ../../printerdrake.pm_.c:2179
-#: ../../printerdrake.pm_.c:2284
-msgid "Checking installed software..."
-msgstr "Sjekker installert programvare..."
-
-#: ../../printerdrake.pm_.c:2120
-msgid "Removing LPRng..."
-msgstr "Fjerner LPRng..."
-
-#: ../../printerdrake.pm_.c:2150
-msgid "Removing LPD..."
-msgstr "Fjerner LPD..."
-
-#: ../../printerdrake.pm_.c:2208
-msgid "Select Printer Spooler"
-msgstr "Velg skrivertk�behandler"
-
-#: ../../printerdrake.pm_.c:2209
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hvilket utskriftsystem (spooler) �nsker du � bruke?"
-
-#: ../../printerdrake.pm_.c:2242
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Konfigurerer skriver \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2255
-msgid "Installing Foomatic..."
-msgstr "Installerer Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2312 ../../printerdrake.pm_.c:2351
-#: ../../printerdrake.pm_.c:2736 ../../printerdrake.pm_.c:2806
-msgid "Printer options"
-msgstr "Opsjoner for skriver"
-
-#: ../../printerdrake.pm_.c:2321
-msgid "Preparing PrinterDrake..."
-msgstr "Klargj�rer PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2338 ../../printerdrake.pm_.c:2893
-msgid "Configuring applications..."
-msgstr "Konfigurerer applikasjoner..."
-
-#: ../../printerdrake.pm_.c:2358
-msgid "Would you like to configure printing?"
-msgstr "�nsker du � konfigurere en skriver?"
-
-#: ../../printerdrake.pm_.c:2370
-msgid "Printing system: "
-msgstr "Utskriftssystem: "
-
-#: ../../printerdrake.pm_.c:2418
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2422
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Her er f�lgende skriverk�.\n"
-"Du kan legge til flere eller endre de eksisterende."
-
-#: ../../printerdrake.pm_.c:2423
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Her er f�lgende skriverk�.\n"
-"Du kan legge til flere eller endre de eksisterende."
-
-#: ../../printerdrake.pm_.c:2449
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Frisker opp skriverliste (for � vise alle tilgjengelige CUPS skrivere)"
-
-#: ../../printerdrake.pm_.c:2467
-msgid "Change the printing system"
-msgstr "Endrer utskriftssystemet"
-
-#: ../../printerdrake.pm_.c:2472 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normalt modus"
-
-#: ../../printerdrake.pm_.c:2628 ../../printerdrake.pm_.c:2678
-#: ../../printerdrake.pm_.c:2887
-msgid "Do you want to configure another printer?"
-msgstr "�nsker du � konfigurere enda en skriver?"
-
-#: ../../printerdrake.pm_.c:2714
-msgid "Modify printer configuration"
-msgstr "Modifiser skriverkonfigurasjon"
-
-#: ../../printerdrake.pm_.c:2716
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Skriver %s\n"
-"Hva �nsker du � forandre p� denne skriveren?"
-
-#: ../../printerdrake.pm_.c:2720
-msgid "Do it!"
-msgstr "Gj�r det!"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2780
-msgid "Printer connection type"
-msgstr "Skrivertilkoblingstype"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2784
-msgid "Printer name, description, location"
-msgstr "Skrivernavn, beskrivelse, sted"
-
-#: ../../printerdrake.pm_.c:2728 ../../printerdrake.pm_.c:2799
-msgid "Printer manufacturer, model, driver"
-msgstr "Skriverprodusent, modell, driver"
-
-#: ../../printerdrake.pm_.c:2729 ../../printerdrake.pm_.c:2800
-msgid "Printer manufacturer, model"
-msgstr "Skriverprodusent, modell"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2810
-msgid "Set this printer as the default"
-msgstr "Sett denne skriveren som standard"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2815
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Legg denne skriveren til Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2741 ../../printerdrake.pm_.c:2824
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Fjern denne skriveren fra Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2833
-msgid "Print test pages"
-msgstr "Skriver ut testsider"
-
-#: ../../printerdrake.pm_.c:2743 ../../printerdrake.pm_.c:2835
-msgid "Know how to use this printer"
-msgstr "Vet hvordan man skal bruke denne skriveren"
-
-#: ../../printerdrake.pm_.c:2745 ../../printerdrake.pm_.c:2837
-msgid "Remove printer"
-msgstr "Fjern skriver"
-
-#: ../../printerdrake.pm_.c:2789
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Fjerner gammel skriver \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2813
-msgid "Default printer"
-msgstr "Standardskriver"
-
-#: ../../printerdrake.pm_.c:2814
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Skriveren \"%s\" er n� satt til standard skriver."
-
-#: ../../printerdrake.pm_.c:2818 ../../printerdrake.pm_.c:2821
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Legger skriver til Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Skriveren \"%s\" ble vellykket lagt til Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2822
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2827 ../../printerdrake.pm_.c:2830
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2831
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2839
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "�nsker du virkelig � fjerne skriveren \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2841
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Fjerner skriver \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy-konfigurasjon"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Velkommen til proxy-konfigurasjonsverkt�yet.\n"
-"\n"
-"Her kan du sette opp dine http og ftp proxier\n"
-"med eller uten brukernavn og passord\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Vennligst fill ut med http proxy informasjon\n"
-"La feltet v�re hvis du ikke �nsker en http proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URLen b�r begynne med \"http:\""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Portnummer burde v�re numerisk"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Vennligst fyll ut ftp-proxy informasjonen-nLa feltet v�re hvis du ikke "
-"�nsker en ftp-proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URLen b�r begynne med \"ftp:\""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Vennligst skriv inn proxy brukernavn og passord, hvis det eksisterer.\n"
-"La det v�re hvis du ikke �nsker brukernavn/passord"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "brukernavn"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "passord"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "skriv inn passord p� nytt"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Passordene stemmer ikke overens. Pr�v igjen!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan ikke legge til en partisjon til _formattert_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan ikke skrive fil %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid mislykket"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid mislykket (kanskje raidtool mangler?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ikke nok partisjoner for RAID niv� %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystem"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron en periodisk kommandoplanlegger."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd blir brukt til overv�kning av batteristatus og logging av dette via "
-"syslog.\n"
-"Kan ogs� brukes til � sl� av maskinen n�r batteriet er d�rlig."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Kj�rer kommandoer planlagt av at kommandoen ved tidspunkt spesifisert n�r\n"
-"at ble kj�rt, og kj�rer batch kommandoer n�r lastingsmengden er lav nok."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron er et standard UNIX-program som kj�rer brukerspesifiserte programmer\n"
-"ved periodisk planlagte tider. vixie cron gir flere funksjoner til vanlig "
-"UNIX cron,\n"
-"inkludert bedre sikkerhet og mere kraftfulle konfigurasjonsopsjoner."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM gir musest�tte til tekstbaserte Linux applikasjoner som\n"
-"Midnight Commander. Den lar ogs� musebaserte konsoller foreta klipp-og-lim "
-"operasjoner,\n"
-"og inkluderer st�tte for pop-up menyer i konsollen."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake kj�rer et maskinvares�k, og kan konfigurere ny/endret\n"
-"maskinvare."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:414
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache er en World Wide Web tjener. Den blir brukt til � tjene HTML-filer\n"
-"og CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internett supertjenerdaemonen (vanligvis kalt inetd) starter\n"
-"varierende Internett-tjenester ettersom det trengs. Den er ansvarlig for � "
-"starte\n"
-"mange tjenester, inkludert telnet, ftp, rsh, og rlogin. Stopping av inetd "
-"stopper\n"
-"alle tjenestene den er ansvarlig for."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Start pakkefiltrering for Linux kjerne 2.2 serien for � sette\n"
-"opp en brannmur for � beskytte maskinen din fra nettverksangrep."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Denne pakken laster det valgte tastaturkartet som er satt i\n"
-"/etc/sysconfig/keyboard. Dette kan bli valgt ved bruk av kbdconfig "
-"verkt�yet.\n"
-"For de fleste maskiner b�r dette v�re aktivert."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatisk regenerering av kjernehode i /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "automatisk oppdagelse og konfigurering av maskinvare ved oppstart."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf vil noen ganger arrangere utf�relse av forskjellige\n"
-"oppgaver ved oppstart for � vedlikeholde systemkonfigurasjon."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd er skriverdaemonen som beh�ves for at lpr skal virke ordentlig. Den er\n"
-"i hovedsak en tjener som fordeler utskriftsjobber til skriveren(e)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, brukt for � bygge en tjener med h�y ytelse og\n"
-"tilgjengelighet."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:415
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) er en Domain Name Server (DNS) som brukes til � bestemme "
-"vertsnavn til IP-adresser."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monterer og demonterer alle Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), og NCP (NetWare) monteringspunkter."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiverer/deaktiverer alle nettverksgrensesnitt konfigurert til � starte\n"
-"ved oppstart."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS er en popul�r protokoll for fildeling over TCP/IP nettverk.\n"
-"Denne tjenesten tilbyr NFS-tjener funksjonalitet som er konfigurert via\n"
-"/etc/exports filen."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS er en popul�r protokoll for fildeling over TCP/IP nettverk.\n"
-"Denne tjenesten tilbyr NFS fill�sing funksjonalitet."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Sl�r automatisk p� numlock-tast i konsoll og XFree ved\n"
-"oppstart."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "St�tter OKI 4w og kompatible winskrivere."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA st�tte er vanligvis st�tte for ting som ethernet og\n"
-"modem i b�rbare PC'er. Den vil ikke starte uten konfigurasjon s� det er "
-"trygt\n"
-"� ha denne installert p� maskiner som ikke trenger det."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper h�ndterer RPC-tilknytninger, som brukes av protokoller\n"
-"som NFS og NIS. Portmap-tjeneren m� kj�res p� maskiner som brukes som\n"
-"tjenere for protokoller som bruker RPC-mekanismen."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:417
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix er en posttransporteringsagent, som er et program som flytter post "
-"fra en maskin til en annen."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Lagrer og gjenoppretter system entropy pool for h�yere kvalitet p�\n"
-"tilfeldig nummergenerering."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Tilordne r� enheter til blokkenheter (som harddisk-\n"
-"partisjoner) for bruk av applikasjoner som Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Den rutete daemonen tillater automatisk oppdatering av IP rutertabell via\n"
-"RIP-protokollen. Mens RIP er mye brukt p� sm� nettverk, trengs mere "
-"komplekse\n"
-"rutingprotokoller for komplekse nettverk."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokollen lar brukere p� et nettverk finne ytelses-\n"
-"metrikser for alle maskinene p� nettverket."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokollen lar brukere p� et nettverk identifisere hvem som\n"
-"er logget inn p� andre maskiner."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokollen lar fjernbrukere motta en liste over alle brukerne\n"
-"som er logget p� en maskin som kj�rer rwho-daemonen (lik finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Start lydsystemet p� maskinen din"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog er en fasilitet som mange daemoner bruker til � logge beskjeder\n"
-"til forskjellige systemloggfiler. Det er en god ide � alltid kj�re syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Last driverene for dine usb enheter."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Starter X-font tjeneren (dette er obligatorisk for at XFree skal kj�re)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Velg hvilke tjenester som skal startes automatisk ved oppstart"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Skriver ut"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internett"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Fildeling"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:923
-msgid "System"
-msgstr "System"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Fjernadministrasjon"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Databasetjener"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Tjenester: %d aktivert for %d registrert"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Tjenester"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "kj�rer"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "stoppet"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Tjenester og daemoner"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Ingen tilleggsinformasjon\n"
-"om denne tjenesten, begklager."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ved oppstart"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stopp"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Takk for at du valgte Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Velkommen til �pen kilde verdenen"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Protokoll for resten av verden"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internett og beskjeder"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia og grafikk"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Utvikling"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake kontrollpanel"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Brukergrensesnitt"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Tjenerprogramvare"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Spill"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Installerer pakke..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Jeg kan ikke lese partisjonstabellen din, den er for �delagt for meg :(\n"
-"Jeg vil f�rs�ke � blanke ut d�rlige partisjoner"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Feil!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Jeg kan ikke finne filen '%s' som jeg trenger."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Autoinstallasjonskonfigurering"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Du holder p� med � konfigurere en automatisk installasjonsdiskett. Denne "
-"muligheten erlitt farlig, og m� brukes forsiktig.\n"
-"\n"
-"Med denne muligeten vil du kunne kj�re installasjonen du gjennomf�rte p� "
-"denne maskinenp� nytt, med muligheten for � selv kunne forandre p� noen av "
-"instillingene.\n"
-"\n"
-"For maksimal sikkerhet vil partisjoneringen og formateringen aldri bli "
-"gjennomf�rt automatisk, uansett hva du valgte under installasjonen.\n"
-"\n"
-"�nsker du � fortsette?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Konfigurasjon av automatiske skritt"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Vennligst velg for hvert steg om det skal v�re som under installasjonen, "
-"eller manuelt"
-
-#: ../../standalone/drakautoinst_.c:83
-#, fuzzy
-msgid "Creating auto install floppy"
-msgstr "Oppretter diskett for autoinstallasjon"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:548
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratulerer!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketten har blitt generert.\n"
-"Du kan n� gjennomf�re installasjonen p� nytt."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Autoinstallering"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Legg til en enhet"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Fjern siste enhet"
-
-#: ../../standalone/drakbackup_.c:438
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:439
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:443
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:465
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:544 ../../standalone/drakbackup_.c:591
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:592 ../../standalone/drakbackup_.c:656
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "D�rlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:604
-#, fuzzy
-msgid "Backup User files..."
-msgstr "D�rlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:605
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:655
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "D�rlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:663
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-msgid ""
-"\n"
-" FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:676
-#, fuzzy
-msgid " Error during mail sending. \n"
-msgstr "Feil ved lesing av fil %s"
-
-#: ../../standalone/drakbackup_.c:717 ../../standalone/drakbackup_.c:728
-#: ../../standalone/drakbackup_.c:739 ../../standalone/drakfont_.c:788
-#, fuzzy
-msgid "File Selection"
-msgstr "Pakkevalg"
-
-#: ../../standalone/drakbackup_.c:744
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:779
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:780
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:781
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:782
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:783
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:784
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:801
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Vennligst velg pakkene du �nsker � installere."
-
-#: ../../standalone/drakbackup_.c:828
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:829 ../../standalone/drakbackup_.c:853
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:851 ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Fjern inngang"
-
-#: ../../standalone/drakbackup_.c:889
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Fjern Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:928
-#, fuzzy
-msgid "Users"
-msgstr "Brukernavn"
-
-#: ../../standalone/drakbackup_.c:954
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:957
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Vennligst test musen."
-
-#: ../../standalone/drakbackup_.c:962
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Vennligst pr�v igjen"
-
-#: ../../standalone/drakbackup_.c:972
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Vennligst pr�v igjen"
-
-#: ../../standalone/drakbackup_.c:978
-#, fuzzy
-msgid "Remember this password"
-msgstr "skriv inn passord p� nytt"
-
-#: ../../standalone/drakbackup_.c:1042 ../../standalone/drakbackup_.c:2038
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Lokalt nettverksoppkobling"
-
-#: ../../standalone/drakbackup_.c:1049 ../../standalone/drakbackup_.c:2046
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Velg skrivertilkobling"
-
-#: ../../standalone/drakbackup_.c:1075 ../../standalone/drakbackup_.c:2879
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1078 ../../standalone/drakbackup_.c:2883
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Vennligst velg tastatur-oppsettet ditt."
-
-#: ../../standalone/drakbackup_.c:1084 ../../standalone/drakbackup_.c:2895
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Vennligst klikk p� en partisjon"
-
-#: ../../standalone/drakbackup_.c:1090 ../../standalone/drakbackup_.c:2901
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1096
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Vennligst velg pakkene du �nsker � installere."
-
-#: ../../standalone/drakbackup_.c:1102
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1143
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "D�rlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:1146
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1152 ../../standalone/drakbackup_.c:1193
-#: ../../standalone/drakbackup_.c:2003
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1185 ../../standalone/drakbackup_.c:1995
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Vennligst test musen."
-
-#: ../../standalone/drakbackup_.c:1199 ../../standalone/drakbackup_.c:2009
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "D�rlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:1257
-#, fuzzy
-msgid "Network"
-msgstr "Nettverksgrensesnitt"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1287 ../../standalone/drakbackup_.c:1291
-#: ../../standalone/drakbackup_.c:1295
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1288 ../../standalone/drakbackup_.c:1292
-#: ../../standalone/drakbackup_.c:1295
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1289 ../../standalone/drakbackup_.c:1293
-#: ../../standalone/drakbackup_.c:1295
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1290 ../../standalone/drakbackup_.c:1294
-#: ../../standalone/drakbackup_.c:1295
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1302
-#, fuzzy
-msgid "Use daemon"
-msgstr "Brukernavn"
-
-#: ../../standalone/drakbackup_.c:1307
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Vennligst velg pakkene du �nsker � installere."
-
-#: ../../standalone/drakbackup_.c:1313
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Vennligst velg spr�k som skal brukes."
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Oppdaging av harddisk"
-
-#: ../../standalone/drakbackup_.c:1319
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Brukernavn"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1359
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1401
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1406
-#, fuzzy
-msgid "Where"
-msgstr "Hjul"
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "When"
-msgstr "Hjul"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "More Options"
-msgstr "Modulopsjoner:"
-
-#: ../../standalone/drakbackup_.c:1435 ../../standalone/drakbackup_.c:2791
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Nettverkskonfigurasjon"
-
-#: ../../standalone/drakbackup_.c:1453
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Vennligst velg pakkene du �nsker � installere."
-
-#: ../../standalone/drakbackup_.c:1455
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1466
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1530
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Vennligst velg pakkene du �nsker � installere."
-
-#: ../../standalone/drakbackup_.c:1531
-#, fuzzy
-msgid "Backup system"
-msgstr "Oppsett filsystemer"
-
-#: ../../standalone/drakbackup_.c:1532
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1535
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1617
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1618
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1620
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1622
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1624
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1625
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1626
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Valg"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1629
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1631
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1633
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1743
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1745
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Vennligst velg hvilken serieport modemet ditt koblet til."
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1776
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1777
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1876
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Nettverkskonfigurasjon"
-
-#: ../../standalone/drakbackup_.c:1894
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1912
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1962
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "D�rlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:1964
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Vennligst velg din musetype."
-
-#: ../../standalone/drakbackup_.c:1992
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "D�rlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:2073
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2075
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2133
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Vennligst velg din musetype."
-
-#: ../../standalone/drakbackup_.c:2135
-#, fuzzy
-msgid "Other Media"
-msgstr "Andre"
-
-#: ../../standalone/drakbackup_.c:2141
-#, fuzzy
-msgid "Restore system"
-msgstr "Installer systemet"
-
-#: ../../standalone/drakbackup_.c:2142
-msgid "Restore Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Restore Other"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2149
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2150
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2207
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2215
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Skreddersydd"
-
-#: ../../standalone/drakbackup_.c:2256 ../../standalone/drakbackup_.c:2281
-#: ../../standalone/drakbackup_.c:2302 ../../standalone/drakbackup_.c:2323
-#: ../../standalone/drakbackup_.c:2341 ../../standalone/drakbackup_.c:2373
-#: ../../standalone/drakbackup_.c:2389 ../../standalone/drakbackup_.c:2409
-#: ../../standalone/drakbackup_.c:2428 ../../standalone/drakbackup_.c:2450
-#: ../../standalone/drakfont_.c:578
-msgid "Help"
-msgstr "Hjelp"
-
-#: ../../standalone/drakbackup_.c:2259 ../../standalone/drakbackup_.c:2286
-#: ../../standalone/drakbackup_.c:2305 ../../standalone/drakbackup_.c:2326
-#: ../../standalone/drakbackup_.c:2344 ../../standalone/drakbackup_.c:2392
-#: ../../standalone/drakbackup_.c:2412 ../../standalone/drakbackup_.c:2431
-msgid "Previous"
-msgstr "Forrige"
-
-#: ../../standalone/drakbackup_.c:2261 ../../standalone/drakbackup_.c:2328
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Status"
-
-#: ../../standalone/drakbackup_.c:2307
-#, fuzzy
-msgid "Build Backup"
-msgstr "D�rlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:2346 ../../standalone/drakbackup_.c:3023
-#, fuzzy
-msgid "Restore"
-msgstr "Skreddersydd"
-
-#: ../../standalone/drakbackup_.c:2394 ../../standalone/drakbackup_.c:2414
-#: ../../standalone/drakbackup_.c:2435
-msgid "Next"
-msgstr "Neste"
-
-#: ../../standalone/drakbackup_.c:2468
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2489
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2512
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Velg pakker for installering"
-
-#: ../../standalone/drakbackup_.c:2540
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2563
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Vennligst velg spr�k som skal brukes."
-
-#: ../../standalone/drakbackup_.c:2584
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Vennligst velg spr�k som skal brukes."
-
-#: ../../standalone/drakbackup_.c:2606
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Vennligst velg spr�k som skal brukes."
-
-#: ../../standalone/drakbackup_.c:2628
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2649
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2729
-#, fuzzy
-msgid "Backup system files"
-msgstr "D�rlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:2731
-#, fuzzy
-msgid "Backup user files"
-msgstr "D�rlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:2733
-#, fuzzy
-msgid "Backup other files"
-msgstr "D�rlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:2735 ../../standalone/drakbackup_.c:2766
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2757
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2761
-#, fuzzy
-msgid "Sending files..."
-msgstr "Finner enheter..."
-
-#: ../../standalone/drakbackup_.c:2831
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2889
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Vennligst test musen."
-
-#: ../../standalone/drakbackup_.c:2907
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2913
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Vennligst velg pakkene du �nsker � installere."
-
-#: ../../standalone/drakbackup_.c:2979
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Nettverkskonfigurasjon"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Nettverkskonfigurasjon"
-
-#: ../../standalone/drakbackup_.c:3010
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "LAN-konfigurasjon"
-
-#: ../../standalone/drakbackup_.c:3014
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "LAN-konfigurasjon"
-
-#: ../../standalone/drakbackup_.c:3018
-#, fuzzy
-msgid "Backup Now"
-msgstr "Oppsett filsystemer"
-
-#: ../../standalone/drakbackup_.c:3043
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3094
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3124
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3132
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3171
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3197 ../../standalone/drakbackup_.c:3272
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3199 ../../standalone/drakbackup_.c:3274
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3213
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3251
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3260
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3288
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Installasjon av %s mislykket. F�lgende feil oppsto:"
-
-#: ../../standalone/drakfloppy_.c:64
-msgid "usage: drakfloppy\n"
-msgstr "bruk: drakfloppy\n"
-
-#: ../../standalone/drakfloppy_.c:68
-msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-
-#: ../../standalone/drakfloppy_.c:69
-msgid "Module name"
-msgstr "Modulnavn"
-
-#: ../../standalone/drakfloppy_.c:69
-msgid "Size"
-msgstr "St�rrelse"
-
-#: ../../standalone/drakfloppy_.c:74 ../../standalone/drakfloppy_.c:373
-msgid "drakfloppy"
-msgstr "drakoppstartsdiskett"
-
-#: ../../standalone/drakfloppy_.c:91
-msgid "boot disk creation"
-msgstr "Lage oppstartsdiskett(er)"
-
-#: ../../standalone/drakfloppy_.c:99 ../../standalone/drakfloppy_.c:112
-msgid "default"
-msgstr "standard"
-
-#: ../../standalone/drakfloppy_.c:115
-#, c-format
-msgid "DrakFloppy Error: %s"
-msgstr "Feil: DrakFloppy: %s"
-
-#: ../../standalone/drakfloppy_.c:126
-msgid "kernel version"
-msgstr "kernel versjon"
-
-#: ../../standalone/drakfloppy_.c:132
-msgid "General"
-msgstr "Generelt"
-
-#: ../../standalone/drakfloppy_.c:137
-msgid "Expert Area"
-msgstr "Ekspert omr�de"
-
-#: ../../standalone/drakfloppy_.c:140
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd valgfrie argumenter"
-
-#: ../../standalone/drakfloppy_.c:141
-msgid "Add a module"
-msgstr "Legg til en modul"
-
-#: ../../standalone/drakfloppy_.c:161
-msgid "force"
-msgstr "tving"
-
-#: ../../standalone/drakfloppy_.c:162
-msgid "if needed"
-msgstr "hvis det beh�ves"
-
-#: ../../standalone/drakfloppy_.c:163
-msgid "omit scsi modules"
-msgstr "utelat scsi moduler"
-
-#: ../../standalone/drakfloppy_.c:164
-msgid "omit raid modules"
-msgstr "utelat raid moduler"
-
-#: ../../standalone/drakfloppy_.c:200
-msgid "Remove a module"
-msgstr "Fjern en modul"
-
-#: ../../standalone/drakfloppy_.c:222
-msgid "Output"
-msgstr "Utdata"
-
-#: ../../standalone/drakfloppy_.c:234
-msgid "Build the disk"
-msgstr "Opprett disken"
-
-#: ../../standalone/drakfloppy_.c:422
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "V�r sikker p� at det er media i %s"
-
-#: ../../standalone/drakfloppy_.c:427
-#, fuzzy, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"Det er ikke noe media i %s\n"
-"Vennligst sett inn ett."
-
-#: ../../standalone/drakfloppy_.c:429
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "Kan ikke dele %s"
-
-#: ../../standalone/drakfloppy_.c:433
-#, c-format
-msgid ""
-"Unable to close properly mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-"Kan ikke stenge mkbootdisk skikkelig:\n"
-"%s \n"
-"%s"
-
-#: ../../standalone/drakfont_.c:230
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:232
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:254
-#, fuzzy
-msgid "no fonts found"
-msgstr "ingen nettverkskort funnet"
-
-#: ../../standalone/drakfont_.c:262 ../../standalone/drakfont_.c:304
-#: ../../standalone/drakfont_.c:353 ../../standalone/drakfont_.c:413
-#: ../../standalone/drakfont_.c:422 ../../standalone/drakfont_.c:448
-#: ../../standalone/drakfont_.c:460 ../../standalone/drakfont_.c:473
-#, fuzzy
-msgid "done"
-msgstr "Ferdig"
-
-#: ../../standalone/drakfont_.c:266
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:302
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:305
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:328
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:351
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formater diskett"
-
-#: ../../standalone/drakfont_.c:354
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Forbereder installasjon"
-
-#: ../../standalone/drakfont_.c:358
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:362
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:369 ../../standalone/drakfont_.c:385
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:373 ../../standalone/drakfont_.c:389
-#: ../../standalone/drakfont_.c:409
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:378 ../../standalone/drakfont_.c:393
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:400
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:404
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:417
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:458 ../../standalone/drakfont_.c:468
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:470
-#, fuzzy
-msgid "xfs restart"
-msgstr "begrense"
-
-#: ../../standalone/drakfont_.c:477 ../../standalone/drakfont_.c:761
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:551
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formater partisjoner"
-
-#: ../../standalone/drakfont_.c:566
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:571
-#, fuzzy
-msgid "Advanced Options"
-msgstr "LAN-konfigurasjon"
-
-#: ../../standalone/drakfont_.c:573
-#, fuzzy
-msgid "Font List"
-msgstr "Monteringspunkt"
-
-#: ../../standalone/drakfont_.c:740
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Velg partisjonene du �nsker � partisjonere"
-
-#: ../../standalone/drakfont_.c:744
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:748
-#, fuzzy
-msgid "StarOffice"
-msgstr "Office"
-
-#: ../../standalone/drakfont_.c:752
-#, fuzzy
-msgid "Abiword"
-msgstr "Avbryt"
-
-#: ../../standalone/drakfont_.c:756
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Skriver"
-
-#: ../../standalone/drakfont_.c:793
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:829
-#, fuzzy
-msgid "Install List"
-msgstr "Installer systemet"
-
-#: ../../standalone/drakfont_.c:859
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:896
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-#, fuzzy
-msgid "Selected All"
-msgstr "Velg fil"
-
-#: ../../standalone/drakfont_.c:898
-#, fuzzy
-msgid "Remove List"
-msgstr "Fjern skriver"
-
-#: ../../standalone/drakfont_.c:915 ../../standalone/drakfont_.c:935
-#, fuzzy
-msgid "Initials tests"
-msgstr "Initmelding"
-
-#: ../../standalone/drakfont_.c:916
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Ikke noe nettverksadapter i systemet ditt!"
-
-#: ../../standalone/drakfont_.c:917
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:918
-#, fuzzy
-msgid "Post Install"
-msgstr "Installer"
-
-#: ../../standalone/drakfont_.c:936
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Ikke noe nettverksadapter i systemet ditt!"
-
-#: ../../standalone/drakfont_.c:937
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Avslutt installering"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:196
-msgid "Internet Connection Sharing"
-msgstr "Deling av Internett tilkobling"
-
-#: ../../standalone/drakgw_.c:122
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:134
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Deling av Internett tilkobling er sl�tt p�"
-
-#: ../../standalone/drakgw_.c:135
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Oppsett av deling av Internett tilkobling har allerede blitt gjort.\n"
-"Dette er for �yeblikket sl�tt p�.\n"
-"\n"
-"Hva vil du gj�re?"
-
-#: ../../standalone/drakgw_.c:139
-msgid "disable"
-msgstr "sl� av"
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "dismiss"
-msgstr "avvis"
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "reconfigure"
-msgstr "Konfigurer p� nytt"
-
-#: ../../standalone/drakgw_.c:142
-msgid "Disabling servers..."
-msgstr "Sl�r av tjenere..."
-
-#: ../../standalone/drakgw_.c:150
-msgid "Internet connection sharing is now disabled."
-msgstr "Deling av Internett tilkobling er sl�tt av"
-
-#: ../../standalone/drakgw_.c:159
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Deling av Internett tilkobling er sl�tt av"
-
-#: ../../standalone/drakgw_.c:160
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Oppsett av deling av Internett tilkobling har allerede blitt gjort.\n"
-"Dette er for �yeblikket sl�tt av.\n"
-"\n"
-"Hva vil du gj�re?"
-
-#: ../../standalone/drakgw_.c:164
-msgid "enable"
-msgstr "sl� p�"
-
-#: ../../standalone/drakgw_.c:171
-msgid "Enabling servers..."
-msgstr "Sl�r p� tjenere..."
-
-#: ../../standalone/drakgw_.c:176
-msgid "Internet connection sharing is now enabled."
-msgstr "Deling av Internett tilkobling er n� sl�tt p�."
-
-#: ../../standalone/drakgw_.c:197
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Du er i ferd med � konfigurere maskinen din til � dele Internett-"
-"tilkobling.\n"
-"Andre maskiner i nettverket ditt vil da kunne bruke denne maskinens "
-"Internett tilkobling.\n"
-"\n"
-"Merk: du trenger et dedikert nettverksadapter for � sette opp et lokalt "
-"nettverk (LAN)."
-
-#: ../../standalone/drakgw_.c:223
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Grensesnitt %s (bruker modul %s)"
-
-#: ../../standalone/drakgw_.c:224
-#, c-format
-msgid "Interface %s"
-msgstr "Grensesnitt %s"
-
-#: ../../standalone/drakgw_.c:232
-msgid "No network adapter on your system!"
-msgstr "Ikke noe nettverksadapter i systemet ditt!"
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ikke noe ethernet nettverksadapter har blitt oppdaget i systemet ditt. "
-"Vennligst kj�r verkt�yet for maskinvarekonfigurasjon."
-
-#: ../../standalone/drakgw_.c:239
-msgid "Network interface"
-msgstr "Nettverksgrensesnitt"
-
-#: ../../standalone/drakgw_.c:240
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Det er bare ett konfigurert nettverksadapter i systemet ditt:\n"
-"\n"
-"%s\n"
-"\n"
-"Jeg er i ferd med � sette opp ditt lokale nettverk (LAN) med dette adapteret."
-
-#: ../../standalone/drakgw_.c:249
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Vennligst velg hvilket nettverksadapter som skal kobles til ditt lokale "
-"nettverk (LAN)."
-
-#: ../../standalone/drakgw_.c:267
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor er ikke konfigurert"
-
-#: ../../standalone/drakgw_.c:268
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:273
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Konfigurasjon av automatiske skritt"
-
-#: ../../standalone/drakgw_.c:274
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Modifiser skriverkonfigurasjon"
-
-#: ../../standalone/drakgw_.c:276
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:288
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:293
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:294
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS tjener IP"
-
-#: ../../standalone/drakgw_.c:295
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:302
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:313
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Mulig LAN-adresse konflikt funnet i konfigurasjonen til %s!\n"
-
-#: ../../standalone/drakgw_.c:321
-msgid "Firewalling configuration detected!"
-msgstr "Brannmurkonfigurasjon oppdaget!"
-
-#: ../../standalone/drakgw_.c:322
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Advarsel! En eksisterende brannmurkonfigurasjon har blitt oppdaget. Du "
-"trenger muligens � konfigurere noe manuelt etter installasjon."
-
-#: ../../standalone/drakgw_.c:329
-msgid "Configuring..."
-msgstr "Konfigurerer..."
-
-#: ../../standalone/drakgw_.c:330
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurerer script, installerer programvare, starter tjenere..."
-
-#: ../../standalone/drakgw_.c:366
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemer ved installering av pakke %s"
-
-#: ../../standalone/drakgw_.c:549
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Alt har blitt konfigurert.\n"
-"Du kan n� dele Internett-tilkobling med andre maskiner p� ditt lokale "
-"nettverk ved � bruke automatisk nettverkskonfigurasjon (DHCP)."
-
-#: ../../standalone/drakgw_.c:566
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Oppsett har allerede blitt gjort, men er for �yeblikket sl�tt av."
-
-#: ../../standalone/drakgw_.c:567
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Oppsett har allerede blitt gjort, og er for �yeblikket sl�tt p�."
-
-#: ../../standalone/drakgw_.c:568
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Deling av Internett tilkobling har aldri blitt konfigurert."
-
-#: ../../standalone/drakgw_.c:573
-msgid "Internet connection sharing configuration"
-msgstr "Internett deling av tilkobling konfigurasjon"
-
-#: ../../standalone/drakgw_.c:580
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Velkommen til verkt�yet for deling av Internett tilkobling!\n"
-"\n"
-"%s\n"
-"\n"
-"Klikk p� Konfigurer for � starte oppsett-hjelperen."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Nettverkskonfigurasjon (%d adaptere"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Slett profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil som skal slettes:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Ny profil...."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Vertsnavn: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internett-tilgang"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Type:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Grensesnitt:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfigurer internetttilgang...."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN-konfigurasjon"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "rensesnitt"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfigurer lokalt nettverk"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Wizard..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Bruk"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Vennligst vent . . . Setter konfigurasjonen p� plass"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Tilkoblet"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Ikke tilkoblet"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Koble til..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Koble fra..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen konfigurerte grensesnitt.\n"
-"Konfigurer disse f�rst ved � klikke p� 'Konfigurer'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN-konfigurasjon"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Oppstartsprotokoll"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Startet ved oppstart"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP-klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktiver n�"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktiver n�"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen internett-tilkobling.\n"
-"Opprett en f�rst ved � klikke p� 'Konfigurer'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internett tilkobling konfigurasjon"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internett tilkobling konfigurasjon"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Oppkoblingstype:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametere"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernettkort"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-klient"
-
-#: ../../standalone/draksec_.c:51
-msgid "Setting security level"
-msgstr "Setter sikkerhetsniv�"
-
-#: ../../standalone/draksec_.c:57
-#, fuzzy
-msgid "Setting security user"
-msgstr "Setter sikkerhetsniv�"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrollpanel"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Velg verkt�yet du �nsker � bruke"
-
-#: ../../standalone/drakxtv_.c:55
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Canadisk (Quebec)"
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "China (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-#, fuzzy
-msgid "France [SECAM]"
-msgstr "Frankrike"
-
-#: ../../standalone/drakxtv_.c:74
-#, fuzzy
-msgid "Ireland"
-msgstr "Islansk"
-
-#: ../../standalone/drakxtv_.c:74
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:75
-#, fuzzy
-msgid "Australia"
-msgstr "�sterrike"
-
-#: ../../standalone/drakxtv_.c:75
-#, fuzzy
-msgid "Newzealand"
-msgstr "Netherlands"
-
-#: ../../standalone/drakxtv_.c:76
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:77
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:113
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:115
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:116
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:120
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:128
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:131
-#, fuzzy
-msgid "There was an error while scanning for TV channels"
-msgstr "Det var en feil ved installering av pakkene:"
-
-#: ../../standalone/drakxtv_.c:132
-msgid "XawTV isn't installed!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:135
-msgid "Have a nice day!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:136
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:148
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:149
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "bruk: keyboarddrake [--expert] [tastatur]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Vennligst velg tastatur-oppsettet ditt."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "�nsker du at BackSpace skal returnere Delete i konsoll?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Bytt CD"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Vennligst sett inn installasjons-CD'en i stasjonen og trykk Ok n�r du er\n"
-"ferdig. Hvis du ikke har denne, trykk Avbryt for � unng� oppgradering."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kan ikke starte oppgradering !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:516
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Vis kun for denne dag"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fil/_Ny"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fil/_�pne"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>�"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fil/_Lagre"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>L"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fil/Lagre _Som"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fil/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Valg"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Valg/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Hjelp"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Hjelp/_Om..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Brukernavn"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "meldinger"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "s�k"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Ett verkt�y for � sjekke loggene dine"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Instillinger"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "lik"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "men ikke lik"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Velg fil"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalender"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Innholdet i filen"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:392
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "vennligst vent, gjennomg�r %s"
-
-#: ../../standalone/logdrake_.c:407
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Lilo/Grub konfigurasjon"
-
-#: ../../standalone/logdrake_.c:408
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Velkommen til proxy-konfigurasjonsverkt�yet.\n"
-"\n"
-"Her kan du sette opp dine http og ftp proxier\n"
-"med eller uten brukernavn og passord\n"
-
-#: ../../standalone/logdrake_.c:416
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache og Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:419
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:420
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:421
-#, fuzzy
-msgid "xinetd"
-msgstr "Avslutt"
-
-#: ../../standalone/logdrake_.c:424
-#, fuzzy
-msgid "service setting"
-msgstr "Tjener"
-
-#: ../../standalone/logdrake_.c:425
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:435
-#, fuzzy
-msgid "load setting"
-msgstr "Formatering"
-
-#: ../../standalone/logdrake_.c:436
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:449
-#, fuzzy
-msgid "alert configuration"
-msgstr "Internett-konfigurasjon"
-
-#: ../../standalone/logdrake_.c:450
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:493
-msgid "Save as.."
-msgstr "Lagre Som..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Vennligst velg din musetype."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ingen serie_usb funnet\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulere tredje knapp?"
-
-#: ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Leser skriverdata: ..."
-
-#: ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Finner enheter ..."
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Velg et grafikk-kort"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Oppstartsenhet"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Brannmurkonfigurasjon"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Brannmurkonfigurasjon"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Brannmur\n"
-"\n"
-"Du har allerede satt opp en brannmur.\n"
-"Klikk p� Konfigurer for � endre eller fjerne brannmuren"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Brannmur\n"
-"\n"
-"Klikk p� Konfigurer for � sette opp en standard brannmur"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Velg spr�k"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Velg installasjonsklasse"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Oppdaging av harddisk"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfigurer mus"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Velg tastatur"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sikkerhet"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Oppsett filsystemer"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formater partisjoner"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Velg pakker for installering"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installer systemet"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Legg til en bruker"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfigurer nettverk"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigurer tjenester"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Installer oppstartslaster"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Opprett en oppstartdiskett"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigurer X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Installer systemet"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Avslutt installering"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall konfigurering\n"
-"\n"
-"Dette konfigurerer en personlig brannmur for denne Mandrake Linux maskinen.\n"
-"For en kraftig dedikert brannmurl�sning ta en kikk p� den\n"
-"spesialiserte MandrakeSecurity Firewall distribusjonen."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Vi vil n� stille deg sp�rsm�l om hvilke tjenester du vil tillate\n"
-"Internett � koble til. Tenk n�ye over disse sp�rsm�lene,\n"
-"da sikkerheten til maskinen din er viktig.\n"
-"\n"
-"Hvis du ikke bruker noen av disse tjenestene for �yeblikket, skru\n"
-"av brannmur. Du kan endre denne konfigurasjonen n�r du vil ved �\n"
-"kj�re denne applikasjonen p� nytt!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Kj�rer du en web-tjener p� denne maskinen som hele hele Internett trenger\n"
-"� se? Hvis du kj�rer en web-tjener som kun trenger tilgang fra denne "
-"maskinen\n"
-"kan du trygt svare NEI her.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Kj�rer du en navnetjener p� denne maskinen? Hvis du ikke satte opp en\n"
-"for � gi ut IP og soneinformasjon til hele Internett, vennligst svar nei.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"�nsker du � tillate innkommende Secure Shell (ssh) tilkoblinger? Dette\n"
-"er et alternativ til telnet som du kan bruke til innlogg. Hvis du bruker\n"
-"telnet n� burde du definitivt bytte til ssh. telnet er ikke kryptert --\n"
-"s� noen angripere kan stjele passordet ditt hvis du bruker det. ssh\n"
-"er kryptert og tillater ikke dette."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"�nsker du � tillate innkommende telnet tilkoblinger?\n"
-"Dette er forferdelig usikkert som vi forklarte i forrige skjermbilde. Vi\n"
-"anbefaler p� det sterkeste � svare Nei her og bruke ssh i stedet for\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Kj�rer du en FTP-tjener her som du trenger � ha tilgjengelig p�\n"
-"Internett? I s�fall anbefaler vi p� det sterkeste at du kun bruker\n"
-"den til anonyme overf�ringer. Passord sendt med FTP kan stjeles av\n"
-"angripere, siden FTP heller ikke bruker kryptering for � overf�re passord.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Kj�rer du en epost-tjener her? Hvis du sender beskjeder via \n"
-"pine, mutt eller andre tekstbaserte epost-klienter gj�r du\n"
-"antageligvis det. Eller skal du sl� av dette.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Kj�rer du en POP- eller IMAP-tjener her? Denne vil bli\n"
-"brukt som vert for ikke-web-baserte epost-kontoer via \n"
-"denne maskinen.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Det ser ut til at du kj�rer en 2.2 kjerne. Hvis nettverks-IP'en\n"
-"din er automatisk satt av en maskin hjemme eller p� kontoret \n"
-"(dynamisk tildelt), trenger vi � tillate dette.. Er dette\n"
-"tilfelle?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Mottar maskinen din tid synkronisert til en annen maskin?\n"
-"For det meste er dette brukt av medium-store /Unix/Linux\n"
-"organisasjoner for � synkronisere tid for ting som logging. Hvis\n"
-"du ikke er en del av et st�rre kontor og ikke har h�rt om dette\n"
-"gj�r du antageligvis ikke."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurasjon ferdig. Skal vi skrive endringene til disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan ikke �pne %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kan ikke �pne %s for skriving: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Brannmurkonfigurasjon"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Vennligst vent, forbereder installasjon"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Nettverksmaskin (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-tjener, SMB-tjener, Proxy-tjener, SSH-tjener"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome arbeidstasjon"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Verkt�y for din Palm Pilot eller din Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbeidstasjon"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Server, Brannmur/ruter"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Tjener for domenenavn og nettverksinformasjon"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kontorprogrammer: tekstbehandlere (kword, abiword), regneark (kspread, "
-"gnumeric), pdf fremvisere etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Lydrelaterte verkt�y: mp3 eller midi-spillere, miksere etc."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "B�ker og howto's om Linux og fri programvare"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE arbeidstasjon"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Sett med verkt�y for e-post, nyheter, web, filoverf�ring og chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL eller MySQL database tjener"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Verkt�y for � forenkle konfigurasjonen p� maskinen din"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Lyd"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentasjon"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsollverkt�y"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix posttjener, Inn nyhetstjener"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internettstasjon"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimediastasjon"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfigurasjon"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Mere grafiske skrivebord (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, basis grafikkmilj� med en samling av passende verkt�y"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafisk milj�"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache og Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Verkt�y for � opprette og brenne CD'er"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kontor og arbeidsmaskin"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Tjener"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiske programmer s� som Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C og C++ utviklingsbibliotek, programmer og include filer"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Nettverk datamaskintjener"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, Mail/Gruppevare/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Spillstasjon"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videospillere og redigerere"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafikk"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Underholdningsprogrammer: arkade, bordspill, strategi etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Sett med verkt�y for � lese og sende e-post og nyheter (pine, mutt, tin...) "
-"og for se p� webben"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Personlig finans"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Et grafisk milj� med et brukervennlig sett med applikasjoner og skrivebords- "
-"verkt�y"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienter for forskjellige protokoller inkludert ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internett-gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Lyd og bilde avspilling/redigeringsprogrammer"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andre grafiske skrivebord"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redigerere, skall, filverkt�y, terminaler"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmer for � h�ndtere dine finanser, s� som gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Personling informasjonsh�ndtering"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD-brenning"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Vitenskaplig arbeidsstasjon"
-
-#~ msgid "Complete (%dMB)"
-#~ msgstr "Full (%dMB)"
-
-#~ msgid "Minimum (%dMB)"
-#~ msgstr "Minimum (%dMB)"
-
-#~ msgid "Recommended (%dMB)"
-#~ msgstr "Anbefalt (%dMB)"
-
-#~ msgid ""
-#~ "Is your printer a multi-function device from HP (OfficeJet, PSC, "
-#~ "PhotoSmart, LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-#~ msgstr ""
-#~ "Er skriveren din en multifunksjonsenhet fra HP (OfficeJet, PSC, "
-#~ "PhotoSmart, LaserJet 1100/1200/1220/3200/3300 med skanner)?"
-
-#~ msgid ""
-#~ "***********************************************************************\n"
-#~ "\n"
-#~ msgstr ""
-#~ "***********************************************************************\n"
-#~ "\n"
-
-#~ msgid ""
-#~ "\n"
-#~ "\n"
-#~ "***********************************************************************\n"
-#~ "\n"
-#~ msgstr ""
-#~ "\n"
-#~ "\n"
-#~ "***********************************************************************\n"
-#~ "\n"
-
-#~ msgid "Utilities"
-#~ msgstr "Verkt�y"
-
-#~ msgid "Archiving, emulators, monitoring"
-#~ msgstr "Arkivering, emulatorer, overv�kning"
diff --git a/perl-install/share/po/pl.po b/perl-install/share/po/pl.po
deleted file mode 100644
index 420d569c8..000000000
--- a/perl-install/share/po/pl.po
+++ /dev/null
@@ -1,13539 +0,0 @@
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# Pawel Jablonski <pj@linux-mandrake.com>, 1999-2000.
-# Wojciech Karas <karas@uci.agh.edu.pl>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-08-10 10:57GMT+0200\n"
-"Last-Translator: Pawel Jablonski <pj@linux-mandrake.com>\n"
-"Language-Team: Polish <pl@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfiguruj wszystkie monitory niezale�nie"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "U�yj rozszerzenia Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfiguruj tylko kart� \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Konfiguracja wielomonitorowa"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Tw�j system obs�uguje wiele monitor�w.\n"
-"Co chcesz zrobi�?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Karta graficzna"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Wybierz kart� graficzn�"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Wybierz X serwer"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X serwer"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Wybierz X serwer"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X serwer"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kt�r� konfiguracj� XFree chcesz mie�?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dla Twojej karty akceleracja 3D jest obs�ugiwana tylko przez XFree %s.\n"
-"Twoja karta jest obs�ugiwana przez XFree %s, gdzie mo�e by� wydajniejsza "
-"obs�uga 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Dla Twojej karty akceleracja 3D jest obs�ugiwana tylko przez XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s z obs�ug� sprz�towej akceleracji 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Dla Twojej karty akceleracja 3D jest obs�ugiwana przez XFree %s.\n"
-"JEST TO ROZWI�ZANIE EKSPERYMENTALNE, MO�E ZAWIESI� KOMPUTER."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s z EKSPERYMENTALN� obs�ug� sprz�towej akceleracji 3D "
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dla Twojej karty akceleracja 3D jest obs�ugiwana tylko przez XFree %s.\n"
-"JEST TO ROZWI�ZANIE EKSPERYMENTALNE, MO�E ZAWIESI� KOMPUTER.\n"
-"Twoja karta jest obs�ugiwana przez XFree %s, gdzie mo�e by� wydajniejsza "
-"obs�uga 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation display driver)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Konfiguracja XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Okre�l rozmiar pami�ci karty graficznej"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Wybierz opcje serwera"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Wybierz monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dwa krytyczne parametry to cz�stotliwo�� synchronizacji pionowej,\n"
-"kt�ra okre�la, jak cz�sto od�wie�any jest ca�y ekran oraz najbardziej "
-"istotny\n"
-"- cz�stotliwo�� synchronizacji poziomej - rysowania linii.\n"
-"\n"
-"Jest BARDZO WA�NE aby nie poda� typu monitora o wi�kszym zakresie\n"
-"cz�stotliwo�ci odchylania ni� mo�liwo�ci twojego monitora,\n"
-"poniewa� mo�e to spowodowa� jego uszkodzenie.\n"
-"Je�li masz w�tpliwo�ci, wybierz zachowawcze ustawienia."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Cz�stotliwo�� synchronizacji poziomej"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Cz�stotliwo�� synchronizacji pionowej"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Nie skonfigurowano monitora"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Nie skonfigurowano jeszcze karty graficznej"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Nie okre�lono jeszcze rozdzielczo�ci"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Chcesz przetestowa� t� konfiguracj�?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Ostrze�enie: testowanie tej karty mo�e zawiesi� komputer"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test konfiguracji"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"spr�buj zmieni� jakie� parametry"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Wyst�pi� b��d:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Pozostalo %d sekund"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Czy te ustawienia sa prawidlowe?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Wyst�pi� b��d, spr�buj zmieni� jakie� parametry"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rozdzielczo��"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Okre�l rozdzielczo�� oraz g��bi� kolor�w"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Karta graficzna: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Serwer XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Wi�cej"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Tryb eksperta"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Poka� wszystkie"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rozdzielczo�ci"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Uk�ad klawiatury: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Typ myszy: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Port myszy: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Synchronizacja pozioma monitora: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Synchronizacja pionowa monitora: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Karta graficzna: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Karta graficzna: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Pami�� karty: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Ilo�� kolor�w: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rozdzielczo��: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Serwer XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Sterownik XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Przygotowywanie konfiguracji X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Co chcesz zrobi�?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Zmieni� monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Zmieni� kart� graficzn�"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Zmieni� opcje serwera"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Zmieni� rozdzielczo��"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Obejrze� informacje"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Przetestowa� ponownie"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Wyj��"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zachowa� zmiany?\n"
-"Aktualna konfiguracja jest nast�puj�ca:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X przy uruchomieniu "
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mo�na skonfigurowa� komputer, aby automatycznie po uruchomieniu startowa�y X-"
-"y.\n"
-"Czy chcesz, by X-y uruchamia�y si� po restarcie?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "By uaktywni� zmiany zaloguj si� ponownie do %s"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Wyloguj si� i u�yj kombinacji klawiszy Ctrl-Alt-BackSpace "
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kolor�w (8 bit�w)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tysi�ce kolor�w (15 bit�w)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tysi�cy kolor�w (16 bit�w)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milion�w kolor�w (24 bity)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardy kolor�w (32 bity)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB lub wi�cej"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardowa VGA, 640x480 przy 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 przy 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Zgodny z 8514, 1024x768 przy 87 Hz z przeplotem (bez 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 przy 87 Hz z przeplotem, 800x600 in 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Rozszerzona SVGA, 800x600 przy 60 Hz, 640x480 przy 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA bez przeplotu, 1024x768 przy 60 Hz, 800x600 przy 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Wysokocz�stotliwo�ciowy SVGA, 1024x768 przy 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Wielocz�stotliwo�ciowy do 1280x1024 przy 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Wielocz�stotliwo�ciowy do 1280x1024 przy 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Wielocz�stotliwo�ciowy do 1280x1024 przy 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor do 1600x1200 przy 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor do 1600x1200 przy 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Pierwszy sektor na partycji startowej"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Pierwszy sektor na dysku (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instalacja SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Gdzie chcesz zainstalowa� program rozruchowy?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalacja LILO/Grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO z menu tekstowym"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO z menu graficznym"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Start z DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Podstawowe opcje programu rozruchowego"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "U�yty program rozruchowy"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalacja programu rozruchowego"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Urz�dzenie startowe"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nie funkcjonuje ze starszymi BIOSami)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Odczytuj du�e bloki"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "du�e bloki"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Tryb video"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Op�nienie przed uruchomieniem domy�lnego systemu"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Has�o"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Has�o (powt�rnie)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Ograniczenie opcji linii komend"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ograniczenie"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Wyczy�ci� /tmp przy ka�dym starcie systemu"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Okre�l rozmiar pami�ci, je�li trzeba (znaleziono %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "W��czy� profile sprz�towe?"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Podaj rozmiar pami�ci w MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcja \"Ograniczenie opcji linii komend\" nie dzia�a bez has�a"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Prosz� spr�bowa� ponownie"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Has�a nie zgadzaj� si�"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Komunikat startowy"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Op�nienie uruchamiania"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Uaktywni� uruchamianie z CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Enable OF Boot?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Domy�lny system?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Masz nast�puj�ce pozycje.\n"
-"Mo�esz doda� nast�pne lub zmieni� istniej�ce."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Zrobione"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modyfikuj"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Jakiego typu pozycj� chcesz doda�?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Inny system operacyjny (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Inny system operacyjny (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Inny system operacyjny (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Obraz"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Do��cz"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Startowy ramdysk"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Zapis-odczyt"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Niebezpieczne"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etykieta"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Domy�lne"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Rozmiar startowego ramdysku"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "brak video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Usu� pozycj�"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Pusta etykieta jest niedozwolona"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Musisz mie� partycj� wymiany (swap)"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ta etykieta jest ju� u�ywana"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Znaleziono %s  %s interfejs�w"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Masz inne?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Czy masz interfejs %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nie"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Tak"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Poka� informacj� o sprz�cie"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalacja sterownika do karty %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modu� %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kt�ry sterownik %s wypr�bowa�?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"W pewnych przypadkach sterownik %s potrzebuje dodatkowych\n"
-"informacji do poprawnego dzia�ania, mimo �e zazwyczaj dzia�a\n"
-"bez nich. Czy chcesz poda� dodatkowe parametry, czy te� \n"
-"pozwolisz sterownikowi wykry� je automatycznie?\n"
-"Czasami wykrywanie mo�e zawiesi� komputer, nie powoduje to\n"
-"jednak �adnych problem�w (utraty danych)."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Autodetekcja"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Okre�l parametry"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Mo�esz przekaza� do modu�u %s parametry.\n"
-"S� one w formacie \"nazwa1=warto��1 nazwa2=warto��2 ...\n"
-"Np. \"io=0x300 irq=7\" "
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opcje modu�u:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Nieudane za�adowanie modu�u %s.\n"
-"Chcesz spr�bowa� z innymi parametrami?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(ju� dodano %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Has�o jest zbyt proste"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Prosz� poda� nazw� u�ytkownika"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Nazwa u�ytkownika mo�e sk�ada� si� tylko  z ma�ych liter, cyfr, `-'i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ten u�ytkownik zosta� ju� dodany"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Dodaj u�ytkownika"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Podaj dane u�ytkownika\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Akceptuj u�ytkownika"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nazwisko"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Identyfikator:"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Pow�oka"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatyczne logowanie"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mo�na skonfigurowa� komputer, by automatycznie logowa� u�ytkownika\n"
-"w systemie. Je�li nie chcesz korzysta� z tej mo�liwo�ci, wybierz Anuluj."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Wybierz domy�lnego u�ytkownika:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Wybierz uruchamiane �rodowisko graficzne:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Wybierz j�zyk u�ywania systemu"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Mo�esz wybra� inne j�zyki, kt�re chcesz mie� do dyspozycji po instalacji"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Wszystkie"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "U�ytkownicy"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "U�ytkownika"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "Uruchamianie CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Ten pakiet musi by� uaktualniony.\n"
-"Jeste� pewien, �e chcesz go odznaczy�?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Anuluj"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Witajcie, w�amywacze"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Z�y"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardowa"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Wysoki"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Wysoki"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidalny"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ten poziom powinien by� u�ywany ostro�nie. Co prawda system jest �atwiejszy\n"
-"do u�ywania, ale jest te� bardziej wra�liwy i mniej bezpieczny, szczeg�lnie "
-"dla \n"
-"maszyn pracuj�cych  w Internecie. Nie ma zabezpieczenia has�em!"
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Has�a s� uaktywnione, ale ci�gle nie zalecamy u�ywania komputera\n"
-"w sieci."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"To jest standardowy poziom zabezpiecze� dla komputera, kt�ry b�dzie\n"
-"korzysta� z sieci jako klient."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Ten poziom umo�liwia u�ycie komputera jako serwera, kt�ry akceptuje\n"
-"po��czenia z wieloma klientami przy zachowaniu wysokiego \n"
-"poziomu bezpiecze�stwa."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"To czwarty poziom zabezpiecze�.\n"
-"System jest ca�kowicie zamkni�ty, poziom zabezpiecze� jest maksymalny."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Wybierz poziom bezpiecze�stwa"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Ustawienie poziomu bezpiecze�stwa"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Wybierz opcje serwera"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Witamy w programie wybierajacym system operacyjny- %s\n"
-"\n"
-"Wybierz system operacyjny z listy powyzej lub\n"
-"czekaj %d sekund na domyslny start.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Witamy w programie wybierajacym system - GRUB!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Uzyj %c i %c klawiszy , aby podswietlic pozycje."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Nacisnij Enter, aby zaladowac wybrany system operacyjny, `e' aby wyedytowac"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komendy przed zaladowaniem albo `c' , aby pracowac w linii polecen."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Podswietlony system zostanie uruchomiony po %d sekundach."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nie ma ju� miejsca na /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Pulpit"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menu startowe"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Gdzie chcesz zainstalowa� program rozruchowy?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "brak pomocy.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguracja sposobu uruchamiania"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Plik"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Plik/Za_ko�cz"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>k"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Wygl�d nowoczesny z kategoriami"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Styl nowoczesny"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Wygl�d tradycyjny"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Wygl�d tradycyjny Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Uaktywnij graficzny start"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Tryb Lilo/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Tryb Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"%s jest programem uruchamiaj�cym system (bootloaderem)\n"
-"Wybierz Konfiguruj, by uruchomi� kreatora.."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfiguruj"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Tryb pracy systemu"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Uruchom X-Window po uruchomieniu"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nie, nie chc� automatycznego logowania"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Tak, chc� dla tego u�ytkownika korzysta� z automatycznego logowania"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "nie mo�na otworzy� dla odczytu /etc/inittab: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minut"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekund"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Nie mo�na doda� wi�cej partycji"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"Mo�esz wybra� inne j�zyki, kt�re chcesz mie� do dyspozycji po instalacji"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francja"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "belgijski"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "niemiecki"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "grecki"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "norweski"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Patrz"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "w�oski"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "szeregowa"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Prosz� zacz�� od archiwizacji danych"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Czytaj uwa�nie!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Je�eli masz zamiar  u�ywa� aboot pami�taj, by zostawi�, \n"
-"wolne miejsce na pocz�tku dysku - wystarczy 2048 sektor�w."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "B��d"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Kreator"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Wybierz czynno��"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Na dysku jest jedna wielka partycja FAT.\n"
-"(zazwyczaj u�ywana przez Microsoft Dos/Windows)\n"
-"Nale�y zacz�� od pomniejszenia tej partycji\n"
-"(kliknij na partycji, po czym kliknij na \"Zmie� rozmiar\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Prosz� klikn�� na partycji"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Szczeg�y"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "nieudane montowanie"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Pusta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Inna"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Typy systemu plik�w:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Utw�rz"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Typ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "U�yj zamiast tego ``%s'' "
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Usu�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Najpierw ``Odmontuj'' "
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Po zmianie typu partycji %s, wszystkie dane na niej zostan� utracone"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Wybierz czynno��"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Utw�rz now� partycj�"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Prze��cz na tryb zaawansowany"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Prze��cz na tryb standardowy"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Cofnij"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Kontynuowa� mimo to?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Wyj�cie bez zapisywania"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Opu�ci� program bez zapisywania tablicy partycji?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Chcesz przetestowa� t� konfiguracj�?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Rozmie�� automatycznie"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Wyczy�� wszystko"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Wykrywanie dysk�w"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Wszystkie partycje podstawowe s� u�ywane"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Nie mo�na doda� wi�cej partycji"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"By mie� wi�cej partycji, nale�y usun�� jedn�,\n"
-"by by�o mo�liwe utworzenie partycji rozszerzonej."
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Zapisz tablic� partycji"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Odzyskaj tablic� partycji"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Odzyskaj tablic� partycji"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Odzyskaj tablic� partycji"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Automatyczne montowanie wyjmowanych dysk�w"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Wybierz plik"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Zapasowa tablica partycji ma inny rozmiar\n"
-"Kontynuowa�?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Ostrze�enie"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"W�� dyskietk� do stacji.\n"
-"Wszystkie dane na niej zostan� utracone"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Pr�ba odzyskania tablicy partycji"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Obejrze� informacje"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Punkt montowania"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcje"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Zmie� rozmiar"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Przesu�"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatuj"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montuj"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Dodaj do RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Dodaj do LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Odmontuj"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Usu� z RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Usu� z LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modyfikuj RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "U�yj na plikopartycj�"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Utw�rz now� partycj�"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sektor startowy: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Rozmiar w MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Typ systemu plik�w: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punkt montowania: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferencja:"
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatowanie plikopartycji %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Zmiana typu partycji"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Jakiego systemu plik�w potrzebujesz?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Prze��czenie z ext2 do ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Gdzie chcesz zamontowa� plikopartycje %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gdzie chcesz zamontowa� urz�dzenie %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nie mo�na odmontowa� tej partycji, gdy� jest u�ywana przez plikopartycj�.\n"
-"Zacznij od usuni�cia plikopartycji."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Obliczanie granic systemu plik�w FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Zmiana rozmiaru"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Tej partycji nie mo�na zmniejszy�"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Wszystkie dane na tej partycji powinny zosta� zarchiwizowane"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Po zmianie rozmiaru partycji %s, wszystkie dane na niej zostan� utracone"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Okre�l nowy rozmiar"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Rozmiar w MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na kt�ry dysk chcesz przenie�� ?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na kt�ry sektor chcesz przenie�� ?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Przenoszenie"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Przenoszenie partycji..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Wybierz istniej�cy RAID aby doda� do niego"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nowy"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Wybierz istniej�cy LVM aby doda� do niego"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Nazwa LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Na tej partycji nie mo�na za�o�y� plikopartycji"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Plikopartycja"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nazwa plikopartycji: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nazwisko"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Plik jest ju� u�ywany jako plikopartycja, wybierz inny"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Plik ju� istnieje. U�y� go?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Opcje modu�u:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "urz�dzenie"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "poziom"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "rozmiar kawa�ka"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Uwa�aj: ta operacja jest niebezpieczna"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Okre�l spos�b partycjonowania."
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Niestety, nie mo�na utworzy� /boot tak daleko na dysku (poza cylindrem "
-"1024)\n"
-"Albo u�yjesz LILO, (nie b�dzie dzia�a�), lub nie b�dziesz u�ywa� lilo\n"
-"i nie potrzebujesz /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Doda�e� partycj� root (/) na dysku poza cylindrem 1024, nie ma te�\n"
-"partycji /boot. Je�eli wi�c chcesz u�ywa� programu rozruchowego lilo\n"
-"dodaj partycj� /boot poni�ej cylindra 1024"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Wybra�e� jako partycj� root (/) programowy RAID.\n"
-"�aden program rozruchowy nie jest w stanie obs�u�y� jej bez partycji /boot.\n"
-"Pami�taj wi�c o dodaniu partycji /boot."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tablica partycji nap�du %s b�dzie zapisana na dysk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Nale�y zrestartowa� komputer przed uaktywnieniem zmian"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Po sformatowaniu wszystkie dane na partycji %s, zostan� utracone"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatowanie"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatowanie plikopartycji %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatowanie partycji %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid pad�"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Brak wolnego miejsca do stworzenia nowych partycji"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Brak wolnego miejsca do stworzenia nowych partycji"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Rozdzielczo��: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Urz�dzenie: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Dosowy dysk: (przypuszczalnie %s)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Rodzaj: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nazwa:"
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Pocz�tek: sektor  %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Rozmiar: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektor�w"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylinder %d do cylindra %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Sformatowana\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nie sformatowana\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Zamontowano\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Plikopartycje:%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Domy�lna partycja startowa\n"
-"    (dla startu MS-DOS, nie dla lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Poziom %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Rozmiar kawa�ka %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Dyski RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nazwa plikopartycji: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Rozmiar: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cylindr�w, %s g�owic, %s sektor�w\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informacje: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Dyski LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Typ tabeli partycji: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na szynie %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcje: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Typ systemu plik�w: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "To has�o jest zbyt proste ( musi by� co najmniej %d znak�w)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Has�a nie zgadzaj� si�"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Zmiana typu partycji"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Prosz� klikn�� na partycji"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Serwer DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatowania z %s nieudane"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nie wiadomo jak sformatowa� %s typu %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck zwr�ci�o kod b��du %d lub sygna� %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "b��d odmontowania %s; %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "proste"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "serwer"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Nie mo�na u�ywa� JFS na partycji mniejszej ni� 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Nie mo�na u�ywa� ReiserFS na partycji mniejszej ni� 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Punkty montowania musz� zaczyna� si� od /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Istnieje partycja z punktem montowania %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nie mo�n u�y� LVM dla punktu montowania %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ten katalog powinien by� wewn�trz systemu plik�w / (root)"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Dla tego punktu montowania potrzebujesz porz�dnego systemu plik�w (ext2,"
-"reiserfs)\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Nie mo�n u�y� LVM dla punktu montowania %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Brak wolnego miejsca dla automatycznego rozmieszczenia"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "B��d otwarcia %s do zapisu: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Wyst�pi� b��d - nie znaleziono urz�dze�, na kt�rych mo�na utworzy� nowe \n"
-"systemy plik�w. Sprawd� sprz�t, by wykry� przyczyn�"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nie masz �adnych partycji!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Powy�ej pokazano wykryte na Twoim dysku istniej�ce partycje linuksowe\n"
-"Mo�esz zastosowa� wyb�r okre�lony przez kreatora, s� one odpowiednie\n"
-"w wi�kszo�ci przypadk�w. Jesli chcesz zmieni� , musisz okre�li� co najmniej\n"
-"partycj� root (\"/\"). Nie wybieraj zbyt ma�ej partycji - nie b�dziesz m�g� "
-"w�wczas\n"
-"zainstalowa� zbyt du�o oprogramowania. Je�li chcesz trzyma� swoje dane na \n"
-"oddzielnej partycji, mo�esz tak�e wybra� \"/home\" (jest to mo�liwe tylko, "
-"je�li\n"
-"masz wi�cej ni� jedn� partycj� linuksow�\n"
-"\n"
-"\n"
-"Dla informacji, ka�da partycja jest okre�lona przez \"Nazw�\" i \"Rozmiar"
-"\".\n"
-"\n"
-"\n"
-"Nazwa jest okre�lana nast�puj�co: \"typ dysku\",\"numer dysku\",\n"
-"\"numer partycji\". (na przyk�ad \"hda1\").\n"
-"\n"
-"\n"
-"\"Typ dysku\" to \"hd\" w przypadku dysk�w IDE, \"sd\" w przypadku SCSI\n"
-"\n"
-"\n"
-"\"Numer dysku\" to litera po \"hd\" lub \"sd\". W przypadku dysku IDE:\n"
-"\n"
-"   * \"a\" oznacza pierwszy dysk na pierwszym kontrolerze IDE\n"
-"\n"
-"   * \"b\" oznacza drugi dysk na pierwszym kontrolerze IDE\n"
-"\n"
-"   * \"c\" oznacza pierwszy dysk na drugim kontrolerze IDE\n"
-"\n"
-"   * \"d\" oznacza drugi dysk na drugim kontrolerze IDE\n"
-"\n"
-"\n"
-"W przyadku dysk�w SCSI \"a\" oznacza pierwszy dysk twardy,\n"
-"\"b\" - drugi dysk twardy, itd."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Teraz mo�esz wybra� us�ugi, jakie chcesz mie� w��czone przy starcie\n"
-"systemu.\n"
-"\n"
-"\n"
-"Je�eli najedziesz mysz� na element listy, to pojawi si� ma�y ob�oczek\n"
-"z opisem tej us�ugi.\n"
-"\n"
-"\n"
-"Zachowaj szczeg�ln� ostro�no�� przy wyborze, je�eli chcesz u�ywa�\n"
-"swojej maszyny jako serwera - niekt�rych us�ug nie b�dziesz chcia�\n"
-"uruchamia�. Pami�taj, �e uruchomienie niekt�rych us�ug na serwerze\n"
-"mo�e by� niebezpieczne.\n"
-"W og�lno�ci, uruchamiaj tylko te us�ugi, kt�rych naprawd� potrzebujesz."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"W tym etapie instalacji okre�lasz, gdzie na dysku zostanie zainstalowany\n"
-"Mandrake Linux. Je�li dysk jest pusty lub istniej�ce systemy operacyjne\n"
-"zajmuj� ca�e dost�pne miejsce, nale�y podzieli� dysk na partycje\n"
-"Partycjonowanie to po prostu logiczny podzia� twardego dysku na oddzielne\n"
-"obszary w celu zainstalowania systemu Mandrake Linux\n"
-"\n"
-"\n"
-"Poniewa� efekt partycjonowania jest nieodwracalny, czynno�� wydaje si�\n"
-"straszna i jest stresuj�ca dla niedo�wiadczonych u�ytkownik�w.\n"
-"Kreator ten upraszcza ten proces, tak wi�c nie si� czego obawia�,\n"
-"tym niemniej warto po�wi�ci� nieco czasu na wcze�niejsze\n"
-"zapoznanie si� z dokumentacj�\n"
-"\n"
-"\n"
-"Niezb�dne s� co najmniej 2 partycje: jedna dla systemu operacyjnego\n"
-"oraz druga na pami�� wirtualn� (swap).\n"
-"\n"
-"\n"
-"Je�li partycje tes ju� zosta�y utworzone (w czasie poprzedniej instalacji\n"
-"lub przy pomocy innego narz�dzia), nale�y je wybra� do zainstalowania\n"
-"systemu Linux\n"
-"\n"
-"\n"
-"Je�li partcje te nie istniej� , nale�y je utworzy�.\n"
-"By to zrobi�, u�yj powy�szego kreatora. Mo�liwych jest kilka rozwi�za�\n"
-"zale�nych od konfiguracji dysku twardego:\n"
-"\n"
-"* U�ycie istniej�cych partycji: gdy kreator wykryje jedn� lub wi�cej "
-"istniej�cych partycji linuksowych,\n"
-"   wybierz to rozwi�zanie, je�li chcesz u�y� te partycje na now� "
-"instalacj�.\n"
-"\n"
-"\n"
-"* Skasowanie zawarto�ci ca�ego dysku: Je�li chcesz skasowa� ze swojego\n"
-"dysku wszystkie dane i wszystkie partycje\n"
-"  i zast�pi� nowym systemem Mandrake Linux, wybierz to rozwi�zanie. Pami�taj,"
-"w tym przypadku nie\n"
-"  nie ma mo�liwo�ci odwrotu po potwierdzeniu wyboru.\n"
-"\n"
-"\n"
-"*  U�yj wolnego miejsca na partycji Windows: Je�li na dysku jest "
-"zainstalowany\n"
-"Microsoft Windows i zajmuje \n"
-"  ca�e dost�pne miejsce,mo�liwe jest utworzenie wolnego miejsca dla Linuksa. "
-"By to zrobi�, mo�na skasowa� \n"
-"  partycj� Windows wraz z danymi (patrz \"Wyma� ca�y dysk\" lub \"Tryb "
-"eksperta\") lub zmieni�\n"
-"  rozmiar partycji Windows. Zmiana rozmiaru jest realizowana bez\n"
-"utraty �adnych danych. \n"
-"  To rozwi�zanie jest zalecane, je�li chcesz u�ywa� zar�wno Linuksa-"
-"Mandrake, jak i Windows\n"
-"\n"
-"\n"
-"  Nale�y pami�ta�, �e w ten spos�b partycja Windows b�dzie mniejsza ni� do "
-"tej pory. Oznacza to\n"
-" mniej wolnego miejsca na dane oraz instalacj� nowych program�w\n"
-"\n"
-"\n"
-"* Tryb eksperta: wybierz t� opcj�, je�li chcesz partycjonowa� sw�j dysk "
-"r�cznie.Pami�taj!\n"
-"  Wybranie tej opcji daje Ci du�e mo�liwo�ci, lecz jest bardzo niebezpieczne."
-"Bardzo �atwo mo�na utraci� wszystkie dane\n"
-"  Nie wybieraj wi�c tej opcji, je�li naprawd� nie wiesz, co robisz!"
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Wszystkie nowo powsta�e partycje musz� zosta� sformatowane przed\n"
-"wykorzystaniem (formatowanie oznacza utworzenie systemu plik�w).\n"
-"\n"
-"\n"
-"Mo�na teraz tak�e powt�rnie sformatowa� istniej�ce ju� partycje, by\n"
-"usun�� znajduj�ce si� na nich dane. Je�li chcesz to zrobi�, zaznacz\n"
-"partycje do sformatowania\n"
-"\n"
-"\n"
-"Pami�taj, �e nie jest konieczne formatowanie wszystkich istniej�cych ju�\n"
-"partycji. Nale�y sformatowa� partycje zawieraj�ce system operacyjny:\n"
-"\"/\", \"/usr\" oraz \"/var\", nie jest natomiast konieczne formatowanie\n"
-"partycji zawieraj�cych dane, kt�re chcesz zachowa� (zazwyczaj /home).\n"
-"Uwa�nie wybieraj partycje do sformatowania, po sformatowaniu wszystkie\n"
-"dane zostan� utracone bez mo��iwo�ci ich odzyskania.\n"
-"\n"
-"\n"
-"Wybierz \"OK\", je�li jeste� ju� gotowy do formatowania partycji.\n"
-"\n"
-"\n"
-"Wybierz \"Anuluj\", je�li chcesz wybra� do zainstalowania\n"
-"Linuksa-Mandrake inne partycje."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Trwa instalacja systemu operacyjnego Mandrake Linux.\n"
-"Zabierze to troch� czasu (w zale�no�ci od ilo�ci  wybranych pakiet�w\n"
-"oraz szybko�ci komputera)\n"
-"\n"
-"\n"
-"B�d� cierpliwy."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"W tym etapie instalacji wybierasz partycje, na kt�rych b�dzie instalowany\n"
-"Mandrake Linux, je�li istniej�, np. pozosta�y po poprzedniej instalacji,\n"
-"lub te� zosta�y za�o�one innym narz�dziem. W przeciwnym razie nale�y je\n"
-"utworzy�. Operacja ta polega na logicznym podziale dysku twardego komputera\n"
-"na na oddzielne obszary\n"
-"\n"
-"\n"
-"Utworzenie partycji nale�y rozpocz�� od wybrania dysku. Robi si� to przez\n"
-"klikni�cie na zak�adce \"hda\" dla pierwszego dysku IDE, \"hdb\" dla "
-"drugiego,\n"
-"lub \"sda1\" dla pierwszego dysku SCSI, itd.\n"
-"\n"
-"\n"
-"W celu podzielenia dysku na partycje mo�na u�y� nast�puj�cych opcji:\n"
-"\n"
-"   * Wyczy�� wszystko: ta opcja kasuje wszystkie partycje na wybranym "
-"dysku.\n"
-"\n"
-"\n"
-"   * Rozmie�� automatycznie: ta opcja automatycznie tworzy partycje ext2\n"
-"     oraz swap na wolnym (niespartycjonowanym) miejscu dysku\n"
-"\n"
-"\n"
-"   * Odzyskaj tablic� partycji: je�li tablica partycji jest uszkodzona, "
-"mo�na\n"
-"     spr�bowa� j� odzyska� przy pomocy tej opcji. B�d� ostro�ny i pami�taj,\n"
-"�e ta opcja mo�e zawie��\n"
-"\n"
-"\n"
-"   * Cofnij: u�yj tej opcji by anulowa� zmiany.\n"
-"\n"
-"\n"
-"   * Prze�aduj: u�yj tej opcji, je�li chcesz cofn�� wszystkie zmiany i "
-"za�adowa�\n"
-"     pocz�tkow� tablic� partycji\n"
-"\n"
-"\n"
-"   * Kreator: Mo�esz u�y� kreatora, kt�ry pomo�e Ci podzieli� dysk na "
-"partycje\n"
-"     Zalecane, je�li niewiele wiesz o podziale na partycje.\n"
-"\n"
-"\n"
-"   * Przywr�� z dyskietki: je�li podczas poprzedniej instalacji zapisa�e� "
-"tabel�\n"
-"     partycji na dyskietce, mo�esz odzyska� j� korzystaj�c z tej opcji.\n"
-"\n"
-"\n"
-"   * Zapisz na dyskietk�: Mo�esz zapisa� na dyskietk� tablic� partycji, by "
-"mie�\n"
-"     mo�liwo�� jej odzyskania w przypadku pomy�ki\n"
-"     U�ycie tej opcji jest bardzo zalecane\n"
-"\n"
-"\n"
-"   * Zrobione: po zako�czeniu partycjonowania dysku u�yj tej opcji do "
-"zapisania\n"
-"     na dysku zmian.\n"
-"\n"
-"\n"
-" Mo�esz wybra� odpowiedni� opcj� u�ywaj�c klawisza \n"
-"TAB i strza�ek g�ra/d� klawiatury. \n"
-"\n"
-"\n"
-"Po wybraniu partycji mo�esz nacisn��:\n"
-"\n"
-"           * Ctrl-c by utworzy� now� partycj� ( je�eli zosta� wybrany pusty "
-"obszar\n"
-"\n"
-"           * Ctrl-d by usun�� partycj�\n"
-"\n"
-"           * Ctrl-m by okre�li� punkt montowania"
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Na dysku wykryto wi�cej ni� jedn� partycj� Windows. Wybierz, kt�r�\n"
-"z nich chcesz zmniejszy� w celu zainstalowania Mandrake Linux\n"
-"\n"
-"\n"
-"Dla informacji, ka�da partycja jest okre�lona przez\n"
-" \"Nazw� linuksow�\", \"Nazw� Windows\" i \"Rozmiar\".\n"
-"\n"
-"\n"
-"Nazwa linuksowa jest okre�lana nast�puj�co: \"typ dysku\",\"numer dysku\",\n"
-"\"numer partycji\". (na przyk�ad \"hda1\").\n"
-"\n"
-"\n"
-"\"Typ dysku\" to \"hd\" w przypadku dysk�w IDE, \"sd\" w przypadku SCSI\n"
-"\n"
-"\n"
-"\"Numer dysku\" to litera po \"hd\" lub \"sd\". W przypadku dysku IDE:\n"
-"\n"
-"   * \"a\" oznacza pierwszy dysk na pierwszym kontrolerze IDE\n"
-"\n"
-"   * \"b\" oznacza drugi dysk na pierwszym kontrolerze IDE\n"
-"\n"
-"   * \"c\" oznacza pierwszy dysk na drugim kontrolerze IDE\n"
-"\n"
-"   * \"d\" oznacza drugi dysk na drugim kontrolerze IDE\n"
-"\n"
-"\n"
-"W przyadku dysk�w SCSI \"a\" oznacza pierwszy dysk twardy,\n"
-"\"b\" - drugi dysk twardy, itd.\n"
-"\n"
-"\"Nazwa Windows\" to litera dysku pod Windows (pierwszy dysk \n"
-"lub partycja to \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "B�d� cierpliwy. Ta operacja mo�e potrwa� kilkana�cie minut."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Wybierz \"Instalacja\" je�li nie masz zainstalowanej starszej wersji\n"
-"Mandrake Linux, lub je�li chcesz u�ywa� wielu dystrybucji lub wersji.\n"
-"\n"
-"\n"
-"Wybierz \"Aktualizacja\" je�li chcesz zaktualizowa� ju� zainstalowan� wersj� "
-"Mandrake Linux:\n"
-"\n"
-"\n"
-"W zale�no�ci od poziomu Twojej znajomo�ci GNU/Linuksa mo�esz wybra� jeden z "
-"nast�puj�cych sposob�w  instalacji\n"
-" lub aktualizacji systemu operacyjnego Mandrake Linux.\n"
-"\n"
-"* Zalecany: Je�li nie instalowa�e� GNU/Linuksa nigdy wcze�niej, wybierz ten "
-"spos�b instalacji,\n"
-"  jest bardzo prosty, odpowiesz na kilka prostych pyta�\n"
-"\n"
-"\n"
-"* U�ytkownika: Je�li jeste� obeznany z GNU/Linux, mo�esz okre�li� podstawowe "
-"zastosowanie komputera. (stacja robocza, serwer\n"
-"  programowanie). Odpowiesz tak�e na wi�cej pyta�, ni� przy sposobie "
-"instalacji \"Zalecany\".\n"
-"  tak wi�c powiniene� troch� zna� GNU/Linuksa, by wybra� ten "
-"rodzajinstalacji\n"
-"\n"
-"\n"
-"* Ekspert: Je�li dobrze znasz  GNU/Linuksa, wybierz ten spos�b instalacji "
-"Podobnie jak w instalacji \"U�ytkownika\", b�dziesz m�g� okre�li� podstawowe "
-"zastosowanie komputera. Przemy�l,\n"
-" czy na pewno chcesz wybra� ten rodzaj instalacji. B�dziesz m�g� "
-"przeprowadzi� bardzo zindywidualizowan� instalacj�, lecz\n"
-"  odpowied� na niekt�re pytania mo�e by� bardzo trudna bez dobrej znajomo�ci "
-"GNU/Linuksa.\n"
-"  Nie wybieraj wi�c tego rodzaju instalacji, je�li nie jeste� pewien."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Wybierz w�a�ciwy port. Na przyk�ad COM1 z MS Windows\n"
-"w GNU/Linux nazywa si� ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO ( LInux LOader ) i Grub to programy rozruchowe: potrafi� uruchomi�\n"
-"GNU/Linux lub inny system operacyjny, zainstalowany na twoim komputerze.\n"
-"Zazwyczaj inne istniej�ce w komputerze systemy s� prawid�owo wykrywane\n"
-"i instalowane. Je�eli tak nie jest, powiniene� \"r�cznie\" wprowadzi�\n"
-"odpowiednie dane. Uwa�nie wybieraj w�a�ciwe parametry.\n"
-"\n"
-"\n"
-"Mo�esz oczywi�cie r�wnie� uniemo�liwi� dost�p do nich przy starcie przez \n"
-"usuni�cie ich z listy. W tej sytuacji musisz jednak posiada� dyskietki\n"
-"startowe, by je uruchomi�."
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Powiniene� wskaza�, gdzie chcesz\n"
-"umie�ci� informacje wymagane do uruchomienia GNU/Linuxa\n"
-"\n"
-"\n"
-"Je�li nie wiesz dok�adnie, co robisz, wybierz\n"
-" \"Pierwszy sektor na dysku (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"Instalator spr�buje wykry� kontroler(y) SCSI na magistrali PCI.\n"
-"Je�li je odnajdzie i rozpozna, kt�re sterowniki nale�y u�y�\n"
-"za�aduje je automatycznie.\n"
-"\n"
-"Je�li posiadasz kontroler  SCSI ISA, lub PCI, ale instalator nie\n"
-"wykryje sterownika do niego, zostaniesz zapytany, czy w Twoim\n"
-"systemie istnieje kontroler SCSI. Je�li nie masz �adnego, odpowiedz\n"
-"\"Nie\", je�li masz jeden lub wi�cej, odpowiedz \"Tak\". Uka�e si�\n"
-"w�wczas lista sterownik�w, z kt�rej nale�y wybra� w�a�ciwy.\n"
-"\n"
-"\n"
-"Po wybraniu sterownika, instalator spyta Ci�, czy chcesz okre�li�\n"
-"opcje dla niego. Pozw�l sterownikowi automatycznie wykry� \n"
-"ustawienia, zazwyczaj dzia�a to dobrze\n"
-"\n"
-"\n"
-"Je�li nie, podaj sterownikowi opcje znalezione w dokumentacji,\n"
-"na stronie producenta sprz�tu (je�li masz dost�p do Internetu)\n"
-"lub takie, jak w Windows (je�li je posiadasz). Podr�cznik instalacji\n"
-"pomo�e Ci odnale�� potrzebne parametry."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Wybierz dysk, kt�ry chcesz wykasowa�, by za�o�y� na nim\n"
-"partycje Mandrake Linux. Pami�taj, �e wszystkie dane z tego\n"
-"dysku zoastan� utracone bez mo�liwo�ci odzyskania."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Wybierz \"OK\", je�li chcesz usun�� dane na wszystkich partycjach\n"
-"istniej�cych na dysku. Pami�taj, po wybraniu \"OK\", nie b�dzie\n"
-"mo�liwe odzyskanie �adnych danych z partycji (tak�e Windows)\n"
-"\n"
-"\n"
-"Wybierz \"Anuluj\", by anulowa� t� operacj� bez utraty danych."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Wybrano nast�puj�ce serwery: %s\n"
-"\n"
-"\n"
-"B�d� one domy�lnie uruchamiane. Nie zawieraj� one �adnych znanych b��d�w\n"
-"zwi�zanych z bezpiecze�stwem, lecz mog� one zosta� w przysz�o�ci ujawnione.\n"
-"W takiej sytuacji nale�y dokona� jak najszybszego uaktualnienia.\n"
-"\n"
-"\n"
-"Czy na pewno chcesz zainstalowa� te serwery?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nie u�ywaj rozg�aszania przy braku domeny NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "W�� sformatowan� (FAT) dyskietk� do stacji %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ten dysk nie jest sformatowany."
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"By u�y� zapisanej list� pakiet�w, nale�y uruchomi� instalacj� z opcj� "
-"''linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "B��d odczytu pliku %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Cz�� sprz�tu w Twoim komputerze wymaga \"firmowych\" sterownik�w.\n"
-"Wi�cej informacji na ten temat uzyskasz z %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Musisz mie� partycj� root.\n"
-"W tym celu, utw�rz partycj� ( lub kliknij na istniej�c�),\n"
-"nast�pnie Wybierz \"Punkt montowania\" `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Musisz mie� partycj� wymiany (swap)"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nie masz partycji swap\n"
-"\n"
-"Kontynuowa� mimo to?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Musisz mie� partycj� FAT zamontowan� w /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Wykorzystaj wolne miejsce"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Brak wolnego miejsca do stworzenia nowych partycji"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "U�yj istniej�cej partycji"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Brak istniej�cych partycji do wykorzystania"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Wykorzystaj miejsce na partycji Windows na plikopartycj�"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kt�r� partycj� chcesz u�y� dla Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Okre�l rozmiary"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Rozmiar partycji root w MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Rozmiar partycji swap w MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Wykorzystaj wolne miejsce na partycji Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kt�r� partycj� chcesz zmniejszy�?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Obliczanie granic systemu plik�w Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Program zmniejszaj�cy partycj� FAT nie potrafi obs�u�y�\n"
-"Twojej partycji. Wyst�pi� nast�puj�cy b��d: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Twoja partycja Windows jest zbyt sfragmentowana, uruchom \"defrag\""
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"OSTRZE�ENIE!\n"
-"\n"
-"Instalator zmieni teraz rozmiar partycji Windows.\n"
-"Uwa�aj, jest to niebezpieczne. Je�li wcze�niej tego nie zrobi�e�,\n"
-"nale�y przerwa� instalacj�, wr�ci� do Windows, zeskanowa�\n"
-"i zdefragmentowa� dysk po czym powt�rnie uruchomi� instalacj�. \n"
-"Warto r�wnie� zarchiwizowa� dane na dysku.\n"
-"Je�li jeste� pewny, wybierz OK."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Jaki ma by� docelowy rozmiar partycji Windows?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partycja %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Zmiana rozmiaru partycji FAT nie powiod�a si�: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nie ma partycji FAT do zmiany rozmiaru lub u�ycia jako plikopartycj�n(lub "
-"brak wolnego miejsca)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Wyma� ca�y dysk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Usu� Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Masz wi�cej ni� 1 dysk twardy, na kt�rym z nich chcesz zainstalowa� linuxa?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"WSZYSTKIE istniej�ce partycje i dane na nich zostan� usuni�te z dysku %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Zaawansowany podzia� na partycje"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "U�yj fdiska"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Mo�esz teraz tworzy� partycje  %s \n"
-"Gdy sko�czysz, pami�taj o zapisaniu u�ywaj�c `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Masz za ma�o wolnego miejsca na partycji Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Brak miejsca na instalacj�"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Kreator podzia�u na partycje proponuje nast�puj�ce rozwi�zania:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partycjonowanie nie powiod�o si�: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Uruchamianie sieci"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Zatrzymywanie sieci"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Wyst�pi� jaki� b��d. Nie mo�na poprawnie go obs�u�y�\n"
-"Kontynuuj na w�asn� odpowiedzialno��."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Powielony punkt montowania %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Pewne istotne pakiety nie zosta�y poprawnie zainstalowane.\n"
-"Prawdopodobnie uszkodzona jest p�yta lub nap�d CDROM.\n"
-"Sprawd� p�yt� w innym komputerze u�ywaj�c polecenia:\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Witamy w %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Niedost�pna stacja dyskietek"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Przechodz� do kroku `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Tw�j system ma ma�o zasob�w. Mog� wyst�pi� problemy z instalacj�.\n"
-"Je�li tak si� stanie, spr�buj instalacji w trybie tekstowym.\n"
-"By j� uruchomi�, naci�nij F1 podczas startu z CD i wpisz \"text\"."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Klasa instalacji"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Wybierz jedn� z nast�puj�cych klas instalacji:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ca�kowity rozmiar dla wybranych grup to oko�o %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Je�eli chcesz zainstalowa� mniej,\n"
-"podaj procentowo rozmiar, kt�ry mo�esz przeznaczy� na instalacj�.\n"
-"Ma�y procent spowoduje instalacj� tylko najwa�niejszych pakiet�w,\n"
-"100%% spowoduje zainstalowanie wszystkich wybranych pakiet�w."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Masz miejsce na dysku tylko na %d%% pakiet�w.\n"
-"\n"
-"Je�li chcesz zainstalowa� mniej, okre�l procentowo, ile pakiet�w\n"
-" chcesz zainstalowa�. Ma�y procent spowoduje instalacj� tylko\n"
-"najwa�niejszych pakiet�w,\n"
-"Wyb�r  %d%% spowoduje zainstalowanie tylu pakiet�w ile si� da."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "W nast�pnym kroku mo�na b�dzie wybra� bardziej precyzyjnie"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procent pakiet�w do instalacji"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Wyb�r grup pakiet�w"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Samodzielny wyb�r pakiet�w"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ca�kowity rozmiar: %d  / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pakiet uszkodzony"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nazwa: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Wersja: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Rozmiar: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Wa�no��: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Nie mo�esz wybra� tego pakietu. Nie ma ju� miejsca, by go zainstalowa�"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Zostan� zainstalowane nast�puj�ce pakiety"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Zostan� usuni�te nast�puj�ce pakiety"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Nie mo�na zmieni� statusu tego pakietu."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ten pakiet jest konieczny, nie mo�na go pomin��"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nie mo�na odznaczy� tego pakietu. Zosta� ju� zainstalowany."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ten pakiet musi by� uaktualniony.\n"
-"Jeste� pewien, �e chcesz go odznaczy�?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Nie mo�na odznaczy� tego pakietu. Musi zosta� zamieniony na nowszy"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Poka� automatycznie wybrane pakiety"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalacja"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Odczytaj/Zapisz na dyskietk�"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Uaktualnianie listy wybranych pakiet�w"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimalna instalacja"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Wybierz pakiety do zainstalowania"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalowanie"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Szacowanie"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Pozosta�o czasu "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Prosz� czeka�, trwa przygotowywanie instalacji"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakiet�w"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalowanie pakietu %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Akceptuj"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Odrzu�"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Zmie� p�yt� CD!\n"
-"\n"
-"W�� p�yt� zatytu�owan� \"%s\" do kieszeni czytnika i naci�nij Ok.\n"
-"Je�li jej nie masz, naci�nij Anuluj, by omin�� instalacj� pakiet�w z niej"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Kontynuowa�?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Wyst�pi� b��d porz�dkowania pakiet�w:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Wyst�pi� b��d podczas instalowania pakiet�w:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Wyst�pi� b��d"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Chcesz zrestartowa� sie�?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Umowa licencyjna"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klawiatura"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Wybierz uk�ad klawiatury."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Oto lista dost�pnych uk�ad�w klawiatury"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Okre�l klas� instalacji"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalacja/Uaktualnienie"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Czy to instalacja, czy uaktualnienie?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Zalecana"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Dla eksperta"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Uaktualnienie"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Uaktualnianie listy wybranych pakiet�w"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Wybierz typ myszy."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port myszy"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Do kt�rego portu szeregowego jest pod��czona mysz?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulacja przycisk�w"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulacja 2 przycisku"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulacja 3 przycisku"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfiguracja kart PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfiguracja IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "brak dost�pnych partycji"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Przeszukiwanie partycji w celu okre�lenia punkt�w montowania"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Wybierz punkty montowania"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nie mo�na odczyta� tablicy partycji, jest zbyt uszkodzona :(\n"
-"Mo�na kontynuowa� USUWAJ�C WSZYSTKIE DANE\n"
-"Innym rozwi�zaniem jest zabronienie instalatorowi modyfikowania tabeli "
-"partycji\n"
-" (wyst�pi� b��d: %s)\n"
-"\n"
-"Czy zgadzasz si� na utrat� wszystkich partycji?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Instalator nie mo�e odczyta� poprawnie tablicy partycji.\n"
-"Kontynuuj na w�asn� odpowiedzialno��!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Brak wolnej przestrzeni na 1MB bootstrap. Instalacja b�dzie kontynuowana,\n"
-"lecz nale�y utworzy� partycj� bootstrap."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-"Nie znaleziono partycji root, na kt�rej mo�na przeprowadzi� aktualizacj�"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partycja root"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Kt�ra partycja jest w Twoim systemie partycj� root (/)"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Nale�y zrestartowa� komputer w celu uaktywnienia zmian w tablicy partycji"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Wybierz partycje do sformatowania"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Sprawdzi� fizycznie partycje?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatowanie partycji"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Tworzenie i formatowanie plikopartycji %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Wielko�� partycji wymiany jest niewystarczaj�ca, nale�y j� zwi�kszy�"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Wyszukiwanie dost�pnych pakiet�w"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Wyszukiwanie pakiet�w do uaktualnienia"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Zbyt ma�o miejsca na instalacj� lub uaktualnienie (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Pe�na (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimalna (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Zalecana (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Prosz� wybra� odczytanie lub zapis listy wybranych pakiet�w\n"
-"na dyskietk�. Format jest identyczny z dyskiem automatycznej\n"
-"instalacji."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Odczytaj z dyskietki"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Odczytywanie z dyskietki"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Wyb�r pakiet�w"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "W�� dyskietk� zawieraj�c� list� wybranych pakiet�w"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Zapisz na dyskietk�"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Wybrany rozmiar przekracza dost�pne miejsce"
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Wybierz pakiety do zainstalowania"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Czekaj"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Je�eli masz wszystkie p�yty CD z listy, kliknij Ok.\n"
-"Je�eli nie masz �adnej z p�yt z listy, kliknij Anuluj.\n"
-"Je�eli niekt�rych p�yt z listy nie masz, odznacz je i kliknij  Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM oznaczony \"%s\" "
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Przygotowywanie instalacji"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalowanie pakietu %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Konfiguracja poinstalacyjna"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "W�� dyskietk� startow� do stacji %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "W��  dyskietk� z uaktalnionymi modu�ami do stacji %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Masz teraz mo�liwo�� pobrania z sieci oprogramowania, s�u��cego do "
-"szyfrowania\n"
-"\n"
-"OSTRZE�ENIE:\n"
-"Z powodu r�nych ogranicze� prawnych maj�cych zastosowanie do \n"
-"tego oprogramowania, Klient lub (i) u�ytkownik powinien by� pewien,\n"
-"�e przepisy go dotycz�ce pozwalaj� na kopiowanie, przechowywanie\n"
-"i u�ywanie tego oprogramowania.\n"
-"\n"
-"Dodatkowo klient lub (i) u�ytkownik, powinien by� ostrze�ony,\n"
-"aby nie z�ama� praw obowi�zuj�cych w jego jurysdykcji.\n"
-"Je�eli klient lub (i) u�ytkownik nie przestrzega�by obowi�zuj�cych \n"
-"go przepis�w, mog� dotkn�� go powa�ne sankcje.\n"
-"\n"
-"Ani Mandrakesoft ani jego producenci lub dostawcy nie s� odpowiedzialni\n"
-"za jakiekolwiek celowe, przypadkowe lub po�rednie szkody\n"
-"powsta�e z u�ywania, posiadania lub tylko zainstalowania oprogramowania,\n"
-"do kt�rego klient lub (i) u�ytkownik b�dzie mia� dost�p po wyra�eniu \n"
-"zgody na powy�sze zastrze�enia .\n"
-"Wszystkie zapytania, dotycz�ce niniejszego uzgodnienia prosz� kierowa� do:\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "��czenie z mirrorem - pobieranie listy dost�pnych pakiet�w"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Wybierz mirror, z kt�rego chcesz pobra� pakiety"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "��czenie z mirrorem - pobieranie listy dost�pnych pakiet�w"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Wybierz swoj� stref� czasow�."
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Ustawienie zegar sprz�towego na czas GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatyczna synchronizacja czasu (przy u�yciu NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Serwer NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Zdalny serwer CUPS"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Brak drukarki"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Masz inne?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "R�ne"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mysz"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Strefa czasowa"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Drukarka"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Karta ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Karta d�wi�kowa"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Karta TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Pliki lokalne"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Has�o roota"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez has�a"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "To has�o jest zbyt proste ( musi by� co najmniej %d znak�w)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentykacja"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Autentykacja LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Serwer LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Autentykacja NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Domena NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Serwer NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Dysk startowy umo�liwia uruchomienie systemu Linux niezale�nie od "
-"normalnego\n"
-"programu rozruchowego. Jest u�yteczny, je�li nie chcesz instalowa� SILO,\n"
-"lub SILO w Twoim systemie nie dzia�a oraz je�li inny system operacyjny\n"
-"usun�� SILO. Dysk u�ytkownika mo�na tak�e u�ywa� z obrazem ratunkowym,\n"
-"u�atwiaj�c naprawienie systemu w przypadku awarii.\n"
-"Je�li chcesz utworzy� dysk startowy dla swojego systemu, w�� dyskietk�\n"
-"do stacji i wybierz \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Pierwsza stacja dyskietek"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Druga stacja dyskietek"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Pomi�"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Dysk startowy umo�liwia uruchomienie systemu Linux niezale�nie od\n"
-"normalnego programu rozruchowego. Jest u�yteczny, je�li nie chcesz\n"
-"instalowa� LILO/Grub, lub programy te w Twoim systemie nie dzia�aj�\n"
-"oraz je�li inny system operacyjny usun�� LILO/grub.\n"
-"Dysku tego mo�na tak�e u�ywa� z obrazem ratunkowym,\n"
-"u�atwiaj�c naprawienie systemu w przypadku awarii.\n"
-"Czy chcesz dla swojego systemu utworzy� dysk startowy?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Niestety, stacja dyskietek jest niedost�pna."
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Wybierz stacj� dyskietek, kt�rej u�yjesz do stworzenia dysku startowego"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "W�� dyskietk� do stacji %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Tworzenie dysku startowego"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Przygotowanie programu rozruchowego"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Czy chcesz u�ywa� aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"B��d podczas instalowania aboot. \n"
-"Wymusi� instalacj�, nawet gdyby grozi�o to zniszczeniem pierwszej partycji?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Program rozruchowy"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Instalacja programu rozruchowego nie powiod�a si�. Wyst�pi� nast�puj�cy b��d:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "W�� pust� dyskietk� do stacji %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Tworzenie dyskietki automatycznej instalacji"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Pewne etapy instalacji nie zosta�y zako�czone\n"
-"\n"
-"Czy na pewno chcesz teraz zako�czy�?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulacje, instalacja zosta�a zako�czona.\n"
-"Usu� p�yt� i (lub) dyskietk� z nap�d�w i naci�nij enter, by zrestartowa�.\n"
-"\n"
-"\n"
-"Informacje o poprawkach dotycz�cych tej wersji Mandrake Linux\n"
-"znajdziesz na stronach\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informacje o konfiguracji systemu znajduj� si�\n"
-"w Oficjalnym Podr�czniku U�ytkownika Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Tworzenie dyskietki automatycznej instalacji"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automatyczna instalacja mo�e by�, je�li jest taka potrzeba\n"
-"przeprowadzona w spos�b ca�kowicie samodzielny.\n"
-"Zajmie ona w�wczas ca�y dysk,\n"
-"co ma znaczenie przy instalacj na innym komputerze.\n"
-"\n"
-"Mo�na za�yczy� sobie odtworzenia instalacji.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatyczna"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Odtw�rz ponownie"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Zapisz list� wybranych pakiet�w"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalacja Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> mi�dzy element.  | <Spacja> wyb�r | <F12> nast�pny ekran "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "brakuje kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Wybierz czynno��"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Zaawansowane"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Prosz� czeka�"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informacje"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Rozwi� drzewo"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Zwi� drzewo"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Prze��cz mi�dzy p�askim i grupowym sortowaniem"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Z�y wyb�r, spr�buj ponownie\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Tw�j wyb�r? (domy�lnie %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Tw�j wyb�r? (domy�lnie %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opcje: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Czy chcesz u�ywa� aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Tw�j wyb�r? (domy�lnie %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "czeski (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "niemiecki"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvoraka"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "hiszpa�ski"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "fi�ski"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "francuski"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "norweski"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "polski"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "rosyjski"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "szwedzki"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "angielski"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "ameryka�ski"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "alba�ski"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "arme�ski (stary)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "arme�ski - fonetyczny"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "arme�ski - fonetyczny"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "azerski (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "belgijski"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "arme�ski - fonetyczny"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "bu�garski"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "brazylijski(ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "bia�oruski"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "szwajcarski (uk�ad niemiecki)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "szwajcarski (uk�ad francuski)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "czeski (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "niemiecki ( bez martwych klawiszy)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "du�ski"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvoraka (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvoraka (norweski)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvoraka (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "esto�ski"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "gruzi�ski (uk�ad rosyjski)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "gruzi�ski (uk�ad �aci�ski)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "grecki"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "w�gierski"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "chorwacki"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "izraelski"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "izraelski (fonetyczny)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Ira�ski"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "islandzki"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "w�oski"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "japo�ski 106 klawiszy"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "korea�ski"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "latyno-ameryka�ski"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "litewski AZERTY"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "litewski AZERTY"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "litweski QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "litewski QWERTY - fonetyczny"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Lokalizacja"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedo�ska"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "holenderski"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "polski (programisty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "polski (maszynistki)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "portugalski"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "kanadyjski (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "rumu�ski (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "rumu�ski (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "rosyjski (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "s�owe�ski"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "s�owacki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "s�owacki (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "azerski (cyrilic)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabela"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "tajski"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "tajski"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "turecki"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "turecki (nowy)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "ukrai�ski"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "ameryka�ski (mi�dzynarodowy)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "wietnamski QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "jugos�owia�ski - (�aci�ski/cyrylica)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Zap�tlone montowanie %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Zacznij od usuni�cia logicznych dysk�w (LV)\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Mysz Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mysz standardowa PS/2 z k�kiem"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1-przyciskowa"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Mysz standardowa 2-przyciskowa"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Standardowa"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "z k�kiem"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "szeregowa"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Mysz standardowa 3-przyciskowa"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech seria CC"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "Seria MM"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet (szeregowy)"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Mysz Logitech (szeregowa, stary typ C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2-przyciskowa"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3-przyciskowa"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "brak"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Brak myszy"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Przetestuj mysz"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "By uaktywni� mysz,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "RUSZ KӣKIEM!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Zako�cz"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Dalej ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Poprzedni"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Dzia�a prawid�owo?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Po��czenie z Internetem"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Njabardziej typowym sposobem po��czenia przez ADSL jest ppoe.\n"
-"Isteniej� jednak po��czenia u�ywaj�ce pptp oraz nieliczne - dhcp.\n"
-"Je�li nie wiesz, wybierz \"u�yj pppoe\""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "u�yj dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "u�yj pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "u�yj pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Jaki program klienta DHCP chcesz u�y�?\n"
-"Domy�lnym jest dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nie wykryto w systemie karty sieciowej.\n"
-"Nie mo�na skonfigurowa� tego typu po��czenia."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Wybierz interfejs sieciowy"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Prosz� wybra� kart� sieciow� kt�r� chcesz u�y� do po��czenia z Internetem"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nie znaleziono karty sieciowej"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfiguracja sieci"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Prosz� wpisa� nazw� komputera, je�li j� znasz\n"
-"Niekt�re z serwer�w DHCP wymagaj� jej do dzia�ania.\n"
-"Nazwa ta powinna by� w postaci pe�nej,\n"
-"np. \"mojkomputer.mojadomena.pl\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nazwa komputera"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Kreator konfiguracji sieci"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Zewn�trzny modem ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Wewn�trzna karta ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Okre�l rodzaj po��czenia ISDN"
-
-#: ../../network/isdn.pm_.c:45
-#, fuzzy
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Jaki spos�b konfiguracji ISDN preferujesz?\n"
-"\n"
-"* Stary spos�b konfiguracji przy u�yciu isdn4net. Wykorzystuje narz�dzia\n"
-"o du�ych mo�liwo�ciach, lecz jest niestandardowy i podst�pny dla "
-"pocz�tkuj�cych\n"
-"\n"
-"* Nowy spos�b konfiguracji jest �atwiejszy do zrozumienia, bardziej "
-"standardowy,\n"
-"lecz daje mniej narz�dzi.\n"
-"\n"
-"Zalecany jest nowy spos�b konfiguracji.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nowa konfiguracjia (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracji (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Konfiguracja ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Wybierz swojego dostawc� Internetu.\n"
-"Je�li nie ma go na li�cie, wybierz \"Unlisted\""
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protok� uruchamiania"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Reszta �wiata"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Reszta �wiata \n"
-" bez kana�u D (linie dzier�awione)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Jakiego protoko�u chcesz u�y�?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Jaki rodzaj karty posiadasz?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Nie wiem"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Je�li posiadasz kart� ISA, warto�ci na nast�pnym ekranie\n"
-"powinny by� odpowiednie\n"
-"Je�li posiadasz kart� PCMCIA, powiniene� zna� IRQ i IO swojej karty.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Przerwij"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Kontynuuj"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Wybierz swoj� kart� ISDN"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Wykryto kart� ISDN PCI nieznanego typu. Prosz� wybra� jedn� z listy na "
-"kolejnym ekranie."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nie wykryt� �adnej karty ISDN PCI. Prosz� wybra� jedn� z listy na kolejnym "
-"ekranie."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Wska� port szeregowy, do kt�rego pod��czony jest modem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opcje dzwonienia"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nazwa po��czenia"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Numer telefonu"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Identyfikator"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Oparta o skrypt"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Poprzez terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domena"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Pierwszy serwer DNS (opcjonalnie)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Drugi serwer DNS (opcjonalnie)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo�esz roz��czy� si� lub zrekonfigurowa� po��czenie."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Mo�esz zrekonfigurowa� po��czenie."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Jeste� ju� po��czony z Internetem."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo�esz po��czy� si� z Internetem lub zrekonfigurowa� po��czenie."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Nie jeste� teraz po��czony z Internetem."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Po��cz"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Roz��cz"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Konfiguracja sieci"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internet - po�aczenie i konfiguracja"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "B�dziemy teraz konfigrowa� po��czenie %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"B�dziemy teraz konfigurowa� po��czenie %s.\n"
-"\n"
-"\n"
-"By rozpocz��, naci�nij Dalej."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Konfiguracja sieci"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Poniewa� przeprowadzasz instalacj� przez sie�, jest ona ju� skonfigurowana.\n"
-"Wybierz OK by zachowa� konfiguracj�, lub Anuluj by ponownie skonfigurowa� "
-"sie�/po��czenie z Intenetem.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Witaj w Kreatorze Konfiguracji Sieci\n"
-"\n"
-"S�u�y on do konfiguracji po��czenia z Intenetem lub inn� sieci�.\n"
-"Je�li nie chcesz korzysta� z autodetekcji, odznacz to pole.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Wybierz profil do konfiguracji"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "U�yj autodetekcji"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Wykrywanie urz�dze�..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Po��czenie modemowe"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "wykryto na porcie %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Po��czenie ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "wykryto %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Po��czenie ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "wykryto na interfejsie %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Po��czenie przez kabl�wk�"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "wykryto po��czenie przez kabl�wk�"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Sie� lokalna"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "wykryto kart�(y) ethernet"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Wybierz po��czenie, kt�re chcesz skonfigurowa�"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Skonfigurowano r�ne sposoby po��czenia z Internetem.\n"
-"Wybierz ten, z kt�rego chcesz korzysta�.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Po��czenie z Internetem"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Czy chcesz ��czy� si� Internetem przy uruchamianiu komputera?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Konfiguracja sieci"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Wyst�pi� problem podczas restartowania sieci: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gratulacje, konfiguracja sieci i Internetu zosta�a zako�czona.\n"
-"\n"
-"Zostanie teraz zapisana w twoim systemie.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Po zako�czeniu zalecane jest zrestartowanie X w celu omini�cia\n"
-"problemu wynikaj�cego ze zmian� nazwy hosta."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"OSTRZE�ENIE: Urz�dzenie to zosta�o poprzednio skonfigurowane do po��czenia z "
-"Internetem.\n"
-"Naci�nij po prostu OK by zachowa� konfiguracj�.\n"
-"Modyfikacja p�l poni�ej spowoduje nadpisanie istniej�cej konfiguracji."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Prosz� poda� konfiguracj� IP dla komputera.\n"
-"Ka�da pozycja powinna by� wpisana w zapisie dziesi�tnym\n"
-"oddzielonym kropkami (np. 192.168.1.1)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfiguracja urz�dzenia sieciowego %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (sterownik %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Adres IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Maska"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatyczne IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Adres IP powinien by� w formacie typu 192.168.1.1"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Prosz� wpisa� nazw� komputera.\n"
-"Nazwa ta powinna by� w postaci pe�nej,\n"
-"np. \"mojkomputer.mojadomena.pl\".\n"
-"Je�li jest to potrzebne, nale�y wpisa� te� adres routera."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Serwer DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Interfejs (np. eth0)"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Konfiguracja po�rednika (proxy)"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Po�rednik HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Po�rednik FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Nazwa po�rednika powinna by� typu: http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Nazwa po�rednika powinna by� typu: ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Czy chcesz teraz spr�bowa� po��czy� si� Internetem?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testowanie po��czenia..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Jeste� teraz po��czony z Internetem."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Ze wzgl�du na bezpiecze�stowo po��czenie zostanie teraz roz��czone."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Po��czenie z Internetem nie uda�o si�.\n"
-"Spr�buj zmieni� konfiguracj� po��czenia."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konfiguracja po��czenia"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Wype�nij lub zaznacz pole poni�ej"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ karty"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "DMA karty"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO karty"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 karty"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 karty"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Numer Twojego telefonu"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nazwa dostawcy us�ug (np. Dialog, Netia, TPSA)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Numer telefonu dostawcy us�ug"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "1 DNS dostawcy (opcjonalnie)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "2 DNS dostawcy (opcjonalnie)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Wyb�r klawiatury"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Spos�b wybierania"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Szybko�� po��czenia"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Czas po��czenia:"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Konto (nazwa u�ytkownika)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Has�o:"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "nieudane montowanie: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Na tej platformie nie istniej� partycje rozszerzone"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"W tablicy partycji jest puste miejsce pomi�dzy partycjami, kt�rego\n"
-"nie mo�na wykorzysta�. Jedynym rozwi�zaniem jest przesuni�cie\n"
-"partycji podstawowych, by puste miejsce by�o obok partycji rozszerzonych"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Przywracanie z pliku %s nie powiod�o si�: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "B��d zapisu do pliku %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Z Twoim dyskiem dzieje si� co� niedobrego. \n"
-"Nie powi�d� si� test sp�jno�ci danych. \n"
-"Oznacza to, �e zapisanie czegokolwiek na dysku mo�e si� �le sko�czy�"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "musisz mie�"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "wa�ny"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "bardzo fajny"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "fajny"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "taki sobie"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Drukarka lokalna"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Drukarka sieciowa"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Zdalny serwer CUPS"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Sieciowy serwer lpd"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Drukarka sieciowa (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Serwer wydruku"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Port drukarki URI:"
-
-#: ../../printer.pm_.c:55
-#, fuzzy
-msgid "Pipe job into a command"
-msgstr "Potok do polecenia"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Drukarka lokalna"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Drukarka sieciowa"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "B��d zapisu do pliku %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, fuzzy, c-format
-msgid ", using command %s"
-msgstr "Potok do polecenia"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modu� %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP serwera CUPS"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Domy�lne)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Wybierz spos�b pod��czenia drukarki"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Jak jest pod��czona drukarka?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Korzystaj�c z sieciowego serwera CUPS nie musisz tutaj\n"
-"konfigurowa� �adnych drukarek; zostan� one automatycznie\n"
-"wykryte, chyba �e znajduje si� on w innej sieci, w tym przypadku\n"
-"nale�y poda� adres serwera CUPS oraz opcjonalnie numer portu."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Konfiguracja sieci lokalnej"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Zdalny serwer CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Adres IP powinien by� w formacie typu 192.168.1.1"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Numer portu powinien by� liczb�"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP serwera CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Konfiguracja sposobu uruchamiania"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Wykrywanie urz�dze�..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Testowanie port�w"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Dodaj drukark�"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Drukarka lokalna"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "U�yj autodetekcji"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "wykryto %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Port drukarki URI:"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Drukarka lokalna"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Wska� port szeregowy, do kt�rego pod��czony jest modem."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Port drukarki URI:"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Konfiguracja kolor�w"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instalowanie pakietu %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instalowanie pakietu %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Odczytywanie bazy sterownik�w CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Odczytywanie bazy sterownik�w CUPS..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opcje drukarki sieciowej lpd"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"By u�ywa� kolejki drukarki sieciowej lpd nale�y poda�\n"
-"nazw� serwera wydruku oraz nazw� kolejki na\n"
-"serwerze, do kt�rej kierowane b�d� zadania wydruku."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nazwa serwera:"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Nazwa serwera: brak nazwy!"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nazwa serwera: brak nazwy!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcje drukarki SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"By drukowa� na drukarce SMB, musisz okre�li� nazw� serwera SMB\n"
-"(nie zawsze jest ona r�wnoznaczna z nazw� TCP/IP), o ile mo�liwe\n"
-"adres IP serwera wydruku,nazw� u�ytkownika, grup�, has�o oraz\n"
-"oczywi�cie nazw� drukarki."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Nazwa serwera SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP serwera SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nazwa drukarki"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grupa"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Nale�y podac nazw� serwera lub jego adres IP!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Brakuje nazwy udzia�u Samby!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opcje drukarki NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"By drukowa� na drukarce NetWare, nale�y poda� nazw� serwera\n"
-"wydruku NetWare (nie zawsze to samo co nazwa TCP/IP!),\n"
-"nazw� kolejki drukarki, do kt�rej chcesz uzyska� dost�p,\n"
-"oraz w�a�ciw� nazw� u�ytkownika i has�o."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Serwer wydruku"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nazwa kolejki drukarki"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Brakuje nazwy serwera NCP!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Brakuje nazwy kolejki NCP!"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Opcje drukarki sieciowej"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"By drukowa� na drukarce sieciowej, nale�y poda�\n"
-"nazw� sieciow� drukarki oraz opcjonalnie numer portu."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Nazwa sieciowa drukarki"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Brakuje nazy drukarki sieciowej!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Port drukarki URI:"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "A valid URI must be entered!"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Ka�da drukarka musi mie� nazw� (na przyk�ad lp).\n"
-"Pola Opis i Lokalizacja nie musz� byc wype�niane.\n"
-"S� to komentarze dla u�ytkownik�w."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nazwa drukarki"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Opis"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lokalizacja"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Odczytywanie bazy sterownik�w CUPS..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Dzia�a prawid�owo?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Wyb�r modelu drukarki"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Jaki model drukarki posiadasz?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, fuzzy, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Port musi by� dodatni� liczb� ca�kowit�!"
-
-#: ../../printerdrake.pm_.c:1521
-#, fuzzy, c-format
-msgid "Option %s must be a number!"
-msgstr "Port musi by� dodatni� liczb� ca�kowit�!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Czy chcesz wydrukowa� stron� testow�?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Testowanie port�w"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Drukarka"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standardowa"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Drukowanie stron/y testowych/ej"
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Drukowanie stron/y testowych/ej"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Drukowanie stron/y testowych/ej"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Drukowanie stron/y testowych/ej"
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Strona testowa zosta�a wys�ana do demona drukowania.\n"
-"Mo�e chwil� potrwa�, zanim pojawi si� wydruk\n"
-"Status drukowania:\n"
-"%s\n"
-"\n"
-"Czy wydruk jest prawid�owy?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Strona testowa zosta�a wys�ana do demona drukowania.\n"
-"Mo�e chwil� potrwa�, zanim pojawi si� wydruk\n"
-"Czy wydruk jest prawid�owy?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Brak drukarki"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Zamknij"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Zatrzymywanie sieci"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Zatrzymywanie sieci"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Opcje drukarki"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Nazwa drukarki powinna zawiera� tylko litery, cyfry i znak podkre�lenia"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Brak drukarki"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Odczytywanie bazy sterownik�w CUPS..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Konfiguracja Lilo/Grub"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Otwieranie po��czenia..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Konfiguracja sieci"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Nie skonfigurowano monitora"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfiguracja sieci"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Jakiego systemu wydruku zamierzasz u�ywa�?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Wysoki"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoidalny"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Jakiego systemu wydruku zamierzasz u�ywa�?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Wybierz system wydruku"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Jakiego systemu wydruku zamierzasz u�ywa�?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfiguracja drukarki"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instalowanie pakietu %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opcje drukarki"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Konfiguracja drukarki"
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Czy chcesz skonfigurowa� drukowanie?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Drukarka"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Istniej� nast�puj�ce kolejki wydruku.\n"
-"Mo�esz doda� nast�pne lub zmieni� istniej�ce."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Istniej� nast�puj�ce kolejki wydruku.\n"
-"Mo�esz doda� nast�pne lub zmieni� istniej�ce."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Konfiguracja sieci"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Tryb zwyk�y"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Chcesz przetestowa� t� konfiguracj�?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Chcesz przetestowa� t� konfiguracj�?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Po��czenie z Internetem"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Wyb�r modelu drukarki"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Drukowanie stron/y testowych/ej"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Chcesz przetestowa� t� konfiguracj�?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Drukarka lokalna"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Chcesz zrestartowa� sie�?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Drukarka sieciowa"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Konfiguracja po�rednika (proxy)"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Narz�dzie do konfiguracji po�rednika.\n"
-"\n"
-"Pozwala na skonfigurowanie po�rednik�w http oraz ftp\n"
-"z (lub bez) nazw� u�ytkownika oraz has�em\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Prosz� wprowadzi� dane po�rednika http ,\n"
-"lub pozostawi� puste, je�li z niego nie korzystasz"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL powinien zaczyna� si� od: http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Numer portu powinien by� liczb�"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Prosz� wprowadzi� dane po�rednika ftp ,\n"
-"lub pozostawi� puste, je�li z niego nie korzystasz"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL powinien zaczyna� si� od: ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Prosz� poda� nazw� u�ytkownika po�rednika\n"
-"oraz has�o lub pozostawi� pola puste"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Nazwa u�ytkownika"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "has�o"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Powt�rz has�o"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Has�a nie zgadzaj� si�. Spr�buj ponownie!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nie mo�na doda� partycji do sformatowanego RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nie mo�na zapisa� pliku %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid pad�"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid pad� ( mo�e brak raidtools)?"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Za ma�o partycji dla RAID poziom %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Uruchamia podsystem d�wi�ku ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron - program uruchamiaj�cy okresowo zadania."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Apmd przekazuje przez syslog informacje o stanie akumulator�w.\n"
-"Umo�liwia tak�e zamkni�cie systemu, gdy s� one zbyt wy�adowane."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Uruchamia o okre�lonym czasie programy zaplanowane do wykonania komend� \"at"
-"\"\n"
-"oraz wykonuje zadania wsadowe, gdy obci��enie systemu jest niewielkie."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Cron jest standardowym programem unixowym, kt�ry zarz�dza wykonywaniem\n"
-"program�w u�ytkownika w okre�lonych przez niego porach."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM umo�liwia pos�ugiwanie si� mysz� w aplikacjach,\n"
-"pracuj�cych pod konsol� Linuxa jak np. Midnigth Commander.\n"
-"Umo�liwia operacje Wytnij-Wklej oraz wyb�r opcji poprzez wyskakuj�ce menu."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake przeprowadza wykrywanie sprz�tu oraz opcjonalnie \n"
-"konfiguruje nowy lub zmieniony sprz�t."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache to serwer WWW. Jest u�ywany do udost�pniania plik�w \n"
-"HTML i CGI w Internecie/Intranecie."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internetowy (super)demon, zwany inetd startuje wiele us�ug internetowych,\n"
-"takich jak telnet, ftp, rsh i rlogin.\n"
-" Wy��czenie go uniemo�liwia korzystanie z tych us�ug."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Uruchomienie filtrowania pakiet�w dla kernela Linuxa w wersji 2.2\n"
-"zabezpiecza komputer przed atakiem z sieci."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ten pakiet �aduje wybrane mapowania klawiatury, zgodnie z zawarto�ci�\n"
-"pliku /etc/sysconfig/keyboard. Mog� one by� prze��czane przy pomocy\n"
-"narz�dzia kbdconfig. Powinien by� uruchomiony w wi�kszo�ci przypadk�w."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatyczna regenracja nag��wk�w kernela w /boot\n"
-"dla /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatyczne wykrywanie i konfiguracja sprz�tu przy uruchomieniu"
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"LinuxConf umo�liwia przeprowadzenie podczas uruchamiania\n"
-"r�nych zada� zwi�zanych z konserwacj� systemu."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Lpd to demon, konieczny do prawid�owego dzia�ania lpr,a przez to ca�ego \n"
-"systemu drukowania."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Wirtualny Serwer linuxowy u�ywane jest przy tworzeniu bardzo wydajnych\n"
-"serwer�w o du�ej niezwodno�ci."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Named (BIND) to DNS -czyli serwer, umo�liwiaj�cy t�umaczenie\n"
-"nazw komputer�w na ich adresy IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montuje i odmontowuje wszystkie punkty zamontowania system�w plik�w \n"
-"NFS ( sieciowe systemy plik�w), SMB {LAN Manager/Windows} i NCP ( NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"W��cza/wy��cza skonfigurowane interfejsy sieciowe\n"
-"podczas uruchamiania systemu."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS jest popularnym protoko�em udost�pniania plik�w w sieci TCP/IP.\n"
-"Ta us�uga uruchamia konfigurowany przez plik /etc/exports serwer NFS."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS jest popularnym protoko�em udost�pniania plik�w w sieci TCP/IP.\n"
-"Ta us�uga umo�liwia dzia�anie w NFS funkcji blokowania plik�w."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatycznie w�acza klawiatur� numeryczn� przy uruchamianiu \n"
-"w trybie konsoli oraz graficznym."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-"Zapewnia obs�ug� drukarek OKI dla Windows\n"
-"oraz kompatybilnych windrukarek."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA u�ywany jest zwykle do obs�ugi kart ethernetowych i modem�w\n"
-"w laptopach. Nie jest uruchamiany, je�eli si� go nie skonfiguruje\n"
-"a wi�c bezpiecznie mo�e by� instalowany nawet na maszynach, kt�re go nie \n"
-"potrzebuj�."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper zarz�dza po��czeniami RPC, u�ywanymi przez protoko�y takie, jak\n"
-"NFS i NIS. Je�eli Twoja maszyna jest serwerem dla protoko��w, kt�re \n"
-"wykorzystuj� RPC, nale�y go uruchomi� na starcie."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix to agent pocztowy (MTA),\n"
-"przesy�aj�cy poczt� mi�dzy maszynami."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr "Polepsza generacj� liczb pseudolosowych."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Przypisuje \"surowe\" urz�dzenia do urz�dze� blokowych\n"
-"(np dysk�w) dla aplikacji typu Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Demon routed aktualizuje automatycznie tablic� routingu IP wykorzystuj�c\n"
-"stosowany w ma�ych sieciach protok� RIP. W wi�kszych sieciach stosuje\n"
-"si� bardziej z�o�one protoko�y routingu."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protok� rstat umo�liwia u�ytkownikowi sieci monitorowanie \n"
-"wydajno�ci innych maszyn w sieci."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Protok� rusers pozwala na sprawdzanie, kto jest zalogowany na innych,\n"
-"dost�pnych maszynach w sieci."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protok� rwho dzia�a jak who ( podaje list� u�ytkownik�w) dla innych maszyn "
-"w sieci.\n"
-"kt�re maj� w��czony demon rwho (podobny do finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Uruchamia podsystem d�wi�ku w komputerze"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog to narz�dzie, pozwalaj�ce r�nym demonom na\n"
-"dokonywanie wpis�w do r�nych plik�w \"dziennikowych\" ( log files).\n"
-"Jego uruchomienie jest zalecane."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "�aduje sterowniki urz�dze� USB."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Uruchamia serwer czcionek (konieczny do dzia�ania XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Wybierz us�ugi automatycznie uruchamiane podczas startu"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Drukarka"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Tryb pracy systemu"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opcje drukarki sieciowej lpd"
-
-# ../../share/compssUsers
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Bazy danych"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "urz�dzenie"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "uruchomione"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zatrzymane"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Us�ugi i demony"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Niestety brak dodatkowych informacji\n"
-"o tej us�udze."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Przy uruchamianiu"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Status:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Reszta �wiata"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Dost�p do Internetu"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedia - Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Programowanie"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Centrum Sterowania"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Interfejs sieciowy"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Nazwa serwera SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Gry"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Dla eksperta"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "niezb�dny"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalowanie pakietu %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nie mo�na odczyta� tablicy partycji, jest zbyt uszkodzona :(\n"
-"Mo�na pr�bowa� kontynuowa� z pustymi partycjami"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "B��d"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Konfiguracja poinstalacyjna"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Konfiguracja sposobu uruchamiania"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratulacje!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalacja"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "U�ytkownicy"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatowanie plikopartycji %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Wyb�r pakiet�w"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Wybierz pakiety do zainstalowania."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Usu� kolejk�"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Usu� Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Identyfikator:"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Przetestuj mysz"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Prosz� spr�bowa� ponownie"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Prosz� spr�bowa� ponownie"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Powt�rz has�o"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Sie� lokalna"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Wybierz spos�b pod��czenia drukarki"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Wybierz uk�ad klawiatury."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Prosz� klikn�� na partycji"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Wybierz pakiety do zainstalowania."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Przetestuj mysz"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Interfejs sieciowy"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Identyfikator:"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Wybierz pakiety do zainstalowania."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Wybierz j�zyk u�ywania systemu"
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "U�y� optymalizacji dysku?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "U�y� optymalizacji dysku?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Czekaj"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "z k�kiem"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "z k�kiem"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Opcje modu�u:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Konfiguracja sieci"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Wybierz pakiety do zainstalowania."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Wybierz pakiety do zainstalowania."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Systemy plik�w"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcje"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Wska� port szeregowy, do kt�rego pod��czony jest modem."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Konfiguracja sieci"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Wybierz typ myszy."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Przywr�� z dyskietki"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Wybierz typ myszy."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Inna"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instalacja pakiet�w"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Przywr�� z pliku"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Przywr�� z pliku"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "U�ytkownika"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/Pomo_c"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Poprzedni"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Status:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Przywr�� z pliku"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Tekst"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Wyb�r pakiet�w"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Wybierz j�zyk u�ywania systemu"
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Wybierz j�zyk u�ywania systemu"
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Wybierz j�zyk u�ywania systemu"
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Zapisz do pliku"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Przetestuj mysz"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Wybierz pakiety do zainstalowania."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Konfiguracja sieci"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Konfiguracja sieci"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Konfiguracja sieci lokalnej"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Konfiguracja sieci lokalnej"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Systemy plik�w"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalacja %s nie powiod�a si�. Wyst�pi� nast�puj�cy b��d:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "nie znaleziono %s "
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Zrobione"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formatuj dyskietk�"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Przygotowywanie instalacji"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "ograniczenie"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatowanie"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Oddnstalowanie pakiet�w"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Konfiguracja sieci lokalnej"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Punkt montowania"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Wybierz partycje do sformatowania"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Biuro"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Przerwij"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Drukarka"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instalacja pakiet�w"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Wybierz plik"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Drukarka sieciowa"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Komunikat startowy"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Nie wykryto w systemie karty sieciowej!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalacja"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Nie wykryto w systemie karty sieciowej!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Wyj�cie z instalacji"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Wsp�dzielenie po��czenia z Internetem"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Wsp�dzielenie po��czenia z Internetem jest w��czone"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfiguracja wsp�dzielenia po��czenia z Internetem zosta�a ju� wykonana.\n"
-"Jest teraz uaktywniona.\n"
-"\n"
-"Co chcesz zrobi�?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "wy��czy�"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "zwolni�"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "rekonfigurowa�"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Wy��czenie serwer�w..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Wsp�dzielenie po��czenia z Internetem jest wy��czone."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Wsp�dzielenie po��czenia z Internetem jest wy��czone"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfiguracja wsp�dzielenia po��czenia z Internetem zosta�a ju� wykonana.\n"
-"Us�uga ta jest teraz wy��czona.\n"
-"\n"
-"Co chcesz zrobi�?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "w��czy�"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "W��czenie serwer�w..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Wsp�dzielenie po��czenia z Internetem jest teraz w��czone"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Mo�na skonfigurowa� komputer jako wsp�dziel�cy po��czenie z Internetem\n"
-"Ta us�uga pozwala innym komputerom w sieci lokalnej na u�ywanie po��czenia\n"
-"tego komputera z Internetem.\n"
-"\n"
-"Uwaga:  wymagana jest dedykowana karta sieciowa w��czaj�ca komputer w sie� "
-"lokaln� (LAN)"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfejs %s (modu� %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfejs %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nie wykryto w systemie karty sieciowej!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nie wykryto w systemie karty sieciowej. Prosz� uruchomi� program "
-"konfiguracji sprz�tu."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interfejs sieciowy"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"W Twoim systemie istnieje tylko jedna skonfigurowana karta sieciowa:\n"
-"\n"
-"%s\n"
-"\n"
-"Mo�na skonfigurowa� sie� lokaln� (LAN) przy wykorzystaniu tej karty."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Wska�, kt�ra karta sieciowa b�dzie po��czona\n"
-"z sieci� lokaln� (LAN)."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Nie skonfigurowano monitora"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Konfiguracja sposobu uruchamiania"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP serwera CUPS"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"W bie��cej konfiguracji wykryto mo�liwy konflikt adres�w sieciowych: %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Wykryto konfiguracj� firewalla!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Ostrze�enie! Zosta�a wykryta istniej�ca konfiguracja firewalla. Mo�e by� "
-"konieczne dokonanie kilku r�cznych poprawek po instalacji. Kontynuowa�?"
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfiguracja..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Konfiguracja skrypt�w, instalowanie program�w, uruchamianie serwer�w..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemy z instalacj� pakietu %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Wszytko zosta�o skonfigurowane.\n"
-"Mo�esz udost�pnia� po��czenie z Internetem innym komputeremw sieci lokalnej, "
-"u�ywaj�c automatycznej konfiguracji sieci (DHCP)"
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Konfiguracja wsp�dzielenia po��czenia  zosta�a ju� wykonana, lecz us�uga ta "
-"jest teraz wy��czona."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Konfiguracja wsp�dzielenia po��czenia z Internetem zosta�a ju� wykonana "
-"jest w��czona"
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Wsp�dzielenie po��czenia z Internetem nie by�o jeszcze konfigurowane."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Konfiguracja wsp�dzielenia po��czenia z Internetem"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Witaj w konfiguratorze wsp�dzielenia po��czenia z Internetem!\n"
-"\n"
-"%s\n"
-"\n"
-"Wybierz Konfiguruj, by uruchomi� kreatora.."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Konfiguracja sieci (%d karty)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Usu� profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil do usuni�cia:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nowy profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nazwa komputera:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Dost�p do Internetu"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Rodzaj: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Router:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfejs:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfiguracja dost�pu do Internetu..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Konfiguracja sieci lokalnej"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Sterownik"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfejs"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protok�"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfiguracja sieci lokalnej..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Kreator..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Zastosuj"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Prosz� czeka�... �adowanie konfiguracji"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Po��czony"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nie po��czony"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Po��cz..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Roz��cz..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nie skonfigurowano jeszcze �adnego interfejsu.\n"
-"Zacznij konfiguracj� przez klikni�cie na \"Konfiguruj\""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Konfiguracja sieci lokalnej"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Karta %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protok� uruchamiania"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Uruchamiany przy starcie"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Klient DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Uaktywnij"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Uaktywnij"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nie skonfigurowano jeszcze �adnego po��czenia z Internetem.\n"
-"Rozpocznij konfiguracj� przez klikni�cie na \"Konfiguruj\""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfiguracja po��czenia z Internetem"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfiguracja po��czenia z Internetem"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Rodzaj po��czenia:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametry"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Router"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Karta ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Klient DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Ustawienie poziomu bezpiecze�stwa"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centrum Sterowania"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Wyb�r u�ywanych narz�dzi"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "kanadyjski (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "islandzki"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "szeregowa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "u�ycie: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Wybierz uk�ad klawiatury."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Czy chcesz u�ywa� BackSpace zamiast Delete dla konsoli?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Zmiana CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"W�� p�yt� Installation CD-Rom do kieszeni czytnika i naci�nij Ok.\n"
-"Je�li jej nie masz, naci�nij Anuluj, by omin�� uaktualnienie."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Nie mo�na uruchomi� uaktualnienia!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Plik/_Nowy"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Plik/_Otw�rz"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Plik/Zapi_sz"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Plik/Z_apisz jako"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Plik/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcje"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcje/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/Pomo_c"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Pomoc/O _programie"
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Identyfikator:"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Komunikat startowy"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Ustawienia"
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "Komputer:"
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "Komputer:"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Konfiguracja Lilo/Grub"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Narz�dzie do konfiguracji po�rednika.\n"
-"\n"
-"Pozwala na skonfigurowanie po�rednik�w http oraz ftp\n"
-"z (lub bez) nazw� u�ytkownika oraz has�em\n"
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache oraz Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "shadow"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "interesuj�cy"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatowanie"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Konfiguracja kolor�w"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Wybierz typ myszy."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nie znaleziono serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulowa� �rodkowy przycisk?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Wybierz kart� graficzn�"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Urz�dzenie startowe"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Konfiguracja zapory sieciowej"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Konfiguracja zapory sieciowej"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Zapora sieciowe\n"
-"\n"
-"Jest ju� skonfigurowana.\n"
-"Wybierz Konfiguruj, by zmieni� lub usun�c jego konfiguracj�"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Zapora sieciowa\n"
-"\n"
-"Wybierz Konfiguruj, by ustawi� standardow� zapor� sieciow�"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Wyb�r j�zyka"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Rodzaj instalacji"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Wykrywanie dysk�w"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfiguracja myszy"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Wyb�r klawiatury"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Bezpiecze�stwo"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Systemy plik�w"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatowanie"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Wyb�r pakiet�w"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalacja pakiet�w"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "U�ytkownicy"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfiguracja sieci"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfiguracja us�ug"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Program rozruchowy"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Dysk startowy"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfiguracja X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instalacja pakiet�w"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Wyj�cie z instalacji"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Konfiguracja zapory sieciowej\n"
-"\n"
-"Narz�dzie to umo�liwia konfguracj� prostej zapory sieciowej.\n"
-"Je�li potrzebujesz silnego dedykowanego rozwi�zania,\n"
-"skorzystaj z dystrybucji Mandrake Security Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Zostanie zadane kilka pyta� dotycz�cych us�ug, kt�re chcesz\n"
-"udost�pnia� w Internecie. Przemy�l odpowiedzi na te pytania,\n"
-"poniewa� bezpiecze�stwo komputera w sieci jest wa�ne.\n"
-"\n"
-"Pami�taj, wy��cz us�ugi, z kt�rych teraz nie korzystasz.\n"
-"Mo�esz w dowolnej chwili zmieni� konfiguracj� powt�rnie\n"
-"uruchomiaj�c ten program!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Czy uruchamiono na tym komputerze serwer WWW, kt�ry ma by� dost�pny\n"
-"z Internetu?. Je�li uruchomiono serwer, kt�ry ma by� dost�pny tylko z tego\n"
-"komputera, mo�esz spokojnie odpowiedzie� tutaj NIE.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Czy uruchomiono serwer nazw (DNS)?\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Czy chcesz umo�liwi� nawi�zywanie przychodz�cych po��cze� ssh?\n"
-"Ssh to nast�pca telneta u�ywany do logowania. Je�li u�ywasz jeszcze "
-"telneta,\n"
-"nale�y ostatecznie przej�� na ssh, poniewa� telnet nie jest szyfrowany,\n"
-"co daje mo�liwo�� pods�uchania has�a i w�amania si� do systemu."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Czy chcesz umo�liwi� nawi�zywanie przychodz�cych po��cze� telnet?\n"
-"Jest to bardzo niebezpieczne, sugerujemy by odpowiedzie� NIE\n"
-"i u�ywa� zamiast telneta ssh.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Czy uruchomiono dost�pny z Internetu serwer FTP?. Je�li tak, zalecamy\n"
-"u�ywanie go tylko do anonimowych transfer�w, poniewa� FTP tak�e nie\n"
-"szyfruje przesy�anych hase�.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Czy uruchomiono serwer pocztowy?. Je�li wysy�asz poczt�\n"
-"korzystaj�c z tekstowych program�w typu pine czy mutt\n"
-"serwer pocztowy prawdopodobnie jest uruchomiony.\n"
-"Je�li nie, nale�y zablokowa� t� us�ug�.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Czy uruchomiono serwer POP lub IMAP? U�ywany jest on do zdalengo\n"
-"odbioru poczty z kont pocztowych za�o�onych na tym komputerze\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Wygl�da na to, �e uruchomiony jest kernel serii 2.2. \n"
-"Je�li Tw�j adres IP jest przyznawany automatycznie,\n"
-"przez inny komputer w biurze lub domu nale�y na to\n"
-"pozwoli�. Jak jest w tym przypadku?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Czy Tw�j komputer synchronizuje czas z innego komputera?\n"
-"Najcz�ciej jest to wykorzystywane w du�ych i �rednich\n"
-"organizacjach do synchronizacji czasu dla logowania.\n"
-"Je�li nie s�ysza�e� o tym, prawdopodobnie nie potrzebujesz\n"
-"tej us�ugi."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Zako�czono konfiguracj�. czy zapisa� zamiany na dysk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Nie mo�na otworzy� %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "B��d otwarcia %s do zapisu: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Kreator konfiguracji zapory sieciowej"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Prosz� czeka�, trwa przygotowywanie instalacji"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "WWW,/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Komputer sieciowy (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Serwery NFS, SMB, SSH, oraz Proxy"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Biuro"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Stacja robocza z Gnome"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Narz�dzia do Palm Pilota lub Visior"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Stacja robocza"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Zapora sieciowa/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Serwer systemu DNS"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programy biurowe: procesory tekstu (kword, abiword), arkusze kalkulacyjne "
-"(kspread, gnumeric), przegl�darki pdf, itp."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Dzwi�k: odtwarzacze mp3 i midi, miksery, itp."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Podr�czniki i HOWTO o Linuksie i wolnym oprogramowaniu"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Stacja robocza z KDE"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itp"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Zestawy narz�dzi dla poczty, WWW, transferu plik�w i chat"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Bazy danych"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Serwery baz danych PostgreSQL lub  MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Narz�dzia u�atwiaj�ce konfiguracj� komputera"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - D�wi�k"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Narz�dzia"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacja"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Narz�dzia dla konsoli"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Serwer pocztowy Postfix, serwer grup dyskusyjnych Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Korzystanie z Internetu"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Korzystanie z multimedi�w"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Konfiguracja sieci lokalnej"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Wi�cej pulpit�w graficznych (Gnome, IceWM)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"KDE - podstawowe �rodowisko graficzne wraz z zestawem towarzysz�cych narz�dzi"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "�rodowisko graficzne"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache oraz Pro-ftpd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Narz�dzia do tworzenia i nagrywania CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Komputer biurowy"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Serwer"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itp."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programy graficzne, np. Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Biblioteki do programowania w C i C++ , programy i pliki nag��wkowe"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Serwer sieciowy"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Pocza/Narz�dzia pracy grupowej/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Komputer do gier"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Odtwarzacze i edytory video"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafika"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programy rozrywkowe: zr�czno�ciowe, planszowe, strategiczne, itp."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Zestaw narz�dzi do czytania i wysy�ania poczty i grup dyskusyjnych (pin, "
-"mutt, tin) oraz przegl�dania sieci Web"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archiwizacja, emulatory, monitorowanie"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanse osobiste"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"�rodowisko graficzne z przyjaznymi dla u�ytkownika zestawami aplikacji i "
-"narz�dzi"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Programy klient�w dla r�nych protoko��w, w tym ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Bramka do Internetu"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programy do odtwarzania/edycji d�wi�ku i video"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Inne pulpity graficzne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "editory, pow�oki, narz�dzia plikowe, terminale"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programy do zarz�dzania finansami, np gnucash"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Zarz�dzanie osobistymi informacjami"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - Nagrywanie p�yt CD"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Stacja robocza dla naukowca"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Przerwij"
-
-#, fuzzy
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "�aden"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Wybierz domy�lnego u�ytkownika:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Drukarka sieciowa"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Mo�esz teraz okre�li� parametry modu�u %s."
-
-#~ msgid "Low"
-#~ msgstr "Niski"
-
-#~ msgid "Medium"
-#~ msgstr "�redni"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Par� ulepsze� dla tego poziomu zabezpiecze�: wi�cej komunikat�w i test�w."
-
-#~ msgid "mount failed"
-#~ msgstr "nieudane montowanie"
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Multimedia"
-
-#~ msgid "Boot mode"
-#~ msgstr "Tryb uruchamiania"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Dla eksperta"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux korzysta z czasu GMT \"Czas uniwersalny Greenwich\", t�umacz�c "
-#~ "go\n"
-#~ "na czas lokalny odpowiednio do wybranej strefy czasowej."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Po��cz z Internetem"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Roz��cz po��czenie z Internetem"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Konfiguracja po��czenia z sieci� (LAN lub Internet)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Na kt�ry dysk chcesz przenie�� ?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Wybierz pakiety do zainstalowania."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Informacje"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Stacja robocza z Gnome"
-
-#, fuzzy
-#~ msgid "user"
-#~ msgstr "U�ytkownik:"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Wybierz typ myszy."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Zako�cz"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Automatyczne montowanie wyjmowanych dysk�w"
-
-#~ msgid "Active"
-#~ msgstr "Uaktywnij"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Nie"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Wykryto drukark� model \"%s\" na"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Port lokalnej drukarki"
-
-#~ msgid "Printer Device"
-#~ msgstr "Port drukarki:"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "Brak nazwy urz�dzenia/pliku!"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Zdalny serwer CUPS"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Zdalny serwer CUPS"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Tryb pracy systemu"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Inna"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Wybierz uk�ad klawiatury."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Prosz� klikn�� na partycji"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Rodzaj: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Uszkodzony plik archiwum"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Konfiguracja X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Port drukarki:"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Anuluj"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Ok"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Zamknij"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "toot"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Otwieranie po��czenia..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Zamykanie po��czenia..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "Po��czenie nie zosta�o zamkni�te.\n"
-#~ "Spr�buj zrobi� to r�cznie przez uruchomienie\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "jako root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "System jest teraz roz��czony."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Okre�l rozmiar przeznaczony na instalacj�"
-
-#~ msgid "Total size: "
-#~ msgstr "Ca�kowity rozmiar: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Prosz� czeka�, "
-
-#~ msgid "Total time "
-#~ msgstr "Ca�kowity czas "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Wykorzysta� istniej�c� konfiguracj� X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Do jakiego portu jest pod��czona drukarka?\n"
-#~ "(pami�taj, �e /dev/lp0 to odpowiednik LPT1:)\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Uwaga, karta sieciowa zosta�a ju� skonfigurowana. Zostanie "
-#~ "zrekonfigurowana."
-
-#~ msgid "New"
-#~ msgstr "Nowy"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Kolejka sieciowa"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Prosz� klikn�� na partycji"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Niejednoznaczny (%s), sprecyzuj\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr "? (domy�lnie %s)"
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Tw�j wyb�r? (domy�lnie %s, wpisz \"none\" dla �adnego) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "nie mo�na otworzy� do odczytu /etc/sysconfig/autologin: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Chcesz zrestartowa� sie�?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Zgadzasz si�?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Nale�y zrestartowa� interfejs:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Nale�y zrestartowa� urz�dzenie %s. Zgadzasz si�?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Standardowy wyb�r to \"/dev/hda\", czyli pierwszy  dysk twardy (primary\n"
-#~ " IDE) lub  \"/dev/sda\" pierwszy dysk SCSI (first SCSI disk)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Czas po��czenia:"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Wybierz domy�lnego u�ytkownika:"
-
-#~ msgid "Spooler: "
-#~ msgstr "System wydruku: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Sprawd� tutaj mysz"
-
-#~ msgid "Press next to continue."
-#~ msgstr "By kontynuowa�, naci�nij Dalej."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Wybierz w�a�ciwy j�zyk instalacji i u�ywania systemu."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "By kontynuowa� instalacj�, musisz zaakceptowa� warunki licencji.\n"
-#~ "\n"
-#~ "\n"
-#~ "Wybierz \"Zgadzam si�\", je�li zgadzasz si� z jej warunkami.\n"
-#~ "\n"
-#~ "\n"
-#~ "Wybierz \"Nie zgadzam si�\", je�li si� z nimi nie zgadzasz.\n"
-#~ "Instalacja zostanie zako�czona bez �adnych zmian w konfiguracji."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Wybierz odpowiedni j�zyk i uk�ad klawiatury z listy powy�ej"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Je�li chcesz, by po instalacji by�y dost�pne tak�e inne j�zyki\n"
-#~ "(poza wybranym na pocz�tku instalacji), wybierz je z listy powy�ej\n"
-#~ "Je�li chcesz wybra� wszystkie, wska� \"Wszystkie\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Wybierz:\n"
-#~ "\n"
-#~ "\n"
-#~ "  - U�ytkownika: Je�li jeste� obeznany z Linuxem, masz mo�liwo��\n"
-#~ "     okre�lenia zastosowania zainstalowanego systemu. Szczeg�y poni�ej\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ekspert: �wietnie znasz  GNU/Linux i chcesz zainstalowa� go\n"
-#~ "    w nietypowy, odpowiedni dla Ciebie spos�b . Podobnie jak w przypadku\n"
-#~ "    instalacji \"U�ytkownika\" masz mo�liwo�� okre�lenia zastosowania "
-#~ "systemu\n"
-#~ "    Ale bardzo, bardzo prosimy, NIE WYBIERAJ TEJ OPCJI, JE�LI NIE WIESZ "
-#~ "CO ROBISZ!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Teraz nale�y okre�li� spos�b wykorzystania komputera. \n"
-#~ "* Stacja robocza: To dokona�y wyb�r, je�li u�ywasz komputera do "
-#~ "codziennej pracy w biurze lub\n"
-#~ "  w domu.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Programowanie: wybierz t� opcj�, je�eli chcesz korzysta� z komputera do "
-#~ "tworzenia oprogramowania.\n"
-#~ "  Zostanie zainstalowane ca�e oprogramowanie umo�liwiaj�ce kompilacj� , "
-#~ "debugowanie program�w,\n"
-#~ "  oraz tworzenie pakiet�w oprogramowania.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Serwer: jest to w�a�ciwy wyb�r, je�li komputer ma byc serwerem. Mo�e to "
-#~ "by� serwer plik�w (NFS lub\n"
-#~ "  SMB ), serwer drukarek (uniksowy typu \"windowsowego\") serwer NIS, "
-#~ "serwer baz danych itp.\n"
-#~ "  Nie oczekuj zainstalowaniea �adnych wodotrysk�w typu KDE lub GNOME."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Mo�esz teraz wybra� grupy pakiet�w, kt�re chcesz \n"
-#~ "zainstalowa� lub aktualizowa�\n"
-#~ "\n"
-#~ "\n"
-#~ "Instalator sprawdzi, czy masz na to do�� miejsca na dysku. Zostaniesz\n"
-#~ "ostrze�ony, je�li jest go zbyt ma�o. Je�li postanowisz mimo to "
-#~ "kontynuowa�,\n"
-#~ "cz�� mniej wa�nych pakiet�w nie zostanie zainstalowana.\n"
-#~ "Na dole listy znajdziesz opcj� \"Samodzielny wyb�r pakiet�w\"; \n"
-#~ "B�dziesz musia� jednak wybiera� spo�r�d ponad1000 pakiet�w ..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Mo�na teraz indywidualnie wybiera� pakiety do zainstalowania.\n"
-#~ "\n"
-#~ "\n"
-#~ "Klikni�cie w lewym rogu okna pakiet�w zwija lub rozwija list� pakiet�w\n"
-#~ "\n"
-#~ "\n"
-#~ "Klikni�cie na \"Prze��cz mi�dzy p�askim i grupowym sortowaniem\"\n"
-#~ "umo�liwia zobaczenie pakiet�w posortowanych alfabetycznie\n"
-#~ "\n"
-#~ "\n"
-#~ "Je��i nie chcesz by� informowany o zale�no�ciach miedzy pakietami,\n"
-#~ "kliknij na \"Automatyczne sprawdzanie zale�no�ci\". Po w��czeniu tej "
-#~ "opcji\n"
-#~ "odznaczenie pakietu spowoduje automatyczne od innych pakiet�w,\n"
-#~ "kt�re wymagaj� go do dzia�ania."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Je�li masz wszystkie instalacyjne p�yty CD z listy powy�ej, kliknij Ok.\n"
-#~ "Je�li nie masz �adnej z tych p�yt, kliknij Anuluj.\n"
-#~ "Je�li masz niekt�re z p�yt, odznacz te, kt�rych nie masz i kliknij Ok."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Nale�y teraz przetestowa� dzia�anie myszy. U�yj przycisk�w oraz k�ka\n"
-#~ "by sprawdzi�, czy ustawienia s� prawid�owe. Je�li nie, naci�nij \"Anuluj"
-#~ "\"\n"
-#~ "i wybierz inny sterownik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Je�li instalujesz na komputerze Apple z 1-przyciskow� mysz�, masz teraz\n"
-#~ "mo�liwo�� przypisania jaki� klawiszy klawiatury w celu emulacji 2 i 3 "
-#~ "przycisku\n"
-#~ "myszy. Pozwoli to na zapewnienie pe�nej funkcjonalno�ci myszy podczas "
-#~ "pracy\n"
-#~ "na konsoli oraz w �rodowisku graficznym. "
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Wybierz w�a�ciw� opcj�, by pod��czy� komputer do Internetu\n"
-#~ "lub sieci lokalnej. Pami�taj o w��czeniu urz�dze� zewn�trznych\n"
-#~ "przed wybraniem opcji, by instalator m�g� je automatycznie wykry�.\n"
-#~ "\n"
-#~ "\n"
-#~ "Je�li nie u�ywasz sieci lokalnej ani Internetu, wybierz\n"
-#~ "\"Wy��czenie sieci\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Je�li chcesz skonfigurowa� sie� po instalacji, lub zako�czy�e�\n"
-#~ "konfigurowanie sieci, wybierz \"Zrobione\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Nie wykryto modemu. Prosz� okre�li� port szeregowy, do kt�rego jest on "
-#~ "pod��czony.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dla informacji: pierwszy port szeregowy (COM1 w Windows)\n"
-#~ "w GNU/Linux nazywa si� \"ttyS0\". "
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Nale�y teraz poda� opcje po��czenia modemowego. Je�li nie wiesz,\n"
-#~ "lub nie wiesz co wpisa�, poprawne informacje otrzymasz od\n"
-#~ "Twojego dostawcy Internetu (ISP). Je�li nie wpiszesz adres�w DNS, zostan� "
-#~ "one pobrane od ISP\n"
-#~ "w trakcie po��czenia."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Je�li posiadasz zewn�trzny modem, w��cz go, by instalator m�g� go "
-#~ "automatycznie wykry�."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "W��cz modem i wybierz w�asciwy model."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Je�li nie jeste� pewien, �e powy�sze informacje s� prawid�owe, lub\n"
-#~ "lub nie wiesz co wpisa�, poprawne informacje otrzymasz od\n"
-#~ "Twojego dostawcy Internetu (ISP). Je�li nie wpiszesz adres�w DNS, zostan� "
-#~ "one pobrane od ISP\n"
-#~ "w trakcie po��czenia."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Mo�esz teraz, poda� nazw� hosta (je�li trzeba).\n"
-#~ "Je�li nie jeste� pewien, co wpisa�, nale�y uzyska� informacje od\n"
-#~ "Twojego dostawcy Internetu (ISP)."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Nale�y teraz skonfigurowa� kart� sieciow�\n"
-#~ "\n"
-#~ "   * adres IP, je�eli go nie znasz, spytaj administratora sieci\n"
-#~ "     Nie wpisuj adresu IP, je�li wybra�e� \"Automatyczne IP\".\n"
-#~ "\n"
-#~ "   * mask� sieci, \"255.255.255.0\" na og� dzia�a. \n"
-#~ "      Je�eli  nie jeste� pewien, spytaj administratora sieci.\n"
-#~ "\n"
-#~ "    * Automatyczne IP: Je�eli Twoja sie� u�ywa protoko�u DHCP lub BOOTP,\n"
-#~ "      wybierz t� opcj�. Je�eli nie jeste� pewien, spytaj administratora "
-#~ "sieci.\n"
-#~ "      W przypadku wybranie tej opcji nie nale�y wpisywa� adresu IP"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Mo�esz teraz, poda� nazw� hosta (je�li trzeba).\n"
-#~ "Je�li nie jeste� pewien, co wpisa�, nale�y uzyska� informacje od "
-#~ "administratora sieci."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Mo�esz teraz, poda� nazw� hosta (je�li trzeba).\n"
-#~ "Je�li nie jeste� pewien, co wpisa�, pozostaw to pole puste."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Mo�esz teraz poda� opcje po��czenia modemowego. Je�eli ich nie znasz, \n"
-#~ "skontaktuj si� z dostawc� Internetu (ISP)."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Je�li b�dziesz korzysta� z serwer�w po�rednicz�cych, skonfiguruj je "
-#~ "teraz.\n"
-#~ "Je�eli nie jeste� pewien, spytaj administratora sieci lub dostawcy "
-#~ "Internetu."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Mo�esz u�y� pakiet�w kryptograficznych, je�eli Twoje po��czenie \n"
-#~ "z Internetem zosta�o odpowiednio skonfigurowane. Zacznij od wyboru "
-#~ "mirrora\n"
-#~ "(miejsca, sk�d b�dziesz �ci�ga� pakiety) i wybierz pakiety do instalacji\n"
-#~ "\n"
-#~ "\n"
-#~ "Pami�taj, �e wyb�r mirrora i pakiet�w musi by� zgodny z polskim prawem."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Nale�y teraz okre�li� stref� czasow� miejsca, w kt�rym mieszkasz."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Mo�esz skonfigurowa� drukark� lokaln� (pod��czon� bezpo�rednio do\n"
-#~ "Twojego komputera), lub sieciow� (dost�pn� poprzez sie� Unix, Netware\n"
-#~ "lub Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Je�li chcesz mie� mo�liwo�� drukowania, wybierz system wydruku\n"
-#~ "(dost�pne s� CUPS i LPR)\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS to nowy, silny i elastyczny system wydruku dla system�w Unixowych\n"
-#~ "(CUPS oznacza \"Common Unix Printing System\"). Jest to domy�lny system\n"
-#~ "wydruku w Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR to stary system wydruku u�ywany w poprzednich\n"
-#~ "wersjach Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "Je�li nie u�ywasz drukarki, wybierz \"Brak\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux obs�uguje wiele rodzaj�w drukarek. Ka�da z nich wymaga\n"
-#~ "oddzielnej konfiguracji.\n"
-#~ "\n"
-#~ "\n"
-#~ "Je�li drukarka jest fizycznie pod��czona do Twojego komputera, wybierz\n"
-#~ "\"Drukarka lokalna\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Je�li chcesz uzyska� dost�p do drukarki na innym komputerze z Unixem,\n"
-#~ "wybierz \"Drukarka sieciowa\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Je�li chcesz uzyska� dost�p do drukarki za�o�onej na innym komputerze\n"
-#~ "z Microsoft Windows (lub Unixie z Samb�), wybierz \"SMB/Windows 95/98/NT"
-#~ "\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Nale�y teraz w��czy� drukark�, by umo�liwi� instalatorowi jej wykrycie.\n"
-#~ "\n"
-#~ "Konieczne jest te� podanie kilku informacji.\n"
-#~ "\n"
-#~ "\n"
-#~ "...*.Nazwa drukarki: system wydruku wykorzystuje  \"lp\" jako domy�ln� "
-#~ "drukark�, powiniene� posiada� drukark�\n"
-#~ "     o takiej nazwie. Jedna drukarka mo�e mie� wiele nazw, oddzielonych "
-#~ "znakiem '\"'\".\n"
-#~ "     Je�li wi�c lubisz przyjazne nazwy, mo�esz z nich korzysta�:np. "
-#~ "\"Moja drukarka|lp\".\n"
-#~ "    Drukarka, kt�rej jedn� z nazw jest \"lp\" b�dzie drukark� domy�ln�\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Opis drukarki jest opcjonalny, lecz u�yteczny je�li posiadasz wi�cej "
-#~ "drukarek, lub te� udost�pniasz je innym\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Lokalizacja. Je�li chcesz poda� informacje o po�o�eniu drukarki,\n"
-#~ "     wpisz je tutaj (mo�esz wpisa� cokolwiek, np. \"Drugie pi�tro\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Nale�y wpisa� tutaj kilka informacji.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nazwa kolejki: system wydruku wykorzystuje  \"lp\" jako domy�ln� "
-#~ "drukark�, powiniene� posiada� drukark�\n"
-#~ "     o takiej nazwie. Jedna drukarka mo�e mie� wiele nazw, oddzielonych "
-#~ "znakiem '\"'\".\n"
-#~ "     Je�li wi�c lubisz przyjazne nazwy, mo�esz z nich korzysta�:np. "
-#~ "\"Moja drukarka|lp\".\n"
-#~ "    Drukarka, kt�rej jedn� z nazw jest \"lp\" b�dzie drukarka domy�ln�\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Katalog bufora: jest to katalog, gdzie s� zapisywane drukowane "
-#~ "zadania. Nie zmieniaj domy�lnego wpisu,\n"
-#~ "     je�li nie wiesz, co wpisa�\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Pod��czenie drukarki. Je�li drukarka jest fizycznie pod��czona do "
-#~ "Twojego komputera, wybierz\n"
-#~ "     \"Drukarka lokalna\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Je�li chcesz uzyska� dost�p do drukarki na innym komputerze z "
-#~ "Unixem,\n"
-#~ "     wybierz \"Drukarka sieciowa lpd\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Je�li chcesz uzyska� dost�p do drukarki za�o�onej na innym "
-#~ "komputerze z Microsoft Windows\n"
-#~ "      (lub Unixie z Samb�), wybierz \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "     Je�li chcesz uzyska� dost�p do drukarki w sieci Netware, wybierz "
-#~ "\"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Nie wykryto drukarki. Podaj nazw� portu, do kt�rego jest pod��czona\n"
-#~ "\n"
-#~ "\n"
-#~ "Dla informacji: wi�kszo�� drukarek pod��cza si� do pierwszego portu "
-#~ "r�wnoleg�ego\n"
-#~ "Nazywa si� on w GNU/Linuksie \"/dev/lp0\", natomiast w Windows\"LPT1\""
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Wybierz drukark� z listy powy�ej."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Wybierz w�a�ciwe dla swojej drukarki opcje.\n"
-#~ "Je�li nie wiesz, co zaznaczy�, zapoznaj si� z dokumentacj� drukarki\n"
-#~ "\n"
-#~ "\n"
-#~ "W nast�pnym kroku b�dzie mo�liwe sprawdzenie wybranej konfiguracji oraz "
-#~ "jej modyfikacja, je�li wydruki nie b�d� zgodne z oczekiwaniami."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Teraz nale�y wpisa� has�o roota Twojego Mandrake Linux.\n"
-#~ "Has�o nale�y wpisa� dwa razy w celu weryfikacji poprawno�ci\n"
-#~ "\n"
-#~ "\n"
-#~ "Root to administrator systemu, jedyny u�ytkownik maj�cy prawo\n"
-#~ "modyfikacji konfiguracji systemu.Zwr�� wi�c szczeg�ln� uwag� na\n"
-#~ "jego has�o! Nieautoryzowane u�ycie konta roota mo�e by� skrajnie\n"
-#~ "niebezpieczne dla integralno�ci systemu i danych oraz innych system�w,\n"
-#~ "pod��czonych do niego.\n"
-#~ "\n"
-#~ "\n"
-#~ "Has�o powinno by� mieszank� znak�w alfanumerycznych\n"
-#~ "o d�ugo�ci co najmniej 8 znak�w. *Nigdy* nie powinno by�\n"
-#~ "zapisywane.\n"
-#~ "\n"
-#~ "Nie wymy�laj jednak has�a zbyt d�ugiego lub nazbyt\n"
-#~ "skomplikowanego: musisz go zapami�ta� bez k�opotu."
-
-#~ msgid ""
-#~ "If your network uses the LDAP (or NIS) protocol for authentication, "
-#~ "select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Je�li w sieci do autentykacji stosowany jest protok� LDAP (lub NIS), "
-#~ "wybierz\n"
-#~ "\"LDAP\" (lub \"NIS\") jako spos�b autentykacji. Je�li nie wiesz, spytaj\n"
-#~ "administratora sieci\n"
-#~ "\n"
-#~ "Jesli komputer nie jset pod��czony do administrowanej sieci, wskazanejest "
-#~ "wybranie \"Pliki lokalne\" jak sposobu autentykacji."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Powiniene� utworzy� jedno lub wi�cej kont \"zwyk�ych\" u�ytkownik�w\n"
-#~ "b�d�cych przeciwie�stwem konta \"uprzywilejowanego\" u�ytkownika\n"
-#~ "- roota. Mo�esz utworzy� jedno lub wi�cej kont dla ka�dej osoby, kt�rej\n"
-#~ "chcesz umo�liwi� korzystanie z komputera. Pami�taj, �e ka�de konto ma\n"
-#~ "indywidualne ustawienia (�rodowisko graficzne, ustawienia program�w,"
-#~ "itp.)\n"
-#~ "oraz w�asny \"katalog domowy\", w kt�rych te ustawienia s� zapisywane.\n"
-#~ "\n"
-#~ "\n"
-#~ "Przede wszystkim, utw�rz konto dla samego siebie!. Nawet je�li jeste�\n"
-#~ "jedynym u�ytkownikiem komputera, NIE KORZYSTAJ z konta roota do\n"
-#~ "codziennej pracy: jest to bardzo ryzykowne. Cz�sto zdarza si� \n"
-#~ "zniszczenie systemu przez zwyk�� liter�wk�\n"
-#~ "\n"
-#~ "\n"
-#~ "Powiniene� wi�c do normalnej pracy w systemie korzysta� z konta\n"
-#~ "zwyk�ego u�ytkownika, natomiast konto roota wykorzystywa� tylko\n"
-#~ "do administracji oraz konfiguracji systemu."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Utworzenie dysku startowego jest bardzo zalecane. Je�li nie b�dzie\n"
-#~ "mo�na uruchomi� komputera, b�dzie to jedyny prosty spos�b\n"
-#~ "przywr�cenia dzia�ania systemu bez reinstalacji."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ " G��wne opcje LILO i Grub to:\n"
-#~ "  - urz�dzenie startowe:  urz�dzenie, kt�re zawiera sektor �aduj�cy\n"
-#~ "zwykle jest to \"/dev/hda\". Wybierz tak, je�eli nie masz pewno�ci.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Czas op�nienia uruchamiania domy�lnego systemu:\n"
-#~ "okre�la, ile czasu masz do rozpocz�cia uruchamiania domy�lnego systemu.\n"
-#~ "Przydatne bywa w systemach, kt�re s� tak skonfigurowane, �e\n"
-#~ "uruchamianie nast�puje z twardego dysku, natychmiast po uaktywnieniu\n"
-#~ "klawiatury. Program �aduj�cy nie czeka, je�eli op�nienie jest r�wne "
-#~ "zero,\n"
-#~ "lub pominiesz t� opcj�,\n"
-#~ " \n"
-#~ "\n"
-#~ "  - Tryb graficzny: okre�la tryb tekstowy VGA, kt�ry powinien by� "
-#~ "wybrany\n"
-#~ "podczas �adowania. Opcje to:\n"
-#~ "\n"
-#~ "    * normal: wybierz tryb 80x25.\n"
-#~ "\n"
-#~ "    * <numer>: wybierz tryb o danym numerze.  \n"
-#~ "\n"
-#~ "  - Wyczy�� \"/tmp\" po ka�dym prze�adowaniu: je�li chcesz skasowa�\n"
-#~ " wszystkie pliki i katalogi znajduj�ce si� w \"/tmp\" po prze�adowaniu, "
-#~ "zaznacz t� opcj�.  - Okre�l rozmiar pami�ci, je�li trzeba; nie istnieje "
-#~ "niestety standardowa metoda\n"
-#~ "sprawdzania w BIOS-ie ilo�ci pami�ci. W konsekwencji Linux mo�e "
-#~ "nieprawd�owo\n"
-#~ "wykry� wielko�� pami�ci RAM w twoim komputerze. Nale�y pami�ta�, �e "
-#~ "r�nica\n"
-#~ "2 do 4 MB mi�dzy rozmiarem pami�ci wykrytym, a rzeczywistym jest normalna."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO to program rozruchowy dla SPARC: pozwala on uruchomi�\n"
-#~ "GNU/Linux lub inny system operacyjny, zainstalowany na twoim komputerze.\n"
-#~ "Normalnie inne systemy s� wykrywane i instalowane. Je�eli tak nie jest,\n"
-#~ "powiniene� \"r�cznie\" wprowadzi� odpowiednie dane. B�d� ostro�ny\n"
-#~ "i wybierz w�a�ciwe parametry.\n"
-#~ "\n"
-#~ " \n"
-#~ "Mo�esz oczywi�cie r�wnie� uniemo�liwi� dost�p do nich przy starcie "
-#~ "przez \n"
-#~ "usuni�cie ich z listy. W tej sytuacji musisz jednak posiada� dyskietki "
-#~ "startowe\n"
-#~ "by je uruchomi�."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "G��wne opcje SILO to:\n"
-#~ "  - urz�dzenie startowe:  urz�dzenie, kt�re zawiera sektor �aduj�cy\n"
-#~ "     Je�li nie wiesz dok�adnie, co chcesz zrobi�, wybierz     \"Pierwszy "
-#~ "sektor     dysku (MBR)\"\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Czas op�nienia uruchamiania domy�lnego systemu:\n"
-#~ "    okre�la, ile czasu masz do rozpocz�cia uruchamiania domy�lnego "
-#~ "systemu.\n"
-#~ "    To przydaje si� w systemach, kt�re s� tak skonfigurowane, �e     "
-#~ "uruchamianie nast�puje z twardego dysku, natychmiast po w�aczeniu   "
-#~ "klawiatury. Program �aduj�cy nie czeka, je�eli op�nienie jest r�wne "
-#~ "zero,\n"
-#~ "    lub pominiesz t� opcj�."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Przyszed� czas na konfiguracj� systemu X Window, kt�ry jest rdzeniem\n"
-#~ "GUI (graficznego interfejsu u�ytkownika) GNU/Linuxa. W tym celu trzeba\n"
-#~ "skonfigurowa� kart� graficzn� oraz monitor. Wi�kszo�� krok�w jest\n"
-#~ "zautomatyzowana, tak wi�c Twoje zadanie polega na weryfikacji tego,\n"
-#~ "co zosta�o zrobione oraz akceptowaniu ustawie� :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kiedy konfiguracja zostanie zako�czona, X-y zostan� uruchomione\n"
-#~ "(o ile tego chcesz), by� mo�na by�o sprawdzi�, czy ustawienia s� "
-#~ "odpowiednie\n"
-#~ "Je�li nie s� w�a�ciwe, mo�esz si� cofn�� i zmieni� je, tak wiele\n"
-#~ "razy jak jest to potrzebne."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Je�eli z konfiguracj� X-�w jest co� nie tak, u�yj tych opcji,\n"
-#~ "w celu poprawnego skonfigurowania X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Je�eli chcesz u�ywa� graficznego trybu przy logowaniu si� w systemie \n"
-#~ "wybierz \"Tak\". W przeciwnym wypadku wybierz \"Nie\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Mo�esz okre�li� poziom bezpiecze�stwa systemu. Szczeg�owe informacje na "
-#~ "ten temat znajduj� si� w podr�czniku.\n"
-#~ "Je�li nie wiesz co wybra�, zachowaj domy�lne ustawienia.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Teraz nast�pi ponowne uruchomienie systemu.\n"
-#~ "\n"
-#~ "Tw�j nowy Mandrake Linux zostanie za�adowany automatycznie.\n"
-#~ "Je�eli chcia�by� za�adowa� inny z posiadanych system�w operacyjnych,\n"
-#~ "przeczytaj dodatkowe instrukcje."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "czeski (programisty)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "s�owacki (programisty)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Nazwa tworzonego profilu:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Zapisz /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Sformatuj wszystko"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Po sformatowaniu wszystkich partycji,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "wszystkie dane znajduj�ce si� na nich zostan� utracone"
-
-#~ msgid "Reload"
-#~ msgstr "Prze�aduj"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Czy utworzy� dyskietk� instalacji automatycznej w celu powielenia "
-#~ "instalacji?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Konfiguracja ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Korzystaj�c z sieciowego serwera CUPS nie musisz tutaj\n"
-#~ "konfigurowa� �adnych drukarek; zostan� one automatycznie\n"
-#~ "wykryte, chyba �e znajduje si� on w innej sieci, w tym przypadku\n"
-#~ "nale�y poda� adres serwera CUPS oraz opcjonalnie numer portu."
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "Podaj nazw� drukarki i komentarz"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr " Kolejka sieciowa"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "Tutaj mo�na poda� dowolne polecenie, kt�re zostanie wykonane w "
-#~ "potokuzamiast bezpo�redniego wys�ania wydruku do drukarki"
-
-#~ msgid "Command line"
-#~ msgstr "Polecenie"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Nale�y wpisa� polecenie!"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Monitorowanie sieci"
-
-#~ msgid "Profile "
-#~ msgstr "Profil "
-
-#~ msgid "Statistics"
-#~ msgstr "Statystyki"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Szybko�� wysy�ania: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Szybko�� odbierania: "
-
-#~ msgid "Connection Time: "
-#~ msgstr "Czas po��czenia:"
-
-#~ msgid "Logs"
-#~ msgstr "Logi"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Po��czenie z Internetem"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Roz��cz po��czenie z Internetem"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Roz��czenie po��czenia powiod�o si�."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Roz��czono."
-
-#~ msgid "Connection complete."
-#~ msgstr "Po��czono."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Po��czenie nie powiod�o si�. Sprawd� konfiguracj� w w Centrum Sterownia "
-#~ "Mandrake."
-
-#~ msgid "sent: "
-#~ msgstr "wys�ano: "
-
-#~ msgid "received: "
-#~ msgstr "odebrano: "
-
-#~ msgid "average"
-#~ msgstr "�rednio"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Domy�lny tryb uruchamiania"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Zawarto�� pliku konfiguracyjnego nie mo�e zosta� zinterpretowana."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Niepoprawny plik konfiguracyjny"
-
-#~ msgid "Adapter"
-#~ msgstr "Karta"
-
-#~ msgid "Disable network"
-#~ msgstr "Wy��czenie sieci"
-
-#~ msgid "Enable network"
-#~ msgstr "W��czenie sieci"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Mo�na teraz przetestowa� mysz. U�yj przycisk�w i k�ka by sprawdzi�,\n"
-#~ "czy ustawienia s� w�a�ciwe. Je�li nie, wybierz \"Anuluj\" by wybra� inny\n"
-#~ "sterownik."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Po��czenie DSL (lub ADSL)"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Zamknij"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Mo�na bezpo�rednio poda� URI okre�laj�ce dost�p do drukarki w CUPS"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Tak, wydrukuj stron� testow� ascii"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Tak, wydrukuj graficzn� stron� testow�"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "Tak, wydrukuj obie strony testowe"
-
-#~ msgid "Paper Size"
-#~ msgstr "Rozmiar papieru"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Wysun�� stron� po wydruku?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opcje sterownika uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opcje g��bi kolor�w"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Drukowa� tekst jako PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Usun�� efekt schodk�w?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Ilo�� stron na stronie wydruku"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Lewy/Prawy margines w punktach (1/72 cala) "
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "G�rny/Dolny margines w punktach (1/72 cala)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Dodatkowe opcje GhostScriptu"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Dodatkowe opcje dla tekstu"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Odwrotna kolejno�� stron"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Wybierz spos�b pod��czenia drukarki sieciowej"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "Przy korzystaniu z sieciowego serwera CUPS, drukarki\n"
-#~ "zostan� automatycznie wykryte, nie ma potrzeby ich konfiguracji.\n"
-#~ "W przypadku w�tpliwo�ci, wybierz \"Sieciowy serwer CUPS\"."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Ka�da drukarka wymaga nazwania (na przyk�ad lp)\n"
-#~ "Mo�na te� zdefiniowa� inne parametry jak opis drukarki lub jej "
-#~ "lokalizacj�\n"
-#~ "Jak� nazw� u�y� dla tej drukarki oraz w jaki spos�b jest ona pod��czona?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Ka�da kolejka drukarki (drukuje zadanie skierowane do niej)\n"
-#~ "wymaga nazwania (cz�sto lp) oraz przypisania katalogu na bufor.\n"
-#~ "Jak nazwa� katalog przypisany do kolejki oraz jak drukarka jest "
-#~ "pod��czona?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nazwa kolejki:"
-
-#~ msgid "Spool directory"
-#~ msgstr "Katalog bufora:"
-
-#~ msgid "Disable"
-#~ msgstr "Wy��czy�"
-
-#~ msgid "Enable"
-#~ msgstr "W��czy�"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "By zwi�kszy� poziom bezpiecze�stwa systemu nale�y w��czy�:\n"
-#~ "\"U�yj pliku shadow\" i \"U�yj d�ugich hase� MD5\" "
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Je�eli Twoja sie� u�ywa NIS (systemu informacji sieciowej),\n"
-#~ "wybierz \"U�yj NIS\". \n"
-#~ "Je�eli nie jeste� pewien, spytaj administratora sieci."
-
-#~ msgid "yellow pages"
-#~ msgstr "��te strony"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Konfiguracja sieci lokalnej"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 dostawcy"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 dostawcy"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Jak chcesz ��czy� si� Internetem?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "cannot fork: "
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Rozmiar wybranych %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Otwieranie po��czenia..."
-
-#~ msgid "Configure..."
-#~ msgstr "Konfiguruj..."
-
-#~ msgid "Standard tools"
-#~ msgstr "Narz�dzia standardowe"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Ten skrypt startowy �aduje modu� obs�uguj�cy mysz usb."
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Konfiguracja sposobu uruchamiania"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Po��czenie z Internetem jest skonfigurowane.\n"
-#~ "Mo�na skonfigurowa� komputer jako wsp�dziel�cy po��czenie z Internetem\n"
-#~ "Ta us�uga pozwala innym komputerom w sieci lokalnej na u�ywanie "
-#~ "po��czenia\n"
-#~ "tego komputera z Internetem.\n"
-#~ "\n"
-#~ "Uwaga:  wymagana jest dedykowana karta sieciowa w��czaj�ca komputer w "
-#~ "sie� lokaln� (LAN)\n"
-#~ "Czy chcesz konfigurowa� wsp�dzielenie po��czenia z Internetem?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Automatyczne sprawdzanie zale�no�ci"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Konfiguracja LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Utw�rz dysk startowy"
-
-#~ msgid "Choice"
-#~ msgstr "Wyb�r"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Teraz mo�esz wybra� r�ne dodatkowe opcje dla Twojego systemu.\n"
-#~ "\n"
-#~ "* U�ywa� optymalizacji dysku: ta opcja mo�e zwi�kszy� szybko�� twardego\n"
-#~ "dysku, ale jest opcj� tylko dla zaawansowanych u�ytkownik�w: \n"
-#~ "niekt�re kiepskie chipsety mog� zniszczy� Twoje dane, b�d� wi�c czujny!\n"
-#~ "Kernel ma wprawdzie wbudowan� czarn� list� chipset�w, ale je�li chcesz \n"
-#~ "unikn�� przykrej niespodzianki, lepiej nie wybiera� tej opcji.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Wybierz poziom bezpiecze�stwa: mo�esz wybra� poziom bezpiecze�stwa \n"
-#~ "dla twojego systemu. Zajrzyj do podr�cznika po szczeg�ow� informacj�,\n"
-#~ "lub po prostu,je�li nie wiesz, co zrobi� , wybierz \"�redni\" ; \n"
-#~ "\n"
-#~ "\n"
-#~ "* Sprecyzuj rozmiar pami�ci, je�eli trzeba: niestety w dzisiejszym "
-#~ "�wiecie\n"
-#~ "pecet�w nie ma standardowej metody zapytania BIOS-u o wielko�� pami�ci.\n"
-#~ "Tak wi�c GNU/Linux mo�e wykry� nieprawid�owo Twoj� pami��. \n"
-#~ "W tym wypadku podaj prawid�ow� wielko��\n"
-#~ "Uwaga: r�nica o 2 lub 4 MB jest normalna.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Automatyczne montowanie wyjmowanych dysk�w: Je�eli nie chcesz\n"
-#~ "\"r�cznie\" montowa� medi�w typu CD, stacja dyskietek, Zip,\n"
-#~ "zaznacz t� opcj�\n"
-#~ "\n"
-#~ "\n"
-#~ "* Wyczy�� /tmp przy ka�dym starcie systemu: zaznacz t� opcj�, je�li\n"
-#~ "je�li chcesz kasowa� wszystkie pliki i katalogi zapiasane w /tmp przy \n"
-#~ "starcie systemu,\n"
-#~ "\n"
-#~ "\n"
-#~ " - W��cz NumLock przy starcie: zaznacz t� opcj�, je�li chcesz uaktywni�\n"
-#~ " klawiatur� numeryczn� po stacie Uwaga : W X-ach klawisz NumLock mo�e "
-#~ "dzia�a� lub nie, nie uaktywniaj te�\n"
-#~ "tej opcji w przypadku laptop�w."
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Dost�p do Internetu/sieci lokalnej"
-
-#~ msgid "Mail information"
-#~ msgstr "Informacje o poczcie"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "R�ne"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "R�ne pytania"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr ""
-#~ "Nie mo�na u�ywa� supermount\n"
-#~ "przy ustawionym wysokim poziomie bezpiecze�stwa"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Ostrze�enie: PRZY TYM POZIOMIE BEZPIECZE�STWA NIE JEST MO�LIWE\n"
-#~ "BEZPO�REDNIE REJESTROWANIE SI� Z KONSOLI NA ROOTA! \n"
-#~ "Nale�y zarejestrowa� si� jako zwyk�y u�ytkownik, nast�pnie u�y� \"su\".\n"
-#~ "W og�lno�ci: komputer w tej konfiguracji nadaje si� wy��cznie na serwer.\n"
-#~ "Zosta�e� ostrze�ony."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "B�d� ostro�ny, uaktywnienie numlock mo�e powodowa�\n"
-#~ "problemy z wypisywaniem cyfr zamiast liter (np. naci�ni�cie \"p\" daje \"6"
-#~ "\")"
-
-#~ msgid "Actions"
-#~ msgstr "Czynno�ci"
-
-# ../../share/compssUsers
-#~ msgid "Scientific applications"
-#~ msgstr "Programy naukowe"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Pierwszy serwer DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Drugi serwer DNS"
-
-#~ msgid "using module"
-#~ msgstr "u�ycie modu�u"
-
-#~ msgid "Development, Database"
-#~ msgstr "Programowanie, bazy danych"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Programowanie, narz�dzia standardowe"
-
-#~ msgid "loopback"
-#~ msgstr "plikopartycja"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Kt�rego programu rozruchowego chcesz u�y�?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Dyskietka automatycznej instalacji"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Spr�bowa� wykry� modem?"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Wy��czenie po��czenia z Internetem"
-
-#~ msgid "Configure local network"
-#~ msgstr "Konfiguracja sieci lokalnej"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Konfiguracja po��czenia z Internetem / Konfiguracja sieci lokalnej"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Sie� lokalna zosta�a ju� skonfigurowana.\n"
-#~ "Czy chcesz:"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Skonfiguruj ponownie korzystaj�c z kreatora..."
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Obr�bka grafiki"
-
-#~ msgid "Sciences"
-#~ msgstr "Nauki"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Rozmowy chat: (IRC lub natychamiastowa komunikacja) programy jak xchat, "
-#~ "licq, gaim, oraz narz�dzia transferu plik�w"
-
-#~ msgid "Communication facilities"
-#~ msgstr "U�atwienia komunikacyjne"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Narz�dzia internetowe"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Bazy danych (mysql i postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Programowanie C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Konfiguracja strefy czasowej"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Karta sieciowa 1 (eth0):"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(mo�e by� przyczyn� zniszczenia danych)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Uaktywnienie num lock przy starcie"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Potwierd� has�o:"
-
-#~ msgid "default"
-#~ msgstr "domy�lne"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Jakie jest zastosowanie komputera?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Okre�l rozmiar przeznaczony na instalacj�"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "U�yj diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "U�ytkownika"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Jeste� pewien, �e jeste� ekspertem? \n"
-#~ "B�dziesz mia� du�e uprawnienia, co mo�e by� niebezpieczne.\n"
-#~ "\n"
-#~ "B�dziesz pytany np. o \"U�yj pliku shadow dla hase�?\n"
-#~ "Czy potrafisz odpowiedzie� na tego typu pytania?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "U�yj pliku shadow"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "U�yj hase� kodowanych MD5"
-
-#~ msgid "Search"
-#~ msgstr "Znajd�"
-
-#~ msgid "Package"
-#~ msgstr "Pakiet"
-
-#~ msgid "Tree"
-#~ msgstr "Drzewo"
-
-#~ msgid "Sort by"
-#~ msgstr "Sortowanie wg"
-
-#~ msgid "Category"
-#~ msgstr "Kategoria"
-
-#~ msgid "Installed packages"
-#~ msgstr "Zainstalowane pakiety"
-
-#~ msgid "Available packages"
-#~ msgstr "Dost�pne pakiety"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Poka� tylko pozosta�e"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Dodaj po�o�enie pakiet�w"
-
-#~ msgid "Update location"
-#~ msgstr "Po�o�enie uaktualnie�"
-
-#~ msgid "Remove"
-#~ msgstr "Usu�"
-
-#~ msgid "Find Package"
-#~ msgstr "Szukaj pakietu"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Znajd� pakiet zawieraj�cy plik"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Prze��cze mi�dzy zainstalowanymi i dost�pnymi"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Sprawdzanie zale�no�ci"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Zostan� odinstalowane nast�puj�ce pakiety"
-
-#~ msgid "Regexp"
-#~ msgstr "Wyra�enie regularne"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Jakiego pakietu szukasz?"
-
-#~ msgid "No match"
-#~ msgstr "Nic nie pasuje"
-
-#~ msgid "No more match"
-#~ msgstr "Nic wi�cej nie pasuje"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "Teraz rpmdrake zostanie ponownie uruchomiony,\n"
-#~ "aby umo�liwi� szukanie zbior�w."
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Kt�rego pliku szukasz?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Czego szukasz?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Podaj termin (n.p. ``extra'', ``commercial'')"
-
-#~ msgid "Directory"
-#~ msgstr "Katalog"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "CD niedost�pny ( nic w katalogu /mnt/cdrom )."
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL katalogu zawieraj�cego RPM-y."
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Dla po��czenia FTP lub HTTP musisz poda� po�o�enie pliku hdlist\n"
-#~ "wzgl�dem adresu powy�ej."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Wy�lij nast�puj�ce informacje"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s jest ju� u�ywane"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Aktualizacja bazy RPM-�w."
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Zostanie usuni�ta pozycja %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Znajdowanie pozosta�ych"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Znajdowanie pozosta�ych zajmie troch� czasu"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Wykryto kart� ISDN:\n"
-
-#~ msgid "Other countries"
-#~ msgstr "Inne kraje"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "W jakim kraju przebywasz?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Modem Alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "Modem ECI"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Je�li T�j modem to Alcatel, wybierz Alcatel, je�li nie, wybierz ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "nie u�ywaj pppoe"
-
-#~ msgid "i18n (important)"
-#~ msgstr "lokalizacja (wa�ny)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "lokalizacja (bardzo fajny)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (przydatny)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Do kt�rego portu szeregowego jest pod��czona mysz?"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, biblioteki, narz�dzia"
-
-#~ msgid "Czech"
-#~ msgstr "czeski"
-
-#~ msgid "Slovakian"
-#~ msgstr "s�owacki"
diff --git a/perl-install/share/po/pt.po b/perl-install/share/po/pt.po
deleted file mode 100644
index a0f710bb1..000000000
--- a/perl-install/share/po/pt.po
+++ /dev/null
@@ -1,11403 +0,0 @@
-# DRAKX PT .PO FILE.
-# Copyright (C) 1999 MandrakeSoft
-# Andrei <andreib@zaz.com.br>, 1999-2000
-# Paulo Cardoso <paulo@ejs.is>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-03-10 19:37GMT\n"
-"Last-Translator: Jorge Costa <jorgercosta@netc.pt>\n"
-"Language-Team: Portuguese <pt@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.2\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configurar todas as cabe�as independentemente"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Usar exten��o Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configurar placa �nica \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Configura��o Multi-Cabe�a"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"O seu sistema suporta configura��o multi-cabe�a.\n"
-"O que deseja afazer?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Placa Gr�fica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Seleccione uma placa gr�fica"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Escolha um servidor X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "servidor  X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Escolha um servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "servidor  X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Qual a configura��o do Servidor X que deseja ter?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A sua placa pode ter suporte para acelera��o 3D por hardware mas s� com o "
-"XFree%s.\n"
-"A sua placa � suportada pelo XFree %s que pode ter um melhor suporte para 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"A sua placa pode ter suporte para acelera��o 3D por hardware com o XFree%s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s com acelera��o 3D por hardware"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"A sua placa pode ter suporte para acelera��o 3D por hardware com o XFree%s,\n"
-"ATEN��O ESTE SUPORTE � EXPERIMENTAL E PODE CONGELAR O SEU COMPUTADOR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s com acelera��o 3D por hardware EXPERIMENTAL"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A sua placa pode ter suporte para acelera��o 3D por hardware com o XFree%s,\n"
-"ATEN��O ESTE SUPORTE � EXPERIMENTAL E PODE CONGELAR O SEU COMPUTADOR.A sua "
-"placa � suportada pelo XFree %s que pode ter um melhor suporte para 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configura��o do XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Seleccione o tamanho da mem�ria da sua placa gr�fica"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Escolha as op��es para o servidor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Escolha um monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dois par�metros cr�ticos s�o a taxa de refrescamento vertical, que � a taxa\n"
-"em que todo o ecr� � refrescado, e principalmente a taxa de sincroniza��o\n"
-"horizontal, que � a taxa em que 'scanlines' s�o mostradas.\n"
-"\n"
-"� MUITO IMPORTANTE que n�o especifique um tipo de monitor com taxa de "
-"actualiza��o\n"
-"para al�m das capacidades do seu monitor: pode danificar seu monitor.\n"
-" Se tiver d�vidas, escolha defini��es conservadoras."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Taxa de refrescamento horizontal"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Taxa de refrescamento vertical"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor n�o configurado"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Placa gr�fica ainda n�o configurada"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Resolu��es ainda n�o escolhidas"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Quer testar a configura��o?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Aviso: o teste desta placa gr�fica pode congelar o seu computador"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Teste da configura��o"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"tente alterar alguns par�metros"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ocorreu um erro:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "A sair em %d segundos"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Esta � a defini��o correcta?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ocorreu um erro, tente alterar alguns par�metros"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolu��o"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Escolha a resolu��o e a profundidade de cor"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Placa Gr�fica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Mais"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modo de Perito"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mostrar tudo"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resolu��es"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tipo de teclado: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo de Rato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo Rato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sincroniza��o Horizontal do Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Refrescamento Vertical do Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Placa Gr�fica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Placa Gr�fica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Mem�ria gr�fica: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profundidade de cor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolu��o: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Driver XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "A preparar a configura��o X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "O que deseja fazer?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Alterar Monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Alterar Placa Gr�fica"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Alterar op��es do Servidor"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Alterar Resolu��o"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostrar informa��o"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Testar de novo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Sair"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Manter altera��es?\n"
-"A configura��o actual �:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ao iniciar"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Eu posso configurar o computador para iniciar automaticamente o X ap�s o "
-"arranque.\n"
-"Gostaria de iniciar o X quando voltar a arrancar?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Por favor volte a entrar no %s para activar a altera��es"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Por favor sa�a e depois utilize Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 cores (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil cores (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil cores (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milh�es de cores (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milh�es de cores (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB ou mais"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA Padr�o, 640x480 a 60 Hz Padr�o"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compat�vel com 8514, 1024x768 a 87 Hz entrela�ado (sem 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrela�ado, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA Alargado, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA N�o-entrela�ado, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA de Alta Frequ�ncia, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequ�ncia que consegue 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequ�ncia que consegue 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequ�ncia que consegue 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor que consegue1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor que consegue1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primeiro sector da parti��o de arranque"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primeiro sector do disco (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instala��o do SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Onde quer instalar o carregador de arranque?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instala��o do LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO com menu em texto"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO com menu gr�fico"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Arrancar do DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Principais op��es do carregador de arranque"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Carregador de arranque deve usar"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instala��o do carregador de arranque"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dispositivo de arranque"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (n�o funciona com BIOS antigas)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compacto"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Modo de V�deo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Tempo de espera antes de arrancar na imagem padr�o"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Senha"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Senha (de novo)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Restringir op��es da linha de comando"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "restringir"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Limpar /tmp a cada arranque"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tamanho da RAM preciso se necess�rio (%d MB encontrados)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Activar multi-perfis"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Indicar o tamanho da RAM em Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Op��o ``Restringir op��es da linha de comando'' n�o tem uso sem senha"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Por favor tente novamente"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "As senhas n�o coincidem"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Mensagem Init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Abrir tempo de espera de Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Tempo limite de Arranque do Kernel"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Activar Arranque de CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Activar de Arranque?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "SO por omiss�o?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Aqui est�o a diferentes entradas.\n"
-"Pode adicionar mais ou alterar as existentes"
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Adicionar"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Pronto"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modificar"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Qual tipo de entrada que quer adicionar?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Outros SO (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Outros SO (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Outros SO (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imagem"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Adicionar"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Leitura-Escrita"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Inseguro"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "R�tulo"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Por omiss�o"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Tamanho-Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "SemV�deo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Remover entrada"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "N�o � permitido um r�tulo vazio"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Tem que ter uma parti��o swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Este r�tulo j� est� a ser utilizado"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Interfaces %s %s encontrados"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Tem algum outro?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Tem algum interface %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "N�o"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Sim"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ver informa��o do hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "A instalar o driver para %s placa %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(m�dulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Qual driver %s que eu deveria tentar?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Em alguns casos, o driver %s precisa de informa��es extra para funcionar\n"
-"correctamente, mas ele normalmente funciona bem sem estas informa��es.\n"
-"Deseja especificar op��es extras ou deixar o driver localizar na sua\n"
-"m�quina as informa��es que ele precisa? Ocasionalmente, isso poder�\n"
-"travar o computador, mas n�o deve causar algum dano."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Auto-procurar"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Especificar op��es"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Agora pode definir as op��es para o m�dulo %s.\n"
-"As op��es est�o no formato ``nome=valor nome2=valor2 ...''\n"
-"Para exemplo, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Op��es do m�dulo:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"O carregamento do m�dulo %s falhou.\n"
-"Quer tentar novamente com outros par�metros?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(j� adicionado %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Essa senha � demasiado simples"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Por favor indique um nome de utilizador"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"O nome de utilizador deve conter apenas letras min�sculas, n�meros, `-' e `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Este nome de utilizador j� foi adicionado"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Adicionar utilizador"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduza um utilizador\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aceitar utilizador"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nome real"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nome de utilizador"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "�cone"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Eu posso configurar o computador para iniciar automaticamente o X ap�s o "
-"arranque.\n"
-"Gostaria de iniciar o X quando voltar a arrancar?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Escolha o utilizador por omiss�o :"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Escolha o gestor de janelas a correr:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Por favor escolha o idioma a ser utilizado."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Pode escolher outros idiomas que estar�o dispon�veis ap�s a instala��o"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Tudo"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Adicionar um utilizador"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personalizado"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "A iniciar o CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Este pacote tem que ser actualizado\n"
-"Tem certeza que n�o o quer seleccionar?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bem-vindo � Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Padr�o"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paran�ico"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Este n�vel deve ser usado com cuidado. Ele torna o seu sistema mais f�cil \n"
-"de usar, mas muito sens�vel: n�o deve ser usado numa m�quina \n"
-"ligada a outras ou � Internet. N�o existe acesso por senha."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"As senhas agora est�o activadas, mas o uso como computador de rede ainda n�o "
-"� recomendado."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Esta � a seguran�a padr�o recomendada para um computador que ser� usado\n"
-"para se ligar � Internet como um cliente. Agora existem verifica��es de "
-"seguran�a. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Com este n�vel de seguran�a, o uso deste sistema como um servidor tornou-se "
-"poss�vel.\n"
-"A seguran�a agora est� alta o suficiente para usar o sistema como um\n"
-"servidor que aceita liga��es de muitos clientes. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"N�s definimos caracter�sticas n�vel 4, mas agora o sistema est� .\n"
-"totalmente fechado. As caracter�sticas de seguran�a est�o no m�ximo."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Escolha o n�vel de seguran�a"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Op��es do n�vel de seguran�a"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Escolha as op��es para o servidor"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bem vindo ao %s o seleccionador de Sistema Operativo!\n"
-"\n"
-"Escolha um Sistema Operativo da lista acima ou\n"
-"espere %d segundos pelo arranque por omiss�o.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bem-Vindo ao GRUB o seleccionador de Sistema Operativo!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use a tecla %c e %c  para escolher qual a entrada seleccionada."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Prima 'enter' para arrancar o SO seleccionado, 'e' para editar os"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "comandos antes de arrancar, ou 'c' para linha de comando."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-"A op��o seleccionada vai arrancar automaticamente dentro de %d segundos."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "n�o h� espa�o suficiente em /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Ambiente de trabalho"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menu Iniciar"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Onde quer instalar o carregador de arranque?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "nenhuma ajuda implementada ainda.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configura��o do Estilo de Arranque"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Ficheiro"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Ficheiro/_Sair"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>S"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor de Categoriza��o NewStyle"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor Tradicional"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Tradicional Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Iniciar Aurora no arranque"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Modo lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Modo yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Est� correntemente a usar %s como Gestor de Arranque.\n"
-"Clique em Configurar para iniciar o assistente de configura��o."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configurar"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Modo do sistema"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Iniciar o X-Window na inicializa��o"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "N�o, eu n�o quero autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Sim, eu quero autologin com este (utilizador, ambiente de trabalho)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "n�o poss�vel abrir /etc/inittab para leitura: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Eu n�o posso adicionar mais nenhuma parti��o"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Pode escolher outros idiomas que estar�o dispon�veis ap�s a instala��o"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Franc�s"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belga"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Alem�o"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grego"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Noruegu�s"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Sueco"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Italiano"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "s�rie"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Por favor fa�a primeiro uma c�pia de seguran�a dos seus dados"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Leia com aten��o!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se planear usar aboot, lembre-se de deixar espa�o livre (2048 sectores � "
-"suficiente)\n"
-"no in�cio do disco"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Erro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistente"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Escolher ac��o"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tem uma parti��o FAT grande \n"
-"(normalmente utilizada pelo MicroSoft Dos/Windows.)\n"
-"Sugiro que redimensione primeiro a parti��o\n"
-"(clique nela, depois clique em \"Redimensionar\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Por favor clique numa parti��o"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalhes"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "falhou ao montar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Vazio"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Outro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipos de sistema de ficheiros:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Criar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use ``%s'' ao inv�s"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Eliminar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Use ``Desmontar'' primeiro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Ap�s alterar o tipo de parti��o %s, todos os dados desta parti��o ser�o "
-"perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Escolher ac��o"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Criar uma nova parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Alternar para modo perito"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Alternar para modo normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Anular"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Continuar mesmo assim?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Sair sem guardar"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Sair sem gravar na tabela de parti��o?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Quer testar a configura��o?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Auto alocar"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Limpar tudo"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Detec��o de discos r�gidos"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Todas as parti��es prim�rias est�o usadas"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Eu n�o posso adicionar mais nenhuma parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Para ter mais parti��es, por favor elimine uma para poder criar uma parti��o "
-"extendida"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Alterar tipo de parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Tentando resgatar tabela de parti��es"
-
-#: ../../diskdrake/interactive.pm_.c:297
-#, fuzzy
-msgid "Rescue partition table"
-msgstr "Tentando resgatar tabela de parti��es"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Alterar tipo de parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Automontagem de M�dias Amov�veis"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Seleccione ficheiro"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"A tabela de parti��es de seguran�a n�o tem o \n"
-"mesmo tamanho. Continuar mesmo assim?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Aviso"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Insira uma disquete no drive\n"
-"Todos os dados na disquete ser�o perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Tentando resgatar tabela de parti��es"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Mostrar informa��o"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Ponto de Montagem"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Op��es"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Redimensionar"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Mover"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatar"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montar"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Adicionar ao RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Adicionar ao LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmontar"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Remover do RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Remover do LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modificar RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Usar para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Criar uma nova parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sector inicial: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Tamanho em MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipo do Sistema de Ficheiros: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Ponto de montagem: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Prefer�ncia: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "A formatar o ficheiro loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Alterar tipo de parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Que sistema de ficheiros deseja?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Onde deseja montar o ficheiro loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Onde deseja montar o dispositivo %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"N�o posso remover a defini��o do ponto de montagem enquanto \n"
-"a parti��o for usada para loopback. Remova o loopback primeiro"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "A computar limites do sistema de ficheiros FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "A redimensionar"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Esta parti��o n�o � redimension�vel"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Deveria fazer uma c�pia de seguran�a de todos os dados nesta parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Ap�s redimensionar a parti��o %s, todos os dados da parti��o ser�o perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Escolha o novo tamanho"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Tamanho em MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Para qual disco quer mover?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Para qual sector quer mover?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "A mover"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "A mover parti��o..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Escolha um RAID existente para adicionar a"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novo"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Escolha um LVM existente para adicionar a"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Nome do LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Essa parti��o n�o pode ser usada para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nome do ficheiro loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nome real"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "O ficheiro j� � utilizado por outro loopback, escolha outro"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "O ficheiro j� existe. Utiliz�-lo?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Op��es do m�dulo:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "n�vel"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "tamanho do bloco"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Tenha cuidado: essa opera��o � perigosa."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Que tipo de particionamento?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Lamento, eu n�o aceitarei criar /boot t�o distante no disco (num cilindro > "
-"1024).\n"
-"Ou usa o LILO e ele n�o funcionar�, ou voc� n�o usa o LILO e n�o precisar� "
-"de /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"A parti��o que voc� seleccionou para adicionar como root (/) � fisicamente "
-"localizada para al�m\n"
-"do cilindro 1024 do disco r�gido, e n�o possui uma parti��o /boot.\n"
-"Se quer usar o gestor de arranque LILO, tenha cuidado em adicionar uma "
-"parti��o /boot."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Seleccionou uma parti��o software RAID como root (/).\n"
-"Nenhum gestor de arranque n�o consegue aced�-lo sem uma\n"
-"parti��o /boot. Tenha o cuidado de adicionar uma parti��o /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "A tabela de parti��es do drive %s vai ser escrita no disco!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Precisar� re-arrancar antes que as modifica��es tenham efeito"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Ap�s formatar a parti��o %s, todos os dados desta parti��o ser�o perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "A formatar"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "A formatar o ficheiro loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "A formatar a parti��o %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid falhou"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Sem espa�o livre suficiente para alocar as novas parti��es"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Sem espa�o livre suficiente para alocar as novas parti��es"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Resolu��o: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra do drive no DOS: %s (apenas um palpite)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nome: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inicial: sector: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Tamanho: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectores"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindro %d ao cilindro %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "N�o formatado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Ficheiro(s) loopback: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Parti��o de arranque por omiss�o\n"
-"    (para arranque do MS-DOS, n�o para o lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "N�vel %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tamanho do bloco %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nome do ficheiro loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"� prov�vel que esta parti��o seja\n"
-"uma parti��o Driver, n�o lhe\n"
-"deve mexer.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Esta � uma parti��o especial\n"
-" Bootstrap serve para o \n"
-"duplo arranque do seu sistema.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamanho: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindros, %s cabe�as, %s sectores\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informa��o: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo da tabela de parti��es: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "no barramento %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Op��es: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Tipo do Sistema de Ficheiros: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Essa senha � muito simples (deve ter ao menos %d caracteres)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "As senhas n�o coincidem"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Alterar tipo de parti��o"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Por favor clique numa parti��o"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Servidor DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formata��o de %s falhou"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "N�o sei como formatar %s no tipo %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "erro a desmontar %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simples"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "N�o pode usar JFS em parti��es menores que 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "N�o pode usar ReiserFS em parti��es menores que 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Pontos de montagem devem come�ar com uma /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "J� existe uma parti��o no ponto de montagem %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "N�o pode usar LVM Logical Volume para o ponto de montagem %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Esta directoria deveria permanecer dentro do sistema de ficheiros root"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Precisa de um verdadeiro sistema de ficheiros (ext2, reiserfs) para este "
-"ponto de montagem\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "N�o pode usar LVM Logical Volume para o ponto de montagem %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Sem espa�o livre suficiente para auto-aloca��o"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erro ao abrir %s para escrita: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ocorreu um erro - nenhum dispositivo v�lido foi encontrado para criar novos "
-"sistemas de ficheiros. Por favor verifique no hardware a causa deste problema"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "N�o tem parti��es!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"O seu novo sistema operativo Mandrake Linux est� ser instalado\n"
-"Essa opera��o deve demorar algumas minutos (isso depende do tamanho que\n"
-"escolheu para instalar e a velocidade do seu computador).\n"
-"\n"
-"\n"
-"Por favor seja paciente."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Por favor escolha \"Instalar\" caso n�o exista nenhuma vers�o anterior do "
-"Mandrake Linux\n"
-"instalado ou se deseja utilizar v�rios sistemas operativos.\n"
-"\n"
-"\n"
-"Por favor escolha \"Actualizar\" se desejar actualizar uma vers�o instalada "
-"do Mandrake Linux.\n"
-"\n"
-"\n"
-"Dependendo do seu conhecimento sobre GNU/Linux, voc� pode escolher um dos "
-"seguintes n�veis para instalar\n"
-"ou actualizar o seu Mandrake Linux:\n"
-"\n"
-"* Recomendado: se nunca instalou um sistema GNU/Linux escolha esse. A "
-"instala��o ser� \n"
-"  f�cil e ser�o feitas apenas algumas perguntas.\n"
-"\n"
-"\n"
-"* Personalizado: se estiver familiarizado com o GNU/Linux, pode escolher o "
-"uso prim�rio (esta��o, \n"
-"  servidor, desenvolvimento) do seu sistema. Responder� a mais perguntas do "
-"que na classe de instala��o\n"
-"  \"Recomendada\", precisa ent�o de saber com o GNU/Linux funciona para "
-"poder escolher esse n�vel.\n"
-"\n"
-"\n"
-"* Perito: se tem um bom conhecimento sobre o GNU/Linux, pode escolher esta "
-"classe. Como \n"
-"  na classe \"Personalizado\", poder� escolher o uso prim�rio (esta��o, "
-"servidor, desenvolvimento)\n"
-"  Tenha muito cuidado antes de escolher esta classe. Poder� fazer uma "
-"instala��o bastante personalizada.\n"
-"  As respostas a algumas quest�es que podem ser dif�ceis se n�o tiver "
-"conhecimento sobre GNU/Linux.\n"
-"  N�o escolha esta classe se n�o souber o que est� a fazer."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX tentar� localizar adaptadores PCI SCSI. Se o DrakX encontrar\n"
-"um adaptador SCSI e souber qual driver a utilizar, ele ser� instalado\n"
-"automaticamente\n"
-"\n"
-"\n"
-"Se n�o possuir adaptadores SCSI, um adaptador ISA SCSI ou um PCI SCSI que\n"
-"DrakX n�o reconhece, ser� questionado sobre se algum adaptador SCSI existe "
-"no seu\n"
-"sistema. Se n�o existirem adaptadores, pode clicar em \"N�o\". Se clicar em\n"
-"\"Sim\", uma lista de drivers aparecer� para que possa escolher o seu\n"
-"adaptador.\n"
-"\n"
-"\n"
-"Se tem que especificar manualmente o seu adaptador, DrakX perguntar� \n"
-"se quer especificar op��es para ele. Pode deixar que o DrakX examine o "
-"hardware\n"
-"para descobrir as op��es. Isso normalmente funciona bem.\n"
-"\n"
-"\n"
-"Se n�o, precisar� definir as op��es para o driver. Por favor veja o Guia do "
-"Utilizador\n"
-"(cap�tulo 3, sec��o \"Recolhendo informa��es sobre o seu hardware) para "
-"dicas sobre\n"
-"como descobrir essas informa��es na documenta��o do hardware, no Web site\n"
-"do fabricante (se tiver acesso � Internet) ou no Microsoft Windows\n"
-"(se o tiver no seu sistema)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Seleccionou o(s) seguinte(s) servidor(es): %s\n"
-"\n"
-"\n"
-"Estes servidores s�o activados por omiss�o. N�o possuem nenhum problema\n"
-"de seguran�a conhecido, mas algum novo pode ser encontrado. Neste caso, "
-"certifique-se \n"
-"da sua actualiza��o logo que poss�vel.\n"
-"\n"
-"\n"
-"Deseja mesmo instalar estes servidores?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "N�o � poss�vel usar 'broadcast' sem algum dom�nio NIS"
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Insira uma disquete no drive %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para usar esta selec��o guardada de pacotes, arranque a instala��o com "
-"``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erro ao ler o ficheiro %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Algum hardware no seu computador precisa de drivers ``propriet�rios'' \n"
-"para funcionar. Pode encontrar mais informa��es em: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Tem ter uma parti��o root.\n"
-"Para isso, crie uma parti��o (ou clique numa existente).\n"
-"Ent�o escolha a ac��o ``Ponto de montagem'' e defina-a como `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Tem que ter uma parti��o swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"N�o possui uma parti��o swap\n"
-"\n"
-"Continuar mesmo assim?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Tem que ter uma parti��o swap"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Usar espa�o livre"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Sem espa�o livre suficiente para alocar as novas parti��es"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Usar a parti��o existente"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "N�o existe nenhuma parti��o para usar"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Usar a parti��o Windows para loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Qual parti��o que quer usar para o Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Escolha os tamanhos"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Tamanho da parti��o root em MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Tamanho da parti��o swap em MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Usar o espa�o livre na parti��o Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Qual parti��o que quer redimensionar?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Computando limites do sistema de ficheiros do Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"O redimensionador de FAT � incapaz de manipular sua parti��o, \n"
-"ocorreu o seguinte erro: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"A sua parti��o Windows est� muito fragmentada, corra primeiro o ``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATEN��O!\n"
-"\n"
-"Drakx vai agora redimensionar sua parti��o Windows. Tenha cuidado:\n"
-"esta opera��o � perigosa. Se o n�o tiver feito ainda, deve correr o\n"
-"scandisk do Windows (e opcionalmente correr o defrag) nesta parti��o, e\n"
-"ent�o reiniciar a instala��o. Tamb�m deveria fazer backup dos seus\n"
-"dados. Quando tiver certeza, pressione Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Quanto de espa�o quer deixar para o windows em"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "parti��o %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Falha no redimensionamento FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"N�o existem parti��es FAT para redimensionar ou para usar como loopback (ou "
-"n�o existe espa�o suficiente)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Apagar o disco inteiro"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Remover Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Tem mais de um disco r�gido, em qual deles quer instalar o linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Todas as parti��es existentes e os dados nelas contidos ser�o perdidos %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Particionamento de disco personalizado"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Usar fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Pode agora particionar %s.\n"
-"Quando terminar, n�o esque�a de guardar usando `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "N�o tem espa�o livre suficiente na sua parti��o Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "N�o consigo encontrar espa�o para instala��o"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "O assistente de particionamento DrakX encontrou as seguintes solu��es:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "O particionamento falhou: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "A ligar a rede"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "A desligar a rede"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ocorreu um erro, mas eu n�o sei como lidar com ele.\n"
-"Continue a seu pr�prio risco."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Ponto de montagem %s duplicado"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Alguns pacotes importantes n�o foram instalados correctamente.\n"
-"O seu drive de cdrom ou o seu cdrom est� defeituoso.\n"
-"Verifique o cdrom num computador instalado usando \"rpm -qpl Mandarke/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bem-vindo � %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nenhum drive de disquete dispon�vel"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "A entrar no passo `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Seu sistema est� com poucos recursos. Pode ter algum problema na\n"
-"instala��o do Mandrake Linux. Se isso ocorrer, pode tentar instalar usando "
-"o\n"
-"modo texto. Para isso, prima `F1' no quadro de inicializa��o e escreva "
-"`text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Classe de Instala��o"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Por favor escolha uma das seguintes classes de instala��o:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"O tamanho total dos grupos que seleccionou � de aproximadamente %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se deseja instalar menos que esse tamanho,\n"
-"seleccione a percentagem de pacotes que quer instalar.\n"
-"\n"
-"Uma baixa percentagem ir� instalar apenas os pacotes mais importantes;\n"
-"uma percentagem de 100%% ir� instalar todos os pacotes seleccionados."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Tem espa�o em seu disco para apenas %d%% desses pacotes.\n"
-"\n"
-"Se desejar instalar menos que este tamanho,\n"
-"seleccione a percentagem de pacotes que quer instalar.\n"
-"Uma baixa percentagem ir� instalar apenas os pacotes mais importantes;\n"
-"uma percentagem de %d%% ir� instalar o m�ximo de pacotes poss�vel."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Ser� capaz de escolher mais precisamente no pr�ximo passo"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentagem de pacotes a serem instalados"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Selec��o de Grupo de Pacotes"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Selec��o individual de pacotes"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tamanho total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pacote defeituoso"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nome: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Vers�o: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamanho: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Import�ncia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"N�o pode seleccionar esse pacote pois n�o existe espa�o livre para o instalar"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Os seguintes pacotes ser�o instalados"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Os seguintes pacotes ser�o removidos"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "N�o pode seleccionar/deselecionar esse pacote"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Este � um pacote obrigat�rio, tem que ser seleccionado"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "N�o pode deixar de seleccionar este pacote. Ele j� est� instalado"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Este pacote tem que ser actualizado\n"
-"Tem certeza que n�o o quer seleccionar?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-"N�o pode deixar de seleccionar este pacote. Ele tem que ser actualizado"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Mostrar automaticamente pacotes seleccionados"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalar"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Guardar em disquete"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Guardar selec��o de pacotes"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Sair da instala��o"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Escolha os pacotes que deseja instalar"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "A instalar"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "A estimar"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tempo restante "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Por favor aguarde, a preparar a instala��o"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pacotes"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "A instalar pacote %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aceitar"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Recusar"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Troque o seu Cd-Rom!\n"
-"\n"
-"Por favor insira o Cd-Rom rotulado \"%s\" no seu drive e prima  Ok quando "
-"estiver pronto.\n"
-"Se n�o o tiver, prima Cancelar para evitar a instala��o deste Cd-Rom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Continuar mesmo assim?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Houve um erro na ordena��o dos pacotes:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Houve um erro a instalar os pacotes:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ocorreu um erro"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Quer testar a impress�o?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Contrato de licen�a"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclado"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Por favor escolha o tipo de teclado."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Aqui est� a lista completa de teclados dispon�veis"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Que classe de instala��o deseja?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalar/Actualizar"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Isso � uma instala��o ou actualiza��o?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recomendado"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Perito"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Actualizar"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Guardar selec��o de pacotes"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Por favor escolha o tipo de rato."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Porta do Rato"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Por favor escolha a que porta s�rie o rato est� ligado."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emula��o de bot�es"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emula��o Bot�o 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emula��o Bot�o 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "A configurar cart�es PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "A configurar IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "sem parti��es dispon�veis"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Procurando parti��es para encontrar pontos de montagem"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Escolha os pontos de montagem"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"N�o consigo ler sua tabela de parti��o, � muito defeituosa para mim :(\n"
-"Eu posso tentar continuar limpando as parti��es defeituosas (TODOS OS DADOS\n"
-"ser�o perdidos!). A outra solu��o � n�o deixar o DrakX modificar a tabela\n"
-"de parti��es. (o erro � %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"O DiskDrake falhou na leitura da tabela de parti��es.\n"
-"Continue por sua conta e risco!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Escolha as parti��es que quer formatar"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Parti��o Root"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Qual a parti��o root (/) do seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Precisa reiniciar para que as modifica��es na tabela de parti��o tenham "
-"efeito"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Escolha as parti��es que quer formatar"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Verificar blocos defeituosos?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "A formatar parti��es"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "A criar e formatar ficheiro %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Sem 'swap' suficiente para completar a instala��o, por favor adicione mais"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "A procurar pacotes dispon�veis"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "A procurar pacotes para actualizar"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"O seu sistema n�o tem espa�o suficiente para instala��o ou actualiza��o (%d "
-"> %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "M�nima (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomendada (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaurar da disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaurar da disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Selec��o de Pacotes"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Insira uma disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Guardar em disquete"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "O tamanho seleccionado � maior que o espa�o dispon�vel"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se tiver todos os CDs da lista abaixo, clique em Ok.\n"
-"Se n�o tiver nenhum desses CDs, clique em Cancelar.\n"
-"Se apenas alguns CDs estiverem em falta, desmarque-os e ent�o clique em Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom rotulado como \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "A preparar a instala��o"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalando o pacote %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configura��o p�s-instala��o"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Insira uma disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Insira uma disquete vazia no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Tem agora a possibilidade de descarregar o software para codifica��o "
-"(encripta��o).\n"
-"\n"
-"ATEN��O:\n"
-"Devido a v�rios requerimentos aplic�veis � este software e impostos\n"
-"por v�rias jurisdi��es, o cliente e/ou o utilizador final deste software "
-"deve\n"
-"assegurar-se que as leis da sua jurisdi��o lhe permitem descarregar, "
-"armazenar e usar este software.\n"
-"\n"
-"Al�m disso, o cliente e/ou o utilizador final deve estar particularmente "
-"prevenido para\n"
-"n�o infringir as leis da sua jurisdi��o. Se o cliente e/ou o utilizador "
-"final\n"
-"n�o respeitar o previsto nestas leis, poder-lhe-�o ser aplicadas s�rias\n"
-"san��es.\n"
-"\n"
-"Em nenhum caso ir� a Mandrakesoft ou seu produtores e/ou seus fornecedores\n"
-"ser respons�veis por especiais, indirectos ou acidentais danos seja qual "
-"for\n"
-"(incluindo tamb�m mas n�o limitada a perda de lucros), interrup��o de "
-"neg�cios, perda de informa��o\n"
-"comercial e outras perdas monet�rias, e eventual endividamento e "
-"indemniza��o a ser\n"
-"paga, de acordo com a decis�o do tribunal) saindo do uso, posse, ou do "
-"descarregamento\n"
-"isolado deste software, do qual o cliente e/ou o utilizador final pode "
-"eventualmente\n"
-"ter acesso ap�s ter assinado o acordo presente.\n"
-"\n"
-"\n"
-"Para qualquer pergunta relacionada a esse acordo, favor entrar em contacto "
-"com: \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "A contactar o 'mirror' para obter a lista de pacotes dispon�veis"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escolha um 'mirror' de onde obter os pacotes"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "A contactar o 'mirror' para obter a lista de pacotes dispon�veis"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Qual � o seu fuso hor�rio?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "O seu rel�gio de hardware est� definido GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Servidor NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nenhuma impressora"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Tem algum outro?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sum�rio"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Rato"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Fuso hor�rio"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Impressora"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Placa RDIS"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Placa de Som"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Placa TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Impressora local"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Especificar senha do root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Nenhuma senha"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Essa senha � muito simples (deve ter ao menos %d caracteres)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentica��o?"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autentica��o?"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Servidor"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autentica��o NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Dom�nio NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Um disco de arranque oferece uma maneira de arrancar o Linux sem\n"
-"depender de um carregador de arranque normal. Isso � necess�rio se n�o "
-"quiser instalar\n"
-"o SILO no seu sistema, ou se outro sistema operativo remover o SILO, ou\n"
-"o se\n"
-"SILO n�o funcionar com o seu hardware. Um disco de inicializa��o tamb�m\n"
-"pode\n"
-"ser usado com uma imagem de backup do Mandrake deixando muito mais f�cil\n"
-"recuperar\n"
-"um sistema com danos severos.\n"
-"\n"
-"Se voc� quiser criar um disco de inicializa��o para o seu sistema, insira um "
-"disquete\n"
-"no drive e aperte em \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primeiro drive de disquetes"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Segundo drive de disquetes"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Saltar"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Uma disquete de arranque personalizada oferece uma maneira de arrancar o "
-"Linux \n"
-" sem um carregador de arranque normal. Isto � necess�rio se n�o quiser "
-"instalar\n"
-"o LILO (ou grub) no seu sistema, ou se outro sistema operativo remover\n"
-"o LILO, ou o se LILO n�o funcionar com o seu hardware. Uma disquete de "
-"arranque\n"
-"personalizada tamb�m pode ser usada com uma imagem de backup do Mandrake,\n"
-"tornando muito mais f�cil recuperar o sistema com danos graves.\n"
-"Deseja criar uma disquete de arranque para o seu sistema?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Desculpe, nenhum drive de disquetes dispon�vel"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Escolha o drive de disquetes que quer usar para criar a disquete de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Insira uma disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "A criar disquete de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "A preparar o carregador de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Quer usar o aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Erro ao instalar o aboot, \n"
-"tentar for�ar a instala��o, mesmo que isso destrua a primeira parti��o?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instalar carregador de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"A instala��o do carregador de arranque falhou. Ocorreram os seguintes erros:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Insira uma disquete vazia no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "A criar disquete de auto-instala��o"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Alguns passos n�o est�o completos.\n"
-"\n"
-"Quer realmente sair agora?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-#, fuzzy
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Parab�ns, a instala��o est� completa.\n"
-"Para informa��es sobre correc��es para esta vers�o do Mandrake Linux\n"
-"consulte a Errata dispon�vel em http://www.mandrakelinux.com/.\n"
-"\n"
-"Informa��o sobre como configurar o seu sistema est� dispon�vel no\n"
-"cap�tulo p�s-instala��o do Oficial Guia do Utilizador do Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Criar disquete de auto instala��o"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"A auto instala��o pode ser totalmente automatizada se\n"
-"quiser, neste caso, ela tomar� de conta do disco\n"
-"r�gido!! (com vista a instala��o em outra m�quina).\n"
-"\n"
-"Pode preferir repetir a instala��o.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Autom�tico"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Repetir"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Guardar selec��o de pacotes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instala��o do Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> entre op��es  | <Espa�o> selecciona | <F12> pr�ximo passo "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu em falta"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Escolher ac��o"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avan�ado"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Por favor aguarde"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informa��o"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expandir �rvore"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Encolher �rvore"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Alternar entre organiza��o plana ou em grupo"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "M� escolha, tente novamente\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Sua escolha? (por omiss�o %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Sua escolha? (por omiss�o %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Op��es: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Quer usar o aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Sua escolha? (por omiss�o %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Checo (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Alem�o"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Espanhol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Filand�s"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Franc�s"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Noruegu�s"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polaco"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russo"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sueco"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Teclado Ingl�s"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Teclado Americano"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Arm�nio (velho)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Arm�nio (m�quina de escrever)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Arm�nio (Fon�tico)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbeij�o (latino)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Arm�nio (Fon�tico)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "B�lgaro"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazileiro (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorusso"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Su��o (layout Alem�o)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Su��o (layout Franc�s)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Checo (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Alem�o (sem teclas mortas)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dinamarqu�s"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruegu�s)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estoniano"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiano (layout \"Russo\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiano (layout \"Latin\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grego"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "H�ngaro"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelense"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelense (Fon�tico)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Island�s"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiano"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japon�s 106 teclas"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Teclado coreano"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latino Americano"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituano AZERTY (velho)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituano AZERTY (novo)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituano \"n�mero de colunas\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituano \"fon�tico\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Localiza��o"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Maced�nio"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holand�s"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polaco (layout QWERTY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polaco (layout QWERTZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugu�s"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadiano (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romeno (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romeno (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russo (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Eslovaco"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovaco (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovaco (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbeij�o (cir�lico)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabela"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Teclado Tailand�s"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Teclado Tailand�s"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (modelo \"F\" tradicional)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (modelo moderno \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucraniano"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Teclado Americano (Internacional)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"n�mero de colunas\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavo (latin/cir�lico)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Montagens circulares %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Remova os volumes l�gicos primeiro\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Rato - SUN"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Rato Gen�rico PS2 com roda"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 bot�o"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Rato Gen�rico com 2 Bot�es"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Gen�rico"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Roda"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "s�rie"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Rato Gen�rico com 3 Bot�es"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech S�rie CC (s�rie)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "S�rie MM"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Mouse Logitech (serial, tipo C7 antigo)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 bot�es"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 bot�es"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "nenhum"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Nenhum Rato"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Por favor teste o rato"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Para activar o rato,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVA SUA RODA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Terminar"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Pr�ximo ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Isto est� correcto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Ligar � Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"A maneira mais comum de se ligar com adsl � pppoe.\n"
-"Mas algumas liga��es usam pptp, poucas usam dhcp.\n"
-"Se n�o sabe, escolha 'usar pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usar dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usar pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usar pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Qual cliente dhcp que deseja usar?\n"
-"Por omiss�o � dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nenhum adaptador de rede ethernet foi detectado no seu sistema.\n"
-"Eu n�o posso configurar este tipo de liga��o."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Escolha o interface de rede"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Por favor escolher o adaptador de rede que quer usar para se ligar � Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nenhuma placa de rede encontrada"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "A configurar a rede"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Por favor introduza o nome do seu anfitri�o(se souber).\n"
-"Alguns servidores DHCP requerem o nome do anfitri�o para funcionar.\n"
-"O nome do anfitri�o deve ser um nome de anfitri�o totalmente qualificado,\n"
-"como por exemplo ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nome do anfitri�o"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Assistente de Configura��o da Rede"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN externo"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Placa ISDN interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "De que tipo � sua liga��o ISDN?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Configura��o total (isdn4net)"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Configura��o total (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configura��o ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Seleccione o seu provedor.\n"
-" Se n�o estiver na lista, escolha N�o Listado"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protocolo de Arranque"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Resto do mundo"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Resto do mundo \n"
-" sem Canal-D (linhas alugadas)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Qual protocolo que quer usar?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Qual tipo de placa tem?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Eu n�o sei"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se tiver uma placa ISA, os valores do pr�ximo quadro devem estar correctos.\n"
-"\n"
-"Se tiver uma placa PCMCIA, tem que saber o irq e io da sua placa.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abortar"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continuar"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Qual � a sua placa ISDN?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Eu detectei uma placa ISDN PCI, mas n�o sei qual � o tipo. Por favor "
-"seleccione uma placa PCI no pr�ximo quadro."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nenhuma placa ISDN PCI foi encontrada. Por favor seleccione uma no pr�ximo "
-"quadro."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Por favor escolha a que porta s�rie o seu modem est� ligado."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Op��es de liga��o"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nome da liga��o"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "N�mero do telefone"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID de Login"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Baseado em script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Baseado em terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nome do dom�nio"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primeiro DNS Servidor (opcional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Second DNS Server (opcional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Pode desligar ou reconfigurar a sua liga��o."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Pode reconfigurar sua liga��o."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Est� neste momento ligado � Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Pode ligar � Internet ou reconfigurar sua liga��o."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "N�o est� neste momento ligado � Internet."
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Ligado"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Desligar..."
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Configurar rede"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Liga��o e configura��o da Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Pode desligar ou reconfigurar a sua liga��o."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Pode desligar ou reconfigurar a sua liga��o."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configura��o da Rede"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Por que est� a fazer uma instala��o em rede a sua rede j� est� configurada.\n"
-"Clique em OK para manter a configura��o, ou Cancelar para reconfigurar a sua "
-"liga��o Internet & Rede.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bem-Vindo ao Assistente de Configura��o da Rede\n"
-"\n"
-"Estamos preparados para configurar a sua liga��o de rede/Internet.\n"
-"Se n�o quiser usar a auto-detec��o, desmarque a op��o.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Escolha o perfil a configurar:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Usar auto-detec��o"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "A detectar dispositivos..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Liga��o normal via modem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detectado na porta %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Liga��o ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detectado %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Liga��o � LAN"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectado no interface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Liga��o por Cabo"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "liga��o por cabo detectada"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Liga��o � LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "placa(s) ethernet detectada(s)"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Escolha a ferramenta que deseja usar"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Liga��o � Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Quer iniciar a sua liga��o ao iniciar?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configura��o da Rede"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Ocorreu um problema ao reiniciar a rede: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Parab�ns. A configura��o da rede e da Internet acabou.\n"
-"\n"
-"A configura��o ser� agora aplicada ao seu sistema.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Depois de completado, recomendamos que reinicie o seu \n"
-"ambiente X para evitar o problema da troca de nome do anfitri�o."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"AVISO: Esse dispositivo j� foi configurado para ligar � Internet.\n"
-"Apenas aceite manter este dispositivo configurado.\n"
-"A modifica��o dos campos abaixo ir� sobrepor esta configura��o."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Por favor introduza a configura��o IP para esta m�quina.\n"
-"Cada item deve ser introduzido como endere�o IP ponteado-decimal\n"
-"(por exemplo, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "A configurar dispositivo de rede %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Endere�o IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP Autom�tico"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "O endere�o IP deve estar no formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Por favor introduza o nome do seu anfitri�o.\n"
-"O nome do anfitri�o deve ser um nome de anfitri�o totalmente qualificado,\n"
-"como por exemplo ``mybox.mylab.myco.com'' .\n"
-"Tamb�m pode introduzir o endere�o IP de um gateway se tiver um"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Servidor DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dispositivo de gateway"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configura��o de proxies"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "O proxy deve ser http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "O proxy deve ser ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configura��o da Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Quer tentar ligar-se � Internet agora?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "A testar a sua liga��o..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "O sistema est� agora ligado � Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Por raz�es de Security, ser� desligado(a) agora."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"O sistema n�o aparenta estar ligado � Internet.\n"
-"Tente reconfigurar a sua liga��o."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configura��o da Liga��o"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Por favor preencha ou verifique os campos abaixo"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ da Placa"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Mem�ria da Placa (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO da Placa"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_O da Placa"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 da Placa"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "O seu n�mero de telefone pessoal"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nome do provedor (ex: provedor.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "N�mero do telefone do provedor"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Provider dns 1 (opcional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Provider dns 2 (opcional)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Escolha o seu teclado"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Modo de marca��o"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Tipo de Liga��o:"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tipo de Liga��o:"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Nome do utilizador da conta"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Senha da conta"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "falhou ao montar: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Parti��o extendida n�o � suportada nesta plataforma"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Tem um buraco na sua tabela de parti��es e eu n�o a posso usar.\n"
-"A �nica solu��o � mover as suas parti��es prim�rias para ter o buraco "
-"pr�ximo das parti��es extendidas"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "A restaura��o pelo ficheiro %s falhou: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Ficheiro de c�pia de seguran�a defeituoso"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erro ao escrever no ficheiro %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Algo mau est� acontecer no seu drive. \n"
-"O teste que verifica a integridade dos dados falhou. \n"
-"Isso significa que escrever algo no disco resultar� em lixo aleat�rio."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "obrigat�rio"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "muito bom"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bom"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "talvez"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Servidor lpd remoto"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Impressora da rede (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servidor de Impress�o"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Dispositivo de Impress�o URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Erro ao escrever no ficheiro %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(m�dulo %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP do servidor CUPS"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Por omiss�o)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Seleccionar Liga��o da Impressora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Como est� a impressora ligada?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Com um servidor CUPS remoto, n�o tem que configurar\n"
-"nenhuma impressora aqui; elas ser�o detectadas automaticamente.\n"
-"Se tiver d�vidas, seleccione \"Servidor CUPS remoto\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Configura��o"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "O endere�o IP deve estar no formato 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "O n�mero da porta deve ser num�rico"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Porta"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configura��o do Estilo de Arranque"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "A detectar dispositivos..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Testar portas"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Usar auto-detec��o"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "detectado %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Dispositivo de Impress�o URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Por favor escolha a que porta s�rie o seu modem est� ligado."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Dispositivo de Impress�o URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Configura��o da Internet"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "A instalar pacote %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "A instalar pacote %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Op��es da impressora lpd Remota"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Para usar uma fila de impress�o lpd remota, precisa indicar\n"
-"o nome do anfitri�o e o servidor de impress�o e o nome da\n"
-"fila naquele servidor."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nome do anfitri�o remoto"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nome do anfitri�o remoto"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nome do anfitri�o remoto"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Op��es de Impress�o SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Para imprimir numa impressora SMB, precisa indicar o nome do \n"
-"anfitri�o SMB (Nota! Ele pode ser diferente do anfitri�o TCP/IP!) e \n"
-"possivelmente o endere�o IP do servidor de impress�o, como tamb�m\n"
-" o nome de partilha para a impressora que deseja aceder e qualquer \n"
-"informa��o aplic�vel sobre nome de utilizador, senha e grupo de trabalho."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Anfitri�o servidor SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP do servidor SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nome de partilha"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grupo de trabalho"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Op��es de Impress�o NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Para imprimir numa impressora NetWare, precisa indicar o\n"
-"nome do servidor de impress�o NetWare (Nota: ele pode ser diferente\n"
-"do servidor TCP/IP!) como tamb�m o nome da fila de impress�o para a "
-"impressora\n"
-"que deseja aceder como qualquer nome de utilizador e senha aplic�vel."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Servidor de Impress�o"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nome da Fila de Impress�o"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Op��es da Impressora 'Socket'"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Para imprimir numa impressora 'socket', precisa indicar o \n"
-"nome do servidor da impressora e a n�mero da porta (opcional)."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Nome do Servidor da impressora"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Nome do Servidor da impressora"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Dispositivo de Impress�o URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nome da impressora"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Descri��o"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Localiza��o"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Isto est� correcto?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Liga��o da Impressora"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Qual tipo de impressora que tem?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configura��o da Internet"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configura��o da Internet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Quer testar a impress�o?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Testar portas"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Sim, imprimir ambas as p�ginas de teste"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Impressora"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Padr�o"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "A imprimir p�gina(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "A imprimir p�gina(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "A imprimir p�gina(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "A imprimir p�gina(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"A(s) p�gina(s) foi(foram) enviada(s) para o dem�nio de impress�o.\n"
-"Pode demorar algum tempo antes da impress�o come�ar.\n"
-"Estado da impress�o:\n"
-"%s\n"
-"\n"
-"Est� a funcionar correctamente?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"A(s) p�gina(s) foi(foram) enviada(s) para o dem�nio de impress�o.\n"
-"Pode demorar algum tempo antes da impress�o come�ar.\n"
-"Est� a funcionar correctamente?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Fechar"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "A desligar a rede"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "A desligar a rede"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Op��es da impressora"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configura��o da Internet"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-#, fuzzy
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"O nome da impressora deve apenas conter letras, n�meros e 'underscore' '_'"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "A iniciar a sua liga��o..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configurar rede"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor n�o configurado"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "A configurar a rede"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Alto"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paran�ico"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Seleccionar Liga��o da Impressora"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Que sistema de impress�o deseja usar?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configurar Impressora"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "A instalar pacote %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Op��es da impressora"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Configurar Impressora"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Deseja configurar uma impressora?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Impressora"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Aqui est�o as seguintes filas de impress�o.\n"
-"Pode adicionar mais ou modificar as existentes."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Aqui est�o as seguintes filas de impress�o.\n"
-"Pode adicionar mais ou modificar as existentes."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Configurar rede"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modo Normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Quer testar a configura��o?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configura��o da Internet"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Quer testar a configura��o?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Liga��o � Internet"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Liga��o da Impressora"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "A imprimir p�gina(s) de teste..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Quer testar a configura��o?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Quer testar a impress�o?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configura��o de Proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Bem vindo ao utilit�rio de configura��o de proxy.\n"
-"\n"
-"Aqui, poder� definir as proxies http e ftp\n"
-"com ou sem utilizador e palavra-passe\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Por favor preencha as informa��es da proxy para http\n"
-"Deixe em branco se n�o deseja uma proxy para http"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "porta"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "O Url deve come�ar com 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "A parte da porta deve ser num�rica"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Por favor preencha as informa��es da proxy para ftp\n"
-"Deixe em branco se n�o deseja uma proxy para ftp"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "O Url deve come�ar com 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Por favor introduza o utilizador e palavra-passe para proxy, se existir.\n"
-"Deixe em branco se n�o desejar utilizador/palavra-passe"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "utilizador"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "palavra-passe"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "reintroduza a palavra-passe"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "As palavras-passe n�o coincidem. Tente novamente!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "N�o � poss�vel adicionar parti��o ao RAID _formatado_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "N�o poss�vel escrever o ficheiro %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid falhou"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid falhou (talvez as raidtools estejam em falta?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Sem parti��es suficientes para RAID n�vel %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Inicia o sistema de som ALSA (Advanced Linux Sound Architecture) "
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, um calendarizador de comando peri�dicos"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd � usado para monitorizar o estado da bateria e registando-o via "
-"syslog.\n"
-"Pode ser usado tamb�m para desligar a m�quina quando a bateria estiver fraca."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Executa comandos agendados pelo comando at na hora especificada quando\n"
-"at foi executado, e executa comandos em grupo de comandos quando o uso de "
-"mem�ria estiver suficientemente baixo."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron � um programa UNIX padr�o que executa programas especificados pelo\n"
-"utilizador em horas marcadas. vixie cron adiciona v�rias caracter�sticas ao "
-"UNIX\n"
-"cron b�sico, incluindo melhor seguran�a e melhores op��es de configura��o."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM adiciona suporte de rato a aplica��es Linux em modo de texto\n"
-"tal como o Midnight Commander. Permite tamb�m copiar e colar utilizando\n"
-"o rato e inclui suporte para menus pop-up na consola."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"O HardDrake sonda o hardware, e opcionalmente\n"
-"configura hardware novo ou alterado."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache � um servidor World Wide Web. Ele � usado para servir ficheiros\n"
-"HTML e CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"O dem�nio (daemon) Internet superserver(normalmente chamado inetd) inicia\n"
-"uma variedade de outros servi�os de Internet quando necess�rio. � "
-"respons�vel\n"
-"pela inicializa��o de v�rios servi�os, incluindo telnet, ftp, rsh e rlogin. "
-"Desactivando o inetd, todos os servi�os pelos quais � respons�vel \n"
-"tamb�m s�o desactivados."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Inicie o filtro de pacotes para Linux kernel 2.2, para criar \n"
-"uma firewall afim de proteger a sua m�quina de ataques de rede."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Este pacote carrega o mapa de teclado seleccionado como\n"
-"definido em /etc/sysconfig/keyboard. Isto pode ser seleccionado usando o\n"
-"utilit�rio kbdconfig. Deve deixar isto activado para a maioria da m�quinas."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Regenera��o autom�tica do 'kernel header' em /boot \n"
-"para /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Detec��o e configura��o autom�tica de hardware no arranque."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"O Linuxconf ir� por vezes executar v�rias tarefas\n"
-"no arranque para manter a configura��o do sistema."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd � o dem�nio de impress�o obrigat�rio para o lpr funcionar "
-"correctamente.\n"
-"Ele � basicamente um servidor que controla os trabalhos para a(s) impressora"
-"(s)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, usado para criar um servidor de alta\n"
-"desempenho e disponibilidade."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) � um Servidor de Nome de Dom�nio (DNS) que � usado para\n"
-"transformar nomes de servidores em endere�os IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta e desmonta todos os pontos de montagem do Network File\n"
-"System (NFS), SMB (Gestor de Rede/Windows) e NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/Desactiva todas os interfaces de rede configurados para iniciar\n"
-"no arranque."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS � um protocolo popular usado na partilha de ficheiros atrav�s\n"
-"de redes TCP/IP. Esse servi�o oferece a funcionalidade do servidor NFS, que "
-"� configurado atrav�s do ficheiro /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS � um protocolo popular usado na partilha de ficheiros atrav�s de redes\n"
-"TCP/IP. Esse servi�o oferece a funcionalidade de bloquear ficheiros NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automaticamente ligar o teclado num�rico na consola\n"
-"e XFree no arranque."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Suporte a OKI 4w e 'winprinters' compat�veis."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Suporte PCMCIA � utilizado normalmente para suportar coisas como\n"
-"ethernet ou modems em port�teis. Ele n�o ser� iniciado a n�o ser que seja "
-"configurado de maneira que\n"
-"seguro estar instalado em m�quinas que n�o precisem dele."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"O portmapper gere liga��es RPC, que s�o usadas por\n"
-"protocolos como NFS ou NIS. O servidor portmap tem que estar a correr nas "
-"m�quinas\n"
-"que actuar�o como servidores para os protocolos que utilizam o mecanismo RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix � um Agente de Transporte de Correio, um programa\n"
-"que move mensagens de correio de uma m�quina para outra."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Guarda e restaura o 'entropy pool' do sistema para melhor qualidade\n"
-"na gera��o aleat�ria de n�meros."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Designa dispositivos 'raw' a dispositivos de bloco (como \n"
-"parti��es de disco duro), para o uso de aplica��es como Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"O dem�nio routed permite a actualiza��o autom�tica da tabela IP Router\n"
-"atrav�s do protocolo RIP. Enquanto o RIP � usado largamente em pequenas\n"
-"redes, protocolos de 'routing' mais complexos s�o necess�rios em redes mais "
-"complexas."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"O protocolo rstat permite que utilizadores da rede recebam\n"
-"informa��es sobre a performance de qualquer m�quina naquela rede."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"O protocolo rusers permite que os utilizadores de uma rede identifiquem\n"
-"quem est� registado (logged) noutras m�quinas que respondam."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"O protocolo rwho permite que utilizadores remotos obtenham uma lista de "
-"todos os\n"
-"utilizadores registados (logged) numa m�quina a correr o dem�nio rwho "
-"(similar ao finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Iniciar o sistema de som na sua m�quina"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog � uma capacidade que muitos dem�nios usam para registar mensagens\n"
-"em v�rios ficheiros de registo. � uma boa ideia correr sempre o syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Carrega os driver para os seus dispositivos usb."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Inicia o Servidor X Font (essencial para o XFree funcionar)"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Escolha quais os servi�os que devem ser inicializados automaticamente na "
-"altura do arranque"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Impressora"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Modo do sistema"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Op��es da impressora lpd Remota"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Base de Dados"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servi�os"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "a correr"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "parado"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servi�os e dem�nios"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"N�o h� informa��o adicional\n"
-"sobre este servi�o, lamento."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ao arrancar"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Estado:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sector"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Resto do mundo"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Acesso Internet"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multim�dia - Gr�ficos"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Desenvolvimento"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Centro de Controlo"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Interface de rede"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Anfitri�o servidor SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Jogos"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Perito"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "A instalar pacote %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Eu n�o consigo ler sua tabela de parti��es, � demasiado defeituosa\n"
-"para mim. Tentarei continuar limpando as parti��es defeituosas"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Erro"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Configura��o p�s-instala��o"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configura��o do Estilo de Arranque"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Parab�ns!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalar"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Adicionar um utilizador"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "A formatar o ficheiro loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Ficheiro de c�pia de seguran�a defeituoso"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Ficheiro de c�pia de seguran�a defeituoso"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Ficheiro de c�pia de seguran�a defeituoso"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Selec��o de Pacotes"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Por favor escolha os pacotes que quer instalar."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Remover entrada"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Remover Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Nome de utilizador"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Por favor teste o rato"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Por favor tente novamente"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Por favor tente novamente"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "reintroduza a palavra-passe"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Liga��o � LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Seleccionar Liga��o da Impressora"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Por favor escolha o tipo de teclado."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Por favor clique numa parti��o"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Por favor escolha os pacotes que quer instalar."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Ficheiro de c�pia de seguran�a defeituoso"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Por favor teste o rato"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Ficheiro de c�pia de seguran�a defeituoso"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Nome de utilizador"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Por favor escolha os pacotes que quer instalar."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Por favor escolha o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Detec��o de discos r�gidos"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Nome de utilizador"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Roda"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Roda"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Op��es do m�dulo:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Configura��o da Rede"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Por favor escolha os pacotes que quer instalar."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Por favor escolha os pacotes que quer instalar."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Configurar sistemas de ficheiros"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Op��es"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Por favor escolha a que porta s�rie o seu modem est� ligado."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Configura��o da Rede"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Ficheiro de c�pia de seguran�a defeituoso"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Por favor escolha o tipo de rato."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Ficheiro de c�pia de seguran�a defeituoso"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Por favor escolha o tipo de rato."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Outro"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instalar sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Personalizado"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Anterior"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Estado:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Ficheiro de c�pia de seguran�a defeituoso"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Personalizado"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Pr�ximo ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Escolha os pacotes a serem instalados"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Por favor escolha o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Por favor escolha o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Por favor escolha o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Ficheiro de c�pia de seguran�a defeituoso"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Ficheiro de c�pia de seguran�a defeituoso"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Ficheiro de c�pia de seguran�a defeituoso"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "A detectar dispositivos..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Por favor teste o rato"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Por favor escolha os pacotes que quer instalar."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Configura��o da Rede"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Configura��o da Rede"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Configura��o"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Configura��o LAN"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Configurar sistemas de ficheiros"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "A Instala��o do %s falhou. Ocorreram os seguintes erros:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "nenhuma placa de rede encontrada"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Pronto"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "A preparar a instala��o"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "restringir"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatar parti��es"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Configura��o LAN"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Ponto de Montagem"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Escolha as parti��es que quer formatar"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Escrit�rio"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Abortar"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Impressora"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instalar sistema"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Seleccione ficheiro"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Impressora remota"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Mensagem Init"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Nenhum adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalar"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Nenhum adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Sair da instala��o"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Partilha da Liga��o � Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "A Partilha da Liga��o � Internet est� activa"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configura��o da Partilha da Liga��o � Internet j� foi feita.\n"
-"Est� neste momento activa.\n"
-"\n"
-"O que deseja fazer?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "desactivar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "libertar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "reconfigurar"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "A desactivar servidores..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Partilha da Liga��o � Internet est� agora desactivada."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "A Partilha da Liga��o � Internet est� actualmente desactivada"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configura��o da Partilha da Liga��o � Internet j� foi feita.\n"
-"Est� neste momento desactivada.\n"
-"\n"
-"O que deseja fazer?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "activar"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "A activar servidores..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Partilha da Liga��o � Internet est� agora activa."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Est�s prestes a configurar o seu computador para partilhar a Liga��o � "
-"Internet.\n"
-"Com esta capacidade, outros computadores na sua rede local poder�o usar a "
-"liga��o � Internet deste computador\n"
-"\n"
-"Nota: necessita de um Adaptador de Rede dedicado para configurar uma Rede de "
-"�rea Local (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (a usar m�dulo %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nenhum adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nenhum adaptador de rede foi encontrado no seu sistema. Por favor execute a "
-"ferramenta de configura��o de hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Existe apenas um adaptador de rede configurado no seu sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Estou prestes a configurar a sua Rede de �rea Local com esse adaptador."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Por favor escolha qual adaptador de rede que estar� ligado a sua Rede de "
-"�rea Local."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor n�o configurado"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Configura��o do Estilo de Arranque"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Configura��o da Internet"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencial conflito de endere�os de LAN encontrado na configura��o actual de %"
-"s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Configura��o de firewall detectada!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Aviso! Uma configura��o de firewall existente foi detectada. Pode necessitar "
-"de configura��o manual depois da instala��o."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "A configurar..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "A configurar scripts, a instalar software, iniciando servidores..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas a instalar o pacote %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Tudo foi configurado.\n"
-"Pode agora partilhar a sua Liga��o � Internet com outros computadores na sua "
-"Rede Local, usando a configura��o de rede autom�tica (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "A configura��o j� foi feita, mas est� actualmente desactivada."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "A configura��o j� foi feita, e est� actualmente activa."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Nenhuma Partilha da Liga��o � Internet foi alguma vez configurada."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configura��o da Partilha de Liga��o � Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Bem-Vindo ao utilit�rio de Partilha da Liga��o � Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Clique em Configurar para iniciar o assistente de configura��o."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configura��o de Rede (%d adaptadores)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Eliminar perfil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Perfil a eliminar:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Novo perfil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Hostname: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Acesso Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Estado:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configurar Acesso � Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configura��o LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocolo"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Estado:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configurar Rede de �rea Local."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistente..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Aplicar"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Por favor aguarde... A aplicar a configura��o"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Ligado"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "N�o ligado"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Ligar..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Desligar..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"N�o tem nenhum interface configurado.\n"
-"Para configurar primeiro clique em 'Configurar'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configura��o LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocolo de Arranque"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Iniciado ao arrancar"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Activo"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Activo"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"N�o tem nenhuma liga��o � Internet.\n"
-"Crie uma clicando em 'Configurar'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configura��o da Liga��o � Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configura��o da Liga��o � Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipo de Liga��o:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Par�metros"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Placa Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP Client"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Op��es do n�vel de seguran�a"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro de Controlo"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Escolha a ferramenta que deseja usar"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Canadiano (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Island�s"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "s�rie"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uso: keyboarddrake [--expert] [teclado]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Por favor escolha o tipo de teclado."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Deseja que o BackSpace funcione como Delete na consola?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Troque de  CD-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Por favor insira o CD-Rom de Instala��o no seu drive e prima OK quando "
-"estiver pronto.\n"
-"Se n�o o tiver, prima Cancelar para evitar a actualiza��o directa."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "N�o � poss�vel iniciar actualiza��o directa!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Mostrar apenas para este dia"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Ficheiro/_Novo"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Ficheiro/_Abrir"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Ficheiro/_Guardar"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Ficheiro/Guardar _Como"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Ficheiro/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Op��es"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Op��es/Teste"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Ajuda"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Ajuda/_Sobre..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Nome de utilizador"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "mensagens"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "pesquisa"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Uma ferramenta para monitorizar os seus logs"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Configura��o"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "correspond�ncia"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "mas n�o h� correspond�ncia"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Escolha ficheiro"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Calend�rio"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Conteudo do ficheiro"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "aguarde por favor, a analisar ficheiro: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Configura��o leve"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Bem vindo ao utilit�rio de configura��o de proxy.\n"
-"\n"
-"Aqui, poder� definir as proxies http e ftp\n"
-"com ou sem utilizador e palavra-passe\n"
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache e Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "Servi�os"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "A formatar"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Configura��o da Internet"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Guardar como..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Por favor escolha o tipo de rato."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nenhum usb_s�rie encontrado\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Deseja emula��o de 3 bot�es?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Seleccione uma placa gr�fica"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Dispositivo de arranque"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Configura��o de firewalling"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Configura��o de firewalling"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"J� configurou a firewalll.\n"
-"Clique em Configurar para alterar ou remover a firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"Clique em Configurar para configurar uma firewall padr�o"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Escolha a seu idioma"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Seleccione a classe da instala��o"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detec��o de discos r�gidos"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configurar rato"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Escolha o seu teclado"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Seguran�a"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Configurar sistemas de ficheiros"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatar parti��es"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Escolha os pacotes a serem instalados"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Adicionar um utilizador"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configurar rede"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configurar servi�os"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instalar carregador de arranque"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Criar um disco de arranque"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configurar X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Sair da instala��o"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configurador do tinyfirewall\n"
-"\n"
-"Configura uma firewall pessoal para esta m�quina Linux Mandrake.\n"
-"Para uma firewall poderosa e dedicada, por favor procure a \n"
-"distribui��o especializada MandrakeSecurity Firewall"
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Est� a correr um servidor de nomes nesta m�quina? Se n�o definiu \n"
-"um para enviar informa��es de IP e zona a toda a Internet por favor \n"
-"responda n�o.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Deseja autorizar liga��es Secure Shell (ssh) recebidas do exterior? \n"
-"Isto � um substituto de telnet que pode utilizar para efectuar o login.\n"
-"Se estiver a utilizar telnet agora, deve mudar para ssh. telnet n�o � \n"
-"encriptado -- possibilitando o roubo da sua palavra-passe se o usar\n"
-"ssh � encriptado e n�o autoriza este 'eavesdropping'."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Deseja autorizar liga��es telnet recebidas do exterior?\n"
-"Isto � muito inseguro, como j� explicamos. N�s recomendamos\n"
-"vivamente responder N�o aqui e usar ssh em vez de telnet.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Est� a correr um servidor FTP aqui que necessita que esteja acess�vel na\n"
-"Internet? Se estiver, recomendamos que apenas o utilize para transfer�ncias\n"
-"An�nimas. Quaisquer palavras-passe enviadas por FTP podem ser roubadas,\n"
-" uma vez que o FTP tamb�m n�o utiliza encripta��o para palavras-passe.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Est� a correr um servidor de correio aqui? Se est� a enviar a si \n"
-"mensagens atrav�s do pine, mutt ou outro cliente de correio base-\n"
-"ado em texto provavelmente est�. De outra forma deveria remover \n"
-"o firewall para isto.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Esta a correr um servidor POP OU IMAP aqui? Isto seria\n"
-"usado para albergar contas de correio n�o baseadas na web\n"
-"para pessoas via esta m�quina.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Aparentemente est� a correr um kernel 2.2.  Se o seu IP de \n"
-"Rede � automaticamente definido por um computador na sua \n"
-"casa ou escrit�rio (dinamicamente atribu�do), necessitamos \n"
-"permitir isto. � este o caso?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"O seu computador est� a sincronizar a hora com outro computador?\n"
-"Isto � usado por maioritariamente por organiza��es Unix/Linux m�dias-\n"
-"grandes para sincronizar a hora para registos e assim. Se n�o faz parte \n"
-"de um grande escrit�rio e nunca ouviu falar disto, provavelmente n�o \n"
-"estar�."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Configura��o completa.  Posso escrever estas mudan�as no disco?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "N�o � poss�vel abrir %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "N�o � poss�vel abrir %s para escrita: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Configura��o de firewalling"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Por favor aguarde, a preparar a instala��o"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Computador de Rede (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servidor NFS, Servidor SMB, Servidor Proxy, Servidor SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Escrit�rio"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Esta��o de Trabalho Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Ferramentas para o seu Palm Pilot ou Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Esta��o de Trabalho"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Servidor de Nome do Dom�nio e Informa��o de Rede"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programas de Escrit�rio: texto (kword, abiword), folhas de c�lculo (kspread, "
-"gnumeric), visualizadores pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Ferramentas para audio: reprodutores mp3 ou midi, misturadores, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Livros e Howto's sobre o Linux e Software Livre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Esta��o de Trabalho KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multim�dia - V�deo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conjunto de ferramentas para correio electr�nico, news, web, transfer�ncia "
-"de ficheiros e chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Base de Dados"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Servidor de Bases de Dados PostgreSQL ou MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Ferramentas para facilitar a configura��o do seu computador"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multim�dia - Som"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilit�rios"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documenta��o"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Ferramentas de terminal"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix servidor de correio, Inn servidor de news "
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Esta��o de Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Esta��o Multim�dia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configura��o"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Mais Ambientes de Trabalho Gr�ficos (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment, o ambiente gr�fico b�sico com a colec��o de "
-"ferramentas que o acompanham"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ambiente Gr�fico"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache e Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Ferramentas para criar e gravar CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Esta��o de Trabalho de Escrit�rio"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Aplica��es para gr�ficos como o The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-"C e C++ bibliotecas de desenvolvimento, programas e ficheiros 'include'"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Computador de Rede Servidor"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Esta��o de Jogo"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Reprodutores de V�deo e editores"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multim�dia - Gr�ficos"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programas de divertimento: arcade, tabuleiros, estrat�gia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conjunto de ferramentas para ler e enviar correio electr�nico e news (pine, "
-"mutt, tin...) e para navegar na Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arquivo, emuladores, monitoriza��o"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finan�as Pessoais"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Um ambiente gr�fico com um conjunto de aplica��es e ferramentas de ambiente "
-"de trabalho f�ceis de usar"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clientes para diferentes protocolos incluindo ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Gateway Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Aplica��es de som e v�deo reprodu��o/edi��o"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Outros Ambientes de Trabalho Gr�ficos"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editores, linhas de comando, ferramentas de ficheiro, terminais"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programas para gerir as suas finan�as, como o gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gest�o de Informa��es Pessoais"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multim�dia - Grava��o de CDs"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Esta��o de Trabalho Cient�fica"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Abortar"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "Pronto"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Escolha o utilizador por omiss�o :"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Impressora remota"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Agora pode indicar as op��es para o m�dulo %s."
-
-#~ msgid "Low"
-#~ msgstr "Baixo"
-
-#~ msgid "Medium"
-#~ msgstr "M�dio"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Alguns melhoramentos para este n�vel de seguran�a, o principal � \n"
-#~ "que existem mais avisos e testes de seguran�a."
-
-#~ msgid "mount failed"
-#~ msgstr "falhou ao montar"
-
-#~ msgid "Boot mode"
-#~ msgstr "Modo de arranque"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Perito"
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Ligar � Internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Desligar da Internet"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Configurar liga��o de rede (LAN ou Internet)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Para qual disco quer mover?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Por favor escolha os pacotes que quer instalar."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Informa��o"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Esta��o de Trabalho Gnome"
-
-#~ msgid "authentification"
-#~ msgstr "autentica��o"
-
-#~ msgid "user"
-#~ msgstr "utilizador"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Por favor escolha o tipo de rato."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Sair"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Automontagem de M�dias Amov�veis"
-
-#~ msgid "Active"
-#~ msgstr "Activo"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "N�o"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Uma impressora, modelo \"%s\", foi detectado no(a) "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Dispositivo de Impressora Local"
-
-#~ msgid "Printer Device"
-#~ msgstr "Dispositivo da Impressora"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Servidor CUPS remoto"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Servidor CUPS remoto"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Modo do sistema"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Outro"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Por favor escolha o tipo de teclado."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Por favor clique numa parti��o"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tipo: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Ficheiro de c�pia de seguran�a defeituoso"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Configurar X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Dispositivo da Impressora"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Cancelar"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Ok"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Fechar"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "A iniciar a sua liga��o..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "A fechar a sua liga��o..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "A liga��o n�o est� fechada.\n"
-#~ "Tente faz�-lo manualmente executando\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "como root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "O sistema est� agora desligado."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Escolha o tamanho que deseja instalar"
-
-#~ msgid "Total size: "
-#~ msgstr "Tamanho total:"
-
-#~ msgid "Please wait, "
-#~ msgstr "Por favor aguarde, "
-
-#~ msgid "Total time "
-#~ msgstr "Tempo total "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Usar a configura��o existente para o X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "A que dispositivo a sua impressora est� ligada \n"
-#~ "(note que /dev/lp0 � equivalente a LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr "Aviso, o adaptador de rede j� est� configurado. Vou reconfigur�-lo."
-
-#~ msgid "New"
-#~ msgstr "Novo"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Fila remota"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Por favor clique numa parti��o"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Ambiguidade (%s), seja mais preciso\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (por omiss�o %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Sua escolha? (por omiss�o %s introduza `nenhum' para nenhum) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "n�o poss�vel abrir /etc/sysconfig/autologin para leitura: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Deseja reiniciar a rede"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Concorda?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Estou pronto a reiniciar o dispositivo de rede:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Estou pronto para reiniciar o dispositivo de rede %s. Concorda?"
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Tipo de Liga��o:"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Escolha o utilizador por omiss�o :"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Teste aqui o rato."
-
-#~ msgid "What type of printer do you have?"
-#~ msgstr "Qual tipo de impressora que tem?"
-
-#~ msgid "Do you want to test printing?"
-#~ msgstr "Quer testar a impress�o?"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Agora pode testar seu rato. Use os bot�es e a roda para\n"
-#~ "verificar se as configura��es est�o correctas. Se n�o estiverem, pode "
-#~ "clicar\n"
-#~ "em \"Cancelar\" e escolher outro driver."
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Para ter um sistema mais seguro, deve escolher \"Usar ficheiro shadow\"\n"
-#~ "e \"Usar senhas MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Se a sua rede usa NIS, seleccione \"Usar NIS\". Se n�o sabe, pergunte\n"
-#~ "ao seu administrador de rede."
-
-#~ msgid "yellow pages"
-#~ msgstr "p�ginas amarelas"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 do provedor"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 do provedor"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Liga��o DSL (ou ADSL)"
-
-#~ msgid "Choose"
-#~ msgstr "Escolha"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Voc� pode directamente especificar o URI para aceder � impressora com CUPS"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Sim, imprimir p�gina de teste ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Sim, imprimir p�gina de teste PostScript"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "Sim, imprimir ambas as p�ginas de teste"
-
-#~ msgid "Paper Size"
-#~ msgstr "Tamanho do Papel"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Ejectar p�gina ap�s trabalho de impress�o?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Op��es do driver Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Op��es da profundidade de cor"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Imprimir texto como PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Corrigir texto com stair-stepping?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "N�mero de p�ginas por p�ginas de sa�da"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Margem Direita/Esquerda em pontos (1/72 de polegada)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Margem Superior/Inferior em pontos (1/72 de polegada)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Op��es extras de GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Op��es extras de Texto"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inverter a ordem das p�ginas"
-
-#~ msgid "Reading CUPS drivers database..."
-#~ msgstr "Lendo banco de dados de drivers do CUPS"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Seleccionar liga��o de impressora remota"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "Com um servidor CUPS remoto, n�o tem que configurar\n"
-#~ "nenhuma impressora aqui; elas ser�o detectadas automaticamente.\n"
-#~ "Se tiver d�vidas, seleccione \"Servidor CUPS remoto\"."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Cada impressora precisa de um nome (por exemplo\n"
-#~ "lp). Outros par�metros, tal como a descri��o da impressora ou sua\n"
-#~ "localiza��o podem ser definidas. Qual nome que deve ser usado para \n"
-#~ " esta impressora e como a impressora est� ligada?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Cada fila de impress�o (� qual as impress�es s�o dirigidas) precisa\n"
-#~ "de um nome (normalmente lp) e de uma directoria de spool associada.\n"
-#~ "Qual o nome e a directoria que devem ser utilizados para esta fila?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nome da fila de impress�o"
-
-#~ msgid "Spool directory"
-#~ msgstr "Directoria de spool"
diff --git a/perl-install/share/po/pt_BR.po b/perl-install/share/po/pt_BR.po
deleted file mode 100644
index ec0a82624..000000000
--- a/perl-install/share/po/pt_BR.po
+++ /dev/null
@@ -1,12055 +0,0 @@
-# DRAKX PT_BR PO FILE.
-# Copyright (C) 2000 MandrakeSoft
-# Andrei Bosco Bezerra Torres <andreibt@uol.com.br>, 1999-2000
-# Bruno Dorfman Buys <brunobuys@zipmail.com.br>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-02-20 23:55GMT -2\n"
-"Last-Translator: Bruno Dorfman Buys <brunobuys@zipmail.com.br>\n"
-"Language-Team: Portugues\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configurar todas as cabe�as independentemente"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Usar extens�o Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configurar apenas placa \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Configura��o multi-cabe�a"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Seu sistema suporta configura��o de cabe�a m�ltipla.\n"
-"O que voc� quer fazer?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Placa Gr�fica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Selecione uma placa gr�fica"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Escolha um servidor X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Servidor  X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Escolha um servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "Servidor  X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Qual configura��o do XFree voc� quer ter?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Seu placa suporta acelera��o hardware 3D mas apenas com o XFree %s.\n"
-"Sua placa � suportada pelo XFree %s que pode ter melhor suporte 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Sua placa suporta acelera��o hardware 3D com o XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s com acelera��o hardware 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Seu placa suporta acelera��o hardware 3D com o XFree %s,\n"
-"NOTE QUE O SUPORTE � EXPERIMENTAL E PODE TRAVAR O SEU COMPUTADOR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s com acelera��o hardware 3D EXPERIMENTAL"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Seu placa suporta acelera��o hardware 3D mas apenas com o XFree %s,\n"
-"NOTE QUE O SUPORTE � EXPERIMENTAL E PODE TRAVAR O SEU COMPUTADOR.\n"
-"Sua placa � suportada pelo XFree %s que pode ter melhor suporte 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation display driver)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configura��o do XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Selecione o tamanho da mem�ria de sua placa gr�fica"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Escolha as op��es do server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Escolha um monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dois par�metros cr�ticos s�o a taxa de atualiza��o vertical, que � a taxa\n"
-"em que toda a tela � atualizada, e principalmente a taxa de sincroniza��o\n"
-"horizontal, que � a taxa em que scanlines s�o mostradas.\n"
-"\n"
-"� MUITO IMPORTANTE que voc� n�o especifique um tipo de monitor com taxa de "
-"atualiza��\n"
-"que � muito al�m das capacidades do seu monitor: voc� pode danificar seu "
-"monitor.\n"
-" Se tiver d�vida, escolha caracter�sticas conservadoras."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Taxa de atualiza��o horizontal"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Taxa de atualiza��o vertical"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor n�o configurado"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Placa gr�fica ainda n�o configurado"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Resolu��es ainda n�o escolhidas"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Voc� quer testar a configura��o?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Aten��o: testar essa placa gr�fica pode travar o seu computador"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Testar configura��o"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"tente mudar alguns par�metros"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ocorreu um erro:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Saindo em %d segundos"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "� essa a configura��o correta?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ocorreu um erro, tente mudar alguns par�metros"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolu��o"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Escolha a resolu��o e n�mero de cores"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Placa Gr�fica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Mais"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modo Avan�ado"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mostrar tudo"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resolu��es"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Estilo do teclado: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo do Mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo do mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sincroniza��o Horizontal do Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Atualiza��o Vertical do Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Placa Gr�fica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifica��o de Placa Gr�fica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Mem�ria gr�fica: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "N�mero de cores: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolu��o: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Server XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Driver XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Preparando configura��o X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "O que voc� quer fazer?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Mudar Monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Mudar Placa Gr�fica"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Mudar op��es do Server"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Mudar Resolu��o"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostrar informa��o"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Testar de novo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Sair"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Manter altera��es?\n"
-"A configura��o atual �:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ao iniciar"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Eu posso fazer seu computador automaticamento iniciar no X ap�s a\n"
-"a inicializa��o. Voc� gostaria de iniciar o X quando reiniciar?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Favor relogar em %s para ativar as mudan�as"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Favor fazer um log out (sair) e ent�o usar as teclas Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 cores (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil cores (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil cores (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milh�es de cores (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 bilh�es de cores (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB ou mais"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA Padr�o, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compat�vel com 8514, 1024x768 a 87 Hz entrela�ado (sem 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrela�ado, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA Extendido, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA N�o-entrela�ado, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA de Alta Frequ�ncia, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequ�ncia que pode fazer 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequ�ncia que pode fazer 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequ�ncia que pode fazer 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor que pode fazer 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor que pode fazer 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primeiro setor da parti��o de boot"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primeiro setor do drive (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instala��o do SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Onde voc� quer instalar o gerenciador de inicializa��o?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instala��o do LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO com menu de texto"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO com menu gr�fico"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Inicializa��o pelo DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Principais op��es do gerenciador de inicializa��o"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Gerenciador de inicializa��o a ser usado"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instala��o do gerenciador de inicializa��o"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dispositivo de boot"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (n�o funciona em BIOS antigas)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Modo de V�deo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Tempo antes de entrar na imagem padr�o"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Senha"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Senha (de novo)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Restringir op��es da linha de comando"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "restrito"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Limpar /tmp a cada inicializa��o"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Especifique o tamanho da RAM se necess�rio (%d MB encontrados)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Permitir v�rios perfis"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Dar o tamanha da RAM em Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Op��o ``Restringir op��es da linha de comando'' n�o tem uso sem senha"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Favor tentar novamente"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "As senhas n�o conferem"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Mensagem Inicial"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Delay do firmware aberto"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Tempo de espera do boot do kernel"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Permitir CD Boot?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Permitir OF Boot?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "SO padr�o?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Aqui est�o as entradas diferentes.\n"
-"Voc� pode adicionar mais ou modificar as existentes."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Adicionar"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Pronto"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modificar"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Qual tipo de entrada voc� quer adicionar"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Outros SO (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Outros SO (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Outros SO (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Table"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Unsafe"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "R�tulo"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Default"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Tamanho do Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Sem v�deo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Remover entrada"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "N�o � permitido r�tulo vazio"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Voc� deve especificar uma imagem de kernel"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Voc� deve especificar uma parti��o root"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Esse r�tulo j� est� sendo utilizado"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Interfaces %s %s encontradas"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Voc� tem alguma outra?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Voc� tem alguma interface %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "N�o"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Sim"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ver informa��o do hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalando driver para placa %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(m�dulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Qual driver %s eu deveria tentar?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Em alguns casos, o driver %s precisa de informa��es extra para funcionar\n"
-"corretamente, mas ele normalmente funciona bem sem essas informa��es. Voc�\n"
-"gostaria de especificar op��es extras ou deixar o driver localizar na sua\n"
-"m�quina as informa��es que ele precisa? Ocasionalmente, isso poder� travar\n"
-"o computador, mas n�o deve causar nenhum dano."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Auto detectar"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Especificar op��es"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Agora voc� pode prover as op��es para o m�dulo %s.\n"
-"As op��es est�o no formato ``nome=valor nome2=valor2 ...''\n"
-"Para inst�ncia, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Op��es do m�dulo:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Falha carregando m�dulo %s.\n"
-"Voc� quer tentar novamente com outros par�mentros?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "Acesso a programas X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "Acesso a ferramentas rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "Permitir \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "Acesso a arquivos administrativos"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(j� adicionado %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Essa senha � muito simples"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Favor dar um nome de usu�rio"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"O nome do usu�rio deve conter apenas letras min�sculas, n�meros `-' e `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Esse usu�rio j� foi adicionado"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Adicionar usu�rio"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Entre com o usu�rio\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aceitar usu�rio"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nome real"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nome do usu�rio"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "�cone"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Eu posso configurar o seu computador para automaticamente logar um usu�rio.\n"
-"Se voc� n�o quiser utilisar esta fun��o, clique em \"Cancelar\"."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Escolha o usu�rio:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Escolha o gerenciador de janelas para ele:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Favor escolher o idioma a ser utilizado."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Voc� pode escolher outros idiomas que estar�o dispon�veis ap�s a instala��o"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Tudo"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Permite todos os usu�rios"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personalizada"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Sem compartilhamento"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "O pacote %s precisa ser instalado. Voc� deseja instal�-lo?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Voc� pode exportar usando SAMBA ou NFS. Qual deles voc� quer"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Pacote obrigat�rio %s faltando"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Carregar Userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"O compartilhamento por usu�rio usa o grupo \"fileshare\".\n"
-"Voc� pode usar o userdrake para adicionar um usu�rio neste grupo."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bem-vindo � Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Padr�o"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paran�ico"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Esse n�vel deve ser usado com cuidado. Ele faz o seu sistema mais f�cil de "
-"usar,\n"
-"mas muito sens�vel: ele n�o deve ser usado em uma m�quina conectada a "
-"outros\n"
-"ou � internet. N�o existe acesso por senha."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"As senhas agora est�o ativadas, mas o uso como computador de rede ainda n�o "
-"� recomendado."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Esse � a seguran�a padr�o recomendada para um computador que ser� usado\n"
-"para se conectar � Internet como um cliente. Agora existe checagens de "
-"seguran�a. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Com esse n�vel de seguran�a, o uso desse sistema como um servidor se tornou "
-"poss�vel.\n"
-"A seguran�a agora est� alta o suficiente para usar o sistema como um "
-"servidor\n"
-"que aceita conex�o de muitos clientes. "
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Baseado no n�vel anterior, mas agora o sistema est� totalmente fechado.\n"
-"As caracter�sticas de seguran�a est�o no m�ximo."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Escolha n�vel de seguran�a"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "N�vel de seguran�a"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Use lbsafe para servidores"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Uma livraria que defende contra ataques de buffer overflow e strings de "
-"format"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bem-vindo ao %s, o selecionador de sistema operacional!\n"
-"\n"
-"Escolha um sistema operacional da lista acima ou\n"
-"aguarde %d segundos para entrar no sistema padrao.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bem-vindo ao GRUB o selecionador de sistema operacional!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use as teclas %c e %c para selecionar a entrada que quiser."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pressione entrar para entrar no SO selecionado, 'e' para editar os"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "comandos antes da inicializacao, ou 'c' para linha de comando."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-"A inicializacao da entrada selecionada ocorrera automaticamente em %d "
-"segundos."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "sem espaco suficiente em /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menu Iniciar"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Voc� n�o pode instalar o carregador de boot em uma %s parti��o\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ajuda ainda n�o implementada.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configura��o do estilo de inicializa��o"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Arquivos"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Arquivo/Sai_r"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>R"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Categorizamento NewStyle de Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor Tradicional"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Gtk+ Tradicional"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Executar Aurora na inicializa��o"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Modo lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Modo yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Voc�  est� utilizando o %s como gerenciador de inicializa��o.\n"
-"Clique em Configurar para abrir o auxiliar de configura��o."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configurar"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Modo do sistema"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Executar o sistema X-Window na inicializa��o"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "N�o, eu n�o quero autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Sim, eu quero autologin com esse (usu�rio, desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "n�o foi poss�vek abrir /etc/inittb para leitura: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "N�o posso fazer screenshots antes de particionar"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Screenshots estar�o dispon�veis depois da instala��o em %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Fran�a"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "B�lgica"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Rep�blica Tcheca"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Alemanha"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Gr�cia"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Noruega"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Su�cia"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Holanda"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "It�lia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "�ustria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Estados Unidos"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Favor primeiro fazer um backup de seus dados"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Ler com aten��o!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se voc� planejar usar aboot, lembre-se de deixar espa�o livre (2048 setores "
-"� suficiente)\n"
-"no in�cio do disco"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Erro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Ajudante"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Escolher a��o"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Voc� tem uma grande parti��o fat\n"
-"(normalmente utilizada pelo MicroSoft Dos/Windows.)\n"
-"Eu sugiro voc� a primeiro redimensionar a parti��o\n"
-"(clique nela, depois clique em \"Redimensinar\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Favor clicar em uma parti��o"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalhes"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Vazio"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Outro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipos de sistema de arquivo:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Criar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use ``%s'' ao inv�s"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Deletar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Use ``Desmontar'' primeiro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Ap�s alterar o tipo da parti��o %s, todos os dados desta parti��o ser�o "
-"perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Escolher parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Escolher outra parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Sair"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Mudar para modo expert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Mudar para modo normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Desfazer"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Continuar mesmo assim?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Sair sem salvar"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Sair sem gravar na tabela de parti��o?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Voc� quer salvar as modifica��es /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Auto alocar"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Limpar tudo"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informa��o de discos rigidos"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Todas as parti��es prim�rias est�o sendo usadas"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Eu n�o posso adicionar mais nenhuma parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Para ter mais parti��es, favor deletar uma para poder criar uma parti��o "
-"extendida"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Gravar tabela de parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Restaurar tabela de parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Recuperar tabela de parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Recuperar tabela de parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Auto-montagem da m�dia remov�vel"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Selecione arquivo"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"O backup da tabela de parti��o n�o tem o mesmo tamanho\n"
-"Ainda continuar?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Aviso"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Insira um disquete no drive\n"
-"Todos os dados no disquete ser�o perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Tentando resgatar tabela de parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Mostrar informa��o detalhada"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Ponto de Montagem"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Op��es"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Redimensionar"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Mover"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatar"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montar"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Adicionar ao RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Adicionar ao LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmontar"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Remover do RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Remover do LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modificar RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Usar para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Criar uma nova parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Setor inicial: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Tamanho em MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipo do Sistema de Arquivos: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Ponto de montagem: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Prefer�ncia: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Remove o arquivo de loopback?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Mudar tipo de parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Qual sistema de arquivos voc� quer?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Mudando de ext2 para ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Onde voc� quer montar o arquivo loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Onde voc� quer montar o dispositivo %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"N�o posso desmacar o ponto de montagem enquanto a parti��o for\n"
-"usada para loop back. Remova o loopback primeiro"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Computando limites do sistema de arquivo fat"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Redimensionando"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Esta parti��o n�o � redimension�vel"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Voc� deveria fazer backup de todos os dados desta parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Ap�s redimensionar a partic�o %s, todos os dados da parti��o ser�o perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Escolha o novo tamanho"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Novo tamanho em MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Qual disco voc� quer mover?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Setor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Qual setor voc� quer mover?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Movendo"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Movendo parti��o..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Escolha um RAID existente para adicionar"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novo"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Escolha um LVM existente para adicionar"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Nome LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Essa parti��o n�o pode ser usada para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nome do arquivo loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "D� um nome de arquivo"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Arquivo j� utilizado por outro loopback, escolha outro"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Arquivo j� existe. Utiliz�-lo?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Op��es de montagem"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "V�rios"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "n�vel"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "tamanho do bloco"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Tenha cuidade: essa opera��o � perigosa."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Qual tipo de particionamento?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Desculpe, eu n�o aceitarei criar /boot t�o distante do driver (em um cilindo "
-"> 1024).\n"
-"Ou voc� usa LILO e ele n�o funcionar�, ou voc� n�o usar� LILO e voc� n�o "
-"precisar� de /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"A parti��o que voc� selecionou para adicionar como root (/) � fisicamente "
-"localizada al�m\n"
-"do cilindro 1024 do disco r�gido, e voc� n�o possui uma parti��o /boot.\n"
-"Se voc� quer usar o gerenciador de inicializa��o LILO, n�o esque�a "
-"deadicionar uma parti��o /boot."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Voc� selecionou uma parti��o software RAID como root (/).\n"
-"O gerenciador de inicializa��o n�o consegue acess�-lo sem uma\n"
-"parti��o /boot. Ent�o n�o esque�a de adicion�-la"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "A tabela de parti��o do drive %s est� para ser gravada no disco!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Voc� precisar� reiniciar antes que as modifica��es tenham efeito"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Ap�s formatar a parti��o %s, todos os dados desta parti��o ser�o perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatando"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatando arquivo loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatando parti��o %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Esconder arquivos"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Mover arquivos para nova parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Diret�rio %s j� cont�m alguns dados\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Movendo arquivos para a nova parti��o"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Copiando %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Removing %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Parti��o %s agora chama-se %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra do drive no DOS: %s (apena um palpite)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nome: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Iniciar: setor: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Tamanho: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s setores"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindro %d ao cilindro %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "N�o formatado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback file(s):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Parti��o de inicializa��o padr�o\n"
-"    (para inicializa��o do MS-DOS, n�o para o lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "N�vel %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tamanho do bloco %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nome do arquivo loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"� prov�vel que est� parti��o seja uma\n"
-"parti��o Driver, voc� provavelmente\n"
-"n�o deveria mexer nela.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Essa parti��o especial\n"
-"Bootstrap � para o\n"
-"boot-duplo do seu sistema.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamanho: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindros, %s cabe�as, %s setores\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informa��o: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo da tabela de parti��o: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "no barramento %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Op��es: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Chave criptogr�fica do sistema de arquivos"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Escolha a sua chave criptogr�fica do sistema de arquivos"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Essa chave � muito simples (deve ter ao menos %d caracteres)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "As chaves criptogr�ficas n�o conferem"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Chave criptogr�fica"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Chave criptogr�fica (de novo)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Mudar tipo"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Favor clicar em uma m�dia"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Servidores de busca"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formata��o de %s falhou"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Eu n�o sei como formatar %s no tipo %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck falhou sem c�digo de sa�da %d ou sinal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "erro desmontando %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simples"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Voc� n�o pode usar JFS em parti��es menores que 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Voc� n�o pode usar ReiserFS em parti��es menores que 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Pontos de montagem devem come�ar com uma /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "J� existe uma parti��o no ponto de montagem %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Voc� n�o pode usar um Volume L�givo LVM para o ponto de montagem %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Esse diret�rio deveria permanecer dentro do sistema de arquivo root"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Voc� precisa de um verdadeiro sistema de arquivo (ext2, reiserfs) para esse "
-"ponto de montagem\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Voc� n�o pode usar um sistema de arquivos criptografado como ponto de "
-"montagem %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Sem espa�o livre suficiente para auto-aloca��o"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nada a fazer"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erro abrindo %s para grava��o: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ocorreu um erro - nenhum dispositivo v�lido foi encontrado para criar novos "
-"sistema de arquivos. Favor checar seu hardware para a causa desse problema"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Voc� n�o tem nenhuma parti��o!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux � um sistema multiusu�rio, e isto significa que cada usu�rio pode "
-"ter suas\n"
-"pr�prias prefer�ncias, seus pr�prios arquivos, e assim em diante. Voc� pode "
-"ler o \n"
-"``Guia do Usu�rio'' para aprender mais. Mas, ao contr�rio do \"root\", que � "
-"o administrador \n"
-"do sistema, os usu�rios a serem adicionados n�o ter�o direito a modificar "
-"nada, a n�o \n"
-"ser seus pr�prios arquivos e suas pr�prias configura��es. Voc� dever� criar "
-"ao menos uma conta regular para voc� mesmo. Embora seja muito pr�tico logar "
-"como \"root\" todo \n"
-"dia,  tamb�m pode ser muito perigoso! O menor engano pode significar que o "
-"seu sistema\n"
-"n�o funcionar� mais. Se voc� comete um engano s�rio como usu�rio regular, "
-"voc� \n"
-"somente perde informa��o, e n�o o sistema inteiro.\n"
-"\n"
-"Primeiro voc� deve entrar o seu nome real. Isto n�o � obrigat�rio, � claro "
-"-\n"
-"porque voc� pode entrar, na verdade, o que voc� quiser. DrakX ir�, depois, "
-"pegar a \n"
-"primeira palavra que voc� digitou na caixa e colocar como \"User\n"
-"name\". Este � o nome que este usu�rio espec�fico ir� usar paralogar no "
-"sistema. \n"
-"Voc� pode mud�-lo. Depois voc� dever� entrar uma senha. Uma\n"
-"senha de usu�rio n�o privilegiado (regular) n�o � t�o crucial\n"
-"quanto a de \"root\", do ponto de vista da seguran�a, mas isto n�o � raz�o "
-"para\n"
-"negligenciar esta senha, pois afinal, s�o os seus arquivos que est�o l�.\n"
-"\n"
-"Se voc� clicar em \"Aceitar usu�rio\" voc� poder� depois adicionar quantos "
-"quiser.\n"
-"Adicione um usu�rio para cada um dos seus amigos: seu pai, ou sua irm�o, "
-"por\n"
-"exemplo. Depois que terminar de adicionar os usu�rios, selecione \"Feito\".\n"
-"\n"
-"Clicando em \"Avan�ado\"  permite que voc� mude o  \"shell\"\n"
-"default para aquele usu�rio (bash por default)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Acima est�o listadas as parti��es Linux detectadas no\n"
-"seu disco r�gido. Voc� pode manter as op��es feitas pelo o ajudante, elas "
-"s�o\n"
-"boas para o uso di�rio. Se voc� quiser alterar essas op��es, voc� deve ao\n"
-"menos definir uma parti��o (\"/\"). N�o escolhe uma parti��o muito pequena "
-"ou voc�\n"
-"n�o ser� capaz de instalar software suficiente. Se voc� quiser guardar seus "
-"dados em\n"
-"uma parti��o separada, voc� precisa escolher uma \"/home\" (apenas poss�vel "
-"se voc�\n"
-"tiver mais de uma parti��o Linux dispon�vel).\n"
-"\n"
-"Nota: cada parti��o � listada da seguinte forma: \"Nome\", \"Capacidade\".\n"
-"\n"
-"\n"
-"\"Nome\" � codificado da seguinte maneira: \"tipo do disco r�gido\", "
-"\"n�mero\n"
-"do disco r�gido\", \"n�mero da parti��o\" (por exemplo, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipo do disco r�gido\" � \"hd\" se seu disco r�gido for IDE e \"sd\"\n"
-"se ele for um disco r�gido SCSI.\n"
-"\n"
-"\n"
-"\"N�mero do disco r�gido\" � sempre uma letra depois de \"hd\" ou \"sd\".Com "
-"discos r�gidos IDE:\n"
-"\n"
-"   * \"a\" significa \"disco r�gido mestre na controladora IDE prim�ria\",\n"
-"\n"
-"   * \"b\" significa \"disco r�gido escravo na controladora IDE prim�ria\",\n"
-"\n"
-"   * \"c\" significa \"disco r�gido mestre na controladora IDE secund�ria"
-"\",\n"
-"\n"
-"   * \"d\" significa \"disco r�gido escravo na controladora IDE secund�ria"
-"\",\n"
-"\n"
-"\n"
-"Com discos r�gidos SCSI, um significa \"disco r�gido prim�rio\", um \"b\" "
-"significa \"disco r�gido secund�rio\", etc..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"O instalador do Linux Mandrake est� espalhado em diferentes CD-ROMS. O "
-"DrakX\n"
-"sabe se um pacote selecionado est� localizado em outro CD-ROM e ir� ejetar\n"
-"o CD-ROM atual e pedir para voc� inserir o CD-ROM necess�rio."
-
-#: ../../help.pm_.c:77
-#, fuzzy
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Agora voc� dever� especificar quais programas voc� deseja instalar no seu\n"
-"sistema. Existem milhares de pacotes dispon�veis para o Mandrake Linux, e\n"
-"voc� n�o precisa conhec�-los todos de cabe�a.\n"
-"\n"
-"Se voc� est� fazendo uma instala��o padr�o por CD-ROM, voc� primeiro\n"
-"ser� questionado sobre que CDs voc� tem (somente em modo expert). Confirme\n"
-"os nomes dos CDs e cheque as caixas de di�logo correspondentes aos CDs\n"
-"que voc� tem dispon�veis. Clique \"OK\" quando estiver pronto para "
-"continuar.\n"
-"\n"
-"Os pacotes est�o separados em grupos correspondendo a um uso particular\n"
-"da sua m�quina. Os grupos est�o organizados em quatro sess�es:\n"
-"\n"
-" * \"Workstation\": Se voc� planeja usar sua m�quina como esta��o de "
-"trabalho, selecione\n"
-"um ou mais dos grupos correspondentes.\n"
-"\n"
-" * \"Development\": Se a m�quina ser� usada para programa��o, escolha o\n"
-"grupo desejado(s).\n"
-"\n"
-" * \"Server\":  se a m�quina ser� um servidor, voc� poder� escolher\n"
-"quais dos servi�os mais comuns voc� deseja instalar na\n"
-"m�quina.\n"
-"\n"
-" * \"Graphical Environment\": finalmente, este � onde voc� ir� escolher seu\n"
-"ambiente gr�fico preferido. Pelo menos um tem que ser selecionado, se voc� "
-"quer\n"
-"ter uma esta��o de trabalho gr�fica!\n"
-"\n"
-"Movendo o mouse em cima de um nome de grupo ir� mostrar uma pequena "
-"explica��o\n"
-"sobre o grupo. Se voc� n�o selecionar nenhum grupo enquanto faz\n"
-"uma instala��o regular (em oposi��o a um upgrade); um di�logo ir� aparecer\n"
-"propondo um tipo diferente de instala��o m�nima:\n"
-"\n"
-" * Ir� instalar o m�nimo necess�rio para ter um sistema linux rodando,\n"
-"em linha de comando somente.\n"
-"\n"
-" * Instalar o sistema b�sico e mais os aplicativos b�sicos\n"
-"\n"
-" * Instalar os pacotes m�nimos necess�rios para ter um ambiente gr�fico\n"
-"\n"
-"Voc� pode checar a caixa \"Selec�o individual de pacotes\", que � �til se\n"
-"voc� est� familiarizado com os pacotes sendo oferecidos ou se voc� deseja\n"
-"ter total controle sobre o que ser� instalado.\n"
-"\n"
-"Se voc� come�ou a instala��o em modo \"Upgrade\", voc� pode des-selecionar "
-"todos os\n"
-"grupos para evitar instalar qualquer pacote novo. Isto � �til para reparar "
-"ou atualizar\n"
-"um sistema j� existente."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finalmente, dependendo da sua escolha em selecionar ou n�o pacotes "
-"individuais,\n"
-"voc� ser� levado a uma �rvore contendo todos os pacotes classificados por "
-"grupos\n"
-"e subgrupos. Navegando na �rvoerer, voc� poder� selecionar grupos inteiros, "
-"sub\n"
-"grupos ou pacotes individuais.\n"
-"\n"
-"Quando voc� seleciona um pacote individual na �rvore, uma breve descri��o "
-"aparecer�\n"
-"� direita. Quando a sua sele��o estiver conclu�da, clique \"Install\" , que\n"
-"ir� iniciar a isntala��o. Dependendo da velocidade do seu hardware e do "
-"n�mero\n"
-"de pacotes  a serem instalados, poder� levar algum tempo. Uma estimativa de "
-"tempo\n"
-"necess�rio � mostrada na tela, para ajud�-lo a pensar se h� tempo para uma "
-"x�cara\n"
-"de caf�.\n"
-"\n"
-"!! Se um pacote de servidor foi selecionado, intencionalmente, ou por ser "
-"parte de um\n"
-"grupo, voc� ser� instado a confirmar que realmente deseja estes servidores "
-"instalados.\n"
-"No Mandrake Linux quaisquer servidores instalados ser�o iniciados por "
-"default no boot.\n"
-"Mesmo se eles s�o seguros e n�o possuem quaisquer d�vidas a respeito quando "
-"da\n"
-"distribui��o do pacote, � poss�vel que brechas de seguran�a hajam sido "
-"descobertas\n"
-"depois que esta vers�o do Mandrake Linux foi conclu�da. Se voc� n�o sabe o "
-"que um\n"
-"certo servi�o faz, ou porque est� sendo instalado, clique em \"No\". "
-"Clicando em  \"Yes\"\n"
-"ir� automaticamente instalar os servi�os listados e eles ser�o iniciados "
-"automaticamente\n"
-"por default.\n"
-"\n"
-"A op��o \"Depend�ncias autom�ticas\" simplesmente desabilita a caixa de "
-"di�logo\n"
-"de aviso que aparece quando o instalador automaticamente seleciona um "
-"pacote. Isto\n"
-"ocorre porque ele determina que � necess�rio satisfazer uma depend�ncia com "
-"outro\n"
-"pacote para completar a instala��o corretamente.\n"
-"\n"
-"O pequeno �cone de disco floppy no fim da lista permite carregar uma lista "
-"de pacotes\n"
-"escolhidos durante uma instala��o pr�via. Clicando neste �cone voc� poder� "
-"inserir\n"
-"um disco remov�vel criado previamente no fim de uma instala��o. Veja a "
-"segunda dica\n"
-"do �ltimo passo para criar um floppy assim."
-
-#: ../../help.pm_.c:164
-#, fuzzy
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Se voc� deseja conectar seu computador � internet, ou a uma rede local,\n"
-"por favor escolha a op��o correta. Por favor, desligue seu dispositivo, "
-"antes de fazer a escolha certa para deixar o DrakX detect�-lo "
-"automaticamente.\n"
-"\n"
-"MandrakeLinux prop�e a configura��o de uma conex�o � internet durante a "
-"instala��o\n"
-"do sistema. As op��es dispon�veis s�o modem tradicional, conex�o ADSL, cable "
-"modem,\n"
-" e finalmente, LAN (Ethernet).\n"
-"\n"
-"Aqui n�s n�o iremos detalhar cada configura��o. Apenas certifique-se de que "
-"voc� tem\n"
-"todas as informa��es de seu Provedor de Internet ou administrador do "
-"sistema.\n"
-"\n"
-"Voc� pode consultar o cap�tulo do manual sobre conex�es de internet para "
-"mais detalhes\n"
-"sobre a conex�o, ou simplesmente esperar at� que o sistema esteja instalado "
-"e usar o\n"
-"programa descrito para configurar sua conex�o.\n"
-"\n"
-"Se voc� deseja configurar a rede mais tarde, depois da instala��o ou se voc� "
-"terminou\n"
-"de configurar sua conex�o de rede, clique \"Cancelar\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Voc� agora pode escolher quais servi�os voc� quer que iniciem na hora da "
-"inicializa��o.\n"
-"\n"
-"Aqui estar�o todos os servi�os dispon�veis na instala��o atual. Reveja "
-"cuidadosamente e desabilite aqueles que n�o s�a sempre necess�rios durante a "
-"inicializa��o.\n"
-"\n"
-"Quando voc� colocar o mouse sobre um item, um pequeno bal�o de ajuda\n"
-"aparecer� descrevendo a fun��o do servi�o. Quando voc� n�o tiver certeza se "
-"um \n"
-"servi�o � �til ou n�o, � seguro manter o comportamento default.\n"
-"\n"
-"Tenha muito cuidado nesse passo, pois se voc� pretende usar sua m�quina como "
-"um servidor:\n"
-"voc� provavelmente vai querer que servi�os indesejados n�o sejam iniciados.\n"
-"Favor lembrar que v�rios servi�os podem ser perigosos se foram habilitados "
-"em um\n"
-"servidor. Em geral, selecione apenas os servi�os que voc� realmente precisa."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"O GNU/Linux gerencia o tempo em GMT (Tempo M�dio de Grenwich) e traduz\n"
-"em tempo local de acordo com o fuso hor�rio que voc� escolheu. Contudo, � "
-"poss�vel \n"
-"desativ�-lo, deselecionando \"Rel�gio do hardware configurado para GMT\", de "
-"forma que \n"
-"o rel�gio do hardware seja o mesmo do rel�gio do sistema. Isto � �til quando "
-"a m�quina \n"
-"est� abrigando outro sistema operacional, como o Windows.\n"
-"\n"
-"A op��o \"Sincroniza��o Autom�tica de Tempo\" ir� automaticamente regular o "
-"rel�gio\n"
-"conectando-o a um servidor remoto de tempo na internet. Na lista "
-"apresentada\n"
-"escolha um servidor perto de voc�. Obviamente, voc� deve dispor de uma "
-"conex�o\n"
-" com a internet para isso."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"O X (o sistema X window) � o cora��o da interface gr�fica GNU/Linux\n"
-"na qual todos os ambientes gr�ficos (KDE, Gnome, AfterStep, WindowMaker...)\n"
-"acoplados ao Mandrake Linux se baseiam. Nesta se��o, o DrakX\n"
-"tentar� configurar o sistema X automaticamente.\n"
-"\n"
-"� muito raro este processo falhar, o que pode ocorrer se o hardware for "
-"muito velho\n"
-"(ou muito novo). Se tudo correr bem, ele iniciar� o X automaticamente com a "
-"melhor\n"
-"resolu��o poss�vel, dependendo do tamanho do monitor. Uma janela aparecer� \n"
-"e perguntar� se voc� pode v�-la.\n"
-"\n"
-"Se voc� estiver usando a instala��o em modo \"Expert\", voc� dever� entrar "
-"no \n"
-"assistente de configura��o X. Veja a se��o correspondente do manual para "
-"mais \n"
-"informa��es sobre este assistente.\n"
-"\n"
-"Se voc� conseguir ver a mensagem e responder \"Sim\", ent�o o DrakX seguir� "
-"para\n"
-"o pr�ximo passo. Se voc� n�o conseguir ver a mensagem, significa que a "
-"configura��o\n"
-"estava errada, e o teste ir� automaticamente terminar em 10 segundos, "
-"restaurando\n"
-"a tela."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Na primeira vez que voc� usar o sistema X, voc� pode n�o ficar muito\n"
-"satisfeito com a imagem (tela muito pequena, errada no sentido esquerdo -"
-"direito...).\n"
-"Por�m, mesmo se o X come�ar corretamente, o DrakX ir� perguntar se a "
-"configura��o\n"
-"o agrada. Ir� tamb�m prop�r modifica��es, mostrando uma lista de "
-"alternativas, pedindo \n"
-"a voc� para escolher uma.\n"
-"\n"
-"Como �ltimo recurso, se voc� ainda n�o conseguir fazer o X funcionar,, "
-"escolha\n"
-"\"Mudar placa de v�deo\", selecione \"Placas n�o listadas\", e quando "
-"perguntado em qual \n"
-"servidor voc� deseja, escolha \"FBDev\". � uma op��o � prova de erros, que "
-"funciona\n"
-"com qualquer placa de v�deo moderna. Depois escolha \"Testar de novo\" para "
-"se certificar."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"finalmente, voc� ser� perguntado se deseja ver a interface gr�fica durante a "
-"inicializa��o.\n"
-"Repare que esta op��o ser� apresentada mesmo se voc� escolher n�o testar a \n"
-"configura��o. Obviamente, voc� dever� responder \"N�o\" se a sua m�quina ir� "
-"funcionar\n"
-"como um servidor, ou se voc� n�o conseguiu configurar o display."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"O CDROM Mandrake Linux possui um modo de resgate embutido. Voc� pode ter "
-"acesso\n"
-"a ele iniciando sua m�quina pelo CDROM, apertando >>F1<< durante o boot e "
-"digitando\n"
-">>rescue<< no prompt. No caso de o seu computador n�o iniciar pelo CDROM, "
-"voc�\n"
-"dever� voltar a este passo em pelo menos duas situa��es:\n"
-"\n"
-" *quando instalando o boot loader, DrakX ir� reescrever o setor de boot "
-"(MBR)\n"
-"do seu disco r�gido principal (n�o se voc� estiver usando outro gerenciador "
-"de boot)\n"
-"para que voc� poassa iniciar com o Windows ou com o GNU/Linux (assumindo "
-"que\n"
-"voc� tem Windows no seu sistema). Se voc� precisar reinstalar o Windows, o "
-"instalador\n"
-"da Microsoft ir� reescrever o setor de boot, e voc� n�o poder� iniciar o GNU/"
-"Linux!\n"
-"\n"
-" *se aparecer um problema, e voc� n�o puder iniciar o GNU/Linux do disco "
-"r�gido,\n"
-"este floppy ser� o �nico meio de restaurar e iniciar o GNU/Linux. Ele cont�m "
-"uma \n"
-"s�rie de feramentas para reparar e restaurar o sistema, que pode ter parado "
-"por falta de \n"
-"energia, ou algum erro de digita��o, erro de senha, ou qualquer outro "
-"motivo.\n"
-"\n"
-"Quando voc� clica nesta etapa, voc� ser� instado a inserir um disco no drive "
-"de floppy.\n"
-"O disco que voc� inserir dever� estar vazio ou conter dados que voc� n�o "
-"precisa.\n"
-"Voc� n�o precisar� reformat�-lo, porque o DrakX ir� reescrever o disco "
-"inteiro."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"A esse ponto, voc� precisa escolher onde voc� quer instalar o seu sistema\n"
-"Mandrake Linux no seu disco r�gido. Se estiver vazio ou se um sistema\n"
-"operacional existente usa todo o espa�o dispon�vel, voc� ter� que\n"
-"particion�-lo. Basicamente, particionar um disco r�gido consiste em\n"
-"divid�-lo logicamente para criar espa�o para o seu novo sistema Mandrake "
-"Linux.\n"
-"\n"
-"Como os efeitos de um processo de particionamento s�o normalmente\n"
-"irrevers�veis, o particionamento pode ser intimidante e estressante se\n"
-"voc� for um usu�rio inexperiente.\n"
-"Esse ajudante simplifica o procceso. Antes de come�ar, favor consultar o "
-"manual\n"
-"e n�o se apressar.\n"
-"\n"
-"\n"
-"Voc� precisa de no m�nimo duas parti��es. Uma para o sistema opercional em e "
-"a\n"
-"outra para a mem�ria virtual (tamb�m chamada de Swap).\n"
-"\n"
-"\n"
-"Se as parti��es j� tiverem sido definidas (por uma instala��o pr�via ou "
-"atrav�s\n"
-"de outra ferramenta particionadora), voc� precisa apenas escolher aquelas a "
-"usar\n"
-"para instalar o seu sistema Linux.\n"
-"\n"
-"\n"
-"Se as parti��es n�o tiverem sido definidas ainda, voc� precisa cri�-las.\n"
-"Para fazer isso, use o ajudante dispon�vel acima. Dependendo da\n"
-"configura��o do seu disco r�gido, v�rias solu��es podem estar dispon�veis:\n"
-"\n"
-"* Usar parti��o existente: o ajudante detectado uma ous mais parti��es Linux "
-"j� existentes no seu disco r�gido. Se\n"
-"  voc� quiser mant�-las, escolha essa op��o. \n"
-"\n"
-"\n"
-"* Apagar todo o disco: se voc� quiser deletar todos os dados e todas as "
-"parti��es existentes no disco r�gidos e substitu�-las pelo seu novo sistema "
-"Mandrake Linux, voc� pode escolher essa op��o. Tenha cuidado com essa "
-"op��o,\n"
-"  voc� n�o pode reverter sua escolha ap�s a confirma��o.\n"
-"\n"
-"\n"
-"* Usar o espa�o livre na parti��o Windows: se o Microsoft Windows estiver "
-"instalado no seu disco r�gido e tomar\n"
-"  todo o espa�o dispon�vel, voc� tem que criar espa�o livre para o Linux. "
-"Para fazer isso, voc� pode deletar a sua\n"
-"  parti��o Microsoft Windows e dados (ver \"Apagar todo o disco\" ou "
-"solu��es \"Modo Expert\") ou redimensionar\n"
-"  a sua parti��o Microsoft Windows. O redimensionamento pode ser feito sem a "
-"perda de dados. Essa solu��o �\n"
-"  recomendada se voc� quiser usar o Mandrake Linux e o Microsoft Windows no "
-"mesmo computador.\n"
-"\n"
-"\n"
-"  Antes de escolher essa solu��o, favor entender que o tamanho de sua "
-"parti��o\n"
-"  Microsoft Windows ser� menor do que agora. Isso significa que voc� ir�\n"
-"ter menos espa�o livre no Microsoft\n"
-"  Windows para guardar os seus dados ou instalar novos programas.\n"
-"\n"
-"\n"
-"* Modo Expert: se voc� quiser particionar manualmente o seu disco r�gido, "
-"escolha essa op��o. Tenha cuidado\n"
-"  antes de escolhe-la. Ela � muito poderosa, mas muito perigosa. Voc� pode "
-"perder todos os seus dados\n"
-"  facilmente. Ent�o n�o escolha essa solu��o a n�o ser que saiba o que faz."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Aqui estamos, a instala��o agora est� completa e o seu GNU/Linux est� "
-"pronto\n"
-"para usar. Clique em  \"OK\"para reiniciar o sistema. Voc� pode iniciar o "
-"GNU/Linux \n"
-"ou o Windows, o que voc� preferir (se estiver em dual-boot), assim que o "
-"computador\n"
-"tiver reiniciado.\n"
-"\n"
-"O bot�o \"Avan�ado\" (em modo expert) mostra mais dois bot�es:\n"
-"\n"
-" * \"gerar disco de autoinstala��o\": para criar um disco de instala��o que "
-"ir�\n"
-"automaticamente fazer uma instala��o completa sem a ajuda de um operador,\n"
-"semelhante � instala��o que voc� acabou de fazer.\n"
-"\n"
-"   Note que duas op��es diferentes est�o dispon�veis depois de clicar o "
-"bot�o:\n"
-"\n"
-"   * \"Replay\". � uma instala��o parcialmente autom�tica, porque a se��o "
-"de\n"
-"particionamento (somente esta) permanece interativa.\n"
-"\n"
-"    * \"Automatizada\". Completamente automatizada: o disco r�gido � "
-"completamente \n"
-"reescrito, e todos os dados anteriores s�o perdidos.\n"
-"\n"
-"   Esta funcionalidade � muito adequada quando se deseja instalar o sistema\n"
-"em um grande n�mero de m�quinas semelhantes. Veja a se��o de autoinstala��o\n"
-"do nosso website.  * \"Save packages selection\"(*) : salva a sele��o de "
-"pacotes como feita anteriormente.\n"
-"Depois, quando fizer outra instala��o, insira o floppy no drive e rode a "
-"instala��o, indo\n"
-"para a tela de ajuda pela tecla F1 e escolhendo >>linux defcfg=\"floppy"
-"\"<<.\n"
-"\n"
-"(*) Voc� necessitar� de um disco floppy formatado em FAT (para criar um no "
-"GNU/Linux\n"
-"digite \"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Qualquer parti��o que acabou de ser criada deve ser\n"
-"formatada para o uso (formatar significa criar um sistema de arquivos).\n"
-"\n"
-"Agora, voc� pode reformatar algumas parti��es existentes para apagar os "
-"dados\n"
-"contidos nelas. Se voc� deseja fazer isso, favor tamb�m selecionar quais\n"
-"parti��es voc� deseja formatar\n"
-"\n"
-"Favor notar que n�o � necess�rio reformatar todas as parti��es j� "
-"existentes.\n"
-"Voc� deve reformatar as parti��es contendo o sistema operacional (tal como\n"
-"\"/\",\"/usr\" ou \"/var\"), mas voc� n�o tem que reformatar as parti��es "
-"contendo\n"
-"dados que voc� deseja manter (normalmente /home).\n"
-"\n"
-"Favor tenha cuidado ao selecionar as parti��es, ap�s format�-las,\n"
-"todos os dados ser�o apagados e n�o pode ser recuperados.\n"
-"\n"
-"Cliquem em \"OK\" quando estiver pronto para formatar as parti��es.\n"
-"\n"
-"Clique em \"Cancelar\" se voc� desejar escolher outras parti��es para "
-"instalar\n"
-"o seu novo sistema operacional Mandrake Linux."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Seu novo sistema operacional Mandrake Linux est� sendo instalado\n"
-"Essa opera��o deve demorar algumas minutos (isso depende do tamanho que\n"
-"voc� escolheu para instalar e a velocidade do seu computador).\n"
-"\n"
-"Por favor seja paciente."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Antes de continuar voc� deve ler com aten��o os termos da Licensa. Ela "
-"cobre\n"
-"o Mandrake Linux inteiro, e se voc� n�o concorda com todos os termos, clique "
-"no \n"
-"bot�o \"Recusar\" que ir� imediatamente sair da instala��o. Para continuar "
-"na instala��o,\n"
-"clique em \"Aceitar\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Neste ponto � necess�rio escolher o n�vel de seguran�a desejado para a "
-"m�quina.\n"
-"Via de regra, quanto mais exposta a m�quina est�, e quanto mais dados "
-"cruciais est�o\n"
-"guardados nela, maior deve ser o n�vel de seguran�a. Contudo, os n�veis mais "
-"altos de \n"
-"seguran�a s�o obtidos �s expensas da facilidade de uso. Consulte o cap�tulo "
-"MSEC\n"
-" do ``Manual de Refer�ncia''  para conseguir mais informa��es sobre o "
-"significado destes\n"
-"n�veis de seguran�a.\n"
-"\n"
-"Se voc� n�o souber o que escolher, siga os defaults."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Agora voc� precisa escolher qual(is)\n"
-"parti��o(�es) utilizar para instalar o seu novo sistema Mandrake Linux. Se "
-"asparti��es\n"
-"j� estiverem definidas (atrav�s de uma instala��o anterior do GNU/Linux ou "
-"outra\n"
-"ferramenta particionadora), voc� pode utiliz�-las. Caso contr�rio, as\n"
-"parti��es devem ser definidas.\n"
-"\n"
-"Para criar parti��es, voc� deve primeiro selecionar um disco r�gido. Voc�\n"
-"pode selecionar o disco clicando em \"hda\" para o primeiro drive IDE,\"hdb"
-"\" para\n"
-"o segundo ou \"sda\" para o primeiro drive SCSI e assim por diante.\n"
-"\n"
-"Para particionar o disco selecionado, voc� pode usar as seguintes op��es:\n"
-"\n"
-"   * Limpar tudo: essa op��o deletar� todas as parti��es dispon�veis do "
-"disco r�gido selecionado.\n"
-"\n"
-"   * Auto alocar: essa op��o lhe permite criar automaticamente parti��es "
-"Ext2 e swap no espa�o livre do seu\n"
-"     disco r�gido.\n"
-"\n"
-"   * Resgatar tabela de parti��o: se sua tabela de parti��o estiver "
-"danificada, voc� pode tentar recuper�-la usando\n"
-"     essa op��o. Tenha cuidado e lembre-se que ela pode falhar.\n"
-"\n"
-"   * Desfazer: voc� pode usar essa op��o para cancelar suas altera��es.\n"
-"\n"
-"   * Recarregar: voc� pode usar essa op��o se voc� desejar desfazer todas as "
-"suas altera��es e recome�ar de novo\n"
-"\n"
-"   * Ajudante: se voc� desejar utilizar um ajudante para particionar o seu "
-"disco r�gido, voc� pode usar essa op��o.\n"
-"     � recomendada caso n�o tenha conhecimento sobre particionamento.\n"
-"\n"
-"   * Restaurar do disquete: se voc� salvou a sua tabela da parti��o em um "
-"disquete em um instala��o anterior, voc�\n"
-"     pode recuper�-la com essa op��o.\n"
-"\n"
-"   * Salvar em disquete: se voc� quiser salvar sua tabela de parti��o em um "
-"disquete para pode recuper�-la,\n"
-"     voc� pode usar essa op��o. � altamente recomendado utiliz�-la.\n"
-"\n"
-"   * Salvar: quando voc� terminar de particionar o seu disco r�gido, use "
-"essa op��o para salvar as altera��es.\n"
-"\n"
-"Nota: voc� pode utilizar qualquer op��o usando o teclado: navegue entre as "
-"parti��es usando Tab e as setas para cima/baixo.\n"
-"\n"
-"Quando a parti�� estiver selecionada, voc� pode usar:\n"
-"\n"
-"           * Ctrl-c para criar uma nova parti��o (quando uma vazia estiver "
-"selecionada)\n"
-"           * Ctrl-d para deletar uma parti��o\n"
-"\n"
-"           * Ctrl-m para especificar um ponto de montagemSe voc� est� "
-"instalando em uma M�quina PPC, voc� vai querer criar uma pequena parti��o "
-"'bootstrap' HFS de ao menos 1MB para\n"
-"usar com o gerenciador de boot yaboot. Se voc� quiser criar uma parti��o um "
-"pouco maior, digamos 50MB, voc� pode usar o espa�o \n"
-"para guardar um kernel extra e uma imagem ramdisk para emerg�ncias."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mais de uma parti��o Microsoft Windows foi detectada\n"
-"em seu disco r�gido. Favor escolher a que voc� quer redimensionar para\n"
-"instalar o seu novo sistema operacional Mandrake Linux.\n"
-"\n"
-"Nota: cada parti��o � listada da seguinte forma: \"Nome Linux\", \"Nome\n"
-"Windows\" \"Capacidade\".\n"
-"\n"
-"\"Nome Linux\" � codificado da seguinte maneira: \"tipo do disco r�gido\", "
-"\"n�mero do disco r�gido\", \"n�mero da parti��o\" (por exemplo, \"hda1\").\n"
-"\n"
-"\"Tipo do disco r�gido\" � \"hd\" se seu disco r�gido for IDE e \"sd\"\n"
-"se ele for um disco r�gido SCSI.\n"
-"\n"
-"\"N�mero do disco r�gido\" � sempre uma letra depois de \"hd\" ou \"sd\".Com "
-"discos r�gidos IDE:\n"
-"\n"
-"   * \"a\" significa \"disco r�gido mestre na controladora IDE prim�ria\",\n"
-"\n"
-"   * \"b\" significa \"disco r�gido escravo na controladora IDE prim�ria\",\n"
-"\n"
-"   * \"c\" significa \"disco r�gido mestre na controladora IDE secund�ria"
-"\", \n"
-"   * \"d\" significa \"disco r�gido escravo na controladora IDE secund�ria"
-"\". \n"
-"\n"
-"Com discos r�gidos SCSI, um significa \"disco r�gido prim�rio\", um \"b\" "
-"significa \"disco r�gido secund�rio\", etc...\n"
-"\n"
-"\"Nome Windows\" � a letra do seu disco r�gido no Windows (o primeirodisco\n"
-"ou parti��o � chamado \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Por favor seja paciente. Essa opera��o pode demorar v�rios minutos."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"dRakX agora precisa saber se voc� deseja fazer uma isntala��o default\n"
-" (\"recomendada\") ou se voc� deseja ter maior controle sobre o processo "
-"(\"expert\").\n"
-"Voc� tamb�m tem a escolha de fazer uma nova instala��o ou uma atualiza��o "
-"de\n"
-"um sistema MandrakeLinux existente antes.\n"
-"\n"
-" * \"Instalar\" Limpa completamente o sistema antigo. Na verdade, dependendo "
-"do\n"
-"que existia antes, voc� ainda pode conseguir manter parti��es antigas sem\n"
-"modifica��es.\n"
-"\n"
-" * \"Atualiza��o\" Esta classe de instala��o permite simpelsmente atualizar "
-"os\n"
-"pacotes instalados no seu sistema MandrakeLinux. Ele mant�m as atuais "
-"parti��es\n"
-"e os arquivos de usu�rio. Todos os outros passos da isntala��o continuam "
-"dispon�veis\n"
-"em compara��o com a instala��o prim�ria.\n"
-"\n"
-" * \"Somente autaliza��o de pacotes\" Esta nova classe de instala��o "
-"permite\n"
-"atualizar um sistema Mandrake Linux existente mantendo todas as "
-"configura��es do\n"
-"sistema intocadas. Adicionar novos pacotes � instala��o atual tamb�m � "
-"poss�vel.\n"
-"\n"
-"Dependendo do seu conhecimento do GNU/Linux, selecione uma das seguintes\n"
-"op��es:  * Recomendada: escolha esta se voc� nunca instalou um sistema "
-"operacional\n"
-"GNU/Linux antes. A instala��o ser� bem simples e voc� s� ter� que "
-"responder \n"
-"umas poucas perguntas.\n"
-"\n"
-"* Expert: se voc� tem um bom conhecimento sobre o GNU/Linux, voc� pode "
-"escolher essa classe. Como em \n"
-"  na classe \"Personalizado\", voc� poder� escolher o uso prim�rio(esta��o, "
-"servidor, desenvolvimento)\n"
-"  Tenha muito cuidado antes de escolher essa classe. Voc� poder� fazer uma "
-"instala��o bastante personalizada.\n"
-"  Responda a algumas quest�es que podem ser bem dif�ceis se voc� n�o tiver "
-"conhecimento sobre GNU/Linux.\n"
-"Ent�o, s� escolha essa classe se souber o que est� fazendo."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalmente o DrakX esoclhe o teclado certo para voc�, (dependendo da "
-"linguagem\n"
-"qe voc� escolheu) e voc� nem ver� este passo. Contudo, voc� pode possuir um "
-"teclado\n"
-"que n�o corresponde � linguagem que voc� escolheu: se voc� for um su��o, "
-"por�m falante\n"
-"de ingl�s, voc� pode preferir continuar tendo um teclado su��o. Ou se voc� "
-"fala ingl�s mas\n"
-"mora no Quebec, voc� pode estar na mesma situa��o. Em ambos os casos, voc� "
-"dever� \n"
-"voltar a este passo na instala��o e escolher o teclado apropriado da lista.\n"
-"\n"
-"Clique em \"Mais\" para ver uma lista completa de teclados dispon�veis."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Por favor, escolha a sua l�ngua preferida para a instala��o e uso do "
-"sistema.\n"
-"\n"
-"Clicando em \"Avan�ado\" voc� poder� selecionar outras l�nguas para serem "
-"instaladas\n"
-"no seu sistema. Selecionar outras l�nguas ir� tamb�m instalar os arquivos "
-"espec�ficos\n"
-"para documenta��o e aplicativos. Por exemplo, se voc� pretende hospedar "
-"usu�rios\n"
-"espanh�is na sua m�quina, selecione Ingl�s como l�ngua principal na �rvore "
-"de\n"
-" viisualiza��o e na se��o avan�ada clique na estrela cinza correspondente a "
-"\"Espanhol|\n"
-"Espanha\".\n"
-"\n"
-"Note que m�ltiplas l�nguas podem ser instaladas. Uma vez que voc� "
-"selecionou \n"
-"quaisquer adicionais, clique em \"OK\" para continuar."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Por default, o DrakX assume que voc� tem um mouse de dois bot�es, e ir� set�-"
-"lo para\n"
-"emula��o do terceiro bot�o. O DrakX saber� automaticamente se � PS/2, serial "
-"ou USB.\n"
-"\n"
-"Se voc� deseja especificar um tipo diferente de mouse, selecione o tipo da "
-"lista\n"
-"\n"
-"Se voc� escolher um mouse diferente do default voc� ser� apresentado a uma "
-"tela de teste de mouse.\n"
-"Use os bot�es e a roda para verificar se as configura��es est�o boas. Se o "
-"mouse \n"
-"n�o estiver funcionando bem, pressione a barra de espa�o ou RETORNO para "
-"\"Cancelar\"\n"
-"e escolher de novo."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Favor selecionar a porta correta. Por exemplo, a porta COM1\n"
-"no MS Windows � chamada ttyS0 no GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Esta � a principal op��o para a seguran�a do seu sistema GNU/Linux: voc�\n"
-"dever� digitar a senha de \"root\". \"root\" � o administrador do sistema, e "
-"� o �nico\n"
-"autorizado a fazer atualiza��es, adicionar usu�rios e mudar configura��es "
-"gerais\n"
-"do computador. Em suma: \"root\" pode tudo! Por isso voc� deve escolher uma "
-"senha\n"
-"dic�fil de adivinhar - o DrakX ir� avis�-lo se for muito f�cil. Voc� pode "
-"tamb�m escolher\n"
-"n�o entrar uma senha, mas n�s desaconselhamos fortemente esta op��o. N�o "
-"pense que\n"
-"por ter inicado o computador em GNU/Linux voc� est� a salvo de problemas. "
-"\"root\"\n"
-"pode contornar todas as limita��es do sistema e desavisadamente apagar "
-"todos\n"
-"os dados de uma parti��o, por exemplo. � muito importante que a senha de "
-"\"root\"\n"
-"seja dif�cil.\n"
-"\n"
-"A senha deve ser um mistura de caracteres alfanum�ricos de pelo menos 8 "
-"caracteres\n"
-"de extens�o. Nunca escreva a senha \"root\" num papel - isso torna o sistema "
-"vulner�vel.\n"
-"\n"
-"Por�m, n�o fa�a tamb�m uma senha muito complicada e longa, porque voc� "
-"deve \n"
-"ser capaz de relembr�-la sem muito esfor�o.\n"
-"\n"
-"Asenha n�o ser� mostrada na tela enquanto voc� digita. Portanto voc� dever� "
-"digitar a \n"
-"senha duas vezes para reduzir a chance de erro. Se ocorrer de voc� digitar o "
-"mesmo \n"
-"erro duas vezes, voc� dever� fazer o primeiro login no sistema com esta "
-"senha \"errada\".\n"
-"\n"
-"Em mod expert voc� ser� questionado se se conectar� a um servidor de\n"
-" autentica��o, como NIS ou LDAP.\n"
-"\n"
-"Se sua rede usa o protocolo LDAP (ou NIS) selecione \"LDAP\" (ou \"NIS\") "
-"como\n"
-"autentica��o. Se voc� n�o sabe, pergunte ao seu administrador de rede.\n"
-"\n"
-"Se seu computador n�o est� conectado a uma rede administrada, voc� dever�\n"
-"esoclher \"Local Files\" para autentica��o."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"O LILO e o Grub s�o gerenciadores de inicia��o do GNU/Linux. Este est�gio "
-"via de regra\n"
-"� totalmente automatizado. De fato, o DrakX analisa o setor de boot do disco "
-"r�gido e\n"
-"age de acordo com o que encontra ali.:\n"
-"\n"
-" * Se um setor de boot windows � encontrado, ele substitui com um setor de "
-"boot\n"
-"LILO ou Grub. Portanto, voc� poder� iniciar o GNU/Linux ou outro sistema "
-"operacional;\n"
-"\n"
-" * Se um setor LILO ou Grub � encontrado, ele ser� substitu�do por outro "
-"novo;\n"
-"\n"
-"Em d�vida, o DrakX ir� mostrar um di�logo com v�rias op��es.\n"
-"\n"
-" * \"Gerenciador de inicia��o a ser usado\": voc� tem tr�s escolhas:\n"
-"\n"
-"    *\"GRUB\": se vocv� prefere o GRUB (menu em modo texto).\n"
-"\n"
-"    *\"LILO com menu em modo gr�fico\" se voc� prefere o LILO em modo "
-"gr�fico.\n"
-"\n"
-"    *\"LILO com menu em mod texto\": se voc� prefere o LILO em modo texto.\n"
-"\n"
-" * \"Dispositivo de inicia��o\": Na maioria dos casos voc� n�o ir� mudar o "
-"default\n"
-"(\"/dev/hda\"), mas se voc� preferir, o carregador de inicia��o poder� ser "
-"instalado\n"
-"num segundo disco r�gido (\"dev/hdb\"), ou mesmo num flopy (\"/dev/fd0\").\n"
-"\n"
-" * \"Tempo antes de iniciar o sistema default\": antes de iniciar o "
-"computador, este\n"
-"� o tempo dado ao usuaio para escolher o sistema a ser iniciado.\n"
-"\n"
-"!! Repare que se voc� escolher n�o instalar um gerenciador de inicia��o "
-"(selecionando\n"
-"\"Cancelar\" neste ponto) voc� deve se certificar de que voc� tem um jeito "
-"de iniciar o\n"
-"seu sistema Mandrake Linux! Tamb�m, tenha certeza de que voc� sabe o que "
-"est� \n"
-"fazendo quando mudar qualquer default destes.!!\n"
-"\n"
-"Clicando em \"Avan�ado\" neste di�logo, aparecer�o v�rias op��es "
-"avan�adas, \n"
-"resevadas ao usu�rio experiente.\n"
-"\n"
-"Depois de ter configurado todos os par�metros do gerenciador de inicia��o na "
-"m�quina,\n"
-"voc� ver� as op��es de inicia��o dispon�veis no momento da inicia��o.\n"
-"\n"
-"Se houver outro sistema operacional instalado na m�quina, "
-"ser'automaticamente\n"
-"adicionado ao menu de inicia��o. Portanto voc� poder� depois, ajustar as "
-"op��es \n"
-"existentes. Selecione uma entrada e clique \"Modificar\" para modific�-la ou "
-"remov�-la,\n"
-"\"Adicionar\" cria uma nova entrada, e \"Feito\" vai para o pr�ximo passo da "
-"instala��o."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (o LInux LOader) e Grub s�o gerenciadors de boot: ele s�o capazes de\n"
-"de inicializar tanto no GNU/Linux quanto qualquer outro sistema\n"
-"operacional instalado. Normalmente, esses sistemas s�o detectados e\n"
-"instalados corretamente. Se esse n�o for o caso, voc� pode adicionar\n"
-"entradas manualmente nessa tela. Cuidado ao escolher os par�metros "
-"corretos.\n"
-"\n"
-"\n"
-"Voc� pode tamb�m n�o dar acesso a esses sistemas operacionais para\n"
-"ningu�m, na qual voc� pode deletar as entradas correspondentes. Mas nesse\n"
-"caso, voc� precisar� de um disco de inicializa��o para poder utiliz�-los!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Voc� precisa indicar onde voc� deseja\n"
-"guardar a informa��o necess�ria para inicializar o GNU/Linux.\n"
-"\n"
-"\n"
-"A n�o ser que voc� saiba exatamente o que est� fazendo, escolha \"Primeiro\n"
-"setor do drive (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX tentar� localizar adaptadores PCI SCSI. Se DrakX encontrar\n"
-"um adaptador SCSI e souber qual driver utilizar, ele ser� instalado\n"
-"automaticamente\n"
-"\n"
-"\n"
-"Se voc� n�o possuir adaptadores SCSI, um adaptador ISA SCSI ou PCI SCSI que\n"
-"DrakX n�o reconhece, voc� ser� perguntado se algum adaptador SCSI existe em "
-"seu\n"
-"sistema. Se n�o existir adaptadores, voc� pode clicar em \"N�o\". Se voc� "
-"clicar em\n"
-"\"Sim\", uma lista de drivers aparecer� para que voc� possa escolher o seu\n"
-"adaptador.\n"
-"\n"
-"\n"
-"Se voc� tem que especificar manualmente o seu adaptador, DrakX perguntar� "
-"se\n"
-"voc� quer especificar op��es para ele. Voc� pode deixar que o DrakX examine "
-"o hardware\n"
-"para descobrir as op��es. Isso normalmente funciona bem.\n"
-"\n"
-"\n"
-"Se n�o, voc� precisar� prover as op��es para o driver. Favor olhar o Guia do "
-"Usu�rio\n"
-"(cap�tulo 3, se��o \"Coletando informa��es sobre seu hardware) para dicas "
-"sobre\n"
-"como descobrir essas informa��es na documenta��o do hardware, no Web site\n"
-"do fabricante (se voc� tiver acesso � Internet) ou no Microsoft Windows\n"
-"(se voc� tiv�-lo no seu sistema)."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Voc� pode adicionar entradas adicionais no yaboot, tanto para outros "
-"sistemas operacionais,\n"
-"kernels alternativos, ou imagem de boot de emerg�ncia.\n"
-"\n"
-"\n"
-"Para outros SO - a entrada consiste apenas de um nome e da parti��o root.\n"
-"\n"
-"\n"
-"Para Linux, existem algumas op��es poss�veis: \n"
-"\n"
-"\n"
-"  - Label: Isso � simplesmente o nome que ser� necess�rio pare entrar no "
-"sistema \n"
-"atrav�s do yaboot.\n"
-"\n"
-"\n"
-"  - Image: Isso seria o nome do kernel a ser usado. Tipicamente vmlinux ou "
-"uma\n"
-"varia��o de vmlinux com uma extens�o.\n"
-"\n"
-"\n"
-"  - Root: O dispositivo padr�o ou '/' da sua instala��o Linux.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: No hardware Apple, a op��o append (anexar) � normalmente usada "
-"para\n"
-"auxiliar na inicializando do hardware de v�deo, ou para permitir a emula��o "
-"do bot�o\n"
-"do mouse pelo teclado, devido a falta do segundo e terceiro bot�o no mouse "
-"Apple.\n"
-"A seguir est�o alguns exemplos:\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: Essa op��o pode ser usada tanto para carregar m�dulos adicionais "
-"antes que\n"
-"o dispositivo de boot esteja dispon�vel, ou para carregar uma imagem ramdisk "
-"de emerg�ncia.\n"
-"\n"
-"\n"
-"  - Initrd-size: O tamanho padr�o do ramdisk � 4096 bytes. Se voc� precisar "
-"alocar\n"
-"um ramdisk maior, essa op��o pode ser usada.\n"
-"\n"
-"\n"
-"  - Read-write: Normalmente a parti��o 'root' � inicialmente carregada como "
-"apenas-leitura,\n"
-"para permitir uma checagem do sistema antes de ativ�-lo. Voc� pode modificar "
-"essa op��o aqui.\n"
-"\n"
-"\n"
-"  - NoVideo: Se o hardware de v�deo Apple mostrar ser excepcionalmente "
-"problem�tica, voc� pode\n"
-"selecionar esse op��o para entrar no modo 'semv�deo', com suporte nativo ao "
-"framebuffer.\n"
-"\n"
-"\n"
-"  - Default: Selecione essa entrada como sendo a op��o padr�o Linux, "
-"bastando pressionar\n"
-"ENTER no prompt do yaboot. Essa entrada tamb�m aparecer� marcada com um '*', "
-"se voc�\n"
-"pressionar TAB para ver as op��es de boot."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot � o inicializador para hardware NewWorld MacIntosh. Ele � capaz\n"
-"de inicializar tanto o GNU/Linux, MacOS ou MacOSX, se existente no seu\n"
-"computador. Normalmente, esses outros sistemas operacionais s�o detectados\n"
-"corretamente e instalados. Se esse n�o for o seu caso, voc� pode adicionar\n"
-"entradas manualmente nesta tela. Escolha cuidadosamente os par�metros.\n"
-"\n"
-"\n"
-"A principais op��es do Yaboot s�o:\n"
-"\n"
-"\n"
-"  - Mensagem Inicial: uma pequena mensagem de texto que aparece antes do\n"
-"prompt do boot.\n"
-"\n"
-"\n"
-"  - Dispositivo de boot: Indica onde voc� quer colocar a informa��o "
-"necess�ria \n"
-"para entrar no GNU/Linux. Geralmente, voc� ter� que configurar uma parti��o "
-"bootstrap \n"
-"para manter essa informa��o.\n"
-"\n"
-"\n"
-"   - Tempo de boot do Kernel: esse tempo � similar ao tempo de boot do "
-"LILO.  Ap�s \n"
-"selecionar Linux, voc� ter� 0.1 segundo antes do kernel padr�o ser "
-"selecionado.\n"
-"\n"
-"\n"
-"   - Permitir CD Boot?: Marcar essa op��o lhe permitir� escolher 'C' para CD "
-"no\n"
-"primeiro prompt do boot.\n"
-"\n"
-"\n"
-"   - Permitir OF Boot?: Marcar essa op��o lhe permitir� escolher 'N' para "
-"Firmware\n"
-"Aberto no primeiro prompt de boot.\n"
-"\n"
-"\n"
-"   - SO padr�o: voc� pode selecionar qual SO ser� iniciado por padr�o quando "
-"o tempo \n"
-"do Firmware Aberto expirar."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Escolha o disco r�gido que voc� quer apagar para instalar\n"
-"sua parti��o Mandrake Linux. Tenha cuidado, pois todos os dados existentes "
-"ser�o\n"
-"perdidos e n�o poder�o ser recuperados."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Clique em \"OK\" se voc� quiser apagar todos os\n"
-"dados e parti��o existentes nesse disco r�gido. Tenha cuidado, pois ap�s "
-"clicar\n"
-"em \"OK\", voc� n�o ser� capaz de recuperar os dados/parti��es existentes "
-"nesse\n"
-"disco r�gido, incluindo quaisquer dados do Windows.\n"
-"\n"
-"\n"
-"Clique em \"Cancelar\" para cancelar essa opera��o sem perder qualquer dado\n"
-"e parti��o presente nesse disco r�gido."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Voc� selecionou o(s) seguinte(s) servi�o(s): %s\n"
-"\n"
-"\n"
-"Esses servidores s�o ativados por padr�o. Eles n�o possuem nenhuma falha\n"
-"de seguran�a conhecida, mas pode existir uma nova. Nesse caso, voc� "
-"deveatualiz�-lo\n"
-"o mais cedo poss�vel.\n"
-"\n"
-"\n"
-"Voc� realmente quer instalar esses servidores?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "N�o pode usar broadcast sem dom�nio NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Insira um disquete FAT formatado no drive %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Esse disquete n�o est� formatado como FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para usar a sele��o salva de pacotes, entre na instala��o com ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erro lendo arquivo %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Algum hardware no seu computador precisa de drivers ``propriet�rio'' \n"
-"para funcionar. Voc� pode encontrar informa��es sobre eles em: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Voc� deve ter uma parti��o root.\n"
-"Para isso, crie um parti��o (ou click em uma existen).\n"
-"Ent�o escolha a��o ``Ponto de montagem'' e coloque como `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Voc� tem que ter uma parti��o swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Voc� n�o possui uma parti��o swap\n"
-"\n"
-"Continuar mesmo assim?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Voc� tem que ter uma parti��o swap"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Usar espa�o livre"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Sem espa�o livre suficiente para alocar as novas parti��es"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Use parti��o existindo"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "N�o existe nenhuma tabela de parti��o para usar"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Usar a parti��o Windows para loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Qual parti��o voc� quer usar para o Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Escolha os tamanhos"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Tamanho da parti��o root em MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Tamanho da parti��o swap em MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Usar o espa�o livre da parti��o Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Qual parti��o voc� quer redimensionar?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Computando limites do sistema de arquivo do Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"O redimensionar FAT � incapaz de manipular sua parti��o, \n"
-"o seguinte erro ocorreu: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Sua parti��o Windows est� muito fragmentada, favor rodar primeiro o "
-"``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATEN��O!\n"
-"\n"
-"Drakx precisa agorar redimensionar sua parti��o Windows. Tenha cuidado:\n"
-"essa opera��o � perigosa. Se voc� n�o tiver feito ainda, voc� deve rodar o\n"
-"scandisk no Windows (e opcionalmente rodar o defrag) nesta parti��o,\n"
-"ent�o reiniciar a instala��o. Voc� tamb�m deveria fazer backup de seus\n"
-"dados. Quando tiver certeza, pressione Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Quanto de espa�o voc� quer deixar para o windows em"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "parti��o %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Falha no redimensionamento FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"N�o existem parti��es FAT para redimensionar ou para usar como loopback (ou "
-"n�o existe espa�o suficiente)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Apague disco inteiro"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Remover Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Voc� tem mais de um disco r�gido, em qual deles voc� quer instalar o linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Todas as parti��es que existem e todos os dados ser�o perdidos em disco %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Particionamento de disco personalizada"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Usar fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Voc� pode agorar particionar %s.\n"
-"Quando terminar, n�o esque�a de salvar usando `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Voc� n�o tem espa�o livre na sua parti��o Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Eu n�o achei espa�o para instala��o"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "O particionador DrakX encontrou as solu��es seguintes:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "O particionamento falhou: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Trazendo (acessando) a rede"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Fechando (desconectando) a rede"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Um erro ocorreu, mas eu n�o sei como lidar com ele.\n"
-"Continue a seu pr�prio risco."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Ponto de montagem %s duplicado"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Alguns pacotes importantes n�o foram instalados corretamente.\n"
-"O seu drive de cdrom ou o seu cdrom est� defeituoso.\n"
-"Cheque o cdrom em um computador instalado usando \"rpm -qpl Mandarke/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bem-vindo � %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nenhum drive de disquete dispon�vel"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrando no passo `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Seu sistema est� com poucos recursos. Voc� pode ter algum problema na\n"
-"instala��o do Mandrake Linux. Se isso ocorrer, voc� pode tentar instalar "
-"usando o\n"
-"modo texto. Para isso, aperte `F1' na tela de inicializa��o e escreva `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Classe de Instala��o"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Por favor escolhe uma das seguintes classes de instala��o:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"O tamanho total dos grupos que voc� selecionou � de aproximadamente %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se voc� deseja instalar menos que esse tamanho,\n"
-"selecionar a percentagem de pacotes que voc� quer instalar.\n"
-"\n"
-"Uma baixa percentagem ir� instalar apenas os pacotes mais importantes;\n"
-"uma percentagem de 100%% ir� instalar todos os pacotes selecionados."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Voc� tem espa�o em seu disco para apenas %d%% desses pacotes.\n"
-"\n"
-"Se voc� deseja instalar menos que esse tamanho,\n"
-"selecionar a percentagem de pacotes que voc� quer instalar.\n"
-"Uma baixa percentagem ir� instalar apenas os pacotes mais importantes;\n"
-"uma percentagem de %d%% ir� instalar o m�ximo de pacotes poss�vel."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Voc� ser� capaz de escolhe-los mais precisamente no pr�ximo passo"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentagem de pacotes a serem instalados"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Sele��o de Grupo de Pacotes"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Sele��o individual de pacotes"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tamanho total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pacote defeituoso"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nome: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Vers�o: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamanho: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Import�ncia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Voc� n�o pode selecionar esse pacote pois n�o existe espa�o livre para "
-"instal�-lo"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Os seguintes pacotes ser�o instalados"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Os seguintes pacotes ser�o removidos"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Voc� n�o pode selecionar/deselecionar esse pacote"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Esse � um pacote obrigat�rio, n�o pode ser deselecionado"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Voc� n�o pode deselecionar esse pacote. Ele j� est� instalado"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Esse pacote tem que ser atualizado\n"
-"Tem certeza que voc� quer deselecion�-lo?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Voc� n�o pode deselecionar essa pacote. Ele tem que ser atualizado"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Mostra automaticamente os pacotes selecionados"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalar"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Salvar em disquete"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Salvar sele��o de pacotes"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Sair da instala��o"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Escolha os pacotes que voc� quer instalar"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalando"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Estimando"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tempo restante "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Por favor aguarde, preparando instala��o"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pacotes"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalando pacote %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aceitar"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Recusar"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Mude o seu Cd-Rom!\n"
-"\n"
-"Favor inserir o Cd-Rom rotulado \"%s\" no seu drive e aperte em Ok quando "
-"estiver pronto.\n"
-"Se voc� n�o o tiver, aperte em Cancelar para evitar a instala��o desse Cd-"
-"Rom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Continuar mesmo assim?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Houve um erro ordenando os pacotes:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Houve um erro instalando os pacotes:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ocorreu um erro"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Voc� quer reiniciar a rede"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Contrato de licen�a"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclado"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Favor escolher o layout do seu teclado."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Aqui est� a lista completa de teclados dispon�veis"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Qual classe de instala��o voc� quer?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalar/Atualizar"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Isso � uma instala��o ou atualiza��o?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recomendado"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Atualizar"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Salvar sele��o de pacotes"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Favor escolher o tipo do seu mouse."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Porta do Mouse"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Favor escolher em qual porta serial seu mouse est� conectado."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emula��o dos bot�es"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emula��o dos 2 bot�es"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emula��o dos 3 bot�es"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Configurando cart�es PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Configurando IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "sem parti��es dispon�veis"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Escanenado parti��es para encontrar pontos de montagem"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Escolha os ponto de montagem"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Eu n�o consigo ler sua tabela de parti��o, � muito defeituosa para mim :(\n"
-"Eu posso tentar continuar limpando as parti��es defeituosas (TODOS OS DADOS\n"
-"ser�o perdidos!). A outra solu��o � n�o deixar o DrakX modificar a tabela\n"
-"de partic�o. (o erro � %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"O DiskDrake falhou na leitura da tabela de parti��o.\n"
-"Continue a seu pr�prio risco!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Escolha as parti��es que voc� quer formatar"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Parti��o Root"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Qual a parti��o root (/) do seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Voc� precisa reiniciar para que as modifica��es na tabela de parti��o tenham "
-"efeito"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Escolha as parti��es que voc� quer formatar"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Checar blocos defeituosos?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatando parti��es"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Criando e formatando arquivo %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Sem swap suficiente para completar a instala��o, favor adicionar mais"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Procurando por pacotes dispon�veis"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Procurando pacotes � atualizar"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Seu sistema n�o tem espa�o suficiente para instal��o ou atualiza��o (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "M�nima (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomendada (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaurar do disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaurar do disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Sele��o de Grupo de Pacotes"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Insira um disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Salvar em disquete"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "O tamanho escolhido � maior que o espa�o dispon�vel"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se voc� tiver todos os CDs da lista abaixo, clique em Ok.\n"
-"Se voc� n�o tiver nenhum desses CDs, clique em Cancelar.\n"
-"Se apenas alguns CDs estiverem faltando, desmarque-os, ent�o clique em Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom rotualdo \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Preparando instala��o"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalando pacote %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configura��o p�s-instala��o"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Insira um disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Insira um disquete vazio no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Voc� agora tem a possibilidade de fazer o download de software voltado para "
-"codifica��o (encripta��o).\n"
-"\n"
-"ATEN��O:\n"
-"Devido a v�rios requerimentos requeridos aplicados � esses software e "
-"impostos\n"
-"por v�rias jurisdi��es, o cliente e/ou o usu�rio final desse software deve\n"
-"se assegurar que as leis da sua jurisdi��o lhe permite fazer o download, "
-"armazenar\n"
-"e/ou usar esse software.\n"
-"\n"
-"Al�m disso, o cliente e/ou o usu�rio final deve estar particularmente "
-"prevenido para\n"
-"n�o infringir as leis de sua jurisdi��o. Se o cliente e/ou o usu�rio final\n"
-"n�o respeitar a provis�o dessas leis aplic�veis, ir� lhe(s) ocorrer s�rias\n"
-"san��es.\n"
-"\n"
-"Em nenhum acontecimento ir� a Mandrakesoft ou seu manufaturadores e/ou seu "
-"fornecedor\n"
-"ser respons�vei por danos especiais, indiretos ou acidentais seja, qual for\n"
-"(incluindo, mas n�o limitada � perda de lucros, interrup��o de neg�cios, "
-"perda\n"
-" de informa��o comercial e outras perdas monet�rias, e eventual "
-"endividamento e indeniza��o\n"
-"a ser paga, de acordo com a decis�o da corte) saindo do uso, posse, ou do\n"
-"download isolado desse software, do qual o cliente e/ou o usu�rio final "
-"pode\n"
-"eventualmente ter acesso ap�s ter assinado o acordo presente.\n"
-"\n"
-"\n"
-"Para qualquer pergunta relacionada a esse acordo, favor entrar em contato \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Contactando o mirror (espelho) para pegar a lista de pacotes dispon�veis"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escolha um mirror (espelho) de onde pegar os pacotes"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Contactando o mirror (espelho) para pegar a lista de pacotes dispon�veis"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Qual � o seu fuso hor�rio?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "O seu rel�gio do hardware est� configurado como GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Sevidor CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nenhuma impressora"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Voc� tem alguma outra?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sum�rio"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mouse"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Fuso hor�rio"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Impressora"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Placa ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Placa de som"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Placa de TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Usar NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Impressora local"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Especificar senha do root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Nenhuma senha"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Essa senha � muito simples (deve ter ao menos %d caracteres)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentica��o?"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autentica��o?"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "servidor"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autentica��o NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Dom�nio NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Um disco de inicializa��o prov� uma maneira de dar boot no Linux sem\n"
-"depender de um inicializador normal. Isso � necess�rio se voc� n�o quiser "
-"instalar\n"
-"o SILO no seu sistema, ou se outro sistema operacionar remover o SILO, ou\n"
-"o se\n"
-"SILO n�o funcionar com o seu hardware. Um disco de inicializa��o tamb�m\n"
-"pode\n"
-"ser usado com uma imagem de backup do Mandrake deixando muito mais f�cil\n"
-"recuperar\n"
-"um sistema com danos severos.\n"
-"\n"
-"Se voc� quiser criar um disco de inicializa��o para o seu sistema, insira um "
-"disquete\n"
-"no drive e aperte em \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primeiro drive de disquete"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Segundo drive de disquete"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Pular"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Um disco de inicializa��o prov� uma maneira de entrar no Linux sem depender\n"
-"de um inicializador normal. Isso � necess�rio se voc� n�o quiser instalar o "
-"LILO (ou\n"
-"o grub) no seu sistema, ou se outro sistema operacionar remover o LILO, ou "
-"se o LILO\n"
-"n�o funcionar com o seu hardware. Um disco de inicializa��o tamb�m pode ser "
-"usado com\n"
-"uma imagem de backup do Mandrake, deixando muito mais f�cil recuperar um "
-"sistema\n"
-"com danos severos. Voc� quer criar um disco de inicializa��o?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Desculpe, nenhum drive de disquete dispon�vel"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Escolha o drive de disquete que voc� quer usar para criar o disco de "
-"inicializa��o"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Insira um disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Criando disco de inicializa��o"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Preparando gerenciador de inicializa��o"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Voc� quer usar o aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Erro instalando o aboot, \n"
-"tentar for�ar a instala��o, mesmo que isso destrua a primeira parti��o?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instalar gerenciador de inicializa��o"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"A instala��o do gerenciador de inicializa��o falhou. Ocorreram os seguintes "
-"erros:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Voc� pode precisar mudar seu dispostivo de boot Open Firmware\n"
-" para ativar o gerenciado de boot. Se voc� n�o ver o prompt dele ao\n"
-" reiniciar, segure Command-Option-O-F ao reiniciar e digite:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Ent�o escreva: shut-down\n"
-"No seu pr�ximo boot, voc� deve ver o prompt do gerenciador de boot."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Insira um disquete vazio no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Criando disquete de auto instala��o"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Alguns passos n�o foram completados.\n"
-"\n"
-"Voc� realmente quer sair agora?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-#, fuzzy
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Parab�ns, a instala��o foi completada.\n"
-"Remova a m�dia de inicializa��o e aperte enter para reiniciar.\n"
-"\n"
-"Para informa��es sobre corre��es dispon�veis para essa vers�o do Mandrake "
-"Linux,\n"
-"consulte a Errata dispon�vel em http://www.mandrakelinux.com/.\n"
-"\n"
-"Informa��es sobre a configura��o do sistema est�o dispon�veis no\n"
-"cap�tulo p�s-instala��o do Guia Oficial de Usu�rio Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Criar disquete de auto instala��o"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"A auto instala��o pode ser totalmente automatizada se\n"
-"voc� quiser, nesse caso, ela tomar� de conta do disco\n"
-"r�gido!! (em vista a instala��o em outra m�quina).\n"
-"\n"
-"Voc� pode preferir repetir a instala��o.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Autom�tico"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Repetir"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Salvar sele��o de pacotes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instala��o do Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> move entre op��es  | <Espa�o> seleciona | <F12> pr�xima "
-"tela "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu ausente"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Escolher a��o"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avan�ado"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Por favor aguarde"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informa��o"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expandir �rvore"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Colapsar �rvore"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Mudar entre organiza��o plana ou em grupo"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "M� escolha, tente novamente\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Sua escolha? (padr�o %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Sua escolha? (padr�o %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Op��es: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Voc� quer usar o aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Sua escolha? (padr�o %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tcheco (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Alem�o"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Espanhol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Filand�s"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Franc�s"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Noruegu�s"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polon�s"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russo"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sueco"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Ingl�s (UK)"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Americano (US)"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Arm�nio (velho)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Arm�nio (m�quina de escrever)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Arm�nio (fon�tico)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latino)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Arm�nio (fon�tico)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "B�lgaro"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasileiro (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorusso"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Su��o (layout Alem�o)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Su��o (layout Franc�s)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tcheco (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Alem�o (sem teclas mortas)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dinamarqu�s"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruegu�s)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estoniano"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiano (layout \"Russo\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiano (layout \"Latin\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grego"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "H�ngaro"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelense"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelense (Fon�tico)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Island�s"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiano"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japon�s 106 teclas"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreano"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latino Americano"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litu�nio AZERTY (velho)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litu�nio AZERTY (novo)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litu�nio \"n�mero de colunas\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litu�nio \"fon�tico\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Lugar"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Maced�nio"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holand�s"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polon�s (layout QWERTY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polon�s (layout QWERTZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugu�s"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadense (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Russo (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Russo (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russo (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Eslov�nio"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslov�quio (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Eslov�quio (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidjani (cir�lico)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Table"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Teclado Tailand�s"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Teclado Tailand�s"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (modelo \"F\" tradicional)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (modelo moderno \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucraniano"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Americano (Internacional)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"n�mero de colunas\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Iugosl�vio (latin/cir�lico)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Monts circulares %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Remover os volumes l�gicos primeiro\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan/FistMouse (serial)"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse Gen�rico PS2 com roda"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 bot�o"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Mouse Gen�rico com 2 Bot�es"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Gen�rico"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Roda"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serial"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Mouse Gen�rico com 3 Bot�es"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech S�rie CC (serial)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "S�rie MM"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Mouse Logitech (serial, tipo C7 antigo)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 bot�es"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 bot�es"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "nenhum"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Nenhum Mouse"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Favor testar o mouse"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Para ativar o mouse,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVA SUA RODA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Terminar"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Pr�ximo ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Isto est� correto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Conectar � Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"A maneira mais comum de se conectar com adsl � pppoe.\n"
-"Mas algumas conex�es usam pptp, umas poucas usam dhcp.\n"
-"Se voc� n�o sabe, escolha 'usar pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usar dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usar pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usar pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Qual cliente dhcp voc� quer usar?\n"
-"O padr�o � dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nenhum adaptador de rede ethernet foi detectado em seu sistema.\n"
-"Eu n�o posso configurar esse tipo de conex�o."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Escolha a interface de rede"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Favor escolher qual adaptador de rede voc� quer usar para se conectar � "
-"Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nenhuma placa de rede encontrada"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Configurando rede"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Favor entrar com o nome do seu host (se voc� souber).\n"
-"Alguns servidores DHCP requerem o nome do host para funcionar.\n"
-"Seu nome do host deve ser um nome de host totalmente qualificado,\n"
-"como por exemplo ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Host name (nome do host)"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Auxiliar de Configura��o da Rede"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN externo"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Placa ISDN interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "De que tipo � sua conex�o ISDN?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Configura��o de Firewall detectado!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Configura��o de Firewall detectado!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configura��o ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Selecione o seu provedor.\n"
-" Se n�o estiver na lista, escolha N�o Listado"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protocolo da inicializa��o"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Resto do mundo"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Resto do mundo \n"
-" sem Canal-D (linhas arrendadas)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Qual protocolo voc� quer usar?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Qual tipo de placa voc� tem?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Eu n�o sei"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se voc� tiver uma placa ISA, os valores da pr�xima tela devem estar certos.\n"
-"\n"
-"Se voc� tiver uma placa PCMCIA, voc� tem que saber o irq e io de sua placa.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abortar"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continuar"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Qual � a sua placa ISDN?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Eu detectei um placa ISDN PCI, mas n�o sei qual � o tipo. Favor selecionar "
-"uma placa PCI na pr�xima tela."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nenhuma placa ISDN PCI encontrada. Favor selecionar uma na pr�xima tela"
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Favor escolher em qual porta serial seu modem est� conectado."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Op��es dialup"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nome da conex�o"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "N�mero do telefone"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID de Login"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Baseado em script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Baseado em terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nome do dom�nio"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primeiro Servidor DNS (opcional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Segundo Servidor DNS (opcional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Voc� pode se disconectar ou reconfigurar sua conex�o."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Voc� pode reconfigurar sua conex�o."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Voc� est� conectado � Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Voc� pode se conectar � Internet ou reconfigurar sua conex�o."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Voc� n�o est� conectado � Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Conectar"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Desconectar"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Configurar rede"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Conex�o e configura��o da Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Voc� pode se disconectar ou reconfigurar sua conex�o."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Voc� pode se disconectar ou reconfigurar sua conex�o."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configura��o da Rede"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Como voc� est� fazendo uma instala��o por rede, sua rede j� est� "
-"configurada.\n"
-"Clique em Ok para manter sua configura��o, ou cancelar para reconfigurar sua "
-"conex�o de Internet & Rede.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bem-vindo ao Ajudante de Configura��o de Rede\n"
-"\n"
-"Estamos para configurar sua conex�o de rede/internet.\n"
-"Se voc� n�o quiser usar a auto detec��o, desmarque a op��o.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Escolha o perfil a configurar:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Usar auto detec��o"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detectando dispositivos..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Conex�o normal via modem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detectado na porta %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Conex�o ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detectado %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Cone��o LAN"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectado na interface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Conex�o via cabo"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Conex�o via cabo"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Cone��o LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "placa(s) ethernet detectada(s)"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Escolha a ferramente que voc� quer usar"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Compartilhamento da Conex�o � Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Voc� quer iniciar sua conex�o ao iniciar?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configura��o da Rede"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Um problema ocorreu reiniciando a rede: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Parab�ns, a configura��o da rede e internet est� conclu�da.\n"
-"\n"
-"A configura��o agora ser� aplicada no seu sistema.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Quando isso terminar, n�s recomendados voc� a reiniciar o seu\n"
-"ambiente X para evitar o problema da mudan�a do nome do host."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ATEN��O: Esse dispostivo j� foi configurado para se conectar � Internet.\n"
-"Apenas aceite para manter esse dispositivo configurado.\n"
-"A modifica��o dos campos abaixo ir� sobrepor essa configura��o."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Favor entrar com a configura��o IP para esta m�quina.\n"
-"Cada item deve ser entrando como endere�o IP pontilhado-decimal\n"
-"(por exemplo, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configurando dispositivo de rede %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Endere�o IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP Autom�tico"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "O endere�o IP deve ser no formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Favor entrar com o nome do seu host.\n"
-"Seu nome do host deve ser um nome de host totalmente qualificado,\n"
-"como por exemplo ``mybox.mylab.myco.com'' .\n"
-"Voc� tamb�m pode entrar como o endere�o IP de um gateway se voc� tiver um"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Servidor DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dispositivo de gateway"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configura��o de proxies"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "O proxy deve ser http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "O proxy deve ser ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configura��o da Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Voc� quer tentar se conectar � Internet agora?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testando sua conex�o..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "O sistema est� conectado � Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Por raz�o de seguran�a, voc� ser� desconectado agora."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"O sistema n�o est� conectado � internet.\n"
-"Tente reconfigurar sua conex�o."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configura��o da Conex�o"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Favor preencher ou marcar os campos abaixo"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ da Placa"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Mem�ria da Placa (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO da Placa"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_O da Placa"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 da Placa"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "O n�mero do seu telefone"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nome do provedor (ex: provedor.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "N�mero do telefone do provedor"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 do provedor (opcional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 do provedor (opcional)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Escolha seu teclado"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Modo de discagem"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Tipo de conex�o: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tipo de conex�o: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Nome da conta (nome do usu�rio)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Senha da conta"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "falhou ao montar: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Parti��o extendida n�o suportada nessa plataforma"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Voc� tem um buraco em sua tabela de parti��o e eu n�o posso us�-lo.\n"
-"A �nica solu��o � mover suas parti��es prim�rias para ter o buraco pr�ximo "
-"das parti��es extendidas"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restaura��o pelo arquivo %s falhou: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erro gravando no arquivo %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Algo ruim est� acontecendo com o seu drive. \n"
-"O teste que checa a integridade dos dados falhou. \n"
-"Isso significa que gravar algo no disco resultar� em lixo aleat�rio."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "tem que ter"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "muito bom"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bom"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "talvez"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Sevidor CUPS remoto"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Servidor lpd remoto"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Impressora da rede (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servidor de Impress�o"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Dispositivo de Impress�o URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Erro gravando no arquivo %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(m�dulo %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP do servidor CUPS"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Default)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Selecionar Cone��o da Impressora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Como a impressora est� conetada?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Com um servidor CUPS remoto, voc� n�o tem que configurar\n"
-"nenhuma impressora aqui; elas ser�o detectadas automaticamente.\n"
-"Se tiver d�vida, selecione \"Servidor CUPS remoto\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Configura��o LAN"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Sevidor CUPS remoto"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "O endere�o IP deve ser no formato 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "O n�mero da porta deve ser num�rico"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Porta"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configura��o do estilo de inicializa��o"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Detectando dispositivos..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Testar portas"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Usar auto detec��o"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "detectado %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Dispositivo de Impress�o URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Favor escolher em qual porta serial seu modem est� conectado."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Dispositivo de Impress�o URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Configura��o"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instalando pacote %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instalando pacote %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Op��es da impressora lpd Remota"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Para usar uma fila de impress�o lpd remota, voc� precisa\n"
-"dar o nome do host e o servidor de impress�o e o nome da\n"
-"fila naquele servidor."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nome do host remoto"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nome do host remoto"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nome do host remoto"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Op��es de Impress�o SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Para imprimir em uma impressora SMB, voc� precisa\n"
-"dar o nome do host SMB (Nota! Ele pode ser diferente\n"
-"do host TCP/IP!) e possivelmente o endere�o IP do servidor de impress�o,\n"
-"como tamb�m o nome compartilhado para a impressora que voc� deseja acessar "
-"e\n"
-"qualquer informa��o aplic�vel sobre nome de usu�rio, senha e grupo de "
-"trabalho."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Host servidor SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP do servidor SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nome compartilhado"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grupo de trabalho"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Op��es de Impress�o NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Para imprimir em uma impressora NetWare, voc� precisar dar o\n"
-"nome do servidor de impress�o NetWare (Nota! ele pode ser diferente\n"
-"do host TCP/IP!) como tamb�m o nome da fila de impress�o para a impressora\n"
-"que voc� deseja acessar como qualquer nome de usu�rio e senha aplic�vel."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Servidor de Impress�o"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nome da Fila de Impress�o"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Op��es da Impressora Socket"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Para imprimir em uma impressora socket, voc� precisa prover\n"
-"o nome do host da impressora e a n�mero da porta (opcional)."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Nome do host da impressora"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Nome do host da impressora"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Dispositivo de Impress�o URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nome da impressora"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Descri��o"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lugar"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Isto est� correto?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Conex�o da Impressora"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Qual tipo de impressora voc� tem?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configura��o da Internet"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configura��o da Internet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Voc� quer testar a impress�o?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Testar portas"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Sim, imprimir ambas as p�ginas de teste"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Impressora"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Padr�o"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Imprimindo p�gina(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Imprimindo p�gina(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Imprimindo p�gina(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Imprimindo p�gina(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"A pagina de teste foi mandado ao dem�nio de impress�o,\n"
-"pode demorar um pouco at� a impressora come�ar.\n"
-"Estado da impress�o:\n"
-"%s\n"
-"\n"
-"A impress�o funcionou corretamente?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"A pagina de teste foi mandado ao dem�nio de impress�o,\n"
-"pode demorar um pouco at� a impressora come�ar.\n"
-"A impress�o funcionou corretamente?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Fechar"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Fechando (desconectando) a rede"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Fechando (desconectando) a rede"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Op��es da impressora"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configura��o da Internet"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "O nome da impressora deve conter apenas letras, n�meros e o s�mbolo _"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Iniciando sua conex�o..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configurar rede"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor n�o configurado"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Configurando rede"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Qual sistema de impress�o voc� quer usar?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Alto"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paran�ico"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Qual sistema de impress�o voc� quer usar?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Selecionar Cone��o da Impressora"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Qual sistema de impress�o voc� quer usar?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configurar Impressora"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instalando pacote %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Op��es da impressora"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Configurar Impressora"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Voc� gostaria de configurar uma impressora?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Aqui est�o as filas de impress�o.\n"
-"Voc� pode adicionar mais ou modificar as existentes."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Aqui est�o as filas de impress�o.\n"
-"Voc� pode adicionar mais ou modificar as existentes."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Configurar rede"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modo Normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Voc� quer testar a configura��o?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configura��o da Internet"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Voc� quer testar a configura��o?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Compartilhamento da Conex�o � Internet"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Conex�o da Impressora"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Imprimindo p�gina(s) de teste..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Voc� quer testar a configura��o?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Voc� quer reiniciar a rede"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Configura��o de proxies"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Porta"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "O proxy deve ser http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "O n�mero da porta deve ser num�rico"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "O proxy deve ser ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Autologin"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Senha"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Nenhuma senha"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "As senhas n�o conferem"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "N�o posso adicionar parti��o ao RAID _formatado_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "N�o posso gravar arquivo %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid falhou"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid falhou (talvez o raidtools esteja faltando)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Sem parti��es suficientes para RAID n�vel %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Iniciar o sistema de som ALSA (Arquitetura Avan�ada de Som Linux)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, um agendador de comando peri�dicos"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd � usado para monitarar o estado da bateria e gravando-o via syslog.\n"
-"Ele tamb�m pode ser usado para desligar a m�quina quando a bateria estiver "
-"fraca."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Executa comando agendados pelo comando at na hora especificado quando\n"
-"at estava rodando, e executa comandos grupos de comandos quando o uso de "
-"mem�ria estiver baixo o suficiente."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron � um program UNIX padr�o que executa progrmas especificados pelo\n"
-"usuaio em horas marcadas. vixie cron adiciona v�rias caracter�sticas ao "
-"UNIX\n"
-"cron b�sico, incluindo melhor seguran�a e melhores op��es de configura��o."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM adiciona suporte ao mouse � aplicativos Linux com base em texto\n"
-"tal como o Midnight Commander. Ele tamb�m permitir copiar e colar "
-"utilizando\n"
-"o mouse e inclui suporte para menus pop-up no console."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake executa uma detec��o do hardware existente, e\n"
-"opcionalmente configura um novo/alterado hardware."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache � um servidor World Wide Web. Ele � usado para servir arquivos\n"
-"HTML e CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"O internet superserver daemon (normalmente chamado inetd) inicia\n"
-"uma variedade de outros servi�os de internet quando necess�rio. � "
-"respons�vel\n"
-"pela inicializa��o de v�rios servi�os, incluindo telnet, ftp, rsh e rlogin. "
-"Disabilitando\n"
-"inetd, todos os servi�os pela qual ele � respons�vel tamb�m s�o "
-"desabilitados."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Iniciar filtro de pacots para kernel Linux s�rie 2.2, para criar\n"
-"um firewall para proteger sua m�quina de ataques de rede."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Esse pacote carrega o mapa de teclado selecionado como\n"
-"um comando em /etc/sysconfig/keyboard. Isso pode ser selecionado usando o\n"
-"utilit�rio kbdconfig. Voc� deve deixar isso ativar para a maioria da "
-"m�quinas."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Regenera��o autom�tica do heador do kernel no /boot para\n"
-"/usr/include/linux{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Detec��o e configura��o autom�tica do hardware na inicializa��o."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf ir� periodicamente executar v�rias tarefas durante a\n"
-"inicializa��o para manter a configura��o do sistema"
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd � o daemon de impress�o requerido para o lpr funcionar corretamente.\n"
-"Ele � basicamente um servidor que organiza os trabalhos �(s) impressora(s)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Servidor Virtual Linux, utilizado para criar um servidor de alta\n"
-"performance e alta acessibilidade."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) � um Servidor de Nome de Dom�nio (DNS) que � usado para\n"
-"transformar nome de hosts para endere�os IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta e desmonta todos os pontos de montagem do Network File\n"
-"System (NFS), SMB (Gerenciador de Rede/Windows) e NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Ativa/Desativa todas as interfaces de rede configuradas para iniciar\n"
-"na hora de inicializa��o."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS � um protocolo popular usado no compartilhamento de arquivos atrav�s\n"
-"de redes TCP/IP. Esse servi�o prov� a funcionalidade do servidor NFS, que � "
-"configurado atrav�s do arquivo /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS � um protocolo popular usado para compartilhar arquivos atrav�s de\n"
-"redes TCP/IP. Esse servi�o prov� a funcionalidade de trava de arquivos NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automaticamente ativa o Num Lock no console e XFree\n"
-"durante a inicializa��o."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Suporte para impressoras OKI-4w e compat�veis."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Suporte PCMCIA � utilizado normalmente para suportar coisas como\n"
-"ethernet ou modems em laptops. Ele n�o ser� iniciado a n�o ser que "
-"estejaconfigurado,\n"
-"ent�o � seguro te-lo instalado em m�quinas que n�o precisam dele."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"O portmapper gerencia conex�es RPC, que s�o usadas por\n"
-"protocolos como NFS ou NIS. O servidor portmap deve estar rodando em "
-"m�quinas\n"
-"que ser�o os servidores para os protocolos que utilizam o mecanismo RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix � um Agente de Transporte de Correio, que � um programa\n"
-"que move mensagens entre uma m�quina e outra."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Salva e restaura o entropy pool do sistema para melhor qualidade\n"
-"na gera��o rand�mica de n�mero."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Determinar dispositivos raw como dispositovs de bloco\n"
-"(como parti��es), para o uso em aplicativos como o Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"O daemon routed permite a atualiza��o autom�tica da tabela roteadora\n"
-"IP atrav�s do protocolo RIP. Enquanto o RIP � usado largamente em pequenas\n"
-"rede, protocolos de roteamento mais complexos s�o necess�rios em redes mais "
-"complexas."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"O protcolo rstat permite que us�rios da rede recebam\n"
-"informa��es sobre a perfomance de qualquer m�quina na rede."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"O protocolo rusers pertmite que os usu�rios da rede identifiquem\n"
-"quem est� logado na m�quina correspondente do outro."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"O protocolo rwho permite que usu�rios remotos peguem uma lista de todos os\n"
-"usu�rios logados em uma m�quina rodando o daemon rwho (similar ao finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Iniciar o sistema de som da sua m�quina"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog � um aparato que muitos daemons usam para gravar mensagens\n"
-"em v�rios arquivos de log. � uma boa id�ia sempre rodar o syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Carrega os drivers para seus dispositivos usb."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Inicia o Servidor de Fontes X (� obrigat�rio para a execu��o do XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Escolha quais servi�os devem ser inicializados automaticamente na "
-"inicaliza��o"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Impressora"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Modo do sistema"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Op��es da impressora lpd Remota"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Servidor, Bancos de dados"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "dispositivo"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "iniciado"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "parado"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servi�os e daemons"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nenhuma informa��o adicional\n"
-"sobre este servi�o, desculpe."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "No boot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Status:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Setor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Resto do mundo"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Acesso � Internet"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multim�dia - Gr�ficos"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Desenvolvimento"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Centro de Controle"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Interface de rede"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Host servidor SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Jogos"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Expert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalando pacote %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Eu n�o consigo ler sua tabela de parti��o, � muito defeituosa\n"
-"para mim. Eu irei tentar continuar limpando as parti��es defeituosas"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Erro"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Configura��o p�s-instala��o"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configura��o do estilo de inicializa��o"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Parab�ns!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalar"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Adicionar um usu�rio"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatando arquivo loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Sele��o de Grupo de Pacotes"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Escolha os pacotes que voc� quer instalar"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Fila remota"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Remover Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Nome do usu�rio"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Favor testar o mouse"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Favor tentar novamente"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Favor tentar novamente"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Nenhuma senha"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Cone��o LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Selecionar Cone��o da Impressora"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Favor escolher o layout do seu teclado."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Favor clicar em uma parti��o"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Escolha os pacotes que voc� quer instalar"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Favor testar o mouse"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Nome do usu�rio"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Escolha os pacotes que voc� quer instalar"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Favor escolher o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Detec��o de discos rigidos"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Nome do usu�rio"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Roda"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Roda"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Op��es do m�dulo:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Configura��o da Rede"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Escolha os pacotes que voc� quer instalar"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Escolha os pacotes que voc� quer instalar"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Setup dos sistemas de arquivos"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Op��es"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Favor escolher em qual porta serial seu modem est� conectado."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Configura��o da Rede"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Favor escolher o tipo do seu mouse."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Restaurar do disquete"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Favor escolher o tipo do seu mouse."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Outro"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instalar sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Restaurar do arquivo"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Restaurar do arquivo"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Personalizada"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/Aj_uda"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Anterior"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Status:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Restaurar do arquivo"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Pr�ximo ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Escolha pacotes a serem instalados"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Favor escolher o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Favor escolher o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Favor escolher o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Salvar no arquivo"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Favor testar o mouse"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Escolha os pacotes que voc� quer instalar"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Configura��o da Rede"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Configura��o da Rede"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Configura��o LAN"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Configura��o LAN"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Setup dos sistemas de arquivos"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "A Instala��o do %s falhou. Ocorreram os seguintes erros:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "nenhuma placa de rede encontrada"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Pronto"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Preparando instala��o"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "restrito"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "restrito"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatar parti��es"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Configura��o LAN"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Ponto de Montagem"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Escolha as parti��es que voc� quer formatar"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Escrit�rio"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Abortar"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Impressora"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instalar sistema"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Selecione arquivo"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Impressora remota"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Mensagem Inicial"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Nenhum adaptador de rede em seu sistema!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalar"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Nenhum adaptador de rede em seu sistema!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Sair da instala��o"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Compartilhamento da Conex�o � Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "O Compartilhamento da Conex�o � Internet est� ativo"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configura��o de compartilhamento da conex�o � Internet j� foi feita.\n"
-"Ela est� ativa.\n"
-"\n"
-"O que voc� gostaria de fazer?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "desativar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "liberar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "reconfigurar"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Desativando servidores..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "O Compartilhamento da Conex�o � Internet agora est� desativado."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "O Compartilhamento da Conex�o � Internet est� desativado"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configura��o do compartilhamento da conex�o � Internet j� foi feito.\n"
-"Est� desabilitado.\n"
-"\n"
-"O que voc� gostaria de fazer?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "ativar"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Ativando servidores..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "O Compartilhamento da Conex�o � Internet agora est� ativo."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Voc� est� para configurar o compartilhamento da conex�o � Internet do seu \n"
-"computador. Assim, outros computadores da sua rede local ser�o capaz de user "
-"a conex�o � Internet deste computador.\n"
-"\n"
-"Nota: voc� precisa de um Adaptador de Rede dedicado para criar um Rede Local "
-"(LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (usando m�dulo %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nenhum adaptador de rede em seu sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nenhum adaptador de rede foi detectado em seu sistema. Favor executar a "
-"ferramenta de configura��o de hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Existe apenas um adaptador de rede configurado em seu sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Irei configurar sua Rede Local (LAN) com esse adaptador."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Favor escolher qual adaptador de rede ser� conectado � su Rede Local."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor n�o configurado"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Configura��o do estilo de inicializa��o"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Configura��o da Internet"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencial conflinto de endere�o LAN encontra na configura��o atual de %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Configura��o de Firewall detectado!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Aten��o! Uma configura��o de firewall foi detectada. Talvez voc� ter� que "
-"fazer alguma corre��o manual ap�s a instala��o."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Configurando..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Configurando scripts, instalando programas, iniciando servidores..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas instalando pacote %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Tudo foi configurado.\n"
-"Voc� agora pode compartilhar sua conex�o com outros computadores na sua Rede "
-"Local (LAN), usando a configura��o autom�tica de rede (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "A configura��o j� foi feita, mas est� desativada."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "A configura��o j� foi feita e est� desativada."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "O Compartilhamento de Conex�o � Internet nunca foi configurado."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configura��o do compartilhamento da Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Bem-vindo ao utilit�rio de Compartilhamente da Conex�o � Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Clique em ``Configurar'' se voc� quiser abrir o ajudante de configura��o."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configura��o da Rede (%d adaptadores)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Apagar perfil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Perfil a apagar:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Novo perfil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Hostname:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Acesso � Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configurar Acesso � Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configura��o LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocolo"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configurar Rede Local (LAN)..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Ajudante..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Aplicar"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Por favor aguarde... Aplicando a configura��o"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Conectado"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "N�o conectado"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Desconectar..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Voc� n�o possui nenhuma interface configurada.\n"
-"Configure-as primeiro clicando em 'Configurar'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configura��o LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocolo da inicializa��o"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Iniciado na inicializa��o"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Ativo"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Ativo"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Voc� n�o possui nenhuma conex�o � Internet.\n"
-"Crie uma clicando em 'Configurar'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configura��o da conex�o � Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configura��o da conex�o � Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipo de conex�o: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Par�metros"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Placa Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Op��es do n�vel de seguran�a"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro de Controle"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Escolha a ferramente que voc� quer usar"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Canadense (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Island�s"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "serial"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "utiliza��o: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Favor escolher o layout do seu teclado."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Voc� quer que o BackSpace retorne o Delete no console?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Mudar Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Favor inserir o Cd-Rom de instala��o no seu drive e pressionar em Ok.\n"
-"Se voc� n�o o tiver, pressione em Cancelar para sair da atualiza��o on-line."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Incapaz de iniciar a atualiza��o on-line!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-#, fuzzy
-msgid "logdrake"
-msgstr "draknet"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Arquivo/_Novo"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Arquivo/_Abrir"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Arquivo/_Salvar"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Arquivo/Salvar _Como"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Arquivo/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Op��es"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Op��es/Teste"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/Aj_uda"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Ajuda/_Sobre"
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Nome do usu�rio"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Mensagem Inicial"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "M�quina:"
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "M�quina:"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Configura��o LAN"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache e Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "dispositivo"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatando"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Configura��o"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Salvar como..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Favor escolher o tipo do seu mouse."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nenhum usb_serial encontrado\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Deseja emula��o de 3 bot�es?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Selecione uma placa gr�fica"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Dispositivo de boot"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Configura��o de Firewall"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Configura��o de Firewall"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Voc� j� tem um firewall configurado.\n"
-"Clique em configurar para alterar ou remover o firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Clique em configurar para criar um firewall padr�o"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Escolha seu idioma"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Selecione a classe da instala��o"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detec��o de discos rigidos"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configurar mouse"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Escolha seu teclado"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Seguran�a"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Setup dos sistemas de arquivos"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatar parti��es"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Escolha pacotes a serem instalados"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Adicionar um usu�rio"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configurar rede"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configurar servi�os"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instalar gerenciador de inicializa��o"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Criar um disco de inicializa��o"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configurar X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Sair da instala��o"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"configurador pequenoFirewall\n"
-"\n"
-"Isso configura um firewall pessoal para essa m�quina Mandrake Linux.\n"
-"Para um firewall dedicado potente, favor procurar a distribui��o\n"
-"especilizada MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Agora lhe perguntaremos sobre qual servi�os voc� gostaria de permitir\n"
-"a Internet se conectar. Por favor, pense cuidadosamente sobre essas\n"
-"perguntas, j� que a seguran�a do seu computador � importante.\n"
-"\n"
-"Aten��o, se voc� n�o estiver usando um desses servi�os, retire o firewall "
-"dele. Voc� pode alterar essa configura��o a qualquer hora,\n"
-"basta re-executar esse aplicativo!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Voc� est� executando um servidor web nesta m�quina que voc� precisa\n"
-"que toda a Internet veja? Se voc� estiver executando um servidor web que\n"
-"precisa ser acessado por esta m�quina apenas, favor responder N�O aqui.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Voc� est� executando um servidor de nome nesta m�quina? Se voc� n�o\n"
-"configurou um que d� a sua informa��o de zona e IP para toda a Internet,\n"
-"favor responder n�o.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Voc� quer permitir receber conex�es Secure Shell (ssh)? Isso � um\n"
-"substituto da telnet que voc� pode usar para login. Se voc� estiver\n"
-"usando telnet agora, voc� deveria mudar definitivamente para ssh. telnet\n"
-"n�o � codificada -- ent�o alguns agressores podem roubar sua senha.\n"
-"ssh � codificada e n�o permite esse tipo de roubo."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Voc� quer permitir receber conex�es telnet?\n"
-"Isso � terrivelmente inseguro, como explicado na tela anterior. N�s\n"
-"fortemente recomendamos responder N�o aqui e utilizar ssh no lugar\n"
-"da telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Voc� est� executando um servidor FTP que precisa ser acess�vel pela\n"
-"Internet? Se voc� estiver, n�s realmente recomendamos que voc� user\n"
-"apenas para transfer�ncias an�nimas. Qualquer senha enviada por FTP pode\n"
-"ser roubada por invasores, desde que FTP n�o usa codifica��o de senhas.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Voc� est� executando um servidor de mensagens aqui? Se voc� esiver\n"
-"mando mensagens pelo pine, mutt ou qualquer outro cliente de texto,\n"
-"voc� provavelmente est�. Caso contr�rio, voc� deve retirar o firewall dele.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Voc� est� executando um servidor POP ou IMAP aqui? Ele seria\n"
-"utilizado para hospedar contas n�o baseadas na web para\n"
-"pessoas atrav�s desta m�quina.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Voc� parece estar utilizando um kernel 2.2. Se seu n�mero IP\n"
-"for automaticamente dado por um computador em sua casa ou \n"
-"escrit�rio (determinado dinamicamente), n�s precisamos permitir\n"
-"isso. � esse o caso?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"O seu computador est� sincronizando a hora com outro computador?\n"
-"Normalmente, isso � utilizado por organiza��es Unix/Linux m�dias-grandes\n"
-"para sincronizar o tempo para relat�rio, etc. Se voc� n�o for\n"
-"parte de uma grande empresa ou nunca ouviu sobre isso, voc� \n"
-"provalvemente n�o est�."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Configura��o completa. Essas altera��es podem ser gravadas no disco?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "N�o foi poss�vel abrir %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Erro arbindo %s para grava��o: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Configura��o de Firewall"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Por favor aguarde, preparando instala��o"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Servidor, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Computador de rede (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servidor NFS, servidor SMB, servidor Proxy, servidor SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Escrit�rio"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Esta��o de Trabalho Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Ferramentas para o seu Palm Pilot e seu Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Esta��o de Trabalho"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Servidor, Firewall/Roteador"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Nome do Dom�nio e Servidor de Informa��o da Rede"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programas de escrit�rio: processadores de texto (kword, abiword), tabelas "
-"(kspread, gnumeric), visualizadores pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-"Ferramentas relacionadas � �udio: tocadores de mp3 ou midi, mixers, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Livros e Howto's sobre Linux e Software Livre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Esta��o de Trabalho KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multim�dia - V�deo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conjunto de ferramentas para mensagens, not�cias, web, transfer�ncias de "
-"arquivos e bate-papo"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Servidor, Bancos de dados"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Servidor de banco de dados PostgreSQL ou MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Ferramentas para facilitar a configura��o do seu computador"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multim�dia - Som"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilit�rios"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documenta��o"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Ferramentas do Console"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Servidor de mensagens postfiz, servidor de not�cias Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Esta��o de Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Esta��o de Multim�dia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Configura��o LAN"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Mais Desktops Gr�ficos (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"O K Desktop Environment, o ambiente gr�fico b�sico acompanhando de uma "
-"cole��o de ferramentas"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ambiente Gr�fico"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache e Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Ferramentas para criar e gravar CD's"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Esta��o de Trabalho de Escrit�rio"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "servidor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programas gr�ficos como o The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Bibliotecas de desenvolvimento C e C++, programas e arquivos include"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Servidor de Rede"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Servidor, Correio/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Esta��o de Jogos"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Editor e visualizadores de V�deo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multim�dia - Gr�ficos"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programas de divertimento: arcade, estrat�gia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conjunto de ferramentas para ler e enviar mensagem e not�cias (pine, mutt, "
-"tin...) e para navegar na Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arquivamento, emuladores, monitoramento"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finan�a Pessoal"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Um ambiente gr�fico com um conjunto de aplicativos e ferramenas de desktop "
-"amig�veis"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clientes para protocolos diferentes incluindo ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet Gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programas editores/tocadores de som e v�deo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Outros Desktops Gr�ficos"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editores, shells, ferramentas de arquivos, terminais"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programas para gerenciar seu dinheiro, como o gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gereciador de Informa��o Pessoal"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multim�dia - Grava��o de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Esta��o de Trabalho Cient�fica"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Abortar"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "Pronto"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Escolha o usu�rio:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Impressora remota"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Agora voc� poder prover as op��es para o m�dulo %s."
-
-#~ msgid "Low"
-#~ msgstr "Baixo"
-
-#~ msgid "Medium"
-#~ msgstr "M�dio"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Algumas melhoras para esse n�vel de seguran�a, a principal � que existem\n"
-#~ "mais avisos e testes de seguran�a."
-
-#~ msgid "mount failed"
-#~ msgstr "falhou ao montar"
diff --git a/perl-install/share/po/ro.po b/perl-install/share/po/ro.po
deleted file mode 100644
index 82e30c776..000000000
--- a/perl-install/share/po/ro.po
+++ /dev/null
@@ -1,12989 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (c) 2000 MandrakeSoft
-# Florin Grad <florin@mandrakesoft.com>, 1999-2000
-# Dragos Marian Barbu <dragosb@softhome.net>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 7.1\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-04-30 2:55+0200\n"
-"Last-Translator: Florin Grad <florin@mandrakesoft.com>\n"
-"Language-Team: romanian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "Citirea configura�iei"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Carte grafic�"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Alege�i o carte grafic�"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Alege�i un server X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Server X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Alege�i un server X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "Server X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, fuzzy, c-format
-msgid "XFree %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:363
-#, fuzzy
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Ce tip de intr�ri dori�i s� ad�uga�i ?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-#, fuzzy
-msgid "XFree configuration"
-msgstr "Configura�ie post-install"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Alege�i memoria pentru cartea grafic�"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Alege�i op�iunile pentru server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Alege�i un  monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Cei doi parametri critici sunt rata de actualizare vertical�, care este "
-"rata\n"
-"la care �ntregul ecran e actualizat �i mai important rata de sincronizare\n"
-"orizontal�, care este rata la care liniile de scan sunt afi�ate.\n"
-"Este FOARTE IMPORTANT s� nu specifica�i un tip de monitor cu interval de\n"
-"sincronizare care dep�e�te capabilit��ile monitorului vostru: pute�i\n"
-"distruge monitorul �n acest fel.\n"
-"Dac� nu sunte�i sigur, alege�i parametri conservativi."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Rata de actualizare orizontal�"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Rata de actualizare vertical�"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor nu a fost �nc� configurat"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Cartea grafic� nu a fost configurat� �nc�"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Rezolu�ia nu a fost �nc� aleas�"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Dori�i s� testa�i configura�ia ?"
-
-#: ../../Xconfigurator.pm_.c:650
-#, fuzzy
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Aten�ie: testul e periculos pentru aceast� carte grafic�"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test de configura�ie"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"re�ncerca�i dup� ce a�i modificat ceva parametri"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "A ap�rut o eroare:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Testul se va termina �n %d secunde"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Configura�ia e corect�"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Eroare, re�ncerca�i dup� ce a�i modificat ceva parametri"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rezolu�ie"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Alege�i rezolu�ia �i culorile"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Carte grafic�: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-#, fuzzy
-msgid "More"
-msgstr "Deplaseaz�"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Expert Mode"
-msgstr "Expert"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Afi�a�i tot"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rezolu�ii"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatura : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tip de mouse : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Periferic pentru mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frecven�a orizontala pentru monitor : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frecven�a verticala pentru monitor : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Carte grafic� : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Carte grafic� : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memorie grafic� : %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, fuzzy, c-format
-msgid "Color depth: %s\n"
-msgstr "Op�iuni pentru culori:"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, fuzzy, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolu�ii"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Server XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, fuzzy, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Server XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Preg�tesc configura�ia X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Ce dori�i s� face�i ?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Alege�i un alt tip de monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Alege�i un alt tip de carte grafic�"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Schimba�i op�iunile server-ului"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Alege�i o alt� rezolu�ie"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Afi�eaz� informa�iile"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Testeaz� din nou"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Ie�ire"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, fuzzy, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr "Pastra�i configura�ia IP curent�"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Sever X la demaraj"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Pot s� configurez calculatorul sa demareze automat X la demaraj.\n"
-"Dori�i sa demara�i X c�nd redemara�i ?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "V� rog reconecta�i-v� ca %s pentru a activa schimb�rile"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "V� rog deloga�i-v� �i folosi�i Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 de culori (8 bi�i)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mii de culori (15 bi�i)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mii de culori (16 bi�i)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milioane de culori (24 bi�i)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliarde de culori (32 bi�i)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB sau mai mult"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 la 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 la 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Compatibil, 1024x768 la 87 Hz �ntre�esut (nu 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 la 87 Hz �ntre�esut, 800x600 la 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA Extins, 800x600 la 60 Hz, 640x480 la 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Ne-�ntre�esut SVGA, 1024x768 la 60 Hz, 800x600 la 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "�nalt� frecven�� SVGA, 1024x768 la 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frecven�� care e capabil de 1280x1024 la 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frecven�� care e capabil de 1280x1024 la 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frecven�� care e capabil de 1280x1024 la 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor care e capabil de 1600x1200 la 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor care e capabil de 1600x1200 la 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primul sector al parti�iei de demaraj"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primul sector al discului (MBR)"
-
-#: ../../any.pm_.c:120
-#, fuzzy
-msgid "SILO Installation"
-msgstr "Instalare LILO/grub"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Unde dori�i s� instala�i Gestionarul de demaraj ?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalare LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-#, fuzzy
-msgid "Yaboot"
-msgstr "Root"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Op�iunile principale ale gestionarului de demaraj"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-#, fuzzy
-msgid "Bootloader to use"
-msgstr "Op�iunile principale ale gestionarului de demaraj"
-
-#: ../../any.pm_.c:169
-#, fuzzy
-msgid "Bootloader installation"
-msgstr "Op�iunile principale ale gestionarului de demaraj"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Periferic de demaraj"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nu func�ioneaz� cu BIOS-urile vechi)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Mod video"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Timp de a�teptare �naintea demar�rii imaginii standard"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Parola"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Parola (din nou)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Limiteaz� op�iunile liniei de comand�"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "limiteaz�"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Cur��� /tmp la fiecare demaraj"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precizeaz� cantintatea de  RAM dac� e necesar (am g�sit %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Activeaz� profilurile multiple"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Introduce�i cantintatea de RAM �n MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Op�iunea ``Limiteaz� op�iunile liniei de comand�'' e inutil� f�r� parol�"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "�ncerca�i din nou"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Parolele nu corespund"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-#, fuzzy
-msgid "Default OS?"
-msgstr "Standard"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Acestea sunt diferitele intr�rile.\n"
-"Pute�i s� mai ad�uga�i �i altele sau s� schimba�i cele existente."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Adaug�"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Gata"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Modific� RAID"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Ce tip de intr�ri dori�i s� ad�uga�i ?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Alt SO (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Alt SO (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Alt SO (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imagine"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Cite�te-Scrie"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nesigur"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etichet�"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Standard"
-
-#: ../../any.pm_.c:326
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "�terge intrarea"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Eticheta goal� nu e permis�"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Trebuie s� ave�i o parti�ie swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Aceast� etichet� nu e permis�"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Am g�sit interfa�ele %s %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Ave�i o alt� interfa�a?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Ave�i vreo interfa�� %s ?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nu"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Vezi info hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalarea pilotului pentru %s cartea %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Care %s pilot s� �ncerc?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"�n anumite cazuri, pilotul %s necesit� informa�ii suplimentare pentru a\n"
-"func�iona corect, dar func�ioneaz� bine �i f�r�. Dori�i s� specifica�i\n"
-"op�iuni suplimentare sau �i permite�i s� interogheze calculatorul pentru\n"
-"informa�iile necesare? Ocazional, interogarea poate bloca calculatorul,\n"
-"dar n-ar trebui s� produce nici o deteriorare."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Autoprobeaz�"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Specifica�i op�iunile"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Pute�i furniza acum op�iunile modulului %s.\n"
-"Op�iunile sunt �n formatul ``nume=valoare nume2=valoare2 ...''.\n"
-"de exemplu, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Op�iuni pentru module:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"�nc�carea modulului %s a e�uat.\n"
-"Dori�i s��ncerca�i cu al�i parametri ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(deja ad�ugat %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Aceasta parol� e prea simpl�"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Va rog �nscrie�i numele utilizatorului"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Numele utilizatorului trebuie sa con�in� numai caractere minuscule, numere, "
-"`-' �i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Acest nume de utilizator e deja ad�ugat"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Ad�uga�i un utilizator"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Intra�i un utilizator\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Acceptare utilizator"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nume real"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Numele utilizatorului"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icoan�"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr ""
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Pot s� configurez calculatorul sa demareze automat X la demaraj.\n"
-"Dori�i sa demara�i X c�nd redemara�i ?"
-
-#: ../../any.pm_.c:833
-#, fuzzy
-msgid "Choose the default user:"
-msgstr "Alege�i noua m�rime"
-
-#: ../../any.pm_.c:834
-#, fuzzy
-msgid "Choose the window manager to run:"
-msgstr "Alege�i unealta pe care dori�i s� o folosi�i"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "V� rog, alege�i o limb�."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Pute�i s� alege�i alte limbi care vor fi disponibile dup� instalare"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr ""
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Ad�uga�i un utilizator"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-#, fuzzy
-msgid "Custom"
-msgstr "Personalizat"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "Estimare"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Acest pachet trebuie actualizat\n"
-"Sunte�i sigur c� dori�i s�-l deselecta�i ?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Anuleaz�"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bun venit Pira�ilor"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Slab"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Ridicat"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Ridicat"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoiac"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Va trebui s� folosi�i acest nivel cu grij�. Aceasta face ca sistemul s� fie\n"
-"mai u�or de folosit, dar foarte sensibil: nu trebuie s� fie folosit pentru "
-"un\n"
-"calculator conectat cu altele de pe Internet. Nu exist� nici o parol� de\n"
-"acces."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Parolele sunt acum activate, dar utilizarea lui ca un calculator �ntr-o\n"
-"re�ea tot nu recomandat�."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Acest a nivelul de securitate standard recomandat pentru un calculator care\n"
-"va fi conectat ca un client la Internet. Nu exist� verific�ri de securitate."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Cu acest nivel de securitate, utilizarea acestui calculator ca server\n"
-"devine posibil�. Securitatea este destul de ridicat� pentru a folosi acest\n"
-"sistem ca server care accept� conexiuni de la mul�i clien�i."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Avem func�ionalit��ile nivelului 4 de securitate dar acum sistemul e\n"
-"complet �nchis. Securitatea e la maximum."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Alege�i nivelul de securitate"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Alegerea nivelului de securitate"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Alege�i op�iunile pentru server"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, fuzzy, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bun venit la gestionarul de sisteme de operare %s!\n"
-"\n"
-"Pentru a afisa diferitele posibilitati, apasati <TAB>.\n"
-"\n"
-"Pentru a demara unul dintre ele, scrieti-i numele si apasati <ENTER> sau\n"
-"asteptati %d secunde pentru demararea din oficiu.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bun venit la gestionarul de sisteme de operare GRUB!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Folositi tastele %c si %c pentru selectarea intrarii puse in evidenta."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Apasati enter pentru a demara OS-ul selectat, 'e' pentru a edita"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "comandele inainte de a demara, sau 'c' pentru linia de comanda."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Intrarea selectata va demara dupa %d secunde"
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nu e destul spa�iu �n /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Meniu de Start"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Unde dori�i s� instala�i Gestionarul de demaraj ?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Configura�ie post-install"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-#, fuzzy
-msgid "/_File"
-msgstr "Fi�iere:\n"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Monitor"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Alege�i un alt tip de monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Nume de domeniu"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Periferic de demaraj"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-#, fuzzy
-msgid "Configure"
-msgstr "Configura�i X"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm_.c:114
-#, fuzzy, c-format
-msgid "%d seconds"
-msgstr "Testul se va termina �n %d secunde"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Imposibil de ad�ugat o alta parti�ie"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Pute�i s� alege�i alte limbi care vor fi disponibile dup� instalare"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Anuleaz�"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belgian"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "German"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grec"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norvegian"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Afi�eaz�"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Italian"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "serie"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "V� rog face�i mai �nt�i o copie a datelor dumneavoastr�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Citi�i cu aten�ie!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Dac� dori�i s� folosi�i aboot, asigura�i-v� s� l�sa�i un spa�iu liber\n"
-"(2048 de sectoare sunt de ajuns) la �nceputul discului"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Eroare"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Alege�i ac�iunea"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Ave�i o singur� parti�ie mare FAT\n"
-"(�n general folosit� de MicroSoft  Dos/Windows).\n"
-"Va sugerez s� redimensiona�i mai �nt�i acea parti�ie\n"
-"face�i clic pe ea �i apoi pe \"Redimensioneaz�\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "V� rog face�i clic pe o parti�ie"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalii"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "montare e�uat�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Gol"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Alt tip"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipul de fi�iere sistem: "
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Creaz�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tip"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Folose�te ``%s'' �n loc"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "�terge"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Folose�te ``Demontare' mai �nt�i"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Dup� schimbarea tipului de parti�ie %s, toate datele de pe aceasta "
-"parti�ievor fi pierdute"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Alege�i ac�iunea"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Creeaz� o nou� parti�ie"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Trece �n mod expert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Trece �n mod normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Anuleaz�"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Continua�i totu�i?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Ie�ire f�r� a �nregistra"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Ie�ire din program f�r� a scrie �n tabloul de parti�ii ?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Dori�i s� testa�i configura�ia ?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Auto aloca"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "�terge tot"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Afi�eaz� informa�iile"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Toate parti�iile principale sunt alocate"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Imposibil de ad�ugat o alta parti�ie"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Pentru a avea mai multe parti�ii, �terge�i una pentru a putea crea una de "
-"tip Extended "
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Scrie tabloul de parti�ii"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Salveaz� tabelul de parti�ii"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Salveaz� tabelul de parti�ii"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Salveaz� tabelul de parti�ii"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Automontare automat� a perifericelor extractibile"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Selec�ioneaz� fi�ierul"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Tabloul de parti�ie salvat nu are aceea�i m�rime\n"
-"S� continui totu�i ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Avertisment"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Introduce�i o dischet� �n periferic\n"
-"Toate datele de pe aceast� dischet� vor fi pierdute"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "�ncercare de salvare a tabloului de parti�ii"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Afi�eaz� informa�iile"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Punct de montaj"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-#, fuzzy
-msgid "Options"
-msgstr "Informa�ie"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Redimensioneaz�"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Deplaseaz�"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formateaz�"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montaj"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Adaug� la RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Adaug� la LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Demonteaz�"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "�terge din RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "�terge din LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modific� RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Folose�te pentru loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Creeaz� o nou� parti�ie"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sector de �nceput: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "M�rimea �n MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipul de fi�iere: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punct de montaj: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferin��: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatarea fi�ierului loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Schimb� tipul parti�iei"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "Ce limb� dori�i ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Unde dori�i s� monta�i fi�ierul loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Unde dori�i s� monta�i perifericul %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nu pot s� desfiin�ez acest punct de montaj pentru c� parti�ia e "
-"folosit�pentru loopback.\n"
-"�terge�i loopback-ul mai �nt�i"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Calculeaz� salturile de fi�iere FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Redimensioneaz�"
-
-#: ../../diskdrake/interactive.pm_.c:609
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Ce tip de parti�ie dori�i?"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Toate datele de pe aceasta parti�ie ar trebui salvate mai �nt�i"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Dup� redimensionarea parti�iei %s toate datele de pe aceasta parti�ie vor fi "
-"pierdute"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Alege�i noua m�rime"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "M�rimea �n MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Pe ce disc dori�i s� schimba�i ?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "La ce sector dori�i sa schimba�i ?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Schimb�"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Schimb� parti�ia..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Alege�i un RAID existent la care s� ad�uga�i"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nou"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Alege�i un LVM existent la care s� ad�uga�i"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Aceast� parti�ie nu poate fi folosit� pentru loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Numele fi�ierului loopback"
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nume real"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Fi�ier deja folosit de un alt loopback, alege�i un altul"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Fi�ierul exist� deja. S�-l folosesc ?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Op�iuni pentru module:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "periferic: "
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivel"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "m�rimea por�iunii "
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Aten�ie: aceasta opera�ie e periculoas�."
-
-#: ../../diskdrake/interactive.pm_.c:906
-#, fuzzy
-msgid "What type of partitioning?"
-msgstr "Ce tip de imprimanta ave�i?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"�mi pare r�u dar nu voi accepta s� creez /boot at�t de departe � disc (pe un "
-"cilindru > 1024).\n"
-"Sau folosi�i LILO soi nu va func�iona, sau nu folosi�i LILO �i atunci nu\n"
-"ave�i nevoie de /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Parti�ia pe care a�i selec�ionat-o pentru ad�ugare ca root (/) e fizic "
-"localizat� dincolo\n"
-"de cilindru 1024 pe discul dur �i nu ave�i nici o parti�ie /boot.\n"
-"Dac� planifica�i s� folosi�i LILO ca gestionar de demaraj, asigura�i-v� "
-"c�a�i ad�ugat o parti�ie /boot."
-
-#: ../../diskdrake/interactive.pm_.c:934
-#, fuzzy
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"A�i selectat o parti�ie software root en tant que RAID.\n"
-"Nici un gestionar de boot nu e capabil s� gereze aceasta f�r�\n"
-"o partitie /boot. Folosi�i deci o parti�ie /boot dac� dori�i s� folosi�i\n"
-"lilo sau grub."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabloul de parti�ii al perifericului %s va fi scris pe disc!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Va trebui s� redemara�i pentru ca schimb�rile sa fie luate �n considerare"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Dup� formatarea parti�iei %s toate datele de pe aceasta parti�ie vor fi "
-"pierdute"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatare"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatarea fi�ierului loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatarea parti�iei %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid a e�uat"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Creeaz� o nou� parti�ie"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Creeaz� o nou� parti�ie"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Rezolu�ii"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Periferic: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Litera perifericului DOS: %s (doar o presupunere)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tip: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nume: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "M�rimea: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectori"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "De la cilindrul %d la cilindrul %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Neformatat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Fi�ier(e) loopback: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Parti�ia demarat� din oficiu\n"
-"    (pentru demaraj MS-DOS, nu pentru lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivel %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "M�rimea por�iunii %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discuri-RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Numele fi�ierului loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "M�rime: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s cylinders, %s heads, %s sectors\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discuri-LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipul tabloul de parti�ii : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "pe bus-ul %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, fuzzy, c-format
-msgid "Options: %s"
-msgstr "Parti�ie"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Tipul de fi�iere: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Aceast� parole e prea simpl� (ar trebui s� fie de cel pu�in %d caractere)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Parolele nu corespund"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Schimb� tipul parti�iei"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "V� rog face�i clic pe o parti�ie"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Server DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s Formatarea %s e�uat�"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nu �tiu cum s� formatez %s �n tipul %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "eroare la demontarea %s: %s"
-
-#: ../../fsedit.pm_.c:21
-#, fuzzy
-msgid "simple"
-msgstr "Fi�ier"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Punctele de montaje trebuie sa �nceap� cu un /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "O parti�ie cu punctul de montaj %s exist� deja\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Ave�i nevoie de un sistem de fi�iere serios (ext2, reiserfs) pentru\n"
-"acest punct de montaj.\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Ave�i nevoie de un sistem de fi�iere serios (ext2, reiserfs) pentru\n"
-"acest punct de montaj.\n"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Eroare la citirea  %s pentru a scrie: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"O eroare a ap�rut - nu am g�sit nici un periferic pentru a instala noi "
-"fi�iere\n"
-"sistem. Verifica�i harware-ul pentru a detecta cauza acestei probleme."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nu ave�i nici o parti�ie!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Pute�i alege acum serviciile ce dori�i s� ini�ializa�i la demararea\n"
-"calculatorului. Dac� plasa�i mouse-ul deasupra rubricii, un mic balon de\n"
-"ajutor va apare pentru a descrie rolul serviciului respectiv."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"V� rog selecta�i portul corect. De exemplu, portul COM1 din Windows e\n"
-"numit ttyS0 �n Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (de la LInux LOader) �i Grub sunt gestionare de demaraj. Am�ndoi sunt\n"
-"capabili s� demareze Linux sau un alt sistem prezent �n calculator.\n"
-"�n mod normal, aceste alte sisteme de operare sunt detectate �i instalate\n"
-"corect. Dac� cumva nu e cazul, pute�i ad�uga o intrare manual �n acest\n"
-"ecran. Ave�i grij� s� alege�i parametrii cei buni.\n"
-"\n"
-"\n"
-"Pute�i de asemenea s� interzice�i accesul acestor alte sisteme a altor \n"
-"utilizatori, caz �n care ar trebui s� �terge�i intr�rile acestor sisteme.\n"
-"�n acest ultim caz �ns�, ve�i avea nevoie de un floppy de demaraj pentru\n"
-"a putea le demara!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Va trebui s� indica�i unde s� pune�i informa�ia necesar� pentru a porni "
-"Linux.\n"
-"\n"
-"\n"
-"�n general alege�i \"Primul sector al discului\". Alege�i altceva doar dac� "
-"�ti�i ce face�i."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nu pot s� folosesc difuzia f�r� nici un domeniu NIS"
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Introduce�i o dischet� �n perifericul %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Eroare la citirea fi�ierului %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Trebuie s� ave�i o parti�ie root.\n"
-"Pentru aceasta, crea�i o parti�ie (sau face�i clic pe un existent�).\n"
-"Alege�i apoi ac�iunea ``Punct de montaj'' �i fixa�i-o la '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Trebuie s� ave�i o parti�ie swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"N'ave�i nici o parti�ie swap\n"
-"\n"
-"S� continui totu�i?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Trebuie s� ave�i o parti�ie swap"
-
-#: ../../install_interactive.pm_.c:90
-#, fuzzy
-msgid "Use free space"
-msgstr "Folose�te pentru loopback"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-#, fuzzy
-msgid "Use existing partition"
-msgstr "Formatarea parti�iilor"
-
-#: ../../install_interactive.pm_.c:102
-#, fuzzy
-msgid "There is no existing partition to use"
-msgstr "�ncercare de salvare a tabloului de parti�ii"
-
-#: ../../install_interactive.pm_.c:109
-#, fuzzy
-msgid "Use the Windows partition for loopback"
-msgstr "Folose�te pentru loopback"
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Ce parti�e dori�i s� folosii� pentru a instala Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Alege�i m�rimile"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "M�rimea parti�iei root �n MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "M�rimea parti�iei swap �n MB:: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:128
-#, fuzzy
-msgid "Which partition do you want to resize?"
-msgstr "Ce tip de parti�ie dori�i?"
-
-#: ../../install_interactive.pm_.c:130
-#, fuzzy
-msgid "Computing Windows filesystem bounds"
-msgstr "Calculeaz� salturile de fi�iere FAT"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"AVERTISMENT!\n"
-"\n"
-"DrakX va redimensiona acum parti�iile Windows. Ave�i grij�: aceast� "
-"opera�ie\n"
-"est periculoas�. Dac� nu a�i f�cut-o deja, ar trebui mai �nt�i s� p�r�si�i\n"
-"instalarea �i �a executa�i scandisk �n Windows (�i defrag op�ional), apio\n"
-"re�ncepe�i instalarea. Ar trebui de asemenea s� face�i o copie a datelor\n"
-"dumneavoastr�. Dac� sunte�i sigur, ap�sa�i Ok."
-
-#: ../../install_interactive.pm_.c:147
-#, fuzzy
-msgid "Which size do you want to keep for windows on"
-msgstr "La ce sector dori�i sa schimba�i ?"
-
-#: ../../install_interactive.pm_.c:148
-#, fuzzy, c-format
-msgid "partition %s"
-msgstr "Parti�ie"
-
-#: ../../install_interactive.pm_.c:155
-#, fuzzy, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Redimensionarea automat� a e�uat"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:182
-#, fuzzy, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Dup� redimensionarea parti�iei %s toate datele de pe aceasta parti�ie vor fi "
-"pierdute"
-
-#: ../../install_interactive.pm_.c:190
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Formatarea parti�iilor"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:197
-#, fuzzy, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Pute�i parti�iona acum discul %s dumneavoastr� dur\n"
-"C�nd a�i terminat, nu uita�i s� �nregistra�i folosind `w'"
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nu ave�i nici o parti�ie Windows"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Imposibil de ad�ugat o alta parti�ie"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:251
-#, fuzzy, c-format
-msgid "Partitioning failed: %s"
-msgstr "Tipul tabloul de parti�ii : %s\n"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Configura�ie re�ea"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Oprire re�ea"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"A ap�rut o eroare pe care nu �tiu s� o interpretez �n mod corect.\n"
-"Continua�i pe riscul dumneavoastr�."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplica�i pounctul de montaj %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"C�teva pachete importante nu s-au instalat corect.\n"
-"Sau ave�i o problem� cu perifericul de cdrom sau cu \n"
-"cdrom-ul propriu-zis. Folosi�i comanda \"rpm -qpl \n"
-"Mandrake/RPMS/*.rpm\" pentru a verifica cdrom-ul pe un\n"
-"sistem instalat.\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bine a�i venit la %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nici dischet� disponibil�"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "�ncepe etapa `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Tip de instalare"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "V� rog alege�i unul din urm�toarele tipuri de instalare"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "M�rimea total� a grupurilor selectate e �n jur de %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Dac� dori�i s� instala�i mai pu�in dec�t aceast� m�rime,\n"
-"selecta�i procentul pachetelor pe care dori�i s� le instala�i.\n"
-"\n"
-"Un procent slab va instala numai pachetele cele mai inmportante;\n"
-"un procent de 100% va instala toate pachetele selectate."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Nu ave�i spa�iu pe discul dunmeavoastr� dec�t pentru %d%% al acestor\n"
-"pachete.\n"
-"\n"
-"Dac� dori�i s� instala�i mai pu�in dec�t at�t,\n"
-"selecta�i procentul pachetelor pe care dori�i s�le instala�i.\n"
-"Un procent slab nu va installa dec�t pachetele cele mai importante;\n"
-"un procent de %d%% va instala c�t de multe pachete va fi posibil."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Ve�i putea s� le alege�i mai �n detaliu la etapa urm�toare."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procentul pachetelor de instalat"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Selectarea grupurilor de pachete"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Selectare individual� a pachetelor"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "M�rime total�: %d / %d MB "
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pachet defectuos"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nume: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versiune: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "M�rime: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importan��: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Nu ave�i destul spa�iu pentru a instala acest pachet"
-
-#: ../../install_steps_gtk.pm_.c:422
-#, fuzzy
-msgid "The following packages are going to be installed"
-msgstr "Pachetele urm�toare urmeaz� s� fie dezinstalate"
-
-#: ../../install_steps_gtk.pm_.c:423
-#, fuzzy
-msgid "The following packages are going to be removed"
-msgstr "Urm�toare pachete vor fi instalate/�terse"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Nu pute�i selecta/deselecta acest pachet"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Acesta este un pachet indispensabil �i nu poate fi deselectat"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nu pute�i deselecta aces pachet. E deja instalat"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Acest pachet trebuie actualizat\n"
-"Sunte�i sigur c� dori�i s�-l deselecta�i ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Nu pute�i deselecta acest pachet. Trebuie acualizat."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalare"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "�nregistreaza pe dischet�"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Selectare individual� a pachetelor"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Dezinstalare"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Alege�i pachetele pe care dori�i s� le instala�i"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "�n curs de instalare"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Estimare"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Timp r�mas "
-
-#: ../../install_steps_gtk.pm_.c:528
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Preg�tesc instalarea"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pachete"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalarea pachetului  %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-#, fuzzy
-msgid "Accept"
-msgstr "Acceptare utilizator"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#, fuzzy
-msgid "Refuse"
-msgstr "Redimensioneaz�"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Schimba�i Cd-Rom-ul!\n"
-"\n"
-"V� rog introduce�i Cd-Rom etichetat \"%s\" �i apoi ap�sa�i Ok.\n"
-"Dac� nu-l ave�i, ap�sa�i Anuleaz� pentru a evita instalarea de pe acest Cd-"
-"Rom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "S� continui totu�i?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "O eroare a ap�rut la ordonarea pachetelor:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "A fost o eroare la instalarea pachetelor:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "A ap�rut o eroare"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Dori�i s� testa�i configura�ia ?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatur�"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Alege�i tastatura."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Ce tip de instalare dori�i?"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Install/Update"
-msgstr "Instalare/Actualizare"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Is this an install or an update?"
-msgstr "Este vorba de o instalare sau de o actualizare ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recomandat"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Actualizare"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Selectare individual� a pachetelor"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "V� rog, alege�i tipul de mouse?"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port Mouse"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Pe ce port serie este conectat mouse-ul?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Configura�ie cartele PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Configura�ia IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nici o parti�ie disponibil�"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Alege�i punctele de montaj"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, fuzzy, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nu pot citi tabloul de parti�ii, e prea deteriorat dup� mine :(\n"
-"Voi �ncerca s� continui �terg�nd parti�iile gre�ite"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake a e�uat la citirea corect� a tabloului de parti�ii.\n"
-"Continua�i pe riscul dumneavoastr�!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "N'am g�sit nici o parti�ie root"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Parti�ia Root"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Care e parti�ia root (/) a sistemului dumneavoastr�?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Trebuie s� redemara�i pentru a �nregistra modific�rile tabloului de parti�ii"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Alege�i parti�iile pe care dori�i sa le formata�i"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "S� verific blocurile defectuoase?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatarea parti�iilor"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Crearea �i formatarea fi�ierului %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Swap insuficient pentru a termina instalarea, mai ad�uga�i ceva"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "C�utarea pachetelor disponibile"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Cautarea pachetelor de actualizat"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, fuzzy, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Sistemul dumneavoastr� nu ar destul spa�iu disponibil pentru instalare\n"
-"sau actualizare"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Complete (%dMB)"
-msgstr "Normal"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Minimum (%dMB)"
-msgstr "(%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomandat"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaureaz� din dischet�"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaureaz� din dischet�"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Selectarea grupurilor de pachete"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Introduce�i o dischet� �n perifericul %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "�nregistreaza pe dischet�"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Alege�i pachetul de instalat"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "A�teptare"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Dac� ave�i toate CD-urile din lista de mai jos, ap�sa�i Ok.\n"
-"Dac� nu ave�i nici unul din aceste CD-uri, ap�sa�i Anuleaz�.\n"
-"Dac� nu v� lispsesc dec�t c�teva CD-uri, deselecta�i-le �i face�i click pe "
-"Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom etichetat \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Preg�tesc instalarea"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"instalarea pachetului %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configura�ie post-install"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Introduce�i o dischet� �n perifericul %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Introduce�i uo dischet� goal� �n perifericul %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Ave�i acum posibilitatea de a recupera de pe Internet programele destinate\n"
-"criptajului.\n"
-"\n"
-"AVERTISMENT:\n"
-"\n"
-"Din cauza diferitelor cerin�e generale aplicabile la aceste programe �n\n"
-"func�ie de diferite jurisdic�ii, clientul �i/sau utilizatorul final al\n"
-"acestor programe ar trebui s� se asigure c� jurisdic�ia �i permite s�\n"
-"foloseasc� sau s� stocheze aceste programe.\n"
-"\n"
-"�nc�lcarea eventual� a unei interziceri �n acest domeniu ar putea s� fie\n"
-"sac�ionat� sever de jurisdic�ia dumneavoastr�.\n"
-"\n"
-"�n nici un caz MandrakeSoft sau unul dintre fabrican�ii s�i �i/sau\n"
-"furnizorii s�i n'ar putea s� poarte responsabilitatea unor deterior�ri\n"
-"indirecte sau accidentale (incluz�nd, dar f�r� as e limita la pierderi\n"
-"sau profituri, �ntreruperi de afaceri, pierdere a datelor comerciale �i\n"
-"alte pierderi �i unele indemniz�ri eventuale din cauza unor decizii)\n"
-"suscitate �n urma folosirii, posesiei, sau a simplei recuper�ri a acestor\n"
-"programe, la care clientul sau/�i utilizatorul final ar avea acces dup�\n"
-"acceptarea prezentului acord.\n"
-"\n"
-"\n"
-"Pentru orice �ntreb�ri cu privire a acestui acord, v� rog contacta�i\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Contactarea oglinzii pentru recuperarea pachetelor disponibile"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Alege�i o oglind� de la care s� recupera�i pachetele"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Contactarea oglinzii pentru recuperarea pachetelor disponibile"
-
-#: ../../install_steps_interactive.pm_.c:967
-#, fuzzy
-msgid "Which is your timezone?"
-msgstr "Care e folosin�a sistemului dumneavoastr�?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Ceasul dumneavoastr� hardware e fixat la GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "Server NIS"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-#, fuzzy
-msgid "Remote CUPS server"
-msgstr "Coad� distant�:"
-
-#: ../../install_steps_interactive.pm_.c:1015
-#, fuzzy
-msgid "No printer"
-msgstr "Imprimant� local�"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Ave�i o alt� interfa�a?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044
-#, fuzzy
-msgid "Mouse"
-msgstr "Mouse USB"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Imprimant�"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Folose�te NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Imprimant� local�"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Alege�i parola pentru root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Nici o parol�"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Aceast� parole e prea simpl� (ar trebui s� fie de cel pu�in %d caractere)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentificare"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autentificare"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Server NIS"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autentificare NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Domeniu NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Server NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-#, fuzzy
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"O dischet� personalizat� de demaraj permite un mod de a accede la sistemul\n"
-"vostru Linux f�r� a depinde de gestionarul de demaraj normal. Acesta este \n"
-"util dac� nu dori�i s� instala�i LILO (sau grub) �n sistem sau dac� alte \n"
-"sisteme �terg LILO sau dac� LILO nu func�ioneaz� �n sistemul dumneavoastr�.\n"
-"O dischet� personalizat� poate fi de asemena folosit� ca o imagine de\n"
-"depanaj, ceea ce permite recuper�ri mult mai u�oare �n urm� unor pane "
-"severe.\n"
-"Dori�i s� crea�i o dischet� de demaraj pentru sistemul dumneavoastr� ?"
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primul periferic de dichet�"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Al doilea periferic de dischet�"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Sari peste"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"O dischet� personalizat� de demaraj permite un mod de a accede la sistemul\n"
-"vostru Linux f�r� a depinde de gestionarul de demaraj normal. Acesta este \n"
-"util dac� nu dori�i s� instala�i LILO (sau grub) �n sistem sau dac� alte \n"
-"sisteme �terg LILO sau dac� LILO nu func�ioneaz� �n sistemul dumneavoastr�.\n"
-"O dischet� personalizat� poate fi de asemena folosit� ca o imagine de\n"
-"depanaj, ceea ce permite recuper�ri mult mai u�oare �n urm� unor pane "
-"severe.\n"
-"Dori�i s� crea�i o dischet� de demaraj pentru sistemul dumneavoastr� ?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "�mi pare r�u dar nu g�sesc nici un periferic de dischet� disponibil."
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Alege�i perifericul pe care-l dori�i pentru a realiza un disc de demaraj."
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Introduce�i o dischet� �n perifericul %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Crearea dischetei de demaraj"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Peg�tirea gestionalului de demaraj"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-#, fuzzy
-msgid "Do you want to use aboot?"
-msgstr "Vre�i s� folosi�i SILO?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Eroare la instalrea lui aboot,\n"
-"s� �ncerc s� for�a�i instalarea chiar dac� aceasta distruge prima parti�ie ?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instala�i un gestionar de demaraj"
-
-#: ../../install_steps_interactive.pm_.c:1259
-#, fuzzy
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalarea lui LILO a e�uat. Urm�toarea eroare a ap�rut:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Introduce�i uo dischet� goal� �n perifericul %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Creati discheta de autoinstalare"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"C�teva etape nu au fost completate.\n"
-"\n"
-"Chiar vre�i s� termina�i acum?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicit�ri, instalarea e complet�.\n"
-"Scoate�i media de demaraj �i ap�sa�i Enter pentru redemaraj.\n"
-"\n"
-"\n"
-"Pentru informa�ii asupra corec�ii disponibile pentru aceasta versiune\n"
-"Mandrake Linux, consulta�i Erata disponibil� la \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informa�iile asupra configur�rii sistemului sunt disponibile �n \n"
-"capitolul referitor la post instalare din \n"
-"Oficial Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1354
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "Creati discheta de autoinstalare"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizat"
-
-#: ../../install_steps_interactive.pm_.c:1361
-#, fuzzy
-msgid "Replay"
-msgstr "Re�ncarc�"
-
-#: ../../install_steps_interactive.pm_.c:1364
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Selectare individual� a pachetelor"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalare Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> �ntre elemente | <Space> selecteaz� | <F12> urm�torul ecran"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Alege�i ac�iunea"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Pu�intic� r�bdare"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expanda�i Arborele"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "�nchide�i Arborele"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Bascula�i �ntre plat �i triere �n func�ie de grup"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Alegere gre�it�, �ncerca�i din nou\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ce alege�i? (din oficiu %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ce alege�i? (din oficiu %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Parti�ie"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Vre�i s� folosi�i SILO?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ce alege�i? (din oficiu %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Ceh (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "German"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spaniol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finlandez"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francez"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norvegian"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polonez"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rus"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Suedez"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Tastatura UK"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Tastatura US"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Ukrainian"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenian (vechi)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenian (ma�in� de scris)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenian (fonetic)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgian"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armenian (fonetic)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgar"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilian (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorus"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Elve�ian (dispozi�ie german�)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Elve�ian (dispozi�ie francez�)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Ceh (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "German (f�ra taste moarte)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danez"
-
-#: ../../keyboard.pm_.c:210
-#, fuzzy
-msgid "Dvorak (US)"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:211
-#, fuzzy
-msgid "Dvorak (Norwegian)"
-msgstr "Norvegian"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonian"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgian (dispozi�ie \"Rus�\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgian (dispozi�ie \"Latin�\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grec"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungar"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croat"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraelian"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Izraelian (fonetic)"
-
-#: ../../keyboard.pm_.c:224
-#, fuzzy
-msgid "Iranian"
-msgstr "Ukrainian"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandez"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italian"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Tastatura UK"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latin American"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanian AZERTY (vechi)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanian AZERTY (nou)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanian QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuanian \"fonetic\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Informa�ie"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Olandez"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polonez (dispozi�ie qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polonez (dispozi�ie qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portughez"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadian (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "us (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "us (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "us (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Sloven"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovac (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovac (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Iugoslav (dispozi�ie latin�)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabel"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tastatur� Thai"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Tastatur� Thai"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turc (tradi�ional model \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turc (model \"Q\" modern)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrainian"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Tastatur� US (interna�ional)"
-
-#: ../../keyboard.pm_.c:269
-#, fuzzy
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Lituanian QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslav (dispozi�ie latin�)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Montaje circulare %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Mouse - Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-#, fuzzy
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse PS/2 generic"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Mouse generic cu 2 butoane"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generic"
-
-#: ../../mouse.pm_.c:46
-#, fuzzy
-msgid "Wheel"
-msgstr "nivel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serie"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Mouse generic cu 3 butoane"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serie, tip vechi C7)"
-
-#: ../../mouse.pm_.c:66
-#, fuzzy
-msgid "busmouse"
-msgstr "F�r� mouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "nici unul"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "F�r� mouse"
-
-#: ../../mouse.pm_.c:499
-#, fuzzy
-msgid "Please test the mouse"
-msgstr "V� rog, alege�i tipul de mouse?"
-
-#: ../../mouse.pm_.c:500
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "V� rog, alege�i tipul de mouse?"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-#, fuzzy
-msgid "Finish"
-msgstr "Finlandez"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "E corect ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-#, fuzzy
-msgid "Connect to the Internet"
-msgstr "Nume de conexiune"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:37
-#, fuzzy
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Ce tip de parti�ie dori�i?"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-#, fuzzy
-msgid "Choose the network interface"
-msgstr "Alege�i noua m�rime"
-
-#: ../../network/ethernet.pm_.c:93
-#, fuzzy
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Pe ce port serie este conectat mouse-ul?"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "n'am g�sit nici o carte de re�ea"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Configura�ie re�ea"
-
-#: ../../network/ethernet.pm_.c:203
-#, fuzzy
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"V� rog intra�i numele calculatorului.\n"
-"Numele calculatorului ar trebui s� fie un nume �ntreg-calificat,\n"
-"ca de exemplu ``calculatorulmeu.laboratorulmeu.�ntreprindereamea.com''.\n"
-"Pute�i de asemenea intra adresa IP a pasarelei dac� ave�i una"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-#, fuzzy
-msgid "Host name"
-msgstr "Numele calculatorului:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Configura�ia re�elei"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Expert"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "What kind is your ISDN connection?"
-msgstr "La ce port serial este conectat mouse-ul?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Citirea configura�iei"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Citirea configura�iei"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-#, fuzzy
-msgid "ISDN Configuration"
-msgstr "Configura�ie"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Test de configura�ie"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-#, fuzzy
-msgid "Which protocol do you want to use ?"
-msgstr "Ce tip de parti�ie dori�i?"
-
-#: ../../network/isdn.pm_.c:199
-#, fuzzy
-msgid "What kind of card do you have?"
-msgstr "Ce tip de imprimanta ave�i?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-#, fuzzy
-msgid "ISA / PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-#, fuzzy
-msgid "PCI"
-msgstr "PCMCIA"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-#, fuzzy
-msgid "Continue"
-msgstr "Continua�i totu�i?"
-
-#: ../../network/isdn.pm_.c:216
-#, fuzzy
-msgid "Which is your ISDN card ?"
-msgstr "Care e zona dumneavoastr� orar�?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Pe ce port serial este conectat modemul dumneavoastr�?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Op�uni de telefonie"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nume de conexiune"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-#, fuzzy
-msgid "Phone number"
-msgstr "Num�r de telefon"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID de login"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Bazat-pe-un-script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Bazat-pe-un-terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-#, fuzzy
-msgid "Domain name"
-msgstr "Nume de conexiune"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Primul server DNS"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Al doilea server DNS"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Configura�ie re�ea"
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Pe ce disc dori�i s� schimba�i ?"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Nume de conexiune"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Pe ce disc dori�i s� schimba�i ?"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Nume de conexiune"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Configura�ie re�ea"
-
-#: ../../network/netconnect.pm_.c:50
-#, fuzzy
-msgid "Internet connection & configuration"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Configura�ie re�ea"
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr "Configura�ie re�ea"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configura�ia re�elei"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Alege�i noua m�rime"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detec�ia perifericelor..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Configura�ie re�ea"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Duplica�i pounctul de montaj %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "Cable connection"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, fuzzy
-msgid "LAN connection"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Alege�i unealta pe care dori�i s� o folosi�i"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Do you want to start the connection at boot?"
-msgstr "Doriti s� folosi�i aboot?"
-
-#: ../../network/netconnect.pm_.c:247
-#, fuzzy
-msgid "Network configuration"
-msgstr "Configura�ia re�elei"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Dori�i s� testa�i configura�ia ?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"V� rog intra�i configura�ia IP pentru acest calculator.\n"
-"Fiecare rubrica va trebui sa fie completat� ca o adres� IP �n format\n"
-"zecimal-punctat (de exemplu 192.168.1.55)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configura�ia c�r�ii de re�ea %s"
-
-#: ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "Server XFree86 : %s\n"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-#, fuzzy
-msgid "IP address"
-msgstr "Adres� IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-#, fuzzy
-msgid "Netmask"
-msgstr "Masc� de re�ea:"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP automat"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Adresa IP ar trebui s� fie �n formatul 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"V� rog intra�i numele calculatorului.\n"
-"Numele calculatorului ar trebui s� fie un nume �ntreg-calificat,\n"
-"ca de exemplu ``calculatorulmeu.laboratorulmeu.�ntreprindereamea.com''.\n"
-"Pute�i de asemenea intra adresa IP a pasarelei dac� ave�i una"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Server DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Periferic pasarel�"
-
-#: ../../network/network.pm_.c:381
-#, fuzzy
-msgid "Proxies configuration"
-msgstr "Configura�ie post-install"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy-ul ar trebui s� fie http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy-ul ar trebui s� fie ftp://..."
-
-#: ../../network/tools.pm_.c:39
-#, fuzzy
-msgid "Internet configuration"
-msgstr "Configura�ie proxy"
-
-#: ../../network/tools.pm_.c:40
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Dori�i s� testa�i configura�ia ?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Configura�ie re�ea"
-
-#: ../../network/tools.pm_.c:50
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Pe ce disc dori�i s� schimba�i ?"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Nume de conexiune"
-
-#: ../../network/tools.pm_.c:76
-#, fuzzy
-msgid "Connection Configuration"
-msgstr "Configura�ie proxy"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr ""
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-#, fuzzy
-msgid "Provider phone number"
-msgstr "Num�r de telefon"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "Op�iuni imprimant�"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "Op�iuni imprimant�"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Alege�i tastatura"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-#, fuzzy
-msgid "Dialing mode"
-msgstr "Nume de domeniu"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Nume de conexiune"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Nume de conexiune"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-#, fuzzy
-msgid "Account Login (user name)"
-msgstr "Punct de montaj"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-#, fuzzy
-msgid "Account Password"
-msgstr "Parola"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montare e�uat�: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Parti�iile extended nu sunt suportatet pe aceast� platform� "
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Ave�i o gaur� �n tabloul de parti�ii dar nu pot s� o folosesc.\n"
-"Singura solu�ie e s� deplasa�i parti�ia principal� pentru a avea gaura "
-"l�ng�parti�ia extins�"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restaurarea din fi�ierul %s a e�uat: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Backup defectuos"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Eroare la scrierea �n fi�ierul %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "trebuie avut"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "important"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "foarte simpatic"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "simpatic: "
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "poate"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Imprimant� local�"
-
-#: ../../printer.pm_.c:48
-#, fuzzy
-msgid "Remote printer"
-msgstr "Op�iuni pentru imprimanta lpd distant�"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Coad� distant�:"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "lpd distant:"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Op�iunea imprimantei NetWare"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Server de imprimant�"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Periferic imprimant�:"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Imprimant� local�"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Op�iuni pentru imprimanta lpd distant�"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Eroare la scrierea �n fi�ierul %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modul %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Adresa IP a serverului SMB"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Standard)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Cum e conectat� imprimanta ?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Configura�ie"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Coad� distant�:"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Adresa IP ar trebui s� fie �n formatul 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "Adresa IP a serverului SMB"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-#, fuzzy
-msgid "Port"
-msgstr "Slab"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configura�ie post-install"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Detec�ia perifericelor..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Test porturi"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Imprimant� local�"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Imprimant� local�"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Op�iuni pentru imprimanta lpd distant�"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Op�iuni pentru imprimanta lpd distant�"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Op�iuni pentru imprimanta lpd distant�"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Duplica�i pounctul de montaj %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Periferic imprimant�:"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Imprimant� local�"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Pe ce port serial este conectat modemul dumneavoastr�?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Periferic imprimant�:"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Configura�ie proxy"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instalarea pachetului  %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instalarea pachetului  %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Op�iuni pentru imprimanta lpd distant�"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"pentru a folosi a coad� de impresie lpd distant�, ave�i nevoie s� furniza�i\n"
-"numele calculatorului serverului de imprimant� �i lista de a�teptare"
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Numele calculator distant"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Op�iuni pentru imprimanta lpd distant�"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Numele calculator distant"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Numele calculator distant"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Op�iuni pentru imprimanta SMB/Windows 95/NT"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Pentru a imprima  pe o imprimant� SMB, ave�i nevoie s� furniza�i\n"
-"numele calculatorului SMB (acesta nu este �ntotdeauna numele ma�inii\n"
-"TCP/IP) si probabil adresa IP a serverului de imprimant�, c�t �i \n"
-"numele de access �i numele de utilizator, parola �i informa�ia grupului de "
-"lucru."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Numele serverului SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "Adresa IP a serverului SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Numele de access"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Numele de grup"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Op�iunea imprimantei NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Pentru a imprima pe o imprimant� NetWare, trebuie s� furniza�i\n"
-"numele serverului NetWare (nu e �ntotdeauna acela�i cu cel TCP/IP)\n"
-"c�t �i numele listei de a�teptare �i eventual utilizatorii care vor avea\n"
-"access �i parolele."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Server de imprimant�"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Lista de a�teptare a imprimantei"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Op�iunea imprimantei NetWare"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Op�iuni imprimant�"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Op�iuni imprimant�"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-#, fuzzy
-msgid "Printer Device URI"
-msgstr "Periferic imprimant�:"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-#, fuzzy
-msgid "Name of printer"
-msgstr "Imprimant� local�"
-
-#: ../../printerdrake.pm_.c:1006
-#, fuzzy
-msgid "Description"
-msgstr "Specifica�i op�iunile"
-
-#: ../../printerdrake.pm_.c:1007
-#, fuzzy
-msgid "Location"
-msgstr "Informa�ie"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Op�iuni pentru imprimanta lpd distant�"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "E corect ?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Op�iuni pentru imprimanta lpd distant�"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Ce tip de imprimanta ave�i?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configura�ie modem"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configura�ie proxy"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Dori�i s� testa�i imprimarea ?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Test porturi"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Da, imprim� am�ndou� paginile de test"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Imprimant�"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Programator"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Imprimarea pagin(ei/lor) de test"
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Imprimarea pagin(ei/lor) de test"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Imprimarea pagin(ei/lor) de test"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Imprimarea pagin(ei/lor) de test"
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Pagin(a/ile) de test a/au fost trimis� la procesul de impresie.\n"
-"Aceasta va dura pu�in timp �naintea pornirii imprim�rii\n"
-"Starea Imprim�rii:\n"
-"%s\n"
-"\n"
-"Func�ioneaz� cum trebuie?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Pagin(a/ile) de test a/au fost trimis� la procesul de impresie.\n"
-"Aceasta va dura pu�in timp �naintea pornirii imprim�rii\n"
-"Func�ioneaz� cum trebuie?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Imprimant� local�"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Mouse USB"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Oprire re�ea"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Oprire re�ea"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Op�iuni imprimant�"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configura�ie proxy"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Imprimant� local�"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Configura�ia imprimantei"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Configura�ie re�ea"
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configura�ie re�ea"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor nu a fost �nc� configurat"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Configura�ie re�ea"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Ce tip de parti�ie dori�i?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Ridicat"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoiac"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Ce tip de parti�ie dori�i?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Ce tip de parti�ie dori�i?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configura�ia imprimantei"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instalarea pachetului  %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Op�iuni imprimant�"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Configura�ia imprimantei"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Dori�i s� configura�i o imprimant�?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Imprimant�"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Iat� urm�toarele cozi de imprimare\n"
-"Pute�i s� ad�uga�i altele sau s� modifica�i cele existente."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Iat� urm�toarele cozi de imprimare\n"
-"Pute�i s� ad�uga�i altele sau s� modifica�i cele existente."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Configura�ie re�ea"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Dori�i s� testa�i configura�ia ?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configura�ie modem"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Dori�i s� testa�i configura�ia ?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Imprimarea pagin(ei/lor) de test"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Dori�i s� testa�i configura�ia ?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Op�iuni pentru imprimanta lpd distant�"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Op�iuni pentru imprimanta lpd distant�"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Imprimant� local�"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Dori�i s� testa�i configura�ia ?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Op�iuni pentru imprimanta lpd distant�"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Configura�ie post-install"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Slab"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Proxy-ul ar trebui s� fie http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Proxy-ul ar trebui s� fie ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Belgian"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Parola"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Nici o parol�"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Parolele nu corespund"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nu pot ad�uga parti�ia la md%d _formatat_RAID"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nu pot scrie fi�ierul %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid a e�uat"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid a e�uat (poate v� lipsesc raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nu ave�i destule parti�ii pentru nivelul RAID %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron un orar de comand� periodic�"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd e folosit pentru a monitoriza bateria �i login-ul via syslog.\n"
-"Poate de asemenea fi folosit pentru oprirea calculatorului dac� bateria e\n"
-"slab�."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Demareaz� comenzi programate de comanda at la timpul specificat la\n"
-"demararea lui at �i lanseaz� comenzi batch atunci c�nd media de �nc�rcare\n"
-"e suficient de sc�zut�."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron e un program UNIX standard care demareaz� programe-utilizator\n"
-"specificate la intervale periodice. vixie cron adaug� o serie "
-"defunc�ionalit��i la bazicul cron UNIX, printre care o mai bun� securitate "
-"�i\n"
-"op�iuni de configura�ie mai avansate."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM adaug� suport mouse la aplica�ii text Linux ca Midnight Commander.\n"
-"El permite de asemenea opera�ii cu mouse-ul de copiere/lipire �i include\n"
-"suportul meniurilor contextuale �n consol�."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache e un server World Wide Web. E folosit pentru a servi fi�iere HTML\n"
-"�i CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Super-procesul Internet (numit �n mod normal inetd) demareaz� o sumedenie\n"
-"de servicii, incluz�nd telnet, ftp, rsh �i rlogin. Dezactivarea lui telnet\n"
-"dezactiveaz� toate serviciile de care e responsabil."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Acest pachet �ncarc� harta de tastatur� selectat� ca �n\n"
-"/etc/sysconfig/keyboard. Aceasta poate fi selectat� folosind kbdconfig.\n"
-"Ar trebuie s�-l l�sa�i activat pentru majoritatea calculatoarelor."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd este procesul de imprimare necesar pentru ca lpr s� func�ioneze corect.\n"
-"E un server care arbitreaz� activitatea imprimantei(lor)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) e un Server de Nume de Domeniu (DNS) care e folosit la\n"
-"rezolvarea adreselor IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monteaz� �i demonteaz� toate punctele de montaj a Fi�ierelor sistem de "
-"Re�ea\n"
-"(NFS), SMB (LanManager/Windows �i NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activeaz�/Dezactiveaz� toate interfe�ele de re�ea configurate pentru fi\n"
-"ini�ializate la demaraj."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS e un protocol popular pentru a �mp�r�i fi�iere de-a lungul re�elelor\n"
-"TCP/IP. Acest serviciu furnizeaz� func�ionalitatea server-ului NFS, care e\n"
-"configurat� via fi�ierului /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS e un protocol popular pentru a �mp�r�i fi�iere de-a lungul re�elelor\n"
-"TCP/IP. Acest serviciu furnizeaz� func�ionalitatea bloc�rii fi�ierelor NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Suportul PCMCIA e destinat pentru a suporta cartele ethernet �i modem-uri\n"
-"laptop-uri. Nu va demara dec�t dac� e configurat deci nu e nici o problem�\n"
-"dac� e instalat pe calculatoare care nu au nevoie de acesta."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper-ul gestioneaz� conexiunile RPC, care sunt folosite de "
-"protocoluri\n"
-"ca NFS �i NIS. Server-ul portmap trebuie demarat pe calculatoare care \n"
-"func�ioneaz� ca servere pentru protocoluri care folosesc mecanismul RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix est un Agent de Transport de Mail (MTA), care e programul care\n"
-"permite deplasarea mail-ului de la un calculator la altul."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Salveaz� �i restaureaz� entropia sistemului pentru o mai mare calitate\n"
-"a gener�rii de numere aleatoare."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Serviciul de rutaj permite actualizarea automat� a tabloului IP de rutaj\n"
-"via\n"
-" protocolului RIP. �n timp de RIP este folosit pentru re�ele mici,\n"
-"alte protocoluri mai complexe sunt folosite pentru re�ele mai complexe."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protocolul rstat permite utilizatorilor unei re�ele s� recupereze\n"
-"performan�ele metrice de la orice calculator de pe re�ea."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"'Protocolul rusers permite utilizatorilor unei re�ele s� identifice\n"
-"cine e conectat la calculatoarele care au r�spuns."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protocolul rwho permite utilizatorului s� recupereze lista tuturor\n"
-"utilizatorului conecta�i la un calculator care folose�te procesul rwho\n"
-"(similar cu finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog e facilitatea pe care multe procese o folosesc pentru a scrie\n"
-"mesaje de log �n numeroaselor fi�iere de log ale sistemului. E o idee\n"
-"bun� s� demara�i �ntotdeauna syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Demareaz� �i opre�te Server-ul de caractere X la demararea �i\n"
-"oprirea calculatorului."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Alege�i ce servici dori�i s� fie lansate automat la demaraj"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Imprimant�"
-
-#: ../../services.pm_.c:123
-#, fuzzy
-msgid "Internet"
-msgstr "Interesant"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Mouse Systems"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Op�iuni pentru imprimanta lpd distant�"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Server de imprimant�"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "periferic: "
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Avertisment"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Append"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Root"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Meniu de Start"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sector"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Test de configura�ie"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Interesant"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedia"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-#, fuzzy
-msgid "Development"
-msgstr "Programator"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Nume de conexiune"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Interesant"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Numele serverului SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-#, fuzzy
-msgid "Games"
-msgstr "Gnome"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "expert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "indispensabil"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalarea pachetului  %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nu pot citi tabloul de parti�ii, e prea deteriorat dup� mine :(\n"
-"Voi �ncerca s� continui �terg�nd parti�iile gre�ite"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Eroare"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Configura�ie post-install"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configura�ie post-install"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Felicit�ri!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalare"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Ad�uga�i un utilizator"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatarea fi�ierului loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Selectarea grupurilor de pachete"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "V� rog alege�i pachetele pe care dori�i s� le instala�i"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "�terge coada"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Numele utilizatorului"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "V� rog, alege�i tipul de mouse?"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "�ncerca�i din nou"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "�ncerca�i din nou"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Nici o parol�"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Alege�i tastatura."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "V� rog face�i clic pe o parti�ie"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "V� rog alege�i pachetele pe care dori�i s� le instala�i"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "V� rog, alege�i tipul de mouse?"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Configura�ie re�ea"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Numele utilizatorului"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "V� rog alege�i pachetele pe care dori�i s� le instala�i"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "V� rog, alege�i o limb�."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Sa folosesc optimiz�rile penrtu disc dur?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Sa folosesc optimiz�rile penrtu disc dur?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "A�teptare"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "nivel"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "nivel"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Op�iuni pentru module:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Configura�ia re�elei"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "V� rog alege�i pachetele pe care dori�i s� le instala�i"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "V� rog alege�i pachetele pe care dori�i s� le instala�i"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Instalarea fi�ierelor sistem"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Informa�ie"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Pe ce port serial este conectat modemul dumneavoastr�?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Configura�ia re�elei"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "V� rog, alege�i tipul de mouse?"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Restaureaz� din dischet�"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "V� rog, alege�i tipul de mouse?"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Alt tip"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instalarea sistemului"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Restaureaz� din fi�ierul"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Restaureaz� din fi�ierul"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Personalizat"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "Ajutor"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Meniu de Start"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Restaureaz� din fi�ierul"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Text"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Alege pachetele de instalat"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "V� rog, alege�i o limb�."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "V� rog, alege�i o limb�."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "V� rog, alege�i o limb�."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "�nregistreaz� �n fi�ierul"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "V� rog, alege�i tipul de mouse?"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "V� rog alege�i pachetele pe care dori�i s� le instala�i"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Configura�ia re�elei"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Configura�ia re�elei"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Configura�ie"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Configura�ie"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Instalarea fi�ierelor sistem"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalarea lui %s a e�uat. Urm�toarea eroare a ap�rut:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "n'am g�sit %s "
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Gata"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formateaz� dischet�"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Preg�tesc instalarea"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "limiteaz�"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatarea parti�iilor"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Dezinstalarea RPM-urilor"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Configura�ie"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Punct de montaj"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Alege�i parti�iile pe care dori�i sa le formata�i"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Birou"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Imprimant�"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instalarea sistemului"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Selec�ioneaz� fi�ierul"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Op�iuni pentru imprimanta lpd distant�"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalare"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Ie�ire din instalare"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-#, fuzzy
-msgid "Internet Connection Sharing"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-#, fuzzy
-msgid "disable"
-msgstr "Tabel"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "reconfigure"
-msgstr "Configura�i X"
-
-#: ../../standalone/drakgw_.c:146
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Detec�ia perifericelor..."
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "enable"
-msgstr "Tabel"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Interesant"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor nu a fost �nc� configurat"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Configura�ie post-install"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Configura�ie modem"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "Adresa IP a serverului SMB"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-#, fuzzy
-msgid "Firewalling configuration detected!"
-msgstr "Citirea configura�iei"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:340
-#, fuzzy
-msgid "Configuring..."
-msgstr "Configura�ia IDE"
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:378
-#, fuzzy, c-format
-msgid "Problems installing package %s"
-msgstr "Instalarea pachetului  %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configura�ia re�elei"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-#, fuzzy
-msgid "Profile: "
-msgstr "montare e�uat�: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-#, fuzzy
-msgid "Hostname: "
-msgstr "Numele calculatorului:"
-
-#: ../../standalone/draknet_.c:168
-#, fuzzy
-msgid "Internet access"
-msgstr "Interesant"
-
-#: ../../standalone/draknet_.c:181
-#, fuzzy
-msgid "Type:"
-msgstr "Tip: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Pasarel�:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-#, fuzzy
-msgid "Interface:"
-msgstr "Interesant"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Configura�ia serviciilor"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Configura�ie"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Driver"
-msgstr "Server"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Interface"
-msgstr "Interesant"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Meniu de Start"
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Configura�ie re�ea"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Test de configura�ie"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Nume de conexiune"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Not connected"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Configura�ie"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Activ"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Activ"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Selecta�i Conexiunea de imprimant�"
-
-#: ../../standalone/draknet_.c:597
-#, fuzzy
-msgid "Connection type: "
-msgstr "Nume de conexiune"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Pasarel�"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Alegerea nivelului de securitate"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Nume de conexiune"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Alege�i unealta pe care dori�i s� o folosi�i"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Canadian (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandez"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "serie"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Alege�i tastatura."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "Alege�i o alt� rezolu�ie"
-
-#: ../../standalone/livedrake_.c:25
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Schimba�i Cd-Rom-ul!\n"
-"\n"
-"V� rog introduce�i Cd-Rom etichetat \"%s\" �i apoi ap�sa�i Ok.\n"
-"Dac� nu-l ave�i, ap�sa�i Anuleaz� pentru a evita instalarea de pe acest Cd-"
-"Rom."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-#, fuzzy
-msgid "/File/_New"
-msgstr "Fi�iere:\n"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-#, fuzzy
-msgid "/File/-"
-msgstr "Fi�iere:\n"
-
-#: ../../standalone/logdrake_.c:108
-#, fuzzy
-msgid "/_Options"
-msgstr "Informa�ie"
-
-#: ../../standalone/logdrake_.c:109
-#, fuzzy
-msgid "/Options/Test"
-msgstr "Informa�ie"
-
-#: ../../standalone/logdrake_.c:110
-#, fuzzy
-msgid "/_Help"
-msgstr "Ajutor"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Numele utilizatorului"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Test porturi"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-#, fuzzy
-msgid "search"
-msgstr "Caut�"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "formatare"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-#, fuzzy
-msgid "Choose file"
-msgstr "Alege�i ac�iunea"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-#, fuzzy
-msgid "Content of the file"
-msgstr "Nume de conexiune"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, fuzzy, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Preg�tesc instalarea"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Configura�ie"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "shadow"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "Interesant"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatare"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Configura�ie proxy"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-#, fuzzy
-msgid "Save as.."
-msgstr "Meniu de Start"
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "V� rog, alege�i tipul de mouse?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "n'am g�sit nici un serie_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulare 3 Butoane?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Alege�i o carte grafic�"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Periferic de demaraj"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Citirea configura�iei"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Citirea configura�iei"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Alege�i limba"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Alege�i tipul de instalare"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detec�ia discului dur"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configura�ie mouse"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Alege�i tastatura"
-
-#: ../../steps.pm_.c:19
-#, fuzzy
-msgid "Security"
-msgstr "c�rlion�at"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Instalarea fi�ierelor sistem"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatarea parti�iilor"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Alege pachetele de instalat"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalarea sistemului"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Ad�uga�i un utilizator"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configura�ie re�ea"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configura�ia serviciilor"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instala�i un gestionar de demaraj"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Crea�i un floppy de demaraj"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configura�i X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instalarea sistemului"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Ie�ire din instalare"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Eroare la citirea  %s pentru a scrie: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Configura�ia re�elei"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Preg�tesc instalarea"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Op�iunea imprimantei NetWare"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Birou"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Informa�ie"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Informa�ie"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Informa�ie"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Dori�i s� testa�i configura�ia ?"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documenta�ie"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Configura�ie proxy"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Configura�ie"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Informa�ie"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Op�iunea imprimantei NetWare"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Documenta�ie"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Interesant"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Informa�ie"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Montaj"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Nici unul"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Alege�i noua m�rime"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Op�iuni pentru imprimanta lpd distant�"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Pute�i furniza acum op�iunile modulului %s."
-
-#~ msgid "mount failed"
-#~ msgstr "montare e�uat�"
-
-#~ msgid "Low"
-#~ msgstr "Sc�zut"
-
-#~ msgid "Medium"
-#~ msgstr "Mediu"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "C�teva amelior�ri pentru acest nivel de securitate, principalul fiind c�\n"
-#~ "am introdus mai multe mesaje de avertisment �i verific�ri."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Multimedia"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Expert"
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Pute�i selecta acum zona orar� �n func�ie de locul unde tr�i�i.\n"
-#~ "\n"
-#~ "\n"
-#~ "Linux trateaz� ora �n format GMT sau \"Greenwich Mean Time\" �i-l "
-#~ "traduce\n"
-#~ "�n or� local� �n func�ie de zona orar� aleas�."
-
-#, fuzzy
-#~ msgid "Connect to Internet"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Configura�ie re�ea"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Pe ce disc dori�i s� schimba�i ?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "V� rog alege�i pachetele pe care dori�i s� le instala�i"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Info"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Informa�ie"
-
-#, fuzzy
-#~ msgid "authentification"
-#~ msgstr "Autentificare"
-
-#, fuzzy
-#~ msgid "user"
-#~ msgstr "Numele utilizatorului"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "V� rog, alege�i tipul de mouse?"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Automontare automat� a perifericelor extractibile"
-
-#~ msgid "Active"
-#~ msgstr "Activ"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Nu"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "O imprimant�, modelul \"%s\", a fost detact� �n"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Periferic local de imprimant�"
-
-#~ msgid "Printer Device"
-#~ msgstr "Periferic imprimant�:"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Coad� distant�:"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Coad� distant�:"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Mouse Systems"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Alt tip"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Alege�i tastatura."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "V� rog face�i clic pe o parti�ie"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tip: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Backup defectuos"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Configura�i X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Periferic imprimant�:"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Anuleaz�"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Ok"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Mouse USB"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "Root"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "Configura�ie re�ea"
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "Configura�ie re�ea"
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "Pe ce disc dori�i s� schimba�i ?"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Alege�i m�rimea pe care vre�i s� o instala�i"
-
-#~ msgid "Total size: "
-#~ msgstr "M�rime total�: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Astepta�i, v� rog"
-
-#~ msgid "Total time "
-#~ msgstr "Timp total "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "S� folosesc configura�ia existent� pentru X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "La ce periferic a�i conectat imprimanta  \n"
-#~ "(nota�i c� /dev/lp0 e echivalent cu LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid "New"
-#~ msgstr "Nou"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "�terge"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "V� rog face�i clic pe o parti�ie"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Alegerea obi�nuit� este \"/dev/hda\" pentru un disc maestru principal "
-#~ "IDE\n"
-#~ "sau \"/dev/sda\" pentru primul disc SCSI."
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Ambiguitate (%s), fi�i mai precis\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (din oficiu %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Ce alege�i ? (din oficiu %s  enter `niciuna' pentru niciuna) "
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Dori�i s� testa�i configura�ia ?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Dori�i s� testa�i configura�ia ?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Dori�i s� testa�i configura�ia ?"
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Alege�i noua m�rime"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "V� rog, alege�i tipul de mouse?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Alege�i limba pentru instalare �i folosirea sistemului."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Alege�i dispozi�ia tastaturii din lista de mai sus"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Selectare:\n"
-#~ "\n"
-#~ "  - Personalizat: Dac� sunte�i destul de familiar cu GNU/Linux, pute�i\n"
-#~ "    atunci s� alege�i utilizarea principal� a calculatorului. Vezi mai "
-#~ "jos\n"
-#~ "    pentru detalii.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: Aceasta presupune c� sunte�i foarte familiar cu  GNU/Linux "
-#~ "�i\n"
-#~ "    dori�i s� face�i o instalare foarte personalizat�. Ca �i pentru "
-#~ "clasa\n"
-#~ "    \"Personalizat\", ve�i putea s� selecta�i utilizarea sistemului\n"
-#~ "    dumneavoastr�.\n"
-#~ "    Dar v� rog, NU ALEGE�i ACEASTA DEC�T DAC� �TI�I CE FACE�I!."
-
-#, fuzzy
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "\t* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "\t  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "\t  will then have a complete collection of software installed in order "
-#~ "to compile, debug and format source code,\n"
-#~ "\t  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "\t  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Diferitele posibilit��i pentru utilizarea calculatorului (furnizate, "
-#~ "deci, dac�\n"
-#~ "a�i ales \"Personalizat\" sau \"Expert\" la clasa de instalare) sunt \n"
-#~ "urm�toarele:\n"
-#~ "\n"
-#~ "  - Normal: alege�i aceasta dac� dori�i s� folosi�i calculatorul pentru\n"
-#~ "    utilizare zilnic� (munca de servici, manipula�ii grafice, etc). Nu "
-#~ "v�\n"
-#~ "    a�tepta�i la nici un compilator, utilitare de programare �i altele\n"
-#~ "\n"
-#~ "  - Programare: cum numele-l indic�. Alege�i acesta dac� dori�i s� ave�i\n"
-#~ "    un calculator �n principal pentru programare. Ve�i avea atunci o "
-#~ "colec�iecomplet�\n"
-#~ "    instalat� pentru a compila, deboga �i formata cod surs� sau crea \n"
-#~ "    pachete software.\n"
-#~ "\n"
-#~ "  - Server: alege�i aceasta pentru a instala Mandrake Linux �i "
-#~ "inten�iona�i    s�-l folosi�i ca server. Acesta poate fi server de "
-#~ "fi�iere (NFS sau SMB),\n"
-#~ "    sau server de imprimant� (Unix' lp (Line Printer) protocol sau "
-#~ "imprimare \n"
-#~ "stil Windows SMB, server de autentificare (NIS), server de baze de date, "
-#~ "etc.\n"
-#~ "Deci nu v� a�tepta�i la programe de genul KDE, GNOME...\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Pute�i acum s� selecta�i grupul pachetelor pe care vre�i s� le instala�i\n"
-#~ "sau actualiza�i.\n"
-#~ "DrakX va verifica dac� ave�i destul spa�iu pentru a le instala pe toate."
-#~ "Dac� nu, v� va avertiza despre asta. Dac� dori�i s� continua�i oricum,\n"
-#~ "va continua instalarea a tuturor grupurilor selectate dar va l�sa\n"
-#~ "deoparte c�teva pachete de mai pu�in interes. La baza listei pute�i s�\n"
-#~ "selecta�i op�iunea \"Selectarea individual� a pachetelor\"; �n acest caz\n"
-#~ "va trebui va trebui s� parcurge�i mai mult de 1000 de pachete..."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Dac� ave�i toate CD-urile din lista de mai sus face�i clic pe Ok.\n"
-#~ "Dac� nu ave�i nici unul din aceste Cd-uri, face�i clic pe Anuleaz�.\n"
-#~ "Dac� numai c�teva din aceste Cd-uri lipsesc, de-selecta�i-le �i apoi Ok."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Pute�i intra op�iunile de telefonie. Dac� nu sunte�i sigur de ceea ce\n"
-#~ "trebuie s� intra�i, �ntreba�i ISP-ul dumneavoastr�."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Intrare;\n"
-#~ "\n"
-#~ " - Adres� IP: dac� nu �ti�i care e, �ntreba�i administratorul de re�ea "
-#~ "sauFurnizorul de Acces Internet (ISP).\n"
-#~ "\n"
-#~ "\n"
-#~ " - Masc� de re�ea: \"255.255.255.0\" e �n general cea corect�. Dac� nu\n"
-#~ "sunte�i sigur, �ntreba�i administratorul de re�ea sau ISP.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Dac� re�eaua dumneavoastr� folose�te NIS, selecta�i \"Folose�te NIS\". "
-#~ "Dac�\n"
-#~ "nu �ti�i exact, �ntreba�i administratorul de re�ea."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Pute�i intra op�iunile de telefonie. Dac� nu sunte�i sigur de ceea ce\n"
-#~ "trebuie s� intra�i, �ntreba�i ISP-ul dumneavoastr�."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Dac� folosi�i servere proxy, configura�i-le acum. Dac� nu �ti�i dac� ar\n"
-#~ "trebuie s� folosi�i un proxy, �ntreba�i administratorul de re�ea sau ISP-"
-#~ "ul."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Pute�i instala pachetul criptografie dac� conexiunea Internet a fost\n"
-#~ "realizat� corect. Alege�i mai �nt�i un sit Internet oglind� pentru a\n"
-#~ "recupera pachetele �i selecta�i pachetele de instalat.\n"
-#~ "\n"
-#~ "Nota�i c� va trebui s� alege�i aceste pachete criptografice "
-#~ "corespunz�toare\n"
-#~ "legisla�ie dumneavoastr�."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Alege�i parola pentru utilizatorul administrator al sistemului Linux.\n"
-#~ "Parola trebuie �nscris� de dou� ori pentru a se asigura c� sunt "
-#~ "identice.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root e utilizatorul administrator al sistemului �i singurul autorizat\n"
-#~ "pentru a modifica configura�ia sistemului. Deci alege�i cu aten�ie "
-#~ "aceast�\n"
-#~ "parol�! Utilizarea neautorizat� a acestui cont poate fi foarte\n"
-#~ "periculoas� pentru integritatea sistemului, pentru informa�iilor "
-#~ "con�inute\n"
-#~ "�i pentru celelalte calculatoare conectate la el. Aceast� parol� trebuie "
-#~ "s�\n"
-#~ "fie un amestec de caractere alfanumerice �i de cel pu�in 8 caractere. Nu-"
-#~ "l\n"
-#~ "scrie�i NICIODAT� pe ceva �i nu-l face�i prea lung sau prea greu de "
-#~ "re�inut."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Pute�i crea acum unul sau mai multe conturi de utilizator \"obi�nuite\",\n"
-#~ "�n opozi�ie cu contul \"privilegiat\" al utilizatorului root. Pute�i\n"
-#~ "crea unul sau mai multe conturi pentru fiecare persoan� autorizat� s�\n"
-#~ "se conecteze la calculator. Nota�i c� fiecare cont utilizator va avea\n"
-#~ "propriile preferin�e (configura�ie grafic�, parametrii de programe, "
-#~ "etc.)\n"
-#~ "�i propriul dosar personal �n \"/home\" unde toate aceste preferin�e vor "
-#~ "fi\n"
-#~ "stocate.\n"
-#~ "\n"
-#~ "\n"
-#~ "Mai �nt�i crea�i un cont pentru dumneavoastr�! Chiar dac� ve�i fi "
-#~ "singurul\n"
-#~ "utilizator al calculatorului, NU TREBUIE S� V� CONECTA�I CA ROOT PENTRU\n"
-#~ "SCOPURI ZILNICE LA SISTEM: pentru motive securitate. �n plus, un sistem\n"
-#~ "poate u�or deveni inutilizabil prin ap�sarea unei taste gre�ite.\n"
-#~ "\n"
-#~ "\n"
-#~ "�n consecin��, ar trebuie s� v� conecta�i la sistem folosind contul \n"
-#~ "utilizatorului pe care l-a�i creat aici �i s� folosi�i contul root\n"
-#~ "numai pentru administra�ie �i scopuri de depanare."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Principalele op�iuni ale lui LILO �i grub sunt:\n"
-#~ " - Periferic de boot: parametreaz� numele perifericului (e.g. o parti�ie\n"
-#~ "a unui disc dur) care con�ine sectorul de demaraj. �n mod normal e vorba\n"
-#~ "de \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Timp de a�teptare �nainte de a demara imaginea din oficiu: Specific�\n"
-#~ "num�rul de zecimi de secund� pentru a a�tepta �naintea demar�rii primei\n"
-#~ "imagini. Acesta e foarte practic pentru sistemele care demareaz� de pe\n"
-#~ "disc dur  dup� activarea tastaturii. Gestionarul de demaraj nu a�teapt�\n"
-#~ "deloc dac� sec�iunea \"delay\" e omis� sau dac� e fixat� la zero.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Mod Video: Aceasta specific� modul text VGA care ar trebui selectat "
-#~ "la\n"
-#~ "demaraj. Urm�toarele op�iuni sunt valabile:\n"
-#~ "    * normal: selecta�i normal pentru un mod text de 80x25.\n"
-#~ "    * <num�r>:  folosi�i modul text corespunz�tor."
-
-#, fuzzy
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "LILO (de la LInux LOader) �i Grub sunt gestionare de demaraj. Am�ndoi "
-#~ "sunt\n"
-#~ "capabili s� demareze Linux sau un alt sistem prezent �n calculator.\n"
-#~ "�n mod normal, aceste alte sisteme de operare sunt detectate �i "
-#~ "instalate\n"
-#~ "corect. Dac� cumva nu e cazul, pute�i ad�uga o intrare manual �n acest\n"
-#~ "ecran. Ave�i grij� s� alege�i parametrii cei buni.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pute�i de asemenea s� interzice�i accesul acestor alte sisteme a altor \n"
-#~ "utilizatori, caz �n care ar trebui s� �terge�i intr�rile acestor "
-#~ "sisteme.\n"
-#~ "�n acest ultim caz �ns�, ve�i avea nevoie de un floppy de demaraj pentru\n"
-#~ "a putea le demara!"
-
-#, fuzzy
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Principalele op�iuni ale lui LILO �i grub sunt:\n"
-#~ " - Periferic de boot: parametreaz� numele perifericului (e.g. o parti�ie\n"
-#~ "a unui disc dur) care con�ine sectorul de demaraj. �n mod normal e vorba\n"
-#~ "de \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Timp de a�teptare �nainte de a demara imaginea din oficiu: Specific�\n"
-#~ "num�rul de zecimi de secund� pentru a a�tepta �naintea demar�rii primei\n"
-#~ "imagini. Acesta e foarte practic pentru sistemele care demareaz� de pe\n"
-#~ "disc dur  dup� activarea tastaturii. Gestionarul de demaraj nu a�teapt�\n"
-#~ "deloc dac� sec�iunea \"delay\" e omis� sau dac� e fixat� la zero.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Mod Video: Aceasta specific� modul text VGA care ar trebui selectat "
-#~ "la\n"
-#~ "demaraj. Urm�toarele op�iuni sunt valabile:\n"
-#~ "    * normal: selecta�i normal pentru un mod text de 80x25.\n"
-#~ "    * <num�r>:  folosi�i modul text corespunz�tor."
-
-#, fuzzy
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Acum e momentul s� configura�i Sistemul X Windows, care e inima "
-#~ "interfa�ei\n"
-#~ "grafice din Linux (Linux GUI de la Linux Graphical User Interface). �n\n"
-#~ "acest scop trebuie s� configura�i cartea video �i monitorul. Majoritatea\n"
-#~ "acestor etape sunt automatizate; deci s-ar putea ca tot ceea ce ve�i "
-#~ "avea\n"
-#~ "de f�cut va consista �n verificarea �i acceptarea parametrilor :)\n"
-#~ "\n"
-#~ "C�nd a�i terminat cu configura�ia, X va fi re-demarat (dar poate �i ve�i\n"
-#~ "cere lui DrakX s� nu o fac�) pentru a verifica dac� noii parametrii v�\n"
-#~ "convin. Dac� nu v� convin, va pute�i �ntoarce �i s�-i schimba�i de c�te "
-#~ "ori\n"
-#~ "e necesar."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Dac� ceva nu e �n regul� cu configura�ia X, folosi�i aceste op�iuni "
-#~ "pentru\n"
-#~ "a configura �n mod corect Sistemul X Windows."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Dac� prefera�i s� folosi�i un login �n mod grafic, selecta�i \"Da\" �i \n"
-#~ "\"Nu\" �n cel�lalt caz."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Sistemul dumneavoastr� e pe cale s� re-demareze.\n"
-#~ "\n"
-#~ "Dup� re-demaraj, noul sistem Mandrake Linux sa va lansa automat. Dac� "
-#~ "dori�i\n"
-#~ "s� demara�i un alt sistem de operare existent, v� rog citi�i "
-#~ "instruc�iunile\n"
-#~ "adi�ionale."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Scrie /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formateaz� tot"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Dup� formatarea tuturor parti�iilor,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "toate datele din aceste parti�ii vor fi pierdute"
-
-#~ msgid "Reload"
-#~ msgstr "Re�ncarc�"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Dori�i s� crea�i un floppy pentru o instalare automat� de replicare?"
-
-#~ msgid "Remote queue"
-#~ msgstr "Coad� distant�:"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Standard"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#, fuzzy
-#~ msgid "Adapter"
-#~ msgstr "Actualizare"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Configura�ie re�ea"
-
-#, fuzzy
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Configura�ie re�ea"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Mouse USB"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Da, imprim� o pagin� de test ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Da, imprim� o pagina de test Postscript"
-
-#~ msgid "Paper Size"
-#~ msgstr "M�rimea h�rtiei"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Ejectarea paginei dup� lucru?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Op�iuni pilot Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Op�iuni pentru culori:"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Imprim� text ca Postscript"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Repar� efectul de scar� al textului"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Num�r de pagini"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Marginile Dreapta/St�nga �n puncte (1/72 inci)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Marginile Sus/Jos �n puncte (1/72 inci)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Op�iuni Gostscript suplimentare"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Op�inuni Text suplimentare"
-
-#~ msgid "Reverse page order"
-#~ msgstr "incerseaz� ordinea paginilor"
-
-#, fuzzy
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Selecta�i Conexiunea de imprimant�"
-
-#, fuzzy
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Fiecare coad� (la care activit��ile de imprimare sunt trimise) are "
-#~ "nevoie\n"
-#~ "de un nume (adesea lp) �i de un directoriu de spool asociat. Ce nume\n"
-#~ "�i directoriu dori�i s� utiliza�i pentru aceast� coad� �i cum e "
-#~ "conectat�imprimanta?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Fiecare coad� (la care activit��ile de imprimare sunt trimise) are "
-#~ "nevoie\n"
-#~ "de un nume (adesea lp) �i de un directoriu de spool asociat. Ce nume\n"
-#~ "�i directoriu dori�i s� utiliza�i pentru aceast� coad� �i cum e "
-#~ "conectat�imprimanta?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Numele cozii:"
-
-#~ msgid "Spool directory"
-#~ msgstr "Dosar de Spool:"
-
-#, fuzzy
-#~ msgid "Disable"
-#~ msgstr "Tabel"
-
-#, fuzzy
-#~ msgid "Enable"
-#~ msgstr "Tabel"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "montare e�uat�: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Pentru a crea un sistem �nc� �i mai sigur, ar trebui s� alege�i "
-#~ "\"Folose�te\n"
-#~ "un fi�ier shadow\" �i \"Folose�te parole MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Dac� re�eaua dumneavoastr� folose�te NIS, selecta�i \"Folose�te NIS\". "
-#~ "Dac�\n"
-#~ "nu �ti�i exact, �ntreba�i administratorul de re�ea."
-
-#~ msgid "yellow pages"
-#~ msgstr "Pagini galbene"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Configura�ie"
-
-#, fuzzy
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Pe ce disc dori�i s� schimba�i ?"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Selec�ioneaz� fi�ierul"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Configura�ie re�ea"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Configura�ia IDE"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Configura�ie: Adaug� localizare"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr ""
-#~ "Acest script de demaraj �ncearc� s� �ncarce modulele pentru mouse-ul\n"
-#~ "dumneavoastr� usb."
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "Configura�ie post-install"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Dependen�e automate"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Configura�ie LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Crea�i o dischet� de demaraj"
-
-#~ msgid "Choice"
-#~ msgstr "Alegere "
-
-#, fuzzy
-#~ msgid "gMonitor"
-#~ msgstr "Monitor"
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Pute�i alege acum diferite op�iuni pentru sistemul dumneavoastr�.\n"
-#~ "\n"
-#~ "  - Folose�te optimiz�ri pentru disc dur: aceast� op�iune poate ameliora\n"
-#~ "performan�ele discului dur dar e rezervat numai utilizatorilor avansa�i:\n"
-#~ "problemele cu unele microprocesoare port distruge datele, deci sunte�i\n"
-#~ "avertizat. Kernel-ul con�ine o list� neagr� a discurilor �i a "
-#~ "microproce-\n"
-#~ "soarelor, dar dac� vre�i s� elimina�i orice surpriz� nu selecta�i "
-#~ "aceast�\n"
-#~ "op�iune.\n"
-#~ "\n"
-#~ "  - Alege nivelul de securitate: pute�i alege nivelul de securitate "
-#~ "pentru\n"
-#~ "sistemul dumneavoastr�. V� referi�i-v� la manual pentru o informa�ie "
-#~ "complet�.\n"
-#~ "Pe scurt: dac� nu sunte�i sigur, alege�i \"Mediu\", dac� dori�i un\n"
-#~ "calculator securizat, alege�i \"Paranoiac\" dar ave�i grij�: �N ACEST "
-#~ "NIVEL\n"
-#~ " DE SECURITATE, LE LOGIN �N CALITATE DE ROOT NU E AUTORIZAT DIRECT! "
-#~ "Pentru \n"
-#~ "a deveni root, va trebui s� v� conecta�i ca utilizator normal �i apoi s�\n"
-#~ "folosi�i comanda \"su\". �n plus, nu v� a�tepta�i s� ave�i altceva dec�t\n"
-#~ "un server. A�i fost avertizat.\n"
-#~ "\n"
-#~ "  - Precizeaz� RAM-ul dac� e necesar: din p�cate, �n lumea actual� a\n"
-#~ "calculatoarelor personale, nu exist� o metod� standard pentru a consulta\n"
-#~ "BIOS-ul cu privire la RAM-ul prezent �n calculator dumneavoastr�. Din\n"
-#~ "aceast� cauz�, Linux poate e�ua la detectarea RAM-ului �n mod corect. "
-#~ "Dac�\n"
-#~ "acesta e cazul, pute�i specifica aici cantitatea exact�. Nota�i c� o\n"
-#~ "diferen�� de 2 sau 4Mb e normal�.\n"
-#~ "\n"
-#~ "  - Auto-montaj des media extractibile: dac� prefera�i s� nu monta�i "
-#~ "manual\n"
-#~ "�n mod manual aceste periferice (CD-ROM, Floppy, Zip) cu ajutorul \n"
-#~ "comenzilor \"mount\" �i \"umount\", selecta�i aceast� op�iune.\n"
-#~ "\n"
-#~ "  - Activeaz� Numlock la demaraj: dac� dori�i s� activa�i NumLock la\n"
-#~ "demaraj selecta�i aceast� op�iune (Nota�i c� Numlock poate sau s�\n"
-#~ "func�ioneze �n) mod grafic, X)."
-
-#, fuzzy
-#~ msgid "Internet/Network access"
-#~ msgstr "Interesant"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Diverse"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "�ntreb�ri diverse"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Nu pot s� folosesc supermount �n nivelul de securitate ridicat"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Primul server DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Al doilea server DNS"
-
-#, fuzzy
-#~ msgid "using module"
-#~ msgstr "Nume de domeniu"
-
-#, fuzzy
-#~ msgid "Development, Database"
-#~ msgstr "Programator"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Ce gestionar de demaraj dori�i s� folosi�i ?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Floppy pentru instalare automat�"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "S� caut un modem?"
-
-#, fuzzy
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "Configura�ie re�ea"
-
-#, fuzzy
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Configura�ie re�ea"
-
-#, fuzzy
-#~ msgid "Configure local network"
-#~ msgstr "Configura�ie re�ea"
-
-#, fuzzy
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr "Re�eaua LAN a fost deja configurat�. Dori�i s� :"
-
-#, fuzzy
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Configura�ia IDE"
-
-#, fuzzy
-#~ msgid "KDE"
-#~ msgstr "IDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#, fuzzy
-#~ msgid "Internet Tools"
-#~ msgstr "Configura�ie proxy"
-
-#, fuzzy
-#~ msgid "Development C/C++"
-#~ msgstr "Programator"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Configura�ia zonei orare"
-
-#, fuzzy
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Op�iunea imprimantei NetWare"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(poate cauza deteriorarea datelor)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Activeaz� num lock la demaraj"
-
-#, fuzzy
-#~ msgid "Confirm Password"
-#~ msgstr "Parola"
-
-#~ msgid "DNS server:"
-#~ msgstr "Server DNS:"
-
-#~ msgid "Gateway device:"
-#~ msgstr "Periferic pasarel�:"
-
-#~ msgid "default"
-#~ msgstr "standard"
-
-#, fuzzy
-#~ msgid "What is your system used for?"
-#~ msgstr "Care e folosin�a sistemului dumneavoastr�?"
-
-#, fuzzy
-#~ msgid "Select the size you want to install"
-#~ msgstr "Alege�i m�rimea pe care vre�i s� o instala�i"
-
-#~ msgid "Customized"
-#~ msgstr "Personalizat"
-
-#, fuzzy
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Sunte�i sigur ca sunte�i un expert?\n"
-#~ "Ei, nu-i glum�, ve�i putea face lucruri serioase dar periculoase aici."
-
-#~ msgid "Use shadow file"
-#~ msgstr "Folose�te un fi�ier shadow"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Folose�te parole MD5"
-
-#~ msgid "Package"
-#~ msgstr "Pachet"
-
-#~ msgid "Tree"
-#~ msgstr "Arbore"
-
-#~ msgid "Sort by"
-#~ msgstr "Triaz� �n func�ie de"
-
-#~ msgid "Category"
-#~ msgstr "Categorie"
-
-#~ msgid "Installed packages"
-#~ msgstr "Pachete instalate"
-
-#~ msgid "Available packages"
-#~ msgstr "Pachete disponibile"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Afi�a�i numai foile"
-
-#~ msgid "Expand all"
-#~ msgstr "Expandeaz� tot"
-
-#~ msgid "Collapse all"
-#~ msgstr "Reduce tot"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Adaug� localizarea pachetelor"
-
-#~ msgid "Update location"
-#~ msgstr "Actualizare localizare"
-
-#~ msgid "Find Package"
-#~ msgstr "Caut� Pachetul"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Caut� pachetul con�in�nd fi�ierul"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Basculeaz� �ntre Instalare �i Disponibil"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Verificare dependen�e"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Pachetele urm�toare urmeaz� s� fie dezinstalate"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Ce pachet c�uta�i ?"
-
-#~ msgid "No match"
-#~ msgstr "Nici unul"
-
-#~ msgid "No more match"
-#~ msgstr "Nici o alt� ocuren��"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake e actualmente �ntr-un mod ``memorie joas�''.\n"
-#~ "Voi re-lansa rpmdrake pentru a permite c�utarea fi�ierelor"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Ce fi�ier c�uta�i ?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Ce c�uta�i ?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Da�i-mi un nume (ex: `extra', `comercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Directoriu"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Nici un Cd-rom disponibil (nimic �n /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL-ul directoriului care con�ine RPM-urile"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Pentru FTP �i HTTP, ave�i nevoie s� da�i localizarea pentru hdlist\n"
-#~ "Aceasta trebuie s� fie relativ� la URL -ul de mai sus"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "V� rog furniza�i urm�toarea informa�ie"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s e deja folosit"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Actualizare bazei RPM-urilor"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Voi �terge intrarea %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "C�utare de foi"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "G�sirea foilor ia ceva timp"
-
-#, fuzzy
-#~ msgid "ECI modem"
-#~ msgstr "Expert"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (important)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (foarte simpatic)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (simpatic)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "La ce port serial este conectat mouse-ul?"
-
-#~ msgid "Czech"
-#~ msgstr "Ceh"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovac"
-
-#, fuzzy
-#~ msgid "Reconfigure local network"
-#~ msgstr "Reconfigura�i re�eaua"
-
-#, fuzzy
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Germany (1TR6)"
-#~ msgstr "German"
-
-#, fuzzy
-#~ msgid "What do you wish to do?"
-#~ msgstr "Ce dori�i s� face�i ?"
-
-#, fuzzy
-#~ msgid "Install/Rescue"
-#~ msgstr "Instalare"
-
-#, fuzzy
-#~ msgid "Rescue"
-#~ msgstr "Redimensioneaz�"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Ce tip de parti�ie dori�i?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Alege�i \"Instalare\" dac� nu exista alte versiuni de Linux instalate,\n"
-#~ "sau dac� dori�i s� folosi�i mai multe versiuni sau distribu�ii.\n"
-#~ "\n"
-#~ "Alege�i \"Actualizare\" dac� dori�i s� actualiza�i o versiune\n"
-#~ "precedent� Mandrake Linux:\n"
-#~ "%s or %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Selectare:\n"
-#~ "\n"
-#~ "  - Automatizat: Dac� n'a�i mai instalat Linux niciodat�, alege�i "
-#~ "aceasta.\n"
-#~ "NOT�:\n"
-#~ "    re�eaua nu va fi configurat� �n timpul instal�rii, folosi�i\n"
-#~ "    \"LinuxConf\" pentru a o configura dup� ce instalarea s'a terminat.\n"
-#~ "\n"
-#~ "  - Personalizat: Dac� sunte�i destul de familiar cu GNU/Linux, pute�i\n"
-#~ "    atunci s� alege�i utilizarea principal� a calculatorului. Vezi mai "
-#~ "jos\n"
-#~ "    pentru detalii.\n"
-#~ "\n"
-#~ "  - Expert: Aceasta presupune c� sunte�i foarte familiar cu  GNU/Linux "
-#~ "�i\n"
-#~ "    dori�i s� face�i o instalare foarte personalizat�. Ca �i pentru "
-#~ "clasa\n"
-#~ "    \"Personalizat\", ve�i putea s� selecta�i utilizarea sistemului\n"
-#~ "    dumneavoastr�.\n"
-#~ "    Dar v� rog, NU ALEGE�i ACEASTA DEC�T DAC� �TI�I CE FACE�I!.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "�n acest punct, ve�i putea alege parti�iile pentru a instala sistemul\n"
-#~ "Mandrake Linux dac� acestea au fost deja definite (dintr-o alt� "
-#~ "instalare\n"
-#~ "prealabil� a unui sistem Linux sau cu ajutorul unui program "
-#~ "departi�ionare). �n celelalte cazuri, parti�iile vor trebui s� fie "
-#~ "create.\n"
-#~ "Aceast� opera�ie consist� �n divizarea logic� a capacit��ii discului dur\n"
-#~ "�n arii separate pentru utilizare.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dac� ave�i nevoie s� crea�i noi parti�ii, folosi�i \"Auto alocare\" \n"
-#~ "pentru o creare automat� de parti�ii Linux. Pute�i selecta discul pentru\n"
-#~ "parti�ionare f�c�nd clic pe \"hda\" pentru primul disc IDE, \"hdb\" \n"
-#~ "pentru al doilea sau \"sda\" pentru primul disc SCSI �i a�a mai departe.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dou� parti�ii obi�nuite sunt: parti�ia root (/), punctul de plecare\n"
-#~ "al ierarhiei sistemului de fi�iere �i /boot, care con�ine toate "
-#~ "fi�ierele\n"
-#~ "necesare pentru a demara sistemul de operare c�nd calculatorul e aprins.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pentru c� efectele acestui proces sunt �n mod uzual reversibile,\n"
-#~ "parti�ionarea poate fi intimidant� pentru un utilizator ne-experimentat.\n"
-#~ "De aceea DiskDrake simplific� pe c�t posibil acest proces. Consulta�i\n"
-#~ "documenta�ia �i nu v� gr�bi�i �nainte de a �ncepe.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pute�i accede la toate op�iunile cu ajutorul tastaturii: naviga�i "
-#~ "printre\n"
-#~ "parti�ii folosind tasta Tab �i tastele s�ge�i Sus/Jos. C�nd o parti�ie\n"
-#~ "e selectat�, pute�i folosi:\n"
-#~ "\n"
-#~ "- Ctrl-c  pentru a crea o nou� parti�ie (c�nd a parti�ie goal� e "
-#~ "selectat�)\n"
-#~ "\n"
-#~ "- Ctrl-d  pentru a �terge o parti�ie\n"
-#~ "\n"
-#~ "- Ctrl-m pentru a crea un punct de montaj\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Toate parti�iile care tocmai au fost definite trebuie s� fie formatate\n"
-#~ "�nainte de a fi utilizate. (formatare �nsemn�nd crearea fi�ierelor "
-#~ "sistem).\n"
-#~ "Poate dori�i s� reformata�i parti�ii pre-existente pentru a �terge \n"
-#~ "informa�iile con�inute.\n"
-#~ "Nota: nu este necesar s� formata�i parti�ii mai ales dac� dori�i s�\n"
-#~ "conserva�i informa�iile ce le con�in. Parti�ii de acest gen sunt:\n"
-#~ "/home �i /usr/local."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Pachetele selectate sunt acum pe cale de fi instalate. Aceast� opera�ie\n"
-#~ "ar trebui s� ia c�teva minute, excep�ie f�c�nd Actualizare unei "
-#~ "distribu�ii\n"
-#~ "precedente, caz �n care timpul va fi lung �nainte ca actualizarea s�\n"
-#~ "�nceap�."
-
-#, fuzzy
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Dac� DrakX nu a reu�it s� detecteze mouse-ul, sau dac� dori�i s� "
-#~ "verifica�i\n"
-#~ "ceea ce a f�cut, vi se va propune lista cu mouse-uri de mai sus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dac� sunte�i de acord cu propunerea lui DrakX, s�ri�i la sec�iunea "
-#~ "dorit�\n"
-#~ "cu un simple �n meniu din st�nga. Dac� nu, alege�i tipul de mouse care\n"
-#~ "crede�i c� se apropie mai mult de cel pe care-l ave�i.\n"
-#~ "\n"
-#~ "\n"
-#~ "�n cazul unui mouse de tip serie, ve�i putea specifica portul serie la\n"
-#~ "care e conectat."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Aceast� sec�iune este dedicat� configura�iei unei re�ele locale (LAN)\n"
-#~ "sau a unui modem.\n"
-#~ "\n"
-#~ "Alege�i \"Re�ea LAN\" �i DrakX va �ncerca s� detecteze adaptatorul\n"
-#~ "Ethernet pe care-l ave�i. Adaptatorii PCI sunt �n general detecta�i �i\n"
-#~ "ini�ializa�i �n mod automat.\n"
-#~ "�n cazul unui adaptator ISA, detec�ia automat� nu va func�iona �i ve�i\n"
-#~ "avea atunci de ales pilotul din lista propus�.\n"
-#~ "\n"
-#~ "\n"
-#~ "La fel �i pentru adaptatorii SCSI, pute�i l�sa testul mai �nt�i, dac� nu\n"
-#~ "pute�i specifica op�iunile pentru pilot pe care le-a�i recuperat �n \n"
-#~ "documenta�ia hardware-ului.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dac� instala�i sistemul Mandrake Linux pe un calculator care face parte\n"
-#~ "dintr-o re�ea deja existent�, administratorul de re�ea v� va da toate\n"
-#~ "informa�iile necesare (adres� IP, sub-masc� de re�ea sau netmask mai pe\n"
-#~ "scurt �i numele calculatorului). Dac� configura�i o re�ea privat� la\n"
-#~ "dumneavoastr� acas�, de exemplu, va trebui s� alege�i adresele singur.\n"
-#~ "\n"
-#~ "\n"
-#~ "Alege�i \"Telefona�i cu modem\" �i atunci conexiunea Internet va fi\n"
-#~ "configurat�. DrakX va �ncerca s� detecteze modemul �i dac� nu reu�e�te\n"
-#~ "v� va propune portul serie la care modemul e conectat."
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linux poate gera multe tipuri de imprimante. Fiecare din aceste tipuri\n"
-#~ "necesit� o instalare diferit�. Nota�i c� \"spool\"-ul de imprimant�\n"
-#~ "folose�te \"lp\" pentru numele din oficiu al imprimantei; deci va trebui\n"
-#~ "s� ave�i o imprimant� cu un acest nume; dar �i ve�i putea da mai multe "
-#~ "nume,\n"
-#~ "separate de caractere '|'. Deci, dac� dori�i s� ave�i unele nume mai "
-#~ "pline\n"
-#~ "de sens, ve�i putea folosi, de exemplu: \"Imprimanta mea|lp\".\n"
-#~ "Imprimanta care are are \"lp\" printre numele ei va fi considerat� ca\n"
-#~ "imprimanta din oficiu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dac� imprimanta e conectat� fizic la calculator, selecta�i atunci\n"
-#~ "\"Imprimant� local�\". Ve�i avea apoi a intra numele portului de\n"
-#~ "imprimant� la care aceasta e conectat� �i a selecta filtrul apropriat\n"
-#~ "Portul LPT1 devine lp0 �n Linux\n"
-#~ "\n"
-#~ "\n"
-#~ "Dac� dori�i s� accede�i la un calculator Unix distant, ve�i avea a "
-#~ "selecta\n"
-#~ "\"lpd distant\". Pentru a o face s� func�ioneze, nu ave�i nevoie de "
-#~ "parol�\n"
-#~ "sau de nume de utilizator, dar va trebui s� �ti�i care e numele cozii de\n"
-#~ "imprimare de pe acest server-ului.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dac� dori�i s� acede�i la o imprimant� SMB (adic� la o imprimant� "
-#~ "conectat�\n"
-#~ "fizic la un calculator distant cu un sistem Windows), va trebui s� \n"
-#~ "specifica�i numele ei SMB (care nu e numele ei TCP/IP) �i probabil "
-#~ "adresa\n"
-#~ "ei IP, plus numele utilizatorului, al grupului de lucru �i parola cerut�\n"
-#~ "pentru a accede la imprimant� �i bine�n�eles numele imprimantei. "
-#~ "Lucrurile\n"
-#~ "sunt similare pentru o imprimant� Netware, excep�ie f�c�nd faptul c� nu\n"
-#~ "ave�i nevoie de informa�ia de grup de lucru."
-
-#, fuzzy
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "E foarte indicat s� r�spunde�i \"Da\" aici. Dac� instala�i Microsoft \n"
-#~ "Windows mai t�rziu, acest a v� va �terge sectorul de demaraj al "
-#~ "discului.\n"
-#~ "Dac� nu ave�i un floppy de demaraj, nu ve�i mai putea demara Linux."
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Abandona�i schimb�rile?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Ce tip de mouse ave�i?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Rezolu�ii alese �n mod automat"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Pentru a afla rezolu�iile disponibile voi �ncerca altele diferite.\n"
-#~ "Ecranul dumneavoastr� se va stinge �i aprinde de c�teva ori..."
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Pot s� �ncerc s� g�sesc rezolu�iile disponibile (eg:800x600).\n"
-#~ "Uneori, totu�i, aceasta poate bloca calculatorul.\n"
-#~ "Dori�i s� �ncerc ?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "N'am g�sit moduri valide\n"
-#~ "�ncerca�i cu o alt� carte video sau alt monitor"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Configurarea automat� a rezolu�iilor"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Mouse Apple ADB"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Mouse Apple ADB (2 Butoane)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Mouse Apple ADB (3+ Butoane)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Mouse Apple USB"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Mouse Apple USB (2 Butoane)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Mouse Apple USB (3+ Butoane)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "Mouse ATI Bus"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Mouse Microsoft Bus"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Mouse Logitech Bus"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "Mouse USB (3 butoane sau mai multe)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A sau mai mult (serie)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (serie)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (serie)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (serie)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Mouse serie generic"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Mouse Microsoft compatibil (serie)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Mouse serie generic cu 3 butoane"
-
-#, fuzzy
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "montarea nfs a e�uat"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Criptografie"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Dori�i sa configura�i re�eaua LAN pentru sistemul dumneavoastr�?"
-
-#~ msgid "Show less"
-#~ msgstr "Afi�a�i mai pu�in"
-
-#~ msgid "Show more"
-#~ msgstr "Afi�a�i mai mult"
-
-#~ msgid "tie"
-#~ msgstr "cravat�"
-
-#~ msgid "brunette"
-#~ msgstr "brunet�"
-
-#~ msgid "girl"
-#~ msgstr "fat�"
-
-#~ msgid "woman-blond"
-#~ msgstr "femeie blond�"
-
-#~ msgid "automagic"
-#~ msgstr "automagic"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Care e dispozi�ia tastaturii?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "S� �ncerc s� g�sesc cartelele PCMCIA?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "S� �ncerc s� g�sesc periferice %s?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Dori�i sa configura�i o conexiune telefonic� prin modem?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "S� �ncerc s� g�sesc periferice PCI?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "�n c�utarea parti�iei root"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: Aceasta nu e o parti�ie root, v� rog alege�i o alta"
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "V� rog alege�i o parti�ie pentru a o folosi ca parti�ie root?."
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Nu ave�i destul spa�iu pentru Lnx4win"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# When possible cp437 accentuated letters can be used too.
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Bun venit la gestionarul de sisteme de operare LILO!\n"
-#~ "Pentru a lista posibilitatile, apasati <TAB>.\n"
-#~ "\n"
-#~ "Pentru a lansa unul dintre ele, scrietii numele si apasati <ENTER> sau\n"
-#~ "asteptati %d secunde pentru demararea din oficiu.\n"
-#~ "\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Bun venit la gestionarul de sisteme de operare SILO!\n"
-#~ "\n"
-#~ "Pentru a afisa diferitele posibilitati, apasati <TAB>.\n"
-#~ "\n"
-#~ "Pentru a demara unul dintre ele, scrieti-i numele si apasati <ENTER> sau\n"
-#~ "asteptati %d secunde pentru demararea din oficiu.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "Op�inunile principale ale lui SILO"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Iat� urm�toarele intr�ri din SILO.\n"
-#~ "Pute�i ad�uga mai multe sau schimba cele existente."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Aceast� etichet� e deja utilizat�"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Instalarea lui SILO a e�uat. Urm�toarea eroare a ap�rut:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX va �ncerca mai �nt�i s� caute unul sau mai mul�i adaptatori PCI\n"
-#~ "sau SCSI. Dac� c�utarea e fructuoas� �i �tie ce pilot s� foloseasc�,\n"
-#~ "atunci �l (le) va instala �n mod automat.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dac� adaptatorul este o carte ISA, sau est e o carte PCI �i DrakX\n"
-#~ "nu �tie ce pilot s� foloseasc� sau dac� nu ave�i nici un adaptator SCSI\n"
-#~ "ve�i fi mai apoi �ntrebat dac� ave�i unul sau nu. Dac� nu ave�i nici "
-#~ "unul\n"
-#~ "r�spunde�i \"Nu\". Dac� ave�i unul sau mai multe, r�spundeti \"Da\".\n"
-#~ "O list� cu pilo�i va va permite atunci s� alege�i unul.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dup� ce a�i selec�ionat pilotul, DrakX v� va �ntreba dac� dori�i\n"
-#~ "s� specifica�i op�iuni pentru el (ei). Mai �nt�i �ncerca�i �i l�sa�i\n"
-#~ "pilotul s� testeze hardware-ul: �n mod normal aceasta func�ioneaz� bine.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dac� nu, nu uita�i informa�iile despre hardware pe care le-a�i putea "
-#~ "g�si\n"
-#~ "�n documenta�ia dumneavoastr� sau din Windows (dac� l-ave�i instalat), "
-#~ "a�a\n"
-#~ "cum e sugerat �n ghidul de instalare. Acestea sunt op�iuni pe care le "
-#~ "ve�i\n"
-#~ "furniza pilotului."
-
-#~ msgid "Shutting down"
-#~ msgstr "Oprire"
-
-#~ msgid "useless"
-#~ msgstr "nefolositor"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "Am g�sit ceva caractere din windows.\n"
-#~ "Dori�i s� le folosi�i ? Asigura�i-v� ca ave�i dreptul s� le folosi�i\n"
-#~ "�n Linux."
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Alege�i \"Instalare\" dac� nu exista alte versiuni de Linux instalate,\n"
-#~ "sau dac� dori�i s� folosi�i mai multe versiuni sau distribu�ii.\n"
-#~ "\n"
-#~ "\n"
-#~ "Alege�i \"Actualizare\" dac� dori�i s� actualiza�i o versiune precedent�\n"
-#~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus),\n"
-#~ "6.1 (Helios), Gold 2000 or 7.0 (Air)."
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Dori�i s� utiliza�i LILO?"
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Alege�i alt CD de instalat"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Automated: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Selec�ioneaz�:\n"
-#~ "\n"
-#~ "  - Automatizat: Dac� nu a�i mai instalat niciodat� Linux, sau dac� "
-#~ "dori�i\n"
-#~ "s� instala�i distribu�ia aleas� \"Produsul anului\" �n anul 1999, face�i\n"
-#~ "clic aici.\n"
-#~ "\n"
-#~ "  - Personalizat: Dac� sunte�i obi�nuit cu Linux �i ve�i fi capabil s�\n"
-#~ "alege�i scopul sistemului instalat �ntre normal, progamator sau server.\n"
-#~ "Alege�i \"Normal\" pentru o utilizare general� a calculatorului. Pute�i\n"
-#~ "alege \"Programator\" dac� ve�i folosi calculatorul �n principal pentru\n"
-#~ "programare sau \"Server\" dac� dori�i s� instala�i un server general\n"
-#~ "(pentru mail, imprimare...)\n"
-#~ "\n"
-#~ "  - Expert: Dac� cunoa�te�i bine GNU/Linux �i dori�i s� alege�i un tip "
-#~ "de\n"
-#~ "instalare personalizabil� in cele mai mici detalii, selecta�i acest tip.\n"
-#~ "Ve�i fi capabil s� selecta�i destina�ia sistemului dumneavoastr� ca �i\n"
-#~ "pentru \"Personalizat\"."
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Instalare SCSI"
-
-#~ msgid "developer"
-#~ msgstr "programator"
-
-#~ msgid "beginner"
-#~ msgstr "�ncep�tor"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Dup� %s parti�ie %s,"
-
-#~ msgid "changing type of"
-#~ msgstr "schimb� tipul de"
-
-#~ msgid "resizing"
-#~ msgstr "redimensioneaz�"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Cantitatea: %s MB"
-
-#~ msgid "Password:"
-#~ msgstr "Parola:"
-
-#~ msgid "User name:"
-#~ msgstr "Numele utilizatorului:"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Alege�i Instalare sau Actualizare"
diff --git a/perl-install/share/po/ru.po b/perl-install/share/po/ru.po
deleted file mode 100644
index 1f8d41ac7..000000000
--- a/perl-install/share/po/ru.po
+++ /dev/null
@@ -1,13049 +0,0 @@
-# DrakX messages translations.
-# Copyright (C) 1999 MandrakeSoft.
-# Vladimir Choundalov <choundalovvv@point.pwp.ru>, 2001
-# Aleksey Smirnov <smi@logic.ru>, 1999-2000
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-11-23 10:07 +0200\n"
-"Last-Translator: Vladimir Choundalov <choundalovvv@point.pwp.ru>\n"
-"Language-Team: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=koi8-r\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "��������� ��� ������� ����������"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "������������ ���������� Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "����������������� ������ ����� \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "��������� ��� ���������� �������"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"���� ������� ������������ ��������� ��� ���������� �������.\n"
-"��� �� ������ �������?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "����������"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "�������� ����������"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "�������� X ������"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X ������"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "�������� X ������"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X ������"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "����� ������������ XFree �� ������ ��������?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"���� ���������� ����� ������������ ���������� 3D ���������, �� ������ � "
-"XFree %s.\n"
-"���� ���������� �������������� �������� XFree %s, ������� �������� ����� "
-"������������ 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "���� ���������� ����� ������������ ���������� 3D ��������� � XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s � ���������� 3D ����������"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"���� ���������� ����� ������������ ���������� 3D ��������� � XFree %s,\n"
-"�������� �������� - ��� ����������������� ��������� � �������� ��������� "
-"������ ����������."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s � ����������������� ���������� 3D ����������"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"���� ���������� ����� ������������ ���������� 3D ���������, �� ������ � "
-"XFree %s,\n"
-"�������� �������� - ��� ����������������� ��������� � �������� ��������� "
-"������ ����������.\n"
-"���� ���������� �������������� �������� XFree %s, �������, ��������, ����� "
-"������������ 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "��������� XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "�������� ������ ������ ����� ����������"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "�������� ����� ��� �������"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "�������� �������"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "�������"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"��� ����������� ��������� - ��� ������� ������������ ���������, ������� "
-"����\n"
-"������� ���������� ����� ������, � ��� ��� ������, ������� ��������������\n"
-"���������, ������� ���� ������� ������ ����� �� �����.\n"
-"\n"
-"��� ����� �����, ����� � ��������� �������� ������� ������������� �� "
-"���������\n"
-"��� ����������� ������������ ������ ��������: �� ������ ��������� �������.\n"
-" ���� ������������ - ����� �������� �������������� ���������."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "������� �������������� ���������"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "������� ������������ ���������"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "������� �� ��������"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "���������� ��� �� ���������"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "���������� ��� �� �������"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "������ �������������� ���������?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"��������������: ������������ ���� ���������� ����� �������� � ��������� "
-"����������"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "�������� ��������"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"���������� �������� ��������� ���������"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "��������� ������:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "���������� ����� %d ������"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "��� ��������� �����?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "��������� ������, ���������� �������� ��������� ���������"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "����������"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "����� ���������� � ������� �����"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "����������: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "������ XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "���"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "��"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "����� �������"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "�������� ���"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "����������"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "��������� ����������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "��� ����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "�������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "������� ���.����. ��������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "������� ����.����. ��������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "����������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "����������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "�����������: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "������� �����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "����������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "������ XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "������� XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "���������� �������� X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "��� �� ������ �������?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "������� �������"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "������� ����������"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "������� ����� �������"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "������� ����������"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "�������� ����������"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "��������� �����"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "�����"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"��������� ���������?\n"
-"������� ���������:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ��� ��������"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"����� ��������� ������� ��� ��������������� ������� X ����� ��������.\n"
-"������, ����� X ��������� ��� ������������?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "������� �������� � %s ��� ��������� ���������"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "�������, � ����� ����������� Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ������ (8 ���)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ������ ������ (15 ���)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ����� ������ (16 ���)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ��������� ������ (24 ����)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ��������� ������ (32 ����)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB ��� ������"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "����������� VGA, 640x480 ��� 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 ��� 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "���������� � 8514, 1024x768 ��� 87 Hz ����-�������� (��� 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ��� 87 Hz ����-��������, 800x600 ��� 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 ��� 60 Hz, 640x480 ��� 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 ��� 60 Hz, 800x600 ��� 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA ������� �������, 1024x768 ��� 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency ��������� ������������ 1280x1024 ��� 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency ��������� ������������ 1280x1024 ��� 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency ��������� ������������ 1280x1024 ��� 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor ��������� ������������ 1600x1200 ��� 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor ��������� ������������ 1600x1200 ��� 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "������ ������ ������������ �������"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "������ ������ ���������� (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "��������� SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "���� �� ������ ���������� ��������� ���������?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "��������� LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO � ��������� ����"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO � ����������� ����"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "����������� �� DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "������� ��������� ���������� ����������"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "����� ������������� ���������� ����������"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "��������� ���������� ����������"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "����������� ����������"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (�� �������� �� ������ BIOS)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "���������"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "���������"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "�����-�����"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "�������� ����� ��������� ������ �� ���������"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "������"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "������ (��� ���)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "���������� ��������� ��������� ������"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "����������"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "������� /tmp  ��� ������ ��������"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "������� ������ ������ RAM (������� %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "��������� ��������� ��������"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "������� ������ RAM � Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "����� ``���������� ����� ��������� ������'' �� ������������ ��� ������"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "���������� ��� ���"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "������ �� ���������"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "��������� ���������"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "�������� �������� Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "�������� �������� ����"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "�������� �������� � CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "�������� �������� OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "������������ ������� �� ���������?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"������� ��������� ������ �������.\n"
-"�� ������ �������� ���, ��� �������� ������������."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "��������"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "������"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "��������"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "����� ��� ������ �� ������ ��������?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "������ �� (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "������ �� (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "������ �� (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "�����"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "��������"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "������-������"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "�������"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "������������"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "�����"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "���������"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "������ Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "��� �������"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "������� �����"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "������ ����� �� �����������"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "� ��� ������ ���� ������ swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "��� ����� ��� ������������"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "������� %s %s ����������"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "���� �� � ��� ������?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "���� �� � ��� �����-���� %s ����������?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "���"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "��"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "��. �������� ������������"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "��������� �������� ��� %s ����� %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(������ %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "����� %s ������� ��� �����������?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"� ��������� ������� %s �������� ����� ��������� �������������� ����������,\n"
-"���� ������ ����� �� ���������. �� ������ �� �� ������ ��� ����\n"
-" �������������� ��������� ��� ��������� �������� �������������� ������\n"
-"� ������� ����������� ����������? ��������, ������������ �������� ���������, "
-"�� ��� \n"
-"�� ������� ������� �����������."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "���������"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "������� ���������"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"������ �� ������ �������� ��������� ��� ������ %s.\n"
-"��������� �������� � ������� ``���=�������� ���2=��������2 ...''.\n"
-"��������, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "��������� ������:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"�������� ������ %s ����������� ��������.\n"
-"������ ����������� ��� � ������� �����������?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(��� ��������� %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "���� ������ ������� �����"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "������� ��� ������������"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"��� ������������ ������ ��������� ����� ������ � ������ ��������, \n"
-"����� , `-' � `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "��� ��� ������������ ��� ���������"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "�������� ������������"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"������ ������������\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "������� ������������"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "��������� ���"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "���������������� ���"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "��������"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "�����������"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "����-����"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"����� ��������� ��� ��������� ��� ��������������� ����� ������ "
-"������������.\n"
-"���� �� �� ������ ������������ ���� ������������, ������� �� ������ ��������."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "�������� ������������ �� ���������:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "�������� �������� ���� ��� �������:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "�������, ����� ���� ������������."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "�� ������ ������� ������ �����, ������� ����� �������� ����� ���������"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "���"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "�������� ������������"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "�����������"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "����������� CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"���� ����� ������� ��������\n"
-"�� �������, ��� ������ �������� ��� �����?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "������"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "����� ���������� � Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "������"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "�����������"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "�������"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "�������"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "��������������"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"���� ������� ���� ������������ � �������������. ������� ����������\n"
-"����� � �������������, �� ����� ��������������: ���� ������� �� ������� "
-"������������\n"
-"�� �������, ������������ � ���� ��� � Internet. ���� �� ������� �������."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"������ ������ ��������, �� ������������� ���������� � �������� ��������\n"
-"��-�������� �� �������������."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"��� ����������� ������������, ������������� ��� ����������,\n"
-"��������������� � Internet � �������� �������. ��������� ����� ��������\n"
-"�� ������������."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"�� ���� ������ ������������ ���������� ��������� ������������� �������\n"
-"� �������� �������. ������������ ������ ���������� ������ ��� ������\n"
-"�������, ������������ ���������� �� ������� ���������."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"�� ������� ��������� ���������� ������ ������������, �� ������ ������� "
-"��������� �������.\n"
-"��������� ������������ ����������� �� ��������."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "������� ������������"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "��������� ������� ������������"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "�������� ����� ��� �������"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"����� ���������� %s ��������� ������������ �������!\n"
-"\n"
-"�������� ������������ ������� �� ������ ���\n"
-"��������� %d ������ ��� �������� �������, ��������� �� ���������.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "����� ���������� � GRUB, ��������� ������������ �������!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "����������� ������� %c � %c ��� ��������� ������."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "������� enter ��� �������� ��������� ��, 'e' ��� ��������������"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "������ ����� ���������, ��� 'c' ��� ������ ��������� ������."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "��������� ����� ����� �������� ������������� ����� %d ������."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "�� ������� ����� � /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "������� ����"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "��������� ����"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "���� �� ������ ���������� ��������� ���������?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "������� ���� �� �������.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "��������� ���� ��������"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_����"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/����/_�����"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "������� ��������� NewStyle"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle �������"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "������������ �������"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "������������ Gtk+ �������"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "��������� Aurora ��� ��������"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "����� Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "����� Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"� ������ ������ �� ����������� %s � �������� ��������� ��������.\n"
-"�������� ����� ��������� ��� ������� ������� ���������."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "���������"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "��������� �����"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "��������� X-Window ��� ������ ������"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "���, � �� ���� ������������ �������������� ���� � �������"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"��, � ���� ������������ �������������� ���� � ������� � ����� (user, desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "���������� ������� ��� ������ /etc/inittab : %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "Gb"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "Kb"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mb"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "Tb"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d �����"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 ������"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d ������"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "���������� ����� �������� ����������"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "�� ������ ������� ������ �����, ������� ����� �������� ����� ���������"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "�����������"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "�����������"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "��������"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "���������"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "����������"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "��������"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "�����������"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "����������������"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "������ ����� �������� ��������� ����� ������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "������� �����������!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"���� ���������� ������������ aboot, �������� ��������� ����� (2048 �������� "
-"����� ����������)\n"
-"� ������ �����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "�������� ��������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"� ��� ���� ������ ������� ������ FAT\n"
-"(������ ������������ MicroSoft Dos/Windows).\n"
-"��������� ������ ����� �������� ������ �������\n"
-"(�������� �� ����, � ����� �� \"�������� ������\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "���������� ������� �� ������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "�����������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "������ ������������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "�����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "���� �������� ������:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "�������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "���"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "������ ����� ����������� ``%s'' "
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "�������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "������� �������� ``�������������''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"����� ��������� ���� ������� %s, ��� ������ � ���� ������� ����� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "�������� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "������� ����� ������"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "������������ � ����� �������"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "������������ � ����� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "�����"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "���-���� ����������?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "����� ��� ����������"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "����� ��� ������ ������� ��������?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "������ �������������� ���������?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "���������� �������������"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "�������� ���"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "����������� �������� �����"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "��� ��������� ������� ��� ������������"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "���������� ����� �������� ����������"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"����� �������� ������ ��������, ������� ����, ����� �������� ����������� "
-"������� ���������� ������"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "�������� ������� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "�������� ������� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "�������� ������� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "�������� ������� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "���������������� ������� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "�������� ����"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"��������� ������� �������� ����� ����� ������ ������\n"
-"���-���� ����������?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "��������"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"�������� ������� � ��������\n"
-"��� ������ �� ���� ������� ����� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "������� ������������ ������� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "�������� ����������"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "����� ������������"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "���������"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "�������� ������"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "�����������"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "�������������"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "������������"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "�������� � RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "�������� � LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "�������������"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "������� �� RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "������� �� LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "�������� RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "������������ ��� loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "������� ����� ������"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "��������� ������: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "������ � MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "��� �������� �������: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "����� ������������:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "������������: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "�������������� ����� loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "�������� ��� �������"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "����� �������� ������� �� ������?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "���� �� ������ �������������� loopback ���� %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "���� �� ������ �������������� ���������� %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"�� ���� �������� ����� ������������, ��������� ���� ������ ������������ ��� "
-"loop back. ������� ������� loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "���������� ������ �������� ������� FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "��������� �������"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "������ ����� ������� ������ ��������"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "��� ���� ������ � ���� ������� ������ ���� ������� ��������� �����"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"����� ��������� ������� ������� %s ��� ������ � ���� ������� ����� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "������� ����� ������"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "������ � MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "�� ����� ���� ������ �����������?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "������"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "�� ����� ������ ������ �����������?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "�����������"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "����������� �������..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "�������� ������������ RAID ��� ����������"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "�����"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "�������� ������������ LVM ��� ����������"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "��� LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "���� ������ ������ ������������ ��� loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "��� ����� loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "��������� ���"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "���� ��� ������������ ������ loopback, �������� ������ ����."
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "���� ��� ����������. ������������ ���?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "��������� ������:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "����������"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "�������"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "������ chunk"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "���������: ��� �������� ������."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "����� ��� ��������� �� �������?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"��������, �� ������ ��������� /boot �� ����� (�� �������� > 1024).\n"
-"���� �� ����������� LILO - ����� ��� �� ����� ��������, ���� LILO �� "
-"������������, � ����� /boot �� �����."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"������, ��������� ���� ��� ���������� � �������� ��������� (/) ��������� "
-"���������� �����\n"
-"1024-�� �������� �������� �����, � � ��� ��� ������� /boot .\n"
-"���� ����� �������������� ��������� �������� LILO, �� �������� �������� "
-"������ /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"�� ������� ������ ������������ RAID � �������� ��������� (/).\n"
-"������� ��������� �� ������ ��� ���������� ��� ������� /boot.\n"
-"��� ��� �� �������� �������� ������ /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "������� �������� ���������� %s ����� �������� �� ����!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "����� ��������� �������������, ���������� ���������������"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"����� �������������� ������� %s, ��� ������ � ���� ������� ����� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "��������������"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "�������������� ����� loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "�������������� ������� %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid �� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "������������ ���������� ����� ��� ���������� ����� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "������������ ���������� ����� ��� ���������� ����� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "����������: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "����������: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "����� ��� DOS-�����: %s (������)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "���: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "���: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "������: ������ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "������: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ��������"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "� �������� %d �� ������� %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "���������������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "�� ���������������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "��������������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback ����(�): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"������, ����������� �� ���������\n"
-"    (��� �������� MS-DOS, �� ��� lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "������� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "������ �hunk %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "����� RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "��� ����� Loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"���� �����������, ��� ���� ������\n"
-"�������� �������� ��������, ��������,\n"
-"��� �� ������� ��� �������.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"���� ����������� Bootstrap\n"
-"������ ������������\n"
-"��� ����������� �������� ���� ��.������.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "������: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "���������: %s ���������, %s �������, %s ��������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "����������: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-����� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "��� ������� ��������: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "�� ���� %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "���������: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "��� �������� �������: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "���� ������ ������� ����� (��� ����� ������ ���� �� ����� %d ��������)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "������ �� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "�������� ��� �������"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "���������� ������� �� ������"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS ������"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ������ �������������� %s"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "�� ���� ��� ������������� %s � ����� %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "������ �������������� %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "�������"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "������"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "�� �� ������ ������������ JFS �� �������� ������ 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "�� �� ������ ������������ ReiserFS �� �������� ������ 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "����� ������������ ������ ���������� � /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "��� ���� ������ � ������ ������������ %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "�� �� ������ ������������ ���������� ��� LVM ��� ����� ������������ %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "��� ���������� ������ ���������� ������ �������� �������� �������"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"��� ���� ����� ������������ ����� �������� �������� ������� (ext2, "
-"reiserfs)\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "�� �� ������ ������������ ���������� ��� LVM ��� ����� ������������ %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "������������ ���������� ����� ��� ����-����������"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "������ �������� %s ��� ������: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"��������� ������: �� ������� ���������� ��� �������� ����� �������� ������. "
-"��������� ������������ ��� ��������� ��������� �������."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "� ��� �� ������� ������� ��������!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"���� ����������� ������������ ������� Linux, ������������ ��\n"
-"����� ������� �����. �� ������ �������� ���������, ��������� ��������, "
-"������ ��� �������� \n"
-". ���� �� �� ��������, �� ������ ��� �������� ������ �������� (root)\n"
-"������ (\"/\"). �� ������� ��� ������� ���������, ����� �� �� ������� "
-"���������� ��� ������ ��������� \n"
-". ���� �� ������ ������� ���� ������ �� ��������� ������� ��� �����,\n"
-"����������� ������� \"/home\" (��� �������� ���� � ��� ������, ����� � ��� "
-"����\n"
-"����� ������ ������� Linux).\n"
-"\n"
-"\n"
-"��� ������� - ������ ������ ����������� ��������� �������: \"���\", \"�������"
-"\".\n"
-"\n"
-"\n"
-"\"���\" ����������� ��������� �������: \"��� �������� �����\", \"����� "
-"�������� �����\",\n"
-"\"����� �������\" (��������, \"hda1\").\n"
-"\n"
-"\n"
-"\"��� �������� �����\" - \"hd\" ���� � ��� ������� ���� � IDE ����������� � "
-"\"sd\"\n"
-"���� ��� SCSI ����.\n"
-"\n"
-"\n"
-"\"����� �������� �����\" ��� ������ ����� ����� \"hd\" or \"sd\". ��� "
-"������� ������ IDE:\n"
-"\n"
-"   * \"a\" �������� \"master ���� �� ������ IDE �����������\",\n"
-"\n"
-"   * \"b\" �������� \"slave ���� �� ������ IDE �����������\",\n"
-"\n"
-"   * \"c\" �������� \"master ���� �� ������ IDE �����������\",\n"
-"\n"
-"   * \"d\" �������� \"slave ���� �� ������ IDE �����������\".\n"
-"\n"
-"\n"
-"��� ������� ������ SCSI, \"a\" �������� \"������ ����\", \"b\" �������� "
-"\"������ ����\", � �.�."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"������ �� ������ ������� �������, ������� ����� ����������� ��� ��������.\n"
-"\n"
-"\n"
-"����� �� �������� ���� �� �����, ����� �������� ��������� ��������� \n"
-"� ��������� ������� ����� �������.\n"
-"\n"
-"\n"
-"������ ����� ��������� �� ���� �����, ���� �� ���������� ������������ ���� "
-"������ � �������� �������: ��\n"
-"�������� �� �������� ��������� ������ �������. �������,\n"
-"��� ��������� ��������� ������� �� ������� �����������..\n"
-"� ��������, ���������� �������� ������ �� �������, ������� ��� ������� �����."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"� ���� ������ ��� ����� ������� ����� �� ����� ������� �����\n"
-"� ������� �� ������ ������������� Mandrake Linux. ���� �� ���� ���\n"
-"������������ ������������ ������� �������� ��� ��������� �����, ��� "
-"�����������\n"
-"������� ���� �� �������. �� ���� ��������� �� ������� ����������� � "
-"����������\n"
-"���������� ��������� ������������ � �������� ����� ��� ��������� Mandrake "
-"Linux.\n"
-"\n"
-"\n"
-"��������� ����� ��������� ������ ������ ��������� �������� ���������,\n"
-"��������� ����� ��������� ���������� � �������, ���� � ��� ������������ "
-"�����.\n"
-"���� ������ �������� ������� ���������. ������ ��� ������, ������� "
-"�����������\n"
-"� ���������� ��������.\n"
-"\n"
-"\n"
-"��� ����� �� ����� ���� ��������. ���� - ���������� ��� ������������ ������� "
-"� ������\n"
-"��� ����������� ������ (���������� ����� ������ �������� - Swap).\n"
-"\n"
-"\n"
-"���� ������� ��� ������� (�� ���������� ��������� ��� ������\n"
-"���������� ���������), ����� ��� ������ ����� �� ������� ��� ��������� "
-"�����\n"
-"Linux �������.\n"
-"\n"
-"\n"
-"���� ������� ��� �� �������, ��� ����������� �� �������. \n"
-"����� ��� �������, ����������� ������������� ������. � ����������� �� "
-"������������ ������ �������� \n"
-"�����, �������� ��������� �������:\n"
-"\n"
-"* ������������ ������������ ���������: ������ ��������� ���� ��� ��������� "
-"������������ �������� Linux �� ����� ������� �����. ��������\n"
-"  ���� �����, ���� �� ������ �� ������������. \n"
-"\n"
-"\n"
-"* �������� ���� ����: �������� ���� �����, ���� �� ������ ������� ��� "
-"���������� � ��� �������, ������������ �� ����� ������� ����� � �������� "
-"�� \n"
-"  ����� ����� Mandrake Linux ��������. ������ ��������� �������� ����� "
-"������� - ������������ ������ ����� ������������� ���������� ���� ��������\n"
-"  �� ��� �� �������.\n"
-"\n"
-"\n"
-"* ������������ ��������� ����� � ������� Windows: ���� � ��� ����������� "
-"Microsoft Windows � �������� ��� ����� �� ������� �����, �� ��� ��������\n"
-"  ������� ��������� ������������ ��� Linux. ����� ��� �������, �� ������ "
-"������� ���\n"
-"  ������ Microsoft Windows � ��� ������ (�������� ������ \"�������� ���� ����"
-"\" ��� \"����� �������\" ) ��� �������� ������\n"
-"  ������ ������� Microsoft Windows. ��� ��������� ����� ���� ��������� ��� "
-"������ ������. ��� ������� �������������\n"
-"  ���� �������� ������������ � Mandrake Linux � Microsoft Windows �� ����� � "
-"��� �� ����������.\n"
-"\n"
-"\n"
-"  ����� ������� ����� ��������, ��� ����� ������, ��� ������ ������� "
-"Microsoft\n"
-"  Windows ����� ������, ��� ������������. ��� ��������, ��� � ��� ����� "
-"������ ����� ��� \n"
-"  Microsoft Windows ��� �������� ���������� � ��������� ����� ��������.\n"
-"\n"
-"\n"
-"* ����� �������: �������� ���� �������, ���� �� ������ ������� ������� ��� "
-"������� ����. ������ ���������\n"
-"  . ���� ������� ����� ������, �� ����� �������. �� ������ ����� �������� "
-"��� ���� ������. �������\n"
-"  �� ��������� ���� �������, ���� �� �� ������� � ���, ��� �������."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"����� ������������ ��� �������� �������, ������� ���� ������ ����������, "
-"��� \n"
-"������ ���� ��������������� (�������������� �������� �������� �������� "
-"�������).\n"
-"\n"
-"\n"
-"� ������ ������ �� ������ ����������������� � ��� ������������ ������� ����� "
-"�������\n"
-"������������ �� ��� ����������. ���� �� ������ ��� �������, �������� ����� "
-"�������,\n"
-"������� �� ������ ���������������.\n"
-"\n"
-"\n"
-"������ �����, ��� ������������� ����������������� ��� ����� ������������ "
-"�������.\n"
-"�� ������ ����������������� �������, ���������� ������������ ������� (����� "
-"��� \"/\",\n"
-"\"/usr\" ��� \"/var\"), �� ��� ������������� �� ������� ��� ��������, "
-"����������  ����������,\n"
-"������� �� ������ ��������� (������ ��� ������ /home).\n"
-"\n"
-"\n"
-"������ ��������� ��� ������ ��������, ��� ��� ����� �������������� ��� "
-"���������� �����\n"
-"������� ��� ����������� ��������������.\n"
-"\n"
-"\n"
-"������� �� \"OK\" ��� �������������� ��������.\n"
-"\n"
-"\n"
-"������� �� \"������\", ���� �� ������ ������� ������ ������� ��� ��������� \n"
-"Mandrake Linux."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"� ������ ������ �������������� ��������� ����� ����� ������������ ������� "
-"Mandrake Linux\n"
-". ��� �������� ������ ��������� ����� (����� ������� �� ���������� ������� "
-"���������\n"
-"� �������� ������ ����������).\n"
-"\n"
-"\n"
-"����������, ���������."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"� ���� ������ ��� ����� �������, ����� ������(�) \n"
-"������������ ��� ��������� ����� ����� Mandrake Linux �������. ���� �������\n"
-"��� ������� (�� ����� ���������� ��������� GNU/Linux ��� ������\n"
-"���������� ���������), �� ������ ������������ ������������ �������. �� ���� "
-"������ �������,\n"
-"������� �������� ����� ������ ���� ������.\n"
-"\n"
-"\n"
-"����� ������� �������, ������� ��� ����� ������� ������� ����. ������� ���� "
-"��� \n"
-"��������� �� ������, ����� \"hda\" ��� ����� �� ������ IDE ������, \"hdb\" "
-"��� �����\n"
-"�� ������ IDE ������, ���� \"sda\" ��� ������� SCSI ����� � ��� �����.\n"
-"\n"
-"\n"
-"��� ��������� ���������� �������� �����, �� ������ ������� ��������:\n"
-"\n"
-"   * �������� ���: ���� ������� ������� ��� �������, ������������ �� "
-"��������� ������� �����.\n"
-"\n"
-"\n"
-"   * �������������� ����������: ��� ������� ��������� ������������� ������� "
-"������� Ext2 � �������� (swap) � ��������� (����������) ������������ "
-"������ \n"
-"     �������� �����.\n"
-"\n"
-"\n"
-"   * ������������ ������� ��������: � ���� ������ �� ������ ���������� "
-"������������ ����  ������� ��������, ���� ��� ����������. ������\n"
-"     ��������� � �������, ��� ������� ����� ����������� ��������.\n"
-"\n"
-"\n"
-"   * �����: ���� ����� �� ������ ������������ ��� ������ ��������� ���� "
-"���������.\n"
-"\n"
-"\n"
-"   * �������������: ���� ����� �� ������ ������� ��� ������ ���� ��������� � "
-"�������� ����� �������� (��������������) ������� ��������\n"
-"\n"
-"\n"
-"   * ������: �������� ���� �����, ���� �� ������ ������������ ���������-"
-"������ ��� ��������� ������ �������� �����. �������������, ���� � ���\n"
-"     ��������� ���� � ��������� ������ �� �������.\n"
-"\n"
-"\n"
-"   * �������������� � �������: ������ ���� �����, �� ������ ������������ "
-"������� ��������, ���� �� �� ��������� �� �����\n"
-"     ���������� ���������.\n"
-"\n"
-"\n"
-"   * ��������� �� �������: �������� ���� �����, ����� ��������� ������� "
-"�������� �� �������. ��� ����  ��� ����������� ������������ �� �����\n"
-"     . ������������ ������������� ������������ ���� �����\n"
-"\n"
-"\n"
-"   * ���������: �������� ���� �����, ����� �� ��������� ��������� drive, "
-"����� ��������� ��������� ���������.\n"
-"\n"
-"\n"
-"�� ������ ������� � ������ ������ ������ � ����������: ������� ����� "
-"��������� �������������� � ������� ������  Tab � ������� �����/����.\n"
-"\n"
-"\n"
-"����� ������ ������, �� ������ ������������:\n"
-"\n"
-"           * Ctrl-c ��� �������� ������ ������� (����� ������ ������ "
-"������)\n"
-"\n"
-"           * Ctrl-d ��� �������� �������\n"
-"\n"
-"           * Ctrl-m ��� ������� ����� ������������\n"
-"           \n"
-"\n"
-"           \n"
-"���� �� ���������� ��������� �� ���������� PPC, ��������, �� �������� "
-"������� ��������� HFS 'bootstrap' ������ �� ����� 1MB ��� ������������� ���\n"
-"��������� ����������� yaboot. ���� �� ������ ������� ������ ������� ������, "
-"�������� 50MB, �� ������ ������������ ��� ����� ��� \n"
-"�������� ���� � ������ ramdisk ��� ������� ��������� ��������."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"�� ����� ������� ����� ���������� ����� ������ ������� Microsoft Windows\n"
-". �������� ������, ������ �������� �� ������ �������� ��� ���������\n"
-"����� ����� ������������ ������� Mandrake Linux.\n"
-"\n"
-"\n"
-"��� ������� - ������ ������ ����������� ��������� �������: \"��� Linux\", "
-"\"���\n"
-"Windows\" \"�������\".\n"
-"\n"
-"\"��� Linux\" ����������� ��������� �������: \"��� �������� �����\", \"����� "
-"�������� �����\",\n"
-"\"����� �������\" (��������, \"hda1\").\n"
-"\n"
-"\n"
-"\"��� �������� �����\" - \"hd\", ���� � ��� ������� ���� � IDE ����������� � "
-"- \"sd\"\n"
-"���� ��� SCSI ����.\n"
-"\n"
-"\n"
-"\"����� �������� �����\" ��� ������ ����� ����� \"hd\" or \"sd\". ��� "
-"������� ������ IDE:\n"
-"\n"
-"   * \"a\" �������� \"master ���� �� ������ IDE �����������\",\n"
-"\n"
-"   * \"b\" �������� \"slave ���� �� ������ IDE �����������\",\n"
-"\n"
-"   * \"c\" �������� \"master ���� �� ������ IDE �����������\",\n"
-"\n"
-"   * \"d\" �������� \"slave ���� �� ������ IDE �����������\".\n"
-"\n"
-"\n"
-"��� ������� ������ SCSI, \"a\" �������� \"������ ����\", \"b\" �������� "
-"\"������ ����\", � �.�.\n"
-"\n"
-"\n"
-"\"��� Windows\" - ��� �����, ������������ ��� ������� ���� � Windows (������ "
-"���� \n"
-"��� ������ ���������� \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "���������. ���������� ���� �������� ����� ������ ��������� �����."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"����������, �������� \"���������\", ���� � ��� �� ���� ����������� "
-"���������� ������ Mandrake Linux\n"
-"��� �� ������ ������������ ��������� ������������ ������.\n"
-"\n"
-"\n"
-"����������, �������� \"����������\", ���� �� ������ �������� ��� "
-"������������� ������  Mandrake Linux.\n"
-"\n"
-"\n"
-"� ����������� �� ������ ����� � GNU/Linux, �� ������ ������� ���� �� "
-"��������� ������� ��������� ��� ���������� �����\n"
-"������������� ������� Mandrake Linux:\n"
-"\n"
-"* �������������: ���� �� ����� ������� �� ������������� ������������ ������ "
-"GNU/Linux �������� ����. ��������� �����\n"
-"  ����� ������� � ��� ����� ������ ����� ��������� ��������.\n"
-"\n"
-"\n"
-"* ����������: ���� �� ���������� ������� � GNU/Linux, �� ������ ������� "
-"������� ���������� (������� �������, ������,\n"
-"  ���������� ��������) ����� �������. ��� ����� ������ ������ ��������, ��� "
-"� �������� ��������� \"�������������\" \n"
-"  �������, ������� ��� ����� �����, ��� �������� GNU/Linux ����� ������� "
-"���� ������� ���������.\n"
-"\n"
-"\n"
-"* �������: ���� �� ��������� �������� �������� � GNU/Linux, �� ������ "
-"������� ���� ������� ���������. ��� � � ������ \"����������\",\n"
-"  �� ������� ������� ������� ���������� (������� �������, ������, ���������� "
-"��������). ������ �����\n"
-"  ��������� � ������ ����� ������ ���������. � ��� �� ������ ����������� "
-"����� ������ ��������� �������� ���������.\n"
-"  �������� �� ��������� �������, �� ������� �������� �������� � GNU/Linux, "
-"����� ���� ����� ������.  ������� �� ��������� ���� ������� ���������,\n"
-" ���� �� �� ������� � ���, ��� �������."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"�������� ���������� ����. ��������, COM1\n"
-"���� � MS Windows ���������� ttyS0 � GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader - ��������� Linux) � Grub �������� ������������ "
-"��������:\n"
-"��� �������� ��������� GNU/Linux ��� ����� ������ ��, ������������� �� "
-"������.\n"
-"������ ��� ������ ������������ ������� ��������� ������������ � "
-"���������������.\n"
-"���� ����� �� ���������, �� ������ �������� ����� ������� �� ���� ������.\n"
-"������ ����������� ��� ������� ����������.\n"
-"\n"
-"\n"
-"�������� �����, ��� �� �� ������ ������ ������ ������ � ���� ��, � ����� "
-"������\n"
-"����� ������� ��������������� ������. �� � ���� ������ ��� �� �������� "
-"�����������\n"
-"����������� �������!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"���� �������, ���� �� ������\n"
-"��������� ����������, ����������� ��� �������� GNU/Linux.\n"
-"\n"
-"\n"
-"���� �� �� ��������� ��������� ����� ��, ��� �� �������, ���������\n"
-"\"������ ������ �� ����� (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX ��������� ���������� PCI SCSI �������(�). ���� DrakX\n"
-"������ ���������� SCSI ������� � � ���� ����� �������������� �������, �� �� "
-"����� ������������� \n"
-"����������.\n"
-"\n"
-"\n"
-"���� DrakX �� ������ �� ������ SCSI ��������, ISA SCSI �������� ��� PCI SCSI "
-"��������, \n"
-"����� ��� ����� ����� ������ � ������� SCSI �������� � ����� \n"
-"�������. ���� ��������� ���, �� ������ ������ \"���\". ���� �� �������\n"
-"\"��\", �� ��� ����� ��������� ������ ���������, �� ������� �� ������� "
-"������� ������ ���.\n"
-"\n"
-"\n"
-"\n"
-"���� �� ������� ������� ��� �������, DrakX ������� ���, ������ �� �� \n"
-"������� ��� ���� ���������. �� ������ ��������� DrakX ���������� ��������� "
-"����� \n"
-"����������. ������ ��� �������� ������.\n"
-"\n"
-"\n"
-"���� ���, ��� ������� ������� ��������� ��������. ����������, ����������� "
-"�����������\n"
-"������������ (����� 3, ������ \"Collective informations on your hardware\") "
-"for hints\n"
-"��� ������� ��� ���������� � �������� ������������ � ������������\n"
-"�� web ����� ������������� (���� � ��� ���� ������ � ��������) ��� "
-"���������� ��������� � Microsoft Windows\n"
-"(���� �� ���������� �� ����� �������)."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"�� ������ �������� �������������� ������ ��� yaboot, ���� ��� ������ "
-"������������ ������,\n"
-"���� ��� ������ ����, ���� ��� ���������� ������������ ������.\n"
-"\n"
-"\n"
-"��� ������ �� - ������ �������� ������ ����� � �������� ������.\n"
-"\n"
-"\n"
-"��� Linux, �������� ��������� ����������: \n"
-"\n"
-"\n"
-"  - �����: ��� ������ ���, ������� ����� ���������� � ����������� yaboot ��� "
-"������ ����� \n"
-"�������� ��������.\n"
-"\n"
-"\n"
-"  - �����: ��� ����� ��� ������������ ����.  ������ ��� vmlinux ��� \n"
-"������� vmlinux ���� ����������.\n"
-"\n"
-"\n"
-"  - Root: �������� ���������� ��� '/' ��� ��������� Linux.\n"
-"\n"
-"\n"
-"  \n"
-"  - ���������: � ������������ Apple, ���������� ���� ����� ������������ "
-"�����\n"
-"���������� ������ ����� ����������, ���� ��� �������� �� ���������� ������ "
-"���� ��� ���\n"
-"2�� � 3�� ������ ���������� �� ������� Apple �����. ��� ��������� \n"
-"��������:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: ���� �������� ����� �������������� ���� ��� �������� "
-"�������������� ������� �� ����, ��� ����������� \n"
-"���������� ������ ���������, ���� ��� �������� ������ ramdisk ��� �������� � "
-"��������� ��������.\n"
-"\n"
-"\n"
-"  - ������ Initrd: �� ��������� ������ ramdisk ������ 4096 ����. ���� ��� "
-"�����������\n"
-"���������� ������� ramdisk, �� ����� ������������ ���� ��������.\n"
-"\n"
-"\n"
-"  - ������-������: ������ '��������' ('root') ������ ������������� "
-"������������ � ������ ������-������, ����� ���������\n"
-"�������� �������� ������� ����� ��������� ������� � '�������' ���������. � "
-"���� ��������� �� ������ ��� ��������.\n"
-"\n"
-"\n"
-"  - NoVideo: ���� ������ ����� ���������� Apple ����� ��������� "
-"������������, �� �� ������\n"
-"������� ���� �������� ��� �������� � ������ 'novideo', � ���������� ������� "
-"framebuffer .\n"
-"\n"
-"\n"
-"  - �� ���������: �������� ���� ������� ��� ����� Linux, ������������� �� "
-"���������. ��� ����������� �������\n"
-"�������� ENTER �� ����������� yaboot. ���� ������� ����� ����� ������� "
-"�������� '*', ���� �� �������\n"
-"TAB ��� ���������� ��������� ��������."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot - ��������� ��������� ��� ������������ NewWorld MacIntosh. �� ����� \n"
-"��������� ���� GNU/Linux, ���� MacOS ��� MacOSX, ���� ��� ���� �� ����� "
-"����������.\n"
-"������ ������������ ������� ������������ � ��������������� ���������.\n"
-"���� ����� �� ���������, �� ������ ������� �������� ������\n"
-"� ���� ������. ������ ��������� ��� ������ ����������.\n"
-"\n"
-"\n"
-"�������� ��������� Yaboot:\n"
-"\n"
-"\n"
-"  - �������� ���������: ������� ��������� ���������, ������� ������������ "
-"����� ������������\n"
-"����������.\n"
-"\n"
-"\n"
-"  - ����������� ����������: ��������� �����, � ������� �� ������ ��������� "
-"����������, ����������� ��� \n"
-"�������� GNU/Linux. ������ � ����� �� ��� ������������ ������ bootstrap, "
-"��� \n"
-"�������� ���� ����������.\n"
-"\n"
-"\n"
-"  - �������� �������� Firmware: � ������� �� LILO, � yaboot ������� 2 "
-"��������  \n"
-".  ������ �������� ���������� � �������� � �� ���� ����� �� ������ "
-"�������� \n"
-"����� CD, OF ���������, MacOS ��� Linux.\n"
-"\n"
-"\n"
-"  - �������� �������� ����: ��� �������� ������ � ��������� �������� LILO.  "
-"����� \n"
-"������ Linux, � ��� ����� �������� � 0.1 �������, ������ ��� ����\n"
-"���� �� ��������� ����� �������.\n"
-"\n"
-"\n"
-"  - �������� �������� � CD?: ����� ����� ��������� �������� �������� 'C' ��� "
-"�������� � CD �\n"
-"������ ����������� ����������.\n"
-"\n"
-"\n"
-"  - �������� �������� OF?: ����� ����� ��������� �������� ��� �������� 'N' "
-"��� Open\n"
-"Firmware � ������ ����������� ����������.\n"
-"\n"
-"\n"
-"  - �� �� ���������: �� ������ �������, ����� �� ����� ����������� �� "
-"��������� ����� ��������� ������� �������� \n"
-"Firmware."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"�������� ������� ����, ������� �� ������ �������� ��� ���������\n"
-"������ ������� Mandrake Linux. ������ ���������, ��� ������ ����� �������� "
-"��� �����������\n"
-"��������������."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"������� �� \"OK\" ���� �� ������ ������� ��� ������ �\n"
-"�������, ������������ �� ���� ������� �����. ������ ���������, ����� ������� "
-"�� \"OK\", ��\n"
-"�� ������� ������������ ������� ���������� � �������, ������������ �� ���� "
-"������� �����,\n"
-"������� ��� ���������� Windows.\n"
-"\n"
-"\n"
-"������� �� \"������\" ��� ������ ���� �������� ��� ������ ������ � "
-"�������� \n"
-"�� ���� ������� �����."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"�� ������� ��������� ������(�): %s\n"
-"\n"
-"\n"
-"��� ������� ����� �������� �� ���������. � ��� �� ���������� ������� � "
-"�������������\n"
-", ��, ��������, ��������� ����� ������� ����� ����������. � ���� ������ ��� "
-"������� �������� �� ����������\n"
-".\n"
-"\n"
-"\n"
-"�� �������, ��� ������ ���������� ��� �������?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "���������� ������������ broadcast ��� NIS ������"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "�������� ����������������� ��� FAT ������� � �������� %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "��� ������� �� ��������������� ��� FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"����� ������������ ����������� ����� �������, ��������� ��������� � "
-"����������, �������� ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "������ ������ ����� %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"��������� ���������� �� ����� ���������� ��� ������ ��������� � ``������'' "
-"���������.\n"
-"�� ������ ����� ���������� � ��� ��: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"� ��� ������ ���� �������� ������.\n"
-"��� ����� �������� ������ (��� ������� ��� ������������).\n"
-"����� �������� ``����� ������������'' � ���������� �� � `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "� ��� ������ ���� ������ swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"� ��� ��� ������� swap\n"
-"\n"
-"���-���� ����������?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "� ��� ������ ���� ������ swap"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "������������ ��������� �����"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "������������ ���������� ����� ��� ���������� ����� ��������"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "������������ ������������ ������"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "��� ������������ �������� ��� �������������"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "������������ ������ Windows ��� loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "������� ������ �� ������ ������������ ��� Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "�������� �������"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "������ ��������� ������� � MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "������ ������� swap � MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "������������ ��������� ����� ������� Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "������ ������ ������� �� ������ ��������?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "���������� ������ �������� ������� Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"��������� ��������� ������� �������� FAT �� ����� ���������� ������, \n"
-"��������� ��������� ������: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"��� ������ Windows ������� ��������������, ��������� ������� ``defrag'' "
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"��������!\n"
-"\n"
-"������ DrakX ������ �������� ������ ������ ������� Windows. ������ "
-"���������: ��� �������� ������. ������� �� ��������� ��������� � \n"
-"��������� scandisk ��� Windows, ���� �� �� ������� ��� �� ��� ��� (� \n"
-"���������� defrag), � ����� ��������� � ���������. �������� ����� \n"
-"��������� ����� ������.\n"
-"���� ������, ������� Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "����� ������ �� ������ ��������� ��� windows"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "������ %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "��������� ������� FAT �����������: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"��� �������� FAT ��� ��������� ������� ��� ���������� loopback (��� �������� "
-"������������ �����)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "�������� ���� ����"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "������� Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"� ��� ��������� ������� ������. �� ����� �� ��� �� ������ ���������� Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "��� ������������ ������� � �� ������ ����� �������� �� ����� %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "����������� ��������� �����"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "����������� fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"������ ����� ������� ��������� %s.\n"
-"�� ���������� �� �������� ��������� ��� ������ `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "� ��� ������������ ����� �� ����� ������� Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "�� ������� ����� ��� ���������"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "������ ��������� ����� �� DrakX ����� ��������� �������:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "��������� �� ������� �� ������: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "����������� ����"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "������������� ����"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"��������� ������, �� � �� ����, ��� �� ��������� ����������.\n"
-"����������� �� ���� ����� � ����."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "������������ ����� ������������ %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"��������� ������ ������ �� ������������ ���������.\n"
-"���� ��� �������� CD, ���� CDROM �� � �������.\n"
-"��������� cdrom �� ������������� ���������� �������� \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "����� ���������� � %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "�������� ����������"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "������� �� ���� `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"�� ����� ������� ���� ��������. ����� ���������� ��������� ��� ���������\n"
-"Mandrake Linux. ���� ��� ��������, �������������� ��������� ����������. ��� "
-"�����\n"
-"������� `F1' ��� �������� � CDROM, � ����� �������� `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "����� ���������"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "����������, �������� ���� �� ��������� ������� ���������:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "����� ����� ��� ��������� ���� ����� ���������� �������� %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"���� �� ������ ���������� �����, ������� ��� ����, ������� ������� \n"
-"�������, ������� �� ������ ����������.\n"
-"\n"
-"��� ������ ��������� ����������� ������ �������� ������ ������;\n"
-"�������� 100%% �������� � ��������� ���� ��������� �������."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"� ��� ���� ����� �� ����� ������ ��� %d%% �� ���� �������.\n"
-"\n"
-"���� �� ������ ���������� ������, ��� ���, ������� � ��������� ����,\n"
-"�������, ������� �� ������ ����������.\n"
-"��� ������ ��������� ����������� ������ �������� ������ ������;\n"
-"�������� %d%% �������� � ��������� ����������� ���������� ����� �������."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "����� ������ �� ����� ����� ����� ������� �� ��������� ����."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "������� ������� ��� ���������"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "����� ������ �������"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "����� ��������� �������"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "����� �����: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "������ �����"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "���: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "������: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "������: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "��������: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"������ �������� ���� �����, ��������� ��� ��� ��������� ������������ �����"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "����� ����������� ��������� ������"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "����� ������� ��������� ������"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "�� �� ������ �������/�������� ����� ����� ������"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "��� ������������ �����, �� ���� ������ ����������"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "������ �������� ����� ����� ������, �� ��� ����������."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"���� ����� ������� ��������\n"
-"�� �������, ��� ������ �������� ��� �����?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "������ �������� ����� ����� ������. �� ������ ���� ��������"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "�������� ���������������������� ������"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "���������"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "��������� �� �������"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "��������� ����� �������"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "����� �� �������� ���������"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "����� ������� ��� ���������"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "���� ���������"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "�����"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "���������� ����� "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "����������, ���������, ���������������� ���������"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d �������"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "��������� ������ %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "�������"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "����������"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"������� Cd-Rom!\n"
-"\n"
-"�������� Cd-Rom ��� ��������� \"%s\" � ������ � ������� Ok.\n"
-"���� � ��� ��� ���, ������� �������� (Cancel), ����� �������� ��������� � "
-"����� �����."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "��� ����� ����������?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "��������� ������ ��������� �������:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "��� ��������� ������� ��������� ������:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"��������\n"
-"����������, ����������� ���������� �������, ����������� ����. ���� �� �� "
-"�������� � ����� ������\n"
-", ��� �� ����������� ������������� ��������� CD. ������� '����������' \n"
-"��� ����������� ��������� ��� ����� ��������.\n"
-"\n"
-"\n"
-"��������� ����������, ������������� �� ��������� CD �� ���������������\n"
-"��������� GPL ��� ��������� ������������. ������ ����� ���������\n"
-"��������������� ��������������� ��������� ��� ��������. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "��������� ������"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "�� ������ ������������� ����"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "������������ ����������"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"��������\n"
-"\n"
-"������������ ������� � ��������� ����������, ��������� � ������������ "
-"Mandrake Linux \n"
-"����� ����� ���������� \"����������� ��������\". ����������� �������� "
-"���������, �� �� �������������� \n"
-"����� ��������, �������, ������ � ������������, ����������� � ������������ \n"
-"������� � ��������� ����������� ������������ Mandrake Linux.\n"
-"\n"
-"\n"
-"1. ����������� ����������\n"
-"\n"
-"����������, ���������� ���� �������� �����������. ���� �������� �������� "
-"������������ ����������� ����� ���� �   \n"
-"MandrakeSoft S.A., ������� ����������� � ����������� ���������.\n"
-"������������, ������� ��� ��������� ����� ������� ����������� ��������, �� "
-"���� \n"
-"���������� � ��������� ������������ ��������� �������� � ��������  ���� "
-"��������. \n"
-"���� �� �� �������� � ����� ������ ������ ��������, ��� �� ����������� "
-"�������������, ���������� ��� ������������ \n"
-"����������� ��������. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "����������"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "����������, �������� ��������� ����� ����������"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "������ ������ ��������� ���������"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "����� ����� ��������� �� ������?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "���������/����������"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "��� ����� ��������� ��� ����������?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "�������������"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "�������"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "����������"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "��������� ����� �������"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "����������, ������� ��� ����� ����"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "���� ����"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "�������, � ������ ����������������� ����� ���������� ���� ����."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "�������� ������ ����"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "������� 2 ������"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "�������� 3 ������"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "��������� ���� PCMCIA ..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "��������� IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "��� ��������� ��������"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "�������� �������� - ����� ����� ������������"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "�������� ����� ������������"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"�� ���� ��������� ������� ��������, ��� ������� ���������� ��� ���� :(\n"
-"����� ����������� �������� ������ ������� (��� ���������� ����� ��������!).\n"
-"������ ������� - �� ��������� DrakX �������� ������� ��������.\n"
-"(������ %s)\n"
-"\n"
-"�� �������� �������� ��� ���� �������?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake �� ���� ��������� ��������� ������� ��������.\n"
-"����������� �� ���� ����� � ����!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "����� �������� ��� ��������������"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "�������� ������"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "����� ������ �������� �������� (/) � ����� �������?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "����� ����������� ������� �������� �������������, ���������������"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "����� �������� ��� ��������������"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "��������� ������ �����?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "�������������� ��������"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "�������� � �������������� ����� %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"������������� ������ ����������� ������ (swap) ��� ���������, ������� "
-"���������"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "�������� ��������� �������"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "����� ������� ��� ����������"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"�� ����� ������� �������� ������������ ����� ��� ��������� ��� ���������� (%"
-"d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "��������� (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "������� (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "������������� (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "������������ � �������"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "������������ � �������"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "����� ������ �������"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "�������� ������� � �������� %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "��������� �� �������"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "��������� ������ ������, ��� �������� �����"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"���� � ��� ���� ��� CD �� ������������ ���� ������, ������� Ok.\n"
-"���� � ��� ��� �� ������ �� ���, ������� ��������.\n"
-"���� ����������� ������ ��������� CD, �������� �� ����� � ������� Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ��� ������ \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "���������� ���������"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"��������� ������ %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "��������� ����� ���������"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "�������� ������� � �������� %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "�������� ������ ������� � �������� %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"������ � ��� ���� ����������� ��������� ��������� ��� ����������.\n"
-"\n"
-"��������:\n"
-"\n"
-"���������� ����� �����������, ������������� �� ��������� ����� ���� � "
-"���������\n"
-"� ������ �����������������, �������� �/��� ������������ ���� �������� "
-"������\n"
-"������ ���������, ��� ������ ���/�� ����� ��������� ���������, �������\n"
-"�/��� ������������ ��� ���������.\n"
-"\n"
-"����� ����, �������� �/��� ������������ ������ ���� �������, ��� ��  "
-"��������\n"
-"������� ����� ������. ���� �������� �/��� ������������ ����������\n"
-"��� ���������� � ���� ������, ��/��� ������� �������\n"
-"���������������.\n"
-"\n"
-"�� � ���� ������ �� Mandrakesoft, �� �� ����������� � ���������� �� "
-"��������\n"
-"�� ����������������, �������� ��� ��������� ���� (�������, �� �� \n"
-"������������� ��������� ��������, ����������� �������, ������� ������������ "
-"������ �\n"
-"������� ��������, � ����� ���������� ��������� � �������� ����������� "
-"������\n"
-"�� ������� ����) ���������� �� �������������, ��������, ��� ������\n"
-"���������� ���� ��������, � ������� �������� ��� ������������ ��������\n"
-"������ ����� ���������� ���������� ����������.\n"
-"\n"
-"� ������ ���������, ����������� ����������, �����������: \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "����� � �������� ��� ��������� ������ ��������� �������"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "����� ������� ��� ��������� �������"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "����� � �������� ��� ��������� ������ ��������� �������"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "����� ��� ������� ����?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "���� ��������� ���� ����������� �� GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS ������"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "��������� CUPS ������"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "��� ��������"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "���� �� � ��� ������?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "������"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "����"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "������� ����"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "�������"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "���������� ����� ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "�������� �����"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV �����"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "������������ NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "��������� �������"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "������� ������ ��� root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "��� ������"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "���� ������ ������� ����� (��� ����� ������ ���� �� ����� %d ��������)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "��������������"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "��������������"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "NIS ������"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "�������������� NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS �����"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS ������"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"� ������� ����������� ����������� ������� �� ������� ��������� Linux ��� "
-"����������� �� �������� ���������� ����������. ��� ����� ���� �������, ���� "
-"�� �� ������ ������������� SILO, ��� ���� ������ ������������ ������� ������ "
-"SILO, ��� SILO �� ������ �������� � ����� ������������. ����������� "
-"����������� ������� ����� ����� ���� ������������ � ��������� ������� "
-"Mandrake, ��� ������� �������� �������������� ������� ����� ������� �����.\n"
-"\n"
-"���� ������ ������� ����������� ���� ��� ����� �������, �������� ������� � "
-"������ \n"
-"�������� � ������� \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "������ ��������"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "������ ��������"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "����������"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"����������� ����������� ������� ������������ ����������� �������� Linux ��� "
-"����������� �� �������� ���������� ����������. ��� ����� ���� �������, ���� "
-"�� �� ������ ������������� LILO (��� grub) �� ����� �������, ��� ���� ������ "
-"������������ ������� ������ LILO, ��� LILO �� ������ �������� � ����� "
-"������������. ����������� ����������� ������� ����� ����� ���� ������������ "
-"� ��������� ������� Mandrake, ��� ������� �������� �������������� ������� "
-"����� ������� �����.\n"
-"������ ������� ����������� ���� ������?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "��������, �� �������� ����������"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "�������� ��������, � ������� ����� ����������� ����������� �������"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "�������� ������� � �������� %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "�������� ����������� �������"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "���������� ���������� ����������"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "�� ������ ������������ aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"������ ��������� aboot, \n"
-"����������� ������� ��������� ��������, ���� ���� ��� �������� ������ ������?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "��������� ��������� ��������"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "��������� bootloader �� ������. ��������� ��������� ������:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"��������, ��� ����� ������� ��� Open Firmware ����������� ����������,\n"
-" ����� ��������� ��������� ���������. ���� �� �� ������ ����������� "
-"���������� ����������\n"
-" ��� ������������t, ������� � ����������� Command-Option-O-F ��� "
-"������������ � �������:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" ����� �������: shut-down\n"
-"��� ��������� �������� �� ������� ����������� ���������� ����������."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "�������� ������ ������� � �������� %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "�������� ����-����������������� �������"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"��������� ���� �� ���������.\n"
-"\n"
-"�� ������������� ������ ����� ������?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"�����������, ��������� ���������.\n"
-"������ ����������� ���� � ������� enter ��� ������������.\n"
-"\n"
-"\n"
-"�� ����������� �� ������������ ������� ������� Mandrake Linux,\n"
-"����������� �� \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"���������� � ��������� ����� ������� ���� � �����-������������\n"
-"����� ������ ����������� ������������ �� ������������ Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "�������� ����-����������������� �������"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"��� ������� ������������� ����� ���� ��������� ����������������,\n"
-"� ���� ������ ��� ���������� ����� �� ����!!\n"
-"(��� ������� ����� ��� ��������� �� ������ ���������).\n"
-"\n"
-"��������, �� ����������� ��������� ���������.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "��������������"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "���������"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "��������� ����� �������"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "��������� Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> ����� ����������  |  <Space> �����  |  <F12> ��������� "
-"����� "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "���������� kdesy"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "�������� ��������"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "�����������"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "���������, ����������"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "����������"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "���������� ������"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "�������� ������"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "������������ ����� ������� ������� � ����������� �� �������"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "������ �����, ���������� ���\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "��� �����? (��������� %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "��� �����? (��������� %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "���������: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "�� ������ ������������ aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "��� �����? (��������� %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "������� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "�����������"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK ����������"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US ����������"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "��������� (������)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "��������� (����������)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "��������� (������������)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "��������������� (��������)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "�����������"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "��������� (������������)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "����������� (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "�e���������"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "����������� (�������� ���������)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "����������� (����������� ���������)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "������� (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "�������� (��� ������� ������)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (���)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (����������)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (���)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "���������� (\"�������\" ���������)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "���������� (\"���������\" ���������)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "�����"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "����� (������������)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "�����������"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "�������� 106 ������"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "��������� ����������"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "������-������������"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "��������� AZERTY (������)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "��������� AZERTY (�����)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "��������� \"����� ����\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "��������� \"������������\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "���������������"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "�����������"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "�����������"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "�������� (��������� qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "�������� (��������� qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "�������������"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "��������� (������)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "������� (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "������� (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "������� (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "��������� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "��������� (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "��������������� (���������)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "������� ����������"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "������� ����������"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "�������� (������������ \"F\" ������)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "�������� (����������� \"Q\" ������)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US ���������� (�����������������)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "����������� \"�������� ���\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "����������� (��������/���������)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "����������� ������������ %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "������� ������� ���������� ����\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "���� Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "������� PS2 ���� � ���������"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 ������"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "������� 2-� ��������� ����"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "�������"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "��������"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "����������������"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "������� 3-� ��������� ����"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (����������������, ������ ��� C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "bus-����"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 ������"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 ������"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "�������"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "��� ����"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "��������� ���� ����"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "����� ��������� ����,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "��������� ��������!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "�������"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "��������� ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- ����������"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "��� �����?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "�������������� � ��������"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"�������� ���������������� ������� ����������� ����� adsl - ��������� pppoe.\n"
-"��������� ���������� ���������� pptp, ������ dhcp.\n"
-"���� �� �� ������, ��������� '������������ pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "������������ dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "������������ pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "use pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"������ ���������� ��������� dhcp �� ������ ������������?\n"
-"�� ��������� - dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"�� ����� ������� �� ���������� �������� �������� ethernet.\n"
-"�� ���� ���������� ���� ��� ����������."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "����� �������� ����������"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"�������� ������� �������, ������� �� ������ ������������ ��� ���������� � "
-"��������?"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "������� ���� �� �������"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "��������� ����"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"������� ��� ����� ������ (host), ���� ������ ���.\n"
-"��������� �������� DHCP ��� ������ ���������� ��� ������.\n"
-"��� ����� ������ ������ ���� ������ ���������,\n"
-"�������� ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "��� ������"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "������ ��������� ����"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "������� ����� ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "���������� ����� ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "����� � ��� ��� ISDN ����������?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "���������� ��������� ������� ������ ���� (firewall)!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "���������� ��������� ������� ������ ���� (firewall)!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "��������� ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"�������� ����������.\n"
-" ���� ��� ��� � ������, �������� �����������"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "������� ��������"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "������ (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "��������� ���"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"��������� ��� \n"
-" ��� D-������ (���������� �����)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "����� �������� ����� �������������� ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "����� � ��� ��� �����?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "� �� ����"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"���� � ��� ����� ISA, �� �������� �� ��������� ������ ������ ���� �������.\n"
-"\n"
-"���� � ��� ����� PCMCIA, �� ��� ���� ����� irq � io ����� �����.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "��������"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "����������"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "����� � ��� ����� ISDN ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"���������� ����� ISDN PCI, �� �� ��� �� ������� ����������. �������� �� "
-"��������� ������ ����� PCI."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "����� ISDN PCI �� ����������. �������� �� �� ��������� ������."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "��������, � ������ ����������������� ����� ��������� �����."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "��������� �������"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "��� ����������"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "����� ��������"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "��� (Login ID)"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "�� ���� �������"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "�� ���� ���������"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "��� ������"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "������ ������ DNS (�������������)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "������ ������ DNS (�������������)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"�� ������ ������������� ��� ������������� ���� ����������."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"�� ������ ������������� ���� ����������."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "� ������ ������ �� ��������� � ��������."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"�� ������ ����������� � �������� ��� ������������� ���� ����������."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "� ������ ������ �� �� ��������� � ��������."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "�������������"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "�������������"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "��������� ����"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "���������� �������� � ���������"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"�� ������ ������������� ��� ������������� ���� ����������."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"�� ������ ������������� ��� ������������� ���� ����������."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "������������ ����"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"��������� �� ������� ��������� ����, ���� ���� ��� ���������.\n"
-"������� Ok ����� �������� ������� ���������, ��� ��������, ����� "
-"������������� ���� ��������� � �������� � ��������� �����.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"����� ���������� � ������ ��������� ����\n"
-"\n"
-"������ �� �������� ���� ���������� � �������� �/��� ��������� �����.\n"
-"���� �� �� ������ ������������ ���������������, �������� �������.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "�������� ������� ��� ���������"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "������������ ���������������"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "����������� ���������..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "������� �������� ����������"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "������ �� ����� %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN ����������"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "������� %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "���������� �� ��������� ����"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "��������� �� ���������� %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "��������� ����������"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "��������� ����������"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "���������� �� ��������� ����"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "���������� ���� ��� ��������� ������� ���� ethernet"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "�������� ���������, ������� �� ������ ������������"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "���������� ��������-����������"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "������ �� ��, ����� ���� ���������� ����������� ��� ��������?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "��������� ����"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"�������� �������� ��� ����������� ����: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"�����������, ��������� ���� � ���������� � �������� ���������.\n"
-"\n"
-"������ ����� ������� ��������� � ����� �������.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"����� ����� �� ����������� ������������� ��� X ������, \n"
-"����� �������� ������� ��-�� ����� ����� ����������."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"��������: ��� ���������� ����� ���� ���������������� ��� ����������� � "
-"��������.\n"
-"������ �������� ��� ���������� �����������.\n"
-"��������� ����� ����� ������� ���������� ���������."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"���������� ������� IP ������������ ��� ����� ������.\n"
-"������ ����� ������ ���� �������� ��� IP ����� � ���������-�������� \n"
-"������� (��������, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "��������� �������� ���������� %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr "(driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP �����"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "����� ����"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "�������������� IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ����� ������ ���� � ������� 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"������� ��� ����� ������ (host).\n"
-"��� ����� ������ ������ ���� ������ ���������,\n"
-"�������� ``mybox.mylab.myco.com''.\n"
-"�� ������ ����� ������ IP ����� �����, ���� �� � ��� ����"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS ������"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "�������� ����������"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "��������� proxy"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy ������ ���� http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy ������ ���� ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "��������� ��������"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "������ ����� � �������� ������?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "�������� ������ ����������..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "������ ������� ��������� � ��������."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "�� ����������� ������������, ���������� ����� ������ ���������"
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"������, ������� �� ����� � ��������.\n"
-"���������� ��������� ����������."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "��������� ����������"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "��������� ��� ��������� ���� �����"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ �����"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "����� (DMA) �����"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO �����"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 �����"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 �����"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "��� ������ ���������� �����"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "��� ���������� (����. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "����� �������� ����������"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "IP ����� ������� DNS ������� ���������� (�������������)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "IP ����� ������� DNS ������� ���������� (�������������)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "����� ����������"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "����� �������"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "��� ����������: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "��� ����������: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "���� (��� ������������)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "������"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "������ ������������: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "����������� ������� �� �������������� �� ���� ���������"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"� ��� ���� ���� � ������� ��������, �� � �� ���� �� ������������.\n"
-"������������ ����� ������� � ���, ����� ����������� ��������� ������� ���, "
-"����� ���� ��� ����� �� ����������� (extended) ��������"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "�������������� �� ����� %s ����������� %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "������ ���� � ��������� ������"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "������ ������ � ���� %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"���-�� ������ ���������� �� ����� �����. \n"
-"���� �� ����������� ������ �� ������. \n"
-"��� ��������, ��� ������ ���������� �� ���� ���� ���������� ����� ������"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "�����������"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "�����"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "������ ����������"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "����������"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "����� � ���"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "��������� �������"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "��������� �������"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "��������� CUPS ������"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "��������� lpd ������"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "������� ������� (�����)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "������ ������"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "����� ���������� ������"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "��������� �������"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "��������� �������"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "������ ������ � ���� %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(������ %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP ������� CUPS"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (���������)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "����� ���� ����������� ��������"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "��� ����������� ��� �������?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"� ��������� �������� ������ CUPS, ��� �� ����� ����� �����������\n"
-"������� ���������; �������� ����� ���������� �������������.\n"
-"���� ������������, �������� \"��������� CUPS ������\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "��������� ��������� ����"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "��������� CUPS ������"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ����� ������ ���� � ������� 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "����� ����� ������ �������� �� ����"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP ������� CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "����"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "��������� ���� ��������"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "����������� ���������..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "��������� �����"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "��� ��������"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "��������� �������"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "��������� �������"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "������������ ���������������"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "��������� �������"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "������� %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "����� ���������� ������"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "��������� �������"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "��������, � ������ ����������������� ����� ��������� �����."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "����� ���������� ������"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "���������"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "��������� ������ %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "��������� ������ %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "������ ���� ��������� CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "������ ���� ��������� CUPS..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "����� ���������� �������� lpd"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"��� ������������� ��������� ������� ������ ��� ����� ������� ��� ���������� "
-"������� ������ � ��� ������� ������ �� ���� �������, � ������� ��������� "
-"������ ����� �������� ������� �� ������."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "��������� ������"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "��������� �������"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "��������� ������"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "��������� ������"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "����� �������� SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"��� ������ �� �������� SMB ��� ���������� ������� ��� ����� SMB (�� ������ "
-"��������� � ������ � ���� TCP/IP) � ����� IP ������� ������, � ����� ��� "
-"�������, ��������� � ��������� ���������, ��� ������������, ������ � "
-"���������� � ������� ������."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "������ SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP ������� SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "��� �������"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "������� ������"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "����� �������� NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"��� ������ �� ������� NetWare ��� ���������� ������� ��� ������� ������ "
-"NetWare (�� ������ ��������� � ������ � ���� TCP/IP) � ��� �������, "
-"��������������� ���������� ��������, � ����� ��� ������������ � ������."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "������ ������"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "��� ������� ������"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "����� �������� Socket"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "��� ������ � ���������"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "��� ������ � ���������"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "����� ���������� ������"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "��� ��������"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "��������"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "���������������"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "������ ���� ��������� CUPS..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "��������� �������"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "��� �����?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "��������� �������"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "����������� ��������"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "����� � ��� ��� ��������?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "��������� ��������"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "��������� ��������"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "������ ��������� ������� ������?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "��������� �����"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "��, ���������� ��� ������� �������� ������"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "�������"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "�����������"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "������ �������� �������..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "������ �������� �������..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "������ �������� �������..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "������ �������� �������..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"������� �������� ���������� ������ ������.\n"
-"������ ��� ������� ���������� ����� ������ ��������� �����.\n"
-"������ ������:\n"
-"%s\n"
-"\n"
-"�� �������� ���������?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"������� �������� ���������� ������ ������.\n"
-"������ ��� ������� ���������� ����� ������ ��������� �����.\n"
-"�� �������� ���������?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "��� ��������"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "�������"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "������������� ����"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "������������� ����"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "��������� ��������"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "������ ���� ��������� CUPS..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "��������� ��������"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "��� �������� ������ ��������� ������ �����, ����� � �������������"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "��� ��������"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "������ ���� ��������� CUPS..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "������ ������ ����������..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "��������� ����"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "������� �� ��������"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "��������� ����"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "����� ������� ������ �� ������ ������������?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "�������"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "��������������"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "����� ������� ������ �� ������ ������������?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "����� ���� ����������� ��������"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "����� ������� ������ �� ������ ������������?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "��������� �������"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "��������� ������ %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "��������� ��������"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "������ ���� ��������� CUPS..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "��������� �������"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "������ ��������� �������?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "�������"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"������� ��������� ������� ������.\n"
-"�� ������ �������� ����� ��� �������� ������������."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"������� ��������� ������� ������.\n"
-"�� ������ �������� ����� ��� �������� ������������."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "��������� ����"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "���������� �����"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "������ �������������� ���������?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "��������� ��������"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "������ �������������� ���������?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "���������� ��������-����������"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "����������� ��������"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "������ �������� �������..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "������ �������������� ���������?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "��������� �������"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "������ ���� ��������� CUPS..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "��������� �������"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "�� ������ ������������� ����"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "������ ���� ��������� CUPS..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "��������� proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "����"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Proxy ������ ���� http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "����� ����� ������ �������� �� ����"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Proxy ������ ���� ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "����-����"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "������"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "��� ������"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "������ �� ���������"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "�� ���� �������� ������ �� _�����������������_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "�� ���� ������ � ���� %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid �� ��������"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid �� �������� (��������, ��� raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "������������ �������� ��� RAID ������ %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-"��������� ALSA (����������� �������� ����������� Linux) �������� �������"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, ����������� ��� ������������� �� ������� ������."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ������������ ��� ������������ ��������� ������� � ������� ��������� "
-"����� syslog.\n"
-"����� ����� ���� ����������� ��� ���������� ������ ��� ������� ������� "
-"�������."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"��������� �������, ��������� � ���������� �������� at �� �����, ��������� "
-"���\n"
-"������� at, � ��������� ������ ������, ����� ������� �������� ���������� "
-"�����."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron �������� ����������� ���������� UNIX, ������� ��������� ��������� "
-"�������������\n"
-"��������� �� ����������. vixie cron ��������� ����� �������� � ��������� "
-"cron �� \n"
-"UNIX, ������� ������ ������������ � ����� ������ ��������� ���������."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ��������� ��������� ���� ��� ����������, ���������� � ��������� ������, "
-"����� ,��� \n"
-"Midnight Commander. �������������� ����� �������� ����� ��������-�-�������� "
-"� ����������� ���� � \n"
-"�������."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ��������� �������� ������ � ��� ������������� ����������� \n"
-"�����/������������ ����������."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache �������� �������� World Wide Web. �� ������������ ��� ������������ "
-"������ HTML � CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"����� ������������ �������� (���������� ������ inetd) ��������� �� ���� \n"
-"������������� ��������� ��������-�������. �� �������� �� ������ ������ \n"
-"��������, ������� telnet, ftp, rsh, � rlogin. ���������� inetd �������� \n"
-"����� ��� �������, �� ������� �� ��������."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"��������� ���������� ������� ��� Linux � ������ ����� 2.2, ����� ���������\n"
-"������� ������ ���� (firewall) ��� ������ ����� ������ �� ������� ����."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"���� ����� ��������� ��������� ��������� ���������� � ������������ � \n"
-"/etc/sysconfig/keyboard.  ����� �������������� ��� ������ ������� "
-"kbdconfig.\n"
-"��� ����������� ����� ����� �������� ����������."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"�������������� ������������ ��������� ���� � /boot ���\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "�������������� ����������� � ��������� ��������� ��� ��������."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf ������ �������������� ���������� ��������� �����\n"
-"�� ����� ��������, ��� ����������� ������������ �������."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd �������� ������� ������, ����������� ��� ���������� ������ lpr. ���\n"
-"� ������ ������� ������, �������������� ������� �� ������ �� ���������."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux ����������� ������, ������������ ��� �������� ���������������������� "
-"��������\n"
-"� ������� ��������."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) �������� �������� �������� ���� (DNS), ������� ������������ ��� "
-"�������������� ���� ����� � IP ������."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"��������� � ������������ ��� ������� �������� ������� (NFS), SMB (Lan\n"
-"Manager/Windows) � NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"������������/�������������� ��� ������� ����������, ����������� �� ������\n"
-"��� ��������."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS - ��� ���������������� �������� ��� �������������� ������� � ������ � "
-"����� TCP/IP.\n"
-"���� ������ ������������ ���������������� ������� NFS, �������������� �\n"
-"����� ���� /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS - ���������������� �������� ��� �������������� ������� � ������ � ����� "
-"TCP/IP.\n"
-"���� ������ ������������� �������� ������������ ������ NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"������������� �������� ������� numlock � ������� � \n"
-"XFree ��� ��������."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "��������� OKI 4w � ����������� win-���������."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"��������� PCMCIA ������ ����� ��� ��������� ������ ���� ethernet � ������� "
-"�� ����������� �����������. ��� �� �������� �� ��� ���, ���� �� ����� "
-"���������, ����� ������� \n"
-"�� ��������� �� �������, ��� ��� �� �����, ���������."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper ��������� ������������ RPC, ������� ������������ ������ "
-"�����������\n"
-"��� NFS � NIS. ������ portmap ������ �������� �� �������, \n"
-"������� ������������� ��� ������� ��� ����������, ������� ��������� "
-"������������ �������� RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix �������� ������� �������� �����, �� ���� ����������, ������� \n"
-"���������� ����� � ����� ������ �� ������."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"��������� � ��������������� ��� ��������� �������� ��� ��������� ��������\n"
-"��������� ��������� �����."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"��������� raw-���������� block-����������� (����� ��� �������\n"
-"�������� �����), ��� ������������� ������ ������������, ��� Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"����� routed ��������� �������������� ���������� ������ IP ������������� "
-"����� \n"
-"�������� RIP. � �� ����� ��� RIP ������ ������������ � ��������� �����, ���\n"
-"����� ������� ����� ����� ����� ������� ��������� �������������."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"�������� rstat ��������� ������������� ���� ��������\n"
-"������ � ������������������ ����� ������ ������� ����."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"�������� rusers ��������� ������������� ���� ����������, ��� ��������\n"
-"�� ������ ���������� ������."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"�������� rwho ��������� ���������� ������������ �������� ������ ���� "
-"�������������,\n"
-"���������� �� ������ � ������������� ������� rwho (���������� finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "��������� ��������� ����� �� ����� ������"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog - ��� �����������, ������� ���������� ������ ������ ��� ���������\n"
-"��������� � ��������� ������� ��������� ���������. ������, ����� syslog "
-"������ �������."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "��������� �������� ��� ����� USB ���������."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "��������� X Font Server (���������� ��� ������ XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "��������, ����� ������� ������ ������������� ����������� ��� ��������"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "�������"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "��������"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "��������� �����"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "����� ���������� �������� lpd"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "���� ������"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "����������"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "����������"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "�����������"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "������� � ������"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"��� �������������� ����������\n"
-"�� ��� �������. ��������."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "��� ��������"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "������:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "������"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "��������� ���"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "������ � ��������"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "����������� - �������"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "����������"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "����� ����������"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "������� ���������"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "������ SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "����"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "�������"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "��������� ������ %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"������� �������� �� ��������, ��� ������� ��������� :(\n"
-"���������� ����������, ������ ������ �������"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "������"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "��������� ����� ���������"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "��������� ���� ��������"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "�����������!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "���������"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "�������� ������������"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "�������������� ����� loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "������ ���� � ��������� ������"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "������ ���� � ��������� ������"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "������ ���� � ��������� ������"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "����� ������ �������"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "����������, �������� ������, ������� �� ������ ����������"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "������� �������"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "������� Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "���������������� ���"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "��������� ���� ����"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "���������� ��� ���"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "���������� ��� ���"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "��� ������"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "���������� �� ��������� ����"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "����� ���� ����������� ��������"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "����������, �������� ��������� ����� ����������"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "���������� ������� �� ������"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "����������, �������� ������, ������� �� ������ ����������"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "������ ���� � ��������� ������"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "��������� ���� ����"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "������ ���� � ��������� ������"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "������� ���������"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "���������������� ���"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "����������, �������� ������, ������� �� ������ ����������"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "�������, ����� ���� ������������."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "����������� �������� �����"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "���������������� ���"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "��������"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "��������"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "��������� ������:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "������������ ����"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "����������, �������� ������, ������� �� ������ ����������"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "����������, �������� ������, ������� �� ������ ����������"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "�����. �������� ������"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "���������"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "��������, � ������ ����������������� ����� ��������� �����."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "������������ ����"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "������ ���� � ��������� ������"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "����������, ������� ��� ����� ����"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "������ ���� � ��������� ������"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "������������ � �������"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "����������, ������� ��� ����� ����"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "������"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "��������� �������"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "������������ �� �����"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "������������ �� �����"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "�����������"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_������"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- ����������"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "������:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "������ ���� � ��������� ������"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "������������ �� �����"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "��������� ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "����� ������� ��� ���������"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "�������, ����� ���� ������������."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "�������, ����� ���� ������������."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "�������, ����� ���� ������������."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "������ ���� � ��������� ������"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "������ ���� � ��������� ������"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "������ ���� � ��������� ������"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "��������� � ����"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "��������� ���� ����"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "����������, �������� ������, ������� �� ������ ����������"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "������������ ����"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "������������ ����"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "��������� ��������� ����"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "��������� ��������� ����"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "�����. �������� ������"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "��������� %s ����������� ��������. ��������� ��������� ������:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "������� ���� �� �������"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "������"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "���������� ���������"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "����������"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "����������"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "�������������� ��������"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "��������� ��������� ����"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "����� ������������"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "����� �������� ��� ��������������"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "����"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "��������"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "�������"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "��������� �������"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "�������� ����"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "��������� �������"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "��������� ���������"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "�� ����� ������ ��� �������� ��������!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "���������"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "�� ����� ������ ��� �������� ��������!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "����� �� �������� ���������"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "���������� ��������-����������"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "���������� ��������-���������� � ������ ������ ��������"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"��������� ���������� ���������� � �������� ��� �������.\n"
-"� ������ ������ ���������� ��������.\n"
-"\n"
-"��� �� ������ �������?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "���������"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "������"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "�������������"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "���������� ��������..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "���������� ���������� � �������� ������ ���������."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "���������� ��������-���������� � ������ ������ ���������"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"��������� ���������� ���������� � �������� ��� �������.\n"
-"� ������ ������ ���������� ���������.\n"
-"\n"
-"��� �� ������ �������?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "��������"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "��������� ��������..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "���������� ���������� � �������� ������ ��������."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "��������� %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "�� ����� ������ ��� �������� ��������!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "������� ���������"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"� ������� ���� ������ ���� ����������� ������� �������:\n"
-"\n"
-"%s\n"
-"\n"
-"� ��������� ��������� ��������� ����, ��������� ���� �������."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"����������, ��������, ����� ������� ������� ����� ��������� � ����� "
-"��������� ����."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "������� �� ��������"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "��������� ���� ��������"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "��������� ��������"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP ������� CUPS"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"������������� �������� ������� LAN ��������� � ������� ������������ %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "���������� ��������� ������� ������ ���� (firewall)!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"��������! ���������� ������������ ��������� ������� ������ ����� (firewall). "
-"��� ����� ������������� ��������� ������ ����������� ����� ���������."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "���������..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "��������� ��������, ��������� ��������, ������ ��������..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "�������� � ���������� ������ %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"��� ���������.\n"
-"������ �� ������ ��������� ���� �������� ���������� � ������� ������������ � "
-"����� ��������� ����, ��������� �������������� ��������� ���� (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "��������� ��� ���� �������, �� ������ ��� ���������."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "��������� ��� ���� ������� � ������ ��� ��������."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "��������� ���������� ���������� � �������� ������� �� �����������."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "��������� ���������� ���������� � ��������"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"����� ���������� � ������� ���������� ���������� � ��������!\n"
-"\n"
-"%s\n"
-"\n"
-"������� �� ��������� ��� ������� ������� ���������."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "������������ ����  (%d ���������)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "�������: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "������� �������..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "��������� �������:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "����� �������..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "��� ����������:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "������ � ��������"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "���:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "����:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "���������:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "������:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "��������� ������� � ��������..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "��������� ��������� ����"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "�������"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "���������"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "��������"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "������:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "��������� ��������� ����..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "������..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "���������"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "����������, ���������... �������� ��������� � ���������"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "���������"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "�� ���������"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "���������..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "�����������..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"� ��� ��� ����������� �����������.\n"
-"������� ����� �� ��������� ����� �� '���������'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "��������� ��������� ����"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "������� %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "������� ��������"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "�������� ��� ��������"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "������ DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "��������"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "��������"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"� ��� ��� �� ������ ���������� � ��������.\n"
-"������� �������� ����������, ����� '���������'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "��������� ���������� � ��������"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "��������� ���������� � ��������"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "��� ����������: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "���������"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "����"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "������� �����"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "������ DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "��������� ������� ������������"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "����� ����������"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "�������� ���������, ������� �� ������ ������������"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "��������� (������)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "������"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "����������"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "������"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "����������������"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "�������������: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "����������, �������� ��������� ����� ����������"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "�� ������, ����� ������� BackSpace �������� � ������� Delete?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "������� Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"�������� Cd-Rom ��� ��������� Installation � �������� � ������� Ok.\n"
-"���� � ��� ��� ���, ������� �������� (Cancel), ����� �������� ���������� � "
-"����� �����."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "���������� ������ ���������� !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "���������� ������ �� �������"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/����/_�����"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/����/_�������"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/����/_���������"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/����/��������� _���"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/����/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_���������"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/���������/��������"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/������"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/������/_� ���������..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "���������������� ���"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "���������"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "������ ������� � �������"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "�����"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "������� ����������� ������� �������"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "���������"
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "�������������"
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "����� ���������������"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "�������� ����"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "���������"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "���������� �����"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "���������� ���������, �����������: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "��������� ��������� ����"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "����������"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "��������������"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "���������"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "��������� ���..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "����������, ������� ��� ����� ����"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_usb �� ������\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "����������� ������ ������?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "�������� ����������"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "����������� ����������"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "��������� ������� ������ ����� (firewall)"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "��������� ������� ������ ����� (firewall)"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"C������ ������ �����\n"
-"\n"
-"�� ��� ��������� ������� ������ �����.\n"
-"������� �� ��������� ��� ��������� ��� �������� ������� ������ ����"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"C������ ������ �����\n"
-"\n"
-"������� �� ��������� ��� �������� ������� ������ ����"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "�������� ����"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "�������� ����� ���������"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "����������� �������� �����"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "��������� ����"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "����� ����������"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "������������"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "�����. �������� ������"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "�������������� ��������"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "����� ������� ��� ���������"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "��������� �������"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "�������� ������������"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "��������� ����"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "��������� ��������"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "��������� ��������� ��������"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "������� ������. ����"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "��������� X Window"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "��������� �������"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "����� �� �������� ���������"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"������ ��������� ������� ������ ����\n"
-"\n"
-"����� ������������� ������������ ������� ��� ���� Mandrake Linux ������.\n"
-"��� �������� ����������� ������ ������� ������ ����, �������� �������� ��\n"
-"������������������ ����������� MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"��� ����� ������ ��������� �������� � ���, � ����� �������� ����� ����� "
-"��������������\n"
-"�� ���������. ������������ ��������� ������\n"
-", ��� ��� ������ ������������ ����� ������ - ��� �����.\n"
-"\n"
-"����������, ���� �� � ������ ������ �� ����������� �����-���� �� ���� "
-"��������, ��������\n"
-"��� �������� ������ �� ������� � ���� �����������. �� ������ �������� ��� "
-"��������� �����\n"
-"� ����� �����!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"����������� �� �� �� ���� ������ web ������, ������� ������ ���� �����\n"
-"�� ���������? ���� �� ����������� web ������, ������ � �������� ����� ������ "
-"� ����\n"
-"������, �� ������ �������� �������� ��� �� ���� ������.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"����������� �� �� ������ ���� (DNS) �� ���� ������? ���� �� �� ��� "
-"�����������\n"
-"��� ������ ���������� �� IP � ����� ��� ����� ���������, ����������,\n"
-"�������� ���.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"������ �� �� ��������� �������� Secure Shell (ssh) ����������? ���\n"
-"������ ��������� telnet, ������� ��, ��������, �������� ������������ ��� "
-"�����.\n"
-"���� �� ������ �����������, �� ����������� ������ ������� �� ssh. ������ � "
-"telnet ��\n"
-" ��������� -- ������� ��������� ��������� ����� ������� ��� ������, ���� �� "
-"����������� telnet.\n"
-"������ � ssh ����������� � �� ��������� ������ �������������."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"������ �� �� ��������� �������� ���������� telnet?\n"
-"��� ����������������, ��� �� ��������� � ���������� ������. ��\n"
-"������������ ����������� ������� ����� No � ������������ ssh ������ \n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"����������� �� �� FTP ������, � �������� ������ ������������� ������\n"
-"�� ���������? ���� ��, �� �� ������������ ����������� ������������ ��� "
-"������ ���\n"
-"��������� �������� ������. ��� ������ ���������� �������� FTP ����� ���� "
-"��������\n"
-"�����������, ��������� FTP ������ �� ���������� ���������� ��� �������� "
-"�������.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"����������� �� �� �������� ������ �� ���� ������? ���� �� ����������� ���� \n"
-"��������� ����� ��������� pine, mutt ��� ������ ������� ���������� ��������� "
-"�������,\n"
-"�� ������ ����� - ��. �����, �������� ��� �������� ������ ����.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"����������� �� �� �� ���� ������ ������� POP ��� IMAP? ��� ����� ���� "
-"������������\n"
-"��� �������� �������� ������� ������� ��� ����� ��� web ���������� �����  \n"
-"��� ������.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"�� ����������� ���� 2.2. ���� ��� IP ����� � ����\n"
-"������������� ������������� ���� ��� � ����� \n"
-"(������������� �������������), ����� ����� ��� ���������. ��� ������ ���\n"
-"������?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"����� �� ����� ���������� ���������������� �� ������� ����������?\n"
-"������ ��� ������������ �������� ������� Unix/Linux �������������\n"
-"��� ������������� ������� ��� ������� �������� � ���� ���������. ���� �� �� "
-"���������\n"
-"� ������� ����� � ������� �� ������� �� ����, ������ �����, ��� �� "
-"���������� \n"
-"."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"��������� ���������. ����� �������� ��������� �� ����?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "���������� ������� %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "������ �������� %s ��� ������: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "��������� ������� ������ ����� (firewall)"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "����������, ���������, ���������������� ���������"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "������� ��������� (������)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS ������, SMB ������, Proxy ������, ssh ������"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "����"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "������� ������� Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "��������� ��� ������ Palm Pilot ��� Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "������� �������"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "������� ������ �����/�������������"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "������ ���� (DNS) � ������ NIS"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"������� ���������: �������� ���������� (kword, abiword), ����������� ������� "
-"(kspread, gnumeric), ������������ pdf, � �.�."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "�������� ���������: ������� mp3 ��� MIDI, �������, � �.�."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "����� � HowTo � Linux � ��������� ����������� �����������"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "������� ������� KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ������"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "����������� - �����"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "����� �������� ��� �����, ��������, web, �������� ������ � ����"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "���� ������"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "������ ��� ������ PostgreSQL ��� MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "���������, ���������� ��������� ������ ����������"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "����������� - ����"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "�������"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "������������"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "��������� ��� �������"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "�������� ������ Postfix, ������ �������� Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "������� ��������"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "����������� �������"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "��������� ��������� ����"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "��� ���������b� chtls (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"����� K Desktop, �������� ����������� ����� � ������� �������������� ��������"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "����������� �����"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "��������� ��� �������� � ������ CD ������"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "������� ������� �������"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "������"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, � �.�."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "����������� ���������, ����� ��� The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "���������� C � C++, ��������� � ����� include"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "������� ������"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "�����/��������� ��� ������ � ������/�������"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "������� �������"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "�����-������� � ���������"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "����������� - �������"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "��������� ��� �����������: ���� � �.�."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"����� �������� ��� ������ � �������� ����� � �������� (pine, mutt, tin..) � "
-"��������� Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "�������������, ��������, ������������"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "������ �������"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "����������� ����� � ������� ������������� �������� "
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "������� ��� ������ ����������, ������� ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "���� ��������"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "��������� ��� ������������/�������������� ����� � �����"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "������ ����������� �����"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "���������, ��������, �������� �������, ���������"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "��������� ��� ���������� ���������, ����� ��� gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "���������� ������ �����������"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "����������� - ������ CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "������� ������� �������"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "��������"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "������"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "�������� ������������ �� ���������:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "��������� �������"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "������ �� ������ �������� ��������� ��� ������ %s."
-
-#~ msgid "mount failed"
-#~ msgstr "������ ������������"
-
-#~ msgid "Low"
-#~ msgstr "������"
-
-#~ msgid "Medium"
-#~ msgstr "�������"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "�� ���� ������ ������������ ���� ��� ���������, � ������ �������\n"
-#~ "����������� ���������� �������� � ��������������."
-
-#~ msgid "Boot mode"
-#~ msgstr "����� ��������"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "�������"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux ����������� ����� � GMT (�� ��������) � ��������� ��� � "
-#~ "�������\n"
-#~ "����� � ������������ � ��������� ������� ������."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "�������������� � ��������"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "������������� �� ��������"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "��������� ������� ���������� (��������� ���� ��� ��������)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "�� ����� ���� ������ �����������?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "����������, �������� ������, ������� �� ������ ����������"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "����������"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "������� ������� Gnome"
-
-#~ msgid "authentification"
-#~ msgstr "��������������"
-
-#, fuzzy
-#~ msgid "user"
-#~ msgstr "������������"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "����������, ������� ��� ����� ����"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "�����"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "���������������� ������� ���������"
-
-#~ msgid "Active"
-#~ msgstr "��������"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "���"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "������� ������ \"%s\" ��������� �� "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "��������� �������"
-
-#~ msgid "Printer Device"
-#~ msgstr "�������"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "��������� CUPS ������"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "��������� CUPS ������"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "��������� �����"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "������"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "����������, �������� ��������� ����� ����������"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "���������� ������� �� ������"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "���: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "������ ���� � ��������� ������"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "��������� X Window"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "�������"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "������"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "��"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "�������"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "������ ������ ����������..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "�������� ������ ����������..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "���������� �� �������.\n"
-#~ "���������� ������� ��� �������\n"
-#~ "�������� /etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "��� root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "������ ������� �����������."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "�������� ����������� ������ ���������"
-
-#~ msgid "Total size: "
-#~ msgstr "����� ������: "
-
-#~ msgid "Please wait, "
-#~ msgstr "���������, ����������, "
-
-#~ msgid "Total time "
-#~ msgstr "����� ����� "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "������������ ������������ ��������� ��� X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "� ������ ���������� ��������� ��� ������� \n"
-#~ "(�������? - /dev/lp0 ������������ LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr "��������, ������� ������� ��� ��������. � ��� ����������������."
-
-#~ msgid "New"
-#~ msgstr "�����"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "��������� �������"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "���������� ������� �� ������"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "���������������� (%s), ������ ��������\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (��������� %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "��� �����? (��������� %s ������� 'none' ��� ����������) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "���������� ������� ��� ������ /etc/sysconfig/autologin : %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "�� ������ ������������� ����"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "�� ��������?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "��������� ������������� ������� ����������:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "��������� ������������� ������� ���������� %s. �� ��������?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "���� �� ������ ����� ������ �������, �� ������� ������� �������� \"/dev/"
-#~ "hda\"\n"
-#~ "(IDE ������ ���� �� ������ ������) ��� \"/dev/sda\" (������ SCSI ����)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "��� ����������: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "�������� ������������ �� ���������:"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "��������� ���� ���� �����."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "�������� ���������������� ���� ��� ��������� � ������������� �������."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "��� ���������� ������� ������� �������� ��� ����������� ���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "������� \"�������\" ���� �� �������� � ��������� ��������.\n"
-#~ "\n"
-#~ "\n"
-#~ "������� \"����������\" ���� �� �� �������� � �� ���������. ��������� "
-#~ "����� �������� ��� ��������� ����� �������\n"
-#~ "������������."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr ""
-#~ "�������� �� ������������ ������ ���������, ��������������� ����� "
-#~ "����������"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "���� �� ������, ����� ������ ����� (����� ��������� \n"
-#~ "� ������ ���������) ���� �������� ����� ��������� ���������, ���������� "
-#~ "��������\n"
-#~ "�� �� ������. ���� �� ������ ������� �� ���, ������ �������� \"���\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "��������:\n"
-#~ "\n"
-#~ "  - ����������: ���� �� ������� � GNU/Linux, �� ������ ������� ������� \n"
-#~ "���������� ����� �������. ������ ������� ����. \n"
-#~ "\n"
-#~ "\n"
-#~ "  - �������: ���������������, ��� � ��� ���� ���� � GNU/Linux  � �� "
-#~ "������ \n"
-#~ "    ��������� ������ ��������� ���������. ��� � ��� ������ \"����������"
-#~ "\" \n"
-#~ "    �� ������� ������� ������� ���������� ����� �������.\n"
-#~ "    ��, ����������, ��������� ���� ������� ������ ���� �� ������ �������\n"
-#~ "    � ��� ��� �� �������"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "������ �� ������ ���������� ������������� ����� �������. ��������:\n"
-#~ "\n"
-#~ "* ������� �������: ��� ��������� ����� � ��� ������, ���� �� ���������� "
-#~ "������������ ������� � �������� ��� ������� ������ � �����\n"
-#~ "  ��� ����.\n"
-#~ "\n"
-#~ "\n"
-#~ "* ���������� ��������t: ��� ������� �����, ���� �� ���������� "
-#~ "������������ ���� ������� � �������� ��� ���������� ��������. � ��� "
-#~ "�����\n"
-#~ "  ������ ����� ������������� �������� ��� ����������, �������, "
-#~ "�������������� �������� ������� � ����� ��� �������� ������� ��������.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "* ������: ������� �����, ���� �� ���������� ������������ ��������� � "
-#~ "�������� �������. ���� � �������� ����-������� (NFS ���\n"
-#~ "  SMB), ������� ������ (��� Unix ��� ��� Microsoft Windows), ������� "
-#~ "�������������� (NIS), ������� ��� ������\n"
-#~ "  � ��� �����. ������� �� ��������, ��� ����� ����������� ������ ���� "
-#~ "KDE, GNOME, � ��������. "
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "������ �� ������ ������� ������ �������, ������� �� ������\n"
-#~ "���������� ��� ��������.\n"
-#~ "\n"
-#~ "\n"
-#~ "����� DrakX ��������, ���������� �� � ��� ����� ��� �� ���������. ���� "
-#~ "���,\n"
-#~ "����� ������ ��������������. ���� �� ��� ����� ������ ����������, "
-#~ "��������� ����� ���������\n"
-#~ "����� ����� ��������� �� ����������� ����� ������\n"
-#~ "�������. ����� ������ �� ������ ������� ������� \n"
-#~ "\"�������������� ����� �������\"; - � ���� ������ ��� �������� "
-#~ "����������� ������\n"
-#~ "�� ����� ��� 1000 �������..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "������ �� ������ ������� �������������� ����� �������, �������\n"
-#~ "�� ������ ����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "�� ������ ������������� � ����������� ������ ������� � ����� ���� ����\n"
-#~ "�������.\n"
-#~ "\n"
-#~ "\n"
-#~ "���� �� ������������� ������������� ������ � ���������� �������, ������� "
-#~ "�� ������\n"
-#~ "\"����������� ����� ������/���������� �� �������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "���� �� ������ �������� �������������� � ������������ ����� ��������, "
-#~ "������� �� \"��������������\n"
-#~ "�����������\". ���� �� ��� ��������, ������ �����, ��� ������ ������ "
-#~ "������ ������ ����� �����\n"
-#~ "�������� ����� ���������� ������ �������, ��������� �� ����."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "���� � ��� ���� ��� CD �� ������������ ���� ������, ������� Ok.\n"
-#~ "���� � ��� ��� �� ������ �� ���, ������� ��������.\n"
-#~ "���� ����������� ������ ��������� CD, �������� �� ����� � ������� Ok."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "���� �� ������ ���������� ��� ��������� � ��������� ���\n"
-#~ "� ��������� ���� �������� ������ �������. ����������, �������� ���� "
-#~ "����������\n"
-#~ "����� �������, ����� DrakX ���� ��� ������������� ����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "���� � ��� ��� ���������� � �������� ��� � ��������� �����, ��������\n"
-#~ "\"��������� ����\".\n"
-#~ "\n"
-#~ "\n"
-#~ "���� �� ������ ��������� ���� ����� ���������, ���� ���� �� ���\n"
-#~ "��������� ��������� �������� ����������, �������� \"���������\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "�� ������ ������ �� ����������. ����������, �������� ���������������� "
-#~ "����, � �������� �� ���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ������� - ������ ���������������� ���� (���������� \"COM1\" � "
-#~ "Microsoft\n"
-#~ "Windows) � Linux ���������� \"ttyS0\"."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "������ �� ������ ��������� ��������� �������. ���� �� �� ������\n"
-#~ "��� �� ������� � ���, ��� ����� ������, ���������� ���������� ����� ���� "
-#~ "�������� ��\n"
-#~ "������ ��������-����������. ���� �� �� ������� ���������� � DNS (������ "
-#~ "����)\n"
-#~ "������, �� ��� ���������� ����� �������� �� ������ ��������-���������� �� "
-#~ "�����\n"
-#~ "����������."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "���� � ��� ������� �����, �������� ��� ������, ����� DrakX ���� ��� "
-#~ "������������� ����������."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "����������, �������� ��� ����� � �������� ����������."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "���� �� �� ������� � ������������ ������������� ����������\n"
-#~ "��� �� �� ������, ��� �������, ���������� ����������\n"
-#~ "����� ���� �������� �� ��������-����������. ���� �� �� ������� ������\n"
-#~ "���������� � DNS (������� ����), ��� ���������� ����� �������� �����\n"
-#~ "�� ������ ��������-���������� �� ����� ����������."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "������ �� ������ ������ �������� (���) ��� ����� ������, ���� ������. "
-#~ "����\n"
-#~ "�� �� ������ ��� �� �������, ��� ����� ������, ���������� ���������� "
-#~ "����� ����\n"
-#~ "�������� �� ������ ��������-����������."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "������ �� ������ ���������� ���� ���������� ����������� � ����.\n"
-#~ "\n"
-#~ "   * IP �����: ���� �� �� ������ ��� �� ������� � ���, ��� ����� ������, "
-#~ "�������� �������������� ����� ����.\n"
-#~ "     �� �� ������ ������� IP �����, ���� �������� ������� "
-#~ "\"�������������� IP\" �����.\n"
-#~ "\n"
-#~ "   * ����� ����: \"255.255.255.0\" - ������ ������� �����. ���� �� �� "
-#~ "������ ��� �� �������, ��� ����� ������,\n"
-#~ "     �������� �������������� ����� ����.\n"
-#~ "\n"
-#~ "   * �������������� IP: ���� � ����� ���� ������������ ��������� BOOTP "
-#~ "��� DHCP, �������� ���� �������. ���� �� ������, ��������, ��������� �\n"
-#~ "    \"IP �����\" ����� ���������������. ���� �� �� ������ ��� �� ������� "
-#~ "� ������������� ������ ����� ��������, �������� �������������� ����� ����."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "������ �� ������ ������ ��� ������ ����������, ���� �����. ���� �� �� "
-#~ "������ ��� \n"
-#~ "�� ������� � ���, ��� ����� ������, �������� �������������� ����� ����."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "������ �� ������ ������ ��� ������ ����������, ���� �����. ���� �� �� "
-#~ "������\n"
-#~ "��� �� ������� � ���, ��� ����� ������, �������� ���� �������������."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "������ ����� ������ ��������� ������� (dialup). ���� �� �� ������, ��� "
-#~ "������, \n"
-#~ "���������� ���������� ����� �������� � ������ ���������� �������� (ISP)."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "���� ������ ������������ ������� proxy, ��������� �� ������. ���� �� "
-#~ "������,\n"
-#~ "����� �� ���, ���������� � �������������� ���� ��� �������� ����������."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "�� ������ ���������� ����� ����������, ���� ���� ���������� c �������� "
-#~ "���\n"
-#~ "��������� ���������. ������� �������� ������, ������ �� ������ ������� "
-#~ "������ � \n"
-#~ "����� �������� ������, ������� ������ ����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "������ �����, ��� ��� ����� �������� ������ � ������ ���������� � "
-#~ "������������ � �����������������,\n"
-#~ "����������� � ����� ������."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "������ �� ������ ������� ������� ����, � ������� �� ������."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "������ �� ������ ��������� ��������� ������� (������������ � ������ "
-#~ "����������) ��� ��������� �������\n"
-#~ " (��������� �� ���� Unix, Netware ��� Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "���� �� ������ ��������� ������, �������� ������ ������ - \n"
-#~ "CUPS ��� LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS - �����, ������ � ������ ������� ������ ��� Unix ������ (CUPS\n"
-#~ "�������� \"������� ������� ������ Unix\"). ��� ������� ������������ �\n"
-#~ "Mandrake Linux �� ���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR - ������ ������� ������, ���������������� � ���������� ������������� "
-#~ "Mandrake Linux .\n"
-#~ "\n"
-#~ "\n"
-#~ "���� � ��� ��� ��������, �������� \"�����������\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "� GNU/Linux ����� �������������� ����� ����� ���������. ������ ��� "
-#~ "�������\n"
-#~ "������ ���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "���� ��� ������� ��������� ��������� � ������ ����������, �������� "
-#~ "\"���������\n"
-#~ "�������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "���� �� ������ �������� ������ � �������� �� ��������� Unix ������, "
-#~ "��������\n"
-#~ "\"��������� �������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "���� �� ������ ������������ �������, ������������ � ��������� ������ � "
-#~ "Microsoft Windows \n"
-#~ "(��� ������ � Unix, ��������� SMB ��������), �������� \"SMB/Windows 95/98/"
-#~ "NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "����������, ����� ������������ ��������� �������� ��� �������, ����� "
-#~ "DrakX ���� ��� ����������.\n"
-#~ "\n"
-#~ "������ ��� ����������� ������ ��������� ����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ��� ��������: �������� ������ (spooler) \"lp\" ��� ��� �������� �� "
-#~ "���������. �������, � ��� ������ ���� ������� � ������ \"lp\".\n"
-#~ "     ���� � ��� ������ ���� �������, �� ������ ������������ ��������� "
-#~ "���� ��� ����. �� ������ ������ ��������� �� ��������\n"
-#~ "     \"|\". �������, ���� �� ������������� ��������� ���, ��� ����� "
-#~ "��������� ������, ��������: \"��� �������|lp\".\n"
-#~ "     �������, ���������� \"lp\" � ����� ����� ��� ������, ����� ��������� "
-#~ "�� ���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ��������: ��� ��������� �������������, �� ����� ��������� �������� "
-#~ "���� ��������� �������� ���������� � ������ ���������� ��� ���� �� "
-#~ "����������\n"
-#~ "     ������ ����������� ������������ ��� �������.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ������������: ���� �� ������ ������� �����-���� ���������� � "
-#~ "������������\n"
-#~ "     ������ ��������, �������� �� ����� (������ ������ ���, ��� ������\n"
-#~ "     , �������� \"2�� ����\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "������ ��� ����������� ������ ��������� ����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ��� ������� ������: �������� ������ ���������� \"lp\" � �������� "
-#~ "����� �� ���������. ������� � ��� ������ ���� ������� � ����� \"lp\".\n"
-#~ "    ���� � ��� ������ ���� �������, �� ������ ������ ��� ���� ��������� "
-#~ "����. ������ ��������� ����� ��������\n"
-#~ "    \"|\". ���, ���� �� ������������� ����� ����������� ���, �� ��������� "
-#~ "��� ������, ��������: \"��� �������|lp\".\n"
-#~ "    �������, ���������� � ����� ���� ������ \"lp\" ����� ��������� �� "
-#~ "���������.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * ������� �������: � ���� �������� ����� ��������� ��� ������� �� "
-#~ "������. �������� ����� �� ���������,\n"
-#~ "     ���� �� �� ������, ����� ������� �������\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ��� �����������: ���� ��� ������� ��������� ����������� � ������ "
-#~ "����������, �������� \"��������� �������\".\n"
-#~ "     ���� �� ������ ������������ �������, ������������ � ��������� Unix "
-#~ "������, �������� \"��������� lpd �������\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     ���� �� ������ ������������ �������, ������������ � ��������� "
-#~ "Microsoft Windows ������ (��� � ������ Unix ���������� SMB\n"
-#~ "     ��������), �������� \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     ���� �� ������ ������������ �������, ������������� � ��������� ���� "
-#~ "NetWare, �������� \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "��� ������� �� ���������. ������� ��� ����������, � �������� �� "
-#~ "���������\n"
-#~ ".\n"
-#~ "\n"
-#~ "\n"
-#~ "��� ������� - ����������� ��������� ������������ � ������� ������������� "
-#~ "�����. � GNU/Linux\n"
-#~ "�� ���������� \"/dev/lp0\", � Microsoft Windows - \"LPT1\" ."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "������ ��� ����� ������� ��� ������� �� ������������ ������."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "���������� �������� ���������� ���������, �������������� ������ "
-#~ "��������.\n"
-#~ "���������� ���������� ������������ �� �������, ���� �� �� ������, ��� "
-#~ "�������.\n"
-#~ "\n"
-#~ "\n"
-#~ "� ��� ����� ����������� �������������� ���� ��������� �� ��������� ����� "
-#~ "� �� ������� �������� ��, ���� ������� ����� �������� �����������."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "������ �� ������ ������ ������ ������������ root ��� ����� Mandrake Linux "
-#~ "�������.\n"
-#~ "������ ����� ������ ������, ����� ���������, ��� ��� ������ ��������� .\n"
-#~ "\n"
-#~ "\n"
-#~ "������������ root - ��� ��������� ������������� � ������������ "
-#~ "������������, �������\n"
-#~ "��������� �������� ������������ �������. �������������, ����������� "
-#~ "��������� ������. \n"
-#~ "������������� ������� ������ root ������������ ������ ����� ���� "
-#~ "������������ ��� �����������\n"
-#~ "�������, �� ������ � ������ ������, ����������� � ���.\n"
-#~ "\n"
-#~ "\n"
-#~ "������ ������ �������� �� ���� � ���� � ���� ��� ������� 8\n"
-#~ "�������� �������. ��� ������� � ������ ������ ����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "�� ����� ������ ��� ������� ������� ��� �������: �� ������ ���������� ��� "
-#~ "���\n"
-#~ "������ ������."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "������ �� ������ ������� ���� ��� ��������� \"�������\" ������� ������� "
-#~ "��� �������������\n"
-#~ ", � ������� �� \"�����������������\" ������� ������ root. �����\n"
-#~ "������� ���� ��� ��������� ������� ������� ��� ������� ������������,\n"
-#~ "������� ����� �������� �� ����������. ��� ������ ������� ������ "
-#~ "������������\n"
-#~ "��������� ���� ��������� (����������� ���������, ��������� ��������, � �."
-#~ "�.)\n"
-#~ "� ���� \"�������� �������\", � ������� �������� ��� \n"
-#~ "���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "������ ����� �������� ������� ������ ��� ����! ���� ���� �� ������ "
-#~ "������������\n"
-#~ "������������� �� ������, �� ������� ������� ��� ������ root\n"
-#~ "��� ������������ ������: ��� ������� ������� ������ ������������. \n"
-#~ "����� ��������� ������� ������� ���������.\n"
-#~ "\n"
-#~ "\n"
-#~ "������� ������� � ������� ����, ��������� ������� ������ �������� "
-#~ "������������,\n"
-#~ "�������� �� ������ � ���������, � ������� ��� root ���� ������\n"
-#~ "� ����� ����������������� � ������������ �������."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "������������ ������������� ������� ����������� �������. ���� �� �� ������ "
-#~ "���������\n"
-#~ "���������, ��� ����� ������������ ������� ������������ ������� ��� "
-#~ "�������������\n"
-#~ "."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "�������� ��������� LILO � grub:\n"
-#~ "  - ����������� ����������: ����������� ��� ���������� (��������, ������ "
-#~ "�������� �����,\n"
-#~ "������� �������� ����������� ������. ���� �� �� ������� ��������� ������ "
-#~ "�����, ��\n"
-#~ "��������� \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - �������� ����� ��������� ������ �� ���������: ������ ����� � �������\n"
-#~ "����� ������� � ������� ������� ��������� ��������� ���� ����� ��������� "
-#~ "������� ������.\n"
-#~ "��� ������� ��� ������, ����� ����������� � �������� ����� ����� �����\n"
-#~ "��������� ����������. ��������� �� ����, ���� \"��������\" \n"
-#~ "�� �����������, ��� ����� ����."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO - ��� ��������� �������� ��� SPARC: \n"
-#~ "�� �������� ��������� GNU/Linux ��� ����� ������ ��, ������������� �� "
-#~ "������.\n"
-#~ "������ ��� ������ ������������ ������� ��������� ������������ � "
-#~ "���������������.\n"
-#~ "���� ����� �� ���������, �� ������ �������� ����� ������� �� ���� "
-#~ "������.\n"
-#~ "������ ����������� ��� ������� ����������.\n"
-#~ "\n"
-#~ "\n"
-#~ "�������� �����, ��� �� �� ������ ������ ������ ������ � ���� ��, � ����� "
-#~ "������ ����� ������� ��������������� ������. �� � ���� ������ ��� �� "
-#~ "�������� ����������� ����������� �������!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "�������� ��������� SILO:\n"
-#~ "  - ��������� ����������: �������, ��� �� ������ ���������� ����������,\n"
-#~ "����������� ��� �������� GNU/Linux. ���� �� ������ �����, ��� �������,\n"
-#~ "��������� \"������ ������ ���������� (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - �������� ����� ��������� ������ �� ���������: ������ ����� � �������\n"
-#~ "����� ������� � ������� ������� ��������� ���� ����� ��������� ������� "
-#~ "������.\n"
-#~ "��� ������� ��� ������, ����������� � �������� ����� ����� �����\n"
-#~ "��������� ����������. ��������� �� ����, ���� \"��������\" \n"
-#~ "�� ������� ��� ����� ����."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "������ ����� ��������� X Window System, ������� ��������\n"
-#~ "������� GNU/Linux GUI (����������� ���������������� ���������). ��� ����\n"
-#~ "���� ���� ��������� ���������� � �������. ������� ����� ���� �����\n"
-#~ "����������������, ��� ��� ���� ������ ����� �������� � ��������\n"
-#~ "����������� ��������� � ������������� ��������� ��������� :)\n"
-#~ "\n"
-#~ "\n"
-#~ "����� ���������������� ����������, ����� ������� X (���� �� ��\n"
-#~ "��������� DrakX �� ������ �����) ����� �� ����� ���������, ����������\n"
-#~ "�� ��� ���������. ���� ���, �� ������ ��������� � �������� ��\n"
-#~ "������� ��� ������."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "���� ��� �� �� � ������� � ���������� X, ����������� ��� ��������� ���\n"
-#~ "���������� ��������� X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "���� �� ������������� ����������� ���� (login), �������� \"��\". ����� "
-#~ "- \n"
-#~ "\"���\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "�� ������ ������� ������� ������������ ��� ����� �������. ��������� "
-#~ "���������� �����\n"
-#~ "  ����� � �����������. ��� ������, ���� �� �� ������, ��� �������, "
-#~ "�������� ��������� �� ���������.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "������� ���������� ���������������.\n"
-#~ "\n"
-#~ "����� ������������, ���� ����� ������� Mandrake Linux ���������� "
-#~ "�������������.\n"
-#~ "���� ������ ��������� ������ ������������ �������, ������� \n"
-#~ "�������������� ����������."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "������� (������������)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "��������� (������������)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "��� ������������ �������:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "�������� /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "������������� ���"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "����� �������������� ���� ��������,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "��� ������ � ���� �������� ����� ��������"
-
-#~ msgid "Reload"
-#~ msgstr "�������������"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "������ ������������� ����-����������������� ������� ��� ������������ "
-#~ "linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "��������� ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "� ��������� �������� ������ CUPS, ��� �� ����� ����� �����������\n"
-#~ "������� ���������; �������� ����� ���������� �������������,\n"
-#~ "���� ������ ��� ������ �� ��������� � ������ ����; � ��������� ������\n"
-#~ ", ��� ����� ������� IP ����� ������� CUPS \n"
-#~ "�, ��������, ����� �����."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "��������� �������"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "��� ������"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "��� ��������"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "���������� ����"
-
-#~ msgid "Profile "
-#~ msgstr "������� "
-
-#~ msgid "Statistics"
-#~ msgstr "����������"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "�������� ��������: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "�������� ���������: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "��� ����������: "
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "����������� � �������� "
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "������������� �� �������� "
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "������ �������������� �� ��������."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "������������ �� �������� ���������."
-
-#~ msgid "Connection complete."
-#~ msgstr "���������� ���������."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "������ ���������.\n"
-#~ "��������� ���� ��������� � ������ ���������� Mandrake."
-
-#~ msgid "sent: "
-#~ msgstr "����������: "
-
-#~ msgid "received: "
-#~ msgstr "��������: "
-
-#~ msgid "Default Runlevel"
-#~ msgstr "RunLevel �� ���������"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "�� ������� ���������� ���������� ����� ��������."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "�������������� ���� ��������"
-
-#~ msgid "Adapter"
-#~ msgstr "�������"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "���������"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "��������"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "������ �� ������ ��������� ���� ����. ����������� ������ � �������� ��� "
-#~ "��������\n"
-#~ "������������ ��������. ���� ��� �� �����, ������� �� \"������\" ��� "
-#~ "������\n"
-#~ "������� ��������."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (��� ADSL) ����������"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "�������"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "�� ������ �������� ������� ����� ��� ������������� �������� � CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "��, ���������� ������� �������� ������ ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "��, ���������� ������� �������� ������ PostScript"
-
-#~ msgid "Paper Size"
-#~ msgstr "������ ������"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "������� ������ ����� ������?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "��������� �������� Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "��������� ������� �����"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "�������� ����� ��� PostScript"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "���������� \"����������� ������\"?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "���������� ������� �� �����"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "������/����� ���� � ������� (1/72 �����)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "�������/������ ���� � ������� (1/72 �����)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "�������������� ��������� ��� GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "�������������� ��������� ��� ������"
-
-#~ msgid "Reverse page order"
-#~ msgstr "�������� ������� �������"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "����� ���� ���������� ����������� ��������"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "������� �������� ��������� ��� (��������, lp).\n"
-#~ "�������������� ���������, ����� ��� �������� �������� � ��� "
-#~ "���������������\n"
-#~ "��� �� ����� ���� ������. ����� ��� ����� ������������ ��� ������� "
-#~ "�������� �\n"
-#~ "��� �� �����������?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "������ ������� ������, � ������� ���������� ������� ��� ������, ������� "
-#~ "�������� ����� (������ lp) � ���������� � ��� �������� ������� ������. "
-#~ "������� ��� � ������� ������� ������, � ����� ������, ������� ���������� "
-#~ "�������?"
-
-#~ msgid "Name of queue"
-#~ msgstr "��� �������"
-
-#~ msgid "Spool directory"
-#~ msgstr "������� spool"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "������ ������������: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "����� �������� ������������ �������, ���� ������� \"������������ ������� "
-#~ "����\" \n"
-#~ "� \"������������ ������ MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "���� � ����� ���� ������������ NIS, �������� \"������������ NIS\". ���� \n"
-#~ "�� ������, �������� �������������� ����."
-
-#~ msgid "yellow pages"
-#~ msgstr "������ ��������"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "����� ������� DNS ������� ����������"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "����� ������� DNS ������� ����������"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "��� �� ������ �������������� � ��������?"
diff --git a/perl-install/share/po/sk.po b/perl-install/share/po/sk.po
deleted file mode 100644
index 62d13d0af..000000000
--- a/perl-install/share/po/sk.po
+++ /dev/null
@@ -1,11152 +0,0 @@
-# Translatrion file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Jan Matis <damned@hq.alert.sk>, 2000
-# Pavol Cvengros <orpheus@hq.alert.sk>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-02-17 23:14+0100\n"
-"Last-Translator: Jan Matis <matis@hq.alert.sk>\n"
-"Language-Team: sk <i18n@hq.alert.sk>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Nastavi� v�etky hlavy osobitne"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Pou�i� Xinerama roz��renie"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Nastavi� iba kartu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Nastavenie \"viac-hl�v\""
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"V� syst�m podporuje nastevenie pre \"viac hl�v\".\n"
-"�o chcete spravi�?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafick� karta"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Zvo�te grafick� kartu"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Zvo�te X server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Zvo�te X server"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Ak� konfigur�ciu XFree chcete ma�?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va�a karta m� podporu hardwarovej 3D akceler�cie ale iba v XFree %s.\n"
-"Va�a karta je podporovan� XFree %s, ktor� maj� lep�iu podporuj v 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Va�a karta m� podporu hardwarovej 3D akceler�cie v XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s s 3D hardwerovou akceler�ciou"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Va�a karta m� podporu hardwarovej 3D akceler�cie ale iba v XFree %s.\n"
-"POZOR, T�TO PODPORA JE IBA EXPERIMENT�LNA A MO�E SPOSOBI� ZAMRZNUTIE "
-"PO��TA�A."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s s EXPERIMENT�LNOU 3D akceler�ciou"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va�a karta m� podporu hardwarovej 3D akceler�cie ale iba v XFree %s.\n"
-"POZOR, T�TO PODPORA JE IBA EXPERIMENT�LNA A MO�E SPOSOBI� ZAMRZNUTIE "
-"PO��TA�A.\n"
-"Va�a karta je podporovan� XFree %s, ktor� maj� lep�iu podporuj v 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (ovl�da� obrazovky pre in�tal�ciu)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfigur�cia"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Zvo�te ve�kos� grafickej pam�ti"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Zvo�te parametre servra"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Zvo�te monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva kritick� parametre s� vertik�lna frekvencia (frekvencia, ktorou je "
-"obnovovan� cel� obrazovka) a horizont�lna frekvencia (frekvencia, ktorou s� "
-"zobrazovan� jednotliv� riadky).\n"
-"Je ve�mi d�le�it�, aby ste nenastavili frekvencie, ktor� prevy�uj� "
-"schopnosti v�ho monitora. Mohol by sa po�kodi�.\n"
-"Ak ste si nie celkom ist�, zvo�te rad�ej slab�ie nastavenie."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizont�lna frekvencia"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertik�lna frekvencia"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Nie je nastaven� monitor"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Nie je nastaven� grafick� karta"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Nie s� nastaven� grafick� rozl��enia"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Otestova� konfigur�ciu?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Varovanie: Testovanie tejto grafickej karty m��e sp�sobi� zamrznutie syst�mu"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test konfigur�cie"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"sk�ste zmeni� niektor� parametre"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Vyskytla sa chyba"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "N�vrat za %d sek�nd"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Je toto spr�vne nastavenie?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Vyskytla sa chyba, sk�ste zmeni� niektor� parametre"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rozl��enie"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Zvo�te rozl��enie a farebn� h�bku"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafick� karta: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Viac"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Expertn� m�d"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Zobraz v�etko"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rozl��enia"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Nastavenie kl�vesnice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Typ my�i: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Port my�i: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizont�lna frekvencia monitoru: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertik�lna frekvencia monitoru: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafick� karta: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifik�cia Grafickej karty: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafick� pam�: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farebn� h�bka: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rozl��enie: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ovl�da�: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Pripravujem konfigur�ciu X-Windows"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "�o chcete robi�?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Zme� monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Zme� grafick� kartu"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Zme� parametre servra"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Zme� rozl��enie"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Zobraz inform�cie"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Sk�s znova"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Koniec"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zachova� zmeny?\n"
-"Aktu�lna konfigur�cia je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X pri �tarte"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"M��em nastavi� v� po��ta� aby po re�tarte automaticky sp���al X.\n"
-"Chcete ma� spusten� X-Windows po re�tarte po��ta�a?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Pros�m, prihl�ste sa znova do %s aby ste aktivovali zmeny"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Pros�m, odhl�ste sa a potom stla�te Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 farieb (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tis�c farieb (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tis�c farieb (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 mili�nov farieb (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardy farieb (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB a viac"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "�tandardn� VGA, 640�480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800�600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibiln�, 1024�768 @ 87 Hz prekladane (nie je 800�600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024�768 @ 87 Hz prekladane, 800�600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Roz��ren� Super VGA, 800�600 @ 60 Hz, 640�480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Neprekladan� SVGA, 1024�768 @ 60 Hz, 800�600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Vysoko frekven�n� SVGA, 1024�768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor, ktor� dok�e 1280�1024 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor, ktor� dok�e 1280�1024 @ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor, ktor� dok�e 1280�1024 @ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor, ktor� dok�e 1600�1200 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor, ktor� dok�e 1600�1200 @ 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Prv� sektor zav�dzacieho oddielu"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Prv� sektor disku (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "In�tal�cia SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kam si �el�te nain�talova� zav�dza�?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "In�tal�cia lilo/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO s textovym menu"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO s grafick�m menu"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "�tart z DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Hlavn� parametre zav�dza�a"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Pou�i� zav�dza�"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "In�tal�cia zav�dza�a"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Boot zariadenie"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nepracuje spr�vne so star��mi BIOSmi)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompaktn�"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompaktn�"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video m�d"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Pauza pred �tartom predvolen�ho jadra"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Heslo"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Heslo (znovu)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Obmedz vo�by pr�kazov�ho riadku"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "obmedz"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Vy�isti� /tmp pri ka�dom �tarte"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Presn� ve�kos� pam�ti (na�iel som %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Dovoli� multi profily"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Zadajte ve�kos� pam�ti v Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Parameter ``Restrict command line options'' je bez pou�itia hesla vypnut�"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Pros�m sk�ste znovu"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Heslo nes�hlas�"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Inicializa�n� spr�va"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Oneskorenie pre �tart kernelu"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Povoli� �tart z CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Povoli� �tart z OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Predvolen� OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Moment�lne sa tu nach�dzaj� tieto z�znamy.\n"
-"M��ete prid�va� �al�ie, alebo meni� existuj�ce."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Pridaj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Hotovo"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modifikova�"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Ak� typ z�znamu chcete prida�"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "In� OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "In� OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "In� OS (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Obraz"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Pridaj"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "��tanie/Z�pis"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabu�ka"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nie celkom bezpe�n�"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Z�znam"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Predvo�ba"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-ve�kos�"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Bez videa"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Odstr�� z�znam"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Pr�zdny z�znam nie je dovolen�"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Mus�te zada� s�bor s jadrom"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Mus�te nastavi� kore�ov� oddiel"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Tento z�znam je u� pou�it�"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Na�iel som %s %s rozhranie"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "M�te e�te nejak� �al�ie?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "M�te nejak� %s rozhranie?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nie"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "�no"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Prezrite si inform�cie o technick�ch prostriedkoch"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "In�talujem ovl�da� pre %s kartu %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Ktor� %s ovl�da� m�m sk�si�?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Ovl�da� %s niekedy potrebuje pre spr�vnu �innos� doplnkov� inform�ciu, aj\n"
-"ke� zvy�ajne pracuje spr�vne aj bez nej. �el�te si zada� doplnkov� vo�by,\n"
-"alebo dovol�te ovl�da�u otestova� v� po��ta� a �daje si zisti�? Ob�as sa\n"
-"stane, �e toto testovanie po��ta� zablokuje, ale nemalo by sp�sobi� �iadnu "
-"�kodu."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatick� zistenie"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Zadajte vo�by"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Teraz m��ete zada� parametre pre modul %s.\n"
-"Parametre s� vo form�te ``meno=hodnota meno2=hodnota2 ...''.\n"
-"Napr�klad: ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Parametre modulu:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Nahr�vanie modulu %s zlyhalo.\n"
-"Chcete sa o to pok�si� znova s in�mi parametrami?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "pr�stup ku X programom"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "pr�stup ku rpm n�strojom"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "dovoli� \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "pr�stup ku konfigura�n�m s�borom"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(u� pridan� %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Toto heslo je pr�li� jednoduch�"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Pros�m zadajte u��vate�sk� meno"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "U��vate�sk� meno m��e obsahova� len mal� p�smen�, ��slice, `-' a `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Tak�to u��vate� je u� pridan�"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Pridaj u��vate�a"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Zadajte u��vate�a\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Akceptuj u��vate�a"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Re�lne meno"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "U��vate�sk� meno"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"M��em nastavi� v� po��ta�, aby sa po re�tarte automaticky prihl�sil\n"
-"jeden u��vate�. �el�te si t�to mo�nos�?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Zvo�te predvolen�ho u�ivate�a:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Vyberte si window mana��ra:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Pros�m, zvo�te jazyk, ktor� chcete pou��va�."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "M��ete zvoli� �al�ie jazyky pou�ite�n� po in�tal�cii"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "V�etko"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Dovo� v�etk�m  u��vate�om"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Vlastn� v�ber"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Bez zdielania"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Je potrebn� in�talova� bal�k %s. S�hlas�te ?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Zdielanie m��e by� cez Sambu alebo NFS. Ktor� si �el�te ?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Ch�ba povinn� bal�k %s"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Zru�"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "�iadna"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Ve�mi slab�"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "�tandardn�"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Vysok�"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Vysok�"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidn�"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"T�to �rove� by mala by� pou��van� opatrne. Zjednodu�uje pr�cu so syst�mom,\n"
-"ale nemal by by� pripojen� k in�m po��ta�om, alebo k internetu. Nie s�\n"
-"toti� pou��van� �iadne hesl�."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Je nastaven� pou��vanie hesiel, ale pou�itie tohoto po��ta�a v sieti nem��em "
-"doporu�i�."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Toto je �tandardn� �rove� bezpe�nosti pre po��ta�, ktor� je pou��van�\n"
-"pre pripojenie k internetu ako klient."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"S touto �rov�ou bezpe�nosti sa st�va syst�m pou�ite�n� ako sie�ov� server."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Zalo�en� na predo�lej �rovni, ale syst�m je �plne uzavret�.\n"
-"Bezpe�nos� je na najvy��ej mo�nej �rovni."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Vo�ba bezpe�nostnej �rovne"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "�rove� bezpe�nosti"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Pou�i libsafe pre servre"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Kni�nica, ktor� br�ni proti �tokom typu buffer overflow a format string."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Vitajte v zavadzaci operacneho systemu %s!\n"
-"\n"
-"Vyberte si operacy system ktory chcete spusti, alebo \n"
-"cakajte %d sekund pre predvolenu akciu.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Vitajte v zavadzaci operacneho systemu GRUB"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Pouzite klavesy %c a %c pre oznacenie zaznamu zviraznenim"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Stlacte enter pre zavedenie oznaceneho OS, 'e' pre upravu"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "prikazov pred zavedenim, alebo 'c' pre prikazovy riadok"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Oznaceny OS bude zavedeny za %d sekund."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nie je dos� miesta v /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "�tart menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Na oddiel %s nem��ete nain�talova� zav�dza�\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pomoc zatia� nebola implementovan�.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfigur�cia �t�lu �tartovania"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_S�bory"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/S�bor/_Koniec"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>K"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Nov� �t�l kateg�rii monitorov"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Nov� �t�l monitora"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "�tandardn� monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "�tandardn� Gtk+ monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Spusti� Auroru pri �tarte"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grub m�d"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot m�d"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Moment�lne pou��vate %s ako �tartovac� mana��r.\n"
-"Kliknite na Konfigur�cia pre spustenie sprievodcu nastaven�m."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigur�cia"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "M�d syst�mu"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Spusti� X-Window syst�m pri �tarte"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nie, nechcem automatick� prihl�senie"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "�no, chcem automatick� prihl�senie s (u�ivate�, desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "nem��em otvori� /etc/inittab na ��tanie: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d min�t"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 min�ta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sek�nd"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Nem��em robi� k�pie obrazovky pred rozdelen�m disku"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "K�pie obrazovky bud� po in�tal�cii dostupn� v %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Franc�zsko"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Kostarika"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgicko"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "�esk� republika"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Nemecko"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Gr�cko"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "N�rsko"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "�v�dsko"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Holandsko"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Taliansko"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Rak�sko"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Spojen� �t�ty"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Pros�m, najprv si za z�lohujte va�e d�ta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "��tajte pozorne!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ak pl�nujete pou�i� ABOOT, nechajte pros�m na za�iatku disku dos� vo�n�ho "
-"miesta.\n"
-"(2048 sektorov bude sta�i�)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Chyba"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Sprievodca"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Zvo� akciu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"M�te jeden ve�k� FAT diskov� oddiel\n"
-"(pou��van� MS DOSom alebo WINDOWS).\n"
-"Navrhujem zmeni� jeho ve�kos�\n"
-"(kliknite na�, potom kliknite na \"Zme� ve�kos�\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Pros�m kliknite na oddiel"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detaily"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "�urn�lovac� s�borov� syst�m"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Pr�zdna"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "In�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Typ s�borov�ho syst�mu:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Vytvor"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Typ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Namiesto toho pou�ite `%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Zru�"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Najprv spravte `Unmount''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Po zmene diskovej oblasti %s bud� v�etky d�ta na tejto oblasti nen�vratne "
-"straten�"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Zvo�te oddiel"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Zvo�te in� oddiel"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Koniec"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Prepni do expert m�du"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Prepni do norm�lneho m�du"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Sp�"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Pokra�ova�?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Koniec bez ulo�enia"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Koniec bez zmeny partition tabu�ky?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "�el�te si ulo�i� zmeny do /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automaticky prerozde�"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Zma� v�etko"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Inform�cie o pevnom disku"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "V�etky prim�rne oddiely s� u� pou�it�"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Nem��em prida� �al�� oddiel"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ak chcete ma� viac diskov�ch oddielov, tak zma�te jeden z nich, aby sa dal "
-"vytvori� roz��ren� oddiel disku"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Ulo� tabu�ku rozdelenia disku"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Obnov tabu�ku rozdelenia disku"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Obnovi� tabu�ku rozdelenia disku"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Znovuna��ta� tabu�ku rozdelenia disku"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automatick� pripojenie vymenite�n�ho m�dia"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Vyber s�bor"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Z�lo�n� tabu�ka rozdelenia disku nem� rovnak� ve�kos�\n"
-"Naozaj pokra�ova�?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Varovanie"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Vlo�te disketu do mechaniky\n"
-"V�etky d�ta na tejto diskete bud� nen�vratne straten�"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Pok��am sa obnovi� partition tabu�ku"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detailn� inform�cie"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Bod pripojenia"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Parametre"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Zme� ve�kos�"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Presu�"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Form�t"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Pripoj"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Pridaj do RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Pridaj do LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Odpoj"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Odober z RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Odober z LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modifikuj RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Pou�i loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Vytvor nov� oddiel"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Po�iato�n� sektor:"
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Ve�kos� v MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Typ s�borov�ho syst�mu: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Bod pripojenia: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferencia: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Odstr�ni� loopback s�bor?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Zvo�te typ oddielu"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Ak� typ s�borov�ho syst�mu chcete??"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Prep�nam z ext2 na ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kam si �el�te pripoji� loopback s�bor %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kam si �el�te pripoji� zariadenie %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nem��em odpoji� oddiel k�m je pou��van� nejakou sp�tnou slu�kou.\n"
-"Odstr��te najsk�r sp�tn� slu�ku"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Po��tam hranice FAT s�borov�ho syst�mu"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Men�m ve�kos�"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Tomuto oddielu sa ned� meni� ve�kos�?"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "V�etky d�ta na tejto oblasti by sa mali zaz�lohova�"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Po zmene ve�kosti oddielu %s bud� v�etky d�ta nen�vratne straten�"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Zvolte nov� ve�kos�"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nov� ve�kos� v MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Ktor� disk si �el�te posun��?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Ktor� sektor si �el�te posun��?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Pres�vam"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Pres�vam oddiel..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Vyberte existuj�ci RAID pre pridanie"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nov�"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Vyberte existuj�ci LVM pre pridanie"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM meno?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Tento oddiel nem��e by� pou�it� pre sp�tn� slu�ku"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Sp�tn� slu�ka"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Meno s�boru sp�tnej slu�ky: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Zadajte meno s�boru"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "S�bor je u� pou��van� inou sp�tnou slu�kou, sk�ste in� s�bor"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "S�bor existuje. Pou�i�?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Parametre pripojenia"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Rozdielne"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "zariadenie"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "�rove�"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "ve�kos�"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Bu�te opatrn�: t�to oper�cia je nebezpe�n�."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Ak� typ rozdelenia oddielov?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Prep��te, ale nem��em akceptova� vytvorenie /boot tak �aleko na disku (na "
-"valci > 1024).\n"
-")Pou��vate LILO a t�m p�dom to nebude pracova�, alebo ho nepou��vate a t�m "
-"p�dom nepotrebujete /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Oddiel, ktor� chcete prida� ako root (/) sa na disku fyzicky nach�dza a� za "
-"valcom 1024, a nem�te zadefinovan� oddiel /boot. \n"
-"Ak pl�nujete pou�i� LILO, pros�m pridajte najprv oddiel /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Nastavili ste softv�rov� RAID oddiel ako kore�ov� (/).\n"
-"�iaden zav�dza� syst�mu nedok�e zavies� syst�m bez /boot oddielu.\n"
-"Preto dbajte na pridanie /boot oddielu"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partition tabu�ka zariadenia %s sa zap��e na disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Aby sa �pravy prejavili, mus�te re�tartova� po��ta�"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Ak naform�tujete oddiel %s,v�etky predo�l� d�ta sa na �om stratia"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Form�tuje sa"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Form�tuje sa loopback s�bor %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Form�tuje sa oddiel %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Skryt� s�bory"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Prenes s�bory na nov� oddiel"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Adres�r %s u� obsahuje nejak� d�ta\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Prenos s�borov na nov� oddiel"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kop�rujem %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Odstra�ujem %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "oddiel %s sa teraz vol� %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Zariadenie:"
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Ozna�enie v DOSe: %s (asi)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Typ: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Meno: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Za�iatok: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Ve�kos�: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorov"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Od cylindra %d po cylinder %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Naform�tovan�\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nenaform�tovan�\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Pripojen�\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback s�bor(y):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Predvolen� oddiel pre �tart\n"
-"    (MS-DOS boot, nie pre lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Hladina %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ve�kos� k�sku %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-disky %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Meno loopback s�boru: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Mo�nosti s�, tento oddiel je\n"
-"ovl�daci oddiel, mali by ste\n"
-"ho nechca� samotn�.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Tento �pecialny Bootstrap\n"
-"oddiel je pre\n"
-"du�lne �tartovanie syst�mu.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Ve�kos�: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cylindrov, %s hlavi�iek, %s sektorov\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info:"
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-disky %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Typ partition tabu�ky: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na zbernici %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Mo�nosti: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Kryptovac� k��� s�borov�ho syst�mu"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Zvo�te kryptovac� k��� s�borov�ho syst�mu"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Tento kryptovac� k��� je pr�li� jednoduch� (mus� by� minim�lne %d znakov "
-"dlh�)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "kryptovacie k���e nes�hlasia"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Kryptovac� k���"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Kryptovac� k��� (znovu)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Zme�te typ"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Pros�m kliknite na m�dium"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS server"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s form�tovanie %s zlyhalo"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nedok�em form�tova� %s na typ %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck zlyhalo s exit k�dom %d alebo sign�lom %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "chyba odpojenia %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednoduch�"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Na oddiely men�ie ako 16MB nem��ete pou�i� JFS"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Na oddiely men�ie ako 32MB nem��ete pou�i� ReiserFS"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Body pripojenia musia za��na� /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Oddiel s bodom pripojenia %s u� existuje\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nem��ete pou�i� logick� zv�zok LVM pre bod pripojenia %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Tento adres�r by mal osta� na rootovskom s�borovom syst�me"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Pre tento bod pripojenia potrebujete ozajstn� s�borov� syst�m(ext2, "
-"reiserfs)\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Nem��ete pou�i� kryptovan� s�borov� syst�m pre bod pripojenia %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nedostatok miesta pre automatick� alok�ciu"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nerobi� ni�"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Chyba otv�rania %s pre z�pis: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Vyskytla sa chyba - neboli n�jden� �iadne platn� zariadenia, na ktor�ch je "
-"mo�n� vytvori� nov� s�borov� syst�my. Skontrolujte v� hardv�r pre zistenie "
-"pr��iny probl�mu."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nem�te �iadny oddiel disku!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Teraz by ste mali zvoli� slu�by, ktor� chcete sp���a� pri �tarte.\n"
-"\n"
-"\n"
-"Ak pl�nujete pou��va� tento po��ta� ako server pr�stupn� z internetu, mali "
-"by ste\n"
-"povoli� iba slu�by ktor� naozaj potrebujete. "
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Teraz m��ete zvoli�, kam si �el�te in�talova� Linux Mandrake.\n"
-"Ak je pevn� disk pr�zdny, alebo ak in� opera�n� syst�m zaber�\n"
-"v�etok pou�ite�n� priestor, treba disk rozdeli�.\n"
-"\n"
-"\n"
-"Preto�e je efekt rozdelovacieho procesu nen�vratn�, prerozdelenie\n"
-"disku m��e byt pre nesk�sen�ch u��vate�ov stresuj�ce. Tento n�stroj\n"
-"rozde�ovanie disku zjednodu�uje.\n"
-"\n"
-"\n"
-"Potrebujete minim�lne dva oddiely. Jeden pre opera�n� syst�m a jeden\n"
-"pre virtu�lnu pam� (tie� naz�van� swap)."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Ka�d� novo definovan� diskov� oddiel mus� by� naform�tovan�.\n"
-"Form�tovanie znamen� vytv�ranie s�borov�ho syst�mu.\n"
-"\n"
-"\n"
-"Teraz m��ete zvoli�, �i si �el�te form�tova� existuj�ce oddiely aby ste "
-"odstr�nili\n"
-"d�ta, ktor� sa na nich nach�dzaj�. Ak si to �el�te, zvo�te pros�m oddiely, "
-"ktor�\n"
-"si �el�te form�tova�.\n"
-"\n"
-"\n"
-"Nieje nutn� op�tovne form�tova� v�etky existuj�ce oddiely. Ur�ite mus�te\n"
-"form�tova� oddiely obsahuj�ce opera�n� syst�m (napr�klad  \"/\", \"/usr\",\n"
-"alebo \"/var\"  ). Nemus�te v�ak form�tova� oddiely obsahuj�ce d�ta, ktor�\n"
-"chcete zachova� (typicky \"/home\")\n"
-"\n"
-"\n"
-"Pri vo�be oddielov na form�tovanie bu�te opatrn�. V�etky d�ta na "
-"form�tovanom\n"
-"oddiely bud� nen�vratne straten�.\n"
-"\n"
-"\n"
-"Kliknite na \"OK\" ak ste pripraven� form�tova� vybran� oddiely. \n"
-"\n"
-"\n"
-"Kliknite na \"Zru�\" ak chcete zvoli� in� oddiely pre in�tal�ciu."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Teraz sa in�taluje v� nov� opera�n� syst�m Linux Mandrake.\n"
-"V z�vislosti na mno�stve bal��kov a r�chlosti v�ho po��ta�a\n"
-"m��e t�to oper�cia trva� od nieko�k�ch min�t a� po r�dovo hodiny.\n"
-"\n"
-"Pros�m bu�te trpezliv�."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Pred t�m, ne� budete pokra�ova�, mali by ste si pozorne pre��ta�\n"
-"licen�n� podmienky. Pokr�vaj� cel� distrib�ciu Linux Mandrake\n"
-"a ak nes�hlas�te so v�etk�mi z nich kliknite na tla�itlo \"Odmietni\".\n"
-"To okam�ite ukon�� in�tal�ciu. Pre pokra�ovanie v in�tal�cii\n"
-"stla�te tla�idlo \"Akceptuj\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Pros�m bu�te trpezliv�. T�to oper�cia m��e trva� nieko�ko min�t."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Pros�m zvo�te  \"Install\" ak nem�te nain�talovan� predo�l� verziu Mandrake "
-"Linux-u\n"
-"alebo ak chcete pou��va� viac opera�n�ch syst�mov.\n"
-"\n"
-"\n"
-"Pros�m zvo�te  \"Update\" ak si �el�te obnovi� u� nain�talovan� star�iu "
-"verziu Mandrake Linux-u.\n"
-"\n"
-"\n"
-"V z�vislosti od va�ich sk�senost� s GNU/Linux-om m��ete zvolit jednu z  "
-"nasleduj�cich �rovn� in�tal�cie\n"
-"\n"
-"* Recommended: Ak ste e�te nikdy nein�talovali GNU/Linux, zvo�te t�to "
-"mo�nos�. In�tal�cia bude\n"
-" ve�mi jednoduch� a budete musie� odpoveda� len na nieko�ko ot�zok.\n"
-"\n"
-"\n"
-"* Customized: ak ste sa u� s GNU/Linux-om stretli, m��ete si zvoli� z�kladn� "
-"pou�itie v�ho po��ta�a \n"
-" (pracovn� stanica, server, v�vojov� stanica). Budete tie� musie� odpoveda� "
-"na viac ot�zok ako pri \n"
-" Recomended �rovni in�tal�cie.\n"
-"\n"
-"\n"
-"* Expert: Ak m�te naozaj dostato�n� sk�senosti s GNU/Linux-om, m��ete zvoli� "
-"t�to triedu in�tal�cie.\n"
-" Tak ako v Customized si budete m�c� zvoli� z�kladn� pou�itie v�ho po��ta�a "
-"(pracovn� stanica, server,\n"
-" v�vojov� stanica). Budete ma� mo�nos� ovplyvni� mnoho detailov in�tal�cie "
-"ale m��e sa V�m sta�, �e \n"
-" nebudete vedie� odpoveda� na niektor� ot�zky. Preto nepou��vajte t�to "
-"�rove� in�tal�cie pokia� sa v \n"
-" GNU/Linux-e naozaj nevyzn�te."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Pros�m zvo�te spr�vny port. Napr�klad COM1 pod MS Windows sa v\n"
-"GNU/Linux naz�va ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Mus�te sa rozhodn��, kam umiestni� inform�cie potrebn� pre spustenie\n"
-"syst�mu.\n"
-"Pokia� presne neviete �o robi� zvo�te \"Prv� sektor disku (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX sa pok�si vyh�ada� PCI SCSI radi�e. Ak DrakX n�jde SCSI\n"
-"adapt�r a rozpozn� ak� ovl�da� pou�i�, bude automaticky nain�talovan�.\n"
-"\n"
-"\n"
-"Ak nem�te SCSI radi�, alebo m�te (ISA, PCI) SCSI adapt�r, ktor� DrakX\n"
-"nerozoznal. Budete musie� odpoveda� �i m�te SCSI radi�. V pr�pade, �e\n"
-"zvol�te �no, zobraz� sa zoznam ovl�da�ov z ktor�ch si budete m�c� \n"
-"vybra� vhodn� pre v� SCSI radi�.\n"
-"\n"
-"\n"
-"V pr�pade, �e budete sami vybera� vhodn� ovl�da�, DrakX v�m d� mo�nos�\n"
-"�pecifikova� jeho parametre. Taktie� budete musie� dovoli� test hardv�ru\n"
-"na funk�nos� ovl�da�a a jeho parametrov."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Taktie� mus�te naform�tova� %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Zvolili ste nasleduj�ce slu�by: %s\n"
-"\n"
-"\n"
-"Tieto slu�by sa sp���aj� implicitne. Moment�lne nemaj� �iadne zn�me "
-"bezpe�nostn�\n"
-"chyby, ale v bud�cnosti nejak� m��u by� n�jden�. V tom pr�pade mus�te prejs� "
-"na\n"
-"vy��iu verziu �o najsk�r.\n"
-"\n"
-"\n"
-"Naozaj si �el�te in�talova� tieto slu�by?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nem��em pou�i� broadcast bez NIS dom�ny"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Vlo�te disketu s FAT form�tom do mechaniky %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "T�to disketa nem� FAT format"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Pre pou�itie tohto ulo�en�ho v�beru bal��kov, na�tartujte in�tal�ciu s "
-"``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "chyba pri ��tan� zo s�boru %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Nejaky hardware vo va�om po��ta�i potrebuje ``proprietarne'' ovl�da�e.\n"
-"Inform�cie m��ete n�js� na: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Mus�te ma� kore�ov� oddiel.\n"
-"Vytvorte oddiel (alebo kliknite na existuj�cu).\n"
-"Potom zvo�te akciu ``Bod pripojenia`` a nastavte na `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Mus�te nastavi� swap oddiel"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nevytvorili ste swap oddiel\n"
-"\n"
-"Napriek tomu pokra�ova�?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Mus�te ma� FAT oddiel pripojen� na /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Pou�i vo�n� miesto"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nedostatok vo�n�ho miesta pre vytvorenie nov�ho oddielu"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Pou�i existuj�ci oddiel"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Tu nieje �iadny pou�ite�n� oddiel"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Pou�i oddiel s Windows pre loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Ktor� oddiel chcete pou�i� pre Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Zvo�te ve�kosti"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Ve�kos� kore�ov�ho oddielu v MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Ve�kos� oddielu v MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Pou�i vo�n� miesto na Windows oddiele"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Ktor�mu oddielu chcete zmeni� ve�kos�?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Po��tam hranice s�borov�ho syst�mu pre Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Meni� ve�kosti FAT nebol schopny pracova� s oddielom, \n"
-"nastala chyba: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Va� oddiel s Windows je ve�mi fragmentovan�, pros�m spustite najprv  "
-"``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"POZOR!\n"
-"\n"
-"DrakX teraz ide zmeni� ve�kos� v�ho Windows oddielu.\n"
-"Bu�te opatrn�: t�to oper�cia je nebezpe�n�. Ak ste tak e�te\n"
-"neurobili, spustite najsk�r pod Windows scandisk a defrag.\n"
-"Bolo by tie� vhodn� zaz�lohova� va�e d�ta. \n"
-"Ak viete �o rob�te, stla�te Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Ko�ko chcete necha� pre windows"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "oddiel %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Ne�spe�n� zmena ve�kosti FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nieje tu oddiel FAT, ktor�mu by sa dala zmeni� ve�kos� alebo pou�i� ho pre "
-"loopback (alebo tam nieje dostatok vo�n�ho miesta)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Vyma� cel� disk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Odstr�ni� Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "M�te viac ako jeden disk, na ktor� chcete in�talova� linux ?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "V�etky oddiely a d�ta na nich budu straten� na disku %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Vlastn� rozdelenie disku"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Pou�i� fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Teraz m��ete rozdeli� v� pevn� disk %s.\n"
-"Ke� skon��te, nezabudnite ulo�i� zmeny pomocou `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nem�te dostatok vo�n�ho miesta na oddiele s Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Nem��em n�js� miesto pre in�tal�ciu"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX sprievodca rozdelen�m disku na�iel tieto rie�enia:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ne�spe�ne rozde�ovanie: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Sp���am pr�cu so sie�ou"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Ukon�ujem pr�cu so sie�ou"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Vyskytla sa chyba a neviem ju �plne vyrie�i�.\n"
-"Pokra�ujte na vlastn� zodpovednos�."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dvojn�sobn� bod pripojenia %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Niektor� d�le�it� bal�ky neboli spr�vne nain�talovan�.\n"
-"Je mo�n�, �e s� po�koden� v� CD disk alebo mechanika.\n"
-"Skontrolujte to napr�klad pou�it�m \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Vitajte v %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nie je dostupn� �iadna floppy mechanika"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Sp���am krok %s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"V� syst�m m� nedostatok prostriedkov. Mo�no budete ma� probl�my s\n"
-"in�tal�ciou Mandrake Linux. Ak sa tak stane, sk�ste textov� in�tal�ciu. Pre "
-"jej\n"
-"spustenie stla�te `F1' po na�tartovan� z CDROMky a zadajte `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Trieda in�tal�cie"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Pros�m, zvo�te jednu z nasleduj�cich tried in�tal�cie: "
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Celkov� ve�kos� skup�n, ktor� ste ozna�ili je pribli�ne %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ak si �el�te in�talova� menej ako je dan� ��slo,\n"
-"zvo�te to�ko percent bal�kov, ko�ko uzn�te za vhodn�.\n"
-"\n"
-"Pri mal�ch percent�ch sa bud� in�talova� iba naozaj d�le�it� bal�ky\n"
-"a ak zvol�te 100%% nain�taluje sa v�etko."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Na disku m�te priestor iba pre %d%% z ozna�en�ch bal�kov.\n"
-"\n"
-"Ak si �el�te nain�talova� menej,\n"
-"zvo�te to�ko percent bal�kov, ko�ko uzn�te za vhodn�.\n"
-"Pri mal�ch percent�ch sa bud� in�talova� iba naozaj d�le�it� bal�ky\n"
-"Ak nech�te  %d%% nain�taluje sa to�ko bal�kov, ko�ko bude mo�n�."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "V �al�om kroku budete ma� mo�nos� nastavi� presnej�ie"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentu�lny po�et bal�kov pre in�tal�ciu"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "V�ber skup�n bal�kov"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Osobitn� vo�ba bal�kov"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Celkov� ve�kos�: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Chybn� bal�k"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Meno: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verzia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Ve�kos�: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "D�le�it�: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Nem��ete ozna�i� tento bal�k preto�e na jeho in�tal�ciu nie je dos� miesta."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Bud� nain�talovan� nasleduj�ce bal�ky"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Nasleduj�ce bal�ky bud� odstr�nen�"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "M��ete ozna�i�/odzna�i� tento bal�k"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Toto je jeden zo z�kladn�ch bal�kov, nem��e by� odzna�en�"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nem��ete odzna�i� tento bal�k. Je u� nain�talovan�"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Tento bal�k potrebuje nov�iu verziu\n"
-"Ste si ist�, �e ho chcete odzna�i�?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Nem��ete odzna�i� tento bal�k. Mus�te prida� nov� verziu"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Zobraz automaticky zvolen� bal��ky"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "In�tal�cia"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Nahra�/Ulo�i� na disketu"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Aktualiz�cia vo�by bal��kov"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minim�lna in�tal�cia"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Zvo�te bal�ky, ktor� chcete nain�talova�"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "In�talujem"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Odhadujem"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Zvy�n� �as "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Pros�m �akajte, pripravujem in�tal�ciu"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d bal�ky"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "In�talujem bal�k %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Akceptuj"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Odmietni"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Zme�te v� CD-ROM disk!\n"
-"\n"
-"Pros�m, vlo�te CD-ROM nazvan� \"%s\" do va�ej mechaniky a zvo�te OK.\n"
-"Ak tak� CD disk nem�te, zvo�te Zru� pre zru�enie in�tal�cie z tohoto disku."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Napriek tomu pokra�ova�?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Chyba pri zora�ovan� zoznamu bal�kov:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Po�as in�tal�cie bal�kov sa vyskytla chyba:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Vyskytla sa chyba"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Naozaj chcete ukon�i� in�tal�ciu?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "S�hlas s licenciou"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Kl�vesnica"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Pros�m, zvo�te typ va�ej kl�vesnice."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Tu je zoznam dostupn�ch kl�vesnic"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Ak� in�tala�n� triedu chcete pou�i�?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "In�tal�cia/Aktualiz�cia"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Toto je in�tal�cia alebo aktualiz�cia?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Odpor��ane"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Aktualiz�cia"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Jedine aktualiz�cia bal��kov"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Pros�m, zvo�te typ va�ej my�i."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port my�i"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Pros�m zvo�te, ktor�mu s�riov�mu portu je va�a my� pripojen�."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emul�cia tla�idiel"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emul�cia druh�ho tla�idla"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emul�cia tretieho tla�idla"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurujem PCMCIA karty..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfigurujem IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nie s� dostupn� �iadne oddiely"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Preh�ad�vam oddiely na body pripojenia"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Zvo�te body pripojenia"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nem��em pre��ta� tabu�ku rozdelenia disku, je pr�li� po�koden� :(\n"
-"M��em sa pok�si� vy�isti� po�koden� oddiely (V�ETKY �DAJE budu straten�!).\n"
-"Druhou mo�nos�ou je zak�za� DrakXu modifikova� tabu�ku rozdelenia.\n"
-"(chyba %s)\n"
-"\n"
-"Povolite str�tu oddielu?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake nedok�zal korektne na��ta� tabu�ku rozdelenia disku.\n"
-"Pokra�ujte na vlastn� riziko!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nieje dostatok miesta pre 1MB ve�k� bootstrap! In�tal�cia m��e pokra�ova�, "
-"ale pre spustenie syst�mu mus�te vytvori� oddiel pomocou DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Nena�iel som kore�ov� oddiel pre upgrade"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Kore�ov� oddiel"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Ktor� je kore�ov� oddiel va�ej in�tal�cie?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Aby sa prejavily �pravy partition tabu�ky, mus�te re�tartova�"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "V�ber oddielov pre form�tovanie"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Kontrola chybn�ch blokov?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Form�tuje sa"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Vytv�ram a form�tujem s�bor %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nedostato�ne ve�k� swap pre dokon�enie in�tal�cie, pros�m zv��i�"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "H�ad�m dostupn� bal�ky"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "H�ad�m bal�ky pre aktualiz�ciu"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "V� syst�m nem� dos� miesta pre in�tal�ciu alebo upgrade (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "�plna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Odporu�en� (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Pros�m zvo�te na��ta�, alebo ulo�i� v�ber bal��kov na disketu.\n"
-"Form�t je tak� ist� ako diskety generovan� automatickou\n"
-"in�tal�ciou."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Nahra� z diskety"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Nahr�vam z diskety"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "V�ber bal��kov"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Vlo�te do mechaniky disketu s zoznamom bal��kov"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Ulo� na disketu"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Zvolen� ve�kos� je v��ia ako dostupn� miesto"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Typ in�tal�cie"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Nebola vybrat� �iadna skupina bal��kov\n"
-"Pros�m, zvo�te minim�lnu in�tal�ciu, ktor� si �el�te"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "S X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "So z�kladnou dokument�ciou (doporu�en�!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Naozaj minim�lna in�tal�cia (bez urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ak m�te v�etky CD zo zoznamu, stla�te OK.\n"
-"Ak nem�te �iadne, stla�te Zru�.\n"
-"Ak v�m ch�baj� iba niektor�, odzna�te ich a potom stla�te OK."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ozna�en� \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Pripravujem in�tal�ciu"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"In�talujem bal�k %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Poin�tala�n� konfigur�cia"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Vlo�te �tartovaciu disketu do mechaniky %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Vlo�te Update Modules disketu do mechaniky %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Teraz m�te mo�nos� z�ska� bal�ky ur�en� na kryptovanie.\n"
-"\n"
-"Varovanie:\n"
-"\n"
-"V�aka rozdielnemu pr�stupu z�kona (v r�znych krajin�ch) k t�mto bal�kom,\n"
-"by ste sa mali dopredu uisti�, �i v�m pou��vanie tak�chto bal�kov z�kon\n"
-"vo va�ej krajine dovo�uje.\n"
-"\n"
-"V pr�pade, �e poru��te z�kony va�ej krajiny, mali by ste si by� vedom�,\n"
-"ak� trest v�m za to hroz�.\n"
-"\n"
-"Mandrakesoft (ani jeho zamestnanci, �i spolupracovn�ci) neru�� za ak�ko�vek\n"
-"�kody sp�soben� pou��van�m jeho softv�ru.\n"
-"\n"
-"\n"
-"Ak m�te �al�ie ot�zky s�visiace s t�mto textom, obr�te sa pros�m na \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Teraz m�te mo�nos� stiahnu� aktualizovan� verzie bal��kov, ktor�\n"
-"boli vydan� a� po uvo�nen� distrib�cie.\n"
-"\n"
-"Z�skate t�m bezpe�nostn� opravy a opravy ch�b. Potrebujete\n"
-"v�ak nastaven� pripojenie k internetu.\n"
-"\n"
-"�el�te si nain�talova� aktualiz�cie bal��kov ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Prip�jam sa k www str�nke Mandrake Linuxu pre stiahnutie zoznamu  zrkadiel"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Vyberte miror, z ktor�ho chcete stiahnu� bal�k"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Prip�jam sa k miroru a s�ahujem zoznam mo�n�ch bal�kov"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Ktor� je va�e �asov� p�smo?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardv�rove hodiny nastaven� na GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatick� synchroniz�cia �asu (pomocou NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Vzdialen� CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Bez tla�iarne"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "M�te e�te nejak� �al�ie?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Zhrnutie"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "My�"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "�asov� z�na"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Tla�iarne"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN karta"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Zvukov� karta"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV karta"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lok�lne s�bory"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Nastavenie root hesla"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez hesla"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Toto heslo je pr�li� jednoduch�(mus� by� minim�lne %d znakov dlh�)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentifik�cia"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Autentifik�cia LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS autentifik�cia"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS dom�na"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Vlastn� zav�dzacia disketa poskytuje mo�nos� zavies� v� syst�m Linux\n"
-"bez z�vislosti na obvyklom zav�dza�i. Hod� sa to, pokia� nechcete na va�om\n"
-"syst�me in�talova� SILO, in� opera�n� syst�m SILO odstr�ni, alebo\n"
-"SILO nepracuje spr�vne s va��m hardv�rom. Individu�lna zav�dzacia disketa\n"
-"m��e by� tie� pou�it� spolu s Mandrake Linux z�chrannou disketou, �o \n"
-"podstatne u�ah�� zotavenie sa z v�nych ch�b syst�mu.\n"
-"\n"
-"Ak si �el�te vytvori� zav�dzaciu disketu pre v� syst�m, vlo�te disketu do\n"
-"prvej mechaniky a stla�te \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Prv� floppy mechanika"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Druh� floppy mechanika"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Vynechaj"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Individu�lna zav�dzacia disketa poskytuje mo�nos� zavies� v� syst�m Linux\n"
-"bez z�vislosti na obvyklom zav�dza�i. Hod� sa to, pokia� nechcete na va�om\n"
-"syst�me in�talova� LILO (�i GRUB), in� opera�n� syst�m LILO odstr�ni, alebo\n"
-"LILO nepracuje spr�vne s va��m hardv�rom. Individu�lna zav�dzacia disketa\n"
-"m��e by� tie� pou�it� spolu s Mandrake Linux z�chrannou disketou, �o \n"
-"podstatne u�ah�� zotavenie sa z v�nych ch�b syst�mu.\n"
-"\n"
-"�el�te si vytvori� zav�dzaciu disketu pre v� syst�m?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Prep��te, nena�iel som �iadnu disketov� mechaniku"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Zvo�te floppy mechaniku v ktorej chcete vytvori� boot disketu"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Vlo�te disketu do mechaniky %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Vytv�ram bootdisk"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Pripravuje sa zav�dza�"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Chcete pou�i� aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Chyba in�tal�cie aboot.\n"
-"Sk�si� silov� in�tal�ciu s mo�nos�ou zni�enia prv�ho oddielu?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "In�talujem zav�dza�"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "In�tal�cia zav�dza�a zl�hala. Vyskytla sa nasleduj�ca chyba:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Vlo�te �ist� disketu do mechaniky %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Pripravujem auto in�tala�n� disketu"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Niektor� kroky niesu dokon�en�.\n"
-"\n"
-"Naozaj chcete teraz skon�i�?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulujeme! In�tal�cia je kompletn�.\n"
-"Vyberte zav�dzacie m�dium (disketa, CD) a sta�te enter\n"
-"pre re�tart po��ta�a.\n"
-"\n"
-"\n"
-"Inform�cie o oprav�ch tejto verzie Mandrake Linux-u m��ete n�jst na\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-" "
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Pr�prava auto in�tala�nej diskety"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automatick� in�tal�cia m��e by� plne automatizovan�\n"
-"v tom pr�pade v�ak in�tal�cia zaberie cel� pevn� disk.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatick�"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Prehra�"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Ulo�i� vo�bu bal�kov"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "In�tal�cia Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> medzi polo�kami  |  <Medzera> ozna�uje  |  <F12> �alej"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "ch�ba kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Zvo�te s�bor"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Roz��rene"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Z�kladn�"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Pros�m �akajte"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Uk� strom"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Skri strom"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Priame, alebo skupinov� triedenie"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Chybn� vo�ba, sk�ste znovu\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Va�a vo�ba? (predvolen� %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Z�znamy, ktor� mus�te vyplni�:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Va�a vo�ba? (0/1, predvolen� `%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Tla��tko `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "�el�te si klikn�� na toto tla��tko?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Va�a vo�ba? (predvolen� `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "�esk� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Nemeck�"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "�panielska"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "F�nska"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Franc�zska"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "N�rska"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polsk�"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rusk�"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "�v�dska"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK kl�vesnica"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US kl�vesnica"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Alb�nska"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Arm�nska (star�)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Arm�nska (p�sac� stroj)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Arm�nska (fonetick�)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbajd�an (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgick�"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulharsk� (fonetick�)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulharsk� (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Braz�lska"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorusk�"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "�vaj�iarska (Nemeck� rozlo�enie kl�ves)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "�vaj�iarska (Franc�zske rozlo�enie kl�ves)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "�esk� (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Nemeck� (bez m�tvych kl�ves)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "D�nska"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (N�rska)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Swedish)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Est�nska"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruz�nska (\"Rusk�\" rozlo�enie kl�ves)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruz�nska (\"Latin\" rozlo�enie kl�ves)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Gr�cka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ma�arsk�"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Chorv�tska"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraelsk�"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Izraelsk� (fonetick�)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Ir�nska"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandsk�"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Talianska"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japonsk� 106 kl�ves"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "K�rejska kl�vesnica"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinsko Americk�"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litovsk� AZERTY (star�)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litovsk� AZERTY (nov�)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litovsk� QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litovsk� \"fonetick�\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Maced�nska"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandsk�"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Po�sk� (qwerty rozlo�enie kl�ves)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Po�sk� (qwertz rozlo�enie kl�ves)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugalsk�"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadsk� (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rom�nska (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rom�nska (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rusk� (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovinsk�"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovensk� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovensk� (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Srbsk� (cyrillic)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamilsk�"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thaisk� kl�vesnica"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik kl�vesnica"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tureck� (tradi�n� \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tureck� (modern� \"Q\" model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrainsk�"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US kl�vesnica (medzin�rodn�)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamsk� \"numerick�\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Juhoslovansk� (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-#, fuzzy
-msgid "Left \"Windows\" key"
-msgstr "Prevzia� fonty z Windows"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kruhov� pripojenia %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Odstra�te najprv logick� zv�zky\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA podpora u� nieje zahrnut� v jadr�ch verzie 2.2. Pou�ite verziu 2.4"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun my�"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "�tandardn� PS2 my� s kolieskom"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 tla�idlo"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "�tandardn� my� s 2 tla�idlami"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "V�eobecn�"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Koliesko"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "s�riov�"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "�tandardn� trojtla��tkov�"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (s�riov�, star� typ C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "My� na zbernici"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 tla�idl�"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 tla�idl�"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ni�"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "�iadna my�"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Pros�m otestujte my�."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Pre aktiv�ciu my�i,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "POHNITE KOLIESKOM!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Dokon�i�"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "�al�� ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Predch�dzaj�ce"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Je to spr�vne?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Pripojenie k internetu"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Najpou�ivanej�ie pripojenie s adsl je pppoe.\n"
-"Av�ak existuj� pripojenia ktor� pou��vaju pptp alebo dhcp.\n"
-"Ak neviete �o pou�i�, tak zvo�te 'pou�i pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "pou�i� dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pou�i pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pou�i pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Ktor� dhcp klient chcete pou�i�?\n"
-"�tandardn� je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Vo va�om syst�me nebol n�jden� sie�ovy ethernet adapt�r.\n"
-"Nem��em nastavi� po�adovan� typ pripojenia."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Zvo�te sie�ove rozhranie"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Pros�m zvo�te si ktor� sie�ov� zariadenie budete pou��va� na pripojenie k "
-"internetu"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nena�iel som sie�ov� kartu"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfigurujem sie�"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Pros�m zadajte meno v�ho po��ta�a ak ho viete.\n"
-"Niektor� DHCP servre ho vy�aduj� pre svoju funk�nos�.\n"
-"Meno v�ho po��ta�a by malo byt plne kvalifikovan� host name,\n"
-"ako napr�klad ``hq.alert.sk''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "N�zov po��ta�a"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Sprievodca konfigur�ciou siete"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Extern� ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Intern� ISDN karta"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Ak� typ ISDN pripojenia m�te?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Ktor� typ nastavenia ISDN uprednotn�te?\n"
-"\n"
-"* Star� typ pou��va isdn4net. Obsahuje siln� n�stroje, ale\n"
-"  �a�ko sa nastavuje.\n"
-"\n"
-"* Nov� typ je jednoduch�ie pochopite�n�, ale obsahuje menej\n"
-"  n�strojov.\n"
-"\n"
-"Doporu�ujeme pou�i� nov� typ nastavenia ISDN.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nov� konfigur�cia (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Star� konfigur�cia (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Konfigur�cia ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Zvo�te si poskytovate�a.\n"
-"Ak nieje v zozname, zvo�te Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Eur�psky protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Eur�psky protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol pre zvy�ok sveta"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol pre zvy�ok sveta \n"
-" bez D-Channel (prenajat� linky)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Ak� typ protokolu chcete pou��va� ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Ak� typ karty m�te?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Neviem"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ak m�te ISA kartu, tak hodnoty na �al�ej obrazovke by mali by� spr�vne.\n"
-"\n"
-"Ak m�te PCMCIA kartu, mus�te vedie� irq a io adresu tejto karty.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Preru�"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Pokra�ova�"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Ktor� je va�a ISDN karta ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Na�iel som PCI ISDN kartu, ale nepozn�m tento typ. Pros�m zvo�te si jednu z "
-"PCI kariet na �al�ej obrazovke."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Nebola n�jdena ISDN karta. Pros�m zvo�te si jednu zo zobrazen�ch."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Pros�m zvo�te na ktor� s�riov� port je pripojen� v� modem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Vo�by dialupu"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Meno pripojenia"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telef�nne ��slo"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Prihlasovacie ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Zalo�en� na skriptoch"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Zalo�en� na termin�ly"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Meno dom�ny"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Prv� DNS server (nepovinn�)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Druh� DNS server (nepovinn�)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"M��ete va�e pripojenie prekonfigurova� alebo sa odpoji�."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"M��ete prekonfigurova� va�e pripojenie."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Moment�lne ste pripojen� k internetu."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"M��ete prekonfigurova� va�e pripojenie, alebo sa pripojit k internetu."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Moment�lne nieste pripojen� k internetu."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Pripojenie"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Odpojenie"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Nastavi� pripojenie"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Pripojenie a konfigur�cia internetu"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Teraz nastav�me Va�e pripojenie %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Teraz nastav�me pripojenie %s.\n"
-"\n"
-"Stla�te OK pre pokra�ovanie."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Konfigur�cia siete"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Preto�e rob�te in�tal�ciu cez sie�, va�a sie� je u� nasaven�. Stla�te OK pre "
-"zachovanie\n"
-"nastavenia, alebo Cancel pre op�tovn� nastavenie pripojenia na internet a "
-"sie�.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"V�tajte v sprievodcovi nastavenia siete\n"
-"\n"
-"Chcete nastavi� va�e pripojenie k sieti/internetu.\n"
-"Ak nechcete pou�i� automatick� detekciu od�krtnite pol��ko.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Zvo�te profil na konfigur�ciu"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Pou�i� auto-detekciu"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Zis�ujem zariadenia..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Norm�lne mod�move pripojenie"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detekovan� na porte %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN pripojenie"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "n�jdene %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL pripojenie"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detekovan� na rozhran� %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Pripojenie k�blom"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "detekovan� pripojenie k�blom"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Pripojenie LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "n�jden� ethernet karta(y)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Vyberte pripojenie, ktor� chcete nastavi�"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Nastavili ste nieko�ko mo�nost� pripojenia k internetu.\n"
-"Zvo�te jednu, ktor� chcete pou��va�.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Pripojenie k internetu"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Chcete sa pripoji� hne� pri �tarte?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Konfigur�cia siete"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Sie� potrebuje re�tart."
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Nastal probl�m pri re�tartovan� sie�e: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gratulujeme. Nastavenie siete a pripojenia k internetu je dokon�en�\n"
-"Nastavenie bude teraz aplikovan� na v� syst�m.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Po zmene doporu�ujeme re�tartovat X windows, aby ste\n"
-"predi�li probl�mom pri zmene mena hostu."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Po�as konfigur�cie sa vyskytli probl�my.\n"
-"Vysk��ajte Va�e pripojenie s n�strojom net_monitor, alebo mcc. Ak pripojenie "
-"nepracuje, mali by ste op�tovne spusti� konfigur�ciu"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"Varovanie: Toto zariadenie u� bolo  nastaven� na pr�stup k internetu.\n"
-"Jednoducho nechajte p�vodn� nastavenie.\n"
-"Modifik�cia parametrov m��e zmeni� nastavenie."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Zadajte IP konfigur�ciu tohoto po��ta�a.\n"
-"Ka�d� z�znam by mal by� zadan� ako IP adresa v dekadickom tvare\n"
-"oddelenom bodkami (napr. 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigur�cia sie�ov�ho zariadenia %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (ovlada� %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Maska siete"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatick� IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa mus� by� vo form�te 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Pros�m zadajte meno v�ho po��ta�a.\n"
-"Meno v�ho po��ta�a by malo byt plne kvalifikovan� host name,\n"
-"ako napr�klad ``hq.alert.sk''.\n"
-"Tie� m��ete zada� IP adresu br�ny ak ju viete"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (napr. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Zariadenie smeruj�ce k br�ne"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Nastavenie proxy"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy m� by� http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy m� by� ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Konfigur�cia internetu"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Chcete sa sk�si� pripoji� teraz k internetu?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testovanie pripojenia..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Syst�m je teraz pripojen� k internetu."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Z bezpe�nostn�ch d�vodov bude teraz odpojen�."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Syst�m prevdepodobne nieje pripojen� k internetu.\n"
-"Sk�ste prekonfigurova� pripojenie."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konfigur�cia pripojenia"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Pros�m vypl�te alebo za�krtnite pol��ka"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ karty"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "DMA karty"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO karty"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 karty"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 karty"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Va�e osobn� telef�nne ��slo"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Meno poskytovate�a (napr. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telef�nne ��slo poskytovate�a"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 poskytovate�a (volite�n�)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 poskytovate�a (volite�n�)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Vyberte si va�u krajinu"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "M�d vyt��ania"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "R�chlos� pripojenia"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Timeout pripojenia (v sekund�ch)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Meno ��tu (u�ivate�sk� meno)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Heslo ��tu"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "nepodarilo sa pripoji�: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Na tejto platforme njeje podporovan� roz��ren� oddiel"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"V tabu�ke rozdelenia disku sa nach�dza z�znam o vo�nom priestore,\n"
-"ktor� nedok�em vyu�i�. Jedin� rie�enie je presun�� prim�rny oddiel tak,\n"
-"aby sa vo�n� miesto nach�dzalo za n�m a bolo pou�ite�n� pre roz��ren�\n"
-"oddiel."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Obnovenie zo s�boru %s zlyhalo: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Chybn� z�lohovac� s�bor"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "chyba pri z�pise do s�boru %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Na va�om disku sa deje nie�o nedobr�.\n"
-"Zlyhal test integrity d�t. Ak�ko�vek z�pis d�t mo�e skon�i�\n"
-"ne�spechom a stratou d�t."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "mus� ma�"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "d�le�it�"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "ve�mi pekn�"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "pekn�"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "mo�no"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Tla�, neukladaj do fronty."
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "USB"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lok�lna tla�iare�"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Vzdialen� tla�iare�"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Tla�iare� na vzdialenom CUPS serveri"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Tla�iare� na vzdialenom lpd serveri"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Sie�ov� tla�iare� (TCP/Soket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Tla�iare� na vzdialenom SMB/Windows 95/98/NT serveri"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Tla�iare� na vzdialenom NetWare serveri"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Vlo�te URI zariadenia tla�iarne"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Presmeruj v�stup do pr�kazu"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Nezn�my model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lok�lne tla�iarne"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Vzdialen� tla�iarne"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " na paralelnom porte \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB tla�iare� \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", multifunk�n� zariadenie na paralelnom porte \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", multifunk�n� zariadenie na USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multifunk�n� zariadenie HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", multifunk�n� zariadenie "
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", tla� na %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "na LPD serveri \"%s\", tla�iare� \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "na Windows serveri \"%s\", zlo�ka \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "na Novell serveri \"%s\", tla�iare� \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", pou�it�m pr�kazu %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Z�kladn� tla�iare� (bez ovl�da�a)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(nal %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(na tomto stroji)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na CUPS server \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Predvo�ba)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Zvo�te pripojenie tla�iarne"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Ako je tla�iare� pripojen�?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Tla�iarne na vzdialenom CUPS serveri nemus�te konfigurova� lok�lne; "
-"tla�iarne bud� rozpoznan� automaticky."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Konfigur�cia"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Vzdialen� CUPS server"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa vyzer� napr�klad takto: 192.168.1.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "�islo portu m� by� cel� kladn� ��slo!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP CUPS servera"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatick� nastavenie CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Zis�ujem zariadenia..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Test portov"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Pridaj nov� tla�iare�"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lok�lna tla�iare�"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Automatick� detekcia tla�iarn�"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatick� detekcia tla�iarn�"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Pou�i� auto-detekciu"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Vybra� u��vate�ov manu�lne"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "N�jden� %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Tla�iare� na paralelnom porte \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB tla�iare� \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Mus�te vlo�i� zariadenie alebo meno s�boru!"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Nebola n�jden� lok�lna tla�iare�!"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Pros�m, zvo�te, na ktor� port je pripojen� v�a tla�iare�."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Mus�te vlo�i� zariadenie tla�iarne"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Ru�n� nastavenie"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "In�talujem bal��ek HPOJ ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Kontrolujem zariadenia a konfigurujem HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "In�talujem bal��ek SANE ..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Vyh�ad�vam na multi-funk�nom HP zariaden�"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Nastavujem rozhranie tla�iarne pre pr�stup z CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Na��tavam datab�zu tla�iarn� ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Vo�by vzdialenej lpd tla�iarne"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Pre pou�itie vzdialenej lpd tla�iarne je potrebn� zada� n�zov tla�ov�ho "
-"servera a n�zov tla�iarne na tomto serveri."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "N�zov vzdialen�ho po��ta�a"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Meno vzdialenej tla�iarne"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Ch�ba n�zov vzdialen�ho po��ta�a"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Ch�ba n�zov vzdialenej tla�iarne!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Vo�by tla�iarne SMB/Windows 9x/NT"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Pre tla� na SMB tla�iare� je potrebn� zada� n�zov SMB servera (neb�va v�dy\n"
-"zhodn� s TCP/IP n�zvom po��ta�a) a pr�padne IP adresu tla�ov�ho servera, "
-"ako\n"
-"aj n�zov zdie�an�ho zariadenia pre tla�iare� a vhodn� meno pou��vate�a,\n"
-"heslo a pracovn� skupinu."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "N�zov SMB servra"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP adresa SMB servra"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "N�zov zdie�an�ho zariadenia"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Pracovn� skupina"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Mus�te zada� meno, alebo IP adresu servera!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Ch�ba meno samba zlo�ky!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Vo�by tla�iarne pre NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Pre tla� na NetWare tla�iare� je potrebn� zada� n�zov NetWare tla�ov�ho\n"
-"servera (neb�va v�dy zhodn� s TCP/IP n�zvom po��ta�a), ako aj n�zov fronty\n"
-"tla�iarne, ku ktorej chcete pristupova� a vhodn� meno pou��vate�a s heslom."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Tla�ov� server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "N�zov tla�ovej fronty"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Ch�ba meno NCP servera!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Ch�ba meno NCP fronty!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Soket nastavenia tla�iarne"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Pre tla� na TCP, alebo socket tla�iare� mus�te zada� meno hostite�a "
-"tla�iarne a pr�padne ��slo portu. Na HP JetDirect serveroch je ��slo portu "
-"v��inou 9100, na in�ch serveroch to m��e by� odli�n�. Pozrite si manu�l."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Hostite�sk� meno tla�iarne"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Ch�ba hostite�sk� meno tla�iarne"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI tla�iarne"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Pre pr�stup k tla�iarni zadajte jej URI. URI mus� sp��a� CUPS alebo Foomatic "
-"�pecifik�cie."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Mus�te zada� spr�vne URI!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Ka�d� tla�iare� potrebuje meno (napr�klad \"print\"). Polo�ky Popis a Poloha "
-"nie je potrebn� vypl�ova�. S� to iba koment�re pre u��vate�ov."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Meno tla�iarne"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Popis"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Umiestnenie"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Pripravujem datab�zu tla�iarn� ..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Meno vzdialenej tla�iarne"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Je to spr�vne?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Vybra� u��vate�ov manu�lne"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "V�ber modelu tla�iarne"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Ak� model tla�iarne m�te?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Nastavenie OKI winprinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Nastavenie Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Z�kladn� nastavenia tla�iarne\n"
-"\n"
-"Uistite sa, �e ve�kos� papiera, typ atramentu, tla�ov� m�d (ak existuje) a "
-"tie� hardv�rov� nastavenie laserov�ch tla�iarn� (pam�, duplex, ...) s� "
-"nastaven� spr�vne. Pr�li� vysok� kvalita, �i rozl��enie tla�e sp�sobuje "
-"spomalenie."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Parameter %s mus� by� cel� ��slo!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Parameter %s mus� by� ��slo!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Parameter %s je mimo rozsahu!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"�el�te si nastavi� t�to tla�iate� (\"%s\")\n"
-"ako predvolen�?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testovacie str�nky"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Pros�m zvo�te testovacie str�nky, ktor� chcete vytla�i�\n"
-"Tla� testovacej st�nky foto kvality m��e trva� tro�ku dlh�ie a na laserovej "
-"tla�iarni s nedostatkom pam�te sa nemus� vytla�i� v�bec. Vo ve�ine "
-"pr�padoch posta�uje vysk��a� �tandartn� testovaciu str�nku."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "�iadne testovacie str�nky"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Tla�"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "�tandardn� testovacie str�nky"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternat�vna testovacia str�nka (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternat�vna testovacia str�nka (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Fotografick� testovacia str�nka"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Bez tla�e testovac�ch str�nok"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Prebieha tla� testovacej str�nky..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testovacia str�nka bola zaslan� tla�iarni.\n"
-"K�m za�ne tla�iare� tla�i�, m��e to chv��ku trva�.\n"
-"Stav tla�e:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testovacia str�nka bola zaslan� tla�iarni.\n"
-"K�m za�ne tla�iare� tla�i�, m��e to chv��ku trva�.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Pracuje spr�vne?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Z�kladn� tla�iare�"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Zatvori�"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Tla�/Skenovanie na \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Tla��m na tla�iare� \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Zobraz zoznam parametrov"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Na��tavam d�ta tla�iarne ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Prenes nastavenie tla�iarne"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS nepodporuje tla�iarne na Novell serveroch, alebo tla�iarne, ktor� "
-"posielaj� d�ta vo free-formed command.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podporuje iba lok�lne tla�iarne, vzdialen� LPD a Socket/TCP tla�iarne.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD a LPRng nepodporuj� IPP tla�iarne.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Ozna�te tla�iare� ktor� si �el�te prenies� a stla�te \n"
-"\"Prenos\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Nepren�aj tla�iarne"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Prenos"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Tla�iare� s menom \"%s\" u� pod %s existuje.\n"
-"Stla�te \"Prenos\" na prep�sanie.\n"
-"M��ete tie� nap�sa� nov� meno alebo presko�i�\n"
-"t�to tla�iare�."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Meno tla�iarne m��e obsahova� iba p�smen�, ��sla a pod�iarkovn�k"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Tla�iare� \"%s\" u� existuje.\n"
-"�el�te si prep�sa� nastavenie ?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nov� meno tla�iarne"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Pren�am %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Obnova d�t tla�iarne ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Nastavenie vzdialenej tla�iarne"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Sp���am sie�..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Teraz nastavi� pripojenie siete"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Sie�ov� pripojenie nieje nastaven�"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Pokra�uj bez nastavenia siete."
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Re�tartujem tla�ov� syst�m ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "vysok�"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoidn�"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Sp���a� tla�ov� syst�m pri spusten� syst�mu"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Kontrolujem in�talovan� softv�r..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Odstra�ujem PLRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Odstra�ujem LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Zvo�te tla�ov� frontu"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Ak� typ tla�ov�ho syst�mu chcete pou��va�?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurujem tla�iare� \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "In�talujem bal��ky"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Vo�by tla�iarne"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Pripravujem PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Konfigurujem tla�iare� \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "�el�te si nastavi� tla�iare�?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Tla�ov� syst�m:"
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Moment�lne s� nastaven� tieto tla�iarne. Spravte dvojklik na meno tla�iarne "
-"ak si �el�te zmenit jej nastavenia, alebo prezrie� inform�cie."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Moment�lne s� nastaven� tieto tla�iarne. Spravte dvojklik na meno tla�iarne "
-"ak si �el�te zmenit jej nastavenia, alebo prezrie� inform�cie."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Nastavenie tla�ov�ho syst�mu"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Norm�lny m�d"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "�el�te si nastavi� in� tla�iare� ?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Zmena nastavenia tla�iarne"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Tla�iare� %s\n"
-"�o si �el�te zmeni� na tejto tla�iarni?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Urob to!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Typ pripojenia tla�iarne"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Meno, popis a poloha tla�iarne"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "V�robca tla�iarne, model, ovl�da�"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "V�robca tla�iarne, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Nastavi� tla�iaren ako predvolen�"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Tla� testovac�ch str�nok"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Viem, ako pou��va� t�to tla�iare�"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Odstr�ni� tla�iare�"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Odstra�ujem star� tla�iare� \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Predvolen� tla�iare�"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Tla�iare� \"%s\" je teraz nastaven� ako predvolen�."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Naozaj chcete odstr�ni� tla�iate� \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Odstra�ujem tla�iare� \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Nastavenie proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Vitajte v n�stroji na nastavenie proxy servera.\n"
-"\n"
-"Teraz budete m�c� nastavit pou��vanie FTP a\n"
-"HTTP proxy serverov a pr�stupov� hesl�.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Pros�m vypl�e inform�cie pre HTTP proxy\n"
-"Nechajte pr�zdne ak nechcete HTTP proxy\n"
-"pou��va�. "
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL ma za��na� 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Port m� by� v ��selnom tvare"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Pros�m vypl�e inform�cie pre FTP proxy\n"
-"Nechajte pr�zdne ak nechcete FTP proxy\n"
-"pou��va�. "
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL ma za��na� 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Pros�m vlo�te prihlasovacie meno a heslo pre proxy.\n"
-"Nechajte pr�zdne ak heslo nepotrebujete. "
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "heslo"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "heslo e�te raz"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Hesla nes�hlasia. Sk�ste znova!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nem��em prida� oddiel do _naform�tovan�ho_ RAID po�a md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nem��em zap�sa� s�bor %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid zlyhal"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid zlyhal (mo�no nie s� nain�talovan� raidtools)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nie je dos� oddielov pre RAID �rovne %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Spustenie ALSA (Advanced Linux Sound Architecture) zvukov�ho syst�mu"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, periodick� pl�nova� pr�kazov."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd sa pou��va pre monitorovanie (a z�pis pomocou syslogu) stavu bat�ri�.\n"
-"M��ete ho tie� pou�i� na vypnutie po��ta�a ke� sa baterky takmer min�."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr "Sp���a pr�kazy nastaven� cez pr�kaz at v stanovenom �ase."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je �tandardn� UNIXov� program, ktor� sp���a pr�kazy napl�novan�\n"
-"u��vate�om. vixie cron prid�va viac mo�nost� konfigur�cie."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM prid� podporu my�i textovo orientovan�m aplik�ci�m ako napr�klad\n"
-"Midnight Commander. Takisto umo�n� v textov�ch konzol�ch kop�rovanie\n"
-"pomocou my�i a podporu pop-up menu."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake vyh�ad�va nov� harv�r a nastavuje parametre\n"
-"nov�ho alebo zmenen�ho hardv�ru."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache je WWW server. Je pou��van� na poskytovanie HTML str�nok a CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver d�mon (v��inou naz�van� inetd) poskytuje mnoho\n"
-"slu�ieb s�visiacich s internetom. Je zodpovedn� za sp���anie slu�ieb\n"
-"ako telnet, ftp, rsh, rlogin a in�. Vypnut�m inetd vypnete v�etky\n"
-"slu�by, za ktor� je zodpovedn�."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Spust� filtrovanie paketov pre Linux kernel verzie 2.2 na \n"
-"ochranu v�ho po��ta�a pred �tokmi zo siete."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Tento bal�k nahr� do pam�ti vybran� kl�vesnicov� mapu z nastavenia v\n"
-"/etc/sysconfig/keyboard. Nastavenie sa d� meni� napr�klad pomocou\n"
-"konfigura�n�ho n�stroja kbdconfig."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatick� obnova hlavi�iek jadra v /boot\n"
-"pre /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatick� detekcia a konfigur�cia hardv�ru pri �tarte."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf niekedy nastav� vykonanie r�znych �loh po�as\n"
-"zav�dzania syst�mu pre udr�anie konfigur�cie."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je tla�ov� d�mon, ktor� je po�adovan� pre spr�vnu pr�cu n�stroja lpr."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr "Linux Virtual Server sa pou��va na vysoko v�konn� a HA rie�enia."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je dom�nov� menn� server (DNS) pou��van� na preklad z mena "
-"po��ta�a na IP adresu."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Prip�ja a odp�ja v�etky NFS, SMB (Windows) a NCP (NetWare)\n"
-"body pripojenia."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivuje/Deaktivuje v�etky sie�ov� zariadenia konfigurovan� pre spustenie\n"
-"po zaveden� syst�mu."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je zn�my protokol, ur�en� na zdielanie s�borov cez TCP/IP siete.\n"
-"T�to slu�ba dovol� NFS servru exportova� adres�re predvolen� v s�bore\n"
-"/etc/exports"
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je zn�my protokol, ur�en� na zdielanie s�borov cez TCP/IP siete.\n"
-"T�to slu�ba prid� NFS servru funkciu lockovania s�borov."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automaticky zapne num-lock pod konzolou a XFree pocas\n"
-"�tartu syst�mu."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podpora pre OKI 4w a kompatibiln� win tla�iarne."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Podpora PCMCIA je v��inou pou��van� na spr�stupnenie sie�ovej karty,\n"
-"alebo modemu v notebookoch."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmaper spravuje RPC pripojenia, ktor� s� pou��van� protokolmi ako\n"
-"NFS a NIS. Portmap server mus� by� spusten� na po��ta�och, ktor� s� \n"
-"servrami pre protokoly pou��vaj�ce RPC mechanizmus."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix je Mail Transport Agent, �i�e program, ktor� pren�a e-maily z "
-"po��ta�a na po��ta�."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Uklad� a obnovuje system entropy pool pre vy��iu kvalitu gener�tora\n"
-"n�hodn�ch ��sel."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Prirad� z�kladn� zariadenie k blokov�mu (ako napr�klad oddiely\n"
-"pevn�ho disku) pre pou�itie v aplik�ci�ch ako Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed d�mon umo��uje automatick� �pravu smerovac�ch IP tabuliek\n"
-"cez RIP protokol. RIP je �astej�ie pou��van� na mal�ch sietiach. Pre\n"
-"komplexnej�ie siete je potrebn� komplexn� smerovac� protokol."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Rstat protokol umo��uje u��vate�om z�skava� cez sie�\n"
-"inform�cie o za�a�en� ak�hoko�vek po��ta�a na sieti."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Rusers protokol umo��uje zisti� u��vate�om cez sie�, kto je\n"
-"prihl�sen� na odpovedaj�cich po��ta�och."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Rwho protokol za�le vzdialen�m u��vate�om zoznam v�etk�ch u��vate�ov\n"
-"prihl�sen� na syst�me, na ktorom je spusten� rwho d�mon (podobne ako finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Spusti� zvukov� syst�m na Va�om po��ta�i"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je mo�nos�, ktor� vyu��va mnoho d�monov na ukladanie spr�v\n"
-"do r�znych syst�mov�ch log s�borov. Je dobr�, ke� je syslog v�dy spusten�."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Nahratie ovl�da�ov pre va�e usb zariadenia."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Sp���a X Font Server (je potrebn� pre spustenie XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Zvo�te si slu�by, ktor� bud� spusten� automaticky po �tarte syst�mu"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Tla��m"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Zdielanie s�borov"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Syst�m"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Vzdialen� spr�va"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Datab�zov� server"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Slu�by: %d aktivovan�  %d registrovan�"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Slu�by"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "be��"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "stopnut�"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Slu�by a d�moni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"�iadne roz�iruj�ce inform�cie\n"
-"o tejto slu�be, prep��te."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Pri �tarte"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "�tart"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Protokol pre zvy�ok sveta"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Pr�stup k internetu"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multim�dia - Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "V�voj�rska"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Kontroln� centrum"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Sie�ove rozhranie"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "N�zov SMB servra"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Hry"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Expert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-#, fuzzy
-msgid "MandrakeConsulting"
-msgstr "Popis Mandrake N�strojov"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "In�talujem bal��ky"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nedok�em pre��ta� tabu�ku rozdelenia disku, je pr�li� po�koden�\n"
-"Sk�sim odstr�ni� chybn� oddiely"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Chyba!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Nem��em n�jst potrebn� image file `%s'."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Teraz m��ete nastavi� Autoin�tala�n� disketu. T�to mo�nos� je �iasto�ne "
-"nebezpe�n� a preto ju pou��vajte opatrne\n"
-"\n"
-"Budete m�c� zopakova� in�tal�ciu, ktor� ste spravili na tento po��ta�, s "
-"neko�k�mi interakt�vnymi krokmi (aby ste mohli zmeni� ich hodnoty)\n"
-"\n"
-"Pre maxim�lnu bezpe�nos�, rozdelenie disku a form�tovanie sa nikdy nebude "
-"robi� automaticky.\n"
-"\n"
-"�el�te si pokra�ova�?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Automatick� kroky konfigur�cie"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Pros�m pre ka�d� krok zvo�te �i sa m� zopakova� ako pri va�ej in�tal�cii "
-"alebo znovu nastavi�"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Vitajte.\n"
-"\n"
-"Parametre automatickej in�tal�cie s� dosiahnute�n� na li�te v�avo"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratulujeme!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa bola �spe�ne vytvoren�.\n"
-"Teraz m��ete zopakova� in�tal�ciu."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Automatick� in�tal�cia"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Pridaj polo�ku"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Odstr�� posledn� polo�ku"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup report \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup D�mon report\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup detaily reportu\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "celkov� postup"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Z�loha syst�mov�ch s�borov..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Z�loha na pevn� disk. S�bory..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Z�lohova� u��vate�sk� s�bory..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Stav z�lohy na pevn� disk..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Z�lohova� in� s�bory..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"Zoznam s�borov odoslan�ch cez FTP : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Chzba FTP pripojenia: Nebolo mo�n� odosla� z�lohovacie s�bory cez FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Chzba po�as odosielania e-mailu. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "V�ber s�borov"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Zvo�te s�bory a adres�re a kliknite na 'Pridaj'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Zvo�te pros�m v�etky volby, ktor� potrebujete.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Tieto nastavenia m��u z�lohova� a obnovova� v�etky s�bory v adres�ri /etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Z�loha syst�mov�ch s�borov. (adres�r /etc )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Pou�i pr�rastkov� z�lohovanie (bez prepisovania star�ch z�loh)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Nezahrnova� kritick� s�bory (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"S t�mto nastaven�m budete schopn� obnovi� ktor�ko�vek\n"
-" verziu v�ho /etc adres�ra."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Pros�m, zadajte v�etk�ch u��vate�ov, ktor�ch chcete z�lohova�."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Nezahrnova� vyrovn�vaciu pam� prehliada�a"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Pou�i pr�rastkov� z�lohovanie (bez prepisovania star�ch z�loh)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Odstr�� zvolen�"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr " Windows (FAT32) "
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr " U��vatelia"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Pre z�lohovanie pou�i� FTP"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Pros�m vlo�te meno hostu alebo IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Pros�m zadajte adres�r, kam sa\n"
-" bud� uklada� z�lohy na tomto hoste."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Pros�m vlo�te v� login"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Pros�m vlo�te va�e heslo"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Zapam�tajte si toto heslo"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr " FTP spojenie"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Bezpe�n� pripojenie"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Pre z�lohovanie pou�i� CD/DVDROM"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Pros�m, zvo�te ve�kos� CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Pros�m skontrolujte, �i pou��vate CDRW m�dium"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Pros�m za�krtnite, aks i �el�te CDRW m�dium najsk�r vymaza�"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Ak si �el�te spustite�n� CD,\n"
-" vyberte t�to vo�bu."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Pros�m, zadajte meno zariadenia CD Zapisova�ky\n"
-" napr. 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Pre z�lohovanie pou�i� p�sku"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Pros�m, zadajte meno z�lohovacieho zariadenia"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Pros�m, zadajte maxim�lnu ve�kos�\n"
-" pre Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Pros�m, zadajte adres�r:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Pre z�lohovanie pou�i� quotu."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Sie�"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM "
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Pevn� disk / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "ka�d� hodinu"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "denne"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "t��denne"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "mesa�ne"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Pou�i d�mnona"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Pros�m, zvo�te �asov� interval\n"
-"medzi jednotliv�mi z�lohami"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Pros�m, z�lohovacie \n"
-"m�dium."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Pou�itie pevn�ho disku s d�monom"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Pou�itie FTP s d�monom"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Pros�m skontrolujte �i je cron d�mon s��as�ou spus�en�ch slu�ieb."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Odosla� e-mailov� spr�vu po ka�dej z�lohe:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "�o"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Kde"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Kedy"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Viac mo�nost�"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup nastavenia"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Pros�m zvo�te kam chcete z�lohova�"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "na pevn� disk"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "cez sie�"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Pros�m zvo�te �o chcete z�lohova�"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Z�lohovac� syst�m"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Z�loha U��vate�ov"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Vybra� u��vate�ov manu�lne"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Zdroje z�lohy: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Syst�mov� s�bory:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- S�bory pou��vate�ov:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Ostatn� s�bory:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Ulo�i� na pevn� disk na cestu : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Ulo�i� na FTP na host : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t Meno u��vate�a: %s\n"
-"\t\t na cestu: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Parametre:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tNezah�na� syst�mov� s�bory\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tZ�lohovanie pou��va tar a bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tZ�lohovanie pou��va tar a gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- D�mon (%s) zah��a :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Pevn� disk.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Sie� cez FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Sie� cez SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "E�te nenastaven�, pros�m pou�ite Pomocn�ka alebo Roz��ren�.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Zoznam d�t pre obnovu:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Zoznam poru�en�ch d�t:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Pros�m odzna�te alebo odstr��te to nabud�ce."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "S�bory z�lohy boli poru�en�"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          V�etky Vami vybran� d�ta boli         "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          �spe�ne obnoven� na %s  "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Obnovi� nastavenie"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK pre obnovu ostatn�ch s�borov."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Zoznam u��vate�ov prew obnovu (je d�le�it� iba posledn� z�loha)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Najsk�r z�lohuj syst�mov� s�bory:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "pros�m, zvo�te d�ta, ktor� chcete obnovi�"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Pre z�lohovanie pou�i� pevn� disk"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Obnova z pevn�ho disku"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Pros�m, zadajte, kde s� ulo�en� z�lohy"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Vyberte in� m�dium pre obnovu"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "In� m�dium"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Obnovi� syst�m"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Obnov U��vate�ov"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Obnov ostatn�"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "vyberte cestu pre obnovu (okrem /)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Pred obnovou urobi� nov� z�lohu (iba pre pr�rastkov� z�lohovanie)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Pred obnovou odstr�� u��vate�sk� adres�re."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Obnov v�etky z�lohy"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Vlastn� obnova"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Pomoc"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Predch�dzaj�ce"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Ulo�"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Vytvor z�lohu"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Obnova"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "�al��"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Sk�r ne� sa pok�site obnovi�, vytvorte z�lohu..\n"
-"  alebo skontrolujte, �i je zadan� cesta spr�vna."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Chyba pri odosielan� po�ty\n"
-"  V� report nebol odoslan�\n"
-"  Pros�m nastavte sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Zoznam bal��kov pre in�tal�ciu"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Po�as posielania s�boru cez FTP sa vyskytla chyba.\n"
-" Pros�m skontrolujte spr�vnos� FTP nastavenia."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Pros�m, skontrolujte d�ta ktor� chcete obnovi�..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Pros�m, zvo�te m�dium pre z�lohovanie..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Pros�m, zvo�te m�dium pre z�lohovanie..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Nebol n�jden� konfigura�n� s�bor.\n"
-"Pros�m vyberte Pomocn�k, alebo Roz��ren�."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Vo v�voji ... pros�m vydr�te."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Z�lohuj syst�mov� s�bory"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Z�lohuj u��vate�sk� s�bory"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Z�lohuj in� s�bory"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Celkov� priebeh"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "s�bory odosielan� cez FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Odosielam s�bory..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Zoznam d�t, ktor� bud� na CDROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Pros�m, zadajte r�chlos� va�ej CD mechaniky"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Zadajte pros�m meno zariadenia zapisovacej CD mechaniky (napr. 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Zvo�te, ak si �el�te ma� in�tala�n� CD spustite�n�."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Z�lohuj pod�a konfigura�n�ho s�bora"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Zobraz nastavenie z�lohovania."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Pomocn�k nastavenia"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Pokro�il� konfigur�cia"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Z�lohuj"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft   DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "In�tal�cia %s zlyhala. Vyskytla sa nasleduj�ca chyba:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Hlada� nain�talovan� fonty"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Odzna�i� nain�talovan� fonty"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "zpracova� v�etky fonty"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "nena�iel som �iadne fonty"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "hotovo"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "Na pripojen�ch oddieloch nieje mo�n� n�js� fonty"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Znovu vybra� spr�vne fonty"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "nem��em n�js� �iaden font.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Vyh�ad�vam fonty v zozname nain�talovan�ch"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "K�pia fontu"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "In�tal�cia True Type fontov"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "Pros�m �akajte po�as tmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "In�tal�cia True Type fontov hotov�."
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konverzia fontov"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "vytv�ram type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Odkazy na Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "prevod ttf fontov"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "prevod pfm fontov"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Ignorova� pracovn� s�bory"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Re�tart XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Ignorova� s�bory s fontami"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs restart"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Pred pridan�m fontov sa pros�m uistite, �e na va�om po��ta�i m�te pr�va ich "
-"prid�va�.\n"
-"\n"
-"-Pre prid�vanie fontov m��ete pou�i� �tandartn� sp�sob. V �peci�lnych "
-"pr�padoch v�ak chybn� fonty m��u sp�sobi� vytuhnutie X servera."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Import fontov"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Prevzia� fonty z Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Odstr�nenie fontov"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Pokro�il� nastavenia"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Zoznam fontov"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Zvo�te aplik�cie ktor� bud� podporova� fonty:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Tla�iarne pre v�eobecn� pou�itie"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Zvo�te adres�r fontov a kliknite na 'Pridaj'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Nain�taluj zoznam"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "Kliknite sem, ak ste si ist�."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "sem ak nie"
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Odzna�i� v�etky"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Vyber v�etko"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Odstr�ni� zoznam"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Po�iato�n� testy"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kop�rova� fonty na v� syst�m"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "In�tal�cia a konverzia fontov"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Odstr�ni� fonty zo syst�mu"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Zdie�anie pripojenia k internetu"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Zdie�anie internetov�ho pripojenia je moment�lne povolen�"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Nastavenie zdie�ania internetov�ho pripojenia u� bolo uroben�.\n"
-"Moment�lne je povolen�.\n"
-"\n"
-"�o chcete urobi�?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "zak�za�"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "odmietnu�"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "prekonfigurova�"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Zakazujem servre..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Zdie�anie internetov�ho pripojenia je teraz zak�zane."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Zdie�anie internetov�ho pripojenia je moment�lne zak�zane"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Nastavenie zdie�ania internetov�ho pripojenia u� bolo uroben�.\n"
-"Moment�lne je zak�zan�.\n"
-"\n"
-"�o chcete urobi�?\""
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "povoli�"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Povo�ujem servre..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Zdie�anie internetov�ho pripojenia je teraz povolen�."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"M�te mo�nos� nastavi� zdielanie pripojenia na internet. S touto funkciou\n"
-"bud� m�c� ostatn� po��ta�e vo va�ej lok�lnej sieti pou��va� pripojenie na "
-"internet v�ho po��ta�a.\n"
-"\n"
-"Pozn�mka: Potrebujete samostatn� sie�ov� kartu na pripojenie lok�lnej siete."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Rozhranie %s (pou��va modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Rozhranie %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Vo va�om syst�me nieje sie�ovy adapt�r!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Vo va�om syst�me nebol n�jden� sie�ovy ethernet adapt�r. Pros�m spustite "
-"konfigur�ciu hardweru."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Sie�ove rozhranie"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Vo va�om syst�me je iba jeden sie�ov� adapt�r:\n"
-"\n"
-"%s\n"
-"\n"
-"Lok�lna sie� bude nastaven� pr�ve s t�mto adapt�rom."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Pros�m vyberte si sie�ovy adapt�r, ktor� bude pripojen� k va�ej lok�lnej "
-"sieti."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Sie�ov� rozhranie je u� nastaven�"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Varovanie. Si�ov� adapt�r (%s) je u� nastaven�.\n"
-"\n"
-"�el�te si automatick� rekonfigur�ciu?\n"
-"\n"
-"M��ete to urobi� manu�lne, ale mus�te vedie�, �o rob�te."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatick� zmena konfigur�cie"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Zobraz aktu�lne nastavenie rozhrania"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Aktu�lne nastavenie `%s':\n"
-"\n"
-"Sie�: %s\n"
-"IP adresa: %s\n"
-"IP attribution: %s\n"
-"Ovl�da�: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Je mo�n� zachova� s��asn� nastavenie a predpoklada�, �e u� m�te nastaven� "
-"DHCP server; v tom pr�pade pros�m skontrolujte, �e je spr�vne nastaven� "
-"lok�lna sie�; v nastaveniach sa nebud� robi� �iadne zmeny.\n"
-"\n"
-"Ak si to v�ak �el�te, je mo�n� zmeni� aj rozhranie lok�lnej siete, aj "
-"nastavenie DHCP serveru.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Lok�lna sie� triedy C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP tohoto DHCP servera"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Op�tovn� nastavenie DHCP servera"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "��slo lok�lnej siete nekon�� na .0, zk��am znovu."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Potenci�lny konflik LAN adries v aktu�lnej konfigur�cii %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Bola n�jden� kofigur�cia firewalu!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Pozor! Bola n�jden� existuj�ca konfigur�cia firewallu. Mo�no budete musiet "
-"urobi� zop�r ru�nych z�sahov po in�tal�cii."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigur�cia..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigur�cia skriptov, in�talovanie programov, �tart serverov..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probl�my pri in�tal�cii bal��ka %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"V�etko bolo nastaven�.\n"
-"Teraz m��ete zdie�a� va�e pripojenie na internet s ostatn�mi po��ta�mi na "
-"va�ej lok�lnej sieti pou�it�m automatick�honastavenia siete (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Nastavenie u� bolo uroben� a je moment�lne zak�zan�."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Nastavenie u� bolo uroben� a je moment�lne povolen�."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Zdie�anie internetov�ho pripojenia e�te nebolo nastaven�."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Konfigur�cia zdia�ania pripojenia k internetu"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"V�tajte v utilite na zdie�anie pripojenia k internetu!\n"
-"\n"
-"%s\n"
-"\n"
-"Kliknite na Nastavi� ak chcete spusti� sprievodcu nastaven�m."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Konfigur�cia siete (%d rozhran�)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Zma� profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Zmena profilu:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nov� profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "Meno nov�ho profilu (nov� profil bude vytvoren� ako k�pia aktu�lneho)"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Meno po��ta�a: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Pr�stup k internetu"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Typ:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Br�na:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Rozhranie:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "�akajte pros�m"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfigur�cia pr�stupu k internetu..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Konfigur�cia LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Ovl�da�"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Rozhranie"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfigur�cia lok�lnej siete..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Pre spustenie Pomocn�ka kliknite sem ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Sprievodca..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Aplikova�"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Pros�m �akajte... Aplikujem konfigur�ciu"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Pripojen�."
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nepripojen�"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Pripojenie..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Odpojenie..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Varovanie. Bolo rozpoznan� in� pripojenie na internet, mo�no pou��va va�u "
-"sie�."
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nem�te nastaven� �iadne rozhranie.\n"
-"Nastavte ho kliknut�m na Konfiguruj"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Konfigur�cia LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapt�r %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "�tartovac� protokol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Spusten� pri �tarte"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktivuj teraz"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktivuj"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Toto rozhranie e�te nebolo nastaven�.\n"
-"Spustite Pomocn�ka nastavenia v hlavnom okne"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nem�te nastaven� pripojenie na internet.\n"
-"Vytvorte ho zakliknut�m tla��tka konfiguruj"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfigur�cia pripojenia internetu"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfigur�cia pripojenia internetu"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Typ pripojenia: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametre"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Br�na"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet karta"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Nastavujem �rove� bezpe�nosti"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontroln� centrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Vyberte n�stroj, ktor� chcete pou�i�"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanadsk� (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (k�bel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (k�bel - hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "��na"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japonsko"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japonsko (k�bel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "V�chodn� eur�pa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "�rsko"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Z�padn� Eur�pa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Austr�lia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nov� Z�land"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Ju�n� Afrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argent�na"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Pros�m,\n"
-"zadajte va�u TV normu a krajinu"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV norma:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Oblas� :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Prebieha vyh�ad�vanie TV programov..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Vyhlad�vanie TV programov"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "pou�itie: keyboarddrake [--expert] [kl�vesnica]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Pros�m, zvo�te v� typ kl�vesnice"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Chcete aby BackSpace vr�til Delete na konzole?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Vyme� CD"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Pros�m vlo�te in�tala�n� CD do mechaniky a stla�te Ok.\n"
-"Ak ho nem�te, stla�te Zru�i� pre priamu aktualiz�ciu."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Nem��em spusti� priamu aktualiz�ciu !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Uk�za� iba pre vybran� de�"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/S�bor/_Nov�"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/S�bor/_Otvor"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/S�bor/_Ulo�"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>U"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/S�bor/Ulo�i� _ako"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/S�bor/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Parametre"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Parametre/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Pomoc"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Pomoc/_O aplik�cii..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "U��vate�"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Spr�vy"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Popis Mandrake N�strojov"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "h�adaj"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "N�stroj na monitorovanie logov"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Nastavenia"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "porovn�vam"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "nezodpovedaj�"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Zvo�te s�bor"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalend�r"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Obsah s�boru"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "V�straha cez Mail/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "pros�m �akajte, analyzujem s�bor: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Nastavenie v�strahy cez SMS alebo e-mail"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Vitajte v n�stroji na nastavenie SMS/e-mail.\n"
-"\n"
-"Tu budete m�c� nastavit v�strahy syst�mu.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "nastavenie slu�ieb"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Ak nebude funk�n� vyzna�en� slu�ba, budete upozornen�"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "na��ta� nastavenie"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Ak load prekro�� t�to hodnotu, budete upozornen�"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "Konfigur�cia upozornen�"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Nastavte cestu, akou V�s m� syst�m upozorni�"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Ulo� ako.."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Pros�m, zvo�te typ va�ej my�i."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nebolo n�jden� serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulova� 3 tla��tka?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s n�jden� v %s, nastavi�?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Zvo�te scaner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Tento %s skener nieje podporovan�"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Boot zariadenie"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Konfigur�cia firewalu"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Konfigur�cia firewalu"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"U� m�te nastaven� firewall.\n"
-"Kliknite na Nastavi� ak ho chcete zmeni� alebo odtr�ni�"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Kliknite na Nastavi� ak chcete nastavi� �tandardn� firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Vo�ba jazyka"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Vo�ba triedy in�tal�cie"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detekcia pevn�ho disku"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfigur�cia my�i"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "V�ber kl�vesnice"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Bezpe�nos�"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "S�borov� syst�my"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Form�tovanie oddielov"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "V�ber bal�kov"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "In�tal�cia syst�mu"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Vytv�ranie u��vate�ov"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Sie�ov� slu�by"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Nastavenie slu�ieb"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "In�tal�cia zav�dza�a"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Zav�dzacia disketa"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigur�cia X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "In�tal�cia aktualiz�ci� syst�mu"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Koniec in�tal�cie"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall konfigur�tor\n"
-"\n"
-"Nastavuje osobn� firewall pre v� Linux Mandrake syst�m na tomto\n"
-"po��ta�i. "
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Teraz nieko�ko ot�zok o tom, na ktor� slu�by chcete dovoli� pr�stup\n"
-"z internetu. Pros�m zva�ujte �i potrebujete jednotliv� slu�by preto�e\n"
-"bezpe�nos� v�ho po��ta�a je d�le�it�.\n"
-"\n"
-"Ak nepou��vate tieto slu�by, je lep�ie zabr�ni� pr�stupu z internetu.\n"
-"Nastavenie m��ete zmeni� jednoducho op�tovn�m spusten�m\n"
-"tejto aplik�cie."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Chcete aby bol v� www server dostupn� z internetu ? Ak v�m sta��\n"
-"dostupnos� iba z lok�lneho servera, m��ete odpoveda� Nie.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Pou��vate na va�om po��ta�i menn� server ? Ak sa o va�e DNS z�znamy\n"
-"star� napr�klad v� poskytovate� internetu, odpovedzte pros�m nie. \n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Chcete dovoli� pr�chodzie Secure Shell (ssh) pripojenia ? Ssh je n�hrada\n"
-"za telnet, ktor� m��ete pou�i� na prihl�senie sa k vzdialen�mu serveru.\n"
-"Telnet nepou��va k�dovanie. To znamen�, �e �to�n�k m��e ukradn�� \n"
-"va�e heslo. Ssh k�dovanie pou��va, tak�e kr�de� v�ho hesla nehroz�."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Chcete dovoli� pripojenia cez telnet ? Toto je ve�mi nebezpe�n�.\n"
-"Silne doporu�ujeme Tu odpoveda� NIE a pou�i� ssh ako n�hradu \n"
-"za telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Chcete pou��va� FTP server dosiahnute�n� cez internet ? Ak �no, ve�mi \n"
-"doporu�ujeme aby ste pou��vali iba anonymn� prenosy. Ak�ko�vek heslo\n"
-"zaslan� FTP serveru m��e by� ukradnut�, preto�e FTP pri prenose hesiel\n"
-"nepou��va k�dovanie.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"M�te spusten� mail server ? Ak pou��vate textov� e-mail\n"
-"klieny ako pine, alebo mutt, tak asi m�te. V opa�nom pr�pade\n"
-"by ste t�to slu�bu mali vypn��.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"M�te spusten� POP alebo IMAP slu�by? Tieto m��u by�\n"
-"pou�it� pre pr�stup k e-mailov�m schr�nkam u��vate�ov.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Vyzer� to, �e  m�te kernel verzie 2.2.x. Ak je va�a IP adresa\n"
-"automaticky nastavovan� pri zmene prostredia (domov, praca)\n"
-"potrebujete dovoli� t�to mo�nos�. Je to tento pr�pad ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"M� v� po��ta� synchronizovan� �as vo�i in�mu po��ta�u?\n"
-"V��inou sa t�to slu�ba pou��va v stredne ve�k�ch organiz�ci�ch\n"
-"k�li jednotn�mu �asu v logoch a podobne. Ak nie ste s��as�\n"
-"nie�oho v��ieho a e�te ste o takejto slu�be nepo�uli, \n"
-"pravdepodobne to nebudete potrebova�."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Kofigur�cia kompletn�. M�m zap�sa� zmeny na disk ?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Nem��em otvori� %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Nem��em otvori� %s pre z�pis: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Konfigur�cia firewalu"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Pros�m �akajte, pripravujem in�tal�ciu"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Sie�ovy po��ta� (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, SSH server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kancel�ria"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome stanica"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "N�stroje pre v� Palm Pilot alebo Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Pracovn� stanica"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domain Name a Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kancel�rske programy: editory (kword, abiword), tabu�kov� procesory "
-"(kspread, gnumeric), pdf prehliada�e, atd"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "N�stroje pre audio: mp� alebo midi prehr�va�e, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knihy a n�vody pre Linux a Free Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE stanica"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, at�"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multim�dia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "N�stroje na mail, spr�vy, web, prenos s�borov, a chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Dtab�zy"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL alebo MySQL datab�zov� server"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "N�stroje na jednoduch� konfigur�ciu v�ho po��ta�a"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multim�dia - Zvuk"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Pom�cky"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokument�cia"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konzolov� n�stroje"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix mail server, Inn news server"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetov� stanica"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedialna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfigur�cia"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Viac grafick�ch prostred� (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Enviroment, grafick� prostredie s mno�stvom pribalen�ch programov"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafick� prostredie"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache a Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "N�stroje na vytvorenie a nap�lenie CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kancel�rska stanica"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, at�"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafick� programy ako napr. The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C a C++ v�vojove kni�nice, programy a include s�bory"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Sie�ov� server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/Spr�vy"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Hracia stanica"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Prehrava�e a editory videa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multim�dia - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Z�bavne programy: stolov�, strat�gie, at�"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"N�stroje na ��tanie a posielanie mailov a spr�v (pine, mutt, tin..) a "
-"prehliadanie www"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archiv�cia, emul�tory, monitorovanie"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Osobn� financie"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Grafick� rozhranie s aplik�ciami a desktopov�mi n�strojmi"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienty pre r�zne protokoly vr�tane ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Br�na k internetu"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programy na prehr�vanie/editovanie zvuku a videa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "In� grafick� prostredia"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editory, shelly, s�borove n�stroje, termin�ly"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programy na spr�vu va��ch financi�, napr. gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Osobn� informa�n� mana�ment"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multim�dia - CD napa�ovanie"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Vedeck� stanica"
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid "About"
-#~ msgstr "O "
-
-#~ msgid "             Help           "
-#~ msgstr "             Pomoc"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Nem��em pristupova� k modulom jadra, ktor� patria k V�mu jadru (ch�ba "
-#~ "s�bor %s)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Zvo�te predvolen� tla�iare�"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Aplikuj/Znovu na��taj"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Teraz m��ete zada� parametre pre modul %s."
-
-#~ msgid "mount failed"
-#~ msgstr "pripojenie zlyhalo "
-
-#~ msgid "Low"
-#~ msgstr "Slab�"
-
-#~ msgid "Medium"
-#~ msgstr "Stredn�"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr "V tejto �rovni je viac varovan� a kontroly."
-
-#~ msgid "Boot mode"
-#~ msgstr "M�d �tartu"
-
-#~ msgid "Export"
-#~ msgstr "Export"
-
-#~ msgid "click here"
-#~ msgstr "kliknite sem"
-
-#~ msgid ""
-#~ "This %s scanner uses parallel port, which is unsupported for the moment"
-#~ msgstr ""
-#~ "Tento %s skener pou��va paraleln� port, ktor� e�te nieje podporovan�."
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux spravuje �as v GMT a preklad� ho na lok�lny\n"
-#~ "�as s ohladom na �asov� z�nu, ktor� ste zvolili."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Pripoji� k internetu"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Odpoji� od internetu"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Konfigur�cia sie�ov�ho pripojenia (LAN alebo internet)"
-
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Rozpoznan� %s, �el�te si ho nastavi�?"
-
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Pros�m zvo�te tla�iare�, ktor� chcete nastavi�"
-
-#~ msgid "Infos"
-#~ msgstr "Inform�cie"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "H�ad�m mo�n� nfs zdroje"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "H�ad�m mo�n� nfs zdroje na serveri %s"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "H�ad�m mo�n� samba zdroje"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "H�ad�m mo�n� samba zdroje na serveri %s"
-
-#~ msgid "Removable media"
-#~ msgstr "Vymenite�n� m�dium"
-
-#~ msgid "Active"
-#~ msgstr "Akt�vny"
-
-#~ msgid "No X"
-#~ msgstr "Nie X"
-
-#~ msgid "Base system only"
-#~ msgstr "Iba z�kladn� syst�m"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Bola zisten� tla�iare�, model \"%s\" na "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Lok�lne zariadenie tla�iarne"
-
-#~ msgid "Printer Device"
-#~ msgstr "Zariadenie tla�iarne"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "Ch�ba zariadenie alebo meno s�boru."
-
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Tla�iare� na vzdialenom CUPS serveri"
-
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Tla�iare� na vzdialenom serveri"
-
-#~ msgid " Linux "
-#~ msgstr " Linux"
-
-#~ msgid " System "
-#~ msgstr " Syst�m"
-
-#~ msgid " Other "
-#~ msgstr " In�"
-
-#~ msgid " A Entire System  "
-#~ msgstr " Cel� Syst�m"
-
-#~ msgid "please choose your CD space"
-#~ msgstr "Pros�m zvo�te priestor na CD"
-
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr " Pros�m skontrolujte �i pou��vate CDRW m�dium"
-
-#~ msgid " Tape "
-#~ msgstr " P�ska"
-
-#~ msgid " Use .backupignore files"
-#~ msgstr "Pou�i s�bory .backupignore"
-
-#~ msgid "Configure it"
-#~ msgstr "Nastav to"
-
-#~ msgid "on CDROM"
-#~ msgstr "na CDROM"
-
-#~ msgid "on Tape Device"
-#~ msgstr "na P�skov� zariadenie"
-
-#~ msgid " Cancel "
-#~ msgstr " Zru�"
-
-#~ msgid "     Help      "
-#~ msgstr "     Pomoc"
-
-#~ msgid " Ok "
-#~ msgstr " Ok"
-
-#~ msgid "     Next      "
-#~ msgstr "     Nasleduj�ci"
-
-#~ msgid "close"
-#~ msgstr "zatvori�"
diff --git a/perl-install/share/po/sl.po b/perl-install/share/po/sl.po
deleted file mode 100644
index f27bc3b16..000000000
--- a/perl-install/share/po/sl.po
+++ /dev/null
@@ -1,11880 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Alen Salamun <alien@alienworld.org>, 2000.
-# (1938)
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-09-05 20:49+0200\n"
-"Last-Translator: Alen Salamun <alien@alienworld.org>\n"
-"Language-Team: Slovenian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafi�na kartica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Izberite grafi�no kartico"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Izberite stre�nik X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Stre�nik X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Izberite stre�nik X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "Stre�nik X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Katero nastavitev stre�nika XFree �elite?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va�a kartica lahko uporablja strojno 3D pospe�evanje, ampak samo z XFree %"
-"s.\n"
-"Va�a kartica je podprta s strani XFree %s, kjer je lahko bolj�a 2D podpora."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Va�a kartica lahko uporablja strojno 3D pospe�evanje z XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s s strojnim 3D pospe�evanjem"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Va�a kartica lahko uporablja strojno 3D pospe�evanje z XFree %s,\n"
-"PODPORA JE �E V RAZVOJU, RA�UNALNIK SE LAHKO PRENEHA ODZIVATI."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s z RAZVOJNO strojno 3D pospe�itvijo"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va�a kartica lahko uporablja strojno 3D pospe�evanje, ampak samo z XFree %"
-"s,\n"
-"PODPORA JE �E V RAZVOJU, RA�UNALNIK SE LAHKO PRENEHA ODZIVATI.Va�a kartica "
-"je podprta s strani XFree %s, kjer je lahko bolj�a 2D podpora."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Nastavitev XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Izberite velikost pomnilnika grafi�ne kartice"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Izberite nastavitve stre�nika"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Izberite monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Kriti�na parametra sta: vertikalna osve�itev (to je hitrost s katero je "
-"osve�en celoten zaslon) in najbolj pomembna horizontalna osve�itev (to je "
-"hitrost s katero so osve�ene vrstice).\n"
-"\n"
-"ZELO POMEMBNO je, da ne izberete monitorja z osve�itvami, ki so izven "
-"sposobnosti va�ega monitorja. S tem lahko po�kodujete monitor!\n"
-"�e ste v dvomih, izberite konservativno nastavitev."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontalna sinhronizacija"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikalna sinhronizacija"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor ni nastavljen"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafi�na kartica �e ni nastavljena"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Lo�ljivost �e ni izbrana"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "�elite preizkusiti nastavitev?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Pozor: testiranje te grafi�ne kartice lahko povzro�i neodzivanje ra�unalnika"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Preizkus nastavitev"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"poskusite spremeniti nekatere parametre"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Pri�lo je do napake:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Zapu��am v %d sekundah"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Je to pravilna nastavitev?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Pri�lo je do napake, poskusite spremeniti nekatere parametre"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Lo�ljivost"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Izberite lo�ljivost in barvno globino"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafi�na kartica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Stre�nik XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-#, fuzzy
-msgid "More"
-msgstr "Premakni"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "V redu"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Expert Mode"
-msgstr "Napredni na�in"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Poka�i vse"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Lo�ljivosti"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Razpored tipkovnice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tip mi�ke: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Naprava mi�ke: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizontalna frekvenca monitorja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertikalna frekvenca monitorja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafi�na kartica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafi�na kartica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafi�ni pomnilnik: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Barvna globina: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Lo�ljivost: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Stre�nik XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Gonilnik XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Priprava nastavitev X-Windows"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Kaj �elite narediti?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Spremeni monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Spremeni grafi�no kartico"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Spremeni nastavitve stre�nika"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Spremeni lo�ljivost"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Poka�i informacije"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Testiraj ponovno"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Izhod"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Ohrani spremembe?\n"
-"Trenutna nastavitev:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X v zagonu"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ra�unalnik lahko samodejno pri zagonu sistema za�ene stre�nik X.\n"
-"�elite zagnati stre�nik X pri zagonu?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Za uveljavitev sprememb, se ponovno prijavite v %s"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Odjavite se in nato pritisnite Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 barv (8 bitov)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tiso� barv (15 bitov)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tiso� barv (16 bitov)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milijonov barv (24 bitov)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde barv (32 bitov)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB ali ve�"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardni VGA, 640�480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800�600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Zdru�ljiv z 8514, 1024�768 @ 87 Hz prepleteno (brez 800�600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024�768 @ 87 Hz prepleteno, 800�600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Raz�irjen Super VGA, 800�600 @ 60 Hz, 640�480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Neprepleten SVGA, 1024�768 @ 60 Hz, 800�600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Visoko frekven�en SVGA, 1024�768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor, ki zmore 1280�1024 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor, ki zmore 1280�1024 @ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor, ki zmore 1280�1024 @ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor, ki zmore 1600�1200 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor, ki zmore 1600�1200 @ 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Prvi sektor zagonskega razdelka"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor pogona (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Namestitev SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kam �elite namestiti zagonski nalagalnik?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Namestitev LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-#, fuzzy
-msgid "Yaboot"
-msgstr "Korenski"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Glavne mo�nosti zagonskega nalagalnika"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-#, fuzzy
-msgid "Bootloader to use"
-msgstr "Glavne mo�nosti zagonskega nalagalnika"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Namestitev zagonskega nalagalnika"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Zagonska naprava"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne deluje z starej�imi BIOS-i)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompaktno"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompaktno"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Grafi�ni na�in"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Pavza pred zaganjanjem privzete slike"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Geslo"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Geslo (ponovno)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Omejitev mo�nosti ukazne vrstice"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "omeji"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Pri zagonu po�isti /tmp"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Natan�na velikost pomnilnika RAM, �e je potrebno (najdenih %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Omogo�i ve� profilov"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Podajte velikost pomnilnika v MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Mo�nost ``Omejitev mo�nosti ukazne vrstice'' ni uporabna brez gesla"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Poskusite ponovno"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Gesla se ne ujemata"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-#, fuzzy
-msgid "Default OS?"
-msgstr "Privzeto"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Tukaj so razli�ni vnosi.\n"
-"Lahko dodate �e kak�nega ali spremenite obstoje�ega"
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Kon�ano"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Spremeni RAID"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Kak�en tip vnosa �elite dodati?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Ostali OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Ostali OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Ostali OS (Okna...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Slika"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Korenski"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Pripni"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Branje-pisanje"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Tvegano"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Labela"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Privzeto"
-
-#: ../../any.pm_.c:326
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Odstrani vnos"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Prazna labela ni dovoljena"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Potrebujete razdelek swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ta labela je �e uporabljena"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Najdenih %s %s vmesnikov"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Imate �e kak�nega?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Imate vmesnike %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Glejte informacije o strojni opremi"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Namestitev gonilnika za %s kartico %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kateri %s gonilnik naj poizkusim?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"V nekaterih primerih potrebuje gonilnik %s za pravilno delovanje dodatne\n"
-" informacije. Lahko se zgodi, da deluje normalno tudi brez. �elite navesti\n"
-"dodatne nastavitve zanj ali dovolite gonilniku da poskusi pridobiti "
-"potrebne\n"
-"informacije samodejno? Lahko se zgodi, da se ra�unalnik nepredvidoma "
-"ustavi,\n"
-"kar pa naj ne bi povzro�ilo nobene �kode."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Samodejna zaznava"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Navedite nastavitve"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sedaj lahko posredujete nastavitve za modul %s.\n"
-"Nastavitve so oblike ``ime=vrednost ime2=vrednost2 ...''.\n"
-"Na primer: ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Nastavitve modula:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Nalaganje modula %s je bilo neuspe�no.\n"
-"�elite poskusiti znova z drugimi parametri?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(�e dodano %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Geslo je preve� preprosto"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Vnesite uporabni�ko ime"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Uporabni�ko ime mora vsebovati samo male �rke, �tevilke, `-' in `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "To uporabni�ko ime je �e dodano"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Dodaj uporabnika"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Vnesite uporabnika\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Sprejmi uporabnika"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Pravo ime"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Uporabni�ko ime"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Lupina"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Samodejna prijava"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ra�unalnik lahko samodejno, po zagonu, v sistem prijavi uporabnika.\n"
-"�e tega ne �elite, pritisnite gumb prekli�i."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Izberite privzetega uporabnika:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Izberite okenskega upravitelja, ki naj bo pognan:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Ali �elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr ""
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Dodaj uporabnika"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-#, fuzzy
-msgid "Custom"
-msgstr "Prilagojeno"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "Zaganjam X"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Izberite pakete, ki jih �elite namestiti"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Prekli�i"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr ""
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr ""
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr ""
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr ""
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr ""
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr ""
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Privzeto"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Izberite nastavitve stre�nika"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Pozdravljeni v izbiralcu operacijskega sistema %s!\n"
-"\n"
-"Izberite operacijski sistem iz zgornjega seznama ali\n"
-"pocakajte %d sekund za prevzet zagon.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Pozdravljeni v izbiralcu operacijskega sistema GRUB!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Uporabite tipke %c in %c za izbiro vnosa"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite enter za zagon izbranega OS, 'e' za urejevanje"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ukazov pred zagonom ali 'c' za ukazno vrstico."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Izbran vnos bo zagnan samodejno cez %d sekund."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "premalo prostora v /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Namizje"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Meni Start"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kam �elite namestiti zagonski nalagalnik?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pomo� �e ni implementirana.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Nastavitev zagonskega stila"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Datoteka"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izhod"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Monitor"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Spremeni monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Zagon Aurore pri nalaganju sistema"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-#, fuzzy
-msgid "Configure"
-msgstr "Nastavitev X"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistemski na�in"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Zagon sistema X-Windows pri zagonu sistema"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne, ne �elim samodejne prijave"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, �elim samodejno prijavo s tem uporabnikom"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "V redu"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "/etc/inittab ni mogo�e odpreti za branje: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minut"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekund"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Razdelkov ni ve� mogo�e dodati"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Prekli�i"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr ""
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr ""
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Splo�no"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr ""
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr ""
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Namestiti"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr ""
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Najprej naredite varnostno kopijo podatkov"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Pazljivo preberite!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"�e nameravate uporabiti aboot, pustite dovolj prostega prostora (2048 "
-"sektorjev je dovolj)\n"
-"na za�etku diska"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Napaka"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "�arovnik"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Izberite akcijo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Imate velik FAT razdelek (ponavadi v uporabi\n"
-"DOS-a/Oken). Predlagamo vam, da najprej \n"
-"spremenite velikost tega razdelka (pritisnite\n"
-"nanj, nato pa pritisnite \"Spremeni velikost\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Kliknite na razdelek"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Podrobnosti"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "priklop neuspe�en"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Prazno"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Drugo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipi datote�nih sistemov:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Ustvari"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tip"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Namesto tega uporabite ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Izbri�i"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Najprej uporabite ``Odklopi''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Po spremembi tipa razdelka %s, bodo vsi podatki na tem razdelku izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Izberite akcijo"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Ustvarjanje novega razdelka"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Spremeni v napredni na�in"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Spremeni v normalen na�in"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Razveljavi"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Naj nadaljujem?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Zapri brez zapisovanja sprememb"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Zapri brez zapisovanja razdelitvene tabele?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "�elite preizkusiti nastavitev?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Samodejno dodeljevanje"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Izbri�i vse"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Prepoznavanje trdega diska"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Vsi primarni razdelki so uporabljeni"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Razdelkov ni ve� mogo�e dodati"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"�e �elite imeti ve� razdelkov, enega izbri�ite, tako da bo mo�no ustvariti "
-"raz�irjen razdelek"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Zapi�i razdelitveno tabelo"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Re�evanje razdelitvene tabele"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Re�evanje razdelitvene tabele"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Re�evanje razdelitvene tabele"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Izberite datoteko"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Velikost varnostne kopije zagonske tabele nima enake velikosti\n"
-"Naj nadaljujem?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Opozorilo"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Vstavite disketo v disketni pogon\n"
-"Vsi podatki na tej disketi bodo uni�eni"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Re�evanje razdelitvene tabele"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Poka�i informacije"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "To�ka priklopa"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Mo�nosti"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Spremeni velikost"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Premakni"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatiraj"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Priklopljeno"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Dodaj k RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-#, fuzzy
-msgid "Add to LVM"
-msgstr "Dodaj k RAID"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Odklopi"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Odstrani iz RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-#, fuzzy
-msgid "Remove from LVM"
-msgstr "Odstrani iz RAID"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Spremeni RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Uporabi za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Ustvarjanje novega razdelka"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Za�etni sektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Velikost v MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tip datote�nega sistema: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "To�ka priklopa:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Lastnosti:"
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatiranje loopback datoteko %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Spremeni tip razdelka"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Kateri datote�ni sistem �elite?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kam �elite priklopiti loopback datoteko %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kam �elite priklopiti napravo %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne morem izklopiti to�ke priklopa, ker je ta razdelek uporabljen za "
-"loopback.\n"
-"Najprej odstranite loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Ra�unanje mej FAT datote�nega sistema"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Spreminjanje velikosti"
-
-#: ../../diskdrake/interactive.pm_.c:609
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Kateremu razdeleku �elite spremeniti velikost?"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Podatki na tem razdelku naj bodo arhivirani"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Po spremembi velikosti razdelka %s bodo vsi podatki na tem razdelku "
-"izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Izberite novo velikost"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Velikost v MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na kateri disk �elite premakniti?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na kateri sektor �elite premakniti?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Premikanje"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Premikanje razdelka..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Izberite obstoje� RAID za dodajanje"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nov"
-
-#: ../../diskdrake/interactive.pm_.c:714
-#, fuzzy
-msgid "Choose an existing LVM to add to"
-msgstr "Izberite obstoje� RAID za dodajanje"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ta razdelek ne more biti uporabljen za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Ime loopback datoteke: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Pravo ime"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Datoteko �e uporablja drug loopback, izberite drugo"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Datoteka �e obstaja. Jo uporabim?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Nastavitve modula:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "naprava"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "stopnja"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "velikost kosa"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Bodite previdni: Ta operacija je nevarna."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Kateri tip razdelitve?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Oprostite, vendar /boot ne morete ustvariti tako dale� na pogonu (na "
-"cilinder > 1024).\n"
-"Ali boste uporabljali LILO, ki ne bo deloval ali pa ne boste uporabljali "
-"LILO, tako da /boot ne potrebujete"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Razdelek, ki ste ga izbrali kot korenskega (/), se fizi�no nahaja za\n"
-"1024-im cilindrom trdega diska in tudi razdelka /boot nimate.\n"
-"�e nameravate uporabljati LILO, ne pozabite dodati /boot razdelka"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Za korenski (/) razdelek ste izbrali programski RAID razdelek.\n"
-"Nobeden zagonski nalagalnik ne bo deloval brez /boot razdelka.\n"
-"Ne pozabite dodati /boot razdelka"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Razdelitvena tabela pogona %s bo zapisana na disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Preden bodo obveljale spremembe morate ponovno zagnati ra�unalnik"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Po formatiranju razdelka %s bodo vsi podatki na tem razdelku izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatiranje"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiranje loopback datoteko %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiranje razdelka %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Premalo razpolo�ljivega prostora za nov razdelek"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Premalo razpolo�ljivega prostora za nov razdelek"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Lo�ljivost: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Naprava:"
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "�rka DOS pogona: %s (ugibanje)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tip:"
-
-#: ../../diskdrake/interactive.pm_.c:1044
-#, fuzzy
-msgid "Name: "
-msgstr "Izberite stre�nik"
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Za�etek: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Velikost: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorjev"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilinder %d do cilinder %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatirano\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Neformatirano\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Priklopljeno\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID ms%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Datoteka(e) loopback: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Prevzet zagonski razdelek\n"
-"    (za zagon MS-DOS, ne za lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Stopnja %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Velikost kosa %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diski %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Datoteka loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Velikost: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindrov, %s glav, %s sektorjev\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informacije: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, fuzzy, c-format
-msgid "LVM-disks %s\n"
-msgstr "RAID-diski %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tip razdelitvene tabele: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na vodilu %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Mo�nosti: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Tip datote�nega sistema: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Gesla se ne ujemata"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Spremeni tip razdelka"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Kliknite na razdelek"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Izberite stre�nik"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatiranje %s neuspe�no"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Formatiranje %s s tipom %s ni poznano"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "napaka pri odklopu %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "preprosto"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "stre�nik"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS ne morete uporabiti na razdelkih manj�ih od 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS ne morete uporabiti na razdelkih manj�ih od 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "To�ke priklopa se morajo za�eti z /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Razdelek s to�ko priklopa %s �e obstaja\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Da imenik bi naj ostal na korenskem datote�nem sistemu"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Za to to�ko priklopa potrebujete pravi datote�ni sistem(ext2, reiserfs)\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Za to to�ko priklopa potrebujete pravi datote�ni sistem(ext2, reiserfs)\n"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Premalo razpolo�ljivega prostora za nov razdelek"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Napaka pri odpiranju %s za pisanje: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Pri�lo je do napake - ni veljavnih naprav na katerih bi se lahko ustvaril "
-"nov datote�ni sistem. Preverite strojno opremo za mo�en vzrok problema"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nimate razdelkov!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Sedaj lahko izberete servise, ki se naj za�enejo pri zagonu. Ko boste z\n"
-"mi�ko nad servisom, se vam bo prikazal balon�ek s pomo�jo, ki opisuje\n"
-"vlogo posameznega servisa.\n"
-"\n"
-"Bodite posebej pozorni pri tem koraku, �e boste ra�unalnik uporabljali kot\n"
-"stre�nik: verjetno ne boste �eleli poganjati servisov, ki jih ne �elite."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Izberite \"Namestitev\", �e nimate name��ene �e nobene razli�ice Mandrake "
-"Linux\n"
-"ali �e �elite uporabljati ve� operacijskih sistemov.\n"
-"\n"
-"\n"
-"Izberite \"Nadgradnja\", �e �elite nadgraditi �e obstoje�o razli�ico "
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"Glede na va�e znanje o sistemu GNU/Linux, lahko izbirate med naslednjimi "
-"razredi namestitve ali nadgradnje\n"
-"operacijskega sistema Mandrake Linux:\n"
-"\n"
-"\t* Priporo�eno: �e niste �e nikdar name��ali operacijskega sistema GNU/"
-"Linux izberite to mo�nost. Namestitev bo preprosta,\n"
-"\t  odgovoriti boste morali samo na nekaj vpra�anj.\n"
-"\n"
-"\n"
-"\t* Prilagojeno: �e poznate operacijski sistem GNU/Linux, lahko izberete "
-"primarni namen uporabe (delovna postaja,\n"
-"\t  stre�nik, razvoj) va�ega sistema. Odgovoriti boste morali na ve� "
-"vpra�anj kot pri namestitvi \"Priporo�eno\",\n"
-"\t  tako da morate za izbiro te namestitvene mo�nosti poznati operacijski "
-"sistem GNU/Linux.\n"
-" \n"
-"\n"
-"\t* Napredno: �e zelo dobro poznate operacijski sistem GNU/Linux, lahko "
-"izberete to mo�nost. Kot pri namestitvi \n"
-"\t \"Prilagojeno\", boste lahko tudi tukaj izbrali primarni namen uporabe "
-"(delovna postaja, stre�nik, razvoj). \n"
-"\t  Bodite pazljivi pri izbiri te namestitve. Namestili boste posebej visoko "
-"prilagojeno namestitev.\n"
-"\t  Odgovori na nekatera vpra�anja so lahko te�avni, �e nimate dovolj znanja "
-"o sistemu GNU/Linux. Ne izberite\n"
-"\t  tega razreda, razen �e veste kaj po�nete."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Izberite pravilna vrata. Npr: COM1 pod Okni so poimenovana ttyS0\n"
-"pod GNU/Linux-om."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) in Grub sta zagonska nalagalnika. Omogo�ata zagon\n"
-"GNU/Linux-a ali kateregakoli drugega operacijskega sistema na va�em\n"
-"ra�unalniku. Ponavadi so drugi operacijski sistemi pravilno prepoznani in\n"
-"name��eni. V primeru, da ni tako, lahko tukaj ro�no dodate vnos. Pazljivo\n"
-"izberite pravilne parametre."
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Izberite kam �elite zapisati\n"
-"informacije potrebne za zagon GNU/Linux-a.\n"
-"\n"
-"\n"
-"Razen, �e natan�no veste kaj delate, izberite \"Prvi sektor pogona (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX bo sedaj posku�al poiskati PCI SCSI krmilnik(e). \n"
-"�e bo najden kak�en SCSI krmilnik in prepoznan gonilnik zanj, bo gonilnik\n"
-"samodejno name��en.\n"
-"\n"
-"\n"
-"�e nimate SCSI krmilnikov ali imate ISA ali PCI SCSI krmilnik, ki ga DrakX\n"
-"ne prepozna, boste vpra�ani, �e imate v sistemu kak�en SCSI krmilnik. �e v\n"
-"sistemu nimate SCSI krmilnikov pritisnite \"Ne\". �e boste pritisnili \"Da\" "
-"se\n"
-"vam bo odprl seznam gonilnikov, iz katerega lahko izberete krmilnik.\n"
-"\n"
-"\n"
-"�e boste ro�no izbrali gonilnik, vas bo DrakX vpra�al �e �elite dolo�iti\n"
-"nastavitve zanj. Dovolite DrakX-u, da jih poskusi nastaviti samodejno.\n"
-"\n"
-"\n"
-"�e tega ne boste izbrali, boste morali nastavitve vnesti sami. Poglejte v\n"
-"uporabni�ki priro�nik (poglavje 3, razdelek \"Collective informations on "
-"your hardware)\n"
-"za nasvete, kako pridobiti to informacijo iz dokumentacije strojne opreme,\n"
-"spletne strani proizvajalca (�e imate dostop do internet-a) ali Microsoft "
-"Oken\n"
-"(�e jih imate name��ena)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Izberite stre�nik"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Potrebujete korenski razdelek.\n"
-"Ustvarite nov razdelek (ali izberite obstoje�ega).\n"
-"Nato izberite ``To�ka priklju�itve'' in jo nastavite na `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Potrebujete razdelek swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nimate razdelka swap\n"
-"\n"
-"Naj vseeno nadaljujem?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Potrebujete razdelek swap"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Uporabi razpolo�ljiv prostor"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Premalo razpolo�ljivega prostora za nov razdelek"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Uporabi obstoje� razdelek"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Na voljno ni nobenega obstoje�ega razdelka"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Uporabi razdelek Oken (Windows) za loopback"
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kateri razdelek �elite uporabiti za Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Izberite velikosti"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Velikost korenskega razdelka v MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Velikost razdelka swap v MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Uporabi razpolo�ljiv prostor v razdelku Oken (Windows)"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kateremu razdeleku �elite spremeniti velikost?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Ra�unanje mej datote�nega sistema Oken (Windows)"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Spreminjalec velikosti FAT ne deluje na va�em razdelku, \n"
-"pri�lo je do naslednje napake: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Va� razdelek Oken (Windows) je preve� fragmentiran. Najprej po�enite "
-"``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"OPOZORILO!\n"
-"\n"
-"DrakX bo sedaj spremenil velikost razdelku Oken (Windows). Bodite previdni:\n"
-"ta operacija je nevarna. �e tega �e niste opravili, kon�ajte namestitev in\n"
-"za�enite scandisk pod Okni (�e �elite po�enite �e defrag), nato ponovno\n"
-"za�enite namestitev. Naredite tudi varnostno kopijo podatkov.\n"
-"�e ste prepri�ani, pritisnite \"V redu\"."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "razdelek %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Spreminjanje velikosti FAT neuspe�no: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ni ve� razdelkov FAT za spremembo velikosti ali uporabo kot loopback\n"
-"(ali premalo prostora)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Brisanje celotnega diska"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Odstranjevanje Oken(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Imate ve� kot en trdi disk, na katerega �elite namestiti Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "VSI razdelki in podatki na disku %s bodo izgubljeni"
-
-#: ../../install_interactive.pm_.c:190
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Uporabi obstoje� razdelek"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Uporabi fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sedej lahko ustvarjate/spreminjate razdelke na %s.\n"
-"Po kon�anem delu ne pozabite shraniti sprememb z ukazom `w'"
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Uporabi razpolo�ljiv prostor v razdelku Oken (Windows)"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Razdelkov ni ve� mogo�e dodati"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX-ov �arovnik za razdelke je najdel naslednje re�itve:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Vklop omre�ja"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Izklop omre�ja"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Pri�lo je do napake, ki je sistem ne zna obdelati na lep na�in.\n"
-"Nadaljujte na svojo odgovornost."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Podvojena to�ka priklopa %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Nekateri pomembni paketi niso bili ustrezno name��eni.\n"
-"Verjetno imate povarjen CD medij ali pogon CD-ROM.\n"
-"Preverite medij na ra�unlaniku z Linux-om z uporabo ukaza \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Pozdravljeni v %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Na voljno ni nobenega disketnega pogona"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Vstop v korak `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Izberite kartico"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:243
-#, fuzzy
-msgid "Percentage of packages to install"
-msgstr "Izberite kartico"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Razli�ica: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Velikost: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:422
-#, fuzzy
-msgid "The following packages are going to be installed"
-msgstr "Izberite kartico"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Namestiti"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Shrani na disketo"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Izhod iz namestitve"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Izberite pakete, ki jih �elite namestiti"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Name��anje"
-
-#: ../../install_steps_gtk.pm_.c:509
-#, fuzzy
-msgid "Estimating"
-msgstr "Zaganjam X"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Preostal �as "
-
-#: ../../install_steps_gtk.pm_.c:528
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Priprava namestitbe"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Name��anje paketa %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#, fuzzy
-msgid "Refuse"
-msgstr "Spremeni velikost"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Naj vseeno nadaljujem?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "�elite preizkusiti nastavitev?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Izberite kartico"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-#, fuzzy
-msgid "Which installation class do you want?"
-msgstr "Kateri stre�nik potrebujete?"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Install/Update"
-msgstr "Namestiti"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Priporo�eno"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Napredno"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Izberite pakete za namestitev"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Ali �elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-#, fuzzy
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Kateri stre�nik potrebujete?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Nastavitev kartic PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-#, fuzzy
-msgid "Configuring IDE"
-msgstr "Nastavitev zaslona"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:327
-#, fuzzy
-msgid "no available partitions"
-msgstr "Zaganjam X"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-#, fuzzy
-msgid "Choose the mount points"
-msgstr "Ali �elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Ali �elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:396
-#, fuzzy
-msgid "Root Partition"
-msgstr "Zaganjam X"
-
-#: ../../install_steps_interactive.pm_.c:397
-#, fuzzy
-msgid "What is the root partition (/) of your system?"
-msgstr "Kateri stre�nik potrebujete?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:435
-#, fuzzy
-msgid "Choose the partitions you want to format"
-msgstr "Ali �elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:462
-#, fuzzy
-msgid "Formatting partitions"
-msgstr "Zaganjam X"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Complete (%dMB)"
-msgstr "Obi�ajni DAC"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Recommended (%dMB)"
-msgstr "Obi�ajni DAC"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Obnovi z diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Obnovi z diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Izberite stre�nik"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Shrani na disketo"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Priprava namestitbe"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:842
-#, fuzzy
-msgid "Post-install configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Izberite stre�nik"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Izberite stre�nik"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:967
-#, fuzzy
-msgid "Which is your timezone?"
-msgstr "Kateri stre�nik potrebujete?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "Izberite stre�nik"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1015
-#, fuzzy
-msgid "No printer"
-msgstr "Odstrani vnos"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Imate �e kak�nega?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044
-#, fuzzy
-msgid "Mouse"
-msgstr "Premakni"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-#, fuzzy
-msgid "Printer"
-msgstr "Izberite stre�nik"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Nastavitev gesla root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Izberite stre�nik"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1136
-#, fuzzy
-msgid "NIS Server"
-msgstr "Izberite stre�nik"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1187
-#, fuzzy
-msgid "First floppy drive"
-msgstr "Izberite stre�nik"
-
-#: ../../install_steps_interactive.pm_.c:1188
-#, fuzzy
-msgid "Second floppy drive"
-msgstr "Izberite stre�nik"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Preskok"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-#, fuzzy
-msgid "Sorry, no floppy drive available"
-msgstr "Izberite stre�nik"
-
-#: ../../install_steps_interactive.pm_.c:1212
-#, fuzzy
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Ali �elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Izberite stre�nik"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-#, fuzzy
-msgid "Do you want to use aboot?"
-msgstr "Ali �elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Namestitev zagonskega nalagalnika"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-#, fuzzy
-msgid "Automated"
-msgstr "Prilagojeno"
-
-#: ../../install_steps_interactive.pm_.c:1361
-#, fuzzy
-msgid "Replay"
-msgstr "Nalo�i ponovno"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Izberite akcijo"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informacije"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Mo�nosti: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Ali �elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr ""
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr ""
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr ""
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr ""
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr ""
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr ""
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Izberite tipkovnico"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr ""
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr ""
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr ""
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabela"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Izberite tipkovnico"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kro�ni priklopi %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr ""
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr ""
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr ""
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Splo�no"
-
-#: ../../mouse.pm_.c:46
-#, fuzzy
-msgid "Wheel"
-msgstr "stopnja"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr ""
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr ""
-
-#: ../../mouse.pm_.c:55
-#, fuzzy
-msgid "Mouse Systems"
-msgstr "Tip mi�ke: %s\n"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr ""
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr ""
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr ""
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ni�"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Preizkusite mi�ko"
-
-#: ../../mouse.pm_.c:500
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Preizkusite mi�ko"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-#, fuzzy
-msgid "Connect to the Internet"
-msgstr "Kateri frekven�ni �ip (ang. clockchip) imate?"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:37
-#, fuzzy
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Kateri stre�nik potrebujete?"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-#, fuzzy
-msgid "Choose the network interface"
-msgstr "Izberite kartico"
-
-#: ../../network/ethernet.pm_.c:93
-#, fuzzy
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Kateri stre�nik potrebujete?"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-#, fuzzy
-msgid "Configuring network"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Napredni na�in"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "What kind is your ISDN connection?"
-msgstr "Kateri stre�nik potrebujete?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-#, fuzzy
-msgid "ISDN Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Preizkus nastavitev"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-#, fuzzy
-msgid "Which protocol do you want to use ?"
-msgstr "Kateri stre�nik potrebujete?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:216
-#, fuzzy
-msgid "Which is your ISDN card ?"
-msgstr "Kateri stre�nik potrebujete?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-#, fuzzy
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Kateri stre�nik potrebujete?"
-
-#: ../../network/modem.pm_.c:44
-#, fuzzy
-msgid "Dialup options"
-msgstr "Izberite stre�nik"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-#, fuzzy
-msgid "Connection name"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-#, fuzzy
-msgid "Login ID"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Izberite stre�nik"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Izberite stre�nik"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Nastavitev RAMDAC"
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Kateri frekven�ni �ip (ang. clockchip) imate?"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Nastavitev zaslona"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Kateri frekven�ni �ip (ang. clockchip) imate?"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Izberite stre�nik"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Nastavitev omre�ja"
-
-#: ../../network/netconnect.pm_.c:50
-#, fuzzy
-msgid "Internet connection & configuration"
-msgstr "Izberite stre�nik"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Nastavitev RAMDAC"
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr "Nastavitev RAMDAC"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-#, fuzzy
-msgid "Network Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Izberite privzetega uporabnika:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Nastavitev RAMDAC"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Podvojena to�ka priklopa %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Izberite stre�nik"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Izberite stre�nik"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "Cable connection"
-msgstr "Izberite stre�nik"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Izberite stre�nik"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, fuzzy
-msgid "LAN connection"
-msgstr "Izberite stre�nik"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Ali �elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Izberite stre�nik"
-
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Do you want to start the connection at boot?"
-msgstr "Ali �elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../network/netconnect.pm_.c:247
-#, fuzzy
-msgid "Network configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "�elite preizkusiti nastavitev?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid "Configuring network device %s"
-msgstr "Nastavitev RAMDAC"
-
-#: ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "Gonilnik XFree86: %s\n"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr ""
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr ""
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr ""
-
-#: ../../network/network.pm_.c:311
-#, fuzzy
-msgid "Automatic IP"
-msgstr "Prilagojeno"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network/network.pm_.c:366
-#, fuzzy
-msgid "DNS server"
-msgstr "Izberite stre�nik"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-#, fuzzy
-msgid "Gateway device"
-msgstr "Zagonska naprava"
-
-#: ../../network/network.pm_.c:381
-#, fuzzy
-msgid "Proxies configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:39
-#, fuzzy
-msgid "Internet configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/tools.pm_.c:40
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Xconfigurator bo zdaj zagnal X in preveril nastavitve."
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Nastavitev RAMDAC"
-
-#: ../../network/tools.pm_.c:50
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Kateri frekven�ni �ip (ang. clockchip) imate?"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Nastavitev zaslona"
-
-#: ../../network/tools.pm_.c:76
-#, fuzzy
-msgid "Connection Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr ""
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "Izberite stre�nik"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "Izberite stre�nik"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Izberite tipkovnico"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr ""
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "priklop neuspe�en: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr ""
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr ""
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr ""
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr ""
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:27
-#, fuzzy
-msgid "nice"
-msgstr "Preklic"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr ""
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr ""
-
-#: ../../printer.pm_.c:48
-#, fuzzy
-msgid "Remote printer"
-msgstr "Odstrani vnos"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Izberite stre�nik"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Izberite stre�nik"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Izberite stre�nik"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr ""
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Izberite stre�nik"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Izberite stre�nik"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Tiskalnik"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Odstrani vnos"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "razdelek %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modul %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Izberite stre�nik"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Privzeto)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-#, fuzzy
-msgid "Port"
-msgstr "Formatiraj"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Nastavitev zagonskega stila"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Tiskalnik"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Podvojena to�ka priklopa %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Tiskalnik"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Kateri stre�nik potrebujete?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Name��anje paketa %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Name��anje paketa %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:704
-#, fuzzy
-msgid "SMB server host"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:705
-#, fuzzy
-msgid "SMB server IP"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-#, fuzzy
-msgid "Printer Server"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-#, fuzzy
-msgid "Printer Device URI"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1006
-#, fuzzy
-msgid "Description"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Kateri tip razdelka �elite?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Xconfigurator bo zdaj zagnal X in preveril nastavitve."
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Testiraj ponovno"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Premakni"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Izklop omre�ja"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Izklop omre�ja"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Nastavitev RAMDAC"
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Nastavitev omre�ja"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor ni nastavljen"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Nastavitev zaslona"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Kateri stre�nik potrebujete?"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Kateri stre�nik potrebujete?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kateri stre�nik potrebujete?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Nastavitev tiskalnika"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Name��anje paketa %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-#, fuzzy
-msgid "Printer options"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Nastavitev tiskalnika"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Xconfigurator bo zdaj zagnal X in preveril nastavitve."
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Tiskalnik"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Tukaj so razli�ni vnosi.\n"
-"Lahko dodate �e kak�nega ali spremenite obstoje�ega"
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Tukaj so razli�ni vnosi.\n"
-"Lahko dodate �e kak�nega ali spremenite obstoje�ega"
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Nastavitev omre�ja"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Obi�ajni DAC"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "�elite preizkusiti nastavitev?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "�elite preizkusiti nastavitev?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Izberite stre�nik"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "�elite preizkusiti nastavitev?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "�elite preizkusiti nastavitev?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Odstrani vnos"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Formatiraj"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Samodejna prijava"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Geslo"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Nastavitev gesla root"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Gesla se ne ujemata"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Zagon sistema X-Windows pri zagonu sistema"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Izberite stre�nik"
-
-#: ../../services.pm_.c:123
-#, fuzzy
-msgid "Internet"
-msgstr "Nastavitev zaslona"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Sistemski na�in"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Odstrani vnos"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Izberite stre�nik"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "naprava"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Opozorilo"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Pripni"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Korenski"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Meni Start"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Preizkus nastavitev"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Ve�predstavnost"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Kateri frekven�ni �ip (ang. clockchip) imate?"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Izberite stre�nik"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Napredno"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Name��anje paketa %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Napaka"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Nastavitev zagonskega stila"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-#, fuzzy
-msgid "Congratulations!"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Namestiti"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Dodaj uporabnika"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatiranje loopback datoteko %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Izberite stre�nik"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Izberite kartico"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Odstrani vnos"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Odstranjevanje Oken(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Uporabni�ko ime"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Preizkusite mi�ko"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Poskusite ponovno"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Poskusite ponovno"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Nastavitev gesla root"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Izberite stre�nik"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Izberite stre�nik"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Izberite kartico"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Kliknite na razdelek"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Izberite kartico"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Preizkusite mi�ko"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Tabela"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Uporabni�ko ime"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Izberite kartico"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Ali �elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Prepoznavanje trdega diska"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Uporabni�ko ime"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "stopnja"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "stopnja"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Nastavitve modula:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Izberite kartico"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Izberite kartico"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Nastavitev datote�nega sistema"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Mo�nosti"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Kateri stre�nik potrebujete?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Ali �elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Obnovi z diskete"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Ali �elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Drugo"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Namestitev sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Obnovi iz datoteke"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Obnovi iz datoteke"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Prilagojeno"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Pomo�"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Meni Start"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Obnovi iz datoteke"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Izberite pakete za namestitev"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Ali �elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Ali �elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Ali �elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Shrani v datoteko"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Preizkusite mi�ko"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Izberite kartico"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Nastavitev datote�nega sistema"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Kon�ano"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Priprava namestitbe"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "omeji"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatiranje razdelkov"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "To�ka priklopa"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Ali �elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Preklic"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Izberite stre�nik"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Namestitev sistema"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Izberite datoteko"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Odstrani vnos"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Namestiti"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Izhod iz namestitve"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-#, fuzzy
-msgid "Internet Connection Sharing"
-msgstr "Izberite stre�nik"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-#, fuzzy
-msgid "disable"
-msgstr "Tabela"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "reconfigure"
-msgstr "Nastavitev X"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Izberite stre�nik"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "enable"
-msgstr "Tabela"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Izberite stre�nik"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor ni nastavljen"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Nastavitev zagonskega stila"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "Izberite stre�nik"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-#, fuzzy
-msgid "Firewalling configuration detected!"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:340
-#, fuzzy
-msgid "Configuring..."
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:378
-#, fuzzy, c-format
-msgid "Problems installing package %s"
-msgstr "Name��anje paketa %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Izberite stre�nik"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Izberite stre�nik"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-#, fuzzy
-msgid "Profile: "
-msgstr "priklop neuspe�en: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-#, fuzzy
-msgid "Hostname: "
-msgstr "Izberite stre�nik"
-
-#: ../../standalone/draknet_.c:168
-#, fuzzy
-msgid "Internet access"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:181
-#, fuzzy
-msgid "Type:"
-msgstr "Tip:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-#, fuzzy
-msgid "Gateway:"
-msgstr "Zagonska naprava"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Nastavitev servisov"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Driver"
-msgstr "Izberite stre�nik"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Interface"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Meni Start"
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "�arovnik..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Preizkus nastavitev"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Not connected"
-msgstr "Izberite stre�nik"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Aktivno"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Aktivno"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Izberite stre�nik"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Izberite stre�nik"
-
-#: ../../standalone/draknet_.c:597
-#, fuzzy
-msgid "Connection type: "
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr ""
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Kateri frekven�ni �ip (ang. clockchip) imate?"
-
-#: ../../standalone/drakxconf_.c:48
-#, fuzzy
-msgid "Choose the tool you want to use"
-msgstr "Ali �elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Nalo�i ponovno"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-#, fuzzy
-msgid "Please, choose your keyboard layout."
-msgstr "Izberite kartico"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "Spremeni lo�ljivost"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-#, fuzzy
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Prika�i samo za ta dan"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Datoteka/_Nova"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Datoteka/_Odpri"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Datoteka/_Shrani"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Datoteka/Shrani _kot"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Datoteka/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Mo�nosti"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Mo�nosti/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Pomo�"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Pomo�/_O pomo�i..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Uporabni�ko ime"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "sporo�ilo"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "i��i"
-
-#: ../../standalone/logdrake_.c:185
-#, fuzzy
-msgid "A tool to monitor your logs"
-msgstr "Orodje za nadziranje log-ov"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Nastavitve"
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "ujemanje"
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "neujemanje"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Izberi datoteko"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Koledar"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Vsebina datoteke"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, fuzzy, c-format
-msgid "please wait, parsing file: %s"
-msgstr "prosim po�akaj, analiziram datoteko: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "naprava"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatiranje"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Shrani kot..."
-
-#: ../../standalone/mousedrake_.c:49
-#, fuzzy
-msgid "Please, choose the type of your mouse."
-msgstr "Ali �elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Izberite grafi�no kartico"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Zagonska naprava"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Izberite jezik"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Izberite razred namestitve"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Prepoznavanje trdega diska"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Nastavitev mi�ke"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Izberite tipkovnico"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Nastavitev datote�nega sistema"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatiranje razdelkov"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Izberite pakete za namestitev"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Namestitev sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Dodaj uporabnika"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Nastavitev omre�ja"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Nastavitev servisov"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Namestitev zagonskega nalagalnika"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Ustvarjanje zagonske diskete"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Nastavitev X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Namestitev sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Izhod iz namestitve"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Napaka pri odpiranju %s za pisanje: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Nastavitev zaslona"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Priprava namestitbe"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Izberite stre�nik"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office"
-msgstr "Preklic"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Ve�predstavnost"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "�elite preizkusiti nastavitev?"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Ve�predstavnost"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Documentation"
-msgstr "Nastavitve modula:"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Ve�predstavnost"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "stre�nik"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Izberite stre�nik"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Ve�predstavnost"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Ve�predstavnost"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Nastavitev zaslona"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Priklopljeno"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Ni�"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Izberite privzetega uporabnika:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Odstrani vnos"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Sedaj lahko posredujete nastavitve za modul %s."
-
-#~ msgid "mount failed"
-#~ msgstr "priklop neuspe�en"
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Ve�predstavnost"
-
-#~ msgid "Boot mode"
-#~ msgstr "Zagonski na�in"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Napredno"
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Sedaj lahko izberete �asovno cono, glede na to kje �ivite.\n"
-#~ "\n"
-#~ "\n"
-#~ "GNU/Linux uporablja �as v formatu GMT ali \"Greenwich Mean Time\" in ga\n"
-#~ "prevede v lokalni �as glede na izbrano �asovno cono."
-
-#, fuzzy
-#~ msgid "Connect to Internet"
-#~ msgstr "Kateri frekven�ni �ip (ang. clockchip) imate?"
-
-#, fuzzy
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Kateri frekven�ni �ip (ang. clockchip) imate?"
-
-#, fuzzy
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Nastavitev RAMDAC"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Na kateri disk �elite premakniti?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Izberite kartico"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Informacije"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Nastavitev zaslona"
-
-#~ msgid "authentification"
-#~ msgstr "overjanje"
-
-#~ msgid "user"
-#~ msgstr "uporabnik"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Ali �elite sedaj zagnati ,X -probeonly`?"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Kon�aj"
-
-#~ msgid "Active"
-#~ msgstr "Aktivno"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Ne"
-
-#, fuzzy
-#~ msgid "Printer Device"
-#~ msgstr "Izberite stre�nik"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Izberite stre�nik"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Izberite stre�nik"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Sistemski na�in"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Drugo"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Izberite kartico"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Kliknite na razdelek"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tip:"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Nastavitev X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Izberite stre�nik"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Prekli�i"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "V redu"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Premakni"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "Nastavitev RAMDAC"
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "Nastavitev RAMDAC"
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "Kateri frekven�ni �ip (ang. clockchip) imate?"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Izberite velikost, ki jo �elite namestiti"
-
-#~ msgid "Total size: "
-#~ msgstr "Celotna velikost: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Prosim po�akajte, "
-
-#~ msgid "Total time "
-#~ msgstr "Skupen �as"
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Naj uporabim �e obstoje�o nastavitev X11?"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid "New"
-#~ msgstr "Nov"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Odstrani vnos"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Kliknite na razdelek"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "/etc/sysconfig/autologin ni mogo�e odpreti za branje: %s"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Razen �e specifi�no veste druga�e, je obi�ajna izbira \"/dev/hda\"\n"
-#~ " (primaren master IDE disk) ali \"/dev/sda\" (prvi SCSI disk)."
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "�elite preizkusiti nastavitev?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "�elite preizkusiti nastavitev?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "�elite preizkusiti nastavitev?"
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Nastavitev zaslona"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Izberite privzetega uporabnika:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Preizkusite mi�ko"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Izberite �eljen jezik za namestitev in uporabo sistema."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Za nadaljevanje namestitve morate sprejeti pogoje zgornje licence.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kliknite na \"Sprejmem\", �e se strinjate z pogoji.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kliknite na \"Ne sprejmem\", �e se ne strinjate z pogoji. Namestitev se "
-#~ "bo kon�ala brez sprememb na sistemu."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Izberite iz seznama razpored, ki ustreza va�i tipkovnici"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "�e �elite, da bodo po namestitvi na voljo tudi drugi jeziki\n"
-#~ "(zraven jezika, ki ste ga izbrali na za�etku namestitve), jih izberite\n"
-#~ "s spodnjem seznamu. �e �elite izbrati vse pritisnite \"Vse\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Izberite:\n"
-#~ "\n"
-#~ " - Prilagojeno: �e ste dovolj seznanjeni z GNU/Linux-om lahko izberete\n"
-#~ "   primaren namen uporabe sistema. Glejte spodaj za podrobnosti.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Napredno: Priporo�eno samo �e ste z GNU/Linux-om zelo dobro "
-#~ "seznanjeni\n"
-#~ "   in �elite opraviti visoko prilagojeno namestitev. Tudi tukaj boste "
-#~ "lahko\n"
-#~ "   izbrali primaren namen uporabe sistema.\n"
-#~ "   IZBERITE TO MO�NOST, �E RESNI�NO VESTE KAJ DELATE!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "\t* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "\t  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "\t  will then have a complete collection of software installed in order "
-#~ "to compile, debug and format source code,\n"
-#~ "\t  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "\t  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Sedaj morate izbrati namen uporabe sistema. Mo�nosti so:\n"
-#~ "\n"
-#~ "\t* Delovna postaja: izberite, �e boste uporabljali sistem predvsem za "
-#~ "vsakodnevno uporabo\n"
-#~ "\t  doma ali v pisarni.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Razvoj: �e boste sistem uporabljali predvsem za razvoj programske "
-#~ "opreme, je to dobra izbira. Name��ena\n"
-#~ "\t  bo celotna zbirka programske opreme za prevajanje, razhro��evanje in "
-#~ "oblikovanje izvorne kode in\n"
-#~ "\t  ustvarjanje programskih paketov.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Stre�nik: �e boste sistem uporabljali kot stre�nik, je to dobra "
-#~ "izbira. Namestili boste lahko datote�ni\n"
-#~ "\t  stre�nik (NFS ali SMB), tiskalni�ki stre�nik (Unix ali Microsoft "
-#~ "Okna), overitveni stre�nik (NIS), podatkovni\n"
-#~ "\t  stre�nik itd.. Ne pri�akuje namestitve nobenih dodatnih stvari (KDE, "
-#~ "GNOME, ipd.)."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Sedaj lahko izberete skupino paketov, ki jih �elite\n"
-#~ "namestiti ali nadgraditi\n"
-#~ "\n"
-#~ "DrakX bo nato preveril ali je za celotno namestitev na voljo dovolj "
-#~ "prostora\n"
-#~ "V primeru, da prostora ne bo dovolj, boste obve��eni. �e boste kljub\n"
-#~ "temu nadaljevali, se bo namestitev nadaljevala z izbranimi paketi, "
-#~ "vendar\n"
-#~ "bodo nekateri manj pomembni izpu��eni. �e boste na dnu seznama izbrali "
-#~ "mo�nost\n"
-#~ "\"Izbira posameznih paketov\", boste lahko izbirali med ve� kot 1000 "
-#~ "paketi..."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "�e imate vse CD-je iz spodnjega seznama, pritisnite 'V redu'.\n"
-#~ "�e nimate nobenega CD-ja iz spodnjega seznama, pritisnite 'Prekli�i'.\n"
-#~ "�e nekateri CD-ji manjkajo, jih odizberite, nato pritisnite 'V redu'."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Sedaj lahko vnesete mo�nosti omre�ja na klic. �e niste prepri�ani kaj "
-#~ "vnesti,\n"
-#~ "dobite pravilne informacije pri va�em ponudniku internet-a."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Vnesite:\n"
-#~ "\n"
-#~ "  - Naslov IP: �e ga ne poznate, povpra�ajte vzdr�evalca va�ega omre�ja.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Omre�na maska: \"255.255.255.0\" je ponavadi pravilna izbira. �e "
-#~ "niste\n"
-#~ "prepri�ani, povpra�ajte vzdr�evalca omre�ja.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Samodejni IP: izberite to mo�nost, �e v omre�ju uporabljate protokol\n"
-#~ "BOOTP ali DHCP. Pri izbiri te mo�nosti ni potrebno vnesti \"Naslov IP\". "
-#~ "�e\n"
-#~ "niste prepri�ani, povpra�ajte vzdr�evalca va�ega omre�ja.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "�e va�e omre�je uporablja NIS, izberite \"Uporabi NIS\". �e niste "
-#~ "prepri�ani,\n"
-#~ "povpra�ajte vzdr�evalca va�ega omre�ja."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Sedaj lahko vnesete mo�nosti omre�ja na klic. �e niste prepri�ani kaj "
-#~ "vnesti,\n"
-#~ "dobite pravilne informacije pri va�em ponudniku internet-a."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "�e boste uporabljali stre�nik proxy, ga sedaj nastavite. �e niste "
-#~ "prepri�ani\n"
-#~ "ali naj ga uporabljate, povpra�ajte va�ega ponudnika internet-a."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Paket za kriptografijo lahko namestite, �e ste pravilno namestili "
-#~ "povezavo v\n"
-#~ "internet. Najprej izberite zrcalni stre�nik iz katerega �elite prenesti\n"
-#~ "pakete, nato izberite pakete, katere �elite namestiti.\n"
-#~ "\n"
-#~ "Zrcalni stre�nik in pakete izberite v skladu z va�o zakonodajo."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Sedaj lahko vnesete geslo root za va� sistem Mandrake Linux\n"
-#~ "Geslo morate vnesti dvakrat, da se preveri identi�nost obeh\n"
-#~ "vnosov.\n"
-#~ "\n"
-#~ "Uporabnik root je administrator sistema in edini uporabnik, ki lahko\n"
-#~ "spreminja nastavitev sistema. Zato izberite geslo posebej pazljivo!\n"
-#~ "Neavtorizirana uporaba ra�una root je lahko zelo nevarna za integriteto\n"
-#~ "va�ega sistema in podatkov, ter ostalih sistemov povezanih nanj. Geslo "
-#~ "naj\n"
-#~ "bo sestavljeno iz alfanumeri�nih znakov in dolgo vsaj 8 znakov. NIKOLI "
-#~ "ga\n"
-#~ "nikamor ne zapisujte. Ne izberite predolgega ali preve� kompliciranega\n"
-#~ "gesla, da ga ne boste pozabili!"
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Sedaj lahko ustvarite enega ali ve� \"navadnih\" uporabni�kih ra�unov.\n"
-#~ "Ustvarite lahko enega ali ve� ra�unov za vsako osebo, ki ji boste "
-#~ "dovolili\n"
-#~ "uporabo ra�unalnika. Vsak uporabnik bo imel svoje lastnosti (grafi�no\n"
-#~ "okolje, nastavitve programov itd.) in svoj \"doma� imenik\", v katerem "
-#~ "bodo\n"
-#~ "te lastnosti shranjene.\n"
-#~ "\n"
-#~ "Najprej ustvarite ra�un zase! Tudi �e boste edin uporabnik sistema, se "
-#~ "NE\n"
-#~ "PRIJAVLJAJTE kot root za vsakodnevna opravila. To bi bil velik varnosti\n"
-#~ "riziko, saj je neuporabnost sistema lahko oddaljena samo eno tipkarsko\n"
-#~ "napako!\n"
-#~ "\n"
-#~ "Zato se prijavljajte v sistem z uporabni�kim ra�unom, ki ga boste "
-#~ "ustvarili\n"
-#~ "tukaj. Kot root se prijavite samo za administracijske in vzdr�evalne "
-#~ "namene."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Glavne mo�nosti LILO in Grub so:\n"
-#~ "  - Zagonska naprava: Ime naprave (npr. razdelka na trdem disku\n"
-#~ "ki vsebuje zagonski sektor. Razen, �e specifi�no veste druga�e izberite\n"
-#~ "\"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pavza pred zagonom prevzete slike: �as v desetinkah sekunde, ki ga "
-#~ "naj\n"
-#~ "zagonski nalagalnik �aka, preden za�ne zaganjati prvo sliko.\n"
-#~ "Ta mo�nost je uporabna za sisteme, ki takoj po prepoznani tipkovnici\n"
-#~ "za�nejo zaganjati sistem. Zagonski nalagalnik ne �aka, �e pavza ni "
-#~ "dolo�ena\n"
-#~ "ali �e je vrednost postavljena na ni�.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video na�in: Tekstoven na�in VGA, ki naj bo izbran ob zagonu. Na "
-#~ "voljo\n"
-#~ "so naslednje vrednosti: \n"
-#~ "    * normal: normalen tekstoven na�in 80x25.\n"
-#~ "    * <�tevilka>: uporabi ustrezen tekstoven na�in."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO je SPARC zagonski nalagalnik: omogo�a zagon\n"
-#~ "GNU/Linux-a ali kateregakoli drugega operacijskega sistema na va�em\n"
-#~ "ra�unalniku. Ponavadi so drugi operacijski sistemi pravilno prepoznani "
-#~ "in\n"
-#~ "name��eni. V primeru, da ni tako, lahko tukaj ro�no dodate vnos. "
-#~ "Pazljivo\n"
-#~ "izberite pravilne parametre.\n"
-#~ "\n"
-#~ "\n"
-#~ "Lahko drugim tudi prepre�ite dostop do ostalih operacijskih sistemov. V\n"
-#~ "tem primeru izbri�ite odgovarjajo�e vnose, vendar boste za njihov zagon\n"
-#~ "kasneje potrebovali zagonsko disketo!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Glavne mo�nosti SILO so:\n"
-#~ "  - Namestitev zagonskega nalagalnika: Izberite kam �elite zapisati\n"
-#~ "informacije potrebne za zagon GNU/Linux-a. Razen, �e natan�no veste\n"
-#~ "kaj delate, izberite \"Prvi sektor pogona (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pavza pred zagonom prevzete slike: �as v desetinkah sekunde, ki ga "
-#~ "naj\n"
-#~ "zagonski nalagalnik �aka, preden za�ne zaganjati prvo sliko.\n"
-#~ "Ta mo�nost je uporabna za sisteme, ki takoj po prepoznani tipkovnici\n"
-#~ "za�nejo zaganjati sistem. Zagonski nalagalnik ne �aka, �e pavza ni "
-#~ "dolo�ena\n"
-#~ "ali �e je vrednost postavljena na ni�."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Sedaj je �as za nastavitev sistema X Windows, ki je jedro grafi�nega\n"
-#~ "sistema GNU/Linux. Nastaviti morate grafi�no kartico in monitor. Ve�ina\n"
-#~ "korakov je samodejnih, tako da boste verjetno morali samo preveriti\n"
-#~ "kaj je bilo narejeno in sprejeti nastavitve :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Po kon�ani nastavitvi, se bo zagnal sistem X (razen, �e niste tega\n"
-#~ "onemogo�ili v DrakX), tako da boste lahko preverili �e so vse nastavitve\n"
-#~ "pravilne. �e nastavitve ne bodo pravilne, jih lahko ponovno spremenite\n"
-#~ "kolikokrat bo pa� potrebno."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "�e je v nastavitvah sistema X kaj narobe, uporabite te mo�nosti za "
-#~ "pravilno\n"
-#~ "nastavitev sistema X Windows."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "�e bi raj�i uporabljali grafi�no prijavljanje v sistem, izberite \"Da\". "
-#~ "Druga�e\n"
-#~ "izberite \"Ne\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Sistem se bo ponovno zagnal.\n"
-#~ "\n"
-#~ "Po zagonu, se bo samodejno nalo�il va� nov sistem Mandrake Linux.\n"
-#~ "�e �elite zagon drugega operacijskega sistema, preberite dodatna navodila."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Zapi�i /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formatiraj vse"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Po formatiranju vseh razdelkov,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "bodo vsi podatki na teh razdelkih izgubljeni"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Tabela"
-
-#, fuzzy
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Nastavitev RAMDAC"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Premakni"
-
-#, fuzzy
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Izberite stre�nik"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "priklop neuspe�en: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Za bolj varen sistem izberite \"Uporabi datoteko 'shadow'\" in\n"
-#~ "\"Uporabi gesla MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "�e va�e omre�je uporablja NIS, izberite \"Uporabi NIS\". �e niste "
-#~ "prepri�ani,\n"
-#~ "povpra�ajte vzdr�evalca va�ega omre�ja."
-
-#, fuzzy
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Kateri frekven�ni �ip (ang. clockchip) imate?"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Kateri zagonski nalagalnik �elite uporabljati?"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Nastavitev zagonskega stila"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horizontalna aurora (lep�i izgled)"
-
-#~ msgid "vertical traditionnal aurora"
-#~ msgstr "vertikalna tradicionalna aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Sedaj lahko izberete razli�ne mo�nosti sistema.\n"
-#~ "\n"
-#~ "  - Uporabi optimizacijo za trde diske: ta mo�nost lahko izbolj�a "
-#~ "delovanje\n"
-#~ "    trdih diskov, vendar je samo za napredne uporabnike. Nekateri nabori\n"
-#~ "    �ipov z napakami lahko uni�ijo podatke, zato bodite pazljivi. Jedro\n"
-#~ "    ima vgrajeno seznam pogonov in naborov, ki povzro�ajo probleme, "
-#~ "vendar\n"
-#~ "    �e se �elite izogniti neprijetnim presene�enjem, pustite mo�nost\n"
-#~ "    neizbrano.\n"
-#~ "\n"
-#~ "  - Izberite varnostno stopnjo: izberete lahko varnostno stopnjo\n"
-#~ "    sistema. Za popolne informacije poglejte v navodila. Osnovno: \n"
-#~ "    �e neveste, izberite \"Srednja\".\n"
-#~ "\n"
-#~ "  - Natan�na velikost RAM-a. �e je potrebno: na�alost, je dana�njem "
-#~ "svetu\n"
-#~ "    PC ra�unalnikov ni standardne metode spra�evanja BIOS-a za velikost\n"
-#~ "    prisotnega pomnilnika. Zato lahko GNU/Linux nepravilno prepozna "
-#~ "velikost\n"
-#~ "    pomnilnika. V tem primeru lahko tukaj podate pravilno velikost "
-#~ "pomnilnika.\n"
-#~ "    Razlika za 2 ali 4 MB je normalna.\n"
-#~ "\n"
-#~ "  - Samodejno priklapljanje odstranitvenih medijev: �e ne �elite ro�no\n"
-#~ "    priklapljati odstranitvenih medijev (CD-ROM, diskete, Zip...) z "
-#~ "uporabo\n"
-#~ "    ukazov \"mount\" in \"umount\", izberite to mo�nost.\n"
-#~ "\n"
-#~ "  - Omogo�en NumLock pri zagonu: �e �elite NumLock omogo�iti pri zagonu,\n"
-#~ "    izberite to mo�nost (Opozorilo: NumLock lahko pod sistemom X dela ali "
-#~ "ne\n"
-#~ "    dela)."
-
-#~ msgid "Configure timezone"
-#~ msgstr "Nastavitev �asovne cone"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Drugo"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Uporabi diskdrake"
-
-#, fuzzy
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Izberite \"Namestitev\", �e nimate name��ene �e nobene razli�ice\n"
-#~ "GNU/Linux-a ali �e �elite uporabljati ve� razli�nih distribucij.\n"
-#~ "\n"
-#~ "Izberite \"Re�evanje\", �e �elite re�iti prej�njo razli�ico Linux-a "
-#~ "Mandrake:\n"
-#~ "%s ali %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Izberite:\n"
-#~ "\n"
-#~ " - Priporo�en: �e niste �e nikdar name��ali GNU/Linux-a, izberite to "
-#~ "mo�nost.\n"
-#~ "\n"
-#~ " - Prilagojen: �e ste dovolj seznanjeni z GNU/Linux-om, lahko izberete\n"
-#~ "   primaren namen uporabe sistema. Glejte spodaj za podrobnosti.\n"
-#~ "\n"
-#~ " - Napreden: Priporo�eno samo �e ste z GNU/Linux-om zelo dobro "
-#~ "seznanjeni\n"
-#~ "   in �elite opraviti zelo prilagojeno namestitev. Tudi tukaj boste "
-#~ "lahko\n"
-#~ "   izbrali primaren namen uporabe va�ega sistema.\n"
-#~ "   IZBERITE TO MO�NOST, �E RESNI�NO VESTE KAJ DELATE!\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "Na tej to�ki lahko izberete, katere razdeleke boste uporabili za "
-#~ "namestitev\n"
-#~ "sistema Mandrake Linux, �e so �e definirani (iz prej�njih namestitev GNU/"
-#~ "Linux\n"
-#~ "ali z drugimi orodji za razdelke). V drugih primerih je potrebo na trdem "
-#~ "disku\n"
-#~ "definirati razdelke. S tem razdelite kapaciteto trdega diska v lo�ena "
-#~ "logi�na podro�ja.\n"
-#~ "\n"
-#~ "\n"
-#~ "�e morate ustvariti nove razdelke, uporabite za samodejno ustvarjanje "
-#~ "razdelkov\n"
-#~ "GNU/Linux \"Samodejno alociranje\". Trdi disk izberete s pritiskom na "
-#~ "\"hda\"\n"
-#~ "za prvi IDE disk, \"hdb\" za drugi ali \"sda\" za prvi SCSI disk itd.\n"
-#~ "\n"
-#~ "Dva pogosta razdelka sta: korenski razdelek (/), ki je za�etna to�ka\n"
-#~ "zgradbe imenika datote�nega sistema in /boot, ki vsebuje vse datoteke\n"
-#~ "potrebne za zagon operacijskega sistema, po vklopu ra�unalnika.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ker so u�inki tega koraka nepovratni, je lahko ustvarjanje razdelkov\n"
-#~ "za neizku�enega uporabnika nevarno in zastra�ujo�e. DiskDrake vam\n"
-#~ "bo pri tem koraku karseda olaj�al delo. Preden nadaljujete si vzemite\n"
-#~ "�as in poglejte dokumentacijo.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do vsake mo�nosti lahko pridete z tipkami: med razdelki izbirate z\n"
-#~ "uporabo tipke Tab in pu��ic Navzgor/Navzdol. Ko izberete razdelek "
-#~ "pritisnite:\n"
-#~ "\n"
-#~ "- Ctrl-c za ustvarjanje novega razdelka (�e ste izbrali prazen razdelek)\n"
-#~ "\n"
-#~ "- Ctrl-d za brisanje razdelka\n"
-#~ "\n"
-#~ "- Ctrl-m za nastavitev to�ke priklopa\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Vsi, na novo ustvarjeni razdelki morajo biti pred uporabo formatirani\n"
-#~ "(formatiranje pomenu ustvarjanje datote�nega sistema). Na tej to�ki\n"
-#~ "lahko ponovno formatirate obstoje�e razdelke, tako da bodo podatki, ki\n"
-#~ "jih vsebujejo izbrisani. Opozorilo: obstoje�ih razdelkov vam ni potrebno\n"
-#~ "ponovno formatirati, posebej, �e vsebujejo datoteke ali podatke, ki jih "
-#~ "�elite obdr�ati. Ponavadi sta to razdelka /home in /usr/local."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Izbrani paketi se sedaj name��ajo. Ta operacija bo trajala nekaj\n"
-#~ "minut, razen �e ste izbrali nadgradnjo obstoje�ega sistema, v tem\n"
-#~ "primeru lahko prete�e ve� �asa celo preden se bo nadgradnja za�ela."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "�e DrakX ni na�el mi�ke ali �e �elite preveriti izbiro, boste\n"
-#~ "sedaj spodaj videli seznam mi�k.\n"
-#~ "\n"
-#~ "\n"
-#~ "�e se strinjate z nastavitvami DrakX, pritisnite 'V redu'.\n"
-#~ "Druga�e lahko iz menija izberete mi�ko, ki se bolje ujema z va�o.\n"
-#~ "\n"
-#~ "\n"
-#~ "V primeru serijske mi�ke, boste morali nastaviti tudi serijska vrata\n"
-#~ "na katera je priklju�ena."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Ta del je posve�en nastavitvi lokalnega omre�ja (LAN)\n"
-#~ "ali modema.\n"
-#~ "\n"
-#~ "Izberite \"Lokalno omre�je\" in DrakX bo posku�al\n"
-#~ "najti mre�no kartico v ra�unalniku. PCI kartice\n"
-#~ "bi morale biti najdene in inicializirane samodejno.\n"
-#~ "�e imate kartico tipa ISA, samodejna prepoznava ne bo delovala, tako\n"
-#~ "da boste morali izbrati gonilnik iz seznama, ki se bo prikazal.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tako kot za SCSI krmilnike, lahko tudi tukaj prvi� prepustite iskanje\n"
-#~ "naprave gonilniku, druga�e pa morate gonilniku podati pravilne "
-#~ "nastavitve,\n"
-#~ "ki jih lahko najdete s pomo�jo dokumentacije va�e strojne opreme.\n"
-#~ "\n"
-#~ "\n"
-#~ "�e name��ate sistem Mandrake Linux na ra�unalnik, ki je del �e "
-#~ "obstoje�ega\n"
-#~ "omre�ja, vam bo va� vzdr�evalec omre�ja posredoval vse potrebne\n"
-#~ "informacije (naslov IP, omre�na maska in ime ra�unalnika). �e doma\n"
-#~ "postavljate privatno omre�je samo za primer, izberite naslov sami.\n"
-#~ "\n"
-#~ "\n"
-#~ "Izberite \"Klicanje z modemom\" za nastavitev modemske povezave v\n"
-#~ "internet. DrakX bo posku�al najti modem, �e ne bo uspel, boste\n"
-#~ "morali nastaviti pravilna serijska vrata, na katerih imate priklju�en\n"
-#~ "modem."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "GNU/Linux omogo�a uporabo mnogih tipov tiskalnikov. Vsak tip\n"
-#~ "zahteva razli�ne nastavitve. Upo�tevajte pa, da je prevzeto ime\n"
-#~ "za tiskalnik, ki ga uporablja sistem, 'lp'; tako da morate imeti\n"
-#~ "tiskalnik s tem imenom; lahko pa tiskalniku daste ve� imen, lo�enih z\n"
-#~ "znakom '|'. �e �elite imeti bolj smiselno ime za tiskalnik, ga dajte\n"
-#~ "na prvo mesto npr: \"Moj tiskalnik|lp\".\n"
-#~ "Tiskalnik, ki bo imel v imenu \"lp\" bo prevzet tiskalnik.\n"
-#~ "\n"
-#~ "\n"
-#~ "�e je tiskalnik fizi�no povezan z ra�unalnikom izberite\n"
-#~ "\"Lokalen tiskalnik\". Nato boste morali izbrati primeren filter in\n"
-#~ "vrata, na katera je tiskalnik priklju�en.\n"
-#~ "\n"
-#~ "\n"
-#~ "�e �elite uporabljati tiskalnik, ki se nahaja na drugem ra�unalniku "
-#~ "Unix,\n"
-#~ "morate izbrati \"Oddaljen lpd\". Za delovanje ni potrebno vnesti\n"
-#~ "uporabni�kega imena in gesla, vnesti morate samo ime tiskalni�ke vrste\n"
-#~ "(printer queue) na oddaljenem stre�niku.\n"
-#~ "\n"
-#~ "\n"
-#~ "�e �elite uporabljati tiskalnik SMB (tiskalnik, ki je priklju�en na "
-#~ "ra�unalnik\n"
-#~ "z operacijskim sistemom Okna 9x/NT), morate poznati njegovo SMB ime (to "
-#~ "ni\n"
-#~ "njegovo TCP/IP ime) in verjetno �e njegov naslov IP. Za dostop pa boste\n"
-#~ "potrebovali �e uporabni�ko ime, geslo in delovno skupino. Enako velja za\n"
-#~ "tiskalnik priklju�en na Netware okolje, le da zanj ne potrebujete "
-#~ "delovne\n"
-#~ "skupine."
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Zelo priporo�ljivo je, da tukaj odgovorite z \"Da\". �e boste kasneje\n"
-#~ "name��ali Microsoft Okna, bodo Okna povozila zagonski sektor.\n"
-#~ "Razen, �e boste naredili zagonski disk kot predlagano, ne boste mogli "
-#~ "ve�\n"
-#~ "zagnati sistema GNU/Linux."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Premaknite kolesce!"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Pozabi spremembe?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Samodejna lo�ljivost"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Za zaznavo mo�nih lo�ljivosti, bodo sedaj razli�ne preizku�ene.\n"
-#~ "Zaslon bo utripal...\n"
-#~ "�e �elite, ga lahko izklopite, po koncu boste sli�ali pisk"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Mo�ne lo�ljivosti se lahko poi��ejo samodejno (npr: 800x600).\n"
-#~ "V�asih lahko pride do nepredvidene ustavitve sistema.\n"
-#~ "�elite poskusiti?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Najden ni bil noben veljaven na�in\n"
-#~ "Poskusite z drugo grafi�no kartico ali monitorjem"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Samodejno iskanje lo�ljivosti"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "nfs priklop neuspe�en"
diff --git a/perl-install/share/po/sp.po b/perl-install/share/po/sp.po
deleted file mode 100644
index 418059c8c..000000000
--- a/perl-install/share/po/sp.po
+++ /dev/null
@@ -1,12461 +0,0 @@
-# Cirilicni prevod drakbootdisk.po fajla.
-# Copyright (C) 1997-2000 GeaArt, Inc.
-# Tomislav Jankovic <tomaja@net.yu>, 2000.
-#
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: drakfloppy 0.43\n"
-"POT-Creation-Date: 2002-06-13 15:54+0200\n"
-"PO-Revision-Date: 2001-08-25 08:36GMT+1\n"
-"Last-Translator: Toma Jankovic <tomaja@net.yu>\n"
-"Language-Team: SERBIAN <office@mandrake.co.yu>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-5\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Configure all heads independently"
-msgstr "������ ��� ����� ���������"
-
-#: ../../Xconfigurator.pm_.c:244
-msgid "Use Xinerama extension"
-msgstr "������� Xinerama ��������j�"
-
-#: ../../Xconfigurator.pm_.c:247
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "������ ���� ������� \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "Multi-head configuration"
-msgstr "Multi-head ������������a"
-
-#: ../../Xconfigurator.pm_.c:251
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"�a� ������ �������� �ultiple head �����������j�.\n"
-"�� �� �� ����� �� ������e?"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Graphics card"
-msgstr "�������� �������"
-
-#: ../../Xconfigurator.pm_.c:263
-msgid "Select a graphics card"
-msgstr "��������� �������"
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "Choose a X server"
-msgstr "��������� X ������"
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "X server"
-msgstr "X ������"
-
-#: ../../Xconfigurator.pm_.c:294
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "��������� X ������"
-
-#: ../../Xconfigurator.pm_.c:294
-#, fuzzy
-msgid "X driver"
-msgstr "X ������"
-
-#: ../../Xconfigurator.pm_.c:361 ../../Xconfigurator.pm_.c:367
-#: ../../Xconfigurator.pm_.c:417 ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Which configuration of XFree do you want to have?"
-msgstr "���� XFree �����������j� ������ �� ����e ?"
-
-#: ../../Xconfigurator.pm_.c:375
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"�a�� ������� ���� ����� 3D ���������� ����������j� ��� ���� �a XFree %s.\n"
-"�a�� ������� �������a XFree %s ��j� ���� ��a�� ���� ������� � �� 2D."
-
-#: ../../Xconfigurator.pm_.c:377 ../../Xconfigurator.pm_.c:410
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "�a�� ������� ���� ����� 3D ���������� ����������j� �� XFree %s."
-
-#: ../../Xconfigurator.pm_.c:379 ../../Xconfigurator.pm_.c:412
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s �� 3D ����������� ����������j��"
-
-#: ../../Xconfigurator.pm_.c:387 ../../Xconfigurator.pm_.c:401
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"�a�� ������� ���� ����� 3D ���������� ����������j� ��� ���� �� XFree %s,\n"
-"�����¸µ �� j� ��� ����������°��A ������� �� 3D � ���� ������� �� "
-"������a�� ��������."
-
-#: ../../Xconfigurator.pm_.c:389 ../../Xconfigurator.pm_.c:403
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s �� ����������°���� 3D ����������� ����������j��"
-
-#: ../../Xconfigurator.pm_.c:398
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"�a�� ������� ���� ����� 3D ���������� ����������j� ��� ���� �� XFree %s,\n"
-"�����¸µ �� j� ��� ����������°��A ������� �� 3D � ���� ������� �� "
-"������a�� ��������.\n"
-"�a�� ������� �������a XFree %s ��j� ���� ��a�� ���� ������� � �� 2D."
-
-#: ../../Xconfigurator.pm_.c:418
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (���������ja ������j ���j���)"
-
-#: ../../Xconfigurator.pm_.c:422
-msgid "XFree configuration"
-msgstr "XFree ������������a"
-
-#: ../../Xconfigurator.pm_.c:497
-msgid "Select the memory size of your graphics card"
-msgstr "�������� �������� �� ��������� �������"
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Choose options for server"
-msgstr "������ �� ������"
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Choose a monitor"
-msgstr "��������� �������"
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Monitor"
-msgstr "�������"
-
-#: ../../Xconfigurator.pm_.c:578
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"������ �� �������� ������������ ��������������� ����� ����� ��������.\n"
-"������ �� ��� �������� �� ������� ������� ��������� ���� ����������\n"
-"������������� ����������� ��������, ��� �� �������� �������� �����.\n"
-"\n"
-"����� �� ����� �� �� �������� ��� �������� ���� ��� ���� ����� ���� ����\n"
-"��� �� ��� ��� �������. ��� ����� �������, ��������� ���� ���������."
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Horizontal refresh rate"
-msgstr "������������ �����������"
-
-#: ../../Xconfigurator.pm_.c:586
-msgid "Vertical refresh rate"
-msgstr "���������� �����������"
-
-#: ../../Xconfigurator.pm_.c:623
-msgid "Monitor not configured"
-msgstr "������� ���� ������������"
-
-#: ../../Xconfigurator.pm_.c:626
-msgid "Graphics card not configured yet"
-msgstr "�������� ����� ��� ���� �������������"
-
-#: ../../Xconfigurator.pm_.c:629
-msgid "Resolutions not chosen yet"
-msgstr "���������� ��� ���� ��������"
-
-#: ../../Xconfigurator.pm_.c:647
-msgid "Do you want to test the configuration?"
-msgstr "�� �� ������ �� ��������� �������������?"
-
-#: ../../Xconfigurator.pm_.c:651
-msgid "Warning: testing this graphics card may freeze your computer"
-msgstr "���������: ��������� ��� �������� ������� ���� ��������� �a� ����j����"
-
-#: ../../Xconfigurator.pm_.c:654
-msgid "Test of the configuration"
-msgstr "��������� �������������"
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"��������� �� �������� ����������"
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid "An error occurred:"
-msgstr "��, ������:"
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "����� �� %d �������"
-
-#: ../../Xconfigurator.pm_.c:745
-msgid "Is this the correct setting?"
-msgstr "�� �� �� ��� �������� ���e����?"
-
-#: ../../Xconfigurator.pm_.c:754
-msgid "An error occurred, try to change some parameters"
-msgstr "��, �������� �� ������, �������� �� ��������e ���������"
-
-#: ../../Xconfigurator.pm_.c:825
-msgid "Resolution"
-msgstr "����������"
-
-#: ../../Xconfigurator.pm_.c:877
-msgid "Choose the resolution and the color depth"
-msgstr "��������� ���������� � ���� ���� ��� ����a��"
-
-#: ../../Xconfigurator.pm_.c:879
-#, c-format
-msgid "Graphics card: %s"
-msgstr "�������� �������: %s"
-
-#: ../../Xconfigurator.pm_.c:880
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 ������: %s"
-
-#: ../../Xconfigurator.pm_.c:894 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "J��"
-
-#: ../../Xconfigurator.pm_.c:894 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:701
-#: ../../my_gtk.pm_.c:1034 ../../my_gtk.pm_.c:1056
-#: ../../standalone/drakbackup_.c:2288 ../../standalone/drakbackup_.c:2359
-#: ../../standalone/drakbackup_.c:2375
-msgid "Ok"
-msgstr "� ����"
-
-#: ../../Xconfigurator.pm_.c:896 ../../network/netconnect.pm_.c:173
-#: ../../printerdrake.pm_.c:2473 ../../standalone/drakfloppy_.c:146
-#: ../../standalone/draknet_.c:275 ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "E������ ���"
-
-#: ../../Xconfigurator.pm_.c:897
-msgid "Show all"
-msgstr "������� ���"
-
-#: ../../Xconfigurator.pm_.c:942
-msgid "Resolutions"
-msgstr "����������"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "��� ���������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "��� ����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "��� �� ��������� �� ������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "�������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "������� - �����������a �����������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "������� - ���������� ����������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1518
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "�������� �������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Graphics card identification: %s\n"
-msgstr "�������������� �������� �������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "�������� �� ��������� �������: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "���� ����: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "����������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1525
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 ������: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1526
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ���j���: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1544
-msgid "Preparing X-Window configuration"
-msgstr "������� ������������� �� X-Window ������"
-
-#: ../../Xconfigurator.pm_.c:1564
-msgid "What do you want to do?"
-msgstr "��� ������ �� �������?"
-
-#: ../../Xconfigurator.pm_.c:1569
-msgid "Change Monitor"
-msgstr "������� ��������"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Graphics card"
-msgstr "������� �������� �������"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Change Server options"
-msgstr "������� ������ ������"
-
-#: ../../Xconfigurator.pm_.c:1574
-msgid "Change Resolution"
-msgstr "������� ����������"
-
-#: ../../Xconfigurator.pm_.c:1575
-msgid "Show information"
-msgstr "������� �����������"
-
-#: ../../Xconfigurator.pm_.c:1576
-msgid "Test again"
-msgstr "�������� ������"
-
-#: ../../Xconfigurator.pm_.c:1577 ../../printerdrake.pm_.c:2476
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "����"
-
-#: ../../Xconfigurator.pm_.c:1585
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"������� �������?\n"
-"�������� �����������ja j�:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1606
-msgid "Graphical interface at startup"
-msgstr "X �������� �� ������"
-
-#: ../../Xconfigurator.pm_.c:1607
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"Ja ���� ������� ��� ������� �� ���������� ������ X �������� ��� ��������.\n"
-"�� �� ������ X �������� ��� �������� ?"
-
-#: ../../Xconfigurator.pm_.c:1613
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "�����, ������ ������� %s ���� ���������� �������"
-
-#: ../../Xconfigurator.pm_.c:1628
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "����� ��� ��������� �� � ����������� (Ctrl-Alt-BackSpace) �������"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ���� (8-����� ������)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ������ ���� (15-����� ������)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ������ ���� (16-����� ������)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ������� ���� (24-����� ������)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ��������� ���� (32-����� ������)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB ��� ����"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "���������� VGA, 640x480 �� 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "����� VGA, 800x600 �� 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 ������., 1024x768 �� 87 Hz �� ����������� (�� 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "����� VGA, 1024x768 �� 87 Hz �� �����������, 800x600 �� 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 �� 60 Hz, 640x480 �� 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA ��� ����������, 1024x768 �� 60 Hz, 800x600 �� 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "���������������� SVGA, 1024x768 �� 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "������� ���� ���� �� 1280x1024 �� 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "������� ���� ���� �� 1280x1024 �� 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "������� ���� ���� �� 1280x1024 �� 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "������� ���� ���� �� 1600x1200 �� 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "������� ���� ���� �� 1600x1200 �� 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "���� ������ ������� ���������"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "���� ������ ����� (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO �����������"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "��� ����� �� ����������� �������?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub �����������"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO �� ����������� ����je�"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO �� ��������� ����j��"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "�����a�� �� DOS/Windows-a (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "������ ������ �������a"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "������� ��j� �e �� ���������"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "���������ja �������a"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "������� (boot) ������"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (�� ���� �� ������ BIOS-��a)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "�������"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "�������"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "����� ���"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "����� ��� �������� default image-�"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1087 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:710 ../../printerdrake.pm_.c:808
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "�������"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1088
-msgid "Password (again)"
-msgstr "������� (��������)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "���������� �������� ������ - ������"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "����������"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "������ /tmp ��� ������ �����a��"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "�������� �������� RAM ��� �� �������� (����������� �� %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "������� �����-�������"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "������� �������� RAM-� � Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"������``���������� �������� ������ - ������'' �� ������������� ��� �������"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1143
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "Please try again"
-msgstr "�������� ������"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "The passwords do not match"
-msgstr "������������� �������"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "�����j���� �����a"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "������� Firmware �����"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "����� ��� �����a�� ������a"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "������� �����a�� �� CD-a?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "������� OF �����a��?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "������������� �� ?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"��� �� ��������� ������.\n"
-"������ ������ ���� ��� �������� �����."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:741
-#: ../../standalone/drakbackup_.c:850 ../../standalone/drakfont_.c:790
-#: ../../standalone/drakfont_.c:827
-msgid "Add"
-msgstr "�����"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "�������"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "�������"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "���� ����� ����a ����j��e ?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:884
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "����� ��-��� (SunOS,BSD,...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "����� ��-��� (MacOS,BSD,...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "����� ��-��� (Windows,BSD,BeOS,...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "�����"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "�����a�"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "������-������ RW"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "������"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "���������"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "������"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "�������������"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-�������a"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "������� ����"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "������ ������ ���� ���������"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "������ ������������� �������� image"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "������ �������� root ���������"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "��� ������ �� ��� � ��������"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "���������  %s %s ���������a"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "�� �� ����� ��� �����?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "����� �� ��� %s ����������?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "No"
-msgstr "��"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "Yes"
-msgstr "��"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "�������� ����������� � ��������"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "���������� ������� �� %s ������� %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(����� %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "���� %s ������� �� ������?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"� ����� �����������, ������� %s ������� ������� �����������\n"
-"�� �������� ���, ���� ���� ���� �� ���� � ��� ���. �� �� ������\n"
-"���� �� ������� ������� ������� �� ����, ��� �� �� ������� ��� ������?\n"
-"������ �� �� �� ����� ��������� ��� �������, ��� ���� ������ ������� �����."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "���������� �����"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "�������� ������"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"������ ������� ������ ������ �� ����� %s.\n"
-"������ �� � ������� ``���=�������� ���2=��������2 ...''.\n"
-"�� ������, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "������ ������:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"�������� ������ %s ��������.\n"
-"�� �� ������ �������� ������ �� ������ ����������� ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "������� X ����������"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "������� rpm �������"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "������� \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "������� ���������������� ���������"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s ��� �������)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "��� ������� �� ������� ������"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "�������� ���������� ���"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "���������� ��� ���� �������� ���� ���� �����, �������, `-' � `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "��� ���������� ��� ��� �������"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "����� ���������"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"����� ���������\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "�������� ���������"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "����� ���"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:709
-#: ../../printerdrake.pm_.c:807
-msgid "User name"
-msgstr "���������� ���"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "����a"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "���� �����a�e"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ja ���� ������� ��� ������� �� ���������� �����je je���� ��������a.\n"
-"�� �� ������ �� ���������� ��� ������ ?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "��������� default (��������) ��������a:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "��������� window �������� ��j� ������ �� ���������:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "��������� ��j� j���� ������ �� ����������."
-
-#: ../../any.pm_.c:851
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "������ �������� ����� j���� ��j� �� ���� �������� ����� ���������je "
-
-#: ../../any.pm_.c:865 ../../install_steps_interactive.pm_.c:689
-#: ../../standalone/drakxtv_.c:78
-msgid "All"
-msgstr "��e"
-
-#: ../../any.pm_.c:957
-msgid "Allow all users"
-msgstr "������� ��� ���������"
-
-#: ../../any.pm_.c:957
-msgid "Custom"
-msgstr "����� �� �e��"
-
-#: ../../any.pm_.c:957
-msgid "No sharing"
-msgstr "���� ����������� ������"
-
-#: ../../any.pm_.c:967 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "����� %s ���� ���� ����������. �� �� ������ �� �� �����������?"
-
-#: ../../any.pm_.c:970
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "������ ������������ ��������� NFS ��� Samba-�. ���� �� ��� ��� ������"
-
-#: ../../any.pm_.c:978 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "������ ����� %s ���������"
-
-#: ../../any.pm_.c:984
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:998 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:564
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:702 ../../my_gtk.pm_.c:705 ../../my_gtk.pm_.c:1034
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1588
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2254
-#: ../../standalone/drakbackup_.c:2279 ../../standalone/drakbackup_.c:2300
-#: ../../standalone/drakbackup_.c:2321 ../../standalone/drakbackup_.c:2339
-#: ../../standalone/drakbackup_.c:2387 ../../standalone/drakbackup_.c:2407
-#: ../../standalone/drakbackup_.c:2426 ../../standalone/drakfloppy_.c:235
-#: ../../standalone/drakfloppy_.c:384 ../../standalone/drakfont_.c:768
-#: ../../standalone/drakgw_.c:598 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:527
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "�������"
-
-#: ../../any.pm_.c:998
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:1000
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1037
-msgid "Welcome To Crackers"
-msgstr "�������� ��� K�����a"
-
-#: ../../any.pm_.c:1038
-msgid "Poor"
-msgstr "�����"
-
-#: ../../any.pm_.c:1039 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "����������"
-
-#: ../../any.pm_.c:1040
-msgid "High"
-msgstr "������"
-
-#: ../../any.pm_.c:1041
-#, fuzzy
-msgid "Higher"
-msgstr "������"
-
-#: ../../any.pm_.c:1042
-msgid "Paranoid"
-msgstr "����������"
-
-#: ../../any.pm_.c:1045
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"�� ���� ����� ����� �������� �����. �� ����� ��� ������ ������\n"
-"�� ��������, ��� �  ����� ���������: �� ��� ���� �������� �� ������\n"
-"���� �� �������� �� ������ �������� ��� �� ��������. ���� �� �������\n"
-"������� �� ��������."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"������� �� ���� ���������, ��� �e � ���� �� ����������� �� �� �������\n"
-"��� ������ �������."
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"��� �� ���������� ���������� �������� ����������� �� ��������\n"
-"��j�  �� ����  �������� �� ���� �� ���������� ��� ��� �������.\n"
-"�e ������� ���������� �������."
-
-#: ../../any.pm_.c:1050
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1051
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"�� ���� ����������� ������, ��������� ���� ������� ��� �������\n"
-"������� ������. ��������� �� ���� ������� ������ �� ���������\n"
-"������ �� ������ ���� �������� ��������� ������� ���������."
-
-#: ../../any.pm_.c:1054
-#, fuzzy
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"���������� ���� 4 ������, ��� �� ���� ������ ������� ��������.\n"
-"���������� ������ �� ����������."
-
-#: ../../any.pm_.c:1059
-msgid "Please choose the desired security level."
-msgstr "��������� ���������� ����"
-
-#: ../../any.pm_.c:1062
-msgid "Security level"
-msgstr "���������� ����"
-
-#: ../../any.pm_.c:1064
-msgid "Use libsafe for servers"
-msgstr "������� libsafe �� �������"
-
-#: ../../any.pm_.c:1065
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "���������� ���� ����� �� buffer overflow-� � format string ������."
-
-#: ../../any.pm_.c:1067
-msgid "Security user (login or email)"
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:354
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Dobrodosli u %s, menadzer z� startanje operativnih sistema !\n"
-"\n"
-"Izaberite operativni sistem, ili\n"
-"sacekate %d sekundi za startanje pretpostavljenog OS.\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:910
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobrodosli u GRUB  starter operativnog sistema !"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:913
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Koristi  %c i %c slova da bi oznacili izbor"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:916
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite enter za podizanje izabranog OS,'e' za promenu "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:919
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandi pri  podizanju sistema,ili  'c' za komandnu liniju "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:922
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Oznaceni izbor se podize automatski za %d sekundi"
-
-#: ../../bootloader.pm_.c:926
-msgid "not enough room in /boot"
-msgstr "���� ������� ����� � /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1026
-msgid "Desktop"
-msgstr "�������"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1028
-msgid "Start Menu"
-msgstr "����� ���� "
-
-#: ../../bootloader.pm_.c:1047
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "�� ������ �� ����������� ������� �� ��������� %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "����� j�� ��j� ��������������.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "K�����������a ����� �����a�a"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/drakfloppy_.c:82
-#: ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_��j�"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/��j�/_���j"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle ������� �� ������������j�"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle �������"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "������������� �������"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "������������� Gtk+ �������"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "������� ������ ��� �����a�e"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grub ���"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot ���"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"�������� ��������� %s ��� Boot ������� \n"
-"�������� �� ������ (Configure) �� �� ��������� ���e��������."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1457
-#: ../../standalone/drakbackup_.c:1468 ../../standalone/drakgw_.c:592
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "������"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "��������� ���"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the graphical environment when your system starts"
-msgstr "������� X-Window ������ ��� �����a��"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "��, ja �� ����� ���������a�e"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "��, j� ����� ���������a�e �� ����(��������,�������)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2431 ../../standalone/drakbackup_.c:3335
-#: ../../standalone/drakfloppy_.c:377 ../../standalone/drakfont_.c:537
-#: ../../standalone/drakfont_.c:658 ../../standalone/drakfont_.c:721
-#: ../../standalone/drakfont_.c:766 ../../standalone/draknet_.c:109
-#: ../../standalone/draknet_.c:141 ../../standalone/draknet_.c:297
-#: ../../standalone/draknet_.c:436 ../../standalone/draknet_.c:522
-#: ../../standalone/draknet_.c:565 ../../standalone/draknet_.c:666
-#: ../../standalone/logdrake_.c:520
-msgid "OK"
-msgstr "�K"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "�� ���� �������� /etc/inittab �� ���a�e: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d �����a"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 �����"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d �������"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "�� ���� �� �������� ������ ��� ��������������"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "������ �� ���� �������� ����� ����������� � %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../network/tools.pm_.c:113
-msgid "France"
-msgstr "��������a"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "���������"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27 ../../network/tools.pm_.c:116
-msgid "Belgium"
-msgstr "�������"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "�����"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "������a"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "�����"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "��������"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "�������"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34 ../../network/tools.pm_.c:114
-msgid "Netherlands"
-msgstr "���������"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../network/tools.pm_.c:115
-#: ../../standalone/drakxtv_.c:74
-msgid "Italy"
-msgstr "�������"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "��������"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67 ../../network/tools.pm_.c:117
-msgid "United States"
-msgstr "���"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "����� ���, ���� ��������� ������ ����� ��������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:899
-#: ../../diskdrake/interactive.pm_.c:908 ../../diskdrake/interactive.pm_.c:962
-msgid "Read carefully!"
-msgstr "������� ���Ǹ°� !"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"������� ��������� �� ���������  aboot, �������e ������ ������� (2048 "
-"��������� ������� \n"
-"�����)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "�������� (��������)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "��������� ������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"���� ������ ����� ������ FAT ���������\n"
-"(�������� �� ������� MicroSoft Dos/Windows-�, �� ������).\n"
-"��������� �� ���� �������� ������� (resize) �� ��������� (�������� �� ��,\n"
-"� ����� �� \"������� ��������\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "�������� �� ���������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1058
-msgid "Empty"
-msgstr "������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:933
-msgid "Other"
-msgstr "�����"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "����� ���� �������:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "�������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "���"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "������ ���� �������� ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "������"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "���� ������� ``����������''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"����� ������� ���� �������je %s, ��� ������ �� ���� ��������� �� ���� "
-"���������"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "��������� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "��������� ����� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "�����"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "����� �� ������� ���"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "����� �� �������� ���"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "������� �����"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "�������� ��������� ?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "���� ��� ������� �������"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "���� ��� ������� ������� � ������ ���������?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "�� �� ������ �� �������� ������ � /etc/fstab?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "���� �����������"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "������ ���"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "����������� � ���� �����"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "��� �������� ��������� �� �������"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "�� ���� ������ ���� �� ����� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"�� �� ��������� �������� ��� (extended) ��������� ��������� ����� �� "
-"����������"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "������� ������ ���������"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "������ ������ ���������"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "����� ������ ���������"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "������ ������ ������ ���������"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "������������� ���������� ������"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "��������� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"����a���a(��������) ������ ��������� ���� ���� ��������\n"
-"������ �� ��������� ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "���������"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"������� ������� � ������\n"
-"��� ������ �� ������� �� ���� ��������� !"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "��������� ������ ���������"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "������� �����������"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:535
-#: ../../diskdrake/interactive.pm_.c:562 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "����� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "����je"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:629
-msgid "Resize"
-msgstr "������� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:682
-msgid "Move"
-msgstr "��������"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "�����������"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "��������"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "����� �� RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "����� �� LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "����������"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "������ �� RAID-�"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "������ �� LVM-�"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "������� RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "������� �� loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "������� ���� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "������� ������: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:781
-msgid "Size in MB: "
-msgstr "�������� � MB:"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:782
-msgid "Filesystem type: "
-msgstr "����� �����e���g �������:"
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1042
-#: ../../diskdrake/interactive.pm_.c:1116
-msgid "Mount point: "
-msgstr "����� ���������: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "��������������: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "������ loopback ���� ?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "������� ���� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "����  ��������� ������ ������ ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "����� ext2 �� ext3"
-
-#: ../../diskdrake/interactive.pm_.c:533
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "��� ����� �� ��������� loopback ��������  %s?"
-
-#: ../../diskdrake/interactive.pm_.c:534 ../../diskdrake/interactive.pm_.c:561
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "��� ����� �� ��������� %s ������ ?"
-
-#: ../../diskdrake/interactive.pm_.c:540
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"��������a�e ��j� ������,j�� �� �������j� �������� �� loop back.\n"
-"���� �������� loopback"
-
-#: ../../diskdrake/interactive.pm_.c:585
-msgid "Computing FAT filesystem bounds"
-msgstr "������������ ������� FAT �����e���� �������"
-
-#: ../../diskdrake/interactive.pm_.c:585 ../../diskdrake/interactive.pm_.c:644
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "������� �������� (resizing)"
-
-#: ../../diskdrake/interactive.pm_.c:617
-msgid "This partition is not resizeable"
-msgstr "���j ��������� ��j� �����e ��������� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "All data on this partition should be backed-up"
-msgstr "C�� ������ �� ���� ��������� �� ������� ���� �a������"
-
-#: ../../diskdrake/interactive.pm_.c:624
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "����� ������� �������e %s �������j� ��� ������ �� ���� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:629
-msgid "Choose the new size"
-msgstr "��������� ���� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:630
-msgid "New size in MB: "
-msgstr "���� �������� � MB:"
-
-#: ../../diskdrake/interactive.pm_.c:683
-msgid "Which disk do you want to move it to?"
-msgstr "���� ���� ������ �� ����������?"
-
-#: ../../diskdrake/interactive.pm_.c:684
-msgid "Sector"
-msgstr "������"
-
-#: ../../diskdrake/interactive.pm_.c:685
-msgid "Which sector do you want to move it to?"
-msgstr "��� �����e �� ����������� �������?"
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving"
-msgstr "����������"
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving partition..."
-msgstr "���������� ���������..."
-
-#: ../../diskdrake/interactive.pm_.c:705
-msgid "Choose an existing RAID to add to"
-msgstr "������� ��������� RAID �� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:706 ../../diskdrake/interactive.pm_.c:724
-msgid "new"
-msgstr "����"
-
-#: ../../diskdrake/interactive.pm_.c:722
-msgid "Choose an existing LVM to add to"
-msgstr "������� ��������� LVM �� ��������"
-
-#: ../../diskdrake/interactive.pm_.c:727
-msgid "LVM name?"
-msgstr "LVM ���?"
-
-#: ../../diskdrake/interactive.pm_.c:767
-msgid "This partition can't be used for loopback"
-msgstr "��� ��������� �� ���� ���� ��������� �� loopback "
-
-#: ../../diskdrake/interactive.pm_.c:779
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "Loopback file name: "
-msgstr "��� Loopback �������e: "
-
-#: ../../diskdrake/interactive.pm_.c:785
-msgid "Give a file name"
-msgstr "�������� ��� �����"
-
-#: ../../diskdrake/interactive.pm_.c:788
-msgid "File already used by another loopback, choose another one"
-msgstr "��j� �� ��� ������� �� ������ ������ loopback-�,��������� �����"
-
-#: ../../diskdrake/interactive.pm_.c:789
-msgid "File already exists. Use it?"
-msgstr "�������a ��� �������.�� �� �� �� �������� ?"
-
-#: ../../diskdrake/interactive.pm_.c:812
-msgid "Mount options"
-msgstr "������ ���������"
-
-#: ../../diskdrake/interactive.pm_.c:819
-msgid "Various"
-msgstr "�����"
-
-#: ../../diskdrake/interactive.pm_.c:882 ../../standalone/drakfloppy_.c:104
-msgid "device"
-msgstr "��e��j"
-
-#: ../../diskdrake/interactive.pm_.c:883
-msgid "level"
-msgstr "����"
-
-#: ../../diskdrake/interactive.pm_.c:884
-msgid "chunk size"
-msgstr "chunk ��������"
-
-#: ../../diskdrake/interactive.pm_.c:899
-msgid "Be careful: this operation is dangerous."
-msgstr "�������,��� ��������� j� ������."
-
-#: ../../diskdrake/interactive.pm_.c:914
-msgid "What type of partitioning?"
-msgstr "���� ����� �����������a�a?"
-
-#: ../../diskdrake/interactive.pm_.c:932
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"���� ������ �������� /boot �� ���� �� ���� ����� (�� �������� > 1024).\n"
-"��� ��������� LILO ���� �� ����, ��� �� �� ��������� �� ��� �� ����� /boot"
-
-#: ../../diskdrake/interactive.pm_.c:936
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"��������� ���� ��� �������� �� root (/) �� ������� �������� �����\n"
-"1024-��� �������� ���� �����,� ������ /boot ���������.\n"
-"������� ��������� �� ���������� LILO boot ��������, ������\n"
-"������ /boot ���������."
-
-#: ../../diskdrake/interactive.pm_.c:942
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"�������� ��� ���������� RAID �������j� ��� root (/).\n"
-"��j���� ������� �� ���� �� ���� �� ��� ��� /boot �������je.\n"
-"���� ������ �a ������ /boot �������j�"
-
-#: ../../diskdrake/interactive.pm_.c:962
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "������ ��������� �� ������ %s �� ���� �������� �� ����!"
-
-#: ../../diskdrake/interactive.pm_.c:966
-msgid "You'll need to reboot before the modification can take place"
-msgstr "������ ������������ ������� �� �� �� ������ ��������"
-
-#: ../../diskdrake/interactive.pm_.c:977
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"����� ��������a�a �������je %s,��� ������ �� ���� ��������� �� ���� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:979
-msgid "Formatting"
-msgstr "�����������"
-
-#: ../../diskdrake/interactive.pm_.c:980
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "����������� loopback �������e %s"
-
-#: ../../diskdrake/interactive.pm_.c:981
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "����������� ��������� %s"
-
-#: ../../diskdrake/interactive.pm_.c:992
-msgid "Hide files"
-msgstr "������ �������"
-
-#: ../../diskdrake/interactive.pm_.c:992
-msgid "Move files to the new partition"
-msgstr "�������� ������� �� ���� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:993
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"������������ %s ��� ������ ���� �������\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-msgid "Moving files to the new partition"
-msgstr "���������� ������� �� ���� ���������"
-
-#: ../../diskdrake/interactive.pm_.c:1008
-#, c-format
-msgid "Copying %s"
-msgstr "�������� %s"
-
-#: ../../diskdrake/interactive.pm_.c:1012
-#, c-format
-msgid "Removing %s"
-msgstr "��������: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1022
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "��������� %s �� ���� ������� ��� %s"
-
-#: ../../diskdrake/interactive.pm_.c:1043
-#: ../../diskdrake/interactive.pm_.c:1102
-msgid "Device: "
-msgstr "������: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "������ DOS ���������: %s (���� ������������)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1056
-#: ../../diskdrake/interactive.pm_.c:1120
-msgid "Type: "
-msgstr "�����: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-msgid "Name: "
-msgstr "���: "
-
-#: ../../diskdrake/interactive.pm_.c:1060
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "�������: ������ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "Size: %s"
-msgstr "��������: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s �������"
-
-#: ../../diskdrake/interactive.pm_.c:1065
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "�������� %d �� �������� %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-msgid "Formatted\n"
-msgstr "�����������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-msgid "Not formatted\n"
-msgstr "���� �����������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-msgid "Mounted\n"
-msgstr "���������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1069
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1071
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback ��j�(���): \n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1072
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Boot ��������� �� default-�\n"
-"   (�� �������� MS-DOS�, �� �� lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1074
-#, c-format
-msgid "Level %s\n"
-msgstr "���� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1075
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Chunk-�� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-������� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1078
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "��e Loopback �������e: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1081
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"��j���������j� je, �� j� ��� �������ja\n"
-"Driver �������ja, �� ���� �������\n"
-"�� j� �����e.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1084
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"��� j� �����j���� Bootstrap\n"
-"�������j� � ������� �e\n"
-"dual-booting �a��� ������a.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1103
-#, c-format
-msgid "Size: %s\n"
-msgstr "��������: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1104
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "����������: %s ���������, %s �����, %s �������\n"
-
-#: ../../diskdrake/interactive.pm_.c:1105
-msgid "Info: "
-msgstr "����: "
-
-#: ../../diskdrake/interactive.pm_.c:1106
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-������� %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1107
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "��� �����e ��������� : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1108
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "�� ���� %d ID %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1122
-#, c-format
-msgid "Options: %s"
-msgstr "����je: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Filesystem encryption key"
-msgstr "���� �� ���������� ���� �������"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Choose your filesystem encryption key"
-msgstr "��������� ���� �� ���������� ���� �������"
-
-#: ../../diskdrake/interactive.pm_.c:1142
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"��� �������(����������� ����) j� �����e j���������a (����� �a ��� ��� %d "
-"�������)"
-
-#: ../../diskdrake/interactive.pm_.c:1143
-msgid "The encryption keys do not match"
-msgstr "������������� ������������ ������� (�������)"
-
-#: ../../diskdrake/interactive.pm_.c:1146
-msgid "Encryption key"
-msgstr "���� �� ����������"
-
-#: ../../diskdrake/interactive.pm_.c:1147
-msgid "Encryption key (again)"
-msgstr "���� �� ���������� (������)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "������� ����"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a medium"
-msgstr "�������� �� �����"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS ������"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s �����������  %s ���� ������"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "�� ���� ���� �� ���������� %s � ���� %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck ������� ���� ������ �� ����� %d ��� �������� %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "������ ��� ����������� %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "j����������"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "������"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "�e ������ ��������� JFS �� �������j� ���� �� 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "�e ������ ��������� ReiserFS �� �������j� ���� �� 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "����� ��������� ������ �� ������ �� ������� /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "��� ������� ��������� �� ������ ��������� %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "�� ������ ��������� ������� LVM �������j� �� �a��� ������a�� %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "���j ���������j�� ����� �� ������ � root-�  �����e���� ������a"
-
-#: ../../fsedit.pm_.c:486
-#, fuzzy
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"�������� ��� j� ����� �����e��� ������ (ext2, reiserfs) �� ��� �a��� "
-"��������a\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "�� ������ ��������� ������������ ���� ������ �� �a��� ������a�� %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "���� ������� ��������� �������� �� ����-������a��"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "���� ��� �� �� �����"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "������ ��� �������� %s �� �����: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"�������� �� ������ - ���� ����� �������� ������ �� ����� �� ���� ������� "
-"���� �����e���� �������. ��������� ��� ������� �� ������ ��� �� ����� ���� "
-"��������."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "������ ������� ���������!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux �� �������������� ������, � �� ����� �� ����� �������� ���� ����� "
-"���������\n"
-"��������, ��������� �������, ���. ������ ��������� ``������� �� ���������''\n"
-"�� �� ������� ���� � ����. ��� �� ������� �� \"root\", ���� �� ������� "
-"�������������, ���������\n"
-"���� ������ ���� ���� ���� �� ������ ���� ��� ���� �������\n"
-"������� � ������ �������������. ������� �� �� �������� ������� ������\n"
-"������� ��������� �� ����. ��� ����� �� ���� �� ���� ����� �� �� �������� \n"
-"�� �������� ���������. ���� �� ����� ��������� �� �� ��������� ��� \"root\" "
-"����� ���,\n"
-"�� ���� ���� ����� ������! � ������� ������ ���� ������� �� ��� ������\n"
-"���� ���� ������. ������� ��������� ������� ������ ��� ������ �������� \n"
-"������ ������ ��������� ����� �����������, ��� �� � ���� ������.\n"
-"\n"
-"����, ������ �� ������� ���� ����� ���. ��� ���� ���������, ������� -\n"
-"��� ������ ���������� � �������� �� ���� ��� ������. DrakX �� ���� ����� "
-"����\n"
-"��� ���� ��� ����� � ������� �� � ������� �� ������� ����� ��������� \"User\n"
-"name\". ��� �� ��� ���� �������� �������� ����� �� ������� ��� �������� ��\n"
-"������. ������ �� ���������. Y����� ���� ������ ����� ������� ����.\n"
-"������, ��-������������� ���������� ������� ���� �� ����� ������� ��� ��� "
-"��\n"
-"\"root\" ���������� �� ���������� ����� �������, ��� �� ���� ������ �� "
-"��������\n"
-"- ����� �����, ���� ������� �� � ������.\n"
-"\n"
-"������� �������� �� �������� ��������� \"Accept user\", ������ ������ ��� "
-"���������. �������\n"
-"��������� �� ������ ����� ���������: �� ����� ��� ��� ������, ��\n"
-"������. ���� ������� �������� ���� ������� ���������, ��������� ������� "
-"\"Done\".\n"
-"\n"
-"������ �� ������ �������� \"Advanced\" ������ �������� default \"shell\"\n"
-"�� ��������� ��������� (bash �� default)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"����� �� ������ ����� �����je��� Linux �������ja ��j� �� ����������e\n"
-"�� ���� �����. ������ �������� ����� ��j� j� �������� ��������, j�� j� ����� "
-"�a a\n"
-"����� ��������. ������� ��������� �����, ������ ��� �������� root\n"
-"�������j� (\"/\"). ����j�� �� ������ ������ ���� �������j� j�� �e���� ���� "
-"�a\n"
-"����������� ������ �������a. ������� ������ �� ������� ������a�� �� ������� "
-"�������j� ,\n"
-"������ �� ���������� � \"/home\" (������ j� ������� ����� ���� �� j����\n"
-"Linux �������je).\n"
-"\n"
-"\n"
-"���������j�: ����� �������j� j� ��������a �� ����e�� �a���: \"��e\", "
-"\"���������\".\n"
-"\n"
-"\n"
-"\"���\" je �������� �� ����e�� �a���: \"��� ���� ����a\", \"���j ���� ����a"
-"\",\n"
-"\"���j �������je\" (�� ������, \"hda1\").\n"
-"\n"
-"\n"
-"\"��� ���� ����a\" je \"hd\" ������� j� ���� ���� IDE ������ �  \"sd\"\n"
-"������� je SCSI ���� ����.\n"
-"\n"
-"\n"
-"\"���j ���� �����\" j� ���� ����� ����� \"hd\" ��� \"sd\". �� IDE ���� "
-"�������:\n"
-"\n"
-"   * \"a\" ��a��  \"master ���� ���� �� ���������  IDE ����������\",\n"
-"\n"
-"   * \"b\" ��a�� \"slave ���� ���� �� ��������� IDE �����������\",\n"
-"\n"
-"   * \"c\" ��a�� \"master ���� ���� �� ����������� IDE �����������\",\n"
-"\n"
-"   * \"d\" ��a�� \"slave ���� ���� �� ����������� IDE ����������\".\n"
-"\n"
-"\n"
-"�� SCSI ���� ��������a, a \"a\" ��a�� \"�������� ���� ����\", a \"b\" ��a�� "
-"\"���������� ���� ���� \", ���..."
-
-#: ../../help.pm_.c:72
-#, fuzzy
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux ����������� �� ������ �� �������� ������� ����� CDROM-���. "
-"DrakX\n"
-"��� ������� �� ������� �� ���������� ����� ������� �� ������ CDROM-� � "
-"��������\n"
-"c��������  CD �� ������� �� ��� �� ������� ������������."
-
-#: ../../help.pm_.c:77
-#, fuzzy
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"���� �� ����� �� �������� ���� �������� ������ �� ����������� �� ���\n"
-"������. ������� ������ ������ ��������� �� ����������� �� Mandrake Linux, "
-"� \n"
-"�������������� �� �� ������ �� �� ��� ���������, �������.\n"
-"\n"
-"������� �������� ���������� ����������� �� CDROM-�, ���� ���� ����\n"
-"������� �� �� ������������� ���� CD-��� ����� (���� � Expert ����). "
-"���������\n"
-"������ �� CD-����� � �������� ��� ���� ����������\n"
-"�� �����������. �������� �� � ���� \"OK\" ���� ��� ������� �� ���������.\n"
-"\n"
-"������ �� ��������� � ����� � ������ �� ������������ �������� �� �����\n"
-"������. ���� ����� �� ��������� � ������ �������:\n"
-"\n"
-" * \"����� �������\": ������� ��������� �� ��������� ���� ������ ��� ����� "
-"�������, ���������\n"
-"����� ��� ���� ������������� �����.\n"
-"\n"
-" * \"������\": ������� ������ ����� �� �� ������� �� ������������, ��������� "
-"������(�)\n"
-"�����(�).\n"
-"\n"
-" * \"������\": ������� �� �� ������ ��������� ��� ������, ���� ���� �� \n"
-"��������� ���� �� ��������� ������������� �� ����������� ��\n"
-"������.\n"
-"\n"
-" * \"�������� ��������\": �� �����, ���� ���� �������� ����\n"
-"������� �������� ��������. ������ �������� ��� ����� �� �� �����\n"
-"�������� ����� �������!\n"
-"\n"
-"�������� ������� ���� ����� ����� ����� �������� ������ ���������\n"
-"� ��� �����. ������� �� ����������� �� ����� ����� ���� ��������\n"
-"������� ����������� (�� ������� �� ���������), �������� �� �������\n"
-"�� ���������� ���������� �� ��������� ����������:\n"
-"\n"
-" * ����������� �������� �������� �� ��� Linux �������,\n"
-"������� ���� � ��������� ������.\n"
-"\n"
-" * ��������� ������� ������ ���� ������� �����\n"
-"\n"
-" * ��������� �������� ������ ���� ��������� ��������\n"
-"\n"
-"������ ����������� � ����������� ������ ������ \"Individual package selection"
-"\", ���� �� ������� �������\n"
-"�� ��� ������� �������� ������ � ������ �� ����� ������� \n"
-"�������� ��� ���� ��� �� ���� �����������.\n"
-"\n"
-"������� ��� ��������� ��������� ��� \"Upgrade\" ���, ������ ������������� "
-"���\n"
-"����� �� �� ������� ����������� ���� ��� ����� ������. ��� �� ������� �� "
-"���������� ���\n"
-"��������� ���������� �������."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"�� �����, � ���������� �� ����� ������ �� �� ������ ����������� ������\n"
-"��� ��, ���� ��� ��������� ������ �� ���� �������� ��������������\n"
-"�� ������� � ����������. ��� ������������ ������, ������ ����������� ����\n"
-"�����, ��������, ��� ������������ ������.\n"
-"\n"
-"���� ��� ����������� ����� �� ������, ���� �� ��������� �� �����\n"
-"������. ���� �� ���� ��������� ��������, �������� �� ����������� \"Install\" "
-"������ ����\n"
-"�� �������� ������������ ������. � ���������� ������ �����\n"
-"�������� � ����� ������ ���� ����� �� �� �����������, ����������� ����\n"
-"� ���������. ��������� ����� �� ��������� ����������� �� ���������\n"
-"�� ������ �� �� ��� ������� �� ����� ������� ����������� �� �������� ���� "
-"���� ���\n"
-"����.\n"
-"\n"
-"!! ������� �� ������ ����� ������� �������� ��� ��� ���\n"
-"���� �����, ������ ������� �� �� ������ ������ �� �����������\n"
-"�������� �������. ��� Mandrake Linux-��, ��� �����������\n"
-"������� �� �������� �� default-� �� ����� �������� �������. ��� � ��� �� "
-"������� � ������\n"
-"�������� ������������ �������� �� ������� ������� ������������, ���� �� "
-"������\n"
-"�� ���������� ���� ���� �������� �������.\n"
-" ������� �� ����� ���� ����������� ������ ��� ����� �� ����\n"
-"��� ����� �� ���������, ���� �������� \"��\". ������ �� \"��\" ����\n"
-"����������� ��������� ������ � ��� �� ���� ��������� ���������� ��\n"
-"default-�. !!\n"
-"\n"
-"������ ���������� ���������� ��� \"Automatic dependencies\" ����������� "
-"��������� ������� �� ����������\n"
-"���� �� ����� ����� ��� ���� ������� ���������� ��������� ������. ��� ��\n"
-"����� ���� ��� �� �������� �� ���� �� �������� ���������� �� ������\n"
-"������� �� �� ������� ������� �����������.\n"
-"\n"
-"���� ������� ����� ����� �� ��� ����� ��� ��������� �� �������\n"
-"����� ������ ������ ����� ��������� �����������. ������ �� ��� �������\n"
-"�� �� ��� ���� ������� �� ������� ������� �������� ������ �� ����� \n"
-"��������� �����������. ���������� �������� ����� (�����) �� �� ������� ���� "
-"�� �������� \n"
-"����� �������."
-
-#: ../../help.pm_.c:164
-#, fuzzy
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"������� ������ �� �������� ��� ������� �� �������� ��� �� ������� �����,\n"
-"��������� �������� ������. �������� ���� ������� ��� ������\n"
-"������ �� �� DrakX ����� �� �� ��������� ����������.\n"
-"\n"
-"Mandrake Linux ���� ���������� Internet ��������� �\n"
-"���� �����������. ������ ��������� ��: ������������� �����, ISDN\n"
-"�����, ADSL ���������, ��������� �����, � �� ����� ����������� LAN "
-"���������\n"
-"(Ethernet).\n"
-"\n"
-"���� ������ ������� ��������� ����� �������������. ����������� ��������� �� "
-"�� �����\n"
-"��� ��������� �� ����� �������� ���������� ��� ����������\n"
-"��������������.\n"
-"\n"
-"������ ������������ � ��� ������� � �������� ����������� �� ������\n"
-"� �������������, ��� ����������� ��������� �� ��� �� ������ ��������� �\n"
-"���� ��������� ������� ���� �� ���� ������ �� ���������� ���� ���������.\n"
-"\n"
-"������� ������ �� ����� ����� ����������� ��� ��� ��������\n"
-"������������� ������ ���������, �������� �� ������� ��� \"Cancel\"."
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"���� ������ �������� ��je ������e ������ �� �� ������j� ��� �����a�� "
-"������a.\n"
-"\n"
-"���� �� ��������� ��� �������� ������� �� ���������\n"
-"�����������. ����������� �� ������� � ������������ ��� ���� ��� ���� ���� "
-"����\n"
-"�������� ��� �������� �������.\n"
-"\n"
-"������ ������ � ������ ��������� � ������� ������������\n"
-"��������� �������. �������, ������� ����� ������� ���� �� ������� ���� ���\n"
-"���� �������, ��������� �� �������� �� ������������.\n"
-"\n"
-"�� ���� �����, ������ ����� ������� ������� ������ �� ���������  ���� ������ "
-"���\n"
-"������: ��������� ������ ������ �� ���������� ������� ������ ���� ��� ����\n"
-"�������. ��������� �� �������� ������� ���� ���� ������ �������\n"
-"�� ��������� �� �������. �������� ��������, ��������� ���� ������� ���� ���� "
-"������ �������."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (���������� �� X Window ������) �� ���� GNU/Linux ��������� ����������\n"
-"�� ���� �� ��� �������� �������� (KDE, Gnome, AfterStep,\n"
-"WindowMaker, etc.) ��������. � ���� ����, DrakX\n"
-"�� �������� �� ���������� ������ X-���.\n"
-"\n"
-"������ �� ����� ������ �� ������, ���� ������� ������ ���� ����� ���� (���\n"
-"����� ���). ������� ����, �� �� ���������� ��������� X-��� �� ��������\n"
-"������� ����������� � ���������� �� �������� ��������. �������� �� ������\n"
-"�� ������� �� �� �� ������.\n"
-"\n"
-"������� �������� \"�������\" �����������, ����������� ��������� �� X\n"
-"�������������. ���������� ������������ ��� ������� �� ���� �����������\n"
-"� ���� ���������.\n"
-"\n"
-"������� ������ ������������ ������ � ���������� �� \"��\", ���� �� DrakX "
-"��������� ��\n"
-"�������� �������. ������� �� ������ �� ������ ������, �� ����������� �����\n"
-"�� �� ������������� �������� � �� �� �� ���� ��� �������� �����\n"
-"10 �������, ������������ �����."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"��� �� ���� ��� ������ ��������� X ������������, ����� ������ ���� ��� "
-"���������\n"
-"�� �������� (����� �� �������� ����, ������� ����� ��� ������...). ������,\n"
-"��� � ��� �� X ������� ��������, DrakX �� ��� ������� �� �� ��� "
-"�������������\n"
-"��������. ������ �� ���������� ������ � ������� � ���� �����\n"
-"������� ������ ������� �� ��� �� ��������� �����.\n"
-"\n"
-"��� �������� ������, ��� ��� ���� �� ������ �� ��������� X-���, ��������� "
-"\"Change\n"
-"graphics card\", ��������� \"Unlisted card\", � ���� ��� ����� ����\n"
-"������ ������, ��������� \"FBDev\". ��� �� ���������� ������ ���� ����\n"
-"�� ���� ����� ���������� ��������� ��������. ���� ��������� \"Test again\" "
-"�� �� ���� �������."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"�� �����, ������ ������� �� �� ������ �������� ���������\n"
-"��� �������� �������. ��� ������ �� ��� ���� ���������� ��� � ��� ����� "
-"���������\n"
-"�������������. �������, ������������ \"��\" ������� ���� ������ ���������\n"
-"������, ��� ������� ����� ������� ��������\n"
-"�������ed."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CDROM ��� ������� ���������� ���. ������ �� ����������\n"
-"�������� ������� ����� CDROM-�, ���������� >>F1<< ������ ��� �������� � "
-"�������� >>rescue<< �\n"
-"�������. ������� �� ������ �� �������� �� CDROM-�, �������\n"
-"�� �� �� �������  �� ��� ������ � ������� ��� ���������:\n"
-"\n"
-" * ���� ����������� �������, DrakX �� ��������� ������� boot ������� (MBR)\n"
-"����� �������� ����� (���� ������� �� ��������� ���� ����� �������) �� �� "
-"����� \n"
-"�� ��������� ��� Windows ��� GNU/Linux (���������������� �� ����� ��������� "
-"Windows ��\n"
-"����� �������). ������� ����� �� ������������� Windows,  Microsoft-�� "
-"������������\n"
-"������ �� ���� ��������� boot ������, �� ��� ������ ���� � ����������\n"
-"�� ������� GNU/Linux!\n"
-"\n"
-" * ������� �� ������� ����� � �� ������ �� ��������� GNU/Linux �� ���� "
-"�����,\n"
-"���� ����� ���� �� ���� ���� ������ ����� �� �������� GNU/Linux-�. ��\n"
-"������ ����� ���� ���������� ����� �� ������ �������, ���� ��\n"
-"������ ����� �������� ��.��������, �������� ������ � ������, ��������\n"
-"�������, ��� ���� ��� ������ �������.\n"
-"\n"
-"���� �������� �� ���� �����, ������� �� �� ��� �� ������� ������ �������\n"
-"� ������. ����� �������  ���� ���� ������ ��� �� ������ ������� ���� ��� "
-"���� ���������\n"
-"���� ������� �� �� ����������� ��� �� DrakX ��� ������ �������\n"
-"���� �������."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"� ���� ��������, ������ �� ��������� ��� ���� �����������\n"
-"Mandrake Linux ���������� ������ �� �a� ���� ����. ������� j� ������ ���\n"
-"�����je�� ���������� ������ ������� ��� �����je�� ������� �� �����, ����� �a "
-"��\n"
-"�������������e. � ������, �����������a�� ���� ����a �� �����j� ��������\n"
-"�e�e�� �� �� ���������� ������� �� ���������j� �a� ���� Mandrake Linux "
-"������.\n"
-"\n"
-"����� �� ������ ������� �����������a�� ������ ����������,\n"
-"������������e ���� ���� �������� ������� �� ��������� ��������e.\n"
-"���j �������� ��j����������j� ���j ������. ��� �������, ��������j���������\n"
-"� �� �����e.\n"
-"\n"
-"\n"
-"������ �� ����� ��� �� �������� ��j�a�� ��� �������je. J���a j� �� ��� "
-"���������� ������ a����a\n"
-"j� �� ��������� ������j� (����� �� ������ � Swap).\n"
-"\n"
-"\n"
-"������� �� �������j� �e� �������� (�� ��������� ���������j� ����������e\n"
-"������ a����� �� �����������a�e), ������ �������� �� ��j� �� ��� "
-"���e����������� \n"
-"Linux ������.\n"
-"\n"
-"\n"
-"������� �������j� ���� ���������e, ������ �� �� �������e. \n"
-"�� �� �� �������, ������ �� ��������� ���� ���������� ��������. � ���������� "
-"�� �����������je\n"
-"���� ����a, �����j� �������� ����������:\n"
-"\n"
-"* ��������� �����je�� �������je: �������� j� ���������� j���� ��� ���� "
-"�����je���Linux �������j� �� �a��� ���� �����. �������\n"
-"  ������ �� �� ��������, ��������� ��� ����j�.\n"
-"\n"
-"\n"
-"* ����a�� ����� ����a: ������� ������ �� ��������� ��� ������� � ��� "
-"�������je ��j� �����j� �� �a��� ���� ����� � �������� �� �a���\n"
-"  ����� Mandrake Linux ��������, ������ �� ��������� ��� ���j�. ������ "
-"�a������� ���� ����j��, j�� �e���� ���� � ����������\n"
-"  �� ��������� ����� ��a�e ����� ������e.\n"
-"\n"
-"\n"
-"* ��������e �������� ������� �� Windows �������j�: ������� je Microsoft "
-"Windows���������� �� ���� ����� � �������\n"
-"  ��� �������, ������ �� �������� �������� ������� �� Linux. �� �� �� "
-"������� ������ ���������\n"
-"  Microsoft Windows �������j� � ������e (�������j \"����a�� ����� ����a\" "
-"��� \"E�������� ���\" �e�e�a) ��� �� ��������� �e������\n"
-"  Microsoft Windows �������je. ��j �������� �� ���e ������� ��� "
-"����e���������a. ��� �e�e�� �� ���������je\n"
-"  ������� ������ �� ��������� Mandrake Linux � Microsoft Windows �a����� "
-"����j�����.\n"
-"\n"
-"\n"
-"  ��� ���� ��������� ��� ����j�, ������ ����� �� �� ��������Microsoft\n"
-"  Windows �������j� ���� �a�� ���� ��� j� ���a. �� ��a�� ������ ��a�� �a�� "
-"�������� ���\n"
-"  Microsoft Windows-�� �� ������� ��� ���������j� ����� �������a.\n"
-"\n"
-"\n"
-"* E�������� ���: ������� ������ �� ����� �������������� ���� ����, �����e�� "
-"��������� ��� ����j�. ������ �a����� ��� ����\n"
-"  ��������� ��� ����j�. ��� j� ��� ����� ��� � ������ �����. �����e���� "
-"�������� ��� ������e. ����e,\n"
-"  ����j�� ������ ��� ����j� ������� �� ����� ��� ������."
-
-#: ../../help.pm_.c:347
-#, fuzzy
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"� ������ ���. ����������� �� ���� �������� � ��� GNU/Linux ������ �� \n"
-"������� �� ��������. ���� �������� �� � ���� ��� \"OK\" �� �� ������������ "
-"������. ������ ���������\n"
-"GNU/Linux ��� Windows, ��� ��� ���� ����������� (������� ����� ����������� "
-"��� �������), ���\n"
-"s�� ������� ������ �������.\n"
-"\n"
-"������ �������� \"Advanced\" (���� � ������� ����) ��������� ��� ��� ������� "
-"��:\n"
-"\n"
-" * \"�������� ����-������������ �������\": ���� �������� ������������� ����� "
-"�����\n"
-"���� �� ���������� ��������� ���� ����������� ��� ������ ���������\n"
-", ������ ���� ����������� ���� ��� ������ ������.\n"
-"\n"
-"   ������ ��������� �� �� ��� ��������� ������ �������� ����� �������� �� "
-"������:\n"
-"\n"
-"    * \"�� ����������\". ��� �� ����� �������������� ����������� ��� ����� "
-"��\n"
-"��������������� ����� ������ ������������ (���� ��).\n"
-"\n"
-"    * \"��������������\". ������� �������������� �����������: ���� ���� �� � "
-"����������\n"
-"�����������, � ��� ������ �� ���� ���������.\n"
-"\n"
-"   ��� ������ �� ����� ������� ������� �������� ������ ���� ������� "
-"�����������\n"
-"�� ����� ����� ������. ���������� ������� � ���� ����������� �� ����� web "
-"�����.\n"
-"\n"
-" * \"������� ��������� ������\"(*) : ����� ��������� ������ ���� ���\n"
-"��������� � ���� �����������. ����, �� ���� ������ �������� ����� "
-"�����������, ������� �������\n"
-"� ��������� ������� ����� ��������� ��\n"
-"[F1] ������, � �������� �� >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) ������ �� �����  FAT-����������� ������� (�� �� �� ����������� ��� GNU/"
-"Linux-��, ��������\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"����� �������j� ��j� j� �������������� ���a ����\n"
-"����������� �� ������� (��������a�� ����� �����a�� �����e����(��j�) "
-"������a).\n"
-"\n"
-"�a�� ����� ������ �� ������������� �����je�� �������je �� �� ���������\n"
-"������� ��j� ������. ������� ������ ��, ��������� �������j� \n"
-"��j� ������ �� ���������j��e.\n"
-"\n"
-"\n"
-"��������� �� ��j� �������� �� ������������� ��� �����je�� �������je.\n"
-"������ �� ������������� �������j� ��j� ������ ���������� ������ (��� ��� �� "
-"\"/\",\n"
-"\"/usr\" ���  \"/var\") ��� �� ������ �� ������������� �������j� ��j� ������ "
-"������e\n"
-"��j� ������ �� �������e (������ /home).\n"
-"\n"
-"\n"
-"������ ��� ���a�� �������ja, ����� ��������a�a, �� ������ �� \n"
-"���� ��������� � �e���� �� ���� ���������.\n"
-"\n"
-"\n"
-"�������� �� \"� ����\" ���� ������ ������ �� ��������a�� �������ja.\n"
-"\n"
-"\n"
-"�������� ��  \"�������\" ������� ������ �� ���������� ����� �������j� �� "
-"���������j� �����\n"
-"Mandrake Linux ����������� ������a. �������� �� \"��������\" ������� ������ "
-"�� ��������� ��������� ���� �� ���� ���������\n"
-"�� ����� ������� �� �����."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"�a� ���� Mandrake Linux ���������� ������ �� �������� ��������a.\n"
-"��� �������j� �� ������� �� �����j� �������� �����a (� ���������� �� "
-"�������e������ ��j� �� ���������j� � ������ �a��� ����j����a).\n"
-"\n"
-"����� ��� �� �����e�e.����a."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"��� ���� ��� ��������� ������� ���������� ������ �������. ���\n"
-"������� ���� Mandrake Linux ������������, � ������� �� �� �������\n"
-"�� ���� �������� ���� �� ������ � ���, �������� �� \"�������\" ������ ���� "
-"�� �����\n"
-"���������� �����������. �� �� ��������� �� ������������, �������� \n"
-"������ \"���������\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"�� ���� �����, ����� �� �� ��������� ������ ���� ���������� �� ����\n"
-"������. ���� ������� ������, ��� �� ������ ���� ��������, � ��� �� ����\n"
-"�������� ���� �� ������� ����������, ���� ���� � ���� ���� ����������.\n"
-"����, ���� ���� ���������� ��� �� ����� ������ �\n"
-"������ ��������. ���������� MSEC �������� � ``�������'' ��\n"
-"�� ������ ���� ����������� � ������� ���� �����.\n"
-"\n"
-"������� �� ����� ��� �� ���������, �������� �� default ������."
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"�� ���j �a���, ������ ������� ��j� �������j�(e) ������ �� ��������� ��\n"
-"���������j� ����� Mandrake Linux ������a. ������� �� �������je\n"
-"�e� ���������� (�� ��������� ���������j� ��� �� �����e\n"
-"������ ����� �� �������je), ������ �� ��������� �����je�� �������je. � "
-"������ �����j����a,\n"
-"���� ���� �������j� ����j� ���� ���������e.\n"
-"\n"
-"�� �� �������� �������j�, ������ ���� �������� ���� ����. ������ ��������\n"
-"���� �� �����������a�� ������ �� \"hda\" �� ���� IDE ����, \"hdb\" ��� \n"
-"�� ����� ��� \"sda\" �� ���� SCSI ���� ���.\n"
-"\n"
-"�� �����������a�� ������������ ���� �����, ������ ��������� ����e�� ����je:\n"
-"\n"
-"   * \"������ ���\": ��� ����j� ����� ��� �������j� �� ��������� ���� "
-"�����.\n"
-"\n"
-"   * \"Auto ������a�e\": ��� ����j� ��������� �� ���������� ��������  Ext2 � "
-"swap �������j� �� ��������� �������� \n"
-"     ���� ����a.\n"
-"\n"
-"   * \"����� ������ �������ja\": ������� je �a�� ������ �������j� ���e����, "
-"������ �� ������e �� j� ��������� ������e�� ��� ����j�. ������\n"
-"     �a����� � ���j�� �� ���� �� � �� ���e.\n"
-"\n"
-"   * \"����� �� �����\": ��� ����j� �� ��������� ������.\n"
-"\n"
-"   * \"������� ������a�e\": ��� ����j� ������ ��������� ������� ������ �� "
-"������������ ������e � ������� �����j���� ������ �������ja\n"
-"\n"
-"   * \"��������\": ������� ������ �� ��������� ��������a �� �����������a�e "
-"���� ����a, ��������e ��� ����j�. ����������a j� ������\n"
-"     ������ ����� ��a�� � ������j��a.\n"
-"\n"
-"   * \"������� �� ������e\": ������� ��� ������� ������ �������j� �� "
-"�������  ����� ��������� ���������je, ������ je\n"
-"     ������� �� ���� ����j��.\n"
-"\n"
-"   * \"����� �� �������\": ������� ������ �� �� ������� ������ �������ja �� "
-"������� �a �� ����� �����j� �� j� ��������e, ������ �� ����������e\n"
-"     ��� ����j�. �������� ���������j��� ��� ����j�\n"
-"\n"
-"   * \"��a����\": ���� �������� �� �����������a��� ���� �����, ����������� "
-"��� ����j� �� �� ������� ������e.\n"
-"\n"
-"�� ���� ���������ja, ������ �� ����� ����j�  ������ ����a��� ������ "
-"��������e: ��������j�� ���� �������j� ������ [Tab] ������a � [Up/Down] "
-"�������a.\n"
-"\n"
-"���� j� �������j� �������a, ������ ���������:\n"
-"\n"
-" * Ctrl-c �� �����a�� ���� �������je (���� j� �������� ������ �������ja);\n"
-"\n"
-" * Ctrl-d �� ����a�� �������je;\n"
-"\n"
-" * Ctrl-m �� �������a�� �a��� ������a�a.\n"
-"\n"
-"������� ������ ���������j� �a PPC �a����, ����� ���� ������ �� �������e "
-"����\n"
-"HFS 'bootstrap' �������j� �� ��j�a�� 1MB �� ��������\n"
-"yaboot �������a. ������� �� �������� �� ��� �������j� ��������� ���� �e���,\n"
-"�� ������ 50MB, ������ ����������� ��j ������� �� ��e��a��\n"
-"��������� ������� � ramdisk image �� �����a�� � ������ �������j��a."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"J���� ��� ���� �icrosoft Windows �������j� j� ����������� \n"
-"�� ���� �����. ��������� ��j� �� ��� ������ �� ��a���� �� �� �����������\n"
-"���� Mandrake Linux ���������� ������.\n"
-"\n"
-"����� �������j� j� �������� �� ����e�� �a���: \"��� Linux-a\",\"��e Windows-a"
-"\"\n"
-"\"���������\".\n"
-"\n"
-"\"��� Linux-a\" je �������� �� ����e�� �a���: \"��� ���� ����a\", \"���j "
-"���� ����a\",\n"
-"\"���j �������je\" (�� ������, \"hda1\").\n"
-"\n"
-"\"��� ���� ����a\" je \"hd\" ������� je ���� ���� ID ������ � \"sd\"\n"
-"������� j� SCSI ���� ����.\n"
-"\n"
-"\"���j ���� ����a\" je ���� ����� ����� \"hd\" ��� \"sd\". �a IDE ���� "
-"��������a:\n"
-"\n"
-" * \"a\" ��a��  \"master ���� ���� �� ���������  IDE ����������\",\n"
-"\n"
-" * \"b\" ��a�� \"slave ���� ���� �� ��������� IDE �����������\",\n"
-"\n"
-" * \"c\" ��a�� \"master ���� ���� �� ����������� IDE �����������\",\n"
-"\n"
-" * \"d\" ��a�� \"slave ���� ���� �� ����������� IDE ����������\".\n"
-"\n"
-"�� SCSI ���� ��������a, \"a\" ��a�� \"�������� ���� ����\", a \"b\" ��a�� "
-"\"���������� ���� ���� \", ���.\n"
-"\n"
-"\"��� Windows-a\" j� ����� ���� ����� ��� Windows-�� (���� ����\n"
-"��� �������ja �� ���� \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "������ ��������.���ja�� ���� ������j� ���� ���� �������� �����a"
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX ���� ����� �� ��� �� �� ������ �� ��������� default (\"�����������\")\n"
-"����������� ��� ������ �� ����� ���� �������� (\"�������\"). ������\n"
-"����� � ����� ������ ��������� ���� ����������� ��� ��������� ����������\n"
-"Mandrake Linux �������:\n"
-"\n"
-" * ��������� ������ ����� ������\n"
-"\n"
-" *\n"
-"\n"
-" *\n"
-"\n"
-"�� ����� ������, \"���������\" ��� ���������� ���������� ���������� "
-"�������.\n"
-"�������, ��������� \"��������� ������\" ������� ������ �� ���������\n"
-"������ �� ��������� �����������, ��� ������ ������.\n"
-"\n"
-"���������  \"���������ja\" ������� ���� ��������� �����j�Mandrake Linux\n"
-"��j� j� ����������� ��� ������ �� ��������� ���� ����������� ������a.\n"
-"\n"
-"��������e \"A�����a�e\" ������� ������ �� a�����a�� �����je�� �����j� "
-"Mandrake Linux-a.\n"
-"\n"
-"� ���������� �� �a��� ������a�� GNU/Linux-a, ������ �������� j���� �� "
-"����e��� ����� �� ���������j� ��� a�����a��\n"
-"Mandrake Linux ����������� ������a:\n"
-"\n"
-"* �����������: ������� ������� ����� �����������  GNU/Linux ���������� "
-"������ ��������� ���. ���������j� �� ����\n"
-"  ����� ���� � ��a���� �� ���������� �� ����� �������� ���a�a.\n"
-"\n"
-"* �������: ������� ����� ����� ��a�� � GNU/Linux-�, ������ �������� ��� "
-"������������ �����. ��� � \"�� ���e���a���\"\n"
-"������������j �����, ���� ���� �� ������ �������� ������ (����� �������, "
-"������, �����j�� ������a). ������ ����a\n"
-"�a����� ��� ������ ��� ������������ �����. ���� ���� �� �������� �����\n"
-"�������� ���������j�.\n"
-"�������� �� ���� ���a�� ���� ���� ����� �e��� ������� ������ ����� ��a�� �\n"
-"GNU/Linux-�. ����e, ����j�� ������ \n"
-"��� ������������ ���� ������� �� ����� ��� �����e."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"� ��������, DrakX ���� ����� ��������� �� ��� (� ���������� �� ���� ����\n"
-"��� ����� ��������) � ��� � ������ ������ ���� �����. ����, ����\n"
-"�� ������ �� ����� ������ ��������� ���� �������� ����� ������: ��\n"
-"������, ������� ��� ��������� ���� ������ ��������, ��������� ���� ������\n"
-"���������� ���������. ��� ������� �������� �������� ��� �� ��������\n"
-"� �������, ������ �� ���� � ����� ���������. � ���\n"
-"�������, �������� �� �� ������� �� ���� ������������ ����� � ���������\n"
-"������������ ��������� �� �����.\n"
-"\n"
-"�������� �� ������ \"���\" �� �� ������ ��������� �����\n"
-"��������� ���������."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"��������� ��� ����� �� ����������� � ��������� �������.\n"
-"\n"
-"������ �� ������ \"��������\" ����������� ���� �� ������ �����\n"
-"������ ���� ������ ����������� �� ���� ����� ��������. ������� ������ "
-"������\n"
-"���� ����������� ������� ������ (�� ������������� ������) �� ������������� "
-"�\n"
-"����������. �� ������, ������� �� �� ����� �������� ��������� ��������� �� "
-"�������\n"
-"��������� �������� ��� ������ � �� ������\n"
-"�������� � \"��������|�������\".\n"
-"\n"
-"��������� �� ������ ����������� ���� ������. ���� ��������� ��� ������\n"
-"������� ������������ �������� �� ������ \"� ����\" �� �� ���������."
-
-#: ../../help.pm_.c:609
-#, fuzzy
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"�� default-�, DrakX ������������ �� ����� ���� �� ��� ������� � ��������\n"
-"��������� ������ �������. DrakX �� ���������� ���������� �� �� �� ���� �\n"
-"PS/2, �������� ��� USB ����.\n"
-"\n"
-"������� ������ �� ������������� ����� ��� ���� ��������� ������������\n"
-"��� �� �����.\n"
-"\n"
-"������� �������� ���� ���� �� ��������� �� default-� �������� ��� ��\n"
-"���� �����. ��������� ������� � ������� �� �� ��������� �� �� �� ��������\n"
-"�����. ������� ��� �� ���� �������� ����������  ������ �� ������� (space "
-"bar) ���\n"
-"������ RETURN �� \"�������\" � ��������� ������."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"�����, ��������� ������������ ����. �� ������, COM1 ���� ��� MS Windows-��\n"
-" � Linux-� ��� ������ ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"��� �� �������������� ����� � ���������� � ���������� ����� GNU/Linux\n"
-"�������: ������ �� ������� \"root\" �������. \"root\" �� �������������\n"
-"������� � ������ �� �������� �� ���� ������, ������ ���������,\n"
-"���� ������� ������������� �������, ���. �������, \"root\" ����\n"
-"�� ����� ���! ���� ���� ������ �� ��������� ������� ���� ����� ���� �� ��\n"
-"������ - DrakX �� ��� ���� ������� �� ��� ������ �����������. ��� ��� ������ "
-"�� ������, ������ ��\n"
-"��������� � �� �� ������� �������, ��� ��� ������� ������������� �� ��\n"
-"�������� �� ������ �������: ������� �� ������� �� �� ��� ��� ���������� GNU/"
-"Linux ��\n"
-"���� ����� ���������� ������� ������� �� �������. ���� \"root\" ���� ��\n"
-"�������� ��� ���������� � ��������� ������� ��� ������� �� ���������\n"
-"���������� ���������, ����� �� �� �� �����\n"
-"������� \"root\".\n"
-"\n"
-"������� ����� �� ���� �������� ������� � ����� � ����� �� ������ ������� 8\n"
-"���������. ������ �� ��������� �� ����� \"root\" ������� - ���� ����\n"
-"������ �������� ������.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-
-#: ../../help.pm_.c:663
-#, fuzzy
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO � GRUB �� �������� (boot loaders) �� GNU/Linux. ���� ����� �� , "
-"�������,\n"
-"������� �������������. � ������, DrakX ��������� boot ������ ���� �����\n"
-"� ������� �� ������ ���� ��� �� ��������:\n"
-"\n"
-" * ������� �� �������� Windows boot ������, �� �� �� �������� �� GRUB/LILO "
-"boot\n"
-"��������. ������, ���� ���� �� ���������� ��� GNU/Linux ��� ���� ����� OS;\n"
-"\n"
-" * ������� �� �������� GRUB ��� LILO boot ������, �� �� �� �������� �� "
-"�����;\n"
-"\n"
-"������� �� � ������, DrakX �� ��������� ������� �� ���������� ��������.\n"
-"\n"
-" * \"�������� ��������\": ����� ��� ������:\n"
-"\n"
-"    * \"LILO �� ��������� �������\": ������� ���� ������ LILO �� ���������\n"
-"�����������.\n"
-"\n"
-"    * \"GRUB\": ������� ���� ������ GRUB (���������� ���).\n"
-"\n"
-"    * \"LILO �� ����������� �������\": ������� ���� ������ LILO �� "
-"����������� �����������.\n"
-"\n"
-" * \"Boot ������\": � ������ ���������, ������ ������ default\n"
-"(\"/dev/hda\"), ��� ������� ������, ������ ������� �� ����������� ��\n"
-"����� ���� ���� (\"/dev/hdb\"), ��� ��� �� ������� (\"/dev/fd0\").\n"
-"\n"
-" * \"����� �� ������� �������� default �������\": ���� ���������� �������,\n"
-"��� ����� ��� ��������� �� ��������� - � ����������� ������,\n"
-"����� ������ (������ �������).\n"
-"\n"
-"!! ������ �������, ��� ��� ��������� �� �� ����������� �������r (������ ��\n"
-"\"�������\"), ������ ��������� ����� ����� �� ���������� Mandrake\n"
-"Linux ������! ������ ������� �� ����� �� ������� ��� ���� ��������\n"
-"� ����� ������. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) � Grub �� ��������: ��� ���������j� �� �������� \n"
-"��� Linux ��� ���� ��j� ����� ���������� ������ �������� �� �a��� ��������.\n"
-"�������, ��� ����� ���������� ������� �� �������� ����������� � "
-"�����������.\n"
-"������� �� ��j� ����,������ �� ���� ������� ���e.������ ���� �������\n"
-"�����e��e\n"
-"\n"
-"�����e,���e�e ������ �� ������� ������.��������� ��e�������e �� �������� "
-"�����\n"
-"� ��� �����j�, ����� �� ��������� ��������j��e ����je �� �� ������e. ���\n"
-"���a ������ ����� boot ������� �� �� �� �� ����� ���������!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"������ �������� ��� ������ �� ��������� ������� �������� �� �������� GNU/"
-"Linux-�.\n"
-"\n"
-"������� ������� ����� ��� ������,��������� \"���� ������\n"
-"����� (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control "
-"Centernand clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX ���� ����� �� ��������� IDE ������� �������� � ����� ��������.DrakX �� "
-"����a���� PCI SCSI �������(e).\n"
-"������� DrakX ����a�� SCSI �������(�) � ���� ���� ��j� ������a��� ������� \n"
-"(���j���) ��������� �� ��(��) ���������� �����������.\n"
-"\n"
-"����� �� ���� ������ �� ��� ��������� ���� ���������� �� ���� ����������� "
-"DrakX �� ��� ������� �� �� ����� PCI SCSI �������. �������� \"��\" \n"
-"������� ����� �� ����� SCSI ������� �� ������ ������. �� ���������� ����� "
-"���� ���� �� ��������� �������������.\n"
-"�������� \"��\" ������� ������ SCSI �������� �  �a����. ������� ����� "
-"�������\n"
-"��������� �� ����� ������������ �������� ������������ \"�������� ���� � "
-"��������\"� ������ �� \"� ����\". �����������\n"
-"����� � ���� ������� �� \"� ����\" �� �� �� ������� �� ������ � SCSI "
-"���������.\n"
-"\n"
-"������� ������ ����� �� ������������� �a� �������, DrakX �e\n"
-"��� ������� �� �������� ����j� �� ���a.����� �� �� �� ��������e DrakX-� �a\n"
-"������ ������� ���� ��� ����ja. ��� ������ � ���e.\n"
-"\n"
-"������� DrakX ���� � ����� �� ������ ������ ���� �� ��������, ���a���� �� "
-"���� �������e ����j� �� ���j���.\n"
-"�������j�� � ������������ ����� (3 ��������, ������� \"���������� "
-"����������� � ����� ��������\")\n"
-"�� �� ������� ���� �� ��������� ����������� � ����������� ��������� �� "
-"�������,�� ���j� Windows ���������j� (������� j� ����� �� �������),\n"
-"�����������j� � ��������, ��� �� ��������a����� \n"
-"��� ��j�a (������� ����� ������� ���������)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"������ ������ � ������e ����� �� yabbot, ��� �� ����� ���������� s������e,\n"
-"������������ ������e, ��� �� emergency boot image.\n"
-"\n"
-"�� ����e OS-��e - ���� ������ ���� ������ � root �������j�.\n"
-"\n"
-"�� Linux, �����j� �������� ����������: \n"
-"\n"
-" * �����a: ��� j� j���������� ��� ��j� �e�e ������� ��� yaboot ������� �� �� "
-"��a����� ��� \n"
-"������� ����j�.\n"
-"\n"
-" * Image: ��� j� ��� ������� ��j� �� ������je.  ������ vmlinux ��� \n"
-"����j���j� vmlinux �� ��������j��.\n"
-"\n"
-" * Root: \"root\" ������ ��� \"/\" �� �a�� Linux ���������j�.\n"
-"\n"
-"  \n"
-" * �������: �� Apple ��������, ��������� ����ja �� ������� �a �������� ����� "
-"�a\n"
-"�������� �����j�������j� ����� �������a, ��� �� ������� �������j� ������� �� "
-"��� �� ��������� ���� \n"
-"������ ���������� ������ � ��e��� ������� �� Apple �������a.  ����� ��� \n"
-"������a:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: ��� ����j� �� ���� ��������� ��� �� �������� �����j����� �����a, "
-"��e ���� j� boot \n"
-"������ ��������, ��� �� �������� ramdisk image �� �����a�� � ������ "
-"�������j��a.\n"
-"\n"
-" * Initrd-�������a: �������a default ramdisk j� ��������� 4096 ��j�a.  "
-"������� ��� ����a\n"
-"������a�� ������� ramdisk-a, ��� ����j� ���� ���� ������a.\n"
-"\n"
-"  - Read-write: �������� �e 'root' �������j� �����j���� �������� ��� read-"
-"only, �� �� ��������a\n"
-"������� �����e���� ������� ��� ���� ������ ������� \"�������\".  ���� ������ "
-"��������� ��� ����j�.\n"
-"\n"
-" * NoVideo: ������� �� Apple ����� ������� ���a�� ����a ��������������, "
-"�����e\n"
-"�������� ��� ����j� �� �� �������� ������ � 'novideo' ����, �� �������� "
-"framebuffer ��������.\n"
-"\n"
-" * Default: ���� j� ��� default Linux �������ja, ������� j� �� ����\n"
-"���������e ENTER ��� yaboot �������.  ���j ���� �� ������ ���� ������� "
-"���a��� �a \"*\", �������\n"
-"���������e TAB �� �� ������ ������� �������j�."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot j� ������� NewWorld MacIntosh �������. �� ���� �a �������\n"
-"GNU/Linux, MacOS, ��� MacOSX, ������� �� �������� �� �a��j �a����.\n"
-"��������, ��� ����� ���������� ������� �� ������j� �������� ����������� � \n"
-"�����������. ������� �� ��j� �����j, ������ ����� ������ ���� �� ����\n"
-"������. ������ �a����� ��� ������ ���������a.\n"
-"\n"
-"������� ����j� Yaboot-a ��:\n"
-"\n"
-"  - �����j���� �����a: J���������� ���������� �����a ��j� �� �������je ��� "
-"���������\n"
-"������a.\n"
-"\n"
-" * Boot ������: �����j� ��� ������ �� �������� ���������j� �������� �� \n"
-"�����a�e GNU/Linux-a. ��������� �������, ���a���� �� �������e bootstrap "
-"�������j� ��e \n"
-"���� �������� ��� ���������j�.\n"
-"\n"
-" * ������� Firmware �����: �� ������� �� LILO-a, �����j� ��� ����� �a��e \n"
-"yaboot-a.  ���� ����� �� ���� � ��������� � � ��� ������� ������ \n"
-"������ ���e�� CD-a, OF �����a, MacOS, ��� Linux-a.\n"
-"\n"
-" * ����� ��� �����a�� ������a: ��� ����� j� �����a ����� ��� LILO �������a.  "
-"����� \n"
-"������ Linux-a, ��a���� ����� �� 0.1 ������e ��� ���� ��� �� �������je\n"
-"default ���� ������a.\n"
-"\n"
-" * ������� �����a�� CD-a ?: ������� ���a���� ��� ����j� ���� ���� �� "
-"��������e \"C\" �a CD ���\n"
-"����� �������� �������.\n"
-"\n"
-" * ������� OF �����a��?: ������� ���a���� ��� ����j� ���� ���� �� ��������e "
-"\"N\" �a �pen\n"
-"Firmware ��� ����� �������� �������.\n"
-"\n"
-" * Default OS: ������ �� ��������� ��j� ���������� ������ �� ���� �������� "
-"��� default ���� Open Firmware \n"
-"����� ������."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"���� �� ��������� ��������� ��������� ������ �� ���� ������. � ����������\n"
-"�� ����� ������������ ��������, ������y - ��� �� ������, ���������� ������� "
-"�����:\n"
-"\n"
-" * \"���\": ��������� �������� �������� �� ���� � �������� �� ������\n"
-"�� ��� ��������� ������� �� ���������.\n"
-"\n"
-" * \"���������\": ��������� �������� ������� ��������� tion � �������� ��\n"
-"������ �� �� ��������� ������ ������� �� ��������.\n"
-"\n"
-" * \"��������� ����\": DrakX, �� default-�, ������ ���� ��������� ���� � "
-"���������� ���� �� �����\n"
-"��������. ��� ����, ����� ��� �������� ��������� ���� �� ���������\n"
-"�� ��������� ����� ���� ��� ������.\n"
-"�������� �� �������� �� ������ \"��������� ����\" �� ��\n"
-"�������� �������� � ������ �� ���������� ����� � ����� �� ��������.\n"
-"\n"
-" * \"�������\": ������ �� ������ \"�������\" ����������� ��������� ��\n"
-"������������� ��������.\n"
-"\n"
-" * \"������ �������\": ������� �� ������ ������� �����������, ���� ��\n"
-"���� ���������. ���� ������ ������� � ���� �����������.\n"
-"\n"
-" * \"TV �������\": ������� �� TV ������� �����������, ���� ��\n"
-"��������� ����. ���� ������ ������� � ���� �����������.\n"
-"\n"
-" * \"ISDN �������\": ������� �� ISDN ������� �����������, ���� ��\n"
-"��������� ����. ������ �������� �� ������ �� �� ��������� ���������\n"
-"���� �� ������ �� ��."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"��������� ���� ���� ��j� ������ �� ��������e �� �� ����������� ���� Mandrake "
-"Linux \n"
-"�������j�. ������ �a�����, ��� ������ �� ���� �� ���� ���������\n"
-"� �e�� �� ���� ���������!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"�������� �� \"� ����\" ������� ������ �� ��������e ��� ������e � \n"
-"�������j� �� ���� ���� �����.������ �a�����, ����� ����� �� \"� ����\", ��\n"
-"�e���� ���� �� ��������� ���� ��j� ������� ��� �������j� �� ���� �����,\n"
-"�� � ���� ��je Windows ������e.\n"
-"\n"
-"�������� �� \"�������\" �� �� ������� ��� �������j� ��� ����e�� �������� �\n"
-"�������j� ��j� �� �������� �� ���� ���� �����."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "������ � %s �� �����������"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"�� ��� �������� ������� �������: %s\n"
-"\n"
-"\n"
-"��� ������� �� ���������� �� �������� ��������. ��� ������ �������� "
-"�����������\n"
-"�����������, ��� �� ���� ���� �������� ���� ����. ������� �� �� ����, ������ "
-"�� ���������\n"
-"��� �� ��� ������.\n"
-"\n"
-"\n"
-"�� �� ������ ������ �� ����������� ��� �������?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "���� ����� ������ ��� NIS ������"
-
-#: ../../install_any.pm_.c:794
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "������� FAT ����������� ������ ������� � ������ %s"
-
-#: ../../install_any.pm_.c:798
-msgid "This floppy is not FAT formatted"
-msgstr "��� ������� ��je ����������� �� FAT ��������"
-
-#: ../../install_any.pm_.c:810
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"�� �� ��������� ���j ����� �� ���a�� �������j� �����a, ��������� ���������j� "
-"�a ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:832 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "������ ��� �������� �������a %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"���� ���������� ���������� � �a��� �a������ �������j� ��������j��e ���j���e "
-"�� �� �������� ������������e.\n"
-"���������j� � ���� ������ ����a�� ��: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"������ �����  root �������j�.\n"
-"�� ���, ��������� ��������� (��� �������� �� ���������).\n"
-"����� ��������� \"����� ���������\" � �������� �� `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "������ ����� swap ���������"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"��, ���� swap ���������\n"
-"\n"
-"�������� ��������� ���� ?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "������ ����� FAT ��������� ��������� � /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "������� �������� �������"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "���� ������� ��������� �������� �� ������a�� ����� �������ja"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partitions"
-msgstr "������� �����je�� ���������"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "���� �� je��� ��������j� �� ���"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "������� Windows �������j� �� loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "���� ��������� ������ �� �������� �� Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "��������� ��������"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "�������� Root �������j� � MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "�������� Swap �������j� � MB:"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "�������� �������� ������� �� Windows �������j�"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "����j ���������  ������ �� ��������� ��������?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing Windows partition"
-msgstr "������������ ������� Windows ����-�������"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"������� �� ������� �������� FAT �������ja �� ���� �� ������� �a��� "
-"�������j��, \n"
-"���� ����e�� ��e��e: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"�a�� Windows �������j� j� ������� �������������, ���� ��������� ``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ÿ�������!\n"
-"\n"
-"DrakX ����� �� ������ �������� Windows ���������. ������ �������: ���\n"
-"��������� �� ������. ������� �� �� ���� ����� ������, ���� ����� �� ��a����\n"
-"�� ���������j�,��������� ��� Windows-��\n"
-"scandisk (���������� � defrag), � ���� ������ ��������� ���������j�.\n"
-"��� ��� �������, ���������� �� (� ����)."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for Windows on"
-msgstr "��j� �������� �����e �� �������� �� ������e"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "��������� %s "
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT ������ �������� ��������: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partition to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"�� �����je FAT �������j� ��j��a �� ���� ��������� �������a ��� ��j� �� ���� "
-"���������� �a loopback (��� ���� ������� ��������� �������a)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "������� ���� ����"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "������ Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"����� ���� �� j����� ���� �����, �� ��j� �� ��� ������ �� ����������� "
-"������ ?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "��� �����je�� �������j� � ������ �� ����� %s �� ���� ���������"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Custom ���� �����������a�e"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "������� fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"���a ������ �������������� �a� %s ���� ���� ������\n"
-"�a�a ��������,�� ���������� �� ��������� ������e�� `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "������ ������� ��������� �������a �� Windows �������j�"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "�� ���� �� ����a��� �������� ������� �� ��������a��"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX �������� �� �����������a�� j� ����a��� ����e�� �e�e��:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "�����������a�� ��j� ������ : %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "���������  �����"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "�������� �� ����e"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"������, ��� ������ ���� �� �� ��������.\n"
-"��������� �� ��� �����!"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "��������a ����� ��������� %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"���� �a��� ������ ���� ����� �����������.\n"
-"�a� cdrom ��e��j ��� cd �� ����������.\n"
-"��������e cdrom �� ������������ ����j����� ������e�e \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "�������� �  %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "������������� �������� ������"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "�������� ����� `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"�a� ������ ��� �a��� �����. ����� ���� ������ ��a�� �������� ��� "
-"���������j�\n"
-"Mandrake Linux. ������� �� ��� ��j��e, ������ ������� ���������� "
-"���������j�. �� �� �� ��������,\n"
-"���������e `F1' ��� �����a�� �� CDROM-a, � ���� �����j�e  `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "�����������e �����"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "����� ��� �� ��������� j���� �� ����e��� ������������� ����a:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "������ �������a ����� ��j� ��e �������� ������  %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"������� ������ �� ����������� �a��,\n"
-"��������� ������������ ���j ������ ��j� ������ �� �����������.\n"
-"\n"
-"��� ����� �������� �� �� ����������� ���� ����� ������;\n"
-"��� �� ��� �������� �� 100%% ���� ����������� ��� ������."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"�� �a��� ����� ��� ����� ���� �a %d%% ���� �����a.\n"
-"\n"
-"������� ������ �� ����������� �a�� �� ����a,\n"
-"��������� ������������ ���j ������ ��j� ������ �� �����������.\n"
-"��� ����� �������� �� �� ����������� ���� ����� ������;\n"
-"��� �� ��� �������� ��  %d%% ���� ����������� ���������� ����� ���j �����a"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "���� ���� �� �� ���������� ������ � ������e� ������."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "�������� �����a �� �����������"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:675
-msgid "Package Group Selection"
-msgstr "������ ����� ������"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:690
-msgid "Individual package selection"
-msgstr "��j����a��� ���a�� �����a"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:615
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "������ ��������: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "��� �����"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "���: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "�������: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "��������: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "�a���: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "�� ������ ����������� ���j ����� j�� ���� ���� ��������� �������a"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "��e�e�� ������ ����� �� ���� �����������"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "����e�� ������ �� ���� ���������"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "�� ������ �����������/������������� ���j �����"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "��� j� �������� �����,� �� ���e ���� ������������"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "������ ������������� ���j ����� j�� j� �e� ����������"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"���j ����� ���� ���� a�������\n"
-"�� �� ������� ������ �� �� ���������j��e ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "�� ������ ������������� ���j �����.�� ���� ���� a�������"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "���������� ������� �������� �����e"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "����������"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "������/����� �� �������"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "��������� ��������� ������"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "��������� ����������"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:525
-msgid "Choose the packages you want to install"
-msgstr "������� ������ �� �����������"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:757
-msgid "Installing"
-msgstr "����������"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "����������"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "��������� �����"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation..."
-msgstr "�a�� �������, ��������� �����������"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ������"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "���������� ����� %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "��������"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-msgid "Refuse"
-msgstr "������"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:782
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"��������� �a� Cd-Rom!\n"
-"\n"
-"������e �a� CD ���a��� �� \"%s\" � ����� � ���������� \"� ����\" ���a ��� "
-"�������.\n"
-"������� �� ������ ����������  �������."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:794
-#: ../../install_steps_interactive.pm_.c:798
-msgid "Go on anyway?"
-msgstr "�������� ��������� ���� ?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:794
-msgid "There was an error ordering packages:"
-msgstr "������ � ����� ������:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:798
-msgid "There was an error installing packages:"
-msgstr "������ ��� ���������j� �����a:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"������e�e !\n"
-"\n"
-"�a����� �������j�� ���� �������� ������. ������� �� �� ��a���� �� ���� "
-"��j�� \n"
-"�����, ���� ������ �����e�� �� ��������a�� ����e��� CD-a. ���������� "
-"'����j��' \n"
-"�� �� ��������� ���������j� ��� �������� ��� CD ����ja.\n"
-"\n"
-"\n"
-"���� ���������� �������� � ����e��� CD ����j��� ���� ���\n"
-"GPL �������� ��� ������� ���������. ����� ����� ���������� j� ���� "
-"���������\n"
-"�������� � ��������� ���������� ��������. \n"
-"�a����� �������j�� � ������j�� �� �� ������ ����������� ��������� ��e \n"
-"���� ��������� ��� ��������������� �������� ���������e. \n"
-"����� ������� �� � ������� ����a������ ��������, �������e \n"
-"(���� �� ����� backup-� �������a), �����������j�, �������� �������, \n"
-"�������a�e, �e-�����j���a�e ��� �e�a�� ����������. \n"
-"���� ��j� ��� ������� ��j� ��j� ���������� ����������� ���a�� � ������ �a�� "
-"����a\n"
-"� ����j �������. ������� ��� ���e���� ������� �� �������j� �����\n"
-"����a, ������ �� ������ ����������� �������� �� ���� �� j������\n"
-"������a, ��� �� ����������� �� �� ���� ��������� �� ��e��. ������� ��� � "
-"������, ������ ��� �� �������� \n"
-"������������ ������������ ��� ������� ���������e. \n"
-"������ �� ��e�� �������� ��� �����a�� ������ ���������� ������j��� �\n"
-"�����������j� j� ������ ��������.\n"
-"\n"
-"\n"
-"��� ����� �� ���������� �� ����e��� CD ����j��� �������j� ������� \n"
-"�������������� �������� � �a����e�� �� �������� � ������������j ���j��� � \n"
-"������a ��j� �� ����e��j� �� ���������� �������e.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "X�,��j����� �� ������"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "�� �� ������ ������ �� ��������� �����������?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "����������� ������"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"�������a�e\n"
-"\n"
-"���������� ������ � ����� ���������� �������� � Mandrake Linux "
-"����������j� \n"
-"�� �a�e �� ���� ����� \"���������� ���������\" . ���������� ��������� "
-"�k����j�, ��� ���� � \n"
-"���������� �a, ���� �������a, �����a, ������� � �����������j� ��j� je "
-"�����a�� ���������� \n"
-"������ � ����� ���������� Mandrake Linux ����������je.\n"
-"\n"
-"\n"
-"1. �������� ������\n"
-"\n"
-"�a����� �������j�� ���j ��������. ���j �������� j� �������� ������ "
-"���e�����e�� ��� �   \n"
-"MandrakeSoft S.A. ��j� ���a�� ����� �� ���������� ��������e.\n"
-"��������a���, �����a��� ��� ��������� ����������� ��������� � ���� ��� ����, "
-"�� ����������� \n"
-"���������� � ������� �� ��a���� �� ����������� �������� � ������ � ��a�� � "
-"���j �������. \n"
-"������� �� �� ��a���� �� ���� ��j�� ����� �������, ������ ����� �a "
-"����������e, �������� ��� ��������e \n"
-"���������� ��������e. \n"
-"���� ��j� ������j ���������je, ��������a�� ��� �������� ����������� "
-"��������� �� �a��� ��j� �� �� ��a�� �a \n"
-"���������� � �������� ��� ������e �� ������ ������� �a��� ����� ��� ���� \n"
-"��������. �� ������ ������� �������, ������ ����� ����������� ����je \n"
-"����������� ��������a.\n"
-"\n"
-"\n"
-"2. ���������� �������ja\n"
-"\n"
-"���������� ��������� � ����e�� ������������ja �� ��������� \"��� ����e\", � "
-"��� �������je, �� ������a \n"
-"��j� �� ��������� �������.\n"
-"MandrakeSoft S.A. �e�e, � ���� �������� � � ��������� �����a, ���� �������� "
-"�� ���� ��j� �����j���e,\n"
-"�����j�e, �������e ��� ���������� ����� (������j��� �����������e����� ��� "
-"������e \n"
-"� ������a��, ������� ������a�a, �������j���� �������a, �������e ��a��� � "
-"����e ��j� �� �������� �����e \n"
-"�����e, ��� �� ���� ��j� ����� �������) ��je ���������e �� �������e ��� "
-"������������ ������e�� ����������� \n"
-"��������a, ��� ���� j� MandrakeSoft S.A. ��������� � �������� �� ��������� "
-"��j��� ����e \n"
-"�����.\n"
-"\n"
-"���������� ������������ �����e �a �������a�e ��� �������� ����a����� "
-"�������a � ����� �e�����\n"
-"\n"
-"�� ������� ��j� �� ��������� �������, MandrakeSoft S.A. ��� ������ "
-"������������ �e��, �� ��� ��j�� �������a, ���� \n"
-"��������� �� �����j����, ������� �������� ��� ���������e �����(������j��� "
-"�����������e \n"
-"����� ��� ������e � ������a��, ������� ������a�a, �������j���� �������a, "
-"�������e ��a��� \n"
-"� ����e ��j� �� �������� �����e �����e, ��� �� ���� ��j� ����� �������) ��je "
-"���������e \n"
-"�� �������e ��� ������������ ������e�� ����������� ���������� ��� ��je "
-"���������e download-������ ����������� ���������� \n"
-"���� ��� Mandrake Linux ��j�� ��j� �� ����a���� ��� ���������� � ����� "
-"������� �� �������� �������a.\n"
-"��� ���������� ����� �� ����e��j�, ��� ���� � ���������� �a,������������� "
-"���������e \n"
-"��j� �� ������ � ����������� ����������a.\n"
-"\n"
-"\n"
-"3. GPL � �� �� ������ ������e\n"
-"\n"
-"���������� ��������� �� �����je �� ���������� ��������� �� ������ ��������� "
-"���� ��� �������a. �e���a  \n"
-"�� ���� ���������� �� ������ ��� ���������� � �������� GNU ����� J���e \n"
-"������e, ��j� �� �� ���� ����  \"GPL\", ��� ������ �������. �e���� ���� "
-"������� ��������� ��������, \n"
-"��������a�e, ��������j� ��� ������������j� ���������� ��j� ��� ��������j�. "
-"������ ��� �� �a����� �������� �������e \n"
-"� ������ ��������� ������� �� ����� ���������� ��� �������� ���� ��je "
-"����������e. ���� ��j� ���a�e \n"
-"������ �� ������� ���������� ����� �� ���� ���������� �� ������ ���������� � "
-"���a MandrakeSoft.\n"
-"�������� ��j� j� ������ MandrakeSoft S.A. ����e�� ��� GPL �������. "
-"�����������j� ������ �� \n"
-"������ MandrakeSoft S.A. ����e�� ��� ������� �������. ����� �� ��������� "
-"�����������j�  \n"
-"�� ���a�e.\n"
-"\n"
-"\n"
-"4. ����� �� ������������� ���j���\n"
-"\n"
-"��� ����� �� ���������� ����������� ��������� �������j� ������� �������� � "
-"��a \n"
-"�� �a����e�� �������� � �������������j ���j��� � ������� ��j� �� ����e��j� "
-"�� ���������e �������e.\n"
-"MandrakeSoft S.A. j� ���������� ���j� ����� �� ���������a�� ��� ��������j� "
-"������������������a, ���� �� ������ ���� � �a \n"
-"�����e, �� ��� ��� ����� � ��� �������e.\n"
-"\"Mandrake\", \"Mandrake Linux\" � ���������� �������� � �����e MandrakeSoft "
-"S.A.  \n"
-"\n"
-"\n"
-"5. �������� ����a \n"
-"\n"
-"������� �� ���� ��j� ��� ���� ������� �������a, ��������� � ���  ������ "
-"�����e, ���j \n"
-"��� �� �������j� �� ���� �����a. �������� ��� �a ����e��j��e������ �����e "
-"����\n"
-"������a.\n"
-"�������� � ������ ��� ������� �� �������� �������� ��������e.\n"
-"��� ����������� �� ������� ���� �e���� ��� ���a. ��� �������� \n"
-"��������, ����������� �� ���� ��u���� �� ��������j��� ������ �������� � "
-"������ - ��������a.\n"
-"�� ���� ��j� ���a�� ��j� j� ������ �� ���j ��������, ����������j��  "
-"MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1017
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "��������a"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "���������  �������� ���������."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "���� j� �����������a ���� ����� ��������� ��������a"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "��j�  ������������ ����� ������ ?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "�����������/���������"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "�� �� �� ��� ����������� ��� a�������� ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "�����������"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "�������"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "���������"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "��������� ���� ������"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "��������e ��� ����."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "���� �� ����"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "��������� �� ���� �������� ���� �� ��� ��� ���������."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "�������j� ������a"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "�������j� 2 ������a"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "��������� 3 ������a"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "������������ PCMCIA �������..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "K������������  IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "No partition available"
-msgstr "���� ��������� ���������"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "������a�� �������j� �� ������a�e�� �a��� ������a�a"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "��������� ����� ���������"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"�� ���� ��������� ������ ���������, ����� �� ��������� �� ���� :(\n"
-"�������� ���� ����������� ���� ��������ռ��� �������� �� ���������� ���� "
-"�������je (��� ����Ƹ �� ���� ��������� !).\n"
-"����� �e�e�� j� �� �� DrakX ��������� �� ��������je ������ �������ja.\n"
-"(��e��� je %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake �� ���� �� �������� ������� ������ ���������.\n"
-"���� �������� ��� �� ��� ����� !"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"���� ��������� �������� �� 1MB bootstrap! ����������� �� �� ���������, ��� "
-"�� �� ������� ���������, �������� �� �������� bootstrap ��������� � "
-"DiskDrake-�"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "���� root ��������� �������� �� ���������"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Root ���������"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "�� ����� ��������� �� root ��������� (/) ����� �������?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "����� �� ���������� ������ �� ������� ������ � ������ ���������"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "������� ��������� �� �����������"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "������� ���� ������� ?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "����������� ���������"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "�����a�� � ��������a�� �������e %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "���� ������� swap-� �� ������ �����������, ������� ��� swap-�"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages..."
-msgstr "������ ������"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade..."
-msgstr "������ ������ �� ���������..."
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr "�a� ������ ���� ������� ����� �� ���������j� ��� a�����a�e (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:538
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"����� ��� �� ��������� ��������� ��� ������� ��������� ������ �� �������.\n"
-"������ ���� �� ������� �� ���� ��� � ���  auto_install ����������� �������."
-
-#: ../../install_steps_interactive.pm_.c:541
-msgid "Load from floppy"
-msgstr "������ �� �������"
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Loading from floppy"
-msgstr "�������� �� �������"
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Package selection"
-msgstr "������ ������"
-
-#: ../../install_steps_interactive.pm_.c:548
-msgid "Insert a floppy containing package selection"
-msgstr "������� ������� ���� ������ ��������� ������"
-
-#: ../../install_steps_interactive.pm_.c:560
-msgid "Save on floppy"
-msgstr "����� �� �������"
-
-#: ../../install_steps_interactive.pm_.c:628
-msgid "Selected size is larger than available space"
-msgstr "����������� �������� �� ���� �� ��������� ��������"
-
-#: ../../install_steps_interactive.pm_.c:641
-msgid "Type of install"
-msgstr "��� �����������"
-
-#: ../../install_steps_interactive.pm_.c:642
-#, fuzzy
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"����� ����������� ������� ����� ������\n"
-"��������� ��������� ����������� ���� ������"
-
-#: ../../install_steps_interactive.pm_.c:645
-msgid "With X"
-msgstr "�� X-�����"
-
-#: ../../install_steps_interactive.pm_.c:647
-msgid "With basic documentation (recommended!)"
-msgstr "�� �������� �������������� (���������!)"
-
-#: ../../install_steps_interactive.pm_.c:648
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "������� ��������� ����������� (������� ��� urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:732
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"������� ��a�� ���� �������� CD-��e, �������� ��  Ok.\n"
-"������� ������ ��j���� CD, �������� ��  Cancel.\n"
-"��� ��� �������j�  ���� ���� CD-��� , ���������j�e �x, � ���� �������� �� Ok."
-
-#: ../../install_steps_interactive.pm_.c:737
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ���a��� ��� \"%s"
-
-#: ../../install_steps_interactive.pm_.c:757
-msgid "Preparing installation"
-msgstr "��������� �����������"
-
-#: ../../install_steps_interactive.pm_.c:766
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"���������� ������ %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:812
-msgid "Post-install configuration"
-msgstr "���������������� ������������a"
-
-#: ../../install_steps_interactive.pm_.c:818
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "������� Boot ������� � ������ %s"
-
-#: ../../install_steps_interactive.pm_.c:824
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "������� Update Modules ������� � ������ %s"
-
-#: ../../install_steps_interactive.pm_.c:844
-msgid ""
-"You now have the opportunity to download encryption software.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"���� ���������� �����x ������� ��j� �� ������ �� ���j  �������  ��� � "
-"����������\n"
-"������ ���������������,����� �/��� �������� �������� �����\n"
-"�� ������� �� �� ����� ���������  download � �������� ��������.\n"
-"\n"
-"�����  � ��������� ����� �� ���j� �� �� ������� ��������j�\n"
-"�����.������� �� ��  ���� �e��, ���  �� ������� ������je\n"
-"\n"
-"MandrakeSoft ��j� ��������� �� ���� ����� ������� ��� �������j� ���� �������,"
-"���� �� ������ ����� ��j� �� ���� j�����.\n"
-"\n"
-"\n"
-"�� ���� ����� ���a�� ������ �� ��� ���� ����������j�e \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:883
-#, fuzzy
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been released after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"���� ����� ��������� �� download-����� ��������� ������ ���� ��\n"
-"�������� ����� ������� ������������.\n"
-"\n"
-"�������� ���������� �������� ��� �������� � ����������, ��� �� �� �� ��� "
-"������� ������\n"
-"�� ����� �������� ���������.\n"
-"\n"
-"�� �� ������ �� ����������� update-��� ?"
-
-#: ../../install_steps_interactive.pm_.c:898
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"������������� Mandrake Linux web ���� �� �� ������ ����� ��������� mirror-�"
-
-#: ../../install_steps_interactive.pm_.c:903
-msgid "Choose a mirror from which to get the packages"
-msgstr "��������� mirror �� ��� ���� ������� ������"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "������������� mirror �� ����� ������� ������"
-
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Which is your timezone?"
-msgstr "��j� j� �a�� ��������� ���a ?"
-
-#: ../../install_steps_interactive.pm_.c:944
-msgid "Hardware clock set to GMT"
-msgstr "��� ��������� (BIOS) �������� �� ������� �� GMT"
-
-#: ../../install_steps_interactive.pm_.c:945
-msgid "Automatic time synchronization (using NTP)"
-msgstr "���������� �������������� ������� (����� NTP-�)"
-
-#: ../../install_steps_interactive.pm_.c:952
-msgid "NTP Server"
-msgstr "NTP ������"
-
-#: ../../install_steps_interactive.pm_.c:986
-#: ../../install_steps_interactive.pm_.c:994
-msgid "Remote CUPS server"
-msgstr "������� CUPS ������"
-
-#: ../../install_steps_interactive.pm_.c:987
-msgid "No printer"
-msgstr "��� �������a"
-
-#: ../../install_steps_interactive.pm_.c:1004
-msgid "Do you have an ISA sound card?"
-msgstr "�� �� ����� ISA ������ �������?"
-
-#: ../../install_steps_interactive.pm_.c:1006
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"��������� \"sndconfig\" ����� ����������� �� �� �������� ����� ������ �������"
-
-#: ../../install_steps_interactive.pm_.c:1008
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"���� ����������� ������ �������. ��������� \"harddrake\" ����� �����������"
-
-#: ../../install_steps_interactive.pm_.c:1013 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "�a�����"
-
-#: ../../install_steps_interactive.pm_.c:1016
-msgid "Mouse"
-msgstr "���"
-
-#: ../../install_steps_interactive.pm_.c:1018
-msgid "Timezone"
-msgstr "��������� ���a"
-
-#: ../../install_steps_interactive.pm_.c:1019 ../../printerdrake.pm_.c:2279
-#: ../../printerdrake.pm_.c:2357
-msgid "Printer"
-msgstr "�������"
-
-#: ../../install_steps_interactive.pm_.c:1021
-msgid "ISDN card"
-msgstr "ISDN ������a"
-
-#: ../../install_steps_interactive.pm_.c:1024
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sound card"
-msgstr "������ ������a"
-
-#: ../../install_steps_interactive.pm_.c:1028
-msgid "TV card"
-msgstr "TV �����a"
-
-#: ../../install_steps_interactive.pm_.c:1066
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1094
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1067
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1103
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1068
-#: ../../install_steps_interactive.pm_.c:1090
-msgid "Local files"
-msgstr "������� ��������"
-
-#: ../../install_steps_interactive.pm_.c:1077
-#: ../../install_steps_interactive.pm_.c:1078 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "����� root �������"
-
-#: ../../install_steps_interactive.pm_.c:1079
-msgid "No password"
-msgstr "��� �������"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "��� ������� j� �����e j���������a (����� �a ��� ��� %d �������)"
-
-#: ../../install_steps_interactive.pm_.c:1090 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "���������������"
-
-#: ../../install_steps_interactive.pm_.c:1098
-msgid "Authentication LDAP"
-msgstr "LDAP ���������������"
-
-#: ../../install_steps_interactive.pm_.c:1099
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1100
-msgid "LDAP Server"
-msgstr "LDAP ������"
-
-#: ../../install_steps_interactive.pm_.c:1106
-msgid "Authentication NIS"
-msgstr "NIS ���������������"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "NIS Domain"
-msgstr "NIS �����"
-
-#: ../../install_steps_interactive.pm_.c:1108
-msgid "NIS Server"
-msgstr "NIS ������"
-
-#: ../../install_steps_interactive.pm_.c:1143
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"������� ���� ���������� ����� �������� ����� ������ ������� ��� ����������\n"
-"�� ��������� �������a. ��� �� ������� ��� �� ������ �� �����������\n"
-"SILO(��� grub) �� ��� ������, ��� ����� ���������� ������ ������ SILO, ��� "
-"SILO ��\n"
-"���� �� ����� ���������. ������� ���� ������ ��������� �� Mandrake Linux\n"
-"'������ �� ���������', ��� �������� �������� � ������� ���� ��������.\n"
-"������� ������ �� �������� ������� ������� �� ��� ������������� ������� � "
-"����� � ���������� \"��\"."
-
-#: ../../install_steps_interactive.pm_.c:1159
-msgid "First floppy drive"
-msgstr "���� �����/�������� ��e��j "
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid "Second floppy drive"
-msgstr "����� �����/�������� ��e��j"
-
-#: ../../install_steps_interactive.pm_.c:1161 ../../printerdrake.pm_.c:1851
-msgid "Skip"
-msgstr "��������"
-
-#: ../../install_steps_interactive.pm_.c:1166
-#, fuzzy, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"������� ���� ���������� ����� �������� ����� ������ ������� ��� ����������\n"
-"�� ��������� �������a. ��� �� ������� ��� �� ������ �� �����������\n"
-"LILO(��� grub) �� ��� ������, ��� ����� ���������� ������ ������ LILO, ��� "
-"LILO ��\n"
-"���� �� ����� ���������. ������� ���� ������ ��������� �� Mandrake Linux\n"
-"'������ �� ���������', ��� �������� �������� � ������� ���� ��������.\n"
-"�� �� ����� �� �������� ������� ������� �� ��� ������?"
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(ÿ�������! �� ��������� XFS �� ���� root ���������,\n"
-"�� �������� �������� 1.44 Mb ������� ��������� ���� ������,\n"
-"���� ��� XFS ����� ������ �������)."
-
-#: ../../install_steps_interactive.pm_.c:1180
-msgid "Sorry, no floppy drive available"
-msgstr "�� ������, ���� ������e"
-
-#: ../../install_steps_interactive.pm_.c:1184
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"���������� �������� ������ ���� ���� ���������  �� �������� ������ �������"
-
-#: ../../install_steps_interactive.pm_.c:1188
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "������� ������� � ������ %s"
-
-#: ../../install_steps_interactive.pm_.c:1191
-msgid "Creating bootdisk..."
-msgstr "������� ������� ����..."
-
-#: ../../install_steps_interactive.pm_.c:1198
-msgid "Preparing bootloader..."
-msgstr "��������� �������..."
-
-#: ../../install_steps_interactive.pm_.c:1209
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"����� ������� �� ����� ���������� ��� ��������� \n"
-" ������, yaboot ������� ���� ������ ��� ���.\n"
-"����������� �� ���� ����������, ��� ���� ������ ��\n"
-" BootX �� �� ������� ������"
-
-#: ../../install_steps_interactive.pm_.c:1215
-msgid "Do you want to use aboot?"
-msgstr "�� �� ������ �� ��������� aboot ?"
-
-#: ../../install_steps_interactive.pm_.c:1218
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"��e��� ��� ���������j� aboot-a, \n"
-"�� �� �a ������ �� ���������� ��� ��� �� ���� �����e�� ���� �������je?"
-
-#: ../../install_steps_interactive.pm_.c:1225
-msgid "Installing bootloader"
-msgstr "���������� �������"
-
-#: ../../install_steps_interactive.pm_.c:1231
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "����������� �������a ��������. ������ ��:"
-
-#: ../../install_steps_interactive.pm_.c:1239
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"���a���� �� ��������� Open Firmware boot-��e��j �� \n"
-" �� ����� �� ��������� �������.  ������� �� ������ ������\n"
-" ��� �������� ������ Command-Option-O-F ��� �����a�� � ������e:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" ���� �����j�e: shut-down\n"
-"���� ����e�� ��� ������j��� �a���� ������� �� �� ������ �������� ������."
-
-#: ../../install_steps_interactive.pm_.c:1283
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "������� ������ ������� � ������ %s"
-
-#: ../../install_steps_interactive.pm_.c:1287
-msgid "Creating auto install floppy..."
-msgstr "������� ���� ������������ �����"
-
-#: ../../install_steps_interactive.pm_.c:1298
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"���� ������ ���� ������������.\n"
-"\n"
-"�� �� ������� ������ �� �������� ?"
-
-#: ../../install_steps_interactive.pm_.c:1309
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"���������, ����������� �� ��������.\n"
-"�������� ������� �� ������ � ���������� <Enter> �� �� ������� ��������.\n"
-"\n"
-"\n"
-"�� ����������� � ���������� ���� �� �� ����������� �� ��� ������\n"
-"Mandrake Linux �������, ���������� ��� 'Errata' ���� ������ ���� ��\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"����������� � ������������� ����� ������� ������ ���� � ����-�������������\n"
-"�������� ��������� Mandrake Linux '������ �� ���������'."
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid "Generate auto install floppy"
-msgstr "������j ���� ������������ �������"
-
-#: ../../install_steps_interactive.pm_.c:1328
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"���� ���������j� ���� ���� ������� �������������� ������� �����e,\n"
-"� ��� �����j� �����e�� �������� ��� ����-������!!\n"
-"(��� �� ������ �� ���������j� �� �����j �a����).\n"
-"\n"
-"����� ������ �� �������� ���������j�.\n"
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Automated"
-msgstr "����������"
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Replay"
-msgstr "���a��a�e"
-
-#: ../../install_steps_interactive.pm_.c:1336
-msgid "Save packages selection"
-msgstr "�a����j �������j� �����a"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux ����������� %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"<Tab>/<Alt-Tab> ����. ������ ��������a | <Space> ����� | <F12> ������� �����"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "�������j� kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "��������� ����"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "��������"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "�������"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "���� �������..."
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "��� �����, �������� ������\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "��� ����� ? (�� default-� %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"����� ���� ����� �� ��������:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "��� �����? (0/1, default `%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "������ `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button?"
-msgstr "�� �� ������ �� �������� �� ���� ������? "
-
-#: ../../interactive_stdio.pm_.c:103
-msgid " enter `void' for void entry"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "��� �����? (default `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> ������� ����� ������ �� ����� �� (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"��������� ���� ���� �� 10 ���� ������ �� ���������,\n"
-"��� ���� �������� �� Enter �� �� ���������.\n"
-"��� �����? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> ��������, ��������� ���:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Re-submit"
-
-#: ../../keyboard.pm_.c:197 ../../keyboard.pm_.c:228
-msgid "Czech (QWERTZ)"
-msgstr "����� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:198 ../../keyboard.pm_.c:230
-msgid "German"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:199
-msgid "Dvorak"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:200 ../../keyboard.pm_.c:237
-msgid "Spanish"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:201 ../../keyboard.pm_.c:238
-msgid "Finnish"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:202 ../../keyboard.pm_.c:239
-msgid "French"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:203 ../../keyboard.pm_.c:264
-msgid "Norwegian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:204
-msgid "Polish"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:205 ../../keyboard.pm_.c:272
-msgid "Russian"
-msgstr "�����"
-
-#: ../../keyboard.pm_.c:207 ../../keyboard.pm_.c:274
-msgid "Swedish"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:208 ../../keyboard.pm_.c:289
-msgid "UK keyboard"
-msgstr "UK ��������a"
-
-#: ../../keyboard.pm_.c:209 ../../keyboard.pm_.c:290
-msgid "US keyboard"
-msgstr "US ��������a"
-
-#: ../../keyboard.pm_.c:211
-msgid "Albanian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:212
-msgid "Armenian (old)"
-msgstr "��������� (�����)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Armenian (typewriter)"
-msgstr "��������� (typewriter)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Armenian (phonetic)"
-msgstr "��������� (��������)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Azerbaidjani (latin)"
-msgstr "�����ej����  (��������)"
-
-#: ../../keyboard.pm_.c:221
-msgid "Belgian"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:222
-msgid "Bulgarian (phonetic)"
-msgstr "�������� (��������)"
-
-#: ../../keyboard.pm_.c:223
-msgid "Bulgarian (BDS)"
-msgstr "�������� (BDS)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Brazilian (ABNT-2)"
-msgstr "��������� (ABNT-2)"
-
-#: ../../keyboard.pm_.c:225
-msgid "Belarusian"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:226
-msgid "Swiss (German layout)"
-msgstr "���������� (������� ��������)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Swiss (French layout)"
-msgstr "���������� (���������  ��������)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Czech (QWERTY)"
-msgstr "����� (QWERTY)"
-
-#: ../../keyboard.pm_.c:231
-msgid "German (no dead keys)"
-msgstr "���a��� (��� ������ �������)"
-
-#: ../../keyboard.pm_.c:232
-msgid "Danish"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:233
-msgid "Dvorak (US)"
-msgstr "������ (US)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Dvorak (Norwegian)"
-msgstr "������ (��������)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Dvorak (Swedish)"
-msgstr "������ (�������)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Estonian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:240
-msgid "Georgian (\"Russian\" layout)"
-msgstr "��������� (\"�����\" ��������)"
-
-#: ../../keyboard.pm_.c:241
-msgid "Georgian (\"Latin\" layout)"
-msgstr "��������� (\"���������\" �������)"
-
-#: ../../keyboard.pm_.c:242
-msgid "Greek"
-msgstr "�����"
-
-#: ../../keyboard.pm_.c:243
-msgid "Hungarian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:244
-msgid "Croatian"
-msgstr "���a����"
-
-#: ../../keyboard.pm_.c:245
-msgid "Israeli"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:246
-msgid "Israeli (Phonetic)"
-msgstr "��������� (��������)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Iranian"
-msgstr "�������"
-
-#: ../../keyboard.pm_.c:248
-msgid "Icelandic"
-msgstr "���������"
-
-#: ../../keyboard.pm_.c:249
-msgid "Italian"
-msgstr "�����������"
-
-#: ../../keyboard.pm_.c:251
-msgid "Japanese 106 keys"
-msgstr "J������� 106 ������a"
-
-#: ../../keyboard.pm_.c:254
-msgid "Korean keyboard"
-msgstr "����j����� ��������a"
-
-#: ../../keyboard.pm_.c:255
-msgid "Latin American"
-msgstr "������-��������"
-
-#: ../../keyboard.pm_.c:256
-msgid "Lithuanian AZERTY (old)"
-msgstr "��������� AZERTY(�����)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Lithuanian AZERTY (new)"
-msgstr "��������� AZERTY(����)"
-
-#: ../../keyboard.pm_.c:259
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "��������� \"number row\"QWERTY"
-
-#: ../../keyboard.pm_.c:260
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "��������� \"��������\" QWERTY"
-
-#: ../../keyboard.pm_.c:261
-msgid "Latvian"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:262
-msgid "Macedonian"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:263
-msgid "Dutch"
-msgstr "������"
-
-#: ../../keyboard.pm_.c:265
-msgid "Polish (qwerty layout)"
-msgstr "������ (qwerty ��������)"
-
-#: ../../keyboard.pm_.c:266
-msgid "Polish (qwertz layout)"
-msgstr "������ (qwertz ��������)"
-
-#: ../../keyboard.pm_.c:267
-msgid "Portuguese"
-msgstr "�����������"
-
-#: ../../keyboard.pm_.c:268
-msgid "Canadian (Quebec)"
-msgstr "�������� (������)"
-
-#: ../../keyboard.pm_.c:270
-msgid "Romanian (qwertz)"
-msgstr "�������� (qwertz)"
-
-#: ../../keyboard.pm_.c:271
-msgid "Romanian (qwerty)"
-msgstr "�������� (qwerty)"
-
-#: ../../keyboard.pm_.c:273
-msgid "Russian (Yawerty)"
-msgstr "����� (������)"
-
-#: ../../keyboard.pm_.c:275
-msgid "Slovenian"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:276
-msgid "Slovakian (QWERTZ)"
-msgstr "�������� (QWERTZ)"
-
-#: ../../keyboard.pm_.c:277
-msgid "Slovakian (QWERTY)"
-msgstr "�������� (QWERTY)"
-
-#: ../../keyboard.pm_.c:279
-msgid "Serbian (cyrillic)"
-msgstr "������ (��������)"
-
-#: ../../keyboard.pm_.c:281
-msgid "Tamil"
-msgstr "��������"
-
-#: ../../keyboard.pm_.c:282
-msgid "Thai keyboard"
-msgstr " Thai ���������"
-
-#: ../../keyboard.pm_.c:284
-msgid "Tajik keyboard"
-msgstr "������������� ���������"
-
-#: ../../keyboard.pm_.c:285
-msgid "Turkish (traditional \"F\" model)"
-msgstr "������ (������������� \"F\" �����)"
-
-#: ../../keyboard.pm_.c:286
-msgid "Turkish (modern \"Q\" model)"
-msgstr "������ (������� \"Q\" �����)"
-
-#: ../../keyboard.pm_.c:288
-msgid "Ukrainian"
-msgstr "����������"
-
-#: ../../keyboard.pm_.c:291
-msgid "US keyboard (international)"
-msgstr "US ��������� (���������������)"
-
-#: ../../keyboard.pm_.c:292
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "��j��������  \"number row\"QWERTY"
-
-#: ../../keyboard.pm_.c:293
-msgid "Yugoslavian (latin)"
-msgstr "������ (��������)"
-
-#: ../../keyboard.pm_.c:301
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:302
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:303
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:304
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:305
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:306
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:307
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:308
-#, fuzzy
-msgid "Left \"Windows\" key"
-msgstr "������ Windows �������"
-
-#: ../../keyboard.pm_.c:309
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "������ ������a��  %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "������ ���� ������� �������e\n"
-
-#: ../../modules.pm_.c:832
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "PCMCIA ������� �� ������� ���� �� 2.2 �������. ��������� 2.4 ������."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun ���"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "��������� PS2 ��� �� ��������"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 ������"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "��������� 2 ������� ���"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generic"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "������"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "��������"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "��������� 3 ������� ���"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC ������ (��������)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM ������"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (��������, ����� C7 ���)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "bus ���"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 ������a"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 ������a"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "�������"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "���� ���a"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "����� ��� �� ��������� ����"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "�a �� ����� �� ���������� ����"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "�������� ������ !"
-
-#: ../../my_gtk.pm_.c:666
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:701
-msgid "Finish"
-msgstr "���j"
-
-#: ../../my_gtk.pm_.c:701 ../../printerdrake.pm_.c:1590
-msgid "Next ->"
-msgstr "����e��  ->"
-
-#: ../../my_gtk.pm_.c:702 ../../printerdrake.pm_.c:1588
-msgid "<- Previous"
-msgstr "<- ���������"
-
-#: ../../my_gtk.pm_.c:1034
-msgid "Is this correct?"
-msgstr "�� �� �� ��� �������� ?"
-
-#: ../../my_gtk.pm_.c:1098 ../../services.pm_.c:222
-msgid "Info"
-msgstr "����"
-
-#: ../../my_gtk.pm_.c:1119
-msgid "Expand Tree"
-msgstr "������� ������"
-
-#: ../../my_gtk.pm_.c:1120
-msgid "Collapse Tree"
-msgstr "����� ������"
-
-#: ../../my_gtk.pm_.c:1121
-msgid "Toggle between flat and group sorted"
-msgstr "����j��: ����� ��� ������ ���������"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "�������j �� ��������"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"��j�e��� �a��� �� �������j� �a adsl je pppoe.\n"
-"�e�����, �����j� �������j� ��j� ������� pptp � ���� ��j� ������e dhcp.\n"
-"������� �� ����e ��j� je, ��������e '������� pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "������� dhcpd"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "������� pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "������� pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "��� dhcp ���j���� ������ �� ��������e ?���������� j� dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"��j� ����������� ��j���� ��e��� ������a.\n"
-"�� ���� �� ������� ���j ��� �������je."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:248
-msgid "Choose the network interface"
-msgstr "��������� ��e��� ������ej�"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"��������� ��e��� ������� ��j� ������ �� ��������� �� �������j� �� ��������"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "���� ��������� ������ �������"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:364
-msgid "Configuring network"
-msgstr "���������� �����"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"����� �������  ��� ����� ������ �� ����e\n"
-"'���� DHCP ������� �������j� ��� ����� �� �� ������.\n"
-"�a�� ��� ����� ����� �� ���� ���� ��� ��� ���.\n"
-"``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:369
-msgid "Host name"
-msgstr "��� �����:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:179
-#: ../../network/netconnect.pm_.c:206 ../../network/netconnect.pm_.c:229
-#: ../../network/netconnect.pm_.c:237
-msgid "Network Configuration Wizard"
-msgstr "�������� �� ���������� ����e"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "�������� ISDN �����"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "�������  ISDN ������a"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "����� j� ����� �a�� ISDN �������j� ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"���� ISDN ������������� ���� �����������?\n"
-"\n"
-"* ����� ����������� ������� isdn4net. ��� ������ ����� ������, ��� ��\n"
-"  ������������� �� ���������� �������� �� ���������, � ���� ����������.\n"
-"\n"
-"* ���� ������������� �� ������������� �� ��������, ������������,\n"
-"  ��� �� ���� ������ � �����.\n"
-"\n"
-"�� ������������� ����� (�������������) �������������.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "���� ������������� (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "����� ������������� (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN ������������a"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"��������� ���� �����j�e�a.\n"
-" ������� ��j� �� �����, ��������� Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "�������� ��������"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "�������� �������� (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "�������� �� ������ ����a"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"�������� �� ������� ����� \n"
-" ��� �-������ (��������� ����j�)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use?"
-msgstr "���� �������� ������ �� ��������e ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "�a��� ����� ������� �����?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "�� ����"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"������� ��a�� ISA �������, ��������� �� ����e��� ������ �� ������� ���� "
-"�������e.\n"
-"\n"
-"������� ��a�e PCMCIA �������, ������ �����  irq �  io �� �a�� �������.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "�������"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "�������"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card?"
-msgstr "���� �� ���� ISDN ������a ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"����������� je ISDN PCI ������a, ���������� ���a. ��������e j���� PCI "
-"������� �� ����e��� ������."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "��j� ����a���� ISDN PCI �������.��������� j���� �� ����e��� ������."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "��������� �������� ����  �� ���� �� ����� �������."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Dialup ������"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "��� ���������"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "���� ��������"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID �� ��������"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "�������� �� �������"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "�������� �� ���������"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "��� ������"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "���� DNS ������ (����ja)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "����� DNS ������ (����ja)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"������ �� �������������� ��� ��������������� �������j�."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"������ �������� �����������j�"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "�������� ��� ����������� �� ��������"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"���� �� ������ ����������� �� �������� ��� ��������������� �������j�"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "�������� ����� ����������� �� ��������"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "�������j"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "����������j"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "������ �������j�"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "�������� �������j� �  �����������ja"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "���� ����� �� �������� %s �������j�."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"���� ����� �� �������� %s ���������.\n"
-"\n"
-"\n"
-"���������� \"� ����\" �� ��������."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:256
-#: ../../network/netconnect.pm_.c:276 ../../network/tools.pm_.c:63
-msgid "Network Configuration"
-msgstr "���������� ����e"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"���� ���� ��� ������ ������ ���������j�, �a�� ����� j� �e� ���e���a "
-"���e���a.\n"
-"�������� ��  O�  ��������� �����������j� Network/Internet �������je, ��� "
-"cancel �a �� ������ ������� ����������j�.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"���������� � ������� �� ���e���a�� ��e��� �������je\n"
-"\n"
-"�a�� ����� �� ������������� �a�� ��������/��e��� �������j�.\n"
-"������� �� ������ ���� �������j�, ���������j�� ����j�.\n"
-
-#: ../../network/netconnect.pm_.c:171
-msgid "Choose the profile to configure"
-msgstr "��������� ������ �� ����������a�e"
-
-#: ../../network/netconnect.pm_.c:172
-msgid "Use auto detection"
-msgstr "������� ���� �������j�"
-
-#: ../../network/netconnect.pm_.c:179 ../../printerdrake.pm_.c:145
-msgid "Detecting devices..."
-msgstr "�������j��  ��e��je..."
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "Normal modem connection"
-msgstr "�������a �������a �������ja"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, c-format
-msgid "detected on port %s"
-msgstr "����������� �� ����� %s"
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-msgid "ISDN connection"
-msgstr "ISDN �������ja"
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-#, c-format
-msgid "detected %s"
-msgstr "����������� %s"
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-msgid "ADSL connection"
-msgstr "ADSL �������ja"
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-#, c-format
-msgid "detected on interface %s"
-msgstr "����������� �� ������ej�� %s"
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-msgid "Cable connection"
-msgstr "��������� �������ja"
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-msgid "cable connection detected"
-msgstr "����������� �� ��������� �������ja "
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "LAN connection"
-msgstr "LAN �������ja"
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "ethernet card(s) detected"
-msgstr "����������� ��e��� �������(�)"
-
-#: ../../network/netconnect.pm_.c:206
-msgid "Choose the connection you want to configure"
-msgstr "��������� ��� ��������� ���� ������ �� ���������"
-
-#: ../../network/netconnect.pm_.c:230
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"�� ��� �������� ���� ������ �� ����������� �� ��������.\n"
-"��������� ����� �� ��� ���� ������ �� ���������.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:231
-msgid "Internet connection"
-msgstr "�������� �������j�"
-
-#: ../../network/netconnect.pm_.c:237
-msgid "Do you want to start the connection at boot?"
-msgstr "�� �� ������ �� ������j��e ��������a�� ��� �����a�� ������a ?"
-
-#: ../../network/netconnect.pm_.c:251
-msgid "Network configuration"
-msgstr "���������� ����e"
-
-#: ../../network/netconnect.pm_.c:252
-msgid "The network needs to be restarted"
-msgstr "����� ���� ���� ������������"
-
-#: ../../network/netconnect.pm_.c:256
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"��j���� �� ������� ����� ���������a�� ��e�e?\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"���������, ��e��� � �������� �����������j� j� �a�����a.\n"
-"\n"
-"�����������j� �� ���� ���� ��������� �� ������.\n"
-
-#: ../../network/netconnect.pm_.c:270
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"���� �� �� �����, ������� �� �� ��������j��e X\n"
-"�����e�e �� �� ������� �������� �� �������� hostname-a."
-
-#: ../../network/netconnect.pm_.c:271
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"�������� �� �� �������� ����� �������������.\n"
-"��������� ����� ��������� ����� net_monitor ��� mcc. ������� ���� ��������� "
-"�� ����, ����� �� �������� �������������"
-
-#: ../../network/network.pm_.c:293
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"������e�e: ���j ������ j� �e� ��������� ������������ �� ��������a�e �a "
-"��������.\n"
-"���� ����������e �� �� �������� �������� �����.\n"
-"������ ���� ��j� ������ �� ��������� �����je�� �����������j�."
-
-#: ../../network/network.pm_.c:298
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"����� ������� IP ������������� �� ��� ������.\n"
-"����� ������ ����� �� ���� tavka ����� �� ���� ����� ���\n"
-"IP ������ (�� ������, 123.45.67.89)."
-
-#: ../../network/network.pm_.c:308 ../../network/network.pm_.c:309
-#, c-format
-msgid "Configuring network device %s"
-msgstr "���������� ������� ������� %s"
-
-#: ../../network/network.pm_.c:309
-#, c-format
-msgid " (driver %s)"
-msgstr "(���j��� %s)"
-
-#: ../../network/network.pm_.c:311 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP ������"
-
-#: ../../network/network.pm_.c:312 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "������ �����"
-
-#: ../../network/network.pm_.c:313
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:313
-msgid "Automatic IP"
-msgstr "���������� IP"
-
-#: ../../network/network.pm_.c:314
-#, fuzzy
-msgid "Start at boot"
-msgstr "��������� ��� �����a��"
-
-#: ../../network/network.pm_.c:335 ../../printerdrake.pm_.c:714
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ������ ����� �� ���� � ������� 1.2.3.4"
-
-#: ../../network/network.pm_.c:365
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"����� ������� ��� ����� ������, ��� �����, ��� IP ������ ��������\n"
-"'nameserver'-�. ��� ����� ����� ����� �� ���� ���� ������������� ��� �����,\n"
-"��� �� ��.  ``mybox.mylab.myco.com''.\n"
-"��� ������ �������� 'nameserver'-�, �������� �� ���� ������."
-
-#: ../../network/network.pm_.c:370
-msgid "DNS server"
-msgstr "DNS ������"
-
-#: ../../network/network.pm_.c:371
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (e.g. %s)"
-
-#: ../../network/network.pm_.c:373
-msgid "Gateway device"
-msgstr "Gateway �����j"
-
-#: ../../network/network.pm_.c:385
-msgid "Proxies configuration"
-msgstr "���e���a�� ������ja"
-
-#: ../../network/network.pm_.c:386
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:387
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:388
-msgid "Track network card id (useful for laptops)"
-msgstr "Track ������ ������� id (������� �� ������ ��������)"
-
-#: ../../network/network.pm_.c:391
-msgid "Proxy should be http://..."
-msgstr "Proxy ����� �� ���� http://..."
-
-#: ../../network/network.pm_.c:392
-msgid "Proxy should be ftp://..."
-msgstr "Proxy ����� �� ���� ftp://..."
-
-#: ../../network/tools.pm_.c:41
-msgid "Internet configuration"
-msgstr "������������� ��������a"
-
-#: ../../network/tools.pm_.c:42
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "�� �� ������ �� �� �������j��� �� �������� ���a?"
-
-#: ../../network/tools.pm_.c:46 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "������a�� �������j�..."
-
-#: ../../network/tools.pm_.c:56
-msgid "The system is now connected to Internet."
-msgstr "������ j� �������� ���������� �� ��������"
-
-#: ../../network/tools.pm_.c:57
-msgid "For security reason, it will be disconnected now."
-msgstr "�� ����������� �������, �� �� ���� ���� �������������."
-
-#: ../../network/tools.pm_.c:58
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"������� �� ������ ��j� ���������� �� ��������.\n"
-"�����j�� �� ��������� �����������j�."
-
-#: ../../network/tools.pm_.c:82
-msgid "Connection Configuration"
-msgstr "������������� �������� �������je"
-
-#: ../../network/tools.pm_.c:83
-msgid "Please fill or check the field below"
-msgstr "����� ��� �� �������� ��� ���a���� ���� �����"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ ������e"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "(DMA) ������e"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr " IO ������e"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr " IO_0 ������e"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 ������e"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "�a� ����� ���j �������a"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "��� �����j���� (���. provider.net)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "���� �������� �����j���a"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "�����j����� dns 1 (�������)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "�����j����� dns 2 (�������)"
-
-#: ../../network/tools.pm_.c:95
-msgid "Choose your country"
-msgstr "������� ����� �����"
-
-#: ../../network/tools.pm_.c:96 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "��� �� ���a�e"
-
-#: ../../network/tools.pm_.c:97 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "������ ��������� "
-
-#: ../../network/tools.pm_.c:98 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "����� ����� ��������� (� ���.)"
-
-#: ../../network/tools.pm_.c:99 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "�����a�� �� �a��� (���������� ���)"
-
-#: ../../network/tools.pm_.c:100 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "������� �� �a���"
-
-#: ../../network/tools.pm_.c:118
-msgid "United Kingdom"
-msgstr ""
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "��������� ���� ������: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Extended �������j� ��j� �������� �� ���j ���������"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"����� �������� � ����� ������ ��������� ��� �� �� ���� ��������.\n"
-"������ ������ �� �� �������� �������� ��������� ���� �� �������� ����\n"
-"�� extended ���������"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "�������� �� �������e %s ���� ������: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "���� backup-����a �������a"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "������ ��� ����� � �������a %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"�e��� ���� �� �e���� �� �a��� ���� ������. \n"
-"���� ����������� �������� ��j� ������. \n"
-"�� ��a�� �� ��� ��� �� ������ �� ����� �� �������� ��� ����e"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "���� �����"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "�a���"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "����� ����"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "����"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "����a"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - ����� Unix-�� ������ �� ��������"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR ���� ����������"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer �����"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - �������, ����� �� ������"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "�������  �������"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "������� �����a�"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "������� ��� ������� CUPS ������"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:736
-msgid "Printer on remote lpd server"
-msgstr "������� ��� ������� lpd ������"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "��e��� ������� (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "������� �� SMB/Windows 95/98/NT �������"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "������� �� NetWare �������"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:740
-msgid "Enter a printer device URI"
-msgstr "������� URI �� �������"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "����� ������� � �������"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2733
-msgid "Unknown model"
-msgstr "��������� �����"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "������� ��������"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "������� �����a��"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " �� ���������� ����� \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB ������� \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", �����-������������ ������ �� ���������� ����� \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", �����-������������ ������ �� USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", �����-������������� ������ �� HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", �����-������������ ������"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", ������� �� %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "�� LPD ������r \"%s\", ������� \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP ���� \"%s\", ���� %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "�� Windows ������ \"%s\", share \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "�� Novell ������ \"%s\", ������� \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", �������� ������� %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1138
-msgid "Raw printer (No driver)"
-msgstr "Raw ������� (��� ��������)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(�� %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(�� ���� ������)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "�� CUPS ������ \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2394
-#: ../../printerdrake.pm_.c:2405 ../../printerdrake.pm_.c:2621
-#: ../../printerdrake.pm_.c:2673 ../../printerdrake.pm_.c:2700
-#: ../../printerdrake.pm_.c:2870 ../../printerdrake.pm_.c:2872
-msgid " (Default)"
-msgstr " (�������������)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "����� ����������� ��������"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "���� �� ������� �������?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"�������� �� �������� CUPS ������� ������ �� �� �� ���� ��������; ��� "
-"�������� �� ���� ���������� �����������."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2457
-msgid "CUPS configuration"
-msgstr "CUPS �������������"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2458
-msgid "Specify CUPS server"
-msgstr "�������� CUPS ������"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"�� �� ������ ������� ���������� �� �������� CUPS ��������� �� ����� �������� "
-"������� ������ ����� �� ����������; CUPS ������� ���������� ������������ "
-"���� ������� ������ ����������. ��� �������� ���� �� �������� ������� ����� "
-"������ �� ��������� � \"Remote printers\" ����  ������� ������� Printerdrake-"
-"�. ���� ��� CUPS ������ ���� �� �������� ������, ������ ����� CUPS ��������� "
-"IP ������ � ������� ���� ����� �� �� ������ ����������� � �������� �� "
-"�������, ��� ��� ������ �� ���� �������� ��������."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"������ CUPS �� ���������� ������� �� ������ ������� ��������, ���� �� ������ "
-"���������� ���������� �� CUPS ��������� �� ����� �������� �����. ������� ��� "
-"�� ����������� ���� �����, ��������� \"���������� CUPS �������������\" � "
-"�������� ��� ���� /etc/cups/cupsd.conf �����. �� ���������� �� ����� ���� "
-"������������ CUPS (�������: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ������ ����� �� ������� ��� ���. 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:864
-msgid "The port number should be an integer!"
-msgstr "���j ����� �� ������ �� ���� ���j !"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "SMB ������ IP:"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:857
-msgid "Port"
-msgstr "����"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "���������� CUPS �������������"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "��������� �������"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2440
-#: ../../printerdrake.pm_.c:2559
-msgid "Add a new printer"
-msgstr "������� ���� �������"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"���������� � �������� �� ������������� ��������\n"
-"\n"
-"���� �������� �� ��� ��������� �� ����������� ������� ��� ������� �������� "
-"�� ��������� ��� � ������ ������ �� �����.\n"
-"\n"
-"�� ��� �� ���� ������� ��� ��������� ����������� �� ���������� �������� � "
-"�������� ������� ���� ����y���� ����������, ������� ��������, � �������� "
-"��������� ��������."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "������� �������"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"����������� � �������� �� ������������� ��������\n"
-"\n"
-"���� �������� �� ��� ������ �� ����������� ��� �������(�) �������(�) �� ���� "
-"�������.\n"
-"\n"
-"���������� ��� �������(�) � ������� � �������� ��(��). �������� �� on "
-"\"�������\" ���� ������ �������, � \"�������\" ���� �� ������ �� ���������� "
-"�������(�).\n"
-"\n"
-"��������� �� ���� �������� ���� �� �� ��������� ����� ����-���������, "
-"���������  \"����-��������� ��������\" �� �� ����� ����������� �������. "
-"��������� \"������� ���\" � printerdrake ���� ������  �� ���������������� �� "
-"�������� �������� ���� ���� ���������� ��������."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "����-��������� ��������"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"���������, ��� ������� �� ���� ���������� � �������!\n"
-"\n"
-"������ �� �������� ��������� \"�������\" ������� � ����� ���������� (������ "
-"� \"����\" ������).\n"
-"\n"
-"������� ������ �� ������, �������� ��� ��������� ��� ��������, ��� ������ �� "
-"��������� default ������ (�����, �������� ��������, ...), ��������� \"�������"
-"\" � \"�������\" ������� Mandrake ���������� ������."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "����-��������� ��������"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake �� � ���������� �� ����-��������� ��� ������� ����� ��������� "
-"��� USB ������� ������ ���, ��� ������ �� ��� �� ����-��������� ���� "
-"�������¸ ��� ���µ� � ¾ ���� ����¸ ��µ���� İ�� ���µ��! ������ ��� ��� "
-"��  ����²��� �����!\n"
-"\n"
-"�� �� ������ �� ����-����������� �������?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "������� ���� �������j�"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "��������� ��������� �����"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "���������� %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "������� �� ���������� ����� \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB ������� \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"���� �������� ������� �������! �� �� ����� ����������� ������� ������� ��� "
-"�������/��� ����� � ������ �� ���� (��������� �������: /dev/lp0, /dev/"
-"lp1, ..., �� ������������ LPT1:, LPT2:, ..., ���� USB �������: /dev/usb/lp0, "
-"����� USB �������: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "������ ����� ������ ��� ��� �����!"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "���� �������� ������� �������!"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"������ �������� ���� ���� ����������� ����� ����������� �������. ��������� "
-"\"�������\" � ���� \"�������\" � Mandrake ���������� ������."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"�� �� ����������� ������ ��������, �������� \"�������\", ������� �� "
-"\"������� ���\", � �������� \"������� ���� �������\" ������."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"��������� ������� �� ����-����������, � ������� �� ���� ���� ���� ������ �� "
-"��������, ������� ���/��� ����� ������� � ������ �� ����"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"���� �� ������ ����� ���� ����-������������ ��������. ��������� ������� ���� "
-"������ ��� ������� ������ ����� ������� � ������ �� ����"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"��������� ������� �� ����-����������. ���������� �������� �� ���� ������� "
-"����������. ������� ��� ������� ���� �������� ���������� ��� ������ �� ���� "
-"���������� �������, �������� \"����� �������������\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"���� �� ������ ����� ���� ����-������������ ��������. ��������� ������� ���� "
-"������ �� ��������. ���������� �������� �� ���� ������� ����������. ������� "
-"�� ������� ���� �������� ���������� ��� ���� ������ �� �� ���� ��������, "
-"�������� \"����� �������������\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"��������� ���� �� ���� �� ��� ������� ������� ��� ������� ���/��� ����� "
-"������� � ������ �� ����"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "��������� ���� �� ���� �� ��� ������� �������."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (��������� �������: /dev/lp0, /dev/lp1, ..., ����������� �� LPT1:, "
-"LPT2:, ..., ���� USB �������: /dev/usb/lp0, ����� USB �������: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "������ �������/����� �������/������!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "����� ������������a"
-
-#: ../../printerdrake.pm_.c:467
-#, fuzzy
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, LaserJet "
-"1100/1200/1220/3200/3300 with scanner), an HP PhotoSmart P100 or 1315 or an "
-"HP LaserJet 2200?"
-msgstr ""
-"�� �� �� ��� ������� �����-������������ ������ �� HP (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 �� ��������)?"
-
-#: ../../printerdrake.pm_.c:484
-msgid "Installing HPOJ package..."
-msgstr "���������� HPOJ �����..."
-
-#: ../../printerdrake.pm_.c:489
-msgid "Checking device and configuring HPOJ..."
-msgstr "���������� ������ � ��������� HPOJ ..."
-
-#: ../../printerdrake.pm_.c:507
-msgid "Installing SANE package..."
-msgstr "���������� SANE �����..."
-
-#: ../../printerdrake.pm_.c:519
-msgid "Scanning on your HP multi-function device"
-msgstr "�������� �� ����� HP �����-������������� �������"
-
-#: ../../printerdrake.pm_.c:536
-msgid "Making printer port available for CUPS..."
-msgstr "������� ���� �������� �� CUPS ..."
-
-#: ../../printerdrake.pm_.c:546 ../../printerdrake.pm_.c:1020
-#: ../../printerdrake.pm_.c:1134
-msgid "Reading printer database..."
-msgstr "�������� CUPS ���� ��������..."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote lpd Printer Options"
-msgstr "������ �� ������� lpd"
-
-#: ../../printerdrake.pm_.c:627
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"�� �� ��������� ������� lpd �������, ������ �� ���������� ��� ����� �� "
-"������ �� �������� ��� � ��� �������� �� ��� �������."
-
-#: ../../printerdrake.pm_.c:628
-msgid "Remote host name"
-msgstr "��� �������� host-a"
-
-#: ../../printerdrake.pm_.c:629
-msgid "Remote printer name"
-msgstr "Ime u������ �����a�a"
-
-#: ../../printerdrake.pm_.c:632
-msgid "Remote host name missing!"
-msgstr "��������� ��� �������� host-a!"
-
-#: ../../printerdrake.pm_.c:636
-msgid "Remote printer name missing!"
-msgstr "��������� ��� �������� ��������!"
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT)  ������ ��������"
-
-#: ../../printerdrake.pm_.c:705
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"�� ����� ����� �� �������� �� SMB ��������, ����� �� ��������\n"
-"��� ����� (���� ���� ���� ���� ��� TCP/IP ��� ������);\n"
-"IP ������ ����������� �������; ������ ��� �������� ���� ����������,\n"
-"��� � �������� ���������� ����� � �������."
-
-#: ../../printerdrake.pm_.c:706
-msgid "SMB server host"
-msgstr "SMB ������  host:"
-
-#: ../../printerdrake.pm_.c:707
-msgid "SMB server IP"
-msgstr "SMB ������ IP:"
-
-#: ../../printerdrake.pm_.c:708
-msgid "Share name"
-msgstr "������ (��j�������)  ��e :"
-
-#: ../../printerdrake.pm_.c:711
-msgid "Workgroup"
-msgstr "����� �����(Workgroup):"
-
-#: ../../printerdrake.pm_.c:718
-msgid "Either the server name or the server's IP must be given!"
-msgstr "������ ���� ��� ��� ������� ��� ����� IP!"
-
-#: ../../printerdrake.pm_.c:722
-msgid "Samba share name missing!"
-msgstr "��������� ������ ��� �� Samba-�!"
-
-#: ../../printerdrake.pm_.c:727
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:728
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:738
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:741
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-msgid "NetWare Printer Options"
-msgstr "NetWare ������ ��������"
-
-#: ../../printerdrake.pm_.c:804
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"�� ����� ����� �� �������� �� NetWare �������, ����� �� �������� ���  "
-"NetWare ������� �� ������� (���� ���� ���� ���� ��� TCP/IPhostname! );��  "
-"��� '����' �������� ���� ����������,��� � �������� ���������� ����� � "
-"�������."
-
-#: ../../printerdrake.pm_.c:805
-msgid "Printer Server"
-msgstr "������ ��������:"
-
-#: ../../printerdrake.pm_.c:806
-msgid "Print Queue Name"
-msgstr "Print Queue ���:"
-
-#: ../../printerdrake.pm_.c:811
-msgid "NCP server name missing!"
-msgstr "��������� ��� NCP �������!"
-
-#: ../../printerdrake.pm_.c:815
-msgid "NCP queue name missing!"
-msgstr "��������� ��� �� NCP ���!"
-
-#: ../../printerdrake.pm_.c:854
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket ������ ��������"
-
-#: ../../printerdrake.pm_.c:855
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"�� �� �������� �� TCP ��� socket �������, ������ �� ���������� ��� ����� �� "
-"�������� �� (������) ���� �����. �� HP JetDirect ��������� ���� ����� �� "
-"������ 9100, � �� ������ ��������� ���� ���� ���������. ���������� ������� "
-"���� ��� ������ �� �������."
-
-#: ../../printerdrake.pm_.c:856
-msgid "Printer host name"
-msgstr "��� ����� �� �������"
-
-#: ../../printerdrake.pm_.c:860
-msgid "Printer host name missing!"
-msgstr "��������� ��� �����!"
-
-#: ../../printerdrake.pm_.c:889 ../../printerdrake.pm_.c:891
-msgid "Printer Device URI"
-msgstr "��e��j �� ������� URI"
-
-#: ../../printerdrake.pm_.c:890
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"������ �������� �������� URI �� ������� ��������. URI ���� ���������� ��� "
-"CUPS ��� Foomatic �������������. ��������� �� ���� ��� URI ������ ��������."
-
-#: ../../printerdrake.pm_.c:905
-msgid "A valid URI must be entered!"
-msgstr "������ ����� ������� URI!"
-
-#: ../../printerdrake.pm_.c:1006
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"����� ������� ���� �� ��� ��� (�� ������ \"�������\"). ���� �� ���� � "
-"�������� �� ������ ���� ��������. �� �� ���� ������� �������� �� ���������."
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Name of printer"
-msgstr "��� �������a"
-
-#: ../../printerdrake.pm_.c:1008
-msgid "Description"
-msgstr "����"
-
-#: ../../printerdrake.pm_.c:1009
-msgid "Location"
-msgstr "������ja"
-
-#: ../../printerdrake.pm_.c:1023
-msgid "Preparing printer database..."
-msgstr "��������� ���� �������� �� ��������..."
-
-#: ../../printerdrake.pm_.c:1114
-msgid "Your printer model"
-msgstr "��� ����� ��������"
-
-#: ../../printerdrake.pm_.c:1115
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake �� ���������� ��� ������ ��������� ���������������� �������� "
-"���������� � ������� ���� �������� �� �� �������� ������������. ���� ����� "
-"���� ���� ��������, ������� ���� �� ��� ������� �������� ������ � ���� "
-"��������. ���� ��������� �� �� ����� �������� � �������� \"���� ����� �� "
-"��������\" ������� ����� � ������� ����, �������� \"����� ��������� �����\" "
-"�� �� ����� �� ���� ��������� ������� �� �������� ������.\n"
-"\n"
-"�� ��� ������� Printerdrake �� ��������:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1120 ../../printerdrake.pm_.c:1123
-msgid "The model is correct"
-msgstr "���� ����� �� �����"
-
-#: ../../printerdrake.pm_.c:1121 ../../printerdrake.pm_.c:1122
-#: ../../printerdrake.pm_.c:1125
-msgid "Select model manually"
-msgstr "����� ��������� �����"
-
-#: ../../printerdrake.pm_.c:1141
-msgid "Printer model selection"
-msgstr "��������� ������ ��������"
-
-#: ../../printerdrake.pm_.c:1142
-msgid "Which printer model do you have?"
-msgstr "���� ����� �������� �����?"
-
-#: ../../printerdrake.pm_.c:1143
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"��������� �� �� �� Printerdrake ����-���������� ��� ������� ��������. "
-"��������� ����� ����� �� ����� ���� ������ ����� �� �������� ��������� "
-"������ ��� �� \"Raw �������\"."
-
-#: ../../printerdrake.pm_.c:1146
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"������� �� ��� ������� �� ������ �� �����, ��������� ������������ "
-"(���������� ������� �� �������) ���  ������ ����."
-
-#: ../../printerdrake.pm_.c:1222
-msgid "OKI winprinter configuration"
-msgstr "OKI win ������� �������������"
-
-#: ../../printerdrake.pm_.c:1223
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"����� �� ��������  OKI �������� win �������. ��� ��������\n"
-"������� ����� ��������������� ������������� ��������� � ���� ���� ��� ���� "
-"���� ���� �� �������� �� ���� ��������� ����. ���� �� ��� ������� ������� �� "
-"����� ���� ��� �� ������ �������� ������� �� ���� ��������� ���� ��� ���� "
-"��������� ���� �������� ��� ��� ������� ���� ������. �������� �� ��� ��� "
-"��������� �� ���� ���������� �� ������ ��������."
-
-#: ../../printerdrake.pm_.c:1266 ../../printerdrake.pm_.c:1293
-msgid "Lexmark inkjet configuration"
-msgstr "������������� Lexmark inkjet ��������"
-
-#: ../../printerdrake.pm_.c:1267
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"�������� �� inkjet �������� ���� �� ��������� Lexmark ���� ���������� "
-"������� ��������, � �� � �������� �� �������� �������� ��� ����� ���������. "
-"�������� ��� ������� �� ������� ���� ��� �� �������� �� ������ �� ���� �� "
-"�������."
-
-#: ../../printerdrake.pm_.c:1294
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"�� �� ����� �� �������� �� ����� Lexmark inkjet �������� ������ �� ����� "
-"�������� ���� �� ������� Lexmark (http://www.lexmark.com/). ����� �� US ���� "
-"� �������� �� ������ \"��������\". ����� ���� ��������� ��� ����� � "
-"���������� ������, � ����� ������� \"Linux\". �������� �� ��������� � RPM "
-"������ ��� shell ������� �� ������������� ��������� ������������. �� ������ "
-"�� d������ ��� �������������. ���������� Cancel ����� ����� ������� � "
-"�������. ���� ���������� printhead alignment �������� �� \"lexmarkmaintain\" "
-"� �������� ������ �� ������� ����� �� ���� ���������."
-
-#: ../../printerdrake.pm_.c:1510
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"default ������ �� �������\n"
-"\n"
-"��������� �� �� �� �������� ������ � ����� �����/��� �������� (������� �� "
-"��������) ��� � ���������� ������������� �� �������� �������� (��������, "
-"duplex ��������, ������� ������) �������� ��������. ������ �� ��� �� ��� "
-"������� ��������� ������/���������� ������ �������� ���� ���� ���������� "
-"��������."
-
-#: ../../printerdrake.pm_.c:1519
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "������ %s ���� ���� ����!"
-
-#: ../../printerdrake.pm_.c:1523
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "������ %s ���� ���� ����!"
-
-#: ../../printerdrake.pm_.c:1528
-#, c-format
-msgid "Option %s out of range!"
-msgstr "������ %s ��� ������!"
-
-#: ../../printerdrake.pm_.c:1567
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"�� �� ������ �� �������� ���� ������� (\"%s\")\n"
-"��� default �������?"
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Test pages"
-msgstr "��������� ��������"
-
-#: ../../printerdrake.pm_.c:1585
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"��������� ���� ������� ���� ������ �� ��������.\n"
-"��������: ������� �� ���� � ���� ���� �������� ���� ���� �������� ����� ���� "
-"������� �� �� �� ��������� � �������� �������� �� ���� �������� �� ��� ���� "
-"�� ���������. � ������ ��������� ������� �� �� ��������� ���������� ���� "
-"��������."
-
-#: ../../printerdrake.pm_.c:1589
-msgid "No test pages"
-msgstr "��� ���� ��������"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Print"
-msgstr "�������"
-
-#: ../../printerdrake.pm_.c:1592
-msgid "Standard test page"
-msgstr "���������� ���� ��������"
-
-#: ../../printerdrake.pm_.c:1595
-msgid "Alternative test page (Letter)"
-msgstr "������������ ���� ��������"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Alternative test page (A4)"
-msgstr "������������� ���� �������� (A4)"
-
-#: ../../printerdrake.pm_.c:1600
-msgid "Photo test page"
-msgstr "���� ���� ��������"
-
-#: ../../printerdrake.pm_.c:1604
-msgid "Do not print any test page"
-msgstr "����� �� ������� ���� ���� ���� ��������"
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1749
-msgid "Printing test page(s)..."
-msgstr "������� ���� �����(���)�..."
-
-#: ../../printerdrake.pm_.c:1637
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"���� �����(���)� �� ������� ������� ������.\n"
-"�� ���� ������� �� ����� �������� ������ ��������.\n"
-"������ ��������:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1641
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"���� �����(���)� �� ������� ������� ������.\n"
-"�� ���� ������� �� ����� �������� ������ ��������.\n"
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Did it work properly?"
-msgstr "�� �� ���� ��������?"
-
-#: ../../printerdrake.pm_.c:1669 ../../printerdrake.pm_.c:2735
-msgid "Raw printer"
-msgstr "Raw �������"
-
-#: ../../printerdrake.pm_.c:1687
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"�� �� �������� ���� �� �������� ������ (��� ������� ���������) ������ ��� "
-"��������� ������� \"%s <����>\" ��� �������� ���� �� ��������: \"xpp <����>"
-"\" ��� \"kprinter <����>\". �������� ����� ��� ������������ �� ��������� "
-"������� � �������� ������ ����� ����.\n"
-
-#: ../../printerdrake.pm_.c:1689
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"��� ������� ������ ������ ��������� � ���� \"������� �� ��������\" �������� "
-"�� �������� � ����� ����� ����������, ��� ���� ������� �� ���������� ��� "
-"����� ��� ���� �������� ���� ���������� �� ���� ��������.\n"
-
-#: ../../printerdrake.pm_.c:1692 ../../printerdrake.pm_.c:1708
-#: ../../printerdrake.pm_.c:1718
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"������� \"%s\" ������ ��������� ������ ������ �� ��������� ����� ��������. "
-"����������� ������� ������ ����� � �������� ������, e. g. \"%s <����>\". "
-
-#: ../../printerdrake.pm_.c:1695 ../../printerdrake.pm_.c:1734
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"�� �� ����� ���� �� ��� ������ �������� �� ������ ������� ���������� ����� "
-"���� �� ���� ��������� ��� �������� �� ������ \"����� ������ �� ��������\".%"
-"s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1698
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"���� �� ������ ����� ��������� ������ �� �������� �� ������ �������:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"�� �� �������� ���� �� �������� ������ (������� ���������) ��������� ������� "
-"\"%s <����>\".\n"
-
-#: ../../printerdrake.pm_.c:1705 ../../printerdrake.pm_.c:1715
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"��� ������� ��� �� �������� � � ���� \"������ �� ��������\" �������� �� "
-"�������� � ������ ����������. ��� � ��� ������� ������� �� ��������� ��� "
-"����� ��� �� ��� ��� �������� �� ������ ����������.\n"
-
-#: ../../printerdrake.pm_.c:1710 ../../printerdrake.pm_.c:1720
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"�� �� ������ ����� ��������� ������ �� �������� ������� �������� �� ������ "
-"\"����� ������ ��������\"."
-
-#: ../../printerdrake.pm_.c:1723
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"�� �� �������� ���� �� �������� ������ (������� ���������) ��������� ������� "
-"\"%s <����>\" ��� \"%s <����>\".\n"
-
-#: ../../printerdrake.pm_.c:1727
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"������ ������ �� ��������� � �������� ��������� \"xpdq\" �� ������ �� "
-"���������� ������� ��������.\n"
-"��� ��������� KDE ��� ������� �������� ����� \"������� �����\", ������� �� "
-"��������, �������� �� \"����°�� �������!\",���� ��������� ��� ������� "
-"�������� ����� �������� �� ��� ������. ��� �� �� ������ ������� ���� �� "
-"������� �����.\n"
-
-#: ../../printerdrake.pm_.c:1731
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"������� \"%s\" � \"%s\" ������ ����������� ������ ������ �� ��������� ����� "
-"��������. ����������� ������� ������ ������ � �������� ������, e. g. \"%s "
-"<����>\".\n"
-
-#: ../../printerdrake.pm_.c:1740 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:1747 ../../printerdrake.pm_.c:1748
-#: ../../printerdrake.pm_.c:2719 ../../standalone/drakbackup_.c:743
-#: ../../standalone/drakbackup_.c:2448 ../../standalone/drakfont_.c:580
-#: ../../standalone/drakfont_.c:792
-msgid "Close"
-msgstr "�������"
-
-#: ../../printerdrake.pm_.c:1743 ../../printerdrake.pm_.c:1755
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "�������/�������� �� \"%s\""
-
-#: ../../printerdrake.pm_.c:1744 ../../printerdrake.pm_.c:1756
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "������� �� �������� \"%s\""
-
-#: ../../printerdrake.pm_.c:1746
-msgid "Print option list"
-msgstr "����� �� �������� �� �������"
-
-#: ../../printerdrake.pm_.c:1768
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"��� HP �����-������������ ������ �� ���������� ������� �� �� ����� �� "
-"�������. ���� ������ �� ��������� �� \"scanimage\" (\"scanimage -d hp:%s\" "
-"�� �� �������� ������ ���� ����� ���� �� ������) �� �������� ������ ��� �� "
-"��������� ������������ \"xscanimage\" ��� \"xsane\". ������� ��������� the "
-"GIMP, ������ ������ ��������� ������� ������������ ������ � \"����e\"/"
-"\"Acquire\" ������. ���������� � \"man scanimage\" � \"man sane-hp\" � "
-"��������� ������ �� ���� �����������.\n"
-"\n"
-"�� ������� \"scannerdrake\" �� ���� ������!"
-
-#: ../../printerdrake.pm_.c:1775
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"��� HP �����-������������ ������ �� ���������� ������� �� �� ��� � "
-"���������� �� �������. ���� ������ �� ��������� �� �������� ������ ��  "
-"\"ptal-hp %s scan ...\". ��������� �� ��������� ���������� ��� �� GIMP-� "
-"���� �������� ��� ���� �� ��� ������. ���� ����������� ������ ������� �  \"/"
-"usr/share/doc/hpoj-0.8/ptal-hp-scan.html\" ����� �� ����� �������. ������� "
-"����� HP LaserJet 1100 ��� 1200 ������ ��������� ���� ��� ����� ����������� "
-"������ ������.\n"
-"\n"
-"�� ������� \"scannerdrake\" �� ���� ������!"
-
-#: ../../printerdrake.pm_.c:1797 ../../printerdrake.pm_.c:2224
-#: ../../printerdrake.pm_.c:2488
-msgid "Reading printer data..."
-msgstr "�������� ������� �� ������� ..."
-
-#: ../../printerdrake.pm_.c:1817 ../../printerdrake.pm_.c:1845
-#: ../../printerdrake.pm_.c:1880
-msgid "Transfer printer configuration"
-msgstr "������������� �� �������� ��������"
-
-#: ../../printerdrake.pm_.c:1818
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"������ �������� ������������� �������� ���� ��� �������� �� spooler %s to %"
-"s, ��� �������� spooler. ��� �������������� ������ (��� ��������, ����, "
-"��������, ��� ���������, � default ������) �� ���� ��������, ��� �� � "
-"������� ��������.\n"
-"�� ��� queues �� ���� ���� ��������� ���� �������� �������:\n"
-
-#: ../../printerdrake.pm_.c:1821
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS �� �������� �������� �� Novell ��������� ��� ���������� ���� ���� "
-"������� � ��������-��������� �������.\n"
-
-#: ../../printerdrake.pm_.c:1823
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ �������� ���� ������� ��������, ������� LPD ��������, � Socket/TCP "
-"��������.\n"
-
-#: ../../printerdrake.pm_.c:1825
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD � LPRng �� ���������� IPP ��������.\n"
-
-#: ../../printerdrake.pm_.c:1827
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"��� �������, queues ���� �� �������� �� ���� ��������� ���  \"foomatic-"
-"configure\" �� ���� ���� ���������."
-
-#: ../../printerdrake.pm_.c:1828
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"������, �������� ������������� �� PPD ��������� ���� ������ �� ����������� "
-"��� �� �������� CUPS ���������� �� ���� ���� ���������."
-
-#: ../../printerdrake.pm_.c:1829
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"�������� �������� ���� ������ �� ��������� � �������� �� \n"
-"\"�������\"."
-
-#: ../../printerdrake.pm_.c:1832
-msgid "Do not transfer printers"
-msgstr "�� �������� ��������"
-
-#: ../../printerdrake.pm_.c:1833 ../../printerdrake.pm_.c:1850
-msgid "Transfer"
-msgstr "�������"
-
-#: ../../printerdrake.pm_.c:1846
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"������� \"%s\" ��� ������� ���  %s. \n"
-"������ �� \"�������\" �� �� ������ ����� ������.\n"
-"������ ������� � ���� ��� ��� ���������� ���� �������."
-
-#: ../../printerdrake.pm_.c:1854
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "��� �����a�� ����� �� ������ ���� ����a, ���j��� � underscore"
-
-#: ../../printerdrake.pm_.c:1859
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"������� \"%s\" ��� �������,\n"
-"�� �� ������� ������ �� ������ ������� ������ ������?"
-
-#: ../../printerdrake.pm_.c:1867
-msgid "New printer name"
-msgstr "���� ��� ��������"
-
-#: ../../printerdrake.pm_.c:1870
-#, c-format
-msgid "Transferring %s..."
-msgstr "������������ %s ..."
-
-#: ../../printerdrake.pm_.c:1881
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"��������� ��� ���� ����� default ������� (\"%s\"), �� �� ����� �� ���� "
-"������ default ������� ��� ����� �������� �� �������� %s?"
-
-#: ../../printerdrake.pm_.c:1890
-msgid "Refreshing printer data..."
-msgstr "��������� �������� � ��������..."
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1969
-#: ../../printerdrake.pm_.c:1981
-msgid "Configuration of a remote printer"
-msgstr "���������� �������� ��������"
-
-#: ../../printerdrake.pm_.c:1899
-msgid "Starting network..."
-msgstr "��������� ����� ..."
-
-#: ../../printerdrake.pm_.c:1933 ../../printerdrake.pm_.c:1937
-#: ../../printerdrake.pm_.c:1939
-msgid "Configure the network now"
-msgstr "������ ����� ����"
-
-#: ../../printerdrake.pm_.c:1934
-msgid "Network functionality not configured"
-msgstr "������ �������������� ���� ��������"
-
-#: ../../printerdrake.pm_.c:1935
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"����� �� �������� ������� �������. �� �� ��� �� �������� ������ �������, ��� "
-"���� ����� ���� ��� ��������. ������� ��������� ��� ����� �������������, "
-"������ ���� �� ��������� ������� ���� ���� ����������. ���� ������ �� "
-"���������?"
-
-#: ../../printerdrake.pm_.c:1938
-msgid "Go on without configuring the network"
-msgstr "������� ���� ��� ���������� �����"
-
-#: ../../printerdrake.pm_.c:1971
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"������ ������������� ���� �� �������� ����� ���������� �� ���� ���� �� �� "
-"�������. ��������� �� �� �� ����� �������� ����� �������� ������� � "
-"��������� ������������� ��������� Mandrake C��������� ������, ������� "
-"\"����� & ��������\"/\"����������\", � ����� ���� �������� �������, ������ "
-"���������� Mandrake ���������� ������, ������� \"�������\"/\"�������\""
-
-#: ../../printerdrake.pm_.c:1972
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"������ ������� ���� �������� � �� ���� �� �� ��������. ��������� ���� "
-"������������� � ���� ���������� ����������. ���� �������� ������ �� �������� "
-"������� �������."
-
-#: ../../printerdrake.pm_.c:1982
-msgid "Restarting printing system..."
-msgstr "����������� ������ �� �����a�� ..."
-
-#: ../../printerdrake.pm_.c:2020
-msgid "high"
-msgstr "������"
-
-#: ../../printerdrake.pm_.c:2020
-msgid "paranoid"
-msgstr "����������"
-
-#: ../../printerdrake.pm_.c:2021
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "���������� ������ �� �������� � %s ����������� �����"
-
-#: ../../printerdrake.pm_.c:2022
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"���� ����� �� ����������� ������ �� �������� %s �� ������� ���� �� ������ � %"
-"s ����������� �����.\n"
-"\n"
-"���� ������ �� �������� ������� ����� (���������� ������) ���� ���� �� "
-"������� �������� � ������� ����. ���� ����� �� ������ �������� ����� "
-"�������� ������ ����� ����� �� �� ���� �������� ��������. ���� ���� ���� ��� "
-"��������� ������ �� �������� �� default-� �� ���� ����������� �����.\n"
-"\n"
-"�� �� ������� ������ �� �������� �������� �� ���� ������?"
-
-#: ../../printerdrake.pm_.c:2054
-msgid "Starting the printing system at boot time"
-msgstr "������� ������ �� �������� ��� ������� �������"
-
-#: ../../printerdrake.pm_.c:2055
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"������ �� �������� (%s)���� ���� ���������� �������� ��� �������� ������.\n"
-"\n"
-"������ �� ���������� �������� ��������� �������� �� ����� ���� ����������, "
-"���� ���� ��� �� ������ �� �������� ��������� �� ������.\n"
-"\n"
-"�� �� ������ ������ �� ���������� ���������� ������ �� �������� ?"
-
-#: ../../printerdrake.pm_.c:2078 ../../printerdrake.pm_.c:2116
-#: ../../printerdrake.pm_.c:2146 ../../printerdrake.pm_.c:2179
-#: ../../printerdrake.pm_.c:2284
-msgid "Checking installed software..."
-msgstr "���������� ����������� �������..."
-
-#: ../../printerdrake.pm_.c:2120
-msgid "Removing LPRng..."
-msgstr "������� LPRng..."
-
-#: ../../printerdrake.pm_.c:2150
-msgid "Removing LPD..."
-msgstr "������� LPD..."
-
-#: ../../printerdrake.pm_.c:2208
-msgid "Select Printer Spooler"
-msgstr "��������� Spooler �� �������"
-
-#: ../../printerdrake.pm_.c:2209
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "���� ������ �� �����a�� (spooler) ������ �� ��������e ?"
-
-#: ../../printerdrake.pm_.c:2242
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "��������� ������� \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2255
-msgid "Installing Foomatic..."
-msgstr "���������� Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2312 ../../printerdrake.pm_.c:2351
-#: ../../printerdrake.pm_.c:2736 ../../printerdrake.pm_.c:2806
-msgid "Printer options"
-msgstr "������ ��������"
-
-#: ../../printerdrake.pm_.c:2321
-msgid "Preparing PrinterDrake..."
-msgstr "��������� PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2338 ../../printerdrake.pm_.c:2893
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "��������� ������� \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2358
-msgid "Would you like to configure printing?"
-msgstr "�� �� ����� �� �������� �������?"
-
-#: ../../printerdrake.pm_.c:2370
-msgid "Printing system: "
-msgstr "������ �� ��������: "
-
-#: ../../printerdrake.pm_.c:2418
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2422
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"������� �������� �� ��������. ����������� �� ������� �� �� ��������� ������ "
-"��������; �� �� �� ��������� �� default �������; �� �� ������ ����������� � "
-"����; ��� �� �� ��������� ������� �� �������� CUPS ������� ��������� �� Star/"
-"Open Office."
-
-#: ../../printerdrake.pm_.c:2423
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"������� ���The following printers are configured. Double-click on a printer "
-"to change its settings; to make it the default printer; or to view "
-"information about it."
-
-#: ../../printerdrake.pm_.c:2449
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"������ ����� �������� (�� �� �������� ��� �������� ������� CUPS ��������)"
-
-#: ../../printerdrake.pm_.c:2467
-msgid "Change the printing system"
-msgstr "��������� ������ �� ��������"
-
-#: ../../printerdrake.pm_.c:2472 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "�������� ���"
-
-#: ../../printerdrake.pm_.c:2628 ../../printerdrake.pm_.c:2678
-#: ../../printerdrake.pm_.c:2887
-msgid "Do you want to configure another printer?"
-msgstr "�� �� ������ �� �������� ��� ����� �������?"
-
-#: ../../printerdrake.pm_.c:2714
-msgid "Modify printer configuration"
-msgstr "������ ������������� ��������"
-
-#: ../../printerdrake.pm_.c:2716
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"������� %s\n"
-"�� �� ������ �� �������� ������ �� ���� �������?"
-
-#: ../../printerdrake.pm_.c:2720
-msgid "Do it!"
-msgstr "����� ��!"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2780
-msgid "Printer connection type"
-msgstr "��� ��������� ��������"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2784
-msgid "Printer name, description, location"
-msgstr "���, ���� � �������� ��������"
-
-#: ../../printerdrake.pm_.c:2728 ../../printerdrake.pm_.c:2799
-msgid "Printer manufacturer, model, driver"
-msgstr "����������, ����� � ������� ��������"
-
-#: ../../printerdrake.pm_.c:2729 ../../printerdrake.pm_.c:2800
-msgid "Printer manufacturer, model"
-msgstr "��������� � ����� ��������"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2810
-msgid "Set this printer as the default"
-msgstr "������ ���� ������� ��� default"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2815
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "����� ���� ������� � Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2741 ../../printerdrake.pm_.c:2824
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "������ ���� ������� �� Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2833
-msgid "Print test pages"
-msgstr "�������� ���� ��������"
-
-#: ../../printerdrake.pm_.c:2743 ../../printerdrake.pm_.c:2835
-msgid "Know how to use this printer"
-msgstr "�� �� ����� ���� �� ��������� ���� �������"
-
-#: ../../printerdrake.pm_.c:2745 ../../printerdrake.pm_.c:2837
-msgid "Remove printer"
-msgstr "������ �����a�"
-
-#: ../../printerdrake.pm_.c:2789
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "������� ����� ������� \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2813
-msgid "Default printer"
-msgstr "Default �������"
-
-#: ../../printerdrake.pm_.c:2814
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "�������  \"%s\" �� ���� ��������� ��� default �������."
-
-#: ../../printerdrake.pm_.c:2818 ../../printerdrake.pm_.c:2821
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "������� ������� � Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "������� \"%s\" �� ������� ����� � Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2822
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "�������� �������� �������� \"%s\" � Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2827 ../../printerdrake.pm_.c:2830
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "�������� �������� �� Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "������� \"%s\" �� ������� ������� �� Star Office/OpenOffice.org-�"
-
-#: ../../printerdrake.pm_.c:2831
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-"������� ������� �������� �������� \"%s\" �� Star Office/OpenOffice.org-�"
-
-#: ../../printerdrake.pm_.c:2839
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "�� �� ������ �� �������� ������� \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2841
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "������� ������� \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "���e���a�� ������ja"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"���������� � ���� �� ������������� proxy-��.\n"
-"\n"
-"���� ������ �� �������� ���� http � ftp ��������\n"
-"�� ��� ��� ����������� ����� � �������\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"����� ��� �� ������� http proxy �����������\n"
-"�������� ���� �������� ������� �� ������ �� ����������� ������"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "����"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url ����� �� ������ �� http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "���j ����� �� ������ �� ���� ��������� ������ (����)"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"����� ��� �� ������� ����������� � ftp proxy-��\n"
-"���� �������� �������� ������� �� ������ �� ��������� ftp ������"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url ����� �� ������ �� 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"������� proxy ���������� ��� � �������, ������� �������.\n"
-"���� �������� ������� ������� �� ������ �� ��������� ���������� ���/�������"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "�����a�e"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "�������"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "������ ������� �������"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "������������� �������. �������� ������!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "���� ������ ������ ��������� �� _����������_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "���� ����� ���� � ���� %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ��������"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid �������� (����� �������j� raidtools ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "���� ������� ��������� �� RAID ���� %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "������� ALSA (Advanced Linux Sound Architecture) ������ �� ����"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron -  �������� ������.������e"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd �� ������� �� ��a�e�� ������� ������je � �����a�� ����� syslog.\n"
-"������� �� � �� �a�e�� �a���� (���� � �� ������� �a�����a) ���� je ������j� "
-"�����"
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"����e�� ������� �������� at ��������,��� �  batch  ������� ��� j� "
-"�����e������\n"
-"������� ���a."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron j� ���������� UNIX ������� ��j� ����e�� ���������� ��������\n"
-"����������� � �������� �����. vixie cron  ����j� ����j� ������� UNIX cron,"
-"������j��� ����  ��������� � ���� ����������."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ��j� ������� �� ���� �� ���������-�������� ��������j� ��� ��� j�\n"
-"Midnight Commander.���� ���� ��j� ������� ��  pop-up ����je ��  �������."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ������ ���������� ���������, � �� ������� �� �������� \n"
-"����/�������� �������."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:414
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache j�  WWW ������. �� �� ������� �� �������j�  HTML ��j����\n"
-"� CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"�������� ����� ������ ����� (���� ��� netd) ������ \n"
-"����� �������� �������.�� j� ��������� �� ������a�� �����x ������� ��� ���. "
-"elnet, ftp, rsh, �  rlogin.�������j��� ����, �������j��� � ������� \n"
-"�� ��j� j� �� ���������."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"��������� ���������� ������ �� Linux ������ ������ 2.2, �� �� ��������\n"
-"firewall ���� ������� ���� ������ �� ������� ������."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"���j ����� �������� �������� ���� ��������� ���� j� ���e���� \n"
-"�  /etc/sysconfig/keyboard.��� �� ���e���� ������e�� kbdconfig ������.\n"
-"����� �� ���� ������� �� �e���� �a���a."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"���������� ������������ ���������� �������� � /boot ��r\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "���������� ��������� � ������������� �������� ��� �������� �������."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf �� ������� �������� ����� ������� �����\n"
-"�������� ������� ���� ��������� � ���������� �������."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd j� print ����� ��������  �� �� lpr ����� �����.�� j� \n"
-"� ������ ������ ��j� ���������  print ������� ��������(���)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux-�� ��������� ������, ������� �� �� �������� ����� � ���������\n"
-"�������."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:415
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"������ ��� (BIND) j� Domain Name Server (DNS) ��j� �� ������� �� ��je host "
-"��� IP ������."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"������a�� � ��������a�� ���� ��e���� ��j� ������a(NFS), SMB (Lan\n"
-"Manager/Windows), �  NCP (NetWare) �a���� ������a�a. "
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"�������a�� � ���������a�� ���� ��e���� �������j�� �������������� �� ����� \n"
-"��� �����a�� �������."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS j� ��������� �������� �� �������  ��j���a ����� TCP/IP ��e��.\n"
-"���j ������ ��������� �������������� NFS �������,��j� �� ����������� ����� \n"
-"/etc/exports �������e."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS j� ��������� �������� �� �������  ��j���a ����� TCP/IP ��e��.\n"
-"���j ������ ��������� �������������� NFS  file locking ������j�"
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"���������� �������� numlock ������ ��� ��������\n"
-"� � XFree ��� ��������."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "������� �� OKI 4w � ������������ ��  win ��������."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA �������  �� ������ ������� ��  ������� � ������ � �����������.\n"
-"���� �� ��������� ������� ��j� ������������ ���� ��j� �������� ���������� \n"
-"�� ������� ��� ��j� ��������."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"��������� ������  RPC �������j��a,��j� �������\n"
-"��������� ��� NFS �  NIS.������� ������ ���� ���� �������� �� �a�����a\n"
-"��j� ���� ��� ������� �� ��������� ��j� ������� RPC ���������."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:417
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix j�  Mail Transport Agent,��j� � ����������e��� ����� �� j���� �a���� "
-"�� �����."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"���� � ������� ���������  entropy pool �� ���� �������� �������a�e\n"
-"�����j��� ���j��a."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"�������� raw ������� �� ���� ������� (��� ��� �� ���� ����\n"
-"���������), ��� ���� ���� ������� �� ���������� ��� ��� �� Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed ����� ��������� ���������� IP ���e� update-��a�� �����\n"
-"RIP ���������.��� �e RIP ����� �������� �� ����� ��e����,����������j� \n"
-" routing ��������� �� �������� �� ���������� ��e��."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat �������� ��������� ����������� �� ��e�� �� ������e\n"
-"�e�e�� ����������� �� ���� ��j� �a���� �� ��j  ��e��."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers �������� ��������� ����������� �� ��e�� �� �����j� �� je\n"
-"�������� �� ������ �a������."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho �������� ��������� ��a����� ����������� �� ����j� ����� ����\n"
-"��������� ���������� �� ������ �� ���������� rwho ������� (������ finger-�)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "������� ������ �� ���� �� ����� ������"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog j� ��j���� ������ ��� ����� ������ ������� �� �����a�� �����a\n"
-"� ������ ���������� ��� ��j�����a. ����� je ����� ��a�� ���� �������� syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "������ �������� �� ���� usb �������."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "����e�� X ���� ������ (�������� �� ��������� XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "��������� ���� ������� ����� ���������� �� �� ������� ��� ��������"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "��������"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "��������"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "���������� ������ �������"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:923
-msgid "System"
-msgstr "������"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "������� ��������������"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "������ ���� �������a"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "�������: %d ����������� �� %d �������������"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "�������"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "���������"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "�����������"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "������� � ������"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"����� ��� ���a �������� ���������ja\n"
-"� ���� �������."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "��� �����a��"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "�����"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "����"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "�������� �� ������ ����a"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "�������� �������"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "���������ja - ������a"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "��������"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "��������� ������"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "��e��� ������ej�"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB ������  host:"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "���e"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "�������"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-#, fuzzy
-msgid "MandrakeConsulting"
-msgstr "Mandrake ����� �� ���������"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "���������� ������..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"�� ���� ��������� ������ ���������, ����� �� ��������� �� ���� :(\n"
-"�������� ���� ����������� ���� ���������"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "������!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "�� ���� �� �������� �������� image ���� `%s'."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "���������������� ������������"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"���� ����� �� �������� ���������������� �������. ��� ������ �� ������� "
-"������� � ���� �� ������� ���������.\n"
-"\n"
-"�� ���� �������, ���� ���� �� �������� ����������� ���� ��������� �� ���� "
-"��������, �� ���������� ������� � ���� ������ ��������� ��������� "
-"���������.\n"
-"\n"
-"���� ���������� ����������, �������������� � ����������� ������ ���� ���� "
-"�������� ����������y, ��� ������ ��� �������� ����� ����������� �� ���� "
-"��������.\n"
-"\n"
-"�� �� ������ �� ���������?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "���������� ��������������� ������"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"��������� �� ����� ����� �� �� �� ���� ��������� � ������������� ����� ���� "
-"����� ���������"
-
-#: ../../standalone/drakautoinst_.c:83
-#, fuzzy
-msgid "Creating auto install floppy"
-msgstr "������� ���� ������������ �����"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"�����������.\n"
-"\n"
-"��������� �� ��������������� �� �������� � ���� ���� �� ������ ����"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:548
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "��������� !"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"������� �� ������� ��������.\n"
-"���� ������ �������� ���� �����������."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "���������������"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "����� ��������"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "������ ����� ��������"
-
-#: ../../standalone/drakbackup_.c:438
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup �������� \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:439
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Daemon ��������\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:443
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup ������ ���������\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:465
-msgid "total progess"
-msgstr "������ ��������"
-
-#: ../../standalone/drakbackup_.c:544 ../../standalone/drakbackup_.c:591
-msgid "Backup system files..."
-msgstr "Backup ���������� �������..."
-
-#: ../../standalone/drakbackup_.c:592 ../../standalone/drakbackup_.c:656
-msgid "Hard Disk Backup files..."
-msgstr "backup-����� ������� �� ���� �����..."
-
-#: ../../standalone/drakbackup_.c:604
-msgid "Backup User files..."
-msgstr "backup-����� ������������ �������"
-
-#: ../../standalone/drakbackup_.c:605
-msgid "Hard Disk Backup Progress..."
-msgstr "�������� Backup-����� ���� �����..."
-
-#: ../../standalone/drakbackup_.c:655
-msgid "Backup Other files..."
-msgstr "backup-����� ������� �������..."
-
-#: ../../standalone/drakbackup_.c:663
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"����� ������� ������� ����� FTP-� : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid ""
-"\n"
-" FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) �������� �� FTP ����������: ���� ������ ������� ���� backup ������� "
-"����� FTP.\n"
-
-#: ../../standalone/drakbackup_.c:676
-#, fuzzy
-msgid " Error during mail sending. \n"
-msgstr "(!) ������ ����� ����� mail-�. \n"
-
-#: ../../standalone/drakbackup_.c:717 ../../standalone/drakbackup_.c:728
-#: ../../standalone/drakbackup_.c:739 ../../standalone/drakfont_.c:788
-msgid "File Selection"
-msgstr "������ �������"
-
-#: ../../standalone/drakbackup_.c:744
-msgid "Select the files or directories and click on 'Add'"
-msgstr "��������� ������� ��� ������������� � ������� �� '�����'"
-
-#: ../../standalone/drakbackup_.c:779
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"��������� ��� ������ ���� ��� �������.\n"
-
-#: ../../standalone/drakbackup_.c:780
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"��� ������ ���� �������� � ������� �������� ��� ������� � ����� /etc "
-"�������������.\n"
-
-#: ../../standalone/drakbackup_.c:781
-msgid "Backup your System files. ( /etc directory )"
-msgstr "��������� ����� ��������� ������� ( /etc ������������ )"
-
-#: ../../standalone/drakbackup_.c:782
-#, fuzzy
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-"������� ������������� Backup-���  (�� ������� �� �� ������ backup-�����)"
-
-#: ../../standalone/drakbackup_.c:783
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "�� ������� �������� ������� (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:784
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"�� ���� ������� ���� ���� �� �������� ���� ���� �������\n"
-" ����� /etc �������������."
-
-#: ../../standalone/drakbackup_.c:801
-msgid "Please check all users that you want to include in your backup."
-msgstr "���������� ��� ��������� ���� ������ �� �������� � backup."
-
-#: ../../standalone/drakbackup_.c:828
-msgid "Do not include the browser cache"
-msgstr "�� ������� ��� ������������"
-
-#: ../../standalone/drakbackup_.c:829 ../../standalone/drakbackup_.c:853
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-"������� ������������� Backup-���  (�� ������� �� �� ������ backup-�����)"
-
-#: ../../standalone/drakbackup_.c:851 ../../standalone/drakfont_.c:828
-msgid "Remove Selected"
-msgstr "������ �����������"
-
-#: ../../standalone/drakbackup_.c:889
-msgid "Windows (FAT32)"
-msgstr "Windows(FAT32)"
-
-#: ../../standalone/drakbackup_.c:928
-msgid "Users"
-msgstr "���������"
-
-#: ../../standalone/drakbackup_.c:954
-msgid "Use FTP connection to backup"
-msgstr "�������� Use FTP connection to backup"
-
-#: ../../standalone/drakbackup_.c:957
-msgid "Please enter the host name or IP."
-msgstr "����� ��� ������� ��� ����� ��� IP."
-
-#: ../../standalone/drakbackup_.c:962
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"������� ������������ �� ��\n"
-" ������� backup �� ���� ����."
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter your login"
-msgstr "������� ���� ���������� ���"
-
-#: ../../standalone/drakbackup_.c:972
-msgid "Please enter your password"
-msgstr "������� ���� �������"
-
-#: ../../standalone/drakbackup_.c:978
-msgid "Remember this password"
-msgstr "������� ��� �������"
-
-#: ../../standalone/drakbackup_.c:1042 ../../standalone/drakbackup_.c:2038
-msgid "FTP Connection"
-msgstr "FTP �������ja"
-
-#: ../../standalone/drakbackup_.c:1049 ../../standalone/drakbackup_.c:2046
-msgid "Secure Connection"
-msgstr "���������� ���������"
-
-#: ../../standalone/drakbackup_.c:1075 ../../standalone/drakbackup_.c:2879
-msgid "Use CD/DVDROM to backup"
-msgstr "������� CD/DVDROM �� backup"
-
-#: ../../standalone/drakbackup_.c:1078 ../../standalone/drakbackup_.c:2883
-msgid "Please choose your CD space"
-msgstr "��������� ��� CD �������"
-
-#: ../../standalone/drakbackup_.c:1084 ../../standalone/drakbackup_.c:2895
-msgid "Please check if you are using CDRW media"
-msgstr "��������� �� �� ��������� CDRW �����"
-
-#: ../../standalone/drakbackup_.c:1090 ../../standalone/drakbackup_.c:2901
-msgid "Please check if you want to erase your CDRW before"
-msgstr "��������� �� �� ������ ��������� ��� CDRW ���"
-
-#: ../../standalone/drakbackup_.c:1096
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"��������� �� �� ������ �� ��������\n"
-" install boot �� ��� CD."
-
-#: ../../standalone/drakbackup_.c:1102
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"������� ��� ����� CD Writer �������\n"
-" ex: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1143
-msgid "Use tape to backup"
-msgstr "������� ����� �� backup"
-
-#: ../../standalone/drakbackup_.c:1146
-msgid "Please enter the device name to use for backup"
-msgstr "������� ��� ������� ���� ��������� �� backup"
-
-#: ../../standalone/drakbackup_.c:1152 ../../standalone/drakbackup_.c:1193
-#: ../../standalone/drakbackup_.c:2003
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"������� ���������� ��������\n"
-" ��������� �� Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1185 ../../standalone/drakbackup_.c:1995
-msgid "Please enter the directory to save:"
-msgstr "������� ������������ �� �� ��������:"
-
-#: ../../standalone/drakbackup_.c:1199 ../../standalone/drakbackup_.c:2009
-msgid "Use quota for backup files."
-msgstr "������� quota ��r backup �������"
-
-#: ../../standalone/drakbackup_.c:1257
-msgid "Network"
-msgstr "�����"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: ../../standalone/drakbackup_.c:1287 ../../standalone/drakbackup_.c:1291
-#: ../../standalone/drakbackup_.c:1295
-msgid "hourly"
-msgstr "�� ���"
-
-#: ../../standalone/drakbackup_.c:1288 ../../standalone/drakbackup_.c:1292
-#: ../../standalone/drakbackup_.c:1295
-msgid "daily"
-msgstr "������"
-
-#: ../../standalone/drakbackup_.c:1289 ../../standalone/drakbackup_.c:1293
-#: ../../standalone/drakbackup_.c:1295
-msgid "weekly"
-msgstr "�������"
-
-#: ../../standalone/drakbackup_.c:1290 ../../standalone/drakbackup_.c:1294
-#: ../../standalone/drakbackup_.c:1295
-msgid "monthly"
-msgstr "�������"
-
-#: ../../standalone/drakbackup_.c:1302
-msgid "Use daemon"
-msgstr "������� �����"
-
-#: ../../standalone/drakbackup_.c:1307
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"��������� ��������� �������� \n"
-"������ ������ backup-�"
-
-#: ../../standalone/drakbackup_.c:1313
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"���������\n"
-"����� �� backup."
-
-#: ../../standalone/drakbackup_.c:1317
-msgid "Use Hard Drive with daemon"
-msgstr "������� ���� ���� �� �������"
-
-#: ../../standalone/drakbackup_.c:1319
-msgid "Use FTP with daemon"
-msgstr "������� FTP �� �������"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "��������� �� �� �� cron ����� ������� � ���� �������."
-
-#: ../../standalone/drakbackup_.c:1359
-msgid "Send mail report after each backup to :"
-msgstr "������ mail �������� ����� ������ backup/� �� :"
-
-#: ../../standalone/drakbackup_.c:1401
-msgid "What"
-msgstr "���"
-
-#: ../../standalone/drakbackup_.c:1406
-msgid "Where"
-msgstr "���"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "When"
-msgstr "����"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "More Options"
-msgstr "���� ������"
-
-#: ../../standalone/drakbackup_.c:1435 ../../standalone/drakbackup_.c:2791
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup �������������"
-
-#: ../../standalone/drakbackup_.c:1453
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "��������� ��� ������ �� backup-�����"
-
-#: ../../standalone/drakbackup_.c:1455
-msgid "on Hard Drive"
-msgstr "�� ���� ����"
-
-#: ../../standalone/drakbackup_.c:1466
-msgid "across Network"
-msgstr "����� �����"
-
-#: ../../standalone/drakbackup_.c:1530
-msgid "Please choose what you want to backup"
-msgstr "��������� ��� ������ �� backup-�����"
-
-#: ../../standalone/drakbackup_.c:1531
-msgid "Backup system"
-msgstr "Backup-�� ������"
-
-#: ../../standalone/drakbackup_.c:1532
-msgid "Backup Users"
-msgstr "Backup-�� ���������"
-
-#: ../../standalone/drakbackup_.c:1535
-msgid "Select user manually"
-msgstr "��������� ��������� �����"
-
-#: ../../standalone/drakbackup_.c:1617
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Backup ������: \n"
-
-#: ../../standalone/drakbackup_.c:1618
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- ��������� �������:\n"
-
-#: ../../standalone/drakbackup_.c:1620
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- ���������� �������:\n"
-
-#: ../../standalone/drakbackup_.c:1622
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- ������ �������:\n"
-
-#: ../../standalone/drakbackup_.c:1624
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- ����� �� ���� ���� �� ������ : %s\n"
-
-#: ../../standalone/drakbackup_.c:1625
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- ����� �� FTP ��� ���� : %s\n"
-
-#: ../../standalone/drakbackup_.c:1626
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t ���������� ���: %s\n"
-"\t\t �� ������: %s \n"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- O�����:\n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid "\tDo not include System Files\n"
-msgstr "\t�� ������� ��������� �������\n"
-
-#: ../../standalone/drakbackup_.c:1629
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackup ������� tar � bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackus ������� tar � gzip\n"
-
-#: ../../standalone/drakbackup_.c:1631
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- �����n (%s) �������� :\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid "\t-Hard drive.\n"
-msgstr "\t-���� ����.\n"
-
-#: ../../standalone/drakbackup_.c:1633
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1634
-msgid "\t-Network by FTP.\n"
-msgstr "\t-����� ����� FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1635
-msgid "\t-Network by SSH.\n"
-msgstr "\t-����� ����� SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "��� �������������, �������� �� �������� ��� ��������\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"����� �������� �� ���������:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1743
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"����� ������������ ��������:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1745
-msgid "Please uncheck or remove it on next time."
-msgstr "������������ ��� �������� �� ������� ���."
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Backup files are corrupted"
-msgstr "Backup ������� �� �����������"
-
-#: ../../standalone/drakbackup_.c:1776
-msgid "          All your selectionned data have been          "
-msgstr "          ��� ���� ����������� ������ ��          "
-
-#: ../../standalone/drakbackup_.c:1777
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          ������� ��������� �� %s       "
-
-#: ../../standalone/drakbackup_.c:1876
-msgid "         Restore Configuration       "
-msgstr "        ��������� �������������         "
-
-#: ../../standalone/drakbackup_.c:1894
-msgid "OK to restore the other files."
-msgstr "� ���� �� �������� ������ �������."
-
-#: ../../standalone/drakbackup_.c:1912
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"��������� ����� ��������� (���� ��������� ������ �� ��������� �� �����)"
-
-#: ../../standalone/drakbackup_.c:1962
-msgid "Backup the system files before:"
-msgstr "Backup ���������� ������� ���:"
-
-#: ../../standalone/drakbackup_.c:1964
-msgid "please choose the date to restore"
-msgstr "��������� ����� �� ���������"
-
-#: ../../standalone/drakbackup_.c:1992
-msgid "Use Hard Disk to backup"
-msgstr "������� ���� ���� �� backup"
-
-#: ../../standalone/drakbackup_.c:2073
-msgid "Restore from Hard Disk."
-msgstr "������� (restore) �� ���� �����"
-
-#: ../../standalone/drakbackup_.c:2075
-msgid "Please enter the directory where backups are stored"
-msgstr "������� ������������ ��� �� ������� backup"
-
-#: ../../standalone/drakbackup_.c:2133
-msgid "Select another media to restore from"
-msgstr "��������e����� ����� �� ��������� ��"
-
-#: ../../standalone/drakbackup_.c:2135
-msgid "Other Media"
-msgstr "����� �����"
-
-#: ../../standalone/drakbackup_.c:2141
-msgid "Restore system"
-msgstr "������ ������"
-
-#: ../../standalone/drakbackup_.c:2142
-msgid "Restore Users"
-msgstr "������ ���������"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Restore Other"
-msgstr "������ ������"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "select path to restore (instead of / )"
-msgstr "��������� ������ �� ��������� (������ /)"
-
-#: ../../standalone/drakbackup_.c:2149
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "����� ���� backup ��� ��������� (���� �� ������������� backup-�.)"
-
-#: ../../standalone/drakbackup_.c:2150
-msgid "Remove user directories before restore."
-msgstr "������ ���������� ������������� ��� ���������"
-
-#: ../../standalone/drakbackup_.c:2207
-msgid "Restore all backups"
-msgstr "������ ��� backup-���"
-
-#: ../../standalone/drakbackup_.c:2215
-msgid "Custom Restore"
-msgstr "��������� �� �e��"
-
-#: ../../standalone/drakbackup_.c:2256 ../../standalone/drakbackup_.c:2281
-#: ../../standalone/drakbackup_.c:2302 ../../standalone/drakbackup_.c:2323
-#: ../../standalone/drakbackup_.c:2341 ../../standalone/drakbackup_.c:2373
-#: ../../standalone/drakbackup_.c:2389 ../../standalone/drakbackup_.c:2409
-#: ../../standalone/drakbackup_.c:2428 ../../standalone/drakbackup_.c:2450
-#: ../../standalone/drakfont_.c:578
-msgid "Help"
-msgstr "�����"
-
-#: ../../standalone/drakbackup_.c:2259 ../../standalone/drakbackup_.c:2286
-#: ../../standalone/drakbackup_.c:2305 ../../standalone/drakbackup_.c:2326
-#: ../../standalone/drakbackup_.c:2344 ../../standalone/drakbackup_.c:2392
-#: ../../standalone/drakbackup_.c:2412 ../../standalone/drakbackup_.c:2431
-msgid "Previous"
-msgstr "���������"
-
-#: ../../standalone/drakbackup_.c:2261 ../../standalone/drakbackup_.c:2328
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "�������"
-
-#: ../../standalone/drakbackup_.c:2307
-msgid "Build Backup"
-msgstr "������� backup"
-
-#: ../../standalone/drakbackup_.c:2346 ../../standalone/drakbackup_.c:3023
-msgid "Restore"
-msgstr "������"
-
-#: ../../standalone/drakbackup_.c:2394 ../../standalone/drakbackup_.c:2414
-#: ../../standalone/drakbackup_.c:2435
-msgid "Next"
-msgstr "�������"
-
-#: ../../standalone/drakbackup_.c:2468
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"��������� backup ��� ���������...\n"
-" ��� ��������� �� �� ���� ������ ��������."
-
-#: ../../standalone/drakbackup_.c:2489
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"������ ��� ����� mail-�\n"
-"  ��� �������� ���� ������\n"
-"  �������� sendmail"
-
-#: ../../standalone/drakbackup_.c:2512
-msgid "Package List to Install"
-msgstr "����� ������ �� �����������"
-
-#: ../../standalone/drakbackup_.c:2540
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"������ ����� ����� ����� ����� FTP-�.\n"
-" ��������� ���� FTP �������������."
-
-#: ../../standalone/drakbackup_.c:2563
-msgid "Please select data to restore..."
-msgstr "��������� ������� �� ���������..."
-
-#: ../../standalone/drakbackup_.c:2584
-msgid "Please select media for backup..."
-msgstr "��������� ����� ��j� ������ �� ���������� �� backup..."
-
-#: ../../standalone/drakbackup_.c:2606
-msgid "Please select data to backup..."
-msgstr "��������� ������� ��j� ������ �� backup-�����..."
-
-#: ../../standalone/drakbackup_.c:2628
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"���� �������� ������������� ���� \n"
-"�������� �� �������� ��� ��������."
-
-#: ../../standalone/drakbackup_.c:2649
-msgid "Under Devel ... please wait."
-msgstr "� ������� ... ����� ��� ���������"
-
-#: ../../standalone/drakbackup_.c:2729
-msgid "Backup system files"
-msgstr "Backup-�� ��������� �������"
-
-#: ../../standalone/drakbackup_.c:2731
-msgid "Backup user files"
-msgstr "Backup-�� ���������� �������"
-
-#: ../../standalone/drakbackup_.c:2733
-msgid "Backup other files"
-msgstr "Backup-�� ������ �������"
-
-#: ../../standalone/drakbackup_.c:2735 ../../standalone/drakbackup_.c:2766
-msgid "Total Progress"
-msgstr "������ ��������"
-
-#: ../../standalone/drakbackup_.c:2757
-msgid "files sending by FTP"
-msgstr "������� ������� ����� FTP-�"
-
-#: ../../standalone/drakbackup_.c:2761
-msgid "Sending files..."
-msgstr "����� �������..."
-
-#: ../../standalone/drakbackup_.c:2831
-msgid "Data list to include on CDROM."
-msgstr "����� �������� ���� ��������� �� CDROM."
-
-#: ../../standalone/drakbackup_.c:2889
-msgid "Please enter the cd writer speed"
-msgstr "������� ������ cd ������"
-
-#: ../../standalone/drakbackup_.c:2907
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "������� ��� ����� CD ������ (ex: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2913
-msgid "Please check if you want to include install boot on your CD."
-msgstr "��������� �� �� ������ �� �������� install boot �� ��� CD."
-
-#: ../../standalone/drakbackup_.c:2979
-msgid "Backup Now from configuration file"
-msgstr "Backup-�� ���� �� ��������������� �����"
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "View Backup Configuration."
-msgstr "�������� Backup �������������."
-
-#: ../../standalone/drakbackup_.c:3010
-msgid "Wizard Configuration"
-msgstr "�������� ������������a"
-
-#: ../../standalone/drakbackup_.c:3014
-msgid "Advanced Configuration"
-msgstr "�������� K�����������a"
-
-#: ../../standalone/drakbackup_.c:3018
-msgid "Backup Now"
-msgstr "Backup ���"
-
-#: ../../standalone/drakbackup_.c:3043
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3094
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"���� ������:\n"
-"\n"
-" � ���� ������ Drakbackup ��� ��������� �� ���������:\n"
-"\n"
-" - ��� ����������:\n"
-"    \n"
-"      ������� ��������� bzip2 ����������, ���� ����\n"
-"      ������������ ������� �� gzip-� (��� 2-10 %).\n"
-"      ��� ������ ���� ����������� �� default-� ����\n"
-"      ���� ��� ��� ���������� ������� ���� ������� ( ��� 1000% ����).\n"
-" \n"
-" - ��� ���������:\n"
-"\n"
-"      ��� ������ �� ��������� ��� backup, ��� ���\n"
-"      ������ ���� �������� ��������� ���� ��� ������ ��\n"
-"      ����������� ��� backup ��� ���� �� ������ ���������.\n"
-"      \n"
-" - the .backupignore ���:\n"
-"\n"
-"      ��� �� cvs-��, Drakbackup �� ���������� ��� ��������\n"
-"      ��������� .backupignore ������� � ������ �������������.\n"
-"      ������: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3124
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" ���� ������ ����� sendmail-� �� ���������� \n"
-" ����� �������������� postfix-�. �� �� �� ������ ������ ��\n"
-" �������� myhostname ��� mydomain � /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3132
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"���� ������:\n"
-"\n"
-" - Backup ���������� �������:\n"
-"       \n"
-"\t��� ������ ��������� �� backup-����� ��� /etc ������������,\n"
-"\t���� ������ ��� �������������� �������. ����� ��� �� ������\n"
-"\t������� ����� ��������� �� �� �� ��������� ������� �������:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup ����������� �������: \n"
-"\n"
-"\t��� ������ ��� ��������� �� ����������� ��� ��������� ���� ������ \n"
-"\t�� backup-�����.\n"
-"\t�� �� �������� ������� �� �����, ������������� �� \n"
-"\t���������� ������� �� ���� �������� ������������.\n"
-"\n"
-" - Backup ������� �������: \n"
-"\n"
-"\t��� ������ ��� ��������� �� ������ ��� �������� �� Backup.\n"
-"\t�� ���� ������� �������� ���� ������ \n"
-"\t�������� ������������� backup.\t\t\n"
-" \n"
-" - ������������� Backup-���:\n"
-"\n"
-"\t������������� backup �� ���������� \n"
-"\t������ �� backup. ��� ������ ��� ��������� \n"
-"\t�� ���� ���� ������� ���� ���, � \n"
-"\t������� ���� ��� ��������.\n"
-"\t���� ���� ����, ����� ���������\n"
-"\t�� �������� ���� ������� �� ���������\n"
-"\t������.\n"
-"\t������� ����� �������� ��� ������ ���\n"
-"\t����� backup-��� �� ��������� ��� ������ backup-�.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3171
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"���� ���������:\n"
-" \n"
-"���� ��������� ������ �� ���� ���������, ���� ��� ������������� \n"
-"backup-� ��������� �� ������� ����� backup-��� ����� �� �����.\n"
-"\n"
-"������� �� ������ �� ��������� ��������� ��������� ������������ ���\n"
-"������ ���������.\n"
-"\n"
-"� ������ �������, ���� ���� �� ��������� ���� ����� �� ����\n"
-"\n"
-" - ������������� Backup-���:\n"
-"\n"
-"\t������������� backup �� ���������� ������ \n"
-"\t� backup-�, ��� ��� ��������� �� \n"
-"\tto backup-����� ��� ������� ���� ���, � \n"
-"\t������� ���� ��� ���� �� ��������.\n"
-"\t���� ����  ���� ����� ���������\n"
-"\t�� �������� ���� ������� �� ���������\n"
-"\t�������.\n"
-"\t������� ����� �������� ��� ������ ���\n"
-"\t����� backup-��� �� ���� ��������� ��� ������ backup-�.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3197 ../../standalone/drakbackup_.c:3272
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3199 ../../standalone/drakbackup_.c:3274
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" ���� ������� �� ���������; ������ �� ��������������� �/��� ������\n"
-" ��� �������� GNU General Public License ���� �� ���������\n"
-" � Free Software ���������; ��� ������� 2, ��� (� ����� �������)\n"
-" ���� ����� ������� �������.\n"
-"\n"
-" ���� ������� �� ������������ � ���� �� �� ���� �� �������,\n"
-" ��� ��� ������� �����Ƹ��; ��� � ��� ��������� ��\n"
-" ��������� � ����¸ǽ� ÿ������.  ����������\n"
-" GNU General Public ������� �� ���� ������.\n"
-"\n"
-" ������� �� �� ���� ������ GNU General Public �������\n"
-" ������� �� ���� ���������; ������� �� ������, ������ ��� �� ������ Free "
-"Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3213
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"����:\n"
-"\n"
-"  Drakbackup �� ������� �� backup ����� �������.\n"
-"  ����� ������������� ������ ��������: \n"
-"\t- ��������� �������, \n"
-"\t- ���������� �������, \n"
-"\t- ������ �������.\n"
-"\t���  ��� ��� ������ ...  � ����� (��� ��� �� Windows ���������)\n"
-"\n"
-"  Drakbackup ��� ���������� backup y����� ������� ��:\n"
-"\t- ���� ����.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (��� ����������, rescue � autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup ��������� �� �������� ���� ������ �\n"
-"  �������� ���������� ������������.\n"
-"\n"
-"  �� default-� ��� backup-��� �� ���� �������� � ���\n"
-"  /var/lib/drakbackup ������������\n"
-"\n"
-"  �������������� ����:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"����� �� ���������:\n"
-"  \n"
-"  ����� ������� ���������, DrakBackup �� �������� \n"
-"  ��� ��������� ������������ � ��������� �� �� �� ��� \n"
-"  backup ������� ��������. ����������� �� \n"
-"  �� ������� �������� backup ��� ���������.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3251
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"���� �����:\n"
-"\n"
-"������ ������� ���� ��������� ftp backup, ���� ��� ���� \n"
-"backup-��� ���� �� ��� �������� �� ������� �� ������.\n"
-"���� �� � ���� ��������, ������ �� �������� backup �� ���� ����� \n"
-"��� ���� �� �������� �� ������.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3260
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"�������� ��� ���������:\n"
-"\n"
-"����� ������� ���������, Drakbackup �� ��������� ��� ���� \n"
-"backup ������� ��� ���� �� ������.\n"
-"��� ���������, Drakbackup �� �������� \n"
-"��� ��������� ������������, � ���������� ��� \n"
-"�������. ����� �� �� ������ ������� � �� �������� \n"
-"backup ������� �����.\n"
-
-#: ../../standalone/drakbackup_.c:3288
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"����:\n"
-"\n"
-"  Drakbackup �� ������� �� backup ����� �������.\n"
-"  ����� ������������� ������ �������� \n"
-"\t- ��������� �������, \n"
-"\t- ���������� �������, \n"
-"\t- ������ �������.\n"
-"\tor ��� ��� ������ ...  � ����� (���. Windows ���������)\n"
-"\n"
-"  Drakbackup ��� ��������� �� backup-����� ��� ������ ��:\n"
-"\t- ���� ����.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (�� autoboot, rescue � autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup ��� ��������� �� �������� ��� ������ � \n"
-"  ��������� ����������� �������������.\n"
-"\n"
-"  �� default-� ��� backup-��� �� ���� �������� � ���\n"
-"  /var/lib/drakbackup ������������\n"
-"\n"
-"  �������������� ����:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"�������� ���������:\n"
-"  \n"
-"  ����� ������� ���������, Drakbackup �� ��������\n"
-"  ��� ��������� ������������ � ��������� �� �� �� ���\n"
-"  backup ������� ��������. ����������� ��\n"
-"  �� ������� �������� backup ��� ���������.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "����������� %s-� ��������. ������ ��:"
-
-#: ../../standalone/drakfloppy_.c:64
-msgid "usage: drakfloppy\n"
-msgstr "��������: drakfloppy\n"
-
-#: ../../standalone/drakfloppy_.c:68
-msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-
-#: ../../standalone/drakfloppy_.c:69
-msgid "Module name"
-msgstr "��� �����a"
-
-#: ../../standalone/drakfloppy_.c:69
-msgid "Size"
-msgstr "�������a"
-
-#: ../../standalone/drakfloppy_.c:74 ../../standalone/drakfloppy_.c:373
-msgid "drakfloppy"
-msgstr "drakfloppy"
-
-#: ../../standalone/drakfloppy_.c:91
-msgid "boot disk creation"
-msgstr "�����a�� boot ����a"
-
-#: ../../standalone/drakfloppy_.c:99 ../../standalone/drakfloppy_.c:112
-msgid "default"
-msgstr "default"
-
-#: ../../standalone/drakfloppy_.c:115
-#, c-format
-msgid "DrakFloppy Error: %s"
-msgstr "DrakFloppy ��e���: %s"
-
-#: ../../standalone/drakfloppy_.c:126
-msgid "kernel version"
-msgstr "�����j� ������a"
-
-#: ../../standalone/drakfloppy_.c:132
-msgid "General"
-msgstr "����e"
-
-#: ../../standalone/drakfloppy_.c:137
-msgid "Expert Area"
-msgstr "��� �� �������e"
-
-#: ../../standalone/drakfloppy_.c:140
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd ������� ���������"
-
-#: ../../standalone/drakfloppy_.c:141
-msgid "Add a module"
-msgstr "����j �����"
-
-#: ../../standalone/drakfloppy_.c:161
-msgid "force"
-msgstr "�����"
-
-#: ../../standalone/drakfloppy_.c:162
-msgid "if needed"
-msgstr "������� j� ��������"
-
-#: ../../standalone/drakfloppy_.c:163
-msgid "omit scsi modules"
-msgstr "omit scsi ������"
-
-#: ../../standalone/drakfloppy_.c:164
-msgid "omit raid modules"
-msgstr "omit raid ������"
-
-#: ../../standalone/drakfloppy_.c:200
-msgid "Remove a module"
-msgstr "������ �����"
-
-#: ../../standalone/drakfloppy_.c:222
-msgid "Output"
-msgstr "Output"
-
-#: ../../standalone/drakfloppy_.c:234
-msgid "Build the disk"
-msgstr "������j ����"
-
-#: ../../standalone/drakfloppy_.c:422
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "��������� �� �� �� ����� �������� � ������� %s"
-
-#: ../../standalone/drakfloppy_.c:427
-#, fuzzy, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"����� ���� �������� � ������� %s.\n"
-"����� ��� �� �� �������."
-
-#: ../../standalone/drakfloppy_.c:429
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "�� ���� �� ��������: %s"
-
-#: ../../standalone/drakfloppy_.c:433
-#, c-format
-msgid ""
-"Unable to close properly mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-"�� ���� �������� �� �������� mkbootdisk: \n"
-" %s \n"
-" %s"
-
-#: ../../standalone/drakfont_.c:230
-msgid "Search installed fonts"
-msgstr "����� ����������� �������"
-
-#: ../../standalone/drakfont_.c:232
-msgid "Unselect fonts installed"
-msgstr "������������� ������� �����������"
-
-#: ../../standalone/drakfont_.c:253
-msgid "parse all fonts"
-msgstr "�������� ��� �������"
-
-#: ../../standalone/drakfont_.c:254
-msgid "no fonts found"
-msgstr "������� ���� ���������"
-
-#: ../../standalone/drakfont_.c:262 ../../standalone/drakfont_.c:304
-#: ../../standalone/drakfont_.c:353 ../../standalone/drakfont_.c:413
-#: ../../standalone/drakfont_.c:422 ../../standalone/drakfont_.c:448
-#: ../../standalone/drakfont_.c:460 ../../standalone/drakfont_.c:473
-msgid "done"
-msgstr "�������"
-
-#: ../../standalone/drakfont_.c:266
-msgid "could not find any font in your mounted partitions"
-msgstr "�� ���� �� �������� ������� ���� �� ���������� ���������"
-
-#: ../../standalone/drakfont_.c:302
-msgid "Reselect correct fonts"
-msgstr "������ �������� �������� �������"
-
-#: ../../standalone/drakfont_.c:305
-msgid "could not find any font.\n"
-msgstr "�� ���� �� �������� ������� ����.\n"
-
-#: ../../standalone/drakfont_.c:328
-msgid "Search fonts in installed list"
-msgstr "����� ������� � ���� ������������"
-
-#: ../../standalone/drakfont_.c:351
-msgid "Fonts copy"
-msgstr "������ �����"
-
-#: ../../standalone/drakfont_.c:354
-msgid "True Type fonts installation"
-msgstr "����������� True Type �������"
-
-#: ../../standalone/drakfont_.c:358
-msgid "please wait during ttmkfdir..."
-msgstr "���������, � ���� �� ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:362
-msgid "True Type install done"
-msgstr "����������� True Type ������� ��������"
-
-#: ../../standalone/drakfont_.c:369 ../../standalone/drakfont_.c:385
-msgid "Fonts conversion"
-msgstr "���������� �������"
-
-#: ../../standalone/drakfont_.c:373 ../../standalone/drakfont_.c:389
-#: ../../standalone/drakfont_.c:409
-msgid "type1inst building"
-msgstr "������� type1inst"
-
-#: ../../standalone/drakfont_.c:378 ../../standalone/drakfont_.c:393
-msgid "Ghostscript referencing"
-msgstr "Ghostscript �������������"
-
-#: ../../standalone/drakfont_.c:400
-msgid "ttf fonts conversion"
-msgstr "���������� ttf �������"
-
-#: ../../standalone/drakfont_.c:404
-msgid "pfm fonts conversion"
-msgstr "���������� pfm �������"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Suppress temporary Files"
-msgstr "����� temp �������"
-
-#: ../../standalone/drakfont_.c:417
-msgid "Restart XFS"
-msgstr "��������� XFS"
-
-#: ../../standalone/drakfont_.c:458 ../../standalone/drakfont_.c:468
-msgid "Suppress Fonts Files"
-msgstr "����� ���� �������"
-
-#: ../../standalone/drakfont_.c:470
-msgid "xfs restart"
-msgstr "������� xfs"
-
-#: ../../standalone/drakfont_.c:477 ../../standalone/drakfont_.c:761
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"�� ����������� ������� �����, ��������� �� �� ����� ����� �� �� ����������� "
-"� ��������� �� ����� �������.\n"
-"\n"
-"-������ ����������� ������� �� ������������ �����. � ����� �����������s, "
-"�������� ������� ���� ������� ��� X ������."
-
-#: ../../standalone/drakfont_.c:551
-msgid "Fonts Importation"
-msgstr "���� �������"
-
-#: ../../standalone/drakfont_.c:566
-msgid "Get Windows Fonts"
-msgstr "������ Windows �������"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Uninstall Fonts"
-msgstr "������������ �������"
-
-#: ../../standalone/drakfont_.c:571
-msgid "Advanced Options"
-msgstr "�������� ������"
-
-#: ../../standalone/drakfont_.c:573
-msgid "Font List"
-msgstr "����� �������"
-
-#: ../../standalone/drakfont_.c:740
-msgid "Choose the applications that will support the fonts :"
-msgstr "��������� ���������� ���� �� ���������� ������� :"
-
-#: ../../standalone/drakfont_.c:744
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:748
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:752
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:756
-msgid "Generic Printers"
-msgstr "Generic ��������"
-
-#: ../../standalone/drakfont_.c:793
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "��������� ���� ��� ������������ � �������� ��  '�����'"
-
-#: ../../standalone/drakfont_.c:829
-msgid "Install List"
-msgstr "���������� �����"
-
-#: ../../standalone/drakfont_.c:859
-msgid "click here if you are sure."
-msgstr "�������� ���� ������� ��� �������."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "� ���� ������� �����."
-
-#: ../../standalone/drakfont_.c:896
-msgid "Unselected All"
-msgstr "���������� ���"
-
-#: ../../standalone/drakfont_.c:897
-msgid "Selected All"
-msgstr "�������� ���"
-
-#: ../../standalone/drakfont_.c:898
-msgid "Remove List"
-msgstr "������ �����"
-
-#: ../../standalone/drakfont_.c:915 ../../standalone/drakfont_.c:935
-msgid "Initials tests"
-msgstr "������� ���������"
-
-#: ../../standalone/drakfont_.c:916
-msgid "Copy fonts on your system"
-msgstr "������� ������� � ������"
-
-#: ../../standalone/drakfont_.c:917
-msgid "Install & convert Fonts"
-msgstr "��������� � ��������� �������"
-
-#: ../../standalone/drakfont_.c:918
-msgid "Post Install"
-msgstr "����-�����������"
-
-#: ../../standalone/drakfont_.c:936
-msgid "Remove fonts on your system"
-msgstr "������ ������� �� �������"
-
-#: ../../standalone/drakfont_.c:937
-msgid "Post Uninstall"
-msgstr "����-�������������"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:196
-msgid "Internet Connection Sharing"
-msgstr "�e�e�� �������� �������j�"
-
-#: ../../standalone/drakgw_.c:122
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:134
-msgid "Internet Connection Sharing currently enabled"
-msgstr "�e�e�� �������� �������j� j� �������� ��������� "
-
-#: ../../standalone/drakgw_.c:135
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"���e���a�e �e�e�a �������� �������j� j� �e� ��������.\n"
-"�������� j� ���������.\n"
-"\n"
-"��� ������ �� ������e?"
-
-#: ../../standalone/drakgw_.c:139
-msgid "disable"
-msgstr "��e������"
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "dismiss"
-msgstr "������"
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "reconfigure"
-msgstr "������ ������"
-
-#: ../../standalone/drakgw_.c:142
-msgid "Disabling servers..."
-msgstr "���a��� ������e..."
-
-#: ../../standalone/drakgw_.c:150
-msgid "Internet connection sharing is now disabled."
-msgstr "�e�e�� �������� �������j� j� ��e��������."
-
-#: ../../standalone/drakgw_.c:159
-msgid "Internet Connection Sharing currently disabled"
-msgstr "�e�e�� �������� �������j� j� �������� ��e��������"
-
-#: ../../standalone/drakgw_.c:160
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"���e���a�e �e�e�a �������� �������j� j� �e� ��������.\n"
-"�������� j� ��e��������.\n"
-"\n"
-"��� ������ �� ������e?"
-
-#: ../../standalone/drakgw_.c:164
-msgid "enable"
-msgstr "�������"
-
-#: ../../standalone/drakgw_.c:171
-msgid "Enabling servers..."
-msgstr ">���������� �������..."
-
-#: ../../standalone/drakgw_.c:176
-msgid "Internet connection sharing is now enabled."
-msgstr "�e�e�� �������� �������j� j� ���������."
-
-#: ../../standalone/drakgw_.c:197
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"�a� ����j���� ������ �������� �� �e�e�� ������ �������� �������je.\n"
-"�� ���� ����j��, ����� ����j����� �� �a��j �������j ��e�� �� ���� �� "
-"������e�������� �������j� �� ���� ����j����a.\n"
-"\n"
-"�������a: ��������a ��� j� ��e��� ������� �� �� �������� ������� ��e��"
-"(LAN).\n"
-"\n"
-"�� �� ������ �� �������� �e�e�� �������� �������je ?"
-
-#: ../../standalone/drakgw_.c:223
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "�������j� %s (������e�� ����� %s)"
-
-#: ../../standalone/drakgw_.c:224
-#, c-format
-msgid "Interface %s"
-msgstr "�������j� %s"
-
-#: ../../standalone/drakgw_.c:232
-msgid "No network adapter on your system!"
-msgstr "���� ��e���� �������� � �a��� ������� !"
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"��j� ����������� ��j���� ��e��� ������a. ��������e ���� �� ����������a�� "
-"�������a."
-
-#: ../../standalone/drakgw_.c:239
-msgid "Network interface"
-msgstr "��e��� ������ej�"
-
-#: ../../standalone/drakgw_.c:240
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"�����j� ���� j���� ������������ ��e��� ������� �� �a��� �������:\n"
-"\n"
-"%s\n"
-"\n"
-"���� �������� �a�� ������� ��e�� �� ���� ���������."
-
-#: ../../standalone/drakgw_.c:249
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "��������� ��j� �� ��e��� ������� ���� �������� �a LAN��e��."
-
-#: ../../standalone/drakgw_.c:267
-msgid "Network interface already configured"
-msgstr "������ ��������� �� ��� ��������"
-
-#: ../../standalone/drakgw_.c:268
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"���������, ������ ������� (%s) i�� ��� �������.\n"
-"\n"
-"�� �� ������ �� �� ���������� ����������������?\n"
-"\n"
-"������ �� ������� ����� ��� ������ �� ����� ��� ������."
-
-#: ../../standalone/drakgw_.c:273
-msgid "Automatic reconfiguration"
-msgstr "���������� ���������������"
-
-#: ../../standalone/drakgw_.c:274
-msgid "Show current interface configuration"
-msgstr "������� �������� �������������"
-
-#: ../../standalone/drakgw_.c:276
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"�������� ������������� �� `%s':\n"
-"\n"
-"�����: %s\n"
-"IP ������ %s\n"
-"IP ��������: %s\n"
-"�������: %s"
-
-#: ../../standalone/drakgw_.c:288
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"���� �� ������� ���� �������� ������������� � ������������� �� �� ��� "
-"������� DHCP ������; � ��� ������� ��������� �� �� �� ����� ������� C-Class "
-"Network ���� ��������� �� ���� ������� �����; �� �� ���� ��������������� � "
-"���� ������ � ���� DHCP ������ �������������.\n"
-"\n"
-"�����, �� ���� �� �������������� ��� ��������� � (��)������������ DHCP "
-"������ �� ���.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:293
-msgid "C-Class Local Network"
-msgstr "C-Class ������� �����"
-
-#: ../../standalone/drakgw_.c:294
-msgid "(This) DHCP Server IP"
-msgstr "(����) DHCP ������ IP"
-
-#: ../../standalone/drakgw_.c:295
-msgid "Re-configure interface and DHCP server"
-msgstr "������������� ��������� � DHCP ������"
-
-#: ../../standalone/drakgw_.c:302
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "������� ����� ���� �������� ��`.0', bailing out."
-
-#: ../../standalone/drakgw_.c:313
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "�������j���� �������� LAN �����e � ��������� ������. %s!\n"
-
-#: ../../standalone/drakgw_.c:321
-msgid "Firewalling configuration detected!"
-msgstr "����������� Firewalling �����������ja"
-
-#: ../../standalone/drakgw_.c:322
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"������e�e ! �����je�a firewalling �����������ja je ����������a. ����a�� ���� "
-"�������� ����� ���e���a�� ����� ���������je."
-
-#: ../../standalone/drakgw_.c:329
-msgid "Configuring..."
-msgstr "K����������j� � ����..."
-
-#: ../../standalone/drakgw_.c:330
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "����������a�� �������,���������j� ��������, �����a�� �������..."
-
-#: ../../standalone/drakgw_.c:366
-#, c-format
-msgid "Problems installing package %s"
-msgstr "�������� ��� ���������j� %s �����a"
-
-#: ../../standalone/drakgw_.c:549
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"��� j� ���e����.\n"
-"���� ������ ������ �������� �������j� �� ������ ����j������� �� �a��j "
-"�������j ��e��  (LAN), ��������� ���������� ��e��� �����������j� (DHCP)."
-
-#: ../../standalone/drakgw_.c:566
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"���e���a�e �e�e�a �������� �������j� j� �e� �������� ��� j� �������� "
-"��e��������."
-
-#: ../../standalone/drakgw_.c:567
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"���e���a�e �e�e�a �������� �������j� j� �e� �������� � �������� j� ���������."
-
-#: ../../standalone/drakgw_.c:568
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "�� ���� �e�e�� �������� �������j� ��j� ���e������."
-
-#: ../../standalone/drakgw_.c:573
-msgid "Internet connection sharing configuration"
-msgstr "�����������j� �e�e�� �������� �������je"
-
-#: ../../standalone/drakgw_.c:580
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"���������� � ���� �� ���e���a�� �e�e�a �������� �������j�\n"
-"%s\n"
-"\n"
-"�������� �� ������ (Configure) �� �� ��������� ���e���a��."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "���������� ����e (%d �������a)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "������: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "������ ������..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "������ �� ����a�e:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "���� ������..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"��� ������� ���� �� ������ (���� ������ �� ������� ��� ������ ���������) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "��� �����:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "�������� �������"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "���:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "�������j�:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "������:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "����� ��� ���������"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "������ �������� �������..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN ������������a"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "���j���"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "�������j�"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "��������"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "�����"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "������ ������� �����..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "�������� ���� �� ��������� ��������� ->"
-
-#: ../../standalone/draknet_.c:257
-#, fuzzy
-msgid "Wizard..."
-msgstr "�������� (��������)"
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "�������"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "���� �������... ������� �������������"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "����������"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "��j� ����������"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "��������a��..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "�����������a�..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"���������, ����������� �� ��� ����� �������� ���������, ����� ������� ���� "
-"�����"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"�� ������ �� ����� ��������� ���� �� �������.\n"
-"������ �� ���� �������� ������ �� 'Configure'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN ������������a"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "�����e� %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "�������(Boot) ��������"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "��������� ��� �����a��"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP ���j���"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "��������� ���"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "����������� ���"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"���� ��������� ��� ���� ���� �������.\n"
-"��������� ��������������� ��������� � ������� �������"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"�� ������ �� ����� �������� �������� ���������.\n"
-"��������� �� ������ �� 'Configure'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "�����������j� �������� �������j�"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "�����������j� �������� �������j�"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "��� ���������: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "���������"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "��e��� ������a"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP ���j���"
-
-#: ../../standalone/draksec_.c:51
-msgid "Setting security level"
-msgstr "���������� ����������� �����"
-
-#: ../../standalone/draksec_.c:57
-#, fuzzy
-msgid "Setting security user"
-msgstr "���������� ����������� �����"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "��������� ������"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "��������� ���� ���� ������ �� ���������"
-
-#: ../../standalone/drakxtv_.c:55
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Canada (cable)"
-msgstr "������ (����)"
-
-#: ../../standalone/drakxtv_.c:72
-#, fuzzy
-msgid "USA (broadcast)"
-msgstr "��� (bcast)"
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable)"
-msgstr "��� (����)"
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable-hrc)"
-msgstr "��� (����-hrc)"
-
-#: ../../standalone/drakxtv_.c:73
-#, fuzzy
-msgid "China (broadcast)"
-msgstr "���� (bcast)"
-
-#: ../../standalone/drakxtv_.c:73
-#, fuzzy
-msgid "Japan (broadcast)"
-msgstr "����� (bcast)"
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (cable)"
-msgstr "����� (����)"
-
-#: ../../standalone/drakxtv_.c:74
-msgid "East Europe"
-msgstr "������� ������"
-
-#: ../../standalone/drakxtv_.c:74
-#, fuzzy
-msgid "France [SECAM]"
-msgstr "��������a"
-
-#: ../../standalone/drakxtv_.c:74
-msgid "Ireland"
-msgstr "�����"
-
-#: ../../standalone/drakxtv_.c:74
-msgid "West Europe"
-msgstr "������� ������"
-
-#: ../../standalone/drakxtv_.c:75
-msgid "Australia"
-msgstr "����������"
-
-#: ../../standalone/drakxtv_.c:75
-msgid "Newzealand"
-msgstr "���� ������"
-
-#: ../../standalone/drakxtv_.c:76
-#, fuzzy
-msgid "South Africa"
-msgstr "����� ������"
-
-#: ../../standalone/drakxtv_.c:77
-msgid "Argentina"
-msgstr "���������"
-
-#: ../../standalone/drakxtv_.c:113
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"����� ��� ��\n"
-"������� ��� tv ������ � �����"
-
-#: ../../standalone/drakxtv_.c:115
-msgid "TV norm :"
-msgstr "TV ������ :"
-
-#: ../../standalone/drakxtv_.c:116
-msgid "Area :"
-msgstr "�������� :"
-
-#: ../../standalone/drakxtv_.c:120
-msgid "Scanning for TV channels in progress ..."
-msgstr "��������� TV ������ � ���� ..."
-
-#: ../../standalone/drakxtv_.c:128
-msgid "Scanning for TV channels"
-msgstr "��������� �� TV ������"
-
-#: ../../standalone/drakxtv_.c:131
-#, fuzzy
-msgid "There was an error while scanning for TV channels"
-msgstr "������ ��� ���������j� �����a:"
-
-#: ../../standalone/drakxtv_.c:132
-msgid "XawTV isn't installed!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:135
-msgid "Have a nice day!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:136
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:148
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:149
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "��������: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "����  �������� ��������� ������ ?"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "�� �� ������ �� BackSpace �� ����� Delete � �������?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "������� Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"������e �a� ������������ CD � ����� � ���������� OK ���a ��� �������.\n"
-"������� �� ������ ���������� ������� �� �� ������� live upgrade."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "�� ���� �� ������j�� live upgrade !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:516
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "������� ���� �� �������� ���"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/�������a/_���a"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/�������a/_������"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/�������a/_�����"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/�������a/����� _K��"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/��j�/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_����je"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/����j�/����"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_�����"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/�����/_�..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "��������"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "������"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "�yslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Mandrake ����� �� ���������"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "�����"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "���� �� ���������� ��� ��������"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "������"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "���������"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "��� �� ������� ��"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "������� ��������"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "��������"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "������� ���������"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:392
-msgid "Mail/SMS alert"
-msgstr "Mail/SMS �����"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "����� ��� ���������, �������� ��������: %s"
-
-#: ../../standalone/logdrake_.c:407
-msgid "Mail/SMS alert configuration"
-msgstr "������������� ������ �� Mail/SMS"
-
-#: ../../standalone/logdrake_.c:408
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"���������� � ���� �� ������������� mail/SMS\n"
-"\n"
-"���� ������ �� �������� ������� ������.\n"
-
-#: ../../standalone/logdrake_.c:416
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:419
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:420
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:421
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:424
-msgid "service setting"
-msgstr "���������� �������"
-
-#: ../../standalone/logdrake_.c:425
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"�������� �� ����� ������� ����� �� ��������� ������� ������ ���� �������"
-
-#: ../../standalone/logdrake_.c:435
-msgid "load setting"
-msgstr "������ ��������"
-
-#: ../../standalone/logdrake_.c:436
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "�������� �� ����� ������� �� ������� ���� �� ��� ���������"
-
-#: ../../standalone/logdrake_.c:449
-msgid "alert configuration"
-msgstr "������������a ������"
-
-#: ../../standalone/logdrake_.c:450
-msgid "Configure the way the system will alert you"
-msgstr "�������� ����� �� ���� �� ��� ������ ����������"
-
-#: ../../standalone/logdrake_.c:493
-msgid "Save as.."
-msgstr "����� K��..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "��������e ��� ����"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "���� �������� serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "�� �������� ��� 3 �������?"
-
-#: ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "�������� ������� �� ������� ..."
-
-#: ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "�������j�� ��e��je..."
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s �������� �� %s, �� �� �� �� ������� ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "��������� ������"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "���� %s ������ ���� �������"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "������� (boot) ������"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Firewalling �����������ja"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Firewalling �����������ja"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"�� ��� �e� �������� firewall.\n"
-"�������� �� ������(Configure) �� �� �������� ��� �������� firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"�������� �� ������(Configure) �� �� �������� ���������� firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "��������� �����"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "��������� ����.�����"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "��������� ���� ����a"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "���������� ����"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "������� ���������"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "���������"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "������ �����e��� �������"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "���������j �������je"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "������ �� �����������"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "���������� ������"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "����� ���������"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "������ �����"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "������ �������"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "���������� �������"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "������� ������� ����"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "������������� X-a"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "���������� ��������� update-���"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "����� �� �����������"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"���� firewall ������������\n"
-"\n"
-"�� ����������� ����� firewall �� ��� Mandrake Linux �a����.\n"
-"�� ����� firewall �e���e, �������j�e\n"
-"�����j��������� MandrakeSecurity Firewall ����������j�."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"���� ���� ��� ��������� ���a�� � ���� ��j� ������e �� ����� �� ��������e\n"
-"�� �� ���e�� �� ��������.  ���������� �a����� � ����e\n"
-"���a��, j�� j� ���������� �a��� ����j����� �a��a.\n"
-"\n"
-"������� �������� �� ��������e j���� �� ���� ������a, �������� firewall\n"
-"�a ���.  ������ ��������� ��� ����je ���� ���a �������� ������a���\n"
-"��� ��������je!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"�� �� ����e���� web ������ �� ���j �a���� ��j� ����� �� ���e �����\n"
-"�� ����� ���������? ������� ����e���� webserver ��j� ����� �� ���e �����\n"
-"���� �� ��� �a���e, ���� ������ �� �������� ���������e �E.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"�� �� ����e���� name ������ �� ���j �a����? ������� ����� �������� j�� "
-"j����\n"
-"�� away IP � ������ ���������j� �� ���� ��������, �����\n"
-"��� �� ���������� �e.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"�� �� ������ �� ��������� Secure Shell (ssh) �������je? ���\n"
-"j� ������ �� ������ ��j� ������ ��������� �� ���j���. ������� ��������e\n"
-"������, ������� �� �� �� ��������� �a ssh. �����e� ��je\n"
-"����������� -- ���� �� ���� �����a�� ���� ������� ������� ������� je\n"
-"��������e. ssh j� ����������� � �� ���������� ������ ������."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"�� �� ������ �� ��������� telnet �������je?\n"
-"��� j� ������ ��������, ���� ��� � ��j������ �� ���������� ������. ��\n"
-"��� ���������j��� �� ���� ���������� �E � �� ��������� ssh ������\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"�� �� ����e���� FTP ������ ��j� ��� j� ��������\n"
-"�� ��������? ������� �� �����e, ���������j��� �� ��������e ���� �a\n"
-"Anonymous ��������e. ���� ��j� ������a ������� ����� FTP ���� ����\n"
-"���� �����a��, �����  FTP ������ ������� ����������e ������e.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"�� �� ����e���� mail ������? ������� �a���� ������ �����\n"
-"pine, mutt ��� ����� ������ ����������� mail ���j���a,\n"
-"���� �� ��������� ��������e.  ��a�e, ������� �� �a �������� firewall �� "
-"���.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"�� �� ����e���� POP ��� IMAP ������? ��� �� ��������� \n"
-"�� host-��a�e non-web-���������  mail �a���a �� ���e �����\n"
-"��� �a���e.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"������� �� ��������� 2.2 ������.  ������� j� �a� ��e��� IP\n"
-"���������� ���e��� �� ����j���� � �a��j ���� ��� �� ����� \n"
-"(���e���� ���������), ����� �� �� ��������� �� ���.  �a\n"
-"�� j� ��� � ���a��?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"�� �� �a� ����j���� ����j� ����� �������������� �a ������ ����j������?\n"
-"�������� �� ��� ������� �a �������-������� Unix/Linux ����������j��a\n"
-"���� ������������j� ������� ���j��� ��� �� ������ ������.  ������� ����� "
-"���\n"
-"������ ����� ��� ����� ���� �� ���, ���� ��������e \n"
-"���."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"�����������j� ��������. �� �� �� �������� ��� ������ �� ����?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "�� ���� �� �������  %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "�� ���� �� ������� %s ���� ����a: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Firewalling �����������ja"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "�a�� �������, ��������� �����������"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "������, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "��e��� ����j����, (���j���)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS ������, SMB ������, Proxy ������, SSH ������"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome ����a ������a"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "����� �� Palm Pilot ��� Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "����� ������a"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "������, Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "��� ������ � ������ ������������ ������"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Office ��������: ����� ��������� (kword, abiword), �����e (kspread, "
-"gnumeric), pdf �����������, ���"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "����� a����: mp3 ��� midi ���j���,�������, ���"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "K���� � ����? (Howto's) �� Linux � ��������� �������"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE ����� ������a"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ���"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "���������ja - �����"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "��� ����� �� ��.�����, �����, web, �������� �������a, ��� chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "������,���� �������a"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ��� MySQL ������ �� ���� ��������"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "����� �� ���� ����������a�� ����j����a"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "���������ja - ����"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "�����������ja"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "�������� �����"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix mail ������, Inn news ������"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "�������� ������a"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "���������j���� ������a"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "������������a"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "J�� ��������� �����e�a (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K ������� �����e��, ������� �������� �����e�� �a �������j�� ����e��� ����a"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "�������� �����e�e"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "����� �� �����a�� � ���e�� CDa"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "�����(Office) ������a"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "������"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ���"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "�������� �������� ��� ��� j� Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C � C++ �����j�� ���������e, ��������  � ��������� �������e"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "������ ������"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "������, ��.�����/Groupware/�����"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "������� �� ����"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "����� ���j��� � �������"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "���������ja - ������a"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "������� ��������: ������, ��� �� �����, ��������j�, ���"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"���� ����� �� ���a�� � ��a�� ��.����� � ����� (pine, mutt, tin..) � �� "
-"�����a���a�e ��������a"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "����� �������je"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"�������� �����e�� �� ����� ���������NFS server, SMB server, Proxy serverNFS "
-"server, SMB server, Proxy server�� ��������j� � �����������a"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "���j���� �� ��������� ��������� ������j��� � ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "�������� gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "�������� �� ����a�� ����a � ����a"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "����� �������� ����������"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "�������,������, ����� �� ��������, ���������"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "�������� �� ������a�� �a��� �������j��a, ��� ��� j� gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "������a�� ��������� ���������j��a"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "���������ja - CD ���e��"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "�����a ����� ������a"
diff --git a/perl-install/share/po/sr.po b/perl-install/share/po/sr.po
deleted file mode 100644
index a66d77b3b..000000000
--- a/perl-install/share/po/sr.po
+++ /dev/null
@@ -1,12449 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999,2000,2001 Mandrakesoft
-# Jankovic Tomislav <tomaja@net.yu> 1999,2000,2001
-#
-#
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-04 19:39GMT+1\n"
-"Last-Translator: Toma Jankovic_<toma@mandrake.co.yu>\n"
-"Language-Team: Serbian <office@mandrake.co.yu>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Podesi sve glave nezavisno"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Koristi Xinerama ekstenziju"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Podesi samo karticu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Multi-head konfiguracija"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Va� sistem podr�ava multiple head konfiguraciju.\n"
-"Da li to �elte da uradite?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafi�ka kartica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Izaberite karticu"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Izaberite X server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Izaberite X server"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Koju XFree konfiguraciju �elite da imate ?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va�a kartica mo�e imati 3D hardversku akceleraciju ali samo sa XFree %s.\n"
-"Va�u karticu podr�ava XFree %s koji mo�e imati bolju podr�ku i za 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Va�a kartica mo�e imati 3D hardversku akceleraciju sa XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s sa 3D hardverskom akceleracijom"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Va�a kartica mo�e imati 3D hardversku akceleraciju ali samo sa XFree %s,\n"
-"ZAPAMTITE da je ovo EKSPERIMENTALNA podr�ka za 3D i mo�e dovesti do "
-"blokiranja ra�unara."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s sa EKSPERIMENTALNOM 3D hardverskom akceleracijom"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va�a kartica mo�e imati 3D hardversku akceleraciju ali samo sa XFree %s,\n"
-"ZAPAMTITE da je ovo EKSPERIMENTALNA podr�ka za 3D i mo�e dovesti do "
-"blokiranja ra�unara.\n"
-"Va�u karticu podr�ava XFree %s koji mo�e imati bolju podr�ku i za 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (Instalacija displej drajver)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfiguracija"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Koli�ina memorije na grafi�koj kartici"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Opcije za server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Izaberite monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Morate da navedete horizontalni sinhronizacioni opseg va�eg monitora.\n"
-"Mo�ete ga ili izabrati iz unapred zadatih vrednosti koje odgovaraju\n"
-"industrijskim standardima monitora, ili da navedete odre�eni opseg.\n"
-"\n"
-"VEOMA JE VA�NO da ne navedete tip monitora koji ima ovaj opseg ve�i nego\n"
-"�to ga ima va� monitor. Ako niste sigurni, odaberite manje vrednosti."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontalna frekvencija"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikalna frekvencija"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor nije konfigurisan"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafi�ka karta jo� nije konfigurisana"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Rezolucija jo� nije izabrana"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Da li ho�ete da testirate konfiguraciju?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Upozorenje: testiranje ove grafi�ke kartice mo�e zamrznuti va� kompjuter"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Testiranje konfiguracije"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"poku�ajte sa promenom parametara"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Hm, gre�ka:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Izlaz za %d sekundi"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Da li je ovo ispravno pode�eno?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Hm, pojavila se gre�ka, probajte da promenite parametre"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rezolucija"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Izaberite rezoluciju i broj boja pri prikazu"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafi�ka kartica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Jo�"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "U redu"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspertni mod"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Prika�i sve"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rezolucija"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tip tastature: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tip mi�a: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Mi� je postavljen na ure�aj: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor - horizontalna frekvencija: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor - vertikalno osve�avanje: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafi�ka kartica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikacija grafi�ke kartice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memorija na grafi�koj kartici: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Broj boja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolucija: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 drajver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Provera konfiguracije za X-Window sistem"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "�ta �elite da uradite?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Promena monitora"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Promena grafi�ke kartice"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Promena Server opcija"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Promena rezolucije"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Prika�i informacije"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Testiraj ponovo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Kraj"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Sa�uvaj promene?\n"
-"Trenutna konfiguracija je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X okru�enje na startu"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ja mogu podesti va� ra�unar da automatski podi�e X okru�enje pri startanju.\n"
-"Da li �elite X okru�enje pri restartu ?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Molim, ponovo unesite %s radi aktiviranja promena"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Molim va� izlogujte se i restartujte (Ctrl-Alt-BackSpace) ra�unar"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 boja (8-bitna paleta)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 hiljade boja (15-bitna paleta)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 hiljada boja (16-bitna paleta)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliona boja (24-bitna paleta)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde boja (32-bitna paleta)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB ili vi�e"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardni VGA, 640x480 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompat., 1024x768 na 87 Hz sa preplitanjem (ne 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 na 87 Hz sa preplitanjem, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 na 60 Hz, 640x480 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA bez preplitanja, 1024x768 na 60 Hz, 800x600 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Visokofrekventni SVGA, 1024x768 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor koji radi sa 1280x1024 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor koji radi sa 1280x1024 na 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor koji radi sa 1280x1024 na 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor koji radi sa 1600x1200 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor koji radi sa 1600x1200 na 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Prvi sektor startne particije"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor diska (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO instalacija"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Gde biste da instalirate starter?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalacija"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO sa tekstualnim menijem"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO sa grafi�kim menijem"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Startanje iz DOS/Windows-a (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Glavne opcije startera"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Starter koji �e se koristiti"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalacija startera"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Startni (boot) ure�aj"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne radi na starim BIOS-ima)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video mod"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Pauza pre startanja default image-a"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Lozinka"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Lozinka (ponovite)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Ograni�ena komandna linika - opcije"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ograni�eno"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "O�isti /tmp pri svakom startanju"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Defini�i veli�inu RAM ako je potrebno (detektovano je %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Omogu�i multi-profile"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Prika�i veli�inu RAM-a u Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opcija``Ograni�ena komandna linika - opcije'' je neupotrebljiva bez lozinke"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Probajte ponovo"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Nepodudarnost lozinki"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Inicijalna poruka"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Otpo�ni Firmware pauzu"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Pauza pri startanju kernela"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Omogu�i startanje sa CD-a?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Omogu�i OF startanje?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Podrazumevani OS ?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ovo su postavljne opcije.\n"
-"Mo�ete dodati nove ili izmeniti stare."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Ura�eno"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Promeni"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Koju vrstu unosa dodajete ?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Drugi OS-ovi (SunOS,BSD,...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Drugi OS-ovi (MacOS,BSD,...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Drugi OS-ovi (Windows,BSD,BeOS,...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Slika"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Dodatak"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "�itanje-pisanje RW"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nesigurno"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Oznaka"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Podrazumevano"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-veli�ina"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Uklanjam unos"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Prazna oznaka nije dozvoljena"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Morate specificirati kernelov image"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Morate odrediti root particiju"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ova oznaka je ve� u upotrebi"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Prona�eno  %s %s interfejsa"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Da li imate jo� jedan?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Imate li jo� %s interfejsa?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Pogledaj informacije o hardveru"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaliram drajver za %s karticu %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koji %s drajver da probam?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"U nekim slu�ajevima, drajver %s zahteva dodatne informacije\n"
-"za pravilan rad, mada mo�e lepo da radi i bez njih. Da li ho�ete\n"
-"sami da unesete dodatne podatke za njega, ili da ih drajver sam odredi?\n"
-"Mogu�e je da �e proba zaglaviti va� ra�unar, ali ne�e naneti nikakvu �tetu."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatska proba"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Navedite opcije"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Mo�ete navesti njegove opcije za modul %s.\n"
-"Opcije su u formatu ``ime=vrednost ime2=vrednost2 ...''.\n"
-"Na primer, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opcije modula:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Podizanje modula %s neuspelo.\n"
-"Da li �elite poku�ate ponovo sa drugim parametrima ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "pristup X programima"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "pristup rpm alatima"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "dozvoli \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "pristup administrativnim fajlovima"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s ve� postoji)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ova lozinka je previ�e prosta"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Odredite korisni�ko ime"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Korisni�ko ime mo�e sadr�ati samo mala slova, brojeve, `-' i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ovo korisni�ko ime ve� postoji"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Dodaj korisnika"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Unesi korisnika\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Prihvati korisnika"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Pravo ime"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Korisni�ko ime"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Auto logovanje"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ja mogu podesti va� ra�unar da automatski uloguje jednog korisnika.\n"
-"Da li �elite da korisitite ovu opciju ?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Izaberite default (osnovnog) korisnika:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Izaberite window menadzer koji �elite da koristite:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "IZaberite koji jezik �elite da korisitite."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Mo�ete izabrati drugi jezik koji �e biti dostupan posle instalacije "
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Sve"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Dozvoli sve korisnike"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Izbor po �elji"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Nema zajedni�kog deljenja"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paket %s mora biti instaliran. Da li �elite da ga instalirate?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Mo�ete eksportovati koriste�i NFS ili Samba-u. Koji od ova dva �elite"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Teku�i paket %s nedostaje"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Obustavi"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Dobro�li kod Krakera"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Bedna"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardni"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Velika"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Velika"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidna"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Na ovom nivou treba obratiti pa�nju. On pravi va� sistem lak�im\n"
-"za upotrebu, ali i  veoma osetljivim: ne sme biti kori�ten na ma�ini\n"
-"koja je povezana sa drugim ma�inama ili na internet. Ovde ne postoji\n"
-"pristup sa lozinkom."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Lozinke su sada omogu�ene, ali se i dalje ne preporu�uje da se koristi\n"
-"kao mre�ni ra�unar."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ovo je standardno sigurnosno okru�enje preporu�eno za ra�unare\n"
-"koji  �e biti  kor��eni za vezu sa Internetom ili kao klijent.\n"
-"Ne postoje sigurnosne provere."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Sa ovim sigurnosnim nivoom, kori��enje ovog sistema kao servera\n"
-"postaje mogu�e. Sigurnost je sada dovoljno velika za kori��enje\n"
-"ma�ine za server koji prihvata konekcije brojnih klijenata."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Uklju�ujete nivo 4 opcija, ali je sada sistem potpuno zatvoren.\n"
-"Sigurnosne opcije su maksimalne."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Izaberite sigurnosni nivo"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Sigurnosni nivo"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Koristi libsafe za servere"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "Biblioteka koja �titi od buffer overflow-a i format string napada."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Dobrodosli u %s, menadzer za startanje operativnih sistema !\n"
-"\n"
-"Izaberite operativni sistem, ili\n"
-"sacekate %d sekundi za startanje pretpostavljenog OS.\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobrodosli u GRUB  starter operativnog sistema !"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Koristi  %c i %c slova da bi oznacili izbor"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite enter za podizanje izabranog OS,'e' za promenu "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandi pri  podizanju sistema,ili  'c' za komandnu liniju "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Oznaceni izbor se podize automatski za %d sekundi"
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nema dovoljno mesta u /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start meni "
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ne mo�ete da instalirate starter na particiju %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pomo� jo� nije implementirana.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguracija stila startanja"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Datoteka"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Monitor za kategorizaciju"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicionalni Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicionalni Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Pokreni Auroru pri startanje"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grub mod"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot mod"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Trenutno koristite %s kao Boot menad�er \n"
-"Kliknite na Podesi (Configure) da bi pokrenuli pode�avavanje."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Podesi"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistemski mod"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Pokreni X-Window sistem pri stratanju"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne, ja ne �elim autologovanje"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, ja �elim autologovanje sa ovim(korisnik,desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "U redu"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ne mogu otvoriti /etc/inittab za �itanje: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuta"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minut"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundi"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Ne mogu da napravim snimak pre particioniranja"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Snimci �e biti dostupni nakon instalacije u %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francuska"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Kostarika"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgija"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "�e�ka"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Nema�ka"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Gr�ka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norve�ka"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "�vedska"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Holandija"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italija"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austrija"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "SAD"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Molim vas, prvo napravite kopiju va�ih podataka"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "PA�LJIVO PRO�ITAJ !"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ukoliko planirate da koristite  aboot, ostavite prazan prostor (2048 "
-"sektorana po�etku \n"
-"diska)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Gre�ka"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "�arobnjak (pomo�nik)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Izaberite akciju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Disk sadr�i jednu veliku FAT particiju\n"
-"(uglavnom je koriste MicroSoft Dos/Windows-i, na �alost).\n"
-"Predla�em da prvo izmenite veli�nu (resize) te particije (kliknite na nju,\n"
-"a potom na \"Promeni veli�inu\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Kliknite na particiju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalji"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Prazno"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Drugo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Vrsta fajl sistema:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Kreiraj"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tip"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Umesto toga probajte ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Obri�i"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Prvo uradite ``Demontiraj''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Posle promene tipa particije %s, svi podaci na ovoj particiji �e biti "
-"izbrisani"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Izaberite particiju"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Izaberite drugu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Izlaz"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Pre�i na ekspert mod"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Pre�i na normalni mod"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Poni�ti radnju"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Svejedno nastaviti ?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Kraj bez snimanja promena"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Kraj bez snimanja promena u tabele particija?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Da li ho�ete da sa�uvate izmene u /etc/fstab?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Auto dislociranje"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "O�isti sve"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informacije o hard disku"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Sve primarne particije su zauzete"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ne mogu dodati vi�e ni jednu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Da bi omogu�ili kreiranje jo� (extended) particija izbri�ite jednu od "
-"postoje�ih"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Sa�uvaj tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Obnovi tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Spasi tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ponovo u�itaj tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automontiranje prenosivog medija"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Izaberite datoteku"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Pohranjena(snimljena) tabela particija nije iste veli�ine\n"
-"�elite da nastavite ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Upozorenje"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ubacite disketu u ure�aj\n"
-"Svi podaci na disketi �e biti izbrisani !"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Spasavanje tabele particija"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detaljne informacije"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Ta�ka montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcije"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Promeni veli�inu"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Premesti"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatiranje"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montiraj"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Dodaj na RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Dodaj na LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Demontiraj"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Ukloni sa RAID-a"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Ukloni sa LVM-a"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Promeni RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Koristi za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Kreiraj novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Po�etni sektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Veli�ina u MB:"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Vrsta tatote�nog sistema:"
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Ta�ka montiranja: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Karakteristike: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Ukloni loopback fajl ?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Promena tipa particije"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Koju  datote�ni sistem �elite ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Menjam ext2 na ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Gde biste da montirate loopback datoteku  %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gde biste da montirate %s ure�aj ?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Demontiranje nije mogu�e,jer se particija korisiti za loop back.\n"
-"Prvo uklonite loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Prora�unavam granice FAT datote�nog sistema"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Promena veli�ine (resizing)"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ovoj particici nije mogu�e promeniti veli�inu"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Cvi podaci na ovoj particiji bi trebali biti sa�uvani"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Posle promene veli�ine %s particije svi podaci �e biti izbrisani"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Izaberite novu veli�inu"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nova veli�ina u MB:"
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Koji disk �elite da premestite?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Gde �elite da instalirate starter?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Preme�tanje"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Preme�tanje particije..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Izaberi postoje�i RAID za dodavanje"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novi"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Izaberi postoje�i LVM za dodavanje"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM ime?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ova particija ne mo�e biti kori��ena za loopback "
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Ime Loopback datoteke: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Odredite ime fajla"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Fajl se ve� koristi od strane drugog loopback-a,izaberite drugi"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Datoteka ve� postoji.Da li da ga koristim ?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opcije montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Razno"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "ure�aj"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivo"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "chunk veli�ina"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "PA�LJIVO,ova operacija je opasna."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Koju vrstu particioniranja?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Nije mogu�e kreirati /boot za sada na hard disku (na cilindru > 1024).\n"
-"Ili koristite LILO koji ne radi, ili ga ne koristite pa vam ne treba /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Particija koju ste izabrali za root (/) je fizi�ki locirana iznad\n"
-"1024-tog cilindra hard diska,i nemate /boot particiju.\n"
-"Ukoliko planirate da korisitite LILO boot menad�er, morate\n"
-"dodati /boot particiji."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Izabrali ste softversku RAID particiju kao root (/).\n"
-"Nijedan starter ne mo�e da radi sa tim bez /boot particije.\n"
-"Zato pazite da dodate /boot particiju"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabela particija za ure�aj %s �e biti zapisana na disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Morate restartovati ra�unar da bi se izmene izvr�ile"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Posle formatiranja particije %s,svi podaci na ovoj particiji �e biti "
-"izbrisani"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatiranje"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiranje loopback datoteke %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiranje particije %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Sakrij fajlove"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Premesti fajlove na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Direktorijum %s ve� sadr�i neke podatke\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Preme�tanje fajlova na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiranje %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Uklanjanje: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "particija %s je sada poznata kao %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Ure�aj: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Oznaka DOS particije: %s (samo pretpostavka)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Unesi: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ime: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Po�etak: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Veli�ina: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektora"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindar %d do cilindra %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatirano\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nije formatirano\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montirano\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback fajl(ovi): \n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Boot particija po default-u\n"
-"   (za podizanje MS-DOSa, ne za lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivo %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Chunk-uj %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Ime Loopback datoteke: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Najverovatnije je, da je ova particija\n"
-"Driver particija, pa nebi trebali\n"
-"da je dirate.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ovo je specijalna Bootstrap\n"
-"particija i koristi se\n"
-"dual-booting va�eg sistema.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Veli�ina: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tip tabele particija : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na busu %d ID %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcije: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Klju� za enkripciju fajl sistema"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Izaberite klju� za enkripciju fajl sistema"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Ova lozinka(enkripcioni klju�) je suvi�e jednostavna (treba da ima bar %d "
-"znakova)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Nepodudarnost enkripcionih klju�eva (lozinki)"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Klju� za enkripciju"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Klju� za enkripciju (ponovo)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Promena tipa"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Kliknite na medij"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS server"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s Formatiranje  %s nije uspelo"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ne znam kako da formatiram %s u tipu %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck provera nije uspela sa kodom %d ili signalom %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Gre�ka pri demontiranju %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednostavno"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ne mo�ete koristiti JFS za particije manje od 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ne mo�ete koristiti ReiserFS za particije manje od 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Ta�ke montiranja moraju da po�inju sa vode�im /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ve� postoji particija sa ta�kom montiranja %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ne mo�ete koristiti logi�ku LVM particiju za ta�ku montiranja %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ovaj direktorijum treba da ostane u root-u  datote�nog sistema"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Potreban vam je pravi datote�ni sistem (ext2, reiserfs) za ovu ta�ku "
-"montiranja\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Ne mo�ete koristiti enkriptovani fajl sistem za ta�ku montiranja %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nema dovoljno slobodnog prostora za auto-alociranje"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nema �ta da se uradi"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Gre�ka pri otvaranju %s za ispis: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Dogodila se gre�ka - nije na�en ispravan ure�aj na kojem bi bili krerani "
-"novi datote�nog sistemi. Proverite va� hardver da vidite �ta je uzrok ovog "
-"problema."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nemate nijednu particiju!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux je vi�ekorisni�ki sistem, a to zna�i da svaki korisnik mo�e imati "
-"sopstvene\n"
-"postavke, sopstvene fajlove, itd. Mo�ete pro�itati ``Upustvo za korisnike''\n"
-"da bi saznali vi�e o tome. Ali za razliku od \"root\", koji je ustvari "
-"administrator, korisnici\n"
-"koje dodate ovde ne�e mo�i da menjaju bilo �ta osim njihovih\n"
-"fajlova i njihove konfiguracije. Trebalo bi da kreirate najmanje jednog\n"
-"obi�nog korisnika za sebe. Taj ra�un je onaj na koji treba da se logujete \n"
-"za rutinsko kori��enje. Iako je veoma prakti�no da se ulogujete kao \"root\" "
-"svaki dan,\n"
-"to mo�e biti veoma opasno! I najmanja gre�ka mo�e zna�iti da va� sistem\n"
-"ne�e vi�e raditi. Ukoliko napravite ozbiljne gre�ke kao obi�ni korisnik \n"
-"mo�ete jedino izbgubiti ne�to informacija, ali ne i celi sistem.\n"
-"\n"
-"Prvo, morate da unesete va�e pravo ime. Ovo nije neophodno, naravno -\n"
-"jer mo�ete pristupiti i izmeniti ga kada god �elite. DrakX �e tada uzeti "
-"prvu\n"
-"re� koji ste uneli i staviti ga u prostor za uno�enje imena korisnika "
-"\"User\n"
-"name\". Ovo je ime koje odre�eni korisnik treba da koristi pri logovanju na\n"
-"sistem. Mo�ete ga promeniti. YNakon toga morate uneti lozinku ovde.\n"
-"Obi�ni, ne-privilegovani korisni�ka lozinka nije od ve�eg zna�aja kao ona "
-"za\n"
-"\"root\" koriosnika sa sigurnosne ta�ke gledanja, ali to nije razlog za "
-"opu�tanje\n"
-"- nakon svega, va�i fajlovi su u pitanju.\n"
-"\n"
-"Ukoliko kliknete na Prihvati korisnika \"Accept user\", mo�ete dodati jo� "
-"korisnika. Dodajte\n"
-"korisnika za svakog va�eg prijatelja: za va�eg oca ili sestru, na\n"
-"primer. Kada zar�ite dodavanje svih �eljenih korisnika, izaberite Zvr�eno "
-"\"Done\".\n"
-"\n"
-"Klikom na taster Napredno \"Advanced\" mo�ete izmeniti default \"shell\"\n"
-"za trenutnog korisnika (bash po default)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Iznad se nalazi lista postoje�ih Linux particija koje su detektovane\n"
-"na hard disku. Mo�ete zadr�ati izbor koji je napravio �arobnjak, jer je "
-"dobar za a\n"
-"op�tu upotrebu. Ukoliko promenite izbor, morate bar izabrati root\n"
-"particiju (\"/\"). Nemojte da birate suvi�e malu particiju jer ne�ete mo�i "
-"da\n"
-"instalirate ovoljno softvera. Ukoliko �elite da podatke staviljate na "
-"posebnu particiju ,\n"
-"morate da izaberetei i \"/home\" (mogu�e je ukoliko imate vi�e od jedne\n"
-"Linux particije).\n"
-"\n"
-"\n"
-"Informacija: svaka particija je prikazana na slede�i na�in: \"Ime\", "
-"\"Kapacitet\".\n"
-"\n"
-"\n"
-"\"Ime\" je kodirano na slede�i na�in: \"tip hard diska\", \"broj hard diska"
-"\",\n"
-"\"proj particije\" (na primer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk IDE ure�aj i  \"sd\"\n"
-"ukoliko je SCSI hard disk.\n"
-"\n"
-"\n"
-"\"Broj hard diska\" je uvek slovo posle \"hd\" ili \"sd\". Za IDE hard "
-"diskove:\n"
-"\n"
-"   * \"a\" zna�i  \"master hard disk na primarnom  IDE kontroleru\",\n"
-"\n"
-"   * \"b\" zna�i \"slave hard disk na primarnom IDE kontroloeru\",\n"
-"\n"
-"   * \"c\" zna�i \"master hard disk na sekundranom IDE kontroloeru\",\n"
-"\n"
-"   * \"d\" zna�i \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"\n"
-"Sa SCSI hard diskovima, a \"a\" zna�i \"primarni hard disk\", a \"b\" zna�i "
-"\"sekundarni hard disk \", itd..."
-
-#: ../../help.pm_.c:72
-#, fuzzy
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux instalacija se nalazi na nekoliko diskova iliti CDROM-ova. "
-"DrakX\n"
-"zna ukoliko da ukoliko je selktovani paket lociran na drugom CDROM-u i "
-"izbaci�e\n"
-"ctrenutni  CD te tra�iti od vas da ubacite odgovaraju�i."
-
-#: ../../help.pm_.c:77
-#, fuzzy
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Sada je vreme da odredimo koje programe �elite da instalirate na va�\n"
-"sistem. Postoje hiljade paketa dostupnih za instalaciju na Mandrake Linux, "
-"i \n"
-"predpostavljamo da ne morate da ih sve poznajete, naravno.\n"
-"\n"
-"Ukoliko izvodite standardnu instalaciju sa CDROM-a, prvo �ete biti\n"
-"upitani da da specificirate koje CD-ove imate (samo u Expert modu). "
-"Proverite\n"
-"oznake na CD-ovima i ozna�ite one koje posedujete\n"
-"za instalaciju. Kliknite na U redu \"OK\" kada ste spremni da nastavite.\n"
-"\n"
-"Paketi su sortirani u grupe u odnosu na odgovaraju�u upotrebu na va�oj\n"
-"ma�ini. Same grupe su sortirane u �etiri sekcije:\n"
-"\n"
-" * \"Radna stanica\": ukoliko planirate da koristite va�u ma�inu kao radnu "
-"stanicu, izaberite\n"
-"jednu ili vi�e odgovaraju�ih grupa.\n"
-"\n"
-" * \"Razvoj\": ukoliko ma�ina treba da se koristi za programiranje, "
-"izaberite �eljenu(e)\n"
-"grupu(e).\n"
-"\n"
-" * \"Server\": ukoliko �e se ma�ina koristiti kao server, mo�i �ete da \n"
-"izaberete koje od naj�e��ih servisa�elite da instalirate na\n"
-"ma�inu.\n"
-"\n"
-" * \"Grafi�ko Okru�enje\": na kraju, ovde �ete izabrati va�e\n"
-"omiljeno grafi�ko okru�enje. Morate izabrati bar jedno da bi imali\n"
-"grafi�ku radnu stanicu!\n"
-"\n"
-"Kretanjem kursora mi�a preko imena grupe dobi�ete kratko obja�njenje\n"
-"o toj grupi. Ukoliko ne selektujete ni jednu grupu kada izvodite\n"
-"osnovnu instalaciju (za razliku od a�uriranja), pojavi�e se dijalog\n"
-"sa razli�itim predlozima za minimalnu instalciju:\n"
-"\n"
-" * Instalira�e minimano potrebno za rad Linux sistema,\n"
-"naravno samo u komandnoj liniji.\n"
-"\n"
-" * Instalira osnovni sistem plus osnovne alate\n"
-"\n"
-" * Instalira nekoliko paketa radi grafi�kog desktopa\n"
-"\n"
-"Mo�ete selektovati i Pojedina�no biranje paketa \"Individual package "
-"selection\", koje je korisno ukoliko\n"
-"su vam poznati ponu�eni paketi i �elite da imate potpunu \n"
-"kontrolu nad svim �to �e biti instalirano.\n"
-"\n"
-"Ukoliko ste pokrenuli a�uriranje ili \"Upgrade\" mod, mo�ete deselektovati "
-"sve\n"
-"grupe da bi izbegli instalaciju bilo kog novog paketa. Ovo je korisno za "
-"popravljanje ili\n"
-"a�uriranje postoje�eg sistema."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Na kraju, u zavisnosti od va�eg izbora da da birate pojedina�ne pakete\n"
-"ili ne, bi�e vam prikazano stablo sa svim paketima klasifikovanim\n"
-"po grupama i podgrupama. Dok pretra�ujete stablo, mo�ete selektovati cele\n"
-"grupe, podgrupe, ili individualne pakete.\n"
-"\n"
-"Kada kod selektujete paket na stablu, opis se pojavljuje sa desne\n"
-"strane. Kada je va�a selekcija zavr�ena, kliknite na Instalacija \"Install\" "
-"taster koji\n"
-"�e pokreuti instalacioni proces. U zavisnosti brzine va�eg\n"
-"hardvera i broja paketa koje treba da se instaliraju, instalacija mo�e\n"
-"i potrajati. Procenjeno vreme do zavr�etka instalacije je prikazano\n"
-"na ekranu da bi vam pomoglo da vi�ak vremena iskoristite da popijete �olju "
-"�aja ili\n"
-"kafe.\n"
-"\n"
-"!! Ukoliko je server paket izabran slu�ajno ili kao deo\n"
-"cele grupe, bi�ete upitani da li zaista �elite da instalirate\n"
-"ponu�ene servere. Pod Mandrake Linux-om, svi instalirani\n"
-"serveri se startuju po default-u za vreme podizanja sistema. �ak i ako su "
-"sigurni i nemaju\n"
-"poznatih bezbednosnih propusta do vremena izlaska distribucije, mo�e se "
-"desiti\n"
-"da sigurnosne rupe budu otkivene kasnije.\n"
-" Ukoliko ne znate koji pojedina�ni servis �ta treba da radi\n"
-"ili za�to se instalira, onda kliknite \"Ne\". Klikom na \"Da\" �ete\n"
-"instalirati prikazane servis i oni �e biti pokrenuti automatski po\n"
-"default-u. !!\n"
-"\n"
-"Opcija Automatske zavisnosti ili \"Automatic dependencies\" jednostavno "
-"isklju�uje dijalog sa upozorenjem\n"
-"koji se javlja svaki put kada instaer automatski selektuje pakete. Ovo se\n"
-"javlja zato �to on odre�uje da mora da zadovolji zavisnosti sa drugim\n"
-"paketom da bi uspe�no zavr�io instalaciju.\n"
-"\n"
-"Mala ikonica flopi diska na dnu liste vam omogu�ava da u�itate\n"
-"listu paketa birane tokom prethodne instalacije. Klikom na ovu ikonicu\n"
-"�e od vas biti tra�eno da ubacite disketu kreiranu ranije na kraju \n"
-"prethodne instalacije. Pogledajte poslednji pasus (korak) da bi nau�ili kako "
-"da kreirate \n"
-"takvu disketu."
-
-#: ../../help.pm_.c:164
-#, fuzzy
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Ukoliko �elite da pove�ete va� ra�unar na Internet ili na lokalnu mre�u,\n"
-"izaberite ispravne opcije. Uklju�ite va�e ure�aje pre izbora\n"
-"opcija da bi DrakX mogao da ih detektuje automatski.\n"
-"\n"
-"Mandrake Linux nudi pode�avanje Internet konekcije u\n"
-"toku instalacije. Mogu�e konekcije su: tradicionalni modem, ISDN\n"
-"modem, ADSL konekcija, kablovski modem, i na kraju jednostavna LAN "
-"konekcija\n"
-"(Ethernet).\n"
-"\n"
-"Ovde ne�emo detaljno opisivati svaku konfiguraciju. Jednostavno proverite da "
-"li imate\n"
-"sve parametre od va�eg Internet Provajdera ili sistemskog\n"
-"administratora.\n"
-"\n"
-"Mo�ete konsultovati i deo upustva o Internet konekcijama za detalje\n"
-"o konfiguraciji, ili jednostavno sa�ekajte da vam se sistem instalira i\n"
-"onda pokrenite program koji je tamo opisan za pode�avanje va�e konekcije.\n"
-"\n"
-"Ukoliko �elite da mre�u nakon isntalacije ili ste zavr�ili\n"
-"konfigurisanje mre�ne konekcije, kliknite na Poni�ti ili \"Cancel\"."
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Sada mo�ete odabrati koje servise �elite da se startaju pri podizanju "
-"sistema.\n"
-"\n"
-"Ovde su prikazani svi dostupni servisi na trenutnoj\n"
-"instalaciji. Pregledajte ih pa�ljivo i deselektujte one koji vam ne�e biti "
-"uvek\n"
-"potrebni pri podizanju sistema.\n"
-"\n"
-"Mo�ete dobiti i kratko obja�njenje o servisu selektovanjem\n"
-"odre�enog servisa. Me�utim, ukoliko niste sigurni koji od servisa jesu ili\n"
-"nisu korisni, sigurnije je ostaviti ih selektovanim.\n"
-"\n"
-"Na ovom nivou, budite veoma pa�ljivi ukoliko �elite da koristite  va�u "
-"ma�inu kao\n"
-"server: verovatno ne�ete �eleti da startujete nijedan servis koji vam ne�e\n"
-"trebati. Zapamtite da nekoliko servisa mo�e biti opasno ukoliko\n"
-"su omogu�eni na serveru. Generano govore�i, izaberite samo servise koje �ete "
-"svarno trebati."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (skra�enica za X Window Sistem) je srce GNU/Linux grafi�kog interfejsa\n"
-"na koji se sva grafi�ka okru�enja (KDE, Gnome, AfterStep,\n"
-"WindowMaker, etc.) oslanjaju. U ovom delu, DrakX\n"
-"�e poku�ati da automatski podesi X-ove.\n"
-"\n"
-"Zaista se retko de�ava da neuspe, osim ukoliko harver nije veoma star (ili\n"
-"veoma nov). Ukoliko uspe, on �e automatski pokrenuti X-ove sa najboljom\n"
-"mogu�om rezolucijom u zavisnosti od veli�ine monitora. Pojavi�e se prozor\n"
-"sa pitanjem da li ga vidite.\n"
-"\n"
-"Ukoliko izvodite \"Ekspert\" instalaciju, pokrenu�ete �arobnjaka za X\n"
-"konfiguraciju. Pogledajte odgovaraju�i deo uputsva za vi�e informacija\n"
-"o ovom �arobnjaku.\n"
-"\n"
-"Ukoliko vidite gorepomenutu poruku i odgovorite sa \"Da\", tada �e DrakX "
-"nastaviti sa\n"
-"slede�im korakom. Ukoliko ne mo�ete da vidite poruku, to jednostavno zna�i\n"
-"da je konfiguracija pogre�na i da �e se test sam zavr�iti nakon\n"
-"10 sekundi, osve�avaju�i ekran."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Kad po prvi put budete testirali X kofiguraciju, mo�da ne�ete biti ba� "
-"zadovoljni\n"
-"sa prikazom (ekran je porevi�e mali, pomeren ulevo ili udesno...). Sre�om,\n"
-"�ak i ako se X pokrene ispravno, DrakX �e vas upitati da li vam "
-"konfiguracija\n"
-"odgovara. Tako�e �e predlo�iti izmene u prikazu i dati listu\n"
-"mogu�ih modova tra�e�i od vas da izaberete jedan.\n"
-"\n"
-"Kao poslednje re�enje, ako jo� uvek ne mo�ete da pokrenete X-ove, izaberite "
-"\"Change\n"
-"graphics card\", izaberite \"Unlisted card\", i kada vas upita koji\n"
-"server �elite, izaberite \"FBDev\". Ovo je sigurnosna opcija koja radi\n"
-"sa bilo kojom modernijom grafi�kom karticom. Tada izaberite \"Test again\" "
-"da bi bili sigurni."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Na kraju, bi�ete upitani da li �elite grafi�ki interfejs\n"
-"pri startanju sistema. Ovo pitanje �e vam biti postavnjeno �ak i ako niste "
-"testirali\n"
-"konfiguraciju. Naravno, odgovori�ete \"Ne\" ukoliko va�a ma�ina predstalja\n"
-"server, ili ukoliko niste uspe�no podesili\n"
-"displejed."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CDROM ima ugra�en spasila�ki mod. MO�ete mu pristupiti\n"
-"podizaem sistema preko CDROM-a, pritisnite >>F1<< taster pri startanju i "
-"ukucajte >>rescue<< u\n"
-"promptu. Ukoliko ne mo�ete da butujete sa CDROM-a, trebali\n"
-"bi da se vratite  na ove korake u najmanje dve situacije:\n"
-"\n"
-" * kada instalirate starter, DrakX �e prepisati sadr�aj boot sektora (MBR)\n"
-"va�eg osnovnog diska (osim ukoliko ne koristite neki drugi starter) da bi "
-"mogli \n"
-"da pokrenete ili Windows ili GNU/Linux (pretpostavljaju�i da imate instliran "
-"Windows na\n"
-"va�em sistemu). Ukoliko treba da reinstalirate Windows,  Microsoft-ov "
-"instalacioni\n"
-"proces �e opet prepisati boot sektor, pa ona ne�ete biti u mogu�nosti\n"
-"da pokrene GNU/Linux!\n"
-"\n"
-" * ukoliko se problem javlja i ne mo�ete da pokrenete GNU/Linux sa hard "
-"diska,\n"
-"ovaj flopi disk �e onda biti jedini na�in za startanje GNU/Linux-a. On\n"
-"sadr�i dobar broj sistemskih alata za obnovu sistema, koji se\n"
-"sru�io usled nestanka el.energije, nesretne gre�ke u kucanju, pogre�ne\n"
-"lozinke, ili bilo kog drugog razloga.\n"
-"\n"
-"Kada kliknete na ovaj korak, tra�i�e se od vas da ubacite praznu disketu\n"
-"u ure�aj. Flopi disketa  mora biti prazna ili da sadr�i podatke koji vam "
-"nisu neophodni\n"
-"Nema potrebe da je formatirate jer �e DrakX sam ponovo upisati\n"
-"celu disketu."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"U ovom trenutku, morate da izaberete gde �ete instalirati\n"
-"Mandrake Linux operativni sistem na va� hard disk. Ukoliko je prazan ili\n"
-"postoje�i operativni sistem koristi sav postoje�i prostor na disku, treba da "
-"ga\n"
-"particionirate. U osnovi, particioniranje hard diska se sastoji logi�kog\n"
-"deljenja da bi obezbedili prostor za instalaciju va� novi Mandrake Linux "
-"sistem.\n"
-"\n"
-"Po�to se efekti procesa particioniranja obi�no nepovratni,\n"
-"particionirnje mo�e biti prili�no stresan za neiskusne korisnike.\n"
-"Ovaj �arobnjak pojednostavljuje ovaj proces. Pre po�etka, "
-"konsultujteupustvo\n"
-"i ne �urite.\n"
-"\n"
-"\n"
-"Morate da imate ili da kreirate najmanje dve particije. Jedna je za sam "
-"operativni sistem adruga\n"
-"je za virtuelnu memoriju (�esto se naziva i Swap).\n"
-"\n"
-"\n"
-"Ukoliko su particije ve� kreirane (od predhodne instalacije ilikreirane\n"
-"drugim alatom za particioniranje), morate izabrati na koje od njih "
-"�eteinstalirati \n"
-"Linux sistem.\n"
-"\n"
-"\n"
-"Ukoliko particije nisu definisane, marate da ih kreirate. \n"
-"Da bi to uradili, mo�ete da koristite gore postavljeni �arobnjak. U "
-"zavisnosti id konfiguracije\n"
-"hard diska, postoji nekoliko mogu�nosti:\n"
-"\n"
-"* Koristite postoje�e particije: �arobnjak je detektovao jednu ili vi�e "
-"postoje�ihLinux particija na va�em hard disku. Ukoliko\n"
-"  �elite da ih zadr�ite, izaberite ovu opciju.\n"
-"\n"
-"\n"
-"* Brisanje celog diska: ukoliko �elite da izbri�ete sve podatke i sve "
-"particije koji postoje na va�em hard disku i zamenite ih va�im\n"
-"  novim Mandrake Linux sistemom, mo�ete da izaberete ovu ociju. Budite "
-"pa�ljivisa ovom opcijom, jer ne�ete biti u mogu�nosti\n"
-"  da povratite staro stanje nakon potvrde.\n"
-"\n"
-"\n"
-"* Koristite slobodan prostor na Windows particiji: ukoliko je Microsoft "
-"Windowsinstaliran na hard disku i zauzima\n"
-"  sav prostor, morate da kreirate slobodan prostor za Linux. Da bi to "
-"uradili morate izbrisati\n"
-"  Microsoft Windows particiju i podatke (pogledaj \"Brisanje celog diska\" "
-"ili \"Ekspertni mod\" re�enja) ili da promenite veli�inu\n"
-"  Microsoft Windows particije. Taj postupak se mo�e izvesti bez "
-"gubljenjapodataka. Ovo re�enje se preporu�uje\n"
-"  ukoliko �elite da koristite Mandrake Linux i Microsoft Windows naistom "
-"kompjuteru.\n"
-"\n"
-"\n"
-"  Pre nego izaberete ovu opciju, morate znati da �e veli�inaMicrosoft\n"
-"  Windows particije biti manja nego �to je sada. To zna�i da�ete imati manje "
-"prostora pod\n"
-"  Microsoft Windows-om za podatke ili instalaciju novog softvera.\n"
-"\n"
-"\n"
-"* Ekspertni mod: ukoliko �elite da ru�no particionirate hard disk, mo�eteda "
-"izaberete ovu opciju. Budite pa�ljivi pre nego\n"
-"  izaberete ovu pociju. �er je ovo dobra ali i opasna stvar. Mo�etelako "
-"izgubiti sve podatke. Dakle,\n"
-"  nemojte birati ovu opciju ukoliko ne znate �ta radite."
-
-#: ../../help.pm_.c:347
-#, fuzzy
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"I stigli ste. Instalacija je sada zavr�ena i va� GNU/Linux sistem je \n"
-"spreman za upotrebu. Samo kliknite na U redu ili \"OK\" da bi restartovali "
-"sistem. Mo�ete pokrenuti\n"
-"GNU/Linux ili Windows, �ta god vi�e preferirate (ukoliko imate instalirana "
-"dva sistema), �im\n"
-"sse ra�unar ponovo pokrene.\n"
-"\n"
-"Taster Napredno \"Advanced\" (samo u Ekspert modu) prikazuje jo� dva tastera "
-"za:\n"
-"\n"
-" * \"kreiranje auto-instalacione diskete\": radi kreiranja instalacionog "
-"flopi diska\n"
-"koji �e automatski pokrenuti celu instalaciju bez pomo�i operatora\n"
-", sli�no ovoj instalaciji koju ste upravo izveli.\n"
-"\n"
-"   Mo�ete primetiti da su dve razli�ite opcije dostupne nakon pritiska na "
-"taster:\n"
-"\n"
-"    * \"sa ponavljanjem\". Ovo je delom automatizirana instalacija jer korak "
-"sa\n"
-"particioniranjem diska ostaje interaktivan (samo on).\n"
-"\n"
-"    * \"Automatizovano\". Potpuno automatizovana instalacija: hard disk se u "
-"potpunosti\n"
-"formatizuje, i svi podaci �e biti izgubljeni.\n"
-"\n"
-"   Ova opcija je veoma korisna ukoliko izvodite veliki broj sli�nih "
-"instalacija\n"
-"na ve�em broju ma�ina. Pogledajte sekciju o auto instalaciji na na�em web "
-"sajtu.\n"
-"\n"
-" * \"Sa�uvaj selekciju paketa\"(*) : snima selekciju paketa koji ste\n"
-"napravili u ovoj instalaciji. Tako, da kada budete izvodili drugu "
-"instalaciju, ubacite disketu\n"
-"i pokrenete pomo�ni ekran pritiskom na\n"
-"[F1] taster, i zahtevom za >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Morate da iamte  FAT-formatiranu disketu (da bi je formatirali pod GNU/"
-"Linux-om, ukucajte\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Svaka particija koja je novodefinisana mora biti\n"
-"formatirana za uptrebu (formatiranje zna�i kreiranje datote�nog(fajl) "
-"sistema).\n"
-"\n"
-"Sada mo�da �elite da reformatirate postoje�e particije da bi izbrisali\n"
-"podatke koje sadr�e. Ukoliko �elite to, izaberite particije \n"
-"koje �elite da formatizujete.\n"
-"\n"
-"\n"
-"Zapamtite da nije potrebno da reformatirate sve postoje�e particije.\n"
-"Morate da reformatirate particije koje sadr�e operativni sistem (kao �to su "
-"\"/\",\n"
-"\"/usr\" ili  \"/var\") ali ne morate da reformatirate particije koje sadr�e "
-"podatke\n"
-"koje �elite da zadr�ite (obi�no /home).\n"
-"\n"
-"\n"
-"Pazite pri biranju particija, posle formatiranja, sv podaci �e \n"
-"biti izbrisani i ne�ete ih mo�i povratiti.\n"
-"\n"
-"\n"
-"Kliknite na \"U redu\" kada budete spreni za formatiranje particija.\n"
-"\n"
-"\n"
-"Kliknite na  \"Poni�ti\" ukoliko �elite da izabereete druge particije za "
-"instalaciju novog\n"
-"Mandrake Linux operativnog sistema. Kliknite na \"Napredno\" ukoliko �elite "
-"da izaberete particije koje �e biti proverene\n"
-"od lo�ih blokova na disku."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Va� novi Mandrake Linux operativni sistem se trenutno instalira.\n"
-"Ova operacija bi trebala da potraje nekoliko minuta (u zavisnosti od "
-"veli�inepaketa koji se instaliraju i brzine va�eg kompjutera).\n"
-"\n"
-"Molim Vas za strpljenje.Hvala."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Pre nego �to nastavite pa�ljivo pro�itajte uslove licence. Ona\n"
-"pokriva celu Mandrake Linux distribuciju, i ukoliko se ne sla�ete\n"
-"sa svim uslovima koji se nalaze u njoj, kliknite na \"Odbijam\" taster koji "
-"�e odmah\n"
-"zaustaviti instalaciju. Da bi nastavili sa instalacijom, kliknite \n"
-"taster \"Prihvatam\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Na ovom mestu, vreme je da izaberete �eljeni nivo sigurnosti za va�u\n"
-"ma�inu. Kako pravilo nala�e, �to je ma�ina vi�e izlo�ena, i �to je vi�e\n"
-"podataka koji su uba�eni zna�ajniji, mora biti i ve�i nivo sigurnosti.\n"
-"Ipak, ve�i nivo sigurnosti ida na u�trb brzine i\n"
-"lako�e upotrebe. Pogledajte MSEC poglavlje u ``Upustvu'' da\n"
-"bi dobili vi�e informacija o zna�enju ovih nivoa.\n"
-"\n"
-"Ukoliko ne znate �ta da izaberete, ostanite na default opciji."
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Na ovoj ta�ki, morate izbrati koju particiju(e) �elite da koristite za\n"
-"instalaciju novog Mandrake Linux sistema. Ukoliko su particije\n"
-"ve� definisane (od predhodne instalacije ili od strane\n"
-"drugog alata za particije), mo�ete da koristite postoje�e particije. U "
-"drugim slu�ajevima,\n"
-"hard disk particije moraju biti definisane.\n"
-"\n"
-"Da bi kreirali particije, morate prvo izabrati hard disk. Mo�ete izabrati\n"
-"disk za particioniranje klikom na \"hda\" za prvi IDE disk, \"hdb\" ili \n"
-"za drugi ili \"sda\" za prvi SCSI disk itd.\n"
-"\n"
-"Za particioniranje selektovanog hard diska, mo�ete koristiti slede�e "
-"opcije:\n"
-"\n"
-"   * \"O�isti sve\": ova opcija bri�e sve particije na izabranom hard "
-"disku.\n"
-"\n"
-"   * \"Auto alociranje\": ova opcija dozvoljava da automatski kreirate  Ext2 "
-"i swap particije na slobodnom prostoru \n"
-"     hard diska.\n"
-"\n"
-"   * \"Spasi tabelu particija\": ukoliko je va�a tabela particija o�te�ena, "
-"mo�ete da probate da je oporavite koriste�i ovu opciju. Budite\n"
-"     pa�ljivi i znajte da mo�e da i ne uspe.\n"
-"\n"
-"   * \"Vrati na staro\": ova opcija �e poni�titi izmenu.\n"
-"\n"
-"   * \"Ponovno u�itavanje\": ovu opciju mo�ete koristiti ukoliko �elite da "
-"poni�titisve promene i u�itate inicijalnu tabelu particija\n"
-"\n"
-"   * \"�arobnjak\": ukoliko �elite da koristite �arobnjaka za "
-"particioniranje hard diska, izaberite ovu opciju. Preporu�ena je ukoiko\n"
-"     nemate mnogo znanja o partcijama.\n"
-"\n"
-"   * \"Povrati sa diskete\": ukoliko ste snimili tabelu particija na "
-"disketu  tokom prethodne instalacije, mo�ete je\n"
-"     vratiti sa ovom opcijom.\n"
-"\n"
-"   * \"Snimi na disketu\": ukoliko �elite da da snimite tabelu particija na "
-"disketu da bi mogli kasnije da je povratite, mo�ete da iskoristite\n"
-"     ovu opciju. Naro�ito preporu�ujemo ovu opciju\n"
-"\n"
-"   * \"Ura�eno\": kada zavr�ite sa particioniranjem hard diska, iskoristite "
-"ovu opciju da bi snimili promene.\n"
-"\n"
-"Za vi�e informacija, mo�ete za svaku ocpiju  dobiti kretanjem pomo�u "
-"tastature: navigacijom kroz particije pomo�u [Tab] tastera i [Up/Down] "
-"strelica.\n"
-"\n"
-"Kada je particija izabrana, mo�ete koristiti:\n"
-"\n"
-" * Ctrl-c za kreiranje nove particije (kada je izabrana prazna particija);\n"
-"\n"
-" * Ctrl-d za brisanje particije;\n"
-"\n"
-" * Ctrl-m za postavljanje ta�ke montiranja.\n"
-"\n"
-"Ukoliko radite instalaciju na PPC Ma�inu, mo�da �ete �eleti da kreirate "
-"malu\n"
-"HFS 'bootstrap' particiju od najmanje 1MB za upotrebu\n"
-"yaboot startera. Ukoliko se dvoumite da ovu particiju napravite malo ve�om,\n"
-"na primer 50MB, mo�ete iskoristiti taj prostor za sme�tanje\n"
-"rezervnog kernela i ramdisk image za startanje u hitnim situacijama."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Jedna ili vi�e Microsoft Windows particija je detektovano \n"
-"na hard disku. Izaberite koju od njih �elite da smanjite da bi instalirali\n"
-"novi Mandrake Linux operativni sistem.\n"
-"\n"
-"Svaka particija je ispisana na slede�i na�in: \"Ime Linux-a\",\"Ime Windows-a"
-"\"\n"
-"\"Kapacitet\".\n"
-"\n"
-"\"Ime Linux-a\" je kodirano na slede�i na�in: \"tip hard diska\", \"broj "
-"hard diska\",\n"
-"\"broj particije\" (na primer, \"hda1\").\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk ID ure�aj i \"sd\"\n"
-"ukoliko je SCSI hard disk.\n"
-"\n"
-"\"Broj hard diska\" je uvek slovo posle \"hd\" ili \"sd\". Sa IDE hard "
-"diskovima:\n"
-"\n"
-" * \"a\" zna�i  \"master hard disk na primarnom  IDE kontroleru\",\n"
-"\n"
-" * \"b\" zna�i \"slave hard disk na primarnom IDE kontroloeru\",\n"
-"\n"
-" * \"c\" zna�i \"master hard disk na sekundranom IDE kontroloeru\",\n"
-"\n"
-" * \"d\" zna�i \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"Sa SCSI hard diskovima, \"a\" zna�i \"primarni hard disk\", a \"b\" zna�i "
-"\"sekundarni hard disk \", itd.\n"
-"\n"
-"\"Ime Windows-a\" je slovo hard diska pod Windows-om (prvi disk\n"
-"ili particija se zove \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Budite strpljivi.Trajanje ovih oeracija mo�e biti nekoliko minuta"
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX sada treba da zna da li �elite da pokrenete default (\"Preporu�eno\")\n"
-"instalaciju ili �elite da imate ve�u kontrolu (\"Ekspert\"). Tako�e\n"
-"iamte i pravo izbora pokretanja nove instalacije ili a�uriranja postoje�eg\n"
-"Mandrake Linux sistema:\n"
-"\n"
-" * kompeltno uklanja stari sistem\n"
-"\n"
-" *\n"
-"\n"
-" *\n"
-"\n"
-"Sa druge strane, \"A�uriranje\" vam dozovoljava nadogradnju postoje�eg "
-"sistema.\n"
-"Kona�no, izaberite \"A�uriranje paketa\" ukoliko �elite da a�urirate\n"
-"pakete sa prethodne instalacije, bez drugih izmena.\n"
-"\n"
-"Izaberite  \"Instalacija\" ukoliko nema prethodne verzijeMandrake Linux\n"
-"koja je instalirana ili ho�ete da koristite vi�e operativnih sistema.\n"
-"\n"
-"Izaberite \"A�uriranje\" ukoliko �elite da a�urirate postoje�u verziju "
-"Mandrake Linux-a.\n"
-"\n"
-"U zavisnosti od va�eg poznavanja GNU/Linux-a, mo�ete izabrati jednu od "
-"slede�ih nivoa za instalaciju ili a�uriranje\n"
-"Mandrake Linux operativnog sistema:\n"
-"\n"
-"* Preporu�eno: ukoliko niakada niste instalirali  GNU/Linux operativni "
-"sistem izaberite ovo. Instalacija �e biti\n"
-"  veoma laka i ima�ete da odgovorite na svega nekoliko pitanja.\n"
-"\n"
-"* Ekspert: ukoliko iamte dobro znanje o GNU/Linux-u, mo�ete izabrati ovu "
-"instalacionu klasu. Kao i \"Sa pode�avanjem\"\n"
-"instalacionoj klasi, mo�i �ete da birate primarnu namenu (radna stanica, "
-"server, razvojna stanica). Budite veoma\n"
-"pa�ljivi pre izbora ove instalacione klase. Mo�i �ete da izvodite veoma\n"
-"podesivu instalaciju.\n"
-"Odgovori na neka pitanja mogu biti veoma te�ki ukoliko nemate dobro znanje "
-"o\n"
-"GNU/Linux-u. Dakle, nemojte birati \n"
-"ovu instalacionu kasu ukoliko ne znate �ta radite."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"U principu, DrakX bira desnu tastaturu za vas (u zavisnosti od toga koji\n"
-"ste jezik izabrali) i �ak i ne�ete videti ovaj korak. Ipak, mo�e\n"
-"se desiti da niste dobili tastaturu koja odgovara va�em jeziku: na\n"
-"primer, ukoliko ste �vajcarac koji govori engleski, verovatno �ete �eleti\n"
-"�vajcarsku tastaturu. Ili ukoliko govorite Engleski ali se nalazite\n"
-"u Kvebeku, mo�ete se na�i u istoj situaciji. U oba\n"
-"slu�aja, mora�ete da se vratite na ovaj instalacioni korak i izaberete\n"
-"odgovaraju�u tastaturu sa liste.\n"
-"\n"
-"Kliknite na taster \"Jo�\" da bi dobili kompletnu listu\n"
-"podr�anih tastatura."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Izaberite va� jezik za instalaciju i kori��enje sistema.\n"
-"\n"
-"Klikom na taster \"Napredno\" omogu�i�ete sebi da vidite druge\n"
-"jezike koje mo�ete instalirati na va�u radnu stranicu. Biranjem drugih "
-"jezika\n"
-"�ete instalirati fajlove vezane (za specificirane jezike) za dokumentaciju "
-"i\n"
-"aplikacije. Na primer, ukoliko �e na va�em ra�unaru hostovati korisnici iz "
-"�panije\n"
-"izaberite Engleski kao glavni a na stablu\n"
-"ozna�ite i \"�paniski|�panija\".\n"
-"\n"
-"Zapamtite da mo�ete instalirati vi�e jezika. Kada izaberete sve �eljene\n"
-"dodatne lokalizacije kliknite na taster \"U redu\" da bi nastavili."
-
-#: ../../help.pm_.c:609
-#, fuzzy
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Po default-u, DrakX pretpostavlja da imate mi�a sa dva tastera i podesi�e\n"
-"emulaciju tre�eg tastera. DrakX �e automatski prepoznati da li se radi o\n"
-"PS/2, serijski ili USB mi�u.\n"
-"\n"
-"Ukoliko �elite da specificirate drugi tip mi�a odaberite odgovaraju�i\n"
-"tip sa liste.\n"
-"\n"
-"Ukoliko izberete mi�a koji se razlikuje od default-a pojavi�e vam se\n"
-"test ekran. Koristite tastere i to�ki�e da bi proverili da li su postavke\n"
-"dobre. Ukoliko mi� ne radi ispravno pritisnite  taster za raznmak (space "
-"bar) ili\n"
-"taster RETURN za \"Poni�ti\" i izaberite ponovo."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Molim, izaberite odgovaraju�i port. Na primer, COM1 port pod MS Windows-om\n"
-" u Linux-u ima oznaku ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Ovo je najzana�ajnija ta�ka u odlu�ivanju o sigurnosti va�eg GNU/Linux\n"
-"sistema: morate da unesete \"root\" lozinku. \"root\" je administrator\n"
-"sistema i jedini je ovla�ten da vr�i izmene, dodaje korisnike,\n"
-"menja osnovnu konfiguraciju sistema, itd. Ukratko, \"root\" mo�e\n"
-"da uradi sve! Zbog toga morate da izaberete lozinku koja te�ko mo�e da se\n"
-"pogodi - DrakX �e vam re�i ukoliko je ona suvi�e jednostavna. Kao �to mo�ete "
-"da vidite, mo�ete da\n"
-"izaberete i da ne unesete lozinku, ali vam ozbiljno preporu�ujemo da to\n"
-"neradite iz jednog razloga: nemojte da mislite da to �to ste startovali GNU/"
-"Linux da\n"
-"va�i drugi operativni sistemi sigurni od gre�aka. Kako \"root\" mo�e da\n"
-"presko�i sva ograni�enja i nenamerno izbri�e sve podatke na particiji\n"
-"neopreznim pristupom, va�no je da je te�ko\n"
-"postati \"root\".\n"
-"\n"
-"Lozinka treba da bude me�avina brojeva i slova i treba da sadr�i najmanje 8\n"
-"karaktera. Nikada ne zapisujte na papir \"root\" lozinku - tako lako\n"
-"mo�ete ugroziti sistem.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-
-#: ../../help.pm_.c:663
-#, fuzzy
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO i GRUB su starteri (boot loaders) za GNU/Linux. Ovaj korak je , "
-"naravno,\n"
-"potpuno automatizovan. U stvari, DrakX analizira boot sektor hard diska\n"
-"i reaguje na osnovu onog �to je prona�ao:\n"
-"\n"
-" * ukoliko je prona�en Windows boot sektor, on �e ga zameniti sa GRUB/LILO "
-"boot\n"
-"sektorom. Sre�om, mo�i �ete da startujete ili GNU/Linux ili neki drugi OS;\n"
-"\n"
-" * ukoliko je prona�en GRUB ili LILO boot sektor, on �e ga zameniti sa "
-"novim;\n"
-"\n"
-"Ukoliko je u dilemi, DrakX �e prikazadi dijalog sa razli�itim opcijama.\n"
-"\n"
-" * \"Ponu�eni starteri\": iamte tri opcije:\n"
-"\n"
-"    * \"LILO sa grafi�kim menijem\": ukoliko vi�e volite LILO sa grafi�kim\n"
-"interfejsom.\n"
-"\n"
-"    * \"GRUB\": ukoliko vi�e volite GRUB (tekstualni mod).\n"
-"\n"
-"    * \"LILO sa tekstualnim menijem\": ukoliko vi�e volite LILO sa "
-"tekstualnim interfejsom.\n"
-"\n"
-" * \"Boot ure�aj\": u ve�ini slu�ajeva, ne�ete menjati default\n"
-"(\"/dev/hda\"), ali ukoliko �elite, mo�ete starter da instalirate na\n"
-"drugi hard disk (\"/dev/hdb\"), ili �ak na disketu (\"/dev/fd0\").\n"
-"\n"
-" * \"Vreme do po�etka startanja default sistema\": kada startujete ra�unar,\n"
-"ova pauza vam omogu�ava da izaberete - u starterovom meniju,\n"
-"drugi sistem (recimo Njinjdovs).\n"
-"\n"
-"!! Budite pa�ljivi, jer ako izaberete da ne instalirate starterr (klikom na\n"
-"\"Poni�ti\"), morate osigurati drugi na�in da startujete Mandrake\n"
-"Linux sistem! Budite sigurni da znate �t aradite pre nego izmenite\n"
-"i jednu opciju. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) i Grub su starteri: oni omogu�avaju da startate \n"
-"ili Linux ili bilo koji drugi operativni sistem prisutan na va�em ra�unaru.\n"
-"Naravno, ovi drugi operativni sistemi su ispravno detektovani i "
-"instalirani.\n"
-"Ukoliko to nije tako,mo�ete to sami urediti ovde.Pazite kada unosite\n"
-"parametre\n"
-"\n"
-"Tako�e,mo�ete �eleti da ostalim operat.sistemima onemogu�ite da pristupe "
-"drugi\n"
-"U tom slu�aju, treba da izbri�ete odgovaraju�e linije za te sisteme. Ali\n"
-"onda morate imati boot disketu da bi ih vi mogli pokrenuti!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Morate ozna�iti gde �elite da postavite podatke potrebne za podizanje GNU/"
-"Linux-a.\n"
-"\n"
-"Ukoliko neznate ta�no �ta radite,izaberite \"Prvi sektor\n"
-"diska (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control "
-"Centernand clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX sada treba da detektuje IDE ure�aje prisutne u ve�em ra�unaru.DrakX �e "
-"potra�iti PCI SCSI adapter(e).\n"
-"Ukoliko DrakX prona�e SCSI adapter(e) i bude znao koji upravlja�ki program \n"
-"(drajver) koristion �e ga(ih) automatski instalirati.\n"
-"\n"
-"Po�to se mo�e desiti da pri detekciji neka komponenta ne bude detektovana "
-"DrakX �e vas upitati da li imate PCI SCSI adapter. Kliknite \"Da\" \n"
-"ukoliko znate da imate SCSI adapter na svojoj ma�ini. Na prikazanoj listi "
-"mo�i �ete da izaberete odgovoaraju�i.\n"
-"Kliknite \"Ne\" ukoliko nemate SCSI adaptera u  ma�ini. Ukoliko niste "
-"sigurni\n"
-"proverite na listi detektovanog hardvera selektovanjem \"Pogledaj info o "
-"hardveru\"i klikom na \"U redu\". Pregledajte\n"
-"listu a onda kiknite na \"U redu\" da bi se vratili na pitanje o SCSI "
-"ure�ajima.\n"
-"\n"
-"Ukoliko morate ru�no da specificirate va� adapter, DrakX �e\n"
-"vas upitati da odredite opcije za njega.Treba li bi da dozvolite DrakX-u da\n"
-"ispita adapter radi tih opcija. Ovo obi�no i uspe.\n"
-"\n"
-"Ukoliko DrakX nije u stanju da ispita opcije koje su potrebne, mora�ete da "
-"sami odredite opcije za drajver.\n"
-"Pogledajte i Instalacioni vodi� (3 poglavlje, sekcija \"Prikupljanje "
-"informacija o va�em hardveru\")\n"
-"da bi saznali kako da pribavite informacije o parametrima potrebnim za "
-"hardver,sa svoje Windows instalacije (ukoliko je imate na sistemu),\n"
-"dokumenatciju o hardveru, ili sa proizvo�a�evog \n"
-"veb sajta (ukoliko imate pristup internetu)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Mo�ete dodati i dodatne unose za yabbot, ili za druge operativne ssisteme,\n"
-"alternativne kernele, ili za emergency boot image.\n"
-"\n"
-"Za druge OS-ove - unos sadr�i samo oznaku i root particiju.\n"
-"\n"
-"Za Linux, postoji nekoliko mogu�nosti: \n"
-"\n"
-" * Oznaka: Ovo je jednostavno ime koje �ete ukucati pri yaboot promptu da bi "
-"izabrali ovu \n"
-"startnu opciju.\n"
-"\n"
-" * Image: Ovo je ime kernela koji se startuje.  Obi�no vmlinux ili \n"
-"varijacija vmlinux sa ekstenzijom.\n"
-"\n"
-" * Root: \"root\" ure�aj ili \"/\" za va�u Linux instalaciju.\n"
-"\n"
-"  \n"
-" * Dodatak: Na Apple hardveru, kernelova opcija se koristi za prili�no �esto "
-"da\n"
-"asistira inicijalizaciju video hardvera, ili da omogu�i emulaciju tastera za "
-"mi� na tastaturi zbog \n"
-"�estog nedostatka drugog i tre�eg tastera na Apple mi�evima.  Sledi par \n"
-"primera:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: Ova opcija se mo�e koristiti ili za podizanje inicijalnih modula, "
-"pre nego je boot \n"
-"ure�aj dostupan, ili za podizanje ramdisk image za startanje u hitnim "
-"situacijama.\n"
-"\n"
-" * Initrd-veli�ina: veli�ina default ramdisk je generalno 4096 bajta.  "
-"Ukoliko vam treba\n"
-"alociranje velikog ramdisk-a, ova opcija mo�e biti korisna.\n"
-"\n"
-"  - Read-write: Normalno se 'root' particija inicijalno postavlja kao read-"
-"only, da bi omogu�ila\n"
-"proveru datote�nog sistema pre nego sistem postane \"aktivan\".  Ovde mo�ete "
-"poni�titi ovu opciju.\n"
-"\n"
-" * NoVideo: Ukoliko se Apple video hardver poka�e veoma problemati�nim, "
-"mo�ete\n"
-"izabrati ovu opciju da bi startali sistem u 'novideo' modu, sa osnovnom "
-"framebuffer podr�kom.\n"
-"\n"
-" * Default: Kako je ovo default Linux selekcija, dovoljno je da samo\n"
-"pritisnete ENTER pri yaboot promptu.  Ovaj unos �e tako�e biti dodatno "
-"ozna�en sa \"*\", ukoliko\n"
-"pritisnete TAB da bi videli startnu selekciju."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot je starter NewWorld MacIntosh hardver. On mo�e da pokrene\n"
-"GNU/Linux, MacOS, ili MacOSX, ukoliko su prisutni na va�oj ma�ini.\n"
-"Normalno, ovi drugi operativni sistemi se smatraju korektno detektovani i \n"
-"instalirani. Ukoliko to nije slu�aj, mo�ete ru�no dodati unos na ovom\n"
-"ekranu. Budite pa�ljivi pri izboru parametara.\n"
-"\n"
-"Osnovne opcije Yaboot-a su:\n"
-"\n"
-"  - Inicijalna poruka: Jednostavna tekstualna poruka koja se prikazuje pre "
-"statrtnog\n"
-"prompta.\n"
-"\n"
-" * Boot ure�aj: Ukazuje gde �elite da smestite informaciju potrebnu za \n"
-"startanje GNU/Linux-a. Generalno gledano, mora�ete da podesite bootstrap "
-"particiju pre \n"
-"nego podesite ovu informaciju.\n"
-"\n"
-" * Omogu�i Firmware pauzu: Za razliku od LILO-a, postoje dve vrste pauze \n"
-"yaboot-a.  Prva pauza se meri u sekundama i u tom vremenu mo�ete \n"
-"birati izme�u CD-a, OF starta, MacOS, ili Linux-a.\n"
-"\n"
-" * Pauza pri startanju kernela: Ova pauza je sli�na pauzi kod LILO "
-"startera.  Nakon \n"
-"izbora Linux-a, ima�ete pauzu od 0.1 sekunde pre nego �to se selektuje\n"
-"default opis kernela.\n"
-"\n"
-" * Omogu�i startanje CD-a ?: Ukoliko ozna�ite ovu opciju mo�i �ete da "
-"izaberete \"C\" za CD pri\n"
-"prvom startnom promptu.\n"
-"\n"
-" * Omogu�i OF startanje?: Ukoliko ozna�ite ovu opciju mo�i �ete da izaberete "
-"\"N\" za Open\n"
-"Firmware pri prvom startnom promptu.\n"
-"\n"
-" * Default OS: Mo�ete da izaberete koji operativni sistem �e biti pokretan "
-"kao default kada Open Firmware \n"
-"pauza zavr�i."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Ovde su prikazani razli�iti parametri vezani za va�u ma�inu. U zavisnosti\n"
-"od va�eg instaliranog hardvera, mo�etey - ili ne morate, pogledajte slede�e "
-"unose:\n"
-"\n"
-" * \"Mi�\": proverite trenutne postavke za mi�a i kliknite na taster\n"
-"da bih promenili ukoliko je neophodno.\n"
-"\n"
-" * \"Tastatura\": proverite trenutni rasored tastature tion i kliknite na\n"
-"taster da bi napravili izmene ukoliko su potrebne.\n"
-"\n"
-" * \"Vremenska zona\": DrakX, po default-u, poga�a va�u vremensku zonu u "
-"zavisnosti koji se jezik\n"
-"odabrali. Ali opet, mo�da ste izabrali tastaturu koja se razlikuje\n"
-"od tastature zemlje koju ste naveli.\n"
-"Mora�ete da kliknete na taster \"Vremenska zona\" da bi\n"
-"podesili �asovnik u skladu sa vremenskom zonom u kojoj se nalazite.\n"
-"\n"
-" * \"�tampa�\": kilkom na taster \"�tampa�\" pokrenu�ete �arobnjaka za\n"
-"konfigurisanje �tampa�a.\n"
-"\n"
-" * \"Zvu�na kartica\": ukoliko je zvu�na kartica detektovana, onda je\n"
-"ovde prikazana. Nisu mogu�e promene u toku instalacije.\n"
-"\n"
-" * \"TV kartica\": ukoliko je TV kartica detektovana, onda je\n"
-"prikazana ovde. Nisu mogu�e promene u toku instalacije.\n"
-"\n"
-" * \"ISDN kartica\": ukoliko je ISDN kartica detektovana, onda je\n"
-"prikazana ovde. Mo�ete kliknuti na tester da bi promenili parametre\n"
-"koji su vezani za nju."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Izaberite hard disk koji �elite da izbri�ete da bi instalirali novu Mandrake "
-"Linux \n"
-"particiju. Budite pa�ljivi, svi podaci na njemu �e biti izgubljeni\n"
-"i ne�e se mo�i povratiti!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Kliknite na \"U redu\" ukoliko �elite da izbri�ete sve podatke i \n"
-"particije na ovom hard disku.Budite pa�ljivi, posle klika na \"U redu\", vi\n"
-"ne�ete mo�i da povratite bilo koji podatak ili particiju na hard disku,\n"
-"pa i bilo koje Windows podatke.\n"
-"\n"
-"Kliknite na \"Poni�ti\" da bi poni�ti ovu operaciju bez gubljenja podataka "
-"i\n"
-"particija koje su prisutne na ovom hard disku."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Morate i %s da formatirate"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Vi ste izabrali slede�e servere: %s\n"
-"\n"
-"\n"
-"Ovi serveri se aktiviraju po osnovnoj postavci. Oni nemaju poznatih "
-"sigurnosnih\n"
-"nedostataka, ali se ipak mogu pojaviti neki novi. Ukoliko se to desi, morate "
-"ih a�urirati\n"
-"�to je pre mogu�e.\n"
-"\n"
-"\n"
-"Da li zaista �elite da instalirate ove servise?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nije mogu� prenos bez NIS domena"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ubacite FAT formatiranu praznu disketu u ure�aj %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ova disketa nije formatirana sa FAT sistemom"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Da bi koristili ovaj izbor za �uvanje selekcije paketa, izaberite "
-"instalaciju sa ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Gre�ka kod otvaranja datoteka %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Neke hardverske komponente u va�em ra�unaru zahtevaju odgovaraju�e drajvere "
-"da bi normalno funkcionisale.\n"
-"Informacije o njima mo�ete prona�i na: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Morate imati  root particiju.\n"
-"Za ovo, kreirajte particiju (ili kliknite na postoje�u).\n"
-"Zatim izaberite \"Ta�ka montiranja\" i podesite na `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Morate imati swap particiju"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Hm, nema swap particije\n"
-"\n"
-"Svejedno nastaviti dalje ?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Morate imati FAT particiju montiranu u /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Koristi slobodan prostor"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nema dovoljno slobodnog prostora za alociranje novih particija"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Koristi postoje�u particiju"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nema ni jedne pariticije za rad"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Koristi Windows particiju za loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Koju particiju �elite da korisite za Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Izaberite veli�inu"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Veli�ina Root particije u MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Veli�ina Swap particije u MB:"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Korisiti slobodan prostor na Windows particiji"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kojoj particiji  �elite da promenite veli�inu?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Prora�unavam granice Windows fajl-sistema"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Program za promenu veli�ine FAT paritcija ne mo�e da upravlja va�om "
-"particijom, \n"
-"zbog slede�e gre�ke: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Va�a Windows particija je previ�e fragmentirana, prvo pokrenite ``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"UPOZORENJE!\n"
-"\n"
-"DrakX treba da izmeni veli�inu Windows particije. Budite pa�ljivi: ova\n"
-"operacija je opasna. Ukoliko to do sada niste radili, prvo treba da iza�ete\n"
-"iz instalacije,pokrenete pod Windows-om\n"
-"scandisk (eventualno i defrag), a onda ponovo pokrenite instalaciju.\n"
-"Ako ste sigurni, pritisnite OK (U redu)."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Koju veli�inu �elite da zadr�ite za prozore"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "particija %s "
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT izmena veli�ine neuspela: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ne postoje FAT particije kojima se mo�e promeniti veli�ina ili koje se mogu "
-"korisititi za loopback (ili nema dovoljno slobodnog prostora)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Izbri�i celi disk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Ukloni Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Imate vi�e od jednog hard diska, na koji od njih �elite da instalirate "
-"Linux ?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "SVE postoje�e particije i podaci na disku %s �e biti izgubljeni"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Custom disk particioniranje"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Koristi fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sada mo�ete particionirati va� %s hard disk ure�aj\n"
-"Kada zavr�ite,ne zaboravite da potvrdite koriste�i `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemate dovoljno slobodnog prostora na Windows particiji"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ne mogu da prona�em slobodan prostor za instaliranje"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX �arobnjak za particioniranje je prona�ao slede�a re�enja:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Particioniranje nije uspelo : %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Pristupam  mre�u"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Odstupam od mre�e"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Gre�ka, ali neznam kako da je razre�im.\n"
-"Nastavite na va� rizik!"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplirana ta�ka montiranja %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Neki va�ni paketi nisu dobro instalirani.\n"
-"Va� cdrom ure�aj ili cd su neispravni.\n"
-"Proverite cdrom na instaliranom kompjuteru koriste�e \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Dobro�li u  %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nepristupa�an disketni ure�aj"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Pokre�em korak `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Va� sistem ima manjak snage. Usled toga mo�ete imati problema pri "
-"instalaciji\n"
-"Mandrake Linux. Ukoliko se oni pojave, mo�ete probati tekstualnu "
-"instalaciju. Da bi to postigli,\n"
-"pritisnite `F1' pri startanju sa CDROM-a, a onda ukucajte  `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Instalacione klase"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Molim vas da izaberete jednu od slede�ih instalacionih klasa:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ukupna veli�ina grupa koje ste izabrali iznosi  %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ukoliko �elite da instalirate manje,\n"
-"izaberite procentualno broj paketa koje �elite da instalirate.\n"
-"\n"
-"Pri malom procentu �e se instalirati samo va�ni paketi;\n"
-"dok �e pri procentu od 100%% biti instalirani svi paketi."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Na va�em disku ima mesta samo za %d%% ovih paketa.\n"
-"\n"
-"Ukoliko �elite da instalirate manje od ovoga,\n"
-"izaberite procentualno broj paketa koje �elite da instalirate.\n"
-"Pri malom procentu �e se instalirati samo va�ni paketi;\n"
-"dok �e pri procentu od  %d%% biti instalirano maksimalno mogu� broj paketa"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Mo�i �ete da ih preciznije birate u slede�em koraku."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procenat paketa za instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Odabir grupa paketa"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Pojedina�no biranje paketa"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukupna veli�ina: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Lo� paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ime: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verzija: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Veli�ina: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Va�no: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Ne mo�ete selektovati ovaj paket jer nema vi�e slobodnog prostora"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Slede�i paketi treba da budu instalirani"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Slede�i paketi �e biti izbrisani"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Ne mo�ete selektovati/deselektovati ovaj paket"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ovo je obavezni paket,i ne mo�e biti deselektovan"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Mo�ete deselektovati ovaj paket jer je ve� instaliran"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ovaj paket mora biti a�uriran\n"
-"Da li sigurno �elite da ga deselektujete ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ne mo�ete deselektovati ovaj paket.On mora biti a�uriran"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Automatski prika�i izabrane pakete"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instaliraj"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "U�itaj/Snimi na disketu"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "A�uriranje selekcije paketa"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimalno instaliraj"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Izaberi pakete za instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instaliram"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Procenjujem"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Preostalo vreme"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Samo momenat, pripremam instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paketa"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaliram paket %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Prihvati"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Odbaci"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Promenite va� Cd-Rom!\n"
-"\n"
-"Ubacite va� CD ozna�en sa \"%s\" u pogon i pritisnite \"U redu\" kada ste "
-"spremni.\n"
-"Ukoliko ga nemate pritisnite  Poni�ti."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Svejedno nastaviti dalje ?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Gre�ka u listi paketa:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Gre�ka pri instalaciji paketa:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Upozorenje !\n"
-"\n"
-"Pa�ljivo pro�itajte dole navedene uslove. Ukoliko se ne sla�ete sa bilo "
-"kojim \n"
-"delom, onda nemate odobrenje za instaliranje slede�eg CD-a. Pritisnite "
-"'Odbijam' \n"
-"da bi nastavili instalaciju bez upotrebe tih CD medija.\n"
-"\n"
-"\n"
-"Neke komponente sadr�ane u slede�im CD medijama nisu pod\n"
-"GPL Licencom ili sli�nim ugovorima. Svaka takva komponenta je onda "
-"uslovljena\n"
-"uslovima i ugovorima sopstevene lincence. \n"
-"Pa�ljivo pro�itajte i upoznajte se sa takvim specifi�nim licencama pre \n"
-"nego uotrebite ili redistribuirate pomenute komponente. \n"
-"Takve licence �e u glavnom zabranjivati transfer, kopiranje \n"
-"(osim za svrhu backup-a podataka), redisribuciju, nahnadnu promenu, \n"
-"rastavljanje, de-kompajliranje ili menjanje komponenti. \n"
-"Bilo koji deo ugovora koji nije ispo�tovan istovremeno uklanja i ostala va�a "
-"prava\n"
-"u datoj licenci. Ukoliko vam odre�ena licenca ne garantuje takva\n"
-"prava, obi�no ne mo�ete instalirati programe na vi�e od jedanog\n"
-"aiatema, ili ih prilagoditi da se mogu koristiti na mre�i. Ukoliko ste u "
-"dilemi, molimo vas da direktno \n"
-"kontaktirate distributera ili editora komponente. \n"
-"Prenos na tre�e programe ili kopiranje takvih komponenti uklju�uju�i i\n"
-"dokumentaciju je obi�no zabranjen.\n"
-"\n"
-"\n"
-"Sva prava na komponente na slede�im CD medijama pripadaju njihovim \n"
-"respektativnim autorima i za�ti�ene su zakonima o intelektuanoj svojini i \n"
-"pravima koji se primenjuju na softverske programe.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Xm,pojavila se gre�ka"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Da li zaista ho�ete da prekinete instalaciju?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "LIcencirani ugovor"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Upoznavanje\n"
-"\n"
-"Operativni sistem i druge komponente dostupne u Mandrake Linux "
-"distribuciji \n"
-"na dalje �e biti zvane \"Softverski Proizvodi\" . Softverski proizvodi "
-"uklju�uju, ali nisu i \n"
-"ograni�eni na, skup programa, metoda, pravila i dokumentaciju koja je "
-"vezanaza operativni \n"
-"sistem i druge komponente Mandrake Linux distribucije.\n"
-"\n"
-"\n"
-"1. Licencni ugovor\n"
-"\n"
-"Pa�ljivo pro�itajte ovaj dokument. Ovaj dokument je licencni ugovor "
-"izme�uizme�u vas i   \n"
-"MandrakeSoft S.A. koji pola�e pravo na Softverske Proizvode.\n"
-"Instaliranjem, kopiranjem ili upotrebom Softverskih Proizvoda u bilo kom "
-"vidu, vi eksplicitno \n"
-"prihvatate i potpuno se sla�ete sa prihvatanjem postavki i uslova i stanja u "
-"ovoj Licenci. \n"
-"Ukoliko se ne sla�ete sa bilo kojim delom Licence, nemate pravo da "
-"instalirate, kopirate ili koristite \n"
-"Softverske proizvode. \n"
-"Bilo koji poku�aj instalacije, dupliciranja ili upotrebe Softverskih "
-"Proizvoda na na�in koji se ne sla�e sa \n"
-"postavkama i uslovima ove Licence �e voditi gubitku va�ih prava pod ovom \n"
-"Licencom. Na osnovu gubitka Licence, morate odmah uni�titisve kopije \n"
-"Softverskih Proizvoda.\n"
-"\n"
-"\n"
-"2. Ograni�ena Garancija\n"
-"\n"
-"Softverski Proizvodi i prate�a dokumentracija su omogu�ene \"kao takve\", i "
-"bez garancije, do granica \n"
-"koje su dozvoljene zakonom.\n"
-"MandrakeSoft S.A. ne�e, u svim uslovima i u granicama zakona, biti ogovoran "
-"za bilo koje specijalne,\n"
-"slu�ajne, direktne ili indirektne �tete (uklju�uju�i neograni�ene�tete ili "
-"gubitke \n"
-"u poslovanju, prekidu poslovanja, finansijskim gubicima, zakonske tra�nje i "
-"kazne koje su rezultat sudske \n"
-"odluke, ili za bilo koji drugi gubitak) koje proizilaze iz upotrebe ili "
-"nemogu�nosti kori��enja Softverskih \n"
-"Proizvoda, �ak iako je MandrakeSoft S.A. savetovao i ukazivao na mogu�nost "
-"pojave takve \n"
-"�tete.\n"
-"\n"
-"Ograni�ena odgovornosti vezane za posedovanje ili upotrebu zabranjenog "
-"softvera u nekim zemljama\n"
-"\n"
-"Do granica koje su uslovljene zakonom, MandrakeSoft S.A. ili njegovi "
-"distributeri ne�e, ni pod kojim uslovima, biti \n"
-"odgovorni za specijalne, namerne direktne ili indirektne �tete(uklju�uju�i "
-"neograni�ene \n"
-"�tete ili gubitke u poslovanju, prekidu poslovanja, finansijskim gubicima, "
-"zakonske tra�nje \n"
-"i kazne koje su rezultat sudske odluke, ili za bilo koji drugi gubitak) koje "
-"proizilaze \n"
-"iz upotrebe ili nemogu�nosti kori��enja Softverskih Komponenti ili koje "
-"proizilaze download-ovanih softverskih komponenti \n"
-"bilo kog Mandrake Linux sajta koji su zabranjeni ili ograni�eni u nekim "
-"zemljama po lokalnim zakonima.\n"
-"Ova ograni�ena prava se primenjuju, ali nisu i ograni�ena na,kriptografske "
-"komponente \n"
-"koje se nalaze u Softverskim Proizvodima.\n"
-"\n"
-"\n"
-"3. GPL i za nju vezane Licence\n"
-"\n"
-"Softverski proizvodi se sastoje od komponenti kreiranih od strane razli�tih "
-"lica ili entiteta. Ve�ina  \n"
-"od ovih komponenti se nalaze pod postavkama i uslovima GNU Op�te Javne \n"
-"Licence, koja se od sada zove  \"GPL\", ili sli�ne licence. Ve�ina ovih "
-"licenci dozvoljava upotrebu, \n"
-"dupliciranje, adaptaciju ili redistribuciju komponenti koje one obuhvataju. "
-"Molimo Vas da pa�ljivo pro�itte postavke \n"
-"i uslove licencnog ugovora za svaku komponentu pre upotrebe bilo koje "
-"komponenete. Bilo koje pitanje \n"
-"vezano za licencu komponenti treba da bude adresirano na autora komponente a "
-"nena MandrakeSoft.\n"
-"Programi koje je razvio MandrakeSoft S.A. podle�u pod GPL Licencu. "
-"Dokumentacija pisana od \n"
-"strane MandrakeSoft S.A. podle�e pod posebnu licencu. Molim da pogledate "
-"dokumentaciju  \n"
-"za detalje.\n"
-"\n"
-"\n"
-"4. Prava na Intelektualnu svojinu\n"
-"\n"
-"Sva prava na komponente Softverskih proizvoda pripadaju njihovim autorima i "
-"ona \n"
-"su za�ti�ena zakonima o intelektualnoj svojini i pravima koji se primenjuju "
-"na softverske programe.\n"
-"MandrakeSoft S.A. je rezervisao svoja prava na modifikovanje ili adaptaciju "
-"SoftverskihProizvoda, kako za celinu tako i za \n"
-"delove, za sve sve svrhe i sve upotrebe.\n"
-"\"Mandrake\", \"Mandrake Linux\" i pridru�eni logotipi i oznake MandrakeSoft "
-"S.A.  \n"
-"\n"
-"\n"
-"5. Zakonska prava \n"
-"\n"
-"Ukoliko se bilo koji deo ovog ugovora izbegava, nelegalno i van  sudske "
-"odluke, ovaj \n"
-"deo se isklju�uje iz ovog ugvora. Obavezni ste da primenjujeteostale delove "
-"ovog\n"
-"ugovora.\n"
-"Postavke i uslovi ove Licence su odre�eni Zakonima Francuske.\n"
-"Svi nesporazumi bi trebali biti re�eni van suda. Kao poslednje \n"
-"sredstvo, nesporazumi �e biti upu�eni na odgovaraju�e Sudske ustanove u "
-"Parizu - Francuska.\n"
-"Za bilo koje pitanje koje je vezano za ovaj dokument, kontaktirajte  "
-"MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatura"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Izaberite  raspored tastature."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Ovde je predstavljena cela lista dostupnih tastatura"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Koju  instalacionu klasu birate ?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalacija/A�uriranje"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Da li je ovo instalacija ili a�uriranje ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Preporu�eno"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "A�uriranje"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "A�uriranje samo paketa"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Izaberite tip mi�a."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port za mi�a"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Izaberite na koji serijski port je va� mi� priklju�en."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulacija tastera"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulacija 2 tastera"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulaci�a 3 tastera"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfiguri�em PCMCIA kartice..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfiguracija  IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nema dostupnih particija"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Skeniranje particija za pronala�enje ta�ke montiranja"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Izaberite ta�ke montiranja"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ne mogu pro�itati tabelu particija, mnogo je iskvarena za mene :(\n"
-"Poku�a�u dalje zaobilaze�i lo�e particijeMogu poku�ati da formatiram lo�e "
-"particije (SVI PODACI �e biti izgubljeni !).\n"
-"Drugo re�enje je da se DrakX onemogu�i da modufikuje tabelu particija.\n"
-"(gre�ka je %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ne mo�e da ispravno pro�ita tabelu particija.\n"
-"Dalji nastavak ide na va� rizik !"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nema slobodnog prostora za 1MB bootstrap! Instalacija �e se nastaviti, ali "
-"da bi podigli va�sistem, mora�ete da kreirate bootstrap particiju u "
-"DiskDrake-u"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Nije root particije potrebne za a�uriranje"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Root particija"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Na kojoj particiji je root particija (/) va�eg sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Treba da resetujete ma�inu za primenu izmena u tabeli particija"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Izaberi particije za formatiranje"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Proveri lo�e blokove ?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatiranje particiju"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreiranje i formatiranje datoteke %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nema dovoljno swap-a da zavr�i instalaciju, dodajte jo� swap-a"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Tra�im pakete"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Tra�im pakete za a�uriranje..."
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Va� sistem nema dovoljno mesta za instalaciju ili a�uriranje (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Kompletna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimalna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Preporu�ena (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Molim Vas da izaberete u�itavanje ili snimanje selekcije paketa na disketu.\n"
-"Format koji se koristi je isti kao i kod  auto_install generisanih disketa."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "U�itaj sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "U�itavam sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Odabir paketa"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Ubacite disketu koja sadr�i selekciju paketa"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Snimi na disketu"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Selektovana veli�ina je ve�a od slobodnog prostora"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Tip instalacije"
-
-#: ../../install_steps_interactive.pm_.c:672
-#, fuzzy
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Niste selektovali nijednu grupu paketa\n"
-"Izaberite minimalnu instalaciju koju �elite"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Sa X-ovima"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Sa osnovnom dokumentacijom (preporuka!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Stvarno minimalna instalacija (posebno bez urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ukoliko imate gore navedene CD-ove, kliknite na  Ok.\n"
-"Ukoliko nemate nijedan CD, kliknite na  Cancel.\n"
-"Ako vam nedostaju  samo neki CD-ovi , deselektujte ix, a onda kliknite na Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ozna�en kao \"%s"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Pripremam instalaciju"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaliram pakete %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Postinstalaciona konfiguracija"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ubacite Boot disketu u ure�aj %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ubacite Update Modules disketu u ure�aj %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Zbog razli�itih op�tix zahteva koji se odnose na ovaj  softver  kao i "
-"izlo�enost\n"
-"mnogim zakonodavstvima,kupac i/ili korisnik softvera treba\n"
-"da proveri da li zakon omogu�ava  download i upotrebu softvera.\n"
-"\n"
-"Kupci  i korisnici treba da znaju da ne trebada izvrdavaju\n"
-"zakon.Ukoliko se to  ipak desi, oni  �e snositi sankcije\n"
-"\n"
-"MandrakeSoft nije odgovoran za bilo kakve gubitke ili �tetekoje mogu nastati,"
-"niti za sudske kazne koje se mogu javiti.\n"
-"\n"
-"\n"
-"Za bilo kakva pitanja vezana za ovu temu kontaktirajte \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Sada imate mogu�nost da download-ujete a�urirane pakete koji su\n"
-"kreirani nakon izlaska distribucije.\n"
-"\n"
-"Dobi�ete sigurnosne ispravke ili ispravke u programima, ali za da bi ovo "
-"uradili morate\n"
-"da imate Internet konekciju.\n"
-"\n"
-"da li �elite da instalirate update-ove ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"KOntaktirajte Mandrake Linux web sajt da bi dobili listu dostupnih mirror-a"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izaberite mirror sa kog �ete skinuti pakete"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kantaktirajte mirror za listu mogu�ih paketa"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Koja je va�a vremenska zona ?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Va� sistemski (BIOS) �asovnik je pode�en na GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatska sinhronizacija vremena (preko NTP-a)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Udaljeni CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Bez �tampa�a"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Da li imate ISA zvu�nu karticu?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Pokrenite \"sndconfig\" nakon isntalacije da bi podesili svoju zvu�nu karticu"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nije detektovana zvu�na kartica. Pokrenite \"harddrake\" nakon instalacije"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sa�etak"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mi�"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Vremenska zona"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "�tampa�"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN kartica"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Zvu�na kartica"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV katica"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokalne datoteke"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Unesi root lozinku"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez lozinke"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ova lozinka je suvi�e jednostavna (treba da ima bar %d znakova)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS Domen"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Startni disk obezbe�uje na�in podizanja va�eg Linux sistema bez zavisnosti\n"
-"od normalnog startera. Ovo je korisno ako ne �elite da instalirate\n"
-"SILO(ili grub) na va� sistem, ako drugi operativni sistem ukloni SILO, ili "
-"SILO ne\n"
-"radi sa va�im hardverom. Startni disk mo�ete koristiti sa Mandrake Linux\n"
-"'diskom za spasavanje', �to olak�ava oporavak u slu�aju te�e havarije.\n"
-"Ukoliko �elite da kreirate startnu disketu za va� sistemubacite disketu u "
-"pogon i pritisnite \"Da\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Prvi flopi/disketni ure�aj "
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Drugi flopi/disketni ure�aj"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Presko�i"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, fuzzy, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Startni disk obezbe�uje na�in podizanja va�eg Linux sistema bez zavisnosti\n"
-"od normalnog startera. Ovo je korisno ako ne �elite da instalirate\n"
-"LILO(ili grub) na va� sistem, ako drugi operativni sistem ukloni LILO, ili "
-"LILO ne\n"
-"radi sa va�im hardverom. Startni disk mo�ete koristiti sa Mandrake Linux\n"
-"'diskom za spasavanje', �to olak�ava oporavak u slu�aju te�e havarije.\n"
-"Da li biste da kreirate startnu disketu za va� sistem?"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(UPOZORENJE! Vi koristite XFS za va�u root particiju,\n"
-"pa kreiranje startnog 1.44 Mb flopija verovatno ne�e uspeti,\n"
-"zato �to XFS tra�i veliki drajver)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Ti malera, nema diskete"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Izabrerite disketni ure�aj koji �ete koristiti  za kreiranje starne diskete"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ubacite disketu u ure�aj %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Kreiram startni disk..."
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Pripremam starter..."
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Po�to izgleda da imate staromodnu ili nepoznatu \n"
-" ma�inu, yaboot starter ne�e raditi kod vas.\n"
-"Instalacija �e biti nastavljena, ali �ete morati da\n"
-" BootX da bi podigli sistem"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Da li �elite da koristite aboot ?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Gre�ka pri instalaciji aboot-a, \n"
-"Da li da probam da instaliram �ak ako to vodi uni�tenju prve particije?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instaliram starter"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalacija startera neuspela. Gre�ka je:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Mora�ete da promenite Open Firmware boot-ure�aj da \n"
-" bi mogli da koristite starter.  Ukoliko ne vidite prompt\n"
-" pri restartu dr�ite Command-Option-O-F pri startanju i unesite:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Onda ukucajte: shut-down\n"
-"Kada slede�i put startujete ma�inu trebali bi da vidite staterov prompt."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ubacite praznu disketu u ure�aj %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Kreiram auto instalacioni flopi"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Neki koraci nisu kompletirani.\n"
-"\n"
-"Da li stvarno �elite da zavr�ite ?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"�estitamo, instalacija je zavr�ena.\n"
-"Izvadite disketu iz drajva i pritisnite <Enter> da se ra�unar resetuje.\n"
-"\n"
-"\n"
-"Za informacije o popravkama koje su na raspolaganju za ovo izdanje\n"
-"Mandrake Linux Linux-a, pro�itajte deo 'Errata' koji mo�ete na�i na\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informacije o konfigurisanju va�eg sistema mo�ete na�i u post-instalacionom\n"
-"poglavlju zvani�nog Mandrake Linux 'Vodi�a za korisnike'."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Kreiraj auto instalacionu disketu"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Auto instalacija mo�e biti potpuno automatizovana ukoliko �elite,\n"
-"u tom slu�aju preuze�e kontrolu nad hard-diskom!!\n"
-"(ovo se odnosi na instalaciju na drugoj ma�ini).\n"
-"\n"
-"Mo�da volite da ponovite instalaciju.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatski"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ponavljanje"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Sa�uvaj selekciju paketa"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Instalacija %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"<Tab>/<Alt-Tab> kret. izme�u elemenata | <Space> izbor | <F12> slede�i ekran"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "nedostaje kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Izaberite fajl"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Napredno"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Osnovno"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Samo momenat..."
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Pro�iri stablo"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Skupi stablo"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Birajte: ravno ili grupno sortirano"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Lo� izbor, probajte ponovo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Va� izbor ? (po default-u %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Unosi koje treba da popunite:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Va� izbor? (0/1, default `%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Taster `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Da li �elite da kliknete na ovaj taster? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Va� izbor? (default `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Postoji mnogo stvari za izbor iz (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Izaberite prvi broj od 10 koje �elite da editujete,\n"
-"ili samo kliknite na Enter da bi nastavili.\n"
-"Va� izbor? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Napomena, promenjeno ime:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Re-submit"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "�e�ki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Nema�ki"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "�panski"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finski"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francuski"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norve�ki"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Poljski"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruski"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "�vedski"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK tastatura"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US tastatura"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanski"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Jermenski (stari)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Jermenski (typewriter)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Jermenski (fonetski)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbejdzan  (latinica)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgijski"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bugarski (fonetski)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bugarski (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilski (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Beloruski"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "�vajcarski (Nema�ki raspored)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "�vajcarski (Francuski  raspored)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "�e�ki (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Nema�ki (bez mrtvih tastera)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danski"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norve�ki)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (�vedski)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonski"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijski (\"Ruski\" raspored)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijski (\"Latini�ni\" rapored)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Gr�ki"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ma�arski"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Hrvatski"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Jevrejski"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Jevrejski (Fonetski)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranski"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandski"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italijanski"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japanski 106 tastera"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korejanska tastatura"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latino-Ameri�ki"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvanski AZERTY(stari)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanski AZERTY(novi)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanski \"number row\"QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanski \"fonetski\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Letonski"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonski"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Danski"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Poljski (qwerty raspored)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Poljski (qwertz raspored)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugalski"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadski (Kvebek)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumunski (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumunski (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruski (Javerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovena�ki"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slova�ki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slova�ki (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Srpski (�irilica)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamilski"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr " Thai tastatura"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tad�ikistanska tastatura"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turski (tradicionalni \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turski (moderni \"Q\" model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrajinski"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US tastatura (internacionalna)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vijetnamski  \"number row\"QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Srpski (latinica)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-#, fuzzy
-msgid "Left \"Windows\" key"
-msgstr "Dobavi Windows fontove"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kru�no montiranje  %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Ukloni prvo logi�ke volumene\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "PCMCIA podr�ka ne postoji vi�e za 2.2 kernele. Koristite 2.4 kernel."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun Mi�"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generi�ki PS2 mi� sa to�ki�em"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 taster"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generi�ki 2 tastera mi�"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generic"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "To�ki�"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serijski"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generi�ki 3 tastera mi�"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC serija (serijski)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM serija"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (serijski, stari C7 tip)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "bus mi�"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 tastera"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 tastera"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "nijedan"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Nema mi�a"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Molim Vas da testirate mi�a"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Da bi mogli da aktivirate mi�a"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "pomerite to�ki� !"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Kraj"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Slede�i  ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Prethodni"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Da li je ovo ispravno ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Konektuj na internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Naj�e��i na�in za konekciju sa adsl je pppoe.\n"
-"Me�utim, postoje konekcije koje koriste pptp i neke koje koriste dhcp.\n"
-"Ukoliko ne znate koja je, izaberite 'koristi pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "koristi dhcpd"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "koristi pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "koristi pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Kog dhcp klijenta �elite da koristite ?Postavljeni je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nije detektovana nijedna mre�na kartica.\n"
-"Ne mogu da podesim ovaj tip konekcije."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Izaberite mre�ni interfejs"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Izaberite mre�ni adapter koji �elite da koristite za konekciju na internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Nije prona�ena mre�na kartica"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Pode�avanje mre�e"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Molim unesite  ime hosta ukoiko ga znate\n"
-"'Neki DHCP serveri zahtevaju ime hosta da bi radili.\n"
-"Va�e ime hosta treba da bude puno ime kao npr.\n"
-"``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Ime hosta:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "�arobnjak za pode�avanje mre�e"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Eksterni ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interna  ISDN kartica"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kakva je vrsta va�e ISDN kenekcije ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Koju ISDN konfiguraciju vi�e preferirate?\n"
-"\n"
-"* Stara kofiguracja koristi isdn4net. Ona sadr�i mo�ne alatke, ali je\n"
-"  problemati�na za pode�avanje pogotovo za po�etnike, i nije uobi�ajena.\n"
-"\n"
-"* Nova konfiguracija je jednostavnija za razumeti, standardnija,\n"
-"  ali sa manje opcija i alata.\n"
-"\n"
-"Mi preporu�ujemo lak�u (jednostavniju) konfiguraciju.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nova konfiguracija (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracija (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN Konfiguracija"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Izaberite svog provajdera.\n"
-" Ukoliko nije na listi, izaberite Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Evropski protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Evropski protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol za statak sveta"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol za Ostatak sveta \n"
-" bez D-kanala (zakupljene linije)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Koji protokol �elite da koristite ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Kakvu vrstu kartice imate?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ne znam"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ukoliko imate ISA karticu, vrednosti na slede�em ekranu bi trebale biti "
-"ispravne.\n"
-"\n"
-"Ukoliko imate PCMCIA karticu, morate znati  irq i  io za va�u karticu.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Prekini"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Nastavi"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Koja je va�a ISDN kartica ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Detektovana je ISDN PCI kartica, nepoznatog tipa. Izaberite jednu PCI "
-"karticu na slede�em ekranu."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Nije prona�ena ISDN PCI kartica.Izaberite jednu na slede�em ekranu."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Izaberite serijski port  na koji je modem povezan."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Dialup opcije"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Ime konekcije"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Broj telefona"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID za logovanje"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Bazirano na skripti"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Bazirano na terminalu"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Ime domena"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Prvi DNS Server (opcija)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Drugi DNS Server (opcija)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo�ete se diskonektovati ili rekonfigurisati konekciju."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Podesi internet konfiguraciju"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Trenutno ste konektovani na Internet"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Sada se mo�ete konektovati na Internet ili rekonfigurisati konekciju"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Trenutno niste konektovani na Internet"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Konektuj"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Diskonektuj"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Podesi konekciju"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internet konekcija i  konfiguracija"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Sada treba da podesimo %s konekciju."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Sada treba da podesimo %s konekciju.\n"
-"\n"
-"\n"
-"Pritisnite \"U redu\" za nastavak."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Pode�avanje mre�e"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Zbog toga �to radite mre�nu instalaciju, va�a mre�a je ve� pode�ena "
-"pode�ena.\n"
-"Kliknite na  OK  zadrd�ali konfiguraciju Network/Internet konekcije, ili "
-"cancel da bi ponovo uradili kofiguraciju.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Dobrodo�li u program za Pode�avanje Mre�ne konekcije\n"
-"\n"
-"Sada treba da konfiguri�emo va�u internet/mre�nu konekciju.\n"
-"Ukoliko ne �elite auto detekciju, deselektujte opciju.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Izaberite profil za konfigurisanje"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Koristi auto detekciju"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detektujem  ure�aje..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normalna modemska konekcija"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "Detektovano na portu %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN konekcija"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detektovano %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL konekcija"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "Detektovano na interfejsu %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kablovska konekcija"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Detektovana je kablovska konekcija "
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN konekcija"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "detektovana mre�na kartica(e)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Izaberite tip konekcije koji �elite da koristite"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Vi ste podesili vi�e na�ina za konektovanje na Internet.\n"
-"Izaberite jedan od njih koji �elite da koristite.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet konekcija"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Da li �elite da startujete konektovanje pri startanju sistema ?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Pode�avanje mre�e"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Mre�a mora biti restartovana"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Pojavio se problem tokom restartovanja mre�e?\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"�estitamo, mre�na i internet konfiguracija je zavr�ena.\n"
-"\n"
-"Konfiguracija se sada mo�e primeniti na sistem.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Kada se to uradi, trebali bi da restartujete X\n"
-"okru�enje da bi izbegli probleme sa promenom hostname-a."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Pojavili su se problemi tokom konfiguracije.\n"
-"Proverite svoju konekciju preko net_monitor ili mcc. Ukoliko va�a konekcija "
-"ne radi, treba da ponovite konfiguraciju"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"Upozorenje: Ovaj ure�aj je ve� prethodno konfigurisan za konektovanje na "
-"Internet.\n"
-"Samo prihvaitite da bi postavku ostavili istom.\n"
-"Izmena polja koje vidite �e poni�titi postoje�u konfiguraciju."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Molim unesite IP konfiguraciju za ovu ma�inu.\n"
-"Svaka stavka treba de bude tavka treba da bude uneta kao\n"
-"IP adresa (na primer, 123.45.67.89)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Pode�avanje mre�nog ure�aja %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr "(drajver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Mre�na maska"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatski IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa treba da bude u formatu 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Molim unesite ime va�eg domena, ime hosta, kao IP adrese dodatnih\n"
-"'nameserver'-a. Ime va�eg hosta treba da bude puno kvalifikovano ime hosta,\n"
-"kao na pr.  ``mybox.mylab.myco.com''.\n"
-"Ako nemate dodatnih 'nameserver'-a, ostavite ta polja prazna."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (e.g. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway ure�aj"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Pode�avanje proksija"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Track mre�na kartica id (korisno za laptop ra�unare)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy treba da bude http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy treba da bude ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Konfiguracija interneta"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Da li ho�ete da se konektujete na internet sada?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testiranje konekcije..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sistem je trenutno konektovan na Internet"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Iz sigurnosnih razloga, on �e sada biti diskonektovan."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Izgleda da sistem nije konektovan na Internet.\n"
-"Probajte da promenite konfiguraciju."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konfiguracija Internet konekcije"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Molim VAS da popunite ili ozna�ite polja ispod"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ kartice"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "(DMA) kartice"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr " IO kartice"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr " IO_0 kartice"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 kartice"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Va� li�ni broj telefona"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Ime provajdera (npr. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Broj telefona provajdera"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Provajderov dns 1 (opciono)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Provajderov dns 2 (opciono)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Izaberi svoju zemlju"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Mod za biranje"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Brzina konekcije "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Vreme pauze konekcije (u sek.)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Logovanje za ra�un (korisni�ko ime)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Lozinka za ra�un"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montiranje nije uspelo: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Extended particija nije podr�ana na ovoj platformi"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Imate prazninu u va�oj tabeli particija ali je ne mogu korisiti.\n"
-"Jedino re�enje je da pomerite primarnu particiju tako da praznina bude\n"
-"do extended particija"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Otvaranje iz datoteke %s nije uspelo: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Lo�e backup-ovana datoteka"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Gre�ka kod unosa u datoteka %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Ne�to lo�e se de�ava sa va�im hard diskom. \n"
-"Test integriteta podataka nije pro�ao. \n"
-"To zna�i da sve �to se nalazi na disku �e zavr�iti kao �ubre"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "mora imati"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "va�no"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "veoma lepo"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "lepo"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "mo�da"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Op�ti Unix-ov sistem za �tampanje"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nove Generacije"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Demon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - �tampaj, nemoj da pamti�"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokalni  �tampa�"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Udaljeni �tampa�"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "�tampa� ili Udaljeni CUPS server"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "�tampa� ili Udaljeni lpd server"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Mre�ni �tampa� (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "�tampa� na SMB/Windows 95/98/NT serveru"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "�tampa� na NetWare serveru"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Unesite URI za �tampa�"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Ubaci naredbu u komandu"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Nepoznati model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokalni �tampa�i"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Udaljeni �tampa�i"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " na parelelnom portu \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB �tampa� \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", multi-funkcionalni ure�aj na paralelnom portu \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", multi-funkcionalni ure�aj na USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multi-fuunkcionalni ure�aj na HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", multi-funkcionalni ure�aj"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", �tampaj na %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "na LPD serverr \"%s\", �tampa� \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "na Windows server \"%s\", share \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "na Novell server \"%s\", �tampa� \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", koristim komandu %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Raw �tampa� (bez drajvera)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(na ovoj ma�ini)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na CUPS server \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Podrazumevano)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Izbor povezanosti �tampa�a"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kako je �tampa� povezan?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"�tampa�e na udaljenom CUPS serveru nemate da bi ih ovde podesili; ovi "
-"�tampa�i �e biti automatski detektovani."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS konfiguracija"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Odredite CUPS server"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Da bi dobili pristup �tampa�ima na udaljenim CUPS serverima na va�oj "
-"lokalnoj mre�ine morate ni�ta da pode�avate; CUPS serveri automatski "
-"obave�tavaju va�u ma�inuo svojim �tampa�ima. Svi �tampa�i koji su trenutno "
-"poznati va�oj ma�ini su prikazani u \"Remote printers\" delu  glavnog "
-"prozora Printerdrake-a. Kada va� CUPS server nije na lokalnoj ma�ini, morate "
-"uneti CUPS serverovu IP adresu a opciono broj porta da bi dobili informacije "
-"o �tampa�u od servera, ili ove linije za unos ostavite praznima."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Obi�no CUPS je automatski pode�en na osnovu mre�nog okru�enja, tako da "
-"mo�ete pristupiti �tampa�ima na CUPS serverima na va�oj lokalnoj mre�i. "
-"Ukoliko ovo ne funkcioni�e kako treba, isklju�ite \"Automatsku CUPS "
-"konfiguraciju\" u izmenite va� fajl /etc/cups/cupsd.conf ru�no. Ne "
-"zaboravite da nakon toga restartujete CUPS (komanda: \"service cups restart"
-"\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa treba da izgleda kao npr. 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Broj porta bi trebao da bude broj !"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "SMB server IP:"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatska CUPS konfiguracija"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Detektujem ure�aje..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Testiranje portova"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Dodajte novi �tampa�"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Dobrodo�li u �arobnjak za konfigurisanje �tampa�a\n"
-"\n"
-"Ovaj �arobnjak �e vam omogu�iti da instalirate lokalne ili udaljene �tampa�e "
-"sa ovema�ine kao i drugih ma�ina na mre�i.\n"
-"\n"
-"Od vas �e biti tra�ene sve neophodne informacije za pode�avanje �tampa�a a "
-"dobi�ete pristup svim dostypnim drajverima, njihovim opcijama, i tipovima "
-"konekcije �tampa�a."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokalni �tampa�"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Doborodo�li u �arobnjak za konfigurisanje �tampa�a\n"
-"\n"
-"Ovaj �arobnjak �e vam pomo�i da instalirate va� �tampa�(e) povezan(e) na "
-"ovaj ra�unar.\n"
-"\n"
-"Priklju�ite va� �tampa�(e) u ra�unar i uklju�ite ga(ih). Kliknite na on "
-"\"Slede�e\" kada budete spremni, a \"Poni�ti\" kada ne �elite da pode�avate "
-"�tampa�(e).\n"
-"\n"
-"Zapamtite da neki ra�unari mogu da se blokiraju tokom auto-detekcije, "
-"isklju�ite  \"Auto-detekciju �tampa�a\" da bi ru�no instalirali �tampa�. "
-"Koristite \"Ekspert mod\" u printerdrake kada �elite  da podesite�tampanje "
-"na udaljenom �tampa�u koji nije automatski prikazan."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Auto-detekcija �tampa�a"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"�estitamo, ba� �tampa� je sada instaliran i pode�en!\n"
-"\n"
-"Mo�ete da �tampate koriste�i \"�tampaj\" komandu u va�oj aplikaciji (obi�no "
-"u \"Fajl\" meniju).\n"
-"\n"
-"Ukoliko �elite da dodate, uklonite ili promenite ime �tampa�u, ili �elite da "
-"promenite default opcije (papir, kvalitet �tampanja, ...), izaberite "
-"\"�tampa�\" u \"Hardver\" sekciji Mandrake Kontrolnog Centra."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Auto-detekcija �tampa�a"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake je u mogu�nosti da auto-detektuje va� lokalno vezan paralelni "
-"ili USB �tampa� umesto vas, ali imajte na umu da auto-detekcija MO�E "
-"BLOKIRATI VA� SISTEM A TO MO�E VODITI O�TE�ENJU FAJL SISTEMA! Radite ovo ali "
-"na  SOPSTVENI RIZIK!\n"
-"\n"
-"Da li �elite da auto-detektujete �tampa�?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Koristi auto detekciju"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Izaberite korisnike ru�no"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Detektovan %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "�tampa� na paralelnom portu \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB �tampa� \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Nije prona�en lokalni �tampa�! Da bi ru�no instalirali �tampa� unesite ime "
-"ure�aja/ime fajla u liniji za unos (Paralelni portovi: /dev/lp0, /dev/"
-"lp1, ..., je ekvivalentno LPT1:, LPT2:, ..., prvi USB �tampa�: /dev/usb/lp0, "
-"drugi USB �tampa�: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Morate uneti ure�aj ili ime fajla!"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Nije prona�en lokalni �tampa�!"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Mre�ni �tampa�i mogu biti instalirani nakon instalacije sistema. Izaberite "
-"\"Hardver\" a onda \"�tampa�\" u Mandrake Kontrolnom Centru."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Da bi instalirali mre�ne �tampa�e, kliknite \"Poni�ti\", pre�ite na "
-"\"Ekspert mod\", i kliknite \"Dodajte novi �tampa�\" ponovo."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Prikazani �tampa� je auto-detektovan, a ukoliko to nije onaj koji �elite da "
-"podesite, unesite ime/ime fajla ure�aja u liniju za unos"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Ovde se nalazi lista svih auto-detektovanih �tampa�a. Izaberite �tampa� koji "
-"�elite ili unesite imeime fajla ure�aja u liniji za unos"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Prikazani �tampa� je auto-detektovan. Pode�avanje �tampa�a �e biti potpuno "
-"automatsko. Ukoliko va� �tampa� nije ispravno detektovan ili �elite da sami "
-"pode�avate �tampa�, uklju�ite \"Ru�na konfiguracija\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Ovde se nalazi lista svih auto-detektovanih �tampa�a. Izaberite �tampa� koji "
-"�elite da podesite. Pode�avanje �tampa�a �e biti potpuno automatsko. Ukoliko "
-"va �tampa� nije pravilno detektovan ili vi�e �elite da ga sami podesite, "
-"uklju�ite \"Ru�na konfiguracija\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Izaberite port na koji je va� �tampa� povezan ili unesite ime/ime fajla "
-"ure�aja u liniju za unos"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Izaberite port na koji je va� ra�unar povezan."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalenti su LPT1:, "
-"LPT2:, ..., prvi USB �tampa�: /dev/usb/lp0, drugi USB �tampa�: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Morate iabrati/uneti �tampa�/ure�aj!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Ru�na konfiguracija"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Da li je va� �tampa� multi-funkcionalni ure�aj iz HP (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 sa skenerom)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Instaliram HPOJ paket..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Proveravam ure�aj i pode�avam HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Instaliram SANE paket..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skeniram na va�em HP multi-funkcionalnom ure�aju"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Kreiram port dostupan za CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "U�itavam CUPS bazu podataka..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opcije za udaljeni lpd"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Da bi koristili udaljeni lpd �tampa�, morate da obezbedite ime hosta za "
-"server za �tampanje kao i ime �tampa�a na tom serveru."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Ime udaljenog host-a"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Ime udaljeni �tampa�a"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Nedostaje ime udaljenog host-a!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Nedostaje ime udaljenog �tampa�a!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT)  opcije �tampa�a"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Da biste mogli da �tampate na SMB �tampa�u, treba da navedete\n"
-"ime hosta (koje nije uvek isto kao TCP/IP ime ma�ine);\n"
-"IP adresu �tampa�evog servera; deljeno ime �tampa�a kome pristupate,\n"
-"kao i potrebna korisni�ka imena i lozinke."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB server  host:"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB server IP:"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Deljeno (zajedni�ko)  ime :"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Radna grupa(Workgroup):"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Morate dati ili ime servera ili njegov IP!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Nedostaje deljeno ime za Samba-u!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare opcije �tampa�a"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Da biste mogli da �tampate na NetWare �tampa�, treba da navedete ime  "
-"NetWare servera za �tampa� (koje nije uvek isto kao TCP/IPhostname! );te  "
-"ime 'reda' �tampa�a kome pristupate,kao i potrebna korisni�ka imena i "
-"lozinke."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Server �tampa�a:"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Print Queue ime:"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Nedostaje ime NCP servera!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Nedostaje ime za NCP red!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket Opcije �tampa�a"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Da bi �tampali na TCP ili socket �tampa�, morate da obezbedite ime hosta za "
-"�tampa�a te (opcija) broj porta. Na HP JetDirect serverima broj porta je "
-"obi�no 9100, a na drugim serverima mo�e biti druga�iji. Pogledajte upustvo "
-"koje ste dobili uz hardver."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Ime hosta za �tampa�"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Nedostaje ime hosta!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Ure�aj za �tampa� URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Mo�ete direktno odrediti URI za pristup �tampa�u. URI mora ispunjavati ili "
-"CUPS ili Foomatic specifikacije. Zapamtite da nisu svi URI tipovi podr�ani."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Morate uneti validan URI!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Svaki �tampa� mora da ima ime (na primer \"�tampa�\"). Polja za Opis i "
-"Lokaciju ne moraju biti popunjena. To su samo korisne napomene za korisnike."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Ime �tampa�a"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Opis"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lokacija"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Pripremam bazu podataka za �tampa�e..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Va� model �tampa�a"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake je upore�ivao ime modela dobijenog autodetekcijomsa modelima "
-"prikazanim u njegovoj bazi podataka da bi prona�ao odgovaraju�i. Ovaj izbor "
-"mo�e biti pogre�an, posebno kada se va� �tampa� uop�tene nalazi u bazi "
-"podataka. Zato proverite da je izbor ispravan i kliknite \"Ovaj model je "
-"ispravan\" ukoliko jeste a ukoliko nije, kliknite \"Ru�no izaberite model\" "
-"da bi mogli da sami izaberete �tampa� na slede�em ekranu.\n"
-"\n"
-"Za va� �tampa� Printerdrake je prona�ao:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Ovaj model je ta�an"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Ru�no izaberite model"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Selekcija modela �tampa�a"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Koju model �tampa�a imate?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Proverite da li je Printerdrake auto-detektovao va� �tampa� korektno. "
-"Potra�ite pravi model na listi kada kursor stoji na pogre�no izabranom "
-"modelu ili na \"Raw �tampa�\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Ukoliko se va� �tampa� ne nalazi na listi, izaberite kompatibilni "
-"(pogledajte upustvo za �tampa�) ili  sli�an njemu."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI win �tampa� konfiguracija"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Treba da podesite  OKI laserski win �tampa�. Ovi �tampa�i\n"
-"koriste veoma specijalizovane komunikacione protokole i zbog toga oni rade "
-"samo kada su povezani na prvi paralelni port. Kada je va� �tampa� povezan na "
-"drugi port ili na server pove�ite �tampa� na prvi paralelni port pre nego "
-"i�tampate test stranicu ili va� �tampa� ne�e raditi. Postavke za va� tip "
-"konekcije �e biti ignorisane od strane drajvera."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Konfiguracija Lexmark inkjet �tampa�a"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Drajveri za inkjet �tampa�e koje je obezbedio Lexmark samo podr�avaju "
-"lokalne �tampa�e, a ne i �tampa�e na udaljenim ma�inama ili print serverima. "
-"Pove�ite va� �tampa� na lokalni port ili ga podesite na ma�ini na koju je "
-"povezan."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Da bi mogli da �tampate na va�em Lexmark inkjet �tampa�u morate da imate "
-"drajvere koje je kreirao Lexmark (http://www.lexmark.com/). Idite na US sajt "
-"i kliknite na taster \"Drajveri\". nakon toga izaberite va� model i "
-"operativni sistem, u va�em slu�aju \"Linux\". Drajveri su upakovani u RPM "
-"pakete ili shell skripte sa interaktivnom grafi�kom instalacijom. Ne morate "
-"da dradite ovu konfiguraciju. Pritisnite Cancel odmah nakon Ugovora o "
-"licenci. Onda i�tampajte printhead alignment stranice sa \"lexmarkmaintain\" "
-"a podesite opcije za polo�aj glave sa ovim programom."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"default opcije za �tampa�\n"
-"\n"
-"Proverite da li su veli�ina papira i vrsta tinte/mod �tampanja (ukoliko je "
-"dostupan) kao i hardverska konfiguracija za laserske �tampa�e (memorija, "
-"duplex jedinica, dodatne kasete) pode�eni ispravno. Imajte na umu da pri "
-"visokom kvalitetu �tampe/rezoluciji �tampe �tampanje mo�e biti zna�ajnije "
-"usporeno."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opcija %s mora biti broj!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opcija %s mora biti broj!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opcije %s van opsega!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Da li �elite da podesite ovaj �tampa� (\"%s\")\n"
-"kao default �tampa�?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testiranje stranica"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Izaberite test sranicu koju �elite da �tampate.\n"
-"Napomena: Ukoliko se radi o foto test stranici mo�e biti potrebno mnogo vi�e "
-"vremena da bi se i�tampala a laserski �tampa�i sa malo memorije je �ak ne�e "
-"ni i�tampati. U ve�ini slu�ajeva dovoljno je da i�tampate standardnu test "
-"stranicu."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Bez test stranice"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "�tampaj"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standardna test stranica"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternativna test stranica"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alteernativna test stranica (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Foto test stranica"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Nemoj da �tampaj bilo koju test stranicu"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "�tampam test stran(ice)u..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Test stran(ice)a je poslana �tampa� demonu.\n"
-"To mo�e dovesti do malog odlaganja starta �tampa�a.\n"
-"Status �tampa�a:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Test stran(ice)a je poslana �tampa� demonu.\n"
-"To mo�e dovesti do malog odlaganja starta �tampa�a.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Da li radi ispravno?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Raw �tampa�"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Da bi �tampali fajl iz komandne linije (ili prozora terminala) mo�ete ili "
-"koristiti komandu \"%s <fajl>\" ili prafi�ki alat za �tampanje: \"xpp <fajl>"
-"\" ili \"kprinter <fajl>\". Grafi�ki alati vam dozovoljavaju da izaberete "
-"�tampa� i izmenite opcije veoma lako.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ove komande tako�e mo�ete koristiti u polju \"Komande za �tampanje\" "
-"dijaloga za �tampanje u ve�em broju aplikacija, ali ovde nemojte da "
-"odre�ujete ime fajla jer njega postavlja sama aplikacija iz koje �tampate.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Komanda \"%s\" tako�e dozvoljava izmenu opcija za konkretni posao �tampanja. "
-"Jednostavno dodajte �eljene ocije u komandnu liniju, e. g. \"%s <fajl>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Da bi znali koje su vam opcije dostupne za teku�i �tampa� pro�itajte listu "
-"koja je dole prikazana ili kliknite na taster \"Listu opcija za �tampanje\".%"
-"s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Ovde se nalazi lista dostupnih opcija za �tampanje za teku�i �tampa�:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Da bi �tampali fajl iz komandne linije (prozora terminala) koristite komandu "
-"\"%s <fajl>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ova komanda vam je dostupna i u polju \"Konade za �tampanje\" dijaloga za "
-"�tampanje u ve�ini aplikacija. Ali u tom slu�aju nemojte da upisujete ime "
-"fajla jer je ono ve� dodeljeno od strane aplikacije.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Da bi dobili listu dostupnih opcija za trenutni �tampa� kliknite na taster "
-"\"Lista opcija �tampa�a\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Da bi �tampali fajl iz komandne linije (prozora terminala) koristite komandu "
-"\"%s <fajl>\" ili \"%s <fajl>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Tako�e mo�ete da koristite i grafi�ki interfejs \"xpdq\" za opcije za "
-"pode�avanje poslova �tampanja.\n"
-"Ako koristite KDE kao desktop okru�enje imate \"pani�no dugme\", ikonicu na "
-"desktopu, ozna�enu sa \"ZAUSTAVI �tampa�!\",koji zaustavlja sve poslove "
-"�tampanja jkada kliknete na taj taster. Ovo je na primer korisno kada se "
-"zaglavi papir.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Komande \"%s\" i \"%s\" tako�e omogu�avaju izmenu opcija za konkretni posao "
-"�tampanja. Jednostavno dodajte �eljene opcije u komandnu liniju, e. g. \"%s "
-"<fajl>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Zatvori"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "�tampam/Skeniram na \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "�tampam na �tampa�u \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Lista sa opcijama za �tampa�"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Va� HP multi-funkcionalni ure�aj je automatski pode�en da bi mogao da "
-"skenira. Sada mo�ete da skenirate sa \"scanimage\" (\"scanimage -d hp:%s\" "
-"da bi odredili skener koda imate vi�e od jednog) iz komandne linije ili sa "
-"grafi�kim interfejsima \"xscanimage\" ili \"xsane\". Ukoliko koristite the "
-"GIMP, mo�ete tako�e skenirati biranjem odgovaraju�e stavke u \"Fajle\"/"
-"\"Acquire\" meniju. Pogledajte i \"man scanimage\" i \"man sane-hp\" u "
-"komandnoj liniji za vi�e informacija.\n"
-"\n"
-"Ne koristi \"scannerdrake\" za ovaj ure�aj!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Va� HP multi-funkcionalni ure�aj je automatski pode�en da bi bio u "
-"mogu�nosti da skenira. Sada mo�ete da skenirate iz komandne linije sa  "
-"\"ptal-hp %s scan ...\". Skeniranje iz grafi�kog interfejsa ili iz GIMP-a "
-"nije podr�ano jo� uvek za va� ure�aj. Vi�e informacija mo�ete prona�i u  \"/"
-"usr/share/doc/hpoj-0.8/ptal-hp-scan.html\" fajlu na va�em sistemu. Ukoliko "
-"imate HP LaserJet 1100 ili 1200 mo�ete skenirati samo ako imate instaliranu "
-"skener opciju.\n"
-"\n"
-"Ne koristi \"scannerdrake\" za ovaj ure�aj!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "U�itavam podatke za �tampa� ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Konfiguracija za transfer �tampa�a"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Mo�ete kopirati konfiguraciju �tampa�a koju ste zavr�ili za spooler %s to %"
-"s, va� trenutni spooler. Svi konfiguracioni podaci (ime �tampa�a, opis, "
-"lokacija, tip konekcije, i default opcije) se mogu preuzeti, ali ne i "
-"poslovi �tampanja.\n"
-"Ni svi queues ne mogu biti preba�eni zbog slede�ih razloga:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ne podr�ava �tampa�e na Novell serverima ili �tampa�ima koji �alju "
-"podatke u slobodno-formiranu komandu.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podr�ava samo lokalne �tampa�e, udaljene LPD �tampa�e, i Socket/TCP "
-"�tampa�e.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD i LPRng ne podr�avaju IPP �tampa�e.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Kao dodatak, queues koji su kreirani sa ovim programom ili  \"foomatic-"
-"configure\" ne mogu biti preba�eni."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Tako�e, �tampa�i konfigurisani sa PPD fajlovima koji poti�u od proizvo�a�a "
-"ili sa osnovnim CUPS drajverima ne mogu biti preba�eni."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Ozna�ite �tampa�e koje �elite da prebacite i kliknite na \n"
-"\"Prebaci\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Ne prebacuj �tampa�e"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Prebaci"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"�tampa� \"%s\" ve� postoji pod  %s. \n"
-"Klikni na \"Prebaci\" da bi pre�li preko starog.\n"
-"Mo�ete ukucati i novo ime ili presko�iti ovaj �tampa�."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Ime �tampa�a treba da sadr�i samo slova, brojeve i underscore"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"�tampa� \"%s\" ve� postoji,\n"
-"da li stvarno �elite da ponovo upi�ete njegove opcije?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Novo ime �tampa�a"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Transferi�em %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Prebacili ste svoj biv�i default �tampa� (\"%s\"), Da li treba da bude "
-"ponovo default �tampa� pod novim sistemom za �tampanje %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Osve�avam podatake o �tampa�u..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Pode�avanje udaljenog �tampa�a"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Startujem mre�u ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Podesi mre�u sada"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Mre�na funkcionalnost nije pode�ena"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Treba da podesite udaljeni �tampa�. Za to vam je potreban mre�ni pristup, "
-"ali va�a mre�a nije jo� pode�ena. Ukoliko nastavite bez mre�e konfiguracije, "
-"ne�ete mo�i da koristite �tampa� koji sada pode�avate. Kako �elite da "
-"nastavite?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Nastavi dalje bez pode�avanja mre�e"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Mre�na konfiguracija koja je kreirana tokom instalcije ne mo�e sada da se "
-"pokrene. Proverite da li je mre�a dostupna nakon restarta sistema i "
-"ispravite konfiguraciju koriste�i Mandrake CKontrolni Centar, sekcija "
-"\"Mre�a & Internet\"/\"Konenkcija\", i nakon toga podesite �tampa�, tako�e "
-"kori�tenjem Mandrake Kontrolnog Centra, sekcija \"Hardver\"/\"�tampa�\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Mre�ni pristup nije pokrenut i ne mo�e da se startuje. Proverite va�u "
-"konfiguraciju i va�e hardverske komponente. Onda probajte ponova da podesite "
-"udaljeni �tampa�."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Restartujem sistem za �tampanje ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "veliki"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoidni"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaliram sistem za �tampanje u %s sigurnosnom nivou"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Sada treba da instalirate sistem za �tampanje %s na sistemu koji se nalazi u "
-"%s sigurnosnom nivou.\n"
-"\n"
-"Ovaj sistem za �tampanje pokre�e demon (pozadinski proces) koji �eka na "
-"poslove �tampanja i upravlja njima. Ovaj demon je tako�e dostupan preko "
-"udaljenih ma�ina preko mre�e pa je time podlo�an napadima. Zbog toga samo "
-"par izabranih demona se startuje po default-u na ovom sigurnosnom nivou.\n"
-"\n"
-"Da li stvarno �elite da podesite �tampanje na ovoj ma�ini?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Pokreni sistem za �tampanje pri staranju sistema"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Sistem za �tampanje (%s)ne�e biti automatski pokrenut pri startanju ma�ine.\n"
-"\n"
-"Mogu�e je automatsko startanje isklju�eno promenom na vi�lji nivo "
-"sigurnosti, zbog toga �to je sistem za �tampanje primamljiv za napade.\n"
-"\n"
-"Da li ponovo �elite da automatski startujete sistem za �tampanje ?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Proveravam instalirani softver..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Uklanjam LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Uklanjam LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Izaberite Spooler za �tampa�"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Koji sistem za �tampanje (spooler) �elite da koristite ?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Pode�avam �tampa� \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Instaliram Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opcije �tampa�a"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Pripremam PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Pode�avam �tampa� \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Da li biste da podesite �tampa�?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Sistem za �tampanje: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Slede�i �tampa�i su pode�eni. Dvokliknite na �tampa� da bi promenili njegove "
-"postavke; da bi ga postavili za default �tampa�; da bi videli informacije o "
-"njemu; ili da bi omogu�ili �tampa� na udaljenom CUPS serveru dostupnim za "
-"Star/Open Office."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Slede�i �taThe following printers are configured. Double-click on a printer "
-"to change its settings; to make it the default printer; or to view "
-"information about it."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Osve�i listu �tampa�a (da bi prikazao sve dostupne udaljene CUPS �tampa�e)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Promenite sistem za �tampanje"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normalni Mod"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Da li ho�ete da podesite jo� jedan �tampa�?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Izmena konfiguracije �tampa�a"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"�tampa� %s\n"
-"Da li ho�ete da izmenite opcije za ovaj �tampa�?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Uradi to!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tip konekcije �tampa�a"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Ime, opis i lokacija �tampa�a"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Proizvo�a�, model i drajver �tampa�a"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Proizo�a� i model �tampa�a"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Podesi ovaj �tampa� kao default"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Dodaj ovaj �tampa� u Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Ukloni ovaj �tampa� iz Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "I�tampaj test stranice"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Da li znate kako da koristite ovaj �tampa�"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Ukloni �tampa�"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Uklanjam stari �tampa� \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Default �tampa�"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "�tampa�  \"%s\" je sada postavljen kao default �tampa�."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Dodajem �tampa� u Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "�tampa� \"%s\" je uspe�no dodan u Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Neuspelo dodavanje �tampa�a \"%s\" u Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Uklanjanje �tampa�a iz Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "�tampa� \"%s\" je uspe�no uklonjen iz Star Office/OpenOffice.org-a"
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-"Neospeo poku�aj uklanjanja �tampa�a \"%s\" iz Star Office/OpenOffice.org-a"
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Da li ho�ete da uklonite �tampa� \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Uklanjam �tampa� \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Pode�avanje proksija"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Dobrodo�li u alat za konfiguraciju proxy-ja.\n"
-"\n"
-"Ovde mo�ete da podesite va�e http i ftp proksije\n"
-"sa ili bez korisni�kog imena i lozinke\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Molim Vas da unesete http proxy informacije\n"
-"Ostavite polja praznima ukoliko ne �elite da koristetite proksi"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url treba da po�inje sa http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Broj porta bi trebao da bude numeri�ka oznaka (broj)"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Molim Vas da unesete informacije o ftp proxy-ju\n"
-"Polja ostavite praznima ukoliko ne �elite da koristite ftp proksi"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url treba da po�inje sa 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Unesite proxy korisni�ko ime i lozinku, ukoliko postoje.\n"
-"Polja ostavite paznima ukoliko ne �elite da koristite korisni�ko ime/lozinku"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "logovanje"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "lozinka"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "pomovo unesite lozinke"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Nepodudarnost lozinki. Probajte ponovo!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nije mogu�e dodati particiju na _formatiran_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nije mogu� unos u fajl %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid neuspelo"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid neuspelo (mo�da nedostaje raidtools ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nema dovoljno particija za RAID nivo %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Startam ALSA (Advanced Linux Sound Architecture) sistem za zvuk"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron -  podesite period.komande"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd se koristi za pra�enje statusa baterije i logovanje preko syslog.\n"
-"Koristi se i za ga�enje ma�ine (radi i na desktop ma�inama) kada je baterija "
-"slaba"
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Pokre�e komande zakazane at komandom,kao i  batch  komande kao je "
-"optere�enost\n"
-"sistema mala."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardni UNIX program koji pokre�e korisni�ke programe\n"
-"preriodi�no u zakazano vreme. vixie cron  dodaje opcije prostom UNIX cron,"
-"uklju�uju�i bolju  sigurnost i bolju podesivost."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM daje podr�ku za mi�a za teksulano-bazirane aplikacije kao �to je\n"
-"Midnight Commander.Isto tako daje podr�ku za  pop-up menije na  konzoli."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake starta ispitivanje haredvera, i po potrebi �e podesiti \n"
-"novi/izmenjeni hardver."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache je  WWW server. On se koristi da opslu�uje  HTML fajlove\n"
-"i CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interent super server demon (znan kao netd) starta \n"
-"razne internet servise.On je odgovoran za pokretanje mnogix servisa kao npr. "
-"elnet, ftp, rsh, i  rlogin.Isklju�uju�i njega, isklju�ujete i servise \n"
-"za koje je on odgovoran."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pokrenite filtriranje paketa za Linux kernel serije 2.2, da bi podesili\n"
-"firewall radi za�tite va�e ma�ine od mre�nih napada."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ovaj paket aktivira odabranu mapu tastature kako je pode�eno \n"
-"u  /etc/sysconfig/keyboard.Ovo se pode�ava koriste�i kbdconfig alatku.\n"
-"Treba da bude uklju�en na ve�inu ma�ina."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatska regeneracija kernelovog zaglavlja u /boot zar\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatska detekcija i konfiguracija hardvera pri startanju sistema."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf �e ponekad izvoditi razne zadatke tokom\n"
-"startanja sistema radi odr�avanja i pode�avanja sistema."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je print demon potreban  da bi lpr radio dobro.To je \n"
-"u osnovi server koji arbitrira  print poslove �tampa�u(ima)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux-ov Virtuelni Server, koristi se za izgradnju brzog i dostupnog\n"
-"servera."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Nazvan kao (BIND) je Domain Name Server (DNS) koji se koristi za daje host "
-"ime IP adresi."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montiranje i demontiranje svih Mre�nih fajl sistema(NFS), SMB (Lan\n"
-"Manager/Windows), i  NCP (NetWare) ta�aka montiranja. "
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiviranje i deaktiviranje svih mre�nih interfejsa konfigurisanih za "
-"start \n"
-"pri podizanju sistema."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je popularni protokol za razmenu  fajlova preko TCP/IP mre�a.\n"
-"Ovaj servis omogu�ava funkcionalnost NFS servera,koji se konfiguri�e preko \n"
-"/etc/exports datoteke."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je popularni protokol za razmenu  fajlova preko TCP/IP mre�a.\n"
-"Ovaj servis omogu�ava funkcionalnost NFS  file locking funkcije"
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatski uklju�uje numlock taster pod konzolom\n"
-"i u XFree pri startanju."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podr�ka za OKI 4w i kompatibilne mu  win �tampa�e."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA podr�ka  se obi�no koristi za  eternet i modeme u laptopovima.\n"
-"Ne�e se pokrenuti ukoliko nije konfigurisan tako daje bezbedno instaliran \n"
-"na sistemu kom nije potreban."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmaper uravlja  RPC konekcijama,koje koriste\n"
-"protokoli kao NFS i  NIS.Portmap server mora biti pokrenut na ma�inama\n"
-"koje rade kao serveri za protokole koji koriste RPC mehanizam."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix je  Mail Transport Agent,koji u stvaripreme�ta po�tu sa jedne ma�ine "
-"na drugu."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"�uva i obnavlja sistemski  entropy pool za ve�i kvalitet generisanje\n"
-"slu�ajnih brojeva."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Dodeljuje raw ure�aje za blok ure�aje (kao �to su hard disk\n"
-"particije), �to mo�e biti korisno za aplikacije kao �to je Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed demon dozvoljava automatsko IP ruter update-ovanje preko\n"
-"RIP protokola.Dok se RIP dosta korisiti na malim mre�ama,kompleksniji \n"
-" routing protokoli su potrebni za kompleksne mre�e."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokol dozvoljava korisnicima na mre�i da omogu�e\n"
-"merenje performansi za bilo koju ma�inu na toj  mre�i."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokol omogu�ava korisnicima na mre�i da otkriju ko je\n"
-"ulogovan na drugim ma�inama."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokol dozvoljava udaljenim korisnicima da dobiju listu svih\n"
-"korisnika ulogovanih na sistem sa pokrenutim rwho demonom (sli�no finger-u)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Pokre�e sistem za zvuk na va�oj ma�ini"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je objekat pomo�u kog mnogi demoni koriste za logovanje poruka\n"
-"u raznim sistemskim log fajlovima. Dobra je ideja imati uvek pokrenut syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Podi�e drajvere za va�e usb ure�aje."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Pokre�e X Font server (potrebno za pokretanje XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izaberite koje servisi treba automatski da se pokrenu pri startanju"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "�tampanje"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Zajedni�ko deljenje fajlova"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistem"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Udaljena administracija"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Server Baze podataka"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servisi: %d aktiviranih za %d registrovanih"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servisi"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "pokrenuto"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zaustavljeno"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servisi i demoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"�alim ali nema dodatnih informacija\n"
-"o ovom servisu."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Pri startanju"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Protokol za statak sveta"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Internet pristup"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedija - Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Razvojna"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Kontrolni Centar"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Mre�ni interfejs"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB server  host:"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Igre"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Ekspert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-#, fuzzy
-msgid "MandrakeConsulting"
-msgstr "Mandrake Alati za obja�njenja"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instaliram pakete..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ne mogu pro�itati tabelu particija, mnogo je iskvarena za mene :(\n"
-"Poku�a�u dalje zaobilaze�i lo�e particije"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Gre�ka!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ne mogu da prona�em potrebni image fajl `%s'."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Autoinstalacioni konfigurator"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Sada treba da podesite Autoinstalacionu Disketu. Ova opcije je donekle "
-"iopasna i mora se pa�ljivo koristiti.\n"
-"\n"
-"Sa ovom opcijom, mo�i �ete da ponovite instalaciju koju steizveli na ovom "
-"ra�unaru, sa povremenim upitima u cilju izmene odre�enih vrednosti "
-"parametra.\n"
-"\n"
-"RAdi maksimalne sigurnosti, particioniranje i formatiranje nikada ne�e biti "
-"izvo�eno automatskiy, bez obzira �ta izabrali tokom instalacije na ovom "
-"ra�unaru.\n"
-"\n"
-"Da li �elite da nastavite?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Pode�avanje automatizovanih koraka"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"izaberite za svaki korak da li �e biti istovetan i automatizovan ili�e biti "
-"ru�no pode�avan"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Doborodo�li.\n"
-"\n"
-"Parametri za autoinstalaciju su dostupni u delu koji se nalazi levo"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "�estitamo !"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa je uspe�no kreirana.\n"
-"Sada mo�ete ponoviti va�u instalaciju."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Autoinstalacija"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Dodaj vrednost"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Ukloni zadnju vrednost"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Izve�taj \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Daemon Izve�taj\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Detalji Izve�taja\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "ukupan napredak"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Backup sistemskih fajlova..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "backup-ovanje fajlova sa hard diska..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "backup-ovanje korsinikovih fajlova"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Napredak Backup-ovanja hard diska..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "backup-ovanje ostalih fajlova..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"lista fajlova poslana preko FTP-a : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Problemi sa FTP konekcijom: Nije mogu�e poslati va�e backup fajlove "
-"preko FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Gre�ka tokom slanja mail-a. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Odabir fajlova"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Odaberite fajlove ili direktorijume i klinite na 'Dodaj'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Proverite sve opcije koje vam trebaju.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Ove opcije mogu sa�uvati i kasnije obnoviti sve fajlove u va�em /etc "
-"direktorijumu.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Sa�uvajte svoje Sistemske fajlove ( /etc direktorijum )"
-
-#: ../../standalone/drakbackup_.c:793
-#, fuzzy
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-"Koristi Inkrementalni Backup-ove  (ne zamenjuj ih sa starim backup-ovima)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Ne uklju�uj kriti�ne fajlove (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Sa ovom opcijom mo�i �ete da obnovite bilo koju verziju\n"
-" va�eg /etc direktorijuma."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Selektujte sve korisnike koje �elite da uklju�ite u backup."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Ne uklju�uj ke� pretra�iva�a"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-"Koristi Inkrementalni Backup-ove  (ne zamenjuj ih sa starim backup-ovima)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Ukloni Selektovano"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows(FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Korisnici"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Korisiti Use FTP connection to backup"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Molim Vas unesete ime hosta ili IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Unesite direktorijum da bi\n"
-" stavili backup na ovaj host."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Unesite va�e korisni�ko ime"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Unesite va�u lozinku"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Zapamti ovu lozinku"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP konekcija"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Sigurnosna Konekcija"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Koristi CD/DVDROM za backup"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Izaberite va� CD prostor"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Proverite da li koristite CDRW medij"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Proverite da li �elite izbri�ete va� CDRW pre"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Proverite da li �elite da uklju�ite\n"
-" install boot na va� CD."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Unesite ime va�eg CD Writer ure�aja\n"
-" ex: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Koristi traku za backup"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Unesite ime ure�aja koji koristite za backup"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Unesite maksimalnu veli�inu\n"
-" dozvoljenu za Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Unesite direktorijum da bi sa�uvali:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Koristi quota zar backup fajlove"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Mre�a"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "na sat"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "dnevno"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "nedeljno"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "mese�no"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Koristi demon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Izaberite vremenski interval \n"
-"izme�u svakog backup-a"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Izaberite\n"
-"medij za backup."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Koristi hard disk sa demonom"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Koristi FTP sa demonom"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Proverite da li je cron demon uklju�en u va�e servise."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Po�alji mail izve�taj nakon svakog backup/a na :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "�ta"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Gde"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Kada"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Vi�e Opcija"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup Konfiguracija"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Izaberite �ta �elite da backup-ujete"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "na Hard Disk"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "preko Mre�e"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Izaberite �ta �elite da backup-ujete"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Backup-uj sistem"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Backup-uj Korisnike"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Izaberite korisnike ru�no"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Backup Izvori: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Sistemski fajlovi:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Korisni�ki fajlovi:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Ostali fajlovi:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Snimi na Hard Disk na putanju : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Snimi na FTP ili host : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t korisni�ko ime: %s\n"
-"\t\t na putanji: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Opcije:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tNe uklju�uj Sistemske Fajlove\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackup koristi tar i bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackus koristi tar i gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Demonn (%s) uklju�uje :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Hard disk.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Mre�a preko FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Mre�a preko SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Bez konfiguracije, kliknite na �arobnjak ili Napredno\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lista podataka za obnavljanje:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lista korumpiranih podataka:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Deselektujte ili uklonite ih slede�i put."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Backup fajlovi su korumpirani"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Svi va�i selektovani podasi su          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          Uspe�no Obnovljeni na %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "        Obnavljanje Konfiguracije         "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "U Redu za obnavanje drugih fajlova."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Obnavljanje liste korisnika (samo najnoviji podaci po korisniku su va�ni)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Backup sistemskih fajlova pre:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "izaberite datum za obnavljanje"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Koristi Hard Disk za backup"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Povrati (restore) sa Hard Diska"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Unesite direktorijum gde je sme�ten backup"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Izaberitedrugi medij za obnavljanje sa"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Drugi Medij"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Obnovi sistem"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Obnovi korisnike"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Obnovi ostalo"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "izaberite putanju za obnavljanje (umesto /)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Uradi novi backup pre obnavljanja (samo za inkrementalne backup-e.)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Ukloni korisni�ke direktorijume pre obnavljanja"
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Obnovi sve backup-ove"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Obnavljanje po �elji"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Pomo�"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Prethodni"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Sa�uvaj"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Kreiraj backup"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Obnovi"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Slede�i"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Kreirajte backup pre obnavljanja...\n"
-" ili potvrdite da je va�a putanja ispravna."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Gre�ka pri slanju mail-a\n"
-"  va� izve�taj nije poslan\n"
-"  Podesite sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lista paketi za instalaciju"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Gre�ka tokom slanja fajla preko FTP-a.\n"
-" Ispravite va�u FTP konfiguraciju."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Izaberite podatke za obnavljanje..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Izaberite medij koji �elite da korisitite za backup..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Izaberite podatke koji �elite da backup-ujete..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Nije prona�en kofiguracioni fajl \n"
-"Kliknite na �arobnjak ili Napredno."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "U razvoju ... molim Vas sa�ekajte"
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Backup-uj sistemske fajlove"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Backup-uj korisni�ke fajlove"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Backup-uj ostale fajlove"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Ukupni napredak"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "fajlovi poslani preko FTP-a"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "�aljem fajlove..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Lista podataka koje uklju�ujem na CDROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Unesite brzinu cd pisa�a"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Unesite ime va�eg CD Pisa�a (ex: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Proverite da li �elite da uklju�ite install boot na va� CD."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Backup-uj sada iz konfiguracionog fajla"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Pogledaj Backup Konfiguraciju."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "�arobnjak Konfiguracija"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Napredna Konfiguracija"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Backup Sad"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"Opis opcija:\n"
-"\n"
-" U ovom koraku Drakbackup vam omogu�ava da promenite:\n"
-"\n"
-" - Mod kompresije:\n"
-"    \n"
-"      Ukoliko izaberete bzip2 kompresiju, bolje �ete\n"
-"      kompresovati podatke od gzip-a (oko 2-10 %).\n"
-"      Ova opcija nije selektovana po default-u zbog\n"
-"      toga �to ova kompresija zahteva vi�e vremena ( oko 1000% vi�e).\n"
-" \n"
-" - Mod a�uriranja:\n"
-"\n"
-"      Ova opcija �e a�urirati va� backup, ali ova\n"
-"      opcija nije naro�ito prakti�na zato �to morate da\n"
-"      raspakujete va� backup pre nego ga mo�ete a�urirati.\n"
-"      \n"
-" - the .backupignore mod:\n"
-"\n"
-"      Kao sa cvs-om, Drakbackup �e ignorisati sve uklju�ene\n"
-"      reference .backupignore fajlova u svakom direktorijumu.\n"
-"      primer: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Neke gre�ke tokom sendmail-a su uzrokovane \n"
-" lo�om konfiguracijom postfix-a. Da bi ih re�ili morate da\n"
-" podesite myhostname ili mydomain u /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"Opis opcija:\n"
-"\n"
-" - Backup sistemskih fajlova:\n"
-"       \n"
-"\tOva opcija dozvoljava da backup-ujete va� /etc direktorijum,\n"
-"\tkoji sadr�i sve konfiguracione fajlove. Molim Vas da budete\n"
-"\tpa�ljivi tokom obnavljanja da ne bi prepisali slede�e fajlove:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup Korisni�kih fajlova: \n"
-"\n"
-"\tOva opcija vam omogu�ava da selektujete sve korisnike koje �elite \n"
-"\tda backup-ujete.\n"
-"\tDa bi sa�uvali prostor na disku, preporu�ujemo da \n"
-"\tuklju�ujete fajlove iz ke�a internet pretra�iva�a.\n"
-"\n"
-" - Backup Ostalih fajlova: \n"
-"\n"
-"\tOva opcija vam omogu�ava da dodate jo� podataka za Backup.\n"
-"\tSa ovom opcijom trenutno nije mogu�e \n"
-"\tizabrati inkrementalni backup.\t\t\n"
-" \n"
-" - Inkrementalni Backup-ovi:\n"
-"\n"
-"\tInkrementalni backup je najmo�nija \n"
-"\topcija za backup. Ova opcija vam omogu�ava \n"
-"\tda svev va�e podatke prvi put, a \n"
-"\tkasnije samo one izmenjene.\n"
-"\tTada �ete mo�i, tokom obnavljanja\n"
-"\tda obnovite va�e podatke po odre�enom\n"
-"\tdatumu.\n"
-"\tUkoliko niste izabrali ovu opciju svi\n"
-"\tstari backup-ovi su izbrisani pre svakog backup-a.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Opis obnavljanja:\n"